3176 files changed, 14472 insertions, 246726 deletions

diff --git a/include/Kbuild b/include/Kbuild
index bdca155028ec..d8c3e3cbf416 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -1,3 +1,6 @@
+# Top-level Makefile calls into asm-$(ARCH)
+# List only non-arch directories below
+
 header-y += asm-generic/
 header-y += linux/
 header-y += sound/
@@ -5,5 +8,3 @@ header-y += mtd/
 header-y += rdma/
 header-y += video/
 header-y += drm/
-
-header-y += asm-$(ARCH)/
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 1ebbe883f786..13a3d9ad92db 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -277,6 +277,7 @@ enum acpi_prefered_pm_profiles {
 #define BAF_LEGACY_DEVICES              0x0001
 #define BAF_8042_KEYBOARD_CONTROLLER    0x0002
 #define BAF_MSI_NOT_SUPPORTED           0x0008
+#define BAF_PCIE_ASPM_CONTROL           0x0010
 
 #define FADT2_REVISION_ID               3
 #define FADT2_MINUS_REVISION_ID         2
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
index db351d1296f4..a5801ae02e4b 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/include/asm-alpha/dma-mapping.h
@@ -24,8 +24,8 @@
 		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
 #define dma_supported(dev, mask)			\
 		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
-#define dma_mapping_error(addr)				\
-		pci_dma_mapping_error(addr)
+#define dma_mapping_error(dev, addr)				\
+		pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr)
 
 #else	/* no PCI - no IOMMU. */
 
@@ -45,7 +45,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 #define dma_unmap_page(dev, addr, size, dir)	((void)0)
 #define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
 
-#define dma_mapping_error(addr)  (0)
+#define dma_mapping_error(dev, addr)  (0)
 
 #endif	/* !CONFIG_PCI */
 
diff --git a/include/asm-alpha/ide.h b/include/asm-alpha/ide.h
deleted file mode 100644
index f44129abc02c..000000000000
--- a/include/asm-alpha/ide.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/include/asm-alpha/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the alpha architecture specific IDE code.
- */
-
-#ifndef __ASMalpha_IDE_H
-#define __ASMalpha_IDE_H
-
-#ifdef __KERNEL__
-
-static inline int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		default:
-			return 0;
-	}
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-		case 0:	return 0x1f0;
-		case 1:	return 0x170;
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		default:
-			return 0;
-	}
-}
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMalpha_IDE_H */
diff --git a/include/asm-alpha/kvm.h b/include/asm-alpha/kvm.h
deleted file mode 100644
index b9daec429689..000000000000
--- a/include/asm-alpha/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_ALPHA_H
-#define __LINUX_KVM_ALPHA_H
-
-/* alpha does not support KVM */
-
-#endif
diff --git a/include/asm-alpha/namei.h b/include/asm-alpha/namei.h
deleted file mode 100644
index 5cc9bb39499d..000000000000
--- a/include/asm-alpha/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
- * linux/include/asm-alpha/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ALPHA_NAMEI_H
-#define __ALPHA_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __ALPHA_NAMEI_H */
diff --git a/include/asm-alpha/page.h b/include/asm-alpha/page.h
index 22ff9762d17b..0995f9d13417 100644
--- a/include/asm-alpha/page.h
+++ b/include/asm-alpha/page.h
@@ -80,9 +80,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
 #define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
 #ifndef CONFIG_DISCONTIGMEM
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
index d31fd49ff79a..2a14302c17a3 100644
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -106,7 +106,7 @@ extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
 /* Test for pci_map_single or pci_map_page having generated an error.  */
 
 static inline int
-pci_dma_mapping_error(dma_addr_t dma_addr)
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
 {
 	return dma_addr == 0;
 }
diff --git a/include/asm-alpha/semaphore.h b/include/asm-alpha/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-alpha/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-alpha/socket.h b/include/asm-alpha/socket.h
index 08c979319929..a1057c2d95e7 100644
--- a/include/asm-alpha/socket.h
+++ b/include/asm-alpha/socket.h
@@ -62,4 +62,9 @@
 
 #define SO_MARK			36
 
+/* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
+ * have to define SOCK_NONBLOCK to a different value here.
+ */
+#define SOCK_NONBLOCK	0x40000000
+
 #endif /* _ASM_SOCKET_H */
diff --git a/include/asm-alpha/thread_info.h b/include/asm-alpha/thread_info.h
index fb3185196298..15fda4344424 100644
--- a/include/asm-alpha/thread_info.h
+++ b/include/asm-alpha/thread_info.h
@@ -50,10 +50,8 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
 /* Thread information allocation.  */
+#define THREAD_SIZE_ORDER 1
 #define THREAD_SIZE (2*PAGE_SIZE)
-#define alloc_thread_info(tsk) \
-  ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/include/asm-arm/Kbuild b/include/asm-arm/Kbuild
deleted file mode 100644
index 73237bd130a2..000000000000
--- a/include/asm-arm/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-unifdef-y += hwcap.h
diff --git a/include/asm-arm/a.out-core.h b/include/asm-arm/a.out-core.h
deleted file mode 100644
index 93d04acaa31f..000000000000
--- a/include/asm-arm/a.out-core.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
-	struct task_struct *tsk = current;
-
-	dump->magic = CMAGIC;
-	dump->start_code = tsk->mm->start_code;
-	dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
-	dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
-	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	dump->u_ssize = 0;
-
-	dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
-	dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
-	dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
-	dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
-	dump->u_debugreg[4] = tsk->thread.debug.nsaved;
-
-	if (dump->start_stack < 0x04000000)
-		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
-	dump->regs = *regs;
-	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff --git a/include/asm-arm/a.out.h b/include/asm-arm/a.out.h
deleted file mode 100644
index 79489fdcc8b8..000000000000
--- a/include/asm-arm/a.out.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <asm/types.h>
-
-struct exec
-{
-  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
-  __u32 a_text;		/* length of text, in bytes */
-  __u32 a_data;		/* length of data, in bytes */
-  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
-  __u32 a_syms;		/* length of symbol table data in file, in bytes */
-  __u32 a_entry;	/* start address */
-  __u32 a_trsize;	/* length of relocation info for text, in bytes */
-  __u32 a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a)	(0x00008000)
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT	(0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
deleted file mode 100644
index a6d1ee0980f2..000000000000
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/aaec2000.h
- *
- *  AAEC-2000 registers definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAEC2000_H
-#define __ASM_ARCH_AAEC2000_H
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not this file
-#endif /* __ASM_ARCH_HARDWARE_H */
-
-/* Chip selects */
-#define AAEC_CS0	0x00000000
-#define AAEC_CS1	0x10000000
-#define AAEC_CS2	0x20000000
-#define AAEC_CS3	0x30000000
-
-/* Flash */
-#define AAEC_FLASH_BASE	AAEC_CS0
-#define AAEC_FLASH_SIZE	SZ_64M
-
-/* Interrupt controller */
-#define IRQ_BASE	__REG(0x80000500)
-#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
-#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
-#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
-#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
-
-/* UART 1 */
-#define UART1_BASE	__REG(0x80000600)
-#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
-#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
-#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
-#define UART1_CR	__REG(0x8000060c) /* Control Register */
-#define UART1_SR	__REG(0x80000610) /* Status Register */
-#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
-#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
-#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
-
-/* UART 2 */
-#define UART2_BASE	__REG(0x80000700)
-#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
-#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
-#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
-#define UART2_CR	__REG(0x8000070c) /* Control Register */
-#define UART2_SR	__REG(0x80000710) /* Status Register */
-#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
-#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
-#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
-
-/* UART 3 */
-#define UART3_BASE	__REG(0x80000800)
-#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
-#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
-#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
-#define UART3_CR	__REG(0x8000080c) /* Control Register */
-#define UART3_SR	__REG(0x80000810) /* Status Register */
-#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
-#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
-#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
-
-/* These are used in some places */
-#define _UART1_BASE __PREG(UART1_BASE)
-#define _UART2_BASE __PREG(UART2_BASE)
-#define _UART3_BASE __PREG(UART3_BASE)
-
-/* UART Registers Offsets */
-#define UART_DR		0x00
-#define UART_LCR	0x04
-#define UART_BRCR	0x08
-#define UART_CR		0x0c
-#define UART_SR		0x10
-#define UART_INT	0x14
-#define UART_INTM	0x18
-#define UART_INTRES	0x1c
-
-/* UART_LCR Bitmask */
-#define UART_LCR_BRK	(1 << 0) /* Send Break */
-#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
-#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
-#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
-#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
-#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
-#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
-#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
-#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
-
-/* UART_CR Bitmask */
-#define UART_CR_EN	(1 << 0) /* UART Enable */
-#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
-#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
-#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
-#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
-#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
-#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
-
-/* UART_SR Bitmask */
-#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
-#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
-#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
-#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
-#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
-#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
-#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
-#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
-
-/* UART_INT Bitmask */
-#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
-#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
-#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
-#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
-
-/* Timer 1 */
-#define TIMER1_BASE	__REG(0x80000c00)
-#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
-#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
-#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
-#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
-
-/* Timer 2 */
-#define TIMER2_BASE	__REG(0x80000d00)
-#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
-#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
-#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
-#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
-
-/* Timer 3 */
-#define TIMER3_BASE	__REG(0x80000e00)
-#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
-#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
-#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
-#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
-
-/* Timer Control register bits */
-#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
-#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
-#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
-#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
-#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
-
-/* Power and State Control */
-#define POWER_BASE	__REG(0x80000400)
-#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
-#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
-#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
-#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
-#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
-#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
-#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
-#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
-#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
-
-/* GPIO Registers */
-#define AAEC_GPIO_PHYS	0x80000e00
-
-#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
-#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
-#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
-#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
-#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
-#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
-#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
-#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
-#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
-#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
-#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
-#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
-#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
-#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
-#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
-#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
-#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
-#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
-#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
-#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
-#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
-#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
-#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
-#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
-#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
-#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
-#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
-#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
-#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
-#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
-#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
-#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
-#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
-#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
-
-#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
-#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
-#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
-#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
-
-/* LCD Controller */
-#define AAEC_CLCD_PHYS	0x80003000
-
-#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h
deleted file mode 100644
index bc76d2badb91..000000000000
--- a/include/asm-arm/arch-aaec2000/aaed2000.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/aaed2000.h
- *
- *  AAED-2000 specific bits definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAED2000_H
-#define __ASM_ARCH_AAED2000_H
-
-/* External GPIOs. */
-
-#define EXT_GPIO_PBASE	AAEC_CS3
-#define EXT_GPIO_VBASE	0xf8100000
-#define EXT_GPIO_LENGTH	0x00001000
-
-#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
-#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
-
-#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
-#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
-
-#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
-
-#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
-#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
-#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
-#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
-#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
-#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
-#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
-#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
-
-
-#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S
deleted file mode 100644
index 7b1fce021d8a..000000000000
--- a/include/asm-arm/arch-aaec2000/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*  linux/include/asm-arm/arch-aaec2000/debug-macro.S
- *
- *  Debugging macro include header
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include "hardware.h"
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000		@ physical
-		movne	\rx, #io_p2v(0x80000000)	@ virtual
-		orr	\rx, \rx, #0x00000800
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 7)
-		beq	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#if 0
-1001:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 5)
-		beq	1001b
-#endif
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h
deleted file mode 100644
index e100b1e526fe..000000000000
--- a/include/asm-arm/arch-aaec2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/dma.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S
deleted file mode 100644
index 83fdf68f6b7c..000000000000
--- a/include/asm-arm/arch-aaec2000/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/entry-macro.S
- *
- *  Low-level IRQ helper for aaec-2000 based platforms
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xf8000000
-		add	r4, r4, #0x00000500
-		mov	\base, r4
-		ldr	\irqstat, [\base, #0]
-		cmp	\irqstat, #0
-		bne	1001f
-		ldr	\irqnr, =NR_IRQS+1
-		b       1003f
-1001:		mov	\irqnr, #0
-1002:		ands	\tmp, \irqstat, #1
-		mov	\irqstat, \irqstat, LSR #1
-		add	\irqnr, \irqnr, #1
-		beq	1002b
-		sub	\irqnr, \irqnr, #1
-1003:
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
deleted file mode 100644
index 153506fd06ed..000000000000
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/hardware.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/aaec2000.h>
-
-/* The kernel is loaded at physical address 0xf8000000.
- * We map the IO space a bit after
- */
-#define PIO_APB_BASE	0x80000000
-#define VIO_APB_BASE	0xf8000000
-#define IO_APB_LENGTH	0x2000
-#define PIO_AHB_BASE	0x80002000
-#define VIO_AHB_BASE	0xf8002000
-#define IO_AHB_LENGTH	0x2000
-
-#define VIO_BASE    VIO_APB_BASE
-#define PIO_BASE    PIO_APB_BASE
-
-#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
-#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-/* FIXME: Is it needed to optimize this a la pxa ?? */
-#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
-#define __PREG(x)   (io_v2p((u32)&(x)))
-
-#else /* __ASSEMBLY__ */
-
-#define __REG(x)    io_p2v(x)
-#define __PREG(x)   io_v2p(x)
-
-#endif
-
-#include "aaec2000.h"
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
deleted file mode 100644
index d710204ac747..000000000000
--- a/include/asm-arm/arch-aaec2000/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/io.h
- *
- *  Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h
deleted file mode 100644
index de252220e806..000000000000
--- a/include/asm-arm/arch-aaec2000/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/irqs.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
-#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
-#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
-#define INT_MV_FIQ	3  /* Media Changed Interrupt */
-#define INT_SC		4  /* Sound Codec Interrupt */
-#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
-#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
-#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
-#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
-#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
-#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
-#define INT_TICK	11 /* 64Hz Tick Interrupt */
-#define INT_UART1	12 /* UART1 Interrupt */
-#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
-#define INT_LCD		14 /* LCD Interrupt */
-#define INT_SSI		15 /* SSI End of Transfer Interrupt */
-#define INT_UART3	16 /* UART3 Interrupt */
-#define INT_SCI		17 /* SCI Interrupt */
-#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
-#define INT_MMC		19 /* MMC Interrupt */
-#define INT_USB		20 /* USB Interrupt */
-#define INT_DMA		21 /* DMA Interrupt */
-#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
-#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
-#define INT_BMI		27 /* BMI Interrupt */
-
-#define NR_IRQS		(INT_BMI + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
deleted file mode 100644
index 9eceb4148922..000000000000
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/memory.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#define PHYS_OFFSET	UL(0xf0000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h
deleted file mode 100644
index 08de97b407a8..000000000000
--- a/include/asm-arm/arch-aaec2000/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaed2000/system.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h
deleted file mode 100644
index f5708b38fb7f..000000000000
--- a/include/asm-arm/arch-aaec2000/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/timex.h
- *
- *  AAEC-2000 Architecture timex specification
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		508000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h
deleted file mode 100644
index 300f4bf3bc74..000000000000
--- a/include/asm-arm/arch-aaec2000/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/uncompress.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include "hardware.h"
-
-#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-        do {
-		serial_port = _UART3_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART1_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART2_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while ((UART(UART_SR) & UART_SR_TxFF))
-		barrier();
-
-	/* send the character out. */
-	UART(UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h
deleted file mode 100644
index ecb991e2e4ff..000000000000
--- a/include/asm-arm/arch-aaec2000/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/vmalloc.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h
deleted file mode 100644
index 6d71ea2637b1..000000000000
--- a/include/asm-arm/arch-at91/at91_adc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR		0x00		/* Control Register */
-#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
-#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
-
-#define AT91_ADC_MR		0x04		/* Mode Register */
-#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
-#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
-#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
-#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
-#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
-#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
-#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
-#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
-#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
-#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
-#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
-#define			AT91_ADC_STARTUP_(x)	((x) << 16)
-#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
-#define			AT91_ADC_SHTIM_(x)	((x) << 24)
-
-#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
-#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
-#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
-#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
-
-#define AT91_ADC_SR		0x1C		/* Status Register */
-#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
-#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
-#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
-#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
-#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
-#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
-
-#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
-#define		AT91_ADC_LDATA		(0x3ff)
-
-#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
-
-#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
-#define		AT91_ADC_DATA		(0x3ff)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h
deleted file mode 100644
index df44c12a12d4..000000000000
--- a/include/asm-arm/arch-at91/at91_aic.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
-#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
-#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
-#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
-#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
-#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
-#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
-
-#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
-#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
-#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
-#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
-#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
-#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
-#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
-
-#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
-#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
-#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
-#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
-#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
-
-#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
deleted file mode 100644
index 8019ffd0ad3b..000000000000
--- a/include/asm-arm/arch-at91/at91_dbgu.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#ifdef AT91_DBGU
-#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
-#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
-#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
-#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
-#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
-#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
-#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
-#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
-#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
-#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
-#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
-#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
-#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
-#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
-
-#endif /* AT91_DBGU */
-
-/*
- * Some AT91 parts that don't have full DEBUG units still support the ID
- * and extensions register.
- */
-#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
-#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
-#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
-#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
-#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
-#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
-#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
-#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
-#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
-#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
-#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
-#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
-#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
-#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
-#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
-#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
-#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
-#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
-#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
-#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
-#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
-#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
deleted file mode 100644
index 1e5a8caca2d1..000000000000
--- a/include/asm-arm/arch-at91/at91_ecc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_ecc.h
- *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef AT91_ECC_H
-#define AT91_ECC_H
-
-#define AT91_ECC_CR		0x00			/* Control register */
-#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
-
-#define AT91_ECC_MR		0x04			/* Mode register */
-#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-#define			AT91_ECC_PAGESIZE_528		(0)
-#define			AT91_ECC_PAGESIZE_1056		(1)
-#define			AT91_ECC_PAGESIZE_2112		(2)
-#define			AT91_ECC_PAGESIZE_4224		(3)
-
-#define AT91_ECC_SR		0x08			/* Status register */
-#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
-
-#define AT91_ECC_PR		0x0c			/* Parity register */
-#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
-
-#define AT91_ECC_NPR		0x10			/* NParity register */
-#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
deleted file mode 100644
index 400ec10014b4..000000000000
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR		0x00		/* Control Register */
-#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
-#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
-#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
-#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
-#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define AT91_MCI_MR		0x04		/* Mode Register */
-#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
-#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
-#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
-#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
-#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
-#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
-#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
-#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
-
-#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
-#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
-#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
-#define		AT91_MCI_DTOMUL_1		(0 <<  4)
-#define		AT91_MCI_DTOMUL_16		(1 <<  4)
-#define		AT91_MCI_DTOMUL_128		(2 <<  4)
-#define		AT91_MCI_DTOMUL_256		(3 <<  4)
-#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
-#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
-#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
-#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
-
-#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
-#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
-#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR		0x10		/* Argument Register */
-
-#define AT91_MCI_CMDR		0x14		/* Command Register */
-#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
-#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
-#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
-#define			AT91_MCI_RSPTYP_48	(1 <<  6)
-#define			AT91_MCI_RSPTYP_136	(2 <<  6)
-#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
-#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
-#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
-#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
-#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
-#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
-#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
-#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
-#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
-#define			AT91_MCI_TRCMD_NONE	(0 << 16)
-#define			AT91_MCI_TRCMD_START	(1 << 16)
-#define			AT91_MCI_TRCMD_STOP	(2 << 16)
-#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
-#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
-#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
-#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
-#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
-
-#define AT91_MCI_BLKR		0x18		/* Block Register */
-#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
-#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
-
-#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
-#define AT91_MCR_RDR		0x30		/* Receive Data Register */
-#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
-
-#define AT91_MCI_SR		0x40		/* Status Register */
-#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
-#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
-#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
-#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
-#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
-#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
-#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
-#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
-#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
-#define		AT91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B */
-#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
-#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
-#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
-#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
-#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
-#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
-#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
-#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
-#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
-#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
-#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
-
-#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
-#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
-#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h
deleted file mode 100644
index 84c3866d309f..000000000000
--- a/include/asm-arm/arch-at91/at91_pio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER		0x00	/* Enable Register */
-#define PIO_PDR		0x04	/* Disable Register */
-#define PIO_PSR		0x08	/* Status Register */
-#define PIO_OER		0x10	/* Output Enable Register */
-#define PIO_ODR		0x14	/* Output Disable Register */
-#define PIO_OSR		0x18	/* Output Status Register */
-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-#define PIO_SODR	0x30	/* Set Output Data Register */
-#define PIO_CODR	0x34	/* Clear Output Data Register */
-#define PIO_ODSR	0x38	/* Output Data Status Register */
-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-#define PIO_IER		0x40	/* Interrupt Enable Register */
-#define PIO_IDR		0x44	/* Interrupt Disable Register */
-#define PIO_IMR		0x48	/* Interrupt Mask Register */
-#define PIO_ISR		0x4c	/* Interrupt Status Register */
-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-#define PIO_PUER	0x64	/* Pull-up Enable Register */
-#define PIO_PUSR	0x68	/* Pull-up Status Register */
-#define PIO_ASR		0x70	/* Peripheral A Select Register */
-#define PIO_BSR		0x74	/* Peripheral B Select Register */
-#define PIO_ABSR	0x78	/* AB Status Register */
-#define PIO_OWER	0xa0	/* Output Write Enable Register */
-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-#define PIO_OWSR	0xa8	/* Output Write Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h
deleted file mode 100644
index 5026325a5ae4..000000000000
--- a/include/asm-arm/arch-at91/at91_pit.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pit.h
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
deleted file mode 100644
index 2001e81f2267..000000000000
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
-
-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
-#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
-#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
-#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
-#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
-#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
-#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
-#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
-
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
-#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
-#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
-#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
-
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
-#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
-#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-
-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
-#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
-#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-
-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
-#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
-#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
-#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
-#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
-#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
-#define			AT91_PMC_USBDIV_1		(0 << 28)
-#define			AT91_PMC_USBDIV_2		(1 << 28)
-#define			AT91_PMC_USBDIV_4		(2 << 28)
-#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
-
-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
-#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
-#define			AT91_PMC_CSS_SLOW		(0 << 0)
-#define			AT91_PMC_CSS_MAIN		(1 << 0)
-#define			AT91_PMC_CSS_PLLA		(2 << 0)
-#define			AT91_PMC_CSS_PLLB		(3 << 0)
-#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << 2)
-#define			AT91_PMC_PRES_2			(1 << 2)
-#define			AT91_PMC_PRES_4			(2 << 2)
-#define			AT91_PMC_PRES_8			(3 << 2)
-#define			AT91_PMC_PRES_16		(4 << 2)
-#define			AT91_PMC_PRES_32		(5 << 2)
-#define			AT91_PMC_PRES_64		(6 << 2)
-#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
-#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
-#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
-#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
-#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
-#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
-#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
-#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
-#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
-#define			AT91_PMC_PDIV_1			(0 << 12)
-#define			AT91_PMC_PDIV_2			(1 << 12)
-
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
-
-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
-#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
-#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
-#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
-#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
-#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
deleted file mode 100644
index fb8d1618a231..000000000000
--- a/include/asm-arm/arch-at91/at91_rstc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rstc.h
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
-#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
-#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
-#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
-#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
-#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
-#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
-#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
-#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
-#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
-#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
-#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
-#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
-#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
-#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
-#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h
deleted file mode 100644
index af9bd28174c0..000000000000
--- a/include/asm-arm/arch-at91/at91_rtc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
-
-#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
-#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
-
-#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
-
-#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
-
-#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
-
-#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
-
-#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
-
-#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
-#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
-#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
-#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
-
-#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
deleted file mode 100644
index 39a32633b275..000000000000
--- a/include/asm-arm/arch-at91/at91_rtt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_rtt.h
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
-#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
-#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
-#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
-#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
-
-#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
-#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
-
-#define AT91_RTT_VR		0x08			/* Real-time Value Register */
-#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
-
-#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
-#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
-#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h
deleted file mode 100644
index 581fa41d90e8..000000000000
--- a/include/asm-arm/arch-at91/at91_shdwc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_shdwc.h
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
-#define		AT91_SHDW_SHDW		(1    << 0)		/* Shut Down command */
-#define		AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
-#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
-#define			AT91_SHDW_WKMODE0_NONE		0
-#define			AT91_SHDW_WKMODE0_HIGH		1
-#define			AT91_SHDW_WKMODE0_LOW		2
-#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
-#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
-#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
-#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
-
-#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
-#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
-#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
-#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
deleted file mode 100644
index f9b9a8464997..000000000000
--- a/include/asm-arm/arch-at91/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR			0x00		/* Control Register */
-#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
-#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
-#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
-#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR			0x04		/* Mode Register */
-#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
-#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
-#define			AT91_SPI_PS_FIXED	(0 << 1)
-#define			AT91_SPI_PS_VARIABLE	(1 << 1)
-#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
-#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
-#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
-#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
-#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR		0x08			/* Receive Data Register */
-#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-
-#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
-#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR		0x10			/* Status Register */
-#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
-#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
-#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
-#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
-#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
-#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
-#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
-#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
-#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
-#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
-#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
-
-#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
-#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
-#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
-#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
-#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
-#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
-#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
-#define			AT91_SPI_BITS_8		(0 << 4)
-#define			AT91_SPI_BITS_9		(1 << 4)
-#define			AT91_SPI_BITS_10	(2 << 4)
-#define			AT91_SPI_BITS_11	(3 << 4)
-#define			AT91_SPI_BITS_12	(4 << 4)
-#define			AT91_SPI_BITS_13	(5 << 4)
-#define			AT91_SPI_BITS_14	(6 << 4)
-#define			AT91_SPI_BITS_15	(7 << 4)
-#define			AT91_SPI_BITS_16	(8 << 4)
-#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
-#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
-#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h
deleted file mode 100644
index 0ecc73460b50..000000000000
--- a/include/asm-arm/arch-at91/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR		0x00	/* Control Register */
-#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
-#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
-#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
-#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
-#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
-
-#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
-#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
-
-#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
-#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
-#define			AT91_SSC_CKS_DIV		(0 << 0)
-#define			AT91_SSC_CKS_CLOCK		(1 << 0)
-#define			AT91_SSC_CKS_PIN		(2 << 0)
-#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
-#define			AT91_SSC_CKO_NONE		(0 << 2)
-#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
-#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
-#define			AT91_SSC_CKI_FALLING		(0 << 5)
-#define			AT91_SSC_CK_RISING		(1 << 5)
-#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define			AT91_SSC_CKG_NONE		(0 << 6)
-#define			AT91_SSC_CKG_RFLOW		(1 << 6)
-#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
-#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
-#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
-#define			AT91_SSC_START_TX_RX		(1 << 8)
-#define			AT91_SSC_START_LOW_RF		(2 << 8)
-#define			AT91_SSC_START_HIGH_RF		(3 << 8)
-#define			AT91_SSC_START_FALLING_RF	(4 << 8)
-#define			AT91_SSC_START_RISING_RF	(5 << 8)
-#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
-#define			AT91_SSC_START_EDGE_RF		(7 << 8)
-#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
-#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
-#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
-
-#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
-#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
-#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
-#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
-#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
-#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
-#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
-#define			AT91_SSC_FSOS_NONE		(0 << 20)
-#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
-#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
-#define			AT91_SSC_FSOS_LOW		(3 << 20)
-#define			AT91_SSC_FSOS_HIGH		(4 << 20)
-#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
-#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
-#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
-#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
-
-#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
-#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
-#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
-#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
-#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
-#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR		0x40	/* Status Register */
-#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
-#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
-#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
-#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
-#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
-#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
-#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
-#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
-#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
-#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
-#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
-#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
-#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
-#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
-
-#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
-#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
-#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_st.h b/include/asm-arm/arch-at91/at91_st.h
deleted file mode 100644
index 30446e2ea772..000000000000
--- a/include/asm-arm/arch-at91/at91_st.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
-#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
-#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h
deleted file mode 100644
index b85d3faeef5c..000000000000
--- a/include/asm-arm/arch-at91/at91_tc.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
-#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
-
-#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
-#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
-#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
-#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
-#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
-#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
-#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
-#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
-#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
-#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
-#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
-#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
-#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
-#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
-#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
-#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
-
-
-#define AT91_TC_CCR		0x00		/* Channel Control Register */
-#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
-#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
-#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
-
-#define AT91_TC_CMR		0x04		/* Channel Mode Register */
-#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
-#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
-#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
-#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
-#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
-#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
-#define			AT91_TC_XC0			(5 << 0)
-#define			AT91_TC_XC1			(6 << 0)
-#define			AT91_TC_XC2			(7 << 0)
-#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
-#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
-#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
-#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
-#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
-#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
-#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
-#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
-#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
-
-#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
-#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
-#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
-#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
-#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
-#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
-#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
-#define			AT91_TC_EEVT_TIOB		(0 << 10)
-#define			AT91_TC_EEVT_XC0		(1 << 10)
-#define			AT91_TC_EEVT_XC1		(2 << 10)
-#define			AT91_TC_EEVT_XC2		(3 << 10)
-#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
-#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
-#define			AT91_TC_WAVESEL_UP		(0 << 13)
-#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
-#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
-#define			AT91_TC_ACPA_NONE		(0 << 16)
-#define			AT91_TC_ACPA_SET		(1 << 16)
-#define			AT91_TC_ACPA_CLEAR		(2 << 16)
-#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
-#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
-#define			AT91_TC_ACPC_NONE		(0 << 18)
-#define			AT91_TC_ACPC_SET		(1 << 18)
-#define			AT91_TC_ACPC_CLEAR		(2 << 18)
-#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
-#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
-#define			AT91_TC_AEEVT_NONE		(0 << 20)
-#define			AT91_TC_AEEVT_SET		(1 << 20)
-#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
-#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
-#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
-#define			AT91_TC_ASWTRG_NONE		(0 << 22)
-#define			AT91_TC_ASWTRG_SET		(1 << 22)
-#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
-#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
-#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
-#define			AT91_TC_BCPB_NONE		(0 << 24)
-#define			AT91_TC_BCPB_SET		(1 << 24)
-#define			AT91_TC_BCPB_CLEAR		(2 << 24)
-#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
-#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
-#define			AT91_TC_BCPC_NONE		(0 << 26)
-#define			AT91_TC_BCPC_SET		(1 << 26)
-#define			AT91_TC_BCPC_CLEAR		(2 << 26)
-#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
-#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
-#define			AT91_TC_BEEVT_NONE		(0 << 28)
-#define			AT91_TC_BEEVT_SET		(1 << 28)
-#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
-#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
-#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
-#define			AT91_TC_BSWTRG_NONE		(0 << 30)
-#define			AT91_TC_BSWTRG_SET		(1 << 30)
-#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
-#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
-
-#define AT91_TC_CV		0x10		/* Counter Value */
-#define AT91_TC_RA		0x14		/* Register A */
-#define AT91_TC_RB		0x18		/* Register B */
-#define AT91_TC_RC		0x1c		/* Register C */
-
-#define AT91_TC_SR		0x20		/* Status Register */
-#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
-#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
-#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
-#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
-#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
-#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
-#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
-#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
-#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
-#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
-#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
-
-#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
deleted file mode 100644
index f9f2e3cd95c5..000000000000
--- a/include/asm-arm/arch-at91/at91_twi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define	AT91_TWI_CR		0x00		/* Control Register */
-#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
-#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
-#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
-#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
-#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
-#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
-#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
-#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
-#define			AT91_TWI_IADRSZ_NO		(0 << 8)
-#define			AT91_TWI_IADRSZ_1		(1 << 8)
-#define			AT91_TWI_IADRSZ_2		(2 << 8)
-#define			AT91_TWI_IADRSZ_3		(3 << 8)
-#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
-#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
-
-#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
-#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
-
-#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
-
-#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
-#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
-#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
-#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
-
-#define	AT91_TWI_SR		0x20		/* Status Register */
-#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
-#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
-#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
-#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
-#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
-#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
-#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
-#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
-#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
-#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
-#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
-#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
-
-#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
-#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
-#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
-#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
-#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
-
-#endif
-
diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h
deleted file mode 100644
index 1014e9bf181f..000000000000
--- a/include/asm-arm/arch-at91/at91_wdt.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_wdt.h
- *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_WDT_H
-#define AT91_WDT_H
-
-#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
-
-#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
deleted file mode 100644
index 6f14d9053ac7..000000000000
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0		8	/* USART 0 */
-#define AT91CAP9_ID_US1		9	/* USART 1 */
-#define AT91CAP9_ID_US2		10	/* USART 2 */
-#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN		13	/* CAN */
-#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
-#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC	22	/* Ethernet */
-#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
-#define AT91CAP9_ID_DMA		27	/* DMA Controller */
-#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP		29	/* USB Host Port */
-#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS		0xfff78000
-#define AT91CAP9_BASE_TCB0		0xfff7c000
-#define AT91CAP9_BASE_TC0		0xfff7c000
-#define AT91CAP9_BASE_TC1		0xfff7c040
-#define AT91CAP9_BASE_TC2		0xfff7c080
-#define AT91CAP9_BASE_MCI0		0xfff80000
-#define AT91CAP9_BASE_MCI1		0xfff84000
-#define AT91CAP9_BASE_TWI		0xfff88000
-#define AT91CAP9_BASE_US0		0xfff8c000
-#define AT91CAP9_BASE_US1		0xfff90000
-#define AT91CAP9_BASE_US2		0xfff94000
-#define AT91CAP9_BASE_SSC0		0xfff98000
-#define AT91CAP9_BASE_SSC1		0xfff9c000
-#define AT91CAP9_BASE_AC97C		0xfffa0000
-#define AT91CAP9_BASE_SPI0		0xfffa4000
-#define AT91CAP9_BASE_SPI1		0xfffa8000
-#define AT91CAP9_BASE_CAN		0xfffac000
-#define AT91CAP9_BASE_PWMC		0xfffb8000
-#define AT91CAP9_BASE_EMAC		0xfffbc000
-#define AT91CAP9_BASE_ADC		0xfffc0000
-#define AT91CAP9_BASE_ISI		0xfffc4000
-#define AT91_BASE_SYS			0xffffe200
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
-#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91CAP9_BASE_US0
-#define AT91_USART1	AT91CAP9_BASE_US1
-#define AT91_USART2	AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
-
-#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
deleted file mode 100644
index efdb23af1ee4..000000000000
--- a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
- *
- * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_DDRSDR_H
-#define AT91CAP9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
-#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_DDRSDRC_MODE_NORMAL		0
-#define			AT91_DDRSDRC_MODE_NOP		1
-#define			AT91_DDRSDRC_MODE_PRECHARGE	2
-#define			AT91_DDRSDRC_MODE_LMR		3
-#define			AT91_DDRSDRC_MODE_REFRESH	4
-#define			AT91_DDRSDRC_MODE_EXT_LMR	5
-#define			AT91_DDRSDRC_MODE_DEEP		6
-
-#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
-#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
-#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
-#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
-#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
-#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
-#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
-#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
-#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
-#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
-#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_DDRSDRC_NR_11	(0 << 2)
-#define			AT91_DDRSDRC_NR_12	(1 << 2)
-#define			AT91_DDRSDRC_NR_13	(2 << 2)
-#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
-#define			AT91_DDRSDRC_CAS_2	(2 << 4)
-#define			AT91_DDRSDRC_CAS_3	(3 << 4)
-#define			AT91_DDRSDRC_CAS_25	(6 << 4)
-#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
-#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-
-#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
-#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
-#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
-#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
-#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
-#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
-#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
-#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
-#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
-#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
-#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
-#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
-
-#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
-#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_DDRSDRC_LPCB_DISABLE		0
-#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
-#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
-#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
-#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_DDRSDRC_MD_SDR		0
-#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91_DDRSDRC_MD_DDR		2
-#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-
-#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
-#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
-#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
-#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
-#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
deleted file mode 100644
index ddbd4873c842..000000000000
--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91cap9_matrix.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
-#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
-#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-#define		AT91_MATRIX_RCB9		(1 << 9)
-#define		AT91_MATRIX_RCB10		(1 << 10)
-#define		AT91_MATRIX_RCB11		(1 << 11)
-
-#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
-#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
-#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
-#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h
deleted file mode 100644
index e8fc0b1c33f4..000000000000
--- a/include/asm-arm/arch-at91/at91rm9200.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripheral */
-#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91RM9200_ID_US0	6	/* USART 0 */
-#define AT91RM9200_ID_US1	7	/* USART 1 */
-#define AT91RM9200_ID_US2	8	/* USART 2 */
-#define AT91RM9200_ID_US3	9	/* USART 3 */
-#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP	11	/* USB Device Port */
-#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
-#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
-#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
-#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
-#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
-#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
-#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
-#define AT91RM9200_ID_UHP	23	/* USB Host port */
-#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0	0xfffa0000
-#define AT91RM9200_BASE_TC0	0xfffa0000
-#define AT91RM9200_BASE_TC1	0xfffa0040
-#define AT91RM9200_BASE_TC2	0xfffa0080
-#define AT91RM9200_BASE_TCB1	0xfffa4000
-#define AT91RM9200_BASE_TC3	0xfffa4000
-#define AT91RM9200_BASE_TC4	0xfffa4040
-#define AT91RM9200_BASE_TC5	0xfffa4080
-#define AT91RM9200_BASE_UDP	0xfffb0000
-#define AT91RM9200_BASE_MCI	0xfffb4000
-#define AT91RM9200_BASE_TWI	0xfffb8000
-#define AT91RM9200_BASE_EMAC	0xfffbc000
-#define AT91RM9200_BASE_US0	0xfffc0000
-#define AT91RM9200_BASE_US1	0xfffc4000
-#define AT91RM9200_BASE_US2	0xfffc8000
-#define AT91RM9200_BASE_US3	0xfffcc000
-#define AT91RM9200_BASE_SSC0	0xfffd0000
-#define AT91RM9200_BASE_SSC1	0xfffd4000
-#define AT91RM9200_BASE_SSC2	0xfffd8000
-#define AT91RM9200_BASE_SPI	0xfffe0000
-#define AT91_BASE_SYS		0xfffff000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
-#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
-#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
-#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
-#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
-
-#define AT91_USART0	AT91RM9200_BASE_US0
-#define AT91_USART1	AT91RM9200_BASE_US1
-#define AT91_USART2	AT91RM9200_BASE_US2
-#define AT91_USART3	AT91RM9200_BASE_US3
-
-#define AT91_MATRIX	0	/* not supported */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h
deleted file mode 100644
index 0c417af5fe7f..000000000000
--- a/include/asm-arm/arch-at91/at91rm9200_emac.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define	AT91_EMAC_CTL		0x00	/* Control Register */
-#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
-#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
-#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
-#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
-#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
-#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
-#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
-#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
-#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
-
-#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
-#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
-#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
-#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
-#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
-#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
-#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
-#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
-#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
-#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
-#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
-#define		AT91_EMAC_CLK_DIV8		(0 << 10)
-#define		AT91_EMAC_CLK_DIV16		(1 << 10)
-#define		AT91_EMAC_CLK_DIV32		(2 << 10)
-#define		AT91_EMAC_CLK_DIV64		(3 << 10)
-#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
-#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
-
-#define	AT91_EMAC_SR		0x08	/* Status Register */
-#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
-#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
-#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
-
-#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
-
-#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
-#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
-#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
-
-#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
-#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
-#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
-#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
-#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
-#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
-#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
-
-#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
-
-#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
-#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
-#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
-#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
-
-#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
-#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
-#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
-#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
-#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
-#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
-#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
-#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
-#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
-#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
-#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
-#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
-
-#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
-#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
-#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
-
-#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
-#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
-#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
-#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
-#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
-#define			AT91_EMAC_RW_W		(1 << 28)
-#define			AT91_EMAC_RW_R		(2 << 28)
-#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
-#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
-#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
-#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
-#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
-#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
-#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
-#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
-#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
-#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
-#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
-#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
-#define AT91_EMAC_CDE		0x74	/* Code Error */
-#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
-#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
-#define AT91_EMAC_USF		0x80	/* Undersize Frame */
-#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h
deleted file mode 100644
index 24d012939cc4..000000000000
--- a/include/asm-arm/arch-at91/at91rm9200_mc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
-#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
-#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
-#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
-#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
-#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 4)
-#define			AT91_SDRAMC_DBW_16	(1 << 4)
-
-#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
-#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
-#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
-#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
deleted file mode 100644
index 889872a3f2a9..000000000000
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * Includes also definitions for AT91SAM9XE and AT91SAM9G families
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0	6	/* USART 0 */
-#define AT91SAM9260_ID_US1	7	/* USART 1 */
-#define AT91SAM9260_ID_US2	8	/* USART 2 */
-#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP	20	/* USB Host port */
-#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
-#define AT91SAM9260_ID_US3	23	/* USART 3 */
-#define AT91SAM9260_ID_US4	24	/* USART 4 */
-#define AT91SAM9260_ID_US5	25	/* USART 5 */
-#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0		0xfffa0000
-#define AT91SAM9260_BASE_TC0		0xfffa0000
-#define AT91SAM9260_BASE_TC1		0xfffa0040
-#define AT91SAM9260_BASE_TC2		0xfffa0080
-#define AT91SAM9260_BASE_UDP		0xfffa4000
-#define AT91SAM9260_BASE_MCI		0xfffa8000
-#define AT91SAM9260_BASE_TWI		0xfffac000
-#define AT91SAM9260_BASE_US0		0xfffb0000
-#define AT91SAM9260_BASE_US1		0xfffb4000
-#define AT91SAM9260_BASE_US2		0xfffb8000
-#define AT91SAM9260_BASE_SSC		0xfffbc000
-#define AT91SAM9260_BASE_ISI		0xfffc0000
-#define AT91SAM9260_BASE_EMAC		0xfffc4000
-#define AT91SAM9260_BASE_SPI0		0xfffc8000
-#define AT91SAM9260_BASE_SPI1		0xfffcc000
-#define AT91SAM9260_BASE_US3		0xfffd0000
-#define AT91SAM9260_BASE_US4		0xfffd4000
-#define AT91SAM9260_BASE_US5		0xfffd8000
-#define AT91SAM9260_BASE_TCB1		0xfffdc000
-#define AT91SAM9260_BASE_TC3		0xfffdc000
-#define AT91SAM9260_BASE_TC4		0xfffdc040
-#define AT91SAM9260_BASE_TC5		0xfffdc080
-#define AT91SAM9260_BASE_ADC		0xfffe0000
-#define AT91_BASE_SYS			0xffffe800
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9260_BASE_US0
-#define AT91_USART1	AT91SAM9260_BASE_US1
-#define AT91_USART2	AT91SAM9260_BASE_US2
-#define AT91_USART3	AT91SAM9260_BASE_US3
-#define AT91_USART4	AT91SAM9260_BASE_US4
-#define AT91_USART5	AT91SAM9260_BASE_US5
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
-
-#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
-
-#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
-#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-
-#define AT91SAM9G20_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9G20_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9G20_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
-#define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
deleted file mode 100644
index a8e9fec6c735..000000000000
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h
deleted file mode 100644
index c7c4778dac49..000000000000
--- a/include/asm-arm/arch-at91/at91sam9261.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0	6	/* USART 0 */
-#define AT91SAM9261_ID_US1	7	/* USART 1 */
-#define AT91SAM9261_ID_US2	8	/* USART 2 */
-#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP	20	/* USB Host port */
-#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
-#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0		0xfffa0000
-#define AT91SAM9261_BASE_TC0		0xfffa0000
-#define AT91SAM9261_BASE_TC1		0xfffa0040
-#define AT91SAM9261_BASE_TC2		0xfffa0080
-#define AT91SAM9261_BASE_UDP		0xfffa4000
-#define AT91SAM9261_BASE_MCI		0xfffa8000
-#define AT91SAM9261_BASE_TWI		0xfffac000
-#define AT91SAM9261_BASE_US0		0xfffb0000
-#define AT91SAM9261_BASE_US1		0xfffb4000
-#define AT91SAM9261_BASE_US2		0xfffb8000
-#define AT91SAM9261_BASE_SSC0		0xfffbc000
-#define AT91SAM9261_BASE_SSC1		0xfffc0000
-#define AT91SAM9261_BASE_SSC2		0xfffc4000
-#define AT91SAM9261_BASE_SPI0		0xfffc8000
-#define AT91SAM9261_BASE_SPI1		0xfffcc000
-#define AT91_BASE_SYS			0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9261_BASE_US0
-#define AT91_USART1	AT91SAM9261_BASE_US1
-#define AT91_USART2	AT91SAM9261_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
-
-#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
-#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h
deleted file mode 100644
index 6f072421be5b..000000000000
--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9261_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
-#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
-#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
deleted file mode 100644
index 018a647311da..000000000000
--- a/include/asm-arm/arch-at91/at91sam9263.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9263.h
- *
- * (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_H
-#define AT91SAM9263_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
-#define AT91SAM9263_ID_US0	7	/* USART 0 */
-#define AT91SAM9263_ID_US1	8	/* USART 1 */
-#define AT91SAM9263_ID_US2	9	/* USART 2 */
-#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
-#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
-#define AT91SAM9263_ID_CAN	12	/* CAN */
-#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
-#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
-#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
-#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
-#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
-#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
-#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
-#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
-#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
-#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
-#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
-#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
-#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
-#define AT91SAM9263_ID_UHP	29	/* USB Host port */
-#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9263_BASE_UDP		0xfff78000
-#define AT91SAM9263_BASE_TCB0		0xfff7c000
-#define AT91SAM9263_BASE_TC0		0xfff7c000
-#define AT91SAM9263_BASE_TC1		0xfff7c040
-#define AT91SAM9263_BASE_TC2		0xfff7c080
-#define AT91SAM9263_BASE_MCI0		0xfff80000
-#define AT91SAM9263_BASE_MCI1		0xfff84000
-#define AT91SAM9263_BASE_TWI		0xfff88000
-#define AT91SAM9263_BASE_US0		0xfff8c000
-#define AT91SAM9263_BASE_US1		0xfff90000
-#define AT91SAM9263_BASE_US2		0xfff94000
-#define AT91SAM9263_BASE_SSC0		0xfff98000
-#define AT91SAM9263_BASE_SSC1		0xfff9c000
-#define AT91SAM9263_BASE_AC97C		0xfffa0000
-#define AT91SAM9263_BASE_SPI0		0xfffa4000
-#define AT91SAM9263_BASE_SPI1		0xfffa8000
-#define AT91SAM9263_BASE_CAN		0xfffac000
-#define AT91SAM9263_BASE_PWMC		0xfffb8000
-#define AT91SAM9263_BASE_EMAC		0xfffbc000
-#define AT91SAM9263_BASE_ISI		0xfffc4000
-#define AT91SAM9263_BASE_2DGE		0xfffc8000
-#define AT91_BASE_SYS			0xffffe000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
-#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
-#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9263_BASE_US0
-#define AT91_USART1	AT91SAM9263_BASE_US1
-#define AT91_USART2	AT91SAM9263_BASE_US2
-
-#define AT91_SMC	AT91_SMC0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
-#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
-
-#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
-#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
-#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
-#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
deleted file mode 100644
index 72f6e668e414..000000000000
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9263_matrix.h
- *
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_MATRIX_H
-#define AT91SAM9263_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-
-#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h
deleted file mode 100644
index d3b8b3da6b4d..000000000000
--- a/include/asm-arm/arch-at91/at91sam9_sdramc.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9_sdramc.h
- *
- * SDRAM Controllers (SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SDRAMC_H
-#define AT91SAM9_SDRAMC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		0
-#define			AT91_SDRAMC_MODE_NOP		1
-#define			AT91_SDRAMC_MODE_PRECHARGE	2
-#define			AT91_SDRAMC_MODE_LMR		3
-#define			AT91_SDRAMC_MODE_REFRESH	4
-#define			AT91_SDRAMC_MODE_EXT_LMR	5
-#define			AT91_SDRAMC_MODE_DEEP		6
-
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
-#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_1	(1 << 5)
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define			AT91_SDRAMC_CAS_3	(3 << 5)
-#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 7)
-#define			AT91_SDRAMC_DBW_16	(1 << 7)
-#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
-#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_SDRAMC_LPCB_DISABLE		0
-#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
-#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
-#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
-#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
-#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_SDRAMC_MD_SDRAM		0
-#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h
deleted file mode 100644
index 9e49eed31e50..000000000000
--- a/include/asm-arm/arch-at91/at91sam9_smc.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9_smc.h
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
deleted file mode 100644
index 622e56f81d42..000000000000
--- a/include/asm-arm/arch-at91/at91sam9rl.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9260.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Common definitions.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_H
-#define AT91SAM9RL_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Controller */
-#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0	6	/* USART 0 */
-#define AT91SAM9RL_ID_US1	7	/* USART 1 */
-#define AT91SAM9RL_ID_US2	8	/* USART 2 */
-#define AT91SAM9RL_ID_US3	9	/* USART 3 */
-#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
-#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
-#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
-#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
-#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9RL_BASE_TCB0	0xfffa0000
-#define AT91SAM9RL_BASE_TC0	0xfffa0000
-#define AT91SAM9RL_BASE_TC1	0xfffa0040
-#define AT91SAM9RL_BASE_TC2	0xfffa0080
-#define AT91SAM9RL_BASE_MCI	0xfffa4000
-#define AT91SAM9RL_BASE_TWI0	0xfffa8000
-#define AT91SAM9RL_BASE_TWI1	0xfffac000
-#define AT91SAM9RL_BASE_US0	0xfffb0000
-#define AT91SAM9RL_BASE_US1	0xfffb4000
-#define AT91SAM9RL_BASE_US2	0xfffb8000
-#define AT91SAM9RL_BASE_US3	0xfffbc000
-#define AT91SAM9RL_BASE_SSC0	0xfffc0000
-#define AT91SAM9RL_BASE_SSC1	0xfffc4000
-#define AT91SAM9RL_BASE_PWMC	0xfffc8000
-#define AT91SAM9RL_BASE_SPI	0xfffcc000
-#define AT91SAM9RL_BASE_TSC	0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
-#define AT91SAM9RL_BASE_AC97C	0xfffd8000
-#define AT91_BASE_SYS		0xffffc000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT91SAM9RL_BASE_US0
-#define AT91_USART1	AT91SAM9RL_BASE_US1
-#define AT91_USART2	AT91SAM9RL_BASE_US2
-#define AT91_USART3	AT91SAM9RL_BASE_US3
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
-
-#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
deleted file mode 100644
index 84224174e6a1..000000000000
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam9rl_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_MATRIX_H
-#define AT91SAM9RL_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-
-#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91x40.h b/include/asm-arm/arch-at91/at91x40.h
deleted file mode 100644
index 612203e0177f..000000000000
--- a/include/asm-arm/arch-at91/at91x40.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91x40.h
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91X40_H
-#define AT91X40_H
-
-/*
- *	IRQ list.
- */
-#define AT91_ID_FIQ		0	/* FIQ */
-#define AT91_ID_SYS		1	/* System Peripheral */
-#define AT91X40_ID_USART0	2	/* USART port 0 */
-#define AT91X40_ID_USART1	3	/* USART port 1 */
-#define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
-#define AT91X40_ID_TC1		5	/* Timer/Counter 1*/
-#define AT91X40_ID_TC2		6	/* Timer/Counter 2*/
-#define AT91X40_ID_WD		7	/* Watchdog? */
-#define AT91X40_ID_PIOA		8	/* Parallel IO Controller A */
-
-#define AT91X40_ID_IRQ0		16	/* External IRQ 0 */
-#define AT91X40_ID_IRQ1		17	/* External IRQ 1 */
-#define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BASE_SYS	0xffc00000
-
-#define AT91_EBI	(0xffe00000 - AT91_BASE_SYS)	/* External Bus Interface */
-#define AT91_SF		(0xfff00000 - AT91_BASE_SYS)	/* Special Function */
-#define AT91_USART1	(0xfffcc000 - AT91_BASE_SYS)	/* USART 1 */
-#define AT91_USART0	(0xfffd0000 - AT91_BASE_SYS)	/* USART 0 */
-#define AT91_TC		(0xfffe0000 - AT91_BASE_SYS)	/* Timer Counter */
-#define AT91_PIOA	(0xffff0000 - AT91_BASE_SYS)	/* PIO Controller A */
-#define AT91_PS		(0xffff4000 - AT91_BASE_SYS)	/* Power Save */
-#define AT91_WD		(0xffff8000 - AT91_BASE_SYS)	/* Watchdog Timer */
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
-
-/*
- * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
- * But it does have a chip identify register and extension ID, so define at
- * least these here.
- */
-#define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
-#define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
-
-#endif /* AT91X40_H */
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
deleted file mode 100644
index 94de788da76e..000000000000
--- a/include/asm-arm/arch-at91/board.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * include/asm-arm/arch-at91/board.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers.  For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-
- /* USB Device */
-struct at91_udc_data {
-	u8	vbus_pin;		/* high == host powering us */
-	u8	pullup_pin;		/* active == D+ pulled up */
-	u8	pullup_active_low;	/* true == pullup_pin is active low */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
-	u8	irq_pin;		/* I/O IRQ */
-	u8	det_pin;		/* Card detect */
-	u8	vcc_pin;		/* power switching */
-	u8	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
-	u8		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	u8		wp_pin;		/* (SD) writeprotect detect */
-	u8		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
-	u32		phy_mask;
-	u8		phy_irq_pin;	/* PHY IRQ */
-	u8		is_rmii;	/* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
-#define eth_platform_data	at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-	u8		vbus_pin[];	/* port power-control pin */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct at91_nand_data {
-	u8		enable_pin;	/* chip enable */
-	u8		det_pin;	/* card detect */
-	u8		rdy_pin;	/* ready/busy */
-	u8		ale;		/* address line number connected to ALE */
-	u8		cle;		/* address line number connected to CLE */
-	u8		bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct at91_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS	0x01
-#define ATMEL_UART_RTS	0x02
-#define ATMEL_UART_DSR	0x04
-#define ATMEL_UART_DTR	0x08
-#define ATMEL_UART_DCD	0x10
-#define ATMEL_UART_RI	0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
-
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
-/*
- * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
- * platform devices.  Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK	0x01
-#define ATMEL_SSC_TF	0x02
-#define ATMEL_SSC_TD	0x04
-#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK	0x10
-#define ATMEL_SSC_RF	0x20
-#define ATMEL_SSC_RD	0x40
-#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-
- /* AC97 */
-struct atmel_ac97_data {
-	u8		reset_pin;	/* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-
- /* ISI */
-extern void __init at91_add_device_isi(void);
-
- /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
-#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
deleted file mode 100644
index 52df794205cb..000000000000
--- a/include/asm-arm/arch-at91/cpu.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * include/asm-arm/arch-at91/cpu.h
- *
- *  Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200	0x09290780
-#define ARCH_ID_AT91SAM9260	0x019803a0
-#define ARCH_ID_AT91SAM9261	0x019703a0
-#define ARCH_ID_AT91SAM9263	0x019607a0
-#define ARCH_ID_AT91SAM9G20	0x019905a0
-#define ARCH_ID_AT91SAM9RL64	0x019b03a0
-#define ARCH_ID_AT91CAP9	0x039A03A0
-
-#define ARCH_ID_AT91SAM9XE128	0x329973a0
-#define ARCH_ID_AT91SAM9XE256	0x329a93a0
-#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
-
-#define ARCH_ID_AT91M40800	0x14080044
-#define ARCH_ID_AT91R40807	0x44080746
-#define ARCH_ID_AT91M40807	0x14080745
-#define ARCH_ID_AT91R40008	0x44000840
-
-static inline unsigned long at91_cpu_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#define ARCH_FAMILY_AT91X92	0x09200000
-#define ARCH_FAMILY_AT91SAM9	0x01900000
-#define ARCH_FAMILY_AT91SAM9XE	0x02900000
-
-static inline unsigned long at91_arch_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
-#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
-#else
-#define cpu_is_at91sam9xe()	(0)
-#define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
-#else
-#define cpu_is_at91sam9g20()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
-#else
-#define cpu_is_at91sam9263()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9RL
-#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
-#else
-#define cpu_is_at91sam9rl()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
-#else
-#define cpu_is_at91cap9()	(0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000()	(0)
-
-#endif
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
deleted file mode 100644
index 13e9f5e1d4ff..000000000000
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/debug-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1						@ MMU enabled?
-	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
-	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
-	.endm
-
-	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
-	beq	1001b
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
-	beq	1001b
-	.endm
-
diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h
deleted file mode 100644
index 774565412beb..000000000000
--- a/include/asm-arm/arch-at91/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-at91/dma.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
deleted file mode 100644
index 1005eee6219b..000000000000
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91/entry-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
-	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
-	.endm
-
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
deleted file mode 100644
index 0a241e2fb672..000000000000
--- a/include/asm-arm/arch-at91/gpio.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * include/asm-arm/arch-at91/gpio.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <asm/irq.h>
-
-#define PIN_BASE		NR_AIC_IRQS
-
-#define MAX_GPIO_BANKS		5
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
-#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
-#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
-#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
-#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
-#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
-#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
-#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
-#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
-#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
-#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
-#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
-#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
-#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
-#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
-#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
-#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
-#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
-#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
-#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
-#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
-#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
-#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
-#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
-#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
-#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
-
-#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
-#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
-#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
-#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
-#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
-#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
-#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
-#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
-#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
-#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
-#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
-#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
-#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
-#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
-#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
-#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
-#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
-#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
-#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
-#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
-#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
-#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
-#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
-#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
-#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
-#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
-
-#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
-#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
-#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
-#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
-#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
-#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
-#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
-#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
-#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
-#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
-#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
-#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
-#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
-#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
-#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
-#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
-#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
-#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
-#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
-#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
-#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
-#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
-#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
-#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
-#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
-#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
-
-#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
-#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
-#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
-#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
-#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
-#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
-#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
-#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
-#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
-#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
-#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
-#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
-#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
-#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
-#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
-#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
-#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
-#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
-#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
-#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
-#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
-#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
-#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
-#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
-#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
-#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
-
-#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
-#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
-#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
-#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
-#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
-#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
-#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
-#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
-#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
-#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
-#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
-#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
-#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
-#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
-#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
-#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
-#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
-#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
-#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
-#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
-#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
-#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
-#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
-#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
-#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
-#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
-#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
-#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
-#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
-#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
-#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
-#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-/*-------------------------------------------------------------------------*/
-
-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
- * eventually be removed (along with this errno.h inclusion), and the
- * gpio request/free calls should probably be implemented.
- */
-
-#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	at91_set_gpio_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-#endif	/* __ASSEMBLY__ */
-
-#endif
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
deleted file mode 100644
index 016a3a3f6633..000000000000
--- a/include/asm-arm/arch-at91/hardware.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-at91/hardware.h
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#include <asm/arch/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-#include <asm/arch/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-#include <asm/arch/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <asm/arch/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000.  (544Kb)
- */
-#define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
-#endif
-
-#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX		SZ_1M
-#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0	0x10000000
-#define AT91_CHIPSELECT_1	0x20000000
-#define AT91_CHIPSELECT_2	0x30000000
-#define AT91_CHIPSELECT_3	0x40000000
-#define AT91_CHIPSELECT_4	0x50000000
-#define AT91_CHIPSELECT_5	0x60000000
-#define AT91_CHIPSELECT_6	0x70000000
-#define AT91_CHIPSELECT_7	0x80000000
-
-/* SDRAM */
-#ifdef CONFIG_DRAM_BASE
-#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
-#else
-#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
-#endif
-
-/* Clocks */
-#define AT91_SLOW_CLOCK		32768		/* slow clock */
-
-
-#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
deleted file mode 100644
index f8beaa228467..000000000000
--- a/include/asm-arm/arch-at91/io.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	__raw_writel(value, addr + reg_offset);
-}
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
deleted file mode 100644
index 70b1216dce5d..000000000000
--- a/include/asm-arm/arch-at91/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-at91/irqs.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/io.h>
-#include <asm/arch/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- *   (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 5 banks of GPIO.
- */
-#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
-
-/* FIQ is AIC source 0. */
-#define FIQ_START AT91_ID_FIQ
-
-#endif
diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h
deleted file mode 100644
index 4835d6784509..000000000000
--- a/include/asm-arm/arch-at91/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91/memory.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-#define PHYS_OFFSET	(AT91_SDRAM_BASE)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h
deleted file mode 100644
index 6bf846098ea9..000000000000
--- a/include/asm-arm/arch-at91/system.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
-	 */
-	cpu_do_idle();
-}
-
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
-#endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
deleted file mode 100644
index 298d8313cdac..000000000000
--- a/include/asm-arm/arch-at91/timex.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * include/asm-arm/arch-at91/timex.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <asm/hardware.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-
-#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-
-#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-#define AT91SAM9_MASTER_CLOCK	90000000
-#else
-#define AT91SAM9_MASTER_CLOCK	99300000
-#endif
-
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK	99300000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-
-#if defined(CONFIG_MACH_USB_A9263)
-#define AT91SAM9_MASTER_CLOCK	90000000
-#else
-#define AT91SAM9_MASTER_CLOCK	99959500
-#endif
-
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-
-#define AT91SAM9_MASTER_CLOCK	100000000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G20)
-
-#define AT91SAM9_MASTER_CLOCK	132096000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-
-#define AT91CAP9_MASTER_CLOCK	100000000
-#define CLOCK_TICK_RATE		(AT91CAP9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91X40)
-
-#define AT91X40_MASTER_CLOCK	40000000
-#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
deleted file mode 100644
index f5636a8f6132..000000000000
--- a/include/asm-arm/arch-at91/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-at91/uncompress.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <linux/atmel_serial.h>
-
-#if defined(CONFIG_AT91_EARLY_DBGU)
-#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
-#endif
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
-		barrier();
-	__raw_writel(c, sys + ATMEL_US_THR);
-#endif
-}
-
-static inline void flush(void)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
-		barrier();
-#endif
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h
deleted file mode 100644
index bb05e70e932a..000000000000
--- a/include/asm-arm/arch-at91/vmalloc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/include/asm-arm/arch-cl7500/acornfb.h
deleted file mode 100644
index aea6330c9745..000000000000
--- a/include/asm-arm/arch-cl7500/acornfb.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119)
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
-			  struct fb_var_screeninfo *var)
-{
-	u_int bandwidth;
-  
-	vidc->control |= VIDC20_CTRL_PIX_CK;
-
-	/* Calculate bandwidth */
-	bandwidth = var->pixclock * 8 / var->bits_per_pixel;
-
-	/* Encode bandwidth as VIDC20 setting */
-	if (bandwidth > 16667*2)
-		vidc->control |= VIDC20_CTRL_FIFO_16;
-	else if (bandwidth > 13333*2)
-		vidc->control |= VIDC20_CTRL_FIFO_20;
-	else if (bandwidth > 11111*2)
-		vidc->control |= VIDC20_CTRL_FIFO_24;
-	else
-		vidc->control |= VIDC20_CTRL_FIFO_28;
-
-	vidc->pll_ctl  = 0x2020;
-}
-
-#ifdef CONFIG_CHRONTEL_7003
-#define acornfb_default_control()	VIDC20_CTRL_PIX_HCLK
-#else
-#define acornfb_default_control()	VIDC20_CTRL_PIX_VCLK
-#endif
-
-#define acornfb_default_econtrol()	VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S
deleted file mode 100644
index 9a2b67d24098..000000000000
--- a/include/asm-arm/arch-cl7500/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-cl7500/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h
deleted file mode 100644
index 591ed2551892..000000000000
--- a/include/asm-arm/arch-cl7500/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/dma.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#define DMA_S0			0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
deleted file mode 100644
index 038b761fdadc..000000000000
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/include/asm-arm/arch-cl7500/hardware.h b/include/asm-arm/arch-cl7500/hardware.h
deleted file mode 100644
index 1adfd18e6154..000000000000
--- a/include/asm-arm/arch-cl7500/hardware.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/hardware.h
- *
- * Copyright (C) 1996-1999 Russell King.
- * Copyright (C) 1999 Nexus Electronics Ltd.
- *
- * This file contains the hardware definitions of the 
- * CL7500 evaluation board.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-#include <asm/hardware/iomd.h>
-
-#ifdef __ASSEMBLY__
-#define IOMEM(x) x
-#else
-#define IOMEM(x) ((void __iomem *)(x))
-#endif
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define ISA_START		0x0c000000	/* ISA */
-#define ISA_SIZE		0x00010000
-#define ISA_BASE		0xe1000000
-
-#define FLASH_START		0x01000000	/* XXX */
-#define FLASH_SIZE		0x01000000
-#define FLASH_BASE		0xe2000000
-
-#define LED_START		0x0302B000
-#define LED_SIZE		0x00001000
-#define LED_BASE		0xe3000000
-#define LED_ADDRESS		(LED_BASE + 0xa00)
-
-/* Let's define SCREEN_START for CL7500, even though it's a lie. */
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define VIDC_BASE		(void __iomem *)0xe0400000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-/* in/out bias for the ISA slot region */
-#define ISASLOT_IO		0x80400000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
deleted file mode 100644
index 89a33287f4fe..000000000000
--- a/include/asm-arm/arch-cl7500/io.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int v, r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (v)			\
-		: "r" (r), "Ir" (o));		\
-	v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (r), "Ir" (o));	\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port << 2));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port << 2));			\
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)								\
-	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)			__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/irq.h b/include/asm-arm/arch-cl7500/irq.h
deleted file mode 100644
index 4b286331f3f8..000000000000
--- a/include/asm-arm/arch-cl7500/irq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-cl7500/irq.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
- *
- * Changelog:
- *   10-10-1996	RMK	Brought up to date with arch-sa110eval
- *   22-08-1998	RMK	Restructured IRQ routines
- *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
- */
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline int fixup_irq(unsigned int irq)
-{
-	if (irq == IRQ_ISA) {
-		int isabits = *((volatile unsigned int *)0xe002b700);
-		if (isabits == 0) {
-			printk("Spurious ISA IRQ!\n");
-			return irq;
-		}
-		irq = IRQ_ISA_BASE;
-		while (!(isabits & 1)) {
-			irq++;
-			isabits >>= 1;
-		}
-	}
-
-	return irq;
-}
diff --git a/include/asm-arm/arch-cl7500/irqs.h b/include/asm-arm/arch-cl7500/irqs.h
deleted file mode 100644
index f20996eadf19..000000000000
--- a/include/asm-arm/arch-cl7500/irqs.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/irqs.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-#define IRQ_INT2		0
-#define IRQ_INT1		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_FORCE		7
-#define IRQ_INT8		8
-#define IRQ_ISA			9
-#define IRQ_INT6		10
-#define IRQ_INT5		11
-#define IRQ_INT4		12
-#define IRQ_INT3		13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define IRQ_IOP0		24
-#define IRQ_IOP1		25
-#define IRQ_IOP2		26
-#define IRQ_IOP3		27
-#define IRQ_IOP4		28
-#define IRQ_IOP5		29
-#define IRQ_IOP6		30
-#define IRQ_IOP7		31
-
-#define IRQ_MOUSERX		40
-#define IRQ_MOUSETX		41
-#define IRQ_ADC			42
-#define IRQ_EVENT1		43
-#define IRQ_EVENT2		44
-
-#define IRQ_ISA_BASE		48
-#define IRQ_ISA_3		48
-#define IRQ_ISA_4		49
-#define IRQ_ISA_5		50
-#define IRQ_ISA_7		51
-#define IRQ_ISA_9		52
-#define IRQ_ISA_10		53
-#define IRQ_ISA_11		54
-#define IRQ_ISA_14		55	
-
-#define FIQ_INT9		0
-#define FIQ_INT5		1
-#define FIQ_INT6		4
-#define FIQ_INT8		6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h
deleted file mode 100644
index 3178140e24ca..000000000000
--- a/include/asm-arm/arch-cl7500/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/memory.h
- *
- * Copyright (c) 1996,1997,1998 Russell King.
- *
- * Changelog:
- *  20-Oct-1996	RMK	Created
- *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
- *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
- *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
- *  21-Mar-1999	RMK	Renamed to memory.h
- *		RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/system.h b/include/asm-arm/arch-cl7500/system.h
deleted file mode 100644
index a9505d6a74d7..000000000000
--- a/include/asm-arm/arch-cl7500/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/system.h
- *
- * Copyright (c) 1999 Nexus Electronics Ltd.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	iomd_writeb(0, IOMD_SUSMODE);
-}
-
-#define arch_reset(mode)			\
-	do {					\
-		iomd_writeb(0, IOMD_ROMCR0);	\
-		cpu_reset(0);			\
-	} while (0)
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/timex.h b/include/asm-arm/arch-cl7500/timex.h
deleted file mode 100644
index 8a4175fc0106..000000000000
--- a/include/asm-arm/arch-cl7500/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/timex.h
- *
- * CL7500 architecture timex specifications
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
-
-/*
- * On the ARM7500, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h
deleted file mode 100644
index c437e0c88c3f..000000000000
--- a/include/asm-arm/arch-cl7500/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/uncompress.h
- *
- * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
- */
-#define BASE 0x03010000
-#define SERBASE (BASE + (0x2f8 << 2))
-
-static inline void putc(char c)
-{
-	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
-		barrier();
-
-	*((volatile unsigned int *)(SERBASE)) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	int baud = 3686400 / (9600 * 32);
-
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
-	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
-	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
-	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
-	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/include/asm-arm/arch-cl7500/vmalloc.h
deleted file mode 100644
index ba8d7a84456a..000000000000
--- a/include/asm-arm/arch-cl7500/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/include/asm-arm/arch-clps711x/autcpu12.h
deleted file mode 100644
index 1588a365f610..000000000000
--- a/include/asm-arm/arch-clps711x/autcpu12.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * AUTCPU12 specific defines
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_AUTCPU12_H
-#define __ASM_ARCH_AUTCPU12_H
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2
- * (nCS2). This is the mapping for it.
- */
-#define AUTCPU12_PHYS_CS8900A		CS2_PHYS_BASE		/* physical */
-#define AUTCPU12_VIRT_CS8900A		(0xfe000000)		/* virtual */
-
-/*
- * The flash bank is wired to chip select 0
- */
-#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
-
-/* offset for device specific information structure */
-#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
-/*
-* Videomemory is the internal SRAM (CS 6)	
-*/
-#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
-#define AUTCPU12_VIRT_VIDEO		(0xfd000000)
-
-/*
-* All special IO's are tied to CS1
-*/
-#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
-
-#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
-
-#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
-
-#define AUTCPU12_PHYS_SMC              	CS1_PHYS_BASE +0x06000000  /* physical */
-
-#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
-
-#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
-
-#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
-
-#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
-
-/* 
-* defines for smartmedia card access 
-*/
-#define AUTCPU12_SMC_RDY		(1<<2)
-#define AUTCPU12_SMC_ALE		(1<<3)
-#define AUTCPU12_SMC_CLE  		(1<<4)
-#define AUTCPU12_SMC_PORT_OFFSET	PBDR
-#define AUTCPU12_SMC_SELECT_OFFSET 	0x10
-/*
-* defines for lcd contrast 
-*/
-#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
-#define	AUTCPU12_DPOT_CS		(1<<0)
-#define AUTCPU12_DPOT_CLK    		(1<<1)
-#define	AUTCPU12_DPOT_UD		(1<<2)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/include/asm-arm/arch-clps711x/debug-macro.S
deleted file mode 100644
index bc0a5760722b..000000000000
--- a/include/asm-arm/arch-clps711x/debug-macro.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/include/asm-arm/arch-clps711x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/clps7111.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #CLPS7111_PHYS_BASE
-		movne	\rx, #CLPS7111_VIRT_BASE
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
-		add	\rx, \rx, #0x0000	@ UART1
-#else
-		add	\rx, \rx, #0x1000	@ UART2
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0480]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-		tst	\rx, #0x1000		@ UART2 does not have CTS here
-		bne	1002f
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 8		@ CTS
-		bne	1001b
-1002:
-		.endm
-
diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h
deleted file mode 100644
index 610997938423..000000000000
--- a/include/asm-arm/arch-clps711x/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S
deleted file mode 100644
index cd8c5a0bc7bc..000000000000
--- a/include/asm-arm/arch-clps711x/entry-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-clps711x/entry-macro.S
- *
- * Low-level IRQ helper macros for CLPS711X-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
-#error INTSR stride != INTMR stride
-#endif
-
-		.macro	get_irqnr_and_base, irqnr, stat, base, mask
-		mov	\base, #CLPS7111_BASE
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #4
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-		movs	\stat, \stat, lsr #4
-		bne	1001f
-
-		add	\base, \base, #INTSR2 - INTSR1
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #16
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-
-1001:		tst	\stat, #255
-		addeq	\irqnr, \irqnr, #8
-		moveq	\stat, \stat, lsr #8
-		tst	\stat, #15
-		addeq	\irqnr, \irqnr, #4
-		moveq	\stat, \stat, lsr #4
-		tst	\stat, #3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\stat, \stat, lsr #2
-		tst	\stat, #1
-		addeq	\irqnr, \irqnr, #1
-		moveq	\stat, \stat, lsr #1
-		tst	\stat, #1			@ bit 0 should be set
-		.endm
-
-
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
deleted file mode 100644
index 0fdbe72fff2a..000000000000
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/hardware.h
- *
- *  This file contains the hardware definitions of the Prospector P720T.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define CLPS7111_VIRT_BASE	0xff000000
-#define CLPS7111_BASE		CLPS7111_VIRT_BASE
-
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
-#define CS0_PHYS_BASE		(0x00000000)
-#define CS1_PHYS_BASE		(0x10000000)
-#define CS2_PHYS_BASE		(0x20000000)
-#define CS3_PHYS_BASE		(0x30000000)
-#define CS4_PHYS_BASE		(0x40000000)
-#define CS5_PHYS_BASE		(0x50000000)
-#define CS6_PHYS_BASE		(0x60000000)
-#define CS7_PHYS_BASE		(0x70000000)
-#else
-#define CS0_PHYS_BASE		(0x70000000)
-#define CS1_PHYS_BASE		(0x60000000)
-#define CS2_PHYS_BASE		(0x50000000)
-#define CS3_PHYS_BASE		(0x40000000)
-#define CS4_PHYS_BASE		(0x30000000)
-#define CS5_PHYS_BASE		(0x20000000)
-#define CS6_PHYS_BASE		(0x10000000)
-#define CS7_PHYS_BASE		(0x00000000)
-#endif
-
-#if defined (CONFIG_ARCH_EP7211)
-
-#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7211_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7212_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7212.h>
-
-#endif
-
-#define SYSPLD_VIRT_BASE	0xfe000000
-#define SYSPLD_BASE		SYSPLD_VIRT_BASE
-
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE		IO_BASE
-
-#endif
-
-
-#if  defined (CONFIG_ARCH_AUTCPU12)
-
-#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CS89712_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
-#if defined (CONFIG_ARCH_CDB89712)
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-/* dynamic ioremap() areas */
-#define FLASH_START      0x00000000
-#define FLASH_SIZE       0x800000
-#define FLASH_WIDTH      4
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-
-/* static cdb89712_map_io() areas */
-#define REGISTER_START   0x80000000
-#define REGISTER_SIZE    0x4000
-#define REGISTER_BASE    0xff000000
-
-#define ETHER_START      0x20000000
-#define ETHER_SIZE       0x1000
-#define ETHER_BASE       0xfe000000
-
-#endif
-
-
-#if defined (CONFIG_ARCH_EDB7211)
-
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
-#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
-#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the EDB7211.
- */
-#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
-#define EDB_PD2_LCDEN		(1<<2)
-#define EDB_PD3_LCDBL		(1<<3)
-
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CEIVA_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-#define SRAM_START       0x60000000
-#define SRAM_SIZE        0xc000
-#define SRAM_WIDTH       4
-
-#define BOOTROM_START    0x70000000
-#define BOOTROM_SIZE     0x80
-#define BOOTROM_WIDTH    4
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
deleted file mode 100644
index 53d790202c19..000000000000
--- a/include/asm-arm/arch-clps711x/io.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-/*
- * We don't support ins[lb]/outs[lb].  Make them fault.
- */
-#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
-#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/irqs.h b/include/asm-arm/arch-clps711x/irqs.h
deleted file mode 100644
index 76025dc87637..000000000000
--- a/include/asm-arm/arch-clps711x/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/irqs.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupts from INTSR1
- */
-#define IRQ_CSINT			4
-#define IRQ_EINT1			5
-#define IRQ_EINT2			6
-#define IRQ_EINT3			7
-#define IRQ_TC1OI			8
-#define IRQ_TC2OI			9
-#define IRQ_RTCMI			10
-#define IRQ_TINT			11
-#define IRQ_UTXINT1			12
-#define IRQ_URXINT1			13
-#define IRQ_UMSINT			14
-#define IRQ_SSEOTI			15
-
-#define INT1_IRQS			(0x0000fff0)
-#define INT1_ACK_IRQS			(0x00004f10)
-
-/*
- * Interrupts from INTSR2
- */
-#define IRQ_KBDINT			(16+0)	/* bit 0 */
-#define IRQ_SS2RX			(16+1)	/* bit 1 */
-#define IRQ_SS2TX			(16+2)	/* bit 2 */
-#define IRQ_UTXINT2			(16+12)	/* bit 12 */
-#define IRQ_URXINT2			(16+13)	/* bit 13 */
-
-#define INT2_IRQS			(0x30070000)
-#define INT2_ACK_IRQS			(0x00010000)
-
-#define NR_IRQS                         30
-
diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h
deleted file mode 100644
index 42768cc8bfb4..000000000000
--- a/include/asm-arm/arch-clps711x/memory.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-
-#if defined(CONFIG_ARCH_CDB89712)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#elif defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-#else
-
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
-
-
-/*
- * Like the SA1100, the EDB7211 has a large gap between physical RAM
- * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
- * discontiguous physical memory.  In 2.4, we can use the standard
- * Linux NUMA support.
- *
- * This is not necessary for EP7211 implementations with only one used
- * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
- */
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1).  However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS	24
-
-#endif
-
diff --git a/include/asm-arm/arch-clps711x/syspld.h b/include/asm-arm/arch-clps711x/syspld.h
deleted file mode 100644
index 960578a22a8e..000000000000
--- a/include/asm-arm/arch-clps711x/syspld.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/syspld.h
- *
- *  System Control PLD register definitions.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSPLD_H
-#define __ASM_ARCH_SYSPLD_H
-
-#define SYSPLD_PHYS_BASE	(0x10000000)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
-#else
-#define SYSPLD_REG(type,off)	(off)
-#endif
-
-#define PLD_INT		SYSPLD_REG(u32, 0x000000)
-#define PLD_INT_PENIRQ		(1 << 5)
-#define PLD_INT_UCB_IRQ		(1 << 1)
-#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
-
-#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
-#define PLD_PWR_EXT		(1 << 5)
-#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
-#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
-#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
-#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
-
-#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
-#define PLD_KBD_WAKE		(1 << 1)
-#define PLD_KBD_EN		(1 << 0)
-
-#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
-#define PLD_SPI_EN		(1 << 0)
-
-#define PLD_IO		SYSPLD_REG(u32, 0x000010)
-#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
-#define PLD_IO_USER		(1 << 5)	/* user defined switch */
-#define PLD_IO_LED3		(1 << 4)
-#define PLD_IO_LED2		(1 << 3)
-#define PLD_IO_LED1		(1 << 2)
-#define PLD_IO_LED0		(1 << 1)
-#define PLD_IO_LEDEN		(1 << 0)
-
-#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
-#define PLD_IRDA_EN		(1 << 0)
-
-#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
-#define PLD_COM2_EN		(1 << 0)
-
-#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
-#define PLD_COM1_EN		(1 << 0)
-
-#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
-#define PLD_AUD_DIV1		(1 << 6)
-#define PLD_AUD_DIV0		(1 << 5)
-#define PLD_AUD_CLK_SEL1	(1 << 4)
-#define PLD_AUD_CLK_SEL0	(1 << 3)
-#define PLD_AUD_MIC_PWR		(1 << 2)
-#define PLD_AUD_MIC_GAIN	(1 << 1)
-#define PLD_AUD_CODEC_EN	(1 << 0)
-
-#define PLD_CF		SYSPLD_REG(u32, 0x000024)
-#define PLD_CF2_SLEEP		(1 << 5)
-#define PLD_CF1_SLEEP		(1 << 4)
-#define PLD_CF2_nPDREQ		(1 << 3)
-#define PLD_CF1_nPDREQ		(1 << 2)
-#define PLD_CF2_nIRQ		(1 << 1)
-#define PLD_CF1_nIRQ		(1 << 0)
-
-#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
-#define PLD_SDC_INT_EN		(1 << 2)
-#define PLD_SDC_WP		(1 << 1)
-#define PLD_SDC_CD		(1 << 0)
-
-#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
-
-#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
-#define PLD_CODEC_IRQ3		(1 << 4)
-#define PLD_CODEC_IRQ2		(1 << 3)
-#define PLD_CODEC_IRQ1		(1 << 2)
-#define PLD_CODEC_EN		(1 << 0)
-
-#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
-#define PLD_BRITE_UP		(1 << 1)
-#define PLD_BRITE_DN		(1 << 0)
-
-#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
-#define PLD_LCDEN_EN		(1 << 0)
-
-#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
-
-#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
-#define PLD_TCH_PENIRQ		(1 << 1)
-#define PLD_TCH_EN		(1 << 0)
-
-#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
-#define PLD_GPIO2		(1 << 2)
-#define PLD_GPIO1		(1 << 1)
-#define PLD_GPIO0		(1 << 0)
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h
deleted file mode 100644
index 11e1491535a8..000000000000
--- a/include/asm-arm/arch-clps711x/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/system.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov	r0, r0\n\
-	mov	r0, r0");
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-clps711x/time.h b/include/asm-arm/arch-clps711x/time.h
deleted file mode 100644
index 5edaae1c61d3..000000000000
--- a/include/asm-arm/arch-clps711x/time.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/time.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-extern void clps711x_setup_timer(void);
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_leds();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	clps711x_setup_timer();
-	timer_irq.handler = p720t_timer_interrupt;
-	setup_irq(IRQ_TC2OI, &timer_irq);
-}
diff --git a/include/asm-arm/arch-clps711x/timex.h b/include/asm-arm/arch-clps711x/timex.h
deleted file mode 100644
index dcbb381da3dd..000000000000
--- a/include/asm-arm/arch-clps711x/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/timex.h
- *
- *  Prospector 720T architecture timex specifications
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 512000
diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h
deleted file mode 100644
index 03d233ae87ce..000000000000
--- a/include/asm-arm/arch-clps711x/uncompress.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/uncompress.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p)		(*(unsigned long *)(p))
-#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx	SYSFLG2
-#define UARTDRx	UARTDR2
-#else
-#define SYSFLGx	SYSFLG1
-#define UARTDRx	UARTDR1
-#endif
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
-		barrier();
-	clps_writel(c, UARTDRx);
-}
-
-static inline void flush(void)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/include/asm-arm/arch-clps711x/vmalloc.h
deleted file mode 100644
index a5dfe96abc96..000000000000
--- a/include/asm-arm/arch-clps711x/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-clps711x/vmalloc.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-davinci/clock.h b/include/asm-arm/arch-davinci/clock.h
deleted file mode 100644
index cc168b7a14f2..000000000000
--- a/include/asm-arm/arch-davinci/clock.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-davinci/clock.h
- *
- * Clock control driver for DaVinci - header file
- *
- * Authors: Vladimir Barinov <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
-#define __ASM_ARCH_DAVINCI_CLOCK_H
-
-struct clk;
-
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
-
-#endif
diff --git a/include/asm-arm/arch-davinci/common.h b/include/asm-arm/arch-davinci/common.h
deleted file mode 100644
index a97dfbb15e57..000000000000
--- a/include/asm-arm/arch-davinci/common.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Header for code common to all DaVinci machines.
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
-#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
-
-struct sys_timer;
-
-extern struct sys_timer davinci_timer;
-
-#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/include/asm-arm/arch-davinci/debug-macro.S
deleted file mode 100644
index e6c0f0d5d062..000000000000
--- a/include/asm-arm/arch-davinci/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Debugging macro for DaVinci
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-		.macro addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x01000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00c20000   @ UART 0
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-davinci/dma.h b/include/asm-arm/arch-davinci/dma.h
deleted file mode 100644
index 8e2f2d0ba667..000000000000
--- a/include/asm-arm/arch-davinci/dma.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * DaVinci DMA definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_ADDRESS			0xffffffff
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S
deleted file mode 100644
index 3ebfcc5cb58e..000000000000
--- a/include/asm-arm/arch-davinci/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Low-level IRQ helper macros for TI DaVinci-based platforms
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr \tmp, [\base, #0x14]
-		mov \tmp, \tmp, lsr #2
-		sub \irqnr, \tmp, #1
-		cmp \tmp, #0
-		.endm
-
-		.macro	irq_prio_table
-		.endm
diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h
deleted file mode 100644
index ff8de30b2fb3..000000000000
--- a/include/asm-arm/arch-davinci/gpio.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <asm/hardware.h>
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
- * for later updates, code should write GPIO(N) or:
- *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
-#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
-#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
-
-struct gpio_controller {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct gpio_controller *__iomem
-__gpio_to_controller(unsigned gpio)
-{
-	void *__iomem ptr;
-
-	if (gpio < 32)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
-	else if (gpio < 64)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
-	else if (gpio < DAVINCI_N_GPIO)
-		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
-	else
-		ptr = NULL;
-	return ptr;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-/* The get/set/clear functions will inline when called with constant
- * parameters, for low-overhead bitbanging.  Illegal constant parameters
- * cause link-time errors.
- *
- * Otherwise, calls with variable parameters use outlined functions.
- */
-extern int __error_inval_gpio(void);
-
-extern void __gpio_set(unsigned gpio, int value);
-extern int __gpio_get(unsigned gpio);
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value)) {
-		struct gpio_controller	*__iomem g;
-		u32			mask;
-
-		if (gpio >= DAVINCI_N_GPIO)
-			__error_inval_gpio();
-
-		g = __gpio_to_controller(gpio);
-		mask = __gpio_mask(gpio);
-		if (value)
-			__raw_writel(mask, &g->set_data);
-		else
-			__raw_writel(mask, &g->clr_data);
-		return;
-	}
-
-	__gpio_set(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs.
- *
- * NOTE: changes in reported values are synchronized to the GPIO clock.
- * This is most easily seen after calling gpio_set_value() and then immediatly
- * gpio_get_value(), where the gpio_get_value() would return the old value
- * until the GPIO clock ticks and the new value gets latched.
- */
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct gpio_controller *__iomem g;
-
-	if (!__builtin_constant_p(gpio))
-		return __gpio_get(gpio);
-
-	if (gpio >= DAVINCI_N_GPIO)
-		return __error_inval_gpio();
-
-	g = __gpio_to_controller(gpio);
-	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
-}
-
-/* powerup default direction is IN */
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-#include <asm-generic/gpio.h>	/* cansleep wrappers */
-
-extern int gpio_request(unsigned gpio, const char *tag);
-extern void gpio_free(unsigned gpio);
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return DAVINCI_N_AINTC_IRQ + gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - DAVINCI_N_AINTC_IRQ;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
deleted file mode 100644
index a2e8969afaca..000000000000
--- a/include/asm-arm/arch-davinci/hardware.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Common hardware definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Base register addresses
- */
-#define DAVINCI_DMA_3PCC_BASE			(0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE			(0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE			(0x01C10400)
-#define DAVINCI_I2C_BASE			(0x01C21000)
-#define DAVINCI_PWM0_BASE			(0x01C22000)
-#define DAVINCI_PWM1_BASE			(0x01C22400)
-#define DAVINCI_PWM2_BASE			(0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE		(0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE			(0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE			(0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE		(0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE			(0x01C42000)
-#define DAVINCI_IEEE1394_BASE			(0x01C60000)
-#define DAVINCI_USB_OTG_BASE			(0x01C64000)
-#define DAVINCI_CFC_ATA_BASE			(0x01C66000)
-#define DAVINCI_SPI_BASE			(0x01C66800)
-#define DAVINCI_GPIO_BASE			(0x01C67000)
-#define DAVINCI_UHPI_BASE			(0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE			(0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE		(0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE	(0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE		(0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE		(0x01C84000)
-#define DAVINCI_IMCOP_BASE			(0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE		(0x01E00000)
-#define DAVINCI_VLYNQ_BASE			(0x01E01000)
-#define DAVINCI_MCBSP_BASE			(0x01E02000)
-#define DAVINCI_MMC_SD_BASE			(0x01E10000)
-#define DAVINCI_MS_BASE				(0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	(0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE	(0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	(0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	(0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE		(0x0C000000)
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-davinci/i2c.h b/include/asm-arm/arch-davinci/i2c.h
deleted file mode 100644
index e2f54168abd1..000000000000
--- a/include/asm-arm/arch-davinci/i2c.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * DaVinci I2C controller platfrom_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
-	unsigned int	bus_freq;	/* standard bus frequency */
-	unsigned int	bus_delay;	/* transaction delay */
-};
-
-#endif /* __ASM_ARCH_I2C_H */
diff --git a/include/asm-arm/arch-davinci/io.h b/include/asm-arm/arch-davinci/io.h
deleted file mode 100644
index e7accb910864..000000000000
--- a/include/asm-arm/arch-davinci/io.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * DaVinci IO address definitions
- *
- * Copied from include/asm/arm/arch-omap/io.h
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-#define IO_PHYS		0x01c00000
-#define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
-#define IO_SIZE		0x00400000
-#define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define io_p2v(pa)	((pa) + IO_OFFSET)
-#define io_v2p(va)	((va) - IO_OFFSET)
-#define IO_ADDRESS(x)	io_p2v(x)
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define PCIO_BASE               0
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a)		(a)
-#define __mem_isa(a)		(a)
-
-#ifndef __ASSEMBLER__
-
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define davinci_readb(a)	(*(volatile unsigned char  *)IO_ADDRESS(a))
-#define davinci_readw(a)	(*(volatile unsigned short *)IO_ADDRESS(a))
-#define davinci_readl(a)	(*(volatile unsigned int   *)IO_ADDRESS(a))
-
-#define davinci_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define davinci_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define davinci_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
-
-/* 16 bit uses LDRH/STRH, base +/- offset_8 */
-typedef struct { volatile u16 offset[256]; } __regbase16;
-#define __REGV16(vaddr)		((__regbase16 *)((vaddr)&~0xff)) \
-					->offset[((vaddr)&0xff)>>1]
-#define __REG16(paddr)          __REGV16(io_p2v(paddr))
-
-/* 8/32 bit uses LDR/STR, base +/- offset_12 */
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-#define __REGV8(vaddr)		((__regbase8  *)((vaddr)&~4095)) \
-					->offset[((vaddr)&4095)>>0]
-#define __REG8(paddr)		__REGV8(io_p2v(paddr))
-
-typedef struct { volatile u32 offset[4096]; } __regbase32;
-#define __REGV32(vaddr)		((__regbase32 *)((vaddr)&~4095)) \
-					->offset[((vaddr)&4095)>>2]
-
-#define __REG(paddr)		__REGV32(io_p2v(paddr))
-#else
-
-#define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
-
-#endif /* __ASSEMBLER__ */
-#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-davinci/irqs.h b/include/asm-arm/arch-davinci/irqs.h
deleted file mode 100644
index f4c5ca6da9f4..000000000000
--- a/include/asm-arm/arch-davinci/irqs.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * DaVinci interrupt controller definitions
- *
- *  Copyright (C) 2006 Texas Instruments.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* Base address */
-#define DAVINCI_ARM_INTC_BASE 0x01C48000
-
-/* Interrupt lines */
-#define IRQ_VDINT0       0
-#define IRQ_VDINT1       1
-#define IRQ_VDINT2       2
-#define IRQ_HISTINT      3
-#define IRQ_H3AINT       4
-#define IRQ_PRVUINT      5
-#define IRQ_RSZINT       6
-#define IRQ_VFOCINT      7
-#define IRQ_VENCINT      8
-#define IRQ_ASQINT       9
-#define IRQ_IMXINT       10
-#define IRQ_VLCDINT      11
-#define IRQ_USBINT       12
-#define IRQ_EMACINT      13
-
-#define IRQ_CCINT0       16
-#define IRQ_CCERRINT     17
-#define IRQ_TCERRINT0    18
-#define IRQ_TCERRINT     19
-#define IRQ_PSCIN        20
-
-#define IRQ_IDE          22
-#define IRQ_HPIINT       23
-#define IRQ_MBXINT       24
-#define IRQ_MBRINT       25
-#define IRQ_MMCINT       26
-#define IRQ_SDIOINT      27
-#define IRQ_MSINT        28
-#define IRQ_DDRINT       29
-#define IRQ_AEMIFINT     30
-#define IRQ_VLQINT       31
-#define IRQ_TINT0_TINT12 32
-#define IRQ_TINT0_TINT34 33
-#define IRQ_TINT1_TINT12 34
-#define IRQ_TINT1_TINT34 35
-#define IRQ_PWMINT0      36
-#define IRQ_PWMINT1      37
-#define IRQ_PWMINT2      38
-#define IRQ_I2C          39
-#define IRQ_UARTINT0     40
-#define IRQ_UARTINT1     41
-#define IRQ_UARTINT2     42
-#define IRQ_SPINT0       43
-#define IRQ_SPINT1       44
-
-#define IRQ_DSP2ARM0     46
-#define IRQ_DSP2ARM1     47
-#define IRQ_GPIO0        48
-#define IRQ_GPIO1        49
-#define IRQ_GPIO2        50
-#define IRQ_GPIO3        51
-#define IRQ_GPIO4        52
-#define IRQ_GPIO5        53
-#define IRQ_GPIO6        54
-#define IRQ_GPIO7        55
-#define IRQ_GPIOBNK0     56
-#define IRQ_GPIOBNK1     57
-#define IRQ_GPIOBNK2     58
-#define IRQ_GPIOBNK3     59
-#define IRQ_GPIOBNK4     60
-#define IRQ_COMMTX       61
-#define IRQ_COMMRX       62
-#define IRQ_EMUINT       63
-
-#define DAVINCI_N_AINTC_IRQ	64
-#define DAVINCI_N_GPIO		71
-
-#define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
-
-#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-davinci/memory.h b/include/asm-arm/arch-davinci/memory.h
deleted file mode 100644
index dd1625c23cf4..000000000000
--- a/include/asm-arm/arch-davinci/memory.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * DaVinci memory space definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-#include <asm/page.h>
-#include <asm/sizes.h>
-
-/**************************************************************************
- * Definitions
- **************************************************************************/
-#define DAVINCI_DDR_BASE    0x80000000
-#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
-
-#define PHYS_OFFSET DAVINCI_DDR_BASE
-
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
-#ifndef __ASSEMBLY__
-/*
- * Restrict DMA-able region to workaround silicon bug.  The bug
- * restricts buffers available for DMA to video hardware to be
- * below 128M
- */
-static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
-{
-	unsigned int sz = (128<<20) >> PAGE_SHIFT;
-
-	if (node != 0)
-		sz = 0;
-
-	size[1] = size[0] - sz;
-	size[0] = sz;
-}
-
-#define arch_adjust_zones(node, zone_size, holes) \
-        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
-
-#endif
-
-/*
- * Bus address is physical address
- */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-davinci/mux.h b/include/asm-arm/arch-davinci/mux.h
deleted file mode 100644
index c24b6782804d..000000000000
--- a/include/asm-arm/arch-davinci/mux.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * DaVinci pin multiplexing defines
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0	0
-#define DAVINCI_MUX_AEAW1	1
-#define DAVINCI_MUX_AEAW2	2
-#define DAVINCI_MUX_AEAW3	3
-#define DAVINCI_MUX_AEAW4	4
-#define DAVINCI_MUX_AECS4	10
-#define DAVINCI_MUX_AECS5	11
-#define DAVINCI_MUX_VLYNQWD0	12
-#define DAVINCI_MUX_VLYNQWD1	13
-#define DAVINCI_MUX_VLSCREN	14
-#define DAVINCI_MUX_VLYNQEN	15
-#define DAVINCI_MUX_HDIREN	16
-#define DAVINCI_MUX_ATAEN	17
-#define DAVINCI_MUX_RGB666	22
-#define DAVINCI_MUX_RGB888	23
-#define DAVINCI_MUX_LOEEN	24
-#define DAVINCI_MUX_LFLDEN	25
-#define DAVINCI_MUX_CWEN	26
-#define DAVINCI_MUX_CFLDEN	27
-#define DAVINCI_MUX_HPIEN	29
-#define DAVINCI_MUX_1394EN	30
-#define DAVINCI_MUX_EMACEN	31
-
-#define DAVINCI_MUX_LEVEL2	32
-#define DAVINCI_MUX_UART0	(DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1	(DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2	(DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO	(DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0	(DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1	(DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2	(DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C		(DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI		(DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK	(DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP		(DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0	(DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1	(DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN	(DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
diff --git a/include/asm-arm/arch-davinci/psc.h b/include/asm-arm/arch-davinci/psc.h
deleted file mode 100644
index 4977aa071e1e..000000000000
--- a/include/asm-arm/arch-davinci/psc.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  DaVinci Power & Sleep Controller (PSC) defines
- *
- *  Copyright (C) 2006 Texas Instruments.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#ifndef __ASM_ARCH_PSC_H
-#define __ASM_ARCH_PSC_H
-
-/* Power and Sleep Controller (PSC) Domains */
-#define DAVINCI_GPSC_ARMDOMAIN      0
-#define DAVINCI_GPSC_DSPDOMAIN      1
-
-#define DAVINCI_LPSC_VPSSMSTR       0
-#define DAVINCI_LPSC_VPSSSLV        1
-#define DAVINCI_LPSC_TPCC           2
-#define DAVINCI_LPSC_TPTC0          3
-#define DAVINCI_LPSC_TPTC1          4
-#define DAVINCI_LPSC_EMAC           5
-#define DAVINCI_LPSC_EMAC_WRAPPER   6
-#define DAVINCI_LPSC_MDIO           7
-#define DAVINCI_LPSC_IEEE1394       8
-#define DAVINCI_LPSC_USB            9
-#define DAVINCI_LPSC_ATA            10
-#define DAVINCI_LPSC_VLYNQ          11
-#define DAVINCI_LPSC_UHPI           12
-#define DAVINCI_LPSC_DDR_EMIF       13
-#define DAVINCI_LPSC_AEMIF          14
-#define DAVINCI_LPSC_MMC_SD         15
-#define DAVINCI_LPSC_MEMSTICK       16
-#define DAVINCI_LPSC_McBSP          17
-#define DAVINCI_LPSC_I2C            18
-#define DAVINCI_LPSC_UART0          19
-#define DAVINCI_LPSC_UART1          20
-#define DAVINCI_LPSC_UART2          21
-#define DAVINCI_LPSC_SPI            22
-#define DAVINCI_LPSC_PWM0           23
-#define DAVINCI_LPSC_PWM1           24
-#define DAVINCI_LPSC_PWM2           25
-#define DAVINCI_LPSC_GPIO           26
-#define DAVINCI_LPSC_TIMER0         27
-#define DAVINCI_LPSC_TIMER1         28
-#define DAVINCI_LPSC_TIMER2         29
-#define DAVINCI_LPSC_SYSTEM_SUBSYS  30
-#define DAVINCI_LPSC_ARM            31
-#define DAVINCI_LPSC_SCR2           32
-#define DAVINCI_LPSC_SCR3           33
-#define DAVINCI_LPSC_SCR4           34
-#define DAVINCI_LPSC_CROSSBAR       35
-#define DAVINCI_LPSC_CFG27          36
-#define DAVINCI_LPSC_CFG3           37
-#define DAVINCI_LPSC_CFG5           38
-#define DAVINCI_LPSC_GEM            39
-#define DAVINCI_LPSC_IMCOP          40
-
-#endif /* __ASM_ARCH_PSC_H */
diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h
deleted file mode 100644
index ed418ef76805..000000000000
--- a/include/asm-arm/arch-davinci/serial.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/arch/io.h>
-
-#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h
deleted file mode 100644
index 440ac515804b..000000000000
--- a/include/asm-arm/arch-davinci/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-extern void davinci_watchdog_reset(void);
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static void arch_reset(char mode)
-{
-	davinci_watchdog_reset();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/timex.h b/include/asm-arm/arch-davinci/timex.h
deleted file mode 100644
index 52827567841d..000000000000
--- a/include/asm-arm/arch-davinci/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * DaVinci timer defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* The source frequency for the timers is the 27MHz clock */
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h
deleted file mode 100644
index f6d1570f7206..000000000000
--- a/include/asm-arm/arch-davinci/uncompress.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Serial port stubs for kernel decompress status messages
- *
- *  Author:     Anant Gole
- * (C) Copyright (C) 2006, Texas Instruments, Inc
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-/* PORT_16C550A, in polled non-fifo mode */
-
-static void putc(char c)
-{
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h
deleted file mode 100644
index 9b47fa89b333..000000000000
--- a/include/asm-arm/arch-davinci/vmalloc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * DaVinci vmalloc definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <asm/memory.h>
-#include <asm/arch/io.h>
-
-/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
-#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S
deleted file mode 100644
index 9213bfe4831d..000000000000
--- a/include/asm-arm/arch-ebsa110/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-**/
-
-		.macro	addruart,rx
-		mov	\rx, #0xf0000000
-		orr	\rx, \rx, #0x00000be0
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h
deleted file mode 100644
index c52f9e2ab0bb..000000000000
--- a/include/asm-arm/arch-ebsa110/dma.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 DMA definitions
- */
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S
deleted file mode 100644
index f242be5c49ba..000000000000
--- a/include/asm-arm/arch-ebsa110/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa110/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT		0xff000000	/* read */
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #IRQ_STAT
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
-	ldrb	\stat, [\base]			@ get interrupts
-	mov	\irqnr, #0
-	tst	\stat, #15
-	addeq	\irqnr, \irqnr, #4
-	moveq	\stat, \stat, lsr #4
-	tst	\stat, #3
-	addeq	\irqnr, \irqnr, #2
-	moveq	\stat, \stat, lsr #2
-	tst	\stat, #1
-	addeq	\irqnr, \irqnr, #1
-	moveq	\stat, \stat, lsr #1
-	tst	\stat, #1			@ bit 0 should be set
-	.endm
-
diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/include/asm-arm/arch-ebsa110/hardware.h
deleted file mode 100644
index 3ce864def41e..000000000000
--- a/include/asm-arm/arch-ebsa110/hardware.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/hardware.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region	IO region
- * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
- * f0000e60 - f0000e64	398 - 399
- * f0000de0 - f0000dfc	378 - 37f  lp0
- * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region	IO region
- * f00014f1             a79        pnp write data
- * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
- * f00004f1		279        pnp address
- * f0000440 - f000046c  220 - 236  eth0
- * f0000405		203        pnp read data
- */
-
-#define ISAMEM_PHYS		0xe0000000
-#define ISAMEM_SIZE		0x10000000
-
-#define ISAIO_PHYS		0xf0000000
-#define ISAIO_SIZE		PGDIR_SIZE
-
-#define TRICK0_PHYS		0xf2000000
-#define TRICK1_PHYS		0xf2400000
-#define TRICK2_PHYS		0xf2800000
-#define TRICK3_PHYS		0xf2c00000
-#define TRICK4_PHYS		0xf3000000
-#define TRICK5_PHYS		0xf3400000
-#define TRICK6_PHYS		0xf3800000
-#define TRICK7_PHYS		0xf3c00000
-
-#define ISAMEM_BASE		0xe0000000
-#define ISAIO_BASE		0xf0000000
-
-#define PIT_BASE		0xfc000000
-#define SOFT_BASE		0xfd000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
-
-#endif
-
diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h
deleted file mode 100644
index 44a4001de807..000000000000
--- a/include/asm-arm/arch-ebsa110/io.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/io.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-u8 __inb8(unsigned int port);
-void __outb8(u8  val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8  val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8  __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8  val, void __iomem *addr);
-void __writew(u16 val, void __iomem *addr);
-void __writel(u32 val, void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line.  We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) 			__inb16(p)
-#define outb(v,p)		__outb16(v,p)
-#else
-#define inb(p)			__inb8(p)
-#define outb(v,p)		__outb8(v,p)
-#endif
-
-#define inw(p)			__inw(p)
-#define outw(v,p)		__outw(v,p)
-
-#define inl(p)			__inl(p)
-#define outl(v,p)		__outl(v,p)
-
-#define readb(b)		__readb(b)
-#define readw(b)		__readw(b)
-#define readl(b)		__readl(b)
-#define readb_relaxed(addr)	readb(addr)
-#define readw_relaxed(addr)	readw(addr)
-#define readl_relaxed(addr)	readl(addr)
-
-#define writeb(v,b)		__writeb(v,b)
-#define writew(v,b)		__writew(v,b)
-#define writel(v,b)		__writel(v,b)
-
-static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
-					   unsigned int flags)
-{
-	return (void __iomem *)cookie;
-}
-
-#define __arch_ioremap		__arch_ioremap
-#define __arch_iounmap(cookie)	do { } while (0)
-
-extern void insb(unsigned int port, void *buf, int sz);
-extern void insw(unsigned int port, void *buf, int sz);
-extern void insl(unsigned int port, void *buf, int sz);
-
-extern void outsb(unsigned int port, const void *buf, int sz);
-extern void outsw(unsigned int port, const void *buf, int sz);
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-extern void writesw(void __iomem *addr, const void *data, int wordlen);
-extern void writesl(void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-extern void readsw(const void __iomem *addr, void *data, int wordlen);
-extern void readsl(const void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/include/asm-arm/arch-ebsa110/irqs.h
deleted file mode 100644
index ded9bd9d7b8b..000000000000
--- a/include/asm-arm/arch-ebsa110/irqs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define NR_IRQS			8
-
-#define IRQ_EBSA110_PRINTER	0
-#define IRQ_EBSA110_COM1	1
-#define IRQ_EBSA110_COM2	2
-#define IRQ_EBSA110_ETHERNET	3
-#define IRQ_EBSA110_TIMER0	4
-#define IRQ_EBSA110_TIMER1	5
-#define IRQ_EBSA110_PCMCIA	6
-#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h
deleted file mode 100644
index c7c500e176d0..000000000000
--- a/include/asm-arm/arch-ebsa110/memory.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * We keep this 1:1 so that we don't interfere
- * with the PCMCIA memory regions
- */
-#define __virt_to_bus(x)	(x)
-#define __bus_to_virt(x)	(x)
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/system.h b/include/asm-arm/arch-ebsa110/system.h
deleted file mode 100644
index d7c8fece0bc5..000000000000
--- a/include/asm-arm/arch-ebsa110/system.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/system.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#define arch_reset(mode)	cpu_reset(0x80000000)
-
-#endif
diff --git a/include/asm-arm/arch-ebsa110/timex.h b/include/asm-arm/arch-ebsa110/timex.h
deleted file mode 100644
index 1e9ef045092b..000000000000
--- a/include/asm-arm/arch-ebsa110/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE		47894000
-
diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h
deleted file mode 100644
index ae5b775eb0b7..000000000000
--- a/include/asm-arm/arch-ebsa110/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/uncompress.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE	((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while (!(v & UART_LSR_THRE));
-
-	base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
-		 (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/include/asm-arm/arch-ebsa110/vmalloc.h
deleted file mode 100644
index 26674ba4683c..000000000000
--- a/include/asm-arm/arch-ebsa110/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa110/vmalloc.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S
deleted file mode 100644
index b48cec4a0c45..000000000000
--- a/include/asm-arm/arch-ebsa285/debug-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/include/asm-arm/arch-ebsa285/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/dec21285.h>
-
-#ifndef CONFIG_DEBUG_DC21285_PORT
-	/* For NetWinder debugging */
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x7c000000	@ physical
-		movne	\rx, #0xff000000	@ virtual
-		orr	\rx, \rx, #0x000003f8
-		.endm
-
-#define UART_SHIFT	0
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
-
-#else
-	/* For EBSA285 debugging */
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x42000000
-		movne	\rx, #dc21285_high
-		.if	dc21285_low
-		orrne	\rx, \rx, #dc21285_low
-		.endif
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x160]	@ UARTDR
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
-		tst	\rd, #1 << 3
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-#endif
diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h
deleted file mode 100644
index 0259ad45d33c..000000000000
--- a/include/asm-arm/arch-ebsa285/dma.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/dma.h
- *
- *  Architecture DMA routines
- *
- *  Copyright (C) 1998,1999 Russell King
- *  Copyright (C) 1998,1999 Philip Blundell
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x)		(0+(x))
-#define _DC21285_DMA(x)		(8+(x))
-
-#define MAX_DMA_CHANNELS	10
-
-#define DMA_FLOPPY		_ISA_DMA(2)
-#define DMA_ISA_CASCADE		_ISA_DMA(4)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
deleted file mode 100644
index e63064edb734..000000000000
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-arm/arch-ebsa285/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/hardware/dec21285.h>
-
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #dc21285_high
-		.if	dc21285_low
-		orr	\base, \base, #dc21285_low
-		.endif
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0x180]	@ get interrupts
-
-		mov	\irqnr, #IRQ_SDRAMPARITY
-		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_RX
-		movne	\irqnr, #IRQ_CONRX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA1
-		movne	\irqnr, #IRQ_DMA1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA2
-		movne	\irqnr, #IRQ_DMA2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN0
-		movne	\irqnr, #IRQ_IN0
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN1
-		movne	\irqnr, #IRQ_IN1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN2
-		movne	\irqnr, #IRQ_IN2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN3
-		movne	\irqnr, #IRQ_IN3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI
-		movne	\irqnr, #IRQ_PCI
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
-		movne	\irqnr, #IRQ_DOORBELLHOST
-		bne     1001f
-
-		tst	\irqstat, #IRQ_MASK_I2OINPOST
-		movne	\irqnr, #IRQ_I2OINPOST
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER1
-		movne	\irqnr, #IRQ_TIMER1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER2
-		movne	\irqnr, #IRQ_TIMER2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER3
-		movne	\irqnr, #IRQ_TIMER3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_TX
-		movne	\irqnr, #IRQ_CONTX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_ABORT
-		movne	\irqnr, #IRQ_PCI_ABORT
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_SERR
-		movne	\irqnr, #IRQ_PCI_SERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
-		movne	\irqnr, #IRQ_DISCARD_TIMER
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_DPERR
-		movne	\irqnr, #IRQ_PCI_DPERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_PERR
-		movne	\irqnr, #IRQ_PCI_PERR
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h
deleted file mode 100644
index 74610c2c63d4..000000000000
--- a/include/asm-arm/arch-ebsa285/hardware.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/hardware.h
- *
- *  Copyright (C) 1998-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the EBSA-285.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-/*   Virtual      Physical	Size
- * 0xff800000	0x40000000	1MB	X-Bus
- * 0xff000000	0x7c000000	1MB	PCI I/O space
- * 0xfe000000	0x42000000	1MB	CSR
- * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
- * 0xfc000000	0x79000000	1MB	PCI IACK/special space
- * 0xfb000000	0x7a000000	16MB	PCI Config type 1
- * 0xfa000000	0x7b000000	16MB	PCI Config type 0
- * 0xf9000000	0x50000000	1MB	Cache flush
- * 0xf0000000	0x80000000	16MB	ISA memory
- */
-#define XBUS_SIZE		0x00100000
-#define XBUS_BASE		0xff800000
-
-#define PCIO_SIZE		0x00100000
-#define PCIO_BASE		0xff000000
-
-#define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		0xfe000000
-
-#define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		0xfd000000
-
-#define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		0xfc000000
-
-#define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		0xfb000000
-
-#define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		0xfa000000
-
-#define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		0xf0000000
-
-#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_LED_AMBER		(1 << 0)
-#define XBUS_LED_GREEN		(1 << 1)
-#define XBUS_LED_RED		(1 << 2)
-#define XBUS_LED_TOGGLE		(1 << 8)
-
-#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
-#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
-#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
-#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
-
-#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
-
-
-/* PIC irq control */
-#define PIC_LO			0x20
-#define PIC_MASK_LO		0x21
-#define PIC_HI			0xA0
-#define PIC_MASK_HI		0xA1
-
-/* GPIO pins */
-#define GPIO_CCLK		0x800
-#define GPIO_DSCLK		0x400
-#define GPIO_E2CLK		0x200
-#define GPIO_IOLOAD		0x100
-#define GPIO_RED_LED		0x080
-#define GPIO_WDTIMER		0x040
-#define GPIO_DATA		0x020
-#define GPIO_IOCLK		0x010
-#define GPIO_DONE		0x008
-#define GPIO_FAN		0x004
-#define GPIO_GREEN_LED		0x002
-#define GPIO_RESET		0x001
-
-/* CPLD pins */
-#define CPLD_DS_ENABLE		8
-#define CPLD_7111_DISABLE	4
-#define CPLD_UNMUTE		2
-#define CPLD_FLASH_WR_ENABLE	1
-
-#ifndef __ASSEMBLY__
-extern void gpio_modify_op(int mask, int set);
-extern void gpio_modify_io(int mask, int in);
-extern int  gpio_read(void);
-extern void cpld_modify(int mask, int set);
-#endif
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x1000
-#define PCIBIOS_MIN_MEM 	0x81000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
deleted file mode 100644
index f9c729141860..000000000000
--- a/include/asm-arm/arch-ebsa285/io.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/io.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Modifications:
- *   06-12-1997	RMK	Created.
- *   07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * Translation of various region addresses to virtual addresses
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#if 1
-#define __mem_pci(a)		(a)
-#else
-
-static inline void __iomem *___mem_pci(void __iomem *p)
-{
-	unsigned long a = (unsigned long)p;
-	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
-	return p;
-}
-
-#define __mem_pci(a)		___mem_pci(a)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/include/asm-arm/arch-ebsa285/irqs.h
deleted file mode 100644
index 3e766f1cecf1..000000000000
--- a/include/asm-arm/arch-ebsa285/irqs.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/irqs.h
- *
- * Copyright (C) 1998 Russell King
- * Copyright (C) 1998 Phil Blundell
- *
- * Changelog:
- *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
- *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
- */
-#include <asm/mach-types.h>
-
-#define NR_IRQS			36
-#define NR_DC21285_IRQS		16
-
-#define _ISA_IRQ(x)		(0 + (x))
-#define _ISA_INR(x)		((x) - 0)
-#define _DC21285_IRQ(x)		(16 + (x))
-#define _DC21285_INR(x)		((x) - 16)
-
-/*
- * This is a list of all interrupts that the 21285
- * can generate and we handle.
- */
-#define IRQ_CONRX		_DC21285_IRQ(0)
-#define IRQ_CONTX		_DC21285_IRQ(1)
-#define IRQ_TIMER1		_DC21285_IRQ(2)
-#define IRQ_TIMER2		_DC21285_IRQ(3)
-#define IRQ_TIMER3		_DC21285_IRQ(4)
-#define IRQ_IN0			_DC21285_IRQ(5)
-#define IRQ_IN1			_DC21285_IRQ(6)
-#define IRQ_IN2			_DC21285_IRQ(7)
-#define IRQ_IN3			_DC21285_IRQ(8)
-#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
-#define IRQ_DMA1		_DC21285_IRQ(10)
-#define IRQ_DMA2		_DC21285_IRQ(11)
-#define IRQ_PCI			_DC21285_IRQ(12)
-#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
-#define IRQ_I2OINPOST		_DC21285_IRQ(14)
-#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
-#define IRQ_PCI_SERR		_DC21285_IRQ(16)
-#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
-#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
-#define IRQ_PCI_PERR		_DC21285_IRQ(19)
-
-#define IRQ_ISA_TIMER		_ISA_IRQ(0)
-#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
-#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
-#define IRQ_ISA_UART2		_ISA_IRQ(3)
-#define IRQ_ISA_UART		_ISA_IRQ(4)
-#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
-#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
-#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
-#define IRQ_ISA_2		_ISA_IRQ(9)
-#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
-#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
-#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
-
-#define IRQ_MASK_UART_RX	(1 << 2)
-#define IRQ_MASK_UART_TX	(1 << 3)
-#define IRQ_MASK_TIMER1		(1 << 4)
-#define IRQ_MASK_TIMER2		(1 << 5)
-#define IRQ_MASK_TIMER3		(1 << 6)
-#define IRQ_MASK_IN0		(1 << 8)
-#define IRQ_MASK_IN1		(1 << 9)
-#define IRQ_MASK_IN2		(1 << 10)
-#define IRQ_MASK_IN3		(1 << 11)
-#define IRQ_MASK_DOORBELLHOST	(1 << 15)
-#define IRQ_MASK_DMA1		(1 << 16)
-#define IRQ_MASK_DMA2		(1 << 17)
-#define IRQ_MASK_PCI		(1 << 18)
-#define IRQ_MASK_SDRAMPARITY	(1 << 24)
-#define IRQ_MASK_I2OINPOST	(1 << 25)
-#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
-#define IRQ_MASK_PCI_SERR	(1 << 23)
-#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
-#define IRQ_MASK_PCI_DPERR	(1 << 28)
-#define IRQ_MASK_PCI_PERR	(1 << 31)
-
-/*
- * Netwinder interrupt allocations
- */
-#define IRQ_NETWINDER_ETHER10	IRQ_IN0
-#define IRQ_NETWINDER_ETHER100	IRQ_IN1
-#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
-#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
-#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
-#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
-#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
-#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
-
-#undef RTC_IRQ
-#define RTC_IRQ		IRQ_ISA_RTC_ALARM
-#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
-#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
-#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
-
-#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h
deleted file mode 100644
index 9019a3bf5ab9..000000000000
--- a/include/asm-arm/arch-ebsa285/memory.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
- *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
- *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
- *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
- *			Renamed to memory.h
- *			Moved PAGE_OFFSET and TASK_SIZE here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-#endif
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-#define __virt_to_bus(x)	((x) - 0xe0000000)
-#define __bus_to_virt(x)	((x) + 0xe0000000)
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
-/* Task size and page offset at 3GB */
-#define TASK_SIZE		UL(0xbf000000)
-#define PAGE_OFFSET		UL(0xc0000000)
-
-/*
- * Cache flushing area.
- */
-#define FLUSH_BASE		0xf9000000
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		UL(0x00000000)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#define FLUSH_BASE_PHYS		0x50000000
-
-#endif
diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h
deleted file mode 100644
index bf91c695c4b5..000000000000
--- a/include/asm-arm/arch-ebsa285/system.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/hardware/dec21285.h>
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/*
-		 * Jump into the ROM
-		 */
-		cpu_reset(0x41000000);
-	} else {
-		if (machine_is_netwinder()) {
-			/* open up the SuperIO chip
-			 */
-			outb(0x87, 0x370);
-			outb(0x87, 0x370);
-
-			/* aux function group 1 (logical device 7)
-			 */
-			outb(0x07, 0x370);
-			outb(0x07, 0x371);
-
-			/* set GP16 for WD-TIMER output
-			 */
-			outb(0xe6, 0x370);
-			outb(0x00, 0x371);
-
-			/* set a RED LED and toggle WD_TIMER for rebooting
-			 */
-			outb(0xc4, 0x338);
-		} else {
-			/* 
-			 * Force the watchdog to do a CPU reset.
-			 *
-			 * After making sure that the watchdog is disabled
-			 * (so we can change the timer registers) we first
-			 * enable the timer to autoreload itself.  Next, the
-			 * timer interval is set really short and any
-			 * current interrupt request is cleared (so we can
-			 * see an edge transition).  Finally, TIMER4 is
-			 * enabled as the watchdog.
-			 */
-			*CSR_SA110_CNTL &= ~(1 << 13);
-			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
-					   TIMER_CNTL_AUTORELOAD |
-					   TIMER_CNTL_DIV16;
-			*CSR_TIMER4_LOAD = 0x2;
-			*CSR_TIMER4_CLR  = 0;
-			*CSR_SA110_CNTL |= (1 << 13);
-		}
-	}
-}
diff --git a/include/asm-arm/arch-ebsa285/timex.h b/include/asm-arm/arch-ebsa285/timex.h
deleted file mode 100644
index df60b3812d96..000000000000
--- a/include/asm-arm/arch-ebsa285/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/timex.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h
deleted file mode 100644
index 86142c882b3a..000000000000
--- a/include/asm-arm/arch-ebsa285/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/uncompress.h
- *
- *  Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/mach-types.h>
-
-/*
- * Note! This could cause problems on the NetWinder
- */
-#define DC21285_BASE ((volatile unsigned int *)0x42000160)
-#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
-
-static inline void putc(char c)
-{
-	if (machine_is_netwinder()) {
-		while ((SER0_BASE[5] & 0x60) != 0x60)
-			barrier();
-		SER0_BASE[0] = c;
-	} else {
-		while (DC21285_BASE[6] & 8);
-		DC21285_BASE[0] = c;
-	}
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h
deleted file mode 100644
index e487d7e8c8a6..000000000000
--- a/include/asm-arm/arch-ebsa285/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-ebsa285/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S
deleted file mode 100644
index 397565a0c671..000000000000
--- a/include/asm-arm/arch-ep93xx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/debug-macro.S
- * Debugging macro include header
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rx, \rx, #0x000c0000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h
deleted file mode 100644
index 898b3ab7fd46..000000000000
--- a/include/asm-arm/arch-ep93xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/dma.h
- */
diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S
deleted file mode 100644
index 241ec221a047..000000000000
--- a/include/asm-arm/arch-ep93xx/entry-macro.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/entry-macro.S
- * IRQ demultiplexing for EP93xx
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <asm/arch/ep93xx-regs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
-		orr	\base, \base, #0x000b0000
-		mov	\irqnr, #0
-		ldr	\irqstat, [\base]		@ lower 32 interrupts
-		cmp	\irqstat, #0
-		bne	1001f
-
-		eor	\base, \base, #0x00070000
-		ldr	\irqstat, [\base]		@ upper 32 interrupts
-		cmp	\irqstat, #0
-		beq	1002f
-		mov	\irqnr, #0x20
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:
-		.endm
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
deleted file mode 100644
index 625c6f0abc03..000000000000
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt		phys		size
- * fe800000			5M		per-platform mappings
- * fed00000	80800000	2M		APB
- * fef00000	80000000	1M		AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE		0x80000000
-#define EP93XX_AHB_VIRT_BASE		0xfef00000
-#define EP93XX_AHB_SIZE			0x00100000
-
-#define EP93XX_APB_PHYS_BASE		0x80800000
-#define EP93XX_APB_VIRT_BASE		0xfed00000
-#define EP93XX_APB_SIZE			0x00200000
-
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE			(EP93XX_AHB_VIRT_BASE + 0x00000000)
-
-#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
-
-#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
-
-#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
-
-#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
-
-#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
-
-#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
-
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
-#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
-
-#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
-
-#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
-#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
-#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
-#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
-#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
-
-#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
-
-#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
-
-#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
-
-#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
-
-#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
-
-#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
-
-#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
-
-#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
-
-#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
-
-#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
-
-#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
-#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
-#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
-#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
-
-#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h
deleted file mode 100644
index 4d0b3023bff7..000000000000
--- a/include/asm-arm/arch-ep93xx/gesbc9312.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gesbc9312.h
- */
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
deleted file mode 100644
index 186e7c715f8a..000000000000
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/gpio.h
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/* GPIO port A.  */
-#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B.  */
-#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C.  */
-#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D.  */
-#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
-#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E.  */
-#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F.  */
-#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
-#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G.  */
-#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H.  */
-#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
-#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
-
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-/*
- * Map GPIO A0..A7  (0..7)  to irq 64..71,
- *          B0..B7  (7..15) to irq 72..79, and
- *          F0..F7 (16..24) to irq 80..87.
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h
deleted file mode 100644
index 9b69f454065d..000000000000
--- a/include/asm-arm/arch-ep93xx/hardware.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/hardware.h
- */
-
-#include "ep93xx-regs.h"
-
-#define pcibios_assign_all_busses()	0
-
-#include "platform.h"
-
-#include "gesbc9312.h"
-#include "ts72xx.h"
diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h
deleted file mode 100644
index 7b4d25e29060..000000000000
--- a/include/asm-arm/arch-ep93xx/io.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/io.h
- */
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(p)			((void __iomem *)(p))
-#define __mem_pci(p)		(p)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
deleted file mode 100644
index 53d4a68bfc88..000000000000
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX		2
-#define IRQ_EP93XX_COMMTX		3
-#define IRQ_EP93XX_TIMER1		4
-#define IRQ_EP93XX_TIMER2		5
-#define IRQ_EP93XX_AACINTR		6
-#define IRQ_EP93XX_DMAM2P0		7
-#define IRQ_EP93XX_DMAM2P1		8
-#define IRQ_EP93XX_DMAM2P2		9
-#define IRQ_EP93XX_DMAM2P3		10
-#define IRQ_EP93XX_DMAM2P4		11
-#define IRQ_EP93XX_DMAM2P5		12
-#define IRQ_EP93XX_DMAM2P6		13
-#define IRQ_EP93XX_DMAM2P7		14
-#define IRQ_EP93XX_DMAM2P8		15
-#define IRQ_EP93XX_DMAM2P9		16
-#define IRQ_EP93XX_DMAM2M0		17
-#define IRQ_EP93XX_DMAM2M1		18
-#define IRQ_EP93XX_GPIO0MUX		19
-#define IRQ_EP93XX_GPIO1MUX		20
-#define IRQ_EP93XX_GPIO2MUX		21
-#define IRQ_EP93XX_GPIO3MUX		22
-#define IRQ_EP93XX_UART1RX		23
-#define IRQ_EP93XX_UART1TX		24
-#define IRQ_EP93XX_UART2RX		25
-#define IRQ_EP93XX_UART2TX		26
-#define IRQ_EP93XX_UART3RX		27
-#define IRQ_EP93XX_UART3TX		28
-#define IRQ_EP93XX_KEY			29
-#define IRQ_EP93XX_TOUCH		30
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_EXT0			32
-#define IRQ_EP93XX_EXT1			33
-#define IRQ_EP93XX_EXT2			34
-#define IRQ_EP93XX_64HZ			35
-#define IRQ_EP93XX_WATCHDOG		36
-#define IRQ_EP93XX_RTC			37
-#define IRQ_EP93XX_IRDA			38
-#define IRQ_EP93XX_ETHERNET		39
-#define IRQ_EP93XX_EXT3			40
-#define IRQ_EP93XX_PROG			41
-#define IRQ_EP93XX_1HZ			42
-#define IRQ_EP93XX_VSYNC		43
-#define IRQ_EP93XX_VIDEO_FIFO		44
-#define IRQ_EP93XX_SSP1RX		45
-#define IRQ_EP93XX_SSP1TX		46
-#define IRQ_EP93XX_GPIO4MUX		47
-#define IRQ_EP93XX_GPIO5MUX		48
-#define IRQ_EP93XX_GPIO6MUX		49
-#define IRQ_EP93XX_GPIO7MUX		50
-#define IRQ_EP93XX_TIMER3		51
-#define IRQ_EP93XX_UART1		52
-#define IRQ_EP93XX_SSP			53
-#define IRQ_EP93XX_UART2		54
-#define IRQ_EP93XX_UART3		55
-#define IRQ_EP93XX_USB			56
-#define IRQ_EP93XX_ETHERNET_PME		57
-#define IRQ_EP93XX_DSP			58
-#define IRQ_EP93XX_GPIO_AB		59
-#define IRQ_EP93XX_SAI			60
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(64 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h
deleted file mode 100644
index 4b1a5c7c8363..000000000000
--- a/include/asm-arm/arch-ep93xx/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __bus_to_virt(x)	__phys_to_virt(x)
-#define __virt_to_bus(x)	__virt_to_phys(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
deleted file mode 100644
index 44eccec2cba4..000000000000
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
-struct ep93xx_eth_data
-{
-	unsigned char	dev_addr[6];
-	unsigned char	phy_id;
-};
-
-
-#endif
diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h
deleted file mode 100644
index 79b718586746..000000000000
--- a/include/asm-arm/arch-ep93xx/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/system.h
- */
-
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	u32 devicecfg;
-
-	local_irq_disable();
-
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-
-	while (1)
-		;
-}
diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h
deleted file mode 100644
index 4140bddc97e2..000000000000
--- a/include/asm-arm/arch-ep93xx/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/timex.h
- */
-
-#define CLOCK_TICK_RATE		983040
diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
deleted file mode 100644
index a94f63ff0535..000000000000
--- a/include/asm-arm/arch-ep93xx/ts72xx.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt		phys		size
- * febff000	22000000	4K	model number register
- * febfe000	22400000	4K	options register
- * febfd000	22800000	4K	options register #2
- * febfc000	[67]0000000	4K	NAND data register
- * febfb000	[67]0400000	4K	NAND control register
- * febfa000	[67]0800000	4K	NAND busy register
- * febf9000	10800000	4K	TS-5620 RTC index register
- * febf8000	11700000	4K	TS-5620 RTC data register
- */
-
-#define TS72XX_MODEL_PHYS_BASE		0x22000000
-#define TS72XX_MODEL_VIRT_BASE		0xfebff000
-#define TS72XX_MODEL_SIZE		0x00001000
-
-#define TS72XX_MODEL_TS7200		0x00
-#define TS72XX_MODEL_TS7250		0x01
-#define TS72XX_MODEL_TS7260		0x02
-
-
-#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
-#define TS72XX_OPTIONS_SIZE		0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485	0x02
-#define TS72XX_OPTIONS_MAX197		0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
-#define TS72XX_OPTIONS2_SIZE		0x00001000
-
-#define TS72XX_OPTIONS2_TS9420		0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
-
-
-#define TS72XX_NOR_PHYS_BASE		0x60000000
-#define TS72XX_NOR2_PHYS_BASE		0x62000000
-
-#define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
-#define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
-#define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
-#define TS72XX_NAND_DATA_SIZE		0x00001000
-
-#define TS72XX_NAND1_CONTROL_PHYS_BASE	0x60400000
-#define TS72XX_NAND2_CONTROL_PHYS_BASE	0x70400000
-#define TS72XX_NAND_CONTROL_VIRT_BASE	0xfebfb000
-#define TS72XX_NAND_CONTROL_SIZE	0x00001000
-
-#define TS72XX_NAND1_BUSY_PHYS_BASE	0x60800000
-#define TS72XX_NAND2_BUSY_PHYS_BASE	0x70800000
-#define TS72XX_NAND_BUSY_VIRT_BASE	0xfebfa000
-#define TS72XX_NAND_BUSY_SIZE		0x00001000
-
-
-#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
-#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
-#define TS72XX_RTC_INDEX_SIZE		0x00001000
-
-#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
-#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
-#define TS72XX_RTC_DATA_SIZE		0x00001000
-
-
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline int board_is_ts7200(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
-}
-
-static inline int is_max197_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-					TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
-					TS72XX_OPTIONS2_TS9420);
-}
-#endif
diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h
deleted file mode 100644
index c15274c85d5d..000000000000
--- a/include/asm-arm/arch-ep93xx/uncompress.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/uncompress.h
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <asm/arch/ep93xx-regs.h>
-
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void __raw_writeb(unsigned char value, unsigned int ptr)
-{
-	*((volatile unsigned char *)ptr) = value;
-}
-
-static void __raw_writel(unsigned int value, unsigned int ptr)
-{
-	*((volatile unsigned int *)ptr) = value;
-}
-
-
-#define PHYS_UART1_DATA		0x808c0000
-#define PHYS_UART1_FLAG		0x808c0018
-#define UART1_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 1000; i++) {
-		/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART1_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
-/*
- * Some bootloaders don't turn off DMA from the ethernet MAC before
- * jumping to linux, which means that we might end up with bits of RX
- * status and packet data scribbled over the uncompressed kernel image.
- * Work around this by resetting the ethernet MAC before we uncompress.
- */
-#define PHYS_ETH_SELF_CTL		0x80010020
-#define ETH_SELF_CTL_RESET		0x00000001
-
-static void ethernet_reset(void)
-{
-	unsigned int v;
-
-	/* Reset the ethernet MAC.  */
-	v = __raw_readl(PHYS_ETH_SELF_CTL);
-	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
-
-	/* Wait for reset to finish.  */
-	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
-		;
-}
-
-
-static void arch_decomp_setup(void)
-{
-	ethernet_reset();
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h
deleted file mode 100644
index 205ea6b1cf5e..000000000000
--- a/include/asm-arm/arch-ep93xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ep93xx/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-h720x/boards.h b/include/asm-arm/arch-h720x/boards.h
deleted file mode 100644
index 8021f81f0742..000000000000
--- a/include/asm-arm/arch-h720x/boards.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/boards.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the board specific defines for various devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
-#error Do not include this file directly. Include asm/hardware.h instead !
-#endif
-
-/* Hynix H7202 developer board specific device defines */
-#ifdef CONFIG_ARCH_H7202
-
-/* FLASH */
-#define FLASH_VIRT		0xd0000000
-#define FLASH_PHYS		0x00000000
-#define FLASH_SIZE		0x02000000
-
-/* onboard LAN controller */
-# define ETH0_PHYS		0x08000000
-
-/* Touch screen defines */
-/* GPIO Port */
-#define PEN_GPIO		GPIO_B_VIRT
-/* Bitmask for pen down interrupt */
-#define PEN_INT_BIT		(1<<7)
-/* Bitmask for pen up interrupt */
-#define PEN_ENA_BIT		(1<<6)
-/* pen up interrupt */
-#define IRQ_PEN			IRQ_MUX_GPIOB(7)
-
-#endif
-
-/* Hynix H7201 developer board specific device defines */
-#if defined (CONFIG_ARCH_H7201)
-/* ROM DISK SPACE */
-#define ROM_DISK_BASE           0xc1800000
-#define ROM_DISK_START          0x41800000
-#define ROM_DISK_SIZE           0x00700000
-
-/* SRAM DISK SPACE */
-#define SRAM_DISK_BASE          0xf1000000
-#define SRAM_DISK_START         0x04000000
-#define SRAM_DISK_SIZE          0x00400000
-#endif
-
diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/include/asm-arm/arch-h720x/debug-macro.S
deleted file mode 100644
index 82822d362733..000000000000
--- a/include/asm-arm/arch-h720x/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-h720x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
-
-		.macro  addruart,rx
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1  	       @ MMU enabled?
-		moveq   \rx, #io_phys	       @ physical base address
-		movne   \rx, #io_virt	       @ virtual address
-		add     \rx, \rx, #0x00020000   @ UART1
-		.endm
-
-		.macro  senduart,rd,rx
-		str     \rd, [\rx, #0x0]        @ UARTDR
-
-		.endm
-
-		.macro  waituart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
-		bne     1001b
-		.endm
-
-		.macro  busyuart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
-		bne     1001b
-		.endm
diff --git a/include/asm-arm/arch-h720x/dma.h b/include/asm-arm/arch-h720x/dma.h
deleted file mode 100644
index bfc6636679f7..000000000000
--- a/include/asm-arm/arch-h720x/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS	3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS	4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/include/asm-arm/arch-h720x/entry-macro.S
deleted file mode 100644
index 38dd63ae104e..000000000000
--- a/include/asm-arm/arch-h720x/entry-macro.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-h720x/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
-		@ we could use the id register on H7202, but this is not
-		@ properly updated when we come back from asm_do_irq
-		@ without a previous return from interrupt
-		@ (see loops below in irq_svc, irq_usr)
-		@ We see unmasked pending ints only, as the masked pending ints
-		@ are not visible here
-
-		mov     \base, #0xf0000000	       @ base register
-		orr     \base, \base, #0x24000	       @ irqbase
-		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
-		ldr	\tmp, =0x001fffff
-#else
-		mvn     \tmp, #0xc0000000
-#endif
-		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
-		mov     \irqnr, #0
-
-		mov     \tmp, #0xff00
-		orr     \tmp, \tmp, #0xff
-		tst     \irqstat, \tmp
-		addeq   \irqnr, \irqnr, #16
-		moveq   \irqstat, \irqstat, lsr #16
-		tst     \irqstat, #255
-		addeq   \irqnr, \irqnr, #8
-		moveq   \irqstat, \irqstat, lsr #8
-		tst     \irqstat, #15
-		addeq   \irqnr, \irqnr, #4
-		moveq   \irqstat, \irqstat, lsr #4
-		tst     \irqstat, #3
-		addeq   \irqnr, \irqnr, #2
-		moveq   \irqstat, \irqstat, lsr #2
-		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tst     \irqstat, #1		       @ bit 0 should be set
-		.endm
-
-		.macro  irq_prio_table
-		.endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-
diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/include/asm-arm/arch-h720x/h7201-regs.h
deleted file mode 100644
index 49d4f6bd3080..000000000000
--- a/include/asm-arm/arch-h720x/h7201-regs.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/h7201-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
-#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
-
-/*
- * PCMCIA
- */
-#define PCMCIA0_ATT_BASE        0xe5000000
-#define PCMCIA0_ATT_SIZE        0x00200000
-#define PCMCIA0_ATT_START       0x20000000
-#define PCMCIA0_MEM_BASE        0xe5200000
-#define PCMCIA0_MEM_SIZE        0x00200000
-#define PCMCIA0_MEM_START       0x24000000
-#define PCMCIA0_IO_BASE         0xe5400000
-#define PCMCIA0_IO_SIZE         0x00200000
-#define PCMCIA0_IO_START        0x28000000
-
-#define PCMCIA1_ATT_BASE        0xe5600000
-#define PCMCIA1_ATT_SIZE        0x00200000
-#define PCMCIA1_ATT_START       0x30000000
-#define PCMCIA1_MEM_BASE        0xe5800000
-#define PCMCIA1_MEM_SIZE        0x00200000
-#define PCMCIA1_MEM_START       0x34000000
-#define PCMCIA1_IO_BASE         0xe5a00000
-#define PCMCIA1_IO_SIZE         0x00200000
-#define PCMCIA1_IO_START        0x38000000
-
-#define PRIME3C_BASE            0xf0050000
-#define PRIME3C_SIZE            0x00001000
-#define PRIME3C_START           0x10000000
-
-/* VGA Controller */
-#define VGA_RAMBASE 		0x50
-#define VGA_TIMING0 		0x60
-#define VGA_TIMING1 		0x64
-#define VGA_TIMING2 		0x68
-#define VGA_TIMING3 		0x6c
-
-#define LCD_CTRL_VGA_ENABLE   	0x00000100
-#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
-#define LCD_CTRL_VGA_4BPP    	0x00000000
-#define LCD_CTRL_VGA_8BPP    	0x00000200
-#define LCD_CTRL_VGA_16BPP   	0x00000300
-#define LCD_CTRL_SHARE_DMA    	0x00000800
-#define LCD_CTRL_VDE          	0x00100000
-#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
-#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
-
-#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/include/asm-arm/arch-h720x/h7202-regs.h
deleted file mode 100644
index 43d8ba8a6013..000000000000
--- a/include/asm-arm/arch-h720x/h7202-regs.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/h7202-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_OFS		0x2d000
-#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
-#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
-#define SERIAL3_OFS		0x2e000
-#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
-#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
-
-/* Matrix Keyboard Controller */
-#define KBD_VIRT		(IO_VIRT + 0x22000)
-#define KBD_KBCR		0x00
-#define KBD_KBSC		0x04
-#define KBD_KBTR		0x08
-#define KBD_KBVR0		0x0C
-#define KBD_KBVR1		0x10
-#define KBD_KBSR		0x18
-
-#define KBD_KBCR_SCANENABLE	(1 << 7)
-#define KBD_KBCR_NPOWERDOWN	(1 << 2)
-#define KBD_KBCR_CLKSEL_MASK	(3)
-#define KBD_KBCR_CLKSEL_PCLK2	0x0
-#define KBD_KBCR_CLKSEL_PCLK128	0x1
-#define KBD_KBCR_CLKSEL_PCLK256	0x2
-#define KBD_KBCR_CLKSEL_PCLK512	0x3
-
-#define KBD_KBSR_INTR		(1 << 0)
-#define KBD_KBSR_WAKEUP		(1 << 1)
-
-/* USB device controller */
-
-#define USBD_BASE		(IO_VIRT + 0x12000)
-#define USBD_LENGTH		0x3C
-
-#define USBD_GCTRL		0x00
-#define USBD_EPCTRL		0x04
-#define USBD_INTMASK		0x08
-#define USBD_INTSTAT		0x0C
-#define USBD_PWR		0x10
-#define USBD_DMARXTX		0x14
-#define USBD_DEVID		0x18
-#define USBD_DEVCLASS		0x1C
-#define USBD_INTCLASS		0x20
-#define USBD_SETUP0		0x24
-#define USBD_SETUP1		0x28
-#define USBD_ENDP0RD		0x2C
-#define USBD_ENDP0WT		0x30
-#define USBD_ENDP1RD		0x34
-#define USBD_ENDP2WT		0x38
-
-/* PS/2 port */
-#define PSDATA 0x00
-#define PSSTAT 0x04
-#define PSSTAT_TXEMPTY (1<<0)
-#define PSSTAT_TXBUSY (1<<1)
-#define PSSTAT_RXFULL (1<<2)
-#define PSSTAT_RXBUSY (1<<3)
-#define PSSTAT_CLKIN (1<<4)
-#define PSSTAT_DATAIN (1<<5)
-#define PSSTAT_PARITY (1<<6)
-
-#define PSCONF 0x08
-#define PSCONF_ENABLE (1<<0)
-#define PSCONF_TXINTEN (1<<2)
-#define PSCONF_RXINTEN (1<<3)
-#define PSCONF_FORCECLKLOW (1<<4)
-#define PSCONF_FORCEDATLOW (1<<5)
-#define PSCONF_LCE (1<<6)
-
-#define PSINTR 0x0C
-#define PSINTR_TXINT (1<<0)
-#define PSINTR_RXINT (1<<1)
-#define PSINTR_PAR (1<<2)
-#define PSINTR_RXTO (1<<3)
-#define PSINTR_TXTO (1<<4)
-
-#define PSTDLO 0x10 /* clk low before start transmission */
-#define PSTPRI 0x14 /* PRI clock */
-#define PSTXMT 0x18 /* maximum transmission time */
-#define PSTREC 0x20 /* maximum receive time */
-#define PSPWDN 0x3c
-
-/* ADC converter */
-#define ADC_BASE 		(IO_VIRT + 0x29000)
-#define ADC_CR 			0x00
-#define ADC_TSCTRL 		0x04
-#define ADC_BT_CTRL 		0x08
-#define ADC_MC_CTRL		0x0C
-#define ADC_STATUS		0x10
-
-/* ADC control register bits */
-#define ADC_CR_PW_CTRL 		0x80
-#define ADC_CR_DIRECTC		0x04
-#define ADC_CR_CONTIME_NO	0x00
-#define ADC_CR_CONTIME_2	0x04
-#define ADC_CR_CONTIME_4	0x08
-#define ADC_CR_CONTIME_ADE	0x0c
-#define ADC_CR_LONGCALTIME	0x01
-
-/* ADC touch panel register bits */
-#define ADC_TSCTRL_ENABLE 	0x80
-#define ADC_TSCTRL_INTR   	0x40
-#define	ADC_TSCTRL_SWBYPSS	0x20
-#define ADC_TSCTRL_SWINVT	0x10
-#define ADC_TSCTRL_S400   	0x03
-#define ADC_TSCTRL_S200   	0x02
-#define ADC_TSCTRL_S100   	0x01
-#define ADC_TSCTRL_S50    	0x00
-
-/* ADC Interrupt Status Register bits */
-#define ADC_STATUS_TS_BIT	0x80
-#define ADC_STATUS_MBT_BIT	0x40
-#define ADC_STATUS_BBT_BIT	0x20
-#define ADC_STATUS_MIC_BIT	0x10
-
-/* Touch data registers */
-#define ADC_TS_X0X1  		0x30
-#define ADC_TS_X2X3		0x34
-#define ADC_TS_Y0Y1		0x38
-#define ADC_TS_Y2Y3  		0x3c
-#define ADC_TS_X4X5  		0x40
-#define ADC_TS_X6X7  		0x44
-#define ADC_TS_Y4Y5		0x48
-#define ADC_TS_Y6Y7		0x50
-
-/* battery data */
-#define ADC_MB_DATA		0x54
-#define ADC_BB_DATA		0x58
-
-/* Sound data register */
-#define ADC_SD_DAT0 		0x60
-#define ADC_SD_DAT1		0x64
-#define ADC_SD_DAT2		0x68
-#define ADC_SD_DAT3		0x6c
-#define ADC_SD_DAT4		0x70
-#define ADC_SD_DAT5		0x74
-#define ADC_SD_DAT6		0x78
-#define ADC_SD_DAT7		0x7c
diff --git a/include/asm-arm/arch-h720x/hardware.h b/include/asm-arm/arch-h720x/hardware.h
deleted file mode 100644
index dfb778906a9f..000000000000
--- a/include/asm-arm/arch-h720x/hardware.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT			0xf0000000	/* IO peripherals */
-#define IO_PHYS			0x80000000
-#define IO_SIZE			0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT		(GPIO_VIRT(0))
-#define GPIO_B_VIRT		(GPIO_VIRT(1))
-#define GPIO_C_VIRT		(GPIO_VIRT(2))
-#define GPIO_D_VIRT		(GPIO_VIRT(3))
-#define GPIO_E_VIRT		(GPIO_VIRT(4))
-#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2	(1<<5)
-#define AMULSEL_USOUT2	(1<<6)
-#define AMULSEL_USIN3	(1<<13)
-#define AMULSEL_USOUT3	(1<<14)
-#define AMULSEL_IRDIN	(1<<15)
-#define AMULSEL_IRDOUT	(1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA		0x00
-#define GPIO_DIR		0x04
-#define GPIO_MASK		0x08
-#define GPIO_STAT		0x0C
-#define GPIO_EDGE		0x10
-#define GPIO_CLR		0x14
-#define GPIO_POL		0x18
-#define GPIO_EN			0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT		(IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER		0x00
-#define IRQC_ISR		0x04
-
-/* timer unit */
-#define TIMER_VIRT		(IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD   		0x00
-#define TM0_COUNT    		0x08
-#define TM0_CTRL     		0x10
-#define TM1_PERIOD   		0x20
-#define TM1_COUNT    		0x28
-#define TM1_CTRL     		0x30
-#define TM2_PERIOD   		0x40
-#define TM2_COUNT    		0x48
-#define TM2_CTRL     		0x50
-#define TIMER_TOPCTRL		0x60
-#define TIMER_TOPSTAT		0x64
-#define T64_COUNTL		0x80
-#define T64_COUNTH		0x84
-#define T64_CTRL		0x88
-#define T64_BASEL		0x94
-#define T64_BASEH		0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT		0x1
-#define TSTAT_T1INT		0x2
-#define TSTAT_T2INT		0x4
-#define TSTAT_T3INT		0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START  		0x1
-#define TM_REPEAT 		0x2
-#define TM_RESET  		0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR  	0x1
-#define ENABLE_TM1_INTR  	0x2
-#define ENABLE_TM2_INTR  	0x4
-#define TIMER_ENABLE_BIT 	0x8
-#define ENABLE_TIMER64   	0x10
-#define ENABLE_TIMER64_INT	0x20
-
-/* PMU & PLL */
-#define PMU_BASE 		(IO_VIRT + 0x1000)
-#define PMU_MODE		0x00
-#define PMU_STAT   		0x20
-#define PMU_PLL_CTRL 		0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW		0x00
-#define PMU_MODE_RUN		0x01
-#define PMU_MODE_IDLE		0x02
-#define PMU_MODE_SLEEP		0x03
-#define PMU_MODE_INIT		0x04
-#define PMU_MODE_DEEPSLEEP	0x07
-#define PMU_MODE_WAKEUP		0x08
-
-/* PMU ... */
-#define PLL_2_EN		0x8000
-#define PLL_1_EN		0x4000
-#define PLL_3_MUTE		0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET		0x00010000
-#define PLL_CTRL_MASK23		0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE 		(IO_VIRT + 0x10000)
-#define LCD_CTRL 		0x00
-#define LCD_STATUS		0x04
-#define LCD_STATUS_M		0x08
-#define LCD_INTERRUPT		0x0C
-#define LCD_DBAR		0x10
-#define LCD_DCAR		0x14
-#define LCD_TIMING0 		0x20
-#define LCD_TIMING1 		0x24
-#define LCD_TIMING2 		0x28
-#define LCD_TEST		0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE   	0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
-#define LCD_CTRL_LCD_4BPP    	0x00000000
-#define LCD_CTRL_LCD_8BPP    	0x00000002
-#define LCD_CTRL_LCD_16BPP   	0x00000004
-#define LCD_CTRL_LCD_BW		0x00000008
-#define LCD_CTRL_LCD_TFT	0x00000010
-#define LCD_CTRL_BGR		0x00001000
-#define LCD_CTRL_LCD_VCOMP	0x00080000
-#define LCD_CTRL_LCD_MONO8	0x00200000
-#define LCD_CTRL_LCD_PWR	0x00400000
-#define LCD_CTRL_LCD_BLE	0x00800000
-#define LCD_CTRL_LDBUSEN	0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS		0x20000
-#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS		0x21000
-#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE		0x30
-#define SERIAL_ENABLE_EN	(1<<0)
-
-/* General defines to pacify gcc */
-#define PCIO_BASE 		(0)	/* for inb, outb and friends */
-#define PCIO_VIRT		PCIO_BASE
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
deleted file mode 100644
index d3ccfd8172b7..000000000000
--- a/include/asm-arm/arch-h720x/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *
- *  09-19-2001	JJKIM
- *  		Created from linux/include/asm-arm/arch-l7200/io.h
- *
- *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
- *  		re-unified header files for h720x
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		((void __iomem *)(a))
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/irqs.h b/include/asm-arm/arch-h720x/irqs.h
deleted file mode 100644
index 8244413988be..000000000000
--- a/include/asm-arm/arch-h720x/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU		0		/* 0x000001 */
-#define IRQ_DMA		1 		/* 0x000002 */
-#define IRQ_LCD		2		/* 0x000004 */
-#define IRQ_VGA		3 		/* 0x000008 */
-#define IRQ_PCMCIA1 	4 		/* 0x000010 */
-#define IRQ_PCMCIA2 	5 		/* 0x000020 */
-#define IRQ_AFE		6 		/* 0x000040 */
-#define IRQ_AIC		7 		/* 0x000080 */
-#define IRQ_KEYBOARD 	8 		/* 0x000100 */
-#define IRQ_TIMER0	9 		/* 0x000200 */
-#define IRQ_RTC		10		/* 0x000400 */
-#define IRQ_SOUND	11		/* 0x000800 */
-#define IRQ_USB		12		/* 0x001000 */
-#define IRQ_IrDA 	13		/* 0x002000 */
-#define IRQ_UART0	14		/* 0x004000 */
-#define IRQ_UART1	15		/* 0x008000 */
-#define IRQ_SPI		16		/* 0x010000 */
-#define IRQ_GPIOA 	17		/* 0x020000 */
-#define IRQ_GPIOB	18		/* 0x040000 */
-#define IRQ_GPIOC	19		/* 0x080000 */
-#define IRQ_GPIOD	20		/* 0x100000 */
-#define IRQ_CommRX	21		/* 0x200000 */
-#define IRQ_CommTX	22		/* 0x400000 */
-#define IRQ_Soft	23		/* 0x800000 */
-
-#define NR_GLBL_IRQS	24
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
-			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU		0		/* 0x00000001 */
-#define IRQ_DMA		1		/* 0x00000002 */
-#define IRQ_LCD		2		/* 0x00000004 */
-#define IRQ_SOUND	3		/* 0x00000008 */
-#define IRQ_I2S		4		/* 0x00000010 */
-#define IRQ_USB 	5		/* 0x00000020 */
-#define IRQ_MMC 	6		/* 0x00000040 */
-#define IRQ_RTC 	7		/* 0x00000080 */
-#define IRQ_UART0 	8		/* 0x00000100 */
-#define IRQ_UART1 	9		/* 0x00000200 */
-#define IRQ_UART2 	10		/* 0x00000400 */
-#define IRQ_UART3 	11		/* 0x00000800 */
-#define IRQ_KBD 	12		/* 0x00001000 */
-#define IRQ_PS2 	13		/* 0x00002000 */
-#define IRQ_AIC 	14		/* 0x00004000 */
-#define IRQ_TIMER0 	15		/* 0x00008000 */
-#define IRQ_TIMERX 	16		/* 0x00010000 */
-#define IRQ_WDT 	17		/* 0x00020000 */
-#define IRQ_CAN0 	18		/* 0x00040000 */
-#define IRQ_CAN1 	19		/* 0x00080000 */
-#define IRQ_EXT0 	20		/* 0x00100000 */
-#define IRQ_EXT1 	21		/* 0x00200000 */
-#define IRQ_GPIOA 	22		/* 0x00400000 */
-#define IRQ_GPIOB 	23		/* 0x00800000 */
-#define IRQ_GPIOC 	24		/* 0x01000000 */
-#define IRQ_GPIOD 	25		/* 0x02000000 */
-#define IRQ_GPIOE 	26		/* 0x04000000 */
-#define IRQ_COMMRX 	27		/* 0x08000000 */
-#define IRQ_COMMTX 	28		/* 0x10000000 */
-#define IRQ_SMC 	29		/* 0x20000000 */
-#define IRQ_Soft 	30		/* 0x40000000 */
-#define IRQ_RESERVED1 	31		/* 0x80000000 */
-#define NR_GLBL_IRQS	32
-
-#define NR_TIMERX_IRQS	3
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
-			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
-			(1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif
diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h
deleted file mode 100644
index 53e923dba76e..000000000000
--- a/include/asm-arm/arch-h720x/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Page offset:
- *    ( 0xc0000000UL )
- */
-#define PHYS_OFFSET	UL(0x40000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- *
- * There is something to do here later !, Mar 2000, Jungjun Kim
- */
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h
deleted file mode 100644
index 8dc1460b2305..000000000000
--- a/include/asm-arm/arch-h720x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * linux/include/asm-arm/arch-h720x/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <asm/hardware.h>
-
-static void arch_idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-
-static __inline__ void arch_reset(char mode)
-{
-	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-#endif
diff --git a/include/asm-arm/arch-h720x/timex.h b/include/asm-arm/arch-h720x/timex.h
deleted file mode 100644
index 48a391c4080f..000000000000
--- a/include/asm-arm/arch-h720x/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/timex.h
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX
-#define __ASM_ARCH_TIMEX
-
-#define CLOCK_TICK_RATE		3686400
-
-#endif
diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h
deleted file mode 100644
index 18c69e0f3585..000000000000
--- a/include/asm-arm/arch-h720x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/hardware.h>
-
-#define LSR 	0x14
-#define TEMPTY 	0x40
-
-static inline void putc(int c)
-{
-	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
-	/* wait until transmit buffer is empty */
-	while((p[LSR] & TEMPTY) == 0x0)
-		barrier();
-
-	/* write next character */
-	*p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/include/asm-arm/arch-h720x/vmalloc.h
deleted file mode 100644
index b4693cb821ef..000000000000
--- a/include/asm-arm/arch-h720x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/vmalloc.h
- */
-
-#ifndef __ARCH_ARM_VMALLOC_H
-#define __ARCH_ARM_VMALLOC_H
-
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
-
-#endif
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
deleted file mode 100644
index c611871643a2..000000000000
--- a/include/asm-arm/arch-imx/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h
deleted file mode 100644
index 621ff2c730f2..000000000000
--- a/include/asm-arm/arch-imx/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T        2
-#define DMA_REQ_UART3_R        3
-#define DMA_REQ_SSI2_T         4
-#define DMA_REQ_SSI2_R         5
-#define DMA_REQ_CSI_STAT       6
-#define DMA_REQ_CSI_R          7
-#define DMA_REQ_MSHC           8
-#define DMA_REQ_DSPA_DCT_DOUT  9
-#define DMA_REQ_DSPA_DCT_DIN  10
-#define DMA_REQ_DSPA_MAC      11
-#define DMA_REQ_EXT           12
-#define DMA_REQ_SDHC          13
-#define DMA_REQ_SPI1_R        14
-#define DMA_REQ_SPI1_T        15
-#define DMA_REQ_SSI_T         16
-#define DMA_REQ_SSI_R         17
-#define DMA_REQ_ASP_DAC       18
-#define DMA_REQ_ASP_ADC       19
-#define DMA_REQ_USP_EP(x)    (20+(x))
-#define DMA_REQ_SPI2_R        26
-#define DMA_REQ_SPI2_T        27
-#define DMA_REQ_UART2_T       28
-#define DMA_REQ_UART2_R       29
-#define DMA_REQ_UART1_T       30
-#define DMA_REQ_UART1_R       31
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
deleted file mode 100644
index 0b84e81031c3..000000000000
--- a/include/asm-arm/arch-imx/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-imx/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/include/asm-arm/arch-imx/gpio.h b/include/asm-arm/arch-imx/gpio.h
deleted file mode 100644
index 486023263f32..000000000000
--- a/include/asm-arm/arch-imx/gpio.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <asm/arch/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h
deleted file mode 100644
index 6542ca5e8c33..000000000000
--- a/include/asm-arm/arch-imx/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h
deleted file mode 100644
index 44d89c35539a..000000000000
--- a/include/asm-arm/arch-imx/imx-dma.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <asm/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS  11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void *data;
-	dmamode_t  dma_mode;
-	struct scatterlist *sg;
-	unsigned int sgbc;
-	unsigned int sgcount;
-	unsigned int resbytes;
-	int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST     1
-#define IMX_DMA_ERR_REQUEST   2
-#define IMX_DMA_ERR_TRANSFER  4
-#define IMX_DMA_ERR_BUFFER    8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr, dmamode_t dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, dmamode_t dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h
deleted file mode 100644
index fb9de2733879..000000000000
--- a/include/asm-arm/arch-imx/imx-regs.h
+++ /dev/null
@@ -1,482 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- *  Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART	(1<<22)
-#define CSCR_MPLL_RESTART	(1<<21)
-#define CSCR_SYSTEM_SEL		(1<<16)
-#define CSCR_BCLK_DIV		(0xf<<10)
-#define CSCR_MPU_PRESC		(1<<15)
-#define CSCR_SPEN		(1<<1)
-#define CSCR_MPEN		(1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX  3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT   (1<<7)
-#define GPIO_IN    (0<<7)
-#define GPIO_PUEN  (1<<8)
-
-#define GPIO_PF    (0<<9)
-#define GPIO_AF    (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN   (0<<10)
-#define GPIO_BIN   (1<<10)
-#define GPIO_CIN   (2<<10)
-#define GPIO_DR    (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT     (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0   (2<<12)
-#define GPIO_AOUT_1   (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT      (0<<14)
-#define GPIO_BOUT_ISR  (1<<14)
-#define GPIO_BOUT_0    (2<<14)
-#define GPIO_BOUT_1    (3<<14)
-
-#define GPIO_GIUS      (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
-#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
-#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
-#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
-#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
-#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
-
-#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
-#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
-#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
-#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
-#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
-#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
-#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
-#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
-#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
-
-/*
- *  DMA Controller
- */
-#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
-#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
-#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
-#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
-#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
-#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
-#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
-#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
-#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
-#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
-#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
-#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
-#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
-#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
-#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
-#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
-#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
-#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff )
-#define CNTR_CNT(x)        ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
-#define CCR_DMOD_2D        ( 0x1 << 12 )
-#define CCR_DMOD_FIFO      ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
-#define CCR_SMOD_2D        ( 0x1 << 10 )
-#define CCR_SMOD_FIFO      ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        ( 0x0 << 6 )
-#define CCR_DSIZ_8         ( 0x1 << 6 )
-#define CCR_DSIZ_16        ( 0x2 << 6 )
-#define CCR_SSIZ_32        ( 0x0 << 4 )
-#define CCR_SSIZ_8         ( 0x1 << 4 )
-#define CCR_SSIZ_16        ( 0x2 << 4 )
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- *  Interrupt controller
- */
-
-#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD       (1<<19)
-#define INTCNTL_NIAD       (1<<20)
-
-#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
-
-/*
- *  General purpose timers
- */
-#define IMX_TCTL(x)        __REG( 0x00 + (x))
-#define TCTL_SWR           (1<<15)
-#define TCTL_FRR           (1<<8)
-#define TCTL_CAP_RIS       (1<<6)
-#define TCTL_CAP_FAL       (2<<6)
-#define TCTL_CAP_RIS_FAL   (3<<6)
-#define TCTL_OM            (1<<5)
-#define TCTL_IRQEN         (1<<4)
-#define TCTL_CLK_PCLK1     (1<<1)
-#define TCTL_CLK_PCLK1_16  (2<<1)
-#define TCTL_CLK_TIN       (3<<1)
-#define TCTL_CLK_32        (4<<1)
-#define TCTL_TEN           (1<<0)
-
-#define IMX_TPRER(x)       __REG( 0x04 + (x))
-#define IMX_TCMP(x)        __REG( 0x08 + (x))
-#define IMX_TCR(x)         __REG( 0x0C + (x))
-#define IMX_TCN(x)         __REG( 0x10 + (x))
-#define IMX_TSTAT(x)       __REG( 0x14 + (x))
-#define TSTAT_CAPT         (1<<1)
-#define TSTAT_COMP         (1<<0)
-
-/*
- * LCD Controller
- */
-
-#define LCDC_SSA	__REG(IMX_LCDC_BASE+0x00)
-
-#define LCDC_SIZE	__REG(IMX_LCDC_BASE+0x04)
-#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
-#define SIZE_YMAX(y)    ( (y) & 0x1ff )
-
-#define LCDC_VPW	__REG(IMX_LCDC_BASE+0x08)
-#define VPW_VPW(x)	( (x) & 0x3ff )
-
-#define LCDC_CPOS	__REG(IMX_LCDC_BASE+0x0C)
-#define CPOS_CC1        (1<<31)
-#define CPOS_CC0        (1<<30)
-#define CPOS_OP         (1<<28)
-#define CPOS_CXP(x)     (((x) & 3ff) << 16)
-#define CPOS_CYP(y)     ((y) & 0x1ff)
-
-#define LCDC_LCWHB	__REG(IMX_LCDC_BASE+0x10)
-#define LCWHB_BK_EN     (1<<31)
-#define LCWHB_CW(w)     (((w) & 0x1f) << 24)
-#define LCWHB_CH(h)     (((h) & 0x1f) << 16)
-#define LCWHB_BD(x)     ((x) & 0xff)
-
-#define LCDC_LCHCC	__REG(IMX_LCDC_BASE+0x14)
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-
-#define LCDC_PCR	__REG(IMX_LCDC_BASE+0x18)
-#define PCR_TFT         (1<<31)
-#define PCR_COLOR       (1<<30)
-#define PCR_PBSIZ_1     (0<<28)
-#define PCR_PBSIZ_2     (1<<28)
-#define PCR_PBSIZ_4     (2<<28)
-#define PCR_PBSIZ_8     (3<<28)
-#define PCR_BPIX_1      (0<<25)
-#define PCR_BPIX_2      (1<<25)
-#define PCR_BPIX_4      (2<<25)
-#define PCR_BPIX_8      (3<<25)
-#define PCR_BPIX_12     (4<<25)
-#define PCR_BPIX_16     (4<<25)
-#define PCR_PIXPOL      (1<<24)
-#define PCR_FLMPOL      (1<<23)
-#define PCR_LPPOL       (1<<22)
-#define PCR_CLKPOL      (1<<21)
-#define PCR_OEPOL       (1<<20)
-#define PCR_SCLKIDLE    (1<<19)
-#define PCR_END_SEL     (1<<18)
-#define PCR_END_BYTE_SWAP (1<<17)
-#define PCR_REV_VS      (1<<16)
-#define PCR_ACD_SEL     (1<<15)
-#define PCR_ACD(x)      (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL    (1<<7)
-#define PCR_SHARP       (1<<6)
-#define PCR_PCD(x)      ((x) & 0x3f)
-
-#define LCDC_HCR	__REG(IMX_LCDC_BASE+0x1C)
-#define HCR_H_WIDTH(x)  (((x) & 0x3f) << 26)
-#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
-#define HCR_H_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_VCR	__REG(IMX_LCDC_BASE+0x20)
-#define VCR_V_WIDTH(x)  (((x) & 0x3f) << 26)
-#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
-#define VCR_V_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_POS	__REG(IMX_LCDC_BASE+0x24)
-#define POS_POS(x)      ((x) & 1f)
-
-#define LCDC_LSCR1	__REG(IMX_LCDC_BASE+0x28)
-#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x)            (((x) & 0xf))
-
-#define LCDC_PWMR	__REG(IMX_LCDC_BASE+0x2C)
-#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK      (1<<15)
-#define PWMR_SCR1       (1<<10)
-#define PWMR_SCR0       (1<<9)
-#define PWMR_CC_EN      (1<<8)
-#define PWMR_PW(x)      ((x) & 0xff)
-
-#define LCDC_DMACR	__REG(IMX_LCDC_BASE+0x30)
-#define DMACR_BURST     (1<<31)
-#define DMACR_HM(x)     (((x) & 0xf) << 16)
-#define DMACR_TM(x)     ((x) &0xf)
-
-#define LCDC_RMCR	__REG(IMX_LCDC_BASE+0x34)
-#define RMCR_LCDC_EN		(1<<1)
-#define RMCR_SELF_REF		(1<<0)
-
-#define LCDC_LCDICR	__REG(IMX_LCDC_BASE+0x38)
-#define LCDICR_INT_SYN  (1<<2)
-#define LCDICR_INT_CON  (1)
-
-#define LCDC_LCDISR	__REG(IMX_LCDC_BASE+0x40)
-#define LCDISR_UDR_ERR (1<<3)
-#define LCDISR_ERR_RES (1<<2)
-#define LCDISR_EOF     (1<<1)
-#define LCDISR_BOF     (1<<0)
-
-#endif				// _IMX_REGS_H
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h
deleted file mode 100644
index d54eb1d48026..000000000000
--- a/include/asm-arm/arch-imx/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-};
-
-#endif
diff --git a/include/asm-arm/arch-imx/imxfb.h b/include/asm-arm/arch-imx/imxfb.h
deleted file mode 100644
index 3ed9ec8b9f00..000000000000
--- a/include/asm-arm/arch-imx/imxfb.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * This structure describes the machine which we are running on.
- */
-struct imxfb_mach_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_int		nonstd;
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		pcr;
-	u_int		pwmr;
-	u_int		lscr1;
-	u_int		dmacr;
-
-	u_char * fixed_screen_cpu;
-	dma_addr_t fixed_screen_dma;
-
-	void (*lcd_power)(int);
-	void (*backlight_power)(int);
-};
-void set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info);
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
deleted file mode 100644
index b191cdd05576..000000000000
--- a/include/asm-arm/arch-imx/io.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		((void __iomem *)(a))
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
deleted file mode 100644
index f195542898e0..000000000000
--- a/include/asm-arm/arch-imx/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <asm/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h
deleted file mode 100644
index 5ad90127915f..000000000000
--- a/include/asm-arm/arch-imx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-imx/mmc.h b/include/asm-arm/arch-imx/mmc.h
deleted file mode 100644
index 4712f354dcca..000000000000
--- a/include/asm-arm/arch-imx/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
-	int (*card_present)(struct device *);
-	int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h
deleted file mode 100644
index d90fa4b49ce1..000000000000
--- a/include/asm-arm/arch-imx/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imx/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS		0x10000000
-#define MX1ADS_FLASH_SIZE		(16*1024*1024)
-
-#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/include/asm-arm/arch-imx/spi_imx.h b/include/asm-arm/arch-imx/spi_imx.h
deleted file mode 100644
index 2165449e976e..000000000000
--- a/include/asm-arm/arch-imx/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-arm/arch-imx/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/include/asm-arm/arch-pxa/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects - 1.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-	u8 num_chipselect;
-	u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *	sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *	dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *	I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-	u8	enable_loopback:1;
-	u8	enable_dma:1;
-	u8	ins_ss_pulse:1;
-	u16	bclk_wait:15;
-	void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT			(1 << 0)
-#define SPI_CS_DEASSERT			(1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h
deleted file mode 100644
index c645fe9afb9d..000000000000
--- a/include/asm-arm/arch-imx/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h
deleted file mode 100644
index e22ba789546c..000000000000
--- a/include/asm-arm/arch-imx/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/include/asm-arm/imx/timex.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(16000000)
-
-#endif
diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h
deleted file mode 100644
index da333f69136f..000000000000
--- a/include/asm-arm/arch-imx/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imxads/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h
deleted file mode 100644
index cb6169127068..000000000000
--- a/include/asm-arm/arch-imx/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-imx/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-integrator/bits.h b/include/asm-arm/arch-integrator/bits.h
deleted file mode 100644
index 09b024e0496a..000000000000
--- a/include/asm-arm/arch-integrator/bits.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Bit field definitions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __bits_h
-#define __bits_h                        1
-
-#define BIT0                            0x00000001
-#define BIT1                            0x00000002
-#define BIT2                            0x00000004
-#define BIT3                            0x00000008
-#define BIT4                            0x00000010
-#define BIT5                            0x00000020
-#define BIT6                            0x00000040
-#define BIT7                            0x00000080
-#define BIT8                            0x00000100
-#define BIT9                            0x00000200
-#define BIT10                           0x00000400
-#define BIT11                           0x00000800
-#define BIT12                           0x00001000
-#define BIT13                           0x00002000
-#define BIT14                           0x00004000
-#define BIT15                           0x00008000
-#define BIT16                           0x00010000
-#define BIT17                           0x00020000
-#define BIT18                           0x00040000
-#define BIT19                           0x00080000
-#define BIT20                           0x00100000
-#define BIT21                           0x00200000
-#define BIT22                           0x00400000
-#define BIT23                           0x00800000
-#define BIT24                           0x01000000
-#define BIT25                           0x02000000
-#define BIT26                           0x04000000
-#define BIT27                           0x08000000
-#define BIT28                           0x10000000
-#define BIT29                           0x20000000
-#define BIT30                           0x40000000
-#define BIT31                           0x80000000
-
-#endif
-
-/*         END */
diff --git a/include/asm-arm/arch-integrator/cm.h b/include/asm-arm/arch-integrator/cm.h
deleted file mode 100644
index 1ab353e23595..000000000000
--- a/include/asm-arm/arch-integrator/cm.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * update the core module control register.
- */
-void cm_control(u32, u32);
-
-#define CM_CTRL_LED			(1 << 0)
-#define CM_CTRL_nMBDET			(1 << 1)
-#define CM_CTRL_REMAP			(1 << 2)
-#define CM_CTRL_RESET			(1 << 3)
-
-/*
- * Integrator/AP,PP2 specific
- */
-#define CM_CTRL_HIGHVECTORS		(1 << 4)
-#define CM_CTRL_BIGENDIAN		(1 << 5)
-#define CM_CTRL_FASTBUS			(1 << 6)
-#define CM_CTRL_SYNC			(1 << 7)
-
-/*
- * ARM926/946/966 Integrator/CP specific
- */
-#define CM_CTRL_LCDBIASEN		(1 << 8)
-#define CM_CTRL_LCDBIASUP		(1 << 9)
-#define CM_CTRL_LCDBIASDN		(1 << 10)
-#define CM_CTRL_LCDMUXSEL_MASK		(7 << 11)
-#define CM_CTRL_LCDMUXSEL_GENLCD	(1 << 11)
-#define CM_CTRL_LCDMUXSEL_VGA_16BPP	(2 << 11)
-#define CM_CTRL_LCDMUXSEL_SHARPLCD	(3 << 11)
-#define CM_CTRL_LCDMUXSEL_VGA_8421BPP	(4 << 11)
-#define CM_CTRL_LCDEN0			(1 << 14)
-#define CM_CTRL_LCDEN1			(1 << 15)
-#define CM_CTRL_STATIC1			(1 << 16)
-#define CM_CTRL_STATIC2			(1 << 17)
-#define CM_CTRL_STATIC			(1 << 18)
-#define CM_CTRL_n24BITEN		(1 << 19)
-#define CM_CTRL_EBIWP			(1 << 20)
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
deleted file mode 100644
index 85b327c352df..000000000000
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-integrator/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x16000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x16000000 >> 4
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h
deleted file mode 100644
index 83fd6bbaf9d3..000000000000
--- a/include/asm-arm/arch-integrator/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S
deleted file mode 100644
index 491af1a23de5..000000000000
--- a/include/asm-arm/arch-integrator/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-integrator/entry-macro.S
- *
- * Low-level IRQ helper macros for Integrator platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* FIXME: should not be using soo many LDRs here */
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
-		mov	\irqnr, #IRQ_PIC_START
-		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
-		teq	\irqstat, #0
-		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
-		moveq	\irqnr, #IRQ_CIC_START
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-		.endm
-
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
deleted file mode 100644
index 6f0947bc500d..000000000000
--- a/include/asm-arm/arch-integrator/hardware.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/hardware.h
- *
- *  This file contains the hardware definitions of the Integrator.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE			0xF0000000                 // VA of IO 
-#define IO_SIZE			0x0B000000                 // How much?
-#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
-
-#define PCIO_BASE		PCI_IO_VADDR
-#define PCIMEM_BASE		PCI_MEMORY_VADDR
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x6000
-#define PCIBIOS_MIN_MEM 	0x00100000
-
-#endif
-
diff --git a/include/asm-arm/arch-integrator/impd1.h b/include/asm-arm/arch-integrator/impd1.h
deleted file mode 100644
index d75de4b14237..000000000000
--- a/include/asm-arm/arch-integrator/impd1.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#define IMPD1_OSC1	0x00
-#define IMPD1_OSC2	0x04
-#define IMPD1_LOCK	0x08
-#define IMPD1_LEDS	0x0c
-#define IMPD1_INT	0x10
-#define IMPD1_SW	0x14
-#define IMPD1_CTRL	0x18
-
-#define IMPD1_CTRL_DISP_LCD	(0 << 0)
-#define IMPD1_CTRL_DISP_VGA	(1 << 0)
-#define IMPD1_CTRL_DISP_LCD1	(2 << 0)
-#define IMPD1_CTRL_DISP_ENABLE	(1 << 2)
-#define IMPD1_CTRL_DISP_MASK	(7 << 0)
-
-struct device;
-
-void impd1_tweak_control(struct device *dev, u32 mask, u32 val);
-
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
deleted file mode 100644
index c8f2175948bd..000000000000
--- a/include/asm-arm/arch-integrator/io.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR        0xe8000000
-#define PCI_CONFIG_VADDR        0xec000000
-#define PCI_V3_VADDR            0xed000000
-#define PCI_IO_VADDR            0xee000000
-
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/irqs.h b/include/asm-arm/arch-integrator/irqs.h
deleted file mode 100644
index ba7b3afee445..000000000000
--- a/include/asm-arm/arch-integrator/irqs.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* 
- *  Interrupt numbers
- */
-#define IRQ_PIC_START			0
-#define IRQ_SOFTINT			0
-#define IRQ_UARTINT0			1
-#define IRQ_UARTINT1			2
-#define IRQ_KMIINT0			3
-#define IRQ_KMIINT1			4
-#define IRQ_TIMERINT0			5
-#define IRQ_TIMERINT1			6
-#define IRQ_TIMERINT2			7
-#define IRQ_RTCINT			8
-#define IRQ_AP_EXPINT0			9
-#define IRQ_AP_EXPINT1			10
-#define IRQ_AP_EXPINT2			11
-#define IRQ_AP_EXPINT3			12
-#define IRQ_AP_PCIINT0			13
-#define IRQ_AP_PCIINT1			14
-#define IRQ_AP_PCIINT2			15
-#define IRQ_AP_PCIINT3			16
-#define IRQ_AP_V3INT			17
-#define IRQ_AP_CPINT0			18
-#define IRQ_AP_CPINT1			19
-#define IRQ_AP_LBUSTIMEOUT 		20
-#define IRQ_AP_APCINT			21
-#define IRQ_CP_CLCDCINT			22
-#define IRQ_CP_MMCIINT0			23
-#define IRQ_CP_MMCIINT1			24
-#define IRQ_CP_AACIINT			25
-#define IRQ_CP_CPPLDINT			26
-#define IRQ_CP_ETHINT			27
-#define IRQ_CP_TSPENINT			28
-#define IRQ_PIC_END			31
-
-#define IRQ_CIC_START			32
-#define IRQ_CM_SOFTINT			32
-#define IRQ_CM_COMMRX			33
-#define IRQ_CM_COMMTX			34
-#define IRQ_CIC_END			34
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START			35
-#define IRQ_SIC_CP_SOFTINT		35
-#define IRQ_SIC_CP_RI0			36
-#define IRQ_SIC_CP_RI1			37
-#define IRQ_SIC_CP_CARDIN		38
-#define IRQ_SIC_CP_LMINT0		39
-#define IRQ_SIC_CP_LMINT1		40
-#define IRQ_SIC_CP_LMINT2		41
-#define IRQ_SIC_CP_LMINT3		42
-#define IRQ_SIC_CP_LMINT4		43
-#define IRQ_SIC_CP_LMINT5		44
-#define IRQ_SIC_CP_LMINT6		45
-#define IRQ_SIC_CP_LMINT7		46
-#define IRQ_SIC_END			46
-
-#define NR_IRQS                         47
-
diff --git a/include/asm-arm/arch-integrator/lm.h b/include/asm-arm/arch-integrator/lm.h
deleted file mode 100644
index 28186b6f2c09..000000000000
--- a/include/asm-arm/arch-integrator/lm.h
+++ /dev/null
@@ -1,23 +0,0 @@
-
-struct lm_device {
-	struct device		dev;
-	struct resource		resource;
-	unsigned int		irq;
-	unsigned int		id;
-};
-
-struct lm_driver {
-	struct device_driver	drv;
-	int			(*probe)(struct lm_device *);
-	void			(*remove)(struct lm_device *);
-	int			(*suspend)(struct lm_device *, pm_message_t);
-	int			(*resume)(struct lm_device *);
-};
-
-int lm_driver_register(struct lm_driver *drv);
-void lm_driver_unregister(struct lm_driver *drv);
-
-int lm_device_register(struct lm_device *dev);
-
-#define lm_get_drvdata(lm)	dev_get_drvdata(&(lm)->dev)
-#define lm_set_drvdata(lm,d)	dev_set_drvdata(&(lm)->dev, d)
diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h
deleted file mode 100644
index 1ab56d783e7c..000000000000
--- a/include/asm-arm/arch-integrator/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-#define BUS_OFFSET	UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h
deleted file mode 100644
index 83c4c1ceb411..000000000000
--- a/include/asm-arm/arch-integrator/platform.h
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/**************************************************************************
- * * Copyright © ARM Limited 1998.  All rights reserved.
- * ***********************************************************************/
-/* ************************************************************************
- *
- *   Integrator address map
- *
- * 	NOTE: This is a multi-hosted header file for use with uHAL and
- * 	      supported debuggers.
- *
- * 	$Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $
- *
- * ***********************************************************************/
-
-#ifndef __address_h
-#define __address_h                     1
-
-/* ========================================================================
- *  Integrator definitions
- * ========================================================================
- * ------------------------------------------------------------------------
- *  Memory definitions
- * ------------------------------------------------------------------------
- *  Integrator memory map
- *
- */
-#define INTEGRATOR_BOOT_ROM_LO          0x00000000
-#define INTEGRATOR_BOOT_ROM_HI          0x20000000
-#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
-#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
-
-/*
- *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
- *  fitted can be found in HDR_STAT.
- *
- *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
- *  the minimum amount of SSRAM fitted on any core module.
- *
- *  New Core Modules also alias the SSRAM.
- *
- */
-#define INTEGRATOR_SSRAM_BASE           0x00000000
-#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
-#define INTEGRATOR_SSRAM_SIZE           SZ_256K
-
-#define INTEGRATOR_FLASH_BASE           0x24000000
-#define INTEGRATOR_FLASH_SIZE           SZ_32M
-
-#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
-#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
-
-/*
- *  SDRAM is a SIMM therefore the size is not known.
- *
- */
-#define INTEGRATOR_SDRAM_BASE           0x00040000
-
-#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
-#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
-#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
-#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
-#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
-
-/*
- *  Logic expansion modules
- *
- */
-#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
-#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
-#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
-
-/* ------------------------------------------------------------------------
- *  Integrator header card registers
- * ------------------------------------------------------------------------
- *
- */
-#define INTEGRATOR_HDR_ID_OFFSET        0x00
-#define INTEGRATOR_HDR_PROC_OFFSET      0x04
-#define INTEGRATOR_HDR_OSC_OFFSET       0x08
-#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
-#define INTEGRATOR_HDR_STAT_OFFSET      0x10
-#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
-#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
-#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
-#define INTEGRATOR_HDR_IC_OFFSET        0x40
-#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
-#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
-
-#define INTEGRATOR_HDR_BASE             0x10000000
-#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
-#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
-#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
-#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
-#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
-#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
-#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
-#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
-#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
-#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
-#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
-
-#define INTEGRATOR_HDR_CTRL_LED         0x01
-#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
-#define INTEGRATOR_HDR_CTRL_REMAP       0x04
-#define INTEGRATOR_HDR_CTRL_RESET       0x08
-#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
-#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
-#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
-#define INTEGRATOR_HDR_CTRL_SYNC        0x80
-
-#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
-#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
-#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
-#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
-#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
-#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
-#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
-#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
-#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
-#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
-#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
-#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
-#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
-#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
-#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
-#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
-#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
-#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
-#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
-#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
-#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
-#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
-#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
-#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
-#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
-#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
-#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
-#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
-#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
-#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
-#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
-#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
-
-#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
-#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
-#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
-#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
-#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
-#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
-#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
-#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
-#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
-#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
-#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
-
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
-
-#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
-
-
-/* ------------------------------------------------------------------------
- *  Integrator system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  System Controller
- *
- */
-#define INTEGRATOR_SC_ID_OFFSET         0x00
-#define INTEGRATOR_SC_OSC_OFFSET        0x04
-#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
-#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
-#define INTEGRATOR_SC_DEC_OFFSET        0x10
-#define INTEGRATOR_SC_ARB_OFFSET        0x14
-#define INTEGRATOR_SC_PCIENABLE_OFFSET  0x18
-#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
-
-#define INTEGRATOR_SC_BASE              0x11000000
-#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
-#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
-#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
-#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
-#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
-#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
-#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
-
-#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
-#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
-#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
-#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
-#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
-#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
-
-#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
-#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
-#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
-
-#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
-#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
-#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
-#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
-#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
-#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
-#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
-
-/*
- *  External Bus Interface
- *
- */
-#define INTEGRATOR_EBI_BASE             0x12000000
-
-#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
-#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
-#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
-#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
-#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
-
-#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
-#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
-#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
-#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
-#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-
-#define INTEGRATOR_EBI_8_BIT            0x00
-#define INTEGRATOR_EBI_16_BIT           0x01
-#define INTEGRATOR_EBI_32_BIT           0x02
-#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
-#define INTEGRATOR_EBI_SYNC             0x08
-#define INTEGRATOR_EBI_WS_2             0x00
-#define INTEGRATOR_EBI_WS_3             0x10
-#define INTEGRATOR_EBI_WS_4             0x20
-#define INTEGRATOR_EBI_WS_5             0x30
-#define INTEGRATOR_EBI_WS_6             0x40
-#define INTEGRATOR_EBI_WS_7             0x50
-#define INTEGRATOR_EBI_WS_8             0x60
-#define INTEGRATOR_EBI_WS_9             0x70
-#define INTEGRATOR_EBI_WS_10            0x80
-#define INTEGRATOR_EBI_WS_11            0x90
-#define INTEGRATOR_EBI_WS_12            0xA0
-#define INTEGRATOR_EBI_WS_13            0xB0
-#define INTEGRATOR_EBI_WS_14            0xC0
-#define INTEGRATOR_EBI_WS_15            0xD0
-#define INTEGRATOR_EBI_WS_16            0xE0
-#define INTEGRATOR_EBI_WS_17            0xF0
-
-
-#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
-#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
-#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
-#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
-#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
-#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
-#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
-
-/*
- *  LED's & Switches
- *
- */
-#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
-#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
-#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
-
-#define INTEGRATOR_DBG_BASE             0x1A000000
-#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
-#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
-#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
-
-
-#if defined(CONFIG_ARCH_INTEGRATOR_AP)
-#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
-#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
-#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
-#endif
-
-/* ------------------------------------------------------------------------
- *  KMI keyboard/mouse definitions
- * ------------------------------------------------------------------------
- */
-/* PS2 Keyboard interface */
-#define KMI0_BASE                       INTEGRATOR_KBD_BASE
-
-/* PS2 Mouse interface */
-#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
-
-/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
-
-/* ------------------------------------------------------------------------
- *  Where in the memory map does PCI live?
- * ------------------------------------------------------------------------
- *  This represents a fairly liberal usage of address space.  Even though
- *  the V3 only has two windows (therefore we need to map stuff on the fly),
- *  we maintain the same addresses, even if they're not mapped.
- *
- */
-#define PHYS_PCI_MEM_BASE               0x40000000   /* 512M to xxx */
-/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ???
- */
-#define PHYS_PCI_IO_BASE                0x60000000   /* 16M to xxx */
-/*  unused (128-16)M from B1000000-B7FFFFFF
- */
-#define PHYS_PCI_CONFIG_BASE            0x61000000   /* 16M to xxx */
-/*  unused ((128-16)M - 64K) from XXX
- */
-#define PHYS_PCI_V3_BASE                0x62000000
-
-#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
-
-/* 'export' these to UHAL */
-#define UHAL_PCI_IO                     PCI_IO_BASE
-#define UHAL_PCI_MEM                    PCI_MEM_BASE
-#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
-#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
-#define UHAL_PCI_MAX_SLOT               20
-
-/* ========================================================================
- *  Start of uHAL definitions
- * ========================================================================
- */
-
-/* ------------------------------------------------------------------------
- *  Integrator Interrupt Controllers
- * ------------------------------------------------------------------------
- *
- *  Offsets from interrupt controller base
- *
- *  System Controller interrupt controller base is
- *
- * 	INTEGRATOR_IC_BASE + (header_number << 6)
- *
- *  Core Module interrupt controller base is
- *
- * 	INTEGRATOR_HDR_IC
- *
- */
-#define IRQ_STATUS                      0
-#define IRQ_RAW_STATUS                  0x04
-#define IRQ_ENABLE                      0x08
-#define IRQ_ENABLE_SET                  0x08
-#define IRQ_ENABLE_CLEAR                0x0C
-
-#define INT_SOFT_SET                    0x10
-#define INT_SOFT_CLEAR                  0x14
-
-#define FIQ_STATUS                      0x20
-#define FIQ_RAW_STATUS                  0x24
-#define FIQ_ENABLE                      0x28
-#define FIQ_ENABLE_SET                  0x28
-#define FIQ_ENABLE_CLEAR                0x2C
-
-
-/* ------------------------------------------------------------------------
- *  Interrupts
- * ------------------------------------------------------------------------
- *
- *
- *  Each Core Module has two interrupts controllers, one on the core module
- *  itself and one in the system controller on the motherboard.  The
- *  READ_INT macro in target.s reads both interrupt controllers and returns
- *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
- *  and bits 24 to 31 are from the core module.
- *
- *  The following definitions relate to the bitmask returned by READ_INT.
- *
- */
-
-/* ------------------------------------------------------------------------
- *  LED's - The header LED is not accessible via the uHAL API
- * ------------------------------------------------------------------------
- *
- */
-#define GREEN_LED                       0x01
-#define YELLOW_LED                      0x02
-#define RED_LED                         0x04
-#define GREEN_LED_2                     0x08
-#define ALL_LEDS                        0x0F
-
-#define LED_BANK                        INTEGRATOR_DBG_LEDS
-
-/*
- *  Memory definitions - run uHAL out of SSRAM.
- *
- */
-#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
-
-/*
- *  Application Flash
- *
- */
-#define FLASH_BASE                      INTEGRATOR_FLASH_BASE
-#define FLASH_SIZE                      INTEGRATOR_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/*
- *  Boot Flash
- *
- */
-#define EPROM_BASE                      INTEGRATOR_BOOT_ROM_HI
-#define EPROM_SIZE                      INTEGRATOR_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/*
- *  Clean base - dummy
- *
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- *  Timer definitions
- *
- *  Only use timer 1 & 2
- *  (both run at 24MHz and will need the clock divider set to 16).
- *
- *  Timer 0 runs at bus frequency and therefore could vary and currently
- *  uHAL can't handle that.
- *
- */
-
-#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
-#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
-#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  24
-
-/*
- *  These are useconds NOT ticks.
- *
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define INTEGRATOR_CSR_BASE             0x10000000
-#define INTEGRATOR_CSR_SIZE             0x10000000
-
-#endif
-
-/* 	END */
diff --git a/include/asm-arm/arch-integrator/system.h b/include/asm-arm/arch-integrator/system.h
deleted file mode 100644
index 8ea442237d20..000000000000
--- a/include/asm-arm/arch-integrator/system.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/cm.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
-#endif
diff --git a/include/asm-arm/arch-integrator/timex.h b/include/asm-arm/arch-integrator/timex.h
deleted file mode 100644
index 87a762818ba2..000000000000
--- a/include/asm-arm/arch-integrator/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/timex.h
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * ??
- */
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h
deleted file mode 100644
index f61825c4d901..000000000000
--- a/include/asm-arm/arch-integrator/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/include/asm-arm/arch-integrator/vmalloc.h
deleted file mode 100644
index 170cccece523..000000000000
--- a/include/asm-arm/arch-integrator/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-integrator/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h
deleted file mode 100644
index 90d14ee564f5..000000000000
--- a/include/asm-arm/arch-iop13xx/adma.h
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * Copyright(c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _ADMA_H
-#define _ADMA_H
-#include <linux/types.h>
-#include <linux/io.h>
-#include <asm/hardware.h>
-#include <asm/hardware/iop_adma.h>
-
-#define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
-#define ADMA_ACSR(chan)	(chan->mmr_base + 0x4)
-#define ADMA_ADAR(chan)	(chan->mmr_base + 0x8)
-#define ADMA_IIPCR(chan)	(chan->mmr_base + 0x18)
-#define ADMA_IIPAR(chan)	(chan->mmr_base + 0x1c)
-#define ADMA_IIPUAR(chan)	(chan->mmr_base + 0x20)
-#define ADMA_ANDAR(chan)	(chan->mmr_base + 0x24)
-#define ADMA_ADCR(chan)	(chan->mmr_base + 0x28)
-#define ADMA_CARMD(chan)	(chan->mmr_base + 0x2c)
-#define ADMA_ABCR(chan)	(chan->mmr_base + 0x30)
-#define ADMA_DLADR(chan)	(chan->mmr_base + 0x34)
-#define ADMA_DUADR(chan)	(chan->mmr_base + 0x38)
-#define ADMA_SLAR(src, chan)	(chan->mmr_base + (0x3c + (src << 3)))
-#define ADMA_SUAR(src, chan)	(chan->mmr_base + (0x40 + (src << 3)))
-
-struct iop13xx_adma_src {
-	u32 src_addr;
-	union {
-		u32 upper_src_addr;
-		struct {
-			unsigned int pq_upper_src_addr:24;
-			unsigned int pq_dmlt:8;
-		};
-	};
-};
-
-struct iop13xx_adma_desc_ctrl {
-	unsigned int int_en:1;
-	unsigned int xfer_dir:2;
-	unsigned int src_select:4;
-	unsigned int zero_result:1;
-	unsigned int block_fill_en:1;
-	unsigned int crc_gen_en:1;
-	unsigned int crc_xfer_dis:1;
-	unsigned int crc_seed_fetch_dis:1;
-	unsigned int status_write_back_en:1;
-	unsigned int endian_swap_en:1;
-	unsigned int reserved0:2;
-	unsigned int pq_update_xfer_en:1;
-	unsigned int dual_xor_en:1;
-	unsigned int pq_xfer_en:1;
-	unsigned int p_xfer_dis:1;
-	unsigned int reserved1:10;
-	unsigned int relax_order_en:1;
-	unsigned int no_snoop_en:1;
-};
-
-struct iop13xx_adma_byte_count {
-	unsigned int byte_count:24;
-	unsigned int host_if:3;
-	unsigned int reserved:2;
-	unsigned int zero_result_err_q:1;
-	unsigned int zero_result_err:1;
-	unsigned int tx_complete:1;
-};
-
-struct iop13xx_adma_desc_hw {
-	u32 next_desc;
-	union {
-		u32 desc_ctrl;
-		struct iop13xx_adma_desc_ctrl desc_ctrl_field;
-	};
-	union {
-		u32 crc_addr;
-		u32 block_fill_data;
-		u32 q_dest_addr;
-	};
-	union {
-		u32 byte_count;
-		struct iop13xx_adma_byte_count byte_count_field;
-	};
-	union {
-		u32 dest_addr;
-		u32 p_dest_addr;
-	};
-	union {
-		u32 upper_dest_addr;
-		u32 pq_upper_dest_addr;
-	};
-	struct iop13xx_adma_src src[1];
-};
-
-struct iop13xx_adma_desc_dual_xor {
-	u32 next_desc;
-	u32 desc_ctrl;
-	u32 reserved;
-	u32 byte_count;
-	u32 h_dest_addr;
-	u32 h_upper_dest_addr;
-	u32 src0_addr;
-	u32 upper_src0_addr;
-	u32 src1_addr;
-	u32 upper_src1_addr;
-	u32 h_src_addr;
-	u32 h_upper_src_addr;
-	u32 d_src_addr;
-	u32 d_upper_src_addr;
-	u32 d_dest_addr;
-	u32 d_upper_dest_addr;
-};
-
-struct iop13xx_adma_desc_pq_update {
-	u32 next_desc;
-	u32 desc_ctrl;
-	u32 reserved;
-	u32 byte_count;
-	u32 p_dest_addr;
-	u32 p_upper_dest_addr;
-	u32 src0_addr;
-	u32 upper_src0_addr;
-	u32 src1_addr;
-	u32 upper_src1_addr;
-	u32 p_src_addr;
-	u32 p_upper_src_addr;
-	u32 q_src_addr;
-	struct {
-		unsigned int q_upper_src_addr:24;
-		unsigned int q_dmlt:8;
-	};
-	u32 q_dest_addr;
-	u32 q_upper_dest_addr;
-};
-
-static inline int iop_adma_get_max_xor(void)
-{
-	return 16;
-}
-
-static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
-{
-	return __raw_readl(ADMA_ADAR(chan));
-}
-
-static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
-						u32 next_desc_addr)
-{
-	__raw_writel(next_desc_addr, ADMA_ANDAR(chan));
-}
-
-#define ADMA_STATUS_BUSY (1 << 13)
-
-static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
-{
-	if (__raw_readl(ADMA_ACSR(chan)) &
-		ADMA_STATUS_BUSY)
-		return 1;
-	else
-		return 0;
-}
-
-static inline int
-iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
-{
-	return 1;
-}
-#define iop_desc_is_aligned(x, y) 1
-
-static inline int
-iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
-
-static inline int
-iop_chan_memset_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-static inline int
-iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
-{
-	int num_slots;
-	/* slots_to_find = 1 for basic descriptor + 1 per 4 sources above 1
-	 * (1 source => 8 bytes) (1 slot => 32 bytes)
-	 */
-	num_slots = 1 + (((src_cnt - 1) << 3) >> 5);
-	if (((src_cnt - 1) << 3) & 0x1f)
-		num_slots++;
-
-	*slots_per_op = num_slots;
-
-	return num_slots;
-}
-
-#define ADMA_MAX_BYTE_COUNT	(16 * 1024 * 1024)
-#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
-
-static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->dest_addr;
-}
-
-static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->byte_count_field.byte_count;
-}
-
-static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					int src_idx)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->src[src_idx].src_addr;
-}
-
-static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->desc_ctrl_field.src_select + 1;
-}
-
-static inline void
-iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-}
-
-static inline void
-iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.block_fill_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-}
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline void
-iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
-		  unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-
-}
-#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline int
-iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
-		       unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.zero_result = 1;
-	u_desc_ctrl.field.status_write_back_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-
-	return 1;
-}
-
-static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					u32 byte_count)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->byte_count = byte_count;
-}
-
-static inline void
-iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
-	int slots_per_op = desc->slots_per_op;
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		hw_desc->byte_count = len;
-	} else {
-		do {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			i += slots_per_op;
-		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
-
-		if (len) {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = len;
-		}
-	}
-}
-
-
-static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					dma_addr_t addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->dest_addr = addr;
-	hw_desc->upper_dest_addr = 0;
-}
-
-static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
-					dma_addr_t addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->src[0].src_addr = addr;
-	hw_desc->src[0].upper_src_addr = 0;
-}
-
-static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
-					int src_idx, dma_addr_t addr)
-{
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	do {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iter->src[src_idx].src_addr = addr;
-		iter->src[src_idx].upper_src_addr = 0;
-		slot_cnt -= slots_per_op;
-		if (slot_cnt) {
-			i += slots_per_op;
-			addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
-		}
-	} while (slot_cnt);
-}
-
-static inline void
-iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
-	struct iop_adma_chan *chan)
-{
-	iop_desc_init_memcpy(desc, 1);
-	iop_desc_set_byte_count(desc, chan, 0);
-	iop_desc_set_dest_addr(desc, chan, 0);
-	iop_desc_set_memcpy_src_addr(desc, 0);
-}
-
-#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
-
-static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
-					u32 next_desc_addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	BUG_ON(hw_desc->next_desc);
-	hw_desc->next_desc = next_desc_addr;
-}
-
-static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->next_desc;
-}
-
-static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->next_desc = 0;
-}
-
-static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
-						u32 val)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->block_fill_data = val;
-}
-
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
-	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
-
-	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
-
-	if (desc_ctrl.pq_xfer_en)
-		return byte_count.zero_result_err_q;
-	else
-		return byte_count.zero_result_err;
-}
-
-static inline void iop_chan_append(struct iop_adma_chan *chan)
-{
-	u32 adma_accr;
-
-	adma_accr = __raw_readl(ADMA_ACCR(chan));
-	adma_accr |= 0x2;
-	__raw_writel(adma_accr, ADMA_ACCR(chan));
-}
-
-static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
-{
-	return __raw_readl(ADMA_ACSR(chan));
-}
-
-static inline void iop_chan_disable(struct iop_adma_chan *chan)
-{
-	u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
-	adma_chan_ctrl &= ~0x1;
-	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_chan_enable(struct iop_adma_chan *chan)
-{
-	u32 adma_chan_ctrl;
-
-	adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
-	adma_chan_ctrl |= 0x1;
-	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 12);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 11);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline int
-iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(9, &status);
-}
-
-static inline int
-iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(5, &status);
-}
-
-static inline int
-iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(4, &status);
-}
-
-static inline int
-iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(3, &status);
-}
-
-static inline int
-iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-#endif /* _ADMA_H */
diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S
deleted file mode 100644
index 788b4e386c16..000000000000
--- a/include/asm-arm/arch-iop13xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop13xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-	.macro	addruart, rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ mmu enabled?
-	moveq	\rx, #0xff000000	@ physical
-	orreq	\rx, \rx, #0x00d80000
-	movne	\rx, #0xfe000000	@ virtual
-	orrne	\rx, \rx, #0x00e80000
-	orr	\rx, \rx, #0x00002300
-	orr	\rx, \rx, #0x00000040
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h
deleted file mode 100644
index d79846fbb394..000000000000
--- a/include/asm-arm/arch-iop13xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#ifndef _IOP13XX_DMA_H
-#define _IOP13XX_DMA_H
-#endif
diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/include/asm-arm/arch-iop13xx/entry-macro.S
deleted file mode 100644
index a624a7870c64..000000000000
--- a/include/asm-arm/arch-iop13xx/entry-macro.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * iop13xx low level irq macros
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-	.macro  disable_fiq
-	.endm
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	.endm
-
-	/*
-	 * Note: a 1-cycle window exists where iintvec will return the value
-	 * of iintbase, so we explicitly check for "bad zeros"
-	 */
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc	p6, 0, \irqnr, c3, c2, 0  	@ Read IINTVEC
-	cmp	\irqnr, #0
-	mrceq	p6, 0, \irqnr, c3, c2, 0  	@ Re-read on potentially bad zero
-	adds	\irqstat, \irqnr, #1	  	@ Check for 0xffffffff
-	movne	\irqnr, \irqnr, lsr #2	  	@ Convert to irqnr
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/include/asm-arm/arch-iop13xx/hardware.h
deleted file mode 100644
index 8e1d56289846..000000000000
--- a/include/asm-arm/arch-iop13xx/hardware.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-#include <asm/types.h>
-
-#define pcibios_assign_all_busses() 1
-
-#ifndef __ASSEMBLY__
-extern unsigned long iop13xx_pcibios_min_io;
-extern unsigned long iop13xx_pcibios_min_mem;
-extern u16 iop13xx_dev_id(void);
-extern void iop13xx_set_atu_mmr_bases(void);
-#endif
-
-#define PCIBIOS_MIN_IO      (iop13xx_pcibios_min_io)
-#define PCIBIOS_MIN_MEM     (iop13xx_pcibios_min_mem)
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop13xx.h"
-
-/*
- * Board specific bits
- */
-#include "iq81340.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h
deleted file mode 100644
index a6e0f9e6ddcf..000000000000
--- a/include/asm-arm/arch-iop13xx/io.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __iop13xx_io(a)
-#define __mem_pci(a) (a)
-#define __mem_isa(a) (a)
-
-extern void __iomem * __iop13xx_io(unsigned long io_addr);
-extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop13xx_iounmap(void __iomem *addr);
-
-extern u32 iop13xx_atue_mem_base;
-extern u32 iop13xx_atux_mem_base;
-extern size_t iop13xx_atue_mem_size;
-extern size_t iop13xx_atux_mem_size;
-
-#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop13xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
deleted file mode 100644
index 52b7fab7ef60..000000000000
--- a/include/asm-arm/arch-iop13xx/iop13xx.h
+++ /dev/null
@@ -1,526 +0,0 @@
-#ifndef _IOP13XX_HW_H_
-#define _IOP13XX_HW_H_
-
-#ifndef __ASSEMBLY__
-/* The ATU offsets can change based on the strapping */
-extern u32 iop13xx_atux_pmmr_offset;
-extern u32 iop13xx_atue_pmmr_offset;
-void iop13xx_init_irq(void);
-void iop13xx_map_io(void);
-void iop13xx_platform_init(void);
-void iop13xx_add_tpmi_devices(void);
-void iop13xx_init_irq(void);
-
-/* CPUID CP6 R0 Page 0 */
-static inline int iop13xx_cpu_id(void)
-{
-	int id;
-	asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
-	return id;
-}
-
-/* WDTCR CP6 R7 Page 9 */
-static inline u32 read_wdtcr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtcr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
-}
-
-/* WDTSR CP6 R8 Page 9 */
-static inline u32 read_wdtsr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtsr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
-}
-
-/* RCSR - Reset Cause Status Register  */
-static inline u32 read_rcsr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val));
-	return val;
-}
-
-extern unsigned long get_iop_tick_rate(void);
-#endif
-
-/*
- * IOP13XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP13XX_MAX_RAM_SIZE    0x80000000UL  /* 2GB */
-#define IOP13XX_PCI_OFFSET	 IOP13XX_MAX_RAM_SIZE
-
-/* PCI MAP
- * bus range		cpu phys	cpu virt	note
- * 0x0000.0000 + 2GB	(n/a)		(n/a)		inbound, 1:1 mapping with Physical RAM
- * 0x8000.0000 + 928M	0x1.8000.0000   (ioremap)	PCIX outbound memory window
- * 0x8000.0000 + 928M	0x2.8000.0000   (ioremap)	PCIE outbound memory window
- *
- * IO MAP
- * 0x1000 + 64K	0x0.fffb.1000	0xfec6.1000	PCIX outbound i/o window
- * 0x1000 + 64K	0x0.fffd.1000	0xfed7.1000	PCIE outbound i/o window
- */
-#define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
-#define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
-#define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
-#define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
-#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
-#define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIX_LOWER_IO_PA\
-					   - IOP13XX_PCIX_LOWER_IO_VA))
-
-#define IOP13XX_PCIX_MEM_PHYS_OFFSET  0x100000000ULL
-#define IOP13XX_PCIX_MEM_WINDOW_SIZE  0x3a000000UL
-#define IOP13XX_PCIX_LOWER_MEM_BA     (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
-#define IOP13XX_PCIX_LOWER_MEM_PA     (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
-				       IOP13XX_PCIX_LOWER_MEM_BA)
-#define IOP13XX_PCIX_UPPER_MEM_PA     (IOP13XX_PCIX_LOWER_MEM_PA +\
-				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_MEM_BA     (IOP13XX_PCIX_LOWER_MEM_BA +\
-				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-
-#define IOP13XX_PCIX_MEM_COOKIE        0x80000000UL
-#define IOP13XX_PCIX_LOWER_MEM_RA      IOP13XX_PCIX_MEM_COOKIE
-#define IOP13XX_PCIX_UPPER_MEM_RA      (IOP13XX_PCIX_LOWER_MEM_RA +\
-					IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_MEM_OFFSET        (IOP13XX_PCIX_MEM_COOKIE -\
-					IOP13XX_PCIX_LOWER_MEM_BA)
-
-/* PCI-E ranges */
-#define IOP13XX_PCIE_IO_WINDOW_SIZE   	 0x10000UL
-#define IOP13XX_PCIE_LOWER_IO_PA      	 0xfffd0000UL
-#define IOP13XX_PCIE_LOWER_IO_VA      	 0xfed70000UL
-#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0UL  /* OIOTVR */
-#define IOP13XX_PCIE_IO_BUS_OFFSET	 0x1000UL
-#define IOP13XX_PCIE_UPPER_IO_PA      	 (IOP13XX_PCIE_LOWER_IO_PA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_VA      	 (IOP13XX_PCIE_LOWER_IO_VA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_BA      	 (IOP13XX_PCIE_LOWER_IO_BA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIE_LOWER_IO_PA\
-					   - IOP13XX_PCIE_LOWER_IO_VA))
-
-#define IOP13XX_PCIE_MEM_PHYS_OFFSET  	 0x200000000ULL
-#define IOP13XX_PCIE_MEM_WINDOW_SIZE  	 0x3a000000UL
-#define IOP13XX_PCIE_LOWER_MEM_BA     	 (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
-#define IOP13XX_PCIE_LOWER_MEM_PA     	 (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
-					 IOP13XX_PCIE_LOWER_MEM_BA)
-#define IOP13XX_PCIE_UPPER_MEM_PA     	 (IOP13XX_PCIE_LOWER_MEM_PA +\
-					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_MEM_BA     	 (IOP13XX_PCIE_LOWER_MEM_BA +\
-					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-
-/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
-#define IOP13XX_PCIE_MEM_COOKIE       	 0xc0000000UL
-#define IOP13XX_PCIE_LOWER_MEM_RA     	 IOP13XX_PCIE_MEM_COOKIE
-#define IOP13XX_PCIE_UPPER_MEM_RA     	 (IOP13XX_PCIE_LOWER_MEM_RA +\
-					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_MEM_OFFSET       	 (IOP13XX_PCIE_MEM_COOKIE -\
-					 IOP13XX_PCIE_LOWER_MEM_BA)
-
-/* PBI Ranges */
-#define IOP13XX_PBI_LOWER_MEM_PA	  0xf0000000UL
-#define IOP13XX_PBI_MEM_WINDOW_SIZE	  0x04000000UL
-#define IOP13XX_PBI_MEM_COOKIE		  0xfa000000UL
-#define IOP13XX_PBI_LOWER_MEM_RA	  IOP13XX_PBI_MEM_COOKIE
-#define IOP13XX_PBI_UPPER_MEM_RA	  (IOP13XX_PBI_LOWER_MEM_RA +\
-					  IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
-
-/*
- * IOP13XX chipset registers
- */
-#define IOP13XX_PMMR_PHYS_MEM_BASE	   0xffd80000UL  /* PMMR phys. address */
-#define IOP13XX_PMMR_VIRT_MEM_BASE	   0xfee80000UL  /* PMMR phys. address */
-#define IOP13XX_PMMR_MEM_WINDOW_SIZE	   0x80000
-#define IOP13XX_PMMR_UPPER_MEM_VA	   (IOP13XX_PMMR_VIRT_MEM_BASE +\
-					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_UPPER_MEM_PA	   (IOP13XX_PMMR_PHYS_MEM_BASE +\
-					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (u32) ((u32) addr +\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
-#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (u32) ((u32) addr -\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
-#define IOP13XX_REG_ADDR32(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR16(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR8(reg)      	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR32_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR16_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR8_PHYS(reg)       (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_PMMR_SIZE		   0x00080000
-
-/*=================== Defines for Platform Devices =====================*/
-#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
-#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
-
-#define IOP13XX_I2C0_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
-#define IOP13XX_I2C1_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
-#define IOP13XX_I2C2_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
-#define IOP13XX_I2C0_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
-#define IOP13XX_I2C1_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
-#define IOP13XX_I2C2_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
-
-/* ATU selection flags */
-/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
-#define IOP13XX_INIT_ATU_DEFAULT     (0)
-#define IOP13XX_INIT_ATU_ATUX	      (1 << 0)
-#define IOP13XX_INIT_ATU_ATUE	      (1 << 1)
-#define IOP13XX_INIT_ATU_NONE	      (1 << 2)
-
-/* UART selection flags */
-/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
-#define IOP13XX_INIT_UART_DEFAULT    (0)
-#define IOP13XX_INIT_UART_0	      (1 << 0)
-#define IOP13XX_INIT_UART_1	      (1 << 1)
-
-/* I2C selection flags */
-/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
-#define IOP13XX_INIT_I2C_DEFAULT     (0)
-#define IOP13XX_INIT_I2C_0	      (1 << 0)
-#define IOP13XX_INIT_I2C_1	      (1 << 1)
-#define IOP13XX_INIT_I2C_2	      (1 << 2)
-
-/* ADMA selection flags */
-/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */
-#define IOP13XX_INIT_ADMA_DEFAULT     (0)
-#define IOP13XX_INIT_ADMA_0           (1 << 0)
-#define IOP13XX_INIT_ADMA_1           (1 << 1)
-#define IOP13XX_INIT_ADMA_2           (1 << 2)
-
-/* Platform devices */
-#define IQ81340_NUM_UART     		2
-#define IQ81340_NUM_I2C      		3
-#define IQ81340_NUM_PHYS_MAP_FLASH	1
-#define IQ81340_NUM_ADMA     		3
-#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \
-				IQ81340_NUM_I2C + \
-				IQ81340_NUM_PHYS_MAP_FLASH + \
-				IQ81340_NUM_ADMA)
-
-/*========================== PMMR offsets for key registers ============*/
-#define IOP13XX_ATU0_PMMR_OFFSET   	0x00048000
-#define IOP13XX_ATU1_PMMR_OFFSET   	0x0004c000
-#define IOP13XX_ATU2_PMMR_OFFSET   	0x0004d000
-#define IOP13XX_ADMA0_PMMR_OFFSET  	0x00000000
-#define IOP13XX_ADMA1_PMMR_OFFSET  	0x00000200
-#define IOP13XX_ADMA2_PMMR_OFFSET  	0x00000400
-#define IOP13XX_PBI_PMMR_OFFSET    	0x00001580
-#define IOP13XX_MU_PMMR_OFFSET		0x00004000
-#define IOP13XX_ESSR0_PMMR_OFFSET  	0x00002188
-#define IOP13XX_ESSR0			IOP13XX_REG_ADDR32(0x00002188)
-
-#define IOP13XX_ESSR0_IFACE_MASK   	0x00004000  /* Interface PCI-X / PCI-E */
-#define IOP13XX_CONTROLLER_ONLY    	(1 << 14)
-#define IOP13XX_INTERFACE_SEL_PCIX 	(1 << 15)
-
-#define IOP13XX_PMON_PMMR_OFFSET	0x0001A000
-#define IOP13XX_PMON_BASE		(IOP13XX_PMMR_VIRT_MEM_BASE +\
-					IOP13XX_PMON_PMMR_OFFSET)
-#define IOP13XX_PMON_PHYSBASE		(IOP13XX_PMMR_PHYS_MEM_BASE +\
-					IOP13XX_PMON_PMMR_OFFSET)
-
-#define IOP13XX_PMON_CMD0		(IOP13XX_PMON_BASE + 0x0)
-#define IOP13XX_PMON_EVR0		(IOP13XX_PMON_BASE + 0x4)
-#define IOP13XX_PMON_STS0		(IOP13XX_PMON_BASE + 0x8)
-#define IOP13XX_PMON_DATA0		(IOP13XX_PMON_BASE + 0xC)
-
-#define IOP13XX_PMON_CMD3		(IOP13XX_PMON_BASE + 0x30)
-#define IOP13XX_PMON_EVR3		(IOP13XX_PMON_BASE + 0x34)
-#define IOP13XX_PMON_STS3		(IOP13XX_PMON_BASE + 0x38)
-#define IOP13XX_PMON_DATA3		(IOP13XX_PMON_BASE + 0x3C)
-
-#define IOP13XX_PMON_CMD7		(IOP13XX_PMON_BASE + 0x70)
-#define IOP13XX_PMON_EVR7		(IOP13XX_PMON_BASE + 0x74)
-#define IOP13XX_PMON_STS7		(IOP13XX_PMON_BASE + 0x78)
-#define IOP13XX_PMON_DATA7		(IOP13XX_PMON_BASE + 0x7C)
-
-#define IOP13XX_PMONEN			(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
-#define IOP13XX_PMONSTAT		(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
-
-/*================================ATU===================================*/
-#define IOP13XX_ATUX_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
-					iop13xx_atux_pmmr_offset + (ofs))
-
-#define IOP13XX_ATUX_DID		IOP13XX_REG_ADDR16(\
-					iop13xx_atux_pmmr_offset + 0x2)
-
-#define IOP13XX_ATUX_ATUCMD		IOP13XX_REG_ADDR16(\
-					iop13xx_atux_pmmr_offset + 0x4)
-#define IOP13XX_ATUX_ATUSR		IOP13XX_REG_ADDR16(\
-					iop13xx_atux_pmmr_offset + 0x6)
-
-#define IOP13XX_ATUX_IABAR0   		IOP13XX_ATUX_OFFSET(0x10)
-#define IOP13XX_ATUX_IAUBAR0  		IOP13XX_ATUX_OFFSET(0x14)
-#define IOP13XX_ATUX_IABAR1   		IOP13XX_ATUX_OFFSET(0x18)
-#define IOP13XX_ATUX_IAUBAR1  		IOP13XX_ATUX_OFFSET(0x1c)
-#define IOP13XX_ATUX_IABAR2   		IOP13XX_ATUX_OFFSET(0x20)
-#define IOP13XX_ATUX_IAUBAR2  		IOP13XX_ATUX_OFFSET(0x24)
-#define IOP13XX_ATUX_IALR0    		IOP13XX_ATUX_OFFSET(0x40)
-#define IOP13XX_ATUX_IATVR0   		IOP13XX_ATUX_OFFSET(0x44)
-#define IOP13XX_ATUX_IAUTVR0  		IOP13XX_ATUX_OFFSET(0x48)
-#define IOP13XX_ATUX_IALR1    		IOP13XX_ATUX_OFFSET(0x4c)
-#define IOP13XX_ATUX_IATVR1   		IOP13XX_ATUX_OFFSET(0x50)
-#define IOP13XX_ATUX_IAUTVR1  		IOP13XX_ATUX_OFFSET(0x54)
-#define IOP13XX_ATUX_IALR2    		IOP13XX_ATUX_OFFSET(0x58)
-#define IOP13XX_ATUX_IATVR2   		IOP13XX_ATUX_OFFSET(0x5c)
-#define IOP13XX_ATUX_IAUTVR2  		IOP13XX_ATUX_OFFSET(0x60)
-#define IOP13XX_ATUX_ATUCR    		IOP13XX_ATUX_OFFSET(0x70)
-#define IOP13XX_ATUX_PCSR     		IOP13XX_ATUX_OFFSET(0x74)
-#define IOP13XX_ATUX_ATUISR   		IOP13XX_ATUX_OFFSET(0x78)
-#define IOP13XX_ATUX_PCIXSR   		IOP13XX_ATUX_OFFSET(0xD4)
-#define IOP13XX_ATUX_IABAR3   		IOP13XX_ATUX_OFFSET(0x200)
-#define IOP13XX_ATUX_IAUBAR3  		IOP13XX_ATUX_OFFSET(0x204)
-#define IOP13XX_ATUX_IALR3    		IOP13XX_ATUX_OFFSET(0x208)
-#define IOP13XX_ATUX_IATVR3   		IOP13XX_ATUX_OFFSET(0x20c)
-#define IOP13XX_ATUX_IAUTVR3  		IOP13XX_ATUX_OFFSET(0x210)
-
-#define IOP13XX_ATUX_OIOBAR   		IOP13XX_ATUX_OFFSET(0x300)
-#define IOP13XX_ATUX_OIOWTVR  		IOP13XX_ATUX_OFFSET(0x304)
-#define IOP13XX_ATUX_OUMBAR0  		IOP13XX_ATUX_OFFSET(0x308)
-#define IOP13XX_ATUX_OUMWTVR0 		IOP13XX_ATUX_OFFSET(0x30c)
-#define IOP13XX_ATUX_OUMBAR1  		IOP13XX_ATUX_OFFSET(0x310)
-#define IOP13XX_ATUX_OUMWTVR1 		IOP13XX_ATUX_OFFSET(0x314)
-#define IOP13XX_ATUX_OUMBAR2  		IOP13XX_ATUX_OFFSET(0x318)
-#define IOP13XX_ATUX_OUMWTVR2 		IOP13XX_ATUX_OFFSET(0x31c)
-#define IOP13XX_ATUX_OUMBAR3  		IOP13XX_ATUX_OFFSET(0x320)
-#define IOP13XX_ATUX_OUMWTVR3 		IOP13XX_ATUX_OFFSET(0x324)
-#define IOP13XX_ATUX_OUDMABAR 		IOP13XX_ATUX_OFFSET(0x328)
-#define IOP13XX_ATUX_OUMSIBAR 		IOP13XX_ATUX_OFFSET(0x32c)
-#define IOP13XX_ATUX_OCCAR    		IOP13XX_ATUX_OFFSET(0x330)
-#define IOP13XX_ATUX_OCCDR    		IOP13XX_ATUX_OFFSET(0x334)
-
-#define IOP13XX_ATUX_ATUCR_OUT_EN		(1 << 1)
-#define IOP13XX_ATUX_PCSR_CENTRAL_RES		(1 << 25)
-#define IOP13XX_ATUX_PCSR_P_RSTOUT		(1 << 21)
-#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY		(1 << 15)
-#define IOP13XX_ATUX_PCSR_IN_Q_BUSY		(1 << 14)
-#define IOP13XX_ATUX_PCSR_FREQ_OFFSET		(16)
-
-#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR	(1 << 18)
-#define IOP13XX_ATUX_STAT_VPD_ADDR		(1 << 17)
-#define IOP13XX_ATUX_STAT_INT_PAR_ERR		(1 << 16)
-#define IOP13XX_ATUX_STAT_CFG_WRITE		(1 << 15)
-#define IOP13XX_ATUX_STAT_ERR_COR		(1 << 14)
-#define IOP13XX_ATUX_STAT_TX_SCEM		(1 << 13)
-#define IOP13XX_ATUX_STAT_REC_SCEM		(1 << 12)
-#define IOP13XX_ATUX_STAT_POWER_TRAN	 	(1 << 11)
-#define IOP13XX_ATUX_STAT_TX_SERR		(1 << 10)
-#define IOP13XX_ATUX_STAT_DET_PAR_ERR	 	(1 << 9	)
-#define IOP13XX_ATUX_STAT_BIST			(1 << 8	)
-#define IOP13XX_ATUX_STAT_INT_REC_MABORT 	(1 << 7	)
-#define IOP13XX_ATUX_STAT_REC_SERR		(1 << 4	)
-#define IOP13XX_ATUX_STAT_EXT_REC_MABORT 	(1 << 3	)
-#define IOP13XX_ATUX_STAT_EXT_REC_TABORT 	(1 << 2	)
-#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT 	(1 << 1	)
-#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR	(1 << 0	)
-
-#define IOP13XX_ATUX_PCIXSR_BUS_NUM	(8)
-#define IOP13XX_ATUX_PCIXSR_DEV_NUM	(3)
-#define IOP13XX_ATUX_PCIXSR_FUNC_NUM	(0)
-
-#define IOP13XX_ATUX_IALR_DISABLE  	0x00000001
-#define IOP13XX_ATUX_OUMBAR_ENABLE 	0x80000000
-
-#define IOP13XX_ATUE_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
-					iop13xx_atue_pmmr_offset + (ofs))
-
-#define IOP13XX_ATUE_DID		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0x2)
-#define IOP13XX_ATUE_ATUCMD		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0x4)
-#define IOP13XX_ATUE_ATUSR		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0x6)
-
-#define IOP13XX_ATUE_IABAR0		IOP13XX_ATUE_OFFSET(0x10)
-#define IOP13XX_ATUE_IAUBAR0		IOP13XX_ATUE_OFFSET(0x14)
-#define IOP13XX_ATUE_IABAR1		IOP13XX_ATUE_OFFSET(0x18)
-#define IOP13XX_ATUE_IAUBAR1		IOP13XX_ATUE_OFFSET(0x1c)
-#define IOP13XX_ATUE_IABAR2		IOP13XX_ATUE_OFFSET(0x20)
-#define IOP13XX_ATUE_IAUBAR2		IOP13XX_ATUE_OFFSET(0x24)
-#define IOP13XX_ATUE_IALR0		IOP13XX_ATUE_OFFSET(0x40)
-#define IOP13XX_ATUE_IATVR0		IOP13XX_ATUE_OFFSET(0x44)
-#define IOP13XX_ATUE_IAUTVR0		IOP13XX_ATUE_OFFSET(0x48)
-#define IOP13XX_ATUE_IALR1		IOP13XX_ATUE_OFFSET(0x4c)
-#define IOP13XX_ATUE_IATVR1		IOP13XX_ATUE_OFFSET(0x50)
-#define IOP13XX_ATUE_IAUTVR1		IOP13XX_ATUE_OFFSET(0x54)
-#define IOP13XX_ATUE_IALR2		IOP13XX_ATUE_OFFSET(0x58)
-#define IOP13XX_ATUE_IATVR2		IOP13XX_ATUE_OFFSET(0x5c)
-#define IOP13XX_ATUE_IAUTVR2		IOP13XX_ATUE_OFFSET(0x60)
-#define IOP13XX_ATUE_PE_LSTS		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0xe2)
-#define IOP13XX_ATUE_OIOWTVR		IOP13XX_ATUE_OFFSET(0x304)
-#define IOP13XX_ATUE_OUMBAR0		IOP13XX_ATUE_OFFSET(0x308)
-#define IOP13XX_ATUE_OUMWTVR0		IOP13XX_ATUE_OFFSET(0x30c)
-#define IOP13XX_ATUE_OUMBAR1		IOP13XX_ATUE_OFFSET(0x310)
-#define IOP13XX_ATUE_OUMWTVR1		IOP13XX_ATUE_OFFSET(0x314)
-#define IOP13XX_ATUE_OUMBAR2		IOP13XX_ATUE_OFFSET(0x318)
-#define IOP13XX_ATUE_OUMWTVR2		IOP13XX_ATUE_OFFSET(0x31c)
-#define IOP13XX_ATUE_OUMBAR3		IOP13XX_ATUE_OFFSET(0x320)
-#define IOP13XX_ATUE_OUMWTVR3		IOP13XX_ATUE_OFFSET(0x324)
-
-#define IOP13XX_ATUE_ATUCR		IOP13XX_ATUE_OFFSET(0x70)
-#define IOP13XX_ATUE_PCSR		IOP13XX_ATUE_OFFSET(0x74)
-#define IOP13XX_ATUE_ATUISR		IOP13XX_ATUE_OFFSET(0x78)
-#define IOP13XX_ATUE_OIOBAR		IOP13XX_ATUE_OFFSET(0x300)
-#define IOP13XX_ATUE_OCCAR		IOP13XX_ATUE_OFFSET(0x32c)
-#define IOP13XX_ATUE_OCCDR		IOP13XX_ATUE_OFFSET(0x330)
-
-#define IOP13XX_ATUE_PIE_STS		IOP13XX_ATUE_OFFSET(0x384)
-#define IOP13XX_ATUE_PIE_MSK		IOP13XX_ATUE_OFFSET(0x388)
-
-#define IOP13XX_ATUE_ATUCR_IVM		(1 << 6)
-#define IOP13XX_ATUE_ATUCR_OUT_EN	(1 << 1)
-#define IOP13XX_ATUE_OCCAR_BUS_NUM	(24)
-#define IOP13XX_ATUE_OCCAR_DEV_NUM	(19)
-#define IOP13XX_ATUE_OCCAR_FUNC_NUM	(16)
-#define IOP13XX_ATUE_OCCAR_EXT_REG	(8)
-#define IOP13XX_ATUE_OCCAR_REG		(2)
-
-#define IOP13XX_ATUE_PCSR_BUS_NUM	(24)
-#define IOP13XX_ATUE_PCSR_DEV_NUM	(19)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM	(16)
-#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY	(1 << 15)
-#define IOP13XX_ATUE_PCSR_IN_Q_BUSY	(1 << 14)
-#define IOP13XX_ATUE_PCSR_END_POINT	(1 << 13)
-#define IOP13XX_ATUE_PCSR_LLRB_BUSY	(1 << 12)
-
-#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK		(0xff)
-#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK		(0x1f)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK	(0x7)
-
-#define IOP13XX_ATUE_PCSR_CORE_RESET		(8)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM		(16)
-
-#define IOP13XX_ATUE_LSTS_TRAINING		(1 << 11)
-#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG		(1 << 28)
-#define IOP13XX_ATUE_STAT_PME			(1 << 27)
-#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG		(1 << 26)
-#define IOP13XX_ATUE_STAT_IVM			(1 << 25)
-#define IOP13XX_ATUE_STAT_BIST			(1 << 24)
-#define IOP13XX_ATUE_STAT_CFG_WRITE		(1 << 18)
-#define IOP13XX_ATUE_STAT_VPD_ADDR		(1 << 17)
-#define IOP13XX_ATUE_STAT_POWER_TRAN		(1 << 16)
-#define IOP13XX_ATUE_STAT_HALT_ON_ERROR	(1 << 13)
-#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR		(1 << 12)
-#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG		(1 << 11)
-#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR	(1 << 10)
-#define IOP13XX_ATUE_STAT_ERR_COR		(1 << 9	)
-#define IOP13XX_ATUE_STAT_ERR_UNCOR		(1 << 8	)
-#define IOP13XX_ATUE_STAT_CRS			(1 << 7	)
-#define IOP13XX_ATUE_STAT_LNK_DWN		(1 << 6	)
-#define IOP13XX_ATUE_STAT_INT_REC_MABORT	(1 << 5	)
-#define IOP13XX_ATUE_STAT_DET_PAR_ERR		(1 << 4	)
-#define IOP13XX_ATUE_STAT_EXT_REC_MABORT	(1 << 3	)
-#define IOP13XX_ATUE_STAT_SIG_TABORT		(1 << 2	)
-#define IOP13XX_ATUE_STAT_EXT_REC_TABORT	(1 << 1	)
-#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR	(1 << 0	)
-
-#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ	(1 << 31)
-#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT		(1 << 30)
-#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP		(1 << 29)
-#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR			(1 << 28)
-#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ		(1 << 20)
-#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR		(1 << 19)
-#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP		(1 << 18)
-#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW	(1 << 17)
-#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP		(1 << 16)
-#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT		(1 << 15)
-#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT		(1 << 14)
-#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR		(1 << 13)
-#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP		(1 << 12)
-#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR		(1 << 4	)
-#define IOP13XX_ATUE_ESTAT_TRAINING_ERR		(1 << 0	)
-
-#define IOP13XX_ATUE_IALR_DISABLE   		(0x00000001)
-#define IOP13XX_ATUE_OUMBAR_ENABLE  		(0x80000000)
-#define IOP13XX_ATU_OUMBAR_FUNC_NUM  		(28)
-#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK  	(0x7)
-/*=======================================================================*/
-
-/*============================MESSAGING UNIT=============================*/
-#define IOP13XX_MU_OFFSET(ofs)	IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
-							(ofs))
-
-#define IOP13XX_MU_IMR0	IOP13XX_MU_OFFSET(0x10)
-#define IOP13XX_MU_IMR1	IOP13XX_MU_OFFSET(0x14)
-#define IOP13XX_MU_OMR0	IOP13XX_MU_OFFSET(0x18)
-#define IOP13XX_MU_OMR1	IOP13XX_MU_OFFSET(0x1C)
-#define IOP13XX_MU_IDR	       	IOP13XX_MU_OFFSET(0x20)
-#define IOP13XX_MU_IISR	IOP13XX_MU_OFFSET(0x24)
-#define IOP13XX_MU_IIMR	IOP13XX_MU_OFFSET(0x28)
-#define IOP13XX_MU_ODR	       	IOP13XX_MU_OFFSET(0x2C)
-#define IOP13XX_MU_OISR	IOP13XX_MU_OFFSET(0x30)
-#define IOP13XX_MU_OIMR	IOP13XX_MU_OFFSET(0x34)
-#define IOP13XX_MU_IRCSR      	IOP13XX_MU_OFFSET(0x38)
-#define IOP13XX_MU_ORCSR      	IOP13XX_MU_OFFSET(0x3C)
-#define IOP13XX_MU_MIMR	IOP13XX_MU_OFFSET(0x48)
-#define IOP13XX_MU_MUCR	IOP13XX_MU_OFFSET(0x50)
-#define IOP13XX_MU_QBAR	IOP13XX_MU_OFFSET(0x54)
-#define IOP13XX_MU_MUBAR      	IOP13XX_MU_OFFSET(0x84)
-
-#define IOP13XX_MU_WINDOW_SIZE	(8 * 1024)
-#define IOP13XX_MU_BASE_PHYS	(0xff000000)
-#define IOP13XX_MU_BASE_PCI	(0xff000000)
-#define IOP13XX_MU_MIMR_PCI	(IOP13XX_MU_BASE_PCI + 0x48)
-#define IOP13XX_MU_MIMR_CORE_SELECT (15)
-/*=======================================================================*/
-
-/*==============================ADMA UNITS===============================*/
-#define IOP13XX_ADMA_PHYS_BASE(chan)	IOP13XX_REG_ADDR32_PHYS((chan << 9))
-#define IOP13XX_ADMA_UPPER_PA(chan)	(IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
-
-/*==============================XSI BRIDGE===============================*/
-#define IOP13XX_XBG_BECSR		IOP13XX_REG_ADDR32(0x178c)
-#define IOP13XX_XBG_BERAR		IOP13XX_REG_ADDR32(0x1790)
-#define IOP13XX_XBG_BERUAR		IOP13XX_REG_ADDR32(0x1794)
-#define is_atue_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
-					IOP13XX_PMMR_VIRT_TO_PHYS(\
-					IOP13XX_ATUE_OCCDR))\
-					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
-#define is_atux_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
-					IOP13XX_PMMR_VIRT_TO_PHYS(\
-					IOP13XX_ATUX_OCCDR))\
-					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
-/*=======================================================================*/
-
-#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
-							(ofs))
-
-#define IOP13XX_PBI_CR	       		IOP13XX_PBI_OFFSET(0x0)
-#define IOP13XX_PBI_SR	       		IOP13XX_PBI_OFFSET(0x4)
-#define IOP13XX_PBI_BAR0      		IOP13XX_PBI_OFFSET(0x8)
-#define IOP13XX_PBI_LR0       		IOP13XX_PBI_OFFSET(0xc)
-#define IOP13XX_PBI_BAR1      		IOP13XX_PBI_OFFSET(0x10)
-#define IOP13XX_PBI_LR1       		IOP13XX_PBI_OFFSET(0x14)
-
-#define IOP13XX_PROCESSOR_FREQ		IOP13XX_REG_ADDR32(0x2180)
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM  	0x1e1e1e1e
-#define IOP_WDTCR_EN      	0xe1e1e1e1
-#define IOP_WDTCR_DIS_ARM 	0x1f1f1f1f
-#define IOP_WDTCR_DIS     	0xf1f1f1f1
-#define IOP_RCSR_WDT		(1 << 5) /* reset caused by watchdog timer */
-#define IOP13XX_WDTSR_WRITE_EN	(1 << 31) /* used to speed up reset requests */
-#define IOP13XX_WDTCR_IB_RESET	(1 << 0)
-
-#endif /* _IOP13XX_HW_H_ */
diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/include/asm-arm/arch-iop13xx/iq81340.h
deleted file mode 100644
index ba2cf931e9ce..000000000000
--- a/include/asm-arm/arch-iop13xx/iq81340.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _IQ81340_H_
-#define _IQ81340_H_
-
-#define IQ81340_PCE_BAR0    IOP13XX_PBI_LOWER_MEM_RA
-#define IQ81340_PCE_BAR1    (IQ81340_PCE_BAR0 + 0x02000000)
-
-#define IQ81340_FLASHBASE   IQ81340_PCE_BAR0	/* Flash */
-
-#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a))
-
-#define IQ81340_PRD_CODE    IQ81340_PCE_BAR1_OFFSET(0)
-#define IQ81340_BRD_STEP    IQ81340_PCE_BAR1_OFFSET(0x10000)
-#define IQ81340_CPLD_REV    IQ81340_PCE_BAR1_OFFSET(0x20000)
-#define IQ81340_LED	     IQ81340_PCE_BAR1_OFFSET(0x30000)
-#define IQ81340_LHEX	     IQ81340_PCE_BAR1_OFFSET(0x40000)
-#define IQ81340_RHEX	     IQ81340_PCE_BAR1_OFFSET(0x50000)
-#define IQ81340_BUZZER	     IQ81340_PCE_BAR1_OFFSET(0x60000)
-#define IQ81340_32K_NVRAM   IQ81340_PCE_BAR1_OFFSET(0x70000)
-#define IQ81340_256K_NVRAM  IQ81340_PCE_BAR1_OFFSET(0x80000)
-#define IQ81340_ROTARY_SW   IQ81340_PCE_BAR1_OFFSET(0xd0000)
-#define IQ81340_BATT_STAT   IQ81340_PCE_BAR1_OFFSET(0xf0000)
-#define IQ81340_CMP_FLSH    IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */
-
-#define PBI_CF_IDE_BASE     (IQ81340_CMP_FLSH)
-#define PBI_CF_BAR_ADDR     (IOP13XX_PBI_BAR1)
-
-
-#endif	/* _IQ81340_H_ */
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h
deleted file mode 100644
index 054e7acb5bfa..000000000000
--- a/include/asm-arm/arch-iop13xx/irqs.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef _IOP13XX_IRQS_H_
-#define _IOP13XX_IRQS_H_
-
-#ifndef __ASSEMBLER__
-#include <linux/types.h>
-
-/* INTPND0 CP6 R0 Page 3
- */
-static inline u32 read_intpnd_0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val));
-	return val;
-}
-
-/* INTPND1 CP6 R1 Page 3
- */
-static inline u32 read_intpnd_1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val));
-	return val;
-}
-
-/* INTPND2 CP6 R2 Page 3
- */
-static inline u32 read_intpnd_2(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val));
-	return val;
-}
-
-/* INTPND3 CP6 R3 Page 3
- */
-static inline u32 read_intpnd_3(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val));
-	return val;
-}
-#endif
-
-#define INTBASE 0
-#define INTSIZE_4 1
-
-/*
- * iop34x chipset interrupts
- */
-#define IOP13XX_IRQ(x)		(IOP13XX_IRQ_OFS + (x))
-
-/*
- * On IRQ or FIQ register
- */
-#define IRQ_IOP13XX_ADMA0_EOT	(0)
-#define IRQ_IOP13XX_ADMA0_EOC	(1)
-#define IRQ_IOP13XX_ADMA1_EOT	(2)
-#define IRQ_IOP13XX_ADMA1_EOC	(3)
-#define IRQ_IOP13XX_ADMA2_EOT	(4)
-#define IRQ_IOP13XX_ADMA2_EOC	(5)
-#define IRQ_IOP134_WATCHDOG	(6)
-#define IRQ_IOP13XX_RSVD_7	(7)
-#define IRQ_IOP13XX_TIMER0	(8)
-#define IRQ_IOP13XX_TIMER1	(9)
-#define IRQ_IOP13XX_I2C_0	(10)
-#define IRQ_IOP13XX_I2C_1	(11)
-#define IRQ_IOP13XX_MSG	(12)
-#define IRQ_IOP13XX_MSGIBQ	(13)
-#define IRQ_IOP13XX_ATU_IM	(14)
-#define IRQ_IOP13XX_ATU_BIST	(15)
-#define IRQ_IOP13XX_PPMU	(16)
-#define IRQ_IOP13XX_COREPMU	(17)
-#define IRQ_IOP13XX_CORECACHE	(18)
-#define IRQ_IOP13XX_RSVD_19	(19)
-#define IRQ_IOP13XX_RSVD_20	(20)
-#define IRQ_IOP13XX_RSVD_21	(21)
-#define IRQ_IOP13XX_RSVD_22	(22)
-#define IRQ_IOP13XX_RSVD_23	(23)
-#define IRQ_IOP13XX_XINT0	(24)
-#define IRQ_IOP13XX_XINT1	(25)
-#define IRQ_IOP13XX_XINT2	(26)
-#define IRQ_IOP13XX_XINT3	(27)
-#define IRQ_IOP13XX_XINT4	(28)
-#define IRQ_IOP13XX_XINT5	(29)
-#define IRQ_IOP13XX_XINT6	(30)
-#define IRQ_IOP13XX_XINT7	(31)
-				      /* IINTSRC1 bit */
-#define IRQ_IOP13XX_XINT8	(32)  /* 0  */
-#define IRQ_IOP13XX_XINT9	(33)  /* 1  */
-#define IRQ_IOP13XX_XINT10	(34)  /* 2  */
-#define IRQ_IOP13XX_XINT11	(35)  /* 3  */
-#define IRQ_IOP13XX_XINT12	(36)  /* 4  */
-#define IRQ_IOP13XX_XINT13	(37)  /* 5  */
-#define IRQ_IOP13XX_XINT14	(38)  /* 6  */
-#define IRQ_IOP13XX_XINT15	(39)  /* 7  */
-#define IRQ_IOP13XX_RSVD_40	(40)  /* 8  */
-#define IRQ_IOP13XX_RSVD_41	(41)  /* 9  */
-#define IRQ_IOP13XX_RSVD_42	(42)  /* 10 */
-#define IRQ_IOP13XX_RSVD_43	(43)  /* 11 */
-#define IRQ_IOP13XX_RSVD_44	(44)  /* 12 */
-#define IRQ_IOP13XX_RSVD_45	(45)  /* 13 */
-#define IRQ_IOP13XX_RSVD_46	(46)  /* 14 */
-#define IRQ_IOP13XX_RSVD_47	(47)  /* 15 */
-#define IRQ_IOP13XX_RSVD_48	(48)  /* 16 */
-#define IRQ_IOP13XX_RSVD_49	(49)  /* 17 */
-#define IRQ_IOP13XX_RSVD_50	(50)  /* 18 */
-#define IRQ_IOP13XX_UART0	(51)  /* 19 */
-#define IRQ_IOP13XX_UART1	(52)  /* 20 */
-#define IRQ_IOP13XX_PBIE	(53)  /* 21 */
-#define IRQ_IOP13XX_ATU_CRW	(54)  /* 22 */
-#define IRQ_IOP13XX_ATU_ERR	(55)  /* 23 */
-#define IRQ_IOP13XX_MCU_ERR	(56)  /* 24 */
-#define IRQ_IOP13XX_ADMA0_ERR	(57)  /* 25 */
-#define IRQ_IOP13XX_ADMA1_ERR	(58)  /* 26 */
-#define IRQ_IOP13XX_ADMA2_ERR	(59)  /* 27 */
-#define IRQ_IOP13XX_RSVD_60	(60)  /* 28 */
-#define IRQ_IOP13XX_RSVD_61	(61)  /* 29 */
-#define IRQ_IOP13XX_MSG_ERR	(62)  /* 30 */
-#define IRQ_IOP13XX_RSVD_63	(63)  /* 31 */
-				      /* IINTSRC2 bit */
-#define IRQ_IOP13XX_INTERPROC	(64)  /* 0  */
-#define IRQ_IOP13XX_RSVD_65	(65)  /* 1  */
-#define IRQ_IOP13XX_RSVD_66	(66)  /* 2  */
-#define IRQ_IOP13XX_RSVD_67	(67)  /* 3  */
-#define IRQ_IOP13XX_RSVD_68	(68)  /* 4  */
-#define IRQ_IOP13XX_RSVD_69	(69)  /* 5  */
-#define IRQ_IOP13XX_RSVD_70	(70)  /* 6  */
-#define IRQ_IOP13XX_RSVD_71	(71)  /* 7  */
-#define IRQ_IOP13XX_RSVD_72	(72)  /* 8  */
-#define IRQ_IOP13XX_RSVD_73	(73)  /* 9  */
-#define IRQ_IOP13XX_RSVD_74	(74)  /* 10 */
-#define IRQ_IOP13XX_RSVD_75	(75)  /* 11 */
-#define IRQ_IOP13XX_RSVD_76	(76)  /* 12 */
-#define IRQ_IOP13XX_RSVD_77	(77)  /* 13 */
-#define IRQ_IOP13XX_RSVD_78	(78)  /* 14 */
-#define IRQ_IOP13XX_RSVD_79	(79)  /* 15 */
-#define IRQ_IOP13XX_RSVD_80	(80)  /* 16 */
-#define IRQ_IOP13XX_RSVD_81	(81)  /* 17 */
-#define IRQ_IOP13XX_RSVD_82	(82)  /* 18 */
-#define IRQ_IOP13XX_RSVD_83	(83)  /* 19 */
-#define IRQ_IOP13XX_RSVD_84	(84)  /* 20 */
-#define IRQ_IOP13XX_RSVD_85	(85)  /* 21 */
-#define IRQ_IOP13XX_RSVD_86	(86)  /* 22 */
-#define IRQ_IOP13XX_RSVD_87	(87)  /* 23 */
-#define IRQ_IOP13XX_RSVD_88	(88)  /* 24 */
-#define IRQ_IOP13XX_RSVD_89	(89)  /* 25 */
-#define IRQ_IOP13XX_RSVD_90	(90)  /* 26 */
-#define IRQ_IOP13XX_RSVD_91	(91)  /* 27 */
-#define IRQ_IOP13XX_RSVD_92	(92)  /* 28 */
-#define IRQ_IOP13XX_RSVD_93	(93)  /* 29 */
-#define IRQ_IOP13XX_SIB_ERR	(94)  /* 30 */
-#define IRQ_IOP13XX_SRAM_ERR	(95)  /* 31 */
-				      /* IINTSRC3 bit */
-#define IRQ_IOP13XX_I2C_2	(96)  /* 0  */
-#define IRQ_IOP13XX_ATUE_BIST	(97)  /* 1  */
-#define IRQ_IOP13XX_ATUE_CRW	(98)  /* 2  */
-#define IRQ_IOP13XX_ATUE_ERR	(99)  /* 3  */
-#define IRQ_IOP13XX_IMU	(100) /* 4  */
-#define IRQ_IOP13XX_RSVD_101	(101) /* 5  */
-#define IRQ_IOP13XX_RSVD_102	(102) /* 6  */
-#define IRQ_IOP13XX_TPMI0_OUT	(103) /* 7  */
-#define IRQ_IOP13XX_TPMI1_OUT	(104) /* 8  */
-#define IRQ_IOP13XX_TPMI2_OUT	(105) /* 9  */
-#define IRQ_IOP13XX_TPMI3_OUT	(106) /* 10 */
-#define IRQ_IOP13XX_ATUE_IMA	(107) /* 11 */
-#define IRQ_IOP13XX_ATUE_IMB	(108) /* 12 */
-#define IRQ_IOP13XX_ATUE_IMC	(109) /* 13 */
-#define IRQ_IOP13XX_ATUE_IMD	(110) /* 14 */
-#define IRQ_IOP13XX_MU_MSI_TB	(111) /* 15 */
-#define IRQ_IOP13XX_RSVD_112	(112) /* 16 */
-#define IRQ_IOP13XX_INBD_MSI	(113) /* 17 */
-#define IRQ_IOP13XX_RSVD_114	(114) /* 18 */
-#define IRQ_IOP13XX_RSVD_115	(115) /* 19 */
-#define IRQ_IOP13XX_RSVD_116	(116) /* 20 */
-#define IRQ_IOP13XX_RSVD_117	(117) /* 21 */
-#define IRQ_IOP13XX_RSVD_118	(118) /* 22 */
-#define IRQ_IOP13XX_RSVD_119	(119) /* 23 */
-#define IRQ_IOP13XX_RSVD_120	(120) /* 24 */
-#define IRQ_IOP13XX_RSVD_121	(121) /* 25 */
-#define IRQ_IOP13XX_RSVD_122	(122) /* 26 */
-#define IRQ_IOP13XX_RSVD_123	(123) /* 27 */
-#define IRQ_IOP13XX_RSVD_124	(124) /* 28 */
-#define IRQ_IOP13XX_RSVD_125	(125) /* 29 */
-#define IRQ_IOP13XX_RSVD_126	(126) /* 30 */
-#define IRQ_IOP13XX_HPI	(127) /* 31 */
-
-#ifdef CONFIG_PCI_MSI
-#define IRQ_IOP13XX_MSI_0	(IRQ_IOP13XX_HPI + 1)
-#define NR_IOP13XX_IRQS 	(IRQ_IOP13XX_MSI_0 + 128)
-#else
-#define NR_IOP13XX_IRQS	(IRQ_IOP13XX_HPI + 1)
-#endif
-
-#define NR_IRQS		NR_IOP13XX_IRQS
-
-#endif /* _IOP13XX_IRQ_H_ */
diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h
deleted file mode 100644
index 031a0fa78eff..000000000000
--- a/include/asm-arm/arch-iop13xx/memory.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/arch/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-#define TASK_SIZE  	UL(0x3f000000)
-#define PAGE_OFFSET	UL(0x40000000)
-#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_ARCH_IOP13XX)
-#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
-#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
-#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
-#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-
-/* RAM has 1:1 mapping on the PCIe/x Busses */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)    (__phys_to_virt(x))
-
-#define virt_to_lbus(x) 					   \
-(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
-((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
-((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
-((x) - PAGE_OFFSET + PHYS_OFFSET))
-
-#define lbus_to_virt(x)                                            \
-(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
-((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
-((x) - PHYS_OFFSET + PAGE_OFFSET))
-
-/* Device is an lbus device if it is on the platform bus of the IOP13XX */
-#define is_lbus_device(dev) (dev &&\
-			     (strncmp(dev->bus->name, "platform", 8) == 0))
-
-#define __arch_page_to_dma(dev, page)					\
-({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
-(dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr) \
-({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr) \
-({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
-
-#endif /* CONFIG_ARCH_IOP13XX */
-#endif /* !ASSEMBLY */
-
-#define PFN_TO_NID(addr)	(0)
-
-#endif
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/include/asm-arm/arch-iop13xx/msi.h
deleted file mode 100644
index b80c5ae17e99..000000000000
--- a/include/asm-arm/arch-iop13xx/msi.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _IOP13XX_MSI_H_
-#define _IOP13XX_MSI_H_
-#ifdef CONFIG_PCI_MSI
-void iop13xx_msi_init(void);
-#else
-static inline void iop13xx_msi_init(void)
-{
-	return;
-}
-#endif
-#endif
diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h
deleted file mode 100644
index 4041f30d4cd3..000000000000
--- a/include/asm-arm/arch-iop13xx/pci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
-			       PCI_STATUS_SIG_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_MASTER_ABORT | \
-			       PCI_STATUS_SIG_SYSTEM_ERROR | \
-	 		       PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
-				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
-				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
-				    IOP13XX_ATUE_STAT_ERR_COR |	       \
-				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
-				    IOP13XX_ATUE_STAT_CRS |	       \
-				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
-				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
-				    IOP13XX_ATUX_STAT_REC_SCEM |       \
-				    IOP13XX_ATUX_STAT_TX_SERR |	       \
-				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_REC_SERR |       \
-				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
-				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h
deleted file mode 100644
index 8575af8db78c..000000000000
--- a/include/asm-arm/arch-iop13xx/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-iop13xx/system.h
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/iop13xx.h>
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Reset the internal bus (warning both cores are reset)
-	 */
-	write_wdtcr(IOP_WDTCR_EN_ARM);
-	write_wdtcr(IOP_WDTCR_EN);
-	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
-	write_wdtcr(0x1000);
-
-	for(;;);
-}
diff --git a/include/asm-arm/arch-iop13xx/time.h b/include/asm-arm/arch-iop13xx/time.h
deleted file mode 100644
index 49213d9d7cad..000000000000
--- a/include/asm-arm/arch-iop13xx/time.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef _IOP13XX_TIME_H_
-#define _IOP13XX_TIME_H_
-#define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0
-
-#define IOP_TMR_EN	    0x02
-#define IOP_TMR_RELOAD	    0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1  0x00
-
-#define IOP13XX_XSI_FREQ_RATIO_MASK	(3 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_2   	(0 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_3	(1 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_4	(2 << 19)
-#define IOP13XX_CORE_FREQ_MASK		(7 << 16)
-#define IOP13XX_CORE_FREQ_600		(0 << 16)
-#define IOP13XX_CORE_FREQ_667		(1 << 16)
-#define IOP13XX_CORE_FREQ_800		(2 << 16)
-#define IOP13XX_CORE_FREQ_933		(3 << 16)
-#define IOP13XX_CORE_FREQ_1000		(4 << 16)
-#define IOP13XX_CORE_FREQ_1200		(5 << 16)
-
-void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
-
-static inline unsigned long iop13xx_core_freq(void)
-{
-	unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ);
-	freq &= IOP13XX_CORE_FREQ_MASK;
-	switch (freq) {
-	case IOP13XX_CORE_FREQ_600:
-		return 600000000;
-	case IOP13XX_CORE_FREQ_667:
-		return 667000000;
-	case IOP13XX_CORE_FREQ_800:
-		return 800000000;
-	case IOP13XX_CORE_FREQ_933:
-		return 933000000;
-	case IOP13XX_CORE_FREQ_1000:
-		return 1000000000;
-	case IOP13XX_CORE_FREQ_1200:
-		return 1200000000;
-	default:
-		printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
-			__FUNCTION__);
-	}
-
-	return 800000000;
-}
-
-static inline unsigned long iop13xx_xsi_bus_ratio(void)
-{
-	unsigned long  ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ);
-	ratio &= IOP13XX_XSI_FREQ_RATIO_MASK;
-	switch (ratio) {
-	case IOP13XX_XSI_FREQ_RATIO_2:
-		return 2;
-	case IOP13XX_XSI_FREQ_RATIO_3:
-		return 3;
-	case IOP13XX_XSI_FREQ_RATIO_4:
-		return 4;
-	default:
-		printk("%s: warning unknown ratio, defaulting to 2\n",
-			__FUNCTION__);
-	}
-
-	return 2;
-}
-
-static inline void write_tmr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c9, 0" : "=r" (val));
-	return val;
-}
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_trr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (val));
-}
-#endif
diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h
deleted file mode 100644
index f0c51dd97ed8..000000000000
--- a/include/asm-arm/arch-iop13xx/timex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#include <asm/hardware.h>
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h
deleted file mode 100644
index dd9c2934190e..000000000000
--- a/include/asm-arm/arch-iop13xx/uncompress.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <asm/types.h>
-#include <linux/serial_reg.h>
-#include <asm/hardware.h>
-
-#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/include/asm-arm/arch-iop13xx/vmalloc.h
deleted file mode 100644
index c53456740345..000000000000
--- a/include/asm-arm/arch-iop13xx/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _VMALLOC_H_
-#define _VMALLOC_H_
-#define VMALLOC_END 	0xfa000000UL
-#endif
diff --git a/include/asm-arm/arch-iop32x/adma.h b/include/asm-arm/arch-iop32x/adma.h
deleted file mode 100644
index 5ed92037dd10..000000000000
--- a/include/asm-arm/arch-iop32x/adma.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef IOP32X_ADMA_H
-#define IOP32X_ADMA_H
-#include <asm/hardware/iop3xx-adma.h>
-#endif
-
diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S
deleted file mode 100644
index 9022b6849e23..000000000000
--- a/include/asm-arm/arch-iop32x/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rx
-		mov	\rx, #0xfe000000	@ physical as well as virtual
-		orr	\rx, \rx, #0x00800000	@ location of the UART
-		.endm
-
-#define UART_SHIFT	0
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h
deleted file mode 100644
index e977a9ef3160..000000000000
--- a/include/asm-arm/arch-iop32x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S
deleted file mode 100644
index 207db99dfbd2..000000000000
--- a/include/asm-arm/arch-iop32x/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop32x.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
-	cmp     \irqstat, #0
-	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/include/asm-arm/arch-iop32x/glantank.h b/include/asm-arm/arch-iop32x/glantank.h
deleted file mode 100644
index bf0665acc1c1..000000000000
--- a/include/asm-arm/arch-iop32x/glantank.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/glantank.h
- *
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART		0xfe800000	/* UART */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/gpio.h b/include/asm-arm/arch-iop32x/gpio.h
deleted file mode 100644
index 708f4ec9db1d..000000000000
--- a/include/asm-arm/arch-iop32x/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP32X_GPIO_H
-#define __ASM_ARCH_IOP32X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h
deleted file mode 100644
index 6556ed5eee31..000000000000
--- a/include/asm-arm/arch-iop32x/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-#define pcibios_assign_all_busses() 1
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0x00000000
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop32x.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
deleted file mode 100644
index 958af751a484..000000000000
--- a/include/asm-arm/arch-iop32x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a)		(a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h
deleted file mode 100644
index 0d8af57221a1..000000000000
--- a/include/asm-arm/arch-iop32x/iop32x.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iop32x.h
- *
- * Intel IOP32X Chip definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP32X_H
-#define __IOP32X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE            0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h
deleted file mode 100644
index fff4eafa1f6b..000000000000
--- a/include/asm-arm/arch-iop32x/iq31244.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iq31244.h
- *
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART		0xfe800000	/* UART #1 */
-#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h
deleted file mode 100644
index eb69db9b9a06..000000000000
--- a/include/asm-arm/arch-iop32x/iq80321.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/iq80321.h
- *
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART		0xfe800000	/* UART #1 */
-#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h
deleted file mode 100644
index bbaef873afce..000000000000
--- a/include/asm-arm/arch-iop32x/irqs.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/irqs.h
- *
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
-
-#define NR_IRQS			32
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h
deleted file mode 100644
index c51072af214e..000000000000
--- a/include/asm-arm/arch-iop32x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xa0000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/n2100.h b/include/asm-arm/arch-iop32x/n2100.h
deleted file mode 100644
index 77a8af476629..000000000000
--- a/include/asm-arm/arch-iop32x/n2100.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/n2100.h
- *
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART		0xfe800000	/* UART */
-
-#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h
deleted file mode 100644
index 17b7eb7e9c0d..000000000000
--- a/include/asm-arm/arch-iop32x/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	local_irq_disable();
-
-	if (machine_is_n2100()) {
-		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
-		while (1)
-			;
-	}
-
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop32x/time.h b/include/asm-arm/arch-iop32x/time.h
deleted file mode 100644
index 0f28c9949623..000000000000
--- a/include/asm-arm/arch-iop32x/time.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _IOP32X_TIME_H_
-#define _IOP32X_TIME_H_
-#define IRQ_IOP_TIMER0 IRQ_IOP32X_TIMER0
-#endif
diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h
deleted file mode 100644
index 9934b087311b..000000000000
--- a/include/asm-arm/arch-iop32x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/timex.h
- *
- * IOP32x architecture timex specifications
- */
-
-#include <asm/hardware.h>
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h
deleted file mode 100644
index 070f15818fe7..000000000000
--- a/include/asm-arm/arch-iop32x/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/hardware.h>
-
-static volatile u8 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80321())
-		uart_base = (volatile u8 *)IQ80321_UART;
-	else if (machine_is_iq31244() || machine_is_em7210())
-		uart_base = (volatile u8 *)IQ31244_UART;
-	else
-		uart_base = (volatile u8 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h
deleted file mode 100644
index 0a70baa19517..000000000000
--- a/include/asm-arm/arch-iop32x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop32x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-iop33x/adma.h b/include/asm-arm/arch-iop33x/adma.h
deleted file mode 100644
index 4b92f795f90e..000000000000
--- a/include/asm-arm/arch-iop33x/adma.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef IOP33X_ADMA_H
-#define IOP33X_ADMA_H
-#include <asm/hardware/iop3xx-adma.h>
-#endif
-
diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S
deleted file mode 100644
index 9e7132ebe6a7..000000000000
--- a/include/asm-arm/arch-iop33x/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ mmu enabled?
-		moveq	\rx, #0xff000000	@ physical
-		movne	\rx, #0xfe000000	@ virtual
-		orr	\rx, \rx, #0x00ff0000
-		orr	\rx, \rx, #0x0000f700
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h
deleted file mode 100644
index b7775fdc5ad3..000000000000
--- a/include/asm-arm/arch-iop33x/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/dma.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S
deleted file mode 100644
index b8e3d449e882..000000000000
--- a/include/asm-arm/arch-iop33x/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP33x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/iop33x.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
-	cmp     \irqstat, #0
-	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
-	adds    \irqnr, \irqstat, #1
-	movne   \irqnr, \irqstat, lsr #2
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/include/asm-arm/arch-iop33x/gpio.h b/include/asm-arm/arch-iop33x/gpio.h
deleted file mode 100644
index ddd55bba9bb9..000000000000
--- a/include/asm-arm/arch-iop33x/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP33X_GPIO_H
-#define __ASM_ARCH_IOP33X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h
deleted file mode 100644
index 0659cf94d040..000000000000
--- a/include/asm-arm/arch-iop33x/hardware.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000.  The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses.  See
- * arch/arm/mach-iop3xx/iop3xx-pci.c
- */
-#define pcibios_assign_all_busses()	1
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0x00000000
-
-#ifndef __ASSEMBLY__
-void iop33x_init_irq(void);
-
-extern struct platform_device iop33x_uart0_device;
-extern struct platform_device iop33x_uart1_device;
-#endif
-
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop33x.h"
-
-/*
- * Board specific bits
- */
-#include "iq80331.h"
-#include "iq80332.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
deleted file mode 100644
index fec9c53e2b10..000000000000
--- a/include/asm-arm/arch-iop33x/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/io.h
- *
- * Copyright (C) 2001  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware.h>
-
-extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
-	unsigned int mtype);
-extern void __iop3xx_iounmap(void __iomem *addr);
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-#define __mem_pci(a)		(a)
-
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h
deleted file mode 100644
index 766985b9a723..000000000000
--- a/include/asm-arm/arch-iop33x/iop33x.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iop33x.h
- *
- * Intel IOP33X Chip definitions
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP33X_H
-#define __IOP33X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* UARTs  */
-#define IOP33X_UART0_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
-#define IOP33X_UART0_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
-#define IOP33X_UART1_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
-#define IOP33X_UART1_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ pci on top of physical ram in memory map
- */
-#define IOP33X_MAX_RAM_SIZE		0x80000000UL
-#define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h
deleted file mode 100644
index 79b9302017ea..000000000000
--- a/include/asm-arm/arch-iop33x/iq80331.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iq80331.h
- *
- * Intel IQ80331 evaluation board registers
- */
-
-#ifndef __IQ80331_H
-#define __IQ80331_H
-
-#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
-#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
-#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
-#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h
deleted file mode 100644
index 053165629492..000000000000
--- a/include/asm-arm/arch-iop33x/iq80332.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/iq80332.h
- *
- * Intel IQ80332 evaluation board registers
- */
-
-#ifndef __IQ80332_H
-#define __IQ80332_H
-
-#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
-#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
-#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
-#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h
deleted file mode 100644
index d045f8403396..000000000000
--- a/include/asm-arm/arch-iop33x/irqs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/irqs.h
- *
- * Author:	Dave Jiang (dave.jiang@intel.com)
- * Copyright:	(C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80331 chipset interrupts
- */
-#define IRQ_IOP33X_DMA0_EOT	0
-#define IRQ_IOP33X_DMA0_EOC	1
-#define IRQ_IOP33X_DMA1_EOT	2
-#define IRQ_IOP33X_DMA1_EOC	3
-#define IRQ_IOP33X_AA_EOT	6
-#define IRQ_IOP33X_AA_EOC	7
-#define IRQ_IOP33X_TIMER0	8
-#define IRQ_IOP33X_TIMER1	9
-#define IRQ_IOP33X_I2C_0	10
-#define IRQ_IOP33X_I2C_1	11
-#define IRQ_IOP33X_MSG		12
-#define IRQ_IOP33X_MSGIBQ	13
-#define IRQ_IOP33X_ATU_BIST	14
-#define IRQ_IOP33X_PERFMON	15
-#define IRQ_IOP33X_CORE_PMU	16
-#define IRQ_IOP33X_XINT0	24
-#define IRQ_IOP33X_XINT1	25
-#define IRQ_IOP33X_XINT2	26
-#define IRQ_IOP33X_XINT3	27
-#define IRQ_IOP33X_XINT8	32
-#define IRQ_IOP33X_XINT9	33
-#define IRQ_IOP33X_XINT10	34
-#define IRQ_IOP33X_XINT11	35
-#define IRQ_IOP33X_XINT12	36
-#define IRQ_IOP33X_XINT13	37
-#define IRQ_IOP33X_XINT14	38
-#define IRQ_IOP33X_XINT15	39
-#define IRQ_IOP33X_UART0	51
-#define IRQ_IOP33X_UART1	52
-#define IRQ_IOP33X_PBIE		53
-#define IRQ_IOP33X_ATU_CRW	54
-#define IRQ_IOP33X_ATU_ERR	55
-#define IRQ_IOP33X_MCU_ERR	56
-#define IRQ_IOP33X_DMA0_ERR	57
-#define IRQ_IOP33X_DMA1_ERR	58
-#define IRQ_IOP33X_AA_ERR	60
-#define IRQ_IOP33X_MSG_ERR	62
-#define IRQ_IOP33X_HPI		63
-
-#define NR_IRQS			64
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h
deleted file mode 100644
index c8749127d6ab..000000000000
--- a/include/asm-arm/arch-iop33x/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> PCI DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	(__virt_to_phys(x))
-#define __bus_to_virt(x)	(__phys_to_virt(x))
-
-
-#endif
diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h
deleted file mode 100644
index 00dd07ece262..000000000000
--- a/include/asm-arm/arch-iop33x/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-iop33x/time.h b/include/asm-arm/arch-iop33x/time.h
deleted file mode 100644
index 4ac4d7664f85..000000000000
--- a/include/asm-arm/arch-iop33x/time.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _IOP33X_TIME_H_
-#define _IOP33X_TIME_H_
-#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0
-#endif
diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h
deleted file mode 100644
index fe3e1e369ff9..000000000000
--- a/include/asm-arm/arch-iop33x/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-
-#include <asm/hardware.h>
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h
deleted file mode 100644
index e17fbc05877b..000000000000
--- a/include/asm-arm/arch-iop33x/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/hardware.h>
-
-static volatile u32 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80331() || machine_is_iq80332())
-		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
-	else
-		uart_base = (volatile u32 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h
deleted file mode 100644
index 66f545a7f4fc..000000000000
--- a/include/asm-arm/arch-iop33x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-iop33x/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S
deleted file mode 100644
index bc8b39654793..000000000000
--- a/include/asm-arm/arch-ixp2000/debug-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-ixp2000/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro  addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xc0000000	@ Physical base
-		movne	\rx, #0xfe000000	@ virtual base
-		orrne	\rx, \rx, #0x00f00000
-		orr	\rx, \rx, #0x00030000
-#ifdef	__ARMEB__
-		orr	\rx, \rx, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h
deleted file mode 100644
index 548d8dc507eb..000000000000
--- a/include/asm-arm/arch-ixp2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/dma.h
- *
- * Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h
deleted file mode 100644
index 42f3c28dc5c4..000000000000
--- a/include/asm-arm/arch-ixp2000/enp2611.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/enp2611.h
- *
- * Register and other defines for Radisys ENP-2611
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
- * original version carries the following notices:
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ENP2611_H
-#define __ENP2611_H
-
-#define ENP2611_CALEB_PHYS_BASE		0xc5000000
-#define ENP2611_CALEB_VIRT_BASE		0xfe000000
-#define ENP2611_CALEB_SIZE		0x00100000
-
-#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
-#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
-#define ENP2611_PM3386_0_SIZE		0x00100000
-
-#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
-#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
-#define ENP2611_PM3386_1_SIZE		0x00100000
-
-#define ENP2611_GPIO_SCL		7
-#define ENP2611_GPIO_SDA		6
-
-#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
-#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
-#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
-#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
-#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S
deleted file mode 100644
index 11d512ad5945..000000000000
--- a/include/asm-arm/arch-ixp2000/entry-macro.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP2000-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/arch/irqs.h>
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqnr, #0x0              @clear out irqnr as default
-                mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		orr	\base, \base, #0x08
-		ldr	\irqstat, [\base]         @ get interrupts
-
-		cmp	\irqstat, #0
-		beq	1001f
-
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		subs    \irqnr, \base, \irqnr
-
-		/*
-		 * We handle PCIA and PCIB here so we don't have an
-		 * extra layer of code just to check these two bits.
-		 */
-		cmp	\irqnr, #IRQ_IXP2000_PCI
-		bne	1001f
-
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00c00000
-		orr	\base, \base, #0x00000100
-		orr	\base, \base, #0x00000058
-		ldr	\irqstat, [\base]
-
-		mov	\tmp, #(1<<26)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIA
-		bne	1001f
-
-		mov	\tmp, #(1<<27)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIB
-
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h
deleted file mode 100644
index 03cbbe1fd9d8..000000000000
--- a/include/asm-arm/arch-ixp2000/gpio.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.  
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN				0
-#define GPIO_OUT			1
-
-#define IXP2000_GPIO_LOW		0
-#define IXP2000_GPIO_HIGH		1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
-	return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
-	if (value == IXP2000_GPIO_HIGH) {
-		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
-	} else if (value == IXP2000_GPIO_LOW) {
-		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
-	}
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/include/asm-arm/arch-ixp2000/hardware.h
deleted file mode 100644
index e7ea781c48aa..000000000000
--- a/include/asm-arm/arch-ixp2000/hardware.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/hardware.h
- *
- * Hardware definitions for IXP2400/2800 based systems
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2001-2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-/*
- * This needs to be platform-specific?
- */
-#define PCIBIOS_MIN_IO          0x00000000
-#define PCIBIOS_MIN_MEM         0x00000000
-
-#include "ixp2000-regs.h"	/* Chipset Registers */
-
-#define pcibios_assign_all_busses() 0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific bits
- */
-#include "enp2611.h"		/* ENP-2611 */
-#include "ixdp2x00.h"		/* IXDP2400/2800 */
-#include "ixdp2x01.h"		/* IXDP2401/2801 */
-
-#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
deleted file mode 100644
index c0ff2c6c66e7..000000000000
--- a/include/asm-arm/arch-ixp2000/io.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002  Intel Corp.
- * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __mem_pci(a)		(a)
-
-/*
- * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
- * transactions the other way round (MEM transactions don't have this
- * issue), so if we want to support those models, we need to override
- * the standard I/O functions.
- *
- * B0 and later have a bit that can be set to 1 to get the proper
- * behavior for I/O transactions, which then allows us to use the
- * standard I/O functions.  This is what we do if the user does not
- * explicitly ask for support for pre-B0.
- */
-#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-
-#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
-#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
-
-#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
-#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
-#define outl(v,p)		__raw_writel((v),___io(p))
-
-#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
-#define inw(p)		\
-	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
-#define inl(p)		\
-	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
-#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
-#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
-#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
-#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
-
-#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
-
-#define ioread8(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readb(alignb(p));		\
-		} else {					\
-			__v = __raw_readb(p);			\
-		}						\
-								\
-		__v;						\
-	})							\
-
-#define ioread16(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readw(alignw(p));		\
-		} else {					\
-			__v = le16_to_cpu(__raw_readw(p));	\
-		}						\
-								\
-		__v;						\
-	})
-
-#define ioread32(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readl(p);			\
-		} else {					\
-			__v = le32_to_cpu(__raw_readl(p));	\
-		}						\
-								\
-		 __v;						\
-	})
-
-#define iowrite8(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writeb((v), alignb(p));		\
-		} else {					\
-			__raw_writeb((v), p);			\
-		}						\
-	})
-
-#define iowrite16(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writew((v), alignw(p));		\
-		} else {					\
-			__raw_writew(cpu_to_le16(v), p);	\
-		}						\
-	})
-
-#define iowrite32(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writel((v), p);			\
-		} else {					\
-			__raw_writel(cpu_to_le32(v), p);	\
-		}						\
-	})
-
-#define ioport_map(port, nr)	___io(port)
-
-#define ioport_unmap(addr)
-#else
-#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h
deleted file mode 100644
index 62f09c7ff420..000000000000
--- a/include/asm-arm/arch-ixp2000/irqs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/irqs.h
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IRQS_H
-#define _IRQS_H
-
-/*
- * Do NOT add #ifdef MACHINE_FOO in here.
- * Simpy add your machine IRQs here and increase NR_IRQS if needed to
- * hold your machine's IRQ table.
- */
-
-/*
- * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
- * register has those bit reserved. We just mark those interrupts
- * as invalid and this allows us to do mask/unmask with a single
- * shift operation instead of having to map the IRQ number to
- * a HW IRQ number.
- */
-#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
-#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
-#define	IRQ_IXP2000_UART		2
-#define	IRQ_IXP2000_GPIO		3
-#define	IRQ_IXP2000_TIMER1     		4
-#define	IRQ_IXP2000_TIMER2     		5
-#define	IRQ_IXP2000_TIMER3     		6
-#define	IRQ_IXP2000_TIMER4     		7
-#define	IRQ_IXP2000_PMU        		8               
-#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
-#define	IRQ_IXP2000_DMA1      		10
-#define	IRQ_IXP2000_DMA2      		11
-#define	IRQ_IXP2000_DMA3      		12
-#define	IRQ_IXP2000_PCI_DOORBELL	13
-#define	IRQ_IXP2000_ME_ATTN       	14 
-#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
-#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
-#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
-#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
-#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
-#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
-#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
-#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
-#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
-
-/* define generic GPIOs */
-#define IRQ_IXP2000_GPIO0		32
-#define IRQ_IXP2000_GPIO1		33
-#define IRQ_IXP2000_GPIO2		34
-#define IRQ_IXP2000_GPIO3		35
-#define IRQ_IXP2000_GPIO4		36
-#define IRQ_IXP2000_GPIO5		37
-#define IRQ_IXP2000_GPIO6		38
-#define IRQ_IXP2000_GPIO7		39
-
-/* split off the 2 PCI sources */
-#define IRQ_IXP2000_PCIA		40
-#define IRQ_IXP2000_PCIB		41
-
-/* Int sources from IRQ_ERROR_STATUS */
-#define IRQ_IXP2000_DRAM0_MIN_ERR	42
-#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
-#define IRQ_IXP2000_DRAM1_MIN_ERR	44
-#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
-#define IRQ_IXP2000_DRAM2_MIN_ERR	46
-#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
-/* 48-57 reserved */
-#define IRQ_IXP2000_SRAM0_ERR		58
-#define IRQ_IXP2000_SRAM1_ERR		59
-#define IRQ_IXP2000_SRAM2_ERR		60
-#define IRQ_IXP2000_SRAM3_ERR		61
-/* 62-65 reserved */
-#define IRQ_IXP2000_MEDIA_ERR		66
-#define IRQ_IXP2000_PCI_ERR			67
-#define IRQ_IXP2000_SP_INT			68
-
-#define NR_IXP2000_IRQS				69
-
-#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
-
-#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
-
-#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
-#define IXP2000_VALID_ERR_IRQ_MASK (\
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
-
-/*
- * This allows for all the on-chip sources plus up to 32 CPLD based
- * IRQs. Should be more than enough.
- */
-#define	IXP2000_BOARD_IRQS		32
-#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
-
-
-/* 
- * IXDP2400 specific IRQs
- */
-#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
-#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
-#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
-#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
-#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
-#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
-#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
-#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
-
-#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
-#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
-
-/* IXDP2800 specific IRQs */
-#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
-
-#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
-#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
-
-/* 
- * IRQs on both IXDP2x01 boards
- */
-#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
-#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
-#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
-#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
-#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
-#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
-#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
-#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
-#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
-#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
-#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
-
-#define IXDP2X01_VALID_IRQ_MASK ( \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
-
-/* 
- * IXDP2401 specific IRQs
- */
-#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
-
-#define	IXDP2401_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
-
-/*
- * IXDP2801-specific IRQs
- */
-#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
-#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
-
-#define	IXDP2801_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
-
-#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
-
-#endif /*_IRQS_H*/
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h
deleted file mode 100644
index 546e2e8e27b8..000000000000
--- a/include/asm-arm/arch-ixp2000/ixdp2x00.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixdp2x00.h
- *
- * Register and other defines for IXDP2[48]00 platforms
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXDP2X00_H_
-#define _IXDP2X00_H_
-
-/*
- * On board CPLD memory map
- */
-#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
-#define IXDP2X00_VIRT_CPLD_BASE		0xfe000000
-#define IXDP2X00_CPLD_SIZE		0x00100000
-
-
-#define IXDP2X00_CPLD_REG(x)  	\
-	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
-
-/*
- * IXDP2400 CPLD registers
- */
-#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
-#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
-#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
-#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
-#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
-#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
-#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
-#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
-
-/*
- * IXDP2800 CPLD registers
- */
-#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
-#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
-
-
-#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X00_GPIO_SCL		0x07
-#define	IXDP2X00_GPIO_SDA		0x06
-
-/*
- * PCI devfns for on-board devices. We need these to be able to
- * properly translate IRQs and for device removal.
- */
-#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
-#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
-#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
-#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
-#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
-#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
-
-#ifndef __ASSEMBLY__
-/*
- * The master NPU is always PCI master.
- */
-static inline unsigned int ixdp2x00_master_npu(void)
-{
-	return !!ixp2000_is_pcimaster();
-}
-
-/*
- * Helper functions used by ixdp2400 and ixdp2800 specific code
- */
-void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
-void ixdp2x00_slave_pci_postinit(void);
-void ixdp2x00_init_machine(void);
-void ixdp2x00_map_io(void);
-
-#endif
-
-#endif /*_IXDP2X00_H_ */
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h
deleted file mode 100644
index c6d51426e98f..000000000000
--- a/include/asm-arm/arch-ixp2000/ixdp2x01.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixdp2x01.h
- *
- * Platform definitions for IXDP2X01 && IXDP2801 systems
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- *
- * Based on original code Copyright (c) 2002-2003 Intel Corporation
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __IXDP2X01_H__
-#define __IXDP2X01_H__
-
-#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
-#define	IXDP2X01_VIRT_CPLD_BASE		0xfe000000
-#define	IXDP2X01_CPLD_REGION_SIZE	0x00100000
-
-#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
-#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
-
-#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
-#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
-
-#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
-#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
-
-#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
-#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
-
-#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
-#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
-#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
-#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
-#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
-#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
-
-#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
-
-#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
-#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
-#define IXDP2X01_FLASH_WINDOW_BITS 	25
-#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
-#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
-
-#define	IXDP2X01_UART_CLK		1843200
-
-#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X01_GPIO_SCL		0x07
-#define	IXDP2X01_GPIO_SDA		0x06
-
-#endif /* __IXDP2x01_H__ */
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
deleted file mode 100644
index ccae4bec92c5..000000000000
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/ixp2000-regs.h
- *
- * Chipset register definitions for IXP2400/2800 based systems.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXP2000_REGS_H_
-#define _IXP2000_REGS_H_
-
-/*
- * IXP2000 linux memory map:
- *
- * virt		phys		size
- * fb000000	db000000	16M		PCI CFG1
- * fc000000	da000000	16M		PCI CFG0
- * fd000000	d8000000	16M		PCI I/O
- * fe[0-7]00000			8M		per-platform mappings
- * fe900000	80000000	1M		SRAM #0 (first MB)
- * fea00000	cb400000	1M		SCRATCH ring get/put
- * feb00000	c8000000	1M		MSF
- * fec00000	df000000	1M		PCI CSRs
- * fed00000	de000000	1M		PCI CREG
- * fee00000	d6000000	1M		INTCTL
- * fef00000	c0000000	1M		CAP
- */
-
-/* 
- * Static I/O regions.
- *
- * Most of the registers are clumped in 4K regions spread throughout
- * the 0xc0000000 -> 0xc0100000 address range, but we just map in
- * the whole range using a single 1 MB section instead of small
- * 4K pages.  This has two advantages for us:
- *
- * 1) We use only one TLB entry for large number of on-chip I/O devices.
- *
- * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
- *    as required per erratum #66.  We accomplish this by using a
- *    new MT_IXP2000_DEVICE memory type with the bits set as required.
- *
- * CAP stands for CSR Access Proxy.
- *
- * If you change the virtual address of this mapping, please propagate
- * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
- * address of the UART located in this region.
- */
-
-#define	IXP2000_CAP_PHYS_BASE		0xc0000000
-#define	IXP2000_CAP_VIRT_BASE		0xfef00000
-#define	IXP2000_CAP_SIZE		0x00100000
-
-/*
- * Addresses for specific on-chip peripherals.
- */
-#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
-#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
-#define	IXP2000_UART_PHYS_BASE		0xc0030000
-#define	IXP2000_UART_VIRT_BASE		0xfef30000
-#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
-#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
-#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
-
-/*
- * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
- * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
- * entry-macro.S, so if you ever change these please propagate
- * the change.
- */
-#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
-#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
-#define	IXP2000_INTCTL_SIZE		0x00100000
-
-#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
-#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
-#define	IXP2000_PCI_CREG_SIZE		0x00100000
-
-#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
-#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
-#define	IXP2000_PCI_CSR_SIZE		0x00100000
-
-#define IXP2000_MSF_PHYS_BASE		0xc8000000
-#define IXP2000_MSF_VIRT_BASE		0xfeb00000
-#define IXP2000_MSF_SIZE		0x00100000
-
-#define IXP2000_SCRATCH_RING_PHYS_BASE	0xcb400000
-#define IXP2000_SCRATCH_RING_VIRT_BASE	0xfea00000
-#define IXP2000_SCRATCH_RING_SIZE	0x00100000
-
-#define IXP2000_SRAM0_PHYS_BASE		0x80000000
-#define IXP2000_SRAM0_VIRT_BASE		0xfe900000
-#define IXP2000_SRAM0_SIZE		0x00100000
-
-#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
-#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
-#define IXP2000_PCI_IO_SIZE     	0x01000000
-
-#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
-#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
-#define IXP2000_PCI_CFG0_SIZE   	0x01000000
-
-#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
-#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
-#define IXP2000_PCI_CFG1_SIZE		0x01000000
-
-/* 
- * Timers
- */
-#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
-/* Timer control */
-#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
-#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
-#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
-#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
-/* Store initial value */
-#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
-#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
-#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
-#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
-/* Read current value */
-#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
-#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
-#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
-#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
-/* Clear associated timer interrupt */
-#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
-#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
-#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
-#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
-/* Timer watchdog enable for T4 */
-#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
-
-#define	WDT_ENABLE			0x00000001
-#define	TIMER_DIVIDER_256		0x00000008
-#define	TIMER_ENABLE			0x00000080
-#define	IRQ_MASK_TIMER1         	(1 << 4)
-
-/*
- * Interrupt controller registers
- */
-#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
-#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
-#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
-#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
-#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
-#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
-#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
-#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
-#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
-#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
-#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
-#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
-#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
-#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
-#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
-#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
-
-/*
- * Mask of valid IRQs in the 32-bit IRQ register. We use
- * this to mark certain IRQs as being invalid.
- */
-#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
-
-/*
- * PCI config register access from core
- */
-#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
-#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
-#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
-#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
-#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
-
-/*
- * PCI CSRs
- */
-#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
-
-/*
- * PCI outbound interrupts
- */
-#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
-#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
-/*
- * PCI communications
- */
-#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
-#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
-#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
-#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
-#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
-#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
-#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
-#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
-
-/*
- * DMA engines
- */
-#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
-#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
-#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
-#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
-#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
-#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
-#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
-#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
-#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
-#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
-#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
-#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
-#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
-#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
-#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
-#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
-#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
-#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
-#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
-/*
- * Size masks for BARs
- */
-#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
-#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
-/*
- * Control and uEngine related
- */
-#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
-#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
-#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
-#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
-#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
-#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
-/*
- * Inbound PCI interrupt control
- */
-#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
-#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
-
-#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
-#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
-
-/* These are from the IRQ register in the PCI ISR register */
-#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
-#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
-#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
-#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
-#define PCI_CONTROL_IEE			(1 << 17)	/* I/O cycle Endian swap Enable */
-
-#define IXP2000_PCI_RST_REL		(1 << 2)
-#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
-#define CFG_PCI_BOOT_HOST		(1 << 2)
-#define CFG_BOOT_PROM			(1 << 1)
-
-/*
- * SlowPort CSRs
- *
- * The slowport is used to access things like flash, SONET framer control
- * ports, slave microprocessors, CPLDs, and others of chip memory mapped
- * peripherals.
- */
-#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
-
-#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
-#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
-#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
-#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
-#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
-#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
-#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
-#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
-#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
-#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
-#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
-
-/*
- * CCR values.  
- * The CCR configures the clock division for the slowport interface.
- */
-#define	SLOWPORT_CCR_DIV_1		0x00
-#define	SLOWPORT_CCR_DIV_2		0x01
-#define	SLOWPORT_CCR_DIV_4		0x02
-#define	SLOWPORT_CCR_DIV_6		0x03
-#define	SLOWPORT_CCR_DIV_8		0x04
-#define	SLOWPORT_CCR_DIV_10		0x05
-#define	SLOWPORT_CCR_DIV_12		0x06
-#define	SLOWPORT_CCR_DIV_14		0x07
-#define	SLOWPORT_CCR_DIV_16		0x08
-#define	SLOWPORT_CCR_DIV_18		0x09
-#define	SLOWPORT_CCR_DIV_20		0x0a
-#define	SLOWPORT_CCR_DIV_22		0x0b
-#define	SLOWPORT_CCR_DIV_24		0x0c
-#define	SLOWPORT_CCR_DIV_26		0x0d
-#define	SLOWPORT_CCR_DIV_28		0x0e
-#define	SLOWPORT_CCR_DIV_30		0x0f
-
-/*
- * PCR values.  PCR configure the mode of the interface.
- */
-#define	SLOWPORT_MODE_FLASH		0x00
-#define	SLOWPORT_MODE_LUCENT		0x01
-#define	SLOWPORT_MODE_PMC_SIERRA	0x02
-#define	SLOWPORT_MODE_INTEL_UP		0x03
-#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
-
-/*
- * ADC values.  Defines data and address bus widths.
- */
-#define	SLOWPORT_ADDR_WIDTH_8		0x00
-#define	SLOWPORT_ADDR_WIDTH_16		0x01
-#define	SLOWPORT_ADDR_WIDTH_24		0x02
-#define	SLOWPORT_ADDR_WIDTH_32		0x03
-#define	SLOWPORT_DATA_WIDTH_8		0x00
-#define	SLOWPORT_DATA_WIDTH_16		0x10
-#define	SLOWPORT_DATA_WIDTH_24		0x20
-#define	SLOWPORT_DATA_WIDTH_32		0x30
-
-/*
- * Masks and shifts for various fields in the WTC and RTC registers.
- */
-#define	SLOWPORT_WRTC_MASK_HD		0x0003
-#define	SLOWPORT_WRTC_MASK_PW		0x003c
-#define	SLOWPORT_WRTC_MASK_SU		0x03c0
-
-#define	SLOWPORT_WRTC_SHIFT_HD		0x00
-#define	SLOWPORT_WRTC_SHIFT_SU		0x02
-#define	SLOWPORT_WRTC_SHFIT_PW		0x06
-
-
-/*
- * GPIO registers & GPIO interface.
- */
-#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
-#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
-#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
-#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
-#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
-#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
-#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
-#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
-#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
-#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
-#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
-#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
-#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
-#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
-#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
-#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
-#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
-#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
-
-/*
- * "Global" registers...whatever that's supposed to mean.
- */
-#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
-#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
-
-#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
-#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
-#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
-#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
-#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
-#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
-#define IXP2000_MAJ_REV_MASK	      	0x000000F0
-#define IXP2000_MIN_REV_MASK	      	0x0000000F
-#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
-
-#define IXP2000_PRODUCT_ID		GLOBAL_REG(0x00)
-#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
-#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
-#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
-#define IXP2000_RESET1      		GLOBAL_REG(0x10)
-#define IXP2000_CCR            		GLOBAL_REG(0x14)
-#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
-
-#define	RSTALL				(1 << 16)
-#define	WDT_RESET_ENABLE		0x01000000
-
-
-/*
- * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
- * units, but the registers that differ between the two don't overlap,
- * so we can have one register list for both.
- */
-#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
-#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
-#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
-#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
-#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
-#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
-#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
-#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
-#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
-#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
-#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
-#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
-#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
-#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
-#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
-#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
-#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
-#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
-#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
-#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
-#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
-#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
-#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
-#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
-#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
-#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
-#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
-#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
-#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
-#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
-
-
-#endif				/* _IXP2000_H_ */
diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h
deleted file mode 100644
index 21e1de51e3f6..000000000000
--- a/include/asm-arm/arch-ixp2000/memory.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/memory.h
- *
- * Copyright (c) 2002 Intel Corp.
- * Copyright (c) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#include <asm/arch/ixp2000-regs.h>
-
-#define __virt_to_bus(v) \
-	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
-
-#define __bus_to_virt(b) \
-	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h
deleted file mode 100644
index a66317ab2071..000000000000
--- a/include/asm-arm/arch-ixp2000/platform.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-arm/arch-ixp2000/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-/*
- * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
- * XCB=101 instead, but that makes all I/O accesses bufferable.  This
- * is not a problem in general, but we do have to be slightly more
- * careful because I/O writes are no longer automatically flushed out
- * of the write buffer.
- *
- * In cases where we want to make sure that a write has been flushed
- * out of the write buffer before we proceed, for example when masking
- * a device interrupt before re-enabling IRQs in CPSR, we can use this
- * function, ixp2000_reg_wrb, which performs a write, a readback, and
- * issues a dummy instruction dependent on the value of the readback
- * (mov rX, rX) to make sure that the readback has completed before we
- * continue.
- */
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	unsigned long dummy;
-
-	*((volatile unsigned long *)reg) = val;
-
-	dummy = *((volatile unsigned long *)reg);
-	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Boards may multiplex different devices on the 2nd channel of 
- * the slowport interface that each need different configuration 
- * settings.  For example, the IXDP2400 uses channel 2 on the interface 
- * to access the CPLD, the switch fabric card, and the media card.  Each
- * one needs a different mode so drivers must save/restore the mode 
- * before and after each operation.  
- *
- * acquire_slowport(&your_config);
- * ...
- * do slowport operations
- * ...
- * release_slowport();
- *
- * Note that while you have the slowport, you are holding a spinlock,
- * so your code should be written as if you explicitly acquired a lock.
- *
- * The configuration only affects device 2 on the slowport, so the
- * MTD map driver does not acquire/release the slowport.  
- */
-struct slowport_cfg {
-	unsigned long CCR;	/* Clock divide */
-	unsigned long WTC;	/* Write Timing Control */
-	unsigned long RTC;	/* Read Timing Control */
-	unsigned long PCR;	/* Protocol Control Register */
-	unsigned long ADC;	/* Address/Data Width Control */
-};
-
-
-void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
-void ixp2000_release_slowport(struct slowport_cfg *);
-
-/*
- * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
- * tweaking of addresses in the MTD driver.
- */
-static inline unsigned ixp2000_has_broken_slowport(void)
-{
-	unsigned long id = *IXP2000_PRODUCT_ID;
-	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
-				      IXP2000_MIN_PROD_TYPE_MASK);
-	return (((id_prod ==
-		  /* fixed in IXP2400-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2800-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2850-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
-}
-
-static inline unsigned int ixp2000_has_flash(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
-}
-
-static inline unsigned int ixp2000_is_pcimaster(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
-}
-
-void ixp2000_map_io(void);
-void ixp2000_uart_init(void);
-void ixp2000_init_irq(void);
-void ixp2000_init_time(unsigned long);
-unsigned long ixp2000_gettimeoffset(void);
-
-struct pci_sys_data;
-
-u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
-void ixp2000_pci_preinit(void);
-int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
-int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
-int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
-
-/*
- * Several of the IXP2000 systems have banked flash so we need to extend the
- * flash_platform_data structure with some private pointers
- */
-struct ixp2000_flash_data {
-	struct flash_platform_data *platform_data;
-	int nr_banks;
-	unsigned long (*bank_setup)(unsigned long);
-};
-
-struct ixp2000_i2c_pins {
-	unsigned long sda_pin;
-	unsigned long scl_pin;
-};
-
-
-#endif /*  !__ASSEMBLY__ */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
deleted file mode 100644
index 3cc9a04f68cb..000000000000
--- a/include/asm-arm/arch-ixp2000/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	local_irq_disable();
-
-	/*
-	 * Reset flash banking register so that we are pointing at
-	 * RedBoot bank.
-	 */
-	if (machine_is_ixdp2401()) {
-		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
-					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
-						| IXDP2X01_CPLD_FLASH_INTERN));
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
-	}
-
-	/*
-	 * On IXDP2801 we need to write this magic sequence to the CPLD
-	 * to cause a complete reset of the CPU and all external devices
-	 * and move the flash bank register back to 0.
-	 */
-	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
-		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
-		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
-		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
-		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
-	}
-
-	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/include/asm-arm/arch-ixp2000/timex.h b/include/asm-arm/arch-ixp2000/timex.h
deleted file mode 100644
index b78a183d4698..000000000000
--- a/include/asm-arm/arch-ixp2000/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/timex.h
- *
- * IXP2000 architecture timex specifications
- */
-
-
-/*
- * Default clock is 50MHz APB, but platform code can override this
- */
-#define CLOCK_TICK_RATE	50000000
-
-
diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h
deleted file mode 100644
index f66b408f363e..000000000000
--- a/include/asm-arm/arch-ixp2000/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/uncompress.h
- *
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_BASE	0xc0030000
-
-#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
-
-#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
-#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
-#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
-#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
-#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
-#define UARTLCR         PHYS(0x0c)      /* Control reg */
-#define UARTSR          PHYS(0x14)      /* Status reg */
-
-
-static inline void putc(int c)
-{
-	int j = 0x1000;
-
-	while (--j && !(*UARTSR & UART_LSR_THRE))
-		barrier();
-
-	*UARTDR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h
deleted file mode 100644
index 275136963a0c..000000000000
--- a/include/asm-arm/arch-ixp2000/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/vmalloc.h
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END	    0xfb000000
diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S
deleted file mode 100644
index 2b25e640247d..000000000000
--- a/include/asm-arm/arch-ixp23xx/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/arch/ixp23xx.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ mmu enabled?
-		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
-#ifdef __ARMEB__
-		orr	\rx, \rx, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h
deleted file mode 100644
index 2f4335e3b836..000000000000
--- a/include/asm-arm/arch-ixp23xx/dma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/dma.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S
deleted file mode 100644
index ec9dd6fc2d0f..000000000000
--- a/include/asm-arm/arch-ixp23xx/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/entry-macro.S
- */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
-		ldr	\irqnr, [\irqnr]	@ get interrupt number
-		cmp	\irqnr, #0x0		@ spurious interrupt ?
-		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
-		subne	\irqnr, \irqnr, #1	@ convert to 0 based
-
-#if 0
-		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
-		bne	1001f
-		mov	\irqnr, #IRQ_IXP23XX_INTA
-
-		ldr	\irqnr, =0xf5000030
-
-		mov	\tmp, #(1<<26)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTB
-
-		mov	\tmp, #(1<<27)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTA
-1001:
-#endif
-		.endm
diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h
deleted file mode 100644
index c0010d21a684..000000000000
--- a/include/asm-arm/arch-ixp23xx/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/hardware.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- * Copyricht (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Hardware definitions for IXP23XX based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* PCI IO info */
-#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
-#define PCIBIOS_MIN_IO		0x00000000
-#define PCIBIOS_MIN_MEM		0xe0000000
-
-#include "ixp23xx.h"
-
-#define pcibios_assign_all_busses()	0
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific headers
- */
-#include "ixdp2351.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h
deleted file mode 100644
index 66f5bafc315c..000000000000
--- a/include/asm-arm/arch-ixp23xx/io.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2003-2005 Intel Corp.
- * Copyright (C) 2005 MontaVista Software, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
-#define __mem_pci(a)	(a)
-
-#include <linux/kernel.h>	/* For BUG */
-
-static inline void __iomem *
-ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
-{
-	if (addr >= IXP23XX_PCI_MEM_START &&
-		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
-		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
-			return NULL;
-
-		return (void __iomem *)
- 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
-	}
-
-	return __arm_ioremap(addr, size, mtype);
-}
-
-static inline void
-ixp23xx_iounmap(void __iomem *addr)
-{
-	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
-	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
-		return;
-
-	__iounmap(addr);
-}
-
-#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
-#define __arch_iounmap(a)	ixp23xx_iounmap(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h
deleted file mode 100644
index 27c580898958..000000000000
--- a/include/asm-arm/arch-ixp23xx/irqs.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/irqs.h
- *
- * IRQ definitions for IXP23XX based systems
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright (C) 2003-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
-#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
-
-
-#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
-#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
-#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
-#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
-#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
-#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
-#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
-#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
-#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
-#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
-#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
-#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
-#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
-#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
-#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
-#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
-#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
-#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
-#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
-#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
-#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
-#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
-#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
-#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
-#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
-#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
-#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
-#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
-#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
-#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
-#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
-#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
-#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
-#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
-#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
-#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
-#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
-#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
-#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
-#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
-#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
-#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
-
-#define NUM_IXP23XX_RAW_IRQS		120
-
-#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
-#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
-
-#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
-
-/*
- * We default to 32 per-board IRQs. Increase this number if you need
- * more, but keep it realistic.
- */
-#define NR_IXP23XX_MACH_IRQS 		32
-
-#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
-
-#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
-
-
-/*
- * IXDP2351-specific interrupts
- */
-
-/*
- * External PCI interrupts signaled through INTB
- *
- */
-#define IXDP2351_INTB_IRQ_BASE 		0
-#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
-#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
-#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
-#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
-#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
-#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
-#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
-#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
-#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
-
-#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
-#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
-#define IXDP2351_INTB_IRQ_VALID		0x01FF
-#define IXDP2351_INTB_IRQ_NUM 		16
-
-/*
- * Other external interrupts signaled through INTA
- */
-#define IXDP2351_INTA_IRQ_BASE 		16
-#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
-#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
-#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
-#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
-#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
-#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
-#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
-#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
-#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
-#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
-#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
-#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
-#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
-#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
-
-#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
-#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
-#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
-#define IXDP2351_INTA_IRQ_NUM 		16
-
-
-/*
- * ADI RoadRunner IRQs
- */
-#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
-#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
-#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
-#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
-
-/*
- * Put new board definitions here
- */
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/include/asm-arm/arch-ixp23xx/ixdp2351.h
deleted file mode 100644
index d5e8a43d7bbd..000000000000
--- a/include/asm-arm/arch-ixp23xx/ixdp2351.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/ixdp2351.h
- *
- * Register and other defines for IXDP2351
- *
- * Copyright (c) 2002-2004 Intel Corp.
- * Copytight (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_IXDP2351_H
-#define __ASM_ARCH_IXDP2351_H
-
-/*
- * NP module memory map
- */
-#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
-#define IXDP2351_NP_PHYS_SIZE		0x00100000
-#define IXDP2351_NP_VIRT_BASE		0xeff00000
-
-#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
-#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
-
-#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
-
-#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
-
-#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
-#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
-#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
-
-/*
- * Base board module memory map
- */
-
-#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
-#define IXDP2351_BB_SIZE		0x01000000
-#define IXDP2351_BB_BASE_VIRT		(0xee000000)
-
-#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
-
-#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
-#define IXDP2351_NVRAM_SIZE		(0x20000)
-
-#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
-#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
-#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
-#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
-#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
-#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
-
-/*
- * On board CPLD registers
- */
-#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
-
-#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
-#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
-
-#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
-#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
-
-#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
-#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
-#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
-#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
-#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
-#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
-#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
-#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
-#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
-	/* Interrupt bits are defined in irqs.h */
-#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
-#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
-
-/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
-/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
-/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
-/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
-/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h
deleted file mode 100644
index 3927b1d61b17..000000000000
--- a/include/asm-arm/arch-ixp23xx/ixp23xx.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/ixp23xx.h
- *
- * Register definitions for IXP23XX
- *
- * Copyright (C) 2003-2005 Intel Corporation.
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IXP23XX_H
-#define __ASM_ARCH_IXP23XX_H
-
-/*
- * IXP2300 linux memory map:
- *
- * virt		phys		size
- * fffd0000	a0000000	64K		XSI2CPP_CSR
- * fffc0000	c4000000	4K		EXP_CFG
- * fff00000	c8000000	64K		PERIPHERAL
- * fe000000	1c0000000	16M		CAP_CSR
- * fd000000	1c8000000	16M		MSF_CSR
- * fb000000			16M		---
- * fa000000	1d8000000	32M		PCI_IO
- * f8000000	1da000000	32M		PCI_CFG
- * f6000000	1de000000	32M		PCI_CREG
- * f4000000			32M		---
- * f0000000	1e0000000	64M		PCI_MEM
- * e[c-f]000000					per-platform mappings
- */
-
-
-/****************************************************************************
- * Static mappings.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
-#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
-#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
-
-#define IXP23XX_EXP_CFG_PHYS		0xc4000000
-#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
-#define IXP23XX_EXP_CFG_SIZE		0x00001000
-
-#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
-#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
-#define IXP23XX_PERIPHERAL_SIZE		0x00010000
-
-#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
-#define IXP23XX_CAP_CSR_VIRT		0xfe000000
-#define IXP23XX_CAP_CSR_SIZE		0x01000000
-
-#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
-#define IXP23XX_MSF_CSR_VIRT		0xfd000000
-#define IXP23XX_MSF_CSR_SIZE		0x01000000
-
-#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
-#define IXP23XX_PCI_IO_VIRT		0xfa000000
-#define IXP23XX_PCI_IO_SIZE		0x02000000
-
-#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
-#define IXP23XX_PCI_CFG_VIRT		0xf8000000
-#define IXP23XX_PCI_CFG_SIZE		0x02000000
-#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
-#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
-#define IXP23XX_PCI_CREG_VIRT		0xf6000000
-#define IXP23XX_PCI_CREG_SIZE		0x02000000
-#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_MEM_START		0xe0000000
-#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
-#define IXP23XX_PCI_MEM_VIRT		0xf0000000
-#define IXP23XX_PCI_MEM_SIZE		0x04000000
-
-
-/****************************************************************************
- * XSI2CPP CSRs.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
-#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
-#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
-#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
-#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
-
-
-/****************************************************************************
- * Expansion Bus Config.
- ****************************************************************************/
-#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
-#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
-#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
-#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
-#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
-#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
-#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
-#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
-#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
-#define IXP23XX_FLASH_WRITABLE		(0x2)
-#define IXP23XX_FLASH_BUS8		(0x1)
-
-#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
-#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
-#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
-#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
-#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
-#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
-#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
-#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
-#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
-#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
-#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
-#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
-#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
-
-#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
-#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
-#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
-
-#define IXP23XX_EXP_BUS_PHYS		0x90000000
-#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
-
-#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
-#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
-#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
-#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
-#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
-#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
-#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
-#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
-
-
-/****************************************************************************
- * Peripherals.
- ****************************************************************************/
-#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
-#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
-#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
-#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
-#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
-#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
-#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
-#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
-#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
-#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
-#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
-#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
-#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
-#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
-
-#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
-#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
-#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
-#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
-#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
-#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
-#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
-#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
-#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
-#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
-#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
-#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
-#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
-#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
-
-
-/****************************************************************************
- * Interrupt controller.
- ****************************************************************************/
-#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
-#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
-#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
-#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
-#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
-#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
-#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
-#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
-#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
-#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
-#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
-#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
-#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
-#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
-#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
-#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
-#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
-#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
-
-
-/****************************************************************************
- * GPIO.
- ****************************************************************************/
-#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
-#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
-#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
-#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
-#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
-#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
-#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
-#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
-#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
-
-#define IXP23XX_GPIO_STYLE_MASK		0x7
-#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-#define IXP23XX_GPIO_STYLE_SIZE		3
-
-
-/****************************************************************************
- * Timer.
- ****************************************************************************/
-#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
-#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
-#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
-#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
-#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
-#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
-#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
-#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
-#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
-#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
-#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
-#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
-#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
-
-#define IXP23XX_TIMER_ENABLE		(1 << 0)
-#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
-/* Low order bits of reload value ignored */
-#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
-#define IXP23XX_TIMER_DISABLED		(0x0)
-#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
-#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
-#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
-#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
-#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
-
-
-/****************************************************************************
- * CAP CSRs.
- ****************************************************************************/
-#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
-#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
-#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
-#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
-#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
-#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
-#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
-
-#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
-#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
-#define IXP23XX_RST_ALL			(1 << 16)
-#define IXP23XX_RESET_PCI		(1 << 2)
-#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
-#define IXP23XX_XSCALE_RESET		(1 << 0)
-
-#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
-
-
-/****************************************************************************
- * PCI CSRs.
- ****************************************************************************/
-#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
-#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
-#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
-#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
-
-
-#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
-#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
-#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
-#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
-#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
-#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
-#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
-#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
-#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
-#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
-#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
-#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
-#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h
deleted file mode 100644
index 6d859d742d7f..000000000000
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/memory.h
- *
- * Copyright (c) 2003-2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		(0x00000000)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#ifndef __ASSEMBLY__
-#include <asm/mach-types.h>
-
-#define __virt_to_bus(v)						\
-	({ unsigned int ret;						\
-	ret = ((__virt_to_phys(v) - 0x00000000) +			\
-	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
-	ret; })
-
-#define __bus_to_virt(b)						\
-	({ unsigned int data;						\
-	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
-	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
-
-#define arch_is_coherent()	1
-
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h
deleted file mode 100644
index db8aa304c93d..000000000000
--- a/include/asm-arm/arch-ixp23xx/platform.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-struct pci_sys_data;
-
-void ixp23xx_map_io(void);
-void ixp23xx_init_irq(void);
-void ixp23xx_sys_init(void);
-int ixp23xx_pci_setup(int, struct pci_sys_data *);
-void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
-void ixp23xx_pci_slave_init(void);
-
-extern struct sys_timer ixp23xx_timer;
-
-#define IXP23XX_UART_XTAL		14745600
-
-#ifndef __ASSEMBLY__
-/*
- * Is system memory on the XSI or CPP bus?
- */
-static inline unsigned ixp23xx_cpp_boot(void)
-{
-	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
-}
-#endif
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h
deleted file mode 100644
index 925e6b0c338b..000000000000
--- a/include/asm-arm/arch-ixp23xx/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle();
-#endif
-}
-
-static inline void arch_reset(char mode)
-{
-	/* First try machine specific support */
-	if (machine_is_ixdp2351()) {
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
-		(void) *IXDP2351_CPLD_RESET1_REG;
-		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
-	}
-
-	/* Use on-chip reset capability */
-	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h
deleted file mode 100644
index f6828fdd2883..000000000000
--- a/include/asm-arm/arch-ixp23xx/time.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/time.h
- */
diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h
deleted file mode 100644
index 516f72fe6082..000000000000
--- a/include/asm-arm/arch-ixp23xx/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/timex.h
- *
- * XScale architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE 75000000
diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h
deleted file mode 100644
index 16c1110f2304..000000000000
--- a/include/asm-arm/arch-ixp23xx/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/uncompress.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/ixp23xx.h>
-#include <linux/serial_reg.h>
-
-#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
-
-static inline void putc(char c)
-{
-	int j;
-
-	for (j = 0; j < 0x1000; j++) {
-		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-
-#endif
diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h
deleted file mode 100644
index 9f2566658541..000000000000
--- a/include/asm-arm/arch-ixp23xx/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * include/asm-arm/arch-ixp23xx/vmalloc.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * NPU mappings end at 0xf0000000 and we allocate 64MB for board
- * specific static I/O.
- */
-
-#define VMALLOC_END	(0xec000000)
diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h
deleted file mode 100644
index 0dfea0ccd6ba..000000000000
--- a/include/asm-arm/arch-ixp4xx/avila.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/avila.h
- *
- * Gateworks Avila platform specific definitions
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp425.h
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#define	AVILA_SDA_PIN		7
-#define	AVILA_SCL_PIN		6
-
-/*
- * AVILA PCI IRQs
- */
-#define AVILA_PCI_MAX_DEV	4
-#define LOFT_PCI_MAX_DEV    6
-#define AVILA_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define AVILA_PCI_INTA_PIN	11
-#define AVILA_PCI_INTB_PIN	10
-#define AVILA_PCI_INTC_PIN	9
-#define AVILA_PCI_INTD_PIN	8
-
-
diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h
deleted file mode 100644
index 7ac9ba2c035c..000000000000
--- a/include/asm-arm/arch-ixp4xx/coyote.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/coyote.h
- *
- * ADI Engineering platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define	COYOTE_PCI_SLOT0_PIN	6
-#define	COYOTE_PCI_SLOT1_PIN	11
-
-#define	COYOTE_PCI_SLOT0_DEVID	14
-#define	COYOTE_PCI_SLOT1_DEVID	15
-
-#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define	COYOTE_IDE_REGION_SIZE	0x1000
-
-#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-
diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h
deleted file mode 100644
index 2fa3d6b8dbb8..000000000000
--- a/include/asm-arm/arch-ixp4xx/cpu.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/cpu.h
- *
- * IXP4XX cpu type detection
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-extern unsigned int processor_id;
-/* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE	0x69054040
-#define IXP465_PROCESSOR_ID_VALUE	0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP465_PROCESSOR_ID_VALUE)
-
-static inline u32 ixp4xx_read_feature_bits(void)
-{
-	unsigned int val = ~*IXP4XX_EXP_CFG2;
-	val &= ~IXP4XX_FEATURE_RESERVED;
-	if (!cpu_is_ixp46x())
-		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
-
-	return val;
-}
-
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
-	*IXP4XX_EXP_CFG2 = ~value;
-}
-
-#endif  /* _ASM_ARCH_CPU_H */
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
deleted file mode 100644
index 37bc8ef23e67..000000000000
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-                .macro  addruart,rx
-                mrc     p15, 0, \rx, c1, c0
-                tst     \rx, #1                 @ MMU enabled?
-                moveq   \rx, #0xc8000000
-                movne   \rx, #0xff000000
-		orrne	\rx, \rx, #0x00b00000
-                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
-						@ byte writes used - Big Endian.
-                .endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h
deleted file mode 100644
index 2c7f5327d80f..000000000000
--- a/include/asm-arm/arch-ixp4xx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/dma.h
- *
- * Copyright (C) 2001-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/device.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/hardware.h>
-
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h
deleted file mode 100644
index b7673e171abe..000000000000
--- a/include/asm-arm/arch-ixp4xx/dsmg600.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * DSM-G600 platform specific definitions
- *
- * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- *	Copyright 2004 (C) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#define DSMG600_SDA_PIN		5
-#define DSMG600_SCL_PIN		4
-
-/*
- * DSMG600 PCI IRQs
- */
-#define DSMG600_PCI_MAX_DEV	4
-#define DSMG600_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define DSMG600_PCI_INTA_PIN	11
-#define DSMG600_PCI_INTB_PIN	10
-#define DSMG600_PCI_INTC_PIN	9
-#define DSMG600_PCI_INTD_PIN	8
-#define DSMG600_PCI_INTE_PIN	7
-#define DSMG600_PCI_INTF_PIN	6
-
-/* DSM-G600 Timer Setting */
-#define DSMG600_FREQ 66000000
-
-/* Buttons */
-
-#define DSMG600_PB_GPIO		15	/* power button */
-#define DSMG600_RB_GPIO		3	/* reset button */
-
-/* Power control */
-
-#define DSMG600_PO_GPIO		2	/* power off */
-
-/* LEDs */
-
-#define DSMG600_LED_PWR_GPIO	0
-#define DSMG600_LED_WLAN_GPIO	14
diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S
deleted file mode 100644
index f144a005ed95..000000000000
--- a/include/asm-arm/arch-ixp4xx/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get interrupts
-		cmp	\irqstat, #0
-		beq	1001f				@ upper IRQ?
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		sub     \irqnr, \base, \irqnr
-		b	1002f				@ lower IRQ being
-							@ handled
-
-1001:
-		/*
-		 * IXP465/IXP435 has an upper IRQ status register
-		 */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get upper interrupts
-		mov	\irqnr, #63
-		clz	\irqstat, \irqstat
- 		cmp	\irqstat, #32
-		subne	\irqnr, \irqnr, \irqstat
-#endif
-1002:
-		.endm
-
-
diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h
deleted file mode 100644
index c0100cc7981c..000000000000
--- a/include/asm-arm/arch-ixp4xx/fsg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/fsg.h
- *
- * Freecom FSG-3 platform specific definitions
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Author: Tomasz Chmielewski <mangoo@wpkg.org>
- * Maintainers: http://www.nslu2-linux.org
- *
- * Based on coyote.h by
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#define FSG_SDA_PIN		12
-#define FSG_SCL_PIN		13
-
-/*
- * FSG PCI IRQs
- */
-#define FSG_PCI_MAX_DEV		3
-#define FSG_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define FSG_PCI_INTA_PIN	6
-#define FSG_PCI_INTB_PIN	7
-#define FSG_PCI_INTC_PIN	5
-
-/* Buttons */
-
-#define FSG_SB_GPIO		4	/* sync button */
-#define FSG_RB_GPIO		9	/* reset button */
-#define FSG_UB_GPIO		10	/* usb button */
-
-/* LEDs */
-
-#define FSG_LED_WLAN_BIT	0
-#define FSG_LED_WAN_BIT		1
-#define FSG_LED_SATA_BIT	2
-#define FSG_LED_USB_BIT		4
-#define FSG_LED_RING_BIT	5
-#define FSG_LED_SYNC_BIT	7
diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h
deleted file mode 100644
index 3a4c5b8ae9e1..000000000000
--- a/include/asm-arm/arch-ixp4xx/gpio.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/gpio.h
- *
- * IXP4XX GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
- * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_IXP4XX_GPIO_H
-#define __ASM_ARCH_IXP4XX_GPIO_H
-
-#include <asm/hardware.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	return;
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-	return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-	return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-#include <asm-generic/gpio.h>			/* cansleep wrappers */
-
-extern int gpio_to_irq(int gpio);
-extern int irq_to_gpio(int gpio);
-
-#endif
-
diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h
deleted file mode 100644
index c3069d67c00e..000000000000
--- a/include/asm-arm/arch-ixp4xx/gtwx5715.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/gtwx5715.h
- *
- * Gemtek GTWX5715 Gateway (Linksys WRV54G)
- *
- * Copyright 2004 (c) George T. Joseph
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-#include "irqs.h"
-
-#define GTWX5715_GPIO0	0
-#define GTWX5715_GPIO1	1
-#define GTWX5715_GPIO2	2
-#define GTWX5715_GPIO3	3
-#define GTWX5715_GPIO4	4
-#define GTWX5715_GPIO5	5
-#define GTWX5715_GPIO6	6
-#define GTWX5715_GPIO7	7
-#define GTWX5715_GPIO8	8
-#define GTWX5715_GPIO9	9
-#define GTWX5715_GPIO10	10
-#define GTWX5715_GPIO11	11
-#define GTWX5715_GPIO12	12
-#define GTWX5715_GPIO13	13
-#define GTWX5715_GPIO14	14
-
-#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0
-#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1
-#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2
-#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3
-#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4
-#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5
-#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6
-#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7
-#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8
-#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9
-#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10
-#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11
-#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12
-#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
-#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
-
-/* PCI controller GPIO to IRQ pin mappings
-
-			INTA	INTB
-SLOT 0	10		11
-SLOT 1	11		10
-
-*/
-
-#define	GTWX5715_PCI_SLOT0_DEVID	0
-#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10
-#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11
-#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ
-#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ
-
-#define	GTWX5715_PCI_SLOT1_DEVID	1
-#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11
-#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10
-#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ
-#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ
-
-#define GTWX5715_PCI_SLOT_COUNT			2
-#define GTWX5715_PCI_INT_PIN_COUNT		2
-
-/*
- * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
- * and operate as an SPI type interface.  The details of the interface
- * are available on Kendin/Micrel's web site.
- */
-
-#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5
-#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6
-#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7
-#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12
-
-/*
- * The "reset" button is wired to GPIO 3.
- * The GPIO is brought "low" when the button is pushed.
- */
-
-#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3
-#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ
-
-/*
- *  Board Label      Front Label
- *  LED1             Power
- *  LED2             Wireless-G
- *  LED3             not populated but could be
- *  LED4             Internet
- *  LED5 - LED8      Controlled by KS8995M Switch
- *  LED9             DMZ
- */
-
-#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2
-#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9
-#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8
-#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1
-#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
deleted file mode 100644
index fa723a627854..000000000000
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/hardware.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
-
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define	HAVE_ARCH_PCI_SET_DMA_MASK
-
-#define pcibios_assign_all_busses()	1
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <asm/arch/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-/* Platform specific details */
-#include "ixdp425.h"
-#include "avila.h"
-#include "coyote.h"
-#include "prpmc1100.h"
-#include "nslu2.h"
-#include "nas100d.h"
-#include "dsmg600.h"
-#include "fsg.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
deleted file mode 100644
index de181ce958db..000000000000
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff0000
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
- *    To access PCI via this space, we simply ioremap() the BAR
- *    into the kernel and we can use the standard read[bwl]/write[bwl]
- *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be 
- *    problamatic if using video cards and other memory-heavy
- *    targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can be configured
- *    to use indirect registers to access PCI (as we do below for I/O
- *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
- *    of memory on the bus. The disadvantage of this is that every 
- *    PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition,
- *    you cannot mmap() PCI devices in this case.
- *
- */
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-
-#define __mem_pci(a)		(a)
-
-#else
-
-#include <linux/mm.h>
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the 
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-static inline void __iomem *
-__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
-{
-	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
-		return __arm_ioremap(addr, size, mtype);
-
-	return (void __iomem *)addr;
-}
-
-static inline void
-__ixp4xx_iounmap(void __iomem *addr)
-{
-	if ((__force u32)addr >= VMALLOC_START)
-		__iounmap(addr);
-}
-
-#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
-#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
-
-#define	writeb(v, p)			__ixp4xx_writeb(v, p)
-#define	writew(v, p)			__ixp4xx_writew(v, p)
-#define	writel(v, p)			__ixp4xx_writel(v, p)
-
-#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
-#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
-#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
-	
-#define	readb(p)			__ixp4xx_readb(p)
-#define	readw(p)			__ixp4xx_readw(p)
-#define	readl(p)			__ixp4xx_readl(p)
-	
-#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
-#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
-#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
-
-static inline void 
-__ixp4xx_writeb(u8 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START) {
-		__raw_writeb(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
-{
-	while (count--)
-		writeb(*vaddr++, bus_addr);
-}
-
-static inline void 
-__ixp4xx_writew(u16 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START) {
-		__raw_writew(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void
-__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
-{
-	while (count--)
-		writew(*vaddr++, bus_addr);
-}
-
-static inline void 
-__ixp4xx_writel(u32 value, volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	if (addr >= VMALLOC_START) {
-		__raw_writel(value, p);
-		return;
-	}
-
-	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void
-__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
-{
-	while (count--)
-		writel(*vaddr++, bus_addr);
-}
-
-static inline unsigned char 
-__ixp4xx_readb(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readb(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void
-__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readb(bus_addr);
-}
-
-static inline unsigned short 
-__ixp4xx_readw(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readw(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void 
-__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readw(bus_addr);
-}
-
-static inline unsigned long 
-__ixp4xx_readl(const volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	u32 data;
-
-	if (addr >= VMALLOC_START)
-		return __raw_readl(p);
-
-	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void 
-__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l)		_memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
-
-#endif
-
-#ifndef CONFIG_PCI
-
-#define	__io(v)		v
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window.  Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction.  This means that we need to override the default
- * I/O functions.
- */
-#define	outb(p, v)			__ixp4xx_outb(p, v)
-#define	outw(p, v)			__ixp4xx_outw(p, v)
-#define	outl(p, v)			__ixp4xx_outl(p, v)
-	
-#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
-#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
-#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
-
-#define	inb(p)				__ixp4xx_inb(p)
-#define	inw(p)				__ixp4xx_inw(p)
-#define	inl(p)				__ixp4xx_inl(p)
-
-#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
-#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
-#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
-
-
-static inline void 
-__ixp4xx_outb(u8 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void 
-__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
-{
-	while (count--)
-		outb(*vaddr++, io_addr);
-}
-
-static inline void 
-__ixp4xx_outw(u16 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void 
-__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
-{
-	while (count--)
-		outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-static inline void 
-__ixp4xx_outl(u32 value, u32 addr)
-{
-	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-static inline void 
-__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
-{
-	while (count--)
-		outl(*vaddr++, io_addr);
-}
-
-static inline u8 
-__ixp4xx_inb(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void 
-__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = inb(io_addr);
-}
-
-static inline u16 
-__ixp4xx_inw(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void 
-__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-static inline u32 
-__ixp4xx_inl(u32 addr)
-{
-	u32 data;
-	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void 
-__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = inl(io_addr);
-}
-
-#define PIO_OFFSET      0x10000UL
-#define PIO_MASK        0x0ffffUL
-
-#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
-					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-static inline unsigned int
-__ixp4xx_ioread8(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(port);
-#else
-		return (unsigned int)__ixp4xx_readb(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsb(addr, vaddr, count);
-#else
-		__ixp4xx_readsb(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread16(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu(__raw_readw((u32)port));
-#else
-		return (unsigned int)__ixp4xx_readw(addr);
-#endif
-}
-
-static inline void
-__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsw(addr, vaddr, count);
-#else
-		__ixp4xx_readsw(addr, vaddr, count);
-#endif
-}
-
-static inline unsigned int
-__ixp4xx_ioread32(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
-	else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
-		return (unsigned int)__ixp4xx_readl(addr);
-#endif
-	}
-}
-
-static inline void
-__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsl(addr, vaddr, count);
-#else
-		__ixp4xx_readsl(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8(u8 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outb(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, port);
-#else
-		__ixp4xx_writeb(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesb(addr, vaddr, count);
-#else
-		__ixp4xx_writesb(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16(u16 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outw(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writew(cpu_to_le16(value), addr);
-#else
-		__ixp4xx_writew(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesw(addr, vaddr, count);
-#else
-		__ixp4xx_writesw(addr, vaddr, count);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32(u32 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outl(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
-		__ixp4xx_writel(value, addr);
-#endif
-}
-
-static inline void
-__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesl(addr, vaddr, count);
-#else
-		__ixp4xx_writesl(addr, vaddr, count);
-#endif
-}
-
-#define	ioread8(p)			__ixp4xx_ioread8(p)
-#define	ioread16(p)			__ixp4xx_ioread16(p)
-#define	ioread32(p)			__ixp4xx_ioread32(p)
-
-#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
-#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
-#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
-
-#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
-#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
-#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
-
-#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
-#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
-#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
-
-#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
-#define	ioport_unmap(addr)
-#endif	// !CONFIG_PCI
-
-#endif	//  __ASM_ARM_ARCH_IO_H
-
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
deleted file mode 100644
index 674af4a84147..000000000000
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-
-#define IRQ_IXP4XX_NPEA		0
-#define IRQ_IXP4XX_NPEB		1
-#define IRQ_IXP4XX_NPEC		2
-#define IRQ_IXP4XX_QM1		3
-#define IRQ_IXP4XX_QM2		4
-#define IRQ_IXP4XX_TIMER1	5
-#define IRQ_IXP4XX_GPIO0	6
-#define IRQ_IXP4XX_GPIO1	7
-#define IRQ_IXP4XX_PCI_INT	8
-#define IRQ_IXP4XX_PCI_DMA1	9
-#define IRQ_IXP4XX_PCI_DMA2	10
-#define IRQ_IXP4XX_TIMER2	11
-#define IRQ_IXP4XX_USB		12
-#define IRQ_IXP4XX_UART2	13
-#define IRQ_IXP4XX_TIMESTAMP	14
-#define IRQ_IXP4XX_UART1	15
-#define IRQ_IXP4XX_WDOG		16
-#define IRQ_IXP4XX_AHB_PMU	17
-#define IRQ_IXP4XX_XSCALE_PMU	18
-#define IRQ_IXP4XX_GPIO2	19
-#define IRQ_IXP4XX_GPIO3	20
-#define IRQ_IXP4XX_GPIO4	21
-#define IRQ_IXP4XX_GPIO5	22
-#define IRQ_IXP4XX_GPIO6	23
-#define IRQ_IXP4XX_GPIO7	24
-#define IRQ_IXP4XX_GPIO8	25
-#define IRQ_IXP4XX_GPIO9	26
-#define IRQ_IXP4XX_GPIO10	27
-#define IRQ_IXP4XX_GPIO11	28
-#define IRQ_IXP4XX_GPIO12	29
-#define IRQ_IXP4XX_SW_INT1	30
-#define IRQ_IXP4XX_SW_INT2	31
-#define IRQ_IXP4XX_USB_HOST	32
-#define IRQ_IXP4XX_I2C		33
-#define IRQ_IXP4XX_SSP		34
-#define IRQ_IXP4XX_TSYNC	35
-#define IRQ_IXP4XX_EAU_DONE	36
-#define IRQ_IXP4XX_SHA_DONE	37
-#define IRQ_IXP4XX_SWCP_PE	58
-#define IRQ_IXP4XX_QM_PE	60
-#define IRQ_IXP4XX_MCU_ECC	61
-#define IRQ_IXP4XX_EXP_PE	62
-
-/*
- * Only first 32 sources are valid if running on IXP42x systems
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-#define NR_IRQS			64
-#else
-#define NR_IRQS			32
-#endif
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-/*
- * IXDP425 board IRQs
- */
-#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * Gateworks Avila board IRQs
- */
-#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-
-/*
- * PrPMC1100 Board IRQs
- */
-#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * ADI Coyote Board IRQs
- */
-#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
-#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
-#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-/*
- * NSLU2 board IRQs
- */
-#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-
-/*
- * NAS100D board IRQs
- */
-#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
-
-/*
- * D-Link DSM-G600 RevA board IRQs
- */
-#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
-#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
-
-/*
- * Freecom FSG-3 Board IRQs
- */
-#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
-#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
-#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h
deleted file mode 100644
index e0791af3bfea..000000000000
--- a/include/asm-arm/arch-ixp4xx/ixdp425.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/ixdp425.h
- *
- * IXDP425 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#define	IXDP425_SDA_PIN		7
-#define	IXDP425_SCL_PIN		6
-
-/*
- * IXDP425 PCI IRQs
- */
-#define IXDP425_PCI_MAX_DEV	4
-#define IXDP425_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define IXDP425_PCI_INTA_PIN	11
-#define IXDP425_PCI_INTB_PIN	10
-#define	IXDP425_PCI_INTC_PIN	9
-#define	IXDP425_PCI_INTD_PIN	8
-
-/* NAND Flash pins */
-#define	IXDP425_NAND_NCE_PIN	12
-
-#define	IXDP425_NAND_CMD_BYTE	0x01
-#define	IXDP425_NAND_ADDR_BYTE	0x02
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
deleted file mode 100644
index 68aca8554f5a..000000000000
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains 
- * register location and bit definitions only. Platform specific 
- * definitions and helper function declarations are in platform.h 
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy		Size		Virt		Description
- * =========================================================================
- *
- * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
- *
- * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
- *
- * 0x50000000	0x10000000	ioremap'd	EXP BUS
- *
- * 0x6000000	0x00004000	ioremap'd	QMgr
- *
- * 0xC0000000	0x00001000	0xffbff000	PCI CFG
- *
- * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
- *
- * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
-
-/*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
- */
-#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
-#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
-
-#define IXP4XX_EXP_CS0_OFFSET	0x00
-#define IXP4XX_EXP_CS1_OFFSET   0x04
-#define IXP4XX_EXP_CS2_OFFSET   0x08
-#define IXP4XX_EXP_CS3_OFFSET   0x0C
-#define IXP4XX_EXP_CS4_OFFSET   0x10
-#define IXP4XX_EXP_CS5_OFFSET   0x14
-#define IXP4XX_EXP_CS6_OFFSET   0x18
-#define IXP4XX_EXP_CS7_OFFSET   0x1C
-#define IXP4XX_EXP_CFG0_OFFSET	0x20
-#define IXP4XX_EXP_CFG1_OFFSET	0x24
-#define IXP4XX_EXP_CFG2_OFFSET	0x28
-#define IXP4XX_EXP_CFG3_OFFSET	0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
-#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
-#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
-#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
-#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
-#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
-#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
-#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
-#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access  Interrupt Controller registers
- */
-#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
-#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
-#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
-#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
-#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
-#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
-#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
-
-/*
- * IXP465-only
- */
-#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
-#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
-#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
-#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
-#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
-#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
-
-
-/*
- * Interrupt Controller Register Definitions.
- */
-
-#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
-
-#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
-#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
-#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
-#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
-#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
-#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
-#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
-#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
-#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
-#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
-#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
-#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
-#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
-#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
-                                                                                
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
-#define IXP4XX_GPIO_GPOER_OFFSET        0x04
-#define IXP4XX_GPIO_GPINR_OFFSET        0x08
-#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
-#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
-#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
-#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
-#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
-
-/* 
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
-
-#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
-#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
-#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
-#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
-#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
-#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
-#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
-#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
-
-/*
- * GPIO register bit definitions
- */
-
-/* Interrupt styles
- */
-#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-/* 
- * Mask used to clear interrupt styles 
- */
-#define IXP4XX_GPIO_STYLE_CLEAR		0x7
-#define IXP4XX_GPIO_STYLE_SIZE		3
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions 
- */
-#define IXP4XX_OST_ENABLE		0x00000001
-#define IXP4XX_OST_ONE_SHOT		0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK		0x00000003
-#define IXP4XX_OST_DISABLED		0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
-
-#define	IXP4XX_WDT_KEY			0x0000482E
-
-#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
-#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
-#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET            0x00
-#define PCI_NP_CBE_OFFSET           0x04
-#define PCI_NP_WDATA_OFFSET         0x08
-#define PCI_NP_RDATA_OFFSET         0x0c
-#define PCI_CRP_AD_CBE_OFFSET       0x10
-#define PCI_CRP_WDATA_OFFSET        0x14
-#define PCI_CRP_RDATA_OFFSET        0x18
-#define PCI_CSR_OFFSET              0x1c
-#define PCI_ISR_OFFSET              0x20
-#define PCI_INTEN_OFFSET            0x24
-#define PCI_DMACTRL_OFFSET          0x28
-#define PCI_AHBMEMBASE_OFFSET       0x2c
-#define PCI_AHBIOBASE_OFFSET        0x30
-#define PCI_PCIMEMBASE_OFFSET       0x34
-#define PCI_AHBDOORBELL_OFFSET      0x38
-#define PCI_PCIDOORBELL_OFFSET      0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
-#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions 
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST    	0x00000001
-#define PCI_CSR_ARBEN   	0x00000002
-#define PCI_CSR_ADS     	0x00000004
-#define PCI_CSR_PDS     	0x00000008
-#define PCI_CSR_ABE     	0x00000010
-#define PCI_CSR_DBT     	0x00000020
-#define PCI_CSR_ASE     	0x00000100
-#define PCI_CSR_IC      	0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE     	0x00000001
-#define PCI_ISR_PFE     	0x00000002
-#define PCI_ISR_PPE     	0x00000004
-#define PCI_ISR_AHBE    	0x00000008
-#define PCI_ISR_APDC    	0x00000010
-#define PCI_ISR_PADC    	0x00000020
-#define PCI_ISR_ADB     	0x00000040
-#define PCI_ISR_PDB     	0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE   	0x00000001
-#define PCI_INTEN_PFE   	0x00000002
-#define PCI_INTEN_PPE   	0x00000004
-#define PCI_INTEN_AHBE  	0x00000008
-#define PCI_INTEN_APDC  	0x00000010
-#define PCI_INTEN_PADC  	0x00000020
-#define PCI_INTEN_ADB   	0x00000040
-#define PCI_INTEN_PDB   	0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL		4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD			0x2
-#define NP_CMD_IOWRITE			0x3
-#define NP_CMD_CONFIGREAD		0xa
-#define NP_CMD_CONFIGWRITE		0xb
-#define NP_CMD_MEMREAD			0x6
-#define	NP_CMD_MEMWRITE			0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL         20
-#define CRP_AD_CBE_WRITE	0x00010000
-
-
-/*
- * USB Device Controller
- *
- * These are used by the USB gadget driver, so they don't follow the
- * IXP4XX_ naming convetions.
- *
- */
-# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
-
-/* UDC Undocumented - Reserved1 */
-#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
-/* UDC Undocumented - Reserved2 */
-#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
-/* UDC Undocumented - Reserved3 */
-#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
-/* UDC Control Register */
-#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
-/* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
-/* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
-/* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
-/* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
-/* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
-/* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
-/* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
-/* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
-/* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
-/* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
-/* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
-/* UDC Endpoint 11 (IN) Control/Status Register */
-#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
-/* UDC Endpoint 12 (OUT) Control/Status Register */
-#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
-/* UDC Endpoint 13 (IN) Control/Status Register */
-#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
-/* UDC Endpoint 14 (OUT) Control/Status Register */
-#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
-/* UDC Endpoint 15 (Interrupt) Control/Status Register */
-#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
-/* UDC Frame Number Register High */
-#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
-/* UDC Frame Number Register Low */
-#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
-/* UDC Byte Count Reg 2 */
-#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
-/* UDC Byte Count Reg 4 */
-#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
-/* UDC Byte Count Reg 7 */
-#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
-/* UDC Byte Count Reg 9 */
-#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
-/* UDC Byte Count Reg 12 */
-#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
-/* UDC Byte Count Reg 14 */
-#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
-/* UDC Endpoint 0 Data Register */
-#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
-/* UDC Endpoint 1 Data Register */
-#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
-/* UDC Endpoint 2 Data Register */
-#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
-/* UDC Endpoint 3 Data Register */
-#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
-/* UDC Endpoint 4 Data Register */
-#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
-/* UDC Endpoint 5 Data Register */
-#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
-/* UDC Endpoint 6 Data Register */
-#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
-/* UDC Endpoint 7 Data Register */
-#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
-/* UDC Endpoint 8 Data Register */
-#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
-/* UDC Endpoint 9 Data Register */
-#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
-/* UDC Endpoint 10 Data Register */
-#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
-/* UDC Endpoint 11 Data Register */
-#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
-/* UDC Endpoint 12 Data Register */
-#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
-/* UDC Endpoint 13 Data Register */
-#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
-/* UDC Endpoint 14 Data Register */
-#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
-/* UDC Endpoint 15 Data Register */
-#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
-/* UDC Interrupt Control Register 0 */
-#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
-/* UDC Interrupt Control Register 1 */
-#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
-/* UDC Status Interrupt Register 0 */
-#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
-/* UDC Status Interrupt Register 1 */
-#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
-
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/* "fuse" bits of IXP_EXP_CFG2 */
-#define IXP4XX_FEATURE_RCOMP		(1 << 0)
-#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
-#define IXP4XX_FEATURE_HASH		(1 << 2)
-#define IXP4XX_FEATURE_AES		(1 << 3)
-#define IXP4XX_FEATURE_DES		(1 << 4)
-#define IXP4XX_FEATURE_HDLC		(1 << 5)
-#define IXP4XX_FEATURE_AAL		(1 << 6)
-#define IXP4XX_FEATURE_HSS		(1 << 7)
-#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
-#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
-#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
-#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
-#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
-#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
-#define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
-#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
-#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
-#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
-#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
-#define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
-				    IXP4XX_FEATURE_USB_HOST |		\
-				    IXP4XX_FEATURE_NPEA_ETH |		\
-				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
-				    IXP4XX_FEATURE_RSA |		\
-				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
deleted file mode 100644
index af9667b57ab3..000000000000
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	ixp4xx_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD (SZ_64M - 1)
-
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * These are dummies for now.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h
deleted file mode 100644
index 98d937897bce..000000000000
--- a/include/asm-arm/arch-ixp4xx/nas100d.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/nas100d.h
- *
- * NAS100D platform specific definitions
- *
- * Copyright (c) 2005 Tower Technologies
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- *	Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#define NAS100D_SDA_PIN		5
-#define NAS100D_SCL_PIN		6
-
-/*
- * NAS100D PCI IRQs
- */
-#define NAS100D_PCI_MAX_DEV	3
-#define NAS100D_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NAS100D_PCI_INTA_PIN	11
-#define NAS100D_PCI_INTB_PIN	10
-#define NAS100D_PCI_INTC_PIN	9
-#define NAS100D_PCI_INTD_PIN	8
-#define NAS100D_PCI_INTE_PIN	7
-
-/* Buttons */
-
-#define NAS100D_PB_GPIO         14   /* power button */
-#define NAS100D_RB_GPIO         4    /* reset button */
-
-/* Power control */
-
-#define NAS100D_PO_GPIO         12   /* power off */
-
-/* LEDs */
-
-#define NAS100D_LED_WLAN_GPIO	0
-#define NAS100D_LED_DISK_GPIO	3
-#define NAS100D_LED_PWR_GPIO	15
diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/arch-ixp4xx/npe.h
deleted file mode 100644
index 37d0511689dc..000000000000
--- a/include/asm-arm/arch-ixp4xx/npe.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __IXP4XX_NPE_H
-#define __IXP4XX_NPE_H
-
-#include <linux/kernel.h>
-
-extern const char *npe_names[];
-
-struct npe_regs {
-	u32 exec_addr, exec_data, exec_status_cmd, exec_count;
-	u32 action_points[4];
-	u32 watchpoint_fifo, watch_count;
-	u32 profile_count;
-	u32 messaging_status, messaging_control;
-	u32 mailbox_status, /*messaging_*/ in_out_fifo;
-};
-
-struct npe {
-	struct resource *mem_res;
-	struct npe_regs __iomem *regs;
-	u32 regs_phys;
-	int id;
-	int valid;
-};
-
-
-static inline const char *npe_name(struct npe *npe)
-{
-	return npe_names[npe->id];
-}
-
-int npe_running(struct npe *npe);
-int npe_send_message(struct npe *npe, const void *msg, const char *what);
-int npe_recv_message(struct npe *npe, void *msg, const char *what);
-int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
-int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
-struct npe *npe_request(int id);
-void npe_release(struct npe *npe);
-
-#endif /* __IXP4XX_NPE_H */
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
deleted file mode 100644
index 714bbc65126a..000000000000
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/nslu2.h
- *
- * NSLU2 platform specific definitions
- *
- * Author: Mark Rakes <mrakes AT mac.com>
- * Maintainers: http://www.nslu2-linux.org
- *
- * based on ixdp425.h:
- *	Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#define NSLU2_SDA_PIN		7
-#define NSLU2_SCL_PIN		6
-
-/*
- * NSLU2 PCI IRQs
- */
-#define NSLU2_PCI_MAX_DEV	3
-#define NSLU2_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NSLU2_PCI_INTA_PIN	11
-#define NSLU2_PCI_INTB_PIN	10
-#define NSLU2_PCI_INTC_PIN	9
-#define NSLU2_PCI_INTD_PIN	8
-
-/* NSLU2 Timer */
-#define NSLU2_FREQ 66000000
-
-/* Buttons */
-
-#define NSLU2_PB_GPIO		5	/* power button */
-#define NSLU2_PO_GPIO		8	/* power off */
-#define NSLU2_RB_GPIO		12	/* reset button */
-
-/* Buzzer */
-
-#define NSLU2_GPIO_BUZZ		4
-
-/* LEDs */
-
-#define NSLU2_LED_RED_GPIO	0
-#define NSLU2_LED_GRN_GPIO	1
-#define NSLU2_LED_DISK1_GPIO	3
-#define NSLU2_LED_DISK2_GPIO	2
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
deleted file mode 100644
index a1f2b5404db1..000000000000
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#ifndef	__ARMEB__
-#define	REG_OFFSET	0
-#else
-#define	REG_OFFSET	3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define	IXP4XX_EXP_BUS_BASE(region)\
-		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
-		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
-
-#define IXP4XX_FLASH_WRITABLE	(0x2)
-#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
-#define IXP4XX_UART_XTAL        	14745600
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cs0;
-	void __iomem	*cs1;
-};
-
-struct sys_timer;
-
-#define IXP4XX_ETH_NPEA		0x00
-#define IXP4XX_ETH_NPEB		0x10
-#define IXP4XX_ETH_NPEC		0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
-	u8 phy;		/* MII PHY ID, 0 - 31 */
-	u8 rxq;		/* configurable, currently 0 - 31 only */
-	u8 txreadyq;
-	u8 hwaddr[6];
-};
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
-	int (*set_clock)(int port, unsigned int clock_type);
-	int (*open)(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier));
-	void (*close)(int port, void *pdev);
-	u8 txreadyq;
-};
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-#endif // __ASSEMBLY__
-
diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h
deleted file mode 100644
index e2532ab7f48f..000000000000
--- a/include/asm-arm/arch-ixp4xx/prpmc1100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/prpmc1100.h
- *
- * Motorolla PrPMC1100 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	PRPMC1100_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
-#define	PRPMC1100_PCI_MIN_DEVID	10
-#define	PRPMC1100_PCI_MAX_DEVID	16
-#define	PRPMC1100_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define PRPMC1100_PCI_INTA_PIN	11
-#define PRPMC1100_PCI_INTB_PIN	10
-#define	PRPMC1100_PCI_INTC_PIN	9
-#define	PRPMC1100_PCI_INTD_PIN	8
-
-
diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/include/asm-arm/arch-ixp4xx/qmgr.h
deleted file mode 100644
index 1e52b95cede5..000000000000
--- a/include/asm-arm/arch-ixp4xx/qmgr.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#ifndef IXP4XX_QMGR_H
-#define IXP4XX_QMGR_H
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#define HALF_QUEUES	32
-#define QUEUES		64	/* only 32 lower queues currently supported */
-#define MAX_QUEUE_LENGTH 4	/* in dwords */
-
-#define QUEUE_STAT1_EMPTY		1 /* queue status bits */
-#define QUEUE_STAT1_NEARLY_EMPTY	2
-#define QUEUE_STAT1_NEARLY_FULL		4
-#define QUEUE_STAT1_FULL		8
-#define QUEUE_STAT2_UNDERFLOW		1
-#define QUEUE_STAT2_OVERFLOW		2
-
-#define QUEUE_WATERMARK_0_ENTRIES	0
-#define QUEUE_WATERMARK_1_ENTRY		1
-#define QUEUE_WATERMARK_2_ENTRIES	2
-#define QUEUE_WATERMARK_4_ENTRIES	3
-#define QUEUE_WATERMARK_8_ENTRIES	4
-#define QUEUE_WATERMARK_16_ENTRIES	5
-#define QUEUE_WATERMARK_32_ENTRIES	6
-#define QUEUE_WATERMARK_64_ENTRIES	7
-
-/* queue interrupt request conditions */
-#define QUEUE_IRQ_SRC_EMPTY		0
-#define QUEUE_IRQ_SRC_NEARLY_EMPTY	1
-#define QUEUE_IRQ_SRC_NEARLY_FULL	2
-#define QUEUE_IRQ_SRC_FULL		3
-#define QUEUE_IRQ_SRC_NOT_EMPTY		4
-#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY	5
-#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL	6
-#define QUEUE_IRQ_SRC_NOT_FULL		7
-
-struct qmgr_regs {
-	u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
-	u32 stat1[4];		/* 0x400 - 0x40F */
-	u32 stat2[2];		/* 0x410 - 0x417 */
-	u32 statne_h;		/* 0x418 - queue nearly empty */
-	u32 statf_h;		/* 0x41C - queue full */
-	u32 irqsrc[4];		/* 0x420 - 0x42F IRC source */
-	u32 irqen[2];		/* 0x430 - 0x437 IRQ enabled */
-	u32 irqstat[2];		/* 0x438 - 0x43F - IRQ access only */
-	u32 reserved[1776];
-	u32 sram[2048];		/* 0x2000 - 0x3FFF - config and buffer */
-};
-
-void qmgr_set_irq(unsigned int queue, int src,
-		  void (*handler)(void *pdev), void *pdev);
-void qmgr_enable_irq(unsigned int queue);
-void qmgr_disable_irq(unsigned int queue);
-
-/* request_ and release_queue() must be called from non-IRQ context */
-int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-		       unsigned int nearly_empty_watermark,
-		       unsigned int nearly_full_watermark);
-void qmgr_release_queue(unsigned int queue);
-
-
-static inline void qmgr_put_entry(unsigned int queue, u32 val)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	__raw_writel(val, &qmgr_regs->acc[queue][0]);
-}
-
-static inline u32 qmgr_get_entry(unsigned int queue)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	return __raw_readl(&qmgr_regs->acc[queue][0]);
-}
-
-static inline int qmgr_get_stat1(unsigned int queue)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
-		>> ((queue & 7) << 2)) & 0xF;
-}
-
-static inline int qmgr_get_stat2(unsigned int queue)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
-		>> ((queue & 0xF) << 1)) & 0x3;
-}
-
-static inline int qmgr_stat_empty(unsigned int queue)
-{
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
-}
-
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
-{
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
-}
-
-static inline int qmgr_stat_nearly_full(unsigned int queue)
-{
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
-}
-
-static inline int qmgr_stat_full(unsigned int queue)
-{
-	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
-}
-
-static inline int qmgr_stat_underflow(unsigned int queue)
-{
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
-}
-
-static inline int qmgr_stat_overflow(unsigned int queue)
-{
-	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h
deleted file mode 100644
index 8e1db423b1cc..000000000000
--- a/include/asm-arm/arch-ixp4xx/system.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle(0);
-#endif
-}
-
-
-static inline void arch_reset(char mode)
-{
-	if ( 1 && mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
deleted file mode 100644
index 3745e35cc030..000000000000
--- a/include/asm-arm/arch-ixp4xx/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/timex.h
- * 
- */
-
-#include <asm/hardware.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at 
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define FREQ 66666666
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
deleted file mode 100644
index dbdec36ff0d1..000000000000
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h
deleted file mode 100644
index 34ef48fe327e..000000000000
--- a/include/asm-arm/arch-ixp4xx/uncompress.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-ixp4xx/uncompress.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include "ixp4xx-regs.h"
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-static volatile u32* uart_base;
-
-static inline void putc(int c)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Some boards are using UART2 as console
-	 */
-	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-			 machine_is_gateway7001() || machine_is_wg302v2())
-		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-	else
-		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h
deleted file mode 100644
index 050d46e6b126..000000000000
--- a/include/asm-arm/arch-ixp4xx/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/vmalloc.h
- */
-#define VMALLOC_END       (0xFF000000)
-
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S
deleted file mode 100644
index f55fb8ad9ee4..000000000000
--- a/include/asm-arm/arch-kirkwood/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/kirkwood.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/include/asm-arm/arch-kirkwood/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/include/asm-arm/arch-kirkwood/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S
deleted file mode 100644
index fc6a43d9355c..000000000000
--- a/include/asm-arm/arch-kirkwood/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/kirkwood.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h
deleted file mode 100644
index e695719771a5..000000000000
--- a/include/asm-arm/arch-kirkwood/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO			0x00001000
-#define PCIBIOS_MIN_MEM			0x01000000
-#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h
deleted file mode 100644
index 0ef6e95f5d5b..000000000000
--- a/include/asm-arm/arch-kirkwood/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
-					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h
deleted file mode 100644
index 2e7b5da6335c..000000000000
--- a/include/asm-arm/arch-kirkwood/irqs.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "kirkwood.h"	/* need GPIO_MAX */
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM	0
-#define IRQ_KIRKWOOD_BRIDGE	1
-#define IRQ_KIRKWOOD_HOST2CPU	2
-#define IRQ_KIRKWOOD_CPU2HOST	3
-#define IRQ_KIRKWOOD_XOR_00	5
-#define IRQ_KIRKWOOD_XOR_01	6
-#define IRQ_KIRKWOOD_XOR_10	7
-#define IRQ_KIRKWOOD_XOR_11	8
-#define IRQ_KIRKWOOD_PCIE	9
-#define IRQ_KIRKWOOD_GE00_SUM	11
-#define IRQ_KIRKWOOD_GE01_SUM	15
-#define IRQ_KIRKWOOD_USB	19
-#define IRQ_KIRKWOOD_SATA	21
-#define IRQ_KIRKWOOD_CRYPTO	22
-#define IRQ_KIRKWOOD_SPI	23
-#define IRQ_KIRKWOOD_I2S	24
-#define IRQ_KIRKWOOD_TS_0	26
-#define IRQ_KIRKWOOD_SDIO	28
-#define IRQ_KIRKWOOD_TWSI	29
-#define IRQ_KIRKWOOD_AVB	30
-#define IRQ_KIRKWOOD_TDMI	31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0	33
-#define IRQ_KIRKWOOD_UART_1	34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
deleted file mode 100644
index bb31b315c350..000000000000
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- *  88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000	PCIe Memory space
- * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f3000000	NAND controller address window
- *
- * virt		phys		size
- * fee00000	f1000000	1M	on-chip peripheral registers
- * fef00000	f2000000	1M	PCIe I/O space
- */
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
-						* is the minimal window size
-						*/
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
-
-#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
-#define KIRKWOOD_REGS_SIZE		SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
-
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   CPU_RESET		0x00000002
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0000
-#define   IRQ_MASK_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
-#define   L2_WRITETHROUGH	0x00000010
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-
-
-#define GPIO_MAX		50
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h
deleted file mode 100644
index e5108f408ce6..000000000000
--- a/include/asm-arm/arch-kirkwood/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h
deleted file mode 100644
index 8dde7e379855..000000000000
--- a/include/asm-arm/arch-kirkwood/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/kirkwood.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h
deleted file mode 100644
index 82122e134e3c..000000000000
--- a/include/asm-arm/arch-kirkwood/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define KIRKWOOD_TCLK		166666667
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h
deleted file mode 100644
index a9062b6d7680..000000000000
--- a/include/asm-arm/arch-kirkwood/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/kirkwood.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
deleted file mode 100644
index 41852c6e77f3..000000000000
--- a/include/asm-arm/arch-kirkwood/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-kirkwood/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S
deleted file mode 100644
index cd5f2fb1f06e..000000000000
--- a/include/asm-arm/arch-ks8695/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/debug-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Debug macros
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/regs-uart.h>
-
-	.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =KS8695_UART_PA		@ physical base address
-		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
-	.endm
-
-	.macro	senduart, rd, rx
-		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
-	.endm
-
-	.macro	busyuart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
-		beq	1001b
-	.endm
-
-	.macro	waituart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
-		beq	1001b
-	.endm
diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h
deleted file mode 100644
index 7ad2c656e162..000000000000
--- a/include/asm-arm/arch-ks8695/devices.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/devices.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DEVICES_H
-#define __ASM_ARCH_DEVICES_H
-
-#include <linux/pci.h>
-
- /* Ethernet */
-extern void __init ks8695_add_device_wan(void);
-extern void __init ks8695_add_device_lan(void);
-extern void __init ks8695_add_device_hpna(void);
-
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
- /* PCI */
-#define KS8695_MODE_PCI		0
-#define KS8695_MODE_MINIPCI	1
-#define KS8695_MODE_CARDBUS	2
-
-struct ks8695_pci_cfg {
-	short mode;
-	int (*map_irq)(struct pci_dev *, u8, u8);
-};
-extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h
deleted file mode 100644
index e5159ed42a4b..000000000000
--- a/include/asm-arm/arch-ks8695/dma.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/dma.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S
deleted file mode 100644
index e34bdf85920e..000000000000
--- a/include/asm-arm/arch-ks8695/entry-macro.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/entry-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * Low-level IRQ helper macros for KS8695
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/regs-irq.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
-
-		teq	\irqstat, #0
-		beq	1001f
-
-		mov	\irqnr, #0
-
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-	.endm
diff --git a/include/asm-arm/arch-ks8695/gpio.h b/include/asm-arm/arch-ks8695/gpio.h
deleted file mode 100644
index 65ceea28607b..000000000000
--- a/include/asm-arm/arch-ks8695/gpio.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/gpio.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_GPIO_H_
-#define __ASM_ARCH_GPIO_H_
-
-#define KS8695_GPIO_0		0
-#define KS8695_GPIO_1		1
-#define KS8695_GPIO_2		2
-#define KS8695_GPIO_3		3
-#define KS8695_GPIO_4		4
-#define KS8695_GPIO_5		5
-#define KS8695_GPIO_6		6
-#define KS8695_GPIO_7		7
-#define KS8695_GPIO_8		8
-#define KS8695_GPIO_9		9
-#define KS8695_GPIO_10		10
-#define KS8695_GPIO_11		11
-#define KS8695_GPIO_12		12
-#define KS8695_GPIO_13		13
-#define KS8695_GPIO_14		14
-#define KS8695_GPIO_15		15
-
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
-/*
- * Configure the GPIO line as an input.
- */
-int __init_or_module gpio_direction_input(unsigned int pin);
-
-/*
- * Configure the GPIO line as an output, with default state.
- */
-int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
-
-/*
- * Set the state of an output GPIO line.
- */
-void gpio_set_value(unsigned int pin, unsigned int state);
-
-/*
- * Read the state of a GPIO line.
- */
-int gpio_get_value(unsigned int pin);
-
-/*
- * Map GPIO line to IRQ number.
- */
-int gpio_to_irq(unsigned int pin);
-
-/*
- * Map IRQ number to GPIO line.
- */
-int irq_to_gpio(unsigned int irq);
-
-
-#include <asm-generic/gpio.h>
-
-static inline int gpio_request(unsigned int pin, const char *label)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned int pin)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h
deleted file mode 100644
index cb732bff3288..000000000000
--- a/include/asm-arm/arch-ks8695/hardware.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/hardware.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Memory Map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical RAM address.
- */
-#define KS8695_SDRAM_PA		0x00000000
-
-
-/*
- * We map an entire MiB with the System Configuration Registers in even
- * though only 64KiB is needed. This makes it easier for use with the
- * head debug code as the initial MMU setup only deals in L1 sections.
- */
-#define KS8695_IO_PA		0x03F00000
-#define KS8695_IO_VA		0xF0000000
-#define KS8695_IO_SIZE		SZ_1M
-
-#define KS8695_PCIMEM_PA	0x60000000
-#define KS8695_PCIMEM_SIZE	SZ_512M
-
-#define KS8695_PCIIO_PA		0x80000000
-#define KS8695_PCIIO_SIZE	SZ_64K
-
-
-/*
- * PCI support
- */
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0
-#define PCIBIOS_MIN_MEM		0
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h
deleted file mode 100644
index 8edc4bd6aadf..000000000000
--- a/include/asm-arm/arch-ks8695/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/io.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h
deleted file mode 100644
index 8b1c4fe96a81..000000000000
--- a/include/asm-arm/arch-ks8695/irqs.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ks8695/irqs.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define NR_IRQS				32
-
-/*
- * IRQ definitions
- */
-#define KS8695_IRQ_COMM_RX		0
-#define KS8695_IRQ_COMM_TX		1
-#define KS8695_IRQ_EXTERN0		2
-#define KS8695_IRQ_EXTERN1		3
-#define KS8695_IRQ_EXTERN2		4
-#define KS8695_IRQ_EXTERN3		5
-#define KS8695_IRQ_TIMER0		6
-#define KS8695_IRQ_TIMER1		7
-#define KS8695_IRQ_UART_TX		8
-#define KS8695_IRQ_UART_RX		9
-#define KS8695_IRQ_UART_LINE_STATUS	10
-#define KS8695_IRQ_UART_MODEM_STATUS	11
-#define KS8695_IRQ_LAN_RX_STOP		12
-#define KS8695_IRQ_LAN_TX_STOP		13
-#define KS8695_IRQ_LAN_RX_BUF		14
-#define KS8695_IRQ_LAN_TX_BUF		15
-#define KS8695_IRQ_LAN_RX_STATUS	16
-#define KS8695_IRQ_LAN_TX_STATUS	17
-#define KS8695_IRQ_HPNA_RX_STOP		18
-#define KS8695_IRQ_HPNA_TX_STOP		19
-#define KS8695_IRQ_HPNA_RX_BUF		20
-#define KS8695_IRQ_HPNA_TX_BUF		21
-#define KS8695_IRQ_HPNA_RX_STATUS	22
-#define KS8695_IRQ_HPNA_TX_STATUS	23
-#define KS8695_IRQ_BUS_ERROR		24
-#define KS8695_IRQ_WAN_RX_STOP		25
-#define KS8695_IRQ_WAN_TX_STOP		26
-#define KS8695_IRQ_WAN_RX_BUF		27
-#define KS8695_IRQ_WAN_TX_BUF		28
-#define KS8695_IRQ_WAN_RX_STATUS	29
-#define KS8695_IRQ_WAN_TX_STATUS	30
-#define KS8695_IRQ_WAN_LINK		31
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h
deleted file mode 100644
index 24f6a6e4a302..000000000000
--- a/include/asm-arm/arch-ks8695/memory.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/memory.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 Memory definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-/*
- * Physical SRAM offset.
- */
-#define PHYS_OFFSET		KS8695_SDRAM_PA
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PCI
-
-/* PCI mappings */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
-#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
-
-/* Platform-bus mapping */
-extern struct bus_type platform_bus_type;
-#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
-#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
-					__phys_to_virt(x) : __bus_to_virt(x); })
-#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
-					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
-
-#else
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
deleted file mode 100644
index 6b95d77aea19..000000000000
--- a/include/asm-arm/arch-ks8695/regs-gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-gpio.h
- *
- * Copyright (C) 2007 Andrew Victor
- *
- * KS8695 - GPIO control registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_GPIO_H
-#define KS8695_GPIO_H
-
-#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
-#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
-#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
-
-
-#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
-#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
-#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
-
-
-/* Port Mode Register */
-#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
-
-/* Port Control Register */
-#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
-#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
-#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
-#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
-#define IOPC_IOEINT3_MODE(x)	((x) << 12)
-#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
-#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
-#define IOPC_IOEINT2_MODE(x)	((x) << 8)
-#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
-#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
-#define IOPC_IOEINT1_MODE(x)	((x) << 4)
-#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
-#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
-#define IOPC_IOEINT0_MODE(x)	((x) << 0)
-
- /* Trigger Modes */
-#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
-#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
-#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
-#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
-#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
-
-/* Port Data Register */
-#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/include/asm-arm/arch-ks8695/regs-hpna.h
deleted file mode 100644
index 14091cdec103..000000000000
--- a/include/asm-arm/arch-ks8695/regs-hpna.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - HPNA Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_HPNA_H
-#define KS8695_HPNA_H
-
-#define KS8695_HPNA_OFFSET	(0xF0000 + 0xA000)
-#define KS8695_HPNA_VA		(KS8695_IO_VA + KS8695_HPNA_OFFSET)
-#define KS8695_HPNA_PA		(KS8695_IO_PA + KS8695_HPNA_OFFSET)
-
-
-/*
- * HPNA registers
- */
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h
deleted file mode 100644
index 70b193f6b756..000000000000
--- a/include/asm-arm/arch-ks8695/regs-irq.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-irq.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - IRQ registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_IRQ_H
-#define KS8695_IRQ_H
-
-#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
-#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
-#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
-
-
-/*
- * Interrupt Controller registers
- */
-#define KS8695_INTMC		(0x00)		/* Mode Control Register */
-#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
-#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
-#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
-#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
-#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
-#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
-#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
-#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
-#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
-#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
-#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
-#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
-#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/include/asm-arm/arch-ks8695/regs-lan.h
deleted file mode 100644
index a63bd61c64ed..000000000000
--- a/include/asm-arm/arch-ks8695/regs-lan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-lan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - LAN Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_LAN_H
-#define KS8695_LAN_H
-
-#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
-#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
-#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
-
-
-/*
- * LAN registers
- */
-#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
-#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
-#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
-#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
-#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
-#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
-#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
-#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
-#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
-#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
-#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
-#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
-#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
-#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
-#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
-#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
-#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
-
-/* DMA Receive Control Register */
-#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
-#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
-#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
-#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
-#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
-#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
-#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
-#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
-#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
-#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
-#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
-
-/* Additional Station Address High */
-#define LMAAH_E			(1    << 31)	/* Address Enabled */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h
deleted file mode 100644
index 76b38e0862e6..000000000000
--- a/include/asm-arm/arch-ks8695/regs-mem.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-mem.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Memory Controller registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MEM_H
-#define KS8695_MEM_H
-
-#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
-#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
-#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
-
-
-/*
- * Memory Controller Registers
- */
-#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
-#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
-#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
-#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
-#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
-#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
-#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
-#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
-#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
-#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
-#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
-
-
-/* External I/O Access Control Registers */
-#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
-#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
-#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
-#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
-
-/* ROM/SRAM/Flash Control Register */
-#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
-#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
-#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
-#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
-#define		PMC_NORMAL		(0 << 0)
-#define		PMC_4WORD		(1 << 0)
-#define		PMC_8WORD		(2 << 0)
-#define		PMC_16WORD		(3 << 0)
-
-/* External I/O and ROM/SRAM/Flash General Register */
-#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
-#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
-#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
-#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
-#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
-#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
-
-/* SDRAM Control Register */
-#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
-#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
-#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
-
-/* SDRAM General Control Register */
-#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
-#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
-
-/* SDRAM Buffer Control Register */
-#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
-#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
-#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
-#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
-#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
-#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
-#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
-#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
-
-/* SDRAM Refresh Timer Register */
-#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/include/asm-arm/arch-ks8695/regs-misc.h
deleted file mode 100644
index 632ca6601a94..000000000000
--- a/include/asm-arm/arch-ks8695/regs-misc.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-misc.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Miscellaneous Registers
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MISC_H
-#define KS8695_MISC_H
-
-#define KS8695_MISC_OFFSET	(0xF0000 + 0xEA00)
-#define KS8695_MISC_VA		(KS8695_IO_VA + KS8695_MISC_OFFSET)
-#define KS8695_MISC_PA		(KS8695_IO_PA + KS8695_MISC_OFFSET)
-
-
-/*
- * Miscellaneous registers
- */
-#define KS8695_DID		(0x00)		/* Device ID */
-#define KS8695_RID		(0x04)		/* Revision ID */
-#define KS8695_HMC		(0x08)		/* HPNA Miscellaneous Control [KS8695 only] */
-#define KS8695_WMC		(0x0c)		/* WAN Miscellaneous Control */
-#define KS8695_WPPM		(0x10)		/* WAN PHY Power Management */
-#define KS8695_PPS		(0x1c)		/* PHY PowerSave */
-
-/* Device ID Register */
-#define DID_ID			(0xffff << 0)	/* Device ID */
-
-/* Revision ID Register */
-#define RID_SUBID		(0xf << 4)	/* Sub-Device ID */
-#define RID_REVISION		(0xf << 0)	/* Revision ID */
-
-/* HPNA Miscellaneous Control Register */
-#define HMC_HSS			(1 << 1)	/* Speed */
-#define HMC_HDS			(1 << 0)	/* Duplex */
-
-/* WAN Miscellaneous Control Register */
-#define WMC_WANC		(1 << 30)	/* Auto-negotiation complete */
-#define WMC_WANR		(1 << 29)	/* Auto-negotiation restart */
-#define WMC_WANAP		(1 << 28)	/* Advertise Pause */
-#define WMC_WANA100F		(1 << 27)	/* Advertise 100 FDX */
-#define WMC_WANA100H		(1 << 26)	/* Advertise 100 HDX */
-#define WMC_WANA10F		(1 << 25)	/* Advertise 10 FDX */
-#define WMC_WANA10H		(1 << 24)	/* Advertise 10 HDX */
-#define WMC_WLS			(1 << 23)	/* Link status */
-#define WMC_WDS			(1 << 22)	/* Duplex status */
-#define WMC_WSS			(1 << 21)	/* Speed status */
-#define WMC_WLPP		(1 << 20)	/* Link Partner Pause */
-#define WMC_WLP100F		(1 << 19)	/* Link Partner 100 FDX */
-#define WMC_WLP100H		(1 << 18)	/* Link Partner 100 HDX */
-#define WMC_WLP10F		(1 << 17)	/* Link Partner 10 FDX */
-#define WMC_WLP10H		(1 << 16)	/* Link Partner 10 HDX */
-#define WMC_WAND		(1 << 15)	/* Auto-negotiation disable */
-#define WMC_WANF100		(1 << 14)	/* Force 100 */
-#define WMC_WANFF		(1 << 13)	/* Force FDX */
-#define WMC_WLED1S		(7 <<  4)	/* LED1 Select */
-#define		WLED1S_SPEED		(0 << 4)
-#define		WLED1S_LINK		(1 << 4)
-#define		WLED1S_DUPLEX		(2 << 4)
-#define		WLED1S_COLLISION	(3 << 4)
-#define		WLED1S_ACTIVITY		(4 << 4)
-#define		WLED1S_FDX_COLLISION	(5 << 4)
-#define		WLED1S_LINK_ACTIVITY	(6 << 4)
-#define WMC_WLED0S		(7 << 0)	/* LED0 Select */
-#define		WLED0S_SPEED		(0 << 0)
-#define		WLED0S_LINK		(1 << 0)
-#define		WLED0S_DUPLEX		(2 << 0)
-#define		WLED0S_COLLISION	(3 << 0)
-#define		WLED0S_ACTIVITY		(4 << 0)
-#define		WLED0S_FDX_COLLISION	(5 << 0)
-#define		WLED0S_LINK_ACTIVITY	(6 << 0)
-
-/* WAN PHY Power Management Register */
-#define WPPM_WLPBK		(1 << 14)	/* Local Loopback */
-#define WPPM_WRLPKB		(1 << 13)	/* Remove Loopback */
-#define WPPM_WPI		(1 << 12)	/* PHY isolate */
-#define WPPM_WFL		(1 << 10)	/* Force link */
-#define WPPM_MDIXS		(1 << 9)	/* MDIX Status */
-#define WPPM_FEF		(1 << 8)	/* Far End Fault */
-#define WPPM_AMDIXP		(1 << 7)	/* Auto MDIX Parameter */
-#define WPPM_TXDIS		(1 << 6)	/* Disable transmitter */
-#define WPPM_DFEF		(1 << 5)	/* Disable Far End Fault */
-#define WPPM_PD			(1 << 4)	/* Power Down */
-#define WPPM_DMDX		(1 << 3)	/* Disable Auto MDI/MDIX */
-#define WPPM_FMDX		(1 << 2)	/* Force MDIX */
-#define WPPM_LPBK		(1 << 1)	/* MAX Loopback */
-
-/* PHY Power Save Register */
-#define PPS_PPSM		(1 << 0)	/* PHY Power Save Mode */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/include/asm-arm/arch-ks8695/regs-pci.h
deleted file mode 100644
index 286d6d488df8..000000000000
--- a/include/asm-arm/arch-ks8695/regs-pci.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-pci.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - PCI bridge registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define KS8695_PCI_OFFSET	(0xF0000 + 0x2000)
-#define KS8695_PCI_VA		(KS8695_IO_VA + KS8695_PCI_OFFSET)
-#define KS8695_PCI_PA		(KS8695_IO_PA + KS8695_PCI_OFFSET)
-
-
-#define KS8695_CRCFID		(0x000)		/* Configuration: Identification */
-#define KS8695_CRCFCS		(0x004)		/* Configuration: Command and Status */
-#define KS8695_CRCFRV		(0x008)		/* Configuration: Revision */
-#define KS8695_CRCFLT		(0x00C)		/* Configuration: Latency Timer */
-#define KS8695_CRCBMA		(0x010)		/* Configuration: Base Memory Address */
-#define KS8695_CRCSID		(0x02C)		/* Configuration: Subsystem ID */
-#define KS8695_CRCFIT		(0x03C)		/* Configuration: Interrupt */
-#define KS8695_PBCA		(0x100)		/* Bridge Configuration Address */
-#define KS8695_PBCD		(0x104)		/* Bridge Configuration Data */
-#define KS8695_PBM		(0x200)		/* Bridge Mode */
-#define KS8695_PBCS		(0x204)		/* Bridge Control and Status */
-#define KS8695_PMBA		(0x208)		/* Bridge Memory Base Address */
-#define KS8695_PMBAC		(0x20C)		/* Bridge Memory Base Address Control */
-#define KS8695_PMBAM		(0x210)		/* Bridge Memory Base Address Mask */
-#define KS8695_PMBAT		(0x214)		/* Bridge Memory Base Address Translation */
-#define KS8695_PIOBA		(0x218)		/* Bridge I/O Base Address */
-#define KS8695_PIOBAC		(0x21C)		/* Bridge I/O Base Address Control */
-#define KS8695_PIOBAM		(0x220)		/* Bridge I/O Base Address Mask */
-#define KS8695_PIOBAT		(0x224)		/* Bridge I/O Base Address Translation */
-
-
-/* Configuration: Identification */
-
-/* Configuration: Command and Status */
-
-/* Configuration: Revision */
-
-
-
-#define CFRV_GUEST		(1 << 23)
-
-#define PBCA_TYPE1		(1)
-#define PBCA_ENABLE		(1 << 31)
-
-
diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/include/asm-arm/arch-ks8695/regs-switch.h
deleted file mode 100644
index 5f37be3f2f60..000000000000
--- a/include/asm-arm/arch-ks8695/regs-switch.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-switch.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Switch Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SWITCH_H
-#define KS8695_SWITCH_H
-
-#define KS8695_SWITCH_OFFSET	(0xF0000 + 0xe800)
-#define KS8695_SWITCH_VA	(KS8695_IO_VA + KS8695_SWITCH_OFFSET)
-#define KS8695_SWITCH_PA	(KS8695_IO_PA + KS8695_SWITCH_OFFSET)
-
-
-/*
- * Switch registers
- */
-#define KS8695_SEC0		(0x00)		/* Switch Engine Control 0 */
-#define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
-#define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
-
-#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
-
-#define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
-#define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
-#define KS8695_SEIAC		(0x50)		/* Indirect Access Control */
-#define KS8695_SEIADH2		(0x54)		/* Indirect Access Data High 2 */
-#define KS8695_SEIADH1		(0x58)		/* Indirect Access Data High 1 */
-#define KS8695_SEIADL		(0x5c)		/* Indirect Access Data Low */
-#define KS8695_SEAFC		(0x60)		/* Advance Feature Control */
-#define KS8695_SEDSCPH		(0x64)		/* TOS Priority High */
-#define KS8695_SEDSCPL		(0x68)		/* TOS Priority Low */
-#define KS8695_SEMAH		(0x6c)		/* Switch Engine MAC Address High */
-#define KS8695_SEMAL		(0x70)		/* Switch Engine MAC Address Low */
-#define KS8695_LPPM12		(0x74)		/* Port 1 & 2 PHY Power Management */
-#define KS8695_LPPM34		(0x78)		/* Port 3 & 4 PHY Power Management */
-
-
-/* Switch Engine Control 0 */
-#define SEC0_LLED1S		(7 << 25)	/* LED1 Select */
-#define		LLED1S_SPEED		(0 << 25)
-#define		LLED1S_LINK		(1 << 25)
-#define		LLED1S_DUPLEX		(2 << 25)
-#define		LLED1S_COLLISION	(3 << 25)
-#define		LLED1S_ACTIVITY		(4 << 25)
-#define		LLED1S_FDX_COLLISION	(5 << 25)
-#define		LLED1S_LINK_ACTIVITY	(6 << 25)
-#define SEC0_LLED0S		(7 << 22)	/* LED0 Select */
-#define		LLED0S_SPEED		(0 << 22)
-#define		LLED0S_LINK		(1 << 22)
-#define		LLED0S_DUPLEX		(2 << 22)
-#define		LLED0S_COLLISION	(3 << 22)
-#define		LLED0S_ACTIVITY		(4 << 22)
-#define		LLED0S_FDX_COLLISION	(5 << 22)
-#define		LLED0S_LINK_ACTIVITY	(6 << 22)
-#define SEC0_ENABLE		(1 << 0)	/* Enable Switch */
-
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/include/asm-arm/arch-ks8695/regs-sys.h
deleted file mode 100644
index f3179815b8ee..000000000000
--- a/include/asm-arm/arch-ks8695/regs-sys.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-sys.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - System control registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SYS_H
-#define KS8695_SYS_H
-
-#define KS8695_SYS_OFFSET	(0xF0000 + 0x0000)
-#define KS8695_SYS_VA		(KS8695_IO_VA + KS8695_SYS_OFFSET)
-#define KS8695_SYS_PA		(KS8695_IO_PA + KS8695_SYS_OFFSET)
-
-
-#define KS8695_SYSCFG		(0x00)		/* System Configuration Register */
-#define KS8695_CLKCON		(0x04)		/* System Clock and Bus Control Register */
-
-
-/* System Configuration Register */
-#define SYSCFG_SPRBP		(0x3ff << 16)	/* Register Bank Base Pointer */
-
-/* System Clock and Bus Control Register */
-#define CLKCON_SFMODE		(1 << 8)	/* System Fast Mode for Simulation */
-#define CLKCON_SCDC		(7 << 0)	/* System Clock Divider Select */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/include/asm-arm/arch-ks8695/regs-timer.h
deleted file mode 100644
index 0a9f7f99ec52..000000000000
--- a/include/asm-arm/arch-ks8695/regs-timer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
-#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON		(0x00)		/* Timer Control Register */
-#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
-#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
-#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
-#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
-#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/include/asm-arm/arch-ks8695/regs-uart.h
deleted file mode 100644
index a27cb20502a3..000000000000
--- a/include/asm-arm/arch-ks8695/regs-uart.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ks8695/regs-uart.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - UART register and bit definitions.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef KS8695_UART_H
-#define KS8695_UART_H
-
-#define KS8695_UART_OFFSET	(0xF0000 + 0xE000)
-#define KS8695_UART_VA		(KS8695_IO_VA + KS8695_UART_OFFSET)
-#define KS8695_UART_PA		(KS8695_IO_PA + KS8695_UART_OFFSET)
-
-
-/*
- * UART registers
- */
-#define KS8695_URRB	(0x00)		/* Receive Buffer Register */
-#define KS8695_URTH	(0x04)		/* Transmit Holding Register */
-#define KS8695_URFC	(0x08)		/* FIFO Control Register */
-#define KS8695_URLC	(0x0C)		/* Line Control Register */
-#define KS8695_URMC	(0x10)		/* Modem Control Register */
-#define KS8695_URLS	(0x14)		/* Line Status Register */
-#define KS8695_URMS	(0x18)		/* Modem Status Register */
-#define KS8695_URBD	(0x1C)		/* Baud Rate Divisor Register */
-#define KS8695_USR	(0x20)		/* Status Register */
-
-
-/* FIFO Control Register */
-#define URFC_URFRT	(3 << 6)	/* Receive FIFO Trigger Level */
-#define		URFC_URFRT_1	(0 << 6)
-#define		URFC_URFRT_4	(1 << 6)
-#define		URFC_URFRT_8	(2 << 6)
-#define		URFC_URFRT_14	(3 << 6)
-#define URFC_URTFR	(1 << 2)	/* Transmit FIFO Reset */
-#define URFC_URRFR	(1 << 1)	/* Receive FIFO Reset */
-#define URFC_URFE	(1 << 0)	/* FIFO Enable */
-
-/* Line Control Register */
-#define URLC_URSBC	(1 << 6)	/* Set Break Condition */
-#define URLC_PARITY	(7 << 3)	/* Parity */
-#define		URPE_NONE	(0 << 3)
-#define		URPE_ODD	(1 << 3)
-#define		URPE_EVEN	(3 << 3)
-#define		URPE_MARK	(5 << 3)
-#define		URPE_SPACE	(7 << 3)
-#define URLC_URSB	(1 << 2)	/* Stop Bits */
-#define URLC_URCL	(3 << 0)	/* Character Length */
-#define		URCL_5		(0 << 0)
-#define		URCL_6		(1 << 0)
-#define		URCL_7		(2 << 0)
-#define		URCL_8		(3 << 0)
-
-/* Modem Control Register */
-#define URMC_URLB	(1 << 4)	/* Loop-back mode */
-#define URMC_UROUT2	(1 << 3)	/* OUT2 signal */
-#define URMC_UROUT1	(1 << 2)	/* OUT1 signal */
-#define URMC_URRTS	(1 << 1)	/* Request to Send */
-#define URMC_URDTR	(1 << 0)	/* Data Terminal Ready */
-
-/* Line Status Register */
-#define URLS_URRFE	(1 << 7)	/* Receive FIFO Error */
-#define URLS_URTE	(1 << 6)	/* Transmit Empty */
-#define URLS_URTHRE	(1 << 5)	/* Transmit Holding Register Empty */
-#define URLS_URBI	(1 << 4)	/* Break Interrupt */
-#define URLS_URFE	(1 << 3)	/* Framing Error */
-#define URLS_URPE	(1 << 2)	/* Parity Error */
-#define URLS_URROE	(1 << 1)	/* Receive Overrun Error */
-#define URLS_URDR	(1 << 0)	/* Receive Data Ready */
-
-/* Modem Status Register */
-#define URMS_URDCD	(1 << 7)	/* Data Carrier Detect */
-#define URMS_URRI	(1 << 6)	/* Ring Indicator */
-#define URMS_URDSR	(1 << 5)	/* Data Set Ready */
-#define URMS_URCTS	(1 << 4)	/* Clear to Send */
-#define URMS_URDDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define URMS_URTERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define URMS_URDDST	(1 << 1)	/* Delta Data Set Ready */
-#define URMS_URDCTS	(1 << 0)	/* Delta Clear to Send */
-
-/* Status Register */
-#define USR_UTI		(1 << 0)	/* Timeout Indication */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/include/asm-arm/arch-ks8695/regs-wan.h
deleted file mode 100644
index 52e35b0d65e4..000000000000
--- a/include/asm-arm/arch-ks8695/regs-wan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - WAN Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_WAN_H
-#define KS8695_WAN_H
-
-#define KS8695_WAN_OFFSET	(0xF0000 + 0x6000)
-#define KS8695_WAN_VA		(KS8695_IO_VA + KS8695_WAN_OFFSET)
-#define KS8695_WAN_PA		(KS8695_IO_PA + KS8695_WAN_OFFSET)
-
-
-/*
- * WAN registers
- */
-#define KS8695_WMDTXC		(0x00)		/* DMA Transmit Control */
-#define KS8695_WMDRXC		(0x04)		/* DMA Receive Control */
-#define KS8695_WMDTSC		(0x08)		/* DMA Transmit Start Command */
-#define KS8695_WMDRSC		(0x0c)		/* DMA Receive Start Command */
-#define KS8695_WTDLB		(0x10)		/* Transmit Descriptor List Base Address */
-#define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
-#define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
-#define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define WMDTXC_WMTRST		(1    << 31)	/* Soft Reset */
-#define WMDTXC_WMTBS		(0x3f << 24)	/* Transmit Burst Size */
-#define WMDTXC_WMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
-#define WMDTXC_WMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
-#define WMDTXC_WMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
-#define WMDTXC_WMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
-#define WMDTXC_WMTLB		(1    <<  8)	/* Loopback mode */
-#define WMDTXC_WMTEP		(1    <<  2)	/* Transmit Enable Padding */
-#define WMDTXC_WMTAC		(1    <<  1)	/* Transmit Add CRC */
-#define WMDTXC_WMTE		(1    <<  0)	/* TX Enable */
-
-/* DMA Receive Control Register */
-#define WMDRXC_WMRBS		(0x3f << 24)	/* Receive Burst Size */
-#define WMDRXC_WMRUCC		(1    << 18)	/* Receive UDP Checksum check */
-#define WMDRXC_WMRTCG		(1    << 17)	/* Receive TCP Checksum check */
-#define WMDRXC_WMRICG		(1    << 16)	/* Receive IP Checksum check */
-#define WMDRXC_WMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
-#define WMDRXC_WMRB		(1    <<  6)	/* Receive Broadcast */
-#define WMDRXC_WMRM		(1    <<  5)	/* Receive Multicast */
-#define WMDRXC_WMRU		(1    <<  4)	/* Receive Unicast */
-#define WMDRXC_WMRERR		(1    <<  3)	/* Receive Error Frame */
-#define WMDRXC_WMRA		(1    <<  2)	/* Receive All */
-#define WMDRXC_WMRE		(1    <<  0)	/* RX Enable */
-
-/* Additional Station Address High */
-#define WMAAH_E			(1    << 31)	/* Address Enabled */
-
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h
deleted file mode 100644
index 3bc28106d937..000000000000
--- a/include/asm-arm/arch-ks8695/system.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-timer.h>
-
-static void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks,
-	 */
-	cpu_do_idle();
-
-}
-
-static void arch_reset(char mode)
-{
-	unsigned int reg;
-
-	if (mode == 's')
-		cpu_reset(0);
-
-	/* disable timer0 */
-	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	/* enable watchdog mode */
-	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
-	/* re-enable timer0 */
-	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h
deleted file mode 100644
index 8320d528b903..000000000000
--- a/include/asm-arm/arch-ks8695/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h
deleted file mode 100644
index 733a50855b5d..000000000000
--- a/include/asm-arm/arch-ks8695/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/uncompress.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Kernel uncompressor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-#include <asm/arch/regs-uart.h>
-
-static void putc(char c)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
-		barrier();
-
-	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
-}
-
-static inline void flush(void)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
-		barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h
deleted file mode 100644
index d1d88e58117d..000000000000
--- a/include/asm-arm/arch-ks8695/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-ks8695/vmalloc.h
- *
- * Copyright (C) 2006 Ben Dooks
- * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
- *
- * KS8695 vmalloc definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h
deleted file mode 100644
index 5b4396de16a0..000000000000
--- a/include/asm-arm/arch-l7200/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   08-02-2000	SJH	Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <asm/hardware.h>
-
-#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR		0x00000000
-#define AUX_DIAG_LED_ON		0x00000002
-#define AUX_RTS_UART1		0x00000004
-#define AUX_DTR_UART1		0x00000008
-#define AUX_KBD_COLUMN_12_HIGH	0x00000010
-#define AUX_KBD_COLUMN_12_OFF	0x00000020
-#define AUX_KBD_COLUMN_13_HIGH	0x00000040
-#define AUX_KBD_COLUMN_13_OFF	0x00000080
-
-#endif
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S
deleted file mode 100644
index 846473318e8b..000000000000
--- a/include/asm-arm/arch-l7200/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-l7200/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #io_phys		@ physical base address
-		movne	\rx, #io_virt		@ virtual address
-		add	\rx, \rx, #0x00044000	@ UART1
-@		add	\rx, \rx, #0x00045000	@ UART2
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
deleted file mode 100644
index 4c7eca63f035..000000000000
--- a/include/asm-arm/arch-l7200/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/dma.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  08-29-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS         0xd0000000
-
-#define DMA_S0                  0
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S
deleted file mode 100644
index 63411d3e9df4..000000000000
--- a/include/asm-arm/arch-l7200/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-
-		.equ	irq_base_addr,	IO_BASE_2
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
-		add	\irqstat, \irqstat, #0x00001000		@ Status reg
-		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
-		mov     \irqnr, #0
-1001:		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tsteq   \irqnr, #32
-		beq     1001b
-		teq     \irqnr, #32
-		.endm
-
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h
deleted file mode 100644
index 9c4804d13578..000000000000
--- a/include/asm-arm/arch-l7200/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   07-28-2000	SJH	Created file
- *   08-02-2000	SJH	Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <asm/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
-	unsigned int TIMERLOAD;
-	unsigned int TIMERVALUE;
-	unsigned int TIMERCONTROL;
-	unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE		(IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define	GPT_PRESCALE_1		0x00000000
-#define	GPT_PRESCALE_16		0x00000004
-#define	GPT_PRESCALE_256	0x00000008
-#define GPT_MODE_FREERUN	0x00000000
-#define GPT_MODE_PERIODIC	0x00000040
-#define GPT_ENABLE		0x00000080
-#define GPT_BZTOG		0x00000100
-#define GPT_BZMOD		0x00000200
-#define GPT_LOAD_MASK 		0x0000ffff
-
-#endif
diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h
deleted file mode 100644
index 0b63e4239bdd..000000000000
--- a/include/asm-arm/arch-l7200/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- *      linux/include/asm-arm/arch-l7200/gpio.h
- *
- *      Registers and  helper functions for the L7200 Link-Up Systems
- *      GPIO.
- *
- *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF     0x000
-#define PADDR_OFF    0x004
-#define PASBSR_OFF   0x008
-#define PAEENR_OFF   0x00c
-#define PAESNR_OFF   0x010
-#define PAESTR_OFF   0x014
-#define PAIMR_OFF    0x018
-#define PAINT_OFF    0x01c
-
-#define PBDR_OFF     0x020
-#define PBDDR_OFF    0x024
-#define PBSBSR_OFF   0x028
-#define PBIMR_OFF    0x038
-#define PBINT_OFF    0x03c
-
-#define PCDR_OFF     0x040
-#define PCDDR_OFF    0x044
-#define PCSBSR_OFF   0x048
-#define PCIMR_OFF    0x058
-#define PCINT_OFF    0x05c
-
-#define PDDR_OFF     0x060
-#define PDDDR_OFF    0x064
-#define PDSBSR_OFF   0x068
-#define PDEENR_OFF   0x06c
-#define PDESNR_OFF   0x070
-#define PDESTR_OFF   0x074
-#define PDIMR_OFF    0x078
-#define PDINT_OFF    0x07c
-
-#define PEDR_OFF     0x080
-#define PEDDR_OFF    0x084
-#define PESBSR_OFF   0x088
-#define PEEENR_OFF   0x08c
-#define PEESNR_OFF   0x090
-#define PEESTR_OFF   0x094
-#define PEIMR_OFF    0x098
-#define PEINT_OFF    0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN         0x02
-#define BACKLIGHT_EN   0x04
diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h
deleted file mode 100644
index 2ab43f3a4a8d..000000000000
--- a/include/asm-arm/arch-l7200/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the 
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   02-01-2000	 RS	Created L7200 version, derived from rpc code
- *   03-21-2000	SJH	Cleaned up file
- *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
- *   04-25-2000	SJH	Removed unused symbols and such
- *   05-05-2000	SJH	Complete rewrite
- *   07-31-2000	SJH	Added undocumented debug auxillary port to
- *			get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START		0xf0000000
-#define RAM_SIZE		0x02000000
-#define RAM_BASE		0xc0000000
-
-#define IO_START		0x80000000      /* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			0xd0000000
-
-#define IO_START_2		0x90000000      /* I/O */
-#define IO_SIZE_2		0x01000000
-#define IO_BASE_2		0xd1000000
-
-#define AUX_START		0x1a000000      /* AUX PORT */
-#define AUX_SIZE 		0x01000000
-#define AUX_BASE		0xd2000000
-
-#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
-#define FLASH1_SIZE 		0x01000000
-#define FLASH1_BASE		0xd3000000
-
-#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
-#define FLASH2_SIZE 		0x01000000
-#define FLASH2_BASE		0xd4000000
-
-#define ISA_START		0x20000000	/* ISA */
-#define ISA_SIZE		0x20000000
-#define ISA_BASE		0xe0000000
-
-#define PCIO_BASE		IO_BASE
-
-#endif
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
deleted file mode 100644
index 645dbdfb3908..000000000000
--- a/include/asm-arm/arch-l7200/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-21-2000	SJH	Created from linux/include/asm-arm/arch-nexuspci/io.h
- *  08-31-2000	SJH	Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h
deleted file mode 100644
index 7120c016e29e..000000000000
--- a/include/asm-arm/arch-l7200/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/arch-l7200/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000 RS	Create l7200 version
- *   03-28-2000 SJH	Removed unused interrupt
- *   07-28-2000 SJH	Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- *       interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS          32
-
-#define IRQ_STWDOG        0   /* Watchdog timer */
-#define IRQ_PROG          1   /* Programmable interrupt */
-#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
-#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
-#define IRQ_GCTC1         4   /* Timer 1 */
-#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
-#define IRQ_DMA           6   /* DMA controller */
-#define IRQ_CLCD          7   /* Color LCD controller */
-#define IRQ_SM_RX         8   /* Smart card */
-#define IRQ_SM_TX         9   /* Smart cart */
-#define IRQ_SM_RST       10   /* Smart card */
-#define IRQ_SIB          11   /* Serial Interface Bus */
-#define IRQ_MMC          12   /* MultiMediaCard */
-#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
-#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
-#define IRQ_SPI          15   /* SPI slave */
-#define IRQ_UART_1       16   /* UART 1 */
-#define IRQ_UART_2       17   /* UART 2 */
-#define IRQ_IRDA         18   /* IRDA */
-#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
-#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
-#define IRQ_GPIO         21   /* General Purpose IO */
-#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
-#define IRQ_M2M          23   /* Memory to memory DMA  */
-#define IRQ_RESERVED     24   /* RESERVED, don't use */
-#define IRQ_INTF         25   /* External active low interrupt */
-#define IRQ_INT0         26   /* External active low interrupt */
-#define IRQ_INT1         27   /* External active low interrupt */
-#define IRQ_INT2         28   /* External active low interrupt */
-#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO       30   /* Low batery or external power */
-#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START	64
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
deleted file mode 100644
index 402df637e740..000000000000
--- a/include/asm-arm/arch-l7200/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- *  03-13-2000	SJH	Created
- *  04-13-2000  RS      Changed bus macros for new addr
- *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET     UL(0xf0000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h
deleted file mode 100644
index 730056c194be..000000000000
--- a/include/asm-arm/arch-l7200/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/pmpcon.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   DC/DC converter register.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
-#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST     0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
-	
-/* PMPCON = 0x811;   // too light and fuzzy
- * PMPCON = 0x844;   
- * PMPCON = 0x866;   // better color poor depth
- * PMPCON = 0x888;   // Darker but better depth 
- * PMPCON = 0x899;   // Darker even better depth
- * PMPCON = 0x8aa;   // too dark even better depth
- * PMPCON = 0X8cc;   // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h
deleted file mode 100644
index 57faea76d1b3..000000000000
--- a/include/asm-arm/arch-l7200/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/pmu.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   Power Management Unit (PMU).
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
-#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
-     unsigned int CURRENT;  /* Current configuration register */
-     unsigned int NEXT;     /* Next configuration register */
-     unsigned int reserved;
-     unsigned int RUN;      /* Run configuration register */
-     unsigned int COMM;     /* Configuration command register */
-     unsigned int SDRAM;    /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
-#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
-#define GET_FASTBUS(reg)  (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
-#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
-#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL   1<<25
-#define CHANGE_NOSTALL   2<<25
-#define CHANGE_STALL     3<<25
-
-#define INTRET           1<<17
-#define OSCEN            1<<16
-#define OSCMUX           1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0         0<<9         /*  3.6864 MHz */
-#define PLLMUL_1         1<<9         /*  ?????? MHz */
-#define PLLMUL_5         5<<9         /*  18.432 MHz */
-#define PLLMUL_10       10<<9         /*  36.864 MHz */
-#define PLLMUL_18       18<<9         /*  ?????? MHz */
-#define PLLMUL_20       20<<9         /*  73.728 MHz */
-#define PLLMUL_32       32<<9         /*  ?????? MHz */
-#define PLLMUL_35       35<<9         /* 129.024 MHz */
-#define PLLMUL_36       36<<9         /*  ?????? MHz */
-#define PLLMUL_39       39<<9         /*  ?????? MHz */
-#define PLLMUL_40       40<<9         /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1        1<<18
-#define CRCLOCK_2        2<<18
-#define CRCLOCK_4        4<<18
-#define CRCLOCK_8        8<<18
-#define CRCLOCK_16      16<<18
-#define CRCLOCK_32      32<<18
-#define CRCLOCK_63      63<<18
-#define CRCLOCK_127    127<<18
-
-#define PLLEN            1<<8
-#define PLLMUX           1<<7
-#define SDR_STOP         1<<6
-#define SYSCLKEN         1<<5
-
-#define BCLK_DIV_4       2<<3
-#define BCLK_DIV_2       1<<3
-#define BCLK_DIV_1       0<<3
-
-#define SDRB_SEL         1<<2
-#define SDRF_SEL         1<<1
-#define FASTBUS          1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK        1<<1  /* Read-only */
-#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK       1<<3  /* Read-only */
-#define PICEN            1<<4  /* Enable Co-procesor */
-#define PICTEST          1<<5
-
-#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h
deleted file mode 100644
index defb8b7fca73..000000000000
--- a/include/asm-arm/arch-l7200/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-20-2000  SJH     Created
- *  03-26-2000  SJH     Added flags for serial ports
- *  03-27-2000  SJH     Corrected BASE_BAUD value
- *  04-14-2000  RS      Made register addr dependent on IO_BASE
- *  05-03-2000  SJH     Complete rewrite
- *  05-09-2000	SJH	Stripped out architecture specific serial stuff
- *                      and placed it in a separate file
- *  07-28-2000	SJH	Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD	3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS		\
-	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
-	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
-	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
deleted file mode 100644
index b1008a9d23e5..000000000000
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-09-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <asm/arch/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE	(IO_BASE + 0x00044000)
-#define UART2_BASE	(IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR			0x00	/* Tx/Rx data */
-#define RXSTAT			0x04	/* Rx status */
-#define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
-#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
-#define UARTCON			0x14	/* control register */
-#define UARTFLG			0x18	/* flag register */
-#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
-#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110			0x827
-#define BR_1200			0x06e
-#define BR_2400			0x05f
-#define BR_4800			0x02f
-#define BR_9600			0x017
-#define BR_14400		0x00f
-#define BR_19200		0x00b
-#define BR_38400		0x005
-#define BR_57600		0x003
-#define BR_76800 		0x002
-#define BR_115200		0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR		0x00	/* No error */
-#define RXSTAT_FRM_ERR		0x01	/* Framing error */
-#define RXSTAT_PAR_ERR		0x02	/* Parity error */
-#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK		0x01	/* generate break on tx */
-#define UBRLCR_PEN		0x02	/* enable parity */
-#define UBRLCR_PDIS		0x00	/* disable parity */
-#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
-#define UBRLCR_FIFO		0x10	/* enable FIFO */
-#define UBRLCR_LEN5		0x60	/* word length5 */
-#define UBRLCR_LEN6		0x40	/* word length6 */
-#define UBRLCR_LEN7		0x20	/* word length7 */
-#define UBRLCR_LEN8		0x00	/* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN		0x01	/* Enable UART */
-#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
-#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
-#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
-#define UARTFLG_DCD		0x04	/* Data carrier detect */
-#define UARTFLG_DSR		0x02	/* Data set ready */
-#define UARTFLG_CTS		0x01	/* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT		0x01	/* TX interrupt */
-#define UART_RXINT		0x02	/* RX interrupt */
-#define UART_RXERRINT		0x04	/* RX error interrupt */
-#define UART_MSINT		0x08	/* Modem Status interrupt */
-#define UART_UDINT		0x10	/* UART Disabled interrupt */
-#define UART_ALLIRQS		0x1f	/* All interrupts */
-
-#endif
diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h
deleted file mode 100644
index bf4364ee2535..000000000000
--- a/include/asm-arm/arch-l7200/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/sib.h
- *
- *  Registers and helper functions for the Serial Interface Bus.
- *
- *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
-     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
-     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
-     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
-     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
-     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
-     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
-     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ   9216000  /* Hertz */
-#define AUDIO_FREQ         5000  /* Hertz */
-#define TELECOM_FREQ       5000  /* Hertz */
-
-#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57      AUDIO_DIVIDE
-#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
-#define MCCR_MCE        (1 << 16)             /* SIB enable */
-#define MCCR_ECS        (1 << 17)             /* External Clock Select */
-#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
-#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
-#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
-#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW               (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE   GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE      GET_CRC
-#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h
deleted file mode 100644
index 771c774f4815..000000000000
--- a/include/asm-arm/arch-l7200/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- *  linux/include/asm-arm/arch-l7200/sys-clock.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   System clocks.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
-#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
-     unsigned int ENABLE;
-     unsigned int ESYNC;
-     unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN          1<<0
-#define B18M_EN         1<<1
-#define CLK3M6_EN       1<<2
-#define BUART_EN        1<<3
-#define CLK18MU_EN      1<<4
-#define FIR_EN          1<<5
-#define MIRN_EN         1<<6
-#define UARTM_EN        1<<7
-#define SIBADC_EN       1<<8
-#define ALTD_EN         1<<9
-#define CLCLK_EN        1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV      1<<0
-#define MIR_SEL         1<<1
-#define SSP_SEL         1<<4
-#define MM_DIV          1<<5
-#define MM_SEL          1<<6
-#define ADC_SEL_2       0<<7
-#define ADC_SEL_4       1<<7
-#define ADC_SEL_8       3<<7
-#define ADC_SEL_16      7<<7
-#define ADC_SEL_32      0x0f<<7
-#define ADC_SEL_64      0x1f<<7
-#define ADC_SEL_128     0x3f<<7
-#define ALTD_SEL        1<<13
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
deleted file mode 100644
index 18825cf071ba..000000000000
--- a/include/asm-arm/arch-l7200/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- *  03-21-2000  SJH	Created
- *  04-26-2000  SJH	Fixed functions
- *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
- *  05-31-2000  SJH	Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h
deleted file mode 100644
index ea22f7fff9cd..000000000000
--- a/include/asm-arm/arch-l7200/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000	RS	Created l7200 version, derived from rpc code
- *   05-03-2000	SJH	Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <asm/arch/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE	(IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32	0x00      /* 32 Hz tick */
-#define RTC_RATE_64	0x10      /* 64 Hz tick */
-#define RTC_RATE_128	0x20      /* 128 Hz tick */
-#define RTC_RATE_256	0x30      /* 256 Hz tick */
-#define RTC_EN_ALARM	0x01      /* Enable alarm */
-#define RTC_EN_TIC	0x04      /* Enable counter */
-#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	timer_irq.handler = timer_interrupt;
-
-	setup_irq(IRQ_RTC_TICK, &timer_irq);
-
-	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
-}
-
-#endif
diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h
deleted file mode 100644
index 3c3202620f00..000000000000
--- a/include/asm-arm/arch-l7200/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000  RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- *       must be changed when choosing a different tick
- *       rate. The value of HZ in 'param.h' must also
- *       be changed to match below.
- */
-#define CLOCK_TICK_RATE		128
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
deleted file mode 100644
index 04be2a088639..000000000000
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-01-2000	SJH	Created
- *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded baud rate
- */
-
-#include <asm/hardware.h>
-
-#define IO_UART  IO_START + 0x00044000
-
-#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p)		(*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
-	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
-	      __raw_readb(IO_UART + 0x18) & 0x08)
-		barrier();
-
-	__raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
-	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
-	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h
deleted file mode 100644
index 816231eedaac..000000000000
--- a/include/asm-arm/arch-l7200/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h
deleted file mode 100644
index 7d0ba18ad578..000000000000
--- a/include/asm-arm/arch-lh7a40x/clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/clocks.h
- *
- *  Copyright (C) 2004 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CLOCKS_H
-#define __ASM_ARCH_CLOCKS_H
-
-unsigned int fclkfreq_get (void);
-unsigned int hclkfreq_get (void);
-unsigned int pclkfreq_get (void);
-
-#endif  /* _ASM_ARCH_CLOCKS_H */
diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h
deleted file mode 100644
index 51de96e87faf..000000000000
--- a/include/asm-arm/arch-lh7a40x/constants.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/constants.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CONSTANTS_H
-#define __ASM_ARCH_CONSTANTS_H
-
-
-/* Addressing constants */
-
-	/* SoC CPU IO addressing */
-#define IO_PHYS			(0x80000000)
-#define IO_VIRT			(0xf8000000)
-#define IO_SIZE			(0x0000B000)
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_PHYS		(0x20000000)
-# define CPLD_VIRT		(0xf2000000)
-# define CPLD_SIZE		PAGE_SIZE
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define IOBARRIER_PHYS		0x10000000 /* Second bank, fastest timing */
-# define IOBARRIER_VIRT		0xf0000000
-# define IOBARRIER_SIZE		PAGE_SIZE
-
-# define CF_PHYS		0x60200000
-# define CF_VIRT		0xf6020000
-# define CF_SIZE		(8*1024)
-
-	/* The IO mappings for the LPD CPLD are, unfortunately, sparse.  */
-# define CPLDX_PHYS(x)		(0x70000000 | ((x) << 20))
-# define CPLDX_VIRT(x)		(0xf7000000 | ((x) << 16))
-# define CPLD00_PHYS		CPLDX_PHYS (0x00) /* Wired LAN */
-# define CPLD00_VIRT		CPLDX_VIRT (0x00)
-# define CPLD00_SIZE		PAGE_SIZE
-# define CPLD02_PHYS		CPLDX_PHYS (0x02)
-# define CPLD02_VIRT		CPLDX_VIRT (0x02)
-# define CPLD02_SIZE		PAGE_SIZE
-# define CPLD06_PHYS		CPLDX_PHYS (0x06)
-# define CPLD06_VIRT		CPLDX_VIRT (0x06)
-# define CPLD06_SIZE		PAGE_SIZE
-# define CPLD08_PHYS		CPLDX_PHYS (0x08)
-# define CPLD08_VIRT		CPLDX_VIRT (0x08)
-# define CPLD08_SIZE		PAGE_SIZE
-# define CPLD0A_PHYS		CPLDX_PHYS (0x0a)
-# define CPLD0A_VIRT		CPLDX_VIRT (0x0a)
-# define CPLD0A_SIZE		PAGE_SIZE
-# define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
-# define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
-# define CPLD0C_SIZE		PAGE_SIZE
-# define CPLD0E_PHYS		CPLDX_PHYS (0x0e)
-# define CPLD0E_VIRT		CPLDX_VIRT (0x0e)
-# define CPLD0E_SIZE		PAGE_SIZE
-# define CPLD10_PHYS		CPLDX_PHYS (0x10)
-# define CPLD10_VIRT		CPLDX_VIRT (0x10)
-# define CPLD10_SIZE		PAGE_SIZE
-# define CPLD12_PHYS		CPLDX_PHYS (0x12)
-# define CPLD12_VIRT		CPLDX_VIRT (0x12)
-# define CPLD12_SIZE		PAGE_SIZE
-# define CPLD14_PHYS		CPLDX_PHYS (0x14)
-# define CPLD14_VIRT		CPLDX_VIRT (0x14)
-# define CPLD14_SIZE		PAGE_SIZE
-# define CPLD16_PHYS		CPLDX_PHYS (0x16)
-# define CPLD16_VIRT		CPLDX_VIRT (0x16)
-# define CPLD16_SIZE		PAGE_SIZE
-# define CPLD18_PHYS		CPLDX_PHYS (0x18)
-# define CPLD18_VIRT		CPLDX_VIRT (0x18)
-# define CPLD18_SIZE		PAGE_SIZE
-# define CPLD1A_PHYS		CPLDX_PHYS (0x1a)
-# define CPLD1A_VIRT		CPLDX_VIRT (0x1a)
-# define CPLD1A_SIZE		PAGE_SIZE
-#endif
-
-	/* Timing constants */
-
-#define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
-#define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
-#define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
-#define HCLK			(99993600)
-//#define HCLK			(119808000)
-
-#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/include/asm-arm/arch-lh7a40x/debug-macro.S
deleted file mode 100644
index 421dcd6a8506..000000000000
--- a/include/asm-arm/arch-lh7a40x/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-	@ It is not known if this will be appropriate for every 40x
-	@ board.
-
-		.macro  addruart,rx
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1                 @ MMU enabled?
-		mov     \rx, #0x00000700        @ offset from base
-		orreq   \rx, \rx, #0x80000000   @ physical base
-		orrne   \rx, \rx, #0xf8000000   @ virtual base
-		.endm
-
-		.macro  senduart,rd,rx
-		strb    \rd, [\rx]              @ DATA
-		.endm
-
-		.macro  busyuart,rd,rx          @ spin while busy
-1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
-		bne     1001b                   @ yes, spin
-		.endm
-
-		.macro  waituart,rd,rx          @ wait for Tx FIFO room
-1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
-		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
-		bne     1001b                   @ yes, spin
-		.endm
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h
deleted file mode 100644
index a8cbd14bbf9d..000000000000
--- a/include/asm-arm/arch-lh7a40x/dma.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/dma.h
- *
- *  Copyright (C) 2005 Marc Singer
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-typedef enum {
-	DMA_M2M0	= 0,
-	DMA_M2M1	= 1,
-	DMA_M2P0	= 2,	/* Tx */
-	DMA_M2P1	= 3,	/* Rx */
-	DMA_M2P2	= 4,	/* Tx */
-	DMA_M2P3	= 5,	/* Rx */
-	DMA_M2P4	= 6,	/* Tx - AC97 */
-	DMA_M2P5	= 7,	/* Rx - AC97 */
-	DMA_M2P6	= 8,	/* Tx */
-	DMA_M2P7	= 9,	/* Rx */
-} dma_device_t;
-
-#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
-
-#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
-#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
-
-#define DMAC_GIR_MMI1		(1<<11)
-#define DMAC_GIR_MMI0		(1<<10)
-#define DMAC_GIR_MPI8		(1<<9)
-#define DMAC_GIR_MPI9		(1<<8)
-#define DMAC_GIR_MPI6		(1<<7)
-#define DMAC_GIR_MPI7		(1<<6)
-#define DMAC_GIR_MPI4		(1<<5)
-#define DMAC_GIR_MPI5		(1<<4)
-#define DMAC_GIR_MPI2		(1<<3)
-#define DMAC_GIR_MPI3		(1<<2)
-#define DMAC_GIR_MPI0		(1<<1)
-#define DMAC_GIR_MPI1		(1<<0)
-
-#define DMAC_M2P0		0x0000
-#define DMAC_M2P1		0x0040
-#define DMAC_M2P2		0x0080
-#define DMAC_M2P3		0x00c0
-#define DMAC_M2P4		0x0240
-#define DMAC_M2P5		0x0200
-#define DMAC_M2P6		0x02c0
-#define DMAC_M2P7		0x0280
-#define DMAC_M2P8		0x0340
-#define DMAC_M2P9		0x0300
-#define DMAC_M2M0		0x0100
-#define DMAC_M2M1		0x0140
-
-#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
-#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
-#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
-#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
-#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
-#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
-#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
-#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
-#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
-#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
-#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
-
-#define DMAC_PCONTROL_ENABLE	(1<<4)
-
-#define DMAC_PORT_USB		0
-#define DMAC_PORT_SDMMC		1
-#define DMAC_PORT_AC97_1	2
-#define DMAC_PORT_AC97_2	3
-#define DMAC_PORT_AC97_3	4
-#define DMAC_PORT_UART1		6
-#define DMAC_PORT_UART2		7
-#define DMAC_PORT_UART3		8
-
-#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
-#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
-
-#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
-#define DMAC_PSTATUS_STALLRINT	 (1<<0)
-
-#define DMAC_INT_CHE		 (1<<3)
-#define DMAC_INT_NFB		 (1<<1)
-#define DMAC_INT_STALL		 (1<<0)
diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S
deleted file mode 100644
index ffe397250f0c..000000000000
--- a/include/asm-arm/arch-lh7a40x/entry-macro.S
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * include/asm-arm/arch-lh7a40x/entry-macro.S
- *
- * Low-level IRQ helper macros for LH7A40x platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-
-/* In order to allow there to be support for both of the processor
-   classes at the same time, we make a hack here that isn't very
-   pretty.  At startup, the link pointed to with the
-   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
-   detected as a lh7a404.
-
-   *** FIXME: we should clean this up so that there is only one
-	      implementation for each CPU's design.
-
-*/
-
-#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-branch_irq_lh7a400: b 1000f
-
-@ Implementation of the LH7A404 get_irqnr_and_base.
-
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-		b	1009f
-
-@ Implementation of the LH7A400 get_irqnr_and_base.
-
-1000:		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-
-1009:
-               .endm
-
-
-
-#elif defined (CONFIG_ARCH_LH7A400)
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1008:		movs	\irqstat, #1			@ Force !Z
-1009:
-               .endm
-
-#elif defined(CONFIG_ARCH_LH7A404)
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\irqnr, #0			@ VIC1 irq base
-		mov	\base, #io_p2v(0x80000000)	@ APB registers
-		add	\base, \base, #0x8000
-		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
-		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
-		bne	1001f
-		add	\base, \base, #(0xa000 - 0x8000)
-		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
-		tst	\tmp, #VA_VECTORED		@ Direct vectored
-		bne	1002f
-		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
-		mov	\irqnr, #32			@ VIC2 irq base
-
-1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
-		bcs	1008f				@ Bit set; irq found
-		add	\irqnr, \irqnr, #1
-		bne	1001b				@ Until no bits
-		b	1009f				@ Nothing?  Hmm.
-1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
-1008:		movs	\irqstat, #1			@ Force !Z
-		str	\tmp, [\base, #0x0030]		@ Clear vector
-1009:
-               .endm
-#endif
-
-
diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h
deleted file mode 100644
index e9ff74fd7939..000000000000
--- a/include/asm-arm/arch-lh7a40x/hardware.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/hardware.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ]
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
-
-#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
-#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
-
-#ifdef __ASSEMBLY__
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#else
-
-# if 0
-#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-# else
-/*
- * This __REG() version gives the same results as the one above,  except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x)	__REGP(io_p2v(x))
-typedef struct { volatile u16 offset[4096]; } __regbase16;
-# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
-# define __REG16(x)	__REGP16(io_p2v(x))
-typedef struct { volatile u8 offset[4096]; } __regbase8;
-# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
-# define __REG8(x)	__REGP8(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y)	\
-	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
-				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#endif
-
-#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
-
-#include "registers.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
deleted file mode 100644
index 17bc94097481..000000000000
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/io.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* No ISA or PCI bus on this machine. */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h
deleted file mode 100644
index afe8c7cbad6a..000000000000
--- a/include/asm-arm/arch-lh7a40x/irqs.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/irqs.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-/* It is to be seen whether or not we can build a kernel for more than
- * one board.  For the time being, these macros assume that we cannot.
- * Thus, it is OK to ifdef machine/board specific IRQ assignments.
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define FIQ_START	80
-
-#if defined (CONFIG_ARCH_LH7A400)
-
-  /* FIQs */
-
-# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
-# define IRQ_BLINT	1	/* Battery Low */
-# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
-# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
-
-  /* IRQs */
-
-# define IRQ_CSINT	4	/* Audio Codec (ACI) */
-# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
-# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
-# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
-# define IRQ_T1UI	8	/* Timer 1 underflow */
-# define IRQ_T2UI	9	/* Timer 2 underflow */
-# define IRQ_RTCMI	10
-# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
-# define IRQ_UART1INTR	12
-# define IRQ_UART2INTR	13
-# define IRQ_LCDINTR	14
-# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
-# define IRQ_UART3INTR	16
-# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
-# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
-# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
-# define IRQ_USBINTR	20
-# define IRQ_DMAINTR	21
-# define IRQ_T3UI	22	/* Timer 3 underflow */
-# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
-# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
-# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
-# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
-# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
-
-# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
-
-#endif
-
-#if defined (CONFIG_ARCH_LH7A404)
-
-# define IRQ_BROWN	0	/* Brownout */
-# define IRQ_WDTINTR	1	/* Watchdog Timer */
-# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
-# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
-# define IRQ_T1UI	4	/* Timer 1 underflow */
-# define IRQ_T2UI	5	/* Timer 2 underflow */
-# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
-# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
-# define IRQ_DMAM2P1	8
-# define IRQ_DMAM2P2	9
-# define IRQ_DMAM2P3	10
-# define IRQ_DMAM2P4	11
-# define IRQ_DMAM2P5	12
-# define IRQ_DMAM2P6	13
-# define IRQ_DMAM2P7	14
-# define IRQ_DMAM2P8	15
-# define IRQ_DMAM2P9	16
-# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
-# define IRQ_DMAM2M1	18
-# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
-# define IRQ_GPIO1INTR	20
-# define IRQ_GPIO2INTR	21
-# define IRQ_GPIO3INTR	22
-# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
-# define IRQ_SOFT_V1_24	24
-# define IRQ_SOFT_V1_25	25
-# define IRQ_SOFT_V1_26	26
-# define IRQ_SOFT_V1_27	27
-# define IRQ_SOFT_V1_28	28
-# define IRQ_SOFT_V1_29	29
-# define IRQ_SOFT_V1_30	30
-# define IRQ_SOFT_V1_31	31
-
-# define IRQ_BLINT	32	/* Battery Low */
-# define IRQ_BMIINTR	33	/* Battery Monitor */
-# define IRQ_MCINTR	34	/* Media Change */
-# define IRQ_TINTR	35	/* 64Hz Tick */
-# define IRQ_WEINT	36	/* Watchdog Expired */
-# define IRQ_RTCMI	37	/* Real-time Clock Match */
-# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
-# define IRQ_UART1ERR	39	/* UART1 Error */
-# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
-# define IRQ_UART2ERR	41	/* UART2 Error */
-# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
-# define IRQ_UART3ERR	43	/* UART3 Error */
-# define IRQ_SCIINTR	44	/* Smart Card */
-# define IRQ_TSCINTR	45	/* Touchscreen */
-# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
-# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
-# define IRQ_GPIO5INTR	48
-# define IRQ_GPIO6INTR	49
-# define IRQ_GPIO7INTR	50
-# define IRQ_T3UI	51	/* Timer 3 underflow */
-# define IRQ_LCDINTR	52	/* LCD Controller */
-# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
-# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
-# define IRQ_USBINTR	55	/* USB Device Port */
-# define IRQ_USHINTR	56	/* USB Host Port */
-# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
-# define IRQ_SOFT_V2_26	58
-# define IRQ_SOFT_V2_27	59
-# define IRQ_SOFT_V2_28	60
-# define IRQ_SOFT_V2_29	61
-# define IRQ_SOFT_V2_30	62
-# define IRQ_SOFT_V2_31	63
-
-# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
-
-	/* Given IRQ, return GPIO interrupt number 0-7 */
-# define IRQ_TO_GPIO(i)  ((i) \
-	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
-	- IRQ_GPIO0INTR)
-
-			/* Vector Address constants */
-# define VA_VECTORED	0x100	/* Set for vectored interrupt */
-# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
-# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
-
-#endif
-
-  /* IRQ aliases */
-
-#if !defined (IRQ_GPIO0INTR)
-# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
-#endif
-#define IRQ_TICK	IRQ_TINTR
-#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
-#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
-#define IRQ_USB		IRQ_USBINTR	/* USB device */
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
-# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
-# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
-# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
-# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
-#endif
-
-  /* System specific IRQs */
-
-#define IRQ_BOARD_START NR_IRQ_CPU
-
-#ifdef CONFIG_MACH_KEV7A400
-# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		5
-# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
-# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
-# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
-# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
-# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
-# define NR_IRQ_BOARD		2
-# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
-# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400)
-# define IRQ_TOUCH		IRQ_LPD7A400_TS
-#endif
-
-#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h
deleted file mode 100644
index 9b0c8012e713..000000000000
--- a/include/asm-arm/arch-lh7a40x/memory.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/memory.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- *
- *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define KVADDR_TO_NID(addr) \
-  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
-   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else  /* 2 banks per node */
-#  define KVADDR_TO_NID(addr) \
-      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define PFN_TO_NID(pfn) \
-  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else  /* 2 banks per node */
-#  define PFN_TO_NID(pfn) \
-    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else  /* 2 banks per node */
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h
deleted file mode 100644
index b4f09b3e2d03..000000000000
--- a/include/asm-arm/arch-lh7a40x/registers.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/registers.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *  Copyright (C) 2004 Logic Product Development
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/constants.h>
-
-#ifndef __ASM_ARCH_REGISTERS_H
-#define __ASM_ARCH_REGISTERS_H
-
-
-	/* Physical register base addresses */
-
-#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
-#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
-#define USB_PHYS	(0x80000200)	/* USB Client */
-#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
-#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
-#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
-#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
-#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
-#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
-#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
-#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
-#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
-#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
-#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
-#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
-#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
-#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
-#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
-#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
-#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
-#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
-#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
-#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
-#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */
-
-	/* Physical registers of the LH7A404 */
-
-#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
-#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
-#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
-#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
-
-/*#define KBD_PHYS	(0x80000e00) */
-/*#define LCDICP_PHYS	(0x80001000) */
-
-
-	/* Clock/State Controller register */
-
-#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
-#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
-#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
-#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */
-
-#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
-#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
-#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
-#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
-#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
-#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
-#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
-#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
-#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
-#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
-#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
-#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
-#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)
-
-#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
-#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
-#define CSC_PWRSR_CHIPID_SHIFT	(16)
-#define CSC_PWRSR_CHIPID_MASK	(0xff)
-
-#define CSC_USBDRESET_APBRESETREG	(1<<1)
-#define CSC_USBDRESET_IORESETREG	(1<<0)
-
-	/* Interrupt Controller registers */
-
-#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
-#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
-#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
-#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */
-
-
-	/* Vectored Interrupted Controller registers */
-
-#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
-#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
-#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
-#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
-#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
-#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
-#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
-#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
-#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
-#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
-#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
-#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
-#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
-#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
-#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
-#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
-#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
-#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
-#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
-#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
-#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
-#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
-#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
-#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
-#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
-#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)
-
-#define VIC_CNTL_ENABLE	(0x20)
-
-	/* USB Host registers (Open HCI compatible) */
-
-#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)
-
-
-	/* GPIO registers */
-
-#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
-#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
-#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
-#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
-#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
-#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
-#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
-#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
-#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
-#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
-#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
-#define GPIO_PED	__REG(GPIO_PHYS + 0x20)
-
-
-	/* Static Memory Controller registers */
-
-#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
-#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
-#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
-#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
-#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
-#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */
-
-
-#ifdef CONFIG_MACH_KEV7A400
-# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
-# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
-# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
-# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
-# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
-# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
-# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
-# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
-# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
-# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
-# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
-# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
-
-#endif
-
-#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-
-# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
-# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
-# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
-# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
-# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
-# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
-# define CPLD_FLASH		__REG16(CPLD10_PHYS)
-# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
-# define CPLD_REVISION		__REG16(CPLD14_PHYS)
-# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
-# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
-# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)
-
-#endif
-
-	/* Timer registers */
-
-#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
-#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
-#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
-#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
-
-#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
-#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
-#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
-#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
-
-#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
-
-#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
-#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
-#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
-#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
-
-#define TIMER_C_ENABLE		(1<<7)
-#define TIMER_C_PERIODIC	(1<<6)
-#define TIMER_C_FREERUNNING	(0)
-#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
-#define TIMER_C_508KHZ		(0x08)
-
-	/* GPIO registers */
-
-#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
-#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
-#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
-#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
-#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
-#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
-#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */
-
-
-#endif  /* _ASM_ARCH_REGISTERS_H */
diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/include/asm-arm/arch-lh7a40x/ssp.h
deleted file mode 100644
index 132b1c4d5ce6..000000000000
--- a/include/asm-arm/arch-lh7a40x/ssp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* ssp.h
-     $Id$
-
-   written by Marc Singer
-   6 Dec 2004
-
-   Copyright (C) 2004 Marc Singer
-
-   -----------
-   DESCRIPTION
-   -----------
-
-   This SSP header is available throughout the kernel, for this
-   machine/architecture, because drivers that use it may be dispersed.
-
-   This file was cloned from the 7952x implementation.  It would be
-   better to share them, but we're taking an easier approach for the
-   time being.
-
-*/
-
-#if !defined (__SSP_H__)
-#    define   __SSP_H__
-
-/* ----- Includes */
-
-/* ----- Types */
-
-struct ssp_driver {
-	int  (*init)		(void);
-	void (*exit)		(void);
-	void (*acquire)		(void);
-	void (*release)		(void);
-	int  (*configure)	(int device, int mode, int speed,
-				 int frame_size_write, int frame_size_read);
-	void (*chip_select)	(int enable);
-	void (*set_callbacks)   (void* handle,
-				 irqreturn_t (*callback_tx)(void*),
-				 irqreturn_t (*callback_rx)(void*));
-	void (*enable)		(void);
-	void (*disable)		(void);
-//	int  (*save_state)	(void*);
-//	void (*restore_state)	(void*);
-	int  (*read)		(void);
-	int  (*write)		(u16 data);
-	int  (*write_read)	(u16 data);
-	void (*flush)		(void);
-	void (*write_async)	(void* pv, size_t cb);
-	size_t (*write_pos)	(void);
-};
-
-	/* These modes are only available on the LH79524 */
-#define SSP_MODE_SPI		(1)
-#define SSP_MODE_SSI		(2)
-#define SSP_MODE_MICROWIRE	(3)
-#define SSP_MODE_I2S		(4)
-
-	/* CPLD SPI devices */
-#define DEVICE_EEPROM	0	/* Configuration eeprom */
-#define DEVICE_MAC	1	/* MAC eeprom (LPD79524) */
-#define DEVICE_CODEC	2	/* Audio codec */
-#define DEVICE_TOUCH	3	/* Touch screen (LPD79520) */
-
-/* ----- Globals */
-
-/* ----- Prototypes */
-
-//extern struct ssp_driver lh79520_i2s_driver;
-extern struct ssp_driver lh7a400_cpld_ssp_driver;
-
-#endif  /* __SSP_H__ */
diff --git a/include/asm-arm/arch-lh7a40x/system.h b/include/asm-arm/arch-lh7a40x/system.h
deleted file mode 100644
index e1df8aa460f2..000000000000
--- a/include/asm-arm/arch-lh7a40x/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/system.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle ();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset (0);
-}
diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/include/asm-arm/arch-lh7a40x/timex.h
deleted file mode 100644
index fa726b670829..000000000000
--- a/include/asm-arm/arch-lh7a40x/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/timex.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/constants.h>
-
-#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
-
-/*
-#define CLOCK_TICK_RATE		3686400
-*/
diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h
deleted file mode 100644
index 3d1ce0426a33..000000000000
--- a/include/asm-arm/arch-lh7a40x/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/uncompress.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/registers.h>
-
-#ifndef UART_R_DATA
-# define UART_R_DATA	(0x00)
-#endif
-#ifndef UART_R_STATUS
-# define UART_R_STATUS	(0x10)
-#endif
-#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
-
-	/* Access UART with physical addresses before MMU is setup */
-#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
-#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
-
-static inline void putc(int ch)
-{
-	while (UART_STATUS & nTxRdy)
-		barrier();
-	UART_DATA = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-	/* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/include/asm-arm/arch-lh7a40x/vmalloc.h
deleted file mode 100644
index 8163e45109b9..000000000000
--- a/include/asm-arm/arch-lh7a40x/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/vmalloc.h
- *
- *  Copyright (C) 2004 Coastal Environmental Systems
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- *
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S
deleted file mode 100644
index 585502e96513..000000000000
--- a/include/asm-arm/arch-loki/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-loki/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/loki.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =LOKI_REGS_PHYS_BASE
-	ldrne	\rx, =LOKI_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/include/asm-arm/arch-loki/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S
deleted file mode 100644
index 693257cdbeb8..000000000000
--- a/include/asm-arm/arch-loki/entry-macro.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-arm/arch-loki/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/loki.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_OFF]
-	mov	\irqnr, #0
-	ands	\irqstat, \irqstat, \tmp
-	clzne	\irqnr, \irqstat
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h
deleted file mode 100644
index f65b01c733b6..000000000000
--- a/include/asm-arm/arch-loki/hardware.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * include/asm-arm/arch-loki/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "loki.h"
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h
deleted file mode 100644
index e7418a915e75..000000000000
--- a/include/asm-arm/arch-loki/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-loki/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "loki.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
-					+ LOKI_PCIE0_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h
deleted file mode 100644
index 7e4971438072..000000000000
--- a/include/asm-arm/arch-loki/irqs.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/asm-arm/arch-loki/irqs.h
- *
- * IRQ definitions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "loki.h"	/* need GPIO_MAX */
-
-/*
- * Interrupt Controller
- */
-#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
-#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
-#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
-#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
-#define IRQ_LOKI_COM_A_ERR		6
-#define IRQ_LOKI_COM_A_IN		7
-#define IRQ_LOKI_COM_A_OUT		8
-#define IRQ_LOKI_COM_B_ERR		9
-#define IRQ_LOKI_COM_B_IN		10
-#define IRQ_LOKI_COM_B_OUT		11
-#define IRQ_LOKI_DMA_A			12
-#define IRQ_LOKI_DMA_B			13
-#define IRQ_LOKI_SAS_A			14
-#define IRQ_LOKI_SAS_B			15
-#define IRQ_LOKI_DDR			16
-#define IRQ_LOKI_XOR			17
-#define IRQ_LOKI_BRIDGE			18
-#define IRQ_LOKI_PCIE_A_ERR		20
-#define IRQ_LOKI_PCIE_A_INT		21
-#define IRQ_LOKI_PCIE_B_ERR		22
-#define IRQ_LOKI_PCIE_B_INT		23
-#define IRQ_LOKI_GBE_A_INT		24
-#define IRQ_LOKI_GBE_B_INT		25
-#define IRQ_LOKI_DEV_ERR		26
-#define IRQ_LOKI_UART0			27
-#define IRQ_LOKI_UART1			28
-#define IRQ_LOKI_TWSI			29
-#define IRQ_LOKI_GPIO_23_0		30
-#define IRQ_LOKI_GPIO_25_24		31
-
-/*
- * Loki General Purpose Pins
- */
-#define IRQ_LOKI_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h
deleted file mode 100644
index 5dd05ee0a4e6..000000000000
--- a/include/asm-arm/arch-loki/loki.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-arm/arch-loki/loki.h
- *
- * Generic definitions for Marvell Loki (88RC8480) SoC flavors
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_LOKI_H
-#define __ASM_ARCH_LOKI_H
-
-/*
- * Marvell Loki (88RC8480) address maps.
- *
- * phys
- * d0000000	on-chip peripheral registers
- * e0000000	PCIe 0 Memory space
- * e8000000	PCIe 1 Memory space
- * f0000000	PCIe 0 I/O space
- * f0100000	PCIe 1 I/O space
- *
- * virt		phys		size
- * fed00000	d0000000	1M	on-chip peripheral registers
- * fee00000	f0000000	64K	PCIe 0 I/O space
- * fef00000	f0100000	64K	PCIe 1 I/O space
- */
-
-#define LOKI_REGS_PHYS_BASE		0xd0000000
-#define LOKI_REGS_VIRT_BASE		0xfed00000
-#define LOKI_REGS_SIZE			SZ_1M
-
-#define LOKI_PCIE0_IO_PHYS_BASE		0xf0000000
-#define LOKI_PCIE0_IO_VIRT_BASE		0xfee00000
-#define LOKI_PCIE0_IO_BUS_BASE		0x00000000
-#define LOKI_PCIE0_IO_SIZE		SZ_64K
-
-#define LOKI_PCIE1_IO_PHYS_BASE		0xf0100000
-#define LOKI_PCIE1_IO_VIRT_BASE		0xfef00000
-#define LOKI_PCIE1_IO_BUS_BASE		0x00000000
-#define LOKI_PCIE1_IO_SIZE		SZ_64K
-
-#define LOKI_PCIE0_MEM_PHYS_BASE	0xe0000000
-#define LOKI_PCIE0_MEM_SIZE		SZ_128M
-
-#define LOKI_PCIE1_MEM_PHYS_BASE	0xe8000000
-#define LOKI_PCIE1_MEM_SIZE		SZ_128M
-
-/*
- * Register Map
- */
-#define DEV_BUS_PHYS_BASE	(LOKI_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x10000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
-#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	0x0004
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_OFF		0x0000
-#define   IRQ_MASK_OFF		0x0004
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-
-#define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
-
-#define PCIE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x40000)
-
-#define SAS0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x80000)
-
-#define SAS1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x90000)
-
-#define GE0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xa0000)
-#define GE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xa0000)
-
-#define GE1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xb0000)
-#define GE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xb0000)
-
-#define DDR_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xf0000)
-#define DDR_REG(x)		(DDR_VIRT_BASE | (x))
-
-
-#define GPIO_MAX		8
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h
deleted file mode 100644
index 835101e49875..000000000000
--- a/include/asm-arm/arch-loki/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-loki/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h
deleted file mode 100644
index a3568ac8ec35..000000000000
--- a/include/asm-arm/arch-loki/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-loki/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/loki.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h
deleted file mode 100644
index 940014f97cae..000000000000
--- a/include/asm-arm/arch-loki/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * include/asm-arm/arch-loki/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define LOKI_TCLK		180000000
diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h
deleted file mode 100644
index 89a0cf88d3a5..000000000000
--- a/include/asm-arm/arch-loki/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-loki/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/loki.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h
deleted file mode 100644
index f5be06220491..000000000000
--- a/include/asm-arm/arch-loki/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-loki/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe800000
diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h
deleted file mode 100644
index 763051f8ba14..000000000000
--- a/include/asm-arm/arch-msm/board.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/include/asm-arm/arch-msm/board.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_BOARD_H
-#define __ASM_ARCH_MSM_BOARD_H
-
-#include <linux/types.h>
-
-/* platform device data structures */
-
-struct msm_mddi_platform_data
-{
-	void (*panel_power)(int on);
-	unsigned has_vsync_irq:1;
-};
-
-/* common init routines for use by arch/arm/mach-msm/board-*.c */
-
-void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
-void __init msm_init_irq(void);
-void __init msm_init_gpio(void);
-
-#endif
diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S
deleted file mode 100644
index 393d5272e506..000000000000
--- a/include/asm-arm/arch-msm/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* include/asm-arm/arch-msm7200/debug-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/msm_iomap.h>
-
-	.macro	addruart,rx
-	@ see if the MMU is enabled and select appropriate base address
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1
-	ldreq	\rx, =MSM_UART1_PHYS
-	ldrne	\rx, =MSM_UART1_BASE
-	.endm
-
-	.macro	senduart,rd,rx
-	str	\rd, [\rx, #0x0C]
-	.endm
-
-	.macro	waituart,rd,rx
-	@ wait for TX_READY
-1:	ldr	\rd, [\rx, #0x08]
-	tst	\rd, #0x04
-	beq	1b
-	.endm
-
-	.macro	busyuart,rd,rx
-	.endm
diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h
deleted file mode 100644
index e4b565b27b35..000000000000
--- a/include/asm-arm/arch-msm/dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/include/asm-arm/arch-msm/dma.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_DMA_H
-
-#include <linux/list.h>
-#include <asm/arch/msm_iomap.h>
-
-struct msm_dmov_cmd {
-	struct list_head list;
-	unsigned int cmdptr;
-	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
-/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
-};
-
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
-
-
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-/* only security domain 3 is available to the ARM11
- * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
- */
-
-#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
-#define DMOV_CMD_LIST         (0 << 29) /* does not work */
-#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
-#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
-#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
-#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
-
-#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
-#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
-#define DMOV_RSLT_ERROR       (1 << 3)
-#define DMOV_RSLT_FLUSH       (1 << 2)
-#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
-#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
-
-#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
-#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
-#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
-#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
-#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
-#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
-
-#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
-#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
-#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
-#define DMOV_STATUS_RSLT_VALID       (1 << 1)
-#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
-
-#define DMOV_ISR              DMOV_SD3(0x380, 0)
-
-#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
-#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
-#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
-#define DMOV_CONFIG_IRQ_EN             (1 << 0)
-
-/* channel assignments */
-
-#define DMOV_NAND_CHAN        7
-#define DMOV_NAND_CRCI_CMD    5
-#define DMOV_NAND_CRCI_DATA   4
-
-#define DMOV_SDC1_CHAN        8
-#define DMOV_SDC1_CRCI        6
-
-#define DMOV_SDC2_CHAN        8
-#define DMOV_SDC2_CRCI        7
-
-#define DMOV_TSIF_CHAN        10
-#define DMOV_TSIF_CRCI        10
-
-#define DMOV_USB_CHAN         11
-
-/* no client rate control ifc (eg, ram) */
-#define DMOV_NONE_CRCI        0
-
-
-/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
- * is going to walk a list of 32bit pointers as described below.  Each
- * pointer points to a *array* of dmov_s, etc structs.  The last pointer
- * in the list is marked with CMD_PTR_LP.  The last struct in each array
- * is marked with CMD_LC (see below).
- */
-#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
-#define CMD_PTR_LP          (1 << 31) /* last pointer */
-#define CMD_PTR_PT          (3 << 29) /* ? */
-
-/* Single Item Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src;
-	unsigned dst;
-	unsigned len;
-} dmov_s;
-
-/* Scatter/Gather Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src_dscr;
-	unsigned dst_dscr;
-	unsigned _reserved;
-} dmov_sg;
-
-/* bits for the cmd field of the above structures */
-
-#define CMD_LC      (1 << 31)  /* last command */
-#define CMD_FR      (1 << 22)  /* force result -- does not work? */
-#define CMD_OCU     (1 << 21)  /* other channel unblock */
-#define CMD_OCB     (1 << 20)  /* other channel block */
-#define CMD_TCB     (1 << 19)  /* ? */
-#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
-#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
-
-#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
-#define CMD_MODE_SG         (1 << 0) /* untested */
-#define CMD_MODE_IND_SG     (2 << 0) /* untested */
-#define CMD_MODE_BOX        (3 << 0) /* untested */
-
-#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
-#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
-#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
-
-#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
-#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
-#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
-
-#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
-#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
-
-#endif
diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S
deleted file mode 100644
index ee24aece4cb0..000000000000
--- a/include/asm-arm/arch-msm/entry-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* include/asm-arm/arch-msm7200/entry-macro.S
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/arch/msm_iomap.h>
-
- 	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h
deleted file mode 100644
index 89af2b70182f..000000000000
--- a/include/asm-arm/arch-msm/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hardware.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HARDWARE_H
-
-#endif
diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h
deleted file mode 100644
index 4645ae26b62a..000000000000
--- a/include/asm-arm/arch-msm/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* include/asm-arm/arch-msm/io.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __arch_ioremap __msm_ioremap
-#define __arch_iounmap __iounmap
-
-void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)         __io(a)
-#define __mem_pci(a)    (a)
-
-#endif
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
deleted file mode 100644
index e62a108b1857..000000000000
--- a/include/asm-arm/arch-msm/irqs.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* linux/include/asm-arm/arch-msm/irqs.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_H
-#define __ASM_ARCH_MSM_IRQS_H
-
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221     */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_UART1            9
-#define INT_UART2            10
-#define INT_UART3            11
-#define INT_UART1_RX         12
-#define INT_UART2_RX         13
-#define INT_UART3_RX         14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_GPIO_GROUP1      (32 + 0)
-#define INT_GPIO_GROUP2      (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_PBUS_ARM11       (32 + 6)
-#define INT_AXI_MPU_SMI      (32 + 7)
-#define INT_AXI_MPU_EBI1     (32 + 8)
-#define INT_AD_HSSD          (32 + 9)
-#define INT_ARM11_PMU        (32 + 10)
-#define INT_ARM11_DMA        (32 + 11)
-#define INT_TSIF_IRQ         (32 + 12)
-#define INT_UART1DM_IRQ      (32 + 13)
-#define INT_UART1DM_RX       (32 + 14)
-#define INT_USB_HS           (32 + 15)
-#define INT_SDC3_0           (32 + 16)
-#define INT_SDC3_1           (32 + 17)
-#define INT_SDC4_0           (32 + 18)
-#define INT_SDC4_1           (32 + 19)
-#define INT_UART2DM_RX       (32 + 20)
-#define INT_UART2DM_IRQ      (32 + 21)
-
-/* 22-31 are reserved */
-
-#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
-
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
-
-#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
-
-#endif
diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h
deleted file mode 100644
index b5ce0e9ac86d..000000000000
--- a/include/asm-arm/arch-msm/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-msm/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#define PHYS_OFFSET		UL(0x10000000)
-
-/* bus address and physical addresses are identical */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h
deleted file mode 100644
index b8955cc26fec..000000000000
--- a/include/asm-arm/arch-msm/msm_iomap.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/include/asm-arm/arch-msm/msm_iomap.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_H
-#define __ASM_ARCH_MSM_IOMAP_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          0xE0000000
-#define MSM_VIC_PHYS          0xC0000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM_CSR_BASE          0xE0001000
-#define MSM_CSR_PHYS          0xC0100000
-#define MSM_CSR_SIZE          SZ_4K
-
-#define MSM_GPT_PHYS          MSM_CSR_PHYS
-#define MSM_GPT_BASE          MSM_CSR_BASE
-#define MSM_GPT_SIZE          SZ_4K
-
-#define MSM_DMOV_BASE         0xE0002000
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM_UART1_BASE        0xE0003000
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_BASE        0xE0004000
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_BASE        0xE0005000
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_I2C_BASE          0xE0006000
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
-
-#define MSM_GPIO1_BASE        0xE0007000
-#define MSM_GPIO1_PHYS        0xA9200000
-#define MSM_GPIO1_SIZE        SZ_4K
-
-#define MSM_GPIO2_BASE        0xE0008000
-#define MSM_GPIO2_PHYS        0xA9300000
-#define MSM_GPIO2_SIZE        SZ_4K
-
-#define MSM_HSUSB_BASE        0xE0009000
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      0xE000A000
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_PMDH_BASE         0xE000B000
-#define MSM_PMDH_PHYS         0xAA600000
-#define MSM_PMDH_SIZE         SZ_4K
-
-#define MSM_EMDH_BASE         0xE000C000
-#define MSM_EMDH_PHYS         0xAA700000
-#define MSM_EMDH_SIZE         SZ_4K
-
-#define MSM_MDP_BASE          0xE0010000
-#define MSM_MDP_PHYS          0xAA200000
-#define MSM_MDP_SIZE          0x000F0000
-
-#define MSM_SHARED_RAM_BASE   0xE0100000
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#endif
diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h
deleted file mode 100644
index 7c5544bdd0c7..000000000000
--- a/include/asm-arm/arch-msm/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-msm/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <asm/hardware.h>
-
-void arch_idle(void);
-
-static inline void arch_reset(char mode)
-{
-	for (;;) ;  /* depends on IPC w/ other core */
-}
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
deleted file mode 100644
index 8724487ab4c9..000000000000
--- a/include/asm-arm/arch-msm/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-msm/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h
deleted file mode 100644
index e91ed786ffec..000000000000
--- a/include/asm-arm/arch-msm/uncompress.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/include/asm-arm/arch-msm/uncompress.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
-
-#include "hardware.h"
-
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-static inline void arch_decomp_wdog(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h
deleted file mode 100644
index 60f8d910e825..000000000000
--- a/include/asm-arm/arch-msm/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-msm/vmalloc.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_VMALLOC_H
-#define __ASM_ARCH_MSM_VMALLOC_H
-
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
-
-#endif
-
diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S
deleted file mode 100644
index d0595bd645e5..000000000000
--- a/include/asm-arm/arch-mv78xx0/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/mv78xx0.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
-	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/include/asm-arm/arch-mv78xx0/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S
deleted file mode 100644
index e9a606b12669..000000000000
--- a/include/asm-arm/arch-mv78xx0/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/mv78xx0.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h
deleted file mode 100644
index 8e17926086c6..000000000000
--- a/include/asm-arm/arch-mv78xx0/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO			0x00001000
-#define PCIBIOS_MIN_MEM			0x01000000
-#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h
deleted file mode 100644
index 415d4c98e3d1..000000000000
--- a/include/asm-arm/arch-mv78xx0/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
-					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h
deleted file mode 100644
index 75930450cd65..000000000000
--- a/include/asm-arm/arch-mv78xx0/irqs.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/irqs.h
- *
- * IRQ definitions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "mv78xx0.h"	/* need GPIO_MAX */
-
-/*
- * MV78xx0 Low Interrupt Controller
- */
-#define IRQ_MV78XX0_ERR		0
-#define IRQ_MV78XX0_SPI		1
-#define IRQ_MV78XX0_I2C_0	2
-#define IRQ_MV78XX0_I2C_1	3
-#define IRQ_MV78XX0_IDMA_0	4
-#define IRQ_MV78XX0_IDMA_1	5
-#define IRQ_MV78XX0_IDMA_2	6
-#define IRQ_MV78XX0_IDMA_3	7
-#define IRQ_MV78XX0_TIMER_0	8
-#define IRQ_MV78XX0_TIMER_1	9
-#define IRQ_MV78XX0_TIMER_2	10
-#define IRQ_MV78XX0_TIMER_3	11
-#define IRQ_MV78XX0_UART_0	12
-#define IRQ_MV78XX0_UART_1	13
-#define IRQ_MV78XX0_UART_2	14
-#define IRQ_MV78XX0_UART_3	15
-#define IRQ_MV78XX0_USB_0	16
-#define IRQ_MV78XX0_USB_1	17
-#define IRQ_MV78XX0_USB_2	18
-#define IRQ_MV78XX0_CRYPTO	19
-#define IRQ_MV78XX0_SDIO_0	20
-#define IRQ_MV78XX0_SDIO_1	21
-#define IRQ_MV78XX0_XOR_0	22
-#define IRQ_MV78XX0_XOR_1	23
-#define IRQ_MV78XX0_I2S_0	24
-#define IRQ_MV78XX0_I2S_1	25
-#define IRQ_MV78XX0_SATA	26
-#define IRQ_MV78XX0_TDMI	27
-
-/*
- * MV78xx0 High Interrupt Controller
- */
-#define IRQ_MV78XX0_PCIE_00	32
-#define IRQ_MV78XX0_PCIE_01	33
-#define IRQ_MV78XX0_PCIE_02	34
-#define IRQ_MV78XX0_PCIE_03	35
-#define IRQ_MV78XX0_PCIE_10	36
-#define IRQ_MV78XX0_PCIE_11	37
-#define IRQ_MV78XX0_PCIE_12	38
-#define IRQ_MV78XX0_PCIE_13	39
-#define IRQ_MV78XX0_GE00_SUM	40
-#define IRQ_MV78XX0_GE00_RX	41
-#define IRQ_MV78XX0_GE00_TX	42
-#define IRQ_MV78XX0_GE00_MISC	43
-#define IRQ_MV78XX0_GE01_SUM	44
-#define IRQ_MV78XX0_GE01_RX	45
-#define IRQ_MV78XX0_GE01_TX	46
-#define IRQ_MV78XX0_GE01_MISC	47
-#define IRQ_MV78XX0_GE10_SUM	48
-#define IRQ_MV78XX0_GE10_RX	49
-#define IRQ_MV78XX0_GE10_TX	50
-#define IRQ_MV78XX0_GE10_MISC	51
-#define IRQ_MV78XX0_GE11_SUM	52
-#define IRQ_MV78XX0_GE11_RX	53
-#define IRQ_MV78XX0_GE11_TX	54
-#define IRQ_MV78XX0_GE11_MISC	55
-#define IRQ_MV78XX0_GPIO_0_7	56
-#define IRQ_MV78XX0_GPIO_8_15	57
-#define IRQ_MV78XX0_GPIO_16_23	58
-#define IRQ_MV78XX0_GPIO_24_31	59
-#define IRQ_MV78XX0_DB_IN	60
-#define IRQ_MV78XX0_DB_OUT	61
-
-/*
- * MV78XX0 General Purpose Pins
- */
-#define IRQ_MV78XX0_GPIO_START	64
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h
deleted file mode 100644
index 721a6b185b91..000000000000
--- a/include/asm-arm/arch-mv78xx0/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET		UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h
deleted file mode 100644
index 9f5d83c73faa..000000000000
--- a/include/asm-arm/arch-mv78xx0/mv78xx0.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/mv78xx0.h
- *
- * Generic definitions for Marvell MV78xx0 SoC flavors:
- *  MV781x0 and MV782x0.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MV78XX0_H
-#define __ASM_ARCH_MV78XX0_H
-
-/*
- * Marvell MV78xx0 address maps.
- *
- * phys
- * c0000000	PCIe Memory space
- * f0800000	PCIe #0 I/O space
- * f0900000	PCIe #1 I/O space
- * f0a00000	PCIe #2 I/O space
- * f0b00000	PCIe #3 I/O space
- * f0c00000	PCIe #4 I/O space
- * f0d00000	PCIe #5 I/O space
- * f0e00000	PCIe #6 I/O space
- * f0f00000	PCIe #7 I/O space
- * f1000000	on-chip peripheral registers
- *
- * virt		phys		size
- * fe400000	f102x000	16K	core-specific peripheral registers
- * fe700000	f0800000	1M	PCIe #0 I/O space
- * fe800000	f0900000	1M	PCIe #1 I/O space
- * fe900000	f0a00000	1M	PCIe #2 I/O space
- * fea00000	f0b00000	1M	PCIe #3 I/O space
- * feb00000	f0c00000	1M	PCIe #4 I/O space
- * fec00000	f0d00000	1M	PCIe #5 I/O space
- * fed00000	f0e00000	1M	PCIe #6 I/O space
- * fee00000	f0f00000	1M	PCIe #7 I/O space
- * fef00000	f1000000	1M	on-chip peripheral registers
- */
-#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
-#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
-#define MV78XX0_CORE_REGS_SIZE		SZ_16K
-
-#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_SIZE		SZ_1M
-
-#define MV78XX0_REGS_PHYS_BASE		0xf1000000
-#define MV78XX0_REGS_VIRT_BASE		0xfef00000
-#define MV78XX0_REGS_SIZE		SZ_1M
-
-#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
-#define MV78XX0_PCIE_MEM_SIZE		0x30000000
-
-/*
- * Core-specific peripheral registers.
- */
-#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   L2_WRITETHROUGH	0x00020000
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0008
-#define   IRQ_MASK_LOW_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1700)
-
-#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
-
-
-#define GPIO_MAX		32
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h
deleted file mode 100644
index 7eb47d376db9..000000000000
--- a/include/asm-arm/arch-mv78xx0/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/mv78xx0.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h
deleted file mode 100644
index a854b1ccbd01..000000000000
--- a/include/asm-arm/arch-mv78xx0/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h
deleted file mode 100644
index 3bfe0a293ef7..000000000000
--- a/include/asm-arm/arch-mv78xx0/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/mv78xx0.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h
deleted file mode 100644
index f2c512197579..000000000000
--- a/include/asm-arm/arch-mv78xx0/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-mv78xx0/vmalloc.h
- */
-
-#define VMALLOC_END	0xfe000000
diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/include/asm-arm/arch-mxc/board-mx27ads.h
deleted file mode 100644
index 61e66dac90ef..000000000000
--- a/include/asm-arm/arch-mxc/board-mx27ads.h
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-
-/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE		(MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
-
-#define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 2)
-
-#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
-				MXC_MAX_VIRTUAL_INTS)
-
-/*
- * MXC UART EVB board level configurations
- */
-
-#define MXC_LL_EXTUART_PADDR	(CS4_BASE_ADDR + 0x20000)
-#define MXC_LL_EXTUART_VADDR	(CS4_BASE_ADDR_VIRT + 0x20000)
-#define MXC_LL_EXTUART_16BIT_BUS
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
-/*
- * @name Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE          SZ_128M
-
-/*
- * PBC Controller parameters
- */
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xEB000000
-#define PBC_REG_ADDR(offset)    (PBC_BASE_ADDRESS + (offset))
-
-/*
- * PBC Interupt name definitions
- */
-#define PBC_GPIO1_0  0
-#define PBC_GPIO1_1  1
-#define PBC_GPIO1_2  2
-#define PBC_GPIO1_3  3
-#define PBC_GPIO1_4  4
-#define PBC_GPIO1_5  5
-
-#define PBC_INTR_MAX_NUM 6
-#define PBC_INTR_SHARED_MAX_NUM 8
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 set address.
- */
-#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 clear address.
- */
-#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 clear address.
- */
-#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 4 clear address.
- */
-#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
-/*PBC_ADDR_SH
- * PBC Board status register 1.
- */
-#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt status register.
- */
-#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt current status register.
- */
-#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register set address.
- */
-#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register clear address.
- */
-#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
-/*
- * External UART A.
- */
-#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Status.
- */
-#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Set.
- */
-#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Clear.
- */
-#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller IO base address.
- */
-#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller Memory base address.
- */
-#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller DMA base address.
- */
-#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
-
-/* PBC Board Version Register bit definition */
-#define PBC_VERSION_ADS         0x8000	/* Bit15=1 means version for ads */
-#define PBC_VERSION_EVB_REVB    0x4000	/* BIT14=1 means version for evb revb */
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_ERST         0x0001	/* Ethernet Reset */
-#define PBC_BCTRL1_URST         0x0002	/* Reset External UART controller */
-#define PBC_BCTRL1_FRST         0x0004	/* FEC Reset */
-#define PBC_BCTRL1_ESLEEP       0x0010	/* Enable ethernet Sleep */
-#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
-
-/* PBC Board Control Register 2 bit definitions */
-#define PBC_BCTRL2_VCC_EN       0x0004	/*   Enable VCC */
-#define PBC_BCTRL2_VPP_EN       0x0008	/*   Enable Vpp */
-#define PBC_BCTRL2_ATAFEC_EN    0X0010
-#define PBC_BCTRL2_ATAFEC_SEL   0X0020
-#define PBC_BCTRL2_ATA_EN       0X0040
-#define PBC_BCTRL2_IRDA_SD      0X0080
-#define PBC_BCTRL2_IRDA_EN      0X0100
-#define PBC_BCTRL2_CCTL10       0X0200
-#define PBC_BCTRL2_CCTL11       0X0400
-
-/* PBC Board Control Register 3 bit definitions */
-#define PBC_BCTRL3_HSH_EN       0X0020
-#define PBC_BCTRL3_FSH_MOD      0X0040
-#define PBC_BCTRL3_OTG_HS_EN    0X0080
-#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
-#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
-#define PBC_BCTRL3_USB_OTG_ON   0X0800
-#define PBC_BCTRL3_USB_FSH_ON   0X1000
-
-/* PBC Board Control Register 4 bit definitions */
-#define PBC_BCTRL4_REGEN_SEL    0X0001
-#define PBC_BCTRL4_USER_OFF     0X0002
-#define PBC_BCTRL4_VIB_EN       0X0004
-#define PBC_BCTRL4_PWRGT1_EN    0X0008
-#define PBC_BCTRL4_PWRGT2_EN    0X0010
-#define PBC_BCTRL4_STDBY_PRI    0X0020
-
-#ifndef __ASSEMBLY__
-/*
- * Enumerations for SD cards and memory stick card. This corresponds to
- * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
- */
-enum mxc_card_no {
-	MXC_CARD_SD2 = 0,
-	MXC_CARD_SD3,
-	MXC_CARD_MS,
-	MXC_CARD_SD1,
-	MXC_CARD_MIN = MXC_CARD_SD2,
-	MXC_CARD_MAX = MXC_CARD_SD1,
-};
-#endif
-
-#define MXC_CPLD_VER_1_50       0x01
-
-/*
- * PBC BSTAT Register bit definitions
- */
-#define PBC_BSTAT_PRI_INT       0X0001
-#define PBC_BSTAT_USB_BYP       0X0002
-#define PBC_BSTAT_ATA_IOCS16    0X0004
-#define PBC_BSTAT_ATA_CBLID     0X0008
-#define PBC_BSTAT_ATA_DASP      0X0010
-#define PBC_BSTAT_PWR_RDY       0X0020
-#define PBC_BSTAT_SD3_WP        0X0100
-#define PBC_BSTAT_SD2_WP        0X0200
-#define PBC_BSTAT_SD1_WP        0X0400
-#define PBC_BSTAT_SD3_DET       0X0800
-#define PBC_BSTAT_SD2_DET       0X1000
-#define PBC_BSTAT_SD1_DET       0X2000
-#define PBC_BSTAT_MS_DET        0X4000
-#define PBC_BSTAT_SD3_DET_BIT   11
-#define PBC_BSTAT_SD2_DET_BIT   12
-#define PBC_BSTAT_SD1_DET_BIT   13
-#define PBC_BSTAT_MS_DET_BIT    14
-#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
-				 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
-				 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
-				 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
-					0x0))))
-
-/*
- * PBC UART Control Register bit definitions
- */
-#define PBC_UCTRL_DCE_DCD       0X0001
-#define PBC_UCTRL_DCE_DSR       0X0002
-#define PBC_UCTRL_DCE_RI        0X0004
-#define PBC_UCTRL_DTE_DTR       0X0100
-
-/*
- * PBC UART Status Register bit definitions
- */
-#define PBC_USTAT_DTE_DCD       0X0001
-#define PBC_USTAT_DTE_DSR       0X0002
-#define PBC_USTAT_DTE_RI        0X0004
-#define PBC_USTAT_DCE_DTR       0X0100
-
-/*
- * PBC Interupt mask register bit definitions
- */
-#define PBC_INTR_SD3_R_EN_BIT   4
-#define PBC_INTR_SD2_R_EN_BIT   0
-#define PBC_INTR_SD1_R_EN_BIT   6
-#define PBC_INTR_MS_R_EN_BIT    5
-#define PBC_INTR_SD3_EN_BIT     13
-#define PBC_INTR_SD2_EN_BIT     12
-#define PBC_INTR_MS_EN_BIT      14
-#define PBC_INTR_SD1_EN_BIT     15
-
-#define PBC_INTR_SD2_R_EN       0x0001
-#define PBC_INTR_LOW_BAT        0X0002
-#define PBC_INTR_OTG_FSOVER     0X0004
-#define PBC_INTR_FSH_OVER       0X0008
-#define PBC_INTR_SD3_R_EN       0x0010
-#define PBC_INTR_MS_R_EN        0x0020
-#define PBC_INTR_SD1_R_EN       0x0040
-#define PBC_INTR_FEC_INT        0X0080
-#define PBC_INTR_ENET_INT       0X0100
-#define PBC_INTR_OTGFS_INT      0X0200
-#define PBC_INTR_XUART_INT      0X0400
-#define PBC_INTR_CCTL12         0X0800
-#define PBC_INTR_SD2_EN         0x1000
-#define PBC_INTR_SD3_EN         0x2000
-#define PBC_INTR_MS_EN          0x4000
-#define PBC_INTR_SD1_EN         0x8000
-
-
-
-/* For interrupts like xuart, enet etc */
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
-#define MXC_MAX_EXP_IO_LINES    16
-
-/*
- * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
- *
- */
-#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
-
-/*
- * This is System IRQ used by CS8900A for interrupt generation
- * taken from platform.h
- */
-#define CS8900AIRQ              EXPIO_INT_ENET_INT
-/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
-#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
-
-#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
-
-/*
-* This is used to detect if the CPLD version is for mx27 evb board rev-a
-*/
-#define PBC_CPLD_VERSION_IS_REVA() \
-	((__raw_readw(PBC_VERSION_REG) & \
-	(PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
-	== 0)
-
-/* This is used to active or inactive ata signal in CPLD .
- *  It is dependent with hardware
- */
-#define PBC_ATA_SIGNAL_ACTIVE() \
-	__raw_writew(           \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_CLEAR_REG)
-
-#define PBC_ATA_SIGNAL_INACTIVE() \
-	__raw_writew(  \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_SET_REG)
-
-#define MXC_BD_LED1             (1 << 5)
-#define MXC_BD_LED2             (1 << 6)
-#define MXC_BD_LED_ON(led) \
-	__raw_writew(led, PBC_BCTRL1_SET_REG)
-#define MXC_BD_LED_OFF(led) \
-	__raw_writew(led, PBC_BCTRL1_CLEAR_REG)
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h
deleted file mode 100644
index 1bc6fb0f9a83..000000000000
--- a/include/asm-arm/arch-mxc/board-mx31ads.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
-/* Offsets for the PBC Controller register */
-
-/* PBC Board status register offset */
-#define PBC_BSTAT               0x000002
-
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET          0x000004
-
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR        0x000006
-
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET          0x000008
-
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR        0x00000A
-
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET          0x00000C
-
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR        0x00000E
-
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET          0x000010
-
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR        0x000012
-
-/* PBC Board status register 1 */
-#define PBC_BSTAT1              0x000014
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE      0x020000
-
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE     0x021000
-
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE     0x022000
-
-/* External chip select 0 */
-#define PBC_XCS0                0x040000
-
-/* LCD Display enable */
-#define PBC_LCD_EN_B            0x060000
-
-/* Code test debug enable */
-#define PBC_CODE_B              0x070000
-
-/* PSRAM memory select */
-#define PBC_PSRAM_B             0x5000000
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/include/asm-arm/arch-mxc/board-mx31lite.h
deleted file mode 100644
index e4e5cf5ad7db..000000000000
--- a/include/asm-arm/arch-mxc/board-mx31lite.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE		SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE	SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE		(SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
-
diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/include/asm-arm/arch-mxc/board-pcm037.h
deleted file mode 100644
index 82232ba3c8fc..000000000000
--- a/include/asm-arm/arch-mxc/board-pcm037.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
-#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h
deleted file mode 100644
index 750c62afd90f..000000000000
--- a/include/asm-arm/arch-mxc/board-pcm038.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
-#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside pcm038_init().
- *
- * This example here is for the development board. Refer pcm970-baseboard.c
- */
-
-extern void pcm970_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/include/asm-arm/arch-mxc/clock.h b/include/asm-arm/arch-mxc/clock.h
deleted file mode 100644
index 24caa2b7c91d..000000000000
--- a/include/asm-arm/arch-mxc/clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_CLOCK_H__
-#define __ASM_ARCH_MXC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-struct module;
-
-struct clk {
-	struct list_head node;
-	struct module *owner;
-	const char *name;
-	int id;
-	/* Source clock this clk depends on */
-	struct clk *parent;
-	/* Secondary clock to enable/disable with this clock */
-	struct clk *secondary;
-	/* Reference count of clock enable/disable */
-	__s8 usecount;
-	/* Register bit position for clock's enable/disable control. */
-	u8 enable_shift;
-	/* Register address for clock's enable/disable control. */
-	u32 enable_reg;
-	u32 flags;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h
deleted file mode 100644
index a6d2e24aab15..000000000000
--- a/include/asm-arm/arch-mxc/common.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_COMMON_H__
-#define __ASM_ARCH_MXC_COMMON_H__
-
-extern void mxc_map_io(void);
-extern void mxc_init_irq(void);
-extern void mxc_timer_init(const char *clk_timer);
-extern int mxc_clocks_init(unsigned long fref);
-extern int mxc_register_gpios(void);
-
-#endif
diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S
deleted file mode 100644
index 575087f8561a..000000000000
--- a/include/asm-arm/arch-mxc/debug-macro.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/include/asm-arm/arch-imx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <asm/arch/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <asm/arch/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <asm/arch/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <asm/arch/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <asm/arch/board-pcm038.h>
-#endif
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
-		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h
deleted file mode 100644
index c822d569a05e..000000000000
--- a/include/asm-arm/arch-mxc/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#endif
diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/include/asm-arm/arch-mxc/entry-macro.S
deleted file mode 100644
index b542433afb1b..000000000000
--- a/include/asm-arm/arch-mxc/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-	@ this macro disables fast irq (not implemented)
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	@ this macro checks which interrupt occured
-	@ and returns its number in irqnr
-	@ and returns if an interrupt occured in irqstat
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
-	@ Load offset & priority of the highest priority
-	@ interrupt pending from AVIC_NIVECSR
-	ldr	\irqstat, [\base, #0x40]
-	@ Shift to get the decoded IRQ number, using ASR so
-	@ 'no interrupt pending' becomes 0xffffffff
-	mov	\irqnr, \irqstat, asr #16
-	@ set zero flag if IRQ + 1 == 0
-	adds	\tmp, \irqnr, #1
-	.endm
-
-	@ irq priority table (not used)
-	.macro	irq_prio_table
-	.endm
diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h
deleted file mode 100644
index d393e15f5a6b..000000000000
--- a/include/asm-arm/arch-mxc/gpio.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_GPIO_H__
-#define __ASM_ARCH_MXC_GPIO_H__
-
-#include <asm/hardware.h>
-#include <asm-generic/gpio.h>
-
-/* use gpiolib dispatchers */
-#define gpio_get_value		__gpio_get_value
-#define gpio_set_value		__gpio_set_value
-#define gpio_cansleep		__gpio_cansleep
-
-#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
-#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
-
-struct mxc_gpio_port {
-	void __iomem *base;
-	int irq;
-	int virtual_irq_start;
-	struct gpio_chip chip;
-};
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
-#endif
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
deleted file mode 100644
index 37cddbaaade7..000000000000
--- a/include/asm-arm/arch-mxc/hardware.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#define __ASM_ARCH_MXC_HARDWARE_H__
-
-#include <asm/sizes.h>
-
-#ifdef CONFIG_ARCH_MX3
-# include <asm/arch/mx31.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-# ifdef CONFIG_MACH_MX27
-#  include <asm/arch/mx27.h>
-# endif
-#endif
-
-#include <asm/arch/mxc.h>
-
-#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/iim.h b/include/asm-arm/arch-mxc/iim.h
deleted file mode 100644
index 315bffadafda..000000000000
--- a/include/asm-arm/arch-mxc/iim.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_IIM_H__
-#define __ASM_ARCH_MXC_IIM_H__
-
-/* Register offsets */
-#define MXC_IIMSTAT             0x0000
-#define MXC_IIMSTATM            0x0004
-#define MXC_IIMERR              0x0008
-#define MXC_IIMEMASK            0x000C
-#define MXC_IIMFCTL             0x0010
-#define MXC_IIMUA               0x0014
-#define MXC_IIMLA               0x0018
-#define MXC_IIMSDAT             0x001C
-#define MXC_IIMPREV             0x0020
-#define MXC_IIMSREV             0x0024
-#define MXC_IIMPRG_P            0x0028
-#define MXC_IIMSCS0             0x002C
-#define MXC_IIMSCS1             0x0030
-#define MXC_IIMSCS2             0x0034
-#define MXC_IIMSCS3             0x0038
-#define MXC_IIMFBAC0            0x0800
-#define MXC_IIMJAC              0x0804
-#define MXC_IIMHWV1             0x0808
-#define MXC_IIMHWV2             0x080C
-#define MXC_IIMHAB0             0x0810
-#define MXC_IIMHAB1             0x0814
-/* Definitions for i.MX27 TO2 */
-#define MXC_IIMMAC              0x0814
-#define MXC_IIMPREV_FUSE        0x0818
-#define MXC_IIMSREV_FUSE        0x081C
-#define MXC_IIMSJC_CHALL_0      0x0820
-#define MXC_IIMSJC_CHALL_7      0x083C
-#define MXC_IIMFB0UC17          0x0840
-#define MXC_IIMFB0UC255         0x0BFC
-#define MXC_IIMFBAC1            0x0C00
-/* Definitions for i.MX27 TO2 */
-#define MXC_IIMSUID             0x0C04
-#define MXC_IIMKEY0             0x0C04
-#define MXC_IIMKEY20            0x0C54
-#define MXC_IIMSJC_RESP_0       0x0C58
-#define MXC_IIMSJC_RESP_7       0x0C74
-#define MXC_IIMFB1UC30          0x0C78
-#define MXC_IIMFB1UC255         0x0FFC
-
-/* Bit definitions */
-
-#define MXC_IIMHWV1_WLOCK               (0x1 << 7)
-#define MXC_IIMHWV1_MCU_ENDIAN          (0x1 << 6)
-#define MXC_IIMHWV1_DSP_ENDIAN          (0x1 << 5)
-#define MXC_IIMHWV1_BOOT_INT            (0x1 << 4)
-#define MXC_IIMHWV1_SCC_DISABLE         (0x1 << 3)
-#define MXC_IIMHWV1_HANTRO_DISABLE      (0x1 << 2)
-#define MXC_IIMHWV1_MEMSTICK_DIS        (0x1 << 1)
-
-#define MXC_IIMHWV2_WLOCK               (0x1 << 7)
-#define MXC_IIMHWV2_BP_SDMA             (0x1 << 6)
-#define MXC_IIMHWV2_SCM_DCM             (0x1 << 5)
-
-#endif /* __ASM_ARCH_MXC_IIM_H__ */
diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/include/asm-arm/arch-mxc/imx-uart.h
deleted file mode 100644
index 83fb72c4048a..000000000000
--- a/include/asm-arm/arch-mxc/imx-uart.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-};
-
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
-
-#endif
diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h
deleted file mode 100644
index 65b6810124c1..000000000000
--- a/include/asm-arm/arch-mxc/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IO_H__
-#define __ASM_ARCH_MXC_IO_H__
-
-/* Allow IO space to be anywhere in the memory */
-#define IO_SPACE_LIMIT 0xffffffff
-
-/* io address mapping macro */
-#define __io(a)			((void __iomem *)(a))
-
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
deleted file mode 100644
index 076d37b38eb2..000000000000
--- a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef _MXC_GPIO_MX1_MX2_H
-#define _MXC_GPIO_MX1_MX2_H
-
-#include <linux/io.h>
-
-#define MXC_GPIO_ALLOC_MODE_NORMAL	0
-#define MXC_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define MXC_GPIO_ALLOC_MODE_RELEASE	8
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x)    (0x00 + ((x) << 8))
-#define MXC_OCR1(x)    (0x04 + ((x) << 8))
-#define MXC_OCR2(x)    (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x)      (0x1c + ((x) << 8))
-#define MXC_GIUS(x)    (0x20 + ((x) << 8))
-#define MXC_SSR(x)     (0x24 + ((x) << 8))
-#define MXC_ICR1(x)    (0x28 + ((x) << 8))
-#define MXC_ICR2(x)    (0x2c + ((x) << 8))
-#define MXC_IMR(x)     (0x30 + ((x) << 8))
-#define MXC_ISR(x)     (0x34 + ((x) << 8))
-#define MXC_GPR(x)     (0x38 + ((x) << 8))
-#define MXC_SWR(x)     (0x3c + ((x) << 8))
-#define MXC_PUEN(x)    (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX  3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX  5
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT   (1 << 8)
-#define GPIO_IN    (0 << 8)
-#define GPIO_PUEN  (1 << 9)
-
-#define GPIO_PF    (1 << 10)
-#define GPIO_AF    (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-/*-------------------------------------------------------------------------*/
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC  (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
-#define PA1_PF_TIN           (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0          (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
-#define PA3_PF_CSI_MCLK      (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0        (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1        (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2        (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3        (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4        (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5        (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6       (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7       (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC    (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC    (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK   (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_I2C_SCL      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0           (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4          (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5          (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16          (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17          (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18          (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19          (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20          (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21          (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22          (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23          (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK  (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO        (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1       (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9)
-#define PB9_AF_MS_PI1        (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2      (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10)
-#define PB10_AF_MS_SCLKI     (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3      (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO      (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK       (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0     (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS        (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS     (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK    (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT    (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
-#define PB17_AF_SSI_TXDAT    (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
-#define PB18_AF_SSI_TXFS     (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK    (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE     (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE      (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PFUSBD_RCV      (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND  (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP      (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM      (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO     (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO     (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
-#define PB29_PF_UART2_RTS    (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
-#define PB30_PF_UART2_TXD    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
-#define PB31_PF_UART2_RXD    (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
-#define PC3_PF_SSI_RXFS      (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK     (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT     (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
-#define PC6_PF_SSI_TXDAT     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
-#define PC7_PF_SSI_TXFS      (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK     (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_UART1_RTS    (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
-#define PC11_PF_UART1_TXD    (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_UART1_RXD    (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
-#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK    (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS      (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO    (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI    (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI    (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX    (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX   (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
-#define PD7_PF_REV           (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR     (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK    (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS           (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD     (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS      (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS            (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI      (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR      (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
-#define PD10_AF_UART2_DSR    (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
-#define PD12_PF_ACD_OE       (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
-#define PD13_PF_LP_HSYNC     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
-#define PD14_PF_FLM_VSYNC    (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
-#define PD15_PF_LD0          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
-#define PD16_PF_LD1          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
-#define PD17_PF_LD2          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_LD3          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_PF_LD4          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
-#define PD20_PF_LD5          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
-#define PD21_PF_LD6          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
-#define PD22_PF_LD7          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
-#define PD23_PF_LD8          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
-#define PD24_PF_LD9          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
-#define PD25_PF_LD10         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
-#define PD26_PF_LD11         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
-#define PD27_PF_LD12         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
-#define PD28_PF_LD13         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
-#define PD29_PF_LD14         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
-#define PD30_PF_LD15         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
-#define PD31_PF_TMR2OUT      (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
-#define PA6_PF_LD0		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
-#define PA7_PF_LD1		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
-#define PA8_PF_LD2		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
-#define PA9_PF_LD3		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
-#define PA10_PF_LD4		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
-#define PA11_PF_LD5		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
-#define PA12_PF_LD6		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
-#define PA13_PF_LD7		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
-#define PA14_PF_LD8		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
-#define PA15_PF_LD9		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_LD10		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_PF_LD11		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
-#define PA18_PF_LD12		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
-#define PA19_PF_LD13		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
-#define PA20_PF_LD14		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
-#define PA21_PF_LD15		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
-#define PA22_PF_LD16		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
-#define PA23_PF_LD17		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
-#define PA24_PF_REV		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
-#define PA25_PF_CLS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
-#define PA26_PF_PS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
-#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
-#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
-#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
-#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
-#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
-#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
-#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
-#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
-#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 11)
-#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
-#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
-#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
-#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 13)
-#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
-#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
-#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
-#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
-#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
-#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
-#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
-#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 19)
-#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
-#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
-#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
-#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 21)
-#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_PF | 26)
-#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
-#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
-#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 31)
-#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 5)
-#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 6)
-#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 16)
-#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 17)
-#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 18)
-#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 19)
-#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 20)
-#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 21)
-#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 22)
-#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 23)
-#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 24)
-#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 25)
-#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 26)
-#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 27)
-#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 28)
-#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 29)
-#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 30)
-#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 31)
-#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
-#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
-#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
-#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
-#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
-#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
-#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
-#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
-#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
-#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
-#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
-#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
-#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
-#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
-#define PD14_AOUT_FEC_CLR	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
-#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
-#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
-#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 25)
-#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 26)
-#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 27)
-#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 28)
-#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 29)
-#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_IN | GPIO_PF  | 30)
-#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 31)
-#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
-#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
-#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
-#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
-#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 7)
-#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
-#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 9)
-#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
-#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 11)
-#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
-#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
-#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
-#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
-#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
-#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
-#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
-#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
-#endif
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
-
-#define IRQ_GPIOA(x)  (MXC_MAX_INT_LINES + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/include/asm-arm/arch-mxc/iomux-mx3.h
deleted file mode 100644
index 7509e7692f08..000000000000
--- a/include/asm-arm/arch-mxc/iomux-mx3.h
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MX31_IOMUX_H__
-#define __MACH_MX31_IOMUX_H__
-
-#include <linux/types.h>
-
-/*
- * various IOMUX output functions
- */
-
-#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
-#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
-#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
-#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
-#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
-#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
-#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
-#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
-#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
-#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
-#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
-#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
-#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
-
-#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
-#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
-#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
-#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
-
-/*
- * various IOMUX pad functions
- */
-enum iomux_pad_config {
-	PAD_CTL_NOLOOPBACK	= 0x0 << 9,
-	PAD_CTL_LOOPBACK	= 0x1 << 9,
-	PAD_CTL_PKE_NONE	= 0x0 << 8,
-	PAD_CTL_PKE_ENABLE	= 0x1 << 8,
-	PAD_CTL_PUE_KEEPER	= 0x0 << 7,
-	PAD_CTL_PUE_PUD		= 0x1 << 7,
-	PAD_CTL_100K_PD		= 0x0 << 5,
-	PAD_CTL_100K_PU		= 0x1 << 5,
-	PAD_CTL_47K_PU		= 0x2 << 5,
-	PAD_CTL_22K_PU		= 0x3 << 5,
-	PAD_CTL_HYS_CMOS	= 0x0 << 4,
-	PAD_CTL_HYS_SCHMITZ	= 0x1 << 4,
-	PAD_CTL_ODE_CMOS	= 0x0 << 3,
-	PAD_CTL_ODE_OpenDrain	= 0x1 << 3,
-	PAD_CTL_DRV_NORMAL	= 0x0 << 1,
-	PAD_CTL_DRV_HIGH	= 0x1 << 1,
-	PAD_CTL_DRV_MAX		= 0x2 << 1,
-	PAD_CTL_SRE_SLOW	= 0x0 << 0,
-	PAD_CTL_SRE_FAST	= 0x1 << 0
-};
-
-/*
- * various IOMUX general purpose functions
- */
-enum iomux_gp_func {
-	MUX_PGP_FIRI			= 1 << 0,
-	MUX_DDR_MODE			= 1 << 1,
-	MUX_PGP_CSPI_BB			= 1 << 2,
-	MUX_PGP_ATA_1			= 1 << 3,
-	MUX_PGP_ATA_2			= 1 << 4,
-	MUX_PGP_ATA_3			= 1 << 5,
-	MUX_PGP_ATA_4			= 1 << 6,
-	MUX_PGP_ATA_5			= 1 << 7,
-	MUX_PGP_ATA_6			= 1 << 8,
-	MUX_PGP_ATA_7			= 1 << 9,
-	MUX_PGP_ATA_8			= 1 << 10,
-	MUX_PGP_UH2			= 1 << 11,
-	MUX_SDCTL_CSD0_SEL		= 1 << 12,
-	MUX_SDCTL_CSD1_SEL		= 1 << 13,
-	MUX_CSPI1_UART3			= 1 << 14,
-	MUX_EXTDMAREQ2_MBX_SEL		= 1 << 15,
-	MUX_TAMPER_DETECT_EN		= 1 << 16,
-	MUX_PGP_USB_4WIRE		= 1 << 17,
-	MUX_PGB_USB_COMMON		= 1 << 18,
-	MUX_SDHC_MEMSTICK1		= 1 << 19,
-	MUX_SDHC_MEMSTICK2		= 1 << 20,
-	MUX_PGP_SPLL_BYP		= 1 << 21,
-	MUX_PGP_UPLL_BYP		= 1 << 22,
-	MUX_PGP_MSHC1_CLK_SEL		= 1 << 23,
-	MUX_PGP_MSHC2_CLK_SEL		= 1 << 24,
-	MUX_CSPI3_UART5_SEL		= 1 << 25,
-	MUX_PGP_ATA_9			= 1 << 26,
-	MUX_PGP_USB_SUSPEND		= 1 << 27,
-	MUX_PGP_USB_OTG_LOOPBACK	= 1 << 28,
-	MUX_PGP_USB_HS1_LOOPBACK	= 1 << 29,
-	MUX_PGP_USB_HS2_LOOPBACK	= 1 << 30,
-	MUX_CLKO_DDR_MODE		= 1 << 31,
-};
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void iomux_config_gpr(enum iomux_gp_func , bool);
-
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
-
-#define IOMUX_PADNUM_MASK	0x1ff
-#define IOMUX_GPIONUM_SHIFT	9
-#define IOMUX_GPIONUM_MASK	(0xff << IOMUX_GPIONUM_SHIFT)
-#define IOMUX_MODE_SHIFT	17
-#define IOMUX_MODE_MASK	(0xff << IOMUX_MODE_SHIFT)
-
-#define IOMUX_PIN(gpionum, padnum) \
-	(((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
-	 (padnum & IOMUX_PADNUM_MASK))
-
-#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
-
-#define IOMUX_TO_GPIO(iomux_pin) \
-	((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
-#define IOMUX_TO_IRQ(iomux_pin) \
-	(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
-	MXC_GPIO_INT_BASE)
-
-/*
- * This enumeration is constructed based on the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
- * value is constructed based on the rules described above.
- */
-
-enum iomux_pins {
-	MX31_PIN_TTM_PAD	= IOMUX_PIN(0xff,   0),
-	MX31_PIN_CSPI3_SPI_RDY	= IOMUX_PIN(0xff,   1),
-	MX31_PIN_CSPI3_SCLK	= IOMUX_PIN(0xff,   2),
-	MX31_PIN_CSPI3_MISO	= IOMUX_PIN(0xff,   3),
-	MX31_PIN_CSPI3_MOSI	= IOMUX_PIN(0xff,   4),
-	MX31_PIN_CLKSS		= IOMUX_PIN(0xff,   5),
-	MX31_PIN_CE_CONTROL	= IOMUX_PIN(0xff,   6),
-	MX31_PIN_ATA_RESET_B	= IOMUX_PIN(95,     7),
-	MX31_PIN_ATA_DMACK	= IOMUX_PIN(94,     8),
-	MX31_PIN_ATA_DIOW	= IOMUX_PIN(93,     9),
-	MX31_PIN_ATA_DIOR	= IOMUX_PIN(92,    10),
-	MX31_PIN_ATA_CS1	= IOMUX_PIN(91,    11),
-	MX31_PIN_ATA_CS0	= IOMUX_PIN(90,    12),
-	MX31_PIN_SD1_DATA3	= IOMUX_PIN(63,    13),
-	MX31_PIN_SD1_DATA2	= IOMUX_PIN(62,    14),
-	MX31_PIN_SD1_DATA1	= IOMUX_PIN(61,    15),
-	MX31_PIN_SD1_DATA0	= IOMUX_PIN(60,    16),
-	MX31_PIN_SD1_CLK	= IOMUX_PIN(59,    17),
-	MX31_PIN_SD1_CMD	= IOMUX_PIN(58,    18),
-	MX31_PIN_D3_SPL		= IOMUX_PIN(0xff,  19),
-	MX31_PIN_D3_CLS		= IOMUX_PIN(0xff,  20),
-	MX31_PIN_D3_REV		= IOMUX_PIN(0xff,  21),
-	MX31_PIN_CONTRAST	= IOMUX_PIN(0xff,  22),
-	MX31_PIN_VSYNC3		= IOMUX_PIN(0xff,  23),
-	MX31_PIN_READ		= IOMUX_PIN(0xff,  24),
-	MX31_PIN_WRITE		= IOMUX_PIN(0xff,  25),
-	MX31_PIN_PAR_RS		= IOMUX_PIN(0xff,  26),
-	MX31_PIN_SER_RS		= IOMUX_PIN(89,    27),
-	MX31_PIN_LCS1		= IOMUX_PIN(88,    28),
-	MX31_PIN_LCS0		= IOMUX_PIN(87,    29),
-	MX31_PIN_SD_D_CLK	= IOMUX_PIN(86,    30),
-	MX31_PIN_SD_D_IO	= IOMUX_PIN(85,    31),
-	MX31_PIN_SD_D_I		= IOMUX_PIN(84,    32),
-	MX31_PIN_DRDY0		= IOMUX_PIN(0xff,  33),
-	MX31_PIN_FPSHIFT	= IOMUX_PIN(0xff,  34),
-	MX31_PIN_HSYNC		= IOMUX_PIN(0xff,  35),
-	MX31_PIN_VSYNC0		= IOMUX_PIN(0xff,  36),
-	MX31_PIN_LD17		= IOMUX_PIN(0xff,  37),
-	MX31_PIN_LD16		= IOMUX_PIN(0xff,  38),
-	MX31_PIN_LD15		= IOMUX_PIN(0xff,  39),
-	MX31_PIN_LD14		= IOMUX_PIN(0xff,  40),
-	MX31_PIN_LD13		= IOMUX_PIN(0xff,  41),
-	MX31_PIN_LD12		= IOMUX_PIN(0xff,  42),
-	MX31_PIN_LD11		= IOMUX_PIN(0xff,  43),
-	MX31_PIN_LD10		= IOMUX_PIN(0xff,  44),
-	MX31_PIN_LD9		= IOMUX_PIN(0xff,  45),
-	MX31_PIN_LD8		= IOMUX_PIN(0xff,  46),
-	MX31_PIN_LD7		= IOMUX_PIN(0xff,  47),
-	MX31_PIN_LD6		= IOMUX_PIN(0xff,  48),
-	MX31_PIN_LD5		= IOMUX_PIN(0xff,  49),
-	MX31_PIN_LD4		= IOMUX_PIN(0xff,  50),
-	MX31_PIN_LD3		= IOMUX_PIN(0xff,  51),
-	MX31_PIN_LD2		= IOMUX_PIN(0xff,  52),
-	MX31_PIN_LD1		= IOMUX_PIN(0xff,  53),
-	MX31_PIN_LD0		= IOMUX_PIN(0xff,  54),
-	MX31_PIN_USBH2_DATA1	= IOMUX_PIN(0xff,  55),
-	MX31_PIN_USBH2_DATA0	= IOMUX_PIN(0xff,  56),
-	MX31_PIN_USBH2_NXT	= IOMUX_PIN(0xff,  57),
-	MX31_PIN_USBH2_STP	= IOMUX_PIN(0xff,  58),
-	MX31_PIN_USBH2_DIR	= IOMUX_PIN(0xff,  59),
-	MX31_PIN_USBH2_CLK	= IOMUX_PIN(0xff,  60),
-	MX31_PIN_USBOTG_DATA7	= IOMUX_PIN(0xff,  61),
-	MX31_PIN_USBOTG_DATA6	= IOMUX_PIN(0xff,  62),
-	MX31_PIN_USBOTG_DATA5	= IOMUX_PIN(0xff,  63),
-	MX31_PIN_USBOTG_DATA4	= IOMUX_PIN(0xff,  64),
-	MX31_PIN_USBOTG_DATA3	= IOMUX_PIN(0xff,  65),
-	MX31_PIN_USBOTG_DATA2	= IOMUX_PIN(0xff,  66),
-	MX31_PIN_USBOTG_DATA1	= IOMUX_PIN(0xff,  67),
-	MX31_PIN_USBOTG_DATA0	= IOMUX_PIN(0xff,  68),
-	MX31_PIN_USBOTG_NXT	= IOMUX_PIN(0xff,  69),
-	MX31_PIN_USBOTG_STP	= IOMUX_PIN(0xff,  70),
-	MX31_PIN_USBOTG_DIR	= IOMUX_PIN(0xff,  71),
-	MX31_PIN_USBOTG_CLK	= IOMUX_PIN(0xff,  72),
-	MX31_PIN_USB_BYP	= IOMUX_PIN(31,    73),
-	MX31_PIN_USB_OC		= IOMUX_PIN(30,    74),
-	MX31_PIN_USB_PWR	= IOMUX_PIN(29,    75),
-	MX31_PIN_SJC_MOD	= IOMUX_PIN(0xff,  76),
-	MX31_PIN_DE_B		= IOMUX_PIN(0xff,  77),
-	MX31_PIN_TRSTB		= IOMUX_PIN(0xff,  78),
-	MX31_PIN_TDO		= IOMUX_PIN(0xff,  79),
-	MX31_PIN_TDI		= IOMUX_PIN(0xff,  80),
-	MX31_PIN_TMS		= IOMUX_PIN(0xff,  81),
-	MX31_PIN_TCK		= IOMUX_PIN(0xff,  82),
-	MX31_PIN_RTCK		= IOMUX_PIN(0xff,  83),
-	MX31_PIN_KEY_COL7	= IOMUX_PIN(57,    84),
-	MX31_PIN_KEY_COL6	= IOMUX_PIN(56,    85),
-	MX31_PIN_KEY_COL5	= IOMUX_PIN(55,    86),
-	MX31_PIN_KEY_COL4	= IOMUX_PIN(54,    87),
-	MX31_PIN_KEY_COL3	= IOMUX_PIN(0xff,  88),
-	MX31_PIN_KEY_COL2	= IOMUX_PIN(0xff,  89),
-	MX31_PIN_KEY_COL1	= IOMUX_PIN(0xff,  90),
-	MX31_PIN_KEY_COL0	= IOMUX_PIN(0xff,  91),
-	MX31_PIN_KEY_ROW7	= IOMUX_PIN(53,    92),
-	MX31_PIN_KEY_ROW6	= IOMUX_PIN(52,    93),
-	MX31_PIN_KEY_ROW5	= IOMUX_PIN(51,    94),
-	MX31_PIN_KEY_ROW4	= IOMUX_PIN(50,    95),
-	MX31_PIN_KEY_ROW3	= IOMUX_PIN(0xff,  96),
-	MX31_PIN_KEY_ROW2	= IOMUX_PIN(0xff,  97),
-	MX31_PIN_KEY_ROW1	= IOMUX_PIN(0xff,  98),
-	MX31_PIN_KEY_ROW0	= IOMUX_PIN(0xff,  99),
-	MX31_PIN_BATT_LINE	= IOMUX_PIN(49,   100),
-	MX31_PIN_CTS2		= IOMUX_PIN(0xff, 101),
-	MX31_PIN_RTS2		= IOMUX_PIN(0xff, 102),
-	MX31_PIN_TXD2		= IOMUX_PIN(28,   103),
-	MX31_PIN_RXD2		= IOMUX_PIN(27,   104),
-	MX31_PIN_DTR_DCE2	= IOMUX_PIN(48,   105),
-	MX31_PIN_DCD_DTE1	= IOMUX_PIN(47,   106),
-	MX31_PIN_RI_DTE1	= IOMUX_PIN(46,   107),
-	MX31_PIN_DSR_DTE1	= IOMUX_PIN(45,   108),
-	MX31_PIN_DTR_DTE1	= IOMUX_PIN(44,   109),
-	MX31_PIN_DCD_DCE1	= IOMUX_PIN(43,   110),
-	MX31_PIN_RI_DCE1	= IOMUX_PIN(42,   111),
-	MX31_PIN_DSR_DCE1	= IOMUX_PIN(41,   112),
-	MX31_PIN_DTR_DCE1	= IOMUX_PIN(40,   113),
-	MX31_PIN_CTS1		= IOMUX_PIN(39,   114),
-	MX31_PIN_RTS1		= IOMUX_PIN(38,   115),
-	MX31_PIN_TXD1		= IOMUX_PIN(37,   116),
-	MX31_PIN_RXD1		= IOMUX_PIN(36,   117),
-	MX31_PIN_CSPI2_SPI_RDY	= IOMUX_PIN(0xff, 118),
-	MX31_PIN_CSPI2_SCLK	= IOMUX_PIN(0xff, 119),
-	MX31_PIN_CSPI2_SS2	= IOMUX_PIN(0xff, 120),
-	MX31_PIN_CSPI2_SS1	= IOMUX_PIN(0xff, 121),
-	MX31_PIN_CSPI2_SS0	= IOMUX_PIN(0xff, 122),
-	MX31_PIN_CSPI2_MISO	= IOMUX_PIN(0xff, 123),
-	MX31_PIN_CSPI2_MOSI	= IOMUX_PIN(0xff, 124),
-	MX31_PIN_CSPI1_SPI_RDY	= IOMUX_PIN(0xff, 125),
-	MX31_PIN_CSPI1_SCLK	= IOMUX_PIN(0xff, 126),
-	MX31_PIN_CSPI1_SS2	= IOMUX_PIN(0xff, 127),
-	MX31_PIN_CSPI1_SS1	= IOMUX_PIN(0xff, 128),
-	MX31_PIN_CSPI1_SS0	= IOMUX_PIN(0xff, 129),
-	MX31_PIN_CSPI1_MISO	= IOMUX_PIN(0xff, 130),
-	MX31_PIN_CSPI1_MOSI	= IOMUX_PIN(0xff, 131),
-	MX31_PIN_SFS6		= IOMUX_PIN(26,   132),
-	MX31_PIN_SCK6		= IOMUX_PIN(25,   133),
-	MX31_PIN_SRXD6		= IOMUX_PIN(24,   134),
-	MX31_PIN_STXD6		= IOMUX_PIN(23,   135),
-	MX31_PIN_SFS5		= IOMUX_PIN(0xff, 136),
-	MX31_PIN_SCK5		= IOMUX_PIN(0xff, 137),
-	MX31_PIN_SRXD5		= IOMUX_PIN(22,   138),
-	MX31_PIN_STXD5		= IOMUX_PIN(21,   139),
-	MX31_PIN_SFS4		= IOMUX_PIN(0xff, 140),
-	MX31_PIN_SCK4		= IOMUX_PIN(0xff, 141),
-	MX31_PIN_SRXD4		= IOMUX_PIN(20,   142),
-	MX31_PIN_STXD4		= IOMUX_PIN(19,   143),
-	MX31_PIN_SFS3		= IOMUX_PIN(0xff, 144),
-	MX31_PIN_SCK3		= IOMUX_PIN(0xff, 145),
-	MX31_PIN_SRXD3		= IOMUX_PIN(18,   146),
-	MX31_PIN_STXD3		= IOMUX_PIN(17,   147),
-	MX31_PIN_I2C_DAT	= IOMUX_PIN(0xff, 148),
-	MX31_PIN_I2C_CLK	= IOMUX_PIN(0xff, 149),
-	MX31_PIN_CSI_PIXCLK	= IOMUX_PIN(83,   150),
-	MX31_PIN_CSI_HSYNC	= IOMUX_PIN(82,   151),
-	MX31_PIN_CSI_VSYNC	= IOMUX_PIN(81,   152),
-	MX31_PIN_CSI_MCLK	= IOMUX_PIN(80,   153),
-	MX31_PIN_CSI_D15	= IOMUX_PIN(79,   154),
-	MX31_PIN_CSI_D14	= IOMUX_PIN(78,   155),
-	MX31_PIN_CSI_D13	= IOMUX_PIN(77,   156),
-	MX31_PIN_CSI_D12	= IOMUX_PIN(76,   157),
-	MX31_PIN_CSI_D11	= IOMUX_PIN(75,   158),
-	MX31_PIN_CSI_D10	= IOMUX_PIN(74,   159),
-	MX31_PIN_CSI_D9		= IOMUX_PIN(73,   160),
-	MX31_PIN_CSI_D8		= IOMUX_PIN(72,   161),
-	MX31_PIN_CSI_D7		= IOMUX_PIN(71,   162),
-	MX31_PIN_CSI_D6		= IOMUX_PIN(70,   163),
-	MX31_PIN_CSI_D5		= IOMUX_PIN(69,   164),
-	MX31_PIN_CSI_D4		= IOMUX_PIN(68,   165),
-	MX31_PIN_M_GRANT	= IOMUX_PIN(0xff, 166),
-	MX31_PIN_M_REQUEST	= IOMUX_PIN(0xff, 167),
-	MX31_PIN_PC_POE		= IOMUX_PIN(0xff, 168),
-	MX31_PIN_PC_RW_B	= IOMUX_PIN(0xff, 169),
-	MX31_PIN_IOIS16		= IOMUX_PIN(0xff, 170),
-	MX31_PIN_PC_RST		= IOMUX_PIN(0xff, 171),
-	MX31_PIN_PC_BVD2	= IOMUX_PIN(0xff, 172),
-	MX31_PIN_PC_BVD1	= IOMUX_PIN(0xff, 173),
-	MX31_PIN_PC_VS2		= IOMUX_PIN(0xff, 174),
-	MX31_PIN_PC_VS1		= IOMUX_PIN(0xff, 175),
-	MX31_PIN_PC_PWRON	= IOMUX_PIN(0xff, 176),
-	MX31_PIN_PC_READY	= IOMUX_PIN(0xff, 177),
-	MX31_PIN_PC_WAIT_B	= IOMUX_PIN(0xff, 178),
-	MX31_PIN_PC_CD2_B	= IOMUX_PIN(0xff, 179),
-	MX31_PIN_PC_CD1_B	= IOMUX_PIN(0xff, 180),
-	MX31_PIN_D0		= IOMUX_PIN(0xff, 181),
-	MX31_PIN_D1		= IOMUX_PIN(0xff, 182),
-	MX31_PIN_D2		= IOMUX_PIN(0xff, 183),
-	MX31_PIN_D3		= IOMUX_PIN(0xff, 184),
-	MX31_PIN_D4		= IOMUX_PIN(0xff, 185),
-	MX31_PIN_D5		= IOMUX_PIN(0xff, 186),
-	MX31_PIN_D6		= IOMUX_PIN(0xff, 187),
-	MX31_PIN_D7		= IOMUX_PIN(0xff, 188),
-	MX31_PIN_D8		= IOMUX_PIN(0xff, 189),
-	MX31_PIN_D9		= IOMUX_PIN(0xff, 190),
-	MX31_PIN_D10		= IOMUX_PIN(0xff, 191),
-	MX31_PIN_D11		= IOMUX_PIN(0xff, 192),
-	MX31_PIN_D12		= IOMUX_PIN(0xff, 193),
-	MX31_PIN_D13		= IOMUX_PIN(0xff, 194),
-	MX31_PIN_D14		= IOMUX_PIN(0xff, 195),
-	MX31_PIN_D15		= IOMUX_PIN(0xff, 196),
-	MX31_PIN_NFRB		= IOMUX_PIN(16,   197),
-	MX31_PIN_NFCE_B		= IOMUX_PIN(15,   198),
-	MX31_PIN_NFWP_B		= IOMUX_PIN(14,   199),
-	MX31_PIN_NFCLE		= IOMUX_PIN(13,   200),
-	MX31_PIN_NFALE		= IOMUX_PIN(12,   201),
-	MX31_PIN_NFRE_B		= IOMUX_PIN(11,   202),
-	MX31_PIN_NFWE_B		= IOMUX_PIN(10,   203),
-	MX31_PIN_SDQS3		= IOMUX_PIN(0xff, 204),
-	MX31_PIN_SDQS2		= IOMUX_PIN(0xff, 205),
-	MX31_PIN_SDQS1		= IOMUX_PIN(0xff, 206),
-	MX31_PIN_SDQS0		= IOMUX_PIN(0xff, 207),
-	MX31_PIN_SDCLK_B	= IOMUX_PIN(0xff, 208),
-	MX31_PIN_SDCLK		= IOMUX_PIN(0xff, 209),
-	MX31_PIN_SDCKE1		= IOMUX_PIN(0xff, 210),
-	MX31_PIN_SDCKE0		= IOMUX_PIN(0xff, 211),
-	MX31_PIN_SDWE		= IOMUX_PIN(0xff, 212),
-	MX31_PIN_CAS		= IOMUX_PIN(0xff, 213),
-	MX31_PIN_RAS		= IOMUX_PIN(0xff, 214),
-	MX31_PIN_RW		= IOMUX_PIN(0xff, 215),
-	MX31_PIN_BCLK		= IOMUX_PIN(0xff, 216),
-	MX31_PIN_LBA		= IOMUX_PIN(0xff, 217),
-	MX31_PIN_ECB		= IOMUX_PIN(0xff, 218),
-	MX31_PIN_CS5		= IOMUX_PIN(0xff, 219),
-	MX31_PIN_CS4		= IOMUX_PIN(0xff, 220),
-	MX31_PIN_CS3		= IOMUX_PIN(0xff, 221),
-	MX31_PIN_CS2		= IOMUX_PIN(0xff, 222),
-	MX31_PIN_CS1		= IOMUX_PIN(0xff, 223),
-	MX31_PIN_CS0		= IOMUX_PIN(0xff, 224),
-	MX31_PIN_OE		= IOMUX_PIN(0xff, 225),
-	MX31_PIN_EB1		= IOMUX_PIN(0xff, 226),
-	MX31_PIN_EB0		= IOMUX_PIN(0xff, 227),
-	MX31_PIN_DQM3		= IOMUX_PIN(0xff, 228),
-	MX31_PIN_DQM2		= IOMUX_PIN(0xff, 229),
-	MX31_PIN_DQM1		= IOMUX_PIN(0xff, 230),
-	MX31_PIN_DQM0		= IOMUX_PIN(0xff, 231),
-	MX31_PIN_SD31		= IOMUX_PIN(0xff, 232),
-	MX31_PIN_SD30		= IOMUX_PIN(0xff, 233),
-	MX31_PIN_SD29		= IOMUX_PIN(0xff, 234),
-	MX31_PIN_SD28		= IOMUX_PIN(0xff, 235),
-	MX31_PIN_SD27		= IOMUX_PIN(0xff, 236),
-	MX31_PIN_SD26		= IOMUX_PIN(0xff, 237),
-	MX31_PIN_SD25		= IOMUX_PIN(0xff, 238),
-	MX31_PIN_SD24		= IOMUX_PIN(0xff, 239),
-	MX31_PIN_SD23		= IOMUX_PIN(0xff, 240),
-	MX31_PIN_SD22		= IOMUX_PIN(0xff, 241),
-	MX31_PIN_SD21		= IOMUX_PIN(0xff, 242),
-	MX31_PIN_SD20		= IOMUX_PIN(0xff, 243),
-	MX31_PIN_SD19		= IOMUX_PIN(0xff, 244),
-	MX31_PIN_SD18		= IOMUX_PIN(0xff, 245),
-	MX31_PIN_SD17		= IOMUX_PIN(0xff, 246),
-	MX31_PIN_SD16		= IOMUX_PIN(0xff, 247),
-	MX31_PIN_SD15		= IOMUX_PIN(0xff, 248),
-	MX31_PIN_SD14		= IOMUX_PIN(0xff, 249),
-	MX31_PIN_SD13		= IOMUX_PIN(0xff, 250),
-	MX31_PIN_SD12		= IOMUX_PIN(0xff, 251),
-	MX31_PIN_SD11		= IOMUX_PIN(0xff, 252),
-	MX31_PIN_SD10		= IOMUX_PIN(0xff, 253),
-	MX31_PIN_SD9		= IOMUX_PIN(0xff, 254),
-	MX31_PIN_SD8		= IOMUX_PIN(0xff, 255),
-	MX31_PIN_SD7		= IOMUX_PIN(0xff, 256),
-	MX31_PIN_SD6		= IOMUX_PIN(0xff, 257),
-	MX31_PIN_SD5		= IOMUX_PIN(0xff, 258),
-	MX31_PIN_SD4		= IOMUX_PIN(0xff, 259),
-	MX31_PIN_SD3		= IOMUX_PIN(0xff, 260),
-	MX31_PIN_SD2		= IOMUX_PIN(0xff, 261),
-	MX31_PIN_SD1		= IOMUX_PIN(0xff, 262),
-	MX31_PIN_SD0		= IOMUX_PIN(0xff, 263),
-	MX31_PIN_SDBA0		= IOMUX_PIN(0xff, 264),
-	MX31_PIN_SDBA1		= IOMUX_PIN(0xff, 265),
-	MX31_PIN_A25		= IOMUX_PIN(0xff, 266),
-	MX31_PIN_A24		= IOMUX_PIN(0xff, 267),
-	MX31_PIN_A23		= IOMUX_PIN(0xff, 268),
-	MX31_PIN_A22		= IOMUX_PIN(0xff, 269),
-	MX31_PIN_A21		= IOMUX_PIN(0xff, 270),
-	MX31_PIN_A20		= IOMUX_PIN(0xff, 271),
-	MX31_PIN_A19		= IOMUX_PIN(0xff, 272),
-	MX31_PIN_A18		= IOMUX_PIN(0xff, 273),
-	MX31_PIN_A17		= IOMUX_PIN(0xff, 274),
-	MX31_PIN_A16		= IOMUX_PIN(0xff, 275),
-	MX31_PIN_A14		= IOMUX_PIN(0xff, 276),
-	MX31_PIN_A15		= IOMUX_PIN(0xff, 277),
-	MX31_PIN_A13		= IOMUX_PIN(0xff, 278),
-	MX31_PIN_A12		= IOMUX_PIN(0xff, 279),
-	MX31_PIN_A11		= IOMUX_PIN(0xff, 280),
-	MX31_PIN_MA10		= IOMUX_PIN(0xff, 281),
-	MX31_PIN_A10		= IOMUX_PIN(0xff, 282),
-	MX31_PIN_A9		= IOMUX_PIN(0xff, 283),
-	MX31_PIN_A8		= IOMUX_PIN(0xff, 284),
-	MX31_PIN_A7		= IOMUX_PIN(0xff, 285),
-	MX31_PIN_A6		= IOMUX_PIN(0xff, 286),
-	MX31_PIN_A5		= IOMUX_PIN(0xff, 287),
-	MX31_PIN_A4		= IOMUX_PIN(0xff, 288),
-	MX31_PIN_A3		= IOMUX_PIN(0xff, 289),
-	MX31_PIN_A2		= IOMUX_PIN(0xff, 290),
-	MX31_PIN_A1		= IOMUX_PIN(0xff, 291),
-	MX31_PIN_A0		= IOMUX_PIN(0xff, 292),
-	MX31_PIN_VPG1		= IOMUX_PIN(0xff, 293),
-	MX31_PIN_VPG0		= IOMUX_PIN(0xff, 294),
-	MX31_PIN_DVFS1		= IOMUX_PIN(0xff, 295),
-	MX31_PIN_DVFS0		= IOMUX_PIN(0xff, 296),
-	MX31_PIN_VSTBY		= IOMUX_PIN(0xff, 297),
-	MX31_PIN_POWER_FAIL	= IOMUX_PIN(0xff, 298),
-	MX31_PIN_CKIL		= IOMUX_PIN(0xff, 299),
-	MX31_PIN_BOOT_MODE4	= IOMUX_PIN(0xff, 300),
-	MX31_PIN_BOOT_MODE3	= IOMUX_PIN(0xff, 301),
-	MX31_PIN_BOOT_MODE2	= IOMUX_PIN(0xff, 302),
-	MX31_PIN_BOOT_MODE1	= IOMUX_PIN(0xff, 303),
-	MX31_PIN_BOOT_MODE0	= IOMUX_PIN(0xff, 304),
-	MX31_PIN_CLKO		= IOMUX_PIN(0xff, 305),
-	MX31_PIN_POR_B		= IOMUX_PIN(0xff, 306),
-	MX31_PIN_RESET_IN_B	= IOMUX_PIN(0xff, 307),
-	MX31_PIN_CKIH		= IOMUX_PIN(0xff, 308),
-	MX31_PIN_SIMPD0		= IOMUX_PIN(35,   309),
-	MX31_PIN_SRX0		= IOMUX_PIN(34,   310),
-	MX31_PIN_STX0		= IOMUX_PIN(33,   311),
-	MX31_PIN_SVEN0		= IOMUX_PIN(32,   312),
-	MX31_PIN_SRST0		= IOMUX_PIN(67,   313),
-	MX31_PIN_SCLK0		= IOMUX_PIN(66,   314),
-	MX31_PIN_GPIO3_1	= IOMUX_PIN(65,   315),
-	MX31_PIN_GPIO3_0	= IOMUX_PIN(64,   316),
-	MX31_PIN_GPIO1_6	= IOMUX_PIN( 6,   317),
-	MX31_PIN_GPIO1_5	= IOMUX_PIN( 5,   318),
-	MX31_PIN_GPIO1_4	= IOMUX_PIN( 4,   319),
-	MX31_PIN_GPIO1_3	= IOMUX_PIN( 3,   320),
-	MX31_PIN_GPIO1_2	= IOMUX_PIN( 2,   321),
-	MX31_PIN_GPIO1_1	= IOMUX_PIN( 1,   322),
-	MX31_PIN_GPIO1_0	= IOMUX_PIN( 0,   323),
-	MX31_PIN_PWMO		= IOMUX_PIN( 9,   324),
-	MX31_PIN_WATCHDOG_RST	= IOMUX_PIN(0xff, 325),
-	MX31_PIN_COMPARE	= IOMUX_PIN( 8,   326),
-	MX31_PIN_CAPTURE	= IOMUX_PIN( 7,   327),
-};
-
-/*
- * Convenience values for use with mxc_iomux_mode()
- *
- * Format here is MX31_PIN_(pin name)__(function)
- */
-#define MX31_PIN_CSPI3_MOSI__RXD3	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_MISO__TXD3	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins, u32);
-
-#endif
-
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
deleted file mode 100644
index f416130718cf..000000000000
--- a/include/asm-arm/arch-mxc/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IRQS_H__
-#define __ASM_ARCH_MXC_IRQS_H__
-
-#include <asm/hardware.h>
-
-#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h
deleted file mode 100644
index 059f83023a10..000000000000
--- a/include/asm-arm/arch-mxc/memory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#include <asm/hardware.h>
-
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a)	__virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a)	__phys_to_virt(a)
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mx27.h b/include/asm-arm/arch-mxc/mx27.h
deleted file mode 100644
index 212ecc246626..000000000000
--- a/include/asm-arm/arch-mxc/mx27.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/* IRAM */
-#define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
-
-/* Register offests */
-#define AIPI_BASE_ADDR          0x10000000
-#define AIPI_BASE_ADDR_VIRT     0xF4000000
-#define AIPI_SIZE               SZ_1M
-
-#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
-
-#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
-#define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
-#define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
-#define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
-#define UART5_BASE_ADDR         (AIPI_BASE_ADDR + 0x1B000)
-#define UART6_BASE_ADDR         (AIPI_BASE_ADDR + 0x1C000)
-#define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
-#define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
-#define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
-
-#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
-#define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
-#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
-/* for mx27*/
-#define OTG_BASE_ADDR           USBOTG_BASE_ADDR
-#define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_BASE_ADDR          (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
-#define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
-
-#define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
-#define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
-#define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
-#define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
-#define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
-
-#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
-
-/* ROMP and AVIC */
-#define ROMP_BASE_ADDR          0x10041000
-
-#define AVIC_BASE_ADDR          0x10040000
-
-#define SAHB1_BASE_ADDR         0x80000000
-#define SAHB1_BASE_ADDR_VIRT    0xF4100000
-#define SAHB1_SIZE              SZ_1M
-
-#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
-#define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
-
-/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR        0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_1M
-
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
-
-/* Memory regions and CS */
-#define SDRAM_BASE_ADDR		0xA0000000
-#define CSD1_BASE_ADDR		0xB0000000
-
-#define CS0_BASE_ADDR           0xC0000000
-#define CS1_BASE_ADDR           0xC8000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD2000000
-#define CS4_BASE_ADDR           0xD4000000
-#define CS5_BASE_ADDR           0xD6000000
-#define PCMCIA_MEM_BASE_ADDR    0xDC000000
-
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
-		AIPI_IO_ADDRESS(x) : \
-	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
-		SAHB1_IO_ADDRESS(x) : \
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
-		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x)  \
-	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x)  \
-	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/* fixed interrput numbers */
-#define MXC_INT_CCM		63
-#define MXC_INT_IIM		62
-#define MXC_INT_LCDC		61
-#define MXC_INT_SLCDC		60
-#define MXC_INT_SAHARA		59
-#define MXC_INT_SCC_SCM		58
-#define MXC_INT_SCC_SMN		57
-#define MXC_INT_USB3		56
-#define MXC_INT_USB2		55
-#define MXC_INT_USB1		54
-#define MXC_INT_VPU		53
-#define MXC_INT_EMMAPP		52
-#define MXC_INT_EMMAPRP		51
-#define MXC_INT_FEC		50
-#define MXC_INT_UART5		49
-#define MXC_INT_UART6		48
-#define MXC_INT_DMACH15		47
-#define MXC_INT_DMACH14		46
-#define MXC_INT_DMACH13		45
-#define MXC_INT_DMACH12		44
-#define MXC_INT_DMACH11		43
-#define MXC_INT_DMACH10		42
-#define MXC_INT_DMACH9		41
-#define MXC_INT_DMACH8		40
-#define MXC_INT_DMACH7		39
-#define MXC_INT_DMACH6		38
-#define MXC_INT_DMACH5		37
-#define MXC_INT_DMACH4		36
-#define MXC_INT_DMACH3		35
-#define MXC_INT_DMACH2		34
-#define MXC_INT_DMACH1		33
-#define MXC_INT_DMACH0		32
-#define MXC_INT_CSI		31
-#define MXC_INT_ATA		30
-#define MXC_INT_NANDFC		29
-#define MXC_INT_PCMCIA		28
-#define MXC_INT_WDOG		27
-#define MXC_INT_GPT1		26
-#define MXC_INT_GPT2		25
-#define MXC_INT_GPT3		24
-#define MXC_INT_GPT		INT_GPT1
-#define MXC_INT_PWM		23
-#define MXC_INT_RTC		22
-#define MXC_INT_KPP		21
-#define MXC_INT_UART1		20
-#define MXC_INT_UART2		19
-#define MXC_INT_UART3		18
-#define MXC_INT_UART4		17
-#define MXC_INT_CSPI1		16
-#define MXC_INT_CSPI2		15
-#define MXC_INT_SSI1		14
-#define MXC_INT_SSI2		13
-#define MXC_INT_I2C		12
-#define MXC_INT_SDHC1		11
-#define MXC_INT_SDHC2		10
-#define MXC_INT_SDHC3		9
-#define MXC_INT_GPIO		8
-#define MXC_INT_SDHC		7
-#define MXC_INT_CSPI3		6
-#define MXC_INT_RTIC		5
-#define MXC_INT_GPT4		4
-#define MXC_INT_GPT5		3
-#define MXC_INT_GPT6		2
-#define MXC_INT_I2C2		1
-
-/* fixed DMA request numbers */
-#define DMA_REQ_NFC             37
-#define DMA_REQ_SDHC3           36
-#define DMA_REQ_UART6_RX        35
-#define DMA_REQ_UART6_TX        34
-#define DMA_REQ_UART5_RX        33
-#define DMA_REQ_UART5_TX        32
-#define DMA_REQ_CSI_RX          31
-#define DMA_REQ_CSI_STAT        30
-#define DMA_REQ_ATA_RCV         29
-#define DMA_REQ_ATA_TX          28
-#define DMA_REQ_UART1_TX        27
-#define DMA_REQ_UART1_RX        26
-#define DMA_REQ_UART2_TX        25
-#define DMA_REQ_UART2_RX        24
-#define DMA_REQ_UART3_TX        23
-#define DMA_REQ_UART3_RX        22
-#define DMA_REQ_UART4_TX        21
-#define DMA_REQ_UART4_RX        20
-#define DMA_REQ_CSPI1_TX        19
-#define DMA_REQ_CSPI1_RX        18
-#define DMA_REQ_CSPI2_TX        17
-#define DMA_REQ_CSPI2_RX        16
-#define DMA_REQ_SSI1_TX1        15
-#define DMA_REQ_SSI1_RX1        14
-#define DMA_REQ_SSI1_TX0        13
-#define DMA_REQ_SSI1_RX0        12
-#define DMA_REQ_SSI2_TX1        11
-#define DMA_REQ_SSI2_RX1        10
-#define DMA_REQ_SSI2_TX0        9
-#define DMA_REQ_SSI2_RX0        8
-#define DMA_REQ_SDHC1           7
-#define DMA_REQ_SDHC2           6
-#define DMA_REQ_MSHC            4
-#define DMA_REQ_EXT             3
-#define DMA_REQ_CSPI3_TX        2
-#define DMA_REQ_CSPI3_RX        1
-
-/* silicon revisions specific to i.MX27 */
-#define CHIP_REV_1_0		0x00
-#define CHIP_REV_2_0		0x01
-
-#ifndef __ASSEMBLY__
-extern int mx27_revision(void);
-#endif
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
-/* Mandatory defines used globally */
-
-/* this is an i.MX27 CPU */
-#define cpu_is_mx27()		(1)
-
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(192 + 16)
-
-/* OS clock tick rate */
-#define CLOCK_TICK_RATE         13300000
-
-/* Start of RAM */
-#define PHYS_OFFSET		SDRAM_BASE_ADDR
-
-/* max interrupt lines count */
-#define NR_IRQS			256
-
-/* count of internal interrupt sources */
-#define MXC_MAX_INT_LINES	64
-
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h
deleted file mode 100644
index a7373e4a56cb..000000000000
--- a/include/asm-arm/arch-mxc/mx31.h
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/*!
- * defines the hardware clock tick rate
- */
-#define CLOCK_TICK_RATE		16625000
-
-/*
- * MX31 memory map:
- *
- * Virt		Phys		Size	What
- * ---------------------------------------------------------------------------
- * F8000000	1FFC0000	16K	IRAM
- * F9000000	30000000	256M	L2CC
- * FC000000	43F00000	1M	AIPS 1
- * FC100000	50000000	1M	SPBA
- * FC200000	53F00000	1M	AIPS 2
- * FC500000	60000000	128M	ROMPATCH
- * FC400000	68000000	128M	AVIC
- *         	70000000	256M	IPU (MAX M2)
- *         	80000000	256M	CSD0 SDRAM/DDR
- *         	90000000	256M	CSD1 SDRAM/DDR
- *         	A0000000	128M	CS0 Flash
- *         	A8000000	128M	CS1 Flash
- *         	B0000000	32M	CS2
- *         	B2000000	32M	CS3
- * F4000000	B4000000	32M	CS4
- *         	B6000000	32M	CS5
- * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
- *         	C0000000	64M	PCMCIA/CF
- */
-
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
-/*
- * IRAM
- */
-#define IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
-#define IRAM_BASE_ADDR_VIRT	0xF8000000
-#define IRAM_SIZE		SZ_16K
-
-/*
- * L2CC
- */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_BASE_ADDR_VIRT	0xF9000000
-#define L2CC_SIZE		SZ_1M
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
-
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
-#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
-#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
-#define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
-#define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
-
-/*
- * SPBA global module enabled #0
- */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
-
-#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
-#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
-#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
-#define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define MSHC2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
-
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
-#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
-#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
-#define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
-#define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
-#define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
-
-/*
- * ROMP and AVIC
- */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
-
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
-
-#define NFC_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x0000)
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
-
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
-	((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
-	((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
-	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
-	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
-	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
-	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
-	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
-	0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-
-#define IRAM_IO_ADDRESS(x)  \
-	(((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
-
-#define L2CC_IO_ADDRESS(x)  \
-	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x)  \
-	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x)  \
-	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x)  \
-	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x)  \
-	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)  \
-	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */
-#define PHYS_OFFSET             CSD0_BASE_ADDR
-
-/*
- * Interrupt numbers
- */
-#define MXC_INT_PEN_ADS7843	0
-#define MXC_INT_RESV1		1
-#define MXC_INT_CS8900A		2
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
-#define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_RTIC		6
-#define MXC_INT_FIRI		7
-#define MXC_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC1	9
-#define MXC_INT_I2C		10
-#define MXC_INT_SSI2		11
-#define MXC_INT_SSI1		12
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
-#define MXC_INT_MBX		16
-#define MXC_INT_CSPI3		17
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
-#define MXC_INT_SIM2		20
-#define MXC_INT_SIM1		21
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_RESV30		30
-#define MXC_INT_RESV31		31
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
-#define MXC_INT_USB1		35
-#define MXC_INT_USB2		36
-#define MXC_INT_USB3		37
-#define MXC_INT_USB4		38
-#define MXC_INT_MSHC1		39
-#define MXC_INT_MSHC2		40
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_RESV43		43
-#define MXC_INT_RESV44		44
-#define MXC_INT_UART1		45
-#define MXC_INT_UART4		46
-#define MXC_INT_UART5		47
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
-#define MXC_INT_CCM		53
-#define MXC_INT_PCMCIA		54
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_RESV57		57
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
-
-#define MXC_MAX_INT_LINES	64
-
-#define MXC_GPIO_INT_BASE	MXC_MAX_INT_LINES
-#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
-#define MXC_MAX_VIRTUAL_INTS	16
-
-#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
-
-/*!
- * Number of GPIO port as defined in the IC Spec
- */
-#define GPIO_PORT_NUM		3
-/*!
- * Number of GPIO pins per port
- */
-#define GPIO_NUM_PIN		32
-
-#define PROD_SIGNATURE		0x1	/* For MX31 */
-
-/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
-
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
-/* Mandatory defines used globally */
-
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-/* this is a i.MX31 CPU */
-#define cpu_is_mx31()		(1)
-
-extern unsigned int system_rev;
-
-static inline int mx31_revision(void)
-{
-	return system_rev;
-}
-#endif
-
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h
deleted file mode 100644
index 332eda4dbd3b..000000000000
--- a/include/asm-arm/arch-mxc/mxc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_H__
-#define __ASM_ARCH_MXC_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/* clean up all things that are not used */
-#ifndef CONFIG_ARCH_MX3
-# define cpu_is_mx31() (0)
-#endif
-
-#ifndef CONFIG_MACH_MX27
-# define cpu_is_mx27() (0)
-#endif
-
-#endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h
deleted file mode 100644
index 6cb11f4f1a06..000000000000
--- a/include/asm-arm/arch-mxc/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_ARCH_IMX
-#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT		TIM1_INT
-
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_CLK_TIN		(3<<1)
-#define TCTL_CLK_32		(4<<1)
-
-#define MXC_TCTL   0x00
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_IMX */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT1
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1		(1<<1)
-#define TCTL_CLK_PCLK1_4	(2<<1)
-#define TCTL_IRQEN		(1<<4)
-#define TCTL_FRR		(1<<8)
-#define MXC_TPRER  0x04
-#define MXC_TCMP   0x08
-#define MXC_TCR    0x0c
-#define MXC_TCN    0x10
-#define MXC_TSTAT  0x14
-#define TSTAT_CAPT		(1<<1)
-#define TSTAT_COMP		(1<<0)
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
-	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
-				TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT		MXC_INT_GPT
-
-#define MXC_TCTL   0x00
-#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG		(1<<6)
-#define TCTL_FRR		(1<<9)
-#define TCTL_WAITEN		(1<<3)
-
-#define MXC_TPRER  0x04
-#define MXC_TSTAT  0x08
-#define TSTAT_OF1		(1<<0)
-#define TSTAT_OF2		(1<<1)
-#define TSTAT_OF3		(1<<2)
-#define TSTAT_IF1		(1<<3)
-#define TSTAT_IF2		(1<<4)
-#define TSTAT_ROV		(1<<5)
-#define MXC_IR     0x0c
-#define MXC_TCMP   0x10
-#define MXC_TCMP2  0x14
-#define MXC_TCMP3  0x18
-#define MXC_TCR    0x1c
-#define MXC_TCN    0x24
-
-static inline void gpt_irq_disable(void)
-{
-	__raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
-	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
-	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR		(1<<15)
-#define TCTL_CC			(1<<10)
-#define TCTL_OM			(1<<9)
-#define TCTL_CAP_RIS		(1<<6)
-#define TCTL_CAP_FAL		(2<<6)
-#define TCTL_CAP_RIS_FAL	(3<<6)
-#define TCTL_CAP_ENA		(1<<5)
-#define TCTL_TEN		(1<<0)
-
-#endif
diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h
deleted file mode 100644
index bbfc37465fc5..000000000000
--- a/include/asm-arm/arch-mxc/system.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h
deleted file mode 100644
index 59019fa58f82..000000000000
--- a/include/asm-arm/arch-mxc/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-#include <asm/hardware.h>	/* for CLOCK_TICK_RATE */
-
-#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h
deleted file mode 100644
index 42cc0cb3fefd..000000000000
--- a/include/asm-arm/arch-mxc/uncompress.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  include/asm-arm/arch-mxc/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/hardware.h>
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
-	static unsigned long serial_port = 0;
-
-	if (unlikely(serial_port == 0)) {
-		do {
-			serial_port = UART1_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			serial_port = UART2_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			return;
-		} while (0);
-	}
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = ch;
-}
-
-#define flush() do { } while (0)
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h
deleted file mode 100644
index 62d97623412f..000000000000
--- a/include/asm-arm/arch-mxc/vmalloc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  Copyright (C) 2000 Russell King.
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_VMALLOC_H__
-#define __ASM_ARCH_MXC_VMALLOC_H__
-
-/* vmalloc ending address */
-#define VMALLOC_END       0xF4000000
-
-#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S
deleted file mode 100644
index a940d0e80cb2..000000000000
--- a/include/asm-arm/arch-netx/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/include/asm-arm/arch-netx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00100000		@ physical
-		movne	\rx, #io_p2v(0x00100000)	@ virtual
-		orr	\rx, \rx, #0x00000a00
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h
deleted file mode 100644
index 4eda5feed81c..000000000000
--- a/include/asm-arm/arch-netx/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/dma.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS ~0
diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S
deleted file mode 100644
index 83ad188a0847..000000000000
--- a/include/asm-arm/arch-netx/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-netx/entry-macro.S
- *
- * Low-level IRQ helper macros for Hilscher netX based platforms
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/hardware.h>
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #io_p2v(0x00100000)
-		add	\base, \base, #0x000ff000
-
-		ldr	\irqstat, [\base, #0]
-		clz	\irqnr, \irqstat
-		rsb     \irqnr, \irqnr, #31
-		cmp	\irqstat, #0
-		.endm
-
diff --git a/include/asm-arm/arch-netx/eth.h b/include/asm-arm/arch-netx/eth.h
deleted file mode 100644
index 643c90ef8b72..000000000000
--- a/include/asm-arm/arch-netx/eth.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-netx/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
-
-struct netxeth_platform_data {
-	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
-};
-
-#endif
diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h
deleted file mode 100644
index 7786c45455cd..000000000000
--- a/include/asm-arm/arch-netx/hardware.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-netx/hardware.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define NETX_IO_PHYS	0x00100000
-#define NETX_IO_VIRT	0xe0000000
-#define NETX_IO_SIZE	0x00100000
-
-#define SRAM_INTERNAL_PHYS_0 0x00000
-#define SRAM_INTERNAL_PHYS_1 0x08000
-#define SRAM_INTERNAL_PHYS_2 0x10000
-#define SRAM_INTERNAL_PHYS_3 0x18000
-#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
-
-#define XPEC_MEM_SIZE 0x4000
-#define XMAC_MEM_SIZE 0x1000
-#define SRAM_MEM_SIZE 0x8000
-
-#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
-#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
-
-#endif
diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h
deleted file mode 100644
index a7a53f80165d..000000000000
--- a/include/asm-arm/arch-netx/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/io.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)         ((void __iomem *)(a))
-#define __mem_pci(a)            (a)
-
-#endif
diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h
deleted file mode 100644
index a487dc6e2661..000000000000
--- a/include/asm-arm/arch-netx/irqs.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-arm/arch-netx/irqs.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define NETX_IRQ_VIC_START   0
-#define NETX_IRQ_SOFTINT     0
-#define NETX_IRQ_TIMER0      1
-#define NETX_IRQ_TIMER1      2
-#define NETX_IRQ_TIMER2      3
-#define NETX_IRQ_SYSTIME_NS  4
-#define NETX_IRQ_SYSTIME_S   5
-#define NETX_IRQ_GPIO_15     6
-#define NETX_IRQ_WATCHDOG    7
-#define NETX_IRQ_UART0       8
-#define NETX_IRQ_UART1       9
-#define NETX_IRQ_UART2      10
-#define NETX_IRQ_USB        11
-#define NETX_IRQ_SPI        12
-#define NETX_IRQ_I2C        13
-#define NETX_IRQ_LCD        14
-#define NETX_IRQ_HIF        15
-#define NETX_IRQ_GPIO_0_14  16
-#define NETX_IRQ_XPEC0      17
-#define NETX_IRQ_XPEC1      18
-#define NETX_IRQ_XPEC2      19
-#define NETX_IRQ_XPEC3      20
-#define NETX_IRQ_XPEC(no)   (17 + (no))
-#define NETX_IRQ_MSYNC0     21
-#define NETX_IRQ_MSYNC1     22
-#define NETX_IRQ_MSYNC2     23
-#define NETX_IRQ_MSYNC3     24
-#define NETX_IRQ_IRQ_PHY    25
-#define NETX_IRQ_ISO_AREA   26
-/* int 27 is reserved */
-/* int 28 is reserved */
-#define NETX_IRQ_TIMER3     29
-#define NETX_IRQ_TIMER4     30
-/* int 31 is reserved */
-
-#define NETX_IRQS 32
-
-/* for multiplexed irqs on gpio 0..14 */
-#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
-#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
-
-/* Host interface interrupts */
-#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
-#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
-#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
-#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
-#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
-#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
-#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
-
-#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h
deleted file mode 100644
index 6d8d2df3e99d..000000000000
--- a/include/asm-arm/arch-netx/memory.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET UL(0x80000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)         __virt_to_phys(x)
-#define __bus_to_virt(x)         __phys_to_virt(x)
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h
deleted file mode 100644
index fc9aa21f360c..000000000000
--- a/include/asm-arm/arch-netx/netx-regs.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * include/asm-arm/arch-netx/netx-regs.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_NETX_REGS_H
-#define __ASM_ARCH_NETX_REGS_H
-
-/* offsets relative to the beginning of the io space */
-#define NETX_OFS_SYSTEM  0x00000
-#define NETX_OFS_MEMCR   0x00100
-#define NETX_OFS_DPMAS   0x03000
-#define NETX_OFS_GPIO    0x00800
-#define NETX_OFS_PIO     0x00900
-#define NETX_OFS_UART0   0x00a00
-#define NETX_OFS_UART1   0x00a40
-#define NETX_OFS_UART2   0x00a80
-#define NETX_OF_MIIMU    0x00b00
-#define NETX_OFS_SPI     0x00c00
-#define NETX_OFS_I2C     0x00d00
-#define NETX_OFS_SYSTIME 0x01100
-#define NETX_OFS_RTC     0x01200
-#define NETX_OFS_EXTBUS  0x03600
-#define NETX_OFS_LCD     0x04000
-#define NETX_OFS_USB     0x20000
-#define NETX_OFS_XMAC0   0x60000
-#define NETX_OFS_XMAC1   0x61000
-#define NETX_OFS_XMAC2   0x62000
-#define NETX_OFS_XMAC3   0x63000
-#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
-#define NETX_OFS_PFIFO   0x64000
-#define NETX_OFS_XPEC0   0x70000
-#define NETX_OFS_XPEC1   0x74000
-#define NETX_OFS_XPEC2   0x78000
-#define NETX_OFS_XPEC3   0x7c000
-#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
-#define NETX_OFS_VIC     0xff000
-
-/* physical addresses */
-#define NETX_PA_SYSTEM   (NETX_IO_PHYS + NETX_OFS_SYSTEM)
-#define NETX_PA_MEMCR    (NETX_IO_PHYS + NETX_OFS_MEMCR)
-#define NETX_PA_DPMAS    (NETX_IO_PHYS + NETX_OFS_DPMAS)
-#define NETX_PA_GPIO     (NETX_IO_PHYS + NETX_OFS_GPIO)
-#define NETX_PA_PIO      (NETX_IO_PHYS + NETX_OFS_PIO)
-#define NETX_PA_UART0    (NETX_IO_PHYS + NETX_OFS_UART0)
-#define NETX_PA_UART1    (NETX_IO_PHYS + NETX_OFS_UART1)
-#define NETX_PA_UART2    (NETX_IO_PHYS + NETX_OFS_UART2)
-#define NETX_PA_MIIMU    (NETX_IO_PHYS + NETX_OF_MIIMU)
-#define NETX_PA_SPI      (NETX_IO_PHYS + NETX_OFS_SPI)
-#define NETX_PA_I2C      (NETX_IO_PHYS + NETX_OFS_I2C)
-#define NETX_PA_SYSTIME  (NETX_IO_PHYS + NETX_OFS_SYSTIME)
-#define NETX_PA_RTC      (NETX_IO_PHYS + NETX_OFS_RTC)
-#define NETX_PA_EXTBUS   (NETX_IO_PHYS + NETX_OFS_EXTBUS)
-#define NETX_PA_LCD      (NETX_IO_PHYS + NETX_OFS_LCD)
-#define NETX_PA_USB      (NETX_IO_PHYS + NETX_OFS_USB)
-#define NETX_PA_XMAC0    (NETX_IO_PHYS + NETX_OFS_XMAC0)
-#define NETX_PA_XMAC1    (NETX_IO_PHYS + NETX_OFS_XMAC1)
-#define NETX_PA_XMAC2    (NETX_IO_PHYS + NETX_OFS_XMAC2)
-#define NETX_PA_XMAC3    (NETX_IO_PHYS + NETX_OFS_XMAC3)
-#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
-#define NETX_PA_PFIFO    (NETX_IO_PHYS + NETX_OFS_PFIFO)
-#define NETX_PA_XPEC0    (NETX_IO_PHYS + NETX_OFS_XPEC0)
-#define NETX_PA_XPEC1    (NETX_IO_PHYS + NETX_OFS_XPEC1)
-#define NETX_PA_XPEC2    (NETX_IO_PHYS + NETX_OFS_XPEC2)
-#define NETX_PA_XPEC3    (NETX_IO_PHYS + NETX_OFS_XPEC3)
-#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
-#define NETX_PA_VIC      (NETX_IO_PHYS + NETX_OFS_VIC)
-
-/* virual addresses */
-#define NETX_VA_SYSTEM   (NETX_IO_VIRT + NETX_OFS_SYSTEM)
-#define NETX_VA_MEMCR    (NETX_IO_VIRT + NETX_OFS_MEMCR)
-#define NETX_VA_DPMAS    (NETX_IO_VIRT + NETX_OFS_DPMAS)
-#define NETX_VA_GPIO     (NETX_IO_VIRT + NETX_OFS_GPIO)
-#define NETX_VA_PIO      (NETX_IO_VIRT + NETX_OFS_PIO)
-#define NETX_VA_UART0    (NETX_IO_VIRT + NETX_OFS_UART0)
-#define NETX_VA_UART1    (NETX_IO_VIRT + NETX_OFS_UART1)
-#define NETX_VA_UART2    (NETX_IO_VIRT + NETX_OFS_UART2)
-#define NETX_VA_MIIMU    (NETX_IO_VIRT + NETX_OF_MIIMU)
-#define NETX_VA_SPI      (NETX_IO_VIRT + NETX_OFS_SPI)
-#define NETX_VA_I2C      (NETX_IO_VIRT + NETX_OFS_I2C)
-#define NETX_VA_SYSTIME  (NETX_IO_VIRT + NETX_OFS_SYSTIME)
-#define NETX_VA_RTC      (NETX_IO_VIRT + NETX_OFS_RTC)
-#define NETX_VA_EXTBUS   (NETX_IO_VIRT + NETX_OFS_EXTBUS)
-#define NETX_VA_LCD      (NETX_IO_VIRT + NETX_OFS_LCD)
-#define NETX_VA_USB      (NETX_IO_VIRT + NETX_OFS_USB)
-#define NETX_VA_XMAC0    (NETX_IO_VIRT + NETX_OFS_XMAC0)
-#define NETX_VA_XMAC1    (NETX_IO_VIRT + NETX_OFS_XMAC1)
-#define NETX_VA_XMAC2    (NETX_IO_VIRT + NETX_OFS_XMAC2)
-#define NETX_VA_XMAC3    (NETX_IO_VIRT + NETX_OFS_XMAC3)
-#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
-#define NETX_VA_PFIFO    (NETX_IO_VIRT + NETX_OFS_PFIFO)
-#define NETX_VA_XPEC0    (NETX_IO_VIRT + NETX_OFS_XPEC0)
-#define NETX_VA_XPEC1    (NETX_IO_VIRT + NETX_OFS_XPEC1)
-#define NETX_VA_XPEC2    (NETX_IO_VIRT + NETX_OFS_XPEC2)
-#define NETX_VA_XPEC3    (NETX_IO_VIRT + NETX_OFS_XPEC3)
-#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
-#define NETX_VA_VIC      (NETX_IO_VIRT + NETX_OFS_VIC)
-
-/*********************************
- * System functions              *
- *********************************/
-
-/* Registers */
-#define NETX_SYSTEM_REG(ofs)            __io(NETX_VA_SYSTEM + (ofs))
-#define NETX_SYSTEM_BOO_SR          NETX_SYSTEM_REG(0x00)
-#define NETX_SYSTEM_IOC_CR          NETX_SYSTEM_REG(0x04)
-#define NETX_SYSTEM_IOC_MR          NETX_SYSTEM_REG(0x08)
-
-/* FIXME: Docs are not consistent */
-/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08) */
-#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c)
-
-#define NETX_SYSTEM_PHY_CONTROL     NETX_SYSTEM_REG(0x10)
-#define NETX_SYSTEM_REV             NETX_SYSTEM_REG(0x34)
-#define NETX_SYSTEM_IOC_ACCESS_KEY  NETX_SYSTEM_REG(0x70)
-#define NETX_SYSTEM_WDG_TR          NETX_SYSTEM_REG(0x200)
-#define NETX_SYSTEM_WDG_CTR         NETX_SYSTEM_REG(0x204)
-#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
-#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
-
-/* Bits */
-#define NETX_SYSTEM_RES_CR_RSTIN         (1<<0)
-#define NETX_SYSTEM_RES_CR_WDG_RES       (1<<1)
-#define NETX_SYSTEM_RES_CR_HOST_RES      (1<<2)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES     (1<<3)
-#define NETX_SYSTEM_RES_CR_XPEC0_RES     (1<<4)
-#define NETX_SYSTEM_RES_CR_XPEC1_RES     (1<<5)
-#define NETX_SYSTEM_RES_CR_XPEC2_RES     (1<<6)
-#define NETX_SYSTEM_RES_CR_XPEC3_RES     (1<<7)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG0    (1<<20)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG1    (1<<21)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG2    (1<<22)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG3    (1<<23)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN  (1<<24)
-#define NETX_SYSTEM_RES_CR_RSTOUT        (1<<25)
-#define NETX_SYSTEM_RES_CR_EN_RSTOUT     (1<<26)
-
-#define PHY_CONTROL_RESET            (1<<31)
-#define PHY_CONTROL_SIM_BYP          (1<<30)
-#define PHY_CONTROL_CLK_XLATIN       (1<<29)
-#define PHY_CONTROL_PHY1_EN          (1<<21)
-#define PHY_CONTROL_PHY1_NP_MSG_CODE
-#define PHY_CONTROL_PHY1_AUTOMDIX    (1<<17)
-#define PHY_CONTROL_PHY1_FIXMODE     (1<<16)
-#define PHY_CONTROL_PHY1_MODE(mode)  (((mode) & 0x7) << 13)
-#define PHY_CONTROL_PHY0_EN          (1<<12)
-#define PHY_CONTROL_PHY0_NP_MSG_CODE
-#define PHY_CONTROL_PHY0_AUTOMDIX    (1<<8)
-#define PHY_CONTROL_PHY0_FIXMODE     (1<<7)
-#define PHY_CONTROL_PHY0_MODE(mode)  (((mode) & 0x7) << 4)
-#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
-
-#define PHY_MODE_10BASE_T_HALF      0
-#define PHY_MODE_10BASE_T_FULL      1
-#define PHY_MODE_100BASE_TX_FX_FULL 2
-#define PHY_MODE_100BASE_TX_FX_HALF 3
-#define PHY_MODE_100BASE_TX_HALF    4
-#define PHY_MODE_REPEATER           5
-#define PHY_MODE_POWER_DOWN         6
-#define PHY_MODE_ALL                7
-
-/* Bits */
-#define VECT_CNTL_ENABLE               (1 << 5)
-
-/*******************************
- * GPIO and timer module       *
- *******************************/
-
-/* Registers */
-#define NETX_GPIO_REG(ofs)                     __io(NETX_VA_GPIO + (ofs))
-#define NETX_GPIO_CFG(gpio)                NETX_GPIO_REG(0x0  + ((gpio)<<2))
-#define NETX_GPIO_THRESHOLD_CAPTURE(gpio)  NETX_GPIO_REG(0x40 + ((gpio)<<2))
-#define NETX_GPIO_COUNTER_CTRL(counter)    NETX_GPIO_REG(0x80 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_MAX(counter)     NETX_GPIO_REG(0x94 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
-#define NETX_GPIO_IRQ_ENABLE               NETX_GPIO_REG(0xbc)
-#define NETX_GPIO_IRQ_DISABLE              NETX_GPIO_REG(0xc0)
-#define NETX_GPIO_SYSTIME_NS_CMP           NETX_GPIO_REG(0xc4)
-#define NETX_GPIO_LINE                     NETX_GPIO_REG(0xc8)
-#define NETX_GPIO_IRQ                      NETX_GPIO_REG(0xd0)
-
-/* Bits */
-#define NETX_GPIO_CFG_IOCFG_GP_INPUT                 (0x0)
-#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT                (0x1)
-#define NETX_GPIO_CFG_IOCFG_GP_UART                  (0x2)
-#define NETX_GPIO_CFG_INV                            (1<<2)
-#define NETX_GPIO_CFG_MODE_INPUT_READ                (0<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL  (3<<3)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER0             (0<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER1             (1<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER2             (2<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER3             (3<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER4             (4<<5)
-#define NETX_GPIO_CFG_COUNT_REF_SYSTIME              (7<<5)
-
-#define NETX_GPIO_COUNTER_CTRL_RUN                   (1<<0)
-#define NETX_GPIO_COUNTER_CTRL_SYM                   (1<<1)
-#define NETX_GPIO_COUNTER_CTRL_ONCE                  (1<<2)
-#define NETX_GPIO_COUNTER_CTRL_IRQ_EN                (1<<3)
-#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT             (1<<4)
-#define NETX_GPIO_COUNTER_CTRL_RST_EN                (1<<5)
-#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT             (1<<6)
-#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
-
-#define GPIO_BIT(gpio)                     (1<<(gpio))
-#define COUNTER_BIT(counter)               ((1<<16)<<(counter))
-
-/*******************************
- * PIO                         *
- *******************************/
-
-/* Registers */
-#define NETX_PIO_REG(ofs)        __io(NETX_VA_PIO + (ofs))
-#define NETX_PIO_INPIO       NETX_PIO_REG(0x0)
-#define NETX_PIO_OUTPIO      NETX_PIO_REG(0x4)
-#define NETX_PIO_OEPIO       NETX_PIO_REG(0x8)
-
-/*******************************
- * MII Unit                    *
- *******************************/
-
-/* Registers */
-#define NETX_MIIMU           __io(NETX_VA_MIIMU)
-
-/* Bits */
-#define MIIMU_SNRDY        (1<<0)
-#define MIIMU_PREAMBLE     (1<<1)
-#define MIIMU_OPMODE_WRITE (1<<2)
-#define MIIMU_MDC_PERIOD   (1<<3)
-#define MIIMU_PHY_NRES     (1<<4)
-#define MIIMU_RTA          (1<<5)
-#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
-#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
-#define MIIMU_DATA(data)   (((data) & 0xffff) << 16)
-
-/*******************************
- * xmac / xpec                 *
- *******************************/
-
-/* XPEC register offsets relative to NETX_VA_XPEC(no) */
-#define NETX_XPEC_R0_OFS           0x00
-#define NETX_XPEC_R1_OFS           0x04
-#define NETX_XPEC_R2_OFS           0x08
-#define NETX_XPEC_R3_OFS           0x0c
-#define NETX_XPEC_R4_OFS           0x10
-#define NETX_XPEC_R5_OFS           0x14
-#define NETX_XPEC_R6_OFS           0x18
-#define NETX_XPEC_R7_OFS           0x1c
-#define NETX_XPEC_RANGE01_OFS      0x20
-#define NETX_XPEC_RANGE23_OFS      0x24
-#define NETX_XPEC_RANGE45_OFS      0x28
-#define NETX_XPEC_RANGE67_OFS      0x2c
-#define NETX_XPEC_PC_OFS           0x48
-#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
-#define NETX_XPEC_IRQ_OFS          0x8c
-#define NETX_XPEC_SYSTIME_NS_OFS   0x90
-#define NETX_XPEC_FIFO_DATA_OFS    0x94
-#define NETX_XPEC_SYSTIME_S_OFS    0x98
-#define NETX_XPEC_ADC_OFS          0x9c
-#define NETX_XPEC_URX_COUNT_OFS    0x40
-#define NETX_XPEC_UTX_COUNT_OFS    0x44
-#define NETX_XPEC_PC_OFS           0x48
-#define NETX_XPEC_ZERO_OFS         0x4c
-#define NETX_XPEC_STATCFG_OFS      0x50
-#define NETX_XPEC_EC_MASKA_OFS     0x54
-#define NETX_XPEC_EC_MASKB_OFS     0x58
-#define NETX_XPEC_EC_MASK0_OFS     0x5c
-#define NETX_XPEC_EC_MASK8_OFS     0x7c
-#define NETX_XPEC_EC_MASK9_OFS     0x80
-#define NETX_XPEC_XPU_HOLD_PC_OFS  0x100
-#define NETX_XPEC_RAM_START_OFS    0x2000
-
-/* Bits */
-#define XPU_HOLD_PC (1<<0)
-
-/* XMAC register offsets relative to NETX_VA_XMAC(no) */
-#define NETX_XMAC_RPU_PROGRAM_START_OFS       0x000
-#define NETX_XMAC_RPU_PROGRAM_END_OFS         0x3ff
-#define NETX_XMAC_TPU_PROGRAM_START_OFS       0x400
-#define NETX_XMAC_TPU_PROGRAM_END_OFS         0x7ff
-#define NETX_XMAC_RPU_HOLD_PC_OFS             0xa00
-#define NETX_XMAC_TPU_HOLD_PC_OFS             0xa04
-#define NETX_XMAC_STATUS_SHARED0_OFS          0x840
-#define NETX_XMAC_CONFIG_SHARED0_OFS          0x844
-#define NETX_XMAC_STATUS_SHARED1_OFS          0x848
-#define NETX_XMAC_CONFIG_SHARED1_OFS          0x84c
-#define NETX_XMAC_STATUS_SHARED2_OFS          0x850
-#define NETX_XMAC_CONFIG_SHARED2_OFS          0x854
-#define NETX_XMAC_STATUS_SHARED3_OFS          0x858
-#define NETX_XMAC_CONFIG_SHARED3_OFS          0x85c
-
-#define RPU_HOLD_PC            (1<<15)
-#define TPU_HOLD_PC            (1<<15)
-
-/*******************************
- * Pointer FIFO                *
- *******************************/
-
-/* Registers */
-#define NETX_PFIFO_REG(ofs)               __io(NETX_VA_PFIFO + (ofs))
-#define NETX_PFIFO_BASE(pfifo)        NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
-#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
-#define NETX_PFIFO_RESET              NETX_PFIFO_REG(0x100)
-#define NETX_PFIFO_FULL               NETX_PFIFO_REG(0x104)
-#define NETX_PFIFO_EMPTY              NETX_PFIFO_REG(0x108)
-#define NETX_PFIFO_OVEFLOW            NETX_PFIFO_REG(0x10c)
-#define NETX_PFIFO_UNDERRUN           NETX_PFIFO_REG(0x110)
-#define NETX_PFIFO_FILL_LEVEL(pfifo)  NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
-#define NETX_PFIFO_XPEC_ISR(xpec)     NETX_PFIFO_REG(0x400 + ((xpec) << 2))
-
-/*******************************
- * Dual Port Memory            *
- *******************************/
-
-/* Registers */
-#define NETX_DPMAS_REG(ofs)               __io(NETX_VA_DPMAS + (ofs))
-#define NETX_DPMAS_SYS_STAT           NETX_DPMAS_REG(0x4d8)
-#define NETX_DPMAS_INT_STAT           NETX_DPMAS_REG(0x4e0)
-#define NETX_DPMAS_INT_EN             NETX_DPMAS_REG(0x4f0)
-#define NETX_DPMAS_IF_CONF0           NETX_DPMAS_REG(0x608)
-#define NETX_DPMAS_IF_CONF1           NETX_DPMAS_REG(0x60c)
-#define NETX_DPMAS_EXT_CONFIG(cs)     NETX_DPMAS_REG(0x610 + 4 * (cs))
-#define NETX_DPMAS_IO_MODE0           NETX_DPMAS_REG(0x620) /* I/O 32..63 */
-#define NETX_DPMAS_DRV_EN0            NETX_DPMAS_REG(0x624)
-#define NETX_DPMAS_DATA0              NETX_DPMAS_REG(0x628)
-#define NETX_DPMAS_IO_MODE1           NETX_DPMAS_REG(0x630) /* I/O 64..84 */
-#define NETX_DPMAS_DRV_EN1            NETX_DPMAS_REG(0x634)
-#define NETX_DPMAS_DATA1              NETX_DPMAS_REG(0x638)
-
-/* Bits */
-#define NETX_DPMAS_INT_EN_GLB_EN         (1<<31)
-#define NETX_DPMAS_INT_EN_MEM_LCK        (1<<30)
-#define NETX_DPMAS_INT_EN_WDG            (1<<29)
-#define NETX_DPMAS_INT_EN_PIO72          (1<<28)
-#define NETX_DPMAS_INT_EN_PIO47          (1<<27)
-#define NETX_DPMAS_INT_EN_PIO40          (1<<26)
-#define NETX_DPMAS_INT_EN_PIO36          (1<<25)
-#define NETX_DPMAS_INT_EN_PIO35          (1<<24)
-
-#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS  (1<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT  (2<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_IO       (4<<28)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP  (1<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD  (2<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
-
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
-
-#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
-#define NETX_EXT_CONFIG_TADRHOLD(x)  (((x) & 0x7) << 26)
-#define NETX_EXT_CONFIG_TCSON(x)     (((x) & 0x7) << 23)
-#define NETX_EXT_CONFIG_TRDON(x)     (((x) & 0x7) << 20)
-#define NETX_EXT_CONFIG_TWRON(x)     (((x) & 0x7)  << 17)
-#define NETX_EXT_CONFIG_TWROFF(x)    (((x) & 0x1f) << 12)
-#define NETX_EXT_CONFIG_TRDWRCYC(x)  (((x) & 0x1f) << 7)
-#define NETX_EXT_CONFIG_WAIT_POL     (1<<6)
-#define NETX_EXT_CONFIG_WAIT_EN      (1<<5)
-#define NETX_EXT_CONFIG_NRD_MODE     (1<<4)
-#define NETX_EXT_CONFIG_DS_MODE      (1<<3)
-#define NETX_EXT_CONFIG_NWR_MODE     (1<<2)
-#define NETX_EXT_CONFIG_16BIT        (1<<1)
-#define NETX_EXT_CONFIG_CS_ENABLE    (1<<0)
-
-#define NETX_DPMAS_IO_MODE0_WRL   (1<<13)
-#define NETX_DPMAS_IO_MODE0_WAIT  (1<<14)
-#define NETX_DPMAS_IO_MODE0_READY (1<<15)
-#define NETX_DPMAS_IO_MODE0_CS0   (1<<19)
-#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
-
-#define NETX_DPMAS_IO_MODE1_CS2           (1<<15)
-#define NETX_DPMAS_IO_MODE1_CS1           (1<<16)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR   (0<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36  (3<<30)
-
-/*******************************
- * I2C                         *
- *******************************/
-#define NETX_I2C_REG(ofs)	__io(NETX_VA_I2C, (ofs))
-#define NETX_I2C_CTRL	NETX_I2C_REG(0x0)
-#define NETX_I2C_DATA	NETX_I2C_REG(0x4)
-
-#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h
deleted file mode 100644
index 7a80c26178a8..000000000000
--- a/include/asm-arm/arch-netx/param.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/param.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h
deleted file mode 100644
index 4af2ee4a32c1..000000000000
--- a/include/asm-arm/arch-netx/pfifo.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-arm/arch-netx/pfifo.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-
-#ifndef ASM_ARCH_PFIFO_H
-#define ASM_ARCH_PFIFO_H
-
-static inline int pfifo_push(int no, unsigned int pointer)
-{
-	writel(pointer, NETX_PFIFO_BASE(no));
-	return 0;
-}
-
-static inline unsigned int pfifo_pop(int no)
-{
-	return readl(NETX_PFIFO_BASE(no));
-}
-
-static inline int pfifo_fill_level(int no)
-{
-
-	return readl(NETX_PFIFO_FILL_LEVEL(no));
-}
-
-static inline int pfifo_full(int no)
-{
-	return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
-}
-
-static inline int pfifo_empty(int no)
-{
-	return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
-}
-
-int pfifo_request(unsigned int pfifo_mask);
-void pfifo_free(unsigned int pfifo_mask);
-
-#endif /* ASM_ARCH_PFIFO_H */
diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h
deleted file mode 100644
index 52adf368d765..000000000000
--- a/include/asm-arm/arch-netx/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-netx/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include "netx-regs.h"
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
-	       NETX_SYSTEM_RES_CR);
-}
-
-#endif
-
diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h
deleted file mode 100644
index 7fdb42da0b40..000000000000
--- a/include/asm-arm/arch-netx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-netx/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h
deleted file mode 100644
index f89434547102..000000000000
--- a/include/asm-arm/arch-netx/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-arm/arch-netx/uncompress.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-#define REG(x) (*(volatile unsigned long *)(x))
-
-#define UART1_BASE 0x100a00
-#define UART2_BASE 0x100a80
-
-#define UART_DR 0x0
-
-#define UART_CR 0x14
-#define CR_UART_EN (1<<0)
-
-#define UART_FR 0x18
-#define FR_BUSY (1<<3)
-#define FR_TXFF (1<<5)
-
-static void putc(char c)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_TXFF);
-	REG(base + UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_BUSY);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h
deleted file mode 100644
index da2da5a595da..000000000000
--- a/include/asm-arm/arch-netx/vmalloc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/vmalloc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h
deleted file mode 100644
index 659af19512a9..000000000000
--- a/include/asm-arm/arch-netx/xc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-netx/xc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_XC_H
-#define __ASM_ARCH_XC_H
-
-struct xc {
-	int no;
-	unsigned int type;
-	unsigned int version;
-	void __iomem *xpec_base;
-	void __iomem *xmac_base;
-	void __iomem *sram_base;
-	int irq;
-	struct device *dev;
-};
-
-int xc_reset(struct xc *x);
-int xc_stop(struct xc* x);
-int xc_start(struct xc *x);
-int xc_running(struct xc *x);
-int xc_request_firmware(struct xc* x);
-struct xc* request_xc(int xcno, struct device *dev);
-void free_xc(struct xc *x);
-
-#endif /* __ASM_ARCH_XC_H */
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h
deleted file mode 100644
index e57443bdbbd9..000000000000
--- a/include/asm-arm/arch-ns9xxx/board.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/board.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <asm/mach-types.h>
-
-#define board_is_a9m9750dev()	(0			\
-		|| machine_is_cc9p9360dev()		\
-		|| machine_is_cc9p9750dev()		\
-		)
-
-#define board_is_a9mvali()	(0			\
-		|| machine_is_cc9p9360val() 		\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define board_is_jscc9p9210()	(0			\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define board_is_jscc9p9215()	(0			\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define board_is_jscc9p9360()	(0			\
-		|| machine_is_cc9p9360js()		\
-		)
-
-#define board_is_uncbas()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S
deleted file mode 100644
index b21b93eb2dbc..000000000000
--- a/include/asm-arm/arch-ns9xxx/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/debug-macro.S
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/hardware.h>
-
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
-		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h
deleted file mode 100644
index a67cbbe009c4..000000000000
--- a/include/asm-arm/arch-ns9xxx/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/dma.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S
deleted file mode 100644
index 89a21c530468..000000000000
--- a/include/asm-arm/arch-ns9xxx/entry-macro.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/entry-macro.S
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <asm/hardware.h>
-#include <asm/arch-ns9xxx/regs-sys-common.h>
-
-		.macro	get_irqnr_preamble, base, tmp
-		ldr	\base, =SYS_ISRADDR
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
-		cmp	\irqstat, #0
-		ldrne	\irqnr, [\base]
-		.endm
-
-		.macro	disable_fiq
-		.endm
diff --git a/include/asm-arm/arch-ns9xxx/gpio.h b/include/asm-arm/arch-ns9xxx/gpio.h
deleted file mode 100644
index adbca08583c0..000000000000
--- a/include/asm-arm/arch-ns9xxx/gpio.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/gpio.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm/errno.h>
-
-int gpio_request(unsigned gpio, const char *label);
-
-void gpio_free(unsigned gpio);
-
-int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
-
-int gpio_direction_input(unsigned gpio);
-
-int gpio_direction_output(unsigned gpio, int value);
-
-int gpio_get_value(unsigned gpio);
-
-void gpio_set_value(unsigned gpio, int value);
-
-/*
- * ns9xxx can use gpio pins to trigger an irq, but it's not generic
- * enough to be supported by the gpio_to_irq/irq_to_gpio interface
- */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-/* get the cansleep() stubs */
-#include <asm-generic/gpio.h>
-
-#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
deleted file mode 100644
index 0dca11ce21fc..000000000000
--- a/include/asm-arm/arch-ns9xxx/hardware.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/hardware.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/memory.h>
-
-/*
- * NetSilicon NS9xxx internal mapping:
- *
- * physical                <--> virtual
- * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
- * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
- */
-#define io_p2v(x)	(0xf0000000 \
-			 + (((x) & 0xf0000000) >> 4) \
-			 + ((x) & 0x00ffffff))
-
-#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
-			 + ((x) & 0x00ffffff))
-
-#define __REGSHIFT(mask)	((mask) & (-(mask)))
-
-#define __REGBIT(bit)		((u32)1 << (bit))
-#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
-#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
-
-#ifndef __ASSEMBLY__
-
-#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
-#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
-
-#  define __REGSET(var, field, value)					\
-	((var) = (((var) & ~((field) & ~(value))) | (value)))
-
-#  define REGSET(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
-
-#  define REGSET_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
-
-#  define REGSETIM(var, reg, field, value)				\
-	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
-
-#  define REGSETIM_IDX(var, reg, field, idx, value)			\
-	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
-
-#  define __REGGET(var, field)						\
-	(((var) & (field)))
-
-#  define REGGET(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field)
-
-#  define REGGET_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx)))
-
-#  define REGGETIM(var, reg, field)					\
-	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
-
-#  define REGGETIM_IDX(var, reg, field, idx)				\
-	 __REGGET(var, reg ## _ ## field((idx))) /			\
-	 __REGSHIFT(reg ## _ ## field((idx)))
-
-#else
-
-#  define __REG(x)	io_p2v(x)
-#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
-
-#endif
-
-#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h
deleted file mode 100644
index 6f82d28af120..000000000000
--- a/include/asm-arm/arch-ns9xxx/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/io.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT  0xffffffff /* XXX */
-
-#define __io(a)         ((void __iomem *)(a))
-#define __mem_pci(a)    (a)
-#define __mem_isa(a)    (IO_BASE + (a))
-
-#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h
deleted file mode 100644
index e83d48ec42c9..000000000000
--- a/include/asm-arm/arch-ns9xxx/irqs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/irqs.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* NetSilicon 9360 */
-#define IRQ_NS9XXX_WATCHDOG	0
-#define IRQ_NS9XXX_AHBBUSERR	1
-#define IRQ_NS9360_BBUSAGG	2
-/* irq 3 is reserved for NS9360 */
-#define IRQ_NS9XXX_ETHRX	4
-#define IRQ_NS9XXX_ETHTX	5
-#define IRQ_NS9XXX_ETHPHY	6
-#define IRQ_NS9360_LCD		7
-#define IRQ_NS9360_SERBRX	8
-#define IRQ_NS9360_SERBTX	9
-#define IRQ_NS9360_SERARX	10
-#define IRQ_NS9360_SERATX	11
-#define IRQ_NS9360_SERCRX	12
-#define IRQ_NS9360_SERCTX	13
-#define IRQ_NS9360_I2C		14
-#define IRQ_NS9360_BBUSDMA	15
-#define IRQ_NS9360_TIMER0	16
-#define IRQ_NS9360_TIMER1	17
-#define IRQ_NS9360_TIMER2	18
-#define IRQ_NS9360_TIMER3	19
-#define IRQ_NS9360_TIMER4	20
-#define IRQ_NS9360_TIMER5	21
-#define IRQ_NS9360_TIMER6	22
-#define IRQ_NS9360_TIMER7	23
-#define IRQ_NS9360_RTC		24
-#define IRQ_NS9360_USBHOST	25
-#define IRQ_NS9360_USBDEVICE	26
-#define IRQ_NS9360_IEEE1284	27
-#define IRQ_NS9XXX_EXT0		28
-#define IRQ_NS9XXX_EXT1		29
-#define IRQ_NS9XXX_EXT2		30
-#define IRQ_NS9XXX_EXT3		31
-
-#define BBUS_IRQ(irq)	(32 + irq)
-
-#define IRQ_BBUS_DMA		BBUS_IRQ(0)
-#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
-#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
-#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
-#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
-#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
-#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
-#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
-#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
-#define IRQ_BBUS_I2C		BBUS_IRQ(10)
-#define IRQ_BBUS_1284		BBUS_IRQ(11)
-#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
-#define IRQ_BBUS_RTC		BBUS_IRQ(13)
-#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
-#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
-#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
-#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
-
-/*
- * these Interrupts are specific for the a9m9750dev board.
- * They are generated by an FPGA that interrupts the CPU on
- * IRQ_NS9360_EXT2
- */
-#define FPGA_IRQ(irq)	(64 + irq)
-
-#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
-#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
-#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
-#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
-#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
-#define IRQ_FPGA_CF		FPGA_IRQ(5)
-#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
-#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
-
-#define NR_IRQS	72
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h
deleted file mode 100644
index ce1343e593e1..000000000000
--- a/include/asm-arm/arch-ns9xxx/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/memory.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
-*/
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* x in [0..3] */
-#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
-
-#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
-#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h
deleted file mode 100644
index ac08a31111e4..000000000000
--- a/include/asm-arm/arch-ns9xxx/module.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/module.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_MODULE_H
-#define __ASM_ARCH_MODULE_H
-
-#include <asm/mach-types.h>
-
-#define module_is_cc7ucamry()	(0			\
-		|| machine_is_cc7ucamry()		\
-		)
-
-#define module_is_cc9c()	(0			\
-		|| machine_is_cc9c()			\
-		)
-
-#define module_is_cc9p9210()	(0			\
-		|| machine_is_cc9p9210()		\
-		|| machine_is_cc9p9210js()		\
-		)
-
-#define module_is_cc9p9215()	(0			\
-		|| machine_is_cc9p9215()		\
-		|| machine_is_cc9p9215js()		\
-		)
-
-#define module_is_cc9p9360()	(0			\
-		|| machine_is_a9m9360()			\
-		|| machine_is_cc9p9360dev()		\
-		|| machine_is_cc9p9360js()		\
-		|| machine_is_cc9p9360val()		\
-		)
-
-#define module_is_cc9p9750()	(0			\
-		|| machine_is_a9m9750()			\
-		|| machine_is_cc9p9750dev()		\
-		|| machine_is_cc9p9750js()		\
-		|| machine_is_cc9p9750val()		\
-		)
-
-#define module_is_ccw9c()	(0			\
-		|| machine_is_ccw9c()			\
-		)
-
-#define module_is_inc20otter()	(0			\
-		|| machine_is_inc20otter()		\
-		)
-
-#define module_is_otter()	(0			\
-		|| machine_is_otter()			\
-		)
-
-#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h
deleted file mode 100644
index f3aa6c50dbe5..000000000000
--- a/include/asm-arm/arch-ns9xxx/processor-ns9360.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/processor-ns9360.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSORNS9360_H
-#define __ASM_ARCH_PROCESSORNS9360_H
-
-#include <linux/init.h>
-
-void ns9360_reset(char mode);
-
-unsigned long ns9360_systemclock(void) __attribute__((const));
-
-static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
-static inline unsigned long ns9360_cpuclock(void)
-{
-	return ns9360_systemclock() / 2;
-}
-
-void __init ns9360_map_io(void);
-
-extern struct sys_timer ns9360_timer;
-
-int ns9360_gpio_configure(unsigned gpio, int inv, int func);
-
-#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h
deleted file mode 100644
index f7b53b65de81..000000000000
--- a/include/asm-arm/arch-ns9xxx/processor.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/processor.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PROCESSOR_H
-#define __ASM_ARCH_PROCESSOR_H
-
-#include <asm/arch-ns9xxx/module.h>
-
-#define processor_is_ns9210()	(0			\
-		|| module_is_cc7ucamry()		\
-		|| module_is_cc9p9210()			\
-		|| module_is_inc20otter()		\
-		|| module_is_otter()			\
-		)
-
-#define processor_is_ns9215()	(0			\
-		|| module_is_cc9p9215()			\
-		)
-
-#define processor_is_ns9360()	(0			\
-		|| module_is_cc9p9360()			\
-		|| module_is_cc9c()			\
-		|| module_is_ccw9c()			\
-		)
-
-#define processor_is_ns9750()	(0			\
-		|| module_is_cc9p9750()			\
-		)
-
-#define processor_is_ns921x()	(0			\
-		|| processor_is_ns9210()		\
-		|| processor_is_ns9215()		\
-		)
-
-#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h
deleted file mode 100644
index 7ee194dc6354..000000000000
--- a/include/asm-arm/arch-ns9xxx/regs-bbu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-bbu.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBBU_H
-#define __ASM_ARCH_REGSBBU_H
-
-#include <asm/hardware.h>
-
-/* BBus Utility */
-
-/* GPIO Configuration Registers block 1 */
-/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
- * at 0 for each block.  That is, BBU_GCONFb1(0) is GPIO Configuration Register
- * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
-#define BBU_GCONFb1(x)	__REG2(0x90600010, (x))
-#define BBU_GCONFb2(x)	__REG2(0x90600100, (x))
-
-#define BBU_GCONFx_DIR(m)	__REGBIT(3 + (((m) & 7) << 2))
-#define BBU_GCONFx_DIR_INPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 0)
-#define BBU_GCONFx_DIR_OUTPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 1)
-#define BBU_GCONFx_INV(m)	__REGBIT(2 + (((m) & 7) << 2))
-#define BBU_GCONFx_INV_NO(m)		__REGVAL(BBU_GCONFx_INV(m), 0)
-#define BBU_GCONFx_INV_YES(m)		__REGVAL(BBU_GCONFx_INV(m), 1)
-#define BBU_GCONFx_FUNC(m)	__REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
-#define BBU_GCONFx_FUNC_0(m)		__REGVAL(BBU_GCONFx_FUNC(m), 0)
-#define BBU_GCONFx_FUNC_1(m)		__REGVAL(BBU_GCONFx_FUNC(m), 1)
-#define BBU_GCONFx_FUNC_2(m)		__REGVAL(BBU_GCONFx_FUNC(m), 2)
-#define BBU_GCONFx_FUNC_3(m)		__REGVAL(BBU_GCONFx_FUNC(m), 3)
-
-#define BBU_GCTRL1	__REG(0x90600030)
-#define BBU_GCTRL2	__REG(0x90600034)
-#define BBU_GCTRL3	__REG(0x90600120)
-
-#define BBU_GSTAT1	__REG(0x90600040)
-#define BBU_GSTAT2	__REG(0x90600044)
-#define BBU_GSTAT3	__REG(0x90600130)
-
-#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
deleted file mode 100644
index afa3a9db3e1d..000000000000
--- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
-#define __ASM_ARCH_REGSBOARDA9M9750_H
-
-#include <asm/hardware.h>
-
-#define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
-#define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
-#define FPGA_UARTC_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
-#define FPGA_UARTD_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
-
-#define FPGA_IER	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
-#define FPGA_ISR	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
-
-#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h
deleted file mode 100644
index fb455a0ed845..000000000000
--- a/include/asm-arm/arch-ns9xxx/regs-mem.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-mem.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSMEM_H
-#define __ASM_ARCH_REGSMEM_H
-
-#include <asm/hardware.h>
-
-/* Memory Module */
-
-/* Control register */
-#define MEM_CTRL	__REG(0xa0700000)
-
-/* Status register */
-#define MEM_STAT	__REG(0xa0700004)
-
-/* Configuration register */
-#define MEM_CONF	__REG(0xa0700008)
-
-/* Dynamic Memory Control register */
-#define MEM_DMCTRL	__REG(0xa0700020)
-
-/* Dynamic Memory Refresh Timer */
-#define MEM_DMRT	__REG(0xa0700024)
-
-/* Dynamic Memory Read Configuration register */
-#define MEM_DMRC	__REG(0xa0700028)
-
-/* Dynamic Memory Precharge Command Period (tRP) */
-#define MEM_DMPCP	__REG(0xa0700030)
-
-/* Dynamic Memory Active to Precharge Command Period (tRAS) */
-#define MEM_DMAPCP	__REG(0xa0700034)
-
-/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
-#define MEM_DMSRET	__REG(0xa0700038)
-
-/* Dynamic Memory Last Data Out to Active Time (tAPR) */
-#define MEM_DMLDOAT	__REG(0xa070003c)
-
-/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
-#define MEM_DMDIACT	__REG(0xa0700040)
-
-/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
-#define MEM_DMWRT	__REG(0xa0700044)
-
-/* Dynamic Memory Active to Active Command Period (tRC) */
-#define MEM_DMAACP	__REG(0xa0700048)
-
-/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
-#define MEM_DMARP	__REG(0xa070004c)
-
-/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
-#define MEM_DMESRAC	__REG(0xa0700050)
-
-/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
-#define MEM_DMABAABT	__REG(0xa0700054)
-
-/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
-#define MEM_DMLMACT	__REG(0xa0700058)
-
-/* Static Memory Extended Wait */
-#define MEM_SMEW	__REG(0xa0700080)
-
-/* Dynamic Memory Configuration Register x */
-#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
-
-/* Dynamic Memory RAS and CAS Delay x */
-#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
-
-/* Static Memory Configuration Register x */
-#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
-
-/* Static Memory Configuration Register x: Write protect */
-#define MEM_SMC_PSMC		__REGBIT(20)
-#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
-#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
-
-/* Static Memory Configuration Register x: Buffer enable */
-#define MEM_SMC_BSMC		__REGBIT(19)
-#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
-#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
-
-/* Static Memory Configuration Register x: Extended Wait */
-#define MEM_SMC_EW		__REGBIT(8)
-#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
-#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
-
-/* Static Memory Configuration Register x: Byte lane state */
-#define MEM_SMC_PB		__REGBIT(7)
-#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
-#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
-
-/* Static Memory Configuration Register x: Chip select polarity */
-#define MEM_SMC_PC		__REGBIT(6)
-#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
-#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
-
-/* static memory configuration register x: page mode*/
-#define MEM_SMC_PM		__REGBIT(3)
-#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
-#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
-
-/* static memory configuration register x: Memory width */
-#define MEM_SMC_MW		__REGBITS(1, 0)
-#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
-#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
-#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
-
-/* Static Memory Write Enable Delay x */
-#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
-
-/* Static Memory Output Enable Delay x */
-#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
-
-/* Static Memory Read Delay x */
-#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
-
-/* Static Memory Page Mode Read Delay 0 */
-#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
-
-/* Static Memory Write Delay */
-#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
-
-/* Static Memory Turn Round Delay x */
-#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
-
-#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h
deleted file mode 100644
index 956c57cb781f..000000000000
--- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-sys-common.h
- *
- * Copyright (C) 2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_REGSSYSCOMMON_H
-#define __ASM_ARCH_REGSSYSCOMMON_H
-#include <asm/hardware.h>
-
-/* Interrupt Vector Address Register Level x */
-#define SYS_IVA(x)	__REG2(0xa09000c4, (x))
-
-/* Interrupt Configuration registers */
-#define SYS_IC(x)	__REG2(0xa0900144, (x))
-
-/* ISRADDR */
-#define SYS_ISRADDR     __REG(0xa0900164)
-
-/* Interrupt Status Active */
-#define SYS_ISA		__REG(0xa0900168)
-
-/* Interrupt Status Raw */
-#define SYS_ISR		__REG(0xa090016c)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
deleted file mode 100644
index 318b6945afb6..000000000000
--- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_REGSSYSNS9360_H
-#define __ASM_ARCH_REGSSYSNS9360_H
-
-#include <asm/hardware.h>
-
-/* System Control Module */
-
-/* AHB Arbiter Gen Configuration */
-#define SYS_AHBAGENCONF	__REG(0xa0900000)
-
-/* BRC */
-#define SYS_BRC(x)	__REG2(0xa0900004, (x))
-
-/* Timer x Reload Count register */
-#define SYS_TRC(x)	__REG2(0xa0900044, (x))
-
-/* Timer x Read register */
-#define SYS_TR(x)	__REG2(0xa0900084, (x))
-
-/* Timer Interrupt Status register */
-#define SYS_TIS		__REG(0xa0900170)
-
-/* PLL Configuration register */
-#define SYS_PLL		__REG(0xa0900188)
-
-/* PLL FS status */
-#define SYS_PLL_FS		__REGBITS(24, 23)
-
-/* PLL ND status */
-#define SYS_PLL_ND		__REGBITS(20, 16)
-
-/* PLL Configuration register: PLL SW change */
-#define SYS_PLL_SWC		__REGBIT(15)
-#define SYS_PLL_SWC_NO			__REGVAL(SYS_PLL_SWC, 0)
-#define SYS_PLL_SWC_YES			__REGVAL(SYS_PLL_SWC, 1)
-
-/* Timer x Control register */
-#define SYS_TC(x)	__REG2(0xa0900190, (x))
-
-/* Timer x Control register: Timer enable */
-#define SYS_TCx_TEN		__REGBIT(15)
-#define SYS_TCx_TEN_DIS			__REGVAL(SYS_TCx_TEN, 0)
-#define SYS_TCx_TEN_EN			__REGVAL(SYS_TCx_TEN, 1)
-
-/* Timer x Control register: CPU debug mode */
-#define SYS_TCx_TDBG		__REGBIT(10)
-#define SYS_TCx_TDBG_CONT		__REGVAL(SYS_TCx_TDBG, 0)
-#define SYS_TCx_TDBG_STOP		__REGVAL(SYS_TCx_TDBG, 1)
-
-/* Timer x Control register: Interrupt clear */
-#define SYS_TCx_INTC		__REGBIT(9)
-#define SYS_TCx_INTC_UNSET		__REGVAL(SYS_TCx_INTC, 0)
-#define SYS_TCx_INTC_SET		__REGVAL(SYS_TCx_INTC, 1)
-
-/* Timer x Control register: Timer clock select */
-#define SYS_TCx_TLCS		__REGBITS(8, 6)
-#define SYS_TCx_TLCS_CPU		__REGVAL(SYS_TCx_TLCS, 0)	/* CPU clock */
-#define SYS_TCx_TLCS_DIV2		__REGVAL(SYS_TCx_TLCS, 1)	/* CPU clock / 2 */
-#define SYS_TCx_TLCS_DIV4		__REGVAL(SYS_TCx_TLCS, 2)	/* CPU clock / 4 */
-#define SYS_TCx_TLCS_DIV8		__REGVAL(SYS_TCx_TLCS, 3)	/* CPU clock / 8 */
-#define SYS_TCx_TLCS_DIV16		__REGVAL(SYS_TCx_TLCS, 4)	/* CPU clock / 16 */
-#define SYS_TCx_TLCS_DIV32		__REGVAL(SYS_TCx_TLCS, 5)	/* CPU clock / 32 */
-#define SYS_TCx_TLCS_DIV64		__REGVAL(SYS_TCx_TLCS, 6)	/* CPU clock / 64 */
-#define SYS_TCx_TLCS_EXT		__REGVAL(SYS_TCx_TLCS, 7)
-
-/* Timer x Control register: Timer mode */
-#define SYS_TCx_TM		__REGBITS(5, 4)
-#define SYS_TCx_TM_IEE			__REGVAL(SYS_TCx_TM, 0)		/* Internal timer or external event */
-#define SYS_TCx_TM_ELL			__REGVAL(SYS_TCx_TM, 1)		/* External low-level, gated timer */
-#define SYS_TCx_TM_EHL			__REGVAL(SYS_TCx_TM, 2)		/* External high-level, gated timer */
-#define SYS_TCx_TM_CONCAT		__REGVAL(SYS_TCx_TM, 3)		/* Concatenate the lower timer. */
-
-/* Timer x Control register: Interrupt select */
-#define SYS_TCx_INTS		__REGBIT(3)
-#define SYS_TCx_INTS_DIS		__REGVAL(SYS_TCx_INTS, 0)
-#define SYS_TCx_INTS_EN			__REGVAL(SYS_TCx_INTS, 1)
-
-/* Timer x Control register: Up/down select */
-#define SYS_TCx_UDS		__REGBIT(2)
-#define SYS_TCx_UDS_UP			__REGVAL(SYS_TCx_UDS, 0)
-#define SYS_TCx_UDS_DOWN		__REGVAL(SYS_TCx_UDS, 1)
-
-/* Timer x Control register: 32- or 16-bit timer */
-#define SYS_TCx_TSZ		__REGBIT(1)
-#define SYS_TCx_TSZ_16			__REGVAL(SYS_TCx_TSZ, 0)
-#define SYS_TCx_TSZ_32			__REGVAL(SYS_TCx_TSZ, 1)
-
-/* Timer x Control register: Reload enable */
-#define SYS_TCx_REN		__REGBIT(0)
-#define SYS_TCx_REN_DIS			__REGVAL(SYS_TCx_REN, 0)
-#define SYS_TCx_REN_EN			__REGVAL(SYS_TCx_REN, 1)
-
-/* System Memory Chip Select x Dynamic Memory Base */
-#define SYS_SMCSDMB(x)	__REG2(0xa09001d0, (x) << 1)
-
-/* System Memory Chip Select x Dynamic Memory Mask */
-#define SYS_SMCSDMM(x)	__REG2(0xa09001d4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base */
-#define SYS_SMCSSMB(x)	__REG2(0xa09001f0, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Base: Chip select x base */
-#define SYS_SMCSSMB_CSxB	__REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask */
-#define SYS_SMCSSMM(x)	__REG2(0xa09001f4, (x) << 1)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
-#define SYS_SMCSSMM_CSxM	__REGBITS(31, 12)
-
-/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
-#define SYS_SMCSSMM_CSEx	__REGBIT(0)
-#define SYS_SMCSSMM_CSEx_DIS		__REGVAL(SYS_SMCSSMM_CSEx, 0)
-#define SYS_SMCSSMM_CSEx_EN		__REGVAL(SYS_SMCSSMM_CSEx, 1)
-
-/* General purpose, user-defined ID register */
-#define SYS_GENID	__REG(0xa0900210)
-
-/* External Interrupt x Control register */
-#define SYS_EIC(x)	__REG2(0xa0900214, (x))
-
-/* External Interrupt x Control register: Status */
-#define SYS_EIC_STS		__REGBIT(3)
-
-/* External Interrupt x Control register: Clear */
-#define SYS_EIC_CLR		__REGBIT(2)
-
-/* External Interrupt x Control register: Polarity */
-#define SYS_EIC_PLTY		__REGBIT(1)
-#define SYS_EIC_PLTY_AH			__REGVAL(SYS_EIC_PLTY, 0)
-#define SYS_EIC_PLTY_AL			__REGVAL(SYS_EIC_PLTY, 1)
-
-/* External Interrupt x Control register: Level edge */
-#define SYS_EIC_LVEDG		__REGBIT(0)
-#define SYS_EIC_LVEDG_LEVEL		__REGVAL(SYS_EIC_LVEDG, 0)
-#define SYS_EIC_LVEDG_EDGE		__REGVAL(SYS_EIC_LVEDG, 1)
-
-#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h
deleted file mode 100644
index 1348073afe48..000000000000
--- a/include/asm-arm/arch-ns9xxx/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/system.h
- *
- * Copyright (C) 2006,2007 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-#include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-#ifdef CONFIG_PROCESSOR_NS9360
-	if (processor_is_ns9360())
-		ns9360_reset(mode);
-	else
-#endif
-		BUG();
-
-	BUG();
-}
-
-#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h
deleted file mode 100644
index f776cbd2622d..000000000000
--- a/include/asm-arm/arch-ns9xxx/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/timex.h
- *
- * Copyright (C) 2005-2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
- * See there for an explanation.
- */
-#define CLOCK_TICK_RATE         12000000
-
-#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h
deleted file mode 100644
index 71066baceab7..000000000000
--- a/include/asm-arm/arch-ns9xxx/uncompress.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/uncompress.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/io.h>
-
-#define __REG(x)	((void __iomem __force *)(x))
-
-static void putc_dummy(char c, void __iomem *base)
-{
-	/* nothing */
-}
-
-static void putc_ns9360(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (__raw_readl(base + 8) & (1 << 3)) {
-			__raw_writeb(c, base + 16);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-}
-
-static void putc_a9m9750dev(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (__raw_readb(base + 5) & (1 << 5)) {
-			__raw_writeb(c, base);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-
-}
-
-static void putc_ns921x(char c, void __iomem *base)
-{
-	static int t = 0x10000;
-	do {
-		if (t)
-			--t;
-
-		if (!(__raw_readl(base) & (1 << 11))) {
-			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
-			break;
-		}
-	} while (t);
-}
-
-#define MSCS __REG(0xA0900184)
-
-#define NS9360_UARTA	__REG(0x90200040)
-#define NS9360_UARTB	__REG(0x90200000)
-#define NS9360_UARTC	__REG(0x90300000)
-#define NS9360_UARTD	__REG(0x90300040)
-
-#define NS9360_UART_ENABLED(base)					\
-		(__raw_readl(NS9360_UARTA) & (1 << 31))
-
-#define A9M9750DEV_UARTA	__REG(0x40000000)
-
-#define NS921XSYS_CLOCK	__REG(0xa090017c)
-#define NS921X_UARTA	__REG(0x90010000)
-#define NS921X_UARTB	__REG(0x90018000)
-#define NS921X_UARTC	__REG(0x90020000)
-#define NS921X_UARTD	__REG(0x90028000)
-
-#define NS921X_UART_ENABLED(base)					\
-		(__raw_readl((base) + 0x1000) & (1 << 29))
-
-static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
-{
-	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
-		/* ns9360 or ns9750 */
-		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTA;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTB;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTC;
-			return;
-		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
-			*putc = putc_ns9360;
-			*base = NS9360_UARTD;
-			return;
-		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
-			*putc = putc_a9m9750dev;
-			*base = A9M9750DEV_UARTA;
-			return;
-		}
-	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
-		/* ns921x */
-		u32 clock = __raw_readl(NS921XSYS_CLOCK);
-
-		if ((clock & (1 << 1)) &&
-				NS921X_UART_ENABLED(NS921X_UARTA)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTA;
-			return;
-		} else if ((clock & (1 << 2)) &&
-				NS921X_UART_ENABLED(NS921X_UARTB)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTB;
-			return;
-		} else if ((clock & (1 << 3)) &&
-				NS921X_UART_ENABLED(NS921X_UARTC)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTC;
-			return;
-		} else if ((clock & (1 << 4)) &&
-				NS921X_UART_ENABLED(NS921X_UARTD)) {
-			*putc = putc_ns921x;
-			*base = NS921X_UARTD;
-			return;
-		}
-	}
-
-	*putc = putc_dummy;
-}
-
-void (*myputc)(char, void __iomem *);
-void __iomem *base;
-
-static void putc(char c)
-{
-	myputc(c, base);
-}
-
-static void arch_decomp_setup(void)
-{
-	autodetect(&myputc, &base);
-}
-#define arch_decomp_wdog()
-
-static void flush(void)
-{
-	/* nothing */
-}
-
-#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h
deleted file mode 100644
index 2f3cb6f6be24..000000000000
--- a/include/asm-arm/arch-ns9xxx/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-ns9xxx/vmalloc.h
- *
- * Copyright (C) 2006 by Digi International Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END     (0xf0000000)
-
-#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h
deleted file mode 100644
index aec2d6563622..000000000000
--- a/include/asm-arm/arch-omap/aic23.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR		0x00
-#define RIGHT_LINE_VOLUME_ADDR		0x01
-#define LEFT_CHANNEL_VOLUME_ADDR	0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
-#define ANALOG_AUDIO_CONTROL_ADDR	0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
-#define POWER_DOWN_CONTROL_ADDR		0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
-#define SAMPLE_RATE_CONTROL_ADDR	0x08
-#define DIGITAL_INTERFACE_ACT_ADDR	0x09
-#define RESET_CONTROL_ADDR		0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED			0x0100
-#define LIM_MUTED			0x0080
-#define LIV_DEFAULT			0x0017
-#define LIV_MAX				0x001f
-#define LIV_MIN				0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON				0x0080
-#define LHV_DEFAULT			0x0079
-#define LHV_MAX				0x007f
-#define LHV_MIN				0x0000
-
-// Analog audio path control register
-#define STA_REG(x)			((x)<<6)
-#define STE_ENABLED			0x0020
-#define DAC_SELECTED			0x0010
-#define BYPASS_ON			0x0008
-#define INSEL_MIC			0x0004
-#define MICM_MUTED			0x0002
-#define MICB_20DB			0x0001
-
-// Digital audio path control register
-#define DACM_MUTE			0x0008
-#define DEEMP_32K			0x0002
-#define DEEMP_44K			0x0004
-#define DEEMP_48K			0x0006
-#define ADCHP_ON			0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF	  	0x0080
-#define CLK_OFF				0x0040
-#define OSC_OFF				0x0020
-#define OUT_OFF				0x0010
-#define DAC_OFF				0x0008
-#define ADC_OFF				0x0004
-#define MIC_OFF				0x0002
-#define LINE_OFF			0x0001
-
-// Digital audio interface register
-#define MS_MASTER			0x0040
-#define LRSWAP_ON			0x0020
-#define LRP_ON				0x0010
-#define IWL_16				0x0000
-#define IWL_20				0x0004
-#define IWL_24				0x0008
-#define IWL_32				0x000C
-#define FOR_I2S				0x0002
-#define FOR_DSP				0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF			0x0080
-#define CLKIN_HALF			0x0040
-#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON			0x0001
-#define SR_MASK                         0xf
-#define CLKOUT_SHIFT                    7
-#define CLKIN_SHIFT                     6
-#define SR_SHIFT                        2
-#define BOSR_SHIFT                      1
-
-// Digital interface register
-#define ACT_ON				0x0001
-
-#define TLV320AIC23ID1                  (0x1a)	// cs low
-#define TLV320AIC23ID2                  (0x1b)	// cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
diff --git a/include/asm-arm/arch-omap/blizzard.h b/include/asm-arm/arch-omap/blizzard.h
deleted file mode 100644
index 8d160f171372..000000000000
--- a/include/asm-arm/arch-omap/blizzard.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _BLIZZARD_H
-#define _BLIZZARD_H
-
-struct blizzard_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
-	unsigned	te_connected : 1;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h
deleted file mode 100644
index c7db9004ec31..000000000000
--- a/include/asm-arm/arch-omap/board-2430sdp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-2430sdp.h
- *
- * Hardware definitions for TI OMAP2430 SDP board.
- *
- * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_2430SDP_H
-#define __ASM_ARCH_OMAP_2430SDP_H
-
-/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START		 0x08000300
-#define OMAP24XX_ETHR_GPIO_IRQ		149
-#define SDP2430_CS0_BASE		0x04000000
-
-#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
-
-#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h
deleted file mode 100644
index 9aee15d97145..000000000000
--- a/include/asm-arm/arch-omap/board-ams-delta.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-ams-delta.h
- *
- * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
-#define __ASM_ARCH_OMAP_AMS_DELTA_H
-
-#if defined (CONFIG_MACH_AMS_DELTA)
-
-#define AMS_DELTA_LATCH1_PHYS		0x01000000
-#define AMS_DELTA_LATCH1_VIRT		0xEA000000
-#define AMS_DELTA_MODEM_PHYS		0x04000000
-#define AMS_DELTA_MODEM_VIRT		0xEB000000
-#define AMS_DELTA_LATCH2_PHYS		0x08000000
-#define AMS_DELTA_LATCH2_VIRT		0xEC000000
-
-#define AMS_DELTA_LATCH1_LED_CAMERA	0x01
-#define AMS_DELTA_LATCH1_LED_ADVERT	0x02
-#define AMS_DELTA_LATCH1_LED_EMAIL	0x04
-#define AMS_DELTA_LATCH1_LED_HANDSFREE	0x08
-#define AMS_DELTA_LATCH1_LED_VOICEMAIL	0x10
-#define AMS_DELTA_LATCH1_LED_VOICE	0x20
-
-#define AMS_DELTA_LATCH2_LCD_VBLEN	0x0001
-#define AMS_DELTA_LATCH2_LCD_NDISP	0x0002
-#define AMS_DELTA_LATCH2_NAND_NCE	0x0004
-#define AMS_DELTA_LATCH2_NAND_NRE	0x0008
-#define AMS_DELTA_LATCH2_NAND_NWP	0x0010
-#define AMS_DELTA_LATCH2_NAND_NWE	0x0020
-#define AMS_DELTA_LATCH2_NAND_ALE	0x0040
-#define AMS_DELTA_LATCH2_NAND_CLE	0x0080
-#define AMD_DELTA_LATCH2_KEYBRD_PWR	0x0100
-#define AMD_DELTA_LATCH2_KEYBRD_DATA	0x0200
-#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
-#define AMS_DELTA_LATCH2_MODEM_NRESET	0x1000
-#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
-
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
-#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
-#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
-#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
-#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
-#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
-#define AMS_DELTA_GPIO_PIN_CONFIG	11
-#define AMS_DELTA_GPIO_PIN_NAND_RB	12
-
-#ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
-#endif
-
-#endif /* CONFIG_MACH_AMS_DELTA */
-
-#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h
deleted file mode 100644
index 547125a4695e..000000000000
--- a/include/asm-arm/arch-omap/board-apollon.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-apollon.h
- *
- * Hardware definitions for Samsung OMAP24XX Apollon board.
- *
- * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_APOLLON_H
-#define __ASM_ARCH_OMAP_APOLLON_H
-
-extern void apollon_mmc_init(void);
-
-/* Placeholder for APOLLON specific defines */
-#define APOLLON_ETHR_GPIO_IRQ		74
-
-#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
-
diff --git a/include/asm-arm/arch-omap/board-fsample.h b/include/asm-arm/arch-omap/board-fsample.h
deleted file mode 100644
index 89a1e529fb6f..000000000000
--- a/include/asm-arm/arch-omap/board-fsample.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <asm/arch/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h
deleted file mode 100644
index c322796d0d26..000000000000
--- a/include/asm-arm/arch-omap/board-h2.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-/* Placeholder for H2 specific defines */
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-extern void h2_mmc_init(void);
-extern void h2_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /*  __ASM_ARCH_OMAP_H2_H */
-
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
deleted file mode 100644
index c5d0f32a40ac..000000000000
--- a/include/asm-arm/arch-omap/board-h3.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
-extern void h3_mmc_init(void);
-extern void h3_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h
deleted file mode 100644
index 7e0efef4bb65..000000000000
--- a/include/asm-arm/arch-omap/board-h4.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-h4.h
- *
- * Hardware definitions for TI OMAP1610 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ		92
-#endif /*  __ASM_ARCH_OMAP_H4_H */
-
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
deleted file mode 100644
index 9ca03dec9d36..000000000000
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-innovator.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
-#define __ASM_ARCH_OMAP_INNOVATOR_H
-
-#if defined (CONFIG_ARCH_OMAP15XX)
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
-#endif
-
-#define OMAP1510P1_IMIF_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
-#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
-
-#ifndef __ASSEMBLY__
-void fpga_write(unsigned char val, int reg);
-unsigned char fpga_read(int reg);
-#endif
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined (CONFIG_ARCH_OMAP16XX)
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-#endif /* CONFIG_ARCH_OMAP1610 */
-#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/include/asm-arm/arch-omap/board-nokia.h b/include/asm-arm/arch-omap/board-nokia.h
deleted file mode 100644
index 72deea203493..000000000000
--- a/include/asm-arm/arch-omap/board-nokia.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board-nokia.h
- *
- *  Information structures for Nokia-specific board config data
- *
- *  Copyright (C) 2005	Nokia Corporation
- */
-
-#ifndef _OMAP_BOARD_NOKIA_H
-#define _OMAP_BOARD_NOKIA_H
-
-#include <linux/types.h>
-
-#define OMAP_TAG_NOKIA_BT	0x4e01
-#define OMAP_TAG_WLAN_CX3110X	0x4e02
-#define OMAP_TAG_CBUS		0x4e03
-#define OMAP_TAG_EM_ASIC_BB5	0x4e04
-
-
-#define BT_CHIP_CSR		1
-#define BT_CHIP_TI		2
-
-#define BT_SYSCLK_12		1
-#define BT_SYSCLK_38_4		2
-
-struct omap_bluetooth_config {
-	u8    chip_type;
-	u8    bt_wakeup_gpio;
-	u8    host_wakeup_gpio;
-	u8    reset_gpio;
-	u8    bt_uart;
-	u8    bd_addr[6];
-	u8    bt_sysclk;
-};
-
-struct omap_wlan_cx3110x_config {
-	u8  chip_type;
-	s16 power_gpio;
-	s16 irq_gpio;
-	s16 spi_cs_gpio;
-};
-
-struct omap_cbus_config {
-	s16 clk_gpio;
-	s16 dat_gpio;
-	s16 sel_gpio;
-};
-
-struct omap_em_asic_bb5_config {
-	s16 retu_irq_gpio;
-	s16 tahvo_irq_gpio;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h
deleted file mode 100644
index 94926090e475..000000000000
--- a/include/asm-arm/arch-omap/board-osk.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-osk.h
- *
- * Hardware definitions for TI OMAP5912 OSK board.
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_OSK_H
-#define __ASM_ARCH_OMAP_OSK_H
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START		0x04800300
-
-/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
-#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
-#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
-#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
-#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
-#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
-
-#endif /*  __ASM_ARCH_OMAP_OSK_H */
-
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
deleted file mode 100644
index 6fac2c8935be..000000000000
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten E device.
- *
- * Maintainters :	http://palmtelinux.sf.net
- *			palmtelinux-developpers@lists.sf.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTE_H
-#define __OMAP_BOARD_PALMTE_H
-
-#define PALMTE_USBDETECT_GPIO	0
-#define PALMTE_USB_OR_DC_GPIO	1
-#define PALMTE_TSC_GPIO		4
-#define PALMTE_PINTDAV_GPIO	6
-#define PALMTE_MMC_WP_GPIO	8
-#define PALMTE_MMC_POWER_GPIO	9
-#define PALMTE_HDQ_GPIO		11
-#define PALMTE_HEADPHONES_GPIO	14
-#define PALMTE_SPEAKER_GPIO	15
-#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
-
-#endif	/* __OMAP_BOARD_PALMTE_H */
diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/include/asm-arm/arch-omap/board-palmtt.h
deleted file mode 100644
index d9590b0ec90e..000000000000
--- a/include/asm-arm/arch-omap/board-palmtt.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten|T device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTT_H
-#define __OMAP_BOARD_PALMTT_H
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-#endif	/* __OMAP_BOARD_PALMTT_H */
diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/include/asm-arm/arch-omap/board-palmz71.h
deleted file mode 100644
index 1252a859787d..000000000000
--- a/include/asm-arm/arch-omap/board-palmz71.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board-palmz71.h
- *
- * Hardware definitions for the Palm Zire71 device.
- *
- * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMZ71_H
-#define __OMAP_BOARD_PALMZ71_H
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-#endif	/* __OMAP_BOARD_PALMZ71_H */
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
deleted file mode 100644
index d7429cb0f726..000000000000
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board-perseus2.h
- *
- *  Copyright 2003 by Texas Instruments Incorporated
- *    OMAP730 / Perseus2 support by Jean Pihet
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
-#define __ASM_ARCH_OMAP_PERSEUS2_H
-
-#include <asm/arch/fpga.h>
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/board-sx1.h b/include/asm-arm/arch-omap/board-sx1.h
deleted file mode 100644
index 355adbdaae33..000000000000
--- a/include/asm-arm/arch-omap/board-sx1.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Siemens SX1 board definitions
- *
- * Copyright: Vovan888 at gmail com
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
-#define __ASM_ARCH_SX1_I2C_CHIPS_H
-
-#define SOFIA_MAX_LIGHT_VAL	0x2B
-
-#define SOFIA_I2C_ADDR		0x32
-/* Sofia reg 3 bits masks */
-#define SOFIA_POWER1_REG	0x03
-
-#define	SOFIA_USB_POWER		0x01
-#define	SOFIA_MMC_POWER		0x04
-#define	SOFIA_BLUETOOTH_POWER	0x08
-#define	SOFIA_MMILIGHT_POWER	0x20
-
-#define SOFIA_POWER2_REG	0x04
-#define SOFIA_BACKLIGHT_REG	0x06
-#define SOFIA_KEYLIGHT_REG	0x07
-#define SOFIA_DIMMING_REG	0x09
-
-
-/* Function Prototypes for SX1 devices control on I2C bus */
-
-int sx1_setbacklight(u8 backlight);
-int sx1_getbacklight(u8 *backlight);
-int sx1_setkeylight(u8 keylight);
-int sx1_getkeylight(u8 *keylight);
-
-int sx1_setmmipower(u8 onoff);
-int sx1_setusbpower(u8 onoff);
-int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
-int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
-
-/* MMC prototypes */
-
-extern void sx1_mmc_init(void);
-extern void sx1_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/include/asm-arm/arch-omap/board-voiceblue.h
deleted file mode 100644
index ed6d346ee123..000000000000
--- a/include/asm-arm/arch-omap/board-voiceblue.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-extern void voiceblue_reset(void);
-
-#endif /*  __ASM_ARCH_VOICEBLUE_H */
-
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
deleted file mode 100644
index db44c5d1f1a0..000000000000
--- a/include/asm-arm/arch-omap/board.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004	Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <asm/arch/gpio-switch.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_MMC		0x4f02
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB		0x4f04
-#define OMAP_TAG_LCD		0x4f05
-#define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_UART		0x4f07
-#define OMAP_TAG_FBMEM		0x4f08
-#define OMAP_TAG_STI_CONSOLE	0x4f09
-#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART	0x4f81
-#define OMAP_TAG_VERSION_STR	0x4f82
-
-struct omap_clock_config {
-	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-	u8 system_clock_type;
-};
-
-struct omap_mmc_conf {
-	unsigned enabled:1;
-	/* nomux means "standard" muxing is wrong on this board, and that
-	 * board-specific code handled it before common init logic.
-	 */
-	unsigned nomux:1;
-	/* switch pin can be for card detect (default) or card cover */
-	unsigned cover:1;
-	/* 4 wire signaling is optional, and is only used for SD/SDIO */
-	unsigned wire4:1;
-	s16 power_pin;
-	s16 switch_pin;
-	s16 wp_pin;
-};
-
-struct omap_mmc_config {
-	struct omap_mmc_conf mmc[2];
-};
-
-struct omap_serial_console_config {
-	u8 console_uart;
-	u32 console_speed;
-};
-
-struct omap_sti_console_config {
-	unsigned enable:1;
-	u8 channel;
-};
-
-struct omap_camera_sensor_config {
-	u16 reset_gpio;
-	int (*power_on)(void * data);
-	int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-};
-
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-	s16  nreset_gpio;
-	u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-	int default_intensity;
-	int (*set_power)(struct device *dev, int state);
-	int (*check_fb)(struct fb_info *fb);
-};
-
-struct omap_fbmem_config {
-	u32 start;
-	u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-	const char *name;
-	int intensity_timer;
-	int blink_timer;
-	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-	char part_table[0];
-};
-
-struct omap_boot_reason_config {
-	char reason_str[12];
-};
-
-struct omap_version_config {
-	char component[12];
-	char version[12];
-};
-
-
-#include <asm-arm/arch-omap/board-nokia.h>
-
-struct omap_board_config_entry {
-	u16 tag;
-	u16 len;
-	u8  data[0];
-};
-
-struct omap_board_config_kernel {
-	u16 tag;
-	const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
deleted file mode 100644
index 4c7b3514f71a..000000000000
--- a/include/asm-arm/arch-omap/clock.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/clock.h
- *
- *  Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-struct module;
-struct clk;
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
-struct clksel_rate {
-	u8			div;
-	u32			val;
-	u8			flags;
-};
-
-struct clksel {
-	struct clk		 *parent;
-	const struct clksel_rate *rates;
-};
-
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	u16			last_rounded_m;
-	u8			last_rounded_n;
-	unsigned long		last_rounded_rate;
-	unsigned int		rate_tolerance;
-	u16			max_multiplier;
-	u8			max_divider;
-	u32			max_tolerance;
-#  if defined(CONFIG_ARCH_OMAP3)
-	u8			modes;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-	void __iomem		*autoidle_reg;
-	u32			autoidle_mask;
-	void __iomem		*idlest_reg;
-	u8			idlest_bit;
-#  endif
-};
-
-#endif
-
-struct clk {
-	struct list_head	node;
-	struct module		*owner;
-	const char		*name;
-	int			id;
-	struct clk		*parent;
-	unsigned long		rate;
-	__u32			flags;
-	void __iomem		*enable_reg;
-	__u8			enable_bit;
-	__s8			usecount;
-	void			(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	u8			fixed_div;
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-#else
-	__u8			rate_offset;
-	__u8			src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-struct cpufreq_frequency_table;
-
-struct clk_functions {
-	int		(*clk_enable)(struct clk *clk);
-	void		(*clk_disable)(struct clk *clk);
-	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	struct clk *	(*clk_get_parent)(struct clk *clk);
-	void		(*clk_allow_idle)(struct clk *clk);
-	void		(*clk_deny_idle)(struct clk *clk);
-	void		(*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
-};
-
-extern unsigned int mpurate;
-
-extern int clk_init(struct clk_functions * custom_clocks);
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-
-/* Clock flags */
-#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
-#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
-#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
-#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
-#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
-#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
-#define CLOCK_IDLE_CONTROL	(1 << 7)
-#define CLOCK_NO_IDLE_PARENT	(1 << 8)
-#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
-#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
-#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
-#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310	(1 << 21)
-#define CLOCK_IN_OMAP730	(1 << 22)
-#define CLOCK_IN_OMAP1510	(1 << 23)
-#define CLOCK_IN_OMAP16XX	(1 << 24)
-#define CLOCK_IN_OMAP242X	(1 << 25)
-#define CLOCK_IN_OMAP243X	(1 << 26)
-#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK	(1 << 28)
-#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
-
-/* Clksel_rate flags */
-#define DEFAULT_RATE		(1 << 0)
-#define RATE_IN_242X		(1 << 1)
-#define RATE_IN_243X		(1 << 2)
-#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
-#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
-
-#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-
-
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K		0
-#define CORE_CLK_SRC_DPLL		1
-#define CORE_CLK_SRC_DPLL_X2		2
-
-#endif
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
deleted file mode 100644
index 8ac03071f60c..000000000000
--- a/include/asm-arm/arch-omap/common.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <linux/i2c.h>
-
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-#ifdef CONFIG_I2C_OMAP
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
-
-/* IO bases for various OMAP processors */
-struct omap_globals {
-	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;		/* SDRAM Controller */
-	void __iomem	*sms;		/* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;		/* System Control Module */
-	void __iomem	*prm;		/* Power and Reset Management */
-	void __iomem	*cm;		/* Clock Management */
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_343x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_memory(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
deleted file mode 100644
index 987553e3eeb9..000000000000
--- a/include/asm-arm/arch-omap/control.h
+++ /dev/null
@@ -1,189 +0,0 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
-/*
- * include/asm-arm/arch-omap/control.h
- *
- * OMAP2/3 System Control Module definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#include <asm/arch/io.h>
-
-#define OMAP242X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-
-/*
- * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
- * OMAP24XX and OMAP34XX.
- */
-
-/* Control submodule offsets */
-
-#define OMAP2_CONTROL_INTERFACE		0x000
-#define OMAP2_CONTROL_PADCONFS		0x030
-#define OMAP2_CONTROL_GENERAL		0x270
-#define OMAP343X_CONTROL_MEM_WKUP	0x600
-#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
-#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
-
-/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
-
-#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
-
-/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
-#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
-#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
-#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
-#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
-#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
-#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
-#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
-#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
-#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
-#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
-#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
-#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
-
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
-
-/* 34xx-only CONTROL_GENERAL register offsets */
-#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
-#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
-#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
-#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
-#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
-#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
-#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
-#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
-#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
-#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-
-/*
- * REVISIT: This list of registers is not comprehensive - there are more
- * that should be added.
- */
-
-/*
- * Control module register bit defines - these should eventually go into
- * their own regbits file.  Some of these will be complicated, depending
- * on the device type (general-purpose, emulator, test, secure, bad, other)
- * and the security mode (secure, non-secure, don't care)
- */
-/* CONTROL_DEVCONF0 bits */
-#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
-#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
-#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
-
-/* CONTROL_DEVCONF1 bits */
-#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
-#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
-#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
-
-/* CONTROL_STATUS bits */
-#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
-#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
-#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
-#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
-#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
-#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
-#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-extern void __iomem *omap_ctrl_base_get(void);
-extern u8 omap_ctrl_readb(u16 offset);
-extern u16 omap_ctrl_readw(u16 offset);
-extern u32 omap_ctrl_readl(u16 offset);
-extern void omap_ctrl_writeb(u8 val, u16 offset);
-extern void omap_ctrl_writew(u16 val, u16 offset);
-extern void omap_ctrl_writel(u32 val, u16 offset);
-#else
-#define omap_ctrl_base_get()		0
-#define omap_ctrl_readb(x)		0
-#define omap_ctrl_readw(x)		0
-#define omap_ctrl_readl(x)		0
-#define omap_ctrl_writeb(x, y)		WARN_ON(1)
-#define omap_ctrl_writew(x, y)		WARN_ON(1)
-#define omap_ctrl_writel(x, y)		WARN_ON(1)
-#endif
-#endif	/* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_CONTROL_H */
-
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
deleted file mode 100644
index 52db09f83281..000000000000
--- a/include/asm-arm/arch-omap/cpu.h
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/cpu.h
- *
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-struct omap_chip_id {
-	u8 oc;
-};
-
-#define OMAP_CHIP_INIT(x)	{ .oc = x }
-
-extern unsigned int system_rev;
-
-#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- */
-#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  undef  cpu_is_omap242x
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap24xx()		is_omap24xx()
-#  define cpu_is_omap242x()		is_omap242x()
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap330():	True for OMAP330
- * cpu_is_omap730():	True for OMAP730
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
- */
-#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap730()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		is_omap730()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap730
-#  define cpu_is_omap730()		1
-# endif
-#endif
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
- */
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP34XX)
-# undef cpu_is_omap3430
-# define cpu_is_omap3430()		is_omap3430()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
-				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-/*
- * Macros to detect silicon revision of OMAP2/3 processors.
- * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
- * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
- * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
- * get_sil_rev:			return the silicon rev value.
- */
-#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
-#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
-
-#define is_sil_rev_greater_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) > get_sil_revision(rev)))
-
-#define is_sil_rev_less_than(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) < get_sil_revision(rev)))
-
-#define is_sil_rev_equal_to(rev) \
-		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
-		(get_sil_revision(system_rev) == get_sil_revision(rev)))
-
-#define get_sil_rev() \
-		get_sil_revision(system_rev)
-
-/* Various silicon macros defined here */
-#define OMAP2420_REV_ES1_0	0x24200000
-#define OMAP2420_REV_ES2_0	0x24201000
-#define OMAP2430_REV_ES1_0	0x24300000
-#define OMAP3430_REV_ES1_0	0x34300000
-#define OMAP3430_REV_ES2_0	0x34301000
-#define OMAP3430_REV_ES2_1	0x34302000
-#define OMAP3430_REV_ES2_2	0x34303000
-
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420       (1 << 0)
-#define CHIP_IS_OMAP2430       (1 << 1)
-#define CHIP_IS_OMAP3430       (1 << 2)
-#define CHIP_IS_OMAP3430ES1    (1 << 3)
-#define CHIP_IS_OMAP3430ES2    (1 << 4)
-
-#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-int omap_chip_is(struct omap_chip_id oci);
-
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define DEVICE_TYPE_TEST	0
-#define DEVICE_TYPE_EMU		1
-#define DEVICE_TYPE_SEC		2
-#define DEVICE_TYPE_GP		3
-#define DEVICE_TYPE_BAD		4
-
-#define get_device_type()	((system_rev & 0x700) >> 8)
-#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
-#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
-#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
-#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
-#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
-
-void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S
deleted file mode 100644
index ca4f577f9675..000000000000
--- a/include/asm-arm/arch-omap/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-omap/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
-
-#elif  CONFIG_ARCH_OMAP2
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00004000	@ UART 3
-#endif
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
deleted file mode 100644
index f4dcb9587869..000000000000
--- a/include/asm-arm/arch-omap/dma.h
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/dma.h
- *
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE			(0xfffed800)
-
-#define OMAP1_DMA_GCR			0x400
-#define OMAP1_DMA_GSCR			0x404
-#define OMAP1_DMA_GRST			0x408
-#define OMAP1_DMA_HW_ID			0x442
-#define OMAP1_DMA_PCH2_ID		0x444
-#define OMAP1_DMA_PCH0_ID		0x446
-#define OMAP1_DMA_PCH1_ID		0x448
-#define OMAP1_DMA_PCHG_ID		0x44a
-#define OMAP1_DMA_PCHD_ID		0x44c
-#define OMAP1_DMA_CAPS_0_U		0x44e
-#define OMAP1_DMA_CAPS_0_L		0x450
-#define OMAP1_DMA_CAPS_1_U		0x452
-#define OMAP1_DMA_CAPS_1_L		0x454
-#define OMAP1_DMA_CAPS_2		0x456
-#define OMAP1_DMA_CAPS_3		0x458
-#define OMAP1_DMA_CAPS_4		0x45a
-#define OMAP1_DMA_PCH2_SR		0x460
-#define OMAP1_DMA_PCH0_SR		0x480
-#define OMAP1_DMA_PCH1_SR		0x482
-#define OMAP1_DMA_PCHD_SR		0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION		0x00
-#define OMAP_DMA4_GCR			0x78
-#define OMAP_DMA4_IRQSTATUS_L0		0x08
-#define OMAP_DMA4_IRQSTATUS_L1		0x0c
-#define OMAP_DMA4_IRQSTATUS_L2		0x10
-#define OMAP_DMA4_IRQSTATUS_L3		0x14
-#define OMAP_DMA4_IRQENABLE_L0		0x18
-#define OMAP_DMA4_IRQENABLE_L1		0x1c
-#define OMAP_DMA4_IRQENABLE_L2		0x20
-#define OMAP_DMA4_IRQENABLE_L3		0x24
-#define OMAP_DMA4_SYSSTATUS		0x28
-#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
-#define OMAP_DMA4_CAPS_0		0x64
-#define OMAP_DMA4_CAPS_2		0x6c
-#define OMAP_DMA4_CAPS_3		0x70
-#define OMAP_DMA4_CAPS_4		0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
-#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
-#define OMAP1_DMA_CCEN(n)		0
-#define OMAP1_DMA_CCFN(n)		0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION		0
-#define OMAP1_DMA_IRQSTATUS_L0		0
-#define OMAP1_DMA_IRQENABLE_L0		0
-#define OMAP1_DMA_OCP_SYSCONFIG		0
-#define OMAP_DMA4_HW_ID			0
-#define OMAP_DMA4_CAPS_0_L		0
-#define OMAP_DMA4_CAPS_0_U		0
-#define OMAP_DMA4_CAPS_1_L		0
-#define OMAP_DMA4_CAPS_1_U		0
-#define OMAP_DMA4_GSCR			0
-#define OMAP_DMA4_CPC(n)		0
-
-#define OMAP_DMA4_LCH_CTRL(n)		0
-#define OMAP_DMA4_COLOR_L(n)		0
-#define OMAP_DMA4_COLOR_U(n)		0
-#define OMAP_DMA4_CCR2(n)		0
-#define OMAP1_DMA_CSSA(n)		0
-#define OMAP1_DMA_CDSA(n)		0
-#define OMAP_DMA4_CSSA_L(n)		0
-#define OMAP_DMA4_CSSA_U(n)		0
-#define OMAP_DMA4_CDSA_L(n)		0
-#define OMAP_DMA4_CDSA_U(n)		0
-
-/*----------------------------------------------------------------------------*/
-
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE		0
-#define OMAP_DMA_MCSI1_TX		1
-#define OMAP_DMA_MCSI1_RX		2
-#define OMAP_DMA_I2C_RX			3
-#define OMAP_DMA_I2C_TX			4
-#define OMAP_DMA_EXT_NDMA_REQ		5
-#define OMAP_DMA_EXT_NDMA_REQ2		6
-#define OMAP_DMA_UWIRE_TX		7
-#define OMAP_DMA_MCBSP1_TX		8
-#define OMAP_DMA_MCBSP1_RX		9
-#define OMAP_DMA_MCBSP3_TX		10
-#define OMAP_DMA_MCBSP3_RX		11
-#define OMAP_DMA_UART1_TX		12
-#define OMAP_DMA_UART1_RX		13
-#define OMAP_DMA_UART2_TX		14
-#define OMAP_DMA_UART2_RX		15
-#define OMAP_DMA_MCBSP2_TX		16
-#define OMAP_DMA_MCBSP2_RX		17
-#define OMAP_DMA_UART3_TX		18
-#define OMAP_DMA_UART3_RX		19
-#define OMAP_DMA_CAMERA_IF_RX		20
-#define OMAP_DMA_MMC_TX			21
-#define OMAP_DMA_MMC_RX			22
-#define OMAP_DMA_NAND			23
-#define OMAP_DMA_IRQ_LCD_LINE		24
-#define OMAP_DMA_MEMORY_STICK		25
-#define OMAP_DMA_USB_W2FC_RX0		26
-#define OMAP_DMA_USB_W2FC_RX1		27
-#define OMAP_DMA_USB_W2FC_RX2		28
-#define OMAP_DMA_USB_W2FC_TX0		29
-#define OMAP_DMA_USB_W2FC_TX1		30
-#define OMAP_DMA_USB_W2FC_TX2		31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN		32
-#define OMAP_DMA_SPI_TX			33
-#define OMAP_DMA_SPI_RX			34
-#define OMAP_DMA_CRYPTO_HASH		35
-#define OMAP_DMA_CCP_ATTN		36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
-#define OMAP_DMA_MMC2_TX		54
-#define OMAP_DMA_MMC2_RX		55
-#define OMAP_DMA_CRYPTO_DES_OUT		56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE		0
-#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
-#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
-#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
-#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
-
-/*----------------------------------------------------------------------------*/
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
-#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
-#define OMAP_DMA_DROP_IRQ		(1 << 1)
-#define OMAP_DMA_HALF_IRQ		(1 << 2)
-#define OMAP_DMA_FRAME_IRQ		(1 << 3)
-#define OMAP_DMA_LAST_IRQ		(1 << 4)
-#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
-#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
-#define OMAP2_DMA_PKT_IRQ		(1 << 7)
-#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
-#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
-#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
-#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
-
-#define OMAP_DMA_DATA_TYPE_S8		0x00
-#define OMAP_DMA_DATA_TYPE_S16		0x01
-#define OMAP_DMA_DATA_TYPE_S32		0x02
-
-#define OMAP_DMA_SYNC_ELEMENT		0x00
-#define OMAP_DMA_SYNC_FRAME		0x01
-#define OMAP_DMA_SYNC_BLOCK		0x02
-#define OMAP_DMA_SYNC_PACKET		0x03
-
-#define OMAP_DMA_SRC_SYNC		0x01
-#define OMAP_DMA_DST_SYNC		0x00
-
-#define OMAP_DMA_PORT_EMIFF		0x00
-#define OMAP_DMA_PORT_EMIFS		0x01
-#define OMAP_DMA_PORT_OCP_T1		0x02
-#define OMAP_DMA_PORT_TIPB		0x03
-#define OMAP_DMA_PORT_OCP_T2		0x04
-#define OMAP_DMA_PORT_MPUI		0x05
-
-#define OMAP_DMA_AMODE_CONSTANT		0x00
-#define OMAP_DMA_AMODE_POST_INC		0x01
-#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
-#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
-
-#define DMA_DEFAULT_FIFO_DEPTH		0x10
-#define DMA_DEFAULT_ARB_RATE		0x01
-/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
-#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
-#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
-#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
-#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
-#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
-#define DMA_THREAD_FIFO_75		(0x01 << 14)
-#define DMA_THREAD_FIFO_25		(0x02 << 14)
-#define DMA_THREAD_FIFO_50		(0x03 << 14)
-
-/* Chaining modes*/
-#ifndef CONFIG_ARCH_OMAP1
-#define OMAP_DMA_STATIC_CHAIN		0x1
-#define OMAP_DMA_DYNAMIC_CHAIN		0x2
-#define OMAP_DMA_CHAIN_ACTIVE		0x1
-#define OMAP_DMA_CHAIN_INACTIVE		0x0
-#endif
-
-#define DMA_CH_PRIO_HIGH		0x1
-#define DMA_CH_PRIO_LOW			0x0 /* Def */
-
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
-enum omap_dma_burst_mode {
-	OMAP_DMA_DATA_BURST_DIS = 0,
-	OMAP_DMA_DATA_BURST_4,
-	OMAP_DMA_DATA_BURST_8,
-	OMAP_DMA_DATA_BURST_16,
-};
-
-enum end_type {
-	OMAP_DMA_LITTLE_ENDIAN = 0,
-	OMAP_DMA_BIG_ENDIAN
-};
-
-enum omap_dma_color_mode {
-	OMAP_DMA_COLOR_DIS = 0,
-	OMAP_DMA_CONSTANT_FILL,
-	OMAP_DMA_TRANSPARENT_COPY
-};
-
-enum omap_dma_write_mode {
-	OMAP_DMA_WRITE_NON_POSTED = 0,
-	OMAP_DMA_WRITE_POSTED,
-	OMAP_DMA_WRITE_LAST_NON_POSTED
-};
-
-enum omap_dma_channel_mode {
-	OMAP_DMA_LCH_2D = 0,
-	OMAP_DMA_LCH_G,
-	OMAP_DMA_LCH_P,
-	OMAP_DMA_LCH_PD
-};
-
-struct omap_dma_channel_params {
-	int data_type;		/* data type 8,16,32 */
-	int elem_count;		/* number of elements in a frame */
-	int frame_count;	/* number of frames in a element */
-
-	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int src_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long src_start;	/* source address : physical */
-	int src_ei;		/* source element index */
-	int src_fi;		/* source frame index */
-
-	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int dst_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long dst_start;	/* source address : physical */
-	int dst_ei;		/* source element index */
-	int dst_fi;		/* source frame index */
-
-	int trigger;		/* trigger attached if the channel is
-					synchronized */
-	int sync_mode;		/* sycn on element, frame , block or packet */
-	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
-
-	int ie;			/* interrupt enabled */
-
-	unsigned char read_prio;/* read priority */
-	unsigned char write_prio;/* write priority */
-
-#ifndef CONFIG_ARCH_OMAP1
-	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
-#endif
-};
-
-
-extern void omap_set_dma_priority(int lch, int dst_port, int priority);
-extern int omap_request_dma(int dev_id, const char *dev_name,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data, int *dma_ch);
-extern void omap_enable_dma_irq(int ch, u16 irq_bits);
-extern void omap_disable_dma_irq(int ch, u16 irq_bits);
-extern void omap_free_dma(int ch);
-extern void omap_start_dma(int lch);
-extern void omap_stop_dma(int lch);
-extern void omap_set_dma_transfer_params(int lch, int data_type,
-					 int elem_count, int frame_count,
-					 int sync_mode,
-					 int dma_trigger, int src_or_dst_synch);
-extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
-				    u32 color);
-extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
-extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
-
-extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-				    unsigned long src_start,
-				    int src_ei, int src_fi);
-extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_src_data_pack(int lch, int enable);
-extern void omap_set_dma_src_burst_mode(int lch,
-					enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-				     unsigned long dest_start,
-				     int dst_ei, int dst_fi);
-extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_dest_data_pack(int lch, int enable);
-extern void omap_set_dma_dest_burst_mode(int lch,
-					 enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_params(int lch,
-				struct omap_dma_channel_params *params);
-
-extern void omap_dma_link_lch(int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
-
-extern int omap_set_dma_callback(int lch,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data);
-extern dma_addr_t omap_get_dma_src_pos(int lch);
-extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern void omap_clear_dma(int lch);
-extern int omap_get_dma_active_status(int lch);
-extern int omap_dma_running(void);
-extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
-				       int tparams);
-extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-				 unsigned char write_prio);
-extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
-extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
-extern int omap_get_dma_index(int lch, int *ei, int *fi);
-
-/* Chaining APIs */
-#ifndef CONFIG_ARCH_OMAP1
-extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
-						    void *data),
-				  int *chain_id, int no_of_chans,
-				  int chain_mode,
-				  struct omap_dma_channel_params params);
-extern int omap_free_dma_chain(int chain_id);
-extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
-				     int dest_start, int elem_count,
-				     int frame_count, void *callbk_data);
-extern int omap_start_dma_chain_transfers(int chain_id);
-extern int omap_stop_dma_chain_transfers(int chain_id);
-extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
-extern int omap_get_dma_chain_dst_pos(int chain_id);
-extern int omap_get_dma_chain_src_pos(int chain_id);
-
-extern int omap_modify_dma_chain_params(int chain_id,
-					struct omap_dma_channel_params params);
-extern int omap_dma_chain_status(int chain_id);
-#endif
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
deleted file mode 100644
index 02b29e8437ae..000000000000
--- a/include/asm-arm/arch-omap/dmtimer.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/dmtimer.h
- *
- * OMAP Dual-Mode Timers
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * PWM and clock framwork support by Timo Teras.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_DMTIMER_H
-#define __ASM_ARCH_DMTIMER_H
-
-/* clock sources */
-#define OMAP_TIMER_SRC_SYS_CLK			0x00
-#define OMAP_TIMER_SRC_32_KHZ			0x01
-#define OMAP_TIMER_SRC_EXT_CLK			0x02
-
-/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
-#define OMAP_TIMER_INT_MATCH			(1 << 0)
-
-/* trigger types */
-#define OMAP_TIMER_TRIGGER_NONE			0x00
-#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
-#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
-
-struct omap_dm_timer;
-struct clk;
-
-int omap_dm_timer_init(void);
-
-struct omap_dm_timer *omap_dm_timer_request(void);
-struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-void omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_enable(struct omap_dm_timer *timer);
-void omap_dm_timer_disable(struct omap_dm_timer *timer);
-
-int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
-
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-
-void omap_dm_timer_trigger(struct omap_dm_timer *timer);
-void omap_dm_timer_start(struct omap_dm_timer *timer);
-void omap_dm_timer_stop(struct omap_dm_timer *timer);
-
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
-
-int omap_dm_timers_active(void);
-
-
-#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/include/asm-arm/arch-omap/dsp_common.h
deleted file mode 100644
index da97736f3efa..000000000000
--- a/include/asm-arm/arch-omap/dsp_common.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1)
- *
- * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved.
- *
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef ASM_ARCH_DSP_COMMON_H
-#define ASM_ARCH_DSP_COMMON_H
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
-extern void omap_dsp_request_mpui(void);
-extern void omap_dsp_release_mpui(void);
-extern int omap_dsp_request_mem(void);
-extern int omap_dsp_release_mem(void);
-#else
-static inline int omap_dsp_request_mem(void)
-{
-	return 0;
-}
-#define omap_dsp_release_mem()	do {} while (0)
-#endif
-
-#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/eac.h b/include/asm-arm/arch-omap/eac.h
deleted file mode 100644
index ccee3b0700b3..000000000000
--- a/include/asm-arm/arch-omap/eac.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK	0x100
-enum eac_mclk_src {
-	EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
-	EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
-	EAC_MCLK_EXT_12288000,
-	EAC_MCLK_EXT_2x11289600,
-	EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
-	EAC_CODEC_PCM,
-	EAC_CODEC_AC97,
-	EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
-	EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
-	/* if enabled, then first data slot (left channel) is signaled as
-	 * positive level of frame sync EAC.AC_FS */
-	unsigned	polarity_changed_mode:1;
-	/* if enabled, then serial data starts one clock cycle after the
-	 * of EAC.AC_FS for first audio slot */
-	unsigned	sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
-	enum eac_mclk_src	mclk_src;
-
-	enum eac_codec_mode	codec_mode;
-	union {
-		struct eac_i2s_conf	i2s;
-	} codec_conf;
-
-	int		default_rate; /* audio sampling rate */
-
-	int		(* set_power)(void *private_data, int dac, int adc);
-	int		(* register_controls)(void *private_data,
-					      struct snd_card *card);
-	const char 	*short_name;
-
-	void		*private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
-        int	(* init)(struct device *eac_dev);
-	void	(* cleanup)(struct device *eac_dev);
-	/* these callbacks are used to configure & control external MCLK
-	 * source. NULL if not used */
-	int	(* enable_ext_clocks)(struct device *eac_dev);
-	void	(* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
deleted file mode 100644
index 369093a45fcf..000000000000
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-arm/arch-omap/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/io.h>
-#include <asm/arch/irqs.h>
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ		INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#elif defined(CONFIG_ARCH_OMAP24XX)
-
-#include <asm/arch/omap24xx.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP2_VA_IC_BASE
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-2222:
-		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
-
-		.endm
-
-		.macro	irq_prio_table
-		.endm
-
-#endif
diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h
deleted file mode 100644
index f420881d2a3b..000000000000
--- a/include/asm-arm/arch-omap/fpga.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
-extern void omap1510_fpga_init_irq(void);
-#else
-#define omap1510_fpga_init_irq()	(0)
-#endif
-
-#define fpga_read(reg)			__raw_readb(reg)
-#define fpga_write(val, reg)		__raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000	/* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
-
-/* NOTE:  most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
-	/* offset 0x00 */
-	u16		smc91x[8];
-	/* offset 0x10 */
-	u16		fpga_rev;
-	u16		board_rev;
-	u16		gpio_outputs;
-	u16		leds;
-	/* offset 0x18 */
-	u16		misc_inputs;
-	u16		lan_status;
-	u16		lan_reset;
-	u16		reserved0;
-	/* offset 0x20 */
-	u16		ps2_data;
-	u16		ps2_ctrl;
-	/* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
-#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */
-#define OMAP1510_FPGA_SIZE			SZ_4K
-#define OMAP1510_FPGA_START			0x08000000	/* Physical */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE		0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
-#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
-#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
-#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpio-switch.h b/include/asm-arm/arch-omap/gpio-switch.h
deleted file mode 100644
index 10da0e07c0cf..000000000000
--- a/include/asm-arm/arch-omap/gpio-switch.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * GPIO switch definitions
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
-#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
-
-#include <linux/types.h>
-
-/* Cover:
- *	high -> closed
- *	low  -> open
- * Connection:
- *	high -> connected
- *	low  -> disconnected
- * Activity:
- *	high -> active
- *	low  -> inactive
- *
- */
-#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
-#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
-#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY		0x0002
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
-#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
-
-struct omap_gpio_switch {
-	const char *name;
-	s16 gpio;
-	unsigned flags:4;
-	unsigned type:4;
-
-	/* Time in ms to debounce when transitioning from
-	 * inactive state to active state. */
-	u16 debounce_rising;
-	/* Same for transition from active to inactive state. */
-	u16 debounce_falling;
-
-	/* notify board-specific code about state changes */
-	void (* notify)(void *data, int state);
-	void *notify_data;
-};
-
-/* Call at init time only */
-extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
-					int count);
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
deleted file mode 100644
index 5ee6a49864c3..000000000000
--- a/include/asm-arm/arch-omap/gpio.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
-
-#ifdef CONFIG_ARCH_OMAP730
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x02
-#define OMAP_MPUIO_IO_CNTL		0x04
-#define OMAP_MPUIO_KBR_LATCH		0x08
-#define OMAP_MPUIO_KBC			0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
-#define OMAP_MPUIO_KBD_INT		0x10
-#define OMAP_MPUIO_GPIO_INT		0x12
-#define OMAP_MPUIO_KBD_MASKIT		0x14
-#define OMAP_MPUIO_GPIO_MASKIT		0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
-#define OMAP_MPUIO_LATCH		0x1a
-#else
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x04
-#define OMAP_MPUIO_IO_CNTL		0x08
-#define OMAP_MPUIO_KBR_LATCH		0x10
-#define OMAP_MPUIO_KBC			0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
-#define OMAP_MPUIO_KBD_INT		0x20
-#define OMAP_MPUIO_GPIO_INT		0x24
-#define OMAP_MPUIO_KBD_MASKIT		0x28
-#define OMAP_MPUIO_GPIO_MASKIT		0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
-#define OMAP_MPUIO_LATCH		0x34
-#endif
-
-#define OMAP34XX_NR_GPIOS		6
-
-#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
-
-#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
-				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
-				 IH_GPIO_BASE + (nr))
-
-extern int omap_gpio_init(void);	/* Call from board init only */
-extern int omap_request_gpio(int gpio);
-extern void omap_free_gpio(int gpio);
-extern void omap_set_gpio_direction(int gpio, int is_input);
-extern void omap_set_gpio_dataout(int gpio, int enable);
-extern int omap_get_gpio_datain(int gpio);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- * *
- * The original OMAP-specfic calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
-		return OMAP_GPIO_IRQ(gpio);
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
-		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-	return irq - IH_GPIO_BASE;
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h
deleted file mode 100644
index 4eed1f80e2fb..000000000000
--- a/include/asm-arm/arch-omap/gpioexpander.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
-	return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
-	return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h
deleted file mode 100644
index 6a8e07ffc2d0..000000000000
--- a/include/asm-arm/arch-omap/gpmc.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * General-Purpose Memory Controller for OMAP2
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-#define GPMC_CS_CONFIG1		0x00
-#define GPMC_CS_CONFIG2		0x04
-#define GPMC_CS_CONFIG3		0x08
-#define GPMC_CS_CONFIG4		0x0c
-#define GPMC_CS_CONFIG5		0x10
-#define GPMC_CS_CONFIG6		0x14
-#define GPMC_CS_CONFIG7		0x18
-#define GPMC_CS_NAND_COMMAND	0x1c
-#define GPMC_CS_NAND_ADDRESS	0x20
-#define GPMC_CS_NAND_DATA	0x24
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
-#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
-#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
-
-/*
- * Note that all values in this struct are in nanoseconds, while
- * the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode */
-	u16 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u16 cs_on;		/* Assertion time */
-	u16 cs_rd_off;		/* Read deassertion time */
-	u16 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u16 adv_on;		/* Assertion time */
-	u16 adv_rd_off;		/* Read deassertion time */
-	u16 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u16 we_on;		/* WE assertion time */
-	u16 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u16 oe_on;		/* OE assertion time */
-	u16 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u16 page_burst_access;	/* Multiple access word delay */
-	u16 access;		/* Start-cycle to first data valid delay */
-	u16 rd_cycle;		/* Total read cycle time */
-	u16 wr_cycle;		/* Total write cycle time */
-};
-
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
-
-#endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
deleted file mode 100644
index 45fdfccbd5d4..000000000000
--- a/include/asm-arm/arch-omap/hardware.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *	 file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <asm/arch/cpu.h>
-#endif
-#include <asm/arch/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *	 files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
-#define MPU_TIMER_FREE		(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
-#define MPU_TIMER_AR		(1 << 1)
-#define MPU_TIMER_ST		(1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     (0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
-#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-
-#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET	0x00
-#define IRQ_MIR_REG_OFFSET	0x04
-#define IRQ_SIR_IRQ_REG_OFFSET	0x10
-#define IRQ_SIR_FIQ_REG_OFFSET	0x14
-#define IRQ_CONTROL_REG_OFFSET	0x18
-#define IRQ_ISR_REG_OFFSET	0x9c
-#define IRQ_ILR0_REG_OFFSET	0x1c
-#define IRQ_GMR_REG_OFFSET	0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE	0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE			(0xfffec900)
-#define MPUI_CTRL			(MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE			0xfffbd000
-#define OMAP_LPG2_BASE			0xfffbd800
-#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap24xx.h"
-#include "omap16xx.h"
-#include "omap34xx.h"
-
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
-#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/include/asm-arm/arch-omap/hwa742.h b/include/asm-arm/arch-omap/hwa742.h
deleted file mode 100644
index 577f492f2d3c..000000000000
--- a/include/asm-arm/arch-omap/hwa742.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _HWA742_H
-#define _HWA742_H
-
-struct hwa742_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
-	unsigned	te_connected:1;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
deleted file mode 100644
index 0b13557fd30b..000000000000
--- a/include/asm-arm/arch-omap/io.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from linux/include/asm-arm/arch-sa1100/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(a)		(a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#define PCIO_BASE	0
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#define IO_PHYS		0xFFFB0000
-#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
-#define IO_SIZE		0x40000
-#define IO_VIRT		(IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_p2v(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)	((va) + IO_OFFSET)
-
-#elif defined(CONFIG_ARCH_OMAP2)
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
-#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
-#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
-
-#ifdef CONFIG_ARCH_OMAP2430
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
-#define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
-#define OMAP243X_GPMC_SIZE	SZ_1M
-#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
-#define OMAP243X_SDRC_SIZE	SZ_1M
-#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
-#define OMAP243X_SMS_SIZE	SZ_1M
-
-#endif
-
-#define IO_OFFSET	0x90000000
-#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_24XX_VIRT	0xe0000000
-#define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_24XX_VIRT	0xe1000000
-#define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT	0xe2000000
-#define DSP_MMU_24XX_SIZE	SZ_4K
-
-#elif defined(CONFIG_ARCH_OMAP3)
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
-#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
-#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
-#define L4_WK_34XX_SIZE		SZ_1M
-
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
-#define L4_PER_34XX_SIZE	SZ_1M
-
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
-
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
-#define OMAP34XX_GPMC_SIZE	SZ_1M
-
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
-#define OMAP343X_SMS_SIZE	SZ_1M
-
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
-#define OMAP343X_SDRC_SIZE	SZ_1M
-
-
-#define IO_OFFSET		0x90000000
-#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
-/* DSP */
-#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_34XX_VIRT	0xe0000000
-#define DSP_MEM_34XX_SIZE	0x28000
-#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_34XX_VIRT	0xe1000000
-#define DSP_IPI_34XX_SIZE	SZ_4K
-#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT	0xe2000000
-#define DSP_MMU_34XX_SIZE	SZ_4K
-
-#endif
-
-#ifndef __ASSEMBLER__
-
-/*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
-#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
-
-#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
-
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
-
-extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/irda.h b/include/asm-arm/arch-omap/irda.h
deleted file mode 100644
index 96bb12fab438..000000000000
--- a/include/asm-arm/arch-omap/irda.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/irda.h
- *
- *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_SEL		1	/* Selects IrDA */
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-#define IR_MIRMODE	8
-
-struct omap_irda_config {
-	int transceiver_cap;
-	int (*transceiver_mode)(struct device *dev, int mode);
-	int (*select_irda)(struct device *dev, int state);
-	/* Very specific to the needs of some platforms (h3,h4)
-	 * having calls which can sleep in irda_set_speed.
-	 */
-	struct delayed_work gpio_expa;
-	int rx_channel;
-	int tx_channel;
-	unsigned long dest_start;
-	unsigned long src_start;
-	int tx_trigger;
-	int rx_trigger;
-	int mode;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
deleted file mode 100644
index 7464c694859b..000000000000
--- a/include/asm-arm/arch-omap/irqs.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *	 are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_DMA_LCD		25
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ	0
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
- */
-#define INT_730_IH2_FIQ		0
-#define INT_730_IH2_IRQ		1
-#define INT_730_USB_NON_ISO	2
-#define INT_730_USB_ISO		3
-#define INT_730_ICR		4
-#define INT_730_EAC		5
-#define INT_730_GPIO_BANK1	6
-#define INT_730_GPIO_BANK2	7
-#define INT_730_GPIO_BANK3	8
-#define INT_730_McBSP2TX	10
-#define INT_730_McBSP2RX	11
-#define INT_730_McBSP2RX_OVF	12
-#define INT_730_LCD_LINE	14
-#define INT_730_GSM_PROTECT	15
-#define INT_730_TIMER3		16
-#define INT_730_GPIO_BANK5	17
-#define INT_730_GPIO_BANK6	18
-#define INT_730_SPGIO_WR	29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE		32
-
-#define INT_KEYBOARD		(1 + IH2_BASE)
-#define INT_uWireTX		(2 + IH2_BASE)
-#define INT_uWireRX		(3 + IH2_BASE)
-#define INT_I2C			(4 + IH2_BASE)
-#define INT_MPUIO		(5 + IH2_BASE)
-#define INT_USB_HHC_1		(6 + IH2_BASE)
-#define INT_McBSP3TX		(10 + IH2_BASE)
-#define INT_McBSP3RX		(11 + IH2_BASE)
-#define INT_McBSP1TX		(12 + IH2_BASE)
-#define INT_McBSP1RX		(13 + IH2_BASE)
-#define INT_UART1		(14 + IH2_BASE)
-#define INT_UART2		(15 + IH2_BASE)
-#define INT_BT_MCSI1TX		(16 + IH2_BASE)
-#define INT_BT_MCSI1RX		(17 + IH2_BASE)
-#define INT_USB_W2FC		(20 + IH2_BASE)
-#define INT_1WIRE		(21 + IH2_BASE)
-#define INT_OS_TIMER		(22 + IH2_BASE)
-#define INT_MMC			(23 + IH2_BASE)
-#define INT_GAUGE_32K		(24 + IH2_BASE)
-#define INT_RTC_TIMER		(25 + IH2_BASE)
-#define INT_RTC_ALARM		(26 + IH2_BASE)
-#define INT_MEM_STICK		(27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU	(28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC		(0 + IH2_BASE)
-#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
-#define INT_1610_USB_OTG	(8 + IH2_BASE)
-#define INT_1610_SoSSI		(9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
-#define INT_1610_DSP_MMU	(28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
-#define INT_1610_STI		(32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
-#define INT_1610_GPTIMER3	(34 + IH2_BASE)
-#define INT_1610_GPTIMER4	(35 + IH2_BASE)
-#define INT_1610_GPTIMER5	(36 + IH2_BASE)
-#define INT_1610_GPTIMER6	(37 + IH2_BASE)
-#define INT_1610_GPTIMER7	(38 + IH2_BASE)
-#define INT_1610_GPTIMER8	(39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
-#define INT_1610_MMC2		(42 + IH2_BASE)
-#define INT_1610_CF		(43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
-#define INT_1610_SPI		(49 + IH2_BASE)
-#define INT_1610_DMA_CH6	(53 + IH2_BASE)
-#define INT_1610_DMA_CH7	(54 + IH2_BASE)
-#define INT_1610_DMA_CH8	(55 + IH2_BASE)
-#define INT_1610_DMA_CH9	(56 + IH2_BASE)
-#define INT_1610_DMA_CH10	(57 + IH2_BASE)
-#define INT_1610_DMA_CH11	(58 + IH2_BASE)
-#define INT_1610_DMA_CH12	(59 + IH2_BASE)
-#define INT_1610_DMA_CH13	(60 + IH2_BASE)
-#define INT_1610_DMA_CH14	(61 + IH2_BASE)
-#define INT_1610_DMA_CH15	(62 + IH2_BASE)
-#define INT_1610_NAND		(63 + IH2_BASE)
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
- */
-#define INT_730_HW_ERRORS	(0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_730_CFCD		(2 + IH2_BASE)
-#define INT_730_CFIREQ		(3 + IH2_BASE)
-#define INT_730_I2C		(4 + IH2_BASE)
-#define INT_730_PCC		(5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_730_SPI_100K_1	(7 + IH2_BASE)
-#define INT_730_SYREN_SPI	(8 + IH2_BASE)
-#define INT_730_VLYNQ		(9 + IH2_BASE)
-#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_730_McBSP1TX	(11 + IH2_BASE)
-#define INT_730_McBSP1RX	(12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_730_MCSI		(16 + IH2_BASE)
-#define INT_730_uWireTX		(17 + IH2_BASE)
-#define INT_730_uWireRX		(18 + IH2_BASE)
-#define INT_730_SMC_CD		(19 + IH2_BASE)
-#define INT_730_SMC_IREQ	(20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_730_TIMER32K	(22 + IH2_BASE)
-#define INT_730_MMC_SDIO	(23 + IH2_BASE)
-#define INT_730_UPLD		(24 + IH2_BASE)
-#define INT_730_USB_HHC_1	(27 + IH2_BASE)
-#define INT_730_USB_HHC_2	(28 + IH2_BASE)
-#define INT_730_USB_GENI	(29 + IH2_BASE)
-#define INT_730_USB_OTG		(30 + IH2_BASE)
-#define INT_730_CAMERA_IF	(31 + IH2_BASE)
-#define INT_730_RNG		(32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_730_SHA1_MD5	(36 + IH2_BASE)
-#define INT_730_SPI_100K_2	(37 + IH2_BASE)
-#define INT_730_RNG_IDLE	(38 + IH2_BASE)
-#define INT_730_MPUIO		(39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_730_DMA_CH6		(53 + IH2_BASE)
-#define INT_730_DMA_CH7		(54 + IH2_BASE)
-#define INT_730_DMA_CH8		(55 + IH2_BASE)
-#define INT_730_DMA_CH9		(56 + IH2_BASE)
-#define INT_730_DMA_CH10	(57 + IH2_BASE)
-#define INT_730_DMA_CH11	(58 + IH2_BASE)
-#define INT_730_DMA_CH12	(59 + IH2_BASE)
-#define INT_730_DMA_CH13	(60 + IH2_BASE)
-#define INT_730_DMA_CH14	(61 + IH2_BASE)
-#define INT_730_DMA_CH15	(62 + IH2_BASE)
-#define INT_730_NAND		(63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ	7
-#define INT_24XX_SDMA_IRQ0	12
-#define INT_24XX_SDMA_IRQ1	13
-#define INT_24XX_SDMA_IRQ2	14
-#define INT_24XX_SDMA_IRQ3	15
-#define INT_24XX_CAM_IRQ	24
-#define INT_24XX_DSS_IRQ	25
-#define INT_24XX_MAIL_U0_MPU	26
-#define INT_24XX_DSP_UMA	27
-#define INT_24XX_DSP_MMU	28
-#define INT_24XX_GPIO_BANK1	29
-#define INT_24XX_GPIO_BANK2	30
-#define INT_24XX_GPIO_BANK3	31
-#define INT_24XX_GPIO_BANK4	32
-#define INT_24XX_GPIO_BANK5	33
-#define INT_24XX_MAIL_U3_MPU	34
-#define INT_24XX_GPTIMER1	37
-#define INT_24XX_GPTIMER2	38
-#define INT_24XX_GPTIMER3	39
-#define INT_24XX_GPTIMER4	40
-#define INT_24XX_GPTIMER5	41
-#define INT_24XX_GPTIMER6	42
-#define INT_24XX_GPTIMER7	43
-#define INT_24XX_GPTIMER8	44
-#define INT_24XX_GPTIMER9	45
-#define INT_24XX_GPTIMER10	46
-#define INT_24XX_GPTIMER11	47
-#define INT_24XX_GPTIMER12	48
-#define INT_24XX_I2C1_IRQ	56
-#define INT_24XX_I2C2_IRQ	57
-#define INT_24XX_MCBSP1_IRQ_TX	59
-#define INT_24XX_MCBSP1_IRQ_RX	60
-#define INT_24XX_MCBSP2_IRQ_TX	62
-#define INT_24XX_MCBSP2_IRQ_RX	63
-#define INT_24XX_UART1_IRQ	72
-#define INT_24XX_UART2_IRQ	73
-#define INT_24XX_UART3_IRQ	74
-#define INT_24XX_USB_IRQ_GEN	75
-#define INT_24XX_USB_IRQ_NISO	76
-#define INT_24XX_USB_IRQ_ISO	77
-#define INT_24XX_USB_IRQ_HGEN	78
-#define INT_24XX_USB_IRQ_HSOF	79
-#define INT_24XX_USB_IRQ_OTG	80
-#define INT_24XX_MMC_IRQ	83
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES	192
-#define IH_GPIO_BASE		(128 + IH2_BASE)
-#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef	CONFIG_TWL4030_CORE
-#define	TWL4030_BASE_NR_IRQS	8
-#define	TWL4030_PWR_NR_IRQS	8
-#else
-#define	TWL4030_BASE_NR_IRQS	0
-#define	TWL4030_PWR_NR_IRQS	0
-#endif
-#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
-#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
-#ifdef	CONFIG_TWL4030_GPIO
-#define TWL4030_GPIO_NR_IRQS	18
-#else
-#define	TWL4030_GPIO_NR_IRQS	0
-#endif
-#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#define NR_IRQS			TWL4030_GPIO_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#ifndef __ASSEMBLY__
-extern void omap_init_irq(void);
-#endif
-
-#include <asm/hardware.h>
-
-#endif
diff --git a/include/asm-arm/arch-omap/keypad.h b/include/asm-arm/arch-omap/keypad.h
deleted file mode 100644
index b7f83075436e..000000000000
--- a/include/asm-arm/arch-omap/keypad.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/keypad.h
- *
- *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-struct omap_kp_platform_data {
-	int rows;
-	int cols;
-	int *keymap;
-	unsigned int keymapsize;
-	unsigned int rep:1;
-	unsigned long delay;
-	unsigned int dbounce:1;
-	/* specific to OMAP242x*/
-	unsigned int *row_gpios;
-	unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. */
-#define GROUP_0		(0 << 16)
-#define GROUP_1		(1 << 16)
-#define GROUP_2		(2 << 16)
-#define GROUP_3		(3 << 16)
-#define GROUP_MASK	GROUP_3
-
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-
-#endif
-
diff --git a/include/asm-arm/arch-omap/lcd_mipid.h b/include/asm-arm/arch-omap/lcd_mipid.h
deleted file mode 100644
index f8fbc4801e52..000000000000
--- a/include/asm-arm/arch-omap/lcd_mipid.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __LCD_MIPID_H
-#define __LCD_MIPID_H
-
-enum mipid_test_num {
-	MIPID_TEST_RGB_LINES,
-};
-
-enum mipid_test_result {
-	MIPID_TEST_SUCCESS,
-	MIPID_TEST_INVALID,
-	MIPID_TEST_FAILED,
-};
-
-#ifdef __KERNEL__
-
-struct mipid_platform_data {
-	int	nreset_gpio;
-	int	data_lines;
-	void	(*shutdown)(struct mipid_platform_data *pdata);
-};
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/led.h b/include/asm-arm/arch-omap/led.h
deleted file mode 100644
index f3acae28e2da..000000000000
--- a/include/asm-arm/arch-omap/led.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/led.h
- *
- *  Copyright (C) 2006 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_LED_H
-#define ASMARM_ARCH_LED_H
-
-struct omap_led_config {
-	struct led_classdev	cdev;
-	s16			gpio;
-};
-
-struct omap_led_platform_data {
-	s16			nr_leds;
-	struct omap_led_config	*leds;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/mailbox.h b/include/asm-arm/arch-omap/mailbox.h
deleted file mode 100644
index 7cbed9332e16..000000000000
--- a/include/asm-arm/arch-omap/mailbox.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* mailbox.h */
-
-#ifndef MAILBOX_H
-#define MAILBOX_H
-
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-#include <linux/blkdev.h>
-
-typedef u32 mbox_msg_t;
-typedef void (mbox_receiver_t)(mbox_msg_t msg);
-struct omap_mbox;
-
-typedef int __bitwise omap_mbox_irq_t;
-#define IRQ_TX ((__force omap_mbox_irq_t) 1)
-#define IRQ_RX ((__force omap_mbox_irq_t) 2)
-
-typedef int __bitwise omap_mbox_type_t;
-#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
-#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
-
-struct omap_mbox_ops {
-	omap_mbox_type_t	type;
-	int		(*startup)(struct omap_mbox *mbox);
-	void		(*shutdown)(struct omap_mbox *mbox);
-	/* fifo */
-	mbox_msg_t	(*fifo_read)(struct omap_mbox *mbox);
-	void		(*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
-	int		(*fifo_empty)(struct omap_mbox *mbox);
-	int		(*fifo_full)(struct omap_mbox *mbox);
-	/* irq */
-	void		(*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-};
-
-struct omap_mbox_queue {
-	spinlock_t		lock;
-	struct request_queue	*queue;
-	struct work_struct	work;
-	int	(*callback)(void *);
-	struct omap_mbox	*mbox;
-};
-
-struct omap_mbox {
-	char			*name;
-	unsigned int		irq;
-
-	struct omap_mbox_queue	*txq, *rxq;
-
-	struct omap_mbox_ops	*ops;
-
-	mbox_msg_t		seq_snd, seq_rcv;
-
-	struct device		dev;
-
-	struct omap_mbox	*next;
-	void			*priv;
-
-	void			(*err_notify)(void);
-};
-
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
-void omap_mbox_init_seq(struct omap_mbox *);
-
-struct omap_mbox *omap_mbox_get(const char *);
-void omap_mbox_put(struct omap_mbox *);
-
-int omap_mbox_register(struct omap_mbox *);
-int omap_mbox_unregister(struct omap_mbox *);
-
-#endif /* MAILBOX_H */
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
deleted file mode 100644
index 26c78f67dc8e..000000000000
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware.h>
-#include <asm/arch/clock.h>
-
-#define OMAP730_MCBSP1_BASE	0xfffb1000
-#define OMAP730_MCBSP2_BASE	0xfffb1800
-
-#define OMAP1510_MCBSP1_BASE	0xe1011800
-#define OMAP1510_MCBSP2_BASE	0xfffb1000
-#define OMAP1510_MCBSP3_BASE	0xe1017000
-
-#define OMAP1610_MCBSP1_BASE	0xe1011800
-#define OMAP1610_MCBSP2_BASE	0xfffb1000
-#define OMAP1610_MCBSP3_BASE	0xe1017000
-
-#define OMAP24XX_MCBSP1_BASE	0x48074000
-#define OMAP24XX_MCBSP2_BASE	0x48076000
-
-#define OMAP34XX_MCBSP1_BASE	0x48074000
-#define OMAP34XX_MCBSP2_BASE	0x49022000
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
-
-#define OMAP_MCBSP_REG_DRR2	0x00
-#define OMAP_MCBSP_REG_DRR1	0x02
-#define OMAP_MCBSP_REG_DXR2	0x04
-#define OMAP_MCBSP_REG_DXR1	0x06
-#define OMAP_MCBSP_REG_SPCR2	0x08
-#define OMAP_MCBSP_REG_SPCR1	0x0a
-#define OMAP_MCBSP_REG_RCR2	0x0c
-#define OMAP_MCBSP_REG_RCR1	0x0e
-#define OMAP_MCBSP_REG_XCR2	0x10
-#define OMAP_MCBSP_REG_XCR1	0x12
-#define OMAP_MCBSP_REG_SRGR2	0x14
-#define OMAP_MCBSP_REG_SRGR1	0x16
-#define OMAP_MCBSP_REG_MCR2	0x18
-#define OMAP_MCBSP_REG_MCR1	0x1a
-#define OMAP_MCBSP_REG_RCERA	0x1c
-#define OMAP_MCBSP_REG_RCERB	0x1e
-#define OMAP_MCBSP_REG_XCERA	0x20
-#define OMAP_MCBSP_REG_XCERB	0x22
-#define OMAP_MCBSP_REG_PCR0	0x24
-#define OMAP_MCBSP_REG_RCERC	0x26
-#define OMAP_MCBSP_REG_RCERD	0x28
-#define OMAP_MCBSP_REG_XCERC	0x2A
-#define OMAP_MCBSP_REG_XCERD	0x2C
-#define OMAP_MCBSP_REG_RCERE	0x2E
-#define OMAP_MCBSP_REG_RCERF	0x30
-#define OMAP_MCBSP_REG_XCERE	0x32
-#define OMAP_MCBSP_REG_XCERF	0x34
-#define OMAP_MCBSP_REG_RCERG	0x36
-#define OMAP_MCBSP_REG_RCERH	0x38
-#define OMAP_MCBSP_REG_XCERG	0x3A
-#define OMAP_MCBSP_REG_XCERH	0x3C
-
-#define OMAP_MAX_MCBSP_COUNT	3
-#define MAX_MCBSP_CLOCKS	3
-
-#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP1
-#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
-#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
-
-#elif defined(CONFIG_ARCH_OMAP24XX)
-
-#define OMAP_MCBSP_REG_DRR2	0x00
-#define OMAP_MCBSP_REG_DRR1	0x04
-#define OMAP_MCBSP_REG_DXR2	0x08
-#define OMAP_MCBSP_REG_DXR1	0x0C
-#define OMAP_MCBSP_REG_SPCR2	0x10
-#define OMAP_MCBSP_REG_SPCR1	0x14
-#define OMAP_MCBSP_REG_RCR2	0x18
-#define OMAP_MCBSP_REG_RCR1	0x1C
-#define OMAP_MCBSP_REG_XCR2	0x20
-#define OMAP_MCBSP_REG_XCR1	0x24
-#define OMAP_MCBSP_REG_SRGR2	0x28
-#define OMAP_MCBSP_REG_SRGR1	0x2C
-#define OMAP_MCBSP_REG_MCR2	0x30
-#define OMAP_MCBSP_REG_MCR1	0x34
-#define OMAP_MCBSP_REG_RCERA	0x38
-#define OMAP_MCBSP_REG_RCERB	0x3C
-#define OMAP_MCBSP_REG_XCERA	0x40
-#define OMAP_MCBSP_REG_XCERB	0x44
-#define OMAP_MCBSP_REG_PCR0	0x48
-#define OMAP_MCBSP_REG_RCERC	0x4C
-#define OMAP_MCBSP_REG_RCERD	0x50
-#define OMAP_MCBSP_REG_XCERC	0x54
-#define OMAP_MCBSP_REG_XCERD	0x58
-#define OMAP_MCBSP_REG_RCERE	0x5C
-#define OMAP_MCBSP_REG_RCERF	0x60
-#define OMAP_MCBSP_REG_XCERE	0x64
-#define OMAP_MCBSP_REG_XCERF	0x68
-#define OMAP_MCBSP_REG_RCERG	0x6C
-#define OMAP_MCBSP_REG_RCERH	0x70
-#define OMAP_MCBSP_REG_XCERG	0x74
-#define OMAP_MCBSP_REG_XCERH	0x78
-
-#define OMAP_MAX_MCBSP_COUNT	2
-#define MAX_MCBSP_CLOCKS	2
-
-#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP2
-#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
-#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
-
-#endif
-
-#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
-
-
-/************************** McBSP SPCR1 bit definitions ***********************/
-#define RRST			0x0001
-#define RRDY			0x0002
-#define RFULL			0x0004
-#define RSYNC_ERR		0x0008
-#define RINTM(value)		((value)<<4)	/* bits 4:5 */
-#define ABIS			0x0040
-#define DXENA			0x0080
-#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
-#define RJUST(value)		((value)<<13)	/* bits 13:14 */
-#define DLB			0x8000
-
-/************************** McBSP SPCR2 bit definitions ***********************/
-#define XRST		0x0001
-#define XRDY		0x0002
-#define XEMPTY		0x0004
-#define XSYNC_ERR	0x0008
-#define XINTM(value)	((value)<<4)		/* bits 4:5 */
-#define GRST		0x0040
-#define FRST		0x0080
-#define SOFT		0x0100
-#define FREE		0x0200
-
-/************************** McBSP PCR bit definitions *************************/
-#define CLKRP		0x0001
-#define CLKXP		0x0002
-#define FSRP		0x0004
-#define FSXP		0x0008
-#define DR_STAT		0x0010
-#define DX_STAT		0x0020
-#define CLKS_STAT	0x0040
-#define SCLKME		0x0080
-#define CLKRM		0x0100
-#define CLKXM		0x0200
-#define FSRM		0x0400
-#define FSXM		0x0800
-#define RIOEN		0x1000
-#define XIOEN		0x2000
-#define IDLE_EN		0x4000
-
-/************************** McBSP RCR1 bit definitions ************************/
-#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
-#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
-
-/************************** McBSP XCR1 bit definitions ************************/
-#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
-#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
-
-/*************************** McBSP RCR2 bit definitions ***********************/
-#define RDATDLY(value)		(value)		/* Bits 0:1 */
-#define RFIG			0x0004
-#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
-#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
-#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
-#define RPHASE			0x8000
-
-/*************************** McBSP XCR2 bit definitions ***********************/
-#define XDATDLY(value)		(value)		/* Bits 0:1 */
-#define XFIG			0x0004
-#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
-#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
-#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
-#define XPHASE			0x8000
-
-/************************* McBSP SRGR1 bit definitions ************************/
-#define CLKGDV(value)		(value)		/* Bits 0:7 */
-#define FWID(value)		((value)<<8)	/* Bits 8:15 */
-
-/************************* McBSP SRGR2 bit definitions ************************/
-#define FPER(value)		(value)		/* Bits 0:11 */
-#define FSGM			0x1000
-#define CLKSM			0x2000
-#define CLKSP			0x4000
-#define GSYNC			0x8000
-
-/************************* McBSP MCR1 bit definitions *************************/
-#define RMCM			0x0001
-#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
-#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
-#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
-
-/************************* McBSP MCR2 bit definitions *************************/
-#define XMCM(value)		(value)		/* Bits 0:1 */
-#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
-#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
-#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
-
-
-/* we don't do multichannel for now */
-struct omap_mcbsp_reg_cfg {
-	u16 spcr2;
-	u16 spcr1;
-	u16 rcr2;
-	u16 rcr1;
-	u16 xcr2;
-	u16 xcr1;
-	u16 srgr2;
-	u16 srgr1;
-	u16 mcr2;
-	u16 mcr1;
-	u16 pcr0;
-	u16 rcerc;
-	u16 rcerd;
-	u16 xcerc;
-	u16 xcerd;
-	u16 rcere;
-	u16 rcerf;
-	u16 xcere;
-	u16 xcerf;
-	u16 rcerg;
-	u16 rcerh;
-	u16 xcerg;
-	u16 xcerh;
-};
-
-typedef enum {
-	OMAP_MCBSP1 = 0,
-	OMAP_MCBSP2,
-	OMAP_MCBSP3,
-} omap_mcbsp_id;
-
-typedef int __bitwise omap_mcbsp_io_type_t;
-#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
-#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
-
-typedef enum {
-	OMAP_MCBSP_WORD_8 = 0,
-	OMAP_MCBSP_WORD_12,
-	OMAP_MCBSP_WORD_16,
-	OMAP_MCBSP_WORD_20,
-	OMAP_MCBSP_WORD_24,
-	OMAP_MCBSP_WORD_32,
-} omap_mcbsp_word_length;
-
-typedef enum {
-	OMAP_MCBSP_CLK_RISING = 0,
-	OMAP_MCBSP_CLK_FALLING,
-} omap_mcbsp_clk_polarity;
-
-typedef enum {
-	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
-	OMAP_MCBSP_FS_ACTIVE_LOW,
-} omap_mcbsp_fs_polarity;
-
-typedef enum {
-	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
-	OMAP_MCBSP_CLK_STP_MODE_DELAY,
-} omap_mcbsp_clk_stp_mode;
-
-
-/******* SPI specific mode **********/
-typedef enum {
-	OMAP_MCBSP_SPI_MASTER = 0,
-	OMAP_MCBSP_SPI_SLAVE,
-} omap_mcbsp_spi_mode;
-
-struct omap_mcbsp_spi_cfg {
-	omap_mcbsp_spi_mode		spi_mode;
-	omap_mcbsp_clk_polarity		rx_clock_polarity;
-	omap_mcbsp_clk_polarity		tx_clock_polarity;
-	omap_mcbsp_fs_polarity		fsx_polarity;
-	u8				clk_div;
-	omap_mcbsp_clk_stp_mode		clk_stp_mode;
-	omap_mcbsp_word_length		word_length;
-};
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
-	void (*request)(unsigned int);
-	void (*free)(unsigned int);
-	int (*check)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
-	u32 virt_base;
-	u8 dma_rx_sync, dma_tx_sync;
-	u16 rx_irq, tx_irq;
-	struct omap_mcbsp_ops *ops;
-	char const *clk_name;
-};
-
-struct omap_mcbsp {
-	struct device *dev;
-	u32 io_base;
-	u8 id;
-	u8 free;
-	omap_mcbsp_word_length rx_word_length;
-	omap_mcbsp_word_length tx_word_length;
-
-	omap_mcbsp_io_type_t io_type; /* IRQ or poll */
-	/* IRQ based TX/RX */
-	int rx_irq;
-	int tx_irq;
-
-	/* DMA stuff */
-	u8 dma_rx_sync;
-	short dma_rx_lch;
-	u8 dma_tx_sync;
-	short dma_tx_lch;
-
-	/* Completion queues */
-	struct completion tx_irq_completion;
-	struct completion rx_irq_completion;
-	struct completion tx_dma_completion;
-	struct completion rx_dma_completion;
-
-	/* Protect the field .free, while checking if the mcbsp is in use */
-	spinlock_t lock;
-	struct omap_mcbsp_platform_data *pdata;
-	struct clk *clk;
-};
-
-int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
-					int size);
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-int omap_mcbsp_request(unsigned int id);
-void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
-void omap_mcbsp_xmit_word(unsigned int id, u32 word);
-u32 omap_mcbsp_recv_word(unsigned int id);
-
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
-
-
-/* SPI specific API */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
-
-/* Polled read/write functions */
-int omap_mcbsp_pollread(unsigned int id, u16 * buf);
-int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
-
-#endif
diff --git a/include/asm-arm/arch-omap/mcspi.h b/include/asm-arm/arch-omap/mcspi.h
deleted file mode 100644
index 1254e4945b6f..000000000000
--- a/include/asm-arm/arch-omap/mcspi.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _OMAP2_MCSPI_H
-#define _OMAP2_MCSPI_H
-
-struct omap2_mcspi_platform_config {
-	unsigned short	num_cs;
-};
-
-struct omap2_mcspi_device_config {
-	unsigned turbo_mode:1;
-
-	/* Do we want one channel enabled at the same time? */
-	unsigned single_channel:1;
-};
-
-#endif
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
deleted file mode 100644
index 14cba97c18ad..000000000000
--- a/include/asm-arm/arch-omap/memory.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
-#define PHYS_OFFSET		UL(0x80000000)
-#endif
-
-/*
- * Conversion between SDRAM and fake PCI bus, used by USB
- * NOTE: Physical address must be converted to Local Bus address
- *	 on OMAP-1510 only
- */
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- */
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
-
-#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
-					(dma_addr_t)virt_to_lbus(page_address(page)) : \
-					(dma_addr_t)__virt_to_bus(page_address(page));})
-
-#define __arch_dma_to_virt(dev, addr)	({is_lbus_device(dev) ? \
-					lbus_to_virt(addr) : \
-					__bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr)	({is_lbus_device(dev) ? \
-					virt_to_lbus(addr) : \
-					__virt_to_bus(addr);})
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
-	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h
deleted file mode 100644
index 69ed7ee40179..000000000000
--- a/include/asm-arm/arch-omap/menelaus.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/menelaus.h
- *
- * Functions to access Menelaus power management chip
- */
-
-#ifndef __ASM_ARCH_MENELAUS_H
-#define __ASM_ARCH_MENELAUS_H
-
-struct device;
-
-struct menelaus_platform_data {
-	int (* late_init)(struct device *dev);
-};
-
-extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
-					  void *data);
-extern void menelaus_unregister_mmc_callback(void);
-extern int menelaus_set_mmc_opendrain(int slot, int enable);
-extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
-
-extern int menelaus_set_vmem(unsigned int mV);
-extern int menelaus_set_vio(unsigned int mV);
-extern int menelaus_set_vmmc(unsigned int mV);
-extern int menelaus_set_vaux(unsigned int mV);
-extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
-extern int menelaus_set_slot_sel(int enable);
-extern int menelaus_get_slot_pin_states(void);
-extern int menelaus_set_vcore_sw(unsigned int mV);
-extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
-
-#define EN_VPLL_SLEEP	(1 << 7)
-#define EN_VMMC_SLEEP	(1 << 6)
-#define EN_VAUX_SLEEP	(1 << 5)
-#define EN_VIO_SLEEP	(1 << 4)
-#define EN_VMEM_SLEEP	(1 << 3)
-#define EN_DC3_SLEEP	(1 << 2)
-#define EN_DC2_SLEEP	(1 << 1)
-#define EN_VC_SLEEP	(1 << 0)
-
-extern int menelaus_set_regulator_sleep(int enable, u32 val);
-
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
-#define omap_has_menelaus()	1
-#else
-#define omap_has_menelaus()	0
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
deleted file mode 100644
index 7cfc5f258560..000000000000
--- a/include/asm-arm/arch-omap/mmc.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <asm/arch/board.h>
-
-#define OMAP_MMC_MAX_SLOTS	2
-
-struct omap_mmc_platform_data {
-	struct omap_mmc_conf	conf;
-
-	/* number of slots on board */
-	unsigned nr_slots:2;
-
-	/* set if your board has components or wiring that limits the
-	 * maximum frequency on the MMC bus */
-	unsigned int max_freq;
-
-	/* switch the bus to a new slot */
-	int (* switch_slot)(struct device *dev, int slot);
-	/* initialize board-specific MMC functionality, can be NULL if
-	 * not supported */
-	int (* init)(struct device *dev);
-	void (* cleanup)(struct device *dev);
-	void (* shutdown)(struct device *dev);
-
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev, int slot);
-	int (*resume)(struct device *dev, int slot);
-
-	struct omap_mmc_slot_data {
-		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
-		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
-		int (* get_ro)(struct device *dev, int slot);
-
-		/* return MMC cover switch state, can be NULL if not supported.
-		 *
-		 * possible return values:
-		 *   0 - open
-		 *   1 - closed
-		 */
-		int (* get_cover_state)(struct device *dev, int slot);
-
-		const char *name;
-		u32 ocr_mask;
-
-		/* Card detection IRQs */
-		int card_detect_irq;
-		int (* card_detect)(int irq);
-
-		unsigned int ban_openended:1;
-
-	} slots[OMAP_MMC_MAX_SLOTS];
-};
-
-extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
-
-#endif
diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h
deleted file mode 100644
index a73a28571fee..000000000000
--- a/include/asm-arm/arch-omap/mtd-xip.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions.
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
- *
- * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#ifndef __ARCH_OMAP_MTD_XIP_H__
-#define __ARCH_OMAP_MTD_XIP_H__
-
-#include <asm/hardware.h>
-#define OMAP_MPU_TIMER_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER_OFFSET	0x100
-
-typedef struct {
-	u32 cntl;			/* CNTL_TIMER, R/W */
-	u32 load_tim;			/* LOAD_TIM,   W */
-	u32 read_tim;			/* READ_TIM,   R */
-} xip_omap_mpu_timer_regs_t;
-
-#define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
-	(n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long xip_omap_mpu_timer_read(int nr)
-{
-	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
-	return timer->read_tim;
-}
-
-#define xip_irqpending()	\
-	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
-#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
-
-/*
- * It's permitted to do approxmation for xip_elapsed_since macro
- * (see linux/mtd/xip.h)
- */
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
-
-#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
deleted file mode 100644
index ff9a5b5575fd..000000000000
--- a/include/asm-arm/arch-omap/mux.h
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- *	 For example, W8_1610_MMC2_DAT0, where:
- *	 - W8	     = ball
- *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
- *	 - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
-					.mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
-					.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
-					.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
-					.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
-		pull_reg, pull_bit, pull_status,	\
-		pu_pd_reg, pu_pd_status, debug_status)	\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG(mux_reg, mode_offset, mode)		\
-	PULL_REG(pull_reg, pull_bit, pull_status)	\
-	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
-},
-
-
-/*
- * OMAP730 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
- *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- *   as mux config
- */
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_730(mux_reg, mode_offset, mode)		\
-	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-#define MUX_CFG_24XX(desc, reg_offset, mode,			\
-				pull_en, pull_mode, dbg)	\
-{								\
-	.name		= desc,					\
-	.debug		= dbg,					\
-	.mux_reg	= reg_offset,				\
-	.mask		= mode,					\
-	.pull_val	= pull_en,				\
-	.pu_pd_val	= pull_mode,				\
-},
-
-
-#define PULL_DISABLED	0
-#define PULL_ENABLED	1
-
-#define PULL_DOWN	0
-#define PULL_UP		1
-
-struct pin_config {
-	char *name;
-	unsigned char busy;
-	unsigned char debug;
-
-	const char *mux_reg_name;
-	const unsigned int mux_reg;
-	const unsigned char mask_offset;
-	const unsigned char mask;
-
-	const char *pull_name;
-	const unsigned int pull_reg;
-	const unsigned char pull_val;
-	const unsigned char pull_bit;
-
-	const char *pu_pd_name;
-	const unsigned int pu_pd_reg;
-	const unsigned char pu_pd_val;
-};
-
-enum omap730_index {
-	/* OMAP 730 keyboard */
-	E2_730_KBR0,
-	J7_730_KBR1,
-	E1_730_KBR2,
-	F3_730_KBR3,
-	D2_730_KBR4,
-	C2_730_KBC0,
-	D3_730_KBC1,
-	E4_730_KBC2,
-	F4_730_KBC3,
-	E3_730_KBC4,
-
-	/* USB */
-	AA17_730_USB_DM,
-	W16_730_USB_PU_EN,
-	W17_730_USB_VBUSI,
-};
-
-enum omap1xxx_index {
-	/* UART1 (BT_UART_GATING)*/
-	UART1_TX = 0,
-	UART1_RTS,
-
-	/* UART2 (COM_UART_GATING)*/
-	UART2_TX,
-	UART2_RX,
-	UART2_CTS,
-	UART2_RTS,
-
-	/* UART3 (GIGA_UART_GATING) */
-	UART3_TX,
-	UART3_RX,
-	UART3_CTS,
-	UART3_RTS,
-	UART3_CLKREQ,
-	UART3_BCLK,	/* 12MHz clock out */
-	Y15_1610_UART3_RTS,
-
-	/* PWT & PWL */
-	PWT,
-	PWL,
-
-	/* USB master generic */
-	R18_USB_VBUS,
-	R18_1510_USB_GPIO0,
-	W4_USB_PUEN,
-	W4_USB_CLKO,
-	W4_USB_HIGHZ,
-	W4_GPIO58,
-
-	/* USB1 master */
-	USB1_SUSP,
-	USB1_SEO,
-	W13_1610_USB1_SE0,
-	USB1_TXEN,
-	USB1_TXD,
-	USB1_VP,
-	USB1_VM,
-	USB1_RCV,
-	USB1_SPEED,
-	R13_1610_USB1_SPEED,
-	R13_1710_USB1_SE0,
-
-	/* USB2 master */
-	USB2_SUSP,
-	USB2_VP,
-	USB2_TXEN,
-	USB2_VM,
-	USB2_RCV,
-	USB2_SEO,
-	USB2_TXD,
-
-	/* OMAP-1510 GPIO */
-	R18_1510_GPIO0,
-	R19_1510_GPIO1,
-	M14_1510_GPIO2,
-
-	/* OMAP1610 GPIO */
-	P18_1610_GPIO3,
-	Y15_1610_GPIO17,
-
-	/* OMAP-1710 GPIO */
-	R18_1710_GPIO0,
-	V2_1710_GPIO10,
-	N21_1710_GPIO14,
-	W15_1710_GPIO40,
-
-	/* MPUIO */
-	MPUIO2,
-	N15_1610_MPUIO2,
-	MPUIO4,
-	MPUIO5,
-	T20_1610_MPUIO5,
-	W11_1610_MPUIO6,
-	V10_1610_MPUIO7,
-	W11_1610_MPUIO9,
-	V10_1610_MPUIO10,
-	W10_1610_MPUIO11,
-	E20_1610_MPUIO13,
-	U20_1610_MPUIO14,
-	E19_1610_MPUIO15,
-
-	/* MCBSP2 */
-	MCBSP2_CLKR,
-	MCBSP2_CLKX,
-	MCBSP2_DR,
-	MCBSP2_DX,
-	MCBSP2_FSR,
-	MCBSP2_FSX,
-
-	/* MCBSP3 */
-	MCBSP3_CLKX,
-
-	/* Misc ballouts */
-	BALLOUT_V8_ARMIO3,
-	N20_HDQ,
-
-	/* OMAP-1610 MMC2 */
-	W8_1610_MMC2_DAT0,
-	V8_1610_MMC2_DAT1,
-	W15_1610_MMC2_DAT2,
-	R10_1610_MMC2_DAT3,
-	Y10_1610_MMC2_CLK,
-	Y8_1610_MMC2_CMD,
-	V9_1610_MMC2_CMDDIR,
-	V5_1610_MMC2_DATDIR0,
-	W19_1610_MMC2_DATDIR1,
-	R18_1610_MMC2_CLKIN,
-
-	/* OMAP-1610 External Trace Interface */
-	M19_1610_ETM_PSTAT0,
-	L15_1610_ETM_PSTAT1,
-	L18_1610_ETM_PSTAT2,
-	L19_1610_ETM_D0,
-	J19_1610_ETM_D6,
-	J18_1610_ETM_D7,
-
-	/* OMAP16XX GPIO */
-	P20_1610_GPIO4,
-	V9_1610_GPIO7,
-	W8_1610_GPIO9,
-	N20_1610_GPIO11,
-	N19_1610_GPIO13,
-	P10_1610_GPIO22,
-	V5_1610_GPIO24,
-	AA20_1610_GPIO_41,
-	W19_1610_GPIO48,
-	M7_1610_GPIO62,
-	V14_16XX_GPIO37,
-	R9_16XX_GPIO18,
-	L14_16XX_GPIO49,
-
-	/* OMAP-1610 uWire */
-	V19_1610_UWIRE_SCLK,
-	U18_1610_UWIRE_SDI,
-	W21_1610_UWIRE_SDO,
-	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS3,
-	N15_1610_UWIRE_CS1,
-
-	/* OMAP-1610 SPI */
-	U19_1610_SPIF_SCK,
-	U18_1610_SPIF_DIN,
-	P20_1610_SPIF_DIN,
-	W21_1610_SPIF_DOUT,
-	R18_1610_SPIF_DOUT,
-	N14_1610_SPIF_CS0,
-	N15_1610_SPIF_CS1,
-	T19_1610_SPIF_CS2,
-	P15_1610_SPIF_CS3,
-
-	/* OMAP-1610 Flash */
-	L3_1610_FLASH_CS2B_OE,
-	M8_1610_FLASH_CS2B_WE,
-
-	/* First MMC */
-	MMC_CMD,
-	MMC_DAT1,
-	MMC_DAT2,
-	MMC_DAT0,
-	MMC_CLK,
-	MMC_DAT3,
-
-	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
-	M15_1710_MMC_CLKI,
-	P19_1710_MMC_CMDDIR,
-	P20_1710_MMC_DATDIR0,
-
-	/* OMAP-1610 USB0 alternate pin configuration */
-	W9_USB0_TXEN,
-	AA9_USB0_VP,
-	Y5_USB0_RCV,
-	R9_USB0_VM,
-	V6_USB0_TXD,
-	W5_USB0_SE0,
-	V9_USB0_SPEED,
-	V9_USB0_SUSP,
-
-	/* USB2 */
-	W9_USB2_TXEN,
-	AA9_USB2_VP,
-	Y5_USB2_RCV,
-	R9_USB2_VM,
-	V6_USB2_TXD,
-	W5_USB2_SE0,
-
-	/* 16XX UART */
-	R13_1610_UART1_TX,
-	V14_16XX_UART1_RX,
-	R14_1610_UART1_CTS,
-	AA15_1610_UART1_RTS,
-	R9_16XX_UART2_RX,
-	L14_16XX_UART3_RX,
-
-	/* I2C OMAP-1610 */
-	I2C_SCL,
-	I2C_SDA,
-
-	/* Keypad */
-	F18_1610_KBC0,
-	D20_1610_KBC1,
-	D19_1610_KBC2,
-	E18_1610_KBC3,
-	C21_1610_KBC4,
-	G18_1610_KBR0,
-	F19_1610_KBR1,
-	H14_1610_KBR2,
-	E20_1610_KBR3,
-	E19_1610_KBR4,
-	N19_1610_KBR5,
-
-	/* Power management */
-	T20_1610_LOW_PWR,
-
-	/* MCLK Settings */
-	V5_1710_MCLK_ON,
-	V5_1710_MCLK_OFF,
-	R10_1610_MCLK_ON,
-	R10_1610_MCLK_OFF,
-
-	/* CompactFlash controller */
-	P11_1610_CF_CD2,
-	R11_1610_CF_IOIS16,
-	V10_1610_CF_IREQ,
-	W10_1610_CF_RESET,
-	W11_1610_CF_CD1,
-
-	/* parallel camera */
-	J15_1610_CAM_LCLK,
-	J18_1610_CAM_D7,
-	J19_1610_CAM_D6,
-	J14_1610_CAM_D5,
-	K18_1610_CAM_D4,
-	K19_1610_CAM_D3,
-	K15_1610_CAM_D2,
-	K14_1610_CAM_D1,
-	L19_1610_CAM_D0,
-	L18_1610_CAM_VS,
-	L15_1610_CAM_HS,
-	M19_1610_CAM_RSTZ,
-	Y15_1610_CAM_OUTCLK,
-
-	/* serial camera */
-	H19_1610_CAM_EXCLK,
-	Y12_1610_CCP_CLKP,
-	W13_1610_CCP_CLKM,
-	W14_1610_CCP_DATAP,
-	Y14_1610_CCP_DATAM,
-
-};
-
-enum omap24xx_index {
-	/* 24xx I2C */
-	M19_24XX_I2C1_SCL,
-	L15_24XX_I2C1_SDA,
-	J15_24XX_I2C2_SCL,
-	H19_24XX_I2C2_SDA,
-
-	/* 24xx Menelaus interrupt */
-	W19_24XX_SYS_NIRQ,
-
-	/* 24xx clock */
-	W14_24XX_SYS_CLKOUT,
-
-	/* 24xx GPMC chipselects, wait pin monitoring */
-	E2_GPMC_NCS2,
-	L2_GPMC_NCS7,
-	L3_GPMC_WAIT0,
-	N7_GPMC_WAIT1,
-	M1_GPMC_WAIT2,
-	P1_GPMC_WAIT3,
-
-	/* 242X McBSP */
-	Y15_24XX_MCBSP2_CLKX,
-	R14_24XX_MCBSP2_FSX,
-	W15_24XX_MCBSP2_DR,
-	V15_24XX_MCBSP2_DX,
-
-	/* 24xx GPIO */
-	M21_242X_GPIO11,
-	P21_242X_GPIO12,
-	AA10_242X_GPIO13,
-	AA6_242X_GPIO14,
-	AA4_242X_GPIO15,
-	Y11_242X_GPIO16,
-	AA12_242X_GPIO17,
-	AA8_242X_GPIO58,
-	Y20_24XX_GPIO60,
-	W4__24XX_GPIO74,
-	N15_24XX_GPIO85,
-	M15_24XX_GPIO92,
-	P20_24XX_GPIO93,
-	P18_24XX_GPIO95,
-	M18_24XX_GPIO96,
-	L14_24XX_GPIO97,
-	J15_24XX_GPIO99,
-	V14_24XX_GPIO117,
-	P14_24XX_GPIO125,
-
-	/* 242x DBG GPIO */
-	V4_242X_GPIO49,
-	W2_242X_GPIO50,
-	U4_242X_GPIO51,
-	V3_242X_GPIO52,
-	V2_242X_GPIO53,
-	V6_242X_GPIO53,
-	T4_242X_GPIO54,
-	Y4_242X_GPIO54,
-	T3_242X_GPIO55,
-	U2_242X_GPIO56,
-
-	/* 24xx external DMA requests */
-	AA10_242X_DMAREQ0,
-	AA6_242X_DMAREQ1,
-	E4_242X_DMAREQ2,
-	G4_242X_DMAREQ3,
-	D3_242X_DMAREQ4,
-	E3_242X_DMAREQ5,
-
-	/* UART3 */
-	K15_24XX_UART3_TX,
-	K14_24XX_UART3_RX,
-
-	/* MMC/SDIO */
-	G19_24XX_MMC_CLKO,
-	H18_24XX_MMC_CMD,
-	F20_24XX_MMC_DAT0,
-	H14_24XX_MMC_DAT1,
-	E19_24XX_MMC_DAT2,
-	D19_24XX_MMC_DAT3,
-	F19_24XX_MMC_DAT_DIR0,
-	E20_24XX_MMC_DAT_DIR1,
-	F18_24XX_MMC_DAT_DIR2,
-	E18_24XX_MMC_DAT_DIR3,
-	G18_24XX_MMC_CMD_DIR,
-	H15_24XX_MMC_CLKI,
-
-	/* Full speed USB */
-	J20_24XX_USB0_PUEN,
-	J19_24XX_USB0_VP,
-	K20_24XX_USB0_VM,
-	J18_24XX_USB0_RCV,
-	K19_24XX_USB0_TXEN,
-	J14_24XX_USB0_SE0,
-	K18_24XX_USB0_DAT,
-
-	N14_24XX_USB1_SE0,
-	W12_24XX_USB1_SE0,
-	P15_24XX_USB1_DAT,
-	R13_24XX_USB1_DAT,
-	W20_24XX_USB1_TXEN,
-	P13_24XX_USB1_TXEN,
-	V19_24XX_USB1_RCV,
-	V12_24XX_USB1_RCV,
-
-	AA10_24XX_USB2_SE0,
-	Y11_24XX_USB2_DAT,
-	AA12_24XX_USB2_TXEN,
-	AA6_24XX_USB2_RCV,
-	AA4_24XX_USB2_TLLSE0,
-
-	/* Keypad GPIO*/
-	T19_24XX_KBR0,
-	R19_24XX_KBR1,
-	V18_24XX_KBR2,
-	M21_24XX_KBR3,
-	E5__24XX_KBR4,
-	M18_24XX_KBR5,
-	R20_24XX_KBC0,
-	M14_24XX_KBC1,
-	H19_24XX_KBC2,
-	V17_24XX_KBC3,
-	P21_24XX_KBC4,
-	L14_24XX_KBC5,
-	N19_24XX_KBC6,
-
-	/* 24xx Menelaus Keypad GPIO */
-	B3__24XX_KBR5,
-	AA4_24XX_KBC2,
-	B13_24XX_KBC6,
-
-	/* 2430 USB */
-	AD9_2430_USB0_PUEN,
-	Y11_2430_USB0_VP,
-	AD7_2430_USB0_VM,
-	AE7_2430_USB0_RCV,
-	AD4_2430_USB0_TXEN,
-	AF9_2430_USB0_SE0,
-	AE6_2430_USB0_DAT,
-	AD24_2430_USB1_SE0,
-	AB24_2430_USB1_RCV,
-	Y25_2430_USB1_TXEN,
-	AA26_2430_USB1_DAT,
-
-	/* 2430 HS-USB */
-	AD9_2430_USB0HS_DATA3,
-	Y11_2430_USB0HS_DATA4,
-	AD7_2430_USB0HS_DATA5,
-	AE7_2430_USB0HS_DATA6,
-	AD4_2430_USB0HS_DATA2,
-	AF9_2430_USB0HS_DATA0,
-	AE6_2430_USB0HS_DATA1,
-	AE8_2430_USB0HS_CLK,
-	AD8_2430_USB0HS_DIR,
-	AE5_2430_USB0HS_STP,
-	AE9_2430_USB0HS_NXT,
-	AC7_2430_USB0HS_DATA7,
-
-	/* 2430 McBSP */
-	AC10_2430_MCBSP2_FSX,
-	AD16_2430_MCBSP2_CLX,
-	AE13_2430_MCBSP2_DX,
-	AD13_2430_MCBSP2_DR,
-	AC10_2430_MCBSP2_FSX_OFF,
-	AD16_2430_MCBSP2_CLX_OFF,
-	AE13_2430_MCBSP2_DX_OFF,
-	AD13_2430_MCBSP2_DR_OFF,
-
-};
-
-struct omap_mux_cfg {
-	struct pin_config	*pins;
-	unsigned long		size;
-	int			(*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef	CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-omap/nand.h b/include/asm-arm/arch-omap/nand.h
deleted file mode 100644
index 17ae26e35353..000000000000
--- a/include/asm-arm/arch-omap/nand.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-arm/arch-omap/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/partitions.h>
-
-struct omap_nand_platform_data {
-	unsigned int		options;
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int			(*nand_setup)(void __iomem *);
-	int			(*dev_ready)(struct omap_nand_platform_data *);
-	int			dma_channel;
-	void __iomem		*gpmc_cs_baseaddr;
-	void __iomem		*gpmc_baseaddr;
-};
diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/include/asm-arm/arch-omap/omap-alsa.h
deleted file mode 100644
index faa0ed23d4ba..000000000000
--- a/include/asm-arm/arch-omap/omap-alsa.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/omap-alsa.h
- *
- * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
- *
- * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
- *
- * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
- * Written by Daniel Petrini, David Cohen, Anderson Briglia
- *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History
- *  -------
- *
- *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
- *  					original version based in sa1100 driver
- *  					and omap oss driver.
- */
-
-#ifndef __OMAP_ALSA_H
-#define __OMAP_ALSA_H
-
-#include <asm/arch/dma.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <asm/arch/mcbsp.h>
-#include <linux/platform_device.h>
-
-#define DMA_BUF_SIZE	(1024 * 8)
-
-/*
- * Buffer management for alsa and dma
- */
-struct audio_stream {
-	char *id;		/* identification string */
-	int stream_id;		/* numeric identification */
-	int dma_dev;		/* dma number of that device */
-	int *lch;		/* Chain of channels this stream is linked to */
-	char started;		/* to store if the chain was started or not */
-	int dma_q_head;		/* DMA Channel Q Head */
-	int dma_q_tail;		/* DMA Channel Q Tail */
-	char dma_q_count;	/* DMA Channel Q Count */
-	int active:1;		/* we are using this stream for transfer now */
-	int period;		/* current transfer period */
-	int periods;		/* current count of periods registerd in the DMA engine */
-	spinlock_t dma_lock;	/* for locking in DMA operations */
-	struct snd_pcm_substream *stream;	/* the pcm stream */
-	unsigned linked:1;	/* dma channels linked */
-	int offset;		/* store start position of the last period in the alsa buffer */
-	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
-	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
-};
-
-/*
- * Alsa card structure for aic23
- */
-struct snd_card_omap_codec {
-	struct snd_card *card;
-	struct snd_pcm *pcm;
-	long samplerate;
-	struct audio_stream s[2];	/* playback & capture */
-};
-
-/* Codec specific information and function pointers.
- * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
- * are responsible for defining the function pointers.
- */
-struct omap_alsa_codec_config {
-	char 	*name;
-	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
-	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
-	struct	snd_pcm_hardware *snd_omap_alsa_playback;
-	struct	snd_pcm_hardware *snd_omap_alsa_capture;
-	void	(*codec_configure_dev)(void);
-	void	(*codec_set_samplerate)(long);
-	void	(*codec_clock_setup)(void);
-	int	(*codec_clock_on)(void);
-	int 	(*codec_clock_off)(void);
-	int	(*get_default_samplerate)(void);
-};
-
-/*********** Mixer function prototypes *************************/
-int snd_omap_mixer(struct snd_card_omap_codec *);
-void snd_omap_init_mixer(void);
-
-#ifdef CONFIG_PM
-void snd_omap_suspend_mixer(void);
-void snd_omap_resume_mixer(void);
-#endif
-
-int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
-int snd_omap_alsa_remove(struct platform_device *pdev);
-#ifdef CONFIG_PM
-int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
-int snd_omap_alsa_resume(struct platform_device *pdev);
-#else
-#define snd_omap_alsa_suspend	NULL
-#define snd_omap_alsa_resume	NULL
-#endif
-
-void callback_omap_alsa_sound_dma(void *);
-
-#endif
diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h
deleted file mode 100644
index c575d354850f..000000000000
--- a/include/asm-arm/arch-omap/omap1510.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap1510.h
- *
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE	0xE0000000
-#define OMAP1510_DSP_SIZE	0x28000
-#define OMAP1510_DSP_START	0xE0000000
-
-#define OMAP1510_DSPREG_BASE	0xE1000000
-#define OMAP1510_DSPREG_SIZE	SZ_128K
-#define OMAP1510_DSPREG_START	0xE1000000
-
-#endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
deleted file mode 100644
index f7f5cdfdccce..000000000000
--- a/include/asm-arm/arch-omap/omap16xx.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap16xx.h
- *
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE	0xE0000000
-#define OMAP16XX_DSP_SIZE	0x28000
-#define OMAP16XX_DSP_START	0xE0000000
-
-#define OMAP16XX_DSPREG_BASE	0xE1000000
-#define OMAP16XX_DSPREG_SIZE	SZ_128K
-#define OMAP16XX_DSPREG_START	0xE1000000
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE		(0xfffe0000)
-#define OMAP_IH2_1_BASE		(0xfffe0100)
-#define OMAP_IH2_2_BASE		(0xfffe0200)
-#define OMAP_IH2_3_BASE		(0xfffe0300)
-
-#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL  0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE		 (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Maping through MPU bus */
-#define UART3_RHR               (OMAP_UART3_BASE + 0)
-#define UART3_THR               (OMAP_UART3_BASE + 0)
-#define UART3_DLL               (OMAP_UART3_BASE + 0)
-#define UART3_IER               (OMAP_UART3_BASE + 4)
-#define UART3_DLH               (OMAP_UART3_BASE + 4)
-#define UART3_IIR               (OMAP_UART3_BASE + 8)
-#define UART3_FCR               (OMAP_UART3_BASE + 8)
-#define UART3_EFR               (OMAP_UART3_BASE + 8)
-#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
-#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT         5
-#define WCLR_PTV_SHIFT         2
-
-#define WWPS_W_PEND_WSPR       (1 << 4)
-#define WWPS_W_PEND_WTGR       (1 << 3)
-#define WWPS_W_PEND_WLDR       (1 << 2)
-#define WWPS_W_PEND_WCRR       (1 << 1)
-#define WWPS_W_PEND_WCLR       (1 << 0)
-
-#define WSPR_ENABLE_0          (0x0000bbbb)
-#define WSPR_ENABLE_1          (0x00004444)
-#define WSPR_DISABLE_0         (0x0000aaaa)
-#define WSPR_DISABLE_1         (0x00005555)
-
-/* Mailbox */
-#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
-
-#endif /*  __ASM_ARCH_OMAP16XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
deleted file mode 100644
index b9fcaae287c8..000000000000
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/asm-arm/arch-omap/omap24xx.h
- *
- * This file contains the processor specific definitions
- * of the TI OMAP24XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP24XX_H
-#define __ASM_ARCH_OMAP24XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers. Note also that some of these defines are needed
- * for omap1 to compile without adding ifdefs.
- */
-
-#define L4_24XX_BASE		0x48000000
-#define L4_WK_243X_BASE		0x49000000
-#define L3_24XX_BASE		0x68000000
-
-/* interrupt controller */
-#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
-#define OMAP24XX_IVA_INTC_BASE	0x40000000
-#define IRQ_SIR_IRQ		0x0040
-
-#define OMAP2420_CTRL_BASE	L4_24XX_BASE
-#define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
-#define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
-#define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
-#define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
-#define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
-#define OMAP2420_SMS_BASE	0x68008000
-
-#define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
-#define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_CM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_PRM_BASE	OMAP2430_CM_BASE
-
-#define OMAP243X_SMS_BASE	0x6C000000
-#define OMAP243X_SDRC_BASE	0x6D000000
-#define OMAP243X_GPMC_BASE	0x6E000000
-#define OMAP243X_SCM_BASE	(L4_WK_243X_BASE + 0x2000)
-#define OMAP243X_CTRL_BASE	OMAP243X_SCM_BASE
-#define OMAP243X_HS_BASE	(L4_24XX_BASE + 0x000ac000)
-
-/* DSP SS */
-#define OMAP2420_DSP_BASE	0x58000000
-#define OMAP2420_DSP_MEM_BASE	(OMAP2420_DSP_BASE + 0x0)
-#define OMAP2420_DSP_IPI_BASE	(OMAP2420_DSP_BASE + 0x1000000)
-#define OMAP2420_DSP_MMU_BASE	(OMAP2420_DSP_BASE + 0x2000000)
-
-#define OMAP243X_DSP_BASE	0x5C000000
-#define OMAP243X_DSP_MEM_BASE	(OMAP243X_DSP_BASE + 0x0)
-#define OMAP243X_DSP_MMU_BASE	(OMAP243X_DSP_BASE + 0x1000000)
-
-/* Mailbox */
-#define OMAP24XX_MAILBOX_BASE	(L4_24XX_BASE + 0x94000)
-
-/* Camera */
-#define OMAP24XX_CAMERA_BASE	(L4_24XX_BASE + 0x52000)
-
-/* Security */
-#define OMAP24XX_SEC_BASE	(L4_24XX_BASE + 0xA0000)
-#define OMAP24XX_SEC_RNG_BASE	(OMAP24XX_SEC_BASE + 0x0000)
-#define OMAP24XX_SEC_DES_BASE	(OMAP24XX_SEC_BASE + 0x2000)
-#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
-#define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
-#define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
-
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE		OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
-#endif /* __ASM_ARCH_OMAP24XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h
deleted file mode 100644
index aa30c6d10abd..000000000000
--- a/include/asm-arm/arch-omap/omap34xx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-arm/arch-omap/omap34xx.h
- *
- * This file contains the processor specific definitions of the TI OMAP34XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_OMAP34XX_H
-#define __ASM_ARCH_OMAP34XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-
-#define L4_34XX_BASE		0x48000000
-#define L4_WK_34XX_BASE		0x48300000
-#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
-#define L4_PER_34XX_BASE	0x49000000
-#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
-#define L4_EMU_34XX_BASE	0x54000000
-#define L4_EMU_BASE		L4_EMU_34XX_BASE
-#define L3_34XX_BASE		0x68000000
-#define L3_OMAP_BASE		L3_34XX_BASE
-
-#define OMAP3430_32KSYNCT_BASE	0x48320000
-#define OMAP3430_CM_BASE	0x48004800
-#define OMAP3430_PRM_BASE	0x48306800
-#define OMAP343X_SMS_BASE	0x6C000000
-#define OMAP343X_SDRC_BASE	0x6D000000
-#define OMAP34XX_GPMC_BASE	0x6E000000
-#define OMAP343X_SCM_BASE	0x48002000
-#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
-
-#define OMAP34XX_IC_BASE	0x48200000
-#define OMAP34XX_IVA_INTC_BASE	0x40000000
-#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
-#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
-
-
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE			OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
-#define OMAP34XX_DSP_BASE	0x58000000
-#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
-#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
-#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
-#endif /* __ASM_ARCH_OMAP34XX_H */
-
diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h
deleted file mode 100644
index 755b64c5e9f0..000000000000
--- a/include/asm-arm/arch-omap/omap730.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-omap/omap730.h
- *
- * Hardware definitions for TI OMAP730 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP730_H
-#define __ASM_ARCH_OMAP730_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP730_DSP_BASE	0xE0000000
-#define OMAP730_DSP_SIZE	0x50000
-#define OMAP730_DSP_START	0xE0000000
-
-#define OMAP730_DSPREG_BASE	0xE1000000
-#define OMAP730_DSPREG_SIZE	SZ_128K
-#define OMAP730_DSPREG_START	0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_CONFIG_BASE	0xfffe1000
-#define OMAP730_IO_CONF_0	0xfffe1070
-#define OMAP730_IO_CONF_1	0xfffe1074
-#define OMAP730_IO_CONF_2	0xfffe1078
-#define OMAP730_IO_CONF_3	0xfffe107c
-#define OMAP730_IO_CONF_4	0xfffe1080
-#define OMAP730_IO_CONF_5	0xfffe1084
-#define OMAP730_IO_CONF_6	0xfffe1088
-#define OMAP730_IO_CONF_7	0xfffe108c
-#define OMAP730_IO_CONF_8	0xfffe1090
-#define OMAP730_IO_CONF_9	0xfffe1094
-#define OMAP730_IO_CONF_10	0xfffe1098
-#define OMAP730_IO_CONF_11	0xfffe109c
-#define OMAP730_IO_CONF_12	0xfffe10a0
-#define OMAP730_IO_CONF_13	0xfffe10a4
-
-#define OMAP730_MODE_1		0xfffe1010
-#define OMAP730_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP730_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_FLASH_CFG_0	0xfffecc10
-#define OMAP730_FLASH_ACFG_0	0xfffecc50
-#define OMAP730_FLASH_CFG_1	0xfffecc14
-#define OMAP730_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_ICR_BASE	0xfffbb800
-#define OMAP730_DSP_M_CTL	0xfffbb804
-#define OMAP730_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP730_H */
-
diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h
deleted file mode 100644
index 46d7a4f60854..000000000000
--- a/include/asm-arm/arch-omap/omapfb.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * File: include/asm-arm/arch-omap/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_EVENT_READY	1
-#define OMAPFB_EVENT_DISABLED	2
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  reserved1;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <asm/arch/board.h>
-
-#define OMAP_LCDC_INV_VSYNC             0x0001
-#define OMAP_LCDC_INV_HSYNC             0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK		0x003f
-
-#define OMAP_LCDC_PANEL_TFT		0x0100
-
-#define OMAPFB_PLANE_XRES_MIN		8
-#define OMAPFB_PLANE_YRES_MIN		8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
-	const char	*name;
-	int		config;		/* TFT/STN, signal inversion */
-	int		bpp;		/* Pixel format in fb mem */
-	int		data_lines;	/* Lines on LCD HW interface */
-
-	int		x_res, y_res;
-	int		pixel_clock;	/* In kHz */
-	int		hsw;		/* Horizontal synchronization
-					   pulse width */
-	int		hfp;		/* Horizontal front porch */
-	int		hbp;		/* Horizontal back porch */
-	int		vsw;		/* Vertical synchronization
-					   pulse width */
-	int		vfp;		/* Vertical front porch */
-	int		vbp;		/* Vertical back porch */
-	int		acb;		/* ac-bias pin frequency */
-	int		pcd;		/* pixel clock divider.
-					   Obsolete use pixel_clock instead */
-
-	int		(*init)		(struct lcd_panel *panel,
-					 struct omapfb_device *fbdev);
-	void		(*cleanup)	(struct lcd_panel *panel);
-	int		(*enable)	(struct lcd_panel *panel);
-	void		(*disable)	(struct lcd_panel *panel);
-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
-	int		(*set_bklight_level)(struct lcd_panel *panel,
-					     unsigned int level);
-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
-	int cs_on_time;
-	int cs_off_time;
-	int we_on_time;
-	int we_off_time;
-	int re_on_time;
-	int re_off_time;
-	int we_cycle_time;
-	int re_cycle_time;
-	int cs_pulse_width;
-	int access_time;
-
-	int clk_div;
-
-	u32 tim[5];		/* set by extif->convert_timings */
-
-	int converted;
-};
-
-struct lcd_ctrl_extif {
-	int  (*init)		(struct omapfb_device *fbdev);
-	void (*cleanup)		(void);
-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
-	unsigned long (*get_max_tx_rate)(void);
-	int  (*convert_timings)	(struct extif_timings *timings);
-	void (*set_timings)	(const struct extif_timings *timings);
-	void (*set_bits_per_cycle)(int bpc);
-	void (*write_command)	(const void *buf, unsigned int len);
-	void (*read_data)	(void *buf, unsigned int len);
-	void (*write_data)	(const void *buf, unsigned int len);
-	void (*transfer_area)	(int width, int height,
-				 void (callback)(void * data), void *data);
-	int  (*setup_tearsync)	(unsigned pin_cnt,
-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
-				 int hs_pol_inv, int vs_pol_inv, int div);
-	int  (*enable_tearsync) (int enable, unsigned line);
-
-	unsigned long		max_transmit_size;
-};
-
-struct omapfb_notifier_block {
-	struct notifier_block	nb;
-	void			*data;
-	int			plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
-					  unsigned long event,
-					  void *fbi);
-
-struct omapfb_mem_region {
-	dma_addr_t	paddr;
-	void		*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
-	const char	*name;
-	void		*data;
-
-	int		(*init)		  (struct omapfb_device *fbdev,
-					   int ext_mode,
-					   struct omapfb_mem_desc *req_md);
-	void		(*cleanup)	  (void);
-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
-	int		(*set_update_mode)(enum omapfb_update_mode mode);
-	enum omapfb_update_mode (*get_update_mode)(void);
-	int		(*setup_plane)	  (int plane, int channel_out,
-					   unsigned long offset,
-					   int screen_width,
-					   int pos_x, int pos_y, int width,
-					   int height, int color_mode);
-	int		(*setup_mem)	  (int plane, size_t size,
-					   int mem_type, unsigned long *paddr);
-	int		(*mmap)		  (struct fb_info *info,
-					   struct vm_area_struct *vma);
-	int		(*set_scale)	  (int plane,
-					   int orig_width, int orig_height,
-					   int out_width, int out_height);
-	int		(*enable_plane)	  (int plane, int enable);
-	int		(*update_window)  (struct fb_info *fbi,
-					   struct omapfb_update_window *win,
-					   void (*callback)(void *),
-					   void *callback_data);
-	void		(*sync)		  (void);
-	void		(*suspend)	  (void);
-	void		(*resume)	  (void);
-	int		(*run_test)	  (int test_num);
-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
-					   u16 blue, u16 transp,
-					   int update_hw_mem);
-	int		(*set_color_key)  (struct omapfb_color_key *ck);
-	int		(*get_color_key)  (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
-	OMAPFB_DISABLED	= 0,
-	OMAPFB_SUSPENDED= 99,
-	OMAPFB_ACTIVE	= 100
-};
-
-struct omapfb_plane_struct {
-	int				idx;
-	struct omapfb_plane_info	info;
-	enum omapfb_color_format	color_mode;
-	struct omapfb_device		*fbdev;
-};
-
-struct omapfb_device {
-	int			state;
-	int                     ext_lcdc;               /* Using external
-                                                           LCD controller */
-	struct mutex		rqueue_mutex;
-
-	int			palette_size;
-	u32			pseudo_palette[17];
-
-	struct lcd_panel	*panel;			/* LCD panel */
-	struct lcd_ctrl         *ctrl;			/* LCD controller */
-	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
-							   interface */
-	struct device		*dev;
-	struct fb_var_screeninfo	new_var;	/* for mode changes */
-
-	struct omapfb_mem_desc		mem_desc;
-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
-	void				*ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
-				  unsigned long event);
-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
-				   omapfb_notifier_callback_t callback,
-				   void *callback_data);
-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int  omapfb_update_window_async(struct fb_info *fbi,
-				       struct omapfb_update_window *win,
-				       void (*callback)(void *),
-				       void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h
deleted file mode 100644
index 6c959d0ce470..000000000000
--- a/include/asm-arm/arch-omap/onenand.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-omap/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/partitions.h>
-
-struct omap_onenand_platform_data {
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int                     (*onenand_setup)(void __iomem *);
-	int			dma_channel;
-};
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
deleted file mode 100644
index face9ad41e97..000000000000
--- a/include/asm-arm/arch-omap/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ	CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
deleted file mode 100644
index 14588059981f..000000000000
--- a/include/asm-arm/arch-omap/pm.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/pm.h
- *
- * Header file for OMAP Power Management Routines
- *
- * Author: MontaVista Software, Inc.
- *	   support@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
-
-/*
- * ----------------------------------------------------------------------------
- * Register and offset definitions to be used in PM assembler code
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
-#define ARM_IDLECT1_ASM_OFFSET		0x04
-#define ARM_IDLECT2_ASM_OFFSET		0x08
-
-#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
-#define EMIFS_CONFIG_ASM_OFFSET		0x0c
-#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
-
-/*
- * ----------------------------------------------------------------------------
- * Power management bitmasks
- * ----------------------------------------------------------------------------
- */
-#define IDLE_WAIT_CYCLES		0x00000fff
-#define PERIPHERAL_ENABLE		0x2
-
-#define SELF_REFRESH_MODE		0x0c000001
-#define IDLE_EMIFS_REQUEST		0xc
-#define MODEM_32K_EN			0x1
-#define PER_EN				0x1
-
-#define CPU_SUSPEND_SIZE		200
-#define ULPD_LOW_PWR_EN			0x0001
-#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
-#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
-#define ULPD_POWER_CTRL_REG_VAL		0x0219
-
-#define DSP_IDLE_DELAY			10
-#define DSP_IDLE			0x0040
-#define DSP_RST				0x0004
-#define DSP_ENABLE			0x0002
-#define SUFFICIENT_DSP_RESET_TIME	1000
-#define DEFAULT_MPUI_CONFIG		0x05cf
-#define ENABLE_XORCLK			0x2
-#define DSP_CLOCK_ENABLE		0x2000
-#define DSP_IDLE_MODE			0x2
-#define TC_IDLE_REQUEST			(0x0000000c)
-
-#define IRQ_LEVEL2			(1<<0)
-#define IRQ_KEYBOARD			(1<<1)
-#define IRQ_UART2			(1<<15)
-
-#define PDE_BIT				0x08
-#define PWD_EN_BIT			0x04
-#define EN_PERCK_BIT			0x04
-
-#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
-#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
-#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
-#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
-
-/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
-#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
-#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP1610_IDLECT3_VAL		0x3f
-#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
-#define OMAP1610_IDLECT3		0xfffece24
-#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
-
-#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP730_IDLECT3_VAL		0x3f
-#define OMAP730_IDLECT3		0xfffece24
-#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
-
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX) && \
-	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
-#endif
-
-#ifndef __ASSEMBLER__
-
-#include <linux/clk.h>
-
-extern void prevent_idle_sleep(void);
-extern void allow_idle_sleep(void);
-
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
-extern void omap1510_cpu_suspend(unsigned short, unsigned short);
-extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
-extern void omap730_idle_loop_suspend(void);
-extern void omap1510_idle_loop_suspend(void);
-extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
-
-extern unsigned int omap730_cpu_suspend_sz;
-extern unsigned int omap1510_cpu_suspend_sz;
-extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
-
-#ifdef CONFIG_OMAP_SERIAL_WAKE
-extern void omap_serial_wake_trigger(int enable);
-#else
-#define omap_serial_wakeup_init()	{}
-#define omap_serial_wake_trigger(x)	{}
-#endif	/* CONFIG_OMAP_SERIAL_WAKE */
-
-#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
-#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
-#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
-
-#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
-#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
-#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
-
-#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
-#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
-#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
-
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
-
-#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
-#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
-
-#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
-#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
-/*
- * List of global OMAP registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-
-enum arm_save_state {
-	ARM_SLEEP_SAVE_START = 0,
-	/*
-	 * MPU control registers 32 bits
-	 */
-	ARM_SLEEP_SAVE_ARM_CKCTL,
-	ARM_SLEEP_SAVE_ARM_IDLECT1,
-	ARM_SLEEP_SAVE_ARM_IDLECT2,
-	ARM_SLEEP_SAVE_ARM_IDLECT3,
-	ARM_SLEEP_SAVE_ARM_EWUPCT,
-	ARM_SLEEP_SAVE_ARM_RSTCT1,
-	ARM_SLEEP_SAVE_ARM_RSTCT2,
-	ARM_SLEEP_SAVE_ARM_SYSST,
-	ARM_SLEEP_SAVE_SIZE
-};
-
-enum dsp_save_state {
-	DSP_SLEEP_SAVE_START = 0,
-	/*
-	 * DSP registers 16 bits
-	 */
-	DSP_SLEEP_SAVE_DSP_IDLECT2,
-	DSP_SLEEP_SAVE_SIZE
-};
-
-enum ulpd_save_state {
-	ULPD_SLEEP_SAVE_START = 0,
-	/*
-	 * ULPD registers 16 bits
-	 */
-	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
-	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
-	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
-	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
-	ULPD_SLEEP_SAVE_SIZE
-};
-
-enum mpui1510_save_state {
-	MPUI1510_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP15XX)
-	MPUI1510_SLEEP_SAVE_SIZE
-#else
-	MPUI1510_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui730_save_state {
-	MPUI730_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI730_SLEEP_SAVE_MPUI_CTRL,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730)
-	MPUI730_SLEEP_SAVE_SIZE
-#else
-	MPUI730_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui1610_save_state {
-	MPUI1610_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
-#if defined(CONFIG_ARCH_OMAP16XX)
-	MPUI1610_SLEEP_SAVE_SIZE
-#else
-	MPUI1610_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum omap24xx_save_state {
-	OMAP24XX_SLEEP_SAVE_START = 0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
-	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
-	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
-	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
-	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
-	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
-	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
-	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
-	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
-	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
-	OMAP24XX_SLEEP_SAVE_SIZE
-};
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h
deleted file mode 100644
index 7bcaf94bde9f..000000000000
--- a/include/asm-arm/arch-omap/prcm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/prcm.h
- *
- * Access definations for use in OMAP24XX clock and power management
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
-
-u32 omap_prcm_get_reset_sources(void);
-
-#endif
-
-
-
-
-
diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
deleted file mode 100644
index 673b3965befc..000000000000
--- a/include/asm-arm/arch-omap/sdrc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/io.h>
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG		0x010
-#define SDRC_DLLA_CTRL		0x060
-#define SDRC_DLLA_STATUS	0x064
-#define SDRC_DLLB_CTRL		0x068
-#define SDRC_DLLB_STATUS	0x06C
-#define SDRC_POWER		0x070
-#define SDRC_MR_0		0x084
-#define SDRC_RFR_CTRL_0		0x0a4
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-
-#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG		0x010
-/* REVISIT: fill in other SMS registers here */
-
-#endif
diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h
deleted file mode 100644
index 79a5297af9fc..000000000000
--- a/include/asm-arm/arch-omap/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/serial.h
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#if defined(CONFIG_ARCH_OMAP1)
-/* OMAP1 serial ports */
-#define OMAP_UART1_BASE		0xfffb0000
-#define OMAP_UART2_BASE		0xfffb0800
-#define OMAP_UART3_BASE		0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
-/* OMAP2 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x4806e000
-#endif
-
-#define OMAP_MAX_NR_PORTS	3
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
-
-#define is_omap_port(p)	({int __ret = 0;			\
-			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
-				__ret = 1;			\
-			__ret;					\
-			})
-
-#endif
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
deleted file mode 100644
index be59f4a9828b..000000000000
--- a/include/asm-arm/arch-omap/sram.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-extern int __init omap_sram_init(void);
-extern void * omap_sram_push(void * start, unsigned long size);
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-#endif
diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h
deleted file mode 100644
index ac2bfa433f06..000000000000
--- a/include/asm-arm/arch-omap/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copied from linux/include/asm-arm/arch-sa1100/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset()		do {} while (0)
-#endif
-
-extern void omap_prcm_arch_reset(char mode);
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void omap1_arch_reset(char mode)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
-				 DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	if (machine_is_voiceblue())
-		voiceblue_reset();
-	else
-		omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode)
-{
-	if (!cpu_is_omap24xx())
-		omap1_arch_reset(mode);
-	else
-		omap_prcm_arch_reset(mode);
-}
-
-#endif
diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h
deleted file mode 100644
index 65a9c82d3bf7..000000000000
--- a/include/asm-arm/arch-omap/tc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/tc.h
- *
- * OMAP Traffic Controller
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_TC_H
-#define __ASM_ARCH_TC_H
-
-#define TCMIF_BASE		0xfffecc00
-#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
-#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
-#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
-#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
-#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
-#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
-#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
-#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
-#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
-#define EMIFF_MRS		(TCMIF_BASE + 0x24)
-#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
-#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
-#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
-#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
-#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
-#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
-#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
-#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
-#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
-#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
-#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
-
-/* external EMIFS chipselect regions */
-#define	OMAP_CS0_PHYS		0x00000000
-#define	OMAP_CS0_SIZE		SZ_64M
-
-#define	OMAP_CS1_PHYS		0x04000000
-#define	OMAP_CS1_SIZE		SZ_64M
-
-#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
-#define	OMAP_CS1A_SIZE		SZ_32M
-
-#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
-#define	OMAP_CS1B_SIZE		SZ_32M
-
-#define	OMAP_CS2_PHYS		0x08000000
-#define	OMAP_CS2_SIZE		SZ_64M
-
-#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
-#define	OMAP_CS2A_SIZE		SZ_32M
-
-#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
-#define	OMAP_CS2B_SIZE		SZ_32M
-
-#define	OMAP_CS3_PHYS		0x0c000000
-#define	OMAP_CS3_SIZE		SZ_64M
-
-#ifndef	__ASSEMBLER__
-
-/* EMIF Slow Interface Configuration Register */
-#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
-#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
-#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
-#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
-#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
-
-#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
-
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear.  Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-static inline u32 omap_cs0_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			?  OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			? 0 : OMAP_CS3_PHYS;
-}
-
-#endif	/* __ASSEMBLER__ */
-
-#endif	/* __ASM_ARCH_TC_H */
diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h
deleted file mode 100644
index 21f2e367185a..000000000000
--- a/include/asm-arm/arch-omap/timex.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author:  Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-/*
- * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
- * and that's why the CLOCK_TICK_RATE is not 32768.
- */
-#ifdef CONFIG_OMAP_32K_TIMER
-#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
-#else
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
-#endif
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
deleted file mode 100644
index aca0adfef1b8..000000000000
--- a/include/asm-arm/arch-omap/uncompress.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/arch/serial.h>
-
-unsigned int system_rev;
-
-#define UART_OMAP_MDR1		0x08	/* mode definition register */
-#define OMAP_ID_730		0x355F
-#define ID_MASK			0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
-
-static void putc(int c)
-{
-	volatile u8 * uart = 0;
-	int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
-	uart = (volatile u8 *)(OMAP_UART1_BASE);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-	/* Determine which serial port to use */
-	do {
-		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
-		unsigned int omap_id = omap_get_id();
-
-		if (omap_id == OMAP_ID_730)
-			shift = 0;
-
-		if (check_port(uart, shift))
-			break;
-		/* Silent boot if no serial ports are enabled. */
-		return;
-	} while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
-
-	/*
-	 * Now, xmit each character
-	 */
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX << shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
deleted file mode 100644
index ddf1861e6df9..000000000000
--- a/include/asm-arm/arch-omap/usb.h
+++ /dev/null
@@ -1,141 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef	__ASM_ARCH_OMAP_USB_H
-#define	__ASM_ARCH_OMAP_USB_H
-
-#include <asm/arch/board.h>
-
-/*-------------------------------------------------------------------------*/
-
-#define OMAP1_OTG_BASE			0xfffb0400
-#define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
-
-#define OMAP2_OHCI_BASE			0x4805e000
-#define OMAP2_UDC_BASE			0x4805e200
-#define OMAP2_OTG_BASE			0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE			OMAP1_OTG_BASE
-#define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE			OMAP2_OTG_BASE
-#define UDC_BASE			OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV				(OTG_BASE + 0x00)
-#define OTG_SYSCON_1			(OTG_BASE + 0x04)
-#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
-#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
-#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
-#	define	 OTG_IDLE_EN		(1 << 15)
-#	define	 HST_IDLE_EN		(1 << 14)
-#	define	 DEV_IDLE_EN		(1 << 13)
-#	define	 OTG_RESET_DONE		(1 << 2)
-#	define	 OTG_SOFT_RESET		(1 << 1)
-#define OTG_SYSCON_2			(OTG_BASE + 0x08)
-#	define	 OTG_EN			(1 << 31)
-#	define	 USBX_SYNCHRO		(1 << 30)
-#	define	 OTG_MST16		(1 << 29)
-#	define	 SRP_GPDATA		(1 << 28)
-#	define	 SRP_GPDVBUS		(1 << 27)
-#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
-#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
-#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
-#	define	 SRP_DPW		(1 << 14)
-#	define	 SRP_DATA		(1 << 13)
-#	define	 SRP_VBUS		(1 << 12)
-#	define	 OTG_PADEN		(1 << 10)
-#	define	 HMC_PADEN		(1 << 9)
-#	define	 UHOST_EN		(1 << 8)
-#	define	 HMC_TLLSPEED		(1 << 7)
-#	define	 HMC_TLLATTACH		(1 << 6)
-#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
-#define OTG_CTRL			(OTG_BASE + 0x0c)
-#	define	 OTG_USB2_EN		(1 << 29)
-#	define	 OTG_USB2_DP		(1 << 28)
-#	define	 OTG_USB2_DM		(1 << 27)
-#	define	 OTG_USB1_EN		(1 << 26)
-#	define	 OTG_USB1_DP		(1 << 25)
-#	define	 OTG_USB1_DM		(1 << 24)
-#	define	 OTG_USB0_EN		(1 << 23)
-#	define	 OTG_USB0_DP		(1 << 22)
-#	define	 OTG_USB0_DM		(1 << 21)
-#	define	 OTG_ASESSVLD		(1 << 20)
-#	define	 OTG_BSESSEND		(1 << 19)
-#	define	 OTG_BSESSVLD		(1 << 18)
-#	define	 OTG_VBUSVLD		(1 << 17)
-#	define	 OTG_ID			(1 << 16)
-#	define	 OTG_DRIVER_SEL		(1 << 15)
-#	define	 OTG_A_SETB_HNPEN	(1 << 12)
-#	define	 OTG_A_BUSREQ		(1 << 11)
-#	define	 OTG_B_HNPEN		(1 << 9)
-#	define	 OTG_B_BUSREQ		(1 << 8)
-#	define	 OTG_BUSDROP		(1 << 7)
-#	define	 OTG_PULLDOWN		(1 << 5)
-#	define	 OTG_PULLUP		(1 << 4)
-#	define	 OTG_DRV_VBUS		(1 << 3)
-#	define	 OTG_PD_VBUS		(1 << 2)
-#	define	 OTG_PU_VBUS		(1 << 1)
-#	define	 OTG_PU_ID		(1 << 0)
-#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
-#	define	 DRIVER_SWITCH		(1 << 15)
-#	define	 A_VBUS_ERR		(1 << 13)
-#	define	 A_REQ_TMROUT		(1 << 12)
-#	define	 A_SRP_DETECT		(1 << 11)
-#	define	 B_HNP_FAIL		(1 << 10)
-#	define	 B_SRP_TMROUT		(1 << 9)
-#	define	 B_SRP_DONE		(1 << 8)
-#	define	 B_SRP_STARTED		(1 << 7)
-#	define	 OPRT_CHG		(1 << 0)
-#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
-	// same bits as in IRQ_EN
-#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
-#	define	 OTGVPD			(1 << 14)
-#	define	 OTGVPU			(1 << 13)
-#	define	 OTGPUID		(1 << 12)
-#	define	 USB2VDR		(1 << 10)
-#	define	 USB2PDEN		(1 << 9)
-#	define	 USB2PUEN		(1 << 8)
-#	define	 USB1VDR		(1 << 6)
-#	define	 USB1PDEN		(1 << 5)
-#	define	 USB1PUEN		(1 << 4)
-#	define	 USB0VDR		(1 << 2)
-#	define	 USB0PDEN		(1 << 1)
-#	define	 USB0PUEN		(1 << 0)
-#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
-#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
-#	define	CONF_USB2_UNI_R		(1 << 8)
-#	define	CONF_USB1_UNI_R		(1 << 7)
-#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
-#	define	CONF_USB0_ISOLATE_R	(1 << 3)
-#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
-#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
-
-/* OMAP2 */
-#	define	USB_UNIDIR			0x0
-#	define	USB_UNIDIR_TLL			0x1
-#	define	USB_BIDIR			0x2
-#	define	USB_BIDIR_TLL			0x3
-#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
-#	define	USBT2TLL5PI		(1 << 17)
-#	define	USB0PUENACTLOI		(1 << 16)
-#	define	USBSTANDBYCTRL		(1 << 15)
-
-#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h
deleted file mode 100644
index 5b8bd8dae8be..000000000000
--- a/include/asm-arm/arch-omap/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
-
diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S
deleted file mode 100644
index 4f98f3ba2929..000000000000
--- a/include/asm-arm/arch-orion5x/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/debug-macro.S
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/orion5x.h>
-
-	.macro  addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
-	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-orion5x/dma.h b/include/asm-arm/arch-orion5x/dma.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/include/asm-arm/arch-orion5x/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S
deleted file mode 100644
index d8ef54c0ee9a..000000000000
--- a/include/asm-arm/arch-orion5x/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/arch/orion5x.h>
-
-	.macro  disable_fiq
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MAIN_IRQ_CAUSE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #0]		@ main cause
-	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
-	mov	\irqnr, #0			@ default irqnr
-	@ find cause bits that are unmasked
-	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
-	clzne	\irqnr,	\irqstat		@ calc irqnr
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h
deleted file mode 100644
index c85e498388b6..000000000000
--- a/include/asm-arm/arch-orion5x/gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-extern int gpio_request(unsigned pin, const char *label);
-extern void gpio_free(unsigned pin);
-extern int gpio_direction_input(unsigned pin);
-extern int gpio_direction_output(unsigned pin, int value);
-extern int gpio_get_value(unsigned pin);
-extern void gpio_set_value(unsigned pin, int value);
-extern void orion5x_gpio_set_blink(unsigned pin, int blink);
-extern void gpio_display(void);		/* debug */
-
-static inline int gpio_to_irq(int pin)
-{
-	return pin + IRQ_ORION5X_GPIO_START;
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	return irq - IRQ_ORION5X_GPIO_START;
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
diff --git a/include/asm-arm/arch-orion5x/hardware.h b/include/asm-arm/arch-orion5x/hardware.h
deleted file mode 100644
index 5d2d8e0b5630..000000000000
--- a/include/asm-arm/arch-orion5x/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		0x01000000
-#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h
deleted file mode 100644
index 59f1bc96a23b..000000000000
--- a/include/asm-arm/arch-orion5x/io.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/io.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "orion5x.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *
-__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
-{
-	void __iomem *retval;
-	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
-	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
-	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
-		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
-	} else {
-		retval = __arm_ioremap(paddr, size, mtype);
-	}
-
-	return retval;
-}
-
-static inline void
-__arch_iounmap(void __iomem *addr)
-{
-	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
-	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
-		__iounmap(addr);
-}
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
-#define __arch_iounmap(a)	__arch_iounmap(a)
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-
-/*****************************************************************************
- * Helpers to access Orion registers
- ****************************************************************************/
-/*
- * These are not preempt-safe.  Locks, if needed, must be taken
- * care of by the caller.
- */
-#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
-#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h
deleted file mode 100644
index abdd61a4833a..000000000000
--- a/include/asm-arm/arch-orion5x/irqs.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/irqs.h
- *
- * IRQ definitions for Orion SoC
- *
- *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "orion5x.h"	/* need GPIO_MAX */
-
-/*
- * Orion Main Interrupt Controller
- */
-#define IRQ_ORION5X_BRIDGE		0
-#define IRQ_ORION5X_DOORBELL_H2C	1
-#define IRQ_ORION5X_DOORBELL_C2H	2
-#define IRQ_ORION5X_UART0		3
-#define IRQ_ORION5X_UART1		4
-#define IRQ_ORION5X_I2C			5
-#define IRQ_ORION5X_GPIO_0_7		6
-#define IRQ_ORION5X_GPIO_8_15		7
-#define IRQ_ORION5X_GPIO_16_23		8
-#define IRQ_ORION5X_GPIO_24_31		9
-#define IRQ_ORION5X_PCIE0_ERR		10
-#define IRQ_ORION5X_PCIE0_INT		11
-#define IRQ_ORION5X_USB1_CTRL		12
-#define IRQ_ORION5X_DEV_BUS_ERR		14
-#define IRQ_ORION5X_PCI_ERR		15
-#define IRQ_ORION5X_USB_BR_ERR		16
-#define IRQ_ORION5X_USB0_CTRL		17
-#define IRQ_ORION5X_ETH_RX		18
-#define IRQ_ORION5X_ETH_TX		19
-#define IRQ_ORION5X_ETH_MISC		20
-#define IRQ_ORION5X_ETH_SUM		21
-#define IRQ_ORION5X_ETH_ERR		22
-#define IRQ_ORION5X_IDMA_ERR		23
-#define IRQ_ORION5X_IDMA_0		24
-#define IRQ_ORION5X_IDMA_1		25
-#define IRQ_ORION5X_IDMA_2		26
-#define IRQ_ORION5X_IDMA_3		27
-#define IRQ_ORION5X_CESA		28
-#define IRQ_ORION5X_SATA		29
-#define IRQ_ORION5X_XOR0		30
-#define IRQ_ORION5X_XOR1		31
-
-/*
- * Orion General Purpose Pins
- */
-#define IRQ_ORION5X_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/memory.h b/include/asm-arm/arch-orion5x/memory.h
deleted file mode 100644
index 80053a7afc7a..000000000000
--- a/include/asm-arm/arch-orion5x/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x00000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h
deleted file mode 100644
index 10257f5c5e9e..000000000000
--- a/include/asm-arm/arch-orion5x/orion5x.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/orion5x.h
- *
- * Generic definitions of Orion SoC flavors:
- *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_ORION5X_H
-#define __ASM_ARCH_ORION5X_H
-
-/*****************************************************************************
- * Orion Address Maps
- *
- * phys
- * e0000000	PCIe MEM space
- * e8000000	PCI MEM space
- * f0000000	PCIe WA space (Orion-1/Orion-NAS only)
- * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f2100000	PCI I/O space
- * f4000000	device bus mappings (boot)
- * fa000000	device bus mappings (cs0)
- * fa800000	device bus mappings (cs2)
- * fc000000	device bus mappings (cs0/cs1)
- *
- * virt		phys		size
- * fdd00000	f1000000	1M	on-chip peripheral registers
- * fde00000	f2000000	1M	PCIe I/O space
- * fdf00000	f2100000	1M	PCI I/O space
- * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
- ****************************************************************************/
-#define ORION5X_REGS_PHYS_BASE		0xf1000000
-#define ORION5X_REGS_VIRT_BASE		0xfdd00000
-#define ORION5X_REGS_SIZE		SZ_1M
-
-#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
-#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
-#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
-#define ORION5X_PCIE_IO_SIZE		SZ_1M
-
-#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
-#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
-#define ORION5X_PCI_IO_BUS_BASE		0x00100000
-#define ORION5X_PCI_IO_SIZE		SZ_1M
-
-/* Relevant only for Orion-1/Orion-NAS */
-#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
-#define ORION5X_PCIE_WA_SIZE		SZ_16M
-
-#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
-#define ORION5X_PCIE_MEM_SIZE		SZ_128M
-
-#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
-#define ORION5X_PCI_MEM_SIZE		SZ_128M
-
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID	0x5181
-#define MV88F5181_REV_B1	3
-#define MV88F5181L_REV_A0	8
-#define MV88F5181L_REV_A1	9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID	0x5182
-#define MV88F5182_REV_A2	2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID	0x5281
-#define MV88F5281_REV_D1	5
-#define MV88F5281_REV_D2	6
-
-/*******************************************************************************
- * Orion Registers Map
- ******************************************************************************/
-#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
-
-#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
-#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
-
-#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
-#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
-#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
-
-#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
-
-#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
-
-#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
-
-#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
-
-#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
-
-/*******************************************************************************
- * Device Bus Registers
- ******************************************************************************/
-#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
-#define GPIO_OUT		ORION5X_DEV_BUS_REG(0x100)
-#define GPIO_IO_CONF		ORION5X_DEV_BUS_REG(0x104)
-#define GPIO_BLINK_EN		ORION5X_DEV_BUS_REG(0x108)
-#define GPIO_IN_POL		ORION5X_DEV_BUS_REG(0x10c)
-#define GPIO_DATA_IN		ORION5X_DEV_BUS_REG(0x110)
-#define GPIO_EDGE_CAUSE		ORION5X_DEV_BUS_REG(0x114)
-#define GPIO_EDGE_MASK		ORION5X_DEV_BUS_REG(0x118)
-#define GPIO_LEVEL_MASK		ORION5X_DEV_BUS_REG(0x11c)
-#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
-#define GPIO_MAX		32
-
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
-#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
-#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
-#define  BRIDGE_INT_TIMER0	0x0002
-#define  BRIDGE_INT_TIMER1	0x0004
-#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/system.h b/include/asm-arm/arch-orion5x/system.h
deleted file mode 100644
index 3f1d1e2d38f8..000000000000
--- a/include/asm-arm/arch-orion5x/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	/*
-	 * Enable and issue soft reset
-	 */
-	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
-	orion5x_setbits(CPU_SOFT_RESET, 1);
-}
-
-
-#endif
diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h
deleted file mode 100644
index 31c568e28cc3..000000000000
--- a/include/asm-arm/arch-orion5x/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
-#define ORION5X_TCLK		166666667
diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h
deleted file mode 100644
index 7548cedf2d76..000000000000
--- a/include/asm-arm/arch-orion5x/uncompress.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/orion5x.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h
deleted file mode 100644
index 2b3061e90dc1..000000000000
--- a/include/asm-arm/arch-orion5x/vmalloc.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * include/asm-arm/arch-orion5x/vmalloc.h
- */
-
-#define VMALLOC_END       0xfd800000
diff --git a/include/asm-arm/arch-pnx4008/clock.h b/include/asm-arm/arch-pnx4008/clock.h
deleted file mode 100644
index ce155e161269..000000000000
--- a/include/asm-arm/arch-pnx4008/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S
deleted file mode 100644
index 67d18a203d23..000000000000
--- a/include/asm-arm/arch-pnx4008/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-pnx4008/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		mov	\rx, #0x00090000
-		addeq	\rx, \rx, #0x40000000
-		addne	\rx, \rx, #0xf4000000
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pnx4008/dma.h b/include/asm-arm/arch-pnx4008/dma.h
deleted file mode 100644
index 418f15283ff1..000000000000
--- a/include/asm-arm/arch-pnx4008/dma.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/dma.h
- *
- *  PNX4008 DMA header file
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
-#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
-	WIDTH_BYTE = 0,
-	WIDTH_HWORD,
-	WIDTH_WORD
-};
-
-enum {
-	FC_MEM2MEM_DMA,
-	FC_MEM2PER_DMA,
-	FC_PER2MEM_DMA,
-	FC_PER2PER_DMA,
-	FC_PER2PER_DPER,
-	FC_MEM2PER_PER,
-	FC_PER2MEM_PER,
-	FC_PER2PER_SPER
-};
-
-enum {
-	DMA_INT_UNKNOWN = 0,
-	DMA_ERR_INT = 1,
-	DMA_TC_INT = 2,
-};
-
-enum {
-	DMA_BUFFER_ALLOCATED = 1,
-	DMA_HAS_LL = 2,
-};
-
-enum {
-	PER_CAM_DMA_1 = 0,
-	PER_NDF_FLASH = 1,
-	PER_MBX_SLAVE_FIFO = 2,
-	PER_SPI2_REC_XMIT = 3,
-	PER_MS_SD_RX_XMIT = 4,
-	PER_HS_UART_1_XMIT = 5,
-	PER_HS_UART_1_RX = 6,
-	PER_HS_UART_2_XMIT = 7,
-	PER_HS_UART_2_RX = 8,
-	PER_HS_UART_7_XMIT = 9,
-	PER_HS_UART_7_RX = 10,
-	PER_SPI1_REC_XMIT = 11,
-	PER_MLC_NDF_SREC = 12,
-	PER_CAM_DMA_2 = 13,
-	PER_PRNG_INFIFO = 14,
-	PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
-	int tc_mask;
-	int cacheable;
-	int bufferable;
-	int priv_mode;
-	int di;
-	int si;
-	int dest_ahb1;
-	int src_ahb1;
-	int dwidth;
-	int swidth;
-	int dbsize;
-	int sbsize;
-	int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
-	int halt;
-	int active;
-	int lock;
-	int itc;
-	int ie;
-	int flow_cntrl;
-	int dest_per;
-	int src_per;
-};
-
-struct pnx4008_dma_ll {
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	u32 next_dma;
-	unsigned long ch_ctrl;
-	struct pnx4008_dma_ll *next;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
-	int is_ll;
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	unsigned long ch_ctrl;
-	unsigned long ch_cfg;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
-				   void (*)(int, int, void *),
-				   void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
-				    unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
-				     struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
-				   unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
-				    struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
-					 struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
-				       struct pnx4008_dma_ch_ctrl *);
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/include/asm-arm/arch-pnx4008/entry-macro.S
deleted file mode 100644
index f11731974e5d..000000000000
--- a/include/asm-arm/arch-pnx4008/entry-macro.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE         0xF0000000
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK			0x00
-#define INTRC_RAW_STAT			0x04
-#define INTRC_STAT			0x08
-#define INTRC_POLAR			0x0C
-#define INTRC_ACT_TYPE			0x10
-#define INTRC_TYPE			0x14
-
-#define SIC1_BASE_INT   32
-#define SIC2_BASE_INT   64
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
-		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-		ldr	\irqstat, [\base, #INTRC_STAT]
-
-		cmp	\irqstat,#1<<16
-		movhs	\irqnr,#16
-		movlo	\irqnr,#0
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
-		teq	\irqstat,#0
-		beq	1003f
-
-/* and now check for extended IRQ reasons */
-		cmp	\irqnr,#1
-		bls	1003f
-		cmp	\irqnr,#30
-		blo	1002f
-
-/* IRQ 31,30  : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		moveq  \irqnr,#SIC1_BASE_INT
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		movne   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		and	\irqstat,\irqstat,\tmp
-		b	1004f
-
-1003:
-/* IRQ 1,0  : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number  */
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		movne   \irqnr,#SIC1_BASE_INT
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		moveq   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		bic	\irqstat,\irqstat,\tmp
-
-1004:
-
-		cmp	\irqstat,#1<<16
-		addhs	\irqnr,\irqnr,#16
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
-		teq	\irqstat,#0
-1003:
-		.endm
-
-
-		.macro	irq_prio_table
-		.endm
-
-
diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h
deleted file mode 100644
index d01bf83d55c2..000000000000
--- a/include/asm-arm/arch-pnx4008/gpio.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/gpio.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN		(0)
-#define GPIO_OUT		(0x100)
-#define GPIO_BID		(0x200)
-#define GPIO_RAM		(0x300)
-#define GPIO_MUX		(0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00		(GPIO_IN | 0)
-#define GPI_01		(GPIO_IN | 1)
-#define GPI_02   	(GPIO_IN | 2)
-#define GPI_03 	 	(GPIO_IN | 3)
-#define GPI_04   	(GPIO_IN | 4)
-#define GPI_05   	(GPIO_IN | 5)
-#define GPI_06   	(GPIO_IN | 6)
-#define GPI_07   	(GPIO_IN | 7)
-#define GPI_08   	(GPIO_IN | 8)
-#define GPI_09   	(GPIO_IN | 9)
-#define U1_RX 		(GPIO_IN | 15)
-#define U2_HTCS 	(GPIO_IN | 16)
-#define U2_RX	 	(GPIO_IN | 17)
-#define U3_RX		(GPIO_IN | 18)
-#define U4_RX		(GPIO_IN | 19)
-#define U5_RX		(GPIO_IN | 20)
-#define U6_IRRX 	(GPIO_IN | 21)
-#define U7_HCTS 	(GPIO_IN | 22)
-#define U7_RX		(GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN	(GPIO_IN | 25)
-#define DISP_SYNC	(GPIO_IN | 26)
-#define SPI2_DATIN	(GPIO_IN | 27)
-#define GPI_11  	(GPIO_IN | 28)
-
-#define GPIO_IN_MASK   0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00		(GPIO_OUT | 0)
-#define GPO_01   	(GPIO_OUT | 1)
-#define GPO_02   	(GPIO_OUT | 2)
-#define GPO_03 	 	(GPIO_OUT | 3)
-#define GPO_04   	(GPIO_OUT | 4)
-#define GPO_05   	(GPIO_OUT | 5)
-#define GPO_06   	(GPIO_OUT | 6)
-#define GPO_07   	(GPIO_OUT | 7)
-#define GPO_08		(GPIO_OUT | 8)
-#define GPO_09   	(GPIO_OUT | 9)
-#define GPO_10   	(GPIO_OUT | 10)
-#define GPO_11 	 	(GPIO_OUT | 11)
-#define GPO_12   	(GPIO_OUT | 12)
-#define GPO_13   	(GPIO_OUT | 13)
-#define GPO_14   	(GPIO_OUT | 14)
-#define GPO_15   	(GPIO_OUT | 15)
-#define GPO_16  	(GPIO_OUT | 16)
-#define GPO_17 	 	(GPIO_OUT | 17)
-#define GPO_18   	(GPIO_OUT | 18)
-#define GPO_19   	(GPIO_OUT | 19)
-#define GPO_20   	(GPIO_OUT | 20)
-#define GPO_21   	(GPIO_OUT | 21)
-#define GPO_22   	(GPIO_OUT | 22)
-#define GPO_23   	(GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK   0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19		(GPIO_RAM | 0)
-#define RAM_D20  	(GPIO_RAM | 1)
-#define RAM_D21  	(GPIO_RAM | 2)
-#define RAM_D22 	(GPIO_RAM | 3)
-#define RAM_D23  	(GPIO_RAM | 4)
-#define RAM_D24  	(GPIO_RAM | 5)
-#define RAM_D25  	(GPIO_RAM | 6)
-#define RAM_D26  	(GPIO_RAM | 7)
-#define RAM_D27		(GPIO_RAM | 8)
-#define RAM_D28  	(GPIO_RAM | 9)
-#define RAM_D29  	(GPIO_RAM | 10)
-#define RAM_D30 	(GPIO_RAM | 11)
-#define RAM_D31  	(GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK   0x1fff
-
-/* I/O pins */
-#define GPIO_00  	(GPIO_BID | 25)
-#define GPIO_01 	(GPIO_BID | 26)
-#define GPIO_02  	(GPIO_BID | 27)
-#define GPIO_03  	(GPIO_BID | 28)
-#define GPIO_04 	(GPIO_BID | 29)
-#define GPIO_05  	(GPIO_BID | 30)
-
-#define GPIO_BID_MASK   0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK   0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-#define SE_USB_OTG_ATX_INT_N    19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT        17
-#define SE_KEY_IRQ              16
-#define SE_DSP_SLAVEPORT_INT    15
-#define SE_DSP_GPIO1_INT        14
-#define SE_DSP_GPIO0_INT        13
-#define SE_DSP_AHB_INT          12
-/*11-6 unused*/
-#define SE_GPIO_05_INT          5
-#define SE_GPIO_04_INT          4
-#define SE_GPIO_03_INT          3
-#define SE_GPIO_02_INT          2
-#define SE_GPIO_01_INT          1
-#define SE_GPIO_00_INT          0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif				/* _PNX4008_GPIO_H_ */
diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/include/asm-arm/arch-pnx4008/hardware.h
deleted file mode 100644
index a4410397a921..000000000000
--- a/include/asm-arm/arch-pnx4008/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE         0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h
deleted file mode 100644
index 92e8d65006f7..000000000000
--- a/include/asm-arm/arch-pnx4008/i2c.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H__
-#define __ASM_ARCH_I2C_H__
-
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-
-enum {
-	mstatus_tdi = 0x00000001,
-	mstatus_afi = 0x00000002,
-	mstatus_nai = 0x00000004,
-	mstatus_drmi = 0x00000008,
-	mstatus_active = 0x00000020,
-	mstatus_scl = 0x00000040,
-	mstatus_sda = 0x00000080,
-	mstatus_rff = 0x00000100,
-	mstatus_rfe = 0x00000200,
-	mstatus_tff = 0x00000400,
-	mstatus_tfe = 0x00000800,
-};
-
-enum {
-	mcntrl_tdie = 0x00000001,
-	mcntrl_afie = 0x00000002,
-	mcntrl_naie = 0x00000004,
-	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
-	mcntrl_tffie = 0x00000080,
-	mcntrl_reset = 0x00000100,
-	mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
-	rw_bit = 1 << 0,
-	start_bit = 1 << 8,
-	stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
-#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
-#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
-#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
-#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
-#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
-
-#define HCLK_MHZ		13
-#define I2C_CHIP_NAME		"PNX4008-I2C"
-
-#endif				/* __ASM_ARCH_I2C_H___ */
diff --git a/include/asm-arm/arch-pnx4008/io.h b/include/asm-arm/arch-pnx4008/io.h
deleted file mode 100644
index 29ee43955c52..000000000000
--- a/include/asm-arm/arch-pnx4008/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-
-/*
- *  include/asm-arm/arch-pnx4008/io.h
- *
- * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/irq.h b/include/asm-arm/arch-pnx4008/irq.h
deleted file mode 100644
index fabff5dc337f..000000000000
--- a/include/asm-arm/arch-pnx4008/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h
deleted file mode 100644
index 13ec7ed0f501..000000000000
--- a/include/asm-arm/arch-pnx4008/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS         96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT   64
-
-#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
-#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
-#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
-#define GPI_06_INT         92
-#define GPI_05_INT         91
-#define GPI_04_INT         90
-#define GPI_03_INT         89
-#define GPI_02_INT         88
-#define GPI_01_INT         87
-#define GPI_00_INT         86
-#define BT_CLKREQ_INT      85
-#define SPI1_DATIN_INT     84
-#define U5_RX_INT          83
-#define SDIO_INT_N         82
-#define CAM_HS_INT         81
-#define CAM_VS_INT         80
-#define GPI_07_INT         79
-#define DISP_SYNC_INT      78
-#define DSP_INT8           77
-#define U7_HCTS_INT        76
-#define GPI_10_INT         75
-#define GPI_09_INT         74
-#define GPI_08_INT         73
-#define DSP_INT7           72
-#define U2_HCTS_INT        71
-#define SPI2_DATIN_INT     70
-#define GPIO_05_INT        69
-#define GPIO_04_INT        68
-#define GPIO_03_INT        67
-#define GPIO_02_INT        66
-#define GPIO_01_INT        65
-#define GPIO_00_INT        64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT   32
-
-#define USB_I2C_INT        63
-#define USB_DEV_HP_INT     62
-#define USB_DEV_LP_INT     61
-#define USB_DEV_DMA_INT    60
-#define USB_HOST_INT       59
-#define USB_OTG_ATX_INT_N  58
-#define USB_OTG_TIMER_INT  57
-#define SW_INT             56
-#define SPI1_INT           55
-#define KEY_IRQ            54
-#define DSP_M_INT          53
-#define RTC_INT            52
-#define I2C_1_INT          51
-#define I2C_2_INT          50
-#define PLL1_LOCK_INT      49
-#define PLL2_LOCK_INT      48
-#define PLL3_LOCK_INT      47
-#define PLL4_LOCK_INT      46
-#define PLL5_LOCK_INT      45
-#define SPI2_INT           44
-#define DSP_INT1           43
-#define DSP_INT2           42
-#define DSP_TDM_INT2       41
-#define TS_AUX_INT         40
-#define TS_IRQ             39
-#define TS_P_INT           38
-#define UOUT1_TO_PAD_INT   37
-#define GPI_11_INT         36
-#define DSP_INT4           35
-#define JTAG_COMM_RX_INT   34
-#define JTAG_COMM_TX_INT   33
-#define DSP_INT3           32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT   0
-
-#define SUB2_FIQ_N         31	/*active low */
-#define SUB1_FIQ_N         30	/*active low */
-#define JPEG_INT           29
-#define DMA_INT            28
-#define MSTIMER_INT        27
-#define IIR1_INT           26
-#define IIR2_INT           25
-#define IIR7_INT           24
-#define DSP_TDM_INT0       23
-#define DSP_TDM_INT1       22
-#define DSP_P_INT          21
-#define DSP_INT0           20
-#define DUM_INT            19
-#define UOUT0_TO_PAD_INT   18
-#define MP4_ENC_INT        17
-#define MP4_DEC_INT        16
-#define SD0_INT            15
-#define MBX_INT            14
-#define SD1_INT            13
-#define MS_INT_N           12
-#define FLASH_INT          11 /*NAND*/
-#define IIR6_INT           10
-#define IIR5_INT           9
-#define IIR4_INT           8
-#define IIR3_INT           7
-#define WATCH_INT          6
-#define HSTIMER_INT        5
-#define ARCH_TIMER_IRQ     HSTIMER_INT
-#define CAM_INT            4
-#define PRNG_INT           3
-#define CRYPTO_INT         2
-#define SUB2_IRQ_N         1	/*active low */
-#define SUB1_IRQ_N         0	/*active low */
-
-#define PNX4008_IRQ_TYPES \
-{                                           /*IRQ #'s: */         \
-IRQT_LOW,  IRQT_LOW,  IRQT_LOW,  IRQT_HIGH, /*  0, 1, 2, 3 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  4, 5, 6, 7 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /*  8, 9,10,11 */     \
-IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 28,29,30,31 */     \
-IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */  \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_LOW,  /* 48,49,50,51 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_LOW,  IRQT_HIGH, /* 56,57,58,59 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */     \
-IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */     \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/include/asm-arm/arch-pnx4008/memory.h b/include/asm-arm/arch-pnx4008/memory.h
deleted file mode 100644
index 0d8268a95261..000000000000
--- a/include/asm-arm/arch-pnx4008/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET     (0x80000000)
-
-#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/param.h b/include/asm-arm/arch-pnx4008/param.h
deleted file mode 100644
index 95d5f547b416..000000000000
--- a/include/asm-arm/arch-pnx4008/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define HZ 100
diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h
deleted file mode 100644
index 2613c7c669b1..000000000000
--- a/include/asm-arm/arch-pnx4008/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE		0x08000000
-#define PNX4008_IRAM_SIZE		0x00010000
-#define PNX4008_YUV_SLAVE_BASE		0x10000000
-#define PNX4008_DUM_SLAVE_BASE		0x18000000
-#define PNX4008_NDF_FLASH_BASE		0x20020000
-#define PNX4008_SPI1_BASE		0x20088000
-#define PNX4008_SPI2_BASE		0x20090000
-#define PNX4008_SD_CONFIG_BASE		0x20098000
-#define PNX4008_FLASH_DATA		0x200B0000
-#define PNX4008_MLC_FLASH_BASE		0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
-#define PNX4008_DMA_CONFIG_BASE		0x31000000
-#define PNX4008_USB_CONFIG_BASE		0x31020000
-#define PNX4008_SDRAM_CFG_BASE		0x31080000
-#define PNX4008_AHB2FAB_BASE		0x40000000
-#define PNX4008_PWRMAN_BASE		0x40004000
-#define PNX4008_INTCTRLMIC_BASE		0x40008000
-#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE	0x40010000
-#define PNX4008_HSUART1_BASE		0x40014000
-#define PNX4008_HSUART2_BASE		0x40018000
-#define PNX4008_HSUART7_BASE		0x4001C000
-#define PNX4008_RTC_BASE		0x40024000
-#define PNX4008_PIO_BASE		0x40028000
-#define PNX4008_MSTIMER_BASE		0x40034000
-#define PNX4008_HSTIMER_BASE		0x40038000
-#define PNX4008_WDOG_BASE		0x4003C000
-#define PNX4008_DEBUG_BASE		0x40040000
-#define PNX4008_TOUCH1_BASE		0x40048000
-#define PNX4008_KEYSCAN_BASE		0x40050000
-#define PNX4008_UARTCTRL_BASE		0x40054000
-#define PNX4008_PWM_BASE		0x4005C000
-#define PNX4008_UART3_BASE		0x40080000
-#define PNX4008_UART4_BASE		0x40088000
-#define PNX4008_UART5_BASE		0x40090000
-#define PNX4008_UART6_BASE		0x40098000
-#define PNX4008_I2C1_BASE		0x400A0000
-#define PNX4008_I2C2_BASE		0x400A8000
-#define PNX4008_MAGICGATE_BASE		0x400B0000
-#define PNX4008_DUMCONF_BASE		0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
-#define PNX4008_DSP_BASE		0x400C0000
-#define PNX4008_PROFCOUNTER_BASE	0x400C8000
-#define PNX4008_CRYPTO_BASE		0x400D0000
-#define PNX4008_CAMIFCONF_BASE		0x400D8000
-#define PNX4008_YUV2RGB_BASE		0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h
deleted file mode 100644
index bac1634cb3e0..000000000000
--- a/include/asm-arm/arch-pnx4008/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif				/* ASSEMBLER */
-#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h
deleted file mode 100644
index 6e3da70ab107..000000000000
--- a/include/asm-arm/arch-pnx4008/system.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pnx4008/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h
deleted file mode 100644
index ee470a39089a..000000000000
--- a/include/asm-arm/arch-pnx4008/timex.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#define CLOCK_TICK_RATE		1000000
-
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
-#endif
diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/include/asm-arm/arch-pnx4008/uncompress.h
deleted file mode 100644
index 8fa4d24b72b4..000000000000
--- a/include/asm-arm/arch-pnx4008/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pnx4008/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
-	while (UART5_FR & (1 << 5))
-		barrier();
-
-	UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/include/asm-arm/arch-pnx4008/vmalloc.h
deleted file mode 100644
index 140d925f6f37..000000000000
--- a/include/asm-arm/arch-pnx4008/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * include/asm-arm/arch-pnx4008/vmalloc.h
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-pxa/akita.h b/include/asm-arm/arch-pxa/akita.h
deleted file mode 100644
index 5d8cc1d9cb10..000000000000
--- a/include/asm-arm/arch-pxa/akita.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Hardware specific definitions for SL-C1000 (Akita)
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/* Akita IO Expander GPIOs */
-
-#define AKITA_IOEXP_RESERVED_7      (1 << 7)
-#define AKITA_IOEXP_IR_ON           (1 << 6)
-#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
-#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
-#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
-#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
-#define AKITA_IOEXP_RESERVED_1      (1 << 1)
-#define AKITA_IOEXP_RESERVED_0      (1 << 0)
-
-/* Direction Bitfield  0=output  1=input */
-#define AKITA_IOEXP_IO_DIR	0
-/* Default Values */
-#define AKITA_IOEXP_IO_OUT	(AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
-
-extern struct platform_device akitaioexp_device;
-
-void akita_set_ioexp(struct device *dev, unsigned char bitmask);
-void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
-
diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h
deleted file mode 100644
index f82f96dd1053..000000000000
--- a/include/asm-arm/arch-pxa/audio.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_ARCH_AUDIO_H__
-#define __ASM_ARCH_AUDIO_H__
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-
-typedef struct {
-	int (*startup)(struct snd_pcm_substream *, void *);
-	void (*shutdown)(struct snd_pcm_substream *, void *);
-	void (*suspend)(void *);
-	void (*resume)(void *);
-	void *priv;
-} pxa2xx_audio_ops_t;
-
-extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
-
-#endif
diff --git a/include/asm-arm/arch-pxa/bitfield.h b/include/asm-arm/arch-pxa/bitfield.h
deleted file mode 100644
index f1f0e3387d9c..000000000000
--- a/include/asm-arm/arch-pxa/bitfield.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/include/asm-arm/arch-pxa/camera.h b/include/asm-arm/arch-pxa/camera.h
deleted file mode 100644
index 39516ced8b1f..000000000000
--- a/include/asm-arm/arch-pxa/camera.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-    camera.h - PXA camera driver header file
-
-    Copyright (C) 2003, Intel Corporation
-    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define PXA_CAMERA_MASTER	1
-#define PXA_CAMERA_DATAWIDTH_4	2
-#define PXA_CAMERA_DATAWIDTH_5	4
-#define PXA_CAMERA_DATAWIDTH_8	8
-#define PXA_CAMERA_DATAWIDTH_9	0x10
-#define PXA_CAMERA_DATAWIDTH_10	0x20
-#define PXA_CAMERA_PCLK_EN	0x40
-#define PXA_CAMERA_MCLK_EN	0x80
-#define PXA_CAMERA_PCP		0x100
-#define PXA_CAMERA_HSP		0x200
-#define PXA_CAMERA_VSP		0x400
-
-struct pxacamera_platform_data {
-	int (*init)(struct device *);
-	int (*power)(struct device *, int);
-	int (*reset)(struct device *, int);
-
-	unsigned long flags;
-	unsigned long mclk_10khz;
-};
-
-extern void pxa_set_camera_info(struct pxacamera_platform_data *);
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
deleted file mode 100644
index f8fac9e18009..000000000000
--- a/include/asm-arm/arch-pxa/cm-x270.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm/arch-pxa/cm-x270.h
- *
- * Copyright Compulab Ltd., 2003, 2007
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* CM-x270 device physical addresses */
-#define CMX270_CS1_PHYS		(PXA_CS1_PHYS)
-#define MARATHON_PHYS		(PXA_CS2_PHYS)
-#define CMX270_IDE104_PHYS	(PXA_CS3_PHYS)
-#define CMX270_IT8152_PHYS	(PXA_CS4_PHYS)
-
-/* Statically mapped regions */
-#define CMX270_VIRT_BASE		(0xe8000000)
-#define CMX270_IT8152_VIRT		(CMX270_VIRT_BASE)
-#define CMX270_IDE104_VIRT		(CMX270_IT8152_VIRT + SZ_64M)
-
-/* GPIO related definitions */
-#define GPIO_IT8152_IRQ			(22)
-
-#define IRQ_GPIO_IT8152_IRQ	IRQ_GPIO(GPIO_IT8152_IRQ)
-#define PME_IRQ			IRQ_GPIO(0)
-#define CMX270_IDE_IRQ		IRQ_GPIO(100)
-#define CMX270_GPIRQ1		IRQ_GPIO(101)
-#define CMX270_TOUCHIRQ		IRQ_GPIO(96)
-#define CMX270_ETHIRQ		IRQ_GPIO(10)
-#define CMX270_GFXIRQ		IRQ_GPIO(95)
-#define CMX270_NANDIRQ		IRQ_GPIO(89)
-#define CMX270_MMC_IRQ		IRQ_GPIO(83)
-
-/* PCMCIA related definitions */
-#define PCC_DETECT(x)	(GPLR(84 - (x)) & GPIO_bit(84 - (x)))
-#define PCC_READY(x)	(GPLR(82 - (x)) & GPIO_bit(82 - (x)))
-
-#define PCMCIA_S0_CD_VALID		IRQ_GPIO(84)
-#define PCMCIA_S0_CD_VALID_EDGE		GPIO_BOTH_EDGES
-
-#define PCMCIA_S1_CD_VALID		IRQ_GPIO(83)
-#define PCMCIA_S1_CD_VALID_EDGE		GPIO_BOTH_EDGES
-
-#define PCMCIA_S0_RDYINT		IRQ_GPIO(82)
-#define PCMCIA_S1_RDYINT		IRQ_GPIO(81)
-
-#define PCMCIA_RESET_GPIO		53
diff --git a/include/asm-arm/arch-pxa/colibri.h b/include/asm-arm/arch-pxa/colibri.h
deleted file mode 100644
index 2ae373fb5675..000000000000
--- a/include/asm-arm/arch-pxa/colibri.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _COLIBRI_H_
-#define _COLIBRI_H_
-
-/* physical memory regions */
-#define COLIBRI_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
-#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-/* virtual memory regions */
-#define COLIBRI_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-/* size of flash */
-#define COLIBRI_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		114
-#define COLIBRI_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
-
-#endif /* _COLIBRI_H_ */
diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h
deleted file mode 100644
index bf856503baf6..000000000000
--- a/include/asm-arm/arch-pxa/corgi.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Hardware specific definitions for SL-C7xx series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_CORGI_H
-#define __ASM_ARCH_CORGI_H  1
-
-
-/*
- * Corgi (Non Standard) GPIO Definitions
- */
-#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
-#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
-#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
-#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
-#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
-#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
-#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
-#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
-#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
-#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
-#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
-#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
-#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
-#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
-#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
-#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transciever */
-#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
-#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
-#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
-#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
-#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
-#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
-#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
-
-
-/*
- * Corgi Keyboard Definitions
- */
-#define CORGI_KEY_STROBE_NUM		(12)
-#define CORGI_KEY_SENSE_NUM			(8)
-#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-
-
-/*
- * Corgi Interrupts
- */
-#define CORGI_IRQ_GPIO_KEY_INT		IRQ_GPIO(0)
-#define CORGI_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
-#define CORGI_IRQ_GPIO_WAKEUP		IRQ_GPIO(3)
-#define CORGI_IRQ_GPIO_AK_INT		IRQ_GPIO(4)
-#define CORGI_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
-#define CORGI_IRQ_GPIO_nSD_INT		IRQ_GPIO(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(11)
-#define CORGI_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL	IRQ_GPIO(16)	/* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)	IRQ_GPIO(58+(a))	/* Keyboard Sense lines */
-
-
-/*
- * Corgi SCOOP GPIOs and Config
- */
-#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
-#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
-#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
-#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
-#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
-#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
-#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
-#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
-#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
-
-#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
-			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
-			CORGI_SCP_MIC_BIAS )
-#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-
-
-/*
- * Shared data structures
- */
-extern struct platform_device corgiscoop_device;
-extern struct platform_device corgissp_device;
-
-#endif /* __ASM_ARCH_CORGI_H  */
-
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
deleted file mode 100644
index 9012cbc0ad8b..000000000000
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-pxa/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x40000000		@ physical
-		movne	\rx, #io_p2v(0x40000000)	@ virtual
-		orr	\rx, \rx, #0x00100000
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
deleted file mode 100644
index dbe110ee2666..000000000000
--- a/include/asm-arm/arch-pxa/dma.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/dma.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
-#endif
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S
deleted file mode 100644
index c145bb01bc8f..000000000000
--- a/include/asm-arm/arch-pxa/entry-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/entry-macro.S
- *
- * Low-level IRQ helper macros for PXA-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-		mov	\tmp, \tmp, lsr #13
-		and	\tmp, \tmp, #0x7		@ Core G
-		cmp	\tmp, #1
-		bhi	1004f
-
-		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
-		add	\base, \base, #0x00d00000
-		ldr	\irqstat, [\base, #0]		@ ICIP
-		ldr	\irqnr, [\base, #4]		@ ICMR
-		b	1002f
-
-1004:
-		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
-		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1003f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #32
-		b	1001f
-1003:
-		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
-		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
-1002:
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1001f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-1001:
-		.endm
diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h
deleted file mode 100644
index bdbf5f9ffdd5..000000000000
--- a/include/asm-arm/arch-pxa/gpio.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm/arch/pxa-regs.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm-generic/gpio.h>
-
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
- */
-#define NR_BUILTIN_GPIO 128
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
-		return GPLR(gpio) & GPIO_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
-		if (value)
-			GPSR(gpio) = GPIO_bit(gpio);
-		else
-			GPCR(gpio) = GPIO_bit(gpio);
-	} else {
-		__gpio_set_value(gpio, value);
-	}
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
-#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
-
-
-#endif
diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h
deleted file mode 100644
index 6fa85c4f94f8..000000000000
--- a/include/asm-arm/arch-pxa/gumstix.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/gumstix.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* BTRESET - Reset line to Bluetooth module, active low signal. */
-#define GPIO_GUMSTIX_BTRESET          7
-#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
-
-
-/*
-GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
-this moves to GPIO17 and GPIO37. */
-
-/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
-has detected a cable insertion; driven low otherwise. */
-
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn		81
-#define GPIO_GUMSTIX_USB_GPIOx		83
-
-#else
-
-#define GPIO_GUMSTIX_USB_GPIOn		35
-#define GPIO_GUMSTIX_USB_GPIOx		41
-
-#endif
-
-/* usb state change */
-#define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
-
-#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
-#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
-#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
-
-/*
- * SD/MMC definitions
- */
-#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
-#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
-
-/*
- * SMC Ethernet definitions
- * ETH_RST provides a hardware reset line to the ethernet chip
- * ETH is the IRQ line in from the ethernet chip to the PXA
- */
-#define GPIO_GUMSTIX_ETH0_RST		80
-#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-#define GPIO_GUMSTIX_ETH1_RST		52
-#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
-
-#define GPIO_GUMSTIX_ETH0		36
-#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH0)
-#define GPIO_GUMSTIX_ETH1		27
-#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH1)
-
-
-/* CF reset line */
-#define GPIO8_RESET			8
-
-/* CF slot 0 */
-#define GPIO4_nBVD1			4
-#define GPIO4_nSTSCHG			GPIO4_nBVD1
-#define GPIO11_nCD			11
-#define GPIO26_PRDY_nBSY		26
-#define GUMSTIX_S0_nSTSCHG_IRQ		IRQ_GPIO(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ		IRQ_GPIO(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO26_PRDY_nBSY)
-
-/* CF slot 1 */
-#define GPIO18_nBVD1			18
-#define GPIO18_nSTSCHG			GPIO18_nBVD1
-#define GPIO36_nCD			36
-#define GPIO27_PRDY_nBSY		27
-#define GUMSTIX_S1_nSTSCHG_IRQ		IRQ_GPIO(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ		IRQ_GPIO(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO27_PRDY_nBSY)
-
-/* CF GPIO line modes */
-#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
-#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
-#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
-#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
-#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
-#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
-#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
deleted file mode 100644
index d9af6dabc899..000000000000
--- a/include/asm-arm/arch-pxa/hardware.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * We requires absolute addresses.
- */
-#define PCIO_BASE		0
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xff000000
-#define UNCACHED_ADDR		UNCACHED_PHYS_0
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
-   especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)	\
-	(*(volatile u32 *)((u32)&__REG(x) + (y)))
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xf3f;	\
-		_id == 0x212;				\
-	})
-
-#define __cpu_is_pxa25x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x2d0 || _id == 0x290;		\
-	})
-#else
-#define __cpu_is_pxa21x(id)	(0)
-#define __cpu_is_pxa25x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x411;				\
-	})
-#else
-#define __cpu_is_pxa27x(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x688;				\
-	 })
-#else
-#define __cpu_is_pxa300(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x689;				\
-	 })
-#else
-#define __cpu_is_pxa310(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x603 || _id == 0x682;		\
-	 })
-#else
-#define __cpu_is_pxa320(id)	(0)
-#endif
-
-#define cpu_is_pxa21x()					\
-	({						\
-		__cpu_is_pxa21x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa25x()					\
-	({						\
-		__cpu_is_pxa25x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa27x()					\
-	({						\
-		__cpu_is_pxa27x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa300()					\
-	({						\
-		__cpu_is_pxa300(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa310()					\
-	({						\
-		__cpu_is_pxa310(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa320()					\
-	({						\
-		__cpu_is_pxa320(read_cpuid_id());	\
-	 })
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
- */
-#define __cpu_is_pxa2xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id <= 0x2;				\
-	 })
-
-#define __cpu_is_pxa3xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id == 0x3;				\
-	 })
-
-#define cpu_is_pxa2xx()					\
-	({						\
-		__cpu_is_pxa2xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa3xx()					\
-	({						\
-		__cpu_is_pxa3xx(read_cpuid_id());	\
-	 })
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-/*
- * Return GPIO level, nonzero means high, zero is low
- */
-extern int pxa_gpio_get_value(unsigned gpio);
-
-/*
- * Set output GPIO level
- */
-extern void pxa_gpio_set_value(unsigned gpio, int value);
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-#endif
-
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define PCIBIOS_MIN_IO		0
-#define PCIBIOS_MIN_MEM		0
-#define pcibios_assign_all_busses()	1
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h
deleted file mode 100644
index 80596b013443..000000000000
--- a/include/asm-arm/arch-pxa/i2c.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  i2c_pxa.h
- *
- *  Copyright (C) 2002 Intrinsyc Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#ifndef _I2C_PXA_H_
-#define _I2C_PXA_H_
-
-#if 0
-#define DEF_TIMEOUT             3
-#else
-/* need a longer timeout if we're dealing with the fact we may well be
- * looking at a multi-master environment
-*/
-#define DEF_TIMEOUT             32
-#endif
-
-#define BUS_ERROR               (-EREMOTEIO)
-#define XFER_NAKED              (-ECONNREFUSED)
-#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
-
-/* ICR initialize bit values
-*
-*  15. FM       0 (100 Khz operation)
-*  14. UR       0 (No unit reset)
-*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
-*                                       matching its slave address)
-*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
-*                                       in master mode)
-*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
-*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
-*  9.  IRFIE    1 (Enable interrupts from full buffer received)
-*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
-*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
-*  6.  IUE      0 (Disable unit until we change settings)
-*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
-*  4.  MA       0 (Only send stop with the ICR stop bit)
-*  3.  TB       0 (We are not transmitting a byte initially)
-*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
-*  1.  STOP     0 (Do not send a STOP)
-*  0.  START    0 (Do not send a START)
-*
-*/
-#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
-
-/* I2C status register init values
- *
- * 10. BED      1 (Clear bus error detected)
- * 9.  SAD      1 (Clear slave address detected)
- * 7.  IRF      1 (Clear IDBR Receive Full)
- * 6.  ITE      1 (Clear IDBR Transmit Empty)
- * 5.  ALD      1 (Clear Arbitration Loss Detected)
- * 4.  SSD      1 (Clear Slave Stop Detected)
- */
-#define I2C_ISR_INIT	0x7FF  /* status register init */
-
-struct i2c_slave_client;
-
-struct i2c_pxa_platform_data {
-	unsigned int		slave_addr;
-	struct i2c_slave_client	*slave;
-	unsigned int		class;
-	int			use_pio;
-};
-
-extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
-
-#ifdef CONFIG_PXA27x
-extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h
deleted file mode 100644
index b6952534a4e1..000000000000
--- a/include/asm-arm/arch-pxa/idp.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/idp.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- *             Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *             <http://www.vibren.com> <http://bec-systems.com>
- *             Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-
-#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
-#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT	(0xf0000000)
-#define IDP_COREVOLT_SIZE	(1*1024*1024)
-
-#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE		(1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-#  define __CPLD_REG(x)		CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0	(1 << 0)
-#define PCC0_PWR1	(1 << 1)
-#define PCC0_PWR2	(1 << 2)
-#define PCC0_PWR3	(1 << 3)
-#define PCC1_PWR0	(1 << 4)
-#define PCC1_PWR1	(1 << 5)
-#define PCC1_PWR2	(1 << 6)
-#define PCC1_PWR3	(1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET	(1 << 6)
-#define PCC1_RESET	(1 << 7)
-#define PCC0_ENABLE	(1 << 0)
-#define PCC1_ENABLE	(1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
-#define _PCC_RESET	(1 << 6)
-#define _PCC_IRQ	(1 << 5)
-#define _PCC_INPACK	(1 << 4)
-#define PCC_BVD2	(1 << 3)
-#define PCC_BVD1	(1 << 2)
-#define PCC_VS2		(1 << 1)
-#define PCC_VS1		(1 << 0)
-
-#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
-#define IDE_IRQ				IRQ_GPIO(21)
-
-#define TOUCH_PANEL_IRQ_EDGE		IRQT_FALLING
-
-#define ETHERNET_IRQ			IRQ_GPIO(4)
-#define ETHERNET_IRQ_EDGE		IRQT_RISING
-
-#define IDE_IRQ_EDGE			IRQT_RISING
-
-#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQT_BOTHEDGE
-
-#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQT_BOTHEDGE
-
-#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
-#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED	(1<<5)
-#define IDP_BUSY_LED	(1<<6)
-
-#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS	7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
-	IDP_CPLD_KB_COL_LOW = outputs;\
-	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
-	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
deleted file mode 100644
index 7f8d817b446f..000000000000
--- a/include/asm-arm/arch-pxa/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/io.h
- *
- * Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
deleted file mode 100644
index 0a50c3c763df..000000000000
--- a/include/asm-arm/arch-pxa/irda.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF		1
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-
-struct pxaficp_platform_data {
-	int transceiver_cap;
-	void (*transceiver_mode)(struct device *dev, int mode);
-	int (*startup)(struct device *dev);
-	void (*shutdown)(struct device *dev);
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
deleted file mode 100644
index b6c8fe377683..000000000000
--- a/include/asm-arm/arch-pxa/irqs.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/irqs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#define PXA_IRQ(x)	(x)
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
-#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
-#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
-#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
-#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
-#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
-#endif
-
-#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
-#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
-#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
-#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
-#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
-#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
-#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
-#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
-#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
-#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
-#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
-#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
-#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
-#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
-#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
-#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
-#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
-#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
-#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
-#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
-#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
-#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
-#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
-#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
-#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
-#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
-#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
-#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
-#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
-#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
-#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
-#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
-#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
-#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
-#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
-#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
-#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
-#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
-#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
-#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
-#endif
-
-#define PXA_GPIO_IRQ_BASE	(64)
-#define PXA_GPIO_IRQ_NUM	(128)
-
-#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
-
-#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
-#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
- */
-#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
-
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
-      defined(CONFIG_MACH_LOGICPD_PXA270) || \
-      defined(CONFIG_MACH_MAINSTONE) || \
-      defined(CONFIG_MACH_PCM027) || \
-      defined(CONFIG_MACH_MAGICIAN)
-#define NR_IRQS			(IRQ_BOARD_END)
-#else
-#define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-/* ITE8152 irqs */
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/include/asm-arm/arch-pxa/littleton.h b/include/asm-arm/arch-pxa/littleton.h
deleted file mode 100644
index 79d209b826f4..000000000000
--- a/include/asm-arm/arch-pxa/littleton.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
-
-#define LITTLETON_ETH_PHYS	0x30000000
-
-#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h
deleted file mode 100644
index 501d240ac120..000000000000
--- a/include/asm-arm/arch-pxa/lpd270.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/lpd270.h
- *
- * Author:	Lennert Buytenhek
- * Created:	Feb 10, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT	0xf0000000
-#define LPD270_CPLD_SIZE	0x00100000
-
-#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers  */
-#define LPD270_CPLD_REG(x)	((unsigned long)(LPD270_CPLD_VIRT + (x)))
-#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
-#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
-
-
-#endif
diff --git a/include/asm-arm/arch-pxa/lubbock.h b/include/asm-arm/arch-pxa/lubbock.h
deleted file mode 100644
index 11ee73593fc3..000000000000
--- a/include/asm-arm/arch-pxa/lubbock.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/lubbock.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT	(0xf0000000)
-#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
-#else
-#  define __LUB_REG(x)		LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h
deleted file mode 100644
index 169b374f9921..000000000000
--- a/include/asm-arm/arch-pxa/magician.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <asm/arch/irqs.h>
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER		0
-#define GPIO9_MAGICIAN_UNKNOWN			9
-#define GPIO10_MAGICIAN_GSM_IRQ			10
-#define GPIO11_MAGICIAN_GSM_OUT1		11
-#define GPIO13_MAGICIAN_CPLD_IRQ		13
-#define GPIO18_MAGICIAN_UNKNOWN			18
-#define GPIO22_MAGICIAN_VIBRA_EN		22
-#define GPIO26_MAGICIAN_GSM_POWER		26
-#define GPIO27_MAGICIAN_USBC_PUEN		27
-#define GPIO30_MAGICIAN_nCHARGE_EN		30
-#define GPIO37_MAGICIAN_KEY_HANGUP		37
-#define GPIO38_MAGICIAN_KEY_CONTACTS		38
-#define GPIO40_MAGICIAN_GSM_OUT2		40
-#define GPIO48_MAGICIAN_UNKNOWN			48
-#define GPIO56_MAGICIAN_UNKNOWN			56
-#define GPIO57_MAGICIAN_CAM_RESET		57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
-#define GPIO83_MAGICIAN_nIR_EN			83
-#define GPIO86_MAGICIAN_GSM_RESET		86
-#define GPIO87_MAGICIAN_GSM_SELECT		87
-#define GPIO90_MAGICIAN_KEY_CALENDAR		90
-#define GPIO91_MAGICIAN_KEY_CAMERA		91
-#define GPIO93_MAGICIAN_KEY_UP			93
-#define GPIO94_MAGICIAN_KEY_DOWN		94
-#define GPIO95_MAGICIAN_KEY_LEFT		95
-#define GPIO96_MAGICIAN_KEY_RIGHT		96
-#define GPIO97_MAGICIAN_KEY_ENTER		97
-#define GPIO98_MAGICIAN_KEY_RECORD		98
-#define GPIO99_MAGICIAN_HEADPHONE_IN		99
-#define GPIO100_MAGICIAN_KEY_VOL_UP		100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
-#define GPIO102_MAGICIAN_KEY_PHONE		102
-#define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_POWER_1 		104
-#define GPIO105_MAGICIAN_LCD_POWER_2		105
-#define GPIO106_MAGICIAN_LCD_POWER_3		106
-#define GPIO107_MAGICIAN_DS1WM_IRQ		107
-#define GPIO108_MAGICIAN_GSM_READY		108
-#define GPIO114_MAGICIAN_UNKNOWN		114
-#define GPIO115_MAGICIAN_nPEN_IRQ		115
-#define GPIO116_MAGICIAN_nCAM_EN		116
-#define GPIO119_MAGICIAN_UNKNOWN		119
-#define GPIO120_MAGICIAN_UNKNOWN		120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
-#define MAGICIAN_EGPIO(reg,bit) \
-	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h
deleted file mode 100644
index 14c862adcaa1..000000000000
--- a/include/asm-arm/arch-pxa/mainstone.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/mainstone.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-#endif
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
deleted file mode 100644
index bee81d66c184..000000000000
--- a/include/asm-arm/arch-pxa/memory.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/memory.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0xa0000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
- * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
- * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
- * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS	26
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
-			     unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	cmx270_pci_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h
deleted file mode 100644
index 0499323010ba..000000000000
--- a/include/asm-arm/arch-pxa/mfp-pxa25x.h
+++ /dev/null
@@ -1,161 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA25X_H
-#define __ASM_ARCH_MFP_PXA25X_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
-#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
-#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
-#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
-#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
-#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
-
-#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
-
-/* Crystal and Clock Signals */
-#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTC_CLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
-#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
-#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
-#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
-#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
-#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
-#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
-
-/* PC CARD */
-#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
-#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-
-/* FFUART */
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* HWUART */
-#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
-#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
-#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
-#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
-#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
-#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1 */
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-
-/* SSP 2 - NSSP */
-#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
-#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
-#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
-#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
-#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
-#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
-
-/* MMC */
-#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
-#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
-#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
-#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
-#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
-#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
-#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
-#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_ACBIAS	MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-
-#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
deleted file mode 100644
index bc73ab84167c..000000000000
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ /dev/null
@@ -1,433 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA27X_H
-#define __ASM_ARCH_MFP_PXA27X_H
-
-/*
- * NOTE:  for those special-function bidirectional GPIOs, as described
- * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
- * alternative is preserved, the direction is actually selected by the
- * specific controller, and this should work in most cases.
- */
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
-
-/* Crystal and Clock Signals */
-#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
-#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
-#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
-#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
-
-/* OS Timer Signals */
-#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
-#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
-#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
-#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
-#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
-#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
-#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
-#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
-#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
-#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
-#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
-#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
-#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
-#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
-#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
-#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
-#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
-#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
-#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
-#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
-
-/* PC CARD */
-#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
-#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
-#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
-#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
-#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
-#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
-
-/* I2C */
-#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
-#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
-
-/* FFUART */
-#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
-#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
-#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
-#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
-#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
-#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
-#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
-#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
-#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
-#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
-#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
-#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
-#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1/2/3 */
-#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
-#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
-#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
-#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
-#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
-#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
-#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
-#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
-#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
-#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
-#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
-#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
-#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
-#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
-#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
-#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
-
-/* SSP 2 */
-#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
-#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
-#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
-#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
-#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
-#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
-#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
-#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
-#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
-#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
-#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
-#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
-#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
-#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
-#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
-#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
-#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
-#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
-#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
-#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
-#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
-
-/* SSP 3 */
-#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
-#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
-#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
-#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
-#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
-#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
-#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
-#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
-#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
-#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
-#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
-#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
-#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
-
-/* MMC */
-#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
-#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
-#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
-#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
-#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
-#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
-#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
-#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
-
-/* Keypad */
-#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
-#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
-#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
-#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
-#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
-#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
-#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
-#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
-#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
-#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
-#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
-#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
-#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
-#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
-#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
-#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
-#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
-#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
-#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
-#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
-#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
-#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
-#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
-#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
-#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
-#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
-#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
-#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
-#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
-#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
-#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
-#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
-#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
-#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
-
-/* USB P3 */
-#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
-#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
-#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
-#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
-#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
-#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
-#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
-
-/* USB P2 */
-#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
-#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
-#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
-#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
-#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
-#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
-#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
-
-/* USB Host Port 1/2 */
-#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
-#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
-#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
-
-/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
-#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
-#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
-#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
-#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
-#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
-#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
-#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
-#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
-#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
-#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
-#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
-#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
-#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
-#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
-#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
-#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
-#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
-#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
-#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
-#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
-#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
-#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
-#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
-#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
-#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
-#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
-#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
-#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
-#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
-#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
-#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
-#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
-#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
-#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
-#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
-#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
-#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
-
-/* Universal Subscriber ID Interface */
-#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
-#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
-#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
-#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
-#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
-#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
-#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
-#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
-#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
-#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
-
-/* Mobile Scalable Link (MSL) Interface */
-#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
-#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
-#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
-#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
-#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
-#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
-#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
-#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
-#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
-#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
-#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
-#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
-
-/* Memory Stick Host Controller */
-#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
-#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
-#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
-#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-extern int keypad_set_wake(unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h
deleted file mode 100644
index db8d890d237c..000000000000
--- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA2XX_H
-#define __ASM_ARCH_MFP_PXA2XX_H
-
-#include <asm/arch/mfp.h>
-
-/*
- * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
- *
- *  MFP_PIN(x)
- *  MFP_AFx
- *  MFP_LPM_DRIVE_{LOW, HIGH}
- *  MFP_LPM_EDGE_x
- *
- * other MFP_x bit definitions will be ignored
- *
- * and adds the below two bits specifically for pxa2xx:
- *
- * bit     23 - Input/Output (PXA2xx specific)
- * bit     24 - Wakeup Enable(PXA2xx specific)
- */
-
-#define MFP_DIR_IN		(0x0 << 23)
-#define MFP_DIR_OUT		(0x1 << 23)
-#define MFP_DIR_MASK		(0x1 << 23)
-#define MFP_DIR(x)		(((x) >> 23) & 0x1)
-
-#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
-#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
-#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
-#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
-
-/* specifically for enabling wakeup on keypad GPIOs */
-#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
-
-#define MFP_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
-
-/* NOTE:  pins configured as output _must_ provide a low power state,
- * and this state should help to minimize the power dissipation.
- */
-#define MFP_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Common configurations for pxa25x and pxa27x
- *
- * Note: pins configured as GPIO are always initialized to input
- * so not to cause any side effect
- */
-#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
-#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
-
-extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
-extern int gpio_set_wake(unsigned int gpio, unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h
deleted file mode 100644
index bb410313556f..000000000000
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa300.h
- *
- * PXA300/PXA310 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA300_H
-#define __ASM_ARCH_MFP_PXA300_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#ifdef CONFIG_CPU_PXA310
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#endif
-
-/* Chip Select */
-#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
-
-/* AC97 */
-#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
-#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
-#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
-#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
-#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
-#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
-#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
-#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
-#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
-
-/* I2C */
-#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
-#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
-#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
-#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
-#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
-#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
-#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
-#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
-#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
-#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
-#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
-#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
-#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
-
-/* KEYPAD */
-#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
-#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
-#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
-#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
-#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
-#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
-#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
-#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
-#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
-#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
-#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
-#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
-
-#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
-#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
-#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
-#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
-#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
-#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
-#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
-#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
-#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
-#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
-#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
-#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
-
-#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
-#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
-#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
-#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
-#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
-#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
-#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
-#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
-#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
-#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
-#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
-#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
-#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
-#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
-#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
-#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
-#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
-#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
-#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
-#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
-#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
-#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
-#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
-
-#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
-#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
-#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
-
-/* Mini-LCD */
-#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
-#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
-#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
-#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
-#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
-#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
-#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
-#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
-#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
-#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
-
-/* MMC1 */
-#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
-#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
-#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
-#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-
-/* MMC2 */
-#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
-#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
-#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
-#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
-#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
-#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
-#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
-
-/* SSP1 */
-#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
-#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
-#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
-#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
-#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
-#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
-#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
-#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
-#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
-#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
-#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
-#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
-#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
-#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
-#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
-#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
-#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
-#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
-#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
-
-/* SSP2 */
-#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
-#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
-#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
-#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
-#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
-#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
-#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
-#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
-#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
-#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
-#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
-#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
-#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
-#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
-#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
-#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
-#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
-#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
-#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
-#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
-#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
-#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
-#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
-#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
-
-/* SSP3 */
-#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
-#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
-#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
-#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
-#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
-#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
-#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
-#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
-
-/* SSP4 */
-#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
-#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
-#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
-#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
-
-/* UART1 */
-#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
-#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
-#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
-#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
-#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
-
-#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
-#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
-#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
-#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
-#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-
-#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
-#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
-#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
-#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
-
-#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
-#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
-#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
-#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-
-#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
-#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
-#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-
-#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
-#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
-#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
-#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
-#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
-#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
-#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
-#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
-#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
-#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
-
-#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
-#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
-#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
-#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
-#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
-#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
-
-/* UART2 */
-#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
-#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
-#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-
-#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
-#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
-#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
-#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
-#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
-#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
-
-#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
-#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
-#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
-#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
-#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
-#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
-#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-
-#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
-#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
-#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
-#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
-#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-
-#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
-#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
-#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
-#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
-#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-
-/* USB Host */
-#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
-#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
-
-/* USB P3 */
-#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
-#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
-#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
-#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
-#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
-#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
-
-/* PWM */
-#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
-#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
-#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
-#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
-
-/* CIR */
-#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
-#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
-
-#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
-#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
-
-#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
-#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
-#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
-#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
-#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
-#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
-#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
-#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
-#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
-#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
-
-#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
-
-#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
-#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
-#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
-#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
-
-#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
-#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
-#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
-
-/*
- * PXA300 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA300
-#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
-#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
-#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
-#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
-#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
-#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
-#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
-#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
-#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
-#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
-#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
-
-/* U2D UTMI */
-#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
-#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
-#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
-#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
-#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
-#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
-#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
-#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
-#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
-#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
-#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
-#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
-#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
-#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
-#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
-#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
-#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
-#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
-#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
-#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
-#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
-#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
-#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
-#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
-#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
-#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
-#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
-#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
-#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
-#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
-#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
-#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
-#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
-#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
-#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
-#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
-#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
-#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
-#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
-#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
-#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
-#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
-#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
-#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
-#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
-#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
-#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
-#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
-#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
-#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
-#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
-#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
-#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
-#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
-#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
-#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
-#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
-#endif /* CONFIG_CPU_PXA300 */
-
-/*
- * PXA310 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA310
-/* USB P2 */
-#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
-#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
-#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
-#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
-#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
-#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
-
-/* MMC1 */
-#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
-#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
-
-/* MMC3 */
-#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
-#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
-#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
-#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
-#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
-#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
-#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
-
-/* ULPI */
-#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
-#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
-#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
-#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
-#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
-#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
-#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
-#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
-#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
-#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
-
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
-#endif /* CONFIG_CPU_PXA310 */
-
-#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h
deleted file mode 100644
index 576aa46d90fc..000000000000
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp-pxa320.h
- *
- * PXA320 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA320_H
-#define __ASM_ARCH_MFP_PXA320_H
-
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
-#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
-#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
-#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
-#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
-
-/* Chip Select */
-#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
-
-/* AC97 */
-#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
-#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
-#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
-#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
-#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
-#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
-#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
-#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
-#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
-#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
-#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
-
-/* I2C */
-#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
-#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
-#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
-#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
-#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
-#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
-#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
-#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
-#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
-#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
-#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
-#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
-#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
-#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
-#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
-
-#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
-
-#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
-#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
-#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
-#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
-#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
-#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
-#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
-#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
-
-#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
-#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
-#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
-
-#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
-#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
-#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-
-#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
-#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
-
-#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-
-#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-
-#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
-#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
-
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
-#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
-#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
-#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
-#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
-#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
-#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
-#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
-#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
-#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
-#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
-#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
-#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
-#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
-#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
-#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
-#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
-
-#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
-#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
-#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
-#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
-#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
-#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
-#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
-#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
-#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
-#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
-#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
-#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
-#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
-#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
-
-/* MMC1 */
-#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
-#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
-#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
-#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
-#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
-#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
-#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
-#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
-
-#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
-#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
-#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
-#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
-#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-
-#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
-#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
-#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
-#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
-#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
-#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
-#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
-#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
-#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-
-/* 1-Wire */
-#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
-#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-
-/* SSP1 */
-#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
-#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
-#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
-#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
-#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
-#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
-#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
-
-/* SSP2 */
-#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
-#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
-#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
-#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
-#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
-#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
-#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
-#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
-#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
-
-#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
-#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
-#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
-#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
-#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
-#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
-
-#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
-#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
-#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
-#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
-#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
-
-/* UART1 */
-#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
-#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
-#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
-#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
-#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
-#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
-#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
-#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
-#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
-#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
-#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
-#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
-#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
-#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
-#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
-#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-/* UART2 */
-#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
-#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
-#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
-#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
-#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
-#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
-#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
-#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
-#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
-#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
-#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
-#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
-#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
-#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
-#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-
-/* USB 2.0 UTMI */
-#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
-#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
-#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
-#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
-#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
-#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
-#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
-#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
-#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
-#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
-#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
-#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
-#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
-#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
-#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
-#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
-#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
-#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
-
-#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
-#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
-#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
-#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
-#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
-#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
-#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
-#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
-
-#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
-#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
-#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
-#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
-#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
-#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
-#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
-#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
-
-#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
-#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
-#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
-
-#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
-#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
-#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
-#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
-
-#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
-#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
-#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
-
-#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
-#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
-#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
-
-#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
-#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
-#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
-
-#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
-#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
-#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
-
-#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
-#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
-#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
-
-/* USB Host 1.1 */
-#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
-#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
-
-/* USB P2 */
-#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
-#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
-#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
-#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
-#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
-#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
-#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
-#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
-#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
-
-/* USB P3 */
-#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
-#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
-#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
-#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
-#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
-#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
-
-#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
-#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
-
-#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
-#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
-
-#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
-#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
-#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
-#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
-
-#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/include/asm-arm/arch-pxa/mfp-pxa3xx.h
deleted file mode 100644
index 1f6b35c015d0..000000000000
--- a/include/asm-arm/arch-pxa/mfp-pxa3xx.h
+++ /dev/null
@@ -1,252 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA3XX_H
-#define __ASM_ARCH_MFP_PXA3XX_H
-
-#define MFPR_BASE	(0x40e10000)
-#define MFPR_SIZE	(PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL		(0x1 << 15)
-#define MFPR_PULLUP_EN		(0x1 << 14)
-#define MFPR_PULLDOWN_EN	(0x1 << 13)
-#define MFPR_SLEEP_SEL		(0x1 << 9)
-#define MFPR_SLEEP_OE_N		(0x1 << 7)
-#define MFPR_EDGE_CLEAR		(0x1 << 6)
-#define MFPR_EDGE_FALL_EN	(0x1 << 5)
-#define MFPR_EDGE_RISE_EN	(0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x)	((x) << 8)
-#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
-
-#define MFPR_EDGE_NONE		(0)
-#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
- *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
- *
- * Input            0          X(0)        X(0)        X(0)       0
- * Drive 0          0          0           0           X(1)       0
- * Drive 1          0          1           X(1)        0	  0
- * Pull hi (1)      1          X(1)        1           0	  0
- * Pull lo (0)      1          X(0)        0           1	  0
- * Z (float)        1          X(0)        0           0	  0
- */
-#define MFPR_LPM_INPUT		(0)
-#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK		(0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior,  the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition       pull_sel  pullup_en  pulldown_en
- * MFPR_PULL_NONE       0         0        0
- * MFPR_PULL_LOW        1         0        1
- * MFPR_PULL_HIGH       1         1        0
- * MFPR_PULL_BOTH       1         1        1
- */
-#define MFPR_PULL_NONE		(0)
-#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
-
-/* PXA3xx common MFP configurations - processor specific ones defined
- * in mfp-pxa300.h and mfp-pxa320.h
- */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO		MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO		MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO		MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO		MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO		MFP_CFG(GPIO127, AF0)
-
-#define GPIO0_2_GPIO		MFP_CFG(GPIO0_2, AF0)
-#define GPIO1_2_GPIO		MFP_CFG(GPIO1_2, AF0)
-#define GPIO2_2_GPIO		MFP_CFG(GPIO2_2, AF0)
-#define GPIO3_2_GPIO		MFP_CFG(GPIO3_2, AF0)
-#define GPIO4_2_GPIO		MFP_CFG(GPIO4_2, AF0)
-#define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
-#define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
-
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by pxa3xx_mfp_init_addr()
- *
- * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
- * structure, which represents a range of MFP pins from "start" to
- * "end", with the offset begining at "offset", to define a single
- * pin, let "end" = -1
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR()   to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct pxa3xx_mfp_addr_map {
-	unsigned int	start;
-	unsigned int	end;
-	unsigned long	offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
-	{ MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
-	{ MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
-
-/*
- * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
- * to the MFPR register
- */
-unsigned long pxa3xx_mfp_read(int mfp);
-void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
-
-/*
- * pxa3xx_mfp_config - configure the MFPR registers
- *
- * used by board specific initialization code
- */
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
-
-/*
- * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
- * index and MFPR register offset
- *
- * used by processor specific code
- */
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
-void __init pxa3xx_init_mfp(void);
-#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
deleted file mode 100644
index 02f6157396d3..000000000000
--- a/include/asm-arm/arch-pxa/mfp.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/mfp.h
- *
- * Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-#define mfp_to_gpio(m)	((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_INPUT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-
-#endif /* __ASM_ARCH_MFP_H */
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
deleted file mode 100644
index 6d1304c9270f..000000000000
--- a/include/asm-arm/arch-pxa/mmc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-struct pxamci_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	unsigned long detect_delay;		/* delay in jiffies before detecting cards after interrupt */
-	int (*init)(struct device *, irq_handler_t , void *);
-	int (*get_ro)(struct device *);
-	void (*setpower)(struct device *, unsigned int);
-	void (*exit)(struct device *, void *);
-};
-
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
-
-#endif
diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/include/asm-arm/arch-pxa/mtd-xip.h
deleted file mode 100644
index 8704dbceb432..000000000000
--- a/include/asm-arm/arch-pxa/mtd-xip.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <asm/arch/pxa-regs.h>
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-pxa/ohci.h b/include/asm-arm/arch-pxa/ohci.h
deleted file mode 100644
index e848a47128cd..000000000000
--- a/include/asm-arm/arch-pxa/ohci.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef ASMARM_ARCH_OHCI_H
-#define ASMARM_ARCH_OHCI_H
-
-struct device;
-
-struct pxaohci_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-
-	int port_mode;
-#define PMM_NPS_MODE           1
-#define PMM_GLOBAL_MODE        2
-#define PMM_PERPORT_MODE       3
-
-	int power_budget;
-};
-
-extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h
deleted file mode 100644
index 7beae1472c3e..000000000000
--- a/include/asm-arm/arch-pxa/pcm027.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC		0x51	/* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM	0x54	/* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS		PXA_CS5_PHYS
-#define PCM027_ETH_SIZE		(1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS		0x22000000
-#define PCM027_CAN_SIZE		0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS		24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS	0x00000000
-#define PCM027_FLASH_SIZE	0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU		90
-#define PCM027_LED_HEARD_BEAT	91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h
deleted file mode 100644
index b699d0d7bdb2..000000000000
--- a/include/asm-arm/arch-pxa/pcm990_baseboard.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * include/asm-arm/arch-pxa/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <asm/arch/pcm027.h>
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQT_RISING
-#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_BASE		0xea000000
-#define PCM990_CTRL_SIZE		(1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQT_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
-#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
-#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
-#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
-
-#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
-#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
-#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
-
-#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
-#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
-
-#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
-
-#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
-#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
-#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
-#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
-#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
-#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
-#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
-#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
-
-#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __PCM990_CTRL_REG(x) \
-		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQT_RISING
-#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
-#define PCM990_IDE_PLD_BASE	0xee000000
-#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
-#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
-#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
-#define PCM990_IDE_RDY		0x0008	/* RDY */
-
-#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
-#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
-#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
-#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-#ifndef __ASSEMBLY__
-# define  __PCM990_IDE_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQT_RISING
-
-#define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQT_RISING
-
-#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-#define PCM990_CF_PLD_BASE	0xef000000
-#define PCM990_CF_PLD_SIZE	(1*1024*1024)
-#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
-#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
-
-#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
-#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
-
-#ifndef __ASSEMBLY__
-#  define  __PCM990_CF_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQT_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQT_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h
deleted file mode 100644
index 261e5bc958db..000000000000
--- a/include/asm-arm/arch-pxa/pm.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/suspend.h>
-
-struct pxa_cpu_pm_fns {
-	int	save_count;
-	void	(*save)(unsigned long *);
-	void	(*restore)(unsigned long *);
-	int	(*valid)(suspend_state_t state);
-	void	(*enter)(suspend_state_t state);
-};
-
-extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
-
-/* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int);
-extern void pxa27x_cpu_suspend(unsigned int);
-extern void pxa_cpu_resume(void);
-
-extern int pxa_pm_enter(suspend_state_t state);
diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h
deleted file mode 100644
index 4d6a40315764..000000000000
--- a/include/asm-arm/arch-pxa/poodle.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on:
- *   linux/include/asm-arm/arch-sa1100/collie.h
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H  1
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY		(0)
-#define POODLE_GPIO_AC_IN		(1)
-#define POODLE_GPIO_CO			16
-#define POODLE_GPIO_TP_INT		(5)
-#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
-#define POODLE_GPIO_GA_INT		(10)
-#define POODLE_GPIO_IR_ON		(22)
-#define POODLE_GPIO_HP_IN		(4)
-#define POODLE_GPIO_CF_IRQ		(17)
-#define POODLE_GPIO_CF_CD		(14)
-#define POODLE_GPIO_CF_STSCHG		(14)
-#define POODLE_GPIO_SD_PWR		(33)
-#define POODLE_GPIO_SD_PWR1		(3)
-#define POODLE_GPIO_nSD_CLK		(6)
-#define POODLE_GPIO_nSD_WP		(7)
-#define POODLE_GPIO_nSD_INT		(8)
-#define POODLE_GPIO_nSD_DETECT		(9)
-#define POODLE_GPIO_MAIN_BAT_LOW	(13)
-#define POODLE_GPIO_BAT_COVER		(13)
-#define POODLE_GPIO_USB_PULLUP		(20)
-#define POODLE_GPIO_ADC_TEMP_ON		(21)
-#define POODLE_GPIO_BYPASS_ON		(36)
-#define POODLE_GPIO_CHRG_ON		(38)
-#define POODLE_GPIO_CHRG_FULL		(16)
-#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
-#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
-#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
-#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
-#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
-#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
-#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
-#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
-#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT	( 0 )
-
-extern struct platform_device poodle_locomo_device;
-
-#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
deleted file mode 100644
index dce9308626b7..000000000000
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ /dev/null
@@ -1,1070 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/pxa-regs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS	0x00000000
-#define PXA_CS1_PHYS	0x04000000
-#define PXA_CS2_PHYS	0x08000000
-#define PXA_CS3_PHYS	0x0C000000
-#define PXA_CS4_PHYS	0x10000000
-#define PXA_CS5_PHYS	0x14000000
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
-#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
-#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
-#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
-#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
-
-#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
-#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
-#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
-
-#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
-#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
-#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
-
-#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	(0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
-#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
-                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
-                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
-#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
-#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
-#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
-
-#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
-#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
-#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
-#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
-
-
-
-/*
- * DMA Controller
- */
-
-#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
-#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
-#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
-#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
-#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
-#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
-#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
-#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
-#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
-#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
-#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
-#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
-#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
-#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
-#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
-#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
-
-#define DCSR(x)		__REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#ifdef CONFIG_PXA27x
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-#endif
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
-#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
-
-#define DRCMR(n)	(*(((n) < 64) ? \
-			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
-			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
-#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
-#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23		__REG(0x4000015c)  /* Reserved */
-#define DRCMR24		__REG(0x40000160)  /* Reserved */
-#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29		__REG(0x40000174)  /* Reserved */
-#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34		__REG(0x40000188)  /* Reserved */
-#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39		__REG(0x4000019C)  /* Reserved */
-#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
-#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
-#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
-
-#define DRCMRRXSADR	DRCMR2
-#define DRCMRTXSADR	DRCMR3
-#define DRCMRRXBTRBR	DRCMR4
-#define DRCMRTXBTTHR	DRCMR5
-#define DRCMRRXFFRBR	DRCMR6
-#define DRCMRTXFFTHR	DRCMR7
-#define DRCMRRXMCDR	DRCMR8
-#define DRCMRRXMODR	DRCMR9
-#define DRCMRTXMODR	DRCMR10
-#define DRCMRRXPCDR	DRCMR11
-#define DRCMRTXPCDR	DRCMR12
-#define DRCMRRXSSDR	DRCMR13
-#define DRCMRTXSSDR	DRCMR14
-#define DRCMRRXSS2DR   DRCMR15
-#define DRCMRTXSS2DR   DRCMR16
-#define DRCMRRXICDR	DRCMR17
-#define DRCMRTXICDR	DRCMR18
-#define DRCMRRXSTRBR	DRCMR19
-#define DRCMRTXSTTHR	DRCMR20
-#define DRCMRRXMMC	DRCMR21
-#define DRCMRTXMMC	DRCMR22
-#define DRCMRRXSS3DR   DRCMR66
-#define DRCMRTXSS3DR   DRCMR67
-#define DRCMRUDC(x)	DRCMR((x) + 24)
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
-#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
-#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
-#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
-#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
-#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
-#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
-#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
-#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
-#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
-#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
-#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
-#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
-#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
-#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
-#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
-#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
-#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
-#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
-#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
-#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
-#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
-#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
-#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
-#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
-#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
-#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
-#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
-#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
-#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
-#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
-#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
-#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
-#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
-#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
-#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
-#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
-#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
-#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
-#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
-#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
-#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
-#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
-#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
-#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
-#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
-#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
-#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
-
-#define DDADR(x)	__REG2(0x40000200, (x) << 4)
-#define DSADR(x)	__REG2(0x40000204, (x) << 4)
-#define DTADR(x)	__REG2(0x40000208, (x) << 4)
-#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-
-/*
- * I2C registers
- */
-
-#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
-#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
-#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
-#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
-#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
-#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START	(1 << 0)	   /* start bit */
-#define ICR_STOP	(1 << 1)	   /* stop bit */
-#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
-#define ICR_TB		(1 << 3)	   /* transfer byte bit */
-#define ICR_MA		(1 << 4)	   /* master abort */
-#define ICR_SCLE	(1 << 5)	   /* master clock enable */
-#define ICR_IUE		(1 << 6)	   /* unit enable */
-#define ICR_GCD		(1 << 7)	   /* general call disable */
-#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
-#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
-#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
-#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
-#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
-#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
-#define ICR_UR		(1 << 14)	   /* unit reset */
-
-#define ISR_RWM		(1 << 0)	   /* read/write mode */
-#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
-#define ISR_UB		(1 << 2)	   /* unit busy */
-#define ISR_IBB		(1 << 3)	   /* bus busy */
-#define ISR_SSD		(1 << 4)	   /* slave stop detected */
-#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
-#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
-#define ISR_IRF		(1 << 7)	   /* rx buffer full */
-#define ISR_GCAD	(1 << 8)	   /* general call address detected */
-#define ISR_SAD		(1 << 9)	   /* slave address detected */
-#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
-
-
-/*
- * Serial Audio Controller
- */
-
-#define SACR0		__REG(0x40400000)  /* Global Control Register */
-#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
-#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
-#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
-#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
-#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
-#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
-#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
-#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
-#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
-#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
-#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
-
-#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
-#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
-#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
-#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
-#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
-#define SASR0_BSY	(1 << 2)	/* I2S Busy */
-#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
-#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
-
-#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-
-/*
- * Fast Infrared Communication Port
- */
-
-#define FICP		__REG(0x40800000)  /* Start of FICP area */
-#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
-#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
-#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
-#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
-#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
-#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
-
-#define ICCR0_AME	(1 << 7)	/* Address match enable */
-#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
-#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
-#define ICCR0_RXE	(1 << 4)	/* Receive enable */
-#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
-#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
-#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
-#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
-
-#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
-#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
-#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
-#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
-#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
-#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
-
-#ifdef CONFIG_PXA27x
-#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
-#endif
-#define ICSR0_FRE	(1 << 5)	/* Framing error */
-#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
-#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
-#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
-#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
-#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
-
-#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
-#define ICSR1_CRE	(1 << 5)	/* CRC error */
-#define ICSR1_EOF	(1 << 4)	/* End of frame */
-#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
-#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
-#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
-#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
-
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
-#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0		__REG(0x40A00000)  /* */
-#define OSMR1		__REG(0x40A00004)  /* */
-#define OSMR2		__REG(0x40A00008)  /* */
-#define OSMR3		__REG(0x40A0000C)  /* */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
-#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
-#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
-#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
-
-#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
-
-#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
-#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
-#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
-#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
-
-
-/*
- * Pulse Width Modulator
- */
-
-#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
-#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
-
-#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
-#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
-#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
-#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
-#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
-#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
-#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
-
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
-/*
- * General Purpose I/O
- */
-
-#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET	0x00
-#define GPDR_OFFSET	0x0C
-#define GPSR_OFFSET	0x18
-#define GPCR_OFFSET	0x24
-#define GRER_OFFSET	0x30
-#define GFER_OFFSET	0x3C
-#define GEDR_OFFSET	0x48
-
-#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros.  The argument is a literal GPIO number. */
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/* Interrupt Controller */
-
-#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
-			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
-/*
- * Power Manager - see pxa2xx-regs.h
- */
-
-/*
- * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
- */
-
-/*
- * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
- */
-
-/*
- * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
- */
-
-#ifdef CONFIG_PXA27x
-
-/* Camera Interface */
-#define CICR0		__REG(0x50000000)
-#define CICR1		__REG(0x50000004)
-#define CICR2		__REG(0x50000008)
-#define CICR3		__REG(0x5000000C)
-#define CICR4		__REG(0x50000010)
-#define CISR		__REG(0x50000014)
-#define CIFR		__REG(0x50000018)
-#define CITOR		__REG(0x5000001C)
-#define CIBR0		__REG(0x50000028)
-#define CIBR1		__REG(0x50000030)
-#define CIBR2		__REG(0x50000038)
-
-#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
-#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
-#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
-#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
-#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
-#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
-#define CICR0_TOM	(1 << 9)	/* Time-out mask */
-#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
-#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
-#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
-#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
-#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
-#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
-#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
-#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
-#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
-
-#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
-#define CICR1_RGBT_CONV	(0x3 << 29)	/* RGBT conversion mask */
-#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
-#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
-#define CICR1_RGB_F	(1 << 11)	/* RGB format */
-#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
-#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
-#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
-#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
-#define CICR1_DW	(0x7 << 0)	/* Data width mask */
-
-#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
-					   wait count mask */
-#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
-					   wait count mask */
-#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
-#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
-					   wait count mask */
-#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
-					   wait count mask */
-
-#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
-					   wait count mask */
-#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
-					   wait count mask */
-#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
-#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
-					   wait count mask */
-#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
-
-#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
-#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
-#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
-#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
-#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
-#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
-#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
-#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
-
-#define CISR_FTO	(1 << 15)	/* FIFO time-out */
-#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
-#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
-#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
-#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
-#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
-#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
-#define CISR_EOL	(1 << 8)	/* End of line */
-#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
-#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
-#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
-#define CISR_SOF	(1 << 4)	/* Start of frame */
-#define CISR_EOF	(1 << 3)	/* End of frame */
-#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
-#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
-#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
-
-#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
-#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
-#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
-#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
-#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
-#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
-#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
-#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
-
-#define SRAM_SIZE		0x40000 /* 4x64K  */
-
-#define SRAM_MEM_PHYS		0x5C000000
-
-#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
-#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
-#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
-
-#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
-#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
-#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
-
-#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
-#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
-#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
-
-#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
-#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
-#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
-
-#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
-#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
-
-#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
-#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
-
-#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
-#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
-
-#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
-#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
-
-#endif
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS	(0x4C000000)
-#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
-
-#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
-#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
-#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
-#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
-
-#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
-#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
-#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
-#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
-#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
-#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
-#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
-#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
-
-#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
-#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
-					   Interrupt Enable*/
-#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
-
-#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
-
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE		0x1
-#define PWRMODE_STANDBY		0x2
-#define PWRMODE_SLEEP		0x3
-#define PWRMODE_DEEPSLEEP	0x7
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h
deleted file mode 100644
index 840305916b6d..000000000000
--- a/include/asm-arm/arch-pxa/pxa25x-udc.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#ifndef _ASM_ARCH_PXA25X_UDC_H
-#define _ASM_ARCH_PXA25X_UDC_H
-
-#ifdef _ASM_ARCH_PXA27X_UDC_H
-#error You can't include both PXA25x and PXA27x UDC support
-#endif
-
-#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
-#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
-#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
-
-#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
-#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
-#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
-#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
-#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
-#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
-#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
-#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
-#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
-#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
-#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
-#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
-#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
-#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
-#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
-#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
-#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
-#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
-#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
-#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
-#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
-#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
-#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
-#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
-
-#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h
deleted file mode 100644
index bc1cf7d0773a..000000000000
--- a/include/asm-arm/arch-pxa/pxa27x-udc.h
+++ /dev/null
@@ -1,257 +0,0 @@
-#ifndef _ASM_ARCH_PXA27X_UDC_H
-#define _ASM_ARCH_PXA27X_UDC_H
-
-#ifdef _ASM_ARCH_PXA25X_UDC_H
-#error You cannot include both PXA25x and PXA27x UDC support
-#endif
-
-#define UDCCR           __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
-#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
-					   Protocol Port Support */
-#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
-					   Support */
-#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
-					   Enable */
-#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
-#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
-#define UDCCR_ACN_S	11
-#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
-#define UDCCR_AIN_S	8
-#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
-					   Setting Number */
-#define UDCCR_AAISN_S	5
-#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
-					   Configuration */
-#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
-					   Error */
-#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
-#define UDCCR_UDA	(1 << 1)	/* UDC Active */
-#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
-
-#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
-#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
-#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
-#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
-#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
-#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
-#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
-
-#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
-#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
-#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
-#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
-#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
-#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
-
-#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
-#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
-					   Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
-					   Falling Edge Interrupt Enable */
-#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
-					   Interrupt Enable */
-
-#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
-#define UP3OCR		  __REG(0x40600024)  /* USB Port 2 Output Control register */
-
-#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
-#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
-#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
-#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
-#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
-#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
-#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
-#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
-#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
-#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
-#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
-#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
-#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS		(1 << 24)	/* Single-Ended Output Select */
-
-#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
-#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
-#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
-#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
-#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
-
-#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
-#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
-#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
-#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
-#define UDCCSR_FST	(1 << 5)	/* Force STALL */
-#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
-#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
-#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
-#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
-
-#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
-#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
-
-#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
-#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
-#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
-#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
-
-#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
-#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
-
-#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
-#define UDCCONR_CN_S	(25)
-#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
-#define UDCCONR_IN_S	(22)
-#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
-#define UDCCONR_AISN_S	(19)
-#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
-#define UDCCONR_EN_S	(15)
-#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
-#define UDCCONR_ET_S	(13)
-#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
-#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
-#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
-#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
-#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
-#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
-#define UDCCONR_MPS_S	(2)
-#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
-#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
-
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDC_FNR_MASK     (0x7ff)
-
-#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
-#define UDC_BCR_MASK    (0x3ff)
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h
deleted file mode 100644
index d5a48a96dea7..000000000000
--- a/include/asm-arm/arch-pxa/pxa27x_keypad.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-#define __ASM_ARCH_PXA27x_KEYPAD_H
-
-#include <linux/input.h>
-
-#define MAX_MATRIX_KEY_ROWS	(8)
-#define MAX_MATRIX_KEY_COLS	(8)
-
-/* pxa3xx keypad platform specific parameters
- *
- * NOTE:
- * 1. direct_key_num indicates the number of keys in the direct keypad
- *    _plus_ the number of rotary-encoder sensor inputs,  this can be
- *    left as 0 if only rotary encoders are enabled,  the driver will
- *    automatically calculate this
- *
- * 2. direct_key_map is the key code map for the direct keys, if rotary
- *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
- *
- * 3. rotary can be either interpreted as a relative input event (e.g.
- *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
- *
- * 4. matrix key and direct key will use the same debounce_interval by
- *    default, which should be sufficient in most cases
- */
-struct pxa27x_keypad_platform_data {
-
-	/* code map for the matrix keys */
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
-
-	/* direct keys */
-	int		direct_key_num;
-	unsigned int	direct_key_map[8];
-
-	/* rotary encoders 0 */
-	int		enable_rotary0;
-	int		rotary0_rel_code;
-	int		rotary0_up_key;
-	int		rotary0_down_key;
-
-	/* rotary encoders 1 */
-	int		enable_rotary1;
-	int		rotary1_rel_code;
-	int		rotary1_up_key;
-	int		rotary1_down_key;
-
-	/* key debounce interval */
-	unsigned int	debounce_interval;
-};
-
-#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
-
-extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
deleted file mode 100644
index 6ef1dd09970b..000000000000
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ /dev/null
@@ -1,368 +0,0 @@
-#ifndef __ASM_ARCH_PXA2XX_GPIO_H
-#define __ASM_ARCH_PXA2XX_GPIO_H
-
-#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
-
-/* GPIO alternate function assignments */
-
-#define GPIO1_RST		1	/* reset */
-#define GPIO6_MMCCLK		6	/* MMC Clock */
-#define GPIO7_48MHz		7	/* 48 MHz clock output */
-#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
-#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
-#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
-#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
-#define GPIO12_32KHz		12	/* 32 kHz out */
-#define GPIO12_CIF_DD_7		12	/* Camera data pin 7 */
-#define GPIO13_MBGNT		13	/* memory controller grant */
-#define GPIO14_MBREQ		14	/* alternate bus master request */
-#define GPIO15_nCS_1		15	/* chip select 1 */
-#define GPIO16_PWM0		16	/* PWM0 output */
-#define GPIO17_PWM1		17	/* PWM1 output */
-#define GPIO17_CIF_DD_6		17	/* Camera data pin 6 */
-#define GPIO18_RDY		18	/* Ext. Bus Ready */
-#define GPIO19_DREQ1		19	/* External DMA Request */
-#define GPIO20_DREQ0		20	/* External DMA Request */
-#define GPIO23_SCLK		23	/* SSP clock */
-#define GPIO23_CIF_MCLK		23	/* Camera Master Clock */
-#define GPIO24_SFRM		24	/* SSP Frame */
-#define GPIO24_CIF_FV		24	/* Camera frame start signal */
-#define GPIO25_STXD		25	/* SSP transmit */
-#define GPIO25_CIF_LV		25	/* Camera line start signal */
-#define GPIO26_SRXD		26	/* SSP receive */
-#define GPIO26_CIF_PCLK		26	/* Camera Pixel Clock */
-#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
-#define GPIO27_CIF_DD_0		27	/* Camera data pin 0 */
-#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
-#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
-#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
-#define GPIO31_SYNC		31	/* AC97/I2S sync */
-#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
-#define GPIO32_SYSCLK		32	/* I2S System Clock */
-#define GPIO32_MMCCLK		32	/* MMC Clock (PXA270) */
-#define GPIO33_nCS_5		33	/* chip select 5 */
-#define GPIO34_FFRXD		34	/* FFUART receive */
-#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
-#define GPIO35_FFCTS		35	/* FFUART Clear to send */
-#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
-#define GPIO37_FFDSR		37	/* FFUART data set ready */
-#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
-#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
-#define GPIO39_FFTXD		39	/* FFUART transmit data */
-#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
-#define GPIO41_FFRTS		41	/* FFUART request to send */
-#define GPIO42_BTRXD		42	/* BTUART receive data */
-#define GPIO42_HWRXD		42	/* HWUART receive data */
-#define GPIO42_CIF_MCLK		42	/* Camera Master Clock */
-#define GPIO43_BTTXD		43	/* BTUART transmit data */
-#define GPIO43_HWTXD		43	/* HWUART transmit data */
-#define GPIO43_CIF_FV		43	/* Camera frame start signal */
-#define GPIO44_BTCTS		44	/* BTUART clear to send */
-#define GPIO44_HWCTS		44	/* HWUART clear to send */
-#define GPIO44_CIF_LV		44	/* Camera line start signal */
-#define GPIO45_BTRTS		45	/* BTUART request to send */
-#define GPIO45_HWRTS		45	/* HWUART request to send */
-#define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
-#define GPIO45_CIF_PCLK		45	/* Camera Pixel Clock */
-#define GPIO46_ICPRXD		46	/* ICP receive data */
-#define GPIO46_STRXD		46	/* STD_UART receive data */
-#define GPIO47_ICPTXD		47	/* ICP transmit data */
-#define GPIO47_STTXD		47	/* STD_UART transmit data */
-#define GPIO47_CIF_DD_0		47	/* Camera data pin 0 */
-#define GPIO48_nPOE		48	/* Output Enable for Card Space */
-#define GPIO48_CIF_DD_5		48	/* Camera data pin 5 */
-#define GPIO49_nPWE		49	/* Write Enable for Card Space */
-#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
-#define GPIO50_CIF_DD_3		50	/* Camera data pin 3 */
-#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
-#define GPIO51_CIF_DD_2		51	/* Camera data pin 2 */
-#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
-#define GPIO52_CIF_DD_4		52	/* Camera data pin 4 */
-#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
-#define GPIO53_MMCCLK		53	/* MMC Clock */
-#define GPIO53_CIF_MCLK		53	/* Camera Master Clock */
-#define GPIO54_MMCCLK		54	/* MMC Clock */
-#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
-#define GPIO54_nPCE_2		54	/* Card Enable for Card Space (PXA27x) */
-#define GPIO54_CIF_PCLK		54	/* Camera Pixel Clock */
-#define GPIO55_nPREG		55	/* Card Address bit 26 */
-#define GPIO55_CIF_DD_1		55	/* Camera data pin 1 */
-#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
-#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
-#define GPIO58_LDD_0		58	/* LCD data pin 0 */
-#define GPIO59_LDD_1		59	/* LCD data pin 1 */
-#define GPIO60_LDD_2		60	/* LCD data pin 2 */
-#define GPIO61_LDD_3		61	/* LCD data pin 3 */
-#define GPIO62_LDD_4		62	/* LCD data pin 4 */
-#define GPIO63_LDD_5		63	/* LCD data pin 5 */
-#define GPIO64_LDD_6		64	/* LCD data pin 6 */
-#define GPIO65_LDD_7		65	/* LCD data pin 7 */
-#define GPIO66_LDD_8		66	/* LCD data pin 8 */
-#define GPIO66_MBREQ		66	/* alternate bus master req */
-#define GPIO67_LDD_9		67	/* LCD data pin 9 */
-#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
-#define GPIO68_LDD_10		68	/* LCD data pin 10 */
-#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
-#define GPIO69_LDD_11		69	/* LCD data pin 11 */
-#define GPIO69_MMCCLK		69	/* MMC_CLK */
-#define GPIO70_LDD_12		70	/* LCD data pin 12 */
-#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
-#define GPIO71_LDD_13		71	/* LCD data pin 13 */
-#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
-#define GPIO72_LDD_14		72	/* LCD data pin 14 */
-#define GPIO72_32kHz		72	/* 32 kHz clock */
-#define GPIO73_LDD_15		73	/* LCD data pin 15 */
-#define GPIO73_MBGNT		73	/* Memory controller grant */
-#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
-#define GPIO75_LCD_LCLK		75	/* LCD line clock */
-#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
-#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
-#define GPIO78_nCS_2		78	/* chip select 2 */
-#define GPIO79_nCS_3		79	/* chip select 3 */
-#define GPIO80_nCS_4		80	/* chip select 4 */
-#define GPIO81_NSCLK		81	/* NSSP clock */
-#define GPIO81_CIF_DD_0		81	/* Camera data pin 0 */
-#define GPIO82_NSFRM		82	/* NSSP Frame */
-#define GPIO82_CIF_DD_5		82	/* Camera data pin 5 */
-#define GPIO83_NSTXD		83	/* NSSP transmit */
-#define GPIO83_CIF_DD_4		83	/* Camera data pin 4 */
-#define GPIO84_NSRXD		84	/* NSSP receive */
-#define GPIO84_CIF_FV		84	/* Camera frame start signal */
-#define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
-#define GPIO85_CIF_LV		85	/* Camera line start signal */
-#define GPIO90_CIF_DD_4		90	/* Camera data pin 4 */
-#define GPIO91_CIF_DD_5		91	/* Camera data pin 5 */
-#define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
-#define GPIO93_CIF_DD_6		93	/* Camera data pin 6 */
-#define GPIO94_CIF_DD_5		94	/* Camera data pin 5 */
-#define GPIO95_CIF_DD_4		95	/* Camera data pin 4 */
-#define GPIO96_FFRXD		96	/* FFUART recieve */
-#define GPIO98_FFRTS		98	/* FFUART request to send */
-#define GPIO98_CIF_DD_0		98	/* Camera data pin 0 */
-#define GPIO99_FFTXD		99	/* FFUART transmit data */
-#define GPIO100_FFCTS		100	/* FFUART Clear to send */
-#define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
-#define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
-#define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
-#define GPIO105_CIF_DD_1	105	/* Camera data pin 1 */
-#define GPIO106_CIF_DD_9	106	/* Camera data pin 9 */
-#define GPIO107_CIF_DD_8	107	/* Camera data pin 8 */
-#define GPIO108_CIF_DD_7	108	/* Camera data pin 7 */
-#define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
-#define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
-#define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
-#define GPIO111_MMCDAT3		111	/* MMC DAT3 (PXA27x) */
-#define GPIO111_MMCCS1		111	/* MMC Chip Select 1 (PXA27x) */
-#define GPIO112_MMCCMD		112	/* MMC CMD (PXA27x) */
-#define GPIO113_I2S_SYSCLK	113	/* I2S System Clock (PXA27x) */
-#define GPIO113_AC97_RESET_N	113	/* AC97 NRESET on (PXA27x) */
-#define GPIO114_CIF_DD_1	114	/* Camera data pin 1 */
-#define GPIO115_CIF_DD_3	115	/* Camera data pin 3 */
-#define GPIO116_CIF_DD_2	116	/* Camera data pin 2 */
-
-/* GPIO alternate function mode & direction */
-
-#define GPIO_IN			0x000
-#define GPIO_OUT		0x080
-#define GPIO_ALT_FN_1_IN	0x100
-#define GPIO_ALT_FN_1_OUT	0x180
-#define GPIO_ALT_FN_2_IN	0x200
-#define GPIO_ALT_FN_2_OUT	0x280
-#define GPIO_ALT_FN_3_IN	0x300
-#define GPIO_ALT_FN_3_OUT	0x380
-#define GPIO_MD_MASK_NR		0x07f
-#define GPIO_MD_MASK_DIR	0x080
-#define GPIO_MD_MASK_FN		0x300
-#define GPIO_DFLT_LOW		0x400
-#define GPIO_DFLT_HIGH		0x800
-
-#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
-#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
-#define GPIO7_48MHz_MD		( 7 | GPIO_ALT_FN_1_OUT)
-#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
-#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
-#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
-#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
-#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
-#define GPIO12_CIF_DD_7_MD	(12 | GPIO_ALT_FN_2_IN)
-#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
-#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
-#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
-#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
-#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
-#define GPIO17_CIF_DD_6_MD	(17 | GPIO_ALT_FN_2_IN)
-#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
-#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
-#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
-#define GPIO23_CIF_MCLK_MD	(23 | GPIO_ALT_FN_1_OUT)
-#define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
-#define GPIO24_CIF_FV_MD	(24 | GPIO_ALT_FN_1_OUT)
-#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
-#define GPIO25_CIF_LV_MD	(25 | GPIO_ALT_FN_1_OUT)
-#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
-#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
-#define GPIO26_CIF_PCLK_MD	(26 | GPIO_ALT_FN_2_IN)
-#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
-#define GPIO27_CIF_DD_0_MD	(27 | GPIO_ALT_FN_3_IN)
-#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
-#define GPIO28_BITCLK_IN_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
-#define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
-#define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
-#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
-#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
-#define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
-#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
-#define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
-#define GPIO32_MMCCLK_MD	(32 | GPIO_ALT_FN_2_OUT)
-#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
-#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
-#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
-#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
-#define GPIO35_KP_MKOUT6_MD	(35 | GPIO_ALT_FN_2_OUT)
-#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
-#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
-#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
-#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
-#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
-#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
-#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
-#define GPIO41_KP_MKOUT7_MD	(41 | GPIO_ALT_FN_1_OUT)
-#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
-#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
-#define GPIO42_CIF_MCLK_MD	(42 | GPIO_ALT_FN_3_OUT)
-#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
-#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
-#define GPIO43_CIF_FV_MD	(43 | GPIO_ALT_FN_3_OUT)
-#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
-#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
-#define GPIO44_CIF_LV_MD	(44 | GPIO_ALT_FN_3_OUT)
-#define GPIO45_CIF_PCLK_MD	(45 | GPIO_ALT_FN_3_IN)
-#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
-#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
-#define GPIO45_SYSCLK_AC97_MD	(45 | GPIO_ALT_FN_1_OUT)
-#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
-#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
-#define GPIO47_CIF_DD_0_MD	(47 | GPIO_ALT_FN_1_IN)
-#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
-#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_CIF_DD_5_MD	(48 | GPIO_ALT_FN_1_IN)
-#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
-#define GPIO48_HWTXD_MD		(48 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
-#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
-#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
-#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_HWCTS_MD		(50 | GPIO_ALT_FN_1_IN)
-#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
-#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
-#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
-#define GPIO51_HWRTS_MD		(51 | GPIO_ALT_FN_1_OUT)
-#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
-#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
-#define GPIO52_CIF_DD_4_MD	(52 | GPIO_ALT_FN_1_IN)
-#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
-#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
-#define GPIO53_CIF_MCLK_MD	(53 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
-#define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_CIF_PCLK_MD	(54 | GPIO_ALT_FN_3_IN)
-#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
-#define GPIO55_CIF_DD_1_MD	(55 | GPIO_ALT_FN_1_IN)
-#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
-#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
-#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
-#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
-#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
-#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
-#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
-#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
-#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
-#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
-#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
-#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
-#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
-#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
-#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
-#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
-#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
-#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
-#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
-#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
-#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
-#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
-#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
-#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
-#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
-#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
-#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
-#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
-#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
-#define GPIO78_nPCE_2_MD	(78 | GPIO_ALT_FN_1_OUT)
-#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
-#define GPIO79_pSKTSEL_MD	(79 | GPIO_ALT_FN_1_OUT)
-#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
-#define GPIO81_NSSP_CLK_OUT	(81 | GPIO_ALT_FN_1_OUT)
-#define GPIO81_NSSP_CLK_IN	(81 | GPIO_ALT_FN_1_IN)
-#define GPIO81_CIF_DD_0_MD	(81 | GPIO_ALT_FN_2_IN)
-#define GPIO82_NSSP_FRM_OUT	(82 | GPIO_ALT_FN_1_OUT)
-#define GPIO82_NSSP_FRM_IN	(82 | GPIO_ALT_FN_1_IN)
-#define GPIO82_CIF_DD_5_MD	(82 | GPIO_ALT_FN_3_IN)
-#define GPIO83_NSSP_TX		(83 | GPIO_ALT_FN_1_OUT)
-#define GPIO83_NSSP_RX		(83 | GPIO_ALT_FN_2_IN)
-#define GPIO83_CIF_DD_4_MD	(83 | GPIO_ALT_FN_3_IN)
-#define GPIO84_NSSP_TX		(84 | GPIO_ALT_FN_1_OUT)
-#define GPIO84_NSSP_RX		(84 | GPIO_ALT_FN_2_IN)
-#define GPIO84_CIF_FV_MD	(84 | GPIO_ALT_FN_3_IN)
-#define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
-#define GPIO85_CIF_LV_MD	(85 | GPIO_ALT_FN_3_IN)
-#define GPIO86_nPCE_1_MD	(86 | GPIO_ALT_FN_1_OUT)
-#define GPIO88_USBH1_PWR_MD	(88 | GPIO_ALT_FN_1_IN)
-#define GPIO89_USBH1_PEN_MD	(89 | GPIO_ALT_FN_2_OUT)
-#define GPIO90_CIF_DD_4_MD	(90 | GPIO_ALT_FN_3_IN)
-#define GPIO91_CIF_DD_5_MD	(91 | GPIO_ALT_FN_3_IN)
-#define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
-#define GPIO93_CIF_DD_6_MD	(93 | GPIO_ALT_FN_2_IN)
-#define GPIO94_CIF_DD_5_MD	(94 | GPIO_ALT_FN_2_IN)
-#define GPIO95_CIF_DD_4_MD	(95 | GPIO_ALT_FN_2_IN)
-#define GPIO95_KP_MKIN6_MD	(95 | GPIO_ALT_FN_3_IN)
-#define GPIO96_KP_DKIN3_MD	(96 | GPIO_ALT_FN_1_IN)
-#define GPIO96_FFRXD_MD		(96 | GPIO_ALT_FN_3_IN)
-#define GPIO97_KP_MKIN3_MD	(97 | GPIO_ALT_FN_3_IN)
-#define GPIO98_CIF_DD_0_MD	(98 | GPIO_ALT_FN_2_IN)
-#define GPIO98_FFRTS_MD		(98 | GPIO_ALT_FN_3_OUT)
-#define GPIO99_FFTXD_MD		(99 | GPIO_ALT_FN_3_OUT)
-#define GPIO100_KP_MKIN0_MD	(100 | GPIO_ALT_FN_1_IN)
-#define GPIO101_KP_MKIN1_MD	(101 | GPIO_ALT_FN_1_IN)
-#define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
-#define GPIO102_KP_MKIN2_MD	(102 | GPIO_ALT_FN_1_IN)
-#define GPIO103_CIF_DD_3_MD	(103 | GPIO_ALT_FN_1_IN)
-#define GPIO103_KP_MKOUT0_MD	(103 | GPIO_ALT_FN_2_OUT)
-#define GPIO104_CIF_DD_2_MD	(104 | GPIO_ALT_FN_1_IN)
-#define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
-#define GPIO104_KP_MKOUT1_MD	(104 | GPIO_ALT_FN_2_OUT)
-#define GPIO105_CIF_DD_1_MD	(105 | GPIO_ALT_FN_1_IN)
-#define GPIO105_KP_MKOUT2_MD	(105 | GPIO_ALT_FN_2_OUT)
-#define GPIO106_CIF_DD_9_MD	(106 | GPIO_ALT_FN_1_IN)
-#define GPIO106_KP_MKOUT3_MD	(106 | GPIO_ALT_FN_2_OUT)
-#define GPIO107_CIF_DD_8_MD	(107 | GPIO_ALT_FN_1_IN)
-#define GPIO107_KP_MKOUT4_MD	(107 | GPIO_ALT_FN_2_OUT)
-#define GPIO108_CIF_DD_7_MD	(108 | GPIO_ALT_FN_1_IN)
-#define GPIO108_KP_MKOUT5_MD	(108 | GPIO_ALT_FN_2_OUT)
-#define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
-#define GPIO111_MMCDAT3_MD	(111 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS1_MD	(111 | GPIO_ALT_FN_1_OUT)
-#define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_I2S_SYSCLK_MD	(113 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
-#define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
-
-#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
deleted file mode 100644
index 73e0a329cf7f..000000000000
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/pxa2xx-regs.h
- *
- *  Taken from pxa-regs.h by Russell King
- *
- *  Author:	Nicolas Pitre
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA2XX_REGS_H
-#define __PXA2XX_REGS_H
-
-/*
- * Memory controller
- */
-
-#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
-#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
-#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
-#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
-#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
-#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
-#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
-#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
-
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
-#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
-#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
-#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
-#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
-
-#endif
-
-
-/*
- * Power Manager
- */
-
-#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
-#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
-#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
-#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
-#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
-
-#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
-#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
-#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
-#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
-#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
-#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
-#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
-#define PCMD0	__REG(0x40F00080 + 0 * 4)
-#define PCMD1	__REG(0x40F00080 + 1 * 4)
-#define PCMD2	__REG(0x40F00080 + 2 * 4)
-#define PCMD3	__REG(0x40F00080 + 3 * 4)
-#define PCMD4	__REG(0x40F00080 + 4 * 4)
-#define PCMD5	__REG(0x40F00080 + 5 * 4)
-#define PCMD6	__REG(0x40F00080 + 6 * 4)
-#define PCMD7	__REG(0x40F00080 + 7 * 4)
-#define PCMD8	__REG(0x40F00080 + 8 * 4)
-#define PCMD9	__REG(0x40F00080 + 9 * 4)
-#define PCMD10	__REG(0x40F00080 + 10 * 4)
-#define PCMD11	__REG(0x40F00080 + 11 * 4)
-#define PCMD12	__REG(0x40F00080 + 12 * 4)
-#define PCMD13	__REG(0x40F00080 + 13 * 4)
-#define PCMD14	__REG(0x40F00080 + 14 * 4)
-#define PCMD15	__REG(0x40F00080 + 15 * 4)
-#define PCMD16	__REG(0x40F00080 + 16 * 4)
-#define PCMD17	__REG(0x40F00080 + 17 * 4)
-#define PCMD18	__REG(0x40F00080 + 18 * 4)
-#define PCMD19	__REG(0x40F00080 + 19 * 4)
-#define PCMD20	__REG(0x40F00080 + 20 * 4)
-#define PCMD21	__REG(0x40F00080 + 21 * 4)
-#define PCMD22	__REG(0x40F00080 + 22 * 4)
-#define PCMD23	__REG(0x40F00080 + 23 * 4)
-#define PCMD24	__REG(0x40F00080 + 24 * 4)
-#define PCMD25	__REG(0x40F00080 + 25 * 4)
-#define PCMD26	__REG(0x40F00080 + 26 * 4)
-#define PCMD27	__REG(0x40F00080 + 27 * 4)
-#define PCMD28	__REG(0x40F00080 + 28 * 4)
-#define PCMD29	__REG(0x40F00080 + 29 * 4)
-#define PCMD30	__REG(0x40F00080 + 30 * 4)
-#define PCMD31	__REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC	(1<<12)
-#define PCMD_DCE	(1<<11)
-#define PCMD_LC	(1<<10)
-/* FIXME:  PCMD_SQC need be checked.   */
-#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
-				   bit 9 should be 0 all day. */
-#define PVCR_VCSA	(0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN	(0x1 << 6)
-
-#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
-#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
-#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
-#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
-#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
-#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
-#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
-
-#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO		(1 << 15)	/* RDH Override */
-#define PCFR_PO		(1 << 14)	/* PH Override */
-#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
-#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
-#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
-#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
-#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
-#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
-#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
-#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
-#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
-#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
-#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
-
-#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
-/*
- * PXA2xx specific Core clock definitions
- */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
-
-#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
-#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
-
-#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
deleted file mode 100644
index 3459fb26ce97..000000000000
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef PXA2XX_SPI_H_
-#define PXA2XX_SPI_H_
-
-#define PXA2XX_CS_ASSERT (0x01)
-#define PXA2XX_CS_DEASSERT (0x02)
-
-/* device.platform_data for SSP controller devices */
-struct pxa2xx_spi_master {
-	u32 clock_enable;
-	u16 num_chipselect;
-	u8 enable_dma;
-};
-
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
- */
-struct pxa2xx_spi_chip {
-	u8 tx_threshold;
-	u8 rx_threshold;
-	u8 dma_burst_size;
-	u32 timeout;
-	u8 enable_loopback;
-	void (*cs_control)(u32 command);
-};
-
-#endif /*PXA2XX_SPI_H_*/
diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h
deleted file mode 100644
index fe9364c83a28..000000000000
--- a/include/asm-arm/arch-pxa/pxa3xx-regs.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h
- *
- * PXA3xx specific register definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_PXA3XX_REGS_H
-#define __ASM_ARCH_PXA3XX_REGS_H
-
-/*
- * Oscillator Configuration Register (OSCC)
- */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
-
-#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
-
-
-/*
- * Service Power Management Unit (MPMU)
- */
-#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
-#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
-#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
-#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
-#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
-#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
-#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
-#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
-#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
-
-/*
- * Slave Power Managment Unit
- */
-#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
-#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
-#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
-#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
-#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
-#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
-#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
-#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
-#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
-#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
-#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
-#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
-#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
-#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
-
-/*
- * Application Subsystem Configuration bits.
- */
-#define ASCR_RDH		(1 << 31)
-#define ASCR_D1S		(1 << 2)
-#define ASCR_D2S		(1 << 1)
-#define ASCR_D3S		(1 << 0)
-
-/*
- * Application Reset Status bits.
- */
-#define ARSR_GPR		(1 << 3)
-#define ARSR_LPMR		(1 << 2)
-#define ARSR_WDT		(1 << 1)
-#define ARSR_HWR		(1 << 0)
-
-/*
- * Application Subsystem Wake-Up bits.
- */
-#define ADXER_WRTC		(1 << 31)	/* RTC */
-#define ADXER_WOST		(1 << 30)	/* OS Timer */
-#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
-#define ADXER_WUSBH		(1 << 28)	/* USB host */
-#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
-#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
-#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
-#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
-#define ADXER_WKP		(1 << 21)	/* Keypad */
-#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
-#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
-#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
-#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
-#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
-#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
-#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
-#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
-#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
-#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
-#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
-#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
-#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
-#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
-#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
-#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
-#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
-#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
-#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
-
-/*
- * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
- */
-#define ADXR_L2			(1 << 8)
-#define ADXR_R5			(1 << 5)
-#define ADXR_R4			(1 << 4)
-#define ADXR_R3			(1 << 3)
-#define ADXR_R2			(1 << 2)
-#define ADXR_R1			(1 << 1)
-#define ADXR_R0			(1 << 0)
-
-/*
- * Values for PWRMODE CP15 register
- */
-#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
-#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
-#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
-#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
-#define PXA3xx_PM_S0D0C1	0x01
-
-/*
- * Application Subsystem Clock
- */
-#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
-#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
-#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
-#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
-#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
-#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD	1	/* < LCD Clock Enable */
-#define CKEN_USBH	2	/* < USB host clock enable */
-#define CKEN_CAMERA	3	/* < Camera interface clock enable */
-#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
-#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
-#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT	11	/* < Boot rom clock enable */
-#define CKEN_MMC1	12	/* < MMC1 Clock enable */
-#define CKEN_MMC2	13	/* < MMC2 clock enable */
-#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
-#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
-#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
-#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
-#define CKEN_TPM	19	/* < TPM clock enable */
-#define CKEN_UDC	20	/* < UDC clock enable */
-#define CKEN_BTUART	21	/* < BTUART clock enable */
-#define CKEN_FFUART	22	/* < FFUART clock enable */
-#define CKEN_STUART	23	/* < STUART clock enable */
-#define CKEN_AC97	24	/* < AC97 clock enable */
-#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1	26	/* < SSP1 clock enable */
-#define CKEN_SSP2	27	/* < SSP2 clock enable */
-#define CKEN_SSP3	28	/* < SSP3 clock enable */
-#define CKEN_SSP4	29	/* < SSP4 clock enable */
-#define CKEN_MSL0	30	/* < MSL0 clock enable */
-#define CKEN_PWM0	32	/* < PWM[0] clock enable */
-#define CKEN_PWM1	33	/* < PWM[1] clock enable */
-#define CKEN_I2C	36	/* < I2C clock enable */
-#define CKEN_INTC	38	/* < Interrupt controller clock enable */
-#define CKEN_GPIO	39	/* < GPIO clock enable */
-#define CKEN_1WIRE	40	/* < 1-wire clock enable */
-#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
-#define CKEN_MINI_IM	48	/* < Mini-IM */
-#define CKEN_MINI_LCD	49	/* < Mini LCD */
-
-#if defined(CONFIG_CPU_PXA310)
-#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
-#define CKEN_MVED	43	/* < MVED clock enable */
-#endif
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
-
-#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h
deleted file mode 100644
index 81a8937486cb..000000000000
--- a/include/asm-arm/arch-pxa/pxa3xx_nand.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	struct mtd_partition *parts;
-	unsigned int	nr_parts;
-};
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
deleted file mode 100644
index bbd22396841a..000000000000
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/pxafb.h
- *
- *  Support for the xscale frame buffer.
- *
- *  Author:     Jean-Frederic Clere
- *  Created:    Sep 22, 2003
- *  Copyright:  jfclere@sinix.net
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <asm/arch/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- *   STN  - for passive matrix
- *   DSTN - for dual scan passive matrix
- *   TFT  - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit     18 : for output enable polarity
- * bit     19 : for pixel clock edge
- */
-#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_UNKNOWN	0
-#define LCD_TYPE_MONO_STN	1
-#define LCD_TYPE_MONO_DSTN	2
-#define LCD_TYPE_COLOR_STN	3
-#define LCD_TYPE_COLOR_DSTN	4
-#define LCD_TYPE_COLOR_TFT	5
-#define LCD_TYPE_SMART_PANEL	6
-#define LCD_TYPE_MAX		7
-
-#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 17)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 17)
-#define LCD_PCLK_EDGE_RISE	(0 << 18)
-#define LCD_PCLK_EDGE_FALL	(1 << 18)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_int		cmap_greyscale:1,
-			unused:31;
-
-	/* Parallel Mode Timing */
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
-	 * Note:
-	 * 1. all parameters in nanosecond (ns)
-	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
-	 *    in pxa27x and pxa3xx, initialize them to the same value or
-	 *    the larger one will be used
-	 * 3. same to {rd,wr}_pulse_width
-	 */
-	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
-	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
-	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
-	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
-	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
-	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
-	struct pxafb_mode_info *modes;
-	unsigned int num_modes;
-
-	unsigned int	lcd_conn;
-
-	u_int		fixed_modes:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	/* The following should be defined in LCCR0
-	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
-	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
-	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
-	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
-	 *
-	 * The following should not be defined in LCCR0:
-	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
-	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
-	 */
-	u_int		lccr0;
-	/* The following should be defined in LCCR3
-	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
-	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
-	 *      LCCR3_Acb(X)                    AB Bias pin frequency
-	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
-	 *
-	 * The following should not be defined in LCCR3
-	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
-	 */
-	u_int		lccr3;
-	/* The following should be defined in LCCR4
-	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
-	 *
-	 * All other bits in LCCR4 should be left alone.
-	 */
-	u_int		lccr4;
-	void (*pxafb_backlight_power)(int);
-	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-	void (*smart_update)(struct fb_info *);
-};
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
deleted file mode 100644
index 3ba464c913a5..000000000000
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ /dev/null
@@ -1,174 +0,0 @@
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <asm/arch/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
-#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
-#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
-#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
-#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define LCSR		(0x038)	/* LCD Controller Status Register */
-#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
-#define TMEDCR		(0x044)	/* TMED Control Register */
-
-#define CMDCR		(0x100)	/* Command Control Register */
-#define PRSR		(0x104)	/* Panel Read Status Register */
-
-#define LCCR3_1BPP	(0 << 24)
-#define LCCR3_2BPP	(1 << 24)
-#define LCCR3_4BPP	(2 << 24)
-#define LCCR3_8BPP	(3 << 24)
-#define LCCR3_16BPP	(4 << 24)
-
-#define LCCR3_PDFOR_0	(0 << 30)
-#define LCCR3_PDFOR_1	(1 << 30)
-#define LCCR3_PDFOR_2	(2 << 30)
-#define LCCR3_PDFOR_3	(3 << 30)
-
-#define LCCR4_PAL_FOR_0	(0 << 15)
-#define LCCR4_PAL_FOR_1	(1 << 15)
-#define LCCR4_PAL_FOR_2	(2 << 15)
-#define LCCR4_PAL_FOR_MASK	(3 << 15)
-
-#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
-#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
-#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
-#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
-#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
-#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
-#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20)	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
-#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
-#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
-#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
-#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
-
-#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
-
-#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
-
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
-
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
-#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
-
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
-
-#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
-#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-#define LCSR_RD_ST	(1 << 11)	/* read status */
-#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-/* smartpanel related */
-#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
-#define PRSR_A0		(1 << 8)	/* Read Data Source */
-#define PRSR_ST_OK	(1 << 9)	/* Status OK */
-#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
-
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h
deleted file mode 100644
index 0255328c3c18..000000000000
--- a/include/asm-arm/arch-pxa/regs-ssp.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef __ASM_ARCH_REGS_SSP_H
-#define __ASM_ARCH_REGS_SSP_H
-
-/*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
- */
-
-#define SSCR0		(0x00)  /* SSP Control Register 0 */
-#define SSCR1		(0x04)  /* SSP Control Register 1 */
-#define SSSR		(0x08)  /* SSP Status Register */
-#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
-#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
-
-#define SSTO		(0x28)  /* SSP Time Out Register */
-#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
-#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
-#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
-#define SSTSS		(0x38)  /* SSP Timeslot Status */
-#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
-
-/* Common PXA2xx bits first */
-#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
-#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
-#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
-#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National	(0x2 << 4)	/* National Microwire */
-#define SSCR0_ECS	(1 << 6)	/* External clock select */
-#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
-#if defined(CONFIG_PXA25x)
-#define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-#elif defined(CONFIG_PXA27x)
-#define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
-#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
-#define SSCR0_NCS	(1 << 21)	/* Network clock select */
-#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
-#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
-#endif
-
-#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
-#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
-#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
-#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
-#define SSSR_BSY	(1 << 4)	/* SSP Busy */
-#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
-#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
-#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
-
-#define SSCR0_TIM		(1 << 23)	/* Transmit FIFO Under Run Interrupt Mask */
-#define SSCR0_RIM		(1 << 22)	/* Receive FIFO Over Run interrupt Mask */
-#define SSCR0_NCS		(1 << 21)	/* Network Clock Select */
-#define SSCR0_EDSS		(1 << 20)	/* Extended Data Size Select */
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
-#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
-#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
-#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
-#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
-#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
-#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
-#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
-#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
-#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
-#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
-#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
-#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
-#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
-
-#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
-#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
-#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
-#define SSSR_EOC		(1 << 20)	/* End Of Chain */
-#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
-#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
-
-#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
-#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
-#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
-#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
-#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
-#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
-#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
-
-#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
-#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
-
-#endif /* __ASM_ARCH_REGS_SSP_H */
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
deleted file mode 100644
index 3b1d4a72d4d1..000000000000
--- a/include/asm-arm/arch-pxa/sharpsl.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * SharpSL SSP Driver
- */
-
-unsigned long corgi_ssp_ads7846_putget(unsigned long);
-unsigned long corgi_ssp_ads7846_get(void);
-void corgi_ssp_ads7846_put(unsigned long data);
-void corgi_ssp_ads7846_lock(void);
-void corgi_ssp_ads7846_unlock(void);
-void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-void corgi_ssp_blduty_set(int duty);
-int corgi_ssp_max1111_get(unsigned long data);
-
-/*
- * SharpSL Touchscreen Driver
- */
-
-struct corgits_machinfo {
-	unsigned long (*get_hsync_invperiod)(void);
-	void (*put_hsync)(void);
-	void (*wait_hsync)(void);
-};
-
-
-/*
- * SharpSL Backlight
- */
-extern void corgibl_limit_intensity(int limit);
-
-
-/*
- * SharpSL Battery/PM Driver
- */
-extern void sharpsl_battery_kick(void);
diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h
deleted file mode 100644
index bd14365f7ed5..000000000000
--- a/include/asm-arm/arch-pxa/spitz.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Hardware specific definitions for SL-Cx000 series of PDAs
- *
- * Copyright (c) 2005 Alexander Wykes
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_SPITZ_H
-#define __ASM_ARCH_SPITZ_H  1
-#endif
-
-#include <linux/fb.h>
-
-/* Spitz/Akita GPIOs */
-
-#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
-#define SPITZ_GPIO_RESET           (1)
-#define SPITZ_GPIO_nSD_DETECT      (9)
-#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
-#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
-#define SPITZ_GPIO_ADS7846_CS      (14)
-#define SPITZ_GPIO_SYNC            (16)
-#define SPITZ_GPIO_MAX1111_CS      (20)
-#define SPITZ_GPIO_FATAL_BAT       (21)
-#define SPITZ_GPIO_HSYNC           (22)
-#define SPITZ_GPIO_nSD_CLK         (32)
-#define SPITZ_GPIO_USB_DEVICE      (35)
-#define SPITZ_GPIO_USB_HOST        (37)
-#define SPITZ_GPIO_USB_CONNECT     (41)
-#define SPITZ_GPIO_LCDCON_CS       (53)
-#define SPITZ_GPIO_nPCE            (54)
-#define SPITZ_GPIO_nSD_WP          (81)
-#define SPITZ_GPIO_ON_RESET        (89)
-#define SPITZ_GPIO_BAT_COVER       (90)
-#define SPITZ_GPIO_CF_CD           (94)
-#define SPITZ_GPIO_ON_KEY          (95)
-#define SPITZ_GPIO_SWA             (97)
-#define SPITZ_GPIO_SWB             (96)
-#define SPITZ_GPIO_CHRG_FULL       (101)
-#define SPITZ_GPIO_CO              (101)
-#define SPITZ_GPIO_CF_IRQ          (105)
-#define SPITZ_GPIO_AC_IN           (115)
-#define SPITZ_GPIO_HP_IN           (116)
-
-/* Spitz Only GPIOs */
-
-#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
-#define SPITZ_GPIO_CF2_CD          (93)
-
-
-/* Spitz/Akita Keyboard Definitions */
-
-#define SPITZ_KEY_STROBE_NUM         (11)
-#define SPITZ_KEY_SENSE_NUM          (7)
-#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
-#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
-#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
-#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
-#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
-#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
-#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
-#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
-
-#define SPITZ_GPIO_KEY_STROBE0       88
-#define SPITZ_GPIO_KEY_STROBE1       23
-#define SPITZ_GPIO_KEY_STROBE2       24
-#define SPITZ_GPIO_KEY_STROBE3       25
-#define SPITZ_GPIO_KEY_STROBE4       26
-#define SPITZ_GPIO_KEY_STROBE5       27
-#define SPITZ_GPIO_KEY_STROBE6       52
-#define SPITZ_GPIO_KEY_STROBE7       103
-#define SPITZ_GPIO_KEY_STROBE8       107
-#define SPITZ_GPIO_KEY_STROBE9       108
-#define SPITZ_GPIO_KEY_STROBE10      114
-
-#define SPITZ_GPIO_KEY_SENSE0        12
-#define SPITZ_GPIO_KEY_SENSE1        17
-#define SPITZ_GPIO_KEY_SENSE2        91
-#define SPITZ_GPIO_KEY_SENSE3        34
-#define SPITZ_GPIO_KEY_SENSE4        36
-#define SPITZ_GPIO_KEY_SENSE5        38
-#define SPITZ_GPIO_KEY_SENSE6        39
-
-
-/* Spitz Scoop Device (No. 1) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
-#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
-#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
-#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
-#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
-
-#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
-                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
-                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
-#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_SUS_SET     0
-
-/* Spitz Scoop Device (No. 2) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
-#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
-#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
-
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
-                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-
-#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
-#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
-
-
-/* Spitz IRQ Definitions */
-
-#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
-
-/*
- * Shared data structures
- */
-extern struct platform_device spitzscoop_device;
-extern struct platform_device spitzscoop2_device;
-extern struct platform_device spitzssp_device;
-extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h
deleted file mode 100644
index a012882c9ee6..000000000000
--- a/include/asm-arm/arch-pxa/ssp.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  ssp.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver supports the following PXA CPU/SSP ports:-
- *
- *       PXA250     SSP
- *       PXA255     SSP, NSSP
- *       PXA26x     SSP, NSSP, ASSP
- *       PXA27x     SSP1, SSP2, SSP3
- *       PXA3xx     SSP1, SSP2, SSP3, SSP4
- */
-
-#ifndef __ASM_ARCH_SSP_H
-#define __ASM_ARCH_SSP_H
-
-#include <linux/list.h>
-
-enum pxa_ssp_type {
-	SSP_UNDEFINED = 0,
-	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
-	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
-	PXA27x_SSP,
-};
-
-struct ssp_device {
-	struct platform_device *pdev;
-	struct list_head	node;
-
-	struct clk	*clk;
-	void __iomem	*mmio_base;
-	unsigned long	phys_base;
-
-	const char	*label;
-	int		port_id;
-	int		type;
-	int		use_count;
-	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
-};
-
-/*
- * SSP initialisation flags
- */
-#define SSP_NO_IRQ	0x1		/* don't register an irq handler in SSP driver */
-
-struct ssp_state {
-	u32	cr0;
-	u32 cr1;
-	u32 to;
-	u32 psp;
-};
-
-struct ssp_dev {
-	struct ssp_device *ssp;
-	u32 port;
-	u32 mode;
-	u32 flags;
-	u32 psp_flags;
-	u32 speed;
-	int irq;
-};
-
-int ssp_write_word(struct ssp_dev *dev, u32 data);
-int ssp_read_word(struct ssp_dev *dev, u32 *data);
-int ssp_flush(struct ssp_dev *dev);
-void ssp_enable(struct ssp_dev *dev);
-void ssp_disable(struct ssp_dev *dev);
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
-int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
-int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
-void ssp_exit(struct ssp_dev *dev);
-
-struct ssp_device *ssp_request(int port, const char *label);
-void ssp_free(struct ssp_device *);
-#endif /* __ASM_ARCH_SSP_H */
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
deleted file mode 100644
index ba7e132de1b3..000000000000
--- a/include/asm-arm/arch-pxa/system.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/system.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-#include "pxa-regs.h"
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-
-static inline void arch_reset(char mode)
-{
-	if (cpu_is_pxa2xx())
-		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Initialize the watchdog and let it fire */
-		OWER = OWER_WME;
-		OSSR = OSSR_M3;
-		OSMR3 = OSCR + 368640;	/* ... in 100 ms */
-	}
-}
-
diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h
deleted file mode 100644
index 8d882f0b6a16..000000000000
--- a/include/asm-arm/arch-pxa/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/timex.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
deleted file mode 100644
index c5b6fde6907c..000000000000
--- a/include/asm-arm/arch-pxa/tosa.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Hardware specific definitions for Sharp SL-C6000x series of PDAs
- *
- * Copyright (c) 2005 Dirk Opfer
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef _ASM_ARCH_TOSA_H_
-#define _ASM_ARCH_TOSA_H_ 1
-
-/*  TOSA Chip selects  */
-#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
-/* Internel Scoop */
-#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
-/* Jacket Scoop */
-#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
-
-/*
- * SCOOP2 internal GPIOs
- */
-#define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
-#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_SCOOP_TC6393_REST_IN	SCOOP_GPCR_PA12
-#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
-#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_SCOOP_BT_RESET		SCOOP_GPCR_PA17
-#define TOSA_SCOOP_BT_PWR_EN		SCOOP_GPCR_PA18
-#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
-		TOSA_SCOOP_AUD_PWR_ON |\
-		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
-/* GPIO out put level when init   1: Hi */
-#define TOSA_SCOOP_IO_OUT     ( TOSA_SCOOP_TC6393_REST_IN )
-
-/*
- * SCOOP2 jacket GPIOs
- */
-#define TOSA_SCOOP_JC_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
-#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_SCOOP_JC_TC6393_SUSPEND	SCOOP_GPCR_PA15
-#define TOSA_SCOOP_JC_TC3693_L3V_ON	SCOOP_GPCR_PA16
-#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
-#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
-#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR ( \
-		TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
-		TOSA_SCOOP_JC_CARD_LIMIT_SEL )
-
-/*
- * Timing Generator
- */
-#define TG_PNLCTL 			0x00
-#define TG_TPOSCTL 			0x01
-#define TG_DUTYCTL 			0x02
-#define TG_GPOSR 			0x03
-#define TG_GPODR1 			0x04
-#define TG_GPODR2 			0x05
-#define TG_PINICTL 			0x06
-#define TG_HPOSCTL 			0x07
-
-/*
- * PXA GPIOs
- */
-#define TOSA_GPIO_POWERON		(0)
-#define TOSA_GPIO_RESET			(1)
-#define TOSA_GPIO_AC_IN			(2)
-#define TOSA_GPIO_RECORD_BTN		(3)
-#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
-#define TOSA_GPIO_USB_IN		(5)
-#define TOSA_GPIO_JACKET_DETECT		(7)
-#define TOSA_GPIO_nSD_DETECT		(9)
-#define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393_CLK		(11)
-#define TOSA_GPIO_BAT1_CRG		(12)
-#define TOSA_GPIO_CF_CD			(13)
-#define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393_INT		(15)
-#define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393_RDY		(18)
-#define TOSA_GPIO_ON_RESET		(19)
-#define TOSA_GPIO_EAR_IN		(20)
-#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
-#define TOSA_GPIO_ON_KEY		(22)
-#define TOSA_GPIO_VGA_LINE		(27)
-#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
-#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
-#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
-#define TOSA_GPIO_TG_SPI_SCLK		(81)
-#define TOSA_GPIO_TG_SPI_CS		(82)
-#define TOSA_GPIO_TG_SPI_MOSI		(83)
-#define TOSA_GPIO_BAT1_LOW		(84)
-
-#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
-
-#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
-
-#define TOSA_KEY_STROBE_NUM		(11)
-#define TOSA_KEY_SENSE_NUM		(7)
-
-#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
-#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
-#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
-#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
-#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
-#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
-#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
-#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
-#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
-#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
-#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
-
-/*
- * Interrupts
- */
-#define TOSA_IRQ_GPIO_WAKEUP        	IRQ_GPIO(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN         	IRQ_GPIO(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN    	IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC          	IRQ_GPIO(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN        	IRQ_GPIO(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT 	IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT       	IRQ_GPIO(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT    	IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393_INT    	IRQ_GPIO(TOSA_GPIO_TC6393_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY        	IRQ_GPIO(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE      	IRQ_GPIO(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT        	IRQ_GPIO(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ     	IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED    	IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW      	IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	IRQ_GPIO(69+(a))
-
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
-
-#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
-
-#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
-#define TOSA_KEY_RECORD		KEY_YEN
-#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
-#define TOSA_KEY_CANCEL		KEY_ESC
-#define TOSA_KEY_CENTER		KEY_HIRAGANA
-#define TOSA_KEY_OK		KEY_HENKAN
-#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
-#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
-#define TOSA_KEY_LIGHT		KEY_MUHENKAN
-#define TOSA_KEY_MENU		KEY_HANJA
-#define TOSA_KEY_FN		KEY_RIGHTALT
-#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
-#else
-#define TOSA_KEY_RECORD		KEY_RECORD
-#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
-#define TOSA_KEY_CANCEL		KEY_CANCEL
-#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
-#define TOSA_KEY_OK		KEY_OK
-#define TOSA_KEY_CALENDAR	KEY_CALENDAR
-#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
-#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
-#define TOSA_KEY_MENU		KEY_MENU
-#define TOSA_KEY_FN		KEY_FN
-#define TOSA_KEY_MAIL		KEY_MAIL
-#endif
-
-#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/include/asm-arm/arch-pxa/trizeps4.h
deleted file mode 100644
index 641d0ec110bb..000000000000
--- a/include/asm-arm/arch-pxa/trizeps4.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/************************************************************************
- * Include file for TRIZEPS4 SoM and ConXS eval-board
- * Copyright (c) Jürgen Schindele
- * 2006
- ************************************************************************/
-
-/*
- * Includes/Defines
- */
-#ifndef _TRIPEPS4_H_
-#define _TRIPEPS4_H_
-
-/* physical memory regions */
-#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
-#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
-#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
-#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)			/* Logic chip on ConXS-Board CSFR register */
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)	/* Logic chip on ConXS-Board BOCR register */
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)	/* Logic chip on ConXS-Board IRCR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)	/* Logic chip on ConXS-Board UPSR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)	/* Logic chip on ConXS-Board DICR register*/
-
-/* virtual memory regions */
-#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
-#define TRIZEPS4_CFSR_VIRT	0xF0100000
-#define TRIZEPS4_BOCR_VIRT	0xF0200000
-#define TRIZEPS4_DICR_VIRT	0xF0300000
-#define TRIZEPS4_IRCR_VIRT	0xF0400000
-#define TRIZEPS4_UPSR_VIRT	0xF0500000
-
-/* size of flash */
-#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		101
-#define TRIZEPS4_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
-
-/* UCB1400 audio / TS-controller */
-#define GPIO_UCB1400		1
-#define TRIZEPS4_UCB1400_IRQ	IRQ_GPIO(GPIO_UCB1400)
-
-/* PCMCIA socket Compact Flash */
-#define GPIO_PCD		11		/* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ		IRQ_GPIO(GPIO_PCD)
-#define GPIO_PRDY		13		/* READY / nINT */
-#define TRIZEPS4_READY_NINT	IRQ_GPIO(GPIO_PRDY)
-
-/* MMC socket */
-#define GPIO_MMC_DET		12
-#define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
-
-/* LEDS using tx2 / rx2 */
-#define GPIO_SYS_BUSY_LED	46
-#define GPIO_HEARTBEAT_LED	47
-
-/* Off-module PIC on ConXS board */
-#define GPIO_PIC		0
-#define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
-
-#define CFSR_P2V(x)		((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)		((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-
-#define BCR_P2V(x)		((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)		((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-
-#define DCR_P2V(x)		((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)		((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
-
-#ifndef __ASSEMBLY__
-#define ConXS_CFSR		(*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
-#define ConXS_BCR		(*((volatile unsigned short *)BCR_P2V(0x0E000000)))
-#define ConXS_DCR		(*((volatile unsigned short *)DCR_P2V(0x0F800000)))
-#else
-#define ConXS_CFSR		CFSR_P2V(0x0C000000)
-#define ConXS_BCR		BCR_P2V(0x0E000000)
-#define ConXS_DCR		DCR_P2V(0x0F800000)
-#endif
-
-#define ConXS_CFSR_BVD_MASK	0x0003
-#define ConXS_CFSR_BVD1		(1 << 0)
-#define ConXS_CFSR_BVD2		(1 << 1)
-#define ConXS_CFSR_VS_MASK	0x000C
-#define ConXS_CFSR_VS1		(1 << 2)
-#define ConXS_CFSR_VS2		(1 << 3)
-#define ConXS_CFSR_VS_5V	(0x3 << 2)
-#define ConXS_CFSR_VS_3V3	0x0
-
-#define ConXS_BCR_S0_POW_EN0	(1 << 0)
-#define ConXS_BCR_S0_POW_EN1	(1 << 1)
-#define ConXS_BCR_L_DISP	(1 << 4)
-#define ConXS_BCR_CF_BUF_EN	(1 << 5)
-#define ConXS_BCR_CF_RESET	(1 << 7)
-#define ConXS_BCR_S0_VCC_3V3	0x1
-#define ConXS_BCR_S0_VCC_5V0	0x2
-#define ConXS_BCR_S0_VPP_12V	0x4
-#define ConXS_BCR_S0_VPP_3V3	0x8
-
-#define ConXS_IRCR_MODE		(1 << 0)
-#define ConXS_IRCR_SD		(1 << 1)
-
-#endif /* _TRIPEPS4_H_ */
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
deleted file mode 100644
index 27aa3a91012f..000000000000
--- a/include/asm-arm/arch-pxa/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
deleted file mode 100644
index dadf4c20b622..000000000000
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/uncompress.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/arch/pxa-regs.h>
-
-#define __REG(x)	((volatile unsigned long *)x)
-
-#define UART		FFUART
-
-
-static inline void putc(char c)
-{
-	if (!(UART[UART_IER] & IER_UUE))
-		return;
-	while (!(UART[UART_LSR] & LSR_TDRQ))
-		barrier();
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/include/asm-arm/arch-pxa/vmalloc.h
deleted file mode 100644
index 5bb450c7aa2c..000000000000
--- a/include/asm-arm/arch-pxa/vmalloc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/vmalloc.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
deleted file mode 100644
index de577de8d18c..000000000000
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
-
-#define ZYLONITE_ETH_PHYS	0x14000000
-
-#define EXT_GPIO(x)		(128 + (x))
-
-/* the following variables are processor specific and initialized
- * by the corresponding zylonite_pxa3xx_init()
- */
-struct platform_mmc_slot {
-	int gpio_cd;
-	int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
-extern int gpio_eth_irq;
-
-extern int wm9713_irq;
-
-extern int lcd_id;
-extern int lcd_orientation;
-
-#ifdef CONFIG_CPU_PXA300
-extern void zylonite_pxa300_init(void);
-#else
-static inline void zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
-}
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-extern void zylonite_pxa320_init(void);
-#else
-static inline void zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320())
-		panic("%s: PXA320 not supported\n", __FUNCTION__);
-}
-#endif
-
-#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h
deleted file mode 100644
index 206f7a752882..000000000000
--- a/include/asm-arm/arch-realview/board-eb.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-eb.h
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include <asm/arch/platform.h>
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE		0x40000000
-#define REALVIEW_EB_FLASH_SIZE		SZ_64M
-#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x10100700
-#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x1F000700
-#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
-#endif
-
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2	-1
-#define IRQ_EB11MP_UART3	-1
-#define IRQ_EB11MP_CLCD		-1
-#define IRQ_EB11MP_DMA		-1
-#define IRQ_EB11MP_WDOG		-1
-#define IRQ_EB11MP_GPIO0	-1
-#define IRQ_EB11MP_GPIO1	-1
-#define IRQ_EB11MP_GPIO2	-1
-#define IRQ_EB11MP_SCI		-1
-#define IRQ_EB11MP_SSP		-1
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK		0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
-#define REALVIEW_EB_PROC_ARM9		0x02000000
-#define REALVIEW_EB_PROC_ARM11		0x04000000
-#define REALVIEW_EB_PROC_ARM11MP	0x06000000
-
-#define check_eb_proc(proc_type)						\
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
-	 == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp()	0
-#endif
-
-#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h
deleted file mode 100644
index 48ce9c833705..000000000000
--- a/include/asm-arm/arch-realview/board-pb1176.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-pb1176.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include <asm/arch/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE		0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
-
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
-#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h
deleted file mode 100644
index a1294d915fa8..000000000000
--- a/include/asm-arm/arch-realview/board-pb11mp.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-pb11mp.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include <asm/arch/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000700
-#define REALVIEW_TC11MP_TWD_SIZE		0x00000100
-#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
-
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
-#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
deleted file mode 100644
index c8c860c3c26e..000000000000
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-realview/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf0000000	@ virtual base
-		orr	\rx, \rx, #0x00009000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h
deleted file mode 100644
index 8342e3f9d6ec..000000000000
--- a/include/asm-arm/arch-realview/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
deleted file mode 100644
index cd26306d8e57..000000000000
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-realview/entry-macro.S
- *
- * Low-level IRQ helper macros for RealView platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/gic.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved.. */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
deleted file mode 100644
index 1ee8313ceb6a..000000000000
--- a/include/asm-arm/arch-realview/hardware.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/hardware.h
- *
- *  This file contains the hardware definitions of the RealView boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
-#define __io_address(n)		__io(IO_ADDRESS(n))
-
-#endif
diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h
deleted file mode 100644
index c70f1dfbe135..000000000000
--- a/include/asm-arm/arch-realview/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/io.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
deleted file mode 100644
index ccbac59235c6..000000000000
--- a/include/asm-arm/arch-realview/irqs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define IRQ_GIC_START		32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h
deleted file mode 100644
index ed370abb638f..000000000000
--- a/include/asm-arm/arch-realview/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET		UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
deleted file mode 100644
index 424c0aaf46a0..000000000000
--- a/include/asm-arm/arch-realview/platform.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI          0x30000000
-#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
-#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
-
-#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE           SZ_2M
-
-/* 
- *  SDRAM
- */
-#define REALVIEW_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  RealView Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define REALVIEW_SYS_ID_OFFSET               0x00
-#define REALVIEW_SYS_SW_OFFSET               0x04
-#define REALVIEW_SYS_LED_OFFSET              0x08
-#define REALVIEW_SYS_OSC0_OFFSET             0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET             0x10
-#define REALVIEW_SYS_OSC2_OFFSET             0x14
-#define REALVIEW_SYS_OSC3_OFFSET             0x18
-#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET             0x20
-#define REALVIEW_SYS_100HZ_OFFSET            0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET            0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
-#define REALVIEW_SYS_PCICTL_OFFSET           0x44
-#define REALVIEW_SYS_MCI_OFFSET              0x48
-#define REALVIEW_SYS_FLASH_OFFSET            0x4C
-#define REALVIEW_SYS_CLCD_OFFSET             0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
-#define REALVIEW_SYS_24MHz_OFFSET            0x5C
-#define REALVIEW_SYS_MISC_OFFSET             0x60
-#define REALVIEW_SYS_IOSEL_OFFSET            0x70
-#define REALVIEW_SYS_PROCID_OFFSET           0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
-
-#define REALVIEW_SYS_BASE                    0x10000000
-#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
-#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
-#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
-#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
-#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE             0x2C000000
-#define REALVIEW_DOC_SIZE             (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE        512
-#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0             (1 << 0)
-#define REALVIEW_SYS_LED1             (1 << 1)
-#define REALVIEW_SYS_LED2             (1 << 2)
-#define REALVIEW_SYS_LED3             (1 << 3)
-#define REALVIEW_SYS_LED4             (1 << 4)
-#define REALVIEW_SYS_LED5             (1 << 5)
-#define REALVIEW_SYS_LED6             (1 << 6)
-#define REALVIEW_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  REALVIEW_SYS_LED
-
-/* 
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
-#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-/* 
- *  Application Flash
- * 
- */
-#define FLASH_BASE                      REALVIEW_FLASH_BASE
-#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/* 
- *  Boot Flash
- * 
- */
-#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
-#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK	0
-#define REALVIEW_TIMCLK	1
-
-#define REALVIEW_TIMER1_EnSel	15
-#define REALVIEW_TIMER2_EnSel	17
-#define REALVIEW_TIMER3_EnSel	19
-#define REALVIEW_TIMER4_EnSel	21
-
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define REALVIEW_CSR_BASE             0x10000000
-#define REALVIEW_CSR_SIZE             0x10000000
-
-#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h
deleted file mode 100644
index d55802d645af..000000000000
--- a/include/asm-arm/arch-realview/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL		0x00
-#define SCU_CONFIG		0x04
-#define SCU_CPU_STATUS		0x08
-#define SCU_INVALIDATE		0x0c
-#define SCU_FPGA_REVISION	0x10
-
-#endif
diff --git a/include/asm-arm/arch-realview/smp.h b/include/asm-arm/arch-realview/smp.h
deleted file mode 100644
index 515819efd046..000000000000
--- a/include/asm-arm/arch-realview/smp.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef ASMARM_ARCH_SMP_H
-#define ASMARM_ARCH_SMP_H
-
-
-#include <asm/hardware/gic.h>
-
-#define hard_smp_processor_id()			\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(cpumask_t callmap)
-{
-	gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h
deleted file mode 100644
index 6f3d0ce0ca1e..000000000000
--- a/include/asm-arm/arch-realview/system.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
-}
-
-#endif
diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h
deleted file mode 100644
index 5b9d82d0a5e0..000000000000
--- a/include/asm-arm/arch-realview/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/timex.h
- *
- *  RealView architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h
deleted file mode 100644
index 4c905d7a13a1..000000000000
--- a/include/asm-arm/arch-realview/uncompress.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/board-pb1176.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_realview_eb())
-		return REALVIEW_EB_UART0_BASE;
-	else if (machine_is_realview_pb11mp())
-		return REALVIEW_PB11MP_UART0_BASE;
-	else if (machine_is_realview_pb1176())
-		return REALVIEW_PB1176_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h
deleted file mode 100644
index 0ad49af186af..000000000000
--- a/include/asm-arm/arch-realview/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-realview/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/arch-rpc/acornfb.h b/include/asm-arm/arch-rpc/acornfb.h
deleted file mode 100644
index ecb7733a0949..000000000000
--- a/include/asm-arm/arch-rpc/acornfb.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/acornfb.h
- *
- *  Copyright (C) 1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  AcornFB architecture specific code
- */
-
-#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
-
-static inline int
-acornfb_valid_pixrate(struct fb_var_screeninfo *var)
-{
-	u_long limit;
-
-	if (!var->pixclock)
-		return 0;
-
-	/*
-	 * Limits below are taken from RISC OS bandwidthlimit file
-	 */
-	if (current_par.using_vram) {
-		if (current_par.vram_half_sam == 2048)
-			limit = 6578;
-		else
-			limit = 13157;
-	} else {
-		limit = 26315;
-	}
-
-	return acornfb_bandwidth(var) >= limit;
-}
-
-/*
- * Try to find the best PLL parameters for the pixel clock.
- * This algorithm seems to give best predictable results,
- * and produces the same values as detailed in the VIDC20
- * data sheet.
- */
-static inline u_int
-acornfb_vidc20_find_pll(u_int pixclk)
-{
-	u_int r, best_r = 2, best_v = 2;
-	int best_d = 0x7fffffff;
-
-	for (r = 2; r <= 32; r++) {
-		u_int rr, v, p;
-		int d;
-
-		rr = 41667 * r;
-
-		v = (rr + pixclk / 2) / pixclk;
-
-		if (v > 32 || v < 2)
-			continue;
-
-		p = (rr + v / 2) / v;
-
-		d = pixclk - p;
-
-		if (d < 0)
-			d = -d;
-
-		if (d < best_d) {
-			best_d = d;
-			best_v = v - 1;
-			best_r = r - 1;
-		}
-
-		if (d == 0)
-			break;
-	}
-
-	return best_v << 8 | best_r;
-}
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
-			  struct fb_var_screeninfo *var)
-{
-	u_int div;
-
-	/* Select pixel-clock divisor to keep PLL in range */
-	div = var->pixclock / 9090; /*9921*/
-
-	/* Limit divisor */
-	if (div == 0)
-		div = 1;
-	if (div > 8)
-		div = 8;
-
-	/* Encode divisor to VIDC20 setting */
-	switch (div) {
-	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
-	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
-	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
-	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
-	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
-	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
-	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
-	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
-	}
-
-	/*
-	 * With VRAM, the FIFO can be set to the highest possible setting
-	 * because there are no latency considerations for other memory
-	 * accesses. However, in 64 bit bus mode the FIFO preload value
-	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
-	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
-	 * FIFO preload value).
-	 */
-	if (current_par.using_vram) {
-		if (current_par.vram_half_sam == 2048)
-			vidc->control |= VIDC20_CTRL_FIFO_24;
-		else
-			vidc->control |= VIDC20_CTRL_FIFO_28;
-	} else {
-		unsigned long bandwidth = acornfb_bandwidth(var);
-
-		/* Encode bandwidth as VIDC20 setting */
-		if (bandwidth > 33334)		/* < 30.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_16;
-		else if (bandwidth > 26666)	/* < 37.5MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_20;
-		else if (bandwidth > 22222)	/* < 45.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_24;
-		else				/* > 45.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_28;
-	}
-
-	/* Find the PLL values */
-	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
-}
-
-#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
-#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S
deleted file mode 100644
index c634c8d8f4a1..000000000000
--- a/include/asm-arm/arch-rpc/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-rpc/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x03000000
-		movne	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000fe0
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-rpc/dma.h b/include/asm-arm/arch-rpc/dma.h
deleted file mode 100644
index d24a27e30b93..000000000000
--- a/include/asm-arm/arch-rpc/dma.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/dma.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define MAX_DMA_ADDRESS		0xd0000000
-#define MAX_DMA_CHANNELS	8
-
-#define DMA_0			0
-#define DMA_1			1
-#define DMA_2			2
-#define DMA_3			3
-#define DMA_S0			4
-#define DMA_S1			5
-#define DMA_VIRTUAL_FLOPPY	6
-#define DMA_VIRTUAL_SOUND	7
-
-#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
deleted file mode 100644
index 038b761fdadc..000000000000
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <asm/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
diff --git a/include/asm-arm/arch-rpc/hardware.h b/include/asm-arm/arch-rpc/hardware.h
deleted file mode 100644
index 7480f4e8d974..000000000000
--- a/include/asm-arm/arch-rpc/hardware.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/hardware.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the RiscPC series machines.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/arch/memory.h>
-
-#ifndef __ASSEMBLY__
-#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
-#else
-#define IOMEM(x) x
-#endif /* __ASSEMBLY__ */
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_SIZE		0x10000000
-#define RAM_START		0x10000000
-
-#define EASI_SIZE		0x08000000	/* EASI I/O */
-#define EASI_START		0x08000000
-#define EASI_BASE		0xe5000000
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define UNCACHEABLE_ADDR	0xdf010000
-
-/*
- * IO Addresses
- */
-#define VIDC_BASE		IOMEM(0xe0400000)
-#define EXPMASK_BASE		0xe0360000
-#define IOMD_BASE		IOMEM(0xe0200000)
-#define IOC_BASE		IOMEM(0xe0200000)
-#define PCIO_BASE		IOMEM(0xe0010000)
-#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-#define IO_EC_EASI_BASE		0x81400000
-#define IO_EC_IOC4_BASE		0x8009c000
-#define IO_EC_IOC_BASE		0x80090000
-#define IO_EC_MEMC8_BASE	0x8000ac00
-#define IO_EC_MEMC_BASE		0x80000000
-
-#define NETSLOT_BASE		0x0302b000
-#define NETSLOT_SIZE		0x00001000
-
-#define PODSLOT_IOC0_BASE	0x03240000
-#define PODSLOT_IOC4_BASE	0x03270000
-#define PODSLOT_IOC_SIZE	(1 << 14)
-#define PODSLOT_MEMC_BASE	0x03000000
-#define PODSLOT_MEMC_SIZE	(1 << 14)
-#define PODSLOT_EASI_BASE	0x08000000
-#define PODSLOT_EASI_SIZE	(1 << 24)
-
-#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
deleted file mode 100644
index 6bd2295c0e01..000000000000
--- a/include/asm-arm/arch-rpc/io.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/io.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * GCC is totally crap at loading/storing data.  We try to persuade it
- * to do the right thing by using these whereever possible instead of
- * the above.
- */
-#define __arch_base_getb(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldrb	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_getl(b,o)			\
- ({						\
-	unsigned int __v, __r = (b);		\
-	__asm__ __volatile__(			\
-		"ldr	%0, [%1, %2]"		\
-		: "=r" (__v)			\
-		: "r" (__r), "Ir" (o));		\
-	__v;					\
- })
-
-#define __arch_base_putb(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"strb	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-#define __arch_base_putl(v,b,o)			\
- ({						\
-	unsigned int __r = (b);			\
-	__asm__ __volatile__(			\
-		"str	%0, [%1, %2]"		\
-		:				\
-		: "r" (v), "r" (__r), "Ir" (o));\
- })
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.  Note that all addresses are
- * shifted left!
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-/*
- * Dynamic IO functions.
- */
-static inline void __outb (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"strb	%1, [%0, %2, lsl #2]	@ outb"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outw (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outw"
-	: "=&r" (temp)
-	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-static inline void __outl (unsigned int value, unsigned int port)
-{
-	unsigned long temp;
-	__asm__ __volatile__(
-	"tst	%2, #0x80000000\n\t"
-	"mov	%0, %4\n\t"
-	"addeq	%0, %0, %3\n\t"
-	"str	%1, [%0, %2, lsl #2]	@ outl"
-	: "=&r" (temp)
-	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
-	: "cc");
-}
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{										\
-	unsigned long temp, value;						\
-	__asm__ __volatile__(							\
-	"tst	%2, #0x80000000\n\t"						\
-	"mov	%0, %4\n\t"							\
-	"addeq	%0, %0, %3\n\t"							\
-	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
-	: "=&r" (temp), "=r" (value)						\
-	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
-	: "cc");								\
-	return (unsigned sz)value;						\
-}
-
-static inline void __iomem *__deprecated __ioaddr(unsigned int port)
-{
-	void __iomem *ret;
-	if (__PORT_PCIO(port))
-		ret = PCIO_BASE;
-	else
-		ret = IO_BASE;
-	return ret + (port << 2);
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)							\
-({										\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"strb	%0, [%1, %2]	@ outbc"				\
-		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inbc(port)								\
-({										\
-	unsigned char result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldrb	%0, [%1, %2]	@ inbc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __outwc(value,port)							\
-({										\
-	unsigned long __v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outwc"				\
-		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inwc(port)								\
-({										\
-	unsigned short result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inwc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result & 0xffff;							\
-})
-
-#define __outlc(value,port)							\
-({										\
-	unsigned long __v = value;						\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"str	%0, [%1, %2]	@ outlc"				\
-		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
-})
-
-#define __inlc(port)								\
-({										\
-	unsigned long result;							\
-	if (__PORT_PCIO((port)))						\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
-	else									\
-		__asm__ __volatile__(						\
-		"ldr	%0, [%1, %2]	@ inlc"					\
-		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
-	result;									\
-})
-
-#define __ioaddrc(port)		__ioaddr(port)
-
-#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
-#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
-#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)	((unsigned long)__ioaddr((port)))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-rpc/irqs.h b/include/asm-arm/arch-rpc/irqs.h
deleted file mode 100644
index 27c35b05b27d..000000000000
--- a/include/asm-arm/arch-rpc/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define IRQ_PRINTER		0
-#define IRQ_BATLOW		1
-#define IRQ_FLOPPYINDEX		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_IMMEDIATE		7
-#define IRQ_EXPCARDFIQ		8
-#define IRQ_HARDDISK		9
-#define IRQ_SERIALPORT		10
-#define IRQ_FLOPPYDISK		12
-#define IRQ_EXPANSIONCARD	13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define FIQ_FLOPPYDATA		0
-#define FIQ_ECONET		2
-#define FIQ_SERIALPORT		4
-#define FIQ_EXPANSIONCARD	6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define IRQ_TIMER		IRQ_TIMER0
-
diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h
deleted file mode 100644
index 303c424ce673..000000000000
--- a/include/asm-arm/arch-rpc/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
- *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x10000000)
-
-/*
- * These are exactly the same on the RiscPC as the
- * physical memory view.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h
deleted file mode 100644
index 729c2ae4b513..000000000000
--- a/include/asm-arm/arch-rpc/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/io.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	iomd_writeb(0, IOMD_ROMCR0);
-
-	/*
-	 * Jump into the ROM
-	 */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-rpc/timex.h b/include/asm-arm/arch-rpc/timex.h
deleted file mode 100644
index ed7df64d960b..000000000000
--- a/include/asm-arm/arch-rpc/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h
deleted file mode 100644
index b8e29efd8c5b..000000000000
--- a/include/asm-arm/arch-rpc/uncompress.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/uncompress.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VIDMEM ((char *)SCREEN_START)
- 
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-int video_size_row;
-unsigned char bytes_per_char_h;
-extern unsigned long con_charconvtable[256];
-
-struct param_struct {
-	unsigned long page_size;
-	unsigned long nr_pages;
-	unsigned long ramdisk_size;
-	unsigned long mountrootrdonly;
-	unsigned long rootdev;
-	unsigned long video_num_cols;
-	unsigned long video_num_rows;
-	unsigned long video_x;
-	unsigned long video_y;
-	unsigned long memc_control_reg;
-	unsigned char sounddefault;
-	unsigned char adfsdrives;
-	unsigned char bytes_per_char_h;
-	unsigned char bytes_per_char_v;
-	unsigned long unused[256/4-11];
-};
-
-static const unsigned long palette_4[16] = {
-	0x00000000,
-	0x000000cc,
-	0x0000cc00,             /* Green   */
-	0x0000cccc,             /* Yellow  */
-	0x00cc0000,             /* Blue    */
-	0x00cc00cc,             /* Magenta */
-	0x00cccc00,             /* Cyan    */
-	0x00cccccc,             /* White   */
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff
-};
-
-#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
-#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
-
-/*
- * params_phys is a linker defined symbol - see
- * arch/arm/boot/compressed/Makefile
- */
-extern __attribute__((pure)) struct param_struct *params(void);
-#define params (params())
-
-#ifndef STANDALONE_DEBUG 
-static unsigned long video_num_cols;
-static unsigned long video_num_rows;
-static unsigned long video_x;
-static unsigned long video_y;
-static unsigned char bytes_per_char_v;
-static int white;
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	extern void ll_write_char(char *, char c, char white);
-	int x,y;
-	char *ptr;
-
-	x = video_x;
-	y = video_y;
-
-	if (c == '\n') {
-		if (++y >= video_num_rows)
-			y--;
-	} else if (c == '\r') {
-		x = 0;
-	} else {
-		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
-		ll_write_char(ptr, c, white);
-		if (++x >= video_num_cols) {
-			x = 0;
-			if ( ++y >= video_num_rows ) {
-				y--;
-			}
-		}
-	}
-
-	video_x = x;
-	video_y = y;
-}
-
-static inline void flush(void)
-{
-}
-
-static void error(char *x);
-
-/*
- * Setup for decompression
- */
-static void arch_decomp_setup(void)
-{
-	int i;
-	struct tag *t = (struct tag *)params;
-	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
-
-	if (t->hdr.tag == ATAG_CORE)
-	{
-		for (; t->hdr.size; t = tag_next(t))
-		{
-			if (t->hdr.tag == ATAG_VIDEOTEXT)
-			{
-				video_num_rows = t->u.videotext.video_lines;
-				video_num_cols = t->u.videotext.video_cols;
-				bytes_per_char_h = t->u.videotext.video_points;
-				bytes_per_char_v = t->u.videotext.video_points;
-				video_x = t->u.videotext.x;
-				video_y = t->u.videotext.y;
-			}
-
-			if (t->hdr.tag == ATAG_MEM)
-			{
-				page_size = PAGE_SIZE;
-				nr_pages += (t->u.mem.size / PAGE_SIZE);
-			}
-		}
-	}
-	else
-	{
-		nr_pages = params->nr_pages;
-		page_size = params->page_size;
-		video_num_rows = params->video_num_rows;
-		video_num_cols = params->video_num_cols;
-		video_x = params->video_x;
-		video_y = params->video_y;
-		bytes_per_char_h = params->bytes_per_char_h;
-		bytes_per_char_v = params->bytes_per_char_v;
-	}
-
-	video_size_row = video_num_cols * bytes_per_char_h;
-	
-	if (bytes_per_char_h == 4)
-		for (i = 0; i < 256; i++)
-			con_charconvtable[i] =
-				(i & 128 ? 1 << 0  : 0) |
-				(i & 64  ? 1 << 4  : 0) |
-				(i & 32  ? 1 << 8  : 0) |
-				(i & 16  ? 1 << 12 : 0) |
-				(i & 8   ? 1 << 16 : 0) |
-				(i & 4   ? 1 << 20 : 0) |
-				(i & 2   ? 1 << 24 : 0) |
-				(i & 1   ? 1 << 28 : 0);
-	else
-		for (i = 0; i < 16; i++)
-			con_charconvtable[i] =
-				(i & 8   ? 1 << 0  : 0) |
-				(i & 4   ? 1 << 8  : 0) |
-				(i & 2   ? 1 << 16 : 0) |
-				(i & 1   ? 1 << 24 : 0);
-
-
-	palette_setpixel(0);
-	if (bytes_per_char_h == 1) {
-		palette_write (0);
-		palette_write (0x00ffffff);
-		for (i = 2; i < 256; i++)
-			palette_write (0);
-		white = 1;
-	} else {
-		for (i = 0; i < 256; i++)
-			palette_write (i < 16 ? palette_4[i] : 0);
-		white = 7;
-	}
-
-	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/include/asm-arm/arch-rpc/vmalloc.h
deleted file mode 100644
index 077046bb2f36..000000000000
--- a/include/asm-arm/arch-rpc/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-rpc/vmalloc.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/include/asm-arm/arch-s3c2400/map.h b/include/asm-arm/arch-s3c2400/map.h
deleted file mode 100644
index 1184d907b31e..000000000000
--- a/include/asm-arm/arch-s3c2400/map.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/map.h
- *
- * Copyright 2003,2007  Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright 2003, Lucas Correia Villa Real
- *
- * S3C2400 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C2400_PA_MEMCTRL	(0x14000000)
-#define S3C2400_PA_USBHOST	(0x14200000)
-#define S3C2400_PA_IRQ		(0x14400000)
-#define S3C2400_PA_DMA		(0x14600000)
-#define S3C2400_PA_CLKPWR	(0x14800000)
-#define S3C2400_PA_LCD		(0x14A00000)
-#define S3C2400_PA_UART		(0x15000000)
-#define S3C2400_PA_TIMER	(0x15100000)
-#define S3C2400_PA_USBDEV	(0x15200140)
-#define S3C2400_PA_WATCHDOG	(0x15300000)
-#define S3C2400_PA_IIC		(0x15400000)
-#define S3C2400_PA_IIS		(0x15508000)
-#define S3C2400_PA_GPIO		(0x15600000)
-#define S3C2400_PA_RTC		(0x15700040)
-#define S3C2400_PA_ADC		(0x15800000)
-#define S3C2400_PA_SPI		(0x15900000)
-
-#define S3C2400_PA_MMC		(0x15A00000)
-#define S3C2400_SZ_MMC		SZ_1M
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2400_CS0	(0x00000000)
-#define S3C2400_CS1	(0x02000000)
-#define S3C2400_CS2	(0x04000000)
-#define S3C2400_CS3	(0x06000000)
-#define S3C2400_CS4	(0x08000000)
-#define S3C2400_CS5	(0x0A000000)
-#define S3C2400_CS6	(0x0C000000)
-#define S3C2400_CS7	(0x0E000000)
-
-#define S3C2400_SDRAM_PA    (S3C2400_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
-#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
-#define S3C24XX_PA_DMA		S3C2400_PA_DMA
-#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
-#define S3C24XX_PA_LCD		S3C2400_PA_LCD
-#define S3C24XX_PA_UART		S3C2400_PA_UART
-#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
-#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
-#define S3C24XX_PA_IIC		S3C2400_PA_IIC
-#define S3C24XX_PA_IIS		S3C2400_PA_IIS
-#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
-#define S3C24XX_PA_RTC		S3C2400_PA_RTC
-#define S3C24XX_PA_ADC		S3C2400_PA_ADC
-#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/include/asm-arm/arch-s3c2400/memory.h b/include/asm-arm/arch-s3c2400/memory.h
deleted file mode 100644
index fb0381dde704..000000000000
--- a/include/asm-arm/arch-s3c2400/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2400/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x0C000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h
deleted file mode 100644
index 168b93fee529..000000000000
--- a/include/asm-arm/arch-s3c2410/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL		(0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h
deleted file mode 100644
index cd77a70d45c0..000000000000
--- a/include/asm-arm/arch-s3c2410/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0       IRQ_EINT2
-#define IRQ_IDE1       IRQ_EINT3
-#define IRQ_ASIX       IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h
deleted file mode 100644
index 830d114261da..000000000000
--- a/include/asm-arm/arch-s3c2410/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
-#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
-#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h
deleted file mode 100644
index 0a6977fb5770..000000000000
--- a/include/asm-arm/arch-s3c2410/audio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/audio.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Audio platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_AUDIO_H
-#define __ASM_ARCH_AUDIO_H __FILE__
-
-/* struct s3c24xx_iis_ops
- *
- * called from the s3c24xx audio core to deal with the architecture
- * or the codec's setup and control.
- *
- * the pointer to itself is passed through in case the caller wants to
- * embed this in an larger structure for easy reference to it's context.
-*/
-
-struct s3c24xx_iis_ops {
-	struct module *owner;
-
-	int	(*startup)(struct s3c24xx_iis_ops *me);
-	void	(*shutdown)(struct s3c24xx_iis_ops *me);
-	int	(*suspend)(struct s3c24xx_iis_ops *me);
-	int	(*resume)(struct s3c24xx_iis_ops *me);
-
-	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
-};
-
-struct s3c24xx_platdata_iis {
-	const char		*codec_clk;
-	struct s3c24xx_iis_ops	*ops;
-	int			(*match_dev)(struct device *dev);
-};
-
-#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h
deleted file mode 100644
index 034d2c5a47c4..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
-#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
-#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
-#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND       (0x04)
-#define BAST_CPLD_CTLR2_IDERST      (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT	    (0x01)
-#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
-#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
-#define BAST_CPLD_DMA0_SECIDE      (1<<0)
-#define BAST_CPLD_DMA0_ISA15       (2<<0)
-#define BAST_CPLD_DMA0_ISA36       (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
-#define BAST_CPLD_DMA1_SECIDE      (1<<2)
-#define BAST_CPLD_DMA1_ISA15       (2<<2)
-#define BAST_CPLD_DMA1_ISA36       (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h
deleted file mode 100644
index 726c0466f85a..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC      IRQ_EINT18
-#define IRQ_IDE0       IRQ_EINT16
-#define IRQ_IDE1       IRQ_EINT17
-#define IRQ_PCSERIAL1  IRQ_EINT15
-#define IRQ_PCSERIAL2  IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX       IRQ_EINT11
-#define IRQ_DM9000     IRQ_EINT10
-#define IRQ_ISA	       IRQ_EINT9
-#define IRQ_SMALERT    IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h
deleted file mode 100644
index 86ac1c108db8..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-map.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
-#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
-#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
-#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
-#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1     (0x8800000)
-#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1     (0x8000000)
-#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1    (0x9800000)
-#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1    (0x9000000)
-#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2     (0xA800000)
-#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2     (0xA000000)
-#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2    (0xB800000)
-#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2    (0xB000000)
-#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO	  (0x00000000)
-#define BAST_PA_ASIXNET	  (0x01000000)
-#define BAST_PA_SUPERIO	  (0x01800000)
-#define BAST_PA_IDEPRI	  (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC	  (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM	  (0x04000000)
-#define BAST_PA_DM9000	  (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/*  */
-
-#define BAST_ASIXNET_CS  BAST_VAM_CS5
-#define BAST_IDE_CS	 BAST_VAM_CS5
-#define BAST_DM9000_CS	 BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h
deleted file mode 100644
index 37a11fe54a78..000000000000
--- a/include/asm-arm/arch-s3c2410/bast-pmu.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@simtec.co.uk>
- *
- * Machine BAST - Power Management chip
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTPMU_H
-#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
-
-#define BASTPMU_REG_IDENT	(0x00)
-#define BASTPMU_REG_VERSION	(0x01)
-#define BASTPMU_REG_DDCCTRL	(0x02)
-#define BASTPMU_REG_POWER	(0x03)
-#define BASTPMU_REG_RESET	(0x04)
-#define BASTPMU_REG_GWO		(0x05)
-#define BASTPMU_REG_WOL		(0x06)
-#define BASTPMU_REG_WOR		(0x07)
-#define BASTPMU_REG_UID		(0x09)
-
-#define BASTPMU_EEPROM		(0xC0)
-
-#define BASTPMU_EEP_UID		(BASTPMU_EEPROM + 0)
-#define BASTPMU_EEP_WOL		(BASTPMU_EEPROM + 8)
-#define BASTPMU_EEP_WOR		(BASTPMU_EEPROM + 9)
-
-#define BASTPMU_IDENT_0		0x53
-#define BASTPMU_IDENT_1		0x42
-#define BASTPMU_IDENT_2		0x50
-#define BASTPMU_IDENT_3		0x4d
-
-#define BASTPMU_RESET_GUARD	(0x55)
-
-#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
deleted file mode 100644
index 89076c322726..000000000000
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/plat-s3c/regs-serial.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-	.macro addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-	.macro fifo_full_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	1004f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		moveq	\rd, \rd, lsr #SHIFT_2440TXF
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-/* fifo level reading */
-
-	.macro fifo_level_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	10000f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-
-10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-	.endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <asm/plat-s3c/debug-macro.S>
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
deleted file mode 100644
index 4f291d9b7d93..000000000000
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/dma.h
- *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C241XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/sysdev.h>
-#include <asm/hardware.h>
-
-/*
- * This is the maximum DMA address(physical address) that can be DMAd to.
- *
- */
-#define MAX_DMA_ADDRESS		0x40000000
-#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependant on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
-	DMACH_XD0,
-	DMACH_XD1,
-	DMACH_SDI,
-	DMACH_SPI0,
-	DMACH_SPI1,
-	DMACH_UART0,
-	DMACH_UART1,
-	DMACH_UART2,
-	DMACH_TIMER,
-	DMACH_I2S_IN,
-	DMACH_I2S_OUT,
-	DMACH_PCM_IN,
-	DMACH_PCM_OUT,
-	DMACH_MIC_IN,
-	DMACH_USB_EP1,
-	DMACH_USB_EP2,
-	DMACH_USB_EP3,
-	DMACH_USB_EP4,
-	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
-	DMACH_UART1_SRC2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,		/* s3c2443 has extra uart */
-	DMACH_UART3_SRC2,
-	DMACH_MAX,		/* the end entry */
-};
-
-#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
-
-/* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS		(4)
-#else
-#define S3C2410_DMA_CHANNELS		(6)
-#endif
-
-/* types */
-
-enum s3c2410_dma_state {
-	S3C2410_DMA_IDLE,
-	S3C2410_DMA_RUNNING,
-	S3C2410_DMA_PAUSED
-};
-
-
-/* enum s3c2410_dma_loadst
- *
- * This represents the state of the DMA engine, wrt to the loaded / running
- * transfers. Since we don't have any way of knowing exactly the state of
- * the DMA transfers, we need to know the state to make decisions on wether
- * we can
- *
- * S3C2410_DMA_NONE
- *
- * There are no buffers loaded (the channel should be inactive)
- *
- * S3C2410_DMA_1LOADED
- *
- * There is one buffer loaded, however it has not been confirmed to be
- * loaded by the DMA engine. This may be because the channel is not
- * yet running, or the DMA driver decided that it was too costly to
- * sit and wait for it to happen.
- *
- * S3C2410_DMA_1RUNNING
- *
- * The buffer has been confirmed running, and not finisged
- *
- * S3C2410_DMA_1LOADED_1RUNNING
- *
- * There is a buffer waiting to be loaded by the DMA engine, and one
- * currently running.
-*/
-
-enum s3c2410_dma_loadst {
-	S3C2410_DMALOAD_NONE,
-	S3C2410_DMALOAD_1LOADED,
-	S3C2410_DMALOAD_1RUNNING,
-	S3C2410_DMALOAD_1LOADED_1RUNNING,
-};
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-/* flags */
-
-#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
-					    * waiting for reloads */
-#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
-
-/* dma buffer */
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-/* s3c2410_dma_buf_s
- *
- * internally used buffer structure to describe a queued or running
- * buffer.
-*/
-
-struct s3c2410_dma_buf;
-struct s3c2410_dma_buf {
-	struct s3c2410_dma_buf	*next;
-	int			 magic;		/* magic */
-	int			 size;		/* buffer size in bytes */
-	dma_addr_t		 data;		/* start of DMA data */
-	dma_addr_t		 ptr;		/* where the DMA got to [1] */
-	void			*id;		/* client's id */
-};
-
-/* [1] is this updated for both recv/send modes? */
-
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-struct s3c2410_dma_stats {
-	unsigned long		loads;
-	unsigned long		timeout_longest;
-	unsigned long		timeout_shortest;
-	unsigned long		timeout_avg;
-	unsigned long		timeout_failed;
-};
-
-struct s3c2410_dma_map;
-
-/* struct s3c2410_dma_chan
- *
- * full state information for each DMA channel
-*/
-
-struct s3c2410_dma_chan {
-	/* channel state flags and information */
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 irq_claimed; /* irq claimed for channel */
-	unsigned char		 irq_enabled; /* irq enabled for channel */
-	unsigned char		 xfer_unit;   /* size of an transfer */
-
-	/* channel state */
-
-	enum s3c2410_dma_state	 state;
-	enum s3c2410_dma_loadst	 load_state;
-	struct s3c2410_dma_client *client;
-
-	/* channel configuration */
-	enum s3c2410_dmasrc	 source;
-	unsigned long		 dev_addr;
-	unsigned long		 load_timeout;
-	unsigned int		 flags;		/* channel flags */
-	unsigned int		 hw_cfg;	/* last hw config */
-
-	struct s3c24xx_dma_map	*map;		/* channel hw maps */
-
-	/* channel's hardware position and configuration */
-	void __iomem		*regs;		/* channels registers */
-	void __iomem		*addr_reg;	/* data address register */
-	unsigned int		 irq;		/* channel irq */
-	unsigned long		 dcon;		/* default value of DCON */
-
-	/* driver handles */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* stats gathering */
-	struct s3c2410_dma_stats *stats;
-	struct s3c2410_dma_stats  stats_store;
-
-	/* buffer list and information */
-	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
-	struct s3c2410_dma_buf	*next;		/* next buffer to load */
-	struct s3c2410_dma_buf	*end;		/* end of queue */
-
-	/* system device */
-	struct sys_device	dev;
-};
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
-typedef unsigned long dma_device_t;
-
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(dmach_t channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(dmach_t channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(dmach_t channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC       (0x00)
-#define S3C2410_DMA_DISRCC      (0x04)
-#define S3C2410_DMA_DIDST       (0x08)
-#define S3C2410_DMA_DIDSTC      (0x0C)
-#define S3C2410_DMA_DCON        (0x10)
-#define S3C2410_DMA_DSTAT       (0x14)
-#define S3C2410_DMA_DCSRC       (0x18)
-#define S3C2410_DMA_DCDST       (0x1C)
-#define S3C2410_DMA_DMASKTRIG   (0x20)
-#define S3C2412_DMA_DMAREQSEL	(0x24)
-#define S3C2443_DMA_DMAREQSEL	(0x24)
-
-#define S3C2410_DISRCC_INC	(1<<0)
-#define S3C2410_DISRCC_APB	(1<<1)
-
-#define S3C2410_DMASKTRIG_STOP   (1<<2)
-#define S3C2410_DMASKTRIG_ON     (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND     (0<<31)
-#define S3C2410_DCON_HANDSHAKE  (1<<31)
-#define S3C2410_DCON_SYNC_PCLK  (0<<30)
-#define S3C2410_DCON_SYNC_HCLK  (1<<30)
-
-#define S3C2410_DCON_INTREQ     (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
-#define S3C2410_DCON_CH0_UART0	(1<<24)
-#define S3C2410_DCON_CH0_SDI	(2<<24)
-#define S3C2410_DCON_CH0_TIMER	(3<<24)
-#define S3C2410_DCON_CH0_USBEP1	(4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
-#define S3C2410_DCON_CH1_UART1	(1<<24)
-#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
-#define S3C2410_DCON_CH1_SPI	(3<<24)
-#define S3C2410_DCON_CH1_USBEP2	(4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
-#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
-#define S3C2410_DCON_CH2_SDI	(2<<24)
-#define S3C2410_DCON_CH2_TIMER	(3<<24)
-#define S3C2410_DCON_CH2_USBEP3	(4<<24)
-
-#define S3C2410_DCON_CH3_UART2	(0<<24)
-#define S3C2410_DCON_CH3_SDI	(1<<24)
-#define S3C2410_DCON_CH3_SPI	(2<<24)
-#define S3C2410_DCON_CH3_TIMER	(3<<24)
-#define S3C2410_DCON_CH3_USBEP4	(4<<24)
-
-#define S3C2410_DCON_SRCSHIFT   (24)
-#define S3C2410_DCON_SRCMASK	(7<<24)
-
-#define S3C2410_DCON_BYTE       (0<<20)
-#define S3C2410_DCON_HALFWORD   (1<<20)
-#define S3C2410_DCON_WORD       (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD   (1<<22)
-#define S3C2410_DCON_HWTRIG     (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT	(1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
-#define S3C2440_DCON_CH0_PCMIN	(6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
-#define S3C2440_DCON_CH1_SDI	(6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN	(5<<24)
-#define S3C2440_DCON_CH2_MICIN	(6<<24)
-
-#define S3C2440_DCON_CH3_MICIN	(5<<24)
-#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
deleted file mode 100644
index bbec0a8ff158..000000000000
--- a/include/asm-arm/arch-s3c2410/entry-macro.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-s3c2410/entry-macro.S
- *
- * Low-level IRQ helper macros for S3C2410-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
-*/
-
-#define INTPND		(0x10)
-#define INTOFFSET	(0x14)
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\base, #S3C24XX_VA_IRQ
-
-		@@ try the interrupt offset register, since it is there
-
-		ldr	\irqstat, [ \base, #INTPND ]
-		teq	\irqstat, #0
-		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
-		mov	\tmp, #1
-		tst	\irqstat, \tmp, lsl \irqnr
-		bne	1001f
-
-		@@ the number specified is not a valid irq, so try
-		@@ and work it out for ourselves
-
-		mov	\irqnr, #0		@@ start here
-
-		@@ work out which irq (if any) we got
-
-		movs	\tmp, \irqstat, lsl#16
-		addeq	\irqnr, \irqnr, #16
-		moveq	\irqstat, \irqstat, lsr#16
-		tst	\irqstat, #0xff
-		addeq	\irqnr, \irqnr, #8
-		moveq	\irqstat, \irqstat, lsr#8
-		tst	\irqstat, #0xf
-		addeq	\irqnr, \irqnr, #4
-		moveq	\irqstat, \irqstat, lsr#4
-		tst	\irqstat, #0x3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\irqstat, \irqstat, lsr#2
-		tst	\irqstat, #0x1
-		addeq	\irqnr, \irqnr, #1
-
-		@@ we have the value
-1001:
-		adds	\irqnr, \irqnr, #IRQ_EINT0
-1002:
-		@@ exit here, Z flag unset if IRQ
-
-	.endm
-
-		/* currently don't need an disable_fiq macro */
-
-		.macro	disable_fiq
-		.endm
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
deleted file mode 100644
index 5d0262601a7e..000000000000
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/fb.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-#include <asm/arch/regs-lcd.h>
-
-struct s3c2410fb_hw {
-	unsigned long	lcdcon1;
-	unsigned long	lcdcon2;
-	unsigned long	lcdcon3;
-	unsigned long	lcdcon4;
-	unsigned long	lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
-	/* LCD type */
-	unsigned type;
-
-	/* Screen size */
-	unsigned short width;
-	unsigned short height;
-
-	/* Screen info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned pixclock;		/* pixclock in picoseconds */
-	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
-
-	/* lcd configuration registers */
-	unsigned long	lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
-	struct s3c2410fb_display *displays;	/* attached diplays info */
-	unsigned num_displays;			/* number of defined displays */
-	unsigned default_display;
-
-	/* GPIOs */
-
-	unsigned long	gpcup;
-	unsigned long	gpcup_mask;
-	unsigned long	gpccon;
-	unsigned long	gpccon_mask;
-	unsigned long	gpdup;
-	unsigned long	gpdup_mask;
-	unsigned long	gpdcon;
-	unsigned long	gpdcon_mask;
-
-	/* lpc3600 control register */
-	unsigned long	lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h
deleted file mode 100644
index 18e10d2c35ea..000000000000
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/gpio.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-#include <asm-generic/gpio.h>
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h
deleted file mode 100644
index c3de5ab102eb..000000000000
--- a/include/asm-arm/arch-s3c2410/h1940-latch.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  iPAQ H1940 series - latch definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
-
-
-#ifndef __ASSEMBLY__
-#define H1940_LATCH		((void __force __iomem *)0xF8000000)
-#else
-#define H1940_LATCH		0xF8000000
-#endif
-
-#define H1940_PA_LATCH		(S3C2410_CS2)
-
-/* SD layer latch */
-
-#define H1940_LATCH_SDQ1		(1<<16)
-#define H1940_LATCH_LCD_P1		(1<<17)
-#define H1940_LATCH_LCD_P2		(1<<18)
-#define H1940_LATCH_LCD_P3		(1<<19)
-#define H1940_LATCH_MAX1698_nSHUTDOWN	(1<<20)		/* LCD backlight */
-#define H1940_LATCH_LED_RED		(1<<21)
-#define H1940_LATCH_SDQ7		(1<<22)
-#define H1940_LATCH_USB_DP		(1<<23)
-
-/* CPU layer latch */
-
-#define H1940_LATCH_UDA_POWER		(1<<24)
-#define H1940_LATCH_AUDIO_POWER		(1<<25)
-#define H1940_LATCH_SM803_ENABLE	(1<<26)
-#define H1940_LATCH_LCD_P4		(1<<27)
-#define H1940_LATCH_CPUQ5		(1<<28)		/* untraced */
-#define H1940_LATCH_BLUETOOTH_POWER	(1<<29)		/* active high */
-#define H1940_LATCH_LED_GREEN		(1<<30)
-#define H1940_LATCH_LED_FLASH		(1<<31)
-
-/* default settings */
-
-#define H1940_LATCH_DEFAULT		\
-	H1940_LATCH_LCD_P4		| \
-	H1940_LATCH_SM803_ENABLE	| \
-	H1940_LATCH_SDQ1		| \
-	H1940_LATCH_LCD_P1		| \
-	H1940_LATCH_LCD_P2		| \
-	H1940_LATCH_LCD_P3		| \
-	H1940_LATCH_MAX1698_nSHUTDOWN   | \
-	H1940_LATCH_CPUQ5
-
-/* control functions */
-
-extern void h1940_latch_control(unsigned int clear, unsigned int set);
-
-#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h
deleted file mode 100644
index 6135592e60f2..000000000000
--- a/include/asm-arm/arch-s3c2410/h1940.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT		(0x30081000)
-#define H1940_SUSPEND_CHECK		(0x30080000)
-
-extern void h1940_pm_return(void);
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
deleted file mode 100644
index 29592c3ebf22..000000000000
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/hardware.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASM_HARDWARE_H
-#error "Do not include this directly, instead #include <asm/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/sizes.h>
-#include <asm/arch/map.h>
-
-/* machine specific hardware definitions should go after this */
-
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h
deleted file mode 100644
index eed450608f9c..000000000000
--- a/include/asm-arm/arch-s3c2410/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
deleted file mode 100644
index 6b35a4f2630e..000000000000
--- a/include/asm-arm/arch-s3c2410/io.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * linux/include/asm-arm/arch-s3c2410/io.h
- *  from linux/include/asm-arm/arch-rpc/io.h
- *
- * Copyright (C) 1997 Russell King
- *	     (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
- * and are translated to the start of IO.  Note that all addresses are
- * not shifted left!
- */
-
-#define __PORT_PCIO(x)	((x) < (1<<28))
-
-#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
-#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-
-#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
-static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
-{ \
-	unsigned long temp;				      \
-	__asm__ __volatile__(				      \
-	"cmp	%2, #(1<<28)\n\t"			      \
-	"mov	%0, %2\n\t"				      \
-	"addcc	%0, %0, %3\n\t"				      \
-	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
-	: "=&r" (temp)					      \
-	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
-	: "cc");					      \
-}
-
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{									\
-	unsigned long temp, value;					\
-	__asm__ __volatile__(						\
-	"cmp	%2, #(1<<28)\n\t"					\
-	"mov	%0, %2\n\t"						\
-	"addcc	%0, %0, %3\n\t"						\
-	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
-	: "=&r" (temp), "=r" (value)					\
-	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
-	: "cc");							\
-	return (unsigned sz)value;					\
-}
-
-static inline void __iomem *__ioaddr (unsigned long port)
-{
-	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr) \
-	DECLARE_DYN_OUT(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"h")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)						\
-({									\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, %2]	@ outbc"			\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, #0]	@ outbc"			\
-		: : "r" (value), "r" ((port)));				\
-})
-
-#define __inbc(port)							\
-({									\
-	unsigned char result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, %2]	@ inbc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, #0]	@ inbc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outwc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256)			\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			     "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, #0]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + (port)));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"strh	%0, [%1, #0]	@ outwc"			\
-		: : "r" (v), "r" ((port)));				\
-})
-
-#define __inwc(port)							\
-({									\
-	unsigned short result;						\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256 )			\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE),				\
-			  "Jr" ((port)));				\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			  "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, #0]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port))));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"ldrh	%0, [%1, #0]	@ inwc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outlc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, %2]	@ outlc"			\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, #0]	@ outlc"			\
-		: : "r" (v), "r" ((port)));		\
-})
-
-#define __inlc(port)							\
-({									\
-	unsigned long result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, %2]	@ inlc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, #0]	@ inlc"				\
-		: "=r" (result) : "r" ((port)));		\
-	result;								\
-})
-
-#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
-
-#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
-#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
-#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-/* the following macro is deprecated */
-#define ioaddr(port)	__ioaddr((port))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-#define __mem_pci(x)	(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
deleted file mode 100644
index f5435d8c3769..000000000000
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/irqs.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#ifndef __ASM_ARM_IRQ_H
-#error "Do not include this directly, instead #include <asm/irq.h>"
-#endif
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET	 (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
-#define IRQ_EINT1      S3C2410_IRQ(1)
-#define IRQ_EINT2      S3C2410_IRQ(2)
-#define IRQ_EINT3      S3C2410_IRQ(3)
-#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
-#define IRQ_EINT8t23   S3C2410_IRQ(5)
-#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT   S3C2410_IRQ(7)
-#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0     S3C2410_IRQ(10)
-#define IRQ_TIMER1     S3C2410_IRQ(11)
-#define IRQ_TIMER2     S3C2410_IRQ(12)
-#define IRQ_TIMER3     S3C2410_IRQ(13)
-#define IRQ_TIMER4     S3C2410_IRQ(14)
-#define IRQ_UART2      S3C2410_IRQ(15)
-#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1       S3C2410_IRQ(18)
-#define IRQ_DMA2       S3C2410_IRQ(19)
-#define IRQ_DMA3       S3C2410_IRQ(20)
-#define IRQ_SDI	       S3C2410_IRQ(21)
-#define IRQ_SPI0       S3C2410_IRQ(22)
-#define IRQ_UART1      S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
-#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
-#define IRQ_USBD       S3C2410_IRQ(25)
-#define IRQ_USBH       S3C2410_IRQ(26)
-#define IRQ_IIC	       S3C2410_IRQ(27)
-#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
-#define IRQ_SPI1       S3C2410_IRQ(29)
-#define IRQ_RTC	       S3C2410_IRQ(30)
-#define IRQ_ADCPARENT  S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
-#define IRQ_EINT5      S3C2410_IRQ(33)
-#define IRQ_EINT6      S3C2410_IRQ(34)
-#define IRQ_EINT7      S3C2410_IRQ(35)
-#define IRQ_EINT8      S3C2410_IRQ(36)
-#define IRQ_EINT9      S3C2410_IRQ(37)
-#define IRQ_EINT10     S3C2410_IRQ(38)
-#define IRQ_EINT11     S3C2410_IRQ(39)
-#define IRQ_EINT12     S3C2410_IRQ(40)
-#define IRQ_EINT13     S3C2410_IRQ(41)
-#define IRQ_EINT14     S3C2410_IRQ(42)
-#define IRQ_EINT15     S3C2410_IRQ(43)
-#define IRQ_EINT16     S3C2410_IRQ(44)
-#define IRQ_EINT17     S3C2410_IRQ(45)
-#define IRQ_EINT18     S3C2410_IRQ(46)
-#define IRQ_EINT19     S3C2410_IRQ(47)
-#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
-#define IRQ_EINT21     S3C2410_IRQ(49)
-#define IRQ_EINT22     S3C2410_IRQ(50)
-#define IRQ_EINT23     S3C2410_IRQ(51)
-
-
-#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
-
-#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
-#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
-#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
-#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
-
-#define IRQ_TC			S3C2410_IRQSUB(9)
-#define IRQ_ADC			S3C2410_IRQSUB(10)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
-
-/* extra irqs for s3c2440 */
-
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
-#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
-#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
-
-#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
-
-#ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
-#else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START		IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h
deleted file mode 100644
index 800846ebddba..000000000000
--- a/include/asm-arm/arch-s3c2410/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
-
-struct s3c24xx_led_platdata {
-	unsigned int		 gpio;
-	unsigned int		 flags;
-
-	char			*name;
-	char			*def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
deleted file mode 100644
index b33ed3b05ef5..000000000000
--- a/include/asm-arm/arch-s3c2410/map.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/map.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include <asm/plat-s3c/map.h>
-
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
-#define S3C2410_PA_IRQ	   (0x4A000000)
-#define S3C24XX_SZ_IRQ	   SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-#define S3C24XX_SZ_USBHOST SZ_1M
-
-/* DMA controller */
-#define S3C2410_PA_DMA	   (0x4B000000)
-#define S3C24XX_SZ_DMA	   SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
-#define S3C2410_PA_CLKPWR  (0x4C000000)
-#define S3C24XX_SZ_CLKPWR  SZ_1M
-
-/* LCD controller */
-#define S3C2410_PA_LCD	   (0x4D000000)
-#define S3C24XX_SZ_LCD	   SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND	   (0x4E000000)
-#define S3C24XX_SZ_NAND	   SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART	   S3C_VA_UART
-#define S3C2410_PA_UART	   (0x50000000)
-#define S3C24XX_SZ_UART	   SZ_1M
-
-/* Timers */
-#define S3C24XX_VA_TIMER   S3C_VA_TIMER
-#define S3C2410_PA_TIMER   (0x51000000)
-#define S3C24XX_SZ_TIMER   SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV  (0x52000000)
-#define S3C24XX_SZ_USBDEV  SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC	   (0x54000000)
-#define S3C24XX_SZ_IIC	   SZ_1M
-
-/* IIS controller */
-#define S3C2410_PA_IIS	   (0x55000000)
-#define S3C24XX_SZ_IIS	   SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO	   (0x56000000)
-#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO	   SZ_1M
-
-/* RTC */
-#define S3C2410_PA_RTC	   (0x57000000)
-#define S3C24XX_SZ_RTC	   SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC	   (0x58000000)
-#define S3C24XX_SZ_ADC	   SZ_1M
-
-/* SPI */
-#define S3C2410_PA_SPI	   (0x59000000)
-#define S3C24XX_SZ_SPI	   SZ_1M
-
-/* SDI */
-#define S3C2410_PA_SDI	   (0x5A000000)
-#define S3C24XX_SZ_SDI	   SZ_1M
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF   (0x4F000000)
-#define S3C2440_SZ_CAMIF   SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97	   (0x5B000000)
-#define S3C2440_SZ_AC97	   SZ_1M
-
-/* S3C2443 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2443_SZ_HSMMC   (256)
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA    (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
-#define S3C24XX_PA_DMA      S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_UART     S3C2410_PA_UART
-#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIC      S3C2410_PA_IIC
-#define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
-#define S3C24XX_PA_RTC      S3C2410_PA_RTC
-#define S3C24XX_PA_ADC      S3C2410_PA_ADC
-#define S3C24XX_PA_SPI      S3C2410_PA_SPI
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
deleted file mode 100644
index 533e2436e707..000000000000
--- a/include/asm-arm/arch-s3c2410/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/memory.h
- *  from linux/include/asm-arm/arch-rpc/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET	UL(0x30000000)
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h
deleted file mode 100644
index 229ab2351db6..000000000000
--- a/include/asm-arm/arch-s3c2410/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL		(0x3)
-#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
-#define OSIRIS_CTRL0_PCMCIA		(1<<4)
-#define OSIRIS_CTRL0_FIX8		(1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
-
-#define OSIRIS_CTRL1_FIX8		(1<<0)
-
-#define OSIRIS_ID_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h
deleted file mode 100644
index b5c74d2b9aaa..000000000000
--- a/include/asm-arm/arch-s3c2410/osiris-map.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
- *
- * (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
-
-#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
-#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
-
-#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
-#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
-
-#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
-#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
-#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
-#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
-
-#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h
deleted file mode 100644
index e40c93429854..000000000000
--- a/include/asm-arm/arch-s3c2410/otom-map.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/otom-map.h
- *
- * (c) 2005 Guillaume GOURAT / NexVision
- *          guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
-
-#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
-
-#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
deleted file mode 100644
index 37661358b42b..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
- *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
-
-#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
-#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
-#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
-#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
-#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
-#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
-
-#define S3C2410_CLKCON_IDLE	     (1<<2)
-#define S3C2410_CLKCON_POWER	     (1<<3)
-#define S3C2410_CLKCON_NAND	     (1<<4)
-#define S3C2410_CLKCON_LCDC	     (1<<5)
-#define S3C2410_CLKCON_USBH	     (1<<6)
-#define S3C2410_CLKCON_USBD	     (1<<7)
-#define S3C2410_CLKCON_PWMT	     (1<<8)
-#define S3C2410_CLKCON_SDI	     (1<<9)
-#define S3C2410_CLKCON_UART0	     (1<<10)
-#define S3C2410_CLKCON_UART1	     (1<<11)
-#define S3C2410_CLKCON_UART2	     (1<<12)
-#define S3C2410_CLKCON_GPIO	     (1<<13)
-#define S3C2410_CLKCON_RTC	     (1<<14)
-#define S3C2410_CLKCON_ADC	     (1<<15)
-#define S3C2410_CLKCON_IIC	     (1<<16)
-#define S3C2410_CLKCON_IIS	     (1<<17)
-#define S3C2410_CLKCON_SPI	     (1<<18)
-
-#define S3C2410_PLLCON_MDIVSHIFT     12
-#define S3C2410_PLLCON_PDIVSHIFT     4
-#define S3C2410_PLLCON_SDIVSHIFT     0
-#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
-#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
-#define S3C2410_PLLCON_SDIVMASK	     3
-
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
-#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
-
-#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
-#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
-#define S3C2410_CLKSLOW_SLOW		(1<<4)
-#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
-
-#ifndef __ASSEMBLY__
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2410_PLLCON_MDIVMASK;
-	pdiv &= S3C2410_PLLCON_PDIVMASK;
-	sdiv &= S3C2410_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-/* extra registers */
-#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
-
-#define S3C2440_CLKCON_CAMERA        (1<<19)
-#define S3C2440_CLKCON_AC97          (1<<20)
-
-#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
-#define S3C2440_CLKDIVN_UCLK         (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
-#define S3C2440_CAMDIVN_DVSEN        (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
-
-#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-
-#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
-#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
-
-#define S3C2412_PLLCON_OFF		(1<<20)
-
-#define S3C2412_CLKDIVN_PDIVN		(1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
-#define S3C2412_CLKDIVN_DVSEN		(1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
-#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
-
-#define S3C2412_CLKCON_WDT		(1<<28)
-#define S3C2412_CLKCON_SPI		(1<<27)
-#define S3C2412_CLKCON_IIS		(1<<26)
-#define S3C2412_CLKCON_IIC		(1<<25)
-#define S3C2412_CLKCON_ADC		(1<<24)
-#define S3C2412_CLKCON_RTC		(1<<23)
-#define S3C2412_CLKCON_GPIO		(1<<22)
-#define S3C2412_CLKCON_UART2		(1<<21)
-#define S3C2412_CLKCON_UART1		(1<<20)
-#define S3C2412_CLKCON_UART0		(1<<19)
-#define S3C2412_CLKCON_SDI		(1<<18)
-#define S3C2412_CLKCON_PWMT		(1<<17)
-#define S3C2412_CLKCON_USBD		(1<<16)
-#define S3C2412_CLKCON_CAMCLK		(1<<15)
-#define S3C2412_CLKCON_UARTCLK		(1<<14)
-/* missing 13 */
-#define S3C2412_CLKCON_USB_HOST48	(1<<12)
-#define S3C2412_CLKCON_USB_DEV48	(1<<11)
-#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
-#define S3C2412_CLKCON_HCLKx2		(1<<9)
-#define S3C2412_CLKCON_SDRAM		(1<<8)
-/* missing 7 */
-#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
-#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
-#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
-#define S3C2412_CLKCON_DMA3		(1<<3)
-#define S3C2412_CLKCON_DMA2		(1<<2)
-#define S3C2412_CLKCON_DMA1		(1<<1)
-#define S3C2412_CLKCON_DMA0		(1<<0)
-
-/* clock sourec controls */
-
-#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
-#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
-#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
-#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
-#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
-#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
-#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
-#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
-#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
-#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
-#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
-
-#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
-
-#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
deleted file mode 100644
index 1235df70f34e..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440/S3C2412 Signal Drive Strength Control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
-
-#if defined(CONFIG_CPU_S3C2412)
-#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
-#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
-#endif
-
-#if defined(CONFIG_CPU_S3C244X)
-
-#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
-#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
-
-#define S3C2440_SELECT_DSC0 (0)
-#define S3C2440_SELECT_DSC1 (1<<31)
-
-#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
-
-#define S3C2440_DSC0_DISABLE	(1<<31)
-
-#define S3C2440_DSC0_ADDR       (S3C2440_SELECT_DSC0 | 8)
-#define S3C2440_DSC0_ADDR_12mA  (0<<8)
-#define S3C2440_DSC0_ADDR_10mA  (1<<8)
-#define S3C2440_DSC0_ADDR_8mA   (2<<8)
-#define S3C2440_DSC0_ADDR_6mA   (3<<8)
-#define S3C2440_DSC0_ADDR_MASK  (3<<8)
-
-/* D24..D31 */
-#define S3C2440_DSC0_DATA3      (S3C2440_SELECT_DSC0 | 6)
-#define S3C2440_DSC0_DATA3_12mA (0<<6)
-#define S3C2440_DSC0_DATA3_10mA (1<<6)
-#define S3C2440_DSC0_DATA3_8mA  (2<<6)
-#define S3C2440_DSC0_DATA3_6mA  (3<<6)
-#define S3C2440_DSC0_DATA3_MASK (3<<6)
-
-/* D16..D23 */
-#define S3C2440_DSC0_DATA2      (S3C2440_SELECT_DSC0 | 4)
-#define S3C2440_DSC0_DATA2_12mA (0<<4)
-#define S3C2440_DSC0_DATA2_10mA (1<<4)
-#define S3C2440_DSC0_DATA2_8mA  (2<<4)
-#define S3C2440_DSC0_DATA2_6mA  (3<<4)
-#define S3C2440_DSC0_DATA2_MASK (3<<4)
-
-/* D8..D15 */
-#define S3C2440_DSC0_DATA1      (S3C2440_SELECT_DSC0 | 2)
-#define S3C2440_DSC0_DATA1_12mA (0<<2)
-#define S3C2440_DSC0_DATA1_10mA (1<<2)
-#define S3C2440_DSC0_DATA1_8mA  (2<<2)
-#define S3C2440_DSC0_DATA1_6mA  (3<<2)
-#define S3C2440_DSC0_DATA1_MASK (3<<2)
-
-/* D0..D7 */
-#define S3C2440_DSC0_DATA0      (S3C2440_SELECT_DSC0 | 0)
-#define S3C2440_DSC0_DATA0_12mA (0<<0)
-#define S3C2440_DSC0_DATA0_10mA (1<<0)
-#define S3C2440_DSC0_DATA0_8mA  (2<<0)
-#define S3C2440_DSC0_DATA0_6mA  (3<<0)
-#define S3C2440_DSC0_DATA0_MASK (3<<0)
-
-#define S3C2440_DSC1_SCK1       (S3C2440_SELECT_DSC1 | 28)
-#define S3C2440_DSC1_SCK1_12mA  (0<<28)
-#define S3C2440_DSC1_SCK1_10mA  (1<<28)
-#define S3C2440_DSC1_SCK1_8mA   (2<<28)
-#define S3C2440_DSC1_SCK1_6mA   (3<<28)
-#define S3C2440_DSC1_SCK1_MASK  (3<<28)
-
-#define S3C2440_DSC1_SCK0       (S3C2440_SELECT_DSC1 | 26)
-#define S3C2440_DSC1_SCK0_12mA  (0<<26)
-#define S3C2440_DSC1_SCK0_10mA  (1<<26)
-#define S3C2440_DSC1_SCK0_8mA   (2<<26)
-#define S3C2440_DSC1_SCK0_6mA   (3<<26)
-#define S3C2440_DSC1_SCK0_MASK  (3<<26)
-
-#define S3C2440_DSC1_SCKE       (S3C2440_SELECT_DSC1 | 24)
-#define S3C2440_DSC1_SCKE_10mA  (0<<24)
-#define S3C2440_DSC1_SCKE_8mA   (1<<24)
-#define S3C2440_DSC1_SCKE_6mA   (2<<24)
-#define S3C2440_DSC1_SCKE_4mA   (3<<24)
-#define S3C2440_DSC1_SCKE_MASK  (3<<24)
-
-/* SDRAM nRAS/nCAS */
-#define S3C2440_DSC1_SDR        (S3C2440_SELECT_DSC1 | 22)
-#define S3C2440_DSC1_SDR_10mA   (0<<22)
-#define S3C2440_DSC1_SDR_8mA    (1<<22)
-#define S3C2440_DSC1_SDR_6mA    (2<<22)
-#define S3C2440_DSC1_SDR_4mA    (3<<22)
-#define S3C2440_DSC1_SDR_MASK   (3<<22)
-
-/* NAND Flash Controller */
-#define S3C2440_DSC1_NFC        (S3C2440_SELECT_DSC1 | 20)
-#define S3C2440_DSC1_NFC_10mA   (0<<20)
-#define S3C2440_DSC1_NFC_8mA    (1<<20)
-#define S3C2440_DSC1_NFC_6mA    (2<<20)
-#define S3C2440_DSC1_NFC_4mA    (3<<20)
-#define S3C2440_DSC1_NFC_MASK   (3<<20)
-
-/* nBE[0..3] */
-#define S3C2440_DSC1_nBE        (S3C2440_SELECT_DSC1 | 18)
-#define S3C2440_DSC1_nBE_10mA   (0<<18)
-#define S3C2440_DSC1_nBE_8mA    (1<<18)
-#define S3C2440_DSC1_nBE_6mA    (2<<18)
-#define S3C2440_DSC1_nBE_4mA    (3<<18)
-#define S3C2440_DSC1_nBE_MASK   (3<<18)
-
-#define S3C2440_DSC1_WOE        (S3C2440_SELECT_DSC1 | 16)
-#define S3C2440_DSC1_WOE_10mA   (0<<16)
-#define S3C2440_DSC1_WOE_8mA    (1<<16)
-#define S3C2440_DSC1_WOE_6mA    (2<<16)
-#define S3C2440_DSC1_WOE_4mA    (3<<16)
-#define S3C2440_DSC1_WOE_MASK   (3<<16)
-
-#define S3C2440_DSC1_CS7        (S3C2440_SELECT_DSC1 | 14)
-#define S3C2440_DSC1_CS7_10mA   (0<<14)
-#define S3C2440_DSC1_CS7_8mA    (1<<14)
-#define S3C2440_DSC1_CS7_6mA    (2<<14)
-#define S3C2440_DSC1_CS7_4mA    (3<<14)
-#define S3C2440_DSC1_CS7_MASK   (3<<14)
-
-#define S3C2440_DSC1_CS6        (S3C2440_SELECT_DSC1 | 12)
-#define S3C2440_DSC1_CS6_10mA   (0<<12)
-#define S3C2440_DSC1_CS6_8mA    (1<<12)
-#define S3C2440_DSC1_CS6_6mA    (2<<12)
-#define S3C2440_DSC1_CS6_4mA    (3<<12)
-#define S3C2440_DSC1_CS6_MASK   (3<<12)
-
-#define S3C2440_DSC1_CS5        (S3C2440_SELECT_DSC1 | 10)
-#define S3C2440_DSC1_CS5_10mA   (0<<10)
-#define S3C2440_DSC1_CS5_8mA    (1<<10)
-#define S3C2440_DSC1_CS5_6mA    (2<<10)
-#define S3C2440_DSC1_CS5_4mA    (3<<10)
-#define S3C2440_DSC1_CS5_MASK   (3<<10)
-
-#define S3C2440_DSC1_CS4        (S3C2440_SELECT_DSC1 | 8)
-#define S3C2440_DSC1_CS4_10mA   (0<<8)
-#define S3C2440_DSC1_CS4_8mA    (1<<8)
-#define S3C2440_DSC1_CS4_6mA    (2<<8)
-#define S3C2440_DSC1_CS4_4mA    (3<<8)
-#define S3C2440_DSC1_CS4_MASK   (3<<8)
-
-#define S3C2440_DSC1_CS3        (S3C2440_SELECT_DSC1 | 6)
-#define S3C2440_DSC1_CS3_10mA   (0<<6)
-#define S3C2440_DSC1_CS3_8mA    (1<<6)
-#define S3C2440_DSC1_CS3_6mA    (2<<6)
-#define S3C2440_DSC1_CS3_4mA    (3<<6)
-#define S3C2440_DSC1_CS3_MASK   (3<<6)
-
-#define S3C2440_DSC1_CS2        (S3C2440_SELECT_DSC1 | 4)
-#define S3C2440_DSC1_CS2_10mA   (0<<4)
-#define S3C2440_DSC1_CS2_8mA    (1<<4)
-#define S3C2440_DSC1_CS2_6mA    (2<<4)
-#define S3C2440_DSC1_CS2_4mA    (3<<4)
-#define S3C2440_DSC1_CS2_MASK   (3<<4)
-
-#define S3C2440_DSC1_CS1        (S3C2440_SELECT_DSC1 | 2)
-#define S3C2440_DSC1_CS1_10mA   (0<<2)
-#define S3C2440_DSC1_CS1_8mA    (1<<2)
-#define S3C2440_DSC1_CS1_6mA    (2<<2)
-#define S3C2440_DSC1_CS1_4mA    (3<<2)
-#define S3C2440_DSC1_CS1_MASK   (3<<2)
-
-#define S3C2440_DSC1_CS0        (S3C2440_SELECT_DSC1 | 0)
-#define S3C2440_DSC1_CS0_10mA   (0<<0)
-#define S3C2440_DSC1_CS0_8mA    (1<<0)
-#define S3C2440_DSC1_CS0_6mA    (2<<0)
-#define S3C2440_DSC1_CS0_4mA    (3<<0)
-#define S3C2440_DSC1_CS0_MASK   (3<<0)
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#endif	/* __ASM_ARCH_REGS_DSC_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
deleted file mode 100644
index 497dd06e2c99..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ /dev/null
@@ -1,1163 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 GPIO register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKA   (32*0)
-#define S3C2410_GPIO_BANKB   (32*1)
-#define S3C2410_GPIO_BANKC   (32*2)
-#define S3C2410_GPIO_BANKD   (32*3)
-#define S3C2410_GPIO_BANKE   (32*4)
-#define S3C2410_GPIO_BANKF   (32*5)
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
-
-#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
-#define S3C24XX_MISCCR        S3C2400_MISCCR
-#else
-#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
-#endif /* CONFIG_CPU_S3C2400 */
-
-
-/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
-
-#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
-#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
-#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
-                                 (2 * (S3C2400_BANKNUM(pin)-2)))
-
-#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
-                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
-                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
-
-
-#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
-#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
-#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
-#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- *          S3C2400: 18bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
-#define S3C2410_GPA0_ADDR0   (1<<0)
-
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
-#define S3C2410_GPA1_ADDR16  (1<<1)
-
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
-#define S3C2410_GPA2_ADDR17  (1<<2)
-
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
-#define S3C2410_GPA3_ADDR18  (1<<3)
-
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
-#define S3C2410_GPA4_ADDR19  (1<<4)
-
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
-#define S3C2410_GPA5_ADDR20  (1<<5)
-
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
-#define S3C2410_GPA6_ADDR21  (1<<6)
-
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
-#define S3C2410_GPA7_ADDR22  (1<<7)
-
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
-#define S3C2410_GPA8_ADDR23  (1<<8)
-
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
-#define S3C2410_GPA9_ADDR24  (1<<9)
-
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2400_GPA10_SCKE   (1<<10)
-
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2400_GPA11_nCAS0  (1<<11)
-
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
-#define S3C2410_GPA12_nGCS1  (1<<12)
-#define S3C2400_GPA12_nCAS1  (1<<12)
-
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
-#define S3C2410_GPA13_nGCS2  (1<<13)
-#define S3C2400_GPA13_nGCS1  (1<<13)
-
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
-#define S3C2410_GPA14_nGCS3  (1<<14)
-#define S3C2400_GPA14_nGCS2  (1<<14)
-
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
-#define S3C2410_GPA15_nGCS4  (1<<15)
-#define S3C2400_GPA15_nGCS3  (1<<15)
-
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
-#define S3C2410_GPA16_nGCS5  (1<<16)
-#define S3C2400_GPA16_nGCS4  (1<<16)
-
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
-#define S3C2410_GPA17_CLE    (1<<17)
-#define S3C2400_GPA17_nGCS5  (1<<17)
-
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
-#define S3C2410_GPA18_ALE    (1<<18)
-
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
-#define S3C2410_GPA19_nFWE   (1<<19)
-
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
-#define S3C2410_GPA20_nFRE   (1<<20)
-
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
-#define S3C2410_GPA22_nFCE   (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=special function, 11=reserved
-
- * S3C2400:
- * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=data, 11=special function
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
-
-#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
-#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
-#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
-#define S3C2410_GPB0_TOUT0   (0x02 << 0)
-#define S3C2400_GPB0_DATA16  (0x02 << 0)
-
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
-#define S3C2410_GPB1_TOUT1   (0x02 << 2)
-#define S3C2400_GPB1_DATA17  (0x02 << 2)
-
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
-#define S3C2410_GPB2_TOUT2   (0x02 << 4)
-#define S3C2400_GPB2_DATA18  (0x02 << 4)
-#define S3C2400_GPB2_TCLK1   (0x03 << 4)
-
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
-#define S3C2410_GPB3_TOUT3   (0x02 << 6)
-#define S3C2400_GPB3_DATA19  (0x02 << 6)
-#define S3C2400_GPB3_TXD1    (0x03 << 6)
-
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
-#define S3C2410_GPB4_TCLK0   (0x02 << 8)
-#define S3C2400_GPB4_DATA20  (0x02 << 8)
-#define S3C2410_GPB4_MASK    (0x03 << 8)
-#define S3C2400_GPB4_RXD1    (0x03 << 8)
-#define S3C2400_GPB4_MASK    (0x03 << 8)
-
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
-#define S3C2410_GPB5_nXBACK  (0x02 << 10)
-#define S3C2443_GPB5_XBACK   (0x03 << 10)
-#define S3C2400_GPB5_DATA21  (0x02 << 10)
-#define S3C2400_GPB5_nCTS1   (0x03 << 10)
-
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
-#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
-#define S3C2443_GPB6_XBREQ   (0x03 << 12)
-#define S3C2400_GPB6_DATA22  (0x02 << 12)
-#define S3C2400_GPB6_nRTS1   (0x03 << 12)
-
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1  (0x03 << 14)
-#define S3C2400_GPB7_DATA23  (0x02 << 14)
-
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-#define S3C2400_GPB8_DATA24  (0x02 << 16)
-
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0  (0x03 << 18)
-#define S3C2400_GPB9_DATA25  (0x02 << 18)
-#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
-
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-#define S3C2400_GPB10_DATA26 (0x02 << 20)
-#define S3C2400_GPB10_nSS    (0x03 << 20)
-
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
-#define S3C2400_GPB11_INP    (0x00 << 22)
-#define S3C2400_GPB11_OUTP   (0x01 << 22)
-#define S3C2400_GPB11_DATA27 (0x02 << 22)
-
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
-#define S3C2400_GPB12_INP    (0x00 << 24)
-#define S3C2400_GPB12_OUTP   (0x01 << 24)
-#define S3C2400_GPB12_DATA28 (0x02 << 24)
-
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
-#define S3C2400_GPB13_INP    (0x00 << 26)
-#define S3C2400_GPB13_OUTP   (0x01 << 26)
-#define S3C2400_GPB13_DATA29 (0x02 << 26)
-
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
-#define S3C2400_GPB14_INP    (0x00 << 28)
-#define S3C2400_GPB14_OUTP   (0x01 << 28)
-#define S3C2400_GPB14_DATA30 (0x02 << 28)
-
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
-#define S3C2400_GPB15_INP    (0x00 << 30)
-#define S3C2400_GPB15_OUTP   (0x01 << 30)
-#define S3C2400_GPB15_DATA31 (0x02 << 30)
-
-#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
-
-#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
-#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
-#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
-
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
-#define S3C2410_GPC0_LEND	(0x02 << 0)
-#define S3C2400_GPC0_VD0 	(0x02 << 0)
-
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
-#define S3C2410_GPC1_VCLK	(0x02 << 2)
-#define S3C2400_GPC1_VD1 	(0x02 << 2)
-
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
-#define S3C2410_GPC2_VLINE	(0x02 << 4)
-#define S3C2400_GPC2_VD2  	(0x02 << 4)
-
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
-#define S3C2410_GPC3_VFRAME	(0x02 << 6)
-#define S3C2400_GPC3_VD3   	(0x02 << 6)
-
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
-#define S3C2410_GPC4_VM		(0x02 << 8)
-#define S3C2400_GPC4_VD4	(0x02 << 8)
-
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
-#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
-#define S3C2400_GPC5_VD5   	(0x02 << 10)
-
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
-#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
-#define S3C2400_GPC6_VD6   	(0x02 << 12)
-
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
-#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
-#define S3C2400_GPC7_VD7   	(0x02 << 14)
-
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
-#define S3C2410_GPC8_VD0	(0x02 << 16)
-#define S3C2400_GPC8_VD8	(0x02 << 16)
-
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
-#define S3C2410_GPC9_VD1	(0x02 << 18)
-#define S3C2400_GPC9_VD9	(0x02 << 18)
-
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
-#define S3C2410_GPC10_VD2	(0x02 << 20)
-#define S3C2400_GPC10_VD10	(0x02 << 20)
-
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
-#define S3C2410_GPC11_VD3	(0x02 << 22)
-#define S3C2400_GPC11_VD11	(0x02 << 22)
-
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
-#define S3C2410_GPC12_VD4	(0x02 << 24)
-#define S3C2400_GPC12_VD12	(0x02 << 24)
-
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
-#define S3C2410_GPC13_VD5	(0x02 << 26)
-#define S3C2400_GPC13_VD13	(0x02 << 26)
-
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
-#define S3C2410_GPC14_VD6	(0x02 << 28)
-#define S3C2400_GPC14_VD14	(0x02 << 28)
-
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
-#define S3C2410_GPC15_VD7	(0x02 << 30)
-#define S3C2400_GPC15_VD15	(0x02 << 30)
-
-#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * S3C2400: Port D consists of 11 GPIO/Special function
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
-
-#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
-#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
-
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
-#define S3C2410_GPD0_VD8	(0x02 << 0)
-#define S3C2400_GPD0_VFRAME	(0x02 << 0)
-#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
-
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
-#define S3C2410_GPD1_VD9	(0x02 << 2)
-#define S3C2400_GPD1_VM		(0x02 << 2)
-#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
-
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
-#define S3C2410_GPD2_VD10	(0x02 << 4)
-#define S3C2400_GPD2_VLINE	(0x02 << 4)
-
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
-#define S3C2410_GPD3_VD11	(0x02 << 6)
-#define S3C2400_GPD3_VCLK	(0x02 << 6)
-
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
-#define S3C2410_GPD4_VD12	(0x02 << 8)
-#define S3C2400_GPD4_LEND	(0x02 << 8)
-
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
-#define S3C2410_GPD5_VD13	(0x02 << 10)
-#define S3C2400_GPD5_TOUT0	(0x02 << 10)
-
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
-#define S3C2410_GPD6_VD14	(0x02 << 12)
-#define S3C2400_GPD6_TOUT1	(0x02 << 12)
-
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
-#define S3C2410_GPD7_VD15	(0x02 << 14)
-#define S3C2400_GPD7_TOUT2	(0x02 << 14)
-
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
-#define S3C2410_GPD8_VD16	(0x02 << 16)
-#define S3C2400_GPD8_TOUT3	(0x02 << 16)
-
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
-#define S3C2410_GPD9_VD17	(0x02 << 18)
-#define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
-
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
-#define S3C2410_GPD10_VD18	(0x02 << 20)
-#define S3C2400_GPD10_nWAIT	(0x02 << 20)
-
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
-#define S3C2410_GPD11_VD19	(0x02 << 22)
-
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
-#define S3C2410_GPD12_VD20	(0x02 << 24)
-
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
-#define S3C2410_GPD13_VD21	(0x02 << 26)
-
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
-#define S3C2410_GPD14_VD22	(0x02 << 28)
-#define S3C2410_GPD14_nSS1	(0x03 << 28)
-
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
-#define S3C2410_GPD15_VD23	(0x02 << 30)
-#define S3C2410_GPD15_nSS0	(0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * S3C2400:
- * Port E consists of 12 GPIO/Special function
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
-
-#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
-#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
-#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
-
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
-#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2400_GPE0_EINT0     (0x02 << 0)
-#define S3C2410_GPE0_MASK      (0x03 << 0)
-
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
-#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
-#define S3C2400_GPE1_EINT1     (0x02 << 2)
-#define S3C2400_GPE1_nSS       (0x03 << 2)
-#define S3C2410_GPE1_MASK      (0x03 << 2)
-
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
-#define S3C2410_GPE2_CDCLK     (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-#define S3C2400_GPE2_EINT2     (0x02 << 4)
-#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
-
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
-#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
-#define S3C2400_GPE3_EINT3     (0x02 << 6)
-#define S3C2400_GPE3_nCTS1     (0x03 << 6)
-#define S3C2410_GPE3_nSS0      (0x03 << 6)
-#define S3C2410_GPE3_MASK      (0x03 << 6)
-
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
-#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
-#define S3C2400_GPE4_EINT4     (0x02 << 8)
-#define S3C2400_GPE4_nRTS1     (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
-#define S3C2410_GPE4_MASK      (0x03 << 8)
-
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
-#define S3C2410_GPE5_SDCLK     (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
-#define S3C2400_GPE5_EINT5     (0x02 << 10)
-#define S3C2400_GPE5_TCLK1     (0x03 << 10)
-
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
-#define S3C2410_GPE6_SDCMD     (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
-#define S3C2400_GPE6_EINT6     (0x02 << 12)
-
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
-#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
-#define S3C2400_GPE7_EINT7     (0x02 << 14)
-
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
-#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
-#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
-
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
-#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
-#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
-#define S3C2400_GPE9_nXBACK    (0x03 << 18)
-
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
-#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
-#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
-
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
-#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
-
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
-#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
-
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
-#define S3C2410_GPE14_IICSCL   (0x02 << 28)
-#define S3C2410_GPE14_MASK     (0x03 << 28)
-
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
-#define S3C2410_GPE15_IICSDA   (0x02 << 30)
-#define S3C2410_GPE15_MASK     (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
-#define S3C2440_GPE2_ACRESET   (0x03 << 4)
-#define S3C2440_GPE3_ACIN      (0x03 << 6)
-#define S3C2440_GPE4_ACOUT     (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port F consists of 7 GPIO/Special function
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
-
-#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
-#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
-#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
-
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
-#define S3C2410_GPF0_EINT0  (0x02 << 0)
-#define S3C2400_GPF0_RXD0   (0x02 << 0)
-
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
-#define S3C2410_GPF1_EINT1  (0x02 << 2)
-#define S3C2400_GPF1_RXD1   (0x02 << 2)
-#define S3C2400_GPF1_IICSDA (0x03 << 2)
-
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
-#define S3C2410_GPF2_EINT2  (0x02 << 4)
-#define S3C2400_GPF2_TXD0   (0x02 << 4)
-
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
-#define S3C2410_GPF3_EINT3  (0x02 << 6)
-#define S3C2400_GPF3_TXD1   (0x02 << 6)
-#define S3C2400_GPF3_IICSCL (0x03 << 6)
-
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
-#define S3C2410_GPF4_EINT4  (0x02 << 8)
-#define S3C2400_GPF4_nRTS0  (0x02 << 8)
-#define S3C2400_GPF4_nXBACK (0x03 << 8)
-
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
-#define S3C2410_GPF5_EINT5  (0x02 << 10)
-#define S3C2400_GPF5_nCTS0  (0x02 << 10)
-#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
-#define S3C2410_GPF6_EINT6  (0x02 << 12)
-#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
-#define S3C2410_GPF7_EINT7  (0x02 << 14)
-
-#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
- *
- * S3C2400:
- * Port G consists of 10 GPIO/Special function
-*/
-
-#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
-
-#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
-#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
-#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
-
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
-#define S3C2410_GPG0_EINT8    (0x02 << 0)
-#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
-
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
-#define S3C2410_GPG1_EINT9    (0x02 << 2)
-#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
-
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
-#define S3C2410_GPG2_EINT10   (0x02 << 4)
-#define S3C2410_GPG2_nSS0     (0x03 << 4)
-#define S3C2400_GPG2_CDCLK    (0x02 << 4)
-
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
-#define S3C2410_GPG3_EINT11   (0x02 << 6)
-#define S3C2410_GPG3_nSS1     (0x03 << 6)
-#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
-#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
-
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
-#define S3C2410_GPG4_EINT12   (0x02 << 8)
-#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
-#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
-#define S3C2410_GPG5_EINT13   (0x02 << 10)
-#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
-#define S3C2400_GPG5_IICSDA   (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
-
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
-#define S3C2410_GPG6_EINT14   (0x02 << 12)
-#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
-#define S3C2400_GPG6_IICSCL   (0x03 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
-#define S3C2410_GPG7_EINT15   (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
-#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
-#define S3C2400_GPG7_IICSDA   (0x03 << 14)
-
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
-#define S3C2410_GPG8_EINT16   (0x02 << 16)
-#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
-#define S3C2400_GPG8_IICSCL   (0x03 << 16)
-
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
-#define S3C2410_GPG9_EINT17   (0x02 << 18)
-#define S3C2400_GPG9_SPICLK   (0x02 << 18)
-#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
-
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
-#define S3C2410_GPG10_EINT18  (0x02 << 20)
-
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
-#define S3C2410_GPG11_EINT19  (0x02 << 22)
-#define S3C2410_GPG11_TCLK1   (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
-#define S3C2410_GPG12_EINT20  (0x02 << 24)
-#define S3C2410_GPG12_XMON    (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
-#define S3C2410_GPG13_EINT21  (0x02 << 26)
-#define S3C2410_GPG13_nXPON   (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
-#define S3C2410_GPG14_EINT22  (0x02 << 28)
-#define S3C2410_GPG14_YMON    (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
-#define S3C2410_GPG15_EINT23  (0x02 << 30)
-#define S3C2410_GPG15_nYPON   (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
-#define S3C2410_GPH0_nCTS0  (0x02 << 0)
-
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
-#define S3C2410_GPH1_nRTS0  (0x02 << 2)
-
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
-#define S3C2410_GPH2_TXD0   (0x02 << 4)
-
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
-#define S3C2410_GPH3_RXD0   (0x02 << 6)
-
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
-#define S3C2410_GPH4_TXD1   (0x02 << 8)
-
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
-#define S3C2410_GPH5_RXD1   (0x02 << 10)
-
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
-#define S3C2410_GPH6_TXD2   (0x02 << 12)
-#define S3C2410_GPH6_nRTS1  (0x03 << 12)
-
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
-#define S3C2410_GPH7_RXD2   (0x02 << 14)
-#define S3C2410_GPH7_nCTS1  (0x03 << 14)
-
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
-#define S3C2410_GPH8_UCLK   (0x02 << 16)
-
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
-#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
-
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/* miscellaneous control */
-#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
-#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
-
-#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
-#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
-#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
-#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
-
-#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
-#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
-
-#define S3C2410_MISCCR_USBDEV	    (0<<3)
-#define S3C2410_MISCCR_USBHOST	    (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
-#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
-
-/* values for S3C2410_EXTINT0/1/2 */
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
-
-/* interrupt filtering conrrol for EINT16..EINT23 */
-#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK		(0x00)
-#define S3C2410_EINTFLT_EXTCLK		(1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
-#define S3C2410_GSTATUS0_NCON	   (1<<2)
-#define S3C2410_GSTATUS0_RnB	   (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
-#define S3C2410_GSTATUS1_2410	   (0x32410000)
-#define S3C2410_GSTATUS1_2412	   (0x32412001)
-#define S3C2410_GSTATUS1_2440	   (0x32440000)
-#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
-
-#define S3C2410_GSTATUS2_WTRESET   (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
-#define S3C2410_GSTATUS2_PONRESET  (1<<0)
-
-/* open drain control register */
-#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
-
-#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
-#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
-#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
-#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
-#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
-#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
-#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
-#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
-#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
-#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
-#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
-#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW	(0x0)
-#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
-
-#endif	/* __ASM_ARCH_REGS_GPIO_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
deleted file mode 100644
index 0362332faaf0..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 GPIO J register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIOJ_H
-#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
-
-/* Port J consists of 13 GPIO/Camera pins
- *
- * GPJCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 Camera
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2440_GPIO_BANKJ  (416)
-
-#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
-#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
-#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
-
-#define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
-
-#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
-#define S3C2440_GPJ0_INP        (0x00 << 0)
-#define S3C2440_GPJ0_OUTP       (0x01 << 0)
-#define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
-
-#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
-#define S3C2440_GPJ1_INP        (0x00 << 2)
-#define S3C2440_GPJ1_OUTP       (0x01 << 2)
-#define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
-
-#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
-#define S3C2440_GPJ2_INP        (0x00 << 4)
-#define S3C2440_GPJ2_OUTP       (0x01 << 4)
-#define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
-
-#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
-#define S3C2440_GPJ3_INP        (0x00 << 6)
-#define S3C2440_GPJ3_OUTP       (0x01 << 6)
-#define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
-
-#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
-#define S3C2440_GPJ4_INP        (0x00 << 8)
-#define S3C2440_GPJ4_OUTP       (0x01 << 8)
-#define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
-
-#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
-#define S3C2440_GPJ5_INP        (0x00 << 10)
-#define S3C2440_GPJ5_OUTP       (0x01 << 10)
-#define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
-
-#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
-#define S3C2440_GPJ6_INP        (0x00 << 12)
-#define S3C2440_GPJ6_OUTP       (0x01 << 12)
-#define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
-
-#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
-#define S3C2440_GPJ7_INP        (0x00 << 14)
-#define S3C2440_GPJ7_OUTP       (0x01 << 14)
-#define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
-
-#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
-#define S3C2440_GPJ8_INP        (0x00 << 16)
-#define S3C2440_GPJ8_OUTP       (0x01 << 16)
-#define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
-
-#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
-#define S3C2440_GPJ9_INP        (0x00 << 18)
-#define S3C2440_GPJ9_OUTP       (0x01 << 18)
-#define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
-
-#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
-#define S3C2440_GPJ10_INP       (0x00 << 20)
-#define S3C2440_GPJ10_OUTP      (0x01 << 20)
-#define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
-
-#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
-#define S3C2440_GPJ11_INP       (0x00 << 22)
-#define S3C2440_GPJ11_OUTP      (0x01 << 22)
-#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
-
-#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
-#define S3C2440_GPJ12_INP       (0x00 << 24)
-#define S3C2440_GPJ12_OUTP      (0x01 << 24)
-#define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
-
-#define S3C2443_GPJ13		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
-#define S3C2443_GPJ14		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
-#define S3C2443_GPJ15		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
-
-#endif	/* __ASM_ARCH_REGS_GPIOJ_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
deleted file mode 100644
index 498184cb8adc..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-irq.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-irq.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
deleted file mode 100644
index bd854845697f..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-lcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
-
-#define S3C2410_LCDREG(x)	(x)
-
-/* LCD control registers */
-#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
-#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
-#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
-#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
-#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
-
-#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
-#define S3C2410_LCDCON1_MMODE	   (1<<7)
-#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
-#define S3C2410_LCDCON1_STN4	   (1<<5)
-#define S3C2410_LCDCON1_STN8	   (2<<5)
-#define S3C2410_LCDCON1_TFT	   (3<<5)
-
-#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
-#define S3C2410_LCDCON1_STN2GREY   (1<<1)
-#define S3C2410_LCDCON1_STN4GREY   (2<<1)
-#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
-#define S3C2410_LCDCON1_STN12BPP   (4<<1)
-
-#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
-
-#define S3C2410_LCDCON1_ENVID	   (1)
-
-#define S3C2410_LCDCON1_MODEMASK    0x1E
-
-#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
-#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
-#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
-#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
-#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
-#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
-
-#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
-#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
-#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
-
-#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
-#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
-
-/* LDCCON4 changes for STN mode on the S3C2412 */
-
-#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
-#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
-#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
-
-#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
-#define S3C2410_LCDCON5_FRM565	    (1<<11)
-#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
-#define S3C2410_LCDCON5_INVVLINE    (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
-#define S3C2410_LCDCON5_INVVD	    (1<<7)
-#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
-#define S3C2410_LCDCON5_INVPWREN    (1<<5)
-#define S3C2410_LCDCON5_INVLEND	    (1<<4)
-#define S3C2410_LCDCON5_PWREN	    (1<<3)
-#define S3C2410_LCDCON5_ENLEND	    (1<<2)
-#define S3C2410_LCDCON5_BSWP	    (1<<1)
-#define S3C2410_LCDCON5_HWSWP	    (1<<0)
-
-/* framebuffer start addressed */
-#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
-#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
-#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
-
-#define S3C2410_LCDBANK(x)	((x) << 21)
-#define S3C2410_LCDBASEU(x)	(x)
-
-#define S3C2410_OFFSIZE(x)	((x) << 11)
-#define S3C2410_PAGEWIDTH(x)	(x)
-
-/* colour lookup and miscellaneous controls */
-
-#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
-#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
-#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
-
-#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
-#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
-
-#define S3C2410_TPAL_EN		(1<<24)
-
-/* interrupt info */
-#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
-#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
-#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
-#define S3C2410_LCDINT_FIWSEL	(1<<2)
-#define	S3C2410_LCDINT_FRSYNC	(1<<1)
-#define S3C2410_LCDINT_FICNT	(1<<0)
-
-/* s3c2442 extra stn registers */
-
-#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
-#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
-#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
-#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
-
-#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
-
-#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
-
-/* S3C2412 registers */
-
-#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
-
-#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
-#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
-#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
-
-#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
-
-#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
-#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
-#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
-#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
-
-#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
-#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
-#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
-
-#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
-
-/* general registers */
-
-/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
- * are available. */
-
-#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
-#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
-
-#define S3C24XX_LCDINTPND	(0x00)
-#define S3C24XX_LCDSRCPND	(0x04)
-#define S3C24XX_LCDINTMSK	(0x08)
-
-#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
deleted file mode 100644
index 312ff93b63c6..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16		(1<<1)
-#define S3C2410_BWSCON_DW0_32		(2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8		(0<<4)
-#define S3C2410_BWSCON_DW1_16		(1<<4)
-#define S3C2410_BWSCON_DW1_32		(2<<4)
-#define S3C2410_BWSCON_WS1		(1<<6)
-#define S3C2410_BWSCON_ST1		(1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8		(0<<8)
-#define S3C2410_BWSCON_DW2_16		(1<<8)
-#define S3C2410_BWSCON_DW2_32		(2<<8)
-#define S3C2410_BWSCON_WS2		(1<<10)
-#define S3C2410_BWSCON_ST2		(1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8		(0<<12)
-#define S3C2410_BWSCON_DW3_16		(1<<12)
-#define S3C2410_BWSCON_DW3_32		(2<<12)
-#define S3C2410_BWSCON_WS3		(1<<14)
-#define S3C2410_BWSCON_ST3		(1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8		(0<<16)
-#define S3C2410_BWSCON_DW4_16		(1<<16)
-#define S3C2410_BWSCON_DW4_32		(2<<16)
-#define S3C2410_BWSCON_WS4		(1<<18)
-#define S3C2410_BWSCON_ST4		(1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8		(0<<20)
-#define S3C2410_BWSCON_DW5_16		(1<<20)
-#define S3C2410_BWSCON_DW5_32		(2<<20)
-#define S3C2410_BWSCON_WS5		(1<<22)
-#define S3C2410_BWSCON_ST5		(1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8		(0<<24)
-#define S3C2410_BWSCON_DW6_16		(1<<24)
-#define S3C2410_BWSCON_DW6_32		(2<<24)
-#define S3C2410_BWSCON_WS6		(1<<26)
-#define S3C2410_BWSCON_ST6		(1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8		(0<<28)
-#define S3C2410_BWSCON_DW7_16		(1<<28)
-#define S3C2410_BWSCON_DW7_32		(2<<28)
-#define S3C2410_BWSCON_WS7		(1<<30)
-#define S3C2410_BWSCON_ST7		(1<<31)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm		(0x00)
-#define S3C2410_BANKCON_PMC4		(0x01)
-#define S3C2410_BANKCON_PMC8		(0x02)
-#define S3C2410_BANKCON_PMC16		(0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have differnt configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
-#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
-#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
-#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-
-#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
-#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
-#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
-#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-
-#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-
-#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
-#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
-#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
-#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
-#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
-#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
-#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
-#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-
-#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
-#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
-#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
-#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-
-#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
-#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
-#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
-#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SRAM		(0x0 << 15)
-#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-/* next bits only for EDO DRAM in 6,7 */
-#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
-#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
-#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
-#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
-
-/* CAS pulse width */
-#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
-#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
-
-/* CAS pre-charge */
-#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
-#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
-
-/* control column address select */
-#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
-#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
-#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
-#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
-#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
-#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
-#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
-#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
-
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN		(1<<23)
-#define S3C2410_REFRESH_SELF		(1<<22)
-#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK	(3<<20)
-#define S3C2410_REFRESH_TRP_2clk	(0<<20)
-#define S3C2410_REFRESH_TRP_3clk	(1<<20)
-#define S3C2410_REFRESH_TRP_4clk	(2<<20)
-
-#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
-#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
-#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
-#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
-#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
-#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
-#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
-#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
-#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
-
-
-/* mode select register(s) */
-
-#define  S3C2410_MRSRB_CL1		(0x00 << 4)
-#define  S3C2410_MRSRB_CL2		(0x02 << 4)
-#define  S3C2410_MRSRB_CL3		(0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M		(0x2 << 0)
-#define S3C2410_BANKSIZE_64M		(0x1 << 0)
-#define S3C2410_BANKSIZE_32M		(0x0 << 0)
-#define S3C2410_BANKSIZE_16M		(0x7 << 0)
-#define S3C2410_BANKSIZE_8M		(0x6 << 0)
-#define S3C2410_BANKSIZE_4M		(0x5 << 0)
-#define S3C2410_BANKSIZE_2M		(0x4 << 0)
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
-#define S3C2410_BANKSIZE_BURST		(1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h
deleted file mode 100644
index 13d13b7cfe98..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-power.h
- *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
-#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
-#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
deleted file mode 100644
index c8c793e78936..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#ifndef S3C2412_MEMREG
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
-
-#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h
deleted file mode 100644
index 783b18f5bcea..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET	(0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
deleted file mode 100644
index c1414658d1c5..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2443 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
-#define __ASM_ARM_REGS_S3C2443_CLOCK
-
-#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2443_PLLCON_MDIVSHIFT	16
-#define S3C2443_PLLCON_PDIVSHIFT	8
-#define S3C2443_PLLCON_SDIVSHIFT	0
-#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
-#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
-#define S3C2443_PLLCON_SDIVMASK		(3)
-
-#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
-#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
-#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
-#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
-#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
-#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
-#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
-#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
-#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
-#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
-#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
-#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
-#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
-#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
-
-#define S3C2443_SWRST_RESET		(0x533c2443)
-
-#define S3C2443_PLLCON_OFF		(1<<24)
-
-#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
-#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
-#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
-
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
-
-#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
-#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
-#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
-
-#define S3C2443_CLKDIV0_DVS		(1<<13)
-#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
-#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
-
-#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
-
-#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
-
-#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
-#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
-#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
-#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
-#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
-#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
-#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
-#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
-#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
-#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
-
-/* S3C2443_CLKDIV1 */
-
-#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
-#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
-
-#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
-#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
-
-#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
-#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
-
-#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
-#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
-
-#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
-#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
-
-#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
-
-#define S3C2443_CLKCON_NAND
-
-#define S3C2443_HCLKCON_DMA0		(1<<0)
-#define S3C2443_HCLKCON_DMA1		(1<<1)
-#define S3C2443_HCLKCON_DMA2		(1<<2)
-#define S3C2443_HCLKCON_DMA3		(1<<3)
-#define S3C2443_HCLKCON_DMA4		(1<<4)
-#define S3C2443_HCLKCON_DMA5		(1<<5)
-#define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_DISP		(1<<9)
-#define S3C2443_HCLKCON_LCDC		(1<<10)
-#define S3C2443_HCLKCON_USBH		(1<<11)
-#define S3C2443_HCLKCON_USBD		(1<<12)
-#define S3C2443_HCLKCON_HSMMC		(1<<16)
-#define S3C2443_HCLKCON_CFC		(1<<17)
-#define S3C2443_HCLKCON_SSMC		(1<<18)
-#define S3C2443_HCLKCON_DRAMC		(1<<19)
-
-#define S3C2443_PCLKCON_UART0		(1<<0)
-#define S3C2443_PCLKCON_UART1		(1<<1)
-#define S3C2443_PCLKCON_UART2		(1<<2)
-#define S3C2443_PCLKCON_UART3		(1<<3)
-#define S3C2443_PCLKCON_IIC		(1<<4)
-#define S3C2443_PCLKCON_SDI		(1<<5)
-#define S3C2443_PCLKCON_ADC		(1<<7)
-#define S3C2443_PCLKCON_AC97		(1<<8)
-#define S3C2443_PCLKCON_IIS		(1<<9)
-#define S3C2443_PCLKCON_PWMT		(1<<10)
-#define S3C2443_PCLKCON_WDT		(1<<11)
-#define S3C2443_PCLKCON_RTC		(1<<12)
-#define S3C2443_PCLKCON_GPIO		(1<<13)
-#define S3C2443_PCLKCON_SPI0		(1<<14)
-#define S3C2443_PCLKCON_SPI1		(1<<15)
-
-#define S3C2443_SCLKCON_DDRCLK		(1<<16)
-#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
-#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
-#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
-#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
-#define S3C2443_SCLKCON_CAMCLK		(1<<11)
-#define S3C2443_SCLKCON_DISPCLK		(1<<10)
-#define S3C2443_SCLKCON_I2SCLK		(1<<9)
-#define S3C2443_SCLKCON_UARTCLK		(1<<8)
-#define S3C2443_SCLKCON_USBHOST		(1<<1)
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
-	do_div(fvco, pdiv << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static inline unsigned int
-s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
-
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
deleted file mode 100644
index bfb222fa4abb..000000000000
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON                (0x00)
-#define S3C2410_SDIPRE                (0x04)
-#define S3C2410_SDICMDARG             (0x08)
-#define S3C2410_SDICMDCON             (0x0C)
-#define S3C2410_SDICMDSTAT            (0x10)
-#define S3C2410_SDIRSP0               (0x14)
-#define S3C2410_SDIRSP1               (0x18)
-#define S3C2410_SDIRSP2               (0x1C)
-#define S3C2410_SDIRSP3               (0x20)
-#define S3C2410_SDITIMER              (0x24)
-#define S3C2410_SDIBSIZE              (0x28)
-#define S3C2410_SDIDCON               (0x2C)
-#define S3C2410_SDIDCNT               (0x30)
-#define S3C2410_SDIDSTA               (0x34)
-#define S3C2410_SDIFSTA               (0x38)
-
-#define S3C2410_SDIDATA               (0x3C)
-#define S3C2410_SDIIMSK               (0x40)
-
-#define S3C2440_SDIDATA               (0x40)
-#define S3C2440_SDIIMSK               (0x3C)
-
-#define S3C2440_SDICON_SDRESET        (1<<8)
-#define S3C2440_SDICON_MMCCLOCK       (1<<5)
-#define S3C2410_SDICON_BYTEORDER      (1<<4)
-#define S3C2410_SDICON_SDIOIRQ        (1<<3)
-#define S3C2410_SDICON_RWAITEN        (1<<2)
-#define S3C2410_SDICON_FIFORESET      (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT       (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
-#define S3C2410_SDICMDCON_INDEX       (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX      (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
-#define S3C2440_SDIDCON_DS_WORD       (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
-#define S3C2410_SDIDCON_DMAEN         (1<<15)
-#define S3C2410_SDIDCON_STOP          (1<<14)
-#define S3C2440_SDIDCON_DATSTART      (1<<14)
-#define S3C2410_SDIDCON_DATMODE	      (3<<12)
-#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY    (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
-#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET          (1<<13)
-#define S3C2410_SDIFSTA_RFDET          (1<<12)
-#define S3C2410_SDIFSTA_TFHALF         (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
-#define S3C2410_SDIFSTA_RFLAST         (1<<9)
-#define S3C2410_SDIFSTA_RFFULL         (1<<8)
-#define S3C2410_SDIFSTA_RFHALF         (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
-#define S3C2410_SDIIMSK_READWAIT       (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
-#define S3C2410_SDIIMSK_DATACRC        (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
-#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
deleted file mode 100644
index 4f866cdecab0..000000000000
--- a/include/asm-arm/arch-s3c2410/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/reset.h
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU reset controls
-*/
-
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H __FILE__
-
-/* This allows the over-ride of the default reset code
-*/
-
-extern void (*s3c24xx_reset_hook)(void);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
deleted file mode 100644
index 73803731142a..000000000000
--- a/include/asm-arm/arch-s3c2410/spi-gpio.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPIGPIO_H
-#define __ASM_ARCH_SPIGPIO_H __FILE__
-
-struct s3c2410_spigpio_info {
-	unsigned long		 pin_clk;
-	unsigned long		 pin_mosi;
-	unsigned long		 pin_miso;
-
-	int			 bus_num;
-
-	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
-};
-
-
-#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
deleted file mode 100644
index 352d33860b63..000000000000
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/spi.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H __FILE__
-
-struct s3c2410_spi_info {
-	unsigned long		 pin_cs;	/* simple gpio cs */
-	unsigned int		 num_cs;	/* total chipselects */
-
-	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
-};
-
-
-#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h
deleted file mode 100644
index 1615bce0c026..000000000000
--- a/include/asm-arm/arch-s3c2410/system-reset.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/system-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/plat-s3c/regs-watchdog.h>
-#include <asm/arch/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-
-extern void (*s3c24xx_reset_hook)(void);
-
-static void
-arch_reset(char mode)
-{
-	struct clk *wdtclk;
-
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-
-	if (s3c24xx_reset_hook)
-		s3c24xx_reset_hook();
-
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-
-	/* we'll take a jump through zero as a poor second */
-	cpu_reset(0);
-}
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
deleted file mode 100644
index ad258085e53b..000000000000
--- a/include/asm-arm/arch-s3c2410/system.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/idle.h>
-#include <asm/arch/reset.h>
-
-#include <asm/arch/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-void (*s3c24xx_reset_hook)(void);
-
-void s3c24xx_default_idle(void)
-{
-	unsigned long tmp;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++) {
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-	}
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
-	if (s3c24xx_idle != NULL)
-		(s3c24xx_idle)();
-	else
-		s3c24xx_default_idle();
-}
-
-#include <asm/arch/system-reset.h>
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
deleted file mode 100644
index c16a99c5a59a..000000000000
--- a/include/asm-arm/arch-s3c2410/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-
-#define CLOCK_TICK_RATE 12000000
-
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
deleted file mode 100644
index 48a5731ee988..000000000000
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/uncompress.h
- *
- * Copyright (c) 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/map.h>
-
-/* working in physical space... */
-#undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
-
-#include <asm/plat-s3c/uncompress.h>
-
-static inline int is_arm926(void)
-{
-	unsigned int cpuid;
-
-	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
-
-	return ((cpuid & 0xff0) == 0x260);
-}
-
-static void arch_detect_cpu(void)
-{
-	unsigned int cpuid;
-
-	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
-	cpuid &= S3C2410_GSTATUS1_IDMASK;
-
-	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442) {
-		fifo_mask = S3C2440_UFSTAT_TXMASK;
-		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-	} else {
-		fifo_mask = S3C2410_UFSTAT_TXMASK;
-		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
-	}
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
deleted file mode 100644
index 5bfa376e33dc..000000000000
--- a/include/asm-arm/arch-s3c2410/usb-control.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - usb port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h
deleted file mode 100644
index 0ae3bdb7e03b..000000000000
--- a/include/asm-arm/arch-s3c2410/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
- *
- * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (0xE0000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
deleted file mode 100644
index 0557b0a5ab1d..000000000000
--- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h
deleted file mode 100644
index 890937083c61..000000000000
--- a/include/asm-arm/arch-s3c2410/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
- *
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC	     IRQ_EINT19
-#define IRQ_IDE0	     IRQ_EINT16
-#define IRQ_IDE1	     IRQ_EINT17
-#define IRQ_VR1000_SERIAL    IRQ_EINT12
-#define IRQ_VR1000_DM9000A   IRQ_EINT10
-#define IRQ_VR1000_DM9000N   IRQ_EINT9
-#define IRQ_SMALERT	     IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h
deleted file mode 100644
index 92a56a724a8c..000000000000
--- a/include/asm-arm/arch-s3c2410/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <asm/arch/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
-#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
-#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
-#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
-#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI	   (0x02000000)
-#define VR1000_PA_IDEPRIAUX	   (0x02800000)
-#define VR1000_PA_IDESEC	   (0x03000000)
-#define VR1000_PA_IDESECAUX	   (0x03800000)
-#define VR1000_PA_DM9000	   (0x05000000)
-
-#define VR1000_PA_SERIAL	   (0x11800000)
-#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS	 VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/include/asm-arm/arch-sa1100/SA-1100.h
deleted file mode 100644
index 62aaf04a3906..000000000000
--- a/include/asm-arm/arch-sa1100/SA-1100.h
+++ /dev/null
@@ -1,2072 +0,0 @@
-/*
- *	FILE    	SA-1100.h
- *
- *	Version 	1.2
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	January 1998 (April 1997)
- *	System  	StrongARM SA-1100
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of constants related to the StrongARM
- *	        	SA-1100 microprocessor (Advanced RISC Machine (ARM)
- *	        	architecture version 4). This file is based on the
- *	        	StrongARM SA-1100 data sheet version 2.2.
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1100.h
-#endif
-
-#include "bitfield.h"
-
-/*
- * SA1100 CS line to physical address
- */
-
-#define SA1100_CS0_PHYS	0x00000000
-#define SA1100_CS1_PHYS	0x08000000
-#define SA1100_CS2_PHYS	0x10000000
-#define SA1100_CS3_PHYS	0x18000000
-#define SA1100_CS4_PHYS	0x40000000
-#define SA1100_CS5_PHYS	0x48000000
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
-#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
-#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
-#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
-#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
-
-#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
-#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
-#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
-
-#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
-#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
-#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
-
-#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	(0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
-#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
-                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
-                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
-#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
-#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
-#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
-
-#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
-#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
-#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
-#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
-
-
-/*
- * Universal Serial Bus (USB) Device Controller (UDC) control registers
- *
- * Registers
- *    Ser0UDCCR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control Register (read/write).
- *    Ser0UDCAR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Address Register (read/write).
- *    Ser0UDCOMP	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Output Maximum Packet size register
- *              	(read/write).
- *    Ser0UDCIMP	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Input Maximum Packet size register
- *              	(read/write).
- *    Ser0UDCCS0	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control/Status register end-point 0
- *              	(read/write).
- *    Ser0UDCCS1	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control/Status register end-point 1
- *              	(output, read/write).
- *    Ser0UDCCS2	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control/Status register end-point 2
- *              	(input, read/write).
- *    Ser0UDCD0 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Data register end-point 0
- *              	(read/write).
- *    Ser0UDCWC 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Write Count register end-point 0
- *              	(read).
- *    Ser0UDCDR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Data Register (read/write).
- *    Ser0UDCSR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Status Register (read/write).
- */
-
-#define Ser0UDCCR	__REG(0x80000000)  /* Ser. port 0 UDC Control Reg. */
-#define Ser0UDCAR	__REG(0x80000004)  /* Ser. port 0 UDC Address Reg. */
-#define Ser0UDCOMP	__REG(0x80000008)  /* Ser. port 0 UDC Output Maximum Packet size reg. */
-#define Ser0UDCIMP	__REG(0x8000000C)  /* Ser. port 0 UDC Input Maximum Packet size reg. */
-#define Ser0UDCCS0	__REG(0x80000010)  /* Ser. port 0 UDC Control/Status reg. end-point 0 */
-#define Ser0UDCCS1	__REG(0x80000014)  /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
-#define Ser0UDCCS2	__REG(0x80000018)  /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
-#define Ser0UDCD0	__REG(0x8000001C)  /* Ser. port 0 UDC Data reg. end-point 0 */
-#define Ser0UDCWC	__REG(0x80000020)  /* Ser. port 0 UDC Write Count reg. end-point 0 */
-#define Ser0UDCDR	__REG(0x80000028)  /* Ser. port 0 UDC Data Reg. */
-#define Ser0UDCSR	__REG(0x80000030)  /* Ser. port 0 UDC Status Reg. */
-
-#define UDCCR_UDD	0x00000001	/* UDC Disable                     */
-#define UDCCR_UDA	0x00000002	/* UDC Active (read)               */
-#define UDCCR_RESIM	0x00000004	/* Resume Interrupt Mask, per errata */
-#define UDCCR_EIM	0x00000008	/* End-point 0 Interrupt Mask      */
-                	        	/* (disable)                       */
-#define UDCCR_RIM	0x00000010	/* Receive Interrupt Mask          */
-                	        	/* (disable)                       */
-#define UDCCR_TIM	0x00000020	/* Transmit Interrupt Mask         */
-                	        	/* (disable)                       */
-#define UDCCR_SRM	0x00000040	/* Suspend/Resume interrupt Mask   */
-                	        	/* (disable)                       */
-#define UDCCR_SUSIM	UDCCR_SRM	/* Per errata, SRM just masks suspend */
-#define UDCCR_REM	0x00000080	/* REset interrupt Mask (disable)  */
-
-#define UDCAR_ADD	Fld (7, 0)	/* function ADDress                */
-
-#define UDCOMP_OUTMAXP	Fld (8, 0)	/* OUTput MAXimum Packet size - 1  */
-                	        	/* [byte]                          */
-#define UDCOMP_OutMaxPkt(Size)  	/* Output Maximum Packet size      */ \
-                	        	/* [1..256 byte]                   */ \
-                	(((Size) - 1) << FShft (UDCOMP_OUTMAXP))
-
-#define UDCIMP_INMAXP	Fld (8, 0)	/* INput MAXimum Packet size - 1   */
-                	        	/* [byte]                          */
-#define UDCIMP_InMaxPkt(Size)   	/* Input Maximum Packet size       */ \
-                	        	/* [1..256 byte]                   */ \
-                	(((Size) - 1) << FShft (UDCIMP_INMAXP))
-
-#define UDCCS0_OPR	0x00000001	/* Output Packet Ready (read)      */
-#define UDCCS0_IPR	0x00000002	/* Input Packet Ready              */
-#define UDCCS0_SST	0x00000004	/* Sent STall                      */
-#define UDCCS0_FST	0x00000008	/* Force STall                     */
-#define UDCCS0_DE	0x00000010	/* Data End                        */
-#define UDCCS0_SE	0x00000020	/* Setup End (read)                */
-#define UDCCS0_SO	0x00000040	/* Serviced Output packet ready    */
-                	        	/* (write)                         */
-#define UDCCS0_SSE	0x00000080	/* Serviced Setup End (write)      */
-
-#define UDCCS1_RFS	0x00000001	/* Receive FIFO 12-bytes or more   */
-                	        	/* Service request (read)          */
-#define UDCCS1_RPC	0x00000002	/* Receive Packet Complete         */
-#define UDCCS1_RPE	0x00000004	/* Receive Packet Error (read)     */
-#define UDCCS1_SST	0x00000008	/* Sent STall                      */
-#define UDCCS1_FST	0x00000010	/* Force STall                     */
-#define UDCCS1_RNE	0x00000020	/* Receive FIFO Not Empty (read)   */
-
-#define UDCCS2_TFS	0x00000001	/* Transmit FIFO 8-bytes or less   */
-                	        	/* Service request (read)          */
-#define UDCCS2_TPC	0x00000002	/* Transmit Packet Complete        */
-#define UDCCS2_TPE	0x00000004	/* Transmit Packet Error (read)    */
-#define UDCCS2_TUR	0x00000008	/* Transmit FIFO Under-Run         */
-#define UDCCS2_SST	0x00000010	/* Sent STall                      */
-#define UDCCS2_FST	0x00000020	/* Force STall                     */
-
-#define UDCD0_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-
-#define UDCWC_WC	Fld (4, 0)	/* Write Count                     */
-
-#define UDCDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-
-#define UDCSR_EIR	0x00000001	/* End-point 0 Interrupt Request   */
-#define UDCSR_RIR	0x00000002	/* Receive Interrupt Request       */
-#define UDCSR_TIR	0x00000004	/* Transmit Interrupt Request      */
-#define UDCSR_SUSIR	0x00000008	/* SUSpend Interrupt Request       */
-#define UDCSR_RESIR	0x00000010	/* RESume Interrupt Request        */
-#define UDCSR_RSTIR	0x00000020	/* ReSeT Interrupt Request         */
-
-
-/*
- * Universal Asynchronous Receiver/Transmitter (UART) control registers
- *
- * Registers
- *    Ser1UTCR0 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 0
- *              	(read/write).
- *    Ser1UTCR1 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 1
- *              	(read/write).
- *    Ser1UTCR2 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 2
- *              	(read/write).
- *    Ser1UTCR3 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 3
- *              	(read/write).
- *    Ser1UTDR  	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Data Register
- *              	(read/write).
- *    Ser1UTSR0 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 0
- *              	(read/write).
- *    Ser1UTSR1 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 1 (read).
- *
- *    Ser2UTCR0 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 0
- *              	(read/write).
- *    Ser2UTCR1 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 1
- *              	(read/write).
- *    Ser2UTCR2 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 2
- *              	(read/write).
- *    Ser2UTCR3 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 3
- *              	(read/write).
- *    Ser2UTCR4 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 4
- *              	(read/write).
- *    Ser2UTDR  	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Data Register
- *              	(read/write).
- *    Ser2UTSR0 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 0
- *              	(read/write).
- *    Ser2UTSR1 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 1 (read).
- *
- *    Ser3UTCR0 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 0
- *              	(read/write).
- *    Ser3UTCR1 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 1
- *              	(read/write).
- *    Ser3UTCR2 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 2
- *              	(read/write).
- *    Ser3UTCR3 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 3
- *              	(read/write).
- *    Ser3UTDR  	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Data Register
- *              	(read/write).
- *    Ser3UTSR0 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 0
- *              	(read/write).
- *    Ser3UTSR1 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 1 (read).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fua, Tua  	Frequency, period of the UART communication.
- */
-
-#define _UTCR0(Nb)	__REG(0x80010000 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 0 [1..3] */
-#define _UTCR1(Nb)	__REG(0x80010004 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 1 [1..3] */
-#define _UTCR2(Nb)	__REG(0x80010008 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 2 [1..3] */
-#define _UTCR3(Nb)	__REG(0x8001000C + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 3 [1..3] */
-#define _UTCR4(Nb)	__REG(0x80010010 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 4 [2] */
-#define _UTDR(Nb)	__REG(0x80010014 + ((Nb) - 1)*0x00020000)  /* UART Data Reg. [1..3] */
-#define _UTSR0(Nb)	__REG(0x8001001C + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 0 [1..3] */
-#define _UTSR1(Nb)	__REG(0x80010020 + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 1 [1..3] */
-
-#define Ser1UTCR0	_UTCR0 (1)	/* Ser. port 1 UART Control Reg. 0 */
-#define Ser1UTCR1	_UTCR1 (1)	/* Ser. port 1 UART Control Reg. 1 */
-#define Ser1UTCR2	_UTCR2 (1)	/* Ser. port 1 UART Control Reg. 2 */
-#define Ser1UTCR3	_UTCR3 (1)	/* Ser. port 1 UART Control Reg. 3 */
-#define Ser1UTDR	_UTDR (1)	/* Ser. port 1 UART Data Reg.      */
-#define Ser1UTSR0	_UTSR0 (1)	/* Ser. port 1 UART Status Reg. 0  */
-#define Ser1UTSR1	_UTSR1 (1)	/* Ser. port 1 UART Status Reg. 1  */
-
-#define Ser2UTCR0	_UTCR0 (2)	/* Ser. port 2 UART Control Reg. 0 */
-#define Ser2UTCR1	_UTCR1 (2)	/* Ser. port 2 UART Control Reg. 1 */
-#define Ser2UTCR2	_UTCR2 (2)	/* Ser. port 2 UART Control Reg. 2 */
-#define Ser2UTCR3	_UTCR3 (2)	/* Ser. port 2 UART Control Reg. 3 */
-#define Ser2UTCR4	_UTCR4 (2)	/* Ser. port 2 UART Control Reg. 4 */
-#define Ser2UTDR	_UTDR (2)	/* Ser. port 2 UART Data Reg.      */
-#define Ser2UTSR0	_UTSR0 (2)	/* Ser. port 2 UART Status Reg. 0  */
-#define Ser2UTSR1	_UTSR1 (2)	/* Ser. port 2 UART Status Reg. 1  */
-
-#define Ser3UTCR0	_UTCR0 (3)	/* Ser. port 3 UART Control Reg. 0 */
-#define Ser3UTCR1	_UTCR1 (3)	/* Ser. port 3 UART Control Reg. 1 */
-#define Ser3UTCR2	_UTCR2 (3)	/* Ser. port 3 UART Control Reg. 2 */
-#define Ser3UTCR3	_UTCR3 (3)	/* Ser. port 3 UART Control Reg. 3 */
-#define Ser3UTDR	_UTDR (3)	/* Ser. port 3 UART Data Reg.      */
-#define Ser3UTSR0	_UTSR0 (3)	/* Ser. port 3 UART Status Reg. 0  */
-#define Ser3UTSR1	_UTSR1 (3)	/* Ser. port 3 UART Status Reg. 1  */
-
-/* Those are still used in some places */
-#define _Ser1UTCR0	__PREG(Ser1UTCR0)
-#define _Ser2UTCR0	__PREG(Ser2UTCR0)
-#define _Ser3UTCR0	__PREG(Ser3UTCR0)
-
-/* Register offsets */
-#define UTCR0		0x00
-#define UTCR1		0x04
-#define UTCR2		0x08
-#define UTCR3		0x0c
-#define UTDR		0x14
-#define UTSR0		0x1c
-#define UTSR1		0x20
-
-#define UTCR0_PE	0x00000001	/* Parity Enable                   */
-#define UTCR0_OES	0x00000002	/* Odd/Even parity Select          */
-#define UTCR0_OddPar	(UTCR0_OES*0)	/*  Odd Parity                     */
-#define UTCR0_EvenPar	(UTCR0_OES*1)	/*  Even Parity                    */
-#define UTCR0_SBS	0x00000004	/* Stop Bit Select                 */
-#define UTCR0_1StpBit	(UTCR0_SBS*0)	/*  1 Stop Bit per frame           */
-#define UTCR0_2StpBit	(UTCR0_SBS*1)	/*  2 Stop Bits per frame          */
-#define UTCR0_DSS	0x00000008	/* Data Size Select                */
-#define UTCR0_7BitData	(UTCR0_DSS*0)	/*  7-Bit Data                     */
-#define UTCR0_8BitData	(UTCR0_DSS*1)	/*  8-Bit Data                     */
-#define UTCR0_SCE	0x00000010	/* Sample Clock Enable             */
-                	        	/* (ser. port 1: GPIO [18],        */
-                	        	/* ser. port 3: GPIO [20])         */
-#define UTCR0_RCE	0x00000020	/* Receive Clock Edge select       */
-#define UTCR0_RcRsEdg	(UTCR0_RCE*0)	/*  Receive clock Rising-Edge      */
-#define UTCR0_RcFlEdg	(UTCR0_RCE*1)	/*  Receive clock Falling-Edge     */
-#define UTCR0_TCE	0x00000040	/* Transmit Clock Edge select      */
-#define UTCR0_TrRsEdg	(UTCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
-#define UTCR0_TrFlEdg	(UTCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
-#define UTCR0_Ser2IrDA	        	/* Ser. port 2 IrDA settings       */ \
-                	(UTCR0_1StpBit + UTCR0_8BitData)
-
-#define UTCR1_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
-#define UTCR2_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
-                	        	/* fua = fxtl/(16*(BRD[11:0] + 1)) */
-                	        	/* Tua = 16*(BRD [11:0] + 1)*Txtl  */
-#define UTCR1_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
-                	 FShft (UTCR1_BRD))
-#define UTCR2_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
-                	 FShft (UTCR2_BRD))
-                	        	/*  fua = fxtl/(16*Floor (Div/16)) */
-                	        	/*  Tua = 16*Floor (Div/16)*Txtl   */
-#define UTCR1_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
-                	 FShft (UTCR1_BRD))
-#define UTCR2_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
-                	 FShft (UTCR2_BRD))
-                	        	/*  fua = fxtl/(16*Ceil (Div/16))  */
-                	        	/*  Tua = 16*Ceil (Div/16)*Txtl    */
-
-#define UTCR3_RXE	0x00000001	/* Receive Enable                  */
-#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
-#define UTCR3_BRK	0x00000004	/* BReaK mode                      */
-#define UTCR3_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Interrupt Enable           */
-#define UTCR3_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define UTCR3_LBM	0x00000020	/* Look-Back Mode                  */
-#define UTCR3_Ser2IrDA	        	/* Ser. port 2 IrDA settings (RIE, */ \
-                	        	/* TIE, LBM can be set or cleared) */ \
-                	(UTCR3_RXE + UTCR3_TXE)
-
-#define UTCR4_HSE	0x00000001	/* Hewlett-Packard Serial InfraRed */
-                	        	/* (HP-SIR) modulation Enable      */
-#define UTCR4_NRZ	(UTCR4_HSE*0)	/*  Non-Return to Zero modulation  */
-#define UTCR4_HPSIR	(UTCR4_HSE*1)	/*  HP-SIR modulation              */
-#define UTCR4_LPM	0x00000002	/* Low-Power Mode                  */
-#define UTCR4_Z3_16Bit	(UTCR4_LPM*0)	/*  Zero pulse = 3/16 Bit time     */
-#define UTCR4_Z1_6us	(UTCR4_LPM*1)	/*  Zero pulse = 1.6 us            */
-
-#define UTDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-#if 0           	        	/* Hidden receive FIFO bits        */
-#define UTDR_PRE	0x00000100	/*  receive PaRity Error (read)    */
-#define UTDR_FRE	0x00000200	/*  receive FRaming Error (read)   */
-#define UTDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
-#endif /* 0 */
-
-#define UTSR0_TFS	0x00000001	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define UTSR0_RFS	0x00000002	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Service request (read)     */
-#define UTSR0_RID	0x00000004	/* Receiver IDle                   */
-#define UTSR0_RBB	0x00000008	/* Receive Beginning of Break      */
-#define UTSR0_REB	0x00000010	/* Receive End of Break            */
-#define UTSR0_EIF	0x00000020	/* Error In FIFO (read)            */
-
-#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
-#define UTSR1_RNE	0x00000002	/* Receive FIFO Not Empty (read)   */
-#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
-#define UTSR1_PRE	0x00000008	/* receive PaRity Error (read)     */
-#define UTSR1_FRE	0x00000010	/* receive FRaming Error (read)    */
-#define UTSR1_ROR	0x00000020	/* Receive FIFO Over-Run (read)    */
-
-
-/*
- * Synchronous Data Link Controller (SDLC) control registers
- *
- * Registers
- *    Ser1SDCR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 0 (read/write).
- *    Ser1SDCR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 1 (read/write).
- *    Ser1SDCR2 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 2 (read/write).
- *    Ser1SDCR3 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 3 (read/write).
- *    Ser1SDCR4 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 4 (read/write).
- *    Ser1SDDR  	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Data Register (read/write).
- *    Ser1SDSR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Status Register 0 (read/write).
- *    Ser1SDSR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Status Register 1 (read/write).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fsd, Tsd  	Frequency, period of the SDLC communication.
- */
-
-#define Ser1SDCR0	__REG(0x80020060)  /* Ser. port 1 SDLC Control Reg. 0 */
-#define Ser1SDCR1	__REG(0x80020064)  /* Ser. port 1 SDLC Control Reg. 1 */
-#define Ser1SDCR2	__REG(0x80020068)  /* Ser. port 1 SDLC Control Reg. 2 */
-#define Ser1SDCR3	__REG(0x8002006C)  /* Ser. port 1 SDLC Control Reg. 3 */
-#define Ser1SDCR4	__REG(0x80020070)  /* Ser. port 1 SDLC Control Reg. 4 */
-#define Ser1SDDR	__REG(0x80020078)  /* Ser. port 1 SDLC Data Reg.      */
-#define Ser1SDSR0	__REG(0x80020080)  /* Ser. port 1 SDLC Status Reg. 0  */
-#define Ser1SDSR1	__REG(0x80020084)  /* Ser. port 1 SDLC Status Reg. 1  */
-
-#define SDCR0_SUS	0x00000001	/* SDLC/UART Select                */
-#define SDCR0_SDLC	(SDCR0_SUS*0)	/*  SDLC mode (TXD1 & RXD1)        */
-#define SDCR0_UART	(SDCR0_SUS*1)	/*  UART mode (TXD1 & RXD1)        */
-#define SDCR0_SDF	0x00000002	/* Single/Double start Flag select */
-#define SDCR0_SglFlg	(SDCR0_SDF*0)	/*  Single start Flag              */
-#define SDCR0_DblFlg	(SDCR0_SDF*1)	/*  Double start Flag              */
-#define SDCR0_LBM	0x00000004	/* Look-Back Mode                  */
-#define SDCR0_BMS	0x00000008	/* Bit Modulation Select           */
-#define SDCR0_FM0	(SDCR0_BMS*0)	/*  Freq. Modulation zero (0)      */
-#define SDCR0_NRZ	(SDCR0_BMS*1)	/*  Non-Return to Zero modulation  */
-#define SDCR0_SCE	0x00000010	/* Sample Clock Enable (GPIO [16]) */
-#define SDCR0_SCD	0x00000020	/* Sample Clock Direction select   */
-                	        	/* (GPIO [16])                     */
-#define SDCR0_SClkIn	(SDCR0_SCD*0)	/*  Sample Clock Input             */
-#define SDCR0_SClkOut	(SDCR0_SCD*1)	/*  Sample Clock Output            */
-#define SDCR0_RCE	0x00000040	/* Receive Clock Edge select       */
-#define SDCR0_RcRsEdg	(SDCR0_RCE*0)	/*  Receive clock Rising-Edge      */
-#define SDCR0_RcFlEdg	(SDCR0_RCE*1)	/*  Receive clock Falling-Edge     */
-#define SDCR0_TCE	0x00000080	/* Transmit Clock Edge select      */
-#define SDCR0_TrRsEdg	(SDCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
-#define SDCR0_TrFlEdg	(SDCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
-
-#define SDCR1_AAF	0x00000001	/* Abort After Frame enable        */
-                	        	/* (GPIO [17])                     */
-#define SDCR1_TXE	0x00000002	/* Transmit Enable                 */
-#define SDCR1_RXE	0x00000004	/* Receive Enable                  */
-#define SDCR1_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Interrupt Enable           */
-#define SDCR1_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define SDCR1_AME	0x00000020	/* Address Match Enable            */
-#define SDCR1_TUS	0x00000040	/* Transmit FIFO Under-run Select  */
-#define SDCR1_EFrmURn	(SDCR1_TUS*0)	/*  End Frame on Under-Run         */
-#define SDCR1_AbortURn	(SDCR1_TUS*1)	/*  Abort on Under-Run             */
-#define SDCR1_RAE	0x00000080	/* Receive Abort interrupt Enable  */
-
-#define SDCR2_AMV	Fld (8, 0)	/* Address Match Value             */
-
-#define SDCR3_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
-#define SDCR4_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
-                	        	/* fsd = fxtl/(16*(BRD[11:0] + 1)) */
-                	        	/* Tsd = 16*(BRD[11:0] + 1)*Txtl   */
-#define SDCR3_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
-                	 FShft (SDCR3_BRD))
-#define SDCR4_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
-                	 FShft (SDCR4_BRD))
-                	        	/*  fsd = fxtl/(16*Floor (Div/16)) */
-                	        	/*  Tsd = 16*Floor (Div/16)*Txtl   */
-#define SDCR3_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
-                	 FShft (SDCR3_BRD))
-#define SDCR4_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
-                	 FShft (SDCR4_BRD))
-                	        	/*  fsd = fxtl/(16*Ceil (Div/16))  */
-                	        	/*  Tsd = 16*Ceil (Div/16)*Txtl    */
-
-#define SDDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-#if 0           	        	/* Hidden receive FIFO bits        */
-#define SDDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
-#define SDDR_CRE	0x00000200	/*  receive CRC Error (read)       */
-#define SDDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
-#endif /* 0 */
-
-#define SDSR0_EIF	0x00000001	/* Error In FIFO (read)            */
-#define SDSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
-#define SDSR0_RAB	0x00000004	/* Receive ABort                   */
-#define SDSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define SDSR0_RFS	0x00000010	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Service request (read)     */
-
-#define SDSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
-#define SDSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
-#define SDSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
-#define SDSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
-#define SDSR1_RTD	0x00000010	/* Receive Transition Detected     */
-#define SDSR1_EOF	0x00000020	/* receive End-Of-Frame (read)     */
-#define SDSR1_CRE	0x00000040	/* receive CRC Error (read)        */
-#define SDSR1_ROR	0x00000080	/* Receive FIFO Over-Run (read)    */
-
-
-/*
- * High-Speed Serial to Parallel controller (HSSP) control registers
- *
- * Registers
- *    Ser2HSCR0 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Control Register 0 (read/write).
- *    Ser2HSCR1 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Control Register 1 (read/write).
- *    Ser2HSDR  	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Data Register (read/write).
- *    Ser2HSSR0 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Status Register 0 (read/write).
- *    Ser2HSSR1 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Status Register 1 (read).
- *    Ser2HSCR2 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Control Register 2 (read/write).
- *              	[The HSCR2 register is only implemented in
- *              	versions 2.0 (rev. = 8) and higher of the StrongARM
- *              	SA-1100.]
- */
-
-#define Ser2HSCR0	__REG(0x80040060)  /* Ser. port 2 HSSP Control Reg. 0 */
-#define Ser2HSCR1	__REG(0x80040064)  /* Ser. port 2 HSSP Control Reg. 1 */
-#define Ser2HSDR	__REG(0x8004006C)  /* Ser. port 2 HSSP Data Reg.      */
-#define Ser2HSSR0	__REG(0x80040074)  /* Ser. port 2 HSSP Status Reg. 0  */
-#define Ser2HSSR1	__REG(0x80040078)  /* Ser. port 2 HSSP Status Reg. 1  */
-#define Ser2HSCR2	__REG(0x90060028)  /* Ser. port 2 HSSP Control Reg. 2 */
-
-#define HSCR0_ITR	0x00000001	/* IrDA Transmission Rate          */
-#define HSCR0_UART	(HSCR0_ITR*0)	/*  UART mode (115.2 kb/s if IrDA) */
-#define HSCR0_HSSP	(HSCR0_ITR*1)	/*  HSSP mode (4 Mb/s)             */
-#define HSCR0_LBM	0x00000002	/* Look-Back Mode                  */
-#define HSCR0_TUS	0x00000004	/* Transmit FIFO Under-run Select  */
-#define HSCR0_EFrmURn	(HSCR0_TUS*0)	/*  End Frame on Under-Run         */
-#define HSCR0_AbortURn	(HSCR0_TUS*1)	/*  Abort on Under-Run             */
-#define HSCR0_TXE	0x00000008	/* Transmit Enable                 */
-#define HSCR0_RXE	0x00000010	/* Receive Enable                  */
-#define HSCR0_RIE	0x00000020	/* Receive FIFO 2/5-to-3/5-full or */
-                	        	/* more Interrupt Enable           */
-#define HSCR0_TIE	0x00000040	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define HSCR0_AME	0x00000080	/* Address Match Enable            */
-
-#define HSCR1_AMV	Fld (8, 0)	/* Address Match Value             */
-
-#define HSDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-#if 0           	        	/* Hidden receive FIFO bits        */
-#define HSDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
-#define HSDR_CRE	0x00000200	/*  receive CRC Error (read)       */
-#define HSDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
-#endif /* 0 */
-
-#define HSSR0_EIF	0x00000001	/* Error In FIFO (read)            */
-#define HSSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
-#define HSSR0_RAB	0x00000004	/* Receive ABort                   */
-#define HSSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define HSSR0_RFS	0x00000010	/* Receive FIFO 2/5-to-3/5-full or */
-                	        	/* more Service request (read)     */
-#define HSSR0_FRE	0x00000020	/* receive FRaming Error           */
-
-#define HSSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
-#define HSSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
-#define HSSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
-#define HSSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
-#define HSSR1_EOF	0x00000010	/* receive End-Of-Frame (read)     */
-#define HSSR1_CRE	0x00000020	/* receive CRC Error (read)        */
-#define HSSR1_ROR	0x00000040	/* Receive FIFO Over-Run (read)    */
-
-#define HSCR2_TXP	0x00040000	/* Transmit data Polarity (TXD_2)  */
-#define HSCR2_TrDataL	(HSCR2_TXP*0)	/*  Transmit Data active Low       */
-                	        	/*  (inverted)                     */
-#define HSCR2_TrDataH	(HSCR2_TXP*1)	/*  Transmit Data active High      */
-                	        	/*  (non-inverted)                 */
-#define HSCR2_RXP	0x00080000	/* Receive data Polarity (RXD_2)   */
-#define HSCR2_RcDataL	(HSCR2_RXP*0)	/*  Receive Data active Low        */
-                	        	/*  (inverted)                     */
-#define HSCR2_RcDataH	(HSCR2_RXP*1)	/*  Receive Data active High       */
-                	        	/*  (non-inverted)                 */
-
-
-/*
- * Multi-media Communications Port (MCP) control registers
- *
- * Registers
- *    Ser4MCCR0 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Control Register 0 (read/write).
- *    Ser4MCDR0 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Data Register 0 (audio, read/write).
- *    Ser4MCDR1 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Data Register 1 (telecom, read/write).
- *    Ser4MCDR2 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Data Register 2 (CODEC registers, read/write).
- *    Ser4MCSR  	Serial port 4 Multi-media Communications Port (MCP)
- *              	Status Register (read/write).
- *    Ser4MCCR1 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Control Register 1 (read/write).
- *              	[The MCCR1 register is only implemented in
- *              	versions 2.0 (rev. = 8) and higher of the StrongARM
- *              	SA-1100.]
- *
- * Clocks
- *    fmc, Tmc  	Frequency, period of the MCP communication (10 MHz,
- *              	12 MHz, or GPIO [21]).
- *    faud, Taud	Frequency, period of the audio sampling.
- *    ftcm, Ttcm	Frequency, period of the telecom sampling.
- */
-
-#define Ser4MCCR0	__REG(0x80060000)  /* Ser. port 4 MCP Control Reg. 0 */
-#define Ser4MCDR0	__REG(0x80060008)  /* Ser. port 4 MCP Data Reg. 0 (audio) */
-#define Ser4MCDR1	__REG(0x8006000C)  /* Ser. port 4 MCP Data Reg. 1 (telecom) */
-#define Ser4MCDR2	__REG(0x80060010)  /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
-#define Ser4MCSR	__REG(0x80060018)  /* Ser. port 4 MCP Status Reg. */
-#define Ser4MCCR1	__REG(0x90060030)  /* Ser. port 4 MCP Control Reg. 1 */
-
-#define MCCR0_ASD	Fld (7, 0)	/* Audio Sampling rate Divisor/32  */
-                	        	/* [6..127]                        */
-                	        	/* faud = fmc/(32*ASD)             */
-                	        	/* Taud = 32*ASD*Tmc               */
-#define MCCR0_AudSmpDiv(Div)    	/*  Audio Sampling rate Divisor    */ \
-                	        	/*  [192..4064]                    */ \
-                	((Div)/32 << FShft (MCCR0_ASD))
-                	        	/*  faud = fmc/(32*Floor (Div/32)) */
-                	        	/*  Taud = 32*Floor (Div/32)*Tmc   */
-#define MCCR0_CeilAudSmpDiv(Div)	/*  Ceil. of AudSmpDiv [192..4064] */ \
-                	(((Div) + 31)/32 << FShft (MCCR0_ASD))
-                	        	/*  faud = fmc/(32*Ceil (Div/32))  */
-                	        	/*  Taud = 32*Ceil (Div/32)*Tmc    */
-#define MCCR0_TSD	Fld (7, 8)	/* Telecom Sampling rate           */
-                	        	/* Divisor/32 [16..127]            */
-                	        	/* ftcm = fmc/(32*TSD)             */
-                	        	/* Ttcm = 32*TSD*Tmc               */
-#define MCCR0_TcmSmpDiv(Div)    	/*  Telecom Sampling rate Divisor  */ \
-                	        	/*  [512..4064]                    */ \
-                	((Div)/32 << FShft (MCCR0_TSD))
-                	        	/*  ftcm = fmc/(32*Floor (Div/32)) */
-                	        	/*  Ttcm = 32*Floor (Div/32)*Tmc   */
-#define MCCR0_CeilTcmSmpDiv(Div)	/*  Ceil. of TcmSmpDiv [512..4064] */ \
-                	(((Div) + 31)/32 << FShft (MCCR0_TSD))
-                	        	/*  ftcm = fmc/(32*Ceil (Div/32))  */
-                	        	/*  Ttcm = 32*Ceil (Div/32)*Tmc    */
-#define MCCR0_MCE	0x00010000	/* MCP Enable                      */
-#define MCCR0_ECS	0x00020000	/* External Clock Select           */
-#define MCCR0_IntClk	(MCCR0_ECS*0)	/*  Internal Clock (10 or 12 MHz)  */
-#define MCCR0_ExtClk	(MCCR0_ECS*1)	/*  External Clock (GPIO [21])     */
-#define MCCR0_ADM	0x00040000	/* A/D (audio/telecom) data        */
-                	        	/* sampling/storing Mode           */
-#define MCCR0_VldBit	(MCCR0_ADM*0)	/*  Valid Bit storing mode         */
-#define MCCR0_SmpCnt	(MCCR0_ADM*1)	/*  Sampling Counter storing mode  */
-#define MCCR0_TTE	0x00080000	/* Telecom Transmit FIFO 1/2-full  */
-                	        	/* or less interrupt Enable        */
-#define MCCR0_TRE	0x00100000	/* Telecom Receive FIFO 1/2-full   */
-                	        	/* or more interrupt Enable        */
-#define MCCR0_ATE	0x00200000	/* Audio Transmit FIFO 1/2-full    */
-                	        	/* or less interrupt Enable        */
-#define MCCR0_ARE	0x00400000	/* Audio Receive FIFO 1/2-full or  */
-                	        	/* more interrupt Enable           */
-#define MCCR0_LBM	0x00800000	/* Look-Back Mode                  */
-#define MCCR0_ECP	Fld (2, 24)	/* External Clock Prescaler - 1    */
-#define MCCR0_ExtClkDiv(Div)    	/*  External Clock Divisor [1..4]  */ \
-                	(((Div) - 1) << FShft (MCCR0_ECP))
-
-#define MCDR0_DATA	Fld (12, 4)	/* receive/transmit audio DATA     */
-                	        	/* FIFOs                           */
-
-#define MCDR1_DATA	Fld (14, 2)	/* receive/transmit telecom DATA   */
-                	        	/* FIFOs                           */
-
-                	        	/* receive/transmit CODEC reg.     */
-                	        	/* FIFOs:                          */
-#define MCDR2_DATA	Fld (16, 0)	/*  reg. DATA                      */
-#define MCDR2_RW	0x00010000	/*  reg. Read/Write (transmit)     */
-#define MCDR2_Rd	(MCDR2_RW*0)	/*   reg. Read                     */
-#define MCDR2_Wr	(MCDR2_RW*1)	/*   reg. Write                    */
-#define MCDR2_ADD	Fld (4, 17)	/*  reg. ADDress                   */
-
-#define MCSR_ATS	0x00000001	/* Audio Transmit FIFO 1/2-full    */
-                	        	/* or less Service request (read)  */
-#define MCSR_ARS	0x00000002	/* Audio Receive FIFO 1/2-full or  */
-                	        	/* more Service request (read)     */
-#define MCSR_TTS	0x00000004	/* Telecom Transmit FIFO 1/2-full  */
-                	        	/* or less Service request (read)  */
-#define MCSR_TRS	0x00000008	/* Telecom Receive FIFO 1/2-full   */
-                	        	/* or more Service request (read)  */
-#define MCSR_ATU	0x00000010	/* Audio Transmit FIFO Under-run   */
-#define MCSR_ARO	0x00000020	/* Audio Receive FIFO Over-run     */
-#define MCSR_TTU	0x00000040	/* Telecom Transmit FIFO Under-run */
-#define MCSR_TRO	0x00000080	/* Telecom Receive FIFO Over-run   */
-#define MCSR_ANF	0x00000100	/* Audio transmit FIFO Not Full    */
-                	        	/* (read)                          */
-#define MCSR_ANE	0x00000200	/* Audio receive FIFO Not Empty    */
-                	        	/* (read)                          */
-#define MCSR_TNF	0x00000400	/* Telecom transmit FIFO Not Full  */
-                	        	/* (read)                          */
-#define MCSR_TNE	0x00000800	/* Telecom receive FIFO Not Empty  */
-                	        	/* (read)                          */
-#define MCSR_CWC	0x00001000	/* CODEC register Write Completed  */
-                	        	/* (read)                          */
-#define MCSR_CRC	0x00002000	/* CODEC register Read Completed   */
-                	        	/* (read)                          */
-#define MCSR_ACE	0x00004000	/* Audio CODEC Enabled (read)      */
-#define MCSR_TCE	0x00008000	/* Telecom CODEC Enabled (read)    */
-
-#define MCCR1_CFS	0x00100000	/* Clock Freq. Select              */
-#define MCCR1_F12MHz	(MCCR1_CFS*0)	/*  Freq. (fmc) = ~ 12 MHz         */
-                	        	/*  (11.981 MHz)                   */
-#define MCCR1_F10MHz	(MCCR1_CFS*1)	/*  Freq. (fmc) = ~ 10 MHz         */
-                	        	/*  (9.585 MHz)                    */
-
-
-/*
- * Synchronous Serial Port (SSP) control registers
- *
- * Registers
- *    Ser4SSCR0 	Serial port 4 Synchronous Serial Port (SSP) Control
- *              	Register 0 (read/write).
- *    Ser4SSCR1 	Serial port 4 Synchronous Serial Port (SSP) Control
- *              	Register 1 (read/write).
- *              	[Bits SPO and SP are only implemented in versions 2.0
- *              	(rev. = 8) and higher of the StrongARM SA-1100.]
- *    Ser4SSDR  	Serial port 4 Synchronous Serial Port (SSP) Data
- *              	Register (read/write).
- *    Ser4SSSR  	Serial port 4 Synchronous Serial Port (SSP) Status
- *              	Register (read/write).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fss, Tss  	Frequency, period of the SSP communication.
- */
-
-#define Ser4SSCR0	__REG(0x80070060)  /* Ser. port 4 SSP Control Reg. 0 */
-#define Ser4SSCR1	__REG(0x80070064)  /* Ser. port 4 SSP Control Reg. 1 */
-#define Ser4SSDR	__REG(0x8007006C)  /* Ser. port 4 SSP Data Reg. */
-#define Ser4SSSR	__REG(0x80070074)  /* Ser. port 4 SSP Status Reg. */
-
-#define SSCR0_DSS	Fld (4, 0)	/* Data Size - 1 Select [3..15]    */
-#define SSCR0_DataSize(Size)    	/*  Data Size Select [4..16]       */ \
-                	(((Size) - 1) << FShft (SSCR0_DSS))
-#define SSCR0_FRF	Fld (2, 4)	/* FRame Format                    */
-#define SSCR0_Motorola	        	/*  Motorola Serial Peripheral     */ \
-                	        	/*  Interface (SPI) format         */ \
-                	(0 << FShft (SSCR0_FRF))
-#define SSCR0_TI	        	/*  Texas Instruments Synchronous  */ \
-                	        	/*  Serial format                  */ \
-                	(1 << FShft (SSCR0_FRF))
-#define SSCR0_National	        	/*  National Microwire format      */ \
-                	(2 << FShft (SSCR0_FRF))
-#define SSCR0_SSE	0x00000080	/* SSP Enable                      */
-#define SSCR0_SCR	Fld (8, 8)	/* Serial Clock Rate divisor/2 - 1 */
-                	        	/* fss = fxtl/(2*(SCR + 1))        */
-                	        	/* Tss = 2*(SCR + 1)*Txtl          */
-#define SSCR0_SerClkDiv(Div)    	/*  Serial Clock Divisor [2..512]  */ \
-                	(((Div) - 2)/2 << FShft (SSCR0_SCR))
-                	        	/*  fss = fxtl/(2*Floor (Div/2))   */
-                	        	/*  Tss = 2*Floor (Div/2)*Txtl     */
-#define SSCR0_CeilSerClkDiv(Div)	/*  Ceil. of SerClkDiv [2..512]    */ \
-                	(((Div) - 1)/2 << FShft (SSCR0_SCR))
-                	        	/*  fss = fxtl/(2*Ceil (Div/2))    */
-                	        	/*  Tss = 2*Ceil (Div/2)*Txtl      */
-
-#define SSCR1_RIE	0x00000001	/* Receive FIFO 1/2-full or more   */
-                	        	/* Interrupt Enable                */
-#define SSCR1_TIE	0x00000002	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define SSCR1_LBM	0x00000004	/* Look-Back Mode                  */
-#define SSCR1_SPO	0x00000008	/* Sample clock (SCLK) POlarity    */
-#define SSCR1_SClkIactL	(SSCR1_SPO*0)	/*  Sample Clock Inactive Low      */
-#define SSCR1_SClkIactH	(SSCR1_SPO*1)	/*  Sample Clock Inactive High     */
-#define SSCR1_SP	0x00000010	/* Sample clock (SCLK) Phase       */
-#define SSCR1_SClk1P	(SSCR1_SP*0)	/*  Sample Clock active 1 Period   */
-                	        	/*  after frame (SFRM, 1st edge)   */
-#define SSCR1_SClk1_2P	(SSCR1_SP*1)	/*  Sample Clock active 1/2 Period */
-                	        	/*  after frame (SFRM, 1st edge)   */
-#define SSCR1_ECS	0x00000020	/* External Clock Select           */
-#define SSCR1_IntClk	(SSCR1_ECS*0)	/*  Internal Clock                 */
-#define SSCR1_ExtClk	(SSCR1_ECS*1)	/*  External Clock (GPIO [19])     */
-
-#define SSDR_DATA	Fld (16, 0)	/* receive/transmit DATA FIFOs     */
-
-#define SSSR_TNF	0x00000002	/* Transmit FIFO Not Full (read)   */
-#define SSSR_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
-#define SSSR_BSY	0x00000008	/* SSP BuSY (read)                 */
-#define SSSR_TFS	0x00000010	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define SSSR_RFS	0x00000020	/* Receive FIFO 1/2-full or more   */
-                	        	/* Service request (read)          */
-#define SSSR_ROR	0x00000040	/* Receive FIFO Over-Run           */
-
-
-/*
- * Operating System (OS) timer control registers
- *
- * Registers
- *    OSMR0     	Operating System (OS) timer Match Register 0
- *              	(read/write).
- *    OSMR1     	Operating System (OS) timer Match Register 1
- *              	(read/write).
- *    OSMR2     	Operating System (OS) timer Match Register 2
- *              	(read/write).
- *    OSMR3     	Operating System (OS) timer Match Register 3
- *              	(read/write).
- *    OSCR      	Operating System (OS) timer Counter Register
- *              	(read/write).
- *    OSSR      	Operating System (OS) timer Status Register
- *              	(read/write).
- *    OWER      	Operating System (OS) timer Watch-dog Enable Register
- *              	(read/write).
- *    OIER      	Operating System (OS) timer Interrupt Enable Register
- *              	(read/write).
- */
-
-#define OSMR0  		__REG(0x90000000)  /* OS timer Match Reg. 0 */
-#define OSMR1  		__REG(0x90000004)  /* OS timer Match Reg. 1 */
-#define OSMR2  		__REG(0x90000008)  /* OS timer Match Reg. 2 */
-#define OSMR3  		__REG(0x9000000c)  /* OS timer Match Reg. 3 */
-#define OSCR   	__REG(0x90000010)  /* OS timer Counter Reg. */
-#define OSSR   	__REG(0x90000014	)  /* OS timer Status Reg. */
-#define OWER   	__REG(0x90000018	)  /* OS timer Watch-dog Enable Reg. */
-#define OIER   	__REG(0x9000001C	)  /* OS timer Interrupt Enable Reg. */
-
-#define OSSR_M(Nb)	        	/* Match detected [0..3]           */ \
-                	(0x00000001 << (Nb))
-#define OSSR_M0 	OSSR_M (0)	/* Match detected 0                */
-#define OSSR_M1 	OSSR_M (1)	/* Match detected 1                */
-#define OSSR_M2 	OSSR_M (2)	/* Match detected 2                */
-#define OSSR_M3 	OSSR_M (3)	/* Match detected 3                */
-
-#define OWER_WME	0x00000001	/* Watch-dog Match Enable          */
-                	        	/* (set only)                      */
-
-#define OIER_E(Nb)	        	/* match interrupt Enable [0..3]   */ \
-                	(0x00000001 << (Nb))
-#define OIER_E0 	OIER_E (0)	/* match interrupt Enable 0        */
-#define OIER_E1 	OIER_E (1)	/* match interrupt Enable 1        */
-#define OIER_E2 	OIER_E (2)	/* match interrupt Enable 2        */
-#define OIER_E3 	OIER_E (3)	/* match interrupt Enable 3        */
-
-
-/*
- * Real-Time Clock (RTC) control registers
- *
- * Registers
- *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
- *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
- *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
- *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
- *
- * Clocks
- *    frtx, Trtx	Frequency, period of the real-time clock crystal
- *              	(32.768 kHz nominal).
- *    frtc, Trtc	Frequency, period of the real-time clock counter
- *              	(1 Hz nominal).
- */
-
-#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
-#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
-#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
-#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
-
-#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
-#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
-                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
-                	        	/*        (1023*(C + 1)^2)         */
-                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
-                	        	/*        (1023*(C + 1) - D)       */
-
-#define RTSR_AL 	0x00000001	/* ALarm detected                  */
-#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
-#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
-#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
-
-
-/*
- * Power Manager (PM) control registers
- *
- * Registers
- *    PMCR      	Power Manager (PM) Control Register (read/write).
- *    PSSR      	Power Manager (PM) Sleep Status Register (read/write).
- *    PSPR      	Power Manager (PM) Scratch-Pad Register (read/write).
- *    PWER      	Power Manager (PM) Wake-up Enable Register
- *              	(read/write).
- *    PCFR      	Power Manager (PM) general ConFiguration Register
- *              	(read/write).
- *    PPCR      	Power Manager (PM) Phase-Locked Loop (PLL)
- *              	Configuration Register (read/write).
- *    PGSR      	Power Manager (PM) General-Purpose Input/Output (GPIO)
- *              	Sleep state Register (read/write, see GPIO pins).
- *    POSR      	Power Manager (PM) Oscillator Status Register (read).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- */
-
-#define PMCR		__REG(0x90020000)  /* PM Control Reg. */
-#define PSSR		__REG(0x90020004)  /* PM Sleep Status Reg. */
-#define PSPR		__REG(0x90020008)  /* PM Scratch-Pad Reg. */
-#define PWER		__REG(0x9002000C)  /* PM Wake-up Enable Reg. */
-#define PCFR		__REG(0x90020010)  /* PM general ConFiguration Reg. */
-#define PPCR		__REG(0x90020014)  /* PM PLL Configuration Reg. */
-#define PGSR		__REG(0x90020018)  /* PM GPIO Sleep state Reg. */
-#define POSR		__REG(0x9002001C)  /* PM Oscillator Status Reg. */
-
-#define PMCR_SF 	0x00000001	/* Sleep Force (set only)          */
-
-#define PSSR_SS 	0x00000001	/* Software Sleep                  */
-#define PSSR_BFS	0x00000002	/* Battery Fault Status            */
-                	        	/* (BATT_FAULT)                    */
-#define PSSR_VFS	0x00000004	/* Vdd Fault Status (VDD_FAULT)    */
-#define PSSR_DH 	0x00000008	/* DRAM control Hold               */
-#define PSSR_PH 	0x00000010	/* Peripheral control Hold         */
-
-#define PWER_GPIO(Nb)	GPIO_GPIO (Nb)	/* GPIO [0..27] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_GPIO16	PWER_GPIO (16)	/* GPIO [16] wake-up enable        */
-#define PWER_GPIO17	PWER_GPIO (17)	/* GPIO [17] wake-up enable        */
-#define PWER_GPIO18	PWER_GPIO (18)	/* GPIO [18] wake-up enable        */
-#define PWER_GPIO19	PWER_GPIO (19)	/* GPIO [19] wake-up enable        */
-#define PWER_GPIO20	PWER_GPIO (20)	/* GPIO [20] wake-up enable        */
-#define PWER_GPIO21	PWER_GPIO (21)	/* GPIO [21] wake-up enable        */
-#define PWER_GPIO22	PWER_GPIO (22)	/* GPIO [22] wake-up enable        */
-#define PWER_GPIO23	PWER_GPIO (23)	/* GPIO [23] wake-up enable        */
-#define PWER_GPIO24	PWER_GPIO (24)	/* GPIO [24] wake-up enable        */
-#define PWER_GPIO25	PWER_GPIO (25)	/* GPIO [25] wake-up enable        */
-#define PWER_GPIO26	PWER_GPIO (26)	/* GPIO [26] wake-up enable        */
-#define PWER_GPIO27	PWER_GPIO (27)	/* GPIO [27] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
-#define PCFR_OPDE	0x00000001	/* Oscillator Power-Down Enable    */
-#define PCFR_ClkRun	(PCFR_OPDE*0)	/*  Clock Running in sleep mode    */
-#define PCFR_ClkStp	(PCFR_OPDE*1)	/*  Clock Stopped in sleep mode    */
-#define PCFR_FP 	0x00000002	/* Float PCMCIA pins               */
-#define PCFR_PCMCIANeg	(PCFR_FP*0)	/*  PCMCIA pins Negated (1)        */
-#define PCFR_PCMCIAFlt	(PCFR_FP*1)	/*  PCMCIA pins Floating           */
-#define PCFR_FS 	0x00000004	/* Float Static memory pins        */
-#define PCFR_StMemNeg	(PCFR_FS*0)	/*  Static Memory pins Negated (1) */
-#define PCFR_StMemFlt	(PCFR_FS*1)	/*  Static Memory pins Floating    */
-#define PCFR_FO 	0x00000008	/* Force RTC oscillator            */
-                	        	/* (32.768 kHz) enable On          */
-
-#define PPCR_CCF	Fld (5, 0)	/* CPU core Clock (CCLK) Freq.     */
-#define PPCR_Fx16	        	/*  Freq. x 16 (fcpu = 16*fxtl)    */ \
-                	(0x00 << FShft (PPCR_CCF))
-#define PPCR_Fx20	        	/*  Freq. x 20 (fcpu = 20*fxtl)    */ \
-                	(0x01 << FShft (PPCR_CCF))
-#define PPCR_Fx24	        	/*  Freq. x 24 (fcpu = 24*fxtl)    */ \
-                	(0x02 << FShft (PPCR_CCF))
-#define PPCR_Fx28	        	/*  Freq. x 28 (fcpu = 28*fxtl)    */ \
-                	(0x03 << FShft (PPCR_CCF))
-#define PPCR_Fx32	        	/*  Freq. x 32 (fcpu = 32*fxtl)    */ \
-                	(0x04 << FShft (PPCR_CCF))
-#define PPCR_Fx36	        	/*  Freq. x 36 (fcpu = 36*fxtl)    */ \
-                	(0x05 << FShft (PPCR_CCF))
-#define PPCR_Fx40	        	/*  Freq. x 40 (fcpu = 40*fxtl)    */ \
-                	(0x06 << FShft (PPCR_CCF))
-#define PPCR_Fx44	        	/*  Freq. x 44 (fcpu = 44*fxtl)    */ \
-                	(0x07 << FShft (PPCR_CCF))
-#define PPCR_Fx48	        	/*  Freq. x 48 (fcpu = 48*fxtl)    */ \
-                	(0x08 << FShft (PPCR_CCF))
-#define PPCR_Fx52	        	/*  Freq. x 52 (fcpu = 52*fxtl)    */ \
-                	(0x09 << FShft (PPCR_CCF))
-#define PPCR_Fx56	        	/*  Freq. x 56 (fcpu = 56*fxtl)    */ \
-                	(0x0A << FShft (PPCR_CCF))
-#define PPCR_Fx60	        	/*  Freq. x 60 (fcpu = 60*fxtl)    */ \
-                	(0x0B << FShft (PPCR_CCF))
-#define PPCR_Fx64	        	/*  Freq. x 64 (fcpu = 64*fxtl)    */ \
-                	(0x0C << FShft (PPCR_CCF))
-#define PPCR_Fx68	        	/*  Freq. x 68 (fcpu = 68*fxtl)    */ \
-                	(0x0D << FShft (PPCR_CCF))
-#define PPCR_Fx72	        	/*  Freq. x 72 (fcpu = 72*fxtl)    */ \
-                	(0x0E << FShft (PPCR_CCF))
-#define PPCR_Fx76	        	/*  Freq. x 76 (fcpu = 76*fxtl)    */ \
-                	(0x0F << FShft (PPCR_CCF))
-                	        	/*  3.6864 MHz crystal (fxtl):     */
-#define PPCR_F59_0MHz	PPCR_Fx16	/*   Freq. (fcpu) =  59.0 MHz      */
-#define PPCR_F73_7MHz	PPCR_Fx20	/*   Freq. (fcpu) =  73.7 MHz      */
-#define PPCR_F88_5MHz	PPCR_Fx24	/*   Freq. (fcpu) =  88.5 MHz      */
-#define PPCR_F103_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 103.2 MHz      */
-#define PPCR_F118_0MHz	PPCR_Fx32	/*   Freq. (fcpu) = 118.0 MHz      */
-#define PPCR_F132_7MHz	PPCR_Fx36	/*   Freq. (fcpu) = 132.7 MHz      */
-#define PPCR_F147_5MHz	PPCR_Fx40	/*   Freq. (fcpu) = 147.5 MHz      */
-#define PPCR_F162_2MHz	PPCR_Fx44	/*   Freq. (fcpu) = 162.2 MHz      */
-#define PPCR_F176_9MHz	PPCR_Fx48	/*   Freq. (fcpu) = 176.9 MHz      */
-#define PPCR_F191_7MHz	PPCR_Fx52	/*   Freq. (fcpu) = 191.7 MHz      */
-#define PPCR_F206_4MHz	PPCR_Fx56	/*   Freq. (fcpu) = 206.4 MHz      */
-#define PPCR_F221_2MHz	PPCR_Fx60	/*   Freq. (fcpu) = 221.2 MHz      */
-#define PPCR_F239_6MHz	PPCR_Fx64	/*   Freq. (fcpu) = 239.6 MHz      */
-#define PPCR_F250_7MHz	PPCR_Fx68	/*   Freq. (fcpu) = 250.7 MHz      */
-#define PPCR_F265_4MHz	PPCR_Fx72	/*   Freq. (fcpu) = 265.4 MHz      */
-#define PPCR_F280_2MHz	PPCR_Fx76	/*   Freq. (fcpu) = 280.2 MHz      */
-                	        	/*  3.5795 MHz crystal (fxtl):     */
-#define PPCR_F57_3MHz	PPCR_Fx16	/*   Freq. (fcpu) =  57.3 MHz      */
-#define PPCR_F71_6MHz	PPCR_Fx20	/*   Freq. (fcpu) =  71.6 MHz      */
-#define PPCR_F85_9MHz	PPCR_Fx24	/*   Freq. (fcpu) =  85.9 MHz      */
-#define PPCR_F100_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 100.2 MHz      */
-#define PPCR_F114_5MHz	PPCR_Fx32	/*   Freq. (fcpu) = 114.5 MHz      */
-#define PPCR_F128_9MHz	PPCR_Fx36	/*   Freq. (fcpu) = 128.9 MHz      */
-#define PPCR_F143_2MHz	PPCR_Fx40	/*   Freq. (fcpu) = 143.2 MHz      */
-#define PPCR_F157_5MHz	PPCR_Fx44	/*   Freq. (fcpu) = 157.5 MHz      */
-#define PPCR_F171_8MHz	PPCR_Fx48	/*   Freq. (fcpu) = 171.8 MHz      */
-#define PPCR_F186_1MHz	PPCR_Fx52	/*   Freq. (fcpu) = 186.1 MHz      */
-#define PPCR_F200_5MHz	PPCR_Fx56	/*   Freq. (fcpu) = 200.5 MHz      */
-#define PPCR_F214_8MHz	PPCR_Fx60	/*   Freq. (fcpu) = 214.8 MHz      */
-#define PPCR_F229_1MHz	PPCR_Fx64	/*   Freq. (fcpu) = 229.1 MHz      */
-#define PPCR_F243_4MHz	PPCR_Fx68	/*   Freq. (fcpu) = 243.4 MHz      */
-#define PPCR_F257_7MHz	PPCR_Fx72	/*   Freq. (fcpu) = 257.7 MHz      */
-#define PPCR_F272_0MHz	PPCR_Fx76	/*   Freq. (fcpu) = 272.0 MHz      */
-
-#define POSR_OOK	0x00000001	/* RTC Oscillator (32.768 kHz) OK  */
-
-
-/*
- * Reset Controller (RC) control registers
- *
- * Registers
- *    RSRR      	Reset Controller (RC) Software Reset Register
- *              	(read/write).
- *    RCSR      	Reset Controller (RC) Status Register (read/write).
- */
-
-#define RSRR		__REG(0x90030000)  /* RC Software Reset Reg. */
-#define RCSR		__REG(0x90030004)  /* RC Status Reg. */
-
-#define RSRR_SWR	0x00000001	/* SoftWare Reset (set only)       */
-
-#define RCSR_HWR	0x00000001	/* HardWare Reset                  */
-#define RCSR_SWR	0x00000002	/* SoftWare Reset                  */
-#define RCSR_WDR	0x00000004	/* Watch-Dog Reset                 */
-#define RCSR_SMR	0x00000008	/* Sleep-Mode Reset                */
-
-
-/*
- * Test unit control registers
- *
- * Registers
- *    TUCR      	Test Unit Control Register (read/write).
- */
-
-#define TUCR		__REG(0x90030008)  /* Test Unit Control Reg. */
-
-#define TUCR_TIC	0x00000040	/* TIC mode                        */
-#define TUCR_TTST	0x00000080	/* Trim TeST mode                  */
-#define TUCR_RCRC	0x00000100	/* Richard's Cyclic Redundancy     */
-                	        	/* Check                           */
-#define TUCR_PMD	0x00000200	/* Power Management Disable        */
-#define TUCR_MR 	0x00000400	/* Memory Request mode             */
-#define TUCR_NoMB	(TUCR_MR*0)	/*  No Memory Bus request & grant  */
-#define TUCR_MBGPIO	(TUCR_MR*1)	/*  Memory Bus request (MBREQ) &   */
-                	        	/*  grant (MBGNT) on GPIO [22:21]  */
-#define TUCR_CTB	Fld (3, 20)	/* Clock Test Bits                 */
-#define TUCR_FDC	0x00800000	/* RTC Force Delete Count          */
-#define TUCR_FMC	0x01000000	/* Force Michelle's Control mode   */
-#define TUCR_TMC	0x02000000	/* RTC Trimmer Multiplexer Control */
-#define TUCR_DPS	0x04000000	/* Disallow Pad Sleep              */
-#define TUCR_TSEL	Fld (3, 29)	/* clock Test SELect on GPIO [27]  */
-#define TUCR_32_768kHz	        	/*  32.768 kHz osc. on GPIO [27]   */ \
-                	(0 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHz	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
-                	(1 << FShft (TUCR_TSEL))
-#define TUCR_VDD	        	/*  VDD ring osc./16 on GPIO [27]  */ \
-                	(2 << FShft (TUCR_TSEL))
-#define TUCR_96MHzPLL	        	/*  96 MHz PLL/4 on GPIO [27]      */ \
-                	(3 << FShft (TUCR_TSEL))
-#define TUCR_Clock	        	/*  internal (fcpu/2) & 32.768 kHz */ \
-                	        	/*  Clocks on GPIO [26:27]         */ \
-                	(4 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHzA	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
-                	        	/*  (Alternative)                  */ \
-                	(5 << FShft (TUCR_TSEL))
-#define TUCR_MainPLL	        	/*  Main PLL/16 on GPIO [27]       */ \
-                	(6 << FShft (TUCR_TSEL))
-#define TUCR_VDDL	        	/*  VDDL ring osc./4 on GPIO [27]  */ \
-                	(7 << FShft (TUCR_TSEL))
-
-
-/*
- * General-Purpose Input/Output (GPIO) control registers
- *
- * Registers
- *    GPLR      	General-Purpose Input/Output (GPIO) Pin Level
- *              	Register (read).
- *    GPDR      	General-Purpose Input/Output (GPIO) Pin Direction
- *              	Register (read/write).
- *    GPSR      	General-Purpose Input/Output (GPIO) Pin output Set
- *              	Register (write).
- *    GPCR      	General-Purpose Input/Output (GPIO) Pin output Clear
- *              	Register (write).
- *    GRER      	General-Purpose Input/Output (GPIO) Rising-Edge
- *              	detect Register (read/write).
- *    GFER      	General-Purpose Input/Output (GPIO) Falling-Edge
- *              	detect Register (read/write).
- *    GEDR      	General-Purpose Input/Output (GPIO) Edge Detect
- *              	status Register (read/write).
- *    GAFR      	General-Purpose Input/Output (GPIO) Alternate
- *              	Function Register (read/write).
- *
- * Clock
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- */
-
-#define GPLR		__REG(0x90040000)  /* GPIO Pin Level Reg.             */
-#define GPDR		__REG(0x90040004)  /* GPIO Pin Direction Reg.         */
-#define GPSR		__REG(0x90040008)  /* GPIO Pin output Set Reg.        */
-#define GPCR		__REG(0x9004000C)  /* GPIO Pin output Clear Reg.      */
-#define GRER		__REG(0x90040010)  /* GPIO Rising-Edge detect Reg.    */
-#define GFER		__REG(0x90040014)  /* GPIO Falling-Edge detect Reg.   */
-#define GEDR		__REG(0x90040018)  /* GPIO Edge Detect status Reg.    */
-#define GAFR		__REG(0x9004001C)  /* GPIO Alternate Function Reg.    */
-
-#define GPIO_MIN	(0)
-#define GPIO_MAX	(27)
-
-#define GPIO_GPIO(Nb)	        	/* GPIO [0..27]                    */ \
-                	(0x00000001 << (Nb))
-#define GPIO_GPIO0	GPIO_GPIO (0)	/* GPIO  [0]                       */
-#define GPIO_GPIO1	GPIO_GPIO (1)	/* GPIO  [1]                       */
-#define GPIO_GPIO2	GPIO_GPIO (2)	/* GPIO  [2]                       */
-#define GPIO_GPIO3	GPIO_GPIO (3)	/* GPIO  [3]                       */
-#define GPIO_GPIO4	GPIO_GPIO (4)	/* GPIO  [4]                       */
-#define GPIO_GPIO5	GPIO_GPIO (5)	/* GPIO  [5]                       */
-#define GPIO_GPIO6	GPIO_GPIO (6)	/* GPIO  [6]                       */
-#define GPIO_GPIO7	GPIO_GPIO (7)	/* GPIO  [7]                       */
-#define GPIO_GPIO8	GPIO_GPIO (8)	/* GPIO  [8]                       */
-#define GPIO_GPIO9	GPIO_GPIO (9)	/* GPIO  [9]                       */
-#define GPIO_GPIO10	GPIO_GPIO (10)	/* GPIO [10]                       */
-#define GPIO_GPIO11	GPIO_GPIO (11)	/* GPIO [11]                       */
-#define GPIO_GPIO12	GPIO_GPIO (12)	/* GPIO [12]                       */
-#define GPIO_GPIO13	GPIO_GPIO (13)	/* GPIO [13]                       */
-#define GPIO_GPIO14	GPIO_GPIO (14)	/* GPIO [14]                       */
-#define GPIO_GPIO15	GPIO_GPIO (15)	/* GPIO [15]                       */
-#define GPIO_GPIO16	GPIO_GPIO (16)	/* GPIO [16]                       */
-#define GPIO_GPIO17	GPIO_GPIO (17)	/* GPIO [17]                       */
-#define GPIO_GPIO18	GPIO_GPIO (18)	/* GPIO [18]                       */
-#define GPIO_GPIO19	GPIO_GPIO (19)	/* GPIO [19]                       */
-#define GPIO_GPIO20	GPIO_GPIO (20)	/* GPIO [20]                       */
-#define GPIO_GPIO21	GPIO_GPIO (21)	/* GPIO [21]                       */
-#define GPIO_GPIO22	GPIO_GPIO (22)	/* GPIO [22]                       */
-#define GPIO_GPIO23	GPIO_GPIO (23)	/* GPIO [23]                       */
-#define GPIO_GPIO24	GPIO_GPIO (24)	/* GPIO [24]                       */
-#define GPIO_GPIO25	GPIO_GPIO (25)	/* GPIO [25]                       */
-#define GPIO_GPIO26	GPIO_GPIO (26)	/* GPIO [26]                       */
-#define GPIO_GPIO27	GPIO_GPIO (27)	/* GPIO [27]                       */
-
-#define GPIO_LDD(Nb)	        	/* LCD Data [8..15] (O)            */ \
-                	GPIO_GPIO ((Nb) - 6)
-#define GPIO_LDD8	GPIO_LDD (8)	/* LCD Data  [8] (O)               */
-#define GPIO_LDD9	GPIO_LDD (9)	/* LCD Data  [9] (O)               */
-#define GPIO_LDD10	GPIO_LDD (10)	/* LCD Data [10] (O)               */
-#define GPIO_LDD11	GPIO_LDD (11)	/* LCD Data [11] (O)               */
-#define GPIO_LDD12	GPIO_LDD (12)	/* LCD Data [12] (O)               */
-#define GPIO_LDD13	GPIO_LDD (13)	/* LCD Data [13] (O)               */
-#define GPIO_LDD14	GPIO_LDD (14)	/* LCD Data [14] (O)               */
-#define GPIO_LDD15	GPIO_LDD (15)	/* LCD Data [15] (O)               */
-                	        	/* ser. port 4:                    */
-#define GPIO_SSP_TXD	GPIO_GPIO (10)	/*  SSP Transmit Data (O)          */
-#define GPIO_SSP_RXD	GPIO_GPIO (11)	/*  SSP Receive Data (I)           */
-#define GPIO_SSP_SCLK	GPIO_GPIO (12)	/*  SSP Sample CLocK (O)           */
-#define GPIO_SSP_SFRM	GPIO_GPIO (13)	/*  SSP Sample FRaMe (O)           */
-                	        	/* ser. port 1:                    */
-#define GPIO_UART_TXD	GPIO_GPIO (14)	/*  UART Transmit Data (O)         */
-#define GPIO_UART_RXD	GPIO_GPIO (15)	/*  UART Receive Data (I)          */
-#define GPIO_SDLC_SCLK	GPIO_GPIO (16)	/*  SDLC Sample CLocK (I/O)        */
-#define GPIO_SDLC_AAF	GPIO_GPIO (17)	/*  SDLC Abort After Frame (O)     */
-#define GPIO_UART_SCLK1	GPIO_GPIO (18)	/*  UART Sample CLocK 1 (I)        */
-                	        	/* ser. port 4:                    */
-#define GPIO_SSP_CLK	GPIO_GPIO (19)	/*  SSP external CLocK (I)         */
-                	        	/* ser. port 3:                    */
-#define GPIO_UART_SCLK3	GPIO_GPIO (20)	/*  UART Sample CLocK 3 (I)        */
-                	        	/* ser. port 4:                    */
-#define GPIO_MCP_CLK	GPIO_GPIO (21)	/*  MCP CLocK (I)                  */
-                	        	/* test controller:                */
-#define GPIO_TIC_ACK	GPIO_GPIO (21)	/*  TIC ACKnowledge (O)            */
-#define GPIO_MBGNT	GPIO_GPIO (21)	/*  Memory Bus GraNT (O)           */
-#define GPIO_TREQA	GPIO_GPIO (22)	/*  TIC REQuest A (I)              */
-#define GPIO_MBREQ	GPIO_GPIO (22)	/*  Memory Bus REQuest (I)         */
-#define GPIO_TREQB	GPIO_GPIO (23)	/*  TIC REQuest B (I)              */
-#define GPIO_1Hz	GPIO_GPIO (25)	/* 1 Hz clock (O)                  */
-#define GPIO_RCLK	GPIO_GPIO (26)	/* internal (R) CLocK (O, fcpu/2)  */
-#define GPIO_32_768kHz	GPIO_GPIO (27)	/* 32.768 kHz clock (O, RTC)       */
-
-#define GPDR_In 	0       	/* Input                           */
-#define GPDR_Out	1       	/* Output                          */
-
-
-/*
- * Interrupt Controller (IC) control registers
- *
- * Registers
- *    ICIP      	Interrupt Controller (IC) Interrupt ReQuest (IRQ)
- *              	Pending register (read).
- *    ICMR      	Interrupt Controller (IC) Mask Register (read/write).
- *    ICLR      	Interrupt Controller (IC) Level Register (read/write).
- *    ICCR      	Interrupt Controller (IC) Control Register
- *              	(read/write).
- *              	[The ICCR register is only implemented in versions 2.0
- *              	(rev. = 8) and higher of the StrongARM SA-1100.]
- *    ICFP      	Interrupt Controller (IC) Fast Interrupt reQuest
- *              	(FIQ) Pending register (read).
- *    ICPR      	Interrupt Controller (IC) Pending Register (read).
- *              	[The ICPR register is active low (inverted) in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it is active high (non-inverted) in
- *              	versions 2.0 (rev. = 8) and higher.]
- */
-
-#define ICIP		__REG(0x90050000)  /* IC IRQ Pending reg.             */
-#define ICMR		__REG(0x90050004)  /* IC Mask Reg.                    */
-#define ICLR		__REG(0x90050008)  /* IC Level Reg.                   */
-#define ICCR		__REG(0x9005000C)  /* IC Control Reg.                 */
-#define ICFP		__REG(0x90050010)  /* IC FIQ Pending reg.             */
-#define ICPR		__REG(0x90050020)  /* IC Pending Reg.                 */
-
-#define IC_GPIO(Nb)	        	/* GPIO [0..10]                    */ \
-                	(0x00000001 << (Nb))
-#define IC_GPIO0	IC_GPIO (0)	/* GPIO  [0]                       */
-#define IC_GPIO1	IC_GPIO (1)	/* GPIO  [1]                       */
-#define IC_GPIO2	IC_GPIO (2)	/* GPIO  [2]                       */
-#define IC_GPIO3	IC_GPIO (3)	/* GPIO  [3]                       */
-#define IC_GPIO4	IC_GPIO (4)	/* GPIO  [4]                       */
-#define IC_GPIO5	IC_GPIO (5)	/* GPIO  [5]                       */
-#define IC_GPIO6	IC_GPIO (6)	/* GPIO  [6]                       */
-#define IC_GPIO7	IC_GPIO (7)	/* GPIO  [7]                       */
-#define IC_GPIO8	IC_GPIO (8)	/* GPIO  [8]                       */
-#define IC_GPIO9	IC_GPIO (9)	/* GPIO  [9]                       */
-#define IC_GPIO10	IC_GPIO (10)	/* GPIO [10]                       */
-#define IC_GPIO11_27	0x00000800	/* GPIO [11:27] (ORed)             */
-#define IC_LCD  	0x00001000	/* LCD controller                  */
-#define IC_Ser0UDC	0x00002000	/* Ser. port 0 UDC                 */
-#define IC_Ser1SDLC	0x00004000	/* Ser. port 1 SDLC                */
-#define IC_Ser1UART	0x00008000	/* Ser. port 1 UART                */
-#define IC_Ser2ICP	0x00010000	/* Ser. port 2 ICP                 */
-#define IC_Ser3UART	0x00020000	/* Ser. port 3 UART                */
-#define IC_Ser4MCP	0x00040000	/* Ser. port 4 MCP                 */
-#define IC_Ser4SSP	0x00080000	/* Ser. port 4 SSP                 */
-#define IC_DMA(Nb)	        	/* DMA controller channel [0..5]   */ \
-                	(0x00100000 << (Nb))
-#define IC_DMA0 	IC_DMA (0)	/* DMA controller channel 0        */
-#define IC_DMA1 	IC_DMA (1)	/* DMA controller channel 1        */
-#define IC_DMA2 	IC_DMA (2)	/* DMA controller channel 2        */
-#define IC_DMA3 	IC_DMA (3)	/* DMA controller channel 3        */
-#define IC_DMA4 	IC_DMA (4)	/* DMA controller channel 4        */
-#define IC_DMA5 	IC_DMA (5)	/* DMA controller channel 5        */
-#define IC_OST(Nb)	        	/* OS Timer match [0..3]           */ \
-                	(0x04000000 << (Nb))
-#define IC_OST0 	IC_OST (0)	/* OS Timer match 0                */
-#define IC_OST1 	IC_OST (1)	/* OS Timer match 1                */
-#define IC_OST2 	IC_OST (2)	/* OS Timer match 2                */
-#define IC_OST3 	IC_OST (3)	/* OS Timer match 3                */
-#define IC_RTC1Hz	0x40000000	/* RTC 1 Hz clock                  */
-#define IC_RTCAlrm	0x80000000	/* RTC Alarm                       */
-
-#define ICLR_IRQ	0       	/* Interrupt ReQuest               */
-#define ICLR_FIQ	1       	/* Fast Interrupt reQuest          */
-
-#define ICCR_DIM	0x00000001	/* Disable Idle-mode interrupt     */
-                	        	/* Mask                            */
-#define ICCR_IdleAllInt	(ICCR_DIM*0)	/*  Idle-mode All Interrupt enable */
-                	        	/*  (ICMR ignored)                 */
-#define ICCR_IdleMskInt	(ICCR_DIM*1)	/*  Idle-mode non-Masked Interrupt */
-                	        	/*  enable (ICMR used)             */
-
-
-/*
- * Peripheral Pin Controller (PPC) control registers
- *
- * Registers
- *    PPDR      	Peripheral Pin Controller (PPC) Pin Direction
- *              	Register (read/write).
- *    PPSR      	Peripheral Pin Controller (PPC) Pin State Register
- *              	(read/write).
- *    PPAR      	Peripheral Pin Controller (PPC) Pin Assignment
- *              	Register (read/write).
- *    PSDR      	Peripheral Pin Controller (PPC) Sleep-mode pin
- *              	Direction Register (read/write).
- *    PPFR      	Peripheral Pin Controller (PPC) Pin Flag Register
- *              	(read).
- */
-
-#define PPDR		__REG(0x90060000)  /* PPC Pin Direction Reg.          */
-#define PPSR		__REG(0x90060004)  /* PPC Pin State Reg.              */
-#define PPAR		__REG(0x90060008)  /* PPC Pin Assignment Reg.         */
-#define PSDR		__REG(0x9006000C)  /* PPC Sleep-mode pin Direction Reg. */
-#define PPFR		__REG(0x90060010)  /* PPC Pin Flag Reg.               */
-
-#define PPC_LDD(Nb)	        	/* LCD Data [0..7]                 */ \
-                	(0x00000001 << (Nb))
-#define PPC_LDD0	PPC_LDD (0)	/* LCD Data [0]                    */
-#define PPC_LDD1	PPC_LDD (1)	/* LCD Data [1]                    */
-#define PPC_LDD2	PPC_LDD (2)	/* LCD Data [2]                    */
-#define PPC_LDD3	PPC_LDD (3)	/* LCD Data [3]                    */
-#define PPC_LDD4	PPC_LDD (4)	/* LCD Data [4]                    */
-#define PPC_LDD5	PPC_LDD (5)	/* LCD Data [5]                    */
-#define PPC_LDD6	PPC_LDD (6)	/* LCD Data [6]                    */
-#define PPC_LDD7	PPC_LDD (7)	/* LCD Data [7]                    */
-#define PPC_L_PCLK	0x00000100	/* LCD Pixel CLocK                 */
-#define PPC_L_LCLK	0x00000200	/* LCD Line CLocK                  */
-#define PPC_L_FCLK	0x00000400	/* LCD Frame CLocK                 */
-#define PPC_L_BIAS	0x00000800	/* LCD AC BIAS                     */
-                	        	/* ser. port 1:                    */
-#define PPC_TXD1	0x00001000	/*  SDLC/UART Transmit Data 1      */
-#define PPC_RXD1	0x00002000	/*  SDLC/UART Receive Data 1       */
-                	        	/* ser. port 2:                    */
-#define PPC_TXD2	0x00004000	/*  IPC Transmit Data 2            */
-#define PPC_RXD2	0x00008000	/*  IPC Receive Data 2             */
-                	        	/* ser. port 3:                    */
-#define PPC_TXD3	0x00010000	/*  UART Transmit Data 3           */
-#define PPC_RXD3	0x00020000	/*  UART Receive Data 3            */
-                	        	/* ser. port 4:                    */
-#define PPC_TXD4	0x00040000	/*  MCP/SSP Transmit Data 4        */
-#define PPC_RXD4	0x00080000	/*  MCP/SSP Receive Data 4         */
-#define PPC_SCLK	0x00100000	/*  MCP/SSP Sample CLocK           */
-#define PPC_SFRM	0x00200000	/*  MCP/SSP Sample FRaMe           */
-
-#define PPDR_In 	0       	/* Input                           */
-#define PPDR_Out	1       	/* Output                          */
-
-                	        	/* ser. port 1:                    */
-#define PPAR_UPR	0x00001000	/*  UART Pin Reassignment          */
-#define PPAR_UARTTR	(PPAR_UPR*0)	/*   UART on TXD_1 & RXD_1         */
-#define PPAR_UARTGPIO	(PPAR_UPR*1)	/*   UART on GPIO [14:15]          */
-                	        	/* ser. port 4:                    */
-#define PPAR_SPR	0x00040000	/*  SSP Pin Reassignment           */
-#define PPAR_SSPTRSS	(PPAR_SPR*0)	/*   SSP on TXD_C, RXD_C, SCLK_C,  */
-                	        	/*   & SFRM_C                      */
-#define PPAR_SSPGPIO	(PPAR_SPR*1)	/*   SSP on GPIO [10:13]           */
-
-#define PSDR_OutL	0       	/* Output Low in sleep mode        */
-#define PSDR_Flt	1       	/* Floating (input) in sleep mode  */
-
-#define PPFR_LCD	0x00000001	/* LCD controller                  */
-#define PPFR_SP1TX	0x00001000	/* Ser. Port 1 SDLC/UART Transmit  */
-#define PPFR_SP1RX	0x00002000	/* Ser. Port 1 SDLC/UART Receive   */
-#define PPFR_SP2TX	0x00004000	/* Ser. Port 2 ICP Transmit        */
-#define PPFR_SP2RX	0x00008000	/* Ser. Port 2 ICP Receive         */
-#define PPFR_SP3TX	0x00010000	/* Ser. Port 3 UART Transmit       */
-#define PPFR_SP3RX	0x00020000	/* Ser. Port 3 UART Receive        */
-#define PPFR_SP4	0x00040000	/* Ser. Port 4 MCP/SSP             */
-#define PPFR_PerEn	0       	/* Peripheral Enabled              */
-#define PPFR_PPCEn	1       	/* PPC Enabled                     */
-
-
-/*
- * Dynamic Random-Access Memory (DRAM) control registers
- *
- * Registers
- *    MDCNFG    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	CoNFiGuration register (read/write).
- *    MDCAS0    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	Column Address Strobe (CAS) shift register 0
- *              	(read/write).
- *    MDCAS1    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	Column Address Strobe (CAS) shift register 1
- *              	(read/write).
- *    MDCAS2    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	Column Address Strobe (CAS) shift register 2
- *              	(read/write).
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- *    fcas, Tcas	Frequency, period of the DRAM CAS shift registers.
- */
-
-#define MDCNFG		__REG(0xA0000000)  /*  DRAM CoNFiGuration reg. */
-#define MDCAS0		__REG(0xA0000004)  /* DRAM CAS shift reg. 0 */
-#define MDCAS1		__REG(0xA0000008)  /* DRAM CAS shift reg. 1 */
-#define MDCAS2		__REG(0xA000000c)  /* DRAM CAS shift reg. 2 */
-
-/* SA1100 MDCNFG values */
-#define MDCNFG_DE(Nb)	        	/* DRAM Enable bank [0..3]         */ \
-                	(0x00000001 << (Nb))
-#define MDCNFG_DE0	MDCNFG_DE (0)	/* DRAM Enable bank 0              */
-#define MDCNFG_DE1	MDCNFG_DE (1)	/* DRAM Enable bank 1              */
-#define MDCNFG_DE2	MDCNFG_DE (2)	/* DRAM Enable bank 2              */
-#define MDCNFG_DE3	MDCNFG_DE (3)	/* DRAM Enable bank 3              */
-#define MDCNFG_DRAC	Fld (2, 4)	/* DRAM Row Address Count - 9      */
-#define MDCNFG_RowAdd(Add)      	/*  Row Address count [9..12]      */ \
-                	(((Add) - 9) << FShft (MDCNFG_DRAC))
-#define MDCNFG_CDB2	0x00000040	/* shift reg. Clock Divide By 2    */
-                	        	/* (fcas = fcpu/2)                 */
-#define MDCNFG_TRP	Fld (4, 7)	/* Time RAS Pre-charge - 1 [Tmem]  */
-#define MDCNFG_PrChrg(Tcpu)     	/*  Pre-Charge time [2..32 Tcpu]   */ \
-                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_CeilPrChrg(Tcpu) 	/*  Ceil. of PrChrg [2..32 Tcpu]   */ \
-                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_TRASR	Fld (4, 11)	/* Time RAS Refresh - 1 [Tmem]     */
-#define MDCNFG_Ref(Tcpu)        	/*  Refresh time [2..32 Tcpu]      */ \
-                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_CeilRef(Tcpu)    	/*  Ceil. of Ref [2..32 Tcpu]      */ \
-                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_TDL	Fld (2, 15)	/* Time Data Latch [Tcpu]          */
-#define MDCNFG_DataLtch(Tcpu)   	/*  Data Latch delay [0..3 Tcpu]   */ \
-                	((Tcpu) << FShft (MDCNFG_TDL))
-#define MDCNFG_DRI	Fld (15, 17)	/* min. DRAM Refresh Interval/4    */
-                	        	/* [Tmem]                          */
-#define MDCNFG_RefInt(Tcpu)     	/*  min. Refresh Interval          */ \
-                	        	/*  [0..262136 Tcpu]               */ \
-                	((Tcpu)/8 << FShft (MDCNFG_DRI))
-
-/* SA1110 MDCNFG values */
-#define MDCNFG_SA1110_DE0	0x00000001	/* DRAM Enable bank 0        */
-#define MDCNFG_SA1110_DE1	0x00000002 	/* DRAM Enable bank 1        */
-#define MDCNFG_SA1110_DTIM0	0x00000004	/* DRAM timing type 0/1      */
-#define MDCNFG_SA1110_DWID0	0x00000008	/* DRAM bus width 0/1        */
-#define MDCNFG_SA1110_DRAC0	Fld(3, 4)	/* DRAM row addr bit count   */
-                	        		/* bank 0/1                  */
-#define MDCNFG_SA1110_CDB20	0x00000080	/* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP0	Fld(3, 8)	/* RAS precharge 0/1         */
-#define MDCNFG_SA1110_TDL0	Fld(2, 12)	/* Data input latch after CAS*/
-                	        		/* deassertion 0/1           */
-#define MDCNFG_SA1110_TWR0	Fld(2, 14)	/* SDRAM write recovery 0/1  */
-#define MDCNFG_SA1110_DE2	0x00010000	/* DRAM Enable bank 0        */
-#define MDCNFG_SA1110_DE3	0x00020000 	/* DRAM Enable bank 1        */
-#define MDCNFG_SA1110_DTIM2	0x00040000	/* DRAM timing type 0/1      */
-#define MDCNFG_SA1110_DWID2	0x00080000	/* DRAM bus width 0/1        */
-#define MDCNFG_SA1110_DRAC2	Fld(3, 20)	/* DRAM row addr bit count   */
-                	        		/* bank 0/1                  */
-#define MDCNFG_SA1110_CDB22	0x00800000	/* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP2	Fld(3, 24)	/* RAS precharge 0/1         */
-#define MDCNFG_SA1110_TDL2	Fld(2, 28)	/* Data input latch after CAS*/
-                	        		/* deassertion 0/1           */
-#define MDCNFG_SA1110_TWR2	Fld(2, 30)	/* SDRAM write recovery 0/1  */
-
-
-/*
- * Static memory control registers
- *
- * Registers
- *    MSC0      	Memory system: Static memory Control register 0
- *              	(read/write).
- *    MSC1      	Memory system: Static memory Control register 1
- *              	(read/write).
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- */
-
-#define MSC0		__REG(0xa0000010)  /* Static memory Control reg. 0 */
-#define MSC1		__REG(0xa0000014)  /* Static memory Control reg. 1 */
-#define MSC2		__REG(0xa000002c)  /* Static memory Control reg. 2, not contiguous   */
-
-#define MSC_Bnk(Nb)	        	/* static memory Bank [0..3]       */ \
-                	Fld (16, ((Nb) Modulo 2)*16)
-#define MSC0_Bnk0	MSC_Bnk (0)	/* static memory Bank 0            */
-#define MSC0_Bnk1	MSC_Bnk (1)	/* static memory Bank 1            */
-#define MSC1_Bnk2	MSC_Bnk (2)	/* static memory Bank 2            */
-#define MSC1_Bnk3	MSC_Bnk (3)	/* static memory Bank 3            */
-
-#define MSC_RT  	Fld (2, 0)	/* ROM/static memory Type          */
-#define MSC_NonBrst	        	/*  Non-Burst static memory        */ \
-                	(0 << FShft (MSC_RT))
-#define MSC_SRAM	        	/*  32-bit byte-writable SRAM      */ \
-                	(1 << FShft (MSC_RT))
-#define MSC_Brst4	        	/*  Burst-of-4 static memory       */ \
-                	(2 << FShft (MSC_RT))
-#define MSC_Brst8	        	/*  Burst-of-8 static memory       */ \
-                	(3 << FShft (MSC_RT))
-#define MSC_RBW 	0x0004  	/* ROM/static memory Bus Width     */
-#define MSC_32BitStMem	(MSC_RBW*0)	/*  32-Bit Static Memory           */
-#define MSC_16BitStMem	(MSC_RBW*1)	/*  16-Bit Static Memory           */
-#define MSC_RDF 	Fld (5, 3)	/* ROM/static memory read Delay    */
-                	        	/* First access - 1(.5) [Tmem]     */
-#define MSC_1stRdAcc(Tcpu)      	/*  1st Read Access time (burst    */ \
-                	        	/*  static memory) [3..65 Tcpu]    */ \
-                	((((Tcpu) - 3)/2) << FShft (MSC_RDF))
-#define MSC_Ceil1stRdAcc(Tcpu)  	/*  Ceil. of 1stRdAcc [3..65 Tcpu] */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_RdAcc(Tcpu)	        	/*  Read Access time (non-burst    */ \
-                	        	/*  static memory) [2..64 Tcpu]    */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_CeilRdAcc(Tcpu)     	/*  Ceil. of RdAcc [2..64 Tcpu]    */ \
-                	((((Tcpu) - 1)/2) << FShft (MSC_RDF))
-#define MSC_RDN 	Fld (5, 8)	/* ROM/static memory read Delay    */
-                	        	/* Next access - 1 [Tmem]          */
-#define MSC_NxtRdAcc(Tcpu)      	/*  Next Read Access time (burst   */ \
-                	        	/*  static memory) [2..64 Tcpu]    */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilNxtRdAcc(Tcpu)  	/*  Ceil. of NxtRdAcc [2..64 Tcpu] */ \
-                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_WrAcc(Tcpu)	        	/*  Write Access time (non-burst   */ \
-                	        	/*  static memory) [2..64 Tcpu]    */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilWrAcc(Tcpu)     	/*  Ceil. of WrAcc [2..64 Tcpu]    */ \
-                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_RRR 	Fld (3, 13)	/* ROM/static memory RecoveRy      */
-                	        	/* time/2 [Tmem]                   */
-#define MSC_Rec(Tcpu)	        	/*  Recovery time [0..28 Tcpu]     */ \
-                	(((Tcpu)/4) << FShft (MSC_RRR))
-#define MSC_CeilRec(Tcpu)       	/*  Ceil. of Rec [0..28 Tcpu]      */ \
-                	((((Tcpu) + 3)/4) << FShft (MSC_RRR))
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) control
- * register
- *
- * Register
- *    MECR      	Memory system: Expansion memory bus (PCMCIA)
- *              	Configuration Register (read/write).
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- *    fbclk, Tbclk	Frequency, period of the PCMCIA clock (BCLK).
- */
-
-                	        	/* Memory system:                  */
-#define MECR		__REG(0xA0000018)  /*  Expansion memory bus (PCMCIA) Configuration Reg.             */
-
-#define MECR_PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	Fld (15, (Nb)*16)
-#define MECR_PCMCIA0	MECR_PCMCIA (0)	/* PCMCIA 0                        */
-#define MECR_PCMCIA1	MECR_PCMCIA (1)	/* PCMCIA 1                        */
-
-#define MECR_BSIO	Fld (5, 0)	/* BCLK Select I/O - 1 [Tmem]      */
-#define MECR_IOClk(Tcpu)        	/*  I/O Clock [2..64 Tcpu]         */ \
-                	((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
-#define MECR_CeilIOClk(Tcpu)    	/*  Ceil. of IOClk [2..64 Tcpu]    */ \
-                	((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
-#define MECR_BSA	Fld (5, 5)	/* BCLK Select Attribute - 1       */
-                	        	/* [Tmem]                          */
-#define MECR_AttrClk(Tcpu)      	/*  Attribute Clock [2..64 Tcpu]   */ \
-                	((((Tcpu) - 2)/2) << FShft (MECR_BSA))
-#define MECR_CeilAttrClk(Tcpu)  	/*  Ceil. of AttrClk [2..64 Tcpu]  */ \
-                	((((Tcpu) - 1)/2) << FShft (MECR_BSA))
-#define MECR_BSM	Fld (5, 10)	/* BCLK Select Memory - 1 [Tmem]   */
-#define MECR_MemClk(Tcpu)       	/*  Memory Clock [2..64 Tcpu]      */ \
-                	((((Tcpu) - 2)/2) << FShft (MECR_BSM))
-#define MECR_CeilMemClk(Tcpu)   	/*  Ceil. of MemClk [2..64 Tcpu]   */ \
-                	((((Tcpu) - 1)/2) << FShft (MECR_BSM))
-
-/*
- * On SA1110 only
- */
-
-#define MDREFR		__REG(0xA000001C)
-
-#define MDREFR_TRASR		Fld (4, 0)
-#define MDREFR_DRI		Fld (12, 4)
-#define MDREFR_E0PIN		(1 << 16)
-#define MDREFR_K0RUN		(1 << 17)
-#define MDREFR_K0DB2		(1 << 18)
-#define MDREFR_E1PIN		(1 << 20)
-#define MDREFR_K1RUN		(1 << 21)
-#define MDREFR_K1DB2		(1 << 22)
-#define MDREFR_K2RUN		(1 << 25)
-#define MDREFR_K2DB2		(1 << 26)
-#define MDREFR_EAPD		(1 << 28)
-#define MDREFR_KAPD		(1 << 29)
-#define MDREFR_SLFRSH		(1 << 31)
-
-
-/*
- * Direct Memory Access (DMA) control registers
- *
- * Registers
- *    DDAR0     	Direct Memory Access (DMA) Device Address Register
- *              	channel 0 (read/write).
- *    DCSR0     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 0 (read/write).
- *    DBSA0     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 0 (read/write).
- *    DBTA0     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 0 (read/write).
- *    DBSB0     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 0 (read/write).
- *    DBTB0     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 0 (read/write).
- *
- *    DDAR1     	Direct Memory Access (DMA) Device Address Register
- *              	channel 1 (read/write).
- *    DCSR1     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 1 (read/write).
- *    DBSA1     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 1 (read/write).
- *    DBTA1     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 1 (read/write).
- *    DBSB1     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 1 (read/write).
- *    DBTB1     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 1 (read/write).
- *
- *    DDAR2     	Direct Memory Access (DMA) Device Address Register
- *              	channel 2 (read/write).
- *    DCSR2     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 2 (read/write).
- *    DBSA2     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 2 (read/write).
- *    DBTA2     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 2 (read/write).
- *    DBSB2     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 2 (read/write).
- *    DBTB2     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 2 (read/write).
- *
- *    DDAR3     	Direct Memory Access (DMA) Device Address Register
- *              	channel 3 (read/write).
- *    DCSR3     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 3 (read/write).
- *    DBSA3     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 3 (read/write).
- *    DBTA3     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 3 (read/write).
- *    DBSB3     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 3 (read/write).
- *    DBTB3     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 3 (read/write).
- *
- *    DDAR4     	Direct Memory Access (DMA) Device Address Register
- *              	channel 4 (read/write).
- *    DCSR4     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 4 (read/write).
- *    DBSA4     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 4 (read/write).
- *    DBTA4     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 4 (read/write).
- *    DBSB4     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 4 (read/write).
- *    DBTB4     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 4 (read/write).
- *
- *    DDAR5     	Direct Memory Access (DMA) Device Address Register
- *              	channel 5 (read/write).
- *    DCSR5     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 5 (read/write).
- *    DBSA5     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 5 (read/write).
- *    DBTA5     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 5 (read/write).
- *    DBSB5     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 5 (read/write).
- *    DBTB5     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 5 (read/write).
- */
-
-#define DMASp   	0x00000020	/* DMA control reg. Space [byte]   */
-
-#define DDAR(Nb)	__REG(0xB0000000 + (Nb)*DMASp)  /* DMA Device Address Reg. channel [0..5] */
-#define SetDCSR(Nb)	__REG(0xB0000004 + (Nb)*DMASp)  /* Set DMA Control & Status Reg. channel [0..5] (write) */
-#define ClrDCSR(Nb)	__REG(0xB0000008 + (Nb)*DMASp)  /* Clear DMA Control & Status Reg. channel [0..5] (write) */
-#define RdDCSR(Nb)	__REG(0xB000000C + (Nb)*DMASp)  /* Read DMA Control & Status Reg. channel [0..5] (read) */
-#define DBSA(Nb)	__REG(0xB0000010 + (Nb)*DMASp)  /* DMA Buffer Start address reg. A channel [0..5] */
-#define DBTA(Nb)	__REG(0xB0000014 + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. A channel [0..5] */
-#define DBSB(Nb)	__REG(0xB0000018 + (Nb)*DMASp)  /* DMA Buffer Start address reg. B channel [0..5] */
-#define DBTB(Nb)	__REG(0xB000001C + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. B channel [0..5] */
-
-#define DDAR_RW 	0x00000001	/* device data Read/Write          */
-#define DDAR_DevWr	(DDAR_RW*0)	/*  Device data Write              */
-                	        	/*  (memory -> device)             */
-#define DDAR_DevRd	(DDAR_RW*1)	/*  Device data Read               */
-                	        	/*  (device -> memory)             */
-#define DDAR_E  	0x00000002	/* big/little Endian device        */
-#define DDAR_LtlEnd	(DDAR_E*0)	/*  Little Endian device           */
-#define DDAR_BigEnd	(DDAR_E*1)	/*  Big Endian device              */
-#define DDAR_BS 	0x00000004	/* device Burst Size               */
-#define DDAR_Brst4	(DDAR_BS*0)	/*  Burst-of-4 device              */
-#define DDAR_Brst8	(DDAR_BS*1)	/*  Burst-of-8 device              */
-#define DDAR_DW 	0x00000008	/* device Data Width               */
-#define DDAR_8BitDev	(DDAR_DW*0)	/*  8-Bit Device                   */
-#define DDAR_16BitDev	(DDAR_DW*1)	/*  16-Bit Device                  */
-#define DDAR_DS 	Fld (4, 4)	/* Device Select                   */
-#define DDAR_Ser0UDCTr	        	/*  Ser. port 0 UDC Transmit       */ \
-                	(0x0 << FShft (DDAR_DS))
-#define DDAR_Ser0UDCRc	        	/*  Ser. port 0 UDC Receive        */ \
-                	(0x1 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCTr	        	/*  Ser. port 1 SDLC Transmit      */ \
-                	(0x2 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCRc	        	/*  Ser. port 1 SDLC Receive       */ \
-                	(0x3 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTTr	        	/*  Ser. port 1 UART Transmit      */ \
-                	(0x4 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTRc	        	/*  Ser. port 1 UART Receive       */ \
-                	(0x5 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPTr	        	/*  Ser. port 2 ICP Transmit       */ \
-                	(0x6 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPRc	        	/*  Ser. port 2 ICP Receive        */ \
-                	(0x7 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTTr	        	/*  Ser. port 3 UART Transmit      */ \
-                	(0x8 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTRc	        	/*  Ser. port 3 UART Receive       */ \
-                	(0x9 << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Tr	        	/*  Ser. port 4 MCP 0 Transmit     */ \
-                	        	/*  (audio)                        */ \
-                	(0xA << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Rc	        	/*  Ser. port 4 MCP 0 Receive      */ \
-                	        	/*  (audio)                        */ \
-                	(0xB << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Tr	        	/*  Ser. port 4 MCP 1 Transmit     */ \
-                	        	/*  (telecom)                      */ \
-                	(0xC << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Rc	        	/*  Ser. port 4 MCP 1 Receive      */ \
-                	        	/*  (telecom)                      */ \
-                	(0xD << FShft (DDAR_DS))
-#define DDAR_Ser4SSPTr	        	/*  Ser. port 4 SSP Transmit       */ \
-                	(0xE << FShft (DDAR_DS))
-#define DDAR_Ser4SSPRc	        	/*  Ser. port 4 SSP Receive        */ \
-                	(0xF << FShft (DDAR_DS))
-#define DDAR_DA 	Fld (24, 8)	/* Device Address                  */
-#define DDAR_DevAdd(Add)        	/*  Device Address                 */ \
-                	(((Add) & 0xF0000000) | \
-                	 (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
-#define DDAR_Ser0UDCWr	        	/* Ser. port 0 UDC Write           */ \
-                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser0UDCRd	        	/* Ser. port 0 UDC Read            */ \
-                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser1UARTWr	        	/* Ser. port 1 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1UARTRd	        	/* Ser. port 1 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1SDLCWr	        	/* Ser. port 1 SDLC Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser1SDLCRd	        	/* Ser. port 1 SDLC Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser2UARTWr	        	/* Ser. port 2 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2UARTRd	        	/* Ser. port 2 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2HSSPWr	        	/* Ser. port 2 HSSP Write          */ \
-                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser2HSSPRd	        	/* Ser. port 2 HSSP Read           */ \
-                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser3UARTWr	        	/* Ser. port 3 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser3UARTRd	        	/* Ser. port 3 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser4MCP0Wr	        	/* Ser. port 4 MCP 0 Write (audio) */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP0Rd	        	/* Ser. port 4 MCP 0 Read (audio)  */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP1Wr	        	/* Ser. port 4 MCP 1 Write         */ \
-                	        	/* (telecom)                       */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4MCP1Rd	        	/* Ser. port 4 MCP 1 Read          */ \
-                	        	/* (telecom)                       */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4SSPWr	        	/* Ser. port 4 SSP Write (16 bits) */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
-#define DDAR_Ser4SSPRd	        	/* Ser. port 4 SSP Read (16 bits)  */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
-
-#define DCSR_RUN	0x00000001	/* DMA RUNing                      */
-#define DCSR_IE 	0x00000002	/* DMA Interrupt Enable            */
-#define DCSR_ERROR	0x00000004	/* DMA ERROR                       */
-#define DCSR_DONEA	0x00000008	/* DONE DMA transfer buffer A      */
-#define DCSR_STRTA	0x00000010	/* STaRTed DMA transfer buffer A   */
-#define DCSR_DONEB	0x00000020	/* DONE DMA transfer buffer B      */
-#define DCSR_STRTB	0x00000040	/* STaRTed DMA transfer buffer B   */
-#define DCSR_BIU	0x00000080	/* DMA Buffer In Use               */
-#define DCSR_BufA	(DCSR_BIU*0)	/*  DMA Buffer A in use            */
-#define DCSR_BufB	(DCSR_BIU*1)	/*  DMA Buffer B in use            */
-
-#define DBT_TC  	Fld (13, 0)	/* Transfer Count                  */
-#define DBTA_TCA	DBT_TC  	/* Transfer Count buffer A         */
-#define DBTB_TCB	DBT_TC  	/* Transfer Count buffer B         */
-
-
-/*
- * Liquid Crystal Display (LCD) control registers
- *
- * Registers
- *    LCCR0     	Liquid Crystal Display (LCD) Control Register 0
- *              	(read/write).
- *              	[Bits LDM, BAM, and ERM are only implemented in
- *              	versions 2.0 (rev. = 8) and higher of the StrongARM
- *              	SA-1100.]
- *    LCSR      	Liquid Crystal Display (LCD) Status Register
- *              	(read/write).
- *              	[Bit LDD can be only read in versions 1.0 (rev. = 1)
- *              	and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
- *              	read and written (cleared) in versions 2.0 (rev. = 8)
- *              	and higher.]
- *    DBAR1     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Base Address Register channel 1 (read/write).
- *    DCAR1     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Current Address Register channel 1 (read).
- *    DBAR2     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Base Address Register channel 2 (read/write).
- *    DCAR2     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Current Address Register channel 2 (read).
- *    LCCR1     	Liquid Crystal Display (LCD) Control Register 1
- *              	(read/write).
- *              	[The LCCR1 register can be only written in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it can be written and read in
- *              	versions 2.0 (rev. = 8) and higher.]
- *    LCCR2     	Liquid Crystal Display (LCD) Control Register 2
- *              	(read/write).
- *              	[The LCCR1 register can be only written in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it can be written and read in
- *              	versions 2.0 (rev. = 8) and higher.]
- *    LCCR3     	Liquid Crystal Display (LCD) Control Register 3
- *              	(read/write).
- *              	[The LCCR1 register can be only written in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it can be written and read in
- *              	versions 2.0 (rev. = 8) and higher. Bit PCP is only
- *              	implemented in versions 2.0 (rev. = 8) and higher of
- *              	the StrongARM SA-1100.]
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- *    fpix, Tpix	Frequency, period of the pixel clock.
- *    fln, Tln  	Frequency, period of the line clock.
- *    fac, Tac  	Frequency, period of the AC bias clock.
- */
-
-#define LCD_PEntrySp	2       	/* LCD Palette Entry Space [byte]  */
-#define LCD_4BitPSp	        	/* LCD 4-Bit pixel Palette Space   */ \
-                	        	/* [byte]                          */ \
-                	(16*LCD_PEntrySp)
-#define LCD_8BitPSp	        	/* LCD 8-Bit pixel Palette Space   */ \
-                	        	/* [byte]                          */ \
-                	(256*LCD_PEntrySp)
-#define LCD_12_16BitPSp	        	/* LCD 12/16-Bit pixel             */ \
-                	        	/* dummy-Palette Space [byte]      */ \
-                	(16*LCD_PEntrySp)
-
-#define LCD_PGrey	Fld (4, 0)	/* LCD Palette entry Grey value    */
-#define LCD_PBlue	Fld (4, 0)	/* LCD Palette entry Blue value    */
-#define LCD_PGreen	Fld (4, 4)	/* LCD Palette entry Green value   */
-#define LCD_PRed	Fld (4, 8)	/* LCD Palette entry Red value     */
-#define LCD_PBS 	Fld (2, 12)	/* LCD Pixel Bit Size              */
-#define LCD_4Bit	        	/*  LCD 4-Bit pixel mode           */ \
-                	(0 << FShft (LCD_PBS))
-#define LCD_8Bit	        	/*  LCD 8-Bit pixel mode           */ \
-                	(1 << FShft (LCD_PBS))
-#define LCD_12_16Bit	        	/*  LCD 12/16-Bit pixel mode       */ \
-                	(2 << FShft (LCD_PBS))
-
-#define LCD_Int0_0	0x0     	/* LCD Intensity =   0.0% =  0     */
-#define LCD_Int11_1	0x1     	/* LCD Intensity =  11.1% =  1/9   */
-#define LCD_Int20_0	0x2     	/* LCD Intensity =  20.0% =  1/5   */
-#define LCD_Int26_7	0x3     	/* LCD Intensity =  26.7% =  4/15  */
-#define LCD_Int33_3	0x4     	/* LCD Intensity =  33.3% =  3/9   */
-#define LCD_Int40_0	0x5     	/* LCD Intensity =  40.0% =  2/5   */
-#define LCD_Int44_4	0x6     	/* LCD Intensity =  44.4% =  4/9   */
-#define LCD_Int50_0	0x7     	/* LCD Intensity =  50.0% =  1/2   */
-#define LCD_Int55_6	0x8     	/* LCD Intensity =  55.6% =  5/9   */
-#define LCD_Int60_0	0x9     	/* LCD Intensity =  60.0% =  3/5   */
-#define LCD_Int66_7	0xA     	/* LCD Intensity =  66.7% =  6/9   */
-#define LCD_Int73_3	0xB     	/* LCD Intensity =  73.3% = 11/15  */
-#define LCD_Int80_0	0xC     	/* LCD Intensity =  80.0% =  4/5   */
-#define LCD_Int88_9	0xD     	/* LCD Intensity =  88.9% =  8/9   */
-#define LCD_Int100_0	0xE     	/* LCD Intensity = 100.0% =  1     */
-#define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
-                	        	/* (Alternative)                   */
-
-#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
-#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
-#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
-#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
-#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
-#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
-#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
-#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
-#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
-
-#define LCCR0_LEN	0x00000001	/* LCD ENable                      */
-#define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display             */
-#define LCCR0_SDS	0x00000004	/* Single/Dual panel display       */
-                	        	/* Select                          */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display           */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display             */
-#define LCCR0_LDM	0x00000008	/* LCD Disable done (LDD)          */
-                	        	/* interrupt Mask (disable)        */
-#define LCCR0_BAM	0x00000010	/* Base Address update (BAU)       */
-                	        	/* interrupt Mask (disable)        */
-#define LCCR0_ERM	0x00000020	/* LCD ERror (BER, IOL, IUL, IOU,  */
-                	        	/* IUU, OOL, OUL, OOU, and OUU)    */
-                	        	/* interrupt Mask (disable)        */
-#define LCCR0_PAS	0x00000080	/* Passive/Active display Select   */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN)          */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT)           */
-#define LCCR0_BLE	0x00000100	/* Big/Little Endian select        */
-#define LCCR0_LtlEnd	(LCCR0_BLE*0)	/*  Little Endian frame buffer     */
-#define LCCR0_BigEnd	(LCCR0_BLE*1)	/*  Big Endian frame buffer        */
-#define LCCR0_DPD	0x00000200	/* Double Pixel Data (monochrome   */
-                	        	/* display mode)                   */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome       */
-                	        	/*  display                        */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome       */
-                	        	/*  display                        */
-#define LCCR0_PDD	Fld (8, 12)	/* Palette DMA request Delay       */
-                	        	/* [Tmem]                          */
-#define LCCR0_DMADel(Tcpu)      	/*  palette DMA request Delay      */ \
-                	        	/*  [0..510 Tcpu]                  */ \
-                	((Tcpu)/2 << FShft (LCCR0_PDD))
-
-#define LCSR_LDD	0x00000001	/* LCD Disable Done                */
-#define LCSR_BAU	0x00000002	/* Base Address Update (read)      */
-#define LCSR_BER	0x00000004	/* Bus ERror                       */
-#define LCSR_ABC	0x00000008	/* AC Bias clock Count             */
-#define LCSR_IOL	0x00000010	/* Input FIFO Over-run Lower       */
-                	        	/* panel                           */
-#define LCSR_IUL	0x00000020	/* Input FIFO Under-run Lower      */
-                	        	/* panel                           */
-#define LCSR_IOU	0x00000040	/* Input FIFO Over-run Upper       */
-                	        	/* panel                           */
-#define LCSR_IUU	0x00000080	/* Input FIFO Under-run Upper      */
-                	        	/* panel                           */
-#define LCSR_OOL	0x00000100	/* Output FIFO Over-run Lower      */
-                	        	/* panel                           */
-#define LCSR_OUL	0x00000200	/* Output FIFO Under-run Lower     */
-                	        	/* panel                           */
-#define LCSR_OOU	0x00000400	/* Output FIFO Over-run Upper      */
-                	        	/* panel                           */
-#define LCSR_OUU	0x00000800	/* Output FIFO Under-run Upper     */
-                	        	/* panel                           */
-
-#define LCCR1_PPL	Fld (6, 4)	/* Pixels Per Line/16 - 1          */
-#define LCCR1_DisWdth(Pixel)    	/*  Display Width [16..1024 pix.]  */ \
-                	(((Pixel) - 16)/16 << FShft (LCCR1_PPL))
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization      */
-                	        	/* pulse Width - 1 [Tpix] (L_LCLK) */
-#define LCCR1_HorSnchWdth(Tpix) 	/*  Horizontal Synchronization     */ \
-                	        	/*  pulse Width [1..64 Tpix]       */ \
-                	(((Tpix) - 1) << FShft (LCCR1_HSW))
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait    */
-                	        	/* count - 1 [Tpix]                */
-#define LCCR1_EndLnDel(Tpix)    	/*  End-of-Line Delay              */ \
-                	        	/*  [1..256 Tpix]                  */ \
-                	(((Tpix) - 1) << FShft (LCCR1_ELW))
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock   */
-                	        	/* Wait count - 1 [Tpix]           */
-#define LCCR1_BegLnDel(Tpix)    	/*  Beginning-of-Line Delay        */ \
-                	        	/*  [1..256 Tpix]                  */ \
-                	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1              */
-#define LCCR2_DisHght(Line)     	/*  Display Height [1..1024 lines] */ \
-                	(((Line) - 1) << FShft (LCCR2_LPP))
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse  */
-                	        	/* Width - 1 [Tln] (L_FCLK)        */
-#define LCCR2_VrtSnchWdth(Tln)  	/*  Vertical Synchronization pulse */ \
-                	        	/*  Width [1..64 Tln]              */ \
-                	(((Tln) - 1) << FShft (LCCR2_VSW))
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait    */
-                	        	/* count [Tln]                     */
-#define LCCR2_EndFrmDel(Tln)    	/*  End-of-Frame Delay             */ \
-                	        	/*  [0..255 Tln]                   */ \
-                	((Tln) << FShft (LCCR2_EFW))
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock   */
-                	        	/* Wait count [Tln]                */
-#define LCCR2_BegFrmDel(Tln)    	/*  Beginning-of-Frame Delay       */ \
-                	        	/*  [0..255 Tln]                   */ \
-                	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor/2 - 2       */
-                	        	/* [1..255] (L_PCLK)               */
-                	        	/* fpix = fcpu/(2*(PCD + 2))       */
-                	        	/* Tpix = 2*(PCD + 2)*Tcpu         */
-#define LCCR3_PixClkDiv(Div)    	/*  Pixel Clock Divisor [6..514]   */ \
-                	(((Div) - 4)/2 << FShft (LCCR3_PCD))
-                	        	/*  fpix = fcpu/(2*Floor (Div/2))  */
-                	        	/*  Tpix = 2*Floor (Div/2)*Tcpu    */
-#define LCCR3_CeilPixClkDiv(Div)	/*  Ceil. of PixClkDiv [6..514]    */ \
-                	(((Div) - 3)/2 << FShft (LCCR3_PCD))
-                	        	/*  fpix = fcpu/(2*Ceil (Div/2))   */
-                	        	/*  Tpix = 2*Ceil (Div/2)*Tcpu     */
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias clock half period - 1   */
-                	        	/* [Tln] (L_BIAS)                  */
-#define LCCR3_ACBsDiv(Div)      	/*  AC Bias clock Divisor [2..512] */ \
-                	(((Div) - 2)/2 << FShft (LCCR3_ACB))
-                	        	/*  fac = fln/(2*Floor (Div/2))    */
-                	        	/*  Tac = 2*Floor (Div/2)*Tln      */
-#define LCCR3_CeilACBsDiv(Div)  	/*  Ceil. of ACBsDiv [2..512]      */ \
-                	(((Div) - 1)/2 << FShft (LCCR3_ACB))
-                	        	/*  fac = fln/(2*Ceil (Div/2))     */
-                	        	/*  Tac = 2*Ceil (Div/2)*Tln       */
-#define LCCR3_API	Fld (4, 16)	/* AC bias Pin transitions per     */
-                	        	/* Interrupt                       */
-#define LCCR3_ACBsCntOff        	/*  AC Bias clock transition Count */ \
-                	        	/*  Off                            */ \
-                	(0 << FShft (LCCR3_API))
-#define LCCR3_ACBsCnt(Trans)    	/*  AC Bias clock transition Count */ \
-                	        	/*  [1..15]                        */ \
-                	((Trans) << FShft (LCCR3_API))
-#define LCCR3_VSP	0x00100000	/* Vertical Synchronization pulse  */
-                	        	/* Polarity (L_FCLK)               */
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  Vertical Synchronization pulse */
-                	        	/*  active High                    */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  Vertical Synchronization pulse */
-                	        	/*  active Low                     */
-#define LCCR3_HSP	0x00200000	/* Horizontal Synchronization      */
-                	        	/* pulse Polarity (L_LCLK)         */
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  Horizontal Synchronization     */
-                	        	/*  pulse active High              */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  Horizontal Synchronization     */
-                	        	/*  pulse active Low               */
-#define LCCR3_PCP	0x00400000	/* Pixel Clock Polarity (L_PCLK)   */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge        */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge       */
-#define LCCR3_OEP	0x00800000	/* Output Enable Polarity (L_BIAS, */
-                	        	/* active display mode)            */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High      */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low       */
-
-#ifndef __ASSEMBLY__
-extern unsigned int processor_id;
-#endif
-
-#define CPU_REVISION	(processor_id & 15)
-#define CPU_SA1110_A0	(0)
-#define CPU_SA1110_B0	(4)
-#define CPU_SA1110_B1	(5)
-#define CPU_SA1110_B2	(6)
-#define CPU_SA1110_B4	(8)
-
-#define CPU_SA1100_ID	(0x4401a110)
-#define CPU_SA1100_MASK	(0xfffffff0)
-#define CPU_SA1110_ID	(0x6901b110)
-#define CPU_SA1110_MASK	(0xfffffff0)
diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/include/asm-arm/arch-sa1100/SA-1101.h
deleted file mode 100644
index 65ca8c79e6d2..000000000000
--- a/include/asm-arm/arch-sa1100/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-#  define LANGUAGE Assembly
-# else
-#  define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd)  (PhAdd)
-#endif
-
-#include <asm/arch/bitfield.h>
-
-#define C               0
-#define Assembly        1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0	0x00000000
-#define __SYSTEM_CONTROL1	0x00000400
-#define __ARBITER		0x00020000
-#define __SYSTEM_CONTROL2	0x00040000
-#define __SYSTEM_CONTROL3	0x00060000
-#define __PARALLEL_PORT		0x00080000
-#define __VIDMEM_CONTROL	0x00100000
-#define __UPDATE_FIFO		0x00120000
-#define __SHMEM_CONTROL1	0x00140000
-#define __INTERRUPT_CONTROL	0x00160000
-#define __USB_CONTROL		0x00180000
-#define __TRACK_INTERFACE	0x001a0000
-#define __MOUSE_INTERFACE	0x001b0000
-#define __KEYPAD_INTERFACE	0x001c0000
-#define __PCMCIA_INTERFACE	0x001e0000
-#define	__VGA_CONTROL		0x00200000
-#define __GPIO_INTERFACE	0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x )    ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- *	SKCR		SA-1101 control register (read/write)
- *	SMCR		Shared Memory Controller Register
- *	SNPR		Snoop Register
- */
-
-#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
-#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
-#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
-#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
-#define SKCR_VCOON	  0x0010	  /* VCO bias */
-#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
-#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
-
-#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
-#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
-#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
-#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
-	(( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
-	(( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
-#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
-#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
-#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
-#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
-	( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
-	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- *    VMCCR	Configuration register
- *    VMCAR	VMC address register
- *    VMCDR	VMC data register
- *
- */
-
-#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
-#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
-#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
-#define VMCCR_Config	    0x0001	  /* DRAM size */
-#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
-#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
-#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
-#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
-#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
-#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
-#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- *    UFCR	Update FIFO Control Register
- *    UFSR	Update FIFO Status Register
- *    UFLVLR	update FIFO level register
- *    UFDR	update FIFO data register
- */
-
-#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
-#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
-#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
-#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
-#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- *    SKPCR	Power Control Register
- *    SKCDR	Clock Divider Register
- *    DACDR1	DAC1 Data register
- *    DACDR2	DAC2 Data register
- */
-
-#define _SKPCR		_SA1101(0x00000400)
-#define _SKCDR		_SA1101(0x00040000)
-#define _DACDR1		_SA1101(0x00060000)
-#define _DACDR2		_SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn	     0x01    /* USB Enable */
-#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
-#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
-#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
-#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
-#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
-
-#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
-#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
-#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
-#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
-#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
-#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
-#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
-#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
-#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
-#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
-#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
-
-#define DACDR_DACCount	     Fld(8,0)	/* Count value */
-#define DACDR1_DACCount	     DACDR_DACCount
-#define DACDR2_DACCount	     DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- *    IEEE_Config	IEEE mode selection and programmable attributes
- *    IEEE_Control	Controls the states of IEEE port control outputs
- *    IEEE_Data		Forward transfer data register
- *    IEEE_Addr		Forward transfer address register
- *    IEEE_Status	Port IO signal status register
- *    IEEE_IntStatus	Port interrupts status register
- *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
- *    IEEE_InitTime	Forward timeout counter initial value
- *    IEEE_TimerStatus	Forward timeout counter current value
- *    IEEE_FifoReset	Reset forward transfer FIFO
- *    IEEE_ReloadValue	Counter reload value
- *    IEEE_TestControl	Control testmode
- *    IEEE_TestDataIn	Test data register
- *    IEEE_TestDataInEn	Enable test data
- *    IEEE_TestCtrlIn	Test control signals
- *    IEEE_TestCtrlInEn	Enable test control signals
- *    IEEE_TestDataStat	Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address 
- */
- 
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config	    _IEEE( 0x0000 )
-#define _IEEE_Control	    _IEEE( 0x0400 )
-#define _IEEE_Data	    _IEEE( 0x4000 )
-#define _IEEE_Addr	    _IEEE( 0x0800 )
-#define _IEEE_Status	    _IEEE( 0x0c00 )
-#define _IEEE_IntStatus	    _IEEE( 0x1000 )
-#define _IEEE_FifoLevels    _IEEE( 0x1400 )
-#define _IEEE_InitTime	    _IEEE( 0x1800 )
-#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
-#define _IEEE_FifoReset	    _IEEE( 0x2000 )
-#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
-#define _IEEE_TestControl   _IEEE( 0x2400 )
-#define _IEEE_TestDataIn    _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
-#define _IEEE_TestDataStat  _IEEE( 0x3800 )
- 
-
-#if LANGUAGE == C
-#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
-#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
-#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
-#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
-#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
-#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
-#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
-#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
-#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
-#define IEEE_Config_D	    0x04	 /* FIFO access enable */
-#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
-#define IEEE_Config_T	    0x10	 /* Data transfer enable */
-#define IEEE_Config_A	    0x20	 /* Data transfer direction */
-#define IEEE_Config_E	    0x40	 /* Timer enable */
-#define IEEE_Control_A	    0x08	 /* AutoFd output */
-#define IEEE_Control_E	    0x04	 /* Selectin output */
-#define IEEE_Control_T	    0x02	 /* Strobe output */
-#define IEEE_Control_I	    0x01	 /* Port init output */
-#define IEEE_Data_C	    (1<<31)	 /* Byte count */
-#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
-#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
-#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
-#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
-#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
-#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
-#define IEEE_Status_I	    0x0020	 /* nInit port output status */
-#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
-#define IEEE_Status_S	    0x0008	 /* Select port input status */
-#define IEEE_Status_K	    0x0004	 /* nAck port input status */
-#define IEEE_Status_F	    0x0002	 /* nFault port input status */
-#define IEEE_Status_R	    0x0001	 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat	 0x0100
-#define IEEE_IntStatus_IntReqEmp	 0x0080
-#define IEEE_IntStatus_IntReqInt	 0x0040
-#define IEEE_IntStatus_IntReqRav	 0x0020
-#define IEEE_IntStatus_IntReqTim	 0x0010
-#define IEEE_IntStatus_RevAddrComp	 0x0008
-#define IEEE_IntStatus_RevDataComp	 0x0004
-#define IEEE_IntStatus_FwdAddrComp	 0x0002
-#define IEEE_IntStatus_FwdDataComp	 0x0001
-#define IEEE_FifoLevels_RevFifoLevel	 2
-#define IEEE_FifoLevels_FwdFifoLevel	 1
-#define IEEE_InitTime_TimValInit	 Fld(22,0)
-#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
-#define IEEE_ReloadValue_Reload		 Fld(4,0)
-
-#define IEEE_TestControl_RegClk		 0x04
-#define IEEE_TestControl_ClockSelect	 Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError		 0x10
-#define IEEE_TestCtrlIn_nFault		 0x08
-#define IEEE_TestCtrlIn_nAck		 0x04
-#define IEEE_TestCtrlIn_PSel		 0x02
-#define IEEE_TestCtrlIn_Busy		 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- *    VideoControl	Video Control Register
- *    VgaTiming0	VGA Timing Register 0
- *    VgaTiming1	VGA Timing Register 1
- *    VgaTiming2	VGA Timing Register 2
- *    VgaTiming3	VGA Timing Register 3
- *    VgaBorder		VGA Border Color Register
- *    VgaDBAR		VGADMA Base Address Register
- *    VgaDCAR		VGADMA Channel Current Address Register
- *    VgaStatus		VGA Status Register
- *    VgaInterruptMask	VGA Interrupt Mask Register
- *    VgaPalette	VGA Palette Registers
- *    DacControl	DAC Control Register
- *    VgaTest		VGA Controller Test Register
- */
-
-#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl	    _VGA( 0x0000 )
-#define _VgaTiming0	    _VGA( 0x0400 )
-#define _VgaTiming1	    _VGA( 0x0800 )
-#define _VgaTiming2	    _VGA( 0x0c00 )
-#define _VgaTiming3	    _VGA( 0x1000 )
-#define _VgaBorder	    _VGA( 0x1400 )
-#define _VgaDBAR	    _VGA( 0x1800 )
-#define _VgaDCAR	    _VGA( 0x1c00 )
-#define _VgaStatus	    _VGA( 0x2000 )
-#define _VgaInterruptMask   _VGA( 0x2400 )
-#define _VgaPalette	    _VGA( 0x40000 )
-#define _DacControl	    _VGA( 0x3000 )
-#define _VgaTest	    _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
-#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn    0x00000000
-#define VideoControl_BGR      0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq   Fld(4,4)
-#define VideoControl_VBurstL  Fld(4,8)
-#define VideoControl_VMode    (1<<12)
-#define VideoControl_PalRead  (1<<13)
-
-#define VgaTiming0_PPL	      Fld(6,2)
-#define VgaTiming0_HSW	      Fld(8,8)
-#define VgaTiming0_HFP	      Fld(8,16)
-#define VgaTiming0_HBP	      Fld(8,24)
-
-#define VgaTiming1_LPS	      Fld(10,0)
-#define VgaTiming1_VSW	      Fld(6,10)
-#define VgaTiming1_VFP	      Fld(8,16)
-#define VgaTiming1_VBP	      Fld(8,24)
-
-#define VgaTiming2_IVS	      0x01
-#define VgaTiming2_IHS	      0x02
-#define VgaTiming2_CVS	      0x04
-#define VgaTiming2_CHS	      0x08
-
-#define VgaTiming3_HBS	      Fld(8,0)
-#define VgaTiming3_HBE	      Fld(8,8)
-#define VgaTiming3_VBS	      Fld(8,16)
-#define VgaTiming3_VBE	      Fld(8,24)
-
-#define VgaBorder_BCOL	      Fld(24,0)
-
-#define VgaStatus_VFUF	      0x01
-#define VgaStatus_VNext	      0x02
-#define VgaStatus_VComp	      0x04
-
-#define VgaInterruptMask_VFUFMask   0x00
-#define VgaInterruptMask_VNextMask  0x01
-#define VgaInterruptMask_VCompMask  0x02
-
-#define VgaPalette_R	      Fld(8,0)
-#define VgaPalette_G	      Fld(8,8)
-#define VgaPalette_B	      Fld(8,16)
-
-#define DacControl_DACON      0x0001
-#define DacControl_COMPON     0x0002
-#define DacControl_PEDON      0x0004
-#define DacControl_RTrim      Fld(5,4)
-#define DacControl_GTrim      Fld(5,9)
-#define DacControl_BTrim      Fld(5,14)
-
-#define VgaTest_TDAC	      0x00
-#define VgaTest_Datatest      Fld(4,1)
-#define VgaTest_DACTESTDAC    0x10
-#define VgaTest_DACTESTOUT    Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- *    Revision
- *    Control
- *    CommandStatus
- *    InterruptStatus
- *    InterruptEnable
- *    HCCA
- *    PeriodCurrentED
- *    ControlHeadED
- *    BulkHeadED
- *    BulkCurrentED
- *    DoneHead
- *    FmInterval
- *    FmRemaining
- *    FmNumber
- *    PeriodicStart
- *    LSThreshold
- *    RhDescriptorA
- *    RhDescriptorB
- *    RhStatus
- *    RhPortStatus
- *    USBStatus
- *    USBReset
- *    USTAR
- *    USWER
- *    USRFR
- *    USNFR
- *    USTCSR
- *    USSR
- *    
- */
-
-#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision	  _USB( 0x0000 )
-#define _Control	  _USB( 0x0888 )
-#define _CommandStatus	  _USB( 0x0c00 )
-#define _InterruptStatus  _USB( 0x1000 )
-#define _InterruptEnable  _USB( 0x1400 )
-#define _HCCA		  _USB( 0x1800 )
-#define _PeriodCurrentED  _USB( 0x1c00 )
-#define _ControlHeadED	  _USB( 0x2000 )
-#define _BulkHeadED	  _USB( 0x2800 )
-#define _BulkCurrentED	  _USB( 0x2c00 )
-#define _DoneHead	  _USB( 0x3000 )
-#define _FmInterval	  _USB( 0x3400 )
-#define _FmRemaining	  _USB( 0x3800 )
-#define _FmNumber	  _USB( 0x3c00 )
-#define _PeriodicStart	  _USB( 0x4000 )
-#define _LSThreshold	  _USB( 0x4400 )
-#define _RhDescriptorA	  _USB( 0x4800 )
-#define _RhDescriptorB	  _USB( 0x4c00 )
-#define _RhStatus	  _USB( 0x5000 )
-#define _RhPortStatus	  _USB( 0x5400 )
-#define _USBStatus	  _USB( 0x11800 )
-#define _USBReset	  _USB( 0x11c00 )
-
-#define _USTAR		  _USB( 0x10400 )
-#define _USWER		  _USB( 0x10800 )
-#define _USRFR		  _USB( 0x10c00 )
-#define _USNFR		  _USB( 0x11000 )
-#define _USTCSR		  _USB( 0x11400 )
-#define _USSR		  _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
-#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
-#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
-#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp	     (1<<7)
-#define USBStatus_IrqHciBuffAcc	     (1<<8)
-#define USBStatus_nIrqHciM	     (1<<9)
-#define USBStatus_nHciMFClr	     (1<<10)
-
-#define USBReset_ForceIfReset	     0x01
-#define USBReset_ForceHcReset	     0x02
-#define USBReset_ClkGenReset	     0x04
-
-#define USTCR_RdBstCntrl	     Fld(3,0)
-#define USTCR_ByteEnable	     Fld(4,3)
-#define USTCR_WriteEn		     (1<<7)
-#define USTCR_FifoCir		     (1<<8)
-#define USTCR_TestXferSel	     (1<<9)
-#define USTCR_FifoCirAtEnd	     (1<<10)
-#define USTCR_nSimScaleDownClk	     (1<<11)
-
-#define USSR_nAppMDEmpty	     0x01
-#define USSR_nAppMDFirst	     0x02
-#define USSR_nAppMDLast		     0x04
-#define USSR_nAppMDFull		     0x08
-#define USSR_nAppMAFull		     0x10
-#define USSR_XferReq		     0x20
-#define USSR_XferEnd		     0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- *    INTTEST0		Test register 0
- *    INTTEST1		Test register 1
- *    INTENABLE0	Interrupt Enable register 0
- *    INTENABLE1	Interrupt Enable register 1
- *    INTPOL0		Interrupt Polarity selection 0
- *    INTPOL1		Interrupt Polarity selection 1
- *    INTTSTSEL		Interrupt source selection
- *    INTSTATCLR0	Interrupt Status 0
- *    INTSTATCLR1	Interrupt Status 1
- *    INTSET0		Interrupt Set 0
- *    INTSET1		Interrupt Set 1
- */
-
-#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0	_INT( 0x1000 )
-#define _INTTEST1	_INT( 0x1400 )
-#define _INTENABLE0	_INT( 0x2000 )
-#define _INTENABLE1	_INT( 0x2400 )
-#define _INTPOL0	_INT( 0x3000 )
-#define _INTPOL1	_INT( 0x3400 )
-#define _INTTSTSEL     	_INT( 0x5000 )
-#define _INTSTATCLR0	_INT( 0x6000 )
-#define _INTSTATCLR1	_INT( 0x6400 )
-#define _INTSET0	_INT( 0x7000 )
-#define _INTSET1	_INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
- *    KBDCR		Control Register
- *    KBDSTAT		Status Register
- *    KBDDATA		Transmit/Receive Data register
- *    KBDCLKDIV		Clock Division Register
- *    KBDPRECNT		Clock Precount Register
- *    KBDTEST1		Test register 1
- *    KBDTEST2		Test register 2
- *    KBDTEST3		Test register 3
- *    KBDTEST4		Test register 4
- *    MSECR	
- *    MSESTAT
- *    MSEDATA
- *    MSECLKDIV
- *    MSEPRECNT
- *    MSETEST1
- *    MSETEST2
- *    MSETEST3
- *    MSETEST4
- *     
- */
-
-#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR		_KBD( 0x0000 )
-#define _KBDSTAT	_KBD( 0x0400 )
-#define _KBDDATA	_KBD( 0x0800 )
-#define _KBDCLKDIV	_KBD( 0x0c00 )
-#define _KBDPRECNT	_KBD( 0x1000 )
-#define	_KBDTEST1	_KBD( 0x2000 )
-#define _KBDTEST2	_KBD( 0x2400 )
-#define _KBDTEST3	_KBD( 0x2800 )
-#define _KBDTEST4	_KBD( 0x2c00 )
-#define _MSECR		_MSE( 0x0000 )
-#define _MSESTAT	_MSE( 0x0400 )
-#define _MSEDATA	_MSE( 0x0800 )
-#define _MSECLKDIV	_MSE( 0x0c00 )
-#define _MSEPRECNT	_MSE( 0x1000 )
-#define	_MSETEST1	_MSE( 0x2000 )
-#define _MSETEST2	_MSE( 0x2400 )
-#define _MSETEST3	_MSE( 0x2800 )
-#define _MSETEST4	_MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA		 0x08
-#define KBDCR_FKD		 0x02
-#define KBDCR_FKC		 0x01
-
-#define KBDSTAT_TXE		 0x80
-#define KBDSTAT_TXB		 0x40
-#define KBDSTAT_RXF		 0x20
-#define KBDSTAT_RXB		 0x10
-#define KBDSTAT_ENA		 0x08
-#define KBDSTAT_RXP		 0x04
-#define KBDSTAT_KBD		 0x02
-#define KBDSTAT_KBC		 0x01
-
-#define KBDCLKDIV_DivVal	 Fld(4,0)
-
-#define MSECR_ENA		 0x08
-#define MSECR_FKD		 0x02
-#define MSECR_FKC		 0x01
-
-#define MSESTAT_TXE		 0x80
-#define MSESTAT_TXB		 0x40
-#define MSESTAT_RXF		 0x20
-#define MSESTAT_RXB		 0x10
-#define MSESTAT_ENA		 0x08
-#define MSESTAT_RXP		 0x04	
-#define MSESTAT_MSD		 0x02
-#define MSESTAT_MSC		 0x01
-
-#define MSECLKDIV_DivVal	 Fld(4,0)
-
-#define KBDTEST1_CD		 0x80
-#define KBDTEST1_RC1		 0x40
-#define KBDTEST1_MC		 0x20
-#define KBDTEST1_C		 Fld(2,3)
-#define KBDTEST1_T2		 0x40
-#define KBDTEST1_T1		 0x20
-#define KBDTEST1_T0		 0x10
-#define KBDTEST2_TICBnRES	 0x08
-#define KBDTEST2_RKC		 0x04
-#define KBDTEST2_RKD		 0x02
-#define KBDTEST2_SEL		 0x01
-#define KBDTEST3_ms_16		 0x80
-#define KBDTEST3_us_64		 0x40
-#define KBDTEST3_us_16		 0x20
-#define KBDTEST3_DIV8		 0x10
-#define KBDTEST3_DIn		 0x08
-#define KBDTEST3_CIn		 0x04
-#define KBDTEST3_KD		 0x02
-#define KBDTEST3_KC		 0x01
-#define KBDTEST4_BC12		 0x80
-#define KBDTEST4_BC11		 0x40
-#define KBDTEST4_TRES		 0x20
-#define KBDTEST4_CLKOE		 0x10
-#define KBDTEST4_CRES		 0x08
-#define KBDTEST4_RXB		 0x04
-#define KBDTEST4_TXB		 0x02
-#define KBDTEST4_SRX		 0x01
-
-#define MSETEST1_CD		 0x80
-#define MSETEST1_RC1		 0x40
-#define MSETEST1_MC		 0x20
-#define MSETEST1_C		 Fld(2,3)
-#define MSETEST1_T2		 0x40
-#define MSETEST1_T1		 0x20
-#define MSETEST1_T0		 0x10
-#define MSETEST2_TICBnRES	 0x08
-#define MSETEST2_RKC		 0x04
-#define MSETEST2_RKD		 0x02
-#define MSETEST2_SEL		 0x01
-#define MSETEST3_ms_16		 0x80
-#define MSETEST3_us_64		 0x40
-#define MSETEST3_us_16		 0x20
-#define MSETEST3_DIV8		 0x10
-#define MSETEST3_DIn		 0x08
-#define MSETEST3_CIn		 0x04
-#define MSETEST3_KD		 0x02
-#define MSETEST3_KC		 0x01
-#define MSETEST4_BC12		 0x80
-#define MSETEST4_BC11		 0x40
-#define MSETEST4_TRES		 0x20
-#define MSETEST4_CLKOE		 0x10
-#define MSETEST4_CRES		 0x08
-#define MSETEST4_RXB		 0x04
-#define MSETEST4_TXB		 0x02
-#define MSETEST4_SRX		 0x01
-
-#endif  /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- *    PADWR	Port A Data Write Register
- *    PBDWR	Port B Data Write Register
- *    PADRR	Port A Data Read Register
- *    PBDRR	Port B Data Read Register
- *    PADDR	Port A Data Direction Register
- *    PBDDR	Port B Data Direction Register
- *    PASSR	Port A Sleep State Register
- *    PBSSR	Port B Sleep State Register
- *
- */
-
-#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR	       _PIO( 0x0000 )
-#define _PBDWR	       _PIO( 0x0400 )
-#define _PADRR	       _PIO( 0x0000 )
-#define _PBDRR	       _PIO( 0x0400 )
-#define _PADDR	       _PIO( 0x0800 )
-#define _PBDDR	       _PIO( 0x0c00 )
-#define _PASSR	       _PIO( 0x1000 )
-#define _PBSSR	       _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- *    PXDWR
- *    PXDRR
- *    PYDWR
- *    PYDRR
- *
- */
-
-#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
-
-#define _PXDWR	   _KEYPAD( 0x0000 )
-#define _PXDRR	   _KEYPAD( 0x0000 )
-#define _PYDWR	   _KEYPAD( 0x0400 )
-#define _PYDRR	   _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- *
- */
-
-#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR	   _CARD( 0x0000 )
-#define _PCCR	   _CARD( 0x0400 )
-#define _PCSSR	   _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready		0x0001
-#define PCSR_S1_ready		0x0002
-#define PCSR_S0_detected	0x0004
-#define PCSR_S1_detected	0x0008
-#define PCSR_S0_VS1		0x0010
-#define PCSR_S0_VS2		0x0020
-#define PCSR_S1_VS1		0x0040
-#define PCSR_S1_VS2		0x0080
-#define PCSR_S0_WP		0x0100
-#define PCSR_S1_WP		0x0200
-#define PCSR_S0_BVD1_nSTSCHG	0x0400
-#define PCSR_S0_BVD2_nSPKR	0x0800
-#define PCSR_S1_BVD1_nSTSCHG	0x1000
-#define PCSR_S1_BVD2_nSPKR	0x2000
-
-#define PCCR_S0_VPP0		0x0001
-#define PCCR_S0_VPP1		0x0002
-#define PCCR_S0_VCC0		0x0004
-#define PCCR_S0_VCC1		0x0008
-#define PCCR_S1_VPP0		0x0010
-#define PCCR_S1_VPP1		0x0020
-#define PCCR_S1_VCC0		0x0040
-#define PCCR_S1_VCC1		0x0080
-#define PCCR_S0_reset		0x0100
-#define PCCR_S1_reset		0x0200
-#define PCCR_S0_float		0x0400
-#define PCCR_S1_float		0x0800
-
-#define PCSSR_S0_VCC0		0x0001
-#define PCSSR_S0_VCC1		0x0002
-#define PCSSR_S0_VPP0		0x0004
-#define PCSSR_S0_VPP1		0x0008
-#define PCSSR_S0_control	0x0010
-#define PCSSR_S1_VCC0		0x0020
-#define PCSSR_S1_VCC1		0x0040
-#define PCSSR_S1_VPP0		0x0080
-#define PCSSR_S1_VPP1		0x0100
-#define PCSSR_S1_control	0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/include/asm-arm/arch-sa1100/SA-1111.h
deleted file mode 100644
index c38f60915cb6..000000000000
--- a/include/asm-arm/arch-sa1100/SA-1111.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Moved to new location
- */
-#warning using old SA-1111.h - update to <asm/hardware/sa1111.h>
-#include <asm/hardware/sa1111.h>
diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h
deleted file mode 100644
index d6a1bb5b4944..000000000000
--- a/include/asm-arm/arch-sa1100/assabet.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/assabet.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_ASSABET_H
-#define __ASM_ARCH_ASSABET_H
-
-
-/* System Configuration Register flags */
-
-#define ASSABET_SCR_SDRAM_LOW	(1<<2)	/* SDRAM size (low bit) */
-#define ASSABET_SCR_SDRAM_HIGH	(1<<3)	/* SDRAM size (high bit) */
-#define ASSABET_SCR_FLASH_LOW	(1<<4)	/* Flash size (low bit) */
-#define ASSABET_SCR_FLASH_HIGH	(1<<5)	/* Flash size (high bit) */
-#define ASSABET_SCR_GFX		(1<<8)	/* Graphics Accelerator (0 = present) */
-#define ASSABET_SCR_SA1111	(1<<9)	/* Neponset (0 = present) */
-
-#define ASSABET_SCR_INIT	-1
-
-extern unsigned long SCR_value;
-
-#ifdef CONFIG_ASSABET_NEPONSET
-#define machine_has_neponset()  ((SCR_value & ASSABET_SCR_SA1111) == 0)
-#else
-#define machine_has_neponset()	(0)
-#endif
-
-/* Board Control Register */
-
-#define ASSABET_BCR_BASE  0xf1000000
-#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
-
-#define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
-#define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
-#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
-#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
-#define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
-#define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
-#define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
-#define ASSABET_BCR_STEREO_LB	(1<<6)	/* Stereo Loopback */
-#define ASSABET_BCR_CF_BUS_OFF	(1<<7)	/* Compact Flash bus (0 = on, 1 = off (float)) */
-#define ASSABET_BCR_AUDIO_ON	(1<<8)	/* Audio power on */
-#define ASSABET_BCR_LIGHT_ON	(1<<9)	/* Backlight */
-#define ASSABET_BCR_LCD_12RGB	(1<<10)	/* 0 = 16RGB, 1 = 12RGB */
-#define ASSABET_BCR_LCD_ON	(1<<11)	/* LCD power on */
-#define ASSABET_BCR_RS232EN	(1<<12)	/* RS232 transceiver enable */
-#define ASSABET_BCR_LED_RED	(1<<13)	/* D9 (0 = on, 1 = off) */
-#define ASSABET_BCR_LED_GREEN	(1<<14)	/* D8 (0 = on, 1 = off) */
-#define ASSABET_BCR_VIB_ON	(1<<15)	/* Vibration motor (quiet alert) */
-#define ASSABET_BCR_COM_DTR	(1<<16)	/* COMport Data Terminal Ready */
-#define ASSABET_BCR_COM_RTS	(1<<17)	/* COMport Request To Send */
-#define ASSABET_BCR_RAD_WU	(1<<18)	/* Radio wake up interrupt */
-#define ASSABET_BCR_SMB_EN	(1<<19)	/* System management bus enable */
-#define ASSABET_BCR_TV_IR_DEC	(1<<20)	/* TV IR Decode Enable (not implemented) */
-#define ASSABET_BCR_QMUTE	(1<<21)	/* Quick Mute */
-#define ASSABET_BCR_RAD_ON	(1<<22)	/* Radio Power On */
-#define ASSABET_BCR_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
-
-#ifdef CONFIG_SA1100_ASSABET
-extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
-#else
-#define ASSABET_BCR_frob(x,y)	do { } while (0)
-#endif
-
-#define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
-#define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
-
-#define ASSABET_BSR_BASE	0xf1000000
-#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
-
-#define ASSABET_BSR_RS232_VALID	(1 << 24)
-#define ASSABET_BSR_COM_DCD	(1 << 25)
-#define ASSABET_BSR_COM_CTS	(1 << 26)
-#define ASSABET_BSR_COM_DSR	(1 << 27)
-#define ASSABET_BSR_RAD_CTS	(1 << 28)
-#define ASSABET_BSR_RAD_DSR	(1 << 29)
-#define ASSABET_BSR_RAD_DCD	(1 << 30)
-#define ASSABET_BSR_RAD_RI	(1 << 31)
-
-
-/* GPIOs for which the generic definition doesn't say much */
-#define ASSABET_GPIO_RADIO_IRQ		GPIO_GPIO (14)	/* Radio interrupt request  */
-#define ASSABET_GPIO_PS_MODE_SYNC	GPIO_GPIO (16)	/* Power supply mode/sync   */
-#define ASSABET_GPIO_STEREO_64FS_CLK	GPIO_GPIO (19)	/* SSP UDA1341 clock input  */
-#define ASSABET_GPIO_CF_IRQ		GPIO_GPIO (21)	/* CF IRQ   */
-#define ASSABET_GPIO_CF_CD		GPIO_GPIO (22)	/* CF CD */
-#define ASSABET_GPIO_CF_BVD2		GPIO_GPIO (24)	/* CF BVD */
-#define ASSABET_GPIO_GFX_IRQ		GPIO_GPIO (24)	/* Graphics IRQ */
-#define ASSABET_GPIO_CF_BVD1		GPIO_GPIO (25)	/* CF BVD */
-#define ASSABET_GPIO_BATT_LOW		GPIO_GPIO (26)	/* Low battery */
-#define ASSABET_GPIO_RCLK		GPIO_GPIO (26)	/* CCLK/2  */
-
-#define ASSABET_IRQ_GPIO_CF_IRQ		IRQ_GPIO21
-#define ASSABET_IRQ_GPIO_CF_CD		IRQ_GPIO22
-#define ASSABET_IRQ_GPIO_CF_BVD2	IRQ_GPIO24
-#define ASSABET_IRQ_GPIO_CF_BVD1	IRQ_GPIO25
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/badge4.h b/include/asm-arm/arch-sa1100/badge4.h
deleted file mode 100644
index 8d7a671492db..000000000000
--- a/include/asm-arm/arch-sa1100/badge4.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/badge4.h
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <asm/hardware.h> instead"
-#endif
-
-#define BADGE4_SA1111_BASE		(0x48000000)
-
-/* GPIOs on the BadgePAD 4 */
-#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
-
-#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
-#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
-#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
-#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
-#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
-#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
-#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
-#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
-#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
-#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
-#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
-#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
-
-#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
-#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
-
-#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
-#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
-
-#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
-#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
-#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
-#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
-
-#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
-#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
-
-#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
-
-#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
-
-#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
-
-#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
-
-#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
-
-/* Interrupts on the BadgePAD 4 */
-#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
-
-
-/* PCM5ENV Usage tracking */
-
-#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
-#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
-#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
-#define BADGE4_5V_USB			(1<<2)
-#define BADGE4_5V_INITIALLY		(1<<3)
-
-#ifndef __ASSEMBLY__
-extern void badge4_set_5V(unsigned subsystem, int on);
-#endif
diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h
deleted file mode 100644
index f1f0e3387d9c..000000000000
--- a/include/asm-arm/arch-sa1100/bitfield.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/include/asm-arm/arch-sa1100/cerf.h b/include/asm-arm/arch-sa1100/cerf.h
deleted file mode 100644
index 9a19c3d07c1e..000000000000
--- a/include/asm-arm/arch-sa1100/cerf.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/cerf.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- */
-#ifndef _INCLUDE_CERF_H_
-#define _INCLUDE_CERF_H_
-
-
-#define CERF_ETH_IO			0xf0000000
-#define CERF_ETH_IRQ IRQ_GPIO26
-
-#define CERF_GPIO_CF_BVD2		GPIO_GPIO (19)
-#define CERF_GPIO_CF_BVD1		GPIO_GPIO (20)
-#define CERF_GPIO_CF_RESET		GPIO_GPIO (21)
-#define CERF_GPIO_CF_IRQ		GPIO_GPIO (22)
-#define CERF_GPIO_CF_CD			GPIO_GPIO (23)
-
-#define CERF_IRQ_GPIO_CF_BVD2		IRQ_GPIO19
-#define CERF_IRQ_GPIO_CF_BVD1		IRQ_GPIO20
-#define CERF_IRQ_GPIO_CF_IRQ		IRQ_GPIO22
-#define CERF_IRQ_GPIO_CF_CD		IRQ_GPIO23
-
-#endif // _INCLUDE_CERF_H_
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
deleted file mode 100644
index 762eba535813..000000000000
--- a/include/asm-arm/arch-sa1100/collie.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/collie.h
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   07-07-2002 Chris Larson <clarson@digi.com>
- *
- */
-#ifndef __ASM_ARCH_COLLIE_H
-#define __ASM_ARCH_COLLIE_H
-
-
-#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
-#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
-#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
-#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
-#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
-#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
-#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
-#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
-#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
-
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
-				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
-				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
-				COLLIE_SCP_CHARGE_ON )
-
-/* GPIOs for which the generic definition doesn't say much */
-
-#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
-#define COLLIE_GPIO_CO			GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
-
-/* Interrupts */
-
-#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
-#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
-#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
-#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
-#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
-#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
-#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
-#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
-#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
-#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
-#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
-
-#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
-
-/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
-#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
-					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S
deleted file mode 100644
index 267c317a7408..000000000000
--- a/include/asm-arm/arch-sa1100/debug-macro.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/include/asm-arm/arch-sa1100/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <asm/hardware.h>
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		movne	\rx, #0xf8000000	@ virtual address
-
-		@ We probe for the active serial port here, coherently with
-		@ the comment in include/asm-arm/arch-sa1100/uncompress.h.
-		@ We assume r1 can be clobbered.
-
-		@ see if Ser3 is active
-		add	\rx, \rx, #0x00050000
-		ldr	r1, [\rx, #UTCR3]
-		tst	r1, #UTCR3_TXE
-
-		@ if Ser3 is inactive, then try Ser1
-		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
-
-		@ if Ser1 is inactive, then try Ser2
-		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
-
-		@ if all ports are inactive, then there is nothing we can do
-		moveq	pc, lr
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UTDR]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TNF
-		beq	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TBY
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h
deleted file mode 100644
index 6b7917a2e77a..000000000000
--- a/include/asm-arm/arch-sa1100/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/dma.h
- *
- * Generic SA1100 DMA support
- *
- * Copyright (C) 2000 Nicolas Pitre
- *
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "hardware.h"
-
-
-/*
- * The SA1100 has six internal DMA channels.
- */
-#define SA1100_DMA_CHANNELS	6
-
-/*
- * Maximum physical DMA buffer size
- */
-#define MAX_DMA_SIZE		0x1fff
-#define CUT_DMA_SIZE		0x1000
-
-/*
- * All possible SA1100 devices a DMA channel can be attached to.
- */
-typedef enum {
-	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
-	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
-	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
-	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
-	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
-	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
-	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
-	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
-	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
-	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
-	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
-	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
-	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
-	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
-	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
-	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
-	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
-	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
-} dma_device_t;
-
-typedef struct {
-	volatile u_long DDAR;
-	volatile u_long SetDCSR;
-	volatile u_long ClrDCSR;
-	volatile u_long RdDCSR;
-	volatile dma_addr_t DBSA;
-	volatile u_long DBTA;
-	volatile dma_addr_t DBSB;
-	volatile u_long DBTB;
-} dma_regs_t;
-
-typedef void (*dma_callback_t)(void *data);
-
-/*
- * DMA function prototypes
- */
-
-extern int sa1100_request_dma( dma_device_t device, const char *device_id,
-			       dma_callback_t callback, void *data,
-			       dma_regs_t **regs );
-extern void sa1100_free_dma( dma_regs_t *regs );
-extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
-extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
-extern void sa1100_reset_dma(dma_regs_t *regs);
-
-/**
- * 	sa1100_stop_dma - stop DMA in progress
- * 	@regs: identifier for the channel to use
- *
- * 	This stops DMA without clearing buffer pointers. Unlike
- * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
- * 	or sa1100_get_dma_pos().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_resume_dma - resume DMA on a stopped channel
- * 	@regs: identifier for the channel to use
- *
- * 	This resumes DMA on a channel previously stopped with
- * 	sa1100_stop_dma().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_clear_dma - clear DMA pointers
- * 	@regs: identifier for the channel to use
- *
- * 	This clear any DMA state so the DMA engine is ready to restart
- * 	with new buffers through sa1100_start_dma(). Any buffers in flight
- * 	are discarded.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S
deleted file mode 100644
index 127db4aaf4f2..000000000000
--- a/include/asm-arm/arch-sa1100/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/entry-macro.S
- *
- * Low-level IRQ helper macros for SA1100-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
-		add	\base, \base, #0x00050000
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base]		@ get irqs
-		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
-		ands	\irqstat, \irqstat, \irqnr
-		mov	\irqnr, #0
-		beq	1001f
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-		.endm
-
diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h
deleted file mode 100644
index 93d3395b102d..000000000000
--- a/include/asm-arm/arch-sa1100/gpio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/gpio.h
- *
- * SA1100 GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_SA1100_GPIO_H
-#define __ASM_ARCH_SA1100_GPIO_H
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		return GPLR & GPIO_GPIO(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		if (value)
-			GPSR = GPIO_GPIO(gpio);
-		else
-			GPCR = GPIO_GPIO(gpio);
-	else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep	__gpio_cansleep
-
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if (gpio < 11)
-		return IRQ_GPIO0 + gpio;
-	else
-		return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIO11_27)
-		return irq - IRQ_GPIO0;
-	else
-		return irq - IRQ_GPIO11 + 11;
-}
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h
deleted file mode 100644
index 1b6355971574..000000000000
--- a/include/asm-arm/arch-sa1100/h3600.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT     0xf0000000
-#define H3600_BANK_2_VIRT    0xf1000000
-#define H3600_BANK_4_VIRT    0xf3800000
-
-/*
-   Machine-independent GPIO definitions
-   --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
-
-#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
-	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
-	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
-	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
-	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
-	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
-	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
-	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
-	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
-	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
-	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
-	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
-};
-
-struct ipaq_model_ops {
-	const char     *generic_name;
-	void	      (*control)(enum ipaq_egpio_type, int);
-	unsigned long (*read)(void);
-	void	      (*blank_callback)(int blank);
-	int	      (*pm_callback)(int req);	    /* Primary model callback */
-	int	      (*pm_callback_aux)(int req);  /* Secondary callback (used by HAL modules) */
-};
-
-extern struct ipaq_model_ops ipaq_model_ops;
-
-static __inline__ const char * h3600_generic_name(void)
-{
-	return ipaq_model_ops.generic_name;
-}
-
-static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,level);
-}
-
-static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,0);
-}
-
-static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
-{
-	if (ipaq_model_ops.control)
-		ipaq_model_ops.control(x,1);
-}
-
-static __inline__ unsigned long read_h3600_egpio(void)
-{
-	if (ipaq_model_ops.read)
-		return ipaq_model_ops.read();
-	return 0;
-}
-
-static __inline__ int  h3600_register_blank_callback(void (*f)(int))
-{
-	ipaq_model_ops.blank_callback = f;
-	return 0;
-}
-
-static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
-{
-	ipaq_model_ops.blank_callback = NULL;
-}
-
-
-static __inline__ int  h3600_register_pm_callback(int (*f)(int))
-{
-	ipaq_model_ops.pm_callback_aux = f;
-	return 0;
-}
-
-static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
-{
-	ipaq_model_ops.pm_callback_aux = NULL;
-}
-
-static __inline__ int h3600_power_management(int req)
-{
-	if (ipaq_model_ops.pm_callback)
-		return ipaq_model_ops.pm_callback(req);
-	return 0;
-}
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */
diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/include/asm-arm/arch-sa1100/h3600_gpio.h
deleted file mode 100644
index 62b0b7879685..000000000000
--- a/include/asm-arm/arch-sa1100/h3600_gpio.h
+++ /dev/null
@@ -1,540 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
-
-/* H3800 specific pins */
-#define GPIO_H3800_AC_IN                GPIO_GPIO (12)
-#define GPIO_H3800_COM_DSR              GPIO_GPIO (13)
-#define GPIO_H3800_MMC_INT              GPIO_GPIO (18)
-#define GPIO_H3800_NOPT_IND             GPIO_GPIO (20)   /* Almost exactly the same as GPIO_H3600_OPT_DET */
-#define GPIO_H3800_OPT_BAT_FAULT        GPIO_GPIO (22)
-#define GPIO_H3800_CLK_OUT              GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
-
-#define IRQ_GPIO_H3800_MMC_INT          IRQ_GPIO18
-#define IRQ_GPIO_H3800_NOPT_IND         IRQ_GPIO20 /* almost same as OPT_DET */
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON		(1 << 0)
-#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
-#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
-#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
-
-/********************* H3800, ASIC #2 ********************/
-
-#define _H3800_ASIC2_Base            (H3600_EGPIO_VIRT)
-#define H3800_ASIC2_OFFSET(s,x,y)    \
-    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-#define H3800_ASIC2_NOFFSET(s,x,n,y) \
-    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-
-#define _H3800_ASIC2_GPIO_Base                 0x0000
-#define _H3800_ASIC2_GPIO_Direction            0x0000    /* R/W, 16 bits 1:input, 0:output */
-#define _H3800_ASIC2_GPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
-#define _H3800_ASIC2_GPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_GPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
-#define _H3800_ASIC2_GPIO_InterruptClear       0x0010    /* W,   12 bits */
-#define _H3800_ASIC2_GPIO_InterruptFlag        0x0010    /* R,   12 bits - reads int status */
-#define _H3800_ASIC2_GPIO_Data                 0x0014    /* R/W, 16 bits */
-#define _H3800_ASIC2_GPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_GPIO_InterruptEnable      0x001c    /* R/W, 12 bits 1:enable interrupt */
-#define _H3800_ASIC2_GPIO_Alternate            0x003c    /* R/W, 12+1 bits - set alternate functions */
-
-#define H3800_ASIC2_GPIO_Direction          H3800_ASIC2_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC2_GPIO_InterruptType      H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
-#define H3800_ASIC2_GPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
-#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
-#define H3800_ASIC2_GPIO_InterruptClear     H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
-#define H3800_ASIC2_GPIO_InterruptFlag      H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
-#define H3800_ASIC2_GPIO_Data               H3800_ASIC2_OFFSET( u16, GPIO, Data )
-#define H3800_ASIC2_GPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
-#define H3800_ASIC2_GPIO_InterruptEnable    H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
-#define H3800_ASIC2_GPIO_Alternate          H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
-
-#define GPIO_H3800_ASIC2_IN_Y1_N          (1 << 0)   /* Output: Touchscreen Y1 */
-#define GPIO_H3800_ASIC2_IN_X0            (1 << 1)   /* Output: Touchscreen X0 */
-#define GPIO_H3800_ASIC2_IN_Y0            (1 << 2)   /* Output: Touchscreen Y0 */
-#define GPIO_H3800_ASIC2_IN_X1_N          (1 << 3)   /* Output: Touchscreen X1 */
-#define GPIO_H3800_ASIC2_BT_RST           (1 << 4)   /* Output: Bluetooth reset */
-#define GPIO_H3800_ASIC2_PEN_IRQ          (1 << 5)   /* Input : Pen down        */
-#define GPIO_H3800_ASIC2_SD_DETECT        (1 << 6)   /* Input : SD detect */
-#define GPIO_H3800_ASIC2_EAR_IN_N         (1 << 7)   /* Input : Audio jack plug inserted */
-#define GPIO_H3800_ASIC2_OPT_PCM_RESET    (1 << 8)   /* Output: */
-#define GPIO_H3800_ASIC2_OPT_RESET        (1 << 9)   /* Output: */
-#define GPIO_H3800_ASIC2_USB_DETECT_N     (1 << 10)  /* Input : */
-#define GPIO_H3800_ASIC2_SD_CON_SLT       (1 << 11)  /* Input : */
-
-#define _H3800_ASIC2_KPIO_Base                 0x0200
-#define _H3800_ASIC2_KPIO_Direction            0x0000    /* R/W, 12 bits 1:input, 0:output */
-#define _H3800_ASIC2_KPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
-#define _H3800_ASIC2_KPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_KPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
-#define _H3800_ASIC2_KPIO_InterruptClear       0x0010    /* W,   20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_InterruptFlag        0x0010    /* R,   20 bits - 8 special - reads int status */
-#define _H3800_ASIC2_KPIO_Data                 0x0014    /* R/W, 16 bits */
-#define _H3800_ASIC2_KPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_KPIO_InterruptEnable      0x001c    /* R/W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_Alternate            0x003c    /* R/W, 6 bits */
-
-#define H3800_ASIC2_KPIO_Direction          H3800_ASIC2_OFFSET( u16, KPIO, Direction )
-#define H3800_ASIC2_KPIO_InterruptType      H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
-#define H3800_ASIC2_KPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
-#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
-#define H3800_ASIC2_KPIO_InterruptClear     H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
-#define H3800_ASIC2_KPIO_InterruptFlag      H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
-#define H3800_ASIC2_KPIO_Data               H3800_ASIC2_OFFSET( u16, KPIO, Data )
-#define H3800_ASIC2_KPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
-#define H3800_ASIC2_KPIO_InterruptEnable    H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
-#define H3800_ASIC2_KPIO_Alternate          H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
-
-#define H3800_ASIC2_KPIO_SPI_INT        ( 1 << 16 )
-#define H3800_ASIC2_KPIO_OWM_INT        ( 1 << 17 )
-#define H3800_ASIC2_KPIO_ADC_INT        ( 1 << 18 )
-#define H3800_ASIC2_KPIO_UART_0_INT     ( 1 << 19 )
-#define H3800_ASIC2_KPIO_UART_1_INT     ( 1 << 20 )
-#define H3800_ASIC2_KPIO_TIMER_0_INT    ( 1 << 21 )
-#define H3800_ASIC2_KPIO_TIMER_1_INT    ( 1 << 22 )
-#define H3800_ASIC2_KPIO_TIMER_2_INT    ( 1 << 23 )
-
-#define KPIO_H3800_ASIC2_RECORD_BTN_N     (1 << 0)   /* Record button */
-#define KPIO_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Keypad */
-#define KPIO_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* */
-#define KPIO_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* */
-#define KPIO_H3800_ASIC2_KEY_LEFT_N       (1 << 6)   /* */
-#define KPIO_H3800_ASIC2_KEY_RIGHT_N      (1 << 7)   /* */
-#define KPIO_H3800_ASIC2_KEY_AP1_N        (1 << 8)   /* Old "Calendar" */
-#define KPIO_H3800_ASIC2_KEY_AP2_N        (1 << 9)   /* Old "Schedule" */
-#define KPIO_H3800_ASIC2_KEY_AP3_N        (1 << 10)  /* Old "Q"        */
-#define KPIO_H3800_ASIC2_KEY_AP4_N        (1 << 11)  /* Old "Undo"     */
-
-/* Alternate KPIO functions (set by default) */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Action key */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* J1 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* J2 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* J3 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* J4 of keypad input */
-
-#define _H3800_ASIC2_SPI_Base                  0x0400
-#define _H3800_ASIC2_SPI_Control               0x0000    /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_Data                  0x0004    /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_ChipSelectDisabled    0x0008    /* W   8 bits */
-
-#define H3800_ASIC2_SPI_Control             H3800_ASIC2_OFFSET( u8, SPI, Control )
-#define H3800_ASIC2_SPI_Data                H3800_ASIC2_OFFSET( u8, SPI, Data )
-#define H3800_ASIC2_SPI_ChipSelectDisabled  H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
-
-#define _H3800_ASIC2_PWM_0_Base                0x0600
-#define _H3800_ASIC2_PWM_1_Base                0x0700
-#define _H3800_ASIC2_PWM_TimeBase              0x0000    /* R/W 6 bits */
-#define _H3800_ASIC2_PWM_PeriodTime            0x0004    /* R/W 12 bits */
-#define _H3800_ASIC2_PWM_DutyTime              0x0008    /* R/W 12 bits */
-
-#define H3800_ASIC2_PWM_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 0, TimeBase )
-#define H3800_ASIC2_PWM_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
-#define H3800_ASIC2_PWM_0_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
-
-#define H3800_ASIC2_PWM_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 1, TimeBase )
-#define H3800_ASIC2_PWM_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
-#define H3800_ASIC2_PWM_1_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
-
-#define H3800_ASIC2_PWM_TIMEBASE_MASK             0xf    /* Low 4 bits sets time base, max = 8 */
-#define H3800_ASIC2_PWM_TIMEBASE_ENABLE    ( 1 << 4 )    /* Enable clock */
-#define H3800_ASIC2_PWM_TIMEBASE_CLEAR     ( 1 << 5 )    /* Clear the PWM */
-
-#define _H3800_ASIC2_LED_0_Base                0x0800
-#define _H3800_ASIC2_LED_1_Base                0x0880
-#define _H3800_ASIC2_LED_2_Base                0x0900
-#define _H3800_ASIC2_LED_TimeBase              0x0000    /* R/W  7 bits */
-#define _H3800_ASIC2_LED_PeriodTime            0x0004    /* R/W 12 bits */
-#define _H3800_ASIC2_LED_DutyTime              0x0008    /* R/W 12 bits */
-#define _H3800_ASIC2_LED_AutoStopCount         0x000c    /* R/W 16 bits */
-
-#define H3800_ASIC2_LED_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 0, TimeBase )
-#define H3800_ASIC2_LED_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
-#define H3800_ASIC2_LED_0_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
-#define H3800_ASIC2_LED_0_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
-
-#define H3800_ASIC2_LED_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 1, TimeBase )
-#define H3800_ASIC2_LED_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
-#define H3800_ASIC2_LED_1_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
-#define H3800_ASIC2_LED_1_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
-
-#define H3800_ASIC2_LED_2_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 2, TimeBase )
-#define H3800_ASIC2_LED_2_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
-#define H3800_ASIC2_LED_2_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
-#define H3800_ASIC2_LED_2_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
-
-#define H3800_ASIC2_LED_TIMEBASE_MASK            0x0f    /* Low 4 bits sets time base, max = 13 */
-#define H3800_ASIC2_LED_TIMEBASE_BLINK     ( 1 << 4 )    /* Enable blinking */
-#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP  ( 1 << 5 )
-#define H3800_ASIC2_LED_TIMEBASE_ALWAYS    ( 1 << 6 )    /* Enable blink always */
-
-#define _H3800_ASIC2_UART_0_Base               0x0A00
-#define _H3800_ASIC2_UART_1_Base               0x0C00
-#define _H3800_ASIC2_UART_Receive              0x0000    /* R    8 bits */
-#define _H3800_ASIC2_UART_Transmit             0x0000    /*   W  8 bits */
-#define _H3800_ASIC2_UART_IntEnable            0x0004    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_IntVerify            0x0008    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_FIFOControl          0x000c    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_LineControl          0x0010    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_ModemStatus          0x0014    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_LineStatus           0x0018    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_ScratchPad           0x001c    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchL        0x0020    /* R/W  8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchH        0x0024    /* R/W  8 bits */
-
-#define H3800_ASIC2_UART_0_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 0, Receive )
-#define H3800_ASIC2_UART_0_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 0, Transmit )
-#define H3800_ASIC2_UART_0_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntEnable )
-#define H3800_ASIC2_UART_0_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntVerify )
-#define H3800_ASIC2_UART_0_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, FIFOControl )
-#define H3800_ASIC2_UART_0_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, LineControl )
-#define H3800_ASIC2_UART_0_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 0, ModemStatus )
-#define H3800_ASIC2_UART_0_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 0, LineStatus )
-#define H3800_ASIC2_UART_0_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 0, ScratchPad )
-#define H3800_ASIC2_UART_0_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchL )
-#define H3800_ASIC2_UART_0_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchH )
-
-#define H3800_ASIC2_UART_1_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 1, Receive )
-#define H3800_ASIC2_UART_1_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 1, Transmit )
-#define H3800_ASIC2_UART_1_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntEnable )
-#define H3800_ASIC2_UART_1_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntVerify )
-#define H3800_ASIC2_UART_1_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, FIFOControl )
-#define H3800_ASIC2_UART_1_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, LineControl )
-#define H3800_ASIC2_UART_1_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 1, ModemStatus )
-#define H3800_ASIC2_UART_1_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 1, LineStatus )
-#define H3800_ASIC2_UART_1_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 1, ScratchPad )
-#define H3800_ASIC2_UART_1_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchL )
-#define H3800_ASIC2_UART_1_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchH )
-
-#define _H3800_ASIC2_TIMER_Base                0x0E00
-#define _H3800_ASIC2_TIMER_Command             0x0000    /* R/W  8 bits */
-
-#define H3800_ASIC2_TIMER_Command           H3800_ASIC2_OFFSET( u8, Timer, Command )
-
-#define H3800_ASIC2_TIMER_GAT_0            ( 1 << 0 )    /* Gate enable, counter 0 */
-#define H3800_ASIC2_TIMER_GAT_1            ( 1 << 1 )    /* Gate enable, counter 1 */
-#define H3800_ASIC2_TIMER_GAT_2            ( 1 << 2 )    /* Gate enable, counter 2 */
-#define H3800_ASIC2_TIMER_CLK_0            ( 1 << 3 )    /* Clock enable, counter 0 */
-#define H3800_ASIC2_TIMER_CLK_1            ( 1 << 4 )    /* Clock enable, counter 1 */
-#define H3800_ASIC2_TIMER_CLK_2            ( 1 << 5 )    /* Clock enable, counter 2 */
-#define H3800_ASIC2_TIMER_MODE_0           ( 1 << 6 )    /* Mode 0 enable, counter 0 */
-#define H3800_ASIC2_TIMER_MODE_1           ( 1 << 7 )    /* Mode 0 enable, counter 1 */
-
-#define _H3800_ASIC2_CLOCK_Base                0x1000
-#define _H3800_ASIC2_CLOCK_Enable              0x0000    /* R/W  18 bits */
-
-#define H3800_ASIC2_CLOCK_Enable            H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
-
-#define H3800_ASIC2_CLOCK_AUDIO_1              0x0001    /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_2              0x0002    /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_3              0x0004    /* Enable 5.6 MHz clock for 11 kHZ sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_4              0x0008    /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
-#define H3800_ASIC2_CLOCK_ADC              ( 1 << 4 )    /* 1.024 MHz clock to ADC */
-#define H3800_ASIC2_CLOCK_SPI              ( 1 << 5 )    /* 4.096 MHz clock to SPI */
-#define H3800_ASIC2_CLOCK_OWM              ( 1 << 6 )    /* 4.096 MHz clock to OWM */
-#define H3800_ASIC2_CLOCK_PWM              ( 1 << 7 )    /* 2.048 MHz clock to PWM */
-#define H3800_ASIC2_CLOCK_UART_1           ( 1 << 8 )    /* 24.576 MHz clock to UART1 (turn off bit 16) */
-#define H3800_ASIC2_CLOCK_UART_0           ( 1 << 9 )    /* 24.576 MHz clock to UART0 (turn off bit 17) */
-#define H3800_ASIC2_CLOCK_SD_1             ( 1 << 10 )   /* 16.934 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_2             ( 2 << 10 )   /* 24.576 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_3             ( 3 << 10 )   /* 33.869 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_4             ( 4 << 10 )   /* 49.152 MHz to SD */
-#define H3800_ASIC2_CLOCK_EX0              ( 1 << 13 )   /* Enable 32.768 kHz crystal */
-#define H3800_ASIC2_CLOCK_EX1              ( 1 << 14 )   /* Enable 24.576 MHz crystal */
-#define H3800_ASIC2_CLOCK_EX2              ( 1 << 15 )   /* Enable 33.869 MHz crystal */
-#define H3800_ASIC2_CLOCK_SLOW_UART_1      ( 1 << 16 )   /* Enable 3.686 MHz to UART1 (turn off bit 8) */
-#define H3800_ASIC2_CLOCK_SLOW_UART_0      ( 1 << 17 )   /* Enable 3.686 MHz to UART0 (turn off bit 9) */
-
-#define _H3800_ASIC2_ADC_Base                  0x1200
-#define _H3800_ASIC2_ADC_Multiplexer           0x0000    /* R/W 4 bits - low 3 bits set channel */
-#define _H3800_ASIC2_ADC_ControlStatus         0x0004    /* R/W 8 bits */
-#define _H3800_ASIC2_ADC_Data                  0x0008    /* R   10 bits */
-
-#define H3800_ASIC2_ADC_Multiplexer       H3800_ASIC2_OFFSET(  u8, ADC, Multiplexer )
-#define H3800_ASIC2_ADC_ControlStatus     H3800_ASIC2_OFFSET(  u8, ADC, ControlStatus )
-#define H3800_ASIC2_ADC_Data              H3800_ASIC2_OFFSET( u16, ADC, Data )
-
-#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK         0x07    /* Low 3 bits sets channel.  max = 4 */
-#define H3600_ASIC2_ADC_MUX_CLKEN          ( 1 << 3 )    /* Enable clock */
-
-#define H3600_ASIC2_ADC_CSR_ADPS_MASK            0x0f    /* Low 4 bits sets prescale, max = 8 */
-#define H3600_ASIC2_ADC_CSR_FREE_RUN       ( 1 << 4 )
-#define H3600_ASIC2_ADC_CSR_INT_ENABLE     ( 1 << 5 )
-#define H3600_ASIC2_ADC_CSR_START          ( 1 << 6 )    /* Set to start conversion.  Goes to 0 when done */
-#define H3600_ASIC2_ADC_CSR_ENABLE         ( 1 << 7 )    /* 1:power up ADC, 0:power down */
-
-
-#define _H3800_ASIC2_INTR_Base                 0x1600
-#define _H3800_ASIC2_INTR_MaskAndFlag          0x0000    /* R/(W) 8bits */
-#define _H3800_ASIC2_INTR_ClockPrescale        0x0004    /* R/(W) 5bits */
-#define _H3800_ASIC2_INTR_TimerSet             0x0008    /* R/(W) 8bits */
-
-#define H3800_ASIC2_INTR_MaskAndFlag      H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
-#define H3800_ASIC2_INTR_ClockPrescale    H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
-#define H3800_ASIC2_INTR_TimerSet         H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
-
-#define H3800_ASIC2_INTR_GLOBAL_MASK       ( 1 << 0 )    /* Global interrupt mask */
-#define H3800_ASIC2_INTR_POWER_ON_RESET    ( 1 << 1 )    /* 01: Power on reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_EXTERNAL_RESET    ( 2 << 1 )    /* 10: External reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_MASK_UART_0       ( 1 << 4 )
-#define H3800_ASIC2_INTR_MASK_UART_1       ( 1 << 5 )
-#define H3800_ASIC2_INTR_MASK_TIMER        ( 1 << 6 )
-#define H3800_ASIC2_INTR_MASK_OWM          ( 1 << 7 )
-
-#define H3800_ASIC2_INTR_CLOCK_PRESCALE          0x0f    /* 4 bits, max 14 */
-#define H3800_ASIC2_INTR_SET               ( 1 << 4 )    /* Time base enable */
-
-
-#define _H3800_ASIC2_OWM_Base                  0x1800
-#define _H3800_ASIC2_OWM_Command               0x0000    /* R/W 4 bits command register */
-#define _H3800_ASIC2_OWM_Data                  0x0004    /* R/W 8 bits, transmit / receive buffer */
-#define _H3800_ASIC2_OWM_Interrupt             0x0008    /* R/W Command register */
-#define _H3800_ASIC2_OWM_InterruptEnable       0x000c    /* R/W Command register */
-#define _H3800_ASIC2_OWM_ClockDivisor          0x0010    /* R/W 5 bits of divisor and pre-scale */
-
-#define H3800_ASIC2_OWM_Command            H3800_ASIC2_OFFSET( u8, OWM, Command )
-#define H3800_ASIC2_OWM_Data               H3800_ASIC2_OFFSET( u8, OWM, Data )
-#define H3800_ASIC2_OWM_Interrupt          H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
-#define H3800_ASIC2_OWM_InterruptEnable    H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
-#define H3800_ASIC2_OWM_ClockDivisor       H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
-
-#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 )    /* Set to force reset on 1-wire bus */
-#define H3800_ASIC2_OWM_CMD_SRA            ( 1 << 1 )    /* Set to switch to Search ROM accelerator mode */
-#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT      ( 1 << 2 )    /* Write only - forces bus low */
-#define H3800_ASIC2_OWM_CMD_DQ_INPUT       ( 1 << 3 )    /* Read only - reflects state of bus */
-
-#define H3800_ASIC2_OWM_INT_PD             ( 1 << 0 )    /* Presence detect */
-#define H3800_ASIC2_OWM_INT_PDR            ( 1 << 1 )    /* Presence detect result */
-#define H3800_ASIC2_OWM_INT_TBE            ( 1 << 2 )    /* Transmit buffer empty */
-#define H3800_ASIC2_OWM_INT_TEMT           ( 1 << 3 )    /* Transmit shift register empty */
-#define H3800_ASIC2_OWM_INT_RBF            ( 1 << 4 )    /* Receive buffer full */
-
-#define H3800_ASIC2_OWM_INTEN_EPD          ( 1 << 0 )    /* Enable receive buffer full interrupt */
-#define H3800_ASIC2_OWM_INTEN_IAS          ( 1 << 1 )    /* Enable transmit shift register empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETBE         ( 1 << 2 )    /* Enable transmit buffer empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETMT         ( 1 << 3 )    /* INTR active state */
-#define H3800_ASIC2_OWM_INTEN_ERBF         ( 1 << 4 )    /* Enable presence detect interrupt */
-
-#define _H3800_ASIC2_FlashCtl_Base             0x1A00
-
-/****************************************************/
-/* H3800, ASIC #1
- * This ASIC is accesed through ASIC #2, and
- * mapped into the 1c00 - 1f00 region
- */
-
-#define H3800_ASIC1_OFFSET(s,x,y)   \
-     (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
-
-#define _H3800_ASIC1_MMC_Base             0x1c00
-
-#define _H3800_ASIC1_MMC_StartStopClock     0x00    /* R/W 8bit                                  */
-#define _H3800_ASIC1_MMC_Status             0x02    /* R   See below, default 0x0040             */
-#define _H3800_ASIC1_MMC_ClockRate          0x04    /* R/W 8bit, low 3 bits are clock divisor    */
-#define _H3800_ASIC1_MMC_SPIRegister        0x08    /* R/W 8bit, see below                       */
-#define _H3800_ASIC1_MMC_CmdDataCont        0x0a    /* R/W 8bit, write to start MMC adapter      */
-#define _H3800_ASIC1_MMC_ResponseTimeout    0x0c    /* R/W 8bit, clocks before response timeout  */
-#define _H3800_ASIC1_MMC_ReadTimeout        0x0e    /* R/W 16bit, clocks before received data timeout */
-#define _H3800_ASIC1_MMC_BlockLength        0x10    /* R/W 10bit */
-#define _H3800_ASIC1_MMC_NumOfBlocks        0x12    /* R/W 16bit, in block mode, number of blocks  */
-#define _H3800_ASIC1_MMC_InterruptMask      0x1a    /* R/W 8bit */
-#define _H3800_ASIC1_MMC_CommandNumber      0x1c    /* R/W 6 bits */
-#define _H3800_ASIC1_MMC_ArgumentH          0x1e    /* R/W 16 bits  */
-#define _H3800_ASIC1_MMC_ArgumentL          0x20    /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ResFifo            0x22    /* R   8 x 16 bits - contains response FIFO */
-#define _H3800_ASIC1_MMC_BufferPartFull     0x28    /* R/W 8 bits */
-
-#define H3800_ASIC1_MMC_StartStopClock    H3800_ASIC1_OFFSET(  u8, MMC, StartStopClock )
-#define H3800_ASIC1_MMC_Status            H3800_ASIC1_OFFSET( u16, MMC, Status )
-#define H3800_ASIC1_MMC_ClockRate         H3800_ASIC1_OFFSET(  u8, MMC, ClockRate )
-#define H3800_ASIC1_MMC_SPIRegister       H3800_ASIC1_OFFSET(  u8, MMC, SPIRegister )
-#define H3800_ASIC1_MMC_CmdDataCont       H3800_ASIC1_OFFSET(  u8, MMC, CmdDataCont )
-#define H3800_ASIC1_MMC_ResponseTimeout   H3800_ASIC1_OFFSET(  u8, MMC, ResponseTimeout )
-#define H3800_ASIC1_MMC_ReadTimeout       H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
-#define H3800_ASIC1_MMC_BlockLength       H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
-#define H3800_ASIC1_MMC_NumOfBlocks       H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
-#define H3800_ASIC1_MMC_InterruptMask     H3800_ASIC1_OFFSET(  u8, MMC, InterruptMask )
-#define H3800_ASIC1_MMC_CommandNumber     H3800_ASIC1_OFFSET(  u8, MMC, CommandNumber )
-#define H3800_ASIC1_MMC_ArgumentH         H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
-#define H3800_ASIC1_MMC_ArgumentL         H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
-#define H3800_ASIC1_MMC_ResFifo           H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
-#define H3800_ASIC1_MMC_BufferPartFull    H3800_ASIC1_OFFSET(  u8, MMC, BufferPartFull )
-
-#define H3800_ASIC1_MMC_STOP_CLOCK                   (1 << 0)   /* Write to "StartStopClock" register */
-#define H3800_ASIC1_MMC_START_CLOCK                  (1 << 1)
-
-#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT          (1 << 0)
-#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT      (1 << 1)
-#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR       (1 << 2)
-#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR        (1 << 3)
-#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR        (1 << 4)  /* SPI data token error received */
-#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR    (1 << 5)
-#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY            (1 << 6)
-#define H3800_ASIC1_MMC_STATUS_FIFO_FULL             (1 << 7)
-#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE          (1 << 8)  /* MultiMediaCard clock stopped */
-#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE    (1 << 11) /* Write operation, indicates transfer finished */
-#define H3800_ASIC1_MMC_STATUS_END_PROGRAM           (1 << 12) /* End write and read operations */
-#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE  (1 << 13) /* End command response */
-
-#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE           (1 << 0)  /* Enables SPI mode */
-#define H3800_ASIC1_MMC_SPI_REG_CRC_ON               (1 << 1)  /* 1:turn on CRC    */
-#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE        (1 << 2)  /* 1:turn on SPI CS */
-#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK      0x38      /* Bits 3,4,5 are the SPI CS relative address */
-
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE  0x00
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1           0x01
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2           0x02
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3           0x03
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE         (1 << 2)  /* This command contains a data transfer */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE               (1 << 3)  /* This data transfer is a write */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE         (1 << 4)  /* This data transfer is in stream mode */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT            (1 << 5)  /* Busy signal expected after current cmd */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE          (1 << 6)  /* Enables the 80 bits for initializing card */
-
-#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE       (1 << 0)
-#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE             (1 << 1)
-#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE     (1 << 2)
-#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY             (1 << 3)
-
-#define H3800_ASIC1_MMC_BUFFER_PART_FULL                  (1 << 0)
-
-/********* GPIO **********/
-
-#define _H3800_ASIC1_GPIO_Base        0x1e00
-
-#define _H3800_ASIC1_GPIO_Mask          0x30    /* R/W 0:don't mask, 1:mask interrupt */
-#define _H3800_ASIC1_GPIO_Direction     0x32    /* R/W 0:input, 1:output              */
-#define _H3800_ASIC1_GPIO_Out           0x34    /* R/W 0:output low, 1:output high    */
-#define _H3800_ASIC1_GPIO_TriggerType   0x36    /* R/W 0:level, 1:edge                */
-#define _H3800_ASIC1_GPIO_EdgeTrigger   0x38    /* R/W 0:falling, 1:rising            */
-#define _H3800_ASIC1_GPIO_LevelTrigger  0x3A    /* R/W 0:low, 1:high level detect     */
-#define _H3800_ASIC1_GPIO_LevelStatus   0x3C    /* R/W 0:none, 1:detect               */
-#define _H3800_ASIC1_GPIO_EdgeStatus    0x3E    /* R/W 0:none, 1:detect               */
-#define _H3800_ASIC1_GPIO_State         0x40    /* R   See masks below  (default 0)         */
-#define _H3800_ASIC1_GPIO_Reset         0x42    /* R/W See masks below  (default 0x04)      */
-#define _H3800_ASIC1_GPIO_SleepMask     0x44    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
-#define _H3800_ASIC1_GPIO_SleepDir      0x46    /* R/W direction 0:input, 1:output in sleep mode    */
-#define _H3800_ASIC1_GPIO_SleepOut      0x48    /* R/W level 0:low, 1:high in sleep mode           */
-#define _H3800_ASIC1_GPIO_Status        0x4A    /* R   Pin status                                  */
-#define _H3800_ASIC1_GPIO_BattFaultDir  0x4C    /* R/W direction 0:input, 1:output in batt_fault   */
-#define _H3800_ASIC1_GPIO_BattFaultOut  0x4E    /* R/W level 0:low, 1:high in batt_fault           */
-
-#define H3800_ASIC1_GPIO_Mask         H3800_ASIC1_OFFSET( u16, GPIO, Mask )
-#define H3800_ASIC1_GPIO_Direction    H3800_ASIC1_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC1_GPIO_Out          H3800_ASIC1_OFFSET( u16, GPIO, Out )
-#define H3800_ASIC1_GPIO_TriggerType  H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
-#define H3800_ASIC1_GPIO_EdgeTrigger  H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
-#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
-#define H3800_ASIC1_GPIO_LevelStatus  H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
-#define H3800_ASIC1_GPIO_EdgeStatus   H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
-#define H3800_ASIC1_GPIO_State        H3800_ASIC1_OFFSET(  u8, GPIO, State )
-#define H3800_ASIC1_GPIO_Reset        H3800_ASIC1_OFFSET(  u8, GPIO, Reset )
-#define H3800_ASIC1_GPIO_SleepMask    H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
-#define H3800_ASIC1_GPIO_SleepDir     H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
-#define H3800_ASIC1_GPIO_SleepOut     H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
-#define H3800_ASIC1_GPIO_Status       H3800_ASIC1_OFFSET( u16, GPIO, Status )
-#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
-#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
-
-#define H3800_ASIC1_GPIO_STATE_MASK            (1 << 0)
-#define H3800_ASIC1_GPIO_STATE_DIRECTION       (1 << 1)
-#define H3800_ASIC1_GPIO_STATE_OUT             (1 << 2)
-#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE    (1 << 3)
-#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER    (1 << 4)
-#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER   (1 << 5)
-
-#define H3800_ASIC1_GPIO_RESET_SOFTWARE        (1 << 0)
-#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP      (1 << 1)
-#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON    (1 << 2)
-
-/* These are all outputs */
-#define GPIO_H3800_ASIC1_IR_ON_N          (1 << 0)   /* Apply power to the IR Module */
-#define GPIO_H3800_ASIC1_SD_PWR_ON        (1 << 1)   /* Secure Digital power on */
-#define GPIO_H3800_ASIC1_RS232_ON         (1 << 2)   /* Turn on power to the RS232 chip ? */
-#define GPIO_H3800_ASIC1_PULSE_GEN        (1 << 3)   /* Goes to speaker / earphone */
-#define GPIO_H3800_ASIC1_CH_TIMER         (1 << 4)   /* */
-#define GPIO_H3800_ASIC1_LCD_5V_ON        (1 << 5)   /* Enables LCD_5V */
-#define GPIO_H3800_ASIC1_LCD_ON           (1 << 6)   /* Enables LCD_3V */
-#define GPIO_H3800_ASIC1_LCD_PCI          (1 << 7)   /* Connects to PDWN on LCD controller */
-#define GPIO_H3800_ASIC1_VGH_ON           (1 << 8)   /* Drives VGH on the LCD (+9??) */
-#define GPIO_H3800_ASIC1_VGL_ON           (1 << 9)   /* Drivers VGL on the LCD (-6??) */
-#define GPIO_H3800_ASIC1_FL_PWR_ON        (1 << 10)  /* Frontlight power on */
-#define GPIO_H3800_ASIC1_BT_PWR_ON        (1 << 11)  /* Bluetooth power on */
-#define GPIO_H3800_ASIC1_SPK_ON           (1 << 12)  /* */
-#define GPIO_H3800_ASIC1_EAR_ON_N         (1 << 13)  /* */
-#define GPIO_H3800_ASIC1_AUD_PWR_ON       (1 << 14)  /* */
-
-/* Write enable for the flash */
-
-#define _H3800_ASIC1_FlashWP_Base         0x1F00
-#define _H3800_ASIC1_FlashWP_VPP_ON         0x00    /* R   1: write, 0: protect */
-#define H3800_ASIC1_FlashWP_VPP_ON       H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
deleted file mode 100644
index 1abd7cfc8bce..000000000000
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/hardware.h
- *
- * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware definitions for SA1100 architecture
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for SA1111 added.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define UNCACHEABLE_ADDR	0xfa050000
-
-
-/*
- * SA1100 internal I/O mappings
- *
- * We have the following mapping:
- *      phys            virt
- *      80000000        f8000000
- *      90000000        fa000000
- *      a0000000        fc000000
- *      b0000000        fe000000
- */
-
-#define VIO_BASE        0xf8000000	/* virtual start of IO space */
-#define VIO_SHIFT       3		/* x = IO space shrink power */
-#define PIO_START       0x80000000	/* physical start of IO space */
-
-#define io_p2v( x )             \
-   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
-#define io_v2p( x )             \
-   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
-
-#ifndef __ASSEMBLY__
-
-# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
-# define __PREG(x)	(io_v2p((unsigned long)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#include "SA-1100.h"
-
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h
deleted file mode 100644
index b14cbda01dc3..000000000000
--- a/include/asm-arm/arch-sa1100/ide.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/ide.h
- *
- * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
- *
- * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *              Get rid of the special ide_init_hwif_ports() functions
- *              and make a generalised function that can be used by all
- *              architectures.
- */
-
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-#error "This code is broken and needs update to match with current ide support"
-
-
-/*
- * Set up a hw structure for a specified data port, control port and IRQ.
- * This should follow whatever the default interface uses.
- */
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
-				       unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	int i;
-	int regincr = 1;
-
-	/* The Empeg board has the first two address lines unused */
-	if (machine_is_empeg())
-		regincr = 1 << 2;
-
-	/* The LART doesn't use A0 for IDE */
-	if (machine_is_lart())
-		regincr = 1 << 1;
-
-	memset(hw, 0, sizeof(*hw));
-
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = reg;
-		reg += regincr;
-	}
-
-	hw->io_ports.ctl_addr = ctrl_port;
-
-	if (irq)
-		*irq = 0;
-}
-
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-    if (machine_is_lart()) {
-#ifdef CONFIG_SA1100_LART
-        hw_regs_t hw;
-
-        /* Enable GPIO as interrupt line */
-        GPDR &= ~LART_GPIO_IDE;
-	set_irq_type(LART_IRQ_IDE, IRQT_RISING);
-
-        /* set PCMCIA interface timing */
-        MECR = 0x00060006;
-
-        /* init the interface */
-	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
-        hw.irq = LART_IRQ_IDE;
-        ide_register_hw(&hw);
-#endif
-    }
-}
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
deleted file mode 100644
index 0756269404b1..000000000000
--- a/include/asm-arm/arch-sa1100/io.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/io.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many 
- * drivers out there that might just work if we fake them...
- */
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)			__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
deleted file mode 100644
index 7bf80484bb77..000000000000
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/irqs.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
- * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
- *
- * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
- */
-
-#define	IRQ_GPIO0		0
-#define	IRQ_GPIO1		1
-#define	IRQ_GPIO2		2
-#define	IRQ_GPIO3		3
-#define	IRQ_GPIO4		4
-#define	IRQ_GPIO5		5
-#define	IRQ_GPIO6		6
-#define	IRQ_GPIO7		7
-#define	IRQ_GPIO8		8
-#define	IRQ_GPIO9		9
-#define	IRQ_GPIO10		10
-#define	IRQ_GPIO11_27		11
-#define	IRQ_LCD  		12	/* LCD controller           */
-#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
-#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
-#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
-#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
-#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
-#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
-#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
-#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
-#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
-#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
-#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
-#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
-#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
-#define	IRQ_OST0 		26	/* OS Timer match 0         */
-#define	IRQ_OST1 		27	/* OS Timer match 1         */
-#define	IRQ_OST2 		28	/* OS Timer match 2         */
-#define	IRQ_OST3 		29	/* OS Timer match 3         */
-#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
-#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
-
-#define	IRQ_GPIO11		32
-#define	IRQ_GPIO12		33
-#define	IRQ_GPIO13		34
-#define	IRQ_GPIO14		35
-#define	IRQ_GPIO15		36
-#define	IRQ_GPIO16		37
-#define	IRQ_GPIO17		38
-#define	IRQ_GPIO18		39
-#define	IRQ_GPIO19		40
-#define	IRQ_GPIO20		41
-#define	IRQ_GPIO21		42
-#define	IRQ_GPIO22		43
-#define	IRQ_GPIO23		44
-#define	IRQ_GPIO24		45
-#define	IRQ_GPIO25		46
-#define	IRQ_GPIO26		47
-#define	IRQ_GPIO27		48
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.  IRQs 49 to 64 are available.
- */
-#define IRQ_BOARD_START		49
-#define IRQ_BOARD_END		65
-
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS			(IRQ_BOARD_END)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
-#else
-#define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
-#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
-#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
-#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT    9
-
-#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT    5
diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h
deleted file mode 100644
index 45d2bb59f9d0..000000000000
--- a/include/asm-arm/arch-sa1100/jornada720.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-arm/arch-sa1100/jornada720.h
- *
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
- *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- /* HP Jornada 7xx microprocessor commands */
-#define GETBATTERYDATA		0xc0
-#define GETSCANKEYCODE		0x90
-#define GETTOUCHSAMPLES		0xa0
-#define GETCONTRAST		0xD0
-#define SETCONTRAST		0xD1
-#define GETBRIGHTNESS		0xD2
-#define SETBRIGHTNESS		0xD3
-#define CONTRASTOFF		0xD8
-#define BRIGHTNESSOFF		0xD9
-#define PWMOFF			0xDF
-#define TXDUMMY			0x11
-#define ERRORCODE		0x00
diff --git a/include/asm-arm/arch-sa1100/lart.h b/include/asm-arm/arch-sa1100/lart.h
deleted file mode 100644
index 8a5482d908db..000000000000
--- a/include/asm-arm/arch-sa1100/lart.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _INCLUDE_LART_H
-#define _INCLUDE_LART_H
-
-#define LART_GPIO_ETH0			GPIO_GPIO0
-#define LART_IRQ_ETH0			IRQ_GPIO0
-
-#define LART_GPIO_IDE			GPIO_GPIO1
-#define LART_IRQ_IDE			IRQ_GPIO1
-
-#define LART_GPIO_UCB1200		GPIO_GPIO18
-#define LART_IRQ_UCB1200		IRQ_GPIO18
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h
deleted file mode 100644
index f58a22755c61..000000000000
--- a/include/asm-arm/arch-sa1100/mcp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-sa1100/mcp.h
- *
- *  Copyright (C) 2005 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
-
-#include <linux/types.h>
-
-struct mcp_plat_data {
-	u32 mccr0;
-	u32 mccr1;
-	unsigned int sclk_rate;
-};
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h
deleted file mode 100644
index 0e907fc6d42a..000000000000
--- a/include/asm-arm/arch-sa1100/memory.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/memory.h
- *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset is 0xc0000000 on the SA1100
- */
-#define PHYS_OFFSET	UL(0xc0000000)
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
-#define arch_adjust_zones(node, size, holes) \
-	sa1111_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
-
-#endif
-#endif
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *		address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *		to an address that the kernel can use.
- *
- * On the SA1100, bus addresses are equivalent to physical addresses.
- */
-#define __virt_to_bus(x)	 __virt_to_phys(x)
-#define __bus_to_virt(x)	 __phys_to_virt(x)
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much convenient to use Linux's NUMA support to implement our 
- * memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define NODE_MEM_SIZE_BITS	27
-
-/*
- * Cache flushing area - SA1100 zero bank
- */
-#define FLUSH_BASE_PHYS		0xe0000000
-#define FLUSH_BASE		0xf5000000
-#define FLUSH_BASE_MINICACHE	0xf5100000
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/include/asm-arm/arch-sa1100/mtd-xip.h
deleted file mode 100644
index 80cfdac2b944..000000000000
--- a/include/asm-arm/arch-sa1100/mtd-xip.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARCH_SA1100_MTD_XIP_H__
-#define __ARCH_SA1100_MTD_XIP_H__
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-sa1100/neponset.h b/include/asm-arm/arch-sa1100/neponset.h
deleted file mode 100644
index 09ec9e2bd182..000000000000
--- a/include/asm-arm/arch-sa1100/neponset.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/neponset.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_NEPONSET_H
-#define __ASM_ARCH_NEPONSET_H
-
-/*
- * Neponset definitions: 
- */
-
-#define NEPONSET_CPLD_BASE      (0x10000000)
-#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
-#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
-
-#define _IRR                    0x10000024      /* Interrupt Reason Register */
-#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
-#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
-#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
-#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
-#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
-#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
-#define _SWPK                   0x10000020      /* Switch pack (RO)          */
-#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
-
-#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
-
-#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
-#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
-#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
-#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
-#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
-#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
-#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
-#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
-#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
-
-#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
-
-#define IRR_ETHERNET		(1<<0)
-#define IRR_USAR		(1<<1)
-#define IRR_SA1111		(1<<2)
-
-#define AUD_SEL_1341            (1<<0)
-#define AUD_MUTE_1341           (1<<1)
-
-#define MDM_CTL0_RTS1		(1 << 0)
-#define MDM_CTL0_DTR1		(1 << 1)
-#define MDM_CTL0_RTS2		(1 << 2)
-#define MDM_CTL0_DTR2		(1 << 3)
-
-#define MDM_CTL1_CTS1		(1 << 0)
-#define MDM_CTL1_DSR1		(1 << 1)
-#define MDM_CTL1_DCD1		(1 << 2)
-#define MDM_CTL1_CTS2		(1 << 3)
-#define MDM_CTL1_DSR2		(1 << 4)
-#define MDM_CTL1_DCD2		(1 << 5)
-
-#define NCR_GP01_OFF		(1<<0)
-#define NCR_TP_PWR_EN		(1<<1)
-#define NCR_MS_PWR_EN		(1<<2)
-#define NCR_ENET_OSC_EN		(1<<3)
-#define NCR_SPI_KB_WK_UP	(1<<4)
-#define NCR_A0VPP		(1<<5)
-#define NCR_A1VPP		(1<<6)
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/shannon.h b/include/asm-arm/arch-sa1100/shannon.h
deleted file mode 100644
index ec27d6e12140..000000000000
--- a/include/asm-arm/arch-sa1100/shannon.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _INCLUDE_SHANNON_H
-#define _INCLUDE_SHANNON_H
-
-/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
- * written by <forsyth@vitanuova.com> */
-
-#define SHANNON_GPIO_SPI_FLASH		GPIO_GPIO (0)	/* Output - Driven low, enables SPI to flash */
-#define SHANNON_GPIO_SPI_DSP		GPIO_GPIO (1)	/* Output - Driven low, enables SPI to DSP */
-/* lcd lower = GPIO 2-9 */
-#define SHANNON_GPIO_SPI_OUTPUT		GPIO_GPIO (10)	/* Output - SPI output to DSP */
-#define SHANNON_GPIO_SPI_INPUT		GPIO_GPIO (11)	/* Input  - SPI input from DSP */
-#define SHANNON_GPIO_SPI_CLOCK		GPIO_GPIO (12)	/* Output - Clock for SPI */
-#define SHANNON_GPIO_SPI_FRAME		GPIO_GPIO (13)	/* Output - Frame marker - not used */
-#define SHANNON_GPIO_SPI_RTS		GPIO_GPIO (14)	/* Input  - SPI Ready to Send */
-#define SHANNON_IRQ_GPIO_SPI_RTS	IRQ_GPIO14
-#define SHANNON_GPIO_SPI_CTS		GPIO_GPIO (15)	/* Output - SPI Clear to Send */
-#define SHANNON_GPIO_IRQ_CODEC		GPIO_GPIO (16)	/* in, irq from ucb1200 */
-#define SHANNON_IRQ_GPIO_IRQ_CODEC	IRQ_GPIO16
-#define SHANNON_GPIO_DSP_RESET		GPIO_GPIO (17)	/* Output - Drive low to reset the DSP */
-#define SHANNON_GPIO_CODEC_RESET	GPIO_GPIO (18)	/* Output - Drive low to reset the UCB1x00 */
-#define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
-#define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
-#define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
-/* XXX GPIO 23 unaccounted for */
-#define SHANNON_GPIO_EJECT_0		GPIO_GPIO (24)	/* in */
-#define SHANNON_IRQ_GPIO_EJECT_0	IRQ_GPIO24
-#define SHANNON_GPIO_EJECT_1		GPIO_GPIO (25)	/* in */
-#define SHANNON_IRQ_GPIO_EJECT_1	IRQ_GPIO25
-#define SHANNON_GPIO_RDY_0		GPIO_GPIO (26)	/* in */
-#define SHANNON_IRQ_GPIO_RDY_0		IRQ_GPIO26
-#define SHANNON_GPIO_RDY_1		GPIO_GPIO (27)	/* in */
-#define SHANNON_IRQ_GPIO_RDY_1		IRQ_GPIO27
-
-/* MCP UCB codec GPIO pins... */
-
-#define SHANNON_UCB_GPIO_BACKLIGHT	9
-#define SHANNON_UCB_GPIO_BRIGHT_MASK  	7
-#define SHANNON_UCB_GPIO_BRIGHT		6
-#define SHANNON_UCB_GPIO_CONTRAST_MASK	0x3f
-#define SHANNON_UCB_GPIO_CONTRAST	0
-
-#endif
diff --git a/include/asm-arm/arch-sa1100/simpad.h b/include/asm-arm/arch-sa1100/simpad.h
deleted file mode 100644
index 034301d23f60..000000000000
--- a/include/asm-arm/arch-sa1100/simpad.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/simpad.h
- *
- * based of assabet.h same as HUW_Webpanel
- *
- * This file contains the hardware specific definitions for SIMpad
- *
- * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
- */
-
-#ifndef __ASM_ARCH_SIMPAD_H
-#define __ASM_ARCH_SIMPAD_H
-
-
-#define GPIO_UART1_RTS	GPIO_GPIO14
-#define GPIO_UART1_DTR	GPIO_GPIO7
-#define GPIO_UART1_CTS	GPIO_GPIO8
-#define GPIO_UART1_DCD	GPIO_GPIO23
-#define GPIO_UART1_DSR	GPIO_GPIO6
-
-#define GPIO_UART3_RTS	GPIO_GPIO12
-#define GPIO_UART3_DTR	GPIO_GPIO16
-#define GPIO_UART3_CTS	GPIO_GPIO13
-#define GPIO_UART3_DCD	GPIO_GPIO18
-#define GPIO_UART3_DSR	GPIO_GPIO17
-
-#define GPIO_POWER_BUTTON	GPIO_GPIO0
-#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
-
-#define IRQ_UART1_CTS	IRQ_GPIO15
-#define IRQ_UART1_DCD	GPIO_GPIO23
-#define IRQ_UART1_DSR	GPIO_GPIO6
-#define IRQ_UART3_CTS	GPIO_GPIO13
-#define IRQ_UART3_DCD	GPIO_GPIO18
-#define IRQ_UART3_DSR	GPIO_GPIO17
-
-#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
-#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
-
-
-/*---  PCMCIA  ---*/
-#define GPIO_CF_CD              GPIO_GPIO24
-#define GPIO_CF_IRQ             GPIO_GPIO1
-#define IRQ_GPIO_CF_IRQ         IRQ_GPIO1
-#define IRQ_GPIO_CF_CD          IRQ_GPIO24
-
-/*--- SmartCard ---*/
-#define GPIO_SMART_CARD		GPIO_GPIO10
-#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
-
-// CS3 Latch is write only, a shadow is necessary
-
-#define CS3BUSTYPE unsigned volatile long
-#define CS3_BASE        0xf1000000
-
-#define VCC_5V_EN       0x0001 // For 5V PCMCIA
-#define VCC_3V_EN       0x0002 // FOR 3.3V PCMCIA
-#define EN1             0x0004 // This is only for EPROM's
-#define EN0             0x0008 // Both should be enable for 3.3V or 5V
-#define DISPLAY_ON      0x0010
-#define PCMCIA_BUFF_DIS 0x0020
-#define MQ_RESET        0x0040
-#define PCMCIA_RESET    0x0080
-#define DECT_POWER_ON   0x0100
-#define IRDA_SD         0x0200 // Shutdown for powersave
-#define RS232_ON        0x0400
-#define SD_MEDIAQ       0x0800 // Shutdown for powersave
-#define LED2_ON         0x1000
-#define IRDA_MODE       0x2000 // Fast/Slow IrDA mode
-#define ENABLE_5V       0x4000 // Enable 5V circuit
-#define RESET_SIMCARD   0x8000
-
-#define RS232_ENABLE    0x0440
-#define PCMCIAMASK      0x402f
-
-
-struct simpad_battery {
-	unsigned char ac_status;	/* line connected yes/no */
-	unsigned char status;		/* battery loading yes/no */
-	unsigned char percentage;	/* percentage loaded */
-	unsigned short life;		/* life till empty */
-};
-
-/* These should match the apm_bios.h definitions */
-#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
-#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
-#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
-#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
-
-/* These bitfields are rarely "or'd" together */
-#define SIMPAD_BATT_STATUS_HIGH          0x01
-#define SIMPAD_BATT_STATUS_LOW           0x02
-#define SIMPAD_BATT_STATUS_CRITICAL      0x04
-#define SIMPAD_BATT_STATUS_CHARGING      0x08
-#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
-#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
-#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
-#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
-#define SIMPAD_BATT_STATUS_NOBATT        0x80
-#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
-
-extern int simpad_get_battery(struct simpad_battery* );
-
-#endif // __ASM_ARCH_SIMPAD_H
-
-
-
-
-
-
-
-
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
deleted file mode 100644
index aef91e3b63fe..000000000000
--- a/include/asm-arm/arch-sa1100/system.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
- */
-#include <asm/hardware.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-		RSRR = RSRR_SWR;
-	}
-}
diff --git a/include/asm-arm/arch-sa1100/timex.h b/include/asm-arm/arch-sa1100/timex.h
deleted file mode 100644
index 837be9b797dd..000000000000
--- a/include/asm-arm/arch-sa1100/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998 
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE		3686400
diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h
deleted file mode 100644
index 17e64d232e7d..000000000000
--- a/include/asm-arm/arch-sa1100/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/uncompress.h
- *
- * (C) 1999 Nicolas Pitre <nico@cam.org>
- *
- * Reorganised to be machine independent.
- */
-
-#include "hardware.h"
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-
-#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = _Ser3UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser1UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser2UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while (!(UART(UTSR1) & UTSR1_TNF))
-		barrier();
-
-	/* send the character out. */
-	UART(UTDR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Nothing to do for these
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h
deleted file mode 100644
index 2fb1c6f3aa1b..000000000000
--- a/include/asm-arm/arch-sa1100/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/vmalloc.h
- */
-#define VMALLOC_END       (0xe8000000)
diff --git a/include/asm-arm/arch-shark/debug-macro.S b/include/asm-arm/arch-shark/debug-macro.S
deleted file mode 100644
index 7cb37f78825e..000000000000
--- a/include/asm-arm/arch-shark/debug-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/include/asm-arm/arch-shark/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x000003f8
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/include/asm-arm/arch-shark/dma.h b/include/asm-arm/arch-shark/dma.h
deleted file mode 100644
index fc985d5e62af..000000000000
--- a/include/asm-arm/arch-shark/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev /  .properties
- * in OpenFirmware.
- */
-#define MAX_DMA_ADDRESS		0xC0400000
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/include/asm-arm/arch-shark/entry-macro.S b/include/asm-arm/arch-shark/entry-macro.S
deleted file mode 100644
index 82463f30f3df..000000000000
--- a/include/asm-arm/arch-shark/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-arm/arch-shark/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xe0000000
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-
diff --git a/include/asm-arm/arch-shark/hardware.h b/include/asm-arm/arch-shark/hardware.h
deleted file mode 100644
index ecba45260898..000000000000
--- a/include/asm-arm/arch-shark/hardware.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE			0xe0000000
-
-#else
-
-#define IO_BASE			0
-
-#endif
-
-#define IO_SIZE			0x08000000
-#define IO_START		0x40000000
-#define ROMCARD_SIZE		0x08000000
-#define ROMCARD_START		0x10000000
-
-#define PCIO_BASE		0xe0000000
-
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
-
-#define pcibios_assign_all_busses()     1
-
-#define PCIBIOS_MIN_IO          0x6000
-#define PCIBIOS_MIN_MEM         0x50000000
-#define PCIMEM_BASE		0xe8000000
-
-#endif
-
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
deleted file mode 100644
index 87ffa27f2962..000000000000
--- a/include/asm-arm/arch-shark/io.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
- * and are translated to the start of IO.
- */
-#define __PORT_PCIO(x)	(!((x) & 0x80000000))
-
-#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
-
-
-static inline unsigned int __ioaddr (unsigned int port)			\
-{										\
-	if (__PORT_PCIO(port))							\
-		return (unsigned int)(PCIO_BASE + (port));			\
-	else									\
-		return (unsigned int)(IO_BASE + (port));			\
-}
-
-#define __mem_pci(addr) (addr)
-
-/*
- * Translated address IO functions
- *
- * IO address has already been translated to a virtual address
- */
-#define outb_t(v,p)								\
-	(*(volatile unsigned char *)(p) = (v))
-
-#define inb_t(p)								\
-	(*(volatile unsigned char *)(p))
-
-#define outl_t(v,p)								\
-	(*(volatile unsigned long *)(p) = (v))
-
-#define inl_t(p)								\
-	(*(volatile unsigned long *)(p))
-
-#endif
diff --git a/include/asm-arm/arch-shark/irqs.h b/include/asm-arm/arch-shark/irqs.h
deleted file mode 100644
index b36cc975b290..000000000000
--- a/include/asm-arm/arch-shark/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define RTC_IRQ			 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14
diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h
deleted file mode 100644
index 6968d6103ea0..000000000000
--- a/include/asm-arm/arch-shark/memory.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa110/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET     UL(0x08000000)
-
-#ifndef __ASSEMBLY__
-
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
-{
-  if (node != 0) return;
-  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
-  zone_size[1] = zone_size[0] - 1024;
-  zone_size[0] = 1024;
-  zhole_size[1] = zhole_size[0];
-  zhole_size[0] = 0;
-}
-
-#define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
-
-#endif
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/include/asm-arm/arch-shark/system.h b/include/asm-arm/arch-shark/system.h
deleted file mode 100644
index f12d771ab4ce..000000000000
--- a/include/asm-arm/arch-shark/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/io.h>
-
-static void arch_reset(char mode)
-{
-	short temp;
-	local_irq_disable();
-	/* Reset the Machine via pc[3] of the sequoia chipset */
-	outw(0x09,0x24);
-	temp=inw(0x26);
-	temp = temp | (1<<3) | (1<<10);
-	outw(0x09,0x24);
-	outw(temp,0x26);
-
-}
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/include/asm-arm/arch-shark/timex.h b/include/asm-arm/arch-shark/timex.h
deleted file mode 100644
index 0d02d255513b..000000000000
--- a/include/asm-arm/arch-shark/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h
deleted file mode 100644
index 7eca6534f1bb..000000000000
--- a/include/asm-arm/arch-shark/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * linux/include/asm-arm/arch-ebsa285/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h
deleted file mode 100644
index fac37c636b38..000000000000
--- a/include/asm-arm/arch-shark/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
deleted file mode 100644
index fe106d184e62..000000000000
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/include/asm-arm/arch-versatile/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf1000000	@ virtual base
-		orr	\rx, \rx, #0x001F0000
-		orr	\rx, \rx, #0x00001000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h
deleted file mode 100644
index 642577348623..000000000000
--- a/include/asm-arm/arch-versatile/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/dma.h
- *
- *  Copyright (C) 2003 ARM Limited.
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
deleted file mode 100644
index 924d1a8fe360..000000000000
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-versatile/entry-macro.S
- *
- * Low-level IRQ helper macros for Versatile platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <asm/hardware.h>
-#include <asm/hardware/vic.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
-		mov	\irqnr, #0
-		teq	\irqstat, #0
-		beq	1003f
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-
-@		clz	\irqnr, \irqstat
-@1003:		/* EQ will be set if we reach MAXIRQNUM */
-		.endm
-
diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h
deleted file mode 100644
index edc06598d187..000000000000
--- a/include/asm-arm/arch-versatile/hardware.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/hardware.h
- *
- *  This file contains the hardware definitions of the Versatile boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/platform.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-
-#if 0
-#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
-#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
-#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
-
-#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
-#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
-#endif
-
-/* CIK guesswork */
-#define PCIBIOS_MIN_IO			0x44000000
-#define PCIBIOS_MIN_MEM			0x50000000
-
-#define pcibios_assign_all_busses()     1
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h
deleted file mode 100644
index c4d01948e00b..000000000000
--- a/include/asm-arm/arch-versatile/io.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/io.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#define __io(a)	__io(a)
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h
deleted file mode 100644
index f7263b99403b..000000000000
--- a/include/asm-arm/arch-versatile/irqs.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <asm/arch/platform.h>
-
-/* 
- *  IRQ interrupts definitions are the same as the INT definitions
- *  held within platform.h
- */
-#define IRQ_VIC_START		0
-#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END		(IRQ_VIC_START + 31)
-
-#define IRQMASK_WDOGINT		INTMASK_WDOGINT
-#define IRQMASK_SOFTINT		INTMASK_SOFTINT
-#define IRQMASK_COMMRx 		INTMASK_COMMRx
-#define IRQMASK_COMMTx 		INTMASK_COMMTx
-#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define IRQMASK_RTCINT 		INTMASK_RTCINT
-#define IRQMASK_SSPINT 		INTMASK_SSPINT
-#define IRQMASK_UARTINT0	INTMASK_UARTINT0
-#define IRQMASK_UARTINT1	INTMASK_UARTINT1
-#define IRQMASK_UARTINT2	INTMASK_UARTINT2
-#define IRQMASK_SCIINT 		INTMASK_SCIINT
-#define IRQMASK_CLCDINT		INTMASK_CLCDINT
-#define IRQMASK_DMAINT 		INTMASK_DMAINT
-#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define IRQMASK_MBXINT 		INTMASK_MBXINT
-#define IRQMASK_GNDINT 		INTMASK_GNDINT
-#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
-/* 
- *  FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT		INT_WDOGINT
-#define FIQ_SOFTINT		INT_SOFTINT
-#define FIQ_COMMRx		INT_COMMRx
-#define FIQ_COMMTx		INT_COMMTx
-#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
-#define FIQ_GPIOINT0		INT_GPIOINT0
-#define FIQ_GPIOINT1		INT_GPIOINT1
-#define FIQ_GPIOINT2		INT_GPIOINT2
-#define FIQ_GPIOINT3		INT_GPIOINT3
-#define FIQ_RTCINT		INT_RTCINT
-#define FIQ_SSPINT		INT_SSPINT
-#define FIQ_UARTINT0		INT_UARTINT0
-#define FIQ_UARTINT1		INT_UARTINT1
-#define FIQ_UARTINT2		INT_UARTINT2
-#define FIQ_SCIINT		INT_SCIINT
-#define FIQ_CLCDINT		INT_CLCDINT
-#define FIQ_DMAINT		INT_DMAINT
-#define FIQ_PWRFAILINT 		INT_PWRFAILINT
-#define FIQ_MBXINT		INT_MBXINT
-#define FIQ_GNDINT		INT_GNDINT
-#define FIQ_VICSOURCE21		INT_VICSOURCE21
-#define FIQ_VICSOURCE22		INT_VICSOURCE22
-#define FIQ_VICSOURCE23		INT_VICSOURCE23
-#define FIQ_VICSOURCE24		INT_VICSOURCE24
-#define FIQ_VICSOURCE25		INT_VICSOURCE25
-#define FIQ_VICSOURCE26		INT_VICSOURCE26
-#define FIQ_VICSOURCE27		INT_VICSOURCE27
-#define FIQ_VICSOURCE28		INT_VICSOURCE28
-#define FIQ_VICSOURCE29		INT_VICSOURCE29
-#define FIQ_VICSOURCE30		INT_VICSOURCE30
-#define FIQ_VICSOURCE31		INT_VICSOURCE31
-
-
-#define FIQMASK_WDOGINT		INTMASK_WDOGINT
-#define FIQMASK_SOFTINT		INTMASK_SOFTINT
-#define FIQMASK_COMMRx 		INTMASK_COMMRx
-#define FIQMASK_COMMTx 		INTMASK_COMMTx
-#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
-#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
-#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
-#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
-#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
-#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
-#define FIQMASK_RTCINT 		INTMASK_RTCINT
-#define FIQMASK_SSPINT 		INTMASK_SSPINT
-#define FIQMASK_UARTINT0	INTMASK_UARTINT0
-#define FIQMASK_UARTINT1	INTMASK_UARTINT1
-#define FIQMASK_UARTINT2	INTMASK_UARTINT2
-#define FIQMASK_SCIINT 		INTMASK_SCIINT
-#define FIQMASK_CLCDINT		INTMASK_CLCDINT
-#define FIQMASK_DMAINT 		INTMASK_DMAINT
-#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
-#define FIQMASK_MBXINT 		INTMASK_MBXINT
-#define FIQMASK_GNDINT 		INTMASK_GNDINT
-#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
-#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
-#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
-#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
-#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
-#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
-#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
-#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
-#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
-#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
-#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START		32
-#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END		63
-
-#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
-#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
-#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
-#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
-#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
-#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
-#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
-#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
-#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
-#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
-#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
-#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
-#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
-#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
-#define SIC_IRQMASK_USB		SIC_INTMASK_USB
-#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
-#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
-#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
-#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
-
-#define NR_IRQS			64
diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h
deleted file mode 100644
index a9370976cc5e..000000000000
--- a/include/asm-arm/arch-versatile/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-
-#endif
diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h
deleted file mode 100644
index 2af9d7c9c63c..000000000000
--- a/include/asm-arm/arch-versatile/platform.h
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __address_h
-#define __address_h                     1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI          0x30000000
-#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
-#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
-
-#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE           SZ_2M
-
-#define VERSATILE_FLASH_BASE           0x34000000
-#define VERSATILE_FLASH_SIZE           SZ_64M
-
-/* 
- *  SDRAM
- */
-#define VERSATILE_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define VERSATILE_SYS_ID_OFFSET               0x00
-#define VERSATILE_SYS_SW_OFFSET               0x04
-#define VERSATILE_SYS_LED_OFFSET              0x08
-#define VERSATILE_SYS_OSC0_OFFSET             0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x10
-#define VERSATILE_SYS_OSC2_OFFSET             0x14
-#define VERSATILE_SYS_OSC3_OFFSET             0x18
-#define VERSATILE_SYS_OSC4_OFFSET             0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_100HZ_OFFSET            0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET            0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
-#define VERSATILE_SYS_PCICTL_OFFSET           0x44
-#define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_FLASH_OFFSET            0x4C
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
-#define VERSATILE_SYS_24MHz_OFFSET            0x5C
-#define VERSATILE_SYS_MISC_OFFSET             0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
-
-#define VERSATILE_SYS_BASE                    0x10000000
-#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
-#define VERSATILE_SYS_CTRL_RESET_POR          0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
-
-#define VERSATILE_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
-#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
-#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
-#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
-#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
-#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
-#define VERSATILE_SCI1_BASE            0x1000A000
-#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
-	/* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
-#define VERSATILE_USB_BASE             0x10020000	/* USB */
-	/* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
-#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
-#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
-#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
-                                                /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
-#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
-#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
-#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
-#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
-	/* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
-#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
-#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
-#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
-#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
-#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
-#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE	       0x42000000
-#define VERSATILE_PCI_MEM_BASE0        0x44000000
-#define VERSATILE_PCI_MEM_BASE1        0x50000000
-#define VERSATILE_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE	       0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE             0x2C000000
-#define VERSATILE_DOC_SIZE             (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE        512
-#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0             (1 << 0)
-#define VERSATILE_SYS_LED1             (1 << 1)
-#define VERSATILE_SYS_LED2             (1 << 2)
-#define VERSATILE_SYS_LED3             (1 << 3)
-#define VERSATILE_SYS_LED4             (1 << 4)
-#define VERSATILE_SYS_LED5             (1 << 5)
-#define VERSATILE_SYS_LED6             (1 << 6)
-#define VERSATILE_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  VERSATILE_SYS_LED
-
-/* 
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
-#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- * 
- *  Offsets from interrupt controller base 
- * 
- *  System Controller interrupt controller base is
- * 
- * 	VERSATILE_IC_BASE
- * 
- *  Core Module interrupt controller base is
- * 
- * 	VERSATILE_SYS_IC 
- * 
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS                  0
-#define SIC_IRQ_RAW_STATUS              0x04
-#define SIC_IRQ_ENABLE                  0x08
-#define SIC_IRQ_ENABLE_SET              0x08
-#define SIC_IRQ_ENABLE_CLEAR            0x0C
-#define SIC_INT_SOFT_SET                0x10
-#define SIC_INT_SOFT_CLEAR              0x14
-#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT                     0	/* Watchdog timer */
-#define INT_SOFTINT                     1	/* Software interrupt */
-#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
-#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
-#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
-#define INT_GPIOINT0                    6	/* GPIO 0 */
-#define INT_GPIOINT1                    7	/* GPIO 1 */
-#define INT_GPIOINT2                    8	/* GPIO 2 */
-#define INT_GPIOINT3                    9	/* GPIO 3 */
-#define INT_RTCINT                      10	/* Real Time Clock */
-#define INT_SSPINT                      11	/* Synchronous Serial Port */
-#define INT_UARTINT0                    12	/* UART 0 on development chip */
-#define INT_UARTINT1                    13	/* UART 1 on development chip */
-#define INT_UARTINT2                    14	/* UART 2 on development chip */
-#define INT_SCIINT                      15	/* Smart Card Interface */
-#define INT_CLCDINT                     16	/* CLCD controller */
-#define INT_DMAINT                      17	/* DMA controller */
-#define INT_PWRFAILINT                  18	/* Power failure */
-#define INT_MBXINT                      19	/* Graphics processor */
-#define INT_GNDINT                      20	/* Reserved */
-	/* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21                 21	/* Disk on Chip */
-#define INT_VICSOURCE22                 22	/* MCI0A */
-#define INT_VICSOURCE23                 23	/* MCI1A */
-#define INT_VICSOURCE24                 24	/* AACI */
-#define INT_VICSOURCE25                 25	/* Ethernet */
-#define INT_VICSOURCE26                 26	/* USB */
-#define INT_VICSOURCE27                 27	/* PCI 0 */
-#define INT_VICSOURCE28                 28	/* PCI 1 */
-#define INT_VICSOURCE29                 29	/* PCI 2 */
-#define INT_VICSOURCE30                 30	/* PCI 3 */
-#define INT_VICSOURCE31                 31	/* SIC source */
-
-/* 
- *  Interrupt bit positions
- * 
- */
-#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
-#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
-#define INTMASK_COMMRx                  (1 << INT_COMMRx)
-#define INTMASK_COMMTx                  (1 << INT_COMMTx)
-#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
-#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
-#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
-#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
-#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
-#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
-#define INTMASK_RTCINT                  (1 << INT_RTCINT)
-#define INTMASK_SSPINT                  (1 << INT_SSPINT)
-#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
-#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
-#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
-#define INTMASK_SCIINT                  (1 << INT_SCIINT)
-#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
-#define INTMASK_DMAINT                  (1 << INT_DMAINT)
-#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
-#define INTMASK_MBXINT                  (1 << INT_MBXINT)
-#define INTMASK_GNDINT                  (1 << INT_GNDINT)
-#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
-#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
-#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
-#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
-#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
-#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
-#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
-#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
-#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
-#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
-#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
-
-
-#define VERSATILE_SC_VALID_INT               0x003FFFFF
-
-#define MAXIRQNUM                       31
-#define MAXFIQNUM                       31
-#define MAXSWINUM                       31
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
-#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
-#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3                    5	/* Smart Card interface */
-#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
-#define SIC_INT_CLCD                    7	/* Character LCD */
-#define SIC_INT_TOUCH                   8	/* Touchscreen */
-#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
-	/* 10:20 - reserved */
-#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A                  22	/* MMC 0A */
-#define SIC_INT_MMCI1A                  23	/* MMC 1A */
-#define SIC_INT_AACI                    24	/* Audio Codec */
-#define SIC_INT_ETH                     25	/* Ethernet controller */
-#define SIC_INT_USB                     26	/* USB controller */
-#define SIC_INT_PCI0                    27
-#define SIC_INT_PCI1                    28
-#define SIC_INT_PCI2                    29
-#define SIC_INT_PCI3                    30
-
-
-#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
-#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
-#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
-#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
-#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
-#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
-#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
-#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
-#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
-#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
-#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
-#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
-#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
-#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
-#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
-#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
-#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
-#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
-#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
-/* 
- *  Application Flash
- * 
- */
-#define FLASH_BASE                      VERSATILE_FLASH_BASE
-#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
-#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
-#define FLASH_BLOCK_SIZE                SZ_128K
-
-/* 
- *  Boot Flash
- * 
- */
-#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
-#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
-#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
-
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      EPROM_BASE
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK	0
-#define VERSATILE_TIMCLK	1
-
-#define VERSATILE_TIMER1_EnSel	15
-#define VERSATILE_TIMER2_EnSel	17
-#define VERSATILE_TIMER3_EnSel	19
-#define VERSATILE_TIMER4_EnSel	21
-
-
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-#define VERSATILE_CSR_BASE             0x10000000
-#define VERSATILE_CSR_SIZE             0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
-
-/* 	END */
diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h
deleted file mode 100644
index 71c6254c0d9b..000000000000
--- a/include/asm-arm/arch-versatile/system.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/platform.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	u32 val;
-
-	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
-	val |= 0x105;
-
-	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
-	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
-	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
-}
-
-#endif
diff --git a/include/asm-arm/arch-versatile/timex.h b/include/asm-arm/arch-versatile/timex.h
deleted file mode 100644
index 38fd04fc9141..000000000000
--- a/include/asm-arm/arch-versatile/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/timex.h
- *
- *  Versatile architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h
deleted file mode 100644
index 7215133d0514..000000000000
--- a/include/asm-arm/arch-versatile/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/include/asm-arm/arch-versatile/vmalloc.h
deleted file mode 100644
index ac780df62156..000000000000
--- a/include/asm-arm/arch-versatile/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-versatile/vmalloc.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
deleted file mode 100644
index 911393b2c6f0..000000000000
--- a/include/asm-arm/assembler.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  linux/include/asm-arm/assembler.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains arm architecture specific defines
- *  for the different processors.
- *
- *  Do not include any C declarations in this file - it is included by
- *  assembler source.
- */
-#ifndef __ASSEMBLY__
-#error "Only include this from assembly code"
-#endif
-
-#include <asm/ptrace.h>
-
-/*
- * Endian independent macros for shifting bytes within registers.
- */
-#ifndef __ARMEB__
-#define pull            lsr
-#define push            lsl
-#define get_byte_0      lsl #0
-#define get_byte_1	lsr #8
-#define get_byte_2	lsr #16
-#define get_byte_3	lsr #24
-#define put_byte_0      lsl #0
-#define put_byte_1	lsl #8
-#define put_byte_2	lsl #16
-#define put_byte_3	lsl #24
-#else
-#define pull            lsl
-#define push            lsr
-#define get_byte_0	lsr #24
-#define get_byte_1	lsr #16
-#define get_byte_2	lsr #8
-#define get_byte_3      lsl #0
-#define put_byte_0	lsl #24
-#define put_byte_1	lsl #16
-#define put_byte_2	lsl #8
-#define put_byte_3      lsl #0
-#endif
-
-/*
- * Data preload for architectures that support it
- */
-#if __LINUX_ARM_ARCH__ >= 5
-#define PLD(code...)	code
-#else
-#define PLD(code...)
-#endif
-
-/*
- * This can be used to enable code to cacheline align the destination
- * pointer when bulk writing to memory.  Experiments on StrongARM and
- * XScale didn't show this a worthwhile thing to do when the cache is not
- * set to write-allocate (this would need further testing on XScale when WA
- * is used).
- *
- * On Feroceon there is much to gain however, regardless of cache mode.
- */
-#ifdef CONFIG_CPU_FEROCEON
-#define CALGN(code...) code
-#else
-#define CALGN(code...)
-#endif
-
-/*
- * Enable and disable interrupts
- */
-#if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
-	cpsid	i
-	.endm
-
-	.macro	enable_irq
-	cpsie	i
-	.endm
-#else
-	.macro	disable_irq
-	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
-	.endm
-
-	.macro	enable_irq
-	msr	cpsr_c, #SVC_MODE
-	.endm
-#endif
-
-/*
- * Save the current IRQ state and disable IRQs.  Note that this macro
- * assumes FIQs are enabled, and that the processor is in SVC mode.
- */
-	.macro	save_and_disable_irqs, oldcpsr
-	mrs	\oldcpsr, cpsr
-	disable_irq
-	.endm
-
-/*
- * Restore interrupt state previously stored in a register.  We don't
- * guarantee that this will preserve the flags.
- */
-	.macro	restore_irqs, oldcpsr
-	msr	cpsr_c, \oldcpsr
-	.endm
-
-#define USER(x...)				\
-9999:	x;					\
-	.section __ex_table,"a";		\
-	.align	3;				\
-	.long	9999b,9001f;			\
-	.previous
diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h
deleted file mode 100644
index 3b59f94b5a3d..000000000000
--- a/include/asm-arm/atomic.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- *  linux/include/asm-arm/atomic.h
- *
- *  Copyright (C) 1996 Russell King.
- *  Copyright (C) 2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ATOMIC_H
-#define __ASM_ARM_ATOMIC_H
-
-#include <linux/compiler.h>
-#include <asm/system.h>
-
-typedef struct { volatile int counter; } atomic_t;
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-#define atomic_read(v)	((v)->counter)
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-/*
- * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
- * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
- */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-
-	return result;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-
-	return result;
-}
-
-static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
-{
-	unsigned long oldval, res;
-
-	do {
-		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%2]\n"
-		"mov	%0, #0\n"
-		"teq	%1, %3\n"
-		"strexeq %0, %4, [%2]\n"
-		    : "=&r" (res), "=&r" (oldval)
-		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
-		    : "cc");
-	} while (res);
-
-	return oldval;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%2]\n"
-"	bic	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (addr), "Ir" (mask)
-	: "cc");
-}
-
-#else /* ARM_ARCH_6 */
-
-#include <asm/system.h>
-
-#ifdef CONFIG_SMP
-#error SMP not supported on pre-ARMv6 CPUs
-#endif
-
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	raw_local_irq_save(flags);
-	val = v->counter;
-	v->counter = val += i;
-	raw_local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	raw_local_irq_save(flags);
-	val = v->counter;
-	v->counter = val -= i;
-	raw_local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	raw_local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	*addr &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
-#endif /* __LINUX_ARM_ARCH__ */
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-
-	c = atomic_read(v);
-	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
-		c = old;
-	return c != u;
-}
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_add(i, v)	(void) atomic_add_return(i, v)
-#define atomic_inc(v)		(void) atomic_add_return(1, v)
-#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
-#define atomic_dec(v)		(void) atomic_sub_return(1, v)
-
-#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
-#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
-#define atomic_inc_return(v)    (atomic_add_return(1, v))
-#define atomic_dec_return(v)    (atomic_sub_return(1, v))
-#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
-
-#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif
-#endif
diff --git a/include/asm-arm/auxvec.h b/include/asm-arm/auxvec.h
deleted file mode 100644
index c0536f6b29a7..000000000000
--- a/include/asm-arm/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMARM_AUXVEC_H
-#define __ASMARM_AUXVEC_H
-
-#endif
diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h
deleted file mode 100644
index 5c60bfc1a84d..000000000000
--- a/include/asm-arm/bitops.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * Copyright 1995, Russell King.
- * Various bits and pieces copyrights include:
- *  Linus Torvalds (test_bit).
- * Big endian support: Copyright 2001, Nicolas Pitre
- *  reworked by rmk.
- *
- * bit 0 is the LSB of an "unsigned long" quantity.
- *
- * Please note that the code in this file should never be included
- * from user space.  Many of these are not implemented in assembler
- * since they would be too costly.  Also, they require privileged
- * instructions (which are not available from user mode) to ensure
- * that they are atomic.
- */
-
-#ifndef __ASM_ARM_BITOPS_H
-#define __ASM_ARM_BITOPS_H
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/system.h>
-
-#define smp_mb__before_clear_bit()	mb()
-#define smp_mb__after_clear_bit()	mb()
-
-/*
- * These functions are the basis of our bit ops.
- *
- * First, the atomic bitops. These use native endian.
- */
-static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p |= mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p ^= mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline int
-____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res | mask;
-	raw_local_irq_restore(flags);
-
-	return res & mask;
-}
-
-static inline int
-____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res & ~mask;
-	raw_local_irq_restore(flags);
-
-	return res & mask;
-}
-
-static inline int
-____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res ^ mask;
-	raw_local_irq_restore(flags);
-
-	return res & mask;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-/*
- *  A note about Endian-ness.
- *  -------------------------
- *
- * When the ARM is put into big endian mode via CR15, the processor
- * merely swaps the order of bytes within words, thus:
- *
- *          ------------ physical data bus bits -----------
- *          D31 ... D24  D23 ... D16  D15 ... D8  D7 ... D0
- * little     byte 3       byte 2       byte 1      byte 0
- * big        byte 0       byte 1       byte 2      byte 3
- *
- * This means that reading a 32-bit word at address 0 returns the same
- * value irrespective of the endian mode bit.
- *
- * Peripheral devices should be connected with the data bus reversed in
- * "Big Endian" mode.  ARM Application Note 61 is applicable, and is
- * available from http://www.arm.com/.
- *
- * The following assumes that the data bus connectivity for big endian
- * mode has been followed.
- *
- * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
- */
-
-/*
- * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
- */
-extern void _set_bit_le(int nr, volatile unsigned long * p);
-extern void _clear_bit_le(int nr, volatile unsigned long * p);
-extern void _change_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
-extern int _find_first_zero_bit_le(const void * p, unsigned size);
-extern int _find_next_zero_bit_le(const void * p, int size, int offset);
-extern int _find_first_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
-
-/*
- * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
- */
-extern void _set_bit_be(int nr, volatile unsigned long * p);
-extern void _clear_bit_be(int nr, volatile unsigned long * p);
-extern void _change_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
-extern int _find_first_zero_bit_be(const void * p, unsigned size);
-extern int _find_next_zero_bit_be(const void * p, int size, int offset);
-extern int _find_first_bit_be(const unsigned long *p, unsigned size);
-extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
-
-#ifndef CONFIG_SMP
-/*
- * The __* form of bitops are non-atomic and may be reordered.
- */
-#define	ATOMIC_BITOP_LE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_le(nr,p))
-
-#define	ATOMIC_BITOP_BE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_be(nr,p))
-#else
-#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
-#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
-#endif
-
-#define NONATOMIC_BITOP(name,nr,p)		\
-	(____nonatomic_##name(nr, p))
-
-#ifndef __ARMEB__
-/*
- * These are the little endian, atomic definitions.
- */
-#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
-#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
-#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
-#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
-#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
-
-#define WORD_BITOFF_TO_LE(x)		((x))
-
-#else
-
-/*
- * These are the big endian, atomic definitions.
- */
-#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
-#define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
-#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
-#define find_first_bit(p,sz)		_find_first_bit_be(p,sz)
-#define find_next_bit(p,sz,off)		_find_next_bit_be(p,sz,off)
-
-#define WORD_BITOFF_TO_LE(x)		((x) ^ 0x18)
-
-#endif
-
-#if __LINUX_ARM_ARCH__ < 5
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/ffs.h>
-
-#else
-
-static inline int constant_fls(int x)
-{
-	int r = 32;
-
-	if (!x)
-		return 0;
-	if (!(x & 0xffff0000u)) {
-		x <<= 16;
-		r -= 16;
-	}
-	if (!(x & 0xff000000u)) {
-		x <<= 8;
-		r -= 8;
-	}
-	if (!(x & 0xf0000000u)) {
-		x <<= 4;
-		r -= 4;
-	}
-	if (!(x & 0xc0000000u)) {
-		x <<= 2;
-		r -= 2;
-	}
-	if (!(x & 0x80000000u)) {
-		x <<= 1;
-		r -= 1;
-	}
-	return r;
-}
-
-/*
- * On ARMv5 and above those functions can be implemented around
- * the clz instruction for much better code efficiency.
- */
-
-#define fls(x) \
-	( __builtin_constant_p(x) ? constant_fls(x) : \
-	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
-#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
-#define __ffs(x) (ffs(x) - 1)
-#define ffz(x) __ffs( ~(x) )
-
-#endif
-
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-/*
- * Ext2 is defined to use little-endian byte ordering.
- * These do not need to be atomic.
- */
-#define ext2_set_bit(nr,p)			\
-		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_set_bit_atomic(lock,nr,p)          \
-                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_clear_bit(nr,p)			\
-		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_clear_bit_atomic(lock,nr,p)        \
-                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_test_bit(nr,p)			\
-		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define ext2_find_first_zero_bit(p,sz)		\
-		_find_first_zero_bit_le(p,sz)
-#define ext2_find_next_zero_bit(p,sz,off)	\
-		_find_next_zero_bit_le(p,sz,off)
-#define ext2_find_next_bit(p, sz, off) \
-		_find_next_bit_le(p, sz, off)
-
-/*
- * Minix is defined to use little-endian byte ordering.
- * These do not need to be atomic.
- */
-#define minix_set_bit(nr,p)			\
-		__set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_bit(nr,p)			\
-		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_and_set_bit(nr,p)		\
-		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_test_and_clear_bit(nr,p)		\
-		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
-#define minix_find_first_zero_bit(p,sz)		\
-		_find_first_zero_bit_le(p,sz)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h
deleted file mode 100644
index 7b62351f097d..000000000000
--- a/include/asm-arm/bug.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASMARM_BUG_H
-#define _ASMARM_BUG_H
-
-
-#ifdef CONFIG_BUG
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-extern void __bug(const char *file, int line) __attribute__((noreturn));
-
-/* give file/line information */
-#define BUG()		__bug(__FILE__, __LINE__)
-
-#else
-
-/* this just causes an oops */
-#define BUG()		(*(int *)0 = 0)
-
-#endif
-
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/include/asm-arm/bugs.h b/include/asm-arm/bugs.h
deleted file mode 100644
index ca54eb0f12d7..000000000000
--- a/include/asm-arm/bugs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-arm/bugs.h
- *
- *  Copyright (C) 1995-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_BUGS_H
-#define __ASM_BUGS_H
-
-#ifdef CONFIG_MMU
-extern void check_writebuffer_bugs(void);
-
-#define check_bugs() check_writebuffer_bugs()
-#else
-#define check_bugs() do { } while (0)
-#endif
-
-#endif
diff --git a/include/asm-arm/byteorder.h b/include/asm-arm/byteorder.h
deleted file mode 100644
index e6f7fcdc73b0..000000000000
--- a/include/asm-arm/byteorder.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  linux/include/asm-arm/byteorder.h
- *
- * ARM Endian-ness.  In little endian mode, the data bus is connected such
- * that byte accesses appear as:
- *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- *
- * When in big endian mode, byte accesses appear as:
- *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- */
-#ifndef __ASM_ARM_BYTEORDER_H
-#define __ASM_ARM_BYTEORDER_H
-
-#include <linux/compiler.h>
-#include <asm/types.h>
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-	__u32 t;
-
-#ifndef __thumb__
-	if (!__builtin_constant_p(x)) {
-		/*
-		 * The compiler needs a bit of a hint here to always do the
-		 * right thing and not screw it up to different degrees
-		 * depending on the gcc version.
-		 */
-		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
-	} else
-#endif
-		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
-
-	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
-	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
-	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
-
-	return x;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#ifdef __ARMEB__
-#include <linux/byteorder/big_endian.h>
-#else
-#include <linux/byteorder/little_endian.h>
-#endif
-
-#endif
-
diff --git a/include/asm-arm/cache.h b/include/asm-arm/cache.h
deleted file mode 100644
index 31332c8ac04e..000000000000
--- a/include/asm-arm/cache.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *  linux/include/asm-arm/cache.h
- */
-#ifndef __ASMARM_CACHE_H
-#define __ASMARM_CACHE_H
-
-#define L1_CACHE_SHIFT		5
-#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-#endif
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
deleted file mode 100644
index 70b0fe724b62..000000000000
--- a/include/asm-arm/cacheflush.h
+++ /dev/null
@@ -1,528 +0,0 @@
-/*
- *  linux/include/asm-arm/cacheflush.h
- *
- *  Copyright (C) 1999-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_CACHEFLUSH_H
-#define _ASMARM_CACHEFLUSH_H
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-
-#include <asm/glue.h>
-#include <asm/shmparam.h>
-
-#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
-
-/*
- *	Cache Model
- *	===========
- */
-#undef _CACHE
-#undef MULTI_CACHE
-
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_ARM926T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm926
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM940T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm940
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM946E)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm946
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4WB)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4wb
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSCALE)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xscale
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSC3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xsc3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_FEROCEON)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_V6)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v6
-//# endif
-#endif
-
-#if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v7
-//# endif
-#endif
-
-#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
-#endif
-
-/*
- * This flag is used to indicate that the page pointed to by a pte
- * is dirty and requires cleaning before returning it to the user.
- */
-#define PG_dcache_dirty PG_arch_1
-
-/*
- *	MM Cache Management
- *	===================
- *
- *	The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files
- *	implement these methods.
- *
- *	Start addresses are inclusive and end addresses are exclusive;
- *	start addresses should be rounded down, end addresses up.
- *
- *	See Documentation/cachetlb.txt for more information.
- *	Please note that the implementation of these, and the required
- *	effects are cache-type (VIVT/VIPT/PIPT) specific.
- *
- *	flush_cache_kern_all()
- *
- *		Unconditionally clean and invalidate the entire cache.
- *
- *	flush_cache_user_mm(mm)
- *
- *		Clean and invalidate all user space cache entries
- *		before a change of page tables.
- *
- *	flush_cache_user_range(start, end, flags)
- *
- *		Clean and invalidate a range of cache entries in the
- *		specified address space before a change of page tables.
- *		- start - user start address (inclusive, page aligned)
- *		- end   - user end address   (exclusive, page aligned)
- *		- flags - vma->vm_flags field
- *
- *	coherent_kern_range(start, end)
- *
- *		Ensure coherency between the Icache and the Dcache in the
- *		region described by start, end.  If you have non-snooping
- *		Harvard caches, you need to implement this function.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	DMA Cache Coherency
- *	===================
- *
- *	dma_inv_range(start, end)
- *
- *		Invalidate (discard) the specified virtual address range.
- *		May not write back any entries.  If 'start' or 'end'
- *		are not cache line aligned, those lines must be written
- *		back.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	dma_clean_range(start, end)
- *
- *		Clean (write back) the specified virtual address range.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	dma_flush_range(start, end)
- *
- *		Clean and invalidate the specified virtual address range.
- *		- start  - virtual start address
- *		- end    - virtual end address
- */
-
-struct cpu_cache_fns {
-	void (*flush_kern_all)(void);
-	void (*flush_user_all)(void);
-	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
-
-	void (*coherent_kern_range)(unsigned long, unsigned long);
-	void (*coherent_user_range)(unsigned long, unsigned long);
-	void (*flush_kern_dcache_page)(void *);
-
-	void (*dma_inv_range)(const void *, const void *);
-	void (*dma_clean_range)(const void *, const void *);
-	void (*dma_flush_range)(const void *, const void *);
-};
-
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
-};
-
-/*
- * Select the calling method
- */
-#ifdef MULTI_CACHE
-
-extern struct cpu_cache_fns cpu_cache;
-
-#define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
-#define __cpuc_flush_user_all		cpu_cache.flush_user_all
-#define __cpuc_flush_user_range		cpu_cache.flush_user_range
-#define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
-#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
-#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
-
-/*
- * These are private to the dma-mapping API.  Do not use directly.
- * Their sole purpose is to ensure that data held in the cache
- * is visible to DMA, or data written by DMA to system memory is
- * visible to the CPU.
- */
-#define dmac_inv_range			cpu_cache.dma_inv_range
-#define dmac_clean_range		cpu_cache.dma_clean_range
-#define dmac_flush_range		cpu_cache.dma_flush_range
-
-#else
-
-#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
-#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
-#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
-#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
-#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
-
-extern void __cpuc_flush_kern_all(void);
-extern void __cpuc_flush_user_all(void);
-extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
-extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
-extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
-extern void __cpuc_flush_dcache_page(void *);
-
-/*
- * These are private to the dma-mapping API.  Do not use directly.
- * Their sole purpose is to ensure that data held in the cache
- * is visible to DMA, or data written by DMA to system memory is
- * visible to the CPU.
- */
-#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
-#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
-extern void dmac_flush_range(const void *, const void *);
-
-#endif
-
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
-/*
- * flush_cache_vmap() is used when creating mappings (eg, via vmap,
- * vmalloc, ioremap etc) in kernel space for pages.  Since the
- * direct-mappings of these pages may contain cached data, we need
- * to do a full cache flush to ensure that writebacks don't corrupt
- * data placed into these pages via the new mappings.
- */
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space.  Really, we want to allow our "user
- * space" model to handle this.
- */
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		memcpy(dst, src, len);				\
-		flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		memcpy(dst, src, len);				\
-	} while (0)
-
-/*
- * Convert calls to our calling convention.
- */
-#define flush_cache_all()		__cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
-{
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
-		__cpuc_flush_user_all();
-}
-
-static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
-{
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
-		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-					vma->vm_flags);
-}
-
-static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
-{
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
-		unsigned long addr = user_addr & PAGE_MASK;
-		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-	}
-}
-
-static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-			 unsigned long uaddr, void *kaddr,
-			 unsigned long len, int write)
-{
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
-		unsigned long addr = (unsigned long)kaddr;
-		__cpuc_coherent_kern_range(addr, addr + len);
-	}
-}
-#else
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-				unsigned long uaddr, void *kaddr,
-				unsigned long len, int write);
-#endif
-
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-
-/*
- * flush_cache_user_range is used when we want to ensure that the
- * Harvard caches are synchronised for the user space address range.
- * This is used for the ARM private sys_cacheflush system call.
- */
-#define flush_cache_user_range(vma,start,end) \
-	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
-
-/*
- * Perform necessary cache operations to ensure that data previously
- * stored within this range of addresses can be executed by the CPU.
- */
-#define flush_icache_range(s,e)		__cpuc_coherent_kern_range(s,e)
-
-/*
- * Perform necessary cache operations to ensure that the TLB will
- * see data written in the specified area.
- */
-#define clean_dcache_area(start,size)	cpu_dcache_clean_area(start, size)
-
-/*
- * flush_dcache_page is used when the kernel has written to the page
- * cache page at virtual address page->virtual.
- *
- * If this page isn't mapped (ie, page_mapping == NULL), or it might
- * have userspace mappings, then we _must_ always clean + invalidate
- * the dcache entries associated with the kernel mapping.
- *
- * Otherwise we can defer the operation, and clean the cache when we are
- * about to change to user space.  This is the same method as used on SPARC64.
- * See update_mmu_cache for the user space part.
- */
-extern void flush_dcache_page(struct page *);
-
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
-static inline void __flush_icache_all(void)
-{
-	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
-	    :
-	    : "r" (0));
-}
-
-#define ARCH_HAS_FLUSH_ANON_PAGE
-static inline void flush_anon_page(struct vm_area_struct *vma,
-			 struct page *page, unsigned long vmaddr)
-{
-	extern void __flush_anon_page(struct vm_area_struct *vma,
-				struct page *, unsigned long);
-	if (PageAnon(page))
-		__flush_anon_page(vma, page, vmaddr);
-}
-
-#define flush_dcache_mmap_lock(mapping) \
-	write_lock_irq(&(mapping)->tree_lock)
-#define flush_dcache_mmap_unlock(mapping) \
-	write_unlock_irq(&(mapping)->tree_lock)
-
-#define flush_icache_user_range(vma,page,addr,len) \
-	flush_dcache_page(page)
-
-/*
- * We don't appear to need to do anything here.  In fact, if we did, we'd
- * duplicate cache flushing elsewhere performed by flush_dcache_page().
- */
-#define flush_icache_page(vma,page)	do { } while (0)
-
-static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
-	unsigned offset, size_t size)
-{
-	const void *start = (void __force *)virt + offset;
-	dmac_inv_range(start, start + size);
-}
-
-#define __cacheid_present(val)			(val != read_cpuid(CPUID_ID))
-#define __cacheid_type_v7(val)			((val & (7 << 29)) == (4 << 29))
-
-#define __cacheid_vivt_prev7(val)		((val & (15 << 25)) != (14 << 25))
-#define __cacheid_vipt_prev7(val)		((val & (15 << 25)) == (14 << 25))
-#define __cacheid_vipt_nonaliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
-#define __cacheid_vipt_aliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
-
-#define __cacheid_vivt(val)			(__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
-#define __cacheid_vipt(val)			(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
-#define __cacheid_vipt_nonaliasing(val)		(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
-#define __cacheid_vipt_aliasing(val)		(__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
-#define __cacheid_vivt_asid_tagged_instr(val)	(__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
-
-#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
-
-#define cache_is_vivt()			1
-#define cache_is_vipt()			0
-#define cache_is_vipt_nonaliasing()	0
-#define cache_is_vipt_aliasing()	0
-#define icache_is_vivt_asid_tagged()	0
-
-#elif defined(CONFIG_CPU_CACHE_VIPT)
-
-#define cache_is_vivt()			0
-#define cache_is_vipt()			1
-#define cache_is_vipt_nonaliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vipt_nonaliasing(__val);			\
-	})
-
-#define cache_is_vipt_aliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vipt_aliasing(__val);				\
-	})
-
-#define icache_is_vivt_asid_tagged()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_vivt_asid_tagged_instr(__val);		\
-	})
-
-#else
-
-#define cache_is_vivt()							\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
-	})
-		
-#define cache_is_vipt()							\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) && __cacheid_vipt(__val);	\
-	})
-
-#define cache_is_vipt_nonaliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vipt_nonaliasing(__val);			\
-	})
-
-#define cache_is_vipt_aliasing()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vipt_aliasing(__val);			\
-	})
-
-#define icache_is_vivt_asid_tagged()					\
-	({								\
-		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
-		__cacheid_present(__val) &&				\
-		 __cacheid_vivt_asid_tagged_instr(__val);		\
-	})
-
-#endif
-
-#endif
diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h
deleted file mode 100644
index eaa0efd8d0d4..000000000000
--- a/include/asm-arm/checksum.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- *  linux/include/asm-arm/checksum.h
- *
- * IP checksum routines
- *
- * Copyright (C) Original authors of ../asm-i386/checksum.h
- * Copyright (C) 1996-1999 Russell King
- */
-#ifndef __ASM_ARM_CHECKSUM_H
-#define __ASM_ARM_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
-
-/*
- * 	Fold a partial checksum without adding pseudo headers
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-	__asm__(
-	"add	%0, %1, %1, ror #16	@ csum_fold"
-	: "=r" (sum)
-	: "r" (sum)
-	: "cc");
-	return (__force __sum16)(~(__force u32)sum >> 16);
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-static inline __sum16
-ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int tmp1;
-	__wsum sum;
-
-	__asm__ __volatile__(
-	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
-	ldr	%3, [%1], #4					\n\
-	sub	%2, %2, #5					\n\
-	adds	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-	adcs	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-1:	adcs	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-	tst	%2, #15			@ do this carefully	\n\
-	subne	%2, %2, #1		@ without destroying	\n\
-	bne	1b			@ the carry flag	\n\
-	adcs	%0, %0, %3					\n\
-	adc	%0, %0, #0"
-	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
-	: "1" (iph), "2" (ihl)
-	: "cc", "memory");
-	return csum_fold(sum);
-}
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
-{
-	__asm__(
-	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
-	adcs	%0, %0, %3					\n"
-#ifdef __ARMEB__
-	"adcs	%0, %0, %4					\n"
-#else
-	"adcs	%0, %0, %4, lsl #8				\n"
-#endif
-	"adcs	%0, %0, %5					\n\
-	adc	%0, %0, #0"
-	: "=&r"(sum)
-	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
-	: "cc");
-	return sum;
-}	
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16
-ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-extern __wsum
-__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len,
-		__be32 proto, __wsum sum);
-
-static inline __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
-		unsigned short proto, __wsum sum)
-{
-	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
-					   htonl(proto), sum));
-}
-#endif
diff --git a/include/asm-arm/cnt32_to_63.h b/include/asm-arm/cnt32_to_63.h
deleted file mode 100644
index 480c873fa746..000000000000
--- a/include/asm-arm/cnt32_to_63.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
- *
- *  Author:	Nicolas Pitre
- *  Created:	December 3, 2006
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-#ifndef __INCLUDE_CNT32_TO_63_H__
-#define __INCLUDE_CNT32_TO_63_H__
-
-#include <linux/compiler.h>
-#include <asm/types.h>
-#include <asm/byteorder.h>
-
-/*
- * Prototype: u64 cnt32_to_63(u32 cnt)
- * Many hardware clock counters are only 32 bits wide and therefore have
- * a relatively short period making wrap-arounds rather frequent.  This
- * is a problem when implementing sched_clock() for example, where a 64-bit
- * non-wrapping monotonic value is expected to be returned.
- *
- * To overcome that limitation, let's extend a 32-bit counter to 63 bits
- * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
- * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
- * memory is used to synchronize with the hardware clock half-period.  When
- * the top bit of both counters (hardware and in memory) differ then the
- * memory is updated with a new value, incrementing it when the hardware
- * counter wraps around.
- *
- * Because a word store in memory is atomic then the incremented value will
- * always be in synch with the top bit indicating to any potential concurrent
- * reader if the value in memory is up to date or not with regards to the
- * needed increment.  And any race in updating the value in memory is harmless
- * as the same value would simply be stored more than once.
- *
- * The only restriction for the algorithm to work properly is that this
- * code must be executed at least once per each half period of the 32-bit
- * counter to properly update the state bit in memory. This is usually not a
- * problem in practice, but if it is then a kernel timer could be scheduled
- * to manage for this code to be executed often enough.
- *
- * Note that the top bit (bit 63) in the returned value should be considered
- * as garbage.  It is not cleared here because callers are likely to use a
- * multiplier on the returned value which can get rid of the top bit
- * implicitly by making the multiplier even, therefore saving on a runtime
- * clear-bit instruction. Otherwise caller must remember to clear the top
- * bit explicitly.
- */
-
-/* this is used only to give gcc a clue about good code generation */
-typedef union {
-	struct {
-#if defined(__LITTLE_ENDIAN)
-		u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
-		u32 hi, lo;
-#endif
-	};
-	u64 val;
-} cnt32_to_63_t;
-
-#define cnt32_to_63(cnt_lo) \
-({ \
-	static volatile u32 __m_cnt_hi = 0; \
-	cnt32_to_63_t __x; \
-	__x.hi = __m_cnt_hi; \
-	__x.lo = (cnt_lo); \
- 	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
-		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
-	__x.val; \
-})
-
-#endif
diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h
deleted file mode 100644
index 3479de9266e5..000000000000
--- a/include/asm-arm/cpu-multi32.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  linux/include/asm-arm/cpu-multi32.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/page.h>
-
-struct mm_struct;
-
-/*
- * Don't change this structure - ASM code
- * relies on it.
- */
-extern struct processor {
-	/* MISC
-	 * get data abort address/flags
-	 */
-	void (*_data_abort)(unsigned long pc);
-	/*
-	 * Retrieve prefetch fault address
-	 */
-	unsigned long (*_prefetch_abort)(unsigned long lr);
-	/*
-	 * Set up any processor specifics
-	 */
-	void (*_proc_init)(void);
-	/*
-	 * Disable any processor specifics
-	 */
-	void (*_proc_fin)(void);
-	/*
-	 * Special stuff for a reset
-	 */
-	void (*reset)(unsigned long addr) __attribute__((noreturn));
-	/*
-	 * Idle the processor
-	 */
-	int (*_do_idle)(void);
-	/*
-	 * Processor architecture specific
-	 */
-	/*
-	 * clean a virtual address range from the
-	 * D-cache without flushing the cache.
-	 */
-	void (*dcache_clean_area)(void *addr, int size);
-
-	/*
-	 * Set the page table
-	 */
-	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
-	/*
-	 * Set a possibly extended PTE.  Non-extended PTEs should
-	 * ignore 'ext'.
-	 */
-	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
-} processor;
-
-#define cpu_proc_init()			processor._proc_init()
-#define cpu_proc_fin()			processor._proc_fin()
-#define cpu_reset(addr)			processor.reset(addr)
-#define cpu_do_idle()			processor._do_idle()
-#define cpu_dcache_clean_area(addr,sz)	processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte_ext(ptep,pte,ext)	processor.set_pte_ext(ptep,pte,ext)
-#define cpu_do_switch_mm(pgd,mm)	processor.switch_mm(pgd,mm)
diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h
deleted file mode 100644
index 0b120ee36091..000000000000
--- a/include/asm-arm/cpu-single.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/include/asm-arm/cpu-single.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/*
- * Single CPU
- */
-#ifdef __STDC__
-#define __catify_fn(name,x)	name##x
-#else
-#define __catify_fn(name,x)	name/**/x
-#endif
-#define __cpu_fn(name,x)	__catify_fn(name,x)
-
-/*
- * If we are supporting multiple CPUs, then we must use a table of
- * function pointers for this lot.  Otherwise, we can optimise the
- * table away.
- */
-#define cpu_proc_init			__cpu_fn(CPU_NAME,_proc_init)
-#define cpu_proc_fin			__cpu_fn(CPU_NAME,_proc_fin)
-#define cpu_reset			__cpu_fn(CPU_NAME,_reset)
-#define cpu_do_idle			__cpu_fn(CPU_NAME,_do_idle)
-#define cpu_dcache_clean_area		__cpu_fn(CPU_NAME,_dcache_clean_area)
-#define cpu_do_switch_mm		__cpu_fn(CPU_NAME,_switch_mm)
-#define cpu_set_pte_ext			__cpu_fn(CPU_NAME,_set_pte_ext)
-
-#include <asm/page.h>
-
-struct mm_struct;
-
-/* declare all the functions as extern */
-extern void cpu_proc_init(void);
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
diff --git a/include/asm-arm/cpu.h b/include/asm-arm/cpu.h
deleted file mode 100644
index 715426b9b08e..000000000000
--- a/include/asm-arm/cpu.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  linux/include/asm-arm/cpu.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_CPU_H
-#define __ASM_ARM_CPU_H
-
-#include <linux/percpu.h>
-
-struct cpuinfo_arm {
-	struct cpu	cpu;
-#ifdef CONFIG_SMP
-	struct task_struct *idle;
-	unsigned int	loops_per_jiffy;
-#endif
-};
-
-DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data);
-
-#endif
diff --git a/include/asm-arm/cputime.h b/include/asm-arm/cputime.h
deleted file mode 100644
index 3a8002a5fec7..000000000000
--- a/include/asm-arm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARM_CPUTIME_H
-#define __ARM_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ARM_CPUTIME_H */
diff --git a/include/asm-arm/current.h b/include/asm-arm/current.h
deleted file mode 100644
index 75d21e2a3ff7..000000000000
--- a/include/asm-arm/current.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASMARM_CURRENT_H
-#define _ASMARM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-static inline struct task_struct *get_current(void) __attribute_const__;
-
-static inline struct task_struct *get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current (get_current())
-
-#endif /* _ASMARM_CURRENT_H */
diff --git a/include/asm-arm/delay.h b/include/asm-arm/delay.h
deleted file mode 100644
index b2deda181549..000000000000
--- a/include/asm-arm/delay.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 1995-2004 Russell King
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-#ifndef __ASM_ARM_DELAY_H
-#define __ASM_ARM_DELAY_H
-
-#include <asm/param.h>	/* HZ */
-
-extern void __delay(int loops);
-
-/*
- * This function intentionally does not exist; if you see references to
- * it, it means that you're calling udelay() with an out of range value.
- *
- * With currently imposed limits, this means that we support a max delay
- * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
- */
-extern void __bad_udelay(void);
-
-/*
- * division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-extern void __udelay(unsigned long usecs);
-extern void __const_udelay(unsigned long);
-
-#define MAX_UDELAY_MS 2
-
-#define udelay(n)							\
-	(__builtin_constant_p(n) ?					\
-	  ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :		\
-			__const_udelay((n) * ((2199023U*HZ)>>11))) :	\
-	  __udelay(n))
-
-#endif /* defined(_ARM_DELAY_H) */
-
diff --git a/include/asm-arm/device.h b/include/asm-arm/device.h
deleted file mode 100644
index c61642b40603..000000000000
--- a/include/asm-arm/device.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#ifndef ASMARM_DEVICE_H
-#define ASMARM_DEVICE_H
-
-struct dev_archdata {
-#ifdef CONFIG_DMABOUNCE
-	struct dmabounce_device_info *dmabounce;
-#endif
-};
-
-#endif
diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h
deleted file mode 100644
index 5001390be958..000000000000
--- a/include/asm-arm/div64.h
+++ /dev/null
@@ -1,227 +0,0 @@
-#ifndef __ASM_ARM_DIV64
-#define __ASM_ARM_DIV64
-
-#include <asm/system.h>
-#include <linux/types.h>
-
-/*
- * The semantics of do_div() are:
- *
- * uint32_t do_div(uint64_t *n, uint32_t base)
- * {
- * 	uint32_t remainder = *n % base;
- * 	*n = *n / base;
- * 	return remainder;
- * }
- *
- * In other words, a 64-bit dividend with a 32-bit divisor producing
- * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
- * we call a special __do_div64 helper with completely non standard
- * calling convention for arguments and results (beware).
- */
-
-#ifdef __ARMEB__
-#define __xh "r0"
-#define __xl "r1"
-#else
-#define __xl "r0"
-#define __xh "r1"
-#endif
-
-#define __do_div_asm(n, base)					\
-({								\
-	register unsigned int __base      asm("r4") = base;	\
-	register unsigned long long __n   asm("r0") = n;	\
-	register unsigned long long __res asm("r2");		\
-	register unsigned int __rem       asm(__xh);		\
-	asm(	__asmeq("%0", __xh)				\
-		__asmeq("%1", "r2")				\
-		__asmeq("%2", "r0")				\
-		__asmeq("%3", "r4")				\
-		"bl	__do_div64"				\
-		: "=r" (__rem), "=r" (__res)			\
-		: "r" (__n), "r" (__base)			\
-		: "ip", "lr", "cc");				\
-	n = __res;						\
-	__rem;							\
-})
-
-#if __GNUC__ < 4
-
-/*
- * gcc versions earlier than 4.0 are simply too problematic for the
- * optimized implementation below. First there is gcc PR 15089 that
- * tend to trig on more complex constructs, spurious .global __udivsi3
- * are inserted even if none of those symbols are referenced in the
- * generated code, and those gcc versions are not able to do constant
- * propagation on long long values anyway.
- */
-#define do_div(n, base) __do_div_asm(n, base)
-
-#elif __GNUC__ >= 4
-
-#include <asm/bug.h>
-
-/*
- * If the divisor happens to be constant, we determine the appropriate
- * inverse at compile time to turn the division into a few inline
- * multiplications instead which is much faster. And yet only if compiling
- * for ARMv4 or higher (we need umull/umlal) and if the gcc version is
- * sufficiently recent to perform proper long long constant propagation.
- * (It is unfortunate that gcc doesn't perform all this internally.)
- */
-#define do_div(n, base)							\
-({									\
-	unsigned int __r, __b = (base);					\
-	if (!__builtin_constant_p(__b) || __b == 0 ||			\
-	    (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) {	\
-		/* non-constant divisor (or zero): slow path */		\
-		__r = __do_div_asm(n, __b);				\
-	} else if ((__b & (__b - 1)) == 0) {				\
-		/* Trivial: __b is constant and a power of 2 */		\
-		/* gcc does the right thing with this code.  */		\
-		__r = n;						\
-		__r &= (__b - 1);					\
-		n /= __b;						\
-	} else {							\
-		/* Multiply by inverse of __b: n/b = n*(p/b)/p       */	\
-		/* We rely on the fact that most of this code gets   */	\
-		/* optimized away at compile time due to constant    */	\
-		/* propagation and only a couple inline assembly     */	\
-		/* instructions should remain. Better avoid any      */	\
-		/* code construct that might prevent that.           */	\
-		unsigned long long __res, __x, __t, __m, __n = n;	\
-		unsigned int __c, __p, __z = 0;				\
-		/* preserve low part of n for reminder computation */	\
-		__r = __n;						\
-		/* determine number of bits to represent __b */		\
-		__p = 1 << __div64_fls(__b);				\
-		/* compute __m = ((__p << 64) + __b - 1) / __b */	\
-		__m = (~0ULL / __b) * __p;				\
-		__m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b;	\
-		/* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */	\
-		__x = ~0ULL / __b * __b - 1;				\
-		__res = (__m & 0xffffffff) * (__x & 0xffffffff);	\
-		__res >>= 32;						\
-		__res += (__m & 0xffffffff) * (__x >> 32);		\
-		__t = __res;						\
-		__res += (__x & 0xffffffff) * (__m >> 32);		\
-		__t = (__res < __t) ? (1ULL << 32) : 0;			\
-		__res = (__res >> 32) + __t;				\
-		__res += (__m >> 32) * (__x >> 32);			\
-		__res /= __p;						\
-		/* Now sanitize and optimize what we've got. */		\
-		if (~0ULL % (__b / (__b & -__b)) == 0) {		\
-			/* those cases can be simplified with: */	\
-			__n /= (__b & -__b);				\
-			__m = ~0ULL / (__b / (__b & -__b));		\
-			__p = 1;					\
-			__c = 1;					\
-		} else if (__res != __x / __b) {			\
-			/* We can't get away without a correction    */	\
-			/* to compensate for bit truncation errors.  */	\
-			/* To avoid it we'd need an additional bit   */	\
-			/* to represent __m which would overflow it. */	\
-			/* Instead we do m=p/b and n/b=(n*m+m)/p.    */	\
-			__c = 1;					\
-			/* Compute __m = (__p << 64) / __b */		\
-			__m = (~0ULL / __b) * __p;			\
-			__m += ((~0ULL % __b + 1) * __p) / __b;		\
-		} else {						\
-			/* Reduce __m/__p, and try to clear bit 31   */	\
-			/* of __m when possible otherwise that'll    */	\
-			/* need extra overflow handling later.       */	\
-			unsigned int __bits = -(__m & -__m);		\
-			__bits |= __m >> 32;				\
-			__bits = (~__bits) << 1;			\
-			/* If __bits == 0 then setting bit 31 is     */	\
-			/* unavoidable.  Simply apply the maximum    */	\
-			/* possible reduction in that case.          */	\
-			/* Otherwise the MSB of __bits indicates the */	\
-			/* best reduction we should apply.           */	\
-			if (!__bits) {					\
-				__p /= (__m & -__m);			\
-				__m /= (__m & -__m);			\
-			} else {					\
-				__p >>= __div64_fls(__bits);		\
-				__m >>= __div64_fls(__bits);		\
-			}						\
-			/* No correction needed. */			\
-			__c = 0;					\
-		}							\
-		/* Now we have a combination of 2 conditions:        */	\
-		/* 1) whether or not we need a correction (__c), and */	\
-		/* 2) whether or not there might be an overflow in   */	\
-		/*    the cross product (__m & ((1<<63) | (1<<31)))  */	\
-		/* Select the best insn combination to perform the   */	\
-		/* actual __m * __n / (__p << 64) operation.         */	\
-		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {	\
-			__res = __m;					\
-			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "+r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"cmn	%Q0, %Q1\n\t"			\
-				"adcs	%R0, %R0, %R1\n\t"		\
-				"adc	%Q0, %3, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n), "r" (__z)	\
-				: "cc" );				\
-		}							\
-		if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {		\
-			asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"		\
-				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"umlal	%Q0, %R0, %R1, %R2"		\
-				: "+r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"		\
-				"umlal	%R0, %1, %Q2, %R3\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"adds	%Q0, %1, %Q0\n\t"		\
-				"adc	%R0, %R0, #0\n\t"		\
-				"umlal	%Q0, %R0, %R2, %R3"		\
-				: "+r" (__res), "+r" (__z)		\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		}							\
-		__res /= __p;						\
-		/* The reminder can be computed with 32-bit regs     */	\
-		/* only, and gcc is good at that.                    */	\
-		{							\
-			unsigned int __res0 = __res;			\
-			unsigned int __b0 = __b;			\
-			__r -= __res0 * __b0;				\
-		}							\
-		/* BUG_ON(__r >= __b || __res * __b + __r != n); */	\
-		n = __res;						\
-	}								\
-	__r;								\
-})
-
-/* our own fls implementation to make sure constant propagation is fine */
-#define __div64_fls(bits)						\
-({									\
-	unsigned int __left = (bits), __nr = 0;				\
-	if (__left & 0xffff0000) __nr += 16, __left >>= 16;		\
-	if (__left & 0x0000ff00) __nr +=  8, __left >>=  8;		\
-	if (__left & 0x000000f0) __nr +=  4, __left >>=  4;		\
-	if (__left & 0x0000000c) __nr +=  2, __left >>=  2;		\
-	if (__left & 0x00000002) __nr +=  1;				\
-	__nr;								\
-})
-
-#endif
-
-#endif
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
deleted file mode 100644
index e99406a7bece..000000000000
--- a/include/asm-arm/dma-mapping.h
+++ /dev/null
@@ -1,456 +0,0 @@
-#ifndef ASMARM_DMA_MAPPING_H
-#define ASMARM_DMA_MAPPING_H
-
-#ifdef __KERNEL__
-
-#include <linux/mm.h> /* need struct page */
-
-#include <linux/scatterlist.h>
-
-/*
- * DMA-consistent mapping functions.  These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices.  This is the "generic" version.  The PCI specific version
- * is in pci.h
- *
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
- */
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- *
- * FIXME: This should really be a platform specific issue - we should
- * return false if GFP_DMA allocations may not satisfy the supplied 'mask'.
- */
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	return dev->dma_mask && *dev->dma_mask != 0;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	return 32;
-}
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
-{
-	return !!arch_is_coherent();
-}
-
-/*
- * DMA errors are defined by all-bits-set in the DMA address.
- */
-static inline int dma_mapping_error(dma_addr_t dma_addr)
-{
-	return dma_addr == ~0;
-}
-
-/*
- * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
- * function so drivers using this API are highlighted with build warnings.
- */
-static inline void *
-dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	return NULL;
-}
-
-static inline void
-dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
-		     dma_addr_t handle)
-{
-}
-
-/**
- * dma_alloc_coherent - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, unbuffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_coherent
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_coherent().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
-		  dma_addr_t handle);
-
-/**
- * dma_mmap_coherent - map a coherent DMA allocation into user space
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @vma: vm_area_struct describing requested user mapping
- * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @size: size of memory originally requested in dma_alloc_coherent
- *
- * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
- * into user space.  The coherent DMA buffer must not be freed by the
- * driver until the user space mapping has been released.
- */
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t handle, size_t size);
-
-
-/**
- * dma_alloc_writecombine - allocate writecombining memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, buffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
-
-#define dma_free_writecombine(dev,size,cpu_addr,handle) \
-	dma_free_coherent(dev,size,cpu_addr,handle)
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t handle, size_t size);
-
-
-/**
- * dma_map_single - map a single buffer for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @cpu_addr: CPU direct mapped address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_single() or
- * dma_sync_single_for_cpu().
- */
-#ifndef CONFIG_DMABOUNCE
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-	       enum dma_data_direction dir)
-{
-	if (!arch_is_coherent())
-		dma_cache_maint(cpu_addr, size, dir);
-
-	return virt_to_dma(dev, (unsigned long)cpu_addr);
-}
-#else
-extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
-#endif
-
-/**
- * dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page() or
- * dma_sync_single_for_cpu().
- */
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction dir)
-{
-	return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
-}
-
-/**
- * dma_unmap_single - unmap a single buffer previously mapped
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
-		 enum dma_data_direction dir)
-{
-	/* nothing to do */
-}
-#else
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
-#endif
-
-/**
- * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
-	       enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, handle, size, (int)dir);
-}
-
-/**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scatter-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt;
-
-		sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
-		virt = sg_virt(sg);
-
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-
-	return nents;
-}
-#else
-extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Unmap a set of streaming mode DMA translations.
- * Again, CPU read rules concerning calls here are the same as for
- * dma_unmap_single() above.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-	     enum dma_data_direction dir)
-{
-
-	/* nothing to do */
-}
-#else
-extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
-#endif
-
-
-/**
- * dma_sync_single_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a single streaming mode DMA
- * translation after a transfer.
- *
- * If you perform a dma_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, you
- * must first the perform a dma_sync_for_device, and then the
- * device again owns the buffer.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
-			enum dma_data_direction dir)
-{
-	if (!arch_is_coherent())
-		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
-			   enum dma_data_direction dir)
-{
-	if (!arch_is_coherent())
-		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
-}
-#else
-extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
-extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
-#endif
-
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as dma_sync_single_for_* but for a scatter-gather list,
- * same rules and usage.
- */
-#ifndef CONFIG_DMABOUNCE
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
-		    enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt = sg_virt(sg);
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
-		       enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++, sg++) {
-		char *virt = sg_virt(sg);
-		if (!arch_is_coherent())
-			dma_cache_maint(virt, sg->length, dir);
-	}
-}
-#else
-extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
-#endif
-
-#ifdef CONFIG_DMABOUNCE
-/*
- * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/**
- * dmabounce_register_dev
- *
- * @dev: valid struct device pointer
- * @small_buf_size: size of buffers to use with small buffer pool
- * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
- *
- * This function should be called by low-level platform code to register
- * a device as requireing DMA buffer bouncing. The function will allocate
- * appropriate DMA pools for the device.
- *
- */
-extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
-
-/**
- * dmabounce_unregister_dev
- *
- * @dev: valid struct device pointer
- *
- * This function should be called by low-level platform code when device
- * that was previously registered with dmabounce_register_dev is removed
- * from the system.
- *
- */
-extern void dmabounce_unregister_dev(struct device *);
-
-/**
- * dma_needs_bounce
- *
- * @dev: valid struct device pointer
- * @dma_handle: dma_handle of unbounced buffer
- * @size: size of region being mapped
- *
- * Platforms that utilize the dmabounce mechanism must implement
- * this function.
- *
- * The dmabounce routines call this function whenever a dma-mapping
- * is requested to determine whether a given buffer needs to be bounced
- * or not. The function must return 0 if the buffer is OK for
- * DMA access and 1 if the buffer needs to be bounced.
- *
- */
-extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-#endif /* CONFIG_DMABOUNCE */
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-arm/dma.h b/include/asm-arm/dma.h
deleted file mode 100644
index 9f2c5305c260..000000000000
--- a/include/asm-arm/dma.h
+++ /dev/null
@@ -1,143 +0,0 @@
-#ifndef __ASM_ARM_DMA_H
-#define __ASM_ARM_DMA_H
-
-typedef unsigned int dmach_t;
-
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/scatterlist.h>
-#include <asm/arch/dma.h>
-
-/*
- * This is the maximum virtual address which can be DMA'd from.
- */
-#ifndef MAX_DMA_ADDRESS
-#define MAX_DMA_ADDRESS	0xffffffff
-#endif
-
-/*
- * DMA modes
- */
-typedef unsigned int dmamode_t;
-
-#define DMA_MODE_MASK	3
-
-#define DMA_MODE_READ	 0
-#define DMA_MODE_WRITE	 1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT	 4
-
-extern spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- */
-#define clear_dma_ff(channel)
-
-/* Set only the page register bits of the transfer address.
- *
- * NOTE: This is an architecture specific function, and should
- *       be hidden from the drivers
- */
-extern void set_dma_page(dmach_t channel, char pagenr);
-
-/* Request a DMA channel
- *
- * Some architectures may need to do allocate an interrupt
- */
-extern int  request_dma(dmach_t channel, const char * device_id);
-
-/* Free a DMA channel
- *
- * Some architectures may need to do free an interrupt
- */
-extern void free_dma(dmach_t channel);
-
-/* Enable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * enabling an interrupt and setting the DMA registers.
- */
-extern void enable_dma(dmach_t channel);
-
-/* Disable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * disabling an interrupt or whatever.
- */
-extern void disable_dma(dmach_t channel);
-
-/* Test whether the specified channel has an active DMA transfer
- */
-extern int dma_channel_active(dmach_t channel);
-
-/* Set the DMA scatter gather list for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
-
-/* Set the DMA address for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void __set_dma_addr(dmach_t channel, void *addr);
-#define set_dma_addr(channel, addr)				\
-	__set_dma_addr(channel, bus_to_virt(addr))
-
-/* Set the DMA byte count for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA count immediately, but defer it to the enable_dma().
- */
-extern void set_dma_count(dmach_t channel, unsigned long count);
-
-/* Set the transfer direction for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA transfer direction immediately, but defer it to the
- * enable_dma().
- */
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
-
-/* Set the transfer speed for this channel
- */
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-extern int  get_dma_residue(dmach_t channel);
-
-#ifndef NO_DMA
-#define NO_DMA	255
-#endif
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif /* _ARM_DMA_H */
diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h
deleted file mode 100644
index 3c12a7625304..000000000000
--- a/include/asm-arm/domain.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  linux/include/asm-arm/domain.h
- *
- *  Copyright (C) 1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PROC_DOMAIN_H
-#define __ASM_PROC_DOMAIN_H
-
-/*
- * Domain numbers
- *
- *  DOMAIN_IO     - domain 2 includes all IO only
- *  DOMAIN_USER   - domain 1 includes all user memory only
- *  DOMAIN_KERNEL - domain 0 includes all kernel memory only
- *
- * The domain numbering depends on whether we support 36 physical
- * address for I/O or not.  Addresses above the 32 bit boundary can
- * only be mapped using supersections and supersections can only
- * be set for domain 0.  We could just default to DOMAIN_IO as zero,
- * but there may be systems with supersection support and no 36-bit
- * addressing.  In such cases, we want to map system memory with
- * supersections to reduce TLB misses and footprint.
- *
- * 36-bit addressing and supersections are only available on
- * CPUs based on ARMv6+ or the Intel XSC3 core.
- */
-#ifndef CONFIG_IO_36
-#define DOMAIN_KERNEL	0
-#define DOMAIN_TABLE	0
-#define DOMAIN_USER	1
-#define DOMAIN_IO	2
-#else
-#define DOMAIN_KERNEL	2
-#define DOMAIN_TABLE	2
-#define DOMAIN_USER	1
-#define DOMAIN_IO	0
-#endif
-
-/*
- * Domain types
- */
-#define DOMAIN_NOACCESS	0
-#define DOMAIN_CLIENT	1
-#define DOMAIN_MANAGER	3
-
-#define domain_val(dom,type)	((type) << (2*(dom)))
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_MMU
-#define set_domain(x)					\
-	do {						\
-	__asm__ __volatile__(				\
-	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
-	  : : "r" (x));					\
-	isb();						\
-	} while (0)
-
-#define modify_domain(dom,type)					\
-	do {							\
-	struct thread_info *thread = current_thread_info();	\
-	unsigned int domain = thread->cpu_domain;		\
-	domain &= ~domain_val(dom, DOMAIN_MANAGER);		\
-	thread->cpu_domain = domain | domain_val(dom, type);	\
-	set_domain(thread->cpu_domain);				\
-	} while (0)
-
-#else
-#define set_domain(x)		do { } while (0)
-#define modify_domain(dom,type)	do { } while (0)
-#endif
-
-#endif
-#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h
deleted file mode 100644
index 5e22881a630d..000000000000
--- a/include/asm-arm/ecard.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * linux/include/asm-arm/ecard.h
- *
- * definitions for expansion cards
- *
- * This is a new system as from Linux 1.2.3
- *
- * Changelog:
- *  11-12-1996	RMK	Further minor improvements
- *  12-09-1997	RMK	Added interrupt enable/disable for card level
- *
- * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
- */
-
-#ifndef __ASM_ECARD_H
-#define __ASM_ECARD_H
-
-/*
- * Currently understood cards (but not necessarily
- * supported):
- *                        Manufacturer  Product ID
- */
-#define MANU_ACORN		0x0000
-#define PROD_ACORN_SCSI			0x0002
-#define PROD_ACORN_ETHER1		0x0003
-#define PROD_ACORN_MFM			0x000b
-
-#define MANU_ANT2		0x0011
-#define PROD_ANT_ETHER3			0x00a4
-
-#define MANU_ATOMWIDE		0x0017
-#define PROD_ATOMWIDE_3PSERIAL		0x0090
-
-#define MANU_IRLAM_INSTRUMENTS	0x001f
-#define MANU_IRLAM_INSTRUMENTS_ETHERN	0x5678
-
-#define MANU_OAK		0x0021
-#define PROD_OAK_SCSI			0x0058
-
-#define MANU_MORLEY		0x002b
-#define PROD_MORLEY_SCSI_UNCACHED	0x0067
-
-#define MANU_CUMANA		0x003a
-#define PROD_CUMANA_SCSI_2		0x003a
-#define PROD_CUMANA_SCSI_1		0x00a0
-
-#define MANU_ICS		0x003c
-#define PROD_ICS_IDE			0x00ae
-
-#define MANU_ICS2		0x003d
-#define PROD_ICS2_IDE			0x00ae
-
-#define MANU_SERPORT		0x003f
-#define PROD_SERPORT_DSPORT		0x00b9
-
-#define MANU_ARXE		0x0041
-#define PROD_ARXE_SCSI			0x00be
-
-#define MANU_I3			0x0046
-#define PROD_I3_ETHERLAN500		0x00d4
-#define PROD_I3_ETHERLAN600		0x00ec
-#define PROD_I3_ETHERLAN600A		0x011e
-
-#define MANU_ANT		0x0053
-#define PROD_ANT_ETHERM			0x00d8
-#define PROD_ANT_ETHERB			0x00e4
-
-#define MANU_ALSYSTEMS		0x005b
-#define PROD_ALSYS_SCSIATAPI		0x0107
-
-#define MANU_MCS		0x0063
-#define PROD_MCS_CONNECT32		0x0125
-
-#define MANU_EESOX		0x0064
-#define PROD_EESOX_SCSI2		0x008c
-
-#define MANU_YELLOWSTONE	0x0096
-#define PROD_YELLOWSTONE_RAPIDE32	0x0120
-
-#ifdef ECARD_C
-#define CONST
-#else
-#define CONST const
-#endif
-
-#define MAX_ECARDS	9
-
-struct ecard_id {			/* Card ID structure		*/
-	unsigned short	manufacturer;
-	unsigned short	product;
-	void		*data;
-};
-
-struct in_ecid {			/* Packed card ID information	*/
-	unsigned short	product;	/* Product code			*/
-	unsigned short	manufacturer;	/* Manufacturer code		*/
-	unsigned char	id:4;		/* Simple ID			*/
-	unsigned char	cd:1;		/* Chunk dir present		*/
-	unsigned char	is:1;		/* Interrupt status pointers	*/
-	unsigned char	w:2;		/* Width			*/
-	unsigned char	country;	/* Country			*/
-	unsigned char	irqmask;	/* IRQ mask			*/
-	unsigned char	fiqmask;	/* FIQ mask			*/
-	unsigned long	irqoff;		/* IRQ offset			*/
-	unsigned long	fiqoff;		/* FIQ offset			*/
-};
-
-typedef struct expansion_card ecard_t;
-typedef unsigned long *loader_t;
-
-typedef struct expansion_card_ops {	/* Card handler routines	*/
-	void (*irqenable)(ecard_t *ec, int irqnr);
-	void (*irqdisable)(ecard_t *ec, int irqnr);
-	int  (*irqpending)(ecard_t *ec);
-	void (*fiqenable)(ecard_t *ec, int fiqnr);
-	void (*fiqdisable)(ecard_t *ec, int fiqnr);
-	int  (*fiqpending)(ecard_t *ec);
-} expansioncard_ops_t;
-
-#define ECARD_NUM_RESOURCES	(6)
-
-#define ECARD_RES_IOCSLOW	(0)
-#define ECARD_RES_IOCMEDIUM	(1)
-#define ECARD_RES_IOCFAST	(2)
-#define ECARD_RES_IOCSYNC	(3)
-#define ECARD_RES_MEMC		(4)
-#define ECARD_RES_EASI		(5)
-
-#define ecard_resource_start(ec,nr)	((ec)->resource[nr].start)
-#define ecard_resource_end(ec,nr)	((ec)->resource[nr].end)
-#define ecard_resource_len(ec,nr)	((ec)->resource[nr].end - \
-					 (ec)->resource[nr].start + 1)
-#define ecard_resource_flags(ec,nr)	((ec)->resource[nr].flags)
-
-/*
- * This contains all the info needed on an expansion card
- */
-struct expansion_card {
-	struct expansion_card  *next;
-
-	struct device		dev;
-	struct resource		resource[ECARD_NUM_RESOURCES];
-
-	/* Public data */
-	void __iomem		*irqaddr;	/* address of IRQ register	*/
-	void __iomem		*fiqaddr;	/* address of FIQ register	*/
-	unsigned char		irqmask;	/* IRQ mask			*/
-	unsigned char		fiqmask;	/* FIQ mask			*/
-	unsigned char  		claimed;	/* Card claimed?		*/
-	unsigned char		easi;		/* EASI card			*/
-
-	void			*irq_data;	/* Data for use for IRQ by card	*/
-	void			*fiq_data;	/* Data for use for FIQ by card	*/
-	const expansioncard_ops_t *ops;		/* Enable/Disable Ops for card	*/
-
-	CONST unsigned int	slot_no;	/* Slot number			*/
-	CONST unsigned int	dma;		/* DMA number (for request_dma)	*/
-	CONST unsigned int	irq;		/* IRQ number (for request_irq)	*/
-	CONST unsigned int	fiq;		/* FIQ number (for request_irq)	*/
-	CONST struct in_ecid	cid;		/* Card Identification		*/
-
-	/* Private internal data */
-	const char		*card_desc;	/* Card description		*/
-	CONST unsigned int	podaddr;	/* Base Linux address for card	*/
-	CONST loader_t		loader;		/* loader program */
-	u64			dma_mask;
-};
-
-void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
-
-struct in_chunk_dir {
-	unsigned int start_offset;
-	union {
-		unsigned char string[256];
-		unsigned char data[1];
-	} d;
-};
-
-/*
- * Read a chunk from an expansion card
- * cd : where to put read data
- * ec : expansion card info struct
- * id : id number to find
- * num: (n+1)'th id to find.
- */
-extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
-
-/*
- * Request and release ecard resources
- */
-extern int ecard_request_resources(struct expansion_card *ec);
-extern void ecard_release_resources(struct expansion_card *ec);
-
-void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
-			   unsigned long offset, unsigned long maxsize);
-#define ecardm_iounmap(__ec, __addr)	devm_iounmap(&(__ec)->dev, __addr)
-
-extern struct bus_type ecard_bus_type;
-
-#define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
-
-struct ecard_driver {
-	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
-	void			(*remove)(struct expansion_card *);
-	void			(*shutdown)(struct expansion_card *);
-	const struct ecard_id	*id_table;
-	unsigned int		id;
-	struct device_driver	drv;
-};
-
-#define ECARD_DRV(_d)	container_of((_d), struct ecard_driver, drv)
-
-#define ecard_set_drvdata(ec,data)	dev_set_drvdata(&(ec)->dev, (data))
-#define ecard_get_drvdata(ec)		dev_get_drvdata(&(ec)->dev)
-
-int ecard_register_driver(struct ecard_driver *);
-void ecard_remove_driver(struct ecard_driver *);
-
-#endif
diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h
deleted file mode 100644
index 4ca751627489..000000000000
--- a/include/asm-arm/elf.h
+++ /dev/null
@@ -1,116 +0,0 @@
-#ifndef __ASMARM_ELF_H
-#define __ASMARM_ELF_H
-
-#include <asm/hwcap.h>
-
-#ifndef __ASSEMBLY__
-/*
- * ELF register definitions..
- */
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fp elf_fpregset_t;
-#endif
-
-#define EM_ARM	40
-#define EF_ARM_APCS26 0x08
-#define EF_ARM_SOFT_FLOAT 0x200
-#define EF_ARM_EABI_MASK 0xFF000000
-
-#define R_ARM_NONE	0
-#define R_ARM_PC24	1
-#define R_ARM_ABS32	2
-#define R_ARM_CALL	28
-#define R_ARM_JUMP24	29
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __ARMEB__
-#define ELF_DATA	ELFDATA2MSB
-#else
-#define ELF_DATA	ELFDATA2LSB
-#endif
-#define ELF_ARCH	EM_ARM
-
-#ifndef __ASSEMBLY__
-/*
- * This yields a string that ld.so will use to load implementation
- * specific libraries for optimization.  This is more specific in
- * intent than poking at uname or /proc/cpuinfo.
- *
- * For now we just provide a fairly general string that describes the
- * processor family.  This could be made more specific later if someone
- * implemented optimisations that require it.  26-bit CPUs give you
- * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
- * supported).  32-bit CPUs give you "v3[lb]" for anything based on an
- * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
- * core.
- */
-#define ELF_PLATFORM_SIZE 8
-#define ELF_PLATFORM	(elf_platform)
-
-extern char elf_platform[];
-#endif
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
-
-/*
- * 32-bit code is always OK.  Some cpus can do 26-bit, some can't.
- */
-#define ELF_PROC_OK(x)	(ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
-
-#define ELF_THUMB_OK(x) \
-	((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
-	 ((x)->e_entry & 3) == 0)
-
-#define ELF_26BIT_OK(x) \
-	((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
-	  ((x)->e_flags & EF_ARM_APCS26) == 0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
-
-/* When the program starts, a1 contains a pointer to a function to be 
-   registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
-   have no such handler.  */
-#define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0
-
-/*
- * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
- * and CP1, we only enable access to the iWMMXt coprocessor if the
- * binary is EABI or softfloat (and thus, guaranteed not to use
- * FPA instructions.)
- */
-#define SET_PERSONALITY(ex, ibcs2)					\
-	do {								\
-		if ((ex).e_flags & EF_ARM_APCS26) {			\
-			set_personality(PER_LINUX);			\
-		} else {						\
-			set_personality(PER_LINUX_32BIT);		\
-			if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
-				set_thread_flag(TIF_USING_IWMMXT);	\
-			else						\
-				clear_thread_flag(TIF_USING_IWMMXT);	\
-		}							\
-	} while (0)
-
-#endif
diff --git a/include/asm-arm/emergency-restart.h b/include/asm-arm/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-arm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-arm/errno.h b/include/asm-arm/errno.h
deleted file mode 100644
index 6e60f0612bb6..000000000000
--- a/include/asm-arm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ARM_ERRNO_H
-#define _ARM_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif
diff --git a/include/asm-arm/fb.h b/include/asm-arm/fb.h
deleted file mode 100644
index d92e99cd8c8a..000000000000
--- a/include/asm-arm/fb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-arm/fcntl.h b/include/asm-arm/fcntl.h
deleted file mode 100644
index a80b6607b2ef..000000000000
--- a/include/asm-arm/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ARM_FCNTL_H
-#define _ARM_FCNTL_H
-
-#define O_DIRECTORY	 040000	/* must be a directory */
-#define O_NOFOLLOW	0100000	/* don't follow links */
-#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
-#define O_LARGEFILE	0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif
diff --git a/include/asm-arm/fiq.h b/include/asm-arm/fiq.h
deleted file mode 100644
index a3bad09e825c..000000000000
--- a/include/asm-arm/fiq.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/include/asm-arm/fiq.h
- *
- * Support for FIQ on ARM architectures.
- * Written by Philip Blundell <philb@gnu.org>, 1998
- * Re-written by Russell King
- */
-
-#ifndef __ASM_FIQ_H
-#define __ASM_FIQ_H
-
-#include <asm/ptrace.h>
-
-struct fiq_handler {
-	struct fiq_handler *next;
-	/* Name
-	 */
-	const char *name;
-	/* Called to ask driver to relinquish/
-	 * reacquire FIQ
-	 * return zero to accept, or -<errno>
-	 */
-	int (*fiq_op)(void *, int relinquish);
-	/* data for the relinquish/reacquire functions
-	 */
-	void *dev_id;
-};
-
-extern int claim_fiq(struct fiq_handler *f);
-extern void release_fiq(struct fiq_handler *f);
-extern void set_fiq_handler(void *start, unsigned int length);
-extern void set_fiq_regs(struct pt_regs *regs);
-extern void get_fiq_regs(struct pt_regs *regs);
-extern void enable_fiq(int fiq);
-extern void disable_fiq(int fiq);
-
-#endif
diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h
deleted file mode 100644
index 9918aa46d9e5..000000000000
--- a/include/asm-arm/flat.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __ARM_FLAT_H__
-#define __ARM_FLAT_H__
-
-/* An odd number of words will be pushed after this alignment, so
-   deliberately misalign the value.  */
-#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
-#define	flat_argvp_envp_on_stack()		1
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		0
-
-#endif /* __ARM_FLAT_H__ */
diff --git a/include/asm-arm/floppy.h b/include/asm-arm/floppy.h
deleted file mode 100644
index 41a5e9d6bb69..000000000000
--- a/include/asm-arm/floppy.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- *  linux/include/asm-arm/floppy.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
- */
-#ifndef __ASM_ARM_FLOPPY_H
-#define __ASM_ARM_FLOPPY_H
-#if 0
-#include <asm/arch/floppy.h>
-#endif
-
-#define fd_outb(val,port)			\
-	do {					\
-		if ((port) == FD_DOR)		\
-			fd_setdor((val));	\
-		else				\
-			outb((val),(port));	\
-	} while(0)
-
-#define fd_inb(port)		inb((port))
-#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
-					    IRQF_DISABLED,"floppy",NULL)
-#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
-#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
-#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
-
-static inline int fd_dma_setup(void *data, unsigned int length,
-			       unsigned int mode, unsigned long addr)
-{
-	set_dma_mode(DMA_FLOPPY, mode);
-	__set_dma_addr(DMA_FLOPPY, data);
-	set_dma_count(DMA_FLOPPY, length);
-	virtual_dma_port = addr;
-	enable_dma(DMA_FLOPPY);
-	return 0;
-}
-#define fd_dma_setup		fd_dma_setup
-
-#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
-#define fd_free_dma()		free_dma(DMA_FLOPPY)
-#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
-
-/* need to clean up dma.h */
-#define DMA_FLOPPYDISK		DMA_FLOPPY
-
-/* Floppy_selects is the list of DOR's to select drive fd
- *
- * On initialisation, the floppy list is scanned, and the drives allocated
- * in the order that they are found.  This is done by seeking the drive
- * to a non-zero track, and then restoring it to track 0.  If an error occurs,
- * then there is no floppy drive present.       [to be put back in again]
- */
-static unsigned char floppy_selects[2][4] =
-{
-	{ 0x10, 0x21, 0x23, 0x33 },
-	{ 0x10, 0x21, 0x23, 0x33 }
-};
-
-#define fd_setdor(dor)								\
-do {										\
-	int new_dor = (dor);							\
-	if (new_dor & 0xf0)							\
-		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
-	else									\
-		new_dor &= 0x0c;						\
-	outb(new_dor, FD_DOR);							\
-} while (0)
-
-/*
- * Someday, we'll automatically detect which drives are present...
- */
-static inline void fd_scandrives (void)
-{
-#if 0
-	int floppy, drive_count;
-
-	fd_disable_irq();
-	raw_cmd = &default_raw_cmd;
-	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
-	raw_cmd->track = 0;
-	raw_cmd->rate = ?;
-	drive_count = 0;
-	for (floppy = 0; floppy < 4; floppy ++) {
-		current_drive = drive_count;
-		/*
-		 * Turn on floppy motor
-		 */
-		if (start_motor(redo_fd_request))
-			continue;
-		/*
-		 * Set up FDC
-		 */
-		fdc_specify();
-		/*
-		 * Tell FDC to recalibrate
-		 */
-		output_byte(FD_RECALIBRATE);
-		LAST_OUT(UNIT(floppy));
-		/* wait for command to complete */
-		if (!successful) {
-			int i;
-			for (i = drive_count; i < 3; i--)
-				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
-			floppy_selects[fdc][3] = 0;
-			floppy -= 1;
-		} else
-			drive_count++;
-	}
-#else
-	floppy_selects[0][0] = 0x10;
-	floppy_selects[0][1] = 0x21;
-	floppy_selects[0][2] = 0x23;
-	floppy_selects[0][3] = 0x33;
-#endif
-}
-
-#define FDC1 (0x3f0)
-
-#define FLOPPY0_TYPE 4
-#define FLOPPY1_TYPE 4
-
-#define N_FDC 1
-#define N_DRIVE 4
-
-#define CROSS_64KB(a,s) (0)
-
-/*
- * This allows people to reverse the order of
- * fd0 and fd1, in case their hardware is
- * strangely connected (as some RiscPCs
- * and A5000s seem to be).
- */
-static void driveswap(int *ints, int dummy, int dummy2)
-{
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-	floppy_selects[0][1] ^= floppy_selects[0][0];
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-}
-
-#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
-	
-#endif
diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h
deleted file mode 100644
index 392eb5332323..000000000000
--- a/include/asm-arm/fpstate.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- *  linux/include/asm-arm/fpstate.h
- *
- *  Copyright (C) 1995 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_FPSTATE_H
-#define __ASM_ARM_FPSTATE_H
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * VFP storage area has:
- *  - FPEXC, FPSCR, FPINST and FPINST2.
- *  - 16 or 32 double precision data registers
- *  - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
- * 
- *  FPEXC will always be non-zero once the VFP has been used in this process.
- */
-
-struct vfp_hard_struct {
-#ifdef CONFIG_VFPv3
-	__u64 fpregs[32];
-#else
-	__u64 fpregs[16];
-#endif
-#if __LINUX_ARM_ARCH__ < 6
-	__u32 fpmx_state;
-#endif
-	__u32 fpexc;
-	__u32 fpscr;
-	/*
-	 * VFP implementation specific state
-	 */
-	__u32 fpinst;
-	__u32 fpinst2;
-
-#ifdef CONFIG_SMP
-	__u32 cpu;
-#endif
-};
-
-union vfp_state {
-	struct vfp_hard_struct	hard;
-};
-
-extern void vfp_flush_thread(union vfp_state *);
-extern void vfp_release_thread(union vfp_state *);
-
-#define FP_HARD_SIZE 35
-
-struct fp_hard_struct {
-	unsigned int save[FP_HARD_SIZE];		/* as yet undefined */
-};
-
-#define FP_SOFT_SIZE 35
-
-struct fp_soft_struct {
-	unsigned int save[FP_SOFT_SIZE];		/* undefined information */
-};
-
-#define IWMMXT_SIZE	0x98
-
-struct iwmmxt_struct {
-	unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)];
-};
-
-union fp_state {
-	struct fp_hard_struct	hard;
-	struct fp_soft_struct	soft;
-#ifdef CONFIG_IWMMXT
-	struct iwmmxt_struct	iwmmxt;
-#endif
-};
-
-#define FP_SIZE (sizeof(union fp_state) / sizeof(int))
-
-struct crunch_state {
-	unsigned int	mvdx[16][2];
-	unsigned int	mvax[4][3];
-	unsigned int	dspsc[2];
-};
-
-#define CRUNCH_SIZE	sizeof(struct crunch_state)
-
-#endif
-
-#endif
diff --git a/include/asm-arm/ftrace.h b/include/asm-arm/ftrace.h
deleted file mode 100644
index 584ef9a8e5a5..000000000000
--- a/include/asm-arm/ftrace.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_ARM_FTRACE
-#define _ASM_ARM_FTRACE
-
-#ifdef CONFIG_FTRACE
-#define MCOUNT_ADDR		((long)(mcount))
-#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
-
-#ifndef __ASSEMBLY__
-extern void mcount(void);
-#endif
-
-#endif
-
-#endif /* _ASM_ARM_FTRACE */
diff --git a/include/asm-arm/futex.h b/include/asm-arm/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/include/asm-arm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-arm/glue.h b/include/asm-arm/glue.h
deleted file mode 100644
index a97a182ba287..000000000000
--- a/include/asm-arm/glue.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  linux/include/asm-arm/glue.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file provides the glue to stick the processor-specific bits
- *  into the kernel in an efficient manner.  The idea is to use branches
- *  when we're only targetting one class of TLB, or indirect calls
- *  when we're targetting multiple classes of TLBs.
- */
-#ifdef __KERNEL__
-
-
-#ifdef __STDC__
-#define ____glue(name,fn)	name##fn
-#else
-#define ____glue(name,fn)	name/**/fn
-#endif
-#define __glue(name,fn)		____glue(name,fn)
-
-
-
-/*
- *	Data Abort Model
- *	================
- *
- *	We have the following to choose from:
- *	  arm6          - ARM6 style
- *	  arm7		- ARM7 style
- *	  v4_early	- ARMv4 without Thumb early abort handler
- *	  v4t_late	- ARMv4 with Thumb late abort handler
- *	  v4t_early	- ARMv4 with Thumb early abort handler
- *	  v5tej_early	- ARMv5 with Thumb and Java early abort handler
- *	  xscale	- ARMv5 with Thumb with Xscale extensions
- *	  v6_early	- ARMv6 generic early abort handler
- *	  v7_early	- ARMv7 generic early abort handler
- */
-#undef CPU_DABORT_HANDLER
-#undef MULTI_DABORT
-
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM710)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm7_data_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_LV4T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4t_late_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5TJ
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v5tj_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v5t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV6
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v6_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV7
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v7_early_abort
-# endif
-#endif
-
-#ifndef CPU_DABORT_HANDLER
-#error Unknown data abort handler type
-#endif
-
-/*
- * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
- */
-#undef CPU_PABORT_HANDLER
-#undef MULTI_PABORT
-
-#ifdef CONFIG_CPU_PABRT_IFAR
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_NOIFAR
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
-# endif
-#endif
-
-#ifndef CPU_PABORT_HANDLER
-#error Unknown prefetch abort handler type
-#endif
-
-#endif
diff --git a/include/asm-arm/gpio.h b/include/asm-arm/gpio.h
deleted file mode 100644
index fff4f800ee42..000000000000
--- a/include/asm-arm/gpio.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ARCH_ARM_GPIO_H
-#define _ARCH_ARM_GPIO_H
-
-/* not all ARM platforms necessarily support this API ... */
-#include <asm/arch/gpio.h>
-
-#endif /* _ARCH_ARM_GPIO_H */
diff --git a/include/asm-arm/hardirq.h b/include/asm-arm/hardirq.h
deleted file mode 100644
index 182310b99195..000000000000
--- a/include/asm-arm/hardirq.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-	unsigned int local_timer_irqs;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#if NR_IRQS > 256
-#define HARDIRQ_BITS	9
-#else
-#define HARDIRQ_BITS	8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have space
- * for potentially all IRQ sources in the system nesting
- * on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
-
-#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-arm/hardware.h b/include/asm-arm/hardware.h
deleted file mode 100644
index 1fd1a5b6504b..000000000000
--- a/include/asm-arm/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Common hardware definitions
- */
-
-#ifndef __ASM_HARDWARE_H
-#define __ASM_HARDWARE_H
-
-#include <asm/arch/hardware.h>
-
-#endif
diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h
deleted file mode 100644
index 04be3bdf46b8..000000000000
--- a/include/asm-arm/hardware/arm_timer.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
-#define __ASM_ARM_HARDWARE_ARM_TIMER_H
-
-#define TIMER_LOAD	0x00
-#define TIMER_VALUE	0x04
-#define TIMER_CTRL	0x08
-#define TIMER_CTRL_ONESHOT	(1 << 0)
-#define TIMER_CTRL_32BIT	(1 << 1)
-#define TIMER_CTRL_DIV1		(0 << 2)
-#define TIMER_CTRL_DIV16	(1 << 2)
-#define TIMER_CTRL_DIV256	(2 << 2)
-#define TIMER_CTRL_IE		(1 << 5)	/* Interrupt Enable (versatile only) */
-#define TIMER_CTRL_PERIODIC	(1 << 6)
-#define TIMER_CTRL_ENABLE	(1 << 7)
-
-#define TIMER_INTCLR	0x0c
-#define TIMER_RIS	0x10
-#define TIMER_MIS	0x14
-#define TIMER_BGLOAD	0x18
-
-#endif
diff --git a/include/asm-arm/hardware/arm_twd.h b/include/asm-arm/hardware/arm_twd.h
deleted file mode 100644
index e521b70713c8..000000000000
--- a/include/asm-arm/hardware/arm_twd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
-#endif
diff --git a/include/asm-arm/hardware/cache-l2x0.h b/include/asm-arm/hardware/cache-l2x0.h
deleted file mode 100644
index 54029a740396..000000000000
--- a/include/asm-arm/hardware/cache-l2x0.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/hardware/cache-l2x0.h
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARM_HARDWARE_L2X0_H
-#define __ASM_ARM_HARDWARE_L2X0_H
-
-#define L2X0_CACHE_ID			0x000
-#define L2X0_CACHE_TYPE			0x004
-#define L2X0_CTRL			0x100
-#define L2X0_AUX_CTRL			0x104
-#define L2X0_EVENT_CNT_CTRL		0x200
-#define L2X0_EVENT_CNT1_CFG		0x204
-#define L2X0_EVENT_CNT0_CFG		0x208
-#define L2X0_EVENT_CNT1_VAL		0x20C
-#define L2X0_EVENT_CNT0_VAL		0x210
-#define L2X0_INTR_MASK			0x214
-#define L2X0_MASKED_INTR_STAT		0x218
-#define L2X0_RAW_INTR_STAT		0x21C
-#define L2X0_INTR_CLEAR			0x220
-#define L2X0_CACHE_SYNC			0x730
-#define L2X0_INV_LINE_PA		0x770
-#define L2X0_INV_WAY			0x77C
-#define L2X0_CLEAN_LINE_PA		0x7B0
-#define L2X0_CLEAN_LINE_IDX		0x7B8
-#define L2X0_CLEAN_WAY			0x7BC
-#define L2X0_CLEAN_INV_LINE_PA		0x7F0
-#define L2X0_CLEAN_INV_LINE_IDX		0x7F8
-#define L2X0_CLEAN_INV_WAY		0x7FC
-#define L2X0_LOCKDOWN_WAY_D		0x900
-#define L2X0_LOCKDOWN_WAY_I		0x904
-#define L2X0_TEST_OPERATION		0xF00
-#define L2X0_LINE_DATA			0xF10
-#define L2X0_LINE_TAG			0xF30
-#define L2X0_DEBUG_CTRL			0xF40
-
-#ifndef __ASSEMBLY__
-extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
-#endif
-
-#endif
diff --git a/include/asm-arm/hardware/clps7111.h b/include/asm-arm/hardware/clps7111.h
deleted file mode 100644
index 8d3228dc1778..000000000000
--- a/include/asm-arm/hardware/clps7111.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/clps7111.h
- *
- *  This file contains the hardware definitions of the CLPS7111 internal
- *  registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_CLPS7111_H
-#define __ASM_HARDWARE_CLPS7111_H
-
-#define CLPS7111_PHYS_BASE	(0x80000000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off)		__raw_readb(CLPS7111_BASE + (off))
-#define clps_readw(off)		__raw_readw(CLPS7111_BASE + (off))
-#define clps_readl(off)		__raw_readl(CLPS7111_BASE + (off))
-#define clps_writeb(val,off)	__raw_writeb(val, CLPS7111_BASE + (off))
-#define clps_writew(val,off)	__raw_writew(val, CLPS7111_BASE + (off))
-#define clps_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
-#endif
-
-#define PADR		(0x0000)
-#define PBDR		(0x0001)
-#define PDDR		(0x0003)
-#define PADDR		(0x0040)
-#define PBDDR		(0x0041)
-#define PDDDR		(0x0043)
-#define PEDR		(0x0080)
-#define PEDDR		(0x00c0)
-#define SYSCON1		(0x0100)
-#define SYSFLG1		(0x0140)
-#define MEMCFG1		(0x0180)
-#define MEMCFG2		(0x01c0)
-#define DRFPR		(0x0200)
-#define INTSR1		(0x0240)
-#define INTMR1		(0x0280)
-#define LCDCON		(0x02c0)
-#define TC1D            (0x0300)
-#define TC2D		(0x0340)
-#define RTCDR		(0x0380)
-#define RTCMR		(0x03c0)
-#define PMPCON		(0x0400)
-#define CODR		(0x0440)
-#define UARTDR1		(0x0480)
-#define UBRLCR1		(0x04c0)
-#define SYNCIO		(0x0500)
-#define PALLSW		(0x0540)
-#define PALMSW		(0x0580)
-#define STFCLR		(0x05c0)
-#define BLEOI		(0x0600)
-#define MCEOI		(0x0640)
-#define TEOI		(0x0680)
-#define TC1EOI		(0x06c0)
-#define TC2EOI		(0x0700)
-#define RTCEOI		(0x0740)
-#define UMSEOI		(0x0780)
-#define COEOI		(0x07c0)
-#define HALT		(0x0800)
-#define STDBY		(0x0840)
-
-#define FBADDR		(0x1000)
-#define SYSCON2		(0x1100)
-#define SYSFLG2		(0x1140)
-#define INTSR2		(0x1240)
-#define INTMR2		(0x1280)
-#define UARTDR2		(0x1480)
-#define UBRLCR2		(0x14c0)
-#define SS2DR		(0x1500)
-#define SRXEOF		(0x1600)
-#define SS2POP		(0x16c0)
-#define KBDEOI		(0x1700)
-
-/* common bits: SYSCON1 / SYSCON2 */
-#define SYSCON_UARTEN		(1 << 8)
-
-#define SYSCON1_KBDSCAN(x)	((x) & 15)
-#define SYSCON1_KBDSCANMASK	(15)
-#define SYSCON1_TC1M		(1 << 4)
-#define SYSCON1_TC1S		(1 << 5)
-#define SYSCON1_TC2M		(1 << 6)
-#define SYSCON1_TC2S		(1 << 7)
-#define SYSCON1_UART1EN		SYSCON_UARTEN
-#define SYSCON1_BZTOG		(1 << 9)
-#define SYSCON1_BZMOD		(1 << 10)
-#define SYSCON1_DBGEN		(1 << 11)
-#define SYSCON1_LCDEN		(1 << 12)
-#define SYSCON1_CDENTX		(1 << 13)
-#define SYSCON1_CDENRX		(1 << 14)
-#define SYSCON1_SIREN		(1 << 15)
-#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
-#define SYSCON1_ADCKSEL_MASK	(3 << 16)
-#define SYSCON1_EXCKEN		(1 << 18)
-#define SYSCON1_WAKEDIS		(1 << 19)
-#define SYSCON1_IRTXM		(1 << 20)
-
-/* common bits: SYSFLG1 / SYSFLG2 */
-#define SYSFLG_UBUSY		(1 << 11)
-#define SYSFLG_URXFE		(1 << 22)
-#define SYSFLG_UTXFF		(1 << 23)
-
-#define SYSFLG1_MCDR		(1 << 0)
-#define SYSFLG1_DCDET		(1 << 1)
-#define SYSFLG1_WUDR		(1 << 2)
-#define SYSFLG1_WUON		(1 << 3)
-#define SYSFLG1_CTS		(1 << 8)
-#define SYSFLG1_DSR		(1 << 9)
-#define SYSFLG1_DCD		(1 << 10)
-#define SYSFLG1_UBUSY		SYSFLG_UBUSY
-#define SYSFLG1_NBFLG		(1 << 12)
-#define SYSFLG1_RSTFLG		(1 << 13)
-#define SYSFLG1_PFFLG		(1 << 14)
-#define SYSFLG1_CLDFLG		(1 << 15)
-#define SYSFLG1_URXFE		SYSFLG_URXFE
-#define SYSFLG1_UTXFF		SYSFLG_UTXFF
-#define SYSFLG1_CRXFE		(1 << 24)
-#define SYSFLG1_CTXFF		(1 << 25)
-#define SYSFLG1_SSIBUSY		(1 << 26)
-#define SYSFLG1_ID		(1 << 29)
-
-#define SYSFLG2_SSRXOF		(1 << 0)
-#define SYSFLG2_RESVAL		(1 << 1)
-#define SYSFLG2_RESFRM		(1 << 2)
-#define SYSFLG2_SS2RXFE		(1 << 3)
-#define SYSFLG2_SS2TXFF		(1 << 4)
-#define SYSFLG2_SS2TXUF		(1 << 5)
-#define SYSFLG2_CKMODE		(1 << 6)
-#define SYSFLG2_UBUSY		SYSFLG_UBUSY
-#define SYSFLG2_URXFE		SYSFLG_URXFE
-#define SYSFLG2_UTXFF		SYSFLG_UTXFF
-
-#define LCDCON_GSEN		(1 << 30)
-#define LCDCON_GSMD		(1 << 31)
-
-#define SYSCON2_SERSEL		(1 << 0)
-#define SYSCON2_KBD6		(1 << 1)
-#define SYSCON2_DRAMZ		(1 << 2)
-#define SYSCON2_KBWEN		(1 << 3)
-#define SYSCON2_SS2TXEN		(1 << 4)
-#define SYSCON2_PCCARD1		(1 << 5)
-#define SYSCON2_PCCARD2		(1 << 6)
-#define SYSCON2_SS2RXEN		(1 << 7)
-#define SYSCON2_UART2EN		SYSCON_UARTEN
-#define SYSCON2_SS2MAEN		(1 << 9)
-#define SYSCON2_OSTB		(1 << 12)
-#define SYSCON2_CLKENSL		(1 << 13)
-#define SYSCON2_BUZFREQ		(1 << 14)
-
-/* common bits: UARTDR1 / UARTDR2 */
-#define UARTDR_FRMERR		(1 << 8)
-#define UARTDR_PARERR		(1 << 9)
-#define UARTDR_OVERR		(1 << 10)
-
-/* common bits: UBRLCR1 / UBRLCR2 */
-#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
-#define UBRLCR_BREAK		(1 << 12)
-#define UBRLCR_PRTEN		(1 << 13)
-#define UBRLCR_EVENPRT		(1 << 14)
-#define UBRLCR_XSTOP		(1 << 15)
-#define UBRLCR_FIFOEN		(1 << 16)
-#define UBRLCR_WRDLEN5		(0 << 17)
-#define UBRLCR_WRDLEN6		(1 << 17)
-#define UBRLCR_WRDLEN7		(2 << 17)
-#define UBRLCR_WRDLEN8		(3 << 17)
-#define UBRLCR_WRDLEN_MASK	(3 << 17)
-
-#define SYNCIO_SMCKEN		(1 << 13)
-#define SYNCIO_TXFRMEN		(1 << 14)
-
-#endif /* __ASM_HARDWARE_CLPS7111_H */
diff --git a/include/asm-arm/hardware/cs89712.h b/include/asm-arm/hardware/cs89712.h
deleted file mode 100644
index ad99a3e1b802..000000000000
--- a/include/asm-arm/hardware/cs89712.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/cs89712.h
- *
- *  This file contains the hardware definitions of the CS89712
- *  additional internal registers.
- *
- *  Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de>
- *			
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_CS89712_H
-#define __ASM_HARDWARE_CS89712_H
-
-/*
-*	CS89712 additional registers
-*/
-                                  
-#define PCDR			0x0002	/* Port C Data register ---------------------------- */
-#define PCDDR			0x0042	/* Port C Data Direction register ------------------ */
-#define SDCONF			0x2300  /* SDRAM Configuration register ---------------------*/
-#define SDRFPR			0x2340  /* SDRAM Refresh period register --------------------*/
-
-#define SDCONF_ACTIVE		(1 << 10)
-#define SDCONF_CLKCTL		(1 << 9)
-#define SDCONF_WIDTH_4		(0 << 7)
-#define SDCONF_WIDTH_8		(1 << 7)
-#define SDCONF_WIDTH_16		(2 << 7)
-#define SDCONF_WIDTH_32		(3 << 7)
-#define SDCONF_SIZE_16		(0 << 5)
-#define SDCONF_SIZE_64		(1 << 5)
-#define SDCONF_SIZE_128		(2 << 5)
-#define SDCONF_SIZE_256		(3 << 5)
-#define SDCONF_CASLAT_2		(2)
-#define SDCONF_CASLAT_3		(3)
-
-#endif /* __ASM_HARDWARE_CS89712_H */
diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S
deleted file mode 100644
index 07c97fb233fc..000000000000
--- a/include/asm-arm/hardware/debug-8250.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/debug-8250.S
- *
- *  Copyright (C) 1994-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/serial_reg.h>
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#ifdef FLOW_CONTROL
-1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
-		tst	\rd, #UART_MSR_CTS
-		beq	1001b
-#endif
-		.endm
diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S
deleted file mode 100644
index 23c541a9e89a..000000000000
--- a/include/asm-arm/hardware/debug-pl01x.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/hardware/debug-pl01x.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <linux/amba/serial.h>
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx, #UART01x_DR]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UART01x_FR]
-		tst	\rd, #UART01x_FR_TXFF
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UART01x_FR]
-		tst	\rd, #UART01x_FR_BUSY
-		bne	1001b
-		.endm
diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h
deleted file mode 100644
index 546f7077be9c..000000000000
--- a/include/asm-arm/hardware/dec21285.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/dec21285.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  DC21285 registers
- */
-#define DC21285_PCI_IACK		0x79000000
-#define DC21285_ARMCSR_BASE		0x42000000
-#define DC21285_PCI_TYPE_0_CONFIG	0x7b000000
-#define DC21285_PCI_TYPE_1_CONFIG	0x7a000000
-#define DC21285_OUTBOUND_WRITE_FLUSH	0x78000000
-#define DC21285_FLASH			0x41000000
-#define DC21285_PCI_IO			0x7c000000
-#define DC21285_PCI_MEM			0x80000000
-
-#ifndef __ASSEMBLY__
-#include <asm/hardware.h>
-#define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
-#else
-#define DC21285_IO(x)		(x)
-#endif
-
-#define CSR_PCICMD		DC21285_IO(0x0004)
-#define CSR_CLASSREV		DC21285_IO(0x0008)
-#define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
-#define CSR_PCICSRBASE		DC21285_IO(0x0010)
-#define CSR_PCICSRIOBASE	DC21285_IO(0x0014)
-#define CSR_PCISDRAMBASE	DC21285_IO(0x0018)
-#define CSR_PCIROMBASE		DC21285_IO(0x0030)
-#define CSR_MBOX0		DC21285_IO(0x0050)
-#define CSR_MBOX1		DC21285_IO(0x0054)
-#define CSR_MBOX2		DC21285_IO(0x0058)
-#define CSR_MBOX3		DC21285_IO(0x005c)
-#define CSR_DOORBELL		DC21285_IO(0x0060)
-#define CSR_DOORBELL_SETUP	DC21285_IO(0x0064)
-#define CSR_ROMWRITEREG		DC21285_IO(0x0068)
-#define CSR_CSRBASEMASK		DC21285_IO(0x00f8)
-#define CSR_CSRBASEOFFSET	DC21285_IO(0x00fc)
-#define CSR_SDRAMBASEMASK	DC21285_IO(0x0100)
-#define CSR_SDRAMBASEOFFSET	DC21285_IO(0x0104)
-#define CSR_ROMBASEMASK		DC21285_IO(0x0108)
-#define CSR_SDRAMTIMING		DC21285_IO(0x010c)
-#define CSR_SDRAMADDRSIZE0	DC21285_IO(0x0110)
-#define CSR_SDRAMADDRSIZE1	DC21285_IO(0x0114)
-#define CSR_SDRAMADDRSIZE2	DC21285_IO(0x0118)
-#define CSR_SDRAMADDRSIZE3	DC21285_IO(0x011c)
-#define CSR_I2O_INFREEHEAD	DC21285_IO(0x0120)
-#define CSR_I2O_INPOSTTAIL	DC21285_IO(0x0124)
-#define CSR_I2O_OUTPOSTHEAD	DC21285_IO(0x0128)
-#define CSR_I2O_OUTFREETAIL	DC21285_IO(0x012c)
-#define CSR_I2O_INFREECOUNT	DC21285_IO(0x0130)
-#define CSR_I2O_OUTPOSTCOUNT	DC21285_IO(0x0134)
-#define CSR_I2O_INPOSTCOUNT	DC21285_IO(0x0138)
-#define CSR_SA110_CNTL		DC21285_IO(0x013c)
-#define SA110_CNTL_INITCMPLETE		(1 << 0)
-#define SA110_CNTL_ASSERTSERR		(1 << 1)
-#define SA110_CNTL_RXSERR		(1 << 3)
-#define SA110_CNTL_SA110DRAMPARITY	(1 << 4)
-#define SA110_CNTL_PCISDRAMPARITY	(1 << 5)
-#define SA110_CNTL_DMASDRAMPARITY	(1 << 6)
-#define SA110_CNTL_DISCARDTIMER		(1 << 8)
-#define SA110_CNTL_PCINRESET		(1 << 9)
-#define SA110_CNTL_I2O_256		(0 << 10)
-#define SA110_CNTL_I20_512		(1 << 10)
-#define SA110_CNTL_I2O_1024		(2 << 10)
-#define SA110_CNTL_I2O_2048		(3 << 10)
-#define SA110_CNTL_I2O_4096		(4 << 10)
-#define SA110_CNTL_I2O_8192		(5 << 10)
-#define SA110_CNTL_I2O_16384		(6 << 10)
-#define SA110_CNTL_I2O_32768		(7 << 10)
-#define SA110_CNTL_WATCHDOG		(1 << 13)
-#define SA110_CNTL_ROMWIDTH_UNDEF	(0 << 14)
-#define SA110_CNTL_ROMWIDTH_16		(1 << 14)
-#define SA110_CNTL_ROMWIDTH_32		(2 << 14)
-#define SA110_CNTL_ROMWIDTH_8		(3 << 14)
-#define SA110_CNTL_ROMACCESSTIME(x)	((x)<<16)
-#define SA110_CNTL_ROMBURSTTIME(x)	((x)<<20)
-#define SA110_CNTL_ROMTRISTATETIME(x)	((x)<<24)
-#define SA110_CNTL_XCSDIR(x)		((x)<<28)
-#define SA110_CNTL_PCICFN		(1 << 31)
-
-/*
- * footbridge_cfn_mode() is used when we want
- * to check whether we are the central function
- */
-#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
-#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
-#define footbridge_cfn_mode() __footbridge_cfn_mode()
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-#define footbridge_cfn_mode() (1)
-#else
-#define footbridge_cfn_mode() (0)
-#endif
-
-#define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
-#define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
-#define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
-#define CSR_XBUS_IOSTROBE	DC21285_IO(0x014c)
-#define CSR_DOORBELL_PCI	DC21285_IO(0x0150)
-#define CSR_DOORBELL_SA110	DC21285_IO(0x0154)
-#define CSR_UARTDR		DC21285_IO(0x0160)
-#define CSR_RXSTAT		DC21285_IO(0x0164)
-#define CSR_H_UBRLCR		DC21285_IO(0x0168)
-#define CSR_M_UBRLCR		DC21285_IO(0x016c)
-#define CSR_L_UBRLCR		DC21285_IO(0x0170)
-#define CSR_UARTCON		DC21285_IO(0x0174)
-#define CSR_UARTFLG		DC21285_IO(0x0178)
-#define CSR_IRQ_STATUS		DC21285_IO(0x0180)
-#define CSR_IRQ_RAWSTATUS	DC21285_IO(0x0184)
-#define CSR_IRQ_ENABLE		DC21285_IO(0x0188)
-#define CSR_IRQ_DISABLE		DC21285_IO(0x018c)
-#define CSR_IRQ_SOFT		DC21285_IO(0x0190)
-#define CSR_FIQ_STATUS		DC21285_IO(0x0280)
-#define CSR_FIQ_RAWSTATUS	DC21285_IO(0x0284)
-#define CSR_FIQ_ENABLE		DC21285_IO(0x0288)
-#define CSR_FIQ_DISABLE		DC21285_IO(0x028c)
-#define CSR_FIQ_SOFT		DC21285_IO(0x0290)
-#define CSR_TIMER1_LOAD		DC21285_IO(0x0300)
-#define CSR_TIMER1_VALUE	DC21285_IO(0x0304)
-#define CSR_TIMER1_CNTL		DC21285_IO(0x0308)
-#define CSR_TIMER1_CLR		DC21285_IO(0x030c)
-#define CSR_TIMER2_LOAD		DC21285_IO(0x0320)
-#define CSR_TIMER2_VALUE	DC21285_IO(0x0324)
-#define CSR_TIMER2_CNTL		DC21285_IO(0x0328)
-#define CSR_TIMER2_CLR		DC21285_IO(0x032c)
-#define CSR_TIMER3_LOAD		DC21285_IO(0x0340)
-#define CSR_TIMER3_VALUE	DC21285_IO(0x0344)
-#define CSR_TIMER3_CNTL		DC21285_IO(0x0348)
-#define CSR_TIMER3_CLR		DC21285_IO(0x034c)
-#define CSR_TIMER4_LOAD		DC21285_IO(0x0360)
-#define CSR_TIMER4_VALUE	DC21285_IO(0x0364)
-#define CSR_TIMER4_CNTL		DC21285_IO(0x0368)
-#define CSR_TIMER4_CLR		DC21285_IO(0x036c)
-
-#define TIMER_CNTL_ENABLE	(1 << 7)
-#define TIMER_CNTL_AUTORELOAD	(1 << 6)
-#define TIMER_CNTL_DIV1		(0)
-#define TIMER_CNTL_DIV16	(1 << 2)
-#define TIMER_CNTL_DIV256	(2 << 2)
-#define TIMER_CNTL_CNTEXT	(3 << 2)
-
-
diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S
deleted file mode 100644
index 9bb580a5b15e..000000000000
--- a/include/asm-arm/hardware/entry-macro-iomd.S
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * include/asm-arm/hardware/entry-macro-iomd.S
- *
- * Low-level IRQ helper macros for IOC/IOMD based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/* IOC / IOMD based hardware */
-#include <asm/hardware/iomd.h>
-
-		.macro	disable_fiq
-		mov	r12, #ioc_base_high
-		.if	ioc_base_low
-		orr	r12, r12, #ioc_base_low
-		.endif
-		strb	r12, [r12, #0x38]	@ Disable FIQ register
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
-		ldr	\tmp, =irq_prio_h
-		teq	\irqstat, #0
-#ifdef IOMD_BASE
-		ldreqb	\irqstat, [\base, #IOMD_DMAREQ]	@ get dma
-		addeq	\tmp, \tmp, #256		@ irq_prio_h table size
-		teqeq	\irqstat, #0
-		bne	2406f
-#endif
-		ldreqb	\irqstat, [\base, #IOMD_IRQREQA]	@ get low priority
-		addeq	\tmp, \tmp, #256		@ irq_prio_d table size
-		teqeq	\irqstat, #0
-#ifdef IOMD_IRQREQC
-		ldreqb	\irqstat, [\base, #IOMD_IRQREQC]
-		addeq	\tmp, \tmp, #256		@ irq_prio_l table size
-		teqeq	\irqstat, #0
-#endif
-#ifdef IOMD_IRQREQD
-		ldreqb	\irqstat, [\base, #IOMD_IRQREQD]
-		addeq	\tmp, \tmp, #256		@ irq_prio_lc table size
-		teqeq	\irqstat, #0
-#endif
-2406:		ldrneb	\irqnr, [\tmp, \irqstat]	@ get IRQ number
-		.endm
-
-/*
- * Interrupt table (incorporates priority).  Please note that we
- * rely on the order of these tables (see above code).
- */
-		.align	5
-irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-#ifdef IOMD_BASE
-irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-#endif
-irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-#ifdef IOMD_IRQREQC
-irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-#endif
-#ifdef IOMD_IRQREQD
-irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-#endif
-
diff --git a/include/asm-arm/hardware/ep7211.h b/include/asm-arm/hardware/ep7211.h
deleted file mode 100644
index 017aa68f612d..000000000000
--- a/include/asm-arm/hardware/ep7211.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/ep7211.h
- *
- *  This file contains the hardware definitions of the EP7211 internal
- *  registers.
- *
- *  Copyright (C) 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_EP7211_H
-#define __ASM_HARDWARE_EP7211_H
-
-#include <asm/hardware/clps7111.h>
-
-/*
- * define EP7211_BASE to be the base address of the region
- * you want to access.
- */
-
-#define EP7211_PHYS_BASE	(0x80000000)
-
-/*
- * XXX miket@bluemug.com: need to introduce EP7211 registers (those not
- * present in 7212) here.
- */
-
-#endif /* __ASM_HARDWARE_EP7211_H */
diff --git a/include/asm-arm/hardware/ep7212.h b/include/asm-arm/hardware/ep7212.h
deleted file mode 100644
index 0e952e747073..000000000000
--- a/include/asm-arm/hardware/ep7212.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/ep7212.h
- *
- *  This file contains the hardware definitions of the EP7212 internal
- *  registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_EP7212_H
-#define __ASM_HARDWARE_EP7212_H
-
-/*
- * define EP7212_BASE to be the base address of the region
- * you want to access.
- */
-
-#define EP7212_PHYS_BASE	(0x80000000)
-
-#ifndef __ASSEMBLY__
-#define ep_readl(off)		__raw_readl(EP7212_BASE + (off))
-#define ep_writel(val,off)	__raw_writel(val, EP7212_BASE + (off))
-#endif
-
-/*
- * These registers are specific to the EP7212 only
- */
-#define DAIR			0x2000
-#define DAIR0			0x2040
-#define DAIDR1			0x2080
-#define DAIDR2			0x20c0
-#define DAISR			0x2100
-#define SYSCON3			0x2200
-#define INTSR3			0x2240
-#define INTMR3			0x2280
-#define LEDFLSH			0x22c0
-
-#define DAIR_DAIEN		(1 << 16)
-#define DAIR_ECS		(1 << 17)
-#define DAIR_LCTM		(1 << 19)
-#define DAIR_LCRM		(1 << 20)
-#define DAIR_RCTM		(1 << 21)
-#define DAIR_RCRM		(1 << 22)
-#define DAIR_LBM		(1 << 23)
-
-#define DAIDR2_FIFOEN		(1 << 15)
-#define DAIDR2_FIFOLEFT		(0x0d << 16)
-#define DAIDR2_FIFORIGHT	(0x11 << 16)
-
-#define DAISR_RCTS		(1 << 0)
-#define DAISR_RCRS		(1 << 1)
-#define DAISR_LCTS		(1 << 2)
-#define DAISR_LCRS		(1 << 3)
-#define DAISR_RCTU		(1 << 4)
-#define DAISR_RCRO		(1 << 5)
-#define DAISR_LCTU		(1 << 6)
-#define DAISR_LCRO		(1 << 7)
-#define DAISR_RCNF		(1 << 8)
-#define DAISR_RCNE		(1 << 9)
-#define DAISR_LCNF		(1 << 10)
-#define DAISR_LCNE		(1 << 11)
-#define DAISR_FIFO		(1 << 12)
-
-#define SYSCON3_ADCCON		(1 << 0)
-#define SYSCON3_DAISEL		(1 << 3)
-#define SYSCON3_ADCCKNSEN	(1 << 4)
-#define SYSCON3_FASTWAKE	(1 << 8)
-#define SYSCON3_DAIEN		(1 << 9)
-
-#endif /* __ASM_HARDWARE_EP7212_H */
diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h
deleted file mode 100644
index 966e428ad32c..000000000000
--- a/include/asm-arm/hardware/gic.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/gic.h
- *
- *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_HARDWARE_GIC_H
-#define __ASM_ARM_HARDWARE_GIC_H
-
-#include <linux/compiler.h>
-
-#define GIC_CPU_CTRL			0x00
-#define GIC_CPU_PRIMASK			0x04
-#define GIC_CPU_BINPOINT		0x08
-#define GIC_CPU_INTACK			0x0c
-#define GIC_CPU_EOI			0x10
-#define GIC_CPU_RUNNINGPRI		0x14
-#define GIC_CPU_HIGHPRI			0x18
-
-#define GIC_DIST_CTRL			0x000
-#define GIC_DIST_CTR			0x004
-#define GIC_DIST_ENABLE_SET		0x100
-#define GIC_DIST_ENABLE_CLEAR		0x180
-#define GIC_DIST_PENDING_SET		0x200
-#define GIC_DIST_PENDING_CLEAR		0x280
-#define GIC_DIST_ACTIVE_BIT		0x300
-#define GIC_DIST_PRI			0x400
-#define GIC_DIST_TARGET			0x800
-#define GIC_DIST_CONFIG			0xc00
-#define GIC_DIST_SOFTINT		0xf00
-
-#ifndef __ASSEMBLY__
-void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
-void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
-void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
-#endif
-
-#endif
diff --git a/include/asm-arm/hardware/icst307.h b/include/asm-arm/hardware/icst307.h
deleted file mode 100644
index ff8618a441c0..000000000000
--- a/include/asm-arm/hardware/icst307.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/icst307.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICS307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This file is similar to the icst525.h file
- */
-#ifndef ASMARM_HARDWARE_ICST307_H
-#define ASMARM_HARDWARE_ICST307_H
-
-struct icst307_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst307_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
-struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
-struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
-
-#endif
diff --git a/include/asm-arm/hardware/icst525.h b/include/asm-arm/hardware/icst525.h
deleted file mode 100644
index edd5a5704406..000000000000
--- a/include/asm-arm/hardware/icst525.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/icst525.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#ifndef ASMARM_HARDWARE_ICST525_H
-#define ASMARM_HARDWARE_ICST525_H
-
-struct icst525_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst525_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
-struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
-struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
-
-#endif
diff --git a/include/asm-arm/hardware/ioc.h b/include/asm-arm/hardware/ioc.h
deleted file mode 100644
index b3b46ef65943..000000000000
--- a/include/asm-arm/hardware/ioc.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/ioc.h
- *
- *  Copyright (C) Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Use these macros to read/write the IOC.  All it does is perform the actual
- *  read/write.
- */
-#ifndef __ASMARM_HARDWARE_IOC_H
-#define __ASMARM_HARDWARE_IOC_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use __raw_base variants here so that we give the compiler the
- * chance to keep IOC_BASE in a register.
- */
-#define ioc_readb(off)		__raw_readb(IOC_BASE + (off))
-#define ioc_writeb(val,off)	__raw_writeb(val, IOC_BASE + (off))
-
-#endif
-
-#define IOC_CONTROL	(0x00)
-#define IOC_KARTTX	(0x04)
-#define IOC_KARTRX	(0x04)
-
-#define IOC_IRQSTATA	(0x10)
-#define IOC_IRQREQA	(0x14)
-#define IOC_IRQCLRA	(0x14)
-#define IOC_IRQMASKA	(0x18)
-
-#define IOC_IRQSTATB	(0x20)
-#define IOC_IRQREQB	(0x24)
-#define IOC_IRQMASKB	(0x28)
-
-#define IOC_FIQSTAT	(0x30)
-#define IOC_FIQREQ	(0x34)
-#define IOC_FIQMASK	(0x38)
-
-#define IOC_T0CNTL	(0x40)
-#define IOC_T0LTCHL	(0x40)
-#define IOC_T0CNTH	(0x44)
-#define IOC_T0LTCHH	(0x44)
-#define IOC_T0GO	(0x48)
-#define IOC_T0LATCH	(0x4c)
-
-#define IOC_T1CNTL	(0x50)
-#define IOC_T1LTCHL	(0x50)
-#define IOC_T1CNTH	(0x54)
-#define IOC_T1LTCHH	(0x54)
-#define IOC_T1GO	(0x58)
-#define IOC_T1LATCH	(0x5c)
-
-#define IOC_T2CNTL	(0x60)
-#define IOC_T2LTCHL	(0x60)
-#define IOC_T2CNTH	(0x64)
-#define IOC_T2LTCHH	(0x64)
-#define IOC_T2GO	(0x68)
-#define IOC_T2LATCH	(0x6c)
-
-#define IOC_T3CNTL	(0x70)
-#define IOC_T3LTCHL	(0x70)
-#define IOC_T3CNTH	(0x74)
-#define IOC_T3LTCHH	(0x74)
-#define IOC_T3GO	(0x78)
-#define IOC_T3LATCH	(0x7c)
-
-#endif
diff --git a/include/asm-arm/hardware/iomd.h b/include/asm-arm/hardware/iomd.h
deleted file mode 100644
index 396e55ad06c6..000000000000
--- a/include/asm-arm/hardware/iomd.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/iomd.h
- *
- *  Copyright (C) 1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains information out the IOMD ASIC used in the
- *  Acorn RiscPC and subsequently integrated into the CLPS7500 chips.
- */
-#ifndef __ASMARM_HARDWARE_IOMD_H
-#define __ASMARM_HARDWARE_IOMD_H
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use __raw_base variants here so that we give the compiler the
- * chance to keep IOC_BASE in a register.
- */
-#define iomd_readb(off)		__raw_readb(IOMD_BASE + (off))
-#define iomd_readl(off)		__raw_readl(IOMD_BASE + (off))
-#define iomd_writeb(val,off)	__raw_writeb(val, IOMD_BASE + (off))
-#define iomd_writel(val,off)	__raw_writel(val, IOMD_BASE + (off))
-
-#endif
-
-#define IOMD_CONTROL	(0x000)
-#define IOMD_KARTTX	(0x004)
-#define IOMD_KARTRX	(0x004)
-#define IOMD_KCTRL	(0x008)
-
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IOLINES	(0x00C)
-#endif
-
-#define IOMD_IRQSTATA	(0x010)
-#define IOMD_IRQREQA	(0x014)
-#define IOMD_IRQCLRA	(0x014)
-#define IOMD_IRQMASKA	(0x018)
-
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_SUSMODE	(0x01C)
-#endif
-
-#define IOMD_IRQSTATB	(0x020)
-#define IOMD_IRQREQB	(0x024)
-#define IOMD_IRQMASKB	(0x028)
-
-#define IOMD_FIQSTAT	(0x030)
-#define IOMD_FIQREQ	(0x034)
-#define IOMD_FIQMASK	(0x038)
-
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_CLKCTL	(0x03C)
-#endif
-
-#define IOMD_T0CNTL	(0x040)
-#define IOMD_T0LTCHL	(0x040)
-#define IOMD_T0CNTH	(0x044)
-#define IOMD_T0LTCHH	(0x044)
-#define IOMD_T0GO	(0x048)
-#define IOMD_T0LATCH	(0x04c)
-
-#define IOMD_T1CNTL	(0x050)
-#define IOMD_T1LTCHL	(0x050)
-#define IOMD_T1CNTH	(0x054)
-#define IOMD_T1LTCHH	(0x054)
-#define IOMD_T1GO	(0x058)
-#define IOMD_T1LATCH	(0x05c)
-
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_IRQSTATC	(0x060)
-#define IOMD_IRQREQC	(0x064)
-#define IOMD_IRQMASKC	(0x068)
-
-#define IOMD_VIDMUX	(0x06c)
-
-#define IOMD_IRQSTATD	(0x070)
-#define IOMD_IRQREQD	(0x074)
-#define IOMD_IRQMASKD	(0x078)
-#endif
-
-#define IOMD_ROMCR0	(0x080)
-#define IOMD_ROMCR1	(0x084)
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DRAMCR	(0x088)
-#endif
-#define IOMD_REFCR	(0x08C)
-
-#define IOMD_FSIZE	(0x090)
-#define IOMD_ID0	(0x094)
-#define IOMD_ID1	(0x098)
-#define IOMD_VERSION	(0x09C)
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_MOUSEX	(0x0A0)
-#define IOMD_MOUSEY	(0x0A4)
-#endif
-
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_MSEDAT	(0x0A8)
-#define IOMD_MSECTL	(0x0Ac)
-#endif
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DMATCR	(0x0C0)
-#endif
-#define IOMD_IOTCR	(0x0C4)
-#define IOMD_ECTCR	(0x0C8)
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DMAEXT	(0x0CC)
-#endif
-#ifdef CONFIG_ARCH_CLPS7500
-#define IOMD_ASTCR	(0x0CC)
-#define IOMD_DRAMCR	(0x0D0)
-#define IOMD_SELFREF	(0x0D4)
-#define IOMD_ATODICR	(0x0E0)
-#define IOMD_ATODSR	(0x0E4)
-#define IOMD_ATODCC	(0x0E8)
-#define IOMD_ATODCNT1	(0x0EC)
-#define IOMD_ATODCNT2	(0x0F0)
-#define IOMD_ATODCNT3	(0x0F4)
-#define IOMD_ATODCNT4	(0x0F8)
-#endif
-
-#ifdef CONFIG_ARCH_RPC
-#define DMA_EXT_IO0	1
-#define DMA_EXT_IO1	2
-#define DMA_EXT_IO2	4
-#define DMA_EXT_IO3	8
-
-#define IOMD_IO0CURA	(0x100)
-#define IOMD_IO0ENDA	(0x104)
-#define IOMD_IO0CURB	(0x108)
-#define IOMD_IO0ENDB	(0x10C)
-#define IOMD_IO0CR	(0x110)
-#define IOMD_IO0ST	(0x114)
-
-#define IOMD_IO1CURA	(0x120)
-#define IOMD_IO1ENDA	(0x124)
-#define IOMD_IO1CURB	(0x128)
-#define IOMD_IO1ENDB	(0x12C)
-#define IOMD_IO1CR	(0x130)
-#define IOMD_IO1ST	(0x134)
-
-#define IOMD_IO2CURA	(0x140)
-#define IOMD_IO2ENDA	(0x144)
-#define IOMD_IO2CURB	(0x148)
-#define IOMD_IO2ENDB	(0x14C)
-#define IOMD_IO2CR	(0x150)
-#define IOMD_IO2ST	(0x154)
-
-#define IOMD_IO3CURA	(0x160)
-#define IOMD_IO3ENDA	(0x164)
-#define IOMD_IO3CURB	(0x168)
-#define IOMD_IO3ENDB	(0x16C)
-#define IOMD_IO3CR	(0x170)
-#define IOMD_IO3ST	(0x174)
-#endif
-
-#define IOMD_SD0CURA	(0x180)
-#define IOMD_SD0ENDA	(0x184)
-#define IOMD_SD0CURB	(0x188)
-#define IOMD_SD0ENDB	(0x18C)
-#define IOMD_SD0CR	(0x190)
-#define IOMD_SD0ST	(0x194)
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_SD1CURA	(0x1A0)
-#define IOMD_SD1ENDA	(0x1A4)
-#define IOMD_SD1CURB	(0x1A8)
-#define IOMD_SD1ENDB	(0x1AC)
-#define IOMD_SD1CR	(0x1B0)
-#define IOMD_SD1ST	(0x1B4)
-#endif
-
-#define IOMD_CURSCUR	(0x1C0)
-#define IOMD_CURSINIT	(0x1C4)
-
-#define IOMD_VIDCUR	(0x1D0)
-#define IOMD_VIDEND	(0x1D4)
-#define IOMD_VIDSTART	(0x1D8)
-#define IOMD_VIDINIT	(0x1DC)
-#define IOMD_VIDCR	(0x1E0)
-
-#define IOMD_DMASTAT	(0x1F0)
-#define IOMD_DMAREQ	(0x1F4)
-#define IOMD_DMAMASK	(0x1F8)
-
-#define DMA_END_S	(1 << 31)
-#define DMA_END_L	(1 << 30)
-
-#define DMA_CR_C	0x80
-#define DMA_CR_D	0x40
-#define DMA_CR_E	0x20
-
-#define DMA_ST_OFL	4
-#define DMA_ST_INT	2
-#define DMA_ST_AB	1
-
-/*
- * DMA (MEMC) compatibility
- */
-#define HALF_SAM	vram_half_sam
-#define VDMA_ALIGNMENT	(HALF_SAM * 2)
-#define VDMA_XFERSIZE	(HALF_SAM)
-#define VDMA_INIT	IOMD_VIDINIT
-#define VDMA_START	IOMD_VIDSTART
-#define VDMA_END	IOMD_VIDEND
-
-#ifndef __ASSEMBLY__
-extern unsigned int vram_half_sam;
-#define video_set_dma(start,end,offset)				\
-do {								\
-	outl (SCREEN_START + start, VDMA_START);		\
-	outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END);	\
-	if (offset >= end - VDMA_XFERSIZE)			\
-		offset |= 0x40000000;				\
-	outl (SCREEN_START + offset, VDMA_INIT);		\
-} while (0)
-#endif
-
-#endif
diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h
deleted file mode 100644
index a32b86ac62aa..000000000000
--- a/include/asm-arm/hardware/iop3xx-adma.h
+++ /dev/null
@@ -1,888 +0,0 @@
-/*
- * Copyright © 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _ADMA_H
-#define _ADMA_H
-#include <linux/types.h>
-#include <linux/io.h>
-#include <asm/hardware.h>
-#include <asm/hardware/iop_adma.h>
-
-/* Memory copy units */
-#define DMA_CCR(chan)		(chan->mmr_base + 0x0)
-#define DMA_CSR(chan)		(chan->mmr_base + 0x4)
-#define DMA_DAR(chan)		(chan->mmr_base + 0xc)
-#define DMA_NDAR(chan)		(chan->mmr_base + 0x10)
-#define DMA_PADR(chan)		(chan->mmr_base + 0x14)
-#define DMA_PUADR(chan)	(chan->mmr_base + 0x18)
-#define DMA_LADR(chan)		(chan->mmr_base + 0x1c)
-#define DMA_BCR(chan)		(chan->mmr_base + 0x20)
-#define DMA_DCR(chan)		(chan->mmr_base + 0x24)
-
-/* Application accelerator unit  */
-#define AAU_ACR(chan)		(chan->mmr_base + 0x0)
-#define AAU_ASR(chan)		(chan->mmr_base + 0x4)
-#define AAU_ADAR(chan)		(chan->mmr_base + 0x8)
-#define AAU_ANDAR(chan)	(chan->mmr_base + 0xc)
-#define AAU_SAR(src, chan)	(chan->mmr_base + (0x10 + ((src) << 2)))
-#define AAU_DAR(chan)		(chan->mmr_base + 0x20)
-#define AAU_ABCR(chan)		(chan->mmr_base + 0x24)
-#define AAU_ADCR(chan)		(chan->mmr_base + 0x28)
-#define AAU_SAR_EDCR(src_edc)	(chan->mmr_base + (0x02c + ((src_edc-4) << 2)))
-#define AAU_EDCR0_IDX	8
-#define AAU_EDCR1_IDX	17
-#define AAU_EDCR2_IDX	26
-
-#define DMA0_ID 0
-#define DMA1_ID 1
-#define AAU_ID 2
-
-struct iop3xx_aau_desc_ctrl {
-	unsigned int int_en:1;
-	unsigned int blk1_cmd_ctrl:3;
-	unsigned int blk2_cmd_ctrl:3;
-	unsigned int blk3_cmd_ctrl:3;
-	unsigned int blk4_cmd_ctrl:3;
-	unsigned int blk5_cmd_ctrl:3;
-	unsigned int blk6_cmd_ctrl:3;
-	unsigned int blk7_cmd_ctrl:3;
-	unsigned int blk8_cmd_ctrl:3;
-	unsigned int blk_ctrl:2;
-	unsigned int dual_xor_en:1;
-	unsigned int tx_complete:1;
-	unsigned int zero_result_err:1;
-	unsigned int zero_result_en:1;
-	unsigned int dest_write_en:1;
-};
-
-struct iop3xx_aau_e_desc_ctrl {
-	unsigned int reserved:1;
-	unsigned int blk1_cmd_ctrl:3;
-	unsigned int blk2_cmd_ctrl:3;
-	unsigned int blk3_cmd_ctrl:3;
-	unsigned int blk4_cmd_ctrl:3;
-	unsigned int blk5_cmd_ctrl:3;
-	unsigned int blk6_cmd_ctrl:3;
-	unsigned int blk7_cmd_ctrl:3;
-	unsigned int blk8_cmd_ctrl:3;
-	unsigned int reserved2:7;
-};
-
-struct iop3xx_dma_desc_ctrl {
-	unsigned int pci_transaction:4;
-	unsigned int int_en:1;
-	unsigned int dac_cycle_en:1;
-	unsigned int mem_to_mem_en:1;
-	unsigned int crc_data_tx_en:1;
-	unsigned int crc_gen_en:1;
-	unsigned int crc_seed_dis:1;
-	unsigned int reserved:21;
-	unsigned int crc_tx_complete:1;
-};
-
-struct iop3xx_desc_dma {
-	u32 next_desc;
-	union {
-		u32 pci_src_addr;
-		u32 pci_dest_addr;
-		u32 src_addr;
-	};
-	union {
-		u32 upper_pci_src_addr;
-		u32 upper_pci_dest_addr;
-	};
-	union {
-		u32 local_pci_src_addr;
-		u32 local_pci_dest_addr;
-		u32 dest_addr;
-	};
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_dma_desc_ctrl desc_ctrl_field;
-	};
-	u32 crc_addr;
-};
-
-struct iop3xx_desc_aau {
-	u32 next_desc;
-	u32 src[4];
-	u32 dest_addr;
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
-	};
-	union {
-		u32 src_addr;
-		u32 e_desc_ctrl;
-		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
-	} src_edc[31];
-};
-
-struct iop3xx_aau_gfmr {
-	unsigned int gfmr1:8;
-	unsigned int gfmr2:8;
-	unsigned int gfmr3:8;
-	unsigned int gfmr4:8;
-};
-
-struct iop3xx_desc_pq_xor {
-	u32 next_desc;
-	u32 src[3];
-	union {
-		u32 data_mult1;
-		struct iop3xx_aau_gfmr data_mult1_field;
-	};
-	u32 dest_addr;
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
-	};
-	union {
-		u32 src_addr;
-		u32 e_desc_ctrl;
-		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
-		u32 data_multiplier;
-		struct iop3xx_aau_gfmr data_mult_field;
-		u32 reserved;
-	} src_edc_gfmr[19];
-};
-
-struct iop3xx_desc_dual_xor {
-	u32 next_desc;
-	u32 src0_addr;
-	u32 src1_addr;
-	u32 h_src_addr;
-	u32 d_src_addr;
-	u32 h_dest_addr;
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
-	};
-	u32 d_dest_addr;
-};
-
-union iop3xx_desc {
-	struct iop3xx_desc_aau *aau;
-	struct iop3xx_desc_dma *dma;
-	struct iop3xx_desc_pq_xor *pq_xor;
-	struct iop3xx_desc_dual_xor *dual_xor;
-	void *ptr;
-};
-
-static inline int iop_adma_get_max_xor(void)
-{
-	return 32;
-}
-
-static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
-{
-	int id = chan->device->id;
-
-	switch (id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return __raw_readl(DMA_DAR(chan));
-	case AAU_ID:
-		return __raw_readl(AAU_ADAR(chan));
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
-						u32 next_desc_addr)
-{
-	int id = chan->device->id;
-
-	switch (id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		__raw_writel(next_desc_addr, DMA_NDAR(chan));
-		break;
-	case AAU_ID:
-		__raw_writel(next_desc_addr, AAU_ANDAR(chan));
-		break;
-	}
-
-}
-
-#define IOP_ADMA_STATUS_BUSY (1 << 10)
-#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024)
-#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024)
-#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024)
-
-static inline int iop_chan_is_busy(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-	return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0;
-}
-
-static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc,
-					int num_slots)
-{
-	/* num_slots will only ever be 1, 2, 4, or 8 */
-	return (desc->idx & (num_slots - 1)) ? 0 : 1;
-}
-
-/* to do: support large (i.e. > hw max) buffer sizes */
-static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-/* to do: support large (i.e. > hw max) buffer sizes */
-static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt,
-					int *slots_per_op)
-{
-	static const int slot_count_table[] = { 0,
-						1, 1, 1, 1, /* 01 - 04 */
-						2, 2, 2, 2, /* 05 - 08 */
-						4, 4, 4, 4, /* 09 - 12 */
-						4, 4, 4, 4, /* 13 - 16 */
-						8, 8, 8, 8, /* 17 - 20 */
-						8, 8, 8, 8, /* 21 - 24 */
-						8, 8, 8, 8, /* 25 - 28 */
-						8, 8, 8, 8, /* 29 - 32 */
-					      };
-	*slots_per_op = slot_count_table[src_cnt];
-	return *slots_per_op;
-}
-
-static inline int
-iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return iop_chan_memcpy_slot_count(0, slots_per_op);
-	case AAU_ID:
-		return iop3xx_aau_xor_slot_count(0, 2, slots_per_op);
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-static inline int iop_chan_xor_slot_count(size_t len, int src_cnt,
-						int *slots_per_op)
-{
-	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
-
-	if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT)
-		return slot_cnt;
-
-	len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
-	while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) {
-		len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
-		slot_cnt += *slots_per_op;
-	}
-
-	if (len)
-		slot_cnt += *slots_per_op;
-
-	return slot_cnt;
-}
-
-/* zero sum on iop3xx is limited to 1k at a time so it requires multiple
- * descriptors
- */
-static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
-						int *slots_per_op)
-{
-	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
-
-	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT)
-		return slot_cnt;
-
-	len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-	while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-		slot_cnt += *slots_per_op;
-	}
-
-	if (len)
-		slot_cnt += *slots_per_op;
-
-	return slot_cnt;
-}
-
-static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return hw_desc.dma->dest_addr;
-	case AAU_ID:
-		return hw_desc.aau->dest_addr;
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return hw_desc.dma->byte_count;
-	case AAU_ID:
-		return hw_desc.aau->byte_count;
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-/* translate the src_idx to a descriptor word index */
-static inline int __desc_idx(int src_idx)
-{
-	static const int desc_idx_table[] = { 0, 0, 0, 0,
-					      0, 1, 2, 3,
-					      5, 6, 7, 8,
-					      9, 10, 11, 12,
-					      14, 15, 16, 17,
-					      18, 19, 20, 21,
-					      23, 24, 25, 26,
-					      27, 28, 29, 30,
-					    };
-
-	return desc_idx_table[src_idx];
-}
-
-static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					int src_idx)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return hw_desc.dma->src_addr;
-	case AAU_ID:
-		break;
-	default:
-		BUG();
-	}
-
-	if (src_idx < 4)
-		return hw_desc.aau->src[src_idx];
-	else
-		return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr;
-}
-
-static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc,
-					int src_idx, dma_addr_t addr)
-{
-	if (src_idx < 4)
-		hw_desc->src[src_idx] = addr;
-	else
-		hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr;
-}
-
-static inline void
-iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop3xx_dma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.mem_to_mem_en = 1;
-	u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->upper_pci_src_addr = 0;
-	hw_desc->crc_addr = 0;
-}
-
-static inline void
-iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */
-	u_desc_ctrl.field.dest_write_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline u32
-iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt,
-		     unsigned long flags)
-{
-	int i, shift;
-	u32 edcr;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	switch (src_cnt) {
-	case 25 ... 32:
-		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		edcr = 0;
-		shift = 1;
-		for (i = 24; i < src_cnt; i++) {
-			edcr |= (1 << shift);
-			shift += 3;
-		}
-		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr;
-		src_cnt = 24;
-		/* fall through */
-	case 17 ... 24:
-		if (!u_desc_ctrl.field.blk_ctrl) {
-			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
-			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		}
-		edcr = 0;
-		shift = 1;
-		for (i = 16; i < src_cnt; i++) {
-			edcr |= (1 << shift);
-			shift += 3;
-		}
-		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr;
-		src_cnt = 16;
-		/* fall through */
-	case 9 ... 16:
-		if (!u_desc_ctrl.field.blk_ctrl)
-			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
-		edcr = 0;
-		shift = 1;
-		for (i = 8; i < src_cnt; i++) {
-			edcr |= (1 << shift);
-			shift += 3;
-		}
-		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr;
-		src_cnt = 8;
-		/* fall through */
-	case 2 ... 8:
-		shift = 1;
-		for (i = 0; i < src_cnt; i++) {
-			u_desc_ctrl.value |= (1 << shift);
-			shift += 3;
-		}
-
-		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
-			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
-	}
-
-	u_desc_ctrl.field.dest_write_en = 1;
-	u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-
-	return u_desc_ctrl.value;
-}
-
-static inline void
-iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
-		  unsigned long flags)
-{
-	iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags);
-}
-
-/* return the number of operations */
-static inline int
-iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
-		       unsigned long flags)
-{
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-	int i, j;
-
-	hw_desc = desc->hw_desc;
-
-	for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0;
-		i += slots_per_op, j++) {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags);
-		u_desc_ctrl.field.dest_write_en = 0;
-		u_desc_ctrl.field.zero_result_en = 1;
-		u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-		iter->desc_ctrl = u_desc_ctrl.value;
-
-		/* for the subsequent descriptors preserve the store queue
-		 * and chain them together
-		 */
-		if (i) {
-			prev_hw_desc =
-				iop_hw_desc_slot_idx(hw_desc, i - slots_per_op);
-			prev_hw_desc->next_desc =
-				(u32) (desc->async_tx.phys + (i << 5));
-		}
-	}
-
-	return j;
-}
-
-static inline void
-iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt,
-		       unsigned long flags)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	switch (src_cnt) {
-	case 25 ... 32:
-		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
-		/* fall through */
-	case 17 ... 24:
-		if (!u_desc_ctrl.field.blk_ctrl) {
-			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
-			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		}
-		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0;
-		/* fall through */
-	case 9 ... 16:
-		if (!u_desc_ctrl.field.blk_ctrl)
-			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
-		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0;
-		/* fall through */
-	case 1 ... 8:
-		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
-			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
-	}
-
-	u_desc_ctrl.field.dest_write_en = 0;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					u32 byte_count)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		hw_desc.dma->byte_count = byte_count;
-		break;
-	case AAU_ID:
-		hw_desc.aau->byte_count = byte_count;
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void
-iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
-			struct iop_adma_chan *chan)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		iop_desc_init_memcpy(desc, 1);
-		hw_desc.dma->byte_count = 0;
-		hw_desc.dma->dest_addr = 0;
-		hw_desc.dma->src_addr = 0;
-		break;
-	case AAU_ID:
-		iop_desc_init_null_xor(desc, 2, 1);
-		hw_desc.aau->byte_count = 0;
-		hw_desc.aau->dest_addr = 0;
-		hw_desc.aau->src[0] = 0;
-		hw_desc.aau->src[1] = 0;
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void
-iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
-	int slots_per_op = desc->slots_per_op;
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		hw_desc->byte_count = len;
-	} else {
-		do {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			i += slots_per_op;
-		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
-
-		if (len) {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = len;
-		}
-	}
-}
-
-static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					dma_addr_t addr)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		hw_desc.dma->dest_addr = addr;
-		break;
-	case AAU_ID:
-		hw_desc.aau->dest_addr = addr;
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
-					dma_addr_t addr)
-{
-	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
-	hw_desc->src_addr = addr;
-}
-
-static inline void
-iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
-				dma_addr_t addr)
-{
-
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	int i;
-
-	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
-		i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
-	}
-}
-
-static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
-					int src_idx, dma_addr_t addr)
-{
-
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	int i;
-
-	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
-		i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
-	}
-}
-
-static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
-					u32 next_desc_addr)
-{
-	/* hw_desc->next_desc is the same location for all channels */
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-	BUG_ON(hw_desc.dma->next_desc);
-	hw_desc.dma->next_desc = next_desc_addr;
-}
-
-static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
-{
-	/* hw_desc->next_desc is the same location for all channels */
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-	return hw_desc.dma->next_desc;
-}
-
-static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
-{
-	/* hw_desc->next_desc is the same location for all channels */
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-	hw_desc.dma->next_desc = 0;
-}
-
-static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
-						u32 val)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	hw_desc->src[0] = val;
-}
-
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
-
-	BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
-	return desc_ctrl.zero_result_err;
-}
-
-static inline void iop_chan_append(struct iop_adma_chan *chan)
-{
-	u32 dma_chan_ctrl;
-
-	dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
-	dma_chan_ctrl |= 0x2;
-	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
-}
-
-static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
-{
-	return __raw_readl(DMA_CSR(chan));
-}
-
-static inline void iop_chan_disable(struct iop_adma_chan *chan)
-{
-	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
-	dma_chan_ctrl &= ~1;
-	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
-}
-
-static inline void iop_chan_enable(struct iop_adma_chan *chan)
-{
-	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
-
-	dma_chan_ctrl |= 1;
-	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
-}
-
-static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-	status &= (1 << 9);
-	__raw_writel(status, DMA_CSR(chan));
-}
-
-static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-	status &= (1 << 8);
-	__raw_writel(status, DMA_CSR(chan));
-}
-
-static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1);
-		break;
-	case AAU_ID:
-		status &= (1 << 5);
-		break;
-	default:
-		BUG();
-	}
-
-	__raw_writel(status, DMA_CSR(chan));
-}
-
-static inline int
-iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(5, &status);
-}
-
-static inline int
-iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return test_bit(2, &status);
-	default:
-		return 0;
-	}
-}
-
-static inline int
-iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return test_bit(3, &status);
-	default:
-		return 0;
-	}
-}
-
-static inline int
-iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return test_bit(1, &status);
-	default:
-		return 0;
-	}
-}
-#endif /* _ADMA_H */
diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/include/asm-arm/hardware/iop3xx-gpio.h
deleted file mode 100644
index 0c9331f9ac24..000000000000
--- a/include/asm-arm/hardware/iop3xx-gpio.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/iop3xx-gpio.h
- *
- * IOP3xx GPIO wrappers
- *
- * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
- * Based on IXP4XX gpio.h file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-
-#include <asm/hardware.h>
-#include <asm-generic/gpio.h>
-
-#define IOP3XX_N_GPIOS	8
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (gpio > IOP3XX_N_GPIOS)
-		return __gpio_get_value(gpio);
-
-	return gpio_line_get(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (gpio > IOP3XX_N_GPIOS) {
-		__gpio_set_value(gpio, value);
-		return;
-	}
-	gpio_line_set(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (gpio < IOP3XX_N_GPIOS)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-/*
- * The GPIOs are not generating any interrupt
- * Note : manuals are not clear about this
- */
-static inline int gpio_to_irq(int gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
-	return -EINVAL;
-}
-
-#endif
-
diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h
deleted file mode 100644
index 18f6937f5010..000000000000
--- a/include/asm-arm/hardware/iop3xx.h
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * include/asm-arm/hardware/iop3xx.h
- *
- * Intel IOP32X and IOP33X register definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP3XX_H
-#define __IOP3XX_H
-
-/*
- * IOP3XX GPIO handling
- */
-#define GPIO_IN			0
-#define GPIO_OUT		1
-#define GPIO_LOW		0
-#define GPIO_HIGH		1
-#define IOP3XX_GPIO_LINE(x)	(x)
-
-#ifndef __ASSEMBLY__
-extern void gpio_line_config(int line, int direction);
-extern int  gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
-extern int init_atu;
-extern int iop3xx_get_init_atu(void);
-#endif
-
-
-/*
- * IOP3XX processor registers
- */
-#define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfeffe000
-#define IOP3XX_PERIPHERAL_SIZE		0x00002000
-#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
-					(IOP3XX_PERIPHERAL_PHYS_BASE\
-					- IOP3XX_PERIPHERAL_VIRT_BASE))
-#define IOP3XX_REG_ADDR(reg)		(IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
-
-/* Address Translation Unit  */
-#define IOP3XX_ATUVID		(volatile u16 *)IOP3XX_REG_ADDR(0x0100)
-#define IOP3XX_ATUDID		(volatile u16 *)IOP3XX_REG_ADDR(0x0102)
-#define IOP3XX_ATUCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x0104)
-#define IOP3XX_ATUSR		(volatile u16 *)IOP3XX_REG_ADDR(0x0106)
-#define IOP3XX_ATURID		(volatile u8  *)IOP3XX_REG_ADDR(0x0108)
-#define IOP3XX_ATUCCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0109)
-#define IOP3XX_ATUCLSR		(volatile u8  *)IOP3XX_REG_ADDR(0x010c)
-#define IOP3XX_ATULT		(volatile u8  *)IOP3XX_REG_ADDR(0x010d)
-#define IOP3XX_ATUHTR		(volatile u8  *)IOP3XX_REG_ADDR(0x010e)
-#define IOP3XX_ATUBIST		(volatile u8  *)IOP3XX_REG_ADDR(0x010f)
-#define IOP3XX_IABAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0110)
-#define IOP3XX_IAUBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0114)
-#define IOP3XX_IABAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0118)
-#define IOP3XX_IAUBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x011c)
-#define IOP3XX_IABAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0120)
-#define IOP3XX_IAUBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0124)
-#define IOP3XX_ASVIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012c)
-#define IOP3XX_ASIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012e)
-#define IOP3XX_ERBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0130)
-#define IOP3XX_ATUILR		(volatile u8  *)IOP3XX_REG_ADDR(0x013c)
-#define IOP3XX_ATUIPR		(volatile u8  *)IOP3XX_REG_ADDR(0x013d)
-#define IOP3XX_ATUMGNT		(volatile u8  *)IOP3XX_REG_ADDR(0x013e)
-#define IOP3XX_ATUMLAT		(volatile u8  *)IOP3XX_REG_ADDR(0x013f)
-#define IOP3XX_IALR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0140)
-#define IOP3XX_IATVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0144)
-#define IOP3XX_ERLR		(volatile u32 *)IOP3XX_REG_ADDR(0x0148)
-#define IOP3XX_ERTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x014c)
-#define IOP3XX_IALR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0150)
-#define IOP3XX_IALR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0154)
-#define IOP3XX_IATVR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0158)
-#define IOP3XX_OIOWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x015c)
-#define IOP3XX_OMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0160)
-#define IOP3XX_OUMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0164)
-#define IOP3XX_OMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0168)
-#define IOP3XX_OUMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x016c)
-#define IOP3XX_OUDWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x0178)
-#define IOP3XX_ATUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0180)
-#define IOP3XX_PCSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0184)
-#define IOP3XX_ATUISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0188)
-#define IOP3XX_ATUIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x018c)
-#define IOP3XX_IABAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0190)
-#define IOP3XX_IAUBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0194)
-#define IOP3XX_IALR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0198)
-#define IOP3XX_IATVR3		(volatile u32 *)IOP3XX_REG_ADDR(0x019c)
-#define IOP3XX_OCCAR		(volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
-#define IOP3XX_OCCDR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
-#define IOP3XX_PDSCR		(volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
-#define IOP3XX_PMCAPID		(volatile u8  *)IOP3XX_REG_ADDR(0x01c0)
-#define IOP3XX_PMNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01c1)
-#define IOP3XX_APMCR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
-#define IOP3XX_APMCSR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
-#define IOP3XX_PCIXCAPID	(volatile u8  *)IOP3XX_REG_ADDR(0x01e0)
-#define IOP3XX_PCIXNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01e1)
-#define IOP3XX_PCIXCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
-#define IOP3XX_PCIXSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
-#define IOP3XX_PCIIRSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
-#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP3XX_PCSR_IN_Q_BUSY	(1 << 14)
-#define IOP3XX_ATUCR_OUT_EN	(1 << 1)
-
-#define IOP3XX_INIT_ATU_DEFAULT 0
-#define IOP3XX_INIT_ATU_DISABLE -1
-#define IOP3XX_INIT_ATU_ENABLE	 1
-
-/* Messaging Unit  */
-#define IOP3XX_IMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0310)
-#define IOP3XX_IMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0314)
-#define IOP3XX_OMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0318)
-#define IOP3XX_OMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x031c)
-#define IOP3XX_IDR		(volatile u32 *)IOP3XX_REG_ADDR(0x0320)
-#define IOP3XX_IISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0324)
-#define IOP3XX_IIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0328)
-#define IOP3XX_ODR		(volatile u32 *)IOP3XX_REG_ADDR(0x032c)
-#define IOP3XX_OISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0330)
-#define IOP3XX_OIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0334)
-#define IOP3XX_MUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0350)
-#define IOP3XX_QBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0354)
-#define IOP3XX_IFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0360)
-#define IOP3XX_IFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0364)
-#define IOP3XX_IPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0368)
-#define IOP3XX_IPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x036c)
-#define IOP3XX_OFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0370)
-#define IOP3XX_OFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0374)
-#define IOP3XX_OPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0378)
-#define IOP3XX_OPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x037c)
-#define IOP3XX_IAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0380)
-
-/* DMA Controller  */
-#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
-					(0x400 + (chan << 6)))
-#define IOP3XX_DMA_UPPER_PA(chan)  (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
-
-/* Peripheral bus interface  */
-#define IOP3XX_PBCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0680)
-#define IOP3XX_PBISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0684)
-#define IOP3XX_PBBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0688)
-#define IOP3XX_PBLR0		(volatile u32 *)IOP3XX_REG_ADDR(0x068c)
-#define IOP3XX_PBBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0690)
-#define IOP3XX_PBLR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0694)
-#define IOP3XX_PBBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0698)
-#define IOP3XX_PBLR2		(volatile u32 *)IOP3XX_REG_ADDR(0x069c)
-#define IOP3XX_PBBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
-#define IOP3XX_PBLR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
-#define IOP3XX_PBBAR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
-#define IOP3XX_PBLR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
-#define IOP3XX_PBBAR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
-#define IOP3XX_PBLR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
-#define IOP3XX_PMBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
-#define IOP3XX_PMBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
-#define IOP3XX_PMBR2		(volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
-
-/* Peripheral performance monitoring unit  */
-#define IOP3XX_GTMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0700)
-#define IOP3XX_ESR		(volatile u32 *)IOP3XX_REG_ADDR(0x0704)
-#define IOP3XX_EMISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0708)
-#define IOP3XX_GTSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* PERCR0 DOESN'T EXIST - index from 1! */
-#define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-
-/* General Purpose I/O  */
-#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
-#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-
-/* Timers  */
-#define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
-#define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
-#define IOP3XX_TU_TCR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0008)
-#define IOP3XX_TU_TCR1		(volatile u32 *)IOP3XX_TIMER_REG(0x000c)
-#define IOP3XX_TU_TRR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0010)
-#define IOP3XX_TU_TRR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0014)
-#define IOP3XX_TU_TISR		(volatile u32 *)IOP3XX_TIMER_REG(0x0018)
-#define IOP3XX_TU_WDTCR		(volatile u32 *)IOP3XX_TIMER_REG(0x001c)
-#define IOP_TMR_EN	    0x02
-#define IOP_TMR_RELOAD	    0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1  0x00
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM        0x1e1e1e1e
-#define IOP_WDTCR_EN            0xe1e1e1e1
-/* iop3xx does not support stopping the watchdog, so we just re-arm */
-#define IOP_WDTCR_DIS_ARM	(IOP_WDTCR_EN_ARM)
-#define IOP_WDTCR_DIS		(IOP_WDTCR_EN)
-
-/* Application accelerator unit  */
-#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
-#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
-
-/* I2C bus interface unit  */
-#define IOP3XX_ICR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1680)
-#define IOP3XX_ISR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1684)
-#define IOP3XX_ISAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1688)
-#define IOP3XX_IDBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x168c)
-#define IOP3XX_IBMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1694)
-#define IOP3XX_ICR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
-#define IOP3XX_ISR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
-#define IOP3XX_ISAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
-#define IOP3XX_IDBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
-#define IOP3XX_IBMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
-
-
-/*
- * IOP3XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
-
-#define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
-#define IOP3XX_PCI_LOWER_IO_PA		0x90000000
-#define IOP3XX_PCI_LOWER_IO_VA		0xfe000000
-#define IOP3XX_PCI_LOWER_IO_BA		0x90000000
-#define IOP3XX_PCI_UPPER_IO_PA		(IOP3XX_PCI_LOWER_IO_PA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_UPPER_IO_VA		(IOP3XX_PCI_LOWER_IO_VA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
-					IOP3XX_PCI_LOWER_IO_PA) +\
-					IOP3XX_PCI_LOWER_IO_VA)
-
-
-#ifndef __ASSEMBLY__
-void iop3xx_map_io(void);
-void iop_init_cp6_handler(void);
-void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
-
-static inline void write_tmr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_trr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_wdtcr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtcr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
-}
-
-extern unsigned long get_iop_tick_rate(void);
-
-/* only iop13xx has these registers, we define these to present a
- * common register interface for the iop_wdt driver.
- */
-#define IOP_RCSR_WDT	(0)
-static inline u32 read_rcsr(void)
-{
-	return 0;
-}
-static inline void write_wdtsr(u32 val)
-{
-	do { } while (0);
-}
-
-extern struct platform_device iop3xx_dma_0_channel;
-extern struct platform_device iop3xx_dma_1_channel;
-extern struct platform_device iop3xx_aau_channel;
-extern struct platform_device iop3xx_i2c0_device;
-extern struct platform_device iop3xx_i2c1_device;
-
-#endif
-
-
-#endif
diff --git a/include/asm-arm/hardware/iop_adma.h b/include/asm-arm/hardware/iop_adma.h
deleted file mode 100644
index cb7e3611bcba..000000000000
--- a/include/asm-arm/hardware/iop_adma.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright © 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef IOP_ADMA_H
-#define IOP_ADMA_H
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-
-#define IOP_ADMA_SLOT_SIZE 32
-#define IOP_ADMA_THRESHOLD 4
-
-/**
- * struct iop_adma_device - internal representation of an ADMA device
- * @pdev: Platform device
- * @id: HW ADMA Device selector
- * @dma_desc_pool: base of DMA descriptor region (DMA address)
- * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
- * @common: embedded struct dma_device
- */
-struct iop_adma_device {
-	struct platform_device *pdev;
-	int id;
-	dma_addr_t dma_desc_pool;
-	void *dma_desc_pool_virt;
-	struct dma_device common;
-};
-
-/**
- * struct iop_adma_chan - internal representation of an ADMA device
- * @pending: allows batching of hardware operations
- * @completed_cookie: identifier for the most recently completed operation
- * @lock: serializes enqueue/dequeue operations to the slot pool
- * @mmr_base: memory mapped register base
- * @chain: device chain view of the descriptors
- * @device: parent device
- * @common: common dmaengine channel object members
- * @last_used: place holder for allocation to continue from where it left off
- * @all_slots: complete domain of slots usable by the channel
- * @slots_allocated: records the actual size of the descriptor slot pool
- * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs
- */
-struct iop_adma_chan {
-	int pending;
-	dma_cookie_t completed_cookie;
-	spinlock_t lock; /* protects the descriptor slot pool */
-	void __iomem *mmr_base;
-	struct list_head chain;
-	struct iop_adma_device *device;
-	struct dma_chan common;
-	struct iop_adma_desc_slot *last_used;
-	struct list_head all_slots;
-	int slots_allocated;
-	struct tasklet_struct irq_tasklet;
-};
-
-/**
- * struct iop_adma_desc_slot - IOP-ADMA software descriptor
- * @slot_node: node on the iop_adma_chan.all_slots list
- * @chain_node: node on the op_adma_chan.chain list
- * @hw_desc: virtual address of the hardware descriptor chain
- * @phys: hardware address of the hardware descriptor chain
- * @group_head: first operation in a transaction
- * @slot_cnt: total slots used in an transaction (group of operations)
- * @slots_per_op: number of slots per operation
- * @idx: pool index
- * @unmap_src_cnt: number of xor sources
- * @unmap_len: transaction bytecount
- * @async_tx: support for the async_tx api
- * @group_list: list of slots that make up a multi-descriptor transaction
- *	for example transfer lengths larger than the supported hw max
- * @xor_check_result: result of zero sum
- * @crc32_result: result crc calculation
- */
-struct iop_adma_desc_slot {
-	struct list_head slot_node;
-	struct list_head chain_node;
-	void *hw_desc;
-	struct iop_adma_desc_slot *group_head;
-	u16 slot_cnt;
-	u16 slots_per_op;
-	u16 idx;
-	u16 unmap_src_cnt;
-	size_t unmap_len;
-	struct dma_async_tx_descriptor async_tx;
-	union {
-		u32 *xor_check_result;
-		u32 *crc32_result;
-	};
-};
-
-struct iop_adma_platform_data {
-	int hw_id;
-	dma_cap_mask_t cap_mask;
-	size_t pool_size;
-};
-
-#define to_iop_sw_desc(addr_hw_desc) \
-	container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc)
-#define iop_hw_desc_slot_idx(hw_desc, idx) \
-	( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) )
-#endif
diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h
deleted file mode 100644
index 74b5fff7f575..000000000000
--- a/include/asm-arm/hardware/it8152.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/include/arm/hardware/it8152.h
- *
- * Copyright Compulab Ltd., 2006,2007
- * Mike Rapoport <mike@compulab.co.il>
- *
- * ITE 8152 companion chip register definitions
- */
-
-#ifndef __ASM_HARDWARE_IT8152_H
-#define __ASM_HARDWARE_IT8152_H
-extern unsigned long it8152_base_address;
-
-#define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)
-#define IT8152_CFGREG_BASE		(it8152_base_address + 0x03f00000)
-
-#define __REG_IT8152(x)			(it8152_base_address + (x))
-
-#define IT8152_PCI_CFG_ADDR		__REG_IT8152(0x3f00800)
-#define IT8152_PCI_CFG_DATA		__REG_IT8152(0x3f00804)
-
-#define IT8152_INTC_LDCNIRR		__REG_IT8152(0x3f00300)
-#define IT8152_INTC_LDPNIRR		__REG_IT8152(0x3f00304)
-#define IT8152_INTC_LDCNIMR		__REG_IT8152(0x3f00308)
-#define IT8152_INTC_LDPNIMR		__REG_IT8152(0x3f0030C)
-#define IT8152_INTC_LDNITR		__REG_IT8152(0x3f00310)
-#define IT8152_INTC_LDNIAR		__REG_IT8152(0x3f00314)
-#define IT8152_INTC_LPCNIRR		__REG_IT8152(0x3f00320)
-#define IT8152_INTC_LPPNIRR		__REG_IT8152(0x3f00324)
-#define IT8152_INTC_LPCNIMR		__REG_IT8152(0x3f00328)
-#define IT8152_INTC_LPPNIMR		__REG_IT8152(0x3f0032C)
-#define IT8152_INTC_LPNITR		__REG_IT8152(0x3f00330)
-#define IT8152_INTC_LPNIAR		__REG_IT8152(0x3f00334)
-#define IT8152_INTC_PDCNIRR		__REG_IT8152(0x3f00340)
-#define IT8152_INTC_PDPNIRR		__REG_IT8152(0x3f00344)
-#define IT8152_INTC_PDCNIMR		__REG_IT8152(0x3f00348)
-#define IT8152_INTC_PDPNIMR		__REG_IT8152(0x3f0034C)
-#define IT8152_INTC_PDNITR		__REG_IT8152(0x3f00350)
-#define IT8152_INTC_PDNIAR		__REG_IT8152(0x3f00354)
-#define IT8152_INTC_INTC_TYPER		__REG_IT8152(0x3f003FC)
-
-#define IT8152_GPIO_GPDR		__REG_IT8152(0x3f00500)
-
-/*
-  Interrupt controller per register summary:
-  ---------------------------------------
-  LCDNIRR:
-  IT8152_LD_IRQ(8) PCICLK stop
-  IT8152_LD_IRQ(7) MCLK ready
-  IT8152_LD_IRQ(6) s/w
-  IT8152_LD_IRQ(5) UART
-  IT8152_LD_IRQ(4) GPIO
-  IT8152_LD_IRQ(3) TIMER 4
-  IT8152_LD_IRQ(2) TIMER 3
-  IT8152_LD_IRQ(1) TIMER 2
-  IT8152_LD_IRQ(0) TIMER 1
-
-  LPCNIRR:
-  IT8152_LP_IRQ(x) serial IRQ x
-
-  PCIDNIRR:
-  IT8152_PD_IRQ(14) PCISERR
-  IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
-  IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
-  IT8152_PD_IRQ(11) PCI INTD
-  IT8152_PD_IRQ(10) PCI INTC
-  IT8152_PD_IRQ(9)  PCI INTB
-  IT8152_PD_IRQ(8)  PCI INTA
-  IT8152_PD_IRQ(7)  serial INTD
-  IT8152_PD_IRQ(6)  serial INTC
-  IT8152_PD_IRQ(5)  serial INTB
-  IT8152_PD_IRQ(4)  serial INTA
-  IT8152_PD_IRQ(3)  serial IRQ IOCHK (IOCHKR)
-  IT8152_PD_IRQ(2)  chaining DMA (CDMAR)
-  IT8152_PD_IRQ(1)  USB (USBR)
-  IT8152_PD_IRQ(0)  Audio controller (ACR)
- */
-/* frequently used interrupts */
-#define IT8152_PCISERR		IT8152_PD_IRQ(14)
-#define IT8152_H2PTADR		IT8152_PD_IRQ(13)
-#define IT8152_H2PMAR		IT8152_PD_IRQ(12)
-#define IT8152_PCI_INTD		IT8152_PD_IRQ(11)
-#define IT8152_PCI_INTC		IT8152_PD_IRQ(10)
-#define IT8152_PCI_INTB		IT8152_PD_IRQ(9)
-#define IT8152_PCI_INTA		IT8152_PD_IRQ(8)
-#define IT8152_CDMA_INT		IT8152_PD_IRQ(2)
-#define IT8152_USB_INT		IT8152_PD_IRQ(1)
-#define IT8152_AUDIO_INT	IT8152_PD_IRQ(0)
-
-struct pci_dev;
-struct pci_sys_data;
-
-extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
-extern void it8152_init_irq(void);
-extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
-extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
-
-#endif /* __ASM_HARDWARE_IT8152_H */
diff --git a/include/asm-arm/hardware/linkup-l1110.h b/include/asm-arm/hardware/linkup-l1110.h
deleted file mode 100644
index 7ec91168a576..000000000000
--- a/include/asm-arm/hardware/linkup-l1110.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2	(1 << 1)
-#define LINKUP_PRS_S3	(1 << 2)
-#define LINKUP_PRS_S4	(1 << 3)
-#define LINKUP_PRS_BVD1	(1 << 4)
-#define LINKUP_PRS_BVD2	(1 << 5)
-#define LINKUP_PRS_VS1	(1 << 6)
-#define LINKUP_PRS_VS2	(1 << 7)
-#define LINKUP_PRS_RDY	(1 << 8)
-#define LINKUP_PRS_CD1	(1 << 9)
-#define LINKUP_PRS_CD2	(1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1	(1 << 0)
-#define LINKUP_PRC_S2	(1 << 1)
-#define LINKUP_PRC_S3	(1 << 2)
-#define LINKUP_PRC_S4	(1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
-
-struct linkup_l1110 {
-	volatile short prc;
-};
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
deleted file mode 100644
index fb0645de6f31..000000000000
--- a/include/asm-arm/hardware/locomo.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/locomo.h
- *
- * This file contains the definitions for the LoCoMo G/A Chip
- *
- * (C) Copyright 2004 John Lenz
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on sa1111.h
- */
-#ifndef _ASM_ARCH_LOCOMO
-#define _ASM_ARCH_LOCOMO
-
-#define locomo_writel(val,addr)	({ *(volatile u16 *)(addr) = (val); })
-#define locomo_readl(addr)	(*(volatile u16 *)(addr))
-
-/* LOCOMO version */
-#define LOCOMO_VER	0x00
-
-/* Pin status */
-#define LOCOMO_ST	0x04
-
-/* Pin status */
-#define LOCOMO_C32K	0x08
-
-/* Interrupt controller */
-#define LOCOMO_ICR	0x0C
-
-/* MCS decoder for boot selecting */
-#define LOCOMO_MCSX0	0x10
-#define LOCOMO_MCSX1	0x14
-#define LOCOMO_MCSX2	0x18
-#define LOCOMO_MCSX3	0x1c
-
-/* Touch panel controller */
-#define LOCOMO_ASD	0x20		/* AD start delay */
-#define LOCOMO_HSD	0x28		/* HSYS delay */
-#define LOCOMO_HSC	0x2c		/* HSYS period */
-#define LOCOMO_TADC	0x30		/* tablet ADC clock */
-
-
-/* Long time timer */
-#define LOCOMO_LTC	0xd8		/* LTC interrupt setting */
-#define LOCOMO_LTINT	0xdc		/* LTC interrupt */
-
-/* DAC control signal for LCD (COMADJ ) */
-#define LOCOMO_DAC		0xe0
-/* DAC control */
-#define	LOCOMO_DAC_SCLOEB	0x08	/* SCL pin output data       */
-#define	LOCOMO_DAC_TEST		0x04	/* Test bit                  */
-#define	LOCOMO_DAC_SDA		0x02	/* SDA pin level (read-only) */
-#define	LOCOMO_DAC_SDAOEB	0x01	/* SDA pin output data       */
-
-/* SPI interface */
-#define LOCOMO_SPI	0x60
-#define LOCOMO_SPIMD	0x00		/* SPI mode setting */
-#define LOCOMO_SPICT	0x04		/* SPI mode control */
-#define LOCOMO_SPIST	0x08		/* SPI status */
-#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
-#define	LOCOMO_SPI_REND	(1 << 2)	/* Receive end bit */
-#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
-#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
-
-#define LOCOMO_SPIIS	0x10		/* SPI interrupt status */
-#define LOCOMO_SPIWE	0x14		/* SPI interrupt status write enable */
-#define LOCOMO_SPIIE	0x18		/* SPI interrupt enable */
-#define LOCOMO_SPIIR	0x1c		/* SPI interrupt request */
-#define LOCOMO_SPITD	0x20		/* SPI transfer data write */
-#define LOCOMO_SPIRD	0x24		/* SPI receive data read */
-#define LOCOMO_SPITS	0x28		/* SPI transfer data shift */
-#define LOCOMO_SPIRS	0x2C		/* SPI receive data shift */
-
-/* GPIO */
-#define LOCOMO_GPD		0x90	/* GPIO direction */
-#define LOCOMO_GPE		0x94	/* GPIO input enable */
-#define LOCOMO_GPL		0x98	/* GPIO level */
-#define LOCOMO_GPO		0x9c	/* GPIO out data setting */
-#define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
-#define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
-#define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
-#define LOCOMO_GWE		0xac	/* GPIO status write enable */
-#define LOCOMO_GIE		0xb0	/* GPIO interrupt enable */
-#define LOCOMO_GIR		0xb4	/* GPIO interrupt request */
-#define	LOCOMO_GPIO(Nb)		(0x01 << (Nb))
-#define LOCOMO_GPIO_RTS		LOCOMO_GPIO(0)
-#define LOCOMO_GPIO_CTS		LOCOMO_GPIO(1)
-#define LOCOMO_GPIO_DSR		LOCOMO_GPIO(2)
-#define LOCOMO_GPIO_DTR		LOCOMO_GPIO(3)
-#define LOCOMO_GPIO_LCD_VSHA_ON	LOCOMO_GPIO(4)
-#define LOCOMO_GPIO_LCD_VSHD_ON	LOCOMO_GPIO(5)
-#define LOCOMO_GPIO_LCD_VEE_ON	LOCOMO_GPIO(6)
-#define LOCOMO_GPIO_LCD_MOD	LOCOMO_GPIO(7)
-#define LOCOMO_GPIO_DAC_ON	LOCOMO_GPIO(8)
-#define LOCOMO_GPIO_FL_VR	LOCOMO_GPIO(9)
-#define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
-#define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
-#define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)
-#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
-#define LOCOMO_GPIO_WRITE_PROT  LOCOMO_GPIO(14)
-#define LOCOMO_GPIO_CARD_POWER  LOCOMO_GPIO(15)
-
-/* Start the definitions of the devices.  Each device has an initial
- * base address and a series of offsets from that base address. */
-
-/* Keyboard controller */
-#define LOCOMO_KEYBOARD		0x40
-#define LOCOMO_KIB		0x00	/* KIB level */
-#define LOCOMO_KSC		0x04	/* KSTRB control */
-#define LOCOMO_KCMD		0x08	/* KSTRB command */
-#define LOCOMO_KIC		0x0c	/* Key interrupt */
-
-/* Front light adjustment controller */
-#define LOCOMO_FRONTLIGHT	0xc8
-#define LOCOMO_ALS		0x00	/* Adjust light cycle */
-#define LOCOMO_ALD		0x04	/* Adjust light duty */
-
-#define LOCOMO_ALC_EN		0x8000
-
-/* Backlight controller: TFT signal */
-#define LOCOMO_BACKLIGHT	0x38
-#define LOCOMO_TC		0x00		/* TFT control signal */
-#define LOCOMO_CPSD		0x04		/* CPS delay */
-
-/* Audio controller */
-#define LOCOMO_AUDIO		0x54
-#define LOCOMO_ACC		0x00	/* Audio clock */
-#define LOCOMO_PAIF		0xD0	/* PCM audio interface */
-/* Audio clock */
-#define	LOCOMO_ACC_XON		0x80
-#define	LOCOMO_ACC_XEN		0x40
-#define	LOCOMO_ACC_XSEL0	0x00
-#define	LOCOMO_ACC_XSEL1	0x20
-#define	LOCOMO_ACC_MCLKEN	0x10
-#define	LOCOMO_ACC_64FSEN	0x08
-#define	LOCOMO_ACC_CLKSEL000	0x00	/* mclk  2 */
-#define	LOCOMO_ACC_CLKSEL001	0x01	/* mclk  3 */
-#define	LOCOMO_ACC_CLKSEL010	0x02	/* mclk  4 */
-#define	LOCOMO_ACC_CLKSEL011	0x03	/* mclk  6 */
-#define	LOCOMO_ACC_CLKSEL100	0x04	/* mclk  8 */
-#define	LOCOMO_ACC_CLKSEL101	0x05	/* mclk 12 */
-/* PCM audio interface */
-#define	LOCOMO_PAIF_SCINV	0x20
-#define	LOCOMO_PAIF_SCEN	0x10
-#define	LOCOMO_PAIF_LRCRST	0x08
-#define	LOCOMO_PAIF_LRCEVE	0x04
-#define	LOCOMO_PAIF_LRCINV	0x02
-#define	LOCOMO_PAIF_LRCEN	0x01
-
-/* LED controller */
-#define LOCOMO_LED		0xe8
-#define LOCOMO_LPT0		0x00
-#define LOCOMO_LPT1		0x04
-/* LED control */
-#define LOCOMO_LPT_TOFH		0x80
-#define LOCOMO_LPT_TOFL		0x08
-#define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
-#define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
-
-extern struct bus_type locomo_bus_type;
-
-#define LOCOMO_DEVID_KEYBOARD	0
-#define LOCOMO_DEVID_FRONTLIGHT	1
-#define LOCOMO_DEVID_BACKLIGHT	2
-#define LOCOMO_DEVID_AUDIO	3
-#define LOCOMO_DEVID_LED	4
-#define LOCOMO_DEVID_UART	5
-#define LOCOMO_DEVID_SPI	6
-
-struct locomo_dev {
-	struct device	dev;
-	unsigned int	devid;
-	unsigned int	irq[1];
-
-	void		*mapbase;
-	unsigned long	length;
-
-	u64		dma_mask;
-};
-
-#define LOCOMO_DEV(_d)	container_of((_d), struct locomo_dev, dev)
-
-#define locomo_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
-#define locomo_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
-
-struct locomo_driver {
-	struct device_driver	drv;
-	unsigned int		devid;
-	int (*probe)(struct locomo_dev *);
-	int (*remove)(struct locomo_dev *);
-	int (*suspend)(struct locomo_dev *, pm_message_t);
-	int (*resume)(struct locomo_dev *);
-};
-
-#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)
-
-#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
-
-void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
-
-int locomo_driver_register(struct locomo_driver *);
-void locomo_driver_unregister(struct locomo_driver *);
-
-/* GPIO control functions */
-void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
-int locomo_gpio_read_level(struct device *dev, unsigned int bits);
-int locomo_gpio_read_output(struct device *dev, unsigned int bits);
-void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
-
-/* M62332 control function */
-void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
-
-/* Frontlight control */
-void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
-
-#endif
diff --git a/include/asm-arm/hardware/memc.h b/include/asm-arm/hardware/memc.h
deleted file mode 100644
index 8aef5aa0e01b..000000000000
--- a/include/asm-arm/hardware/memc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/memc.h
- *
- *  Copyright (C) Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VDMA_ALIGNMENT	PAGE_SIZE
-#define VDMA_XFERSIZE	16
-#define VDMA_INIT	0
-#define VDMA_START	1
-#define VDMA_END	2
-
-#ifndef __ASSEMBLY__
-extern void memc_write(unsigned int reg, unsigned long val);
-
-#define video_set_dma(start,end,offset)				\
-do {								\
-	memc_write (VDMA_START, (start >> 2));			\
-	memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);	\
-	memc_write (VDMA_INIT, (offset >> 2));			\
-} while (0)
-
-#endif
diff --git a/include/asm-arm/hardware/pci_v3.h b/include/asm-arm/hardware/pci_v3.h
deleted file mode 100644
index 4d497bdb9a97..000000000000
--- a/include/asm-arm/hardware/pci_v3.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/pci_v3.h
- *
- *  Internal header file PCI V3 chip
- *
- *  Copyright (C) ARM Limited
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef ASM_ARM_HARDWARE_PCI_V3_H
-#define ASM_ARM_HARDWARE_PCI_V3_H
-
-/* -------------------------------------------------------------------------------
- *  V3 Local Bus to PCI Bridge definitions
- * -------------------------------------------------------------------------------
- *  Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
- *  All V3 register names are prefaced by V3_ to avoid clashing with any other
- *  PCI definitions.  Their names match the user's manual.
- * 
- *  I'm assuming that I20 is disabled.
- * 
- */
-#define V3_PCI_VENDOR                   0x00000000
-#define V3_PCI_DEVICE                   0x00000002
-#define V3_PCI_CMD                      0x00000004
-#define V3_PCI_STAT                     0x00000006
-#define V3_PCI_CC_REV                   0x00000008
-#define V3_PCI_HDR_CFG                  0x0000000C
-#define V3_PCI_IO_BASE                  0x00000010
-#define V3_PCI_BASE0                    0x00000014
-#define V3_PCI_BASE1                    0x00000018
-#define V3_PCI_SUB_VENDOR               0x0000002C
-#define V3_PCI_SUB_ID                   0x0000002E
-#define V3_PCI_ROM                      0x00000030
-#define V3_PCI_BPARAM                   0x0000003C
-#define V3_PCI_MAP0                     0x00000040
-#define V3_PCI_MAP1                     0x00000044
-#define V3_PCI_INT_STAT                 0x00000048
-#define V3_PCI_INT_CFG                  0x0000004C 
-#define V3_LB_BASE0                     0x00000054
-#define V3_LB_BASE1                     0x00000058
-#define V3_LB_MAP0                      0x0000005E
-#define V3_LB_MAP1                      0x00000062
-#define V3_LB_BASE2                     0x00000064
-#define V3_LB_MAP2                      0x00000066
-#define V3_LB_SIZE                      0x00000068
-#define V3_LB_IO_BASE                   0x0000006E
-#define V3_FIFO_CFG                     0x00000070
-#define V3_FIFO_PRIORITY                0x00000072
-#define V3_FIFO_STAT                    0x00000074
-#define V3_LB_ISTAT                     0x00000076
-#define V3_LB_IMASK                     0x00000077
-#define V3_SYSTEM                       0x00000078
-#define V3_LB_CFG                       0x0000007A
-#define V3_PCI_CFG                      0x0000007C
-#define V3_DMA_PCI_ADR0                 0x00000080
-#define V3_DMA_PCI_ADR1                 0x00000090
-#define V3_DMA_LOCAL_ADR0               0x00000084
-#define V3_DMA_LOCAL_ADR1               0x00000094
-#define V3_DMA_LENGTH0                  0x00000088
-#define V3_DMA_LENGTH1                  0x00000098
-#define V3_DMA_CSR0                     0x0000008B
-#define V3_DMA_CSR1                     0x0000009B
-#define V3_DMA_CTLB_ADR0                0x0000008C
-#define V3_DMA_CTLB_ADR1                0x0000009C
-#define V3_DMA_DELAY                    0x000000E0
-#define V3_MAIL_DATA                    0x000000C0
-#define V3_PCI_MAIL_IEWR                0x000000D0
-#define V3_PCI_MAIL_IERD                0x000000D2
-#define V3_LB_MAIL_IEWR                 0x000000D4
-#define V3_LB_MAIL_IERD                 0x000000D6
-#define V3_MAIL_WR_STAT                 0x000000D8
-#define V3_MAIL_RD_STAT                 0x000000DA
-#define V3_QBA_MAP                      0x000000DC
-
-/*  PCI COMMAND REGISTER bits
- */
-#define V3_COMMAND_M_FBB_EN             (1 << 9)
-#define V3_COMMAND_M_SERR_EN            (1 << 8)
-#define V3_COMMAND_M_PAR_EN             (1 << 6)
-#define V3_COMMAND_M_MASTER_EN          (1 << 2)
-#define V3_COMMAND_M_MEM_EN             (1 << 1)
-#define V3_COMMAND_M_IO_EN              (1 << 0)
-
-/*  SYSTEM REGISTER bits
- */
-#define V3_SYSTEM_M_RST_OUT             (1 << 15)
-#define V3_SYSTEM_M_LOCK                (1 << 14)
-
-/*  PCI_CFG bits
- */
-#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
-#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
-#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
-#define V3_PCI_CFG_M_EN3V		(1 << 12)
-#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
-
-/*  PCI_BASE register bits (PCI -> Local Bus)
- */
-#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
-#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
-#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
-#define V3_PCI_BASE_M_TYPE              (3 << 1)
-#define V3_PCI_BASE_M_IO                (1 << 0)
-
-/*  PCI MAP register bits (PCI -> Local bus)
- */
-#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
-#define V3_PCI_MAP_M_SWAP               (3 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
-#define V3_PCI_MAP_M_REG_EN             (1 << 1)
-#define V3_PCI_MAP_M_ENABLE             (1 << 0)
-
-/*
- *  LB_BASE0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_BASE_ADR_BASE		0xfff00000
-#define V3_LB_BASE_SWAP			(3 << 8)
-#define V3_LB_BASE_ADR_SIZE		(15 << 4)
-#define V3_LB_BASE_PREFETCH		(1 << 3)
-#define V3_LB_BASE_ENABLE		(1 << 0)
-
-#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
-#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
-#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
-#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
-#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
-#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
-#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
-#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
-#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
-#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
-#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
-#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
-
-#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
-
-/*
- *  LB_MAP0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_MAP_MAP_ADR		0xfff0
-#define V3_LB_MAP_TYPE			(7 << 1)
-#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
-
-#define V3_LB_MAP_TYPE_IACK		(0 << 1)
-#define V3_LB_MAP_TYPE_IO		(1 << 1)
-#define V3_LB_MAP_TYPE_MEM		(3 << 1)
-#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
-#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
-
-#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
-
-/*
- *  LB_BASE2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_BASE2_ADR_BASE		0xff00
-#define V3_LB_BASE2_SWAP		(3 << 6)
-#define V3_LB_BASE2_ENABLE		(1 << 0)
-
-#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
-
-/*
- *  LB_MAP2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_MAP2_MAP_ADR		0xff00
-
-#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
-
-#endif
diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h
deleted file mode 100644
index 61b1d05c7df7..000000000000
--- a/include/asm-arm/hardware/sa1111.h
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/sa1111.h
- *
- * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
- *
- * This file contains definitions for the SA-1111 Companion Chip.
- * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.)
- *
- * Macro that calculates real address for registers in the SA-1111
- */
-
-#ifndef _ASM_ARCH_SA1111
-#define _ASM_ARCH_SA1111
-
-#include <asm/arch/bitfield.h>
-
-/*
- * The SA1111 is always located at virtual 0xf4000000, and is always
- * "native" endian.
- */
-
-#define SA1111_VBASE		0xf4000000
-
-/* Don't use these! */
-#define SA1111_p2v( x )         ((x) - SA1111_BASE + SA1111_VBASE)
-#define SA1111_v2p( x )         ((x) - SA1111_VBASE + SA1111_BASE)
-
-#ifndef __ASSEMBLY__
-#define _SA1111(x)	((x) + sa1111->resource.start)
-#endif
-
-#define sa1111_writel(val,addr)	__raw_writel(val, addr)
-#define sa1111_readl(addr)	__raw_readl(addr)
-
-/*
- * 26 bits of the SA-1110 address bus are available to the SA-1111.
- * Use these when feeding target addresses to the DMA engines.
- */
-
-#define SA1111_ADDR_WIDTH	(26)
-#define SA1111_ADDR_MASK	((1<<SA1111_ADDR_WIDTH)-1)
-#define SA1111_DMA_ADDR(x)	((x)&SA1111_ADDR_MASK)
-
-/*
- * Don't ask the (SAC) DMA engines to move less than this amount.
- */
-
-#define SA1111_SAC_DMA_MIN_XFER	(0x800)
-
-/*
- * System Bus Interface (SBI)
- *
- * Registers
- *    SKCR	Control Register
- *    SMCR	Shared Memory Controller Register
- *    SKID	ID Register
- */
-#define SA1111_SKCR	0x0000
-#define SA1111_SMCR	0x0004
-#define SA1111_SKID	0x0008
-
-#define SKCR_PLL_BYPASS	(1<<0)
-#define SKCR_RCLKEN	(1<<1)
-#define SKCR_SLEEP	(1<<2)
-#define SKCR_DOZE	(1<<3)
-#define SKCR_VCO_OFF	(1<<4)
-#define SKCR_SCANTSTEN	(1<<5)
-#define SKCR_CLKTSTEN	(1<<6)
-#define SKCR_RDYEN	(1<<7)
-#define SKCR_SELAC	(1<<8)
-#define SKCR_OPPC	(1<<9)
-#define SKCR_PLLTSTEN	(1<<10)
-#define SKCR_USBIOTSTEN	(1<<11)
-/*
- * Don't believe the specs!  Take them, throw them outside.  Leave them
- * there for a week.  Spit on them.  Walk on them.  Stamp on them.
- * Pour gasoline over them and finally burn them.  Now think about coding.
- *  - The October 1999 errata (278260-007) says its bit 13, 1 to enable.
- *  - The Feb 2001 errata (278260-010) says that the previous errata
- *    (278260-009) is wrong, and its bit actually 12, fixed in spec
- *    278242-003.
- *  - The SA1111 manual (278242) says bit 12, but 0 to enable.
- *  - Reality is bit 13, 1 to enable.
- *      -- rmk
- */
-#define SKCR_OE_EN	(1<<13)
-
-#define SMCR_DTIM	(1<<0)
-#define SMCR_MBGE	(1<<1)
-#define SMCR_DRAC_0	(1<<2)
-#define SMCR_DRAC_1	(1<<3)
-#define SMCR_DRAC_2	(1<<4)
-#define SMCR_DRAC	Fld(3, 2)
-#define SMCR_CLAT	(1<<5)
-
-#define SKID_SIREV_MASK	(0x000000f0)
-#define SKID_MTREV_MASK (0x0000000f)
-#define SKID_ID_MASK	(0xffffff00)
-#define SKID_SA1111_ID	(0x690cc200)
-
-/*
- * System Controller
- *
- * Registers
- *    SKPCR	Power Control Register
- *    SKCDR	Clock Divider Register
- *    SKAUD	Audio Clock Divider Register
- *    SKPMC	PS/2 Mouse Clock Divider Register
- *    SKPTC	PS/2 Track Pad Clock Divider Register
- *    SKPEN0	PWM0 Enable Register
- *    SKPWM0	PWM0 Clock Register
- *    SKPEN1	PWM1 Enable Register
- *    SKPWM1	PWM1 Clock Register
- */
-#define SA1111_SKPCR	0x0200
-#define SA1111_SKCDR	0x0204
-#define SA1111_SKAUD	0x0208
-#define SA1111_SKPMC	0x020c
-#define SA1111_SKPTC	0x0210
-#define SA1111_SKPEN0	0x0214
-#define SA1111_SKPWM0	0x0218
-#define SA1111_SKPEN1	0x021c
-#define SA1111_SKPWM1	0x0220
-
-#define SKPCR_UCLKEN	(1<<0)
-#define SKPCR_ACCLKEN	(1<<1)
-#define SKPCR_I2SCLKEN	(1<<2)
-#define SKPCR_L3CLKEN	(1<<3)
-#define SKPCR_SCLKEN	(1<<4)
-#define SKPCR_PMCLKEN	(1<<5)
-#define SKPCR_PTCLKEN	(1<<6)
-#define SKPCR_DCLKEN	(1<<7)
-#define SKPCR_PWMCLKEN	(1<<8)
-
-/*
- * USB Host controller
- */
-#define SA1111_USB		0x0400
-
-/*
- * Offsets from SA1111_USB_BASE
- */
-#define SA1111_USB_STATUS	0x0118
-#define SA1111_USB_RESET	0x011c
-#define SA1111_USB_IRQTEST	0x0120
-
-#define USB_RESET_FORCEIFRESET	(1 << 0)
-#define USB_RESET_FORCEHCRESET	(1 << 1)
-#define USB_RESET_CLKGENRESET	(1 << 2)
-#define USB_RESET_SIMSCALEDOWN	(1 << 3)
-#define USB_RESET_USBINTTEST	(1 << 4)
-#define USB_RESET_SLEEPSTBYEN	(1 << 5)
-#define USB_RESET_PWRSENSELOW	(1 << 6)
-#define USB_RESET_PWRCTRLLOW	(1 << 7)
-
-#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
-#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
-#define USB_STATUS_NIRQHCIM       (1 <<  9)
-#define USB_STATUS_NHCIMFCLR      (1 << 10)
-#define USB_STATUS_USBPWRSENSE    (1 << 11)
-
-/*
- * Serial Audio Controller
- *
- * Registers
- *    SACR0             Serial Audio Common Control Register
- *    SACR1             Serial Audio Alternate Mode (I2C/MSB) Control Register
- *    SACR2             Serial Audio AC-link Control Register
- *    SASR0             Serial Audio I2S/MSB Interface & FIFO Status Register
- *    SASR1             Serial Audio AC-link Interface & FIFO Status Register
- *    SASCR             Serial Audio Status Clear Register
- *    L3_CAR            L3 Control Bus Address Register
- *    L3_CDR            L3 Control Bus Data Register
- *    ACCAR             AC-link Command Address Register
- *    ACCDR             AC-link Command Data Register
- *    ACSAR             AC-link Status Address Register
- *    ACSDR             AC-link Status Data Register
- *    SADTCS            Serial Audio DMA Transmit Control/Status Register
- *    SADTSA            Serial Audio DMA Transmit Buffer Start Address A
- *    SADTCA            Serial Audio DMA Transmit Buffer Count Register A
- *    SADTSB            Serial Audio DMA Transmit Buffer Start Address B
- *    SADTCB            Serial Audio DMA Transmit Buffer Count Register B
- *    SADRCS            Serial Audio DMA Receive Control/Status Register
- *    SADRSA            Serial Audio DMA Receive Buffer Start Address A
- *    SADRCA            Serial Audio DMA Receive Buffer Count Register A
- *    SADRSB            Serial Audio DMA Receive Buffer Start Address B
- *    SADRCB            Serial Audio DMA Receive Buffer Count Register B
- *    SAITR             Serial Audio Interrupt Test Register
- *    SADR              Serial Audio Data Register (16 x 32-bit)
- */
-
-#define SA1111_SERAUDIO		0x0600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_SACR0		0x00
-#define SA1111_SACR1		0x04
-#define SA1111_SACR2		0x08
-#define SA1111_SASR0		0x0c
-#define SA1111_SASR1		0x10
-#define SA1111_SASCR		0x18
-#define SA1111_L3_CAR		0x1c
-#define SA1111_L3_CDR		0x20
-#define SA1111_ACCAR		0x24
-#define SA1111_ACCDR		0x28
-#define SA1111_ACSAR		0x2c
-#define SA1111_ACSDR		0x30
-#define SA1111_SADTCS		0x34
-#define SA1111_SADTSA		0x38
-#define SA1111_SADTCA		0x3c
-#define SA1111_SADTSB		0x40
-#define SA1111_SADTCB		0x44
-#define SA1111_SADRCS		0x48
-#define SA1111_SADRSA		0x4c
-#define SA1111_SADRCA		0x50
-#define SA1111_SADRSB		0x54
-#define SA1111_SADRCB		0x58
-#define SA1111_SAITR		0x5c
-#define SA1111_SADR		0x80
-
-#ifndef CONFIG_ARCH_PXA
-
-#define SACR0_ENB	(1<<0)
-#define SACR0_BCKD	(1<<2)
-#define SACR0_RST	(1<<3)
-
-#define SACR1_AMSL	(1<<0)
-#define SACR1_L3EN	(1<<1)
-#define SACR1_L3MB	(1<<2)
-#define SACR1_DREC	(1<<3)
-#define SACR1_DRPL	(1<<4)
-#define SACR1_ENLBF	(1<<5)
-
-#define SACR2_TS3V	(1<<0)
-#define SACR2_TS4V	(1<<1)
-#define SACR2_WKUP	(1<<2)
-#define SACR2_DREC	(1<<3)
-#define SACR2_DRPL	(1<<4)
-#define SACR2_ENLBF	(1<<5)
-#define SACR2_RESET	(1<<6)
-
-#define SASR0_TNF	(1<<0)
-#define SASR0_RNE	(1<<1)
-#define SASR0_BSY	(1<<2)
-#define SASR0_TFS	(1<<3)
-#define SASR0_RFS	(1<<4)
-#define SASR0_TUR	(1<<5)
-#define SASR0_ROR	(1<<6)
-#define SASR0_L3WD	(1<<16)
-#define SASR0_L3RD	(1<<17)
-
-#define SASR1_TNF	(1<<0)
-#define SASR1_RNE	(1<<1)
-#define SASR1_BSY	(1<<2)
-#define SASR1_TFS	(1<<3)
-#define SASR1_RFS	(1<<4)
-#define SASR1_TUR	(1<<5)
-#define SASR1_ROR	(1<<6)
-#define SASR1_CADT	(1<<16)
-#define SASR1_SADR	(1<<17)
-#define SASR1_RSTO	(1<<18)
-#define SASR1_CLPM	(1<<19)
-#define SASR1_CRDY	(1<<20)
-#define SASR1_RS3V	(1<<21)
-#define SASR1_RS4V	(1<<22)
-
-#define SASCR_TUR	(1<<5)
-#define SASCR_ROR	(1<<6)
-#define SASCR_DTS	(1<<16)
-#define SASCR_RDD	(1<<17)
-#define SASCR_STO	(1<<18)
-
-#define SADTCS_TDEN	(1<<0)
-#define SADTCS_TDIE	(1<<1)
-#define SADTCS_TDBDA	(1<<3)
-#define SADTCS_TDSTA	(1<<4)
-#define SADTCS_TDBDB	(1<<5)
-#define SADTCS_TDSTB	(1<<6)
-#define SADTCS_TBIU	(1<<7)
-
-#define SADRCS_RDEN	(1<<0)
-#define SADRCS_RDIE	(1<<1)
-#define SADRCS_RDBDA	(1<<3)
-#define SADRCS_RDSTA	(1<<4)
-#define SADRCS_RDBDB	(1<<5)
-#define SADRCS_RDSTB	(1<<6)
-#define SADRCS_RBIU	(1<<7)
-
-#define SAD_CS_DEN	(1<<0)
-#define SAD_CS_DIE	(1<<1)	/* Not functional on metal 1 */
-#define SAD_CS_DBDA	(1<<3)	/* Not functional on metal 1 */
-#define SAD_CS_DSTA	(1<<4)
-#define SAD_CS_DBDB	(1<<5)	/* Not functional on metal 1 */
-#define SAD_CS_DSTB	(1<<6)
-#define SAD_CS_BIU	(1<<7)	/* Not functional on metal 1 */
-
-#define SAITR_TFS	(1<<0)
-#define SAITR_RFS	(1<<1)
-#define SAITR_TUR	(1<<2)
-#define SAITR_ROR	(1<<3)
-#define SAITR_CADT	(1<<4)
-#define SAITR_SADR	(1<<5)
-#define SAITR_RSTO	(1<<6)
-#define SAITR_TDBDA	(1<<8)
-#define SAITR_TDBDB	(1<<9)
-#define SAITR_RDBDA	(1<<10)
-#define SAITR_RDBDB	(1<<11)
-
-#endif  /* !CONFIG_ARCH_PXA */
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- *    PA_DDR		GPIO Block A Data Direction
- *    PA_DRR/PA_DWR	GPIO Block A Data Value Register (read/write)
- *    PA_SDR		GPIO Block A Sleep Direction
- *    PA_SSR		GPIO Block A Sleep State
- *    PB_DDR		GPIO Block B Data Direction
- *    PB_DRR/PB_DWR	GPIO Block B Data Value Register (read/write)
- *    PB_SDR		GPIO Block B Sleep Direction
- *    PB_SSR		GPIO Block B Sleep State
- *    PC_DDR		GPIO Block C Data Direction
- *    PC_DRR/PC_DWR	GPIO Block C Data Value Register (read/write)
- *    PC_SDR		GPIO Block C Sleep Direction
- *    PC_SSR		GPIO Block C Sleep State
- */
-
-#define _PA_DDR		_SA1111( 0x1000 )
-#define _PA_DRR		_SA1111( 0x1004 )
-#define _PA_DWR		_SA1111( 0x1004 )
-#define _PA_SDR		_SA1111( 0x1008 )
-#define _PA_SSR		_SA1111( 0x100c )
-#define _PB_DDR		_SA1111( 0x1010 )
-#define _PB_DRR		_SA1111( 0x1014 )
-#define _PB_DWR		_SA1111( 0x1014 )
-#define _PB_SDR		_SA1111( 0x1018 )
-#define _PB_SSR		_SA1111( 0x101c )
-#define _PC_DDR		_SA1111( 0x1020 )
-#define _PC_DRR		_SA1111( 0x1024 )
-#define _PC_DWR		_SA1111( 0x1024 )
-#define _PC_SDR		_SA1111( 0x1028 )
-#define _PC_SSR		_SA1111( 0x102c )
-
-#define SA1111_GPIO	0x1000
-
-#define SA1111_GPIO_PADDR	(0x000)
-#define SA1111_GPIO_PADRR	(0x004)
-#define SA1111_GPIO_PADWR	(0x004)
-#define SA1111_GPIO_PASDR	(0x008)
-#define SA1111_GPIO_PASSR	(0x00c)
-#define SA1111_GPIO_PBDDR	(0x010)
-#define SA1111_GPIO_PBDRR	(0x014)
-#define SA1111_GPIO_PBDWR	(0x014)
-#define SA1111_GPIO_PBSDR	(0x018)
-#define SA1111_GPIO_PBSSR	(0x01c)
-#define SA1111_GPIO_PCDDR	(0x020)
-#define SA1111_GPIO_PCDRR	(0x024)
-#define SA1111_GPIO_PCDWR	(0x024)
-#define SA1111_GPIO_PCSDR	(0x028)
-#define SA1111_GPIO_PCSSR	(0x02c)
-
-#define GPIO_A0		(1 << 0)
-#define GPIO_A1		(1 << 1)
-#define GPIO_A2		(1 << 2)
-#define GPIO_A3		(1 << 3)
-
-#define GPIO_B0		(1 << 8)
-#define GPIO_B1		(1 << 9)
-#define GPIO_B2		(1 << 10)
-#define GPIO_B3		(1 << 11)
-#define GPIO_B4		(1 << 12)
-#define GPIO_B5		(1 << 13)
-#define GPIO_B6		(1 << 14)
-#define GPIO_B7		(1 << 15)
-
-#define GPIO_C0		(1 << 16)
-#define GPIO_C1		(1 << 17)
-#define GPIO_C2		(1 << 18)
-#define GPIO_C3		(1 << 19)
-#define GPIO_C4		(1 << 20)
-#define GPIO_C5		(1 << 21)
-#define GPIO_C6		(1 << 22)
-#define GPIO_C7		(1 << 23)
-
-/*
- * Interrupt Controller
- *
- * Registers
- *    INTTEST0		Test register 0
- *    INTTEST1		Test register 1
- *    INTEN0		Interrupt Enable register 0
- *    INTEN1		Interrupt Enable register 1
- *    INTPOL0		Interrupt Polarity selection 0
- *    INTPOL1		Interrupt Polarity selection 1
- *    INTTSTSEL		Interrupt source selection
- *    INTSTATCLR0	Interrupt Status/Clear 0
- *    INTSTATCLR1	Interrupt Status/Clear 1
- *    INTSET0		Interrupt source set 0
- *    INTSET1		Interrupt source set 1
- *    WAKE_EN0		Wake-up source enable 0
- *    WAKE_EN1		Wake-up source enable 1
- *    WAKE_POL0		Wake-up polarity selection 0
- *    WAKE_POL1		Wake-up polarity selection 1
- */
-#define SA1111_INTC		0x1600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_INTTEST0		0x0000
-#define SA1111_INTTEST1		0x0004
-#define SA1111_INTEN0		0x0008
-#define SA1111_INTEN1		0x000c
-#define SA1111_INTPOL0		0x0010
-#define SA1111_INTPOL1		0x0014
-#define SA1111_INTTSTSEL	0x0018
-#define SA1111_INTSTATCLR0	0x001c
-#define SA1111_INTSTATCLR1	0x0020
-#define SA1111_INTSET0		0x0024
-#define SA1111_INTSET1		0x0028
-#define SA1111_WAKEEN0		0x002c
-#define SA1111_WAKEEN1		0x0030
-#define SA1111_WAKEPOL0		0x0034
-#define SA1111_WAKEPOL1		0x0038
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers
- *    PS2CR		Control Register
- *    PS2STAT		Status Register
- *    PS2DATA		Transmit/Receive Data register
- *    PS2CLKDIV		Clock Division Register
- *    PS2PRECNT		Clock Precount Register
- *    PS2TEST1		Test register 1
- *    PS2TEST2		Test register 2
- *    PS2TEST3		Test register 3
- *    PS2TEST4		Test register 4
- */
-
-#define SA1111_KBD		0x0a00
-#define SA1111_MSE		0x0c00
-
-/*
- * These are offsets from the above bases.
- */
-#define SA1111_PS2CR		0x0000
-#define SA1111_PS2STAT		0x0004
-#define SA1111_PS2DATA		0x0008
-#define SA1111_PS2CLKDIV	0x000c
-#define SA1111_PS2PRECNT	0x0010
-
-#define PS2CR_ENA		0x08
-#define PS2CR_FKD		0x02
-#define PS2CR_FKC		0x01
-
-#define PS2STAT_STP		0x0100
-#define PS2STAT_TXE		0x0080
-#define PS2STAT_TXB		0x0040
-#define PS2STAT_RXF		0x0020
-#define PS2STAT_RXB		0x0010
-#define PS2STAT_ENA		0x0008
-#define PS2STAT_RXP		0x0004
-#define PS2STAT_KBD		0x0002
-#define PS2STAT_KBC		0x0001
-
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- */
-
-#define SA1111_PCMCIA	0x1600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_PCCR	0x0000
-#define SA1111_PCSSR	0x0004
-#define SA1111_PCSR	0x0008
-
-#define PCSR_S0_READY	(1<<0)
-#define PCSR_S1_READY	(1<<1)
-#define PCSR_S0_DETECT	(1<<2)
-#define PCSR_S1_DETECT	(1<<3)
-#define PCSR_S0_VS1	(1<<4)
-#define PCSR_S0_VS2	(1<<5)
-#define PCSR_S1_VS1	(1<<6)
-#define PCSR_S1_VS2	(1<<7)
-#define PCSR_S0_WP	(1<<8)
-#define PCSR_S1_WP	(1<<9)
-#define PCSR_S0_BVD1	(1<<10)
-#define PCSR_S0_BVD2	(1<<11)
-#define PCSR_S1_BVD1	(1<<12)
-#define PCSR_S1_BVD2	(1<<13)
-
-#define PCCR_S0_RST	(1<<0)
-#define PCCR_S1_RST	(1<<1)
-#define PCCR_S0_FLT	(1<<2)
-#define PCCR_S1_FLT	(1<<3)
-#define PCCR_S0_PWAITEN	(1<<4)
-#define PCCR_S1_PWAITEN	(1<<5)
-#define PCCR_S0_PSE	(1<<6)
-#define PCCR_S1_PSE	(1<<7)
-
-#define PCSSR_S0_SLEEP	(1<<0)
-#define PCSSR_S1_SLEEP	(1<<1)
-
-
-
-
-extern struct bus_type sa1111_bus_type;
-
-#define SA1111_DEVID_SBI	0
-#define SA1111_DEVID_SK		1
-#define SA1111_DEVID_USB	2
-#define SA1111_DEVID_SAC	3
-#define SA1111_DEVID_SSP	4
-#define SA1111_DEVID_PS2	5
-#define SA1111_DEVID_GPIO	6
-#define SA1111_DEVID_INT	7
-#define SA1111_DEVID_PCMCIA	8
-
-struct sa1111_dev {
-	struct device	dev;
-	unsigned int	devid;
-	struct resource	res;
-	void __iomem	*mapbase;
-	unsigned int	skpcr_mask;
-	unsigned int	irq[6];
-	u64		dma_mask;
-};
-
-#define SA1111_DEV(_d)	container_of((_d), struct sa1111_dev, dev)
-
-#define sa1111_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
-#define sa1111_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
-
-struct sa1111_driver {
-	struct device_driver	drv;
-	unsigned int		devid;
-	int (*probe)(struct sa1111_dev *);
-	int (*remove)(struct sa1111_dev *);
-	int (*suspend)(struct sa1111_dev *, pm_message_t);
-	int (*resume)(struct sa1111_dev *);
-};
-
-#define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
-
-#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
-
-/*
- * These frob the SKPCR register.
- */
-void sa1111_enable_device(struct sa1111_dev *);
-void sa1111_disable_device(struct sa1111_dev *);
-
-unsigned int sa1111_pll_clock(struct sa1111_dev *);
-
-#define SA1111_AUDIO_ACLINK	0
-#define SA1111_AUDIO_I2S	1
-
-void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode);
-int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate);
-int sa1111_get_audio_rate(struct sa1111_dev *sadev);
-
-int sa1111_check_dma_bug(dma_addr_t addr);
-
-int sa1111_driver_register(struct sa1111_driver *);
-void sa1111_driver_unregister(struct sa1111_driver *);
-
-void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir);
-void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
-void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
-
-#endif  /* _ASM_ARCH_SA1111 */
diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h
deleted file mode 100644
index dfb8330599f9..000000000000
--- a/include/asm-arm/hardware/scoop.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  Definitions for the SCOOP interface found on various Sharp PDAs
- *
- *  Copyright (c) 2004 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#define SCOOP_MCR  0x00
-#define SCOOP_CDR  0x04
-#define SCOOP_CSR  0x08
-#define SCOOP_CPR  0x0C
-#define SCOOP_CCR  0x10
-#define SCOOP_IRR  0x14
-#define SCOOP_IRM  0x14
-#define SCOOP_IMR  0x18
-#define SCOOP_ISR  0x1C
-#define SCOOP_GPCR 0x20
-#define SCOOP_GPWR 0x24
-#define SCOOP_GPRR 0x28
-
-#define SCOOP_GPCR_PA22	( 1 << 12 )
-#define SCOOP_GPCR_PA21	( 1 << 11 )
-#define SCOOP_GPCR_PA20	( 1 << 10 )
-#define SCOOP_GPCR_PA19	( 1 << 9 )
-#define SCOOP_GPCR_PA18	( 1 << 8 )
-#define SCOOP_GPCR_PA17	( 1 << 7 )
-#define SCOOP_GPCR_PA16	( 1 << 6 )
-#define SCOOP_GPCR_PA15	( 1 << 5 )
-#define SCOOP_GPCR_PA14	( 1 << 4 )
-#define SCOOP_GPCR_PA13	( 1 << 3 )
-#define SCOOP_GPCR_PA12	( 1 << 2 )
-#define SCOOP_GPCR_PA11	( 1 << 1 )
-
-struct scoop_config {
-	unsigned short io_out;
-	unsigned short io_dir;
-	unsigned short suspend_clr;
-	unsigned short suspend_set;
-	int gpio_base;
-};
-
-/* Structure for linking scoop devices to PCMCIA sockets */
-struct scoop_pcmcia_dev {
-	struct device *dev;     /* Pointer to this socket's scoop device */
-	int	irq;                /* irq for socket */
-	int cd_irq;
-	const char *cd_irq_str;
-	unsigned char keep_vs;
-	unsigned char keep_rd;
-};
-
-struct scoop_pcmcia_config {
-	struct scoop_pcmcia_dev *devs;
-	int num_devs;
-	void (*pcmcia_init)(void);
-	void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
-};
-
-extern struct scoop_pcmcia_config *platform_scoop_config;
-
-void reset_scoop(struct device *dev);
-unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
-unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
-unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
-void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h
deleted file mode 100644
index 2d00db22b981..000000000000
--- a/include/asm-arm/hardware/sharpsl_pm.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * SharpSL Battery/PM Driver
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/interrupt.h>
-
-struct sharpsl_charger_machinfo {
-	void (*init)(void);
-	void (*exit)(void);
-	int gpio_acin;
-	int gpio_batfull;
-	int batfull_irq;
-	int gpio_batlock;
-	int gpio_fatal;
-	void (*discharge)(int);
-	void (*discharge1)(int);
-	void (*charge)(int);
-	void (*measure_temp)(int);
-	void (*presuspend)(void);
-	void (*postsuspend)(void);
-	void (*earlyresume)(void);
-	unsigned long (*read_devdata)(int);
-#define SHARPSL_BATT_VOLT       1
-#define SHARPSL_BATT_TEMP       2
-#define SHARPSL_ACIN_VOLT       3
-#define SHARPSL_STATUS_ACIN     4
-#define SHARPSL_STATUS_LOCK     5
-#define SHARPSL_STATUS_CHRGFULL 6
-#define SHARPSL_STATUS_FATAL    7
-	unsigned long (*charger_wakeup)(void);
-	int (*should_wakeup)(unsigned int resume_on_alarm);
-	void (*backlight_limit)(int);
-	int (*backlight_get_status) (void);
-	int charge_on_volt;
-	int charge_on_temp;
-	int charge_acin_high;
-	int charge_acin_low;
-	int fatal_acin_volt;
-	int fatal_noacin_volt;
-	int bat_levels;
-	struct battery_thresh *bat_levels_noac;
-	struct battery_thresh *bat_levels_acin;
-	struct battery_thresh *bat_levels_noac_bl;
-	struct battery_thresh *bat_levels_acin_bl;
-	int status_high_acin;
-	int status_low_acin;
-	int status_high_noac;
-	int status_low_noac;
-};
-
-struct battery_thresh {
-	int voltage;
-	int percentage;
-};
-
-struct battery_stat {
-	int ac_status;         /* APM AC Present/Not Present */
-	int mainbat_status;    /* APM Main Battery Status */
-	int mainbat_percent;   /* Main Battery Percentage Charge */
-	int mainbat_voltage;   /* Main Battery Voltage */
-};
-
-struct sharpsl_pm_status {
-	struct device *dev;
-	struct timer_list ac_timer;
-	struct timer_list chrg_full_timer;
-
-	int charge_mode;
-#define CHRG_ERROR    (-1)
-#define CHRG_OFF      (0)
-#define CHRG_ON       (1)
-#define CHRG_DONE     (2)
-
-	unsigned int flags;
-#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
-#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
-#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
-#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
-#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
-
-	int full_count;
-	unsigned long charge_start_time;
-	struct sharpsl_charger_machinfo *machinfo;
-	struct battery_stat battstat;
-};
-
-extern struct sharpsl_pm_status sharpsl_pm;
-
-
-#define SHARPSL_LED_ERROR  2
-#define SHARPSL_LED_ON     1
-#define SHARPSL_LED_OFF    0
-
-void sharpsl_battery_kick(void);
-void sharpsl_pm_led(int val);
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
-
diff --git a/include/asm-arm/hardware/ssp.h b/include/asm-arm/hardware/ssp.h
deleted file mode 100644
index 3b42e181997c..000000000000
--- a/include/asm-arm/hardware/ssp.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  ssp.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef SSP_H
-#define SSP_H
-
-struct ssp_state {
-	unsigned int	cr0;
-	unsigned int	cr1;
-};
-
-int ssp_write_word(u16 data);
-int ssp_read_word(u16 *data);
-int ssp_flush(void);
-void ssp_enable(void);
-void ssp_disable(void);
-void ssp_save_state(struct ssp_state *ssp);
-void ssp_restore_state(struct ssp_state *ssp);
-int ssp_init(void);
-void ssp_exit(void);
-
-#endif
diff --git a/include/asm-arm/hardware/uengine.h b/include/asm-arm/hardware/uengine.h
deleted file mode 100644
index b442d65c6593..000000000000
--- a/include/asm-arm/hardware/uengine.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Generic library functions for the microengines found on the Intel
- * IXP2000 series of network processors.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __IXP2000_UENGINE_H
-#define __IXP2000_UENGINE_H
-
-extern u32 ixp2000_uengine_mask;
-
-struct ixp2000_uengine_code
-{
-	u32	cpu_model_bitmask;
-	u8	cpu_min_revision;
-	u8	cpu_max_revision;
-
-	u32	uengine_parameters;
-
-	struct ixp2000_reg_value {
-		int	reg;
-		u32	value;
-	} *initial_reg_values;
-
-	int	num_insns;
-	u8	*insns;
-};
-
-u32 ixp2000_uengine_csr_read(int uengine, int offset);
-void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
-void ixp2000_uengine_reset(u32 uengine_mask);
-void ixp2000_uengine_set_mode(int uengine, u32 mode);
-void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
-void ixp2000_uengine_init_context(int uengine, int context, int pc);
-void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
-void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
-int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
-
-#define IXP2000_UENGINE_8_CONTEXTS		0x00000000
-#define IXP2000_UENGINE_4_CONTEXTS		0x80000000
-#define IXP2000_UENGINE_PRN_UPDATE_EVERY	0x40000000
-#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS	0x00000000
-#define IXP2000_UENGINE_NN_FROM_SELF		0x00100000
-#define IXP2000_UENGINE_NN_FROM_PREVIOUS	0x00000000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3	0x000c0000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2	0x00080000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1	0x00040000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0	0x00000000
-#define IXP2000_UENGINE_LM_ADDR1_GLOBAL		0x00020000
-#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT	0x00000000
-#define IXP2000_UENGINE_LM_ADDR0_GLOBAL		0x00010000
-#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT	0x00000000
-
-
-#endif
diff --git a/include/asm-arm/hardware/vic.h b/include/asm-arm/hardware/vic.h
deleted file mode 100644
index ed9ca3736a0b..000000000000
--- a/include/asm-arm/hardware/vic.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/vic.h
- *
- *  Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_HARDWARE_VIC_H
-#define __ASM_ARM_HARDWARE_VIC_H
-
-#define VIC_IRQ_STATUS			0x00
-#define VIC_FIQ_STATUS			0x04
-#define VIC_RAW_STATUS			0x08
-#define VIC_INT_SELECT			0x0c	/* 1 = FIQ, 0 = IRQ */
-#define VIC_INT_ENABLE			0x10	/* 1 = enable, 0 = disable */
-#define VIC_INT_ENABLE_CLEAR		0x14
-#define VIC_INT_SOFT			0x18
-#define VIC_INT_SOFT_CLEAR		0x1c
-#define VIC_PROTECT			0x20
-#define VIC_VECT_ADDR			0x30
-#define VIC_DEF_VECT_ADDR		0x34
-
-#define VIC_VECT_ADDR0			0x100	/* 0 to 15 */
-#define VIC_VECT_CNTL0			0x200	/* 0 to 15 */
-#define VIC_ITCR			0x300	/* VIC test control register */
-
-#define VIC_VECT_CNTL_ENABLE		(1 << 5)
-
-#ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
-#endif
-
-#endif
diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h
deleted file mode 100644
index f1a08a500604..000000000000
--- a/include/asm-arm/hw_irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Nothing to see here yet
- */
-#ifndef _ARCH_ARM_HW_IRQ_H
-#define _ARCH_ARM_HW_IRQ_H
-
-#include <asm/mach/irq.h>
-
-#endif
diff --git a/include/asm-arm/hwcap.h b/include/asm-arm/hwcap.h
deleted file mode 100644
index 81f4c899a555..000000000000
--- a/include/asm-arm/hwcap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASMARM_HWCAP_H
-#define __ASMARM_HWCAP_H
-
-/*
- * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
- */
-#define HWCAP_SWP	1
-#define HWCAP_HALF	2
-#define HWCAP_THUMB	4
-#define HWCAP_26BIT	8	/* Play it safe */
-#define HWCAP_FAST_MULT	16
-#define HWCAP_FPA	32
-#define HWCAP_VFP	64
-#define HWCAP_EDSP	128
-#define HWCAP_JAVA	256
-#define HWCAP_IWMMXT	512
-#define HWCAP_CRUNCH	1024
-#define HWCAP_THUMBEE	2048
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-/*
- * This yields a mask that user programs can use to figure out what
- * instruction set this cpu supports.
- */
-#define ELF_HWCAP	(elf_hwcap)
-extern unsigned int elf_hwcap;
-#endif
-
-#endif
diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h
deleted file mode 100644
index 88f4d231ce4f..000000000000
--- a/include/asm-arm/ide.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/include/asm-arm/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the ARM architecture specific IDE code.
- */
-
-#ifndef __ASMARM_IDE_H
-#define __ASMARM_IDE_H
-
-#ifdef __KERNEL__
-
-#ifndef MAX_HWIFS
-#define MAX_HWIFS	4
-#endif
-
-#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
-#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
-#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
-#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMARM_IDE_H */
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
deleted file mode 100644
index eebe56e74d6d..000000000000
--- a/include/asm-arm/io.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  linux/include/asm-arm/io.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
- *			constant addresses and variable addresses.
- *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
- *			specific IO header files.
- *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
- *  04-Apr-1999	PJB	Added check_signature.
- *  12-Dec-1999	RMK	More cleanups
- *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
- *  05-Oct-2004 BJD     Moved memory string functions to use void __iomem
- */
-#ifndef __ASM_ARM_IO_H
-#define __ASM_ARM_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/memory.h>
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * Generic IO read/write.  These perform native-endian accesses.  Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
-extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
-extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
-extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-
-extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
-extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
-extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
-#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
-#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
-
-#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
-#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
-#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
-
-/*
- * Architecture ioremap implementation.
- */
-#define MT_DEVICE		0
-#define MT_DEVICE_NONSHARED	1
-#define MT_DEVICE_CACHED	2
-#define MT_DEVICE_IXP2000	3
-/*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
- * for ioremap
- */
-
-/*
- * __arm_ioremap takes CPU physical address.
- * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
- */
-extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
-extern void __iounmap(volatile void __iomem *addr);
-
-/*
- * Bad read/write accesses...
- */
-extern void __readwrite_bug(const char *fn);
-
-/*
- * Now, pick up the machine-defined IO definitions
- */
-#include <asm/arch/io.h>
-
-/*
- *  IO port access primitives
- *  -------------------------
- *
- * The ARM doesn't have special IO access instructions; all IO is memory
- * mapped.  Note that these are defined to perform little endian accesses
- * only.  Their primary purpose is to access PCI and ISA peripherals.
- *
- * Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place, as described by numerous
- * ARM documents:
- *
- *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
- *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
- *
- * The machine specific io.h include defines __io to translate an "IO"
- * address to a memory address.
- *
- * Note that we prevent GCC re-ordering or caching values in expressions
- * by introducing sequence points into the in*() definitions.  Note that
- * __raw_* do not guarantee this behaviour.
- *
- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
- */
-#ifdef __io
-#define outb(v,p)		__raw_writeb(v,__io(p))
-#define outw(v,p)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__io(p))
-#define outl(v,p)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__io(p))
-
-#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __v; })
-#define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
-			__raw_readw(__io(p))); __v; })
-#define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
-			__raw_readl(__io(p))); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
-#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
-#define outsl(p,d,l)		__raw_writesl(__io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
-#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
-#define insl(p,d,l)		__raw_readsl(__io(p),d,l)
-#endif
-
-#define outb_p(val,port)	outb((val),(port))
-#define outw_p(val,port)	outw((val),(port))
-#define outl_p(val,port)	outl((val),(port))
-#define inb_p(port)		inb((port))
-#define inw_p(port)		inw((port))
-#define inl_p(port)		inl((port))
-
-#define outsb_p(port,from,len)	outsb(port,from,len)
-#define outsw_p(port,from,len)	outsw(port,from,len)
-#define outsl_p(port,from,len)	outsl(port,from,len)
-#define insb_p(port,to,len)	insb(port,to,len)
-#define insw_p(port,to,len)	insw(port,to,len)
-#define insl_p(port,to,len)	insl(port,to,len)
-
-/*
- * String version of IO memory access ops:
- */
-extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t);
-extern void _memcpy_toio(volatile void __iomem *, const void *, size_t);
-extern void _memset_io(volatile void __iomem *, int, size_t);
-
-#define mmiowb()
-
-/*
- *  Memory access primitives
- *  ------------------------
- *
- * These perform PCI memory accesses via an ioremap region.  They don't
- * take an address as such, but a cookie.
- *
- * Again, this are defined to perform little endian accesses.  See the
- * IO port primitives for more information.
- */
-#ifdef __mem_pci
-#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
-					__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
-					__raw_readl(__mem_pci(c))); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
-#define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
-#define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
-
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__mem_pci(c))
-
-#define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
-#define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
-#define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
-
-#define memset_io(c,v,l)	_memset_io(__mem_pci(c),(v),(l))
-#define memcpy_fromio(a,c,l)	_memcpy_fromio((a),__mem_pci(c),(l))
-#define memcpy_toio(c,a,l)	_memcpy_toio(__mem_pci(c),(a),(l))
-
-#elif !defined(readb)
-
-#define readb(c)			(__readwrite_bug("readb"),0)
-#define readw(c)			(__readwrite_bug("readw"),0)
-#define readl(c)			(__readwrite_bug("readl"),0)
-#define writeb(v,c)			__readwrite_bug("writeb")
-#define writew(v,c)			__readwrite_bug("writew")
-#define writel(v,c)			__readwrite_bug("writel")
-
-#define check_signature(io,sig,len)	(0)
-
-#endif	/* __mem_pci */
-
-/*
- * ioremap and friends.
- *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/IO-mapping.txt.
- *
- */
-#ifndef __arch_ioremap
-#define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
-#define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
-#define iounmap(cookie)			__iounmap(cookie)
-#else
-#define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define iounmap(cookie)			__arch_iounmap(cookie)
-#endif
-
-/*
- * io{read,write}{8,16,32} macros
- */
-#ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
-
-#define iowrite8(v,p)	__raw_writeb(v, p)
-#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
-#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
-
-#define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
-#define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
-#define ioread32_rep(p,d,c)	__raw_readsl(p,d,c)
-
-#define iowrite8_rep(p,s,c)	__raw_writesb(p,s,c)
-#define iowrite16_rep(p,s,c)	__raw_writesw(p,s,c)
-#define iowrite32_rep(p,s,c)	__raw_writesl(p,s,c)
-
-extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
-extern void ioport_unmap(void __iomem *addr);
-#endif
-
-struct pci_dev;
-
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen);
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-
-/*
- * can the hardware map this into one segment or not, given no other
- * constraints.
- */
-#define BIOVEC_MERGEABLE(vec1, vec2)	\
-	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
-
-#ifdef CONFIG_MMU
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern int valid_phys_addr_range(unsigned long addr, size_t size);
-extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
- * Register ISA memory and port locations for glibc iopl/inb/outb
- * emulation.
- */
-extern void register_isa_ports(unsigned int mmio, unsigned int io,
-			       unsigned int io_shift);
-
-#endif	/* __KERNEL__ */
-#endif	/* __ASM_ARM_IO_H */
diff --git a/include/asm-arm/ioctl.h b/include/asm-arm/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-arm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h
deleted file mode 100644
index a91d8a1523cf..000000000000
--- a/include/asm-arm/ioctls.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef __ASM_ARM_IOCTLS_H
-#define __ASM_ARM_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
-
-#endif
diff --git a/include/asm-arm/ipcbuf.h b/include/asm-arm/ipcbuf.h
deleted file mode 100644
index 97683975f7df..000000000000
--- a/include/asm-arm/ipcbuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASMARM_IPCBUF_H
-#define __ASMARM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __ASMARM_IPCBUF_H */
diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h
deleted file mode 100644
index 1b882a255e35..000000000000
--- a/include/asm-arm/irq.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_ARM_IRQ_H
-#define __ASM_ARM_IRQ_H
-
-#include <asm/arch/irqs.h>
-
-#ifndef irq_canonicalize
-#define irq_canonicalize(i)	(i)
-#endif
-
-#ifndef NR_IRQS
-#define NR_IRQS	128
-#endif
-
-/*
- * Use this value to indicate lack of interrupt
- * capability
- */
-#ifndef NO_IRQ
-#define NO_IRQ	((unsigned int)(-1))
-#endif
-
-
-/*
- * Migration helpers
- */
-#define __IRQT_FALEDGE	IRQ_TYPE_EDGE_FALLING
-#define __IRQT_RISEDGE	IRQ_TYPE_EDGE_RISING
-#define __IRQT_LOWLVL	IRQ_TYPE_LEVEL_LOW
-#define __IRQT_HIGHLVL	IRQ_TYPE_LEVEL_HIGH
-
-#define IRQT_NOEDGE	(0)
-#define IRQT_RISING	(__IRQT_RISEDGE)
-#define IRQT_FALLING	(__IRQT_FALEDGE)
-#define IRQT_BOTHEDGE	(__IRQT_RISEDGE|__IRQT_FALEDGE)
-#define IRQT_LOW	(__IRQT_LOWLVL)
-#define IRQT_HIGH	(__IRQT_HIGHLVL)
-#define IRQT_PROBE	IRQ_TYPE_PROBE
-
-#ifndef __ASSEMBLY__
-struct irqaction;
-extern void migrate_irqs(void);
-#endif
-
-#endif
-
diff --git a/include/asm-arm/irq_regs.h b/include/asm-arm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-arm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-arm/irqflags.h b/include/asm-arm/irqflags.h
deleted file mode 100644
index 6d09974e6646..000000000000
--- a/include/asm-arm/irqflags.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef __ASM_ARM_IRQFLAGS_H
-#define __ASM_ARM_IRQFLAGS_H
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-
-/*
- * CPU interrupt mask handling.
- */
-#if __LINUX_ARM_ARCH__ >= 6
-
-#define raw_local_irq_save(x)					\
-	({							\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_save\n"	\
-	"cpsid	i"						\
-	: "=r" (x) : : "memory", "cc");				\
-	})
-
-#define raw_local_irq_enable()  __asm__("cpsie i	@ __sti" : : : "memory", "cc")
-#define raw_local_irq_disable() __asm__("cpsid i	@ __cli" : : : "memory", "cc")
-#define local_fiq_enable()  __asm__("cpsie f	@ __stf" : : : "memory", "cc")
-#define local_fiq_disable() __asm__("cpsid f	@ __clf" : : : "memory", "cc")
-
-#else
-
-/*
- * Save the current interrupt enable state & disable IRQs
- */
-#define raw_local_irq_save(x)					\
-	({							\
-		unsigned long temp;				\
-		(void) (&temp == &x);				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_save\n"	\
-"	orr	%1, %0, #128\n"					\
-"	msr	cpsr_c, %1"					\
-	: "=r" (x), "=r" (temp)					\
-	:							\
-	: "memory", "cc");					\
-	})
-	
-/*
- * Enable IRQs
- */
-#define raw_local_irq_enable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_enable\n"	\
-"	bic	%0, %0, #128\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
-
-/*
- * Disable IRQs
- */
-#define raw_local_irq_disable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_disable\n"	\
-"	orr	%0, %0, #128\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
-
-/*
- * Enable FIQs
- */
-#define local_fiq_enable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ stf\n"		\
-"	bic	%0, %0, #64\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
-
-/*
- * Disable FIQs
- */
-#define local_fiq_disable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ clf\n"		\
-"	orr	%0, %0, #64\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
-
-#endif
-
-/*
- * Save the current interrupt enable state.
- */
-#define raw_local_save_flags(x)					\
-	({							\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_save_flags"	\
-	: "=r" (x) : : "memory", "cc");				\
-	})
-
-/*
- * restore saved IRQ & FIQ state
- */
-#define raw_local_irq_restore(x)				\
-	__asm__ __volatile__(					\
-	"msr	cpsr_c, %0		@ local_irq_restore\n"	\
-	:							\
-	: "r" (x)						\
-	: "memory", "cc")
-
-#define raw_irqs_disabled_flags(flags)	\
-({					\
-	(int)((flags) & PSR_I_BIT);	\
-})
-
-#endif
-#endif
diff --git a/include/asm-arm/kdebug.h b/include/asm-arm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/include/asm-arm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h
deleted file mode 100644
index c8986bb99ed5..000000000000
--- a/include/asm-arm/kexec.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ARM_KEXEC_H
-#define _ARM_KEXEC_H
-
-#ifdef CONFIG_KEXEC
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-
-#define KEXEC_CONTROL_CODE_SIZE	4096
-
-#define KEXEC_ARCH KEXEC_ARCH_ARM
-
-#define KEXEC_ARM_ATAGS_OFFSET  0x1000
-#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
-
-#ifndef __ASSEMBLY__
-
-struct kimage;
-/* Provide a dummy definition to avoid build failures. */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs) { }
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_KEXEC */
-
-#endif /* _ARM_KEXEC_H */
diff --git a/include/asm-arm/kmap_types.h b/include/asm-arm/kmap_types.h
deleted file mode 100644
index 45def13ee17a..000000000000
--- a/include/asm-arm/kmap_types.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __ARM_KMAP_TYPES_H
-#define __ARM_KMAP_TYPES_H
-
-/*
- * This is the "bare minimum".  AIO seems to require this.
- */
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
-
-#endif
diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h
deleted file mode 100644
index b1a37876942d..000000000000
--- a/include/asm-arm/kprobes.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * include/asm-arm/kprobes.h
- *
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef _ARM_KPROBES_H
-#define _ARM_KPROBES_H
-
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-
-#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE			2
-#define MAX_STACK_SIZE			64	/* 32 would probably be OK */
-
-/*
- * This undefined instruction must be unique and
- * reserved solely for kprobes' use.
- */
-#define KPROBE_BREAKPOINT_INSTRUCTION	0xe7f001f8
-
-#define regs_return_value(regs)		((regs)->ARM_r0)
-#define flush_insn_slot(p)		do { } while (0)
-#define kretprobe_blacklist_size	0
-
-typedef u32 kprobe_opcode_t;
-
-struct kprobe;
-typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
-
-/* Architecture specific copy of original instruction. */
-struct arch_specific_insn {
-	kprobe_opcode_t		*insn;
-	kprobe_insn_handler_t	*insn_handler;
-};
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned int status;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-	unsigned int kprobe_status;
-	struct prev_kprobe prev_kprobe;
-	struct pt_regs jprobe_saved_regs;
-	char jprobes_stack[MAX_STACK_SIZE];
-};
-
-void arch_remove_kprobe(struct kprobe *);
-void kretprobe_trampoline(void);
-
-int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
-int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
-
-enum kprobe_insn {
-	INSN_REJECTED,
-	INSN_GOOD,
-	INSN_GOOD_NO_SLOT
-};
-
-enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
-					struct arch_specific_insn *);
-void __init arm_kprobe_decode_init(void);
-
-#endif /* _ARM_KPROBES_H */
diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h
deleted file mode 100644
index cb3c08cbcb9e..000000000000
--- a/include/asm-arm/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_ARM_H
-#define __LINUX_KVM_ARM_H
-
-/* arm does not support KVM */
-
-#endif
diff --git a/include/asm-arm/leds.h b/include/asm-arm/leds.h
deleted file mode 100644
index 12290ea55801..000000000000
--- a/include/asm-arm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/leds.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Event-driven interface for LEDs on machines
- *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
-	led_idle_start,
-	led_idle_end,
-	led_timer,
-	led_start,
-	led_stop,
-	led_claim,		/* override idle & timer leds */
-	led_release,		/* restore idle & timer leds */
-	led_start_timer_mode,
-	led_stop_timer_mode,
-	led_green_on,
-	led_green_off,
-	led_amber_on,
-	led_amber_off,
-	led_red_on,
-	led_red_off,
-	led_blue_on,
-	led_blue_off,
-	/*
-	 * I want this between led_timer and led_start, but
-	 * someone has decided to export this to user space
-	 */
-	led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/include/asm-arm/limits.h b/include/asm-arm/limits.h
deleted file mode 100644
index 08d8c6600804..000000000000
--- a/include/asm-arm/limits.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_PIPE_H
-#define __ASM_PIPE_H
-
-#ifndef PAGE_SIZE
-#include <asm/page.h>
-#endif
-
-#define PIPE_BUF	PAGE_SIZE
-
-#endif
-
diff --git a/include/asm-arm/linkage.h b/include/asm-arm/linkage.h
deleted file mode 100644
index 5a25632b1bc0..000000000000
--- a/include/asm-arm/linkage.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .align 0
-#define __ALIGN_STR ".align 0"
-
-#define ENDPROC(name) \
-  .type name, %function; \
-  END(name)
-
-#endif
diff --git a/include/asm-arm/local.h b/include/asm-arm/local.h
deleted file mode 100644
index c11c530f74d0..000000000000
--- a/include/asm-arm/local.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local.h>
diff --git a/include/asm-arm/locks.h b/include/asm-arm/locks.h
deleted file mode 100644
index 852220eecdbc..000000000000
--- a/include/asm-arm/locks.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- *  linux/include/asm-arm/locks.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Interrupt safe locking assembler. 
- */
-#ifndef __ASM_PROC_LOCKS_H
-#define __ASM_PROC_LOCKS_H
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-#define __down_op(ptr,fail)			\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op\n"				\
-"1:	ldrex	lr, [%0]\n"			\
-"	sub	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	movmi	ip, %0\n"			\
-"	blmi	" #fail				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __down_op_ret(ptr,fail)			\
-	({					\
-		unsigned int ret;		\
-	__asm__ __volatile__(			\
-	"@ down_op_ret\n"			\
-"1:	ldrex	lr, [%1]\n"			\
-"	sub	lr, lr, %2\n"			\
-"	strex	ip, lr, [%1]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	movmi	ip, %1\n"			\
-"	movpl	ip, #0\n"			\
-"	blmi	" #fail "\n"			\
-"	mov	%0, ip"				\
-	: "=&r" (ret)				\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	ret;					\
-	})
-
-#define __up_op(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op\n"				\
-"1:	ldrex	lr, [%0]\n"			\
-"	add	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	cmp	lr, #0\n"			\
-"	movle	ip, %0\n"			\
-"	blle	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-/*
- * The value 0x01000000 supports up to 128 processors and
- * lots of processes.  BIAS must be chosen such that sub'ing
- * BIAS once per CPU will result in the long remaining
- * negative.
- */
-#define RW_LOCK_BIAS      0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __down_op_write(ptr,fail)		\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op_write\n"			\
-"1:	ldrex	lr, [%0]\n"			\
-"	sub	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	movne	ip, %0\n"			\
-"	blne	" #fail				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __up_op_write(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op_write\n"			\
-"1:	ldrex	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	movcs	ip, %0\n"			\
-"	blcs	" #wake				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	})
-
-#define __down_op_read(ptr,fail)		\
-	__down_op(ptr, fail)
-
-#define __up_op_read(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op_read\n"			\
-"1:	ldrex	lr, [%0]\n"			\
-"	add	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	moveq	ip, %0\n"			\
-"	bleq	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-#else
-
-#define __down_op(ptr,fail)			\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op\n"				\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	subs	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movmi	ip, %0\n"			\
-"	blmi	" #fail				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __down_op_ret(ptr,fail)			\
-	({					\
-		unsigned int ret;		\
-	__asm__ __volatile__(			\
-	"@ down_op_ret\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%1]\n"			\
-"	subs	lr, lr, %2\n"			\
-"	str	lr, [%1]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movmi	ip, %1\n"			\
-"	movpl	ip, #0\n"			\
-"	blmi	" #fail "\n"			\
-"	mov	%0, ip"				\
-	: "=&r" (ret)				\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	ret;					\
-	})
-
-#define __up_op(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op\n"				\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movle	ip, %0\n"			\
-"	blle	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-/*
- * The value 0x01000000 supports up to 128 processors and
- * lots of processes.  BIAS must be chosen such that sub'ing
- * BIAS once per CPU will result in the long remaining
- * negative.
- */
-#define RW_LOCK_BIAS      0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __down_op_write(ptr,fail)		\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op_write\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	subs	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movne	ip, %0\n"			\
-"	blne	" #fail				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __up_op_write(ptr,wake)			\
-	({					\
-	__asm__ __volatile__(			\
-	"@ up_op_write\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movcs	ip, %0\n"			\
-"	blcs	" #wake				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __down_op_read(ptr,fail)		\
-	__down_op(ptr, fail)
-
-#define __up_op_read(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op_read\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	moveq	ip, %0\n"			\
-"	bleq	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-#endif
-
-#endif
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
deleted file mode 100644
index bcc8aed7c9a9..000000000000
--- a/include/asm-arm/mach/arch.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/arch.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASSEMBLY__
-
-struct tag;
-struct meminfo;
-struct sys_timer;
-
-struct machine_desc {
-	/*
-	 * Note! The first four elements are used
-	 * by assembler code in head.S, head-common.S
-	 */
-	unsigned int		nr;		/* architecture number	*/
-	unsigned int		phys_io;	/* start of physical io	*/
-	unsigned int		io_pg_offst;	/* byte offset for io 
-						 * page tabe entry	*/
-
-	const char		*name;		/* architecture name	*/
-	unsigned long		boot_params;	/* tagged list		*/
-
-	unsigned int		video_start;	/* start of video RAM	*/
-	unsigned int		video_end;	/* end of video RAM	*/
-
-	unsigned int		reserve_lp0 :1;	/* never has lp0	*/
-	unsigned int		reserve_lp1 :1;	/* never has lp1	*/
-	unsigned int		reserve_lp2 :1;	/* never has lp2	*/
-	unsigned int		soft_reboot :1;	/* soft reboot		*/
-	void			(*fixup)(struct machine_desc *,
-					 struct tag *, char **,
-					 struct meminfo *);
-	void			(*map_io)(void);/* IO mapping function	*/
-	void			(*init_irq)(void);
-	struct sys_timer	*timer;		/* system tick timer	*/
-	void			(*init_machine)(void);
-};
-
-/*
- * Set of macros to define architecture features.  This is built into
- * a table by the linker.
- */
-#define MACHINE_START(_type,_name)			\
-static const struct machine_desc __mach_desc_##_type	\
- __used							\
- __attribute__((__section__(".arch.info.init"))) = {	\
-	.nr		= MACH_TYPE_##_type,		\
-	.name		= _name,
-
-#define MACHINE_END				\
-};
-
-#endif
diff --git a/include/asm-arm/mach/dma.h b/include/asm-arm/mach/dma.h
deleted file mode 100644
index e7c4a20aad53..000000000000
--- a/include/asm-arm/mach/dma.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/dma.h
- *
- *  Copyright (C) 1998-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This header file describes the interface between the generic DMA handler
- *  (dma.c) and the architecture-specific DMA backends (dma-*.c)
- */
-
-struct dma_struct;
-typedef struct dma_struct dma_t;
-
-struct dma_ops {
-	int	(*request)(dmach_t, dma_t *);		/* optional */
-	void	(*free)(dmach_t, dma_t *);		/* optional */
-	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
-	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
-	int	(*residue)(dmach_t, dma_t *);		/* optional */
-	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
-	char	*type;
-};
-
-struct dma_struct {
-	void		*addr;		/* single DMA address		*/
-	unsigned long	count;		/* single DMA size		*/
-	struct scatterlist buf;		/* single DMA			*/
-	int		sgcount;	/* number of DMA SG		*/
-	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
-
-	unsigned int	active:1;	/* Transfer active		*/
-	unsigned int	invalid:1;	/* Address/Count changed	*/
-
-	dmamode_t	dma_mode;	/* DMA mode			*/
-	int		speed;		/* DMA speed			*/
-
-	unsigned int	lock;		/* Device is allocated		*/
-	const char	*device_id;	/* Device name			*/
-
-	unsigned int	dma_base;	/* Controller base address	*/
-	int		dma_irq;	/* Controller IRQ		*/
-	struct scatterlist cur_sg;	/* Current controller buffer	*/
-	unsigned int	state;
-
-	struct dma_ops	*d_ops;
-};
-
-/* Prototype: void arch_dma_init(dma)
- * Purpose  : Initialise architecture specific DMA
- * Params   : dma - pointer to array of DMA structures
- */
-extern void arch_dma_init(dma_t *dma);
-
-extern void isa_init_dma(dma_t *dma);
diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h
deleted file mode 100644
index 05b029ef6371..000000000000
--- a/include/asm-arm/mach/flash.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/flash.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_MACH_FLASH_H
-#define ASMARM_MACH_FLASH_H
-
-struct mtd_partition;
-struct mtd_info;
-
-/*
- * map_name:	the map probe function name
- * name:	flash device name (eg, as used with mtdparts=)
- * width:	width of mapped device
- * init:	method called at driver/device initialisation
- * exit:	method called at driver/device removal
- * set_vpp:	method called to enable or disable VPP
- * mmcontrol:	method called to enable or disable Sync. Burst Read in OneNAND
- * parts:	optional array of mtd_partitions for static partitioning
- * nr_parts:	number of mtd_partitions for static partitoning
- */
-struct flash_platform_data {
-	const char	*map_name;
-	const char	*name;
-	unsigned int	width;
-	int		(*init)(void);
-	void		(*exit)(void);
-	void		(*set_vpp)(int on);
-	void		(*mmcontrol)(struct mtd_info *mtd, int sync_read);
-	struct mtd_partition *parts;
-	unsigned int	nr_parts;
-};
-
-#endif
diff --git a/include/asm-arm/mach/irda.h b/include/asm-arm/mach/irda.h
deleted file mode 100644
index 58984d9c0b0b..000000000000
--- a/include/asm-arm/mach/irda.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/irda.h
- *
- *  Copyright (C) 2004 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_IRDA_H
-#define __ASM_ARM_MACH_IRDA_H
-
-struct irda_platform_data {
-	int (*startup)(struct device *);
-	void (*shutdown)(struct device *);
-	int (*set_power)(struct device *, unsigned int state);
-	void (*set_speed)(struct device *, unsigned int speed);
-};
-
-#endif
diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h
deleted file mode 100644
index eb0bfba6570d..000000000000
--- a/include/asm-arm/mach/irq.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/irq.h
- *
- *  Copyright (C) 1995-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_IRQ_H
-#define __ASM_ARM_MACH_IRQ_H
-
-#include <linux/irq.h>
-
-struct seq_file;
-
-/*
- * This is internal.  Do not use it.
- */
-extern void (*init_arch_irq)(void);
-extern void init_FIQ(void);
-extern int show_fiq_list(struct seq_file *, void *);
-
-/*
- * Obsolete inline function for calling irq descriptor handlers.
- */
-static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
-{
-	desc->handle_irq(irq, desc);
-}
-
-void set_irq_flags(unsigned int irq, unsigned int flags);
-
-#define IRQF_VALID	(1 << 0)
-#define IRQF_PROBE	(1 << 1)
-#define IRQF_NOAUTOEN	(1 << 2)
-
-/*
- * This is for easy migration, but should be changed in the source
- */
-#define do_bad_IRQ(irq,desc)				\
-do {							\
-	spin_lock(&desc->lock);				\
-	handle_bad_irq(irq, desc);			\
-	spin_unlock(&desc->lock);			\
-} while(0)
-
-extern unsigned long irq_err_count;
-static inline void ack_bad_irq(int irq)
-{
-	irq_err_count++;
-}
-
-#endif
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
deleted file mode 100644
index 7ef3c8390180..000000000000
--- a/include/asm-arm/mach/map.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/include/asm-arm/map.h
- *
- *  Copyright (C) 1999-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Page table mapping constructs and function prototypes
- */
-#include <asm/io.h>
-
-struct map_desc {
-	unsigned long virtual;
-	unsigned long pfn;
-	unsigned long length;
-	unsigned int type;
-};
-
-/* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN		4
-#define MT_MINICLEAN		5
-#define MT_LOW_VECTORS		6
-#define MT_HIGH_VECTORS		7
-#define MT_MEMORY		8
-#define MT_ROM			9
-
-#define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
-#define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
-
-#ifdef CONFIG_MMU
-extern void iotable_init(struct map_desc *, int);
-#else
-#define iotable_init(map,num)	do { } while (0)
-#endif
diff --git a/include/asm-arm/mach/mmc.h b/include/asm-arm/mach/mmc.h
deleted file mode 100644
index eb91145c00c4..000000000000
--- a/include/asm-arm/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-};
-
-#endif
diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h
deleted file mode 100644
index 9d4f6b5ea419..000000000000
--- a/include/asm-arm/mach/pci.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/pci.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct pci_sys_data;
-struct pci_bus;
-
-struct hw_pci {
-	struct list_head buses;
-	int		nr_controllers;
-	int		(*setup)(int nr, struct pci_sys_data *);
-	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
-	void		(*preinit)(void);
-	void		(*postinit)(void);
-	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
-	int		(*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
-};
-
-/*
- * Per-controller structure
- */
-struct pci_sys_data {
-	struct list_head node;
-	int		busnr;		/* primary bus number			*/
-	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
-	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
-	struct pci_bus	*bus;		/* PCI bus				*/
-	struct resource *resource[3];	/* Primary PCI bus resources		*/
-					/* Bridge swizzling			*/
-	u8		(*swizzle)(struct pci_dev *, u8 *);
-					/* IRQ mapping				*/
-	int		(*map_irq)(struct pci_dev *, u8, u8);
-	struct hw_pci	*hw;
-};
-
-/*
- * This is the standard PCI-PCI bridge swizzling algorithm.
- */
-u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp);
-
-/*
- * Call this with your hw_pci struct to initialise the PCI system.
- */
-void pci_common_init(struct hw_pci *);
-
-/*
- * PCI controllers
- */
-extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
-extern void iop3xx_pci_preinit(void);
-extern void iop3xx_pci_preinit_cond(void);
-
-extern int dc21285_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
-extern void dc21285_preinit(void);
-extern void dc21285_postinit(void);
-
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
-extern int pci_v3_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
-extern void pci_v3_preinit(void);
-extern void pci_v3_postinit(void);
diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h
deleted file mode 100644
index 55b317a89061..000000000000
--- a/include/asm-arm/mach/serial_at91.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/serial_at91.h
- *
- *  Based on serial_sa1100.h  by Nicolas Pitre
- *
- *  Copyright (C) 2002 ATMEL Rousset
- *
- *  Low level machine dependent UART functions.
- */
-
-struct uart_port;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct atmel_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*enable_ms)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-	int	(*open)(struct uart_port *);
-	void	(*close)(struct uart_port *);
-};
-
-#if defined(CONFIG_SERIAL_ATMEL)
-void atmel_register_uart_fns(struct atmel_port_fns *fns);
-#else
-#define atmel_register_uart_fns(fns) do { } while (0)
-#endif
-
-
diff --git a/include/asm-arm/mach/serial_sa1100.h b/include/asm-arm/mach/serial_sa1100.h
deleted file mode 100644
index 20c22bb218d9..000000000000
--- a/include/asm-arm/mach/serial_sa1100.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/serial_sa1100.h
- *
- *  Author: Nicolas Pitre
- *
- * Moved to include/asm-arm/mach and changed lots, Russell King
- *
- * Low level machine dependent UART functions.
- */
-
-struct uart_port;
-struct uart_info;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct sa1100_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-};
-
-#ifdef CONFIG_SERIAL_SA1100
-void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
-void sa1100_register_uart(int idx, int port);
-#else
-#define sa1100_register_uart_fns(fns) do { } while (0)
-#define sa1100_register_uart(idx,port) do { } while (0)
-#endif
diff --git a/include/asm-arm/mach/sharpsl_param.h b/include/asm-arm/mach/sharpsl_param.h
deleted file mode 100644
index 7a24ecf04220..000000000000
--- a/include/asm-arm/mach/sharpsl_param.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Hardware parameter area specific to Sharp SL series devices
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-struct sharpsl_param_info {
-  unsigned int comadj_keyword;
-  unsigned int comadj;
-
-  unsigned int uuid_keyword;
-  unsigned char uuid[16];
-
-  unsigned int touch_keyword;
-  unsigned int touch_xp;
-  unsigned int touch_yp;
-  unsigned int touch_xd;
-  unsigned int touch_yd;
-
-  unsigned int adadj_keyword;
-  unsigned int adadj;
-
-  unsigned int phad_keyword;
-  unsigned int phadadj;
-} __attribute__((packed));
-
-
-extern struct sharpsl_param_info sharpsl_param;
-extern void sharpsl_save_param(void);
-
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
deleted file mode 100644
index 2fd36ea0130d..000000000000
--- a/include/asm-arm/mach/time.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/asm-arm/mach/time.h
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_TIME_H
-#define __ASM_ARM_MACH_TIME_H
-
-#include <linux/sysdev.h>
-
-/*
- * This is our kernel timer structure.
- *
- * - init
- *   Initialise the kernels jiffy timer source, claim interrupt
- *   using setup_irq.  This is called early on during initialisation
- *   while interrupts are still disabled on the local CPU.
- * - suspend
- *   Suspend the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled, after all normal devices
- *   have been suspended.  If no action is required, set this to
- *   NULL.
- * - resume
- *   Resume the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled before any normal devices
- *   are resumed.  If no action is required, set this to NULL.
- * - offset
- *   Return the timer offset in microseconds since the last timer
- *   interrupt.  Note: this must take account of any unprocessed
- *   timer interrupt which may be pending.
- */
-struct sys_timer {
-	struct sys_device	dev;
-	void			(*init)(void);
-	void			(*suspend)(void);
-	void			(*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
-	unsigned long		(*offset)(void);
-#endif
-};
-
-extern struct sys_timer *system_timer;
-extern void timer_tick(void);
-
-/*
- * Kernel time keeping support.
- */
-struct timespec;
-extern int (*set_rtc)(void);
-extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
-extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
-
-#endif
diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
deleted file mode 100644
index f9f3606986c2..000000000000
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/mach/udc_pxa2xx.h
- *
- * This supports machine-specific differences in how the PXA2xx
- * USB Device Controller (UDC) is wired.
- *
- * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
- * linux/arch/mach-ixp4xx/<machine>.c and used in
- * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
- */
-
-struct pxa2xx_udc_mach_info {
-        int  (*udc_is_connected)(void);		/* do we see host? */
-        void (*udc_command)(int cmd);
-#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
-#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
-
-	/* Boards following the design guidelines in the developer's manual,
-	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
-	 * VBUS IRQ and omit the methods above.  Store the GPIO number
-	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
-	 * Note that sometimes the signals go through inverters...
-	 */
-	bool	gpio_vbus_inverted;
-	u16	gpio_vbus;			/* high == vbus present */
-	u16	gpio_pullup;			/* high == pullup activated */
-};
-
diff --git a/include/asm-arm/mc146818rtc.h b/include/asm-arm/mc146818rtc.h
deleted file mode 100644
index 7b81e0c42543..000000000000
--- a/include/asm-arm/mc146818rtc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#include <asm/arch/irqs.h>
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
deleted file mode 100644
index 9ba4d7136e6b..000000000000
--- a/include/asm-arm/memory.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- *  linux/include/asm-arm/memory.h
- *
- *  Copyright (C) 2000-2002 Russell King
- *  modification for nommu, Hyok S. Choi, 2004
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note: this file should not be included by non-asm/.h files
- */
-#ifndef __ASM_ARM_MEMORY_H
-#define __ASM_ARM_MEMORY_H
-
-/*
- * Allow for constants defined here to be used from assembly code
- * by prepending the UL suffix only with actual C code compilation.
- */
-#ifndef __ASSEMBLY__
-#define UL(x) (x##UL)
-#else
-#define UL(x) (x)
-#endif
-
-#include <linux/compiler.h>
-#include <asm/arch/memory.h>
-#include <asm/sizes.h>
-
-#ifdef CONFIG_MMU
-
-#ifndef TASK_SIZE
-/*
- * TASK_SIZE - the maximum size of a user space task.
- * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
- */
-#define TASK_SIZE		UL(0xbf000000)
-#define TASK_UNMAPPED_BASE	UL(0x40000000)
-#endif
-
-/*
- * The maximum size of a 26-bit user space task.
- */
-#define TASK_SIZE_26		UL(0x04000000)
-
-/*
- * Page offset: 3GB
- */
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		UL(0xc0000000)
-#endif
-
-/*
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 32MB of the kernel text.
- */
-#define MODULE_END		(PAGE_OFFSET)
-#define MODULE_START		(MODULE_END - 16*1048576)
-
-#if TASK_SIZE > MODULE_START
-#error Top of user space clashes with start of module space
-#endif
-
-/*
- * The XIP kernel gets mapped at the bottom of the module vm area.
- * Since we use sections to map it, this macro replaces the physical address
- * with its virtual address while keeping offset from the base section.
- */
-#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
-
-/*
- * Allow 16MB-aligned ioremap pages
- */
-#define IOREMAP_MAX_ORDER	24
-
-#else /* CONFIG_MMU */
-
-/*
- * The limitation of user task size can grow up to the end of free ram region.
- * It is difficult to define and perhaps will never meet the original meaning
- * of this define that was meant to.
- * Fortunately, there is no reference for this in noMMU mode, for now.
- */
-#ifndef TASK_SIZE
-#define TASK_SIZE		(CONFIG_DRAM_SIZE)
-#endif
-
-#ifndef TASK_UNMAPPED_BASE
-#define TASK_UNMAPPED_BASE	UL(0x00000000)
-#endif
-
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET 		(CONFIG_DRAM_BASE)
-#endif
-
-#ifndef END_MEM
-#define END_MEM     		(CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
-#endif
-
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		(PHYS_OFFSET)
-#endif
-
-/*
- * The module can be at any place in ram in nommu mode.
- */
-#define MODULE_END		(END_MEM)
-#define MODULE_START		(PHYS_OFFSET)
-
-#endif /* !CONFIG_MMU */
-
-/*
- * Size of DMA-consistent memory region.  Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-
-/*
- * Convert a physical address to a Page Frame Number and back
- */
-#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
-#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
-
-#ifndef __ASSEMBLY__
-
-/*
- * The DMA mask corresponding to the maximum bus address allocatable
- * using GFP_DMA.  The default here places no restriction on DMA
- * allocations.  This must be the smallest DMA mask in the system,
- * so a successful GFP_DMA allocation will always satisfy this.
- */
-#ifndef ISA_DMA_THRESHOLD
-#define ISA_DMA_THRESHOLD	(0xffffffffULL)
-#endif
-
-#ifndef arch_adjust_zones
-#define arch_adjust_zones(node,size,holes) do { } while (0)
-#endif
-
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view.  We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
-
-/*
- * These are *only* valid on the kernel direct mapped RAM memory.
- * Note: Drivers should NOT use these.  They are the wrong
- * translation for translating DMA addresses.  Use the driver
- * DMA support - see dma-mapping.h.
- */
-static inline unsigned long virt_to_phys(void *x)
-{
-	return __virt_to_phys((unsigned long)(x));
-}
-
-static inline void *phys_to_virt(unsigned long x)
-{
-	return (void *)(__phys_to_virt((unsigned long)(x)));
-}
-
-/*
- * Drivers should NOT use these either.
- */
-#define __pa(x)			__virt_to_phys((unsigned long)(x))
-#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-
-/*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory.  Use of these is *deprecated* (and that doesn't mean
- * use the __ prefixed forms instead.)  See dma-mapping.h.
- */
-static inline __deprecated unsigned long virt_to_bus(void *x)
-{
-	return __virt_to_bus((unsigned long)x);
-}
-
-static inline __deprecated void *bus_to_virt(unsigned long x)
-{
-	return (void *)__bus_to_virt(x);
-}
-
-/*
- * Conversion between a struct page and a physical address.
- *
- * Note: when converting an unknown physical address to a
- * struct page, the resulting pointer must be validated
- * using VALID_PAGE().  It must return an invalid struct page
- * for any physical address not corresponding to a system
- * RAM address.
- *
- *  page_to_pfn(page)	convert a struct page * to a PFN number
- *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *  pfn_valid(pfn)	indicates whether a PFN number is valid
- *
- *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
- *  virt_addr_valid(k)	indicates whether a virtual address is valid
- */
-#ifndef CONFIG_DISCONTIGMEM
-
-#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
-
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
-
-#define PHYS_TO_NID(addr)	(0)
-
-#else /* CONFIG_DISCONTIGMEM */
-
-/*
- * This is more complex.  We have a set of mem_map arrays spread
- * around in memory.
- */
-#include <linux/numa.h>
-
-#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
-#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-
-#define pfn_valid(pfn)						\
-	({							\
-		unsigned int nid = PFN_TO_NID(pfn);		\
-		int valid = nid < MAX_NUMNODES;			\
-		if (valid) {					\
-			pg_data_t *node = NODE_DATA(nid);	\
-			valid = (pfn - node->node_start_pfn) <	\
-				node->node_spanned_pages;	\
-		}						\
-		valid;						\
-	})
-
-#define virt_to_page(kaddr)					\
-	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
-
-/*
- * Common discontigmem stuff.
- *  PHYS_TO_NID is used by the ARM kernel/setup.c
- */
-#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-#ifdef NODE_MEM_SIZE_BITS
-#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
-	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
-	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
-	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
-
-#endif /* NODE_MEM_SIZE_BITS */
-
-#endif /* !CONFIG_DISCONTIGMEM */
-
-/*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * Optional device DMA address remapping. Do _not_ use directly!
- * We should really eliminate virt_to_bus() here - it's deprecated.
- */
-#ifndef __arch_page_to_dma
-#define page_to_dma(dev, page)		((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
-#define dma_to_virt(dev, addr)		((void *)__bus_to_virt(addr))
-#define virt_to_dma(dev, addr)		((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
-#else
-#define page_to_dma(dev, page)		(__arch_page_to_dma(dev, page))
-#define dma_to_virt(dev, addr)		(__arch_dma_to_virt(dev, addr))
-#define virt_to_dma(dev, addr)		(__arch_virt_to_dma(dev, addr))
-#endif
-
-/*
- * Optional coherency support.  Currently used only by selected
- * Intel XSC3-based systems.
- */
-#ifndef arch_is_coherent
-#define arch_is_coherent()		0
-#endif
-
-#endif
-
-#include <asm-generic/memory_model.h>
-
-#endif
diff --git a/include/asm-arm/mman.h b/include/asm-arm/mman.h
deleted file mode 100644
index 54570d2e95b7..000000000000
--- a/include/asm-arm/mman.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ARM_MMAN_H__
-#define __ARM_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ARM_MMAN_H__ */
diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h
deleted file mode 100644
index 53099d4ee421..000000000000
--- a/include/asm-arm/mmu.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __ARM_MMU_H
-#define __ARM_MMU_H
-
-#ifdef CONFIG_MMU
-
-typedef struct {
-#ifdef CONFIG_CPU_HAS_ASID
-	unsigned int id;
-#endif
-	unsigned int kvm_seq;
-} mm_context_t;
-
-#ifdef CONFIG_CPU_HAS_ASID
-#define ASID(mm)	((mm)->context.id & 255)
-#else
-#define ASID(mm)	(0)
-#endif
-
-#else
-
-/*
- * From nommu.h:
- *  Copyright (C) 2002, David McCullough <davidm@snapgear.com>
- *  modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
- */
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-
-#endif
-
-#endif
diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h
deleted file mode 100644
index 91b9dfdfed52..000000000000
--- a/include/asm-arm/mmu_context.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- *  linux/include/asm-arm/mmu_context.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996	RMK	Created
- */
-#ifndef __ASM_ARM_MMU_CONTEXT_H
-#define __ASM_ARM_MMU_CONTEXT_H
-
-#include <linux/compiler.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
-
-void __check_kvm_seq(struct mm_struct *mm);
-
-#ifdef CONFIG_CPU_HAS_ASID
-
-/*
- * On ARMv6, we have the following structure in the Context ID:
- *
- * 31                         7          0
- * +-------------------------+-----------+
- * |      process ID         |   ASID    |
- * +-------------------------+-----------+
- * |              context ID             |
- * +-------------------------------------+
- *
- * The ASID is used to tag entries in the CPU caches and TLBs.
- * The context ID is used by debuggers and trace logic, and
- * should be unique within all running processes.
- */
-#define ASID_BITS		8
-#define ASID_MASK		((~0) << ASID_BITS)
-#define ASID_FIRST_VERSION	(1 << ASID_BITS)
-
-extern unsigned int cpu_last_asid;
-
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void __new_context(struct mm_struct *mm);
-
-static inline void check_context(struct mm_struct *mm)
-{
-	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
-		__new_context(mm);
-
-	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
-		__check_kvm_seq(mm);
-}
-
-#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
-
-#else
-
-static inline void check_context(struct mm_struct *mm)
-{
-	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
-		__check_kvm_seq(mm);
-}
-
-#define init_new_context(tsk,mm)	0
-
-#endif
-
-#define destroy_context(mm)		do { } while(0)
-
-/*
- * This is called when "tsk" is about to enter lazy TLB mode.
- *
- * mm:  describes the currently active mm context
- * tsk: task which is entering lazy tlb
- * cpu: cpu number which is entering lazy tlb
- *
- * tsk->mm will be NULL
- */
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * This is the actual mm switch as far as the scheduler
- * is concerned.  No registers are touched.  We avoid
- * calling the CPU specific function when the mm hasn't
- * actually changed.
- */
-static inline void
-switch_mm(struct mm_struct *prev, struct mm_struct *next,
-	  struct task_struct *tsk)
-{
-#ifdef CONFIG_MMU
-	unsigned int cpu = smp_processor_id();
-
-#ifdef CONFIG_SMP
-	/* check for possible thread migration */
-	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
-		__flush_icache_all();
-#endif
-	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
-		check_context(next);
-		cpu_switch_mm(next->pgd, next);
-		if (cache_is_vivt())
-			cpu_clear(cpu, prev->cpu_vm_mask);
-	}
-#endif
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
-
-#endif
diff --git a/include/asm-arm/mmzone.h b/include/asm-arm/mmzone.h
deleted file mode 100644
index b87de151f0a4..000000000000
--- a/include/asm-arm/mmzone.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/mmzone.h
- *
- *  1999-12-29	Nicolas Pitre		Created
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-/*
- * Currently defined in arch/arm/mm/discontig.c
- */
-extern pg_data_t discontig_node_data[];
-
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(&discontig_node_data[nid])
-
-/*
- * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
- */
-#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
-
-#include <asm/arch/memory.h>
-
-#endif
diff --git a/include/asm-arm/module.h b/include/asm-arm/module.h
deleted file mode 100644
index 24b168dc31a3..000000000000
--- a/include/asm-arm/module.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_ARM_MODULE_H
-#define _ASM_ARM_MODULE_H
-
-struct mod_arch_specific
-{
-	int foo;
-};
-
-#define Elf_Shdr	Elf32_Shdr
-#define Elf_Sym		Elf32_Sym
-#define Elf_Ehdr	Elf32_Ehdr
-
-/*
- * Include the ARM architecture version.
- */
-#define MODULE_ARCH_VERMAGIC	"ARMv" __stringify(__LINUX_ARM_ARCH__) " "
-
-#endif /* _ASM_ARM_MODULE_H */
diff --git a/include/asm-arm/msgbuf.h b/include/asm-arm/msgbuf.h
deleted file mode 100644
index 33b35b946eaa..000000000000
--- a/include/asm-arm/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ASMARM_MSGBUF_H
-#define _ASMARM_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _ASMARM_MSGBUF_H */
diff --git a/include/asm-arm/mtd-xip.h b/include/asm-arm/mtd-xip.h
deleted file mode 100644
index 9eb127cc7db2..000000000000
--- a/include/asm-arm/mtd-xip.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
- */
-
-#ifndef __ARM_MTD_XIP_H__
-#define __ARM_MTD_XIP_H__
-
-#include <asm/hardware.h>
-#include <asm/arch/mtd-xip.h>
-
-/* fill instruction prefetch */
-#define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
-
-#endif /* __ARM_MTD_XIP_H__ */
diff --git a/include/asm-arm/mutex.h b/include/asm-arm/mutex.h
deleted file mode 100644
index 020bd98710a1..000000000000
--- a/include/asm-arm/mutex.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/asm-arm/mutex.h
- *
- * ARM optimized mutex locking primitives
- *
- * Please look into asm-generic/mutex-xchg.h for a formal definition.
- */
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
-
-#if __LINUX_ARM_ARCH__ < 6
-/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */
-# include <asm-generic/mutex-xchg.h>
-#else
-
-/*
- * Attempting to lock a mutex on ARMv6+ can be done with a bastardized
- * atomic decrement (it is not a reliable atomic decrement but it satisfies
- * the defined semantics for our purpose, while being smaller and faster
- * than a real atomic decrement or atomic swap.  The idea is to attempt
- * decrementing the lock value only once.  If once decremented it isn't zero,
- * or if its store-back fails due to a dispute on the exclusive store, we
- * simply bail out immediately through the slow path where the lock will be
- * reattempted until it succeeds.
- */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res;
-
-	__asm__ (
-
-		"ldrex	%0, [%2]	\n\t"
-		"sub	%0, %0, #1	\n\t"
-		"strex	%1, %0, [%2]	"
-
-		: "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__res |= __ex_flag;
-	if (unlikely(__res != 0))
-		fail_fn(count);
-}
-
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res;
-
-	__asm__ (
-
-		"ldrex	%0, [%2]	\n\t"
-		"sub	%0, %0, #1	\n\t"
-		"strex	%1, %0, [%2]	"
-
-		: "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__res |= __ex_flag;
-	if (unlikely(__res != 0))
-		__res = fail_fn(count);
-	return __res;
-}
-
-/*
- * Same trick is used for the unlock fast path. However the original value,
- * rather than the result, is used to test for success in order to have
- * better generated assembly.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res, __orig;
-
-	__asm__ (
-
-		"ldrex	%0, [%3]	\n\t"
-		"add	%1, %0, #1	\n\t"
-		"strex	%2, %1, [%3]	"
-
-		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&(count)->counter)
-		: "cc","memory" );
-
-	__orig |= __ex_flag;
-	if (unlikely(__orig != 0))
-		fail_fn(count);
-}
-
-/*
- * If the unlock was done on a contended lock, or if the unlock simply fails
- * then the mutex remains locked.
- */
-#define __mutex_slowpath_needs_to_unlock()	1
-
-/*
- * For __mutex_fastpath_trylock we use another construct which could be
- * described as a "single value cmpxchg".
- *
- * This provides the needed trylock semantics like cmpxchg would, but it is
- * lighter and less generic than a true cmpxchg implementation.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	int __ex_flag, __res, __orig;
-
-	__asm__ (
-
-		"1: ldrex	%0, [%3]	\n\t"
-		"subs		%1, %0, #1	\n\t"
-		"strexeq	%2, %1, [%3]	\n\t"
-		"movlt		%0, #0		\n\t"
-		"cmpeq		%2, #0		\n\t"
-		"bgt		1b		"
-
-		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
-		: "r" (&count->counter)
-		: "cc", "memory" );
-
-	return __orig;
-}
-
-#endif
-#endif
diff --git a/include/asm-arm/namei.h b/include/asm-arm/namei.h
deleted file mode 100644
index a402d3b9d0f7..000000000000
--- a/include/asm-arm/namei.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* 
- * linux/include/asm-arm/namei.h
- *
- * Routines to handle famous /usr/gnemul
- * Derived from the Sparc version of this file
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASMARM_NAMEI_H
-#define __ASMARM_NAMEI_H
-
-#define ARM_BSD_EMUL "usr/gnemul/bsd/"
-
-static inline char *__emul_prefix(void)
-{
-	switch (current->personality) {
-	case PER_BSD:
-		return ARM_BSD_EMUL;
-	default:
-		return NULL;
-	}
-}
-
-#endif /* __ASMARM_NAMEI_H */
diff --git a/include/asm-arm/nwflash.h b/include/asm-arm/nwflash.h
deleted file mode 100644
index 04e5a557a884..000000000000
--- a/include/asm-arm/nwflash.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _FLASH_H
-#define _FLASH_H
-
-#define FLASH_MINOR		 160	/* MAJOR is 10 - miscdevice */
-#define CMD_WRITE_DISABLE	 0
-#define CMD_WRITE_ENABLE	 0x28
-#define CMD_WRITE_BASE64K_ENABLE 0x47
-
-#endif /* _FLASH_H */
diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h
deleted file mode 100644
index a1bcad060480..000000000000
--- a/include/asm-arm/page-nommu.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/include/asm-arm/page-nommu.h
- *
- *  Copyright (C) 2004 Hyok S. Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PAGE_NOMMU_H
-#define _ASMARM_PAGE_NOMMU_H
-
-#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13
-#define KTHREAD_SIZE (8192)
-#else
-#define KTHREAD_SIZE PAGE_SIZE
-#endif
- 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t[2];
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)	((x)[0])
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgprot(x)     (x)
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
deleted file mode 100644
index 8e05bdb5f12f..000000000000
--- a/include/asm-arm/page.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- *  linux/include/asm-arm/page.h
- *
- *  Copyright (C) 1995-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PAGE_H
-#define _ASMARM_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
-#define PAGE_MASK		(~(PAGE_SIZE-1))
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-#ifndef __ASSEMBLY__
-
-#ifndef CONFIG_MMU
-
-#include "page-nommu.h"
-
-#else
-
-#include <asm/glue.h>
-
-/*
- *	User Space Model
- *	================
- *
- *	This section selects the correct set of functions for dealing with
- *	page-based copying and clearing for user space for the particular
- *	processor(s) we're building for.
- *
- *	We have the following to choose from:
- *	  v3		- ARMv3
- *	  v4wt		- ARMv4 with writethrough cache, without minicache
- *	  v4wb		- ARMv4 with writeback cache, without minicache
- *	  v4_mc		- ARMv4 with minicache
- *	  xscale	- Xscale
- *	  xsc3		- XScalev3
- */
-#undef _USER
-#undef MULTI_USER
-
-#ifdef CONFIG_CPU_COPY_V3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V4WT
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4wt
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V4WB
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4wb
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_FEROCEON
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER feroceon
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER xscale_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER xsc3_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V6
-# define MULTI_USER 1
-#endif
-
-#if !defined(_USER) && !defined(MULTI_USER)
-#error Unknown user operations model
-#endif
-
-struct cpu_user_fns {
-	void (*cpu_clear_user_page)(void *p, unsigned long user);
-	void (*cpu_copy_user_page)(void *to, const void *from,
-				   unsigned long user);
-};
-
-#ifdef MULTI_USER
-extern struct cpu_user_fns cpu_user;
-
-#define __cpu_clear_user_page	cpu_user.cpu_clear_user_page
-#define __cpu_copy_user_page	cpu_user.cpu_copy_user_page
-
-#else
-
-#define __cpu_clear_user_page	__glue(_USER,_clear_user_page)
-#define __cpu_copy_user_page	__glue(_USER,_copy_user_page)
-
-extern void __cpu_clear_user_page(void *p, unsigned long user);
-extern void __cpu_copy_user_page(void *to, const void *from,
-				 unsigned long user);
-#endif
-
-#define clear_user_page(addr,vaddr,pg)	 __cpu_clear_user_page(addr, vaddr)
-#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
-
-#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
-extern void copy_page(void *to, const void *from);
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd[2]; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x)      ((x).pte)
-#define pmd_val(x)      ((x).pmd)
-#define pgd_val(x)	((x).pgd[0])
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t[2];
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)	((x)[0])
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-#endif /* CONFIG_MMU */
-
-typedef struct page *pgtable_t;
-
-#include <asm/memory.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
-#include <asm-generic/page.h>
-
-#endif
diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h
deleted file mode 100644
index 15806468ba72..000000000000
--- a/include/asm-arm/param.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/include/asm-arm/param.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PARAM_H
-#define __ASM_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#else
-# define HZ		100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP         (-1)
-#endif
-
-/* max length of hostname */
-#define MAXHOSTNAMELEN  64
-
-#endif
-
diff --git a/include/asm-arm/parport.h b/include/asm-arm/parport.h
deleted file mode 100644
index f2f90c76ddd1..000000000000
--- a/include/asm-arm/parport.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/parport.h: ARM-specific parport initialisation
- *
- *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef __ASMARM_PARPORT_H
-#define __ASMARM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
deleted file mode 100644
index 75feb1574a69..000000000000
--- a/include/asm-arm/pci.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef ASMARM_PCI_H
-#define ASMARM_PCI_H
-
-#ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-
-#include <asm/hardware.h> /* for PCIBIOS_MIN_* */
-
-#define pcibios_scan_all_fns(a, b)	0
-
-#ifdef CONFIG_PCI_HOST_ITE8152
-/* ITE bridge requires setting latency timer to avoid early bus access
-   termination by PIC bus mater devices
-*/
-extern void pcibios_set_master(struct pci_dev *dev);
-#else
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-#endif
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/*
- * The PCI address space does equal the physical memory address space.
- * The networking and block device layers use this boolean for bounce
- * buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS     (0)
-
-/*
- * Whether pci_unmap_{single,page} is a nop depends upon the
- * configuration.
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-                               enum pci_mmap_state mmap_state, int write_combine);
-
-extern void
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			 struct resource *res);
-
-extern void
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
-#endif /* __KERNEL__ */
- 
-#endif
diff --git a/include/asm-arm/percpu.h b/include/asm-arm/percpu.h
deleted file mode 100644
index b4e32d8ec072..000000000000
--- a/include/asm-arm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARM_PERCPU
-#define __ARM_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif
diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h
deleted file mode 100644
index 163b0305dd76..000000000000
--- a/include/asm-arm/pgalloc.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  linux/include/asm-arm/pgalloc.h
- *
- *  Copyright (C) 2000-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGALLOC_H
-#define _ASMARM_PGALLOC_H
-
-#include <asm/domain.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#define check_pgt_cache()		do { } while (0)
-
-#ifdef CONFIG_MMU
-
-#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
-#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
-
-/*
- * Since we have only two-level page tables, these are trivial
- */
-#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
-#define pmd_free(mm, pmd)		do { } while (0)
-#define pgd_populate(mm,pmd,pte)	BUG()
-
-extern pgd_t *get_pgd_slow(struct mm_struct *mm);
-extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
-
-#define pgd_alloc(mm)			get_pgd_slow(mm)
-#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
-
-/*
- * Allocate one PTE table.
- *
- * This actually allocates two hardware PTE tables, but we wrap this up
- * into one table thus:
- *
- *  +------------+
- *  |  h/w pt 0  |
- *  +------------+
- *  |  h/w pt 1  |
- *  +------------+
- *  | Linux pt 0 |
- *  +------------+
- *  | Linux pt 1 |
- *  +------------+
- */
-static inline pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
-{
-	pte_t *pte;
-
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	if (pte) {
-		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
-		pte += PTRS_PER_PTE;
-	}
-
-	return pte;
-}
-
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	struct page *pte;
-
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
-	if (pte) {
-		void *page = page_address(pte);
-		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
-		pgtable_page_ctor(pte);
-	}
-
-	return pte;
-}
-
-/*
- * Free one PTE table.
- */
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	if (pte) {
-		pte -= PTRS_PER_PTE;
-		free_page((unsigned long)pte);
-	}
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	__free_page(pte);
-}
-
-static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
-{
-	pmdp[0] = __pmd(pmdval);
-	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
-	flush_pmd_entry(pmdp);
-}
-
-/*
- * Populate the pmdp entry with a pointer to the pte.  This pmd is part
- * of the mm address space.
- *
- * Ensure that we always set both PMD entries.
- */
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
-{
-	unsigned long pte_ptr = (unsigned long)ptep;
-
-	/*
-	 * The pmd must be loaded with the physical
-	 * address of the PTE table
-	 */
-	pte_ptr -= PTRS_PER_PTE * sizeof(void *);
-	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
-}
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
-{
-	__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#endif /* CONFIG_MMU */
-
-#endif
diff --git a/include/asm-arm/pgtable-hwdef.h b/include/asm-arm/pgtable-hwdef.h
deleted file mode 100644
index f3b5120c99fe..000000000000
--- a/include/asm-arm/pgtable-hwdef.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  linux/include/asm-arm/pgtable-hwdef.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_HWDEF_H
-#define _ASMARM_PGTABLE_HWDEF_H
-
-/*
- * Hardware page table definitions.
- *
- * + Level 1 descriptor (PMD)
- *   - common
- */
-#define PMD_TYPE_MASK		(3 << 0)
-#define PMD_TYPE_FAULT		(0 << 0)
-#define PMD_TYPE_TABLE		(1 << 0)
-#define PMD_TYPE_SECT		(2 << 0)
-#define PMD_BIT4		(1 << 4)
-#define PMD_DOMAIN(x)		((x) << 5)
-#define PMD_PROTECTION		(1 << 9)	/* v5 */
-/*
- *   - section
- */
-#define PMD_SECT_BUFFERABLE	(1 << 2)
-#define PMD_SECT_CACHEABLE	(1 << 3)
-#define PMD_SECT_XN		(1 << 4)	/* v6 */
-#define PMD_SECT_AP_WRITE	(1 << 10)
-#define PMD_SECT_AP_READ	(1 << 11)
-#define PMD_SECT_TEX(x)		((x) << 12)	/* v5 */
-#define PMD_SECT_APX		(1 << 15)	/* v6 */
-#define PMD_SECT_S		(1 << 16)	/* v6 */
-#define PMD_SECT_nG		(1 << 17)	/* v6 */
-#define PMD_SECT_SUPER		(1 << 18)	/* v6 */
-
-#define PMD_SECT_UNCACHED	(0)
-#define PMD_SECT_BUFFERED	(PMD_SECT_BUFFERABLE)
-#define PMD_SECT_WT		(PMD_SECT_CACHEABLE)
-#define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
-#define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
-#define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
-#define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
-
-/*
- *   - coarse table (not used)
- */
-
-/*
- * + Level 2 descriptor (PTE)
- *   - common
- */
-#define PTE_TYPE_MASK		(3 << 0)
-#define PTE_TYPE_FAULT		(0 << 0)
-#define PTE_TYPE_LARGE		(1 << 0)
-#define PTE_TYPE_SMALL		(2 << 0)
-#define PTE_TYPE_EXT		(3 << 0)	/* v5 */
-#define PTE_BUFFERABLE		(1 << 2)
-#define PTE_CACHEABLE		(1 << 3)
-
-/*
- *   - extended small page/tiny page
- */
-#define PTE_EXT_XN		(1 << 0)	/* v6 */
-#define PTE_EXT_AP_MASK		(3 << 4)
-#define PTE_EXT_AP0		(1 << 4)
-#define PTE_EXT_AP1		(2 << 4)
-#define PTE_EXT_AP_UNO_SRO	(0 << 4)
-#define PTE_EXT_AP_UNO_SRW	(PTE_EXT_AP0)
-#define PTE_EXT_AP_URO_SRW	(PTE_EXT_AP1)
-#define PTE_EXT_AP_URW_SRW	(PTE_EXT_AP1|PTE_EXT_AP0)
-#define PTE_EXT_TEX(x)		((x) << 6)	/* v5 */
-#define PTE_EXT_APX		(1 << 9)	/* v6 */
-#define PTE_EXT_COHERENT	(1 << 9)	/* XScale3 */
-#define PTE_EXT_SHARED		(1 << 10)	/* v6 */
-#define PTE_EXT_NG		(1 << 11)	/* v6 */
-
-/*
- *   - small page
- */
-#define PTE_SMALL_AP_MASK	(0xff << 4)
-#define PTE_SMALL_AP_UNO_SRO	(0x00 << 4)
-#define PTE_SMALL_AP_UNO_SRW	(0x55 << 4)
-#define PTE_SMALL_AP_URO_SRW	(0xaa << 4)
-#define PTE_SMALL_AP_URW_SRW	(0xff << 4)
-
-#endif
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
deleted file mode 100644
index 386fcc10a973..000000000000
--- a/include/asm-arm/pgtable-nommu.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- *  linux/include/asm-arm/pgtable-nommu.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *  Copyright (C) 2004  Hyok S. Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_NOMMU_H
-#define _ASMARM_PGTABLE_NOMMU_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-/*
- * Trivial page table functions.
- */
-#define pgd_present(pgd)	(1)
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-#define	pmd_offset(a, b)	((void *)0)
-/* FIXME */
-/*
- * PMD_SHIFT determines the size of the area a second-level page table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PGDIR_SHIFT		21
-
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-/* FIXME */
-
-#define PAGE_NONE	__pgprot(0)
-#define PAGE_SHARED	__pgprot(0)
-#define PAGE_COPY	__pgprot(0)
-#define PAGE_READONLY	__pgprot(0)
-#define PAGE_KERNEL	__pgprot(0)
-
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-
-typedef pte_t *pte_addr_t;
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
- * Mark the prot value as uncacheable and unbufferable.
- */
-#define pgprot_noncached(prot)	__pgprot(0)
-#define pgprot_writecombine(prot) __pgprot(0)
-
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init()	do { } while (0)
-#define io_remap_page_range	remap_page_range
-#define io_remap_pfn_range	remap_pfn_range
-
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-#define FIRST_USER_ADDRESS      (0)
-
-#include <asm-generic/pgtable.h>
-
-#else 
-
-/*
- * dummy tlb and user structures.
- */
-#define v3_tlb_fns	(0)
-#define v4_tlb_fns	(0)
-#define v4wb_tlb_fns	(0)
-#define v4wbi_tlb_fns	(0)
-#define v6wbi_tlb_fns	(0)
-#define v7wbi_tlb_fns	(0)
-
-#define v3_user_fns	(0)
-#define v4_user_fns	(0)
-#define v4_mc_user_fns	(0)
-#define v4wb_user_fns	(0)
-#define v4wt_user_fns	(0)
-#define v6_user_fns	(0)
-#define xscale_mc_user_fns (0)
-
-#endif /*__ASSEMBLY__*/
-
-#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
deleted file mode 100644
index 5571c13c3f3b..000000000000
--- a/include/asm-arm/pgtable.h
+++ /dev/null
@@ -1,401 +0,0 @@
-/*
- *  linux/include/asm-arm/pgtable.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_H
-#define _ASMARM_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-#include <asm/proc-fns.h>
-
-#ifndef CONFIG_MMU
-
-#include "pgtable-nommu.h"
-
-#else
-
-#include <asm/memory.h>
-#include <asm/arch/vmalloc.h>
-#include <asm/pgtable-hwdef.h>
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
- */
-#ifndef VMALLOC_START
-#define VMALLOC_OFFSET		(8*1024*1024)
-#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#endif
-
-/*
- * Hardware-wise, we have a two level page table structure, where the first
- * level has 4096 entries, and the second level has 256 entries.  Each entry
- * is one 32-bit word.  Most of the bits in the second level entry are used
- * by hardware, and there aren't any "accessed" and "dirty" bits.
- *
- * Linux on the other hand has a three level page table structure, which can
- * be wrapped to fit a two level page table structure easily - using the PGD
- * and PTE only.  However, Linux also expects one "PTE" table per page, and
- * at least a "dirty" bit.
- *
- * Therefore, we tweak the implementation slightly - we tell Linux that we
- * have 2048 entries in the first level, each of which is 8 bytes (iow, two
- * hardware pointers to the second level.)  The second level contains two
- * hardware PTE tables arranged contiguously, followed by Linux versions
- * which contain the state information Linux needs.  We, therefore, end up
- * with 512 entries in the "PTE" level.
- *
- * This leads to the page tables having the following layout:
- *
- *    pgd             pte
- * |        |
- * +--------+ +0
- * |        |-----> +------------+ +0
- * +- - - - + +4    |  h/w pt 0  |
- * |        |-----> +------------+ +1024
- * +--------+ +8    |  h/w pt 1  |
- * |        |       +------------+ +2048
- * +- - - - +       | Linux pt 0 |
- * |        |       +------------+ +3072
- * +--------+       | Linux pt 1 |
- * |        |       +------------+ +4096
- *
- * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
- * PTE_xxx for definitions of bits appearing in the "h/w pt".
- *
- * PMD_xxx definitions refer to bits in the first level page table.
- *
- * The "dirty" bit is emulated by only granting hardware write permission
- * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
- * means that a write to a clean page will cause a permission fault, and
- * the Linux MM layer will mark the page dirty via handle_pte_fault().
- * For the hardware to notice the permission change, the TLB entry must
- * be flushed, and ptep_set_access_flags() does that for us.
- *
- * The "accessed" or "young" bit is emulated by a similar method; we only
- * allow accesses to the page if the "young" bit is set.  Accesses to the
- * page will cause a fault, and handle_pte_fault() will set the young bit
- * for us as long as the page is marked present in the corresponding Linux
- * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
- * up to date.
- *
- * However, when the "young" bit is cleared, we deny access to the page
- * by clearing the hardware PTE.  Currently Linux does not flush the TLB
- * for us in this case, which means the TLB will retain the transation
- * until either the TLB entry is evicted under pressure, or a context
- * switch which changes the user space mapping occurs.
- */
-#define PTRS_PER_PTE		512
-#define PTRS_PER_PMD		1
-#define PTRS_PER_PGD		2048
-
-/*
- * PMD_SHIFT determines the size of the area a second-level page table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PMD_SHIFT		21
-#define PGDIR_SHIFT		21
-
-#define LIBRARY_TEXT_START	0x0c000000
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pmd_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
-
-#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
-#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
-#endif /* !__ASSEMBLY__ */
-
-#define PMD_SIZE		(1UL << PMD_SHIFT)
-#define PMD_MASK		(~(PMD_SIZE-1))
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at.  This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
-
-#define FIRST_USER_PGD_NR	1
-#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
-
-/*
- * section address mask and size definitions.
- */
-#define SECTION_SHIFT		20
-#define SECTION_SIZE		(1UL << SECTION_SHIFT)
-#define SECTION_MASK		(~(SECTION_SIZE-1))
-
-/*
- * ARMv6 supersection address mask and size definitions.
- */
-#define SUPERSECTION_SHIFT	24
-#define SUPERSECTION_SIZE	(1UL << SUPERSECTION_SHIFT)
-#define SUPERSECTION_MASK	(~(SUPERSECTION_SIZE-1))
-
-/*
- * "Linux" PTE definitions.
- *
- * We keep two sets of PTEs - the hardware and the linux version.
- * This allows greater flexibility in the way we map the Linux bits
- * onto the hardware tables, and allows us to have YOUNG and DIRTY
- * bits.
- *
- * The PTE table pointer refers to the hardware entries; the "Linux"
- * entries are stored 1024 bytes below.
- */
-#define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
-#define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* matches PTE */
-#define L_PTE_USER		(1 << 4)
-#define L_PTE_WRITE		(1 << 5)
-#define L_PTE_EXEC		(1 << 6)
-#define L_PTE_DIRTY		(1 << 7)
-#define L_PTE_SHARED		(1 << 10)	/* shared(v6), coherent(xsc3) */
-
-#ifndef __ASSEMBLY__
-
-/*
- * The pgprot_* and protection_map entries will be fixed up in runtime
- * to include the cachable and bufferable bits based on memory policy,
- * as well as any architecture dependent bits like global/ASID and SMP
- * shared mapping bits.
- */
-#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
-#define _L_PTE_READ	L_PTE_USER | L_PTE_EXEC
-
-extern pgprot_t		pgprot_user;
-extern pgprot_t		pgprot_kernel;
-
-#define PAGE_NONE	pgprot_user
-#define PAGE_COPY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_SHARED	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
-				 L_PTE_WRITE)
-#define PAGE_READONLY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
-#define PAGE_KERNEL	pgprot_kernel
-
-#define __PAGE_NONE	__pgprot(_L_PTE_DEFAULT)
-#define __PAGE_COPY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-#define __PAGE_SHARED	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
-#define __PAGE_READONLY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The table below defines the page protection levels that we insert into our
- * Linux page table version.  These get translated into the best that the
- * architecture can perform.  Note that on most ARM hardware:
- *  1) We cannot do execute protection
- *  2) If we could do execute protection, then read is implied
- *  3) write implies read permissions
- */
-#define __P000  __PAGE_NONE
-#define __P001  __PAGE_READONLY
-#define __P010  __PAGE_COPY
-#define __P011  __PAGE_COPY
-#define __P100  __PAGE_READONLY
-#define __P101  __PAGE_READONLY
-#define __P110  __PAGE_COPY
-#define __P111  __PAGE_COPY
-
-#define __S000  __PAGE_NONE
-#define __S001  __PAGE_READONLY
-#define __S010  __PAGE_SHARED
-#define __S011  __PAGE_SHARED
-#define __S100  __PAGE_READONLY
-#define __S101  __PAGE_READONLY
-#define __S110  __PAGE_SHARED
-#define __S111  __PAGE_SHARED
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
-#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
-#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
-
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
-
-#define set_pte_at(mm,addr,ptep,pteval) do { \
-	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
- } while (0)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_special(pte)	(0)
-
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
-#define PTE_BIT_FUNC(fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
-PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
-PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
-PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
-PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
-PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
-
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-/*
- * Mark the prot value as uncacheable and unbufferable.
- */
-#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
-
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd))
-#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps)		\
-	do {				\
-		pmdpd[0] = pmdps[0];	\
-		pmdpd[1] = pmdps[1];	\
-		flush_pmd_entry(pmdpd);	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		pmdp[0] = __pmd(0);	\
-		pmdp[1] = __pmd(0);	\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
-
-static inline pte_t *pmd_page_vaddr(pmd_t pmd)
-{
-	unsigned long ptr;
-
-	ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
-	ptr += PTRS_PER_PTE * sizeof(void *);
-
-	return __va(ptr);
-}
-
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
-
-/*
- * Permanent address of a page. We never have highmem, so this is trivial.
- */
-#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_present(pgd)	(1)
-#define pgd_clear(pgdp)		do { } while (0)
-#define set_pgd(pgd,pgdp)	do { } while (0)
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
-
-#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr)	((pmd_t *)(dir))
-
-/* Find an entry in the third-level page table.. */
-#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
-	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
-	return pte;
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/* Encode and decode a swap entry.
- *
- * We support up to 32GB of swap on 4k machines
- */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)	(1)
-
-#include <asm-generic/pgtable.h>
-
-/*
- * We provide our own arch_get_unmapped_area to cope with VIPT caches.
- */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_pfn_range(vma,from,pfn,size,prot) \
-		remap_pfn_range(vma, from, pfn, size, prot)
-
-#define pgtable_cache_init() do { } while (0)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* CONFIG_MMU */
-
-#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm/plat-orion/mv_xor.h b/include/asm-arm/plat-orion/mv_xor.h
new file mode 100644
index 000000000000..c349e8ff5cc0
--- /dev/null
+++ b/include/asm-arm/plat-orion/mv_xor.h
@@ -0,0 +1,28 @@
+/*
+ * Marvell XOR platform device data definition file.
+ */
+
+#ifndef __ASM_PLAT_ORION_MV_XOR_H
+#define __ASM_PLAT_ORION_MV_XOR_H
+
+#include <linux/dmaengine.h>
+#include <linux/mbus.h>
+
+#define MV_XOR_SHARED_NAME	"mv_xor_shared"
+#define MV_XOR_NAME		"mv_xor"
+
+struct mbus_dram_target_info;
+
+struct mv_xor_platform_shared_data {
+	struct mbus_dram_target_info	*dram;
+};
+
+struct mv_xor_platform_data {
+	struct platform_device		*shared;
+	int				hw_id;
+	dma_cap_mask_t			cap_mask;
+	size_t				pool_size;
+};
+
+
+#endif
diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
index 71211c8b5384..5106acaa1d0e 100644
--- a/include/asm-arm/plat-s3c/iic.h
+++ b/include/asm-arm/plat-s3c/iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/iic.h
+/* arch/arm/mach-s3c2410/include/mach/iic.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -21,6 +21,7 @@
 */
 
 struct s3c2410_platform_i2c {
+	int		bus_num;	/* bus number to use */
 	unsigned int	flags;
 	unsigned int	slave_addr;	/* slave address for controller */
 	unsigned long	bus_freq;	/* standard bus frequency */
diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h
index ad6bbe90616e..f4dcd14af059 100644
--- a/include/asm-arm/plat-s3c/nand.h
+++ b/include/asm-arm/plat-s3c/nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/nand.h
+/* arch/arm/mach-s3c2410/include/mach/nand.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h
index b004dee6bcaf..c3878f7acb83 100644
--- a/include/asm-arm/plat-s3c/regs-ac97.h
+++ b/include/asm-arm/plat-s3c/regs-ac97.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h
+/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
  *
  * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h
index c7f231963e76..4323cccc86cd 100644
--- a/include/asm-arm/plat-s3c/regs-adc.h
+++ b/include/asm-arm/plat-s3c/regs-adc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-adc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
  *
  * Copyright (c) 2004 Shannon Holland <holland@loser.net>
  *
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
index 2ae29522f253..2f7c17de8ac8 100644
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ b/include/asm-arm/plat-s3c/regs-iic.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iic.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
  *
  * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
  *		http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
index d742205ac172..09f0b5503f5b 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/include/asm-arm/plat-s3c/regs-nand.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
+/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
  * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h
index 93b03c49710a..d5837cf8e402 100644
--- a/include/asm-arm/plat-s3c/regs-rtc.h
+++ b/include/asm-arm/plat-s3c/regs-rtc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h
index 923e114db663..a0daa647b92c 100644
--- a/include/asm-arm/plat-s3c/regs-serial.h
+++ b/include/asm-arm/plat-s3c/regs-serial.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-serial.h
+/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
  *
  *  From linux/include/asm-arm/hardware/serial_s3c2410.h
  *
diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h
index b5bc692f3489..b4366ea39677 100644
--- a/include/asm-arm/plat-s3c/regs-timer.h
+++ b/include/asm-arm/plat-s3c/regs-timer.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-timer.h
+/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h
index 56c4193b7a46..1229f076c0a0 100644
--- a/include/asm-arm/plat-s3c/regs-watchdog.h
+++ b/include/asm-arm/plat-s3c/regs-watchdog.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-watchdog.h
+/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h
index eaf77916a602..a6f1d5df13b4 100644
--- a/include/asm-arm/plat-s3c24xx/regs-iis.h
+++ b/include/asm-arm/plat-s3c24xx/regs-iis.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-iis.h
+/* arch/arm/mach-s3c2410/include/mach/regs-iis.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
index ea565b007d04..2b35479ee35c 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/include/asm-arm/plat-s3c24xx/regs-spi.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-spi.h
+/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
  *
  * Copyright (c) 2004 Fetron GmbH
  *
diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h
index e1e9805d2d9a..f0dd4a41b37b 100644
--- a/include/asm-arm/plat-s3c24xx/regs-udc.h
+++ b/include/asm-arm/plat-s3c24xx/regs-udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/regs-udc.h
+/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
  *
  * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
  *
diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h
index b8aa6cb69b58..546bb4008f49 100644
--- a/include/asm-arm/plat-s3c24xx/udc.h
+++ b/include/asm-arm/plat-s3c24xx/udc.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-s3c2410/udc.h
+/* arch/arm/mach-s3c2410/include/mach/udc.h
  *
  * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
  *
diff --git a/include/asm-arm/poll.h b/include/asm-arm/poll.h
deleted file mode 100644
index c98509d3149e..000000000000
--- a/include/asm-arm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-arm/posix_types.h b/include/asm-arm/posix_types.h
deleted file mode 100644
index c37379dadcb2..000000000000
--- a/include/asm-arm/posix_types.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  linux/include/asm-arm/posix_types.h
- *
- *  Copyright (C) 1996-1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996	RMK	Created
- */
-#ifndef __ARCH_ARM_POSIX_TYPES_H
-#define __ARCH_ARM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long		__kernel_ino_t;
-typedef unsigned short		__kernel_mode_t;
-typedef unsigned short		__kernel_nlink_t;
-typedef long			__kernel_off_t;
-typedef int			__kernel_pid_t;
-typedef unsigned short		__kernel_ipc_pid_t;
-typedef unsigned short		__kernel_uid_t;
-typedef unsigned short		__kernel_gid_t;
-typedef unsigned int		__kernel_size_t;
-typedef int			__kernel_ssize_t;
-typedef int			__kernel_ptrdiff_t;
-typedef long			__kernel_time_t;
-typedef long			__kernel_suseconds_t;
-typedef long			__kernel_clock_t;
-typedef int			__kernel_timer_t;
-typedef int			__kernel_clockid_t;
-typedef int			__kernel_daddr_t;
-typedef char *			__kernel_caddr_t;
-typedef unsigned short		__kernel_uid16_t;
-typedef unsigned short		__kernel_gid16_t;
-typedef unsigned int		__kernel_uid32_t;
-typedef unsigned int		__kernel_gid32_t;
-
-typedef unsigned short		__kernel_old_uid_t;
-typedef unsigned short		__kernel_old_gid_t;
-typedef unsigned short		__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long		__kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef	__FD_SET
-#define __FD_SET(fd, fdsetp) \
-		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
-
-#undef	__FD_CLR
-#define __FD_CLR(fd, fdsetp) \
-		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
-
-#undef	__FD_ISSET
-#define __FD_ISSET(fd, fdsetp) \
-		((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) \
-		(memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp))))
-
-#endif
-
-#endif
diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h
deleted file mode 100644
index 75ec760f4c74..000000000000
--- a/include/asm-arm/proc-fns.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- *  linux/include/asm-arm/proc-fns.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PROCFNS_H
-#define __ASM_PROCFNS_H
-
-#ifdef __KERNEL__
-
-
-/*
- * Work out if we need multiple CPU support
- */
-#undef MULTI_CPU
-#undef CPU_NAME
-
-/*
- * CPU_NAME - the prefix for CPU related functions
- */
-
-#ifdef CONFIG_CPU_32
-# ifdef CONFIG_CPU_ARM610
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm6
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM7TDMI
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm7tdmi
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM710
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm7
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM720T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm720
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM740T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm740
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM9TDMI
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm9tdmi
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM920T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm920
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM922T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm922
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM925T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm925
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM926T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm926
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM940T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm940
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM946E
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm946
-#  endif
-# endif
-# ifdef CONFIG_CPU_SA110
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_sa110
-#  endif
-# endif
-# ifdef CONFIG_CPU_SA1100
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_sa1100
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM1020
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1020
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM1020E
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1020e
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM1022
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1022
-#  endif
-# endif
-# ifdef CONFIG_CPU_ARM1026
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1026
-#  endif
-# endif
-# ifdef CONFIG_CPU_XSCALE
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_xscale
-#  endif
-# endif
-# ifdef CONFIG_CPU_XSC3
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_xsc3
-#  endif
-# endif
-# ifdef CONFIG_CPU_FEROCEON
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_feroceon
-#  endif
-# endif
-# ifdef CONFIG_CPU_V6
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_v6
-#  endif
-# endif
-# ifdef CONFIG_CPU_V7
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_v7
-#  endif
-# endif
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifndef MULTI_CPU
-#include <asm/cpu-single.h>
-#else
-#include <asm/cpu-multi32.h>
-#endif
-
-#include <asm/memory.h>
-
-#ifdef CONFIG_MMU
-
-#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
-
-#define cpu_get_pgd()	\
-	({						\
-		unsigned long pg;			\
-		__asm__("mrc	p15, 0, %0, c2, c0, 0"	\
-			 : "=r" (pg) : : "cc");		\
-		pg &= ~0x3fff;				\
-		(pgd_t *)phys_to_virt(pg);		\
-	})
-
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* __ASM_PROCFNS_H */
diff --git a/include/asm-arm/processor.h b/include/asm-arm/processor.h
deleted file mode 100644
index bd8029e8dc67..000000000000
--- a/include/asm-arm/processor.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  linux/include/asm-arm/processor.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_PROCESSOR_H
-#define __ASM_ARM_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
-			 TASK_SIZE : TASK_SIZE_26)
-#define STACK_TOP_MAX	TASK_SIZE
-#endif
-
-union debug_insn {
-	u32	arm;
-	u16	thumb;
-};
-
-struct debug_entry {
-	u32			address;
-	union debug_insn	insn;
-};
-
-struct debug_info {
-	int			nsaved;
-	struct debug_entry	bp[2];
-};
-
-struct thread_struct {
-							/* fault info	  */
-	unsigned long		address;
-	unsigned long		trap_no;
-	unsigned long		error_code;
-							/* debugging	  */
-	struct debug_info	debug;
-};
-
-#define INIT_THREAD  {	}
-
-#ifdef CONFIG_MMU
-#define nommu_start_thread(regs) do { } while (0)
-#else
-#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data
-#endif
-
-#define start_thread(regs,pc,sp)					\
-({									\
-	unsigned long *stack = (unsigned long *)sp;			\
-	set_fs(USER_DS);						\
-	memzero(regs->uregs, sizeof(regs->uregs));			\
-	if (current->personality & ADDR_LIMIT_32BIT)			\
-		regs->ARM_cpsr = USR_MODE;				\
-	else								\
-		regs->ARM_cpsr = USR26_MODE;				\
-	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
-		regs->ARM_cpsr |= PSR_T_BIT;				\
-	regs->ARM_pc = pc & ~1;		/* pc */			\
-	regs->ARM_sp = sp;		/* sp */			\
-	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
-	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
-	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
-	nommu_start_thread(regs);					\
-})
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define cpu_relax()			barrier()
-
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-#define task_pt_regs(p) \
-	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
-
-#define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
-#define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
-
-/*
- * Prefetching support - only ARMv5.
- */
-#if __LINUX_ARM_ARCH__ >= 5
-
-#define ARCH_HAS_PREFETCH
-static inline void prefetch(const void *ptr)
-{
-	__asm__ __volatile__(
-		"pld\t%0"
-		:
-		: "o" (*(char *)ptr)
-		: "cc");
-}
-
-#define ARCH_HAS_PREFETCHW
-#define prefetchw(ptr)	prefetch(ptr)
-
-#define ARCH_HAS_SPINLOCK_PREFETCH
-#define spin_lock_prefetch(x) do { } while (0)
-
-#endif
-
-#endif
-
-#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
deleted file mode 100644
index 4d3c685075e0..000000000000
--- a/include/asm-arm/procinfo.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/asm-arm/procinfo.h
- *
- *  Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PROCINFO_H
-#define __ASM_PROCINFO_H
-
-#ifdef __KERNEL__
-
-struct cpu_tlb_fns;
-struct cpu_user_fns;
-struct cpu_cache_fns;
-struct processor;
-
-/*
- * Note!  struct processor is always defined if we're
- * using MULTI_CPU, otherwise this entry is unused,
- * but still exists.
- *
- * NOTE! The following structure is defined by assembly
- * language, NOT C code.  For more information, check:
- *  arch/arm/mm/proc-*.S and arch/arm/kernel/head.S
- */
-struct proc_info_list {
-	unsigned int		cpu_val;
-	unsigned int		cpu_mask;
-	unsigned long		__cpu_mm_mmu_flags;	/* used by head.S */
-	unsigned long		__cpu_io_mmu_flags;	/* used by head.S */
-	unsigned long		__cpu_flush;		/* used by head.S */
-	const char		*arch_name;
-	const char		*elf_name;
-	unsigned int		elf_hwcap;
-	const char		*cpu_name;
-	struct processor	*proc;
-	struct cpu_tlb_fns	*tlb;
-	struct cpu_user_fns	*user;
-	struct cpu_cache_fns	*cache;
-};
-
-#else	/* __KERNEL__ */
-#include <asm/elf.h>
-#warning "Please include asm/elf.h instead"
-#endif	/* __KERNEL__ */
-#endif
diff --git a/include/asm-arm/ptrace.h b/include/asm-arm/ptrace.h
deleted file mode 100644
index 7aaa206cb54e..000000000000
--- a/include/asm-arm/ptrace.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  linux/include/asm-arm/ptrace.h
- *
- *  Copyright (C) 1996-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_PTRACE_H
-#define __ASM_ARM_PTRACE_H
-
-#include <asm/hwcap.h>
-
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-#define PTRACE_GETFPREGS	14
-#define PTRACE_SETFPREGS	15
-/* PTRACE_ATTACH is 16 */
-/* PTRACE_DETACH is 17 */
-#define PTRACE_GETWMMXREGS	18
-#define PTRACE_SETWMMXREGS	19
-/* 20 is unused */
-#define PTRACE_OLDSETOPTIONS	21
-#define PTRACE_GET_THREAD_AREA	22
-#define PTRACE_SET_SYSCALL	23
-/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETCRUNCHREGS	25
-#define PTRACE_SETCRUNCHREGS	26
-
-/*
- * PSR bits
- */
-#define USR26_MODE	0x00000000
-#define FIQ26_MODE	0x00000001
-#define IRQ26_MODE	0x00000002
-#define SVC26_MODE	0x00000003
-#define USR_MODE	0x00000010
-#define FIQ_MODE	0x00000011
-#define IRQ_MODE	0x00000012
-#define SVC_MODE	0x00000013
-#define ABT_MODE	0x00000017
-#define UND_MODE	0x0000001b
-#define SYSTEM_MODE	0x0000001f
-#define MODE32_BIT	0x00000010
-#define MODE_MASK	0x0000001f
-#define PSR_T_BIT	0x00000020
-#define PSR_F_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_A_BIT	0x00000100
-#define PSR_J_BIT	0x01000000
-#define PSR_Q_BIT	0x08000000
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_N_BIT	0x80000000
-#define PCMASK		0
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_s		0x00ff0000	/* Status		*/
-#define PSR_x		0x0000ff00	/* Extension		*/
-#define PSR_c		0x000000ff	/* Control		*/
-
-#ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.  Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-struct pt_regs {
-	long uregs[18];
-};
-
-#define ARM_cpsr	uregs[16]
-#define ARM_pc		uregs[15]
-#define ARM_lr		uregs[14]
-#define ARM_sp		uregs[13]
-#define ARM_ip		uregs[12]
-#define ARM_fp		uregs[11]
-#define ARM_r10		uregs[10]
-#define ARM_r9		uregs[9]
-#define ARM_r8		uregs[8]
-#define ARM_r7		uregs[7]
-#define ARM_r6		uregs[6]
-#define ARM_r5		uregs[5]
-#define ARM_r4		uregs[4]
-#define ARM_r3		uregs[3]
-#define ARM_r2		uregs[2]
-#define ARM_r1		uregs[1]
-#define ARM_r0		uregs[0]
-#define ARM_ORIG_r0	uregs[17]
-
-#ifdef __KERNEL__
-
-#define user_mode(regs)	\
-	(((regs)->ARM_cpsr & 0xf) == 0)
-
-#ifdef CONFIG_ARM_THUMB
-#define thumb_mode(regs) \
-	(((regs)->ARM_cpsr & PSR_T_BIT))
-#else
-#define thumb_mode(regs) (0)
-#endif
-
-#define isa_mode(regs) \
-	((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \
-	 (((regs)->ARM_cpsr & PSR_T_BIT) >> 5))
-
-#define processor_mode(regs) \
-	((regs)->ARM_cpsr & MODE_MASK)
-
-#define interrupts_enabled(regs) \
-	(!((regs)->ARM_cpsr & PSR_I_BIT))
-
-#define fast_interrupts_enabled(regs) \
-	(!((regs)->ARM_cpsr & PSR_F_BIT))
-
-/* Are the current registers suitable for user mode?
- * (used to maintain security in signal handlers)
- */
-static inline int valid_user_regs(struct pt_regs *regs)
-{
-	if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) {
-		regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
-		return 1;
-	}
-
-	/*
-	 * Force CPSR to something logical...
-	 */
-	regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT;
-	if (!(elf_hwcap & HWCAP_26BIT))
-		regs->ARM_cpsr |= USR_MODE;
-
-	return 0;
-}
-
-#endif	/* __KERNEL__ */
-
-#define pc_pointer(v) \
-	((v) & ~PCMASK)
-
-#define instruction_pointer(regs) \
-	(pc_pointer((regs)->ARM_pc))
-
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
-#ifdef __KERNEL__
-#define predicate(x)		((x) & 0xf0000000)
-#define PREDICATE_ALWAYS	0xe0000000
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif
-
diff --git a/include/asm-arm/resource.h b/include/asm-arm/resource.h
deleted file mode 100644
index 734b581b5b6a..000000000000
--- a/include/asm-arm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ARM_RESOURCE_H
-#define _ARM_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif
diff --git a/include/asm-arm/scatterlist.h b/include/asm-arm/scatterlist.h
deleted file mode 100644
index ca0a37d03400..000000000000
--- a/include/asm-arm/scatterlist.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASMARM_SCATTERLIST_H
-#define _ASMARM_SCATTERLIST_H
-
-#include <asm/memory.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* buffer offset		 */
-	dma_addr_t	dma_address;	/* dma address			 */
-	unsigned int	length;		/* length			 */
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/include/asm-arm/sections.h b/include/asm-arm/sections.h
deleted file mode 100644
index 2b8c5160388f..000000000000
--- a/include/asm-arm/sections.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/sections.h>
diff --git a/include/asm-arm/segment.h b/include/asm-arm/segment.h
deleted file mode 100644
index 9e24c21f6304..000000000000
--- a/include/asm-arm/segment.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARM_SEGMENT_H
-#define __ASM_ARM_SEGMENT_H
-
-#define __KERNEL_CS   0x0
-#define __KERNEL_DS   0x0
-
-#define __USER_CS     0x1
-#define __USER_DS     0x1
-
-#endif /* __ASM_ARM_SEGMENT_H */
-
diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-arm/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-arm/sembuf.h b/include/asm-arm/sembuf.h
deleted file mode 100644
index 1c0283954289..000000000000
--- a/include/asm-arm/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASMARM_SEMBUF_H
-#define _ASMARM_SEMBUF_H
-
-/* 
- * The semid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SEMBUF_H */
diff --git a/include/asm-arm/serial.h b/include/asm-arm/serial.h
deleted file mode 100644
index 015b262dc145..000000000000
--- a/include/asm-arm/serial.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/include/asm-arm/serial.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   15-10-1996	RMK	Created
- */
-
-#ifndef __ASM_SERIAL_H
-#define __ASM_SERIAL_H
-
-#define BASE_BAUD	(1843200 / 16)
-
-#endif
diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h
deleted file mode 100644
index 7bbf105463f1..000000000000
--- a/include/asm-arm/setup.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- *  linux/include/asm/setup.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Structure passed to kernel to tell it about the
- *  hardware it's running on.  See Documentation/arm/Setup
- *  for more info.
- */
-#ifndef __ASMARM_SETUP_H
-#define __ASMARM_SETUP_H
-
-#include <asm/types.h>
-
-#define COMMAND_LINE_SIZE 1024
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE	0x00000000
-
-struct tag_header {
-	__u32 size;
-	__u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE	0x54410001
-
-struct tag_core {
-	__u32 flags;		/* bit 0 = read-only */
-	__u32 pagesize;
-	__u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM	0x54410002
-
-struct tag_mem32 {
-	__u32	size;
-	__u32	start;	/* physical start address */
-};
-
-/* VGA text type displays */
-#define ATAG_VIDEOTEXT	0x54410003
-
-struct tag_videotext {
-	__u8		x;
-	__u8		y;
-	__u16		video_page;
-	__u8		video_mode;
-	__u8		video_cols;
-	__u16		video_ega_bx;
-	__u8		video_lines;
-	__u8		video_isvga;
-	__u16		video_points;
-};
-
-/* describes how the ramdisk will be used in kernel */
-#define ATAG_RAMDISK	0x54410004
-
-struct tag_ramdisk {
-	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
-	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
-	__u32 start;	/* starting block of floppy-based RAM disk image */
-};
-
-/* describes where the compressed ramdisk image lives (virtual address) */
-/*
- * this one accidentally used virtual addresses - as such,
- * it's deprecated.
- */
-#define ATAG_INITRD	0x54410005
-
-/* describes where the compressed ramdisk image lives (physical address) */
-#define ATAG_INITRD2	0x54420005
-
-struct tag_initrd {
-	__u32 start;	/* physical start address */
-	__u32 size;	/* size of compressed ramdisk image in bytes */
-};
-
-/* board serial number. "64 bits should be enough for everybody" */
-#define ATAG_SERIAL	0x54410006
-
-struct tag_serialnr {
-	__u32 low;
-	__u32 high;
-};
-
-/* board revision */
-#define ATAG_REVISION	0x54410007
-
-struct tag_revision {
-	__u32 rev;
-};
-
-/* initial values for vesafb-type framebuffers. see struct screen_info
- * in include/linux/tty.h
- */
-#define ATAG_VIDEOLFB	0x54410008
-
-struct tag_videolfb {
-	__u16		lfb_width;
-	__u16		lfb_height;
-	__u16		lfb_depth;
-	__u16		lfb_linelength;
-	__u32		lfb_base;
-	__u32		lfb_size;
-	__u8		red_size;
-	__u8		red_pos;
-	__u8		green_size;
-	__u8		green_pos;
-	__u8		blue_size;
-	__u8		blue_pos;
-	__u8		rsvd_size;
-	__u8		rsvd_pos;
-};
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE	0x54410009
-
-struct tag_cmdline {
-	char	cmdline[1];	/* this is the minimum size */
-};
-
-/* acorn RiscPC specific information */
-#define ATAG_ACORN	0x41000101
-
-struct tag_acorn {
-	__u32 memc_control_reg;
-	__u32 vram_pages;
-	__u8 sounddefault;
-	__u8 adfsdrives;
-};
-
-/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
-#define ATAG_MEMCLK	0x41000402
-
-struct tag_memclk {
-	__u32 fmemclk;
-};
-
-struct tag {
-	struct tag_header hdr;
-	union {
-		struct tag_core		core;
-		struct tag_mem32	mem;
-		struct tag_videotext	videotext;
-		struct tag_ramdisk	ramdisk;
-		struct tag_initrd	initrd;
-		struct tag_serialnr	serialnr;
-		struct tag_revision	revision;
-		struct tag_videolfb	videolfb;
-		struct tag_cmdline	cmdline;
-
-		/*
-		 * Acorn specific
-		 */
-		struct tag_acorn	acorn;
-
-		/*
-		 * DC21285 specific
-		 */
-		struct tag_memclk	memclk;
-	} u;
-};
-
-struct tagtable {
-	__u32 tag;
-	int (*parse)(const struct tag *);
-};
-
-#define tag_member_present(tag,member)				\
-	((unsigned long)(&((struct tag *)0L)->member + 1)	\
-		<= (tag)->hdr.size * 4)
-
-#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
-#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base)		\
-	for (t = base; t->hdr.size; t = tag_next(t))
-
-#ifdef __KERNEL__
-
-#define __tag __used __attribute__((__section__(".taglist.init")))
-#define __tagtable(tag, fn) \
-static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-/*
- * Memory map description
- */
-#ifdef CONFIG_ARCH_LH7A40X
-# define NR_BANKS 16
-#else
-# define NR_BANKS 8
-#endif
-
-struct membank {
-	unsigned long start;
-	unsigned long size;
-	int           node;
-};
-
-struct meminfo {
-	int nr_banks;
-	struct membank bank[NR_BANKS];
-};
-
-/*
- * Early command line parameters.
- */
-struct early_params {
-	const char *arg;
-	void (*fn)(char **p);
-};
-
-#define __early_param(name,fn)					\
-static struct early_params __early_##fn __used			\
-__attribute__((__section__(".early_param.init"))) = { name, fn }
-
-#endif  /*  __KERNEL__  */
-
-#endif
diff --git a/include/asm-arm/shmbuf.h b/include/asm-arm/shmbuf.h
deleted file mode 100644
index 2e5c67ba1c97..000000000000
--- a/include/asm-arm/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASMARM_SHMBUF_H
-#define _ASMARM_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SHMBUF_H */
diff --git a/include/asm-arm/shmparam.h b/include/asm-arm/shmparam.h
deleted file mode 100644
index a5223b3a9bf9..000000000000
--- a/include/asm-arm/shmparam.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASMARM_SHMPARAM_H
-#define _ASMARM_SHMPARAM_H
-
-/*
- * This should be the size of the virtually indexed cache/ways,
- * or page size, whichever is greater since the cache aliases
- * every size/ways bytes.
- */
-#define	SHMLBA	(4 * PAGE_SIZE)		 /* attach addr a multiple of this */
-
-/*
- * Enforce SHMLBA in shmat
- */
-#define __ARCH_FORCE_SHMLBA
-
-#endif /* _ASMARM_SHMPARAM_H */
diff --git a/include/asm-arm/sigcontext.h b/include/asm-arm/sigcontext.h
deleted file mode 100644
index fc0b80b6a6fc..000000000000
--- a/include/asm-arm/sigcontext.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _ASMARM_SIGCONTEXT_H
-#define _ASMARM_SIGCONTEXT_H
-
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked.  Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
-	unsigned long trap_no;
-	unsigned long error_code;
-	unsigned long oldmask;
-	unsigned long arm_r0;
-	unsigned long arm_r1;
-	unsigned long arm_r2;
-	unsigned long arm_r3;
-	unsigned long arm_r4;
-	unsigned long arm_r5;
-	unsigned long arm_r6;
-	unsigned long arm_r7;
-	unsigned long arm_r8;
-	unsigned long arm_r9;
-	unsigned long arm_r10;
-	unsigned long arm_fp;
-	unsigned long arm_ip;
-	unsigned long arm_sp;
-	unsigned long arm_lr;
-	unsigned long arm_pc;
-	unsigned long arm_cpsr;
-	unsigned long fault_address;
-};
-
-
-#endif
diff --git a/include/asm-arm/siginfo.h b/include/asm-arm/siginfo.h
deleted file mode 100644
index 5e21852e6039..000000000000
--- a/include/asm-arm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASMARM_SIGINFO_H
-#define _ASMARM_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/include/asm-arm/signal.h b/include/asm-arm/signal.h
deleted file mode 100644
index d0fb487aba4f..000000000000
--- a/include/asm-arm/signal.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef _ASMARM_SIGNAL_H
-#define _ASMARM_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-#define SIGSWI		32
-
-/*
- * SA_FLAGS values:
- *
- * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
- * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
- * SA_SIGINFO		deliver the signal with SIGINFO structs
- * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
- *			is running in 26-bit.
- * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
- * SA_RESTART		flag to get restarting signals (which were the default long ago)
- * SA_NODEFER		prevents the current signal from being masked in the handler.
- * SA_RESETHAND		clears the handler when the signal is delivered.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_THIRTYTWO	0x02000000
-#define SA_RESTORER	0x04000000
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif
-
-#endif
diff --git a/include/asm-arm/sizes.h b/include/asm-arm/sizes.h
deleted file mode 100644
index 503843db1565..000000000000
--- a/include/asm-arm/sizes.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Size definitions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h                       1
-
-/* handy sizes */
-#define SZ_16				0x00000010
-#define SZ_256				0x00000100
-#define SZ_512				0x00000200
-
-#define SZ_1K                           0x00000400
-#define SZ_4K                           0x00001000
-#define SZ_8K                           0x00002000
-#define SZ_16K                          0x00004000
-#define SZ_64K                          0x00010000
-#define SZ_128K                         0x00020000
-#define SZ_256K                         0x00040000
-#define SZ_512K                         0x00080000
-
-#define SZ_1M                           0x00100000
-#define SZ_2M                           0x00200000
-#define SZ_4M                           0x00400000
-#define SZ_8M                           0x00800000
-#define SZ_16M                          0x01000000
-#define SZ_32M                          0x02000000
-#define SZ_64M                          0x04000000
-#define SZ_128M                         0x08000000
-#define SZ_256M                         0x10000000
-#define SZ_512M                         0x20000000
-
-#define SZ_1G                           0x40000000
-#define SZ_2G                           0x80000000
-
-#endif
-
-/*         END */
diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h
deleted file mode 100644
index 7fffa2404b8e..000000000000
--- a/include/asm-arm/smp.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  linux/include/asm-arm/smp.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_SMP_H
-#define __ASM_ARM_SMP_H
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/thread_info.h>
-
-#include <asm/arch/smp.h>
-
-#ifndef CONFIG_SMP
-# error "<asm-arm/smp.h> included in non-SMP build"
-#endif
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-/*
- * at the moment, there's not a big penalty for changing CPUs
- * (the >big< penalty is running SMP in the first place)
- */
-#define PROC_CHANGE_PENALTY		15
-
-struct seq_file;
-
-/*
- * generate IPI list text
- */
-extern void show_ipi_list(struct seq_file *p);
-
-/*
- * Called from assembly code, this handles an IPI.
- */
-asmlinkage void do_IPI(struct pt_regs *regs);
-
-/*
- * Setup the SMP cpu_possible_map
- */
-extern void smp_init_cpus(void);
-
-/*
- * Move global data into per-processor storage.
- */
-extern void smp_store_cpu_info(unsigned int cpuid);
-
-/*
- * Raise an IPI cross call on CPUs in callmap.
- */
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
-
-/*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(cpumask_t mask);
-
-/*
- * Boot a secondary CPU, and assign it the specified idle task.
- * This also gives us the initial stack to use for this CPU.
- */
-extern int boot_secondary(unsigned int cpu, struct task_struct *);
-
-/*
- * Called from platform specific assembly code, this is the
- * secondary CPU entry point.
- */
-asmlinkage void secondary_start_kernel(void);
-
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initial data for bringing up a secondary CPU.
- */
-struct secondary_data {
-	unsigned long pgdir;
-	void *stack;
-};
-extern struct secondary_data secondary_data;
-
-extern int __cpu_disable(void);
-extern int mach_cpu_disable(unsigned int cpu);
-
-extern void __cpu_die(unsigned int cpu);
-extern void cpu_die(void);
-
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-/*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(unsigned int cpu);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(unsigned int cpu)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(unsigned int cpu);
-
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *);
-
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
-#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/include/asm-arm/socket.h b/include/asm-arm/socket.h
deleted file mode 100644
index 6817be9573a6..000000000000
--- a/include/asm-arm/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _ASMARM_SOCKET_H
-#define _ASMARM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-arm/sockios.h b/include/asm-arm/sockios.h
deleted file mode 100644
index a2588a2512df..000000000000
--- a/include/asm-arm/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_ARM_SOCKIOS_H
-#define __ARCH_ARM_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif
diff --git a/include/asm-arm/sparsemem.h b/include/asm-arm/sparsemem.h
deleted file mode 100644
index 277158191a0d..000000000000
--- a/include/asm-arm/sparsemem.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef ASMARM_SPARSEMEM_H
-#define ASMARM_SPARSEMEM_H
-
-#include <asm/memory.h>
-
-#define MAX_PHYSADDR_BITS	32
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	NODE_MEM_SIZE_BITS
-
-#endif
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
deleted file mode 100644
index 2b41ebbfa7ff..000000000000
--- a/include/asm-arm/spinlock.h
+++ /dev/null
@@ -1,224 +0,0 @@
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#if __LINUX_ARM_ARCH__ < 6
-#error SMP not supported on pre-ARMv6 CPUs
-#endif
-
-/*
- * ARMv6 Spin-locking.
- *
- * We exclusively read the old value.  If it is zero, we may have
- * won the lock, so we try exclusively storing it.  A memory barrier
- * is required after we get a lock, and before we release it, because
- * V6 CPUs are assumed to have weakly ordered memory.
- *
- * Unlocked value: 0
- * Locked value: 1
- */
-
-#define __raw_spin_is_locked(x)		((x)->lock != 0)
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
-
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-"	wfene\n"
-#endif
-"	strexeq	%0, %2, [%1]\n"
-"	teqeq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&lock->lock), "r" (1)
-	: "cc");
-
-	smp_mb();
-}
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-"	strexeq	%0, %2, [%1]"
-	: "=&r" (tmp)
-	: "r" (&lock->lock), "r" (1)
-	: "cc");
-
-	if (tmp == 0) {
-		smp_mb();
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-	smp_mb();
-
-	__asm__ __volatile__(
-"	str	%1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
-"	sev"
-#endif
-	:
-	: "r" (&lock->lock), "r" (0)
-	: "cc");
-}
-
-/*
- * RWLOCKS
- *
- *
- * Write locks are easy - we just set bit 31.  When unlocking, we can
- * just write zero since the lock is exclusively held.
- */
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-"	wfene\n"
-#endif
-"	strexeq	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&rw->lock), "r" (0x80000000)
-	: "cc");
-
-	smp_mb();
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-"	strexeq	%0, %2, [%1]"
-	: "=&r" (tmp)
-	: "r" (&rw->lock), "r" (0x80000000)
-	: "cc");
-
-	if (tmp == 0) {
-		smp_mb();
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
-	smp_mb();
-
-	__asm__ __volatile__(
-	"str	%1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
-"	sev\n"
-#endif
-	:
-	: "r" (&rw->lock), "r" (0)
-	: "cc");
-}
-
-/* write_can_lock - would write_trylock() succeed? */
-#define __raw_write_can_lock(x)		((x)->lock == 0)
-
-/*
- * Read locks are a bit more hairy:
- *  - Exclusively load the lock value.
- *  - Increment it.
- *  - Store new lock value if positive, and we still own this location.
- *    If the value is negative, we've already failed.
- *  - If we failed to store the value, we want a negative result.
- *  - If we failed, try again.
- * Unlocking is similarly hairy.  We may have multiple read locks
- * currently active.  However, we know we won't have any write
- * locks.
- */
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%2]\n"
-"	adds	%0, %0, #1\n"
-"	strexpl	%1, %0, [%2]\n"
-#ifdef CONFIG_CPU_32v6K
-"	wfemi\n"
-#endif
-"	rsbpls	%0, %1, #0\n"
-"	bmi	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
-
-	smp_mb();
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
-	unsigned long tmp, tmp2;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, #1\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-#ifdef CONFIG_CPU_32v6K
-"\n	cmp	%0, #0\n"
-"	mcreq   p15, 0, %0, c7, c10, 4\n"
-"	seveq"
-#endif
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *rw)
-{
-	unsigned long tmp, tmp2 = 1;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%2]\n"
-"	adds	%0, %0, #1\n"
-"	strexpl	%1, %0, [%2]\n"
-	: "=&r" (tmp), "+r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
-
-	smp_mb();
-	return tmp2 == 0;
-}
-
-/* read_can_lock - would read_trylock() succeed? */
-#define __raw_read_can_lock(x)		((x)->lock < 0x80000000)
-
-#define _raw_spin_relax(lock)	cpu_relax()
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
-
-#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-arm/spinlock_types.h b/include/asm-arm/spinlock_types.h
deleted file mode 100644
index 43e83f6d2ee5..000000000000
--- a/include/asm-arm/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SPINLOCK_TYPES_H
-#define __ASM_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
-
-#endif
diff --git a/include/asm-arm/stat.h b/include/asm-arm/stat.h
deleted file mode 100644
index 42c0c13999d5..000000000000
--- a/include/asm-arm/stat.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _ASMARM_STAT_H
-#define _ASMARM_STAT_H
-
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-
-#define STAT_HAVE_NSEC 
-
-struct stat {
-#if defined(__ARMEB__)
-	unsigned short st_dev;
-	unsigned short __pad1;
-#else
-	unsigned long  st_dev;
-#endif
-	unsigned long  st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-#if defined(__ARMEB__)
-	unsigned short st_rdev;
-	unsigned short __pad2;
-#else
-	unsigned long  st_rdev;
-#endif
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-	unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-	unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- * Note: The kernel zero's the padded region because glibc might read them
- * in the hope that the kernel has stretched to using larger sizes.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char   __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-	unsigned long	__st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char   __pad3[4];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long	st_ino;
-};
-
-#endif
diff --git a/include/asm-arm/statfs.h b/include/asm-arm/statfs.h
deleted file mode 100644
index a02e6a8c3d70..000000000000
--- a/include/asm-arm/statfs.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASMARM_STATFS_H
-#define _ASMARM_STATFS_H
-
-#ifndef __KERNEL_STRICT_NAMES
-# include <linux/types.h>
-typedef __kernel_fsid_t	fsid_t;
-#endif
-
-struct statfs {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u32 f_blocks;
-	__u32 f_bfree;
-	__u32 f_bavail;
-	__u32 f_files;
-	__u32 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-};
-
-/*
- * With EABI there is 4 bytes of padding added to this structure.
- * Let's pack it so the padding goes away to simplify dual ABI support.
- * Note that user space does NOT have to pack this structure.
- */
-struct statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-} __attribute__ ((packed,aligned(4)));
-
-#endif
diff --git a/include/asm-arm/string.h b/include/asm-arm/string.h
deleted file mode 100644
index e50c4a39b699..000000000000
--- a/include/asm-arm/string.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef __ASM_ARM_STRING_H
-#define __ASM_ARM_STRING_H
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-
-#define __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#define __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMZERO
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-extern void __memzero(void *ptr, __kernel_size_t n);
-
-#define memset(p,v,n)							\
-	({								\
-	 	void *__p = (p); size_t __n = n;			\
-		if ((__n) != 0) {					\
-			if (__builtin_constant_p((v)) && (v) == 0)	\
-				__memzero((__p),(__n));			\
-			else						\
-				memset((__p),(v),(__n));		\
-		}							\
-		(__p);							\
-	})
-
-#define memzero(p,n) 							\
-	({ 								\
-	 	void *__p = (p); size_t __n = n;			\
-	 	if ((__n) != 0) 					\
-	 		__memzero((__p),(__n)); 			\
-	 	(__p); 							\
-	 })
-
-#endif
diff --git a/include/asm-arm/suspend.h b/include/asm-arm/suspend.h
deleted file mode 100644
index cf0d0bdee74d..000000000000
--- a/include/asm-arm/suspend.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASMARM_SUSPEND_H
-#define _ASMARM_SUSPEND_H
-
-#endif
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
deleted file mode 100644
index 514af792a598..000000000000
--- a/include/asm-arm/system.h
+++ /dev/null
@@ -1,388 +0,0 @@
-#ifndef __ASM_ARM_SYSTEM_H
-#define __ASM_ARM_SYSTEM_H
-
-#ifdef __KERNEL__
-
-#include <asm/memory.h>
-
-#define CPU_ARCH_UNKNOWN	0
-#define CPU_ARCH_ARMv3		1
-#define CPU_ARCH_ARMv4		2
-#define CPU_ARCH_ARMv4T		3
-#define CPU_ARCH_ARMv5		4
-#define CPU_ARCH_ARMv5T		5
-#define CPU_ARCH_ARMv5TE	6
-#define CPU_ARCH_ARMv5TEJ	7
-#define CPU_ARCH_ARMv6		8
-#define CPU_ARCH_ARMv7		9
-
-/*
- * CR1 bits (CP#15 CR1)
- */
-#define CR_M	(1 << 0)	/* MMU enable				*/
-#define CR_A	(1 << 1)	/* Alignment abort enable		*/
-#define CR_C	(1 << 2)	/* Dcache enable			*/
-#define CR_W	(1 << 3)	/* Write buffer enable			*/
-#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
-#define CR_D	(1 << 5)	/* 32-bit data address range		*/
-#define CR_L	(1 << 6)	/* Implementation defined		*/
-#define CR_B	(1 << 7)	/* Big endian				*/
-#define CR_S	(1 << 8)	/* System MMU protection		*/
-#define CR_R	(1 << 9)	/* ROM MMU protection			*/
-#define CR_F	(1 << 10)	/* Implementation defined		*/
-#define CR_Z	(1 << 11)	/* Implementation defined		*/
-#define CR_I	(1 << 12)	/* Icache enable			*/
-#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
-#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
-#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
-#define CR_DT	(1 << 16)
-#define CR_IT	(1 << 18)
-#define CR_ST	(1 << 19)
-#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
-#define CR_U	(1 << 22)	/* Unaligned access operation		*/
-#define CR_XP	(1 << 23)	/* Extended page tables			*/
-#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
-
-#define CPUID_ID	0
-#define CPUID_CACHETYPE	1
-#define CPUID_TCM	2
-#define CPUID_TLBTYPE	3
-
-/*
- * This is used to ensure the compiler did actually allocate the register we
- * asked it for some inline assembly sequences.  Apparently we can't trust
- * the compiler from one version to another so a bit of paranoia won't hurt.
- * This string is meant to be concatenated with the inline asm string and
- * will cause compilation to stop on mismatch.
- * (for details, see gcc PR 15089)
- */
-#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/stringify.h>
-#include <linux/irqflags.h>
-
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg)							\
-	({								\
-		unsigned int __val;					\
-		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
-		    : "=r" (__val)					\
-		    :							\
-		    : "cc");						\
-		__val;							\
-	})
-#else
-extern unsigned int processor_id;
-#define read_cpuid(reg) (processor_id)
-#endif
-
-/*
- * The CPU ID never changes at run time, so we might as well tell the
- * compiler that it's constant.  Use this function to read the CPU ID
- * rather than directly reading processor_id or read_cpuid() directly.
- */
-static inline unsigned int read_cpuid_id(void) __attribute_const__;
-
-static inline unsigned int read_cpuid_id(void)
-{
-	return read_cpuid(CPUID_ID);
-}
-
-#define __exception	__attribute__((section(".exception.text")))
-
-struct thread_info;
-struct task_struct;
-
-/* information about the system we're running on */
-extern unsigned int system_rev;
-extern unsigned int system_serial_low;
-extern unsigned int system_serial_high;
-extern unsigned int mem_fclk_21285;
-
-struct pt_regs;
-
-void die(const char *msg, struct pt_regs *regs, int err)
-		__attribute__((noreturn));
-
-struct siginfo;
-void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
-		unsigned long err, unsigned long trap);
-
-void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
-				       struct pt_regs *),
-		     int sig, const char *name);
-
-#define xchg(ptr,x) \
-	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
-
-struct mm_struct;
-extern void show_pte(struct mm_struct *mm, unsigned long addr);
-extern void __show_regs(struct pt_regs *);
-
-extern int cpu_architecture(void);
-extern void cpu_init(void);
-
-void arm_machine_restart(char mode);
-extern void (*arm_pm_restart)(char str);
-
-/*
- * Intel's XScale3 core supports some v6 features (supersections, L2)
- * but advertises itself as v5 as it does not support the v6 ISA.  For
- * this reason, we need a way to explicitly test for this type of CPU.
- */
-#ifndef CONFIG_CPU_XSC3
-#define cpu_is_xsc3()	0
-#else
-static inline int cpu_is_xsc3(void)
-{
-	extern unsigned int processor_id;
-
-	if ((processor_id & 0xffffe000) == 0x69056000)
-		return 1;
-
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define	cpu_is_xscale()	0
-#else
-#define	cpu_is_xscale()	1
-#endif
-
-#define UDBG_UNDEFINED	(1 << 0)
-#define UDBG_SYSCALL	(1 << 1)
-#define UDBG_BADABORT	(1 << 2)
-#define UDBG_SEGV	(1 << 3)
-#define UDBG_BUS	(1 << 4)
-
-extern unsigned int user_debug;
-
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high()	(cr_alignment & CR_V)
-#else
-#define vectors_high()	(0)
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 7
-#define isb() __asm__ __volatile__ ("isb" : : : "memory")
-#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
-#define dmb() __asm__ __volatile__ ("dmb" : : : "memory")
-#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
-				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
-				    : : "r" (0) : "memory")
-#else
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-#endif
-
-#ifndef CONFIG_SMP
-#define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#else
-#define mb()		dmb()
-#define rmb()		dmb()
-#define wmb()		dmb()
-#define smp_mb()	dmb()
-#define smp_rmb()	dmb()
-#define smp_wmb()	dmb()
-#endif
-#define read_barrier_depends()		do { } while(0)
-#define smp_read_barrier_depends()	do { } while(0)
-
-#define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
-extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
-extern unsigned long cr_alignment;	/* defined in entry-armv.S */
-
-static inline unsigned int get_cr(void)
-{
-	unsigned int val;
-	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
-	return val;
-}
-
-static inline void set_cr(unsigned int val)
-{
-	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
-	  : : "r" (val) : "cc");
-	isb();
-}
-
-#ifndef CONFIG_SMP
-extern void adjust_cr(unsigned long mask, unsigned long set);
-#endif
-
-#define CPACC_FULL(n)		(3 << (n * 2))
-#define CPACC_SVC(n)		(1 << (n * 2))
-#define CPACC_DISABLE(n)	(0 << (n * 2))
-
-static inline unsigned int get_copro_access(void)
-{
-	unsigned int val;
-	asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
-	  : "=r" (val) : : "cc");
-	return val;
-}
-
-static inline void set_copro_access(unsigned int val)
-{
-	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
-	  : : "r" (val) : "cc");
-	isb();
-}
-
-/*
- * switch_mm() may do a full cache flush over the context switch,
- * so enable interrupts over the context switch to avoid high
- * latency.
- */
-#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.  schedule() itself
- * contains the memory barrier to tell GCC not to cache `current'.
- */
-extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
-
-#define switch_to(prev,next,last)					\
-do {									\
-	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
-} while (0)
-
-#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
-/*
- * On the StrongARM, "swp" is terminally broken since it bypasses the
- * cache totally.  This means that the cache becomes inconsistent, and,
- * since we use normal loads/stores as well, this is really bad.
- * Typically, this causes oopsen in filp_close, but could have other,
- * more disasterous effects.  There are two work-arounds:
- *  1. Disable interrupts and emulate the atomic swap
- *  2. Clean the cache, perform atomic swap, flush the cache
- *
- * We choose (1) since its the "easiest" to achieve here and is not
- * dependent on the processor type.
- *
- * NOTE that this solution won't work on an SMP system, so explcitly
- * forbid it here.
- */
-#define swp_is_buggy
-#endif
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
-	extern void __bad_xchg(volatile void *, int);
-	unsigned long ret;
-#ifdef swp_is_buggy
-	unsigned long flags;
-#endif
-#if __LINUX_ARM_ARCH__ >= 6
-	unsigned int tmp;
-#endif
-
-	switch (size) {
-#if __LINUX_ARM_ARCH__ >= 6
-	case 1:
-		asm volatile("@	__xchg1\n"
-		"1:	ldrexb	%0, [%3]\n"
-		"	strexb	%1, %2, [%3]\n"
-		"	teq	%1, #0\n"
-		"	bne	1b"
-			: "=&r" (ret), "=&r" (tmp)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-	case 4:
-		asm volatile("@	__xchg4\n"
-		"1:	ldrex	%0, [%3]\n"
-		"	strex	%1, %2, [%3]\n"
-		"	teq	%1, #0\n"
-		"	bne	1b"
-			: "=&r" (ret), "=&r" (tmp)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-#elif defined(swp_is_buggy)
-#ifdef CONFIG_SMP
-#error SMP is not supported on this platform
-#endif
-	case 1:
-		raw_local_irq_save(flags);
-		ret = *(volatile unsigned char *)ptr;
-		*(volatile unsigned char *)ptr = x;
-		raw_local_irq_restore(flags);
-		break;
-
-	case 4:
-		raw_local_irq_save(flags);
-		ret = *(volatile unsigned long *)ptr;
-		*(volatile unsigned long *)ptr = x;
-		raw_local_irq_restore(flags);
-		break;
-#else
-	case 1:
-		asm volatile("@	__xchg1\n"
-		"	swpb	%0, %1, [%2]"
-			: "=&r" (ret)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-	case 4:
-		asm volatile("@	__xchg4\n"
-		"	swp	%0, %1, [%2]"
-			: "=&r" (ret)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-#endif
-	default:
-		__bad_xchg(ptr, size), ret = 0;
-		break;
-	}
-
-	return ret;
-}
-
-extern void disable_hlt(void);
-extern void enable_hlt(void);
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#define arch_align_stack(x) (x)
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h
deleted file mode 100644
index f784d11f40b5..000000000000
--- a/include/asm-arm/termbits.h
+++ /dev/null
@@ -1,197 +0,0 @@
-#ifndef __ASM_ARM_TERMBITS_H
-#define __ASM_ARM_TERMBITS_H
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR    010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	   16
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif	/* __ASM_ARM_TERMBITS_H */
diff --git a/include/asm-arm/termios.h b/include/asm-arm/termios.h
deleted file mode 100644
index 293e3f1bc3f2..000000000000
--- a/include/asm-arm/termios.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef __ASM_ARM_TERMIOS_H
-#define __ASM_ARM_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
-	unsigned short __tmp;					\
-	get_user(__tmp,&(termio)->x);				\
-	*(unsigned short *) &(termios)->x = __tmp;		\
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __ASM_ARM_TERMIOS_H */
diff --git a/include/asm-arm/therm.h b/include/asm-arm/therm.h
deleted file mode 100644
index e51c923ecdf3..000000000000
--- a/include/asm-arm/therm.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor
- *  DS1620 thermometer driver (as used in the Rebel.com NetWinder)
- */
-#ifndef __ASM_THERM_H
-#define __ASM_THERM_H
-
-/* ioctl numbers for /dev/therm */
-#define CMD_SET_THERMOSTATE	0x53
-#define CMD_GET_THERMOSTATE	0x54
-#define CMD_GET_STATUS		0x56
-#define CMD_GET_TEMPERATURE	0x57
-#define CMD_SET_THERMOSTATE2	0x58
-#define CMD_GET_THERMOSTATE2	0x59
-#define CMD_GET_TEMPERATURE2	0x5a
-#define CMD_GET_FAN		0x5b
-#define CMD_SET_FAN		0x5c
-
-#define FAN_OFF			0
-#define FAN_ON			1
-#define FAN_ALWAYS_ON		2
-
-struct therm {
-	int hi;
-	int lo;
-};
-
-#endif
diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h
deleted file mode 100644
index f5a664786311..000000000000
--- a/include/asm-arm/thread_info.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *  linux/include/asm-arm/thread_info.h
- *
- *  Copyright (C) 2002 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_THREAD_INFO_H
-#define __ASM_ARM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/fpstate.h>
-
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		8192
-#define THREAD_START_SP		(THREAD_SIZE - 8)
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-struct exec_domain;
-
-#include <asm/types.h>
-#include <asm/domain.h>
-
-typedef unsigned long mm_segment_t;
-
-struct cpu_context_save {
-	__u32	r4;
-	__u32	r5;
-	__u32	r6;
-	__u32	r7;
-	__u32	r8;
-	__u32	r9;
-	__u32	sl;
-	__u32	fp;
-	__u32	sp;
-	__u32	pc;
-	__u32	extra[2];		/* Xscale 'acc' register, etc */
-};
-
-/*
- * low level task data that entry.S needs immediate access to.
- * __switch_to() assumes cpu_context follows immediately after cpu_domain.
- */
-struct thread_info {
-	unsigned long		flags;		/* low level flags */
-	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-	mm_segment_t		addr_limit;	/* address limit */
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	__u32			cpu;		/* cpu */
-	__u32			cpu_domain;	/* cpu domain */
-	struct cpu_context_save	cpu_context;	/* cpu context */
-	__u32			syscall;	/* syscall number */
-	__u8			used_cp[16];	/* thread used copro */
-	unsigned long		tp_value;
-	struct crunch_state	crunchstate;
-	union fp_state		fpstate __attribute__((aligned(8)));
-	union vfp_state		vfpstate;
-#ifdef CONFIG_ARM_THUMBEE
-	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
-#endif
-	struct restart_block	restart_block;
-};
-
-#define INIT_THREAD_INFO(tsk)						\
-{									\
-	.task		= &tsk,						\
-	.exec_domain	= &default_exec_domain,				\
-	.flags		= 0,						\
-	.preempt_count	= 1,						\
-	.addr_limit	= KERNEL_DS,					\
-	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
-	.restart_block	= {						\
-		.fn	= do_no_restart_syscall,			\
-	},								\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
-	register unsigned long sp asm ("sp");
-	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
-}
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) \
-	((struct thread_info *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, \
-		THREAD_SIZE_ORDER))
-#else
-#define alloc_thread_info(tsk) \
-	((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#endif
-
-#define free_thread_info(info) \
-	free_pages((unsigned long)info, THREAD_SIZE_ORDER);
-
-#define thread_saved_pc(tsk)	\
-	((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
-#define thread_saved_fp(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
-
-extern void crunch_task_disable(struct thread_info *);
-extern void crunch_task_copy(struct thread_info *, void *);
-extern void crunch_task_restore(struct thread_info *, void *);
-extern void crunch_task_release(struct thread_info *);
-
-extern void iwmmxt_task_disable(struct thread_info *);
-extern void iwmmxt_task_copy(struct thread_info *, void *);
-extern void iwmmxt_task_restore(struct thread_info *, void *);
-extern void iwmmxt_task_release(struct thread_info *);
-extern void iwmmxt_task_switch(struct thread_info *);
-
-#endif
-
-/*
- * We use bit 30 of the preempt_count to indicate that kernel
- * preemption is occurring.  See include/asm-arm/hardirq.h.
- */
-#define PREEMPT_ACTIVE	0x40000000
-
-/*
- * thread information flags:
- *  TIF_SYSCALL_TRACE	- syscall trace active
- *  TIF_SIGPENDING	- signal pending
- *  TIF_NEED_RESCHED	- rescheduling necessary
- *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
- *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
- */
-#define TIF_SIGPENDING		0
-#define TIF_NEED_RESCHED	1
-#define TIF_SYSCALL_TRACE	8
-#define TIF_POLLING_NRFLAG	16
-#define TIF_USING_IWMMXT	17
-#define TIF_MEMDIE		18
-#define TIF_FREEZE		19
-
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
-
-/*
- * Change these and you break ASM code in entry-common.S
- */
-#define _TIF_WORK_MASK		0x000000ff
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/include/asm-arm/thread_notify.h b/include/asm-arm/thread_notify.h
deleted file mode 100644
index 8866e5216840..000000000000
--- a/include/asm-arm/thread_notify.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  linux/include/asm-arm/thread_notify.h
- *
- *  Copyright (C) 2006 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_THREAD_NOTIFY_H
-#define ASMARM_THREAD_NOTIFY_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-#include <linux/notifier.h>
-#include <asm/thread_info.h>
-
-static inline int thread_register_notifier(struct notifier_block *n)
-{
-	extern struct atomic_notifier_head thread_notify_head;
-	return atomic_notifier_chain_register(&thread_notify_head, n);
-}
-
-static inline void thread_unregister_notifier(struct notifier_block *n)
-{
-	extern struct atomic_notifier_head thread_notify_head;
-	atomic_notifier_chain_unregister(&thread_notify_head, n);
-}
-
-static inline void thread_notify(unsigned long rc, struct thread_info *thread)
-{
-	extern struct atomic_notifier_head thread_notify_head;
-	atomic_notifier_call_chain(&thread_notify_head, rc, thread);
-}
-
-#endif
-
-/*
- * These are the reason codes for the thread notifier.
- */
-#define THREAD_NOTIFY_FLUSH	0
-#define THREAD_NOTIFY_RELEASE	1
-#define THREAD_NOTIFY_SWITCH	2
-
-#endif
-#endif
diff --git a/include/asm-arm/timex.h b/include/asm-arm/timex.h
deleted file mode 100644
index 7b8d4cb24be0..000000000000
--- a/include/asm-arm/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/timex.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Architecture Specific TIME specifications
- */
-#ifndef _ASMARM_TIMEX_H
-#define _ASMARM_TIMEX_H
-
-#include <asm/arch/timex.h>
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles (void)
-{
-	return 0;
-}
-
-#endif
diff --git a/include/asm-arm/tlb.h b/include/asm-arm/tlb.h
deleted file mode 100644
index 36bd402a21cb..000000000000
--- a/include/asm-arm/tlb.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/include/asm-arm/tlb.h
- *
- *  Copyright (C) 2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Experimentation shows that on a StrongARM, it appears to be faster
- *  to use the "invalidate whole tlb" rather than "invalidate single
- *  tlb" for this.
- *
- *  This appears true for both the process fork+exit case, as well as
- *  the munmap-large-area case.
- */
-#ifndef __ASMARM_TLB_H
-#define __ASMARM_TLB_H
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#ifndef CONFIG_MMU
-
-#include <linux/pagemap.h>
-#include <asm-generic/tlb.h>
-
-#else /* !CONFIG_MMU */
-
-#include <asm/pgalloc.h>
-
-/*
- * TLB handling.  This allows us to remove pages from the page
- * tables, and efficiently handle the TLB issues.
- */
-struct mmu_gather {
-	struct mm_struct	*mm;
-	unsigned int		fullmm;
-};
-
-DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-static inline struct mmu_gather *
-tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
-{
-	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
-
-	tlb->mm = mm;
-	tlb->fullmm = full_mm_flush;
-
-	return tlb;
-}
-
-static inline void
-tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
-{
-	if (tlb->fullmm)
-		flush_tlb_mm(tlb->mm);
-
-	/* keep the page table cache within bounds */
-	check_pgt_cache();
-
-	put_cpu_var(mmu_gathers);
-}
-
-#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
-
-/*
- * In the case of tlb vma handling, we can optimise these away in the
- * case where we're doing a full MM flush.  When we're doing a munmap,
- * the vmas are adjusted to only cover the region to be torn down.
- */
-static inline void
-tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
-{
-	if (!tlb->fullmm)
-		flush_cache_range(vma, vma->vm_start, vma->vm_end);
-}
-
-static inline void
-tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
-{
-	if (!tlb->fullmm)
-		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
-}
-
-#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
-
-#define tlb_migrate_finish(mm)		do { } while (0)
-
-#endif /* CONFIG_MMU */
-#endif
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
deleted file mode 100644
index 909656c747ef..000000000000
--- a/include/asm-arm/tlbflush.h
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- *  linux/include/asm-arm/tlbflush.h
- *
- *  Copyright (C) 1999-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_TLBFLUSH_H
-#define _ASMARM_TLBFLUSH_H
-
-
-#ifndef CONFIG_MMU
-
-#define tlb_flush(tlb)	((void) tlb)
-
-#else /* CONFIG_MMU */
-
-#include <asm/glue.h>
-
-#define TLB_V3_PAGE	(1 << 0)
-#define TLB_V4_U_PAGE	(1 << 1)
-#define TLB_V4_D_PAGE	(1 << 2)
-#define TLB_V4_I_PAGE	(1 << 3)
-#define TLB_V6_U_PAGE	(1 << 4)
-#define TLB_V6_D_PAGE	(1 << 5)
-#define TLB_V6_I_PAGE	(1 << 6)
-
-#define TLB_V3_FULL	(1 << 8)
-#define TLB_V4_U_FULL	(1 << 9)
-#define TLB_V4_D_FULL	(1 << 10)
-#define TLB_V4_I_FULL	(1 << 11)
-#define TLB_V6_U_FULL	(1 << 12)
-#define TLB_V6_D_FULL	(1 << 13)
-#define TLB_V6_I_FULL	(1 << 14)
-
-#define TLB_V6_U_ASID	(1 << 16)
-#define TLB_V6_D_ASID	(1 << 17)
-#define TLB_V6_I_ASID	(1 << 18)
-
-#define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
-#define TLB_DCLEAN	(1 << 30)
-#define TLB_WB		(1 << 31)
-
-/*
- *	MMU TLB Model
- *	=============
- *
- *	We have the following to choose from:
- *	  v3    - ARMv3
- *	  v4    - ARMv4 without write buffer
- *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
- *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
- *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
- *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
- */
-#undef _TLB
-#undef MULTI_TLB
-
-#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V3
-# define v3_possible_flags	v3_tlb_flags
-# define v3_always_flags	v3_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v3
-# endif
-#else
-# define v3_possible_flags	0
-# define v3_always_flags	(-1UL)
-#endif
-
-#define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WT
-# define v4_possible_flags	v4_tlb_flags
-# define v4_always_flags	v4_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4
-# endif
-#else
-# define v4_possible_flags	0
-# define v4_always_flags	(-1UL)
-#endif
-
-#define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WBI
-# define v4wbi_possible_flags	v4wbi_tlb_flags
-# define v4wbi_always_flags	v4wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wbi
-# endif
-#else
-# define v4wbi_possible_flags	0
-# define v4wbi_always_flags	(-1UL)
-#endif
-
-#define fr_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_FEROCEON
-# define fr_possible_flags	fr_tlb_flags
-# define fr_always_flags	fr_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wbi
-# endif
-#else
-# define fr_possible_flags	0
-# define fr_always_flags	(-1UL)
-#endif
-
-#define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WB
-# define v4wb_possible_flags	v4wb_tlb_flags
-# define v4wb_always_flags	v4wb_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wb
-# endif
-#else
-# define v4wb_possible_flags	0
-# define v4wb_always_flags	(-1UL)
-#endif
-
-#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
-			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
-			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
-			 TLB_V6_I_ASID | TLB_V6_D_ASID)
-
-#ifdef CONFIG_CPU_TLB_V6
-# define v6wbi_possible_flags	v6wbi_tlb_flags
-# define v6wbi_always_flags	v6wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v6wbi
-# endif
-#else
-# define v6wbi_possible_flags	0
-# define v6wbi_always_flags	(-1UL)
-#endif
-
-#ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v6wbi_tlb_flags
-# define v7wbi_always_flags	v6wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v7wbi
-# endif
-#else
-# define v7wbi_possible_flags	0
-# define v7wbi_always_flags	(-1UL)
-#endif
-
-#ifndef _TLB
-#error Unknown TLB model
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-
-struct cpu_tlb_fns {
-	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
-	void (*flush_kern_range)(unsigned long, unsigned long);
-	unsigned long tlb_flags;
-};
-
-/*
- * Select the calling method
- */
-#ifdef MULTI_TLB
-
-#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
-#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
-
-#else
-
-#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
-#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
-
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
-
-#endif
-
-extern struct cpu_tlb_fns cpu_tlb;
-
-#define __cpu_tlb_flags			cpu_tlb.tlb_flags
-
-/*
- *	TLB Management
- *	==============
- *
- *	The arch/arm/mm/tlb-*.S files implement these methods.
- *
- *	The TLB specific code is expected to perform whatever tests it
- *	needs to determine if it should invalidate the TLB for each
- *	call.  Start addresses are inclusive and end addresses are
- *	exclusive; it is safe to round these addresses down.
- *
- *	flush_tlb_all()
- *
- *		Invalidate the entire TLB.
- *
- *	flush_tlb_mm(mm)
- *
- *		Invalidate all TLB entries in a particular address
- *		space.
- *		- mm	- mm_struct describing address space
- *
- *	flush_tlb_range(mm,start,end)
- *
- *		Invalidate a range of TLB entries in the specified
- *		address space.
- *		- mm	- mm_struct describing address space
- *		- start - start address (may not be aligned)
- *		- end	- end address (exclusive, may not be aligned)
- *
- *	flush_tlb_page(vaddr,vma)
- *
- *		Invalidate the specified page in the specified address range.
- *		- vaddr - virtual address (may not be aligned)
- *		- vma	- vma_struct describing address range
- *
- *	flush_kern_tlb_page(kaddr)
- *
- *		Invalidate the TLB entry for the specified page.  The address
- *		will be in the kernels virtual memory space.  Current uses
- *		only require the D-TLB to be invalidated.
- *		- kaddr - Kernel virtual memory address
- */
-
-/*
- * We optimise the code below by:
- *  - building a set of TLB flags that might be set in __cpu_tlb_flags
- *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
- *  - if we're going to need __cpu_tlb_flags, access it once and only once
- *
- * This allows us to build optimal assembly for the single-CPU type case,
- * and as close to optimal given the compiler constrants for multi-CPU
- * case.  We could do better for the multi-CPU case if the compiler
- * implemented the "%?" method, but this has been discontinued due to too
- * many people getting it wrong.
- */
-#define possible_tlb_flags	(v3_possible_flags | \
-				 v4_possible_flags | \
-				 v4wbi_possible_flags | \
-				 fr_possible_flags | \
-				 v4wb_possible_flags | \
-				 v6wbi_possible_flags)
-
-#define always_tlb_flags	(v3_always_flags & \
-				 v4_always_flags & \
-				 v4wbi_always_flags & \
-				 fr_always_flags & \
-				 v4wb_always_flags & \
-				 v6wbi_always_flags)
-
-#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
-
-static inline void local_flush_tlb_all(void)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (tlb_flag(TLB_V3_FULL))
-		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
-		asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
-		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
-		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-		isb();
-	}
-}
-
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	const int zero = 0;
-	const int asid = ASID(mm);
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
-		if (tlb_flag(TLB_V3_FULL))
-			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_U_FULL))
-			asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_D_FULL))
-			asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_I_FULL))
-			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-	}
-
-	if (tlb_flag(TLB_V6_U_ASID))
-		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
-	if (tlb_flag(TLB_V6_D_ASID))
-		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
-	if (tlb_flag(TLB_V6_I_ASID))
-		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-	}
-}
-
-static inline void
-local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
-		if (tlb_flag(TLB_V3_PAGE))
-			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_U_PAGE))
-			asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_D_PAGE))
-			asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_I_PAGE))
-			asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
-		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
-			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-	}
-
-	if (tlb_flag(TLB_V6_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
-	if (tlb_flag(TLB_V6_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
-	if (tlb_flag(TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-	}
-}
-
-static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	kaddr &= PAGE_MASK;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (tlb_flag(TLB_V3_PAGE))
-		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
-	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
-		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-
-	if (tlb_flag(TLB_V6_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V6_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
-
-	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
-		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
-		/* flush the branch target cache */
-		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
-		dsb();
-		isb();
-	}
-}
-
-/*
- *	flush_pmd_entry
- *
- *	Flush a PMD entry (word aligned, or double-word aligned) to
- *	RAM if the TLB for the CPU we are running on requires this.
- *	This is typically used when we are creating PMD entries.
- *
- *	clean_pmd_entry
- *
- *	Clean (but don't drain the write buffer) if the CPU requires
- *	these operations.  This is typically used when we are removing
- *	PMD entries.
- */
-static inline void flush_pmd_entry(pmd_t *pmd)
-{
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_DCLEAN))
-		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_L2CLEAN_FR))
-		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-}
-
-static inline void clean_pmd_entry(pmd_t *pmd)
-{
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_DCLEAN))
-		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_L2CLEAN_FR))
-		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-			: : "r" (pmd) : "cc");
-}
-
-#undef tlb_flag
-#undef always_tlb_flags
-#undef possible_tlb_flags
-
-/*
- * Convert calls to our calling convention.
- */
-#define local_flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
-#define local_flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
-
-#ifndef CONFIG_SMP
-#define flush_tlb_all		local_flush_tlb_all
-#define flush_tlb_mm		local_flush_tlb_mm
-#define flush_tlb_page		local_flush_tlb_page
-#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
-#define flush_tlb_range		local_flush_tlb_range
-#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
-#else
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
-extern void flush_tlb_kernel_page(unsigned long kaddr);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-#endif
-
-/*
- * if PG_dcache_dirty is set for the page, we need to ensure that any
- * cache entries for the kernels virtual memory range are written
- * back to the page.
- */
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
-
-#endif
-
-#endif /* CONFIG_MMU */
-
-#endif
diff --git a/include/asm-arm/topology.h b/include/asm-arm/topology.h
deleted file mode 100644
index accbd7cad9b5..000000000000
--- a/include/asm-arm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_ARM_TOPOLOGY_H
-#define _ASM_ARM_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h
deleted file mode 100644
index f1541afcf85c..000000000000
--- a/include/asm-arm/traps.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASMARM_TRAP_H
-#define _ASMARM_TRAP_H
-
-#include <linux/list.h>
-
-struct undef_hook {
-	struct list_head node;
-	u32 instr_mask;
-	u32 instr_val;
-	u32 cpsr_mask;
-	u32 cpsr_val;
-	int (*fn)(struct pt_regs *regs, unsigned int instr);
-};
-
-void register_undef_hook(struct undef_hook *hook);
-void unregister_undef_hook(struct undef_hook *hook);
-
-static inline int in_exception_text(unsigned long ptr)
-{
-	extern char __exception_text_start[];
-	extern char __exception_text_end[];
-
-	return ptr >= (unsigned long)&__exception_text_start &&
-	       ptr < (unsigned long)&__exception_text_end;
-}
-
-#endif
diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h
deleted file mode 100644
index 345df01534a4..000000000000
--- a/include/asm-arm/types.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __ASM_ARM_TYPES_H
-#define __ASM_ARM_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-typedef u32 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif
-
diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h
deleted file mode 100644
index 4c1a3fa9f259..000000000000
--- a/include/asm-arm/uaccess.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- *  linux/include/asm-arm/uaccess.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_UACCESS_H
-#define _ASMARM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <asm/errno.h>
-#include <asm/memory.h>
-#include <asm/domain.h>
-#include <asm/system.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These two are intentionally not defined anywhere - if the kernel
- * code generates any references to them, that's a bug.
- */
-extern int __get_user_bad(void);
-extern int __put_user_bad(void);
-
-/*
- * Note that this is actually 0x1,0000,0000
- */
-#define KERNEL_DS	0x00000000
-#define get_ds()	(KERNEL_DS)
-
-#ifdef CONFIG_MMU
-
-#define USER_DS		TASK_SIZE
-#define get_fs()	(current_thread_info()->addr_limit)
-
-static inline void set_fs(mm_segment_t fs)
-{
-	current_thread_info()->addr_limit = fs;
-	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
-}
-
-#define segment_eq(a,b)	((a) == (b))
-
-#define __addr_ok(addr) ({ \
-	unsigned long flag; \
-	__asm__("cmp %2, %0; movlo %0, #0" \
-		: "=&r" (flag) \
-		: "0" (current_thread_info()->addr_limit), "r" (addr) \
-		: "cc"); \
-	(flag == 0); })
-
-/* We use 33-bit arithmetic here... */
-#define __range_ok(addr,size) ({ \
-	unsigned long flag, roksum; \
-	__chk_user_ptr(addr);	\
-	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
-		: "=&r" (flag), "=&r" (roksum) \
-		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
-		: "cc"); \
-	flag; })
-
-/*
- * Single-value transfer routines.  They automatically use the right
- * size if we just have the right pointer type.  Note that the functions
- * which read from user space (*get_*) need to take care not to leak
- * kernel data even if the calling code is buggy and fails to check
- * the return value.  This means zeroing out the destination variable
- * or buffer on error.  Normally this is done out of line by the
- * fixup code, but there are a few places where it intrudes on the
- * main code path.  When we only write to user space, there is no
- * problem.
- */
-extern int __get_user_1(void *);
-extern int __get_user_2(void *);
-extern int __get_user_4(void *);
-
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
-	   __asm__ __volatile__ (					\
-		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
-		"bl	__get_user_" #__s				\
-		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
-
-#define get_user(x,p)							\
-	({								\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register unsigned long __r2 asm("r2");			\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
-		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
-			break;						\
-		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
-			break;						\
-		default: __e = __get_user_bad(); break;			\
-		}							\
-		x = (typeof(*(p))) __r2;				\
-		__e;							\
-	})
-
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-
-#define __put_user_x(__r2,__p,__e,__s)					\
-	   __asm__ __volatile__ (					\
-		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
-		"bl	__put_user_" #__s				\
-		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
-		: "ip", "lr", "cc")
-
-#define put_user(x,p)							\
-	({								\
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
-			break;						\
-		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
-			break;						\
-		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
-			break;						\
-		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
-			break;						\
-		default: __e = __put_user_bad(); break;			\
-		}							\
-		__e;							\
-	})
-
-#else /* CONFIG_MMU */
-
-/*
- * uClinux has only one addr space, so has simplified address limits.
- */
-#define USER_DS			KERNEL_DS
-
-#define segment_eq(a,b)		(1)
-#define __addr_ok(addr)		(1)
-#define __range_ok(addr,size)	(0)
-#define get_fs()		(KERNEL_DS)
-
-static inline void set_fs(mm_segment_t fs)
-{
-}
-
-#define get_user(x,p)	__get_user(x,p)
-#define put_user(x,p)	__put_user(x,p)
-
-#endif /* CONFIG_MMU */
-
-#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
-
-/*
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success.  Note that these
- * versions are void (ie, don't return a value as such).
- */
-#define __get_user(x,ptr)						\
-({									\
-	long __gu_err = 0;						\
-	__get_user_err((x),(ptr),__gu_err);				\
-	__gu_err;							\
-})
-
-#define __get_user_error(x,ptr,err)					\
-({									\
-	__get_user_err((x),(ptr),err);					\
-	(void) 0;							\
-})
-
-#define __get_user_err(x,ptr,err)					\
-do {									\
-	unsigned long __gu_addr = (unsigned long)(ptr);			\
-	unsigned long __gu_val;						\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
-	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
-	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
-	default: (__gu_val) = __get_user_bad();				\
-	}								\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-} while (0)
-
-#define __get_user_asm_byte(x,addr,err)				\
-	__asm__ __volatile__(					\
-	"1:	ldrbt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	mov	%1, #0\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err), "=&r" (x)					\
-	: "r" (addr), "i" (-EFAULT)				\
-	: "cc")
-
-#ifndef __ARMEB__
-#define __get_user_asm_half(x,__gu_addr,err)			\
-({								\
-	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
-	(x) = __b1 | (__b2 << 8);				\
-})
-#else
-#define __get_user_asm_half(x,__gu_addr,err)			\
-({								\
-	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
-	(x) = (__b1 << 8) | __b2;				\
-})
-#endif
-
-#define __get_user_asm_word(x,addr,err)				\
-	__asm__ __volatile__(					\
-	"1:	ldrt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	mov	%1, #0\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err), "=&r" (x)					\
-	: "r" (addr), "i" (-EFAULT)				\
-	: "cc")
-
-#define __put_user(x,ptr)						\
-({									\
-	long __pu_err = 0;						\
-	__put_user_err((x),(ptr),__pu_err);				\
-	__pu_err;							\
-})
-
-#define __put_user_error(x,ptr,err)					\
-({									\
-	__put_user_err((x),(ptr),err);					\
-	(void) 0;							\
-})
-
-#define __put_user_err(x,ptr,err)					\
-do {									\
-	unsigned long __pu_addr = (unsigned long)(ptr);			\
-	__typeof__(*(ptr)) __pu_val = (x);				\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
-	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
-	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
-	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
-	default: __put_user_bad();					\
-	}								\
-} while (0)
-
-#define __put_user_asm_byte(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	strbt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err)						\
-	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
-	: "cc")
-
-#ifndef __ARMEB__
-#define __put_user_asm_half(x,__pu_addr,err)			\
-({								\
-	unsigned long __temp = (unsigned long)(x);		\
-	__put_user_asm_byte(__temp, __pu_addr, err);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
-})
-#else
-#define __put_user_asm_half(x,__pu_addr,err)			\
-({								\
-	unsigned long __temp = (unsigned long)(x);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
-	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
-})
-#endif
-
-#define __put_user_asm_word(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	strt	%1,[%2],#0\n"				\
-	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.previous"					\
-	: "+r" (err)						\
-	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
-	: "cc")
-
-#ifndef __ARMEB__
-#define	__reg_oper0	"%R2"
-#define	__reg_oper1	"%Q2"
-#else
-#define	__reg_oper0	"%Q2"
-#define	__reg_oper1	"%R2"
-#endif
-
-#define __put_user_asm_dword(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1], #0\n"		\
-	"3:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"4:	mov	%0, %3\n"				\
-	"	b	3b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
-	"	.align	3\n"					\
-	"	.long	1b, 4b\n"				\
-	"	.long	2b, 4b\n"				\
-	"	.previous"					\
-	: "+r" (err), "+r" (__pu_addr)				\
-	: "r" (x), "i" (-EFAULT)				\
-	: "cc")
-
-
-#ifdef CONFIG_MMU
-extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
-#else
-#define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
-#define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
-#define __clear_user(addr,n)		(memset((void __force *)addr, 0, n), 0)
-#endif
-
-extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
-extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
-
-static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	if (access_ok(VERIFY_READ, from, n))
-		n = __copy_from_user(to, from, n);
-	else /* security hole - plug it */
-		memzero(to, n);
-	return n;
-}
-
-static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = __copy_to_user(to, from, n);
-	return n;
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = __clear_user(to, n);
-	return n;
-}
-
-static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		res = __strncpy_from_user(dst, src, count);
-	return res;
-}
-
-#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
-
-static inline long __must_check strnlen_user(const char __user *s, long n)
-{
-	unsigned long res = 0;
-
-	if (__addr_ok(s))
-		res = __strnlen_user(s, n);
-
-	return res;
-}
-
-#endif /* _ASMARM_UACCESS_H */
diff --git a/include/asm-arm/ucontext.h b/include/asm-arm/ucontext.h
deleted file mode 100644
index bf65e9f4525d..000000000000
--- a/include/asm-arm/ucontext.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef _ASMARM_UCONTEXT_H
-#define _ASMARM_UCONTEXT_H
-
-#include <asm/fpstate.h>
-
-/*
- * struct sigcontext only has room for the basic registers, but struct
- * ucontext now has room for all registers which need to be saved and
- * restored.  Coprocessor registers are stored in uc_regspace.  Each
- * coprocessor's saved state should start with a documented 32-bit magic
- * number, followed by a 32-bit word giving the coproccesor's saved size.
- * uc_regspace may be expanded if necessary, although this takes some
- * coordination with glibc.
- */
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;
-	/* Allow for uc_sigmask growth.  Glibc uses a 1024-bit sigset_t.  */
-	int		  __unused[32 - (sizeof (sigset_t) / sizeof (int))];
-	/* Last for extensibility.  Eight byte aligned because some
-	   coprocessors require eight byte alignment.  */
- 	unsigned long	  uc_regspace[128] __attribute__((__aligned__(8)));
-};
-
-#ifdef __KERNEL__
-
-/*
- * Coprocessor save state.  The magic values and specific
- * coprocessor's layouts are part of the userspace ABI.  Each one of
- * these should be a multiple of eight bytes and aligned to eight
- * bytes, to prevent unpredictable padding in the signal frame.
- */
-
-#ifdef CONFIG_CRUNCH
-#define CRUNCH_MAGIC		0x5065cf03
-#define CRUNCH_STORAGE_SIZE	(CRUNCH_SIZE + 8)
-
-struct crunch_sigframe {
-	unsigned long	magic;
-	unsigned long	size;
-	struct crunch_state	storage;
-} __attribute__((__aligned__(8)));
-#endif
-
-#ifdef CONFIG_IWMMXT
-/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */
-#define IWMMXT_MAGIC		0x12ef842a
-#define IWMMXT_STORAGE_SIZE	(IWMMXT_SIZE + 8)
-
-struct iwmmxt_sigframe {
-	unsigned long	magic;
-	unsigned long	size;
-	struct iwmmxt_struct storage;
-} __attribute__((__aligned__(8)));
-#endif /* CONFIG_IWMMXT */
-
-#ifdef CONFIG_VFP
-#if __LINUX_ARM_ARCH__ < 6
-/* For ARM pre-v6, we use fstmiax and fldmiax.  This adds one extra
- * word after the registers, and a word of padding at the end for
- * alignment.  */
-#define VFP_MAGIC		0x56465001
-#define VFP_STORAGE_SIZE	152
-#else
-#define VFP_MAGIC		0x56465002
-#define VFP_STORAGE_SIZE	144
-#endif
-
-struct vfp_sigframe
-{
-	unsigned long		magic;
-	unsigned long		size;
-	union vfp_state		storage;
-};
-#endif /* CONFIG_VFP */
-
-/*
- * Auxiliary signal frame.  This saves stuff like FP state.
- * The layout of this structure is not part of the user ABI,
- * because the config options aren't.  uc_regspace is really
- * one of these.
- */
-struct aux_sigframe {
-#ifdef CONFIG_CRUNCH
-	struct crunch_sigframe	crunch;
-#endif
-#ifdef CONFIG_IWMMXT
-	struct iwmmxt_sigframe	iwmmxt;
-#endif
-#if 0 && defined CONFIG_VFP /* Not yet saved.  */
-	struct vfp_sigframe	vfp;
-#endif
-	/* Something that isn't a valid magic number for any coprocessor.  */
-	unsigned long		end_magic;
-} __attribute__((__aligned__(8)));
-
-#endif
-
-#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h
deleted file mode 100644
index 44593a894903..000000000000
--- a/include/asm-arm/unaligned.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_ARM_UNALIGNED_H
-#define _ASM_ARM_UNALIGNED_H
-
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-/*
- * Select endianness
- */
-#ifndef __ARMEB__
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-#else
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-#endif
-
-#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
deleted file mode 100644
index 7c570082b1e0..000000000000
--- a/include/asm-arm/unistd.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- *  linux/include/asm-arm/unistd.h
- *
- *  Copyright (C) 2001-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
- * no matter what the change is.  Thanks!
- */
-#ifndef __ASM_ARM_UNISTD_H
-#define __ASM_ARM_UNISTD_H
-
-#define __NR_OABI_SYSCALL_BASE	0x900000
-
-#if defined(__thumb__) || defined(__ARM_EABI__)
-#define __NR_SYSCALL_BASE	0
-#else
-#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
-#endif
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
-#define __NR_exit			(__NR_SYSCALL_BASE+  1)
-#define __NR_fork			(__NR_SYSCALL_BASE+  2)
-#define __NR_read			(__NR_SYSCALL_BASE+  3)
-#define __NR_write			(__NR_SYSCALL_BASE+  4)
-#define __NR_open			(__NR_SYSCALL_BASE+  5)
-#define __NR_close			(__NR_SYSCALL_BASE+  6)
-					/* 7 was sys_waitpid */
-#define __NR_creat			(__NR_SYSCALL_BASE+  8)
-#define __NR_link			(__NR_SYSCALL_BASE+  9)
-#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
-#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
-#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
-#define __NR_time			(__NR_SYSCALL_BASE+ 13)
-#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
-#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
-#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
-					/* 17 was sys_break */
-					/* 18 was sys_stat */
-#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
-#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
-#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
-#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
-#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
-#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
-#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
-#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
-#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
-					/* 28 was sys_fstat */
-#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
-#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
-					/* 31 was sys_stty */
-					/* 32 was sys_gtty */
-#define __NR_access			(__NR_SYSCALL_BASE+ 33)
-#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
-					/* 35 was sys_ftime */
-#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
-#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
-#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
-#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
-#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
-#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
-#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
-#define __NR_times			(__NR_SYSCALL_BASE+ 43)
-					/* 44 was sys_prof */
-#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
-#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
-#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
-					/* 48 was sys_signal */
-#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
-#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
-#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
-#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
-					/* 53 was sys_lock */
-#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
-#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
-					/* 56 was sys_mpx */
-#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
-					/* 58 was sys_ulimit */
-					/* 59 was sys_olduname */
-#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
-#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
-#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
-#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
-#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
-#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
-#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
-#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
-					/* 68 was sys_sgetmask */
-					/* 69 was sys_ssetmask */
-#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
-#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
-#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
-#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
-#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
-#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
-#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
-#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
-#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
-#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
-#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
-#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
-#define __NR_select			(__NR_SYSCALL_BASE+ 82)
-#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
-					/* 84 was sys_lstat */
-#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
-#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
-#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
-#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
-#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
-#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
-#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
-#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
-#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
-#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
-#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
-#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
-#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
-					/* 98 was sys_profil */
-#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
-#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
-					/* 101 was sys_ioperm */
-#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
-#define __NR_syslog			(__NR_SYSCALL_BASE+103)
-#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
-#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
-#define __NR_stat			(__NR_SYSCALL_BASE+106)
-#define __NR_lstat			(__NR_SYSCALL_BASE+107)
-#define __NR_fstat			(__NR_SYSCALL_BASE+108)
-					/* 109 was sys_uname */
-					/* 110 was sys_iopl */
-#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
-					/* 112 was sys_idle */
-#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
-#define __NR_wait4			(__NR_SYSCALL_BASE+114)
-#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
-#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
-#define __NR_ipc			(__NR_SYSCALL_BASE+117)
-#define __NR_fsync			(__NR_SYSCALL_BASE+118)
-#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
-#define __NR_clone			(__NR_SYSCALL_BASE+120)
-#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
-#define __NR_uname			(__NR_SYSCALL_BASE+122)
-					/* 123 was sys_modify_ldt */
-#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
-#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
-#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
-					/* 127 was sys_create_module */
-#define __NR_init_module		(__NR_SYSCALL_BASE+128)
-#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
-					/* 130 was sys_get_kernel_syms */
-#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
-#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
-#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
-#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
-#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
-#define __NR_personality		(__NR_SYSCALL_BASE+136)
-					/* 137 was sys_afs_syscall */
-#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
-#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
-#define __NR__llseek			(__NR_SYSCALL_BASE+140)
-#define __NR_getdents			(__NR_SYSCALL_BASE+141)
-#define __NR__newselect			(__NR_SYSCALL_BASE+142)
-#define __NR_flock			(__NR_SYSCALL_BASE+143)
-#define __NR_msync			(__NR_SYSCALL_BASE+144)
-#define __NR_readv			(__NR_SYSCALL_BASE+145)
-#define __NR_writev			(__NR_SYSCALL_BASE+146)
-#define __NR_getsid			(__NR_SYSCALL_BASE+147)
-#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
-#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
-#define __NR_mlock			(__NR_SYSCALL_BASE+150)
-#define __NR_munlock			(__NR_SYSCALL_BASE+151)
-#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
-#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
-#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
-#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
-#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
-#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
-#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
-#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
-#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
-#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
-#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
-#define __NR_mremap			(__NR_SYSCALL_BASE+163)
-#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
-#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
-					/* 166 was sys_vm86 */
-					/* 167 was sys_query_module */
-#define __NR_poll			(__NR_SYSCALL_BASE+168)
-#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
-#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
-#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
-#define __NR_prctl			(__NR_SYSCALL_BASE+172)
-#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
-#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
-#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
-#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
-#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
-#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
-#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
-#define __NR_pread64			(__NR_SYSCALL_BASE+180)
-#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
-#define __NR_chown			(__NR_SYSCALL_BASE+182)
-#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
-#define __NR_capget			(__NR_SYSCALL_BASE+184)
-#define __NR_capset			(__NR_SYSCALL_BASE+185)
-#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
-#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
-					/* 188 reserved */
-					/* 189 reserved */
-#define __NR_vfork			(__NR_SYSCALL_BASE+190)
-#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
-#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
-#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
-#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
-#define __NR_stat64			(__NR_SYSCALL_BASE+195)
-#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
-#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
-#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
-#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
-#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
-#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
-#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
-#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
-#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
-#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
-#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
-#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
-#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
-#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
-#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
-#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
-#define __NR_chown32			(__NR_SYSCALL_BASE+212)
-#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
-#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
-#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
-#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
-#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
-#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
-#define __NR_mincore			(__NR_SYSCALL_BASE+219)
-#define __NR_madvise			(__NR_SYSCALL_BASE+220)
-#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
-					/* 222 for tux */
-					/* 223 is unused */
-#define __NR_gettid			(__NR_SYSCALL_BASE+224)
-#define __NR_readahead			(__NR_SYSCALL_BASE+225)
-#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
-#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
-#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
-#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
-#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
-#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
-#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
-#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
-#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
-#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
-#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
-#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
-#define __NR_tkill			(__NR_SYSCALL_BASE+238)
-#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
-#define __NR_futex			(__NR_SYSCALL_BASE+240)
-#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
-#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
-#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
-#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
-#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
-#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
-#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
-#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
-#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
-#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
-#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
-#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
-#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
-					/* 254 for set_thread_area */
-					/* 255 for get_thread_area */
-#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
-#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
-#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
-#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
-#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
-#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
-#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
-#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
-#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
-#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
-#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
-#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
-#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
-#define __NR_utimes			(__NR_SYSCALL_BASE+269)
-#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
-#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
-#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
-#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
-#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
-#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
-#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
-#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
-#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
-#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
-#define __NR_waitid			(__NR_SYSCALL_BASE+280)
-#define __NR_socket			(__NR_SYSCALL_BASE+281)
-#define __NR_bind			(__NR_SYSCALL_BASE+282)
-#define __NR_connect			(__NR_SYSCALL_BASE+283)
-#define __NR_listen			(__NR_SYSCALL_BASE+284)
-#define __NR_accept			(__NR_SYSCALL_BASE+285)
-#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
-#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
-#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
-#define __NR_send			(__NR_SYSCALL_BASE+289)
-#define __NR_sendto			(__NR_SYSCALL_BASE+290)
-#define __NR_recv			(__NR_SYSCALL_BASE+291)
-#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
-#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
-#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
-#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
-#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
-#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
-#define __NR_semop			(__NR_SYSCALL_BASE+298)
-#define __NR_semget			(__NR_SYSCALL_BASE+299)
-#define __NR_semctl			(__NR_SYSCALL_BASE+300)
-#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
-#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
-#define __NR_msgget			(__NR_SYSCALL_BASE+303)
-#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
-#define __NR_shmat			(__NR_SYSCALL_BASE+305)
-#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
-#define __NR_shmget			(__NR_SYSCALL_BASE+307)
-#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
-#define __NR_add_key			(__NR_SYSCALL_BASE+309)
-#define __NR_request_key		(__NR_SYSCALL_BASE+310)
-#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
-#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
-#define __NR_vserver			(__NR_SYSCALL_BASE+313)
-#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
-#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
-#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
-#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
-#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
-#define __NR_mbind			(__NR_SYSCALL_BASE+319)
-#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
-#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
-#define __NR_openat			(__NR_SYSCALL_BASE+322)
-#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
-#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
-#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
-#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
-#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
-#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
-#define __NR_renameat			(__NR_SYSCALL_BASE+329)
-#define __NR_linkat			(__NR_SYSCALL_BASE+330)
-#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
-#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
-#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
-#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-					/* 335 for pselect6 */
-					/* 336 for ppoll */
-#define __NR_unshare			(__NR_SYSCALL_BASE+337)
-#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
-#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
-#define __NR_splice			(__NR_SYSCALL_BASE+340)
-#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
-#define __NR_sync_file_range2		__NR_arm_sync_file_range
-#define __NR_tee			(__NR_SYSCALL_BASE+342)
-#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
-#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
-#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-					/* 346 for epoll_pwait */
-#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
-#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
-#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
-#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
-#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
-#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
-#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
-#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
-
-/*
- * The following SWIs are ARM private.
- */
-#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
-#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
-#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
-#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
-#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
-#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
-
-/*
- * The following syscalls are obsolete and no longer available for EABI.
- */
-#if defined(__ARM_EABI__) && !defined(__KERNEL__)
-#undef __NR_time
-#undef __NR_umount
-#undef __NR_stime
-#undef __NR_alarm
-#undef __NR_utime
-#undef __NR_getrlimit
-#undef __NR_select
-#undef __NR_readdir
-#undef __NR_mmap
-#undef __NR_socketcall
-#undef __NR_syscall
-#undef __NR_ipc
-#endif
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_SYS_SOCKETCALL
-#endif
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-/*
- * Unimplemented (or alternatively implemented) syscalls
- */
-#define __IGNORE_fadvise64_64		1
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_UNISTD_H */
diff --git a/include/asm-arm/user.h b/include/asm-arm/user.h
deleted file mode 100644
index 825c1e7c582d..000000000000
--- a/include/asm-arm/user.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _ARM_USER_H
-#define _ARM_USER_H
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-struct user_fp {
-	struct fp_reg {
-		unsigned int sign1:1;
-		unsigned int unused:15;
-		unsigned int sign2:1;
-		unsigned int exponent:14;
-		unsigned int j:1;
-		unsigned int mantissa1:31;
-		unsigned int mantissa0:32;
-	} fpregs[8];
-	unsigned int fpsr:32;
-	unsigned int fpcr:32;
-	unsigned char ftype[8];
-	unsigned int init_flag;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct pt_regs regs;		/* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-  int u_fpvalid;		/* True if math co-processor being used. */
-                                /* for this mess. Not yet used. */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;	/* Text segment size (pages). */
-  unsigned long int u_dsize;	/* Data segment size (pages). */
-  unsigned long int u_ssize;	/* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  long int signal;     		/* Signal that caused the core dump. */
-  int reserved;			/* No longer used */
-  unsigned long u_ar0;		/* Used by gdb to help find the values for */
-				/* the registers. */
-  unsigned long magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-  int u_debugreg[8];
-  struct user_fp u_fp;		/* FP state */
-  struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
-  				/* the FP registers. */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ARM_USER_H */
diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h
deleted file mode 100644
index 5f9a2cb3d452..000000000000
--- a/include/asm-arm/vfp.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/include/asm-arm/vfp.h
- *
- * VFP register definitions.
- * First, the standard VFP set.
- */
-
-#define FPSID			cr0
-#define FPSCR			cr1
-#define MVFR1			cr6
-#define MVFR0			cr7
-#define FPEXC			cr8
-#define FPINST			cr9
-#define FPINST2			cr10
-
-/* FPSID bits */
-#define FPSID_IMPLEMENTER_BIT	(24)
-#define FPSID_IMPLEMENTER_MASK	(0xff << FPSID_IMPLEMENTER_BIT)
-#define FPSID_SOFTWARE		(1<<23)
-#define FPSID_FORMAT_BIT	(21)
-#define FPSID_FORMAT_MASK	(0x3  << FPSID_FORMAT_BIT)
-#define FPSID_NODOUBLE		(1<<20)
-#define FPSID_ARCH_BIT		(16)
-#define FPSID_ARCH_MASK		(0xF  << FPSID_ARCH_BIT)
-#define FPSID_PART_BIT		(8)
-#define FPSID_PART_MASK		(0xFF << FPSID_PART_BIT)
-#define FPSID_VARIANT_BIT	(4)
-#define FPSID_VARIANT_MASK	(0xF  << FPSID_VARIANT_BIT)
-#define FPSID_REV_BIT		(0)
-#define FPSID_REV_MASK		(0xF  << FPSID_REV_BIT)
-
-/* FPEXC bits */
-#define FPEXC_EX		(1 << 31)
-#define FPEXC_EN		(1 << 30)
-#define FPEXC_DEX		(1 << 29)
-#define FPEXC_FP2V		(1 << 28)
-#define FPEXC_VV		(1 << 27)
-#define FPEXC_TFV		(1 << 26)
-#define FPEXC_LENGTH_BIT	(8)
-#define FPEXC_LENGTH_MASK	(7 << FPEXC_LENGTH_BIT)
-#define FPEXC_IDF		(1 << 7)
-#define FPEXC_IXF		(1 << 4)
-#define FPEXC_UFF		(1 << 3)
-#define FPEXC_OFF		(1 << 2)
-#define FPEXC_DZF		(1 << 1)
-#define FPEXC_IOF		(1 << 0)
-#define FPEXC_TRAP_MASK		(FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF)
-
-/* FPSCR bits */
-#define FPSCR_DEFAULT_NAN	(1<<25)
-#define FPSCR_FLUSHTOZERO	(1<<24)
-#define FPSCR_ROUND_NEAREST	(0<<22)
-#define FPSCR_ROUND_PLUSINF	(1<<22)
-#define FPSCR_ROUND_MINUSINF	(2<<22)
-#define FPSCR_ROUND_TOZERO	(3<<22)
-#define FPSCR_RMODE_BIT		(22)
-#define FPSCR_RMODE_MASK	(3 << FPSCR_RMODE_BIT)
-#define FPSCR_STRIDE_BIT	(20)
-#define FPSCR_STRIDE_MASK	(3 << FPSCR_STRIDE_BIT)
-#define FPSCR_LENGTH_BIT	(16)
-#define FPSCR_LENGTH_MASK	(7 << FPSCR_LENGTH_BIT)
-#define FPSCR_IOE		(1<<8)
-#define FPSCR_DZE		(1<<9)
-#define FPSCR_OFE		(1<<10)
-#define FPSCR_UFE		(1<<11)
-#define FPSCR_IXE		(1<<12)
-#define FPSCR_IDE		(1<<15)
-#define FPSCR_IOC		(1<<0)
-#define FPSCR_DZC		(1<<1)
-#define FPSCR_OFC		(1<<2)
-#define FPSCR_UFC		(1<<3)
-#define FPSCR_IXC		(1<<4)
-#define FPSCR_IDC		(1<<7)
-
-/* MVFR0 bits */
-#define MVFR0_A_SIMD_BIT	(0)
-#define MVFR0_A_SIMD_MASK	(0xf << MVFR0_A_SIMD_BIT)
-
-/* Bit patterns for decoding the packaged operation descriptors */
-#define VFPOPDESC_LENGTH_BIT	(9)
-#define VFPOPDESC_LENGTH_MASK	(0x07 << VFPOPDESC_LENGTH_BIT)
-#define VFPOPDESC_UNUSED_BIT	(24)
-#define VFPOPDESC_UNUSED_MASK	(0xFF << VFPOPDESC_UNUSED_BIT)
-#define VFPOPDESC_OPDESC_MASK	(~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK))
diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h
deleted file mode 100644
index cccb3892e73c..000000000000
--- a/include/asm-arm/vfpmacros.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/asm-arm/vfpmacros.h
- *
- * Assembler-only file containing VFP macros and register definitions.
- */
-#include "vfp.h"
-
-@ Macros to allow building with old toolkits (with no VFP support)
-	.macro	VFPFMRX, rd, sysreg, cond
-	MRC\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMRX	\rd, \sysreg
-	.endm
-
-	.macro	VFPFMXR, sysreg, rd, cond
-	MCR\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMXR	\sysreg, \rd
-	.endm
-
-	@ read all the working registers back into the VFP
-	.macro	VFPFLDMIA, base, tmp
-#if __LINUX_ARM_ARCH__ < 6
-	LDC	p11, cr0, [\base],#33*4		    @ FLDMIAX \base!, {d0-d15}
-#else
-	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
-#endif
-#ifdef CONFIG_VFPv3
-	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
-	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
-	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
-#endif
-	.endm
-
-	@ write all the working registers out of the VFP
-	.macro	VFPFSTMIA, base, tmp
-#if __LINUX_ARM_ARCH__ < 6
-	STC	p11, cr0, [\base],#33*4		    @ FSTMIAX \base!, {d0-d15}
-#else
-	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
-#endif
-#ifdef CONFIG_VFPv3
-	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
-	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
-	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
-#endif
-	.endm
diff --git a/include/asm-arm/vga.h b/include/asm-arm/vga.h
deleted file mode 100644
index 1e0b913c3d71..000000000000
--- a/include/asm-arm/vga.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_VGA_H
-#define ASMARM_VGA_H
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
-
-#define vga_readb(x)	(*((volatile unsigned char *)x))
-#define vga_writeb(x,y)	(*((volatile unsigned char *)y) = (x))
-
-#endif
diff --git a/include/asm-arm/xor.h b/include/asm-arm/xor.h
deleted file mode 100644
index e7c4cf58bed1..000000000000
--- a/include/asm-arm/xor.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  linux/include/asm-arm/xor.h
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm-generic/xor.h>
-
-#define __XOR(a1, a2) a1 ^= a2
-
-#define GET_BLOCK_2(dst) \
-	__asm__("ldmia	%0, {%1, %2}" \
-		: "=r" (dst), "=r" (a1), "=r" (a2) \
-		: "0" (dst))
-
-#define GET_BLOCK_4(dst) \
-	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
-		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
-		: "0" (dst))
-
-#define XOR_BLOCK_2(src) \
-	__asm__("ldmia	%0!, {%1, %2}" \
-		: "=r" (src), "=r" (b1), "=r" (b2) \
-		: "0" (src)); \
-	__XOR(a1, b1); __XOR(a2, b2);
-
-#define XOR_BLOCK_4(src) \
-	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
-		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
-		: "0" (src)); \
-	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
-
-#define PUT_BLOCK_2(dst) \
-	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
-		: "=r" (dst) \
-		: "0" (dst), "r" (a1), "r" (a2))
-
-#define PUT_BLOCK_4(dst) \
-	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
-		: "=r" (dst) \
-		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
-
-static void
-xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-	register unsigned int a1 __asm__("r4");
-	register unsigned int a2 __asm__("r5");
-	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
-	register unsigned int b1 __asm__("r8");
-	register unsigned int b2 __asm__("r9");
-	register unsigned int b3 __asm__("ip");
-	register unsigned int b4 __asm__("lr");
-
-	do {
-		GET_BLOCK_4(p1);
-		XOR_BLOCK_4(p2);
-		PUT_BLOCK_4(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-	register unsigned int a1 __asm__("r4");
-	register unsigned int a2 __asm__("r5");
-	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
-	register unsigned int b1 __asm__("r8");
-	register unsigned int b2 __asm__("r9");
-	register unsigned int b3 __asm__("ip");
-	register unsigned int b4 __asm__("lr");
-
-	do {
-		GET_BLOCK_4(p1);
-		XOR_BLOCK_4(p2);
-		XOR_BLOCK_4(p3);
-		PUT_BLOCK_4(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-	register unsigned int a1 __asm__("r8");
-	register unsigned int a2 __asm__("r9");
-	register unsigned int b1 __asm__("ip");
-	register unsigned int b2 __asm__("lr");
-
-	do {
-		GET_BLOCK_2(p1);
-		XOR_BLOCK_2(p2);
-		XOR_BLOCK_2(p3);
-		XOR_BLOCK_2(p4);
-		PUT_BLOCK_2(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-	register unsigned int a1 __asm__("r8");
-	register unsigned int a2 __asm__("r9");
-	register unsigned int b1 __asm__("ip");
-	register unsigned int b2 __asm__("lr");
-
-	do {
-		GET_BLOCK_2(p1);
-		XOR_BLOCK_2(p2);
-		XOR_BLOCK_2(p3);
-		XOR_BLOCK_2(p4);
-		XOR_BLOCK_2(p5);
-		PUT_BLOCK_2(p1);
-	} while (--lines);
-}
-
-static struct xor_block_template xor_block_arm4regs = {
-	.name	= "arm4regs",
-	.do_2	= xor_arm4regs_2,
-	.do_3	= xor_arm4regs_3,
-	.do_4	= xor_arm4regs_4,
-	.do_5	= xor_arm4regs_5,
-};
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES			\
-	do {					\
-		xor_speed(&xor_block_arm4regs);	\
-		xor_speed(&xor_block_8regs);	\
-		xor_speed(&xor_block_32regs);	\
-	} while (0)
diff --git a/include/asm-avr32/Kbuild b/include/asm-avr32/Kbuild
deleted file mode 100644
index 3136628ba8d2..000000000000
--- a/include/asm-avr32/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y	+= cachectl.h
diff --git a/include/asm-avr32/a.out.h b/include/asm-avr32/a.out.h
deleted file mode 100644
index e46375a34a72..000000000000
--- a/include/asm-avr32/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_AVR32_A_OUT_H
-#define __ASM_AVR32_A_OUT_H
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* __ASM_AVR32_A_OUT_H */
diff --git a/include/asm-avr32/addrspace.h b/include/asm-avr32/addrspace.h
deleted file mode 100644
index 366794858ec7..000000000000
--- a/include/asm-avr32/addrspace.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Defitions for the address spaces of the AVR32 CPUs. Heavily based on
- * include/asm-sh/addrspace.h
- *
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_ADDRSPACE_H
-#define __ASM_AVR32_ADDRSPACE_H
-
-#ifdef CONFIG_MMU
-
-/* Memory segments when segmentation is enabled */
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-/* Returns the privileged segment base of a given address */
-#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
-
-/* Returns the physical address of a PnSEG (n=1,2) address */
-#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
-
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
-				      | P1SEG))
-#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
-				      | P2SEG))
-#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
-				      | P3SEG))
-#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
-				      | P4SEG))
-
-#endif /* CONFIG_MMU */
-
-#endif /* __ASM_AVR32_ADDRSPACE_H */
diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
index 31e48b0e7324..d18a3053be0d 100644
--- a/include/asm-avr32/arch-at32ap/at32ap700x.h
+++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
@@ -30,4 +30,20 @@
 #define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
 #define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
 
+
+/*
+ * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
+ */
+#define DMAC_MCI_RX		0
+#define DMAC_MCI_TX		1
+#define DMAC_DAC_TX		2
+#define DMAC_AC97_A_RX		3
+#define DMAC_AC97_A_TX		4
+#define DMAC_AC97_B_RX		5
+#define DMAC_AC97_B_TX		6
+#define DMAC_DMAREQ_0		7
+#define DMAC_DMAREQ_1		8
+#define DMAC_DMAREQ_2		9
+#define DMAC_DMAREQ_3		10
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index a3783861cdd2..e60e9076544d 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -82,7 +82,15 @@ struct mci_platform_data;
 struct platform_device *
 at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
 
-struct platform_device *at32_add_device_ac97c(unsigned int id);
+struct ac97c_platform_data {
+	unsigned short dma_rx_periph_id;
+	unsigned short dma_tx_periph_id;
+	unsigned short dma_controller_id;
+	int reset_pin;
+};
+struct platform_device *
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
+
 struct platform_device *at32_add_device_abdac(unsigned int id);
 struct platform_device *at32_add_device_psif(unsigned int id);
 
@@ -97,4 +105,17 @@ struct platform_device *
 at32_add_device_cf(unsigned int id, unsigned int extint,
 		struct cf_platform_data *data);
 
+/* NAND / SmartMedia */
+struct atmel_nand_data {
+	int	enable_pin;	/* chip enable */
+	int	det_pin;	/* card detect */
+	int	rdy_pin;	/* ready/busy */
+	u8	ale;		/* address line number connected to ALE */
+	u8	cle;		/* address line number connected to CLE */
+	u8	bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+};
+struct platform_device *
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
+
 #endif /* __ASM_ARCH_BOARD_H */
diff --git a/include/asm-avr32/asm.h b/include/asm-avr32/asm.h
deleted file mode 100644
index a2c64f404b98..000000000000
--- a/include/asm-avr32/asm.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_ASM_H__
-#define __ASM_AVR32_ASM_H__
-
-#include <asm/sysreg.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
-#define mask_interrupts		ssrf	SYSREG_GM_OFFSET
-#define mask_exceptions		ssrf	SYSREG_EM_OFFSET
-#define unmask_interrupts	csrf	SYSREG_GM_OFFSET
-#define unmask_exceptions	csrf	SYSREG_EM_OFFSET
-
-#ifdef CONFIG_FRAME_POINTER
-	.macro	save_fp
-	st.w	--sp, r7
-	.endm
-	.macro	restore_fp
-	ld.w	r7, sp++
-	.endm
-	.macro	zero_fp
-	mov	r7, 0
-	.endm
-#else
-	.macro	save_fp
-	.endm
-	.macro	restore_fp
-	.endm
-	.macro	zero_fp
-	.endm
-#endif
-	.macro	get_thread_info reg
-	mov	\reg, sp
-	andl	\reg, ~(THREAD_SIZE - 1) & 0xffff
-	.endm
-
-	/* Save and restore registers */
-	.macro	save_min sr, tmp=lr
-	pushm	lr
-	mfsr	\tmp, \sr
-	zero_fp
-	st.w	--sp, \tmp
-	.endm
-
-	.macro	restore_min sr, tmp=lr
-	ld.w	\tmp, sp++
-	mtsr	\sr, \tmp
-	popm	lr
-	.endm
-
-	.macro	save_half sr, tmp=lr
-	save_fp
-	pushm	r8-r9,r10,r11,r12,lr
-	zero_fp
-	mfsr	\tmp, \sr
-	st.w	--sp, \tmp
-	.endm
-
-	.macro	restore_half sr, tmp=lr
-	ld.w	\tmp, sp++
-	mtsr	\sr, \tmp
-	popm	r8-r9,r10,r11,r12,lr
-	restore_fp
-	.endm
-
-	.macro	save_full_user sr, tmp=lr
-	stmts	--sp, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr
-	st.w	--sp, lr
-	zero_fp
-	mfsr	\tmp, \sr
-	st.w	--sp, \tmp
-	.endm
-
-	.macro	restore_full_user sr, tmp=lr
-	ld.w	\tmp, sp++
-	mtsr	\sr, \tmp
-	ld.w	lr, sp++
-	ldmts	sp++, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr
-	.endm
-
-	/* uaccess macros */
-	.macro branch_if_kernel scratch, label
-	get_thread_info \scratch
-	ld.w	\scratch, \scratch[TI_flags]
-	bld	\scratch, TIF_USERSPACE
-	brcc	\label
-	.endm
-
-	.macro ret_if_privileged scratch, addr, size, ret
-	sub	\scratch, \size, 1
-	add	\scratch, \addr
-	retcs	\ret
-	retmi	\ret
-	.endm
-
-#endif /* __ASM_AVR32_ASM_H__ */
diff --git a/include/asm-avr32/atmel-mci.h b/include/asm-avr32/atmel-mci.h
deleted file mode 100644
index c2ea6e1c9aa1..000000000000
--- a/include/asm-avr32/atmel-mci.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_AVR32_ATMEL_MCI_H
-#define __ASM_AVR32_ATMEL_MCI_H
-
-struct mci_platform_data {
-	int			detect_pin;
-	int			wp_pin;
-};
-
-#endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/include/asm-avr32/atomic.h b/include/asm-avr32/atomic.h
deleted file mode 100644
index 7ef3862a73d0..000000000000
--- a/include/asm-avr32/atomic.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc.
- *
- * But use these as seldom as possible since they are slower than
- * regular operations.
- *
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_ATOMIC_H
-#define __ASM_AVR32_ATOMIC_H
-
-#include <asm/system.h>
-
-typedef struct { volatile int counter; } atomic_t;
-#define ATOMIC_INIT(i)  { (i) }
-
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = i)
-
-/*
- * atomic_sub_return - subtract the atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v. Returns the resulting value.
- */
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	int result;
-
-	asm volatile(
-		"/* atomic_sub_return */\n"
-		"1:	ssrf	5\n"
-		"	ld.w	%0, %2\n"
-		"	sub	%0, %3\n"
-		"	stcond	%1, %0\n"
-		"	brne	1b"
-		: "=&r"(result), "=o"(v->counter)
-		: "m"(v->counter), "rKs21"(i)
-		: "cc");
-
-	return result;
-}
-
-/*
- * atomic_add_return - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v. Returns the resulting value.
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int result;
-
-	if (__builtin_constant_p(i) && (i >= -1048575) && (i <= 1048576))
-		result = atomic_sub_return(-i, v);
-	else
-		asm volatile(
-			"/* atomic_add_return */\n"
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %1\n"
-			"	add	%0, %3\n"
-			"	stcond	%2, %0\n"
-			"	brne	1b"
-			: "=&r"(result), "=o"(v->counter)
-			: "m"(v->counter), "r"(i)
-			: "cc", "memory");
-
-	return result;
-}
-
-/*
- * atomic_sub_unless - sub unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * If the atomic value v is not equal to u, this function subtracts a
- * from v, and returns non zero. If v is equal to u then it returns
- * zero. This is done as an atomic operation.
-*/
-static inline int atomic_sub_unless(atomic_t *v, int a, int u)
-{
-	int tmp, result = 0;
-
-	asm volatile(
-		"/* atomic_sub_unless */\n"
-		"1:	ssrf	5\n"
-		"	ld.w	%0, %3\n"
-		"	cp.w	%0, %5\n"
-		"	breq	1f\n"
-		"	sub	%0, %4\n"
-		"	stcond	%2, %0\n"
-		"	brne	1b\n"
-		"	mov	%1, 1\n"
-		"1:"
-		: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
-		: "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
-		: "cc", "memory");
-
-	return result;
-}
-
-/*
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * If the atomic value v is not equal to u, this function adds a to v,
- * and returns non zero. If v is equal to u then it returns zero. This
- * is done as an atomic operation.
-*/
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int tmp, result;
-
-	if (__builtin_constant_p(a) && (a >= -1048575) && (a <= 1048576))
-		result = atomic_sub_unless(v, -a, u);
-	else {
-		result = 0;
-		asm volatile(
-			"/* atomic_add_unless */\n"
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %3\n"
-			"	cp.w	%0, %5\n"
-			"	breq	1f\n"
-			"	add	%0, %4\n"
-			"	stcond	%2, %0\n"
-			"	brne	1b\n"
-			"	mov	%1, 1\n"
-			"1:"
-			: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
-			: "m"(v->counter), "r"(a), "ir"(u), "1"(result)
-			: "cc", "memory");
-	}
-
-	return result;
-}
-
-/*
- * atomic_sub_if_positive - conditionally subtract integer from atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically test @v and subtract @i if @v is greater or equal than @i.
- * The function returns the old value of @v minus @i.
- */
-static inline int atomic_sub_if_positive(int i, atomic_t *v)
-{
-	int result;
-
-	asm volatile(
-		"/* atomic_sub_if_positive */\n"
-		"1:	ssrf	5\n"
-		"	ld.w	%0, %2\n"
-		"	sub	%0, %3\n"
-		"	brlt	1f\n"
-		"	stcond	%1, %0\n"
-		"	brne	1b\n"
-		"1:"
-		: "=&r"(result), "=o"(v->counter)
-		: "m"(v->counter), "ir"(i)
-		: "cc", "memory");
-
-	return result;
-}
-
-#define atomic_xchg(v, new)	(xchg(&((v)->counter), new))
-#define atomic_cmpxchg(v, o, n)	(cmpxchg(&((v)->counter), (o), (n)))
-
-#define atomic_sub(i, v)	(void)atomic_sub_return(i, v)
-#define atomic_add(i, v)	(void)atomic_add_return(i, v)
-#define atomic_dec(v)		atomic_sub(1, (v))
-#define atomic_inc(v)		atomic_add(1, (v))
-
-#define atomic_dec_return(v)	atomic_sub_return(1, v)
-#define atomic_inc_return(v)	atomic_add_return(1, v)
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
-#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
-#define atomic_add_negative(i, v) (atomic_add_return(i, v) < 0)
-
-#define atomic_inc_not_zero(v)	atomic_add_unless(v, 1, 0)
-#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v)
-
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-
-#endif /*  __ASM_AVR32_ATOMIC_H */
diff --git a/include/asm-avr32/auxvec.h b/include/asm-avr32/auxvec.h
deleted file mode 100644
index d5dd435bf8f4..000000000000
--- a/include/asm-avr32/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_AVR32_AUXVEC_H
-#define __ASM_AVR32_AUXVEC_H
-
-#endif /* __ASM_AVR32_AUXVEC_H */
diff --git a/include/asm-avr32/bitops.h b/include/asm-avr32/bitops.h
deleted file mode 100644
index 1a50b69b1a19..000000000000
--- a/include/asm-avr32/bitops.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_BITOPS_H
-#define __ASM_AVR32_BITOPS_H
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-/*
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered.  See __set_bit()
- * if you do not require the atomic guarantees.
- *
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void set_bit(int nr, volatile void * addr)
-{
-	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
-	unsigned long tmp;
-
-	if (__builtin_constant_p(nr)) {
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %2\n"
-			"	sbr	%0, %3\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p)
-			: "m"(*p), "i"(nr)
-			: "cc");
-	} else {
-		unsigned long mask = 1UL << (nr % BITS_PER_LONG);
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %2\n"
-			"	or	%0, %3\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p)
-			: "m"(*p), "r"(mask)
-			: "cc");
-	}
-}
-
-/*
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered.  However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static inline void clear_bit(int nr, volatile void * addr)
-{
-	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
-	unsigned long tmp;
-
-	if (__builtin_constant_p(nr)) {
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %2\n"
-			"	cbr	%0, %3\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p)
-			: "m"(*p), "i"(nr)
-			: "cc");
-	} else {
-		unsigned long mask = 1UL << (nr % BITS_PER_LONG);
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %2\n"
-			"	andn	%0, %3\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p)
-			: "m"(*p), "r"(mask)
-			: "cc");
-	}
-}
-
-/*
- * change_bit - Toggle a bit in memory
- * @nr: Bit to change
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static inline void change_bit(int nr, volatile void * addr)
-{
-	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
-	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
-	unsigned long tmp;
-
-	asm volatile(
-		"1:	ssrf	5\n"
-		"	ld.w	%0, %2\n"
-		"	eor	%0, %3\n"
-		"	stcond	%1, %0\n"
-		"	brne	1b"
-		: "=&r"(tmp), "=o"(*p)
-		: "m"(*p), "r"(mask)
-		: "cc");
-}
-
-/*
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_set_bit(int nr, volatile void * addr)
-{
-	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
-	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
-	unsigned long tmp, old;
-
-	if (__builtin_constant_p(nr)) {
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %3\n"
-			"	mov	%2, %0\n"
-			"	sbr	%0, %4\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p), "=&r"(old)
-			: "m"(*p), "i"(nr)
-			: "memory", "cc");
-	} else {
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%2, %3\n"
-			"	or	%0, %2, %4\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p), "=&r"(old)
-			: "m"(*p), "r"(mask)
-			: "memory", "cc");
-	}
-
-	return (old & mask) != 0;
-}
-
-/*
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_clear_bit(int nr, volatile void * addr)
-{
-	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
-	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
-	unsigned long tmp, old;
-
-	if (__builtin_constant_p(nr)) {
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %3\n"
-			"	mov	%2, %0\n"
-			"	cbr	%0, %4\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p), "=&r"(old)
-			: "m"(*p), "i"(nr)
-			: "memory", "cc");
-	} else {
-		asm volatile(
-			"1:	ssrf	5\n"
-			"	ld.w	%0, %3\n"
-			"	mov	%2, %0\n"
-			"	andn	%0, %4\n"
-			"	stcond	%1, %0\n"
-			"	brne	1b"
-			: "=&r"(tmp), "=o"(*p), "=&r"(old)
-			: "m"(*p), "r"(mask)
-			: "memory", "cc");
-	}
-
-	return (old & mask) != 0;
-}
-
-/*
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static inline int test_and_change_bit(int nr, volatile void * addr)
-{
-	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
-	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
-	unsigned long tmp, old;
-
-	asm volatile(
-		"1:	ssrf	5\n"
-		"	ld.w	%2, %3\n"
-		"	eor	%0, %2, %4\n"
-		"	stcond	%1, %0\n"
-		"	brne	1b"
-		: "=&r"(tmp), "=o"(*p), "=&r"(old)
-		: "m"(*p), "r"(mask)
-		: "memory", "cc");
-
-	return (old & mask) != 0;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-/* Find First bit Set */
-static inline unsigned long __ffs(unsigned long word)
-{
-	unsigned long result;
-
-	asm("brev %1\n\t"
-	    "clz %0,%1"
-	    : "=r"(result), "=&r"(word)
-	    : "1"(word));
-	return result;
-}
-
-/* Find First Zero */
-static inline unsigned long ffz(unsigned long word)
-{
-	return __ffs(~word);
-}
-
-/* Find Last bit Set */
-static inline int fls(unsigned long word)
-{
-	unsigned long result;
-
-	asm("clz %0,%1" : "=r"(result) : "r"(word));
-	return 32 - result;
-}
-
-unsigned long find_first_zero_bit(const unsigned long *addr,
-				  unsigned long size);
-unsigned long find_next_zero_bit(const unsigned long *addr,
-				 unsigned long size,
-				 unsigned long offset);
-unsigned long find_first_bit(const unsigned long *addr,
-			     unsigned long size);
-unsigned long find_next_bit(const unsigned long *addr,
-				 unsigned long size,
-				 unsigned long offset);
-
-/*
- * ffs: find first bit set. This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- *
- * The difference is that bit numbering starts at 1, and if no bit is set,
- * the function returns 0.
- */
-static inline int ffs(unsigned long word)
-{
-	if(word == 0)
-		return 0;
-	return __ffs(word) + 1;
-}
-
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/minix-le.h>
-
-#endif /* __ASM_AVR32_BITOPS_H */
diff --git a/include/asm-avr32/bug.h b/include/asm-avr32/bug.h
deleted file mode 100644
index 331d45bab18f..000000000000
--- a/include/asm-avr32/bug.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_BUG_H
-#define __ASM_AVR32_BUG_H
-
-#ifdef CONFIG_BUG
-
-/*
- * According to our Chief Architect, this compact opcode is very
- * unlikely to ever be implemented.
- */
-#define AVR32_BUG_OPCODE	0x5df0
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-
-#define _BUG_OR_WARN(flags)						\
-	asm volatile(							\
-		"1:	.hword	%0\n"					\
-		"	.section __bug_table,\"a\",@progbits\n"		\
-		"2:	.long	1b\n"					\
-		"	.long	%1\n"					\
-		"	.short	%2\n"					\
-		"	.short	%3\n"					\
-		"	.org	2b + %4\n"				\
-		"	.previous"					\
-		:							\
-		: "i"(AVR32_BUG_OPCODE), "i"(__FILE__),			\
-		  "i"(__LINE__), "i"(flags),				\
-		  "i"(sizeof(struct bug_entry)))
-
-#else
-
-#define _BUG_OR_WARN(flags)						\
-	asm volatile(							\
-		"1:	.hword	%0\n"					\
-		"	.section __bug_table,\"a\",@progbits\n"		\
-		"2:	.long	1b\n"					\
-		"	.short	%1\n"					\
-		"	.org	2b + %2\n"				\
-		"	.previous"					\
-		:							\
-		: "i"(AVR32_BUG_OPCODE), "i"(flags),			\
-		  "i"(sizeof(struct bug_entry)))
-
-#endif /* CONFIG_DEBUG_BUGVERBOSE */
-
-#define BUG()								\
-	do {								\
-		_BUG_OR_WARN(0);					\
-		for (;;);						\
-	} while (0)
-
-#define WARN_ON(condition)							\
-	({								\
-		int __ret_warn_on = !!(condition);			\
-		if (unlikely(__ret_warn_on))				\
-			_BUG_OR_WARN(BUGFLAG_WARNING);			\
-		unlikely(__ret_warn_on);				\
-	})
-
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_WARN_ON
-
-#endif /* CONFIG_BUG */
-
-#include <asm-generic/bug.h>
-
-#endif /* __ASM_AVR32_BUG_H */
diff --git a/include/asm-avr32/bugs.h b/include/asm-avr32/bugs.h
deleted file mode 100644
index 7635e770622e..000000000000
--- a/include/asm-avr32/bugs.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *      void check_bugs(void);
- */
-#ifndef __ASM_AVR32_BUGS_H
-#define __ASM_AVR32_BUGS_H
-
-static void __init check_bugs(void)
-{
-	cpu_data->loops_per_jiffy = loops_per_jiffy;
-}
-
-#endif /* __ASM_AVR32_BUGS_H */
diff --git a/include/asm-avr32/byteorder.h b/include/asm-avr32/byteorder.h
deleted file mode 100644
index d77b48ba7338..000000000000
--- a/include/asm-avr32/byteorder.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * AVR32 endian-conversion functions.
- */
-#ifndef __ASM_AVR32_BYTEORDER_H
-#define __ASM_AVR32_BYTEORDER_H
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#ifdef __CHECKER__
-extern unsigned long __builtin_bswap_32(unsigned long x);
-extern unsigned short __builtin_bswap_16(unsigned short x);
-#endif
-
-/*
- * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends
- * the result.
- */
-#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
-#define __arch__swab32(x) __builtin_bswap_32(x)
-#define __arch__swab16(x) __builtin_bswap_16(x)
-#endif
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/include/asm-avr32/cache.h b/include/asm-avr32/cache.h
deleted file mode 100644
index d3cf35ab11ab..000000000000
--- a/include/asm-avr32/cache.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef __ASM_AVR32_CACHE_H
-#define __ASM_AVR32_CACHE_H
-
-#define L1_CACHE_SHIFT 5
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-/*
- * Memory returned by kmalloc() may be used for DMA, so we must make
- * sure that all such allocations are cache aligned. Otherwise,
- * unrelated code may cause parts of the buffer to be read into the
- * cache before the transfer is done, causing old data to be seen by
- * the CPU.
- */
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
-
-#ifndef __ASSEMBLER__
-struct cache_info {
-	unsigned int ways;
-	unsigned int sets;
-	unsigned int linesz;
-};
-#endif /* __ASSEMBLER */
-
-/* Cache operation constants */
-#define ICACHE_FLUSH		0x00
-#define ICACHE_INVALIDATE	0x01
-#define ICACHE_LOCK		0x02
-#define ICACHE_UNLOCK		0x03
-#define ICACHE_PREFETCH		0x04
-
-#define DCACHE_FLUSH		0x08
-#define DCACHE_LOCK		0x09
-#define DCACHE_UNLOCK		0x0a
-#define DCACHE_INVALIDATE	0x0b
-#define DCACHE_CLEAN		0x0c
-#define DCACHE_CLEAN_INVAL	0x0d
-
-#endif /* __ASM_AVR32_CACHE_H */
diff --git a/include/asm-avr32/cachectl.h b/include/asm-avr32/cachectl.h
deleted file mode 100644
index 4faf1ce60061..000000000000
--- a/include/asm-avr32/cachectl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_AVR32_CACHECTL_H
-#define __ASM_AVR32_CACHECTL_H
-
-/*
- * Operations that can be performed through the cacheflush system call
- */
-
-/* Clean the data cache, then invalidate the icache */
-#define CACHE_IFLUSH	0
-
-#endif /* __ASM_AVR32_CACHECTL_H */
diff --git a/include/asm-avr32/cacheflush.h b/include/asm-avr32/cacheflush.h
deleted file mode 100644
index 670674749b20..000000000000
--- a/include/asm-avr32/cacheflush.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_CACHEFLUSH_H
-#define __ASM_AVR32_CACHEFLUSH_H
-
-/* Keep includes the same across arches.  */
-#include <linux/mm.h>
-
-#define CACHE_OP_ICACHE_INVALIDATE	0x01
-#define CACHE_OP_DCACHE_INVALIDATE	0x0b
-#define CACHE_OP_DCACHE_CLEAN		0x0c
-#define CACHE_OP_DCACHE_CLEAN_INVAL	0x0d
-
-/*
- * Invalidate any cacheline containing virtual address vaddr without
- * writing anything back to memory.
- *
- * Note that this function may corrupt unrelated data structures when
- * applied on buffers that are not cacheline aligned in both ends.
- */
-static inline void invalidate_dcache_line(void *vaddr)
-{
-	asm volatile("cache %0[0], %1"
-		     :
-		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_INVALIDATE)
-		     : "memory");
-}
-
-/*
- * Make sure any cacheline containing virtual address vaddr is written
- * to memory.
- */
-static inline void clean_dcache_line(void *vaddr)
-{
-	asm volatile("cache %0[0], %1"
-		     :
-		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN)
-		     : "memory");
-}
-
-/*
- * Make sure any cacheline containing virtual address vaddr is written
- * to memory and then invalidate it.
- */
-static inline void flush_dcache_line(void *vaddr)
-{
-	asm volatile("cache %0[0], %1"
-		     :
-		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN_INVAL)
-		     : "memory");
-}
-
-/*
- * Invalidate any instruction cacheline containing virtual address
- * vaddr.
- */
-static inline void invalidate_icache_line(void *vaddr)
-{
-	asm volatile("cache %0[0], %1"
-		     :
-		     : "r"(vaddr), "n"(CACHE_OP_ICACHE_INVALIDATE)
-		     : "memory");
-}
-
-/*
- * Applies the above functions on all lines that are touched by the
- * specified virtual address range.
- */
-void invalidate_dcache_region(void *start, size_t len);
-void clean_dcache_region(void *start, size_t len);
-void flush_dcache_region(void *start, size_t len);
-void invalidate_icache_region(void *start, size_t len);
-
-/*
- * Make sure any pending writes are completed before continuing.
- */
-#define flush_write_buffer() asm volatile("sync 0" : : : "memory")
-
-/*
- * The following functions are called when a virtual mapping changes.
- * We do not need to flush anything in this case.
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-/*
- * I think we need to implement this one to be able to reliably
- * execute pages from RAMDISK. However, if we implement the
- * flush_dcache_*() functions, it might not be needed anymore.
- *
- * #define flush_icache_page(vma, page)		do { } while (0)
- */
-extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-
-/*
- * These are (I think) related to D-cache aliasing.  We might need to
- * do something here, but only for certain configurations.  No such
- * configurations exist at this time.
- */
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(page)		do { } while (0)
-#define flush_dcache_mmap_unlock(page)		do { } while (0)
-
-/*
- * These are for I/D cache coherency. In this case, we do need to
- * flush with all configurations.
- */
-extern void flush_icache_range(unsigned long start, unsigned long end);
-
-extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		unsigned long vaddr, void *dst, const void *src,
-		unsigned long len);
-
-static inline void copy_from_user_page(struct vm_area_struct *vma,
-		struct page *page, unsigned long vaddr, void *dst,
-		const void *src, unsigned long len)
-{
-	memcpy(dst, src, len);
-}
-
-#endif /* __ASM_AVR32_CACHEFLUSH_H */
diff --git a/include/asm-avr32/checksum.h b/include/asm-avr32/checksum.h
deleted file mode 100644
index 4ddbfd2486af..000000000000
--- a/include/asm-avr32/checksum.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_CHECKSUM_H
-#define __ASM_AVR32_CHECKSUM_H
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-__wsum csum_partial_copy_generic(const void *src, void *dst, int len,
-				       __wsum sum, int *src_err_ptr,
-				       int *dst_err_ptr);
-
-/*
- *	Note: when you get a NULL pointer exception here this means someone
- *	passed in an incorrect kernel address to one of these functions.
- *
- *	If you use these functions directly please don't forget the
- *	access_ok().
- */
-static inline
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-				       int len, __wsum sum)
-{
-	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
-}
-
-static inline
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					  int len, __wsum sum, int *err_ptr)
-{
-	return csum_partial_copy_generic((const void __force *)src, dst, len,
-					 sum, err_ptr, NULL);
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int sum, tmp;
-
-	__asm__ __volatile__(
-		"	ld.w	%0, %1++\n"
-		"	ld.w	%3, %1++\n"
-		"	sub	%2, 4\n"
-		"	add	%0, %3\n"
-		"	ld.w	%3, %1++\n"
-		"	adc	%0, %0, %3\n"
-		"	ld.w	%3, %1++\n"
-		"	adc	%0, %0, %3\n"
-		"	acr	%0\n"
-		"1:	ld.w	%3, %1++\n"
-		"	add	%0, %3\n"
-		"	acr	%0\n"
-		"	sub	%2, 1\n"
-		"	brne	1b\n"
-		"	lsl	%3, %0, 16\n"
-		"	andl	%0, 0\n"
-		"	mov	%2, 0xffff\n"
-		"	add	%0, %3\n"
-		"	adc	%0, %0, %2\n"
-		"	com	%0\n"
-		"	lsr	%0, 16\n"
-		: "=r"(sum), "=r"(iph), "=r"(ihl), "=r"(tmp)
-		: "1"(iph), "2"(ihl)
-		: "memory", "cc");
-	return (__force __sum16)sum;
-}
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp;
-
-	asm("	bfextu	%1, %0, 0, 16\n"
-	    "	lsr	%0, 16\n"
-	    "	add	%0, %1\n"
-	    "	bfextu	%1, %0, 16, 16\n"
-	    "	add	%0, %1"
-	    : "=&r"(sum), "=&r"(tmp)
-	    : "0"(sum));
-
-	return (__force __sum16)~sum;
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					       unsigned short len,
-					       unsigned short proto,
-					       __wsum sum)
-{
-	asm("	add	%0, %1\n"
-	    "	adc	%0, %0, %2\n"
-	    "	adc	%0, %0, %3\n"
-	    "	acr	%0"
-	    : "=r"(sum)
-	    : "r"(daddr), "r"(saddr), "r"(len + proto),
-	      "0"(sum)
-	    : "cc");
-
-	return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-    return csum_fold(csum_partial(buff, len, 0));
-}
-
-#endif /* __ASM_AVR32_CHECKSUM_H */
diff --git a/include/asm-avr32/cputime.h b/include/asm-avr32/cputime.h
deleted file mode 100644
index e87e0f81cbeb..000000000000
--- a/include/asm-avr32/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_CPUTIME_H
-#define __ASM_AVR32_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ASM_AVR32_CPUTIME_H */
diff --git a/include/asm-avr32/current.h b/include/asm-avr32/current.h
deleted file mode 100644
index c7b0549eab8a..000000000000
--- a/include/asm-avr32/current.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_AVR32_CURRENT_H
-#define __ASM_AVR32_CURRENT_H
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-inline static struct task_struct * get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current get_current()
-
-#endif /* __ASM_AVR32_CURRENT_H */
diff --git a/include/asm-avr32/delay.h b/include/asm-avr32/delay.h
deleted file mode 100644
index a0ed9a9839a5..000000000000
--- a/include/asm-avr32/delay.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_AVR32_DELAY_H
-#define __ASM_AVR32_DELAY_H
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines calling functions in arch/avr32/lib/delay.c
- */
-
-extern void __bad_udelay(void);
-extern void __bad_ndelay(void);
-
-extern void __udelay(unsigned long usecs);
-extern void __ndelay(unsigned long nsecs);
-extern void __const_udelay(unsigned long xloops);
-extern void __delay(unsigned long loops);
-
-#define udelay(n) (__builtin_constant_p(n) ? \
-	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
-	__udelay(n))
-
-#define ndelay(n) (__builtin_constant_p(n) ? \
-	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
-	__ndelay(n))
-
-#endif /* __ASM_AVR32_DELAY_H */
diff --git a/include/asm-avr32/device.h b/include/asm-avr32/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-avr32/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-avr32/div64.h b/include/asm-avr32/div64.h
deleted file mode 100644
index d7ddd4fdeca6..000000000000
--- a/include/asm-avr32/div64.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_DIV64_H
-#define __ASM_AVR32_DIV64_H
-
-#include <asm-generic/div64.h>
-
-#endif /* __ASM_AVR32_DIV64_H */
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
deleted file mode 100644
index 57dc672bab8e..000000000000
--- a/include/asm-avr32/dma-mapping.h
+++ /dev/null
@@ -1,349 +0,0 @@
-#ifndef __ASM_AVR32_DMA_MAPPING_H
-#define __ASM_AVR32_DMA_MAPPING_H
-
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/scatterlist.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-	int direction);
-
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- */
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	/* Fix when needed. I really don't know of any limitations */
-	return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-	return 0;
-}
-
-/*
- * dma_map_single can't fail as it is implemented now.
- */
-static inline int dma_mapping_error(dma_addr_t addr)
-{
-	return 0;
-}
-
-/**
- * dma_alloc_coherent - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, unbuffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_coherent
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_coherent().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void dma_free_coherent(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t handle);
-
-/**
- * dma_alloc_writecombine - allocate write-combining memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, buffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_writecombine(struct device *dev, size_t size,
-				    dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_writecombine
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_writecombine
- * @cpu_addr: CPU-view address returned from dma_alloc_writecombine
- * @handle: device-view address returned from dma_alloc_writecombine
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_writecombine().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void dma_free_writecombine(struct device *dev, size_t size,
-				  void *cpu_addr, dma_addr_t handle);
-
-/**
- * dma_map_single - map a single buffer for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @cpu_addr: CPU direct mapped address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_single() or dma_sync_single().
- */
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-	       enum dma_data_direction direction)
-{
-	dma_cache_sync(dev, cpu_addr, size, direction);
-	return virt_to_bus(cpu_addr);
-}
-
-/**
- * dma_unmap_single - unmap a single buffer previously mapped
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		 enum dma_data_direction direction)
-{
-
-}
-
-/**
- * dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page() or dma_sync_single().
- */
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction direction)
-{
-	return dma_map_single(dev, page_address(page) + offset,
-			      size, direction);
-}
-
-/**
- * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	       enum dma_data_direction direction)
-{
-	dma_unmap_single(dev, dma_address, size, direction);
-}
-
-/**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scatter-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction direction)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-		char *virt;
-
-		sg[i].dma_address = page_to_bus(sg_page(&sg[i])) + sg[i].offset;
-		virt = sg_virt(&sg[i]);
-		dma_cache_sync(dev, virt, sg[i].length, direction);
-	}
-
-	return nents;
-}
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Unmap a set of streaming mode DMA translations.
- * Again, CPU read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	     enum dma_data_direction direction)
-{
-
-}
-
-/**
- * dma_sync_single_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a single streaming mode DMA
- * translation after a transfer.
- *
- * If you perform a dma_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the DMA mapping,
- * you must call this function before doing so.  At the next point you
- * give the DMA address back to the card, you must first perform a
- * dma_sync_single_for_device, and then the device again owns the
- * buffer.
- */
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			size_t size, enum dma_data_direction direction)
-{
-	/*
-	 * No need to do anything since the CPU isn't supposed to
-	 * touch this memory after we flushed it at mapping- or
-	 * sync-for-device time.
-	 */
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-			   size_t size, enum dma_data_direction direction)
-{
-	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction direction)
-{
-	/* just sync everything, that's all the pci API can do */
-	dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
-{
-	/* just sync everything, that's all the pci API can do */
-	dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
-}
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as dma_sync_single_for_* but for a scatter-gather list,
- * same rules and usage.
- */
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-		    int nents, enum dma_data_direction direction)
-{
-	/*
-	 * No need to do anything since the CPU isn't supposed to
-	 * touch this memory after we flushed it at mapping- or
-	 * sync-for-device time.
-	 */
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-		       int nents, enum dma_data_direction direction)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, direction);
-	}
-}
-
-/* Now for the API extensions over the pci_ one */
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
-	return 1;
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	return boot_cpu_data.dcache.linesz;
-}
-
-#endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/include/asm-avr32/dma.h b/include/asm-avr32/dma.h
deleted file mode 100644
index 9e91205590ac..000000000000
--- a/include/asm-avr32/dma.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_AVR32_DMA_H
-#define __ASM_AVR32_DMA_H
-
-/* The maximum address that we can perform a DMA transfer to on this platform.
- * Not really applicable to AVR32, but some functions need it. */
-#define MAX_DMA_ADDRESS		0xffffffff
-
-#endif /* __ASM_AVR32_DMA_H */
diff --git a/include/asm-avr32/elf.h b/include/asm-avr32/elf.h
deleted file mode 100644
index 64ce40ee1d58..000000000000
--- a/include/asm-avr32/elf.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __ASM_AVR32_ELF_H
-#define __ASM_AVR32_ELF_H
-
-/* AVR32 relocation numbers */
-#define R_AVR32_NONE		0
-#define R_AVR32_32		1
-#define R_AVR32_16		2
-#define R_AVR32_8		3
-#define R_AVR32_32_PCREL	4
-#define R_AVR32_16_PCREL	5
-#define R_AVR32_8_PCREL		6
-#define R_AVR32_DIFF32		7
-#define R_AVR32_DIFF16		8
-#define R_AVR32_DIFF8		9
-#define R_AVR32_GOT32		10
-#define R_AVR32_GOT16		11
-#define R_AVR32_GOT8		12
-#define R_AVR32_21S		13
-#define R_AVR32_16U		14
-#define R_AVR32_16S		15
-#define R_AVR32_8S		16
-#define R_AVR32_8S_EXT		17
-#define R_AVR32_22H_PCREL	18
-#define R_AVR32_18W_PCREL	19
-#define R_AVR32_16B_PCREL	20
-#define R_AVR32_16N_PCREL	21
-#define R_AVR32_14UW_PCREL	22
-#define R_AVR32_11H_PCREL	23
-#define R_AVR32_10UW_PCREL	24
-#define R_AVR32_9H_PCREL	25
-#define R_AVR32_9UW_PCREL	26
-#define R_AVR32_HI16		27
-#define R_AVR32_LO16		28
-#define R_AVR32_GOTPC		29
-#define R_AVR32_GOTCALL		30
-#define R_AVR32_LDA_GOT		31
-#define R_AVR32_GOT21S		32
-#define R_AVR32_GOT18SW		33
-#define R_AVR32_GOT16S		34
-#define R_AVR32_GOT7UW		35
-#define R_AVR32_32_CPENT	36
-#define R_AVR32_CPCALL		37
-#define R_AVR32_16_CP		38
-#define R_AVR32_9W_CP		39
-#define R_AVR32_RELATIVE	40
-#define R_AVR32_GLOB_DAT	41
-#define R_AVR32_JMP_SLOT	42
-#define R_AVR32_ALIGN		43
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof (elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ( (x)->e_machine == EM_AVR32 )
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA	ELFDATA2LSB
-#else
-#define ELF_DATA	ELFDATA2MSB
-#endif
-#define ELF_ARCH	EM_AVR32
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
-
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This could be done in user space,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM  (NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-
-#endif /* __ASM_AVR32_ELF_H */
diff --git a/include/asm-avr32/emergency-restart.h b/include/asm-avr32/emergency-restart.h
deleted file mode 100644
index 3e7e014776ba..000000000000
--- a/include/asm-avr32/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
-#define __ASM_AVR32_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */
diff --git a/include/asm-avr32/errno.h b/include/asm-avr32/errno.h
deleted file mode 100644
index 558a7249f06d..000000000000
--- a/include/asm-avr32/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_ERRNO_H
-#define __ASM_AVR32_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_AVR32_ERRNO_H */
diff --git a/include/asm-avr32/fb.h b/include/asm-avr32/fb.h
deleted file mode 100644
index 41baf84ad402..000000000000
--- a/include/asm-avr32/fb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
-				      & ~_PAGE_CACHABLE)
-				     | (_PAGE_BUFFER | _PAGE_DIRTY));
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-avr32/fcntl.h b/include/asm-avr32/fcntl.h
deleted file mode 100644
index 14c0c4402b11..000000000000
--- a/include/asm-avr32/fcntl.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_FCNTL_H
-#define __ASM_AVR32_FCNTL_H
-
-#include <asm-generic/fcntl.h>
-
-#endif /* __ASM_AVR32_FCNTL_H */
diff --git a/include/asm-avr32/futex.h b/include/asm-avr32/futex.h
deleted file mode 100644
index 10419f14a68a..000000000000
--- a/include/asm-avr32/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_FUTEX_H
-#define __ASM_AVR32_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif /* __ASM_AVR32_FUTEX_H */
diff --git a/include/asm-avr32/gpio.h b/include/asm-avr32/gpio.h
deleted file mode 100644
index 19e8ccc77db3..000000000000
--- a/include/asm-avr32/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_GPIO_H
-#define __ASM_AVR32_GPIO_H
-
-#include <asm/arch/gpio.h>
-
-#endif /* __ASM_AVR32_GPIO_H */
diff --git a/include/asm-avr32/hardirq.h b/include/asm-avr32/hardirq.h
deleted file mode 100644
index 267354356f60..000000000000
--- a/include/asm-avr32/hardirq.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_AVR32_HARDIRQ_H
-#define __ASM_AVR32_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-void ack_bad_irq(unsigned int irq);
-
-/* Standard mappings for irq_cpustat_t above */
-#include <linux/irq_cpustat.h>
-
-#endif /* __ASSEMBLY__ */
-
-#define HARDIRQ_BITS	12
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#endif /* __ASM_AVR32_HARDIRQ_H */
diff --git a/include/asm-avr32/hw_irq.h b/include/asm-avr32/hw_irq.h
deleted file mode 100644
index 218b0a6bfd1b..000000000000
--- a/include/asm-avr32/hw_irq.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_AVR32_HW_IRQ_H
-#define __ASM_AVR32_HW_IRQ_H
-
-static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
-{
-	/* Nothing to do */
-}
-
-#endif /* __ASM_AVR32_HW_IRQ_H */
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
deleted file mode 100644
index 8be7ea9c9047..000000000000
--- a/include/asm-avr32/io.h
+++ /dev/null
@@ -1,312 +0,0 @@
-#ifndef __ASM_AVR32_IO_H
-#define __ASM_AVR32_IO_H
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <asm/arch/io.h>
-
-/* virt_to_phys will only work when address is in P1 or P2 */
-static __inline__ unsigned long virt_to_phys(volatile void *address)
-{
-	return PHYSADDR(address);
-}
-
-static __inline__ void * phys_to_virt(unsigned long address)
-{
-	return (void *)P1SEGADDR(address);
-}
-
-#define cached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
-#define uncached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
-#define phys_to_cached(addr)	((void *)P1SEGADDR(addr))
-#define phys_to_uncached(addr)	((void *)P2SEGADDR(addr))
-
-/*
- * Generic IO read/write.  These perform native-endian accesses.  Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
-extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
-extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
-extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-
-extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
-extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
-extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
-{
-	*(volatile u8 __force *)addr = v;
-}
-static inline void __raw_writew(u16 v, volatile void __iomem *addr)
-{
-	*(volatile u16 __force *)addr = v;
-}
-static inline void __raw_writel(u32 v, volatile void __iomem *addr)
-{
-	*(volatile u32 __force *)addr = v;
-}
-
-static inline u8 __raw_readb(const volatile void __iomem *addr)
-{
-	return *(const volatile u8 __force *)addr;
-}
-static inline u16 __raw_readw(const volatile void __iomem *addr)
-{
-	return *(const volatile u16 __force *)addr;
-}
-static inline u32 __raw_readl(const volatile void __iomem *addr)
-{
-	return *(const volatile u32 __force *)addr;
-}
-
-/* Convert I/O port address to virtual address */
-#ifndef __io
-# define __io(p)	((void *)phys_to_uncached(p))
-#endif
-
-/*
- * Not really sure about the best way to slow down I/O on
- * AVR32. Defining it as a no-op until we have an actual test case.
- */
-#define SLOW_DOWN_IO	do { } while (0)
-
-#define __BUILD_MEMORY_SINGLE(pfx, bwl, type)				\
-static inline void							\
-pfx##write##bwl(type val, volatile void __iomem *addr)			\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
-	__val = pfx##ioswab##bwl(__addr, val);				\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	*__addr = __val;						\
-}									\
-									\
-static inline type pfx##read##bwl(const volatile void __iomem *addr)	\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	__val = *__addr;						\
-	return pfx##ioswab##bwl(__addr, __val);				\
-}
-
-#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow)			\
-static inline void pfx##out##bwl##p(type val, unsigned long port)	\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = __io(__swizzle_addr_##bwl(port));			\
-	__val = pfx##ioswab##bwl(__addr, val);				\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	*__addr = __val;						\
-	slow;								\
-}									\
-									\
-static inline type pfx##in##bwl##p(unsigned long port)			\
-{									\
-	volatile type *__addr;						\
-	type __val;							\
-									\
-	__addr = __io(__swizzle_addr_##bwl(port));			\
-									\
-	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
-									\
-	__val = *__addr;						\
-	slow;								\
-									\
-	return pfx##ioswab##bwl(__addr, __val);				\
-}
-
-#define __BUILD_MEMORY_PFX(bus, bwl, type)				\
-	__BUILD_MEMORY_SINGLE(bus, bwl, type)
-
-#define BUILDIO_MEM(bwl, type)						\
-	__BUILD_MEMORY_PFX(, bwl, type)					\
-	__BUILD_MEMORY_PFX(__mem_, bwl, type)
-
-#define __BUILD_IOPORT_PFX(bus, bwl, type)				\
-	__BUILD_IOPORT_SINGLE(bus, bwl, type, ,)			\
-	__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
-
-#define BUILDIO_IOPORT(bwl, type)					\
-	__BUILD_IOPORT_PFX(, bwl, type)					\
-	__BUILD_IOPORT_PFX(__mem_, bwl, type)
-
-BUILDIO_MEM(b, u8)
-BUILDIO_MEM(w, u16)
-BUILDIO_MEM(l, u32)
-
-BUILDIO_IOPORT(b, u8)
-BUILDIO_IOPORT(w, u16)
-BUILDIO_IOPORT(l, u32)
-
-#define readb_relaxed			readb
-#define readw_relaxed			readw
-#define readl_relaxed			readl
-
-#define __BUILD_MEMORY_STRING(bwl, type)				\
-static inline void writes##bwl(volatile void __iomem *addr,		\
-			       const void *data, unsigned int count)	\
-{									\
-	const type *__data = data;					\
-									\
-	while (count--)							\
-		__mem_write##bwl(*__data++, addr);			\
-}									\
-									\
-static inline void reads##bwl(const volatile void __iomem *addr,	\
-			      void *data, unsigned int count)		\
-{									\
-	type *__data = data;						\
-									\
-	while (count--)							\
-		*__data++ = __mem_read##bwl(addr);			\
-}
-
-#define __BUILD_IOPORT_STRING(bwl, type)				\
-static inline void outs##bwl(unsigned long port, const void *data,	\
-			     unsigned int count)			\
-{									\
-	const type *__data = data;					\
-									\
-	while (count--)							\
-		__mem_out##bwl(*__data++, port);			\
-}									\
-									\
-static inline void ins##bwl(unsigned long port, void *data,		\
-			   unsigned int count)				\
-{									\
-	type *__data = data;						\
-									\
-	while (count--)							\
-		*__data++ = __mem_in##bwl(port);			\
-}
-
-#define BUILDSTRING(bwl, type)						\
-	__BUILD_MEMORY_STRING(bwl, type)				\
-	__BUILD_IOPORT_STRING(bwl, type)
-
-BUILDSTRING(b, u8)
-BUILDSTRING(w, u16)
-BUILDSTRING(l, u32)
-
-/*
- * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
- */
-#ifndef ioread8
-
-#define ioread8(p)		((unsigned int)readb(p))
-
-#define ioread16(p)		((unsigned int)readw(p))
-#define ioread16be(p)		((unsigned int)__raw_readw(p))
-
-#define ioread32(p)		((unsigned int)readl(p))
-#define ioread32be(p)		((unsigned int)__raw_readl(p))
-
-#define iowrite8(v,p)		writeb(v, p)
-
-#define iowrite16(v,p)		writew(v, p)
-#define iowrite16be(v,p)	__raw_writew(v, p)
-
-#define iowrite32(v,p)		writel(v, p)
-#define iowrite32be(v,p)	__raw_writel(v, p)
-
-#define ioread8_rep(p,d,c)	readsb(p,d,c)
-#define ioread16_rep(p,d,c)	readsw(p,d,c)
-#define ioread32_rep(p,d,c)	readsl(p,d,c)
-
-#define iowrite8_rep(p,s,c)	writesb(p,s,c)
-#define iowrite16_rep(p,s,c)	writesw(p,s,c)
-#define iowrite32_rep(p,s,c)	writesl(p,s,c)
-
-#endif
-
-static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
-				 unsigned long count)
-{
-	memcpy(to, (const void __force *)from, count);
-}
-
-static inline void  memcpy_toio(volatile void __iomem *to, const void * from,
-				unsigned long count)
-{
-	memcpy((void __force *)to, from, count);
-}
-
-static inline void memset_io(volatile void __iomem *addr, unsigned char val,
-			     unsigned long count)
-{
-	memset((void __force *)addr, val, count);
-}
-
-#define mmiowb()
-
-#define IO_SPACE_LIMIT	0xffffffff
-
-extern void __iomem *__ioremap(unsigned long offset, size_t size,
-			       unsigned long flags);
-extern void __iounmap(void __iomem *addr);
-
-/*
- * ioremap	-   map bus memory into CPU space
- * @offset	bus address of the memory
- * @size	size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to make
- * bus memory CPU accessible via the readb/.../writel functions and
- * the other mmio helpers. The returned address is not guaranteed to
- * be usable directly as a virtual address.
- */
-#define ioremap(offset, size)			\
-	__ioremap((offset), (size), 0)
-
-#define ioremap_nocache(offset, size)		\
-	__ioremap((offset), (size), 0)
-
-#define iounmap(addr)				\
-	__iounmap(addr)
-
-#define cached(addr) P1SEGADDR(addr)
-#define uncached(addr) P2SEGADDR(addr)
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-#define page_to_bus page_to_phys
-#define bus_to_page phys_to_page
-
-/*
- * Create a virtual mapping cookie for an IO port range.  There exists
- * no such thing as port-based I/O on AVR32, so a regular ioremap()
- * should do what we need.
- */
-#define ioport_map(port, nr)	ioremap(port, nr)
-#define ioport_unmap(port)	iounmap(port)
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)    __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)   p
-
-#endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-avr32/ioctl.h b/include/asm-avr32/ioctl.h
deleted file mode 100644
index c8472c1398ef..000000000000
--- a/include/asm-avr32/ioctl.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_IOCTL_H
-#define __ASM_AVR32_IOCTL_H
-
-#include <asm-generic/ioctl.h>
-
-#endif /* __ASM_AVR32_IOCTL_H */
diff --git a/include/asm-avr32/ioctls.h b/include/asm-avr32/ioctls.h
deleted file mode 100644
index 0500426b7186..000000000000
--- a/include/asm-avr32/ioctls.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef __ASM_AVR32_IOCTLS_H
-#define __ASM_AVR32_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/include/asm-avr32/ipcbuf.h b/include/asm-avr32/ipcbuf.h
deleted file mode 100644
index 1552c9698f5e..000000000000
--- a/include/asm-avr32/ipcbuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_AVR32_IPCBUF_H
-#define __ASM_AVR32_IPCBUF_H
-
-/*
-* The user_ipc_perm structure for AVR32 architecture.
-* Note extra padding because this structure is passed back and forth
-* between kernel and user space.
-*
-* Pad space is left for:
-* - 32-bit mode_t and seq
-* - 2 miscellaneous 32-bit values
-*/
-
-struct ipc64_perm
-{
-        __kernel_key_t          key;
-        __kernel_uid32_t        uid;
-        __kernel_gid32_t        gid;
-        __kernel_uid32_t        cuid;
-        __kernel_gid32_t        cgid;
-        __kernel_mode_t         mode;
-        unsigned short          __pad1;
-        unsigned short          seq;
-        unsigned short          __pad2;
-        unsigned long           __unused1;
-        unsigned long           __unused2;
-};
-
-#endif /* __ASM_AVR32_IPCBUF_H */
diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h
deleted file mode 100644
index c563b7720c1a..000000000000
--- a/include/asm-avr32/irq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __ASM_AVR32_IRQ_H
-#define __ASM_AVR32_IRQ_H
-
-#define NR_INTERNAL_IRQS	64
-
-#include <asm/arch/irq.h>
-
-#ifndef NR_IRQS
-#define NR_IRQS			(NR_INTERNAL_IRQS)
-#endif
-
-#define irq_canonicalize(i)	(i)
-
-#ifndef __ASSEMBLER__
-int nmi_enable(void);
-void nmi_disable(void);
-
-/*
- * Returns a bitmask of pending interrupts in a group.
- */
-extern unsigned long intc_get_pending(unsigned int group);
-#endif
-
-#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/include/asm-avr32/irq_regs.h b/include/asm-avr32/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-avr32/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-avr32/irqflags.h b/include/asm-avr32/irqflags.h
deleted file mode 100644
index 93570daac38a..000000000000
--- a/include/asm-avr32/irqflags.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_IRQFLAGS_H
-#define __ASM_AVR32_IRQFLAGS_H
-
-#include <asm/sysreg.h>
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	return sysreg_read(SR);
-}
-
-#define raw_local_save_flags(x)					\
-	do { (x) = __raw_local_save_flags(); } while (0)
-
-/*
- * This will restore ALL status register flags, not only the interrupt
- * mask flag.
- *
- * The empty asm statement informs the compiler of this fact while
- * also serving as a barrier.
- */
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	sysreg_write(SR, flags);
-	asm volatile("" : : : "memory", "cc");
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
-}
-
-static inline void raw_local_irq_enable(void)
-{
-	asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags & SYSREG_BIT(GM)) != 0;
-}
-
-static inline int raw_irqs_disabled(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_disable();
-
-	return flags;
-}
-
-#define raw_local_irq_save(flags)				\
-	do { (flags) = __raw_local_irq_save(); } while (0)
-
-#endif /* __ASM_AVR32_IRQFLAGS_H */
diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h
deleted file mode 100644
index ca4f9542365a..000000000000
--- a/include/asm-avr32/kdebug.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_AVR32_KDEBUG_H
-#define __ASM_AVR32_KDEBUG_H
-
-/* Grossly misnamed. */
-enum die_val {
-	DIE_BREAKPOINT,
-	DIE_SSTEP,
-	DIE_NMI,
-};
-
-#endif /* __ASM_AVR32_KDEBUG_H */
diff --git a/include/asm-avr32/kmap_types.h b/include/asm-avr32/kmap_types.h
deleted file mode 100644
index b7f5c6870107..000000000000
--- a/include/asm-avr32/kmap_types.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __ASM_AVR32_KMAP_TYPES_H
-#define __ASM_AVR32_KMAP_TYPES_H
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
-#endif
-
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_PTE2,
-D(10)	KM_IRQ0,
-D(11)	KM_IRQ1,
-D(12)	KM_SOFTIRQ0,
-D(13)	KM_SOFTIRQ1,
-D(14)	KM_TYPE_NR
-};
-
-#undef D
-
-#endif /* __ASM_AVR32_KMAP_TYPES_H */
diff --git a/include/asm-avr32/kprobes.h b/include/asm-avr32/kprobes.h
deleted file mode 100644
index 996cb656474e..000000000000
--- a/include/asm-avr32/kprobes.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Kernel Probes (KProbes)
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_KPROBES_H
-#define __ASM_AVR32_KPROBES_H
-
-#include <linux/types.h>
-
-typedef u16	kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION	0xd673	/* breakpoint */
-#define MAX_INSN_SIZE		2
-
-#define kretprobe_blacklist_size 0
-
-#define arch_remove_kprobe(p)	do { } while (0)
-
-/* Architecture specific copy of original instruction */
-struct arch_specific_insn {
-	kprobe_opcode_t	insn[MAX_INSN_SIZE];
-};
-
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-				    unsigned long val, void *data);
-
-#define flush_insn_slot(p)	do { } while (0)
-
-#endif /* __ASM_AVR32_KPROBES_H */
diff --git a/include/asm-avr32/kvm.h b/include/asm-avr32/kvm.h
deleted file mode 100644
index 8c5777020e2c..000000000000
--- a/include/asm-avr32/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_AVR32_H
-#define __LINUX_KVM_AVR32_H
-
-/* avr32 does not support KVM */
-
-#endif
diff --git a/include/asm-avr32/linkage.h b/include/asm-avr32/linkage.h
deleted file mode 100644
index f7b285e910d4..000000000000
--- a/include/asm-avr32/linkage.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .balign 2
-#define __ALIGN_STR ".balign 2"
-
-#endif /* __ASM_LINKAGE_H */
diff --git a/include/asm-avr32/local.h b/include/asm-avr32/local.h
deleted file mode 100644
index 1c1619694da3..000000000000
--- a/include/asm-avr32/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_LOCAL_H
-#define __ASM_AVR32_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_AVR32_LOCAL_H */
diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h
deleted file mode 100644
index 55b317a89061..000000000000
--- a/include/asm-avr32/mach/serial_at91.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/include/asm-arm/mach/serial_at91.h
- *
- *  Based on serial_sa1100.h  by Nicolas Pitre
- *
- *  Copyright (C) 2002 ATMEL Rousset
- *
- *  Low level machine dependent UART functions.
- */
-
-struct uart_port;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct atmel_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*enable_ms)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-	int	(*open)(struct uart_port *);
-	void	(*close)(struct uart_port *);
-};
-
-#if defined(CONFIG_SERIAL_ATMEL)
-void atmel_register_uart_fns(struct atmel_port_fns *fns);
-#else
-#define atmel_register_uart_fns(fns) do { } while (0)
-#endif
-
-
diff --git a/include/asm-avr32/mman.h b/include/asm-avr32/mman.h
deleted file mode 100644
index 648f91e7187a..000000000000
--- a/include/asm-avr32/mman.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_AVR32_MMAN_H__
-#define __ASM_AVR32_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ASM_AVR32_MMAN_H__ */
diff --git a/include/asm-avr32/mmu.h b/include/asm-avr32/mmu.h
deleted file mode 100644
index 60c2d2650d32..000000000000
--- a/include/asm-avr32/mmu.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_AVR32_MMU_H
-#define __ASM_AVR32_MMU_H
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_t;
-
-#define MMU_ITLB_ENTRIES	64
-#define MMU_DTLB_ENTRIES	64
-
-#endif /* __ASM_AVR32_MMU_H */
diff --git a/include/asm-avr32/mmu_context.h b/include/asm-avr32/mmu_context.h
deleted file mode 100644
index 27ff23407100..000000000000
--- a/include/asm-avr32/mmu_context.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * ASID handling taken from SH implementation.
- *   Copyright (C) 1999 Niibe Yutaka
- *   Copyright (C) 2003 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_MMU_CONTEXT_H
-#define __ASM_AVR32_MMU_CONTEXT_H
-
-#include <asm/tlbflush.h>
-#include <asm/sysreg.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * The MMU "context" consists of two things:
- *    (a) TLB cache version
- *    (b) ASID (Address Space IDentifier)
- */
-#define MMU_CONTEXT_ASID_MASK		0x000000ff
-#define MMU_CONTEXT_VERSION_MASK	0xffffff00
-#define MMU_CONTEXT_FIRST_VERSION       0x00000100
-#define NO_CONTEXT			0
-
-#define MMU_NO_ASID			0x100
-
-/* Virtual Page Number mask */
-#define MMU_VPN_MASK	0xfffff000
-
-/* Cache of MMU context last used */
-extern unsigned long mmu_context_cache;
-
-/*
- * Get MMU context if needed
- */
-static inline void
-get_mmu_context(struct mm_struct *mm)
-{
-	unsigned long mc = mmu_context_cache;
-
-	if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0)
-		/* It's up to date, do nothing */
-		return;
-
-	/* It's old, we need to get new context with new version */
-	mc = ++mmu_context_cache;
-	if (!(mc & MMU_CONTEXT_ASID_MASK)) {
-		/*
-		 * We have exhausted all ASIDs of this version.
-		 * Flush the TLB and start new cycle.
-		 */
-		flush_tlb_all();
-		/*
-		 * Fix version. Note that we avoid version #0
-		 * to distinguish NO_CONTEXT.
-		 */
-		if (!mc)
-			mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
-	}
-	mm->context = mc;
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-static inline int init_new_context(struct task_struct *tsk,
-				       struct mm_struct *mm)
-{
-	mm->context = NO_CONTEXT;
-	return 0;
-}
-
-/*
- * Destroy context related info for an mm_struct that is about
- * to be put to rest.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	/* Do nothing */
-}
-
-static inline void set_asid(unsigned long asid)
-{
-	/* XXX: We're destroying TLBEHI[8:31] */
-	sysreg_write(TLBEHI, asid & MMU_CONTEXT_ASID_MASK);
-	cpu_sync_pipeline();
-}
-
-static inline unsigned long get_asid(void)
-{
-	unsigned long asid;
-
-	asid = sysreg_read(TLBEHI);
-	return asid & MMU_CONTEXT_ASID_MASK;
-}
-
-static inline void activate_context(struct mm_struct *mm)
-{
-	get_mmu_context(mm);
-	set_asid(mm->context & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void switch_mm(struct mm_struct *prev,
-				 struct mm_struct *next,
-				 struct task_struct *tsk)
-{
-	if (likely(prev != next)) {
-		unsigned long __pgdir = (unsigned long)next->pgd;
-
-		sysreg_write(PTBR, __pgdir);
-		activate_context(next);
-	}
-}
-
-#define deactivate_mm(tsk,mm) do { } while(0)
-
-#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
-
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-
-static inline void enable_mmu(void)
-{
-	sysreg_write(MMUCR, (SYSREG_BIT(MMUCR_S)
-			     | SYSREG_BIT(E)
-			     | SYSREG_BIT(MMUCR_I)));
-	nop(); nop(); nop(); nop(); nop(); nop(); nop(); nop();
-
-	if (mmu_context_cache == NO_CONTEXT)
-		mmu_context_cache = MMU_CONTEXT_FIRST_VERSION;
-
-	set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void disable_mmu(void)
-{
-	sysreg_write(MMUCR, SYSREG_BIT(MMUCR_S));
-}
-
-#endif /* __ASM_AVR32_MMU_CONTEXT_H */
diff --git a/include/asm-avr32/module.h b/include/asm-avr32/module.h
deleted file mode 100644
index 451444538a1b..000000000000
--- a/include/asm-avr32/module.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASM_AVR32_MODULE_H
-#define __ASM_AVR32_MODULE_H
-
-struct mod_arch_syminfo {
-	unsigned long got_offset;
-	int got_initialized;
-};
-
-struct mod_arch_specific {
-	/* Starting offset of got in the module core memory. */
-	unsigned long got_offset;
-	/* Size of the got. */
-	unsigned long got_size;
-	/* Number of symbols in syminfo. */
-	int nsyms;
-	/* Additional symbol information (got offsets). */
-	struct mod_arch_syminfo *syminfo;
-};
-
-#define Elf_Shdr		Elf32_Shdr
-#define Elf_Sym			Elf32_Sym
-#define Elf_Ehdr		Elf32_Ehdr
-
-#define MODULE_PROC_FAMILY "AVR32v1"
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
-#endif /* __ASM_AVR32_MODULE_H */
diff --git a/include/asm-avr32/msgbuf.h b/include/asm-avr32/msgbuf.h
deleted file mode 100644
index ac18bc4da7f7..000000000000
--- a/include/asm-avr32/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __ASM_AVR32_MSGBUF_H
-#define __ASM_AVR32_MSGBUF_H
-
-/*
- * The msqid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* __ASM_AVR32_MSGBUF_H */
diff --git a/include/asm-avr32/mutex.h b/include/asm-avr32/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-avr32/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-avr32/namei.h b/include/asm-avr32/namei.h
deleted file mode 100644
index f0a26de06cab..000000000000
--- a/include/asm-avr32/namei.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_AVR32_NAMEI_H
-#define __ASM_AVR32_NAMEI_H
-
-/* This dummy routine may be changed to something useful */
-#define __emul_prefix() NULL
-
-#endif /* __ASM_AVR32_NAMEI_H */
diff --git a/include/asm-avr32/numnodes.h b/include/asm-avr32/numnodes.h
deleted file mode 100644
index 0b864d7ce330..000000000000
--- a/include/asm-avr32/numnodes.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_AVR32_NUMNODES_H
-#define __ASM_AVR32_NUMNODES_H
-
-/* Max 4 nodes */
-#define NODES_SHIFT	2
-
-#endif /* __ASM_AVR32_NUMNODES_H */
diff --git a/include/asm-avr32/ocd.h b/include/asm-avr32/ocd.h
deleted file mode 100644
index 6bef09490235..000000000000
--- a/include/asm-avr32/ocd.h
+++ /dev/null
@@ -1,543 +0,0 @@
-/*
- * AVR32 OCD Interface and register definitions
- *
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_OCD_H
-#define __ASM_AVR32_OCD_H
-
-/* OCD Register offsets. Abbreviations used below:
- *
- *      BP      Breakpoint
- *      Comm    Communication
- *      DT      Data Trace
- *      PC      Program Counter
- *      PID     Process ID
- *      R/W     Read/Write
- *      WP      Watchpoint
- */
-#define OCD_DID				0x0000  /* Device ID */
-#define OCD_DC				0x0008  /* Development Control */
-#define OCD_DS				0x0010  /* Development Status */
-#define OCD_RWCS			0x001c  /* R/W Access Control */
-#define OCD_RWA				0x0024  /* R/W Access Address */
-#define OCD_RWD				0x0028  /* R/W Access Data */
-#define OCD_WT				0x002c  /* Watchpoint Trigger */
-#define OCD_DTC				0x0034  /* Data Trace Control */
-#define OCD_DTSA0			0x0038  /* DT Start Addr Channel 0 */
-#define OCD_DTSA1			0x003c  /* DT Start Addr Channel 1 */
-#define OCD_DTEA0			0x0048  /* DT End Addr Channel 0 */
-#define OCD_DTEA1			0x004c  /* DT End Addr Channel 1 */
-#define OCD_BWC0A			0x0058  /* PC BP/WP Control 0A */
-#define OCD_BWC0B			0x005c  /* PC BP/WP Control 0B */
-#define OCD_BWC1A			0x0060  /* PC BP/WP Control 1A */
-#define OCD_BWC1B			0x0064  /* PC BP/WP Control 1B */
-#define OCD_BWC2A			0x0068  /* PC BP/WP Control 2A */
-#define OCD_BWC2B			0x006c  /* PC BP/WP Control 2B */
-#define OCD_BWC3A			0x0070  /* Data BP/WP Control 3A */
-#define OCD_BWC3B			0x0074  /* Data BP/WP Control 3B */
-#define OCD_BWA0A			0x0078  /* PC BP/WP Address 0A */
-#define OCD_BWA0B			0x007c  /* PC BP/WP Address 0B */
-#define OCD_BWA1A			0x0080  /* PC BP/WP Address 1A */
-#define OCD_BWA1B			0x0084  /* PC BP/WP Address 1B */
-#define OCD_BWA2A			0x0088  /* PC BP/WP Address 2A */
-#define OCD_BWA2B			0x008c  /* PC BP/WP Address 2B */
-#define OCD_BWA3A			0x0090  /* Data BP/WP Address 3A */
-#define OCD_BWA3B			0x0094  /* Data BP/WP Address 3B */
-#define OCD_NXCFG			0x0100  /* Nexus Configuration */
-#define OCD_DINST			0x0104  /* Debug Instruction */
-#define OCD_DPC				0x0108  /* Debug Program Counter */
-#define OCD_CPUCM			0x010c  /* CPU Control Mask */
-#define OCD_DCCPU			0x0110  /* Debug Comm CPU */
-#define OCD_DCEMU			0x0114  /* Debug Comm Emulator */
-#define OCD_DCSR			0x0118  /* Debug Comm Status */
-#define OCD_PID				0x011c  /* Ownership Trace PID */
-#define OCD_EPC0			0x0120  /* Event Pair Control 0 */
-#define OCD_EPC1			0x0124  /* Event Pair Control 1 */
-#define OCD_EPC2			0x0128  /* Event Pair Control 2 */
-#define OCD_EPC3			0x012c  /* Event Pair Control 3 */
-#define OCD_AXC				0x0130  /* AUX port Control */
-
-/* Bits in DID */
-#define OCD_DID_MID_START		1
-#define OCD_DID_MID_SIZE		11
-#define OCD_DID_PN_START		12
-#define OCD_DID_PN_SIZE			16
-#define OCD_DID_RN_START		28
-#define OCD_DID_RN_SIZE			4
-
-/* Bits in DC */
-#define OCD_DC_TM_START			0
-#define OCD_DC_TM_SIZE			2
-#define OCD_DC_EIC_START		3
-#define OCD_DC_EIC_SIZE			2
-#define OCD_DC_OVC_START		5
-#define OCD_DC_OVC_SIZE			3
-#define OCD_DC_SS_BIT			8
-#define OCD_DC_DBR_BIT			12
-#define OCD_DC_DBE_BIT			13
-#define OCD_DC_EOS_START		20
-#define OCD_DC_EOS_SIZE			2
-#define OCD_DC_SQA_BIT			22
-#define OCD_DC_IRP_BIT			23
-#define OCD_DC_IFM_BIT			24
-#define OCD_DC_TOZ_BIT			25
-#define OCD_DC_TSR_BIT			26
-#define OCD_DC_RID_BIT			27
-#define OCD_DC_ORP_BIT			28
-#define OCD_DC_MM_BIT			29
-#define OCD_DC_RES_BIT			30
-#define OCD_DC_ABORT_BIT		31
-
-/* Bits in DS */
-#define OCD_DS_SSS_BIT			0
-#define OCD_DS_SWB_BIT			1
-#define OCD_DS_HWB_BIT			2
-#define OCD_DS_HWE_BIT			3
-#define OCD_DS_STP_BIT			4
-#define OCD_DS_DBS_BIT			5
-#define OCD_DS_BP_START			8
-#define OCD_DS_BP_SIZE			8
-#define OCD_DS_INC_BIT			24
-#define OCD_DS_BOZ_BIT			25
-#define OCD_DS_DBA_BIT			26
-#define OCD_DS_EXB_BIT			27
-#define OCD_DS_NTBF_BIT			28
-
-/* Bits in RWCS */
-#define OCD_RWCS_DV_BIT			0
-#define OCD_RWCS_ERR_BIT		1
-#define OCD_RWCS_CNT_START		2
-#define OCD_RWCS_CNT_SIZE		14
-#define OCD_RWCS_CRC_BIT		19
-#define OCD_RWCS_NTBC_START		20
-#define OCD_RWCS_NTBC_SIZE		2
-#define OCD_RWCS_NTE_BIT		22
-#define OCD_RWCS_NTAP_BIT		23
-#define OCD_RWCS_WRAPPED_BIT		24
-#define OCD_RWCS_CCTRL_START		25
-#define OCD_RWCS_CCTRL_SIZE		2
-#define OCD_RWCS_SZ_START		27
-#define OCD_RWCS_SZ_SIZE		3
-#define OCD_RWCS_RW_BIT			30
-#define OCD_RWCS_AC_BIT			31
-
-/* Bits in RWA */
-#define OCD_RWA_RWA_START		0
-#define OCD_RWA_RWA_SIZE		32
-
-/* Bits in RWD */
-#define OCD_RWD_RWD_START		0
-#define OCD_RWD_RWD_SIZE		32
-
-/* Bits in WT */
-#define OCD_WT_DTE_START		20
-#define OCD_WT_DTE_SIZE			3
-#define OCD_WT_DTS_START		23
-#define OCD_WT_DTS_SIZE			3
-#define OCD_WT_PTE_START		26
-#define OCD_WT_PTE_SIZE			3
-#define OCD_WT_PTS_START		29
-#define OCD_WT_PTS_SIZE			3
-
-/* Bits in DTC */
-#define OCD_DTC_T0WP_BIT		0
-#define OCD_DTC_T1WP_BIT		1
-#define OCD_DTC_ASID0EN_BIT		2
-#define OCD_DTC_ASID0_START		3
-#define OCD_DTC_ASID0_SIZE		8
-#define OCD_DTC_ASID1EN_BIT		11
-#define OCD_DTC_ASID1_START		12
-#define OCD_DTC_ASID1_SIZE		8
-#define OCD_DTC_RWT1_START		28
-#define OCD_DTC_RWT1_SIZE		2
-#define OCD_DTC_RWT0_START		30
-#define OCD_DTC_RWT0_SIZE		2
-
-/* Bits in DTSA0 */
-#define OCD_DTSA0_DTSA_START		0
-#define OCD_DTSA0_DTSA_SIZE		32
-
-/* Bits in DTSA1 */
-#define OCD_DTSA1_DTSA_START		0
-#define OCD_DTSA1_DTSA_SIZE		32
-
-/* Bits in DTEA0 */
-#define OCD_DTEA0_DTEA_START		0
-#define OCD_DTEA0_DTEA_SIZE		32
-
-/* Bits in DTEA1 */
-#define OCD_DTEA1_DTEA_START		0
-#define OCD_DTEA1_DTEA_SIZE		32
-
-/* Bits in BWC0A */
-#define OCD_BWC0A_ASIDEN_BIT		0
-#define OCD_BWC0A_ASID_START		1
-#define OCD_BWC0A_ASID_SIZE		8
-#define OCD_BWC0A_EOC_BIT		14
-#define OCD_BWC0A_AME_BIT		25
-#define OCD_BWC0A_BWE_START		30
-#define OCD_BWC0A_BWE_SIZE		2
-
-/* Bits in BWC0B */
-#define OCD_BWC0B_ASIDEN_BIT		0
-#define OCD_BWC0B_ASID_START		1
-#define OCD_BWC0B_ASID_SIZE		8
-#define OCD_BWC0B_EOC_BIT		14
-#define OCD_BWC0B_AME_BIT		25
-#define OCD_BWC0B_BWE_START		30
-#define OCD_BWC0B_BWE_SIZE		2
-
-/* Bits in BWC1A */
-#define OCD_BWC1A_ASIDEN_BIT		0
-#define OCD_BWC1A_ASID_START		1
-#define OCD_BWC1A_ASID_SIZE		8
-#define OCD_BWC1A_EOC_BIT		14
-#define OCD_BWC1A_AME_BIT		25
-#define OCD_BWC1A_BWE_START		30
-#define OCD_BWC1A_BWE_SIZE		2
-
-/* Bits in BWC1B */
-#define OCD_BWC1B_ASIDEN_BIT		0
-#define OCD_BWC1B_ASID_START		1
-#define OCD_BWC1B_ASID_SIZE		8
-#define OCD_BWC1B_EOC_BIT		14
-#define OCD_BWC1B_AME_BIT		25
-#define OCD_BWC1B_BWE_START		30
-#define OCD_BWC1B_BWE_SIZE		2
-
-/* Bits in BWC2A */
-#define OCD_BWC2A_ASIDEN_BIT		0
-#define OCD_BWC2A_ASID_START		1
-#define OCD_BWC2A_ASID_SIZE		8
-#define OCD_BWC2A_EOC_BIT		14
-#define OCD_BWC2A_AMB_START		20
-#define OCD_BWC2A_AMB_SIZE		5
-#define OCD_BWC2A_AME_BIT		25
-#define OCD_BWC2A_BWE_START		30
-#define OCD_BWC2A_BWE_SIZE		2
-
-/* Bits in BWC2B */
-#define OCD_BWC2B_ASIDEN_BIT		0
-#define OCD_BWC2B_ASID_START		1
-#define OCD_BWC2B_ASID_SIZE		8
-#define OCD_BWC2B_EOC_BIT		14
-#define OCD_BWC2B_AME_BIT		25
-#define OCD_BWC2B_BWE_START		30
-#define OCD_BWC2B_BWE_SIZE		2
-
-/* Bits in BWC3A */
-#define OCD_BWC3A_ASIDEN_BIT		0
-#define OCD_BWC3A_ASID_START		1
-#define OCD_BWC3A_ASID_SIZE		8
-#define OCD_BWC3A_SIZE_START		9
-#define OCD_BWC3A_SIZE_SIZE		3
-#define OCD_BWC3A_EOC_BIT		14
-#define OCD_BWC3A_BWO_START		16
-#define OCD_BWC3A_BWO_SIZE		2
-#define OCD_BWC3A_BME_START		20
-#define OCD_BWC3A_BME_SIZE		4
-#define OCD_BWC3A_BRW_START		28
-#define OCD_BWC3A_BRW_SIZE		2
-#define OCD_BWC3A_BWE_START		30
-#define OCD_BWC3A_BWE_SIZE		2
-
-/* Bits in BWC3B */
-#define OCD_BWC3B_ASIDEN_BIT		0
-#define OCD_BWC3B_ASID_START		1
-#define OCD_BWC3B_ASID_SIZE		8
-#define OCD_BWC3B_SIZE_START		9
-#define OCD_BWC3B_SIZE_SIZE		3
-#define OCD_BWC3B_EOC_BIT		14
-#define OCD_BWC3B_BWO_START		16
-#define OCD_BWC3B_BWO_SIZE		2
-#define OCD_BWC3B_BME_START		20
-#define OCD_BWC3B_BME_SIZE		4
-#define OCD_BWC3B_BRW_START		28
-#define OCD_BWC3B_BRW_SIZE		2
-#define OCD_BWC3B_BWE_START		30
-#define OCD_BWC3B_BWE_SIZE		2
-
-/* Bits in BWA0A */
-#define OCD_BWA0A_BWA_START		0
-#define OCD_BWA0A_BWA_SIZE		32
-
-/* Bits in BWA0B */
-#define OCD_BWA0B_BWA_START		0
-#define OCD_BWA0B_BWA_SIZE		32
-
-/* Bits in BWA1A */
-#define OCD_BWA1A_BWA_START		0
-#define OCD_BWA1A_BWA_SIZE		32
-
-/* Bits in BWA1B */
-#define OCD_BWA1B_BWA_START		0
-#define OCD_BWA1B_BWA_SIZE		32
-
-/* Bits in BWA2A */
-#define OCD_BWA2A_BWA_START		0
-#define OCD_BWA2A_BWA_SIZE		32
-
-/* Bits in BWA2B */
-#define OCD_BWA2B_BWA_START		0
-#define OCD_BWA2B_BWA_SIZE		32
-
-/* Bits in BWA3A */
-#define OCD_BWA3A_BWA_START		0
-#define OCD_BWA3A_BWA_SIZE		32
-
-/* Bits in BWA3B */
-#define OCD_BWA3B_BWA_START		0
-#define OCD_BWA3B_BWA_SIZE		32
-
-/* Bits in NXCFG */
-#define OCD_NXCFG_NXARCH_START		0
-#define OCD_NXCFG_NXARCH_SIZE		4
-#define OCD_NXCFG_NXOCD_START		4
-#define OCD_NXCFG_NXOCD_SIZE		4
-#define OCD_NXCFG_NXPCB_START		8
-#define OCD_NXCFG_NXPCB_SIZE		4
-#define OCD_NXCFG_NXDB_START		12
-#define OCD_NXCFG_NXDB_SIZE		4
-#define OCD_NXCFG_MXMSEO_BIT		16
-#define OCD_NXCFG_NXMDO_START		17
-#define OCD_NXCFG_NXMDO_SIZE		4
-#define OCD_NXCFG_NXPT_BIT		21
-#define OCD_NXCFG_NXOT_BIT		22
-#define OCD_NXCFG_NXDWT_BIT		23
-#define OCD_NXCFG_NXDRT_BIT		24
-#define OCD_NXCFG_NXDTC_START		25
-#define OCD_NXCFG_NXDTC_SIZE		3
-#define OCD_NXCFG_NXDMA_BIT		28
-
-/* Bits in DINST */
-#define OCD_DINST_DINST_START		0
-#define OCD_DINST_DINST_SIZE		32
-
-/* Bits in CPUCM */
-#define OCD_CPUCM_BEM_BIT		1
-#define OCD_CPUCM_FEM_BIT		2
-#define OCD_CPUCM_REM_BIT		3
-#define OCD_CPUCM_IBEM_BIT		4
-#define OCD_CPUCM_IEEM_BIT		5
-
-/* Bits in DCCPU */
-#define OCD_DCCPU_DATA_START		0
-#define OCD_DCCPU_DATA_SIZE		32
-
-/* Bits in DCEMU */
-#define OCD_DCEMU_DATA_START		0
-#define OCD_DCEMU_DATA_SIZE		32
-
-/* Bits in DCSR */
-#define OCD_DCSR_CPUD_BIT		0
-#define OCD_DCSR_EMUD_BIT		1
-
-/* Bits in PID */
-#define OCD_PID_PROCESS_START		0
-#define OCD_PID_PROCESS_SIZE		32
-
-/* Bits in EPC0 */
-#define OCD_EPC0_RNG_START		0
-#define OCD_EPC0_RNG_SIZE		2
-#define OCD_EPC0_CE_BIT			4
-#define OCD_EPC0_ECNT_START		16
-#define OCD_EPC0_ECNT_SIZE		16
-
-/* Bits in EPC1 */
-#define OCD_EPC1_RNG_START		0
-#define OCD_EPC1_RNG_SIZE		2
-#define OCD_EPC1_ATB_BIT		5
-#define OCD_EPC1_AM_BIT			6
-
-/* Bits in EPC2 */
-#define OCD_EPC2_RNG_START		0
-#define OCD_EPC2_RNG_SIZE		2
-#define OCD_EPC2_DB_START		2
-#define OCD_EPC2_DB_SIZE		2
-
-/* Bits in EPC3 */
-#define OCD_EPC3_RNG_START		0
-#define OCD_EPC3_RNG_SIZE		2
-#define OCD_EPC3_DWE_BIT		2
-
-/* Bits in AXC */
-#define OCD_AXC_DIV_START		0
-#define OCD_AXC_DIV_SIZE		4
-#define OCD_AXC_AXE_BIT			8
-#define OCD_AXC_AXS_BIT			9
-#define OCD_AXC_DDR_BIT			10
-#define OCD_AXC_LS_BIT			11
-#define OCD_AXC_REX_BIT			12
-#define OCD_AXC_REXTEN_BIT		13
-
-/* Constants for DC:EIC */
-#define OCD_EIC_PROGRAM_AND_DATA_TRACE	0
-#define OCD_EIC_BREAKPOINT		1
-#define OCD_EIC_NOP			2
-
-/* Constants for DC:OVC */
-#define OCD_OVC_OVERRUN			0
-#define OCD_OVC_DELAY_CPU_BTM		1
-#define OCD_OVC_DELAY_CPU_DTM		2
-#define OCD_OVC_DELAY_CPU_BTM_DTM	3
-
-/* Constants for DC:EOS */
-#define OCD_EOS_NOP			0
-#define OCD_EOS_DEBUG_MODE		1
-#define OCD_EOS_BREAKPOINT_WATCHPOINT	2
-#define OCD_EOS_THQ			3
-
-/* Constants for RWCS:NTBC */
-#define OCD_NTBC_OVERWRITE		0
-#define OCD_NTBC_DISABLE		1
-#define OCD_NTBC_BREAKPOINT		2
-
-/* Constants for RWCS:CCTRL */
-#define OCD_CCTRL_AUTO			0
-#define OCD_CCTRL_CACHED		1
-#define OCD_CCTRL_UNCACHED		2
-
-/* Constants for RWCS:SZ */
-#define OCD_SZ_BYTE			0
-#define OCD_SZ_HALFWORD			1
-#define OCD_SZ_WORD			2
-
-/* Constants for WT:PTS */
-#define OCD_PTS_DISABLED		0
-#define OCD_PTS_PROGRAM_0B		1
-#define OCD_PTS_PROGRAM_1A		2
-#define OCD_PTS_PROGRAM_1B		3
-#define OCD_PTS_PROGRAM_2A		4
-#define OCD_PTS_PROGRAM_2B		5
-#define OCD_PTS_DATA_3A			6
-#define OCD_PTS_DATA_3B			7
-
-/* Constants for DTC:RWT1 */
-#define OCD_RWT1_NO_TRACE		0
-#define OCD_RWT1_DATA_READ		1
-#define OCD_RWT1_DATA_WRITE		2
-#define OCD_RWT1_DATA_READ_WRITE	3
-
-/* Constants for DTC:RWT0 */
-#define OCD_RWT0_NO_TRACE		0
-#define OCD_RWT0_DATA_READ		1
-#define OCD_RWT0_DATA_WRITE		2
-#define OCD_RWT0_DATA_READ_WRITE	3
-
-/* Constants for BWC0A:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for BWC0B:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for BWC1A:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for BWC1B:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for BWC2A:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for BWC2B:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for BWC3A:SIZE */
-#define OCD_SIZE_BYTE_ACCESS		4
-#define OCD_SIZE_HALFWORD_ACCESS	5
-#define OCD_SIZE_WORD_ACCESS		6
-#define OCD_SIZE_DOUBLE_WORD_ACCESS	7
-
-/* Constants for BWC3A:BRW */
-#define OCD_BRW_READ_BREAK		0
-#define OCD_BRW_WRITE_BREAK		1
-#define OCD_BRW_ANY_ACCES_BREAK		2
-
-/* Constants for BWC3A:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for BWC3B:SIZE */
-#define OCD_SIZE_BYTE_ACCESS		4
-#define OCD_SIZE_HALFWORD_ACCESS	5
-#define OCD_SIZE_WORD_ACCESS		6
-#define OCD_SIZE_DOUBLE_WORD_ACCESS	7
-
-/* Constants for BWC3B:BRW */
-#define OCD_BRW_READ_BREAK		0
-#define OCD_BRW_WRITE_BREAK		1
-#define OCD_BRW_ANY_ACCES_BREAK		2
-
-/* Constants for BWC3B:BWE */
-#define OCD_BWE_DISABLED		0
-#define OCD_BWE_BREAKPOINT_ENABLED	1
-#define OCD_BWE_WATCHPOINT_ENABLED	3
-
-/* Constants for EPC0:RNG */
-#define OCD_RNG_DISABLED		0
-#define OCD_RNG_EXCLUSIVE		1
-#define OCD_RNG_INCLUSIVE		2
-
-/* Constants for EPC1:RNG */
-#define OCD_RNG_DISABLED		0
-#define OCD_RNG_EXCLUSIVE		1
-#define OCD_RNG_INCLUSIVE		2
-
-/* Constants for EPC2:RNG */
-#define OCD_RNG_DISABLED		0
-#define OCD_RNG_EXCLUSIVE		1
-#define OCD_RNG_INCLUSIVE		2
-
-/* Constants for EPC2:DB */
-#define OCD_DB_DISABLED			0
-#define OCD_DB_CHAINED_B		1
-#define OCD_DB_CHAINED_A		2
-#define OCD_DB_AHAINED_A_AND_B		3
-
-/* Constants for EPC3:RNG */
-#define OCD_RNG_DISABLED		0
-#define OCD_RNG_EXCLUSIVE		1
-#define OCD_RNG_INCLUSIVE		2
-
-#ifndef __ASSEMBLER__
-
-/* Register access macros */
-static inline unsigned long __ocd_read(unsigned int reg)
-{
-	return __builtin_mfdr(reg);
-}
-
-static inline void __ocd_write(unsigned int reg, unsigned long value)
-{
-	__builtin_mtdr(reg, value);
-}
-
-#define ocd_read(reg)			__ocd_read(OCD_##reg)
-#define ocd_write(reg, value)		__ocd_write(OCD_##reg, value)
-
-struct task_struct;
-
-void ocd_enable(struct task_struct *child);
-void ocd_disable(struct task_struct *child);
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __ASM_AVR32_OCD_H */
diff --git a/include/asm-avr32/page.h b/include/asm-avr32/page.h
deleted file mode 100644
index cbbc5ca9728b..000000000000
--- a/include/asm-avr32/page.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_PAGE_H
-#define __ASM_AVR32_PAGE_H
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	12
-#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-#define PTE_MASK	PAGE_MASK
-
-#ifndef __ASSEMBLY__
-
-#include <asm/addrspace.h>
-
-extern void clear_page(void *to);
-extern void copy_page(void *to, void *from);
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)		((x).pte)
-#define pgd_val(x)		((x).pgd)
-#define pgprot_val(x)		((x).pgprot)
-
-#define __pte(x)		((pte_t) { (x) })
-#define __pgd(x)		((pgd_t) { (x) })
-#define __pgprot(x)		((pgprot_t) { (x) })
-
-/* FIXME: These should be removed soon */
-extern unsigned long memory_start, memory_end;
-
-/* Pure 2^n version of get_order */
-static inline int get_order(unsigned long size)
-{
-	unsigned lz;
-
-	size = (size - 1) >> PAGE_SHIFT;
-	asm("clz %0, %1" : "=r"(lz) : "r"(size));
-	return 32 - lz;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-/* Align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
-/*
- * The hardware maps the virtual addresses 0x80000000 -> 0x9fffffff
- * permanently to the physical addresses 0x00000000 -> 0x1fffffff when
- * segmentation is enabled. We want to make use of this in order to
- * minimize TLB pressure.
- */
-#define PAGE_OFFSET		(0x80000000UL)
-
-/*
- * ALSA uses virt_to_page() on DMA pages, which I'm not entirely sure
- * is a good idea. Anyway, we can't simply subtract PAGE_OFFSET here
- * in that case, so we'll have to mask out the three most significant
- * bits of the address instead...
- *
- * What's the difference between __pa() and virt_to_phys() anyway?
- */
-#define __pa(x)		PHYSADDR(x)
-#define __va(x)		((void *)(P1SEGADDR(x)))
-
-#define MAP_NR(addr)	(((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
-
-#define phys_to_page(phys)	(pfn_to_page(phys >> PAGE_SHIFT))
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-
-#define PHYS_PFN_OFFSET		(CONFIG_PHYS_OFFSET >> PAGE_SHIFT)
-
-#define pfn_to_page(pfn)	(mem_map + ((pfn) - PHYS_PFN_OFFSET))
-#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + PHYS_PFN_OFFSET)
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif /* CONFIG_NEED_MULTIPLE_NODES */
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE |	\
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-/*
- * Memory above this physical address will be considered highmem.
- */
-#define HIGHMEM_START		0x20000000UL
-
-#endif /* __ASM_AVR32_PAGE_H */
diff --git a/include/asm-avr32/param.h b/include/asm-avr32/param.h
deleted file mode 100644
index 34bc8d4c3b29..000000000000
--- a/include/asm-avr32/param.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_AVR32_PARAM_H
-#define __ASM_AVR32_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif
-
-#ifndef HZ
-# define HZ		100
-#endif
-
-/* TODO: Should be configurable */
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-# define NOGROUP	(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64
-
-#endif /* __ASM_AVR32_PARAM_H */
diff --git a/include/asm-avr32/pci.h b/include/asm-avr32/pci.h
deleted file mode 100644
index a32a02372017..000000000000
--- a/include/asm-avr32/pci.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_AVR32_PCI_H__
-#define __ASM_AVR32_PCI_H__
-
-/* We don't support PCI yet, but some drivers require this file anyway */
-
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
-#include <asm-generic/pci-dma-compat.h>
-
-#endif /* __ASM_AVR32_PCI_H__ */
diff --git a/include/asm-avr32/percpu.h b/include/asm-avr32/percpu.h
deleted file mode 100644
index 69227b4cd0d4..000000000000
--- a/include/asm-avr32/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_PERCPU_H
-#define __ASM_AVR32_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_AVR32_PERCPU_H */
diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h
deleted file mode 100644
index 640821323943..000000000000
--- a/include/asm-avr32/pgalloc.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_PGALLOC_H
-#define __ASM_AVR32_PGALLOC_H
-
-#include <linux/quicklist.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-#define QUICK_PGD	0	/* Preserve kernel mappings over free */
-#define QUICK_PT	1	/* Zero on free */
-
-static inline void pmd_populate_kernel(struct mm_struct *mm,
-				       pmd_t *pmd, pte_t *pte)
-{
-	set_pmd(pmd, __pmd((unsigned long)pte));
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
-				    pgtable_t pte)
-{
-	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void pgd_ctor(void *x)
-{
-	pgd_t *pgd = x;
-
-	memcpy(pgd + USER_PTRS_PER_PGD,
-		swapper_pg_dir + USER_PTRS_PER_PGD,
-		(PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-}
-
-/*
- * Allocate and free page tables
- */
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	quicklist_free(QUICK_PGD, NULL, pgd);
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-					  unsigned long address)
-{
-	return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
-					 unsigned long address)
-{
-	struct page *page;
-	void *pg;
-
-	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
-	if (!pg)
-		return NULL;
-
-	page = virt_to_page(pg);
-	pgtable_page_ctor(page);
-
-	return page;
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	quicklist_free(QUICK_PT, NULL, pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	quicklist_free_page(QUICK_PT, NULL, pte);
-}
-
-#define __pte_free_tlb(tlb,pte)				\
-do {							\
-	pgtable_page_dtor(pte);				\
-	tlb_remove_page((tlb), pte);			\
-} while (0)
-
-static inline void check_pgt_cache(void)
-{
-	quicklist_trim(QUICK_PGD, NULL, 25, 16);
-	quicklist_trim(QUICK_PT, NULL, 25, 16);
-}
-
-#endif /* __ASM_AVR32_PGALLOC_H */
diff --git a/include/asm-avr32/pgtable-2level.h b/include/asm-avr32/pgtable-2level.h
deleted file mode 100644
index 425dd567b5b9..000000000000
--- a/include/asm-avr32/pgtable-2level.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_PGTABLE_2LEVEL_H
-#define __ASM_AVR32_PGTABLE_2LEVEL_H
-
-#include <asm-generic/pgtable-nopmd.h>
-
-/*
- * Traditional 2-level paging structure
- */
-#define PGDIR_SHIFT	22
-#define PTRS_PER_PGD	1024
-
-#define PTRS_PER_PTE	1024
-
-#ifndef __ASSEMBLY__
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep, pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_AVR32_PGTABLE_2LEVEL_H */
diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h
deleted file mode 100644
index fecdda16f444..000000000000
--- a/include/asm-avr32/pgtable.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_PGTABLE_H
-#define __ASM_AVR32_PGTABLE_H
-
-#include <asm/addrspace.h>
-
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Use two-level page tables just as the i386 (without PAE)
- */
-#include <asm/pgtable-2level.h>
-
-/*
- * The following code might need some cleanup when the values are
- * final...
- */
-#define PMD_SIZE	(1UL << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS	0
-
-#ifndef __ASSEMBLY__
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void paging_init(void);
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used for
- * zero-mapped memory areas etc.
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr) (empty_zero_page)
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8 MiB value just means that there will be a 8 MiB "hole"
- * after the uncached physical memory (P2 segment) until the vmalloc
- * area starts. That means that any out-of-bounds memory accesses will
- * hopefully be caught; we don't know if the end of the P1/P2 segments
- * are actually used for anything, but it is anyway safer to let the
- * MMU catch these kinds of errors than to rely on the memory bus.
- *
- * A "hole" of the same size is added to the end of the P3 segment as
- * well. It might seem wasteful to use 16 MiB of virtual address space
- * on this, but we do have 512 MiB of it...
- *
- * The vmalloc() routines leave a hole of 4 KiB between each vmalloced
- * area for the same reason.
- */
-#define VMALLOC_OFFSET	(8 * 1024 * 1024)
-#define VMALLOC_START	(P3SEG + VMALLOC_OFFSET)
-#define VMALLOC_END	(P4SEG - VMALLOC_OFFSET)
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Page flags. Some of these flags are not directly supported by
- * hardware, so we have to emulate them.
- */
-#define _TLBEHI_BIT_VALID	9
-#define _TLBEHI_VALID		(1 << _TLBEHI_BIT_VALID)
-
-#define _PAGE_BIT_WT		0  /* W-bit   : write-through */
-#define _PAGE_BIT_DIRTY		1  /* D-bit   : page changed */
-#define _PAGE_BIT_SZ0		2  /* SZ0-bit : Size of page */
-#define _PAGE_BIT_SZ1		3  /* SZ1-bit : Size of page */
-#define _PAGE_BIT_EXECUTE	4  /* X-bit   : execute access allowed */
-#define _PAGE_BIT_RW		5  /* AP0-bit : write access allowed */
-#define _PAGE_BIT_USER		6  /* AP1-bit : user space access allowed */
-#define _PAGE_BIT_BUFFER	7  /* B-bit   : bufferable */
-#define _PAGE_BIT_GLOBAL	8  /* G-bit   : global (ignore ASID) */
-#define _PAGE_BIT_CACHABLE	9  /* C-bit   : cachable */
-
-/* If we drop support for 1K pages, we get two extra bits */
-#define _PAGE_BIT_PRESENT	10
-#define _PAGE_BIT_ACCESSED	11 /* software: page was accessed */
-
-/* The following flags are only valid when !PRESENT */
-#define _PAGE_BIT_FILE		0 /* software: pagecache or swap? */
-
-#define _PAGE_WT		(1 << _PAGE_BIT_WT)
-#define _PAGE_DIRTY		(1 << _PAGE_BIT_DIRTY)
-#define _PAGE_EXECUTE		(1 << _PAGE_BIT_EXECUTE)
-#define _PAGE_RW		(1 << _PAGE_BIT_RW)
-#define _PAGE_USER		(1 << _PAGE_BIT_USER)
-#define _PAGE_BUFFER		(1 << _PAGE_BIT_BUFFER)
-#define _PAGE_GLOBAL		(1 << _PAGE_BIT_GLOBAL)
-#define _PAGE_CACHABLE		(1 << _PAGE_BIT_CACHABLE)
-
-/* Software flags */
-#define _PAGE_ACCESSED		(1 << _PAGE_BIT_ACCESSED)
-#define _PAGE_PRESENT		(1 << _PAGE_BIT_PRESENT)
-#define _PAGE_FILE		(1 << _PAGE_BIT_FILE)
-
-/*
- * Page types, i.e. sizes. _PAGE_TYPE_NONE corresponds to what is
- * usually called _PAGE_PROTNONE on other architectures.
- *
- * XXX: Find out if _PAGE_PROTNONE is equivalent with !_PAGE_USER. If
- * so, we can encode all possible page sizes (although we can't really
- * support 1K pages anyway due to the _PAGE_PRESENT and _PAGE_ACCESSED
- * bits)
- *
- */
-#define _PAGE_TYPE_MASK		((1 << _PAGE_BIT_SZ0) | (1 << _PAGE_BIT_SZ1))
-#define _PAGE_TYPE_NONE		(0 << _PAGE_BIT_SZ0)
-#define _PAGE_TYPE_SMALL	(1 << _PAGE_BIT_SZ0)
-#define _PAGE_TYPE_MEDIUM	(2 << _PAGE_BIT_SZ0)
-#define _PAGE_TYPE_LARGE	(3 << _PAGE_BIT_SZ0)
-
-/*
- * Mask which drop software flags. We currently can't handle more than
- * 512 MiB of physical memory, so we can use bits 29-31 for other
- * stuff.  With a fixed 4K page size, we can use bits 10-11 as well as
- * bits 2-3 (SZ)
- */
-#define _PAGE_FLAGS_HARDWARE_MASK	0xfffff3ff
-
-#define _PAGE_FLAGS_CACHE_MASK	(_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
-
-/* Flags that may be modified by software */
-#define _PAGE_CHG_MASK		(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
-				 | _PAGE_FLAGS_CACHE_MASK)
-
-#define _PAGE_FLAGS_READ	(_PAGE_CACHABLE	| _PAGE_BUFFER)
-#define _PAGE_FLAGS_WRITE	(_PAGE_FLAGS_READ | _PAGE_RW | _PAGE_DIRTY)
-
-#define _PAGE_NORMAL(x)	__pgprot((x) | _PAGE_PRESENT | _PAGE_TYPE_SMALL	\
-				 | _PAGE_ACCESSED)
-
-#define PAGE_NONE	(_PAGE_ACCESSED | _PAGE_TYPE_NONE)
-#define PAGE_READ	(_PAGE_FLAGS_READ | _PAGE_USER)
-#define PAGE_EXEC	(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_USER)
-#define PAGE_WRITE	(_PAGE_FLAGS_WRITE | _PAGE_USER)
-#define PAGE_KERNEL	_PAGE_NORMAL(_PAGE_FLAGS_WRITE | _PAGE_EXECUTE | _PAGE_GLOBAL)
-#define PAGE_KERNEL_RO	_PAGE_NORMAL(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_GLOBAL)
-
-#define _PAGE_P(x)	_PAGE_NORMAL((x) & ~(_PAGE_RW | _PAGE_DIRTY))
-#define _PAGE_S(x)	_PAGE_NORMAL(x)
-
-#define PAGE_COPY	_PAGE_P(PAGE_WRITE | PAGE_READ)
-#define PAGE_SHARED	_PAGE_S(PAGE_WRITE | PAGE_READ)
-
-#ifndef __ASSEMBLY__
-/*
- * The hardware supports flags for write- and execute access. Read is
- * always allowed if the page is loaded into the TLB, so the "-w-",
- * "--x" and "-wx" mappings are implemented as "rw-", "r-x" and "rwx",
- * respectively.
- *
- * The "---" case is handled by software; the page will simply not be
- * loaded into the TLB if the page type is _PAGE_TYPE_NONE.
- */
-
-#define __P000	__pgprot(PAGE_NONE)
-#define __P001	_PAGE_P(PAGE_READ)
-#define __P010	_PAGE_P(PAGE_WRITE)
-#define __P011	_PAGE_P(PAGE_WRITE | PAGE_READ)
-#define __P100	_PAGE_P(PAGE_EXEC)
-#define __P101	_PAGE_P(PAGE_EXEC | PAGE_READ)
-#define __P110	_PAGE_P(PAGE_EXEC | PAGE_WRITE)
-#define __P111	_PAGE_P(PAGE_EXEC | PAGE_WRITE | PAGE_READ)
-
-#define __S000	__pgprot(PAGE_NONE)
-#define __S001	_PAGE_S(PAGE_READ)
-#define __S010	_PAGE_S(PAGE_WRITE)
-#define __S011	_PAGE_S(PAGE_WRITE | PAGE_READ)
-#define __S100	_PAGE_S(PAGE_EXEC)
-#define __S101	_PAGE_S(PAGE_EXEC | PAGE_READ)
-#define __S110	_PAGE_S(PAGE_EXEC | PAGE_WRITE)
-#define __S111	_PAGE_S(PAGE_EXEC | PAGE_WRITE | PAGE_READ)
-
-#define pte_none(x)	(!pte_val(x))
-#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
-
-#define pte_clear(mm,addr,xp)					\
-	do {							\
-		set_pte_at(mm, addr, xp, __pte(0));		\
-	} while (0)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte)
-{
-	return pte_val(pte) & _PAGE_RW;
-}
-static inline int pte_dirty(pte_t pte)
-{
-	return pte_val(pte) & _PAGE_DIRTY;
-}
-static inline int pte_young(pte_t pte)
-{
-	return pte_val(pte) & _PAGE_ACCESSED;
-}
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
-/*
- * The following only work if pte_present() is not true.
- */
-static inline int pte_file(pte_t pte)
-{
-	return pte_val(pte) & _PAGE_FILE;
-}
-
-/* Mutator functions for PTE bits */
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW));
-	return pte;
-}
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY));
-	return pte;
-}
-static inline pte_t pte_mkold(pte_t pte)
-{
-	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED));
-	return pte;
-}
-static inline pte_t pte_mkwrite(pte_t pte)
-{
-	set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW));
-	return pte;
-}
-static inline pte_t pte_mkdirty(pte_t pte)
-{
-	set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY));
-	return pte;
-}
-static inline pte_t pte_mkyoung(pte_t pte)
-{
-	set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED));
-	return pte;
-}
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return pte;
-}
-
-#define pmd_none(x)	(!pmd_val(x))
-#define pmd_present(x)	(pmd_val(x))
-
-static inline void pmd_clear(pmd_t *pmdp)
-{
-	set_pmd(pmdp, __pmd(0));
-}
-
-#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
-
-/*
- * Permanent address of a page. We don't support highmem, so this is
- * trivial.
- */
-#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
-#define pte_page(x)	(pfn_to_page(pte_pfn(x)))
-
-/*
- * Mark the prot value as uncacheable and unbufferable
- */
-#define pgprot_noncached(prot)						\
-	__pgprot(pgprot_val(prot) & ~(_PAGE_BUFFER | _PAGE_CACHABLE))
-
-/*
- * Mark the prot value as uncacheable but bufferable
- */
-#define pgprot_writecombine(prot)					\
-	__pgprot((pgprot_val(prot) & ~_PAGE_CACHABLE) | _PAGE_BUFFER)
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK)
-			    | pgprot_val(newprot)));
-	return pte;
-}
-
-#define page_pte(page)	page_pte_prot(page, __pgprot(0))
-
-#define pmd_page_vaddr(pmd)	pmd_val(pmd)
-#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address)	(((address) >> PGDIR_SHIFT)	\
-				 & (PTRS_PER_PGD - 1))
-#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address)				\
-	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset(dir, address)					\
-	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
-#define pte_offset_kernel(dir, address)					\
-	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
-#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
-#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address)
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
-
-struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct * vma,
-			     unsigned long address, pte_t pte);
-
-/*
- * Encode and decode a swap entry
- *
- * Constraints:
- *   _PAGE_FILE at bit 0
- *   _PAGE_TYPE_* at bits 2-3 (for emulating _PAGE_PROTNONE)
- *   _PAGE_PRESENT at bit 10
- *
- * We encode the type into bits 4-9 and offset into bits 11-31. This
- * gives us a 21 bits offset, or 2**21 * 4K = 8G usable swap space per
- * device, and 64 possible types.
- *
- * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
- *       and _PAGE_PROTNONE bits
- */
-#define __swp_type(x)		(((x).val >> 4) & 0x3f)
-#define __swp_offset(x)		((x).val >> 11)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-/*
- * Encode and decode a nonlinear file mapping entry. We have to
- * preserve _PAGE_FILE and _PAGE_PRESENT here. _PAGE_TYPE_* isn't
- * necessary, since _PAGE_FILE implies !_PAGE_PROTNONE (?)
- */
-#define PTE_FILE_MAX_BITS	30
-#define pte_to_pgoff(pte)	(((pte_val(pte) >> 1) & 0x1ff)		\
-				 | ((pte_val(pte) >> 11) << 9))
-#define pgoff_to_pte(off)	((pte_t) { ((((off) & 0x1ff) << 1)	\
-					    | (((off) >> 9) << 11)	\
-					    | _PAGE_FILE) })
-
-typedef pte_t *pte_addr_t;
-
-#define kern_addr_valid(addr)	(1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
-	remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/* No page table caches to initialize (?) */
-#define pgtable_cache_init()	do { } while(0)
-
-#include <asm-generic/pgtable.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_AVR32_PGTABLE_H */
diff --git a/include/asm-avr32/poll.h b/include/asm-avr32/poll.h
deleted file mode 100644
index c98509d3149e..000000000000
--- a/include/asm-avr32/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-avr32/posix_types.h b/include/asm-avr32/posix_types.h
deleted file mode 100644
index fe0c0c014389..000000000000
--- a/include/asm-avr32/posix_types.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_POSIX_TYPES_H
-#define __ASM_AVR32_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long   __kernel_ino_t;
-typedef unsigned short  __kernel_mode_t;
-typedef unsigned short  __kernel_nlink_t;
-typedef long            __kernel_off_t;
-typedef int             __kernel_pid_t;
-typedef unsigned short  __kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef int             __kernel_ptrdiff_t;
-typedef long            __kernel_time_t;
-typedef long            __kernel_suseconds_t;
-typedef long            __kernel_clock_t;
-typedef int             __kernel_timer_t;
-typedef int             __kernel_clockid_t;
-typedef int             __kernel_daddr_t;
-typedef char *          __kernel_caddr_t;
-typedef unsigned short  __kernel_uid16_t;
-typedef unsigned short  __kernel_gid16_t;
-typedef unsigned int    __kernel_uid32_t;
-typedef unsigned int    __kernel_gid32_t;
-
-typedef unsigned short  __kernel_old_uid_t;
-typedef unsigned short  __kernel_old_gid_t;
-typedef unsigned short  __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long       __kernel_loff_t;
-#endif
-
-typedef struct {
-    int     val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef  __FD_SET
-static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-    unsigned long __tmp = __fd / __NFDBITS;
-    unsigned long __rem = __fd % __NFDBITS;
-    __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef  __FD_CLR
-static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-    unsigned long __tmp = __fd / __NFDBITS;
-    unsigned long __rem = __fd % __NFDBITS;
-    __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef  __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{
-    unsigned long __tmp = __fd / __NFDBITS;
-    unsigned long __rem = __fd % __NFDBITS;
-    return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef  __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
-{
-    unsigned long *__tmp = __p->fds_bits;
-    int __i;
-
-    if (__builtin_constant_p(__FDSET_LONGS)) {
-        switch (__FDSET_LONGS) {
-            case 16:
-                __tmp[ 0] = 0; __tmp[ 1] = 0;
-                __tmp[ 2] = 0; __tmp[ 3] = 0;
-                __tmp[ 4] = 0; __tmp[ 5] = 0;
-                __tmp[ 6] = 0; __tmp[ 7] = 0;
-                __tmp[ 8] = 0; __tmp[ 9] = 0;
-                __tmp[10] = 0; __tmp[11] = 0;
-                __tmp[12] = 0; __tmp[13] = 0;
-                __tmp[14] = 0; __tmp[15] = 0;
-                return;
-
-            case 8:
-                __tmp[ 0] = 0; __tmp[ 1] = 0;
-                __tmp[ 2] = 0; __tmp[ 3] = 0;
-                __tmp[ 4] = 0; __tmp[ 5] = 0;
-                __tmp[ 6] = 0; __tmp[ 7] = 0;
-                return;
-
-            case 4:
-                __tmp[ 0] = 0; __tmp[ 1] = 0;
-                __tmp[ 2] = 0; __tmp[ 3] = 0;
-                return;
-        }
-    }
-    __i = __FDSET_LONGS;
-    while (__i) {
-        __i--;
-        *__tmp = 0;
-        __tmp++;
-    }
-}
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* __ASM_AVR32_POSIX_TYPES_H */
diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
deleted file mode 100644
index 49a88f5a9d2f..000000000000
--- a/include/asm-avr32/processor.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_PROCESSOR_H
-#define __ASM_AVR32_PROCESSOR_H
-
-#include <asm/page.h>
-#include <asm/cache.h>
-
-#define TASK_SIZE	0x80000000
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-#endif
-
-#ifndef __ASSEMBLY__
-
-static inline void *current_text_addr(void)
-{
-	register void *pc asm("pc");
-	return pc;
-}
-
-enum arch_type {
-	ARCH_AVR32A,
-	ARCH_AVR32B,
-	ARCH_MAX
-};
-
-enum cpu_type {
-	CPU_MORGAN,
-	CPU_AT32AP,
-	CPU_MAX
-};
-
-enum tlb_config {
-	TLB_NONE,
-	TLB_SPLIT,
-	TLB_UNIFIED,
-	TLB_INVALID
-};
-
-#define AVR32_FEATURE_RMW	(1 << 0)
-#define AVR32_FEATURE_DSP	(1 << 1)
-#define AVR32_FEATURE_SIMD	(1 << 2)
-#define AVR32_FEATURE_OCD	(1 << 3)
-#define AVR32_FEATURE_PCTR	(1 << 4)
-#define AVR32_FEATURE_JAVA	(1 << 5)
-#define AVR32_FEATURE_FPU	(1 << 6)
-
-struct avr32_cpuinfo {
-	struct clk *clk;
-	unsigned long loops_per_jiffy;
-	enum arch_type arch_type;
-	enum cpu_type cpu_type;
-	unsigned short arch_revision;
-	unsigned short cpu_revision;
-	enum tlb_config tlb_config;
-	unsigned long features;
-	u32 device_id;
-
-	struct cache_info icache;
-	struct cache_info dcache;
-};
-
-static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
-{
-	return (cpu->device_id >> 1) & 0x7f;
-}
-static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
-{
-	return (cpu->device_id >> 12) & 0xffff;
-}
-static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
-{
-	return (cpu->device_id >> 28) & 0x0f;
-}
-
-extern struct avr32_cpuinfo boot_cpu_data;
-
-#ifdef CONFIG_SMP
-extern struct avr32_cpuinfo cpu_data[];
-#define current_cpu_data cpu_data[smp_processor_id()]
-#else
-#define cpu_data (&boot_cpu_data)
-#define current_cpu_data boot_cpu_data
-#endif
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's
- */
-#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
-
-#define cpu_relax()		barrier()
-#define cpu_sync_pipeline()	asm volatile("sub pc, -2" : : : "memory")
-
-struct cpu_context {
-	unsigned long sr;
-	unsigned long pc;
-	unsigned long ksp;	/* Kernel stack pointer */
-	unsigned long r7;
-	unsigned long r6;
-	unsigned long r5;
-	unsigned long r4;
-	unsigned long r3;
-	unsigned long r2;
-	unsigned long r1;
-	unsigned long r0;
-};
-
-/* This struct contains the CPU context as stored by switch_to() */
-struct thread_struct {
-	struct cpu_context cpu_context;
-	unsigned long single_step_addr;
-	u16 single_step_insn;
-};
-
-#define INIT_THREAD {						\
-	.cpu_context = {					\
-		.ksp = sizeof(init_stack) + (long)&init_stack,	\
-	},							\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(regs, new_pc, new_sp)	 \
-	do {					 \
-		set_fs(USER_DS);		 \
-		memset(regs, 0, sizeof(*regs));	 \
-		regs->sr = MODE_USER;		 \
-		regs->pc = new_pc & ~1;		 \
-		regs->sp = new_sp;		 \
-	} while(0)
-
-struct task_struct;
-
-/* Free all resources held by a thread */
-extern void release_thread(struct task_struct *);
-
-/* Create a kernel thread without removing it from tasklists */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while(0)
-
-/* Return saved PC of a blocked thread */
-#define thread_saved_pc(tsk)    ((tsk)->thread.cpu_context.pc)
-
-struct pt_regs;
-extern unsigned long get_wchan(struct task_struct *p);
-extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
-extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
-			       struct pt_regs *regs, const char *log_lvl);
-
-#define task_pt_regs(p) \
-	((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
-
-#define KSTK_EIP(tsk)	((tsk)->thread.cpu_context.pc)
-#define KSTK_ESP(tsk)	((tsk)->thread.cpu_context.ksp)
-
-#define ARCH_HAS_PREFETCH
-
-static inline void prefetch(const void *x)
-{
-	const char *c = x;
-	asm volatile("pref %0" : : "r"(c));
-}
-#define PREFETCH_STRIDE	L1_CACHE_BYTES
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_AVR32_PROCESSOR_H */
diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h
deleted file mode 100644
index 9e2d44f4e0fe..000000000000
--- a/include/asm-avr32/ptrace.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_PTRACE_H
-#define __ASM_AVR32_PTRACE_H
-
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-
-/*
- * Status Register bits
- */
-#define SR_H		0x20000000
-#define SR_J		0x10000000
-#define SR_DM		0x08000000
-#define SR_D		0x04000000
-#define MODE_NMI	0x01c00000
-#define MODE_EXCEPTION	0x01800000
-#define MODE_INT3	0x01400000
-#define MODE_INT2	0x01000000
-#define MODE_INT1	0x00c00000
-#define MODE_INT0	0x00800000
-#define MODE_SUPERVISOR	0x00400000
-#define MODE_USER	0x00000000
-#define MODE_MASK	0x01c00000
-#define SR_EM		0x00200000
-#define SR_I3M		0x00100000
-#define SR_I2M		0x00080000
-#define SR_I1M		0x00040000
-#define SR_I0M		0x00020000
-#define SR_GM		0x00010000
-
-#define SR_H_BIT	29
-#define SR_J_BIT	28
-#define SR_DM_BIT	27
-#define SR_D_BIT	26
-#define MODE_SHIFT	22
-#define SR_EM_BIT	21
-#define SR_I3M_BIT	20
-#define SR_I2M_BIT	19
-#define SR_I1M_BIT	18
-#define SR_I0M_BIT	17
-#define SR_GM_BIT	16
-
-/* The user-visible part */
-#define SR_L		0x00000020
-#define SR_Q		0x00000010
-#define SR_V		0x00000008
-#define SR_N		0x00000004
-#define SR_Z		0x00000002
-#define SR_C		0x00000001
-
-#define SR_L_BIT	5
-#define SR_Q_BIT	4
-#define SR_V_BIT	3
-#define SR_N_BIT	2
-#define SR_Z_BIT	1
-#define SR_C_BIT	0
-
-/*
- * The order is defined by the stmts instruction. r0 is stored first,
- * so it gets the highest address.
- *
- * Registers 0-12 are general-purpose registers (r12 is normally used for
- * the function return value).
- * Register 13 is the stack pointer
- * Register 14 is the link register
- * Register 15 is the program counter (retrieved from the RAR sysreg)
- */
-#define FRAME_SIZE_FULL 72
-#define REG_R12_ORIG	68
-#define REG_R0		64
-#define REG_R1		60
-#define REG_R2		56
-#define REG_R3		52
-#define REG_R4		48
-#define REG_R5		44
-#define REG_R6		40
-#define REG_R7		36
-#define REG_R8		32
-#define REG_R9		28
-#define REG_R10		24
-#define REG_R11		20
-#define REG_R12		16
-#define REG_SP		12
-#define REG_LR		 8
-
-#define FRAME_SIZE_MIN	 8
-#define REG_PC		 4
-#define REG_SR		 0
-
-#ifndef __ASSEMBLY__
-struct pt_regs {
-	/* These are always saved */
-	unsigned long sr;
-	unsigned long pc;
-
-	/* These are sometimes saved */
-	unsigned long lr;
-	unsigned long sp;
-	unsigned long r12;
-	unsigned long r11;
-	unsigned long r10;
-	unsigned long r9;
-	unsigned long r8;
-	unsigned long r7;
-	unsigned long r6;
-	unsigned long r5;
-	unsigned long r4;
-	unsigned long r3;
-	unsigned long r2;
-	unsigned long r1;
-	unsigned long r0;
-
-	/* Only saved on system call */
-	unsigned long r12_orig;
-};
-
-#ifdef __KERNEL__
-
-#include <asm/ocd.h>
-
-#define arch_ptrace_attach(child)       ocd_enable(child)
-
-#define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
-#define instruction_pointer(regs)       ((regs)->pc)
-#define profile_pc(regs)                instruction_pointer(regs)
-
-extern void show_regs (struct pt_regs *);
-
-static __inline__ int valid_user_regs(struct pt_regs *regs)
-{
-	/*
-	 * Some of the Java bits might be acceptable if/when we
-	 * implement some support for that stuff...
-	 */
-	if ((regs->sr & 0xffff0000) == 0)
-		return 1;
-
-	/*
-	 * Force status register flags to be sane and report this
-	 * illegal behaviour...
-	 */
-	regs->sr &= 0x0000ffff;
-	return 0;
-}
-
-
-#endif /* __KERNEL__ */
-
-#endif /* ! __ASSEMBLY__ */
-
-#endif /* __ASM_AVR32_PTRACE_H */
diff --git a/include/asm-avr32/resource.h b/include/asm-avr32/resource.h
deleted file mode 100644
index c6dd101472b1..000000000000
--- a/include/asm-avr32/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_RESOURCE_H
-#define __ASM_AVR32_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_AVR32_RESOURCE_H */
diff --git a/include/asm-avr32/scatterlist.h b/include/asm-avr32/scatterlist.h
deleted file mode 100644
index 377320e3bd17..000000000000
--- a/include/asm-avr32/scatterlist.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_AVR32_SCATTERLIST_H
-#define __ASM_AVR32_SCATTERLIST_H
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-   unsigned long	sg_magic;
-#endif
-    unsigned long	page_link;
-    unsigned int	offset;
-    dma_addr_t		dma_address;
-    unsigned int	length;
-};
-
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
-#endif /* __ASM_AVR32_SCATTERLIST_H */
diff --git a/include/asm-avr32/sections.h b/include/asm-avr32/sections.h
deleted file mode 100644
index aa14252e4181..000000000000
--- a/include/asm-avr32/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_SECTIONS_H
-#define __ASM_AVR32_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/include/asm-avr32/semaphore.h b/include/asm-avr32/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-avr32/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-avr32/sembuf.h b/include/asm-avr32/sembuf.h
deleted file mode 100644
index e472216e0c97..000000000000
--- a/include/asm-avr32/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_AVR32_SEMBUF_H
-#define __ASM_AVR32_SEMBUF_H
-
-/*
-* The semid64_ds structure for AVR32 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
-        __kernel_time_t sem_otime;              /* last semop time */
-        unsigned long   __unused1;
-        __kernel_time_t sem_ctime;              /* last change time */
-        unsigned long   __unused2;
-        unsigned long   sem_nsems;              /* no. of semaphores in array */
-        unsigned long   __unused3;
-        unsigned long   __unused4;
-};
-
-#endif /* __ASM_AVR32_SEMBUF_H */
diff --git a/include/asm-avr32/serial.h b/include/asm-avr32/serial.h
deleted file mode 100644
index 5ecaebc22b02..000000000000
--- a/include/asm-avr32/serial.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASM_SERIAL_H
-#define _ASM_SERIAL_H
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-avr32/setup.h b/include/asm-avr32/setup.h
deleted file mode 100644
index ff5b7cf6be4d..000000000000
--- a/include/asm-avr32/setup.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * Based on linux/include/asm-arm/setup.h
- *   Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_SETUP_H__
-#define __ASM_AVR32_SETUP_H__
-
-#define COMMAND_LINE_SIZE 256
-
-#ifdef __KERNEL__
-
-/* Magic number indicating that a tag table is present */
-#define ATAG_MAGIC	0xa2a25441
-
-#ifndef __ASSEMBLY__
-
-/*
- * Generic memory range, used by several tags.
- *
- *   addr is always physical.
- *   size is measured in bytes.
- *   next is for use by the OS, e.g. for grouping regions into
- *        linked lists.
- */
-struct tag_mem_range {
-	u32			addr;
-	u32			size;
-	struct tag_mem_range *	next;
-};
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE	0x00000000
-
-struct tag_header {
-	u32 size;
-	u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE	0x54410001
-
-struct tag_core {
-	u32 flags;
-	u32 pagesize;
-	u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM	0x54410002
-/* ATAG_MEM uses tag_mem_range */
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE	0x54410003
-
-struct tag_cmdline {
-	char	cmdline[1];	/* this is the minimum size */
-};
-
-/* Ramdisk image (may be compressed) */
-#define ATAG_RDIMG	0x54410004
-/* ATAG_RDIMG uses tag_mem_range */
-
-/* Information about various clocks present in the system */
-#define ATAG_CLOCK	0x54410005
-
-struct tag_clock {
-	u32	clock_id;	/* Which clock are we talking about? */
-	u32	clock_flags;	/* Special features */
-	u64	clock_hz;	/* Clock speed in Hz */
-};
-
-/* The clock types we know about */
-#define CLOCK_BOOTCPU	0
-
-/* Memory reserved for the system (e.g. the bootloader) */
-#define ATAG_RSVD_MEM	0x54410006
-/* ATAG_RSVD_MEM uses tag_mem_range */
-
-/* Ethernet information */
-
-#define ATAG_ETHERNET	0x54410007
-
-struct tag_ethernet {
-	u8	mac_index;
-	u8	mii_phy_addr;
-	u8	hw_address[6];
-};
-
-#define ETH_INVALID_PHY	0xff
-
-struct tag {
-	struct tag_header hdr;
-	union {
-		struct tag_core core;
-		struct tag_mem_range mem_range;
-		struct tag_cmdline cmdline;
-		struct tag_clock clock;
-		struct tag_ethernet ethernet;
-	} u;
-};
-
-struct tagtable {
-	u32	tag;
-	int	(*parse)(struct tag *);
-};
-
-#define __tag __used __attribute__((__section__(".taglist.init")))
-#define __tagtable(tag, fn)						\
-	static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-#define tag_member_present(tag,member)					\
-	((unsigned long)(&((struct tag *)0L)->member + 1)		\
-	 <= (tag)->hdr.size * 4)
-
-#define tag_next(t)	((struct tag *)((u32 *)(t) + (t)->hdr.size))
-#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base)						\
-	for (t = base; t->hdr.size; t = tag_next(t))
-
-extern struct tag *bootloader_tags;
-
-extern resource_size_t fbmem_start;
-extern resource_size_t fbmem_size;
-
-void setup_processor(void);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif  /*  __KERNEL__  */
-
-#endif /* __ASM_AVR32_SETUP_H__ */
diff --git a/include/asm-avr32/shmbuf.h b/include/asm-avr32/shmbuf.h
deleted file mode 100644
index c62fba41739a..000000000000
--- a/include/asm-avr32/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __ASM_AVR32_SHMBUF_H
-#define __ASM_AVR32_SHMBUF_H
-
-/*
- * The shmid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __ASM_AVR32_SHMBUF_H */
diff --git a/include/asm-avr32/shmparam.h b/include/asm-avr32/shmparam.h
deleted file mode 100644
index 3681266c77f7..000000000000
--- a/include/asm-avr32/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_SHMPARAM_H
-#define __ASM_AVR32_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE	/* attach addr a multiple of this */
-
-#endif /* __ASM_AVR32_SHMPARAM_H */
diff --git a/include/asm-avr32/sigcontext.h b/include/asm-avr32/sigcontext.h
deleted file mode 100644
index e04062b5f39f..000000000000
--- a/include/asm-avr32/sigcontext.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_SIGCONTEXT_H
-#define __ASM_AVR32_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-	/* CPU registers */
-	unsigned long	sr;
-	unsigned long	pc;
-	unsigned long	lr;
-	unsigned long	sp;
-	unsigned long	r12;
-	unsigned long	r11;
-	unsigned long	r10;
-	unsigned long	r9;
-	unsigned long	r8;
-	unsigned long	r7;
-	unsigned long	r6;
-	unsigned long	r5;
-	unsigned long	r4;
-	unsigned long	r3;
-	unsigned long	r2;
-	unsigned long	r1;
-	unsigned long	r0;
-};
-
-#endif /* __ASM_AVR32_SIGCONTEXT_H */
diff --git a/include/asm-avr32/siginfo.h b/include/asm-avr32/siginfo.h
deleted file mode 100644
index 5ee93f40a8a8..000000000000
--- a/include/asm-avr32/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _AVR32_SIGINFO_H
-#define _AVR32_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/include/asm-avr32/signal.h b/include/asm-avr32/signal.h
deleted file mode 100644
index caffefeeba1f..000000000000
--- a/include/asm-avr32/signal.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_SIGNAL_H
-#define __ASM_AVR32_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	(_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
- * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
- * SA_SIGINFO		deliver the signal with SIGINFO structs
- * SA_ONSTACK		indicates that a registered stack_t will be used.
- * SA_RESTART		flag to get restarting signals (which were the default long ago)
- * SA_NODEFER		prevents the current signal from being masked in the handler.
- * SA_RESETHAND		clears the handler when the signal is delivered.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_RESTORER	0x04000000
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-		__sighandler_t _sa_handler;
-		void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-avr32/socket.h b/include/asm-avr32/socket.h
deleted file mode 100644
index 35863f260929..000000000000
--- a/include/asm-avr32/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __ASM_AVR32_SOCKET_H
-#define __ASM_AVR32_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* __ASM_AVR32_SOCKET_H */
diff --git a/include/asm-avr32/sockios.h b/include/asm-avr32/sockios.h
deleted file mode 100644
index 0802d742f97d..000000000000
--- a/include/asm-avr32/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_AVR32_SOCKIOS_H
-#define __ASM_AVR32_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* __ASM_AVR32_SOCKIOS_H */
diff --git a/include/asm-avr32/stat.h b/include/asm-avr32/stat.h
deleted file mode 100644
index e72881e10230..000000000000
--- a/include/asm-avr32/stat.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_STAT_H
-#define __ASM_AVR32_STAT_H
-
-struct __old_kernel_stat {
-        unsigned short st_dev;
-        unsigned short st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned short st_rdev;
-        unsigned long  st_size;
-        unsigned long  st_atime;
-        unsigned long  st_mtime;
-        unsigned long  st_ctime;
-};
-
-struct stat {
-        unsigned long st_dev;
-        unsigned long st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned long  st_rdev;
-        unsigned long  st_size;
-        unsigned long  st_blksize;
-        unsigned long  st_blocks;
-        unsigned long  st_atime;
-        unsigned long  st_atime_nsec;
-        unsigned long  st_mtime;
-        unsigned long  st_mtime_nsec;
-        unsigned long  st_ctime;
-        unsigned long  st_ctime_nsec;
-        unsigned long  __unused4;
-        unsigned long  __unused5;
-};
-
-#define STAT_HAVE_NSEC 1
-
-struct stat64 {
-	unsigned long long st_dev;
-
-	unsigned long long st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long st_rdev;
-
-	long long	st_size;
-	unsigned long	__pad1;		/* align 64-bit st_blocks */
-	unsigned long	st_blksize;
-
-	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* __ASM_AVR32_STAT_H */
diff --git a/include/asm-avr32/statfs.h b/include/asm-avr32/statfs.h
deleted file mode 100644
index 2961bd18c50e..000000000000
--- a/include/asm-avr32/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_STATFS_H
-#define __ASM_AVR32_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_AVR32_STATFS_H */
diff --git a/include/asm-avr32/string.h b/include/asm-avr32/string.h
deleted file mode 100644
index c91a623cd585..000000000000
--- a/include/asm-avr32/string.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_STRING_H
-#define __ASM_AVR32_STRING_H
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *b, int c, size_t len);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *to, const void *from, size_t len);
-
-#endif /* __ASM_AVR32_STRING_H */
diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h
deleted file mode 100644
index d4e0950170ca..000000000000
--- a/include/asm-avr32/sysreg.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * AVR32 System Registers
- *
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_SYSREG_H
-#define __ASM_AVR32_SYSREG_H
-
-/* sysreg register offsets */
-#define SYSREG_SR				0x0000
-#define SYSREG_EVBA				0x0004
-#define SYSREG_ACBA				0x0008
-#define SYSREG_CPUCR				0x000c
-#define SYSREG_ECR				0x0010
-#define SYSREG_RSR_SUP				0x0014
-#define SYSREG_RSR_INT0				0x0018
-#define SYSREG_RSR_INT1				0x001c
-#define SYSREG_RSR_INT2				0x0020
-#define SYSREG_RSR_INT3				0x0024
-#define SYSREG_RSR_EX				0x0028
-#define SYSREG_RSR_NMI				0x002c
-#define SYSREG_RSR_DBG				0x0030
-#define SYSREG_RAR_SUP				0x0034
-#define SYSREG_RAR_INT0				0x0038
-#define SYSREG_RAR_INT1				0x003c
-#define SYSREG_RAR_INT2				0x0040
-#define SYSREG_RAR_INT3				0x0044
-#define SYSREG_RAR_EX				0x0048
-#define SYSREG_RAR_NMI				0x004c
-#define SYSREG_RAR_DBG				0x0050
-#define SYSREG_JECR				0x0054
-#define SYSREG_JOSP				0x0058
-#define SYSREG_JAVA_LV0				0x005c
-#define SYSREG_JAVA_LV1				0x0060
-#define SYSREG_JAVA_LV2				0x0064
-#define SYSREG_JAVA_LV3				0x0068
-#define SYSREG_JAVA_LV4				0x006c
-#define SYSREG_JAVA_LV5				0x0070
-#define SYSREG_JAVA_LV6				0x0074
-#define SYSREG_JAVA_LV7				0x0078
-#define SYSREG_JTBA				0x007c
-#define SYSREG_JBCR				0x0080
-#define SYSREG_CONFIG0				0x0100
-#define SYSREG_CONFIG1				0x0104
-#define SYSREG_COUNT				0x0108
-#define SYSREG_COMPARE				0x010c
-#define SYSREG_TLBEHI				0x0110
-#define SYSREG_TLBELO				0x0114
-#define SYSREG_PTBR				0x0118
-#define SYSREG_TLBEAR				0x011c
-#define SYSREG_MMUCR				0x0120
-#define SYSREG_TLBARLO				0x0124
-#define SYSREG_TLBARHI				0x0128
-#define SYSREG_PCCNT				0x012c
-#define SYSREG_PCNT0				0x0130
-#define SYSREG_PCNT1				0x0134
-#define SYSREG_PCCR				0x0138
-#define SYSREG_BEAR				0x013c
-#define SYSREG_SABAL				0x0300
-#define SYSREG_SABAH				0x0304
-#define SYSREG_SABD				0x0308
-
-/* Bitfields in SR */
-#define SYSREG_SR_C_OFFSET			0
-#define SYSREG_SR_C_SIZE			1
-#define SYSREG_Z_OFFSET				1
-#define SYSREG_Z_SIZE				1
-#define SYSREG_SR_N_OFFSET			2
-#define SYSREG_SR_N_SIZE			1
-#define SYSREG_SR_V_OFFSET			3
-#define SYSREG_SR_V_SIZE			1
-#define SYSREG_Q_OFFSET				4
-#define SYSREG_Q_SIZE				1
-#define SYSREG_L_OFFSET				5
-#define SYSREG_L_SIZE				1
-#define SYSREG_T_OFFSET				14
-#define SYSREG_T_SIZE				1
-#define SYSREG_SR_R_OFFSET			15
-#define SYSREG_SR_R_SIZE			1
-#define SYSREG_GM_OFFSET			16
-#define SYSREG_GM_SIZE				1
-#define SYSREG_I0M_OFFSET			17
-#define SYSREG_I0M_SIZE				1
-#define SYSREG_I1M_OFFSET			18
-#define SYSREG_I1M_SIZE				1
-#define SYSREG_I2M_OFFSET			19
-#define SYSREG_I2M_SIZE				1
-#define SYSREG_I3M_OFFSET			20
-#define SYSREG_I3M_SIZE				1
-#define SYSREG_EM_OFFSET			21
-#define SYSREG_EM_SIZE				1
-#define SYSREG_MODE_OFFSET			22
-#define SYSREG_MODE_SIZE			3
-#define SYSREG_M0_OFFSET			22
-#define SYSREG_M0_SIZE				1
-#define SYSREG_M1_OFFSET			23
-#define SYSREG_M1_SIZE				1
-#define SYSREG_M2_OFFSET			24
-#define SYSREG_M2_SIZE				1
-#define SYSREG_SR_D_OFFSET			26
-#define SYSREG_SR_D_SIZE			1
-#define SYSREG_DM_OFFSET			27
-#define SYSREG_DM_SIZE				1
-#define SYSREG_SR_J_OFFSET			28
-#define SYSREG_SR_J_SIZE			1
-#define SYSREG_H_OFFSET				29
-#define SYSREG_H_SIZE				1
-
-/* Bitfields in CPUCR */
-#define SYSREG_BI_OFFSET			0
-#define SYSREG_BI_SIZE				1
-#define SYSREG_BE_OFFSET			1
-#define SYSREG_BE_SIZE				1
-#define SYSREG_FE_OFFSET			2
-#define SYSREG_FE_SIZE				1
-#define SYSREG_RE_OFFSET			3
-#define SYSREG_RE_SIZE				1
-#define SYSREG_IBE_OFFSET			4
-#define SYSREG_IBE_SIZE				1
-#define SYSREG_IEE_OFFSET			5
-#define SYSREG_IEE_SIZE				1
-
-/* Bitfields in CONFIG0 */
-#define SYSREG_CONFIG0_R_OFFSET			0
-#define SYSREG_CONFIG0_R_SIZE			1
-#define SYSREG_CONFIG0_D_OFFSET			1
-#define SYSREG_CONFIG0_D_SIZE			1
-#define SYSREG_CONFIG0_S_OFFSET			2
-#define SYSREG_CONFIG0_S_SIZE			1
-#define SYSREG_CONFIG0_O_OFFSET			3
-#define SYSREG_CONFIG0_O_SIZE			1
-#define SYSREG_CONFIG0_P_OFFSET			4
-#define SYSREG_CONFIG0_P_SIZE			1
-#define SYSREG_CONFIG0_J_OFFSET			5
-#define SYSREG_CONFIG0_J_SIZE			1
-#define SYSREG_CONFIG0_F_OFFSET			6
-#define SYSREG_CONFIG0_F_SIZE			1
-#define SYSREG_MMUT_OFFSET			7
-#define SYSREG_MMUT_SIZE			3
-#define SYSREG_AR_OFFSET			10
-#define SYSREG_AR_SIZE				3
-#define SYSREG_AT_OFFSET			13
-#define SYSREG_AT_SIZE				3
-#define SYSREG_PROCESSORREVISION_OFFSET		16
-#define SYSREG_PROCESSORREVISION_SIZE		8
-#define SYSREG_PROCESSORID_OFFSET		24
-#define SYSREG_PROCESSORID_SIZE			8
-
-/* Bitfields in CONFIG1 */
-#define SYSREG_DASS_OFFSET			0
-#define SYSREG_DASS_SIZE			3
-#define SYSREG_DLSZ_OFFSET			3
-#define SYSREG_DLSZ_SIZE			3
-#define SYSREG_DSET_OFFSET			6
-#define SYSREG_DSET_SIZE			4
-#define SYSREG_IASS_OFFSET			10
-#define SYSREG_IASS_SIZE			3
-#define SYSREG_ILSZ_OFFSET			13
-#define SYSREG_ILSZ_SIZE			3
-#define SYSREG_ISET_OFFSET			16
-#define SYSREG_ISET_SIZE			4
-#define SYSREG_DMMUSZ_OFFSET			20
-#define SYSREG_DMMUSZ_SIZE			6
-#define SYSREG_IMMUSZ_OFFSET			26
-#define SYSREG_IMMUSZ_SIZE			6
-
-/* Bitfields in TLBEHI */
-#define SYSREG_ASID_OFFSET			0
-#define SYSREG_ASID_SIZE			8
-#define SYSREG_TLBEHI_I_OFFSET			8
-#define SYSREG_TLBEHI_I_SIZE			1
-#define SYSREG_TLBEHI_V_OFFSET			9
-#define SYSREG_TLBEHI_V_SIZE			1
-#define SYSREG_VPN_OFFSET			10
-#define SYSREG_VPN_SIZE				22
-
-/* Bitfields in TLBELO */
-#define SYSREG_W_OFFSET				0
-#define SYSREG_W_SIZE				1
-#define SYSREG_TLBELO_D_OFFSET			1
-#define SYSREG_TLBELO_D_SIZE			1
-#define SYSREG_SZ_OFFSET			2
-#define SYSREG_SZ_SIZE				2
-#define SYSREG_AP_OFFSET			4
-#define SYSREG_AP_SIZE				3
-#define SYSREG_B_OFFSET				7
-#define SYSREG_B_SIZE				1
-#define SYSREG_G_OFFSET				8
-#define SYSREG_G_SIZE				1
-#define SYSREG_TLBELO_C_OFFSET			9
-#define SYSREG_TLBELO_C_SIZE			1
-#define SYSREG_PFN_OFFSET			10
-#define SYSREG_PFN_SIZE				22
-
-/* Bitfields in MMUCR */
-#define SYSREG_E_OFFSET				0
-#define SYSREG_E_SIZE				1
-#define SYSREG_M_OFFSET				1
-#define SYSREG_M_SIZE				1
-#define SYSREG_MMUCR_I_OFFSET			2
-#define SYSREG_MMUCR_I_SIZE			1
-#define SYSREG_MMUCR_N_OFFSET			3
-#define SYSREG_MMUCR_N_SIZE			1
-#define SYSREG_MMUCR_S_OFFSET			4
-#define SYSREG_MMUCR_S_SIZE			1
-#define SYSREG_DLA_OFFSET			8
-#define SYSREG_DLA_SIZE				6
-#define SYSREG_DRP_OFFSET			14
-#define SYSREG_DRP_SIZE				6
-#define SYSREG_ILA_OFFSET			20
-#define SYSREG_ILA_SIZE				6
-#define SYSREG_IRP_OFFSET			26
-#define SYSREG_IRP_SIZE				6
-
-/* Bitfields in PCCR */
-#define SYSREG_PCCR_E_OFFSET			0
-#define SYSREG_PCCR_E_SIZE			1
-#define SYSREG_PCCR_R_OFFSET			1
-#define SYSREG_PCCR_R_SIZE			1
-#define SYSREG_PCCR_C_OFFSET			2
-#define SYSREG_PCCR_C_SIZE			1
-#define SYSREG_PCCR_S_OFFSET			3
-#define SYSREG_PCCR_S_SIZE			1
-#define SYSREG_IEC_OFFSET			4
-#define SYSREG_IEC_SIZE				1
-#define SYSREG_IE0_OFFSET			5
-#define SYSREG_IE0_SIZE				1
-#define SYSREG_IE1_OFFSET			6
-#define SYSREG_IE1_SIZE				1
-#define SYSREG_FC_OFFSET			8
-#define SYSREG_FC_SIZE				1
-#define SYSREG_F0_OFFSET			9
-#define SYSREG_F0_SIZE				1
-#define SYSREG_F1_OFFSET			10
-#define SYSREG_F1_SIZE				1
-#define SYSREG_CONF0_OFFSET			12
-#define SYSREG_CONF0_SIZE			6
-#define SYSREG_CONF1_OFFSET			18
-#define SYSREG_CONF1_SIZE			6
-
-/* Constants for ECR */
-#define ECR_UNRECOVERABLE			0
-#define ECR_TLB_MULTIPLE			1
-#define ECR_BUS_ERROR_WRITE			2
-#define ECR_BUS_ERROR_READ			3
-#define ECR_NMI					4
-#define ECR_ADDR_ALIGN_X			5
-#define ECR_PROTECTION_X			6
-#define ECR_DEBUG				7
-#define ECR_ILLEGAL_OPCODE			8
-#define ECR_UNIMPL_INSTRUCTION			9
-#define ECR_PRIVILEGE_VIOLATION			10
-#define ECR_FPE					11
-#define ECR_COPROC_ABSENT			12
-#define ECR_ADDR_ALIGN_R			13
-#define ECR_ADDR_ALIGN_W			14
-#define ECR_PROTECTION_R			15
-#define ECR_PROTECTION_W			16
-#define ECR_DTLB_MODIFIED			17
-#define ECR_TLB_MISS_X				20
-#define ECR_TLB_MISS_R				24
-#define ECR_TLB_MISS_W				28
-
-/* Bit manipulation macros */
-#define SYSREG_BIT(name)				\
-	(1 << SYSREG_##name##_OFFSET)
-#define SYSREG_BF(name,value)				\
-	(((value) & ((1 << SYSREG_##name##_SIZE) - 1))	\
-	 << SYSREG_##name##_OFFSET)
-#define SYSREG_BFEXT(name,value)\
-	(((value) >> SYSREG_##name##_OFFSET)		\
-	 & ((1 << SYSREG_##name##_SIZE) - 1))
-#define SYSREG_BFINS(name,value,old)			\
-	(((old) & ~(((1 << SYSREG_##name##_SIZE) - 1)	\
-		    << SYSREG_##name##_OFFSET))		\
-	 | SYSREG_BF(name,value))
-
-/* Register access macros */
-#ifdef __CHECKER__
-extern unsigned long __builtin_mfsr(unsigned long reg);
-extern void __builtin_mtsr(unsigned long reg, unsigned long value);
-#endif
-
-#define sysreg_read(reg)		__builtin_mfsr(SYSREG_##reg)
-#define sysreg_write(reg, value)	__builtin_mtsr(SYSREG_##reg, value)
-
-#endif /* __ASM_AVR32_SYSREG_H */
diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
deleted file mode 100644
index 9702c2213e1e..000000000000
--- a/include/asm-avr32/system.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_SYSTEM_H
-#define __ASM_AVR32_SYSTEM_H
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-
-#include <asm/ptrace.h>
-#include <asm/sysreg.h>
-
-#define xchg(ptr,x) \
-	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-#define nop() asm volatile("nop")
-
-#define mb()			asm volatile("" : : : "memory")
-#define rmb()			mb()
-#define wmb()			asm volatile("sync 0" : : : "memory")
-#define read_barrier_depends()  do { } while(0)
-#define set_mb(var, value)      do { var = value; mb(); } while(0)
-
-/*
- * Help PathFinder and other Nexus-compliant debuggers keep track of
- * the current PID by emitting an Ownership Trace Message each time we
- * switch task.
- */
-#ifdef CONFIG_OWNERSHIP_TRACE
-#include <asm/ocd.h>
-#define finish_arch_switch(prev)			\
-	do {						\
-		ocd_write(PID, prev->pid);		\
-		ocd_write(PID, current->pid);		\
-	} while(0)
-#endif
-
-/*
- * switch_to(prev, next, last) should switch from task `prev' to task
- * `next'. `prev' will never be the same as `next'.
- *
- * We just delegate everything to the __switch_to assembly function,
- * which is implemented in arch/avr32/kernel/switch_to.S
- *
- * mb() tells GCC not to cache `current' across this call.
- */
-struct cpu_context;
-struct task_struct;
-extern struct task_struct *__switch_to(struct task_struct *,
-				       struct cpu_context *,
-				       struct cpu_context *);
-#define switch_to(prev, next, last)					\
-	do {								\
-		last = __switch_to(prev, &prev->thread.cpu_context + 1,	\
-				   &next->thread.cpu_context);		\
-	} while (0)
-
-#ifdef CONFIG_SMP
-# error "The AVR32 port does not support SMP"
-#else
-# define smp_mb()		barrier()
-# define smp_rmb()		barrier()
-# define smp_wmb()		barrier()
-# define smp_read_barrier_depends() do { } while(0)
-#endif
-
-#include <linux/irqflags.h>
-
-extern void __xchg_called_with_bad_pointer(void);
-
-static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
-{
-	u32 ret;
-
-	asm volatile("xchg %[ret], %[m], %[val]"
-			: [ret] "=&r"(ret), "=m"(*m)
-			: "m"(*m), [m] "r"(m), [val] "r"(val)
-			: "memory");
-	return ret;
-}
-
-static inline unsigned long __xchg(unsigned long x,
-				       volatile void *ptr,
-				       int size)
-{
-	switch(size) {
-	case 4:
-		return xchg_u32(x, ptr);
-	default:
-		__xchg_called_with_bad_pointer();
-		return x;
-	}
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
-					  unsigned long new)
-{
-	__u32 ret;
-
-	asm volatile(
-		"1:	ssrf	5\n"
-		"	ld.w	%[ret], %[m]\n"
-		"	cp.w	%[ret], %[old]\n"
-		"	brne	2f\n"
-		"	stcond	%[m], %[new]\n"
-		"	brne	1b\n"
-		"2:\n"
-		: [ret] "=&r"(ret), [m] "=m"(*m)
-		: "m"(m), [old] "ir"(old), [new] "r"(new)
-		: "memory", "cc");
-	return ret;
-}
-
-extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels(
-        volatile int * m, unsigned long old, unsigned long new);
-#define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32(ptr, old, new);
-	case 8:
-		return __cmpxchg_u64(ptr, old, new);
-	}
-
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#define cmpxchg(ptr, old, new)					\
-	((typeof(*(ptr)))__cmpxchg((ptr), (unsigned long)(old),	\
-				   (unsigned long)(new),	\
-				   sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg-local.h>
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-				      unsigned long old,
-				      unsigned long new, int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32(ptr, old, new);
-	default:
-		return __cmpxchg_local_generic(ptr, old, new, size);
-	}
-
-	return old;
-}
-
-#define cmpxchg_local(ptr, old, new)					\
-	((typeof(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(old),	\
-				   (unsigned long)(new),		\
-				   sizeof(*(ptr))))
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-struct pt_regs;
-void NORET_TYPE die(const char *str, struct pt_regs *regs, long err);
-void _exception(long signr, struct pt_regs *regs, int code,
-		unsigned long addr);
-
-#define arch_align_stack(x)	(x)
-
-#endif /* __ASM_AVR32_SYSTEM_H */
diff --git a/include/asm-avr32/termbits.h b/include/asm-avr32/termbits.h
deleted file mode 100644
index db2daab31fdb..000000000000
--- a/include/asm-avr32/termbits.h
+++ /dev/null
@@ -1,195 +0,0 @@
-#ifndef __ASM_AVR32_TERMBITS_H
-#define __ASM_AVR32_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate (not used) */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __ASM_AVR32_TERMBITS_H */
diff --git a/include/asm-avr32/termios.h b/include/asm-avr32/termios.h
deleted file mode 100644
index 0152aba35154..000000000000
--- a/include/asm-avr32/termios.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_TERMIOS_H
-#define __ASM_AVR32_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-#include <asm-generic/termios.h>
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __ASM_AVR32_TERMIOS_H */
diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
deleted file mode 100644
index df68631b7b27..000000000000
--- a/include/asm-avr32/thread_info.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_THREAD_INFO_H
-#define __ASM_AVR32_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-struct task_struct;
-struct exec_domain;
-
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	__u32			cpu;
-	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
-	__u32			rar_saved;	/* return address... */
-	__u32			rsr_saved;	/* ...and status register
-						   saved by debug handler
-						   when setting up
-						   trampoline */
-	struct restart_block	restart_block;
-	__u8			supervisor_stack[0];
-};
-
-#define INIT_THREAD_INFO(tsk)						\
-{									\
-	.task		= &tsk,						\
-	.exec_domain	= &default_exec_domain,				\
-	.flags		= 0,						\
-	.cpu		= 0,						\
-	.preempt_count	= 1,						\
-	.restart_block	= {						\
-		.fn	= do_no_restart_syscall				\
-	}								\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/*
- * Get the thread information struct from C.
- * We do the usual trick and use the lower end of the stack for this
- */
-static inline struct thread_info *current_thread_info(void)
-{
-	unsigned long addr = ~(THREAD_SIZE - 1);
-
-	asm("and %0, sp" : "=r"(addr) : "0"(addr));
-	return (struct thread_info *)addr;
-}
-
-/* thread information allocation */
-#define alloc_thread_info(ti) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#define free_thread_info(ti) free_pages((unsigned long)(ti), 1)
-#define get_thread_info(ti) get_task_struct((ti)->task)
-#define put_thread_info(ti) put_task_struct((ti)->task)
-
-#endif /* !__ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE		0x40000000
-
-/*
- * Thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
-#define TIF_SIGPENDING          1       /* signal pending */
-#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_BREAKPOINT		4	/* enter monitor mode on return */
-#define TIF_SINGLE_STEP		5	/* single step in progress */
-#define TIF_MEMDIE		6
-#define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
-#define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
-#define TIF_FREEZE		29
-#define TIF_DEBUG		30	/* debugging enabled */
-#define TIF_USERSPACE		31      /* true if FS sets userspace */
-
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_SINGLE_STEP	(1 << TIF_SINGLE_STEP)
-#define _TIF_MEMDIE		(1 << TIF_MEMDIE)
-#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
-
-/* Note: The masks below must never span more than 16 bits! */
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK				\
-	((1 << TIF_SIGPENDING)			\
-	 | (1 << TIF_NEED_RESCHED)		\
-	 | (1 << TIF_POLLING_NRFLAG)		\
-	 | (1 << TIF_BREAKPOINT)		\
-	 | (1 << TIF_RESTORE_SIGMASK))
-
-/* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
-/* work to do on return from debug mode */
-#define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
-
-#endif /* __ASM_AVR32_THREAD_INFO_H */
diff --git a/include/asm-avr32/timex.h b/include/asm-avr32/timex.h
deleted file mode 100644
index 187dcf38b210..000000000000
--- a/include/asm-avr32/timex.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_TIMEX_H
-#define __ASM_AVR32_TIMEX_H
-
-/*
- * This is the frequency of the timer used for Linux's timer interrupt.
- * The value should be defined as accurate as possible or under certain
- * circumstances Linux timekeeping might become inaccurate or fail.
- *
- * For many system the exact clockrate of the timer isn't known but due to
- * the way this value is used we can get away with a wrong value as long
- * as this value is:
- *
- *  - a multiple of HZ
- *  - a divisor of the actual rate
- *
- * 500000 is a good such cheat value.
- *
- * The obscure number 1193182 is the same as used by the original i8254
- * time in legacy PC hardware; the chip is never found in AVR32 systems.
- */
-#define CLOCK_TICK_RATE		500000	/* Underlying HZ */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles (void)
-{
-	return 0;
-}
-
-#define ARCH_HAS_READ_CURRENT_TIMER
-
-#endif /* __ASM_AVR32_TIMEX_H */
diff --git a/include/asm-avr32/tlb.h b/include/asm-avr32/tlb.h
deleted file mode 100644
index 5c55f9ce7c7d..000000000000
--- a/include/asm-avr32/tlb.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_TLB_H
-#define __ASM_AVR32_TLB_H
-
-#define tlb_start_vma(tlb, vma) \
-	flush_cache_range(vma, vma->vm_start, vma->vm_end)
-
-#define tlb_end_vma(tlb, vma) \
-	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while(0)
-
-/*
- * Flush whole TLB for MM
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
-#include <asm-generic/tlb.h>
-
-/*
- * For debugging purposes
- */
-extern void show_dtlb_entry(unsigned int index);
-extern void dump_dtlb(void);
-
-#endif /* __ASM_AVR32_TLB_H */
diff --git a/include/asm-avr32/tlbflush.h b/include/asm-avr32/tlbflush.h
deleted file mode 100644
index bf90a786f6be..000000000000
--- a/include/asm-avr32/tlbflush.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_TLBFLUSH_H
-#define __ASM_AVR32_TLBFLUSH_H
-
-#include <asm/mmu.h>
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb() flushes the current mm struct TLBs
- *  - flush_tlb_all() flushes all processes' TLB entries
- *  - flush_tlb_mm(mm) flushes the specified mm context TLBs
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- */
-extern void flush_tlb(void);
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-			    unsigned long end);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
-
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-
-#endif /* __ASM_AVR32_TLBFLUSH_H */
diff --git a/include/asm-avr32/topology.h b/include/asm-avr32/topology.h
deleted file mode 100644
index 5b766cbb4806..000000000000
--- a/include/asm-avr32/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_TOPOLOGY_H
-#define __ASM_AVR32_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* __ASM_AVR32_TOPOLOGY_H */
diff --git a/include/asm-avr32/traps.h b/include/asm-avr32/traps.h
deleted file mode 100644
index 6a8fb944f414..000000000000
--- a/include/asm-avr32/traps.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_TRAPS_H
-#define __ASM_AVR32_TRAPS_H
-
-#include <linux/list.h>
-
-struct undef_hook {
-	struct list_head node;
-	u32 insn_mask;
-	u32 insn_val;
-	int (*fn)(struct pt_regs *regs, u32 insn);
-};
-
-void register_undef_hook(struct undef_hook *hook);
-void unregister_undef_hook(struct undef_hook *hook);
-
-#endif /* __ASM_AVR32_TRAPS_H */
diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h
deleted file mode 100644
index 9cefda6f534a..000000000000
--- a/include/asm-avr32/types.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_TYPES_H
-#define __ASM_AVR32_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-
-#endif /* __ASM_AVR32_TYPES_H */
diff --git a/include/asm-avr32/uaccess.h b/include/asm-avr32/uaccess.h
deleted file mode 100644
index ed092395215e..000000000000
--- a/include/asm-avr32/uaccess.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_UACCESS_H
-#define __ASM_AVR32_UACCESS_H
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-typedef struct {
-	unsigned int is_user_space;
-} mm_segment_t;
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-#define segment_eq(a,b)	((a).is_user_space == (b).is_user_space)
-
-#define USER_ADDR_LIMIT 0x80000000
-
-#define KERNEL_DS	MAKE_MM_SEG(0)
-#define USER_DS		MAKE_MM_SEG(1)
-
-#define get_ds()	(KERNEL_DS)
-
-static inline mm_segment_t get_fs(void)
-{
-	return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE));
-}
-
-static inline void set_fs(mm_segment_t s)
-{
-	if (s.is_user_space)
-		set_thread_flag(TIF_USERSPACE);
-	else
-		clear_thread_flag(TIF_USERSPACE);
-}
-
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- *
- * We do the following checks:
- *   1. Is the access from kernel space?
- *   2. Does (addr + size) set the carry bit?
- *   3. Is (addr + size) a negative number (i.e. >= 0x80000000)?
- *
- * If yes on the first check, access is granted.
- * If no on any of the others, access is denied.
- */
-#define __range_ok(addr, size)						\
-	(test_thread_flag(TIF_USERSPACE)				\
-	 && (((unsigned long)(addr) >= 0x80000000)			\
-	     || ((unsigned long)(size) > 0x80000000)			\
-	     || (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000)))
-
-#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
-
-/* Generic arbitrary sized copy. Return the number of bytes NOT copied */
-extern __kernel_size_t __copy_user(void *to, const void *from,
-				   __kernel_size_t n);
-
-extern __kernel_size_t copy_to_user(void __user *to, const void *from,
-				    __kernel_size_t n);
-extern __kernel_size_t copy_from_user(void *to, const void __user *from,
-				      __kernel_size_t n);
-
-static inline __kernel_size_t __copy_to_user(void __user *to, const void *from,
-					     __kernel_size_t n)
-{
-	return __copy_user((void __force *)to, from, n);
-}
-static inline __kernel_size_t __copy_from_user(void *to,
-					       const void __user *from,
-					       __kernel_size_t n)
-{
-	return __copy_user(to, (const void __force *)from, n);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/*
- * put_user: - Write a simple value into user space.
- * @x:   Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define put_user(x,ptr)	\
-	__put_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * get_user: - Get a simple variable from user space.
- * @x:   Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define get_user(x,ptr) \
-	__get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * __put_user: - Write a simple value into user space, with less checking.
- * @x:   Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define __put_user(x,ptr) \
-	__put_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-/*
- * __get_user: - Get a simple variable from user space, with less checking.
- * @x:   Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only.  This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space.  It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define __get_user(x,ptr) \
-	__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-extern int __get_user_bad(void);
-extern int __put_user_bad(void);
-
-#define __get_user_nocheck(x, ptr, size)				\
-({									\
-	unsigned long __gu_val = 0;					\
-	int __gu_err = 0;						\
-									\
-	switch (size) {							\
-	case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break;	\
-	case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break;	\
-	case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break;	\
-	default: __gu_err = __get_user_bad(); break;			\
-	}								\
-									\
-	x = (typeof(*(ptr)))__gu_val;					\
-	__gu_err;							\
-})
-
-#define __get_user_check(x, ptr, size)					\
-({									\
-	unsigned long __gu_val = 0;					\
-	const typeof(*(ptr)) __user * __gu_addr = (ptr);		\
-	int __gu_err = 0;						\
-									\
-	if (access_ok(VERIFY_READ, __gu_addr, size)) {			\
-		switch (size) {						\
-		case 1:							\
-			__get_user_asm("ub", __gu_val, __gu_addr,	\
-				       __gu_err);			\
-			break;						\
-		case 2:							\
-			__get_user_asm("uh", __gu_val, __gu_addr,	\
-				       __gu_err);			\
-			break;						\
-		case 4:							\
-			__get_user_asm("w", __gu_val, __gu_addr,	\
-				       __gu_err);			\
-			break;						\
-		default:						\
-			__gu_err = __get_user_bad();			\
-			break;						\
-		}							\
-	} else {							\
-		__gu_err = -EFAULT;					\
-	}								\
-	x = (typeof(*(ptr)))__gu_val;					\
-	__gu_err;							\
-})
-
-#define __get_user_asm(suffix, __gu_val, ptr, __gu_err)			\
-	asm volatile(							\
-		"1:	ld." suffix "	%1, %3			\n"	\
-		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
-		"3:	mov	%0, %4				\n"	\
-		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
-		"	.section __ex_table, \"a\"		\n"	\
-		"	.long	1b, 3b				\n"	\
-		"	.previous				\n"	\
-		: "=r"(__gu_err), "=r"(__gu_val)			\
-		: "0"(__gu_err), "m"(*(ptr)), "i"(-EFAULT))
-
-#define __put_user_nocheck(x, ptr, size)				\
-({									\
-	typeof(*(ptr)) __pu_val;					\
-	int __pu_err = 0;						\
-									\
-	__pu_val = (x);							\
-	switch (size) {							\
-	case 1: __put_user_asm("b", ptr, __pu_val, __pu_err); break;	\
-	case 2: __put_user_asm("h", ptr, __pu_val, __pu_err); break;	\
-	case 4: __put_user_asm("w", ptr, __pu_val, __pu_err); break;	\
-	case 8: __put_user_asm("d", ptr, __pu_val, __pu_err); break;	\
-	default: __pu_err = __put_user_bad(); break;			\
-	}								\
-	__pu_err;							\
-})
-
-#define __put_user_check(x, ptr, size)					\
-({									\
-	typeof(*(ptr)) __pu_val;					\
-	typeof(*(ptr)) __user *__pu_addr = (ptr);			\
-	int __pu_err = 0;						\
-									\
-	__pu_val = (x);							\
-	if (access_ok(VERIFY_WRITE, __pu_addr, size)) {			\
-		switch (size) {						\
-		case 1:							\
-			__put_user_asm("b", __pu_addr, __pu_val,	\
-				       __pu_err);			\
-			break;						\
-		case 2:							\
-			__put_user_asm("h", __pu_addr, __pu_val,	\
-				       __pu_err);			\
-			break;						\
-		case 4:							\
-			__put_user_asm("w", __pu_addr, __pu_val,	\
-				       __pu_err);			\
-			break;						\
-		case 8:							\
-			__put_user_asm("d", __pu_addr, __pu_val,		\
-				       __pu_err);			\
-			break;						\
-		default:						\
-			__pu_err = __put_user_bad();			\
-			break;						\
-		}							\
-	} else {							\
-		__pu_err = -EFAULT;					\
-	}								\
-	__pu_err;							\
-})
-
-#define __put_user_asm(suffix, ptr, __pu_val, __gu_err)			\
-	asm volatile(							\
-		"1:	st." suffix "	%1, %3			\n"	\
-		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
-		"3:	mov	%0, %4				\n"	\
-		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
-		"	.section __ex_table, \"a\"		\n"	\
-		"	.long	1b, 3b				\n"	\
-		"	.previous				\n"	\
-		: "=r"(__gu_err), "=m"(*(ptr))				\
-		: "0"(__gu_err), "r"(__pu_val), "i"(-EFAULT))
-
-extern __kernel_size_t clear_user(void __user *addr, __kernel_size_t size);
-extern __kernel_size_t __clear_user(void __user *addr, __kernel_size_t size);
-
-extern long strncpy_from_user(char *dst, const char __user *src, long count);
-extern long __strncpy_from_user(char *dst, const char __user *src, long count);
-
-extern long strnlen_user(const char __user *__s, long __n);
-extern long __strnlen_user(const char __user *__s, long __n);
-
-#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-#endif /* __ASM_AVR32_UACCESS_H */
diff --git a/include/asm-avr32/ucontext.h b/include/asm-avr32/ucontext.h
deleted file mode 100644
index ac7259c2a799..000000000000
--- a/include/asm-avr32/ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ASM_AVR32_UCONTEXT_H
-#define __ASM_AVR32_UCONTEXT_H
-
-struct ucontext {
-	unsigned long		uc_flags;
-	struct ucontext	*	uc_link;
-	stack_t			uc_stack;
-	struct sigcontext	uc_mcontext;
-	sigset_t		uc_sigmask;
-};
-
-#endif /* __ASM_AVR32_UCONTEXT_H */
diff --git a/include/asm-avr32/unaligned.h b/include/asm-avr32/unaligned.h
deleted file mode 100644
index 041877290470..000000000000
--- a/include/asm-avr32/unaligned.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_AVR32_UNALIGNED_H
-#define _ASM_AVR32_UNALIGNED_H
-
-/*
- * AVR32 can handle some unaligned accesses, depending on the
- * implementation.  The AVR32 AP implementation can handle unaligned
- * words, but halfwords must be halfword-aligned, and doublewords must
- * be word-aligned.
- *
- * However, swapped word loads must be word-aligned so we can't
- * optimize word loads in general.
- */
-
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif /* _ASM_AVR32_UNALIGNED_H */
diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
deleted file mode 100644
index 89861a27543e..000000000000
--- a/include/asm-avr32/unistd.h
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_UNISTD_H
-#define __ASM_AVR32_UNISTD_H
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_umask		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_lchown		 17
-#define __NR_lseek		 18
-#define __NR__llseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount2		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_pause		 28
-#define __NR_utime		 29
-#define __NR_stat		 30
-#define __NR_fstat		 31
-#define __NR_lstat		 32
-#define __NR_access		 33
-#define __NR_chroot		 34
-#define __NR_sync		 35
-#define __NR_fsync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_clone		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_getcwd		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_setfsuid		 52
-#define __NR_setfsgid		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_setpgid		 56
-#define __NR_mremap		 57
-#define __NR_setresuid		 58
-#define __NR_getresuid		 59
-#define __NR_setreuid		 60
-#define __NR_setregid		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_rt_sigaction	 67
-#define __NR_rt_sigreturn	 68
-#define __NR_rt_sigprocmask	 69
-#define __NR_rt_sigpending	 70
-#define __NR_rt_sigtimedwait	 71
-#define __NR_rt_sigqueueinfo	 72
-#define __NR_rt_sigsuspend	 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* SuS compliant getrlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_fchdir		 84
-#define __NR_readlink		 85
-#define __NR_pread		 86
-#define __NR_pwrite		 87
-#define __NR_swapon		 88
-#define __NR_reboot		 89
-#define __NR_mmap2		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_wait4		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_vhangup		101
-#define __NR_sigaltstack	102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_swapoff		106
-#define __NR_sysinfo		107
-/* 108 was __NR_ipc for a little while */
-#define __NR_sendfile		109
-#define __NR_setdomainname	110
-#define __NR_uname		111
-#define __NR_adjtimex		112
-#define __NR_mprotect		113
-#define __NR_vfork		114
-#define __NR_init_module	115
-#define __NR_delete_module	116
-#define __NR_quotactl		117
-#define __NR_getpgid		118
-#define __NR_bdflush		119
-#define __NR_sysfs		120
-#define __NR_personality	121
-#define __NR_afs_syscall	122 /* Syscall for Andrew File System */
-#define __NR_getdents		123
-#define __NR_flock		124
-#define __NR_msync		125
-#define __NR_readv		126
-#define __NR_writev		127
-#define __NR_getsid		128
-#define __NR_fdatasync		129
-#define __NR__sysctl		130
-#define __NR_mlock		131
-#define __NR_munlock		132
-#define __NR_mlockall		133
-#define __NR_munlockall		134
-#define __NR_sched_setparam		135
-#define __NR_sched_getparam		136
-#define __NR_sched_setscheduler		137
-#define __NR_sched_getscheduler		138
-#define __NR_sched_yield		139
-#define __NR_sched_get_priority_max	140
-#define __NR_sched_get_priority_min	141
-#define __NR_sched_rr_get_interval	142
-#define __NR_nanosleep		143
-#define __NR_poll		144
-#define __NR_nfsservctl		145
-#define __NR_setresgid		146
-#define __NR_getresgid		147
-#define __NR_prctl              148
-#define __NR_socket		149
-#define __NR_bind		150
-#define __NR_connect		151
-#define __NR_listen		152
-#define __NR_accept		153
-#define __NR_getsockname	154
-#define __NR_getpeername	155
-#define __NR_socketpair		156
-#define __NR_send		157
-#define __NR_recv		158
-#define __NR_sendto		159
-#define __NR_recvfrom		160
-#define __NR_shutdown		161
-#define __NR_setsockopt		162
-#define __NR_getsockopt		163
-#define __NR_sendmsg		164
-#define __NR_recvmsg		165
-#define __NR_truncate64		166
-#define __NR_ftruncate64	167
-#define __NR_stat64		168
-#define __NR_lstat64		169
-#define __NR_fstat64		170
-#define __NR_pivot_root		171
-#define __NR_mincore		172
-#define __NR_madvise		173
-#define __NR_getdents64		174
-#define __NR_fcntl64		175
-#define __NR_gettid		176
-#define __NR_readahead		177
-#define __NR_setxattr		178
-#define __NR_lsetxattr		179
-#define __NR_fsetxattr		180
-#define __NR_getxattr		181
-#define __NR_lgetxattr		182
-#define __NR_fgetxattr		183
-#define __NR_listxattr		184
-#define __NR_llistxattr		185
-#define __NR_flistxattr		186
-#define __NR_removexattr	187
-#define __NR_lremovexattr	188
-#define __NR_fremovexattr	189
-#define __NR_tkill		190
-#define __NR_sendfile64		191
-#define __NR_futex		192
-#define __NR_sched_setaffinity	193
-#define __NR_sched_getaffinity	194
-#define __NR_capget		195
-#define __NR_capset		196
-#define __NR_io_setup		197
-#define __NR_io_destroy		198
-#define __NR_io_getevents	199
-#define __NR_io_submit		200
-#define __NR_io_cancel		201
-#define __NR_fadvise64		202
-#define __NR_exit_group		203
-#define __NR_lookup_dcookie	204
-#define __NR_epoll_create	205
-#define __NR_epoll_ctl		206
-#define __NR_epoll_wait		207
-#define __NR_remap_file_pages	208
-#define __NR_set_tid_address	209
-
-#define __NR_timer_create	210
-#define __NR_timer_settime	211
-#define __NR_timer_gettime	212
-#define __NR_timer_getoverrun	213
-#define __NR_timer_delete	214
-#define __NR_clock_settime	215
-#define __NR_clock_gettime	216
-#define __NR_clock_getres	217
-#define __NR_clock_nanosleep	218
-#define __NR_statfs64		219
-#define __NR_fstatfs64		220
-#define __NR_tgkill		221
-				/* 222 reserved for tux */
-#define __NR_utimes		223
-#define __NR_fadvise64_64	224
-
-#define __NR_cacheflush		225
-
-#define __NR_vserver		226
-#define __NR_mq_open		227
-#define __NR_mq_unlink		228
-#define __NR_mq_timedsend	229
-#define __NR_mq_timedreceive	230
-#define __NR_mq_notify		231
-#define __NR_mq_getsetattr	232
-#define __NR_kexec_load		233
-#define __NR_waitid		234
-#define __NR_add_key		235
-#define __NR_request_key	236
-#define __NR_keyctl		237
-#define __NR_ioprio_set		238
-#define __NR_ioprio_get		239
-#define __NR_inotify_init	240
-#define __NR_inotify_add_watch	241
-#define __NR_inotify_rm_watch	242
-#define __NR_openat		243
-#define __NR_mkdirat		244
-#define __NR_mknodat		245
-#define __NR_fchownat		246
-#define __NR_futimesat		247
-#define __NR_fstatat64		248
-#define __NR_unlinkat		249
-#define __NR_renameat		250
-#define __NR_linkat		251
-#define __NR_symlinkat		252
-#define __NR_readlinkat		253
-#define __NR_fchmodat		254
-#define __NR_faccessat		255
-#define __NR_pselect6		256
-#define __NR_ppoll		257
-#define __NR_unshare		258
-#define __NR_set_robust_list	259
-#define __NR_get_robust_list	260
-#define __NR_splice		261
-#define __NR_sync_file_range	262
-#define __NR_tee		263
-#define __NR_vmsplice		264
-#define __NR_epoll_pwait	265
-
-#define __NR_msgget		266
-#define __NR_msgsnd		267
-#define __NR_msgrcv		268
-#define __NR_msgctl		269
-#define __NR_semget		270
-#define __NR_semop		271
-#define __NR_semctl		272
-#define __NR_semtimedop		273
-#define __NR_shmat		274
-#define __NR_shmget		275
-#define __NR_shmdt		276
-#define __NR_shmctl		277
-
-#define __NR_utimensat		278
-#define __NR_signalfd		279
-/* 280 was __NR_timerfd */
-#define __NR_eventfd		281
-
-#ifdef __KERNEL__
-#define NR_syscalls		282
-
-/* Old stuff */
-#define __IGNORE_uselib
-#define __IGNORE_mmap
-
-/* NUMA stuff */
-#define __IGNORE_mbind
-#define __IGNORE_get_mempolicy
-#define __IGNORE_set_mempolicy
-#define __IGNORE_migrate_pages
-#define __IGNORE_move_pages
-
-/* SMP stuff */
-#define __IGNORE_getcpu
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_AVR32_UNISTD_H */
diff --git a/include/asm-avr32/user.h b/include/asm-avr32/user.h
deleted file mode 100644
index 7e9152f81f5e..000000000000
--- a/include/asm-avr32/user.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note: We may not need these definitions for AVR32, as we don't
- * support a.out.
- */
-#ifndef __ASM_AVR32_USER_H
-#define __ASM_AVR32_USER_H
-
-#include <linux/types.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd).  The file contents are as follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *	what is present in the file.  Directly after this is a
- *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
- *	are stored as part of the upage.  The upage should always be
- *	only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *	current->brk to pick up all of the user variables, plus any memory
- *	that may have been sbrk'ed.  No attempt is made to determine if a
- *	page is demand-zero or if a page is totally unused, we just cover
- *	the entire range.  All of the addresses are rounded in such a way
- *	that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *	backtrace.  We need to write the data from usp to
- *	current->start_stack, so we round each of these in order to be able
- *	to write an integer number of pages.
- */
-
-struct user_fpu_struct {
-	/* We have no FPU (yet) */
-};
-
-struct user {
-	struct pt_regs	regs;			/* entire machine state */
-	size_t		u_tsize;		/* text size (pages) */
-	size_t		u_dsize;		/* data size (pages) */
-	size_t		u_ssize;		/* stack size (pages) */
-	unsigned long	start_code;		/* text starting address */
-	unsigned long	start_data;		/* data starting address */
-	unsigned long	start_stack;		/* stack starting address */
-	long int	signal;			/* signal causing core dump */
-	unsigned long	u_ar0;			/* help gdb find registers */
-	unsigned long	magic;			/* identifies a core file */
-	char		u_comm[32];		/* user command name */
-};
-
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
-#endif /* __ASM_AVR32_USER_H */
diff --git a/include/asm-avr32/xor.h b/include/asm-avr32/xor.h
deleted file mode 100644
index 99c87aa0af4f..000000000000
--- a/include/asm-avr32/xor.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_XOR_H
-#define _ASM_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 76033831eb35..320aa5e167e9 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -92,16 +92,20 @@ extern void *l1_data_B_sram_alloc(size_t);
 extern void *l1_inst_sram_alloc(size_t);
 extern void *l1_data_sram_alloc(size_t);
 extern void *l1_data_sram_zalloc(size_t);
+extern void *l2_sram_alloc(size_t);
+extern void *l2_sram_zalloc(size_t);
 extern int l1_data_A_sram_free(const void*);
 extern int l1_data_B_sram_free(const void*);
 extern int l1_inst_sram_free(const void*);
 extern int l1_data_sram_free(const void*);
+extern int l2_sram_free(const void *);
 extern int sram_free(const void*);
 
 #define L1_INST_SRAM		0x00000001
 #define L1_DATA_A_SRAM		0x00000002
 #define L1_DATA_B_SRAM		0x00000004
 #define L1_DATA_SRAM		0x00000006
+#define L2_SRAM			0x00000008
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
@@ -114,7 +118,9 @@ extern struct file_operations dpmc_fops;
 extern unsigned long _ramstart, _ramend, _rambase;
 extern unsigned long memory_start, memory_end, physical_mem_end;
 extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-    _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[];
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
 
 #ifdef CONFIG_MTD_UCLINUX
 extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h
index c0d5259e315b..3cd4b522aa3f 100644
--- a/include/asm-blackfin/dma.h
+++ b/include/asm-blackfin/dma.h
@@ -144,8 +144,16 @@ struct dma_channel {
 	void *data;
 	unsigned int dma_enable_flag;
 	unsigned int loopback_flag;
+#ifdef CONFIG_PM
+	unsigned short saved_peripheral_map;
+#endif
 };
 
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void);
+void blackfin_dma_resume(void);
+#endif
+
 /*******************************************************************************
 *	DMA API's
 *******************************************************************************/
diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
index 7f34cd384f12..de28e6e018b3 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/include/asm-blackfin/dpmc.h
@@ -7,63 +7,18 @@
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
-#define SLEEP_MODE		1
-#define DEEP_SLEEP_MODE		2
-#define ACTIVE_PLL_DISABLED	3
-#define FULLON_MODE		4
-#define ACTIVE_PLL_ENABLED	5
-#define HIBERNATE_MODE		6
-
-#define IOCTL_FULL_ON_MODE	_IO('s', 0xA0)
-#define IOCTL_ACTIVE_MODE	_IO('s', 0xA1)
-#define IOCTL_SLEEP_MODE	_IO('s', 0xA2)
-#define IOCTL_DEEP_SLEEP_MODE	_IO('s', 0xA3)
-#define IOCTL_HIBERNATE_MODE	_IO('s', 0xA4)
-#define IOCTL_CHANGE_FREQUENCY	_IOW('s', 0xA5, unsigned long)
-#define IOCTL_CHANGE_VOLTAGE	_IOW('s', 0xA6, unsigned long)
-#define IOCTL_SET_CCLK		_IOW('s', 0xA7, unsigned long)
-#define IOCTL_SET_SCLK		_IOW('s', 0xA8, unsigned long)
-#define IOCTL_GET_PLLSTATUS	_IOW('s', 0xA9, unsigned long)
-#define IOCTL_GET_CORECLOCK	_IOW('s', 0xAA, unsigned long)
-#define IOCTL_GET_SYSTEMCLOCK	_IOW('s', 0xAB, unsigned long)
-#define IOCTL_GET_VCO		_IOW('s', 0xAC, unsigned long)
-#define IOCTL_DISABLE_WDOG_TIMER _IO('s', 0xAD)
-#define IOCTL_UNMASK_WDOG_WAKEUP_EVENT _IO('s',0xAE)
-#define IOCTL_PROGRAM_WDOG_TIMER _IOW('s',0xAF,unsigned long)
-#define IOCTL_CLEAR_WDOG_WAKEUP_EVENT _IO('s',0xB0)
-#define IOCTL_SLEEP_DEEPER_MODE _IO('s',0xB1)
-
-#define DPMC_MINOR		254
-
-#define ON	0
-#define OFF	1
-
 #ifdef __KERNEL__
+#ifndef __ASSEMBLY__
 
-unsigned long calc_volt(void);
-int calc_vlev(int vlt);
-unsigned long change_voltage(unsigned long volt);
-int calc_msel(int vco_hz);
-unsigned long change_frequency(unsigned long vco_mhz);
-int set_pll_div(unsigned short sel, unsigned char flag);
-int get_vco(void);
-unsigned long change_system_clock(unsigned long clock);
-unsigned long change_core_clock(unsigned long clock);
-unsigned long get_pll_status(void);
-void change_baud(int baud);
-void fullon_mode(void);
-void active_mode(void);
 void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
 void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void program_wdog_timer(unsigned long);
-void unmask_wdog_wakeup_evt(void);
-void clear_wdog_wakeup_evt(void);
-void disable_wdog_timer(void);
+void do_hibernate(int wakeup);
+void set_dram_srfs(void);
+void unset_dram_srfs(void);
 
-extern unsigned long get_cclk(void);
-extern unsigned long get_sclk(void);
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
 
 struct bfin_dpmc_platform_data {
 	const unsigned int *tuple_tab;
@@ -71,8 +26,33 @@ struct bfin_dpmc_platform_data {
 	unsigned short vr_settling_time; /* in us */
 };
 
-#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+#else
+
+#define PM_PUSH(x) \
+	R0 = [P0 + (x - SRAM_BASE_ADDRESS)];\
+	[--SP] =  R0;\
+
+#define PM_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - SRAM_BASE_ADDRESS)] = R0;\
+
+#define PM_SYS_PUSH(x) \
+	R0 = [P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - PLL_CTL)] = R0;\
+
+#define PM_SYS_PUSH16(x) \
+	R0 = w[P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP16(x) \
+	R0 = [SP++];\
+	w[P0 + (x - PLL_CTL)] = R0;\
 
+#endif
 #endif	/* __KERNEL__ */
 
 #endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/elf.h b/include/asm-blackfin/elf.h
index 30303fc8292c..67a03a8a353e 100644
--- a/include/asm-blackfin/elf.h
+++ b/include/asm-blackfin/elf.h
@@ -15,6 +15,8 @@
 #define EF_BFIN_FDPIC		0x00000002	/* -mfdpic */
 #define EF_BFIN_CODE_IN_L1	0x00000010	/* --code-in-l1 */
 #define EF_BFIN_DATA_IN_L1	0x00000020	/* --data-in-l1 */
+#define EF_BFIN_CODE_IN_L2	0x00000040	/* --code-in-l2 */
+#define EF_BFIN_DATA_IN_L2	0x00000080	/* --data-in-l2 */
 
 typedef unsigned long elf_greg_t;
 
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index ff95e9d88342..168f1251eb4d 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -376,8 +376,12 @@ struct gpio_port_t {
 #endif
 
 #ifdef CONFIG_PM
-unsigned int bfin_pm_setup(void);
-void bfin_pm_restore(void);
+
+unsigned int bfin_pm_standby_setup(void);
+void bfin_pm_standby_restore(void);
+
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
 
 #ifndef CONFIG_BF54x
 #define PM_WAKE_RISING	0x1
@@ -392,17 +396,8 @@ void gpio_pm_wakeup_free(unsigned gpio);
 
 struct gpio_port_s {
 	unsigned short data;
-	unsigned short data_clear;
-	unsigned short data_set;
-	unsigned short toggle;
 	unsigned short maska;
-	unsigned short maska_clear;
-	unsigned short maska_set;
-	unsigned short maska_toggle;
 	unsigned short maskb;
-	unsigned short maskb_clear;
-	unsigned short maskb_set;
-	unsigned short maskb_toggle;
 	unsigned short dir;
 	unsigned short polar;
 	unsigned short edge;
@@ -411,10 +406,10 @@ struct gpio_port_s {
 
 	unsigned short fer;
 	unsigned short reserved;
+	unsigned short mux;
 };
 #endif /*CONFIG_BF54x*/
 #endif /*CONFIG_PM*/
-
 /***********************************************************
 *
 * FUNCTIONS: Blackfin GPIO Driver
diff --git a/include/asm-blackfin/ide.h b/include/asm-blackfin/ide.h
deleted file mode 100644
index 5b88de115bf4..000000000000
--- a/include/asm-blackfin/ide.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/****************************************************************************/
-
-/*
- *  linux/include/asm-blackfin/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- *  Copyright (C) 2001       Lineo Inc., davidm@snapgear.com
- *  Copyright (C) 2002       Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 2002       Yoshinori Sato (ysato@users.sourceforge.jp)
- *  Copyright (C) 2005       Hennerich Michael (hennerich@blackfin.uclinux.org)
- */
-
-/****************************************************************************/
-#ifndef _BLACKFIN_IDE_H
-#define _BLACKFIN_IDE_H
-/****************************************************************************/
-#ifdef __KERNEL__
-/****************************************************************************/
-
-#define MAX_HWIFS	1
-
-#include <asm-generic/ide_iops.h>
-
-/****************************************************************************/
-#endif				/* __KERNEL__ */
-#endif				/* _BLACKFIN_IDE_H */
-/****************************************************************************/
diff --git a/include/asm-blackfin/kvm.h b/include/asm-blackfin/kvm.h
deleted file mode 100644
index e3477d77c014..000000000000
--- a/include/asm-blackfin/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_BLACKFIN_H
-#define __LINUX_KVM_BLACKFIN_H
-
-/* blackfin does not support KVM */
-
-#endif
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 4725268a5ada..b7b166f4f064 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -23,6 +23,8 @@
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
+/* New Feature: EMAC TX DMA Word Alignment */
+#define ANOMALY_05000285 (1)
 /* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/include/asm-blackfin/mach-bf527/bfin_sir.h
index 0612d0c9501c..cfd8ad4f1f2c 100644
--- a/include/asm-blackfin/mach-bf527/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf527/bfin_sir.h
@@ -118,16 +118,25 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf527/defBF527.h b/include/asm-blackfin/mach-bf527/defBF527.h
index 82134f578f32..f1a70db70cb8 100644
--- a/include/asm-blackfin/mach-bf527/defBF527.h
+++ b/include/asm-blackfin/mach-bf527/defBF527.h
@@ -302,6 +302,7 @@
 #define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
 #define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
 #define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
+#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
 #define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
 
 #define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
diff --git a/include/asm-blackfin/mach-bf527/mem_init.h b/include/asm-blackfin/mach-bf527/mem_init.h
index 008ca66719e2..cbe03f4a5698 100644
--- a/include/asm-blackfin/mach-bf527/mem_init.h
+++ b/include/asm-blackfin/mach-bf527/mem_init.h
@@ -146,33 +146,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/include/asm-blackfin/mach-bf533/bfin_sir.h
index cefcf8bb505b..9bb87e9e2e9b 100644
--- a/include/asm-blackfin/mach-bf533/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf533/bfin_sir.h
@@ -110,11 +110,16 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h
index f8f31901fca9..995c06b2b1ef 100644
--- a/include/asm-blackfin/mach-bf533/mem_init.h
+++ b/include/asm-blackfin/mach-bf533/mem_init.h
@@ -133,33 +133,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref)  / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/include/asm-blackfin/mach-bf537/bfin_sir.h
index 0612d0c9501c..cfd8ad4f1f2c 100644
--- a/include/asm-blackfin/mach-bf537/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf537/bfin_sir.h
@@ -118,16 +118,25 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/include/asm-blackfin/mach-bf537/defBF537.h
index 3f455909c418..abde24c6d3b1 100644
--- a/include/asm-blackfin/mach-bf537/defBF537.h
+++ b/include/asm-blackfin/mach-bf537/defBF537.h
@@ -290,6 +290,7 @@
 #define	PHYIE		0x00000001	/* PHY_INT Interrupt Enable                                                     */
 #define	RXDWA		0x00000002	/* Receive Frame DMA Word Alignment (Odd/Even*)         */
 #define	RXCKS		0x00000004	/* Enable RX Frame TCP/UDP Checksum Computation         */
+#define	TXDWA		0x00000010	/* Transmit Frame DMA Word Alignment (Odd/Even*)        */
 #define	MDCDIV		0x00003F00	/* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]          */
 
 #define	SET_MDCDIV(x)	(((x)&0x3F)<< 8)	/* Set MDC Clock Divisor                                */
diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/include/asm-blackfin/mach-bf537/mem_init.h
index 9ad979d416c6..f67698f670ca 100644
--- a/include/asm-blackfin/mach-bf537/mem_init.h
+++ b/include/asm-blackfin/mach-bf537/mem_init.h
@@ -139,33 +139,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EBSZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EBSZ_64
-#endif
-#if (CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EBSZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EBSZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EBCAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EBCAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EBCAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EBCAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EBE)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/include/asm-blackfin/mach-bf548/bfin_sir.h
index 5e94271c7e3b..c41f9cf00268 100644
--- a/include/asm-blackfin/mach-bf548/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf548/bfin_sir.h
@@ -124,26 +124,43 @@ struct bfin_sir_self {
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR1
-	peripheral_request(P_UART1_TX, DRIVER_NAME);
-	peripheral_request(P_UART1_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR2
-	peripheral_request(P_UART2_TX, DRIVER_NAME);
-	peripheral_request(P_UART2_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART2_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART2_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
 
 #ifdef CONFIG_BFIN_SIR3
-	peripheral_request(P_UART3_TX, DRIVER_NAME);
-	peripheral_request(P_UART3_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART3_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART3_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
index cb8b0f15c9a6..bba82dc75f16 100644
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -209,3 +209,11 @@ struct gpio_port_t {
 	unsigned short dummy7;
 	unsigned int port_mux;
 };
+
+struct gpio_port_s {
+	unsigned short fer;
+	unsigned short data;
+	unsigned short dir;
+	unsigned short inen;
+	unsigned int mux;
+};
diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/include/asm-blackfin/mach-bf561/bfin_sir.h
index cefcf8bb505b..9bb87e9e2e9b 100644
--- a/include/asm-blackfin/mach-bf561/bfin_sir.h
+++ b/include/asm-blackfin/mach-bf561/bfin_sir.h
@@ -110,11 +110,16 @@ static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
 
 #define DRIVER_NAME "bfin_sir"
 
-static void bfin_sir_hw_init(void)
+static int bfin_sir_hw_init(void)
 {
+	int ret = -ENODEV;
 #ifdef CONFIG_BFIN_SIR0
-	peripheral_request(P_UART0_TX, DRIVER_NAME);
-	peripheral_request(P_UART0_RX, DRIVER_NAME);
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
 #endif
-	SSYNC();
+	return ret;
 }
diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/include/asm-blackfin/mach-bf561/mem_init.h
index 439a5895b346..e163260bca18 100644
--- a/include/asm-blackfin/mach-bf561/mem_init.h
+++ b/include/asm-blackfin/mach-bf561/mem_init.h
@@ -131,33 +131,6 @@
 #define SDRAM_CL    CL_3
 #endif
 
-#if (CONFIG_MEM_SIZE == 128)
-#define SDRAM_SIZE      EB0_SZ_128
-#endif
-#if (CONFIG_MEM_SIZE == 64)
-#define SDRAM_SIZE      EB0_SZ_64
-#endif
-#if ( CONFIG_MEM_SIZE == 32)
-#define SDRAM_SIZE      EB0_SZ_32
-#endif
-#if (CONFIG_MEM_SIZE == 16)
-#define SDRAM_SIZE      EB0_SZ_16
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 11)
-#define SDRAM_WIDTH     EB0_CAW_11
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 10)
-#define SDRAM_WIDTH     EB0_CAW_10
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 9)
-#define SDRAM_WIDTH     EB0_CAW_9
-#endif
-#if (CONFIG_MEM_ADD_WIDTH == 8)
-#define SDRAM_WIDTH     EB0_CAW_8
-#endif
-
-#define mem_SDBCTL      (SDRAM_WIDTH | SDRAM_SIZE | EB0_E)
-
 /* Equation from section 17 (p17-46) of BF533 HRM */
 #define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
 
diff --git a/include/asm-blackfin/module.h b/include/asm-blackfin/module.h
index 3c7ce1644280..e3128df139d6 100644
--- a/include/asm-blackfin/module.h
+++ b/include/asm-blackfin/module.h
@@ -6,8 +6,6 @@
 #define Elf_Shdr        Elf32_Shdr
 #define Elf_Sym         Elf32_Sym
 #define Elf_Ehdr        Elf32_Ehdr
-#define FLG_CODE_IN_L1	0x10
-#define FLG_DATA_IN_L1	0x20
 
 struct mod_arch_specific {
 	Elf_Shdr	*text_l1;
@@ -15,5 +13,8 @@ struct mod_arch_specific {
 	Elf_Shdr	*bss_a_l1;
 	Elf_Shdr	*data_b_l1;
 	Elf_Shdr	*bss_b_l1;
+	Elf_Shdr	*text_l2;
+	Elf_Shdr	*data_l2;
+	Elf_Shdr	*bss_l2;
 };
 #endif				/* _ASM_BFIN_MODULE_H */
diff --git a/include/asm-blackfin/namei.h b/include/asm-blackfin/namei.h
deleted file mode 100644
index 8b89a2d65cb4..000000000000
--- a/include/asm-blackfin/namei.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm/namei.h
- *
- * Included from linux/fs/namei.c
- *
- * Changes made by Lineo Inc.    May 2001
- */
-
-#ifndef __BFIN_NAMEI_H
-#define __BFIN_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h
index c7db0220fbd6..344f6a8c1f22 100644
--- a/include/asm-blackfin/page.h
+++ b/include/asm-blackfin/page.h
@@ -51,9 +51,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h
index 1c0040724612..6f3995b119d8 100644
--- a/include/asm-blackfin/processor.h
+++ b/include/asm-blackfin/processor.h
@@ -112,7 +112,26 @@ unsigned long get_wchan(struct task_struct *p);
 static inline uint32_t __pure bfin_revid(void)
 {
 	/* stored in the upper 4 bits */
-	return bfin_read_CHIPID() >> 28;
+	uint32_t revid = bfin_read_CHIPID() >> 28;
+
+#ifdef CONFIG_BF52x
+	/* ANOMALY_05000357
+	 * Incorrect Revision Number in DSPID Register
+	 */
+	if (revid == 0)
+		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
+		case 0x0010:
+			revid = 0;
+			break;
+		case 0x2796:
+			revid = 1;
+			break;
+		default:
+			revid = 0xFFFF;
+			break;
+		}
+#endif
+	return revid;
 }
 
 static inline uint32_t __pure bfin_compiled_revid(void)
diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
index b8346cd3a6f6..a45a80e54adc 100644
--- a/include/asm-blackfin/ptrace.h
+++ b/include/asm-blackfin/ptrace.h
@@ -83,14 +83,14 @@ struct pt_regs {
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13	/* ptrace signal  */
 
-#ifdef CONFIG_BINFMT_ELF_FDPIC
 #define PTRACE_GETFDPIC           31
 #define PTRACE_GETFDPIC_EXEC      0
 #define PTRACE_GETFDPIC_INTERP    1
-#endif
 
 #define PS_S  (0x0002)
 
+#ifdef __KERNEL__
+
 /* user_mode returns true if only one bit is set in IPEND, other than the
    master interrupt enable.  */
 #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
@@ -98,6 +98,8 @@ struct pt_regs {
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
+#endif  /*  __KERNEL__  */
+
 #endif				/* __ASSEMBLY__ */
 
 /*
diff --git a/include/asm-blackfin/semaphore.h b/include/asm-blackfin/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-blackfin/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h
index bc2fe5accf20..642769329d12 100644
--- a/include/asm-blackfin/thread_info.h
+++ b/include/asm-blackfin/thread_info.h
@@ -42,6 +42,7 @@
 /*
  * Size of kernel stack for each process. This must be a power of 2...
  */
+#define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		8192	/* 2 pages */
 
 #ifndef __ASSEMBLY__
@@ -94,10 +95,6 @@ static inline struct thread_info *current_thread_info(void)
 	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
 #endif				/* __ASSEMBLY__ */
 
 /*
diff --git a/include/asm-cris/Kbuild b/include/asm-cris/Kbuild
index 17455459c43f..b7037d80d461 100644
--- a/include/asm-cris/Kbuild
+++ b/include/asm-cris/Kbuild
@@ -1,7 +1,8 @@
 include include/asm-generic/Kbuild.asm
 
-header-$(CONFIG_ETRAX_ARCH_V10) += arch-v10/
-header-$(CONFIG_ETRAX_ARCH_V32) += arch-v32/
+header-y += arch/
+header-y += arch-v10/
+header-y += arch-v32/
 
 header-y += ethernet.h
 header-y += rtc.h
diff --git a/include/asm-cris/arch-v10/Kbuild b/include/asm-cris/arch-v10/Kbuild
index 60e7e1b73cec..7a192e1290b1 100644
--- a/include/asm-cris/arch-v10/Kbuild
+++ b/include/asm-cris/arch-v10/Kbuild
@@ -1,4 +1,3 @@
-header-y += ptrace.h
 header-y += user.h
 header-y += svinto.h
 header-y += sv_addr_ag.h
diff --git a/include/asm-cris/arch-v10/ide.h b/include/asm-cris/arch-v10/ide.h
deleted file mode 100644
index 5366e6239328..000000000000
--- a/include/asm-cris/arch-v10/ide.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/include/asm-cris/ide.h
- *
- *  Copyright (C) 2000, 2001, 2002  Axis Communications AB
- *
- *  Authors:    Bjorn Wesen
- *
- */
-
-/*
- *  This file contains the ETRAX 100LX specific IDE code.
- */
-
-#ifndef __ASMCRIS_IDE_H
-#define __ASMCRIS_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/arch/svinto.h>
-#include <asm/io.h>
-#include <asm-generic/ide_iops.h>
-
-
-/* ETRAX 100 can support 4 IDE busses on the same pins (serialized) */
-
-#define MAX_HWIFS	4
-
-static inline int ide_default_irq(unsigned long base)
-{
-	/* all IDE busses share the same IRQ, number 4.
-	 * this has the side-effect that ide-probe.c will cluster our 4 interfaces
-	 * together in a hwgroup, and will serialize accesses. this is good, because
-	 * we can't access more than one interface at the same time on ETRAX100.
-	 */
-	return 4;
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	/* we have no real I/O base address per interface, since all go through the
-	 * same register. but in a bitfield in that register, we have the i/f number.
-	 * so we can use the io_base to remember that bitfield.
-	 */
-	static const unsigned long io_bases[MAX_HWIFS] = {
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 0),
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 1),
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 2),
-		IO_FIELD(R_ATA_CTRL_DATA, sel, 3)
-	};
-	return io_bases[index];
-}
-
-/* this is called once for each interface, to setup the port addresses. data_port is the result
- * of the ide_default_io_base call above. ctrl_port will be 0, but that is don't care for us.
- */
-
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq)
-{
-	int i;
-
-	/* fill in ports for ATA addresses 0 to 7 */
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = data_port |
-			IO_FIELD(R_ATA_CTRL_DATA, addr, i) |
-			IO_STATE(R_ATA_CTRL_DATA, cs0, active);
-	}
-
-	/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
-	hw->io_ports.ctl_addr = data_port |
-			IO_FIELD(R_ATA_CTRL_DATA, addr, 6) |
-			IO_STATE(R_ATA_CTRL_DATA, cs1, active);
-
-	/* whats this for ? */
-	hw->io_ports.irq_addr = 0;
-}
-
-static inline void ide_init_default_hwifs(void)
-{
-	hw_regs_t hw;
-	int index;
-
-	for(index = 0; index < MAX_HWIFS; index++) {
-		ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
-		hw.irq = ide_default_irq(ide_default_io_base(index));
-		ide_register_hw(&hw, NULL);
-	}
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMCRIS_IDE_H */
diff --git a/include/asm-cris/arch-v10/ptrace.h b/include/asm-cris/arch-v10/ptrace.h
index fb14c5ee37f9..2f464eab3a51 100644
--- a/include/asm-cris/arch-v10/ptrace.h
+++ b/include/asm-cris/arch-v10/ptrace.h
@@ -106,10 +106,14 @@ struct switch_stack {
 	unsigned long return_ip; /* ip that _resume will return to */
 };
 
+#ifdef __KERNEL__
+
 /* bit 8 is user-mode flag */
 #define user_mode(regs) (((regs)->dccr & 0x100) != 0)
 #define instruction_pointer(regs) ((regs)->irp)
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
+#endif  /*  __KERNEL__  */
+
 #endif
diff --git a/include/asm-cris/arch-v32/Kbuild b/include/asm-cris/arch-v32/Kbuild
index a0ec545e242e..35f2fc4f993e 100644
--- a/include/asm-cris/arch-v32/Kbuild
+++ b/include/asm-cris/arch-v32/Kbuild
@@ -1,3 +1,2 @@
-header-y += ptrace.h
 header-y += user.h
 header-y += cryptocop.h
diff --git a/include/asm-cris/arch-v32/ide.h b/include/asm-cris/arch-v32/ide.h
deleted file mode 100644
index fb9c3627a5b4..000000000000
--- a/include/asm-cris/arch-v32/ide.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-cris/ide.h
- *
- *  Copyright (C) 2000-2004  Axis Communications AB
- *
- *  Authors:    Bjorn Wesen, Mikael Starvik
- *
- */
-
-/*
- *  This file contains the ETRAX FS specific IDE code.
- */
-
-#ifndef __ASMCRIS_IDE_H
-#define __ASMCRIS_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/arch/hwregs/intr_vect.h>
-#include <asm/arch/hwregs/ata_defs.h>
-#include <asm/io.h>
-#include <asm-generic/ide_iops.h>
-
-
-/* ETRAX FS can support 4 IDE busses on the same pins (serialized) */
-
-#define MAX_HWIFS	4
-
-static inline int ide_default_irq(unsigned long base)
-{
-	/* all IDE busses share the same IRQ,
-	 * this has the side-effect that ide-probe.c will cluster our 4 interfaces
-	 * together in a hwgroup, and will serialize accesses. this is good, because
-	 * we can't access more than one interface at the same time on ETRAX100.
-	 */
-	return ATA_INTR_VECT;
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	reg_ata_rw_ctrl2 ctrl2 = {.sel = index};
-	/* we have no real I/O base address per interface, since all go through the
-	 * same register. but in a bitfield in that register, we have the i/f number.
-	 * so we can use the io_base to remember that bitfield.
-	 */
-        ctrl2.sel = index;
-
-	return REG_TYPE_CONV(unsigned long, reg_ata_rw_ctrl2, ctrl2);
-}
-
-#define IDE_ARCH_ACK_INTR
-#define ide_ack_intr(hwif)	((hwif)->ack_intr(hwif))
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMCRIS_IDE_H */
diff --git a/include/asm-cris/arch-v32/ptrace.h b/include/asm-cris/arch-v32/ptrace.h
index 516cc7062d94..41f4e8662bc2 100644
--- a/include/asm-cris/arch-v32/ptrace.h
+++ b/include/asm-cris/arch-v32/ptrace.h
@@ -106,9 +106,13 @@ struct switch_stack {
 	unsigned long return_ip; /* ip that _resume will return to */
 };
 
+#ifdef __KERNEL__
+
 #define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0)
 #define instruction_pointer(regs) ((regs)->erp)
 extern void show_regs(struct pt_regs *);
 #define profile_pc(regs) instruction_pointer(regs)
 
+#endif  /*  __KERNEL__  */
+
 #endif
diff --git a/include/asm-cris/cacheflush.h b/include/asm-cris/cacheflush.h
index 01af2de27c5b..cf60e3f69f8d 100644
--- a/include/asm-cris/cacheflush.h
+++ b/include/asm-cris/cacheflush.h
@@ -26,7 +26,6 @@
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	memcpy(dst, src, len)
 
-void global_flush_tlb(void); 
 int change_page_attr(struct page *page, int numpages, pgprot_t prot);
 
 #endif /* _CRIS_CACHEFLUSH_H */
diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h
index edc8d1bfaae2..da8ef8e8f842 100644
--- a/include/asm-cris/dma-mapping.h
+++ b/include/asm-cris/dma-mapping.h
@@ -14,6 +14,8 @@
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
 #ifdef CONFIG_PCI
+#include <asm-generic/dma-coherent.h>
+
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t flag);
 
@@ -120,7 +122,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 }
 
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-cris/ide.h b/include/asm-cris/ide.h
deleted file mode 100644
index a894f66665f8..000000000000
--- a/include/asm-cris/ide.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/arch/ide.h>
diff --git a/include/asm-cris/kvm.h b/include/asm-cris/kvm.h
deleted file mode 100644
index c860f51149f0..000000000000
--- a/include/asm-cris/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_CRIS_H
-#define __LINUX_KVM_CRIS_H
-
-/* cris does not support KVM */
-
-#endif
diff --git a/include/asm-cris/namei.h b/include/asm-cris/namei.h
deleted file mode 100644
index 8a3be7a6d9f6..000000000000
--- a/include/asm-cris/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 2000/07/10 16:32:31 bjornw Exp $
- * linux/include/asm-cris/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __CRIS_NAMEI_H
-#define __CRIS_NAMEI_H
-
-/* used to find file-system prefixes for doing emulations
- * see for example asm-sparc/namei.h
- * we don't use it...
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __CRIS_NAMEI_H */
diff --git a/include/asm-cris/page.h b/include/asm-cris/page.h
index c45bb1ef397c..d19272ba6b69 100644
--- a/include/asm-cris/page.h
+++ b/include/asm-cris/page.h
@@ -60,9 +60,6 @@ typedef struct page *pgtable_t;
 
 #define page_to_phys(page)     __pa((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #ifndef __ASSEMBLY__
 
 #endif /* __ASSEMBLY__ */
diff --git a/include/asm-cris/ptrace.h b/include/asm-cris/ptrace.h
index 1ec69a7ea836..d910925e3174 100644
--- a/include/asm-cris/ptrace.h
+++ b/include/asm-cris/ptrace.h
@@ -4,11 +4,13 @@
 #include <asm/arch/ptrace.h>
 
 #ifdef __KERNEL__
+
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13
-#endif
 
 #define profile_pc(regs) instruction_pointer(regs)
 
+#endif /* __KERNEL__ */
+
 #endif /* _CRIS_PTRACE_H */
diff --git a/include/asm-cris/semaphore.h b/include/asm-cris/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-cris/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h
index 784668ab0fa2..7efe1000f99d 100644
--- a/include/asm-cris/thread_info.h
+++ b/include/asm-cris/thread_info.h
@@ -11,6 +11,8 @@
 
 #ifdef __KERNEL__
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 #include <asm/processor.h>
diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild
index bc3f12c5b7e0..0f8956def738 100644
--- a/include/asm-frv/Kbuild
+++ b/include/asm-frv/Kbuild
@@ -3,4 +3,3 @@ include include/asm-generic/Kbuild.asm
 header-y += registers.h
 
 unifdef-y += termios.h
-unifdef-y += ptrace.h
diff --git a/include/asm-frv/dma-mapping.h b/include/asm-frv/dma-mapping.h
index 2e8966ca030d..b2898877c07b 100644
--- a/include/asm-frv/dma-mapping.h
+++ b/include/asm-frv/dma-mapping.h
@@ -126,7 +126,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 }
 
 static inline
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-frv/ide.h b/include/asm-frv/ide.h
index 8c9a540d4344..7ebcc56a2229 100644
--- a/include/asm-frv/ide.h
+++ b/include/asm-frv/ide.h
@@ -18,10 +18,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 8
-#endif
-
 /****************************************************************************/
 /*
  * some bits needed for parts of the IDE subsystem to compile
diff --git a/include/asm-frv/ioctls.h b/include/asm-frv/ioctls.h
index 341c7ddef2a3..d0c30e31fbda 100644
--- a/include/asm-frv/ioctls.h
+++ b/include/asm-frv/ioctls.h
@@ -47,6 +47,10 @@
 #define TIOCSBRK	0x5427  /* BSD compatibility */
 #define TIOCCBRK	0x5428  /* BSD compatibility */
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
diff --git a/include/asm-frv/kvm.h b/include/asm-frv/kvm.h
deleted file mode 100644
index 9c8a4f08d0a9..000000000000
--- a/include/asm-frv/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_FRV_H
-#define __LINUX_KVM_FRV_H
-
-/* frv does not support KVM */
-
-#endif
diff --git a/include/asm-frv/namei.h b/include/asm-frv/namei.h
deleted file mode 100644
index 4ea57171d951..000000000000
--- a/include/asm-frv/namei.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-frv/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASM_NAMEI_H
-#define __ASM_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
-
diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h
index c2c1e89e747d..bd9c220094c7 100644
--- a/include/asm-frv/page.h
+++ b/include/asm-frv/page.h
@@ -40,9 +40,6 @@ typedef struct page *pgtable_t;
 #define __pgprot(x)	((pgprot_t) { (x) } )
 #define PTE_MASK	PAGE_MASK
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 #define devmem_is_allowed(pfn)	1
 
 #define __pa(vaddr)		virt_to_phys((void *) (unsigned long) (vaddr))
diff --git a/include/asm-frv/semaphore.h b/include/asm-frv/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-frv/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-frv/termbits.h b/include/asm-frv/termbits.h
index 74851b424d4f..5568492b5086 100644
--- a/include/asm-frv/termbits.h
+++ b/include/asm-frv/termbits.h
@@ -141,6 +141,7 @@ struct ktermios {
 #define HUPCL	0002000
 #define CLOCAL	0004000
 #define CBAUDEX 0010000
+#define    BOTHER 0010000
 #define    B57600 0010001
 #define   B115200 0010002
 #define   B230400 0010003
@@ -156,11 +157,13 @@ struct ktermios {
 #define  B3000000 0010015
 #define  B3500000 0010016
 #define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CIBAUD	  002003600000		/* Input baud rate */
 #define CTVB	  004000000000		/* VisioBraille Terminal flow control */
 #define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
+#define IBSHIFT	16			/* Shift from CBAUD to CIBAUD */
+
 /* c_lflag bits */
 #define ISIG	0000001
 #define ICANON	0000002
diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h
index 348b8f1df17e..b7ac6bf2844c 100644
--- a/include/asm-frv/thread_info.h
+++ b/include/asm-frv/thread_info.h
@@ -82,6 +82,8 @@ register struct thread_info *__current_thread_info asm("gr15");
 
 #define current_thread_info() ({ __current_thread_info; })
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h
index f184eb8c047c..edcfaf5f0414 100644
--- a/include/asm-frv/unistd.h
+++ b/include/asm-frv/unistd.h
@@ -333,10 +333,16 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 325
+#define NR_syscalls 333
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 7cd25b8e7c9a..1170dc60e638 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,4 +1,6 @@
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 header-y  += kvm.h
+endif
 
 ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
 unifdef-y += a.out.h
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 2632328d8646..a3f738cffdb6 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -34,9 +34,14 @@ struct bug_entry {
 #ifndef __WARN
 #ifndef __ASSEMBLY__
 extern void warn_on_slowpath(const char *file, const int line);
+extern void warn_slowpath(const char *file, const int line,
+		const char *fmt, ...) __attribute__((format(printf, 3, 4)));
 #define WANT_WARN_ON_SLOWPATH
 #endif
 #define __WARN() warn_on_slowpath(__FILE__, __LINE__)
+#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg)
+#else
+#define __WARN_printf(arg...) __WARN()
 #endif
 
 #ifndef WARN_ON
@@ -48,6 +53,15 @@ extern void warn_on_slowpath(const char *file, const int line);
 })
 #endif
 
+#ifndef WARN
+#define WARN(condition, format...) ({						\
+	int __ret_warn_on = !!(condition);				\
+	if (unlikely(__ret_warn_on))					\
+		__WARN_printf(format);					\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
 #else /* !CONFIG_BUG */
 #ifndef HAVE_ARCH_BUG
 #define BUG()
@@ -63,6 +77,14 @@ extern void warn_on_slowpath(const char *file, const int line);
 	unlikely(__ret_warn_on);					\
 })
 #endif
+
+#ifndef WARN
+#define WARN(condition, format...) ({					\
+	int __ret_warn_on = !!(condition);				\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
 #endif
 
 #define WARN_ON_ONCE(condition)	({				\
@@ -75,6 +97,9 @@ extern void warn_on_slowpath(const char *file, const int line);
 	unlikely(__ret_warn_once);				\
 })
 
+#define WARN_ON_RATELIMIT(condition, state)			\
+		WARN_ON((condition) && __ratelimit(state))
+
 #ifdef CONFIG_SMP
 # define WARN_ON_SMP(x)			WARN_ON(x)
 #else
diff --git a/include/asm-generic/dma-coherent.h b/include/asm-generic/dma-coherent.h
new file mode 100644
index 000000000000..85a3ffaa0242
--- /dev/null
+++ b/include/asm-generic/dma-coherent.h
@@ -0,0 +1,32 @@
+#ifndef DMA_COHERENT_H
+#define DMA_COHERENT_H
+
+#ifdef CONFIG_HAVE_GENERIC_DMA_COHERENT
+/*
+ * These two functions are only for dma allocator.
+ * Don't use them in device drivers.
+ */
+int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+				       dma_addr_t *dma_handle, void **ret);
+int dma_release_from_coherent(struct device *dev, int order, void *vaddr);
+
+/*
+ * Standard interface
+ */
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size);
+#else
+#define dma_alloc_from_coherent(dev, size, handle, ret) (0)
+#define dma_release_from_coherent(dev, order, vaddr) (0)
+#endif
+
+#endif
diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h
index e2468f894d2a..82cd0cb1c3fe 100644
--- a/include/asm-generic/dma-mapping-broken.h
+++ b/include/asm-generic/dma-mapping-broken.h
@@ -61,7 +61,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 #define dma_sync_sg_for_device dma_sync_sg_for_cpu
 
 extern int
-dma_mapping_error(dma_addr_t dma_addr);
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
 
 extern int
 dma_supported(struct device *dev, u64 mask);
diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h
index 783ab9944d70..189486c3f92e 100644
--- a/include/asm-generic/dma-mapping.h
+++ b/include/asm-generic/dma-mapping.h
@@ -144,9 +144,9 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 }
 
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return pci_dma_mapping_error(dma_addr);
+	return pci_dma_mapping_error(to_pci_dev(dev), dma_addr);
 }
 
 
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 6be061d09da9..0f99ad38b012 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -2,8 +2,9 @@
 #define _ASM_GENERIC_GPIO_H
 
 #include <linux/types.h>
+#include <linux/errno.h>
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 
 #include <linux/compiler.h>
 
@@ -13,7 +14,7 @@
  *
  * While the GPIO programming interface defines valid GPIO numbers
  * to be in the range 0..MAX_INT, this library restricts them to the
- * smaller range 0..ARCH_NR_GPIOS.
+ * smaller range 0..ARCH_NR_GPIOS-1.
  */
 
 #ifndef ARCH_NR_GPIOS
@@ -32,6 +33,8 @@ struct module;
 /**
  * struct gpio_chip - abstract a GPIO controller
  * @label: for diagnostics
+ * @dev: optional device providing the GPIOs
+ * @owner: helps prevent removal of modules exporting active GPIOs
  * @direction_input: configures signal "offset" as input, or returns error
  * @get: returns value for signal "offset"; for output signals this
  *	returns either the value actually sensed, or zero
@@ -59,6 +62,7 @@ struct module;
  */
 struct gpio_chip {
 	char			*label;
+	struct device		*dev;
 	struct module		*owner;
 
 	int			(*direction_input)(struct gpio_chip *chip,
@@ -74,6 +78,7 @@ struct gpio_chip {
 	int			base;
 	u16			ngpio;
 	unsigned		can_sleep:1;
+	unsigned		exported:1;
 };
 
 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
@@ -108,7 +113,18 @@ extern void __gpio_set_value(unsigned gpio, int value);
 extern int __gpio_cansleep(unsigned gpio);
 
 
-#else
+#ifdef CONFIG_GPIO_SYSFS
+
+/*
+ * A sysfs interface can be exported by individual drivers if they want,
+ * but more typically is configured entirely from userspace.
+ */
+extern int gpio_export(unsigned gpio, bool direction_may_change);
+extern void gpio_unexport(unsigned gpio);
+
+#endif	/* CONFIG_GPIO_SYSFS */
+
+#else	/* !CONFIG_HAVE_GPIO_LIB */
 
 static inline int gpio_is_valid(int number)
 {
@@ -137,6 +153,20 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	gpio_set_value(gpio, value);
 }
 
-#endif
+#endif /* !CONFIG_HAVE_GPIO_LIB */
+
+#ifndef CONFIG_GPIO_SYSFS
+
+/* sysfs support is only available with gpiolib, where it's optional */
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+#endif	/* CONFIG_GPIO_SYSFS */
 
 #endif /* _ASM_GENERIC_GPIO_H */
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
index 260948905e4e..f9bc9ac29b36 100644
--- a/include/asm-generic/int-ll64.h
+++ b/include/asm-generic/int-ll64.h
@@ -26,7 +26,7 @@ typedef unsigned int __u32;
 #ifdef __GNUC__
 __extension__ typedef __signed__ long long __s64;
 __extension__ typedef unsigned long long __u64;
-#elif defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+#else
 typedef __signed__ long long __s64;
 typedef unsigned long long __u64;
 #endif
diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h
index 25c10e96b2b7..37b3706226e7 100644
--- a/include/asm-generic/pci-dma-compat.h
+++ b/include/asm-generic/pci-dma-compat.h
@@ -99,9 +99,9 @@ pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
 }
 
 static inline int
-pci_dma_mapping_error(dma_addr_t dma_addr)
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
 {
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(&pdev->dev, dma_addr);
 }
 
 #endif
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index 087325ede76c..a7cdc48e8b78 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -5,6 +5,8 @@
 
 #include <asm-generic/pgtable-nopud.h>
 
+struct mm_struct;
+
 #define __PAGETABLE_PMD_FOLDED
 
 /*
@@ -54,7 +56,9 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
  * inside the pud, so has no extra memory associated with it.
  */
 #define pmd_alloc_one(mm, address)		NULL
-#define pmd_free(mm, x)				do { } while (0)
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+}
 #define __pmd_free_tlb(tlb, x)			do { } while (0)
 
 #undef  pmd_addr_end
diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
new file mode 100644
index 000000000000..abcf34c2fdc7
--- /dev/null
+++ b/include/asm-generic/syscall.h
@@ -0,0 +1,141 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file is a stub providing documentation for what functions
+ * asm-ARCH/syscall.h files need to define.  Most arch definitions
+ * will be simple inlines.
+ *
+ * All of these functions expect to be called with no locks,
+ * and only when the caller is sure that the task of interest
+ * cannot return to user mode while we are looking at it.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+struct task_struct;
+struct pt_regs;
+
+/**
+ * syscall_get_nr - find what system call a task is executing
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * If @task is executing a system call or is at system call
+ * tracing about to attempt one, returns the system call number.
+ * If @task is not executing a system call, i.e. it's blocked
+ * inside the kernel for a fault or signal, returns -1.
+ *
+ * It's only valid to call this when @task is known to be blocked.
+ */
+long syscall_get_nr(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_rollback - roll back registers after an aborted system call
+ * @task:	task of interest, must be in system call exit tracing
+ * @regs:	task_pt_regs() of @task
+ *
+ * It's only valid to call this when @task is stopped for system
+ * call exit tracing (due to TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT),
+ * after tracehook_report_syscall_entry() returned nonzero to prevent
+ * the system call from taking place.
+ *
+ * This rolls back the register state in @regs so it's as if the
+ * system call instruction was a no-op.  The registers containing
+ * the system call number and arguments are as they were before the
+ * system call instruction.  This may not be the same as what the
+ * register state looked like at system call entry tracing.
+ */
+void syscall_rollback(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_error - check result of traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns 0 if the system call succeeded, or -ERRORCODE if it failed.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_error(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_return_value - get the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns the return value of the successful system call.
+ * This value is meaningless if syscall_get_error() returned nonzero.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_set_return_value - change the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @error:	negative error code, or zero to indicate success
+ * @val:	user return value if @error is zero
+ *
+ * This changes the results of the system call that user mode will see.
+ * If @error is zero, the user sees a successful system call with a
+ * return value of @val.  If @error is nonzero, it's a negated errno
+ * code; the user sees a failed system call with this errno code.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			      int error, long val);
+
+/**
+ * syscall_get_arguments - extract system call parameter values
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array filled with argument values
+ *
+ * Fetches @n arguments to the system call starting with the @i'th argument
+ * (from 0 through 5).  Argument @i is stored in @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n, unsigned long *args);
+
+/**
+ * syscall_set_arguments - change system call parameter value
+ * @task:	task of interest, must be in system call entry tracing
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array of argument values to store
+ *
+ * Changes @n arguments to the system call starting with the @i'th argument.
+ * @n'th argument to @val.  Argument @i gets value @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n,
+			   const unsigned long *args);
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 729f6b0a60e9..cb752ba72466 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -221,6 +221,7 @@
  * during second ld run in second ld pass when generating System.map */
 #define TEXT_TEXT							\
 		ALIGN_FUNCTION();					\
+		*(.text.hot)						\
 		*(.text)						\
 		*(.ref.text)						\
 		*(.text.init.refok)					\
@@ -230,7 +231,8 @@
 	CPU_KEEP(init.text)						\
 	CPU_KEEP(exit.text)						\
 	MEM_KEEP(init.text)						\
-	MEM_KEEP(exit.text)
+	MEM_KEEP(exit.text)						\
+		*(.text.unlikely)
 
 
 /* sched.text is aling to function alignment to secure we have same
@@ -331,9 +333,9 @@
 #define BUG_TABLE							\
 	. = ALIGN(8);							\
 	__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) {		\
-		__start___bug_table = .;				\
+		VMLINUX_SYMBOL(__start___bug_table) = .;		\
 		*(__bug_table)						\
-		__stop___bug_table = .;					\
+		VMLINUX_SYMBOL(__stop___bug_table) = .;			\
 	}
 #else
 #define BUG_TABLE
@@ -343,9 +345,9 @@
 #define TRACEDATA							\
 	. = ALIGN(4);							\
 	.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {		\
-	  	__tracedata_start = .;					\
+		VMLINUX_SYMBOL(__tracedata_start) = .;			\
 		*(.tracedata)						\
-	  	__tracedata_end = .;					\
+		VMLINUX_SYMBOL(__tracedata_end) = .;			\
 	}
 #else
 #define TRACEDATA
@@ -359,6 +361,8 @@
 	}
 
 #define INITCALLS							\
+	*(.initcallearly.init)						\
+	VMLINUX_SYMBOL(__early_initcall_end) = .;			\
   	*(.initcall0.init)						\
   	*(.initcall0s.init)						\
   	*(.initcall1.init)						\
@@ -379,9 +383,9 @@
 
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
-	__per_cpu_start = .;						\
+	VMLINUX_SYMBOL(__per_cpu_start) = .;				\
 	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {		\
 		*(.data.percpu)						\
 		*(.data.percpu.shared_aligned)				\
 	}								\
-	__per_cpu_end = .;
+	VMLINUX_SYMBOL(__per_cpu_end) = .;
diff --git a/include/asm-h8300/elf.h b/include/asm-h8300/elf.h
index 26bfc7e641da..a8b57d1f4128 100644
--- a/include/asm-h8300/elf.h
+++ b/include/asm-h8300/elf.h
@@ -26,10 +26,10 @@ typedef unsigned long elf_fpregset_t;
 #define ELF_DATA	ELFDATA2MSB
 #define ELF_ARCH	EM_H8_300
 #if defined(__H8300H__)
-#define ELF_FLAGS       0x810000
+#define ELF_CORE_EFLAGS 0x810000
 #endif
 #if defined(__H8300S__)
-#define ELF_FLAGS       0x820000
+#define ELF_CORE_EFLAGS 0x820000
 #endif
 
 #define ELF_PLAT_INIT(_r)	_r->er1 = 0
diff --git a/include/asm-h8300/ide.h b/include/asm-h8300/ide.h
deleted file mode 100644
index f8535ce7476e..000000000000
--- a/include/asm-h8300/ide.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/****************************************************************************/
-
-/*
- *  linux/include/asm-h8300/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- *  Copyright (C) 2001       Lineo Inc., davidm@snapgear.com
- *  Copyright (C) 2002       Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 2002       Yoshinori Sato (ysato@users.sourceforge.jp)
- */
-
-/****************************************************************************/
-#ifndef _H8300_IDE_H
-#define _H8300_IDE_H
-/****************************************************************************/
-#ifdef __KERNEL__
-/****************************************************************************/
-
-#define MAX_HWIFS	1
-
-#include <asm-generic/ide_iops.h>
-
-/****************************************************************************/
-#endif /* __KERNEL__ */
-#endif /* _H8300_IDE_H */
-/****************************************************************************/
diff --git a/include/asm-h8300/keyboard.h b/include/asm-h8300/keyboard.h
deleted file mode 100644
index 90efbd655390..000000000000
--- a/include/asm-h8300/keyboard.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-h8300/keyboard.h
- *  Created 04 Dec 2001 by Khaled Hassounah <khassounah@mediumware.net>
- *  This file contains the Dragonball architecture specific keyboard definitions
- */
-
-#ifndef _H8300_KEYBOARD_H
-#define _H8300_KEYBOARD_H
-
-
-/* dummy i.e. no real keyboard */
-#define kbd_setkeycode(x...)	(-ENOSYS)
-#define kbd_getkeycode(x...)	(-ENOSYS)
-#define kbd_translate(x...)	(0)
-#define kbd_unexpected_up(x...)	(1)
-#define kbd_leds(x...)		do {;} while (0)
-#define kbd_init_hw(x...)	do {;} while (0)
-#define kbd_enable_irq(x...)	do {;} while (0)
-#define kbd_disable_irq(x...)	do {;} while (0)
-
-#endif  /* _H8300_KEYBOARD_H */
-
-
-
diff --git a/include/asm-h8300/kvm.h b/include/asm-h8300/kvm.h
deleted file mode 100644
index bdbed7b987e1..000000000000
--- a/include/asm-h8300/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_H8300_H
-#define __LINUX_KVM_H8300_H
-
-/* h8300 does not support KVM */
-
-#endif
diff --git a/include/asm-h8300/namei.h b/include/asm-h8300/namei.h
deleted file mode 100644
index ab6f196db6e0..000000000000
--- a/include/asm-h8300/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-h8300/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __H8300_NAMEI_H
-#define __H8300_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-h8300/page.h b/include/asm-h8300/page.h
index d6a3eaf3b27e..0b6acf0b03aa 100644
--- a/include/asm-h8300/page.h
+++ b/include/asm-h8300/page.h
@@ -43,9 +43,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/include/asm-h8300/semaphore.h b/include/asm-h8300/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-h8300/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-h8300/thread_info.h b/include/asm-h8300/thread_info.h
index 27bb95e2944c..aafd4d322ec3 100644
--- a/include/asm-h8300/thread_info.h
+++ b/include/asm-h8300/thread_info.h
@@ -49,6 +49,7 @@ struct thread_info {
 /*
  * Size of kernel stack for each process. This must be a power of 2...
  */
+#define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		8192	/* 2 pages */
 
 
@@ -65,10 +66,6 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/include/asm-ia64/Kbuild b/include/asm-ia64/Kbuild
deleted file mode 100644
index eb24a3f47caa..000000000000
--- a/include/asm-ia64/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += break.h
-header-y += fpu.h
-header-y += fpswa.h
-header-y += ia64regs.h
-header-y += intel_intrin.h
-header-y += intrinsics.h
-header-y += perfmon_default_smpl.h
-header-y += ptrace_offsets.h
-header-y += rse.h
-header-y += ucontext.h
-
-unifdef-y += gcc_intrin.h
-unifdef-y += perfmon.h
-unifdef-y += ustack.h
diff --git a/include/asm-ia64/a.out.h b/include/asm-ia64/a.out.h
deleted file mode 100644
index 193dcfb67596..000000000000
--- a/include/asm-ia64/a.out.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _ASM_IA64_A_OUT_H
-#define _ASM_IA64_A_OUT_H
-
-/*
- * No a.out format has been (or should be) defined so this file is
- * just a dummy that allows us to get binfmt_elf compiled.  It
- * probably would be better to clean up binfmt_elf.c so it does not
- * necessarily depend on there being a.out support.
- *
- * Modified 1998-2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
- */
-
-#include <linux/types.h>
-
-struct exec {
-	unsigned long a_info;
-	unsigned long a_text;
-	unsigned long a_data;
-	unsigned long a_bss;
-	unsigned long a_entry;
-};
-
-#define N_TXTADDR(x)	0
-#define N_DATADDR(x)	0
-#define N_BSSADDR(x)	0
-#define N_DRSIZE(x)	0
-#define N_TRSIZE(x)	0
-#define N_SYMSIZE(x)	0
-#define N_TXTOFF(x)	0
-
-#endif /* _ASM_IA64_A_OUT_H */
diff --git a/include/asm-ia64/acpi-ext.h b/include/asm-ia64/acpi-ext.h
deleted file mode 100644
index 734d137dda6e..000000000000
--- a/include/asm-ia64/acpi-ext.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P.
- *	Alex Williamson <alex.williamson@hp.com>
- *	Bjorn Helgaas <bjorn.helgaas@hp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Vendor specific extensions to ACPI.
- */
-
-#ifndef _ASM_IA64_ACPI_EXT_H
-#define _ASM_IA64_ACPI_EXT_H
-
-#include <linux/types.h>
-#include <acpi/actypes.h>
-
-extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
-
-#endif /* _ASM_IA64_ACPI_EXT_H */
diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h
deleted file mode 100644
index fcfad326f4c7..000000000000
--- a/include/asm-ia64/acpi.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- *  asm-ia64/acpi.h
- *
- *  Copyright (C) 1999 VA Linux Systems
- *  Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
- *  Copyright (C) 2001,2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#ifndef _ASM_ACPI_H
-#define _ASM_ACPI_H
-
-#ifdef __KERNEL__
-
-#include <acpi/pdc_intel.h>
-
-#include <linux/init.h>
-#include <linux/numa.h>
-#include <asm/system.h>
-#include <asm/numa.h>
-
-#define COMPILER_DEPENDENT_INT64	long
-#define COMPILER_DEPENDENT_UINT64	unsigned long
-
-/*
- * Calling conventions:
- *
- * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
- * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
- * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
- * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
- */
-#define ACPI_SYSTEM_XFACE
-#define ACPI_EXTERNAL_XFACE
-#define ACPI_INTERNAL_XFACE
-#define ACPI_INTERNAL_VAR_XFACE
-
-/* Asm macros */
-
-#define ACPI_ASM_MACROS
-#define BREAKPOINT3
-#define ACPI_DISABLE_IRQS() local_irq_disable()
-#define ACPI_ENABLE_IRQS()  local_irq_enable()
-#define ACPI_FLUSH_CPU_CACHE()
-
-static inline int
-ia64_acpi_acquire_global_lock (unsigned int *lock)
-{
-	unsigned int old, new, val;
-	do {
-		old = *lock;
-		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
-		val = ia64_cmpxchg4_acq(lock, new, old);
-	} while (unlikely (val != old));
-	return (new < 3) ? -1 : 0;
-}
-
-static inline int
-ia64_acpi_release_global_lock (unsigned int *lock)
-{
-	unsigned int old, new, val;
-	do {
-		old = *lock;
-		new = old & ~0x3;
-		val = ia64_cmpxchg4_acq(lock, new, old);
-	} while (unlikely (val != old));
-	return old & 0x1;
-}
-
-#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq)				\
-	((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock))
-
-#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq)				\
-	((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
-
-#define acpi_disabled 0	/* ACPI always enabled on IA64 */
-#define acpi_noirq 0	/* ACPI always enabled on IA64 */
-#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
-#define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
-#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
-static inline void disable_acpi(void) { }
-
-const char *acpi_get_sysname (void);
-int acpi_request_vector (u32 int_type);
-int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
-
-/* routines for saving/restoring kernel state */
-extern int acpi_save_state_mem(void);
-extern void acpi_restore_state_mem(void);
-extern unsigned long acpi_wakeup_address;
-
-/*
- * Record the cpei override flag and current logical cpu. This is
- * useful for CPU removal.
- */
-extern unsigned int can_cpei_retarget(void);
-extern unsigned int is_cpu_cpei_target(unsigned int cpu);
-extern void set_cpei_target_cpu(unsigned int cpu);
-extern unsigned int get_cpei_target_cpu(void);
-extern void prefill_possible_map(void);
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-extern int additional_cpus;
-#else
-#define additional_cpus 0
-#endif
-
-#ifdef CONFIG_ACPI_NUMA
-#if MAX_NUMNODES > 256
-#define MAX_PXM_DOMAINS MAX_NUMNODES
-#else
-#define MAX_PXM_DOMAINS (256)
-#endif
-extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
-extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
-#endif
-
-#define acpi_unlazy_tlb(x)
-
-#ifdef CONFIG_ACPI_NUMA
-extern cpumask_t early_cpu_possible_map;
-#define for_each_possible_early_cpu(cpu)  \
-	for_each_cpu_mask((cpu), early_cpu_possible_map)
-
-static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus)
-{
-	int low_cpu, high_cpu;
-	int cpu;
-	int next_nid = 0;
-
-	low_cpu = cpus_weight(early_cpu_possible_map);
-
-	high_cpu = max(low_cpu, min_cpus);
-	high_cpu = min(high_cpu + reserve_cpus, NR_CPUS);
-
-	for (cpu = low_cpu; cpu < high_cpu; cpu++) {
-		cpu_set(cpu, early_cpu_possible_map);
-		if (node_cpuid[cpu].nid == NUMA_NO_NODE) {
-			node_cpuid[cpu].nid = next_nid;
-			next_nid++;
-			if (next_nid >= num_online_nodes())
-				next_nid = 0;
-		}
-	}
-}
-#endif /* CONFIG_ACPI_NUMA */
-
-#endif /*__KERNEL__*/
-
-#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h
deleted file mode 100644
index c11fdd8ab4d7..000000000000
--- a/include/asm-ia64/agp.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _ASM_IA64_AGP_H
-#define _ASM_IA64_AGP_H
-
-/*
- * IA-64 specific AGP definitions.
- *
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-/*
- * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate
- * in coherent mode, which lets us map the AGP memory as normal (write-back) memory
- * (unlike x86, where it gets mapped "write-coalescing").
- */
-#define map_page_into_agp(page)		/* nothing */
-#define unmap_page_from_agp(page)	/* nothing */
-#define flush_agp_cache()		mb()
-
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif /* _ASM_IA64_AGP_H */
diff --git a/include/asm-ia64/asmmacro.h b/include/asm-ia64/asmmacro.h
deleted file mode 100644
index c1642fd64029..000000000000
--- a/include/asm-ia64/asmmacro.h
+++ /dev/null
@@ -1,135 +0,0 @@
-#ifndef _ASM_IA64_ASMMACRO_H
-#define _ASM_IA64_ASMMACRO_H
-
-/*
- * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-
-#define ENTRY(name)				\
-	.align 32;				\
-	.proc name;				\
-name:
-
-#define ENTRY_MIN_ALIGN(name)			\
-	.align 16;				\
-	.proc name;				\
-name:
-
-#define GLOBAL_ENTRY(name)			\
-	.global name;				\
-	ENTRY(name)
-
-#define END(name)				\
-	.endp name
-
-/*
- * Helper macros to make unwind directives more readable:
- */
-
-/* prologue_gr: */
-#define ASM_UNW_PRLG_RP			0x8
-#define ASM_UNW_PRLG_PFS		0x4
-#define ASM_UNW_PRLG_PSP		0x2
-#define ASM_UNW_PRLG_PR			0x1
-#define ASM_UNW_PRLG_GRSAVE(ninputs)	(32+(ninputs))
-
-/*
- * Helper macros for accessing user memory.
- *
- * When adding any new .section/.previous entries here, make sure to
- * also add it to the DISCARD section in arch/ia64/kernel/gate.lds.S or
- * unpleasant things will happen.
- */
-
-	.section "__ex_table", "a"		// declare section & section attributes
-	.previous
-
-# define EX(y,x...)				\
-	.xdata4 "__ex_table", 99f-., y-.;	\
-  [99:]	x
-# define EXCLR(y,x...)				\
-	.xdata4 "__ex_table", 99f-., y-.+4;	\
-  [99:]	x
-
-/*
- * Tag MCA recoverable instruction ranges.
- */
-
-	.section "__mca_table", "a"		// declare section & section attributes
-	.previous
-
-# define MCA_RECOVER_RANGE(y)			\
-	.xdata4 "__mca_table", y-., 99f-.;	\
-  [99:]
-
-/*
- * Mark instructions that need a load of a virtual address patched to be
- * a load of a physical address.  We use this either in critical performance
- * path (ivt.S - TLB miss processing) or in places where it might not be
- * safe to use a "tpa" instruction (mca_asm.S - error recovery).
- */
-	.section ".data.patch.vtop", "a"	// declare section & section attributes
-	.previous
-
-#define	LOAD_PHYSICAL(pr, reg, obj)		\
-[1:](pr)movl reg = obj;				\
-	.xdata4 ".data.patch.vtop", 1b-.
-
-/*
- * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
- * we'll patch out the work-around bundles with NOPs, so their impact is minimal.
- */
-#define DO_MCKINLEY_E9_WORKAROUND
-
-#ifdef DO_MCKINLEY_E9_WORKAROUND
-	.section ".data.patch.mckinley_e9", "a"
-	.previous
-/* workaround for Itanium 2 Errata 9: */
-# define FSYS_RETURN					\
-	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
-1:{ .mib;						\
-	nop.m 0;					\
-	mov r16=ar.pfs;					\
-	br.call.sptk.many b7=2f;;			\
-  };							\
-2:{ .mib;						\
-	nop.m 0;					\
-	mov ar.pfs=r16;					\
-	br.ret.sptk.many b6;;				\
-  }
-#else
-# define FSYS_RETURN	br.ret.sptk.many b6
-#endif
-
-/*
- * If physical stack register size is different from DEF_NUM_STACK_REG,
- * dynamically patch the kernel for correct size.
- */
-	.section ".data.patch.phys_stack_reg", "a"
-	.previous
-#define LOAD_PHYS_STACK_REG_SIZE(reg)			\
-[1:]	adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0;	\
-	.xdata4 ".data.patch.phys_stack_reg", 1b-.
-
-/*
- * Up until early 2004, use of .align within a function caused bad unwind info.
- * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing
- * otherwise.
- */
-#ifdef HAVE_WORKING_TEXT_ALIGN
-# define TEXT_ALIGN(n)	.align n
-#else
-# define TEXT_ALIGN(n)
-#endif
-
-#ifdef HAVE_SERIALIZE_DIRECTIVE
-# define dv_serialize_data		.serialize.data
-# define dv_serialize_instruction	.serialize.instruction
-#else
-# define dv_serialize_data
-# define dv_serialize_instruction
-#endif
-
-#endif /* _ASM_IA64_ASMMACRO_H */
diff --git a/include/asm-ia64/atomic.h b/include/asm-ia64/atomic.h
deleted file mode 100644
index 50c2b83fd5a0..000000000000
--- a/include/asm-ia64/atomic.h
+++ /dev/null
@@ -1,226 +0,0 @@
-#ifndef _ASM_IA64_ATOMIC_H
-#define _ASM_IA64_ATOMIC_H
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- *
- * NOTE: don't mess with the types below!  The "unsigned long" and
- * "int" types were carefully placed so as to ensure proper operation
- * of the macros.
- *
- * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-#include <linux/types.h>
-
-#include <asm/intrinsics.h>
-#include <asm/system.h>
-
-/*
- * On IA-64, counter must always be volatile to ensure that that the
- * memory accesses are ordered.
- */
-typedef struct { volatile __s32 counter; } atomic_t;
-typedef struct { volatile __s64 counter; } atomic64_t;
-
-#define ATOMIC_INIT(i)		((atomic_t) { (i) })
-#define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
-
-#define atomic_read(v)		((v)->counter)
-#define atomic64_read(v)	((v)->counter)
-
-#define atomic_set(v,i)		(((v)->counter) = (i))
-#define atomic64_set(v,i)	(((v)->counter) = (i))
-
-static __inline__ int
-ia64_atomic_add (int i, atomic_t *v)
-{
-	__s32 old, new;
-	CMPXCHG_BUGCHECK_DECL
-
-	do {
-		CMPXCHG_BUGCHECK(v);
-		old = atomic_read(v);
-		new = old + i;
-	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
-	return new;
-}
-
-static __inline__ int
-ia64_atomic64_add (__s64 i, atomic64_t *v)
-{
-	__s64 old, new;
-	CMPXCHG_BUGCHECK_DECL
-
-	do {
-		CMPXCHG_BUGCHECK(v);
-		old = atomic64_read(v);
-		new = old + i;
-	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
-	return new;
-}
-
-static __inline__ int
-ia64_atomic_sub (int i, atomic_t *v)
-{
-	__s32 old, new;
-	CMPXCHG_BUGCHECK_DECL
-
-	do {
-		CMPXCHG_BUGCHECK(v);
-		old = atomic_read(v);
-		new = old - i;
-	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
-	return new;
-}
-
-static __inline__ int
-ia64_atomic64_sub (__s64 i, atomic64_t *v)
-{
-	__s64 old, new;
-	CMPXCHG_BUGCHECK_DECL
-
-	do {
-		CMPXCHG_BUGCHECK(v);
-		old = atomic64_read(v);
-		new = old - i;
-	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
-	return new;
-}
-
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-#define atomic64_cmpxchg(v, old, new) \
-	(cmpxchg(&((v)->counter), old, new))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
-{
-	long c, old;
-	c = atomic64_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic64_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#define atomic_add_return(i,v)						\
-({									\
-	int __ia64_aar_i = (i);						\
-	(__builtin_constant_p(i)					\
-	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
-	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
-	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
-	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
-		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
-		: ia64_atomic_add(__ia64_aar_i, v);			\
-})
-
-#define atomic64_add_return(i,v)					\
-({									\
-	long __ia64_aar_i = (i);					\
-	(__builtin_constant_p(i)					\
-	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
-	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
-	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
-	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
-		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
-		: ia64_atomic64_add(__ia64_aar_i, v);			\
-})
-
-/*
- * Atomically add I to V and return TRUE if the resulting value is
- * negative.
- */
-static __inline__ int
-atomic_add_negative (int i, atomic_t *v)
-{
-	return atomic_add_return(i, v) < 0;
-}
-
-static __inline__ int
-atomic64_add_negative (__s64 i, atomic64_t *v)
-{
-	return atomic64_add_return(i, v) < 0;
-}
-
-#define atomic_sub_return(i,v)						\
-({									\
-	int __ia64_asr_i = (i);						\
-	(__builtin_constant_p(i)					\
-	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
-	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
-	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
-	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
-		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
-		: ia64_atomic_sub(__ia64_asr_i, v);			\
-})
-
-#define atomic64_sub_return(i,v)					\
-({									\
-	long __ia64_asr_i = (i);					\
-	(__builtin_constant_p(i)					\
-	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
-	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
-	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
-	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
-		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
-		: ia64_atomic64_sub(__ia64_asr_i, v);			\
-})
-
-#define atomic_dec_return(v)		atomic_sub_return(1, (v))
-#define atomic_inc_return(v)		atomic_add_return(1, (v))
-#define atomic64_dec_return(v)		atomic64_sub_return(1, (v))
-#define atomic64_inc_return(v)		atomic64_add_return(1, (v))
-
-#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
-#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
-#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
-#define atomic64_dec_and_test(v)	(atomic64_sub_return(1, (v)) == 0)
-#define atomic64_inc_and_test(v)	(atomic64_add_return(1, (v)) == 0)
-
-#define atomic_add(i,v)			atomic_add_return((i), (v))
-#define atomic_sub(i,v)			atomic_sub_return((i), (v))
-#define atomic_inc(v)			atomic_add(1, (v))
-#define atomic_dec(v)			atomic_sub(1, (v))
-
-#define atomic64_add(i,v)		atomic64_add_return((i), (v))
-#define atomic64_sub(i,v)		atomic64_sub_return((i), (v))
-#define atomic64_inc(v)			atomic64_add(1, (v))
-#define atomic64_dec(v)			atomic64_sub(1, (v))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* _ASM_IA64_ATOMIC_H */
diff --git a/include/asm-ia64/auxvec.h b/include/asm-ia64/auxvec.h
deleted file mode 100644
index 23cebe5685b9..000000000000
--- a/include/asm-ia64/auxvec.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_IA64_AUXVEC_H
-#define _ASM_IA64_AUXVEC_H
-
-/*
- * Architecture-neutral AT_ values are in the range 0-17.  Leave some room for more of
- * them, start the architecture-specific ones at 32.
- */
-#define AT_SYSINFO	32
-#define AT_SYSINFO_EHDR	33
-
-#endif /* _ASM_IA64_AUXVEC_H */
diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h
deleted file mode 100644
index e2ca80037335..000000000000
--- a/include/asm-ia64/bitops.h
+++ /dev/null
@@ -1,468 +0,0 @@
-#ifndef _ASM_IA64_BITOPS_H
-#define _ASM_IA64_BITOPS_H
-
-/*
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64
- * O(1) scheduler patch
- */
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/intrinsics.h>
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered.  See __set_bit()
- * if you do not require the atomic guarantees.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- *
- * The address must be (at least) "long" aligned.
- * Note that there are driver (e.g., eepro100) which use these operations to
- * operate on hw-defined data-structures, so we can't easily change these
- * operations to force a bigger alignment.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-static __inline__ void
-set_bit (int nr, volatile void *addr)
-{
-	__u32 bit, old, new;
-	volatile __u32 *m;
-	CMPXCHG_BUGCHECK_DECL
-
-	m = (volatile __u32 *) addr + (nr >> 5);
-	bit = 1 << (nr & 31);
-	do {
-		CMPXCHG_BUGCHECK(m);
-		old = *m;
-		new = old | bit;
-	} while (cmpxchg_acq(m, old, new) != old);
-}
-
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void
-__set_bit (int nr, volatile void *addr)
-{
-	*((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
-}
-
-/*
- * clear_bit() has "acquire" semantics.
- */
-#define smp_mb__before_clear_bit()	smp_mb()
-#define smp_mb__after_clear_bit()	do { /* skip */; } while (0)
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered.  However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static __inline__ void
-clear_bit (int nr, volatile void *addr)
-{
-	__u32 mask, old, new;
-	volatile __u32 *m;
-	CMPXCHG_BUGCHECK_DECL
-
-	m = (volatile __u32 *) addr + (nr >> 5);
-	mask = ~(1 << (nr & 31));
-	do {
-		CMPXCHG_BUGCHECK(m);
-		old = *m;
-		new = old & mask;
-	} while (cmpxchg_acq(m, old, new) != old);
-}
-
-/**
- * clear_bit_unlock - Clears a bit in memory with release
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit_unlock() is atomic and may not be reordered.  It does
- * contain a memory barrier suitable for unlock type operations.
- */
-static __inline__ void
-clear_bit_unlock (int nr, volatile void *addr)
-{
-	__u32 mask, old, new;
-	volatile __u32 *m;
-	CMPXCHG_BUGCHECK_DECL
-
-	m = (volatile __u32 *) addr + (nr >> 5);
-	mask = ~(1 << (nr & 31));
-	do {
-		CMPXCHG_BUGCHECK(m);
-		old = *m;
-		new = old & mask;
-	} while (cmpxchg_rel(m, old, new) != old);
-}
-
-/**
- * __clear_bit_unlock - Non-atomically clears a bit in memory with release
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * Similarly to clear_bit_unlock, the implementation uses a store
- * with release semantics. See also __raw_spin_unlock().
- */
-static __inline__ void
-__clear_bit_unlock(int nr, void *addr)
-{
-	__u32 * const m = (__u32 *) addr + (nr >> 5);
-	__u32 const new = *m & ~(1 << (nr & 31));
-
-	ia64_st4_rel_nta(m, new);
-}
-
-/**
- * __clear_bit - Clears a bit in memory (non-atomic version)
- * @nr: the bit to clear
- * @addr: the address to start counting from
- *
- * Unlike clear_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void
-__clear_bit (int nr, volatile void *addr)
-{
-	*((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31));
-}
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to toggle
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void
-change_bit (int nr, volatile void *addr)
-{
-	__u32 bit, old, new;
-	volatile __u32 *m;
-	CMPXCHG_BUGCHECK_DECL
-
-	m = (volatile __u32 *) addr + (nr >> 5);
-	bit = (1 << (nr & 31));
-	do {
-		CMPXCHG_BUGCHECK(m);
-		old = *m;
-		new = old ^ bit;
-	} while (cmpxchg_acq(m, old, new) != old);
-}
-
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to toggle
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void
-__change_bit (int nr, volatile void *addr)
-{
-	*((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.  
- * It also implies the acquisition side of the memory barrier.
- */
-static __inline__ int
-test_and_set_bit (int nr, volatile void *addr)
-{
-	__u32 bit, old, new;
-	volatile __u32 *m;
-	CMPXCHG_BUGCHECK_DECL
-
-	m = (volatile __u32 *) addr + (nr >> 5);
-	bit = 1 << (nr & 31);
-	do {
-		CMPXCHG_BUGCHECK(m);
-		old = *m;
-		new = old | bit;
-	} while (cmpxchg_acq(m, old, new) != old);
-	return (old & bit) != 0;
-}
-
-/**
- * test_and_set_bit_lock - Set a bit and return its old value for lock
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This is the same as test_and_set_bit on ia64
- */
-#define test_and_set_bit_lock test_and_set_bit
-
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.  
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int
-__test_and_set_bit (int nr, volatile void *addr)
-{
-	__u32 *p = (__u32 *) addr + (nr >> 5);
-	__u32 m = 1 << (nr & 31);
-	int oldbitset = (*p & m) != 0;
-
-	*p |= m;
-	return oldbitset;
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.  
- * It also implies the acquisition side of the memory barrier.
- */
-static __inline__ int
-test_and_clear_bit (int nr, volatile void *addr)
-{
-	__u32 mask, old, new;
-	volatile __u32 *m;
-	CMPXCHG_BUGCHECK_DECL
-
-	m = (volatile __u32 *) addr + (nr >> 5);
-	mask = ~(1 << (nr & 31));
-	do {
-		CMPXCHG_BUGCHECK(m);
-		old = *m;
-		new = old & mask;
-	} while (cmpxchg_acq(m, old, new) != old);
-	return (old & ~mask) != 0;
-}
-
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.  
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int
-__test_and_clear_bit(int nr, volatile void * addr)
-{
-	__u32 *p = (__u32 *) addr + (nr >> 5);
-	__u32 m = 1 << (nr & 31);
-	int oldbitset = *p & m;
-
-	*p &= ~m;
-	return oldbitset;
-}
-
-/**
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.  
- * It also implies the acquisition side of the memory barrier.
- */
-static __inline__ int
-test_and_change_bit (int nr, volatile void *addr)
-{
-	__u32 bit, old, new;
-	volatile __u32 *m;
-	CMPXCHG_BUGCHECK_DECL
-
-	m = (volatile __u32 *) addr + (nr >> 5);
-	bit = (1 << (nr & 31));
-	do {
-		CMPXCHG_BUGCHECK(m);
-		old = *m;
-		new = old ^ bit;
-	} while (cmpxchg_acq(m, old, new) != old);
-	return (old & bit) != 0;
-}
-
-/**
- * __test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- */
-static __inline__ int
-__test_and_change_bit (int nr, void *addr)
-{
-	__u32 old, bit = (1 << (nr & 31));
-	__u32 *m = (__u32 *) addr + (nr >> 5);
-
-	old = *m;
-	*m = old ^ bit;
-	return (old & bit) != 0;
-}
-
-static __inline__ int
-test_bit (int nr, const volatile void *addr)
-{
-	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
-}
-
-/**
- * ffz - find the first zero bit in a long word
- * @x: The long word to find the bit in
- *
- * Returns the bit-number (0..63) of the first (least significant) zero bit.
- * Undefined if no zero exists, so code should check against ~0UL first...
- */
-static inline unsigned long
-ffz (unsigned long x)
-{
-	unsigned long result;
-
-	result = ia64_popcnt(x & (~x - 1));
-	return result;
-}
-
-/**
- * __ffs - find first bit in word.
- * @x: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static __inline__ unsigned long
-__ffs (unsigned long x)
-{
-	unsigned long result;
-
-	result = ia64_popcnt((x-1) & ~x);
-	return result;
-}
-
-#ifdef __KERNEL__
-
-/*
- * Return bit number of last (most-significant) bit set.  Undefined
- * for x==0.  Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3).
- */
-static inline unsigned long
-ia64_fls (unsigned long x)
-{
-	long double d = x;
-	long exp;
-
-	exp = ia64_getf_exp(d);
-	return exp - 0xffff;
-}
-
-/*
- * Find the last (most significant) bit set.  Returns 0 for x==0 and
- * bits are numbered from 1..32 (e.g., fls(9) == 4).
- */
-static inline int
-fls (int t)
-{
-	unsigned long x = t & 0xffffffffu;
-
-	if (!x)
-		return 0;
-	x |= x >> 1;
-	x |= x >> 2;
-	x |= x >> 4;
-	x |= x >> 8;
-	x |= x >> 16;
-	return ia64_popcnt(x);
-}
-
-/*
- * Find the last (most significant) bit set.  Undefined for x==0.
- * Bits are numbered from 0..63 (e.g., __fls(9) == 3).
- */
-static inline unsigned long
-__fls (unsigned long x)
-{
-	x |= x >> 1;
-	x |= x >> 2;
-	x |= x >> 4;
-	x |= x >> 8;
-	x |= x >> 16;
-	x |= x >> 32;
-	return ia64_popcnt(x) - 1;
-}
-
-#include <asm-generic/bitops/fls64.h>
-
-/*
- * ffs: find first bit set. This is defined the same way as the libc and
- * compiler builtin ffs routines, therefore differs in spirit from the above
- * ffz (man ffs): it operates on "int" values only and the result value is the
- * bit number + 1.  ffs(0) is defined to return zero.
- */
-#define ffs(x)	__builtin_ffs(x)
-
-/*
- * hweightN: returns the hamming weight (i.e. the number
- * of bits set) of a N-bit word
- */
-static __inline__ unsigned long
-hweight64 (unsigned long x)
-{
-	unsigned long result;
-	result = ia64_popcnt(x);
-	return result;
-}
-
-#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
-#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
-#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/find.h>
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-
-#define ext2_set_bit_atomic(l,n,a)	test_and_set_bit(n,a)
-#define ext2_clear_bit_atomic(l,n,a)	test_and_clear_bit(n,a)
-
-#include <asm-generic/bitops/minix.h>
-#include <asm-generic/bitops/sched.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IA64_BITOPS_H */
diff --git a/include/asm-ia64/break.h b/include/asm-ia64/break.h
deleted file mode 100644
index f03402039896..000000000000
--- a/include/asm-ia64/break.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ASM_IA64_BREAK_H
-#define _ASM_IA64_BREAK_H
-
-/*
- * IA-64 Linux break numbers.
- *
- * Copyright (C) 1999 Hewlett-Packard Co
- * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-/*
- * OS-specific debug break numbers:
- */
-#define __IA64_BREAK_KDB		0x80100
-#define __IA64_BREAK_KPROBE		0x81000 /* .. 0x81fff */
-#define __IA64_BREAK_JPROBE		0x82000
-
-/*
- * OS-specific break numbers:
- */
-#define __IA64_BREAK_SYSCALL		0x100000
-
-#endif /* _ASM_IA64_BREAK_H */
diff --git a/include/asm-ia64/bug.h b/include/asm-ia64/bug.h
deleted file mode 100644
index 823616b5020b..000000000000
--- a/include/asm-ia64/bug.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_IA64_BUG_H
-#define _ASM_IA64_BUG_H
-
-#ifdef CONFIG_BUG
-#define ia64_abort()	__builtin_trap()
-#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0)
-
-/* should this BUG be made generic? */
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/include/asm-ia64/bugs.h b/include/asm-ia64/bugs.h
deleted file mode 100644
index 433523e3b2ed..000000000000
--- a/include/asm-ia64/bugs.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- *
- * Based on <asm-alpha/bugs.h>.
- *
- * Modified 1998, 1999, 2003
- *	David Mosberger-Tang <davidm@hpl.hp.com>,  Hewlett-Packard Co.
- */
-#ifndef _ASM_IA64_BUGS_H
-#define _ASM_IA64_BUGS_H
-
-#include <asm/processor.h>
-
-extern void check_bugs (void);
-
-#endif /* _ASM_IA64_BUGS_H */
diff --git a/include/asm-ia64/byteorder.h b/include/asm-ia64/byteorder.h
deleted file mode 100644
index 69bd41d7c26e..000000000000
--- a/include/asm-ia64/byteorder.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASM_IA64_BYTEORDER_H
-#define _ASM_IA64_BYTEORDER_H
-
-/*
- * Modified 1998, 1999
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
- */
-
-#include <asm/types.h>
-#include <asm/intrinsics.h>
-#include <linux/compiler.h>
-
-static __inline__ __attribute_const__ __u64
-__ia64_swab64 (__u64 x)
-{
-	__u64 result;
-
-	result = ia64_mux1(x, ia64_mux1_rev);
-	return result;
-}
-
-static __inline__ __attribute_const__ __u32
-__ia64_swab32 (__u32 x)
-{
-	return __ia64_swab64(x) >> 32;
-}
-
-static __inline__ __attribute_const__ __u16
-__ia64_swab16(__u16 x)
-{
-	return __ia64_swab64(x) >> 48;
-}
-
-#define __arch__swab64(x) __ia64_swab64(x)
-#define __arch__swab32(x) __ia64_swab32(x)
-#define __arch__swab16(x) __ia64_swab16(x)
-
-#define __BYTEORDER_HAS_U64__
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/include/asm-ia64/cache.h b/include/asm-ia64/cache.h
deleted file mode 100644
index e7482bd628ff..000000000000
--- a/include/asm-ia64/cache.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _ASM_IA64_CACHE_H
-#define _ASM_IA64_CACHE_H
-
-
-/*
- * Copyright (C) 1998-2000 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-/* Bytes per L1 (data) cache line.  */
-#define L1_CACHE_SHIFT		CONFIG_IA64_L1_CACHE_SHIFT
-#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-#ifdef CONFIG_SMP
-# define SMP_CACHE_SHIFT	L1_CACHE_SHIFT
-# define SMP_CACHE_BYTES	L1_CACHE_BYTES
-#else
-  /*
-   * The "aligned" directive can only _increase_ alignment, so this is
-   * safe and provides an easy way to avoid wasting space on a
-   * uni-processor:
-   */
-# define SMP_CACHE_SHIFT	3
-# define SMP_CACHE_BYTES	(1 << 3)
-#endif
-
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
-#endif /* _ASM_IA64_CACHE_H */
diff --git a/include/asm-ia64/cacheflush.h b/include/asm-ia64/cacheflush.h
deleted file mode 100644
index afcfbda76e20..000000000000
--- a/include/asm-ia64/cacheflush.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_IA64_CACHEFLUSH_H
-#define _ASM_IA64_CACHEFLUSH_H
-
-/*
- * Copyright (C) 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <linux/page-flags.h>
-#include <linux/bitops.h>
-
-#include <asm/page.h>
-
-/*
- * Cache flushing routines.  This is the kind of stuff that can be very expensive, so try
- * to avoid them whenever possible.
- */
-
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_icache_page(vma,page)		do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#define flush_dcache_page(page)			\
-do {						\
-	clear_bit(PG_arch_1, &(page)->flags);	\
-} while (0)
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-extern void flush_icache_range (unsigned long start, unsigned long end);
-
-#define flush_icache_user_range(vma, page, user_addr, len)					\
-do {												\
-	unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK);	\
-	flush_icache_range(_addr, _addr + (len));						\
-} while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
-     flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-#endif /* _ASM_IA64_CACHEFLUSH_H */
diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h
deleted file mode 100644
index 97af155057e4..000000000000
--- a/include/asm-ia64/checksum.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _ASM_IA64_CHECKSUM_H
-#define _ASM_IA64_CHECKSUM_H
-
-/*
- * Modified 1998, 1999
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit
- * checksum, already complemented
- */
-extern __sum16 csum_tcpudp_magic (__be32 saddr, __be32 daddr,
-					     unsigned short len,
-					     unsigned short proto,
-					     __wsum sum);
-
-extern __wsum csum_tcpudp_nofold (__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum);
-
-/*
- * Computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * Same as csum_partial, but copies from src while it checksums.
- *
- * Here it is even more important to align src and dst on a 32-bit (or
- * even better 64-bit) boundary.
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-						 int len, __wsum sum,
-						 int *errp);
-
-extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
-					       int len, __wsum sum);
-
-/*
- * This routine is used for miscellaneous IP-like checksums, mainly in
- * icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-/*
- * Fold a partial checksum without adding pseudo headers.
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-	sum = (sum & 0xffff) + (sum >> 16);
-	sum = (sum & 0xffff) + (sum >> 16);
-	return (__force __sum16)~sum;
-}
-
-#define _HAVE_ARCH_IPV6_CSUM	1
-struct in6_addr;
-extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-	const struct in6_addr *daddr, __u32 len, unsigned short proto,
-	__wsum csum);
-
-#endif /* _ASM_IA64_CHECKSUM_H */
diff --git a/include/asm-ia64/compat.h b/include/asm-ia64/compat.h
deleted file mode 100644
index dfcf75b8426d..000000000000
--- a/include/asm-ia64/compat.h
+++ /dev/null
@@ -1,207 +0,0 @@
-#ifndef _ASM_IA64_COMPAT_H
-#define _ASM_IA64_COMPAT_H
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-
-#define COMPAT_USER_HZ	100
-
-typedef u32		compat_size_t;
-typedef s32		compat_ssize_t;
-typedef s32		compat_time_t;
-typedef s32		compat_clock_t;
-typedef s32		compat_key_t;
-typedef s32		compat_pid_t;
-typedef u16		__compat_uid_t;
-typedef u16		__compat_gid_t;
-typedef u32		__compat_uid32_t;
-typedef u32		__compat_gid32_t;
-typedef u16		compat_mode_t;
-typedef u32		compat_ino_t;
-typedef u16		compat_dev_t;
-typedef s32		compat_off_t;
-typedef s64		compat_loff_t;
-typedef u16		compat_nlink_t;
-typedef u16		compat_ipc_pid_t;
-typedef s32		compat_daddr_t;
-typedef u32		compat_caddr_t;
-typedef __kernel_fsid_t	compat_fsid_t;
-typedef s32		compat_timer_t;
-
-typedef s32		compat_int_t;
-typedef s32		compat_long_t;
-typedef s64 __attribute__((aligned(4))) compat_s64;
-typedef u32		compat_uint_t;
-typedef u32		compat_ulong_t;
-typedef u64 __attribute__((aligned(4))) compat_u64;
-
-struct compat_timespec {
-	compat_time_t	tv_sec;
-	s32		tv_nsec;
-};
-
-struct compat_timeval {
-	compat_time_t	tv_sec;
-	s32		tv_usec;
-};
-
-struct compat_stat {
-	compat_dev_t	st_dev;
-	u16		__pad1;
-	compat_ino_t	st_ino;
-	compat_mode_t	st_mode;
-	compat_nlink_t	st_nlink;
-	__compat_uid_t	st_uid;
-	__compat_gid_t	st_gid;
-	compat_dev_t	st_rdev;
-	u16		__pad2;
-	u32		st_size;
-	u32		st_blksize;
-	u32		st_blocks;
-	u32		st_atime;
-	u32		st_atime_nsec;
-	u32		st_mtime;
-	u32		st_mtime_nsec;
-	u32		st_ctime;
-	u32		st_ctime_nsec;
-	u32		__unused4;
-	u32		__unused5;
-};
-
-struct compat_flock {
-	short		l_type;
-	short		l_whence;
-	compat_off_t	l_start;
-	compat_off_t	l_len;
-	compat_pid_t	l_pid;
-};
-
-#define F_GETLK64	12
-#define F_SETLK64	13
-#define F_SETLKW64	14
-
-/*
- * IA32 uses 4 byte alignment for 64 bit quantities,
- * so we need to pack this structure.
- */
-struct compat_flock64 {
-	short		l_type;
-	short		l_whence;
-	compat_loff_t	l_start;
-	compat_loff_t	l_len;
-	compat_pid_t	l_pid;
-} __attribute__((packed));
-
-struct compat_statfs {
-	int		f_type;
-	int		f_bsize;
-	int		f_blocks;
-	int		f_bfree;
-	int		f_bavail;
-	int		f_files;
-	int		f_ffree;
-	compat_fsid_t	f_fsid;
-	int		f_namelen;	/* SunOS ignores this field. */
-	int		f_frsize;
-	int		f_spare[5];
-};
-
-#define COMPAT_RLIM_OLD_INFINITY       0x7fffffff
-#define COMPAT_RLIM_INFINITY           0xffffffff
-
-typedef u32		compat_old_sigset_t;	/* at least 32 bits */
-
-#define _COMPAT_NSIG		64
-#define _COMPAT_NSIG_BPW	32
-
-typedef u32		compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX	0x7fffffff
-#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
-
-struct compat_ipc64_perm {
-	compat_key_t key;
-	__compat_uid32_t uid;
-	__compat_gid32_t gid;
-	__compat_uid32_t cuid;
-	__compat_gid32_t cgid;
-	unsigned short mode;
-	unsigned short __pad1;
-	unsigned short seq;
-	unsigned short __pad2;
-	compat_ulong_t unused1;
-	compat_ulong_t unused2;
-};
-
-struct compat_semid64_ds {
-	struct compat_ipc64_perm sem_perm;
-	compat_time_t  sem_otime;
-	compat_ulong_t __unused1;
-	compat_time_t  sem_ctime;
-	compat_ulong_t __unused2;
-	compat_ulong_t sem_nsems;
-	compat_ulong_t __unused3;
-	compat_ulong_t __unused4;
-};
-
-struct compat_msqid64_ds {
-	struct compat_ipc64_perm msg_perm;
-	compat_time_t  msg_stime;
-	compat_ulong_t __unused1;
-	compat_time_t  msg_rtime;
-	compat_ulong_t __unused2;
-	compat_time_t  msg_ctime;
-	compat_ulong_t __unused3;
-	compat_ulong_t msg_cbytes;
-	compat_ulong_t msg_qnum;
-	compat_ulong_t msg_qbytes;
-	compat_pid_t   msg_lspid;
-	compat_pid_t   msg_lrpid;
-	compat_ulong_t __unused4;
-	compat_ulong_t __unused5;
-};
-
-struct compat_shmid64_ds {
-	struct compat_ipc64_perm shm_perm;
-	compat_size_t  shm_segsz;
-	compat_time_t  shm_atime;
-	compat_ulong_t __unused1;
-	compat_time_t  shm_dtime;
-	compat_ulong_t __unused2;
-	compat_time_t  shm_ctime;
-	compat_ulong_t __unused3;
-	compat_pid_t   shm_cpid;
-	compat_pid_t   shm_lpid;
-	compat_ulong_t shm_nattch;
-	compat_ulong_t __unused4;
-	compat_ulong_t __unused5;
-};
-
-/*
- * A pointer passed in from user mode. This should not be used for syscall parameters,
- * just declare them as pointers because the syscall entry code will have appropriately
- * converted them already.
- */
-typedef	u32		compat_uptr_t;
-
-static inline void __user *
-compat_ptr (compat_uptr_t uptr)
-{
-	return (void __user *) (unsigned long) uptr;
-}
-
-static inline compat_uptr_t
-ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
-static __inline__ void __user *
-compat_alloc_user_space (long len)
-{
-	struct pt_regs *regs = task_pt_regs(current);
-	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);
-}
-
-#endif /* _ASM_IA64_COMPAT_H */
diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h
deleted file mode 100644
index fcca30b9f110..000000000000
--- a/include/asm-ia64/cpu.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_IA64_CPU_H_
-#define _ASM_IA64_CPU_H_
-
-#include <linux/device.h>
-#include <linux/cpu.h>
-#include <linux/topology.h>
-#include <linux/percpu.h>
-
-struct ia64_cpu {
-	struct cpu cpu;
-};
-
-DECLARE_PER_CPU(struct ia64_cpu, cpu_devices);
-
-DECLARE_PER_CPU(int, cpu_state);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern int arch_register_cpu(int num);
-extern void arch_unregister_cpu(int);
-#endif
-
-#endif /* _ASM_IA64_CPU_H_ */
diff --git a/include/asm-ia64/cputime.h b/include/asm-ia64/cputime.h
deleted file mode 100644
index f9abdec6577a..000000000000
--- a/include/asm-ia64/cputime.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * include/asm-ia64/cputime.h:
- *		Definitions for measuring cputime on ia64 machines.
- *
- * Based on <asm-powerpc/cputime.h>.
- *
- * Copyright (C) 2007 FUJITSU LIMITED
- * Copyright (C) 2007 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
- * Otherwise we measure cpu time in jiffies using the generic definitions.
- */
-
-#ifndef __IA64_CPUTIME_H
-#define __IA64_CPUTIME_H
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#include <asm-generic/cputime.h>
-#else
-
-#include <linux/time.h>
-#include <linux/jiffies.h>
-#include <asm/processor.h>
-
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
-
-#define cputime_zero			((cputime_t)0)
-#define cputime_max			((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b)		((__a) +  (__b))
-#define cputime_sub(__a, __b)		((__a) -  (__b))
-#define cputime_div(__a, __n)		((__a) /  (__n))
-#define cputime_halve(__a)		((__a) >> 1)
-#define cputime_eq(__a, __b)		((__a) == (__b))
-#define cputime_gt(__a, __b)		((__a) >  (__b))
-#define cputime_ge(__a, __b)		((__a) >= (__b))
-#define cputime_lt(__a, __b)		((__a) <  (__b))
-#define cputime_le(__a, __b)		((__a) <= (__b))
-
-#define cputime64_zero			((cputime64_t)0)
-#define cputime64_add(__a, __b)		((__a) + (__b))
-#define cputime64_sub(__a, __b)		((__a) - (__b))
-#define cputime_to_cputime64(__ct)	(__ct)
-
-/*
- * Convert cputime <-> jiffies (HZ)
- */
-#define cputime_to_jiffies(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies_to_cputime(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
-#define cputime64_to_jiffies64(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
-#define jiffies64_to_cputime64(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
-
-/*
- * Convert cputime <-> milliseconds
- */
-#define cputime_to_msecs(__ct)		((__ct) / NSEC_PER_MSEC)
-#define msecs_to_cputime(__msecs)	((__msecs) * NSEC_PER_MSEC)
-
-/*
- * Convert cputime <-> seconds
- */
-#define cputime_to_secs(__ct)		((__ct) / NSEC_PER_SEC)
-#define secs_to_cputime(__secs)		((__secs) * NSEC_PER_SEC)
-
-/*
- * Convert cputime <-> timespec (nsec)
- */
-static inline cputime_t timespec_to_cputime(const struct timespec *val)
-{
-	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
-	return (ret + val->tv_nsec);
-}
-static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
-{
-	val->tv_sec  = ct / NSEC_PER_SEC;
-	val->tv_nsec = ct % NSEC_PER_SEC;
-}
-
-/*
- * Convert cputime <-> timeval (msec)
- */
-static inline cputime_t timeval_to_cputime(struct timeval *val)
-{
-	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
-	return (ret + val->tv_usec * NSEC_PER_USEC);
-}
-static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
-{
-	val->tv_sec = ct / NSEC_PER_SEC;
-	val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
-}
-
-/*
- * Convert cputime <-> clock (USER_HZ)
- */
-#define cputime_to_clock_t(__ct)	((__ct) / (NSEC_PER_SEC / USER_HZ))
-#define clock_t_to_cputime(__x)		((__x) * (NSEC_PER_SEC / USER_HZ))
-
-/*
- * Convert cputime64 to clock.
- */
-#define cputime64_to_clock_t(__ct)      cputime_to_clock_t((cputime_t)__ct)
-
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
-#endif /* __IA64_CPUTIME_H */
diff --git a/include/asm-ia64/current.h b/include/asm-ia64/current.h
deleted file mode 100644
index c659f90fbfd9..000000000000
--- a/include/asm-ia64/current.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_IA64_CURRENT_H
-#define _ASM_IA64_CURRENT_H
-
-/*
- * Modified 1998-2000
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/intrinsics.h>
-
-/*
- * In kernel mode, thread pointer (r13) is used to point to the current task
- * structure.
- */
-#define current	((struct task_struct *) ia64_getreg(_IA64_REG_TP))
-
-#endif /* _ASM_IA64_CURRENT_H */
diff --git a/include/asm-ia64/cyclone.h b/include/asm-ia64/cyclone.h
deleted file mode 100644
index 88f6500e84ab..000000000000
--- a/include/asm-ia64/cyclone.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASM_IA64_CYCLONE_H
-#define ASM_IA64_CYCLONE_H
-
-#ifdef	CONFIG_IA64_CYCLONE
-extern int use_cyclone;
-extern void __init cyclone_setup(void);
-#else	/* CONFIG_IA64_CYCLONE */
-#define use_cyclone 0
-static inline void cyclone_setup(void)
-{
-	printk(KERN_ERR "Cyclone Counter: System not configured"
-					" w/ CONFIG_IA64_CYCLONE.\n");
-}
-#endif	/* CONFIG_IA64_CYCLONE */
-#endif	/* !ASM_IA64_CYCLONE_H */
diff --git a/include/asm-ia64/delay.h b/include/asm-ia64/delay.h
deleted file mode 100644
index a30a62f235e1..000000000000
--- a/include/asm-ia64/delay.h
+++ /dev/null
@@ -1,88 +0,0 @@
-#ifndef _ASM_IA64_DELAY_H
-#define _ASM_IA64_DELAY_H
-
-/*
- * Delay routines using a pre-computed "cycles/usec" value.
- *
- * Copyright (C) 1998, 1999 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 VA Linux Systems
- * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/compiler.h>
-
-#include <asm/intrinsics.h>
-#include <asm/processor.h>
-
-static __inline__ void
-ia64_set_itm (unsigned long val)
-{
-	ia64_setreg(_IA64_REG_CR_ITM, val);
-	ia64_srlz_d();
-}
-
-static __inline__ unsigned long
-ia64_get_itm (void)
-{
-	unsigned long result;
-
-	result = ia64_getreg(_IA64_REG_CR_ITM);
-	ia64_srlz_d();
-	return result;
-}
-
-static __inline__ void
-ia64_set_itv (unsigned long val)
-{
-	ia64_setreg(_IA64_REG_CR_ITV, val);
-	ia64_srlz_d();
-}
-
-static __inline__ unsigned long
-ia64_get_itv (void)
-{
-	return ia64_getreg(_IA64_REG_CR_ITV);
-}
-
-static __inline__ void
-ia64_set_itc (unsigned long val)
-{
-	ia64_setreg(_IA64_REG_AR_ITC, val);
-	ia64_srlz_d();
-}
-
-static __inline__ unsigned long
-ia64_get_itc (void)
-{
-	unsigned long result;
-
-	result = ia64_getreg(_IA64_REG_AR_ITC);
-	ia64_barrier();
-#ifdef CONFIG_ITANIUM
-	while (unlikely((__s32) result == -1)) {
-		result = ia64_getreg(_IA64_REG_AR_ITC);
-		ia64_barrier();
-	}
-#endif
-	return result;
-}
-
-extern void ia64_delay_loop (unsigned long loops);
-
-static __inline__ void
-__delay (unsigned long loops)
-{
-	if (unlikely(loops < 1))
-		return;
-
-	ia64_delay_loop (loops - 1);
-}
-
-extern void udelay (unsigned long usecs);
-
-#endif /* _ASM_IA64_DELAY_H */
diff --git a/include/asm-ia64/device.h b/include/asm-ia64/device.h
deleted file mode 100644
index 3db6daf7f251..000000000000
--- a/include/asm-ia64/device.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#ifndef _ASM_IA64_DEVICE_H
-#define _ASM_IA64_DEVICE_H
-
-struct dev_archdata {
-#ifdef CONFIG_ACPI
-	void	*acpi_handle;
-#endif
-};
-
-#endif /* _ASM_IA64_DEVICE_H */
diff --git a/include/asm-ia64/div64.h b/include/asm-ia64/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-ia64/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-ia64/dma-mapping.h b/include/asm-ia64/dma-mapping.h
deleted file mode 100644
index 9f0df9bd46b7..000000000000
--- a/include/asm-ia64/dma-mapping.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _ASM_IA64_DMA_MAPPING_H
-#define _ASM_IA64_DMA_MAPPING_H
-
-/*
- * Copyright (C) 2003-2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-#include <asm/machvec.h>
-#include <linux/scatterlist.h>
-
-#define dma_alloc_coherent	platform_dma_alloc_coherent
-/* coherent mem. is cheap */
-static inline void *
-dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		      gfp_t flag)
-{
-	return dma_alloc_coherent(dev, size, dma_handle, flag);
-}
-#define dma_free_coherent	platform_dma_free_coherent
-static inline void
-dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
-		     dma_addr_t dma_handle)
-{
-	dma_free_coherent(dev, size, cpu_addr, dma_handle);
-}
-#define dma_map_single_attrs	platform_dma_map_single_attrs
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size, int dir)
-{
-	return dma_map_single_attrs(dev, cpu_addr, size, dir, NULL);
-}
-#define dma_map_sg_attrs	platform_dma_map_sg_attrs
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sgl,
-			     int nents, int dir)
-{
-	return dma_map_sg_attrs(dev, sgl, nents, dir, NULL);
-}
-#define dma_unmap_single_attrs	platform_dma_unmap_single_attrs
-static inline void dma_unmap_single(struct device *dev, dma_addr_t cpu_addr,
-				    size_t size, int dir)
-{
-	return dma_unmap_single_attrs(dev, cpu_addr, size, dir, NULL);
-}
-#define dma_unmap_sg_attrs	platform_dma_unmap_sg_attrs
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sgl,
-				int nents, int dir)
-{
-	return dma_unmap_sg_attrs(dev, sgl, nents, dir, NULL);
-}
-#define dma_sync_single_for_cpu	platform_dma_sync_single_for_cpu
-#define dma_sync_sg_for_cpu	platform_dma_sync_sg_for_cpu
-#define dma_sync_single_for_device platform_dma_sync_single_for_device
-#define dma_sync_sg_for_device	platform_dma_sync_sg_for_device
-#define dma_mapping_error	platform_dma_mapping_error
-
-#define dma_map_page(dev, pg, off, size, dir)				\
-	dma_map_single(dev, page_address(pg) + (off), (size), (dir))
-#define dma_unmap_page(dev, dma_addr, size, dir)			\
-	dma_unmap_single(dev, dma_addr, size, dir)
-
-/*
- * Rest of this file is part of the "Advanced DMA API".  Use at your own risk.
- * See Documentation/DMA-API.txt for details.
- */
-
-#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir)	\
-	dma_sync_single_for_cpu(dev, dma_handle, size, dir)
-#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir)	\
-	dma_sync_single_for_device(dev, dma_handle, size, dir)
-
-#define dma_supported		platform_dma_supported
-
-static inline int
-dma_set_mask (struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-	*dev->dma_mask = mask;
-	return 0;
-}
-
-extern int dma_get_cache_alignment(void);
-
-static inline void
-dma_cache_sync (struct device *dev, void *vaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	/*
-	 * IA-64 is cache-coherent, so this is mostly a no-op.  However, we do need to
-	 * ensure that dma_cache_sync() enforces order, hence the mb().
-	 */
-	mb();
-}
-
-#define dma_is_consistent(d, h)	(1)	/* all we do is coherent memory... */
-
-#endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/include/asm-ia64/dma.h b/include/asm-ia64/dma.h
deleted file mode 100644
index 4d97f60f1ef5..000000000000
--- a/include/asm-ia64/dma.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_IA64_DMA_H
-#define _ASM_IA64_DMA_H
-
-/*
- * Copyright (C) 1998-2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-
-#include <asm/io.h>		/* need byte IO */
-
-extern unsigned long MAX_DMA_ADDRESS;
-
-#ifdef CONFIG_PCI
-  extern int isa_dma_bridge_buggy;
-#else
-# define isa_dma_bridge_buggy 	(0)
-#endif
-
-#define free_dma(x)
-
-void dma_mark_clean(void *addr, size_t size);
-
-#endif /* _ASM_IA64_DMA_H */
diff --git a/include/asm-ia64/dmi.h b/include/asm-ia64/dmi.h
deleted file mode 100644
index 00eb1b130b63..000000000000
--- a/include/asm-ia64/dmi.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_DMI_H
-#define _ASM_DMI_H 1
-
-#include <asm/io.h>
-
-/* Use normal IO mappings for DMI */
-#define dmi_ioremap ioremap
-#define dmi_iounmap(x,l) iounmap(x)
-#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
-
-#endif
diff --git a/include/asm-ia64/elf.h b/include/asm-ia64/elf.h
deleted file mode 100644
index 5e0c1a6bce8d..000000000000
--- a/include/asm-ia64/elf.h
+++ /dev/null
@@ -1,269 +0,0 @@
-#ifndef _ASM_IA64_ELF_H
-#define _ASM_IA64_ELF_H
-
-/*
- * ELF-specific definitions.
- *
- * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-
-#include <asm/fpu.h>
-#include <asm/page.h>
-#include <asm/auxvec.h>
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_IA_64)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS64
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_IA_64
-
-#define USE_ELF_CORE_DUMP
-#define CORE_DUMP_USE_REGSET
-
-/* Least-significant four bits of ELF header's e_flags are OS-specific.  The bits are
-   interpreted as follows by Linux: */
-#define EF_IA_64_LINUX_EXECUTABLE_STACK	0x1	/* is stack (& heap) executable by default? */
-
-#define ELF_EXEC_PAGESIZE	PAGE_SIZE
-
-/*
- * This is the location that an ET_DYN program is loaded if exec'ed.
- * Typical use of this is to invoke "./ld.so someprog" to test out a
- * new version of the loader.  We need to make sure that it is out of
- * the way of the program that it will "exec", and that there is
- * sufficient room for the brk.
- */
-#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x800000000UL)
-
-#define PT_IA_64_UNWIND		0x70000001
-
-/* IA-64 relocations: */
-#define R_IA64_NONE		0x00	/* none */
-#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
-#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
-#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
-#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
-#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
-#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
-#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
-#define R_IA64_GPREL22		0x2a	/* @gprel(sym+add), add imm22 */
-#define R_IA64_GPREL64I		0x2b	/* @gprel(sym+add), mov imm64 */
-#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym+add), data4 MSB */
-#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym+add), data4 LSB */
-#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym+add), data8 MSB */
-#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym+add), data8 LSB */
-#define R_IA64_LTOFF22		0x32	/* @ltoff(sym+add), add imm22 */
-#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym+add), mov imm64 */
-#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym+add), add imm22 */
-#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym+add), mov imm64 */
-#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym+add), data8 MSB */
-#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym+add), data8 LSB */
-#define R_IA64_FPTR64I		0x43	/* @fptr(sym+add), mov imm64 */
-#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym+add), data4 MSB */
-#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym+add), data4 LSB */
-#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym+add), data8 MSB */
-#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym+add), data8 LSB */
-#define R_IA64_PCREL60B		0x48	/* @pcrel(sym+add), brl */
-#define R_IA64_PCREL21B		0x49	/* @pcrel(sym+add), ptb, call */
-#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym+add), chk.s */
-#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym+add), fchkf */
-#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym+add), data4 MSB */
-#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym+add), data4 LSB */
-#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym+add), data8 MSB */
-#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym+add), data8 LSB */
-#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
-#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
-#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), 4 MSB */
-#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), 4 LSB */
-#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), 8 MSB */
-#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), 8 LSB */
-#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym+add), data4 MSB */
-#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym+add), data4 LSB */
-#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym+add), data8 MSB */
-#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym+add), data8 LSB */
-#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym+add), data4 MSB */
-#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym+add), data4 LSB */
-#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym+add), data8 MSB */
-#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym+add), data8 LSB */
-#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
-#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
-#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
-#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
-#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
-#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
-#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
-#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
-#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym+add), ptb, call */
-#define R_IA64_PCREL22		0x7a	/* @pcrel(sym+add), imm22 */
-#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym+add), imm64 */
-#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
-#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
-#define R_IA64_COPY		0x84	/* dynamic reloc, data copy */
-#define R_IA64_SUB		0x85	/* -symbol + addend, add imm22 */
-#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
-#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
-#define R_IA64_TPREL14		0x91	/* @tprel(sym+add), add imm14 */
-#define R_IA64_TPREL22		0x92	/* @tprel(sym+add), add imm22 */
-#define R_IA64_TPREL64I		0x93	/* @tprel(sym+add), add imm64 */
-#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym+add), data8 MSB */
-#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym+add), data8 LSB */
-#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), add imm22 */
-#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym+add), data8 MSB */
-#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym+add), data8 LSB */
-#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(s+a)), imm22 */
-#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym+add), imm14 */
-#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym+add), imm22 */
-#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym+add), imm64 */
-#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym+add), data4 MSB */
-#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym+add), data4 LSB */
-#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym+add), data8 MSB */
-#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym+add), data8 LSB */
-#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
-
-/* IA-64 specific section flags: */
-#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
-
-/*
- * We use (abuse?) this macro to insert the (empty) vm_area that is
- * used to map the register backing store.  I don't see any better
- * place to do this, but we should discuss this with Linus once we can
- * talk to him...
- */
-extern void ia64_init_addr_space (void);
-#define ELF_PLAT_INIT(_r, load_addr)	ia64_init_addr_space()
-
-/* ELF register definitions.  This is needed for core dump support.  */
-
-/*
- * elf_gregset_t contains the application-level state in the following order:
- *	r0-r31
- *	NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
- *	predicate registers (p0-p63)
- *	b0-b7
- *	ip cfm psr
- *	ar.rsc ar.bsp ar.bspstore ar.rnat
- *	ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
- */
-#define ELF_NGREG	128	/* we really need just 72 but let's leave some headroom... */
-#define ELF_NFPREG	128	/* f0 and f1 could be omitted, but so what... */
-
-/* elf_gregset_t register offsets */
-#define ELF_GR_0_OFFSET     0
-#define ELF_NAT_OFFSET     (32 * sizeof(elf_greg_t))
-#define ELF_PR_OFFSET      (33 * sizeof(elf_greg_t))
-#define ELF_BR_0_OFFSET    (34 * sizeof(elf_greg_t))
-#define ELF_CR_IIP_OFFSET  (42 * sizeof(elf_greg_t))
-#define ELF_CFM_OFFSET     (43 * sizeof(elf_greg_t))
-#define ELF_CR_IPSR_OFFSET (44 * sizeof(elf_greg_t))
-#define ELF_GR_OFFSET(i)   (ELF_GR_0_OFFSET + i * sizeof(elf_greg_t))
-#define ELF_BR_OFFSET(i)   (ELF_BR_0_OFFSET + i * sizeof(elf_greg_t))
-#define ELF_AR_RSC_OFFSET  (45 * sizeof(elf_greg_t))
-#define ELF_AR_BSP_OFFSET  (46 * sizeof(elf_greg_t))
-#define ELF_AR_BSPSTORE_OFFSET (47 * sizeof(elf_greg_t))
-#define ELF_AR_RNAT_OFFSET (48 * sizeof(elf_greg_t))
-#define ELF_AR_CCV_OFFSET  (49 * sizeof(elf_greg_t))
-#define ELF_AR_UNAT_OFFSET (50 * sizeof(elf_greg_t))
-#define ELF_AR_FPSR_OFFSET (51 * sizeof(elf_greg_t))
-#define ELF_AR_PFS_OFFSET  (52 * sizeof(elf_greg_t))
-#define ELF_AR_LC_OFFSET   (53 * sizeof(elf_greg_t))
-#define ELF_AR_EC_OFFSET   (54 * sizeof(elf_greg_t))
-#define ELF_AR_CSD_OFFSET  (55 * sizeof(elf_greg_t))
-#define ELF_AR_SSD_OFFSET  (56 * sizeof(elf_greg_t))
-#define ELF_AR_END_OFFSET  (57 * sizeof(elf_greg_t))
-
-typedef unsigned long elf_fpxregset_t;
-
-typedef unsigned long elf_greg_t;
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct ia64_fpreg elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-
-
-
-struct pt_regs;	/* forward declaration... */
-extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
-#define ELF_CORE_COPY_REGS(_dest,_regs)	ia64_elf_core_copy_regs(_regs, _dest);
-
-/* This macro yields a bitmask that programs can use to figure out
-   what instruction set this CPU supports.  */
-#define ELF_HWCAP 	0
-
-/* This macro yields a string that ld.so will use to load
-   implementation specific libraries for optimization.  Not terribly
-   relevant until we have real hardware to play with... */
-#define ELF_PLATFORM	NULL
-
-#define SET_PERSONALITY(ex, ibcs2)	set_personality(PER_LINUX)
-#define elf_read_implies_exec(ex, executable_stack)					\
-	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
-
-struct task_struct;
-
-#define GATE_EHDR	((const struct elfhdr *) GATE_ADDR)
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO								\
-do {										\
-	extern char __kernel_syscall_via_epc[];					\
-	NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc);	\
-	NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR);		\
-} while (0)
-
-
-/*
- * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
- * extra segments containing the gate DSO contents.  Dumping its
- * contents makes post-mortem fully interpretable later without matching up
- * the same kernel and hardware config to see what PC values meant.
- * Dumping its extra ELF program headers includes all the other information
- * a debugger needs to easily find how the gate DSO was being used.
- */
-#define ELF_CORE_EXTRA_PHDRS		(GATE_EHDR->e_phnum)
-#define ELF_CORE_WRITE_EXTRA_PHDRS						\
-do {										\
-	const struct elf_phdr *const gate_phdrs =			      \
-		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
-	int i;									\
-	Elf64_Off ofs = 0;						      \
-	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {				\
-		struct elf_phdr phdr = gate_phdrs[i];			      \
-		if (phdr.p_type == PT_LOAD) {					\
-			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
-			phdr.p_filesz = phdr.p_memsz;			      \
-			if (ofs == 0) {					      \
-				ofs = phdr.p_offset = offset;		      \
-			offset += phdr.p_filesz;				\
-		}							      \
-		else							      \
-				phdr.p_offset = ofs;			      \
-		}							      \
-		else							      \
-			phdr.p_offset += ofs;					\
-		phdr.p_paddr = 0; /* match other core phdrs */			\
-		DUMP_WRITE(&phdr, sizeof(phdr));				\
-	}									\
-} while (0)
-#define ELF_CORE_WRITE_EXTRA_DATA					\
-do {									\
-	const struct elf_phdr *const gate_phdrs =			      \
-		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
-	int i;								\
-	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {			\
-		if (gate_phdrs[i].p_type == PT_LOAD) {			      \
-			DUMP_WRITE((void *) gate_phdrs[i].p_vaddr,	      \
-				   PAGE_ALIGN(gate_phdrs[i].p_memsz));	      \
-			break;						      \
-		}							      \
-	}								\
-} while (0)
-
-#endif /* _ASM_IA64_ELF_H */
diff --git a/include/asm-ia64/emergency-restart.h b/include/asm-ia64/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-ia64/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-ia64/errno.h b/include/asm-ia64/errno.h
deleted file mode 100644
index 4c82b503d92f..000000000000
--- a/include/asm-ia64/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/errno.h>
diff --git a/include/asm-ia64/esi.h b/include/asm-ia64/esi.h
deleted file mode 100644
index 40991c6ba647..000000000000
--- a/include/asm-ia64/esi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * ESI service calls.
- *
- * Copyright (c) Copyright 2005-2006 Hewlett-Packard Development Company, L.P.
- * 	Alex Williamson <alex.williamson@hp.com>
- */
-#ifndef esi_h
-#define esi_h
-
-#include <linux/efi.h>
-
-#define ESI_QUERY			0x00000001
-#define ESI_OPEN_HANDLE			0x02000000
-#define ESI_CLOSE_HANDLE		0x02000001
-
-enum esi_proc_type {
-	ESI_PROC_SERIALIZED,	/* calls need to be serialized */
-	ESI_PROC_MP_SAFE,	/* MP-safe, but not reentrant */
-	ESI_PROC_REENTRANT	/* MP-safe and reentrant */
-};
-
-extern struct ia64_sal_retval esi_call_phys (void *, u64 *);
-extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *,
-			 enum esi_proc_type,
-			 u64, u64, u64, u64, u64, u64, u64, u64);
-extern int ia64_esi_call_phys(efi_guid_t, struct ia64_sal_retval *, u64, u64,
-                              u64, u64, u64, u64, u64, u64);
-
-#endif /* esi_h */
diff --git a/include/asm-ia64/fb.h b/include/asm-ia64/fb.h
deleted file mode 100644
index 89a397cee90a..000000000000
--- a/include/asm-ia64/fb.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <linux/efi.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
-		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	else
-		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-ia64/fcntl.h b/include/asm-ia64/fcntl.h
deleted file mode 100644
index 1dd275dc8f65..000000000000
--- a/include/asm-ia64/fcntl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASM_IA64_FCNTL_H
-#define _ASM_IA64_FCNTL_H
-/*
- * Modified 1998-2000
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
- */
-
-#define force_o_largefile()	\
-		(personality(current->personality) != PER_LINUX32)
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _ASM_IA64_FCNTL_H */
diff --git a/include/asm-ia64/fpswa.h b/include/asm-ia64/fpswa.h
deleted file mode 100644
index 62edfceadaa6..000000000000
--- a/include/asm-ia64/fpswa.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _ASM_IA64_FPSWA_H
-#define _ASM_IA64_FPSWA_H
-
-/*
- * Floating-point Software Assist
- *
- * Copyright (C) 1999 Intel Corporation.
- * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 1999 Goutham Rao <goutham.rao@intel.com>
- */
-
-typedef struct {
-	/* 4 * 128 bits */
-	unsigned long fp_lp[4*2];
-} fp_state_low_preserved_t;
-
-typedef struct {
-	/* 10 * 128 bits */
-	unsigned long fp_lv[10 * 2];
-} fp_state_low_volatile_t;
-
-typedef	struct {
-	/* 16 * 128 bits */
-	unsigned long fp_hp[16 * 2];
-} fp_state_high_preserved_t;
-
-typedef struct {
-	/* 96 * 128 bits */
-	unsigned long fp_hv[96 * 2];
-} fp_state_high_volatile_t;
-
-/**
- * floating point state to be passed to the FP emulation library by
- * the trap/fault handler
- */
-typedef struct {
-	unsigned long			bitmask_low64;
-	unsigned long			bitmask_high64;
-	fp_state_low_preserved_t	*fp_state_low_preserved;
-	fp_state_low_volatile_t		*fp_state_low_volatile;
-	fp_state_high_preserved_t	*fp_state_high_preserved;
-	fp_state_high_volatile_t	*fp_state_high_volatile;
-} fp_state_t;
-
-typedef struct {
-	unsigned long status;
-	unsigned long err0;
-	unsigned long err1;
-	unsigned long err2;
-} fpswa_ret_t;
-
-/**
- * function header for the Floating Point software assist
- * library. This function is invoked by the Floating point software
- * assist trap/fault handler.
- */
-typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr,
-				    unsigned long *fsr, unsigned long *isr, unsigned long *preds,
-				    unsigned long *ifs, fp_state_t *fp_state);
-
-/**
- * This is the FPSWA library interface as defined by EFI.  We need to pass a 
- * pointer to the interface itself on a call to the assist library
- */
-typedef struct {
-	unsigned int	 revision;
-	unsigned int	 reserved;
-	efi_fpswa_t	 fpswa;
-} fpswa_interface_t;
-
-extern fpswa_interface_t *fpswa_interface;
-
-#endif /* _ASM_IA64_FPSWA_H */
diff --git a/include/asm-ia64/fpu.h b/include/asm-ia64/fpu.h
deleted file mode 100644
index 3859558ff0a4..000000000000
--- a/include/asm-ia64/fpu.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _ASM_IA64_FPU_H
-#define _ASM_IA64_FPU_H
-
-/*
- * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <asm/types.h>
-
-/* floating point status register: */
-#define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
-#define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
-#define FPSR_TRAP_ZD	(1 << 2)	/* zero-divide trap disabled */
-#define FPSR_TRAP_OD	(1 << 3)	/* overflow trap disabled */
-#define FPSR_TRAP_UD	(1 << 4)	/* underflow trap disabled */
-#define FPSR_TRAP_ID	(1 << 5)	/* inexact trap disabled */
-#define FPSR_S0(x)	((x) <<  6)
-#define FPSR_S1(x)	((x) << 19)
-#define FPSR_S2(x)	(__IA64_UL(x) << 32)
-#define FPSR_S3(x)	(__IA64_UL(x) << 45)
-
-/* floating-point status field controls: */
-#define FPSF_FTZ	(1 << 0)		/* flush-to-zero */
-#define FPSF_WRE	(1 << 1)		/* widest-range exponent */
-#define FPSF_PC(x)	(((x) & 0x3) << 2)	/* precision control */
-#define FPSF_RC(x)	(((x) & 0x3) << 4)	/* rounding control */
-#define FPSF_TD		(1 << 6)		/* trap disabled */
-
-/* floating-point status field flags: */
-#define FPSF_V		(1 <<  7)		/* invalid operation flag */
-#define FPSF_D		(1 <<  8)		/* denormal/unnormal operand flag */
-#define FPSF_Z		(1 <<  9)		/* zero divide (IEEE) flag */
-#define FPSF_O		(1 << 10)		/* overflow (IEEE) flag */
-#define FPSF_U		(1 << 11)		/* underflow (IEEE) flag */
-#define FPSF_I		(1 << 12)		/* inexact (IEEE) flag) */
-
-/* floating-point rounding control: */
-#define FPRC_NEAREST	0x0
-#define FPRC_NEGINF	0x1
-#define FPRC_POSINF	0x2
-#define FPRC_TRUNC	0x3
-
-#define FPSF_DEFAULT	(FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST))
-
-/* This default value is the same as HP-UX uses.  Don't change it
-   without a very good reason.  */
-#define FPSR_DEFAULT	(FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD	\
-			 | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID	\
-			 | FPSR_S0 (FPSF_DEFAULT)			\
-			 | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE)	\
-			 | FPSR_S2 (FPSF_DEFAULT | FPSF_TD)		\
-			 | FPSR_S3 (FPSF_DEFAULT | FPSF_TD))
-
-# ifndef __ASSEMBLY__
-
-struct ia64_fpreg {
-	union {
-		unsigned long bits[2];
-		long double __dummy;	/* force 16-byte alignment */
-	} u;
-};
-
-# endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_IA64_FPU_H */
diff --git a/include/asm-ia64/futex.h b/include/asm-ia64/futex.h
deleted file mode 100644
index c7f0f062239c..000000000000
--- a/include/asm-ia64/futex.h
+++ /dev/null
@@ -1,124 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-#include <asm/system.h>
-
-#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
-do {									\
-	register unsigned long r8 __asm ("r8") = 0;			\
-	__asm__ __volatile__(						\
-		"	mf;;					\n"	\
-		"[1:] "	insn ";;				\n"	\
-		"	.xdata4 \"__ex_table\", 1b-., 2f-.	\n"	\
-		"[2:]"							\
-		: "+r" (r8), "=r" (oldval)				\
-		: "r" (uaddr), "r" (oparg)				\
-		: "memory");						\
-	ret = r8;							\
-} while (0)
-
-#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \
-do {									\
-	register unsigned long r8 __asm ("r8") = 0;			\
-	int val, newval;						\
-	do {								\
-		__asm__ __volatile__(					\
-			"	mf;;				  \n"	\
-			"[1:]	ld4 %3=[%4];;			  \n"	\
-			"	mov %2=%3			  \n"	\
-				insn	";;			  \n"	\
-			"	mov ar.ccv=%2;;			  \n"	\
-			"[2:]	cmpxchg4.acq %1=[%4],%3,ar.ccv;;  \n"	\
-			"	.xdata4 \"__ex_table\", 1b-., 3f-.\n"	\
-			"	.xdata4 \"__ex_table\", 2b-., 3f-.\n"	\
-			"[3:]"						\
-			: "+r" (r8), "=r" (val), "=&r" (oldval),	\
-			   "=&r" (newval)				\
-			: "r" (uaddr), "r" (oparg)			\
-			: "memory");					\
-		if (unlikely (r8))					\
-			break;						\
-	} while (unlikely (val != oldval));				\
-	ret = r8;							\
-} while (0)
-
-static inline int
-futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op1("xchg4 %1=[%2],%3", ret, oldval, uaddr,
-				   oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op2("add %3=%3,%5", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op2("or %3=%3,%5", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op2("and %3=%3,%5", ret, oldval, uaddr,
-				   ~oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op2("xor %3=%3,%5", ret, oldval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	{
-		register unsigned long r8 __asm ("r8");
-		__asm__ __volatile__(
-			"	mf;;					\n"
-			"	mov ar.ccv=%3;;				\n"
-			"[1:]	cmpxchg4.acq %0=[%1],%2,ar.ccv		\n"
-			"	.xdata4 \"__ex_table\", 1b-., 2f-.	\n"
-			"[2:]"
-			: "=r" (r8)
-			: "r" (uaddr), "r" (newval),
-			  "rO" ((long) (unsigned) oldval)
-			: "memory");
-		return r8;
-	}
-}
-
-#endif /* _ASM_FUTEX_H */
diff --git a/include/asm-ia64/gcc_intrin.h b/include/asm-ia64/gcc_intrin.h
deleted file mode 100644
index 2fe292c275fe..000000000000
--- a/include/asm-ia64/gcc_intrin.h
+++ /dev/null
@@ -1,620 +0,0 @@
-#ifndef _ASM_IA64_GCC_INTRIN_H
-#define _ASM_IA64_GCC_INTRIN_H
-/*
- *
- * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
- * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
- */
-
-#include <linux/compiler.h>
-
-/* define this macro to get some asm stmts included in 'c' files */
-#define ASM_SUPPORTED
-
-/* Optimization barrier */
-/* The "volatile" is due to gcc bugs */
-#define ia64_barrier()	asm volatile ("":::"memory")
-
-#define ia64_stop()	asm volatile (";;"::)
-
-#define ia64_invala_gr(regnum)	asm volatile ("invala.e r%0" :: "i"(regnum))
-
-#define ia64_invala_fr(regnum)	asm volatile ("invala.e f%0" :: "i"(regnum))
-
-#define ia64_flushrs() asm volatile ("flushrs;;":::"memory")
-
-#define ia64_loadrs() asm volatile ("loadrs;;":::"memory")
-
-extern void ia64_bad_param_for_setreg (void);
-extern void ia64_bad_param_for_getreg (void);
-
-#ifdef __KERNEL__
-register unsigned long ia64_r13 asm ("r13") __used;
-#endif
-
-#define ia64_setreg(regnum, val)						\
-({										\
-	switch (regnum) {							\
-	    case _IA64_REG_PSR_L:						\
-		    asm volatile ("mov psr.l=%0" :: "r"(val) : "memory");	\
-		    break;							\
-	    case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
-		    asm volatile ("mov ar%0=%1" ::				\
-		    			  "i" (regnum - _IA64_REG_AR_KR0),	\
-					  "r"(val): "memory");			\
-		    break;							\
-	    case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:			\
-		    asm volatile ("mov cr%0=%1" ::				\
-				          "i" (regnum - _IA64_REG_CR_DCR),	\
-					  "r"(val): "memory" );			\
-		    break;							\
-	    case _IA64_REG_SP:							\
-		    asm volatile ("mov r12=%0" ::				\
-			    		  "r"(val): "memory");			\
-		    break;							\
-	    case _IA64_REG_GP:							\
-		    asm volatile ("mov gp=%0" :: "r"(val) : "memory");		\
-		break;								\
-	    default:								\
-		    ia64_bad_param_for_setreg();				\
-		    break;							\
-	}									\
-})
-
-#define ia64_getreg(regnum)							\
-({										\
-	__u64 ia64_intri_res;							\
-										\
-	switch (regnum) {							\
-	case _IA64_REG_GP:							\
-		asm volatile ("mov %0=gp" : "=r"(ia64_intri_res));		\
-		break;								\
-	case _IA64_REG_IP:							\
-		asm volatile ("mov %0=ip" : "=r"(ia64_intri_res));		\
-		break;								\
-	case _IA64_REG_PSR:							\
-		asm volatile ("mov %0=psr" : "=r"(ia64_intri_res));		\
-		break;								\
-	case _IA64_REG_TP:	/* for current() */				\
-		ia64_intri_res = ia64_r13;					\
-		break;								\
-	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
-		asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res)		\
-				      : "i"(regnum - _IA64_REG_AR_KR0));	\
-		break;								\
-	case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:				\
-		asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res)		\
-				      : "i" (regnum - _IA64_REG_CR_DCR));	\
-		break;								\
-	case _IA64_REG_SP:							\
-		asm volatile ("mov %0=sp" : "=r" (ia64_intri_res));		\
-		break;								\
-	default:								\
-		ia64_bad_param_for_getreg();					\
-		break;								\
-	}									\
-	ia64_intri_res;								\
-})
-
-#define ia64_hint_pause 0
-
-#define ia64_hint(mode)						\
-({								\
-	switch (mode) {						\
-	case ia64_hint_pause:					\
-		asm volatile ("hint @pause" ::: "memory");	\
-		break;						\
-	}							\
-})
-
-
-/* Integer values for mux1 instruction */
-#define ia64_mux1_brcst 0
-#define ia64_mux1_mix   8
-#define ia64_mux1_shuf  9
-#define ia64_mux1_alt  10
-#define ia64_mux1_rev  11
-
-#define ia64_mux1(x, mode)							\
-({										\
-	__u64 ia64_intri_res;							\
-										\
-	switch (mode) {								\
-	case ia64_mux1_brcst:							\
-		asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_mix:							\
-		asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_shuf:							\
-		asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_alt:							\
-		asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_rev:							\
-		asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	}									\
-	ia64_intri_res;								\
-})
-
-#if __GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
-# define ia64_popcnt(x)		__builtin_popcountl(x)
-#else
-# define ia64_popcnt(x)						\
-  ({								\
-	__u64 ia64_intri_res;					\
-	asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x));	\
-								\
-	ia64_intri_res;						\
-  })
-#endif
-
-#define ia64_getf_exp(x)					\
-({								\
-	long ia64_intri_res;					\
-								\
-	asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x));	\
-								\
-	ia64_intri_res;						\
-})
-
-#define ia64_shrp(a, b, count)								\
-({											\
-	__u64 ia64_intri_res;								\
-	asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count));	\
-	ia64_intri_res;									\
-})
-
-#define ia64_ldfs(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldfd(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldfe(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldf8(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldf_fill(regnum, x)				\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_st4_rel_nta(m, val)					\
-({									\
-	asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val));	\
-})
-
-#define ia64_stfs(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stfd(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stfe(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stf8(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stf_spill(x, regnum)						\
-({										\
-	register double __f__ asm ("f"#regnum);					\
-	asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_fetchadd4_acq(p, inc)						\
-({										\
-										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd4.acq %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_fetchadd4_rel(p, inc)						\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd4.rel %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_fetchadd8_acq(p, inc)						\
-({										\
-										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd8.acq %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_fetchadd8_rel(p, inc)						\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd8.rel %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_xchg1(ptr,x)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("xchg1 %0=[%1],%2"					\
-		      : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory");	\
-	ia64_intri_res;								\
-})
-
-#define ia64_xchg2(ptr,x)						\
-({									\
-	__u64 ia64_intri_res;						\
-	asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res)	\
-		      : "r" (ptr), "r" (x) : "memory");			\
-	ia64_intri_res;							\
-})
-
-#define ia64_xchg4(ptr,x)						\
-({									\
-	__u64 ia64_intri_res;						\
-	asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res)	\
-		      : "r" (ptr), "r" (x) : "memory");			\
-	ia64_intri_res;							\
-})
-
-#define ia64_xchg8(ptr,x)						\
-({									\
-	__u64 ia64_intri_res;						\
-	asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res)	\
-		      : "r" (ptr), "r" (x) : "memory");			\
-	ia64_intri_res;							\
-})
-
-#define ia64_cmpxchg1_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg1_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg2_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg2_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-											\
-	asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg4_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg4_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg8_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg8_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-											\
-	asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_mf()	asm volatile ("mf" ::: "memory")
-#define ia64_mfa()	asm volatile ("mf.a" ::: "memory")
-
-#define ia64_invala() asm volatile ("invala" ::: "memory")
-
-#define ia64_thash(addr)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_srlz_i()	asm volatile (";; srlz.i ;;" ::: "memory")
-#define ia64_srlz_d()	asm volatile (";; srlz.d" ::: "memory");
-
-#ifdef HAVE_SERIALIZE_DIRECTIVE
-# define ia64_dv_serialize_data()		asm volatile (".serialize.data");
-# define ia64_dv_serialize_instruction()	asm volatile (".serialize.instruction");
-#else
-# define ia64_dv_serialize_data()
-# define ia64_dv_serialize_instruction()
-#endif
-
-#define ia64_nop(x)	asm volatile ("nop %0"::"i"(x));
-
-#define ia64_itci(addr)	asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
-
-#define ia64_itcd(addr)	asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
-
-
-#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1"				\
-					     :: "r"(trnum), "r"(addr) : "memory")
-
-#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1"				\
-					     :: "r"(trnum), "r"(addr) : "memory")
-
-#define ia64_tpa(addr)								\
-({										\
-	__u64 ia64_pa;								\
-	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
-	ia64_pa;								\
-})
-
-#define __ia64_set_dbr(index, val)						\
-	asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_ibr(index, val)						\
-	asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_pkr(index, val)						\
-	asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_pmc(index, val)						\
-	asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_pmd(index, val)						\
-	asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_rr(index, val)							\
-	asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
-
-#define ia64_get_cpuid(index)								\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
-	ia64_intri_res;									\
-})
-
-#define __ia64_get_dbr(index)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_get_ibr(index)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_get_pkr(index)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_get_pmc(index)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-
-#define ia64_get_pmd(index)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_get_rr(index)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_fc(addr)	asm volatile ("fc %0" :: "r"(addr) : "memory")
-
-
-#define ia64_sync_i()	asm volatile (";; sync.i" ::: "memory")
-
-#define ia64_ssm(mask)	asm volatile ("ssm %0":: "i"((mask)) : "memory")
-#define ia64_rsm(mask)	asm volatile ("rsm %0":: "i"((mask)) : "memory")
-#define ia64_sum(mask)	asm volatile ("sum %0":: "i"((mask)) : "memory")
-#define ia64_rum(mask)	asm volatile ("rum %0":: "i"((mask)) : "memory")
-
-#define ia64_ptce(addr)	asm volatile ("ptc.e %0" :: "r"(addr))
-
-#define ia64_ptcga(addr, size)							\
-do {										\
-	asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory");	\
-	ia64_dv_serialize_data();						\
-} while (0)
-
-#define ia64_ptcl(addr, size)							\
-do {										\
-	asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory");	\
-	ia64_dv_serialize_data();						\
-} while (0)
-
-#define ia64_ptri(addr, size)						\
-	asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
-
-#define ia64_ptrd(addr, size)						\
-	asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
-
-#define ia64_ttag(addr)							\
-({									  \
-	__u64 ia64_intri_res;						   \
-	asm volatile ("ttag %0=%1" : "=r"(ia64_intri_res) : "r" (addr));   \
-	ia64_intri_res;							 \
-})
-
-
-/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
-
-#define ia64_lfhint_none   0
-#define ia64_lfhint_nt1    1
-#define ia64_lfhint_nt2    2
-#define ia64_lfhint_nta    3
-
-#define ia64_lfetch(lfhint, y)					\
-({								\
-        switch (lfhint) {					\
-        case ia64_lfhint_none:					\
-                asm volatile ("lfetch [%0]" : : "r"(y));	\
-                break;						\
-        case ia64_lfhint_nt1:					\
-                asm volatile ("lfetch.nt1 [%0]" : : "r"(y));	\
-                break;						\
-        case ia64_lfhint_nt2:					\
-                asm volatile ("lfetch.nt2 [%0]" : : "r"(y));	\
-                break;						\
-        case ia64_lfhint_nta:					\
-                asm volatile ("lfetch.nta [%0]" : : "r"(y));	\
-                break;						\
-        }							\
-})
-
-#define ia64_lfetch_excl(lfhint, y)					\
-({									\
-        switch (lfhint) {						\
-        case ia64_lfhint_none:						\
-                asm volatile ("lfetch.excl [%0]" :: "r"(y));		\
-                break;							\
-        case ia64_lfhint_nt1:						\
-                asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt2:						\
-                asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nta:						\
-                asm volatile ("lfetch.excl.nta [%0]" :: "r"(y));	\
-                break;							\
-        }								\
-})
-
-#define ia64_lfetch_fault(lfhint, y)					\
-({									\
-        switch (lfhint) {						\
-        case ia64_lfhint_none:						\
-                asm volatile ("lfetch.fault [%0]" : : "r"(y));		\
-                break;							\
-        case ia64_lfhint_nt1:						\
-                asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt2:						\
-                asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y));	\
-                break;							\
-        case ia64_lfhint_nta:						\
-                asm volatile ("lfetch.fault.nta [%0]" : : "r"(y));	\
-                break;							\
-        }								\
-})
-
-#define ia64_lfetch_fault_excl(lfhint, y)				\
-({									\
-        switch (lfhint) {						\
-        case ia64_lfhint_none:						\
-                asm volatile ("lfetch.fault.excl [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt1:						\
-                asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt2:						\
-                asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nta:						\
-                asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y));	\
-                break;							\
-        }								\
-})
-
-#define ia64_intrin_local_irq_restore(x)			\
-do {								\
-	asm volatile (";;   cmp.ne p6,p7=%0,r0;;"		\
-		      "(p6) ssm psr.i;"				\
-		      "(p7) rsm psr.i;;"			\
-		      "(p6) srlz.d"				\
-		      :: "r"((x)) : "p6", "p7", "memory");	\
-} while (0)
-
-#endif /* _ASM_IA64_GCC_INTRIN_H */
diff --git a/include/asm-ia64/hardirq.h b/include/asm-ia64/hardirq.h
deleted file mode 100644
index 140e495b8e0e..000000000000
--- a/include/asm-ia64/hardirq.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _ASM_IA64_HARDIRQ_H
-#define _ASM_IA64_HARDIRQ_H
-
-/*
- * Modified 1998-2002, 2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-#include <asm/processor.h>
-
-/*
- * No irq_cpustat_t for IA-64.  The data is held in the per-CPU data structure.
- */
-
-#define __ARCH_IRQ_STAT	1
-
-#define local_softirq_pending()		(local_cpu_data->softirq_pending)
-
-#define HARDIRQ_BITS	14
-
-/*
- * The hardirq mask has to be large enough to have space for potentially all IRQ sources
- * in the system nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-extern void __iomem *ipi_base_addr;
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* _ASM_IA64_HARDIRQ_H */
diff --git a/include/asm-ia64/hpsim.h b/include/asm-ia64/hpsim.h
deleted file mode 100644
index 892ab198a9da..000000000000
--- a/include/asm-ia64/hpsim.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASMIA64_HPSIM_H
-#define _ASMIA64_HPSIM_H
-
-#ifndef CONFIG_HP_SIMSERIAL_CONSOLE
-static inline int simcons_register(void) { return 1; }
-#else
-int simcons_register(void);
-#endif
-
-struct tty_driver;
-extern struct tty_driver *hp_simserial_driver;
-
-void ia64_ssc_connect_irq(long intr, long irq);
-void ia64_ctl_trace(long on);
-
-#endif
diff --git a/include/asm-ia64/hugetlb.h b/include/asm-ia64/hugetlb.h
deleted file mode 100644
index f28a9701f1cf..000000000000
--- a/include/asm-ia64/hugetlb.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _ASM_IA64_HUGETLB_H
-#define _ASM_IA64_HUGETLB_H
-
-#include <asm/page.h>
-
-
-void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
-			    unsigned long end, unsigned long floor,
-			    unsigned long ceiling);
-
-int prepare_hugepage_range(unsigned long addr, unsigned long len);
-
-static inline int is_hugepage_only_range(struct mm_struct *mm,
-					 unsigned long addr,
-					 unsigned long len)
-{
-	return (REGION_NUMBER(addr) == RGN_HPAGE ||
-		REGION_NUMBER((addr)+(len)-1) == RGN_HPAGE);
-}
-
-static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
-{
-}
-
-static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-				   pte_t *ptep, pte_t pte)
-{
-	set_pte_at(mm, addr, ptep, pte);
-}
-
-static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
-{
-	return ptep_get_and_clear(mm, addr, ptep);
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long addr, pte_t *ptep)
-{
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
-	return pte_none(pte);
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
-	return pte_wrprotect(pte);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	ptep_set_wrprotect(mm, addr, ptep);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
-					     unsigned long addr, pte_t *ptep,
-					     pte_t pte, int dirty)
-{
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
-	return *ptep;
-}
-
-static inline int arch_prepare_hugepage(struct page *page)
-{
-	return 0;
-}
-
-static inline void arch_release_hugepage(struct page *page)
-{
-}
-
-#endif /* _ASM_IA64_HUGETLB_H */
diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h
deleted file mode 100644
index 76366dc9c1a0..000000000000
--- a/include/asm-ia64/hw_irq.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _ASM_IA64_HW_IRQ_H
-#define _ASM_IA64_HW_IRQ_H
-
-/*
- * Copyright (C) 2001-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/profile.h>
-
-#include <asm/machvec.h>
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-
-typedef u8 ia64_vector;
-
-/*
- * 0 special
- *
- * 1,3-14 are reserved from firmware
- *
- * 16-255 (vectored external interrupts) are available
- *
- * 15 spurious interrupt (see IVR)
- *
- * 16 lowest priority, 255 highest priority
- *
- * 15 classes of 16 interrupts each.
- */
-#define IA64_MIN_VECTORED_IRQ		 16
-#define IA64_MAX_VECTORED_IRQ		255
-#define IA64_NUM_VECTORS		256
-
-#define AUTO_ASSIGN			-1
-
-#define IA64_SPURIOUS_INT_VECTOR	0x0f
-
-/*
- * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
- */
-#define IA64_CPEP_VECTOR		0x1c	/* corrected platform error polling vector */
-#define IA64_CMCP_VECTOR		0x1d	/* corrected machine-check polling vector */
-#define IA64_CPE_VECTOR			0x1e	/* corrected platform error interrupt vector */
-#define IA64_CMC_VECTOR			0x1f	/* corrected machine-check interrupt vector */
-/*
- * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
- * Use vectors 0x30-0xe7 as the default device vector range for ia64.
- * Platforms may choose to reduce this range in platform_irq_setup, but the
- * platform range must fall within
- *	[IA64_DEF_FIRST_DEVICE_VECTOR..IA64_DEF_LAST_DEVICE_VECTOR]
- */
-extern int ia64_first_device_vector;
-extern int ia64_last_device_vector;
-
-#define IA64_DEF_FIRST_DEVICE_VECTOR	0x30
-#define IA64_DEF_LAST_DEVICE_VECTOR	0xe7
-#define IA64_FIRST_DEVICE_VECTOR	ia64_first_device_vector
-#define IA64_LAST_DEVICE_VECTOR		ia64_last_device_vector
-#define IA64_MAX_DEVICE_VECTORS		(IA64_DEF_LAST_DEVICE_VECTOR - IA64_DEF_FIRST_DEVICE_VECTOR + 1)
-#define IA64_NUM_DEVICE_VECTORS		(IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
-
-#define IA64_MCA_RENDEZ_VECTOR		0xe8	/* MCA rendez interrupt */
-#define IA64_PERFMON_VECTOR		0xee	/* performance monitor interrupt vector */
-#define IA64_TIMER_VECTOR		0xef	/* use highest-prio group 15 interrupt for timer */
-#define	IA64_MCA_WAKEUP_VECTOR		0xf0	/* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
-#define IA64_IPI_LOCAL_TLB_FLUSH	0xfc	/* SMP flush local TLB */
-#define IA64_IPI_RESCHEDULE		0xfd	/* SMP reschedule */
-#define IA64_IPI_VECTOR			0xfe	/* inter-processor interrupt vector */
-
-/* Used for encoding redirected irqs */
-
-#define IA64_IRQ_REDIRECTED		(1 << 31)
-
-/* IA64 inter-cpu interrupt related definitions */
-
-#define IA64_IPI_DEFAULT_BASE_ADDR	0xfee00000
-
-/* Delivery modes for inter-cpu interrupts */
-enum {
-        IA64_IPI_DM_INT =       0x0,    /* pend an external interrupt */
-        IA64_IPI_DM_PMI =       0x2,    /* pend a PMI */
-        IA64_IPI_DM_NMI =       0x4,    /* pend an NMI (vector 2) */
-        IA64_IPI_DM_INIT =      0x5,    /* pend an INIT interrupt */
-        IA64_IPI_DM_EXTINT =    0x7,    /* pend an 8259-compatible interrupt. */
-};
-
-extern __u8 isa_irq_to_vector_map[16];
-#define isa_irq_to_vector(x)	isa_irq_to_vector_map[(x)]
-
-struct irq_cfg {
-	ia64_vector vector;
-	cpumask_t domain;
-	cpumask_t old_domain;
-	unsigned move_cleanup_count;
-	u8 move_in_progress : 1;
-};
-extern spinlock_t vector_lock;
-extern struct irq_cfg irq_cfg[NR_IRQS];
-#define irq_to_domain(x)	irq_cfg[(x)].domain
-DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq);
-
-extern struct hw_interrupt_type irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
-
-extern int bind_irq_vector(int irq, int vector, cpumask_t domain);
-extern int assign_irq_vector (int irq);	/* allocate a free vector */
-extern void free_irq_vector (int vector);
-extern int reserve_irq_vector (int vector);
-extern void __setup_vector_irq(int cpu);
-extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
-extern void register_percpu_irq (ia64_vector vec, struct irqaction *action);
-extern int check_irq_used (int irq);
-extern void destroy_and_reserve_irq (unsigned int irq);
-
-#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
-extern int irq_prepare_move(int irq, int cpu);
-extern void irq_complete_move(unsigned int irq);
-#else
-static inline int irq_prepare_move(int irq, int cpu) { return 0; }
-static inline void irq_complete_move(unsigned int irq) {}
-#endif
-
-static inline void ia64_resend_irq(unsigned int vector)
-{
-	platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
-}
-
-/*
- * Default implementations for the irq-descriptor API:
- */
-
-extern irq_desc_t irq_desc[NR_IRQS];
-
-#ifndef CONFIG_IA64_GENERIC
-static inline ia64_vector __ia64_irq_to_vector(int irq)
-{
-	return irq_cfg[irq].vector;
-}
-
-static inline unsigned int
-__ia64_local_vector_to_irq (ia64_vector vec)
-{
-	return __get_cpu_var(vector_irq)[vec];
-}
-#endif
-
-/*
- * Next follows the irq descriptor interface.  On IA-64, each CPU supports 256 interrupt
- * vectors.  On smaller systems, there is a one-to-one correspondence between interrupt
- * vectors and the Linux irq numbers.  However, larger systems may have multiple interrupt
- * domains meaning that the translation from vector number to irq number depends on the
- * interrupt domain that a CPU belongs to.  This API abstracts such platform-dependent
- * differences and provides a uniform means to translate between vector and irq numbers
- * and to obtain the irq descriptor for a given irq number.
- */
-
-/* Extract the IA-64 vector that corresponds to IRQ.  */
-static inline ia64_vector
-irq_to_vector (int irq)
-{
-	return platform_irq_to_vector(irq);
-}
-
-/*
- * Convert the local IA-64 vector to the corresponding irq number.  This translation is
- * done in the context of the interrupt domain that the currently executing CPU belongs
- * to.
- */
-static inline unsigned int
-local_vector_to_irq (ia64_vector vec)
-{
-	return platform_local_vector_to_irq(vec);
-}
-
-#endif /* _ASM_IA64_HW_IRQ_H */
diff --git a/include/asm-ia64/ia32.h b/include/asm-ia64/ia32.h
deleted file mode 100644
index 2390ee145aa1..000000000000
--- a/include/asm-ia64/ia32.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_IA64_IA32_H
-#define _ASM_IA64_IA32_H
-
-
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-
-#define IA32_NR_syscalls		285	/* length of syscall table */
-#define IA32_PAGE_SHIFT			12	/* 4KB pages */
-
-#ifndef __ASSEMBLY__
-
-# ifdef CONFIG_IA32_SUPPORT
-
-#define IA32_PAGE_OFFSET	0xc0000000
-
-extern void ia32_cpu_init (void);
-extern void ia32_mem_init (void);
-extern void ia32_gdt_init (void);
-extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
-extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
-extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
-
-# endif /* !CONFIG_IA32_SUPPORT */
-
-/* Declare this unconditionally, so we don't get warnings for unreachable code.  */
-extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
-			      sigset_t *set, struct pt_regs *regs);
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-extern int ia32_copy_ia64_partial_page_list(struct task_struct *,
-					unsigned long);
-extern void ia32_drop_ia64_partial_page_list(struct task_struct *);
-#else
-# define ia32_copy_ia64_partial_page_list(a1, a2)	0
-# define ia32_drop_ia64_partial_page_list(a1)	do { ; } while (0)
-#endif
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_IA32_H */
diff --git a/include/asm-ia64/ia64regs.h b/include/asm-ia64/ia64regs.h
deleted file mode 100644
index 1757f1c11ad4..000000000000
--- a/include/asm-ia64/ia64regs.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (C) 2002,2003 Intel Corp.
- *      Jun Nakajima <jun.nakajima@intel.com>
- *      Suresh Siddha <suresh.b.siddha@intel.com>
- */
-
-#ifndef _ASM_IA64_IA64REGS_H
-#define _ASM_IA64_IA64REGS_H
-
-/*
- * Register Names for getreg() and setreg().
- *
- * The "magic" numbers happen to match the values used by the Intel compiler's
- * getreg()/setreg() intrinsics.
- */
-
-/* Special Registers */
-
-#define _IA64_REG_IP		1016	/* getreg only */
-#define _IA64_REG_PSR		1019
-#define _IA64_REG_PSR_L		1019
-
-/* General Integer Registers */
-
-#define _IA64_REG_GP		1025	/* R1 */
-#define _IA64_REG_R8		1032	/* R8 */
-#define _IA64_REG_R9		1033	/* R9 */
-#define _IA64_REG_SP		1036	/* R12 */
-#define _IA64_REG_TP		1037	/* R13 */
-
-/* Application Registers */
-
-#define _IA64_REG_AR_KR0	3072
-#define _IA64_REG_AR_KR1	3073
-#define _IA64_REG_AR_KR2	3074
-#define _IA64_REG_AR_KR3	3075
-#define _IA64_REG_AR_KR4	3076
-#define _IA64_REG_AR_KR5	3077
-#define _IA64_REG_AR_KR6	3078
-#define _IA64_REG_AR_KR7	3079
-#define _IA64_REG_AR_RSC	3088
-#define _IA64_REG_AR_BSP	3089
-#define _IA64_REG_AR_BSPSTORE	3090
-#define _IA64_REG_AR_RNAT	3091
-#define _IA64_REG_AR_FCR	3093
-#define _IA64_REG_AR_EFLAG	3096
-#define _IA64_REG_AR_CSD	3097
-#define _IA64_REG_AR_SSD	3098
-#define _IA64_REG_AR_CFLAG	3099
-#define _IA64_REG_AR_FSR	3100
-#define _IA64_REG_AR_FIR	3101
-#define _IA64_REG_AR_FDR	3102
-#define _IA64_REG_AR_CCV	3104
-#define _IA64_REG_AR_UNAT	3108
-#define _IA64_REG_AR_FPSR	3112
-#define _IA64_REG_AR_ITC	3116
-#define _IA64_REG_AR_PFS	3136
-#define _IA64_REG_AR_LC		3137
-#define _IA64_REG_AR_EC		3138
-
-/* Control Registers */
-
-#define _IA64_REG_CR_DCR	4096
-#define _IA64_REG_CR_ITM	4097
-#define _IA64_REG_CR_IVA	4098
-#define _IA64_REG_CR_PTA	4104
-#define _IA64_REG_CR_IPSR	4112
-#define _IA64_REG_CR_ISR	4113
-#define _IA64_REG_CR_IIP	4115
-#define _IA64_REG_CR_IFA	4116
-#define _IA64_REG_CR_ITIR	4117
-#define _IA64_REG_CR_IIPA	4118
-#define _IA64_REG_CR_IFS	4119
-#define _IA64_REG_CR_IIM	4120
-#define _IA64_REG_CR_IHA	4121
-#define _IA64_REG_CR_LID	4160
-#define _IA64_REG_CR_IVR	4161	/* getreg only */
-#define _IA64_REG_CR_TPR	4162
-#define _IA64_REG_CR_EOI	4163
-#define _IA64_REG_CR_IRR0	4164	/* getreg only */
-#define _IA64_REG_CR_IRR1	4165	/* getreg only */
-#define _IA64_REG_CR_IRR2	4166	/* getreg only */
-#define _IA64_REG_CR_IRR3	4167	/* getreg only */
-#define _IA64_REG_CR_ITV	4168
-#define _IA64_REG_CR_PMV	4169
-#define _IA64_REG_CR_CMCV	4170
-#define _IA64_REG_CR_LRR0	4176
-#define _IA64_REG_CR_LRR1	4177
-
-/* Indirect Registers for getindreg() and setindreg() */
-
-#define _IA64_REG_INDR_CPUID	9000	/* getindreg only */
-#define _IA64_REG_INDR_DBR	9001
-#define _IA64_REG_INDR_IBR	9002
-#define _IA64_REG_INDR_PKR	9003
-#define _IA64_REG_INDR_PMC	9004
-#define _IA64_REG_INDR_PMD	9005
-#define _IA64_REG_INDR_RR	9006
-
-#endif /* _ASM_IA64_IA64REGS_H */
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
deleted file mode 100644
index 8fa3f8cd067a..000000000000
--- a/include/asm-ia64/ide.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/include/asm-ia64/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the ia64 architecture specific IDE code.
- */
-
-#ifndef __ASM_IA64_IDE_H
-#define __ASM_IA64_IDE_H
-
-#ifdef __KERNEL__
-
-
-#include <linux/irq.h>
-
-static inline int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-	      case 0x1f0: return isa_irq_to_vector(14);
-	      case 0x170: return isa_irq_to_vector(15);
-	      case 0x1e8: return isa_irq_to_vector(11);
-	      case 0x168: return isa_irq_to_vector(10);
-	      case 0x1e0: return isa_irq_to_vector(8);
-	      case 0x160: return isa_irq_to_vector(12);
-	      default:
-		return 0;
-	}
-}
-
-static inline unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-	      case 0: return 0x1f0;
-	      case 1: return 0x170;
-	      case 2: return 0x1e8;
-	      case 3: return 0x168;
-	      case 4: return 0x1e0;
-	      case 5: return 0x160;
-	      default:
-		return 0;
-	}
-}
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_IA64_IDE_H */
diff --git a/include/asm-ia64/intel_intrin.h b/include/asm-ia64/intel_intrin.h
deleted file mode 100644
index a520d103d808..000000000000
--- a/include/asm-ia64/intel_intrin.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _ASM_IA64_INTEL_INTRIN_H
-#define _ASM_IA64_INTEL_INTRIN_H
-/*
- * Intel Compiler Intrinsics
- *
- * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
- * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
- * Copyright (C) 2005,2006 Hongjiu Lu <hongjiu.lu@intel.com>
- *
- */
-#include <ia64intrin.h>
-
-#define ia64_barrier()		__memory_barrier()
-
-#define ia64_stop()	/* Nothing: As of now stop bit is generated for each
-		 	 * intrinsic
-		 	 */
-
-#define ia64_getreg		__getReg
-#define ia64_setreg		__setReg
-
-#define ia64_hint		__hint
-#define ia64_hint_pause		__hint_pause
-
-#define ia64_mux1_brcst		_m64_mux1_brcst
-#define ia64_mux1_mix		_m64_mux1_mix
-#define ia64_mux1_shuf		_m64_mux1_shuf
-#define ia64_mux1_alt		_m64_mux1_alt
-#define ia64_mux1_rev		_m64_mux1_rev
-
-#define ia64_mux1(x,v)		_m_to_int64(_m64_mux1(_m_from_int64(x), (v)))
-#define ia64_popcnt		_m64_popcnt
-#define ia64_getf_exp		__getf_exp
-#define ia64_shrp		_m64_shrp
-
-#define ia64_tpa		__tpa
-#define ia64_invala		__invala
-#define ia64_invala_gr		__invala_gr
-#define ia64_invala_fr		__invala_fr
-#define ia64_nop		__nop
-#define ia64_sum		__sum
-#define ia64_ssm		__ssm
-#define ia64_rum		__rum
-#define ia64_rsm		__rsm
-#define ia64_fc 		__fc
-
-#define ia64_ldfs		__ldfs
-#define ia64_ldfd		__ldfd
-#define ia64_ldfe		__ldfe
-#define ia64_ldf8		__ldf8
-#define ia64_ldf_fill		__ldf_fill
-
-#define ia64_stfs		__stfs
-#define ia64_stfd		__stfd
-#define ia64_stfe		__stfe
-#define ia64_stf8		__stf8
-#define ia64_stf_spill		__stf_spill
-
-#define ia64_mf			__mf
-#define ia64_mfa		__mfa
-
-#define ia64_fetchadd4_acq	__fetchadd4_acq
-#define ia64_fetchadd4_rel	__fetchadd4_rel
-#define ia64_fetchadd8_acq	__fetchadd8_acq
-#define ia64_fetchadd8_rel	__fetchadd8_rel
-
-#define ia64_xchg1		_InterlockedExchange8
-#define ia64_xchg2		_InterlockedExchange16
-#define ia64_xchg4		_InterlockedExchange
-#define ia64_xchg8		_InterlockedExchange64
-
-#define ia64_cmpxchg1_rel	_InterlockedCompareExchange8_rel
-#define ia64_cmpxchg1_acq	_InterlockedCompareExchange8_acq
-#define ia64_cmpxchg2_rel	_InterlockedCompareExchange16_rel
-#define ia64_cmpxchg2_acq	_InterlockedCompareExchange16_acq
-#define ia64_cmpxchg4_rel	_InterlockedCompareExchange_rel
-#define ia64_cmpxchg4_acq	_InterlockedCompareExchange_acq
-#define ia64_cmpxchg8_rel	_InterlockedCompareExchange64_rel
-#define ia64_cmpxchg8_acq	_InterlockedCompareExchange64_acq
-
-#define __ia64_set_dbr(index, val)	\
-		__setIndReg(_IA64_REG_INDR_DBR, index, val)
-#define ia64_set_ibr(index, val)	\
-		__setIndReg(_IA64_REG_INDR_IBR, index, val)
-#define ia64_set_pkr(index, val)	\
-		__setIndReg(_IA64_REG_INDR_PKR, index, val)
-#define ia64_set_pmc(index, val)	\
-		__setIndReg(_IA64_REG_INDR_PMC, index, val)
-#define ia64_set_pmd(index, val)	\
-		__setIndReg(_IA64_REG_INDR_PMD, index, val)
-#define ia64_set_rr(index, val)	\
-		__setIndReg(_IA64_REG_INDR_RR, index, val)
-
-#define ia64_get_cpuid(index) 	__getIndReg(_IA64_REG_INDR_CPUID, index)
-#define __ia64_get_dbr(index) 	__getIndReg(_IA64_REG_INDR_DBR, index)
-#define ia64_get_ibr(index) 	__getIndReg(_IA64_REG_INDR_IBR, index)
-#define ia64_get_pkr(index) 	__getIndReg(_IA64_REG_INDR_PKR, index)
-#define ia64_get_pmc(index) 	__getIndReg(_IA64_REG_INDR_PMC, index)
-#define ia64_get_pmd(index)  	__getIndReg(_IA64_REG_INDR_PMD, index)
-#define ia64_get_rr(index) 	__getIndReg(_IA64_REG_INDR_RR, index)
-
-#define ia64_srlz_d		__dsrlz
-#define ia64_srlz_i		__isrlz
-
-#define ia64_dv_serialize_data()
-#define ia64_dv_serialize_instruction()
-
-#define ia64_st1_rel		__st1_rel
-#define ia64_st2_rel		__st2_rel
-#define ia64_st4_rel		__st4_rel
-#define ia64_st8_rel		__st8_rel
-
-/* FIXME: need st4.rel.nta intrinsic */
-#define ia64_st4_rel_nta	__st4_rel
-
-#define ia64_ld1_acq		__ld1_acq
-#define ia64_ld2_acq		__ld2_acq
-#define ia64_ld4_acq		__ld4_acq
-#define ia64_ld8_acq		__ld8_acq
-
-#define ia64_sync_i		__synci
-#define ia64_thash		__thash
-#define ia64_ttag		__ttag
-#define ia64_itcd		__itcd
-#define ia64_itci		__itci
-#define ia64_itrd		__itrd
-#define ia64_itri		__itri
-#define ia64_ptce		__ptce
-#define ia64_ptcl		__ptcl
-#define ia64_ptcg		__ptcg
-#define ia64_ptcga		__ptcga
-#define ia64_ptri		__ptri
-#define ia64_ptrd		__ptrd
-#define ia64_dep_mi		_m64_dep_mi
-
-/* Values for lfhint in __lfetch and __lfetch_fault */
-
-#define ia64_lfhint_none	__lfhint_none
-#define ia64_lfhint_nt1		__lfhint_nt1
-#define ia64_lfhint_nt2		__lfhint_nt2
-#define ia64_lfhint_nta		__lfhint_nta
-
-#define ia64_lfetch		__lfetch
-#define ia64_lfetch_excl	__lfetch_excl
-#define ia64_lfetch_fault	__lfetch_fault
-#define ia64_lfetch_fault_excl	__lfetch_fault_excl
-
-#define ia64_intrin_local_irq_restore(x)		\
-do {							\
-	if ((x) != 0) {					\
-		ia64_ssm(IA64_PSR_I);			\
-		ia64_srlz_d();				\
-	} else {					\
-		ia64_rsm(IA64_PSR_I);			\
-	}						\
-} while (0)
-
-#define __builtin_trap()	__break(0);
-
-#endif /* _ASM_IA64_INTEL_INTRIN_H */
diff --git a/include/asm-ia64/intrinsics.h b/include/asm-ia64/intrinsics.h
deleted file mode 100644
index f1135b5b94c3..000000000000
--- a/include/asm-ia64/intrinsics.h
+++ /dev/null
@@ -1,186 +0,0 @@
-#ifndef _ASM_IA64_INTRINSICS_H
-#define _ASM_IA64_INTRINSICS_H
-
-/*
- * Compiler-dependent intrinsics.
- *
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#ifndef __ASSEMBLY__
-
-/* include compiler specific intrinsics */
-#include <asm/ia64regs.h>
-#ifdef __INTEL_COMPILER
-# include <asm/intel_intrin.h>
-#else
-# include <asm/gcc_intrin.h>
-#endif
-
-/*
- * Force an unresolved reference if someone tries to use
- * ia64_fetch_and_add() with a bad value.
- */
-extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
-extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
-
-#define IA64_FETCHADD(tmp,v,n,sz,sem)						\
-({										\
-	switch (sz) {								\
-	      case 4:								\
-	        tmp = ia64_fetchadd4_##sem((unsigned int *) v, n);		\
-		break;								\
-										\
-	      case 8:								\
-	        tmp = ia64_fetchadd8_##sem((unsigned long *) v, n);		\
-		break;								\
-										\
-	      default:								\
-		__bad_size_for_ia64_fetch_and_add();				\
-	}									\
-})
-
-#define ia64_fetchadd(i,v,sem)								\
-({											\
-	__u64 _tmp;									\
-	volatile __typeof__(*(v)) *_v = (v);						\
-	/* Can't use a switch () here: gcc isn't always smart enough for that... */	\
-	if ((i) == -16)									\
-		IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem);			\
-	else if ((i) == -8)								\
-		IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem);				\
-	else if ((i) == -4)								\
-		IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem);				\
-	else if ((i) == -1)								\
-		IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem);				\
-	else if ((i) == 1)								\
-		IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem);				\
-	else if ((i) == 4)								\
-		IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem);				\
-	else if ((i) == 8)								\
-		IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem);				\
-	else if ((i) == 16)								\
-		IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem);				\
-	else										\
-		_tmp = __bad_increment_for_ia64_fetch_and_add();			\
-	(__typeof__(*(v))) (_tmp);	/* return old value */				\
-})
-
-#define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
-
-/*
- * This function doesn't exist, so you'll get a linker error if
- * something tries to do an invalid xchg().
- */
-extern void ia64_xchg_called_with_bad_pointer (void);
-
-#define __xchg(x,ptr,size)						\
-({									\
-	unsigned long __xchg_result;					\
-									\
-	switch (size) {							\
-	      case 1:							\
-		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
-		break;							\
-									\
-	      case 2:							\
-		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
-		break;							\
-									\
-	      case 4:							\
-		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
-		break;							\
-									\
-	      case 8:							\
-		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
-		break;							\
-	      default:							\
-		ia64_xchg_called_with_bad_pointer();			\
-	}								\
-	__xchg_result;							\
-})
-
-#define xchg(ptr,x)							     \
-  ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg().
- */
-extern long ia64_cmpxchg_called_with_bad_pointer (void);
-
-#define ia64_cmpxchg(sem,ptr,old,new,size)						\
-({											\
-	__u64 _o_, _r_;									\
-											\
-	switch (size) {									\
-	      case 1: _o_ = (__u8 ) (long) (old); break;				\
-	      case 2: _o_ = (__u16) (long) (old); break;				\
-	      case 4: _o_ = (__u32) (long) (old); break;				\
-	      case 8: _o_ = (__u64) (long) (old); break;				\
-	      default: break;								\
-	}										\
-	switch (size) {									\
-	      case 1:									\
-	      	_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 2:									\
-	       _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 4:									\
-	      	_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      case 8:									\
-		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);			\
-		break;									\
-											\
-	      default:									\
-		_r_ = ia64_cmpxchg_called_with_bad_pointer();				\
-		break;									\
-	}										\
-	(__typeof__(old)) _r_;								\
-})
-
-#define cmpxchg_acq(ptr, o, n)	\
-	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
-#define cmpxchg_rel(ptr, o, n)	\
-	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
-
-/* for compatibility with other platforms: */
-#define cmpxchg(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
-#define cmpxchg64(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
-
-#define cmpxchg_local		cmpxchg
-#define cmpxchg64_local		cmpxchg64
-
-#ifdef CONFIG_IA64_DEBUG_CMPXCHG
-# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
-# define CMPXCHG_BUGCHECK(v)							\
-  do {										\
-	if (_cmpxchg_bugcheck_count-- <= 0) {					\
-		void *ip;							\
-		extern int printk(const char *fmt, ...);			\
-		ip = (void *) ia64_getreg(_IA64_REG_IP);			\
-		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));	\
-		break;								\
-	}									\
-  } while (0)
-#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
-# define CMPXCHG_BUGCHECK_DECL
-# define CMPXCHG_BUGCHECK(v)
-#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
-
-#endif
-#endif /* _ASM_IA64_INTRINSICS_H */
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
deleted file mode 100644
index 260a85ac9d6a..000000000000
--- a/include/asm-ia64/io.h
+++ /dev/null
@@ -1,459 +0,0 @@
-#ifndef _ASM_IA64_IO_H
-#define _ASM_IA64_IO_H
-
-/*
- * This file contains the definitions for the emulated IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated to
- * (a) handle it all in a way that makes gcc able to optimize it as
- * well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- *
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
- */
-
-/* We don't use IO slowdowns on the ia64, but.. */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
-#define __IA64_UNCACHED_OFFSET	RGN_BASE(RGN_UNCACHED)
-
-/*
- * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
- * large machines may have multiple other I/O spaces so we can't place any a priori limit
- * on IO_SPACE_LIMIT.  These additional spaces are described in ACPI.
- */
-#define IO_SPACE_LIMIT		0xffffffffffffffffUL
-
-#define MAX_IO_SPACES_BITS		8
-#define MAX_IO_SPACES			(1UL << MAX_IO_SPACES_BITS)
-#define IO_SPACE_BITS			24
-#define IO_SPACE_SIZE			(1UL << IO_SPACE_BITS)
-
-#define IO_SPACE_NR(port)		((port) >> IO_SPACE_BITS)
-#define IO_SPACE_BASE(space)		((space) << IO_SPACE_BITS)
-#define IO_SPACE_PORT(port)		((port) & (IO_SPACE_SIZE - 1))
-
-#define IO_SPACE_SPARSE_ENCODING(p)	((((p) >> 2) << 12) | ((p) & 0xfff))
-
-struct io_space {
-	unsigned long mmio_base;	/* base in MMIO space */
-	int sparse;
-};
-
-extern struct io_space io_space[];
-extern unsigned int num_io_spaces;
-
-# ifdef __KERNEL__
-
-/*
- * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
- *	0xCxxxxxxxxxxxxxxx	MMIO cookie (return from ioremap)
- *	0x000000001SPPPPPP	PIO cookie (S=space number, P..P=port)
- *
- * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
- * code that uses bare port numbers without the prerequisite pci_iomap().
- */
-#define PIO_OFFSET		(1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
-#define PIO_MASK		(PIO_OFFSET - 1)
-#define PIO_RESERVED		__IA64_UNCACHED_OFFSET
-#define HAVE_ARCH_PIO_SIZE
-
-#include <asm/intrinsics.h>
-#include <asm/machvec.h>
-#include <asm/page.h>
-#include <asm/system.h>
-#include <asm-generic/iomap.h>
-
-/*
- * Change virtual addresses to physical addresses and vv.
- */
-static inline unsigned long
-virt_to_phys (volatile void *address)
-{
-	return (unsigned long) address - PAGE_OFFSET;
-}
-
-static inline void*
-phys_to_virt (unsigned long address)
-{
-	return (void *) (address + PAGE_OFFSET);
-}
-
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
-extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
-extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
-
-/*
- * The following two macros are deprecated and scheduled for removal.
- * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
- */
-#define bus_to_virt	phys_to_virt
-#define virt_to_bus	virt_to_phys
-#define page_to_bus	page_to_phys
-
-# endif /* KERNEL */
-
-/*
- * Memory fence w/accept.  This should never be used in code that is
- * not IA-64 specific.
- */
-#define __ia64_mf_a()	ia64_mfa()
-
-/**
- * ___ia64_mmiowb - I/O write barrier
- *
- * Ensure ordering of I/O space writes.  This will make sure that writes
- * following the barrier will arrive after all previous writes.  For most
- * ia64 platforms, this is a simple 'mf.a' instruction.
- *
- * See Documentation/DocBook/deviceiobook.tmpl for more information.
- */
-static inline void ___ia64_mmiowb(void)
-{
-	ia64_mfa();
-}
-
-static inline void*
-__ia64_mk_io_addr (unsigned long port)
-{
-	struct io_space *space;
-	unsigned long offset;
-
-	space = &io_space[IO_SPACE_NR(port)];
-	port = IO_SPACE_PORT(port);
-	if (space->sparse)
-		offset = IO_SPACE_SPARSE_ENCODING(port);
-	else
-		offset = port;
-
-	return (void *) (space->mmio_base | offset);
-}
-
-#define __ia64_inb	___ia64_inb
-#define __ia64_inw	___ia64_inw
-#define __ia64_inl	___ia64_inl
-#define __ia64_outb	___ia64_outb
-#define __ia64_outw	___ia64_outw
-#define __ia64_outl	___ia64_outl
-#define __ia64_readb	___ia64_readb
-#define __ia64_readw	___ia64_readw
-#define __ia64_readl	___ia64_readl
-#define __ia64_readq	___ia64_readq
-#define __ia64_readb_relaxed	___ia64_readb
-#define __ia64_readw_relaxed	___ia64_readw
-#define __ia64_readl_relaxed	___ia64_readl
-#define __ia64_readq_relaxed	___ia64_readq
-#define __ia64_writeb	___ia64_writeb
-#define __ia64_writew	___ia64_writew
-#define __ia64_writel	___ia64_writel
-#define __ia64_writeq	___ia64_writeq
-#define __ia64_mmiowb	___ia64_mmiowb
-
-/*
- * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
- * that the access has completed before executing other I/O accesses.  Since we're doing
- * the accesses through an uncachable (UC) translation, the CPU will execute them in
- * program order.  However, we still need to tell the compiler not to shuffle them around
- * during optimization, which is why we use "volatile" pointers.
- */
-
-static inline unsigned int
-___ia64_inb (unsigned long port)
-{
-	volatile unsigned char *addr = __ia64_mk_io_addr(port);
-	unsigned char ret;
-
-	ret = *addr;
-	__ia64_mf_a();
-	return ret;
-}
-
-static inline unsigned int
-___ia64_inw (unsigned long port)
-{
-	volatile unsigned short *addr = __ia64_mk_io_addr(port);
-	unsigned short ret;
-
-	ret = *addr;
-	__ia64_mf_a();
-	return ret;
-}
-
-static inline unsigned int
-___ia64_inl (unsigned long port)
-{
-	volatile unsigned int *addr = __ia64_mk_io_addr(port);
-	unsigned int ret;
-
-	ret = *addr;
-	__ia64_mf_a();
-	return ret;
-}
-
-static inline void
-___ia64_outb (unsigned char val, unsigned long port)
-{
-	volatile unsigned char *addr = __ia64_mk_io_addr(port);
-
-	*addr = val;
-	__ia64_mf_a();
-}
-
-static inline void
-___ia64_outw (unsigned short val, unsigned long port)
-{
-	volatile unsigned short *addr = __ia64_mk_io_addr(port);
-
-	*addr = val;
-	__ia64_mf_a();
-}
-
-static inline void
-___ia64_outl (unsigned int val, unsigned long port)
-{
-	volatile unsigned int *addr = __ia64_mk_io_addr(port);
-
-	*addr = val;
-	__ia64_mf_a();
-}
-
-static inline void
-__insb (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned char *dp = dst;
-
-	while (count--)
-		*dp++ = platform_inb(port);
-}
-
-static inline void
-__insw (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned short *dp = dst;
-
-	while (count--)
-		*dp++ = platform_inw(port);
-}
-
-static inline void
-__insl (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned int *dp = dst;
-
-	while (count--)
-		*dp++ = platform_inl(port);
-}
-
-static inline void
-__outsb (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned char *sp = src;
-
-	while (count--)
-		platform_outb(*sp++, port);
-}
-
-static inline void
-__outsw (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned short *sp = src;
-
-	while (count--)
-		platform_outw(*sp++, port);
-}
-
-static inline void
-__outsl (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned int *sp = src;
-
-	while (count--)
-		platform_outl(*sp++, port);
-}
-
-/*
- * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
- * specification regarding legacy I/O support.  Thus, we have to make these operations
- * platform dependent...
- */
-#define __inb		platform_inb
-#define __inw		platform_inw
-#define __inl		platform_inl
-#define __outb		platform_outb
-#define __outw		platform_outw
-#define __outl		platform_outl
-#define __mmiowb	platform_mmiowb
-
-#define inb(p)		__inb(p)
-#define inw(p)		__inw(p)
-#define inl(p)		__inl(p)
-#define insb(p,d,c)	__insb(p,d,c)
-#define insw(p,d,c)	__insw(p,d,c)
-#define insl(p,d,c)	__insl(p,d,c)
-#define outb(v,p)	__outb(v,p)
-#define outw(v,p)	__outw(v,p)
-#define outl(v,p)	__outl(v,p)
-#define outsb(p,s,c)	__outsb(p,s,c)
-#define outsw(p,s,c)	__outsw(p,s,c)
-#define outsl(p,s,c)	__outsl(p,s,c)
-#define mmiowb()	__mmiowb()
-
-/*
- * The address passed to these functions are ioremap()ped already.
- *
- * We need these to be machine vectors since some platforms don't provide
- * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
- * a good idea).  Writes are ok though for all existing ia64 platforms (and
- * hopefully it'll stay that way).
- */
-static inline unsigned char
-___ia64_readb (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-
-static inline unsigned short
-___ia64_readw (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned short __force *)addr;
-}
-
-static inline unsigned int
-___ia64_readl (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned int __force *) addr;
-}
-
-static inline unsigned long
-___ia64_readq (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned long __force *) addr;
-}
-
-static inline void
-__writeb (unsigned char val, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *) addr = val;
-}
-
-static inline void
-__writew (unsigned short val, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *) addr = val;
-}
-
-static inline void
-__writel (unsigned int val, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *) addr = val;
-}
-
-static inline void
-__writeq (unsigned long val, volatile void __iomem *addr)
-{
-	*(volatile unsigned long __force *) addr = val;
-}
-
-#define __readb		platform_readb
-#define __readw		platform_readw
-#define __readl		platform_readl
-#define __readq		platform_readq
-#define __readb_relaxed	platform_readb_relaxed
-#define __readw_relaxed	platform_readw_relaxed
-#define __readl_relaxed	platform_readl_relaxed
-#define __readq_relaxed	platform_readq_relaxed
-
-#define readb(a)	__readb((a))
-#define readw(a)	__readw((a))
-#define readl(a)	__readl((a))
-#define readq(a)	__readq((a))
-#define readb_relaxed(a)	__readb_relaxed((a))
-#define readw_relaxed(a)	__readw_relaxed((a))
-#define readl_relaxed(a)	__readl_relaxed((a))
-#define readq_relaxed(a)	__readq_relaxed((a))
-#define __raw_readb	readb
-#define __raw_readw	readw
-#define __raw_readl	readl
-#define __raw_readq	readq
-#define __raw_readb_relaxed	readb_relaxed
-#define __raw_readw_relaxed	readw_relaxed
-#define __raw_readl_relaxed	readl_relaxed
-#define __raw_readq_relaxed	readq_relaxed
-#define writeb(v,a)	__writeb((v), (a))
-#define writew(v,a)	__writew((v), (a))
-#define writel(v,a)	__writel((v), (a))
-#define writeq(v,a)	__writeq((v), (a))
-#define __raw_writeb	writeb
-#define __raw_writew	writew
-#define __raw_writel	writel
-#define __raw_writeq	writeq
-
-#ifndef inb_p
-# define inb_p		inb
-#endif
-#ifndef inw_p
-# define inw_p		inw
-#endif
-#ifndef inl_p
-# define inl_p		inl
-#endif
-
-#ifndef outb_p
-# define outb_p		outb
-#endif
-#ifndef outw_p
-# define outw_p		outw
-#endif
-#ifndef outl_p
-# define outl_p		outl
-#endif
-
-# ifdef __KERNEL__
-
-extern void __iomem * ioremap(unsigned long offset, unsigned long size);
-extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
-extern void iounmap (volatile void __iomem *addr);
-
-/*
- * String version of IO memory access ops:
- */
-extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
-extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
-extern void memset_io(volatile void __iomem *s, int c, long n);
-
-# endif /* __KERNEL__ */
-
-/*
- * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
- * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
- * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
- * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
- * over BIO-level virtual merging.
- */
-extern unsigned long ia64_max_iommu_merge_mask;
-#if 1
-#define BIO_VMERGE_BOUNDARY	0
-#else
-/*
- * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
- * replaced by dma_merge_mask() or something of that sort.  Note: the only way
- * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
- * expanded into:
- *
- *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
- *
- * which is precisely what we want.
- */
-#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
-#endif
-
-#endif /* _ASM_IA64_IO_H */
diff --git a/include/asm-ia64/ioctl.h b/include/asm-ia64/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-ia64/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-ia64/ioctls.h b/include/asm-ia64/ioctls.h
deleted file mode 100644
index f41b636a0bf6..000000000000
--- a/include/asm-ia64/ioctls.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef _ASM_IA64_IOCTLS_H
-#define _ASM_IA64_IOCTLS_H
-
-/*
- * Based on <asm-i386/ioctls.h>
- *
- * Modified 1998, 1999, 2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-#endif /* _ASM_IA64_IOCTLS_H */
diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h
deleted file mode 100644
index a3a4288daae8..000000000000
--- a/include/asm-ia64/iosapic.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef __ASM_IA64_IOSAPIC_H
-#define __ASM_IA64_IOSAPIC_H
-
-#define	IOSAPIC_REG_SELECT	0x0
-#define	IOSAPIC_WINDOW		0x10
-#define	IOSAPIC_EOI		0x40
-
-#define	IOSAPIC_VERSION		0x1
-
-/*
- * Redirection table entry
- */
-#define	IOSAPIC_RTE_LOW(i)	(0x10+i*2)
-#define	IOSAPIC_RTE_HIGH(i)	(0x11+i*2)
-
-#define	IOSAPIC_DEST_SHIFT		16
-
-/*
- * Delivery mode
- */
-#define	IOSAPIC_DELIVERY_SHIFT		8
-#define	IOSAPIC_FIXED			0x0
-#define	IOSAPIC_LOWEST_PRIORITY	0x1
-#define	IOSAPIC_PMI			0x2
-#define	IOSAPIC_NMI			0x4
-#define	IOSAPIC_INIT			0x5
-#define	IOSAPIC_EXTINT			0x7
-
-/*
- * Interrupt polarity
- */
-#define	IOSAPIC_POLARITY_SHIFT		13
-#define	IOSAPIC_POL_HIGH		0
-#define	IOSAPIC_POL_LOW		1
-
-/*
- * Trigger mode
- */
-#define	IOSAPIC_TRIGGER_SHIFT		15
-#define	IOSAPIC_EDGE			0
-#define	IOSAPIC_LEVEL			1
-
-/*
- * Mask bit
- */
-
-#define	IOSAPIC_MASK_SHIFT		16
-#define	IOSAPIC_MASK			(1<<IOSAPIC_MASK_SHIFT)
-
-#define IOSAPIC_VECTOR_MASK		0xffffff00
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_IOSAPIC
-
-#define NR_IOSAPICS			256
-
-static inline unsigned int __iosapic_read(char __iomem *iosapic, unsigned int reg)
-{
-	writel(reg, iosapic + IOSAPIC_REG_SELECT);
-	return readl(iosapic + IOSAPIC_WINDOW);
-}
-
-static inline void __iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
-{
-	writel(reg, iosapic + IOSAPIC_REG_SELECT);
-	writel(val, iosapic + IOSAPIC_WINDOW);
-}
-
-static inline void iosapic_eoi(char __iomem *iosapic, u32 vector)
-{
-	writel(vector, iosapic + IOSAPIC_EOI);
-}
-
-extern void __init iosapic_system_init (int pcat_compat);
-extern int __devinit iosapic_init (unsigned long address,
-				    unsigned int gsi_base);
-#ifdef CONFIG_HOTPLUG
-extern int iosapic_remove (unsigned int gsi_base);
-#else
-#define iosapic_remove(gsi_base)				(-EINVAL)
-#endif /* CONFIG_HOTPLUG */
-extern int gsi_to_irq (unsigned int gsi);
-extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
-				  unsigned long trigger);
-extern void iosapic_unregister_intr (unsigned int irq);
-extern void __devinit iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
-				      unsigned long polarity,
-				      unsigned long trigger);
-extern int __init iosapic_register_platform_intr (u32 int_type,
-					   unsigned int gsi,
-					   int pmi_vector,
-					   u16 eid, u16 id,
-					   unsigned long polarity,
-					   unsigned long trigger);
-
-#ifdef CONFIG_NUMA
-extern void __devinit map_iosapic_to_node (unsigned int, int);
-#endif
-#else
-#define iosapic_system_init(pcat_compat)			do { } while (0)
-#define iosapic_init(address,gsi_base)				(-EINVAL)
-#define iosapic_remove(gsi_base)				(-ENODEV)
-#define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
-#define iosapic_unregister_intr(irq)				do { } while (0)
-#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)
-#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
-	polarity,trigger)					(gsi)
-#endif
-
-# endif /* !__ASSEMBLY__ */
-#endif /* __ASM_IA64_IOSAPIC_H */
diff --git a/include/asm-ia64/ipcbuf.h b/include/asm-ia64/ipcbuf.h
deleted file mode 100644
index 079899ae7d32..000000000000
--- a/include/asm-ia64/ipcbuf.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _ASM_IA64_IPCBUF_H
-#define _ASM_IA64_IPCBUF_H
-
-/*
- * The ipc64_perm structure for IA-64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode;
-	unsigned short	seq;
-	unsigned short	__pad1;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _ASM_IA64_IPCBUF_H */
diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h
deleted file mode 100644
index a66d26827cbb..000000000000
--- a/include/asm-ia64/irq.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _ASM_IA64_IRQ_H
-#define _ASM_IA64_IRQ_H
-
-/*
- * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- *
- * 11/24/98	S.Eranian 	updated TIMER_IRQ and irq_canonicalize
- * 01/20/99	S.Eranian	added keyboard interrupt
- * 02/29/00     D.Mosberger	moved most things into hw_irq.h
- */
-
-#include <linux/types.h>
-#include <linux/cpumask.h>
-
-#define NR_VECTORS	256
-
-#if (NR_VECTORS + 32 * NR_CPUS) < 1024
-#define NR_IRQS (NR_VECTORS + 32 * NR_CPUS)
-#else
-#define NR_IRQS 1024
-#endif
-
-static __inline__ int
-irq_canonicalize (int irq)
-{
-	/*
-	 * We do the legacy thing here of pretending that irqs < 16
-	 * are 8259 irqs.  This really shouldn't be necessary at all,
-	 * but we keep it here as serial.c still uses it...
-	 */
-	return ((irq == 2) ? 9 : irq);
-}
-
-extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
-bool is_affinity_mask_valid(cpumask_t cpumask);
-
-#define is_affinity_mask_valid is_affinity_mask_valid
-
-#endif /* _ASM_IA64_IRQ_H */
diff --git a/include/asm-ia64/irq_regs.h b/include/asm-ia64/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-ia64/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-ia64/kdebug.h b/include/asm-ia64/kdebug.h
deleted file mode 100644
index 35e49407d06c..000000000000
--- a/include/asm-ia64/kdebug.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _IA64_KDEBUG_H
-#define _IA64_KDEBUG_H 1
-/*
- * include/asm-ia64/kdebug.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) Intel Corporation, 2005
- *
- * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
- *              <anil.s.keshavamurthy@intel.com> adopted from
- *              include/asm-x86_64/kdebug.h
- *
- * 2005-Oct	Keith Owens <kaos@sgi.com>.  Expand notify_die to cover more
- *		events.
- */
-
-enum die_val {
-	DIE_BREAK = 1,
-	DIE_FAULT,
-	DIE_OOPS,
-	DIE_MACHINE_HALT,
-	DIE_MACHINE_RESTART,
-	DIE_MCA_MONARCH_ENTER,
-	DIE_MCA_MONARCH_PROCESS,
-	DIE_MCA_MONARCH_LEAVE,
-	DIE_MCA_SLAVE_ENTER,
-	DIE_MCA_SLAVE_PROCESS,
-	DIE_MCA_SLAVE_LEAVE,
-	DIE_MCA_RENDZVOUS_ENTER,
-	DIE_MCA_RENDZVOUS_PROCESS,
-	DIE_MCA_RENDZVOUS_LEAVE,
-	DIE_MCA_NEW_TIMEOUT,
-	DIE_INIT_ENTER,
-	DIE_INIT_MONARCH_ENTER,
-	DIE_INIT_MONARCH_PROCESS,
-	DIE_INIT_MONARCH_LEAVE,
-	DIE_INIT_SLAVE_ENTER,
-	DIE_INIT_SLAVE_PROCESS,
-	DIE_INIT_SLAVE_LEAVE,
-	DIE_KDEBUG_ENTER,
-	DIE_KDEBUG_LEAVE,
-	DIE_KDUMP_ENTER,
-	DIE_KDUMP_LEAVE,
-};
-
-#endif
diff --git a/include/asm-ia64/kexec.h b/include/asm-ia64/kexec.h
deleted file mode 100644
index 541be835fc5a..000000000000
--- a/include/asm-ia64/kexec.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _ASM_IA64_KEXEC_H
-#define _ASM_IA64_KEXEC_H
-
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096)
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_IA_64
-
-#define kexec_flush_icache_page(page) do { \
-                unsigned long page_addr = (unsigned long)page_address(page); \
-                flush_icache_range(page_addr, page_addr + PAGE_SIZE); \
-        } while(0)
-
-extern struct kimage *ia64_kimage;
-extern const unsigned int relocate_new_kernel_size;
-extern void relocate_new_kernel(unsigned long, unsigned long,
-		struct ia64_boot_param *, unsigned long);
-static inline void
-crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs)
-{
-}
-extern struct resource efi_memmap_res;
-extern struct resource boot_param_res;
-extern void kdump_smp_send_stop(void);
-extern void kdump_smp_send_init(void);
-extern void kexec_disable_iosapic(void);
-extern void crash_save_this_cpu(void);
-struct rsvd_region;
-extern unsigned long kdump_find_rsvd_region(unsigned long size,
-		struct rsvd_region *rsvd_regions, int n);
-extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg);
-extern int kdump_status[];
-extern atomic_t kdump_cpu_freezed;
-extern atomic_t kdump_in_progress;
-
-#endif /* _ASM_IA64_KEXEC_H */
diff --git a/include/asm-ia64/kmap_types.h b/include/asm-ia64/kmap_types.h
deleted file mode 100644
index 5d1658aa2b3b..000000000000
--- a/include/asm-ia64/kmap_types.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _ASM_IA64_KMAP_TYPES_H
-#define _ASM_IA64_KMAP_TYPES_H
-
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
-#endif
-
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
-
-#undef D
-
-#endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h
deleted file mode 100644
index ef71b57fc2f4..000000000000
--- a/include/asm-ia64/kprobes.h
+++ /dev/null
@@ -1,133 +0,0 @@
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
-/*
- *  Kernel Probes (KProbes)
- *  include/asm-ia64/kprobes.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- * Copyright (C) Intel Corporation, 2005
- *
- * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
- *              <anil.s.keshavamurthy@intel.com> adapted from i386
- */
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-#include <asm/break.h>
-
-#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE   2	/* last half is for kprobe-booster */
-#define BREAK_INST	(long)(__IA64_BREAK_KPROBE << 6)
-#define NOP_M_INST	(long)(1<<27)
-#define BRL_INST(i1, i2) ((long)((0xcL << 37) |	/* brl */ \
-				(0x1L << 12) |	/* many */ \
-				(((i1) & 1) << 36) | ((i2) << 13))) /* imm */
-
-typedef union cmp_inst {
-	struct {
-	unsigned long long qp : 6;
-	unsigned long long p1 : 6;
-	unsigned long long c  : 1;
-	unsigned long long r2 : 7;
-	unsigned long long r3 : 7;
-	unsigned long long p2 : 6;
-	unsigned long long ta : 1;
-	unsigned long long x2 : 2;
-	unsigned long long tb : 1;
-	unsigned long long opcode : 4;
-	unsigned long long reserved : 23;
-	}f;
-	unsigned long long l;
-} cmp_inst_t;
-
-struct kprobe;
-
-typedef struct _bundle {
-	struct {
-		unsigned long long template : 5;
-		unsigned long long slot0 : 41;
-		unsigned long long slot1_p0 : 64-46;
-	} quad0;
-	struct {
-		unsigned long long slot1_p1 : 41 - (64-46);
-		unsigned long long slot2 : 41;
-	} quad1;
-} __attribute__((__aligned__(16)))  bundle_t;
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned long status;
-};
-
-#define	MAX_PARAM_RSE_SIZE	(0x60+0x60/0x3f)
-/* per-cpu kprobe control block */
-#define ARCH_PREV_KPROBE_SZ 2
-struct kprobe_ctlblk {
-	unsigned long kprobe_status;
-	struct pt_regs jprobe_saved_regs;
-	unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
-	unsigned long *bsp;
-	unsigned long cfm;
-	atomic_t prev_kprobe_index;
-	struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
-};
-
-#define kretprobe_blacklist_size 0
-
-#define SLOT0_OPCODE_SHIFT	(37)
-#define SLOT1_p1_OPCODE_SHIFT	(37 - (64-46))
-#define SLOT2_OPCODE_SHIFT 	(37)
-
-#define INDIRECT_CALL_OPCODE		(1)
-#define IP_RELATIVE_CALL_OPCODE		(5)
-#define IP_RELATIVE_BRANCH_OPCODE	(4)
-#define IP_RELATIVE_PREDICT_OPCODE	(7)
-#define LONG_BRANCH_OPCODE		(0xC)
-#define LONG_CALL_OPCODE		(0xD)
-#define flush_insn_slot(p)		do { } while (0)
-
-typedef struct kprobe_opcode {
-	bundle_t bundle;
-} kprobe_opcode_t;
-
-struct fnptr {
-	unsigned long ip;
-	unsigned long gp;
-};
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
-	/* copy of the instruction to be emulated */
-	kprobe_opcode_t *insn;
- #define INST_FLAG_FIX_RELATIVE_IP_ADDR		1
- #define INST_FLAG_FIX_BRANCH_REG		2
- #define INST_FLAG_BREAK_INST			4
- #define INST_FLAG_BOOSTABLE			8
- 	unsigned long inst_flag;
- 	unsigned short target_br_reg;
-	unsigned short slot;
-};
-
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-				    unsigned long val, void *data);
-
-extern void invalidate_stacked_regs(void);
-extern void flush_register_stack(void);
-extern void arch_remove_kprobe(struct kprobe *p);
-
-#endif				/* _ASM_KPROBES_H */
diff --git a/include/asm-ia64/kregs.h b/include/asm-ia64/kregs.h
deleted file mode 100644
index aefcdfee7f23..000000000000
--- a/include/asm-ia64/kregs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef _ASM_IA64_KREGS_H
-#define _ASM_IA64_KREGS_H
-
-/*
- * Copyright (C) 2001-2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-/*
- * This file defines the kernel register usage convention used by Linux/ia64.
- */
-
-/*
- * Kernel registers:
- */
-#define IA64_KR_IO_BASE		0	/* ar.k0: legacy I/O base address */
-#define IA64_KR_TSSD		1	/* ar.k1: IVE uses this as the TSSD */
-#define IA64_KR_PER_CPU_DATA	3	/* ar.k3: physical per-CPU base */
-#define IA64_KR_CURRENT_STACK	4	/* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */
-#define IA64_KR_FPU_OWNER	5	/* ar.k5: fpu-owner (UP only, at the moment) */
-#define IA64_KR_CURRENT		6	/* ar.k6: "current" task pointer */
-#define IA64_KR_PT_BASE		7	/* ar.k7: page table base address (physical) */
-
-#define _IA64_KR_PASTE(x,y)	x##y
-#define _IA64_KR_PREFIX(n)	_IA64_KR_PASTE(ar.k, n)
-#define IA64_KR(n)		_IA64_KR_PREFIX(IA64_KR_##n)
-
-/*
- * Translation registers:
- */
-#define IA64_TR_KERNEL		0	/* itr0, dtr0: maps kernel image (code & data) */
-#define IA64_TR_PALCODE		1	/* itr1: maps PALcode as required by EFI */
-#define IA64_TR_CURRENT_STACK	1	/* dtr1: maps kernel's memory- & register-stacks */
-
-#define IA64_TR_ALLOC_BASE	2 	/* itr&dtr: Base of dynamic TR resource*/
-#define IA64_TR_ALLOC_MAX	32 	/* Max number for dynamic use*/
-
-/* Processor status register bits: */
-#define IA64_PSR_BE_BIT		1
-#define IA64_PSR_UP_BIT		2
-#define IA64_PSR_AC_BIT		3
-#define IA64_PSR_MFL_BIT	4
-#define IA64_PSR_MFH_BIT	5
-#define IA64_PSR_IC_BIT		13
-#define IA64_PSR_I_BIT		14
-#define IA64_PSR_PK_BIT		15
-#define IA64_PSR_DT_BIT		17
-#define IA64_PSR_DFL_BIT	18
-#define IA64_PSR_DFH_BIT	19
-#define IA64_PSR_SP_BIT		20
-#define IA64_PSR_PP_BIT		21
-#define IA64_PSR_DI_BIT		22
-#define IA64_PSR_SI_BIT		23
-#define IA64_PSR_DB_BIT		24
-#define IA64_PSR_LP_BIT		25
-#define IA64_PSR_TB_BIT		26
-#define IA64_PSR_RT_BIT		27
-/* The following are not affected by save_flags()/restore_flags(): */
-#define IA64_PSR_CPL0_BIT	32
-#define IA64_PSR_CPL1_BIT	33
-#define IA64_PSR_IS_BIT		34
-#define IA64_PSR_MC_BIT		35
-#define IA64_PSR_IT_BIT		36
-#define IA64_PSR_ID_BIT		37
-#define IA64_PSR_DA_BIT		38
-#define IA64_PSR_DD_BIT		39
-#define IA64_PSR_SS_BIT		40
-#define IA64_PSR_RI_BIT		41
-#define IA64_PSR_ED_BIT		43
-#define IA64_PSR_BN_BIT		44
-#define IA64_PSR_IA_BIT		45
-
-/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an
-   execve().  Only list flags here that need to be cleared/set for BOTH clone2() and
-   execve().  */
-#define IA64_PSR_BITS_TO_CLEAR	(IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \
-				 IA64_PSR_TB  | IA64_PSR_ID  | IA64_PSR_DA | IA64_PSR_DD | \
-				 IA64_PSR_SS  | IA64_PSR_ED  | IA64_PSR_IA)
-#define IA64_PSR_BITS_TO_SET	(IA64_PSR_DFH | IA64_PSR_SP)
-
-#define IA64_PSR_BE	(__IA64_UL(1) << IA64_PSR_BE_BIT)
-#define IA64_PSR_UP	(__IA64_UL(1) << IA64_PSR_UP_BIT)
-#define IA64_PSR_AC	(__IA64_UL(1) << IA64_PSR_AC_BIT)
-#define IA64_PSR_MFL	(__IA64_UL(1) << IA64_PSR_MFL_BIT)
-#define IA64_PSR_MFH	(__IA64_UL(1) << IA64_PSR_MFH_BIT)
-#define IA64_PSR_IC	(__IA64_UL(1) << IA64_PSR_IC_BIT)
-#define IA64_PSR_I	(__IA64_UL(1) << IA64_PSR_I_BIT)
-#define IA64_PSR_PK	(__IA64_UL(1) << IA64_PSR_PK_BIT)
-#define IA64_PSR_DT	(__IA64_UL(1) << IA64_PSR_DT_BIT)
-#define IA64_PSR_DFL	(__IA64_UL(1) << IA64_PSR_DFL_BIT)
-#define IA64_PSR_DFH	(__IA64_UL(1) << IA64_PSR_DFH_BIT)
-#define IA64_PSR_SP	(__IA64_UL(1) << IA64_PSR_SP_BIT)
-#define IA64_PSR_PP	(__IA64_UL(1) << IA64_PSR_PP_BIT)
-#define IA64_PSR_DI	(__IA64_UL(1) << IA64_PSR_DI_BIT)
-#define IA64_PSR_SI	(__IA64_UL(1) << IA64_PSR_SI_BIT)
-#define IA64_PSR_DB	(__IA64_UL(1) << IA64_PSR_DB_BIT)
-#define IA64_PSR_LP	(__IA64_UL(1) << IA64_PSR_LP_BIT)
-#define IA64_PSR_TB	(__IA64_UL(1) << IA64_PSR_TB_BIT)
-#define IA64_PSR_RT	(__IA64_UL(1) << IA64_PSR_RT_BIT)
-/* The following are not affected by save_flags()/restore_flags(): */
-#define IA64_PSR_CPL	(__IA64_UL(3) << IA64_PSR_CPL0_BIT)
-#define IA64_PSR_IS	(__IA64_UL(1) << IA64_PSR_IS_BIT)
-#define IA64_PSR_MC	(__IA64_UL(1) << IA64_PSR_MC_BIT)
-#define IA64_PSR_IT	(__IA64_UL(1) << IA64_PSR_IT_BIT)
-#define IA64_PSR_ID	(__IA64_UL(1) << IA64_PSR_ID_BIT)
-#define IA64_PSR_DA	(__IA64_UL(1) << IA64_PSR_DA_BIT)
-#define IA64_PSR_DD	(__IA64_UL(1) << IA64_PSR_DD_BIT)
-#define IA64_PSR_SS	(__IA64_UL(1) << IA64_PSR_SS_BIT)
-#define IA64_PSR_RI	(__IA64_UL(3) << IA64_PSR_RI_BIT)
-#define IA64_PSR_ED	(__IA64_UL(1) << IA64_PSR_ED_BIT)
-#define IA64_PSR_BN	(__IA64_UL(1) << IA64_PSR_BN_BIT)
-#define IA64_PSR_IA	(__IA64_UL(1) << IA64_PSR_IA_BIT)
-
-/* User mask bits: */
-#define IA64_PSR_UM	(IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH)
-
-/* Default Control Register */
-#define IA64_DCR_PP_BIT		 0	/* privileged performance monitor default */
-#define IA64_DCR_BE_BIT		 1	/* big-endian default */
-#define IA64_DCR_LC_BIT		 2	/* ia32 lock-check enable */
-#define IA64_DCR_DM_BIT		 8	/* defer TLB miss faults */
-#define IA64_DCR_DP_BIT		 9	/* defer page-not-present faults */
-#define IA64_DCR_DK_BIT		10	/* defer key miss faults */
-#define IA64_DCR_DX_BIT		11	/* defer key permission faults */
-#define IA64_DCR_DR_BIT		12	/* defer access right faults */
-#define IA64_DCR_DA_BIT		13	/* defer access bit faults */
-#define IA64_DCR_DD_BIT		14	/* defer debug faults */
-
-#define IA64_DCR_PP	(__IA64_UL(1) << IA64_DCR_PP_BIT)
-#define IA64_DCR_BE	(__IA64_UL(1) << IA64_DCR_BE_BIT)
-#define IA64_DCR_LC	(__IA64_UL(1) << IA64_DCR_LC_BIT)
-#define IA64_DCR_DM	(__IA64_UL(1) << IA64_DCR_DM_BIT)
-#define IA64_DCR_DP	(__IA64_UL(1) << IA64_DCR_DP_BIT)
-#define IA64_DCR_DK	(__IA64_UL(1) << IA64_DCR_DK_BIT)
-#define IA64_DCR_DX	(__IA64_UL(1) << IA64_DCR_DX_BIT)
-#define IA64_DCR_DR	(__IA64_UL(1) << IA64_DCR_DR_BIT)
-#define IA64_DCR_DA	(__IA64_UL(1) << IA64_DCR_DA_BIT)
-#define IA64_DCR_DD	(__IA64_UL(1) << IA64_DCR_DD_BIT)
-
-/* Interrupt Status Register */
-#define IA64_ISR_X_BIT		32	/* execute access */
-#define IA64_ISR_W_BIT		33	/* write access */
-#define IA64_ISR_R_BIT		34	/* read access */
-#define IA64_ISR_NA_BIT		35	/* non-access */
-#define IA64_ISR_SP_BIT		36	/* speculative load exception */
-#define IA64_ISR_RS_BIT		37	/* mandatory register-stack exception */
-#define IA64_ISR_IR_BIT		38	/* invalid register frame exception */
-#define IA64_ISR_CODE_MASK	0xf
-
-#define IA64_ISR_X	(__IA64_UL(1) << IA64_ISR_X_BIT)
-#define IA64_ISR_W	(__IA64_UL(1) << IA64_ISR_W_BIT)
-#define IA64_ISR_R	(__IA64_UL(1) << IA64_ISR_R_BIT)
-#define IA64_ISR_NA	(__IA64_UL(1) << IA64_ISR_NA_BIT)
-#define IA64_ISR_SP	(__IA64_UL(1) << IA64_ISR_SP_BIT)
-#define IA64_ISR_RS	(__IA64_UL(1) << IA64_ISR_RS_BIT)
-#define IA64_ISR_IR	(__IA64_UL(1) << IA64_ISR_IR_BIT)
-
-/* ISR code field for non-access instructions */
-#define IA64_ISR_CODE_TPA	0
-#define IA64_ISR_CODE_FC	1
-#define IA64_ISR_CODE_PROBE	2
-#define IA64_ISR_CODE_TAK	3
-#define IA64_ISR_CODE_LFETCH	4
-#define IA64_ISR_CODE_PROBEF	5
-
-#endif /* _ASM_IA64_kREGS_H */
diff --git a/include/asm-ia64/kvm.h b/include/asm-ia64/kvm.h
deleted file mode 100644
index 3f6a090cbd9a..000000000000
--- a/include/asm-ia64/kvm.h
+++ /dev/null
@@ -1,211 +0,0 @@
-#ifndef __ASM_IA64_KVM_H
-#define __ASM_IA64_KVM_H
-
-/*
- * asm-ia64/kvm.h: kvm structure definitions  for ia64
- *
- * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#include <asm/types.h>
-
-#include <linux/ioctl.h>
-
-/* Architectural interrupt line count. */
-#define KVM_NR_INTERRUPTS 256
-
-#define KVM_IOAPIC_NUM_PINS  48
-
-struct kvm_ioapic_state {
-	__u64 base_address;
-	__u32 ioregsel;
-	__u32 id;
-	__u32 irr;
-	__u32 pad;
-	union {
-		__u64 bits;
-		struct {
-			__u8 vector;
-			__u8 delivery_mode:3;
-			__u8 dest_mode:1;
-			__u8 delivery_status:1;
-			__u8 polarity:1;
-			__u8 remote_irr:1;
-			__u8 trig_mode:1;
-			__u8 mask:1;
-			__u8 reserve:7;
-			__u8 reserved[4];
-			__u8 dest_id;
-		} fields;
-	} redirtbl[KVM_IOAPIC_NUM_PINS];
-};
-
-#define KVM_IRQCHIP_PIC_MASTER   0
-#define KVM_IRQCHIP_PIC_SLAVE    1
-#define KVM_IRQCHIP_IOAPIC       2
-
-#define KVM_CONTEXT_SIZE	8*1024
-
-struct kvm_fpreg {
-	union {
-		unsigned long bits[2];
-		long double __dummy;	/* force 16-byte alignment */
-	} u;
-};
-
-union context {
-	/* 8K size */
-	char	dummy[KVM_CONTEXT_SIZE];
-	struct {
-		unsigned long       psr;
-		unsigned long       pr;
-		unsigned long       caller_unat;
-		unsigned long       pad;
-		unsigned long       gr[32];
-		unsigned long       ar[128];
-		unsigned long       br[8];
-		unsigned long       cr[128];
-		unsigned long       rr[8];
-		unsigned long       ibr[8];
-		unsigned long       dbr[8];
-		unsigned long       pkr[8];
-		struct kvm_fpreg   fr[128];
-	};
-};
-
-struct thash_data {
-	union {
-		struct {
-			unsigned long p    :  1; /* 0 */
-			unsigned long rv1  :  1; /* 1 */
-			unsigned long ma   :  3; /* 2-4 */
-			unsigned long a    :  1; /* 5 */
-			unsigned long d    :  1; /* 6 */
-			unsigned long pl   :  2; /* 7-8 */
-			unsigned long ar   :  3; /* 9-11 */
-			unsigned long ppn  : 38; /* 12-49 */
-			unsigned long rv2  :  2; /* 50-51 */
-			unsigned long ed   :  1; /* 52 */
-			unsigned long ig1  : 11; /* 53-63 */
-		};
-		struct {
-			unsigned long __rv1 : 53;     /* 0-52 */
-			unsigned long contiguous : 1; /*53 */
-			unsigned long tc : 1;         /* 54 TR or TC */
-			unsigned long cl : 1;
-			/* 55 I side or D side cache line */
-			unsigned long len  :  4;      /* 56-59 */
-			unsigned long io  : 1;	/* 60 entry is for io or not */
-			unsigned long nomap : 1;
-			/* 61 entry cann't be inserted into machine TLB.*/
-			unsigned long checked : 1;
-			/* 62 for VTLB/VHPT sanity check */
-			unsigned long invalid : 1;
-			/* 63 invalid entry */
-		};
-		unsigned long page_flags;
-	};                  /* same for VHPT and TLB */
-
-	union {
-		struct {
-			unsigned long rv3  :  2;
-			unsigned long ps   :  6;
-			unsigned long key  : 24;
-			unsigned long rv4  : 32;
-		};
-		unsigned long itir;
-	};
-	union {
-		struct {
-			unsigned long ig2  :  12;
-			unsigned long vpn  :  49;
-			unsigned long vrn  :   3;
-		};
-		unsigned long ifa;
-		unsigned long vadr;
-		struct {
-			unsigned long tag  :  63;
-			unsigned long ti   :  1;
-		};
-		unsigned long etag;
-	};
-	union {
-		struct thash_data *next;
-		unsigned long rid;
-		unsigned long gpaddr;
-	};
-};
-
-#define	NITRS	8
-#define NDTRS	8
-
-struct saved_vpd {
-	unsigned long  vhpi;
-	unsigned long  vgr[16];
-	unsigned long  vbgr[16];
-	unsigned long  vnat;
-	unsigned long  vbnat;
-	unsigned long  vcpuid[5];
-	unsigned long  vpsr;
-	unsigned long  vpr;
-	unsigned long  vcr[128];
-};
-
-struct kvm_regs {
-	char *saved_guest;
-	char *saved_stack;
-	struct saved_vpd vpd;
-	/*Arch-regs*/
-	int mp_state;
-	unsigned long vmm_rr;
-	/* TR and TC.  */
-	struct thash_data itrs[NITRS];
-	struct thash_data dtrs[NDTRS];
-	/* Bit is set if there is a tr/tc for the region.  */
-	unsigned char itr_regions;
-	unsigned char dtr_regions;
-	unsigned char tc_regions;
-
-	char irq_check;
-	unsigned long saved_itc;
-	unsigned long itc_check;
-	unsigned long timer_check;
-	unsigned long timer_pending;
-	unsigned long last_itc;
-
-	unsigned long vrr[8];
-	unsigned long ibr[8];
-	unsigned long dbr[8];
-	unsigned long insvc[4];		/* Interrupt in service.  */
-	unsigned long xtp;
-
-	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
-	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
-	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
-	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
-	unsigned long fp_psr;       /*used for lazy float register */
-	unsigned long saved_gp;
-	/*for phycial  emulation */
-};
-
-struct kvm_sregs {
-};
-
-struct kvm_fpu {
-};
-
-#endif
diff --git a/include/asm-ia64/kvm_host.h b/include/asm-ia64/kvm_host.h
deleted file mode 100644
index c082c208c1f3..000000000000
--- a/include/asm-ia64/kvm_host.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * kvm_host.h: used for kvm module, and hold ia64-specific sections.
- *
- * Copyright (C) 2007, Intel Corporation.
- *
- * Xiantao Zhang <xiantao.zhang@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#ifndef __ASM_KVM_HOST_H
-#define __ASM_KVM_HOST_H
-
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/kvm.h>
-#include <linux/kvm_para.h>
-#include <linux/kvm_types.h>
-
-#include <asm/pal.h>
-#include <asm/sal.h>
-
-#define KVM_MAX_VCPUS 4
-#define KVM_MEMORY_SLOTS 32
-/* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS 4
-
-
-/* define exit reasons from vmm to kvm*/
-#define EXIT_REASON_VM_PANIC		0
-#define EXIT_REASON_MMIO_INSTRUCTION	1
-#define EXIT_REASON_PAL_CALL		2
-#define EXIT_REASON_SAL_CALL		3
-#define EXIT_REASON_SWITCH_RR6		4
-#define EXIT_REASON_VM_DESTROY		5
-#define EXIT_REASON_EXTERNAL_INTERRUPT	6
-#define EXIT_REASON_IPI			7
-#define EXIT_REASON_PTC_G		8
-
-/*Define vmm address space and vm data space.*/
-#define KVM_VMM_SIZE (16UL<<20)
-#define KVM_VMM_SHIFT 24
-#define KVM_VMM_BASE 0xD000000000000000UL
-#define VMM_SIZE (8UL<<20)
-
-/*
- * Define vm_buffer, used by PAL Services, base address.
- * Note: vmbuffer is in the VMM-BLOCK, the size must be < 8M
- */
-#define KVM_VM_BUFFER_BASE (KVM_VMM_BASE + VMM_SIZE)
-#define KVM_VM_BUFFER_SIZE (8UL<<20)
-
-/*Define Virtual machine data layout.*/
-#define KVM_VM_DATA_SHIFT  24
-#define KVM_VM_DATA_SIZE (1UL << KVM_VM_DATA_SHIFT)
-#define KVM_VM_DATA_BASE (KVM_VMM_BASE + KVM_VMM_SIZE)
-
-
-#define KVM_P2M_BASE    KVM_VM_DATA_BASE
-#define KVM_P2M_OFS     0
-#define KVM_P2M_SIZE    (8UL << 20)
-
-#define KVM_VHPT_BASE   (KVM_P2M_BASE + KVM_P2M_SIZE)
-#define KVM_VHPT_OFS    KVM_P2M_SIZE
-#define KVM_VHPT_BLOCK_SIZE   (2UL << 20)
-#define VHPT_SHIFT      18
-#define VHPT_SIZE       (1UL << VHPT_SHIFT)
-#define VHPT_NUM_ENTRIES (1<<(VHPT_SHIFT-5))
-
-#define KVM_VTLB_BASE   (KVM_VHPT_BASE+KVM_VHPT_BLOCK_SIZE)
-#define KVM_VTLB_OFS    (KVM_VHPT_OFS+KVM_VHPT_BLOCK_SIZE)
-#define KVM_VTLB_BLOCK_SIZE   (1UL<<20)
-#define VTLB_SHIFT      17
-#define VTLB_SIZE       (1UL<<VTLB_SHIFT)
-#define VTLB_NUM_ENTRIES (1<<(VTLB_SHIFT-5))
-
-#define KVM_VPD_BASE   (KVM_VTLB_BASE+KVM_VTLB_BLOCK_SIZE)
-#define KVM_VPD_OFS    (KVM_VTLB_OFS+KVM_VTLB_BLOCK_SIZE)
-#define KVM_VPD_BLOCK_SIZE   (2UL<<20)
-#define VPD_SHIFT       16
-#define VPD_SIZE        (1UL<<VPD_SHIFT)
-
-#define KVM_VCPU_BASE   (KVM_VPD_BASE+KVM_VPD_BLOCK_SIZE)
-#define KVM_VCPU_OFS    (KVM_VPD_OFS+KVM_VPD_BLOCK_SIZE)
-#define KVM_VCPU_BLOCK_SIZE   (2UL<<20)
-#define VCPU_SHIFT 18
-#define VCPU_SIZE (1UL<<VCPU_SHIFT)
-#define MAX_VCPU_NUM KVM_VCPU_BLOCK_SIZE/VCPU_SIZE
-
-#define KVM_VM_BASE     (KVM_VCPU_BASE+KVM_VCPU_BLOCK_SIZE)
-#define KVM_VM_OFS      (KVM_VCPU_OFS+KVM_VCPU_BLOCK_SIZE)
-#define KVM_VM_BLOCK_SIZE     (1UL<<19)
-
-#define KVM_MEM_DIRTY_LOG_BASE (KVM_VM_BASE+KVM_VM_BLOCK_SIZE)
-#define KVM_MEM_DIRTY_LOG_OFS  (KVM_VM_OFS+KVM_VM_BLOCK_SIZE)
-#define KVM_MEM_DIRTY_LOG_SIZE (1UL<<19)
-
-/* Get vpd, vhpt, tlb, vcpu, base*/
-#define VPD_ADDR(n) (KVM_VPD_BASE+n*VPD_SIZE)
-#define VHPT_ADDR(n) (KVM_VHPT_BASE+n*VHPT_SIZE)
-#define VTLB_ADDR(n) (KVM_VTLB_BASE+n*VTLB_SIZE)
-#define VCPU_ADDR(n) (KVM_VCPU_BASE+n*VCPU_SIZE)
-
-/*IO section definitions*/
-#define IOREQ_READ      1
-#define IOREQ_WRITE     0
-
-#define STATE_IOREQ_NONE        0
-#define STATE_IOREQ_READY       1
-#define STATE_IOREQ_INPROCESS   2
-#define STATE_IORESP_READY      3
-
-/*Guest Physical address layout.*/
-#define GPFN_MEM        (0UL << 60) /* Guest pfn is normal mem */
-#define GPFN_FRAME_BUFFER   (1UL << 60) /* VGA framebuffer */
-#define GPFN_LOW_MMIO       (2UL << 60) /* Low MMIO range */
-#define GPFN_PIB        (3UL << 60) /* PIB base */
-#define GPFN_IOSAPIC        (4UL << 60) /* IOSAPIC base */
-#define GPFN_LEGACY_IO      (5UL << 60) /* Legacy I/O base */
-#define GPFN_GFW        (6UL << 60) /* Guest Firmware */
-#define GPFN_HIGH_MMIO      (7UL << 60) /* High MMIO range */
-
-#define GPFN_IO_MASK        (7UL << 60) /* Guest pfn is I/O type */
-#define GPFN_INV_MASK       (1UL << 63) /* Guest pfn is invalid */
-#define INVALID_MFN       (~0UL)
-#define MEM_G   (1UL << 30)
-#define MEM_M   (1UL << 20)
-#define MMIO_START       (3 * MEM_G)
-#define MMIO_SIZE        (512 * MEM_M)
-#define VGA_IO_START     0xA0000UL
-#define VGA_IO_SIZE      0x20000
-#define LEGACY_IO_START  (MMIO_START + MMIO_SIZE)
-#define LEGACY_IO_SIZE   (64 * MEM_M)
-#define IO_SAPIC_START   0xfec00000UL
-#define IO_SAPIC_SIZE    0x100000
-#define PIB_START 0xfee00000UL
-#define PIB_SIZE 0x200000
-#define GFW_START        (4 * MEM_G - 16 * MEM_M)
-#define GFW_SIZE         (16 * MEM_M)
-
-/*Deliver mode, defined for ioapic.c*/
-#define dest_Fixed IOSAPIC_FIXED
-#define dest_LowestPrio IOSAPIC_LOWEST_PRIORITY
-
-#define NMI_VECTOR      		2
-#define ExtINT_VECTOR       		0
-#define NULL_VECTOR     		(-1)
-#define IA64_SPURIOUS_INT_VECTOR    	0x0f
-
-#define VCPU_LID(v) (((u64)(v)->vcpu_id) << 24)
-
-/*
- *Delivery mode
- */
-#define SAPIC_DELIV_SHIFT      8
-#define SAPIC_FIXED            0x0
-#define SAPIC_LOWEST_PRIORITY  0x1
-#define SAPIC_PMI              0x2
-#define SAPIC_NMI              0x4
-#define SAPIC_INIT             0x5
-#define SAPIC_EXTINT           0x7
-
-/*
- * vcpu->requests bit members for arch
- */
-#define KVM_REQ_PTC_G		32
-#define KVM_REQ_RESUME		33
-
-#define KVM_PAGES_PER_HPAGE	1
-
-struct kvm;
-struct kvm_vcpu;
-struct kvm_guest_debug{
-};
-
-struct kvm_mmio_req {
-	uint64_t addr;          /*  physical address		*/
-	uint64_t size;          /*  size in bytes		*/
-	uint64_t data;          /*  data (or paddr of data)     */
-	uint8_t state:4;
-	uint8_t dir:1;          /*  1=read, 0=write             */
-};
-
-/*Pal data struct */
-struct kvm_pal_call{
-	/*In area*/
-	uint64_t gr28;
-	uint64_t gr29;
-	uint64_t gr30;
-	uint64_t gr31;
-	/*Out area*/
-	struct ia64_pal_retval ret;
-};
-
-/* Sal data structure */
-struct kvm_sal_call{
-	/*In area*/
-	uint64_t in0;
-	uint64_t in1;
-	uint64_t in2;
-	uint64_t in3;
-	uint64_t in4;
-	uint64_t in5;
-	uint64_t in6;
-	uint64_t in7;
-	struct sal_ret_values ret;
-};
-
-/*Guest change rr6*/
-struct kvm_switch_rr6 {
-	uint64_t old_rr;
-	uint64_t new_rr;
-};
-
-union ia64_ipi_a{
-	unsigned long val;
-	struct {
-		unsigned long rv  : 3;
-		unsigned long ir  : 1;
-		unsigned long eid : 8;
-		unsigned long id  : 8;
-		unsigned long ib_base : 44;
-	};
-};
-
-union ia64_ipi_d {
-	unsigned long val;
-	struct {
-		unsigned long vector : 8;
-		unsigned long dm  : 3;
-		unsigned long ig  : 53;
-	};
-};
-
-/*ipi check exit data*/
-struct kvm_ipi_data{
-	union ia64_ipi_a addr;
-	union ia64_ipi_d data;
-};
-
-/*global purge data*/
-struct kvm_ptc_g {
-	unsigned long vaddr;
-	unsigned long rr;
-	unsigned long ps;
-	struct kvm_vcpu *vcpu;
-};
-
-/*Exit control data */
-struct exit_ctl_data{
-	uint32_t exit_reason;
-	uint32_t vm_status;
-	union {
-		struct kvm_mmio_req	ioreq;
-		struct kvm_pal_call	pal_data;
-		struct kvm_sal_call	sal_data;
-		struct kvm_switch_rr6	rr_data;
-		struct kvm_ipi_data	ipi_data;
-		struct kvm_ptc_g	ptc_g_data;
-	} u;
-};
-
-union pte_flags {
-	unsigned long val;
-	struct {
-		unsigned long p    :  1; /*0      */
-		unsigned long      :  1; /* 1     */
-		unsigned long ma   :  3; /* 2-4   */
-		unsigned long a    :  1; /* 5     */
-		unsigned long d    :  1; /* 6     */
-		unsigned long pl   :  2; /* 7-8   */
-		unsigned long ar   :  3; /* 9-11  */
-		unsigned long ppn  : 38; /* 12-49 */
-		unsigned long      :  2; /* 50-51 */
-		unsigned long ed   :  1; /* 52    */
-	};
-};
-
-union ia64_pta {
-	unsigned long val;
-	struct {
-		unsigned long ve : 1;
-		unsigned long reserved0 : 1;
-		unsigned long size : 6;
-		unsigned long vf : 1;
-		unsigned long reserved1 : 6;
-		unsigned long base : 49;
-	};
-};
-
-struct thash_cb {
-	/* THASH base information */
-	struct thash_data	*hash; /* hash table pointer */
-	union ia64_pta		pta;
-	int           num;
-};
-
-struct kvm_vcpu_stat {
-};
-
-struct kvm_vcpu_arch {
-	int launched;
-	int last_exit;
-	int last_run_cpu;
-	int vmm_tr_slot;
-	int vm_tr_slot;
-
-#define KVM_MP_STATE_RUNNABLE          0
-#define KVM_MP_STATE_UNINITIALIZED     1
-#define KVM_MP_STATE_INIT_RECEIVED     2
-#define KVM_MP_STATE_HALTED            3
-	int mp_state;
-
-#define MAX_PTC_G_NUM			3
-	int ptc_g_count;
-	struct kvm_ptc_g ptc_g_data[MAX_PTC_G_NUM];
-
-	/*halt timer to wake up sleepy vcpus*/
-	struct hrtimer hlt_timer;
-	long ht_active;
-
-	struct kvm_lapic *apic;    /* kernel irqchip context */
-	struct vpd *vpd;
-
-	/* Exit data for vmm_transition*/
-	struct exit_ctl_data exit_data;
-
-	cpumask_t cache_coherent_map;
-
-	unsigned long vmm_rr;
-	unsigned long host_rr6;
-	unsigned long psbits[8];
-	unsigned long cr_iipa;
-	unsigned long cr_isr;
-	unsigned long vsa_base;
-	unsigned long dirty_log_lock_pa;
-	unsigned long __gp;
-	/* TR and TC.  */
-	struct thash_data itrs[NITRS];
-	struct thash_data dtrs[NDTRS];
-	/* Bit is set if there is a tr/tc for the region.  */
-	unsigned char itr_regions;
-	unsigned char dtr_regions;
-	unsigned char tc_regions;
-	/* purge all */
-	unsigned long ptce_base;
-	unsigned long ptce_count[2];
-	unsigned long ptce_stride[2];
-	/* itc/itm */
-	unsigned long last_itc;
-	long itc_offset;
-	unsigned long itc_check;
-	unsigned long timer_check;
-	unsigned long timer_pending;
-
-	unsigned long vrr[8];
-	unsigned long ibr[8];
-	unsigned long dbr[8];
-	unsigned long insvc[4];		/* Interrupt in service.  */
-	unsigned long xtp;
-
-	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
-	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
-	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
-	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
-	unsigned long fp_psr;       /*used for lazy float register */
-	unsigned long saved_gp;
-	/*for phycial  emulation */
-	int mode_flags;
-	struct thash_cb vtlb;
-	struct thash_cb vhpt;
-	char irq_check;
-	char irq_new_pending;
-
-	unsigned long opcode;
-	unsigned long cause;
-	union context host;
-	union context guest;
-};
-
-struct kvm_vm_stat {
-	u64 remote_tlb_flush;
-};
-
-struct kvm_sal_data {
-	unsigned long boot_ip;
-	unsigned long boot_gp;
-};
-
-struct kvm_arch {
-	unsigned long	vm_base;
-	unsigned long	metaphysical_rr0;
-	unsigned long	metaphysical_rr4;
-	unsigned long	vmm_init_rr;
-	unsigned long	vhpt_base;
-	unsigned long	vtlb_base;
-	unsigned long 	vpd_base;
-	spinlock_t dirty_log_lock;
-	struct kvm_ioapic *vioapic;
-	struct kvm_vm_stat stat;
-	struct kvm_sal_data rdv_sal_data;
-};
-
-union cpuid3_t {
-	u64 value;
-	struct {
-		u64 number : 8;
-		u64 revision : 8;
-		u64 model : 8;
-		u64 family : 8;
-		u64 archrev : 8;
-		u64 rv : 24;
-	};
-};
-
-struct kvm_pt_regs {
-	/* The following registers are saved by SAVE_MIN: */
-	unsigned long b6;  /* scratch */
-	unsigned long b7;  /* scratch */
-
-	unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */
-	unsigned long ar_ssd; /* reserved for future use (scratch) */
-
-	unsigned long r8;  /* scratch (return value register 0) */
-	unsigned long r9;  /* scratch (return value register 1) */
-	unsigned long r10; /* scratch (return value register 2) */
-	unsigned long r11; /* scratch (return value register 3) */
-
-	unsigned long cr_ipsr; /* interrupted task's psr */
-	unsigned long cr_iip;  /* interrupted task's instruction pointer */
-	unsigned long cr_ifs;  /* interrupted task's function state */
-
-	unsigned long ar_unat; /* interrupted task's NaT register (preserved) */
-	unsigned long ar_pfs;  /* prev function state  */
-	unsigned long ar_rsc;  /* RSE configuration */
-	/* The following two are valid only if cr_ipsr.cpl > 0: */
-	unsigned long ar_rnat;  /* RSE NaT */
-	unsigned long ar_bspstore; /* RSE bspstore */
-
-	unsigned long pr;  /* 64 predicate registers (1 bit each) */
-	unsigned long b0;  /* return pointer (bp) */
-	unsigned long loadrs;  /* size of dirty partition << 16 */
-
-	unsigned long r1;  /* the gp pointer */
-	unsigned long r12; /* interrupted task's memory stack pointer */
-	unsigned long r13; /* thread pointer */
-
-	unsigned long ar_fpsr;  /* floating point status (preserved) */
-	unsigned long r15;  /* scratch */
-
-	/* The remaining registers are NOT saved for system calls.  */
-	unsigned long r14;  /* scratch */
-	unsigned long r2;  /* scratch */
-	unsigned long r3;  /* scratch */
-	unsigned long r16;  /* scratch */
-	unsigned long r17;  /* scratch */
-	unsigned long r18;  /* scratch */
-	unsigned long r19;  /* scratch */
-	unsigned long r20;  /* scratch */
-	unsigned long r21;  /* scratch */
-	unsigned long r22;  /* scratch */
-	unsigned long r23;  /* scratch */
-	unsigned long r24;  /* scratch */
-	unsigned long r25;  /* scratch */
-	unsigned long r26;  /* scratch */
-	unsigned long r27;  /* scratch */
-	unsigned long r28;  /* scratch */
-	unsigned long r29;  /* scratch */
-	unsigned long r30;  /* scratch */
-	unsigned long r31;  /* scratch */
-	unsigned long ar_ccv;  /* compare/exchange value (scratch) */
-
-	/*
-	 * Floating point registers that the kernel considers scratch:
-	 */
-	struct ia64_fpreg f6;  /* scratch */
-	struct ia64_fpreg f7;  /* scratch */
-	struct ia64_fpreg f8;  /* scratch */
-	struct ia64_fpreg f9;  /* scratch */
-	struct ia64_fpreg f10;  /* scratch */
-	struct ia64_fpreg f11;  /* scratch */
-
-	unsigned long r4;  /* preserved */
-	unsigned long r5;  /* preserved */
-	unsigned long r6;  /* preserved */
-	unsigned long r7;  /* preserved */
-	unsigned long eml_unat;    /* used for emulating instruction */
-	unsigned long pad0;     /* alignment pad */
-};
-
-static inline struct kvm_pt_regs *vcpu_regs(struct kvm_vcpu *v)
-{
-	return (struct kvm_pt_regs *) ((unsigned long) v + IA64_STK_OFFSET) - 1;
-}
-
-typedef int kvm_vmm_entry(void);
-typedef void kvm_tramp_entry(union context *host, union context *guest);
-
-struct kvm_vmm_info{
-	struct module	*module;
-	kvm_vmm_entry 	*vmm_entry;
-	kvm_tramp_entry *tramp_entry;
-	unsigned long 	vmm_ivt;
-};
-
-int kvm_highest_pending_irq(struct kvm_vcpu *vcpu);
-int kvm_emulate_halt(struct kvm_vcpu *vcpu);
-int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
-void kvm_sal_emul(struct kvm_vcpu *vcpu);
-
-#endif
diff --git a/include/asm-ia64/kvm_para.h b/include/asm-ia64/kvm_para.h
deleted file mode 100644
index 9f9796bb3441..000000000000
--- a/include/asm-ia64/kvm_para.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __IA64_KVM_PARA_H
-#define __IA64_KVM_PARA_H
-
-/*
- * asm-ia64/kvm_para.h
- *
- * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-static inline unsigned int kvm_arch_para_features(void)
-{
-	return 0;
-}
-
-#endif
diff --git a/include/asm-ia64/libata-portmap.h b/include/asm-ia64/libata-portmap.h
deleted file mode 100644
index 0e00c9a9f410..000000000000
--- a/include/asm-ia64/libata-portmap.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ASM_IA64_LIBATA_PORTMAP_H
-#define __ASM_IA64_LIBATA_PORTMAP_H
-
-#define ATA_PRIMARY_CMD		0x1F0
-#define ATA_PRIMARY_CTL		0x3F6
-#define ATA_PRIMARY_IRQ(dev)	isa_irq_to_vector(14)
-
-#define ATA_SECONDARY_CMD	0x170
-#define ATA_SECONDARY_CTL	0x376
-#define ATA_SECONDARY_IRQ(dev)	isa_irq_to_vector(15)
-
-#endif
diff --git a/include/asm-ia64/linkage.h b/include/asm-ia64/linkage.h
deleted file mode 100644
index ef22a45c1890..000000000000
--- a/include/asm-ia64/linkage.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#ifndef __ASSEMBLY__
-
-#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage))
-
-#else
-
-#include <asm/asmmacro.h>
-
-#endif
-
-#endif
diff --git a/include/asm-ia64/local.h b/include/asm-ia64/local.h
deleted file mode 100644
index c11c530f74d0..000000000000
--- a/include/asm-ia64/local.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local.h>
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
deleted file mode 100644
index 0721a5e8271e..000000000000
--- a/include/asm-ia64/machvec.h
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Machine vector for IA-64.
- *
- * Copyright (C) 1999 Silicon Graphics, Inc.
- * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
- * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
- * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co.
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-#ifndef _ASM_IA64_MACHVEC_H
-#define _ASM_IA64_MACHVEC_H
-
-#include <linux/types.h>
-
-/* forward declarations: */
-struct device;
-struct pt_regs;
-struct scatterlist;
-struct page;
-struct mm_struct;
-struct pci_bus;
-struct task_struct;
-struct pci_dev;
-struct msi_desc;
-struct dma_attrs;
-
-typedef void ia64_mv_setup_t (char **);
-typedef void ia64_mv_cpu_init_t (void);
-typedef void ia64_mv_irq_init_t (void);
-typedef void ia64_mv_send_ipi_t (int, int, int, int);
-typedef void ia64_mv_timer_interrupt_t (int, void *);
-typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long);
-typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
-typedef u8 ia64_mv_irq_to_vector (int);
-typedef unsigned int ia64_mv_local_vector_to_irq (u8);
-typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
-typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val,
-				       u8 size);
-typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val,
-					u8 size);
-typedef void ia64_mv_migrate_t(struct task_struct * task);
-typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *);
-typedef void ia64_mv_kernel_launch_event_t(void);
-
-/* DMA-mapping interface: */
-typedef void ia64_mv_dma_init (void);
-typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, gfp_t);
-typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t);
-typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int);
-typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int);
-typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int);
-typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int);
-typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int);
-typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
-typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
-typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
-typedef int ia64_mv_dma_mapping_error (dma_addr_t dma_addr);
-typedef int ia64_mv_dma_supported (struct device *, u64);
-
-typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t, int, struct dma_attrs *);
-typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *);
-typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
-typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
-
-/*
- * WARNING: The legacy I/O space is _architected_.  Platforms are
- * expected to follow this architected model (see Section 10.7 in the
- * IA-64 Architecture Software Developer's Manual).  Unfortunately,
- * some broken machines do not follow that model, which is why we have
- * to make the inX/outX operations part of the machine vector.
- * Platform designers should follow the architected model whenever
- * possible.
- */
-typedef unsigned int ia64_mv_inb_t (unsigned long);
-typedef unsigned int ia64_mv_inw_t (unsigned long);
-typedef unsigned int ia64_mv_inl_t (unsigned long);
-typedef void ia64_mv_outb_t (unsigned char, unsigned long);
-typedef void ia64_mv_outw_t (unsigned short, unsigned long);
-typedef void ia64_mv_outl_t (unsigned int, unsigned long);
-typedef void ia64_mv_mmiowb_t (void);
-typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *);
-typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *);
-typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *);
-typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *);
-typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *);
-typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *);
-typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *);
-typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *);
-
-typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *);
-typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq);
-
-static inline void
-machvec_noop (void)
-{
-}
-
-static inline void
-machvec_noop_mm (struct mm_struct *mm)
-{
-}
-
-static inline void
-machvec_noop_task (struct task_struct *task)
-{
-}
-
-static inline void
-machvec_noop_bus (struct pci_bus *bus)
-{
-}
-
-extern void machvec_setup (char **);
-extern void machvec_timer_interrupt (int, void *);
-extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
-extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int);
-extern void machvec_tlb_migrate_finish (struct mm_struct *);
-
-# if defined (CONFIG_IA64_HP_SIM)
-#  include <asm/machvec_hpsim.h>
-# elif defined (CONFIG_IA64_DIG)
-#  include <asm/machvec_dig.h>
-# elif defined (CONFIG_IA64_HP_ZX1)
-#  include <asm/machvec_hpzx1.h>
-# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
-#  include <asm/machvec_hpzx1_swiotlb.h>
-# elif defined (CONFIG_IA64_SGI_SN2)
-#  include <asm/machvec_sn2.h>
-# elif defined (CONFIG_IA64_SGI_UV)
-#  include <asm/machvec_uv.h>
-# elif defined (CONFIG_IA64_GENERIC)
-
-# ifdef MACHVEC_PLATFORM_HEADER
-#  include MACHVEC_PLATFORM_HEADER
-# else
-#  define platform_name		ia64_mv.name
-#  define platform_setup	ia64_mv.setup
-#  define platform_cpu_init	ia64_mv.cpu_init
-#  define platform_irq_init	ia64_mv.irq_init
-#  define platform_send_ipi	ia64_mv.send_ipi
-#  define platform_timer_interrupt	ia64_mv.timer_interrupt
-#  define platform_global_tlb_purge	ia64_mv.global_tlb_purge
-#  define platform_tlb_migrate_finish	ia64_mv.tlb_migrate_finish
-#  define platform_dma_init		ia64_mv.dma_init
-#  define platform_dma_alloc_coherent	ia64_mv.dma_alloc_coherent
-#  define platform_dma_free_coherent	ia64_mv.dma_free_coherent
-#  define platform_dma_map_single_attrs	ia64_mv.dma_map_single_attrs
-#  define platform_dma_unmap_single_attrs	ia64_mv.dma_unmap_single_attrs
-#  define platform_dma_map_sg_attrs	ia64_mv.dma_map_sg_attrs
-#  define platform_dma_unmap_sg_attrs	ia64_mv.dma_unmap_sg_attrs
-#  define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu
-#  define platform_dma_sync_sg_for_cpu	ia64_mv.dma_sync_sg_for_cpu
-#  define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device
-#  define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
-#  define platform_dma_mapping_error		ia64_mv.dma_mapping_error
-#  define platform_dma_supported	ia64_mv.dma_supported
-#  define platform_irq_to_vector	ia64_mv.irq_to_vector
-#  define platform_local_vector_to_irq	ia64_mv.local_vector_to_irq
-#  define platform_pci_get_legacy_mem	ia64_mv.pci_get_legacy_mem
-#  define platform_pci_legacy_read	ia64_mv.pci_legacy_read
-#  define platform_pci_legacy_write	ia64_mv.pci_legacy_write
-#  define platform_inb		ia64_mv.inb
-#  define platform_inw		ia64_mv.inw
-#  define platform_inl		ia64_mv.inl
-#  define platform_outb		ia64_mv.outb
-#  define platform_outw		ia64_mv.outw
-#  define platform_outl		ia64_mv.outl
-#  define platform_mmiowb	ia64_mv.mmiowb
-#  define platform_readb        ia64_mv.readb
-#  define platform_readw        ia64_mv.readw
-#  define platform_readl        ia64_mv.readl
-#  define platform_readq        ia64_mv.readq
-#  define platform_readb_relaxed        ia64_mv.readb_relaxed
-#  define platform_readw_relaxed        ia64_mv.readw_relaxed
-#  define platform_readl_relaxed        ia64_mv.readl_relaxed
-#  define platform_readq_relaxed        ia64_mv.readq_relaxed
-#  define platform_migrate		ia64_mv.migrate
-#  define platform_setup_msi_irq	ia64_mv.setup_msi_irq
-#  define platform_teardown_msi_irq	ia64_mv.teardown_msi_irq
-#  define platform_pci_fixup_bus	ia64_mv.pci_fixup_bus
-#  define platform_kernel_launch_event	ia64_mv.kernel_launch_event
-# endif
-
-/* __attribute__((__aligned__(16))) is required to make size of the
- * structure multiple of 16 bytes.
- * This will fillup the holes created because of section 3.3.1 in
- * Software Conventions guide.
- */
-struct ia64_machine_vector {
-	const char *name;
-	ia64_mv_setup_t *setup;
-	ia64_mv_cpu_init_t *cpu_init;
-	ia64_mv_irq_init_t *irq_init;
-	ia64_mv_send_ipi_t *send_ipi;
-	ia64_mv_timer_interrupt_t *timer_interrupt;
-	ia64_mv_global_tlb_purge_t *global_tlb_purge;
-	ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish;
-	ia64_mv_dma_init *dma_init;
-	ia64_mv_dma_alloc_coherent *dma_alloc_coherent;
-	ia64_mv_dma_free_coherent *dma_free_coherent;
-	ia64_mv_dma_map_single_attrs *dma_map_single_attrs;
-	ia64_mv_dma_unmap_single_attrs *dma_unmap_single_attrs;
-	ia64_mv_dma_map_sg_attrs *dma_map_sg_attrs;
-	ia64_mv_dma_unmap_sg_attrs *dma_unmap_sg_attrs;
-	ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu;
-	ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu;
-	ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device;
-	ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
-	ia64_mv_dma_mapping_error *dma_mapping_error;
-	ia64_mv_dma_supported *dma_supported;
-	ia64_mv_irq_to_vector *irq_to_vector;
-	ia64_mv_local_vector_to_irq *local_vector_to_irq;
-	ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
-	ia64_mv_pci_legacy_read_t *pci_legacy_read;
-	ia64_mv_pci_legacy_write_t *pci_legacy_write;
-	ia64_mv_inb_t *inb;
-	ia64_mv_inw_t *inw;
-	ia64_mv_inl_t *inl;
-	ia64_mv_outb_t *outb;
-	ia64_mv_outw_t *outw;
-	ia64_mv_outl_t *outl;
-	ia64_mv_mmiowb_t *mmiowb;
-	ia64_mv_readb_t *readb;
-	ia64_mv_readw_t *readw;
-	ia64_mv_readl_t *readl;
-	ia64_mv_readq_t *readq;
-	ia64_mv_readb_relaxed_t *readb_relaxed;
-	ia64_mv_readw_relaxed_t *readw_relaxed;
-	ia64_mv_readl_relaxed_t *readl_relaxed;
-	ia64_mv_readq_relaxed_t *readq_relaxed;
-	ia64_mv_migrate_t *migrate;
-	ia64_mv_setup_msi_irq_t *setup_msi_irq;
-	ia64_mv_teardown_msi_irq_t *teardown_msi_irq;
-	ia64_mv_pci_fixup_bus_t *pci_fixup_bus;
-	ia64_mv_kernel_launch_event_t *kernel_launch_event;
-} __attribute__((__aligned__(16))); /* align attrib? see above comment */
-
-#define MACHVEC_INIT(name)			\
-{						\
-	#name,					\
-	platform_setup,				\
-	platform_cpu_init,			\
-	platform_irq_init,			\
-	platform_send_ipi,			\
-	platform_timer_interrupt,		\
-	platform_global_tlb_purge,		\
-	platform_tlb_migrate_finish,		\
-	platform_dma_init,			\
-	platform_dma_alloc_coherent,		\
-	platform_dma_free_coherent,		\
-	platform_dma_map_single_attrs,		\
-	platform_dma_unmap_single_attrs,	\
-	platform_dma_map_sg_attrs,		\
-	platform_dma_unmap_sg_attrs,		\
-	platform_dma_sync_single_for_cpu,	\
-	platform_dma_sync_sg_for_cpu,		\
-	platform_dma_sync_single_for_device,	\
-	platform_dma_sync_sg_for_device,	\
-	platform_dma_mapping_error,			\
-	platform_dma_supported,			\
-	platform_irq_to_vector,			\
-	platform_local_vector_to_irq,		\
-	platform_pci_get_legacy_mem,		\
-	platform_pci_legacy_read,		\
-	platform_pci_legacy_write,		\
-	platform_inb,				\
-	platform_inw,				\
-	platform_inl,				\
-	platform_outb,				\
-	platform_outw,				\
-	platform_outl,				\
-	platform_mmiowb,			\
-	platform_readb,				\
-	platform_readw,				\
-	platform_readl,				\
-	platform_readq,				\
-	platform_readb_relaxed,			\
-	platform_readw_relaxed,			\
-	platform_readl_relaxed,			\
-	platform_readq_relaxed,			\
-	platform_migrate,			\
-	platform_setup_msi_irq,			\
-	platform_teardown_msi_irq,		\
-	platform_pci_fixup_bus,			\
-	platform_kernel_launch_event            \
-}
-
-extern struct ia64_machine_vector ia64_mv;
-extern void machvec_init (const char *name);
-extern void machvec_init_from_cmdline(const char *cmdline);
-
-# else
-#  error Unknown configuration.  Update asm-ia64/machvec.h.
-# endif /* CONFIG_IA64_GENERIC */
-
-/*
- * Declare default routines which aren't declared anywhere else:
- */
-extern ia64_mv_dma_init			swiotlb_init;
-extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
-extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
-extern ia64_mv_dma_map_single		swiotlb_map_single;
-extern ia64_mv_dma_map_single_attrs	swiotlb_map_single_attrs;
-extern ia64_mv_dma_unmap_single		swiotlb_unmap_single;
-extern ia64_mv_dma_unmap_single_attrs	swiotlb_unmap_single_attrs;
-extern ia64_mv_dma_map_sg		swiotlb_map_sg;
-extern ia64_mv_dma_map_sg_attrs		swiotlb_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg		swiotlb_unmap_sg;
-extern ia64_mv_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs;
-extern ia64_mv_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu;
-extern ia64_mv_dma_sync_sg_for_cpu	swiotlb_sync_sg_for_cpu;
-extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
-extern ia64_mv_dma_sync_sg_for_device	swiotlb_sync_sg_for_device;
-extern ia64_mv_dma_mapping_error	swiotlb_dma_mapping_error;
-extern ia64_mv_dma_supported		swiotlb_dma_supported;
-
-/*
- * Define default versions so we can extend machvec for new platforms without having
- * to update the machvec files for all existing platforms.
- */
-#ifndef platform_setup
-# define platform_setup			machvec_setup
-#endif
-#ifndef platform_cpu_init
-# define platform_cpu_init		machvec_noop
-#endif
-#ifndef platform_irq_init
-# define platform_irq_init		machvec_noop
-#endif
-
-#ifndef platform_send_ipi
-# define platform_send_ipi		ia64_send_ipi	/* default to architected version */
-#endif
-#ifndef platform_timer_interrupt
-# define platform_timer_interrupt 	machvec_timer_interrupt
-#endif
-#ifndef platform_global_tlb_purge
-# define platform_global_tlb_purge	ia64_global_tlb_purge /* default to architected version */
-#endif
-#ifndef platform_tlb_migrate_finish
-# define platform_tlb_migrate_finish	machvec_noop_mm
-#endif
-#ifndef platform_kernel_launch_event
-# define platform_kernel_launch_event	machvec_noop
-#endif
-#ifndef platform_dma_init
-# define platform_dma_init		swiotlb_init
-#endif
-#ifndef platform_dma_alloc_coherent
-# define platform_dma_alloc_coherent	swiotlb_alloc_coherent
-#endif
-#ifndef platform_dma_free_coherent
-# define platform_dma_free_coherent	swiotlb_free_coherent
-#endif
-#ifndef platform_dma_map_single_attrs
-# define platform_dma_map_single_attrs	swiotlb_map_single_attrs
-#endif
-#ifndef platform_dma_unmap_single_attrs
-# define platform_dma_unmap_single_attrs	swiotlb_unmap_single_attrs
-#endif
-#ifndef platform_dma_map_sg_attrs
-# define platform_dma_map_sg_attrs	swiotlb_map_sg_attrs
-#endif
-#ifndef platform_dma_unmap_sg_attrs
-# define platform_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs
-#endif
-#ifndef platform_dma_sync_single_for_cpu
-# define platform_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu
-#endif
-#ifndef platform_dma_sync_sg_for_cpu
-# define platform_dma_sync_sg_for_cpu		swiotlb_sync_sg_for_cpu
-#endif
-#ifndef platform_dma_sync_single_for_device
-# define platform_dma_sync_single_for_device	swiotlb_sync_single_for_device
-#endif
-#ifndef platform_dma_sync_sg_for_device
-# define platform_dma_sync_sg_for_device	swiotlb_sync_sg_for_device
-#endif
-#ifndef platform_dma_mapping_error
-# define platform_dma_mapping_error		swiotlb_dma_mapping_error
-#endif
-#ifndef platform_dma_supported
-# define  platform_dma_supported	swiotlb_dma_supported
-#endif
-#ifndef platform_irq_to_vector
-# define platform_irq_to_vector		__ia64_irq_to_vector
-#endif
-#ifndef platform_local_vector_to_irq
-# define platform_local_vector_to_irq	__ia64_local_vector_to_irq
-#endif
-#ifndef platform_pci_get_legacy_mem
-# define platform_pci_get_legacy_mem	ia64_pci_get_legacy_mem
-#endif
-#ifndef platform_pci_legacy_read
-# define platform_pci_legacy_read	ia64_pci_legacy_read
-extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size);
-#endif
-#ifndef platform_pci_legacy_write
-# define platform_pci_legacy_write	ia64_pci_legacy_write
-extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size);
-#endif
-#ifndef platform_inb
-# define platform_inb		__ia64_inb
-#endif
-#ifndef platform_inw
-# define platform_inw		__ia64_inw
-#endif
-#ifndef platform_inl
-# define platform_inl		__ia64_inl
-#endif
-#ifndef platform_outb
-# define platform_outb		__ia64_outb
-#endif
-#ifndef platform_outw
-# define platform_outw		__ia64_outw
-#endif
-#ifndef platform_outl
-# define platform_outl		__ia64_outl
-#endif
-#ifndef platform_mmiowb
-# define platform_mmiowb	__ia64_mmiowb
-#endif
-#ifndef platform_readb
-# define platform_readb		__ia64_readb
-#endif
-#ifndef platform_readw
-# define platform_readw		__ia64_readw
-#endif
-#ifndef platform_readl
-# define platform_readl		__ia64_readl
-#endif
-#ifndef platform_readq
-# define platform_readq		__ia64_readq
-#endif
-#ifndef platform_readb_relaxed
-# define platform_readb_relaxed	__ia64_readb_relaxed
-#endif
-#ifndef platform_readw_relaxed
-# define platform_readw_relaxed	__ia64_readw_relaxed
-#endif
-#ifndef platform_readl_relaxed
-# define platform_readl_relaxed	__ia64_readl_relaxed
-#endif
-#ifndef platform_readq_relaxed
-# define platform_readq_relaxed	__ia64_readq_relaxed
-#endif
-#ifndef platform_migrate
-# define platform_migrate machvec_noop_task
-#endif
-#ifndef platform_setup_msi_irq
-# define platform_setup_msi_irq		((ia64_mv_setup_msi_irq_t*)NULL)
-#endif
-#ifndef platform_teardown_msi_irq
-# define platform_teardown_msi_irq	((ia64_mv_teardown_msi_irq_t*)NULL)
-#endif
-#ifndef platform_pci_fixup_bus
-# define platform_pci_fixup_bus	machvec_noop_bus
-#endif
-
-#endif /* _ASM_IA64_MACHVEC_H */
diff --git a/include/asm-ia64/machvec_dig.h b/include/asm-ia64/machvec_dig.h
deleted file mode 100644
index 8a0752f40987..000000000000
--- a/include/asm-ia64/machvec_dig.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_IA64_MACHVEC_DIG_h
-#define _ASM_IA64_MACHVEC_DIG_h
-
-extern ia64_mv_setup_t dig_setup;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define platform_name		"dig"
-#define platform_setup		dig_setup
-
-#endif /* _ASM_IA64_MACHVEC_DIG_h */
diff --git a/include/asm-ia64/machvec_hpsim.h b/include/asm-ia64/machvec_hpsim.h
deleted file mode 100644
index cf72fc87fdfe..000000000000
--- a/include/asm-ia64/machvec_hpsim.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_IA64_MACHVEC_HPSIM_h
-#define _ASM_IA64_MACHVEC_HPSIM_h
-
-extern ia64_mv_setup_t hpsim_setup;
-extern ia64_mv_irq_init_t hpsim_irq_init;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define platform_name		"hpsim"
-#define platform_setup		hpsim_setup
-#define platform_irq_init	hpsim_irq_init
-
-#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
diff --git a/include/asm-ia64/machvec_hpzx1.h b/include/asm-ia64/machvec_hpzx1.h
deleted file mode 100644
index 2f57f5144b9f..000000000000
--- a/include/asm-ia64/machvec_hpzx1.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _ASM_IA64_MACHVEC_HPZX1_h
-#define _ASM_IA64_MACHVEC_HPZX1_h
-
-extern ia64_mv_setup_t			dig_setup;
-extern ia64_mv_dma_alloc_coherent	sba_alloc_coherent;
-extern ia64_mv_dma_free_coherent	sba_free_coherent;
-extern ia64_mv_dma_map_single_attrs	sba_map_single_attrs;
-extern ia64_mv_dma_unmap_single_attrs	sba_unmap_single_attrs;
-extern ia64_mv_dma_map_sg_attrs		sba_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg_attrs	sba_unmap_sg_attrs;
-extern ia64_mv_dma_supported		sba_dma_supported;
-extern ia64_mv_dma_mapping_error	sba_dma_mapping_error;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define platform_name				"hpzx1"
-#define platform_setup				dig_setup
-#define platform_dma_init			machvec_noop
-#define platform_dma_alloc_coherent		sba_alloc_coherent
-#define platform_dma_free_coherent		sba_free_coherent
-#define platform_dma_map_single_attrs		sba_map_single_attrs
-#define platform_dma_unmap_single_attrs		sba_unmap_single_attrs
-#define platform_dma_map_sg_attrs		sba_map_sg_attrs
-#define platform_dma_unmap_sg_attrs		sba_unmap_sg_attrs
-#define platform_dma_sync_single_for_cpu	machvec_dma_sync_single
-#define platform_dma_sync_sg_for_cpu		machvec_dma_sync_sg
-#define platform_dma_sync_single_for_device	machvec_dma_sync_single
-#define platform_dma_sync_sg_for_device		machvec_dma_sync_sg
-#define platform_dma_supported			sba_dma_supported
-#define platform_dma_mapping_error		sba_dma_mapping_error
-
-#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/include/asm-ia64/machvec_hpzx1_swiotlb.h
deleted file mode 100644
index a842cdda827b..000000000000
--- a/include/asm-ia64/machvec_hpzx1_swiotlb.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
-#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
-
-extern ia64_mv_setup_t				dig_setup;
-extern ia64_mv_dma_alloc_coherent		hwsw_alloc_coherent;
-extern ia64_mv_dma_free_coherent		hwsw_free_coherent;
-extern ia64_mv_dma_map_single_attrs		hwsw_map_single_attrs;
-extern ia64_mv_dma_unmap_single_attrs		hwsw_unmap_single_attrs;
-extern ia64_mv_dma_map_sg_attrs			hwsw_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg_attrs		hwsw_unmap_sg_attrs;
-extern ia64_mv_dma_supported			hwsw_dma_supported;
-extern ia64_mv_dma_mapping_error		hwsw_dma_mapping_error;
-extern ia64_mv_dma_sync_single_for_cpu		hwsw_sync_single_for_cpu;
-extern ia64_mv_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu;
-extern ia64_mv_dma_sync_single_for_device	hwsw_sync_single_for_device;
-extern ia64_mv_dma_sync_sg_for_device		hwsw_sync_sg_for_device;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define platform_name				"hpzx1_swiotlb"
-
-#define platform_setup				dig_setup
-#define platform_dma_init			machvec_noop
-#define platform_dma_alloc_coherent		hwsw_alloc_coherent
-#define platform_dma_free_coherent		hwsw_free_coherent
-#define platform_dma_map_single_attrs		hwsw_map_single_attrs
-#define platform_dma_unmap_single_attrs		hwsw_unmap_single_attrs
-#define platform_dma_map_sg_attrs		hwsw_map_sg_attrs
-#define platform_dma_unmap_sg_attrs		hwsw_unmap_sg_attrs
-#define platform_dma_supported			hwsw_dma_supported
-#define platform_dma_mapping_error		hwsw_dma_mapping_error
-#define platform_dma_sync_single_for_cpu	hwsw_sync_single_for_cpu
-#define platform_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu
-#define platform_dma_sync_single_for_device	hwsw_sync_single_for_device
-#define platform_dma_sync_sg_for_device		hwsw_sync_sg_for_device
-
-#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */
diff --git a/include/asm-ia64/machvec_init.h b/include/asm-ia64/machvec_init.h
deleted file mode 100644
index 7f21249fba3f..000000000000
--- a/include/asm-ia64/machvec_init.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <asm/machvec.h>
-
-extern ia64_mv_send_ipi_t ia64_send_ipi;
-extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
-extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
-extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
-extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
-extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read;
-extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write;
-
-extern ia64_mv_inb_t __ia64_inb;
-extern ia64_mv_inw_t __ia64_inw;
-extern ia64_mv_inl_t __ia64_inl;
-extern ia64_mv_outb_t __ia64_outb;
-extern ia64_mv_outw_t __ia64_outw;
-extern ia64_mv_outl_t __ia64_outl;
-extern ia64_mv_mmiowb_t __ia64_mmiowb;
-extern ia64_mv_readb_t __ia64_readb;
-extern ia64_mv_readw_t __ia64_readw;
-extern ia64_mv_readl_t __ia64_readl;
-extern ia64_mv_readq_t __ia64_readq;
-extern ia64_mv_readb_t __ia64_readb_relaxed;
-extern ia64_mv_readw_t __ia64_readw_relaxed;
-extern ia64_mv_readl_t __ia64_readl_relaxed;
-extern ia64_mv_readq_t __ia64_readq_relaxed;
-
-#define MACHVEC_HELPER(name)									\
- struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec")))	\
-	= MACHVEC_INIT(name);
-
-#define MACHVEC_DEFINE(name)	MACHVEC_HELPER(name)
-
-MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME)
diff --git a/include/asm-ia64/machvec_sn2.h b/include/asm-ia64/machvec_sn2.h
deleted file mode 100644
index 781308ea7b88..000000000000
--- a/include/asm-ia64/machvec_sn2.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc.  All Rights Reserved.
- * 
- * This program is free software; you can redistribute it and/or modify it 
- * under the terms of version 2 of the GNU General Public License 
- * as published by the Free Software Foundation.
- * 
- * This program is distributed in the hope that it would be useful, but 
- * WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
- * 
- * Further, this software is distributed without any warranty that it is 
- * free of the rightful claim of any third person regarding infringement 
- * or the like.  Any license provided herein, whether implied or 
- * otherwise, applies only to this software file.  Patent licenses, if 
- * any, provided herein do not apply to combinations of this program with 
- * other software, or any other product whatsoever.
- * 
- * You should have received a copy of the GNU General Public 
- * License along with this program; if not, write the Free Software 
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- * 
- * For further information regarding this notice, see: 
- * 
- * http://oss.sgi.com/projects/GenInfo/NoticeExplan
- */
-
-#ifndef _ASM_IA64_MACHVEC_SN2_H
-#define _ASM_IA64_MACHVEC_SN2_H
-
-extern ia64_mv_setup_t sn_setup;
-extern ia64_mv_cpu_init_t sn_cpu_init;
-extern ia64_mv_irq_init_t sn_irq_init;
-extern ia64_mv_send_ipi_t sn2_send_IPI;
-extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
-extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
-extern ia64_mv_tlb_migrate_finish_t	sn_tlb_migrate_finish;
-extern ia64_mv_irq_to_vector sn_irq_to_vector;
-extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
-extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
-extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
-extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
-extern ia64_mv_inb_t __sn_inb;
-extern ia64_mv_inw_t __sn_inw;
-extern ia64_mv_inl_t __sn_inl;
-extern ia64_mv_outb_t __sn_outb;
-extern ia64_mv_outw_t __sn_outw;
-extern ia64_mv_outl_t __sn_outl;
-extern ia64_mv_mmiowb_t __sn_mmiowb;
-extern ia64_mv_readb_t __sn_readb;
-extern ia64_mv_readw_t __sn_readw;
-extern ia64_mv_readl_t __sn_readl;
-extern ia64_mv_readq_t __sn_readq;
-extern ia64_mv_readb_t __sn_readb_relaxed;
-extern ia64_mv_readw_t __sn_readw_relaxed;
-extern ia64_mv_readl_t __sn_readl_relaxed;
-extern ia64_mv_readq_t __sn_readq_relaxed;
-extern ia64_mv_dma_alloc_coherent	sn_dma_alloc_coherent;
-extern ia64_mv_dma_free_coherent	sn_dma_free_coherent;
-extern ia64_mv_dma_map_single_attrs	sn_dma_map_single_attrs;
-extern ia64_mv_dma_unmap_single_attrs	sn_dma_unmap_single_attrs;
-extern ia64_mv_dma_map_sg_attrs		sn_dma_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg_attrs	sn_dma_unmap_sg_attrs;
-extern ia64_mv_dma_sync_single_for_cpu	sn_dma_sync_single_for_cpu;
-extern ia64_mv_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu;
-extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device;
-extern ia64_mv_dma_sync_sg_for_device	sn_dma_sync_sg_for_device;
-extern ia64_mv_dma_mapping_error	sn_dma_mapping_error;
-extern ia64_mv_dma_supported		sn_dma_supported;
-extern ia64_mv_migrate_t		sn_migrate;
-extern ia64_mv_kernel_launch_event_t	sn_kernel_launch_event;
-extern ia64_mv_setup_msi_irq_t		sn_setup_msi_irq;
-extern ia64_mv_teardown_msi_irq_t	sn_teardown_msi_irq;
-extern ia64_mv_pci_fixup_bus_t		sn_pci_fixup_bus;
-
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define platform_name			"sn2"
-#define platform_setup			sn_setup
-#define platform_cpu_init		sn_cpu_init
-#define platform_irq_init		sn_irq_init
-#define platform_send_ipi		sn2_send_IPI
-#define platform_timer_interrupt	sn_timer_interrupt
-#define platform_global_tlb_purge       sn2_global_tlb_purge
-#define platform_tlb_migrate_finish	sn_tlb_migrate_finish
-#define platform_pci_fixup		sn_pci_fixup
-#define platform_inb			__sn_inb
-#define platform_inw			__sn_inw
-#define platform_inl			__sn_inl
-#define platform_outb			__sn_outb
-#define platform_outw			__sn_outw
-#define platform_outl			__sn_outl
-#define platform_mmiowb			__sn_mmiowb
-#define platform_readb			__sn_readb
-#define platform_readw			__sn_readw
-#define platform_readl			__sn_readl
-#define platform_readq			__sn_readq
-#define platform_readb_relaxed		__sn_readb_relaxed
-#define platform_readw_relaxed		__sn_readw_relaxed
-#define platform_readl_relaxed		__sn_readl_relaxed
-#define platform_readq_relaxed		__sn_readq_relaxed
-#define platform_irq_to_vector		sn_irq_to_vector
-#define platform_local_vector_to_irq	sn_local_vector_to_irq
-#define platform_pci_get_legacy_mem	sn_pci_get_legacy_mem
-#define platform_pci_legacy_read	sn_pci_legacy_read
-#define platform_pci_legacy_write	sn_pci_legacy_write
-#define platform_dma_init		machvec_noop
-#define platform_dma_alloc_coherent	sn_dma_alloc_coherent
-#define platform_dma_free_coherent	sn_dma_free_coherent
-#define platform_dma_map_single_attrs	sn_dma_map_single_attrs
-#define platform_dma_unmap_single_attrs	sn_dma_unmap_single_attrs
-#define platform_dma_map_sg_attrs	sn_dma_map_sg_attrs
-#define platform_dma_unmap_sg_attrs	sn_dma_unmap_sg_attrs
-#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu
-#define platform_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu
-#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device
-#define platform_dma_sync_sg_for_device	sn_dma_sync_sg_for_device
-#define platform_dma_mapping_error		sn_dma_mapping_error
-#define platform_dma_supported		sn_dma_supported
-#define platform_migrate		sn_migrate
-#define platform_kernel_launch_event    sn_kernel_launch_event
-#ifdef CONFIG_PCI_MSI
-#define platform_setup_msi_irq		sn_setup_msi_irq
-#define platform_teardown_msi_irq	sn_teardown_msi_irq
-#else
-#define platform_setup_msi_irq		((ia64_mv_setup_msi_irq_t*)NULL)
-#define platform_teardown_msi_irq	((ia64_mv_teardown_msi_irq_t*)NULL)
-#endif
-#define platform_pci_fixup_bus		sn_pci_fixup_bus
-
-#include <asm/sn/io.h>
-
-#endif /* _ASM_IA64_MACHVEC_SN2_H */
diff --git a/include/asm-ia64/machvec_uv.h b/include/asm-ia64/machvec_uv.h
deleted file mode 100644
index 2931447f3813..000000000000
--- a/include/asm-ia64/machvec_uv.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV Core Functions
- *
- * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_MACHVEC_UV_H
-#define _ASM_IA64_MACHVEC_UV_H
-
-extern ia64_mv_setup_t uv_setup;
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure.  When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define platform_name			"uv"
-#define platform_setup			uv_setup
-
-#endif /* _ASM_IA64_MACHVEC_UV_H */
diff --git a/include/asm-ia64/mc146818rtc.h b/include/asm-ia64/mc146818rtc.h
deleted file mode 100644
index 407787a237ba..000000000000
--- a/include/asm-ia64/mc146818rtc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASM_IA64_MC146818RTC_H
-#define _ASM_IA64_MC146818RTC_H
-
-/*
- * Machine dependent access functions for RTC registers.
- */
-
-/* empty include file to satisfy the include in genrtc.c */
-
-#endif /* _ASM_IA64_MC146818RTC_H */
diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h
deleted file mode 100644
index 18a4321349a3..000000000000
--- a/include/asm-ia64/mca.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * File:	mca.h
- * Purpose:	Machine check handling specific defines
- *
- * Copyright (C) 1999, 2004 Silicon Graphics, Inc.
- * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
- * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
- * Copyright (C) Russ Anderson <rja@sgi.com>
- */
-
-#ifndef _ASM_IA64_MCA_H
-#define _ASM_IA64_MCA_H
-
-#if !defined(__ASSEMBLY__)
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-
-#include <asm/param.h>
-#include <asm/sal.h>
-#include <asm/processor.h>
-#include <asm/mca_asm.h>
-
-#define IA64_MCA_RENDEZ_TIMEOUT		(20 * 1000)	/* value in milliseconds - 20 seconds */
-
-typedef struct ia64_fptr {
-	unsigned long fp;
-	unsigned long gp;
-} ia64_fptr_t;
-
-typedef union cmcv_reg_u {
-	u64	cmcv_regval;
-	struct	{
-		u64	cmcr_vector		: 8;
-		u64	cmcr_reserved1		: 4;
-		u64	cmcr_ignored1		: 1;
-		u64	cmcr_reserved2		: 3;
-		u64	cmcr_mask		: 1;
-		u64	cmcr_ignored2		: 47;
-	} cmcv_reg_s;
-
-} cmcv_reg_t;
-
-#define cmcv_mask		cmcv_reg_s.cmcr_mask
-#define cmcv_vector		cmcv_reg_s.cmcr_vector
-
-enum {
-	IA64_MCA_RENDEZ_CHECKIN_NOTDONE	=	0x0,
-	IA64_MCA_RENDEZ_CHECKIN_DONE	=	0x1,
-	IA64_MCA_RENDEZ_CHECKIN_INIT	=	0x2,
-	IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA	=	0x3,
-};
-
-/* Information maintained by the MC infrastructure */
-typedef struct ia64_mc_info_s {
-	u64		imi_mca_handler;
-	size_t		imi_mca_handler_size;
-	u64		imi_monarch_init_handler;
-	size_t		imi_monarch_init_handler_size;
-	u64		imi_slave_init_handler;
-	size_t		imi_slave_init_handler_size;
-	u8		imi_rendez_checkin[NR_CPUS];
-
-} ia64_mc_info_t;
-
-/* Handover state from SAL to OS and vice versa, for both MCA and INIT events.
- * Besides the handover state, it also contains some saved registers from the
- * time of the event.
- * Note: mca_asm.S depends on the precise layout of this structure.
- */
-
-struct ia64_sal_os_state {
-
-	/* SAL to OS */
-	u64			os_gp;			/* GP of the os registered with the SAL, physical */
-	u64			pal_proc;		/* PAL_PROC entry point, physical */
-	u64			sal_proc;		/* SAL_PROC entry point, physical */
-	u64			rv_rc;			/* MCA - Rendezvous state, INIT - reason code */
-	u64			proc_state_param;	/* from R18 */
-	u64			monarch;		/* 1 for a monarch event, 0 for a slave */
-
-	/* common */
-	u64			sal_ra;			/* Return address in SAL, physical */
-	u64			sal_gp;			/* GP of the SAL - physical */
-	pal_min_state_area_t	*pal_min_state;		/* from R17.  physical in asm, virtual in C */
-	/* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK).
-	 * Note: if the MCA/INIT recovery code wants to resume to a new context
-	 * then it must change these values to reflect the new kernel stack.
-	 */
-	u64			prev_IA64_KR_CURRENT;	/* previous value of IA64_KR(CURRENT) */
-	u64			prev_IA64_KR_CURRENT_STACK;
-	struct task_struct	*prev_task;		/* previous task, NULL if it is not useful */
-	/* Some interrupt registers are not saved in minstate, pt_regs or
-	 * switch_stack.  Because MCA/INIT can occur when interrupts are
-	 * disabled, we need to save the additional interrupt registers over
-	 * MCA/INIT and resume.
-	 */
-	u64			isr;
-	u64			ifa;
-	u64			itir;
-	u64			iipa;
-	u64			iim;
-	u64			iha;
-
-	/* OS to SAL */
-	u64			os_status;		/* OS status to SAL, enum below */
-	u64			context;		/* 0 if return to same context
-							   1 if return to new context */
-};
-
-enum {
-	IA64_MCA_CORRECTED	=	0x0,	/* Error has been corrected by OS_MCA */
-	IA64_MCA_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
-	IA64_MCA_COLD_BOOT	=	-2,	/* Cold boot of the system need from SAL */
-	IA64_MCA_HALT		=	-3	/* System to be halted by SAL */
-};
-
-enum {
-	IA64_INIT_RESUME	=	0x0,	/* Resume after return from INIT */
-	IA64_INIT_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
-};
-
-enum {
-	IA64_MCA_SAME_CONTEXT	=	0x0,	/* SAL to return to same context */
-	IA64_MCA_NEW_CONTEXT	=	-1	/* SAL to return to new context */
-};
-
-/* Per-CPU MCA state that is too big for normal per-CPU variables.  */
-
-struct ia64_mca_cpu {
-	u64 mca_stack[KERNEL_STACK_SIZE/8];
-	u64 init_stack[KERNEL_STACK_SIZE/8];
-};
-
-/* Array of physical addresses of each CPU's MCA area.  */
-extern unsigned long __per_cpu_mca[NR_CPUS];
-
-extern int cpe_vector;
-extern int ia64_cpe_irq;
-extern void ia64_mca_init(void);
-extern void ia64_mca_cpu_init(void *);
-extern void ia64_os_mca_dispatch(void);
-extern void ia64_os_mca_dispatch_end(void);
-extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *);
-extern void ia64_init_handler(struct pt_regs *,
-			      struct switch_stack *,
-			      struct ia64_sal_os_state *);
-extern void ia64_monarch_init_handler(void);
-extern void ia64_slave_init_handler(void);
-extern void ia64_mca_cmc_vector_setup(void);
-extern int  ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *));
-extern void ia64_unreg_MCA_extension(void);
-extern u64 ia64_get_rnat(u64 *);
-extern void ia64_mca_printk(const char * fmt, ...)
-	 __attribute__ ((format (printf, 1, 2)));
-
-struct ia64_mca_notify_die {
-	struct ia64_sal_os_state *sos;
-	int *monarch_cpu;
-	int *data;
-};
-
-DECLARE_PER_CPU(u64, ia64_mca_pal_base);
-
-#else	/* __ASSEMBLY__ */
-
-#define IA64_MCA_CORRECTED	0x0	/* Error has been corrected by OS_MCA */
-#define IA64_MCA_WARM_BOOT	-1	/* Warm boot of the system need from SAL */
-#define IA64_MCA_COLD_BOOT	-2	/* Cold boot of the system need from SAL */
-#define IA64_MCA_HALT		-3	/* System to be halted by SAL */
-
-#define IA64_INIT_RESUME	0x0	/* Resume after return from INIT */
-#define IA64_INIT_WARM_BOOT	-1	/* Warm boot of the system need from SAL */
-
-#define IA64_MCA_SAME_CONTEXT	0x0	/* SAL to return to same context */
-#define IA64_MCA_NEW_CONTEXT	-1	/* SAL to return to new context */
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_IA64_MCA_H */
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h
deleted file mode 100644
index dd2a5b134390..000000000000
--- a/include/asm-ia64/mca_asm.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * File:	mca_asm.h
- * Purpose:	Machine check handling specific defines
- *
- * Copyright (C) 1999 Silicon Graphics, Inc.
- * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
- * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
- * Copyright (C) 2000 Hewlett-Packard Co.
- * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
- * Copyright (C) 2005 Silicon Graphics, Inc
- * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
- */
-#ifndef _ASM_IA64_MCA_ASM_H
-#define _ASM_IA64_MCA_ASM_H
-
-#define PSR_IC		13
-#define PSR_I		14
-#define	PSR_DT		17
-#define PSR_RT		27
-#define PSR_MC		35
-#define PSR_IT		36
-#define PSR_BN		44
-
-/*
- * This macro converts a instruction virtual address to a physical address
- * Right now for simulation purposes the virtual addresses are
- * direct mapped to physical addresses.
- *	1. Lop off bits 61 thru 63 in the virtual address
- */
-#define INST_VA_TO_PA(addr)							\
-	dep	addr	= 0, addr, 61, 3
-/*
- * This macro converts a data virtual address to a physical address
- * Right now for simulation purposes the virtual addresses are
- * direct mapped to physical addresses.
- *	1. Lop off bits 61 thru 63 in the virtual address
- */
-#define DATA_VA_TO_PA(addr)							\
-	tpa	addr	= addr
-/*
- * This macro converts a data physical address to a virtual address
- * Right now for simulation purposes the virtual addresses are
- * direct mapped to physical addresses.
- *	1. Put 0x7 in bits 61 thru 63.
- */
-#define DATA_PA_TO_VA(addr,temp)							\
-	mov	temp	= 0x7	;;							\
-	dep	addr	= temp, addr, 61, 3
-
-#define GET_THIS_PADDR(reg, var)		\
-	mov	reg = IA64_KR(PER_CPU_DATA);;	\
-        addl	reg = THIS_CPU(var), reg
-
-/*
- * This macro jumps to the instruction at the given virtual address
- * and starts execution in physical mode with all the address
- * translations turned off.
- *	1.	Save the current psr
- *	2.	Make sure that all the upper 32 bits are off
- *
- *	3.	Clear the interrupt enable and interrupt state collection bits
- *		in the psr before updating the ipsr and iip.
- *
- *	4.	Turn off the instruction, data and rse translation bits of the psr
- *		and store the new value into ipsr
- *		Also make sure that the interrupts are disabled.
- *		Ensure that we are in little endian mode.
- *		[psr.{rt, it, dt, i, be} = 0]
- *
- *	5.	Get the physical address corresponding to the virtual address
- *		of the next instruction bundle and put it in iip.
- *		(Using magic numbers 24 and 40 in the deposint instruction since
- *		 the IA64_SDK code directly maps to lower 24bits as physical address
- *		 from a virtual address).
- *
- *	6.	Do an rfi to move the values from ipsr to psr and iip to ip.
- */
-#define  PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)				\
-	mov	old_psr = psr;								\
-	;;										\
-	dep	old_psr = 0, old_psr, 32, 32;						\
-											\
-	mov	ar.rsc = 0 ;								\
-	;;										\
-	srlz.d;										\
-	mov	temp2 = ar.bspstore;							\
-	;;										\
-	DATA_VA_TO_PA(temp2);								\
-	;;										\
-	mov	temp1 = ar.rnat;							\
-	;;										\
-	mov	ar.bspstore = temp2;							\
-	;;										\
-	mov	ar.rnat = temp1;							\
-	mov	temp1 = psr;								\
-	mov	temp2 = psr;								\
-	;;										\
-											\
-	dep	temp2 = 0, temp2, PSR_IC, 2;						\
-	;;										\
-	mov	psr.l = temp2;								\
-	;;										\
-	srlz.d;										\
-	dep	temp1 = 0, temp1, 32, 32;						\
-	;;										\
-	dep	temp1 = 0, temp1, PSR_IT, 1;						\
-	;;										\
-	dep	temp1 = 0, temp1, PSR_DT, 1;						\
-	;;										\
-	dep	temp1 = 0, temp1, PSR_RT, 1;						\
-	;;										\
-	dep	temp1 = 0, temp1, PSR_I, 1;						\
-	;;										\
-	dep	temp1 = 0, temp1, PSR_IC, 1;						\
-	;;										\
-	dep	temp1 = -1, temp1, PSR_MC, 1;						\
-	;;										\
-	mov	cr.ipsr = temp1;							\
-	;;										\
-	LOAD_PHYSICAL(p0, temp2, start_addr);						\
-	;;										\
-	mov	cr.iip = temp2;								\
-	mov	cr.ifs = r0;								\
-	DATA_VA_TO_PA(sp);								\
-	DATA_VA_TO_PA(gp);								\
-	;;										\
-	srlz.i;										\
-	;;										\
-	nop	1;									\
-	nop	2;									\
-	nop	1;									\
-	nop	2;									\
-	rfi;										\
-	;;
-
-/*
- * This macro jumps to the instruction at the given virtual address
- * and starts execution in virtual mode with all the address
- * translations turned on.
- *	1.	Get the old saved psr
- *
- *	2.	Clear the interrupt state collection bit in the current psr.
- *
- *	3.	Set the instruction translation bit back in the old psr
- *		Note we have to do this since we are right now saving only the
- *		lower 32-bits of old psr.(Also the old psr has the data and
- *		rse translation bits on)
- *
- *	4.	Set ipsr to this old_psr with "it" bit set and "bn" = 1.
- *
- *	5.	Reset the current thread pointer (r13).
- *
- *	6.	Set iip to the virtual address of the next instruction bundle.
- *
- *	7.	Do an rfi to move ipsr to psr and iip to ip.
- */
-
-#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)	\
-	mov	temp2 = psr;					\
-	;;							\
-	mov	old_psr = temp2;				\
-	;;							\
-	dep	temp2 = 0, temp2, PSR_IC, 2;			\
-	;;							\
-	mov	psr.l = temp2;					\
-	mov	ar.rsc = 0;					\
-	;;							\
-	srlz.d;							\
-	mov	r13 = ar.k6;					\
-	mov	temp2 = ar.bspstore;				\
-	;;							\
-	DATA_PA_TO_VA(temp2,temp1);				\
-	;;							\
-	mov	temp1 = ar.rnat;				\
-	;;							\
-	mov	ar.bspstore = temp2;				\
-	;;							\
-	mov	ar.rnat = temp1;				\
-	;;							\
-	mov	temp1 = old_psr;				\
-	;;							\
-	mov	temp2 = 1;					\
-	;;							\
-	dep	temp1 = temp2, temp1, PSR_IC, 1;		\
-	;;							\
-	dep	temp1 = temp2, temp1, PSR_IT, 1;		\
-	;;							\
-	dep	temp1 = temp2, temp1, PSR_DT, 1;		\
-	;;							\
-	dep	temp1 = temp2, temp1, PSR_RT, 1;		\
-	;;							\
-	dep	temp1 = temp2, temp1, PSR_BN, 1;		\
-	;;							\
-								\
-	mov     cr.ipsr = temp1;				\
-	movl	temp2 = start_addr;				\
-	;;							\
-	mov	cr.iip = temp2;					\
-	movl	gp = __gp					\
-	;;							\
-	DATA_PA_TO_VA(sp, temp1);				\
-	srlz.i;							\
-	;;							\
-	nop	1;						\
-	nop	2;						\
-	nop	1;						\
-	rfi							\
-	;;
-
-/*
- * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
- * stacks, except that the SAL/OS state and a switch_stack are stored near the
- * top of the MCA/INIT stack.  To support concurrent entry to MCA or INIT, as
- * well as MCA over INIT, each event needs its own SAL/OS state.  All entries
- * are 16 byte aligned.
- *
- *      +---------------------------+
- *      |          pt_regs          |
- *      +---------------------------+
- *      |        switch_stack       |
- *      +---------------------------+
- *      |        SAL/OS state       |
- *      +---------------------------+
- *      |    16 byte scratch area   |
- *      +---------------------------+ <-------- SP at start of C MCA handler
- *      |           .....           |
- *      +---------------------------+
- *      | RBS for MCA/INIT handler  |
- *      +---------------------------+
- *      | struct task for MCA/INIT  |
- *      +---------------------------+ <-------- Bottom of MCA/INIT stack
- */
-
-#define ALIGN16(x)			((x)&~15)
-#define MCA_PT_REGS_OFFSET		ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
-#define MCA_SWITCH_STACK_OFFSET		ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
-#define MCA_SOS_OFFSET			ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
-#define MCA_SP_OFFSET			ALIGN16(MCA_SOS_OFFSET-16)
-
-#endif /* _ASM_IA64_MCA_ASM_H */
diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h
deleted file mode 100644
index 7245a5781594..000000000000
--- a/include/asm-ia64/meminit.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef meminit_h
-#define meminit_h
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-
-/*
- * Entries defined so far:
- * 	- boot param structure itself
- * 	- memory map
- * 	- initrd (optional)
- * 	- command line string
- * 	- kernel code & data
- * 	- crash dumping code reserved region
- * 	- Kernel memory map built from EFI memory map
- * 	- ELF core header
- *
- * More could be added if necessary
- */
-#define IA64_MAX_RSVD_REGIONS 8
-
-struct rsvd_region {
-	unsigned long start;	/* virtual address of beginning of element */
-	unsigned long end;	/* virtual address of end of element + 1 */
-};
-
-extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1];
-extern int num_rsvd_regions;
-
-extern void find_memory (void);
-extern void reserve_memory (void);
-extern void find_initrd (void);
-extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
-extern int filter_memory (unsigned long start, unsigned long end, void *arg);
-extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e);
-extern int find_max_min_low_pfn (unsigned long , unsigned long, void *);
-
-extern unsigned long vmcore_find_descriptor_size(unsigned long address);
-extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end);
-
-/*
- * For rounding an address to the next IA64_GRANULE_SIZE or order
- */
-#define GRANULEROUNDDOWN(n)	((n) & ~(IA64_GRANULE_SIZE-1))
-#define GRANULEROUNDUP(n)	(((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
-#define ORDERROUNDDOWN(n)	((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
-
-#ifdef CONFIG_NUMA
-  extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
-#else
-# define call_pernode_memory(start, len, func)	(*func)(start, len, 0)
-#endif
-
-#define IGNORE_PFN0	1	/* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
-
-extern int register_active_ranges(u64 start, u64 len, int nid);
-
-#ifdef CONFIG_VIRTUAL_MEM_MAP
-# define LARGE_GAP	0x40000000 /* Use virtual mem map if hole is > than this */
-  extern unsigned long vmalloc_end;
-  extern struct page *vmem_map;
-  extern int find_largest_hole (u64 start, u64 end, void *arg);
-  extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
-  extern int vmemmap_find_next_valid_pfn(int, int);
-#else
-static inline int vmemmap_find_next_valid_pfn(int node, int i)
-{
-	return i + 1;
-}
-#endif
-#endif /* meminit_h */
diff --git a/include/asm-ia64/mman.h b/include/asm-ia64/mman.h
deleted file mode 100644
index c73b87832a1e..000000000000
--- a/include/asm-ia64/mman.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASM_IA64_MMAN_H
-#define _ASM_IA64_MMAN_H
-
-/*
- * Based on <asm-i386/mman.h>.
- *
- * Modified 1998-2000, 2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x00100		/* stack-like segment */
-#define MAP_GROWSUP	0x00200		/* register stack-like segment */
-#define MAP_DENYWRITE	0x00800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x01000		/* mark it as an executable */
-#define MAP_LOCKED	0x02000		/* pages are locked */
-#define MAP_NORESERVE	0x04000		/* don't check for reservations */
-#define MAP_POPULATE	0x08000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#define arch_mmap_check	ia64_mmap_check
-int ia64_mmap_check(unsigned long addr, unsigned long len,
-		unsigned long flags);
-#endif
-#endif
-
-#endif /* _ASM_IA64_MMAN_H */
diff --git a/include/asm-ia64/mmu.h b/include/asm-ia64/mmu.h
deleted file mode 100644
index 611432ba579c..000000000000
--- a/include/asm-ia64/mmu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-/*
- * Type for a context number.  We declare it volatile to ensure proper
- * ordering when it's accessed outside of spinlock'd critical sections
- * (e.g., as done in activate_mm() and init_new_context()).
- */
-typedef volatile unsigned long mm_context_t;
-
-typedef unsigned long nv_mm_context_t;
-
-#endif
diff --git a/include/asm-ia64/mmu_context.h b/include/asm-ia64/mmu_context.h
deleted file mode 100644
index cef2400983fa..000000000000
--- a/include/asm-ia64/mmu_context.h
+++ /dev/null
@@ -1,202 +0,0 @@
-#ifndef _ASM_IA64_MMU_CONTEXT_H
-#define _ASM_IA64_MMU_CONTEXT_H
-
-/*
- * Copyright (C) 1998-2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-/*
- * Routines to manage the allocation of task context numbers.  Task context
- * numbers are used to reduce or eliminate the need to perform TLB flushes
- * due to context switches.  Context numbers are implemented using ia-64
- * region ids.  Since the IA-64 TLB does not consider the region number when
- * performing a TLB lookup, we need to assign a unique region id to each
- * region in a process.  We use the least significant three bits in aregion
- * id for this purpose.
- */
-
-#define IA64_REGION_ID_KERNEL	0 /* the kernel's region id (tlb.c depends on this being 0) */
-
-#define ia64_rid(ctx,addr)	(((ctx) << 3) | (addr >> 61))
-
-# include <asm/page.h>
-# ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <linux/percpu.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-
-#include <asm/processor.h>
-#include <asm-generic/mm_hooks.h>
-
-struct ia64_ctx {
-	spinlock_t lock;
-	unsigned int next;	/* next context number to use */
-	unsigned int limit;     /* available free range */
-	unsigned int max_ctx;   /* max. context value supported by all CPUs */
-				/* call wrap_mmu_context when next >= max */
-	unsigned long *bitmap;  /* bitmap size is max_ctx+1 */
-	unsigned long *flushmap;/* pending rid to be flushed */
-};
-
-extern struct ia64_ctx ia64_ctx;
-DECLARE_PER_CPU(u8, ia64_need_tlb_flush);
-
-extern void mmu_context_init (void);
-extern void wrap_mmu_context (struct mm_struct *mm);
-
-static inline void
-enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * When the context counter wraps around all TLBs need to be flushed because
- * an old context number might have been reused. This is signalled by the
- * ia64_need_tlb_flush per-CPU variable, which is checked in the routine
- * below. Called by activate_mm(). <efocht@ess.nec.de>
- */
-static inline void
-delayed_tlb_flush (void)
-{
-	extern void local_flush_tlb_all (void);
-	unsigned long flags;
-
-	if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) {
-		spin_lock_irqsave(&ia64_ctx.lock, flags);
-		if (__ia64_per_cpu_var(ia64_need_tlb_flush)) {
-			local_flush_tlb_all();
-			__ia64_per_cpu_var(ia64_need_tlb_flush) = 0;
-		}
-		spin_unlock_irqrestore(&ia64_ctx.lock, flags);
-	}
-}
-
-static inline nv_mm_context_t
-get_mmu_context (struct mm_struct *mm)
-{
-	unsigned long flags;
-	nv_mm_context_t context = mm->context;
-
-	if (likely(context))
-		goto out;
-
-	spin_lock_irqsave(&ia64_ctx.lock, flags);
-	/* re-check, now that we've got the lock: */
-	context = mm->context;
-	if (context == 0) {
-		cpus_clear(mm->cpu_vm_mask);
-		if (ia64_ctx.next >= ia64_ctx.limit) {
-			ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap,
-					ia64_ctx.max_ctx, ia64_ctx.next);
-			ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap,
-					ia64_ctx.max_ctx, ia64_ctx.next);
-			if (ia64_ctx.next >= ia64_ctx.max_ctx)
-				wrap_mmu_context(mm);
-		}
-		mm->context = context = ia64_ctx.next++;
-		__set_bit(context, ia64_ctx.bitmap);
-	}
-	spin_unlock_irqrestore(&ia64_ctx.lock, flags);
-out:
-	/*
-	 * Ensure we're not starting to use "context" before any old
-	 * uses of it are gone from our TLB.
-	 */
-	delayed_tlb_flush();
-
-	return context;
-}
-
-/*
- * Initialize context number to some sane value.  MM is guaranteed to be a
- * brand-new address-space, so no TLB flushing is needed, ever.
- */
-static inline int
-init_new_context (struct task_struct *p, struct mm_struct *mm)
-{
-	mm->context = 0;
-	return 0;
-}
-
-static inline void
-destroy_context (struct mm_struct *mm)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-reload_context (nv_mm_context_t context)
-{
-	unsigned long rid;
-	unsigned long rid_incr = 0;
-	unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4;
-
-	old_rr4 = ia64_get_rr(RGN_BASE(RGN_HPAGE));
-	rid = context << 3;	/* make space for encoding the region number */
-	rid_incr = 1 << 8;
-
-	/* encode the region id, preferred page size, and VHPT enable bit: */
-	rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1;
-	rr1 = rr0 + 1*rid_incr;
-	rr2 = rr0 + 2*rid_incr;
-	rr3 = rr0 + 3*rid_incr;
-	rr4 = rr0 + 4*rid_incr;
-#ifdef  CONFIG_HUGETLB_PAGE
-	rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc);
-
-#  if RGN_HPAGE != 4
-#    error "reload_context assumes RGN_HPAGE is 4"
-#  endif
-#endif
-
-	ia64_set_rr(0x0000000000000000UL, rr0);
-	ia64_set_rr(0x2000000000000000UL, rr1);
-	ia64_set_rr(0x4000000000000000UL, rr2);
-	ia64_set_rr(0x6000000000000000UL, rr3);
-	ia64_set_rr(0x8000000000000000UL, rr4);
-	ia64_srlz_i();			/* srlz.i implies srlz.d */
-}
-
-/*
- * Must be called with preemption off
- */
-static inline void
-activate_context (struct mm_struct *mm)
-{
-	nv_mm_context_t context;
-
-	do {
-		context = get_mmu_context(mm);
-		if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
-			cpu_set(smp_processor_id(), mm->cpu_vm_mask);
-		reload_context(context);
-		/*
-		 * in the unlikely event of a TLB-flush by another thread,
-		 * redo the load.
-		 */
-	} while (unlikely(context != mm->context));
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-/*
- * Switch from address space PREV to address space NEXT.
- */
-static inline void
-activate_mm (struct mm_struct *prev, struct mm_struct *next)
-{
-	/*
-	 * We may get interrupts here, but that's OK because interrupt
-	 * handlers cannot touch user-space.
-	 */
-	ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd));
-	activate_context(next);
-}
-
-#define switch_mm(prev_mm,next_mm,next_task)	activate_mm(prev_mm, next_mm)
-
-# endif /* ! __ASSEMBLY__ */
-#endif /* _ASM_IA64_MMU_CONTEXT_H */
diff --git a/include/asm-ia64/mmzone.h b/include/asm-ia64/mmzone.h
deleted file mode 100644
index 34efe88eb849..000000000000
--- a/include/asm-ia64/mmzone.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000,2003 Silicon Graphics, Inc.  All rights reserved.
- * Copyright (c) 2002 NEC Corp.
- * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
- * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
- */
-#ifndef _ASM_IA64_MMZONE_H
-#define _ASM_IA64_MMZONE_H
-
-#include <linux/numa.h>
-#include <asm/page.h>
-#include <asm/meminit.h>
-
-#ifdef CONFIG_NUMA
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
-#ifdef CONFIG_NUMA
-	extern int paddr_to_nid(unsigned long);
-	int nid = paddr_to_nid(pfn << PAGE_SHIFT);
-	if (nid < 0)
-		return 0;
-	else
-		return nid;
-#else
-	return 0;
-#endif
-}
-
-#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-extern int early_pfn_to_nid(unsigned long pfn);
-#endif
-
-#ifdef CONFIG_IA64_DIG /* DIG systems are small */
-# define MAX_PHYSNODE_ID	8
-# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 8)
-#else /* sn2 is the biggest case, so we use that if !DIG */
-# define MAX_PHYSNODE_ID	2048
-# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
-#endif
-
-#else /* CONFIG_NUMA */
-# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
-#endif /* CONFIG_NUMA */
-
-#endif /* _ASM_IA64_MMZONE_H */
diff --git a/include/asm-ia64/module.h b/include/asm-ia64/module.h
deleted file mode 100644
index d2da61e4c49b..000000000000
--- a/include/asm-ia64/module.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _ASM_IA64_MODULE_H
-#define _ASM_IA64_MODULE_H
-
-/*
- * IA-64-specific support for kernel module loader.
- *
- * Copyright (C) 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-struct elf64_shdr;			/* forward declration */
-
-struct mod_arch_specific {
-	struct elf64_shdr *core_plt;	/* core PLT section */
-	struct elf64_shdr *init_plt;	/* init PLT section */
-	struct elf64_shdr *got;		/* global offset table */
-	struct elf64_shdr *opd;		/* official procedure descriptors */
-	struct elf64_shdr *unwind;	/* unwind-table section */
-	unsigned long gp;		/* global-pointer for module */
-
-	void *core_unw_table;		/* core unwind-table cookie returned by unwinder */
-	void *init_unw_table;		/* init unwind-table cookie returned by unwinder */
-	unsigned int next_got_entry;	/* index of next available got entry */
-};
-
-#define Elf_Shdr	Elf64_Shdr
-#define Elf_Sym		Elf64_Sym
-#define Elf_Ehdr	Elf64_Ehdr
-
-#define MODULE_PROC_FAMILY	"ia64"
-#define MODULE_ARCH_VERMAGIC	MODULE_PROC_FAMILY \
-	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
-
-#define ARCH_SHF_SMALL	SHF_IA_64_SHORT
-
-#endif /* _ASM_IA64_MODULE_H */
diff --git a/include/asm-ia64/msgbuf.h b/include/asm-ia64/msgbuf.h
deleted file mode 100644
index 6c64c0d2aae1..000000000000
--- a/include/asm-ia64/msgbuf.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASM_IA64_MSGBUF_H
-#define _ASM_IA64_MSGBUF_H
-
-/*
- * The msqid64_ds structure for IA-64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused1;
-	unsigned long  __unused2;
-};
-
-#endif /* _ASM_IA64_MSGBUF_H */
diff --git a/include/asm-ia64/mutex.h b/include/asm-ia64/mutex.h
deleted file mode 100644
index bed73a643a56..000000000000
--- a/include/asm-ia64/mutex.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * ia64 implementation of the mutex fastpath.
- *
- * Copyright (C) 2006 Ken Chen <kenneth.w.chen@intel.com>
- *
- */
-
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
-
-/**
- *  __mutex_fastpath_lock - try to take the lock by moving the count
- *                          from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function MUST leave the value lower than
- * 1 even when the "1" assertion wasn't true.
- */
-static inline void
-__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	if (unlikely(ia64_fetchadd4_acq(count, -1) != 1))
-		fail_fn(count);
-}
-
-/**
- *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
- *                                 from 1 to a 0 value
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 1
- *
- * Change the count from 1 to a value lower than 1, and call <fail_fn> if
- * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
- * or anything the slow path function returns.
- */
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	if (unlikely(ia64_fetchadd4_acq(count, -1) != 1))
-		return fail_fn(count);
-	return 0;
-}
-
-/**
- *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
- *  @count: pointer of type atomic_t
- *  @fail_fn: function to call if the original value was not 0
- *
- * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
- * In the failure case, this function is allowed to either set the value to
- * 1, or to set it to a value lower than 1.
- *
- * If the implementation sets it to a value of lower than 1, then the
- * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
- * to return 0 otherwise.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
-	int ret = ia64_fetchadd4_rel(count, 1);
-	if (unlikely(ret < 0))
-		fail_fn(count);
-}
-
-#define __mutex_slowpath_needs_to_unlock()		1
-
-/**
- * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
- *
- *  @count: pointer of type atomic_t
- *  @fail_fn: fallback function
- *
- * Change the count from 1 to a value lower than 1, and return 0 (failure)
- * if it wasn't 1 originally, or return 1 (success) otherwise. This function
- * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
- * Additionally, if the value was < 0 originally, this function must not leave
- * it to 0 on failure.
- *
- * If the architecture has no effective trylock variant, it should call the
- * <fail_fn> spinlock-based trylock variant unconditionally.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
-	if (cmpxchg_acq(count, 1, 0) == 1)
-		return 1;
-	return 0;
-}
-
-#endif
diff --git a/include/asm-ia64/namei.h b/include/asm-ia64/namei.h
deleted file mode 100644
index 78e768079083..000000000000
--- a/include/asm-ia64/namei.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_IA64_NAMEI_H
-#define _ASM_IA64_NAMEI_H
-
-/*
- * Modified 1998, 1999, 2001
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/ptrace.h>
-#include <asm/system.h>
-
-#define EMUL_PREFIX_LINUX_IA32 "/emul/ia32-linux/"
-
-static inline char *
-__emul_prefix (void)
-{
-	switch (current->personality) {
-	      case PER_LINUX32:
-		return EMUL_PREFIX_LINUX_IA32;
-	      default:
-		return NULL;
-	}
-}
-
-#endif /* _ASM_IA64_NAMEI_H */
diff --git a/include/asm-ia64/nodedata.h b/include/asm-ia64/nodedata.h
deleted file mode 100644
index 2fb337b0e9b7..000000000000
--- a/include/asm-ia64/nodedata.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000 Silicon Graphics, Inc.  All rights reserved.
- * Copyright (c) 2002 NEC Corp.
- * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
- * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
- */
-#ifndef _ASM_IA64_NODEDATA_H
-#define _ASM_IA64_NODEDATA_H
-
-#include <linux/numa.h>
-
-#include <asm/percpu.h>
-#include <asm/mmzone.h>
-
-#ifdef CONFIG_NUMA
-
-/*
- * Node Data. One of these structures is located on each node of a NUMA system.
- */
-
-struct pglist_data;
-struct ia64_node_data {
-	short			active_cpu_count;
-	short			node;
-	struct pglist_data	*pg_data_ptrs[MAX_NUMNODES];
-};
-
-
-/*
- * Return a pointer to the node_data structure for the executing cpu.
- */
-#define local_node_data		(local_cpu_data->node_data)
-
-/*
- * Given a node id, return a pointer to the pg_data_t for the node.
- *
- * NODE_DATA 	- should be used in all code not related to system
- *		  initialization. It uses pernode data structures to minimize
- *		  offnode memory references. However, these structure are not 
- *		  present during boot. This macro can be used once cpu_init
- *		  completes.
- */
-#define NODE_DATA(nid)		(local_node_data->pg_data_ptrs[nid])
-
-/*
- * LOCAL_DATA_ADDR - This is to calculate the address of other node's
- *		     "local_node_data" at hot-plug phase. The local_node_data
- *		     is pointed by per_cpu_page. Kernel usually use it for
- *		     just executing cpu. However, when new node is hot-added,
- *		     the addresses of local data for other nodes are necessary
- *		     to update all of them.
- */
-#define LOCAL_DATA_ADDR(pgdat)  			\
-	((struct ia64_node_data *)((u64)(pgdat) + 	\
-				   L1_CACHE_ALIGN(sizeof(struct pglist_data))))
-
-#endif /* CONFIG_NUMA */
-
-#endif /* _ASM_IA64_NODEDATA_H */
diff --git a/include/asm-ia64/numa.h b/include/asm-ia64/numa.h
deleted file mode 100644
index 3499ff57bf42..000000000000
--- a/include/asm-ia64/numa.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * This file contains NUMA specific prototypes and definitions.
- *
- * 2002/08/05 Erich Focht <efocht@ess.nec.de>
- *
- */
-#ifndef _ASM_IA64_NUMA_H
-#define _ASM_IA64_NUMA_H
-
-
-#ifdef CONFIG_NUMA
-
-#include <linux/cache.h>
-#include <linux/cpumask.h>
-#include <linux/numa.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-
-#include <asm/mmzone.h>
-
-#define NUMA_NO_NODE	-1
-
-extern u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
-extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
-extern pg_data_t *pgdat_list[MAX_NUMNODES];
-
-/* Stuff below this line could be architecture independent */
-
-extern int num_node_memblks;		/* total number of memory chunks */
-
-/*
- * List of node memory chunks. Filled when parsing SRAT table to
- * obtain information about memory nodes.
-*/
-
-struct node_memblk_s {
-	unsigned long start_paddr;
-	unsigned long size;
-	int nid;		/* which logical node contains this chunk? */
-	int bank;		/* which mem bank on this node */
-};
-
-struct node_cpuid_s {
-	u16	phys_id;	/* id << 8 | eid */
-	int	nid;		/* logical node containing this CPU */
-};
-
-extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
-extern struct node_cpuid_s node_cpuid[NR_CPUS];
-
-/*
- * ACPI 2.0 SLIT (System Locality Information Table)
- * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
- *
- * This is a matrix with "distances" between nodes, they should be
- * proportional to the memory access latency ratios.
- */
-
-extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
-#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)])
-
-extern int paddr_to_nid(unsigned long paddr);
-
-#define local_nodeid (cpu_to_node_map[smp_processor_id()])
-
-extern void map_cpu_to_node(int cpu, int nid);
-extern void unmap_cpu_from_node(int cpu, int nid);
-
-
-#else /* !CONFIG_NUMA */
-#define map_cpu_to_node(cpu, nid)	do{}while(0)
-#define unmap_cpu_from_node(cpu, nid)	do{}while(0)
-
-#define paddr_to_nid(addr)	0
-
-#endif /* CONFIG_NUMA */
-
-#endif /* _ASM_IA64_NUMA_H */
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
deleted file mode 100644
index 36f39321b768..000000000000
--- a/include/asm-ia64/page.h
+++ /dev/null
@@ -1,224 +0,0 @@
-#ifndef _ASM_IA64_PAGE_H
-#define _ASM_IA64_PAGE_H
-/*
- * Pagetable related stuff.
- *
- * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <asm/intrinsics.h>
-#include <asm/types.h>
-
-/*
- * The top three bits of an IA64 address are its Region Number.
- * Different regions are assigned to different purposes.
- */
-#define RGN_SHIFT	(61)
-#define RGN_BASE(r)	(__IA64_UL_CONST(r)<<RGN_SHIFT)
-#define RGN_BITS	(RGN_BASE(-1))
-
-#define RGN_KERNEL	7	/* Identity mapped region */
-#define RGN_UNCACHED    6	/* Identity mapped I/O region */
-#define RGN_GATE	5	/* Gate page, Kernel text, etc */
-#define RGN_HPAGE	4	/* For Huge TLB pages */
-
-/*
- * PAGE_SHIFT determines the actual kernel page size.
- */
-#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
-# define PAGE_SHIFT	12
-#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
-# define PAGE_SHIFT	13
-#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
-# define PAGE_SHIFT	14
-#elif defined(CONFIG_IA64_PAGE_SIZE_64KB)
-# define PAGE_SHIFT	16
-#else
-# error Unsupported page size!
-#endif
-
-#define PAGE_SIZE		(__IA64_UL_CONST(1) << PAGE_SHIFT)
-#define PAGE_MASK		(~(PAGE_SIZE - 1))
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
-#define PERCPU_PAGE_SHIFT	16	/* log2() of max. size of per-CPU area */
-#define PERCPU_PAGE_SIZE	(__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
-
-
-#ifdef CONFIG_HUGETLB_PAGE
-# define HPAGE_REGION_BASE	RGN_BASE(RGN_HPAGE)
-# define HPAGE_SHIFT		hpage_shift
-# define HPAGE_SHIFT_DEFAULT	28	/* check ia64 SDM for architecture supported size */
-# define HPAGE_SIZE		(__IA64_UL_CONST(1) << HPAGE_SHIFT)
-# define HPAGE_MASK		(~(HPAGE_SIZE - 1))
-
-# define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-#endif /* CONFIG_HUGETLB_PAGE */
-
-#ifdef __ASSEMBLY__
-# define __pa(x)		((x) - PAGE_OFFSET)
-# define __va(x)		((x) + PAGE_OFFSET)
-#else /* !__ASSEMBLY */
-#  define STRICT_MM_TYPECHECKS
-
-extern void clear_page (void *page);
-extern void copy_page (void *to, void *from);
-
-/*
- * clear_user_page() and copy_user_page() can't be inline functions because
- * flush_dcache_page() can't be defined until later...
- */
-#define clear_user_page(addr, vaddr, page)	\
-do {						\
-	clear_page(addr);			\
-	flush_dcache_page(page);		\
-} while (0)
-
-#define copy_user_page(to, from, vaddr, page)	\
-do {						\
-	copy_page((to), (from));		\
-	flush_dcache_page(page);		\
-} while (0)
-
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr)		\
-({									\
-	struct page *page = alloc_page_vma(				\
-		GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr);	\
-	if (page)							\
- 		flush_dcache_page(page);				\
-	page;								\
-})
-
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#ifdef CONFIG_VIRTUAL_MEM_MAP
-extern int ia64_pfn_valid (unsigned long pfn);
-#else
-# define ia64_pfn_valid(pfn) 1
-#endif
-
-#ifdef CONFIG_VIRTUAL_MEM_MAP
-extern struct page *vmem_map;
-#ifdef CONFIG_DISCONTIGMEM
-# define page_to_pfn(page)	((unsigned long) (page - vmem_map))
-# define pfn_to_page(pfn)	(vmem_map + (pfn))
-#else
-# include <asm-generic/memory_model.h>
-#endif
-#else
-# include <asm-generic/memory_model.h>
-#endif
-
-#ifdef CONFIG_FLATMEM
-# define pfn_valid(pfn)		(((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
-#elif defined(CONFIG_DISCONTIGMEM)
-extern unsigned long min_low_pfn;
-extern unsigned long max_low_pfn;
-# define pfn_valid(pfn)		(((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
-#endif
-
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-
-typedef union ia64_va {
-	struct {
-		unsigned long off : 61;		/* intra-region offset */
-		unsigned long reg :  3;		/* region number */
-	} f;
-	unsigned long l;
-	void *p;
-} ia64_va;
-
-/*
- * Note: These macros depend on the fact that PAGE_OFFSET has all
- * region bits set to 1 and all other bits set to zero.  They are
- * expressed in this way to ensure they result in a single "dep"
- * instruction.
- */
-#define __pa(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;})
-#define __va(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;})
-
-#define REGION_NUMBER(x)	({ia64_va _v; _v.l = (long) (x); _v.f.reg;})
-#define REGION_OFFSET(x)	({ia64_va _v; _v.l = (long) (x); _v.f.off;})
-
-#ifdef CONFIG_HUGETLB_PAGE
-# define htlbpage_to_page(x)	(((unsigned long) REGION_NUMBER(x) << 61)			\
-				 | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT)))
-# define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-extern unsigned int hpage_shift;
-#endif
-
-static __inline__ int
-get_order (unsigned long size)
-{
-	long double d = size - 1;
-	long order;
-
-	order = ia64_getf_exp(d);
-	order = order - PAGE_SHIFT - 0xffff + 1;
-	if (order < 0)
-		order = 0;
-	return order;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#ifdef STRICT_MM_TYPECHECKS
-  /*
-   * These are used to make use of C type-checking..
-   */
-  typedef struct { unsigned long pte; } pte_t;
-  typedef struct { unsigned long pmd; } pmd_t;
-#ifdef CONFIG_PGTABLE_4
-  typedef struct { unsigned long pud; } pud_t;
-#endif
-  typedef struct { unsigned long pgd; } pgd_t;
-  typedef struct { unsigned long pgprot; } pgprot_t;
-  typedef struct page *pgtable_t;
-
-# define pte_val(x)	((x).pte)
-# define pmd_val(x)	((x).pmd)
-#ifdef CONFIG_PGTABLE_4
-# define pud_val(x)	((x).pud)
-#endif
-# define pgd_val(x)	((x).pgd)
-# define pgprot_val(x)	((x).pgprot)
-
-# define __pte(x)	((pte_t) { (x) } )
-# define __pgprot(x)	((pgprot_t) { (x) } )
-
-#else /* !STRICT_MM_TYPECHECKS */
-  /*
-   * .. while these make it easier on the compiler
-   */
-# ifndef __ASSEMBLY__
-    typedef unsigned long pte_t;
-    typedef unsigned long pmd_t;
-    typedef unsigned long pgd_t;
-    typedef unsigned long pgprot_t;
-    typedef struct page *pgtable_t;
-# endif
-
-# define pte_val(x)	(x)
-# define pmd_val(x)	(x)
-# define pgd_val(x)	(x)
-# define pgprot_val(x)	(x)
-
-# define __pte(x)	(x)
-# define __pgd(x)	(x)
-# define __pgprot(x)	(x)
-#endif /* !STRICT_MM_TYPECHECKS */
-
-#define PAGE_OFFSET			RGN_BASE(RGN_KERNEL)
-
-#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE |					\
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |		\
-					 (((current->personality & READ_IMPLIES_EXEC) != 0)	\
-					  ? VM_EXEC : 0))
-
-#endif /* _ASM_IA64_PAGE_H */
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
deleted file mode 100644
index 67b02901ead4..000000000000
--- a/include/asm-ia64/pal.h
+++ /dev/null
@@ -1,1827 +0,0 @@
-#ifndef _ASM_IA64_PAL_H
-#define _ASM_IA64_PAL_H
-
-/*
- * Processor Abstraction Layer definitions.
- *
- * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0
- * chapter 11 IA-64 Processor Abstraction Layer
- *
- * Copyright (C) 1998-2001 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- * Copyright (C) 1999 VA Linux Systems
- * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
- * Copyright (C) 2008 Silicon Graphics, Inc. (SGI)
- *
- * 99/10/01	davidm	Make sure we pass zero for reserved parameters.
- * 00/03/07	davidm	Updated pal_cache_flush() to be in sync with PAL v2.6.
- * 00/03/23     cfleck  Modified processor min-state save area to match updated PAL & SAL info
- * 00/05/24     eranian Updated to latest PAL spec, fix structures bugs, added
- * 00/05/25	eranian Support for stack calls, and static physical calls
- * 00/06/18	eranian Support for stacked physical calls
- * 06/10/26	rja	Support for Intel Itanium Architecture Software Developer's
- *			Manual Rev 2.2 (Jan 2006)
- */
-
-/*
- * Note that some of these calls use a static-register only calling
- * convention which has nothing to do with the regular calling
- * convention.
- */
-#define PAL_CACHE_FLUSH		1	/* flush i/d cache */
-#define PAL_CACHE_INFO		2	/* get detailed i/d cache info */
-#define PAL_CACHE_INIT		3	/* initialize i/d cache */
-#define PAL_CACHE_SUMMARY	4	/* get summary of cache hierarchy */
-#define PAL_MEM_ATTRIB		5	/* list supported memory attributes */
-#define PAL_PTCE_INFO		6	/* purge TLB info */
-#define PAL_VM_INFO		7	/* return supported virtual memory features */
-#define PAL_VM_SUMMARY		8	/* return summary on supported vm features */
-#define PAL_BUS_GET_FEATURES	9	/* return processor bus interface features settings */
-#define PAL_BUS_SET_FEATURES	10	/* set processor bus features */
-#define PAL_DEBUG_INFO		11	/* get number of debug registers */
-#define PAL_FIXED_ADDR		12	/* get fixed component of processors's directed address */
-#define PAL_FREQ_BASE		13	/* base frequency of the platform */
-#define PAL_FREQ_RATIOS		14	/* ratio of processor, bus and ITC frequency */
-#define PAL_PERF_MON_INFO	15	/* return performance monitor info */
-#define PAL_PLATFORM_ADDR	16	/* set processor interrupt block and IO port space addr */
-#define PAL_PROC_GET_FEATURES	17	/* get configurable processor features & settings */
-#define PAL_PROC_SET_FEATURES	18	/* enable/disable configurable processor features */
-#define PAL_RSE_INFO		19	/* return rse information */
-#define PAL_VERSION		20	/* return version of PAL code */
-#define PAL_MC_CLEAR_LOG	21	/* clear all processor log info */
-#define PAL_MC_DRAIN		22	/* drain operations which could result in an MCA */
-#define PAL_MC_EXPECTED		23	/* set/reset expected MCA indicator */
-#define PAL_MC_DYNAMIC_STATE	24	/* get processor dynamic state */
-#define PAL_MC_ERROR_INFO	25	/* get processor MCA info and static state */
-#define PAL_MC_RESUME		26	/* Return to interrupted process */
-#define PAL_MC_REGISTER_MEM	27	/* Register memory for PAL to use during MCAs and inits */
-#define PAL_HALT		28	/* enter the low power HALT state */
-#define PAL_HALT_LIGHT		29	/* enter the low power light halt state*/
-#define PAL_COPY_INFO		30	/* returns info needed to relocate PAL */
-#define PAL_CACHE_LINE_INIT	31	/* init tags & data of cache line */
-#define PAL_PMI_ENTRYPOINT	32	/* register PMI memory entry points with the processor */
-#define PAL_ENTER_IA_32_ENV	33	/* enter IA-32 system environment */
-#define PAL_VM_PAGE_SIZE	34	/* return vm TC and page walker page sizes */
-
-#define PAL_MEM_FOR_TEST	37	/* get amount of memory needed for late processor test */
-#define PAL_CACHE_PROT_INFO	38	/* get i/d cache protection info */
-#define PAL_REGISTER_INFO	39	/* return AR and CR register information*/
-#define PAL_SHUTDOWN		40	/* enter processor shutdown state */
-#define PAL_PREFETCH_VISIBILITY	41	/* Make Processor Prefetches Visible */
-#define PAL_LOGICAL_TO_PHYSICAL 42	/* returns information on logical to physical processor mapping */
-#define PAL_CACHE_SHARED_INFO	43	/* returns information on caches shared by logical processor */
-#define PAL_GET_HW_POLICY	48	/* Get current hardware resource sharing policy */
-#define PAL_SET_HW_POLICY	49	/* Set current hardware resource sharing policy */
-#define PAL_VP_INFO		50	/* Information about virtual processor features */
-#define PAL_MC_HW_TRACKING	51	/* Hardware tracking status */
-
-#define PAL_COPY_PAL		256	/* relocate PAL procedures and PAL PMI */
-#define PAL_HALT_INFO		257	/* return the low power capabilities of processor */
-#define PAL_TEST_PROC		258	/* perform late processor self-test */
-#define PAL_CACHE_READ		259	/* read tag & data of cacheline for diagnostic testing */
-#define PAL_CACHE_WRITE		260	/* write tag & data of cacheline for diagnostic testing */
-#define PAL_VM_TR_READ		261	/* read contents of translation register */
-#define PAL_GET_PSTATE		262	/* get the current P-state */
-#define PAL_SET_PSTATE		263	/* set the P-state */
-#define PAL_BRAND_INFO		274	/* Processor branding information */
-
-#define PAL_GET_PSTATE_TYPE_LASTSET	0
-#define PAL_GET_PSTATE_TYPE_AVGANDRESET	1
-#define PAL_GET_PSTATE_TYPE_AVGNORESET	2
-#define PAL_GET_PSTATE_TYPE_INSTANT	3
-
-#define PAL_MC_ERROR_INJECT	276	/* Injects processor error or returns injection capabilities */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <asm/fpu.h>
-
-/*
- * Data types needed to pass information into PAL procedures and
- * interpret information returned by them.
- */
-
-/* Return status from the PAL procedure */
-typedef s64				pal_status_t;
-
-#define PAL_STATUS_SUCCESS		0	/* No error */
-#define PAL_STATUS_UNIMPLEMENTED	(-1)	/* Unimplemented procedure */
-#define PAL_STATUS_EINVAL		(-2)	/* Invalid argument */
-#define PAL_STATUS_ERROR		(-3)	/* Error */
-#define PAL_STATUS_CACHE_INIT_FAIL	(-4)	/* Could not initialize the
-						 * specified level and type of
-						 * cache without sideeffects
-						 * and "restrict" was 1
-						 */
-#define PAL_STATUS_REQUIRES_MEMORY	(-9)	/* Call requires PAL memory buffer */
-
-/* Processor cache level in the hierarchy */
-typedef u64				pal_cache_level_t;
-#define PAL_CACHE_LEVEL_L0		0	/* L0 */
-#define PAL_CACHE_LEVEL_L1		1	/* L1 */
-#define PAL_CACHE_LEVEL_L2		2	/* L2 */
-
-
-/* Processor cache type at a particular level in the hierarchy */
-
-typedef u64				pal_cache_type_t;
-#define PAL_CACHE_TYPE_INSTRUCTION	1	/* Instruction cache */
-#define PAL_CACHE_TYPE_DATA		2	/* Data or unified cache */
-#define PAL_CACHE_TYPE_INSTRUCTION_DATA	3	/* Both Data & Instruction */
-
-
-#define PAL_CACHE_FLUSH_INVALIDATE	1	/* Invalidate clean lines */
-#define PAL_CACHE_FLUSH_CHK_INTRS	2	/* check for interrupts/mc while flushing */
-
-/* Processor cache line size in bytes  */
-typedef int				pal_cache_line_size_t;
-
-/* Processor cache line state */
-typedef u64				pal_cache_line_state_t;
-#define PAL_CACHE_LINE_STATE_INVALID	0	/* Invalid */
-#define PAL_CACHE_LINE_STATE_SHARED	1	/* Shared */
-#define PAL_CACHE_LINE_STATE_EXCLUSIVE	2	/* Exclusive */
-#define PAL_CACHE_LINE_STATE_MODIFIED	3	/* Modified */
-
-typedef struct pal_freq_ratio {
-	u32 den, num;		/* numerator & denominator */
-} itc_ratio, proc_ratio;
-
-typedef	union  pal_cache_config_info_1_s {
-	struct {
-		u64		u		: 1,	/* 0 Unified cache ? */
-				at		: 2,	/* 2-1 Cache mem attr*/
-				reserved	: 5,	/* 7-3 Reserved */
-				associativity	: 8,	/* 16-8 Associativity*/
-				line_size	: 8,	/* 23-17 Line size */
-				stride		: 8,	/* 31-24 Stride */
-				store_latency	: 8,	/*39-32 Store latency*/
-				load_latency	: 8,	/* 47-40 Load latency*/
-				store_hints	: 8,	/* 55-48 Store hints*/
-				load_hints	: 8;	/* 63-56 Load hints */
-	} pcci1_bits;
-	u64			pcci1_data;
-} pal_cache_config_info_1_t;
-
-typedef	union  pal_cache_config_info_2_s {
-	struct {
-		u32		cache_size;		/*cache size in bytes*/
-
-
-		u32		alias_boundary	: 8,	/* 39-32 aliased addr
-							 * separation for max
-							 * performance.
-							 */
-				tag_ls_bit	: 8,	/* 47-40 LSb of addr*/
-				tag_ms_bit	: 8,	/* 55-48 MSb of addr*/
-				reserved	: 8;	/* 63-56 Reserved */
-	} pcci2_bits;
-	u64			pcci2_data;
-} pal_cache_config_info_2_t;
-
-
-typedef struct pal_cache_config_info_s {
-	pal_status_t			pcci_status;
-	pal_cache_config_info_1_t	pcci_info_1;
-	pal_cache_config_info_2_t	pcci_info_2;
-	u64				pcci_reserved;
-} pal_cache_config_info_t;
-
-#define pcci_ld_hints		pcci_info_1.pcci1_bits.load_hints
-#define pcci_st_hints		pcci_info_1.pcci1_bits.store_hints
-#define pcci_ld_latency		pcci_info_1.pcci1_bits.load_latency
-#define pcci_st_latency		pcci_info_1.pcci1_bits.store_latency
-#define pcci_stride		pcci_info_1.pcci1_bits.stride
-#define pcci_line_size		pcci_info_1.pcci1_bits.line_size
-#define pcci_assoc		pcci_info_1.pcci1_bits.associativity
-#define pcci_cache_attr		pcci_info_1.pcci1_bits.at
-#define pcci_unified		pcci_info_1.pcci1_bits.u
-#define pcci_tag_msb		pcci_info_2.pcci2_bits.tag_ms_bit
-#define pcci_tag_lsb		pcci_info_2.pcci2_bits.tag_ls_bit
-#define pcci_alias_boundary	pcci_info_2.pcci2_bits.alias_boundary
-#define pcci_cache_size		pcci_info_2.pcci2_bits.cache_size
-
-
-
-/* Possible values for cache attributes */
-
-#define PAL_CACHE_ATTR_WT		0	/* Write through cache */
-#define PAL_CACHE_ATTR_WB		1	/* Write back cache */
-#define PAL_CACHE_ATTR_WT_OR_WB		2	/* Either write thru or write
-						 * back depending on TLB
-						 * memory attributes
-						 */
-
-
-/* Possible values for cache hints */
-
-#define PAL_CACHE_HINT_TEMP_1		0	/* Temporal level 1 */
-#define PAL_CACHE_HINT_NTEMP_1		1	/* Non-temporal level 1 */
-#define PAL_CACHE_HINT_NTEMP_ALL	3	/* Non-temporal all levels */
-
-/* Processor cache protection  information */
-typedef union pal_cache_protection_element_u {
-	u32			pcpi_data;
-	struct {
-		u32		data_bits	: 8, /* # data bits covered by
-						      * each unit of protection
-						      */
-
-				tagprot_lsb	: 6, /* Least -do- */
-				tagprot_msb	: 6, /* Most Sig. tag address
-						      * bit that this
-						      * protection covers.
-						      */
-				prot_bits	: 6, /* # of protection bits */
-				method		: 4, /* Protection method */
-				t_d		: 2; /* Indicates which part
-						      * of the cache this
-						      * protection encoding
-						      * applies.
-						      */
-	} pcp_info;
-} pal_cache_protection_element_t;
-
-#define pcpi_cache_prot_part	pcp_info.t_d
-#define pcpi_prot_method	pcp_info.method
-#define pcpi_prot_bits		pcp_info.prot_bits
-#define pcpi_tagprot_msb	pcp_info.tagprot_msb
-#define pcpi_tagprot_lsb	pcp_info.tagprot_lsb
-#define pcpi_data_bits		pcp_info.data_bits
-
-/* Processor cache part encodings */
-#define PAL_CACHE_PROT_PART_DATA	0	/* Data protection  */
-#define PAL_CACHE_PROT_PART_TAG		1	/* Tag  protection */
-#define PAL_CACHE_PROT_PART_TAG_DATA	2	/* Tag+data protection (tag is
-						 * more significant )
-						 */
-#define PAL_CACHE_PROT_PART_DATA_TAG	3	/* Data+tag protection (data is
-						 * more significant )
-						 */
-#define PAL_CACHE_PROT_PART_MAX		6
-
-
-typedef struct pal_cache_protection_info_s {
-	pal_status_t			pcpi_status;
-	pal_cache_protection_element_t	pcp_info[PAL_CACHE_PROT_PART_MAX];
-} pal_cache_protection_info_t;
-
-
-/* Processor cache protection method encodings */
-#define PAL_CACHE_PROT_METHOD_NONE		0	/* No protection */
-#define PAL_CACHE_PROT_METHOD_ODD_PARITY	1	/* Odd parity */
-#define PAL_CACHE_PROT_METHOD_EVEN_PARITY	2	/* Even parity */
-#define PAL_CACHE_PROT_METHOD_ECC		3	/* ECC protection */
-
-
-/* Processor cache line identification in the hierarchy */
-typedef union pal_cache_line_id_u {
-	u64			pclid_data;
-	struct {
-		u64		cache_type	: 8,	/* 7-0 cache type */
-				level		: 8,	/* 15-8 level of the
-							 * cache in the
-							 * hierarchy.
-							 */
-				way		: 8,	/* 23-16 way in the set
-							 */
-				part		: 8,	/* 31-24 part of the
-							 * cache
-							 */
-				reserved	: 32;	/* 63-32 is reserved*/
-	} pclid_info_read;
-	struct {
-		u64		cache_type	: 8,	/* 7-0 cache type */
-				level		: 8,	/* 15-8 level of the
-							 * cache in the
-							 * hierarchy.
-							 */
-				way		: 8,	/* 23-16 way in the set
-							 */
-				part		: 8,	/* 31-24 part of the
-							 * cache
-							 */
-				mesi		: 8,	/* 39-32 cache line
-							 * state
-							 */
-				start		: 8,	/* 47-40 lsb of data to
-							 * invert
-							 */
-				length		: 8,	/* 55-48 #bits to
-							 * invert
-							 */
-				trigger		: 8;	/* 63-56 Trigger error
-							 * by doing a load
-							 * after the write
-							 */
-
-	} pclid_info_write;
-} pal_cache_line_id_u_t;
-
-#define pclid_read_part		pclid_info_read.part
-#define pclid_read_way		pclid_info_read.way
-#define pclid_read_level	pclid_info_read.level
-#define pclid_read_cache_type	pclid_info_read.cache_type
-
-#define pclid_write_trigger	pclid_info_write.trigger
-#define pclid_write_length	pclid_info_write.length
-#define pclid_write_start	pclid_info_write.start
-#define pclid_write_mesi	pclid_info_write.mesi
-#define pclid_write_part	pclid_info_write.part
-#define pclid_write_way		pclid_info_write.way
-#define pclid_write_level	pclid_info_write.level
-#define pclid_write_cache_type	pclid_info_write.cache_type
-
-/* Processor cache line part encodings */
-#define PAL_CACHE_LINE_ID_PART_DATA		0	/* Data */
-#define PAL_CACHE_LINE_ID_PART_TAG		1	/* Tag */
-#define PAL_CACHE_LINE_ID_PART_DATA_PROT	2	/* Data protection */
-#define PAL_CACHE_LINE_ID_PART_TAG_PROT		3	/* Tag protection */
-#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT	4	/* Data+tag
-							 * protection
-							 */
-typedef struct pal_cache_line_info_s {
-	pal_status_t		pcli_status;		/* Return status of the read cache line
-							 * info call.
-							 */
-	u64			pcli_data;		/* 64-bit data, tag, protection bits .. */
-	u64			pcli_data_len;		/* data length in bits */
-	pal_cache_line_state_t	pcli_cache_line_state;	/* mesi state */
-
-} pal_cache_line_info_t;
-
-
-/* Machine Check related crap */
-
-/* Pending event status bits  */
-typedef u64					pal_mc_pending_events_t;
-
-#define PAL_MC_PENDING_MCA			(1 << 0)
-#define PAL_MC_PENDING_INIT			(1 << 1)
-
-/* Error information type */
-typedef u64					pal_mc_info_index_t;
-
-#define PAL_MC_INFO_PROCESSOR			0	/* Processor */
-#define PAL_MC_INFO_CACHE_CHECK			1	/* Cache check */
-#define PAL_MC_INFO_TLB_CHECK			2	/* Tlb check */
-#define PAL_MC_INFO_BUS_CHECK			3	/* Bus check */
-#define PAL_MC_INFO_REQ_ADDR			4	/* Requestor address */
-#define PAL_MC_INFO_RESP_ADDR			5	/* Responder address */
-#define PAL_MC_INFO_TARGET_ADDR			6	/* Target address */
-#define PAL_MC_INFO_IMPL_DEP			7	/* Implementation
-							 * dependent
-							 */
-
-#define PAL_TLB_CHECK_OP_PURGE			8
-
-typedef struct pal_process_state_info_s {
-	u64		reserved1	: 2,
-			rz		: 1,	/* PAL_CHECK processor
-						 * rendezvous
-						 * successful.
-						 */
-
-			ra		: 1,	/* PAL_CHECK attempted
-						 * a rendezvous.
-						 */
-			me		: 1,	/* Distinct multiple
-						 * errors occurred
-						 */
-
-			mn		: 1,	/* Min. state save
-						 * area has been
-						 * registered with PAL
-						 */
-
-			sy		: 1,	/* Storage integrity
-						 * synched
-						 */
-
-
-			co		: 1,	/* Continuable */
-			ci		: 1,	/* MC isolated */
-			us		: 1,	/* Uncontained storage
-						 * damage.
-						 */
-
-
-			hd		: 1,	/* Non-essential hw
-						 * lost (no loss of
-						 * functionality)
-						 * causing the
-						 * processor to run in
-						 * degraded mode.
-						 */
-
-			tl		: 1,	/* 1 => MC occurred
-						 * after an instr was
-						 * executed but before
-						 * the trap that
-						 * resulted from instr
-						 * execution was
-						 * generated.
-						 * (Trap Lost )
-						 */
-			mi		: 1,	/* More information available
-						 * call PAL_MC_ERROR_INFO
-						 */
-			pi		: 1,	/* Precise instruction pointer */
-			pm		: 1,	/* Precise min-state save area */
-
-			dy		: 1,	/* Processor dynamic
-						 * state valid
-						 */
-
-
-			in		: 1,	/* 0 = MC, 1 = INIT */
-			rs		: 1,	/* RSE valid */
-			cm		: 1,	/* MC corrected */
-			ex		: 1,	/* MC is expected */
-			cr		: 1,	/* Control regs valid*/
-			pc		: 1,	/* Perf cntrs valid */
-			dr		: 1,	/* Debug regs valid */
-			tr		: 1,	/* Translation regs
-						 * valid
-						 */
-			rr		: 1,	/* Region regs valid */
-			ar		: 1,	/* App regs valid */
-			br		: 1,	/* Branch regs valid */
-			pr		: 1,	/* Predicate registers
-						 * valid
-						 */
-
-			fp		: 1,	/* fp registers valid*/
-			b1		: 1,	/* Preserved bank one
-						 * general registers
-						 * are valid
-						 */
-			b0		: 1,	/* Preserved bank zero
-						 * general registers
-						 * are valid
-						 */
-			gr		: 1,	/* General registers
-						 * are valid
-						 * (excl. banked regs)
-						 */
-			dsize		: 16,	/* size of dynamic
-						 * state returned
-						 * by the processor
-						 */
-
-			se		: 1,	/* Shared error.  MCA in a
-						   shared structure */
-			reserved2	: 10,
-			cc		: 1,	/* Cache check */
-			tc		: 1,	/* TLB check */
-			bc		: 1,	/* Bus check */
-			rc		: 1,	/* Register file check */
-			uc		: 1;	/* Uarch check */
-
-} pal_processor_state_info_t;
-
-typedef struct pal_cache_check_info_s {
-	u64		op		: 4,	/* Type of cache
-						 * operation that
-						 * caused the machine
-						 * check.
-						 */
-			level		: 2,	/* Cache level */
-			reserved1	: 2,
-			dl		: 1,	/* Failure in data part
-						 * of cache line
-						 */
-			tl		: 1,	/* Failure in tag part
-						 * of cache line
-						 */
-			dc		: 1,	/* Failure in dcache */
-			ic		: 1,	/* Failure in icache */
-			mesi		: 3,	/* Cache line state */
-			mv		: 1,	/* mesi valid */
-			way		: 5,	/* Way in which the
-						 * error occurred
-						 */
-			wiv		: 1,	/* Way field valid */
-			reserved2	: 1,
-			dp		: 1,	/* Data poisoned on MBE */
-			reserved3	: 6,
-			hlth		: 2,	/* Health indicator */
-
-			index		: 20,	/* Cache line index */
-			reserved4	: 2,
-
-			is		: 1,	/* instruction set (1 == ia32) */
-			iv		: 1,	/* instruction set field valid */
-			pl		: 2,	/* privilege level */
-			pv		: 1,	/* privilege level field valid */
-			mcc		: 1,	/* Machine check corrected */
-			tv		: 1,	/* Target address
-						 * structure is valid
-						 */
-			rq		: 1,	/* Requester identifier
-						 * structure is valid
-						 */
-			rp		: 1,	/* Responder identifier
-						 * structure is valid
-						 */
-			pi		: 1;	/* Precise instruction pointer
-						 * structure is valid
-						 */
-} pal_cache_check_info_t;
-
-typedef struct pal_tlb_check_info_s {
-
-	u64		tr_slot		: 8,	/* Slot# of TR where
-						 * error occurred
-						 */
-			trv		: 1,	/* tr_slot field is valid */
-			reserved1	: 1,
-			level		: 2,	/* TLB level where failure occurred */
-			reserved2	: 4,
-			dtr		: 1,	/* Fail in data TR */
-			itr		: 1,	/* Fail in inst TR */
-			dtc		: 1,	/* Fail in data TC */
-			itc		: 1,	/* Fail in inst. TC */
-			op		: 4,	/* Cache operation */
-			reserved3	: 6,
-			hlth		: 2,	/* Health indicator */
-			reserved4	: 22,
-
-			is		: 1,	/* instruction set (1 == ia32) */
-			iv		: 1,	/* instruction set field valid */
-			pl		: 2,	/* privilege level */
-			pv		: 1,	/* privilege level field valid */
-			mcc		: 1,	/* Machine check corrected */
-			tv		: 1,	/* Target address
-						 * structure is valid
-						 */
-			rq		: 1,	/* Requester identifier
-						 * structure is valid
-						 */
-			rp		: 1,	/* Responder identifier
-						 * structure is valid
-						 */
-			pi		: 1;	/* Precise instruction pointer
-						 * structure is valid
-						 */
-} pal_tlb_check_info_t;
-
-typedef struct pal_bus_check_info_s {
-	u64		size		: 5,	/* Xaction size */
-			ib		: 1,	/* Internal bus error */
-			eb		: 1,	/* External bus error */
-			cc		: 1,	/* Error occurred
-						 * during cache-cache
-						 * transfer.
-						 */
-			type		: 8,	/* Bus xaction type*/
-			sev		: 5,	/* Bus error severity*/
-			hier		: 2,	/* Bus hierarchy level */
-			dp		: 1,	/* Data poisoned on MBE */
-			bsi		: 8,	/* Bus error status
-						 * info
-						 */
-			reserved2	: 22,
-
-			is		: 1,	/* instruction set (1 == ia32) */
-			iv		: 1,	/* instruction set field valid */
-			pl		: 2,	/* privilege level */
-			pv		: 1,	/* privilege level field valid */
-			mcc		: 1,	/* Machine check corrected */
-			tv		: 1,	/* Target address
-						 * structure is valid
-						 */
-			rq		: 1,	/* Requester identifier
-						 * structure is valid
-						 */
-			rp		: 1,	/* Responder identifier
-						 * structure is valid
-						 */
-			pi		: 1;	/* Precise instruction pointer
-						 * structure is valid
-						 */
-} pal_bus_check_info_t;
-
-typedef struct pal_reg_file_check_info_s {
-	u64		id		: 4,	/* Register file identifier */
-			op		: 4,	/* Type of register
-						 * operation that
-						 * caused the machine
-						 * check.
-						 */
-			reg_num		: 7,	/* Register number */
-			rnv		: 1,	/* reg_num valid */
-			reserved2	: 38,
-
-			is		: 1,	/* instruction set (1 == ia32) */
-			iv		: 1,	/* instruction set field valid */
-			pl		: 2,	/* privilege level */
-			pv		: 1,	/* privilege level field valid */
-			mcc		: 1,	/* Machine check corrected */
-			reserved3	: 3,
-			pi		: 1;	/* Precise instruction pointer
-						 * structure is valid
-						 */
-} pal_reg_file_check_info_t;
-
-typedef struct pal_uarch_check_info_s {
-	u64		sid		: 5,	/* Structure identification */
-			level		: 3,	/* Level of failure */
-			array_id	: 4,	/* Array identification */
-			op		: 4,	/* Type of
-						 * operation that
-						 * caused the machine
-						 * check.
-						 */
-			way		: 6,	/* Way of structure */
-			wv		: 1,	/* way valid */
-			xv		: 1,	/* index valid */
-			reserved1	: 6,
-			hlth		: 2,	/* Health indicator */
-			index		: 8,	/* Index or set of the uarch
-						 * structure that failed.
-						 */
-			reserved2	: 24,
-
-			is		: 1,	/* instruction set (1 == ia32) */
-			iv		: 1,	/* instruction set field valid */
-			pl		: 2,	/* privilege level */
-			pv		: 1,	/* privilege level field valid */
-			mcc		: 1,	/* Machine check corrected */
-			tv		: 1,	/* Target address
-						 * structure is valid
-						 */
-			rq		: 1,	/* Requester identifier
-						 * structure is valid
-						 */
-			rp		: 1,	/* Responder identifier
-						 * structure is valid
-						 */
-			pi		: 1;	/* Precise instruction pointer
-						 * structure is valid
-						 */
-} pal_uarch_check_info_t;
-
-typedef union pal_mc_error_info_u {
-	u64				pmei_data;
-	pal_processor_state_info_t	pme_processor;
-	pal_cache_check_info_t		pme_cache;
-	pal_tlb_check_info_t		pme_tlb;
-	pal_bus_check_info_t		pme_bus;
-	pal_reg_file_check_info_t	pme_reg_file;
-	pal_uarch_check_info_t		pme_uarch;
-} pal_mc_error_info_t;
-
-#define pmci_proc_unknown_check			pme_processor.uc
-#define pmci_proc_bus_check			pme_processor.bc
-#define pmci_proc_tlb_check			pme_processor.tc
-#define pmci_proc_cache_check			pme_processor.cc
-#define pmci_proc_dynamic_state_size		pme_processor.dsize
-#define pmci_proc_gpr_valid			pme_processor.gr
-#define pmci_proc_preserved_bank0_gpr_valid	pme_processor.b0
-#define pmci_proc_preserved_bank1_gpr_valid	pme_processor.b1
-#define pmci_proc_fp_valid			pme_processor.fp
-#define pmci_proc_predicate_regs_valid		pme_processor.pr
-#define pmci_proc_branch_regs_valid		pme_processor.br
-#define pmci_proc_app_regs_valid		pme_processor.ar
-#define pmci_proc_region_regs_valid		pme_processor.rr
-#define pmci_proc_translation_regs_valid	pme_processor.tr
-#define pmci_proc_debug_regs_valid		pme_processor.dr
-#define pmci_proc_perf_counters_valid		pme_processor.pc
-#define pmci_proc_control_regs_valid		pme_processor.cr
-#define pmci_proc_machine_check_expected	pme_processor.ex
-#define pmci_proc_machine_check_corrected	pme_processor.cm
-#define pmci_proc_rse_valid			pme_processor.rs
-#define pmci_proc_machine_check_or_init		pme_processor.in
-#define pmci_proc_dynamic_state_valid		pme_processor.dy
-#define pmci_proc_operation			pme_processor.op
-#define pmci_proc_trap_lost			pme_processor.tl
-#define pmci_proc_hardware_damage		pme_processor.hd
-#define pmci_proc_uncontained_storage_damage	pme_processor.us
-#define pmci_proc_machine_check_isolated	pme_processor.ci
-#define pmci_proc_continuable			pme_processor.co
-#define pmci_proc_storage_intergrity_synced	pme_processor.sy
-#define pmci_proc_min_state_save_area_regd	pme_processor.mn
-#define	pmci_proc_distinct_multiple_errors	pme_processor.me
-#define pmci_proc_pal_attempted_rendezvous	pme_processor.ra
-#define pmci_proc_pal_rendezvous_complete	pme_processor.rz
-
-
-#define pmci_cache_level			pme_cache.level
-#define pmci_cache_line_state			pme_cache.mesi
-#define pmci_cache_line_state_valid		pme_cache.mv
-#define pmci_cache_line_index			pme_cache.index
-#define pmci_cache_instr_cache_fail		pme_cache.ic
-#define pmci_cache_data_cache_fail		pme_cache.dc
-#define pmci_cache_line_tag_fail		pme_cache.tl
-#define pmci_cache_line_data_fail		pme_cache.dl
-#define pmci_cache_operation			pme_cache.op
-#define pmci_cache_way_valid			pme_cache.wv
-#define pmci_cache_target_address_valid		pme_cache.tv
-#define pmci_cache_way				pme_cache.way
-#define pmci_cache_mc				pme_cache.mc
-
-#define pmci_tlb_instr_translation_cache_fail	pme_tlb.itc
-#define pmci_tlb_data_translation_cache_fail	pme_tlb.dtc
-#define pmci_tlb_instr_translation_reg_fail	pme_tlb.itr
-#define pmci_tlb_data_translation_reg_fail	pme_tlb.dtr
-#define pmci_tlb_translation_reg_slot		pme_tlb.tr_slot
-#define pmci_tlb_mc				pme_tlb.mc
-
-#define pmci_bus_status_info			pme_bus.bsi
-#define pmci_bus_req_address_valid		pme_bus.rq
-#define pmci_bus_resp_address_valid		pme_bus.rp
-#define pmci_bus_target_address_valid		pme_bus.tv
-#define pmci_bus_error_severity			pme_bus.sev
-#define pmci_bus_transaction_type		pme_bus.type
-#define pmci_bus_cache_cache_transfer		pme_bus.cc
-#define pmci_bus_transaction_size		pme_bus.size
-#define pmci_bus_internal_error			pme_bus.ib
-#define pmci_bus_external_error			pme_bus.eb
-#define pmci_bus_mc				pme_bus.mc
-
-/*
- * NOTE: this min_state_save area struct only includes the 1KB
- * architectural state save area.  The other 3 KB is scratch space
- * for PAL.
- */
-
-typedef struct pal_min_state_area_s {
-	u64	pmsa_nat_bits;		/* nat bits for saved GRs  */
-	u64	pmsa_gr[15];		/* GR1	- GR15		   */
-	u64	pmsa_bank0_gr[16];	/* GR16 - GR31		   */
-	u64	pmsa_bank1_gr[16];	/* GR16 - GR31		   */
-	u64	pmsa_pr;		/* predicate registers	   */
-	u64	pmsa_br0;		/* branch register 0	   */
-	u64	pmsa_rsc;		/* ar.rsc		   */
-	u64	pmsa_iip;		/* cr.iip		   */
-	u64	pmsa_ipsr;		/* cr.ipsr		   */
-	u64	pmsa_ifs;		/* cr.ifs		   */
-	u64	pmsa_xip;		/* previous iip		   */
-	u64	pmsa_xpsr;		/* previous psr		   */
-	u64	pmsa_xfs;		/* previous ifs		   */
-	u64	pmsa_br1;		/* branch register 1	   */
-	u64	pmsa_reserved[70];	/* pal_min_state_area should total to 1KB */
-} pal_min_state_area_t;
-
-
-struct ia64_pal_retval {
-	/*
-	 * A zero status value indicates call completed without error.
-	 * A negative status value indicates reason of call failure.
-	 * A positive status value indicates success but an
-	 * informational value should be printed (e.g., "reboot for
-	 * change to take effect").
-	 */
-	s64 status;
-	u64 v0;
-	u64 v1;
-	u64 v2;
-};
-
-/*
- * Note: Currently unused PAL arguments are generally labeled
- * "reserved" so the value specified in the PAL documentation
- * (generally 0) MUST be passed.  Reserved parameters are not optional
- * parameters.
- */
-extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64);
-extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64);
-extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64);
-extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64);
-extern void ia64_save_scratch_fpregs (struct ia64_fpreg *);
-extern void ia64_load_scratch_fpregs (struct ia64_fpreg *);
-
-#define PAL_CALL(iprv,a0,a1,a2,a3) do {			\
-	struct ia64_fpreg fr[6];			\
-	ia64_save_scratch_fpregs(fr);			\
-	iprv = ia64_pal_call_static(a0, a1, a2, a3);	\
-	ia64_load_scratch_fpregs(fr);			\
-} while (0)
-
-#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do {		\
-	struct ia64_fpreg fr[6];			\
-	ia64_save_scratch_fpregs(fr);			\
-	iprv = ia64_pal_call_stacked(a0, a1, a2, a3);	\
-	ia64_load_scratch_fpregs(fr);			\
-} while (0)
-
-#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do {			\
-	struct ia64_fpreg fr[6];				\
-	ia64_save_scratch_fpregs(fr);				\
-	iprv = ia64_pal_call_phys_static(a0, a1, a2, a3);	\
-	ia64_load_scratch_fpregs(fr);				\
-} while (0)
-
-#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do {		\
-	struct ia64_fpreg fr[6];				\
-	ia64_save_scratch_fpregs(fr);				\
-	iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3);	\
-	ia64_load_scratch_fpregs(fr);				\
-} while (0)
-
-typedef int (*ia64_pal_handler) (u64, ...);
-extern ia64_pal_handler ia64_pal;
-extern void ia64_pal_handler_init (void *);
-
-extern ia64_pal_handler ia64_pal;
-
-extern pal_cache_config_info_t		l0d_cache_config_info;
-extern pal_cache_config_info_t		l0i_cache_config_info;
-extern pal_cache_config_info_t		l1_cache_config_info;
-extern pal_cache_config_info_t		l2_cache_config_info;
-
-extern pal_cache_protection_info_t	l0d_cache_protection_info;
-extern pal_cache_protection_info_t	l0i_cache_protection_info;
-extern pal_cache_protection_info_t	l1_cache_protection_info;
-extern pal_cache_protection_info_t	l2_cache_protection_info;
-
-extern pal_cache_config_info_t		pal_cache_config_info_get(pal_cache_level_t,
-								  pal_cache_type_t);
-
-extern pal_cache_protection_info_t	pal_cache_protection_info_get(pal_cache_level_t,
-								      pal_cache_type_t);
-
-
-extern void				pal_error(int);
-
-
-/* Useful wrappers for the current list of pal procedures */
-
-typedef union pal_bus_features_u {
-	u64	pal_bus_features_val;
-	struct {
-		u64	pbf_reserved1				:	29;
-		u64	pbf_req_bus_parking			:	1;
-		u64	pbf_bus_lock_mask			:	1;
-		u64	pbf_enable_half_xfer_rate		:	1;
-		u64	pbf_reserved2				:	20;
-		u64	pbf_enable_shared_line_replace		:	1;
-		u64	pbf_enable_exclusive_line_replace	:	1;
-		u64	pbf_disable_xaction_queueing		:	1;
-		u64	pbf_disable_resp_err_check		:	1;
-		u64	pbf_disable_berr_check			:	1;
-		u64	pbf_disable_bus_req_internal_err_signal	:	1;
-		u64	pbf_disable_bus_req_berr_signal		:	1;
-		u64	pbf_disable_bus_init_event_check	:	1;
-		u64	pbf_disable_bus_init_event_signal	:	1;
-		u64	pbf_disable_bus_addr_err_check		:	1;
-		u64	pbf_disable_bus_addr_err_signal		:	1;
-		u64	pbf_disable_bus_data_err_check		:	1;
-	} pal_bus_features_s;
-} pal_bus_features_u_t;
-
-extern void pal_bus_features_print (u64);
-
-/* Provide information about configurable processor bus features */
-static inline s64
-ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail,
-			   pal_bus_features_u_t *features_status,
-			   pal_bus_features_u_t *features_control)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0);
-	if (features_avail)
-		features_avail->pal_bus_features_val = iprv.v0;
-	if (features_status)
-		features_status->pal_bus_features_val = iprv.v1;
-	if (features_control)
-		features_control->pal_bus_features_val = iprv.v2;
-	return iprv.status;
-}
-
-/* Enables/disables specific processor bus features */
-static inline s64
-ia64_pal_bus_set_features (pal_bus_features_u_t feature_select)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0);
-	return iprv.status;
-}
-
-/* Get detailed cache information */
-static inline s64
-ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf)
-{
-	struct ia64_pal_retval iprv;
-
-	PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0);
-
-	if (iprv.status == 0) {
-		conf->pcci_status                 = iprv.status;
-		conf->pcci_info_1.pcci1_data      = iprv.v0;
-		conf->pcci_info_2.pcci2_data      = iprv.v1;
-		conf->pcci_reserved               = iprv.v2;
-	}
-	return iprv.status;
-
-}
-
-/* Get detailed cche protection information */
-static inline s64
-ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot)
-{
-	struct ia64_pal_retval iprv;
-
-	PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0);
-
-	if (iprv.status == 0) {
-		prot->pcpi_status           = iprv.status;
-		prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff;
-		prot->pcp_info[1].pcpi_data = iprv.v0 >> 32;
-		prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff;
-		prot->pcp_info[3].pcpi_data = iprv.v1 >> 32;
-		prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff;
-		prot->pcp_info[5].pcpi_data = iprv.v2 >> 32;
-	}
-	return iprv.status;
-}
-
-/*
- * Flush the processor instruction or data caches.  *PROGRESS must be
- * initialized to zero before calling this for the first time..
- */
-static inline s64
-ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
-	if (vector)
-		*vector = iprv.v0;
-	*progress = iprv.v1;
-	return iprv.status;
-}
-
-
-/* Initialize the processor controlled caches */
-static inline s64
-ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest);
-	return iprv.status;
-}
-
-/* Initialize the tags and data of a data or unified cache line of
- * processor controlled cache to known values without the availability
- * of backing memory.
- */
-static inline s64
-ia64_pal_cache_line_init (u64 physical_addr, u64 data_value)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0);
-	return iprv.status;
-}
-
-
-/* Read the data and tag of a processor controlled cache line for diags */
-static inline s64
-ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS_STK(iprv, PAL_CACHE_READ, line_id.pclid_data,
-				physical_addr, 0);
-	return iprv.status;
-}
-
-/* Return summary information about the hierarchy of caches controlled by the processor */
-static inline s64
-ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0);
-	if (cache_levels)
-		*cache_levels = iprv.v0;
-	if (unique_caches)
-		*unique_caches = iprv.v1;
-	return iprv.status;
-}
-
-/* Write the data and tag of a processor-controlled cache line for diags */
-static inline s64
-ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS_STK(iprv, PAL_CACHE_WRITE, line_id.pclid_data,
-				physical_addr, data);
-	return iprv.status;
-}
-
-
-/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */
-static inline s64
-ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics,
-		    u64 *buffer_size, u64 *buffer_align)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics);
-	if (buffer_size)
-		*buffer_size = iprv.v0;
-	if (buffer_align)
-		*buffer_align = iprv.v1;
-	return iprv.status;
-}
-
-/* Copy relocatable PAL procedures from ROM to memory */
-static inline s64
-ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor);
-	if (pal_proc_offset)
-		*pal_proc_offset = iprv.v0;
-	return iprv.status;
-}
-
-/* Return the number of instruction and data debug register pairs */
-static inline s64
-ia64_pal_debug_info (u64 *inst_regs,  u64 *data_regs)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0);
-	if (inst_regs)
-		*inst_regs = iprv.v0;
-	if (data_regs)
-		*data_regs = iprv.v1;
-
-	return iprv.status;
-}
-
-#ifdef TBD
-/* Switch from IA64-system environment to IA-32 system environment */
-static inline s64
-ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3);
-	return iprv.status;
-}
-#endif
-
-/* Get unique geographical address of this processor on its bus */
-static inline s64
-ia64_pal_fixed_addr (u64 *global_unique_addr)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0);
-	if (global_unique_addr)
-		*global_unique_addr = iprv.v0;
-	return iprv.status;
-}
-
-/* Get base frequency of the platform if generated by the processor */
-static inline s64
-ia64_pal_freq_base (u64 *platform_base_freq)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0);
-	if (platform_base_freq)
-		*platform_base_freq = iprv.v0;
-	return iprv.status;
-}
-
-/*
- * Get the ratios for processor frequency, bus frequency and interval timer to
- * to base frequency of the platform
- */
-static inline s64
-ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio,
-		      struct pal_freq_ratio *itc_ratio)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0);
-	if (proc_ratio)
-		*(u64 *)proc_ratio = iprv.v0;
-	if (bus_ratio)
-		*(u64 *)bus_ratio = iprv.v1;
-	if (itc_ratio)
-		*(u64 *)itc_ratio = iprv.v2;
-	return iprv.status;
-}
-
-/*
- * Get the current hardware resource sharing policy of the processor
- */
-static inline s64
-ia64_pal_get_hw_policy (u64 proc_num, u64 *cur_policy, u64 *num_impacted,
-			u64 *la)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_GET_HW_POLICY, proc_num, 0, 0);
-	if (cur_policy)
-		*cur_policy = iprv.v0;
-	if (num_impacted)
-		*num_impacted = iprv.v1;
-	if (la)
-		*la = iprv.v2;
-	return iprv.status;
-}
-
-/* Make the processor enter HALT or one of the implementation dependent low
- * power states where prefetching and execution are suspended and cache and
- * TLB coherency is not maintained.
- */
-static inline s64
-ia64_pal_halt (u64 halt_state)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0);
-	return iprv.status;
-}
-
-typedef union pal_power_mgmt_info_u {
-	u64			ppmi_data;
-	struct {
-	       u64		exit_latency		: 16,
-				entry_latency		: 16,
-				power_consumption	: 28,
-				im			: 1,
-				co			: 1,
-				reserved		: 2;
-	} pal_power_mgmt_info_s;
-} pal_power_mgmt_info_u_t;
-
-/* Return information about processor's optional power management capabilities. */
-static inline s64
-ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0);
-	return iprv.status;
-}
-
-/* Get the current P-state information */
-static inline s64
-ia64_pal_get_pstate (u64 *pstate_index, unsigned long type)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_STK(iprv, PAL_GET_PSTATE, type, 0, 0);
-	*pstate_index = iprv.v0;
-	return iprv.status;
-}
-
-/* Set the P-state */
-static inline s64
-ia64_pal_set_pstate (u64 pstate_index)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0);
-	return iprv.status;
-}
-
-/* Processor branding information*/
-static inline s64
-ia64_pal_get_brand_info (char *brand_info)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_STK(iprv, PAL_BRAND_INFO, 0, (u64)brand_info, 0);
-	return iprv.status;
-}
-
-/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are
- * suspended, but cache and TLB coherency is maintained.
- */
-static inline s64
-ia64_pal_halt_light (void)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0);
-	return iprv.status;
-}
-
-/* Clear all the processor error logging   registers and reset the indicator that allows
- * the error logging registers to be written. This procedure also checks the pending
- * machine check bit and pending INIT bit and reports their states.
- */
-static inline s64
-ia64_pal_mc_clear_log (u64 *pending_vector)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0);
-	if (pending_vector)
-		*pending_vector = iprv.v0;
-	return iprv.status;
-}
-
-/* Ensure that all outstanding transactions in a processor are completed or that any
- * MCA due to thes outstanding transaction is taken.
- */
-static inline s64
-ia64_pal_mc_drain (void)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0);
-	return iprv.status;
-}
-
-/* Return the machine check dynamic processor state */
-static inline s64
-ia64_pal_mc_dynamic_state (u64 info_type, u64 dy_buffer, u64 *size)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, info_type, dy_buffer, 0);
-	if (size)
-		*size = iprv.v0;
-	return iprv.status;
-}
-
-/* Return processor machine check information */
-static inline s64
-ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0);
-	if (size)
-		*size = iprv.v0;
-	if (error_info)
-		*error_info = iprv.v1;
-	return iprv.status;
-}
-
-/* Injects the requested processor error or returns info on
- * supported injection capabilities for current processor implementation
- */
-static inline s64
-ia64_pal_mc_error_inject_phys (u64 err_type_info, u64 err_struct_info,
-			u64 err_data_buffer, u64 *capabilities, u64 *resources)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info,
-			  err_struct_info, err_data_buffer);
-	if (capabilities)
-		*capabilities= iprv.v0;
-	if (resources)
-		*resources= iprv.v1;
-	return iprv.status;
-}
-
-static inline s64
-ia64_pal_mc_error_inject_virt (u64 err_type_info, u64 err_struct_info,
-			u64 err_data_buffer, u64 *capabilities, u64 *resources)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info,
-			  err_struct_info, err_data_buffer);
-	if (capabilities)
-		*capabilities= iprv.v0;
-	if (resources)
-		*resources= iprv.v1;
-	return iprv.status;
-}
-
-/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot
- * attempt to correct any expected machine checks.
- */
-static inline s64
-ia64_pal_mc_expected (u64 expected, u64 *previous)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0);
-	if (previous)
-		*previous = iprv.v0;
-	return iprv.status;
-}
-
-typedef union pal_hw_tracking_u {
-	u64			pht_data;
-	struct {
-		u64		itc	:4,	/* Instruction cache tracking */
-				dct	:4,	/* Date cache tracking */
-				itt	:4,	/* Instruction TLB tracking */
-				ddt	:4,	/* Data TLB tracking */
-				reserved:48;
-	} pal_hw_tracking_s;
-} pal_hw_tracking_u_t;
-
-/*
- * Hardware tracking status.
- */
-static inline s64
-ia64_pal_mc_hw_tracking (u64 *status)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_HW_TRACKING, 0, 0, 0);
-	if (status)
-		*status = iprv.v0;
-	return iprv.status;
-}
-
-/* Register a platform dependent location with PAL to which it can save
- * minimal processor state in the event of a machine check or initialization
- * event.
- */
-static inline s64
-ia64_pal_mc_register_mem (u64 physical_addr, u64 size, u64 *req_size)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, size, 0);
-	if (req_size)
-		*req_size = iprv.v0;
-	return iprv.status;
-}
-
-/* Restore minimal architectural processor state, set CMC interrupt if necessary
- * and resume execution
- */
-static inline s64
-ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0);
-	return iprv.status;
-}
-
-/* Return the memory attributes implemented by the processor */
-static inline s64
-ia64_pal_mem_attrib (u64 *mem_attrib)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0);
-	if (mem_attrib)
-		*mem_attrib = iprv.v0 & 0xff;
-	return iprv.status;
-}
-
-/* Return the amount of memory needed for second phase of processor
- * self-test and the required alignment of memory.
- */
-static inline s64
-ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0);
-	if (bytes_needed)
-		*bytes_needed = iprv.v0;
-	if (alignment)
-		*alignment = iprv.v1;
-	return iprv.status;
-}
-
-typedef union pal_perf_mon_info_u {
-	u64			  ppmi_data;
-	struct {
-	       u64		generic		: 8,
-				width		: 8,
-				cycles		: 8,
-				retired		: 8,
-				reserved	: 32;
-	} pal_perf_mon_info_s;
-} pal_perf_mon_info_u_t;
-
-/* Return the performance monitor information about what can be counted
- * and how to configure the monitors to count the desired events.
- */
-static inline s64
-ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0);
-	if (pm_info)
-		pm_info->ppmi_data = iprv.v0;
-	return iprv.status;
-}
-
-/* Specifies the physical address of the processor interrupt block
- * and I/O port space.
- */
-static inline s64
-ia64_pal_platform_addr (u64 type, u64 physical_addr)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0);
-	return iprv.status;
-}
-
-/* Set the SAL PMI entrypoint in memory */
-static inline s64
-ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0);
-	return iprv.status;
-}
-
-struct pal_features_s;
-/* Provide information about configurable processor features */
-static inline s64
-ia64_pal_proc_get_features (u64 *features_avail,
-			    u64 *features_status,
-			    u64 *features_control,
-			    u64 features_set)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, features_set, 0);
-	if (iprv.status == 0) {
-		*features_avail   = iprv.v0;
-		*features_status  = iprv.v1;
-		*features_control = iprv.v2;
-	}
-	return iprv.status;
-}
-
-/* Enable/disable processor dependent features */
-static inline s64
-ia64_pal_proc_set_features (u64 feature_select)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0);
-	return iprv.status;
-}
-
-/*
- * Put everything in a struct so we avoid the global offset table whenever
- * possible.
- */
-typedef struct ia64_ptce_info_s {
-	u64		base;
-	u32		count[2];
-	u32		stride[2];
-} ia64_ptce_info_t;
-
-/* Return the information required for the architected loop used to purge
- * (initialize) the entire TC
- */
-static inline s64
-ia64_get_ptce (ia64_ptce_info_t *ptce)
-{
-	struct ia64_pal_retval iprv;
-
-	if (!ptce)
-		return -1;
-
-	PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0);
-	if (iprv.status == 0) {
-		ptce->base = iprv.v0;
-		ptce->count[0] = iprv.v1 >> 32;
-		ptce->count[1] = iprv.v1 & 0xffffffff;
-		ptce->stride[0] = iprv.v2 >> 32;
-		ptce->stride[1] = iprv.v2 & 0xffffffff;
-	}
-	return iprv.status;
-}
-
-/* Return info about implemented application and control registers. */
-static inline s64
-ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0);
-	if (reg_info_1)
-		*reg_info_1 = iprv.v0;
-	if (reg_info_2)
-		*reg_info_2 = iprv.v1;
-	return iprv.status;
-}
-
-typedef union pal_hints_u {
-	u64			ph_data;
-	struct {
-	       u64		si		: 1,
-				li		: 1,
-				reserved	: 62;
-	} pal_hints_s;
-} pal_hints_u_t;
-
-/* Return information about the register stack and RSE for this processor
- * implementation.
- */
-static inline s64
-ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0);
-	if (num_phys_stacked)
-		*num_phys_stacked = iprv.v0;
-	if (hints)
-		hints->ph_data = iprv.v1;
-	return iprv.status;
-}
-
-/*
- * Set the current hardware resource sharing policy of the processor
- */
-static inline s64
-ia64_pal_set_hw_policy (u64 policy)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_SET_HW_POLICY, policy, 0, 0);
-	return iprv.status;
-}
-
-/* Cause the processor to enter	SHUTDOWN state, where prefetching and execution are
- * suspended, but cause cache and TLB coherency to be maintained.
- * This is usually called in IA-32 mode.
- */
-static inline s64
-ia64_pal_shutdown (void)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0);
-	return iprv.status;
-}
-
-/* Perform the second phase of processor self-test. */
-static inline s64
-ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes);
-	if (self_test_state)
-		*self_test_state = iprv.v0;
-	return iprv.status;
-}
-
-typedef union  pal_version_u {
-	u64	pal_version_val;
-	struct {
-		u64	pv_pal_b_rev		:	8;
-		u64	pv_pal_b_model		:	8;
-		u64	pv_reserved1		:	8;
-		u64	pv_pal_vendor		:	8;
-		u64	pv_pal_a_rev		:	8;
-		u64	pv_pal_a_model		:	8;
-		u64	pv_reserved2		:	16;
-	} pal_version_s;
-} pal_version_u_t;
-
-
-/*
- * Return PAL version information.  While the documentation states that
- * PAL_VERSION can be called in either physical or virtual mode, some
- * implementations only allow physical calls.  We don't call it very often,
- * so the overhead isn't worth eliminating.
- */
-static inline s64
-ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0);
-	if (pal_min_version)
-		pal_min_version->pal_version_val = iprv.v0;
-
-	if (pal_cur_version)
-		pal_cur_version->pal_version_val = iprv.v1;
-
-	return iprv.status;
-}
-
-typedef union pal_tc_info_u {
-	u64			pti_val;
-	struct {
-	       u64		num_sets	:	8,
-				associativity	:	8,
-				num_entries	:	16,
-				pf		:	1,
-				unified		:	1,
-				reduce_tr	:	1,
-				reserved	:	29;
-	} pal_tc_info_s;
-} pal_tc_info_u_t;
-
-#define tc_reduce_tr		pal_tc_info_s.reduce_tr
-#define tc_unified		pal_tc_info_s.unified
-#define tc_pf			pal_tc_info_s.pf
-#define tc_num_entries		pal_tc_info_s.num_entries
-#define tc_associativity	pal_tc_info_s.associativity
-#define tc_num_sets		pal_tc_info_s.num_sets
-
-
-/* Return information about the virtual memory characteristics of the processor
- * implementation.
- */
-static inline s64
-ia64_pal_vm_info (u64 tc_level, u64 tc_type,  pal_tc_info_u_t *tc_info, u64 *tc_pages)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0);
-	if (tc_info)
-		tc_info->pti_val = iprv.v0;
-	if (tc_pages)
-		*tc_pages = iprv.v1;
-	return iprv.status;
-}
-
-/* Get page size information about the virtual memory characteristics of the processor
- * implementation.
- */
-static inline s64
-ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0);
-	if (tr_pages)
-		*tr_pages = iprv.v0;
-	if (vw_pages)
-		*vw_pages = iprv.v1;
-	return iprv.status;
-}
-
-typedef union pal_vm_info_1_u {
-	u64			pvi1_val;
-	struct {
-		u64		vw		: 1,
-				phys_add_size	: 7,
-				key_size	: 8,
-				max_pkr		: 8,
-				hash_tag_id	: 8,
-				max_dtr_entry	: 8,
-				max_itr_entry	: 8,
-				max_unique_tcs	: 8,
-				num_tc_levels	: 8;
-	} pal_vm_info_1_s;
-} pal_vm_info_1_u_t;
-
-#define PAL_MAX_PURGES		0xFFFF		/* all ones is means unlimited */
-
-typedef union pal_vm_info_2_u {
-	u64			pvi2_val;
-	struct {
-		u64		impl_va_msb	: 8,
-				rid_size	: 8,
-				max_purges	: 16,
-				reserved	: 32;
-	} pal_vm_info_2_s;
-} pal_vm_info_2_u_t;
-
-/* Get summary information about the virtual memory characteristics of the processor
- * implementation.
- */
-static inline s64
-ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0);
-	if (vm_info_1)
-		vm_info_1->pvi1_val = iprv.v0;
-	if (vm_info_2)
-		vm_info_2->pvi2_val = iprv.v1;
-	return iprv.status;
-}
-
-typedef union pal_vp_info_u {
-	u64			pvi_val;
-	struct {
-		u64		index:		48,	/* virtual feature set info */
-				vmm_id:		16;	/* feature set id */
-	} pal_vp_info_s;
-} pal_vp_info_u_t;
-
-/*
- * Returns infomation about virtual processor features
- */
-static inline s64
-ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_VP_INFO, feature_set, vp_buffer, 0);
-	if (vp_info)
-		*vp_info = iprv.v0;
-	if (vmm_id)
-		*vmm_id = iprv.v1;
-	return iprv.status;
-}
-
-typedef union pal_itr_valid_u {
-	u64			piv_val;
-	struct {
-	       u64		access_rights_valid	: 1,
-				priv_level_valid	: 1,
-				dirty_bit_valid		: 1,
-				mem_attr_valid		: 1,
-				reserved		: 60;
-	} pal_tr_valid_s;
-} pal_tr_valid_u_t;
-
-/* Read a translation register */
-static inline s64
-ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
-	if (tr_valid)
-		tr_valid->piv_val = iprv.v0;
-	return iprv.status;
-}
-
-/*
- * PAL_PREFETCH_VISIBILITY transaction types
- */
-#define PAL_VISIBILITY_VIRTUAL		0
-#define PAL_VISIBILITY_PHYSICAL		1
-
-/*
- * PAL_PREFETCH_VISIBILITY return codes
- */
-#define PAL_VISIBILITY_OK		1
-#define PAL_VISIBILITY_OK_REMOTE_NEEDED	0
-#define PAL_VISIBILITY_INVAL_ARG	-2
-#define PAL_VISIBILITY_ERROR		-3
-
-static inline s64
-ia64_pal_prefetch_visibility (s64 trans_type)
-{
-	struct ia64_pal_retval iprv;
-	PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0);
-	return iprv.status;
-}
-
-/* data structure for getting information on logical to physical mappings */
-typedef union pal_log_overview_u {
-	struct {
-		u64	num_log		:16,	/* Total number of logical
-						 * processors on this die
-						 */
-			tpc		:8,	/* Threads per core */
-			reserved3	:8,	/* Reserved */
-			cpp		:8,	/* Cores per processor */
-			reserved2	:8,	/* Reserved */
-			ppid		:8,	/* Physical processor ID */
-			reserved1	:8;	/* Reserved */
-	} overview_bits;
-	u64 overview_data;
-} pal_log_overview_t;
-
-typedef union pal_proc_n_log_info1_u{
-	struct {
-		u64	tid		:16,	/* Thread id */
-			reserved2	:16,	/* Reserved */
-			cid		:16,	/* Core id */
-			reserved1	:16;	/* Reserved */
-	} ppli1_bits;
-	u64	ppli1_data;
-} pal_proc_n_log_info1_t;
-
-typedef union pal_proc_n_log_info2_u {
-	struct {
-		u64	la		:16,	/* Logical address */
-			reserved	:48;	/* Reserved */
-	} ppli2_bits;
-	u64	ppli2_data;
-} pal_proc_n_log_info2_t;
-
-typedef struct pal_logical_to_physical_s
-{
-	pal_log_overview_t overview;
-	pal_proc_n_log_info1_t ppli1;
-	pal_proc_n_log_info2_t ppli2;
-} pal_logical_to_physical_t;
-
-#define overview_num_log	overview.overview_bits.num_log
-#define overview_tpc		overview.overview_bits.tpc
-#define overview_cpp		overview.overview_bits.cpp
-#define overview_ppid		overview.overview_bits.ppid
-#define log1_tid		ppli1.ppli1_bits.tid
-#define log1_cid		ppli1.ppli1_bits.cid
-#define log2_la			ppli2.ppli2_bits.la
-
-/* Get information on logical to physical processor mappings. */
-static inline s64
-ia64_pal_logical_to_phys(u64 proc_number, pal_logical_to_physical_t *mapping)
-{
-	struct ia64_pal_retval iprv;
-
-	PAL_CALL(iprv, PAL_LOGICAL_TO_PHYSICAL, proc_number, 0, 0);
-
-	if (iprv.status == PAL_STATUS_SUCCESS)
-	{
-		mapping->overview.overview_data = iprv.v0;
-		mapping->ppli1.ppli1_data = iprv.v1;
-		mapping->ppli2.ppli2_data = iprv.v2;
-	}
-
-	return iprv.status;
-}
-
-typedef struct pal_cache_shared_info_s
-{
-	u64 num_shared;
-	pal_proc_n_log_info1_t ppli1;
-	pal_proc_n_log_info2_t ppli2;
-} pal_cache_shared_info_t;
-
-/* Get information on logical to physical processor mappings. */
-static inline s64
-ia64_pal_cache_shared_info(u64 level,
-		u64 type,
-		u64 proc_number,
-		pal_cache_shared_info_t *info)
-{
-	struct ia64_pal_retval iprv;
-
-	PAL_CALL(iprv, PAL_CACHE_SHARED_INFO, level, type, proc_number);
-
-	if (iprv.status == PAL_STATUS_SUCCESS) {
-		info->num_shared = iprv.v0;
-		info->ppli1.ppli1_data = iprv.v1;
-		info->ppli2.ppli2_data = iprv.v2;
-	}
-
-	return iprv.status;
-}
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_IA64_PAL_H */
diff --git a/include/asm-ia64/param.h b/include/asm-ia64/param.h
deleted file mode 100644
index 0964c32c1358..000000000000
--- a/include/asm-ia64/param.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASM_IA64_PARAM_H
-#define _ASM_IA64_PARAM_H
-
-/*
- * Fundamental kernel parameters.
- *
- * Based on <asm-i386/param.h>.
- *
- * Modified 1998, 1999, 2002-2003
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#define EXEC_PAGESIZE	65536
-
-#ifndef NOGROUP
-# define NOGROUP	(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ
-# define USER_HZ	HZ
-# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
-#else
-   /*
-    * Technically, this is wrong, but some old apps still refer to it.  The proper way to
-    * get the HZ value is via sysconf(_SC_CLK_TCK).
-    */
-# define HZ 1024
-#endif
-
-#endif /* _ASM_IA64_PARAM_H */
diff --git a/include/asm-ia64/parport.h b/include/asm-ia64/parport.h
deleted file mode 100644
index 67e16adfcd25..000000000000
--- a/include/asm-ia64/parport.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * parport.h: platform-specific PC-style parport initialisation
- *
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef _ASM_IA64_PARPORT_H
-#define _ASM_IA64_PARPORT_H 1
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-
-static int __devinit
-parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports(autoirq, autodma);
-}
-
-#endif /* _ASM_IA64_PARPORT_H */
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
deleted file mode 100644
index 295fe6ab4584..000000000000
--- a/include/asm-ia64/patch.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASM_IA64_PATCH_H
-#define _ASM_IA64_PATCH_H
-
-/*
- * Copyright (C) 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * There are a number of reasons for patching instructions.  Rather than duplicating code
- * all over the place, we put the common stuff here.  Reasons for patching: in-kernel
- * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate
- * shared library.  Undoubtedly, some of these reasons will disappear and others will
- * be added over time.
- */
-#include <linux/elf.h>
-#include <linux/types.h>
-
-extern void ia64_patch (u64 insn_addr, u64 mask, u64 val);	/* patch any insn slot */
-extern void ia64_patch_imm64 (u64 insn_addr, u64 val);		/* patch "movl" w/abs. value*/
-extern void ia64_patch_imm60 (u64 insn_addr, u64 val);		/* patch "brl" w/ip-rel value */
-
-extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
-extern void ia64_patch_vtop (unsigned long start, unsigned long end);
-extern void ia64_patch_phys_stack_reg(unsigned long val);
-extern void ia64_patch_rse (unsigned long start, unsigned long end);
-extern void ia64_patch_gate (void);
-
-#endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
deleted file mode 100644
index 0149097b736d..000000000000
--- a/include/asm-ia64/pci.h
+++ /dev/null
@@ -1,167 +0,0 @@
-#ifndef _ASM_IA64_PCI_H
-#define _ASM_IA64_PCI_H
-
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/scatterlist.h>
-#include <asm/hw_irq.h>
-
-/*
- * Can be used to override the logic in pci_scan_bus for skipping already-configured bus
- * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the
- * loader.
- */
-#define pcibios_assign_all_busses()     0
-#define pcibios_scan_all_fns(a, b)	0
-
-#define PCIBIOS_MIN_IO		0x1000
-#define PCIBIOS_MIN_MEM		0x10000000
-
-void pcibios_config_init(void);
-
-struct pci_dev;
-
-/*
- * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct
- * correspondence between device bus addresses and CPU physical addresses.
- * Platforms with a hardware I/O MMU _must_ turn this off to suppress the
- * bounce buffer handling code in the block and network device layers.
- * Platforms with separate bus address spaces _must_ turn this off and provide
- * a device DMA mapping implementation that takes care of the necessary
- * address translation.
- *
- * For now, the ia64 platforms which may have separate/multiple bus address
- * spaces all have I/O MMUs which support the merging of physically
- * discontiguous buffers, so we can use that as the sole factor to determine
- * the setting of PCI_DMA_BUS_IS_PHYS.
- */
-extern unsigned long ia64_max_iommu_merge_mask;
-#define PCI_DMA_BUS_IS_PHYS	(ia64_max_iommu_merge_mask == ~0UL)
-
-static inline void
-pcibios_set_master (struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-static inline void
-pcibios_penalize_isa_irq (int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-#include <asm-generic/pci-dma-compat.h>
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	unsigned long cacheline_size;
-	u8 byte;
-
-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
-	if (byte == 0)
-		cacheline_size = 1024;
-	else
-		cacheline_size = (int) byte * 4;
-
-	*strat = PCI_DMA_BURST_MULTIPLE;
-	*strategy_parameter = cacheline_size;
-}
-#endif
-
-#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
-				enum pci_mmap_state mmap_state, int write_combine);
-#define HAVE_PCI_LEGACY
-extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
-				      struct vm_area_struct *vma);
-extern ssize_t pci_read_legacy_io(struct kobject *kobj,
-				  struct bin_attribute *bin_attr,
-				  char *buf, loff_t off, size_t count);
-extern ssize_t pci_write_legacy_io(struct kobject *kobj,
-				   struct bin_attribute *bin_attr,
-				   char *buf, loff_t off, size_t count);
-extern int pci_mmap_legacy_mem(struct kobject *kobj,
-			       struct bin_attribute *attr,
-			       struct vm_area_struct *vma);
-
-#define pci_get_legacy_mem platform_pci_get_legacy_mem
-#define pci_legacy_read platform_pci_legacy_read
-#define pci_legacy_write platform_pci_legacy_write
-
-struct pci_window {
-	struct resource resource;
-	u64 offset;
-};
-
-struct pci_controller {
-	void *acpi_handle;
-	void *iommu;
-	int segment;
-	int node;		/* nearest node with memory or -1 for global allocation */
-
-	unsigned int windows;
-	struct pci_window *window;
-
-	void *platform_data;
-};
-
-#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata)
-#define pci_domain_nr(busdev)    (PCI_CONTROLLER(busdev)->segment)
-
-extern struct pci_ops pci_root_ops;
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-	return (pci_domain_nr(bus) != 0);
-}
-
-extern void pcibios_resource_to_bus(struct pci_dev *dev,
-		struct pci_bus_region *region, struct resource *res);
-
-extern void pcibios_bus_to_resource(struct pci_dev *dev,
-		struct resource *res, struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
-#define pcibios_scan_all_fns(a, b)	0
-
-#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
-}
-
-#endif /* _ASM_IA64_PCI_H */
diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h
deleted file mode 100644
index 77f30b664b4e..000000000000
--- a/include/asm-ia64/percpu.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_IA64_PERCPU_H
-#define _ASM_IA64_PERCPU_H
-
-/*
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
-
-#ifdef __ASSEMBLY__
-# define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
-#else /* !__ASSEMBLY__ */
-
-
-#include <linux/threads.h>
-
-#ifdef CONFIG_SMP
-
-#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
-# define PER_CPU_ATTRIBUTES	__attribute__((__model__ (__small__)))
-#endif
-
-#define __my_cpu_offset	__ia64_per_cpu_var(local_per_cpu_offset)
-
-extern void *per_cpu_init(void);
-
-#else /* ! SMP */
-
-#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data.percpu")))
-
-#define per_cpu_init()				(__phys_per_cpu_start)
-
-#endif	/* SMP */
-
-/*
- * Be extremely careful when taking the address of this variable!  Due to virtual
- * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
- * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
- * more efficient.
- */
-#define __ia64_per_cpu_var(var)	per_cpu__##var
-
-#include <asm-generic/percpu.h>
-
-/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
-DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_PERCPU_H */
diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h
deleted file mode 100644
index 7f3333dd00e4..000000000000
--- a/include/asm-ia64/perfmon.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Copyright (C) 2001-2003 Hewlett-Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- */
-
-#ifndef _ASM_IA64_PERFMON_H
-#define _ASM_IA64_PERFMON_H
-
-/*
- * perfmon comamnds supported on all CPU models
- */
-#define PFM_WRITE_PMCS		0x01
-#define PFM_WRITE_PMDS		0x02
-#define PFM_READ_PMDS		0x03
-#define PFM_STOP		0x04
-#define PFM_START		0x05
-#define PFM_ENABLE		0x06 /* obsolete */
-#define PFM_DISABLE		0x07 /* obsolete */
-#define PFM_CREATE_CONTEXT	0x08
-#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
-#define PFM_RESTART		0x0a
-#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
-#define PFM_GET_FEATURES	0x0c
-#define PFM_DEBUG		0x0d
-#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
-#define PFM_GET_PMC_RESET_VAL	0x0f
-#define PFM_LOAD_CONTEXT	0x10
-#define PFM_UNLOAD_CONTEXT	0x11
-
-/*
- * PMU model specific commands (may not be supported on all PMU models)
- */
-#define PFM_WRITE_IBRS		0x20
-#define PFM_WRITE_DBRS		0x21
-
-/*
- * context flags
- */
-#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
-#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
-#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
-
-/*
- * event set flags
- */
-#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
-
-/*
- * PMC flags
- */
-#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
-#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
-
-/*
- * PMD/PMC/IBR/DBR return flags (ignored on input)
- *
- * Those flags are used on output and must be checked in case EAGAIN is returned
- * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
- */
-#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
-#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
-#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
-
-#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
-
-typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
-
-/*
- * Request structure used to define a context
- */
-typedef struct {
-	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
-	unsigned long  ctx_flags;	 /* noblock/block */
-	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
-	unsigned short ctx_reserved1;	 /* for future use */
-	int	       ctx_fd;		 /* return arg: unique identification for context */
-	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
-	unsigned long  ctx_reserved2[11];/* for future use */
-} pfarg_context_t;
-
-/*
- * Request structure used to write/read a PMC or PMD
- */
-typedef struct {
-	unsigned int	reg_num;	   /* which register */
-	unsigned short	reg_set;	   /* event set for this register */
-	unsigned short	reg_reserved1;	   /* for future use */
-
-	unsigned long	reg_value;	   /* initial pmc/pmd value */
-	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
-
-	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
-	unsigned long	reg_short_reset;   /* reset after counter overflow */
-
-	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
-	unsigned long	reg_random_seed;   /* seed value when randomization is used */
-	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
-	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
-
-	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
-	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
-
-	unsigned long   reg_reserved2[3];   /* for future use */
-} pfarg_reg_t;
-
-typedef struct {
-	unsigned int	dbreg_num;		/* which debug register */
-	unsigned short	dbreg_set;		/* event set for this register */
-	unsigned short	dbreg_reserved1;	/* for future use */
-	unsigned long	dbreg_value;		/* value for debug register */
-	unsigned long	dbreg_flags;		/* return: dbreg error */
-	unsigned long	dbreg_reserved2[1];	/* for future use */
-} pfarg_dbreg_t;
-
-typedef struct {
-	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
-	unsigned int	ft_reserved;	/* reserved for future use */
-	unsigned long	reserved[4];	/* for future use */
-} pfarg_features_t;
-
-typedef struct {
-	pid_t		load_pid;	   /* process to load the context into */
-	unsigned short	load_set;	   /* first event set to load */
-	unsigned short	load_reserved1;	   /* for future use */
-	unsigned long	load_reserved2[3]; /* for future use */
-} pfarg_load_t;
-
-typedef struct {
-	int		msg_type;		/* generic message header */
-	int		msg_ctx_fd;		/* generic message header */
-	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
-	unsigned short  msg_active_set;		/* active set at the time of overflow */
-	unsigned short  msg_reserved1;		/* for future use */
-	unsigned int    msg_reserved2;		/* for future use */
-	unsigned long	msg_tstamp;		/* for perf tuning/debug */
-} pfm_ovfl_msg_t;
-
-typedef struct {
-	int		msg_type;		/* generic message header */
-	int		msg_ctx_fd;		/* generic message header */
-	unsigned long	msg_tstamp;		/* for perf tuning */
-} pfm_end_msg_t;
-
-typedef struct {
-	int		msg_type;		/* type of the message */
-	int		msg_ctx_fd;		/* unique identifier for the context */
-	unsigned long	msg_tstamp;		/* for perf tuning */
-} pfm_gen_msg_t;
-
-#define PFM_MSG_OVFL	1	/* an overflow happened */
-#define PFM_MSG_END	2	/* task to which context was attached ended */
-
-typedef union {
-	pfm_ovfl_msg_t	pfm_ovfl_msg;
-	pfm_end_msg_t	pfm_end_msg;
-	pfm_gen_msg_t	pfm_gen_msg;
-} pfm_msg_t;
-
-/*
- * Define the version numbers for both perfmon as a whole and the sampling buffer format.
- */
-#define PFM_VERSION_MAJ		 2U
-#define PFM_VERSION_MIN		 0U
-#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
-#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
-#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
-
-
-/*
- * miscellaneous architected definitions
- */
-#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
-#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
-#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
-
-#ifdef __KERNEL__
-
-extern long perfmonctl(int fd, int cmd, void *arg, int narg);
-
-typedef struct {
-	void (*handler)(int irq, void *arg, struct pt_regs *regs);
-} pfm_intr_handler_desc_t;
-
-extern void pfm_save_regs (struct task_struct *);
-extern void pfm_load_regs (struct task_struct *);
-
-extern void pfm_exit_thread(struct task_struct *);
-extern int  pfm_use_debug_registers(struct task_struct *);
-extern int  pfm_release_debug_registers(struct task_struct *);
-extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin);
-extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
-extern void pfm_init_percpu(void);
-extern void pfm_handle_work(void);
-extern int  pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
-extern int  pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
-
-
-
-/*
- * Reset PMD register flags
- */
-#define PFM_PMD_SHORT_RESET	0
-#define PFM_PMD_LONG_RESET	1
-
-typedef union {
-	unsigned int val;
-	struct {
-		unsigned int notify_user:1;	/* notify user program of overflow */
-		unsigned int reset_ovfl_pmds:1;	/* reset overflowed PMDs */
-		unsigned int block_task:1;	/* block monitored task on kernel exit */
-		unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */
-		unsigned int reserved:28;	/* for future use */
-	} bits;
-} pfm_ovfl_ctrl_t;
-
-typedef struct {
-	unsigned char	ovfl_pmd;			/* index of overflowed PMD  */
-	unsigned char   ovfl_notify;			/* =1 if monitor requested overflow notification */
-	unsigned short  active_set;			/* event set active at the time of the overflow */
-	pfm_ovfl_ctrl_t ovfl_ctrl;			/* return: perfmon controls to set by handler */
-
-	unsigned long   pmd_last_reset;			/* last reset value of of the PMD */
-	unsigned long	smpl_pmds[4];			/* bitmask of other PMD of interest on overflow */
-	unsigned long   smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */
-	unsigned long   pmd_value;			/* current 64-bit value of the PMD */
-	unsigned long	pmd_eventid;			/* eventid associated with PMD */
-} pfm_ovfl_arg_t;
-
-
-typedef struct {
-	char		*fmt_name;
-	pfm_uuid_t	fmt_uuid;
-	size_t		fmt_arg_size;
-	unsigned long	fmt_flags;
-
-	int		(*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg);
-	int		(*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size);
-	int 		(*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg);
-	int		(*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp);
-	int		(*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
-	int		(*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
-	int		(*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
-
-	struct list_head fmt_list;
-} pfm_buffer_fmt_t;
-
-extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);
-extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid);
-
-/*
- * perfmon interface exported to modules
- */
-extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
-extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
-extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
-extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
-
-/*
- * describe the content of the local_cpu_date->pfm_syst_info field
- */
-#define PFM_CPUINFO_SYST_WIDE	0x1	/* if set a system wide session exists */
-#define PFM_CPUINFO_DCR_PP	0x2	/* if set the system wide session has started */
-#define PFM_CPUINFO_EXCL_IDLE	0x4	/* the system wide session excludes the idle task */
-
-/*
- * sysctl control structure. visible to sampling formats
- */
-typedef struct {
-	int	debug;		/* turn on/off debugging via syslog */
-	int	debug_ovfl;	/* turn on/off debug printk in overflow handler */
-	int	fastctxsw;	/* turn on/off fast (unsecure) ctxsw */
-	int	expert_mode;	/* turn on/off value checking */
-} pfm_sysctl_t;
-extern pfm_sysctl_t pfm_sysctl;
-
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IA64_PERFMON_H */
diff --git a/include/asm-ia64/perfmon_default_smpl.h b/include/asm-ia64/perfmon_default_smpl.h
deleted file mode 100644
index 48822c0811d8..000000000000
--- a/include/asm-ia64/perfmon_default_smpl.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *               Stephane Eranian <eranian@hpl.hp.com>
- *
- * This file implements the default sampling buffer format
- * for Linux/ia64 perfmon subsystem.
- */
-#ifndef __PERFMON_DEFAULT_SMPL_H__
-#define __PERFMON_DEFAULT_SMPL_H__ 1
-
-#define PFM_DEFAULT_SMPL_UUID { \
-		0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97}
-
-/*
- * format specific parameters (passed at context creation)
- */
-typedef struct {
-	unsigned long buf_size;		/* size of the buffer in bytes */
-	unsigned int  flags;		/* buffer specific flags */
-	unsigned int  res1;		/* for future use */
-	unsigned long reserved[2];	/* for future use */
-} pfm_default_smpl_arg_t;
-
-/*
- * combined context+format specific structure. Can be passed
- * to PFM_CONTEXT_CREATE
- */
-typedef struct {
-	pfarg_context_t		ctx_arg;
-	pfm_default_smpl_arg_t	buf_arg;
-} pfm_default_smpl_ctx_arg_t;
-
-/*
- * This header is at the beginning of the sampling buffer returned to the user.
- * It is directly followed by the first record.
- */
-typedef struct {
-	unsigned long	hdr_count;		/* how many valid entries */
-	unsigned long	hdr_cur_offs;		/* current offset from top of buffer */
-	unsigned long	hdr_reserved2;		/* reserved for future use */
-
-	unsigned long	hdr_overflows;		/* how many times the buffer overflowed */
-	unsigned long   hdr_buf_size;		/* how many bytes in the buffer */
-
-	unsigned int	hdr_version;		/* contains perfmon version (smpl format diffs) */
-	unsigned int	hdr_reserved1;		/* for future use */
-	unsigned long	hdr_reserved[10];	/* for future use */
-} pfm_default_smpl_hdr_t;
-
-/*
- * Entry header in the sampling buffer.  The header is directly followed
- * with the values of the PMD registers of interest saved in increasing 
- * index order: PMD4, PMD5, and so on. How many PMDs are present depends 
- * on how the session was programmed.
- *
- * In the case where multiple counters overflow at the same time, multiple
- * entries are written consecutively.
- *
- * last_reset_value member indicates the initial value of the overflowed PMD. 
- */
-typedef struct {
-        int             pid;                    /* thread id (for NPTL, this is gettid()) */
-        unsigned char   reserved1[3];           /* reserved for future use */
-        unsigned char   ovfl_pmd;               /* index of overflowed PMD */
-
-        unsigned long   last_reset_val;         /* initial value of overflowed PMD */
-        unsigned long   ip;                     /* where did the overflow interrupt happened  */
-        unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
-
-        unsigned short  cpu;                    /* cpu on which the overfow occured */
-        unsigned short  set;                    /* event set active when overflow ocurred   */
-        int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
-} pfm_default_smpl_entry_t;
-
-#define PFM_DEFAULT_MAX_PMDS		64 /* how many pmds supported by data structures (sizeof(unsigned long) */
-#define PFM_DEFAULT_MAX_ENTRY_SIZE	(sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS))
-#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE	(sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE)
-
-#define PFM_DEFAULT_SMPL_VERSION_MAJ	2U
-#define PFM_DEFAULT_SMPL_VERSION_MIN	0U
-#define PFM_DEFAULT_SMPL_VERSION	(((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff))
-
-#endif /* __PERFMON_DEFAULT_SMPL_H__ */
diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h
deleted file mode 100644
index b9ac1a6fc216..000000000000
--- a/include/asm-ia64/pgalloc.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef _ASM_IA64_PGALLOC_H
-#define _ASM_IA64_PGALLOC_H
-
-/*
- * This file contains the functions and defines necessary to allocate
- * page tables.
- *
- * This hopefully works with any (fixed) ia-64 page-size, as defined
- * in <asm/page.h> (currently 8192).
- *
- * Copyright (C) 1998-2001 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 2000, Goutham Rao <goutham.rao@intel.com>
- */
-
-
-#include <linux/compiler.h>
-#include <linux/mm.h>
-#include <linux/page-flags.h>
-#include <linux/threads.h>
-#include <linux/quicklist.h>
-
-#include <asm/mmu_context.h>
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	return quicklist_alloc(0, GFP_KERNEL, NULL);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	quicklist_free(0, NULL, pgd);
-}
-
-#ifdef CONFIG_PGTABLE_4
-static inline void
-pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud)
-{
-	pgd_val(*pgd_entry) = __pa(pud);
-}
-
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return quicklist_alloc(0, GFP_KERNEL, NULL);
-}
-
-static inline void pud_free(struct mm_struct *mm, pud_t *pud)
-{
-	quicklist_free(0, NULL, pud);
-}
-#define __pud_free_tlb(tlb, pud)	pud_free((tlb)->mm, pud)
-#endif /* CONFIG_PGTABLE_4 */
-
-static inline void
-pud_populate(struct mm_struct *mm, pud_t * pud_entry, pmd_t * pmd)
-{
-	pud_val(*pud_entry) = __pa(pmd);
-}
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return quicklist_alloc(0, GFP_KERNEL, NULL);
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	quicklist_free(0, NULL, pmd);
-}
-
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
-{
-	pmd_val(*pmd_entry) = page_to_phys(pte);
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmd_entry, pte_t * pte)
-{
-	pmd_val(*pmd_entry) = __pa(pte);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	struct page *page;
-	void *pg;
-
-	pg = quicklist_alloc(0, GFP_KERNEL, NULL);
-	if (!pg)
-		return NULL;
-	page = virt_to_page(pg);
-	pgtable_page_ctor(page);
-	return page;
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-					  unsigned long addr)
-{
-	return quicklist_alloc(0, GFP_KERNEL, NULL);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	quicklist_free_page(0, NULL, pte);
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	quicklist_free(0, NULL, pte);
-}
-
-static inline void check_pgt_cache(void)
-{
-	quicklist_trim(0, NULL, 25, 16);
-}
-
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
-
-#endif				/* _ASM_IA64_PGALLOC_H */
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
deleted file mode 100644
index 7a9bff47564f..000000000000
--- a/include/asm-ia64/pgtable.h
+++ /dev/null
@@ -1,615 +0,0 @@
-#ifndef _ASM_IA64_PGTABLE_H
-#define _ASM_IA64_PGTABLE_H
-
-/*
- * This file contains the functions and defines necessary to modify and use
- * the IA-64 page table tree.
- *
- * This hopefully works with any (fixed) IA-64 page-size, as defined
- * in <asm/page.h>.
- *
- * Copyright (C) 1998-2005 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-
-#include <asm/mman.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/types.h>
-
-#define IA64_MAX_PHYS_BITS	50	/* max. number of physical address bits (architected) */
-
-/*
- * First, define the various bits in a PTE.  Note that the PTE format
- * matches the VHPT short format, the firt doubleword of the VHPD long
- * format, and the first doubleword of the TLB insertion format.
- */
-#define _PAGE_P_BIT		0
-#define _PAGE_A_BIT		5
-#define _PAGE_D_BIT		6
-
-#define _PAGE_P			(1 << _PAGE_P_BIT)	/* page present bit */
-#define _PAGE_MA_WB		(0x0 <<  2)	/* write back memory attribute */
-#define _PAGE_MA_UC		(0x4 <<  2)	/* uncacheable memory attribute */
-#define _PAGE_MA_UCE		(0x5 <<  2)	/* UC exported attribute */
-#define _PAGE_MA_WC		(0x6 <<  2)	/* write coalescing memory attribute */
-#define _PAGE_MA_NAT		(0x7 <<  2)	/* not-a-thing attribute */
-#define _PAGE_MA_MASK		(0x7 <<  2)
-#define _PAGE_PL_0		(0 <<  7)	/* privilege level 0 (kernel) */
-#define _PAGE_PL_1		(1 <<  7)	/* privilege level 1 (unused) */
-#define _PAGE_PL_2		(2 <<  7)	/* privilege level 2 (unused) */
-#define _PAGE_PL_3		(3 <<  7)	/* privilege level 3 (user) */
-#define _PAGE_PL_MASK		(3 <<  7)
-#define _PAGE_AR_R		(0 <<  9)	/* read only */
-#define _PAGE_AR_RX		(1 <<  9)	/* read & execute */
-#define _PAGE_AR_RW		(2 <<  9)	/* read & write */
-#define _PAGE_AR_RWX		(3 <<  9)	/* read, write & execute */
-#define _PAGE_AR_R_RW		(4 <<  9)	/* read / read & write */
-#define _PAGE_AR_RX_RWX		(5 <<  9)	/* read & exec / read, write & exec */
-#define _PAGE_AR_RWX_RW		(6 <<  9)	/* read, write & exec / read & write */
-#define _PAGE_AR_X_RX		(7 <<  9)	/* exec & promote / read & exec */
-#define _PAGE_AR_MASK		(7 <<  9)
-#define _PAGE_AR_SHIFT		9
-#define _PAGE_A			(1 << _PAGE_A_BIT)	/* page accessed bit */
-#define _PAGE_D			(1 << _PAGE_D_BIT)	/* page dirty bit */
-#define _PAGE_PPN_MASK		(((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL)
-#define _PAGE_ED		(__IA64_UL(1) << 52)	/* exception deferral */
-#define _PAGE_PROTNONE		(__IA64_UL(1) << 63)
-
-/* Valid only for a PTE with the present bit cleared: */
-#define _PAGE_FILE		(1 << 1)		/* see swap & file pte remarks below */
-
-#define _PFN_MASK		_PAGE_PPN_MASK
-/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */
-#define _PAGE_CHG_MASK	(_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED)
-
-#define _PAGE_SIZE_4K	12
-#define _PAGE_SIZE_8K	13
-#define _PAGE_SIZE_16K	14
-#define _PAGE_SIZE_64K	16
-#define _PAGE_SIZE_256K	18
-#define _PAGE_SIZE_1M	20
-#define _PAGE_SIZE_4M	22
-#define _PAGE_SIZE_16M	24
-#define _PAGE_SIZE_64M	26
-#define _PAGE_SIZE_256M	28
-#define _PAGE_SIZE_1G	30
-#define _PAGE_SIZE_4G	32
-
-#define __ACCESS_BITS		_PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB
-#define __DIRTY_BITS_NO_ED	_PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB
-#define __DIRTY_BITS		_PAGE_ED | __DIRTY_BITS_NO_ED
-
-/*
- * How many pointers will a page table level hold expressed in shift
- */
-#define PTRS_PER_PTD_SHIFT	(PAGE_SHIFT-3)
-
-/*
- * Definitions for fourth level:
- */
-#define PTRS_PER_PTE	(__IA64_UL(1) << (PTRS_PER_PTD_SHIFT))
-
-/*
- * Definitions for third level:
- *
- * PMD_SHIFT determines the size of the area a third-level page table
- * can map.
- */
-#define PMD_SHIFT	(PAGE_SHIFT + (PTRS_PER_PTD_SHIFT))
-#define PMD_SIZE	(1UL << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-#define PTRS_PER_PMD	(1UL << (PTRS_PER_PTD_SHIFT))
-
-#ifdef CONFIG_PGTABLE_4
-/*
- * Definitions for second level:
- *
- * PUD_SHIFT determines the size of the area a second-level page table
- * can map.
- */
-#define PUD_SHIFT	(PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
-#define PUD_SIZE	(1UL << PUD_SHIFT)
-#define PUD_MASK	(~(PUD_SIZE-1))
-#define PTRS_PER_PUD	(1UL << (PTRS_PER_PTD_SHIFT))
-#endif
-
-/*
- * Definitions for first level:
- *
- * PGDIR_SHIFT determines what a first-level page table entry can map.
- */
-#ifdef CONFIG_PGTABLE_4
-#define PGDIR_SHIFT		(PUD_SHIFT + (PTRS_PER_PTD_SHIFT))
-#else
-#define PGDIR_SHIFT		(PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
-#endif
-#define PGDIR_SIZE		(__IA64_UL(1) << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-#define PTRS_PER_PGD_SHIFT	PTRS_PER_PTD_SHIFT
-#define PTRS_PER_PGD		(1UL << PTRS_PER_PGD_SHIFT)
-#define USER_PTRS_PER_PGD	(5*PTRS_PER_PGD/8)	/* regions 0-4 are user regions */
-#define FIRST_USER_ADDRESS	0
-
-/*
- * All the normal masks have the "page accessed" bits on, as any time
- * they are used, the page is accessed. They are cleared only by the
- * page-out routines.
- */
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_A)
-#define PAGE_SHARED	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW)
-#define PAGE_READONLY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
-#define PAGE_COPY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
-#define PAGE_COPY_EXEC	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
-#define PAGE_GATE	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
-#define PAGE_KERNEL	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX)
-#define PAGE_KERNELRX	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
-
-# ifndef __ASSEMBLY__
-
-#include <linux/sched.h>	/* for mm_struct */
-#include <linux/bitops.h>
-#include <asm/cacheflush.h>
-#include <asm/mmu_context.h>
-#include <asm/processor.h>
-
-/*
- * Next come the mappings that determine how mmap() protection bits
- * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented.  The
- * _P version gets used for a private shared memory segment, the _S
- * version gets used for a shared memory segment with MAP_SHARED on.
- * In a private shared memory segment, we do a copy-on-write if a task
- * attempts to write to the page.
- */
-	/* xwr */
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY
-#define __P010	PAGE_READONLY	/* write to priv pg -> copy & make writable */
-#define __P011	PAGE_READONLY	/* ditto */
-#define __P100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
-#define __P101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
-#define __P110	PAGE_COPY_EXEC
-#define __P111	PAGE_COPY_EXEC
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY
-#define __S010	PAGE_SHARED	/* we don't have (and don't need) write-only */
-#define __S011	PAGE_SHARED
-#define __S100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
-#define __S101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
-#define __S110	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
-#define __S111	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
-
-#define pgd_ERROR(e)	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
-#ifdef CONFIG_PGTABLE_4
-#define pud_ERROR(e)	printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))
-#endif
-#define pmd_ERROR(e)	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pte_ERROR(e)	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
-
-
-/*
- * Some definitions to translate between mem_map, PTEs, and page addresses:
- */
-
-
-/* Quick test to see if ADDR is a (potentially) valid physical address. */
-static inline long
-ia64_phys_addr_valid (unsigned long addr)
-{
-	return (addr & (local_cpu_data->unimpl_pa_mask)) == 0;
-}
-
-/*
- * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
- * memory.  For the return value to be meaningful, ADDR must be >=
- * PAGE_OFFSET.  This operation can be relatively expensive (e.g.,
- * require a hash-, or multi-level tree-lookup or something of that
- * sort) but it guarantees to return TRUE only if accessing the page
- * at that address does not cause an error.  Note that there may be
- * addresses for which kern_addr_valid() returns FALSE even though an
- * access would not cause an error (e.g., this is typically true for
- * memory mapped I/O regions.
- *
- * XXX Need to implement this for IA-64.
- */
-#define kern_addr_valid(addr)	(1)
-
-
-/*
- * Now come the defines and routines to manage and access the three-level
- * page table.
- */
-
-
-#define VMALLOC_START		(RGN_BASE(RGN_GATE) + 0x200000000UL)
-#ifdef CONFIG_VIRTUAL_MEM_MAP
-# define VMALLOC_END_INIT	(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9)))
-# define VMALLOC_END		vmalloc_end
-  extern unsigned long vmalloc_end;
-#else
-#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_SPARSEMEM_VMEMMAP)
-/* SPARSEMEM_VMEMMAP uses half of vmalloc... */
-# define VMALLOC_END		(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 10)))
-# define vmemmap		((struct page *)VMALLOC_END)
-#else
-# define VMALLOC_END		(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9)))
-#endif
-#endif
-
-/* fs/proc/kcore.c */
-#define	kc_vaddr_to_offset(v) ((v) - RGN_BASE(RGN_GATE))
-#define	kc_offset_to_vaddr(o) ((o) + RGN_BASE(RGN_GATE))
-
-#define RGN_MAP_SHIFT (PGDIR_SHIFT + PTRS_PER_PGD_SHIFT - 3)
-#define RGN_MAP_LIMIT	((1UL << RGN_MAP_SHIFT) - PAGE_SIZE)	/* per region addr limit */
-
-/*
- * Conversion functions: convert page frame number (pfn) and a protection value to a page
- * table entry (pte).
- */
-#define pfn_pte(pfn, pgprot) \
-({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; })
-
-/* Extract pfn from pte.  */
-#define pte_pfn(_pte)		((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT)
-
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-/* This takes a physical page address that is used by the remapping functions */
-#define mk_pte_phys(physpage, pgprot) \
-({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
-
-#define pte_modify(_pte, newprot) \
-	(__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK)))
-
-#define pte_none(pte) 			(!pte_val(pte))
-#define pte_present(pte)		(pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE))
-#define pte_clear(mm,addr,pte)		(pte_val(*(pte)) = 0UL)
-/* pte_page() returns the "struct page *" corresponding to the PTE: */
-#define pte_page(pte)			virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET))
-
-#define pmd_none(pmd)			(!pmd_val(pmd))
-#define pmd_bad(pmd)			(!ia64_phys_addr_valid(pmd_val(pmd)))
-#define pmd_present(pmd)		(pmd_val(pmd) != 0UL)
-#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0UL)
-#define pmd_page_vaddr(pmd)		((unsigned long) __va(pmd_val(pmd) & _PFN_MASK))
-#define pmd_page(pmd)			virt_to_page((pmd_val(pmd) + PAGE_OFFSET))
-
-#define pud_none(pud)			(!pud_val(pud))
-#define pud_bad(pud)			(!ia64_phys_addr_valid(pud_val(pud)))
-#define pud_present(pud)		(pud_val(pud) != 0UL)
-#define pud_clear(pudp)			(pud_val(*(pudp)) = 0UL)
-#define pud_page_vaddr(pud)		((unsigned long) __va(pud_val(pud) & _PFN_MASK))
-#define pud_page(pud)			virt_to_page((pud_val(pud) + PAGE_OFFSET))
-
-#ifdef CONFIG_PGTABLE_4
-#define pgd_none(pgd)			(!pgd_val(pgd))
-#define pgd_bad(pgd)			(!ia64_phys_addr_valid(pgd_val(pgd)))
-#define pgd_present(pgd)		(pgd_val(pgd) != 0UL)
-#define pgd_clear(pgdp)			(pgd_val(*(pgdp)) = 0UL)
-#define pgd_page_vaddr(pgd)		((unsigned long) __va(pgd_val(pgd) & _PFN_MASK))
-#define pgd_page(pgd)			virt_to_page((pgd_val(pgd) + PAGE_OFFSET))
-#endif
-
-/*
- * The following have defined behavior only work if pte_present() is true.
- */
-#define pte_write(pte)	((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4)
-#define pte_exec(pte)		((pte_val(pte) & _PAGE_AR_RX) != 0)
-#define pte_dirty(pte)		((pte_val(pte) & _PAGE_D) != 0)
-#define pte_young(pte)		((pte_val(pte) & _PAGE_A) != 0)
-#define pte_file(pte)		((pte_val(pte) & _PAGE_FILE) != 0)
-#define pte_special(pte)	0
-
-/*
- * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the
- * access rights:
- */
-#define pte_wrprotect(pte)	(__pte(pte_val(pte) & ~_PAGE_AR_RW))
-#define pte_mkwrite(pte)	(__pte(pte_val(pte) | _PAGE_AR_RW))
-#define pte_mkold(pte)		(__pte(pte_val(pte) & ~_PAGE_A))
-#define pte_mkyoung(pte)	(__pte(pte_val(pte) | _PAGE_A))
-#define pte_mkclean(pte)	(__pte(pte_val(pte) & ~_PAGE_D))
-#define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_D))
-#define pte_mkhuge(pte)		(__pte(pte_val(pte)))
-#define pte_mkspecial(pte)	(pte)
-
-/*
- * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to
- * sync icache and dcache when we insert *new* executable page.
- *  __ia64_sync_icache_dcache() check Pg_arch_1 bit and flush icache
- * if necessary.
- *
- *  set_pte() is also called by the kernel, but we can expect that the kernel
- *  flushes icache explicitly if necessary.
- */
-#define pte_present_exec_user(pte)\
-	((pte_val(pte) & (_PAGE_P | _PAGE_PL_MASK | _PAGE_AR_RX)) == \
-		(_PAGE_P | _PAGE_PL_3 | _PAGE_AR_RX))
-
-extern void __ia64_sync_icache_dcache(pte_t pteval);
-static inline void set_pte(pte_t *ptep, pte_t pteval)
-{
-	/* page is present && page is user  && page is executable
-	 * && (page swapin or new page or page migraton
-	 *	|| copy_on_write with page copying.)
-	 */
-	if (pte_present_exec_user(pteval) &&
-	    (!pte_present(*ptep) ||
-		pte_pfn(*ptep) != pte_pfn(pteval)))
-		/* load_module() calles flush_icache_range() explicitly*/
-		__ia64_sync_icache_dcache(pteval);
-	*ptep = pteval;
-}
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * Make page protection values cacheable, uncacheable, or write-
- * combining.  Note that "protection" is really a misnomer here as the
- * protection value contains the memory attribute bits, dirty bits, and
- * various other bits as well.
- */
-#define pgprot_cacheable(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WB)
-#define pgprot_noncached(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC)
-#define pgprot_writecombine(prot)	__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC)
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-				     unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-static inline unsigned long
-pgd_index (unsigned long address)
-{
-	unsigned long region = address >> 61;
-	unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1);
-
-	return (region << (PAGE_SHIFT - 6)) | l1index;
-}
-
-/* The offset in the 1-level directory is given by the 3 region bits
-   (61..63) and the level-1 bits.  */
-static inline pgd_t*
-pgd_offset (const struct mm_struct *mm, unsigned long address)
-{
-	return mm->pgd + pgd_index(address);
-}
-
-/* In the kernel's mapped region we completely ignore the region number
-   (since we know it's in region number 5). */
-#define pgd_offset_k(addr) \
-	(init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)))
-
-/* Look up a pgd entry in the gate area.  On IA-64, the gate-area
-   resides in the kernel-mapped segment, hence we use pgd_offset_k()
-   here.  */
-#define pgd_offset_gate(mm, addr)	pgd_offset_k(addr)
-
-#ifdef CONFIG_PGTABLE_4
-/* Find an entry in the second-level page table.. */
-#define pud_offset(dir,addr) \
-	((pud_t *) pgd_page_vaddr(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
-#endif
-
-/* Find an entry in the third-level page table.. */
-#define pmd_offset(dir,addr) \
-	((pmd_t *) pud_page_vaddr(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
-
-/*
- * Find an entry in the third-level page table.  This looks more complicated than it
- * should be because some platforms place page tables in high memory.
- */
-#define pte_index(addr)	 	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir,addr)	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
-#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
-#define pte_offset_map_nested(dir,addr)	pte_offset_map(dir, addr)
-#define pte_unmap(pte)			do { } while (0)
-#define pte_unmap_nested(pte)		do { } while (0)
-
-/* atomic versions of the some PTE manipulations: */
-
-static inline int
-ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
-{
-#ifdef CONFIG_SMP
-	if (!pte_young(*ptep))
-		return 0;
-	return test_and_clear_bit(_PAGE_A_BIT, ptep);
-#else
-	pte_t pte = *ptep;
-	if (!pte_young(pte))
-		return 0;
-	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
-	return 1;
-#endif
-}
-
-static inline pte_t
-ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-#ifdef CONFIG_SMP
-	return __pte(xchg((long *) ptep, 0));
-#else
-	pte_t pte = *ptep;
-	pte_clear(mm, addr, ptep);
-	return pte;
-#endif
-}
-
-static inline void
-ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-#ifdef CONFIG_SMP
-	unsigned long new, old;
-
-	do {
-		old = pte_val(*ptep);
-		new = pte_val(pte_wrprotect(__pte (old)));
-	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
-#else
-	pte_t old_pte = *ptep;
-	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
-#endif
-}
-
-static inline int
-pte_same (pte_t a, pte_t b)
-{
-	return pte_val(a) == pte_val(b);
-}
-
-#define update_mmu_cache(vma, address, pte) do { } while (0)
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void paging_init (void);
-
-/*
- * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of
- *	 bits in the swap-type field of the swap pte.  It would be nice to
- *	 enforce that, but we can't easily include <linux/swap.h> here.
- *	 (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...).
- *
- * Format of swap pte:
- *	bit   0   : present bit (must be zero)
- *	bit   1   : _PAGE_FILE (must be zero)
- *	bits  2- 8: swap-type
- *	bits  9-62: swap offset
- *	bit  63   : _PAGE_PROTNONE bit
- *
- * Format of file pte:
- *	bit   0   : present bit (must be zero)
- *	bit   1   : _PAGE_FILE (must be one)
- *	bits  2-62: file_offset/PAGE_SIZE
- *	bit  63   : _PAGE_PROTNONE bit
- */
-#define __swp_type(entry)		(((entry).val >> 2) & 0x7f)
-#define __swp_offset(entry)		(((entry).val << 1) >> 10)
-#define __swp_entry(type,offset)	((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) })
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
-
-#define PTE_FILE_MAX_BITS		61
-#define pte_to_pgoff(pte)		((pte_val(pte) << 1) >> 3)
-#define pgoff_to_pte(off)		((pte_t) { ((off) << 2) | _PAGE_FILE })
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
-extern struct page *zero_page_memmap_ptr;
-#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr)
-
-/* We provide our own get_unmapped_area to cope with VA holes for userland */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HUGETLB_PGDIR_SHIFT	(HPAGE_SHIFT + 2*(PAGE_SHIFT-3))
-#define HUGETLB_PGDIR_SIZE	(__IA64_UL(1) << HUGETLB_PGDIR_SHIFT)
-#define HUGETLB_PGDIR_MASK	(~(HUGETLB_PGDIR_SIZE-1))
-#endif
-
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-/*
- * Update PTEP with ENTRY, which is guaranteed to be a less
- * restrictive PTE.  That is, ENTRY may have the ACCESSED, DIRTY, and
- * WRITABLE bits turned on, when the value at PTEP did not.  The
- * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE.
- *
- * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without
- * having to worry about races.  On SMP machines, there are only two
- * cases where this is true:
- *
- *	(1) *PTEP has the PRESENT bit turned OFF
- *	(2) ENTRY has the DIRTY bit turned ON
- *
- * On ia64, we could implement this routine with a cmpxchg()-loop
- * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY.
- * However, like on x86, we can get a more streamlined version by
- * observing that it is OK to drop ACCESSED bit updates when
- * SAFELY_WRITABLE is FALSE.  Besides being rare, all that would do is
- * result in an extra Access-bit fault, which would then turn on the
- * ACCESSED bit in the low-level fault handler (iaccess_bit or
- * daccess_bit in ivt.S).
- */
-#ifdef CONFIG_SMP
-# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
-({									\
-	int __changed = !pte_same(*(__ptep), __entry);			\
-	if (__changed && __safely_writable) {				\
-		set_pte(__ptep, __entry);				\
-		flush_tlb_page(__vma, __addr);				\
-	}								\
-	__changed;							\
-})
-#else
-# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
-({									\
-	int __changed = !pte_same(*(__ptep), __entry);			\
-	if (__changed) {						\
-		set_pte_at((__vma)->vm_mm, (__addr), __ptep, __entry);	\
-		flush_tlb_page(__vma, __addr);				\
-	}								\
-	__changed;							\
-})
-#endif
-
-#  ifdef CONFIG_VIRTUAL_MEM_MAP
-  /* arch mem_map init routine is needed due to holes in a virtual mem_map */
-#   define __HAVE_ARCH_MEMMAP_INIT
-    extern void memmap_init (unsigned long size, int nid, unsigned long zone,
-			     unsigned long start_pfn);
-#  endif /* CONFIG_VIRTUAL_MEM_MAP */
-# endif /* !__ASSEMBLY__ */
-
-/*
- * Identity-mapped regions use a large page size.  We'll call such large pages
- * "granules".  If you can think of a better name that's unambiguous, let me
- * know...
- */
-#if defined(CONFIG_IA64_GRANULE_64MB)
-# define IA64_GRANULE_SHIFT	_PAGE_SIZE_64M
-#elif defined(CONFIG_IA64_GRANULE_16MB)
-# define IA64_GRANULE_SHIFT	_PAGE_SIZE_16M
-#endif
-#define IA64_GRANULE_SIZE	(1 << IA64_GRANULE_SHIFT)
-/*
- * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL):
- */
-#define KERNEL_TR_PAGE_SHIFT	_PAGE_SIZE_64M
-#define KERNEL_TR_PAGE_SIZE	(1 << KERNEL_TR_PAGE_SHIFT)
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-/* These tell get_user_pages() that the first gate page is accessible from user-level.  */
-#define FIXADDR_USER_START	GATE_ADDR
-#ifdef HAVE_BUGGY_SEGREL
-# define FIXADDR_USER_END	(GATE_ADDR + 2*PAGE_SIZE)
-#else
-# define FIXADDR_USER_END	(GATE_ADDR + 2*PERCPU_PAGE_SIZE)
-#endif
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-#define __HAVE_ARCH_PTE_SAME
-#define __HAVE_ARCH_PGD_OFFSET_GATE
-
-
-#ifndef CONFIG_PGTABLE_4
-#include <asm-generic/pgtable-nopud.h>
-#endif
-#include <asm-generic/pgtable.h>
-
-#endif /* _ASM_IA64_PGTABLE_H */
diff --git a/include/asm-ia64/poll.h b/include/asm-ia64/poll.h
deleted file mode 100644
index c98509d3149e..000000000000
--- a/include/asm-ia64/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-ia64/posix_types.h b/include/asm-ia64/posix_types.h
deleted file mode 100644
index 17885567b731..000000000000
--- a/include/asm-ia64/posix_types.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _ASM_IA64_POSIX_TYPES_H
-#define _ASM_IA64_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- *
- * Based on <asm-alpha/posix_types.h>.
- *
- * Modified 1998-2000, 2003
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned int	__kernel_mode_t;
-typedef unsigned int	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef long long	__kernel_loff_t;
-typedef int		__kernel_pid_t;
-typedef int		__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef long		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-typedef __kernel_uid_t __kernel_old_uid_t;
-typedef __kernel_gid_t __kernel_old_gid_t;
-typedef __kernel_uid_t __kernel_uid32_t;
-typedef __kernel_gid_t __kernel_gid32_t;
-
-typedef unsigned int	__kernel_old_dev_t;
-
-# ifdef __KERNEL__
-
-#  ifndef __GNUC__
-
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
-#define	__FD_ZERO(set)	\
-  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
-
-#  else /* !__GNUC__ */
-
-/* With GNU C, use inline functions instead so args are evaluated only once: */
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
-{ 
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *p)
-{
-	unsigned long *tmp = p->fds_bits;
-	int i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		      case 16:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			return;
-
-		      case 8:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			return;
-
-		      case 4:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			return;
-		}
-	}
-	i = __FDSET_LONGS;
-	while (i) {
-		i--;
-		*tmp = 0;
-		tmp++;
-	}
-}
-
-#  endif /* !__GNUC__ */
-# endif /* __KERNEL__ */
-#endif /* _ASM_IA64_POSIX_TYPES_H */
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
deleted file mode 100644
index f88fa054d01d..000000000000
--- a/include/asm-ia64/processor.h
+++ /dev/null
@@ -1,771 +0,0 @@
-#ifndef _ASM_IA64_PROCESSOR_H
-#define _ASM_IA64_PROCESSOR_H
-
-/*
- * Copyright (C) 1998-2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
- *
- * 11/24/98	S.Eranian	added ia64_set_iva()
- * 12/03/99	D. Mosberger	implement thread_saved_pc() via kernel unwind API
- * 06/16/00	A. Mallick	added csd/ssd/tssd for ia32 support
- */
-
-
-#include <asm/intrinsics.h>
-#include <asm/kregs.h>
-#include <asm/ptrace.h>
-#include <asm/ustack.h>
-
-#define IA64_NUM_PHYS_STACK_REG	96
-#define IA64_NUM_DBG_REGS	8
-
-#define DEFAULT_MAP_BASE	__IA64_UL_CONST(0x2000000000000000)
-#define DEFAULT_TASK_SIZE	__IA64_UL_CONST(0xa000000000000000)
-
-/*
- * TASK_SIZE really is a mis-named.  It really is the maximum user
- * space address (plus one).  On IA-64, there are five regions of 2TB
- * each (assuming 8KB page size), for a total of 8TB of user virtual
- * address space.
- */
-#define TASK_SIZE_OF(tsk)	((tsk)->thread.task_size)
-#define TASK_SIZE       	TASK_SIZE_OF(current)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(current->thread.map_base)
-
-#define IA64_THREAD_FPH_VALID	(__IA64_UL(1) << 0)	/* floating-point high state valid? */
-#define IA64_THREAD_DBG_VALID	(__IA64_UL(1) << 1)	/* debug registers valid? */
-#define IA64_THREAD_PM_VALID	(__IA64_UL(1) << 2)	/* performance registers valid? */
-#define IA64_THREAD_UAC_NOPRINT	(__IA64_UL(1) << 3)	/* don't log unaligned accesses */
-#define IA64_THREAD_UAC_SIGBUS	(__IA64_UL(1) << 4)	/* generate SIGBUS on unaligned acc. */
-#define IA64_THREAD_MIGRATION	(__IA64_UL(1) << 5)	/* require migration
-							   sync at ctx sw */
-#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6)	/* don't log any fpswa faults */
-#define IA64_THREAD_FPEMU_SIGFPE  (__IA64_UL(1) << 7)	/* send a SIGFPE for fpswa faults */
-
-#define IA64_THREAD_UAC_SHIFT	3
-#define IA64_THREAD_UAC_MASK	(IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS)
-#define IA64_THREAD_FPEMU_SHIFT	6
-#define IA64_THREAD_FPEMU_MASK	(IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE)
-
-
-/*
- * This shift should be large enough to be able to represent 1000000000/itc_freq with good
- * accuracy while being small enough to fit 10*1000000000<<IA64_NSEC_PER_CYC_SHIFT in 64 bits
- * (this will give enough slack to represent 10 seconds worth of time as a scaled number).
- */
-#define IA64_NSEC_PER_CYC_SHIFT	30
-
-#ifndef __ASSEMBLY__
-
-#include <linux/cache.h>
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <linux/types.h>
-
-#include <asm/fpu.h>
-#include <asm/page.h>
-#include <asm/percpu.h>
-#include <asm/rse.h>
-#include <asm/unwind.h>
-#include <asm/atomic.h>
-#ifdef CONFIG_NUMA
-#include <asm/nodedata.h>
-#endif
-
-/* like above but expressed as bitfields for more efficient access: */
-struct ia64_psr {
-	__u64 reserved0 : 1;
-	__u64 be : 1;
-	__u64 up : 1;
-	__u64 ac : 1;
-	__u64 mfl : 1;
-	__u64 mfh : 1;
-	__u64 reserved1 : 7;
-	__u64 ic : 1;
-	__u64 i : 1;
-	__u64 pk : 1;
-	__u64 reserved2 : 1;
-	__u64 dt : 1;
-	__u64 dfl : 1;
-	__u64 dfh : 1;
-	__u64 sp : 1;
-	__u64 pp : 1;
-	__u64 di : 1;
-	__u64 si : 1;
-	__u64 db : 1;
-	__u64 lp : 1;
-	__u64 tb : 1;
-	__u64 rt : 1;
-	__u64 reserved3 : 4;
-	__u64 cpl : 2;
-	__u64 is : 1;
-	__u64 mc : 1;
-	__u64 it : 1;
-	__u64 id : 1;
-	__u64 da : 1;
-	__u64 dd : 1;
-	__u64 ss : 1;
-	__u64 ri : 2;
-	__u64 ed : 1;
-	__u64 bn : 1;
-	__u64 reserved4 : 19;
-};
-
-union ia64_isr {
-	__u64  val;
-	struct {
-		__u64 code : 16;
-		__u64 vector : 8;
-		__u64 reserved1 : 8;
-		__u64 x : 1;
-		__u64 w : 1;
-		__u64 r : 1;
-		__u64 na : 1;
-		__u64 sp : 1;
-		__u64 rs : 1;
-		__u64 ir : 1;
-		__u64 ni : 1;
-		__u64 so : 1;
-		__u64 ei : 2;
-		__u64 ed : 1;
-		__u64 reserved2 : 20;
-	};
-};
-
-union ia64_lid {
-	__u64 val;
-	struct {
-		__u64  rv  : 16;
-		__u64  eid : 8;
-		__u64  id  : 8;
-		__u64  ig  : 32;
-	};
-};
-
-union ia64_tpr {
-	__u64 val;
-	struct {
-		__u64 ig0 : 4;
-		__u64 mic : 4;
-		__u64 rsv : 8;
-		__u64 mmi : 1;
-		__u64 ig1 : 47;
-	};
-};
-
-union ia64_itir {
-	__u64 val;
-	struct {
-		__u64 rv3  :  2; /* 0-1 */
-		__u64 ps   :  6; /* 2-7 */
-		__u64 key  : 24; /* 8-31 */
-		__u64 rv4  : 32; /* 32-63 */
-	};
-};
-
-union  ia64_rr {
-	__u64 val;
-	struct {
-		__u64  ve	:  1;  /* enable hw walker */
-		__u64  reserved0:  1;  /* reserved */
-		__u64  ps	:  6;  /* log page size */
-		__u64  rid	: 24;  /* region id */
-		__u64  reserved1: 32;  /* reserved */
-	};
-};
-
-/*
- * CPU type, hardware bug flags, and per-CPU state.  Frequently used
- * state comes earlier:
- */
-struct cpuinfo_ia64 {
-	__u32 softirq_pending;
-	__u64 itm_delta;	/* # of clock cycles between clock ticks */
-	__u64 itm_next;		/* interval timer mask value to use for next clock tick */
-	__u64 nsec_per_cyc;	/* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
-	__u64 unimpl_va_mask;	/* mask of unimplemented virtual address bits (from PAL) */
-	__u64 unimpl_pa_mask;	/* mask of unimplemented physical address bits (from PAL) */
-	__u64 itc_freq;		/* frequency of ITC counter */
-	__u64 proc_freq;	/* frequency of processor */
-	__u64 cyc_per_usec;	/* itc_freq/1000000 */
-	__u64 ptce_base;
-	__u32 ptce_count[2];
-	__u32 ptce_stride[2];
-	struct task_struct *ksoftirqd;	/* kernel softirq daemon for this CPU */
-
-#ifdef CONFIG_SMP
-	__u64 loops_per_jiffy;
-	int cpu;
-	__u32 socket_id;	/* physical processor socket id */
-	__u16 core_id;		/* core id */
-	__u16 thread_id;	/* thread id */
-	__u16 num_log;		/* Total number of logical processors on
-				 * this socket that were successfully booted */
-	__u8  cores_per_socket;	/* Cores per processor socket */
-	__u8  threads_per_core;	/* Threads per core */
-#endif
-
-	/* CPUID-derived information: */
-	__u64 ppn;
-	__u64 features;
-	__u8 number;
-	__u8 revision;
-	__u8 model;
-	__u8 family;
-	__u8 archrev;
-	char vendor[16];
-	char *model_name;
-
-#ifdef CONFIG_NUMA
-	struct ia64_node_data *node_data;
-#endif
-};
-
-DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info);
-
-/*
- * The "local" data variable.  It refers to the per-CPU data of the currently executing
- * CPU, much like "current" points to the per-task data of the currently executing task.
- * Do not use the address of local_cpu_data, since it will be different from
- * cpu_data(smp_processor_id())!
- */
-#define local_cpu_data		(&__ia64_per_cpu_var(cpu_info))
-#define cpu_data(cpu)		(&per_cpu(cpu_info, cpu))
-
-extern void print_cpu_info (struct cpuinfo_ia64 *);
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define SET_UNALIGN_CTL(task,value)								\
-({												\
-	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK)			\
-				| (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK));	\
-	0;											\
-})
-#define GET_UNALIGN_CTL(task,addr)								\
-({												\
-	put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT,	\
-		 (int __user *) (addr));							\
-})
-
-#define SET_FPEMU_CTL(task,value)								\
-({												\
-	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK)		\
-			  | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK));	\
-	0;											\
-})
-#define GET_FPEMU_CTL(task,addr)								\
-({												\
-	put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT,	\
-		 (int __user *) (addr));							\
-})
-
-#ifdef CONFIG_IA32_SUPPORT
-struct desc_struct {
-	unsigned int a, b;
-};
-
-#define desc_empty(desc)		(!((desc)->a | (desc)->b))
-#define desc_equal(desc1, desc2)	(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
-
-#define GDT_ENTRY_TLS_ENTRIES	3
-#define GDT_ENTRY_TLS_MIN	6
-#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
-
-#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
-
-struct ia64_partial_page_list;
-#endif
-
-struct thread_struct {
-	__u32 flags;			/* various thread flags (see IA64_THREAD_*) */
-	/* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
-	__u8 on_ustack;			/* executing on user-stacks? */
-	__u8 pad[3];
-	__u64 ksp;			/* kernel stack pointer */
-	__u64 map_base;			/* base address for get_unmapped_area() */
-	__u64 task_size;		/* limit for task size */
-	__u64 rbs_bot;			/* the base address for the RBS */
-	int last_fph_cpu;		/* CPU that may hold the contents of f32-f127 */
-
-#ifdef CONFIG_IA32_SUPPORT
-	__u64 eflag;			/* IA32 EFLAGS reg */
-	__u64 fsr;			/* IA32 floating pt status reg */
-	__u64 fcr;			/* IA32 floating pt control reg */
-	__u64 fir;			/* IA32 fp except. instr. reg */
-	__u64 fdr;			/* IA32 fp except. data reg */
-	__u64 old_k1;			/* old value of ar.k1 */
-	__u64 old_iob;			/* old IOBase value */
-	struct ia64_partial_page_list *ppl; /* partial page list for 4K page size issue */
-        /* cached TLS descriptors. */
-	struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
-
-# define INIT_THREAD_IA32	.eflag =	0,			\
-				.fsr =		0,			\
-				.fcr =		0x17800000037fULL,	\
-				.fir =		0,			\
-				.fdr =		0,			\
-				.old_k1 =	0,			\
-				.old_iob =	0,			\
-				.ppl =		NULL,
-#else
-# define INIT_THREAD_IA32
-#endif /* CONFIG_IA32_SUPPORT */
-#ifdef CONFIG_PERFMON
-	void *pfm_context;		     /* pointer to detailed PMU context */
-	unsigned long pfm_needs_checking;    /* when >0, pending perfmon work on kernel exit */
-# define INIT_THREAD_PM		.pfm_context =		NULL,     \
-				.pfm_needs_checking =	0UL,
-#else
-# define INIT_THREAD_PM
-#endif
-	__u64 dbr[IA64_NUM_DBG_REGS];
-	__u64 ibr[IA64_NUM_DBG_REGS];
-	struct ia64_fpreg fph[96];	/* saved/loaded on demand */
-};
-
-#define INIT_THREAD {						\
-	.flags =	0,					\
-	.on_ustack =	0,					\
-	.ksp =		0,					\
-	.map_base =	DEFAULT_MAP_BASE,			\
-	.rbs_bot =	STACK_TOP - DEFAULT_USER_STACK_SIZE,	\
-	.task_size =	DEFAULT_TASK_SIZE,			\
-	.last_fph_cpu =  -1,					\
-	INIT_THREAD_IA32					\
-	INIT_THREAD_PM						\
-	.dbr =		{0, },					\
-	.ibr =		{0, },					\
-	.fph =		{{{{0}}}, }				\
-}
-
-#define start_thread(regs,new_ip,new_sp) do {							\
-	set_fs(USER_DS);									\
-	regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL))		\
-			 & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS));		\
-	regs->cr_iip = new_ip;									\
-	regs->ar_rsc = 0xf;		/* eager mode, privilege level 3 */			\
-	regs->ar_rnat = 0;									\
-	regs->ar_bspstore = current->thread.rbs_bot;						\
-	regs->ar_fpsr = FPSR_DEFAULT;								\
-	regs->loadrs = 0;									\
-	regs->r8 = get_dumpable(current->mm);	/* set "don't zap registers" flag */		\
-	regs->r12 = new_sp - 16;	/* allocate 16 byte scratch area */			\
-	if (unlikely(!get_dumpable(current->mm))) {							\
-		/*										\
-		 * Zap scratch regs to avoid leaking bits between processes with different	\
-		 * uid/privileges.								\
-		 */										\
-		regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0;					\
-		regs->r1 = 0; regs->r9  = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0;	\
-	}											\
-} while (0)
-
-/* Forward declarations, a strange C thing... */
-struct mm_struct;
-struct task_struct;
-
-/*
- * Free all resources held by a thread. This is called after the
- * parent of DEAD_TASK has collected the exit status of the task via
- * wait().
- */
-#define release_thread(dead_task)
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-/*
- * This is the mechanism for creating a new kernel thread.
- *
- * NOTE 1: Only a kernel-only process (ie the swapper or direct
- * descendants who haven't done an "execve()") should use this: it
- * will work within a system call from a "real" process, but the
- * process memory space will not be free'd until both the parent and
- * the child have exited.
- *
- * NOTE 2: This MUST NOT be an inlined function.  Otherwise, we get
- * into trouble in init/main.c when the child thread returns to
- * do_basic_setup() and the timing is such that free_initmem() has
- * been called already.
- */
-extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags);
-
-/* Get wait channel for task P.  */
-extern unsigned long get_wchan (struct task_struct *p);
-
-/* Return instruction pointer of blocked task TSK.  */
-#define KSTK_EIP(tsk)					\
-  ({							\
-	struct pt_regs *_regs = task_pt_regs(tsk);	\
-	_regs->cr_iip + ia64_psr(_regs)->ri;		\
-  })
-
-/* Return stack pointer of blocked task TSK.  */
-#define KSTK_ESP(tsk)  ((tsk)->thread.ksp)
-
-extern void ia64_getreg_unknown_kr (void);
-extern void ia64_setreg_unknown_kr (void);
-
-#define ia64_get_kr(regnum)					\
-({								\
-	unsigned long r = 0;					\
-								\
-	switch (regnum) {					\
-	    case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break;	\
-	    case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break;	\
-	    case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break;	\
-	    case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break;	\
-	    case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break;	\
-	    case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break;	\
-	    case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break;	\
-	    case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break;	\
-	    default: ia64_getreg_unknown_kr(); break;		\
-	}							\
-	r;							\
-})
-
-#define ia64_set_kr(regnum, r) 					\
-({								\
-	switch (regnum) {					\
-	    case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break;	\
-	    case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break;	\
-	    case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break;	\
-	    case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break;	\
-	    case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break;	\
-	    case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break;	\
-	    case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break;	\
-	    case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break;	\
-	    default: ia64_setreg_unknown_kr(); break;		\
-	}							\
-})
-
-/*
- * The following three macros can't be inline functions because we don't have struct
- * task_struct at this point.
- */
-
-/*
- * Return TRUE if task T owns the fph partition of the CPU we're running on.
- * Must be called from code that has preemption disabled.
- */
-#define ia64_is_local_fpu_owner(t)								\
-({												\
-	struct task_struct *__ia64_islfo_task = (t);						\
-	(__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id()				\
-	 && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER));	\
-})
-
-/*
- * Mark task T as owning the fph partition of the CPU we're running on.
- * Must be called from code that has preemption disabled.
- */
-#define ia64_set_local_fpu_owner(t) do {						\
-	struct task_struct *__ia64_slfo_task = (t);					\
-	__ia64_slfo_task->thread.last_fph_cpu = smp_processor_id();			\
-	ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task);		\
-} while (0)
-
-/* Mark the fph partition of task T as being invalid on all CPUs.  */
-#define ia64_drop_fpu(t)	((t)->thread.last_fph_cpu = -1)
-
-extern void __ia64_init_fpu (void);
-extern void __ia64_save_fpu (struct ia64_fpreg *fph);
-extern void __ia64_load_fpu (struct ia64_fpreg *fph);
-extern void ia64_save_debug_regs (unsigned long *save_area);
-extern void ia64_load_debug_regs (unsigned long *save_area);
-
-#ifdef CONFIG_IA32_SUPPORT
-extern void ia32_save_state (struct task_struct *task);
-extern void ia32_load_state (struct task_struct *task);
-#endif
-
-#define ia64_fph_enable()	do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
-#define ia64_fph_disable()	do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
-
-/* load fp 0.0 into fph */
-static inline void
-ia64_init_fpu (void) {
-	ia64_fph_enable();
-	__ia64_init_fpu();
-	ia64_fph_disable();
-}
-
-/* save f32-f127 at FPH */
-static inline void
-ia64_save_fpu (struct ia64_fpreg *fph) {
-	ia64_fph_enable();
-	__ia64_save_fpu(fph);
-	ia64_fph_disable();
-}
-
-/* load f32-f127 from FPH */
-static inline void
-ia64_load_fpu (struct ia64_fpreg *fph) {
-	ia64_fph_enable();
-	__ia64_load_fpu(fph);
-	ia64_fph_disable();
-}
-
-static inline __u64
-ia64_clear_ic (void)
-{
-	__u64 psr;
-	psr = ia64_getreg(_IA64_REG_PSR);
-	ia64_stop();
-	ia64_rsm(IA64_PSR_I | IA64_PSR_IC);
-	ia64_srlz_i();
-	return psr;
-}
-
-/*
- * Restore the psr.
- */
-static inline void
-ia64_set_psr (__u64 psr)
-{
-	ia64_stop();
-	ia64_setreg(_IA64_REG_PSR_L, psr);
-	ia64_srlz_i();
-}
-
-/*
- * Insert a translation into an instruction and/or data translation
- * register.
- */
-static inline void
-ia64_itr (__u64 target_mask, __u64 tr_num,
-	  __u64 vmaddr, __u64 pte,
-	  __u64 log_page_size)
-{
-	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
-	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
-	ia64_stop();
-	if (target_mask & 0x1)
-		ia64_itri(tr_num, pte);
-	if (target_mask & 0x2)
-		ia64_itrd(tr_num, pte);
-}
-
-/*
- * Insert a translation into the instruction and/or data translation
- * cache.
- */
-static inline void
-ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte,
-	  __u64 log_page_size)
-{
-	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
-	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
-	ia64_stop();
-	/* as per EAS2.6, itc must be the last instruction in an instruction group */
-	if (target_mask & 0x1)
-		ia64_itci(pte);
-	if (target_mask & 0x2)
-		ia64_itcd(pte);
-}
-
-/*
- * Purge a range of addresses from instruction and/or data translation
- * register(s).
- */
-static inline void
-ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size)
-{
-	if (target_mask & 0x1)
-		ia64_ptri(vmaddr, (log_size << 2));
-	if (target_mask & 0x2)
-		ia64_ptrd(vmaddr, (log_size << 2));
-}
-
-/* Set the interrupt vector address.  The address must be suitably aligned (32KB).  */
-static inline void
-ia64_set_iva (void *ivt_addr)
-{
-	ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr);
-	ia64_srlz_i();
-}
-
-/* Set the page table address and control bits.  */
-static inline void
-ia64_set_pta (__u64 pta)
-{
-	/* Note: srlz.i implies srlz.d */
-	ia64_setreg(_IA64_REG_CR_PTA, pta);
-	ia64_srlz_i();
-}
-
-static inline void
-ia64_eoi (void)
-{
-	ia64_setreg(_IA64_REG_CR_EOI, 0);
-	ia64_srlz_d();
-}
-
-#define cpu_relax()	ia64_hint(ia64_hint_pause)
-
-static inline int
-ia64_get_irr(unsigned int vector)
-{
-	unsigned int reg = vector / 64;
-	unsigned int bit = vector % 64;
-	u64 irr;
-
-	switch (reg) {
-	case 0: irr = ia64_getreg(_IA64_REG_CR_IRR0); break;
-	case 1: irr = ia64_getreg(_IA64_REG_CR_IRR1); break;
-	case 2: irr = ia64_getreg(_IA64_REG_CR_IRR2); break;
-	case 3: irr = ia64_getreg(_IA64_REG_CR_IRR3); break;
-	}
-
-	return test_bit(bit, &irr);
-}
-
-static inline void
-ia64_set_lrr0 (unsigned long val)
-{
-	ia64_setreg(_IA64_REG_CR_LRR0, val);
-	ia64_srlz_d();
-}
-
-static inline void
-ia64_set_lrr1 (unsigned long val)
-{
-	ia64_setreg(_IA64_REG_CR_LRR1, val);
-	ia64_srlz_d();
-}
-
-
-/*
- * Given the address to which a spill occurred, return the unat bit
- * number that corresponds to this address.
- */
-static inline __u64
-ia64_unat_pos (void *spill_addr)
-{
-	return ((__u64) spill_addr >> 3) & 0x3f;
-}
-
-/*
- * Set the NaT bit of an integer register which was spilled at address
- * SPILL_ADDR.  UNAT is the mask to be updated.
- */
-static inline void
-ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat)
-{
-	__u64 bit = ia64_unat_pos(spill_addr);
-	__u64 mask = 1UL << bit;
-
-	*unat = (*unat & ~mask) | (nat << bit);
-}
-
-/*
- * Return saved PC of a blocked thread.
- * Note that the only way T can block is through a call to schedule() -> switch_to().
- */
-static inline unsigned long
-thread_saved_pc (struct task_struct *t)
-{
-	struct unw_frame_info info;
-	unsigned long ip;
-
-	unw_init_from_blocked_task(&info, t);
-	if (unw_unwind(&info) < 0)
-		return 0;
-	unw_get_ip(&info, &ip);
-	return ip;
-}
-
-/*
- * Get the current instruction/program counter value.
- */
-#define current_text_addr() \
-	({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; })
-
-static inline __u64
-ia64_get_ivr (void)
-{
-	__u64 r;
-	ia64_srlz_d();
-	r = ia64_getreg(_IA64_REG_CR_IVR);
-	ia64_srlz_d();
-	return r;
-}
-
-static inline void
-ia64_set_dbr (__u64 regnum, __u64 value)
-{
-	__ia64_set_dbr(regnum, value);
-#ifdef CONFIG_ITANIUM
-	ia64_srlz_d();
-#endif
-}
-
-static inline __u64
-ia64_get_dbr (__u64 regnum)
-{
-	__u64 retval;
-
-	retval = __ia64_get_dbr(regnum);
-#ifdef CONFIG_ITANIUM
-	ia64_srlz_d();
-#endif
-	return retval;
-}
-
-static inline __u64
-ia64_rotr (__u64 w, __u64 n)
-{
-	return (w >> n) | (w << (64 - n));
-}
-
-#define ia64_rotl(w,n)	ia64_rotr((w), (64) - (n))
-
-/*
- * Take a mapped kernel address and return the equivalent address
- * in the region 7 identity mapped virtual area.
- */
-static inline void *
-ia64_imva (void *addr)
-{
-	void *result;
-	result = (void *) ia64_tpa(addr);
-	return __va(result);
-}
-
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-#define PREFETCH_STRIDE			L1_CACHE_BYTES
-
-static inline void
-prefetch (const void *x)
-{
-	 ia64_lfetch(ia64_lfhint_none, x);
-}
-
-static inline void
-prefetchw (const void *x)
-{
-	ia64_lfetch_excl(ia64_lfhint_none, x);
-}
-
-#define spin_lock_prefetch(x)	prefetchw(x)
-
-extern unsigned long boot_option_idle_override;
-extern unsigned long idle_halt;
-extern unsigned long idle_nomwait;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_PROCESSOR_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
deleted file mode 100644
index 15f8dcfe6eee..000000000000
--- a/include/asm-ia64/ptrace.h
+++ /dev/null
@@ -1,364 +0,0 @@
-#ifndef _ASM_IA64_PTRACE_H
-#define _ASM_IA64_PTRACE_H
-
-/*
- * Copyright (C) 1998-2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- * Copyright (C) 2003 Intel Co
- *	Suresh Siddha <suresh.b.siddha@intel.com>
- *	Fenghua Yu <fenghua.yu@intel.com>
- *	Arun Sharma <arun.sharma@intel.com>
- *
- * 12/07/98	S. Eranian	added pt_regs & switch_stack
- * 12/21/98	D. Mosberger	updated to match latest code
- *  6/17/99	D. Mosberger	added second unat member to "struct switch_stack"
- *
- */
-/*
- * When a user process is blocked, its state looks as follows:
- *
- *            +----------------------+	-------	IA64_STK_OFFSET
- *     	      |			     |	 ^
- *            | struct pt_regs       |	 |
- *	      |			     |	 |
- *            +----------------------+	 |
- *	      |			     |	 |
- *     	      |	   memory stack	     |	 |
- *	      |	(growing downwards)  |	 |
- *	      //.....................//	 |
- *					 |
- *	      //.....................//	 |
- *	      |			     |	 |
- *            +----------------------+	 |
- *            | struct switch_stack  |	 |
- *	      |			     |	 |
- *	      +----------------------+	 |
- *	      |			     |	 |
- *	      //.....................//	 |
- *					 |
- *	      //.....................//	 |
- *	      |			     |	 |
- *	      |	 register stack	     |	 |
- *	      |	(growing upwards)    |	 |
- *            |			     |	 |
- *	      +----------------------+	 |  ---	IA64_RBS_OFFSET
- *            |  struct thread_info  |	 |  ^
- *	      +----------------------+	 |  |
- *	      |			     |	 |  |
- *            |  struct task_struct  |	 |  |
- * current -> |			     |   |  |
- *	      +----------------------+ -------
- *
- * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
- * This is because ar.ec is saved as part of ar.pfs.
- */
-
-
-#include <asm/fpu.h>
-
-#ifdef __KERNEL__
-#ifndef ASM_OFFSETS_C
-#include <asm/asm-offsets.h>
-#endif
-
-/*
- * Base-2 logarithm of number of pages to allocate per task structure
- * (including register backing store and memory stack):
- */
-#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
-# define KERNEL_STACK_SIZE_ORDER		3
-#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
-# define KERNEL_STACK_SIZE_ORDER		2
-#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
-# define KERNEL_STACK_SIZE_ORDER		1
-#else
-# define KERNEL_STACK_SIZE_ORDER		0
-#endif
-
-#define IA64_RBS_OFFSET			((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
-#define IA64_STK_OFFSET			((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
-
-#define KERNEL_STACK_SIZE		IA64_STK_OFFSET
-
-#endif /* __KERNEL__ */
-
-#ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are saved on system
- * calls.
- *
- * We don't save all floating point register because the kernel
- * is compiled to use only a very small subset, so the other are
- * untouched.
- *
- * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
- * (because the memory stack pointer MUST ALWAYS be aligned this way)
- *
- */
-struct pt_regs {
-	/* The following registers are saved by SAVE_MIN: */
-	unsigned long b6;		/* scratch */
-	unsigned long b7;		/* scratch */
-
-	unsigned long ar_csd;           /* used by cmp8xchg16 (scratch) */
-	unsigned long ar_ssd;           /* reserved for future use (scratch) */
-
-	unsigned long r8;		/* scratch (return value register 0) */
-	unsigned long r9;		/* scratch (return value register 1) */
-	unsigned long r10;		/* scratch (return value register 2) */
-	unsigned long r11;		/* scratch (return value register 3) */
-
-	unsigned long cr_ipsr;		/* interrupted task's psr */
-	unsigned long cr_iip;		/* interrupted task's instruction pointer */
-	/*
-	 * interrupted task's function state; if bit 63 is cleared, it
-	 * contains syscall's ar.pfs.pfm:
-	 */
-	unsigned long cr_ifs;
-
-	unsigned long ar_unat;		/* interrupted task's NaT register (preserved) */
-	unsigned long ar_pfs;		/* prev function state  */
-	unsigned long ar_rsc;		/* RSE configuration */
-	/* The following two are valid only if cr_ipsr.cpl > 0 || ti->flags & _TIF_MCA_INIT */
-	unsigned long ar_rnat;		/* RSE NaT */
-	unsigned long ar_bspstore;	/* RSE bspstore */
-
-	unsigned long pr;		/* 64 predicate registers (1 bit each) */
-	unsigned long b0;		/* return pointer (bp) */
-	unsigned long loadrs;		/* size of dirty partition << 16 */
-
-	unsigned long r1;		/* the gp pointer */
-	unsigned long r12;		/* interrupted task's memory stack pointer */
-	unsigned long r13;		/* thread pointer */
-
-	unsigned long ar_fpsr;		/* floating point status (preserved) */
-	unsigned long r15;		/* scratch */
-
-	/* The remaining registers are NOT saved for system calls.  */
-
-	unsigned long r14;		/* scratch */
-	unsigned long r2;		/* scratch */
-	unsigned long r3;		/* scratch */
-
-	/* The following registers are saved by SAVE_REST: */
-	unsigned long r16;		/* scratch */
-	unsigned long r17;		/* scratch */
-	unsigned long r18;		/* scratch */
-	unsigned long r19;		/* scratch */
-	unsigned long r20;		/* scratch */
-	unsigned long r21;		/* scratch */
-	unsigned long r22;		/* scratch */
-	unsigned long r23;		/* scratch */
-	unsigned long r24;		/* scratch */
-	unsigned long r25;		/* scratch */
-	unsigned long r26;		/* scratch */
-	unsigned long r27;		/* scratch */
-	unsigned long r28;		/* scratch */
-	unsigned long r29;		/* scratch */
-	unsigned long r30;		/* scratch */
-	unsigned long r31;		/* scratch */
-
-	unsigned long ar_ccv;		/* compare/exchange value (scratch) */
-
-	/*
-	 * Floating point registers that the kernel considers scratch:
-	 */
-	struct ia64_fpreg f6;		/* scratch */
-	struct ia64_fpreg f7;		/* scratch */
-	struct ia64_fpreg f8;		/* scratch */
-	struct ia64_fpreg f9;		/* scratch */
-	struct ia64_fpreg f10;		/* scratch */
-	struct ia64_fpreg f11;		/* scratch */
-};
-
-/*
- * This structure contains the addition registers that need to
- * preserved across a context switch.  This generally consists of
- * "preserved" registers.
- */
-struct switch_stack {
-	unsigned long caller_unat;	/* user NaT collection register (preserved) */
-	unsigned long ar_fpsr;		/* floating-point status register */
-
-	struct ia64_fpreg f2;		/* preserved */
-	struct ia64_fpreg f3;		/* preserved */
-	struct ia64_fpreg f4;		/* preserved */
-	struct ia64_fpreg f5;		/* preserved */
-
-	struct ia64_fpreg f12;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f13;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f14;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f15;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f16;		/* preserved */
-	struct ia64_fpreg f17;		/* preserved */
-	struct ia64_fpreg f18;		/* preserved */
-	struct ia64_fpreg f19;		/* preserved */
-	struct ia64_fpreg f20;		/* preserved */
-	struct ia64_fpreg f21;		/* preserved */
-	struct ia64_fpreg f22;		/* preserved */
-	struct ia64_fpreg f23;		/* preserved */
-	struct ia64_fpreg f24;		/* preserved */
-	struct ia64_fpreg f25;		/* preserved */
-	struct ia64_fpreg f26;		/* preserved */
-	struct ia64_fpreg f27;		/* preserved */
-	struct ia64_fpreg f28;		/* preserved */
-	struct ia64_fpreg f29;		/* preserved */
-	struct ia64_fpreg f30;		/* preserved */
-	struct ia64_fpreg f31;		/* preserved */
-
-	unsigned long r4;		/* preserved */
-	unsigned long r5;		/* preserved */
-	unsigned long r6;		/* preserved */
-	unsigned long r7;		/* preserved */
-
-	unsigned long b0;		/* so we can force a direct return in copy_thread */
-	unsigned long b1;
-	unsigned long b2;
-	unsigned long b3;
-	unsigned long b4;
-	unsigned long b5;
-
-	unsigned long ar_pfs;		/* previous function state */
-	unsigned long ar_lc;		/* loop counter (preserved) */
-	unsigned long ar_unat;		/* NaT bits for r4-r7 */
-	unsigned long ar_rnat;		/* RSE NaT collection register */
-	unsigned long ar_bspstore;	/* RSE dirty base (preserved) */
-	unsigned long pr;		/* 64 predicate registers (1 bit each) */
-};
-
-#ifdef __KERNEL__
-
-#include <asm/current.h>
-#include <asm/page.h>
-
-/*
- * We use the ia64_psr(regs)->ri to determine which of the three
- * instructions in bundle (16 bytes) took the sample. Generate
- * the canonical representation by adding to instruction pointer.
- */
-# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
-
-#define regs_return_value(regs) ((regs)->r8)
-
-/* Conserve space in histogram by encoding slot bits in address
- * bits 2 and 3 rather than bits 0 and 1.
- */
-#define profile_pc(regs)						\
-({									\
-	unsigned long __ip = instruction_pointer(regs);			\
-	(__ip & ~3UL) + ((__ip & 3UL) << 2);				\
-})
-
-  /* given a pointer to a task_struct, return the user's pt_regs */
-# define task_pt_regs(t)		(((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1)
-# define ia64_psr(regs)			((struct ia64_psr *) &(regs)->cr_ipsr)
-# define user_mode(regs)		(((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0)
-# define user_stack(task,regs)	((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs))
-# define fsys_mode(task,regs)					\
-  ({								\
-	  struct task_struct *_task = (task);			\
-	  struct pt_regs *_regs = (regs);			\
-	  !user_mode(_regs) && user_stack(_task, _regs);	\
-  })
-
-  /*
-   * System call handlers that, upon successful completion, need to return a negative value
-   * should call force_successful_syscall_return() right before returning.  On architectures
-   * where the syscall convention provides for a separate error flag (e.g., alpha, ia64,
-   * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error
-   * flag will not get set.  On architectures which do not support a separate error flag,
-   * the macro is a no-op and the spurious error condition needs to be filtered out by some
-   * other means (e.g., in user-level, by passing an extra argument to the syscall handler,
-   * or something along those lines).
-   *
-   * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall.
-   */
-# define force_successful_syscall_return()	(task_pt_regs(current)->r8 = 0)
-
-  struct task_struct;			/* forward decl */
-  struct unw_frame_info;		/* forward decl */
-
-  extern void show_regs (struct pt_regs *);
-  extern void ia64_do_show_stack (struct unw_frame_info *, void *);
-  extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *,
-					      unsigned long *);
-  extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long,
-			 unsigned long, long *);
-  extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long,
-			 unsigned long, long);
-  extern void ia64_flush_fph (struct task_struct *);
-  extern void ia64_sync_fph (struct task_struct *);
-  extern void ia64_sync_krbs(void);
-  extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *,
-				  unsigned long, unsigned long);
-
-  /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */
-  extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat);
-  /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */
-  extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat);
-
-  extern void ia64_increment_ip (struct pt_regs *pt);
-  extern void ia64_decrement_ip (struct pt_regs *pt);
-
-  extern void ia64_ptrace_stop(void);
-  #define arch_ptrace_stop(code, info) \
-	ia64_ptrace_stop()
-  #define arch_ptrace_stop_needed(code, info) \
-	(!test_thread_flag(TIF_RESTORE_RSE))
-
-  extern void ptrace_attach_sync_user_rbs (struct task_struct *);
-  #define arch_ptrace_attach(child) \
-	ptrace_attach_sync_user_rbs(child)
-
-  #define arch_has_single_step()  (1)
-  extern void user_enable_single_step(struct task_struct *);
-  extern void user_disable_single_step(struct task_struct *);
-
-  #define arch_has_block_step()   (1)
-  extern void user_enable_block_step(struct task_struct *);
-
-#endif /* !__KERNEL__ */
-
-/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
-struct pt_all_user_regs {
-	unsigned long nat;
-	unsigned long cr_iip;
-	unsigned long cfm;
-	unsigned long cr_ipsr;
-	unsigned long pr;
-
-	unsigned long gr[32];
-	unsigned long br[8];
-	unsigned long ar[128];
-	struct ia64_fpreg fr[128];
-};
-
-#endif /* !__ASSEMBLY__ */
-
-/* indices to application-registers array in pt_all_user_regs */
-#define PT_AUR_RSC	16
-#define PT_AUR_BSP	17
-#define PT_AUR_BSPSTORE	18
-#define PT_AUR_RNAT	19
-#define PT_AUR_CCV	32
-#define PT_AUR_UNAT	36
-#define PT_AUR_FPSR	40
-#define PT_AUR_PFS	64
-#define PT_AUR_LC	65
-#define PT_AUR_EC	66
-
-/*
- * The numbers chosen here are somewhat arbitrary but absolutely MUST
- * not overlap with any of the number assigned in <linux/ptrace.h>.
- */
-#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
-#define PTRACE_OLD_GETSIGINFO	13	/* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>)  */
-#define PTRACE_OLD_SETSIGINFO	14	/* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>)  */
-#define PTRACE_GETREGS		18	/* get all registers (pt_all_user_regs) in one shot */
-#define PTRACE_SETREGS		19	/* set all registers (pt_all_user_regs) in one shot */
-
-#define PTRACE_OLDSETOPTIONS	21
-
-#endif /* _ASM_IA64_PTRACE_H */
diff --git a/include/asm-ia64/ptrace_offsets.h b/include/asm-ia64/ptrace_offsets.h
deleted file mode 100644
index b712773c759e..000000000000
--- a/include/asm-ia64/ptrace_offsets.h
+++ /dev/null
@@ -1,268 +0,0 @@
-#ifndef _ASM_IA64_PTRACE_OFFSETS_H
-#define _ASM_IA64_PTRACE_OFFSETS_H
-
-/*
- * Copyright (C) 1999, 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-/*
- * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a
- * virtual structure that would have the following definition:
- *
- *	struct uarea {
- *		struct ia64_fpreg fph[96];		// f32-f127
- *		unsigned long nat_bits;
- *		unsigned long empty1;
- *		struct ia64_fpreg f2;			// f2-f5
- *			:
- *		struct ia64_fpreg f5;
- *		struct ia64_fpreg f10;			// f10-f31
- *			:
- *		struct ia64_fpreg f31;
- *		unsigned long r4;			// r4-r7
- *			:
- *		unsigned long r7;
- *		unsigned long b1;			// b1-b5
- *			:
- *		unsigned long b5;
- *		unsigned long ar_ec;
- *		unsigned long ar_lc;
- *		unsigned long empty2[5];
- *		unsigned long cr_ipsr;
- *		unsigned long cr_iip;
- *		unsigned long cfm;
- *		unsigned long ar_unat;
- *		unsigned long ar_pfs;
- *		unsigned long ar_rsc;
- *		unsigned long ar_rnat;
- *		unsigned long ar_bspstore;
- *		unsigned long pr;
- *		unsigned long b6;
- *		unsigned long ar_bsp;
- *		unsigned long r1;
- *		unsigned long r2;
- *		unsigned long r3;
- *		unsigned long r12;
- *		unsigned long r13;
- *		unsigned long r14;
- *		unsigned long r15;
- *		unsigned long r8;
- *		unsigned long r9;
- *		unsigned long r10;
- *		unsigned long r11;
- *		unsigned long r16;
- *			:
- *		unsigned long r31;
- *		unsigned long ar_ccv;
- *		unsigned long ar_fpsr;
- *		unsigned long b0;
- *		unsigned long b7;
- *		unsigned long f6;
- *		unsigned long f7;
- *		unsigned long f8;
- *		unsigned long f9;
- *		unsigned long ar_csd;
- *		unsigned long ar_ssd;
- *		unsigned long rsvd1[710];
- *		unsigned long dbr[8];
- *		unsigned long rsvd2[504];
- *		unsigned long ibr[8];
- *		unsigned long rsvd3[504];
- *		unsigned long pmd[4];
- *	}
- */
-
-/* fph: */
-#define PT_F32			0x0000
-#define PT_F33			0x0010
-#define PT_F34			0x0020
-#define PT_F35			0x0030
-#define PT_F36			0x0040
-#define PT_F37			0x0050
-#define PT_F38			0x0060
-#define PT_F39			0x0070
-#define PT_F40			0x0080
-#define PT_F41			0x0090
-#define PT_F42			0x00a0
-#define PT_F43			0x00b0
-#define PT_F44			0x00c0
-#define PT_F45			0x00d0
-#define PT_F46			0x00e0
-#define PT_F47			0x00f0
-#define PT_F48			0x0100
-#define PT_F49			0x0110
-#define PT_F50			0x0120
-#define PT_F51			0x0130
-#define PT_F52			0x0140
-#define PT_F53			0x0150
-#define PT_F54			0x0160
-#define PT_F55			0x0170
-#define PT_F56			0x0180
-#define PT_F57			0x0190
-#define PT_F58			0x01a0
-#define PT_F59			0x01b0
-#define PT_F60			0x01c0
-#define PT_F61			0x01d0
-#define PT_F62			0x01e0
-#define PT_F63			0x01f0
-#define PT_F64			0x0200
-#define PT_F65			0x0210
-#define PT_F66			0x0220
-#define PT_F67			0x0230
-#define PT_F68			0x0240
-#define PT_F69			0x0250
-#define PT_F70			0x0260
-#define PT_F71			0x0270
-#define PT_F72			0x0280
-#define PT_F73			0x0290
-#define PT_F74			0x02a0
-#define PT_F75			0x02b0
-#define PT_F76			0x02c0
-#define PT_F77			0x02d0
-#define PT_F78			0x02e0
-#define PT_F79			0x02f0
-#define PT_F80			0x0300
-#define PT_F81			0x0310
-#define PT_F82			0x0320
-#define PT_F83			0x0330
-#define PT_F84			0x0340
-#define PT_F85			0x0350
-#define PT_F86			0x0360
-#define PT_F87			0x0370
-#define PT_F88			0x0380
-#define PT_F89			0x0390
-#define PT_F90			0x03a0
-#define PT_F91			0x03b0
-#define PT_F92			0x03c0
-#define PT_F93			0x03d0
-#define PT_F94			0x03e0
-#define PT_F95			0x03f0
-#define PT_F96			0x0400
-#define PT_F97			0x0410
-#define PT_F98			0x0420
-#define PT_F99			0x0430
-#define PT_F100			0x0440
-#define PT_F101			0x0450
-#define PT_F102			0x0460
-#define PT_F103			0x0470
-#define PT_F104			0x0480
-#define PT_F105			0x0490
-#define PT_F106			0x04a0
-#define PT_F107			0x04b0
-#define PT_F108			0x04c0
-#define PT_F109			0x04d0
-#define PT_F110			0x04e0
-#define PT_F111			0x04f0
-#define PT_F112			0x0500
-#define PT_F113			0x0510
-#define PT_F114			0x0520
-#define PT_F115			0x0530
-#define PT_F116			0x0540
-#define PT_F117			0x0550
-#define PT_F118			0x0560
-#define PT_F119			0x0570
-#define PT_F120			0x0580
-#define PT_F121			0x0590
-#define PT_F122			0x05a0
-#define PT_F123			0x05b0
-#define PT_F124			0x05c0
-#define PT_F125			0x05d0
-#define PT_F126			0x05e0
-#define PT_F127			0x05f0
-
-#define PT_NAT_BITS		0x0600
-
-#define PT_F2			0x0610
-#define PT_F3			0x0620
-#define PT_F4			0x0630
-#define PT_F5			0x0640
-#define PT_F10			0x0650
-#define PT_F11			0x0660
-#define PT_F12			0x0670
-#define PT_F13			0x0680
-#define PT_F14			0x0690
-#define PT_F15			0x06a0
-#define PT_F16			0x06b0
-#define PT_F17			0x06c0
-#define PT_F18			0x06d0
-#define PT_F19			0x06e0
-#define PT_F20			0x06f0
-#define PT_F21			0x0700
-#define PT_F22			0x0710
-#define PT_F23			0x0720
-#define PT_F24			0x0730
-#define PT_F25			0x0740
-#define PT_F26			0x0750
-#define PT_F27			0x0760
-#define PT_F28			0x0770
-#define PT_F29			0x0780
-#define PT_F30			0x0790
-#define PT_F31			0x07a0
-#define PT_R4			0x07b0
-#define PT_R5			0x07b8
-#define PT_R6			0x07c0
-#define PT_R7			0x07c8
-
-#define PT_B1			0x07d8
-#define PT_B2			0x07e0
-#define PT_B3			0x07e8
-#define PT_B4			0x07f0
-#define PT_B5			0x07f8
-
-#define PT_AR_EC		0x0800
-#define PT_AR_LC		0x0808
-
-#define PT_CR_IPSR		0x0830
-#define PT_CR_IIP		0x0838
-#define PT_CFM			0x0840
-#define PT_AR_UNAT		0x0848
-#define PT_AR_PFS		0x0850
-#define PT_AR_RSC		0x0858
-#define PT_AR_RNAT		0x0860
-#define PT_AR_BSPSTORE		0x0868
-#define PT_PR			0x0870
-#define PT_B6			0x0878
-#define PT_AR_BSP		0x0880	/* note: this points to the *end* of the backing store! */
-#define PT_R1			0x0888
-#define PT_R2			0x0890
-#define PT_R3			0x0898
-#define PT_R12			0x08a0
-#define PT_R13			0x08a8
-#define PT_R14			0x08b0
-#define PT_R15			0x08b8
-#define PT_R8 			0x08c0
-#define PT_R9			0x08c8
-#define PT_R10			0x08d0
-#define PT_R11			0x08d8
-#define PT_R16			0x08e0
-#define PT_R17			0x08e8
-#define PT_R18			0x08f0
-#define PT_R19			0x08f8
-#define PT_R20			0x0900
-#define PT_R21			0x0908
-#define PT_R22			0x0910
-#define PT_R23			0x0918
-#define PT_R24			0x0920
-#define PT_R25			0x0928
-#define PT_R26			0x0930
-#define PT_R27			0x0938
-#define PT_R28			0x0940
-#define PT_R29			0x0948
-#define PT_R30			0x0950
-#define PT_R31			0x0958
-#define PT_AR_CCV		0x0960
-#define PT_AR_FPSR		0x0968
-#define PT_B0			0x0970
-#define PT_B7			0x0978
-#define PT_F6			0x0980
-#define PT_F7			0x0990
-#define PT_F8			0x09a0
-#define PT_F9			0x09b0
-#define PT_AR_CSD		0x09c0
-#define PT_AR_SSD		0x09c8
-
-#define PT_DBR			0x2000	/* data breakpoint registers */
-#define PT_IBR			0x3000	/* instruction breakpoint registers */
-#define PT_PMD			0x4000	/* performance monitoring counters */
-
-#endif /* _ASM_IA64_PTRACE_OFFSETS_H */
diff --git a/include/asm-ia64/resource.h b/include/asm-ia64/resource.h
deleted file mode 100644
index ba2272a87fc7..000000000000
--- a/include/asm-ia64/resource.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ASM_IA64_RESOURCE_H
-#define _ASM_IA64_RESOURCE_H
-
-#include <asm/ustack.h>
-#include <asm-generic/resource.h>
-
-#endif /* _ASM_IA64_RESOURCE_H */
diff --git a/include/asm-ia64/rse.h b/include/asm-ia64/rse.h
deleted file mode 100644
index 02830a3b0196..000000000000
--- a/include/asm-ia64/rse.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _ASM_IA64_RSE_H
-#define _ASM_IA64_RSE_H
-
-/*
- * Copyright (C) 1998, 1999 Hewlett-Packard Co
- * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * Register stack engine related helper functions.  This file may be
- * used in applications, so be careful about the name-space and give
- * some consideration to non-GNU C compilers (though __inline__ is
- * fine).
- */
-
-static __inline__ unsigned long
-ia64_rse_slot_num (unsigned long *addr)
-{
-	return (((unsigned long) addr) >> 3) & 0x3f;
-}
-
-/*
- * Return TRUE if ADDR is the address of an RNAT slot.
- */
-static __inline__ unsigned long
-ia64_rse_is_rnat_slot (unsigned long *addr)
-{
-	return ia64_rse_slot_num(addr) == 0x3f;
-}
-
-/*
- * Returns the address of the RNAT slot that covers the slot at
- * address SLOT_ADDR.
- */
-static __inline__ unsigned long *
-ia64_rse_rnat_addr (unsigned long *slot_addr)
-{
-	return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
-}
-
-/*
- * Calculate the number of registers in the dirty partition starting at BSPSTORE and
- * ending at BSP.  This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores
- * ar.rnat.
- */
-static __inline__ unsigned long
-ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp)
-{
-	unsigned long slots = (bsp - bspstore);
-
-	return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40;
-}
-
-/*
- * The inverse of the above: given bspstore and the number of
- * registers, calculate ar.bsp.
- */
-static __inline__ unsigned long *
-ia64_rse_skip_regs (unsigned long *addr, long num_regs)
-{
-	long delta = ia64_rse_slot_num(addr) + num_regs;
-
-	if (num_regs < 0)
-		delta -= 0x3e;
-	return addr + num_regs + delta/0x3f;
-}
-
-#endif /* _ASM_IA64_RSE_H */
diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h
deleted file mode 100644
index 8aba06a7b038..000000000000
--- a/include/asm-ia64/rwsem.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * asm-ia64/rwsem.h: R/W semaphores for ia64
- *
- * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
- * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 2005 Christoph Lameter <clameter@sgi.com>
- *
- * Based on asm-i386/rwsem.h and other architecture implementation.
- *
- * The MSW of the count is the negated number of active writers and
- * waiting lockers, and the LSW is the total number of active locks.
- *
- * The lock count is initialized to 0 (no active and no waiting lockers).
- *
- * When a writer subtracts WRITE_BIAS, it'll get 0xffffffff00000001 for
- * the case of an uncontended lock. Readers increment by 1 and see a positive
- * value when uncontended, negative if there are writers (and maybe) readers
- * waiting (in which case it goes to sleep).
- */
-
-#ifndef _ASM_IA64_RWSEM_H
-#define _ASM_IA64_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-#include <asm/intrinsics.h>
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-	signed long		count;
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-};
-
-#define RWSEM_UNLOCKED_VALUE		__IA64_UL_CONST(0x0000000000000000)
-#define RWSEM_ACTIVE_BIAS		__IA64_UL_CONST(0x0000000000000001)
-#define RWSEM_ACTIVE_MASK		__IA64_UL_CONST(0x00000000ffffffff)
-#define RWSEM_WAITING_BIAS		-__IA64_UL_CONST(0x0000000100000000)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-#define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
-	  LIST_HEAD_INIT((name).wait_list) }
-
-#define DECLARE_RWSEM(name) \
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-static inline void
-init_rwsem (struct rw_semaphore *sem)
-{
-	sem->count = RWSEM_UNLOCKED_VALUE;
-	spin_lock_init(&sem->wait_lock);
-	INIT_LIST_HEAD(&sem->wait_list);
-}
-
-/*
- * lock for reading
- */
-static inline void
-__down_read (struct rw_semaphore *sem)
-{
-	long result = ia64_fetchadd8_acq((unsigned long *)&sem->count, 1);
-
-	if (result < 0)
-		rwsem_down_read_failed(sem);
-}
-
-/*
- * lock for writing
- */
-static inline void
-__down_write (struct rw_semaphore *sem)
-{
-	long old, new;
-
-	do {
-		old = sem->count;
-		new = old + RWSEM_ACTIVE_WRITE_BIAS;
-	} while (cmpxchg_acq(&sem->count, old, new) != old);
-
-	if (old != 0)
-		rwsem_down_write_failed(sem);
-}
-
-/*
- * unlock after reading
- */
-static inline void
-__up_read (struct rw_semaphore *sem)
-{
-	long result = ia64_fetchadd8_rel((unsigned long *)&sem->count, -1);
-
-	if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
-		rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void
-__up_write (struct rw_semaphore *sem)
-{
-	long old, new;
-
-	do {
-		old = sem->count;
-		new = old - RWSEM_ACTIVE_WRITE_BIAS;
-	} while (cmpxchg_rel(&sem->count, old, new) != old);
-
-	if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
-		rwsem_wake(sem);
-}
-
-/*
- * trylock for reading -- returns 1 if successful, 0 if contention
- */
-static inline int
-__down_read_trylock (struct rw_semaphore *sem)
-{
-	long tmp;
-	while ((tmp = sem->count) >= 0) {
-		if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * trylock for writing -- returns 1 if successful, 0 if contention
- */
-static inline int
-__down_write_trylock (struct rw_semaphore *sem)
-{
-	long tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
-			      RWSEM_ACTIVE_WRITE_BIAS);
-	return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void
-__downgrade_write (struct rw_semaphore *sem)
-{
-	long old, new;
-
-	do {
-		old = sem->count;
-		new = old - RWSEM_WAITING_BIAS;
-	} while (cmpxchg_rel(&sem->count, old, new) != old);
-
-	if (old < 0)
-		rwsem_downgrade_wake(sem);
-}
-
-/*
- * Implement atomic add functionality.  These used to be "inline" functions, but GCC v3.1
- * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
- */
-#define rwsem_atomic_add(delta, sem)	atomic64_add(delta, (atomic64_t *)(&(sem)->count))
-#define rwsem_atomic_update(delta, sem)	atomic64_add_return(delta, (atomic64_t *)(&(sem)->count))
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif /* _ASM_IA64_RWSEM_H */
diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
deleted file mode 100644
index 89594b442f83..000000000000
--- a/include/asm-ia64/sal.h
+++ /dev/null
@@ -1,905 +0,0 @@
-#ifndef _ASM_IA64_SAL_H
-#define _ASM_IA64_SAL_H
-
-/*
- * System Abstraction Layer definitions.
- *
- * This is based on version 2.5 of the manual "IA-64 System
- * Abstraction Layer".
- *
- * Copyright (C) 2001 Intel
- * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
- * Copyright (C) 2001 Fred Lewis <frederick.v.lewis@intel.com>
- * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
- *
- * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001
- *		    revision of the SAL spec.
- * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000
- *                  revision of the SAL spec.
- * 99/09/29 davidm	Updated for SAL 2.6.
- * 00/03/29 cfleck      Updated SAL Error Logging info for processor (SAL 2.6)
- *                      (plus examples of platform error info structures from smariset @ Intel)
- */
-
-#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT		0
-#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT	1
-#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT	2
-#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT	 	3
-
-#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK	  (1<<IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT)
-#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT)
-#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT)
-#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT	  (1<<IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/bcd.h>
-#include <linux/spinlock.h>
-#include <linux/efi.h>
-
-#include <asm/pal.h>
-#include <asm/system.h>
-#include <asm/fpu.h>
-
-extern spinlock_t sal_lock;
-
-/* SAL spec _requires_ eight args for each call. */
-#define __IA64_FW_CALL(entry,result,a0,a1,a2,a3,a4,a5,a6,a7)	\
-	result = (*entry)(a0,a1,a2,a3,a4,a5,a6,a7)
-
-# define IA64_FW_CALL(entry,result,args...) do {		\
-	unsigned long __ia64_sc_flags;				\
-	struct ia64_fpreg __ia64_sc_fr[6];			\
-	ia64_save_scratch_fpregs(__ia64_sc_fr);			\
-	spin_lock_irqsave(&sal_lock, __ia64_sc_flags);		\
-	__IA64_FW_CALL(entry, result, args);			\
-	spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags);	\
-	ia64_load_scratch_fpregs(__ia64_sc_fr);			\
-} while (0)
-
-# define SAL_CALL(result,args...)			\
-	IA64_FW_CALL(ia64_sal, result, args);
-
-# define SAL_CALL_NOLOCK(result,args...) do {		\
-	unsigned long __ia64_scn_flags;			\
-	struct ia64_fpreg __ia64_scn_fr[6];		\
-	ia64_save_scratch_fpregs(__ia64_scn_fr);	\
-	local_irq_save(__ia64_scn_flags);		\
-	__IA64_FW_CALL(ia64_sal, result, args);		\
-	local_irq_restore(__ia64_scn_flags);		\
-	ia64_load_scratch_fpregs(__ia64_scn_fr);	\
-} while (0)
-
-# define SAL_CALL_REENTRANT(result,args...) do {	\
-	struct ia64_fpreg __ia64_scs_fr[6];		\
-	ia64_save_scratch_fpregs(__ia64_scs_fr);	\
-	preempt_disable();				\
-	__IA64_FW_CALL(ia64_sal, result, args);		\
-	preempt_enable();				\
-	ia64_load_scratch_fpregs(__ia64_scs_fr);	\
-} while (0)
-
-#define SAL_SET_VECTORS			0x01000000
-#define SAL_GET_STATE_INFO		0x01000001
-#define SAL_GET_STATE_INFO_SIZE		0x01000002
-#define SAL_CLEAR_STATE_INFO		0x01000003
-#define SAL_MC_RENDEZ			0x01000004
-#define SAL_MC_SET_PARAMS		0x01000005
-#define SAL_REGISTER_PHYSICAL_ADDR	0x01000006
-
-#define SAL_CACHE_FLUSH			0x01000008
-#define SAL_CACHE_INIT			0x01000009
-#define SAL_PCI_CONFIG_READ		0x01000010
-#define SAL_PCI_CONFIG_WRITE		0x01000011
-#define SAL_FREQ_BASE			0x01000012
-#define SAL_PHYSICAL_ID_INFO		0x01000013
-
-#define SAL_UPDATE_PAL			0x01000020
-
-struct ia64_sal_retval {
-	/*
-	 * A zero status value indicates call completed without error.
-	 * A negative status value indicates reason of call failure.
-	 * A positive status value indicates success but an
-	 * informational value should be printed (e.g., "reboot for
-	 * change to take effect").
-	 */
-	s64 status;
-	u64 v0;
-	u64 v1;
-	u64 v2;
-};
-
-typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);
-
-enum {
-	SAL_FREQ_BASE_PLATFORM = 0,
-	SAL_FREQ_BASE_INTERVAL_TIMER = 1,
-	SAL_FREQ_BASE_REALTIME_CLOCK = 2
-};
-
-/*
- * The SAL system table is followed by a variable number of variable
- * length descriptors.  The structure of these descriptors follows
- * below.
- * The defininition follows SAL specs from July 2000
- */
-struct ia64_sal_systab {
-	u8 signature[4];	/* should be "SST_" */
-	u32 size;		/* size of this table in bytes */
-	u8 sal_rev_minor;
-	u8 sal_rev_major;
-	u16 entry_count;	/* # of entries in variable portion */
-	u8 checksum;
-	u8 reserved1[7];
-	u8 sal_a_rev_minor;
-	u8 sal_a_rev_major;
-	u8 sal_b_rev_minor;
-	u8 sal_b_rev_major;
-	/* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */
-	u8 oem_id[32];
-	u8 product_id[32];	/* ASCII product id  */
-	u8 reserved2[8];
-};
-
-enum sal_systab_entry_type {
-	SAL_DESC_ENTRY_POINT = 0,
-	SAL_DESC_MEMORY = 1,
-	SAL_DESC_PLATFORM_FEATURE = 2,
-	SAL_DESC_TR = 3,
-	SAL_DESC_PTC = 4,
-	SAL_DESC_AP_WAKEUP = 5
-};
-
-/*
- * Entry type:	Size:
- *	0	48
- *	1	32
- *	2	16
- *	3	32
- *	4	16
- *	5	16
- */
-#define SAL_DESC_SIZE(type)	"\060\040\020\040\020\020"[(unsigned) type]
-
-typedef struct ia64_sal_desc_entry_point {
-	u8 type;
-	u8 reserved1[7];
-	u64 pal_proc;
-	u64 sal_proc;
-	u64 gp;
-	u8 reserved2[16];
-}ia64_sal_desc_entry_point_t;
-
-typedef struct ia64_sal_desc_memory {
-	u8 type;
-	u8 used_by_sal;	/* needs to be mapped for SAL? */
-	u8 mem_attr;		/* current memory attribute setting */
-	u8 access_rights;	/* access rights set up by SAL */
-	u8 mem_attr_mask;	/* mask of supported memory attributes */
-	u8 reserved1;
-	u8 mem_type;		/* memory type */
-	u8 mem_usage;		/* memory usage */
-	u64 addr;		/* physical address of memory */
-	u32 length;	/* length (multiple of 4KB pages) */
-	u32 reserved2;
-	u8 oem_reserved[8];
-} ia64_sal_desc_memory_t;
-
-typedef struct ia64_sal_desc_platform_feature {
-	u8 type;
-	u8 feature_mask;
-	u8 reserved1[14];
-} ia64_sal_desc_platform_feature_t;
-
-typedef struct ia64_sal_desc_tr {
-	u8 type;
-	u8 tr_type;		/* 0 == instruction, 1 == data */
-	u8 regnum;		/* translation register number */
-	u8 reserved1[5];
-	u64 addr;		/* virtual address of area covered */
-	u64 page_size;		/* encoded page size */
-	u8 reserved2[8];
-} ia64_sal_desc_tr_t;
-
-typedef struct ia64_sal_desc_ptc {
-	u8 type;
-	u8 reserved1[3];
-	u32 num_domains;	/* # of coherence domains */
-	u64 domain_info;	/* physical address of domain info table */
-} ia64_sal_desc_ptc_t;
-
-typedef struct ia64_sal_ptc_domain_info {
-	u64 proc_count;		/* number of processors in domain */
-	u64 proc_list;		/* physical address of LID array */
-} ia64_sal_ptc_domain_info_t;
-
-typedef struct ia64_sal_ptc_domain_proc_entry {
-	u64 id  : 8;		/* id of processor */
-	u64 eid : 8;		/* eid of processor */
-} ia64_sal_ptc_domain_proc_entry_t;
-
-
-#define IA64_SAL_AP_EXTERNAL_INT 0
-
-typedef struct ia64_sal_desc_ap_wakeup {
-	u8 type;
-	u8 mechanism;		/* 0 == external interrupt */
-	u8 reserved1[6];
-	u64 vector;		/* interrupt vector in range 0x10-0xff */
-} ia64_sal_desc_ap_wakeup_t ;
-
-extern ia64_sal_handler ia64_sal;
-extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
-
-extern unsigned short sal_revision;	/* supported SAL spec revision */
-extern unsigned short sal_version;	/* SAL version; OEM dependent */
-#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
-
-extern const char *ia64_sal_strerror (long status);
-extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
-
-/* SAL information type encodings */
-enum {
-	SAL_INFO_TYPE_MCA  = 0,		/* Machine check abort information */
-        SAL_INFO_TYPE_INIT = 1,		/* Init information */
-        SAL_INFO_TYPE_CMC  = 2,		/* Corrected machine check information */
-        SAL_INFO_TYPE_CPE  = 3		/* Corrected platform error information */
-};
-
-/* Encodings for machine check parameter types */
-enum {
-	SAL_MC_PARAM_RENDEZ_INT    = 1,	/* Rendezvous interrupt */
-	SAL_MC_PARAM_RENDEZ_WAKEUP = 2,	/* Wakeup */
-	SAL_MC_PARAM_CPE_INT	   = 3	/* Corrected Platform Error Int */
-};
-
-/* Encodings for rendezvous mechanisms */
-enum {
-	SAL_MC_PARAM_MECHANISM_INT = 1,	/* Use interrupt */
-	SAL_MC_PARAM_MECHANISM_MEM = 2	/* Use memory synchronization variable*/
-};
-
-/* Encodings for vectors which can be registered by the OS with SAL */
-enum {
-	SAL_VECTOR_OS_MCA	  = 0,
-	SAL_VECTOR_OS_INIT	  = 1,
-	SAL_VECTOR_OS_BOOT_RENDEZ = 2
-};
-
-/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */
-#define	SAL_MC_PARAM_RZ_ALWAYS		0x1
-#define	SAL_MC_PARAM_BINIT_ESCALATE	0x10
-
-/*
- * Definition of the SAL Error Log from the SAL spec
- */
-
-/* SAL Error Record Section GUID Definitions */
-#define SAL_PROC_DEV_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define SAL_PLAT_BUS_ERR_SECT_GUID  \
-    EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID \
-    EFI_GUID(0x6cb0a200, 0x893a, 0x11da, 0x96, 0xd2, 0x0, 0x10, 0x83, 0xff, \
-		0xca, 0x4d)
-
-#define MAX_CACHE_ERRORS	6
-#define MAX_TLB_ERRORS		6
-#define MAX_BUS_ERRORS		1
-
-/* Definition of version  according to SAL spec for logging purposes */
-typedef struct sal_log_revision {
-	u8 minor;		/* BCD (0..99) */
-	u8 major;		/* BCD (0..99) */
-} sal_log_revision_t;
-
-/* Definition of timestamp according to SAL spec for logging purposes */
-typedef struct sal_log_timestamp {
-	u8 slh_second;		/* Second (0..59) */
-	u8 slh_minute;		/* Minute (0..59) */
-	u8 slh_hour;		/* Hour (0..23) */
-	u8 slh_reserved;
-	u8 slh_day;		/* Day (1..31) */
-	u8 slh_month;		/* Month (1..12) */
-	u8 slh_year;		/* Year (00..99) */
-	u8 slh_century;		/* Century (19, 20, 21, ...) */
-} sal_log_timestamp_t;
-
-/* Definition of log record  header structures */
-typedef struct sal_log_record_header {
-	u64 id;				/* Unique monotonically increasing ID */
-	sal_log_revision_t revision;	/* Major and Minor revision of header */
-	u8 severity;			/* Error Severity */
-	u8 validation_bits;		/* 0: platform_guid, 1: !timestamp */
-	u32 len;			/* Length of this error log in bytes */
-	sal_log_timestamp_t timestamp;	/* Timestamp */
-	efi_guid_t platform_guid;	/* Unique OEM Platform ID */
-} sal_log_record_header_t;
-
-#define sal_log_severity_recoverable	0
-#define sal_log_severity_fatal		1
-#define sal_log_severity_corrected	2
-
-/* Definition of log section header structures */
-typedef struct sal_log_sec_header {
-    efi_guid_t guid;			/* Unique Section ID */
-    sal_log_revision_t revision;	/* Major and Minor revision of Section */
-    u16 reserved;
-    u32 len;				/* Section length */
-} sal_log_section_hdr_t;
-
-typedef struct sal_log_mod_error_info {
-	struct {
-		u64 check_info              : 1,
-		    requestor_identifier    : 1,
-		    responder_identifier    : 1,
-		    target_identifier       : 1,
-		    precise_ip              : 1,
-		    reserved                : 59;
-	} valid;
-	u64 check_info;
-	u64 requestor_identifier;
-	u64 responder_identifier;
-	u64 target_identifier;
-	u64 precise_ip;
-} sal_log_mod_error_info_t;
-
-typedef struct sal_processor_static_info {
-	struct {
-		u64 minstate        : 1,
-		    br              : 1,
-		    cr              : 1,
-		    ar              : 1,
-		    rr              : 1,
-		    fr              : 1,
-		    reserved        : 58;
-	} valid;
-	pal_min_state_area_t min_state_area;
-	u64 br[8];
-	u64 cr[128];
-	u64 ar[128];
-	u64 rr[8];
-	struct ia64_fpreg __attribute__ ((packed)) fr[128];
-} sal_processor_static_info_t;
-
-struct sal_cpuid_info {
-	u64 regs[5];
-	u64 reserved;
-};
-
-typedef struct sal_log_processor_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 proc_error_map      : 1,
-		    proc_state_param    : 1,
-		    proc_cr_lid         : 1,
-		    psi_static_struct   : 1,
-		    num_cache_check     : 4,
-		    num_tlb_check       : 4,
-		    num_bus_check       : 4,
-		    num_reg_file_check  : 4,
-		    num_ms_check        : 4,
-		    cpuid_info          : 1,
-		    reserved1           : 39;
-	} valid;
-	u64 proc_error_map;
-	u64 proc_state_parameter;
-	u64 proc_cr_lid;
-	/*
-	 * The rest of this structure consists of variable-length arrays, which can't be
-	 * expressed in C.
-	 */
-	sal_log_mod_error_info_t info[0];
-	/*
-	 * This is what the rest looked like if C supported variable-length arrays:
-	 *
-	 * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check];
-	 * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check];
-	 * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check];
-	 * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check];
-	 * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check];
-	 * struct sal_cpuid_info cpuid_info;
-	 * sal_processor_static_info_t processor_static_info;
-	 */
-} sal_log_processor_info_t;
-
-/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */
-#define SAL_LPI_PSI_INFO(l)									\
-({	sal_log_processor_info_t *_l = (l);							\
-	((sal_processor_static_info_t *)							\
-	 ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check		\
-				+ _l->valid.num_bus_check + _l->valid.num_reg_file_check	\
-				+ _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t)	\
-			       + sizeof(struct sal_cpuid_info))));				\
-})
-
-/* platform error log structures */
-
-typedef struct sal_log_mem_dev_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 error_status    : 1,
-		    physical_addr   : 1,
-		    addr_mask       : 1,
-		    node            : 1,
-		    card            : 1,
-		    module          : 1,
-		    bank            : 1,
-		    device          : 1,
-		    row             : 1,
-		    column          : 1,
-		    bit_position    : 1,
-		    requestor_id    : 1,
-		    responder_id    : 1,
-		    target_id       : 1,
-		    bus_spec_data   : 1,
-		    oem_id          : 1,
-		    oem_data        : 1,
-		    reserved        : 47;
-	} valid;
-	u64 error_status;
-	u64 physical_addr;
-	u64 addr_mask;
-	u16 node;
-	u16 card;
-	u16 module;
-	u16 bank;
-	u16 device;
-	u16 row;
-	u16 column;
-	u16 bit_position;
-	u64 requestor_id;
-	u64 responder_id;
-	u64 target_id;
-	u64 bus_spec_data;
-	u8 oem_id[16];
-	u8 oem_data[1];			/* Variable length data */
-} sal_log_mem_dev_err_info_t;
-
-typedef struct sal_log_sel_dev_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 record_id       : 1,
-		    record_type     : 1,
-		    generator_id    : 1,
-		    evm_rev         : 1,
-		    sensor_type     : 1,
-		    sensor_num      : 1,
-		    event_dir       : 1,
-		    event_data1     : 1,
-		    event_data2     : 1,
-		    event_data3     : 1,
-		    reserved        : 54;
-	} valid;
-	u16 record_id;
-	u8 record_type;
-	u8 timestamp[4];
-	u16 generator_id;
-	u8 evm_rev;
-	u8 sensor_type;
-	u8 sensor_num;
-	u8 event_dir;
-	u8 event_data1;
-	u8 event_data2;
-	u8 event_data3;
-} sal_log_sel_dev_err_info_t;
-
-typedef struct sal_log_pci_bus_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 err_status      : 1,
-		    err_type        : 1,
-		    bus_id          : 1,
-		    bus_address     : 1,
-		    bus_data        : 1,
-		    bus_cmd         : 1,
-		    requestor_id    : 1,
-		    responder_id    : 1,
-		    target_id       : 1,
-		    oem_data        : 1,
-		    reserved        : 54;
-	} valid;
-	u64 err_status;
-	u16 err_type;
-	u16 bus_id;
-	u32 reserved;
-	u64 bus_address;
-	u64 bus_data;
-	u64 bus_cmd;
-	u64 requestor_id;
-	u64 responder_id;
-	u64 target_id;
-	u8 oem_data[1];			/* Variable length data */
-} sal_log_pci_bus_err_info_t;
-
-typedef struct sal_log_smbios_dev_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 event_type      : 1,
-		    length          : 1,
-		    time_stamp      : 1,
-		    data            : 1,
-		    reserved1       : 60;
-	} valid;
-	u8 event_type;
-	u8 length;
-	u8 time_stamp[6];
-	u8 data[1];			/* data of variable length, length == slsmb_length */
-} sal_log_smbios_dev_err_info_t;
-
-typedef struct sal_log_pci_comp_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 err_status      : 1,
-		    comp_info       : 1,
-		    num_mem_regs    : 1,
-		    num_io_regs     : 1,
-		    reg_data_pairs  : 1,
-		    oem_data        : 1,
-		    reserved        : 58;
-	} valid;
-	u64 err_status;
-	struct {
-		u16 vendor_id;
-		u16 device_id;
-		u8 class_code[3];
-		u8 func_num;
-		u8 dev_num;
-		u8 bus_num;
-		u8 seg_num;
-		u8 reserved[5];
-	} comp_info;
-	u32 num_mem_regs;
-	u32 num_io_regs;
-	u64 reg_data_pairs[1];
-	/*
-	 * array of address/data register pairs is num_mem_regs + num_io_regs elements
-	 * long.  Each array element consists of a u64 address followed by a u64 data
-	 * value.  The oem_data array immediately follows the reg_data_pairs array
-	 */
-	u8 oem_data[1];			/* Variable length data */
-} sal_log_pci_comp_err_info_t;
-
-typedef struct sal_log_plat_specific_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 err_status      : 1,
-		    guid            : 1,
-		    oem_data        : 1,
-		    reserved        : 61;
-	} valid;
-	u64 err_status;
-	efi_guid_t guid;
-	u8 oem_data[1];			/* platform specific variable length data */
-} sal_log_plat_specific_err_info_t;
-
-typedef struct sal_log_host_ctlr_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 err_status      : 1,
-		    requestor_id    : 1,
-		    responder_id    : 1,
-		    target_id       : 1,
-		    bus_spec_data   : 1,
-		    oem_data        : 1,
-		    reserved        : 58;
-	} valid;
-	u64 err_status;
-	u64 requestor_id;
-	u64 responder_id;
-	u64 target_id;
-	u64 bus_spec_data;
-	u8 oem_data[1];			/* Variable length OEM data */
-} sal_log_host_ctlr_err_info_t;
-
-typedef struct sal_log_plat_bus_err_info {
-	sal_log_section_hdr_t header;
-	struct {
-		u64 err_status      : 1,
-		    requestor_id    : 1,
-		    responder_id    : 1,
-		    target_id       : 1,
-		    bus_spec_data   : 1,
-		    oem_data        : 1,
-		    reserved        : 58;
-	} valid;
-	u64 err_status;
-	u64 requestor_id;
-	u64 responder_id;
-	u64 target_id;
-	u64 bus_spec_data;
-	u8 oem_data[1];			/* Variable length OEM data */
-} sal_log_plat_bus_err_info_t;
-
-/* Overall platform error section structure */
-typedef union sal_log_platform_err_info {
-	sal_log_mem_dev_err_info_t mem_dev_err;
-	sal_log_sel_dev_err_info_t sel_dev_err;
-	sal_log_pci_bus_err_info_t pci_bus_err;
-	sal_log_smbios_dev_err_info_t smbios_dev_err;
-	sal_log_pci_comp_err_info_t pci_comp_err;
-	sal_log_plat_specific_err_info_t plat_specific_err;
-	sal_log_host_ctlr_err_info_t host_ctlr_err;
-	sal_log_plat_bus_err_info_t plat_bus_err;
-} sal_log_platform_err_info_t;
-
-/* SAL log over-all, multi-section error record structure (processor+platform) */
-typedef struct err_rec {
-	sal_log_record_header_t sal_elog_header;
-	sal_log_processor_info_t proc_err;
-	sal_log_platform_err_info_t plat_err;
-	u8 oem_data_pad[1024];
-} ia64_err_rec_t;
-
-/*
- * Now define a couple of inline functions for improved type checking
- * and convenience.
- */
-
-extern s64 ia64_sal_cache_flush (u64 cache_type);
-extern void __init check_sal_cache_flush (void);
-
-/* Initialize all the processor and platform level instruction and data caches */
-static inline s64
-ia64_sal_cache_init (void)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0);
-	return isrv.status;
-}
-
-/*
- * Clear the processor and platform information logged by SAL with respect to the machine
- * state at the time of MCA's, INITs, CMCs, or CPEs.
- */
-static inline s64
-ia64_sal_clear_state_info (u64 sal_info_type)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0,
-	              0, 0, 0, 0, 0);
-	return isrv.status;
-}
-
-
-/* Get the processor and platform information logged by SAL with respect to the machine
- * state at the time of the MCAs, INITs, CMCs, or CPEs.
- */
-static inline u64
-ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0,
-	              sal_info, 0, 0, 0, 0);
-	if (isrv.status)
-		return 0;
-
-	return isrv.v0;
-}
-
-/*
- * Get the maximum size of the information logged by SAL with respect to the machine state
- * at the time of MCAs, INITs, CMCs, or CPEs.
- */
-static inline u64
-ia64_sal_get_state_info_size (u64 sal_info_type)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0,
-	              0, 0, 0, 0, 0);
-	if (isrv.status)
-		return 0;
-	return isrv.v0;
-}
-
-/*
- * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from
- * the monarch processor.  Must not lock, because it will not return on any cpu until the
- * monarch processor sends a wake up.
- */
-static inline s64
-ia64_sal_mc_rendez (void)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0);
-	return isrv.status;
-}
-
-/*
- * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during
- * the machine check rendezvous sequence as well as the mechanism to wake up the
- * non-monarch processor at the end of machine check processing.
- * Returns the complete ia64_sal_retval because some calls return more than just a status
- * value.
- */
-static inline struct ia64_sal_retval
-ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val,
-		 timeout, rz_always, 0, 0);
-	return isrv;
-}
-
-/* Read from PCI configuration space */
-static inline s64
-ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0);
-	if (value)
-		*value = isrv.v0;
-	return isrv.status;
-}
-
-/* Write to PCI configuration space */
-static inline s64
-ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value,
-	         type, 0, 0, 0);
-	return isrv.status;
-}
-
-/*
- * Register physical addresses of locations needed by SAL when SAL procedures are invoked
- * in virtual mode.
- */
-static inline s64
-ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr,
-	         0, 0, 0, 0, 0);
-	return isrv.status;
-}
-
-/*
- * Register software dependent code locations within SAL. These locations are handlers or
- * entry points where SAL will pass control for the specified event. These event handlers
- * are for the bott rendezvous, MCAs and INIT scenarios.
- */
-static inline s64
-ia64_sal_set_vectors (u64 vector_type,
-		      u64 handler_addr1, u64 gp1, u64 handler_len1,
-		      u64 handler_addr2, u64 gp2, u64 handler_len2)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_SET_VECTORS, vector_type,
-			handler_addr1, gp1, handler_len1,
-			handler_addr2, gp2, handler_len2);
-
-	return isrv.status;
-}
-
-/* Update the contents of PAL block in the non-volatile storage device */
-static inline s64
-ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size,
-		     u64 *error_code, u64 *scratch_buf_size_needed)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size,
-	         0, 0, 0, 0);
-	if (error_code)
-		*error_code = isrv.v0;
-	if (scratch_buf_size_needed)
-		*scratch_buf_size_needed = isrv.v1;
-	return isrv.status;
-}
-
-/* Get physical processor die mapping in the platform. */
-static inline s64
-ia64_sal_physical_id_info(u16 *splid)
-{
-	struct ia64_sal_retval isrv;
-
-	if (sal_revision < SAL_VERSION_CODE(3,2))
-		return -1;
-
-	SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0);
-	if (splid)
-		*splid = isrv.v0;
-	return isrv.status;
-}
-
-extern unsigned long sal_platform_features;
-
-extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *);
-
-struct sal_ret_values {
-	long r8; long r9; long r10; long r11;
-};
-
-#define IA64_SAL_OEMFUNC_MIN		0x02000000
-#define IA64_SAL_OEMFUNC_MAX		0x03ffffff
-
-extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64,
-			    u64, u64, u64);
-extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64,
-				   u64, u64, u64, u64, u64);
-extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64,
-				      u64, u64, u64, u64, u64);
-extern long
-ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
-		    unsigned long *drift_info);
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * System Abstraction Layer Specification
- * Section 3.2.5.1: OS_BOOT_RENDEZ to SAL return State.
- * Note: region regs are stored first in head.S _start. Hence they must
- * stay up front.
- */
-struct sal_to_os_boot {
-	u64 rr[8];		/* Region Registers */
-	u64 br[6];		/* br0:
-				 * return addr into SAL boot rendez routine */
-	u64 gr1;		/* SAL:GP */
-	u64 gr12;		/* SAL:SP */
-	u64 gr13;		/* SAL: Task Pointer */
-	u64 fpsr;
-	u64 pfs;
-	u64 rnat;
-	u64 unat;
-	u64 bspstore;
-	u64 dcr;		/* Default Control Register */
-	u64 iva;
-	u64 pta;
-	u64 itv;
-	u64 pmv;
-	u64 cmcv;
-	u64 lrr[2];
-	u64 gr[4];
-	u64 pr;			/* Predicate registers */
-	u64 lc;			/* Loop Count */
-	struct ia64_fpreg fp[20];
-};
-
-/*
- * Global array allocated for NR_CPUS at boot time
- */
-extern struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS];
-
-extern void ia64_jump_to_sal(struct sal_to_os_boot *);
-#endif
-
-extern void ia64_sal_handler_init(void *entry_point, void *gpval);
-
-#define PALO_MAX_TLB_PURGES	0xFFFF
-#define PALO_SIG	"PALO"
-
-struct palo_table {
-	u8  signature[4];	/* Should be "PALO" */
-	u32 length;
-	u8  minor_revision;
-	u8  major_revision;
-	u8  checksum;
-	u8  reserved1[5];
-	u16 max_tlb_purges;
-	u8  reserved2[6];
-};
-
-#define NPTCG_FROM_PAL			0
-#define NPTCG_FROM_PALO			1
-#define NPTCG_FROM_KERNEL_PARAMETER	2
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_IA64_SAL_H */
diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h
deleted file mode 100644
index d6f57874041d..000000000000
--- a/include/asm-ia64/scatterlist.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_IA64_SCATTERLIST_H
-#define _ASM_IA64_SCATTERLIST_H
-
-/*
- * Modified 1998-1999, 2001-2002, 2004
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	unsigned int length;	/* buffer length */
-
-	dma_addr_t dma_address;
-	unsigned int dma_length;
-};
-
-/*
- * It used to be that ISA_DMA_THRESHOLD had something to do with the
- * DMA-limits of ISA-devices.  Nowadays, its only remaining use (apart
- * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
- * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
- * address of a page is that is allocated with GFP_DMA.  On IA-64,
- * that's 4GB - 1.
- */
-#define ISA_DMA_THRESHOLD	0xffffffff
-
-#define sg_dma_len(sg)		((sg)->dma_length)
-#define sg_dma_address(sg)	((sg)->dma_address)
-
-#define	ARCH_HAS_SG_CHAIN
-
-#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
deleted file mode 100644
index 7286e4a9fe84..000000000000
--- a/include/asm-ia64/sections.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_IA64_SECTIONS_H
-#define _ASM_IA64_SECTIONS_H
-
-/*
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <asm-generic/sections.h>
-
-extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
-extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
-extern char __start___rse_patchlist[], __end___rse_patchlist[];
-extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
-extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
-extern char __start_gate_section[];
-extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[];
-extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[];
-extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[];
-extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[];
-extern char __start_unwind[], __end_unwind[];
-extern char __start_ivt_text[], __end_ivt_text[];
-
-#endif /* _ASM_IA64_SECTIONS_H */
-
diff --git a/include/asm-ia64/segment.h b/include/asm-ia64/segment.h
deleted file mode 100644
index b89e2b3d648f..000000000000
--- a/include/asm-ia64/segment.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_IA64_SEGMENT_H
-#define _ASM_IA64_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif /* _ASM_IA64_SEGMENT_H */
diff --git a/include/asm-ia64/semaphore.h b/include/asm-ia64/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-ia64/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-ia64/sembuf.h b/include/asm-ia64/sembuf.h
deleted file mode 100644
index 1340fbc04d3e..000000000000
--- a/include/asm-ia64/sembuf.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_IA64_SEMBUF_H
-#define _ASM_IA64_SEMBUF_H
-
-/*
- * The semid64_ds structure for IA-64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _ASM_IA64_SEMBUF_H */
diff --git a/include/asm-ia64/serial.h b/include/asm-ia64/serial.h
deleted file mode 100644
index 0c7a2f3dcf13..000000000000
--- a/include/asm-ia64/serial.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-ia64/serial.h
- *
- * Derived from the i386 version.
- */
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-/*
- * All legacy serial ports should be enumerated via ACPI namespace, so
- * we need not list them here.
- */
diff --git a/include/asm-ia64/setup.h b/include/asm-ia64/setup.h
deleted file mode 100644
index 4399a44355b3..000000000000
--- a/include/asm-ia64/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __IA64_SETUP_H
-#define __IA64_SETUP_H
-
-#define COMMAND_LINE_SIZE	2048
-
-#endif
diff --git a/include/asm-ia64/shmbuf.h b/include/asm-ia64/shmbuf.h
deleted file mode 100644
index 585002a77acd..000000000000
--- a/include/asm-ia64/shmbuf.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_IA64_SHMBUF_H
-#define _ASM_IA64_SHMBUF_H
-
-/*
- * The shmid64_ds structure for IA-64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	__kernel_time_t		shm_ctime;	/* last change time */
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASM_IA64_SHMBUF_H */
diff --git a/include/asm-ia64/shmparam.h b/include/asm-ia64/shmparam.h
deleted file mode 100644
index d07508dc54ae..000000000000
--- a/include/asm-ia64/shmparam.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_IA64_SHMPARAM_H
-#define _ASM_IA64_SHMPARAM_H
-
-/*
- * SHMLBA controls minimum alignment at which shared memory segments
- * get attached.  The IA-64 architecture says that there may be a
- * performance degradation when there are virtual aliases within 1MB.
- * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20
- */
-#define	SHMLBA	(1024*1024)
-
-#endif /* _ASM_IA64_SHMPARAM_H */
diff --git a/include/asm-ia64/sigcontext.h b/include/asm-ia64/sigcontext.h
deleted file mode 100644
index 57ff777bcc40..000000000000
--- a/include/asm-ia64/sigcontext.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _ASM_IA64_SIGCONTEXT_H
-#define _ASM_IA64_SIGCONTEXT_H
-
-/*
- * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co
- * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <asm/fpu.h>
-
-#define IA64_SC_FLAG_ONSTACK_BIT		0	/* is handler running on signal stack? */
-#define IA64_SC_FLAG_IN_SYSCALL_BIT		1	/* did signal interrupt a syscall? */
-#define IA64_SC_FLAG_FPH_VALID_BIT		2	/* is state in f[32]-f[127] valid? */
-
-#define IA64_SC_FLAG_ONSTACK		(1 << IA64_SC_FLAG_ONSTACK_BIT)
-#define IA64_SC_FLAG_IN_SYSCALL		(1 << IA64_SC_FLAG_IN_SYSCALL_BIT)
-#define IA64_SC_FLAG_FPH_VALID		(1 << IA64_SC_FLAG_FPH_VALID_BIT)
-
-# ifndef __ASSEMBLY__
-
-/*
- * Note on handling of register backing store: sc_ar_bsp contains the address that would
- * be found in ar.bsp after executing a "cover" instruction the context in which the
- * signal was raised.  If signal delivery required switching to an alternate signal stack
- * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the
- * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the
- * original one.  In this case, sc_rbs_base contains the base address of the new register
- * backing store.  The number of registers in the dirty partition can be calculated as:
- *
- *   ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16))
- *
- */
-
-struct sigcontext {
-	unsigned long		sc_flags;	/* see manifest constants above */
-	unsigned long		sc_nat;		/* bit i == 1 iff scratch reg gr[i] is a NaT */
-	stack_t			sc_stack;	/* previously active stack */
-
-	unsigned long		sc_ip;		/* instruction pointer */
-	unsigned long		sc_cfm;		/* current frame marker */
-	unsigned long		sc_um;		/* user mask bits */
-	unsigned long		sc_ar_rsc;	/* register stack configuration register */
-	unsigned long		sc_ar_bsp;	/* backing store pointer */
-	unsigned long		sc_ar_rnat;	/* RSE NaT collection register */
-	unsigned long		sc_ar_ccv;	/* compare and exchange compare value register */
-	unsigned long		sc_ar_unat;	/* ar.unat of interrupted context */
-	unsigned long		sc_ar_fpsr;	/* floating-point status register */
-	unsigned long		sc_ar_pfs;	/* previous function state */
-	unsigned long		sc_ar_lc;	/* loop count register */
-	unsigned long		sc_pr;		/* predicate registers */
-	unsigned long		sc_br[8];	/* branch registers */
-	/* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */
-	unsigned long		sc_gr[32];	/* general registers (static partition) */
-	struct ia64_fpreg	sc_fr[128];	/* floating-point registers */
-
-	unsigned long		sc_rbs_base;	/* NULL or new base of sighandler's rbs */
-	unsigned long		sc_loadrs;	/* see description above */
-
-	unsigned long		sc_ar25;	/* cmp8xchg16 uses this */
-	unsigned long		sc_ar26;	/* rsvd for scratch use */
-	unsigned long		sc_rsvd[12];	/* reserved for future use */
-	/*
-	 * The mask must come last so we can increase _NSIG_WORDS
-	 * without breaking binary compatibility.
-	 */
-	sigset_t		sc_mask;	/* signal mask to restore after handler returns */
-};
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_IA64_SIGCONTEXT_H */
diff --git a/include/asm-ia64/siginfo.h b/include/asm-ia64/siginfo.h
deleted file mode 100644
index 9294e4b0c8bc..000000000000
--- a/include/asm-ia64/siginfo.h
+++ /dev/null
@@ -1,139 +0,0 @@
-#ifndef _ASM_IA64_SIGINFO_H
-#define _ASM_IA64_SIGINFO_H
-
-/*
- * Based on <asm-i386/siginfo.h>.
- *
- * Modified 1998-2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
-
-#define HAVE_ARCH_SIGINFO_T
-#define HAVE_ARCH_COPY_SIGINFO
-#define HAVE_ARCH_COPY_SIGINFO_TO_USER
-
-#include <asm-generic/siginfo.h>
-
-typedef struct siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-	int __pad0;
-
-	union {
-		int _pad[SI_PAD_SIZE];
-
-		/* kill() */
-		struct {
-			pid_t _pid;		/* sender's pid */
-			uid_t _uid;		/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
-			sigval_t _sigval;	/* must overlay ._rt._sigval! */
-			int _sys_private;	/* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			pid_t _pid;		/* sender's pid */
-			uid_t _uid;		/* sender's uid */
-			sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			pid_t _pid;		/* which child */
-			uid_t _uid;		/* sender's uid */
-			int _status;		/* exit code */
-			clock_t _utime;
-			clock_t _stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			void __user *_addr;	/* faulting insn/memory ref. */
-			int _imm;		/* immediate value for "break" */
-			unsigned int _flags;	/* see below */
-			unsigned long _isr;	/* isr */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			long _band;	/* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-} siginfo_t;
-
-#define si_imm		_sifields._sigfault._imm	/* as per UNIX SysV ABI spec */
-#define si_flags	_sifields._sigfault._flags
-/*
- * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
- * si_code is non-zero and __ISR_VALID is set in si_flags.
- */
-#define si_isr		_sifields._sigfault._isr
-
-/*
- * Flag values for si_flags:
- */
-#define __ISR_VALID_BIT	0
-#define __ISR_VALID	(1 << __ISR_VALID_BIT)
-
-/*
- * SIGILL si_codes
- */
-#define ILL_BADIADDR	(__SI_FAULT|9)	/* unimplemented instruction address */
-#define __ILL_BREAK	(__SI_FAULT|10)	/* illegal break */
-#define __ILL_BNDMOD	(__SI_FAULT|11)	/* bundle-update (modification) in progress */
-#undef NSIGILL
-#define NSIGILL		11
-
-/*
- * SIGFPE si_codes
- */
-#define __FPE_DECOVF	(__SI_FAULT|9)	/* decimal overflow */
-#define __FPE_DECDIV	(__SI_FAULT|10)	/* decimal division by zero */
-#define __FPE_DECERR	(__SI_FAULT|11)	/* packed decimal error */
-#define __FPE_INVASC	(__SI_FAULT|12)	/* invalid ASCII digit */
-#define __FPE_INVDEC	(__SI_FAULT|13)	/* invalid decimal digit */
-#undef NSIGFPE
-#define NSIGFPE		13
-
-/*
- * SIGSEGV si_codes
- */
-#define __SEGV_PSTKOVF	(__SI_FAULT|3)	/* paragraph stack overflow */
-#undef NSIGSEGV
-#define NSIGSEGV	3
-
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
-#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
-#undef NSIGTRAP
-#define NSIGTRAP	4
-
-#ifdef __KERNEL__
-#include <linux/string.h>
-
-static inline void
-copy_siginfo (siginfo_t *to, siginfo_t *from)
-{
-	if (from->si_code < 0)
-		memcpy(to, from, sizeof(siginfo_t));
-	else
-		/* _sigchld is currently the largest know union member */
-		memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IA64_SIGINFO_H */
diff --git a/include/asm-ia64/signal.h b/include/asm-ia64/signal.h
deleted file mode 100644
index 4f5ca5643cb1..000000000000
--- a/include/asm-ia64/signal.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _ASM_IA64_SIGNAL_H
-#define _ASM_IA64_SIGNAL_H
-
-/*
- * Modified 1998-2001, 2003
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- *
- * Unfortunately, this file is being included by bits/signal.h in
- * glibc-2.x.  Hence the #ifdef __KERNEL__ ugliness.
- */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-/*
- * The minimum stack size needs to be fairly large because we want to
- * be sure that an app compiled for today's CPUs will continue to run
- * on all future CPU models.  The CPU model matters because the signal
- * frame needs to have space for the complete machine state, including
- * all physical stacked registers.  The number of physical stacked
- * registers is CPU model dependent, but given that the width of
- * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
- * more than 16KB of space.
- */
-#if 1
-  /*
-   * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
-   * in wrong. ;-(  To preserve backwards compatibility, we leave the kernel at the
-   * incorrect value and fix libc only.
-   */
-# define MINSIGSTKSZ	131027	/* min. stack size for sigaltstack() */
-#else
-# define MINSIGSTKSZ	131072	/* min. stack size for sigaltstack() */
-#endif
-#define SIGSTKSZ	262144	/* default stack size for sigaltstack() */
-
-#ifdef __KERNEL__
-
-#define _NSIG		64
-#define _NSIG_BPW	64
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/signal.h>
-
-# ifndef __ASSEMBLY__
-
-#  include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-typedef unsigned long old_sigset_t;
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#  include <asm/sigcontext.h>
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-# endif /* !__ASSEMBLY__ */
-#endif /* _ASM_IA64_SIGNAL_H */
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
deleted file mode 100644
index 27731e032ee9..000000000000
--- a/include/asm-ia64/smp.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * SMP Support
- *
- * Copyright (C) 1999 VA Linux Systems
- * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P.
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Bjorn Helgaas <bjorn.helgaas@hp.com>
- */
-#ifndef _ASM_IA64_SMP_H
-#define _ASM_IA64_SMP_H
-
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/kernel.h>
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/param.h>
-#include <asm/processor.h>
-#include <asm/ptrace.h>
-
-static inline unsigned int
-ia64_get_lid (void)
-{
-	union {
-		struct {
-			unsigned long reserved : 16;
-			unsigned long eid : 8;
-			unsigned long id : 8;
-			unsigned long ignored : 32;
-		} f;
-		unsigned long bits;
-	} lid;
-
-	lid.bits = ia64_getreg(_IA64_REG_CR_LID);
-	return lid.f.id << 8 | lid.f.eid;
-}
-
-#define hard_smp_processor_id()		ia64_get_lid()
-
-#ifdef CONFIG_SMP
-
-#define XTP_OFFSET		0x1e0008
-
-#define SMP_IRQ_REDIRECTION	(1 << 0)
-#define SMP_IPI_REDIRECTION	(1 << 1)
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-extern struct smp_boot_data {
-	int cpu_count;
-	int cpu_phys_id[NR_CPUS];
-} smp_boot_data __initdata;
-
-extern char no_int_routing __devinitdata;
-
-extern cpumask_t cpu_online_map;
-extern cpumask_t cpu_core_map[NR_CPUS];
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-extern int smp_num_siblings;
-extern void __iomem *ipi_base_addr;
-extern unsigned char smp_int_redirect;
-
-extern volatile int ia64_cpu_to_sapicid[];
-#define cpu_physical_id(i)	ia64_cpu_to_sapicid[i]
-
-extern unsigned long ap_wakeup_vector;
-
-/*
- * Function to map hard smp processor id to logical id.  Slow, so don't use this in
- * performance-critical code.
- */
-static inline int
-cpu_logical_id (int cpuid)
-{
-	int i;
-
-	for (i = 0; i < NR_CPUS; ++i)
-		if (cpu_physical_id(i) == cpuid)
-			break;
-	return i;
-}
-
-/*
- * XTP control functions:
- *	min_xtp   : route all interrupts to this CPU
- *	normal_xtp: nominal XTP value
- *	max_xtp   : never deliver interrupts to this CPU.
- */
-
-static inline void
-min_xtp (void)
-{
-	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
-		writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */
-}
-
-static inline void
-normal_xtp (void)
-{
-	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
-		writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */
-}
-
-static inline void
-max_xtp (void)
-{
-	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
-		writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */
-}
-
-/* Upping and downing of CPUs */
-extern int __cpu_disable (void);
-extern void __cpu_die (unsigned int cpu);
-extern void cpu_die (void) __attribute__ ((noreturn));
-extern void __init smp_build_cpu_map(void);
-
-extern void __init init_smp_config (void);
-extern void smp_do_timer (struct pt_regs *regs);
-
-extern void smp_send_reschedule (int cpu);
-extern void identify_siblings (struct cpuinfo_ia64 *);
-extern int is_multithreading_enabled(void);
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-#else /* CONFIG_SMP */
-
-#define cpu_logical_id(i)		0
-#define cpu_physical_id(i)		ia64_get_lid()
-
-#endif /* CONFIG_SMP */
-#endif /* _ASM_IA64_SMP_H */
diff --git a/include/asm-ia64/sn/acpi.h b/include/asm-ia64/sn/acpi.h
deleted file mode 100644
index 9ce2801cbd57..000000000000
--- a/include/asm-ia64/sn/acpi.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_ACPI_H
-#define _ASM_IA64_SN_ACPI_H
-
-#include "acpi/acglobal.h"
-
-extern int sn_acpi_rev;
-#define SN_ACPI_BASE_SUPPORT()   (sn_acpi_rev >= 0x20101)
-
-#endif /* _ASM_IA64_SN_ACPI_H */
diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h
deleted file mode 100644
index e715c794b186..000000000000
--- a/include/asm-ia64/sn/addrs.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_ADDRS_H
-#define _ASM_IA64_SN_ADDRS_H
-
-#include <asm/percpu.h>
-#include <asm/sn/types.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/pda.h>
-
-/*
- *  Memory/SHUB Address Format:
- *  +-+---------+--+--------------+
- *  |0|  NASID  |AS| NodeOffset   |
- *  +-+---------+--+--------------+
- *
- *  NASID: (low NASID bit is 0) Memory and SHUB MMRs
- *   AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
- *     00: Local Resources and MMR space
- *           Top bit of NodeOffset
- *               0: Local resources space
- *                  node id:
- *                        0: IA64/NT compatibility space
- *                        2: Local MMR Space
- *                        4: Local memory, regardless of local node id
- *               1: Global MMR space
- *     01: GET space.
- *     10: AMO space.
- *     11: Cacheable memory space.
- *
- *   NodeOffset: byte offset
- *
- *
- *  TIO address format:
- *  +-+----------+--+--------------+
- *  |0|  NASID   |AS| Nodeoffset   |
- *  +-+----------+--+--------------+
- *
- *  NASID: (low NASID bit is 1) TIO
- *   AS: 2-bit Chiplet Identifier
- *     00: TIO LB (Indicates TIO MMR access.)
- *     01: TIO ICE (indicates coretalk space access.)
- * 
- *   NodeOffset: top bit must be set.
- *
- *
- * Note that in both of the above address formats, the low
- * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
- */
-
-
-/*
- * Define basic shift & mask constants for manipulating NASIDs and AS values.
- */
-#define NASID_BITMASK		(sn_hub_info->nasid_bitmask)
-#define NASID_SHIFT		(sn_hub_info->nasid_shift)
-#define AS_SHIFT		(sn_hub_info->as_shift)
-#define AS_BITMASK		0x3UL
-
-#define NASID_MASK              ((u64)NASID_BITMASK << NASID_SHIFT)
-#define AS_MASK			((u64)AS_BITMASK << AS_SHIFT)
-
-
-/*
- * AS values. These are the same on both SHUB1 & SHUB2.
- */
-#define AS_GET_VAL		1UL
-#define AS_AMO_VAL		2UL
-#define AS_CAC_VAL		3UL
-#define AS_GET_SPACE		(AS_GET_VAL << AS_SHIFT)
-#define AS_AMO_SPACE		(AS_AMO_VAL << AS_SHIFT)
-#define AS_CAC_SPACE		(AS_CAC_VAL << AS_SHIFT)
-
-
-/* 
- * Virtual Mode Local & Global MMR space.  
- */
-#define SH1_LOCAL_MMR_OFFSET	0x8000000000UL
-#define SH2_LOCAL_MMR_OFFSET	0x0200000000UL
-#define LOCAL_MMR_OFFSET	(is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
-#define LOCAL_MMR_SPACE		(__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET)
-#define LOCAL_PHYS_MMR_SPACE	(RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET)
-
-#define SH1_GLOBAL_MMR_OFFSET	0x0800000000UL
-#define SH2_GLOBAL_MMR_OFFSET	0x0300000000UL
-#define GLOBAL_MMR_OFFSET	(is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
-#define GLOBAL_MMR_SPACE	(__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET)
-
-/*
- * Physical mode addresses
- */
-#define GLOBAL_PHYS_MMR_SPACE	(RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET)
-
-
-/*
- * Clear region & AS bits.
- */
-#define TO_PHYS_MASK		(~(RGN_BITS | AS_MASK))
-
-
-/*
- * Misc NASID manipulation.
- */
-#define NASID_SPACE(n)		((u64)(n) << NASID_SHIFT)
-#define REMOTE_ADDR(n,a)	(NASID_SPACE(n) | (a))
-#define NODE_OFFSET(x)		((x) & (NODE_ADDRSPACE_SIZE - 1))
-#define NODE_ADDRSPACE_SIZE     (1UL << AS_SHIFT)
-#define NASID_GET(x)		(int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
-#define LOCAL_MMR_ADDR(a)	(LOCAL_MMR_SPACE | (a))
-#define GLOBAL_MMR_ADDR(n,a)	(GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
-#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
-#define GLOBAL_CAC_ADDR(n,a)	(CAC_BASE | REMOTE_ADDR(n,a))
-#define CHANGE_NASID(n,x)	((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
-#define IS_TIO_NASID(n)		((n) & 1)
-
-
-/* non-II mmr's start at top of big window space (4G) */
-#define BWIN_TOP		0x0000000100000000UL
-
-/*
- * general address defines
- */
-#define CAC_BASE		(PAGE_OFFSET | AS_CAC_SPACE)
-#define AMO_BASE		(__IA64_UNCACHED_OFFSET | AS_AMO_SPACE)
-#define AMO_PHYS_BASE		(RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE)
-#define GET_BASE		(PAGE_OFFSET | AS_GET_SPACE)
-
-/*
- * Convert Memory addresses between various addressing modes.
- */
-#define TO_PHYS(x)		(TO_PHYS_MASK & (x))
-#define TO_CAC(x)		(CAC_BASE     | TO_PHYS(x))
-#ifdef CONFIG_SGI_SN
-#define TO_AMO(x)		(AMO_BASE     | TO_PHYS(x))
-#define TO_GET(x)		(GET_BASE     | TO_PHYS(x))
-#else
-#define TO_AMO(x)		({ BUG(); x; })
-#define TO_GET(x)		({ BUG(); x; })
-#endif
-
-/*
- * Covert from processor physical address to II/TIO physical address:
- *	II - squeeze out the AS bits
- *	TIO- requires a chiplet id in bits 38-39.  For DMA to memory,
- *           the chiplet id is zero.  If we implement TIO-TIO dma, we might need
- *           to insert a chiplet id into this macro.  However, it is our belief
- *           right now that this chiplet id will be ICE, which is also zero.
- */
-#define SH1_TIO_PHYS_TO_DMA(x) 						\
-	((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x))
-
-#define SH2_NETWORK_BANK_OFFSET(x) 					\
-        ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1))
-
-#define SH2_NETWORK_BANK_SELECT(x) 					\
-        ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4)))	\
-        	>> (sn_hub_info->nasid_shift - 4)) << 36)
-
-#define SH2_NETWORK_ADDRESS(x) 						\
-	(SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x))
-
-#define SH2_TIO_PHYS_TO_DMA(x) 						\
-        (((u64)(NASID_GET(x)) << 40) | 	SH2_NETWORK_ADDRESS(x))
-
-#define PHYS_TO_TIODMA(x)						\
-	(is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x))
-
-#define PHYS_TO_DMA(x)							\
-	((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
-
-
-/*
- * Macros to test for address type.
- */
-#define IS_AMO_ADDRESS(x)	(((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE)
-#define IS_AMO_PHYS_ADDRESS(x)	(((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE)
-
-
-/*
- * The following definitions pertain to the IO special address
- * space.  They define the location of the big and little windows
- * of any given node.
- */
-#define BWIN_SIZE_BITS			29	/* big window size: 512M */
-#define TIO_BWIN_SIZE_BITS		30	/* big window size: 1G */
-#define NODE_SWIN_BASE(n, w)		((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
-		: RAW_NODE_SWIN_BASE(n, w))
-#define TIO_SWIN_BASE(n, w) 		(TIO_IO_BASE(n) + \
-					    ((u64) (w) << TIO_SWIN_SIZE_BITS))
-#define NODE_IO_BASE(n)			(GLOBAL_MMR_SPACE | NASID_SPACE(n))
-#define TIO_IO_BASE(n)                  (__IA64_UNCACHED_OFFSET | NASID_SPACE(n))
-#define BWIN_SIZE			(1UL << BWIN_SIZE_BITS)
-#define NODE_BWIN_BASE0(n)		(NODE_IO_BASE(n) + BWIN_SIZE)
-#define NODE_BWIN_BASE(n, w)		(NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
-#define RAW_NODE_SWIN_BASE(n, w)	(NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
-#define BWIN_WIDGET_MASK		0x7
-#define BWIN_WINDOWNUM(x)		(((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
-#define SH1_IS_BIG_WINDOW_ADDR(x)	((x) & BWIN_TOP)
-
-#define TIO_BWIN_WINDOW_SELECT_MASK	0x7
-#define TIO_BWIN_WINDOWNUM(x)		(((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
-
-#define TIO_HWIN_SHIFT_BITS		33
-#define TIO_HWIN(x)			(NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS)
-
-/*
- * The following definitions pertain to the IO special address
- * space.  They define the location of the big and little windows
- * of any given node.
- */
-
-#define SWIN_SIZE_BITS			24
-#define	SWIN_WIDGET_MASK		0xF
-
-#define TIO_SWIN_SIZE_BITS		28
-#define TIO_SWIN_SIZE			(1UL << TIO_SWIN_SIZE_BITS)
-#define TIO_SWIN_WIDGET_MASK		0x3
-
-/*
- * Convert smallwindow address to xtalk address.
- *
- * 'addr' can be physical or virtual address, but will be converted
- * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
- */
-#define	SWIN_WIDGETNUM(x)		(((x)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
-#define TIO_SWIN_WIDGETNUM(x)		(((x)  >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
-
-
-/*
- * The following macros produce the correct base virtual address for
- * the hub registers. The REMOTE_HUB_* macro produce
- * the address for the specified hub's registers.  The intent is
- * that the appropriate PI, MD, NI, or II register would be substituted
- * for x.
- *
- *   WARNING:
- *	When certain Hub chip workaround are defined, it's not sufficient
- *	to dereference the *_HUB_ADDR() macros.  You should instead use
- *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
- *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
- *	They're always safe.
- */
-/* Shub1 TIO & MMR addressing macros */
-#define SH1_TIO_IOSPACE_ADDR(n,x)					\
-	GLOBAL_MMR_ADDR(n,x)
-
-#define SH1_REMOTE_BWIN_MMR(n,x)					\
-	GLOBAL_MMR_ADDR(n,x)
-
-#define SH1_REMOTE_SWIN_MMR(n,x)					\
-	(NODE_SWIN_BASE(n,1) + 0x800000UL + (x))
-
-#define SH1_REMOTE_MMR(n,x)						\
-	(SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) :		\
-	 	SH1_REMOTE_SWIN_MMR(n,x))
-
-/* Shub1 TIO & MMR addressing macros */
-#define SH2_TIO_IOSPACE_ADDR(n,x)					\
-	((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2)))
-
-#define SH2_REMOTE_MMR(n,x)						\
-	GLOBAL_MMR_ADDR(n,x)
-
-
-/* TIO & MMR addressing macros that work on both shub1 & shub2 */
-#define TIO_IOSPACE_ADDR(n,x)						\
-	((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) :		\
-		 SH2_TIO_IOSPACE_ADDR(n,x)))
-
-#define SH_REMOTE_MMR(n,x)						\
-	(is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x))
-
-#define REMOTE_HUB_ADDR(n,x)						\
-	(IS_TIO_NASID(n) ?  ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) :	\
-	 ((volatile u64*)SH_REMOTE_MMR(n,x)))
-
-
-#define HUB_L(x)			(*((volatile typeof(*x) *)x))
-#define	HUB_S(x,d)			(*((volatile typeof(*x) *)x) = (d))
-
-#define REMOTE_HUB_L(n, a)		HUB_L(REMOTE_HUB_ADDR((n), (a)))
-#define REMOTE_HUB_S(n, a, d)		HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
-
-/*
- * Coretalk address breakdown
- */
-#define CTALK_NASID_SHFT		40
-#define CTALK_NASID_MASK		(0x3FFFULL << CTALK_NASID_SHFT)
-#define CTALK_CID_SHFT			38
-#define CTALK_CID_MASK			(0x3ULL << CTALK_CID_SHFT)
-#define CTALK_NODE_OFFSET		0x3FFFFFFFFF
-
-#endif /* _ASM_IA64_SN_ADDRS_H */
diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h
deleted file mode 100644
index 7caa1f44cd95..000000000000
--- a/include/asm-ia64/sn/arch.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI specific setup.
- *
- * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc.  All rights reserved.
- * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
- */
-#ifndef _ASM_IA64_SN_ARCH_H
-#define _ASM_IA64_SN_ARCH_H
-
-#include <linux/numa.h>
-#include <asm/types.h>
-#include <asm/percpu.h>
-#include <asm/sn/types.h>
-#include <asm/sn/sn_cpuid.h>
-
-/*
- * This is the maximum number of NUMALINK nodes that can be part of a single
- * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
- * remote partitions are NOT included in this number.
- * The number of compact nodes cannot exceed size of a coherency domain.
- * The purpose of this define is to specify a node count that includes
- * all C/M/TIO nodes in an SSI system.
- *
- * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
- *
- * 	Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
- * 	to ACPI3.0, this limit will be removed. The notion of "compact nodes"
- * 	should be deleted and TIOs should be included in MAX_NUMNODES.
- */
-#define MAX_TIO_NODES		MAX_NUMNODES
-#define MAX_COMPACT_NODES	(MAX_NUMNODES + MAX_TIO_NODES)
-
-/*
- * Maximum number of nodes in all partitions and in all coherency domains.
- * This is the total number of nodes accessible in the numalink fabric. It
- * includes all C & M bricks, plus all TIOs.
- *
- * This value is also the value of the maximum number of NASIDs in the numalink
- * fabric.
- */
-#define MAX_NUMALINK_NODES	16384
-
-/*
- * The following defines attributes of the HUB chip. These attributes are
- * frequently referenced. They are kept in the per-cpu data areas of each cpu.
- * They are kept together in a struct to minimize cache misses.
- */
-struct sn_hub_info_s {
-	u8 shub2;
-	u8 nasid_shift;
-	u8 as_shift;
-	u8 shub_1_1_found;
-	u16 nasid_bitmask;
-};
-DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
-#define sn_hub_info 	(&__get_cpu_var(__sn_hub_info))
-#define is_shub2()	(sn_hub_info->shub2)
-#define is_shub1()	(sn_hub_info->shub2 == 0)
-
-/*
- * Use this macro to test if shub 1.1 wars should be enabled
- */
-#define enable_shub_wars_1_1()	(sn_hub_info->shub_1_1_found)
-
-
-/*
- * Compact node ID to nasid mappings kept in the per-cpu data areas of each
- * cpu.
- */
-DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
-#define sn_cnodeid_to_nasid	(&__get_cpu_var(__sn_cnodeid_to_nasid[0]))
-
-
-extern u8 sn_partition_id;
-extern u8 sn_system_size;
-extern u8 sn_sharing_domain_size;
-extern u8 sn_region_size;
-
-extern void sn_flush_all_caches(long addr, long bytes);
-extern bool sn_cpu_disable_allowed(int cpu);
-
-#endif /* _ASM_IA64_SN_ARCH_H */
diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h
deleted file mode 100644
index a0d214f43115..000000000000
--- a/include/asm-ia64/sn/bte.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
- */
-
-
-#ifndef _ASM_IA64_SN_BTE_H
-#define _ASM_IA64_SN_BTE_H
-
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/types.h>
-#include <asm/sn/shub_mmr.h>
-
-#define IBCT_NOTIFY             (0x1UL << 4)
-#define IBCT_ZFIL_MODE          (0x1UL << 0)
-
-/* #define BTE_DEBUG */
-/* #define BTE_DEBUG_VERBOSE */
-
-#ifdef BTE_DEBUG
-#  define BTE_PRINTK(x) printk x	/* Terse */
-#  ifdef BTE_DEBUG_VERBOSE
-#    define BTE_PRINTKV(x) printk x	/* Verbose */
-#  else
-#    define BTE_PRINTKV(x)
-#  endif /* BTE_DEBUG_VERBOSE */
-#else
-#  define BTE_PRINTK(x)
-#  define BTE_PRINTKV(x)
-#endif	/* BTE_DEBUG */
-
-
-/* BTE status register only supports 16 bits for length field */
-#define BTE_LEN_BITS (16)
-#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
-#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
-
-
-/* Define hardware */
-#define BTES_PER_NODE (is_shub2() ? 4 : 2)
-#define MAX_BTES_PER_NODE 4
-
-#define BTE2OFF_CTRL	0
-#define BTE2OFF_SRC	(SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
-#define BTE2OFF_DEST	(SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
-#define BTE2OFF_NOTIFY	(SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)
-
-#define BTE_BASE_ADDR(interface) 				\
-    (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 :		\
-		  (interface == 1) ? SH2_BT_ENG_CSR_1 :		\
-		  (interface == 2) ? SH2_BT_ENG_CSR_2 :		\
-		  		     SH2_BT_ENG_CSR_3 		\
-		: (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)
-
-#define BTE_SOURCE_ADDR(base)					\
-    (is_shub2() ? base + (BTE2OFF_SRC/8) 			\
-		: base + (BTEOFF_SRC/8))
-
-#define BTE_DEST_ADDR(base)					\
-    (is_shub2() ? base + (BTE2OFF_DEST/8) 			\
-		: base + (BTEOFF_DEST/8))
-
-#define BTE_CTRL_ADDR(base)					\
-    (is_shub2() ? base + (BTE2OFF_CTRL/8) 			\
-		: base + (BTEOFF_CTRL/8))
-
-#define BTE_NOTIF_ADDR(base)					\
-    (is_shub2() ? base + (BTE2OFF_NOTIFY/8) 			\
-		: base + (BTEOFF_NOTIFY/8))
-
-/* Define hardware modes */
-#define BTE_NOTIFY IBCT_NOTIFY
-#define BTE_NORMAL BTE_NOTIFY
-#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
-/* Use a reserved bit to let the caller specify a wait for any BTE */
-#define BTE_WACQUIRE 0x4000
-/* Use the BTE on the node with the destination memory */
-#define BTE_USE_DEST (BTE_WACQUIRE << 1)
-/* Use any available BTE interface on any node for the transfer */
-#define BTE_USE_ANY (BTE_USE_DEST << 1)
-/* macro to force the IBCT0 value valid */
-#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
-
-#define BTE_ACTIVE		(IBLS_BUSY | IBLS_ERROR)
-#define BTE_WORD_AVAILABLE	(IBLS_BUSY << 1)
-#define BTE_WORD_BUSY		(~BTE_WORD_AVAILABLE)
-
-/*
- * Some macros to simplify reading.
- * Start with macros to locate the BTE control registers.
- */
-#define BTE_LNSTAT_LOAD(_bte)						\
-			HUB_L(_bte->bte_base_addr)
-#define BTE_LNSTAT_STORE(_bte, _x)					\
-			HUB_S(_bte->bte_base_addr, (_x))
-#define BTE_SRC_STORE(_bte, _x)						\
-({									\
-		u64 __addr = ((_x) & ~AS_MASK);				\
-		if (is_shub2()) 					\
-			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
-		HUB_S(_bte->bte_source_addr, __addr);			\
-})
-#define BTE_DEST_STORE(_bte, _x)					\
-({									\
-		u64 __addr = ((_x) & ~AS_MASK);				\
-		if (is_shub2()) 					\
-			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
-		HUB_S(_bte->bte_destination_addr, __addr);		\
-})
-#define BTE_CTRL_STORE(_bte, _x)					\
-			HUB_S(_bte->bte_control_addr, (_x))
-#define BTE_NOTIF_STORE(_bte, _x)					\
-({									\
-		u64 __addr = ia64_tpa((_x) & ~AS_MASK);			\
-		if (is_shub2()) 					\
-			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
-		HUB_S(_bte->bte_notify_addr, __addr);			\
-})
-
-#define BTE_START_TRANSFER(_bte, _len, _mode)				\
-	is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
-		: BTE_LNSTAT_STORE(_bte, _len);				\
-		  BTE_CTRL_STORE(_bte, _mode)
-
-/* Possible results from bte_copy and bte_unaligned_copy */
-/* The following error codes map into the BTE hardware codes
- * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
- * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
- * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
- * codes to give the following error codes.
- */
-#define BTEFAIL_OFFSET	1
-
-typedef enum {
-	BTE_SUCCESS,		/* 0 is success */
-	BTEFAIL_DIR,		/* Directory error due to IIO access*/
-	BTEFAIL_POISON,		/* poison error on IO access (write to poison page) */
-	BTEFAIL_WERR,		/* Write error (ie WINV to a Read only line) */
-	BTEFAIL_ACCESS,		/* access error (protection violation) */
-	BTEFAIL_PWERR,		/* Partial Write Error */
-	BTEFAIL_PRERR,		/* Partial Read Error */
-	BTEFAIL_TOUT,		/* CRB Time out */
-	BTEFAIL_XTERR,		/* Incoming xtalk pkt had error bit */
-	BTEFAIL_NOTAVAIL,	/* BTE not available */
-} bte_result_t;
-
-#define BTEFAIL_SH2_RESP_SHORT	0x1	/* bit 000001 */
-#define BTEFAIL_SH2_RESP_LONG	0x2	/* bit 000010 */
-#define BTEFAIL_SH2_RESP_DSP	0x4	/* bit 000100 */
-#define BTEFAIL_SH2_RESP_ACCESS	0x8	/* bit 001000 */
-#define BTEFAIL_SH2_CRB_TO	0x10	/* bit 010000 */
-#define BTEFAIL_SH2_NACK_LIMIT	0x20	/* bit 100000 */
-#define BTEFAIL_SH2_ALL		0x3F	/* bit 111111 */
-
-#define	BTE_ERR_BITS	0x3FUL
-#define	BTE_ERR_SHIFT	36
-#define BTE_ERR_MASK	(BTE_ERR_BITS << BTE_ERR_SHIFT)
-
-#define BTE_ERROR_RETRY(value)						\
-	(is_shub2() ? (value != BTEFAIL_SH2_CRB_TO)			\
-		: (value != BTEFAIL_TOUT))
-
-/*
- * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
- */
-#define BTE_SHUB2_ERROR(_status)					\
-	((_status & BTE_ERR_MASK) 					\
-	   ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
-	   : _status)
-
-#define BTE_GET_ERROR_STATUS(_status)					\
-	(BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
-
-#define BTE_VALID_SH2_ERROR(value)					\
-	((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
-
-/*
- * Structure defining a bte.  An instance of this
- * structure is created in the nodepda for each
- * bte on that node (as defined by BTES_PER_NODE)
- * This structure contains everything necessary
- * to work with a BTE.
- */
-struct bteinfo_s {
-	volatile u64 notify ____cacheline_aligned;
-	u64 *bte_base_addr ____cacheline_aligned;
-	u64 *bte_source_addr;
-	u64 *bte_destination_addr;
-	u64 *bte_control_addr;
-	u64 *bte_notify_addr;
-	spinlock_t spinlock;
-	cnodeid_t bte_cnode;	/* cnode                            */
-	int bte_error_count;	/* Number of errors encountered     */
-	int bte_num;		/* 0 --> BTE0, 1 --> BTE1           */
-	int cleanup_active;	/* Interface is locked for cleanup  */
-	volatile bte_result_t bh_error;	/* error while processing   */
-	volatile u64 *most_rcnt_na;
-	struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
-};
-
-
-/*
- * Function prototypes (functions defined in bte.c, used elsewhere)
- */
-extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
-extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
-extern void bte_error_handler(unsigned long);
-
-#define bte_zero(dest, len, mode, notification) \
-	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
-
-/*
- * The following is the prefered way of calling bte_unaligned_copy
- * If the copy is fully cache line aligned, then bte_copy is
- * used instead.  Since bte_copy is inlined, this saves a call
- * stack.  NOTE: bte_copy is called synchronously and does block
- * until the transfer is complete.  In order to get the asynch
- * version of bte_copy, you must perform this check yourself.
- */
-#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
-	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
-	  (dest & L1_CACHE_MASK)) ?                                     \
-	 bte_unaligned_copy(src, dest, len, mode) :              	\
-	 bte_copy(src, dest, len, mode, NULL))
-
-
-#endif	/* _ASM_IA64_SN_BTE_H */
diff --git a/include/asm-ia64/sn/clksupport.h b/include/asm-ia64/sn/clksupport.h
deleted file mode 100644
index d340c365a824..000000000000
--- a/include/asm-ia64/sn/clksupport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-/*
- * This file contains definitions for accessing a platform supported high resolution
- * clock. The clock is monitonically increasing and can be accessed from any node
- * in the system. The clock is synchronized across nodes - all nodes see the
- * same value.
- * 
- *	RTC_COUNTER_ADDR - contains the address of the counter 
- *
- */
-
-#ifndef _ASM_IA64_SN_CLKSUPPORT_H
-#define _ASM_IA64_SN_CLKSUPPORT_H
-
-extern unsigned long sn_rtc_cycles_per_second;
-
-#define RTC_COUNTER_ADDR	((long *)LOCAL_MMR_ADDR(SH_RTC))
-
-#define rtc_time()		(*RTC_COUNTER_ADDR)
-
-#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
diff --git a/include/asm-ia64/sn/geo.h b/include/asm-ia64/sn/geo.h
deleted file mode 100644
index f083c9434066..000000000000
--- a/include/asm-ia64/sn/geo.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_GEO_H
-#define _ASM_IA64_SN_GEO_H
-
-/* The geoid_t implementation below is based loosely on the pcfg_t
-   implementation in sys/SN/promcfg.h. */
-
-/* Type declaractions */
-
-/* Size of a geoid_t structure (must be before decl. of geoid_u) */
-#define GEOID_SIZE	8	/* Would 16 be better?  The size can
-				   be different on different platforms. */
-
-#define MAX_SLOTS	0xf	/* slots per module */
-#define MAX_SLABS	0xf	/* slabs per slot */
-
-typedef unsigned char	geo_type_t;
-
-/* Fields common to all substructures */
-typedef struct geo_common_s {
-    moduleid_t	module;		/* The module (box) this h/w lives in */
-    geo_type_t	type;		/* What type of h/w is named by this geoid_t */
-    slabid_t	slab:4;		/* slab (ASIC), 0 .. 15 within slot */
-    slotid_t	slot:4;		/* slot (Blade), 0 .. 15 within module */
-} geo_common_t;
-
-/* Additional fields for particular types of hardware */
-typedef struct geo_node_s {
-    geo_common_t	common;		/* No additional fields needed */
-} geo_node_t;
-
-typedef struct geo_rtr_s {
-    geo_common_t	common;		/* No additional fields needed */
-} geo_rtr_t;
-
-typedef struct geo_iocntl_s {
-    geo_common_t	common;		/* No additional fields needed */
-} geo_iocntl_t;
-
-typedef struct geo_pcicard_s {
-    geo_iocntl_t	common;
-    char		bus;	/* Bus/widget number */
-    char		slot;	/* PCI slot number */
-} geo_pcicard_t;
-
-/* Subcomponents of a node */
-typedef struct geo_cpu_s {
-    geo_node_t	node;
-    char	slice;		/* Which CPU on the node */
-} geo_cpu_t;
-
-typedef struct geo_mem_s {
-    geo_node_t	node;
-    char	membus;		/* The memory bus on the node */
-    char	memslot;	/* The memory slot on the bus */
-} geo_mem_t;
-
-
-typedef union geoid_u {
-    geo_common_t	common;
-    geo_node_t		node;
-    geo_iocntl_t	iocntl;
-    geo_pcicard_t	pcicard;
-    geo_rtr_t		rtr;
-    geo_cpu_t		cpu;
-    geo_mem_t		mem;
-    char		padsize[GEOID_SIZE];
-} geoid_t;
-
-
-/* Preprocessor macros */
-
-#define GEO_MAX_LEN	48	/* max. formatted length, plus some pad:
-				   module/001c07/slab/5/node/memory/2/slot/4 */
-
-/* Values for geo_type_t */
-#define GEO_TYPE_INVALID	0
-#define GEO_TYPE_MODULE		1
-#define GEO_TYPE_NODE		2
-#define GEO_TYPE_RTR		3
-#define GEO_TYPE_IOCNTL		4
-#define GEO_TYPE_IOCARD		5
-#define GEO_TYPE_CPU		6
-#define GEO_TYPE_MEM		7
-#define GEO_TYPE_MAX		(GEO_TYPE_MEM+1)
-
-/* Parameter for hwcfg_format_geoid_compt() */
-#define GEO_COMPT_MODULE	1
-#define GEO_COMPT_SLAB		2
-#define GEO_COMPT_IOBUS		3
-#define GEO_COMPT_IOSLOT	4
-#define GEO_COMPT_CPU		5
-#define GEO_COMPT_MEMBUS	6
-#define GEO_COMPT_MEMSLOT	7
-
-#define GEO_INVALID_STR		"<invalid>"
-
-#define INVALID_NASID           ((nasid_t)-1)
-#define INVALID_CNODEID         ((cnodeid_t)-1)
-#define INVALID_PNODEID         ((pnodeid_t)-1)
-#define INVALID_SLAB            (slabid_t)-1
-#define INVALID_SLOT            (slotid_t)-1
-#define INVALID_MODULE          ((moduleid_t)-1)
-
-static inline slabid_t geo_slab(geoid_t g)
-{
-	return (g.common.type == GEO_TYPE_INVALID) ?
-		INVALID_SLAB : g.common.slab;
-}
-
-static inline slotid_t geo_slot(geoid_t g)
-{
-	return (g.common.type == GEO_TYPE_INVALID) ?
-		INVALID_SLOT : g.common.slot;
-}
-
-static inline moduleid_t geo_module(geoid_t g)
-{
-	return (g.common.type == GEO_TYPE_INVALID) ?
-		INVALID_MODULE : g.common.module;
-}
-
-extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
-
-#endif /* _ASM_IA64_SN_GEO_H */
diff --git a/include/asm-ia64/sn/intr.h b/include/asm-ia64/sn/intr.h
deleted file mode 100644
index e0487aa97418..000000000000
--- a/include/asm-ia64/sn/intr.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_INTR_H
-#define _ASM_IA64_SN_INTR_H
-
-#include <linux/rcupdate.h>
-#include <asm/sn/types.h>
-
-#define SGI_UART_VECTOR		0xe9
-
-/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
-#define SGI_XPC_ACTIVATE	0x30
-#define SGI_II_ERROR		0x31
-#define SGI_XBOW_ERROR		0x32
-#define SGI_PCIASIC_ERROR	0x33
-#define SGI_ACPI_SCI_INT	0x34
-#define SGI_TIOCA_ERROR		0x35
-#define SGI_TIO_ERROR		0x36
-#define SGI_TIOCX_ERROR		0x37
-#define SGI_MMTIMER_VECTOR	0x38
-#define SGI_XPC_NOTIFY		0xe7
-
-#define IA64_SN2_FIRST_DEVICE_VECTOR	0x3c
-#define IA64_SN2_LAST_DEVICE_VECTOR	0xe6
-
-#define SN2_IRQ_RESERVED	0x1
-#define SN2_IRQ_CONNECTED	0x2
-#define SN2_IRQ_SHARED		0x4
-
-// The SN PROM irq struct
-struct sn_irq_info {
-	struct sn_irq_info *irq_next;	/* deprecated DO NOT USE     */
-	short		irq_nasid;	/* Nasid IRQ is assigned to  */
-	int		irq_slice;	/* slice IRQ is assigned to  */
-	int		irq_cpuid;	/* kernel logical cpuid	     */
-	int		irq_irq;	/* the IRQ number */
-	int		irq_int_bit;	/* Bridge interrupt pin */
-					/* <0 means MSI */
-	u64	irq_xtalkaddr;	/* xtalkaddr IRQ is sent to  */
-	int		irq_bridge_type;/* pciio asic type (pciio.h) */
-	void	       *irq_bridge;	/* bridge generating irq     */
-	void	       *irq_pciioinfo;	/* associated pciio_info_t   */
-	int		irq_last_intr;	/* For Shub lb lost intr WAR */
-	int		irq_cookie;	/* unique cookie 	     */
-	int		irq_flags;	/* flags */
-	int		irq_share_cnt;	/* num devices sharing IRQ   */
-	struct list_head	list;	/* list of sn_irq_info structs */
-	struct rcu_head		rcu;	/* rcu callback list */
-};
-
-extern void sn_send_IPI_phys(int, long, int, int);
-extern u64 sn_intr_alloc(nasid_t, int,
-			      struct sn_irq_info *,
-			      int, nasid_t, int);
-extern void sn_intr_free(nasid_t, int, struct sn_irq_info *);
-extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int);
-extern void sn_set_err_irq_affinity(unsigned int);
-extern struct list_head **sn_irq_lh;
-
-#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
-
-#endif /* _ASM_IA64_SN_INTR_H */
diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h
deleted file mode 100644
index 41c73a735628..000000000000
--- a/include/asm-ia64/sn/io.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/* 
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_SN_IO_H
-#define _ASM_SN_IO_H
-#include <linux/compiler.h>
-#include <asm/intrinsics.h>
-
-extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
-extern void __sn_mmiowb(void); /* Forward definition */
-
-extern int num_cnodes;
-
-#define __sn_mf_a()   ia64_mfa()
-
-extern void sn_dma_flush(unsigned long);
-
-#define __sn_inb ___sn_inb
-#define __sn_inw ___sn_inw
-#define __sn_inl ___sn_inl
-#define __sn_outb ___sn_outb
-#define __sn_outw ___sn_outw
-#define __sn_outl ___sn_outl
-#define __sn_readb ___sn_readb
-#define __sn_readw ___sn_readw
-#define __sn_readl ___sn_readl
-#define __sn_readq ___sn_readq
-#define __sn_readb_relaxed ___sn_readb_relaxed
-#define __sn_readw_relaxed ___sn_readw_relaxed
-#define __sn_readl_relaxed ___sn_readl_relaxed
-#define __sn_readq_relaxed ___sn_readq_relaxed
-
-/*
- * Convenience macros for setting/clearing bits using the above accessors
- */
-
-#define __sn_setq_relaxed(addr, val) \
-	writeq((__sn_readq_relaxed(addr) | (val)), (addr))
-#define __sn_clrq_relaxed(addr, val) \
-	writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
-
-/*
- * The following routines are SN Platform specific, called when
- * a reference is made to inX/outX set macros.  SN Platform
- * inX set of macros ensures that Posted DMA writes on the
- * Bridge is flushed.
- *
- * The routines should be self explainatory.
- */
-
-static inline unsigned int
-___sn_inb (unsigned long port)
-{
-	volatile unsigned char *addr;
-	unsigned char ret = -1;
-
-	if ((addr = sn_io_addr(port))) {
-		ret = *addr;
-		__sn_mf_a();
-		sn_dma_flush((unsigned long)addr);
-	}
-	return ret;
-}
-
-static inline unsigned int
-___sn_inw (unsigned long port)
-{
-	volatile unsigned short *addr;
-	unsigned short ret = -1;
-
-	if ((addr = sn_io_addr(port))) {
-		ret = *addr;
-		__sn_mf_a();
-		sn_dma_flush((unsigned long)addr);
-	}
-	return ret;
-}
-
-static inline unsigned int
-___sn_inl (unsigned long port)
-{
-	volatile unsigned int *addr;
-	unsigned int ret = -1;
-
-	if ((addr = sn_io_addr(port))) {
-		ret = *addr;
-		__sn_mf_a();
-		sn_dma_flush((unsigned long)addr);
-	}
-	return ret;
-}
-
-static inline void
-___sn_outb (unsigned char val, unsigned long port)
-{
-	volatile unsigned char *addr;
-
-	if ((addr = sn_io_addr(port))) {
-		*addr = val;
-		__sn_mmiowb();
-	}
-}
-
-static inline void
-___sn_outw (unsigned short val, unsigned long port)
-{
-	volatile unsigned short *addr;
-
-	if ((addr = sn_io_addr(port))) {
-		*addr = val;
-		__sn_mmiowb();
-	}
-}
-
-static inline void
-___sn_outl (unsigned int val, unsigned long port)
-{
-	volatile unsigned int *addr;
-
-	if ((addr = sn_io_addr(port))) {
-		*addr = val;
-		__sn_mmiowb();
-	}
-}
-
-/*
- * The following routines are SN Platform specific, called when 
- * a reference is made to readX/writeX set macros.  SN Platform 
- * readX set of macros ensures that Posted DMA writes on the 
- * Bridge is flushed.
- * 
- * The routines should be self explainatory.
- */
-
-static inline unsigned char
-___sn_readb (const volatile void __iomem *addr)
-{
-	unsigned char val;
-
-	val = *(volatile unsigned char __force *)addr;
-	__sn_mf_a();
-	sn_dma_flush((unsigned long)addr);
-        return val;
-}
-
-static inline unsigned short
-___sn_readw (const volatile void __iomem *addr)
-{
-	unsigned short val;
-
-	val = *(volatile unsigned short __force *)addr;
-	__sn_mf_a();
-	sn_dma_flush((unsigned long)addr);
-        return val;
-}
-
-static inline unsigned int
-___sn_readl (const volatile void __iomem *addr)
-{
-	unsigned int val;
-
-	val = *(volatile unsigned int __force *)addr;
-	__sn_mf_a();
-	sn_dma_flush((unsigned long)addr);
-        return val;
-}
-
-static inline unsigned long
-___sn_readq (const volatile void __iomem *addr)
-{
-	unsigned long val;
-
-	val = *(volatile unsigned long __force *)addr;
-	__sn_mf_a();
-	sn_dma_flush((unsigned long)addr);
-        return val;
-}
-
-/*
- * For generic and SN2 kernels, we have a set of fast access
- * PIO macros.	These macros are provided on SN Platform
- * because the normal inX and readX macros perform an
- * additional task of flushing Post DMA request on the Bridge.
- *
- * These routines should be self explainatory.
- */
-
-static inline unsigned int
-sn_inb_fast (unsigned long port)
-{
-	volatile unsigned char *addr = (unsigned char *)port;
-	unsigned char ret;
-
-	ret = *addr;
-	__sn_mf_a();
-	return ret;
-}
-
-static inline unsigned int
-sn_inw_fast (unsigned long port)
-{
-	volatile unsigned short *addr = (unsigned short *)port;
-	unsigned short ret;
-
-	ret = *addr;
-	__sn_mf_a();
-	return ret;
-}
-
-static inline unsigned int
-sn_inl_fast (unsigned long port)
-{
-	volatile unsigned int *addr = (unsigned int *)port;
-	unsigned int ret;
-
-	ret = *addr;
-	__sn_mf_a();
-	return ret;
-}
-
-static inline unsigned char
-___sn_readb_relaxed (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-
-static inline unsigned short
-___sn_readw_relaxed (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned short __force *)addr;
-}
-
-static inline unsigned int
-___sn_readl_relaxed (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned int __force *) addr;
-}
-
-static inline unsigned long
-___sn_readq_relaxed (const volatile void __iomem *addr)
-{
-	return *(volatile unsigned long __force *) addr;
-}
-
-struct pci_dev;
-
-static inline int
-sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
-{
-
-	if (vchan > 1) {
-		return -1;
-	}
-
-	if (!(*addr >> 32))	/* Using a mask here would be cleaner */
-		return 0;	/* but this generates better code */
-
-	if (vchan == 1) {
-		/* Set Bit 57 */
-		*addr |= (1UL << 57);
-	} else {
-		/* Clear Bit 57 */
-		*addr &= ~(1UL << 57);
-	}
-
-	return 0;
-}
-
-#endif	/* _ASM_SN_IO_H */
diff --git a/include/asm-ia64/sn/ioc3.h b/include/asm-ia64/sn/ioc3.h
deleted file mode 100644
index 95ed6cc83cf1..000000000000
--- a/include/asm-ia64/sn/ioc3.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright (C) 2005 Silicon Graphics, Inc.
- */
-#ifndef IA64_SN_IOC3_H
-#define IA64_SN_IOC3_H
-
-/* serial port register map */
-struct ioc3_serialregs {
-	uint32_t sscr;
-	uint32_t stpir;
-	uint32_t stcir;
-	uint32_t srpir;
-	uint32_t srcir;
-	uint32_t srtr;
-	uint32_t shadow;
-};
-
-/* SUPERIO uart register map */
-struct ioc3_uartregs {
-	char iu_lcr;
-	union {
-		char iir;	/* read only */
-		char fcr;	/* write only */
-	} u3;
-	union {
-		char ier;	/* DLAB == 0 */
-		char dlm;	/* DLAB == 1 */
-	} u2;
-	union {
-		char rbr;	/* read only, DLAB == 0 */
-		char thr;	/* write only, DLAB == 0 */
-		char dll;	/* DLAB == 1 */
-	} u1;
-	char iu_scr;
-	char iu_msr;
-	char iu_lsr;
-	char iu_mcr;
-};
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
-
-struct ioc3_sioregs {
-	char fill[0x170];
-	struct ioc3_uartregs uartb;
-	struct ioc3_uartregs uarta;
-};
-
-/* PCI IO/mem space register map */
-struct ioc3 {
-	uint32_t pci_id;
-	uint32_t pci_scr;
-	uint32_t pci_rev;
-	uint32_t pci_lat;
-	uint32_t pci_addr;
-	uint32_t pci_err_addr_l;
-	uint32_t pci_err_addr_h;
-
-	uint32_t sio_ir;
-	/* these registers are read-only for general kernel code. To
-	 * modify them use the functions in ioc3.c
-	 */
-	uint32_t sio_ies;
-	uint32_t sio_iec;
-	uint32_t sio_cr;
-	uint32_t int_out;
-	uint32_t mcr;
-	uint32_t gpcr_s;
-	uint32_t gpcr_c;
-	uint32_t gpdr;
-	uint32_t gppr[9];
-	char fill[0x4c];
-
-	/* serial port registers */
-	uint32_t sbbr_h;
-	uint32_t sbbr_l;
-
-	struct ioc3_serialregs port_a;
-	struct ioc3_serialregs port_b;
-	char fill1[0x1ff10];
-	/* superio registers */
-	struct ioc3_sioregs sregs;
-};
-
-/* These don't exist on the ioc3 serial card... */
-#define eier	fill1[8]
-#define eisr	fill1[4]
-
-#define PCI_LAT			0xc	/* Latency Timer */
-#define PCI_SCR_DROP_MODE_EN	0x00008000 /* drop pios on parity err */
-#define UARTA_BASE		0x178
-#define UARTB_BASE		0x170
-
-
-/* bitmasks for serial RX status byte */
-#define RXSB_OVERRUN		0x01	/* char(s) lost */
-#define RXSB_PAR_ERR		0x02	/* parity error */
-#define RXSB_FRAME_ERR		0x04	/* framing error */
-#define RXSB_BREAK		0x08	/* break character */
-#define RXSB_CTS		0x10	/* state of CTS */
-#define RXSB_DCD		0x20	/* state of DCD */
-#define RXSB_MODEM_VALID	0x40	/* DCD, CTS and OVERRUN are valid */
-#define RXSB_DATA_VALID		0x80	/* FRAME_ERR PAR_ERR & BREAK valid */
-
-/* bitmasks for serial TX control byte */
-#define TXCB_INT_WHEN_DONE	0x20	/* interrupt after this byte is sent */
-#define TXCB_INVALID		0x00	/* byte is invalid */
-#define TXCB_VALID		0x40	/* byte is valid */
-#define TXCB_MCR		0x80	/* data<7:0> to modem cntrl register */
-#define TXCB_DELAY		0xc0	/* delay data<7:0> mSec */
-
-/* bitmasks for SBBR_L */
-#define SBBR_L_SIZE		0x00000001	/* 0 1KB rings, 1 4KB rings */
-
-/* bitmasks for SSCR_<A:B> */
-#define SSCR_RX_THRESHOLD	0x000001ff	/* hiwater mark */
-#define SSCR_TX_TIMER_BUSY	0x00010000	/* TX timer in progress */
-#define SSCR_HFC_EN		0x00020000	/* h/w flow cntrl enabled */
-#define SSCR_RX_RING_DCD	0x00040000	/* postRX record on delta-DCD */
-#define SSCR_RX_RING_CTS	0x00080000	/* postRX record on delta-CTS */
-#define SSCR_HIGH_SPD		0x00100000	/* 4X speed */
-#define SSCR_DIAG		0x00200000	/* bypass clock divider */
-#define SSCR_RX_DRAIN		0x08000000	/* drain RX buffer to memory */
-#define SSCR_DMA_EN		0x10000000	/* enable ring buffer DMA */
-#define SSCR_DMA_PAUSE		0x20000000	/* pause DMA */
-#define SSCR_PAUSE_STATE	0x40000000	/* set when PAUSE takes effect*/
-#define SSCR_RESET		0x80000000	/* reset DMA channels */
-
-/* all producer/comsumer pointers are the same bitfield */
-#define PROD_CONS_PTR_4K	0x00000ff8	/* for 4K buffers */
-#define PROD_CONS_PTR_1K	0x000003f8	/* for 1K buffers */
-#define PROD_CONS_PTR_OFF	3
-
-/* bitmasks for SRCIR_<A:B> */
-#define SRCIR_ARM		0x80000000	/* arm RX timer */
-
-/* bitmasks for SHADOW_<A:B> */
-#define SHADOW_DR		0x00000001	/* data ready */
-#define SHADOW_OE		0x00000002	/* overrun error */
-#define SHADOW_PE		0x00000004	/* parity error */
-#define SHADOW_FE		0x00000008	/* framing error */
-#define SHADOW_BI		0x00000010	/* break interrupt */
-#define SHADOW_THRE		0x00000020	/* transmit holding reg empty */
-#define SHADOW_TEMT		0x00000040	/* transmit shift reg empty */
-#define SHADOW_RFCE		0x00000080	/* char in RX fifo has error */
-#define SHADOW_DCTS		0x00010000	/* delta clear to send */
-#define SHADOW_DDCD		0x00080000	/* delta data carrier detect */
-#define SHADOW_CTS		0x00100000	/* clear to send */
-#define SHADOW_DCD		0x00800000	/* data carrier detect */
-#define SHADOW_DTR		0x01000000	/* data terminal ready */
-#define SHADOW_RTS		0x02000000	/* request to send */
-#define SHADOW_OUT1		0x04000000	/* 16550 OUT1 bit */
-#define SHADOW_OUT2		0x08000000	/* 16550 OUT2 bit */
-#define SHADOW_LOOP		0x10000000	/* loopback enabled */
-
-/* bitmasks for SRTR_<A:B> */
-#define SRTR_CNT		0x00000fff	/* reload value for RX timer */
-#define SRTR_CNT_VAL		0x0fff0000	/* current value of RX timer */
-#define SRTR_CNT_VAL_SHIFT	16
-#define SRTR_HZ			16000		/* SRTR clock frequency */
-
-/* bitmasks for SIO_IR, SIO_IEC and SIO_IES  */
-#define SIO_IR_SA_TX_MT		0x00000001	/* Serial port A TX empty */
-#define SIO_IR_SA_RX_FULL	0x00000002	/* port A RX buf full */
-#define SIO_IR_SA_RX_HIGH	0x00000004	/* port A RX hiwat */
-#define SIO_IR_SA_RX_TIMER	0x00000008	/* port A RX timeout */
-#define SIO_IR_SA_DELTA_DCD	0x00000010	/* port A delta DCD */
-#define SIO_IR_SA_DELTA_CTS	0x00000020	/* port A delta CTS */
-#define SIO_IR_SA_INT		0x00000040	/* port A pass-thru intr */
-#define SIO_IR_SA_TX_EXPLICIT	0x00000080	/* port A explicit TX thru */
-#define SIO_IR_SA_MEMERR	0x00000100	/* port A PCI error */
-#define SIO_IR_SB_TX_MT		0x00000200
-#define SIO_IR_SB_RX_FULL	0x00000400
-#define SIO_IR_SB_RX_HIGH	0x00000800
-#define SIO_IR_SB_RX_TIMER	0x00001000
-#define SIO_IR_SB_DELTA_DCD	0x00002000
-#define SIO_IR_SB_DELTA_CTS	0x00004000
-#define SIO_IR_SB_INT		0x00008000
-#define SIO_IR_SB_TX_EXPLICIT	0x00010000
-#define SIO_IR_SB_MEMERR	0x00020000
-#define SIO_IR_PP_INT		0x00040000	/* P port pass-thru intr */
-#define SIO_IR_PP_INTA		0x00080000	/* PP context A thru */
-#define SIO_IR_PP_INTB		0x00100000	/* PP context B thru */
-#define SIO_IR_PP_MEMERR	0x00200000	/* PP PCI error */
-#define SIO_IR_KBD_INT		0x00400000	/* kbd/mouse intr */
-#define SIO_IR_RT_INT		0x08000000	/* RT output pulse */
-#define SIO_IR_GEN_INT1		0x10000000	/* RT input pulse */
-#define SIO_IR_GEN_INT_SHIFT	28
-
-/* per device interrupt masks */
-#define SIO_IR_SA		(SIO_IR_SA_TX_MT | \
-				 SIO_IR_SA_RX_FULL | \
-				 SIO_IR_SA_RX_HIGH | \
-				 SIO_IR_SA_RX_TIMER | \
-				 SIO_IR_SA_DELTA_DCD | \
-				 SIO_IR_SA_DELTA_CTS | \
-				 SIO_IR_SA_INT | \
-				 SIO_IR_SA_TX_EXPLICIT | \
-				 SIO_IR_SA_MEMERR)
-
-#define SIO_IR_SB		(SIO_IR_SB_TX_MT | \
-				 SIO_IR_SB_RX_FULL | \
-				 SIO_IR_SB_RX_HIGH | \
-				 SIO_IR_SB_RX_TIMER | \
-				 SIO_IR_SB_DELTA_DCD | \
-				 SIO_IR_SB_DELTA_CTS | \
-				 SIO_IR_SB_INT | \
-				 SIO_IR_SB_TX_EXPLICIT | \
-				 SIO_IR_SB_MEMERR)
-
-#define SIO_IR_PP		(SIO_IR_PP_INT | SIO_IR_PP_INTA | \
-				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
-#define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
-
-/* bitmasks for SIO_CR */
-#define SIO_CR_CMD_PULSE_SHIFT 15
-#define SIO_CR_SER_A_BASE_SHIFT 1
-#define SIO_CR_SER_B_BASE_SHIFT 8
-#define SIO_CR_ARB_DIAG		0x00380000	/* cur !enet PCI requet (ro) */
-#define SIO_CR_ARB_DIAG_TXA	0x00000000
-#define SIO_CR_ARB_DIAG_RXA	0x00080000
-#define SIO_CR_ARB_DIAG_TXB	0x00100000
-#define SIO_CR_ARB_DIAG_RXB	0x00180000
-#define SIO_CR_ARB_DIAG_PP	0x00200000
-#define SIO_CR_ARB_DIAG_IDLE	0x00400000	/* 0 -> active request (ro) */
-
-/* defs for some of the generic I/O pins */
-#define GPCR_PHY_RESET		0x20	/* pin is output to PHY reset */
-#define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
-#define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
-
-#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
-#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin cntrling uartb modeselect */
-#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin cntrling uarta modeselect */
-
-#endif /* IA64_SN_IOC3_H */
diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h
deleted file mode 100644
index bcbf209d63be..000000000000
--- a/include/asm-ia64/sn/klconfig.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Derived from IRIX <sys/SN/klconfig.h>.
- *
- * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc.  All Rights Reserved.
- * Copyright (C) 1999 by Ralf Baechle
- */
-#ifndef _ASM_IA64_SN_KLCONFIG_H
-#define _ASM_IA64_SN_KLCONFIG_H
-
-/*
- * The KLCONFIG structures store info about the various BOARDs found
- * during Hardware Discovery. In addition, it stores info about the
- * components found on the BOARDs.
- */
-
-typedef s32 klconf_off_t;
-
-
-/* Functions/macros needed to use this structure */
-
-typedef struct kl_config_hdr {
-	char		pad[20];
-	klconf_off_t	ch_board_info;	/* the link list of boards */
-	char		pad0[88];
-} kl_config_hdr_t;
-
-
-#define NODE_OFFSET_TO_LBOARD(nasid,off)        (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
-
-/*
- * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
- * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to 
- * the LOCAL/current NODE. REMOTE means it is attached to a different
- * node.(TBD - Need a way to treat ROUTER boards.)
- *
- * There are 2 different structures to represent these boards -
- * lboard - Local board, rboard - remote board. These 2 structures
- * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
- * Figure below). The first byte of the rboard or lboard structure
- * is used to find out its type - no unions are used.
- * If it is a lboard, then the config info of this board will be found
- * on the local node. (LOCAL NODE BASE + offset value gives pointer to 
- * the structure.
- * If it is a rboard, the local structure contains the node number
- * and the offset of the beginning of the LINKED LIST on the remote node.
- * The details of the hardware on a remote node can be built locally,
- * if required, by reading the LINKED LIST on the remote node and 
- * ignoring all the rboards on that node.
- *
- * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the 
- * First board info on the remote node. The remote node list is 
- * traversed as the local list, using the REMOTE BASE ADDRESS and not
- * the local base address and ignoring all rboard values.
- *
- * 
- KLCONFIG
-
- +------------+      +------------+      +------------+      +------------+
- |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
- +------------+  |   +------------+  |   +------------+  |   +------------+
- | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
- +------------+  |   +------------+  |   +------------+  |   +------------+
- | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
- +------------+      +------------+      +------------+      +------------+
-
-
- +------------+
- | board info |
- +------------+       +--------------------------------+
- | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
- +------------+       +--------------------------------+
- | compt 2    |--+
- +------------+  |    +--------------------------------+
- |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
- +------------+       +--------------------------------+
- | errinfo    |--+
- +------------+  |    +--------------------------------+
-                 +--->|r/l brd errinfo,compt err flags |
-                      +--------------------------------+
-
- *
- * Each BOARD consists of COMPONENTs and the BOARD structure has 
- * pointers (offsets) to its COMPONENT structure.
- * The COMPONENT structure has version info, size and speed info, revision,
- * error info and the NIC info. This structure can accommodate any
- * BOARD with arbitrary COMPONENT composition.
- *
- * The ERRORINFO part of each BOARD has error information
- * that describes errors about the BOARD itself. It also has flags to
- * indicate the COMPONENT(s) on the board that have errors. The error 
- * information specific to the COMPONENT is present in the respective 
- * COMPONENT structure.
- *
- * The ERRORINFO structure is also treated like a COMPONENT, ie. the 
- * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
- * structure also has a pointer to the ERRORINFO structure. This is 
- * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
- * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where 
- * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
- * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info 
- * which is present on the REMOTE NODE.(TBD)
- * REMOTE ERRINFO can be stored on any of the nearest nodes 
- * or on all the nearest nodes.(TBD)
- * Like BOARD structures, REMOTE ERRINFO structures can be built locally
- * using the rboard errinfo pointer.
- *
- * In order to get useful information from this Data organization, a set of
- * interface routines are provided (TBD). The important thing to remember while
- * manipulating the structures, is that, the NODE number information should
- * be used. If the NODE is non-zero (remote) then each offset should
- * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. 
- * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
- * 
- * Note that these structures do not provide much info about connectivity.
- * That info will be part of HWGRAPH, which is an extension of the cfg_t
- * data structure. (ref IP27prom/cfg.h) It has to be extended to include
- * the IO part of the Network(TBD).
- *
- * The data structures below define the above concepts.
- */
-
-
-/*
- * BOARD classes
- */
-
-#define KLCLASS_MASK	0xf0   
-#define KLCLASS_NONE	0x00
-#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
-#define KLCLASS_CPU	KLCLASS_NODE	
-#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI 
-					    and the non-graphics widget boards */
-#define KLCLASS_ROUTER	0x30             /* Router board */
-#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
-                                            so that we can record error info */
-#define KLCLASS_IOBRICK	0x70		/* IP35 iobrick */
-#define KLCLASS_MAX	8		/* Bump this if a new CLASS is added */
-
-#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
-
-
-/*
- * board types
- */
-
-#define KLTYPE_MASK	0x0f
-#define KLTYPE(_x)      ((_x) & KLTYPE_MASK)
-
-#define KLTYPE_SNIA	(KLCLASS_CPU | 0x1)
-#define KLTYPE_TIO	(KLCLASS_CPU | 0x2)
-
-#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
-#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
-#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
-
-#define KLTYPE_IOBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
-
-#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
-#define KLTYPE_NBRICK		(KLCLASS_IOBRICK | 0x4)
-#define KLTYPE_PXBRICK		(KLCLASS_IOBRICK | 0x6)
-#define KLTYPE_IXBRICK		(KLCLASS_IOBRICK | 0x7)
-#define KLTYPE_CGBRICK		(KLCLASS_IOBRICK | 0x8)
-#define KLTYPE_OPUSBRICK	(KLCLASS_IOBRICK | 0x9)
-#define KLTYPE_SABRICK          (KLCLASS_IOBRICK | 0xa)
-#define KLTYPE_IABRICK		(KLCLASS_IOBRICK | 0xb)
-#define KLTYPE_PABRICK          (KLCLASS_IOBRICK | 0xc)
-#define KLTYPE_GABRICK		(KLCLASS_IOBRICK | 0xd)
-
-
-/* 
- * board structures
- */
-
-#define MAX_COMPTS_PER_BRD 24
-
-typedef struct lboard_s {
-	klconf_off_t 	brd_next_any;     /* Next BOARD */
-	unsigned char 	struct_type;      /* type of structure, local or remote */
-	unsigned char 	brd_type;         /* type+class */
-	unsigned char 	brd_sversion;     /* version of this structure */
-        unsigned char 	brd_brevision;    /* board revision */
-        unsigned char 	brd_promver;      /* board prom version, if any */
- 	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
-	unsigned char 	brd_slot;         /* slot number */
-	unsigned short	brd_debugsw;      /* Debug switches */
-	geoid_t		brd_geoid;	  /* geo id */
-	partid_t 	brd_partition;    /* Partition number */
-        unsigned short 	brd_diagval;      /* diagnostic value */
-        unsigned short 	brd_diagparm;     /* diagnostic parameter */
-        unsigned char 	brd_inventory;    /* inventory history */
-        unsigned char 	brd_numcompts;    /* Number of components */
-        nic_t         	brd_nic;          /* Number in CAN */
-	nasid_t		brd_nasid;        /* passed parameter */
-	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
-	klconf_off_t 	brd_errinfo;      /* Board's error information */
-	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
-	char            pad0[4];
-	unsigned char	brd_confidence;	  /* confidence that the board is bad */
-	nasid_t		brd_owner;        /* who owns this board */
-	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
-	char		pad1[24];	  /* future expansion */
-	char		brd_name[32];
-	nasid_t		brd_next_same_host; /* host of next brd w/same nasid */
-	klconf_off_t	brd_next_same;    /* Next BOARD with same nasid */
-} lboard_t;
-
-/*
- * Generic info structure. This stores common info about a 
- * component.
- */
- 
-typedef struct klinfo_s {                  /* Generic info */
-        unsigned char   struct_type;       /* type of this structure */
-        unsigned char   struct_version;    /* version of this structure */
-        unsigned char   flags;            /* Enabled, disabled etc */
-        unsigned char   revision;         /* component revision */
-        unsigned short  diagval;          /* result of diagnostics */
-        unsigned short  diagparm;         /* diagnostic parameter */
-        unsigned char   inventory;        /* previous inventory status */
-        unsigned short  partid;		   /* widget part number */
-	nic_t 		nic;              /* MUst be aligned properly */
-        unsigned char   physid;           /* physical id of component */
-        unsigned int    virtid;           /* virtual id as seen by system */
-	unsigned char	widid;	          /* Widget id - if applicable */
-	nasid_t		nasid;            /* node number - from parent */
-	char		pad1;		  /* pad out structure. */
-	char		pad2;		  /* pad out structure. */
-	void		*data;
-        klconf_off_t	errinfo;          /* component specific errors */
-        unsigned short  pad3;             /* pci fields have moved over to */
-        unsigned short  pad4;             /* klbri_t */
-} klinfo_t ;
-
-
-static inline lboard_t *find_lboard_next(lboard_t * brd)
-{
-	if (brd && brd->brd_next_any)
-		return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
-        return NULL;
-}
-
-#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h
deleted file mode 100644
index 344bf44bb356..000000000000
--- a/include/asm-ia64/sn/l1.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
- */
-
-#ifndef _ASM_IA64_SN_L1_H
-#define _ASM_IA64_SN_L1_H
-
-/* brick type response codes */
-#define L1_BRICKTYPE_PX         0x23            /* # */
-#define L1_BRICKTYPE_PE         0x25            /* % */
-#define L1_BRICKTYPE_N_p0       0x26            /* & */
-#define L1_BRICKTYPE_IP45       0x34            /* 4 */
-#define L1_BRICKTYPE_IP41       0x35            /* 5 */
-#define L1_BRICKTYPE_TWISTER    0x36            /* 6 */ /* IP53 & ROUTER */
-#define L1_BRICKTYPE_IX         0x3d            /* = */
-#define L1_BRICKTYPE_IP34       0x61            /* a */
-#define L1_BRICKTYPE_GA		0x62            /* b */
-#define L1_BRICKTYPE_C          0x63            /* c */
-#define L1_BRICKTYPE_OPUS_TIO	0x66		/* f */
-#define L1_BRICKTYPE_I          0x69            /* i */
-#define L1_BRICKTYPE_N          0x6e            /* n */
-#define L1_BRICKTYPE_OPUS       0x6f		/* o */
-#define L1_BRICKTYPE_P          0x70            /* p */
-#define L1_BRICKTYPE_R          0x72            /* r */
-#define L1_BRICKTYPE_CHI_CG     0x76            /* v */
-#define L1_BRICKTYPE_X          0x78            /* x */
-#define L1_BRICKTYPE_X2         0x79            /* y */
-#define L1_BRICKTYPE_SA		0x5e            /* ^ */
-#define L1_BRICKTYPE_PA		0x6a            /* j */
-#define L1_BRICKTYPE_IA		0x6b            /* k */
-#define L1_BRICKTYPE_ATHENA	0x2b            /* + */
-#define L1_BRICKTYPE_DAYTONA	0x7a            /* z */
-#define L1_BRICKTYPE_1932	0x2c		/* . */
-#define L1_BRICKTYPE_191010	0x2e		/* , */
-
-/* board type response codes */
-#define L1_BOARDTYPE_IP69       0x0100          /* CA */
-#define L1_BOARDTYPE_IP63       0x0200          /* CB */
-#define L1_BOARDTYPE_BASEIO     0x0300          /* IB */
-#define L1_BOARDTYPE_PCIE2SLOT  0x0400          /* IC */
-#define L1_BOARDTYPE_PCIX3SLOT  0x0500          /* ID */
-#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600       /* IE */
-#define L1_BOARDTYPE_ABACUS     0x0700          /* AB */
-#define L1_BOARDTYPE_DAYTONA    0x0800          /* AD */
-#define L1_BOARDTYPE_INVAL      (-1)            /* invalid brick type */
-
-#endif /* _ASM_IA64_SN_L1_H */
diff --git a/include/asm-ia64/sn/leds.h b/include/asm-ia64/sn/leds.h
deleted file mode 100644
index 66cf8c4d92c9..000000000000
--- a/include/asm-ia64/sn/leds.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_LEDS_H
-#define _ASM_IA64_SN_LEDS_H
-
-#include <asm/sn/addrs.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/shub_mmr.h>
-
-#define LED0		(LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
-#define LED_CPU_SHIFT	16
-
-#define LED_CPU_HEARTBEAT	0x01
-#define LED_CPU_ACTIVITY	0x02
-#define LED_ALWAYS_SET		0x00
-
-/*
- * Basic macros for flashing the LEDS on an SGI SN.
- */
-
-static __inline__ void
-set_led_bits(u8 value, u8 mask)
-{
-	pda->led_state = (pda->led_state & ~mask) | (value & mask);
-	*pda->led_address = (short) pda->led_state;
-}
-
-#endif /* _ASM_IA64_SN_LEDS_H */
-
diff --git a/include/asm-ia64/sn/module.h b/include/asm-ia64/sn/module.h
deleted file mode 100644
index 734e980ece2f..000000000000
--- a/include/asm-ia64/sn/module.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_MODULE_H
-#define _ASM_IA64_SN_MODULE_H
-
-/* parameter for format_module_id() */
-#define MODULE_FORMAT_BRIEF	1
-#define MODULE_FORMAT_LONG	2
-#define MODULE_FORMAT_LCD	3
-
-/*
- *	Module id format
- *
- *	31-16	Rack ID (encoded class, group, number - 16-bit unsigned int)
- *	 15-8	Brick type (8-bit ascii character)
- *	  7-0	Bay (brick position in rack (0-63) - 8-bit unsigned int)
- *
- */
-
-/*
- * Macros for getting the brick type
- */
-#define MODULE_BTYPE_MASK	0xff00
-#define MODULE_BTYPE_SHFT	8
-#define MODULE_GET_BTYPE(_m)	(((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
-#define MODULE_BT_TO_CHAR(_b)	((char)(_b))
-#define MODULE_GET_BTCHAR(_m)	(MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
-
-/*
- * Macros for getting the rack ID.
- */
-#define MODULE_RACK_MASK	0xffff0000
-#define MODULE_RACK_SHFT	16
-#define MODULE_GET_RACK(_m)	(((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
-
-/*
- * Macros for getting the brick position
- */
-#define MODULE_BPOS_MASK	0x00ff
-#define MODULE_BPOS_SHFT	0
-#define MODULE_GET_BPOS(_m)	(((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
-
-/*
- * Macros for encoding and decoding rack IDs
- * A rack number consists of three parts:
- *   class (0==CPU/mixed, 1==I/O), group, number
- *
- * Rack number is stored just as it is displayed on the screen:
- * a 3-decimal-digit number.
- */
-#define RACK_CLASS_DVDR         100
-#define RACK_GROUP_DVDR         10
-#define RACK_NUM_DVDR           1
-
-#define RACK_CREATE_RACKID(_c, _g, _n)  ((_c) * RACK_CLASS_DVDR +       \
-        (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
-
-#define RACK_GET_CLASS(_r)              ((_r) / RACK_CLASS_DVDR)
-#define RACK_GET_GROUP(_r)              (((_r) - RACK_GET_CLASS(_r) *   \
-            RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
-#define RACK_GET_NUM(_r)                (((_r) - RACK_GET_CLASS(_r) *   \
-            RACK_CLASS_DVDR - RACK_GET_GROUP(_r) *      \
-            RACK_GROUP_DVDR) / RACK_NUM_DVDR)
-
-/*
- * Macros for encoding and decoding rack IDs
- * A rack number consists of three parts:
- *   class      1 bit, 0==CPU/mixed, 1==I/O
- *   group      2 bits for CPU/mixed, 3 bits for I/O
- *   number     3 bits for CPU/mixed, 2 bits for I/O (1 based)
- */
-#define RACK_GROUP_BITS(_r)     (RACK_GET_CLASS(_r) ? 3 : 2)
-#define RACK_NUM_BITS(_r)       (RACK_GET_CLASS(_r) ? 2 : 3)
-
-#define RACK_CLASS_MASK(_r)     0x20
-#define RACK_CLASS_SHFT(_r)     5
-#define RACK_ADD_CLASS(_r, _c)  \
-        ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
-
-#define RACK_GROUP_SHFT(_r)     RACK_NUM_BITS(_r)
-#define RACK_GROUP_MASK(_r)     \
-        ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
-#define RACK_ADD_GROUP(_r, _g)  \
-        ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
-
-#define RACK_NUM_SHFT(_r)       0
-#define RACK_NUM_MASK(_r)       \
-        ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
-#define RACK_ADD_NUM(_r, _n)    \
-        ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
-
-
-/*
- * Brick type definitions
- */
-#define MAX_BRICK_TYPES         256 /* brick type is stored as uchar */
-
-extern char brick_types[];
-
-#define MODULE_CBRICK           0
-#define MODULE_RBRICK           1
-#define MODULE_IBRICK           2
-#define MODULE_KBRICK           3
-#define MODULE_XBRICK           4
-#define MODULE_DBRICK           5
-#define MODULE_PBRICK           6
-#define MODULE_NBRICK           7
-#define MODULE_PEBRICK          8
-#define MODULE_PXBRICK          9
-#define MODULE_IXBRICK          10
-#define MODULE_CGBRICK		11
-#define MODULE_OPUSBRICK        12
-#define MODULE_SABRICK		13	/* TIO BringUp Brick */
-#define MODULE_IABRICK		14
-#define MODULE_PABRICK		15
-#define MODULE_GABRICK		16
-#define MODULE_OPUS_TIO		17	/* OPUS TIO Riser */
-
-extern char brick_types[];
-extern void format_module_id(char *, moduleid_t, int);
-
-#endif /* _ASM_IA64_SN_MODULE_H */
diff --git a/include/asm-ia64/sn/mspec.h b/include/asm-ia64/sn/mspec.h
deleted file mode 100644
index dbe13c6121a8..000000000000
--- a/include/asm-ia64/sn/mspec.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_MSPEC_H
-#define _ASM_IA64_SN_MSPEC_H
-
-#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
-
-#define FETCHOP_LOAD		0
-#define FETCHOP_INCREMENT	8
-#define FETCHOP_DECREMENT	16
-#define FETCHOP_CLEAR		24
-
-#define FETCHOP_STORE		0
-#define FETCHOP_AND		24
-#define FETCHOP_OR		32
-
-#define FETCHOP_CLEAR_CACHE	56
-
-#define FETCHOP_LOAD_OP(addr, op) ( \
-         *(volatile long *)((char*) (addr) + (op)))
-
-#define FETCHOP_STORE_OP(addr, op, x) ( \
-         *(volatile long *)((char*) (addr) + (op)) = (long) (x))
-
-#ifdef __KERNEL__
-
-/*
- * Each Atomic Memory Operation (AMO formerly known as fetchop)
- * variable is 64 bytes long.  The first 8 bytes are used.  The
- * remaining 56 bytes are unaddressable due to the operation taking
- * that portion of the address.
- *
- * NOTE: The AMO_t _MUST_ be placed in either the first or second half
- * of the cache line.  The cache line _MUST NOT_ be used for anything
- * other than additional AMO_t entries.  This is because there are two
- * addresses which reference the same physical cache line.  One will
- * be a cached entry with the memory type bits all set.  This address
- * may be loaded into processor cache.  The AMO_t will be referenced
- * uncached via the memory special memory type.  If any portion of the
- * cached cache-line is modified, when that line is flushed, it will
- * overwrite the uncached value in physical memory and lead to
- * inconsistency.
- */
-typedef struct {
-        u64 variable;
-        u64 unused[7];
-} AMO_t;
-
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IA64_SN_MSPEC_H */
diff --git a/include/asm-ia64/sn/nodepda.h b/include/asm-ia64/sn/nodepda.h
deleted file mode 100644
index ee118b901de4..000000000000
--- a/include/asm-ia64/sn/nodepda.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_NODEPDA_H
-#define _ASM_IA64_SN_NODEPDA_H
-
-
-#include <asm/irq.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/bte.h>
-
-/*
- * NUMA Node-Specific Data structures are defined in this file.
- * In particular, this is the location of the node PDA.
- * A pointer to the right node PDA is saved in each CPU PDA.
- */
-
-/*
- * Node-specific data structure.
- *
- * One of these structures is allocated on each node of a NUMA system.
- *
- * This structure provides a convenient way of keeping together 
- * all per-node data structures. 
- */
-struct phys_cpuid {
-	short			nasid;
-	char			subnode;
-	char			slice;
-};
-
-struct nodepda_s {
-	void 		*pdinfo;	/* Platform-dependent per-node info */
-
-	/*
-	 * The BTEs on this node are shared by the local cpus
-	 */
-	struct bteinfo_s	bte_if[MAX_BTES_PER_NODE];	/* Virtual Interface */
-	struct timer_list	bte_recovery_timer;
-	spinlock_t		bte_recovery_lock;
-
-	/* 
-	 * Array of pointers to the nodepdas for each node.
-	 */
-	struct nodepda_s	*pernode_pdaindr[MAX_COMPACT_NODES]; 
-
-	/*
-	 * Array of physical cpu identifiers. Indexed by cpuid.
-	 */
-	struct phys_cpuid	phys_cpuid[NR_CPUS];
-	spinlock_t		ptc_lock ____cacheline_aligned_in_smp;
-};
-
-typedef struct nodepda_s nodepda_t;
-
-/*
- * Access Functions for node PDA.
- * Since there is one nodepda for each node, we need a convenient mechanism
- * to access these nodepdas without cluttering code with #ifdefs.
- * The next set of definitions provides this.
- * Routines are expected to use 
- *
- *	sn_nodepda   - to access node PDA for the node on which code is running
- *	NODEPDA(cnodeid)   - to access node PDA for cnodeid
- */
-
-DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda);
-#define sn_nodepda		(__get_cpu_var(__sn_nodepda))
-#define	NODEPDA(cnodeid)	(sn_nodepda->pernode_pdaindr[cnodeid])
-
-/*
- * Check if given a compact node id the corresponding node has all the
- * cpus disabled. 
- */
-#define is_headless_node(cnodeid)	(nr_cpus_node(cnodeid) == 0)
-
-#endif /* _ASM_IA64_SN_NODEPDA_H */
diff --git a/include/asm-ia64/sn/pcibr_provider.h b/include/asm-ia64/sn/pcibr_provider.h
deleted file mode 100644
index da205b7cdaac..000000000000
--- a/include/asm-ia64/sn/pcibr_provider.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
-#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
-
-#include <asm/sn/intr.h>
-#include <asm/sn/pcibus_provider_defs.h>
-
-/* Workarounds */
-#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */
-
-#define BUSTYPE_MASK                    0x1
-
-/* Macros given a pcibus structure */
-#define IS_PCIX(ps)     ((ps)->pbi_bridge_mode & BUSTYPE_MASK)
-#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \
-                asic == PCIIO_ASIC_TYPE_TIOCP)
-#define IS_PIC_SOFT(ps)     (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC)
-#define IS_TIOCP_SOFT(ps)   (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP)
-
-
-/*
- * The different PCI Bridge types supported on the SGI Altix platforms
- */
-#define PCIBR_BRIDGETYPE_UNKNOWN       -1
-#define PCIBR_BRIDGETYPE_PIC            2
-#define PCIBR_BRIDGETYPE_TIOCP          3
-
-/*
- * Bridge 64bit Direct Map Attributes
- */
-#define PCI64_ATTR_PREF                 (1ull << 59)
-#define PCI64_ATTR_PREC                 (1ull << 58)
-#define PCI64_ATTR_VIRTUAL              (1ull << 57)
-#define PCI64_ATTR_BAR                  (1ull << 56)
-#define PCI64_ATTR_SWAP                 (1ull << 55)
-#define PCI64_ATTR_VIRTUAL1             (1ull << 54)
-
-#define PCI32_LOCAL_BASE                0
-#define PCI32_MAPPED_BASE               0x40000000
-#define PCI32_DIRECT_BASE               0x80000000
-
-#define IS_PCI32_MAPPED(x)              ((u64)(x) < PCI32_DIRECT_BASE && \
-                                         (u64)(x) >= PCI32_MAPPED_BASE)
-#define IS_PCI32_DIRECT(x)              ((u64)(x) >= PCI32_MAPPED_BASE)
-
-
-/*
- * Bridge PMU Address Transaltion Entry Attibutes
- */
-#define PCI32_ATE_V                     (0x1 << 0)
-#define PCI32_ATE_CO                    (0x1 << 1)	/* PIC ASIC ONLY */
-#define PCI32_ATE_PIO                   (0x1 << 1)	/* TIOCP ASIC ONLY */
-#define PCI32_ATE_MSI                   (0x1 << 2)
-#define PCI32_ATE_PREF                  (0x1 << 3)
-#define PCI32_ATE_BAR                   (0x1 << 4)
-#define PCI32_ATE_ADDR_SHFT             12
-
-#define MINIMAL_ATES_REQUIRED(addr, size) \
-	(IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1))
-
-#define MINIMAL_ATE_FLAG(addr, size) \
-	(MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0)
-
-/* bit 29 of the pci address is the SWAP bit */
-#define ATE_SWAPSHIFT                   29
-#define ATE_SWAP_ON(x)                  ((x) |= (1 << ATE_SWAPSHIFT))
-#define ATE_SWAP_OFF(x)                 ((x) &= ~(1 << ATE_SWAPSHIFT))
-
-/*
- * I/O page size
- */
-#if PAGE_SIZE < 16384
-#define IOPFNSHIFT                      12      /* 4K per mapped page */
-#else
-#define IOPFNSHIFT                      14      /* 16K per mapped page */
-#endif
-
-#define IOPGSIZE                        (1 << IOPFNSHIFT)
-#define IOPG(x)                         ((x) >> IOPFNSHIFT)
-#define IOPGOFF(x)                      ((x) & (IOPGSIZE-1))
-
-#define PCIBR_DEV_SWAP_DIR              (1ull << 19)
-#define PCIBR_CTRL_PAGE_SIZE            (0x1 << 21)
-
-/*
- * PMU resources.
- */
-struct ate_resource{
-	u64 *ate;
-	u64 num_ate;
-	u64 lowest_free_index;
-};
-
-struct pcibus_info {
-	struct pcibus_bussoft	pbi_buscommon;   /* common header */
-	u32                pbi_moduleid;
-	short                   pbi_bridge_type;
-	short                   pbi_bridge_mode;
-
-	struct ate_resource     pbi_int_ate_resource;
-	u64                pbi_int_ate_size;
-
-	u64                pbi_dir_xbase;
-	char                    pbi_hub_xid;
-
-	u64                pbi_devreg[8];
-
-	u32		pbi_valid_devices;
-	u32		pbi_enabled_devices;
-
-	spinlock_t              pbi_lock;
-};
-
-extern int  pcibr_init_provider(void);
-extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *);
-extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type);
-extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type);
-extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
-
-/*
- * prototypes for the bridge asic register access routines in pcibr_reg.c
- */
-extern void             pcireg_control_bit_clr(struct pcibus_info *, u64);
-extern void             pcireg_control_bit_set(struct pcibus_info *, u64);
-extern u64         pcireg_tflush_get(struct pcibus_info *);
-extern u64         pcireg_intr_status_get(struct pcibus_info *);
-extern void             pcireg_intr_enable_bit_clr(struct pcibus_info *, u64);
-extern void             pcireg_intr_enable_bit_set(struct pcibus_info *, u64);
-extern void             pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64);
-extern void             pcireg_force_intr_set(struct pcibus_info *, int);
-extern u64         pcireg_wrb_flush_get(struct pcibus_info *, int);
-extern void             pcireg_int_ate_set(struct pcibus_info *, int, u64);
-extern u64 __iomem *	pcireg_int_ate_addr(struct pcibus_info *, int);
-extern void 		pcibr_force_interrupt(struct sn_irq_info *sn_irq_info);
-extern void 		pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
-extern int 		pcibr_ate_alloc(struct pcibus_info *, int);
-extern void 		pcibr_ate_free(struct pcibus_info *, int);
-extern void 		ate_write(struct pcibus_info *, int, int, u64);
-extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
-				 void *resp, char **ssdt);
-extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
-				  int action, void *resp);
-extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
-#endif
diff --git a/include/asm-ia64/sn/pcibus_provider_defs.h b/include/asm-ia64/sn/pcibus_provider_defs.h
deleted file mode 100644
index 8f7c83d0f6d3..000000000000
--- a/include/asm-ia64/sn/pcibus_provider_defs.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
-#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
-
-/*
- * SN pci asic types.  Do not ever renumber these or reuse values.  The
- * values must agree with what prom thinks they are.
- */
-
-#define PCIIO_ASIC_TYPE_UNKNOWN	0
-#define PCIIO_ASIC_TYPE_PPB	1
-#define PCIIO_ASIC_TYPE_PIC	2
-#define PCIIO_ASIC_TYPE_TIOCP	3
-#define PCIIO_ASIC_TYPE_TIOCA	4
-#define PCIIO_ASIC_TYPE_TIOCE	5
-
-#define PCIIO_ASIC_MAX_TYPES	6
-
-/*
- * Common pciio bus provider data.  There should be one of these as the
- * first field in any pciio based provider soft structure (e.g. pcibr_soft
- * tioca_soft, etc).
- */
-
-struct pcibus_bussoft {
-	u32		bs_asic_type;	/* chipset type */
-	u32		bs_xid;		/* xwidget id */
-	u32		bs_persist_busnum; /* Persistent Bus Number */
-	u32		bs_persist_segment; /* Segment Number */
-	u64		bs_legacy_io;	/* legacy io pio addr */
-	u64		bs_legacy_mem;	/* legacy mem pio addr */
-	u64		bs_base;	/* widget base */
-	struct xwidget_info	*bs_xwidget_info;
-};
-
-struct pci_controller;
-/*
- * SN pci bus indirection
- */
-
-struct sn_pcibus_provider {
-	dma_addr_t	(*dma_map)(struct pci_dev *, unsigned long, size_t, int flags);
-	dma_addr_t	(*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags);
-	void		(*dma_unmap)(struct pci_dev *, dma_addr_t, int);
-	void *		(*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *);
- 	void		(*force_interrupt)(struct sn_irq_info *);
- 	void		(*target_interrupt)(struct sn_irq_info *);
-};
-
-/*
- * Flags used by the map interfaces
- * bits 3:0 specifies format of passed in address
- * bit  4   specifies that address is to be used for MSI
- */
-
-#define SN_DMA_ADDRTYPE(x)	((x) & 0xf)
-#define     SN_DMA_ADDR_PHYS	1	/* address is an xio address. */
-#define     SN_DMA_ADDR_XIO	2	/* address is phys memory */
-#define SN_DMA_MSI		0x10	/* Bus address is to be used for MSI */
-
-extern struct sn_pcibus_provider *sn_pci_provider[];
-#endif				/* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */
diff --git a/include/asm-ia64/sn/pcidev.h b/include/asm-ia64/sn/pcidev.h
deleted file mode 100644
index 1c2382cea807..000000000000
--- a/include/asm-ia64/sn/pcidev.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIDEV_H
-#define _ASM_IA64_SN_PCI_PCIDEV_H
-
-#include <linux/pci.h>
-
-/*
- * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to
- * the pcidev_info structs for all devices under a controller, we keep a
- * list of pcidev_info under pci_controller->platform_data.
- */
-struct sn_platform_data {
-	void *provider_soft;
-	struct list_head pcidev_info;
-};
-
-#define SN_PLATFORM_DATA(busdev) \
-	((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data))
-
-#define SN_PCIDEV_INFO(dev)	sn_pcidev_info_get(dev)
-
-/*
- * Given a pci_bus, return the sn pcibus_bussoft struct.  Note that
- * this only works for root busses, not for busses represented by PPB's.
- */
-
-#define SN_PCIBUS_BUSSOFT(pci_bus) \
-	((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
-
-#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
-	((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
-/*
- * Given a struct pci_dev, return the sn pcibus_bussoft struct.  Note
- * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
- * due to possible PPB's in the path.
- */
-
-#define SN_PCIDEV_BUSSOFT(pci_dev) \
-	(SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info)
-
-#define SN_PCIDEV_BUSPROVIDER(pci_dev) \
-	(SN_PCIDEV_INFO(pci_dev)->pdi_provider)
-
-#define PCIIO_BUS_NONE	255      /* bus 255 reserved */
-#define PCIIO_SLOT_NONE 255
-#define PCIIO_FUNC_NONE 255
-#define PCIIO_VENDOR_ID_NONE	(-1)
-
-struct pcidev_info {
-	u64		pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
-	u64		pdi_slot_host_handle;	/* Bus and devfn Host pci_dev */
-
-	struct pcibus_bussoft	*pdi_pcibus_info;	/* Kernel common bus soft */
-	struct pcidev_info	*pdi_host_pcidev_info;	/* Kernel Host pci_dev */
-	struct pci_dev		*pdi_linux_pcidev;	/* Kernel pci_dev */
-
-	struct sn_irq_info	*pdi_sn_irq_info;
-	struct sn_pcibus_provider *pdi_provider;	/* sn pci ops */
-	struct pci_dev 		*host_pci_dev;		/* host bus link */
-	struct list_head	pdi_list;		/* List of pcidev_info */
-};
-
-extern void sn_irq_fixup(struct pci_dev *pci_dev,
-			 struct sn_irq_info *sn_irq_info);
-extern void sn_irq_unfixup(struct pci_dev *pci_dev);
-extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
-extern void sn_bus_fixup(struct pci_bus *);
-extern void sn_acpi_bus_fixup(struct pci_bus *);
-extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
-extern void sn_bus_store_sysdata(struct pci_dev *dev);
-extern void sn_bus_free_sysdata(void);
-extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
-extern void sn_io_slot_fixup(struct pci_dev *);
-extern void sn_acpi_slot_fixup(struct pci_dev *);
-extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
-			      struct sn_irq_info *);
-extern void sn_pci_unfixup_slot(struct pci_dev *dev);
-extern void sn_irq_lh_init(void);
-#endif				/* _ASM_IA64_SN_PCI_PCIDEV_H */
diff --git a/include/asm-ia64/sn/pda.h b/include/asm-ia64/sn/pda.h
deleted file mode 100644
index 1c5108d44d8b..000000000000
--- a/include/asm-ia64/sn/pda.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PDA_H
-#define _ASM_IA64_SN_PDA_H
-
-#include <linux/cache.h>
-#include <asm/percpu.h>
-#include <asm/system.h>
-
-
-/*
- * CPU-specific data structure.
- *
- * One of these structures is allocated for each cpu of a NUMA system.
- *
- * This structure provides a convenient way of keeping together 
- * all SN per-cpu data structures. 
- */
-
-typedef struct pda_s {
-
-	/*
-	 * Support for SN LEDs
-	 */
-	volatile short	*led_address;
-	u8		led_state;
-	u8		hb_state;	/* supports blinking heartbeat leds */
-	unsigned int	hb_count;
-
-	unsigned int	idle_flag;
-	
-	volatile unsigned long *bedrock_rev_id;
-	volatile unsigned long *pio_write_status_addr;
-	unsigned long pio_write_status_val;
-	volatile unsigned long *pio_shub_war_cam_addr;
-
-	unsigned long	sn_in_service_ivecs[4];
-	int		sn_lb_int_war_ticks;
-	int		sn_last_irq;
-	int		sn_first_irq;
-} pda_t;
-
-
-#define CACHE_ALIGN(x)	(((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
-
-/*
- * PDA
- * Per-cpu private data area for each cpu. The PDA is located immediately after
- * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
- * cpu but only a small amout of the page is actually used. We put the SNIA PDA
- * in the same page as the cpu_data area. Note that there is a check in the setup
- * code to verify that we don't overflow the page.
- *
- * Seems like we should should cache-line align the pda so that any changes in the
- * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
- * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
- */
-DECLARE_PER_CPU(struct pda_s, pda_percpu);
-
-#define pda		(&__ia64_per_cpu_var(pda_percpu))
-
-#define pdacpu(cpu)	(&per_cpu(pda_percpu, cpu))
-
-#endif /* _ASM_IA64_SN_PDA_H */
diff --git a/include/asm-ia64/sn/pic.h b/include/asm-ia64/sn/pic.h
deleted file mode 100644
index 5f9da5fd6e56..000000000000
--- a/include/asm-ia64/sn/pic.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PIC_H
-#define _ASM_IA64_SN_PCI_PIC_H
-
-/*
- * PIC AS DEVICE ZERO
- * ------------------
- *
- * PIC handles PCI/X busses.  PCI/X requires that the 'bridge' (i.e. PIC)
- * be designated as 'device 0'.   That is a departure from earlier SGI
- * PCI bridges.  Because of that we use config space 1 to access the
- * config space of the first actual PCI device on the bus.
- * Here's what the PIC manual says:
- *
- *     The current PCI-X bus specification now defines that the parent
- *     hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC
- *     reduced the total number of devices from 8 to 4 and removed the
- *     device registers and windows, now only supporting devices 0,1,2, and
- *     3. PIC did leave all 8 configuration space windows. The reason was
- *     there was nothing to gain by removing them. Here in lies the problem.
- *     The device numbering we do using 0 through 3 is unrelated to the device
- *     numbering which PCI-X requires in configuration space. In the past we
- *     correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc.
- *     PCI-X requires we start a 1, not 0 and currently the PX brick
- *     does associate our:
- *
- *         device 0 with configuration space window 1,
- *         device 1 with configuration space window 2,
- *         device 2 with configuration space window 3,
- *         device 3 with configuration space window 4.
- *
- * The net effect is that all config space access are off-by-one with
- * relation to other per-slot accesses on the PIC.
- * Here is a table that shows some of that:
- *
- *                               Internal Slot#
- *           |
- *           |     0         1        2         3
- * ----------|---------------------------------------
- * config    |  0x21000   0x22000  0x23000   0x24000
- *           |
- * even rrb  |  0[0]      n/a      1[0]      n/a	[] == implied even/odd
- *           |
- * odd rrb   |  n/a       0[1]     n/a       1[1]
- *           |
- * int dev   |  00       01        10        11
- *           |
- * ext slot# |  1        2         3         4
- * ----------|---------------------------------------
- */
-
-#define PIC_ATE_TARGETID_SHFT           8
-#define PIC_HOST_INTR_ADDR              0x0000FFFFFFFFFFFFUL
-#define PIC_PCI64_ATTR_TARG_SHFT        60
-
-
-/*****************************************************************************
- *********************** PIC MMR structure mapping ***************************
- *****************************************************************************/
-
-/* NOTE: PIC WAR. PV#854697.  PIC does not allow writes just to [31:0]
- * of a 64-bit register.  When writing PIC registers, always write the
- * entire 64 bits.
- */
-
-struct pic {
-
-    /* 0x000000-0x00FFFF -- Local Registers */
-
-    /* 0x000000-0x000057 -- Standard Widget Configuration */
-    u64		p_wid_id;			/* 0x000000 */
-    u64		p_wid_stat;			/* 0x000008 */
-    u64		p_wid_err_upper;		/* 0x000010 */
-    u64		p_wid_err_lower;		/* 0x000018 */
-    #define p_wid_err p_wid_err_lower
-    u64		p_wid_control;			/* 0x000020 */
-    u64		p_wid_req_timeout;		/* 0x000028 */
-    u64		p_wid_int_upper;		/* 0x000030 */
-    u64		p_wid_int_lower;		/* 0x000038 */
-    #define p_wid_int p_wid_int_lower
-    u64		p_wid_err_cmdword;		/* 0x000040 */
-    u64		p_wid_llp;			/* 0x000048 */
-    u64		p_wid_tflush;			/* 0x000050 */
-
-    /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */
-    u64		p_wid_aux_err;			/* 0x000058 */
-    u64		p_wid_resp_upper;		/* 0x000060 */
-    u64		p_wid_resp_lower;		/* 0x000068 */
-    #define p_wid_resp p_wid_resp_lower
-    u64		p_wid_tst_pin_ctrl;		/* 0x000070 */
-    u64		p_wid_addr_lkerr;		/* 0x000078 */
-
-    /* 0x000080-0x00008F -- PMU & MAP */
-    u64		p_dir_map;			/* 0x000080 */
-    u64		_pad_000088;			/* 0x000088 */
-
-    /* 0x000090-0x00009F -- SSRAM */
-    u64		p_map_fault;			/* 0x000090 */
-    u64		_pad_000098;			/* 0x000098 */
-
-    /* 0x0000A0-0x0000AF -- Arbitration */
-    u64		p_arb;				/* 0x0000A0 */
-    u64		_pad_0000A8;			/* 0x0000A8 */
-
-    /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
-    u64		p_ate_parity_err;		/* 0x0000B0 */
-    u64		_pad_0000B8;			/* 0x0000B8 */
-
-    /* 0x0000C0-0x0000FF -- PCI/GIO */
-    u64		p_bus_timeout;			/* 0x0000C0 */
-    u64		p_pci_cfg;			/* 0x0000C8 */
-    u64		p_pci_err_upper;		/* 0x0000D0 */
-    u64		p_pci_err_lower;		/* 0x0000D8 */
-    #define p_pci_err p_pci_err_lower
-    u64		_pad_0000E0[4];			/* 0x0000{E0..F8} */
-
-    /* 0x000100-0x0001FF -- Interrupt */
-    u64		p_int_status;			/* 0x000100 */
-    u64		p_int_enable;			/* 0x000108 */
-    u64		p_int_rst_stat;			/* 0x000110 */
-    u64		p_int_mode;			/* 0x000118 */
-    u64		p_int_device;			/* 0x000120 */
-    u64		p_int_host_err;			/* 0x000128 */
-    u64		p_int_addr[8];			/* 0x0001{30,,,68} */
-    u64		p_err_int_view;			/* 0x000170 */
-    u64		p_mult_int;			/* 0x000178 */
-    u64		p_force_always[8];		/* 0x0001{80,,,B8} */
-    u64		p_force_pin[8];			/* 0x0001{C0,,,F8} */
-
-    /* 0x000200-0x000298 -- Device */
-    u64		p_device[4];			/* 0x0002{00,,,18} */
-    u64		_pad_000220[4];			/* 0x0002{20,,,38} */
-    u64		p_wr_req_buf[4];		/* 0x0002{40,,,58} */
-    u64		_pad_000260[4];			/* 0x0002{60,,,78} */
-    u64		p_rrb_map[2];			/* 0x0002{80,,,88} */
-    #define p_even_resp p_rrb_map[0]			/* 0x000280 */
-    #define p_odd_resp  p_rrb_map[1]			/* 0x000288 */
-    u64		p_resp_status;			/* 0x000290 */
-    u64		p_resp_clear;			/* 0x000298 */
-
-    u64		_pad_0002A0[12];		/* 0x0002{A0..F8} */
-
-    /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
-    struct {
-	u64	upper;				/* 0x0003{00,,,F0} */
-	u64	lower;				/* 0x0003{08,,,F8} */
-    } p_buf_addr_match[16];
-
-    /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
-    struct {
-	u64	flush_w_touch;			/* 0x000{400,,,5C0} */
-	u64	flush_wo_touch;			/* 0x000{408,,,5C8} */
-	u64	inflight;			/* 0x000{410,,,5D0} */
-	u64	prefetch;			/* 0x000{418,,,5D8} */
-	u64	total_pci_retry;		/* 0x000{420,,,5E0} */
-	u64	max_pci_retry;			/* 0x000{428,,,5E8} */
-	u64	max_latency;			/* 0x000{430,,,5F0} */
-	u64	clear_all;			/* 0x000{438,,,5F8} */
-    } p_buf_count[8];
-
-
-    /* 0x000600-0x0009FF -- PCI/X registers */
-    u64		p_pcix_bus_err_addr;		/* 0x000600 */
-    u64		p_pcix_bus_err_attr;		/* 0x000608 */
-    u64		p_pcix_bus_err_data;		/* 0x000610 */
-    u64		p_pcix_pio_split_addr;		/* 0x000618 */
-    u64		p_pcix_pio_split_attr;		/* 0x000620 */
-    u64		p_pcix_dma_req_err_attr;	/* 0x000628 */
-    u64		p_pcix_dma_req_err_addr;	/* 0x000630 */
-    u64		p_pcix_timeout;			/* 0x000638 */
-
-    u64		_pad_000640[120];		/* 0x000{640,,,9F8} */
-
-    /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
-    struct {
-	u64	p_buf_addr;			/* 0x000{A00,,,AF0} */
-	u64	p_buf_attr;			/* 0X000{A08,,,AF8} */
-    } p_pcix_read_buf_64[16];
-
-    struct {
-	u64	p_buf_addr;			/* 0x000{B00,,,BE0} */
-	u64	p_buf_attr;			/* 0x000{B08,,,BE8} */
-	u64	p_buf_valid;			/* 0x000{B10,,,BF0} */
-	u64	__pad1;				/* 0x000{B18,,,BF8} */
-    } p_pcix_write_buf_64[8];
-
-    /* End of Local Registers -- Start of Address Map space */
-
-    char		_pad_000c00[0x010000 - 0x000c00];
-
-    /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */
-    u64		p_int_ate_ram[1024];		/* 0x010000-0x011fff */
-
-    /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */
-    u64		p_int_ate_ram_mp[1024];		/* 0x012000-0x013fff */
-
-    char		_pad_014000[0x18000 - 0x014000];
-
-    /* 0x18000-0x197F8 -- PIC Write Request Ram */
-    u64		p_wr_req_lower[256];		/* 0x18000 - 0x187F8 */
-    u64		p_wr_req_upper[256];		/* 0x18800 - 0x18FF8 */
-    u64		p_wr_req_parity[256];		/* 0x19000 - 0x197F8 */
-
-    char		_pad_019800[0x20000 - 0x019800];
-
-    /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */
-    union {
-	u8		c[0x1000 / 1];			/* 0x02{0000,,,7FFF} */
-	u16	s[0x1000 / 2];			/* 0x02{0000,,,7FFF} */
-	u32	l[0x1000 / 4];			/* 0x02{0000,,,7FFF} */
-	u64	d[0x1000 / 8];			/* 0x02{0000,,,7FFF} */
-	union {
-	    u8	c[0x100 / 1];
-	    u16	s[0x100 / 2];
-	    u32	l[0x100 / 4];
-	    u64	d[0x100 / 8];
-	} f[8];
-    } p_type0_cfg_dev[8];				/* 0x02{0000,,,7FFF} */
-
-    /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
-    union {
-	u8		c[0x1000 / 1];			/* 0x028000-0x029000 */
-	u16	s[0x1000 / 2];			/* 0x028000-0x029000 */
-	u32	l[0x1000 / 4];			/* 0x028000-0x029000 */
-	u64	d[0x1000 / 8];			/* 0x028000-0x029000 */
-	union {
-	    u8	c[0x100 / 1];
-	    u16	s[0x100 / 2];
-	    u32	l[0x100 / 4];
-	    u64	d[0x100 / 8];
-	} f[8];
-    } p_type1_cfg;					/* 0x028000-0x029000 */
-
-    char		_pad_029000[0x030000-0x029000];
-
-    /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
-    union {
-	u8		c[8 / 1];
-	u16	s[8 / 2];
-	u32	l[8 / 4];
-	u64	d[8 / 8];
-    } p_pci_iack;					/* 0x030000-0x030007 */
-
-    char		_pad_030007[0x040000-0x030008];
-
-    /* 0x040000-0x030007 -- PCIX Special Cycle */
-    union {
-	u8		c[8 / 1];
-	u16	s[8 / 2];
-	u32	l[8 / 4];
-	u64	d[8 / 8];
-    } p_pcix_cycle;					/* 0x040000-0x040007 */
-};
-
-#endif                          /* _ASM_IA64_SN_PCI_PIC_H */
diff --git a/include/asm-ia64/sn/rw_mmr.h b/include/asm-ia64/sn/rw_mmr.h
deleted file mode 100644
index 2d78f4c5a45e..000000000000
--- a/include/asm-ia64/sn/rw_mmr.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002-2006 Silicon Graphics, Inc.  All Rights Reserved.
- */
-#ifndef _ASM_IA64_SN_RW_MMR_H
-#define _ASM_IA64_SN_RW_MMR_H
-
-
-/*
- * This file that access MMRs via uncached physical addresses.
- * 	pio_phys_read_mmr  - read an MMR
- * 	pio_phys_write_mmr - write an MMR
- * 	pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
- *		Second MMR will be skipped if address is NULL
- *
- * Addresses passed to these routines should be uncached physical addresses
- * ie., 0x80000....
- */
-
-
-extern long pio_phys_read_mmr(volatile long *mmr); 
-extern void pio_phys_write_mmr(volatile long *mmr, long val);
-extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2); 
-
-#endif /* _ASM_IA64_SN_RW_MMR_H */
diff --git a/include/asm-ia64/sn/shub_mmr.h b/include/asm-ia64/sn/shub_mmr.h
deleted file mode 100644
index 7de1d1d4b71a..000000000000
--- a/include/asm-ia64/sn/shub_mmr.h
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2005 Silicon Graphics, Inc.  All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SHUB_MMR_H
-#define _ASM_IA64_SN_SHUB_MMR_H
-
-/* ==================================================================== */
-/*                        Register "SH_IPI_INT"                         */
-/*               SHub Inter-Processor Interrupt Registers               */
-/* ==================================================================== */
-#define SH1_IPI_INT			__IA64_UL_CONST(0x0000000110000380)
-#define SH2_IPI_INT			__IA64_UL_CONST(0x0000000010000380)
-
-/*   SH_IPI_INT_TYPE                                                    */
-/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_IPI_INT_TYPE_SHFT				0
-#define SH_IPI_INT_TYPE_MASK		__IA64_UL_CONST(0x0000000000000007)
-
-/*   SH_IPI_INT_AGT                                                     */
-/*   Description:  Agent, must be 0 for SHub                            */
-#define SH_IPI_INT_AGT_SHFT				3
-#define SH_IPI_INT_AGT_MASK		__IA64_UL_CONST(0x0000000000000008)
-
-/*   SH_IPI_INT_PID                                                     */
-/*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_IPI_INT_PID_SHFT                      	4
-#define SH_IPI_INT_PID_MASK		__IA64_UL_CONST(0x00000000000ffff0)
-
-/*   SH_IPI_INT_BASE                                                    */
-/*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_IPI_INT_BASE_SHFT				21
-#define SH_IPI_INT_BASE_MASK 		__IA64_UL_CONST(0x0003ffffffe00000)
-
-/*   SH_IPI_INT_IDX                                                     */
-/*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_IPI_INT_IDX_SHFT				52
-#define SH_IPI_INT_IDX_MASK		__IA64_UL_CONST(0x0ff0000000000000)
-
-/*   SH_IPI_INT_SEND                                                    */
-/*   Description:  Send Interrupt Message to PI, This generates a puls  */
-#define SH_IPI_INT_SEND_SHFT				63
-#define SH_IPI_INT_SEND_MASK		__IA64_UL_CONST(0x8000000000000000)
-
-/* ==================================================================== */
-/*                     Register "SH_EVENT_OCCURRED"                     */
-/*                    SHub Interrupt Event Occurred                     */
-/* ==================================================================== */
-#define SH1_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000110010000)
-#define SH1_EVENT_OCCURRED_ALIAS	__IA64_UL_CONST(0x0000000110010008)
-#define SH2_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000010010000)
-#define SH2_EVENT_OCCURRED_ALIAS 	__IA64_UL_CONST(0x0000000010010008)
-
-/* ==================================================================== */
-/*                     Register "SH_PI_CAM_CONTROL"                     */
-/*                      CRB CAM MMR Access Control                      */
-/* ==================================================================== */
-#define SH1_PI_CAM_CONTROL		__IA64_UL_CONST(0x0000000120050300)
-
-/* ==================================================================== */
-/*                        Register "SH_SHUB_ID"                         */
-/*                            SHub ID Number                            */
-/* ==================================================================== */
-#define SH1_SHUB_ID			__IA64_UL_CONST(0x0000000110060580)
-#define SH1_SHUB_ID_REVISION_SHFT			28
-#define SH1_SHUB_ID_REVISION_MASK	__IA64_UL_CONST(0x00000000f0000000)
-
-/* ==================================================================== */
-/*                          Register "SH_RTC"                           */
-/*                           Real-time Clock                            */
-/* ==================================================================== */
-#define SH1_RTC				__IA64_UL_CONST(0x00000001101c0000)
-#define SH2_RTC				__IA64_UL_CONST(0x00000002101c0000)
-#define SH_RTC_MASK			__IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/*                   Register "SH_PIO_WRITE_STATUS_0|1"                 */
-/*                      PIO Write Status for CPU 0 & 1                  */
-/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000120070200)
-#define SH1_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000120070280)
-#define SH2_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000020070200)
-#define SH2_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000020070280)
-#define SH2_PIO_WRITE_STATUS_2		__IA64_UL_CONST(0x0000000020070300)
-#define SH2_PIO_WRITE_STATUS_3		__IA64_UL_CONST(0x0000000020070380)
-
-/*   SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK                               */
-/*   Description:  Deadlock response detected                           */
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT		1
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
-					__IA64_UL_CONST(0x0000000000000002)
-
-/*   SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT                          */
-/*   Description:  Count of currently pending PIO writes                */
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT	56
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
-					__IA64_UL_CONST(0x3f00000000000000)
-
-/* ==================================================================== */
-/*                Register "SH_PIO_WRITE_STATUS_0_ALIAS"                */
-/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000120070208)
-#define SH2_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000020070208)
-
-/* ==================================================================== */
-/*                     Register "SH_EVENT_OCCURRED"                     */
-/*                    SHub Interrupt Event Occurred                     */
-/* ==================================================================== */
-/*   SH_EVENT_OCCURRED_UART_INT                                         */
-/*   Description:  Pending Junk Bus UART Interrupt                      */
-#define SH_EVENT_OCCURRED_UART_INT_SHFT			20
-#define SH_EVENT_OCCURRED_UART_INT_MASK	__IA64_UL_CONST(0x0000000000100000)
-
-/*   SH_EVENT_OCCURRED_IPI_INT                                          */
-/*   Description:  Pending IPI Interrupt                                */
-#define SH_EVENT_OCCURRED_IPI_INT_SHFT			28
-#define SH_EVENT_OCCURRED_IPI_INT_MASK	__IA64_UL_CONST(0x0000000010000000)
-
-/*   SH_EVENT_OCCURRED_II_INT0                                          */
-/*   Description:  Pending II 0 Interrupt                               */
-#define SH_EVENT_OCCURRED_II_INT0_SHFT			29
-#define SH_EVENT_OCCURRED_II_INT0_MASK	__IA64_UL_CONST(0x0000000020000000)
-
-/*   SH_EVENT_OCCURRED_II_INT1                                          */
-/*   Description:  Pending II 1 Interrupt                               */
-#define SH_EVENT_OCCURRED_II_INT1_SHFT			30
-#define SH_EVENT_OCCURRED_II_INT1_MASK	__IA64_UL_CONST(0x0000000040000000)
-
-/*   SH2_EVENT_OCCURRED_EXTIO_INT2                                      */
-/*   Description:  Pending SHUB 2 EXT IO INT2                           */
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT		33
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)
-
-/*   SH2_EVENT_OCCURRED_EXTIO_INT3                                      */
-/*   Description:  Pending SHUB 2 EXT IO INT3                           */
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT		34
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)
-
-#define SH_ALL_INT_MASK \
-	(SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
-	 SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \
-	 SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \
-	 SH2_EVENT_OCCURRED_EXTIO_INT3_MASK)
-
-
-/* ==================================================================== */
-/*                         LEDS                                         */
-/* ==================================================================== */
-#define SH1_REAL_JUNK_BUS_LED0			0x7fed00000UL
-#define SH1_REAL_JUNK_BUS_LED1			0x7fed10000UL
-#define SH1_REAL_JUNK_BUS_LED2			0x7fed20000UL
-#define SH1_REAL_JUNK_BUS_LED3			0x7fed30000UL
-
-#define SH2_REAL_JUNK_BUS_LED0			0xf0000000UL
-#define SH2_REAL_JUNK_BUS_LED1			0xf0010000UL
-#define SH2_REAL_JUNK_BUS_LED2			0xf0020000UL
-#define SH2_REAL_JUNK_BUS_LED3			0xf0030000UL
-
-/* ==================================================================== */
-/*                         Register "SH1_PTC_0"                         */
-/*       Puge Translation Cache Message Configuration Information       */
-/* ==================================================================== */
-#define SH1_PTC_0			__IA64_UL_CONST(0x00000001101a0000)
-
-/*   SH1_PTC_0_A                                                        */
-/*   Description:  Type                                                 */
-#define SH1_PTC_0_A_SHFT				0
-
-/*   SH1_PTC_0_PS                                                       */
-/*   Description:  Page Size                                            */
-#define SH1_PTC_0_PS_SHFT				2
-
-/*   SH1_PTC_0_RID                                                      */
-/*   Description:  Region ID                                            */
-#define SH1_PTC_0_RID_SHFT				8
-
-/*   SH1_PTC_0_START                                                    */
-/*   Description:  Start                                                */
-#define SH1_PTC_0_START_SHFT				63
-
-/* ==================================================================== */
-/*                         Register "SH1_PTC_1"                         */
-/*       Puge Translation Cache Message Configuration Information       */
-/* ==================================================================== */
-#define SH1_PTC_1			__IA64_UL_CONST(0x00000001101a0080)
-
-/*   SH1_PTC_1_START                                                    */
-/*   Description:  PTC_1 Start                                          */
-#define SH1_PTC_1_START_SHFT				63
-
-/* ==================================================================== */
-/*                         Register "SH2_PTC"                           */
-/*       Puge Translation Cache Message Configuration Information       */
-/* ==================================================================== */
-#define SH2_PTC				__IA64_UL_CONST(0x0000000170000000)
-
-/*   SH2_PTC_A                                                          */
-/*   Description:  Type                                                 */
-#define SH2_PTC_A_SHFT					0
-
-/*   SH2_PTC_PS                                                         */
-/*   Description:  Page Size                                            */
-#define SH2_PTC_PS_SHFT					2
-
-/*   SH2_PTC_RID                                                      */
-/*   Description:  Region ID                                            */
-#define SH2_PTC_RID_SHFT				4
-
-/*   SH2_PTC_START                                                      */
-/*   Description:  Start                                                */
-#define SH2_PTC_START_SHFT				63
-
-/*   SH2_PTC_ADDR_RID                                                   */
-/*   Description:  Region ID                                            */
-#define SH2_PTC_ADDR_SHFT				4
-#define SH2_PTC_ADDR_MASK		__IA64_UL_CONST(0x1ffffffffffff000)
-
-/* ==================================================================== */
-/*                    Register "SH_RTC1_INT_CONFIG"                     */
-/*                SHub RTC 1 Interrupt Config Registers                 */
-/* ==================================================================== */
-
-#define SH1_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000110001480)
-#define SH2_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000010001480)
-#define SH_RTC1_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC1_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_RTC1_INT_CONFIG_TYPE                                            */
-/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_RTC1_INT_CONFIG_TYPE_SHFT			0
-#define SH_RTC1_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
-
-/*   SH_RTC1_INT_CONFIG_AGT                                             */
-/*   Description:  Agent, must be 0 for SHub                            */
-#define SH_RTC1_INT_CONFIG_AGT_SHFT			3
-#define SH_RTC1_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
-
-/*   SH_RTC1_INT_CONFIG_PID                                             */
-/*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_RTC1_INT_CONFIG_PID_SHFT			4
-#define SH_RTC1_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
-
-/*   SH_RTC1_INT_CONFIG_BASE                                            */
-/*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_RTC1_INT_CONFIG_BASE_SHFT			21
-#define SH_RTC1_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
-
-/*   SH_RTC1_INT_CONFIG_IDX                                             */
-/*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_RTC1_INT_CONFIG_IDX_SHFT			52
-#define SH_RTC1_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/*                    Register "SH_RTC1_INT_ENABLE"                     */
-/*                SHub RTC 1 Interrupt Enable Registers                 */
-/* ==================================================================== */
-
-#define SH1_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000110001500)
-#define SH2_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000010001500)
-#define SH_RTC1_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC1_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_RTC1_INT_ENABLE_RTC1_ENABLE                                     */
-/*   Description:  Enable RTC 1 Interrupt                               */
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT		0
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
-					__IA64_UL_CONST(0x0000000000000001)
-
-/* ==================================================================== */
-/*                    Register "SH_RTC2_INT_CONFIG"                     */
-/*                SHub RTC 2 Interrupt Config Registers                 */
-/* ==================================================================== */
-
-#define SH1_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000110001580)
-#define SH2_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000010001580)
-#define SH_RTC2_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC2_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_RTC2_INT_CONFIG_TYPE                                            */
-/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_RTC2_INT_CONFIG_TYPE_SHFT			0
-#define SH_RTC2_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
-
-/*   SH_RTC2_INT_CONFIG_AGT                                             */
-/*   Description:  Agent, must be 0 for SHub                            */
-#define SH_RTC2_INT_CONFIG_AGT_SHFT			3
-#define SH_RTC2_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
-
-/*   SH_RTC2_INT_CONFIG_PID                                             */
-/*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_RTC2_INT_CONFIG_PID_SHFT			4
-#define SH_RTC2_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
-
-/*   SH_RTC2_INT_CONFIG_BASE                                            */
-/*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_RTC2_INT_CONFIG_BASE_SHFT			21
-#define SH_RTC2_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
-
-/*   SH_RTC2_INT_CONFIG_IDX                                             */
-/*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_RTC2_INT_CONFIG_IDX_SHFT			52
-#define SH_RTC2_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/*                    Register "SH_RTC2_INT_ENABLE"                     */
-/*                SHub RTC 2 Interrupt Enable Registers                 */
-/* ==================================================================== */
-
-#define SH1_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000110001600)
-#define SH2_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000010001600)
-#define SH_RTC2_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC2_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_RTC2_INT_ENABLE_RTC2_ENABLE                                     */
-/*   Description:  Enable RTC 2 Interrupt                               */
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT		0
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
-					__IA64_UL_CONST(0x0000000000000001)
-
-/* ==================================================================== */
-/*                    Register "SH_RTC3_INT_CONFIG"                     */
-/*                SHub RTC 3 Interrupt Config Registers                 */
-/* ==================================================================== */
-
-#define SH1_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000110001680)
-#define SH2_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000010001680)
-#define SH_RTC3_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC3_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_RTC3_INT_CONFIG_TYPE                                            */
-/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
-#define SH_RTC3_INT_CONFIG_TYPE_SHFT			0
-#define SH_RTC3_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
-
-/*   SH_RTC3_INT_CONFIG_AGT                                             */
-/*   Description:  Agent, must be 0 for SHub                            */
-#define SH_RTC3_INT_CONFIG_AGT_SHFT			3
-#define SH_RTC3_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
-
-/*   SH_RTC3_INT_CONFIG_PID                                             */
-/*   Description:  Processor ID, same setting as on targeted McKinley  */
-#define SH_RTC3_INT_CONFIG_PID_SHFT			4
-#define SH_RTC3_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
-
-/*   SH_RTC3_INT_CONFIG_BASE                                            */
-/*   Description:  Optional interrupt vector area, 2MB aligned          */
-#define SH_RTC3_INT_CONFIG_BASE_SHFT			21
-#define SH_RTC3_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
-
-/*   SH_RTC3_INT_CONFIG_IDX                                             */
-/*   Description:  Targeted McKinley interrupt vector                   */
-#define SH_RTC3_INT_CONFIG_IDX_SHFT			52
-#define SH_RTC3_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/*                    Register "SH_RTC3_INT_ENABLE"                     */
-/*                SHub RTC 3 Interrupt Enable Registers                 */
-/* ==================================================================== */
-
-#define SH1_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000110001700)
-#define SH2_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000010001700)
-#define SH_RTC3_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC3_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_RTC3_INT_ENABLE_RTC3_ENABLE                                     */
-/*   Description:  Enable RTC 3 Interrupt                               */
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT		0
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
-					__IA64_UL_CONST(0x0000000000000001)
-
-/*   SH_EVENT_OCCURRED_RTC1_INT                                         */
-/*   Description:  Pending RTC 1 Interrupt                              */
-#define SH_EVENT_OCCURRED_RTC1_INT_SHFT			24
-#define SH_EVENT_OCCURRED_RTC1_INT_MASK	__IA64_UL_CONST(0x0000000001000000)
-
-/*   SH_EVENT_OCCURRED_RTC2_INT                                         */
-/*   Description:  Pending RTC 2 Interrupt                              */
-#define SH_EVENT_OCCURRED_RTC2_INT_SHFT			25
-#define SH_EVENT_OCCURRED_RTC2_INT_MASK	__IA64_UL_CONST(0x0000000002000000)
-
-/*   SH_EVENT_OCCURRED_RTC3_INT                                         */
-/*   Description:  Pending RTC 3 Interrupt                              */
-#define SH_EVENT_OCCURRED_RTC3_INT_SHFT			26
-#define SH_EVENT_OCCURRED_RTC3_INT_MASK	__IA64_UL_CONST(0x0000000004000000)
-
-/* ==================================================================== */
-/*                       Register "SH_IPI_ACCESS"                       */
-/*                 CPU interrupt Access Permission Bits                 */
-/* ==================================================================== */
-
-#define SH1_IPI_ACCESS			__IA64_UL_CONST(0x0000000110060480)
-#define SH2_IPI_ACCESS0			__IA64_UL_CONST(0x0000000010060c00)
-#define SH2_IPI_ACCESS1			__IA64_UL_CONST(0x0000000010060c80)
-#define SH2_IPI_ACCESS2			__IA64_UL_CONST(0x0000000010060d00)
-#define SH2_IPI_ACCESS3			__IA64_UL_CONST(0x0000000010060d80)
-
-/* ==================================================================== */
-/*                        Register "SH_INT_CMPB"                        */
-/*                  RTC Compare Value for Processor B                   */
-/* ==================================================================== */
-
-#define SH1_INT_CMPB			__IA64_UL_CONST(0x00000001101b0080)
-#define SH2_INT_CMPB			__IA64_UL_CONST(0x00000000101b0080)
-#define SH_INT_CMPB_MASK		__IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPB_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_INT_CMPB_REAL_TIME_CMPB                                         */
-/*   Description:  Real Time Clock Compare                              */
-#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT			0
-#define SH_INT_CMPB_REAL_TIME_CMPB_MASK	__IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/*                        Register "SH_INT_CMPC"                        */
-/*                  RTC Compare Value for Processor C                   */
-/* ==================================================================== */
-
-#define SH1_INT_CMPC			__IA64_UL_CONST(0x00000001101b0100)
-#define SH2_INT_CMPC			__IA64_UL_CONST(0x00000000101b0100)
-#define SH_INT_CMPC_MASK		__IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPC_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_INT_CMPC_REAL_TIME_CMPC                                         */
-/*   Description:  Real Time Clock Compare                              */
-#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT			0
-#define SH_INT_CMPC_REAL_TIME_CMPC_MASK	__IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/*                        Register "SH_INT_CMPD"                        */
-/*                  RTC Compare Value for Processor D                   */
-/* ==================================================================== */
-
-#define SH1_INT_CMPD			__IA64_UL_CONST(0x00000001101b0180)
-#define SH2_INT_CMPD			__IA64_UL_CONST(0x00000000101b0180)
-#define SH_INT_CMPD_MASK		__IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPD_INIT		__IA64_UL_CONST(0x0000000000000000)
-
-/*   SH_INT_CMPD_REAL_TIME_CMPD                                         */
-/*   Description:  Real Time Clock Compare                              */
-#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT			0
-#define SH_INT_CMPD_REAL_TIME_CMPD_MASK	__IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/*                Register "SH_MD_DQLP_MMR_DIR_PRIVEC0"                 */
-/*                      privilege vector for acc=0                      */
-/* ==================================================================== */
-#define SH1_MD_DQLP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100030300)
-
-/* ==================================================================== */
-/*                Register "SH_MD_DQRP_MMR_DIR_PRIVEC0"                 */
-/*                      privilege vector for acc=0                      */
-/* ==================================================================== */
-#define SH1_MD_DQRP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100050300)
-
-/* ==================================================================== */
-/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
-/* and SHUB2 that it makes sense to define a geberic name for the MMR.  */
-/* It is acceptible to use (for example) SH_IPI_INT to reference the    */
-/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based  */
-/* on the type of the SHUB. Do not use these #defines in performance    */
-/* critical code  or loops - there is a small performance penalty.      */
-/* ==================================================================== */
-#define shubmmr(a,b) 		(is_shub2() ? a##2_##b : a##1_##b)
-
-#define SH_REAL_JUNK_BUS_LED0	shubmmr(SH, REAL_JUNK_BUS_LED0)
-#define SH_IPI_INT		shubmmr(SH, IPI_INT)
-#define SH_EVENT_OCCURRED	shubmmr(SH, EVENT_OCCURRED)
-#define SH_EVENT_OCCURRED_ALIAS	shubmmr(SH, EVENT_OCCURRED_ALIAS)
-#define SH_RTC			shubmmr(SH, RTC)
-#define SH_RTC1_INT_CONFIG	shubmmr(SH, RTC1_INT_CONFIG)
-#define SH_RTC1_INT_ENABLE	shubmmr(SH, RTC1_INT_ENABLE)
-#define SH_RTC2_INT_CONFIG	shubmmr(SH, RTC2_INT_CONFIG)
-#define SH_RTC2_INT_ENABLE	shubmmr(SH, RTC2_INT_ENABLE)
-#define SH_RTC3_INT_CONFIG	shubmmr(SH, RTC3_INT_CONFIG)
-#define SH_RTC3_INT_ENABLE	shubmmr(SH, RTC3_INT_ENABLE)
-#define SH_INT_CMPB		shubmmr(SH, INT_CMPB)
-#define SH_INT_CMPC		shubmmr(SH, INT_CMPC)
-#define SH_INT_CMPD		shubmmr(SH, INT_CMPD)
-
-/* ========================================================================== */
-/*                        Register "SH2_BT_ENG_CSR_0"                         */
-/*                    Engine 0 Control and Status Register                    */
-/* ========================================================================== */
-
-#define SH2_BT_ENG_CSR_0		__IA64_UL_CONST(0x0000000030040000)
-#define SH2_BT_ENG_SRC_ADDR_0		__IA64_UL_CONST(0x0000000030040080)
-#define SH2_BT_ENG_DEST_ADDR_0		__IA64_UL_CONST(0x0000000030040100)
-#define SH2_BT_ENG_NOTIF_ADDR_0		__IA64_UL_CONST(0x0000000030040180)
-
-/* ========================================================================== */
-/*                       BTE interfaces 1-3                                   */
-/* ========================================================================== */
-
-#define SH2_BT_ENG_CSR_1		__IA64_UL_CONST(0x0000000030050000)
-#define SH2_BT_ENG_CSR_2		__IA64_UL_CONST(0x0000000030060000)
-#define SH2_BT_ENG_CSR_3		__IA64_UL_CONST(0x0000000030070000)
-
-#endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/include/asm-ia64/sn/shubio.h b/include/asm-ia64/sn/shubio.h
deleted file mode 100644
index 22a6f18a5313..000000000000
--- a/include/asm-ia64/sn/shubio.h
+++ /dev/null
@@ -1,3358 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SHUBIO_H
-#define _ASM_IA64_SN_SHUBIO_H
-
-#define HUB_WIDGET_ID_MAX	0xf
-#define IIO_NUM_ITTES		7
-#define HUB_NUM_BIG_WINDOW	(IIO_NUM_ITTES - 1)
-
-#define		IIO_WID			0x00400000	/* Crosstalk Widget Identification */
-							/* This register is also accessible from
-							 * Crosstalk at address 0x0.  */
-#define		IIO_WSTAT		0x00400008	/* Crosstalk Widget Status */
-#define		IIO_WCR			0x00400020	/* Crosstalk Widget Control Register */
-#define		IIO_ILAPR		0x00400100	/* IO Local Access Protection Register */
-#define		IIO_ILAPO		0x00400108	/* IO Local Access Protection Override */
-#define		IIO_IOWA		0x00400110	/* IO Outbound Widget Access */
-#define		IIO_IIWA		0x00400118	/* IO Inbound Widget Access */
-#define		IIO_IIDEM		0x00400120	/* IO Inbound Device Error Mask */
-#define		IIO_ILCSR		0x00400128	/* IO LLP Control and Status Register */
-#define		IIO_ILLR		0x00400130	/* IO LLP Log Register    */
-#define		IIO_IIDSR		0x00400138	/* IO Interrupt Destination */
-
-#define		IIO_IGFX0		0x00400140	/* IO Graphics Node-Widget Map 0 */
-#define		IIO_IGFX1		0x00400148	/* IO Graphics Node-Widget Map 1 */
-
-#define		IIO_ISCR0		0x00400150	/* IO Scratch Register 0 */
-#define		IIO_ISCR1		0x00400158	/* IO Scratch Register 1 */
-
-#define		IIO_ITTE1		0x00400160	/* IO Translation Table Entry 1 */
-#define		IIO_ITTE2		0x00400168	/* IO Translation Table Entry 2 */
-#define		IIO_ITTE3		0x00400170	/* IO Translation Table Entry 3 */
-#define		IIO_ITTE4		0x00400178	/* IO Translation Table Entry 4 */
-#define		IIO_ITTE5		0x00400180	/* IO Translation Table Entry 5 */
-#define		IIO_ITTE6		0x00400188	/* IO Translation Table Entry 6 */
-#define		IIO_ITTE7		0x00400190	/* IO Translation Table Entry 7 */
-
-#define		IIO_IPRB0		0x00400198	/* IO PRB Entry 0   */
-#define		IIO_IPRB8		0x004001A0	/* IO PRB Entry 8   */
-#define		IIO_IPRB9		0x004001A8	/* IO PRB Entry 9   */
-#define		IIO_IPRBA		0x004001B0	/* IO PRB Entry A   */
-#define		IIO_IPRBB		0x004001B8	/* IO PRB Entry B   */
-#define		IIO_IPRBC		0x004001C0	/* IO PRB Entry C   */
-#define		IIO_IPRBD		0x004001C8	/* IO PRB Entry D   */
-#define		IIO_IPRBE		0x004001D0	/* IO PRB Entry E   */
-#define		IIO_IPRBF		0x004001D8	/* IO PRB Entry F   */
-
-#define		IIO_IXCC		0x004001E0	/* IO Crosstalk Credit Count Timeout */
-#define		IIO_IMEM		0x004001E8	/* IO Miscellaneous Error Mask */
-#define		IIO_IXTT		0x004001F0	/* IO Crosstalk Timeout Threshold */
-#define		IIO_IECLR		0x004001F8	/* IO Error Clear Register */
-#define		IIO_IBCR		0x00400200	/* IO BTE Control Register */
-
-#define		IIO_IXSM		0x00400208	/* IO Crosstalk Spurious Message */
-#define		IIO_IXSS		0x00400210	/* IO Crosstalk Spurious Sideband */
-
-#define		IIO_ILCT		0x00400218	/* IO LLP Channel Test    */
-
-#define		IIO_IIEPH1 		0x00400220	/* IO Incoming Error Packet Header, Part 1 */
-#define		IIO_IIEPH2 		0x00400228	/* IO Incoming Error Packet Header, Part 2 */
-
-#define		IIO_ISLAPR 		0x00400230	/* IO SXB Local Access Protection Regster */
-#define		IIO_ISLAPO 		0x00400238	/* IO SXB Local Access Protection Override */
-
-#define		IIO_IWI			0x00400240	/* IO Wrapper Interrupt Register */
-#define		IIO_IWEL		0x00400248	/* IO Wrapper Error Log Register */
-#define		IIO_IWC			0x00400250	/* IO Wrapper Control Register */
-#define		IIO_IWS			0x00400258	/* IO Wrapper Status Register */
-#define		IIO_IWEIM		0x00400260	/* IO Wrapper Error Interrupt Masking Register */
-
-#define		IIO_IPCA		0x00400300	/* IO PRB Counter Adjust */
-
-#define		IIO_IPRTE0_A		0x00400308	/* IO PIO Read Address Table Entry 0, Part A */
-#define		IIO_IPRTE1_A		0x00400310	/* IO PIO Read Address Table Entry 1, Part A */
-#define		IIO_IPRTE2_A		0x00400318	/* IO PIO Read Address Table Entry 2, Part A */
-#define		IIO_IPRTE3_A		0x00400320	/* IO PIO Read Address Table Entry 3, Part A */
-#define		IIO_IPRTE4_A		0x00400328	/* IO PIO Read Address Table Entry 4, Part A */
-#define		IIO_IPRTE5_A		0x00400330	/* IO PIO Read Address Table Entry 5, Part A */
-#define		IIO_IPRTE6_A		0x00400338	/* IO PIO Read Address Table Entry 6, Part A */
-#define		IIO_IPRTE7_A		0x00400340	/* IO PIO Read Address Table Entry 7, Part A */
-
-#define		IIO_IPRTE0_B		0x00400348	/* IO PIO Read Address Table Entry 0, Part B */
-#define		IIO_IPRTE1_B		0x00400350	/* IO PIO Read Address Table Entry 1, Part B */
-#define		IIO_IPRTE2_B		0x00400358	/* IO PIO Read Address Table Entry 2, Part B */
-#define		IIO_IPRTE3_B		0x00400360	/* IO PIO Read Address Table Entry 3, Part B */
-#define		IIO_IPRTE4_B		0x00400368	/* IO PIO Read Address Table Entry 4, Part B */
-#define		IIO_IPRTE5_B		0x00400370	/* IO PIO Read Address Table Entry 5, Part B */
-#define		IIO_IPRTE6_B		0x00400378	/* IO PIO Read Address Table Entry 6, Part B */
-#define		IIO_IPRTE7_B		0x00400380	/* IO PIO Read Address Table Entry 7, Part B */
-
-#define		IIO_IPDR		0x00400388	/* IO PIO Deallocation Register */
-#define		IIO_ICDR		0x00400390	/* IO CRB Entry Deallocation Register */
-#define		IIO_IFDR		0x00400398	/* IO IOQ FIFO Depth Register */
-#define		IIO_IIAP		0x004003A0	/* IO IIQ Arbitration Parameters */
-#define		IIO_ICMR		0x004003A8	/* IO CRB Management Register */
-#define		IIO_ICCR		0x004003B0	/* IO CRB Control Register */
-#define		IIO_ICTO		0x004003B8	/* IO CRB Timeout   */
-#define		IIO_ICTP		0x004003C0	/* IO CRB Timeout Prescalar */
-
-#define		IIO_ICRB0_A		0x00400400	/* IO CRB Entry 0_A */
-#define		IIO_ICRB0_B		0x00400408	/* IO CRB Entry 0_B */
-#define		IIO_ICRB0_C		0x00400410	/* IO CRB Entry 0_C */
-#define		IIO_ICRB0_D		0x00400418	/* IO CRB Entry 0_D */
-#define		IIO_ICRB0_E		0x00400420	/* IO CRB Entry 0_E */
-
-#define		IIO_ICRB1_A		0x00400430	/* IO CRB Entry 1_A */
-#define		IIO_ICRB1_B		0x00400438	/* IO CRB Entry 1_B */
-#define		IIO_ICRB1_C		0x00400440	/* IO CRB Entry 1_C */
-#define		IIO_ICRB1_D		0x00400448	/* IO CRB Entry 1_D */
-#define		IIO_ICRB1_E		0x00400450	/* IO CRB Entry 1_E */
-
-#define		IIO_ICRB2_A		0x00400460	/* IO CRB Entry 2_A */
-#define		IIO_ICRB2_B		0x00400468	/* IO CRB Entry 2_B */
-#define		IIO_ICRB2_C		0x00400470	/* IO CRB Entry 2_C */
-#define		IIO_ICRB2_D		0x00400478	/* IO CRB Entry 2_D */
-#define		IIO_ICRB2_E		0x00400480	/* IO CRB Entry 2_E */
-
-#define		IIO_ICRB3_A		0x00400490	/* IO CRB Entry 3_A */
-#define		IIO_ICRB3_B		0x00400498	/* IO CRB Entry 3_B */
-#define		IIO_ICRB3_C		0x004004a0	/* IO CRB Entry 3_C */
-#define		IIO_ICRB3_D		0x004004a8	/* IO CRB Entry 3_D */
-#define		IIO_ICRB3_E		0x004004b0	/* IO CRB Entry 3_E */
-
-#define		IIO_ICRB4_A		0x004004c0	/* IO CRB Entry 4_A */
-#define		IIO_ICRB4_B		0x004004c8	/* IO CRB Entry 4_B */
-#define		IIO_ICRB4_C		0x004004d0	/* IO CRB Entry 4_C */
-#define		IIO_ICRB4_D		0x004004d8	/* IO CRB Entry 4_D */
-#define		IIO_ICRB4_E		0x004004e0	/* IO CRB Entry 4_E */
-
-#define		IIO_ICRB5_A		0x004004f0	/* IO CRB Entry 5_A */
-#define		IIO_ICRB5_B		0x004004f8	/* IO CRB Entry 5_B */
-#define		IIO_ICRB5_C		0x00400500	/* IO CRB Entry 5_C */
-#define		IIO_ICRB5_D		0x00400508	/* IO CRB Entry 5_D */
-#define		IIO_ICRB5_E		0x00400510	/* IO CRB Entry 5_E */
-
-#define		IIO_ICRB6_A		0x00400520	/* IO CRB Entry 6_A */
-#define		IIO_ICRB6_B		0x00400528	/* IO CRB Entry 6_B */
-#define		IIO_ICRB6_C		0x00400530	/* IO CRB Entry 6_C */
-#define		IIO_ICRB6_D		0x00400538	/* IO CRB Entry 6_D */
-#define		IIO_ICRB6_E		0x00400540	/* IO CRB Entry 6_E */
-
-#define		IIO_ICRB7_A		0x00400550	/* IO CRB Entry 7_A */
-#define		IIO_ICRB7_B		0x00400558	/* IO CRB Entry 7_B */
-#define		IIO_ICRB7_C		0x00400560	/* IO CRB Entry 7_C */
-#define		IIO_ICRB7_D		0x00400568	/* IO CRB Entry 7_D */
-#define		IIO_ICRB7_E		0x00400570	/* IO CRB Entry 7_E */
-
-#define		IIO_ICRB8_A		0x00400580	/* IO CRB Entry 8_A */
-#define		IIO_ICRB8_B		0x00400588	/* IO CRB Entry 8_B */
-#define		IIO_ICRB8_C		0x00400590	/* IO CRB Entry 8_C */
-#define		IIO_ICRB8_D		0x00400598	/* IO CRB Entry 8_D */
-#define		IIO_ICRB8_E		0x004005a0	/* IO CRB Entry 8_E */
-
-#define		IIO_ICRB9_A		0x004005b0	/* IO CRB Entry 9_A */
-#define		IIO_ICRB9_B		0x004005b8	/* IO CRB Entry 9_B */
-#define		IIO_ICRB9_C		0x004005c0	/* IO CRB Entry 9_C */
-#define		IIO_ICRB9_D		0x004005c8	/* IO CRB Entry 9_D */
-#define		IIO_ICRB9_E		0x004005d0	/* IO CRB Entry 9_E */
-
-#define		IIO_ICRBA_A		0x004005e0	/* IO CRB Entry A_A */
-#define		IIO_ICRBA_B		0x004005e8	/* IO CRB Entry A_B */
-#define		IIO_ICRBA_C		0x004005f0	/* IO CRB Entry A_C */
-#define		IIO_ICRBA_D		0x004005f8	/* IO CRB Entry A_D */
-#define		IIO_ICRBA_E		0x00400600	/* IO CRB Entry A_E */
-
-#define		IIO_ICRBB_A		0x00400610	/* IO CRB Entry B_A */
-#define		IIO_ICRBB_B		0x00400618	/* IO CRB Entry B_B */
-#define		IIO_ICRBB_C		0x00400620	/* IO CRB Entry B_C */
-#define		IIO_ICRBB_D		0x00400628	/* IO CRB Entry B_D */
-#define		IIO_ICRBB_E		0x00400630	/* IO CRB Entry B_E */
-
-#define		IIO_ICRBC_A		0x00400640	/* IO CRB Entry C_A */
-#define		IIO_ICRBC_B		0x00400648	/* IO CRB Entry C_B */
-#define		IIO_ICRBC_C		0x00400650	/* IO CRB Entry C_C */
-#define		IIO_ICRBC_D		0x00400658	/* IO CRB Entry C_D */
-#define		IIO_ICRBC_E		0x00400660	/* IO CRB Entry C_E */
-
-#define		IIO_ICRBD_A		0x00400670	/* IO CRB Entry D_A */
-#define		IIO_ICRBD_B		0x00400678	/* IO CRB Entry D_B */
-#define		IIO_ICRBD_C		0x00400680	/* IO CRB Entry D_C */
-#define		IIO_ICRBD_D		0x00400688	/* IO CRB Entry D_D */
-#define		IIO_ICRBD_E		0x00400690	/* IO CRB Entry D_E */
-
-#define		IIO_ICRBE_A		0x004006a0	/* IO CRB Entry E_A */
-#define		IIO_ICRBE_B		0x004006a8	/* IO CRB Entry E_B */
-#define		IIO_ICRBE_C		0x004006b0	/* IO CRB Entry E_C */
-#define		IIO_ICRBE_D		0x004006b8	/* IO CRB Entry E_D */
-#define		IIO_ICRBE_E		0x004006c0	/* IO CRB Entry E_E */
-
-#define		IIO_ICSML		0x00400700	/* IO CRB Spurious Message Low */
-#define		IIO_ICSMM		0x00400708	/* IO CRB Spurious Message Middle */
-#define		IIO_ICSMH		0x00400710	/* IO CRB Spurious Message High */
-
-#define		IIO_IDBSS		0x00400718	/* IO Debug Submenu Select */
-
-#define		IIO_IBLS0		0x00410000	/* IO BTE Length Status 0 */
-#define		IIO_IBSA0		0x00410008	/* IO BTE Source Address 0 */
-#define		IIO_IBDA0		0x00410010	/* IO BTE Destination Address 0 */
-#define		IIO_IBCT0		0x00410018	/* IO BTE Control Terminate 0 */
-#define		IIO_IBNA0		0x00410020	/* IO BTE Notification Address 0 */
-#define		IIO_IBIA0		0x00410028	/* IO BTE Interrupt Address 0 */
-#define		IIO_IBLS1		0x00420000	/* IO BTE Length Status 1 */
-#define		IIO_IBSA1		0x00420008	/* IO BTE Source Address 1 */
-#define		IIO_IBDA1		0x00420010	/* IO BTE Destination Address 1 */
-#define		IIO_IBCT1		0x00420018	/* IO BTE Control Terminate 1 */
-#define		IIO_IBNA1		0x00420020	/* IO BTE Notification Address 1 */
-#define		IIO_IBIA1		0x00420028	/* IO BTE Interrupt Address 1 */
-
-#define		IIO_IPCR		0x00430000	/* IO Performance Control */
-#define		IIO_IPPR		0x00430008	/* IO Performance Profiling */
-
-/************************************************************************
- *									*
- * Description:  This register echoes some information from the         *
- * LB_REV_ID register. It is available through Crosstalk as described   *
- * above. The REV_NUM and MFG_NUM fields receive their values from      *
- * the REVISION and MANUFACTURER fields in the LB_REV_ID register.      *
- * The PART_NUM field's value is the Crosstalk device ID number that    *
- * Steve Miller assigned to the SHub chip.                              *
- *									*
- ************************************************************************/
-
-typedef union ii_wid_u {
-	u64 ii_wid_regval;
-	struct {
-		u64 w_rsvd_1:1;
-		u64 w_mfg_num:11;
-		u64 w_part_num:16;
-		u64 w_rev_num:4;
-		u64 w_rsvd:32;
-	} ii_wid_fld_s;
-} ii_wid_u_t;
-
-/************************************************************************
- *									*
- *  The fields in this register are set upon detection of an error      *
- * and cleared by various mechanisms, as explained in the               *
- * description.                                                         *
- *									*
- ************************************************************************/
-
-typedef union ii_wstat_u {
-	u64 ii_wstat_regval;
-	struct {
-		u64 w_pending:4;
-		u64 w_xt_crd_to:1;
-		u64 w_xt_tail_to:1;
-		u64 w_rsvd_3:3;
-		u64 w_tx_mx_rty:1;
-		u64 w_rsvd_2:6;
-		u64 w_llp_tx_cnt:8;
-		u64 w_rsvd_1:8;
-		u64 w_crazy:1;
-		u64 w_rsvd:31;
-	} ii_wstat_fld_s;
-} ii_wstat_u_t;
-
-/************************************************************************
- *									*
- * Description:  This is a read-write enabled register. It controls     *
- * various aspects of the Crosstalk flow control.                       *
- *									*
- ************************************************************************/
-
-typedef union ii_wcr_u {
-	u64 ii_wcr_regval;
-	struct {
-		u64 w_wid:4;
-		u64 w_tag:1;
-		u64 w_rsvd_1:8;
-		u64 w_dst_crd:3;
-		u64 w_f_bad_pkt:1;
-		u64 w_dir_con:1;
-		u64 w_e_thresh:5;
-		u64 w_rsvd:41;
-	} ii_wcr_fld_s;
-} ii_wcr_u_t;
-
-/************************************************************************
- *									*
- * Description:  This register's value is a bit vector that guards      *
- * access to local registers within the II as well as to external       *
- * Crosstalk widgets. Each bit in the register corresponds to a         *
- * particular region in the system; a region consists of one, two or    *
- * four nodes (depending on the value of the REGION_SIZE field in the   *
- * LB_REV_ID register, which is documented in Section 8.3.1.1). The     *
- * protection provided by this register applies to PIO read             *
- * operations as well as PIO write operations. The II will perform a    *
- * PIO read or write request only if the bit for the requestor's        *
- * region is set; otherwise, the II will not perform the requested      *
- * operation and will return an error response. When a PIO read or      *
- * write request targets an external Crosstalk widget, then not only    *
- * must the bit for the requestor's region be set in the ILAPR, but     *
- * also the target widget's bit in the IOWA register must be set in     *
- * order for the II to perform the requested operation; otherwise,      *
- * the II will return an error response. Hence, the protection          *
- * provided by the IOWA register supplements the protection provided    *
- * by the ILAPR for requests that target external Crosstalk widgets.    *
- * This register itself can be accessed only by the nodes whose         *
- * region ID bits are enabled in this same register. It can also be     *
- * accessed through the IAlias space by the local processors.           *
- * The reset value of this register allows access by all nodes.         *
- *									*
- ************************************************************************/
-
-typedef union ii_ilapr_u {
-	u64 ii_ilapr_regval;
-	struct {
-		u64 i_region:64;
-	} ii_ilapr_fld_s;
-} ii_ilapr_u_t;
-
-/************************************************************************
- *									*
- * Description:  A write to this register of the 64-bit value           *
- * "SGIrules" in ASCII, will cause the bit in the ILAPR register        *
- * corresponding to the region of the requestor to be set (allow        *
- * access). A write of any other value will be ignored. Access          *
- * protection for this register is "SGIrules".                          *
- * This register can also be accessed through the IAlias space.         *
- * However, this access will not change the access permissions in the   *
- * ILAPR.                                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_ilapo_u {
-	u64 ii_ilapo_regval;
-	struct {
-		u64 i_io_ovrride:64;
-	} ii_ilapo_fld_s;
-} ii_ilapo_u_t;
-
-/************************************************************************
- *									*
- *  This register qualifies all the PIO and Graphics writes launched    *
- * from the SHUB towards a widget.                                      *
- *									*
- ************************************************************************/
-
-typedef union ii_iowa_u {
-	u64 ii_iowa_regval;
-	struct {
-		u64 i_w0_oac:1;
-		u64 i_rsvd_1:7;
-		u64 i_wx_oac:8;
-		u64 i_rsvd:48;
-	} ii_iowa_fld_s;
-} ii_iowa_u_t;
-
-/************************************************************************
- *									*
- * Description:  This register qualifies all the requests launched      *
- * from a widget towards the Shub. This register is intended to be      *
- * used by software in case of misbehaving widgets.                     *
- *									*
- *									*
- ************************************************************************/
-
-typedef union ii_iiwa_u {
-	u64 ii_iiwa_regval;
-	struct {
-		u64 i_w0_iac:1;
-		u64 i_rsvd_1:7;
-		u64 i_wx_iac:8;
-		u64 i_rsvd:48;
-	} ii_iiwa_fld_s;
-} ii_iiwa_u_t;
-
-/************************************************************************
- *									*
- * Description:  This register qualifies all the operations launched    *
- * from a widget towards the SHub. It allows individual access          *
- * control for up to 8 devices per widget. A device refers to           *
- * individual DMA master hosted by a widget.                            *
- * The bits in each field of this register are cleared by the Shub      *
- * upon detection of an error which requires the device to be           *
- * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric    *
- * Crosstalk). Whether or not a device has access rights to this        *
- * Shub is determined by an AND of the device enable bit in the         *
- * appropriate field of this register and the corresponding bit in      *
- * the Wx_IAC field (for the widget which this device belongs to).      *
- * The bits in this field are set by writing a 1 to them. Incoming      *
- * replies from Crosstalk are not subject to this access control        *
- * mechanism.                                                           *
- *									*
- ************************************************************************/
-
-typedef union ii_iidem_u {
-	u64 ii_iidem_regval;
-	struct {
-		u64 i_w8_dxs:8;
-		u64 i_w9_dxs:8;
-		u64 i_wa_dxs:8;
-		u64 i_wb_dxs:8;
-		u64 i_wc_dxs:8;
-		u64 i_wd_dxs:8;
-		u64 i_we_dxs:8;
-		u64 i_wf_dxs:8;
-	} ii_iidem_fld_s;
-} ii_iidem_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the various programmable fields necessary    *
- * for controlling and observing the LLP signals.                       *
- *									*
- ************************************************************************/
-
-typedef union ii_ilcsr_u {
-	u64 ii_ilcsr_regval;
-	struct {
-		u64 i_nullto:6;
-		u64 i_rsvd_4:2;
-		u64 i_wrmrst:1;
-		u64 i_rsvd_3:1;
-		u64 i_llp_en:1;
-		u64 i_bm8:1;
-		u64 i_llp_stat:2;
-		u64 i_remote_power:1;
-		u64 i_rsvd_2:1;
-		u64 i_maxrtry:10;
-		u64 i_d_avail_sel:2;
-		u64 i_rsvd_1:4;
-		u64 i_maxbrst:10;
-		u64 i_rsvd:22;
-
-	} ii_ilcsr_fld_s;
-} ii_ilcsr_u_t;
-
-/************************************************************************
- *									*
- *  This is simply a status registers that monitors the LLP error       *
- * rate.								*
- *									*
- ************************************************************************/
-
-typedef union ii_illr_u {
-	u64 ii_illr_regval;
-	struct {
-		u64 i_sn_cnt:16;
-		u64 i_cb_cnt:16;
-		u64 i_rsvd:32;
-	} ii_illr_fld_s;
-} ii_illr_u_t;
-
-/************************************************************************
- *									*
- * Description:  All II-detected non-BTE error interrupts are           *
- * specified via this register.                                         *
- * NOTE: The PI interrupt register address is hardcoded in the II. If   *
- * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI      *
- * packet) to address offset 0x0180_0090 within the local register      *
- * address space of PI0 on the node specified by the NODE field. If     *
- * PI_ID==1, then the II sends the interrupt request to address         *
- * offset 0x01A0_0090 within the local register address space of PI1    *
- * on the node specified by the NODE field.                             *
- *									*
- ************************************************************************/
-
-typedef union ii_iidsr_u {
-	u64 ii_iidsr_regval;
-	struct {
-		u64 i_level:8;
-		u64 i_pi_id:1;
-		u64 i_node:11;
-		u64 i_rsvd_3:4;
-		u64 i_enable:1;
-		u64 i_rsvd_2:3;
-		u64 i_int_sent:2;
-		u64 i_rsvd_1:2;
-		u64 i_pi0_forward_int:1;
-		u64 i_pi1_forward_int:1;
-		u64 i_rsvd:30;
-	} ii_iidsr_fld_s;
-} ii_iidsr_u_t;
-
-/************************************************************************
- *									*
- *  There are two instances of this register. This register is used     *
- * for matching up the incoming responses from the graphics widget to   *
- * the processor that initiated the graphics operation. The             *
- * write-responses are converted to graphics credits and returned to    *
- * the processor so that the processor interface can manage the flow    *
- * control.                                                             *
- *									*
- ************************************************************************/
-
-typedef union ii_igfx0_u {
-	u64 ii_igfx0_regval;
-	struct {
-		u64 i_w_num:4;
-		u64 i_pi_id:1;
-		u64 i_n_num:12;
-		u64 i_p_num:1;
-		u64 i_rsvd:46;
-	} ii_igfx0_fld_s;
-} ii_igfx0_u_t;
-
-/************************************************************************
- *									*
- *  There are two instances of this register. This register is used     *
- * for matching up the incoming responses from the graphics widget to   *
- * the processor that initiated the graphics operation. The             *
- * write-responses are converted to graphics credits and returned to    *
- * the processor so that the processor interface can manage the flow    *
- * control.                                                             *
- *									*
- ************************************************************************/
-
-typedef union ii_igfx1_u {
-	u64 ii_igfx1_regval;
-	struct {
-		u64 i_w_num:4;
-		u64 i_pi_id:1;
-		u64 i_n_num:12;
-		u64 i_p_num:1;
-		u64 i_rsvd:46;
-	} ii_igfx1_fld_s;
-} ii_igfx1_u_t;
-
-/************************************************************************
- *									*
- *  There are two instances of this registers. These registers are      *
- * used as scratch registers for software use.                          *
- *									*
- ************************************************************************/
-
-typedef union ii_iscr0_u {
-	u64 ii_iscr0_regval;
-	struct {
-		u64 i_scratch:64;
-	} ii_iscr0_fld_s;
-} ii_iscr0_u_t;
-
-/************************************************************************
- *									*
- *  There are two instances of this registers. These registers are      *
- * used as scratch registers for software use.                          *
- *									*
- ************************************************************************/
-
-typedef union ii_iscr1_u {
-	u64 ii_iscr1_regval;
-	struct {
-		u64 i_scratch:64;
-	} ii_iscr1_fld_s;
-} ii_iscr1_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are seven instances of translation table entry   *
- * registers. Each register maps a Shub Big Window to a 48-bit          *
- * address on Crosstalk.                                                *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
- * number) are used to select one of these 7 registers. The Widget      *
- * number field is then derived from the W_NUM field for synthesizing   *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
- * are padded with zeros. Although the maximum Crosstalk space          *
- * addressable by the SHub is thus the lower 16 GBytes per widget       * 
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
- * space can be accessed.                                               *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
- * Window number) are used to select one of these 7 registers. The      *
- * Widget number field is then derived from the W_NUM field for         *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
- * field is used as Crosstalk[47], and remainder of the Crosstalk       *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
- * Crosstalk space addressable by the Shub is thus the lower            *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
- * of this space can be accessed.                                       *
- *									*
- ************************************************************************/
-
-typedef union ii_itte1_u {
-	u64 ii_itte1_regval;
-	struct {
-		u64 i_offset:5;
-		u64 i_rsvd_1:3;
-		u64 i_w_num:4;
-		u64 i_iosp:1;
-		u64 i_rsvd:51;
-	} ii_itte1_fld_s;
-} ii_itte1_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are seven instances of translation table entry   *
- * registers. Each register maps a Shub Big Window to a 48-bit          *
- * address on Crosstalk.                                                *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
- * number) are used to select one of these 7 registers. The Widget      *
- * number field is then derived from the W_NUM field for synthesizing   *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
- * are padded with zeros. Although the maximum Crosstalk space          *
- * addressable by the Shub is thus the lower 16 GBytes per widget       *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
- * space can be accessed.                                               *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
- * Window number) are used to select one of these 7 registers. The      *
- * Widget number field is then derived from the W_NUM field for         *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
- * field is used as Crosstalk[47], and remainder of the Crosstalk       *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
- * Crosstalk space addressable by the Shub is thus the lower            *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
- * of this space can be accessed.                                       *
- *									*
- ************************************************************************/
-
-typedef union ii_itte2_u {
-	u64 ii_itte2_regval;
-	struct {
-		u64 i_offset:5;
-		u64 i_rsvd_1:3;
-		u64 i_w_num:4;
-		u64 i_iosp:1;
-		u64 i_rsvd:51;
-	} ii_itte2_fld_s;
-} ii_itte2_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are seven instances of translation table entry   *
- * registers. Each register maps a Shub Big Window to a 48-bit          *
- * address on Crosstalk.                                                *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
- * number) are used to select one of these 7 registers. The Widget      *
- * number field is then derived from the W_NUM field for synthesizing   *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
- * are padded with zeros. Although the maximum Crosstalk space          *
- * addressable by the Shub is thus the lower 16 GBytes per widget       *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
- * space can be accessed.                                               *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
- * Window number) are used to select one of these 7 registers. The      *
- * Widget number field is then derived from the W_NUM field for         *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
- * field is used as Crosstalk[47], and remainder of the Crosstalk       *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
- * Crosstalk space addressable by the SHub is thus the lower            *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
- * of this space can be accessed.                                       *
- *									*
- ************************************************************************/
-
-typedef union ii_itte3_u {
-	u64 ii_itte3_regval;
-	struct {
-		u64 i_offset:5;
-		u64 i_rsvd_1:3;
-		u64 i_w_num:4;
-		u64 i_iosp:1;
-		u64 i_rsvd:51;
-	} ii_itte3_fld_s;
-} ii_itte3_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are seven instances of translation table entry   *
- * registers. Each register maps a SHub Big Window to a 48-bit          *
- * address on Crosstalk.                                                *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
- * number) are used to select one of these 7 registers. The Widget      *
- * number field is then derived from the W_NUM field for synthesizing   *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
- * are padded with zeros. Although the maximum Crosstalk space          *
- * addressable by the SHub is thus the lower 16 GBytes per widget       *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
- * space can be accessed.                                               *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
- * Window number) are used to select one of these 7 registers. The      *
- * Widget number field is then derived from the W_NUM field for         *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
- * field is used as Crosstalk[47], and remainder of the Crosstalk       *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
- * Crosstalk space addressable by the SHub is thus the lower            *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
- * of this space can be accessed.                                       *
- *									*
- ************************************************************************/
-
-typedef union ii_itte4_u {
-	u64 ii_itte4_regval;
-	struct {
-		u64 i_offset:5;
-		u64 i_rsvd_1:3;
-		u64 i_w_num:4;
-		u64 i_iosp:1;
-		u64 i_rsvd:51;
-	} ii_itte4_fld_s;
-} ii_itte4_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are seven instances of translation table entry   *
- * registers. Each register maps a SHub Big Window to a 48-bit          *
- * address on Crosstalk.                                                *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
- * number) are used to select one of these 7 registers. The Widget      *
- * number field is then derived from the W_NUM field for synthesizing   *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
- * are padded with zeros. Although the maximum Crosstalk space          *
- * addressable by the Shub is thus the lower 16 GBytes per widget       *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
- * space can be accessed.                                               *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
- * Window number) are used to select one of these 7 registers. The      *
- * Widget number field is then derived from the W_NUM field for         *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
- * field is used as Crosstalk[47], and remainder of the Crosstalk       *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
- * Crosstalk space addressable by the Shub is thus the lower            *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
- * of this space can be accessed.                                       *
- *									*
- ************************************************************************/
-
-typedef union ii_itte5_u {
-	u64 ii_itte5_regval;
-	struct {
-		u64 i_offset:5;
-		u64 i_rsvd_1:3;
-		u64 i_w_num:4;
-		u64 i_iosp:1;
-		u64 i_rsvd:51;
-	} ii_itte5_fld_s;
-} ii_itte5_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are seven instances of translation table entry   *
- * registers. Each register maps a Shub Big Window to a 48-bit          *
- * address on Crosstalk.                                                *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
- * number) are used to select one of these 7 registers. The Widget      *
- * number field is then derived from the W_NUM field for synthesizing   *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
- * are padded with zeros. Although the maximum Crosstalk space          *
- * addressable by the Shub is thus the lower 16 GBytes per widget       *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
- * space can be accessed.                                               *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
- * Window number) are used to select one of these 7 registers. The      *
- * Widget number field is then derived from the W_NUM field for         *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
- * field is used as Crosstalk[47], and remainder of the Crosstalk       *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
- * Crosstalk space addressable by the Shub is thus the lower            *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
- * of this space can be accessed.                                       *
- *									*
- ************************************************************************/
-
-typedef union ii_itte6_u {
-	u64 ii_itte6_regval;
-	struct {
-		u64 i_offset:5;
-		u64 i_rsvd_1:3;
-		u64 i_w_num:4;
-		u64 i_iosp:1;
-		u64 i_rsvd:51;
-	} ii_itte6_fld_s;
-} ii_itte6_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are seven instances of translation table entry   *
- * registers. Each register maps a Shub Big Window to a 48-bit          *
- * address on Crosstalk.                                                *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
- * number) are used to select one of these 7 registers. The Widget      *
- * number field is then derived from the W_NUM field for synthesizing   *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
- * are padded with zeros. Although the maximum Crosstalk space          *
- * addressable by the Shub is thus the lower 16 GBytes per widget       *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
- * space can be accessed.                                               *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
- * Window number) are used to select one of these 7 registers. The      *
- * Widget number field is then derived from the W_NUM field for         *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
- * field is used as Crosstalk[47], and remainder of the Crosstalk       *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
- * Crosstalk space addressable by the SHub is thus the lower            *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
- * of this space can be accessed.                                       *
- *									*
- ************************************************************************/
-
-typedef union ii_itte7_u {
-	u64 ii_itte7_regval;
-	struct {
-		u64 i_offset:5;
-		u64 i_rsvd_1:3;
-		u64 i_w_num:4;
-		u64 i_iosp:1;
-		u64 i_rsvd:51;
-	} ii_itte7_fld_s;
-} ii_itte7_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprb0_u {
-	u64 ii_iprb0_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprb0_fld_s;
-} ii_iprb0_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprb8_u {
-	u64 ii_iprb8_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprb8_fld_s;
-} ii_iprb8_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprb9_u {
-	u64 ii_iprb9_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprb9_fld_s;
-} ii_iprb9_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.        *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- *									*
- *									*
- ************************************************************************/
-
-typedef union ii_iprba_u {
-	u64 ii_iprba_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprba_fld_s;
-} ii_iprba_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprbb_u {
-	u64 ii_iprbb_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprbb_fld_s;
-} ii_iprbb_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprbc_u {
-	u64 ii_iprbc_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprbc_fld_s;
-} ii_iprbc_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprbd_u {
-	u64 ii_iprbd_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprbd_fld_s;
-} ii_iprbd_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of SHub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprbe_u {
-	u64 ii_iprbe_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprbe_fld_s;
-} ii_iprbe_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 9 instances of this register, one per        *
- * actual widget in this implementation of Shub and Crossbow.           *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
- * refers to Crossbow's internal space.                                 *
- * This register contains the state elements per widget that are        *
- * necessary to manage the PIO flow control on Crosstalk and on the     *
- * Router Network. See the PIO Flow Control chapter for a complete      *
- * description of this register                                         *
- * The SPUR_WR bit requires some explanation. When this register is     *
- * written, the new value of the C field is captured in an internal     *
- * register so the hardware can remember what the programmer wrote      *
- * into the credit counter. The SPUR_WR bit sets whenever the C field   *
- * increments above this stored value, which indicates that there       *
- * have been more responses received than requests sent. The SPUR_WR    *
- * bit cannot be cleared until a value is written to the IPRBx          *
- * register; the write will correct the C field and capture its new     *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
- * .    								*
- *									*
- ************************************************************************/
-
-typedef union ii_iprbf_u {
-	u64 ii_iprbf_regval;
-	struct {
-		u64 i_c:8;
-		u64 i_na:14;
-		u64 i_rsvd_2:2;
-		u64 i_nb:14;
-		u64 i_rsvd_1:2;
-		u64 i_m:2;
-		u64 i_f:1;
-		u64 i_of_cnt:5;
-		u64 i_error:1;
-		u64 i_rd_to:1;
-		u64 i_spur_wr:1;
-		u64 i_spur_rd:1;
-		u64 i_rsvd:11;
-		u64 i_mult_err:1;
-	} ii_iprbe_fld_s;
-} ii_iprbf_u_t;
-
-/************************************************************************
- *									*
- *  This register specifies the timeout value to use for monitoring     *
- * Crosstalk credits which are used outbound to Crosstalk. An           *
- * internal counter called the Crosstalk Credit Timeout Counter         *
- * increments every 128 II clocks. The counter starts counting          *
- * anytime the credit count drops below a threshold, and resets to      *
- * zero (stops counting) anytime the credit count is at or above the    *
- * threshold. The threshold is 1 credit in direct connect mode and 2    *
- * in Crossbow connect mode. When the internal Crosstalk Credit         *
- * Timeout Counter reaches the value programmed in this register, a     *
- * Crosstalk Credit Timeout has occurred. The internal counter is not   *
- * readable from software, and stops counting at its maximum value,     *
- * so it cannot cause more than one interrupt.                          *
- *									*
- ************************************************************************/
-
-typedef union ii_ixcc_u {
-	u64 ii_ixcc_regval;
-	struct {
-		u64 i_time_out:26;
-		u64 i_rsvd:38;
-	} ii_ixcc_fld_s;
-} ii_ixcc_u_t;
-
-/************************************************************************
- *									*
- * Description:  This register qualifies all the PIO and DMA            *
- * operations launched from widget 0 towards the SHub. In               *
- * addition, it also qualifies accesses by the BTE streams.             *
- * The bits in each field of this register are cleared by the SHub      *
- * upon detection of an error which requires widget 0 or the BTE        *
- * streams to be terminated. Whether or not widget x has access         *
- * rights to this SHub is determined by an AND of the device            *
- * enable bit in the appropriate field of this register and bit 0 in    *
- * the Wx_IAC field. The bits in this field are set by writing a 1 to   *
- * them. Incoming replies from Crosstalk are not subject to this        *
- * access control mechanism.                                            *
- *									*
- ************************************************************************/
-
-typedef union ii_imem_u {
-	u64 ii_imem_regval;
-	struct {
-		u64 i_w0_esd:1;
-		u64 i_rsvd_3:3;
-		u64 i_b0_esd:1;
-		u64 i_rsvd_2:3;
-		u64 i_b1_esd:1;
-		u64 i_rsvd_1:3;
-		u64 i_clr_precise:1;
-		u64 i_rsvd:51;
-	} ii_imem_fld_s;
-} ii_imem_u_t;
-
-/************************************************************************
- *									*
- * Description:  This register specifies the timeout value to use for   *
- * monitoring Crosstalk tail flits coming into the Shub in the          *
- * TAIL_TO field. An internal counter associated with this register     *
- * is incremented every 128 II internal clocks (7 bits). The counter    *
- * starts counting anytime a header micropacket is received and stops   *
- * counting (and resets to zero) any time a micropacket with a Tail     *
- * bit is received. Once the counter reaches the threshold value        *
- * programmed in this register, it generates an interrupt to the        *
- * processor that is programmed into the IIDSR. The counter saturates   *
- * (does not roll over) at its maximum value, so it cannot cause        *
- * another interrupt until after it is cleared.                         *
- * The register also contains the Read Response Timeout values. The     *
- * Prescalar is 23 bits, and counts II clocks. An internal counter      *
- * increments on every II clock and when it reaches the value in the    *
- * Prescalar field, all IPRTE registers with their valid bits set       *
- * have their Read Response timers bumped. Whenever any of them match   *
- * the value in the RRSP_TO field, a Read Response Timeout has          *
- * occurred, and error handling occurs as described in the Error        *
- * Handling section of this document.                                   *
- *									*
- ************************************************************************/
-
-typedef union ii_ixtt_u {
-	u64 ii_ixtt_regval;
-	struct {
-		u64 i_tail_to:26;
-		u64 i_rsvd_1:6;
-		u64 i_rrsp_ps:23;
-		u64 i_rrsp_to:5;
-		u64 i_rsvd:4;
-	} ii_ixtt_fld_s;
-} ii_ixtt_u_t;
-
-/************************************************************************
- *									*
- *  Writing a 1 to the fields of this register clears the appropriate   *
- * error bits in other areas of SHub. Note that when the                *
- * E_PRB_x bits are used to clear error bits in PRB registers,          *
- * SPUR_RD and SPUR_WR may persist, because they require additional     *
- * action to clear them. See the IPRBx and IXSS Register                *
- * specifications.                                                      *
- *									*
- ************************************************************************/
-
-typedef union ii_ieclr_u {
-	u64 ii_ieclr_regval;
-	struct {
-		u64 i_e_prb_0:1;
-		u64 i_rsvd:7;
-		u64 i_e_prb_8:1;
-		u64 i_e_prb_9:1;
-		u64 i_e_prb_a:1;
-		u64 i_e_prb_b:1;
-		u64 i_e_prb_c:1;
-		u64 i_e_prb_d:1;
-		u64 i_e_prb_e:1;
-		u64 i_e_prb_f:1;
-		u64 i_e_crazy:1;
-		u64 i_e_bte_0:1;
-		u64 i_e_bte_1:1;
-		u64 i_reserved_1:10;
-		u64 i_spur_rd_hdr:1;
-		u64 i_cam_intr_to:1;
-		u64 i_cam_overflow:1;
-		u64 i_cam_read_miss:1;
-		u64 i_ioq_rep_underflow:1;
-		u64 i_ioq_req_underflow:1;
-		u64 i_ioq_rep_overflow:1;
-		u64 i_ioq_req_overflow:1;
-		u64 i_iiq_rep_overflow:1;
-		u64 i_iiq_req_overflow:1;
-		u64 i_ii_xn_rep_cred_overflow:1;
-		u64 i_ii_xn_req_cred_overflow:1;
-		u64 i_ii_xn_invalid_cmd:1;
-		u64 i_xn_ii_invalid_cmd:1;
-		u64 i_reserved_2:21;
-	} ii_ieclr_fld_s;
-} ii_ieclr_u_t;
-
-/************************************************************************
- *									*
- *  This register controls both BTEs. SOFT_RESET is intended for        *
- * recovery after an error. COUNT controls the total number of CRBs     *
- * that both BTEs (combined) can use, which affects total BTE           *
- * bandwidth.                                                           *
- *									*
- ************************************************************************/
-
-typedef union ii_ibcr_u {
-	u64 ii_ibcr_regval;
-	struct {
-		u64 i_count:4;
-		u64 i_rsvd_1:4;
-		u64 i_soft_reset:1;
-		u64 i_rsvd:55;
-	} ii_ibcr_fld_s;
-} ii_ibcr_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the header of a spurious read response       *
- * received from Crosstalk. A spurious read response is defined as a    *
- * read response received by II from a widget for which (1) the SIDN    *
- * has a value between 1 and 7, inclusive (II never sends requests to   *
- * these widgets (2) there is no valid IPRTE register which             *
- * corresponds to the TNUM, or (3) the widget indicated in SIDN is      *
- * not the same as the widget recorded in the IPRTE register            *
- * referenced by the TNUM. If this condition is true, and if the        *
- * IXSS[VALID] bit is clear, then the header of the spurious read       *
- * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The    *
- * errant header is thereby captured, and no further spurious read      *
- * respones are captured until IXSS[VALID] is cleared by setting the    *
- * appropriate bit in IECLR.Everytime a spurious read response is       *
- * detected, the SPUR_RD bit of the PRB corresponding to the incoming   *
- * message's SIDN field is set. This always happens, regarless of       *
- * whether a header is captured. The programmer should check            *
- * IXSM[SIDN] to determine which widget sent the spurious response,     *
- * because there may be more than one SPUR_RD bit set in the PRB        *
- * registers. The widget indicated by IXSM[SIDN] was the first          *
- * spurious read response to be received since the last time            *
- * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB      *
- * will be set. Any SPUR_RD bits in any other PRB registers indicate    *
- * spurious messages from other widets which were detected after the    *
- * header was captured..                                                *
- *									*
- ************************************************************************/
-
-typedef union ii_ixsm_u {
-	u64 ii_ixsm_regval;
-	struct {
-		u64 i_byte_en:32;
-		u64 i_reserved:1;
-		u64 i_tag:3;
-		u64 i_alt_pactyp:4;
-		u64 i_bo:1;
-		u64 i_error:1;
-		u64 i_vbpm:1;
-		u64 i_gbr:1;
-		u64 i_ds:2;
-		u64 i_ct:1;
-		u64 i_tnum:5;
-		u64 i_pactyp:4;
-		u64 i_sidn:4;
-		u64 i_didn:4;
-	} ii_ixsm_fld_s;
-} ii_ixsm_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the sideband bits of a spurious read         *
- * response received from Crosstalk.                                    *
- *									*
- ************************************************************************/
-
-typedef union ii_ixss_u {
-	u64 ii_ixss_regval;
-	struct {
-		u64 i_sideband:8;
-		u64 i_rsvd:55;
-		u64 i_valid:1;
-	} ii_ixss_fld_s;
-} ii_ixss_u_t;
-
-/************************************************************************
- *									*
- *  This register enables software to access the II LLP's test port.    *
- * Refer to the LLP 2.5 documentation for an explanation of the test    *
- * port. Software can write to this register to program the values      *
- * for the control fields (TestErrCapture, TestClear, TestFlit,         *
- * TestMask and TestSeed). Similarly, software can read from this       *
- * register to obtain the values of the test port's status outputs      *
- * (TestCBerr, TestValid and TestData).                                 *
- *									*
- ************************************************************************/
-
-typedef union ii_ilct_u {
-	u64 ii_ilct_regval;
-	struct {
-		u64 i_test_seed:20;
-		u64 i_test_mask:8;
-		u64 i_test_data:20;
-		u64 i_test_valid:1;
-		u64 i_test_cberr:1;
-		u64 i_test_flit:3;
-		u64 i_test_clear:1;
-		u64 i_test_err_capture:1;
-		u64 i_rsvd:9;
-	} ii_ilct_fld_s;
-} ii_ilct_u_t;
-
-/************************************************************************
- *									*
- *  If the II detects an illegal incoming Duplonet packet (request or   *
- * reply) when VALID==0 in the IIEPH1 register, then it saves the       *
- * contents of the packet's header flit in the IIEPH1 and IIEPH2        *
- * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit,     *
- * and assigns a value to the ERR_TYPE field which indicates the        *
- * specific nature of the error. The II recognizes four different       *
- * types of errors: short request packets (ERR_TYPE==2), short reply    *
- * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long   *
- * reply packets (ERR_TYPE==5). The encodings for these types of        *
- * errors were chosen to be consistent with the same types of errors    *
- * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in    *
- * the LB unit). If the II detects an illegal incoming Duplonet         *
- * packet when VALID==1 in the IIEPH1 register, then it merely sets     *
- * the OVERRUN bit to indicate that a subsequent error has happened,    *
- * and does nothing further.                                            *
- *									*
- ************************************************************************/
-
-typedef union ii_iieph1_u {
-	u64 ii_iieph1_regval;
-	struct {
-		u64 i_command:7;
-		u64 i_rsvd_5:1;
-		u64 i_suppl:14;
-		u64 i_rsvd_4:1;
-		u64 i_source:14;
-		u64 i_rsvd_3:1;
-		u64 i_err_type:4;
-		u64 i_rsvd_2:4;
-		u64 i_overrun:1;
-		u64 i_rsvd_1:3;
-		u64 i_valid:1;
-		u64 i_rsvd:13;
-	} ii_iieph1_fld_s;
-} ii_iieph1_u_t;
-
-/************************************************************************
- *									*
- *  This register holds the Address field from the header flit of an    *
- * incoming erroneous Duplonet packet, along with the tail bit which    *
- * accompanied this header flit. This register is essentially an        *
- * extension of IIEPH1. Two registers were necessary because the 64     *
- * bits available in only a single register were insufficient to        *
- * capture the entire header flit of an erroneous packet.               *
- *									*
- ************************************************************************/
-
-typedef union ii_iieph2_u {
-	u64 ii_iieph2_regval;
-	struct {
-		u64 i_rsvd_0:3;
-		u64 i_address:47;
-		u64 i_rsvd_1:10;
-		u64 i_tail:1;
-		u64 i_rsvd:3;
-	} ii_iieph2_fld_s;
-} ii_iieph2_u_t;
-
-/******************************/
-
-/************************************************************************
- *									*
- *  This register's value is a bit vector that guards access from SXBs  *
- * to local registers within the II as well as to external Crosstalk    *
- * widgets								*
- *									*
- ************************************************************************/
-
-typedef union ii_islapr_u {
-	u64 ii_islapr_regval;
-	struct {
-		u64 i_region:64;
-	} ii_islapr_fld_s;
-} ii_islapr_u_t;
-
-/************************************************************************
- *									*
- *  A write to this register of the 56-bit value "Pup+Bun" will cause	*
- * the bit in the ISLAPR register corresponding to the region of the	*
- * requestor to be set (access allowed).				(
- *									*
- ************************************************************************/
-
-typedef union ii_islapo_u {
-	u64 ii_islapo_regval;
-	struct {
-		u64 i_io_sbx_ovrride:56;
-		u64 i_rsvd:8;
-	} ii_islapo_fld_s;
-} ii_islapo_u_t;
-
-/************************************************************************
- *									*
- *  Determines how long the wrapper will wait aftr an interrupt is	*
- * initially issued from the II before it times out the outstanding	*
- * interrupt and drops it from the interrupt queue.			* 
- *									*
- ************************************************************************/
-
-typedef union ii_iwi_u {
-	u64 ii_iwi_regval;
-	struct {
-		u64 i_prescale:24;
-		u64 i_rsvd:8;
-		u64 i_timeout:8;
-		u64 i_rsvd1:8;
-		u64 i_intrpt_retry_period:8;
-		u64 i_rsvd2:8;
-	} ii_iwi_fld_s;
-} ii_iwi_u_t;
-
-/************************************************************************
- *									*
- *  Log errors which have occurred in the II wrapper. The errors are	*
- * cleared by writing to the IECLR register.				* 
- *									*
- ************************************************************************/
-
-typedef union ii_iwel_u {
-	u64 ii_iwel_regval;
-	struct {
-		u64 i_intr_timed_out:1;
-		u64 i_rsvd:7;
-		u64 i_cam_overflow:1;
-		u64 i_cam_read_miss:1;
-		u64 i_rsvd1:2;
-		u64 i_ioq_rep_underflow:1;
-		u64 i_ioq_req_underflow:1;
-		u64 i_ioq_rep_overflow:1;
-		u64 i_ioq_req_overflow:1;
-		u64 i_iiq_rep_overflow:1;
-		u64 i_iiq_req_overflow:1;
-		u64 i_rsvd2:6;
-		u64 i_ii_xn_rep_cred_over_under:1;
-		u64 i_ii_xn_req_cred_over_under:1;
-		u64 i_rsvd3:6;
-		u64 i_ii_xn_invalid_cmd:1;
-		u64 i_xn_ii_invalid_cmd:1;
-		u64 i_rsvd4:30;
-	} ii_iwel_fld_s;
-} ii_iwel_u_t;
-
-/************************************************************************
- *									*
- *  Controls the II wrapper.						* 
- *									*
- ************************************************************************/
-
-typedef union ii_iwc_u {
-	u64 ii_iwc_regval;
-	struct {
-		u64 i_dma_byte_swap:1;
-		u64 i_rsvd:3;
-		u64 i_cam_read_lines_reset:1;
-		u64 i_rsvd1:3;
-		u64 i_ii_xn_cred_over_under_log:1;
-		u64 i_rsvd2:19;
-		u64 i_xn_rep_iq_depth:5;
-		u64 i_rsvd3:3;
-		u64 i_xn_req_iq_depth:5;
-		u64 i_rsvd4:3;
-		u64 i_iiq_depth:6;
-		u64 i_rsvd5:12;
-		u64 i_force_rep_cred:1;
-		u64 i_force_req_cred:1;
-	} ii_iwc_fld_s;
-} ii_iwc_u_t;
-
-/************************************************************************
- *									*
- *  Status in the II wrapper.						* 
- *									*
- ************************************************************************/
-
-typedef union ii_iws_u {
-	u64 ii_iws_regval;
-	struct {
-		u64 i_xn_rep_iq_credits:5;
-		u64 i_rsvd:3;
-		u64 i_xn_req_iq_credits:5;
-		u64 i_rsvd1:51;
-	} ii_iws_fld_s;
-} ii_iws_u_t;
-
-/************************************************************************
- *									*
- *  Masks errors in the IWEL register.					*
- *									*
- ************************************************************************/
-
-typedef union ii_iweim_u {
-	u64 ii_iweim_regval;
-	struct {
-		u64 i_intr_timed_out:1;
-		u64 i_rsvd:7;
-		u64 i_cam_overflow:1;
-		u64 i_cam_read_miss:1;
-		u64 i_rsvd1:2;
-		u64 i_ioq_rep_underflow:1;
-		u64 i_ioq_req_underflow:1;
-		u64 i_ioq_rep_overflow:1;
-		u64 i_ioq_req_overflow:1;
-		u64 i_iiq_rep_overflow:1;
-		u64 i_iiq_req_overflow:1;
-		u64 i_rsvd2:6;
-		u64 i_ii_xn_rep_cred_overflow:1;
-		u64 i_ii_xn_req_cred_overflow:1;
-		u64 i_rsvd3:6;
-		u64 i_ii_xn_invalid_cmd:1;
-		u64 i_xn_ii_invalid_cmd:1;
-		u64 i_rsvd4:30;
-	} ii_iweim_fld_s;
-} ii_iweim_u_t;
-
-/************************************************************************
- *									*
- *  A write to this register causes a particular field in the           *
- * corresponding widget's PRB entry to be adjusted up or down by 1.     *
- * This counter should be used when recovering from error and reset     *
- * conditions. Note that software would be capable of causing           *
- * inadvertent overflow or underflow of these counters.                 *
- *									*
- ************************************************************************/
-
-typedef union ii_ipca_u {
-	u64 ii_ipca_regval;
-	struct {
-		u64 i_wid:4;
-		u64 i_adjust:1;
-		u64 i_rsvd_1:3;
-		u64 i_field:2;
-		u64 i_rsvd:54;
-	} ii_ipca_fld_s;
-} ii_ipca_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte0a_u {
-	u64 ii_iprte0a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprte0a_fld_s;
-} ii_iprte0a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte1a_u {
-	u64 ii_iprte1a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprte1a_fld_s;
-} ii_iprte1a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte2a_u {
-	u64 ii_iprte2a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprte2a_fld_s;
-} ii_iprte2a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte3a_u {
-	u64 ii_iprte3a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprte3a_fld_s;
-} ii_iprte3a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte4a_u {
-	u64 ii_iprte4a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprte4a_fld_s;
-} ii_iprte4a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte5a_u {
-	u64 ii_iprte5a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprte5a_fld_s;
-} ii_iprte5a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte6a_u {
-	u64 ii_iprte6a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprte6a_fld_s;
-} ii_iprte6a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte7a_u {
-	u64 ii_iprte7a_regval;
-	struct {
-		u64 i_rsvd_1:54;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} ii_iprtea7_fld_s;
-} ii_iprte7a_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte0b_u {
-	u64 ii_iprte0b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-	} ii_iprte0b_fld_s;
-} ii_iprte0b_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte1b_u {
-	u64 ii_iprte1b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-	} ii_iprte1b_fld_s;
-} ii_iprte1b_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte2b_u {
-	u64 ii_iprte2b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-	} ii_iprte2b_fld_s;
-} ii_iprte2b_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte3b_u {
-	u64 ii_iprte3b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-	} ii_iprte3b_fld_s;
-} ii_iprte3b_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte4b_u {
-	u64 ii_iprte4b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-	} ii_iprte4b_fld_s;
-} ii_iprte4b_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte5b_u {
-	u64 ii_iprte5b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-	} ii_iprte5b_fld_s;
-} ii_iprte5b_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte6b_u {
-	u64 ii_iprte6b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-
-	} ii_iprte6b_fld_s;
-} ii_iprte6b_u_t;
-
-/************************************************************************
- *									*
- *  There are 8 instances of this register. This register contains      *
- * the information that the II has to remember once it has launched a   *
- * PIO Read operation. The contents are used to form the correct        *
- * Router Network packet and direct the Crosstalk reply to the          *
- * appropriate processor.                                               *
- *									*
- ************************************************************************/
-
-typedef union ii_iprte7b_u {
-	u64 ii_iprte7b_regval;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_address:47;
-		u64 i_init:3;
-		u64 i_source:11;
-	} ii_iprte7b_fld_s;
-} ii_iprte7b_u_t;
-
-/************************************************************************
- *									*
- * Description:  SHub II contains a feature which did not exist in      *
- * the Hub which automatically cleans up after a Read Response          *
- * timeout, including deallocation of the IPRTE and recovery of IBuf    *
- * space. The inclusion of this register in SHub is for backward        *
- * compatibility                                                        *
- * A write to this register causes an entry from the table of           *
- * outstanding PIO Read Requests to be freed and returned to the        *
- * stack of free entries. This register is used in handling the         *
- * timeout errors that result in a PIO Reply never returning from       *
- * Crosstalk.                                                           *
- * Note that this register does not affect the contents of the IPRTE    *
- * registers. The Valid bits in those registers have to be              *
- * specifically turned off by software.                                 *
- *									*
- ************************************************************************/
-
-typedef union ii_ipdr_u {
-	u64 ii_ipdr_regval;
-	struct {
-		u64 i_te:3;
-		u64 i_rsvd_1:1;
-		u64 i_pnd:1;
-		u64 i_init_rpcnt:1;
-		u64 i_rsvd:58;
-	} ii_ipdr_fld_s;
-} ii_ipdr_u_t;
-
-/************************************************************************
- *									*
- *  A write to this register causes a CRB entry to be returned to the   *
- * queue of free CRBs. The entry should have previously been cleared    *
- * (mark bit) via backdoor access to the pertinent CRB entry. This      *
- * register is used in the last step of handling the errors that are    *
- * captured and marked in CRB entries.  Briefly: 1) first error for     *
- * DMA write from a particular device, and first error for a            *
- * particular BTE stream, lead to a marked CRB entry, and processor     *
- * interrupt, 2) software reads the error information captured in the   *
- * CRB entry, and presumably takes some corrective action, 3)           *
- * software clears the mark bit, and finally 4) software writes to      *
- * the ICDR register to return the CRB entry to the list of free CRB    *
- * entries.                                                             *
- *									*
- ************************************************************************/
-
-typedef union ii_icdr_u {
-	u64 ii_icdr_regval;
-	struct {
-		u64 i_crb_num:4;
-		u64 i_pnd:1;
-		u64 i_rsvd:59;
-	} ii_icdr_fld_s;
-} ii_icdr_u_t;
-
-/************************************************************************
- *									*
- *  This register provides debug access to two FIFOs inside of II.      *
- * Both IOQ_MAX* fields of this register contain the instantaneous      *
- * depth (in units of the number of available entries) of the           *
- * associated IOQ FIFO.  A read of this register will return the        *
- * number of free entries on each FIFO at the time of the read.  So     *
- * when a FIFO is idle, the associated field contains the maximum       *
- * depth of the FIFO.  This register is writable for debug reasons      *
- * and is intended to be written with the maximum desired FIFO depth    *
- * while the FIFO is idle. Software must assure that II is idle when    *
- * this register is written. If there are any active entries in any     *
- * of these FIFOs when this register is written, the results are        *
- * undefined.                                                           *
- *									*
- ************************************************************************/
-
-typedef union ii_ifdr_u {
-	u64 ii_ifdr_regval;
-	struct {
-		u64 i_ioq_max_rq:7;
-		u64 i_set_ioq_rq:1;
-		u64 i_ioq_max_rp:7;
-		u64 i_set_ioq_rp:1;
-		u64 i_rsvd:48;
-	} ii_ifdr_fld_s;
-} ii_ifdr_u_t;
-
-/************************************************************************
- *									*
- *  This register allows the II to become sluggish in removing          *
- * messages from its inbound queue (IIQ). This will cause messages to   *
- * back up in either virtual channel. Disabling the "molasses" mode     *
- * subsequently allows the II to be tested under stress. In the         *
- * sluggish ("Molasses") mode, the localized effects of congestion      *
- * can be observed.                                                     *
- *									*
- ************************************************************************/
-
-typedef union ii_iiap_u {
-	u64 ii_iiap_regval;
-	struct {
-		u64 i_rq_mls:6;
-		u64 i_rsvd_1:2;
-		u64 i_rp_mls:6;
-		u64 i_rsvd:50;
-	} ii_iiap_fld_s;
-} ii_iiap_u_t;
-
-/************************************************************************
- *									*
- *  This register allows several parameters of CRB operation to be      *
- * set. Note that writing to this register can have catastrophic side   *
- * effects, if the CRB is not quiescent, i.e. if the CRB is             *
- * processing protocol messages when the write occurs.                  *
- *									*
- ************************************************************************/
-
-typedef union ii_icmr_u {
-	u64 ii_icmr_regval;
-	struct {
-		u64 i_sp_msg:1;
-		u64 i_rd_hdr:1;
-		u64 i_rsvd_4:2;
-		u64 i_c_cnt:4;
-		u64 i_rsvd_3:4;
-		u64 i_clr_rqpd:1;
-		u64 i_clr_rppd:1;
-		u64 i_rsvd_2:2;
-		u64 i_fc_cnt:4;
-		u64 i_crb_vld:15;
-		u64 i_crb_mark:15;
-		u64 i_rsvd_1:2;
-		u64 i_precise:1;
-		u64 i_rsvd:11;
-	} ii_icmr_fld_s;
-} ii_icmr_u_t;
-
-/************************************************************************
- *									*
- *  This register allows control of the table portion of the CRB        *
- * logic via software. Control operations from this register have       *
- * priority over all incoming Crosstalk or BTE requests.                *
- *									*
- ************************************************************************/
-
-typedef union ii_iccr_u {
-	u64 ii_iccr_regval;
-	struct {
-		u64 i_crb_num:4;
-		u64 i_rsvd_1:4;
-		u64 i_cmd:8;
-		u64 i_pending:1;
-		u64 i_rsvd:47;
-	} ii_iccr_fld_s;
-} ii_iccr_u_t;
-
-/************************************************************************
- *									*
- *  This register allows the maximum timeout value to be programmed.    *
- *									*
- ************************************************************************/
-
-typedef union ii_icto_u {
-	u64 ii_icto_regval;
-	struct {
-		u64 i_timeout:8;
-		u64 i_rsvd:56;
-	} ii_icto_fld_s;
-} ii_icto_u_t;
-
-/************************************************************************
- *									*
- *  This register allows the timeout prescalar to be programmed. An     *
- * internal counter is associated with this register. When the          *
- * internal counter reaches the value of the PRESCALE field, the        *
- * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT]   *
- * field). The internal counter resets to zero, and then continues      *
- * counting.                                                            *
- *									*
- ************************************************************************/
-
-typedef union ii_ictp_u {
-	u64 ii_ictp_regval;
-	struct {
-		u64 i_prescale:24;
-		u64 i_rsvd:40;
-	} ii_ictp_fld_s;
-} ii_ictp_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
- * used for Crosstalk operations (both cacheline and partial            *
- * operations) or BTE/IO. Because the CRB entries are very wide, five   *
- * registers (_A to _E) are required to read and write each entry.      *
- * The CRB Entry registers can be conceptualized as rows and columns    *
- * (illustrated in the table above). Each row contains the 4            *
- * registers required for a single CRB Entry. The first doubleword      *
- * (column) for each entry is labeled A, and the second doubleword      *
- * (higher address) is labeled B, the third doubleword is labeled C,    *
- * the fourth doubleword is labeled D and the fifth doubleword is       *
- * labeled E. All CRB entries have their addresses on a quarter         *
- * cacheline aligned boundary.                   *
- * Upon reset, only the following fields are initialized: valid         *
- * (VLD), priority count, timeout, timeout valid, and context valid.    *
- * All other bits should be cleared by software before use (after       *
- * recovering any potential error state from before the reset).         *
- * The following four tables summarize the format for the four          *
- * registers that are used for each ICRB# Entry.                        *
- *									*
- ************************************************************************/
-
-typedef union ii_icrb0_a_u {
-	u64 ii_icrb0_a_regval;
-	struct {
-		u64 ia_iow:1;
-		u64 ia_vld:1;
-		u64 ia_addr:47;
-		u64 ia_tnum:5;
-		u64 ia_sidn:4;
-		u64 ia_rsvd:6;
-	} ii_icrb0_a_fld_s;
-} ii_icrb0_a_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
- * used for Crosstalk operations (both cacheline and partial            *
- * operations) or BTE/IO. Because the CRB entries are very wide, five   *
- * registers (_A to _E) are required to read and write each entry.      *
- *									*
- ************************************************************************/
-
-typedef union ii_icrb0_b_u {
-	u64 ii_icrb0_b_regval;
-	struct {
-		u64 ib_xt_err:1;
-		u64 ib_mark:1;
-		u64 ib_ln_uce:1;
-		u64 ib_errcode:3;
-		u64 ib_error:1;
-		u64 ib_stall__bte_1:1;
-		u64 ib_stall__bte_0:1;
-		u64 ib_stall__intr:1;
-		u64 ib_stall_ib:1;
-		u64 ib_intvn:1;
-		u64 ib_wb:1;
-		u64 ib_hold:1;
-		u64 ib_ack:1;
-		u64 ib_resp:1;
-		u64 ib_ack_cnt:11;
-		u64 ib_rsvd:7;
-		u64 ib_exc:5;
-		u64 ib_init:3;
-		u64 ib_imsg:8;
-		u64 ib_imsgtype:2;
-		u64 ib_use_old:1;
-		u64 ib_rsvd_1:11;
-	} ii_icrb0_b_fld_s;
-} ii_icrb0_b_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
- * used for Crosstalk operations (both cacheline and partial            *
- * operations) or BTE/IO. Because the CRB entries are very wide, five   *
- * registers (_A to _E) are required to read and write each entry.      *
- *									*
- ************************************************************************/
-
-typedef union ii_icrb0_c_u {
-	u64 ii_icrb0_c_regval;
-	struct {
-		u64 ic_source:15;
-		u64 ic_size:2;
-		u64 ic_ct:1;
-		u64 ic_bte_num:1;
-		u64 ic_gbr:1;
-		u64 ic_resprqd:1;
-		u64 ic_bo:1;
-		u64 ic_suppl:15;
-		u64 ic_rsvd:27;
-	} ii_icrb0_c_fld_s;
-} ii_icrb0_c_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
- * used for Crosstalk operations (both cacheline and partial            *
- * operations) or BTE/IO. Because the CRB entries are very wide, five   *
- * registers (_A to _E) are required to read and write each entry.      *
- *									*
- ************************************************************************/
-
-typedef union ii_icrb0_d_u {
-	u64 ii_icrb0_d_regval;
-	struct {
-		u64 id_pa_be:43;
-		u64 id_bte_op:1;
-		u64 id_pr_psc:4;
-		u64 id_pr_cnt:4;
-		u64 id_sleep:1;
-		u64 id_rsvd:11;
-	} ii_icrb0_d_fld_s;
-} ii_icrb0_d_u_t;
-
-/************************************************************************
- *									*
- * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
- * used for Crosstalk operations (both cacheline and partial            *
- * operations) or BTE/IO. Because the CRB entries are very wide, five   *
- * registers (_A to _E) are required to read and write each entry.      *
- *									*
- ************************************************************************/
-
-typedef union ii_icrb0_e_u {
-	u64 ii_icrb0_e_regval;
-	struct {
-		u64 ie_timeout:8;
-		u64 ie_context:15;
-		u64 ie_rsvd:1;
-		u64 ie_tvld:1;
-		u64 ie_cvld:1;
-		u64 ie_rsvd_0:38;
-	} ii_icrb0_e_fld_s;
-} ii_icrb0_e_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the lower 64 bits of the header of the       *
- * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
- * register is set.                                                     *
- *									*
- ************************************************************************/
-
-typedef union ii_icsml_u {
-	u64 ii_icsml_regval;
-	struct {
-		u64 i_tt_addr:47;
-		u64 i_newsuppl_ex:14;
-		u64 i_reserved:2;
-		u64 i_overflow:1;
-	} ii_icsml_fld_s;
-} ii_icsml_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the middle 64 bits of the header of the      *
- * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
- * register is set.                                                     *
- *									*
- ************************************************************************/
-
-typedef union ii_icsmm_u {
-	u64 ii_icsmm_regval;
-	struct {
-		u64 i_tt_ack_cnt:11;
-		u64 i_reserved:53;
-	} ii_icsmm_fld_s;
-} ii_icsmm_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the microscopic state, all the inputs to     *
- * the protocol table, captured with the spurious message. Valid when   *
- * the SP_MSG bit in the ICMR register is set.                          *
- *									*
- ************************************************************************/
-
-typedef union ii_icsmh_u {
-	u64 ii_icsmh_regval;
-	struct {
-		u64 i_tt_vld:1;
-		u64 i_xerr:1;
-		u64 i_ft_cwact_o:1;
-		u64 i_ft_wact_o:1;
-		u64 i_ft_active_o:1;
-		u64 i_sync:1;
-		u64 i_mnusg:1;
-		u64 i_mnusz:1;
-		u64 i_plusz:1;
-		u64 i_plusg:1;
-		u64 i_tt_exc:5;
-		u64 i_tt_wb:1;
-		u64 i_tt_hold:1;
-		u64 i_tt_ack:1;
-		u64 i_tt_resp:1;
-		u64 i_tt_intvn:1;
-		u64 i_g_stall_bte1:1;
-		u64 i_g_stall_bte0:1;
-		u64 i_g_stall_il:1;
-		u64 i_g_stall_ib:1;
-		u64 i_tt_imsg:8;
-		u64 i_tt_imsgtype:2;
-		u64 i_tt_use_old:1;
-		u64 i_tt_respreqd:1;
-		u64 i_tt_bte_num:1;
-		u64 i_cbn:1;
-		u64 i_match:1;
-		u64 i_rpcnt_lt_34:1;
-		u64 i_rpcnt_ge_34:1;
-		u64 i_rpcnt_lt_18:1;
-		u64 i_rpcnt_ge_18:1;
-		u64 i_rpcnt_lt_2:1;
-		u64 i_rpcnt_ge_2:1;
-		u64 i_rqcnt_lt_18:1;
-		u64 i_rqcnt_ge_18:1;
-		u64 i_rqcnt_lt_2:1;
-		u64 i_rqcnt_ge_2:1;
-		u64 i_tt_device:7;
-		u64 i_tt_init:3;
-		u64 i_reserved:5;
-	} ii_icsmh_fld_s;
-} ii_icsmh_u_t;
-
-/************************************************************************
- *									*
- *  The Shub DEBUG unit provides a 3-bit selection signal to the        *
- * II core and a 3-bit selection signal to the fsbclk domain in the II  *
- * wrapper.                                                             *
- *									*
- ************************************************************************/
-
-typedef union ii_idbss_u {
-	u64 ii_idbss_regval;
-	struct {
-		u64 i_iioclk_core_submenu:3;
-		u64 i_rsvd:5;
-		u64 i_fsbclk_wrapper_submenu:3;
-		u64 i_rsvd_1:5;
-		u64 i_iioclk_menu:5;
-		u64 i_rsvd_2:43;
-	} ii_idbss_fld_s;
-} ii_idbss_u_t;
-
-/************************************************************************
- *									*
- * Description:  This register is used to set up the length for a       *
- * transfer and then to monitor the progress of that transfer. This     *
- * register needs to be initialized before a transfer is started. A     *
- * legitimate write to this register will set the Busy bit, clear the   *
- * Error bit, and initialize the length to the value desired.           *
- * While the transfer is in progress, hardware will decrement the       *
- * length field with each successful block that is copied. Once the     *
- * transfer completes, hardware will clear the Busy bit. The length     *
- * field will also contain the number of cache lines left to be         *
- * transferred.                                                         *
- *									*
- ************************************************************************/
-
-typedef union ii_ibls0_u {
-	u64 ii_ibls0_regval;
-	struct {
-		u64 i_length:16;
-		u64 i_error:1;
-		u64 i_rsvd_1:3;
-		u64 i_busy:1;
-		u64 i_rsvd:43;
-	} ii_ibls0_fld_s;
-} ii_ibls0_u_t;
-
-/************************************************************************
- *									*
- *  This register should be loaded before a transfer is started. The    *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
- * address as described in Section 1.3, Figure2 and Figure3. Since      *
- * the bottom 7 bits of the address are always taken to be zero, BTE    *
- * transfers are always cacheline-aligned.                              *
- *									*
- ************************************************************************/
-
-typedef union ii_ibsa0_u {
-	u64 ii_ibsa0_regval;
-	struct {
-		u64 i_rsvd_1:7;
-		u64 i_addr:42;
-		u64 i_rsvd:15;
-	} ii_ibsa0_fld_s;
-} ii_ibsa0_u_t;
-
-/************************************************************************
- *									*
- *  This register should be loaded before a transfer is started. The    *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
- * address as described in Section 1.3, Figure2 and Figure3. Since      *
- * the bottom 7 bits of the address are always taken to be zero, BTE    *
- * transfers are always cacheline-aligned.                              *
- *									*
- ************************************************************************/
-
-typedef union ii_ibda0_u {
-	u64 ii_ibda0_regval;
-	struct {
-		u64 i_rsvd_1:7;
-		u64 i_addr:42;
-		u64 i_rsvd:15;
-	} ii_ibda0_fld_s;
-} ii_ibda0_u_t;
-
-/************************************************************************
- *									*
- *  Writing to this register sets up the attributes of the transfer     *
- * and initiates the transfer operation. Reading this register has      *
- * the side effect of terminating any transfer in progress. Note:       *
- * stopping a transfer midstream could have an adverse impact on the    *
- * other BTE. If a BTE stream has to be stopped (due to error           *
- * handling for example), both BTE streams should be stopped and        *
- * their transfers discarded.                                           *
- *									*
- ************************************************************************/
-
-typedef union ii_ibct0_u {
-	u64 ii_ibct0_regval;
-	struct {
-		u64 i_zerofill:1;
-		u64 i_rsvd_2:3;
-		u64 i_notify:1;
-		u64 i_rsvd_1:3;
-		u64 i_poison:1;
-		u64 i_rsvd:55;
-	} ii_ibct0_fld_s;
-} ii_ibct0_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the address to which the WINV is sent.       *
- * This address has to be cache line aligned.                           *
- *									*
- ************************************************************************/
-
-typedef union ii_ibna0_u {
-	u64 ii_ibna0_regval;
-	struct {
-		u64 i_rsvd_1:7;
-		u64 i_addr:42;
-		u64 i_rsvd:15;
-	} ii_ibna0_fld_s;
-} ii_ibna0_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the programmable level as well as the node   *
- * ID and PI unit of the processor to which the interrupt will be       *
- * sent.								*
- *									*
- ************************************************************************/
-
-typedef union ii_ibia0_u {
-	u64 ii_ibia0_regval;
-	struct {
-		u64 i_rsvd_2:1;
-		u64 i_node_id:11;
-		u64 i_rsvd_1:4;
-		u64 i_level:7;
-		u64 i_rsvd:41;
-	} ii_ibia0_fld_s;
-} ii_ibia0_u_t;
-
-/************************************************************************
- *									*
- * Description:  This register is used to set up the length for a       *
- * transfer and then to monitor the progress of that transfer. This     *
- * register needs to be initialized before a transfer is started. A     *
- * legitimate write to this register will set the Busy bit, clear the   *
- * Error bit, and initialize the length to the value desired.           *
- * While the transfer is in progress, hardware will decrement the       *
- * length field with each successful block that is copied. Once the     *
- * transfer completes, hardware will clear the Busy bit. The length     *
- * field will also contain the number of cache lines left to be         *
- * transferred.                                                         *
- *									*
- ************************************************************************/
-
-typedef union ii_ibls1_u {
-	u64 ii_ibls1_regval;
-	struct {
-		u64 i_length:16;
-		u64 i_error:1;
-		u64 i_rsvd_1:3;
-		u64 i_busy:1;
-		u64 i_rsvd:43;
-	} ii_ibls1_fld_s;
-} ii_ibls1_u_t;
-
-/************************************************************************
- *									*
- *  This register should be loaded before a transfer is started. The    *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
- * address as described in Section 1.3, Figure2 and Figure3. Since      *
- * the bottom 7 bits of the address are always taken to be zero, BTE    *
- * transfers are always cacheline-aligned.                              *
- *									*
- ************************************************************************/
-
-typedef union ii_ibsa1_u {
-	u64 ii_ibsa1_regval;
-	struct {
-		u64 i_rsvd_1:7;
-		u64 i_addr:33;
-		u64 i_rsvd:24;
-	} ii_ibsa1_fld_s;
-} ii_ibsa1_u_t;
-
-/************************************************************************
- *									*
- *  This register should be loaded before a transfer is started. The    *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
- * address as described in Section 1.3, Figure2 and Figure3. Since      *
- * the bottom 7 bits of the address are always taken to be zero, BTE    *
- * transfers are always cacheline-aligned.                              *
- *									*
- ************************************************************************/
-
-typedef union ii_ibda1_u {
-	u64 ii_ibda1_regval;
-	struct {
-		u64 i_rsvd_1:7;
-		u64 i_addr:33;
-		u64 i_rsvd:24;
-	} ii_ibda1_fld_s;
-} ii_ibda1_u_t;
-
-/************************************************************************
- *									*
- *  Writing to this register sets up the attributes of the transfer     *
- * and initiates the transfer operation. Reading this register has      *
- * the side effect of terminating any transfer in progress. Note:       *
- * stopping a transfer midstream could have an adverse impact on the    *
- * other BTE. If a BTE stream has to be stopped (due to error           *
- * handling for example), both BTE streams should be stopped and        *
- * their transfers discarded.                                           *
- *									*
- ************************************************************************/
-
-typedef union ii_ibct1_u {
-	u64 ii_ibct1_regval;
-	struct {
-		u64 i_zerofill:1;
-		u64 i_rsvd_2:3;
-		u64 i_notify:1;
-		u64 i_rsvd_1:3;
-		u64 i_poison:1;
-		u64 i_rsvd:55;
-	} ii_ibct1_fld_s;
-} ii_ibct1_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the address to which the WINV is sent.       *
- * This address has to be cache line aligned.                           *
- *									*
- ************************************************************************/
-
-typedef union ii_ibna1_u {
-	u64 ii_ibna1_regval;
-	struct {
-		u64 i_rsvd_1:7;
-		u64 i_addr:33;
-		u64 i_rsvd:24;
-	} ii_ibna1_fld_s;
-} ii_ibna1_u_t;
-
-/************************************************************************
- *									*
- *  This register contains the programmable level as well as the node   *
- * ID and PI unit of the processor to which the interrupt will be       *
- * sent.								*
- *									*
- ************************************************************************/
-
-typedef union ii_ibia1_u {
-	u64 ii_ibia1_regval;
-	struct {
-		u64 i_pi_id:1;
-		u64 i_node_id:8;
-		u64 i_rsvd_1:7;
-		u64 i_level:7;
-		u64 i_rsvd:41;
-	} ii_ibia1_fld_s;
-} ii_ibia1_u_t;
-
-/************************************************************************
- *									*
- *  This register defines the resources that feed information into      *
- * the two performance counters located in the IO Performance           *
- * Profiling Register. There are 17 different quantities that can be    *
- * measured. Given these 17 different options, the two performance      *
- * counters have 15 of them in common; menu selections 0 through 0xE    *
- * are identical for each performance counter. As for the other two     *
- * options, one is available from one performance counter and the       *
- * other is available from the other performance counter. Hence, the    *
- * II supports all 17*16=272 possible combinations of quantities to     *
- * measure.                                                             *
- *									*
- ************************************************************************/
-
-typedef union ii_ipcr_u {
-	u64 ii_ipcr_regval;
-	struct {
-		u64 i_ippr0_c:4;
-		u64 i_ippr1_c:4;
-		u64 i_icct:8;
-		u64 i_rsvd:48;
-	} ii_ipcr_fld_s;
-} ii_ipcr_u_t;
-
-/************************************************************************
- *									*
- *									*
- *									*
- ************************************************************************/
-
-typedef union ii_ippr_u {
-	u64 ii_ippr_regval;
-	struct {
-		u64 i_ippr0:32;
-		u64 i_ippr1:32;
-	} ii_ippr_fld_s;
-} ii_ippr_u_t;
-
-/************************************************************************
- *									*
- * The following defines which were not formed into structures are	*
- * probably indentical to another register, and the name of the		*
- * register is provided against each of these registers. This		*
- * information needs to be checked carefully				*
- *									*
- *		IIO_ICRB1_A		IIO_ICRB0_A			*
- *		IIO_ICRB1_B		IIO_ICRB0_B			*
- *		IIO_ICRB1_C		IIO_ICRB0_C			*
- *		IIO_ICRB1_D		IIO_ICRB0_D			*
- *		IIO_ICRB1_E		IIO_ICRB0_E			*
- *		IIO_ICRB2_A		IIO_ICRB0_A			*
- *		IIO_ICRB2_B		IIO_ICRB0_B			*
- *		IIO_ICRB2_C		IIO_ICRB0_C			*
- *		IIO_ICRB2_D		IIO_ICRB0_D			*
- *		IIO_ICRB2_E		IIO_ICRB0_E			*
- *		IIO_ICRB3_A		IIO_ICRB0_A			*
- *		IIO_ICRB3_B		IIO_ICRB0_B			*
- *		IIO_ICRB3_C		IIO_ICRB0_C			*
- *		IIO_ICRB3_D		IIO_ICRB0_D			*
- *		IIO_ICRB3_E		IIO_ICRB0_E			*
- *		IIO_ICRB4_A		IIO_ICRB0_A			*
- *		IIO_ICRB4_B		IIO_ICRB0_B			*
- *		IIO_ICRB4_C		IIO_ICRB0_C			*
- *		IIO_ICRB4_D		IIO_ICRB0_D			*
- *		IIO_ICRB4_E		IIO_ICRB0_E			*
- *		IIO_ICRB5_A		IIO_ICRB0_A			*
- *		IIO_ICRB5_B		IIO_ICRB0_B			*
- *		IIO_ICRB5_C		IIO_ICRB0_C			*
- *		IIO_ICRB5_D		IIO_ICRB0_D			*
- *		IIO_ICRB5_E		IIO_ICRB0_E			*
- *		IIO_ICRB6_A		IIO_ICRB0_A			*
- *		IIO_ICRB6_B		IIO_ICRB0_B			*
- *		IIO_ICRB6_C		IIO_ICRB0_C			*
- *		IIO_ICRB6_D		IIO_ICRB0_D			*
- *		IIO_ICRB6_E		IIO_ICRB0_E			*
- *		IIO_ICRB7_A		IIO_ICRB0_A			*
- *		IIO_ICRB7_B		IIO_ICRB0_B			*
- *		IIO_ICRB7_C		IIO_ICRB0_C			*
- *		IIO_ICRB7_D		IIO_ICRB0_D			*
- *		IIO_ICRB7_E		IIO_ICRB0_E			*
- *		IIO_ICRB8_A		IIO_ICRB0_A			*
- *		IIO_ICRB8_B		IIO_ICRB0_B			*
- *		IIO_ICRB8_C		IIO_ICRB0_C			*
- *		IIO_ICRB8_D		IIO_ICRB0_D			*
- *		IIO_ICRB8_E		IIO_ICRB0_E			*
- *		IIO_ICRB9_A		IIO_ICRB0_A			*
- *		IIO_ICRB9_B		IIO_ICRB0_B			*
- *		IIO_ICRB9_C		IIO_ICRB0_C			*
- *		IIO_ICRB9_D		IIO_ICRB0_D			*
- *		IIO_ICRB9_E		IIO_ICRB0_E			*
- *		IIO_ICRBA_A		IIO_ICRB0_A			*
- *		IIO_ICRBA_B		IIO_ICRB0_B			*
- *		IIO_ICRBA_C		IIO_ICRB0_C			*
- *		IIO_ICRBA_D		IIO_ICRB0_D			*
- *		IIO_ICRBA_E		IIO_ICRB0_E			*
- *		IIO_ICRBB_A		IIO_ICRB0_A			*
- *		IIO_ICRBB_B		IIO_ICRB0_B			*
- *		IIO_ICRBB_C		IIO_ICRB0_C			*
- *		IIO_ICRBB_D		IIO_ICRB0_D			*
- *		IIO_ICRBB_E		IIO_ICRB0_E			*
- *		IIO_ICRBC_A		IIO_ICRB0_A			*
- *		IIO_ICRBC_B		IIO_ICRB0_B			*
- *		IIO_ICRBC_C		IIO_ICRB0_C			*
- *		IIO_ICRBC_D		IIO_ICRB0_D			*
- *		IIO_ICRBC_E		IIO_ICRB0_E			*
- *		IIO_ICRBD_A		IIO_ICRB0_A			*
- *		IIO_ICRBD_B		IIO_ICRB0_B			*
- *		IIO_ICRBD_C		IIO_ICRB0_C			*
- *		IIO_ICRBD_D		IIO_ICRB0_D			*
- *		IIO_ICRBD_E		IIO_ICRB0_E			*
- *		IIO_ICRBE_A		IIO_ICRB0_A			*
- *		IIO_ICRBE_B		IIO_ICRB0_B			*
- *		IIO_ICRBE_C		IIO_ICRB0_C			*
- *		IIO_ICRBE_D		IIO_ICRB0_D			*
- *		IIO_ICRBE_E		IIO_ICRB0_E			*
- *									*
- ************************************************************************/
-
-/*
- * Slightly friendlier names for some common registers.
- */
-#define IIO_WIDGET              IIO_WID		/* Widget identification */
-#define IIO_WIDGET_STAT         IIO_WSTAT	/* Widget status register */
-#define IIO_WIDGET_CTRL         IIO_WCR		/* Widget control register */
-#define IIO_PROTECT             IIO_ILAPR	/* IO interface protection */
-#define IIO_PROTECT_OVRRD       IIO_ILAPO	/* IO protect override */
-#define IIO_OUTWIDGET_ACCESS    IIO_IOWA	/* Outbound widget access */
-#define IIO_INWIDGET_ACCESS     IIO_IIWA	/* Inbound widget access */
-#define IIO_INDEV_ERR_MASK      IIO_IIDEM	/* Inbound device error mask */
-#define IIO_LLP_CSR             IIO_ILCSR	/* LLP control and status */
-#define IIO_LLP_LOG             IIO_ILLR	/* LLP log */
-#define IIO_XTALKCC_TOUT        IIO_IXCC	/* Xtalk credit count timeout */
-#define IIO_XTALKTT_TOUT        IIO_IXTT	/* Xtalk tail timeout */
-#define IIO_IO_ERR_CLR          IIO_IECLR	/* IO error clear */
-#define IIO_IGFX_0 		IIO_IGFX0
-#define IIO_IGFX_1 		IIO_IGFX1
-#define IIO_IBCT_0		IIO_IBCT0
-#define IIO_IBCT_1		IIO_IBCT1
-#define IIO_IBLS_0		IIO_IBLS0
-#define IIO_IBLS_1		IIO_IBLS1
-#define IIO_IBSA_0		IIO_IBSA0
-#define IIO_IBSA_1		IIO_IBSA1
-#define IIO_IBDA_0		IIO_IBDA0
-#define IIO_IBDA_1		IIO_IBDA1
-#define IIO_IBNA_0		IIO_IBNA0
-#define IIO_IBNA_1		IIO_IBNA1
-#define IIO_IBIA_0		IIO_IBIA0
-#define IIO_IBIA_1		IIO_IBIA1
-#define IIO_IOPRB_0		IIO_IPRB0
-
-#define IIO_PRTE_A(_x)		(IIO_IPRTE0_A + (8 * (_x)))
-#define IIO_PRTE_B(_x)		(IIO_IPRTE0_B + (8 * (_x)))
-#define IIO_NUM_PRTES		8	/* Total number of PRB table entries */
-#define IIO_WIDPRTE_A(x)	IIO_PRTE_A(((x) - 8))	/* widget ID to its PRTE num */
-#define IIO_WIDPRTE_B(x)	IIO_PRTE_B(((x) - 8))	/* widget ID to its PRTE num */
-
-#define IIO_NUM_IPRBS 		9
-
-#define IIO_LLP_CSR_IS_UP		0x00002000
-#define IIO_LLP_CSR_LLP_STAT_MASK       0x00003000
-#define IIO_LLP_CSR_LLP_STAT_SHFT       12
-
-#define IIO_LLP_CB_MAX  0xffff	/* in ILLR CB_CNT, Max Check Bit errors */
-#define IIO_LLP_SN_MAX  0xffff	/* in ILLR SN_CNT, Max Sequence Number errors */
-
-/* key to IIO_PROTECT_OVRRD */
-#define IIO_PROTECT_OVRRD_KEY   0x53474972756c6573ull	/* "SGIrules" */
-
-/* BTE register names */
-#define IIO_BTE_STAT_0          IIO_IBLS_0	/* Also BTE length/status 0 */
-#define IIO_BTE_SRC_0           IIO_IBSA_0	/* Also BTE source address  0 */
-#define IIO_BTE_DEST_0          IIO_IBDA_0	/* Also BTE dest. address 0 */
-#define IIO_BTE_CTRL_0          IIO_IBCT_0	/* Also BTE control/terminate 0 */
-#define IIO_BTE_NOTIFY_0        IIO_IBNA_0	/* Also BTE notification 0 */
-#define IIO_BTE_INT_0           IIO_IBIA_0	/* Also BTE interrupt 0 */
-#define IIO_BTE_OFF_0           0	/* Base offset from BTE 0 regs. */
-#define IIO_BTE_OFF_1   	(IIO_IBLS_1 - IIO_IBLS_0)	/* Offset from base to BTE 1 */
-
-/* BTE register offsets from base */
-#define BTEOFF_STAT             0
-#define BTEOFF_SRC      	(IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
-#define BTEOFF_DEST     	(IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
-#define BTEOFF_CTRL     	(IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
-#define BTEOFF_NOTIFY   	(IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
-#define BTEOFF_INT      	(IIO_BTE_INT_0 - IIO_BTE_STAT_0)
-
-/* names used in shub diags */
-#define IIO_BASE_BTE0   IIO_IBLS_0
-#define IIO_BASE_BTE1   IIO_IBLS_1
-
-/*
- * Macro which takes the widget number, and returns the
- * IO PRB address of that widget.
- * value _x is expected to be a widget number in the range
- * 0, 8 - 0xF
- */
-#define IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
-                	(_x) : \
-                	(_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
-
-/* GFX Flow Control Node/Widget Register */
-#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
-#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
-#define IIO_IGFX_W_NUM_SHIFT	0
-#define IIO_IGFX_PI_NUM_BITS	1	/* size of PI num field */
-#define IIO_IGFX_PI_NUM_MASK	((1<<IIO_IGFX_PI_NUM_BITS)-1)
-#define IIO_IGFX_PI_NUM_SHIFT	4
-#define IIO_IGFX_N_NUM_BITS	8	/* size of node num field */
-#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
-#define IIO_IGFX_N_NUM_SHIFT	5
-#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
-#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
-#define IIO_IGFX_P_NUM_SHIFT	16
-#define IIO_IGFX_INIT(widget, pi, node, cpu)				(\
-	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
-	(((pi)     & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)|	 \
-	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
-	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
-
-/* Scratch registers (all bits available) */
-#define IIO_SCRATCH_REG0        IIO_ISCR0
-#define IIO_SCRATCH_REG1        IIO_ISCR1
-#define IIO_SCRATCH_MASK        0xffffffffffffffffUL
-
-#define IIO_SCRATCH_BIT0_0      0x0000000000000001UL
-#define IIO_SCRATCH_BIT0_1      0x0000000000000002UL
-#define IIO_SCRATCH_BIT0_2      0x0000000000000004UL
-#define IIO_SCRATCH_BIT0_3      0x0000000000000008UL
-#define IIO_SCRATCH_BIT0_4      0x0000000000000010UL
-#define IIO_SCRATCH_BIT0_5      0x0000000000000020UL
-#define IIO_SCRATCH_BIT0_6      0x0000000000000040UL
-#define IIO_SCRATCH_BIT0_7      0x0000000000000080UL
-#define IIO_SCRATCH_BIT0_8      0x0000000000000100UL
-#define IIO_SCRATCH_BIT0_9      0x0000000000000200UL
-#define IIO_SCRATCH_BIT0_A      0x0000000000000400UL
-
-#define IIO_SCRATCH_BIT1_0      0x0000000000000001UL
-#define IIO_SCRATCH_BIT1_1      0x0000000000000002UL
-/* IO Translation Table Entries */
-#define IIO_NUM_ITTES   7	/* ITTEs numbered 0..6 */
-					/* Hw manuals number them 1..7! */
-/*
- * IIO_IMEM Register fields.
- */
-#define IIO_IMEM_W0ESD  0x1UL	/* Widget 0 shut down due to error */
-#define IIO_IMEM_B0ESD	(1UL << 4)	/* BTE 0 shut down due to error */
-#define IIO_IMEM_B1ESD	(1UL << 8)	/* BTE 1 Shut down due to error */
-
-/*
- * As a permanent workaround for a bug in the PI side of the shub, we've
- * redefined big window 7 as small window 0.
- XXX does this still apply for SN1??
- */
-#define HUB_NUM_BIG_WINDOW	(IIO_NUM_ITTES - 1)
-
-/*
- * Use the top big window as a surrogate for the first small window
- */
-#define SWIN0_BIGWIN            HUB_NUM_BIG_WINDOW
-
-#define ILCSR_WARM_RESET        0x100
-
-/*
- * CRB manipulation macros
- *	The CRB macros are slightly complicated, since there are up to
- *	four registers associated with each CRB entry.
- */
-#define IIO_NUM_CRBS            15	/* Number of CRBs */
-#define IIO_NUM_PC_CRBS         4	/* Number of partial cache CRBs */
-#define IIO_ICRB_OFFSET         8
-#define IIO_ICRB_0              IIO_ICRB0_A
-#define IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
-/* XXX - This is now tuneable:
-        #define IIO_FIRST_PC_ENTRY 12
- */
-
-#define IIO_ICRB_A(_x)	((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
-#define IIO_ICRB_B(_x)	((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
-#define IIO_ICRB_C(_x)	((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
-#define IIO_ICRB_D(_x)	((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
-#define IIO_ICRB_E(_x)	((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
-
-#define TNUM_TO_WIDGET_DEV(_tnum)	(_tnum & 0x7)
-
-/*
- * values for "ecode" field
- */
-#define IIO_ICRB_ECODE_DERR     0	/* Directory error due to IIO access */
-#define IIO_ICRB_ECODE_PERR     1	/* Poison error on IO access */
-#define IIO_ICRB_ECODE_WERR     2	/* Write error by IIO access
-					 * e.g. WINV to a Read only line. */
-#define IIO_ICRB_ECODE_AERR     3	/* Access error caused by IIO access */
-#define IIO_ICRB_ECODE_PWERR    4	/* Error on partial write */
-#define IIO_ICRB_ECODE_PRERR    5	/* Error on partial read  */
-#define IIO_ICRB_ECODE_TOUT     6	/* CRB timeout before deallocating */
-#define IIO_ICRB_ECODE_XTERR    7	/* Incoming xtalk pkt had error bit */
-
-/*
- * Values for field imsgtype
- */
-#define IIO_ICRB_IMSGT_XTALK    0	/* Incoming Meessage from Xtalk */
-#define IIO_ICRB_IMSGT_BTE      1	/* Incoming message from BTE    */
-#define IIO_ICRB_IMSGT_SN1NET   2	/* Incoming message from SN1 net */
-#define IIO_ICRB_IMSGT_CRB      3	/* Incoming message from CRB ???  */
-
-/*
- * values for field initiator.
- */
-#define IIO_ICRB_INIT_XTALK     0	/* Message originated in xtalk  */
-#define IIO_ICRB_INIT_BTE0      0x1	/* Message originated in BTE 0  */
-#define IIO_ICRB_INIT_SN1NET    0x2	/* Message originated in SN1net */
-#define IIO_ICRB_INIT_CRB       0x3	/* Message originated in CRB ?  */
-#define IIO_ICRB_INIT_BTE1      0x5	/* MEssage originated in BTE 1  */
-
-/*
- * Number of credits Hub widget has while sending req/response to
- * xbow.
- * Value of 3 is required by Xbow 1.1
- * We may be able to increase this to 4 with Xbow 1.2.
- */
-#define		   HUBII_XBOW_CREDIT       3
-#define		   HUBII_XBOW_REV2_CREDIT  4
-
-/*
- * Number of credits that xtalk devices should use when communicating
- * with a SHub (depth of SHub's queue).
- */
-#define HUB_CREDIT 4
-
-/*
- * Some IIO_PRB fields
- */
-#define IIO_PRB_MULTI_ERR	(1LL << 63)
-#define IIO_PRB_SPUR_RD		(1LL << 51)
-#define IIO_PRB_SPUR_WR		(1LL << 50)
-#define IIO_PRB_RD_TO		(1LL << 49)
-#define IIO_PRB_ERROR		(1LL << 48)
-
-/*************************************************************************
-
- Some of the IIO field masks and shifts are defined here.
- This is in order to maintain compatibility in SN0 and SN1 code
- 
-**************************************************************************/
-
-/*
- * ICMR register fields
- * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
- * present in SHub)
- */
-
-#define IIO_ICMR_CRB_VLD_SHFT   20
-#define IIO_ICMR_CRB_VLD_MASK	(0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
-
-#define IIO_ICMR_FC_CNT_SHFT    16
-#define IIO_ICMR_FC_CNT_MASK	(0xf << IIO_ICMR_FC_CNT_SHFT)
-
-#define IIO_ICMR_C_CNT_SHFT     4
-#define IIO_ICMR_C_CNT_MASK	(0xf << IIO_ICMR_C_CNT_SHFT)
-
-#define IIO_ICMR_PRECISE	(1UL << 52)
-#define IIO_ICMR_CLR_RPPD	(1UL << 13)
-#define IIO_ICMR_CLR_RQPD	(1UL << 12)
-
-/*
- * IIO PIO Deallocation register field masks : (IIO_IPDR)
- XXX present but not needed in bedrock?  See the manual.
- */
-#define IIO_IPDR_PND    	(1 << 4)
-
-/*
- * IIO CRB deallocation register field masks: (IIO_ICDR)
- */
-#define IIO_ICDR_PND    	(1 << 4)
-
-/* 
- * IO BTE Length/Status (IIO_IBLS) register bit field definitions
- */
-#define IBLS_BUSY		(0x1UL << 20)
-#define IBLS_ERROR_SHFT		16
-#define IBLS_ERROR		(0x1UL << IBLS_ERROR_SHFT)
-#define IBLS_LENGTH_MASK	0xffff
-
-/*
- * IO BTE Control/Terminate register (IBCT) register bit field definitions
- */
-#define IBCT_POISON		(0x1UL << 8)
-#define IBCT_NOTIFY		(0x1UL << 4)
-#define IBCT_ZFIL_MODE		(0x1UL << 0)
-
-/*
- * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
- */
-#define IIEPH1_VALID		(1UL << 44)
-#define IIEPH1_OVERRUN		(1UL << 40)
-#define IIEPH1_ERR_TYPE_SHFT	32
-#define IIEPH1_ERR_TYPE_MASK	0xf
-#define IIEPH1_SOURCE_SHFT	20
-#define IIEPH1_SOURCE_MASK	11
-#define IIEPH1_SUPPL_SHFT	8
-#define IIEPH1_SUPPL_MASK	11
-#define IIEPH1_CMD_SHFT		0
-#define IIEPH1_CMD_MASK		7
-
-#define IIEPH2_TAIL		(1UL << 40)
-#define IIEPH2_ADDRESS_SHFT	0
-#define IIEPH2_ADDRESS_MASK	38
-
-#define IIEPH1_ERR_SHORT_REQ	2
-#define IIEPH1_ERR_SHORT_REPLY	3
-#define IIEPH1_ERR_LONG_REQ	4
-#define IIEPH1_ERR_LONG_REPLY	5
-
-/*
- * IO Error Clear register bit field definitions
- */
-#define IECLR_PI1_FWD_INT	(1UL << 31)	/* clear PI1_FORWARD_INT in iidsr */
-#define IECLR_PI0_FWD_INT	(1UL << 30)	/* clear PI0_FORWARD_INT in iidsr */
-#define IECLR_SPUR_RD_HDR	(1UL << 29)	/* clear valid bit in ixss reg */
-#define IECLR_BTE1		(1UL << 18)	/* clear bte error 1 */
-#define IECLR_BTE0		(1UL << 17)	/* clear bte error 0 */
-#define IECLR_CRAZY		(1UL << 16)	/* clear crazy bit in wstat reg */
-#define IECLR_PRB_F		(1UL << 15)	/* clear err bit in PRB_F reg */
-#define IECLR_PRB_E		(1UL << 14)	/* clear err bit in PRB_E reg */
-#define IECLR_PRB_D		(1UL << 13)	/* clear err bit in PRB_D reg */
-#define IECLR_PRB_C		(1UL << 12)	/* clear err bit in PRB_C reg */
-#define IECLR_PRB_B		(1UL << 11)	/* clear err bit in PRB_B reg */
-#define IECLR_PRB_A		(1UL << 10)	/* clear err bit in PRB_A reg */
-#define IECLR_PRB_9		(1UL << 9)	/* clear err bit in PRB_9 reg */
-#define IECLR_PRB_8		(1UL << 8)	/* clear err bit in PRB_8 reg */
-#define IECLR_PRB_0		(1UL << 0)	/* clear err bit in PRB_0 reg */
-
-/*
- * IIO CRB control register Fields: IIO_ICCR 
- */
-#define	IIO_ICCR_PENDING	0x10000
-#define	IIO_ICCR_CMD_MASK	0xFF
-#define	IIO_ICCR_CMD_SHFT	7
-#define	IIO_ICCR_CMD_NOP	0x0	/* No Op */
-#define	IIO_ICCR_CMD_WAKE	0x100	/* Reactivate CRB entry and process */
-#define	IIO_ICCR_CMD_TIMEOUT	0x200	/* Make CRB timeout & mark invalid */
-#define	IIO_ICCR_CMD_EJECT	0x400	/* Contents of entry written to memory
-					 * via a WB
-					 */
-#define	IIO_ICCR_CMD_FLUSH	0x800
-
-/*
- *
- * CRB Register description.
- *
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- *
- * Many of the fields in CRB are status bits used by hardware
- * for implementation of the protocol. It's very dangerous to
- * mess around with the CRB registers.
- *
- * It's OK to read the CRB registers and try to make sense out of the
- * fields in CRB.
- *
- * Updating CRB requires all activities in Hub IIO to be quiesced.
- * otherwise, a write to CRB could corrupt other CRB entries.
- * CRBs are here only as a back door peek to shub IIO's status.
- * Quiescing implies  no dmas no PIOs
- * either directly from the cpu or from sn0net.
- * this is not something that can be done easily. So, AVOID updating
- * CRBs.
- */
-
-/*
- * Easy access macros for CRBs, all 5 registers (A-E)
- */
-typedef ii_icrb0_a_u_t icrba_t;
-#define a_sidn		ii_icrb0_a_fld_s.ia_sidn
-#define a_tnum		ii_icrb0_a_fld_s.ia_tnum
-#define a_addr          ii_icrb0_a_fld_s.ia_addr
-#define a_valid         ii_icrb0_a_fld_s.ia_vld
-#define a_iow           ii_icrb0_a_fld_s.ia_iow
-#define a_regvalue	ii_icrb0_a_regval
-
-typedef ii_icrb0_b_u_t icrbb_t;
-#define b_use_old       ii_icrb0_b_fld_s.ib_use_old
-#define b_imsgtype      ii_icrb0_b_fld_s.ib_imsgtype
-#define b_imsg          ii_icrb0_b_fld_s.ib_imsg
-#define b_initiator     ii_icrb0_b_fld_s.ib_init
-#define b_exc           ii_icrb0_b_fld_s.ib_exc
-#define b_ackcnt        ii_icrb0_b_fld_s.ib_ack_cnt
-#define b_resp          ii_icrb0_b_fld_s.ib_resp
-#define b_ack           ii_icrb0_b_fld_s.ib_ack
-#define b_hold          ii_icrb0_b_fld_s.ib_hold
-#define b_wb            ii_icrb0_b_fld_s.ib_wb
-#define b_intvn         ii_icrb0_b_fld_s.ib_intvn
-#define b_stall_ib      ii_icrb0_b_fld_s.ib_stall_ib
-#define b_stall_int     ii_icrb0_b_fld_s.ib_stall__intr
-#define b_stall_bte_0   ii_icrb0_b_fld_s.ib_stall__bte_0
-#define b_stall_bte_1   ii_icrb0_b_fld_s.ib_stall__bte_1
-#define b_error         ii_icrb0_b_fld_s.ib_error
-#define b_ecode         ii_icrb0_b_fld_s.ib_errcode
-#define b_lnetuce       ii_icrb0_b_fld_s.ib_ln_uce
-#define b_mark          ii_icrb0_b_fld_s.ib_mark
-#define b_xerr          ii_icrb0_b_fld_s.ib_xt_err
-#define b_regvalue	ii_icrb0_b_regval
-
-typedef ii_icrb0_c_u_t icrbc_t;
-#define c_suppl         ii_icrb0_c_fld_s.ic_suppl
-#define c_barrop        ii_icrb0_c_fld_s.ic_bo
-#define c_doresp        ii_icrb0_c_fld_s.ic_resprqd
-#define c_gbr           ii_icrb0_c_fld_s.ic_gbr
-#define c_btenum        ii_icrb0_c_fld_s.ic_bte_num
-#define c_cohtrans      ii_icrb0_c_fld_s.ic_ct
-#define c_xtsize        ii_icrb0_c_fld_s.ic_size
-#define c_source        ii_icrb0_c_fld_s.ic_source
-#define c_regvalue	ii_icrb0_c_regval
-
-typedef ii_icrb0_d_u_t icrbd_t;
-#define d_sleep         ii_icrb0_d_fld_s.id_sleep
-#define d_pricnt        ii_icrb0_d_fld_s.id_pr_cnt
-#define d_pripsc        ii_icrb0_d_fld_s.id_pr_psc
-#define d_bteop         ii_icrb0_d_fld_s.id_bte_op
-#define d_bteaddr       ii_icrb0_d_fld_s.id_pa_be	/* ic_pa_be fld has 2 names */
-#define d_benable       ii_icrb0_d_fld_s.id_pa_be	/* ic_pa_be fld has 2 names */
-#define d_regvalue	ii_icrb0_d_regval
-
-typedef ii_icrb0_e_u_t icrbe_t;
-#define icrbe_ctxtvld   ii_icrb0_e_fld_s.ie_cvld
-#define icrbe_toutvld   ii_icrb0_e_fld_s.ie_tvld
-#define icrbe_context   ii_icrb0_e_fld_s.ie_context
-#define icrbe_timeout   ii_icrb0_e_fld_s.ie_timeout
-#define e_regvalue	ii_icrb0_e_regval
-
-/* Number of widgets supported by shub */
-#define HUB_NUM_WIDGET          9
-#define HUB_WIDGET_ID_MIN       0x8
-#define HUB_WIDGET_ID_MAX       0xf
-
-#define HUB_WIDGET_PART_NUM     0xc120
-#define MAX_HUBS_PER_XBOW       2
-
-/* A few more #defines for backwards compatibility */
-#define iprb_t          ii_iprb0_u_t
-#define iprb_regval     ii_iprb0_regval
-#define iprb_mult_err	ii_iprb0_fld_s.i_mult_err
-#define iprb_spur_rd	ii_iprb0_fld_s.i_spur_rd
-#define iprb_spur_wr	ii_iprb0_fld_s.i_spur_wr
-#define iprb_rd_to	ii_iprb0_fld_s.i_rd_to
-#define iprb_ovflow     ii_iprb0_fld_s.i_of_cnt
-#define iprb_error      ii_iprb0_fld_s.i_error
-#define iprb_ff         ii_iprb0_fld_s.i_f
-#define iprb_mode       ii_iprb0_fld_s.i_m
-#define iprb_bnakctr    ii_iprb0_fld_s.i_nb
-#define iprb_anakctr    ii_iprb0_fld_s.i_na
-#define iprb_xtalkctr   ii_iprb0_fld_s.i_c
-
-#define LNK_STAT_WORKING        0x2		/* LLP is working */
-
-#define IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
-#define IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
-#define IIO_WSTAT_TXRETRY_MASK  0x7F		/* should be 0xFF?? */
-#define IIO_WSTAT_TXRETRY_SHFT  16
-#define IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
-                          		IIO_WSTAT_TXRETRY_MASK)
-
-/* Number of II perf. counters we can multiplex at once */
-
-#define IO_PERF_SETS	32
-
-/* Bit for the widget in inbound access register */
-#define IIO_IIWA_WIDGET(_w)	((u64)(1ULL << _w))
-/* Bit for the widget in outbound access register */
-#define IIO_IOWA_WIDGET(_w)	((u64)(1ULL << _w))
-
-/* NOTE: The following define assumes that we are going to get
- * widget numbers from 8 thru F and the device numbers within
- * widget from 0 thru 7.
- */
-#define IIO_IIDEM_WIDGETDEV_MASK(w, d)	((u64)(1ULL << (8 * ((w) - 8) + (d))))
-
-/* IO Interrupt Destination Register */
-#define IIO_IIDSR_SENT_SHIFT    28
-#define IIO_IIDSR_SENT_MASK     0x30000000
-#define IIO_IIDSR_ENB_SHIFT     24
-#define IIO_IIDSR_ENB_MASK      0x01000000
-#define IIO_IIDSR_NODE_SHIFT    9
-#define IIO_IIDSR_NODE_MASK     0x000ff700
-#define IIO_IIDSR_PI_ID_SHIFT   8
-#define IIO_IIDSR_PI_ID_MASK    0x00000100
-#define IIO_IIDSR_LVL_SHIFT     0
-#define IIO_IIDSR_LVL_MASK      0x000000ff
-
-/* Xtalk timeout threshhold register (IIO_IXTT) */
-#define IXTT_RRSP_TO_SHFT	55	/* read response timeout */
-#define IXTT_RRSP_TO_MASK	(0x1FULL << IXTT_RRSP_TO_SHFT)
-#define IXTT_RRSP_PS_SHFT	32	/* read responsed TO prescalar */
-#define IXTT_RRSP_PS_MASK	(0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
-#define IXTT_TAIL_TO_SHFT	0	/* tail timeout counter threshold */
-#define IXTT_TAIL_TO_MASK	(0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
-
-/*
- * The IO LLP control status register and widget control register
- */
-
-typedef union hubii_wcr_u {
-	u64 wcr_reg_value;
-	struct {
-		u64 wcr_widget_id:4,	/* LLP crossbar credit */
-		 wcr_tag_mode:1,	/* Tag mode */
-		 wcr_rsvd1:8,	/* Reserved */
-		 wcr_xbar_crd:3,	/* LLP crossbar credit */
-		 wcr_f_bad_pkt:1,	/* Force bad llp pkt enable */
-		 wcr_dir_con:1,	/* widget direct connect */
-		 wcr_e_thresh:5,	/* elasticity threshold */
-		 wcr_rsvd:41;	/* unused */
-	} wcr_fields_s;
-} hubii_wcr_t;
-
-#define iwcr_dir_con    wcr_fields_s.wcr_dir_con
-
-/* The structures below are defined to extract and modify the ii
-performance registers */
-
-/* io_perf_sel allows the caller to specify what tests will be
-   performed */
-
-typedef union io_perf_sel {
-	u64 perf_sel_reg;
-	struct {
-		u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48;
-	} perf_sel_bits;
-} io_perf_sel_t;
-
-/* io_perf_cnt is to extract the count from the shub registers. Due to
-   hardware problems there is only one counter, not two. */
-
-typedef union io_perf_cnt {
-	u64 perf_cnt;
-	struct {
-		u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32;
-	} perf_cnt_bits;
-
-} io_perf_cnt_t;
-
-typedef union iprte_a {
-	u64 entry;
-	struct {
-		u64 i_rsvd_1:3;
-		u64 i_addr:38;
-		u64 i_init:3;
-		u64 i_source:8;
-		u64 i_rsvd:2;
-		u64 i_widget:4;
-		u64 i_to_cnt:5;
-		u64 i_vld:1;
-	} iprte_fields;
-} iprte_a_t;
-
-#endif				/* _ASM_IA64_SN_SHUBIO_H */
diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h
deleted file mode 100644
index c2611f6cfe33..000000000000
--- a/include/asm-ia64/sn/simulator.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SIMULATOR_H
-#define _ASM_IA64_SN_SIMULATOR_H
-
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
-#define SNMAGIC 0xaeeeeeee8badbeefL
-#define IS_MEDUSA()			({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
-
-#define SIMULATOR_SLEEP()		asm("nop.i 0x8beef")
-#define IS_RUNNING_ON_SIMULATOR()	(sn_prom_type)
-#define IS_RUNNING_ON_FAKE_PROM()	(sn_prom_type == 2)
-extern int sn_prom_type;		/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
-#else
-#define IS_MEDUSA()			0
-#define SIMULATOR_SLEEP()
-#define IS_RUNNING_ON_SIMULATOR()	0
-#endif
-
-#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h
deleted file mode 100644
index e61ebac38cdd..000000000000
--- a/include/asm-ia64/sn/sn2/sn_hwperf.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
- *
- * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
- * SGI Altix node and router hardware
- *
- * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
- */
-
-#ifndef SN_HWPERF_H
-#define SN_HWPERF_H
-
-/*
- * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
- * return an array of these. Do not change this without also
- * changing the corresponding SAL code.
- */
-#define SN_HWPERF_MAXSTRING		128
-struct sn_hwperf_object_info {
-	u32 id;
-	union {
-		struct {
-			u64 this_part:1;
-			u64 is_shared:1;
-		} fields;
-		struct {
-			u64 flags;
-			u64 reserved;
-		} b;
-	} f;
-	char name[SN_HWPERF_MAXSTRING];
-	char location[SN_HWPERF_MAXSTRING];
-	u32 ports;
-};
-
-#define sn_hwp_this_part	f.fields.this_part
-#define sn_hwp_is_shared	f.fields.is_shared
-#define sn_hwp_flags		f.b.flags
-
-/* macros for object classification */
-#define SN_HWPERF_IS_NODE(x)		((x) && strstr((x)->name, "SHub"))
-#define SN_HWPERF_IS_NODE_SHUB2(x)	((x) && strstr((x)->name, "SHub 2."))
-#define SN_HWPERF_IS_IONODE(x)		((x) && strstr((x)->name, "TIO"))
-#define SN_HWPERF_IS_NL3ROUTER(x)	((x) && strstr((x)->name, "NL3Router"))
-#define SN_HWPERF_IS_NL4ROUTER(x)	((x) && strstr((x)->name, "NL4Router"))
-#define SN_HWPERF_IS_OLDROUTER(x)	((x) && strstr((x)->name, "Router"))
-#define SN_HWPERF_IS_ROUTER(x)		(SN_HWPERF_IS_NL3ROUTER(x) || 		\
-					 	SN_HWPERF_IS_NL4ROUTER(x) || 	\
-					 	SN_HWPERF_IS_OLDROUTER(x))
-#define SN_HWPERF_FOREIGN(x)		((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
-#define SN_HWPERF_SAME_OBJTYPE(x,y)	((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
-					(SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
-					(SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
-
-/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
-struct sn_hwperf_port_info {
-	u32 port;
-	u32 conn_id;
-	u32 conn_port;
-};
-
-/* for HWPERF_{GET,SET}_MMRS */
-struct sn_hwperf_data {
-	u64 addr;
-	u64 data;
-};
-
-/* user ioctl() argument, see below */
-struct sn_hwperf_ioctl_args {
-        u64 arg;		/* argument, usually an object id */
-        u64 sz;                 /* size of transfer */
-        void *ptr;              /* pointer to source/target */
-        u32 v0;			/* second return value */
-};
-
-/*
- * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
- * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
- * to call SAL, and whether to use an interprocessor interrupt
- * or task migration in order to do so. If the CPU specified is
- * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
- */
-#define SN_HWPERF_ARG_ANY_CPU		0x7fffffffUL
-#define SN_HWPERF_ARG_CPU_MASK		0x7fffffff00000000ULL
-#define SN_HWPERF_ARG_USE_IPI_MASK	0x8000000000000000ULL
-#define SN_HWPERF_ARG_OBJID_MASK	0x00000000ffffffffULL
-
-/* 
- * ioctl requests on the "sn_hwperf" misc device that call SAL.
- */
-#define SN_HWPERF_OP_MEM_COPYIN		0x1000
-#define SN_HWPERF_OP_MEM_COPYOUT	0x2000
-#define SN_HWPERF_OP_MASK		0x0fff
-
-/*
- * Determine mem requirement.
- * arg	don't care
- * sz	8
- * p	pointer to u64 integer
- */
-#define	SN_HWPERF_GET_HEAPSIZE		1
-
-/*
- * Install mem for SAL drvr
- * arg	don't care
- * sz	sizeof buffer pointed to by p
- * p	pointer to buffer for scratch area
- */
-#define SN_HWPERF_INSTALL_HEAP		2
-
-/*
- * Determine number of objects
- * arg	don't care
- * sz	8
- * p	pointer to u64 integer
- */
-#define SN_HWPERF_OBJECT_COUNT		(10|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Determine object "distance", relative to a cpu. This operation can
- * execute on a designated logical cpu number, using either an IPI or
- * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
- * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
- *
- * arg	bitmap of IPI flag, cpu number and object id
- * sz	8
- * p	pointer to u64 integer
- */
-#define SN_HWPERF_OBJECT_DISTANCE	(11|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Enumerate objects. Special case if sz == 8, returns the required
- * buffer size.
- * arg	don't care
- * sz	sizeof buffer pointed to by p
- * p	pointer to array of struct sn_hwperf_object_info
- */
-#define SN_HWPERF_ENUM_OBJECTS		(12|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Enumerate NumaLink ports for an object. Special case if sz == 8,
- * returns the required buffer size.
- * arg	object id
- * sz	sizeof buffer pointed to by p
- * p	pointer to array of struct sn_hwperf_port_info
- */
-#define SN_HWPERF_ENUM_PORTS		(13|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * SET/GET memory mapped registers. These operations can execute
- * on a designated logical cpu number, using either an IPI or via
- * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
- * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
- *
- * arg	bitmap of ipi flag, cpu number and object id
- * sz	sizeof buffer pointed to by p
- * p	pointer to array of struct sn_hwperf_data
- */
-#define SN_HWPERF_SET_MMRS		(14|SN_HWPERF_OP_MEM_COPYIN)
-#define SN_HWPERF_GET_MMRS		(15|SN_HWPERF_OP_MEM_COPYOUT| \
-					    SN_HWPERF_OP_MEM_COPYIN)
-/*
- * Lock a shared object
- * arg	object id
- * sz	don't care
- * p	don't care
- */
-#define SN_HWPERF_ACQUIRE		16
-
-/*
- * Unlock a shared object
- * arg	object id
- * sz	don't care
- * p	don't care
- */
-#define SN_HWPERF_RELEASE		17
-
-/*
- * Break a lock on a shared object
- * arg	object id
- * sz	don't care
- * p	don't care
- */
-#define SN_HWPERF_FORCE_RELEASE		18
-
-/*
- * ioctl requests on "sn_hwperf" that do not call SAL
- */
-
-/*
- * get cpu info as an array of hwperf_object_info_t. 
- * id is logical CPU number, name is description, location
- * is geoid (e.g. 001c04#1c). Special case if sz == 8,
- * returns the required buffer size.
- *
- * arg	don't care
- * sz	sizeof buffer pointed to by p
- * p	pointer to array of struct sn_hwperf_object_info
- */
-#define SN_HWPERF_GET_CPU_INFO		(100|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given an object id, return it's node number (aka cnode).
- * arg	object id
- * sz	8
- * p	pointer to u64 integer
- */
-#define SN_HWPERF_GET_OBJ_NODE		(101|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given a node number (cnode), return it's nasid.
- * arg	ordinal node number (aka cnodeid)
- * sz	8
- * p	pointer to u64 integer
- */
-#define SN_HWPERF_GET_NODE_NASID	(102|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given a node id, determine the id of the nearest node with CPUs
- * and the id of the nearest node that has memory. The argument
- * node would normally be a "headless" node, e.g. an "IO node".
- * Return 0 on success.
- */
-extern int sn_hwperf_get_nearest_node(cnodeid_t node,
-	cnodeid_t *near_mem, cnodeid_t *near_cpu);
-
-/* return codes */
-#define SN_HWPERF_OP_OK			0
-#define SN_HWPERF_OP_NOMEM		1
-#define SN_HWPERF_OP_NO_PERM		2
-#define SN_HWPERF_OP_IO_ERROR		3
-#define SN_HWPERF_OP_BUSY		4
-#define SN_HWPERF_OP_RECONFIGURE	253
-#define SN_HWPERF_OP_INVAL		254
-
-int sn_topology_open(struct inode *inode, struct file *file);
-int sn_topology_release(struct inode *inode, struct file *file);
-#endif				/* SN_HWPERF_H */
diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h
deleted file mode 100644
index a676dd9ace3e..000000000000
--- a/include/asm-ia64/sn/sn_cpuid.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* 
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-#ifndef _ASM_IA64_SN_SN_CPUID_H
-#define _ASM_IA64_SN_SN_CPUID_H
-
-#include <linux/smp.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/pda.h>
-#include <asm/intrinsics.h>
-
-
-/*
- * Functions for converting between cpuids, nodeids and NASIDs.
- * 
- * These are for SGI platforms only.
- *
- */
-
-
-
-
-/*
- *  Definitions of terms (these definitions are for IA64 ONLY. Other architectures
- *  use cpuid/cpunum quite defferently):
- *
- *	   CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
- *		the cpu. The value cpuid has no significance on IA64 other than
- *		the boot cpu is 0.
- *			smp_processor_id() returns the cpuid of the current cpu.
- *
- * 	   CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
- *		This is the same as 31:24 of the processor LID register
- *			hard_smp_processor_id()- cpu_physical_id of current processor
- *			cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
- *			cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid> 
- *				* not real efficient - don't use in perf critical code
- *
- *         SLICE - a number in the range of 0 - 3 (typically) that represents the
- *		cpu number on a brick.
- *
- *	   SUBNODE - (almost obsolete) the number of the FSB that a cpu is
- *		connected to. This is also the same as the PI number. Usually 0 or 1.
- *
- *	NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no 
- *	significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
- *
- *
- * The macros convert between cpu physical ids & slice/nasid/cnodeid.
- * These terms are described below:
- *
- *
- * Brick
- *          -----   -----           -----   -----       CPU
- *          | 0 |   | 1 |           | 0 |   | 1 |       SLICE
- *          -----   -----           -----   -----
- *            |       |               |       |
- *            |       |               |       |
- *          0 |       | 2           0 |       | 2       FSB SLOT
- *             -------                 -------  
- *                |                       |
- *                |                       |
- *                |                       |
- *             ------------      -------------
- *             |          |      |           |
- *             |    SHUB  |      |   SHUB    |        NASID   (0..MAX_NASIDS)
- *             |          |----- |           |        CNODEID (0..num_compact_nodes-1)
- *             |          |      |           |
- *             |          |      |           |
- *             ------------      -------------
- *                   |                 |
- *                           
- *
- */
-
-#define get_node_number(addr)			NASID_GET(addr)
-
-/*
- * NOTE: on non-MP systems, only cpuid 0 exists
- */
-
-extern short physical_node_map[];	/* indexed by nasid to get cnode */
-
-/*
- * Macros for retrieving info about current cpu
- */
-#define get_nasid()	(sn_nodepda->phys_cpuid[smp_processor_id()].nasid)
-#define get_subnode()	(sn_nodepda->phys_cpuid[smp_processor_id()].subnode)
-#define get_slice()	(sn_nodepda->phys_cpuid[smp_processor_id()].slice)
-#define get_cnode()	(sn_nodepda->phys_cpuid[smp_processor_id()].cnode)
-#define get_sapicid()	((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
-
-/*
- * Macros for retrieving info about an arbitrary cpu
- *	cpuid - logical cpu id
- */
-#define cpuid_to_nasid(cpuid)		(sn_nodepda->phys_cpuid[cpuid].nasid)
-#define cpuid_to_subnode(cpuid)		(sn_nodepda->phys_cpuid[cpuid].subnode)
-#define cpuid_to_slice(cpuid)		(sn_nodepda->phys_cpuid[cpuid].slice)
-
-
-/*
- * Dont use the following in performance critical code. They require scans
- * of potentially large tables.
- */
-extern int nasid_slice_to_cpuid(int, int);
-
-/*
- * cnodeid_to_nasid - convert a cnodeid to a NASID
- */
-#define cnodeid_to_nasid(cnodeid)	(sn_cnodeid_to_nasid[cnodeid])
- 
-/*
- * nasid_to_cnodeid - convert a NASID to a cnodeid
- */
-#define nasid_to_cnodeid(nasid)		(physical_node_map[nasid])
-
-/*
- * partition_coherence_id - get the coherence ID of the current partition
- */
-extern u8 sn_coherency_id;
-#define partition_coherence_id()	(sn_coherency_id)
-
-#endif /* _ASM_IA64_SN_SN_CPUID_H */
-
diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/include/asm-ia64/sn/sn_feature_sets.h
deleted file mode 100644
index 8e83ac117ace..000000000000
--- a/include/asm-ia64/sn/sn_feature_sets.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _ASM_IA64_SN_FEATURE_SETS_H
-#define _ASM_IA64_SN_FEATURE_SETS_H
-
-/*
- * SN PROM Features
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005-2006 Silicon Graphics, Inc.  All rights reserved.
- */
-
-
-/* --------------------- PROM Features -----------------------------*/
-extern int sn_prom_feature_available(int id);
-
-#define MAX_PROM_FEATURE_SETS			2
-
-/*
- * The following defines features that may or may not be supported by the
- * current PROM. The OS uses sn_prom_feature_available(feature) to test for
- * the presence of a PROM feature. Down rev (old) PROMs will always test
- * "false" for new features.
- *
- * Use:
- * 		if (sn_prom_feature_available(PRF_XXX))
- * 			...
- */
-
-#define PRF_PAL_CACHE_FLUSH_SAFE	0
-#define PRF_DEVICE_FLUSH_LIST		1
-#define PRF_HOTPLUG_SUPPORT		2
-#define PRF_CPU_DISABLE_SUPPORT		3
-
-/* --------------------- OS Features -------------------------------*/
-
-/*
- * The following defines OS features that are optionally present in
- * the operating system.
- * During boot, PROM is notified of these features via a series of calls:
- *
- * 		ia64_sn_set_os_feature(feature1);
- *
- * Once enabled, a feature cannot be disabled.
- *
- * By default, features are disabled unless explicitly enabled.
- *
- * These defines must be kept in sync with the corresponding
- * PROM definitions in feature_sets.h.
- */
-#define  OSF_MCA_SLV_TO_OS_INIT_SLV	0
-#define  OSF_FEAT_LOG_SBES		1
-#define  OSF_ACPI_ENABLE		2
-#define  OSF_PCISEGMENT_ENABLE		3
-
-
-#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
deleted file mode 100644
index 676b31a08c61..000000000000
--- a/include/asm-ia64/sn/sn_sal.h
+++ /dev/null
@@ -1,1188 +0,0 @@
-#ifndef _ASM_IA64_SN_SN_SAL_H
-#define _ASM_IA64_SN_SN_SAL_H
-
-/*
- * System Abstraction Layer definitions for IA64
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All rights reserved.
- */
-
-
-#include <asm/sal.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/shub_mmr.h>
-
-// SGI Specific Calls
-#define  SN_SAL_POD_MODE                           0x02000001
-#define  SN_SAL_SYSTEM_RESET                       0x02000002
-#define  SN_SAL_PROBE                              0x02000003
-#define  SN_SAL_GET_MASTER_NASID                   0x02000004
-#define	 SN_SAL_GET_KLCONFIG_ADDR		   0x02000005
-#define  SN_SAL_LOG_CE				   0x02000006
-#define  SN_SAL_REGISTER_CE			   0x02000007
-#define  SN_SAL_GET_PARTITION_ADDR		   0x02000009
-#define  SN_SAL_XP_ADDR_REGION			   0x0200000f
-#define  SN_SAL_NO_FAULT_ZONE_VIRTUAL		   0x02000010
-#define  SN_SAL_NO_FAULT_ZONE_PHYSICAL		   0x02000011
-#define  SN_SAL_PRINT_ERROR			   0x02000012
-#define  SN_SAL_REGISTER_PMI_HANDLER		   0x02000014
-#define  SN_SAL_SET_ERROR_HANDLING_FEATURES	   0x0200001a	// reentrant
-#define  SN_SAL_GET_FIT_COMPT			   0x0200001b	// reentrant
-#define  SN_SAL_GET_SAPIC_INFO                     0x0200001d
-#define  SN_SAL_GET_SN_INFO                        0x0200001e
-#define  SN_SAL_CONSOLE_PUTC                       0x02000021
-#define  SN_SAL_CONSOLE_GETC                       0x02000022
-#define  SN_SAL_CONSOLE_PUTS                       0x02000023
-#define  SN_SAL_CONSOLE_GETS                       0x02000024
-#define  SN_SAL_CONSOLE_GETS_TIMEOUT               0x02000025
-#define  SN_SAL_CONSOLE_POLL                       0x02000026
-#define  SN_SAL_CONSOLE_INTR                       0x02000027
-#define  SN_SAL_CONSOLE_PUTB			   0x02000028
-#define  SN_SAL_CONSOLE_XMIT_CHARS		   0x0200002a
-#define  SN_SAL_CONSOLE_READC			   0x0200002b
-#define  SN_SAL_SYSCTL_OP			   0x02000030
-#define  SN_SAL_SYSCTL_MODID_GET	           0x02000031
-#define  SN_SAL_SYSCTL_GET                         0x02000032
-#define  SN_SAL_SYSCTL_IOBRICK_MODULE_GET          0x02000033
-#define  SN_SAL_SYSCTL_IO_PORTSPEED_GET            0x02000035
-#define  SN_SAL_SYSCTL_SLAB_GET                    0x02000036
-#define  SN_SAL_BUS_CONFIG		   	   0x02000037
-#define  SN_SAL_SYS_SERIAL_GET			   0x02000038
-#define  SN_SAL_PARTITION_SERIAL_GET		   0x02000039
-#define  SN_SAL_SYSCTL_PARTITION_GET               0x0200003a
-#define  SN_SAL_SYSTEM_POWER_DOWN		   0x0200003b
-#define  SN_SAL_GET_MASTER_BASEIO_NASID		   0x0200003c
-#define  SN_SAL_COHERENCE                          0x0200003d
-#define  SN_SAL_MEMPROTECT                         0x0200003e
-#define  SN_SAL_SYSCTL_FRU_CAPTURE		   0x0200003f
-
-#define  SN_SAL_SYSCTL_IOBRICK_PCI_OP		   0x02000042	// reentrant
-#define	 SN_SAL_IROUTER_OP			   0x02000043
-#define  SN_SAL_SYSCTL_EVENT                       0x02000044
-#define  SN_SAL_IOIF_INTERRUPT			   0x0200004a
-#define  SN_SAL_HWPERF_OP			   0x02000050   // lock
-#define  SN_SAL_IOIF_ERROR_INTERRUPT		   0x02000051
-#define  SN_SAL_IOIF_PCI_SAFE			   0x02000052
-#define  SN_SAL_IOIF_SLOT_ENABLE		   0x02000053
-#define  SN_SAL_IOIF_SLOT_DISABLE		   0x02000054
-#define  SN_SAL_IOIF_GET_HUBDEV_INFO		   0x02000055
-#define  SN_SAL_IOIF_GET_PCIBUS_INFO		   0x02000056
-#define  SN_SAL_IOIF_GET_PCIDEV_INFO		   0x02000057
-#define  SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST	   0x02000058	// deprecated
-#define  SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST	   0x0200005a
-
-#define SN_SAL_IOIF_INIT			   0x0200005f
-#define SN_SAL_HUB_ERROR_INTERRUPT		   0x02000060
-#define SN_SAL_BTE_RECOVER			   0x02000061
-#define SN_SAL_RESERVED_DO_NOT_USE		   0x02000062
-#define SN_SAL_IOIF_GET_PCI_TOPOLOGY		   0x02000064
-
-#define  SN_SAL_GET_PROM_FEATURE_SET		   0x02000065
-#define  SN_SAL_SET_OS_FEATURE_SET		   0x02000066
-#define  SN_SAL_INJECT_ERROR			   0x02000067
-#define  SN_SAL_SET_CPU_NUMBER			   0x02000068
-
-#define  SN_SAL_KERNEL_LAUNCH_EVENT		   0x02000069
-
-/*
- * Service-specific constants
- */
-
-/* Console interrupt manipulation */
-	/* action codes */
-#define SAL_CONSOLE_INTR_OFF    0       /* turn the interrupt off */
-#define SAL_CONSOLE_INTR_ON     1       /* turn the interrupt on */
-#define SAL_CONSOLE_INTR_STATUS 2	/* retrieve the interrupt status */
-	/* interrupt specification & status return codes */
-#define SAL_CONSOLE_INTR_XMIT	1	/* output interrupt */
-#define SAL_CONSOLE_INTR_RECV	2	/* input interrupt */
-
-/* interrupt handling */
-#define SAL_INTR_ALLOC		1
-#define SAL_INTR_FREE		2
-#define SAL_INTR_REDIRECT	3
-
-/*
- * operations available on the generic SN_SAL_SYSCTL_OP
- * runtime service
- */
-#define SAL_SYSCTL_OP_IOBOARD		0x0001  /*  retrieve board type */
-#define SAL_SYSCTL_OP_TIO_JLCK_RST      0x0002  /* issue TIO clock reset */
-
-/*
- * IRouter (i.e. generalized system controller) operations
- */
-#define SAL_IROUTER_OPEN	0	/* open a subchannel */
-#define SAL_IROUTER_CLOSE	1	/* close a subchannel */
-#define SAL_IROUTER_SEND	2	/* send part of an IRouter packet */
-#define SAL_IROUTER_RECV	3	/* receive part of an IRouter packet */
-#define SAL_IROUTER_INTR_STATUS	4	/* check the interrupt status for
-					 * an open subchannel
-					 */
-#define SAL_IROUTER_INTR_ON	5	/* enable an interrupt */
-#define SAL_IROUTER_INTR_OFF	6	/* disable an interrupt */
-#define SAL_IROUTER_INIT	7	/* initialize IRouter driver */
-
-/* IRouter interrupt mask bits */
-#define SAL_IROUTER_INTR_XMIT	SAL_CONSOLE_INTR_XMIT
-#define SAL_IROUTER_INTR_RECV	SAL_CONSOLE_INTR_RECV
-
-/*
- * Error Handling Features
- */
-#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV	0x1	// obsolete
-#define SAL_ERR_FEAT_LOG_SBES			0x2	// obsolete
-#define SAL_ERR_FEAT_MFR_OVERRIDE		0x4
-#define SAL_ERR_FEAT_SBE_THRESHOLD		0xffff0000
-
-/*
- * SAL Error Codes
- */
-#define SALRET_MORE_PASSES	1
-#define SALRET_OK		0
-#define SALRET_NOT_IMPLEMENTED	(-1)
-#define SALRET_INVALID_ARG	(-2)
-#define SALRET_ERROR		(-3)
-
-#define SN_SAL_FAKE_PROM			   0x02009999
-
-/**
-  * sn_sal_revision - get the SGI SAL revision number
-  *
-  * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor).
-  * This routine simply extracts the major and minor values and
-  * presents them in a u32 format.
-  *
-  * For example, version 4.05 would be represented at 0x0405.
-  */
-static inline u32
-sn_sal_rev(void)
-{
-	struct ia64_sal_systab *systab = __va(efi.sal_systab);
-
-	return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor);
-}
-
-/*
- * Returns the master console nasid, if the call fails, return an illegal
- * value.
- */
-static inline u64
-ia64_sn_get_console_nasid(void)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
-
-	if (ret_stuff.status < 0)
-		return ret_stuff.status;
-
-	/* Master console nasid is in 'v0' */
-	return ret_stuff.v0;
-}
-
-/*
- * Returns the master baseio nasid, if the call fails, return an illegal
- * value.
- */
-static inline u64
-ia64_sn_get_master_baseio_nasid(void)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
-
-	if (ret_stuff.status < 0)
-		return ret_stuff.status;
-
-	/* Master baseio nasid is in 'v0' */
-	return ret_stuff.v0;
-}
-
-static inline void *
-ia64_sn_get_klconfig_addr(nasid_t nasid)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
-	return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
-}
-
-/*
- * Returns the next console character.
- */
-static inline u64
-ia64_sn_console_getc(int *ch)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
-
-	/* character is in 'v0' */
-	*ch = (int)ret_stuff.v0;
-
-	return ret_stuff.status;
-}
-
-/*
- * Read a character from the SAL console device, after a previous interrupt
- * or poll operation has given us to know that a character is available
- * to be read.
- */
-static inline u64
-ia64_sn_console_readc(void)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
-
-	/* character is in 'v0' */
-	return ret_stuff.v0;
-}
-
-/*
- * Sends the given character to the console.
- */
-static inline u64
-ia64_sn_console_putc(char ch)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0);
-
-	return ret_stuff.status;
-}
-
-/*
- * Sends the given buffer to the console.
- */
-static inline u64
-ia64_sn_console_putb(const char *buf, int len)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0; 
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0);
-
-	if ( ret_stuff.status == 0 ) {
-		return ret_stuff.v0;
-	}
-	return (u64)0;
-}
-
-/*
- * Print a platform error record
- */
-static inline u64
-ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0);
-
-	return ret_stuff.status;
-}
-
-/*
- * Check for Platform errors
- */
-static inline u64
-ia64_sn_plat_cpei_handler(void)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
-
-	return ret_stuff.status;
-}
-
-/*
- * Set Error Handling Features	(Obsolete)
- */
-static inline u64
-ia64_sn_plat_set_error_handling_features(void)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
-		SAL_ERR_FEAT_LOG_SBES,
-		0, 0, 0, 0, 0, 0);
-
-	return ret_stuff.status;
-}
-
-/*
- * Checks for console input.
- */
-static inline u64
-ia64_sn_console_check(int *result)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
-
-	/* result is in 'v0' */
-	*result = (int)ret_stuff.v0;
-
-	return ret_stuff.status;
-}
-
-/*
- * Checks console interrupt status
- */
-static inline u64
-ia64_sn_console_intr_status(void)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
-		 0, SAL_CONSOLE_INTR_STATUS,
-		 0, 0, 0, 0, 0);
-
-	if (ret_stuff.status == 0) {
-	    return ret_stuff.v0;
-	}
-	
-	return 0;
-}
-
-/*
- * Enable an interrupt on the SAL console device.
- */
-static inline void
-ia64_sn_console_intr_enable(u64 intr)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
-		 intr, SAL_CONSOLE_INTR_ON,
-		 0, 0, 0, 0, 0);
-}
-
-/*
- * Disable an interrupt on the SAL console device.
- */
-static inline void
-ia64_sn_console_intr_disable(u64 intr)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
-		 intr, SAL_CONSOLE_INTR_OFF,
-		 0, 0, 0, 0, 0);
-}
-
-/*
- * Sends a character buffer to the console asynchronously.
- */
-static inline u64
-ia64_sn_console_xmit_chars(char *buf, int len)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
-		 (u64)buf, (u64)len,
-		 0, 0, 0, 0, 0);
-
-	if (ret_stuff.status == 0) {
-	    return ret_stuff.v0;
-	}
-
-	return 0;
-}
-
-/*
- * Returns the iobrick module Id
- */
-static inline u64
-ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
-
-	/* result is in 'v0' */
-	*result = (int)ret_stuff.v0;
-
-	return ret_stuff.status;
-}
-
-/**
- * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
- *
- * SN_SAL_POD_MODE actually takes an argument, but it's always
- * 0 when we call it from the kernel, so we don't have to expose
- * it to the caller.
- */
-static inline u64
-ia64_sn_pod_mode(void)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
-	if (isrv.status)
-		return 0;
-	return isrv.v0;
-}
-
-/**
- * ia64_sn_probe_mem - read from memory safely
- * @addr: address to probe
- * @size: number bytes to read (1,2,4,8)
- * @data_ptr: address to store value read by probe (-1 returned if probe fails)
- *
- * Call into the SAL to do a memory read.  If the read generates a machine
- * check, this routine will recover gracefully and return -1 to the caller.
- * @addr is usually a kernel virtual address in uncached space (i.e. the
- * address starts with 0xc), but if called in physical mode, @addr should
- * be a physical address.
- *
- * Return values:
- *  0 - probe successful
- *  1 - probe failed (generated MCA)
- *  2 - Bad arg
- * <0 - PAL error
- */
-static inline u64
-ia64_sn_probe_mem(long addr, long size, void *data_ptr)
-{
-	struct ia64_sal_retval isrv;
-
-	SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
-
-	if (data_ptr) {
-		switch (size) {
-		case 1:
-			*((u8*)data_ptr) = (u8)isrv.v0;
-			break;
-		case 2:
-			*((u16*)data_ptr) = (u16)isrv.v0;
-			break;
-		case 4:
-			*((u32*)data_ptr) = (u32)isrv.v0;
-			break;
-		case 8:
-			*((u64*)data_ptr) = (u64)isrv.v0;
-			break;
-		default:
-			isrv.status = 2;
-		}
-	}
-	return isrv.status;
-}
-
-/*
- * Retrieve the system serial number as an ASCII string.
- */
-static inline u64
-ia64_sn_sys_serial_get(char *buf)
-{
-	struct ia64_sal_retval ret_stuff;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
-	return ret_stuff.status;
-}
-
-extern char sn_system_serial_number_string[];
-extern u64 sn_partition_serial_number;
-
-static inline char *
-sn_system_serial_number(void) {
-	if (sn_system_serial_number_string[0]) {
-		return(sn_system_serial_number_string);
-	} else {
-		ia64_sn_sys_serial_get(sn_system_serial_number_string);
-		return(sn_system_serial_number_string);
-	}
-}
-	
-
-/*
- * Returns a unique id number for this system and partition (suitable for
- * use with license managers), based in part on the system serial number.
- */
-static inline u64
-ia64_sn_partition_serial_get(void)
-{
-	struct ia64_sal_retval ret_stuff;
-	ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0,
-				   0, 0, 0, 0, 0, 0);
-	if (ret_stuff.status != 0)
-	    return 0;
-	return ret_stuff.v0;
-}
-
-static inline u64
-sn_partition_serial_number_val(void) {
-	if (unlikely(sn_partition_serial_number == 0)) {
-		sn_partition_serial_number = ia64_sn_partition_serial_get();
-	}
-	return sn_partition_serial_number;
-}
-
-/*
- * Returns the partition id of the nasid passed in as an argument,
- * or INVALID_PARTID if the partition id cannot be retrieved.
- */
-static inline partid_t
-ia64_sn_sysctl_partition_get(nasid_t nasid)
-{
-	struct ia64_sal_retval ret_stuff;
-	SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
-		0, 0, 0, 0, 0, 0);
-	if (ret_stuff.status != 0)
-	    return -1;
-	return ((partid_t)ret_stuff.v0);
-}
-
-/*
- * Returns the physical address of the partition's reserved page through
- * an iterative number of calls.
- *
- * On first call, 'cookie' and 'len' should be set to 0, and 'addr'
- * set to the nasid of the partition whose reserved page's address is
- * being sought.
- * On subsequent calls, pass the values, that were passed back on the
- * previous call.
- *
- * While the return status equals SALRET_MORE_PASSES, keep calling
- * this function after first copying 'len' bytes starting at 'addr'
- * into 'buf'. Once the return status equals SALRET_OK, 'addr' will
- * be the physical address of the partition's reserved page. If the
- * return status equals neither of these, an error as occurred.
- */
-static inline s64
-sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)
-{
-	struct ia64_sal_retval rv;
-	ia64_sal_oemcall_reentrant(&rv, SN_SAL_GET_PARTITION_ADDR, *cookie,
-				   *addr, buf, *len, 0, 0, 0);
-	*cookie = rv.v0;
-	*addr = rv.v1;
-	*len = rv.v2;
-	return rv.status;
-}
-
-/*
- * Register or unregister a physical address range being referenced across
- * a partition boundary for which certain SAL errors should be scanned for,
- * cleaned up and ignored.  This is of value for kernel partitioning code only.
- * Values for the operation argument:
- *	1 = register this address range with SAL
- *	0 = unregister this address range with SAL
- * 
- * SAL maintains a reference count on an address range in case it is registered
- * multiple times.
- * 
- * On success, returns the reference count of the address range after the SAL
- * call has performed the current registration/unregistration.  Returns a
- * negative value if an error occurred.
- */
-static inline int
-sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
-{
-	struct ia64_sal_retval ret_stuff;
-	ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len,
-			 (u64)operation, 0, 0, 0, 0);
-	return ret_stuff.status;
-}
-
-/*
- * Register or unregister an instruction range for which SAL errors should
- * be ignored.  If an error occurs while in the registered range, SAL jumps
- * to return_addr after ignoring the error.  Values for the operation argument:
- *	1 = register this instruction range with SAL
- *	0 = unregister this instruction range with SAL
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
-			 int virtual, int operation)
-{
-	struct ia64_sal_retval ret_stuff;
-	u64 call;
-	if (virtual) {
-		call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
-	} else {
-		call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
-	}
-	ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr,
-			 (u64)1, 0, 0, 0);
-	return ret_stuff.status;
-}
-
-/*
- * Register or unregister a function to handle a PMI received by a CPU.
- * Before calling the registered handler, SAL sets r1 to the value that
- * was passed in as the global_pointer.
- *
- * If the handler pointer is NULL, then the currently registered handler
- * will be unregistered.
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_register_pmi_handler(u64 handler, u64 global_pointer)
-{
-	struct ia64_sal_retval ret_stuff;
-	ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler,
-			 global_pointer, 0, 0, 0, 0, 0);
-	return ret_stuff.status;
-}
-
-/*
- * Change or query the coherence domain for this partition. Each cpu-based
- * nasid is represented by a bit in an array of 64-bit words:
- *      0 = not in this partition's coherency domain
- *      1 = in this partition's coherency domain
- *
- * It is not possible for the local system's nasids to be removed from
- * the coherency domain.  Purpose of the domain arguments:
- *      new_domain = set the coherence domain to the given nasids
- *      old_domain = return the current coherence domain
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_change_coherence(u64 *new_domain, u64 *old_domain)
-{
-	struct ia64_sal_retval ret_stuff;
-	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain,
-				(u64)old_domain, 0, 0, 0, 0, 0);
-	return ret_stuff.status;
-}
-
-/*
- * Change memory access protections for a physical address range.
- * nasid_array is not used on Altix, but may be in future architectures.
- * Available memory protection access classes are defined after the function.
- */
-static inline int
-sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
-				(u64)nasid_array, perms, 0, 0, 0);
-	return ret_stuff.status;
-}
-#define SN_MEMPROT_ACCESS_CLASS_0		0x14a080
-#define SN_MEMPROT_ACCESS_CLASS_1		0x2520c2
-#define SN_MEMPROT_ACCESS_CLASS_2		0x14a1ca
-#define SN_MEMPROT_ACCESS_CLASS_3		0x14a290
-#define SN_MEMPROT_ACCESS_CLASS_6		0x084080
-#define SN_MEMPROT_ACCESS_CLASS_7		0x021080
-
-/*
- * Turns off system power.
- */
-static inline void
-ia64_sn_power_down(void)
-{
-	struct ia64_sal_retval ret_stuff;
-	SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
-	while(1)
-		cpu_relax();
-	/* never returns */
-}
-
-/**
- * ia64_sn_fru_capture - tell the system controller to capture hw state
- *
- * This routine will call the SAL which will tell the system controller(s)
- * to capture hw mmr information from each SHub in the system.
- */
-static inline u64
-ia64_sn_fru_capture(void)
-{
-        struct ia64_sal_retval isrv;
-        SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
-        if (isrv.status)
-                return 0;
-        return isrv.v0;
-}
-
-/*
- * Performs an operation on a PCI bus or slot -- power up, power down
- * or reset.
- */
-static inline u64
-ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, 
-			      u64 bus, char slot, 
-			      u64 action)
-{
-	struct ia64_sal_retval rv = {0, 0, 0, 0};
-
-	SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
-		 bus, (u64) slot, 0, 0);
-	if (rv.status)
-	    	return rv.v0;
-	return 0;
-}
-
-
-/*
- * Open a subchannel for sending arbitrary data to the system
- * controller network via the system controller device associated with
- * 'nasid'.  Return the subchannel number or a negative error code.
- */
-static inline int
-ia64_sn_irtr_open(nasid_t nasid)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
-			   0, 0, 0, 0, 0);
-	return (int) rv.v0;
-}
-
-/*
- * Close system controller subchannel 'subch' previously opened on 'nasid'.
- */
-static inline int
-ia64_sn_irtr_close(nasid_t nasid, int subch)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
-			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
-	return (int) rv.status;
-}
-
-/*
- * Read data from system controller associated with 'nasid' on
- * subchannel 'subch'.  The buffer to be filled is pointed to by
- * 'buf', and its capacity is in the integer pointed to by 'len'.  The
- * referent of 'len' is set to the number of bytes read by the SAL
- * call.  The return value is either SALRET_OK (for bytes read) or
- * SALRET_ERROR (for error or "no data available").
- */
-static inline int
-ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
-			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
-			   0, 0);
-	return (int) rv.status;
-}
-
-/*
- * Write data to the system controller network via the system
- * controller associated with 'nasid' on suchannel 'subch'.  The
- * buffer to be written out is pointed to by 'buf', and 'len' is the
- * number of bytes to be written.  The return value is either the
- * number of bytes written (which could be zero) or a negative error
- * code.
- */
-static inline int
-ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
-			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
-			   0, 0);
-	return (int) rv.v0;
-}
-
-/*
- * Check whether any interrupts are pending for the system controller
- * associated with 'nasid' and its subchannel 'subch'.  The return
- * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
- * SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr(nasid_t nasid, int subch)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
-			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
-	return (int) rv.v0;
-}
-
-/*
- * Enable the interrupt indicated by the intr parameter (either
- * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
-			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
-	return (int) rv.v0;
-}
-
-/*
- * Disable the interrupt indicated by the intr parameter (either
- * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
-			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
-	return (int) rv.v0;
-}
-
-/*
- * Set up a node as the point of contact for system controller
- * environmental event delivery.
- */
-static inline int
-ia64_sn_sysctl_event_init(nasid_t nasid)
-{
-        struct ia64_sal_retval rv;
-        SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid,
-			   0, 0, 0, 0, 0, 0);
-        return (int) rv.v0;
-}
-
-/*
- * Ask the system controller on the specified nasid to reset
- * the CX corelet clock.  Only valid on TIO nodes.
- */
-static inline int
-ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
-			nasid, 0, 0, 0, 0, 0);
-	if (rv.status != 0)
-		return (int)rv.status;
-	if (rv.v0 != 0)
-		return (int)rv.v0;
-
-	return 0;
-}
-
-/*
- * Get the associated ioboard type for a given nasid.
- */
-static inline s64
-ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
-{
-	struct ia64_sal_retval isrv;
-	SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
-			   nasid, 0, 0, 0, 0, 0);
-	if (isrv.v0 != 0) {
-		*ioboard = isrv.v0;
-		return isrv.status;
-	}
-	if (isrv.v1 != 0) {
-		*ioboard = isrv.v1;
-		return isrv.status;
-	}
-
-	return isrv.status;
-}
-
-/**
- * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
- * @nasid: NASID of node to read
- * @index: FIT entry index to be retrieved (0..n)
- * @fitentry: 16 byte buffer where FIT entry will be stored.
- * @banbuf: optional buffer for retrieving banner
- * @banlen: length of banner buffer
- *
- * Access to the physical PROM chips needs to be serialized since reads and
- * writes can't occur at the same time, so we need to call into the SAL when
- * we want to look at the FIT entries on the chips.
- *
- * Returns:
- *	%SALRET_OK if ok
- *	%SALRET_INVALID_ARG if index too big
- *	%SALRET_NOT_IMPLEMENTED if running on older PROM
- *	??? if nasid invalid OR banner buffer not large enough
- */
-static inline int
-ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
-		      u64 banlen)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
-			banbuf, banlen, 0, 0);
-	return (int) rv.status;
-}
-
-/*
- * Initialize the SAL components of the system controller
- * communication driver; specifically pass in a sizable buffer that
- * can be used for allocation of subchannel queues as new subchannels
- * are opened.  "buf" points to the buffer, and "len" specifies its
- * length.
- */
-static inline int
-ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
-			   (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
-	return (int) rv.status;
-}
-
-/*
- * Returns the nasid, subnode & slice corresponding to a SAPIC ID
- *
- *  In:
- *	arg0 - SN_SAL_GET_SAPIC_INFO
- *	arg1 - sapicid (lid >> 16) 
- *  Out:
- *	v0 - nasid
- *	v1 - subnode
- *	v2 - slice
- */
-static inline u64
-ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
-
-/***** BEGIN HACK - temp til old proms no longer supported ********/
-	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
-		if (nasid) *nasid = sapicid & 0xfff;
-		if (subnode) *subnode = (sapicid >> 13) & 1;
-		if (slice) *slice = (sapicid >> 12) & 3;
-		return 0;
-	}
-/***** END HACK *******/
-
-	if (ret_stuff.status < 0)
-		return ret_stuff.status;
-
-	if (nasid) *nasid = (int) ret_stuff.v0;
-	if (subnode) *subnode = (int) ret_stuff.v1;
-	if (slice) *slice = (int) ret_stuff.v2;
-	return 0;
-}
- 
-/*
- * Returns information about the HUB/SHUB.
- *  In:
- *	arg0 - SN_SAL_GET_SN_INFO
- * 	arg1 - 0 (other values reserved for future use)
- *  Out:
- *	v0 
- *		[7:0]   - shub type (0=shub1, 1=shub2)
- *		[15:8]  - Log2 max number of nodes in entire system (includes
- *			  C-bricks, I-bricks, etc)
- *		[23:16] - Log2 of nodes per sharing domain			 
- * 		[31:24] - partition ID
- * 		[39:32] - coherency_id
- * 		[47:40] - regionsize
- *	v1 
- *		[15:0]  - nasid mask (ex., 0x7ff for 11 bit nasid)
- *	 	[23:15] - bit position of low nasid bit
- */
-static inline u64
-ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, 
-		u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ret_stuff.status = 0;
-	ret_stuff.v0 = 0;
-	ret_stuff.v1 = 0;
-	ret_stuff.v2 = 0;
-	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
-
-/***** BEGIN HACK - temp til old proms no longer supported ********/
-	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
-		int nasid = get_sapicid() & 0xfff;
-#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
-#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
-		if (shubtype) *shubtype = 0;
-		if (nasid_bitmask) *nasid_bitmask = 0x7ff;
-		if (nasid_shift) *nasid_shift = 38;
-		if (systemsize) *systemsize = 10;
-		if (sharing_domain_size) *sharing_domain_size = 8;
-		if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
-		if (coher) *coher = nasid >> 9;
-		if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
-			SH_SHUB_ID_NODES_PER_BIT_SHFT;
-		return 0;
-	}
-/***** END HACK *******/
-
-	if (ret_stuff.status < 0)
-		return ret_stuff.status;
-
-	if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
-	if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
-	if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
-	if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
-	if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
-	if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
-	if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
-	if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
-	return 0;
-}
- 
-/*
- * This is the access point to the Altix PROM hardware performance
- * and status monitoring interface. For info on using this, see
- * include/asm-ia64/sn/sn2/sn_hwperf.h
- */
-static inline int
-ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
-                  u64 a3, u64 a4, int *v0)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
-		opcode, a0, a1, a2, a3, a4);
-	if (v0)
-		*v0 = (int) rv.v0;
-	return (int) rv.status;
-}
-
-static inline int
-ia64_sn_ioif_get_pci_topology(u64 buf, u64 len)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0);
-	return (int) rv.status;
-}
-
-/*
- * BTE error recovery is implemented in SAL
- */
-static inline int
-ia64_sn_bte_recovery(nasid_t nasid)
-{
-	struct ia64_sal_retval rv;
-
-	rv.status = 0;
-	SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
-	if (rv.status == SALRET_NOT_IMPLEMENTED)
-		return 0;
-	return (int) rv.status;
-}
-
-static inline int
-ia64_sn_is_fake_prom(void)
-{
-	struct ia64_sal_retval rv;
-	SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
-	return (rv.status == 0);
-}
-
-static inline int
-ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set)
-{
-	struct ia64_sal_retval rv;
-
-	SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0);
-	if (rv.status != 0)
-		return rv.status;
-	*feature_set = rv.v0;
-	return 0;
-}
-
-static inline int
-ia64_sn_set_os_feature(int feature)
-{
-	struct ia64_sal_retval rv;
-
-	SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0);
-	return rv.status;
-}
-
-static inline int
-sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
-{
-	struct ia64_sal_retval ret_stuff;
-
-	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
-				(u64)ecc, 0, 0, 0, 0);
-	return ret_stuff.status;
-}
-
-static inline int
-ia64_sn_set_cpu_number(int cpu)
-{
-	struct ia64_sal_retval rv;
-
-	SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0);
-	return rv.status;
-}
-static inline int
-ia64_sn_kernel_launch_event(void)
-{
- 	struct ia64_sal_retval rv;
-	SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
-	return rv.status;
-}
-#endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/include/asm-ia64/sn/tioca.h b/include/asm-ia64/sn/tioca.h
deleted file mode 100644
index 666222d7f0f6..000000000000
--- a/include/asm-ia64/sn/tioca.h
+++ /dev/null
@@ -1,596 +0,0 @@
-#ifndef _ASM_IA64_SN_TIO_TIOCA_H
-#define _ASM_IA64_SN_TIO_TIOCA_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-#define TIOCA_PART_NUM	0xE020
-#define TIOCA_MFGR_NUM	0x24
-#define TIOCA_REV_A	0x1
-
-/*
- * Register layout for TIO:CA.  See below for bitmasks for each register.
- */
-
-struct tioca {
-	u64	ca_id;				/* 0x000000 */
-	u64	ca_control1;			/* 0x000008 */
-	u64	ca_control2;			/* 0x000010 */
-	u64	ca_status1;			/* 0x000018 */
-	u64	ca_status2;			/* 0x000020 */
-	u64	ca_gart_aperature;		/* 0x000028 */
-	u64	ca_gfx_detach;			/* 0x000030 */
-	u64	ca_inta_dest_addr;		/* 0x000038 */
-	u64	ca_intb_dest_addr;		/* 0x000040 */
-	u64	ca_err_int_dest_addr;		/* 0x000048 */
-	u64	ca_int_status;			/* 0x000050 */
-	u64	ca_int_status_alias;		/* 0x000058 */
-	u64	ca_mult_error;			/* 0x000060 */
-	u64	ca_mult_error_alias;		/* 0x000068 */
-	u64	ca_first_error;			/* 0x000070 */
-	u64	ca_int_mask;			/* 0x000078 */
-	u64	ca_crm_pkterr_type;		/* 0x000080 */
-	u64	ca_crm_pkterr_type_alias;	/* 0x000088 */
-	u64	ca_crm_ct_error_detail_1;	/* 0x000090 */
-	u64	ca_crm_ct_error_detail_2;	/* 0x000098 */
-	u64	ca_crm_tnumto;			/* 0x0000A0 */
-	u64	ca_gart_err;			/* 0x0000A8 */
-	u64	ca_pcierr_type;			/* 0x0000B0 */
-	u64	ca_pcierr_addr;			/* 0x0000B8 */
-
-	u64	ca_pad_0000C0[3];		/* 0x0000{C0..D0} */
-
-	u64	ca_pci_rd_buf_flush;		/* 0x0000D8 */
-	u64	ca_pci_dma_addr_extn;		/* 0x0000E0 */
-	u64	ca_agp_dma_addr_extn;		/* 0x0000E8 */
-	u64	ca_force_inta;			/* 0x0000F0 */
-	u64	ca_force_intb;			/* 0x0000F8 */
-	u64	ca_debug_vector_sel;		/* 0x000100 */
-	u64	ca_debug_mux_core_sel;		/* 0x000108 */
-	u64	ca_debug_mux_pci_sel;		/* 0x000110 */
-	u64	ca_debug_domain_sel;		/* 0x000118 */
-
-	u64	ca_pad_000120[28];		/* 0x0001{20..F8} */
-
-	u64	ca_gart_ptr_table;		/* 0x200 */
-	u64	ca_gart_tlb_addr[8];		/* 0x2{08..40} */
-};
-
-/*
- * Mask/shift definitions for TIO:CA registers.  The convention here is
- * to mainly use the names as they appear in the "TIO AEGIS Programmers'
- * Reference" with a CA_ prefix added.  Some exceptions were made to fix
- * duplicate field names or to generalize fields that are common to
- * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for
- * example).
- *
- * Fields consisting of a single bit have a single #define have a single
- * macro declaration to mask the bit.  Fields consisting of multiple bits
- * have two declarations: one to mask the proper bits in a register, and 
- * a second with the suffix "_SHFT" to identify how far the mask needs to
- * be shifted right to get its base value.
- */
-
-/* ==== ca_control1 */
-#define CA_SYS_BIG_END			(1ull << 0)
-#define CA_DMA_AGP_SWAP			(1ull << 1)
-#define CA_DMA_PCI_SWAP			(1ull << 2)
-#define CA_PIO_IO_SWAP			(1ull << 3)
-#define CA_PIO_MEM_SWAP			(1ull << 4)
-#define CA_GFX_WR_SWAP			(1ull << 5)
-#define CA_AGP_FW_ENABLE		(1ull << 6)
-#define CA_AGP_CAL_CYCLE		(0x7ull << 7)
-#define CA_AGP_CAL_CYCLE_SHFT		7
-#define CA_AGP_CAL_PRSCL_BYP		(1ull << 10)
-#define CA_AGP_INIT_CAL_ENB		(1ull << 11)
-#define CA_INJ_ADDR_PERR		(1ull << 12)
-#define CA_INJ_DATA_PERR		(1ull << 13)
-	/* bits 15:14 unused */
-#define CA_PCIM_IO_NBE_AD		(0x7ull << 16)
-#define CA_PCIM_IO_NBE_AD_SHFT		16
-#define CA_PCIM_FAST_BTB_ENB		(1ull << 19)
-	/* bits 23:20 unused */
-#define CA_PIO_ADDR_OFFSET		(0xffull << 24)
-#define CA_PIO_ADDR_OFFSET_SHFT		24
-	/* bits 35:32 unused */
-#define CA_AGPDMA_OP_COMBDELAY		(0x1full << 36)
-#define CA_AGPDMA_OP_COMBDELAY_SHFT	36
-	/* bit 41 unused */
-#define CA_AGPDMA_OP_ENB_COMBDELAY	(1ull << 42)
-#define	CA_PCI_INT_LPCNT		(0xffull << 44)
-#define CA_PCI_INT_LPCNT_SHFT		44
-	/* bits 63:52 unused */
-
-/* ==== ca_control2 */
-#define CA_AGP_LATENCY_TO		(0xffull << 0)
-#define CA_AGP_LATENCY_TO_SHFT		0
-#define CA_PCI_LATENCY_TO		(0xffull << 8)
-#define CA_PCI_LATENCY_TO_SHFT		8
-#define CA_PCI_MAX_RETRY		(0x3ffull << 16)
-#define CA_PCI_MAX_RETRY_SHFT		16
-	/* bits 27:26 unused */
-#define CA_RT_INT_EN			(0x3ull << 28)
-#define CA_RT_INT_EN_SHFT			28
-#define CA_MSI_INT_ENB			(1ull << 30)
-#define CA_PCI_ARB_ERR_ENB		(1ull << 31)
-#define CA_GART_MEM_PARAM		(0x3ull << 32)
-#define CA_GART_MEM_PARAM_SHFT		32
-#define CA_GART_RD_PREFETCH_ENB		(1ull << 34)
-#define CA_GART_WR_PREFETCH_ENB		(1ull << 35)
-#define CA_GART_FLUSH_TLB		(1ull << 36)
-	/* bits 39:37 unused */
-#define CA_CRM_TNUMTO_PERIOD		(0x1fffull << 40)
-#define CA_CRM_TNUMTO_PERIOD_SHFT	40
-	/* bits 55:53 unused */
-#define CA_CRM_TNUMTO_ENB		(1ull << 56)
-#define CA_CRM_PRESCALER_BYP		(1ull << 57)
-	/* bits 59:58 unused */
-#define CA_CRM_MAX_CREDIT		(0x7ull << 60)
-#define CA_CRM_MAX_CREDIT_SHFT		60
-	/* bit 63 unused */
-
-/* ==== ca_status1 */
-#define CA_CORELET_ID			(0x3ull << 0)
-#define CA_CORELET_ID_SHFT		0
-#define CA_INTA_N			(1ull << 2)
-#define CA_INTB_N			(1ull << 3)
-#define CA_CRM_CREDIT_AVAIL		(0x7ull << 4)
-#define CA_CRM_CREDIT_AVAIL_SHFT	4
-	/* bit 7 unused */
-#define CA_CRM_SPACE_AVAIL		(0x7full << 8)
-#define CA_CRM_SPACE_AVAIL_SHFT		8
-	/* bit 15 unused */
-#define CA_GART_TLB_VAL			(0xffull << 16)
-#define CA_GART_TLB_VAL_SHFT		16
-	/* bits 63:24 unused */
-
-/* ==== ca_status2 */
-#define CA_GFX_CREDIT_AVAIL		(0xffull << 0)
-#define CA_GFX_CREDIT_AVAIL_SHFT	0
-#define CA_GFX_OPQ_AVAIL		(0xffull << 8)
-#define CA_GFX_OPQ_AVAIL_SHFT		8
-#define CA_GFX_WRBUFF_AVAIL		(0xffull << 16)
-#define CA_GFX_WRBUFF_AVAIL_SHFT	16
-#define CA_ADMA_OPQ_AVAIL		(0xffull << 24)
-#define CA_ADMA_OPQ_AVAIL_SHFT		24
-#define CA_ADMA_WRBUFF_AVAIL		(0xffull << 32)
-#define CA_ADMA_WRBUFF_AVAIL_SHFT	32
-#define CA_ADMA_RDBUFF_AVAIL		(0x7full << 40)
-#define CA_ADMA_RDBUFF_AVAIL_SHFT	40
-#define CA_PCI_PIO_OP_STAT		(1ull << 47)
-#define CA_PDMA_OPQ_AVAIL		(0xfull << 48)
-#define CA_PDMA_OPQ_AVAIL_SHFT		48
-#define CA_PDMA_WRBUFF_AVAIL		(0xfull << 52)
-#define CA_PDMA_WRBUFF_AVAIL_SHFT	52
-#define CA_PDMA_RDBUFF_AVAIL		(0x3ull << 56)
-#define CA_PDMA_RDBUFF_AVAIL_SHFT	56
-	/* bits 63:58 unused */
-
-/* ==== ca_gart_aperature */
-#define CA_GART_AP_ENB_AGP		(1ull << 0)
-#define CA_GART_PAGE_SIZE		(1ull << 1)
-#define CA_GART_AP_ENB_PCI		(1ull << 2)
-	/* bits 11:3 unused */
-#define CA_GART_AP_SIZE			(0x3ffull << 12)
-#define CA_GART_AP_SIZE_SHFT		12
-#define CA_GART_AP_BASE			(0x3ffffffffffull << 22)
-#define CA_GART_AP_BASE_SHFT		22
-
-/* ==== ca_inta_dest_addr
-   ==== ca_intb_dest_addr 
-   ==== ca_err_int_dest_addr */
-	/* bits 2:0 unused */
-#define CA_INT_DEST_ADDR		(0x7ffffffffffffull << 3)
-#define CA_INT_DEST_ADDR_SHFT		3
-	/* bits 55:54 unused */
-#define CA_INT_DEST_VECT		(0xffull << 56)
-#define CA_INT_DEST_VECT_SHFT		56
-
-/* ==== ca_int_status */
-/* ==== ca_int_status_alias */
-/* ==== ca_mult_error */
-/* ==== ca_mult_error_alias */
-/* ==== ca_first_error */
-/* ==== ca_int_mask */
-#define CA_PCI_ERR			(1ull << 0)
-	/* bits 3:1 unused */
-#define CA_GART_FETCH_ERR		(1ull << 4)
-#define CA_GFX_WR_OVFLW			(1ull << 5)
-#define CA_PIO_REQ_OVFLW		(1ull << 6)
-#define CA_CRM_PKTERR			(1ull << 7)
-#define CA_CRM_DVERR			(1ull << 8)
-#define CA_TNUMTO			(1ull << 9)
-#define CA_CXM_RSP_CRED_OVFLW		(1ull << 10)
-#define CA_CXM_REQ_CRED_OVFLW		(1ull << 11)
-#define CA_PIO_INVALID_ADDR		(1ull << 12)
-#define CA_PCI_ARB_TO			(1ull << 13)
-#define CA_AGP_REQ_OFLOW		(1ull << 14)
-#define CA_SBA_TYPE1_ERR		(1ull << 15)
-	/* bit 16 unused */
-#define CA_INTA				(1ull << 17)
-#define CA_INTB				(1ull << 18)
-#define CA_MULT_INTA			(1ull << 19)
-#define CA_MULT_INTB			(1ull << 20)
-#define CA_GFX_CREDIT_OVFLW		(1ull << 21)
-	/* bits 63:22 unused */
-
-/* ==== ca_crm_pkterr_type */
-/* ==== ca_crm_pkterr_type_alias */
-#define CA_CRM_PKTERR_SBERR_HDR		(1ull << 0)
-#define CA_CRM_PKTERR_DIDN		(1ull << 1)
-#define CA_CRM_PKTERR_PACTYPE		(1ull << 2)
-#define CA_CRM_PKTERR_INV_TNUM		(1ull << 3)
-#define CA_CRM_PKTERR_ADDR_RNG		(1ull << 4)
-#define CA_CRM_PKTERR_ADDR_ALGN		(1ull << 5)
-#define CA_CRM_PKTERR_HDR_PARAM		(1ull << 6)
-#define CA_CRM_PKTERR_CW_ERR		(1ull << 7)
-#define CA_CRM_PKTERR_SBERR_NH		(1ull << 8)
-#define CA_CRM_PKTERR_EARLY_TERM	(1ull << 9)
-#define CA_CRM_PKTERR_EARLY_TAIL	(1ull << 10)
-#define CA_CRM_PKTERR_MSSNG_TAIL	(1ull << 11)
-#define CA_CRM_PKTERR_MSSNG_HDR		(1ull << 12)
-	/* bits 15:13 unused */
-#define CA_FIRST_CRM_PKTERR_SBERR_HDR	(1ull << 16)
-#define CA_FIRST_CRM_PKTERR_DIDN	(1ull << 17)
-#define CA_FIRST_CRM_PKTERR_PACTYPE	(1ull << 18)
-#define CA_FIRST_CRM_PKTERR_INV_TNUM	(1ull << 19)
-#define CA_FIRST_CRM_PKTERR_ADDR_RNG	(1ull << 20)
-#define CA_FIRST_CRM_PKTERR_ADDR_ALGN	(1ull << 21)
-#define CA_FIRST_CRM_PKTERR_HDR_PARAM	(1ull << 22)
-#define CA_FIRST_CRM_PKTERR_CW_ERR	(1ull << 23)
-#define CA_FIRST_CRM_PKTERR_SBERR_NH	(1ull << 24)
-#define CA_FIRST_CRM_PKTERR_EARLY_TERM	(1ull << 25)
-#define CA_FIRST_CRM_PKTERR_EARLY_TAIL	(1ull << 26)
-#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL	(1ull << 27)
-#define CA_FIRST_CRM_PKTERR_MSSNG_HDR	(1ull << 28)
-	/* bits 63:29 unused */
-
-/* ==== ca_crm_ct_error_detail_1 */
-#define CA_PKT_TYPE			(0xfull << 0)
-#define CA_PKT_TYPE_SHFT		0
-#define CA_SRC_ID			(0x3ull << 4)
-#define CA_SRC_ID_SHFT			4
-#define CA_DATA_SZ			(0x3ull << 6)
-#define CA_DATA_SZ_SHFT			6
-#define CA_TNUM				(0xffull << 8)
-#define CA_TNUM_SHFT			8
-#define CA_DW_DATA_EN			(0xffull << 16)
-#define CA_DW_DATA_EN_SHFT		16
-#define CA_GFX_CRED			(0xffull << 24)
-#define CA_GFX_CRED_SHFT		24
-#define CA_MEM_RD_PARAM			(0x3ull << 32)
-#define CA_MEM_RD_PARAM_SHFT		32
-#define CA_PIO_OP			(1ull << 34)
-#define CA_CW_ERR			(1ull << 35)
-	/* bits 62:36 unused */
-#define CA_VALID			(1ull << 63)
-
-/* ==== ca_crm_ct_error_detail_2 */
-	/* bits 2:0 unused */
-#define CA_PKT_ADDR			(0x1fffffffffffffull << 3)
-#define CA_PKT_ADDR_SHFT		3
-	/* bits 63:56 unused */
-
-/* ==== ca_crm_tnumto */
-#define CA_CRM_TNUMTO_VAL		(0xffull << 0)
-#define CA_CRM_TNUMTO_VAL_SHFT		0
-#define CA_CRM_TNUMTO_WR		(1ull << 8)
-	/* bits 63:9 unused */
-
-/* ==== ca_gart_err */
-#define CA_GART_ERR_SOURCE		(0x3ull << 0)
-#define CA_GART_ERR_SOURCE_SHFT		0
-	/* bits 3:2 unused */
-#define CA_GART_ERR_ADDR		(0xfffffffffull << 4)
-#define CA_GART_ERR_ADDR_SHFT		4
-	/* bits 63:40 unused */
-
-/* ==== ca_pcierr_type */
-#define CA_PCIERR_DATA			(0xffffffffull << 0)
-#define CA_PCIERR_DATA_SHFT		0
-#define CA_PCIERR_ENB			(0xfull << 32)
-#define CA_PCIERR_ENB_SHFT		32
-#define CA_PCIERR_CMD			(0xfull << 36)
-#define CA_PCIERR_CMD_SHFT		36
-#define CA_PCIERR_A64			(1ull << 40)
-#define CA_PCIERR_SLV_SERR		(1ull << 41)
-#define CA_PCIERR_SLV_WR_PERR		(1ull << 42)
-#define CA_PCIERR_SLV_RD_PERR		(1ull << 43)
-#define CA_PCIERR_MST_SERR		(1ull << 44)
-#define CA_PCIERR_MST_WR_PERR		(1ull << 45)
-#define CA_PCIERR_MST_RD_PERR		(1ull << 46)
-#define CA_PCIERR_MST_MABT		(1ull << 47)
-#define CA_PCIERR_MST_TABT		(1ull << 48)
-#define CA_PCIERR_MST_RETRY_TOUT	(1ull << 49)
-
-#define CA_PCIERR_TYPES \
-	(CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \
-	 CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \
-	 CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \
-	 CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT)
-
-	/* bits 63:50 unused */
-
-/* ==== ca_pci_dma_addr_extn */
-#define CA_UPPER_NODE_OFFSET		(0x3full << 0)
-#define CA_UPPER_NODE_OFFSET_SHFT	0
-	/* bits 7:6 unused */
-#define CA_CHIPLET_ID			(0x3ull << 8)
-#define CA_CHIPLET_ID_SHFT		8
-	/* bits 11:10 unused */
-#define CA_PCI_DMA_NODE_ID		(0xffffull << 12)
-#define CA_PCI_DMA_NODE_ID_SHFT		12
-	/* bits 27:26 unused */
-#define CA_PCI_DMA_PIO_MEM_TYPE		(1ull << 28)
-	/* bits 63:29 unused */
-
-
-/* ==== ca_agp_dma_addr_extn */
-	/* bits 19:0 unused */
-#define CA_AGP_DMA_NODE_ID		(0xffffull << 20)
-#define CA_AGP_DMA_NODE_ID_SHFT		20
-	/* bits 27:26 unused */
-#define CA_AGP_DMA_PIO_MEM_TYPE		(1ull << 28)
-	/* bits 63:29 unused */
-
-/* ==== ca_debug_vector_sel */
-#define CA_DEBUG_MN_VSEL		(0xfull << 0)
-#define CA_DEBUG_MN_VSEL_SHFT		0
-#define CA_DEBUG_PP_VSEL		(0xfull << 4)
-#define CA_DEBUG_PP_VSEL_SHFT		4
-#define CA_DEBUG_GW_VSEL		(0xfull << 8)
-#define CA_DEBUG_GW_VSEL_SHFT		8
-#define CA_DEBUG_GT_VSEL		(0xfull << 12)
-#define CA_DEBUG_GT_VSEL_SHFT		12
-#define CA_DEBUG_PD_VSEL		(0xfull << 16)
-#define CA_DEBUG_PD_VSEL_SHFT		16
-#define CA_DEBUG_AD_VSEL		(0xfull << 20)
-#define CA_DEBUG_AD_VSEL_SHFT		20
-#define CA_DEBUG_CX_VSEL		(0xfull << 24)
-#define CA_DEBUG_CX_VSEL_SHFT		24
-#define CA_DEBUG_CR_VSEL		(0xfull << 28)
-#define CA_DEBUG_CR_VSEL_SHFT		28
-#define CA_DEBUG_BA_VSEL		(0xfull << 32)
-#define CA_DEBUG_BA_VSEL_SHFT		32
-#define CA_DEBUG_PE_VSEL		(0xfull << 36)
-#define CA_DEBUG_PE_VSEL_SHFT		36
-#define CA_DEBUG_BO_VSEL		(0xfull << 40)
-#define CA_DEBUG_BO_VSEL_SHFT		40
-#define CA_DEBUG_BI_VSEL		(0xfull << 44)
-#define CA_DEBUG_BI_VSEL_SHFT		44
-#define CA_DEBUG_AS_VSEL		(0xfull << 48)
-#define CA_DEBUG_AS_VSEL_SHFT		48
-#define CA_DEBUG_PS_VSEL		(0xfull << 52)
-#define CA_DEBUG_PS_VSEL_SHFT		52
-#define CA_DEBUG_PM_VSEL		(0xfull << 56)
-#define CA_DEBUG_PM_VSEL_SHFT		56
-	/* bits 63:60 unused */
-
-/* ==== ca_debug_mux_core_sel */
-/* ==== ca_debug_mux_pci_sel */
-#define CA_DEBUG_MSEL0			(0x7ull << 0)
-#define CA_DEBUG_MSEL0_SHFT		0
-	/* bit 3 unused */
-#define CA_DEBUG_NSEL0			(0x7ull << 4)
-#define CA_DEBUG_NSEL0_SHFT		4
-	/* bit 7 unused */
-#define CA_DEBUG_MSEL1			(0x7ull << 8)
-#define CA_DEBUG_MSEL1_SHFT		8
-	/* bit 11 unused */
-#define CA_DEBUG_NSEL1			(0x7ull << 12)
-#define CA_DEBUG_NSEL1_SHFT		12
-	/* bit 15 unused */
-#define CA_DEBUG_MSEL2			(0x7ull << 16)
-#define CA_DEBUG_MSEL2_SHFT		16
-	/* bit 19 unused */
-#define CA_DEBUG_NSEL2			(0x7ull << 20)
-#define CA_DEBUG_NSEL2_SHFT		20
-	/* bit 23 unused */
-#define CA_DEBUG_MSEL3			(0x7ull << 24)
-#define CA_DEBUG_MSEL3_SHFT		24
-	/* bit 27 unused */
-#define CA_DEBUG_NSEL3			(0x7ull << 28)
-#define CA_DEBUG_NSEL3_SHFT		28
-	/* bit 31 unused */
-#define CA_DEBUG_MSEL4			(0x7ull << 32)
-#define CA_DEBUG_MSEL4_SHFT		32
-	/* bit 35 unused */
-#define CA_DEBUG_NSEL4			(0x7ull << 36)
-#define CA_DEBUG_NSEL4_SHFT		36
-	/* bit 39 unused */
-#define CA_DEBUG_MSEL5			(0x7ull << 40)
-#define CA_DEBUG_MSEL5_SHFT		40
-	/* bit 43 unused */
-#define CA_DEBUG_NSEL5			(0x7ull << 44)
-#define CA_DEBUG_NSEL5_SHFT		44
-	/* bit 47 unused */
-#define CA_DEBUG_MSEL6			(0x7ull << 48)
-#define CA_DEBUG_MSEL6_SHFT		48
-	/* bit 51 unused */
-#define CA_DEBUG_NSEL6			(0x7ull << 52)
-#define CA_DEBUG_NSEL6_SHFT		52
-	/* bit 55 unused */
-#define CA_DEBUG_MSEL7			(0x7ull << 56)
-#define CA_DEBUG_MSEL7_SHFT		56
-	/* bit 59 unused */
-#define CA_DEBUG_NSEL7			(0x7ull << 60)
-#define CA_DEBUG_NSEL7_SHFT		60
-	/* bit 63 unused */
-
-
-/* ==== ca_debug_domain_sel */
-#define CA_DEBUG_DOMAIN_L		(1ull << 0)
-#define CA_DEBUG_DOMAIN_H		(1ull << 1)
-	/* bits 63:2 unused */
-
-/* ==== ca_gart_ptr_table */
-#define CA_GART_PTR_VAL			(1ull << 0)
-	/* bits 11:1 unused */
-#define CA_GART_PTR_ADDR		(0xfffffffffffull << 12)
-#define CA_GART_PTR_ADDR_SHFT		12
-	/* bits 63:56 unused */
-
-/* ==== ca_gart_tlb_addr[0-7] */
-#define CA_GART_TLB_ADDR		(0xffffffffffffffull << 0)
-#define CA_GART_TLB_ADDR_SHFT		0
-	/* bits 62:56 unused */
-#define CA_GART_TLB_ENTRY_VAL		(1ull << 63)
-
-/*
- * PIO address space ranges for TIO:CA
- */
-
-/* CA internal registers */
-#define CA_PIO_ADMIN			0x00000000
-#define CA_PIO_ADMIN_LEN		0x00010000
-
-/* GFX Write Buffer - Diagnostics */
-#define CA_PIO_GFX			0x00010000
-#define CA_PIO_GFX_LEN			0x00010000
-
-/* AGP DMA Write Buffer - Diagnostics */
-#define CA_PIO_AGP_DMAWRITE		0x00020000
-#define CA_PIO_AGP_DMAWRITE_LEN		0x00010000
-
-/* AGP DMA READ Buffer - Diagnostics */
-#define CA_PIO_AGP_DMAREAD		0x00030000
-#define CA_PIO_AGP_DMAREAD_LEN		0x00010000
-
-/* PCI Config Type 0 */
-#define CA_PIO_PCI_TYPE0_CONFIG		0x01000000
-#define CA_PIO_PCI_TYPE0_CONFIG_LEN	0x01000000
-
-/* PCI Config Type 1 */
-#define CA_PIO_PCI_TYPE1_CONFIG		0x02000000
-#define CA_PIO_PCI_TYPE1_CONFIG_LEN	0x01000000
-
-/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */
-#define CA_PIO_PCI_IO			0x03000000
-#define CA_PIO_PCI_IO_LEN		0x05000000
-
-/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */
-/*	use Fast Write if enabled and coretalk packet type is a GFX request */
-#define CA_PIO_PCI_MEM_OFFSET		0x08000000
-#define CA_PIO_PCI_MEM_OFFSET_LEN	0x08000000
-
-/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */
-/*	use Fast Write if enabled and coretalk packet type is a GFX request */
-#define CA_PIO_PCI_MEM			0x40000000
-#define CA_PIO_PCI_MEM_LEN		0xc0000000
-
-/*
- * DMA space
- *
- * The CA aperature (ie. bus address range) mapped by the GART is segmented into
- * two parts.  The lower portion of the aperature is used for mapping 32 bit
- * PCI addresses which are managed by the dma interfaces in this file.  The
- * upper poprtion of the aperature is used for mapping 48 bit AGP addresses.
- * The AGP portion of the aperature is managed by the agpgart_be.c driver
- * in drivers/linux/agp.  There are ca-specific hooks in that driver to
- * manipulate the gart, but management of the AGP portion of the aperature
- * is the responsibility of that driver.
- *
- * CA allows three main types of DMA mapping:
- *
- * PCI 64-bit	Managed by this driver
- * PCI 32-bit 	Managed by this driver
- * AGP 48-bit	Managed by hooks in the /dev/agpgart driver
- *
- * All of the above can optionally be remapped through the GART.  The following
- * table lists the combinations of addressing types and GART remapping that
- * is currently supported by the driver (h/w supports all, s/w limits this):
- *
- *		PCI64		PCI32		AGP48
- * GART		no		yes		yes
- * Direct	yes		yes		no
- *
- * GART remapping of PCI64 is not done because there is no need to.  The
- * 64 bit PCI address holds all of the information necessary to target any
- * memory in the system.
- *
- * AGP48 is always mapped through the GART.  Management of the AGP48 portion
- * of the aperature is the responsibility of code in the agpgart_be driver.
- *
- * The non-64 bit bus address space will currently be partitioned like this:
- *
- *	0xffff_ffff_ffff	+--------
- *				| AGP48 direct
- *				| Space managed by this driver
- *	CA_AGP_DIRECT_BASE	+--------
- *				| AGP GART mapped (gfx aperature)
- *				| Space managed by /dev/agpgart driver
- *				| This range is exposed to the agpgart
- * 				| driver as the "graphics aperature"
- *	CA_AGP_MAPPED_BASE	+-----
- *				| PCI GART mapped
- *				| Space managed by this driver		
- *	CA_PCI32_MAPPED_BASE	+----
- *				| PCI32 direct
- *				| Space managed by this driver
- *	0xC000_0000		+--------
- *	(CA_PCI32_DIRECT_BASE)
- *
- * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE
- * is what we call the CA aperature.  Addresses falling in this range will
- * be remapped using the GART.
- *
- * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE
- * is what we call the graphics aperature.  This is a subset of the CA
- * aperature and is under the control of the agpgart_be driver.
- *
- * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are
- * somewhat arbitrary values.  The known constraints on choosing these is:
- *
- * 1)  CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size)
- *     must be one of the values supported by the ca_gart_aperature register.
- *     Currently valid values are: 4MB through 4096MB in powers of 2 increments
- *
- * 2)  CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size)
- *     must be in MB units since that's what the agpgart driver assumes.
- */
-
-/*
- * Define Bus DMA ranges.  These are configurable (see constraints above)
- * and will probably need tuning based on experience.
- */
-
-
-/*
- * 11/24/03
- * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it
- * generally unusable.  The problem is that for PCI direct 32 
- * DMA's, all 32 bits of the bus address are used to form the lower 32 bits
- * of the coretalk address, and coretalk bits 38:32 come from a register.
- * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available
- * for DMA (the rest is allocated to PIO), host node addresses need to be
- * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range
- * as well.  So there can be no PCI32 direct DMA below 3GB!!  For this
- * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes
- * tioca_dma_direct32() a noop but preserves the code flow should this issue
- * be fixed in a respin.
- *
- * For now, all PCI32 DMA's must be mapped through the GART.
- */
-
-#define CA_PCI32_DIRECT_BASE	0xC0000000UL	/* BASE not configurable */
-#define CA_PCI32_DIRECT_SIZE	0x00000000UL	/* 0 MB */
-
-#define CA_PCI32_MAPPED_BASE	0xC0000000UL
-#define CA_PCI32_MAPPED_SIZE	0x40000000UL	/* 2GB */
-
-#define CA_AGP_MAPPED_BASE	0x80000000UL
-#define CA_AGP_MAPPED_SIZE	0x40000000UL	/* 2GB */
-
-#define CA_AGP_DIRECT_BASE	0x40000000UL	/* 2GB */
-#define CA_AGP_DIRECT_SIZE	0x40000000UL
-
-#define CA_APERATURE_BASE	(CA_AGP_MAPPED_BASE)
-#define CA_APERATURE_SIZE	(CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE)
-
-#endif  /* _ASM_IA64_SN_TIO_TIOCA_H */
diff --git a/include/asm-ia64/sn/tioca_provider.h b/include/asm-ia64/sn/tioca_provider.h
deleted file mode 100644
index 9a820ac61be3..000000000000
--- a/include/asm-ia64/sn/tioca_provider.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
-#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
-
-#include <asm/sn/tioca.h>
-
-/*
- * WAR enables
- * Defines for individual WARs. Each is a bitmask of applicable
- * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B,
- * (3 << 1) == (rev A or rev B), etc
- */
-
-#define TIOCA_WAR_ENABLED(pv, tioca_common) \
-	((1 << tioca_common->ca_rev) & pv)
-
-  /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */
-#define PV907908 (1 << 1)
-  /* ATI config space problems after BIOS execution starts */
-#define PV908234 (1 << 1)
-  /* CA:AGPDMA write request data mismatch with ABC1CL merge */
-#define PV895469 (1 << 1)
-  /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/
-#define PV910244 (1 << 1)
-
-struct tioca_dmamap{
-	struct list_head	cad_list;	/* headed by ca_list */
-
-	dma_addr_t		cad_dma_addr;	/* Linux dma handle */
-	uint			cad_gart_entry; /* start entry in ca_gart_pagemap */
-	uint			cad_gart_size;	/* #entries for this map */
-};
-
-/*
- * Kernel only fields.  Prom may look at this stuff for debugging only.
- * Access this structure through the ca_kernel_private ptr.
- */
-
-struct tioca_common ;
-
-struct tioca_kernel {
-	struct tioca_common	*ca_common;	/* tioca this belongs to */
-	struct list_head	ca_list;	/* list of all ca's */
-	struct list_head	ca_dmamaps;
-	spinlock_t		ca_lock;	/* Kernel lock */
-	cnodeid_t		ca_closest_node;
-	struct list_head	*ca_devices;	/* bus->devices */
-
-	/*
-	 * General GART stuff
-	 */
-	u64	ca_ap_size;		/* size of aperature in bytes */
-	u32	ca_gart_entries;	/* # u64 entries in gart */
-	u32	ca_ap_pagesize; 	/* aperature page size in bytes */
-	u64	ca_ap_bus_base; 	/* bus address of CA aperature */
-	u64	ca_gart_size;		/* gart size in bytes */
-	u64	*ca_gart;		/* gart table vaddr */
-	u64	ca_gart_coretalk_addr;	/* gart coretalk addr */
-	u8		ca_gart_iscoherent;	/* used in tioca_tlbflush */
-
-	/* PCI GART convenience values */
-	u64	ca_pciap_base;		/* pci aperature bus base address */
-	u64	ca_pciap_size;		/* pci aperature size (bytes) */
-	u64	ca_pcigart_base;	/* gfx GART bus base address */
-	u64	*ca_pcigart;		/* gfx GART vm address */
-	u32	ca_pcigart_entries;
-	u32	ca_pcigart_start;	/* PCI start index in ca_gart */
-	void		*ca_pcigart_pagemap;
-
-	/* AGP GART convenience values */
-	u64	ca_gfxap_base;		/* gfx aperature bus base address */
-	u64	ca_gfxap_size;		/* gfx aperature size (bytes) */
-	u64	ca_gfxgart_base;	/* gfx GART bus base address */
-	u64	*ca_gfxgart;		/* gfx GART vm address */
-	u32	ca_gfxgart_entries;
-	u32	ca_gfxgart_start;	/* agpgart start index in ca_gart */
-};
-
-/*
- * Common tioca info shared between kernel and prom
- *
- * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES
- * TO THE PROM VERSION.
- */
-
-struct tioca_common {
-	struct pcibus_bussoft	ca_common;	/* common pciio header */
-
-	u32		ca_rev;
-	u32		ca_closest_nasid;
-
-	u64		ca_prom_private;
-	u64		ca_kernel_private;
-};
-
-/**
- * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry
- * @paddr: page address to convert
- *
- * Convert a system [coretalk] address to a GART entry.  GART entries are
- * formed using the following:
- *
- *     data = ( (1<<63) |  ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) | 
- * (REMAP_SYS_ADDR) ) >> 12 )
- *
- * DATA written to 1 GART TABLE Entry in system memory is remapped system
- * addr for 1 page 
- *
- * The data is for coretalk address format right shifted 12 bits with a
- * valid bit.
- *
- *	GART_TABLE_ENTRY [ 25:0 ]  -- REMAP_SYS_ADDRESS[37:12].
- *	GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id.
- *	GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID.
- *	GART_TABLE_ENTRY [ 63 ]    -- Valid Bit 
- */
-static inline u64
-tioca_paddr_to_gart(unsigned long paddr)
-{
-	/*
-	 * We are assuming right now that paddr already has the correct
-	 * format since the address from xtalk_dmaXXX should already have
-	 * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations.
-	 */
-
-	return ((paddr) >> 12) | (1UL << 63);
-}
-
-/**
- * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA
- * @page_addr: system page address to map
- */
-
-static inline unsigned long
-tioca_physpage_to_gart(u64 page_addr)
-{
-	u64 coretalk_addr;
-
-	coretalk_addr = PHYS_TO_TIODMA(page_addr);
-	if (!coretalk_addr) {
-		return 0;
-	}
-
-	return tioca_paddr_to_gart(coretalk_addr);
-}
-
-/**
- * tioca_tlbflush - invalidate cached SGI CA GART TLB entries
- * @tioca_kernel: CA context 
- *
- * Invalidate tlb entries for a given CA GART.  Main complexity is to account
- * for revA bug.
- */
-static inline void
-tioca_tlbflush(struct tioca_kernel *tioca_kernel)
-{
-	volatile u64 tmp;
-	volatile struct tioca __iomem *ca_base;
-	struct tioca_common *tioca_common;
-
-	tioca_common = tioca_kernel->ca_common;
-	ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base;
-
-	/*
-	 * Explicit flushes not needed if GART is in cached mode
-	 */
-	if (tioca_kernel->ca_gart_iscoherent) {
-		if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) {
-			/*
-			 * PV910244:  RevA CA needs explicit flushes.
-			 * Need to put GART into uncached mode before
-			 * flushing otherwise the explicit flush is ignored.
-			 *
-			 * Alternate WAR would be to leave GART cached and
-			 * touch every CL aligned GART entry.
-			 */
-
-			__sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
-			__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
-			__sn_setq_relaxed(&ca_base->ca_control2,
-			    (0x2ull << CA_GART_MEM_PARAM_SHFT));
-			tmp = __sn_readq_relaxed(&ca_base->ca_control2);
-		}
-
-		return;
-	}
-
-	/*
-	 * Gart in uncached mode ... need an explicit flush.
-	 */
-
-	__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
-	tmp = __sn_readq_relaxed(&ca_base->ca_control2);
-}
-
-extern u32	tioca_gart_found;
-extern struct list_head tioca_list;
-extern int tioca_init_provider(void);
-extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
-#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */
diff --git a/include/asm-ia64/sn/tioce.h b/include/asm-ia64/sn/tioce.h
deleted file mode 100644
index 893468e1b41b..000000000000
--- a/include/asm-ia64/sn/tioce.h
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef __ASM_IA64_SN_TIOCE_H__
-#define __ASM_IA64_SN_TIOCE_H__
-
-/* CE ASIC part & mfgr information  */
-#define TIOCE_PART_NUM			0xCE00
-#define TIOCE_SRC_ID			0x01
-#define TIOCE_REV_A			0x1
-
-/* CE Virtual PPB Vendor/Device IDs */
-#define CE_VIRT_PPB_VENDOR_ID		0x10a9
-#define CE_VIRT_PPB_DEVICE_ID		0x4002
-
-/* CE Host Bridge Vendor/Device IDs */
-#define CE_HOST_BRIDGE_VENDOR_ID	0x10a9
-#define CE_HOST_BRIDGE_DEVICE_ID	0x4001
-
-
-#define TIOCE_NUM_M40_ATES		4096
-#define TIOCE_NUM_M3240_ATES		2048
-#define TIOCE_NUM_PORTS			2
-
-/*
- * Register layout for TIOCE.  MMR offsets are shown at the far right of the
- * structure definition.
- */
-typedef volatile struct tioce {
-	/*
-	 * ADMIN : Administration Registers
-	 */
-	u64	ce_adm_id;				/* 0x000000 */
-	u64	ce_pad_000008;				/* 0x000008 */
-	u64	ce_adm_dyn_credit_status;		/* 0x000010 */
-	u64	ce_adm_last_credit_status;		/* 0x000018 */
-	u64	ce_adm_credit_limit;			/* 0x000020 */
-	u64	ce_adm_force_credit;			/* 0x000028 */
-	u64	ce_adm_control;				/* 0x000030 */
-	u64	ce_adm_mmr_chn_timeout;			/* 0x000038 */
-	u64	ce_adm_ssp_ure_timeout;			/* 0x000040 */
-	u64	ce_adm_ssp_dre_timeout;			/* 0x000048 */
-	u64	ce_adm_ssp_debug_sel;			/* 0x000050 */
-	u64	ce_adm_int_status;			/* 0x000058 */
-	u64	ce_adm_int_status_alias;		/* 0x000060 */
-	u64	ce_adm_int_mask;			/* 0x000068 */
-	u64	ce_adm_int_pending;			/* 0x000070 */
-	u64	ce_adm_force_int;			/* 0x000078 */
-	u64	ce_adm_ure_ups_buf_barrier_flush;	/* 0x000080 */
-	u64	ce_adm_int_dest[15];	    /* 0x000088 -- 0x0000F8 */
-	u64	ce_adm_error_summary;			/* 0x000100 */
-	u64	ce_adm_error_summary_alias;		/* 0x000108 */
-	u64	ce_adm_error_mask;			/* 0x000110 */
-	u64	ce_adm_first_error;			/* 0x000118 */
-	u64	ce_adm_error_overflow;			/* 0x000120 */
-	u64	ce_adm_error_overflow_alias;		/* 0x000128 */
-	u64	ce_pad_000130[2];	    /* 0x000130 -- 0x000138 */
-	u64	ce_adm_tnum_error;			/* 0x000140 */
-	u64	ce_adm_mmr_err_detail;			/* 0x000148 */
-	u64	ce_adm_msg_sram_perr_detail;		/* 0x000150 */
-	u64	ce_adm_bap_sram_perr_detail;		/* 0x000158 */
-	u64	ce_adm_ce_sram_perr_detail;		/* 0x000160 */
-	u64	ce_adm_ce_credit_oflow_detail;		/* 0x000168 */
-	u64	ce_adm_tx_link_idle_max_timer;		/* 0x000170 */
-	u64	ce_adm_pcie_debug_sel;			/* 0x000178 */
-	u64	ce_pad_000180[16];	    /* 0x000180 -- 0x0001F8 */
-
-	u64	ce_adm_pcie_debug_sel_top;		/* 0x000200 */
-	u64	ce_adm_pcie_debug_lat_sel_lo_top;	/* 0x000208 */
-	u64	ce_adm_pcie_debug_lat_sel_hi_top;	/* 0x000210 */
-	u64	ce_adm_pcie_debug_trig_sel_top;		/* 0x000218 */
-	u64	ce_adm_pcie_debug_trig_lat_sel_lo_top;	/* 0x000220 */
-	u64	ce_adm_pcie_debug_trig_lat_sel_hi_top;	/* 0x000228 */
-	u64	ce_adm_pcie_trig_compare_top;		/* 0x000230 */
-	u64	ce_adm_pcie_trig_compare_en_top;	/* 0x000238 */
-	u64	ce_adm_ssp_debug_sel_top;		/* 0x000240 */
-	u64	ce_adm_ssp_debug_lat_sel_lo_top;	/* 0x000248 */
-	u64	ce_adm_ssp_debug_lat_sel_hi_top;	/* 0x000250 */
-	u64	ce_adm_ssp_debug_trig_sel_top;		/* 0x000258 */
-	u64	ce_adm_ssp_debug_trig_lat_sel_lo_top;	/* 0x000260 */
-	u64	ce_adm_ssp_debug_trig_lat_sel_hi_top;	/* 0x000268 */
-	u64	ce_adm_ssp_trig_compare_top;		/* 0x000270 */
-	u64	ce_adm_ssp_trig_compare_en_top;		/* 0x000278 */
-	u64	ce_pad_000280[48];	    /* 0x000280 -- 0x0003F8 */
-
-	u64	ce_adm_bap_ctrl;			/* 0x000400 */
-	u64	ce_pad_000408[127];	    /* 0x000408 -- 0x0007F8 */
-
-	u64	ce_msg_buf_data63_0[35];    /* 0x000800 -- 0x000918 */
-	u64	ce_pad_000920[29];	    /* 0x000920 -- 0x0009F8 */
-
-	u64	ce_msg_buf_data127_64[35];  /* 0x000A00 -- 0x000B18 */
-	u64	ce_pad_000B20[29];	    /* 0x000B20 -- 0x000BF8 */
-
-	u64	ce_msg_buf_parity[35];	    /* 0x000C00 -- 0x000D18 */
-	u64	ce_pad_000D20[29];	    /* 0x000D20 -- 0x000DF8 */
-
-	u64	ce_pad_000E00[576];	    /* 0x000E00 -- 0x001FF8 */
-
-	/*
-	 * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2)
-	 * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000
-	 * NOTE: the comment offsets at far right: let 'z' = {2 or 3}
-	 */
-	#define ce_lsi(link_num)	ce_lsi[link_num-1]
-	struct ce_lsi_reg {
-		u64	ce_lsi_lpu_id;			/* 0x00z000 */
-		u64	ce_lsi_rst;			/* 0x00z008 */
-		u64	ce_lsi_dbg_stat;		/* 0x00z010 */
-		u64	ce_lsi_dbg_cfg;			/* 0x00z018 */
-		u64	ce_lsi_ltssm_ctrl;		/* 0x00z020 */
-		u64	ce_lsi_lk_stat;			/* 0x00z028 */
-		u64	ce_pad_00z030[2];   /* 0x00z030 -- 0x00z038 */
-		u64	ce_lsi_int_and_stat;		/* 0x00z040 */
-		u64	ce_lsi_int_mask;		/* 0x00z048 */
-		u64	ce_pad_00z050[22];  /* 0x00z050 -- 0x00z0F8 */
-		u64	ce_lsi_lk_perf_cnt_sel;		/* 0x00z100 */
-		u64	ce_pad_00z108;			/* 0x00z108 */
-		u64	ce_lsi_lk_perf_cnt_ctrl;	/* 0x00z110 */
-		u64	ce_pad_00z118;			/* 0x00z118 */
-		u64	ce_lsi_lk_perf_cnt1;		/* 0x00z120 */
-		u64	ce_lsi_lk_perf_cnt1_test;	/* 0x00z128 */
-		u64	ce_lsi_lk_perf_cnt2;		/* 0x00z130 */
-		u64	ce_lsi_lk_perf_cnt2_test;	/* 0x00z138 */
-		u64	ce_pad_00z140[24];  /* 0x00z140 -- 0x00z1F8 */
-		u64	ce_lsi_lk_lyr_cfg;		/* 0x00z200 */
-		u64	ce_lsi_lk_lyr_status;		/* 0x00z208 */
-		u64	ce_lsi_lk_lyr_int_stat;		/* 0x00z210 */
-		u64	ce_lsi_lk_ly_int_stat_test;	/* 0x00z218 */
-		u64	ce_lsi_lk_ly_int_stat_mask;	/* 0x00z220 */
-		u64	ce_pad_00z228[3];   /* 0x00z228 -- 0x00z238 */
-		u64	ce_lsi_fc_upd_ctl;		/* 0x00z240 */
-		u64	ce_pad_00z248[3];   /* 0x00z248 -- 0x00z258 */
-		u64	ce_lsi_flw_ctl_upd_to_timer;	/* 0x00z260 */
-		u64	ce_lsi_flw_ctl_upd_timer0;	/* 0x00z268 */
-		u64	ce_lsi_flw_ctl_upd_timer1;	/* 0x00z270 */
-		u64	ce_pad_00z278[49];  /* 0x00z278 -- 0x00z3F8 */
-		u64	ce_lsi_freq_nak_lat_thrsh;	/* 0x00z400 */
-		u64	ce_lsi_ack_nak_lat_tmr;		/* 0x00z408 */
-		u64	ce_lsi_rply_tmr_thr;		/* 0x00z410 */
-		u64	ce_lsi_rply_tmr;		/* 0x00z418 */
-		u64	ce_lsi_rply_num_stat;		/* 0x00z420 */
-		u64	ce_lsi_rty_buf_max_addr;	/* 0x00z428 */
-		u64	ce_lsi_rty_fifo_ptr;		/* 0x00z430 */
-		u64	ce_lsi_rty_fifo_rd_wr_ptr;	/* 0x00z438 */
-		u64	ce_lsi_rty_fifo_cred;		/* 0x00z440 */
-		u64	ce_lsi_seq_cnt;			/* 0x00z448 */
-		u64	ce_lsi_ack_sent_seq_num;	/* 0x00z450 */
-		u64	ce_lsi_seq_cnt_fifo_max_addr;	/* 0x00z458 */
-		u64	ce_lsi_seq_cnt_fifo_ptr;	/* 0x00z460 */
-		u64	ce_lsi_seq_cnt_rd_wr_ptr;	/* 0x00z468 */
-		u64	ce_lsi_tx_lk_ts_ctl;		/* 0x00z470 */
-		u64	ce_pad_00z478;			/* 0x00z478 */
-		u64	ce_lsi_mem_addr_ctl;		/* 0x00z480 */
-		u64	ce_lsi_mem_d_ld0;		/* 0x00z488 */
-		u64	ce_lsi_mem_d_ld1;		/* 0x00z490 */
-		u64	ce_lsi_mem_d_ld2;		/* 0x00z498 */
-		u64	ce_lsi_mem_d_ld3;		/* 0x00z4A0 */
-		u64	ce_lsi_mem_d_ld4;		/* 0x00z4A8 */
-		u64	ce_pad_00z4B0[2];   /* 0x00z4B0 -- 0x00z4B8 */
-		u64	ce_lsi_rty_d_cnt;		/* 0x00z4C0 */
-		u64	ce_lsi_seq_buf_cnt;		/* 0x00z4C8 */
-		u64	ce_lsi_seq_buf_bt_d;		/* 0x00z4D0 */
-		u64	ce_pad_00z4D8;			/* 0x00z4D8 */
-		u64	ce_lsi_ack_lat_thr;		/* 0x00z4E0 */
-		u64	ce_pad_00z4E8[3];   /* 0x00z4E8 -- 0x00z4F8 */
-		u64	ce_lsi_nxt_rcv_seq_1_cntr;	/* 0x00z500 */
-		u64	ce_lsi_unsp_dllp_rcvd;		/* 0x00z508 */
-		u64	ce_lsi_rcv_lk_ts_ctl;		/* 0x00z510 */
-		u64	ce_pad_00z518[29];  /* 0x00z518 -- 0x00z5F8 */
-		u64	ce_lsi_phy_lyr_cfg;		/* 0x00z600 */
-		u64	ce_pad_00z608;			/* 0x00z608 */
-		u64	ce_lsi_phy_lyr_int_stat;	/* 0x00z610 */
-		u64	ce_lsi_phy_lyr_int_stat_test;	/* 0x00z618 */
-		u64	ce_lsi_phy_lyr_int_mask;	/* 0x00z620 */
-		u64	ce_pad_00z628[11];  /* 0x00z628 -- 0x00z678 */
-		u64	ce_lsi_rcv_phy_cfg;		/* 0x00z680 */
-		u64	ce_lsi_rcv_phy_stat1;		/* 0x00z688 */
-		u64	ce_lsi_rcv_phy_stat2;		/* 0x00z690 */
-		u64	ce_lsi_rcv_phy_stat3;		/* 0x00z698 */
-		u64	ce_lsi_rcv_phy_int_stat;	/* 0x00z6A0 */
-		u64	ce_lsi_rcv_phy_int_stat_test;	/* 0x00z6A8 */
-		u64	ce_lsi_rcv_phy_int_mask;	/* 0x00z6B0 */
-		u64	ce_pad_00z6B8[9];   /* 0x00z6B8 -- 0x00z6F8 */
-		u64	ce_lsi_tx_phy_cfg;		/* 0x00z700 */
-		u64	ce_lsi_tx_phy_stat;		/* 0x00z708 */
-		u64	ce_lsi_tx_phy_int_stat;		/* 0x00z710 */
-		u64	ce_lsi_tx_phy_int_stat_test;	/* 0x00z718 */
-		u64	ce_lsi_tx_phy_int_mask;		/* 0x00z720 */
-		u64	ce_lsi_tx_phy_stat2;		/* 0x00z728 */
-		u64	ce_pad_00z730[10];  /* 0x00z730 -- 0x00z77F */
-		u64	ce_lsi_ltssm_cfg1;		/* 0x00z780 */
-		u64	ce_lsi_ltssm_cfg2;		/* 0x00z788 */
-		u64	ce_lsi_ltssm_cfg3;		/* 0x00z790 */
-		u64	ce_lsi_ltssm_cfg4;		/* 0x00z798 */
-		u64	ce_lsi_ltssm_cfg5;		/* 0x00z7A0 */
-		u64	ce_lsi_ltssm_stat1;		/* 0x00z7A8 */
-		u64	ce_lsi_ltssm_stat2;		/* 0x00z7B0 */
-		u64	ce_lsi_ltssm_int_stat;		/* 0x00z7B8 */
-		u64	ce_lsi_ltssm_int_stat_test;	/* 0x00z7C0 */
-		u64	ce_lsi_ltssm_int_mask;		/* 0x00z7C8 */
-		u64	ce_lsi_ltssm_stat_wr_en;	/* 0x00z7D0 */
-		u64	ce_pad_00z7D8[5];   /* 0x00z7D8 -- 0x00z7F8 */
-		u64	ce_lsi_gb_cfg1;			/* 0x00z800 */
-		u64	ce_lsi_gb_cfg2;			/* 0x00z808 */
-		u64	ce_lsi_gb_cfg3;			/* 0x00z810 */
-		u64	ce_lsi_gb_cfg4;			/* 0x00z818 */
-		u64	ce_lsi_gb_stat;			/* 0x00z820 */
-		u64	ce_lsi_gb_int_stat;		/* 0x00z828 */
-		u64	ce_lsi_gb_int_stat_test;	/* 0x00z830 */
-		u64	ce_lsi_gb_int_mask;		/* 0x00z838 */
-		u64	ce_lsi_gb_pwr_dn1;		/* 0x00z840 */
-		u64	ce_lsi_gb_pwr_dn2;		/* 0x00z848 */
-		u64	ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */
-	} ce_lsi[2];
-
-	u64	ce_pad_004000[10];	    /* 0x004000 -- 0x004048 */
-
-	/*
-	 * CRM: Coretalk Receive Module Registers
-	 */
-	u64	ce_crm_debug_mux;			/* 0x004050 */
-	u64	ce_pad_004058;				/* 0x004058 */
-	u64	ce_crm_ssp_err_cmd_wrd;			/* 0x004060 */
-	u64	ce_crm_ssp_err_addr;			/* 0x004068 */
-	u64	ce_crm_ssp_err_syn;			/* 0x004070 */
-
-	u64	ce_pad_004078[499];	    /* 0x004078 -- 0x005008 */
-
-	/*
-         * CXM: Coretalk Xmit Module Registers
-         */
-	u64	ce_cxm_dyn_credit_status;		/* 0x005010 */
-	u64	ce_cxm_last_credit_status;		/* 0x005018 */
-	u64	ce_cxm_credit_limit;			/* 0x005020 */
-	u64	ce_cxm_force_credit;			/* 0x005028 */
-	u64	ce_cxm_disable_bypass;			/* 0x005030 */
-	u64	ce_pad_005038[3];	    /* 0x005038 -- 0x005048 */
-	u64	ce_cxm_debug_mux;			/* 0x005050 */
-
-        u64        ce_pad_005058[501];         /* 0x005058 -- 0x005FF8 */
-
-	/*
-	 * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
-	 * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000
-	 * DTL: the comment offsets at far right: let 'y' = {6 or 8}
-	 *
-	 * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
-	 * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000
-	 * UTL: the comment offsets at far right: let 'z' = {7 or 9}
-	 */
-	#define ce_dtl(link_num)	ce_dtl_utl[link_num-1]
-	#define ce_utl(link_num)	ce_dtl_utl[link_num-1]
-	struct ce_dtl_utl_reg {
-		/* DTL */
-		u64	ce_dtl_dtdr_credit_limit;	/* 0x00y000 */
-		u64	ce_dtl_dtdr_credit_force;	/* 0x00y008 */
-		u64	ce_dtl_dyn_credit_status;	/* 0x00y010 */
-		u64	ce_dtl_dtl_last_credit_stat;	/* 0x00y018 */
-		u64	ce_dtl_dtl_ctrl;		/* 0x00y020 */
-		u64	ce_pad_00y028[5];   /* 0x00y028 -- 0x00y048 */
-		u64	ce_dtl_debug_sel;		/* 0x00y050 */
-		u64	ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */
-
-		/* UTL */
-		u64	ce_utl_utl_ctrl;		/* 0x00z000 */
-		u64	ce_utl_debug_sel;		/* 0x00z008 */
-		u64	ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */
-	} ce_dtl_utl[2];
-
-	u64	ce_pad_00A000[514];	    /* 0x00A000 -- 0x00B008 */
-
-	/*
-	 * URE: Upstream Request Engine
-         */
-	u64	ce_ure_dyn_credit_status;		/* 0x00B010 */
-	u64	ce_ure_last_credit_status;		/* 0x00B018 */
-	u64	ce_ure_credit_limit;			/* 0x00B020 */
-	u64	ce_pad_00B028;				/* 0x00B028 */
-	u64	ce_ure_control;				/* 0x00B030 */
-	u64	ce_ure_status;				/* 0x00B038 */
-	u64	ce_pad_00B040[2];	    /* 0x00B040 -- 0x00B048 */
-	u64	ce_ure_debug_sel;			/* 0x00B050 */
-	u64	ce_ure_pcie_debug_sel;			/* 0x00B058 */
-	u64	ce_ure_ssp_err_cmd_wrd;			/* 0x00B060 */
-	u64	ce_ure_ssp_err_addr;			/* 0x00B068 */
-	u64	ce_ure_page_map;			/* 0x00B070 */
-	u64	ce_ure_dir_map[TIOCE_NUM_PORTS];	/* 0x00B078 */
-	u64	ce_ure_pipe_sel1;			/* 0x00B088 */
-	u64	ce_ure_pipe_mask1;			/* 0x00B090 */
-	u64	ce_ure_pipe_sel2;			/* 0x00B098 */
-	u64	ce_ure_pipe_mask2;			/* 0x00B0A0 */
-	u64	ce_ure_pcie1_credits_sent;		/* 0x00B0A8 */
-	u64	ce_ure_pcie1_credits_used;		/* 0x00B0B0 */
-	u64	ce_ure_pcie1_credit_limit;		/* 0x00B0B8 */
-	u64	ce_ure_pcie2_credits_sent;		/* 0x00B0C0 */
-	u64	ce_ure_pcie2_credits_used;		/* 0x00B0C8 */
-	u64	ce_ure_pcie2_credit_limit;		/* 0x00B0D0 */
-	u64	ce_ure_pcie_force_credit;		/* 0x00B0D8 */
-	u64	ce_ure_rd_tnum_val;			/* 0x00B0E0 */
-	u64	ce_ure_rd_tnum_rsp_rcvd;		/* 0x00B0E8 */
-	u64	ce_ure_rd_tnum_esent_timer;		/* 0x00B0F0 */
-	u64	ce_ure_rd_tnum_error;			/* 0x00B0F8 */
-	u64	ce_ure_rd_tnum_first_cl;		/* 0x00B100 */
-	u64	ce_ure_rd_tnum_link_buf;		/* 0x00B108 */
-	u64	ce_ure_wr_tnum_val;			/* 0x00B110 */
-	u64	ce_ure_sram_err_addr0;			/* 0x00B118 */
-	u64	ce_ure_sram_err_addr1;			/* 0x00B120 */
-	u64	ce_ure_sram_err_addr2;			/* 0x00B128 */
-	u64	ce_ure_sram_rd_addr0;			/* 0x00B130 */
-	u64	ce_ure_sram_rd_addr1;			/* 0x00B138 */
-	u64	ce_ure_sram_rd_addr2;			/* 0x00B140 */
-	u64	ce_ure_sram_wr_addr0;			/* 0x00B148 */
-	u64	ce_ure_sram_wr_addr1;			/* 0x00B150 */
-	u64	ce_ure_sram_wr_addr2;			/* 0x00B158 */
-	u64	ce_ure_buf_flush10;			/* 0x00B160 */
-	u64	ce_ure_buf_flush11;			/* 0x00B168 */
-	u64	ce_ure_buf_flush12;			/* 0x00B170 */
-	u64	ce_ure_buf_flush13;			/* 0x00B178 */
-	u64	ce_ure_buf_flush20;			/* 0x00B180 */
-	u64	ce_ure_buf_flush21;			/* 0x00B188 */
-	u64	ce_ure_buf_flush22;			/* 0x00B190 */
-	u64	ce_ure_buf_flush23;			/* 0x00B198 */
-	u64	ce_ure_pcie_control1;			/* 0x00B1A0 */
-	u64	ce_ure_pcie_control2;			/* 0x00B1A8 */
-
-	u64	ce_pad_00B1B0[458];	    /* 0x00B1B0 -- 0x00BFF8 */
-
-	/* Upstream Data Buffer, Port1 */
-	struct ce_ure_maint_ups_dat1_data {
-		u64	data63_0[512];	    /* 0x00C000 -- 0x00CFF8 */
-		u64	data127_64[512];    /* 0x00D000 -- 0x00DFF8 */
-		u64	parity[512];	    /* 0x00E000 -- 0x00EFF8 */
-	} ce_ure_maint_ups_dat1;
-
-	/* Upstream Header Buffer, Port1 */
-	struct ce_ure_maint_ups_hdr1_data {
-		u64	data63_0[512];	    /* 0x00F000 -- 0x00FFF8 */
-		u64	data127_64[512];    /* 0x010000 -- 0x010FF8 */
-		u64	parity[512];	    /* 0x011000 -- 0x011FF8 */
-	} ce_ure_maint_ups_hdr1;
-
-	/* Upstream Data Buffer, Port2 */
-	struct ce_ure_maint_ups_dat2_data {
-		u64	data63_0[512];	    /* 0x012000 -- 0x012FF8 */
-		u64	data127_64[512];    /* 0x013000 -- 0x013FF8 */
-		u64	parity[512];	    /* 0x014000 -- 0x014FF8 */
-	} ce_ure_maint_ups_dat2;
-
-	/* Upstream Header Buffer, Port2 */
-	struct ce_ure_maint_ups_hdr2_data {
-		u64	data63_0[512];	    /* 0x015000 -- 0x015FF8 */
-		u64	data127_64[512];    /* 0x016000 -- 0x016FF8 */
-		u64	parity[512];	    /* 0x017000 -- 0x017FF8 */
-	} ce_ure_maint_ups_hdr2;
-
-	/* Downstream Data Buffer */
-	struct ce_ure_maint_dns_dat_data {
-		u64	data63_0[512];	    /* 0x018000 -- 0x018FF8 */
-		u64	data127_64[512];    /* 0x019000 -- 0x019FF8 */
-		u64	parity[512];	    /* 0x01A000 -- 0x01AFF8 */
-	} ce_ure_maint_dns_dat;
-
-	/* Downstream Header Buffer */
-	struct	ce_ure_maint_dns_hdr_data {
-		u64	data31_0[64];	    /* 0x01B000 -- 0x01B1F8 */
-		u64	data95_32[64];	    /* 0x01B200 -- 0x01B3F8 */
-		u64	parity[64];	    /* 0x01B400 -- 0x01B5F8 */
-	} ce_ure_maint_dns_hdr;
-
-	/* RCI Buffer Data */
-	struct	ce_ure_maint_rci_data {
-		u64	data41_0[64];	    /* 0x01B600 -- 0x01B7F8 */
-		u64	data69_42[64];	    /* 0x01B800 -- 0x01B9F8 */
-	} ce_ure_maint_rci;
-
-	/* Response Queue */
-	u64	ce_ure_maint_rspq[64];	    /* 0x01BA00 -- 0x01BBF8 */
-
-	u64	ce_pad_01C000[4224];	    /* 0x01BC00 -- 0x023FF8 */
-
-	/* Admin Build-a-Packet Buffer */
-	struct	ce_adm_maint_bap_buf_data {
-		u64	data63_0[258];	    /* 0x024000 -- 0x024808 */
-		u64	data127_64[258];    /* 0x024810 -- 0x025018 */
-		u64	parity[258];	    /* 0x025020 -- 0x025828 */
-	} ce_adm_maint_bap_buf;
-
-	u64	ce_pad_025830[5370];	    /* 0x025830 -- 0x02FFF8 */
-
-	/* URE: 40bit PMU ATE Buffer */		    /* 0x030000 -- 0x037FF8 */
-	u64	ce_ure_ate40[TIOCE_NUM_M40_ATES];
-
-	/* URE: 32/40bit PMU ATE Buffer */	    /* 0x038000 -- 0x03BFF8 */
-	u64	ce_ure_ate3240[TIOCE_NUM_M3240_ATES];
-
-	u64	ce_pad_03C000[2050];	    /* 0x03C000 -- 0x040008 */
-
-	/*
-	 * DRE: Down Stream Request Engine
-         */
-	u64	ce_dre_dyn_credit_status1;		/* 0x040010 */
-	u64	ce_dre_dyn_credit_status2;		/* 0x040018 */
-	u64	ce_dre_last_credit_status1;		/* 0x040020 */
-	u64	ce_dre_last_credit_status2;		/* 0x040028 */
-	u64	ce_dre_credit_limit1;			/* 0x040030 */
-	u64	ce_dre_credit_limit2;			/* 0x040038 */
-	u64	ce_dre_force_credit1;			/* 0x040040 */
-	u64	ce_dre_force_credit2;			/* 0x040048 */
-	u64	ce_dre_debug_mux1;			/* 0x040050 */
-	u64	ce_dre_debug_mux2;			/* 0x040058 */
-	u64	ce_dre_ssp_err_cmd_wrd;			/* 0x040060 */
-	u64	ce_dre_ssp_err_addr;			/* 0x040068 */
-	u64	ce_dre_comp_err_cmd_wrd;		/* 0x040070 */
-	u64	ce_dre_comp_err_addr;			/* 0x040078 */
-	u64	ce_dre_req_status;			/* 0x040080 */
-	u64	ce_dre_config1;				/* 0x040088 */
-	u64	ce_dre_config2;				/* 0x040090 */
-	u64	ce_dre_config_req_status;		/* 0x040098 */
-	u64	ce_pad_0400A0[12];	    /* 0x0400A0 -- 0x0400F8 */
-	u64	ce_dre_dyn_fifo;			/* 0x040100 */
-	u64	ce_pad_040108[3];	    /* 0x040108 -- 0x040118 */
-	u64	ce_dre_last_fifo;			/* 0x040120 */
-
-	u64	ce_pad_040128[27];	    /* 0x040128 -- 0x0401F8 */
-
-	/* DRE Downstream Head Queue */
-	struct	ce_dre_maint_ds_head_queue {
-		u64	data63_0[32];	    /* 0x040200 -- 0x0402F8 */
-		u64	data127_64[32];	    /* 0x040300 -- 0x0403F8 */
-		u64	parity[32];	    /* 0x040400 -- 0x0404F8 */
-	} ce_dre_maint_ds_head_q;
-
-	u64	ce_pad_040500[352];	    /* 0x040500 -- 0x040FF8 */
-
-	/* DRE Downstream Data Queue */
-	struct	ce_dre_maint_ds_data_queue {
-		u64	data63_0[256];	    /* 0x041000 -- 0x0417F8 */
-		u64	ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */
-		u64	data127_64[256];    /* 0x042000 -- 0x0427F8 */
-		u64	ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */
-		u64	parity[256];	    /* 0x043000 -- 0x0437F8 */
-		u64	ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */
-	} ce_dre_maint_ds_data_q;
-
-	/* DRE URE Upstream Response Queue */
-	struct	ce_dre_maint_ure_us_rsp_queue {
-		u64	data63_0[8];	    /* 0x044000 -- 0x044038 */
-		u64	ce_pad_044040[24];  /* 0x044040 -- 0x0440F8 */
-		u64	data127_64[8];      /* 0x044100 -- 0x044138 */
-		u64	ce_pad_044140[24];  /* 0x044140 -- 0x0441F8 */
-		u64	parity[8];	    /* 0x044200 -- 0x044238 */
-		u64	ce_pad_044240[24];  /* 0x044240 -- 0x0442F8 */
-	} ce_dre_maint_ure_us_rsp_q;
-
-	u64 	ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */
-
-	u64	ce_end_of_struct;			/* 0x044400 */
-} tioce_t;
-
-/* ce_lsiX_gb_cfg1 register bit masks & shifts */
-#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT	0
-#define CE_LSI_GB_CFG1_RXL0S_THS_MASK	(0xffULL << 0)
-#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT	8
-#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK	(0xfULL << 8);
-#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT	12
-#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK	(0x7ULL << 12)
-#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT	15
-#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK	(0x1ULL << 15)
-#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT	16
-#define CE_LSI_GB_CFG1_LPBK_SEL_MASK	(0x3ULL << 16)
-#define CE_LSI_GB_CFG1_LPBK_EN_SHFT	18
-#define CE_LSI_GB_CFG1_LPBK_EN_MASK	(0x1ULL << 18)
-#define CE_LSI_GB_CFG1_RVRS_LB_SHFT	19
-#define CE_LSI_GB_CFG1_RVRS_LB_MASK	(0x1ULL << 19)
-#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT	20
-#define CE_LSI_GB_CFG1_RVRS_CLK_MASK	(0x3ULL << 20)
-#define CE_LSI_GB_CFG1_SLF_TS_SHFT	24
-#define CE_LSI_GB_CFG1_SLF_TS_MASK	(0xfULL << 24)
-
-/* ce_adm_int_mask/ce_adm_int_status register bit defines */
-#define CE_ADM_INT_CE_ERROR_SHFT		0
-#define CE_ADM_INT_LSI1_IP_ERROR_SHFT		1
-#define CE_ADM_INT_LSI2_IP_ERROR_SHFT		2
-#define CE_ADM_INT_PCIE_ERROR_SHFT		3
-#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT	4
-#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT	5
-#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT	6
-#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT	7
-#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT	8
-#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT	9
-#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT	10
-#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT	11
-#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT	12
-#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT	13
-#define CE_ADM_INT_PCIE_MSG_SHFT		14 /*see int_dest_14*/
-#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT		14
-#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT		15
-#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT		16
-#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT		17
-#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT	22
-#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT	23
-
-/* ce_adm_force_int register bit defines */
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT	0
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT	1
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT	2
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT	3
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT	4
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT	5
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT	6
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT	7
-#define CE_ADM_FORCE_INT_ALWAYS_SHFT		8
-
-/* ce_adm_int_dest register bit masks & shifts */
-#define INTR_VECTOR_SHFT			56
-
-/* ce_adm_error_mask and ce_adm_error_summary register bit masks */
-#define CE_ADM_ERR_CRM_SSP_REQ_INVALID			(0x1ULL <<  0)
-#define CE_ADM_ERR_SSP_REQ_HEADER			(0x1ULL <<  1)
-#define CE_ADM_ERR_SSP_RSP_HEADER			(0x1ULL <<  2)
-#define CE_ADM_ERR_SSP_PROTOCOL_ERROR			(0x1ULL <<  3)
-#define CE_ADM_ERR_SSP_SBE				(0x1ULL <<  4)
-#define CE_ADM_ERR_SSP_MBE				(0x1ULL <<  5)
-#define CE_ADM_ERR_CXM_CREDIT_OFLOW			(0x1ULL <<  6)
-#define CE_ADM_ERR_DRE_SSP_REQ_INVAL			(0x1ULL <<  7)
-#define CE_ADM_ERR_SSP_REQ_LONG				(0x1ULL <<  8)
-#define CE_ADM_ERR_SSP_REQ_OFLOW			(0x1ULL <<  9)
-#define CE_ADM_ERR_SSP_REQ_SHORT			(0x1ULL << 10)
-#define CE_ADM_ERR_SSP_REQ_SIDEBAND			(0x1ULL << 11)
-#define CE_ADM_ERR_SSP_REQ_ADDR_ERR			(0x1ULL << 12)
-#define CE_ADM_ERR_SSP_REQ_BAD_BE			(0x1ULL << 13)
-#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT			(0x1ULL << 14)
-#define CE_ADM_ERR_PCIE_UNEXP_COMPL			(0x1ULL << 15)
-#define CE_ADM_ERR_PCIE_ERR_COMPL			(0x1ULL << 16)
-#define CE_ADM_ERR_DRE_CREDIT_OFLOW			(0x1ULL << 17)
-#define CE_ADM_ERR_DRE_SRAM_PE				(0x1ULL << 18)
-#define CE_ADM_ERR_SSP_RSP_INVALID			(0x1ULL << 19)
-#define CE_ADM_ERR_SSP_RSP_LONG				(0x1ULL << 20)
-#define CE_ADM_ERR_SSP_RSP_SHORT			(0x1ULL << 21)
-#define CE_ADM_ERR_SSP_RSP_SIDEBAND			(0x1ULL << 22)
-#define CE_ADM_ERR_URE_SSP_RSP_UNEXP			(0x1ULL << 23)
-#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT		(0x1ULL << 24)
-#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT		(0x1ULL << 25)
-#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT		(0x1ULL << 26)
-#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT			(0x1ULL << 27)
-#define CE_ADM_ERR_URE_CREDIT_OFLOW			(0x1ULL << 28)
-#define CE_ADM_ERR_URE_SRAM_PE				(0x1ULL << 29)
-#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP			(0x1ULL << 30)
-#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT			(0x1ULL << 31)
-#define CE_ADM_ERR_MMR_ACCESS_ERROR			(0x1ULL << 32)
-#define CE_ADM_ERR_MMR_ADDR_ERROR			(0x1ULL << 33)
-#define CE_ADM_ERR_ADM_CREDIT_OFLOW			(0x1ULL << 34)
-#define CE_ADM_ERR_ADM_SRAM_PE				(0x1ULL << 35)
-#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR		(0x1ULL << 36)
-#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR		(0x1ULL << 37)
-#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR	(0x1ULL << 38)
-#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR	(0x1ULL << 39)
-#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR		(0x1ULL << 40)
-#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR		(0x1ULL << 41)
-#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR		(0x1ULL << 42)
-#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR		(0x1ULL << 43)
-#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR		(0x1ULL << 44)
-#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR		(0x1ULL << 45)
-#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR		(0x1ULL << 46)
-#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR		(0x1ULL << 47)
-#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR	(0x1ULL << 48)
-#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR	(0x1ULL << 49)
-#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR		(0x1ULL << 50)
-#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR		(0x1ULL << 51)
-#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR		(0x1ULL << 52)
-#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR		(0x1ULL << 53)
-#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR		(0x1ULL << 54)
-#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR		(0x1ULL << 55)
-#define CE_ADM_ERR_PORT1_PCIE_COR_ERR			(0x1ULL << 56)
-#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR			(0x1ULL << 57)
-#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR			(0x1ULL << 58)
-#define CE_ADM_ERR_PORT2_PCIE_COR_ERR			(0x1ULL << 59)
-#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR			(0x1ULL << 60)
-#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR			(0x1ULL << 61)
-
-/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */
-#define FLUSH_SEL_PORT1_PIPE0_SHFT	0
-#define FLUSH_SEL_PORT1_PIPE1_SHFT	4
-#define FLUSH_SEL_PORT1_PIPE2_SHFT	8
-#define FLUSH_SEL_PORT1_PIPE3_SHFT	12
-#define FLUSH_SEL_PORT2_PIPE0_SHFT	16
-#define FLUSH_SEL_PORT2_PIPE1_SHFT	20
-#define FLUSH_SEL_PORT2_PIPE2_SHFT	24
-#define FLUSH_SEL_PORT2_PIPE3_SHFT	28
-
-/* ce_dre_config1 register bit masks and shifts */
-#define CE_DRE_RO_ENABLE		(0x1ULL << 0)
-#define CE_DRE_DYN_RO_ENABLE		(0x1ULL << 1)
-#define CE_DRE_SUP_CONFIG_COMP_ERROR	(0x1ULL << 2)
-#define CE_DRE_SUP_IO_COMP_ERROR	(0x1ULL << 3)
-#define CE_DRE_ADDR_MODE_SHFT		4
-
-/* ce_dre_config_req_status register bit masks */
-#define CE_DRE_LAST_CONFIG_COMPLETION	(0x7ULL << 0)
-#define CE_DRE_DOWNSTREAM_CONFIG_ERROR	(0x1ULL << 3)
-#define CE_DRE_CONFIG_COMPLETION_VALID	(0x1ULL << 4)
-#define CE_DRE_CONFIG_REQUEST_ACTIVE	(0x1ULL << 5)
-
-/* ce_ure_control register bit masks & shifts */
-#define CE_URE_RD_MRG_ENABLE		(0x1ULL << 0)
-#define CE_URE_WRT_MRG_ENABLE1		(0x1ULL << 4)
-#define CE_URE_WRT_MRG_ENABLE2		(0x1ULL << 5)
-#define CE_URE_WRT_MRG_TIMER_SHFT	12
-#define CE_URE_WRT_MRG_TIMER_MASK	(0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT)
-#define CE_URE_WRT_MRG_TIMER(x)		(((u64)(x) << \
-					  CE_URE_WRT_MRG_TIMER_SHFT) & \
-					 CE_URE_WRT_MRG_TIMER_MASK)
-#define CE_URE_RSPQ_BYPASS_DISABLE	(0x1ULL << 24)
-#define CE_URE_UPS_DAT1_PAR_DISABLE	(0x1ULL << 32)
-#define CE_URE_UPS_HDR1_PAR_DISABLE	(0x1ULL << 33)
-#define CE_URE_UPS_DAT2_PAR_DISABLE	(0x1ULL << 34)
-#define CE_URE_UPS_HDR2_PAR_DISABLE	(0x1ULL << 35)
-#define CE_URE_ATE_PAR_DISABLE		(0x1ULL << 36)
-#define CE_URE_RCI_PAR_DISABLE		(0x1ULL << 37)
-#define CE_URE_RSPQ_PAR_DISABLE		(0x1ULL << 38)
-#define CE_URE_DNS_DAT_PAR_DISABLE	(0x1ULL << 39)
-#define CE_URE_DNS_HDR_PAR_DISABLE	(0x1ULL << 40)
-#define CE_URE_MALFORM_DISABLE		(0x1ULL << 44)
-#define CE_URE_UNSUP_DISABLE		(0x1ULL << 45)
-
-/* ce_ure_page_map register bit masks & shifts */
-#define CE_URE_ATE3240_ENABLE		(0x1ULL << 0)
-#define CE_URE_ATE40_ENABLE 		(0x1ULL << 1)
-#define CE_URE_PAGESIZE_SHFT		4
-#define CE_URE_PAGESIZE_MASK		(0x7ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_4K_PAGESIZE		(0x0ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_16K_PAGESIZE		(0x1ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_64K_PAGESIZE		(0x2ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_128K_PAGESIZE		(0x3ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_256K_PAGESIZE		(0x4ULL << CE_URE_PAGESIZE_SHFT)
-
-/* ce_ure_pipe_sel register bit masks & shifts */
-#define PKT_TRAFIC_SHRT			16
-#define BUS_SRC_ID_SHFT			8
-#define DEV_SRC_ID_SHFT			3
-#define FNC_SRC_ID_SHFT			0
-#define CE_URE_TC_MASK			(0x07ULL << PKT_TRAFIC_SHRT)
-#define CE_URE_BUS_MASK			(0xFFULL << BUS_SRC_ID_SHFT)
-#define CE_URE_DEV_MASK			(0x1FULL << DEV_SRC_ID_SHFT)
-#define CE_URE_FNC_MASK			(0x07ULL << FNC_SRC_ID_SHFT)
-#define CE_URE_PIPE_BUS(b)		(((u64)(b) << BUS_SRC_ID_SHFT) & \
-					 CE_URE_BUS_MASK)
-#define CE_URE_PIPE_DEV(d)		(((u64)(d) << DEV_SRC_ID_SHFT) & \
-					 CE_URE_DEV_MASK)
-#define CE_URE_PIPE_FNC(f)		(((u64)(f) << FNC_SRC_ID_SHFT) & \
-					 CE_URE_FNC_MASK)
-
-#define CE_URE_SEL1_SHFT		0
-#define CE_URE_SEL2_SHFT		20
-#define CE_URE_SEL3_SHFT		40
-#define CE_URE_SEL1_MASK		(0x7FFFFULL << CE_URE_SEL1_SHFT)
-#define CE_URE_SEL2_MASK		(0x7FFFFULL << CE_URE_SEL2_SHFT)
-#define CE_URE_SEL3_MASK		(0x7FFFFULL << CE_URE_SEL3_SHFT)
-
-
-/* ce_ure_pipe_mask register bit masks & shifts */
-#define CE_URE_MASK1_SHFT		0
-#define CE_URE_MASK2_SHFT		20
-#define CE_URE_MASK3_SHFT		40
-#define CE_URE_MASK1_MASK		(0x7FFFFULL << CE_URE_MASK1_SHFT)
-#define CE_URE_MASK2_MASK		(0x7FFFFULL << CE_URE_MASK2_SHFT)
-#define CE_URE_MASK3_MASK		(0x7FFFFULL << CE_URE_MASK3_SHFT)
-
-
-/* ce_ure_pcie_control1 register bit masks & shifts */
-#define CE_URE_SI			(0x1ULL << 0)
-#define CE_URE_ELAL_SHFT		4
-#define CE_URE_ELAL_MASK		(0x7ULL << CE_URE_ELAL_SHFT)
-#define CE_URE_ELAL_SET(n)		(((u64)(n) << CE_URE_ELAL_SHFT) & \
-					 CE_URE_ELAL_MASK)
-#define CE_URE_ELAL1_SHFT		8
-#define CE_URE_ELAL1_MASK		(0x7ULL << CE_URE_ELAL1_SHFT)
-#define CE_URE_ELAL1_SET(n)		(((u64)(n) << CE_URE_ELAL1_SHFT) & \
-					 CE_URE_ELAL1_MASK)
-#define CE_URE_SCC			(0x1ULL << 12)
-#define CE_URE_PN1_SHFT			16
-#define CE_URE_PN1_MASK			(0xFFULL << CE_URE_PN1_SHFT)
-#define CE_URE_PN2_SHFT			24
-#define CE_URE_PN2_MASK			(0xFFULL << CE_URE_PN2_SHFT)
-#define CE_URE_PN1_SET(n)		(((u64)(n) << CE_URE_PN1_SHFT) & \
-					 CE_URE_PN1_MASK)
-#define CE_URE_PN2_SET(n)		(((u64)(n) << CE_URE_PN2_SHFT) & \
-					 CE_URE_PN2_MASK)
-
-/* ce_ure_pcie_control2 register bit masks & shifts */
-#define CE_URE_ABP			(0x1ULL << 0)
-#define CE_URE_PCP			(0x1ULL << 1)
-#define CE_URE_MSP			(0x1ULL << 2)
-#define CE_URE_AIP			(0x1ULL << 3)
-#define CE_URE_PIP			(0x1ULL << 4)
-#define CE_URE_HPS			(0x1ULL << 5)
-#define CE_URE_HPC			(0x1ULL << 6)
-#define CE_URE_SPLV_SHFT		7
-#define CE_URE_SPLV_MASK		(0xFFULL << CE_URE_SPLV_SHFT)
-#define CE_URE_SPLV_SET(n)		(((u64)(n) << CE_URE_SPLV_SHFT) & \
-					 CE_URE_SPLV_MASK)
-#define CE_URE_SPLS_SHFT		15
-#define CE_URE_SPLS_MASK		(0x3ULL << CE_URE_SPLS_SHFT)
-#define CE_URE_SPLS_SET(n)		(((u64)(n) << CE_URE_SPLS_SHFT) & \
-					 CE_URE_SPLS_MASK)
-#define CE_URE_PSN1_SHFT		19
-#define CE_URE_PSN1_MASK		(0x1FFFULL << CE_URE_PSN1_SHFT)
-#define CE_URE_PSN2_SHFT		32
-#define CE_URE_PSN2_MASK		(0x1FFFULL << CE_URE_PSN2_SHFT)
-#define CE_URE_PSN1_SET(n)		(((u64)(n) << CE_URE_PSN1_SHFT) & \
-					 CE_URE_PSN1_MASK)
-#define CE_URE_PSN2_SET(n)		(((u64)(n) << CE_URE_PSN2_SHFT) & \
-					 CE_URE_PSN2_MASK)
-
-/*
- * PIO address space ranges for CE
- */
-
-/* Local CE Registers Space */
-#define CE_PIO_MMR			0x00000000
-#define CE_PIO_MMR_LEN			0x04000000
-
-/* PCI Compatible Config Space */
-#define CE_PIO_CONFIG_SPACE		0x04000000
-#define CE_PIO_CONFIG_SPACE_LEN		0x04000000
-
-/* PCI I/O Space Alias */
-#define CE_PIO_IO_SPACE_ALIAS		0x08000000
-#define CE_PIO_IO_SPACE_ALIAS_LEN	0x08000000
-
-/* PCI Enhanced Config Space */
-#define CE_PIO_E_CONFIG_SPACE		0x10000000
-#define CE_PIO_E_CONFIG_SPACE_LEN	0x10000000
-
-/* PCI I/O Space */
-#define CE_PIO_IO_SPACE			0x100000000
-#define CE_PIO_IO_SPACE_LEN		0x100000000
-
-/* PCI MEM Space */
-#define CE_PIO_MEM_SPACE		0x200000000
-#define CE_PIO_MEM_SPACE_LEN		TIO_HWIN_SIZE
-
-
-/*
- * CE PCI Enhanced Config Space shifts & masks
- */
-#define CE_E_CONFIG_BUS_SHFT		20
-#define CE_E_CONFIG_BUS_MASK		(0xFF << CE_E_CONFIG_BUS_SHFT)
-#define CE_E_CONFIG_DEVICE_SHFT		15
-#define CE_E_CONFIG_DEVICE_MASK		(0x1F << CE_E_CONFIG_DEVICE_SHFT)
-#define CE_E_CONFIG_FUNC_SHFT		12
-#define CE_E_CONFIG_FUNC_MASK		(0x7  << CE_E_CONFIG_FUNC_SHFT)
-
-#endif /* __ASM_IA64_SN_TIOCE_H__ */
diff --git a/include/asm-ia64/sn/tioce_provider.h b/include/asm-ia64/sn/tioce_provider.h
deleted file mode 100644
index 32c32f30b099..000000000000
--- a/include/asm-ia64/sn/tioce_provider.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_CE_PROVIDER_H
-#define _ASM_IA64_SN_CE_PROVIDER_H
-
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/tioce.h>
-
-/*
- * Common TIOCE structure shared between the prom and kernel
- *
- * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE
- * PROM VERSION.
- */
-struct tioce_common {
-	struct pcibus_bussoft	ce_pcibus;	/* common pciio header */
-
-	u32		ce_rev;
-	u64		ce_kernel_private;
-	u64		ce_prom_private;
-};
-
-struct tioce_kernel {
-	struct tioce_common	*ce_common;
-	spinlock_t		ce_lock;
-	struct list_head	ce_dmamap_list;
-
-	u64		ce_ate40_shadow[TIOCE_NUM_M40_ATES];
-	u64		ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
-	u32		ce_ate3240_pagesize;
-
-	u8			ce_port1_secondary;
-
-	/* per-port resources */
-	struct {
-		int 		dirmap_refcnt;
-		u64	dirmap_shadow;
-	} ce_port[TIOCE_NUM_PORTS];
-};
-
-struct tioce_dmamap {
-	struct list_head	ce_dmamap_list;	/* headed by tioce_kernel */
-	u32		refcnt;
-
-	u64		nbytes;		/* # bytes mapped */
-
-	u64		ct_start;	/* coretalk start address */
-	u64		pci_start;	/* bus start address */
-
-	u64		__iomem *ate_hw;/* hw ptr of first ate in map */
-	u64		*ate_shadow;	/* shadow ptr of firat ate */
-	u16		ate_count;	/* # ate's in the map */
-};
-
-extern int tioce_init_provider(void);
-
-#endif  /* __ASM_IA64_SN_CE_PROVIDER_H */
diff --git a/include/asm-ia64/sn/tiocp.h b/include/asm-ia64/sn/tiocp.h
deleted file mode 100644
index e8ad0bb5b6c5..000000000000
--- a/include/asm-ia64/sn/tiocp.h
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_TIOCP_H
-#define _ASM_IA64_SN_PCI_TIOCP_H
-
-#define TIOCP_HOST_INTR_ADDR            0x003FFFFFFFFFFFFFUL
-#define TIOCP_PCI64_CMDTYPE_MEM         (0x1ull << 60)
-#define TIOCP_PCI64_CMDTYPE_MSI         (0x3ull << 60)
-
-
-/*****************************************************************************
- *********************** TIOCP MMR structure mapping ***************************
- *****************************************************************************/
-
-struct tiocp{
-
-    /* 0x000000-0x00FFFF -- Local Registers */
-
-    /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */
-    u64		cp_id;				/* 0x000000 */
-    u64		cp_stat;			/* 0x000008 */
-    u64		cp_err_upper;			/* 0x000010 */
-    u64		cp_err_lower;			/* 0x000018 */
-    #define cp_err cp_err_lower
-    u64		cp_control;			/* 0x000020 */
-    u64		cp_req_timeout;			/* 0x000028 */
-    u64		cp_intr_upper;			/* 0x000030 */
-    u64		cp_intr_lower;			/* 0x000038 */
-    #define cp_intr cp_intr_lower
-    u64		cp_err_cmdword;			/* 0x000040 */
-    u64		_pad_000048;			/* 0x000048 */
-    u64		cp_tflush;			/* 0x000050 */
-
-    /* 0x000058-0x00007F -- Bridge-specific Configuration */
-    u64		cp_aux_err;			/* 0x000058 */
-    u64		cp_resp_upper;			/* 0x000060 */
-    u64		cp_resp_lower;			/* 0x000068 */
-    #define cp_resp cp_resp_lower
-    u64		cp_tst_pin_ctrl;		/* 0x000070 */
-    u64		cp_addr_lkerr;			/* 0x000078 */
-
-    /* 0x000080-0x00008F -- PMU & MAP */
-    u64		cp_dir_map;			/* 0x000080 */
-    u64		_pad_000088;			/* 0x000088 */
-
-    /* 0x000090-0x00009F -- SSRAM */
-    u64		cp_map_fault;			/* 0x000090 */
-    u64		_pad_000098;			/* 0x000098 */
-
-    /* 0x0000A0-0x0000AF -- Arbitration */
-    u64		cp_arb;				/* 0x0000A0 */
-    u64		_pad_0000A8;			/* 0x0000A8 */
-
-    /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
-    u64		cp_ate_parity_err;		/* 0x0000B0 */
-    u64		_pad_0000B8;			/* 0x0000B8 */
-
-    /* 0x0000C0-0x0000FF -- PCI/GIO */
-    u64		cp_bus_timeout;			/* 0x0000C0 */
-    u64		cp_pci_cfg;			/* 0x0000C8 */
-    u64		cp_pci_err_upper;		/* 0x0000D0 */
-    u64		cp_pci_err_lower;		/* 0x0000D8 */
-    #define cp_pci_err cp_pci_err_lower
-    u64		_pad_0000E0[4];			/* 0x0000{E0..F8} */
-
-    /* 0x000100-0x0001FF -- Interrupt */
-    u64		cp_int_status;			/* 0x000100 */
-    u64		cp_int_enable;			/* 0x000108 */
-    u64		cp_int_rst_stat;		/* 0x000110 */
-    u64		cp_int_mode;			/* 0x000118 */
-    u64		cp_int_device;			/* 0x000120 */
-    u64		cp_int_host_err;		/* 0x000128 */
-    u64		cp_int_addr[8];			/* 0x0001{30,,,68} */
-    u64		cp_err_int_view;		/* 0x000170 */
-    u64		cp_mult_int;			/* 0x000178 */
-    u64		cp_force_always[8];		/* 0x0001{80,,,B8} */
-    u64		cp_force_pin[8];		/* 0x0001{C0,,,F8} */
-
-    /* 0x000200-0x000298 -- Device */
-    u64		cp_device[4];			/* 0x0002{00,,,18} */
-    u64		_pad_000220[4];			/* 0x0002{20,,,38} */
-    u64		cp_wr_req_buf[4];		/* 0x0002{40,,,58} */
-    u64		_pad_000260[4];			/* 0x0002{60,,,78} */
-    u64		cp_rrb_map[2];			/* 0x0002{80,,,88} */
-    #define cp_even_resp cp_rrb_map[0]			/* 0x000280 */
-    #define cp_odd_resp  cp_rrb_map[1]			/* 0x000288 */
-    u64		cp_resp_status;			/* 0x000290 */
-    u64		cp_resp_clear;			/* 0x000298 */
-
-    u64		_pad_0002A0[12];		/* 0x0002{A0..F8} */
-
-    /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
-    struct {
-	u64	upper;				/* 0x0003{00,,,F0} */
-	u64	lower;				/* 0x0003{08,,,F8} */
-    } cp_buf_addr_match[16];
-
-    /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
-    struct {
-	u64	flush_w_touch;			/* 0x000{400,,,5C0} */
-	u64	flush_wo_touch;			/* 0x000{408,,,5C8} */
-	u64	inflight;			/* 0x000{410,,,5D0} */
-	u64	prefetch;			/* 0x000{418,,,5D8} */
-	u64	total_pci_retry;		/* 0x000{420,,,5E0} */
-	u64	max_pci_retry;			/* 0x000{428,,,5E8} */
-	u64	max_latency;			/* 0x000{430,,,5F0} */
-	u64	clear_all;			/* 0x000{438,,,5F8} */
-    } cp_buf_count[8];
-
-
-    /* 0x000600-0x0009FF -- PCI/X registers */
-    u64		cp_pcix_bus_err_addr;		/* 0x000600 */
-    u64		cp_pcix_bus_err_attr;		/* 0x000608 */
-    u64		cp_pcix_bus_err_data;		/* 0x000610 */
-    u64		cp_pcix_pio_split_addr;		/* 0x000618 */
-    u64		cp_pcix_pio_split_attr;		/* 0x000620 */
-    u64		cp_pcix_dma_req_err_attr;	/* 0x000628 */
-    u64		cp_pcix_dma_req_err_addr;	/* 0x000630 */
-    u64		cp_pcix_timeout;		/* 0x000638 */
-
-    u64		_pad_000640[24];		/* 0x000{640,,,6F8} */
-
-    /* 0x000700-0x000737 -- Debug Registers */
-    u64		cp_ct_debug_ctl;		/* 0x000700 */
-    u64		cp_br_debug_ctl;		/* 0x000708 */
-    u64		cp_mux3_debug_ctl;		/* 0x000710 */
-    u64		cp_mux4_debug_ctl;		/* 0x000718 */
-    u64		cp_mux5_debug_ctl;		/* 0x000720 */
-    u64		cp_mux6_debug_ctl;		/* 0x000728 */
-    u64		cp_mux7_debug_ctl;		/* 0x000730 */
-
-    u64		_pad_000738[89];		/* 0x000{738,,,9F8} */
-
-    /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
-    struct {
-	u64	cp_buf_addr;			/* 0x000{A00,,,AF0} */
-	u64	cp_buf_attr;			/* 0X000{A08,,,AF8} */
-    } cp_pcix_read_buf_64[16];
-
-    struct {
-	u64	cp_buf_addr;			/* 0x000{B00,,,BE0} */
-	u64	cp_buf_attr;			/* 0x000{B08,,,BE8} */
-	u64	cp_buf_valid;			/* 0x000{B10,,,BF0} */
-	u64	__pad1;				/* 0x000{B18,,,BF8} */
-    } cp_pcix_write_buf_64[8];
-
-    /* End of Local Registers -- Start of Address Map space */
-
-    char	_pad_000c00[0x010000 - 0x000c00];
-
-    /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */
-    u64		cp_int_ate_ram[1024];		/* 0x010000-0x011FF8 */
-
-    char	_pad_012000[0x14000 - 0x012000];
-
-    /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */
-    u64		cp_int_ate_ram_mp[1024];	/* 0x014000-0x015FF8 */
-
-    char	_pad_016000[0x18000 - 0x016000];
-
-    /* 0x18000-0x197F8 -- TIOCP Write Request Ram */
-    u64		cp_wr_req_lower[256];		/* 0x18000 - 0x187F8 */
-    u64		cp_wr_req_upper[256];		/* 0x18800 - 0x18FF8 */
-    u64		cp_wr_req_parity[256];		/* 0x19000 - 0x197F8 */
-
-    char	_pad_019800[0x1C000 - 0x019800];
-
-    /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */
-    u64		cp_rd_resp_lower[512];		/* 0x1C000 - 0x1CFF8 */
-    u64		cp_rd_resp_upper[512];		/* 0x1D000 - 0x1DFF8 */
-    u64		cp_rd_resp_parity[512];		/* 0x1E000 - 0x1EFF8 */
-
-    char	_pad_01F000[0x20000 - 0x01F000];
-
-    /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used)  */
-    char	_pad_020000[0x021000 - 0x20000];
-
-    /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */
-    union {
-	u8	c[0x1000 / 1];			/* 0x02{0000,,,7FFF} */
-	u16	s[0x1000 / 2];			/* 0x02{0000,,,7FFF} */
-	u32	l[0x1000 / 4];			/* 0x02{0000,,,7FFF} */
-	u64	d[0x1000 / 8];			/* 0x02{0000,,,7FFF} */
-	union {
-	    u8	c[0x100 / 1];
-	    u16	s[0x100 / 2];
-	    u32	l[0x100 / 4];
-	    u64	d[0x100 / 8];
-	} f[8];
-    } cp_type0_cfg_dev[7];				/* 0x02{1000,,,7FFF} */
-
-    /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
-    union {
-	u8	c[0x1000 / 1];			/* 0x028000-0x029000 */
-	u16	s[0x1000 / 2];			/* 0x028000-0x029000 */
-	u32	l[0x1000 / 4];			/* 0x028000-0x029000 */
-	u64	d[0x1000 / 8];			/* 0x028000-0x029000 */
-	union {
-	    u8	c[0x100 / 1];
-	    u16	s[0x100 / 2];
-	    u32	l[0x100 / 4];
-	    u64	d[0x100 / 8];
-	} f[8];
-    } cp_type1_cfg;					/* 0x028000-0x029000 */
-
-    char		_pad_029000[0x030000-0x029000];
-
-    /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
-    union {
-	u8	c[8 / 1];
-	u16	s[8 / 2];
-	u32	l[8 / 4];
-	u64	d[8 / 8];
-    } cp_pci_iack;					/* 0x030000-0x030007 */
-
-    char		_pad_030007[0x040000-0x030008];
-
-    /* 0x040000-0x040007 -- PCIX Special Cycle */
-    union {
-	u8	c[8 / 1];
-	u16	s[8 / 2];
-	u32	l[8 / 4];
-	u64	d[8 / 8];
-    } cp_pcix_cycle;					/* 0x040000-0x040007 */
-
-    char		_pad_040007[0x200000-0x040008];
-
-    /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */
-    union {
-	u8	c[0x100000 / 1];
-	u16	s[0x100000 / 2];
-	u32	l[0x100000 / 4];
-	u64	d[0x100000 / 8];
-    } cp_devio_raw[6];					/* 0x200000-0x7FFFFF */
-
-    #define cp_devio(n)  cp_devio_raw[((n)<2)?(n*2):(n+2)]
-
-    char		_pad_800000[0xA00000-0x800000];
-
-    /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush  */
-    union {
-	u8	c[0x100000 / 1];
-	u16	s[0x100000 / 2];
-	u32	l[0x100000 / 4];
-	u64	d[0x100000 / 8];
-    } cp_devio_raw_flush[6];				/* 0xA00000-0xBFFFFF */
-
-    #define cp_devio_flush(n)  cp_devio_raw_flush[((n)<2)?(n*2):(n+2)]
-
-};
-
-#endif 	/* _ASM_IA64_SN_PCI_TIOCP_H */
diff --git a/include/asm-ia64/sn/tiocx.h b/include/asm-ia64/sn/tiocx.h
deleted file mode 100644
index d29728492f36..000000000000
--- a/include/asm-ia64/sn/tiocx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_TIO_TIOCX_H
-#define _ASM_IA64_SN_TIO_TIOCX_H
-
-#ifdef __KERNEL__
-
-struct cx_id_s {
-	unsigned int part_num;
-	unsigned int mfg_num;
-	int nasid;
-};
-
-struct cx_dev {
-	struct cx_id_s cx_id;
-	int bt;				/* board/blade type */
-	void *soft;			/* driver specific */
-	struct hubdev_info *hubdev;
-	struct device dev;
-	struct cx_drv *driver;
-};
-
-struct cx_device_id {
-	unsigned int part_num;
-	unsigned int mfg_num;
-};
-
-struct cx_drv {
-	char *name;
-	const struct cx_device_id *id_table;
-	struct device_driver driver;
-	int (*probe) (struct cx_dev * dev, const struct cx_device_id * id);
-	int (*remove) (struct cx_dev * dev);
-};
-
-/* create DMA address by stripping AS bits */
-#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL)
-
-#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) |  \
-                                  ((((u64)(a)) & 0xffffc000000000UL) <<2))
-
-#define TIO_CE_ASIC_PARTNUM 0xce00
-#define TIOCX_CORELET 3
-
-/* These are taken from tio_mmr_as.h */
-#define TIO_ICE_FRZ_CFG               TIO_MMR_ADDR_MOD(0x00000000b0008100UL)
-#define TIO_ICE_PMI_TX_CFG            TIO_MMR_ADDR_MOD(0x00000000b000b100UL)
-#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL)
-#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL
-
-#define to_cx_dev(n) container_of(n, struct cx_dev, dev)
-#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver)
-
-extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
-extern void tiocx_irq_free(struct sn_irq_info *);
-extern int cx_device_unregister(struct cx_dev *);
-extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
-extern int cx_driver_unregister(struct cx_drv *);
-extern int cx_driver_register(struct cx_drv *);
-extern u64 tiocx_dma_addr(u64 addr);
-extern u64 tiocx_swin_base(int nasid);
-extern void tiocx_mmr_store(int nasid, u64 offset, u64 value);
-extern u64 tiocx_mmr_load(int nasid, u64 offset);
-
-#endif				//  __KERNEL__
-#endif				// _ASM_IA64_SN_TIO_TIOCX__
diff --git a/include/asm-ia64/sn/types.h b/include/asm-ia64/sn/types.h
deleted file mode 100644
index 8e04ee211e59..000000000000
--- a/include/asm-ia64/sn/types.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc.  All Rights Reserved.
- * Copyright (C) 1999 by Ralf Baechle
- */
-#ifndef _ASM_IA64_SN_TYPES_H
-#define _ASM_IA64_SN_TYPES_H
-
-#include <linux/types.h>
-
-typedef unsigned long 	cpuid_t;
-typedef signed short	nasid_t;	/* node id in numa-as-id space */
-typedef signed char	partid_t;	/* partition ID type */
-typedef unsigned int    moduleid_t;     /* user-visible module number type */
-typedef unsigned int    cmoduleid_t;    /* kernel compact module id type */
-typedef unsigned char	slotid_t;	/* slot (blade) within module */
-typedef unsigned char	slabid_t;	/* slab (asic) within slot */
-typedef u64 nic_t;
-typedef unsigned long iopaddr_t;
-typedef unsigned long paddr_t;
-typedef short cnodeid_t;
-
-#endif /* _ASM_IA64_SN_TYPES_H */
diff --git a/include/asm-ia64/socket.h b/include/asm-ia64/socket.h
deleted file mode 100644
index d5ef0aa3e312..000000000000
--- a/include/asm-ia64/socket.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _ASM_IA64_SOCKET_H
-#define _ASM_IA64_SOCKET_H
-
-/*
- * Socket related defines.
- *
- * Based on <asm-i386/socket.h>.
- *
- * Modified 1998-2000
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE		25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC             31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* _ASM_IA64_SOCKET_H */
diff --git a/include/asm-ia64/sockios.h b/include/asm-ia64/sockios.h
deleted file mode 100644
index 15c92468ad38..000000000000
--- a/include/asm-ia64/sockios.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_IA64_SOCKIOS_H
-#define _ASM_IA64_SOCKIOS_H
-
-/*
- * Socket-level I/O control calls.
- *
- * Based on <asm-i386/sockios.h>.
- *
- * Modified 1998, 1999
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* _ASM_IA64_SOCKIOS_H */
diff --git a/include/asm-ia64/sparsemem.h b/include/asm-ia64/sparsemem.h
deleted file mode 100644
index 67a7c40ec27f..000000000000
--- a/include/asm-ia64/sparsemem.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_IA64_SPARSEMEM_H
-#define _ASM_IA64_SPARSEMEM_H
-
-#ifdef CONFIG_SPARSEMEM
-/*
- * SECTION_SIZE_BITS            2^N: how big each section will be
- * MAX_PHYSMEM_BITS             2^N: how much memory we can have in that space
- */
-
-#define SECTION_SIZE_BITS	(30)
-#define MAX_PHYSMEM_BITS	(50)
-#ifdef CONFIG_FORCE_MAX_ZONEORDER
-#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
-#undef SECTION_SIZE_BITS
-#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
-#endif
-#endif
-
-#endif /* CONFIG_SPARSEMEM */
-#endif /* _ASM_IA64_SPARSEMEM_H */
diff --git a/include/asm-ia64/spinlock.h b/include/asm-ia64/spinlock.h
deleted file mode 100644
index 0229fb95fb38..000000000000
--- a/include/asm-ia64/spinlock.h
+++ /dev/null
@@ -1,220 +0,0 @@
-#ifndef _ASM_IA64_SPINLOCK_H
-#define _ASM_IA64_SPINLOCK_H
-
-/*
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- *
- * This file is used for SMP configurations only.
- */
-
-#include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/intrinsics.h>
-#include <asm/system.h>
-
-#define __raw_spin_lock_init(x)			((x)->lock = 0)
-
-#ifdef ASM_SUPPORTED
-/*
- * Try to get the lock.  If we fail to get the lock, make a non-standard call to
- * ia64_spinlock_contention().  We do not use a normal call because that would force all
- * callers of __raw_spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
- * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered".
- */
-
-#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
-
-static inline void
-__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags)
-{
-	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
-
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) br.cond.spnt.many b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#else
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	/* mis-declare, so we get the entry-point, not it's function descriptor: */
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "(p14) br.call.spnt.many b6 = b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#endif
-}
-
-#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
-
-/* Unlock by doing an ordered store and releasing the cacheline with nta */
-static inline void __raw_spin_unlock(raw_spinlock_t *x) {
-	barrier();
-	asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x));
-}
-
-#else /* !ASM_SUPPORTED */
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-# define __raw_spin_lock(x)								\
-do {											\
-	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
-	__u64 ia64_spinlock_val;							\
-	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
-	if (unlikely(ia64_spinlock_val)) {						\
-		do {									\
-			while (*ia64_spinlock_ptr)					\
-				ia64_barrier();						\
-			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
-		} while (ia64_spinlock_val);						\
-	}										\
-} while (0)
-#define __raw_spin_unlock(x)	do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0)
-#endif /* !ASM_SUPPORTED */
-
-#define __raw_spin_is_locked(x)		((x)->lock != 0)
-#define __raw_spin_trylock(x)		(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
-
-#define __raw_read_can_lock(rw)		(*(volatile int *)(rw) >= 0)
-#define __raw_write_can_lock(rw)	(*(volatile int *)(rw) == 0)
-
-#define __raw_read_lock(rw)								\
-do {											\
-	raw_rwlock_t *__read_lock_ptr = (rw);						\
-											\
-	while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) {		\
-		ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);			\
-		while (*(volatile int *)__read_lock_ptr < 0)				\
-			cpu_relax();							\
-	}										\
-} while (0)
-
-#define __raw_read_unlock(rw)					\
-do {								\
-	raw_rwlock_t *__read_lock_ptr = (rw);			\
-	ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);	\
-} while (0)
-
-#ifdef ASM_SUPPORTED
-#define __raw_write_lock(rw)							\
-do {										\
- 	__asm__ __volatile__ (							\
-		"mov ar.ccv = r0\n"						\
-		"dep r29 = -1, r0, 31, 1;;\n"					\
-		"1:\n"								\
-		"ld4 r2 = [%0];;\n"						\
-		"cmp4.eq p0,p7 = r0,r2\n"					\
-		"(p7) br.cond.spnt.few 1b \n"					\
-		"cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n"			\
-		"cmp4.eq p0,p7 = r0, r2\n"					\
-		"(p7) br.cond.spnt.few 1b;;\n"					\
-		:: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory");		\
-} while(0)
-
-#define __raw_write_trylock(rw)							\
-({										\
-	register long result;							\
-										\
-	__asm__ __volatile__ (							\
-		"mov ar.ccv = r0\n"						\
-		"dep r29 = -1, r0, 31, 1;;\n"					\
-		"cmpxchg4.acq %0 = [%1], r29, ar.ccv\n"				\
-		: "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory");		\
-	(result == 0);								\
-})
-
-static inline void __raw_write_unlock(raw_rwlock_t *x)
-{
-	u8 *y = (u8 *)x;
-	barrier();
-	asm volatile ("st1.rel.nta [%0] = r0\n\t" :: "r"(y+3) : "memory" );
-}
-
-#else /* !ASM_SUPPORTED */
-
-#define __raw_write_lock(l)								\
-({											\
-	__u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1);			\
-	__u32 *ia64_write_lock_ptr = (__u32 *) (l);					\
-	do {										\
-		while (*ia64_write_lock_ptr)						\
-			ia64_barrier();							\
-		ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0);	\
-	} while (ia64_val);								\
-})
-
-#define __raw_write_trylock(rw)						\
-({									\
-	__u64 ia64_val;							\
-	__u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1);			\
-	ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0);	\
-	(ia64_val == 0);						\
-})
-
-static inline void __raw_write_unlock(raw_rwlock_t *x)
-{
-	barrier();
-	x->write_lock = 0;
-}
-
-#endif /* !ASM_SUPPORTED */
-
-static inline int __raw_read_trylock(raw_rwlock_t *x)
-{
-	union {
-		raw_rwlock_t lock;
-		__u32 word;
-	} old, new;
-	old.lock = new.lock = *x;
-	old.lock.write_lock = new.lock.write_lock = 0;
-	++new.lock.read_counter;
-	return (u32)ia64_cmpxchg4_acq((__u32 *)(x), new.word, old.word) == old.word;
-}
-
-#define _raw_spin_relax(lock)	cpu_relax()
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
-
-#endif /*  _ASM_IA64_SPINLOCK_H */
diff --git a/include/asm-ia64/spinlock_types.h b/include/asm-ia64/spinlock_types.h
deleted file mode 100644
index 474e46f1ab4a..000000000000
--- a/include/asm-ia64/spinlock_types.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_IA64_SPINLOCK_TYPES_H
-#define _ASM_IA64_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile unsigned int read_counter	: 31;
-	volatile unsigned int write_lock	:  1;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED		{ 0, 0 }
-
-#endif
diff --git a/include/asm-ia64/stat.h b/include/asm-ia64/stat.h
deleted file mode 100644
index 367bb90cdffa..000000000000
--- a/include/asm-ia64/stat.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_IA64_STAT_H
-#define _ASM_IA64_STAT_H
-
-/*
- * Modified 1998, 1999
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-struct stat {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned long	st_nlink;
-	unsigned int	st_mode;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned int	__pad0;
-	unsigned long	st_rdev;
-	unsigned long	st_size;
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-	unsigned long	st_blksize;
-	long		st_blocks;
-	unsigned long	__unused[3];
-};
-
-#define STAT_HAVE_NSEC 1
-
-struct ia64_oldstat {
-	unsigned int	st_dev;
-	unsigned int	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned int	st_rdev;
-	unsigned int	__pad1;
-	unsigned long	st_size;
-	unsigned long	st_atime;
-	unsigned long	st_mtime;
-	unsigned long	st_ctime;
-	unsigned int	st_blksize;
-	int		st_blocks;
-	unsigned int	__unused1;
-	unsigned int	__unused2;
-};
-
-#endif /* _ASM_IA64_STAT_H */
diff --git a/include/asm-ia64/statfs.h b/include/asm-ia64/statfs.h
deleted file mode 100644
index 811097974f31..000000000000
--- a/include/asm-ia64/statfs.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _ASM_IA64_STATFS_H
-#define _ASM_IA64_STATFS_H
-
-/*
- * Based on <asm-i386/statfs.h>.
- *
- * Modified 1998, 1999, 2003
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#ifndef __KERNEL_STRICT_NAMES
-# include <linux/types.h>
-typedef __kernel_fsid_t	fsid_t;
-#endif
-
-/*
- * This is ugly --- we're already 64-bit, so just duplicate the definitions
- */
-struct statfs {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-
-struct statfs64 {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct compat_statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-} __attribute__((packed));
-
-#endif /* _ASM_IA64_STATFS_H */
diff --git a/include/asm-ia64/string.h b/include/asm-ia64/string.h
deleted file mode 100644
index 85fd65c52a8c..000000000000
--- a/include/asm-ia64/string.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_IA64_STRING_H
-#define _ASM_IA64_STRING_H
-
-/*
- * Here is where we want to put optimized versions of the string
- * routines.
- *
- * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-
-#define __HAVE_ARCH_STRLEN	1 /* see arch/ia64/lib/strlen.S */
-#define __HAVE_ARCH_MEMSET	1 /* see arch/ia64/lib/memset.S */
-#define __HAVE_ARCH_MEMCPY	1 /* see arch/ia64/lib/memcpy.S */
-
-extern __kernel_size_t strlen (const char *);
-extern void *memcpy (void *, const void *, __kernel_size_t);
-extern void *memset (void *, int, __kernel_size_t);
-
-#endif /* _ASM_IA64_STRING_H */
diff --git a/include/asm-ia64/suspend.h b/include/asm-ia64/suspend.h
deleted file mode 100644
index b05bbb6074e2..000000000000
--- a/include/asm-ia64/suspend.h
+++ /dev/null
@@ -1 +0,0 @@
-/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h
deleted file mode 100644
index 26e250bfb912..000000000000
--- a/include/asm-ia64/system.h
+++ /dev/null
@@ -1,285 +0,0 @@
-#ifndef _ASM_IA64_SYSTEM_H
-#define _ASM_IA64_SYSTEM_H
-
-/*
- * System defines. Note that this is included both from .c and .S
- * files, so it does only defines, not any C code.  This is based
- * on information published in the Processor Abstraction Layer
- * and the System Abstraction Layer manual.
- *
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
- */
-
-#include <asm/kregs.h>
-#include <asm/page.h>
-#include <asm/pal.h>
-#include <asm/percpu.h>
-
-#define GATE_ADDR		RGN_BASE(RGN_GATE)
-
-/*
- * 0xa000000000000000+2*PERCPU_PAGE_SIZE
- * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
- */
-#define KERNEL_START		 (GATE_ADDR+__IA64_UL_CONST(0x100000000))
-#define PERCPU_ADDR		(-PERCPU_PAGE_SIZE)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
-
-struct pci_vector_struct {
-	__u16 segment;	/* PCI Segment number */
-	__u16 bus;	/* PCI Bus number */
-	__u32 pci_id;	/* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
-	__u8 pin;	/* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
-	__u32 irq;	/* IRQ assigned */
-};
-
-extern struct ia64_boot_param {
-	__u64 command_line;		/* physical address of command line arguments */
-	__u64 efi_systab;		/* physical address of EFI system table */
-	__u64 efi_memmap;		/* physical address of EFI memory map */
-	__u64 efi_memmap_size;		/* size of EFI memory map */
-	__u64 efi_memdesc_size;		/* size of an EFI memory map descriptor */
-	__u32 efi_memdesc_version;	/* memory descriptor version */
-	struct {
-		__u16 num_cols;	/* number of columns on console output device */
-		__u16 num_rows;	/* number of rows on console output device */
-		__u16 orig_x;	/* cursor's x position */
-		__u16 orig_y;	/* cursor's y position */
-	} console_info;
-	__u64 fpswa;		/* physical address of the fpswa interface */
-	__u64 initrd_start;
-	__u64 initrd_size;
-} *ia64_boot_param;
-
-/*
- * Macros to force memory ordering.  In these descriptions, "previous"
- * and "subsequent" refer to program order; "visible" means that all
- * architecturally visible effects of a memory access have occurred
- * (at a minimum, this means the memory has been read or written).
- *
- *   wmb():	Guarantees that all preceding stores to memory-
- *		like regions are visible before any subsequent
- *		stores and that all following stores will be
- *		visible only after all previous stores.
- *   rmb():	Like wmb(), but for reads.
- *   mb():	wmb()/rmb() combo, i.e., all previous memory
- *		accesses are visible before all subsequent
- *		accesses and vice versa.  This is also known as
- *		a "fence."
- *
- * Note: "mb()" and its variants cannot be used as a fence to order
- * accesses to memory mapped I/O registers.  For that, mf.a needs to
- * be used.  However, we don't want to always use mf.a because (a)
- * it's (presumably) much slower than mf and (b) mf.a is supported for
- * sequential memory pages only.
- */
-#define mb()	ia64_mf()
-#define rmb()	mb()
-#define wmb()	mb()
-#define read_barrier_depends()	do { } while(0)
-
-#ifdef CONFIG_SMP
-# define smp_mb()	mb()
-# define smp_rmb()	rmb()
-# define smp_wmb()	wmb()
-# define smp_read_barrier_depends()	read_barrier_depends()
-#else
-# define smp_mb()	barrier()
-# define smp_rmb()	barrier()
-# define smp_wmb()	barrier()
-# define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-/*
- * XXX check on this ---I suspect what Linus really wants here is
- * acquire vs release semantics but we can't discuss this stuff with
- * Linus just yet.  Grrr...
- */
-#define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
-
-#define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
-
-/*
- * The group barrier in front of the rsm & ssm are necessary to ensure
- * that none of the previous instructions in the same group are
- * affected by the rsm/ssm.
- */
-/* For spinlocks etc */
-
-/*
- * - clearing psr.i is implicitly serialized (visible by next insn)
- * - setting psr.i requires data serialization
- * - we need a stop-bit before reading PSR because we sometimes
- *   write a floating-point register right before reading the PSR
- *   and that writes to PSR.mfl
- */
-#define __local_irq_save(x)			\
-do {						\
-	ia64_stop();				\
-	(x) = ia64_getreg(_IA64_REG_PSR);	\
-	ia64_stop();				\
-	ia64_rsm(IA64_PSR_I);			\
-} while (0)
-
-#define __local_irq_disable()			\
-do {						\
-	ia64_stop();				\
-	ia64_rsm(IA64_PSR_I);			\
-} while (0)
-
-#define __local_irq_restore(x)	ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
-
-#ifdef CONFIG_IA64_DEBUG_IRQ
-
-  extern unsigned long last_cli_ip;
-
-# define __save_ip()		last_cli_ip = ia64_getreg(_IA64_REG_IP)
-
-# define local_irq_save(x)					\
-do {								\
-	unsigned long __psr;					\
-								\
-	__local_irq_save(__psr);				\
-	if (__psr & IA64_PSR_I)					\
-		__save_ip();					\
-	(x) = __psr;						\
-} while (0)
-
-# define local_irq_disable()	do { unsigned long __x; local_irq_save(__x); } while (0)
-
-# define local_irq_restore(x)					\
-do {								\
-	unsigned long __old_psr, __psr = (x);			\
-								\
-	local_save_flags(__old_psr);				\
-	__local_irq_restore(__psr);				\
-	if ((__old_psr & IA64_PSR_I) && !(__psr & IA64_PSR_I))	\
-		__save_ip();					\
-} while (0)
-
-#else /* !CONFIG_IA64_DEBUG_IRQ */
-# define local_irq_save(x)	__local_irq_save(x)
-# define local_irq_disable()	__local_irq_disable()
-# define local_irq_restore(x)	__local_irq_restore(x)
-#endif /* !CONFIG_IA64_DEBUG_IRQ */
-
-#define local_irq_enable()	({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
-#define local_save_flags(flags)	({ ia64_stop(); (flags) = ia64_getreg(_IA64_REG_PSR); })
-
-#define irqs_disabled()				\
-({						\
-	unsigned long __ia64_id_flags;		\
-	local_save_flags(__ia64_id_flags);	\
-	(__ia64_id_flags & IA64_PSR_I) == 0;	\
-})
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_IA32_SUPPORT
-# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
-#else
-# define IS_IA32_PROCESS(regs)		0
-struct task_struct;
-static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
-static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
-#endif
-
-/*
- * Context switch from one thread to another.  If the two threads have
- * different address spaces, schedule() has already taken care of
- * switching to the new address space by calling switch_mm().
- *
- * Disabling access to the fph partition and the debug-register
- * context switch MUST be done before calling ia64_switch_to() since a
- * newly created thread returns directly to
- * ia64_ret_from_syscall_clear_r8.
- */
-extern struct task_struct *ia64_switch_to (void *next_task);
-
-struct task_struct;
-
-extern void ia64_save_extra (struct task_struct *task);
-extern void ia64_load_extra (struct task_struct *task);
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
-# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
-#else
-# define IA64_ACCOUNT_ON_SWITCH(p,n)
-#endif
-
-#ifdef CONFIG_PERFMON
-  DECLARE_PER_CPU(unsigned long, pfm_syst_info);
-# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
-#else
-# define PERFMON_IS_SYSWIDE() (0)
-#endif
-
-#define IA64_HAS_EXTRA_STATE(t)							\
-	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
-	 || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
-
-#define __switch_to(prev,next,last) do {							 \
-	IA64_ACCOUNT_ON_SWITCH(prev, next);							 \
-	if (IA64_HAS_EXTRA_STATE(prev))								 \
-		ia64_save_extra(prev);								 \
-	if (IA64_HAS_EXTRA_STATE(next))								 \
-		ia64_load_extra(next);								 \
-	ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next);			 \
-	(last) = ia64_switch_to((next));							 \
-} while (0)
-
-#ifdef CONFIG_SMP
-/*
- * In the SMP case, we save the fph state when context-switching away from a thread that
- * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
- * pick up the state from task->thread.fph, avoiding the complication of having to fetch
- * the latest fph state from another CPU.  In other words: eager save, lazy restore.
- */
-# define switch_to(prev,next,last) do {						\
-	if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {				\
-		ia64_psr(task_pt_regs(prev))->mfh = 0;			\
-		(prev)->thread.flags |= IA64_THREAD_FPH_VALID;			\
-		__ia64_save_fpu((prev)->thread.fph);				\
-	}									\
-	__switch_to(prev, next, last);						\
-	/* "next" in old context is "current" in new context */			\
-	if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) &&	       \
-		     (task_cpu(current) !=				       \
-		      		      task_thread_info(current)->last_cpu))) { \
-		platform_migrate(current);				       \
-		task_thread_info(current)->last_cpu = task_cpu(current);       \
-	}								       \
-} while (0)
-#else
-# define switch_to(prev,next,last)	__switch_to(prev, next, last)
-#endif
-
-#define __ARCH_WANT_UNLOCKED_CTXSW
-#define ARCH_HAS_PREFETCH_SWITCH_STACK
-#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
-
-void cpu_idle_wait(void);
-
-#define arch_align_stack(x) (x)
-
-void default_idle(void);
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_system_vtime(struct task_struct *);
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_IA64_SYSTEM_H */
diff --git a/include/asm-ia64/termbits.h b/include/asm-ia64/termbits.h
deleted file mode 100644
index 9f162e0089ad..000000000000
--- a/include/asm-ia64/termbits.h
+++ /dev/null
@@ -1,207 +0,0 @@
-#ifndef _ASM_IA64_TERMBITS_H
-#define _ASM_IA64_TERMBITS_H
-
-/*
- * Based on <asm-i386/termbits.h>.
- *
- * Modified 1999
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- *
- * 99/01/28	Added new baudrates
- */
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* _ASM_IA64_TERMBITS_H */
diff --git a/include/asm-ia64/termios.h b/include/asm-ia64/termios.h
deleted file mode 100644
index 689d218c0c28..000000000000
--- a/include/asm-ia64/termios.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _ASM_IA64_TERMIOS_H
-#define _ASM_IA64_TERMIOS_H
-
-/*
- * Modified 1999
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- *
- * 99/01/28	Added N_IRDA and N_SMSBLOCK
- */
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-# ifdef __KERNEL__
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) {	\
-	unsigned short __tmp;				\
-	get_user(__tmp,&(termio)->x);			\
-	*(unsigned short *) &(termios)->x = __tmp;	\
-}
-
-#define user_termio_to_kernel_termios(termios, termio)		\
-({								\
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);		\
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);		\
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);		\
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);		\
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC);	\
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios)		\
-({								\
-	put_user((termios)->c_iflag, &(termio)->c_iflag);	\
-	put_user((termios)->c_oflag, &(termio)->c_oflag);	\
-	put_user((termios)->c_cflag, &(termio)->c_cflag);	\
-	put_user((termios)->c_lflag, &(termio)->c_lflag);	\
-	put_user((termios)->c_line,  &(termio)->c_line);	\
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);	\
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-# endif /* __KERNEL__ */
-
-#endif /* _ASM_IA64_TERMIOS_H */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
deleted file mode 100644
index 2422ac61658a..000000000000
--- a/include/asm-ia64/thread_info.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-#ifndef _ASM_IA64_THREAD_INFO_H
-#define _ASM_IA64_THREAD_INFO_H
-
-#ifndef ASM_OFFSETS_C
-#include <asm/asm-offsets.h>
-#endif
-#include <asm/processor.h>
-#include <asm/ptrace.h>
-
-#define PREEMPT_ACTIVE_BIT 30
-#define PREEMPT_ACTIVE	(1 << PREEMPT_ACTIVE_BIT)
-
-#ifndef __ASSEMBLY__
-
-/*
- * On IA-64, we want to keep the task structure and kernel stack together, so they can be
- * mapped by a single TLB entry and so they can be addressed by the "current" pointer
- * without having to do pointer masking.
- */
-struct thread_info {
-	struct task_struct *task;	/* XXX not really needed, except for dup_task_struct() */
-	struct exec_domain *exec_domain;/* execution domain */
-	__u32 flags;			/* thread_info flags (see TIF_*) */
-	__u32 cpu;			/* current CPU */
-	__u32 last_cpu;			/* Last CPU thread ran on */
-	__u32 status;			/* Thread synchronous flags */
-	mm_segment_t addr_limit;	/* user-level address space limit */
-	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
-	struct restart_block restart_block;
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-	__u64 ac_stamp;
-	__u64 ac_leave;
-	__u64 ac_stime;
-	__u64 ac_utime;
-#endif
-};
-
-#define THREAD_SIZE			KERNEL_STACK_SIZE
-
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 0,			\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#ifndef ASM_OFFSETS_C
-/* how to get the thread information struct from C */
-#define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
-#define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
-#define task_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
-#else
-#define current_thread_info()	((struct thread_info *) 0)
-#define alloc_thread_info(tsk)	((struct thread_info *) 0)
-#define task_thread_info(tsk)	((struct thread_info *) 0)
-#endif
-#define free_thread_info(ti)	/* nothing */
-#define task_stack_page(tsk)	((void *)(tsk))
-
-#define __HAVE_THREAD_FUNCTIONS
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-#define setup_thread_stack(p, org)			\
-	*task_thread_info(p) = *task_thread_info(org);	\
-	task_thread_info(p)->ac_stime = 0;		\
-	task_thread_info(p)->ac_utime = 0;		\
-	task_thread_info(p)->task = (p);
-#else
-#define setup_thread_stack(p, org) \
-	*task_thread_info(p) = *task_thread_info(org); \
-	task_thread_info(p)->task = (p);
-#endif
-#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET)
-
-#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
-#define alloc_task_struct()	((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
-#define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
-
-#define tsk_set_notify_resume(tsk) \
-	set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME)
-extern void tsk_clear_notify_resume(struct task_struct *tsk);
-#endif /* !__ASSEMBLY */
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in least-significant 16 bits, other flags
- *   in top 16 bits
- */
-#define TIF_SIGPENDING		0	/* signal pending */
-#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
-#define TIF_SYSCALL_TRACE	2	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
-#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
-#define TIF_NOTIFY_RESUME	6	/* resumption notification requested */
-#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17
-#define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
-#define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
-#define TIF_FREEZE		20	/* is freezing for suspend */
-#define TIF_RESTORE_RSE		21	/* user RBS is newer than kernel RBS */
-
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_SYSCALL_TRACEAUDIT	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_MCA_INIT		(1 << TIF_MCA_INIT)
-#define _TIF_DB_DISABLED	(1 << TIF_DB_DISABLED)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
-#define _TIF_RESTORE_RSE	(1 << TIF_RESTORE_RSE)
-
-/* "work to do on user-return" bits */
-#define TIF_ALLWORK_MASK	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\
-				 _TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE)
-/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
-#define TIF_WORK_MASK		(TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
-
-#define TS_POLLING		1 	/* true if in idle loop and not sleeping */
-#define TS_RESTORE_SIGMASK	2	/* restore signal mask in do_signal() */
-
-#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK	1
-static inline void set_restore_sigmask(void)
-{
-	struct thread_info *ti = current_thread_info();
-	ti->status |= TS_RESTORE_SIGMASK;
-	set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif	/* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/timex.h b/include/asm-ia64/timex.h
deleted file mode 100644
index 05a6baf8a472..000000000000
--- a/include/asm-ia64/timex.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASM_IA64_TIMEX_H
-#define _ASM_IA64_TIMEX_H
-
-/*
- * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-/*
- * 2001/01/18 davidm	Removed CLOCK_TICK_RATE.  It makes no sense on IA-64.
- *			Also removed cacheflush_time as it's entirely unused.
- */
-
-#include <asm/intrinsics.h>
-#include <asm/processor.h>
-
-typedef unsigned long cycles_t;
-
-extern void (*ia64_udelay)(unsigned long usecs);
-
-/*
- * For performance reasons, we don't want to define CLOCK_TICK_TRATE as
- * local_cpu_data->itc_rate.  Fortunately, we don't have to, either: according to George
- * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock.  The time
- * calculation assumes that you will use enough of these so that your tick size <= 1/HZ.
- * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks,
- * the actual value is calculated and used to update the wall clock each jiffie.  Setting
- * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors.  Hence we
- * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about
- * 100MHz.
- */
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
-
-static inline cycles_t
-get_cycles (void)
-{
-	cycles_t ret;
-
-	ret = ia64_getreg(_IA64_REG_AR_ITC);
-	return ret;
-}
-
-#endif /* _ASM_IA64_TIMEX_H */
diff --git a/include/asm-ia64/tlb.h b/include/asm-ia64/tlb.h
deleted file mode 100644
index 20d8a39680c2..000000000000
--- a/include/asm-ia64/tlb.h
+++ /dev/null
@@ -1,257 +0,0 @@
-#ifndef _ASM_IA64_TLB_H
-#define _ASM_IA64_TLB_H
-/*
- * Based on <asm-generic/tlb.h>.
- *
- * Copyright (C) 2002-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-/*
- * Removing a translation from a page table (including TLB-shootdown) is a four-step
- * procedure:
- *
- *	(1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory
- *	    (this is a no-op on ia64).
- *	(2) Clear the relevant portions of the page-table
- *	(3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs
- *	(4) Release the pages that were freed up in step (2).
- *
- * Note that the ordering of these steps is crucial to avoid races on MP machines.
- *
- * The Linux kernel defines several platform-specific hooks for TLB-shootdown.  When
- * unmapping a portion of the virtual address space, these hooks are called according to
- * the following template:
- *
- *	tlb <- tlb_gather_mmu(mm, full_mm_flush);	// start unmap for address space MM
- *	{
- *	  for each vma that needs a shootdown do {
- *	    tlb_start_vma(tlb, vma);
- *	      for each page-table-entry PTE that needs to be removed do {
- *		tlb_remove_tlb_entry(tlb, pte, address);
- *		if (pte refers to a normal page) {
- *		  tlb_remove_page(tlb, page);
- *		}
- *	      }
- *	    tlb_end_vma(tlb, vma);
- *	  }
- *	}
- *	tlb_finish_mmu(tlb, start, end);	// finish unmap for address space MM
- */
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/swap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/processor.h>
-#include <asm/tlbflush.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_SMP
-# define FREE_PTE_NR		2048
-# define tlb_fast_mode(tlb)	((tlb)->nr == ~0U)
-#else
-# define FREE_PTE_NR		0
-# define tlb_fast_mode(tlb)	(1)
-#endif
-
-struct mmu_gather {
-	struct mm_struct	*mm;
-	unsigned int		nr;		/* == ~0U => fast mode */
-	unsigned char		fullmm;		/* non-zero means full mm flush */
-	unsigned char		need_flush;	/* really unmapped some PTEs? */
-	unsigned long		start_addr;
-	unsigned long		end_addr;
-	struct page 		*pages[FREE_PTE_NR];
-};
-
-struct ia64_tr_entry {
-	u64 ifa;
-	u64 itir;
-	u64 pte;
-	u64 rr;
-}; /*Record for tr entry!*/
-
-extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size);
-extern void ia64_ptr_entry(u64 target_mask, int slot);
-
-extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
-
-/*
- region register macros
-*/
-#define RR_TO_VE(val)   (((val) >> 0) & 0x0000000000000001)
-#define RR_VE(val)	(((val) & 0x0000000000000001) << 0)
-#define RR_VE_MASK	0x0000000000000001L
-#define RR_VE_SHIFT	0
-#define RR_TO_PS(val)	(((val) >> 2) & 0x000000000000003f)
-#define RR_PS(val)	(((val) & 0x000000000000003f) << 2)
-#define RR_PS_MASK	0x00000000000000fcL
-#define RR_PS_SHIFT	2
-#define RR_RID_MASK	0x00000000ffffff00L
-#define RR_TO_RID(val) 	((val >> 8) & 0xffffff)
-
-/* Users of the generic TLB shootdown code must declare this storage space. */
-DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-/*
- * Flush the TLB for address range START to END and, if not in fast mode, release the
- * freed pages that where gathered up to this point.
- */
-static inline void
-ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
-{
-	unsigned int nr;
-
-	if (!tlb->need_flush)
-		return;
-	tlb->need_flush = 0;
-
-	if (tlb->fullmm) {
-		/*
-		 * Tearing down the entire address space.  This happens both as a result
-		 * of exit() and execve().  The latter case necessitates the call to
-		 * flush_tlb_mm() here.
-		 */
-		flush_tlb_mm(tlb->mm);
-	} else if (unlikely (end - start >= 1024*1024*1024*1024UL
-			     || REGION_NUMBER(start) != REGION_NUMBER(end - 1)))
-	{
-		/*
-		 * If we flush more than a tera-byte or across regions, we're probably
-		 * better off just flushing the entire TLB(s).  This should be very rare
-		 * and is not worth optimizing for.
-		 */
-		flush_tlb_all();
-	} else {
-		/*
-		 * XXX fix me: flush_tlb_range() should take an mm pointer instead of a
-		 * vma pointer.
-		 */
-		struct vm_area_struct vma;
-
-		vma.vm_mm = tlb->mm;
-		/* flush the address range from the tlb: */
-		flush_tlb_range(&vma, start, end);
-		/* now flush the virt. page-table area mapping the address range: */
-		flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
-	}
-
-	/* lastly, release the freed pages */
-	nr = tlb->nr;
-	if (!tlb_fast_mode(tlb)) {
-		unsigned long i;
-		tlb->nr = 0;
-		tlb->start_addr = ~0UL;
-		for (i = 0; i < nr; ++i)
-			free_page_and_swap_cache(tlb->pages[i]);
-	}
-}
-
-/*
- * Return a pointer to an initialized struct mmu_gather.
- */
-static inline struct mmu_gather *
-tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush)
-{
-	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
-
-	tlb->mm = mm;
-	/*
-	 * Use fast mode if only 1 CPU is online.
-	 *
-	 * It would be tempting to turn on fast-mode for full_mm_flush as well.  But this
-	 * doesn't work because of speculative accesses and software prefetching: the page
-	 * table of "mm" may (and usually is) the currently active page table and even
-	 * though the kernel won't do any user-space accesses during the TLB shoot down, a
-	 * compiler might use speculation or lfetch.fault on what happens to be a valid
-	 * user-space address.  This in turn could trigger a TLB miss fault (or a VHPT
-	 * walk) and re-insert a TLB entry we just removed.  Slow mode avoids such
-	 * problems.  (We could make fast-mode work by switching the current task to a
-	 * different "mm" during the shootdown.) --davidm 08/02/2002
-	 */
-	tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
-	tlb->fullmm = full_mm_flush;
-	tlb->start_addr = ~0UL;
-	return tlb;
-}
-
-/*
- * Called at the end of the shootdown operation to free up any resources that were
- * collected.
- */
-static inline void
-tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
-{
-	/*
-	 * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and
-	 * tlb->end_addr.
-	 */
-	ia64_tlb_flush_mmu(tlb, start, end);
-
-	/* keep the page table cache within bounds */
-	check_pgt_cache();
-
-	put_cpu_var(mmu_gathers);
-}
-
-/*
- * Logically, this routine frees PAGE.  On MP machines, the actual freeing of the page
- * must be delayed until after the TLB has been flushed (see comments at the beginning of
- * this file).
- */
-static inline void
-tlb_remove_page (struct mmu_gather *tlb, struct page *page)
-{
-	tlb->need_flush = 1;
-
-	if (tlb_fast_mode(tlb)) {
-		free_page_and_swap_cache(page);
-		return;
-	}
-	tlb->pages[tlb->nr++] = page;
-	if (tlb->nr >= FREE_PTE_NR)
-		ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr);
-}
-
-/*
- * Remove TLB entry for PTE mapped at virtual address ADDRESS.  This is called for any
- * PTE, not just those pointing to (normal) physical memory.
- */
-static inline void
-__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
-{
-	if (tlb->start_addr == ~0UL)
-		tlb->start_addr = address;
-	tlb->end_addr = address + PAGE_SIZE;
-}
-
-#define tlb_migrate_finish(mm)	platform_tlb_migrate_finish(mm)
-
-#define tlb_start_vma(tlb, vma)			do { } while (0)
-#define tlb_end_vma(tlb, vma)			do { } while (0)
-
-#define tlb_remove_tlb_entry(tlb, ptep, addr)		\
-do {							\
-	tlb->need_flush = 1;				\
-	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
-} while (0)
-
-#define pte_free_tlb(tlb, ptep)				\
-do {							\
-	tlb->need_flush = 1;				\
-	__pte_free_tlb(tlb, ptep);			\
-} while (0)
-
-#define pmd_free_tlb(tlb, ptep)				\
-do {							\
-	tlb->need_flush = 1;				\
-	__pmd_free_tlb(tlb, ptep);			\
-} while (0)
-
-#define pud_free_tlb(tlb, pudp)				\
-do {							\
-	tlb->need_flush = 1;				\
-	__pud_free_tlb(tlb, pudp);			\
-} while (0)
-
-#endif /* _ASM_IA64_TLB_H */
diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h
deleted file mode 100644
index 3be25dfed164..000000000000
--- a/include/asm-ia64/tlbflush.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _ASM_IA64_TLBFLUSH_H
-#define _ASM_IA64_TLBFLUSH_H
-
-/*
- * Copyright (C) 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-
-#include <linux/mm.h>
-
-#include <asm/intrinsics.h>
-#include <asm/mmu_context.h>
-#include <asm/page.h>
-
-/*
- * Now for some TLB flushing routines.  This is the kind of stuff that
- * can be very expensive, so try to avoid them whenever possible.
- */
-extern void setup_ptcg_sem(int max_purges, int from_palo);
-
-/*
- * Flush everything (kernel mapping may also have changed due to
- * vmalloc/vfree).
- */
-extern void local_flush_tlb_all (void);
-
-#ifdef CONFIG_SMP
-  extern void smp_flush_tlb_all (void);
-  extern void smp_flush_tlb_mm (struct mm_struct *mm);
-  extern void smp_flush_tlb_cpumask (cpumask_t xcpumask);
-# define flush_tlb_all()	smp_flush_tlb_all()
-#else
-# define flush_tlb_all()	local_flush_tlb_all()
-# define smp_flush_tlb_cpumask(m) local_flush_tlb_all()
-#endif
-
-static inline void
-local_finish_flush_tlb_mm (struct mm_struct *mm)
-{
-	if (mm == current->active_mm)
-		activate_context(mm);
-}
-
-/*
- * Flush a specified user mapping.  This is called, e.g., as a result of fork() and
- * exit().  fork() ends up here because the copy-on-write mechanism needs to write-protect
- * the PTEs of the parent task.
- */
-static inline void
-flush_tlb_mm (struct mm_struct *mm)
-{
-	if (!mm)
-		return;
-
-	set_bit(mm->context, ia64_ctx.flushmap);
-	mm->context = 0;
-
-	if (atomic_read(&mm->mm_users) == 0)
-		return;		/* happens as a result of exit_mmap() */
-
-#ifdef CONFIG_SMP
-	smp_flush_tlb_mm(mm);
-#else
-	local_finish_flush_tlb_mm(mm);
-#endif
-}
-
-extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
-
-/*
- * Page-granular tlb flush.
- */
-static inline void
-flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
-{
-#ifdef CONFIG_SMP
-	flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
-#else
-	if (vma->vm_mm == current->active_mm)
-		ia64_ptcl(addr, (PAGE_SHIFT << 2));
-	else
-		vma->vm_mm->context = 0;
-#endif
-}
-
-/*
- * Flush the local TLB. Invoked from another cpu using an IPI.
- */
-#ifdef CONFIG_SMP
-void smp_local_flush_tlb(void);
-#else
-#define smp_local_flush_tlb()
-#endif
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-	flush_tlb_all();	/* XXX fix me */
-}
-
-#endif /* _ASM_IA64_TLBFLUSH_H */
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
deleted file mode 100644
index 32863b3bb1d3..000000000000
--- a/include/asm-ia64/topology.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/include/asm-ia64/topology.h
- *
- * Copyright (C) 2002, Erich Focht, NEC
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef _ASM_IA64_TOPOLOGY_H
-#define _ASM_IA64_TOPOLOGY_H
-
-#include <asm/acpi.h>
-#include <asm/numa.h>
-#include <asm/smp.h>
-
-#ifdef CONFIG_NUMA
-
-/* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */
-#define PENALTY_FOR_NODE_WITH_CPUS 255
-
-/*
- * Distance above which we begin to use zone reclaim
- */
-#define RECLAIM_DISTANCE 15
-
-/*
- * Returns the number of the node containing CPU 'cpu'
- */
-#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
-
-/*
- * Returns a bitmask of CPUs on Node 'node'.
- */
-#define node_to_cpumask(node) (node_to_cpu_mask[node])
-
-/*
- * Returns the number of the node containing Node 'nid'.
- * Not implemented here. Multi-level hierarchies detected with
- * the help of node_distance().
- */
-#define parent_node(nid) (nid)
-
-/*
- * Returns the number of the first CPU on Node 'node'.
- */
-#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
-
-/*
- * Determines the node for a given pci bus
- */
-#define pcibus_to_node(bus) PCI_CONTROLLER(bus)->node
-
-void build_cpu_to_node_map(void);
-
-#define SD_CPU_INIT (struct sched_domain) {		\
-	.span			= CPU_MASK_NONE,	\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 1,			\
-	.max_interval		= 4,			\
-	.busy_factor		= 64,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 2,			\
-	.busy_idx		= 2,			\
-	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_NEWIDLE	\
-				| SD_BALANCE_EXEC	\
-				| SD_WAKE_AFFINE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
-}
-
-/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.span			= CPU_MASK_NONE,	\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 8*(min(num_online_cpus(), 32)), \
-	.busy_factor		= 64,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 2,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 2,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 64,			\
-	.nr_balance_failed	= 0,			\
-}
-
-#endif /* CONFIG_NUMA */
-
-#ifdef CONFIG_SMP
-#define topology_physical_package_id(cpu)	(cpu_data(cpu)->socket_id)
-#define topology_core_id(cpu)			(cpu_data(cpu)->core_id)
-#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
-#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
-#define smt_capable() 				(smp_num_siblings > 1)
-#endif
-
-extern void arch_fix_phys_package_id(int num, u32 slot);
-
-#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)) \
-				)
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h
deleted file mode 100644
index e36b3716e718..000000000000
--- a/include/asm-ia64/types.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _ASM_IA64_TYPES_H
-#define _ASM_IA64_TYPES_H
-
-/*
- * This file is never included by application software unless explicitly requested (e.g.,
- * via linux/types.h) in which case the application is Linux specific so (user-) name
- * space pollution is not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- *
- * Based on <asm-alpha/types.h>.
- *
- * Modified 1998-2000, 2002
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm-generic/int-l64.h>
-
-#ifdef __ASSEMBLY__
-# define __IA64_UL(x)		(x)
-# define __IA64_UL_CONST(x)	x
-
-# ifdef __KERNEL__
-#  define BITS_PER_LONG 64
-# endif
-
-#else
-# define __IA64_UL(x)		((unsigned long)(x))
-# define __IA64_UL_CONST(x)	x##UL
-
-typedef unsigned int umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-# ifdef __KERNEL__
-
-#define BITS_PER_LONG 64
-
-/* DMA addresses are 64-bits wide, in general.  */
-
-typedef u64 dma_addr_t;
-
-# endif /* __KERNEL__ */
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_TYPES_H */
diff --git a/include/asm-ia64/uaccess.h b/include/asm-ia64/uaccess.h
deleted file mode 100644
index 449c8c0fa2bd..000000000000
--- a/include/asm-ia64/uaccess.h
+++ /dev/null
@@ -1,401 +0,0 @@
-#ifndef _ASM_IA64_UACCESS_H
-#define _ASM_IA64_UACCESS_H
-
-/*
- * This file defines various macros to transfer memory areas across
- * the user/kernel boundary.  This needs to be done carefully because
- * this code is executed in kernel mode and uses user-specified
- * addresses.  Thus, we need to be careful not to let the user to
- * trick us into accessing kernel memory that would normally be
- * inaccessible.  This code is also fairly performance sensitive,
- * so we want to spend as little time doing safety checks as
- * possible.
- *
- * To make matters a bit more interesting, these macros sometimes also
- * called from within the kernel itself, in which case the address
- * validity check must be skipped.  The get_fs() macro tells us what
- * to do: if get_fs()==USER_DS, checking is performed, if
- * get_fs()==KERNEL_DS, checking is bypassed.
- *
- * Note that even if the memory area specified by the user is in a
- * valid address range, it is still possible that we'll get a page
- * fault while accessing it.  This is handled by filling out an
- * exception handler fixup entry for each instruction that has the
- * potential to fault.  When such a fault occurs, the page fault
- * handler checks to see whether the faulting instruction has a fixup
- * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
- * then resumes execution at the continuation point.
- *
- * Based on <asm-alpha/uaccess.h>.
- *
- * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/page-flags.h>
-#include <linux/mm.h>
-
-#include <asm/intrinsics.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-
-/*
- * For historical reasons, the following macros are grossly misnamed:
- */
-#define KERNEL_DS	((mm_segment_t) { ~0UL })		/* cf. access_ok() */
-#define USER_DS		((mm_segment_t) { TASK_SIZE-1 })	/* cf. access_ok() */
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-#define get_ds()  (KERNEL_DS)
-#define get_fs()  (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b)	((a).seg == (b).seg)
-
-/*
- * When accessing user memory, we need to make sure the entire area really is in
- * user-level space.  In order to do this efficiently, we make sure that the page at
- * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
- * point inside the virtually mapped linear page table.
- */
-#define __access_ok(addr, size, segment)						\
-({											\
-	__chk_user_ptr(addr);								\
-	(likely((unsigned long) (addr) <= (segment).seg)				\
-	 && ((segment).seg == KERNEL_DS.seg						\
-	     || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT)));	\
-})
-#define access_ok(type, addr, size)	__access_ok((addr), (size), get_fs())
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof/typeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x, ptr)	__put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
-#define get_user(x, ptr)	__get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the programmer has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x, ptr)	__put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
-#define __get_user(x, ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-extern long __put_user_unaligned_unknown (void);
-
-#define __put_user_unaligned(x, ptr)								\
-({												\
-	long __ret;										\
-	switch (sizeof(*(ptr))) {								\
-		case 1: __ret = __put_user((x), (ptr)); break;					\
-		case 2: __ret = (__put_user((x), (u8 __user *)(ptr)))				\
-			| (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
-		case 4: __ret = (__put_user((x), (u16 __user *)(ptr)))				\
-			| (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
-		case 8: __ret = (__put_user((x), (u32 __user *)(ptr)))				\
-			| (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
-		default: __ret = __put_user_unaligned_unknown();				\
-	}											\
-	__ret;											\
-})
-
-extern long __get_user_unaligned_unknown (void);
-
-#define __get_user_unaligned(x, ptr)								\
-({												\
-	long __ret;										\
-	switch (sizeof(*(ptr))) {								\
-		case 1: __ret = __get_user((x), (ptr)); break;					\
-		case 2: __ret = (__get_user((x), (u8 __user *)(ptr)))				\
-			| (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
-		case 4: __ret = (__get_user((x), (u16 __user *)(ptr)))				\
-			| (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
-		case 8: __ret = (__get_user((x), (u32 __user *)(ptr)))				\
-			| (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
-		default: __ret = __get_user_unaligned_unknown();				\
-	}											\
-	__ret;											\
-})
-
-#ifdef ASM_SUPPORTED
-  struct __large_struct { unsigned long buf[100]; };
-# define __m(x) (*(struct __large_struct __user *)(x))
-
-/* We need to declare the __ex_table section before we can use it in .xdata.  */
-asm (".section \"__ex_table\", \"a\"\n\t.previous");
-
-# define __get_user_size(val, addr, n, err)							\
-do {												\
-	register long __gu_r8 asm ("r8") = 0;							\
-	register long __gu_r9 asm ("r9");							\
-	asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n"	\
-	     "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n"						\
-	     "[1:]"										\
-	     : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8));			\
-	(err) = __gu_r8;									\
-	(val) = __gu_r9;									\
-} while (0)
-
-/*
- * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it.  This
- * is because they do not write to any memory gcc knows about, so there are no aliasing
- * issues.
- */
-# define __put_user_size(val, addr, n, err)							\
-do {												\
-	register long __pu_r8 asm ("r8") = 0;							\
-	asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n"	\
-		      "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n"					\
-		      "[1:]"									\
-		      : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8));		\
-	(err) = __pu_r8;									\
-} while (0)
-
-#else /* !ASM_SUPPORTED */
-# define RELOC_TYPE	2	/* ip-rel */
-# define __get_user_size(val, addr, n, err)				\
-do {									\
-	__ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE);	\
-	(err) = ia64_getreg(_IA64_REG_R8);				\
-	(val) = ia64_getreg(_IA64_REG_R9);				\
-} while (0)
-# define __put_user_size(val, addr, n, err)							\
-do {												\
-	__st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val));	\
-	(err) = ia64_getreg(_IA64_REG_R8);							\
-} while (0)
-#endif /* !ASM_SUPPORTED */
-
-extern void __get_user_unknown (void);
-
-/*
- * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
- * could clobber r8 and r9 (among others).  Thus, be careful not to evaluate it while
- * using r8/r9.
- */
-#define __do_get_user(check, x, ptr, size, segment)					\
-({											\
-	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);				\
-	__typeof__ (size) __gu_size = (size);						\
-	long __gu_err = -EFAULT;							\
-	unsigned long __gu_val = 0;							\
-	if (!check || __access_ok(__gu_ptr, size, segment))				\
-		switch (__gu_size) {							\
-		      case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break;	\
-		      case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break;	\
-		      case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break;	\
-		      case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break;	\
-		      default: __get_user_unknown(); break;				\
-		}									\
-	(x) = (__typeof__(*(__gu_ptr))) __gu_val;					\
-	__gu_err;									\
-})
-
-#define __get_user_nocheck(x, ptr, size)	__do_get_user(0, x, ptr, size, KERNEL_DS)
-#define __get_user_check(x, ptr, size, segment)	__do_get_user(1, x, ptr, size, segment)
-
-extern void __put_user_unknown (void);
-
-/*
- * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
- * could clobber r8 (among others).  Thus, be careful not to evaluate them while using r8.
- */
-#define __do_put_user(check, x, ptr, size, segment)					\
-({											\
-	__typeof__ (x) __pu_x = (x);							\
-	__typeof__ (*(ptr)) __user *__pu_ptr = (ptr);					\
-	__typeof__ (size) __pu_size = (size);						\
-	long __pu_err = -EFAULT;							\
-											\
-	if (!check || __access_ok(__pu_ptr, __pu_size, segment))			\
-		switch (__pu_size) {							\
-		      case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break;	\
-		      case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break;	\
-		      case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break;	\
-		      case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break;	\
-		      default: __put_user_unknown(); break;				\
-		}									\
-	__pu_err;									\
-})
-
-#define __put_user_nocheck(x, ptr, size)	__do_put_user(0, x, ptr, size, KERNEL_DS)
-#define __put_user_check(x, ptr, size, segment)	__do_put_user(1, x, ptr, size, segment)
-
-/*
- * Complex access routines
- */
-extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
-					       unsigned long count);
-
-static inline unsigned long
-__copy_to_user (void __user *to, const void *from, unsigned long count)
-{
-	return __copy_user(to, (__force void __user *) from, count);
-}
-
-static inline unsigned long
-__copy_from_user (void *to, const void __user *from, unsigned long count)
-{
-	return __copy_user((__force void __user *) to, from, count);
-}
-
-#define __copy_to_user_inatomic		__copy_to_user
-#define __copy_from_user_inatomic	__copy_from_user
-#define copy_to_user(to, from, n)							\
-({											\
-	void __user *__cu_to = (to);							\
-	const void *__cu_from = (from);							\
-	long __cu_len = (n);								\
-											\
-	if (__access_ok(__cu_to, __cu_len, get_fs()))					\
-		__cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len);	\
-	__cu_len;									\
-})
-
-#define copy_from_user(to, from, n)							\
-({											\
-	void *__cu_to = (to);								\
-	const void __user *__cu_from = (from);						\
-	long __cu_len = (n);								\
-											\
-	__chk_user_ptr(__cu_from);							\
-	if (__access_ok(__cu_from, __cu_len, get_fs()))					\
-		__cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);	\
-	__cu_len;									\
-})
-
-#define __copy_in_user(to, from, size)	__copy_user((to), (from), (size))
-
-static inline unsigned long
-copy_in_user (void __user *to, const void __user *from, unsigned long n)
-{
-	if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
-		n = __copy_user(to, from, n);
-	return n;
-}
-
-extern unsigned long __do_clear_user (void __user *, unsigned long);
-
-#define __clear_user(to, n)		__do_clear_user(to, n)
-
-#define clear_user(to, n)					\
-({								\
-	unsigned long __cu_len = (n);				\
-	if (__access_ok(to, __cu_len, get_fs()))		\
-		__cu_len = __do_clear_user(to, __cu_len);	\
-	__cu_len;						\
-})
-
-
-/*
- * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
- * strlen.
- */
-extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
-
-#define strncpy_from_user(to, from, n)					\
-({									\
-	const char __user * __sfu_from = (from);			\
-	long __sfu_ret = -EFAULT;					\
-	if (__access_ok(__sfu_from, 0, get_fs()))			\
-		__sfu_ret = __strncpy_from_user((to), __sfu_from, (n));	\
-	__sfu_ret;							\
-})
-
-/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-extern unsigned long __strlen_user (const char __user *);
-
-#define strlen_user(str)				\
-({							\
-	const char __user *__su_str = (str);		\
-	unsigned long __su_ret = 0;			\
-	if (__access_ok(__su_str, 0, get_fs()))		\
-		__su_ret = __strlen_user(__su_str);	\
-	__su_ret;					\
-})
-
-/*
- * Returns: 0 if exception before NUL or reaching the supplied limit
- * (N), a value greater than N if the limit would be exceeded, else
- * strlen.
- */
-extern unsigned long __strnlen_user (const char __user *, long);
-
-#define strnlen_user(str, len)					\
-({								\
-	const char __user *__su_str = (str);			\
-	unsigned long __su_ret = 0;				\
-	if (__access_ok(__su_str, 0, get_fs()))			\
-		__su_ret = __strnlen_user(__su_str, len);	\
-	__su_ret;						\
-})
-
-/* Generic code can't deal with the location-relative format that we use for compactness.  */
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
-
-struct exception_table_entry {
-	int addr;	/* location-relative address of insn this fixup is for */
-	int cont;	/* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
-};
-
-extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
-extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
-
-static inline int
-ia64_done_with_exception (struct pt_regs *regs)
-{
-	const struct exception_table_entry *e;
-	e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri);
-	if (e) {
-		ia64_handle_exception(regs, e);
-		return 1;
-	}
-	return 0;
-}
-
-#define ARCH_HAS_TRANSLATE_MEM_PTR	1
-static __inline__ char *
-xlate_dev_mem_ptr (unsigned long p)
-{
-	struct page *page;
-	char * ptr;
-
-	page = pfn_to_page(p >> PAGE_SHIFT);
-	if (PageUncached(page))
-		ptr = (char *)p + __IA64_UNCACHED_OFFSET;
-	else
-		ptr = __va(p);
-
-	return ptr;
-}
-
-/*
- * Convert a virtual cached kernel memory pointer to an uncached pointer
- */
-static __inline__ char *
-xlate_dev_kmem_ptr (char * p)
-{
-	struct page *page;
-	char * ptr;
-
-	page = virt_to_page((unsigned long)p);
-	if (PageUncached(page))
-		ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
-	else
-		ptr = p;
-
-	return ptr;
-}
-
-#endif /* _ASM_IA64_UACCESS_H */
diff --git a/include/asm-ia64/ucontext.h b/include/asm-ia64/ucontext.h
deleted file mode 100644
index bf573dc8ca6a..000000000000
--- a/include/asm-ia64/ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_IA64_UCONTEXT_H
-#define _ASM_IA64_UCONTEXT_H
-
-struct ucontext {
-	struct sigcontext uc_mcontext;
-};
-
-#define uc_link		uc_mcontext.sc_gr[0]	/* wrong type; nobody cares */
-#define uc_sigmask	uc_mcontext.sc_sigmask
-#define uc_stack	uc_mcontext.sc_stack
-
-#endif /* _ASM_IA64_UCONTEXT_H */
diff --git a/include/asm-ia64/unaligned.h b/include/asm-ia64/unaligned.h
deleted file mode 100644
index 7bddc7f58584..000000000000
--- a/include/asm-ia64/unaligned.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_IA64_UNALIGNED_H
-#define _ASM_IA64_UNALIGNED_H
-
-#include <linux/unaligned/le_struct.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-
-#endif /* _ASM_IA64_UNALIGNED_H */
diff --git a/include/asm-ia64/uncached.h b/include/asm-ia64/uncached.h
deleted file mode 100644
index 13d7e65ca3cc..000000000000
--- a/include/asm-ia64/uncached.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * Prototypes for the uncached page allocator
- */
-
-extern unsigned long uncached_alloc_page(int starting_nid, int n_pages);
-extern void uncached_free_page(unsigned long uc_addr, int n_pages);
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
deleted file mode 100644
index e60314716122..000000000000
--- a/include/asm-ia64/unistd.h
+++ /dev/null
@@ -1,378 +0,0 @@
-#ifndef _ASM_IA64_UNISTD_H
-#define _ASM_IA64_UNISTD_H
-
-/*
- * IA-64 Linux syscall numbers and inline-functions.
- *
- * Copyright (C) 1998-2005 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <asm/break.h>
-
-#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
-
-#define __NR_ni_syscall			1024
-#define __NR_exit			1025
-#define __NR_read			1026
-#define __NR_write			1027
-#define __NR_open			1028
-#define __NR_close			1029
-#define __NR_creat			1030
-#define __NR_link			1031
-#define __NR_unlink			1032
-#define __NR_execve			1033
-#define __NR_chdir			1034
-#define __NR_fchdir			1035
-#define __NR_utimes			1036
-#define __NR_mknod			1037
-#define __NR_chmod			1038
-#define __NR_chown			1039
-#define __NR_lseek			1040
-#define __NR_getpid			1041
-#define __NR_getppid			1042
-#define __NR_mount			1043
-#define __NR_umount			1044
-#define __NR_setuid			1045
-#define __NR_getuid			1046
-#define __NR_geteuid			1047
-#define __NR_ptrace			1048
-#define __NR_access			1049
-#define __NR_sync			1050
-#define __NR_fsync			1051
-#define __NR_fdatasync			1052
-#define __NR_kill			1053
-#define __NR_rename			1054
-#define __NR_mkdir			1055
-#define __NR_rmdir			1056
-#define __NR_dup			1057
-#define __NR_pipe			1058
-#define __NR_times			1059
-#define __NR_brk			1060
-#define __NR_setgid			1061
-#define __NR_getgid			1062
-#define __NR_getegid			1063
-#define __NR_acct			1064
-#define __NR_ioctl			1065
-#define __NR_fcntl			1066
-#define __NR_umask			1067
-#define __NR_chroot			1068
-#define __NR_ustat			1069
-#define __NR_dup2			1070
-#define __NR_setreuid			1071
-#define __NR_setregid			1072
-#define __NR_getresuid			1073
-#define __NR_setresuid			1074
-#define __NR_getresgid			1075
-#define __NR_setresgid			1076
-#define __NR_getgroups			1077
-#define __NR_setgroups			1078
-#define __NR_getpgid			1079
-#define __NR_setpgid			1080
-#define __NR_setsid			1081
-#define __NR_getsid			1082
-#define __NR_sethostname		1083
-#define __NR_setrlimit			1084
-#define __NR_getrlimit			1085
-#define __NR_getrusage			1086
-#define __NR_gettimeofday		1087
-#define __NR_settimeofday		1088
-#define __NR_select			1089
-#define __NR_poll			1090
-#define __NR_symlink			1091
-#define __NR_readlink			1092
-#define __NR_uselib			1093
-#define __NR_swapon			1094
-#define __NR_swapoff			1095
-#define __NR_reboot			1096
-#define __NR_truncate			1097
-#define __NR_ftruncate			1098
-#define __NR_fchmod			1099
-#define __NR_fchown			1100
-#define __NR_getpriority		1101
-#define __NR_setpriority		1102
-#define __NR_statfs			1103
-#define __NR_fstatfs			1104
-#define __NR_gettid			1105
-#define __NR_semget			1106
-#define __NR_semop			1107
-#define __NR_semctl			1108
-#define __NR_msgget			1109
-#define __NR_msgsnd			1110
-#define __NR_msgrcv			1111
-#define __NR_msgctl			1112
-#define __NR_shmget			1113
-#define __NR_shmat			1114
-#define __NR_shmdt			1115
-#define __NR_shmctl			1116
-/* also known as klogctl() in GNU libc: */
-#define __NR_syslog			1117
-#define __NR_setitimer			1118
-#define __NR_getitimer			1119
-/* 1120 was __NR_old_stat */
-/* 1121 was __NR_old_lstat */
-/* 1122 was __NR_old_fstat */
-#define __NR_vhangup			1123
-#define __NR_lchown			1124
-#define __NR_remap_file_pages		1125
-#define __NR_wait4			1126
-#define __NR_sysinfo			1127
-#define __NR_clone			1128
-#define __NR_setdomainname		1129
-#define __NR_uname			1130
-#define __NR_adjtimex			1131
-/* 1132 was __NR_create_module */
-#define __NR_init_module		1133
-#define __NR_delete_module		1134
-/* 1135 was __NR_get_kernel_syms */
-/* 1136 was __NR_query_module */
-#define __NR_quotactl			1137
-#define __NR_bdflush			1138
-#define __NR_sysfs			1139
-#define __NR_personality		1140
-#define __NR_afs_syscall		1141
-#define __NR_setfsuid			1142
-#define __NR_setfsgid			1143
-#define __NR_getdents			1144
-#define __NR_flock			1145
-#define __NR_readv			1146
-#define __NR_writev			1147
-#define __NR_pread64			1148
-#define __NR_pwrite64			1149
-#define __NR__sysctl			1150
-#define __NR_mmap			1151
-#define __NR_munmap			1152
-#define __NR_mlock			1153
-#define __NR_mlockall			1154
-#define __NR_mprotect			1155
-#define __NR_mremap			1156
-#define __NR_msync			1157
-#define __NR_munlock			1158
-#define __NR_munlockall			1159
-#define __NR_sched_getparam		1160
-#define __NR_sched_setparam		1161
-#define __NR_sched_getscheduler		1162
-#define __NR_sched_setscheduler		1163
-#define __NR_sched_yield		1164
-#define __NR_sched_get_priority_max	1165
-#define __NR_sched_get_priority_min	1166
-#define __NR_sched_rr_get_interval	1167
-#define __NR_nanosleep			1168
-#define __NR_nfsservctl			1169
-#define __NR_prctl			1170
-/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
-#define __NR_mmap2			1172
-#define __NR_pciconfig_read		1173
-#define __NR_pciconfig_write		1174
-#define __NR_perfmonctl			1175
-#define __NR_sigaltstack		1176
-#define __NR_rt_sigaction		1177
-#define __NR_rt_sigpending		1178
-#define __NR_rt_sigprocmask		1179
-#define __NR_rt_sigqueueinfo		1180
-#define __NR_rt_sigreturn		1181
-#define __NR_rt_sigsuspend		1182
-#define __NR_rt_sigtimedwait		1183
-#define __NR_getcwd			1184
-#define __NR_capget			1185
-#define __NR_capset			1186
-#define __NR_sendfile			1187
-#define __NR_getpmsg			1188
-#define __NR_putpmsg			1189
-#define __NR_socket			1190
-#define __NR_bind			1191
-#define __NR_connect			1192
-#define __NR_listen			1193
-#define __NR_accept			1194
-#define __NR_getsockname		1195
-#define __NR_getpeername		1196
-#define __NR_socketpair			1197
-#define __NR_send			1198
-#define __NR_sendto			1199
-#define __NR_recv			1200
-#define __NR_recvfrom			1201
-#define __NR_shutdown			1202
-#define __NR_setsockopt			1203
-#define __NR_getsockopt			1204
-#define __NR_sendmsg			1205
-#define __NR_recvmsg			1206
-#define __NR_pivot_root			1207
-#define __NR_mincore			1208
-#define __NR_madvise			1209
-#define __NR_stat			1210
-#define __NR_lstat			1211
-#define __NR_fstat			1212
-#define __NR_clone2			1213
-#define __NR_getdents64			1214
-#define __NR_getunwind			1215
-#define __NR_readahead			1216
-#define __NR_setxattr			1217
-#define __NR_lsetxattr			1218
-#define __NR_fsetxattr			1219
-#define __NR_getxattr			1220
-#define __NR_lgetxattr			1221
-#define __NR_fgetxattr			1222
-#define __NR_listxattr			1223
-#define __NR_llistxattr			1224
-#define __NR_flistxattr			1225
-#define __NR_removexattr		1226
-#define __NR_lremovexattr		1227
-#define __NR_fremovexattr		1228
-#define __NR_tkill			1229
-#define __NR_futex			1230
-#define __NR_sched_setaffinity		1231
-#define __NR_sched_getaffinity		1232
-#define __NR_set_tid_address		1233
-#define __NR_fadvise64			1234
-#define __NR_tgkill			1235
-#define __NR_exit_group			1236
-#define __NR_lookup_dcookie		1237
-#define __NR_io_setup			1238
-#define __NR_io_destroy			1239
-#define __NR_io_getevents		1240
-#define __NR_io_submit			1241
-#define __NR_io_cancel			1242
-#define __NR_epoll_create		1243
-#define __NR_epoll_ctl			1244
-#define __NR_epoll_wait			1245
-#define __NR_restart_syscall		1246
-#define __NR_semtimedop			1247
-#define __NR_timer_create		1248
-#define __NR_timer_settime		1249
-#define __NR_timer_gettime		1250
-#define __NR_timer_getoverrun		1251
-#define __NR_timer_delete		1252
-#define __NR_clock_settime		1253
-#define __NR_clock_gettime		1254
-#define __NR_clock_getres		1255
-#define __NR_clock_nanosleep		1256
-#define __NR_fstatfs64			1257
-#define __NR_statfs64			1258
-#define __NR_mbind			1259
-#define __NR_get_mempolicy		1260
-#define __NR_set_mempolicy		1261
-#define __NR_mq_open			1262
-#define __NR_mq_unlink			1263
-#define __NR_mq_timedsend		1264
-#define __NR_mq_timedreceive		1265
-#define __NR_mq_notify			1266
-#define __NR_mq_getsetattr		1267
-#define __NR_kexec_load			1268
-#define __NR_vserver			1269
-#define __NR_waitid			1270
-#define __NR_add_key			1271
-#define __NR_request_key		1272
-#define __NR_keyctl			1273
-#define __NR_ioprio_set			1274
-#define __NR_ioprio_get			1275
-#define __NR_move_pages			1276
-#define __NR_inotify_init		1277
-#define __NR_inotify_add_watch		1278
-#define __NR_inotify_rm_watch		1279
-#define __NR_migrate_pages		1280
-#define __NR_openat			1281
-#define __NR_mkdirat			1282
-#define __NR_mknodat			1283
-#define __NR_fchownat			1284
-#define __NR_futimesat			1285
-#define __NR_newfstatat			1286
-#define __NR_unlinkat			1287
-#define __NR_renameat			1288
-#define __NR_linkat			1289
-#define __NR_symlinkat			1290
-#define __NR_readlinkat			1291
-#define __NR_fchmodat			1292
-#define __NR_faccessat			1293
-#define __NR_pselect6			1294
-#define __NR_ppoll			1295
-#define __NR_unshare			1296
-#define __NR_splice			1297
-#define __NR_set_robust_list		1298
-#define __NR_get_robust_list		1299
-#define __NR_sync_file_range		1300
-#define __NR_tee			1301
-#define __NR_vmsplice			1302
-#define __NR_fallocate			1303
-#define __NR_getcpu			1304
-#define __NR_epoll_pwait		1305
-#define __NR_utimensat			1306
-#define __NR_signalfd			1307
-#define __NR_timerfd			1308
-#define __NR_eventfd			1309
-#define __NR_timerfd_create		1310
-#define __NR_timerfd_settime		1311
-#define __NR_timerfd_gettime		1312
-
-#ifdef __KERNEL__
-
-
-#define NR_syscalls			289 /* length of syscall table */
-
-/*
- * The following defines stop scripts/checksyscalls.sh from complaining about
- * unimplemented system calls.  Glibc provides for each of these by using
- * more modern equivalent system calls.
- */
-#define __IGNORE_fork		/* clone() */
-#define __IGNORE_time		/* gettimeofday() */
-#define __IGNORE_alarm		/* setitimer(ITIMER_REAL, ... */
-#define __IGNORE_pause		/* rt_sigprocmask(), rt_sigsuspend() */
-#define __IGNORE_utime		/* utimes() */
-#define __IGNORE_getpgrp	/* getpgid() */
-#define __IGNORE_vfork		/* clone() */
-
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-#ifdef CONFIG_IA32_SUPPORT
-# define __ARCH_WANT_SYS_FADVISE64
-# define __ARCH_WANT_SYS_GETPGRP
-# define __ARCH_WANT_SYS_LLSEEK
-# define __ARCH_WANT_SYS_NICE
-# define __ARCH_WANT_SYS_OLD_GETRLIMIT
-# define __ARCH_WANT_SYS_OLDUMOUNT
-# define __ARCH_WANT_SYS_SIGPENDING
-# define __ARCH_WANT_SYS_SIGPROCMASK
-# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-# define __ARCH_WANT_COMPAT_SYS_TIME
-#endif
-
-#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
-
-#include <linux/types.h>
-#include <linux/linkage.h>
-#include <linux/compiler.h>
-
-extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
-
-asmlinkage unsigned long sys_mmap(
-				unsigned long addr, unsigned long len,
-				int prot, int flags,
-				int fd, long off);
-asmlinkage unsigned long sys_mmap2(
-				unsigned long addr, unsigned long len,
-				int prot, int flags,
-				int fd, long pgoff);
-struct pt_regs;
-struct sigaction;
-long sys_execve(char __user *filename, char __user * __user *argv,
-			   char __user * __user *envp, struct pt_regs *regs);
-asmlinkage long sys_pipe(void);
-asmlinkage long sys_rt_sigaction(int sig,
-				 const struct sigaction __user *act,
-				 struct sigaction __user *oact,
-				 size_t sigsetsize);
-
-/*
- * "Conditional" syscalls
- *
- * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
- * kernel/sys_ni.c.  This version causes warnings because the declaration isn't a
- * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
- * declarations have prototypes at the moment.
- */
-#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_IA64_UNISTD_H */
diff --git a/include/asm-ia64/unwind.h b/include/asm-ia64/unwind.h
deleted file mode 100644
index 1af3875f1a57..000000000000
--- a/include/asm-ia64/unwind.h
+++ /dev/null
@@ -1,233 +0,0 @@
-#ifndef _ASM_IA64_UNWIND_H
-#define _ASM_IA64_UNWIND_H
-
-/*
- * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * A simple API for unwinding kernel stacks.  This is used for
- * debugging and error reporting purposes.  The kernel doesn't need
- * full-blown stack unwinding with all the bells and whitles, so there
- * is not much point in implementing the full IA-64 unwind API (though
- * it would of course be possible to implement the kernel API on top
- * of it).
- */
-
-struct task_struct;	/* forward declaration */
-struct switch_stack;	/* forward declaration */
-
-enum unw_application_register {
-	UNW_AR_BSP,
-	UNW_AR_BSPSTORE,
-	UNW_AR_PFS,
-	UNW_AR_RNAT,
-	UNW_AR_UNAT,
-	UNW_AR_LC,
-	UNW_AR_EC,
-	UNW_AR_FPSR,
-	UNW_AR_RSC,
-	UNW_AR_CCV,
-	UNW_AR_CSD,
-	UNW_AR_SSD
-};
-
-/*
- * The following declarations are private to the unwind
- * implementation:
- */
-
-struct unw_stack {
-	unsigned long limit;
-	unsigned long top;
-};
-
-#define UNW_FLAG_INTERRUPT_FRAME	(1UL << 0)
-
-/*
- * No user of this module should every access this structure directly
- * as it is subject to change.  It is declared here solely so we can
- * use automatic variables.
- */
-struct unw_frame_info {
-	struct unw_stack regstk;
-	struct unw_stack memstk;
-	unsigned int flags;
-	short hint;
-	short prev_script;
-
-	/* current frame info: */
-	unsigned long bsp;		/* backing store pointer value */
-	unsigned long sp;		/* stack pointer value */
-	unsigned long psp;		/* previous sp value */
-	unsigned long ip;		/* instruction pointer value */
-	unsigned long pr;		/* current predicate values */
-	unsigned long *cfm_loc;		/* cfm save location (or NULL) */
-	unsigned long pt;		/* struct pt_regs location */
-
-	struct task_struct *task;
-	struct switch_stack *sw;
-
-	/* preserved state: */
-	unsigned long *bsp_loc;		/* previous bsp save location */
-	unsigned long *bspstore_loc;
-	unsigned long *pfs_loc;
-	unsigned long *rnat_loc;
-	unsigned long *rp_loc;
-	unsigned long *pri_unat_loc;
-	unsigned long *unat_loc;
-	unsigned long *pr_loc;
-	unsigned long *lc_loc;
-	unsigned long *fpsr_loc;
-	struct unw_ireg {
-		unsigned long *loc;
-		struct unw_ireg_nat {
-			unsigned long type : 3;		/* enum unw_nat_type */
-			signed long off : 61;		/* NaT word is at loc+nat.off */
-		} nat;
-	} r4, r5, r6, r7;
-	unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc;
-	struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16];
-};
-
-/*
- * The official API follows below:
- */
-
-struct unw_table_entry {
-	u64 start_offset;
-	u64 end_offset;
-	u64 info_offset;
-};
-
-/*
- * Initialize unwind support.
- */
-extern void unw_init (void);
-
-extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp,
-				   const void *table_start, const void *table_end);
-
-extern void unw_remove_unwind_table (void *handle);
-
-/*
- * Prepare to unwind blocked task t.
- */
-extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t);
-
-extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t,
-				 struct switch_stack *sw);
-
-/*
- * Prepare to unwind the currently running thread.
- */
-extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg);
-
-/*
- * Unwind to previous to frame.  Returns 0 if successful, negative
- * number in case of an error.
- */
-extern int unw_unwind (struct unw_frame_info *info);
-
-/*
- * Unwind until the return pointer is in user-land (or until an error
- * occurs).  Returns 0 if successful, negative number in case of
- * error.
- */
-extern int unw_unwind_to_user (struct unw_frame_info *info);
-
-#define unw_is_intr_frame(info)	(((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0)
-
-static inline int
-unw_get_ip (struct unw_frame_info *info, unsigned long *valp)
-{
-	*valp = (info)->ip;
-	return 0;
-}
-
-static inline int
-unw_get_sp (struct unw_frame_info *info, unsigned long *valp)
-{
-	*valp = (info)->sp;
-	return 0;
-}
-
-static inline int
-unw_get_psp (struct unw_frame_info *info, unsigned long *valp)
-{
-	*valp = (info)->psp;
-	return 0;
-}
-
-static inline int
-unw_get_bsp (struct unw_frame_info *info, unsigned long *valp)
-{
-	*valp = (info)->bsp;
-	return 0;
-}
-
-static inline int
-unw_get_cfm (struct unw_frame_info *info, unsigned long *valp)
-{
-	*valp = *(info)->cfm_loc;
-	return 0;
-}
-
-static inline int
-unw_set_cfm (struct unw_frame_info *info, unsigned long val)
-{
-	*(info)->cfm_loc = val;
-	return 0;
-}
-
-static inline int
-unw_get_rp (struct unw_frame_info *info, unsigned long *val)
-{
-	if (!info->rp_loc)
-		return -1;
-	*val = *info->rp_loc;
-	return 0;
-}
-
-extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int);
-extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int);
-extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int);
-extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int);
-extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int);
-
-static inline int
-unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat)
-{
-	return unw_access_gr(i, n, &v, &nat, 1);
-}
-
-static inline int
-unw_set_br (struct unw_frame_info *i, int n, unsigned long v)
-{
-	return unw_access_br(i, n, &v, 1);
-}
-
-static inline int
-unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v)
-{
-	return unw_access_fr(i, n, &v, 1);
-}
-
-static inline int
-unw_set_ar (struct unw_frame_info *i, int n, unsigned long v)
-{
-	return unw_access_ar(i, n, &v, 1);
-}
-
-static inline int
-unw_set_pr (struct unw_frame_info *i, unsigned long v)
-{
-	return unw_access_pr(i, &v, 1);
-}
-
-#define unw_get_gr(i,n,v,nat)	unw_access_gr(i,n,v,nat,0)
-#define unw_get_br(i,n,v)	unw_access_br(i,n,v,0)
-#define unw_get_fr(i,n,v)	unw_access_fr(i,n,v,0)
-#define unw_get_ar(i,n,v)	unw_access_ar(i,n,v,0)
-#define unw_get_pr(i,v)		unw_access_pr(i,v,0)
-
-#endif /* _ASM_UNWIND_H */
diff --git a/include/asm-ia64/user.h b/include/asm-ia64/user.h
deleted file mode 100644
index 8b9821110348..000000000000
--- a/include/asm-ia64/user.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _ASM_IA64_USER_H
-#define _ASM_IA64_USER_H
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd).  The file contents are as
- * follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *	what is present in the file.  Directly after this is a
- *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
- *	are stored as part of the upage.  The upage should always be
- *	only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *	current->brk to pick up all of the user variables, plus any memory
- *	that may have been sbrk'ed.  No attempt is made to determine if a
- *	page is demand-zero or if a page is totally unused, we just cover
- *	the entire range.  All of the addresses are rounded in such a way
- *	that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *	backtrace.  We need to write the data from usp to
- *	current->start_stack, so we round each of these in order to be able
- *	to write an integer number of pages.
- *
- * Modified 1998, 1999, 2001
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <linux/ptrace.h>
-#include <linux/types.h>
-
-#include <asm/page.h>
-
-#define EF_SIZE		3072	/* XXX fix me */
-
-struct user {
-	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
-	size_t		u_tsize;		/* text size (pages) */
-	size_t		u_dsize;		/* data size (pages) */
-	size_t		u_ssize;		/* stack size (pages) */
-	unsigned long	start_code;		/* text starting address */
-	unsigned long	start_data;		/* data starting address */
-	unsigned long	start_stack;		/* stack starting address */
-	long int	signal;			/* signal causing core dump */
-	unsigned long	u_ar0;			/* help gdb find registers */
-	unsigned long	magic;			/* identifies a core file */
-	char		u_comm[32];		/* user command name */
-};
-
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ASM_IA64_USER_H */
diff --git a/include/asm-ia64/ustack.h b/include/asm-ia64/ustack.h
deleted file mode 100644
index 504167c35b8b..000000000000
--- a/include/asm-ia64/ustack.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_IA64_USTACK_H
-#define _ASM_IA64_USTACK_H
-
-/*
- * Constants for the user stack size
- */
-
-#ifdef __KERNEL__
-#include <asm/page.h>
-
-/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
-#define MAX_USER_STACK_SIZE	(RGN_MAP_LIMIT/2)
-#define STACK_TOP		(0x6000000000000000UL + RGN_MAP_LIMIT)
-#define STACK_TOP_MAX		STACK_TOP
-#endif
-
-/* Make a default stack size of 2GiB */
-#define DEFAULT_USER_STACK_SIZE	(1UL << 31)
-
-#endif /* _ASM_IA64_USTACK_H */
diff --git a/include/asm-ia64/uv/uv_hub.h b/include/asm-ia64/uv/uv_hub.h
deleted file mode 100644
index f607018af4a1..000000000000
--- a/include/asm-ia64/uv/uv_hub.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV architectural definitions
- *
- * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef __ASM_IA64_UV_HUB_H__
-#define __ASM_IA64_UV_HUB_H__
-
-#include <linux/numa.h>
-#include <linux/percpu.h>
-#include <asm/types.h>
-#include <asm/percpu.h>
-
-
-/*
- * Addressing Terminology
- *
- *	M       - The low M bits of a physical address represent the offset
- *		  into the blade local memory. RAM memory on a blade is physically
- *		  contiguous (although various IO spaces may punch holes in
- *		  it)..
- *
- * 	N	- Number of bits in the node portion of a socket physical
- * 		  address.
- *
- * 	NASID   - network ID of a router, Mbrick or Cbrick. Nasid values of
- * 	 	  routers always have low bit of 1, C/MBricks have low bit
- * 		  equal to 0. Most addressing macros that target UV hub chips
- * 		  right shift the NASID by 1 to exclude the always-zero bit.
- * 		  NASIDs contain up to 15 bits.
- *
- *	GNODE   - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
- *		  of nasids.
- *
- * 	PNODE   - the low N bits of the GNODE. The PNODE is the most useful variant
- * 		  of the nasid for socket usage.
- *
- *
- *  NumaLink Global Physical Address Format:
- *  +--------------------------------+---------------------+
- *  |00..000|      GNODE             |      NodeOffset     |
- *  +--------------------------------+---------------------+
- *          |<-------53 - M bits --->|<--------M bits ----->
- *
- *	M - number of node offset bits (35 .. 40)
- *
- *
- *  Memory/UV-HUB Processor Socket Address Format:
- *  +----------------+---------------+---------------------+
- *  |00..000000000000|   PNODE       |      NodeOffset     |
- *  +----------------+---------------+---------------------+
- *                   <--- N bits --->|<--------M bits ----->
- *
- *	M - number of node offset bits (35 .. 40)
- *	N - number of PNODE bits (0 .. 10)
- *
- *		Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
- *		The actual values are configuration dependent and are set at
- *		boot time. M & N values are set by the hardware/BIOS at boot.
- */
-
-
-/*
- * Maximum number of bricks in all partitions and in all coherency domains.
- * This is the total number of bricks accessible in the numalink fabric. It
- * includes all C & M bricks. Routers are NOT included.
- *
- * This value is also the value of the maximum number of non-router NASIDs
- * in the numalink fabric.
- *
- * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
- */
-#define UV_MAX_NUMALINK_BLADES	16384
-
-/*
- * Maximum number of C/Mbricks within a software SSI (hardware may support
- * more).
- */
-#define UV_MAX_SSI_BLADES	1
-
-/*
- * The largest possible NASID of a C or M brick (+ 2)
- */
-#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
-
-/*
- * The following defines attributes of the HUB chip. These attributes are
- * frequently referenced and are kept in the per-cpu data areas of each cpu.
- * They are kept together in a struct to minimize cache misses.
- */
-struct uv_hub_info_s {
-	unsigned long	global_mmr_base;
-	unsigned long	gpa_mask;
-	unsigned long	gnode_upper;
-	unsigned long	lowmem_remap_top;
-	unsigned long	lowmem_remap_base;
-	unsigned short	pnode;
-	unsigned short	pnode_mask;
-	unsigned short	coherency_domain_number;
-	unsigned short	numa_blade_id;
-	unsigned char	blade_processor_id;
-	unsigned char	m_val;
-	unsigned char	n_val;
-};
-DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
-#define uv_hub_info 		(&__get_cpu_var(__uv_hub_info))
-#define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
-
-/*
- * Local & Global MMR space macros.
- * 	Note: macros are intended to be used ONLY by inline functions
- * 	in this file - not by other kernel code.
- * 		n -  NASID (full 15-bit global nasid)
- * 		g -  GNODE (full 15-bit global nasid, right shifted 1)
- * 		p -  PNODE (local part of nsids, right shifted 1)
- */
-#define UV_NASID_TO_PNODE(n)		(((n) >> 1) & uv_hub_info->pnode_mask)
-#define UV_PNODE_TO_NASID(p)		(((p) << 1) | uv_hub_info->gnode_upper)
-
-#define UV_LOCAL_MMR_BASE		0xf4000000UL
-#define UV_GLOBAL_MMR32_BASE		0xf8000000UL
-#define UV_GLOBAL_MMR64_BASE		(uv_hub_info->global_mmr_base)
-
-#define UV_GLOBAL_MMR32_PNODE_SHIFT	15
-#define UV_GLOBAL_MMR64_PNODE_SHIFT	26
-
-#define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
-
-#define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
-	((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
-
-/*
- * Macros for converting between kernel virtual addresses, socket local physical
- * addresses, and UV global physical addresses.
- * 	Note: use the standard __pa() & __va() macros for converting
- * 	      between socket virtual and socket physical addresses.
- */
-
-/* socket phys RAM --> UV global physical address */
-static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
-{
-	if (paddr < uv_hub_info->lowmem_remap_top)
-		paddr += uv_hub_info->lowmem_remap_base;
-	return paddr | uv_hub_info->gnode_upper;
-}
-
-
-/* socket virtual --> UV global physical address */
-static inline unsigned long uv_gpa(void *v)
-{
-	return __pa(v) | uv_hub_info->gnode_upper;
-}
-
-/* socket virtual --> UV global physical address */
-static inline void *uv_vgpa(void *v)
-{
-	return (void *)uv_gpa(v);
-}
-
-/* UV global physical address --> socket virtual */
-static inline void *uv_va(unsigned long gpa)
-{
-	return __va(gpa & uv_hub_info->gpa_mask);
-}
-
-/* pnode, offset --> socket virtual */
-static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
-{
-	return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
-}
-
-
-/*
- * Access global MMRs using the low memory MMR32 space. This region supports
- * faster MMR access but not all MMRs are accessible in this space.
- */
-static inline unsigned long *uv_global_mmr32_address(int pnode,
-				unsigned long offset)
-{
-	return __va(UV_GLOBAL_MMR32_BASE |
-		       UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
-}
-
-static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
-				 unsigned long val)
-{
-	*uv_global_mmr32_address(pnode, offset) = val;
-}
-
-static inline unsigned long uv_read_global_mmr32(int pnode,
-						 unsigned long offset)
-{
-	return *uv_global_mmr32_address(pnode, offset);
-}
-
-/*
- * Access Global MMR space using the MMR space located at the top of physical
- * memory.
- */
-static inline unsigned long *uv_global_mmr64_address(int pnode,
-				unsigned long offset)
-{
-	return __va(UV_GLOBAL_MMR64_BASE |
-		    UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
-}
-
-static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
-				unsigned long val)
-{
-	*uv_global_mmr64_address(pnode, offset) = val;
-}
-
-static inline unsigned long uv_read_global_mmr64(int pnode,
-						 unsigned long offset)
-{
-	return *uv_global_mmr64_address(pnode, offset);
-}
-
-/*
- * Access hub local MMRs. Faster than using global space but only local MMRs
- * are accessible.
- */
-static inline unsigned long *uv_local_mmr_address(unsigned long offset)
-{
-	return __va(UV_LOCAL_MMR_BASE | offset);
-}
-
-static inline unsigned long uv_read_local_mmr(unsigned long offset)
-{
-	return *uv_local_mmr_address(offset);
-}
-
-static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
-{
-	*uv_local_mmr_address(offset) = val;
-}
-
-/*
- * Structures and definitions for converting between cpu, node, pnode, and blade
- * numbers.
- */
-
-/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
-static inline int uv_blade_processor_id(void)
-{
-	return smp_processor_id();
-}
-
-/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
-static inline int uv_numa_blade_id(void)
-{
-	return 0;
-}
-
-/* Convert a cpu number to the the UV blade number */
-static inline int uv_cpu_to_blade_id(int cpu)
-{
-	return 0;
-}
-
-/* Convert linux node number to the UV blade number */
-static inline int uv_node_to_blade_id(int nid)
-{
-	return 0;
-}
-
-/* Convert a blade id to the PNODE of the blade */
-static inline int uv_blade_to_pnode(int bid)
-{
-	return 0;
-}
-
-/* Determine the number of possible cpus on a blade */
-static inline int uv_blade_nr_possible_cpus(int bid)
-{
-	return num_possible_cpus();
-}
-
-/* Determine the number of online cpus on a blade */
-static inline int uv_blade_nr_online_cpus(int bid)
-{
-	return num_online_cpus();
-}
-
-/* Convert a cpu id to the PNODE of the blade containing the cpu */
-static inline int uv_cpu_to_pnode(int cpu)
-{
-	return 0;
-}
-
-/* Convert a linux node number to the PNODE of the blade */
-static inline int uv_node_to_pnode(int nid)
-{
-	return 0;
-}
-
-/* Maximum possible number of blades */
-static inline int uv_num_possible_blades(void)
-{
-	return 1;
-}
-
-#endif /* __ASM_IA64_UV_HUB__ */
-
diff --git a/include/asm-ia64/uv/uv_mmrs.h b/include/asm-ia64/uv/uv_mmrs.h
deleted file mode 100644
index 1cc1dbb0182f..000000000000
--- a/include/asm-ia64/uv/uv_mmrs.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV MMR definitions
- *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef __ASM_IA64_UV_MMRS__
-#define __ASM_IA64_UV_MMRS__
-
-/*
- *       AUTO GENERATED - Do not edit
- */
-
- #define UV_MMR_ENABLE		(1UL << 63)
-
-/* ========================================================================= */
-/*                               UVH_NODE_ID                                 */
-/* ========================================================================= */
-#define UVH_NODE_ID 0x0UL
-
-#define UVH_NODE_ID_FORCE1_SHFT 0
-#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
-#define UVH_NODE_ID_MANUFACTURER_SHFT 1
-#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
-#define UVH_NODE_ID_PART_NUMBER_SHFT 12
-#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
-#define UVH_NODE_ID_REVISION_SHFT 28
-#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
-#define UVH_NODE_ID_NODE_ID_SHFT 32
-#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
-#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
-#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
-#define UVH_NODE_ID_NI_PORT_SHFT 56
-#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
-
-union uvh_node_id_u {
-    unsigned long	v;
-    struct uvh_node_id_s {
-	unsigned long	force1        :  1;  /* RO */
-	unsigned long	manufacturer  : 11;  /* RO */
-	unsigned long	part_number   : 16;  /* RO */
-	unsigned long	revision      :  4;  /* RO */
-	unsigned long	node_id       : 15;  /* RW */
-	unsigned long	rsvd_47       :  1;  /*    */
-	unsigned long	nodes_per_bit :  7;  /* RW */
-	unsigned long	rsvd_55       :  1;  /*    */
-	unsigned long	ni_port       :  4;  /* RO */
-	unsigned long	rsvd_60_63    :  4;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
-/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
-
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
-union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
-	unsigned long	rsvd_0_23 : 24;  /*    */
-	unsigned long	dest_base : 22;  /* RW */
-	unsigned long	rsvd_46_63: 18;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR                  */
-/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
-
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
-union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
-	unsigned long	rsvd_0_23 : 24;  /*    */
-	unsigned long	dest_base : 22;  /* RW */
-	unsigned long	rsvd_46_63: 18;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR                  */
-/* ========================================================================= */
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
-
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
-#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
-union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
-	unsigned long	rsvd_0_23 : 24;  /*    */
-	unsigned long	dest_base : 22;  /* RW */
-	unsigned long	rsvd_46_63: 18;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
-/* ========================================================================= */
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
-
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 46
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0000400000000000UL
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_rh_gam_gru_overlay_config_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_gru_overlay_config_mmr_s {
-	unsigned long	rsvd_0_27: 28;  /*    */
-	unsigned long	base   : 18;  /* RW */
-	unsigned long	gr4    :  1;  /* RW */
-	unsigned long	rsvd_47_51:  5;  /*    */
-	unsigned long	n_gru  :  4;  /* RW */
-	unsigned long	rsvd_56_62:  7;  /*    */
-	unsigned long	enable :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                    UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR                      */
-/* ========================================================================= */
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
-
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_rh_gam_mmr_overlay_config_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_mmr_overlay_config_mmr_s {
-	unsigned long	rsvd_0_25: 26;  /*    */
-	unsigned long	base     : 20;  /* RW */
-	unsigned long	dual_hub :  1;  /* RW */
-	unsigned long	rsvd_47_62: 16;  /*    */
-	unsigned long	enable   :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                                 UVH_RTC                                   */
-/* ========================================================================= */
-#define UVH_RTC 0x28000UL
-
-#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
-#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
-
-union uvh_rtc_u {
-    unsigned long	v;
-    struct uvh_rtc_s {
-	unsigned long	real_time_clock : 56;  /* RW */
-	unsigned long	rsvd_56_63      :  8;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                          UVH_SI_ADDR_MAP_CONFIG                           */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
-
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
-    unsigned long	v;
-    struct uvh_si_addr_map_config_s {
-	unsigned long	m_skt :  6;  /* RW */
-	unsigned long	rsvd_6_7:  2;  /*    */
-	unsigned long	n_skt :  4;  /* RW */
-	unsigned long	rsvd_12_63: 52;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias0_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias1_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias2_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-
-#endif /* __ASM_IA64_UV_MMRS__ */
diff --git a/include/asm-ia64/vga.h b/include/asm-ia64/vga.h
deleted file mode 100644
index 02184ecd8208..000000000000
--- a/include/asm-ia64/vga.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *	Access to VGA videoram
- *
- *	(c) 1998 Martin Mares <mj@ucw.cz>
- *	(c) 1999 Asit Mallick <asit.k.mallick@intel.com>
- *	(c) 1999 Don Dugger <don.dugger@intel.com>
- */
-
-#ifndef __ASM_IA64_VGA_H_
-#define __ASM_IA64_VGA_H_
-
-/*
- * On the PC, we can just recalculate addresses and then access the
- * videoram directly without any black magic.
- */
-
-extern unsigned long vga_console_iobase;
-extern unsigned long vga_console_membase;
-
-#define VGA_MAP_MEM(x,s)	((unsigned long) ioremap_nocache(vga_console_membase + (x), s))
-
-#define vga_readb(x)	(*(x))
-#define vga_writeb(x,y)	(*(y) = (x))
-
-#endif /* __ASM_IA64_VGA_H_ */
diff --git a/include/asm-ia64/xor.h b/include/asm-ia64/xor.h
deleted file mode 100644
index 41fb8744d17a..000000000000
--- a/include/asm-ia64/xor.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-ia64/xor.h
- *
- * Optimized RAID-5 checksumming functions for IA-64.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *);
-extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *, unsigned long *);
-extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *, unsigned long *, unsigned long *);
-
-static struct xor_block_template xor_block_ia64 = {
-	.name =	"ia64",
-	.do_2 =	xor_ia64_2,
-	.do_3 =	xor_ia64_3,
-	.do_4 =	xor_ia64_4,
-	.do_5 =	xor_ia64_5,
-};
-
-#define XOR_TRY_TEMPLATES	xor_speed(&xor_block_ia64)
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
deleted file mode 100644
index 1e7f6474d130..000000000000
--- a/include/asm-m32r/ide.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _ASM_M32R_IDE_H
-#define _ASM_M32R_IDE_H
-
-/*
- *  linux/include/asm-m32r/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the i386 architecture specific IDE code.
- */
-
-#ifdef __KERNEL__
-
-#include <asm/m32r.h>
-
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	2
-# endif
-#endif
-
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) \
-	|| defined(CONFIG_PLAT_OPSPUT)
-		case 0x1f0: return PLD_IRQ_CFIREQ;
-		default:
-			return 0;
-#elif defined(CONFIG_PLAT_MAPPI3)
-		case 0x1f0: return PLD_IRQ_CFIREQ;
-		case 0x170: return PLD_IRQ_IDEIREQ;
-		default:
-			return 0;
-#else
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		case 0x1e0: return 8;
-		case 0x160: return 12;
-		default:
-			return 0;
-#endif
-	}
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	switch (index) {
-		case 0:	return 0x1f0;
-		case 1:	return 0x170;
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		case 4: return 0x1e0;
-		case 5: return 0x160;
-		default:
-			return 0;
-	}
-}
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_IDE_H */
diff --git a/include/asm-m32r/kvm.h b/include/asm-m32r/kvm.h
deleted file mode 100644
index 99a40515b77e..000000000000
--- a/include/asm-m32r/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M32R_H
-#define __LINUX_KVM_M32R_H
-
-/* m32r does not support KVM */
-
-#endif
diff --git a/include/asm-m32r/namei.h b/include/asm-m32r/namei.h
deleted file mode 100644
index 210f8056b805..000000000000
--- a/include/asm-m32r/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_M32R_NAMEI_H
-#define _ASM_M32R_NAMEI_H
-
-/*
- * linux/include/asm-m32r/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_M32R_NAMEI_H */
diff --git a/include/asm-m32r/page.h b/include/asm-m32r/page.h
index 8a677f3fca68..c9333089fe11 100644
--- a/include/asm-m32r/page.h
+++ b/include/asm-m32r/page.h
@@ -41,9 +41,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 /*
  * This handles the memory map.. We could make this a config
  * option, but too many people screw it up, and too few need
diff --git a/include/asm-m32r/semaphore.h b/include/asm-m32r/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-m32r/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-m32r/thread_info.h b/include/asm-m32r/thread_info.h
index 1effcd0f5e63..8589d462df27 100644
--- a/include/asm-m32r/thread_info.h
+++ b/include/asm-m32r/thread_info.h
@@ -94,6 +94,8 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
diff --git a/include/asm-m68k/amigahw.h b/include/asm-m68k/amigahw.h
index a16fe4e5a28a..5ca5dd951a4a 100644
--- a/include/asm-m68k/amigahw.h
+++ b/include/asm-m68k/amigahw.h
@@ -22,8 +22,6 @@
      *  Different Amiga models
      */
 
-extern unsigned long amiga_model;
-
 #define AMI_UNKNOWN	(0)
 #define AMI_500		(1)
 #define AMI_500PLUS	(2)
@@ -59,11 +57,9 @@ extern unsigned long amiga_chipset;
      */
 
 extern unsigned long amiga_eclock;	/* 700 kHz E Peripheral Clock */
-extern unsigned long amiga_masterclock;	/* 28 MHz Master Clock */
 extern unsigned long amiga_colorclock;	/* 3.5 MHz Color Clock */
 extern unsigned long amiga_chip_size;	/* Chip RAM Size (bytes) */
 extern unsigned char amiga_vblank;	/* VBLANK Frequency */
-extern unsigned char amiga_psfreq;	/* Power Supply Frequency */
 
 
 #define AMIGAHW_DECLARE(name)	unsigned name : 1
diff --git a/include/asm-m68k/amigaints.h b/include/asm-m68k/amigaints.h
index 7c8713468fd2..b1bcdb835ab9 100644
--- a/include/asm-m68k/amigaints.h
+++ b/include/asm-m68k/amigaints.h
@@ -98,6 +98,8 @@
 #define CIA_ICR_ALL	0x1f
 #define CIA_ICR_SETCLR	0x80
 
+extern void amiga_init_IRQ(void);
+
 /* to access the interrupt control registers of CIA's use only
 ** these functions, they behave exactly like the amiga os routines
 */
diff --git a/include/asm-m68k/apollodma.h b/include/asm-m68k/apollodma.h
index 6821e3ba32e9..954adc851adb 100644
--- a/include/asm-m68k/apollodma.h
+++ b/include/asm-m68k/apollodma.h
@@ -1,4 +1,4 @@
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+/*
  * linux/include/asm/dma.h: Defines for using and allocating dma channels.
  * Written by Hennus Bergman, 1992.
  * High DMA channel support & info by Hannu Savolainen
diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h
index 1e233e7d191e..d1ea750bddfe 100644
--- a/include/asm-m68k/contregs.h
+++ b/include/asm-m68k/contregs.h
@@ -1,4 +1,53 @@
 #ifndef _M68K_CONTREGS_H
 #define _M68K_CONTREGS_H
-#include <asm-sparc/contregs.h>
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
 #endif /* _M68K_CONTREGS_H */
diff --git a/include/asm-m68k/dma-mapping.h b/include/asm-m68k/dma-mapping.h
index a26cdeb46a57..91f7944333d4 100644
--- a/include/asm-m68k/dma-mapping.h
+++ b/include/asm-m68k/dma-mapping.h
@@ -84,7 +84,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *s
 {
 }
 
-static inline int dma_mapping_error(dma_addr_t handle)
+static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
 {
 	return 0;
 }
diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h
index e1112de5a5e3..890bbf7e7758 100644
--- a/include/asm-m68k/dvma.h
+++ b/include/asm-m68k/dvma.h
@@ -1,4 +1,4 @@
-/* $Id: dvma.h,v 1.4 1999/03/27 20:23:41 tsbogend Exp $
+/*
  * include/asm-m68k/dma.h
  *
  * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
@@ -13,7 +13,7 @@
 #define DVMA_PAGE_SHIFT	13
 #define DVMA_PAGE_SIZE	(1UL << DVMA_PAGE_SHIFT)
 #define DVMA_PAGE_MASK	(~(DVMA_PAGE_SIZE-1))
-#define DVMA_PAGE_ALIGN(addr)	(((addr)+DVMA_PAGE_SIZE-1)&DVMA_PAGE_MASK)
+#define DVMA_PAGE_ALIGN(addr)	ALIGN(addr, DVMA_PAGE_SIZE)
 
 extern void dvma_init(void);
 extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
@@ -63,8 +63,6 @@ static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr,
 	return 0;
 }
 
-extern unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr);
-
 #else /* Sun3x */
 
 /* sun3x dvma page support */
diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h
index c17edf8c7bc4..b9215a0907d3 100644
--- a/include/asm-m68k/fbio.h
+++ b/include/asm-m68k/fbio.h
@@ -1 +1,330 @@
-#include <asm-sparc/fbio.h>
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+#define FBTYPE_PCI_GENERIC	1000
+#define FBTYPE_PCI_MACH64	1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+	int             index;          /* first element (0 origin) */
+	int             count;
+	u32		red;
+	u32		green;
+	u32		blue;
+};
+
+#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+	short set;		/* what to set, choose from the list above */
+	short enable;		/* cursor on/off */
+	struct fbcurpos pos;	/* cursor position */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fbcmap32 cmap;	/* color map info */
+	struct fbcurpos size;	/* cursor bit map size */
+	u32	image;		/* cursor image bits */
+	u32	mask;		/* cursor mask bits */
+};
+
+#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-m68k/fpu.h b/include/asm-m68k/fpu.h
index 59701d7b4e78..ffb6b8cfc6d5 100644
--- a/include/asm-m68k/fpu.h
+++ b/include/asm-m68k/fpu.h
@@ -7,15 +7,15 @@
  */
 
 #if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#define FPSTATESIZE (216/sizeof(unsigned char))
+#define FPSTATESIZE (216)
 #elif defined(CONFIG_M68040)
-#define FPSTATESIZE (96/sizeof(unsigned char))
+#define FPSTATESIZE (96)
 #elif defined(CONFIG_M68KFPU_EMU)
-#define FPSTATESIZE (28/sizeof(unsigned char))
+#define FPSTATESIZE (28)
 #elif defined(CONFIG_M68060)
-#define FPSTATESIZE (12/sizeof(unsigned char))
+#define FPSTATESIZE (12)
 #else
-#define FPSTATESIZE error no_cpu_type_configured
+#define FPSTATESIZE (0)
 #endif
 
 #endif /* __M68K_FPU_H */
diff --git a/include/asm-m68k/ide.h b/include/asm-m68k/ide.h
index 909c6dfd3851..1daf6cbdd9f0 100644
--- a/include/asm-m68k/ide.h
+++ b/include/asm-m68k/ide.h
@@ -45,10 +45,6 @@
 #include <asm/macints.h>
 #endif
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS	4	/* same as the other archs */
-#endif
-
 /*
  * Get rid of defs from io.h - ide has its private and conflicting versions
  * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h
index 4349eaf3cfe4..160616a89e05 100644
--- a/include/asm-m68k/idprom.h
+++ b/include/asm-m68k/idprom.h
@@ -1,6 +1,25 @@
 #ifndef _M68K_IDPROM_H
 #define _M68K_IDPROM_H
-#include <asm-sparc/idprom.h>
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/types.h>
+
+struct idprom {
+	u8		id_format;	/* Format identifier (always 0x01) */
+	u8		id_machtype;	/* Machine type */
+	u8		id_ethaddr[6];	/* Hardware ethernet address */
+	s32		id_date;	/* Date of manufacture */
+	u32		id_sernum:24;	/* Unique serial number */
+	u8		id_cksum;	/* Checksum - xor of the data bytes */
+	u8		reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
 
 /* Sun3: in control space */
 #define SUN3_IDPROM_BASE	0x00000000
diff --git a/include/asm-m68k/irq.h b/include/asm-m68k/irq.h
index eb29a5260591..226bfc0f21b1 100644
--- a/include/asm-m68k/irq.h
+++ b/include/asm-m68k/irq.h
@@ -24,7 +24,7 @@
 #elif defined(CONFIG_HP300)
 #define NR_IRQS	8
 #else
-#error unknown nr of irqs
+#define NR_IRQS	0
 #endif
 
 /*
diff --git a/include/asm-m68k/kvm.h b/include/asm-m68k/kvm.h
deleted file mode 100644
index 7ed27fce5240..000000000000
--- a/include/asm-m68k/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M68K_H
-#define __LINUX_KVM_M68K_H
-
-/* m68k does not support KVM */
-
-#endif
diff --git a/include/asm-m68k/mac_baboon.h b/include/asm-m68k/mac_baboon.h
index e87850830be8..c2a042b8c349 100644
--- a/include/asm-m68k/mac_baboon.h
+++ b/include/asm-m68k/mac_baboon.h
@@ -29,6 +29,4 @@ struct baboon {
 				 */
 };
 
-extern volatile struct baboon *baboon;
-
 #endif /* __ASSEMBLY **/
diff --git a/include/asm-m68k/mac_via.h b/include/asm-m68k/mac_via.h
index 59b758cd16ad..39afb438b656 100644
--- a/include/asm-m68k/mac_via.h
+++ b/include/asm-m68k/mac_via.h
@@ -253,7 +253,6 @@
 
 extern volatile __u8 *via1,*via2;
 extern int rbv_present,via_alt_mapping;
-extern __u8 rbv_clear;
 
 static inline int rbv_set_video_bpp(int bpp)
 {
diff --git a/include/asm-m68k/machines.h b/include/asm-m68k/machines.h
index da6015a90f24..be667e84f01b 100644
--- a/include/asm-m68k/machines.h
+++ b/include/asm-m68k/machines.h
@@ -1,4 +1,4 @@
-/* $Id: machines.h,v 1.4 1995/11/25 02:31:58 davem Exp $
+/*
  * machines.h:  Defines for taking apart the machine type value in the
  *              idprom and determining the kind of machine we are on.
  *
@@ -21,8 +21,6 @@ struct Sun_Machine_Models {
 //#define NUM_SUN_MACHINES   23
 #define NUM_SUN_MACHINES  8
 
-extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
-
 /* The machine type in the idprom area looks like this:
  *
  * ---------------
diff --git a/include/asm-m68k/macintosh.h b/include/asm-m68k/macintosh.h
index 28b0f49ee521..05309f7e3d06 100644
--- a/include/asm-m68k/macintosh.h
+++ b/include/asm-m68k/macintosh.h
@@ -12,8 +12,6 @@ extern void mac_reset(void);
 extern void mac_poweroff(void);
 extern void mac_init_IRQ(void);
 extern int mac_irq_pending(unsigned int);
-extern void mac_identify(void);
-extern void mac_report_hardware(void);
 
 /*
  *	Floppy driver magic hook - probably shouldnt be here
@@ -21,9 +19,6 @@ extern void mac_report_hardware(void);
 
 extern void via1_set_head(int);
 
-extern void parse_booter(char *ptr);
-extern void print_booter(char *ptr);
-
 /*
  *	Macintosh Table
  */
diff --git a/include/asm-m68k/md.h b/include/asm-m68k/md.h
index 467ea08383e4..d2f78f226f3d 100644
--- a/include/asm-m68k/md.h
+++ b/include/asm-m68k/md.h
@@ -1,4 +1,4 @@
-/* $Id: md.h,v 1.1 1997/12/15 15:12:04 jj Exp $
+/*
  * md.h: High speed xor_block operation for RAID4/5
  *
  */
diff --git a/include/asm-m68k/namei.h b/include/asm-m68k/namei.h
deleted file mode 100644
index f33f243b644a..000000000000
--- a/include/asm-m68k/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-m68k/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __M68K_NAMEI_H
-#define __M68K_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif
diff --git a/include/asm-m68k/openprom.h b/include/asm-m68k/openprom.h
index 869ab9176e9f..d33cdadf78e1 100644
--- a/include/asm-m68k/openprom.h
+++ b/include/asm-m68k/openprom.h
@@ -1,4 +1,3 @@
-/* $Id: openprom.h,v 1.19 1996/09/25 03:51:08 davem Exp $ */
 #ifndef __SPARC_OPENPROM_H
 #define __SPARC_OPENPROM_H
 
diff --git a/include/asm-m68k/oplib.h b/include/asm-m68k/oplib.h
index 06caa2d08451..f082d03336bd 100644
--- a/include/asm-m68k/oplib.h
+++ b/include/asm-m68k/oplib.h
@@ -1,4 +1,4 @@
-/* $Id: oplib.h,v 1.12 1996/10/31 06:29:13 davem Exp $
+/*
  * oplib.h:  Describes the interface and available routines in the
  *           Linux Prom library.
  *
@@ -19,7 +19,6 @@ enum prom_major_version {
 	PROM_V2,      /* sun4c and early sun4m V2 prom */
 	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
 	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
-        PROM_AP1000,  /* actually no prom at all */
 };
 
 extern enum prom_major_version prom_vers;
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 880c2cbff8a6..a34b8bad7847 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -103,9 +103,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 #endif /* !__ASSEMBLY__ */
 
 #include <asm/page_offset.h>
diff --git a/include/asm-m68k/sbus.h b/include/asm-m68k/sbus.h
index 3b25c0040aa6..bfe3ba147f2e 100644
--- a/include/asm-m68k/sbus.h
+++ b/include/asm-m68k/sbus.h
@@ -12,11 +12,6 @@ struct sbus_dev {
 	} reg_addrs[1];
 };
 
-extern void *sparc_alloc_io (u32, void *, int, char *, u32, int);
-#define sparc_alloc_io(a,b,c,d,e,f)	(a)
-
-#define ARCH_SUN4  0
-
 /* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
 /* No SBUS on the Sun3, kludge -- sam */
 
diff --git a/include/asm-m68k/semaphore.h b/include/asm-m68k/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-m68k/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-m68k/sun3-head.h b/include/asm-m68k/sun3-head.h
index e74f384e269f..05af2f18b3bd 100644
--- a/include/asm-m68k/sun3-head.h
+++ b/include/asm-m68k/sun3-head.h
@@ -1,4 +1,3 @@
-/* $Id: head.h,v 1.32 1996/12/04 00:12:48 ecd Exp $ */
 #ifndef __SUN3_HEAD_H
 #define __SUN3_HEAD_H
 
diff --git a/include/asm-m68k/thread_info.h b/include/asm-m68k/thread_info.h
index d635a3752488..abc002798a2b 100644
--- a/include/asm-m68k/thread_info.h
+++ b/include/asm-m68k/thread_info.h
@@ -25,13 +25,7 @@ struct thread_info {
 }
 
 /* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
-#if PAGE_SHIFT == 13 /* 8k machines */
-#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,0))
-#define free_thread_info(ti)  free_pages((unsigned long)(ti),0)
-#else /* otherwise assume 4k pages */
-#define alloc_thread_info(tsk)   ((struct thread_info *)__get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti)  free_pages((unsigned long)(ti),1)
-#endif /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
 
 #define init_thread_info	(init_task.thread.info)
 #define init_stack		(init_thread_union.stack)
diff --git a/include/asm-m68k/tlbflush.h b/include/asm-m68k/tlbflush.h
index 17707ec315e2..acb6bf21a321 100644
--- a/include/asm-m68k/tlbflush.h
+++ b/include/asm-m68k/tlbflush.h
@@ -16,7 +16,7 @@ static inline void flush_tlb_kernel_page(void *addr)
 				     ".chip 68k"
 				     : : "a" (addr));
 		set_fs(old_fs);
-	} else
+	} else if (CPU_IS_020_OR_030)
 		__asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr));
 }
 
@@ -29,7 +29,7 @@ static inline void __flush_tlb(void)
 		__asm__ __volatile__(".chip 68040\n\t"
 				     "pflushan\n\t"
 				     ".chip 68k");
-	else
+	else if (CPU_IS_020_OR_030)
 		__asm__ __volatile__("pflush #0,#4");
 }
 
@@ -45,7 +45,7 @@ static inline void __flush_tlb_one(unsigned long addr)
 {
 	if (CPU_IS_040_OR_060)
 		__flush_tlb040_one(addr);
-	else
+	else if (CPU_IS_020_OR_030)
 		__asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
 }
 
@@ -60,7 +60,7 @@ static inline void flush_tlb_all(void)
 		__asm__ __volatile__(".chip 68040\n\t"
 				     "pflusha\n\t"
 				     ".chip 68k");
-	else
+	else if (CPU_IS_020_OR_030)
 		__asm__ __volatile__("pflusha");
 }
 
diff --git a/include/asm-m68knommu/Kbuild b/include/asm-m68knommu/Kbuild
deleted file mode 100644
index c68e1680da01..000000000000
--- a/include/asm-m68knommu/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-include include/asm-generic/Kbuild.asm
diff --git a/include/asm-m68knommu/MC68328.h b/include/asm-m68knommu/MC68328.h
deleted file mode 100644
index a337e56d09bf..000000000000
--- a/include/asm-m68knommu/MC68328.h
+++ /dev/null
@@ -1,1266 +0,0 @@
-
-/* include/asm-m68knommu/MC68328.h: '328 control registers
- *
- * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
- *                     Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68328_H_
-#define _MC68328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Mask Revision Register
- */
-#define MRR_ADDR 0xfffff004
-#define MRR      LONG_REF(MRR_ADDR)
- 
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * Group Base Address Registers
- */
-#define GRPBASEA_ADDR	0xfffff100
-#define GRPBASEB_ADDR	0xfffff102
-#define GRPBASEC_ADDR	0xfffff104
-#define GRPBASED_ADDR	0xfffff106
-
-#define GRPBASEA	WORD_REF(GRPBASEA_ADDR)
-#define GRPBASEB	WORD_REF(GRPBASEB_ADDR)
-#define GRPBASEC	WORD_REF(GRPBASEC_ADDR)
-#define GRPBASED	WORD_REF(GRPBASED_ADDR)
-
-#define GRPBASE_V	  0x0001	/* Valid */
-#define GRPBASE_GBA_MASK  0xfff0	/* Group Base Address (bits 31-20) */
-
-/*
- * Group Base Address Mask Registers 
- */
-#define GRPMASKA_ADDR	0xfffff108
-#define GRPMASKB_ADDR	0xfffff10a
-#define GRPMASKC_ADDR	0xfffff10c
-#define GRPMASKD_ADDR	0xfffff10e
-
-#define GRPMASKA	WORD_REF(GRPMASKA_ADDR)
-#define GRPMASKB	WORD_REF(GRPMASKB_ADDR)
-#define GRPMASKC	WORD_REF(GRPMASKC_ADDR)
-#define GRPMASKD	WORD_REF(GRPMASKD_ADDR)
-
-#define GRMMASK_GMA_MASK 0xfffff0	/* Group Base Mask (bits 31-20) */
-
-/*
- * Chip-Select Option Registers (group A)
- */
-#define CSA0_ADDR	0xfffff110
-#define CSA1_ADDR	0xfffff114
-#define CSA2_ADDR	0xfffff118
-#define CSA3_ADDR	0xfffff11c
-
-#define CSA0		LONG_REF(CSA0_ADDR)
-#define CSA1		LONG_REF(CSA1_ADDR)
-#define CSA2		LONG_REF(CSA2_ADDR)
-#define CSA3		LONG_REF(CSA3_ADDR)
-
-#define CSA_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSA_WAIT_SHIFT	0
-#define CSA_RO		0x00000008	/* Read-Only */
-#define CSA_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
-#define CSA_AM_SHIFT	8
-#define CSA_BUSW	0x00010000	/* Bus Width Select */
-#define CSA_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
-#define CSA_AC_SHIFT	24
-
-/*
- * Chip-Select Option Registers (group B)
- */
-#define CSB0_ADDR	0xfffff120
-#define CSB1_ADDR	0xfffff124
-#define CSB2_ADDR	0xfffff128
-#define CSB3_ADDR	0xfffff12c
-
-#define CSB0		LONG_REF(CSB0_ADDR)
-#define CSB1		LONG_REF(CSB1_ADDR)
-#define CSB2		LONG_REF(CSB2_ADDR)
-#define CSB3		LONG_REF(CSB3_ADDR)
-
-#define CSB_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSB_WAIT_SHIFT	0
-#define CSB_RO		0x00000008	/* Read-Only */
-#define CSB_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
-#define CSB_AM_SHIFT	8
-#define CSB_BUSW	0x00010000	/* Bus Width Select */
-#define CSB_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
-#define CSB_AC_SHIFT	24
-
-/*
- * Chip-Select Option Registers (group C)
- */
-#define CSC0_ADDR	0xfffff130
-#define CSC1_ADDR	0xfffff134
-#define CSC2_ADDR	0xfffff138
-#define CSC3_ADDR	0xfffff13c
-
-#define CSC0		LONG_REF(CSC0_ADDR)
-#define CSC1		LONG_REF(CSC1_ADDR)
-#define CSC2		LONG_REF(CSC2_ADDR)
-#define CSC3		LONG_REF(CSC3_ADDR)
-
-#define CSC_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSC_WAIT_SHIFT	0
-#define CSC_RO		0x00000008	/* Read-Only */
-#define CSC_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
-#define CSC_AM_SHIFT	4
-#define CSC_BUSW	0x00010000	/* Bus Width Select */
-#define CSC_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
-#define CSC_AC_SHIFT	20
-
-/*
- * Chip-Select Option Registers (group D)
- */
-#define CSD0_ADDR	0xfffff140
-#define CSD1_ADDR	0xfffff144
-#define CSD2_ADDR	0xfffff148
-#define CSD3_ADDR	0xfffff14c
-
-#define CSD0		LONG_REF(CSD0_ADDR)
-#define CSD1		LONG_REF(CSD1_ADDR)
-#define CSD2		LONG_REF(CSD2_ADDR)
-#define CSD3		LONG_REF(CSD3_ADDR)
-
-#define CSD_WAIT_MASK	0x00000007	/* Wait State Selection */
-#define CSD_WAIT_SHIFT	0
-#define CSD_RO		0x00000008	/* Read-Only */
-#define CSD_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
-#define CSD_AM_SHIFT	4
-#define CSD_BUSW	0x00010000	/* Bus Width Select */
-#define CSD_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
-#define CSD_AC_SHIFT	20
-
-/**********
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
- 
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_PIXCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_PIXCLK_SEL_SHIFT 11
-
-/* 'EZ328-compatible definitions */
-#define PLLCR_LCDCLK_SEL_MASK	PLLCR_PIXCLK_SEL_MASK
-#define PLLCR_LCDCLK_SEL_SHIFT	PLLCR_PIXCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_STOP		0x40	/* Enter power-save mode immediately */ 
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADRR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
- 
-/*
- * Define the names for bit positions first. This is useful for
- * request_irq
- */
-#define SPIM_IRQ_NUM	0	/* SPI Master interrupt */
-#define	TMR2_IRQ_NUM	1	/* Timer 2 interrupt */
-#define UART_IRQ_NUM	2	/* UART interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define	INT4_IRQ_NUM	12	/* External INT4 */
-#define	INT5_IRQ_NUM	13	/* External INT5 */
-#define	INT6_IRQ_NUM	14	/* External INT6 */
-#define	INT7_IRQ_NUM	15	/* External INT7 */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define PEN_IRQ_NUM	20	/* Pen Interrupt */
-#define SPIS_IRQ_NUM	21	/* SPI Slave Interrupt */
-#define TMR1_IRQ_NUM	22	/* Timer 1 interrupt */
-#define IRQ7_IRQ_NUM	23	/* IRQ7 */
-
-/* '328-compatible definitions */
-#define SPI_IRQ_NUM	SPIM_IRQ_NUM
-#define TMR_IRQ_NUM	TMR1_IRQ_NUM
- 
-/*
- * Here go the bitmasks themselves
- */
-#define IMR_MSPIM 	(1 << SPIM _IRQ_NUM)	/* Mask SPI Master interrupt */
-#define	IMR_MTMR2	(1 << TMR2_IRQ_NUM)	/* Mask Timer 2 interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define	IMR_MINT4	(1 << INT4_IRQ_NUM)	/* Mask External INT4 */
-#define	IMR_MINT5	(1 << INT5_IRQ_NUM)	/* Mask External INT5 */
-#define	IMR_MINT6	(1 << INT6_IRQ_NUM)	/* Mask External INT6 */
-#define	IMR_MINT7	(1 << INT7_IRQ_NUM)	/* Mask External INT7 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MPEN	(1 << PEN_IRQ_NUM)	/* Mask Pen Interrupt */
-#define IMR_MSPIS	(1 << SPIS_IRQ_NUM)	/* Mask SPI Slave Interrupt */
-#define IMR_MTMR1	(1 << TMR1_IRQ_NUM)	/* Mask Timer 1 interrupt */
-#define IMR_MIRQ7	(1 << IRQ7_IRQ_NUM)	/* Mask IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IMR_MSPI	IMR_MSPIM
-#define IMR_MTMR	IMR_MTMR1
-
-/* 
- * Interrupt Wake-Up Enable Register
- */
-#define IWR_ADDR	0xfffff308
-#define IWR		LONG_REF(IWR_ADDR)
-
-#define IWR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	IWR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define IWR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IWR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IWR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IWR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IWR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	IWR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IWR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IWR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IWR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	IWR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	IWR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	IWR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	IWR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define IWR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IWR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IWR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IWR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IWR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define IWR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define IWR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define IWR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	ISR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	ISR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	ISR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	ISR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	ISR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define ISR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define ISR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define ISR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define ISR_SPI	ISR_SPIM
-#define ISR_TMR	ISR_TMR1
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff310
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
-#define	IPR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define	IPR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
-#define	IPR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
-#define	IPR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
-#define	IPR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
-#define IPR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
-#define IPR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
-#define IPR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
-
-/* 'EZ328-compatible definitions */
-#define IPR_SPI	IPR_SPIM
-#define IPR_TMR	IPR_TMR1
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PASEL_ADDR	0xfffff403		/* Port A Select register */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PASEL		BYTE_REF(PASEL_ADDR)
-
-#define PA(x)           (1 << (x))
-#define PA_A(x)		PA((x) - 16)	/* This is specific to PA only! */
-
-#define PA_A16		PA(0)		/* Use A16 as PA(0) */
-#define PA_A17		PA(1)		/* Use A17 as PA(1) */
-#define PA_A18		PA(2)		/* Use A18 as PA(2) */
-#define PA_A19		PA(3)		/* Use A19 as PA(3) */
-#define PA_A20		PA(4)		/* Use A20 as PA(4) */
-#define PA_A21		PA(5)		/* Use A21 as PA(5) */
-#define PA_A22		PA(6)		/* Use A22 as PA(6) */
-#define PA_A23		PA(7)		/* Use A23 as PA(7) */
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)           (1 << (x))
-#define PB_D(x)		PB(x)		/* This is specific to port B only */
-
-#define PB_D0		PB(0)		/* Use D0 as PB(0) */
-#define PB_D1		PB(1)		/* Use D1 as PB(1) */
-#define PB_D2		PB(2)		/* Use D2 as PB(2) */
-#define PB_D3		PB(3)		/* Use D3 as PB(3) */
-#define PB_D4		PB(4)		/* Use D4 as PB(4) */
-#define PB_D5		PB(5)		/* Use D5 as PB(5) */
-#define PB_D6		PB(6)		/* Use D6 as PB(6) */
-#define PB_D7		PB(7)		/* Use D7 as PB(7) */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)           (1 << (x))
-
-#define PC_WE		PC(6)		/* Use WE    as PC(6) */
-#define PC_DTACK	PC(5)		/* Use DTACK as PC(5) */
-#define PC_IRQ7		PC(4)		/* Use IRQ7  as PC(4) */
-#define PC_LDS		PC(2)		/* Use LDS   as PC(2) */
-#define PC_UDS		PC(1)		/* Use UDS   as PC(1) */
-#define PC_MOCLK	PC(0)		/* Use MOCLK as PC(0) */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)           (1 << (x))
-#define PD_KB(x)	PD(x)		/* This is specific for Port D only */
-
-#define PD_KB0		PD(0)	/* Use KB0 as PD(0) */
-#define PD_KB1		PD(1)	/* Use KB1 as PD(1) */
-#define PD_KB2		PD(2)	/* Use KB2 as PD(2) */
-#define PD_KB3		PD(3)	/* Use KB3 as PD(3) */
-#define PD_KB4		PD(4)	/* Use KB4 as PD(4) */
-#define PD_KB5		PD(5)	/* Use KB5 as PD(5) */
-#define PD_KB6		PD(6)	/* Use KB6 as PD(6) */
-#define PD_KB7		PD(7)	/* Use KB7 as PD(7) */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)           (1 << (x))
-
-#define PE_CSA1		PE(1)	/* Use CSA1 as PE(1) */
-#define PE_CSA2		PE(2)	/* Use CSA2 as PE(2) */
-#define PE_CSA3		PE(3)	/* Use CSA3 as PE(3) */
-#define PE_CSB0		PE(4)	/* Use CSB0 as PE(4) */
-#define PE_CSB1		PE(5)	/* Use CSB1 as PE(5) */
-#define PE_CSB2		PE(6)	/* Use CSB2 as PE(6) */
-#define PE_CSB3		PE(7)	/* Use CSB3 as PE(7) */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)           (1 << (x))
-#define PF_A(x)		PF((x) - 24)	/* This is Port F specific only */
-
-#define PF_A24		PF(0)	/* Use A24 as PF(0) */
-#define PF_A25		PF(1)	/* Use A25 as PF(1) */
-#define PF_A26		PF(2)	/* Use A26 as PF(2) */
-#define PF_A27		PF(3)	/* Use A27 as PF(3) */
-#define PF_A28		PF(4)	/* Use A28 as PF(4) */
-#define PF_A29		PF(5)	/* Use A29 as PF(5) */
-#define PF_A30		PF(6)	/* Use A30 as PF(6) */
-#define PF_A31		PF(7)	/* Use A31 as PF(7) */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)           (1 << (x))
-
-#define PG_UART_TXD	PG(0)	/* Use UART_TXD as PG(0) */
-#define PG_UART_RXD	PG(1)	/* Use UART_RXD as PG(1) */
-#define PG_PWMOUT	PG(2)	/* Use PWMOUT   as PG(2) */
-#define PG_TOUT2	PG(3)   /* Use TOUT2    as PG(3) */
-#define PG_TIN2		PG(4)	/* Use TIN2     as PG(4) */
-#define PG_TOUT1	PG(5)   /* Use TOUT1    as PG(5) */
-#define PG_TIN1		PG(6)	/* Use TIN1     as PG(6) */
-#define PG_RTCOUT	PG(7)	/* Use RTCOUT   as PG(7) */
-
-/* 
- * Port J
- */
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJSEL_ADDR	0xfffff43b		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)           (1 << (x)) 
-
-#define PJ_CSD3		PJ(7)	/* Use CSD3 as PJ(7) */
-
-/* 
- * Port K
- */
-#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
-#define PKDATA_ADDR	0xfffff441		/* Port K data register */
-#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enable reg */
-#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
-
-#define PKDIR		BYTE_REF(PKDIR_ADDR)
-#define PKDATA		BYTE_REF(PKDATA_ADDR)
-#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
-#define PKSEL		BYTE_REF(PKSEL_ADDR)
-
-#define PK(x)           (1 << (x))
-
-/* 
- * Port M
- */
-#define PMDIR_ADDR	0xfffff438		/* Port M direction reg */
-#define PMDATA_ADDR	0xfffff439		/* Port M data register */
-#define PMPUEN_ADDR	0xfffff43a		/* Port M Pull-Up enable reg */
-#define PMSEL_ADDR	0xfffff43b		/* Port M Select Register */
-
-#define PMDIR		BYTE_REF(PMDIR_ADDR)
-#define PMDATA		BYTE_REF(PMDATA_ADDR)
-#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
-#define PMSEL		BYTE_REF(PMSEL_ADDR)
-
-#define PM(x)           (1 << (x))
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register 
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0007	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_PWMEN		0x0010	/* Enable PWM */
-#define PMNC_POL		0x0020	/* PWM Output Bit Polarity */
-#define PWMC_PIN		0x0080	/* Current PWM output pin status */
-#define PWMC_LOAD		0x0100	/* Force a new period */
-#define PWMC_IRQEN		0x4000	/* Interrupt Request Enable */
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* 'EZ328-compatible definitions */
-#define PWMC_EN	PWMC_PWMEN
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff502
-#define PWMP		WORD_REF(PWMP_ADDR)
-
-/* 
- * PWM Width Register 
- */
-#define PWMW_ADDR	0xfffff504
-#define PWMW		WORD_REF(PWMW_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff506
-#define PWMCNT		WORD_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timers
- *
- **********/
-
-/* 
- * Timer Unit 1 and 2 Control Registers
- */
-#define TCTL1_ADDR	0xfffff600
-#define TCTL1		WORD_REF(TCTL1_ADDR)
-#define TCTL2_ADDR	0xfffff60c
-#define TCTL2		WORD_REF(TCTL2_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* 'EZ328-compatible definitions */
-#define TCTL_ADDR	TCTL1_ADDR
-#define TCTL		TCTL1
-
-/*
- * Timer Unit 1 and 2 Prescaler Registers
- */
-#define TPRER1_ADDR	0xfffff602
-#define TPRER1		WORD_REF(TPRER1_ADDR)
-#define TPRER2_ADDR	0xfffff60e
-#define TPRER2		WORD_REF(TPRER2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TPRER_ADDR	TPRER1_ADDR
-#define TPRER		TPRER1
-
-/*
- * Timer Unit 1 and 2 Compare Registers
- */
-#define TCMP1_ADDR	0xfffff604
-#define TCMP1		WORD_REF(TCMP1_ADDR)
-#define TCMP2_ADDR	0xfffff610
-#define TCMP2		WORD_REF(TCMP2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCMP_ADDR	TCMP1_ADDR
-#define TCMP		TCMP1
-
-/*
- * Timer Unit 1 and 2 Capture Registers
- */
-#define TCR1_ADDR	0xfffff606
-#define TCR1		WORD_REF(TCR1_ADDR)
-#define TCR2_ADDR	0xfffff612
-#define TCR2		WORD_REF(TCR2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCR_ADDR	TCR1_ADDR
-#define TCR		TCR1
-
-/*
- * Timer Unit 1 and 2 Counter Registers
- */
-#define TCN1_ADDR	0xfffff608
-#define TCN1		WORD_REF(TCN1_ADDR)
-#define TCN2_ADDR	0xfffff614
-#define TCN2		WORD_REF(TCN2_ADDR)
-
-/* 'EZ328-compatible definitions */
-#define TCN_ADDR	TCN1_ADDR
-#define TCN		TCN
-
-/*
- * Timer Unit 1 and 2 Status Registers
- */
-#define TSTAT1_ADDR	0xfffff60a
-#define TSTAT1		WORD_REF(TSTAT1_ADDR)
-#define TSTAT2_ADDR	0xfffff616
-#define TSTAT2		WORD_REF(TSTAT2_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* 'EZ328-compatible definitions */
-#define TSTAT_ADDR	TSTAT1_ADDR
-#define TSTAT		TSTAT1
-
-/*
- * Watchdog Compare Register 
- */
-#define WRR_ADDR	0xfffff61a
-#define WRR		WORD_REF(WRR_ADDR)
-
-/*
- * Watchdog Counter Register 
- */
-#define WCN_ADDR	0xfffff61c
-#define WCN		WORD_REF(WCN_ADDR)
-
-/*
- * Watchdog Control and Status Register
- */
-#define WCSR_ADDR	0xfffff618
-#define WCSR		WORD_REF(WCSR_ADDR)
-
-#define WCSR_WDEN	0x0001	/* Watchdog Enable */
-#define WCSR_FI		0x0002	/* Forced Interrupt (instead of SW reset)*/
-#define WCSR_WRST	0x0004	/* Watchdog Reset */
-
-/**********
- *
- * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
- *
- **********/
-
-/*
- * SPI Slave Register
- */
-#define SPISR_ADDR	0xfffff700
-#define SPISR		WORD_REF(SPISR_ADDR)
-
-#define SPISR_DATA_ADDR	0xfffff701
-#define SPISR_DATA	BYTE_REF(SPISR_DATA_ADDR)
-
-#define SPISR_DATA_MASK	 0x00ff	/* Shifted data from the external device */
-#define SPISR_DATA_SHIFT 0
-#define SPISR_SPISEN	 0x0100	/* SPIS module enable */
-#define SPISR_POL	 0x0200	/* SPSCLK polarity control */
-#define SPISR_PHA	 0x0400	/* Phase relationship between SPSCLK & SPSRxD */
-#define SPISR_OVWR	 0x0800	/* Data buffer has been overwritten */
-#define SPISR_DATARDY	 0x1000	/* Data ready */
-#define SPISR_ENPOL	 0x2000	/* Enable Polarity */
-#define SPISR_IRQEN	 0x4000	/* SPIS IRQ Enable */
-#define SPISR_SPISIRQ	 0x8000	/* SPIS IRQ posted */
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_SPIMIRQ	 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_RSPIMEN	 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* 'EZ328-compatible definitions */
-#define SPIMCONT_IRQ	SPIMCONT_SPIMIRQ
-#define SPIMCONT_ENABLE	SPIMCONT_SPIMEN
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAVAILEN	0x0001	/* Transmitter Available Int Enable */
-#define USTCNT_TXHALFEN		0x0002	/* Transmitter Half Empty Int Enable */
-#define USTCNT_TXEMPTYEN	0x0004	/* Transmitter Empty Int Enable */
-#define USTCNT_RXREADYEN	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHALFEN		0x0010	/* Receiver Half-Full Int Enable */
-#define USTCNT_RXFULLEN		0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSDELTAEN	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_GPIODELTAEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7		0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP		0x0200	/* Stop bit transmission */
-#define USTCNT_ODD_EVEN		0x0400	/* Odd Parity */
-#define	USTCNT_PARITYEN		0x0800	/* Parity Enable */
-#define USTCNT_CLKMODE		0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN		0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN		0x4000	/* Receiver Enable */
-#define USTCNT_UARTEN		0x8000	/* UART Enable */
-
-/* 'EZ328-compatible definitions */
-#define USTCNT_TXAE	USTCNT_TXAVAILEN 
-#define USTCNT_TXHE	USTCNT_TXHALFEN
-#define USTCNT_TXEE	USTCNT_TXEMPTYEN
-#define USTCNT_RXRE	USTCNT_RXREADYEN
-#define USTCNT_RXHE	USTCNT_RXHALFEN
-#define USTCNT_RXFE	USTCNT_RXFULLEN
-#define USTCNT_CTSD	USTCNT_CTSDELTAEN
-#define USTCNT_ODD	USTCNT_ODD_EVEN
-#define USTCNT_PEN	USTCNT_PARITYEN
-#define USTCNT_CLKM	USTCNT_CLKMODE
-#define USTCNT_UEN	USTCNT_UARTEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_GPIOSRC		0x1000	/* GPIO source */
-#define UBAUD_GPIODIR		0x2000	/* GPIO Direction */
-#define UBAUD_GPIO		0x4000	/* Current GPIO pin status */
-#define UBAUD_GPIODELTA		0x8000	/* GPIO pin value changed */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STATUS	 0x0200	/* CTS State */
-#define	UTX_IGNORE_CTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* 'EZ328-compatible definitions */
-#define UTX_CTS_STAT	UTX_CTS_STATUS
-#define UTX_NOCTS	UTX_IGNORE_CTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int pad1;
-  volatile unsigned short int pad2;
-  volatile unsigned short int pad3;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0xfffffffe	/* Bit 0 is reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with 'EZ328 !!!)
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02ff		/* Bits 0-3 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x02ff		/* Bits 10-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x01	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define LPICF_PBSIZ_MASK 0x06	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x02
-#define   LPICF_PBSIZ_4    0x04
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_PCDS	 0x01	/* Pixel Clock Divider Source Select */
-#define LCKCON_DWIDTH	 0x02	/* Display Memory Width  */
-#define LCKCON_DWS_MASK	 0x3c	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 2
-#define LCKCON_DMA16	 0x40	/* DMA burst length */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* 'EZ328-compatible definitions */
-#define LCKCON_DW_MASK	LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT	LCKCON_DWS_SHIFT
-
-/*
- * LCD Last Buffer Address Register
- */
-#define LLBAR_ADDR	0xfffffa29
-#define LLBAR		BYTE_REF(LLBAR_ADDR)
-
-#define LLBAR_LBAR_MASK	 0x7f	/* Number of memory words to fill 1 line */
-#define LLBAR_LBAR_SHIFT 0
-
-/*
- * LCD Octet Terminal Count Register 
- */
-#define LOTCR_ADDR	0xfffffa2b
-#define LOTCR		BYTE_REF(LOTCR_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_BOS	0x08	/* Byte offset (for B/W mode only */
-#define LPOSR_POS_MASK	0x07	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa32
-#define LGPMR		WORD_REF(LGPMR_ADDR)
-
-#define LGPMR_GLEVEL3_MASK	0x000f
-#define LGPMR_GLEVEL3_SHIFT	0 
-#define LGPMR_GLEVEL2_MASK	0x00f0
-#define LGPMR_GLEVEL2_SHIFT	4 
-#define LGPMR_GLEVEL0_MASK	0x0f00
-#define LGPMR_GLEVEL0_SHIFT	8 
-#define LGPMR_GLEVEL1_MASK	0xf000
-#define LGPMR_GLEVEL1_SHIFT	12
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_384	0x0020	/* Crystal Selection */
-#define RTCCTL_ENABLE	0x0080	/* RTC Enable */
-
-/* 'EZ328-compatible definitions */
-#define RTCCTL_XTL	RTCCTL_384
-#define RTCCTL_EN	RTCCTL_ENABLE
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK	 0x00ff	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-#endif /* _MC68328_H_ */
diff --git a/include/asm-m68knommu/MC68332.h b/include/asm-m68knommu/MC68332.h
deleted file mode 100644
index 6bb8f02685a2..000000000000
--- a/include/asm-m68knommu/MC68332.h
+++ /dev/null
@@ -1,152 +0,0 @@
-
-/* include/asm-m68knommu/MC68332.h: '332 control registers
- *
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *
- */
-
-#ifndef _MC68332_H_
-#define _MC68332_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-
-#define PORTE_ADDR	0xfffa11
-#define PORTE	BYTE_REF(PORTE_ADDR)
-#define DDRE_ADDR	0xfffa15
-#define DDRE	BYTE_REF(DDRE_ADDR)
-#define PEPAR_ADDR	0xfffa17
-#define PEPAR	BYTE_REF(PEPAR_ADDR)
-
-#define PORTF_ADDR	0xfffa19
-#define PORTF	BYTE_REF(PORTF_ADDR)
-#define DDRF_ADDR	0xfffa1d
-#define DDRF	BYTE_REF(DDRF_ADDR)
-#define PFPAR_ADDR	0xfffa1f
-#define PFPAR	BYTE_REF(PFPAR_ADDR)
-
-#define PORTQS_ADDR	0xfffc15
-#define PORTQS	BYTE_REF(PORTQS_ADDR)
-#define DDRQS_ADDR	0xfffc17
-#define DDRQS	BYTE_REF(DDRQS_ADDR)
-#define PQSPAR_ADDR	0xfffc16
-#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
-
-#define CSPAR0_ADDR 0xFFFA44
-#define CSPAR0 WORD_REF(CSPAR0_ADDR)
-#define CSPAR1_ADDR 0xFFFA46
-#define CSPAR1 WORD_REF(CSPAR1_ADDR)
-#define CSARBT_ADDR 0xFFFA48
-#define CSARBT WORD_REF(CSARBT_ADDR)
-#define CSOPBT_ADDR 0xFFFA4A
-#define CSOPBT WORD_REF(CSOPBT_ADDR)
-#define CSBAR0_ADDR 0xFFFA4C
-#define CSBAR0 WORD_REF(CSBAR0_ADDR)
-#define CSOR0_ADDR 0xFFFA4E
-#define CSOR0 WORD_REF(CSOR0_ADDR)
-#define CSBAR1_ADDR 0xFFFA50
-#define CSBAR1 WORD_REF(CSBAR1_ADDR)
-#define CSOR1_ADDR 0xFFFA52
-#define CSOR1 WORD_REF(CSOR1_ADDR)
-#define CSBAR2_ADDR 0xFFFA54
-#define CSBAR2 WORD_REF(CSBAR2_ADDR)
-#define CSOR2_ADDR 0xFFFA56
-#define CSOR2 WORD_REF(CSOR2_ADDR)
-#define CSBAR3_ADDR 0xFFFA58
-#define CSBAR3 WORD_REF(CSBAR3_ADDR)
-#define CSOR3_ADDR 0xFFFA5A
-#define CSOR3 WORD_REF(CSOR3_ADDR)
-#define CSBAR4_ADDR 0xFFFA5C
-#define CSBAR4 WORD_REF(CSBAR4_ADDR)
-#define CSOR4_ADDR 0xFFFA5E
-#define CSOR4 WORD_REF(CSOR4_ADDR)
-#define CSBAR5_ADDR 0xFFFA60
-#define CSBAR5 WORD_REF(CSBAR5_ADDR)
-#define CSOR5_ADDR 0xFFFA62
-#define CSOR5 WORD_REF(CSOR5_ADDR)
-#define CSBAR6_ADDR 0xFFFA64
-#define CSBAR6 WORD_REF(CSBAR6_ADDR)
-#define CSOR6_ADDR 0xFFFA66
-#define CSOR6 WORD_REF(CSOR6_ADDR)
-#define CSBAR7_ADDR 0xFFFA68
-#define CSBAR7 WORD_REF(CSBAR7_ADDR)
-#define CSOR7_ADDR 0xFFFA6A
-#define CSOR7 WORD_REF(CSOR7_ADDR)
-#define CSBAR8_ADDR 0xFFFA6C
-#define CSBAR8 WORD_REF(CSBAR8_ADDR)
-#define CSOR8_ADDR 0xFFFA6E
-#define CSOR8 WORD_REF(CSOR8_ADDR)
-#define CSBAR9_ADDR 0xFFFA70
-#define CSBAR9 WORD_REF(CSBAR9_ADDR)
-#define CSOR9_ADDR 0xFFFA72
-#define CSOR9 WORD_REF(CSOR9_ADDR)
-#define CSBAR10_ADDR 0xFFFA74
-#define CSBAR10 WORD_REF(CSBAR10_ADDR)
-#define CSOR10_ADDR 0xFFFA76
-#define CSOR10 WORD_REF(CSOR10_ADDR)
-
-#define CSOR_MODE_ASYNC	0x0000
-#define CSOR_MODE_SYNC	0x8000
-#define CSOR_MODE_MASK	0x8000
-#define CSOR_BYTE_DISABLE	0x0000
-#define CSOR_BYTE_UPPER		0x4000
-#define CSOR_BYTE_LOWER		0x2000
-#define CSOR_BYTE_BOTH		0x6000
-#define CSOR_BYTE_MASK		0x6000
-#define CSOR_RW_RSVD		0x0000
-#define CSOR_RW_READ		0x0800
-#define CSOR_RW_WRITE		0x1000
-#define CSOR_RW_BOTH		0x1800
-#define CSOR_RW_MASK		0x1800
-#define CSOR_STROBE_DS		0x0400
-#define CSOR_STROBE_AS		0x0000
-#define CSOR_STROBE_MASK	0x0400
-#define CSOR_DSACK_WAIT(x)	(wait << 6)
-#define CSOR_DSACK_FTERM	(14 << 6)
-#define CSOR_DSACK_EXTERNAL	(15 << 6)
-#define CSOR_DSACK_MASK		0x03c0
-#define CSOR_SPACE_CPU		0x0000
-#define CSOR_SPACE_USER		0x0010
-#define CSOR_SPACE_SU		0x0020
-#define CSOR_SPACE_BOTH		0x0030
-#define CSOR_SPACE_MASK		0x0030
-#define CSOR_IPL_ALL		0x0000
-#define CSOR_IPL_PRIORITY(x)	(x << 1)
-#define CSOR_IPL_MASK		0x000e
-#define CSOR_AVEC_ON		0x0001
-#define CSOR_AVEC_OFF		0x0000
-#define CSOR_AVEC_MASK		0x0001
-
-#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
-#define CSBAR_ADDR_MASK		0xfff8
-#define CSBAR_BLKSIZE_2K	0x0000
-#define CSBAR_BLKSIZE_8K	0x0001
-#define CSBAR_BLKSIZE_16K	0x0002
-#define CSBAR_BLKSIZE_64K	0x0003
-#define CSBAR_BLKSIZE_128K	0x0004
-#define CSBAR_BLKSIZE_256K	0x0005
-#define CSBAR_BLKSIZE_512K	0x0006
-#define CSBAR_BLKSIZE_1M	0x0007
-#define CSBAR_BLKSIZE_MASK	0x0007
-
-#define CSPAR_DISC	0
-#define CSPAR_ALT	1
-#define CSPAR_CS8	2
-#define CSPAR_CS16	3
-#define CSPAR_MASK	3
-
-#define CSPAR0_CSBOOT(x) (x << 0)
-#define CSPAR0_CS0(x)	(x << 2)
-#define CSPAR0_CS1(x)	(x << 4)
-#define CSPAR0_CS2(x)	(x << 6)
-#define CSPAR0_CS3(x)	(x << 8)
-#define CSPAR0_CS4(x)	(x << 10)
-#define CSPAR0_CS5(x)	(x << 12)
-
-#define CSPAR1_CS6(x)	(x << 0)
-#define CSPAR1_CS7(x)	(x << 2)
-#define CSPAR1_CS8(x)	(x << 4)
-#define CSPAR1_CS9(x)	(x << 6)
-#define CSPAR1_CS10(x)	(x << 8)
-
-#endif
diff --git a/include/asm-m68knommu/MC68EZ328.h b/include/asm-m68knommu/MC68EZ328.h
deleted file mode 100644
index 69b7f9139e5e..000000000000
--- a/include/asm-m68knommu/MC68EZ328.h
+++ /dev/null
@@ -1,1253 +0,0 @@
-
-/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
- *
- * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
- *                     Bear & Hare Software, Inc.
- *
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- *
- */
-
-#ifndef _MC68EZ328_H_
-#define _MC68EZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR	 LONG_REF(MRR_ADDR)
-
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
- 
-/*
- * Chip Select Group Base Registers 
- */
-#define CSGBA_ADDR	0xfffff100
-#define CSGBB_ADDR	0xfffff102
-
-#define CSGBC_ADDR	0xfffff104
-#define CSGBD_ADDR	0xfffff106
-
-#define CSGBA		WORD_REF(CSGBA_ADDR)
-#define CSGBB		WORD_REF(CSGBB_ADDR)
-#define CSGBC		WORD_REF(CSGBC_ADDR)
-#define CSGBD		WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers 
- */
-#define CSA_ADDR	0xfffff110
-#define CSB_ADDR	0xfffff112
-#define CSC_ADDR	0xfffff114
-#define CSD_ADDR	0xfffff116
-
-#define CSA		WORD_REF(CSA_ADDR)
-#define CSB		WORD_REF(CSB_ADDR)
-#define CSC		WORD_REF(CSC_ADDR)
-#define CSD		WORD_REF(CSD_ADDR)
-
-#define CSA_EN		0x0001		/* Chip-Select Enable */
-#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSA_SIZ_SHIFT   1
-#define CSA_WS_MASK	0x0070		/* Wait State */
-#define CSA_WS_SHIFT    4
-#define CSA_BSW		0x0080		/* Data Bus Width */
-#define CSA_FLASH	0x0100		/* FLASH Memory Support */
-#define CSA_RO		0x8000		/* Read-Only */
-
-#define CSB_EN		0x0001		/* Chip-Select Enable */
-#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSB_SIZ_SHIFT   1
-#define CSB_WS_MASK	0x0070		/* Wait State */
-#define CSB_WS_SHIFT    4
-#define CSB_BSW		0x0080		/* Data Bus Width */
-#define CSB_FLASH	0x0100		/* FLASH Memory Support */
-#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP		0x2000		/* Readonly if protected */
-#define CSB_SOP		0x4000		/* Supervisor only if protected */
-#define CSB_RO		0x8000		/* Read-Only */
-
-#define CSC_EN		0x0001		/* Chip-Select Enable */
-#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSC_SIZ_SHIFT   1
-#define CSC_WS_MASK	0x0070		/* Wait State */
-#define CSC_WS_SHIFT    4
-#define CSC_BSW		0x0080		/* Data Bus Width */
-#define CSC_FLASH	0x0100		/* FLASH Memory Support */
-#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP		0x2000		/* Readonly if protected */
-#define CSC_SOP		0x4000		/* Supervisor only if protected */
-#define CSC_RO		0x8000		/* Read-Only */
-
-#define CSD_EN		0x0001		/* Chip-Select Enable */
-#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSD_SIZ_SHIFT   1
-#define CSD_WS_MASK	0x0070		/* Wait State */
-#define CSD_WS_SHIFT    4
-#define CSD_BSW		0x0080		/* Data Bus Width */
-#define CSD_FLASH	0x0100		/* FLASH Memory Support */
-#define CSD_DRAM	0x0200		/* Dram Selection */
-#define	CSD_COMB	0x0400		/* Combining */
-#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP		0x2000		/* Readonly if protected */
-#define CSD_SOP		0x4000		/* Supervisor only if protected */
-#define CSD_RO		0x8000		/* Read-Only */
-
-/*
- * Emulation Chip-Select Register 
- */
-#define EMUCS_ADDR	0xfffff118
-#define EMUCS		WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK	0x0070
-#define EMUCS_WS_SHIFT	4
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for 
- * request_irq
- */
-#define SPI_IRQ_NUM	0	/* SPI interrupt */
-#define TMR_IRQ_NUM	1	/* Timer interrupt */
-#define UART_IRQ_NUM	2	/* UART interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define IRQ5_IRQ_NUM	20	/* IRQ5 */
-#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM	SPI_IRQ_NUM
-#define TMR1_IRQ_NUM	TMR_IRQ_NUM
-
-/* 
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
-#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
-#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM	IMR_MSPI
-#define IMR_MTMR1	IMR_MTMR
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM	ISR_SPI
-#define ISR_TMR1	ISR_TMR
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff30c
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM	IPR_SPI
-#define IPR_TMR1	IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x)		(1 << (x))
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)		(1 << (x))
-
-#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
-#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
-#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
-#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
-#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
-#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
-#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)		(1 << (x))
-
-#define PC_LD0		0x01	/* Use LD0  as PC[0] */
-#define PC_LD1		0x02	/* Use LD1  as PC[1] */
-#define PC_LD2		0x04	/* Use LD2  as PC[2] */
-#define PC_LD3		0x08	/* Use LD3  as PC[3] */
-#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
-#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
-#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
-#define PC_LACD		0x80	/* Use LACD as PC[7] */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define PDSEL		BYTE_REF(PDSEL_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)		(1 << (x))
-
-#define PD_INT0		0x01	/* Use INT0 as PD[0] */
-#define PD_INT1		0x02	/* Use INT1 as PD[1] */
-#define PD_INT2		0x04	/* Use INT2 as PD[2] */
-#define PD_INT3		0x08	/* Use INT3 as PD[3] */
-#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
-#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
-#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
-#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)		(1 << (x))
-
-#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
-#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
-#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
-#define PE_DWE		0x08	/* Use DWE    as PE[3] */
-#define PE_RXD		0x10	/* Use RXD    as PE[4] */
-#define PE_TXD		0x20	/* Use TXD    as PE[5] */
-#define PE_RTS		0x40	/* Use RTS    as PE[6] */
-#define PE_CTS		0x80	/* Use CTS    as PE[7] */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)		(1 << (x))
-
-#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
-#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
-#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
-#define PF_A20          0x08    /* Use A20       as PF[3] */
-#define PF_A21          0x10    /* Use A21       as PF[4] */
-#define PF_A22          0x20    /* Use A22       as PF[5] */
-#define PF_A23          0x40    /* Use A23       as PF[6] */
-#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)		(1 << (x))
-
-#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
-#define PG_A0		0x02	/* Use A0         as PG[1] */
-#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
-#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
-#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
-#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register 
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
-#define PWMC_REPEAT_SHIFT	2
-#define PWMC_EN			0x0010	/* Enable PWM */
-#define PMNC_FIFOAV		0x0020	/* FIFO Available */
-#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
-#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT	8
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN	PWMC_EN
-
-/*
- * PWM Sample Register 
- */
-#define PWMS_ADDR	0xfffff502
-#define PWMS		WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff504
-#define PWMP		BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff505
-#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/* 
- * Timer Control register
- */
-#define TCTL_ADDR	0xfffff600
-#define TCTL		WORD_REF(TCTL_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR	TCTL_ADDR
-#define TCTL1		TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR	0xfffff602
-#define TPRER		WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR	TPRER_ADDR
-#define TPRER1		TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR	0xfffff604
-#define TCMP		WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR	TCMP_ADDR
-#define TCMP1		TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR	0xfffff606
-#define TCR		WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR	TCR_ADDR
-#define TCR1		TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR	0xfffff608
-#define TCN		WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR	TCN_ADDR
-#define TCN1		TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR	0xfffff60a
-#define TSTAT		WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR	TSTAT_ADDR
-#define TSTAT1		TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
-#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP	0x0200	/* Stop bit transmission */
-#define USTCNT_ODD	0x0400	/* Odd Parity */
-#define	USTCNT_PEN	0x0800	/* Parity Enable */
-#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN	0x4000	/* Receiver Enable */
-#define USTCNT_UEN	0x8000	/* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN	USTCNT_TXAE
-#define USTCNT_TXHALFEN		USTCNT_TXHE
-#define USTCNT_TXEMPTYEN	USTCNT_TXEE
-#define USTCNT_RXREADYEN	USTCNT_RXRE
-#define USTCNT_RXHALFEN		USTCNT_RXHE
-#define USTCNT_RXFULLEN		USTCNT_RXFE
-#define USTCNT_CTSDELTAEN	USTCNT_CTSD
-#define USTCNT_ODD_EVEN		USTCNT_ODD
-#define USTCNT_PARITYEN		USTCNT_PEN
-#define USTCNT_CLKMODE		USTCNT_CLKM
-#define USTCNT_UARTEN		USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STAT	 0x0200	/* CTS State */
-#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
-#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS	UTX_CTS_STAT
-#define UTX_IGNORE_CTS	UTX_NOCTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
-
-/* 
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR	0xfffff90a
-#define NIPR		WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT	0
-#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
-#define NIPR_SELECT_SHIFT	8
-#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef volatile struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int nipr;
-  volatile unsigned short int pad1;
-  volatile unsigned short int pad2;
-} __attribute__((packed)) m68328_uart;
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!) 
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define   LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x04
-#define   LPICF_PBSIZ_4    0x08
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK  LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
- 
-/*
- * LCD Refresh Rate Adjustment Register 
- */
-#define LRRA_ADDR	0xfffffa29
-#define LRRA		BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa33
-#define LGPMR		BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK	0x0f
-#define LGPMR_G1_SHIFT	0
-#define LGPMR_G2_MASK	0xf0
-#define LGPMR_G2_SHIFT	4
-
-/* 
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR	0xfffffa36
-#define PWMR		WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
-#define PWMR_PW_SHIFT	0
-#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
-#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
-#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
-#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
-#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * Watchdog Timer Register 
- */
-#define WATCHDOG_ADDR	0xfffffb0a
-#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
-#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
-#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL	0x0020	/* Crystal Selection */
-#define RTCCTL_EN	0x0080	/* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384	RTCCTL_XTL
-#define RTCCTL_ENABLE	RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
-#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
-#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
-#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
-#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
-#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
-#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
-#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
-#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
-#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
-#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
-#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
-#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
-#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH)
-
-#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register 
- */
-#define DAYR_ADDR	0xfffffb1a
-#define DAYR		WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register 
- */
-#define DAYALARM_ADDR	0xfffffb1c
-#define DAYALARM	WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 	0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register 
- */
-#define DRAMMC_ADDR	0xfffffc00
-#define DRAMMC		WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
-#define   DRAMMC_ROW12_PA10	0x0000
-#define   DRAMMC_ROW12_PA21	0x4000	
-#define   DRAMMC_ROW12_PA23	0x8000
-#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
-#define	  DRAMMC_ROW0_PA11	0x0000
-#define   DRAMMC_ROW0_PA22	0x1000
-#define   DRAMMC_ROW0_PA23	0x2000
-#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
-#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
-#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
-#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
-#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
-#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
-#define DRAMMC_REF_SHIFT	0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR	0xfffffc02
-#define DRAMC		WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
-#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
-#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
-#define DRAMC_SLW	   0x0008	/* Slow RAM */
-#define DRAMC_LSP	   0x0010	/* Light Sleep */
-#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
-#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
-#define DRAMC_WS_SHIFT	   6
-#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT   8
-#define   DRAMC_PGSZ_256K  0x0000	
-#define   DRAMC_PGSZ_512K  0x0100
-#define   DRAMC_PGSZ_1024K 0x0200
-#define	  DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO	   0x0400	/* EDO DRAM */
-#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT	   12
-#define DRAMC_RM	   0x4000	/* Refresh Mode */
-#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR	0xfffffd00
-#define ICEMACR		LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR	0xfffffd04
-#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR	0xfffffd08
-#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
-#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR	0xfffffd0a
-#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
-#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register 
- */
-#define ICEMCR_ADDR	0xfffffd0c
-#define ICEMCR		WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN	0x0001	/* Compare Enable */
-#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
-#define ICEMCR_SB	0x0004	/* Single Breakpoint */
-#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
-#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register 
- */
-#define ICEMSR_ADDR	0xfffffd0e
-#define ICEMSR		WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
-#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68EZ328_H_ */
diff --git a/include/asm-m68knommu/MC68VZ328.h b/include/asm-m68knommu/MC68VZ328.h
deleted file mode 100644
index 2b9bf626a0a5..000000000000
--- a/include/asm-m68knommu/MC68VZ328.h
+++ /dev/null
@@ -1,1349 +0,0 @@
-
-/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
- *
- * Copyright (c) 2000-2001	Lineo Inc. <www.lineo.com>
- * Copyright (c) 2000-2001	Lineo Canada Corp. <www.lineo.ca>
- * Copyright (C) 1999		Vladimir Gurevich <vgurevic@cisco.com>
- * 				Bare & Hare Software, Inc.
- * Based on include/asm-m68knommu/MC68332.h
- * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
- *                     The Silver Hammer Group, Ltd.
- *
- * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
- * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
- */
-
-#ifndef _MC68VZ328_H_
-#define _MC68VZ328_H_
-
-#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
-#define WORD_REF(addr) (*((volatile unsigned short*)addr))
-#define LONG_REF(addr) (*((volatile unsigned long*)addr))
-
-#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
-#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
-
-/********** 
- *
- * 0xFFFFF0xx -- System Control
- *
- **********/
- 
-/*
- * System Control Register (SCR)
- */
-#define SCR_ADDR	0xfffff000
-#define SCR		BYTE_REF(SCR_ADDR)
-
-#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
-#define SCR_DMAP	0x04	/* Double Map */
-#define SCR_SO		0x08	/* Supervisor Only */
-#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
-#define SCR_PRV		0x20	/* Privilege Violation */
-#define SCR_WPV		0x40	/* Write Protect Violation */
-#define SCR_BETO	0x80	/* Bus-Error TimeOut */
-
-/*
- * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
- */
-#define MRR_ADDR 0xfffff004
-#define MRR	 LONG_REF(MRR_ADDR)
-
-/********** 
- *
- * 0xFFFFF1xx -- Chip-Select logic
- *
- **********/
- 
-/*
- * Chip Select Group Base Registers 
- */
-#define CSGBA_ADDR	0xfffff100
-#define CSGBB_ADDR	0xfffff102
-
-#define CSGBC_ADDR	0xfffff104
-#define CSGBD_ADDR	0xfffff106
-
-#define CSGBA		WORD_REF(CSGBA_ADDR)
-#define CSGBB		WORD_REF(CSGBB_ADDR)
-#define CSGBC		WORD_REF(CSGBC_ADDR)
-#define CSGBD		WORD_REF(CSGBD_ADDR)
-
-/*
- * Chip Select Registers 
- */
-#define CSA_ADDR	0xfffff110
-#define CSB_ADDR	0xfffff112
-#define CSC_ADDR	0xfffff114
-#define CSD_ADDR	0xfffff116
-
-#define CSA		WORD_REF(CSA_ADDR)
-#define CSB		WORD_REF(CSB_ADDR)
-#define CSC		WORD_REF(CSC_ADDR)
-#define CSD		WORD_REF(CSD_ADDR)
-
-#define CSA_EN		0x0001		/* Chip-Select Enable */
-#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSA_SIZ_SHIFT   1
-#define CSA_WS_MASK	0x0070		/* Wait State */
-#define CSA_WS_SHIFT    4
-#define CSA_BSW		0x0080		/* Data Bus Width */
-#define CSA_FLASH	0x0100		/* FLASH Memory Support */
-#define CSA_RO		0x8000		/* Read-Only */
-
-#define CSB_EN		0x0001		/* Chip-Select Enable */
-#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSB_SIZ_SHIFT   1
-#define CSB_WS_MASK	0x0070		/* Wait State */
-#define CSB_WS_SHIFT    4
-#define CSB_BSW		0x0080		/* Data Bus Width */
-#define CSB_FLASH	0x0100		/* FLASH Memory Support */
-#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSB_UPSIZ_SHIFT 11
-#define CSB_ROP		0x2000		/* Readonly if protected */
-#define CSB_SOP		0x4000		/* Supervisor only if protected */
-#define CSB_RO		0x8000		/* Read-Only */
-
-#define CSC_EN		0x0001		/* Chip-Select Enable */
-#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSC_SIZ_SHIFT   1
-#define CSC_WS_MASK	0x0070		/* Wait State */
-#define CSC_WS_SHIFT    4
-#define CSC_BSW		0x0080		/* Data Bus Width */
-#define CSC_FLASH	0x0100		/* FLASH Memory Support */
-#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSC_UPSIZ_SHIFT 11
-#define CSC_ROP		0x2000		/* Readonly if protected */
-#define CSC_SOP		0x4000		/* Supervisor only if protected */
-#define CSC_RO		0x8000		/* Read-Only */
-
-#define CSD_EN		0x0001		/* Chip-Select Enable */
-#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
-#define CSD_SIZ_SHIFT   1
-#define CSD_WS_MASK	0x0070		/* Wait State */
-#define CSD_WS_SHIFT    4
-#define CSD_BSW		0x0080		/* Data Bus Width */
-#define CSD_FLASH	0x0100		/* FLASH Memory Support */
-#define CSD_DRAM	0x0200		/* Dram Selection */
-#define	CSD_COMB	0x0400		/* Combining */
-#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
-#define CSD_UPSIZ_SHIFT 11
-#define CSD_ROP		0x2000		/* Readonly if protected */
-#define CSD_SOP		0x4000		/* Supervisor only if protected */
-#define CSD_RO		0x8000		/* Read-Only */
-
-/*
- * Emulation Chip-Select Register 
- */
-#define EMUCS_ADDR	0xfffff118
-#define EMUCS		WORD_REF(EMUCS_ADDR)
-
-#define EMUCS_WS_MASK	0x0070
-#define EMUCS_WS_SHIFT	4
-
-/********** 
- *
- * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
- *
- **********/
-
-/*
- * PLL Control Register 
- */
-#define PLLCR_ADDR	0xfffff200
-#define PLLCR		WORD_REF(PLLCR_ADDR)
-
-#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
-#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
-#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
-#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
-#define PLLCR_SYSCLK_SEL_SHIFT 8
-#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
-#define PLLCR_LCDCLK_SEL_SHIFT 11
-
-/* '328-compatible definitions */
-#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
-#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
-
-/*
- * PLL Frequency Select Register
- */
-#define PLLFSR_ADDR	0xfffff202
-#define PLLFSR		WORD_REF(PLLFSR_ADDR)
-
-#define PLLFSR_PC_MASK	0x00ff		/* P Count */
-#define PLLFSR_PC_SHIFT 0
-#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
-#define PLLFSR_QC_SHIFT 8
-#define PLLFSR_PROT	0x4000		/* Protect P & Q */
-#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
-
-/*
- * Power Control Register
- */
-#define PCTRL_ADDR	0xfffff207
-#define PCTRL		BYTE_REF(PCTRL_ADDR)
-
-#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
-#define PCTRL_WIDTH_SHIFT	0
-#define PCTRL_PCEN		0x80	/* Power Control Enable */
-
-/**********
- *
- * 0xFFFFF3xx -- Interrupt Controller
- *
- **********/
-
-/* 
- * Interrupt Vector Register
- */
-#define IVR_ADDR	0xfffff300
-#define IVR		BYTE_REF(IVR_ADDR)
-
-#define IVR_VECTOR_MASK 0xF8
-
-/*
- * Interrupt control Register
- */
-#define ICR_ADDR	0xfffff302
-#define ICR		WORD_REF(ICR_ADDR)
-
-#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
-#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
-#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
-#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
-#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
-#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
-#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
-#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
-#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
-
-/*
- * Interrupt Mask Register
- */
-#define IMR_ADDR	0xfffff304
-#define IMR		LONG_REF(IMR_ADDR)
-
-/*
- * Define the names for bit positions first. This is useful for 
- * request_irq
- */
-#define SPI2_IRQ_NUM	0	/* SPI 2 interrupt */
-#define TMR_IRQ_NUM	1	/* Timer 1 interrupt */
-#define UART1_IRQ_NUM	2	/* UART 1 interrupt */	
-#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
-#define RTC_IRQ_NUM	4	/* RTC interrupt */
-#define TMR2_IRQ_NUM	5	/* Timer 2 interrupt */
-#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
-#define PWM1_IRQ_NUM	7	/* Pulse-Width Modulator 1 int. */
-#define	INT0_IRQ_NUM	8	/* External INT0 */
-#define	INT1_IRQ_NUM	9	/* External INT1 */
-#define	INT2_IRQ_NUM	10	/* External INT2 */
-#define	INT3_IRQ_NUM	11	/* External INT3 */
-#define UART2_IRQ_NUM	12	/* UART 2 interrupt */	
-#define PWM2_IRQ_NUM	13	/* Pulse-Width Modulator 1 int. */
-#define IRQ1_IRQ_NUM	16	/* IRQ1 */
-#define IRQ2_IRQ_NUM	17	/* IRQ2 */
-#define IRQ3_IRQ_NUM	18	/* IRQ3 */
-#define IRQ6_IRQ_NUM	19	/* IRQ6 */
-#define IRQ5_IRQ_NUM	20	/* IRQ5 */
-#define SPI1_IRQ_NUM	21	/* SPI 1 interrupt */
-#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
-#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
-
-#define SPI_IRQ_NUM	SPI2_IRQ_NUM
-
-/* '328-compatible definitions */
-#define SPIM_IRQ_NUM	SPI_IRQ_NUM
-#define TMR1_IRQ_NUM	TMR_IRQ_NUM
-#define UART_IRQ_NUM	UART1_IRQ_NUM
-
-/* 
- * Here go the bitmasks themselves
- */
-#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
-#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
-#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
-#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
-#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
-#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
-#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
-#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
-#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
-#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
-#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
-#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
-#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
-#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
-#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
-#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
-#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
-#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IMR_MSPIM	IMR_MSPI
-#define IMR_MTMR1	IMR_MTMR
-
-/* 
- * Interrupt Status Register 
- */
-#define ISR_ADDR	0xfffff30c
-#define ISR		LONG_REF(ISR_ADDR)
-
-#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define ISR_SPIM	ISR_SPI
-#define ISR_TMR1	ISR_TMR
-
-/* 
- * Interrupt Pending Register 
- */
-#define IPR_ADDR	0xfffff30c
-#define IPR		LONG_REF(IPR_ADDR)
-
-#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
-#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
-#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
-#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
-#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
-#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
-#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
-#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
-#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
-#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
-#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
-#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
-#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
-#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
-#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
-#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
-#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
-#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
-
-/* '328-compatible definitions */
-#define IPR_SPIM	IPR_SPI
-#define IPR_TMR1	IPR_TMR
-
-/**********
- *
- * 0xFFFFF4xx -- Parallel Ports
- *
- **********/
-
-/*
- * Port A
- */
-#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
-#define PADATA_ADDR	0xfffff401		/* Port A data register */
-#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
-
-#define PADIR		BYTE_REF(PADIR_ADDR)
-#define PADATA		BYTE_REF(PADATA_ADDR)
-#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
-
-#define PA(x)		(1 << (x))
-
-/* 
- * Port B
- */
-#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
-#define PBDATA_ADDR	0xfffff409		/* Port B data register */
-#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
-#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
-
-#define PBDIR		BYTE_REF(PBDIR_ADDR)
-#define PBDATA		BYTE_REF(PBDATA_ADDR)
-#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
-#define PBSEL		BYTE_REF(PBSEL_ADDR)
-
-#define PB(x)		(1 << (x))
-
-#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
-#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
-#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
-#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
-#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
-#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
-#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
-#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
-
-/* 
- * Port C
- */
-#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
-#define PCDATA_ADDR	0xfffff411		/* Port C data register */
-#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
-#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
-
-#define PCDIR		BYTE_REF(PCDIR_ADDR)
-#define PCDATA		BYTE_REF(PCDATA_ADDR)
-#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
-#define PCSEL		BYTE_REF(PCSEL_ADDR)
-
-#define PC(x)		(1 << (x))
-
-#define PC_LD0		0x01	/* Use LD0  as PC[0] */
-#define PC_LD1		0x02	/* Use LD1  as PC[1] */
-#define PC_LD2		0x04	/* Use LD2  as PC[2] */
-#define PC_LD3		0x08	/* Use LD3  as PC[3] */
-#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
-#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
-#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
-#define PC_LACD		0x80	/* Use LACD as PC[7] */
-
-/* 
- * Port D
- */
-#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
-#define PDDATA_ADDR	0xfffff419		/* Port D data register */
-#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
-#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
-#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
-#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
-#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
-#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
-
-#define PDDIR		BYTE_REF(PDDIR_ADDR)
-#define PDDATA		BYTE_REF(PDDATA_ADDR)
-#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
-#define PDSEL		BYTE_REF(PDSEL_ADDR)
-#define	PDPOL		BYTE_REF(PDPOL_ADDR)
-#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
-#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
-#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
-
-#define PD(x)		(1 << (x))
-
-#define PD_INT0		0x01	/* Use INT0 as PD[0] */
-#define PD_INT1		0x02	/* Use INT1 as PD[1] */
-#define PD_INT2		0x04	/* Use INT2 as PD[2] */
-#define PD_INT3		0x08	/* Use INT3 as PD[3] */
-#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
-#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
-#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
-#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
-
-/* 
- * Port E
- */
-#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
-#define PEDATA_ADDR	0xfffff421		/* Port E data register */
-#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
-#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
-
-#define PEDIR		BYTE_REF(PEDIR_ADDR)
-#define PEDATA		BYTE_REF(PEDATA_ADDR)
-#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
-#define PESEL		BYTE_REF(PESEL_ADDR)
-
-#define PE(x)		(1 << (x))
-
-#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
-#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
-#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
-#define PE_DWE		0x08	/* Use DWE    as PE[3] */
-#define PE_RXD		0x10	/* Use RXD    as PE[4] */
-#define PE_TXD		0x20	/* Use TXD    as PE[5] */
-#define PE_RTS		0x40	/* Use RTS    as PE[6] */
-#define PE_CTS		0x80	/* Use CTS    as PE[7] */
-
-/* 
- * Port F
- */
-#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
-#define PFDATA_ADDR	0xfffff429		/* Port F data register */
-#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
-#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
-
-#define PFDIR		BYTE_REF(PFDIR_ADDR)
-#define PFDATA		BYTE_REF(PFDATA_ADDR)
-#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
-#define PFSEL		BYTE_REF(PFSEL_ADDR)
-
-#define PF(x)		(1 << (x))
-
-#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
-#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
-#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
-#define PF_A20          0x08    /* Use A20       as PF[3] */
-#define PF_A21          0x10    /* Use A21       as PF[4] */
-#define PF_A22          0x20    /* Use A22       as PF[5] */
-#define PF_A23          0x40    /* Use A23       as PF[6] */
-#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
-
-/* 
- * Port G
- */
-#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
-#define PGDATA_ADDR	0xfffff431		/* Port G data register */
-#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
-#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
-
-#define PGDIR		BYTE_REF(PGDIR_ADDR)
-#define PGDATA		BYTE_REF(PGDATA_ADDR)
-#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
-#define PGSEL		BYTE_REF(PGSEL_ADDR)
-
-#define PG(x)		(1 << (x))
-
-#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
-#define PG_A0		0x02	/* Use A0         as PG[1] */
-#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
-#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
-#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
-#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
-
-/* 
- * Port J
- */
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enb. reg */
-#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)		(1 << (x))
-
-/*
- * Port K
- */
-#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
-#define PKDATA_ADDR	0xfffff441		/* Port K data register */
-#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enb. reg */
-#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
-
-#define PKDIR		BYTE_REF(PKDIR_ADDR)
-#define PKDATA		BYTE_REF(PKDATA_ADDR)
-#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
-#define PKSEL		BYTE_REF(PKSEL_ADDR)
-
-#define PK(x)		(1 << (x))
-
-#define PK_DATAREADY		0x01	/* Use ~DATA_READY  as PK[0] */
-#define PK_PWM2		0x01	/* Use PWM2  as PK[0] */
-#define PK_R_W		0x02	/* Use R/W  as PK[1] */
-#define PK_LDS		0x04	/* Use /LDS  as PK[2] */
-#define PK_UDS		0x08	/* Use /UDS  as PK[3] */
-#define PK_LD4		0x10	/* Use LD4 as PK[4] */
-#define PK_LD5 		0x20	/* Use LD5  as PK[5] */
-#define PK_LD6		0x40	/* Use LD6 as PK[6] */
-#define PK_LD7		0x80	/* Use LD7 as PK[7] */
-
-#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
-#define PJDATA_ADDR	0xfffff439		/* Port J data register */
-#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enable reg */
-#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
-
-#define PJDIR		BYTE_REF(PJDIR_ADDR)
-#define PJDATA		BYTE_REF(PJDATA_ADDR)
-#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
-#define PJSEL		BYTE_REF(PJSEL_ADDR)
-
-#define PJ(x)		(1 << (x))
-
-#define PJ_MOSI 	0x01	/* Use MOSI       as PJ[0] */
-#define PJ_MISO		0x02	/* Use MISO       as PJ[1] */
-#define PJ_SPICLK1  	0x04	/* Use SPICLK1    as PJ[2] */
-#define PJ_SS   	0x08	/* Use SS         as PJ[3] */
-#define PJ_RXD2         0x10	/* Use RXD2       as PJ[4] */
-#define PJ_TXD2  	0x20	/* Use TXD2       as PJ[5] */
-#define PJ_RTS2  	0x40	/* Use RTS2       as PJ[5] */
-#define PJ_CTS2  	0x80	/* Use CTS2       as PJ[5] */
-
-/*
- * Port M
- */
-#define PMDIR_ADDR	0xfffff448		/* Port M direction reg */
-#define PMDATA_ADDR	0xfffff449		/* Port M data register */
-#define PMPUEN_ADDR	0xfffff44a		/* Port M Pull-Up enable reg */
-#define PMSEL_ADDR	0xfffff44b		/* Port M Select Register */
-
-#define PMDIR		BYTE_REF(PMDIR_ADDR)
-#define PMDATA		BYTE_REF(PMDATA_ADDR)
-#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
-#define PMSEL		BYTE_REF(PMSEL_ADDR)
-
-#define PM(x)		(1 << (x))
-
-#define PM_SDCLK	0x01	/* Use SDCLK      as PM[0] */
-#define PM_SDCE		0x02	/* Use SDCE       as PM[1] */
-#define PM_DQMH 	0x04	/* Use DQMH       as PM[2] */
-#define PM_DQML 	0x08	/* Use DQML       as PM[3] */
-#define PM_SDA10        0x10	/* Use SDA10      as PM[4] */
-#define PM_DMOE 	0x20	/* Use DMOE       as PM[5] */
-
-/**********
- *
- * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
- *
- **********/
-
-/*
- * PWM Control Register
- */
-#define PWMC_ADDR	0xfffff500
-#define PWMC		WORD_REF(PWMC_ADDR)
-
-#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
-#define PWMC_CLKSEL_SHIFT	0
-#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
-#define PWMC_REPEAT_SHIFT	2
-#define PWMC_EN			0x0010	/* Enable PWM */
-#define PMNC_FIFOAV		0x0020	/* FIFO Available */
-#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
-#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
-#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
-#define PWMC_PRESCALER_SHIFT	8
-#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
-
-/* '328-compatible definitions */
-#define PWMC_PWMEN	PWMC_EN
-
-/*
- * PWM Sample Register 
- */
-#define PWMS_ADDR	0xfffff502
-#define PWMS		WORD_REF(PWMS_ADDR)
-
-/*
- * PWM Period Register
- */
-#define PWMP_ADDR	0xfffff504
-#define PWMP		BYTE_REF(PWMP_ADDR)
-
-/*
- * PWM Counter Register
- */
-#define PWMCNT_ADDR	0xfffff505
-#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
-
-/**********
- *
- * 0xFFFFF6xx -- General-Purpose Timer
- *
- **********/
-
-/* 
- * Timer Control register
- */
-#define TCTL_ADDR	0xfffff600
-#define TCTL		WORD_REF(TCTL_ADDR)
-
-#define	TCTL_TEN		0x0001	/* Timer Enable  */
-#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
-#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
-#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
-#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
-#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
-#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
-#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
-#define TCTL_OM			0x0020	/* Output Mode   */
-#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
-#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
-#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
-#define TCTL_FRR		0x0010	/* Free-Run Mode */
-
-/* '328-compatible definitions */
-#define TCTL1_ADDR	TCTL_ADDR
-#define TCTL1		TCTL
-
-/*
- * Timer Prescaler Register
- */
-#define TPRER_ADDR	0xfffff602
-#define TPRER		WORD_REF(TPRER_ADDR)
-
-/* '328-compatible definitions */
-#define TPRER1_ADDR	TPRER_ADDR
-#define TPRER1		TPRER
-
-/*
- * Timer Compare Register
- */
-#define TCMP_ADDR	0xfffff604
-#define TCMP		WORD_REF(TCMP_ADDR)
-
-/* '328-compatible definitions */
-#define TCMP1_ADDR	TCMP_ADDR
-#define TCMP1		TCMP
-
-/*
- * Timer Capture register
- */
-#define TCR_ADDR	0xfffff606
-#define TCR		WORD_REF(TCR_ADDR)
-
-/* '328-compatible definitions */
-#define TCR1_ADDR	TCR_ADDR
-#define TCR1		TCR
-
-/*
- * Timer Counter Register
- */
-#define TCN_ADDR	0xfffff608
-#define TCN		WORD_REF(TCN_ADDR)
-
-/* '328-compatible definitions */
-#define TCN1_ADDR	TCN_ADDR
-#define TCN1		TCN
-
-/*
- * Timer Status Register
- */
-#define TSTAT_ADDR	0xfffff60a
-#define TSTAT		WORD_REF(TSTAT_ADDR)
-
-#define TSTAT_COMP	0x0001		/* Compare Event occurred */
-#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
-
-/* '328-compatible definitions */
-#define TSTAT1_ADDR	TSTAT_ADDR
-#define TSTAT1		TSTAT
-
-/**********
- *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
- *
- **********/
-
-/*
- * SPIM Data Register
- */
-#define SPIMDATA_ADDR	0xfffff800
-#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
-
-/*
- * SPIM Control/Status Register
- */
-#define SPIMCONT_ADDR	0xfffff802
-#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
-
-#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
-#define SPIMCONT_BIT_COUNT_SHIFT 0
-#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
-#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
-#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
-#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
-#define SPIMCONT_XCH		 0x0100	/* Exchange */
-#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
-#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
-#define SPIMCONT_DATA_RATE_SHIFT 13
-
-/* '328-compatible definitions */
-#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
-#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
-
-/**********
- *
- * 0xFFFFF9xx -- UART
- *
- **********/
-
-/*
- * UART Status/Control Register
- */
-
-#define USTCNT_ADDR	0xfffff900
-#define USTCNT		WORD_REF(USTCNT_ADDR)
-
-#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
-#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
-#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
-#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
-#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
-#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
-#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
-#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
-#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
-#define USTCNT_STOP	0x0200	/* Stop bit transmission */
-#define USTCNT_ODD	0x0400	/* Odd Parity */
-#define	USTCNT_PEN	0x0800	/* Parity Enable */
-#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
-#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
-#define USTCNT_RXEN	0x4000	/* Receiver Enable */
-#define USTCNT_UEN	0x8000	/* UART Enable */
-
-/* '328-compatible definitions */
-#define USTCNT_TXAVAILEN	USTCNT_TXAE
-#define USTCNT_TXHALFEN		USTCNT_TXHE
-#define USTCNT_TXEMPTYEN	USTCNT_TXEE
-#define USTCNT_RXREADYEN	USTCNT_RXRE
-#define USTCNT_RXHALFEN		USTCNT_RXHE
-#define USTCNT_RXFULLEN		USTCNT_RXFE
-#define USTCNT_CTSDELTAEN	USTCNT_CTSD
-#define USTCNT_ODD_EVEN		USTCNT_ODD
-#define USTCNT_PARITYEN		USTCNT_PEN
-#define USTCNT_CLKMODE		USTCNT_CLKM
-#define USTCNT_UARTEN		USTCNT_UEN
-
-/*
- * UART Baud Control Register
- */
-#define UBAUD_ADDR	0xfffff902
-#define UBAUD		WORD_REF(UBAUD_ADDR)
-
-#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
-#define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
-#define UBAUD_DIVIDE_SHIFT	8
-#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
-#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
-
-/*
- * UART Receiver Register 
- */
-#define URX_ADDR	0xfffff904
-#define URX		WORD_REF(URX_ADDR)
-
-#define URX_RXDATA_ADDR	0xfffff905
-#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
-
-#define URX_RXDATA_MASK	 0x00ff	/* Received data */
-#define URX_RXDATA_SHIFT 0
-#define URX_PARITY_ERROR 0x0100	/* Parity Error */
-#define URX_BREAK	 0x0200	/* Break Detected */
-#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
-#define URX_OVRUN	 0x0800	/* Serial Overrun */
-#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
-#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
-#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
-#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
-
-/*
- * UART Transmitter Register 
- */
-#define UTX_ADDR	0xfffff906
-#define UTX		WORD_REF(UTX_ADDR)
-
-#define UTX_TXDATA_ADDR	0xfffff907
-#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
-
-#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
-#define UTX_TXDATA_SHIFT 0
-#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
-#define UTX_CTS_STAT	 0x0200	/* CTS State */
-#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
-#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
-#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
-#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
-#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
-#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
-
-/* '328-compatible definitions */
-#define UTX_CTS_STATUS	UTX_CTS_STAT
-#define UTX_IGNORE_CTS	UTX_NOCTS
-
-/*
- * UART Miscellaneous Register 
- */
-#define UMISC_ADDR	0xfffff908
-#define UMISC		WORD_REF(UMISC_ADDR)
-
-#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
-#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
-#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
-#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
-#define UMISC_RTS	 0x0040	/* Set RTS status */
-#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
-#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
-#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
-#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
-#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
-#define UMISC_CLKSRC	 0x4000	/* Clock Source */
-#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
-
-/* 
- * UART Non-integer Prescaler Register
- */
-#define NIPR_ADDR	0xfffff90a
-#define NIPR		WORD_REF(NIPR_ADDR)
-
-#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
-#define NIPR_STEP_VALUE_SHIFT	0
-#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
-#define NIPR_SELECT_SHIFT	8
-#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
-
-
-/* generalization of uart control registers to support multiple ports: */
-typedef struct {
-  volatile unsigned short int ustcnt;
-  volatile unsigned short int ubaud;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char rxdata;
-    } b;
-  } urx;
-  union {
-    volatile unsigned short int w;
-    struct {
-      volatile unsigned char status;
-      volatile unsigned char txdata;
-    } b;
-  } utx;
-  volatile unsigned short int umisc;
-  volatile unsigned short int nipr;
-  volatile unsigned short int hmark;
-  volatile unsigned short int unused;
-} __attribute__((packed)) m68328_uart;
-
-
-
-
-/**********
- *
- * 0xFFFFFAxx -- LCD Controller
- *
- **********/
-
-/*
- * LCD Screen Starting Address Register 
- */
-#define LSSA_ADDR	0xfffffa00
-#define LSSA		LONG_REF(LSSA_ADDR)
-
-#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
-
-/*
- * LCD Virtual Page Width Register 
- */
-#define LVPW_ADDR	0xfffffa05
-#define LVPW		BYTE_REF(LVPW_ADDR)
-
-/*
- * LCD Screen Width Register (not compatible with '328 !!!) 
- */
-#define LXMAX_ADDR	0xfffffa08
-#define LXMAX		WORD_REF(LXMAX_ADDR)
-
-#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
-
-/*
- * LCD Screen Height Register
- */
-#define LYMAX_ADDR	0xfffffa0a
-#define LYMAX		WORD_REF(LYMAX_ADDR)
-
-#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
-
-/*
- * LCD Cursor X Position Register
- */
-#define LCXP_ADDR	0xfffffa18
-#define LCXP		WORD_REF(LCXP_ADDR)
-
-#define LCXP_CC_MASK	0xc000		/* Cursor Control */
-#define   LCXP_CC_TRAMSPARENT	0x0000
-#define   LCXP_CC_BLACK		0x4000
-#define   LCXP_CC_REVERSED	0x8000
-#define   LCXP_CC_WHITE		0xc000
-#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
-
-/*
- * LCD Cursor Y Position Register
- */
-#define LCYP_ADDR	0xfffffa1a
-#define LCYP		WORD_REF(LCYP_ADDR)
-
-#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
-
-/*
- * LCD Cursor Width and Heigth Register
- */
-#define LCWCH_ADDR	0xfffffa1c
-#define LCWCH		WORD_REF(LCWCH_ADDR)
-
-#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
-#define LCWCH_CH_SHIFT	0
-#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
-#define LCWCH_CW_SHIFT	8
-
-/*
- * LCD Blink Control Register
- */
-#define LBLKC_ADDR	0xfffffa1f
-#define LBLKC		BYTE_REF(LBLKC_ADDR)
-
-#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
-#define LBLKC_BD_SHIFT	0
-#define LBLKC_BKEN	0x80	/* Blink Enabled */
-
-/*
- * LCD Panel Interface Configuration Register 
- */
-#define LPICF_ADDR	0xfffffa20
-#define LPICF		BYTE_REF(LPICF_ADDR)
-
-#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
-#define	  LPICF_GS_BW	   0x00
-#define   LPICF_GS_GRAY_4  0x01
-#define   LPICF_GS_GRAY_16 0x02
-#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
-#define   LPICF_PBSIZ_1	   0x00
-#define   LPICF_PBSIZ_2    0x04
-#define   LPICF_PBSIZ_4    0x08
-
-/*
- * LCD Polarity Configuration Register 
- */
-#define LPOLCF_ADDR	0xfffffa21
-#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
-
-#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
-#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
-#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
-#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
-
-/*
- * LACD (LCD Alternate Crystal Direction) Rate Control Register
- */
-#define LACDRC_ADDR	0xfffffa23
-#define LACDRC		BYTE_REF(LACDRC_ADDR)
-
-#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
-#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
-#define LACDRC_ACD_SHIFT 0
-
-/*
- * LCD Pixel Clock Divider Register
- */
-#define LPXCD_ADDR	0xfffffa25
-#define LPXCD		BYTE_REF(LPXCD_ADDR)
-
-#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
-#define LPXCD_PCD_SHIFT	0
-
-/*
- * LCD Clocking Control Register
- */
-#define LCKCON_ADDR	0xfffffa27
-#define LCKCON		BYTE_REF(LCKCON_ADDR)
-
-#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
-#define LCKCON_DWS_SHIFT 0
-#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
-#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
-
-/* '328-compatible definitions */
-#define LCKCON_DW_MASK  LCKCON_DWS_MASK
-#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
- 
-/*
- * LCD Refresh Rate Adjustment Register 
- */
-#define LRRA_ADDR	0xfffffa29
-#define LRRA		BYTE_REF(LRRA_ADDR)
-
-/*
- * LCD Panning Offset Register
- */
-#define LPOSR_ADDR	0xfffffa2d
-#define LPOSR		BYTE_REF(LPOSR_ADDR)
-
-#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
-#define LPOSR_POS_SHIFT	0
-
-/*
- * LCD Frame Rate Control Modulation Register
- */
-#define LFRCM_ADDR	0xfffffa31
-#define LFRCM		BYTE_REF(LFRCM_ADDR)
-
-#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
-#define LFRCM_YMOD_SHIFT 0
-#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
-#define LFRCM_XMOD_SHIFT 4
-
-/*
- * LCD Gray Palette Mapping Register
- */
-#define LGPMR_ADDR	0xfffffa33
-#define LGPMR		BYTE_REF(LGPMR_ADDR)
-
-#define LGPMR_G1_MASK	0x0f
-#define LGPMR_G1_SHIFT	0
-#define LGPMR_G2_MASK	0xf0
-#define LGPMR_G2_SHIFT	4
-
-/* 
- * PWM Contrast Control Register
- */
-#define PWMR_ADDR	0xfffffa36
-#define PWMR		WORD_REF(PWMR_ADDR)
-
-#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
-#define PWMR_PW_SHIFT	0
-#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
-#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
-#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
-#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
-#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
-
-/**********
- *
- * 0xFFFFFBxx -- Real-Time Clock (RTC)
- *
- **********/
-
-/*
- * RTC Hours Minutes and Seconds Register
- */
-#define RTCTIME_ADDR	0xfffffb00
-#define RTCTIME		LONG_REF(RTCTIME_ADDR)
-
-#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
-#define RTCTIME_SECONDS_SHIFT	0
-#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
-#define RTCTIME_MINUTES_SHIFT	16
-#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
-#define RTCTIME_HOURS_SHIFT	24
-
-/*
- *  RTC Alarm Register 
- */
-#define RTCALRM_ADDR    0xfffffb04
-#define RTCALRM         LONG_REF(RTCALRM_ADDR)
-
-#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
-#define RTCALRM_SECONDS_SHIFT   0
-#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
-#define RTCALRM_MINUTES_SHIFT   16
-#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
-#define RTCALRM_HOURS_SHIFT     24
-
-/*
- * Watchdog Timer Register 
- */
-#define WATCHDOG_ADDR	0xfffffb0a
-#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
-
-#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
-#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
-#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
-#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
-#define WATCHDOG_CNT_SHIFT 8
-
-/*
- * RTC Control Register
- */
-#define RTCCTL_ADDR	0xfffffb0c
-#define RTCCTL		WORD_REF(RTCCTL_ADDR)
-
-#define RTCCTL_XTL	0x0020	/* Crystal Selection */
-#define RTCCTL_EN	0x0080	/* RTC Enable */
-
-/* '328-compatible definitions */
-#define RTCCTL_384	RTCCTL_XTL
-#define RTCCTL_ENABLE	RTCCTL_EN
-
-/*
- * RTC Interrupt Status Register 
- */
-#define RTCISR_ADDR	0xfffffb0e
-#define RTCISR		WORD_REF(RTCISR_ADDR)
-
-#define RTCISR_SW	0x0001	/* Stopwatch timed out */
-#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
-#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
-#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
-#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
-#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
-#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
-#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
-#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
-#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
-#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
-#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
-
-/*
- * RTC Interrupt Enable Register
- */
-#define RTCIENR_ADDR	0xfffffb10
-#define RTCIENR		WORD_REF(RTCIENR_ADDR)
-
-#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
-#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
-#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
-#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
-#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
-#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
-#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
-#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
-#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
-#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
-#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
-#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
-#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
-#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
-
-/* 
- * Stopwatch Minutes Register
- */
-#define STPWCH_ADDR	0xfffffb12
-#define STPWCH		WORD_REF(STPWCH_ADDR)
-
-#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
-#define SPTWCH_CNT_SHIFT 0
-
-/*
- * RTC Day Count Register 
- */
-#define DAYR_ADDR	0xfffffb1a
-#define DAYR		WORD_REF(DAYR_ADDR)
-
-#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
-#define DAYR_DAYS_SHIFT 0
-
-/*
- * RTC Day Alarm Register 
- */
-#define DAYALARM_ADDR	0xfffffb1c
-#define DAYALARM	WORD_REF(DAYALARM_ADDR)
-
-#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
-#define DAYALARM_DAYSAL_SHIFT 	0
-
-/**********
- *
- * 0xFFFFFCxx -- DRAM Controller
- *
- **********/
-
-/*
- * DRAM Memory Configuration Register 
- */
-#define DRAMMC_ADDR	0xfffffc00
-#define DRAMMC		WORD_REF(DRAMMC_ADDR)
-
-#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
-#define   DRAMMC_ROW12_PA10	0x0000
-#define   DRAMMC_ROW12_PA21	0x4000	
-#define   DRAMMC_ROW12_PA23	0x8000
-#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
-#define	  DRAMMC_ROW0_PA11	0x0000
-#define   DRAMMC_ROW0_PA22	0x1000
-#define   DRAMMC_ROW0_PA23	0x2000
-#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
-#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
-#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
-#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
-#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
-#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
-#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
-#define DRAMMC_REF_SHIFT	0
-
-/*
- * DRAM Control Register
- */
-#define DRAMC_ADDR	0xfffffc02
-#define DRAMC		WORD_REF(DRAMC_ADDR)
-
-#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
-#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
-#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
-#define DRAMC_SLW	   0x0008	/* Slow RAM */
-#define DRAMC_LSP	   0x0010	/* Light Sleep */
-#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
-#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
-#define DRAMC_WS_SHIFT	   6
-#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
-#define DRAMC_PGSZ_SHIFT   8
-#define   DRAMC_PGSZ_256K  0x0000	
-#define   DRAMC_PGSZ_512K  0x0100
-#define   DRAMC_PGSZ_1024K 0x0200
-#define	  DRAMC_PGSZ_2048K 0x0300
-#define DRAMC_EDO	   0x0400	/* EDO DRAM */
-#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
-#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
-#define DRAMC_BC_SHIFT	   12
-#define DRAMC_RM	   0x4000	/* Refresh Mode */
-#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
-
-
-/**********
- *
- * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
- *
- **********/
-
-/*
- * ICE Module Address Compare Register
- */
-#define ICEMACR_ADDR	0xfffffd00
-#define ICEMACR		LONG_REF(ICEMACR_ADDR)
-
-/*
- * ICE Module Address Mask Register
- */
-#define ICEMAMR_ADDR	0xfffffd04
-#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
-
-/*
- * ICE Module Control Compare Register
- */
-#define ICEMCCR_ADDR	0xfffffd08
-#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
-
-#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
-#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
-
-/*
- * ICE Module Control Mask Register
- */
-#define ICEMCMR_ADDR	0xfffffd0a
-#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
-
-#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
-#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
-
-/*
- * ICE Module Control Register 
- */
-#define ICEMCR_ADDR	0xfffffd0c
-#define ICEMCR		WORD_REF(ICEMCR_ADDR)
-
-#define ICEMCR_CEN	0x0001	/* Compare Enable */
-#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
-#define ICEMCR_SB	0x0004	/* Single Breakpoint */
-#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
-#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
-
-/*
- * ICE Module Status Register 
- */
-#define ICEMSR_ADDR	0xfffffd0e
-#define ICEMSR		WORD_REF(ICEMSR_ADDR)
-
-#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
-#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
-#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
-#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
-
-#endif /* _MC68VZ328_H_ */
diff --git a/include/asm-m68knommu/a.out.h b/include/asm-m68knommu/a.out.h
deleted file mode 100644
index ce18ef99de04..000000000000
--- a/include/asm-m68knommu/a.out.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/a.out.h>
diff --git a/include/asm-m68knommu/anchor.h b/include/asm-m68knommu/anchor.h
deleted file mode 100644
index 871c0d5cfc3d..000000000000
--- a/include/asm-m68knommu/anchor.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/****************************************************************************/
-
-/*
- *	anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
- *
- *	(C) Copyright 2000, Moreton Bay (www.moreton.com.au)
- */
-
-/****************************************************************************/
-#ifndef	anchor_h
-#define	anchor_h
-/****************************************************************************/
-
-/*
- *	Define basic addressing info.
- */
-#if defined(CONFIG_M5407C3)
-#define	COMEM_BASE	0xFFFF0000	/* Base of CO-MEM address space */
-#define	COMEM_IRQ	25		/* IRQ of anchor part */
-#else
-#define	COMEM_BASE	0x80000000	/* Base of CO-MEM address space */
-#define	COMEM_IRQ	25		/* IRQ of anchor part */
-#endif
-
-/****************************************************************************/
-
-/*
- *	4-byte registers of CO-MEM, so adjust register addresses for
- *	easy access. Handy macro for word access too.
- */
-#define	LREG(a)		((a) >> 2)
-#define	WREG(a)		((a) >> 1)
-
-
-/*
- *	Define base addresses within CO-MEM Lite register address space.
- */
-#define	COMEM_I2O	0x0000		/* I2O registers */
-#define	COMEM_OPREGS	0x0400		/* Operation registers */
-#define	COMEM_PCIBUS	0x2000		/* Direct access to PCI bus */
-#define	COMEM_SHMEM	0x4000		/* Shared memory region */
-
-#define	COMEM_SHMEMSIZE	0x4000		/* Size of shared memory */
-
-
-/*
- *	Define CO-MEM Registers.
- */
-#define	COMEM_I2OHISR	0x0030		/* I2O host interrupt status */
-#define	COMEM_I2OHIMR	0x0034		/* I2O host interrupt mask */
-#define	COMEM_I2OLISR	0x0038		/* I2O local interrupt status */
-#define	COMEM_I2OLIMR	0x003c		/* I2O local interrupt mask */
-#define	COMEM_IBFPFIFO	0x0040		/* I2O inbound free/post FIFO */
-#define	COMEM_OBPFFIFO	0x0044		/* I2O outbound post/free FIFO */
-#define	COMEM_IBPFFIFO	0x0048		/* I2O inbound post/free FIFO */
-#define	COMEM_OBFPFIFO	0x004c		/* I2O outbound free/post FIFO */
-
-#define	COMEM_DAHBASE	0x0460		/* Direct access base address */
-
-#define	COMEM_NVCMD	0x04a0		/* I2C serial command */
-#define	COMEM_NVREAD	0x04a4		/* I2C serial read */
-#define	COMEM_NVSTAT	0x04a8		/* I2C status */
-
-#define	COMEM_DMALBASE	0x04b0		/* DMA local base address */
-#define	COMEM_DMAHBASE	0x04b4		/* DMA host base address */
-#define	COMEM_DMASIZE	0x04b8		/* DMA size */
-#define	COMEM_DMACTL	0x04bc		/* DMA control */
-
-#define	COMEM_HCTL	0x04e0		/* Host control */
-#define	COMEM_HINT	0x04e4		/* Host interrupt control/status */
-#define	COMEM_HLDATA	0x04e8		/* Host to local data mailbox */
-#define	COMEM_LINT	0x04f4		/* Local interrupt contole status */
-#define	COMEM_LHDATA	0x04f8		/* Local to host data mailbox */
-
-#define	COMEM_LBUSCFG	0x04fc		/* Local bus configuration */
-
-
-/*
- *	Commands and flags for use with Direct Access Register.
- */
-#define	COMEM_DA_IACK	0x00000000	/* Interrupt acknowledge (read) */
-#define	COMEM_DA_SPCL	0x00000010	/* Special cycle (write) */
-#define	COMEM_DA_MEMRD	0x00000004	/* Memory read cycle */
-#define	COMEM_DA_MEMWR	0x00000004	/* Memory write cycle */
-#define	COMEM_DA_IORD	0x00000002	/* I/O read cycle */
-#define	COMEM_DA_IOWR	0x00000002	/* I/O write cycle */
-#define	COMEM_DA_CFGRD	0x00000006	/* Configuration read cycle */
-#define	COMEM_DA_CFGWR	0x00000006	/* Configuration write cycle */
-
-#define	COMEM_DA_ADDR(a)	((a) & 0xffffe000)
-
-#define	COMEM_DA_OFFSET(a)	((a) & 0x00001fff)
-
-
-/*
- *	The PCI bus will be limited in what slots will actually be used.
- *	Define valid device numbers for different boards.
- */
-#if defined(CONFIG_M5407C3)
-#define	COMEM_MINDEV	14		/* Minimum valid DEVICE */
-#define	COMEM_MAXDEV	14		/* Maximum valid DEVICE */
-#define	COMEM_BRIDGEDEV	15		/* Slot bridge is in */
-#else
-#define	COMEM_MINDEV	0		/* Minimum valid DEVICE */
-#define	COMEM_MAXDEV	3		/* Maximum valid DEVICE */
-#endif
-
-#define	COMEM_MAXPCI	(COMEM_MAXDEV+1)	/* Maximum PCI devices */
-
-
-/****************************************************************************/
-#endif	/* anchor_h */
diff --git a/include/asm-m68knommu/atomic.h b/include/asm-m68knommu/atomic.h
deleted file mode 100644
index d5632a305dae..000000000000
--- a/include/asm-m68knommu/atomic.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_ATOMIC__
-#define __ARCH_M68KNOMMU_ATOMIC__
-
-#include <asm/system.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-/*
- * We do not have SMP m68k systems, so we don't have to deal with that.
- */
-
-typedef struct { int counter; } atomic_t;
-#define ATOMIC_INIT(i)	{ (i) }
-
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = i)
-
-static __inline__ void atomic_add(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
-#else
-	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ void atomic_sub(int i, atomic_t *v)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
-#else
-	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
-#endif
-}
-
-static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
-{
-	char c;
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__("subl %2,%1; seq %0"
-			     : "=d" (c), "+m" (*v)
-			     : "d" (i));
-#else
-	__asm__ __volatile__("subl %2,%1; seq %0"
-			     : "=d" (c), "+m" (*v)
-			     : "di" (i));
-#endif
-	return c != 0;
-}
-
-static __inline__ void atomic_inc(volatile atomic_t *v)
-{
-	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
-}
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-
-static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
-	return c != 0;
-}
-
-static __inline__ void atomic_dec(volatile atomic_t *v)
-{
-	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
-}
-
-static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
-{
-	char c;
-	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
-	return c != 0;
-}
-
-static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
-	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()    barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc()    barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-static inline int atomic_add_return(int i, atomic_t * v)
-{
-	unsigned long temp, flags;
-
-	local_irq_save(flags);
-	temp = *(long *)v;
-	temp += i;
-	*(long *)v = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-
-static inline int atomic_sub_return(int i, atomic_t * v)
-{
-	unsigned long temp, flags;
-
-	local_irq_save(flags);
-	temp = *(long *)v;
-	temp -= i;
-	*(long *)v = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-
-#include <asm-generic/atomic.h>
-#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/include/asm-m68knommu/auxvec.h b/include/asm-m68knommu/auxvec.h
deleted file mode 100644
index 844d6d52204b..000000000000
--- a/include/asm-m68knommu/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
diff --git a/include/asm-m68knommu/bitops.h b/include/asm-m68knommu/bitops.h
deleted file mode 100644
index c142fbf2f376..000000000000
--- a/include/asm-m68knommu/bitops.h
+++ /dev/null
@@ -1,306 +0,0 @@
-#ifndef _M68KNOMMU_BITOPS_H
-#define _M68KNOMMU_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h>	/* swab32 */
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
-
-static __inline__ void set_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0", "cc");
-#else
-	__asm__ __volatile__ ("bset %1,%0"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     : "cc");
-#endif
-}
-
-#define __set_bit(nr, addr) set_bit(nr, addr)
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0", "cc");
-#else
-	__asm__ __volatile__ ("bclr %1,%0"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     : "cc");
-#endif
-}
-
-#define __clear_bit(nr, addr) clear_bit(nr, addr)
-
-static __inline__ void change_bit(int nr, volatile unsigned long * addr)
-{
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0", "cc");
-#else
-	__asm__ __volatile__ ("bchg %1,%0"
-	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     : "cc");
-#endif
-}
-
-#define __change_bit(nr, addr) change_bit(nr, addr)
-
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bset %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
-
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bclr %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
-
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bchg %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
-
-/*
- * This routine doesn't need to be atomic.
- */
-static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
-{
-	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
-{
-	int 	* a = (int *) addr;
-	int	mask;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	return ((mask & *a) != 0);
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)))
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-static __inline__ int ext2_set_bit(int nr, volatile void * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bset %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("bclr %2,%1; sne %0"
-	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
-	     : "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define ext2_set_bit_atomic(lock, nr, addr)		\
-	({						\
-		int ret;				\
-		spin_lock(lock);			\
-		ret = ext2_set_bit((nr), (addr));	\
-		spin_unlock(lock);			\
-		ret;					\
-	})
-
-#define ext2_clear_bit_atomic(lock, nr, addr)		\
-	({						\
-		int ret;				\
-		spin_lock(lock);			\
-		ret = ext2_clear_bit((nr), (addr));	\
-		spin_unlock(lock);			\
-		ret;					\
-	})
-
-static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
-{
-	char retval;
-
-#ifdef CONFIG_COLDFIRE
-	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
-	     : "=d" (retval)
-	     : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
-	     : "%a0");
-#else
-	__asm__ __volatile__ ("btst %2,%1; sne %0"
-	     : "=d" (retval)
-	     : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
-	     /* No clobber */);
-#endif
-
-	return retval;
-}
-
-#define ext2_find_first_zero_bit(addr, size) \
-        ext2_find_next_zero_bit((addr), (size), 0)
-
-static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
-{
-	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
-	unsigned long result = offset & ~31UL;
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset &= 31UL;
-	if(offset) {
-		/* We hold the little endian value in tmp, but then the
-		 * shift is illegal. So we could keep a big endian value
-		 * in tmp, like this:
-		 *
-		 * tmp = __swab32(*(p++));
-		 * tmp |= ~0UL >> (32-offset);
-		 *
-		 * but this would decrease performance, so we change the
-		 * shift:
-		 */
-		tmp = *(p++);
-		tmp |= __swab32(~0UL >> (32-offset));
-		if(size < 32)
-			goto found_first;
-		if(~tmp)
-			goto found_middle;
-		size -= 32;
-		result += 32;
-	}
-	while(size & ~31UL) {
-		if(~(tmp = *(p++)))
-			goto found_middle;
-		result += 32;
-		size -= 32;
-	}
-	if(!size)
-		return result;
-	tmp = *p;
-
-found_first:
-	/* tmp is little endian, so we would have to swab the shift,
-	 * see above. But then we have to swab tmp below for ffz, so
-	 * we might as well do this here.
-	 */
-	return result + ffz(__swab32(tmp) | (~0UL << size));
-found_middle:
-	return result + ffz(__swab32(tmp));
-}
-
-#define ext2_find_next_bit(addr, size, off) \
-	generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _M68KNOMMU_BITOPS_H */
diff --git a/include/asm-m68knommu/bootinfo.h b/include/asm-m68knommu/bootinfo.h
deleted file mode 100644
index c12e526f5189..000000000000
--- a/include/asm-m68knommu/bootinfo.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-/* Nothing for m68knommu */
diff --git a/include/asm-m68knommu/bootstd.h b/include/asm-m68knommu/bootstd.h
deleted file mode 100644
index bdc1a4ac4fe9..000000000000
--- a/include/asm-m68knommu/bootstd.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* bootstd.h:  Bootloader system call interface
- *
- * (c) 1999, Rt-Control, Inc.
- */
-
-#ifndef __BOOTSTD_H__
-#define __BOOTSTD_H__
-
-#define NR_BSC 21            /* last used bootloader system call */
-
-#define __BN_reset        0  /* reset and start the bootloader */
-#define __BN_test         1  /* tests the system call interface */
-#define __BN_exec         2  /* executes a bootloader image */
-#define __BN_exit         3  /* terminates a bootloader image */
-#define __BN_program      4  /* program FLASH from a chain */
-#define __BN_erase        5  /* erase sector(s) of FLASH */
-#define __BN_open         6
-#define __BN_write        7
-#define __BN_read         8
-#define __BN_close        9
-#define __BN_mmap         10 /* map a file descriptor into memory */
-#define __BN_munmap       11 /* remove a file to memory mapping */
-#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
-#define __BN_getserialnum 13 /* get the serial number of this board */
-#define __BN_getbenv      14 /* get a bootloader envvar */
-#define __BN_setbenv      15 /* get a bootloader envvar */
-#define __BN_setpmask     16 /* set the protection mask */
-#define __BN_readenv      17 /* read environment variables */
-#define __BN_flash_chattr_range		18
-#define __BN_flash_erase_range		19
-#define __BN_flash_write_range		20
-
-/* Calling conventions compatible to (uC)linux/68k
- * We use simmilar macros to call into the bootloader as for uClinux
- */
-
-#define __bsc_return(type, res) \
-do { \
-   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
-      /* let errno be a function, preserve res in %d0 */ \
-      int __err = -(res); \
-      errno = __err; \
-      res = -1; \
-   } \
-   return (type)(res); \
-} while (0)
-
-#define _bsc0(type,name) \
-type name(void) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc1(type,name,atype,a) \
-type name(atype a) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc2(type,name,atype,a,btype,b) \
-type name(atype a, btype b) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
-type name(atype a, btype b, ctype c) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
-type name(atype a, btype b, ctype c, dtype d) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   register long __d __asm__ ("%d4") = (long)d; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c), "d" (__d) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
-type name(atype a, btype b, ctype c, dtype d, etype e) \
-{ \
-   register long __res __asm__ ("%d0") = __BN_##name; \
-   register long __a __asm__ ("%d1") = (long)a; \
-   register long __b __asm__ ("%d2") = (long)b; \
-   register long __c __asm__ ("%d3") = (long)c; \
-   register long __d __asm__ ("%d4") = (long)d; \
-   register long __e __asm__ ("%d5") = (long)e; \
-   __asm__ __volatile__ ("trap #2" \
-                         : "=g" (__res) \
-                         : "0" (__res), "d" (__a), "d" (__b), \
-                           "d" (__c), "d" (__d), "d" (__e) \
-                         ); \
-   __bsc_return(type,__res); \
-}
-
-#endif /* __BOOTSTD_H__ */
diff --git a/include/asm-m68knommu/bug.h b/include/asm-m68knommu/bug.h
deleted file mode 100644
index 70e7dc0af21a..000000000000
--- a/include/asm-m68knommu/bug.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _M68KNOMMU_BUG_H
-#define _M68KNOMMU_BUG_H
-#include <asm-generic/bug.h>
-#endif
diff --git a/include/asm-m68knommu/bugs.h b/include/asm-m68knommu/bugs.h
deleted file mode 100644
index 5f382dac3a60..000000000000
--- a/include/asm-m68knommu/bugs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  include/asm-m68k/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/include/asm-m68knommu/byteorder.h b/include/asm-m68knommu/byteorder.h
deleted file mode 100644
index 8fcde907b0f9..000000000000
--- a/include/asm-m68knommu/byteorder.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _M68KNOMMU_BYTEORDER_H
-#define _M68KNOMMU_BYTEORDER_H
-
-#include <asm/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/include/asm-m68knommu/cache.h b/include/asm-m68knommu/cache.h
deleted file mode 100644
index 24e9eace5f8c..000000000000
--- a/include/asm-m68knommu/cache.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_CACHE_H
-#define __ARCH_M68KNOMMU_CACHE_H
-
-/* bytes per L1 cache line */
-#define        L1_CACHE_BYTES  16	/* this need to be at least 1 */
-
-/* m68k-elf-gcc  2.95.2 doesn't like these */
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif
diff --git a/include/asm-m68knommu/cachectl.h b/include/asm-m68knommu/cachectl.h
deleted file mode 100644
index bcf5a6a9dd52..000000000000
--- a/include/asm-m68knommu/cachectl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/cachectl.h>
diff --git a/include/asm-m68knommu/cacheflush.h b/include/asm-m68knommu/cacheflush.h
deleted file mode 100644
index 87e5dc0413b4..000000000000
--- a/include/asm-m68knommu/cacheflush.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _M68KNOMMU_CACHEFLUSH_H
-#define _M68KNOMMU_CACHEFLUSH_H
-
-/*
- * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
- */
-#include <linux/mm.h>
-
-#define flush_cache_all()			__flush_cache_all()
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	__flush_cache_all()
-#define flush_cache_page(vma, vmaddr)		do { } while (0)
-#define flush_dcache_range(start,len)		__flush_cache_all()
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start,len)		__flush_cache_all()
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-static inline void __flush_cache_all(void)
-{
-#ifdef CONFIG_M5407
-	/*
-	 *	Use cpushl to push and invalidate all cache lines.
-	 *	Gas doesn't seem to know how to generate the ColdFire
-	 *	cpushl instruction... Oh well, bit stuff it for now.
-	 */
-	__asm__ __volatile__ (
-		"nop\n\t"
-		"clrl	%%d0\n\t"
-		"1:\n\t"
-		"movel	%%d0,%%a0\n\t"
-		"2:\n\t"
-		".word	0xf468\n\t"
-		"addl	#0x10,%%a0\n\t"
-		"cmpl	#0x00000800,%%a0\n\t"
-		"blt	2b\n\t"
-		"addql	#1,%%d0\n\t"
-		"cmpil	#4,%%d0\n\t"
-		"bne	1b\n\t"
-		"movel	#0xb6088500,%%d0\n\t"
-		"movec	%%d0,%%CACR\n\t"
-		: : : "d0", "a0" );
-#endif /* CONFIG_M5407 */
-#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
-	__asm__ __volatile__ (
-		"movel	#0x81000200, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M527x || CONFIG_M528x */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-	__asm__ __volatile__ (
-		"movel	#0x81000100, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-#ifdef CONFIG_M5249
-	__asm__ __volatile__ (
-		"movel	#0xa1000200, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M5249 */
-#ifdef CONFIG_M532x
-	__asm__ __volatile__ (
-		"movel	#0x81000200, %%d0\n\t"
-		"movec	%%d0, %%CACR\n\t"
-		"nop\n\t"
-		: : : "d0" );
-#endif /* CONFIG_M532x */
-}
-
-#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/include/asm-m68knommu/checksum.h b/include/asm-m68knommu/checksum.h
deleted file mode 100644
index 81883482ffb1..000000000000
--- a/include/asm-m68knommu/checksum.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-	int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
-	void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-#ifdef CONFIG_COLDFIRE
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	return (__force __sum16)~tmp;
-#else
-	__asm__("swap %1\n\t"
-		"addw %1, %0\n\t"
-		"clrw %1\n\t"
-		"addxw %1, %0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "0" (sum), "1" (sum));
-	return (__force __sum16)~sum;
-#endif
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("addl  %1,%0\n\t"
-		 "addxl %4,%0\n\t"
-		 "addxl %5,%0\n\t"
-		 "clrl %1\n\t"
-		 "addxl %1,%0"
-		 : "=&d" (sum), "=&d" (saddr)
-		 : "0" (daddr), "1" (saddr), "d" (len + proto),
-		   "d"(sum));
-	return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
-{
-	register unsigned long tmp;
-	__asm__("addl %2@,%0\n\t"
-		"movel %2@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@,%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"addxl %4,%0\n\t"
-		"clrl %1\n\t"
-		"addxl %1,%0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "a" (saddr), "a" (daddr), "d" (len + proto),
-		  "0" (sum));
-
-	return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/include/asm-m68knommu/coldfire.h b/include/asm-m68knommu/coldfire.h
deleted file mode 100644
index 83a9fa4e618a..000000000000
--- a/include/asm-m68knommu/coldfire.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/****************************************************************************/
-
-/*
- *	coldfire.h -- Motorola ColdFire CPU sepecific defines
- *
- *	(C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	coldfire_h
-#define	coldfire_h
-/****************************************************************************/
-
-
-/*
- *	Define master clock frequency. This is essentially done at config
- *	time now. No point enumerating dozens of possible clock options
- *	here. Also the peripheral clock (bus clock) divide ratio is set
- *	at config time too.
- */
-#ifdef CONFIG_CLOCK_SET
-#define	MCF_CLK		CONFIG_CLOCK_FREQ
-#define	MCF_BUSCLK	(CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
-#else
-#error "Don't know what your ColdFire CPU clock frequency is??"
-#endif
-
-/*
- *	Define the processor support peripherals base address.
- *	This is generally setup by the boards start up code.
- */
-#define	MCF_MBAR	0x10000000
-#define	MCF_MBAR2	0x80000000
-#if defined(CONFIG_M520x)
-#define	MCF_IPSBAR	0xFC000000
-#else
-#define	MCF_IPSBAR	0x40000000
-#endif
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x)
-#undef MCF_MBAR
-#define	MCF_MBAR	MCF_IPSBAR
-#elif defined(CONFIG_M532x)
-#undef MCF_MBAR
-#define MCF_MBAR	0x00000000
-#endif
-
-/****************************************************************************/
-#endif	/* coldfire_h */
diff --git a/include/asm-m68knommu/commproc.h b/include/asm-m68knommu/commproc.h
deleted file mode 100644
index 36e870b468ef..000000000000
--- a/include/asm-m68knommu/commproc.h
+++ /dev/null
@@ -1,722 +0,0 @@
-
-/*
- * 68360 Communication Processor Module.
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
- *
- * This file contains structures and information for the communication
- * processor channels.  Some CPM control and status is available
- * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
- * This file is not a complete map of all of the 360 QUICC's capabilities
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM_360__
-#define __CPM_360__
-
-
-/* CPM Command register masks: */
-#define CPM_CR_RST	((ushort)0x8000)
-#define CPM_CR_OPCODE	((ushort)0x0f00)
-#define CPM_CR_CHAN	((ushort)0x00f0)
-#define CPM_CR_FLG	((ushort)0x0001)
-
-/* CPM Command set (opcodes): */
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
-#define CPM_CR_GCI_ABORT	((ushort)0x000a)
-#define CPM_CR_RESET_BCS	((ushort)0x000a)
-
-/* CPM Channel numbers. */
-#define CPM_CR_CH_SCC1	((ushort)0x0000)
-#define CPM_CR_CH_SCC2	((ushort)0x0004)
-#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
-#define CPM_CR_CH_TMR	((ushort)0x0005)
-#define CPM_CR_CH_SCC3	((ushort)0x0008)
-#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
-#define CPM_CR_CH_IDMA1	((ushort)0x0009)
-#define CPM_CR_CH_SCC4	((ushort)0x000c)
-#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
-#define CPM_CR_CH_IDMA2	((ushort)0x000d)
-
-
-#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
-
-#if 1 /* mleslie: I dinna think we have any such restrictions on
-       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
-
-/* The dual ported RAM is multi-functional.  Some areas can be (and are
- * being) used for microcode.  There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
-#define CPM_DATAONLY_BASE	((uint)0x0000)
-#define CPM_DATAONLY_SIZE	((uint)0x0800)
-#define CPM_DP_NOSPACE		((uint)0x7fffffff)
-
-#endif
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram. */
-/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
-extern QUICC *pquicc;
-uint         m360_cpm_dpalloc(uint size);
-/* void         *m360_cpm_hostalloc(uint size); */
-void	      m360_cpm_setbrg(uint brg, uint rate);
-
-#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-	ushort	cbd_sc;		/* Status and Control */
-	ushort	cbd_datlen;	/* Data length in buffer */
-	uint	cbd_bufaddr;	/* Buffer address in host memory */
-} cbd_t;
-#endif
-
-
-/* rx bd status/control bits */
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
-#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
-#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
-#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
-
-#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
-#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
-
-#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
-#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
-
-#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
-#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
-
-#define BD_SC_BR	((ushort)0x0020)	/* Break received */
-#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
-
-#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
-#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
-
-#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
-#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
-
-#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
-#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
-
-/* tx bd status/control bits (as differ from rx bd) */
-#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
-#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
-#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
-#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
-
-
-
-
-/* Parameter RAM offsets. */
-
-
-
-/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
- * In 2.0, we use a more structured C struct map of DPRAM, and so 
- * instead, we need only a parameter ram `slot'  */
-
-#define PRSLOT_SCC1	0
-#define PRSLOT_SCC2	1
-#define PRSLOT_SCC3	2
-#define PRSLOT_SMC1	2
-#define PRSLOT_SCC4	3
-#define PRSLOT_SMC2	3
-
-
-/* #define PROFF_SCC1	((uint)0x0000) */
-/* #define PROFF_SCC2	((uint)0x0100) */
-/* #define PROFF_SCC3	((uint)0x0200) */
-/* #define PROFF_SMC1	((uint)0x0280) */
-/* #define PROFF_SCC4	((uint)0x0300) */
-/* #define PROFF_SMC2	((uint)0x0380) */
-
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
-	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	smc_rfcr;	/* Rx function code */
-	u_char	smc_tfcr;	/* Tx function code */
-	ushort	smc_mrblr;	/* Max receive buffer length */
-	uint	smc_rstate;	/* Internal */
-	uint	smc_idp;	/* Internal */
-	ushort	smc_rbptr;	/* Internal */
-	ushort	smc_ibc;	/* Internal */
-	uint	smc_rxtmp;	/* Internal */
-	uint	smc_tstate;	/* Internal */
-	uint	smc_tdp;	/* Internal */
-	ushort	smc_tbptr;	/* Internal */
-	ushort	smc_tbc;	/* Internal */
-	uint	smc_txtmp;	/* Internal */
-	ushort	smc_maxidl;	/* Maximum idle characters */
-	ushort	smc_tmpidl;	/* Temporary idle counter */
-	ushort	smc_brklen;	/* Last received break length */
-	ushort	smc_brkec;	/* rcv'd break condition counter */
-	ushort	smc_brkcr;	/* xmt break count register */
-	ushort	smc_rmask;	/* Temporary bit mask */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define	SMCMR_REN	((ushort)0x0001)
-#define SMCMR_TEN	((ushort)0x0002)
-#define SMCMR_DM	((ushort)0x000c)
-#define SMCMR_SM_GCI	((ushort)0x0000)
-#define SMCMR_SM_UART	((ushort)0x0020)
-#define SMCMR_SM_TRANS	((ushort)0x0030)
-#define SMCMR_SM_MASK	((ushort)0x0030)
-#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
-#define SMCMR_REVD	SMCMR_PM_EVEN
-#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
-#define SMCMR_BS	SMCMR_PEN
-#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
-#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
-#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer.  It is half duplex, in that
- * it can only receive or transmit.  The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
-	ushort	scent_rbase;
-	ushort	scent_tbase;
-	u_char	scent_cfcr;
-	u_char	scent_smask;
-	ushort	scent_mrblr;
-	uint	scent_rstate;
-	uint	scent_r_ptr;
-	ushort	scent_rbptr;
-	ushort	scent_r_cnt;
-	uint	scent_rtemp;
-	uint	scent_tstate;
-	uint	scent_t_ptr;
-	ushort	scent_tbptr;
-	ushort	scent_t_cnt;
-	uint	scent_ttemp;
-	ushort	scent_max_sl;
-	ushort	scent_sl_cnt;
-	ushort	scent_character1;
-	ushort	scent_character2;
-	ushort	scent_character3;
-	ushort	scent_character4;
-	ushort	scent_character5;
-	ushort	scent_character6;
-	ushort	scent_character7;
-	ushort	scent_character8;
-	ushort	scent_rccm;
-	ushort	scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F	((u_char)0x08)
-#define SMC_CENT_PE	((u_char)0x04)
-#define SMC_CENT_S	((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
-#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
-#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
-#define	SMCM_BSY	((unsigned char)0x04)
-#define	SMCM_TX		((unsigned char)0x02)
-#define	SMCM_RX		((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP		((uint)0x00040000)
-#define SCC_GSMRH_GDE		((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
-#define SCC_GSMRH_REVD		((uint)0x00002000)
-#define SCC_GSMRH_TRX		((uint)0x00001000)
-#define SCC_GSMRH_TTX		((uint)0x00000800)
-#define SCC_GSMRH_CDP		((uint)0x00000400)
-#define SCC_GSMRH_CTSP		((uint)0x00000200)
-#define SCC_GSMRH_CDS		((uint)0x00000100)
-#define SCC_GSMRH_CTSS		((uint)0x00000080)
-#define SCC_GSMRH_TFL		((uint)0x00000040)
-#define SCC_GSMRH_RFW		((uint)0x00000020)
-#define SCC_GSMRH_TXSY		((uint)0x00000010)
-#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8		((uint)0x00000008)
-#define SCC_GSMRH_SYNL4		((uint)0x00000004)
-#define SCC_GSMRH_RTSM		((uint)0x00000002)
-#define SCC_GSMRH_RSYN		((uint)0x00000001)
-
-#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
-#define SCC_GSMRL_TCI		((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
-#define SCC_GSMRL_RINV		((uint)0x02000000)
-#define SCC_GSMRL_TINV		((uint)0x01000000)
-#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48	((uint)0x00800000)
-#define SCC_GSMRL_TPL_32	((uint)0x00600000)
-#define SCC_GSMRL_TPL_16	((uint)0x00400000)
-#define SCC_GSMRL_TPL_8		((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
-#define SCC_GSMRL_TPP_01	((uint)0x00100000)
-#define SCC_GSMRL_TPP_10	((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
-#define SCC_GSMRL_TEND		((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
-#define SCC_GSMRL_ENR		((uint)0x00000020)
-#define SCC_GSMRL_ENT		((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
-
-#define SCC_TODR_TOD		((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define	SCCM_TXE	((unsigned char)0x10)
-#define	SCCM_BSY	((unsigned char)0x04)
-#define	SCCM_TX		((unsigned char)0x02)
-#define	SCCM_RX		((unsigned char)0x01)
-
-typedef struct scc_param {
-	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	scc_rfcr;	/* Rx function code */
-	u_char	scc_tfcr;	/* Tx function code */
-	ushort	scc_mrblr;	/* Max receive buffer length */
-	uint	scc_rstate;	/* Internal */
-	uint	scc_idp;	/* Internal */
-	ushort	scc_rbptr;	/* Internal */
-	ushort	scc_ibc;	/* Internal */
-	uint	scc_rxtmp;	/* Internal */
-	uint	scc_tstate;	/* Internal */
-	uint	scc_tdp;	/* Internal */
-	ushort	scc_tbptr;	/* Internal */
-	ushort	scc_tbc;	/* Internal */
-	uint	scc_txtmp;	/* Internal */
-	uint	scc_rcrc;	/* Internal */
-	uint	scc_tcrc;	/* Internal */
-} sccp_t;
-
-
-/* Function code bits.
- */
-#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
-#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
-	sccp_t	sen_genscc;
-	uint	sen_cpres;	/* Preset CRC */
-	uint	sen_cmask;	/* Constant mask for CRC */
-	uint	sen_crcec;	/* CRC Error counter */
-	uint	sen_alec;	/* alignment error counter */
-	uint	sen_disfc;	/* discard frame counter */
-	ushort	sen_pads;	/* Tx short frame pad character */
-	ushort	sen_retlim;	/* Retry limit threshold */
-	ushort	sen_retcnt;	/* Retry limit counter */
-	ushort	sen_maxflr;	/* maximum frame length register */
-	ushort	sen_minflr;	/* minimum frame length register */
-	ushort	sen_maxd1;	/* maximum DMA1 length */
-	ushort	sen_maxd2;	/* maximum DMA2 length */
-	ushort	sen_maxd;	/* Rx max DMA */
-	ushort	sen_dmacnt;	/* Rx DMA counter */
-	ushort	sen_maxb;	/* Max BD byte count */
-	ushort	sen_gaddr1;	/* Group address filter */
-	ushort	sen_gaddr2;
-	ushort	sen_gaddr3;
-	ushort	sen_gaddr4;
-	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf0rba;	/* Internal */
-	uint	sen_tbuf0crc;	/* Internal */
-	ushort	sen_tbuf0bcnt;	/* Internal */
-	ushort	sen_paddrh;	/* physical address (MSB) */
-	ushort	sen_paddrm;
-	ushort	sen_paddrl;	/* physical address (LSB) */
-	ushort	sen_pper;	/* persistence */
-	ushort	sen_rfbdptr;	/* Rx first BD pointer */
-	ushort	sen_tfbdptr;	/* Tx first BD pointer */
-	ushort	sen_tlbdptr;	/* Tx last BD pointer */
-	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf1rba;	/* Internal */
-	uint	sen_tbuf1crc;	/* Internal */
-	ushort	sen_tbuf1bcnt;	/* Internal */
-	ushort	sen_txlen;	/* Tx Frame length counter */
-	ushort	sen_iaddr1;	/* Individual address filter */
-	ushort	sen_iaddr2;
-	ushort	sen_iaddr3;
-	ushort	sen_iaddr4;
-	ushort	sen_boffcnt;	/* Backoff counter */
-
-	/* NOTE: Some versions of the manual have the following items
-	 * incorrectly documented.  Below is the proper order.
-	 */
-	ushort	sen_taddrh;	/* temp address (MSB) */
-	ushort	sen_taddrm;
-	ushort	sen_taddrl;	/* temp address (LSB) */
-} scc_enet_t;
-
-
-
-#if defined (CONFIG_UCQUICC)
-/* uCquicc has the following signals connected to Ethernet:
- *  68360    - lxt905
- * PA0/RXD1  - rxd
- * PA1/TXD1  - txd
- * PA8/CLK1  - tclk
- * PA9/CLK2  - rclk
- * PC0/!RTS1 - t_en
- * PC1/!CTS1 - col
- * PC5/!CD1  - cd
- */
-#define PA_ENET_RXD	PA_RXD1
-#define PA_ENET_TXD	PA_TXD1
-#define PA_ENET_TCLK	PA_CLK1
-#define PA_ENET_RCLK	PA_CLK2
-#define PC_ENET_TENA	PC_RTS1
-#define PC_ENET_CLSN	PC_CTS1
-#define PC_ENET_RENA	PC_CD1
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-
-#endif /* config_ucquicc */
-
-
-#ifdef MBX
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
- * to the MBX860 board.  Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PC_ENET_TENA	((ushort)0x0001)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-#endif
-
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-#endif
-
-#ifdef CONFIG_BSEIP
-/* This ENET stuff is for the MPC823 with ethernet on SCC2.
- * This is unique to the BSE ip-Engine board.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* BSE uses port B and C bits for PHY control also.
-*/
-#define PB_BSE_POWERUP	((uint)0x00000004)
-#define PB_BSE_FDXDIS	((uint)0x00008000)
-#define PC_BSE_LOOPBACK	((ushort)0x0800)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002c00)
-#endif
-
-#ifdef CONFIG_RPXCLASSIC
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-#endif
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
-#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
-#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
-#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
-#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
-#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
-#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
-#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
-#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
-#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
-#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
-#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
-#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
-#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
-#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
-#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
-#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY	((ushort)0x8000)
-#define BD_ENET_RX_WRAP		((ushort)0x2000)
-#define BD_ENET_RX_INTR		((ushort)0x1000)
-#define BD_ENET_RX_LAST		((ushort)0x0800)
-#define BD_ENET_RX_FIRST	((ushort)0x0400)
-#define BD_ENET_RX_MISS		((ushort)0x0100)
-#define BD_ENET_RX_LG		((ushort)0x0020)
-#define BD_ENET_RX_NO		((ushort)0x0010)
-#define BD_ENET_RX_SH		((ushort)0x0008)
-#define BD_ENET_RX_CR		((ushort)0x0004)
-#define BD_ENET_RX_OV		((ushort)0x0002)
-#define BD_ENET_RX_CL		((ushort)0x0001)
-#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY	((ushort)0x8000)
-#define BD_ENET_TX_PAD		((ushort)0x4000)
-#define BD_ENET_TX_WRAP		((ushort)0x2000)
-#define BD_ENET_TX_INTR		((ushort)0x1000)
-#define BD_ENET_TX_LAST		((ushort)0x0800)
-#define BD_ENET_TX_TC		((ushort)0x0400)
-#define BD_ENET_TX_DEF		((ushort)0x0200)
-#define BD_ENET_TX_HB		((ushort)0x0100)
-#define BD_ENET_TX_LC		((ushort)0x0080)
-#define BD_ENET_TX_RL		((ushort)0x0040)
-#define BD_ENET_TX_RCMASK	((ushort)0x003c)
-#define BD_ENET_TX_UN		((ushort)0x0002)
-#define BD_ENET_TX_CSL		((ushort)0x0001)
-#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-	sccp_t	scc_genscc;
-	uint	scc_res1;	/* Reserved */
-	uint	scc_res2;	/* Reserved */
-	ushort	scc_maxidl;	/* Maximum idle chars */
-	ushort	scc_idlc;	/* temp idle counter */
-	ushort	scc_brkcr;	/* Break count register */
-	ushort	scc_parec;	/* receive parity error counter */
-	ushort	scc_frmec;	/* receive framing error counter */
-	ushort	scc_nosec;	/* receive noise counter */
-	ushort	scc_brkec;	/* receive break condition counter */
-	ushort	scc_brkln;	/* last received break length */
-	ushort	scc_uaddr1;	/* UART address character 1 */
-	ushort	scc_uaddr2;	/* UART address character 2 */
-	ushort	scc_rtemp;	/* Temp storage */
-	ushort	scc_toseq;	/* Transmit out of sequence char */
-	ushort	scc_char1;	/* control character 1 */
-	ushort	scc_char2;	/* control character 2 */
-	ushort	scc_char3;	/* control character 3 */
-	ushort	scc_char4;	/* control character 4 */
-	ushort	scc_char5;	/* control character 5 */
-	ushort	scc_char6;	/* control character 6 */
-	ushort	scc_char7;	/* control character 7 */
-	ushort	scc_char8;	/* control character 8 */
-	ushort	scc_rccm;	/* receive control character mask */
-	ushort	scc_rccr;	/* receive control character register */
-	ushort	scc_rlbc;	/* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR		((ushort)0x1000)
-#define UART_SCCM_GLT		((ushort)0x0800)
-#define UART_SCCM_AB		((ushort)0x0200)
-#define UART_SCCM_IDL		((ushort)0x0100)
-#define UART_SCCM_GRA		((ushort)0x0080)
-#define UART_SCCM_BRKE		((ushort)0x0040)
-#define UART_SCCM_BRKS		((ushort)0x0020)
-#define UART_SCCM_CCR		((ushort)0x0008)
-#define UART_SCCM_BSY		((ushort)0x0004)
-#define UART_SCCM_TX		((ushort)0x0002)
-#define UART_SCCM_RX		((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PMSR_FLC		((ushort)0x8000)
-#define SCU_PMSR_SL		((ushort)0x4000)
-#define SCU_PMSR_CL		((ushort)0x3000)
-#define SCU_PMSR_UM		((ushort)0x0c00)
-#define SCU_PMSR_FRZ		((ushort)0x0200)
-#define SCU_PMSR_RZS		((ushort)0x0100)
-#define SCU_PMSR_SYN		((ushort)0x0080)
-#define SCU_PMSR_DRT		((ushort)0x0040)
-#define SCU_PMSR_PEN		((ushort)0x0010)
-#define SCU_PMSR_RPM		((ushort)0x000c)
-#define SCU_PMSR_REVP		((ushort)0x0008)
-#define SCU_PMSR_TPM		((ushort)0x0003)
-#define SCU_PMSR_TEVP		((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-	sccp_t	st_genscc;
-	uint	st_cpres;	/* Preset CRC */
-	uint	st_cmask;	/* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST		((ushort)0x0800)
-
-
-
-/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
- * channels or devices.  All of these are presented to the PPC core
- * as a single interrupt.  The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler.  We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-/* #define CPMVEC_NR		32 */
-/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
-/* #define	CPMVEC_SCC1		((ushort)0x1e) */
-/* #define	CPMVEC_SCC2		((ushort)0x1d) */
-/* #define	CPMVEC_SCC3		((ushort)0x1c) */
-/* #define	CPMVEC_SCC4		((ushort)0x1b) */
-/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
-/* #define	CPMVEC_TIMER1		((ushort)0x19) */
-/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
-/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
-/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_I2C		((ushort)0x10) */
-/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
-/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
-/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
-/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
-/* #define	CPMVEC_SPI		((ushort)0x05) */
-/* #define	CPMVEC_SMC1		((ushort)0x04) */
-/* #define	CPMVEC_SMC2		((ushort)0x03) */
-/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
-/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
-/* #define	CPMVEC_ERROR		((ushort)0x00) */
-
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
-#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
-#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
-#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
-#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
-#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
-#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
-#endif /* __CPM_360__ */
diff --git a/include/asm-m68knommu/cputime.h b/include/asm-m68knommu/cputime.h
deleted file mode 100644
index a0c4a660878d..000000000000
--- a/include/asm-m68knommu/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_CPUTIME_H
-#define __M68KNOMMU_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/include/asm-m68knommu/current.h b/include/asm-m68knommu/current.h
deleted file mode 100644
index 53ee0f9f7cef..000000000000
--- a/include/asm-m68knommu/current.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _M68KNOMMU_CURRENT_H
-#define _M68KNOMMU_CURRENT_H
-/*
- *	current.h
- *	(C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *	rather than dedicate a register (as the m68k source does), we
- *	just keep a global,  we should probably just change it all to be
- *	current and lose _current_task.
- */
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
-	return(current_thread_info()->task);
-}
-
-#define	current	get_current()
-
-#endif /* _M68KNOMMU_CURRENT_H */
diff --git a/include/asm-m68knommu/dbg.h b/include/asm-m68knommu/dbg.h
deleted file mode 100644
index 27af3270f671..000000000000
--- a/include/asm-m68knommu/dbg.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#define DEBUG 1
-#ifdef CONFIG_COLDFIRE
-#define	BREAK asm volatile ("halt")
-#else
-#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
-#endif
diff --git a/include/asm-m68knommu/delay.h b/include/asm-m68knommu/delay.h
deleted file mode 100644
index 55cbd6294ab6..000000000000
--- a/include/asm-m68knommu/delay.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _M68KNOMMU_DELAY_H
-#define _M68KNOMMU_DELAY_H
-
-/*
- * Copyright (C) 1994 Hamish Macdonald
- * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/param.h>
-
-static inline void __delay(unsigned long loops)
-{
-#if defined(CONFIG_COLDFIRE)
-	/* The coldfire runs this loop at significantly different speeds
-	 * depending upon long word alignment or not.  We'll pad it to
-	 * long word alignment which is the faster version.
-	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
-	 * than using a NOP (0x4e71) instruction because it executes in one
-	 * cycle not three and doesn't allow for an arbitary delay waiting
-	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
-	 * stall waiting for the register to become valid if such is added
-	 * to the coldfire at some stage.
-	 */
-	__asm__ __volatile__ (	".balignw 4, 0x4a8e\n\t"
-				"1: subql #1, %0\n\t"
-				"jcc 1b"
-		: "=d" (loops) : "0" (loops));
-#else
-	__asm__ __volatile__ (	"1: subql #1, %0\n\t"
-				"jcc 1b"
-		: "=d" (loops) : "0" (loops));
-#endif
-}
-
-/*
- *	Ideally we use a 32*32->64 multiply to calculate the number of
- *	loop iterations, but the older standard 68k and ColdFire do not
- *	have this instruction. So for them we have a clsoe approximation
- *	loop using 32*32->32 multiplies only. This calculation based on
- *	the ARM version of delay.
- *
- *	We want to implement:
- *
- *	loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
- */
-
-#define	HZSCALE		(268435456 / (1000000/HZ))
-
-extern unsigned long loops_per_jiffy;
-
-static inline void _udelay(unsigned long usecs)
-{
-#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
-    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
-    defined(CONFIG_COLDFIRE)
-	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
-#else
-	unsigned long tmp;
-
-	usecs *= 4295;		/* 2**32 / 1000000 */
-	__asm__ ("mulul %2,%0:%1"
-		: "=d" (usecs), "=d" (tmp)
-		: "d" (usecs), "1" (loops_per_jiffy*HZ));
-	__delay(usecs);
-#endif
-}
-
-/*
- *	Moved the udelay() function into library code, no longer inlined.
- *	I had to change the algorithm because we are overflowing now on
- *	the faster ColdFire parts. The code is a little bigger, so it makes
- *	sense to library it.
- */
-extern void udelay(unsigned long usecs);
-
-#endif /* defined(_M68KNOMMU_DELAY_H) */
diff --git a/include/asm-m68knommu/device.h b/include/asm-m68knommu/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-m68knommu/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-m68knommu/div64.h b/include/asm-m68knommu/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-m68knommu/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-m68knommu/dma-mapping.h b/include/asm-m68knommu/dma-mapping.h
deleted file mode 100644
index 6aeab18e58bd..000000000000
--- a/include/asm-m68knommu/dma-mapping.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _M68KNOMMU_DMA_MAPPING_H
-#define _M68KNOMMU_DMA_MAPPING_H
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif  /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/include/asm-m68knommu/dma.h b/include/asm-m68knommu/dma.h
deleted file mode 100644
index 939a02056217..000000000000
--- a/include/asm-m68knommu/dma.h
+++ /dev/null
@@ -1,494 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
- 
-//#define	DMA_DEBUG	1
-
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- *               Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
-	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	            0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD          2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG          4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         5
-/* I/O to memory, 8 bits, single-address-mode */     
-#define DMA_MODE_READ_SINGLE        8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE       9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE  10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE  12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01  
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06 
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF  0x01  
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10  
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60  
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF  0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG  0x00
-#define DMA_MODE_SIZE_BYTE  0x01
-#define DMA_MODE_SIZE_WORD  0x02
-#define DMA_MODE_SIZE_LINE  0x03
-
-/* 
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned char  *dmapb;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmapb = (unsigned char *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
-  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned char  *dmabp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
-  dmabp = (unsigned char *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
-
-  // Set command register
-  dmawp[MCFDMA_DCR] =
-    MCFDMA_DCR_INT |         // Enable completion irq
-    MCFDMA_DCR_CS |          // Force one xfer per request
-    MCFDMA_DCR_AA |          // Enable auto alignment
-    // single-address-mode
-    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
-    // sets s_rw (-> r/w) high if Memory to I/0
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
-    // Memory to I/O or I/O to Memory
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
-    // 32 bit, 16 bit or 8 bit transfers
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
-                                   MCFDMA_DCR_SSIZE_BYTE)) |
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
-                                   MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
-	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_SAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
-	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
-	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  unsigned short count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  count = dmawp[MCFDMA_BCR];
-  return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping.  For instance, with the exception of the 16-bit 
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA.  All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose.  This puts a crimp in distinguishing between the 'device 
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value.  Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit.  Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned int  *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned int   *dmalp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
-
-  // Set command register
-  dmalp[MCFDMA_DMR] =
-    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
-    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
-    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
-    // source static-address-mode
-    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
-    // dest static-address-mode
-    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
-    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-    
-  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
-  
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
-	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_DSAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DDAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
-	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
-	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned int *dmalp;
-  
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned int *dmalp;
-  unsigned int count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  count = dmalp[MCFDMA_DBCR];
-  return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
- 
-#define MAX_DMA_CHANNELS 8
-
-/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
-   occurrence should be flagged as an error.  */
-/* under 2.4 it is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
- 
-#endif /* _M68K_DMA_H */
diff --git a/include/asm-m68knommu/elf.h b/include/asm-m68knommu/elf.h
deleted file mode 100644
index 27f0ec70fba8..000000000000
--- a/include/asm-m68knommu/elf.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef __ASMm68k_ELF_H
-#define __ASMm68k_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * 68k ELF relocation types
- */
-#define R_68K_NONE  0
-#define R_68K_32    1
-#define R_68K_16    2
-#define R_68K_8     3
-#define R_68K_PC32  4
-#define R_68K_PC16  5
-#define R_68K_PC8   6
-#define R_68K_GOT32 7
-#define R_68K_GOT16 8
-#define R_68K_GOT8  9
-#define R_68K_GOT32O    10
-#define R_68K_GOT16O    11
-#define R_68K_GOT8O 12
-#define R_68K_PLT32 13
-#define R_68K_PLT16 14
-#define R_68K_PLT8  15
-#define R_68K_PLT32O    16
-#define R_68K_PLT16O    17
-#define R_68K_PLT8O 18
-#define R_68K_COPY  19
-#define R_68K_GLOB_DAT  20
-#define R_68K_JMP_SLOT  21
-#define R_68K_RELATIVE  22
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_m68kfp_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_68K)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_68K
-
-/* For SVR4/m68k the function pointer to be registered with `atexit' is
-   passed in %a1.  Although my copy of the ABI has no such statement, it
-   is actually used on ASV.  */
-#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         0xD0000000UL
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
-	/* Bleech. */							\
-	pr_reg[0] = regs->d1;						\
-	pr_reg[1] = regs->d2;						\
-	pr_reg[2] = regs->d3;						\
-	pr_reg[3] = regs->d4;						\
-	pr_reg[4] = regs->d5;						\
-	pr_reg[7] = regs->a0;						\
-	pr_reg[8] = regs->a1;						\
-	pr_reg[14] = regs->d0;						\
-	pr_reg[15] = rdusp();						\
-	pr_reg[16] = 0 /* regs->orig_d0 */;				\
-	pr_reg[17] = regs->sr;						\
-	pr_reg[18] = regs->pc;						\
-	/* pr_reg[19] = (regs->format << 12) | regs->vector; */		\
-	{								\
-	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
-	  pr_reg[5] = sw->d6;						\
-	  pr_reg[6] = sw->d7;						\
-	  pr_reg[10] = sw->a3;						\
-	  pr_reg[11] = sw->a4;						\
-	  pr_reg[12] = sw->a5;						\
-	  pr_reg[13] = sw->a6;						\
-	}
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM  (NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-
-#endif
diff --git a/include/asm-m68knommu/elia.h b/include/asm-m68knommu/elia.h
deleted file mode 100644
index e037d4e2de33..000000000000
--- a/include/asm-m68knommu/elia.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/****************************************************************************/
-
-/*
- *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
- *
- *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
- *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	elia_h
-#define	elia_h
-/****************************************************************************/
-
-#include <asm/coldfire.h>
-
-#ifdef CONFIG_eLIA
-
-/*
- *	The serial port DTR and DCD lines are also on the Parallel I/O
- *	as well, so define those too.
- */
-
-#define	eLIA_DCD1		0x0001
-#define	eLIA_DCD0		0x0002
-#define	eLIA_DTR1		0x0004
-#define	eLIA_DTR0		0x0008
-
-#define	eLIA_PCIRESET		0x0020
-
-/*
- *	Kernel macros to set and unset the LEDs.
- */
-#ifndef __ASSEMBLY__
-extern unsigned short	ppdata;
-#endif /* __ASSEMBLY__ */
-
-#endif	/* CONFIG_eLIA */
-
-/****************************************************************************/
-#endif	/* elia_h */
diff --git a/include/asm-m68knommu/emergency-restart.h b/include/asm-m68knommu/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-m68knommu/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-m68knommu/entry.h b/include/asm-m68knommu/entry.h
deleted file mode 100644
index c2553d26273d..000000000000
--- a/include/asm-m68knommu/entry.h
+++ /dev/null
@@ -1,182 +0,0 @@
-#ifndef __M68KNOMMU_ENTRY_H
-#define __M68KNOMMU_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- *	 0(sp) - d1
- *	 4(sp) - d2
- *	 8(sp) - d3
- *	 C(sp) - d4
- *	10(sp) - d5
- *	14(sp) - a0
- *	18(sp) - a1
- *	1C(sp) - a2
- *	20(sp) - d0
- *	24(sp) - orig_d0
- *	28(sp) - stack adjustment
- *	2C(sp) - [ sr              ] [ format & vector ]
- *	2E(sp) - [ pc-hiword       ] [ sr              ]
- *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
- *	32(sp) - [ format & vector ] [ pc-loword       ]
- *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
- *			M68K		  COLDFIRE
- */
-
-#define ALLOWINT 0xf8ff
-
-#ifdef __ASSEMBLY__
-
-/* process bits for task_struct.flags */
-PF_TRACESYS_OFF = 3
-PF_TRACESYS_BIT = 5
-PF_PTRACED_OFF = 3
-PF_PTRACED_BIT = 4
-PF_DTRACE_OFF = 1
-PF_DTRACE_BIT = 5
-
-LENOSYS = 38
-
-#define SWITCH_STACK_SIZE (6*4+4)	/* Includes return address */
-
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs are a2-a6 and d6-d7 preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-#ifdef CONFIG_COLDFIRE
-/*
- * This is made a little more tricky on the ColdFire. There is no
- * separate kernel and user stack pointers. Need to artificially
- * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things could happen.
- */
-.macro SAVE_ALL
-	move	#0x2700,%sr		/* disable intrs */
-	btst	#5,%sp@(2)		/* from user? */
-	bnes	6f			/* no, skip */
-	movel	%sp,sw_usp		/* save user sp */
-	addql	#8,sw_usp		/* remove exception */
-	movel	sw_ksp,%sp		/* kernel sp */
-	subql	#8,%sp			/* room for exception */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	movel	sw_usp,%a0		/* get usp */
-	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
-	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
-	bra	7f
-	6:
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-	7:
-.endm
-
-.macro RESTORE_ALL
-	btst	#5,%sp@(PT_SR)		/* going user? */
-	bnes	8f			/* no, skip */
-	move	#0x2700,%sr		/* disable intrs */
-	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	addql	#8,%sp			/* remove exception */
-	movel	%sp,sw_ksp		/* save ksp */
-	subql	#8,sw_usp		/* set exception */
-	movel	sw_usp,%sp		/* restore usp */
-	rte
-	8:
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-/*
- * Quick exception save, use current stack only.
- */
-.macro SAVE_LOCAL
-	move	#0x2700,%sr		/* disable intrs */
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	lea	%sp@(-32),%sp		/* space for 8 regs */
-	moveml	%d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro RESTORE_LOCAL
-	moveml	%sp@,%d1-%d5/%a0-%a2
-	lea	%sp@(32),%sp		/* space for 8 regs */
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-.macro SAVE_SWITCH_STACK
-	lea	%sp@(-24),%sp		/* 6 regs */
-	moveml	%a3-%a6/%d6-%d7,%sp@
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@,%a3-%a6/%d6-%d7
-	lea	%sp@(24),%sp		/* 6 regs */
-.endm
-
-/*
- * Software copy of the user and kernel stack pointers... Ugh...
- * Need these to get around ColdFire not having separate kernel
- * and user stack pointers.
- */
-.globl sw_usp
-.globl sw_ksp
-
-#else /* !CONFIG_COLDFIRE */
-
-/*
- * Standard 68k interrupt entry and exit macros.
- */
-.macro SAVE_ALL
-	clrl	%sp@-			/* stkadj */
-	movel	%d0,%sp@-		/* orig d0 */
-	movel	%d0,%sp@-		/* d0 */
-	moveml	%d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro RESTORE_ALL
-	moveml	%sp@+,%a0-%a2/%d1-%d5
-	movel	%sp@+,%d0
-	addql	#4,%sp			/* orig d0 */
-	addl	%sp@+,%sp		/* stkadj */
-	rte
-.endm
-
-.macro SAVE_SWITCH_STACK
-	moveml	%a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro RESTORE_SWITCH_STACK
-	moveml	%sp@+,%a3-%a6/%d6-%d7
-.endm
-
-#endif /* !CONFIG_COLDFIRE */
-#endif /* __ASSEMBLY__ */
-#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/include/asm-m68knommu/errno.h b/include/asm-m68knommu/errno.h
deleted file mode 100644
index 7e8c22b9a5e6..000000000000
--- a/include/asm-m68knommu/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/errno.h>
diff --git a/include/asm-m68knommu/fb.h b/include/asm-m68knommu/fb.h
deleted file mode 100644
index c7df38030992..000000000000
--- a/include/asm-m68knommu/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-m68knommu/fcntl.h b/include/asm-m68knommu/fcntl.h
deleted file mode 100644
index f6a552cda4cd..000000000000
--- a/include/asm-m68knommu/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/fcntl.h>
diff --git a/include/asm-m68knommu/flat.h b/include/asm-m68knommu/flat.h
deleted file mode 100644
index 814b5174a8e0..000000000000
--- a/include/asm-m68knommu/flat.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-m68knommu/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __M68KNOMMU_FLAT_H__
-#define __M68KNOMMU_FLAT_H__
-
-#define	flat_stack_align(sp)			/* nothing needed */
-#define	flat_argvp_envp_on_stack()		1
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		0
-
-#endif /* __M68KNOMMU_FLAT_H__ */
diff --git a/include/asm-m68knommu/fpu.h b/include/asm-m68knommu/fpu.h
deleted file mode 100644
index b16b2e4fca2a..000000000000
--- a/include/asm-m68knommu/fpu.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __M68KNOMMU_FPU_H
-#define __M68KNOMMU_FPU_H
-
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-#define FPSTATESIZE (216/sizeof(unsigned char))
-#elif defined(CONFIG_M68040)
-#define FPSTATESIZE (96/sizeof(unsigned char))
-#elif defined(CONFIG_M68KFPU_EMU)
-#define FPSTATESIZE (28/sizeof(unsigned char))
-#elif defined(CONFIG_M68060)
-#define FPSTATESIZE (12/sizeof(unsigned char))
-#else
-/* Assume no FP unit present then... */
-#define FPSTATESIZE (2) /* dummy size */
-#endif
-
-#endif /* __M68K_FPU_H */
diff --git a/include/asm-m68knommu/futex.h b/include/asm-m68knommu/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/include/asm-m68knommu/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-m68knommu/hardirq.h b/include/asm-m68knommu/hardirq.h
deleted file mode 100644
index bfad28149a49..000000000000
--- a/include/asm-m68knommu/hardirq.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __M68K_HARDIRQ_H
-#define __M68K_HARDIRQ_H
-
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* __M68K_HARDIRQ_H */
diff --git a/include/asm-m68knommu/hw_irq.h b/include/asm-m68knommu/hw_irq.h
deleted file mode 100644
index f3ec9e5ae049..000000000000
--- a/include/asm-m68knommu/hw_irq.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __M68KNOMMU_HW_IRQ_H__
-#define __M68KNOMMU_HW_IRQ_H__
-
-#endif /* __M68KNOMMU_HW_IRQ_H__ */
diff --git a/include/asm-m68knommu/hwtest.h b/include/asm-m68knommu/hwtest.h
deleted file mode 100644
index 700626a1b1bf..000000000000
--- a/include/asm-m68knommu/hwtest.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/hwtest.h>
diff --git a/include/asm-m68knommu/io.h b/include/asm-m68knommu/io.h
deleted file mode 100644
index 6adef1ee2082..000000000000
--- a/include/asm-m68knommu/io.h
+++ /dev/null
@@ -1,194 +0,0 @@
-#ifndef _M68KNOMMU_IO_H
-#define _M68KNOMMU_IO_H
-
-#ifdef __KERNEL__
-
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-static inline unsigned short _swapw(volatile unsigned short v)
-{
-    return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned int _swapl(volatile unsigned long v)
-{
-    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-#define readb(addr) \
-    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
-    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
-    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline void io_outsb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*ap = *bp++;
-}
-
-static inline void io_outsw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*ap = _swapl(*bp++);
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*bp++ = *ap;
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*bp++ = _swapl(*ap);
-}
-
-#define mmiowb()
-
-/*
- *	make the short names macros so specific devices
- *	can override them as required
- */
-
-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-#define inb(addr)    readb(addr)
-#define inw(addr)    readw(addr)
-#define inl(addr)    readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING		0
-#define IOMAP_NOCACHE_SER		1
-#define IOMAP_NOCACHE_NONSER		2
-#define IOMAP_WRITETHROUGH		3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-/* Pages to physical address... */
-#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr)	((void *) (vaddr))
-#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_IO_H */
diff --git a/include/asm-m68knommu/ioctl.h b/include/asm-m68knommu/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-m68knommu/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-m68knommu/ioctls.h b/include/asm-m68knommu/ioctls.h
deleted file mode 100644
index 0b1eb4d85059..000000000000
--- a/include/asm-m68knommu/ioctls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ioctls.h>
diff --git a/include/asm-m68knommu/ipcbuf.h b/include/asm-m68knommu/ipcbuf.h
deleted file mode 100644
index e4a7be6dd706..000000000000
--- a/include/asm-m68knommu/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ipcbuf.h>
diff --git a/include/asm-m68knommu/irq.h b/include/asm-m68knommu/irq.h
deleted file mode 100644
index 9373c31ac87d..000000000000
--- a/include/asm-m68knommu/irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define	SYS_IRQS	256
-#define	NR_IRQS		SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS	8
-#define NR_IRQS		(24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq)	(irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
diff --git a/include/asm-m68knommu/irq_regs.h b/include/asm-m68knommu/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-m68knommu/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-m68knommu/kdebug.h b/include/asm-m68knommu/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/include/asm-m68knommu/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-m68knommu/kmap_types.h b/include/asm-m68knommu/kmap_types.h
deleted file mode 100644
index bfb6707575d1..000000000000
--- a/include/asm-m68knommu/kmap_types.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_M68K_KMAP_TYPES_H
-#define __ASM_M68K_KMAP_TYPES_H
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
-
-#endif
diff --git a/include/asm-m68knommu/kvm.h b/include/asm-m68knommu/kvm.h
deleted file mode 100644
index b49d4258dabb..000000000000
--- a/include/asm-m68knommu/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_M68KNOMMU_H
-#define __LINUX_KVM_M68KNOMMU_H
-
-/* m68knommu does not support KVM */
-
-#endif
diff --git a/include/asm-m68knommu/linkage.h b/include/asm-m68knommu/linkage.h
deleted file mode 100644
index c288a19ff489..000000000000
--- a/include/asm-m68knommu/linkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/linkage.h>
diff --git a/include/asm-m68knommu/local.h b/include/asm-m68knommu/local.h
deleted file mode 100644
index 84a39c1b86f8..000000000000
--- a/include/asm-m68knommu/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_LOCAL_H
-#define __M68KNOMMU_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/include/asm-m68knommu/m5206sim.h b/include/asm-m68knommu/m5206sim.h
deleted file mode 100644
index 7e3594dea88b..000000000000
--- a/include/asm-m68knommu/m5206sim.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5206sim.h -- ColdFire 5206 System Integration Module support.
- *
- *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	m5206sim_h
-#define	m5206sim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5206 SIM register set addresses.
- */
-#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
-#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
-#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
-#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
-#ifdef CONFIG_M5206e
-#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
-#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
-#endif
-
-#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
-#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
-
-#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
-
-#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
-
-#define	MCFSIM_DCRR		0x46		/* DRAM Refresh reg (r/w) */
-#define	MCFSIM_DCTR		0x4a		/* DRAM Timing reg (r/w) */
-#define	MCFSIM_DAR0		0x4c		/* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DMR0		0x50		/* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCR0		0x57		/* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DAR1		0x58		/* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCR1		0x63		/* DRAM 1 Control reg (r/w) */
-
-#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
-#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
-#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
-#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
-#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
-#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
-#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
-#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
-#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
-#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
-#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
-#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
-#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
-#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
-#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
-#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
-#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
-#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
-#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
-#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
-#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
-#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
-#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
-#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
-#define	MCFSIM_DMCR		0xc6		/* Default control */
-
-#ifdef CONFIG_M5206e
-#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
-#else
-#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
-#endif
-
-#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#ifdef CONFIG_M5206e
-#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
-                                                /* Clear to select T0 input */
-#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
-                                                /* Clear to select T0 output */
-#endif
-
-/*
- *	Some symbol defines for the Interrupt Control Register
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
-#ifdef CONFIG_M5206e
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR14	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
-#endif
-
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
-#endif
-
-/*
- *	Macro to get and set IMR register. It is 16 bits on the 5206.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
-
-#define	mcf_getipr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-#endif	/* m5206sim_h */
diff --git a/include/asm-m68knommu/m520xsim.h b/include/asm-m68knommu/m520xsim.h
deleted file mode 100644
index 49d016e6391a..000000000000
--- a/include/asm-m68knommu/m520xsim.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/****************************************************************************/
-
-/*
- *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
- *
- *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
- */
-
-/****************************************************************************/
-#ifndef m520xsim_h
-#define m520xsim_h
-/****************************************************************************/
-
-
-/*
- *  Define the 5282 SIM register set addresses.
- */
-#define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
-#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
-#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
-#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
-#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
-#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
-#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
-#define MCFINTC_ICR0        0x40        /* Base ICR register */
-
-#define MCFINT_VECBASE      64
-#define MCFINT_UART0        26          /* Interrupt number for UART0 */
-#define MCFINT_UART1        27          /* Interrupt number for UART1 */
-#define MCFINT_UART2        28          /* Interrupt number for UART2 */
-#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
-#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
-
-/*
- *  SDRAM configuration registers.
- */
-#define MCFSIM_SDMR         0x000a8000	/* SDRAM Mode/Extended Mode Register */
-#define MCFSIM_SDCR         0x000a8004	/* SDRAM Control Register */
-#define MCFSIM_SDCFG1       0x000a8008	/* SDRAM Configuration Register 1 */
-#define MCFSIM_SDCFG2       0x000a800c	/* SDRAM Configuration Register 2 */
-#define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
-#define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
-
-
-#define MCF_GPIO_PAR_UART                   (0xA4036)
-#define MCF_GPIO_PAR_FECI2C                 (0xA4033)
-#define MCF_GPIO_PAR_FEC                    (0xA4038)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
-
-#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
-
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
-
-#define ICR_INTRCONF		0x05
-#define MCFPIT_IMR		MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
-
-/****************************************************************************/
-#endif  /* m520xsim_h */
diff --git a/include/asm-m68knommu/m523xsim.h b/include/asm-m68knommu/m523xsim.h
deleted file mode 100644
index bf397313e93f..000000000000
--- a/include/asm-m68knommu/m523xsim.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m523xsim.h -- ColdFire 523x System Integration Module support.
- *
- *	(C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef	m523xsim_h
-#define	m523xsim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 523x SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
-#define MCFINT_QSPI		18		/* Interrupt number for QSPI */
-
-/*
- *	SDRAM configuration registers.
- */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
-
-/****************************************************************************/
-#endif	/* m523xsim_h */
diff --git a/include/asm-m68knommu/m5249sim.h b/include/asm-m68knommu/m5249sim.h
deleted file mode 100644
index 366eb8602d2f..000000000000
--- a/include/asm-m68knommu/m5249sim.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m5249sim_h
-#define	m5249sim_h
-/****************************************************************************/
-
-/*
- *	Define the 5249 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
-
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-/*
- *	General purpose IO registers (in MBAR2).
- */
-#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
-#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
-#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
-#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
-#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
-#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
-#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
-#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
-
-#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
-#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
-#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
-
-#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
-#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
-#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
-#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
-#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
-#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
-#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
-#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
-
-#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
-
-#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
-#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
-
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5249.
- */
-#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
-
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- *	The M5249C3 board needs a little help getting all its SIM devices
- *	initialized at kernel start time. dBUG doesn't set much up, so
- *	we need to do it manually.
- */
-.macro m5249c3_setup
-	/*
-	 *	Set MBAR1 and MBAR2, just incase they are not set.
-	 */
-	movel	#0x10000001,%a0
-	movec	%a0,%MBAR			/* map MBAR region */
-	subql	#1,%a0				/* get MBAR address in a0 */
-
-	movel	#0x80000001,%a1
-	movec	%a1,#3086			/* map MBAR2 region */
-	subql	#1,%a1				/* get MBAR2 address in a1 */
-
-	/*
-	 *      Move secondary interrupts to base at 128.
-	 */
-	moveb	#0x80,%d0
-	moveb	%d0,0x16b(%a1)			/* interrupt base register */
-
-	/*
-	 *      Work around broken CSMR0/DRAM vector problem.
-	 */
-	movel	#0x001F0021,%d0			/* disable C/I bit */
-	movel	%d0,0x84(%a0)			/* set CSMR0 */
-
-	/*
-	 *	Disable the PLL firstly. (Who knows what state it is
-	 *	in here!).
-	 */
-	movel	0x180(%a1),%d0			/* get current PLL value */
-	andl	#0xfffffffe,%d0			/* PLL bypass first */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
-	/*
-	 *	Set initial clock frequency. This assumes M5249C3 board
-	 *	is fitted with 11.2896MHz crystal. It will program the
-	 *	PLL for 140MHz. Lets go fast :-)
-	 */
-	movel	#0x125a40f0,%d0			/* set for 140MHz */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	orl	#0x1,%d0
-	movel	%d0,0x180(%a1)			/* set PLL register */
-#endif
-
-	/*
-	 *	Setup CS1 for ethernet controller.
-	 *	(Setup as per M5249C3 doco).
-	 */
-	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
-	movel  %d0,0x8c(%a0)
-	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
-	movel  %d0,0x90(%a0)
-	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
-	movew  %d0,0x96(%a0)
-
-	/*
-	 *	Setup CS2 for IDE interface.
-	 */
-	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
-	movel	%d0,0x98(%a0)
-	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
-	movel	%d0,0x9c(%a0)
-	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
-	movew	%d0,0xa2(%a0)
-
-	movel	#0x00107000,%d0			/* IDEconfig1 */
-	movel	%d0,0x18c(%a1)
-	movel	#0x000c0400,%d0			/* IDEconfig2 */
-	movel	%d0,0x190(%a1)
-
-	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
-	orl	%d0,0xc(%a1)			/* function GPIO19 */
-	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
-        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
-.endm
-
-#define	PLATFORM_SETUP	m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif	/* m5249sim_h */
diff --git a/include/asm-m68knommu/m5272sim.h b/include/asm-m68knommu/m5272sim.h
deleted file mode 100644
index 6217edc21139..000000000000
--- a/include/asm-m68knommu/m5272sim.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5272sim.h -- ColdFire 5272 System Integration Module support.
- *
- *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	m5272sim_h
-#define	m5272sim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5272 SIM register set addresses.
- */
-#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
-#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
-#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
-#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
-#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
-
-#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
-
-#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
-#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
-#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
-#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
-
-#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
-#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
-#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
-#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
-
-#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
-#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
-#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
-#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
-#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
-#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
-#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
-#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
-#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
-#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
-#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
-#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
-#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
-#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
-#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
-#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
-
-#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
-#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
-#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
-
-#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
-#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
-#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
-#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
-#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
-#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
-#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
-#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
-#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
-
-
-/****************************************************************************/
-#endif	/* m5272sim_h */
diff --git a/include/asm-m68knommu/m527xsim.h b/include/asm-m68knommu/m527xsim.h
deleted file mode 100644
index 1f63ab3fb3e6..000000000000
--- a/include/asm-m68knommu/m527xsim.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
- *
- *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m527xsim_h
-#define	m527xsim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5270/5271 SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
-#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
-#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
-
-/*
- *	SDRAM configuration registers.
- */
-#ifdef CONFIG_M5271
-#define	MCFSIM_DCR		0x40		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
-#endif
-#ifdef CONFIG_M5275
-#define	MCFSIM_DMR		0x40		/* SDRAM mode */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DCFG1		0x48		/* SDRAM configuration 1 */
-#define	MCFSIM_DCFG2		0x4c		/* SDRAM configuration 2 */
-#define	MCFSIM_DBAR0		0x50		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x54		/* SDRAM address mask 0 */
-#define	MCFSIM_DBAR1		0x58		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
-#endif
-
-/*
- *	GPIO pins setups to enable the UARTs.
- */
-#ifdef CONFIG_M5271
-#define MCF_GPIO_PAR_UART	0x100048	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x0ff0
-#define UART2_ENABLE_MASK	0x3000
-#endif
-#ifdef CONFIG_M5275
-#define MCF_GPIO_PAR_UART	0x10007c	/* PAR UART address */
-#define UART0_ENABLE_MASK	0x000f
-#define UART1_ENABLE_MASK	0x00f0
-#define UART2_ENABLE_MASK	0x3f00 
-#endif
-
-/****************************************************************************/
-#endif	/* m527xsim_h */
diff --git a/include/asm-m68knommu/m528xsim.h b/include/asm-m68knommu/m528xsim.h
deleted file mode 100644
index 28bf783a5d6d..000000000000
--- a/include/asm-m68knommu/m528xsim.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
- *
- *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m528xsim_h
-#define	m528xsim_h
-/****************************************************************************/
-
-
-/*
- *	Define the 5280/5282 SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_VECBASE		64		/* Vector base number */
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
-
-/*
- *	SDRAM configuration registers.
- */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
-
-/*
- *	Derek Cheung - 6 Feb 2005
- *		add I2C and QSPI register definition using Freescale's MCF5282
- */
-/* set Port AS pin for I2C or UART */
-#define MCF5282_GPIO_PASPAR     (volatile u16 *) (MCF_IPSBAR + 0x00100056)
-
-/* Port UA Pin Assignment Register (8 Bit) */
-#define MCF5282_GPIO_PUAPAR	0x10005C
-
-/* Interrupt Mask Register Register Low */ 
-#define MCF5282_INTC0_IMRL      (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
-/* Interrupt Control Register 7 */
-#define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
-
-
-
-/*********************************************************************
-*
-* Inter-IC (I2C) Module
-*
-*********************************************************************/
-/* Read/Write access macros for general use */
-#define MCF5282_I2C_I2ADR       (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address 
-#define MCF5282_I2C_I2FDR       (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
-#define MCF5282_I2C_I2CR        (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
-#define MCF5282_I2C_I2SR        (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
-#define MCF5282_I2C_I2DR        (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF5282_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF5282_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF5282_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF5282_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF5282_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF5282_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF5282_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF5282_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF5282_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF5282_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF5282_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF5282_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF5282_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF5282_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR        MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR      MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR        MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR        MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR        MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR        MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR        MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR                           (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE                          (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16                        (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8                         (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9                         (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10                        (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11                        (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12                        (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13                        (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14                        (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15                        (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL                           (0x0200)
-#define MCF5282_QSPI_QMR_CPHA                           (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x)                        (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE                          (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x)                       (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x)                       (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT                           (0x8000)
-#define MCF5282_QSPI_QWR_WREN                           (0x4000)
-#define MCF5282_QSPI_QWR_WRTO                           (0x2000)
-#define MCF5282_QSPI_QWR_CSIV                           (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x)                       (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x)                       (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x)                       (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB                          (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB                          (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL                          (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE                          (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE                          (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE                          (0x0100)
-#define MCF5282_QSPI_QIR_WCEF                           (0x0008)
-#define MCF5282_QSPI_QIR_ABRT                           (0x0004)
-#define MCF5282_QSPI_QIR_SPIF                           (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x)                        (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x)                     (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x)                        (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT                           (0x8000)
-#define MCF5282_QSPI_QCR_BITSE                          (0x4000)
-#define MCF5282_QSPI_QCR_DT                             (0x2000)
-#define MCF5282_QSPI_QCR_DSCK                           (0x1000)
-#define MCF5282_QSPI_QCR_CS                             (((x)&0x000F)<<8)
-
-/****************************************************************************/
-#endif	/* m528xsim_h */
diff --git a/include/asm-m68knommu/m5307sim.h b/include/asm-m68knommu/m5307sim.h
deleted file mode 100644
index 5886728409c0..000000000000
--- a/include/asm-m68knommu/m5307sim.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5307sim.h -- ColdFire 5307 System Integration Module support.
- *
- *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
- *	(C) Copyright 1999,  Lineo (www.lineo.com)
- *
- *      Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef	m5307sim_h
-#define	m5307sim_h
-/****************************************************************************/
-
-/*
- *	Define the 5307 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-
-#ifdef CONFIG_OLDMASK
-#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
-#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
-#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-#else
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-#endif /* CONFIG_OLDMASK */
-
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
-
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
-
-
-/* Definition offset address for CS2-7  -- old mask 5307 */
-
-#define	MCF5307_CS2		(0x400000)
-#define	MCF5307_CS3		(0x600000)
-#define	MCF5307_CS4		(0x800000)
-#define	MCF5307_CS5		(0xA00000)
-#define	MCF5307_CS6		(0xC00000)
-#define	MCF5307_CS7		(0xE00000)
-
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-#if defined(CONFIG_M5307)
-#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
-#endif
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
-                                                /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
-                                                /* Clear to select par I/O */
-
-/*
- *       Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
-
-
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_EC			(1<<31)
-#define	CACR_ESB		(1<<29)
-#define	CACR_DPI		(1<<28)
-#define	CACR_HLCK		(1<<27)
-#define	CACR_CINVA		(1<<24)
-#define	CACR_DNFB		(1<<10)
-#define	CACR_DCM_WTHRU		(0<<8)
-#define	CACR_DCM_WBACK		(1<<8)
-#define	CACR_DCM_OFF_PRE	(2<<8)
-#define	CACR_DCM_OFF_IMP	(3<<8)
-#define	CACR_DW			(1<<5)
-
-#define	ACR_BASE_POS		24
-#define	ACR_MASK_POS		16
-#define	ACR_ENABLE		(1<<15)
-#define	ACR_USER		(0<<13)
-#define	ACR_SUPER		(1<<13)
-#define	ACR_ANY			(2<<13)
-#define	ACR_CM_WTHRU		(0<<5)
-#define	ACR_CM_WBACK		(1<<5)
-#define	ACR_CM_OFF_PRE		(2<<5)
-#define	ACR_CM_OFF_IMP		(3<<5)
-#define	ACR_WPROTECT		(1<<2)
-
-/****************************************************************************/
-#endif	/* m5307sim_h */
diff --git a/include/asm-m68knommu/m532xsim.h b/include/asm-m68knommu/m532xsim.h
deleted file mode 100644
index 1835fd20a82c..000000000000
--- a/include/asm-m68knommu/m532xsim.h
+++ /dev/null
@@ -1,2238 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m532xsim.h -- ColdFire 5329 registers
- */
-
-/****************************************************************************/
-#ifndef	m532xsim_h
-#define	m532xsim_h
-/****************************************************************************/
-
-#define MCF_REG32(x) (*(volatile unsigned long  *)(x))
-#define MCF_REG16(x) (*(volatile unsigned short *)(x))
-#define MCF_REG08(x) (*(volatile unsigned char  *)(x))
-
-#define MCFINT_VECBASE      64
-#define MCFINT_UART0        26          /* Interrupt number for UART0 */
-#define MCFINT_UART1        27          /* Interrupt number for UART1 */
-
-#define MCF_WTM_WCR	MCF_REG16(0xFC098000)
-
-/*
- *	Define the 532x SIM register set addresses.
- */
-#define	MCFSIM_IPRL		0xFC048004
-#define	MCFSIM_IPRH		0xFC048000
-#define	MCFSIM_IPR		MCFSIM_IPRL
-#define	MCFSIM_IMRL		0xFC04800C
-#define	MCFSIM_IMRH		0xFC048008
-#define	MCFSIM_IMR		MCFSIM_IMRL
-#define	MCFSIM_ICR0		0xFC048040	
-#define	MCFSIM_ICR1		0xFC048041	
-#define	MCFSIM_ICR2		0xFC048042	
-#define	MCFSIM_ICR3		0xFC048043	
-#define	MCFSIM_ICR4		0xFC048044	
-#define	MCFSIM_ICR5		0xFC048045	
-#define	MCFSIM_ICR6		0xFC048046	
-#define	MCFSIM_ICR7		0xFC048047	
-#define	MCFSIM_ICR8		0xFC048048	
-#define	MCFSIM_ICR9		0xFC048049	
-#define	MCFSIM_ICR10		0xFC04804A
-#define	MCFSIM_ICR11		0xFC04804B
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-
-#define	MCFSIM_IMR_MASKALL	0xFFFFFFFF	/* All SIM intr sources */
-
-#define MCFSIM_IMR_SIMR0	0xFC04801C
-#define MCFSIM_IMR_SIMR1	0xFC04C01C
-#define MCFSIM_IMR_CIMR0	0xFC04801D
-#define MCFSIM_IMR_CIMR1	0xFC04C01D
-
-#define MCFSIM_ICR_TIMER1	(0xFC048040+32)
-#define MCFSIM_ICR_TIMER2	(0xFC048040+33)
-
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-#define	mcf_getiprl()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
-
-#define	mcf_getiprh()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
-
-
-#define mcf_enable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
-
-#define mcf_enable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
-
-#define mcf_disable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
-
-#define mcf_disable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
-
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_EC			(1<<31)
-#define	CACR_ESB		(1<<29)
-#define	CACR_DPI		(1<<28)
-#define	CACR_HLCK		(1<<27)
-#define	CACR_CINVA		(1<<24)
-#define	CACR_DNFB		(1<<10)
-#define	CACR_DCM_WTHRU		(0<<8)
-#define	CACR_DCM_WBACK		(1<<8)
-#define	CACR_DCM_OFF_PRE	(2<<8)
-#define	CACR_DCM_OFF_IMP	(3<<8)
-#define	CACR_DW			(1<<5)
-
-#define	ACR_BASE_POS		24
-#define	ACR_MASK_POS		16
-#define	ACR_ENABLE		(1<<15)
-#define	ACR_USER		(0<<13)
-#define	ACR_SUPER		(1<<13)
-#define	ACR_ANY			(2<<13)
-#define	ACR_CM_WTHRU		(0<<5)
-#define	ACR_CM_WBACK		(1<<5)
-#define	ACR_CM_OFF_PRE		(2<<5)
-#define	ACR_CM_OFF_IMP		(3<<5)
-#define	ACR_WPROTECT		(1<<2)
-
-/*********************************************************************
- *
- * Inter-IC (I2C) Module
- *
- *********************************************************************/
-
-/* Read/Write access macros for general use */
-#define MCF532x_I2C_I2ADR       (volatile u8 *) (0xFC058000) // Address 
-#define MCF532x_I2C_I2FDR       (volatile u8 *) (0xFC058004) // Freq Divider
-#define MCF532x_I2C_I2CR        (volatile u8 *) (0xFC058008) // Control
-#define MCF532x_I2C_I2SR        (volatile u8 *) (0xFC05800C) // Status
-#define MCF532x_I2C_I2DR        (volatile u8 *) (0xFC058010) // Data I/O
-
-/* Bit level definitions and macros */
-#define MCF532x_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
-
-#define MCF532x_I2C_I2FDR_IC(x)                         (((x)&0x3F))
-
-#define MCF532x_I2C_I2CR_IEN    (0x80)	// I2C enable
-#define MCF532x_I2C_I2CR_IIEN   (0x40)  // interrupt enable
-#define MCF532x_I2C_I2CR_MSTA   (0x20)  // master/slave mode
-#define MCF532x_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
-#define MCF532x_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
-#define MCF532x_I2C_I2CR_RSTA   (0x04)  // repeat start
-
-#define MCF532x_I2C_I2SR_ICF    (0x80)  // data transfer bit
-#define MCF532x_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
-#define MCF532x_I2C_I2SR_IBB    (0x20)  // I2C bus busy
-#define MCF532x_I2C_I2SR_IAL    (0x10)  // aribitration lost
-#define MCF532x_I2C_I2SR_SRW    (0x04)  // slave read/write
-#define MCF532x_I2C_I2SR_IIF    (0x02)  // I2C interrupt
-#define MCF532x_I2C_I2SR_RXAK   (0x01)  // received acknowledge
-
-#define MCF532x_PAR_FECI2C	(volatile u8 *) (0xFC0A4053)
-
-
-/*
- *	The M5329EVB board needs a help getting its devices initialized 
- *	at kernel start time if dBUG doesn't set it up (for example 
- *	it is not used), so we need to do it manually.
- */
-#ifdef __ASSEMBLER__
-.macro m5329EVB_setup
-	movel	#0xFC098000, %a7
-	movel	#0x0, (%a7)
-#define CORE_SRAM	0x80000000	
-#define CORE_SRAM_SIZE	0x8000
-	movel	#CORE_SRAM, %d0
-	addl	#0x221, %d0
-	movec	%d0,%RAMBAR1
-	movel	#CORE_SRAM, %sp
-	addl	#CORE_SRAM_SIZE, %sp
-	jsr	sysinit
-.endm
-#define	PLATFORM_SETUP	m5329EVB_setup
-
-#endif /* __ASSEMBLER__ */
-
-/*********************************************************************
- *
- * Chip Configuration Module (CCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_CCM_CCR               MCF_REG16(0xFC0A0004)
-#define MCF_CCM_RCON              MCF_REG16(0xFC0A0008)
-#define MCF_CCM_CIR               MCF_REG16(0xFC0A000A)
-#define MCF_CCM_MISCCR            MCF_REG16(0xFC0A0010)
-#define MCF_CCM_CDR               MCF_REG16(0xFC0A0012)
-#define MCF_CCM_UHCSR             MCF_REG16(0xFC0A0014)
-#define MCF_CCM_UOCSR             MCF_REG16(0xFC0A0016)
-
-/* Bit definitions and macros for MCF_CCM_CCR */
-#define MCF_CCM_CCR_RESERVED      (0x0001)
-#define MCF_CCM_CCR_PLL_MODE      (0x0003)
-#define MCF_CCM_CCR_OSC_MODE      (0x0005)
-#define MCF_CCM_CCR_BOOTPS(x)     (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_CCR_LOAD          (0x0021)
-#define MCF_CCM_CCR_LIMP          (0x0041)
-#define MCF_CCM_CCR_CSC(x)        (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_RCON */
-#define MCF_CCM_RCON_RESERVED     (0x0001)
-#define MCF_CCM_RCON_PLL_MODE     (0x0003)
-#define MCF_CCM_RCON_OSC_MODE     (0x0005)
-#define MCF_CCM_RCON_BOOTPS(x)    (((x)&0x0003)<<3|0x0001)
-#define MCF_CCM_RCON_LOAD         (0x0021)
-#define MCF_CCM_RCON_LIMP         (0x0041)
-#define MCF_CCM_RCON_CSC(x)       (((x)&0x0003)<<8|0x0001)
-
-/* Bit definitions and macros for MCF_CCM_CIR */
-#define MCF_CCM_CIR_PRN(x)        (((x)&0x003F)<<0)
-#define MCF_CCM_CIR_PIN(x)        (((x)&0x03FF)<<6)
-
-/* Bit definitions and macros for MCF_CCM_MISCCR */
-#define MCF_CCM_MISCCR_USBSRC     (0x0001)
-#define MCF_CCM_MISCCR_USBDIV     (0x0002)
-#define MCF_CCM_MISCCR_SSI_SRC    (0x0010)
-#define MCF_CCM_MISCCR_TIM_DMA   (0x0020)
-#define MCF_CCM_MISCCR_SSI_PUS    (0x0040)
-#define MCF_CCM_MISCCR_SSI_PUE    (0x0080)
-#define MCF_CCM_MISCCR_LCD_CHEN   (0x0100)
-#define MCF_CCM_MISCCR_LIMP       (0x1000)
-#define MCF_CCM_MISCCR_PLL_LOCK   (0x2000)
-
-/* Bit definitions and macros for MCF_CCM_CDR */
-#define MCF_CCM_CDR_SSIDIV(x)     (((x)&0x000F)<<0)
-#define MCF_CCM_CDR_LPDIV(x)      (((x)&0x000F)<<8)
-
-/* Bit definitions and macros for MCF_CCM_UHCSR */
-#define MCF_CCM_UHCSR_XPDE        (0x0001)
-#define MCF_CCM_UHCSR_UHMIE       (0x0002)
-#define MCF_CCM_UHCSR_WKUP        (0x0004)
-#define MCF_CCM_UHCSR_PORTIND(x)  (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_CCM_UOCSR */
-#define MCF_CCM_UOCSR_XPDE        (0x0001)
-#define MCF_CCM_UOCSR_UOMIE       (0x0002)
-#define MCF_CCM_UOCSR_WKUP        (0x0004)
-#define MCF_CCM_UOCSR_PWRFLT      (0x0008)
-#define MCF_CCM_UOCSR_SEND        (0x0010)
-#define MCF_CCM_UOCSR_VVLD        (0x0020)
-#define MCF_CCM_UOCSR_BVLD        (0x0040)
-#define MCF_CCM_UOCSR_AVLD        (0x0080)
-#define MCF_CCM_UOCSR_DPPU        (0x0100)
-#define MCF_CCM_UOCSR_DCR_VBUS    (0x0200)
-#define MCF_CCM_UOCSR_CRG_VBUS    (0x0400)
-#define MCF_CCM_UOCSR_DRV_VBUS    (0x0800)
-#define MCF_CCM_UOCSR_DMPD        (0x1000)
-#define MCF_CCM_UOCSR_DPPD        (0x2000)
-#define MCF_CCM_UOCSR_PORTIND(x)  (((x)&0x0003)<<14)
-
-/*********************************************************************
- *
- * DMA Timers (DTIM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_DTIM0_DTMR           MCF_REG16(0xFC070000)
-#define MCF_DTIM0_DTXMR          MCF_REG08(0xFC070002)
-#define MCF_DTIM0_DTER           MCF_REG08(0xFC070003)
-#define MCF_DTIM0_DTRR           MCF_REG32(0xFC070004)
-#define MCF_DTIM0_DTCR           MCF_REG32(0xFC070008)
-#define MCF_DTIM0_DTCN           MCF_REG32(0xFC07000C)
-#define MCF_DTIM1_DTMR           MCF_REG16(0xFC074000)
-#define MCF_DTIM1_DTXMR          MCF_REG08(0xFC074002)
-#define MCF_DTIM1_DTER           MCF_REG08(0xFC074003)
-#define MCF_DTIM1_DTRR           MCF_REG32(0xFC074004)
-#define MCF_DTIM1_DTCR           MCF_REG32(0xFC074008)
-#define MCF_DTIM1_DTCN           MCF_REG32(0xFC07400C)
-#define MCF_DTIM2_DTMR           MCF_REG16(0xFC078000)
-#define MCF_DTIM2_DTXMR          MCF_REG08(0xFC078002)
-#define MCF_DTIM2_DTER           MCF_REG08(0xFC078003)
-#define MCF_DTIM2_DTRR           MCF_REG32(0xFC078004)
-#define MCF_DTIM2_DTCR           MCF_REG32(0xFC078008)
-#define MCF_DTIM2_DTCN           MCF_REG32(0xFC07800C)
-#define MCF_DTIM3_DTMR           MCF_REG16(0xFC07C000)
-#define MCF_DTIM3_DTXMR          MCF_REG08(0xFC07C002)
-#define MCF_DTIM3_DTER           MCF_REG08(0xFC07C003)
-#define MCF_DTIM3_DTRR           MCF_REG32(0xFC07C004)
-#define MCF_DTIM3_DTCR           MCF_REG32(0xFC07C008)
-#define MCF_DTIM3_DTCN           MCF_REG32(0xFC07C00C)
-#define MCF_DTIM_DTMR(x)         MCF_REG16(0xFC070000+((x)*0x4000))
-#define MCF_DTIM_DTXMR(x)        MCF_REG08(0xFC070002+((x)*0x4000))
-#define MCF_DTIM_DTER(x)         MCF_REG08(0xFC070003+((x)*0x4000))
-#define MCF_DTIM_DTRR(x)         MCF_REG32(0xFC070004+((x)*0x4000))
-#define MCF_DTIM_DTCR(x)         MCF_REG32(0xFC070008+((x)*0x4000))
-#define MCF_DTIM_DTCN(x)         MCF_REG32(0xFC07000C+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_DTIM_DTMR */
-#define MCF_DTIM_DTMR_RST        (0x0001)
-#define MCF_DTIM_DTMR_CLK(x)     (((x)&0x0003)<<1)
-#define MCF_DTIM_DTMR_FRR        (0x0008)
-#define MCF_DTIM_DTMR_ORRI       (0x0010)
-#define MCF_DTIM_DTMR_OM         (0x0020)
-#define MCF_DTIM_DTMR_CE(x)      (((x)&0x0003)<<6)
-#define MCF_DTIM_DTMR_PS(x)      (((x)&0x00FF)<<8)
-#define MCF_DTIM_DTMR_CE_ANY     (0x00C0)
-#define MCF_DTIM_DTMR_CE_FALL    (0x0080)
-#define MCF_DTIM_DTMR_CE_RISE    (0x0040)
-#define MCF_DTIM_DTMR_CE_NONE    (0x0000)
-#define MCF_DTIM_DTMR_CLK_DTIN   (0x0006)
-#define MCF_DTIM_DTMR_CLK_DIV16  (0x0004)
-#define MCF_DTIM_DTMR_CLK_DIV1   (0x0002)
-#define MCF_DTIM_DTMR_CLK_STOP   (0x0000)
-
-/* Bit definitions and macros for MCF_DTIM_DTXMR */
-#define MCF_DTIM_DTXMR_MODE16    (0x01)
-#define MCF_DTIM_DTXMR_DMAEN     (0x80)
-
-/* Bit definitions and macros for MCF_DTIM_DTER */
-#define MCF_DTIM_DTER_CAP        (0x01)
-#define MCF_DTIM_DTER_REF        (0x02)
-
-/* Bit definitions and macros for MCF_DTIM_DTRR */
-#define MCF_DTIM_DTRR_REF(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCR */
-#define MCF_DTIM_DTCR_CAP(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_DTIM_DTCN */
-#define MCF_DTIM_DTCN_CNT(x)     (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * FlexBus Chip Selects (FBCS)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_FBCS0_CSAR		MCF_REG32(0xFC008000)
-#define MCF_FBCS0_CSMR		MCF_REG32(0xFC008004)
-#define MCF_FBCS0_CSCR		MCF_REG32(0xFC008008)
-#define MCF_FBCS1_CSAR		MCF_REG32(0xFC00800C)
-#define MCF_FBCS1_CSMR		MCF_REG32(0xFC008010)
-#define MCF_FBCS1_CSCR		MCF_REG32(0xFC008014)
-#define MCF_FBCS2_CSAR		MCF_REG32(0xFC008018)
-#define MCF_FBCS2_CSMR		MCF_REG32(0xFC00801C)
-#define MCF_FBCS2_CSCR		MCF_REG32(0xFC008020)
-#define MCF_FBCS3_CSAR		MCF_REG32(0xFC008024)
-#define MCF_FBCS3_CSMR		MCF_REG32(0xFC008028)
-#define MCF_FBCS3_CSCR		MCF_REG32(0xFC00802C)
-#define MCF_FBCS4_CSAR		MCF_REG32(0xFC008030)
-#define MCF_FBCS4_CSMR		MCF_REG32(0xFC008034)
-#define MCF_FBCS4_CSCR		MCF_REG32(0xFC008038)
-#define MCF_FBCS5_CSAR		MCF_REG32(0xFC00803C)
-#define MCF_FBCS5_CSMR		MCF_REG32(0xFC008040)
-#define MCF_FBCS5_CSCR		MCF_REG32(0xFC008044)
-#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))
-#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))
-#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))
-
-/* Bit definitions and macros for MCF_FBCS_CSAR */
-#define MCF_FBCS_CSAR_BA(x)	((x)&0xFFFF0000)
-
-/* Bit definitions and macros for MCF_FBCS_CSMR */
-#define MCF_FBCS_CSMR_V		(0x00000001)
-#define MCF_FBCS_CSMR_WP	(0x00000100)
-#define MCF_FBCS_CSMR_BAM(x)	(((x)&0x0000FFFF)<<16)
-#define MCF_FBCS_CSMR_BAM_4G	(0xFFFF0000)
-#define MCF_FBCS_CSMR_BAM_2G	(0x7FFF0000)
-#define MCF_FBCS_CSMR_BAM_1G	(0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_1024M	(0x3FFF0000)
-#define MCF_FBCS_CSMR_BAM_512M	(0x1FFF0000)
-#define MCF_FBCS_CSMR_BAM_256M	(0x0FFF0000)
-#define MCF_FBCS_CSMR_BAM_128M	(0x07FF0000)
-#define MCF_FBCS_CSMR_BAM_64M	(0x03FF0000)
-#define MCF_FBCS_CSMR_BAM_32M	(0x01FF0000)
-#define MCF_FBCS_CSMR_BAM_16M	(0x00FF0000)
-#define MCF_FBCS_CSMR_BAM_8M	(0x007F0000)
-#define MCF_FBCS_CSMR_BAM_4M	(0x003F0000)
-#define MCF_FBCS_CSMR_BAM_2M	(0x001F0000)
-#define MCF_FBCS_CSMR_BAM_1M	(0x000F0000)
-#define MCF_FBCS_CSMR_BAM_1024K	(0x000F0000)
-#define MCF_FBCS_CSMR_BAM_512K	(0x00070000)
-#define MCF_FBCS_CSMR_BAM_256K	(0x00030000)
-#define MCF_FBCS_CSMR_BAM_128K	(0x00010000)
-#define MCF_FBCS_CSMR_BAM_64K	(0x00000000)
-
-/* Bit definitions and macros for MCF_FBCS_CSCR */
-#define MCF_FBCS_CSCR_BSTW	(0x00000008)
-#define MCF_FBCS_CSCR_BSTR	(0x00000010)
-#define MCF_FBCS_CSCR_BEM	(0x00000020)
-#define MCF_FBCS_CSCR_PS(x)	(((x)&0x00000003)<<6)
-#define MCF_FBCS_CSCR_AA	(0x00000100)
-#define MCF_FBCS_CSCR_SBM	(0x00000200)
-#define MCF_FBCS_CSCR_WS(x)	(((x)&0x0000003F)<<10)
-#define MCF_FBCS_CSCR_WRAH(x)	(((x)&0x00000003)<<16)
-#define MCF_FBCS_CSCR_RDAH(x)	(((x)&0x00000003)<<18)
-#define MCF_FBCS_CSCR_ASET(x)	(((x)&0x00000003)<<20)
-#define MCF_FBCS_CSCR_SWSEN	(0x00800000)
-#define MCF_FBCS_CSCR_SWS(x)	(((x)&0x0000003F)<<26)
-#define MCF_FBCS_CSCR_PS_8	(0x0040)
-#define MCF_FBCS_CSCR_PS_16	(0x0080)
-#define MCF_FBCS_CSCR_PS_32	(0x0000)
-
-/*********************************************************************
- *
- * General Purpose I/O (GPIO)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_GPIO_PODR_FECH		MCF_REG08(0xFC0A4000)
-#define MCF_GPIO_PODR_FECL		MCF_REG08(0xFC0A4001)
-#define MCF_GPIO_PODR_SSI		MCF_REG08(0xFC0A4002)
-#define MCF_GPIO_PODR_BUSCTL		MCF_REG08(0xFC0A4003)
-#define MCF_GPIO_PODR_BE		MCF_REG08(0xFC0A4004)
-#define MCF_GPIO_PODR_CS		MCF_REG08(0xFC0A4005)
-#define MCF_GPIO_PODR_PWM		MCF_REG08(0xFC0A4006)
-#define MCF_GPIO_PODR_FECI2C		MCF_REG08(0xFC0A4007)
-#define MCF_GPIO_PODR_UART		MCF_REG08(0xFC0A4009)
-#define MCF_GPIO_PODR_QSPI		MCF_REG08(0xFC0A400A)
-#define MCF_GPIO_PODR_TIMER		MCF_REG08(0xFC0A400B)
-#define MCF_GPIO_PODR_LCDDATAH		MCF_REG08(0xFC0A400D)
-#define MCF_GPIO_PODR_LCDDATAM		MCF_REG08(0xFC0A400E)
-#define MCF_GPIO_PODR_LCDDATAL		MCF_REG08(0xFC0A400F)
-#define MCF_GPIO_PODR_LCDCTLH		MCF_REG08(0xFC0A4010)
-#define MCF_GPIO_PODR_LCDCTLL		MCF_REG08(0xFC0A4011)
-#define MCF_GPIO_PDDR_FECH		MCF_REG08(0xFC0A4014)
-#define MCF_GPIO_PDDR_FECL		MCF_REG08(0xFC0A4015)
-#define MCF_GPIO_PDDR_SSI		MCF_REG08(0xFC0A4016)
-#define MCF_GPIO_PDDR_BUSCTL		MCF_REG08(0xFC0A4017)
-#define MCF_GPIO_PDDR_BE		MCF_REG08(0xFC0A4018)
-#define MCF_GPIO_PDDR_CS		MCF_REG08(0xFC0A4019)
-#define MCF_GPIO_PDDR_PWM		MCF_REG08(0xFC0A401A)
-#define MCF_GPIO_PDDR_FECI2C		MCF_REG08(0xFC0A401B)
-#define MCF_GPIO_PDDR_UART		MCF_REG08(0xFC0A401C)
-#define MCF_GPIO_PDDR_QSPI		MCF_REG08(0xFC0A401E)
-#define MCF_GPIO_PDDR_TIMER		MCF_REG08(0xFC0A401F)
-#define MCF_GPIO_PDDR_LCDDATAH		MCF_REG08(0xFC0A4021)
-#define MCF_GPIO_PDDR_LCDDATAM		MCF_REG08(0xFC0A4022)
-#define MCF_GPIO_PDDR_LCDDATAL		MCF_REG08(0xFC0A4023)
-#define MCF_GPIO_PDDR_LCDCTLH		MCF_REG08(0xFC0A4024)
-#define MCF_GPIO_PDDR_LCDCTLL		MCF_REG08(0xFC0A4025)
-#define MCF_GPIO_PPDSDR_FECH		MCF_REG08(0xFC0A4028)
-#define MCF_GPIO_PPDSDR_FECL		MCF_REG08(0xFC0A4029)
-#define MCF_GPIO_PPDSDR_SSI		MCF_REG08(0xFC0A402A)
-#define MCF_GPIO_PPDSDR_BUSCTL		MCF_REG08(0xFC0A402B)
-#define MCF_GPIO_PPDSDR_BE		MCF_REG08(0xFC0A402C)
-#define MCF_GPIO_PPDSDR_CS		MCF_REG08(0xFC0A402D)
-#define MCF_GPIO_PPDSDR_PWM		MCF_REG08(0xFC0A402E)
-#define MCF_GPIO_PPDSDR_FECI2C		MCF_REG08(0xFC0A402F)
-#define MCF_GPIO_PPDSDR_UART		MCF_REG08(0xFC0A4031)
-#define MCF_GPIO_PPDSDR_QSPI		MCF_REG08(0xFC0A4032)
-#define MCF_GPIO_PPDSDR_TIMER		MCF_REG08(0xFC0A4033)
-#define MCF_GPIO_PPDSDR_LCDDATAH	MCF_REG08(0xFC0A4035)
-#define MCF_GPIO_PPDSDR_LCDDATAM	MCF_REG08(0xFC0A4036)
-#define MCF_GPIO_PPDSDR_LCDDATAL	MCF_REG08(0xFC0A4037)
-#define MCF_GPIO_PPDSDR_LCDCTLH		MCF_REG08(0xFC0A4038)
-#define MCF_GPIO_PPDSDR_LCDCTLL		MCF_REG08(0xFC0A4039)
-#define MCF_GPIO_PCLRR_FECH		MCF_REG08(0xFC0A403C)
-#define MCF_GPIO_PCLRR_FECL		MCF_REG08(0xFC0A403D)
-#define MCF_GPIO_PCLRR_SSI		MCF_REG08(0xFC0A403E)
-#define MCF_GPIO_PCLRR_BUSCTL		MCF_REG08(0xFC0A403F)
-#define MCF_GPIO_PCLRR_BE		MCF_REG08(0xFC0A4040)
-#define MCF_GPIO_PCLRR_CS		MCF_REG08(0xFC0A4041)
-#define MCF_GPIO_PCLRR_PWM		MCF_REG08(0xFC0A4042)
-#define MCF_GPIO_PCLRR_FECI2C		MCF_REG08(0xFC0A4043)
-#define MCF_GPIO_PCLRR_UART		MCF_REG08(0xFC0A4045)
-#define MCF_GPIO_PCLRR_QSPI		MCF_REG08(0xFC0A4046)
-#define MCF_GPIO_PCLRR_TIMER		MCF_REG08(0xFC0A4047)
-#define MCF_GPIO_PCLRR_LCDDATAH		MCF_REG08(0xFC0A4049)
-#define MCF_GPIO_PCLRR_LCDDATAM		MCF_REG08(0xFC0A404A)
-#define MCF_GPIO_PCLRR_LCDDATAL		MCF_REG08(0xFC0A404B)
-#define MCF_GPIO_PCLRR_LCDCTLH		MCF_REG08(0xFC0A404C)
-#define MCF_GPIO_PCLRR_LCDCTLL		MCF_REG08(0xFC0A404D)
-#define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
-#define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
-#define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
-#define MCF_GPIO_PAR_FECI2C		MCF_REG08(0xFC0A4053)
-#define MCF_GPIO_PAR_BE			MCF_REG08(0xFC0A4054)
-#define MCF_GPIO_PAR_CS			MCF_REG08(0xFC0A4055)
-#define MCF_GPIO_PAR_SSI		MCF_REG16(0xFC0A4056)
-#define MCF_GPIO_PAR_UART		MCF_REG16(0xFC0A4058)
-#define MCF_GPIO_PAR_QSPI		MCF_REG16(0xFC0A405A)
-#define MCF_GPIO_PAR_TIMER		MCF_REG08(0xFC0A405C)
-#define MCF_GPIO_PAR_LCDDATA		MCF_REG08(0xFC0A405D)
-#define MCF_GPIO_PAR_LCDCTL		MCF_REG16(0xFC0A405E)
-#define MCF_GPIO_PAR_IRQ		MCF_REG16(0xFC0A4060)
-#define MCF_GPIO_MSCR_FLEXBUS		MCF_REG08(0xFC0A4064)
-#define MCF_GPIO_MSCR_SDRAM		MCF_REG08(0xFC0A4065)
-#define MCF_GPIO_DSCR_I2C		MCF_REG08(0xFC0A4068)
-#define MCF_GPIO_DSCR_PWM		MCF_REG08(0xFC0A4069)
-#define MCF_GPIO_DSCR_FEC		MCF_REG08(0xFC0A406A)
-#define MCF_GPIO_DSCR_UART		MCF_REG08(0xFC0A406B)
-#define MCF_GPIO_DSCR_QSPI		MCF_REG08(0xFC0A406C)
-#define MCF_GPIO_DSCR_TIMER		MCF_REG08(0xFC0A406D)
-#define MCF_GPIO_DSCR_SSI		MCF_REG08(0xFC0A406E)
-#define MCF_GPIO_DSCR_LCD		MCF_REG08(0xFC0A406F)
-#define MCF_GPIO_DSCR_DEBUG		MCF_REG08(0xFC0A4070)
-#define MCF_GPIO_DSCR_CLKRST		MCF_REG08(0xFC0A4071)
-#define MCF_GPIO_DSCR_IRQ		MCF_REG08(0xFC0A4072)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
-#define MCF_GPIO_PODR_FECH_PODR_FECH0              (0x01)
-#define MCF_GPIO_PODR_FECH_PODR_FECH1              (0x02)
-#define MCF_GPIO_PODR_FECH_PODR_FECH2              (0x04)
-#define MCF_GPIO_PODR_FECH_PODR_FECH3              (0x08)
-#define MCF_GPIO_PODR_FECH_PODR_FECH4              (0x10)
-#define MCF_GPIO_PODR_FECH_PODR_FECH5              (0x20)
-#define MCF_GPIO_PODR_FECH_PODR_FECH6              (0x40)
-#define MCF_GPIO_PODR_FECH_PODR_FECH7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
-#define MCF_GPIO_PODR_FECL_PODR_FECL0              (0x01)
-#define MCF_GPIO_PODR_FECL_PODR_FECL1              (0x02)
-#define MCF_GPIO_PODR_FECL_PODR_FECL2              (0x04)
-#define MCF_GPIO_PODR_FECL_PODR_FECL3              (0x08)
-#define MCF_GPIO_PODR_FECL_PODR_FECL4              (0x10)
-#define MCF_GPIO_PODR_FECL_PODR_FECL5              (0x20)
-#define MCF_GPIO_PODR_FECL_PODR_FECL6              (0x40)
-#define MCF_GPIO_PODR_FECL_PODR_FECL7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
-#define MCF_GPIO_PODR_SSI_PODR_SSI0                (0x01)
-#define MCF_GPIO_PODR_SSI_PODR_SSI1                (0x02)
-#define MCF_GPIO_PODR_SSI_PODR_SSI2                (0x04)
-#define MCF_GPIO_PODR_SSI_PODR_SSI3                (0x08)
-#define MCF_GPIO_PODR_SSI_PODR_SSI4                (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
-#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0         (0x01)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1          (0x02)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2          (0x04)
-#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_BE */
-#define MCF_GPIO_PODR_BE_PODR_BE0                  (0x01)
-#define MCF_GPIO_PODR_BE_PODR_BE1                  (0x02)
-#define MCF_GPIO_PODR_BE_PODR_BE2                  (0x04)
-#define MCF_GPIO_PODR_BE_PODR_BE3                  (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_CS */
-#define MCF_GPIO_PODR_CS_PODR_CS1                  (0x02)
-#define MCF_GPIO_PODR_CS_PODR_CS2                  (0x04)
-#define MCF_GPIO_PODR_CS_PODR_CS3                  (0x08)
-#define MCF_GPIO_PODR_CS_PODR_CS4                  (0x10)
-#define MCF_GPIO_PODR_CS_PODR_CS5                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
-#define MCF_GPIO_PODR_PWM_PODR_PWM2                (0x04)
-#define MCF_GPIO_PODR_PWM_PODR_PWM3                (0x08)
-#define MCF_GPIO_PODR_PWM_PODR_PWM4                (0x10)
-#define MCF_GPIO_PODR_PWM_PODR_PWM5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0          (0x01)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1          (0x02)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2          (0x04)
-#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_UART */
-#define MCF_GPIO_PODR_UART_PODR_UART0              (0x01)
-#define MCF_GPIO_PODR_UART_PODR_UART1              (0x02)
-#define MCF_GPIO_PODR_UART_PODR_UART2              (0x04)
-#define MCF_GPIO_PODR_UART_PODR_UART3              (0x08)
-#define MCF_GPIO_PODR_UART_PODR_UART4              (0x10)
-#define MCF_GPIO_PODR_UART_PODR_UART5              (0x20)
-#define MCF_GPIO_PODR_UART_PODR_UART6              (0x40)
-#define MCF_GPIO_PODR_UART_PODR_UART7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI0              (0x01)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI1              (0x02)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI2              (0x04)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI3              (0x08)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI4              (0x10)
-#define MCF_GPIO_PODR_QSPI_PODR_QSPI5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER0            (0x01)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER1            (0x02)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER2            (0x04)
-#define MCF_GPIO_PODR_TIMER_PODR_TIMER3            (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1      (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1      (0x02)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2      (0x04)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3      (0x08)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4      (0x10)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5      (0x20)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6      (0x40)
-#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0      (0x01)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1      (0x02)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2      (0x04)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3      (0x08)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4      (0x10)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5      (0x20)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6      (0x40)
-#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
-#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0        (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0        (0x01)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1        (0x02)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2        (0x04)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3        (0x08)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4        (0x10)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5        (0x20)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6        (0x40)
-#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7        (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH0              (0x01)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH1              (0x02)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH2              (0x04)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH3              (0x08)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH4              (0x10)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH5              (0x20)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH6              (0x40)
-#define MCF_GPIO_PDDR_FECH_PDDR_FECH7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL0              (0x01)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL1              (0x02)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL2              (0x04)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL3              (0x08)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL4              (0x10)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL5              (0x20)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL6              (0x40)
-#define MCF_GPIO_PDDR_FECL_PDDR_FECL7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI0                (0x01)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI1                (0x02)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI2                (0x04)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI3                (0x08)
-#define MCF_GPIO_PDDR_SSI_PDDR_SSI4                (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
-#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0         (0x01)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1          (0x02)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2          (0x04)
-#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
-#define MCF_GPIO_PDDR_BE_PDDR_BE0                  (0x01)
-#define MCF_GPIO_PDDR_BE_PDDR_BE1                  (0x02)
-#define MCF_GPIO_PDDR_BE_PDDR_BE2                  (0x04)
-#define MCF_GPIO_PDDR_BE_PDDR_BE3                  (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
-#define MCF_GPIO_PDDR_CS_PDDR_CS1                  (0x02)
-#define MCF_GPIO_PDDR_CS_PDDR_CS2                  (0x04)
-#define MCF_GPIO_PDDR_CS_PDDR_CS3                  (0x08)
-#define MCF_GPIO_PDDR_CS_PDDR_CS4                  (0x10)
-#define MCF_GPIO_PDDR_CS_PDDR_CS5                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM2                (0x04)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM3                (0x08)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM4                (0x10)
-#define MCF_GPIO_PDDR_PWM_PDDR_PWM5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0          (0x01)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1          (0x02)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2          (0x04)
-#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
-#define MCF_GPIO_PDDR_UART_PDDR_UART0              (0x01)
-#define MCF_GPIO_PDDR_UART_PDDR_UART1              (0x02)
-#define MCF_GPIO_PDDR_UART_PDDR_UART2              (0x04)
-#define MCF_GPIO_PDDR_UART_PDDR_UART3              (0x08)
-#define MCF_GPIO_PDDR_UART_PDDR_UART4              (0x10)
-#define MCF_GPIO_PDDR_UART_PDDR_UART5              (0x20)
-#define MCF_GPIO_PDDR_UART_PDDR_UART6              (0x40)
-#define MCF_GPIO_PDDR_UART_PDDR_UART7              (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0              (0x01)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1              (0x02)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2              (0x04)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3              (0x08)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4              (0x10)
-#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0            (0x01)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1            (0x02)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2            (0x04)
-#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3            (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1      (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1      (0x02)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2      (0x04)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3      (0x08)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4      (0x10)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5      (0x20)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6      (0x40)
-#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0      (0x01)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1      (0x02)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2      (0x04)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3      (0x08)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4      (0x10)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5      (0x20)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6      (0x40)
-#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
-#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0        (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0        (0x01)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1        (0x02)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2        (0x04)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3        (0x08)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4        (0x10)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5        (0x20)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6        (0x40)
-#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7        (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0          (0x01)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1          (0x02)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2          (0x04)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3          (0x08)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4          (0x10)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5          (0x20)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6          (0x40)
-#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0          (0x01)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1          (0x02)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2          (0x04)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3          (0x08)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4          (0x10)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5          (0x20)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6          (0x40)
-#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0            (0x01)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1            (0x02)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2            (0x04)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3            (0x08)
-#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4            (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
-#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0       (0x01)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1      (0x02)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2      (0x04)
-#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3      (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0              (0x01)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1              (0x02)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2              (0x04)
-#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3              (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1              (0x02)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2              (0x04)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3              (0x08)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4              (0x10)
-#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2            (0x04)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3            (0x08)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4            (0x10)
-#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5            (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0      (0x01)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1      (0x02)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2      (0x04)
-#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3      (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0          (0x01)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1          (0x02)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2          (0x04)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3          (0x08)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4          (0x10)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5          (0x20)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6          (0x40)
-#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7          (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0          (0x01)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1          (0x02)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2          (0x04)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3          (0x08)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4          (0x10)
-#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5          (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0        (0x01)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1        (0x02)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2        (0x04)
-#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1  (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1  (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2  (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3  (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4  (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5  (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6  (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7  (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0  (0x01)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1  (0x02)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2  (0x04)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3  (0x08)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4  (0x10)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5  (0x20)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6  (0x40)
-#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7  (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
-#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0    (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0    (0x01)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1    (0x02)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2    (0x04)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3    (0x08)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4    (0x10)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5    (0x20)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6    (0x40)
-#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0            (0x01)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1            (0x02)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2            (0x04)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3            (0x08)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4            (0x10)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5            (0x20)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6            (0x40)
-#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0            (0x01)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1            (0x02)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2            (0x04)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3            (0x08)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4            (0x10)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5            (0x20)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6            (0x40)
-#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0              (0x01)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1              (0x02)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2              (0x04)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3              (0x08)
-#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4              (0x10)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
-#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0        (0x01)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1        (0x02)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2        (0x04)
-#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE0                (0x01)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE1                (0x02)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE2                (0x04)
-#define MCF_GPIO_PCLRR_BE_PCLRR_BE3                (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS1                (0x02)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS2                (0x04)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS3                (0x08)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS4                (0x10)
-#define MCF_GPIO_PCLRR_CS_PCLRR_CS5                (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2              (0x04)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3              (0x08)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4              (0x10)
-#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5              (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0        (0x01)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1        (0x02)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2        (0x04)
-#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3        (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART0            (0x01)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART1            (0x02)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART2            (0x04)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART3            (0x08)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART4            (0x10)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART5            (0x20)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART6            (0x40)
-#define MCF_GPIO_PCLRR_UART_PCLRR_UART7            (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0            (0x01)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1            (0x02)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2            (0x04)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3            (0x08)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4            (0x10)
-#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5            (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0          (0x01)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1          (0x02)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2          (0x04)
-#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3          (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1    (0x02)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1    (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2    (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3    (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4    (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5    (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6    (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0    (0x01)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1    (0x02)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2    (0x04)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3    (0x08)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4    (0x10)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5    (0x20)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6    (0x40)
-#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7    (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
-#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0      (0x01)
-
-/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0      (0x01)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1      (0x02)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2      (0x04)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3      (0x08)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4      (0x10)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5      (0x20)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6      (0x40)
-#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7      (0x80)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x)            (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO           (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1          (0x04)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC            (0x0C)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO          (0x00)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART          (0x01)
-#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC           (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
-#define MCF_GPIO_PAR_PWM_PAR_PWM1(x)               (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_PWM_PAR_PWM3(x)               (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_PWM_PAR_PWM5                  (0x10)
-#define MCF_GPIO_PAR_PWM_PAR_PWM7                  (0x20)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x)              (((x)&0x03)<<3)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB                (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA                 (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE                 (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE              (0x80)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA              (0x40)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO           (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB            (0x20)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO            (0x00)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0           (0x10)
-#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS              (0x18)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)             (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x)            (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x)             (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2          (0x40)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL            (0x80)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC           (0xC0)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO          (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2         (0x10)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA           (0x20)
-#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO         (0x30)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2          (0x04)
-#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL            (0x0C)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO           (0x00)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2          (0x02)
-#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA            (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_BE */
-#define MCF_GPIO_PAR_BE_PAR_BE0                    (0x01)
-#define MCF_GPIO_PAR_BE_PAR_BE1                    (0x02)
-#define MCF_GPIO_PAR_BE_PAR_BE2                    (0x04)
-#define MCF_GPIO_PAR_BE_PAR_BE3                    (0x08)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_CS */
-#define MCF_GPIO_PAR_CS_PAR_CS1                    (0x02)
-#define MCF_GPIO_PAR_CS_PAR_CS2                    (0x04)
-#define MCF_GPIO_PAR_CS_PAR_CS3                    (0x08)
-#define MCF_GPIO_PAR_CS_PAR_CS4                    (0x10)
-#define MCF_GPIO_PAR_CS_PAR_CS5                    (0x20)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO            (0x00)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1           (0x01)
-#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1             (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
-#define MCF_GPIO_PAR_SSI_PAR_MCLK                  (0x0080)
-#define MCF_GPIO_PAR_SSI_PAR_TXD(x)                (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_SSI_PAR_RXD(x)                (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_SSI_PAR_FS(x)                 (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_SSI_PAR_BCLK(x)               (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_UART */
-#define MCF_GPIO_PAR_UART_PAR_UTXD0                (0x0001)
-#define MCF_GPIO_PAR_UART_PAR_URXD0                (0x0002)
-#define MCF_GPIO_PAR_UART_PAR_URTS0                (0x0004)
-#define MCF_GPIO_PAR_UART_PAR_UCTS0                (0x0008)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1(x)             (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_UART_PAR_URXD1(x)             (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_UART_PAR_URTS1(x)             (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1(x)             (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK       (0x0800)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7        (0x0400)
-#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1          (0x0C00)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS         (0x0200)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6        (0x0100)
-#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1          (0x0300)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD        (0x0080)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5        (0x0040)
-#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1          (0x00C0)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO           (0x0000)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD        (0x0020)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4        (0x0010)
-#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1          (0x0030)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
-#define MCF_GPIO_PAR_QSPI_PAR_SCK(x)               (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x)              (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_QSPI_PAR_DIN(x)               (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x)              (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x)              (((x)&0x0003)<<12)
-#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x)              (((x)&0x0003)<<14)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x)             (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x)             (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)             (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)             (((x)&0x03)<<6)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3          (0x80)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2          (0x40)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3           (0xC0)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2          (0x20)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2          (0x10)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2           (0x30)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1          (0x08)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1          (0x04)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1           (0x0C)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO           (0x00)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0          (0x02)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0          (0x01)
-#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0           (0x03)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x)          (((x)&0x03)<<0)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x)         (((x)&0x03)<<2)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x)           (((x)&0x03)<<4)
-#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x)           (((x)&0x03)<<6)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
-#define MCF_GPIO_PAR_LCDCTL_PAR_CLS                (0x0001)
-#define MCF_GPIO_PAR_LCDCTL_PAR_PS                 (0x0002)
-#define MCF_GPIO_PAR_LCDCTL_PAR_REV                (0x0004)
-#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR            (0x0008)
-#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST           (0x0010)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK              (0x0020)
-#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC           (0x0040)
-#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC          (0x0080)
-#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE             (0x0100)
-
-/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x)               (((x)&0x0003)<<4)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x)               (((x)&0x0003)<<6)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x)               (((x)&0x0003)<<8)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x)               (((x)&0x0003)<<10)
-#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x)               (((x)&0x0003)<<12)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x)      (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x)       (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x)       (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x)          (((x)&0x03)<<0)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x)          (((x)&0x03)<<2)
-#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x)         (((x)&0x03)<<4)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
-#define MCF_GPIO_DSCR_I2C_I2C_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
-#define MCF_GPIO_DSCR_PWM_PWM_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
-#define MCF_GPIO_DSCR_FEC_FEC_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
-#define MCF_GPIO_DSCR_UART_UART0_DSE(x)            (((x)&0x03)<<0)
-#define MCF_GPIO_DSCR_UART_UART1_DSE(x)            (((x)&0x03)<<2)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
-#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x)             (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
-#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x)           (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
-#define MCF_GPIO_DSCR_SSI_SSI_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
-#define MCF_GPIO_DSCR_LCD_LCD_DSE(x)               (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
-#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x)           (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
-#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x)         (((x)&0x03)<<0)
-
-/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
-#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
-
-/*********************************************************************
- *
- * Interrupt Controller (INTC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_INTC0_IPRH             MCF_REG32(0xFC048000)
-#define MCF_INTC0_IPRL             MCF_REG32(0xFC048004)
-#define MCF_INTC0_IMRH             MCF_REG32(0xFC048008)
-#define MCF_INTC0_IMRL             MCF_REG32(0xFC04800C)
-#define MCF_INTC0_INTFRCH          MCF_REG32(0xFC048010)
-#define MCF_INTC0_INTFRCL          MCF_REG32(0xFC048014)
-#define MCF_INTC0_ICONFIG          MCF_REG16(0xFC04801A)
-#define MCF_INTC0_SIMR             MCF_REG08(0xFC04801C)
-#define MCF_INTC0_CIMR             MCF_REG08(0xFC04801D)
-#define MCF_INTC0_CLMASK           MCF_REG08(0xFC04801E)
-#define MCF_INTC0_SLMASK           MCF_REG08(0xFC04801F)
-#define MCF_INTC0_ICR0             MCF_REG08(0xFC048040)
-#define MCF_INTC0_ICR1             MCF_REG08(0xFC048041)
-#define MCF_INTC0_ICR2             MCF_REG08(0xFC048042)
-#define MCF_INTC0_ICR3             MCF_REG08(0xFC048043)
-#define MCF_INTC0_ICR4             MCF_REG08(0xFC048044)
-#define MCF_INTC0_ICR5             MCF_REG08(0xFC048045)
-#define MCF_INTC0_ICR6             MCF_REG08(0xFC048046)
-#define MCF_INTC0_ICR7             MCF_REG08(0xFC048047)
-#define MCF_INTC0_ICR8             MCF_REG08(0xFC048048)
-#define MCF_INTC0_ICR9             MCF_REG08(0xFC048049)
-#define MCF_INTC0_ICR10            MCF_REG08(0xFC04804A)
-#define MCF_INTC0_ICR11            MCF_REG08(0xFC04804B)
-#define MCF_INTC0_ICR12            MCF_REG08(0xFC04804C)
-#define MCF_INTC0_ICR13            MCF_REG08(0xFC04804D)
-#define MCF_INTC0_ICR14            MCF_REG08(0xFC04804E)
-#define MCF_INTC0_ICR15            MCF_REG08(0xFC04804F)
-#define MCF_INTC0_ICR16            MCF_REG08(0xFC048050)
-#define MCF_INTC0_ICR17            MCF_REG08(0xFC048051)
-#define MCF_INTC0_ICR18            MCF_REG08(0xFC048052)
-#define MCF_INTC0_ICR19            MCF_REG08(0xFC048053)
-#define MCF_INTC0_ICR20            MCF_REG08(0xFC048054)
-#define MCF_INTC0_ICR21            MCF_REG08(0xFC048055)
-#define MCF_INTC0_ICR22            MCF_REG08(0xFC048056)
-#define MCF_INTC0_ICR23            MCF_REG08(0xFC048057)
-#define MCF_INTC0_ICR24            MCF_REG08(0xFC048058)
-#define MCF_INTC0_ICR25            MCF_REG08(0xFC048059)
-#define MCF_INTC0_ICR26            MCF_REG08(0xFC04805A)
-#define MCF_INTC0_ICR27            MCF_REG08(0xFC04805B)
-#define MCF_INTC0_ICR28            MCF_REG08(0xFC04805C)
-#define MCF_INTC0_ICR29            MCF_REG08(0xFC04805D)
-#define MCF_INTC0_ICR30            MCF_REG08(0xFC04805E)
-#define MCF_INTC0_ICR31            MCF_REG08(0xFC04805F)
-#define MCF_INTC0_ICR32            MCF_REG08(0xFC048060)
-#define MCF_INTC0_ICR33            MCF_REG08(0xFC048061)
-#define MCF_INTC0_ICR34            MCF_REG08(0xFC048062)
-#define MCF_INTC0_ICR35            MCF_REG08(0xFC048063)
-#define MCF_INTC0_ICR36            MCF_REG08(0xFC048064)
-#define MCF_INTC0_ICR37            MCF_REG08(0xFC048065)
-#define MCF_INTC0_ICR38            MCF_REG08(0xFC048066)
-#define MCF_INTC0_ICR39            MCF_REG08(0xFC048067)
-#define MCF_INTC0_ICR40            MCF_REG08(0xFC048068)
-#define MCF_INTC0_ICR41            MCF_REG08(0xFC048069)
-#define MCF_INTC0_ICR42            MCF_REG08(0xFC04806A)
-#define MCF_INTC0_ICR43            MCF_REG08(0xFC04806B)
-#define MCF_INTC0_ICR44            MCF_REG08(0xFC04806C)
-#define MCF_INTC0_ICR45            MCF_REG08(0xFC04806D)
-#define MCF_INTC0_ICR46            MCF_REG08(0xFC04806E)
-#define MCF_INTC0_ICR47            MCF_REG08(0xFC04806F)
-#define MCF_INTC0_ICR48            MCF_REG08(0xFC048070)
-#define MCF_INTC0_ICR49            MCF_REG08(0xFC048071)
-#define MCF_INTC0_ICR50            MCF_REG08(0xFC048072)
-#define MCF_INTC0_ICR51            MCF_REG08(0xFC048073)
-#define MCF_INTC0_ICR52            MCF_REG08(0xFC048074)
-#define MCF_INTC0_ICR53            MCF_REG08(0xFC048075)
-#define MCF_INTC0_ICR54            MCF_REG08(0xFC048076)
-#define MCF_INTC0_ICR55            MCF_REG08(0xFC048077)
-#define MCF_INTC0_ICR56            MCF_REG08(0xFC048078)
-#define MCF_INTC0_ICR57            MCF_REG08(0xFC048079)
-#define MCF_INTC0_ICR58            MCF_REG08(0xFC04807A)
-#define MCF_INTC0_ICR59            MCF_REG08(0xFC04807B)
-#define MCF_INTC0_ICR60            MCF_REG08(0xFC04807C)
-#define MCF_INTC0_ICR61            MCF_REG08(0xFC04807D)
-#define MCF_INTC0_ICR62            MCF_REG08(0xFC04807E)
-#define MCF_INTC0_ICR63            MCF_REG08(0xFC04807F)
-#define MCF_INTC0_ICR(x)           MCF_REG08(0xFC048040+((x)*0x001))
-#define MCF_INTC0_SWIACK           MCF_REG08(0xFC0480E0)
-#define MCF_INTC0_L1IACK           MCF_REG08(0xFC0480E4)
-#define MCF_INTC0_L2IACK           MCF_REG08(0xFC0480E8)
-#define MCF_INTC0_L3IACK           MCF_REG08(0xFC0480EC)
-#define MCF_INTC0_L4IACK           MCF_REG08(0xFC0480F0)
-#define MCF_INTC0_L5IACK           MCF_REG08(0xFC0480F4)
-#define MCF_INTC0_L6IACK           MCF_REG08(0xFC0480F8)
-#define MCF_INTC0_L7IACK           MCF_REG08(0xFC0480FC)
-#define MCF_INTC0_LIACK(x)         MCF_REG08(0xFC0480E4+((x)*0x004))
-#define MCF_INTC1_IPRH             MCF_REG32(0xFC04C000)
-#define MCF_INTC1_IPRL             MCF_REG32(0xFC04C004)
-#define MCF_INTC1_IMRH             MCF_REG32(0xFC04C008)
-#define MCF_INTC1_IMRL             MCF_REG32(0xFC04C00C)
-#define MCF_INTC1_INTFRCH          MCF_REG32(0xFC04C010)
-#define MCF_INTC1_INTFRCL          MCF_REG32(0xFC04C014)
-#define MCF_INTC1_ICONFIG          MCF_REG16(0xFC04C01A)
-#define MCF_INTC1_SIMR             MCF_REG08(0xFC04C01C)
-#define MCF_INTC1_CIMR             MCF_REG08(0xFC04C01D)
-#define MCF_INTC1_CLMASK           MCF_REG08(0xFC04C01E)
-#define MCF_INTC1_SLMASK           MCF_REG08(0xFC04C01F)
-#define MCF_INTC1_ICR0             MCF_REG08(0xFC04C040)
-#define MCF_INTC1_ICR1             MCF_REG08(0xFC04C041)
-#define MCF_INTC1_ICR2             MCF_REG08(0xFC04C042)
-#define MCF_INTC1_ICR3             MCF_REG08(0xFC04C043)
-#define MCF_INTC1_ICR4             MCF_REG08(0xFC04C044)
-#define MCF_INTC1_ICR5             MCF_REG08(0xFC04C045)
-#define MCF_INTC1_ICR6             MCF_REG08(0xFC04C046)
-#define MCF_INTC1_ICR7             MCF_REG08(0xFC04C047)
-#define MCF_INTC1_ICR8             MCF_REG08(0xFC04C048)
-#define MCF_INTC1_ICR9             MCF_REG08(0xFC04C049)
-#define MCF_INTC1_ICR10            MCF_REG08(0xFC04C04A)
-#define MCF_INTC1_ICR11            MCF_REG08(0xFC04C04B)
-#define MCF_INTC1_ICR12            MCF_REG08(0xFC04C04C)
-#define MCF_INTC1_ICR13            MCF_REG08(0xFC04C04D)
-#define MCF_INTC1_ICR14            MCF_REG08(0xFC04C04E)
-#define MCF_INTC1_ICR15            MCF_REG08(0xFC04C04F)
-#define MCF_INTC1_ICR16            MCF_REG08(0xFC04C050)
-#define MCF_INTC1_ICR17            MCF_REG08(0xFC04C051)
-#define MCF_INTC1_ICR18            MCF_REG08(0xFC04C052)
-#define MCF_INTC1_ICR19            MCF_REG08(0xFC04C053)
-#define MCF_INTC1_ICR20            MCF_REG08(0xFC04C054)
-#define MCF_INTC1_ICR21            MCF_REG08(0xFC04C055)
-#define MCF_INTC1_ICR22            MCF_REG08(0xFC04C056)
-#define MCF_INTC1_ICR23            MCF_REG08(0xFC04C057)
-#define MCF_INTC1_ICR24            MCF_REG08(0xFC04C058)
-#define MCF_INTC1_ICR25            MCF_REG08(0xFC04C059)
-#define MCF_INTC1_ICR26            MCF_REG08(0xFC04C05A)
-#define MCF_INTC1_ICR27            MCF_REG08(0xFC04C05B)
-#define MCF_INTC1_ICR28            MCF_REG08(0xFC04C05C)
-#define MCF_INTC1_ICR29            MCF_REG08(0xFC04C05D)
-#define MCF_INTC1_ICR30            MCF_REG08(0xFC04C05E)
-#define MCF_INTC1_ICR31            MCF_REG08(0xFC04C05F)
-#define MCF_INTC1_ICR32            MCF_REG08(0xFC04C060)
-#define MCF_INTC1_ICR33            MCF_REG08(0xFC04C061)
-#define MCF_INTC1_ICR34            MCF_REG08(0xFC04C062)
-#define MCF_INTC1_ICR35            MCF_REG08(0xFC04C063)
-#define MCF_INTC1_ICR36            MCF_REG08(0xFC04C064)
-#define MCF_INTC1_ICR37            MCF_REG08(0xFC04C065)
-#define MCF_INTC1_ICR38            MCF_REG08(0xFC04C066)
-#define MCF_INTC1_ICR39            MCF_REG08(0xFC04C067)
-#define MCF_INTC1_ICR40            MCF_REG08(0xFC04C068)
-#define MCF_INTC1_ICR41            MCF_REG08(0xFC04C069)
-#define MCF_INTC1_ICR42            MCF_REG08(0xFC04C06A)
-#define MCF_INTC1_ICR43            MCF_REG08(0xFC04C06B)
-#define MCF_INTC1_ICR44            MCF_REG08(0xFC04C06C)
-#define MCF_INTC1_ICR45            MCF_REG08(0xFC04C06D)
-#define MCF_INTC1_ICR46            MCF_REG08(0xFC04C06E)
-#define MCF_INTC1_ICR47            MCF_REG08(0xFC04C06F)
-#define MCF_INTC1_ICR48            MCF_REG08(0xFC04C070)
-#define MCF_INTC1_ICR49            MCF_REG08(0xFC04C071)
-#define MCF_INTC1_ICR50            MCF_REG08(0xFC04C072)
-#define MCF_INTC1_ICR51            MCF_REG08(0xFC04C073)
-#define MCF_INTC1_ICR52            MCF_REG08(0xFC04C074)
-#define MCF_INTC1_ICR53            MCF_REG08(0xFC04C075)
-#define MCF_INTC1_ICR54            MCF_REG08(0xFC04C076)
-#define MCF_INTC1_ICR55            MCF_REG08(0xFC04C077)
-#define MCF_INTC1_ICR56            MCF_REG08(0xFC04C078)
-#define MCF_INTC1_ICR57            MCF_REG08(0xFC04C079)
-#define MCF_INTC1_ICR58            MCF_REG08(0xFC04C07A)
-#define MCF_INTC1_ICR59            MCF_REG08(0xFC04C07B)
-#define MCF_INTC1_ICR60            MCF_REG08(0xFC04C07C)
-#define MCF_INTC1_ICR61            MCF_REG08(0xFC04C07D)
-#define MCF_INTC1_ICR62            MCF_REG08(0xFC04C07E)
-#define MCF_INTC1_ICR63            MCF_REG08(0xFC04C07F)
-#define MCF_INTC1_ICR(x)           MCF_REG08(0xFC04C040+((x)*0x001))
-#define MCF_INTC1_SWIACK           MCF_REG08(0xFC04C0E0)
-#define MCF_INTC1_L1IACK           MCF_REG08(0xFC04C0E4)
-#define MCF_INTC1_L2IACK           MCF_REG08(0xFC04C0E8)
-#define MCF_INTC1_L3IACK           MCF_REG08(0xFC04C0EC)
-#define MCF_INTC1_L4IACK           MCF_REG08(0xFC04C0F0)
-#define MCF_INTC1_L5IACK           MCF_REG08(0xFC04C0F4)
-#define MCF_INTC1_L6IACK           MCF_REG08(0xFC04C0F8)
-#define MCF_INTC1_L7IACK           MCF_REG08(0xFC04C0FC)
-#define MCF_INTC1_LIACK(x)         MCF_REG08(0xFC04C0E4+((x)*0x004))
-#define MCF_INTC_IPRH(x)           MCF_REG32(0xFC048000+((x)*0x4000))
-#define MCF_INTC_IPRL(x)           MCF_REG32(0xFC048004+((x)*0x4000))
-#define MCF_INTC_IMRH(x)           MCF_REG32(0xFC048008+((x)*0x4000))
-#define MCF_INTC_IMRL(x)           MCF_REG32(0xFC04800C+((x)*0x4000))
-#define MCF_INTC_INTFRCH(x)        MCF_REG32(0xFC048010+((x)*0x4000))
-#define MCF_INTC_INTFRCL(x)        MCF_REG32(0xFC048014+((x)*0x4000))
-#define MCF_INTC_ICONFIG(x)        MCF_REG16(0xFC04801A+((x)*0x4000))
-#define MCF_INTC_SIMR(x)           MCF_REG08(0xFC04801C+((x)*0x4000))
-#define MCF_INTC_CIMR(x)           MCF_REG08(0xFC04801D+((x)*0x4000))
-#define MCF_INTC_CLMASK(x)         MCF_REG08(0xFC04801E+((x)*0x4000))
-#define MCF_INTC_SLMASK(x)         MCF_REG08(0xFC04801F+((x)*0x4000))
-#define MCF_INTC_ICR0(x)           MCF_REG08(0xFC048040+((x)*0x4000))
-#define MCF_INTC_ICR1(x)           MCF_REG08(0xFC048041+((x)*0x4000))
-#define MCF_INTC_ICR2(x)           MCF_REG08(0xFC048042+((x)*0x4000))
-#define MCF_INTC_ICR3(x)           MCF_REG08(0xFC048043+((x)*0x4000))
-#define MCF_INTC_ICR4(x)           MCF_REG08(0xFC048044+((x)*0x4000))
-#define MCF_INTC_ICR5(x)           MCF_REG08(0xFC048045+((x)*0x4000))
-#define MCF_INTC_ICR6(x)           MCF_REG08(0xFC048046+((x)*0x4000))
-#define MCF_INTC_ICR7(x)           MCF_REG08(0xFC048047+((x)*0x4000))
-#define MCF_INTC_ICR8(x)           MCF_REG08(0xFC048048+((x)*0x4000))
-#define MCF_INTC_ICR9(x)           MCF_REG08(0xFC048049+((x)*0x4000))
-#define MCF_INTC_ICR10(x)          MCF_REG08(0xFC04804A+((x)*0x4000))
-#define MCF_INTC_ICR11(x)          MCF_REG08(0xFC04804B+((x)*0x4000))
-#define MCF_INTC_ICR12(x)          MCF_REG08(0xFC04804C+((x)*0x4000))
-#define MCF_INTC_ICR13(x)          MCF_REG08(0xFC04804D+((x)*0x4000))
-#define MCF_INTC_ICR14(x)          MCF_REG08(0xFC04804E+((x)*0x4000))
-#define MCF_INTC_ICR15(x)          MCF_REG08(0xFC04804F+((x)*0x4000))
-#define MCF_INTC_ICR16(x)          MCF_REG08(0xFC048050+((x)*0x4000))
-#define MCF_INTC_ICR17(x)          MCF_REG08(0xFC048051+((x)*0x4000))
-#define MCF_INTC_ICR18(x)          MCF_REG08(0xFC048052+((x)*0x4000))
-#define MCF_INTC_ICR19(x)          MCF_REG08(0xFC048053+((x)*0x4000))
-#define MCF_INTC_ICR20(x)          MCF_REG08(0xFC048054+((x)*0x4000))
-#define MCF_INTC_ICR21(x)          MCF_REG08(0xFC048055+((x)*0x4000))
-#define MCF_INTC_ICR22(x)          MCF_REG08(0xFC048056+((x)*0x4000))
-#define MCF_INTC_ICR23(x)          MCF_REG08(0xFC048057+((x)*0x4000))
-#define MCF_INTC_ICR24(x)          MCF_REG08(0xFC048058+((x)*0x4000))
-#define MCF_INTC_ICR25(x)          MCF_REG08(0xFC048059+((x)*0x4000))
-#define MCF_INTC_ICR26(x)          MCF_REG08(0xFC04805A+((x)*0x4000))
-#define MCF_INTC_ICR27(x)          MCF_REG08(0xFC04805B+((x)*0x4000))
-#define MCF_INTC_ICR28(x)          MCF_REG08(0xFC04805C+((x)*0x4000))
-#define MCF_INTC_ICR29(x)          MCF_REG08(0xFC04805D+((x)*0x4000))
-#define MCF_INTC_ICR30(x)          MCF_REG08(0xFC04805E+((x)*0x4000))
-#define MCF_INTC_ICR31(x)          MCF_REG08(0xFC04805F+((x)*0x4000))
-#define MCF_INTC_ICR32(x)          MCF_REG08(0xFC048060+((x)*0x4000))
-#define MCF_INTC_ICR33(x)          MCF_REG08(0xFC048061+((x)*0x4000))
-#define MCF_INTC_ICR34(x)          MCF_REG08(0xFC048062+((x)*0x4000))
-#define MCF_INTC_ICR35(x)          MCF_REG08(0xFC048063+((x)*0x4000))
-#define MCF_INTC_ICR36(x)          MCF_REG08(0xFC048064+((x)*0x4000))
-#define MCF_INTC_ICR37(x)          MCF_REG08(0xFC048065+((x)*0x4000))
-#define MCF_INTC_ICR38(x)          MCF_REG08(0xFC048066+((x)*0x4000))
-#define MCF_INTC_ICR39(x)          MCF_REG08(0xFC048067+((x)*0x4000))
-#define MCF_INTC_ICR40(x)          MCF_REG08(0xFC048068+((x)*0x4000))
-#define MCF_INTC_ICR41(x)          MCF_REG08(0xFC048069+((x)*0x4000))
-#define MCF_INTC_ICR42(x)          MCF_REG08(0xFC04806A+((x)*0x4000))
-#define MCF_INTC_ICR43(x)          MCF_REG08(0xFC04806B+((x)*0x4000))
-#define MCF_INTC_ICR44(x)          MCF_REG08(0xFC04806C+((x)*0x4000))
-#define MCF_INTC_ICR45(x)          MCF_REG08(0xFC04806D+((x)*0x4000))
-#define MCF_INTC_ICR46(x)          MCF_REG08(0xFC04806E+((x)*0x4000))
-#define MCF_INTC_ICR47(x)          MCF_REG08(0xFC04806F+((x)*0x4000))
-#define MCF_INTC_ICR48(x)          MCF_REG08(0xFC048070+((x)*0x4000))
-#define MCF_INTC_ICR49(x)          MCF_REG08(0xFC048071+((x)*0x4000))
-#define MCF_INTC_ICR50(x)          MCF_REG08(0xFC048072+((x)*0x4000))
-#define MCF_INTC_ICR51(x)          MCF_REG08(0xFC048073+((x)*0x4000))
-#define MCF_INTC_ICR52(x)          MCF_REG08(0xFC048074+((x)*0x4000))
-#define MCF_INTC_ICR53(x)          MCF_REG08(0xFC048075+((x)*0x4000))
-#define MCF_INTC_ICR54(x)          MCF_REG08(0xFC048076+((x)*0x4000))
-#define MCF_INTC_ICR55(x)          MCF_REG08(0xFC048077+((x)*0x4000))
-#define MCF_INTC_ICR56(x)          MCF_REG08(0xFC048078+((x)*0x4000))
-#define MCF_INTC_ICR57(x)          MCF_REG08(0xFC048079+((x)*0x4000))
-#define MCF_INTC_ICR58(x)          MCF_REG08(0xFC04807A+((x)*0x4000))
-#define MCF_INTC_ICR59(x)          MCF_REG08(0xFC04807B+((x)*0x4000))
-#define MCF_INTC_ICR60(x)          MCF_REG08(0xFC04807C+((x)*0x4000))
-#define MCF_INTC_ICR61(x)          MCF_REG08(0xFC04807D+((x)*0x4000))
-#define MCF_INTC_ICR62(x)          MCF_REG08(0xFC04807E+((x)*0x4000))
-#define MCF_INTC_ICR63(x)          MCF_REG08(0xFC04807F+((x)*0x4000))
-#define MCF_INTC_SWIACK(x)         MCF_REG08(0xFC0480E0+((x)*0x4000))
-#define MCF_INTC_L1IACK(x)         MCF_REG08(0xFC0480E4+((x)*0x4000))
-#define MCF_INTC_L2IACK(x)         MCF_REG08(0xFC0480E8+((x)*0x4000))
-#define MCF_INTC_L3IACK(x)         MCF_REG08(0xFC0480EC+((x)*0x4000))
-#define MCF_INTC_L4IACK(x)         MCF_REG08(0xFC0480F0+((x)*0x4000))
-#define MCF_INTC_L5IACK(x)         MCF_REG08(0xFC0480F4+((x)*0x4000))
-#define MCF_INTC_L6IACK(x)         MCF_REG08(0xFC0480F8+((x)*0x4000))
-#define MCF_INTC_L7IACK(x)         MCF_REG08(0xFC0480FC+((x)*0x4000))
-
-/* Bit definitions and macros for MCF_INTC_IPRH */
-#define MCF_INTC_IPRH_INT32        (0x00000001)
-#define MCF_INTC_IPRH_INT33        (0x00000002)
-#define MCF_INTC_IPRH_INT34        (0x00000004)
-#define MCF_INTC_IPRH_INT35        (0x00000008)
-#define MCF_INTC_IPRH_INT36        (0x00000010)
-#define MCF_INTC_IPRH_INT37        (0x00000020)
-#define MCF_INTC_IPRH_INT38        (0x00000040)
-#define MCF_INTC_IPRH_INT39        (0x00000080)
-#define MCF_INTC_IPRH_INT40        (0x00000100)
-#define MCF_INTC_IPRH_INT41        (0x00000200)
-#define MCF_INTC_IPRH_INT42        (0x00000400)
-#define MCF_INTC_IPRH_INT43        (0x00000800)
-#define MCF_INTC_IPRH_INT44        (0x00001000)
-#define MCF_INTC_IPRH_INT45        (0x00002000)
-#define MCF_INTC_IPRH_INT46        (0x00004000)
-#define MCF_INTC_IPRH_INT47        (0x00008000)
-#define MCF_INTC_IPRH_INT48        (0x00010000)
-#define MCF_INTC_IPRH_INT49        (0x00020000)
-#define MCF_INTC_IPRH_INT50        (0x00040000)
-#define MCF_INTC_IPRH_INT51        (0x00080000)
-#define MCF_INTC_IPRH_INT52        (0x00100000)
-#define MCF_INTC_IPRH_INT53        (0x00200000)
-#define MCF_INTC_IPRH_INT54        (0x00400000)
-#define MCF_INTC_IPRH_INT55        (0x00800000)
-#define MCF_INTC_IPRH_INT56        (0x01000000)
-#define MCF_INTC_IPRH_INT57        (0x02000000)
-#define MCF_INTC_IPRH_INT58        (0x04000000)
-#define MCF_INTC_IPRH_INT59        (0x08000000)
-#define MCF_INTC_IPRH_INT60        (0x10000000)
-#define MCF_INTC_IPRH_INT61        (0x20000000)
-#define MCF_INTC_IPRH_INT62        (0x40000000)
-#define MCF_INTC_IPRH_INT63        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IPRL */
-#define MCF_INTC_IPRL_INT0         (0x00000001)
-#define MCF_INTC_IPRL_INT1         (0x00000002)
-#define MCF_INTC_IPRL_INT2         (0x00000004)
-#define MCF_INTC_IPRL_INT3         (0x00000008)
-#define MCF_INTC_IPRL_INT4         (0x00000010)
-#define MCF_INTC_IPRL_INT5         (0x00000020)
-#define MCF_INTC_IPRL_INT6         (0x00000040)
-#define MCF_INTC_IPRL_INT7         (0x00000080)
-#define MCF_INTC_IPRL_INT8         (0x00000100)
-#define MCF_INTC_IPRL_INT9         (0x00000200)
-#define MCF_INTC_IPRL_INT10        (0x00000400)
-#define MCF_INTC_IPRL_INT11        (0x00000800)
-#define MCF_INTC_IPRL_INT12        (0x00001000)
-#define MCF_INTC_IPRL_INT13        (0x00002000)
-#define MCF_INTC_IPRL_INT14        (0x00004000)
-#define MCF_INTC_IPRL_INT15        (0x00008000)
-#define MCF_INTC_IPRL_INT16        (0x00010000)
-#define MCF_INTC_IPRL_INT17        (0x00020000)
-#define MCF_INTC_IPRL_INT18        (0x00040000)
-#define MCF_INTC_IPRL_INT19        (0x00080000)
-#define MCF_INTC_IPRL_INT20        (0x00100000)
-#define MCF_INTC_IPRL_INT21        (0x00200000)
-#define MCF_INTC_IPRL_INT22        (0x00400000)
-#define MCF_INTC_IPRL_INT23        (0x00800000)
-#define MCF_INTC_IPRL_INT24        (0x01000000)
-#define MCF_INTC_IPRL_INT25        (0x02000000)
-#define MCF_INTC_IPRL_INT26        (0x04000000)
-#define MCF_INTC_IPRL_INT27        (0x08000000)
-#define MCF_INTC_IPRL_INT28        (0x10000000)
-#define MCF_INTC_IPRL_INT29        (0x20000000)
-#define MCF_INTC_IPRL_INT30        (0x40000000)
-#define MCF_INTC_IPRL_INT31        (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRH */
-#define MCF_INTC_IMRH_INT_MASK32   (0x00000001)
-#define MCF_INTC_IMRH_INT_MASK33   (0x00000002)
-#define MCF_INTC_IMRH_INT_MASK34   (0x00000004)
-#define MCF_INTC_IMRH_INT_MASK35   (0x00000008)
-#define MCF_INTC_IMRH_INT_MASK36   (0x00000010)
-#define MCF_INTC_IMRH_INT_MASK37   (0x00000020)
-#define MCF_INTC_IMRH_INT_MASK38   (0x00000040)
-#define MCF_INTC_IMRH_INT_MASK39   (0x00000080)
-#define MCF_INTC_IMRH_INT_MASK40   (0x00000100)
-#define MCF_INTC_IMRH_INT_MASK41   (0x00000200)
-#define MCF_INTC_IMRH_INT_MASK42   (0x00000400)
-#define MCF_INTC_IMRH_INT_MASK43   (0x00000800)
-#define MCF_INTC_IMRH_INT_MASK44   (0x00001000)
-#define MCF_INTC_IMRH_INT_MASK45   (0x00002000)
-#define MCF_INTC_IMRH_INT_MASK46   (0x00004000)
-#define MCF_INTC_IMRH_INT_MASK47   (0x00008000)
-#define MCF_INTC_IMRH_INT_MASK48   (0x00010000)
-#define MCF_INTC_IMRH_INT_MASK49   (0x00020000)
-#define MCF_INTC_IMRH_INT_MASK50   (0x00040000)
-#define MCF_INTC_IMRH_INT_MASK51   (0x00080000)
-#define MCF_INTC_IMRH_INT_MASK52   (0x00100000)
-#define MCF_INTC_IMRH_INT_MASK53   (0x00200000)
-#define MCF_INTC_IMRH_INT_MASK54   (0x00400000)
-#define MCF_INTC_IMRH_INT_MASK55   (0x00800000)
-#define MCF_INTC_IMRH_INT_MASK56   (0x01000000)
-#define MCF_INTC_IMRH_INT_MASK57   (0x02000000)
-#define MCF_INTC_IMRH_INT_MASK58   (0x04000000)
-#define MCF_INTC_IMRH_INT_MASK59   (0x08000000)
-#define MCF_INTC_IMRH_INT_MASK60   (0x10000000)
-#define MCF_INTC_IMRH_INT_MASK61   (0x20000000)
-#define MCF_INTC_IMRH_INT_MASK62   (0x40000000)
-#define MCF_INTC_IMRH_INT_MASK63   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_IMRL */
-#define MCF_INTC_IMRL_INT_MASK0    (0x00000001)
-#define MCF_INTC_IMRL_INT_MASK1    (0x00000002)
-#define MCF_INTC_IMRL_INT_MASK2    (0x00000004)
-#define MCF_INTC_IMRL_INT_MASK3    (0x00000008)
-#define MCF_INTC_IMRL_INT_MASK4    (0x00000010)
-#define MCF_INTC_IMRL_INT_MASK5    (0x00000020)
-#define MCF_INTC_IMRL_INT_MASK6    (0x00000040)
-#define MCF_INTC_IMRL_INT_MASK7    (0x00000080)
-#define MCF_INTC_IMRL_INT_MASK8    (0x00000100)
-#define MCF_INTC_IMRL_INT_MASK9    (0x00000200)
-#define MCF_INTC_IMRL_INT_MASK10   (0x00000400)
-#define MCF_INTC_IMRL_INT_MASK11   (0x00000800)
-#define MCF_INTC_IMRL_INT_MASK12   (0x00001000)
-#define MCF_INTC_IMRL_INT_MASK13   (0x00002000)
-#define MCF_INTC_IMRL_INT_MASK14   (0x00004000)
-#define MCF_INTC_IMRL_INT_MASK15   (0x00008000)
-#define MCF_INTC_IMRL_INT_MASK16   (0x00010000)
-#define MCF_INTC_IMRL_INT_MASK17   (0x00020000)
-#define MCF_INTC_IMRL_INT_MASK18   (0x00040000)
-#define MCF_INTC_IMRL_INT_MASK19   (0x00080000)
-#define MCF_INTC_IMRL_INT_MASK20   (0x00100000)
-#define MCF_INTC_IMRL_INT_MASK21   (0x00200000)
-#define MCF_INTC_IMRL_INT_MASK22   (0x00400000)
-#define MCF_INTC_IMRL_INT_MASK23   (0x00800000)
-#define MCF_INTC_IMRL_INT_MASK24   (0x01000000)
-#define MCF_INTC_IMRL_INT_MASK25   (0x02000000)
-#define MCF_INTC_IMRL_INT_MASK26   (0x04000000)
-#define MCF_INTC_IMRL_INT_MASK27   (0x08000000)
-#define MCF_INTC_IMRL_INT_MASK28   (0x10000000)
-#define MCF_INTC_IMRL_INT_MASK29   (0x20000000)
-#define MCF_INTC_IMRL_INT_MASK30   (0x40000000)
-#define MCF_INTC_IMRL_INT_MASK31   (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCH */
-#define MCF_INTC_INTFRCH_INTFRC32  (0x00000001)
-#define MCF_INTC_INTFRCH_INTFRC33  (0x00000002)
-#define MCF_INTC_INTFRCH_INTFRC34  (0x00000004)
-#define MCF_INTC_INTFRCH_INTFRC35  (0x00000008)
-#define MCF_INTC_INTFRCH_INTFRC36  (0x00000010)
-#define MCF_INTC_INTFRCH_INTFRC37  (0x00000020)
-#define MCF_INTC_INTFRCH_INTFRC38  (0x00000040)
-#define MCF_INTC_INTFRCH_INTFRC39  (0x00000080)
-#define MCF_INTC_INTFRCH_INTFRC40  (0x00000100)
-#define MCF_INTC_INTFRCH_INTFRC41  (0x00000200)
-#define MCF_INTC_INTFRCH_INTFRC42  (0x00000400)
-#define MCF_INTC_INTFRCH_INTFRC43  (0x00000800)
-#define MCF_INTC_INTFRCH_INTFRC44  (0x00001000)
-#define MCF_INTC_INTFRCH_INTFRC45  (0x00002000)
-#define MCF_INTC_INTFRCH_INTFRC46  (0x00004000)
-#define MCF_INTC_INTFRCH_INTFRC47  (0x00008000)
-#define MCF_INTC_INTFRCH_INTFRC48  (0x00010000)
-#define MCF_INTC_INTFRCH_INTFRC49  (0x00020000)
-#define MCF_INTC_INTFRCH_INTFRC50  (0x00040000)
-#define MCF_INTC_INTFRCH_INTFRC51  (0x00080000)
-#define MCF_INTC_INTFRCH_INTFRC52  (0x00100000)
-#define MCF_INTC_INTFRCH_INTFRC53  (0x00200000)
-#define MCF_INTC_INTFRCH_INTFRC54  (0x00400000)
-#define MCF_INTC_INTFRCH_INTFRC55  (0x00800000)
-#define MCF_INTC_INTFRCH_INTFRC56  (0x01000000)
-#define MCF_INTC_INTFRCH_INTFRC57  (0x02000000)
-#define MCF_INTC_INTFRCH_INTFRC58  (0x04000000)
-#define MCF_INTC_INTFRCH_INTFRC59  (0x08000000)
-#define MCF_INTC_INTFRCH_INTFRC60  (0x10000000)
-#define MCF_INTC_INTFRCH_INTFRC61  (0x20000000)
-#define MCF_INTC_INTFRCH_INTFRC62  (0x40000000)
-#define MCF_INTC_INTFRCH_INTFRC63  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_INTFRCL */
-#define MCF_INTC_INTFRCL_INTFRC0   (0x00000001)
-#define MCF_INTC_INTFRCL_INTFRC1   (0x00000002)
-#define MCF_INTC_INTFRCL_INTFRC2   (0x00000004)
-#define MCF_INTC_INTFRCL_INTFRC3   (0x00000008)
-#define MCF_INTC_INTFRCL_INTFRC4   (0x00000010)
-#define MCF_INTC_INTFRCL_INTFRC5   (0x00000020)
-#define MCF_INTC_INTFRCL_INTFRC6   (0x00000040)
-#define MCF_INTC_INTFRCL_INTFRC7   (0x00000080)
-#define MCF_INTC_INTFRCL_INTFRC8   (0x00000100)
-#define MCF_INTC_INTFRCL_INTFRC9   (0x00000200)
-#define MCF_INTC_INTFRCL_INTFRC10  (0x00000400)
-#define MCF_INTC_INTFRCL_INTFRC11  (0x00000800)
-#define MCF_INTC_INTFRCL_INTFRC12  (0x00001000)
-#define MCF_INTC_INTFRCL_INTFRC13  (0x00002000)
-#define MCF_INTC_INTFRCL_INTFRC14  (0x00004000)
-#define MCF_INTC_INTFRCL_INTFRC15  (0x00008000)
-#define MCF_INTC_INTFRCL_INTFRC16  (0x00010000)
-#define MCF_INTC_INTFRCL_INTFRC17  (0x00020000)
-#define MCF_INTC_INTFRCL_INTFRC18  (0x00040000)
-#define MCF_INTC_INTFRCL_INTFRC19  (0x00080000)
-#define MCF_INTC_INTFRCL_INTFRC20  (0x00100000)
-#define MCF_INTC_INTFRCL_INTFRC21  (0x00200000)
-#define MCF_INTC_INTFRCL_INTFRC22  (0x00400000)
-#define MCF_INTC_INTFRCL_INTFRC23  (0x00800000)
-#define MCF_INTC_INTFRCL_INTFRC24  (0x01000000)
-#define MCF_INTC_INTFRCL_INTFRC25  (0x02000000)
-#define MCF_INTC_INTFRCL_INTFRC26  (0x04000000)
-#define MCF_INTC_INTFRCL_INTFRC27  (0x08000000)
-#define MCF_INTC_INTFRCL_INTFRC28  (0x10000000)
-#define MCF_INTC_INTFRCL_INTFRC29  (0x20000000)
-#define MCF_INTC_INTFRCL_INTFRC30  (0x40000000)
-#define MCF_INTC_INTFRCL_INTFRC31  (0x80000000)
-
-/* Bit definitions and macros for MCF_INTC_ICONFIG */
-#define MCF_INTC_ICONFIG_EMASK     (0x0020)
-#define MCF_INTC_ICONFIG_ELVLPRI1  (0x0200)
-#define MCF_INTC_ICONFIG_ELVLPRI2  (0x0400)
-#define MCF_INTC_ICONFIG_ELVLPRI3  (0x0800)
-#define MCF_INTC_ICONFIG_ELVLPRI4  (0x1000)
-#define MCF_INTC_ICONFIG_ELVLPRI5  (0x2000)
-#define MCF_INTC_ICONFIG_ELVLPRI6  (0x4000)
-#define MCF_INTC_ICONFIG_ELVLPRI7  (0x8000)
-
-/* Bit definitions and macros for MCF_INTC_SIMR */
-#define MCF_INTC_SIMR_SIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CIMR */
-#define MCF_INTC_CIMR_CIMR(x)      (((x)&0x7F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_CLMASK */
-#define MCF_INTC_CLMASK_CLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SLMASK */
-#define MCF_INTC_SLMASK_SLMASK(x)  (((x)&0x0F)<<0)
-
-/* Bit definitions and macros for MCF_INTC_ICR */
-#define MCF_INTC_ICR_IL(x)         (((x)&0x07)<<0)
-
-/* Bit definitions and macros for MCF_INTC_SWIACK */
-#define MCF_INTC_SWIACK_VECTOR(x)  (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_INTC_LIACK */
-#define MCF_INTC_LIACK_VECTOR(x)   (((x)&0xFF)<<0)
-
-/********************************************************************/
-/*********************************************************************
-*
-* LCD Controller (LCDC)
-*
-*********************************************************************/
-
-/* Register read/write macros */
-#define MCF_LCDC_LSSAR                  MCF_REG32(0xFC0AC000)
-#define MCF_LCDC_LSR                    MCF_REG32(0xFC0AC004)
-#define MCF_LCDC_LVPWR                  MCF_REG32(0xFC0AC008)
-#define MCF_LCDC_LCPR                   MCF_REG32(0xFC0AC00C)
-#define MCF_LCDC_LCWHBR                 MCF_REG32(0xFC0AC010)
-#define MCF_LCDC_LCCMR                  MCF_REG32(0xFC0AC014)
-#define MCF_LCDC_LPCR                   MCF_REG32(0xFC0AC018)
-#define MCF_LCDC_LHCR                   MCF_REG32(0xFC0AC01C)
-#define MCF_LCDC_LVCR                   MCF_REG32(0xFC0AC020)
-#define MCF_LCDC_LPOR                   MCF_REG32(0xFC0AC024)
-#define MCF_LCDC_LSCR                   MCF_REG32(0xFC0AC028)
-#define MCF_LCDC_LPCCR                  MCF_REG32(0xFC0AC02C)
-#define MCF_LCDC_LDCR                   MCF_REG32(0xFC0AC030)
-#define MCF_LCDC_LRMCR                  MCF_REG32(0xFC0AC034)
-#define MCF_LCDC_LICR                   MCF_REG32(0xFC0AC038)
-#define MCF_LCDC_LIER                   MCF_REG32(0xFC0AC03C)
-#define MCF_LCDC_LISR                   MCF_REG32(0xFC0AC040)
-#define MCF_LCDC_LGWSAR                 MCF_REG32(0xFC0AC050)
-#define MCF_LCDC_LGWSR                  MCF_REG32(0xFC0AC054)
-#define MCF_LCDC_LGWVPWR                MCF_REG32(0xFC0AC058)
-#define MCF_LCDC_LGWPOR                 MCF_REG32(0xFC0AC05C)
-#define MCF_LCDC_LGWPR                  MCF_REG32(0xFC0AC060)
-#define MCF_LCDC_LGWCR                  MCF_REG32(0xFC0AC064)
-#define MCF_LCDC_LGWDCR                 MCF_REG32(0xFC0AC068)
-#define MCF_LCDC_BPLUT_BASE             MCF_REG32(0xFC0AC800)
-#define MCF_LCDC_GWLUT_BASE             MCF_REG32(0xFC0ACC00)
-
-/* Bit definitions and macros for MCF_LCDC_LSSAR */
-#define MCF_LCDC_LSSAR_SSA(x)           (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LSR */
-#define MCF_LCDC_LSR_YMAX(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LSR_XMAX(x)            (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LVPWR */
-#define MCF_LCDC_LVPWR_VPW(x)           (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LCPR */
-#define MCF_LCDC_LCPR_CYP(x)            (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LCPR_CXP(x)            (((x)&0x000003FF)<<16)
-#define MCF_LCDC_LCPR_OP                (0x10000000)
-#define MCF_LCDC_LCPR_CC(x)             (((x)&0x00000003)<<30)
-#define MCF_LCDC_LCPR_CC_TRANSPARENT    (0x00000000)
-#define MCF_LCDC_LCPR_CC_OR             (0x40000000)
-#define MCF_LCDC_LCPR_CC_XOR            (0x80000000)
-#define MCF_LCDC_LCPR_CC_AND            (0xC0000000)
-#define MCF_LCDC_LCPR_OP_ON             (0x10000000)
-#define MCF_LCDC_LCPR_OP_OFF            (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCWHBR */
-#define MCF_LCDC_LCWHBR_BD(x)           (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LCWHBR_CH(x)           (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LCWHBR_CW(x)           (((x)&0x0000001F)<<24)
-#define MCF_LCDC_LCWHBR_BK_EN           (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_ON        (0x80000000)
-#define MCF_LCDC_LCWHBR_BK_EN_OFF       (0x00000000)
-
-/* Bit definitions and macros for MCF_LCDC_LCCMR */
-#define MCF_LCDC_LCCMR_CUR_COL_B(x)     (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LCCMR_CUR_COL_G(x)     (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LCCMR_CUR_COL_R(x)     (((x)&0x0000003F)<<12)
-
-/* Bit definitions and macros for MCF_LCDC_LPCR */
-#define MCF_LCDC_LPCR_PCD(x)            (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LPCR_SHARP             (0x00000040)
-#define MCF_LCDC_LPCR_SCLKSEL           (0x00000080)
-#define MCF_LCDC_LPCR_ACD(x)            (((x)&0x0000007F)<<8)
-#define MCF_LCDC_LPCR_ACDSEL            (0x00008000)
-#define MCF_LCDC_LPCR_REV_VS            (0x00010000)
-#define MCF_LCDC_LPCR_SWAP_SEL          (0x00020000)
-#define MCF_LCDC_LPCR_ENDSEL            (0x00040000)
-#define MCF_LCDC_LPCR_SCLKIDLE          (0x00080000)
-#define MCF_LCDC_LPCR_OEPOL             (0x00100000)
-#define MCF_LCDC_LPCR_CLKPOL            (0x00200000)
-#define MCF_LCDC_LPCR_LPPOL             (0x00400000)
-#define MCF_LCDC_LPCR_FLM               (0x00800000)
-#define MCF_LCDC_LPCR_PIXPOL            (0x01000000)
-#define MCF_LCDC_LPCR_BPIX(x)           (((x)&0x00000007)<<25)
-#define MCF_LCDC_LPCR_PBSIZ(x)          (((x)&0x00000003)<<28)
-#define MCF_LCDC_LPCR_COLOR             (0x40000000)
-#define MCF_LCDC_LPCR_TFT               (0x80000000)
-#define MCF_LCDC_LPCR_MODE_MONOCGROME   (0x00000000)
-#define MCF_LCDC_LPCR_MODE_CSTN         (0x40000000)
-#define MCF_LCDC_LPCR_MODE_TFT          (0xC0000000)
-#define MCF_LCDC_LPCR_PBSIZ_1           (0x00000000)
-#define MCF_LCDC_LPCR_PBSIZ_2           (0x10000000)
-#define MCF_LCDC_LPCR_PBSIZ_4           (0x20000000)
-#define MCF_LCDC_LPCR_PBSIZ_8           (0x30000000)
-#define MCF_LCDC_LPCR_BPIX_1bpp         (0x00000000)
-#define MCF_LCDC_LPCR_BPIX_2bpp         (0x02000000)
-#define MCF_LCDC_LPCR_BPIX_4bpp         (0x04000000)
-#define MCF_LCDC_LPCR_BPIX_8bpp         (0x06000000)
-#define MCF_LCDC_LPCR_BPIX_12bpp        (0x08000000)
-#define MCF_LCDC_LPCR_BPIX_16bpp        (0x0A000000)
-#define MCF_LCDC_LPCR_BPIX_18bpp        (0x0C000000)
-
-#define MCF_LCDC_LPCR_PANEL_TYPE(x)     (((x)&0x00000003)<<30) 
-
-/* Bit definitions and macros for MCF_LCDC_LHCR */
-#define MCF_LCDC_LHCR_H_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LHCR_H_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LHCR_H_WIDTH(x)        (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LVCR */
-#define MCF_LCDC_LVCR_V_WAIT_2(x)       (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LVCR_V_WAIT_1(x)       (((x)&0x000000FF)<<8)
-#define MCF_LCDC_LVCR_V_WIDTH(x)      (((x)&0x0000003F)<<26)
-
-/* Bit definitions and macros for MCF_LCDC_LPOR */
-#define MCF_LCDC_LPOR_POS(x)            (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LPCCR */
-#define MCF_LCDC_LPCCR_PW(x)            (((x)&0x000000FF)<<0)
-#define MCF_LCDC_LPCCR_CC_EN            (0x00000100)
-#define MCF_LCDC_LPCCR_SCR(x)           (((x)&0x00000003)<<9)
-#define MCF_LCDC_LPCCR_LDMSK            (0x00008000)
-#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x)  (((x)&0x000001FF)<<16)
-#define MCF_LCDC_LPCCR_SCR_LINEPULSE    (0x00000000)
-#define MCF_LCDC_LPCCR_SCR_PIXELCLK     (0x00002000)
-#define MCF_LCDC_LPCCR_SCR_LCDCLOCK     (0x00004000)
-
-/* Bit definitions and macros for MCF_LCDC_LDCR */
-#define MCF_LCDC_LDCR_TM(x)             (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LDCR_HM(x)             (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LDCR_BURST             (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LRMCR */
-#define MCF_LCDC_LRMCR_SEL_REF          (0x00000001)
-
-/* Bit definitions and macros for MCF_LCDC_LICR */
-#define MCF_LCDC_LICR_INTCON            (0x00000001)
-#define MCF_LCDC_LICR_INTSYN            (0x00000004)
-#define MCF_LCDC_LICR_GW_INT_CON        (0x00000010)
-
-/* Bit definitions and macros for MCF_LCDC_LIER */
-#define MCF_LCDC_LIER_BOF_EN            (0x00000001)
-#define MCF_LCDC_LIER_EOF_EN            (0x00000002)
-#define MCF_LCDC_LIER_ERR_RES_EN        (0x00000004)
-#define MCF_LCDC_LIER_UDR_ERR_EN        (0x00000008)
-#define MCF_LCDC_LIER_GW_BOF_EN         (0x00000010)
-#define MCF_LCDC_LIER_GW_EOF_EN         (0x00000020)
-#define MCF_LCDC_LIER_GW_ERR_RES_EN     (0x00000040)
-#define MCF_LCDC_LIER_GW_UDR_ERR_EN     (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LISR */
-#define MCF_LCDC_LISR_BOF               (0x00000001)
-#define MCF_LCDC_LISR_EOF               (0x00000002)
-#define MCF_LCDC_LISR_ERR_RES           (0x00000004)
-#define MCF_LCDC_LISR_UDR_ERR           (0x00000008)
-#define MCF_LCDC_LISR_GW_BOF            (0x00000010)
-#define MCF_LCDC_LISR_GW_EOF            (0x00000020)
-#define MCF_LCDC_LISR_GW_ERR_RES        (0x00000040)
-#define MCF_LCDC_LISR_GW_UDR_ERR        (0x00000080)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSAR */
-#define MCF_LCDC_LGWSAR_GWSA(x)         (((x)&0x3FFFFFFF)<<2)
-
-/* Bit definitions and macros for MCF_LCDC_LGWSR */
-#define MCF_LCDC_LGWSR_GWH(x)           (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWSR_GWW(x)           (((x)&0x0000003F)<<20)
-
-/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
-#define MCF_LCDC_LGWVPWR_GWVPW(x)       (((x)&0x000003FF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPOR */
-#define MCF_LCDC_LGWPOR_GWPO(x)         (((x)&0x0000001F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_LGWPR */
-#define MCF_LCDC_LGWPR_GWYP(x)          (((x)&0x000003FF)<<0)
-#define MCF_LCDC_LGWPR_GWXP(x)          (((x)&0x000003FF)<<16)
-
-/* Bit definitions and macros for MCF_LCDC_LGWCR */
-#define MCF_LCDC_LGWCR_GWCKB(x)         (((x)&0x0000003F)<<0)
-#define MCF_LCDC_LGWCR_GWCKG(x)         (((x)&0x0000003F)<<6)
-#define MCF_LCDC_LGWCR_GWCKR(x)         (((x)&0x0000003F)<<12)
-#define MCF_LCDC_LGWCR_GW_RVS           (0x00200000)
-#define MCF_LCDC_LGWCR_GWE              (0x00400000)
-#define MCF_LCDC_LGWCR_GWCKE            (0x00800000)
-#define MCF_LCDC_LGWCR_GWAV(x)          (((x)&0x000000FF)<<24)
-
-/* Bit definitions and macros for MCF_LCDC_LGWDCR */
-#define MCF_LCDC_LGWDCR_GWTM(x)         (((x)&0x0000001F)<<0)
-#define MCF_LCDC_LGWDCR_GWHM(x)         (((x)&0x0000001F)<<16)
-#define MCF_LCDC_LGWDCR_GWBT            (0x80000000)
-
-/* Bit definitions and macros for MCF_LCDC_LSCR */
-#define MCF_LCDC_LSCR_PS_RISE_DELAY(x)    (((x)&0x0000003F)<<26)
-#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x)   (((x)&0x000000FF)<<16)
-#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
-#define MCF_LCDC_LSCR_GRAY_2(x)  		  (((x)&0x0000000F)<<4)
-#define MCF_LCDC_LSCR_GRAY_1(x)  		  (((x)&0x0000000F)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
-#define MCF_LCDC_BPLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
-/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
-#define MCF_LCDC_GWLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
-
-/*********************************************************************
- *
- * Phase Locked Loop (PLL)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_PLL_PODR              MCF_REG08(0xFC0C0000)
-#define MCF_PLL_PLLCR             MCF_REG08(0xFC0C0004)
-#define MCF_PLL_PMDR              MCF_REG08(0xFC0C0008)
-#define MCF_PLL_PFDR              MCF_REG08(0xFC0C000C)
-
-/* Bit definitions and macros for MCF_PLL_PODR */
-#define MCF_PLL_PODR_BUSDIV(x)    (((x)&0x0F)<<0)
-#define MCF_PLL_PODR_CPUDIV(x)    (((x)&0x0F)<<4)
-
-/* Bit definitions and macros for MCF_PLL_PLLCR */
-#define MCF_PLL_PLLCR_DITHDEV(x)  (((x)&0x07)<<0)
-#define MCF_PLL_PLLCR_DITHEN      (0x80)
-
-/* Bit definitions and macros for MCF_PLL_PMDR */
-#define MCF_PLL_PMDR_MODDIV(x)    (((x)&0xFF)<<0)
-
-/* Bit definitions and macros for MCF_PLL_PFDR */
-#define MCF_PLL_PFDR_MFD(x)       (((x)&0xFF)<<0)
-
-/*********************************************************************
- *
- * System Control Module Registers (SCM)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SCM_MPR			MCF_REG32(0xFC000000)
-#define MCF_SCM_PACRA			MCF_REG32(0xFC000020)
-#define MCF_SCM_PACRB			MCF_REG32(0xFC000024)
-#define MCF_SCM_PACRC			MCF_REG32(0xFC000028)
-#define MCF_SCM_PACRD			MCF_REG32(0xFC00002C)
-#define MCF_SCM_PACRE			MCF_REG32(0xFC000040)
-#define MCF_SCM_PACRF			MCF_REG32(0xFC000044)
-
-#define MCF_SCM_BCR			MCF_REG32(0xFC040024)
-
-/*********************************************************************
- *
- * SDRAM Controller (SDRAMC)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_SDRAMC_SDMR			MCF_REG32(0xFC0B8000)
-#define MCF_SDRAMC_SDCR			MCF_REG32(0xFC0B8004)
-#define MCF_SDRAMC_SDCFG1		MCF_REG32(0xFC0B8008)
-#define MCF_SDRAMC_SDCFG2		MCF_REG32(0xFC0B800C)
-#define MCF_SDRAMC_LIMP_FIX		MCF_REG32(0xFC0B8080)
-#define MCF_SDRAMC_SDDS			MCF_REG32(0xFC0B8100)
-#define MCF_SDRAMC_SDCS0		MCF_REG32(0xFC0B8110)
-#define MCF_SDRAMC_SDCS1		MCF_REG32(0xFC0B8114)
-#define MCF_SDRAMC_SDCS2		MCF_REG32(0xFC0B8118)
-#define MCF_SDRAMC_SDCS3		MCF_REG32(0xFC0B811C)
-#define MCF_SDRAMC_SDCS(x)		MCF_REG32(0xFC0B8110+((x)*0x004))
-
-/* Bit definitions and macros for MCF_SDRAMC_SDMR */
-#define MCF_SDRAMC_SDMR_CMD		(0x00010000)
-#define MCF_SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)
-#define MCF_SDRAMC_SDMR_BNKAD(x)	(((x)&0x00000003)<<30)
-#define MCF_SDRAMC_SDMR_BNKAD_LMR	(0x00000000)
-#define MCF_SDRAMC_SDMR_BNKAD_LEMR	(0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCR */
-#define MCF_SDRAMC_SDCR_IPALL		(0x00000002)
-#define MCF_SDRAMC_SDCR_IREF		(0x00000004)
-#define MCF_SDRAMC_SDCR_DQS_OE(x)	(((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCR_PS(x)		(((x)&0x00000003)<<12)
-#define MCF_SDRAMC_SDCR_RCNT(x)		(((x)&0x0000003F)<<16)
-#define MCF_SDRAMC_SDCR_OE_RULE		(0x00400000)
-#define MCF_SDRAMC_SDCR_MUX(x)		(((x)&0x00000003)<<24)
-#define MCF_SDRAMC_SDCR_REF		(0x10000000)
-#define MCF_SDRAMC_SDCR_DDR		(0x20000000)
-#define MCF_SDRAMC_SDCR_CKE		(0x40000000)
-#define MCF_SDRAMC_SDCR_MODE_EN		(0x80000000)
-#define MCF_SDRAMC_SDCR_PS_16		(0x00002000)
-#define MCF_SDRAMC_SDCR_PS_32		(0x00000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
-#define MCF_SDRAMC_SDCFG1_WTLAT(x)	(((x)&0x00000007)<<4)
-#define MCF_SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)
-#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)
-#define MCF_SDRAMC_SDCFG1_ACT2RW(x)	(((x)&0x00000007)<<16)
-#define MCF_SDRAMC_SDCFG1_RDLAT(x)	(((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG1_SWT2RD(x)	(((x)&0x00000007)<<24)
-#define MCF_SDRAMC_SDCFG1_SRD2RW(x)	(((x)&0x0000000F)<<28)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
-#define MCF_SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)
-#define MCF_SDRAMC_SDCFG2_BRD2WT(x)	(((x)&0x0000000F)<<20)
-#define MCF_SDRAMC_SDCFG2_BWT2RW(x)	(((x)&0x0000000F)<<24)
-#define MCF_SDRAMC_SDCFG2_BRD2PRE(x)	(((x)&0x0000000F)<<28)
-
-/* Device Errata - LIMP mode work around */
-#define MCF_SDRAMC_REFRESH		(0x40000000)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDDS */
-#define MCF_SDRAMC_SDDS_SB_D(x)		(((x)&0x00000003)<<0)
-#define MCF_SDRAMC_SDDS_SB_S(x)		(((x)&0x00000003)<<2)
-#define MCF_SDRAMC_SDDS_SB_A(x)		(((x)&0x00000003)<<4)
-#define MCF_SDRAMC_SDDS_SB_C(x)		(((x)&0x00000003)<<6)
-#define MCF_SDRAMC_SDDS_SB_E(x)		(((x)&0x00000003)<<8)
-
-/* Bit definitions and macros for MCF_SDRAMC_SDCS */
-#define MCF_SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F)<<0)
-#define MCF_SDRAMC_SDCS_BASE(x)		(((x)&0x00000FFF)<<20)
-#define MCF_SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
-#define MCF_SDRAMC_SDCS_CSSZ_DIABLE	(0x00000000)
-#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE	(0x00000013)
-#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE	(0x00000014)
-#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE	(0x00000015)
-#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE	(0x00000016)
-#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
-#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
-#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
-#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
-#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
-#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
-#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE	(0x0000001D)
-#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE	(0x0000001E)
-#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE	(0x0000001F)
-
-/*********************************************************************
- *
- *      FlexCAN module registers
- *
- *********************************************************************/
-#define MCF_FLEXCAN_BASEADDR(x)		(0xFC020000+(x)*0x0800)
-#define MCF_FLEXCAN_CANMCR(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x00)
-#define MCF_FLEXCAN_CANCTRL(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x04)
-#define MCF_FLEXCAN_TIMER(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x08)
-#define MCF_FLEXCAN_RXGMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x10)
-#define MCF_FLEXCAN_RX14MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x14)
-#define MCF_FLEXCAN_RX15MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x18)
-#define MCF_FLEXCAN_ERRCNT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
-#define MCF_FLEXCAN_ERRSTAT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x20)
-#define MCF_FLEXCAN_IMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x28)
-#define MCF_FLEXCAN_IFLAG(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x30)
-
-#define MCF_FLEXCAN_MB_CNT(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
-#define MCF_FLEXCAN_MB_ID(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
-#define MCF_FLEXCAN_MB_DB(x,y,z)	MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
-
-/*
- *      FlexCAN Module Configuration Register
- */
-#define CANMCR_MDIS		(0x80000000)
-#define CANMCR_FRZ		(0x40000000)
-#define CANMCR_HALT		(0x10000000)
-#define CANMCR_SOFTRST		(0x02000000)
-#define CANMCR_FRZACK		(0x01000000)
-#define CANMCR_SUPV		(0x00800000)
-#define CANMCR_MAXMB(x)         ((x)&0x0F)
-
-/*
- *      FlexCAN Control Register
- */
-#define CANCTRL_PRESDIV(x)      (((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)          (((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)        (((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)        (((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK         (0x00008000)
-#define CANCTRL_ERRMSK	        (0x00004000)
-#define CANCTRL_CLKSRC		(0x00002000)
-#define CANCTRL_LPB	        (0x00001000)
-#define CANCTRL_SAMP	        (0x00000080)
-#define CANCTRL_BOFFREC         (0x00000040)
-#define CANCTRL_TSYNC           (0x00000020)
-#define CANCTRL_LBUF            (0x00000010)
-#define CANCTRL_LOM             (0x00000008)
-#define CANCTRL_PROPSEG(x)      ((x)&0x07)
-
-/*
- *      FlexCAN Error Counter Register
- */
-#define ERRCNT_RXECTR(x)        (((x)&0xFF)<<8)
-#define ERRCNT_TXECTR(x)        ((x)&0xFF)
-
-/*
- *      FlexCAN Error and Status Register
- */
-#define ERRSTAT_BITERR(x)       (((x)&0x03)<<14)
-#define ERRSTAT_ACKERR           (0x00002000)
-#define ERRSTAT_CRCERR           (0x00001000)
-#define ERRSTAT_FRMERR           (0x00000800)
-#define ERRSTAT_STFERR           (0x00000400)
-#define ERRSTAT_TXWRN            (0x00000200)
-#define ERRSTAT_RXWRN            (0x00000100)
-#define ERRSTAT_IDLE             (0x00000080)
-#define ERRSTAT_TXRX             (0x00000040)
-#define ERRSTAT_FLTCONF(x)       (((x)&0x03)<<4)
-#define ERRSTAT_BOFFINT          (0x00000004)
-#define ERRSTAT_ERRINT           (0x00000002)
-
-/*
- *      Interrupt Mask Register
- */
-#define IMASK_BUF15M		(0x8000)
-#define IMASK_BUF14M		(0x4000)
-#define IMASK_BUF13M		(0x2000)
-#define IMASK_BUF12M		(0x1000)
-#define IMASK_BUF11M		(0x0800)
-#define IMASK_BUF10M		(0x0400)
-#define IMASK_BUF9M		(0x0200)
-#define IMASK_BUF8M		(0x0100)
-#define IMASK_BUF7M		(0x0080)
-#define IMASK_BUF6M		(0x0040)
-#define IMASK_BUF5M		(0x0020)
-#define IMASK_BUF4M		(0x0010)
-#define IMASK_BUF3M		(0x0008)
-#define IMASK_BUF2M		(0x0004)
-#define IMASK_BUF1M		(0x0002)
-#define IMASK_BUF0M		(0x0001)
-#define IMASK_BUFnM(x)		(0x1<<(x))
-#define IMASK_BUFF_ENABLE_ALL	(0x1111)
-#define IMASK_BUFF_DISABLE_ALL	(0x0000)
-
-/*
- *      Interrupt Flag Register
- */
-#define IFLAG_BUF15M		(0x8000)
-#define IFLAG_BUF14M		(0x4000)
-#define IFLAG_BUF13M		(0x2000)
-#define IFLAG_BUF12M		(0x1000)
-#define IFLAG_BUF11M		(0x0800)
-#define IFLAG_BUF10M		(0x0400)
-#define IFLAG_BUF9M		(0x0200)
-#define IFLAG_BUF8M		(0x0100)
-#define IFLAG_BUF7M		(0x0080)
-#define IFLAG_BUF6M		(0x0040)
-#define IFLAG_BUF5M		(0x0020)
-#define IFLAG_BUF4M		(0x0010)
-#define IFLAG_BUF3M		(0x0008)
-#define IFLAG_BUF2M		(0x0004)
-#define IFLAG_BUF1M		(0x0002)
-#define IFLAG_BUF0M		(0x0001)
-#define IFLAG_BUFF_SET_ALL	(0xFFFF)
-#define IFLAG_BUFF_CLEAR_ALL	(0x0000)
-#define IFLAG_BUFnM(x)		(0x1<<(x))
-
-/*
- *      Message Buffers
- */
-#define MB_CNT_CODE(x)		(((x)&0x0F)<<24)
-#define MB_CNT_SRR		(0x00400000)
-#define MB_CNT_IDE		(0x00200000)
-#define MB_CNT_RTR		(0x00100000)
-#define MB_CNT_LENGTH(x)	(((x)&0x0F)<<16)
-#define MB_CNT_TIMESTAMP(x)	((x)&0xFFFF)
-#define MB_ID_STD(x)		(((x)&0x07FF)<<18)
-#define MB_ID_EXT(x)		((x)&0x3FFFF)
-
-/*********************************************************************
- *
- * Edge Port Module (EPORT)
- *
- *********************************************************************/
-
-/* Register read/write macros */
-#define MCF_EPORT_EPPAR                MCF_REG16(0xFC094000)
-#define MCF_EPORT_EPDDR                MCF_REG08(0xFC094002)
-#define MCF_EPORT_EPIER                MCF_REG08(0xFC094003)
-#define MCF_EPORT_EPDR                 MCF_REG08(0xFC094004)
-#define MCF_EPORT_EPPDR                MCF_REG08(0xFC094005)
-#define MCF_EPORT_EPFR                 MCF_REG08(0xFC094006)
-
-/* Bit definitions and macros for MCF_EPORT_EPPAR */
-#define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
-#define MCF_EPORT_EPPAR_EPPA2(x)       (((x)&0x0003)<<4)
-#define MCF_EPORT_EPPAR_EPPA3(x)       (((x)&0x0003)<<6)
-#define MCF_EPORT_EPPAR_EPPA4(x)       (((x)&0x0003)<<8)
-#define MCF_EPORT_EPPAR_EPPA5(x)       (((x)&0x0003)<<10)
-#define MCF_EPORT_EPPAR_EPPA6(x)       (((x)&0x0003)<<12)
-#define MCF_EPORT_EPPAR_EPPA7(x)       (((x)&0x0003)<<14)
-#define MCF_EPORT_EPPAR_LEVEL          (0)
-#define MCF_EPORT_EPPAR_RISING         (1)
-#define MCF_EPORT_EPPAR_FALLING        (2)
-#define MCF_EPORT_EPPAR_BOTH           (3)
-#define MCF_EPORT_EPPAR_EPPA7_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA7_RISING   (0x4000)
-#define MCF_EPORT_EPPAR_EPPA7_FALLING  (0x8000)
-#define MCF_EPORT_EPPAR_EPPA7_BOTH     (0xC000)
-#define MCF_EPORT_EPPAR_EPPA6_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA6_RISING   (0x1000)
-#define MCF_EPORT_EPPAR_EPPA6_FALLING  (0x2000)
-#define MCF_EPORT_EPPAR_EPPA6_BOTH     (0x3000)
-#define MCF_EPORT_EPPAR_EPPA5_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA5_RISING   (0x0400)
-#define MCF_EPORT_EPPAR_EPPA5_FALLING  (0x0800)
-#define MCF_EPORT_EPPAR_EPPA5_BOTH     (0x0C00)
-#define MCF_EPORT_EPPAR_EPPA4_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA4_RISING   (0x0100)
-#define MCF_EPORT_EPPAR_EPPA4_FALLING  (0x0200)
-#define MCF_EPORT_EPPAR_EPPA4_BOTH     (0x0300)
-#define MCF_EPORT_EPPAR_EPPA3_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA3_RISING   (0x0040)
-#define MCF_EPORT_EPPAR_EPPA3_FALLING  (0x0080)
-#define MCF_EPORT_EPPAR_EPPA3_BOTH     (0x00C0)
-#define MCF_EPORT_EPPAR_EPPA2_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA2_RISING   (0x0010)
-#define MCF_EPORT_EPPAR_EPPA2_FALLING  (0x0020)
-#define MCF_EPORT_EPPAR_EPPA2_BOTH     (0x0030)
-#define MCF_EPORT_EPPAR_EPPA1_LEVEL    (0x0000)
-#define MCF_EPORT_EPPAR_EPPA1_RISING   (0x0004)
-#define MCF_EPORT_EPPAR_EPPA1_FALLING  (0x0008)
-#define MCF_EPORT_EPPAR_EPPA1_BOTH     (0x000C)
-
-/* Bit definitions and macros for MCF_EPORT_EPDDR */
-#define MCF_EPORT_EPDDR_EPDD1          (0x02)
-#define MCF_EPORT_EPDDR_EPDD2          (0x04)
-#define MCF_EPORT_EPDDR_EPDD3          (0x08)
-#define MCF_EPORT_EPDDR_EPDD4          (0x10)
-#define MCF_EPORT_EPDDR_EPDD5          (0x20)
-#define MCF_EPORT_EPDDR_EPDD6          (0x40)
-#define MCF_EPORT_EPDDR_EPDD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPIER */
-#define MCF_EPORT_EPIER_EPIE1          (0x02)
-#define MCF_EPORT_EPIER_EPIE2          (0x04)
-#define MCF_EPORT_EPIER_EPIE3          (0x08)
-#define MCF_EPORT_EPIER_EPIE4          (0x10)
-#define MCF_EPORT_EPIER_EPIE5          (0x20)
-#define MCF_EPORT_EPIER_EPIE6          (0x40)
-#define MCF_EPORT_EPIER_EPIE7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPDR */
-#define MCF_EPORT_EPDR_EPD1            (0x02)
-#define MCF_EPORT_EPDR_EPD2            (0x04)
-#define MCF_EPORT_EPDR_EPD3            (0x08)
-#define MCF_EPORT_EPDR_EPD4            (0x10)
-#define MCF_EPORT_EPDR_EPD5            (0x20)
-#define MCF_EPORT_EPDR_EPD6            (0x40)
-#define MCF_EPORT_EPDR_EPD7            (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPPDR */
-#define MCF_EPORT_EPPDR_EPPD1          (0x02)
-#define MCF_EPORT_EPPDR_EPPD2          (0x04)
-#define MCF_EPORT_EPPDR_EPPD3          (0x08)
-#define MCF_EPORT_EPPDR_EPPD4          (0x10)
-#define MCF_EPORT_EPPDR_EPPD5          (0x20)
-#define MCF_EPORT_EPPDR_EPPD6          (0x40)
-#define MCF_EPORT_EPPDR_EPPD7          (0x80)
-
-/* Bit definitions and macros for MCF_EPORT_EPFR */
-#define MCF_EPORT_EPFR_EPF1            (0x02)
-#define MCF_EPORT_EPFR_EPF2            (0x04)
-#define MCF_EPORT_EPFR_EPF3            (0x08)
-#define MCF_EPORT_EPFR_EPF4            (0x10)
-#define MCF_EPORT_EPFR_EPF5            (0x20)
-#define MCF_EPORT_EPFR_EPF6            (0x40)
-#define MCF_EPORT_EPFR_EPF7            (0x80)
-
-/********************************************************************/
-#endif	/* m532xsim_h */
diff --git a/include/asm-m68knommu/m5407sim.h b/include/asm-m68knommu/m5407sim.h
deleted file mode 100644
index cc22c4a53005..000000000000
--- a/include/asm-m68knommu/m5407sim.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5407sim.h -- ColdFire 5407 System Integration Module support.
- *
- *	(C) Copyright 2000,  Lineo (www.lineo.com)
- *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
- *
- *      Modified by David W. Miller for the MCF5307 Eval Board.
- */
-
-/****************************************************************************/
-#ifndef	m5407sim_h
-#define	m5407sim_h
-/****************************************************************************/
-
-/*
- *	Define the 5407 SIM register set addresses.
- */
-#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
-#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
-#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
-#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
-#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
-#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
-#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
-#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
-#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
-#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
-#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
-#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
-#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
-#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
-#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
-#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
-#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
-#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
-#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
-#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
-#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
-#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
-#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
-
-#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
-
-#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
-#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
-#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
-#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
-#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
-#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
-#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
-#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
-#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
-#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
-#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
-#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
-#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
-
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
-
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
-
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5407.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
- *	Some symbol defines for the Parallel Port Pin Assignment Register
- */
-#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
-                                                /* Clear to select par I/O */
-#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
-                                                /* Clear to select par I/O */
-
-/*
- *       Defines for the IRQPAR Register
- */
-#define IRQ5_LEVEL4	0x80
-#define IRQ3_LEVEL6	0x40
-#define IRQ1_LEVEL2	0x20
-
-
-/*
- *	Define the Cache register flags.
- */
-#define	CACR_DEC		0x80000000	/* Enable data cache */
-#define	CACR_DWP		0x40000000	/* Data write protection */
-#define	CACR_DESB		0x20000000	/* Enable data store buffer */
-#define	CACR_DDPI		0x10000000	/* Disable CPUSHL */
-#define	CACR_DHCLK		0x08000000	/* Half data cache lock mode */
-#define	CACR_DDCM_WT		0x00000000	/* Write through cache*/
-#define	CACR_DDCM_CP		0x02000000	/* Copyback cache */
-#define	CACR_DDCM_P		0x04000000	/* No cache, precise */
-#define	CACR_DDCM_IMP		0x06000000	/* No cache, imprecise */
-#define	CACR_DCINVA		0x01000000	/* Invalidate data cache */
-#define	CACR_BEC		0x00080000	/* Enable branch cache */
-#define	CACR_BCINVA		0x00040000	/* Invalidate branch cache */
-#define	CACR_IEC		0x00008000	/* Enable instruction cache */
-#define	CACR_DNFB		0x00002000	/* Inhibited fill buffer */
-#define	CACR_IDPI		0x00001000	/* Disable CPUSHL */
-#define	CACR_IHLCK		0x00000800	/* Intruction cache half lock */
-#define	CACR_IDCM		0x00000400	/* Intruction cache inhibit */
-#define	CACR_ICINVA		0x00000100	/* Invalidate instr cache */
-
-#define	ACR_BASE_POS		24		/* Address Base */
-#define	ACR_MASK_POS		16		/* Address Mask */
-#define	ACR_ENABLE		0x00008000	/* Enable address */
-#define	ACR_USER		0x00000000	/* User mode access only */
-#define	ACR_SUPER		0x00002000	/* Supervisor mode only */
-#define	ACR_ANY			0x00004000	/* Match any access mode */
-#define	ACR_CM_WT		0x00000000	/* Write through mode */
-#define	ACR_CM_CP		0x00000020	/* Copyback mode */
-#define	ACR_CM_OFF_PRE		0x00000040	/* No cache, precise */
-#define	ACR_CM_OFF_IMP		0x00000060	/* No cache, imprecise */
-#define	ACR_WPROTECT		0x00000004	/* Write protect */
-
-/****************************************************************************/
-#endif	/* m5407sim_h */
diff --git a/include/asm-m68knommu/m68360.h b/include/asm-m68knommu/m68360.h
deleted file mode 100644
index eb7d39ef2855..000000000000
--- a/include/asm-m68knommu/m68360.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#include "m68360_regs.h"
-#include "m68360_pram.h"
-#include "m68360_quicc.h"
-#include "m68360_enet.h"
-
-#ifdef CONFIG_M68360
-
-#define CPM_INTERRUPT    4
-
-/* see MC68360 User's Manual, p. 7-377  */
-#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
-
-#endif /* CONFIG_M68360 */
diff --git a/include/asm-m68knommu/m68360_enet.h b/include/asm-m68knommu/m68360_enet.h
deleted file mode 100644
index c36f4d059203..000000000000
--- a/include/asm-m68knommu/m68360_enet.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/***********************************
- * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions for the ETHERNET controllers
- ***************************************
- */
-
-#ifndef __ETHER_H
-#define __ETHER_H
-
-#include "quicc_simple.h"
-
-/*
- * transmit BD's
- */
-#define T_R     0x8000          /* ready bit */
-#define E_T_PAD 0x4000          /* short frame padding */
-#define T_W     0x2000          /* wrap bit */
-#define T_I     0x1000          /* interrupt on completion */
-#define T_L     0x0800          /* last in frame */
-#define T_TC    0x0400          /* transmit CRC (when last) */
-
-#define T_DEF   0x0200          /* defer indication */
-#define T_HB    0x0100          /* heartbeat */
-#define T_LC    0x0080          /* error: late collision */
-#define T_RL    0x0040          /* error: retransmission limit */
-#define T_RC    0x003c          /* retry count */
-#define T_UN    0x0002          /* error: underrun */
-#define T_CSL   0x0001          /* carier sense lost */
-#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
-
-/*
- * receive BD's
- */
-#define R_E     0x8000          /* buffer empty */
-#define R_W     0x2000          /* wrap bit */
-#define R_I     0x1000          /* interrupt on reception */
-#define R_L     0x0800          /* last BD in frame */
-#define R_F     0x0400          /* first BD in frame */
-#define R_M     0x0100          /* received because of promisc. mode */
-
-#define R_LG    0x0020          /* frame too long */
-#define R_NO    0x0010          /* non-octet aligned */
-#define R_SH    0x0008          /* short frame */
-#define R_CR    0x0004          /* receive CRC error */
-#define R_OV    0x0002          /* receive overrun */
-#define R_CL    0x0001          /* collision */
-#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
-
-
-/*
- * ethernet interrupts
- */
-#define ETHERNET_GRA    0x0080  /* graceful stop complete */
-#define ETHERNET_TXE    0x0010  /* transmit error         */
-#define ETHERNET_RXF    0x0008  /* receive frame          */
-#define ETHERNET_BSY    0x0004  /* busy condition         */
-#define ETHERNET_TXB    0x0002  /* transmit buffer        */
-#define ETHERNET_RXB    0x0001  /* receive buffer         */
-
-/*
- * ethernet protocol specific mode register (PSMR)
- */
-#define ETHER_HBC       0x8000    /* heartbeat checking      */
-#define ETHER_FC        0x4000    /* force collision         */
-#define ETHER_RSH       0x2000    /* receive short frames    */
-#define ETHER_IAM       0x1000    /* individual address mode */
-#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
-#define ETHER_PRO       0x0200    /* promiscuous             */
-#define ETHER_BRO       0x0100    /* broadcast address       */
-#define ETHER_SBT       0x0080    /* stop backoff timer      */
-#define ETHER_LPB       0x0040    /* Loop Back Mode          */
-#define ETHER_SIP       0x0020    /* sample input pins       */
-#define ETHER_LCW       0x0010    /* late collision window   */
-#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
-#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
-#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
-#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
-#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
-#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
-#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
-#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
-
-/*
- * ethernet specific parameters
- */
-#define CRC_WORD 4          /* Length in bytes of CRC */               
-#define C_PRES   0xffffffff /* preform 32 bit CRC */
-#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
-#define CRCEC    0x00000000
-#define ALEC     0x00000000
-#define DISFC    0x00000000
-#define PADS     0x00000000
-#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
-#define ETH_MFLR 0x05ee     /* 1518 max frame size */
-#define MINFLR   0x0040     /* Minimum frame size 64 */
-#define MAXD1    0x05ee     /* Max dma count 1518 */
-#define MAXD2    0x05ee
-#define GADDR1   0x00000000 /* Clear group address */  
-#define GADDR2   0x00000000
-#define GADDR3   0x00000000    
-#define GADDR4   0x00000000    
-#define P_PER    0x00000000 /*not used */              
-#define IADDR1   0x00000000 /* Individual hash table not used */       
-#define IADDR2   0x00000000
-#define IADDR3   0x00000000    
-#define IADDR4   0x00000000            
-#define TADDR_H  0x00000000 /* clear this regs */              
-#define TADDR_M  0x00000000            
-#define TADDR_L  0x00000000            
-
-/*       SCC Parameter Ram */
-#define RFCR    0x18 /* normal operation */
-#define TFCR    0x18 /* normal operation */
-#define E_MRBLR 1518 /* Max ethernet frame length */
-
-/*
- * ethernet specific structure
- */
-typedef union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-} ETHER_ADDR;
-
-typedef struct {
-    int        max_frame_length;
-    int        promisc_mode;
-    int        reject_broadcast;
-    ETHER_ADDR phys_adr;
-} ETHER_SPECIFIC;
-
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[1];
-} ETHER_FRAME;
-
-#define MAX_DATALEN 1500
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[MAX_DATALEN];
-    unsigned char  fcs[CRC_WORD];
-} ETHER_MAX_FRAME;
-
-
-/*
- * Internal ethernet function prototypes
- */
-void        ether_interrupt(int scc_num);
-/* mleslie: debug */
-/* static void ethernet_rx_internal(int scc_num); */
-/* static void ethernet_tx_internal(int scc_num); */
-
-/*
- * User callable routines prototypes (ethernet specific)
- */
-void ethernet_init(int                       scc_number,
-                   alloc_routine             *alloc_buffer,
-                   free_routine              *free_buffer,
-                   store_rx_buffer_routine   *store_rx_buffer,
-                   handle_tx_error_routine   *handle_tx_error,
-                   handle_rx_error_routine   *handle_rx_error,
-                   handle_lost_error_routine *handle_lost_error,
-                   ETHER_SPECIFIC            *ether_spec);
-int  ethernet_tx(int scc_number, void *buf, int length);
-
-#endif
-
diff --git a/include/asm-m68knommu/m68360_pram.h b/include/asm-m68knommu/m68360_pram.h
deleted file mode 100644
index e6088bbce93d..000000000000
--- a/include/asm-m68knommu/m68360_pram.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/***********************************
- * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the parameter area RAM.
- * Note that different structures are overlaid
- * at the same offsets for the different modes
- * of operation.
- ***************************************
- */
-
-#ifndef __PRAM_H
-#define __PRAM_H
-
-/* Time slot assignment table */
-#define VALID_SLOT	0x8000
-#define WRAP_SLOT	0x4000
-
-/*****************************************************************
-        Global Multichannel parameter RAM
-*****************************************************************/
-struct global_multi_pram {
-    /*
-     * Global Multichannel parameter RAM
-     */
-    unsigned long   mcbase;		/* Multichannel Base pointer */
-    unsigned short  qmcstate;		/* Multichannel Controller state */
-    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
-    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
-    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
-    unsigned short  grfthr;		/* Global Receive frame threshold */
-    unsigned short  grfcnt;		/* Global Receive Frame Count */
-    unsigned long   intbase;		/* Multichannel Base address */
-    unsigned long   iintptr;		/* Pointer to interrupt queue */
-    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
-
-    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
-    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
-    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
-    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
-    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
-};
-
-/*****************************************************************
-        Quicc32 HDLC parameter RAM
-*****************************************************************/
-struct quicc32_pram {
-
-    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
-    unsigned short  chamr;		/* Channel Mode Register */
-    unsigned long   tstate;		/* Tx Internal State */
-    unsigned long   txintr;		/* Tx Internal Data Pointer */
-    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
-    unsigned short  txcntr;		/* Tx Internal Byte Count */
-    unsigned long   tupack;		/* (Tx Temp) */
-    unsigned long   zistate;		/* Zero Insertion machine state */
-    unsigned long   tcrc;		/* Temp Transmit CRC */
-    unsigned short  intmask;		/* Channel's interrupt mask flags */
-    unsigned short  bdflags;		
-    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
-    unsigned short  mflr;		/* Max Frame Length Register */
-    unsigned long   rstate;		/* Rx Internal State */
-    unsigned long   rxintr;		/* Rx Internal Data Pointer */
-    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
-    unsigned short  rxbyc;		/* Rx Internal Byte Count */
-    unsigned long   rpack;		/* (Rx Temp) */
-    unsigned long   zdstate;		/* Zero Deletion machine state */
-    unsigned long   rcrc;		/* Temp Transmit CRC */
-    unsigned short  maxc;		/* Max_length counter */
-    unsigned short  tmp_mb;		/* Temp */
-};
-
-
-/*****************************************************************
-        HDLC parameter RAM
-*****************************************************************/
-
-struct hdlc_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * HDLC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   c_mask;         /* CRC constant */
-    unsigned long   c_pres;         /* CRC preset */
-    unsigned short  disfc;          /* discarded frame counter */
-    unsigned short  crcec;          /* CRC error counter */
-    unsigned short  abtsc;          /* abort sequence counter */
-    unsigned short  nmarc;          /* nonmatching address rx cnt */
-    unsigned short  retrc;          /* frame retransmission cnt */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  max_cnt;        /* maximum length counter */
-    unsigned short  rfthr;          /* received frames threshold */
-    unsigned short  rfcnt;          /* received frames count */
-    unsigned short  hmask;          /* user defined frm addr mask */
-    unsigned short  haddr1;         /* user defined frm address 1 */
-    unsigned short  haddr2;         /* user defined frm address 2 */
-    unsigned short  haddr3;         /* user defined frm address 3 */
-    unsigned short  haddr4;         /* user defined frm address 4 */
-    unsigned short  tmp;            /* temp */
-    unsigned short  tmp_mb;         /* temp */
-};
-
-
-
-/*****************************************************************
-        UART parameter RAM
-*****************************************************************/
-
-/*
- * bits in uart control characters table
- */
-#define CC_INVALID  0x8000          /* control character is valid */
-#define CC_REJ      0x4000          /* don't store char in buffer */
-#define CC_CHAR     0x00ff          /* control character */
-
-/* UART */
-struct uart_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rx_temp;        /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * UART specific parameter RAM
-     */
-    unsigned char   RESERVED1[8];   /* Reserved area */
-    unsigned short  max_idl;        /* maximum idle characters */
-    unsigned short  idlc;           /* rx idle counter (internal) */
-    unsigned short  brkcr;          /* break count register */
-                   
-    unsigned short  parec;          /* Rx parity error counter */
-    unsigned short  frmer;          /* Rx framing error counter */
-    unsigned short  nosec;          /* Rx noise counter */
-    unsigned short  brkec;          /* Rx break character counter */
-    unsigned short  brkln;          /* Reaceive break length */
-                   
-    unsigned short  uaddr1;         /* address character 1 */
-    unsigned short  uaddr2;         /* address character 2 */
-    unsigned short  rtemp;          /* temp storage */
-    unsigned short  toseq;          /* Tx out of sequence char */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Rx control char mask */
-    unsigned short  rccr;           /* Rx control char register */
-    unsigned short  rlbc;           /* Receive last break char */
-};
-
-
-
-/*****************************************************************
-        BISYNC parameter RAM
-*****************************************************************/
-
-struct bisync_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * BISYNC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   crcc;           /* CRC Constant Temp Value */
-    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
-    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
-    unsigned short  parec;          /* Receive Parity Error Counter */
-    unsigned short  bsync;          /* BISYNC SYNC Character */
-    unsigned short  bdle;           /* BISYNC DLE Character */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Receive Control Character Mask */
-};
-
-/*****************************************************************
-        IOM2 parameter RAM
-        (overlaid on tx bd[5] of SCC channel[2])
-*****************************************************************/
-struct iom2_pram {
-    unsigned short  ci_data;        /* ci data */
-    unsigned short  monitor_data;   /* monitor data */
-    unsigned short  tstate;         /* transmitter state */
-    unsigned short  rstate;         /* receiver state */
-};
-
-/*****************************************************************
-        SPI/SMC parameter RAM
-        (overlaid on tx bd[6,7] of SCC channel[2])
-*****************************************************************/
-
-#define SPI_R       0x8000          /* Ready bit in BD */
-
-struct spi_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-};
-
-struct smc_uart_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  max_idl;        /* Maximum IDLE Characters */
-    unsigned short  idlc;           /* Temporary IDLE Counter */
-    unsigned short  brkln;          /* Last Rx Break Length */
-    unsigned short  brkec;          /* Rx Break Condition Counter */
-    unsigned short  brkcr;          /* Break Count Register (Tx) */
-    unsigned short  r_mask;         /* Temporary bit mask */
-};
-
-struct smc_trnsp_pram {
-    unsigned short  rbase;          /* rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  reserved[5];    /* Reserved */
-};
-
-struct idma_pram {
-    unsigned short  ibase;          /* IDMA BD Base Address */
-    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
-    unsigned long   istate;         /* IDMA internal state */
-    unsigned long   itemp;          /* IDMA temp */
-};
-
-struct ethernet_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * ETHERNET specific parameter RAM
-     */
-    unsigned long   c_pres;         /* preset CRC */
-    unsigned long   c_mask;         /* constant mask for CRC */
-    unsigned long   crcec;          /* CRC error counter */
-    unsigned long   alec;           /* alighnment error counter */
-    unsigned long   disfc;          /* discard frame counter */
-    unsigned short  pads;           /* short frame PAD characters */
-    unsigned short  ret_lim;        /* retry limit threshold */
-    unsigned short  ret_cnt;        /* retry limit counter */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  minflr;         /* minimum frame length reg */
-    unsigned short  maxd1;          /* maximum DMA1 length reg */
-    unsigned short  maxd2;          /* maximum DMA2 length reg */
-    unsigned short  maxd;           /* rx max DMA */
-    unsigned short  dma_cnt;        /* rx dma counter */
-    unsigned short  max_b;          /* max bd byte count */
-    unsigned short  gaddr1;         /* group address filter 1 */
-    unsigned short  gaddr2;         /* group address filter 2 */
-    unsigned short  gaddr3;         /* group address filter 3 */
-    unsigned short  gaddr4;         /* group address filter 4 */
-    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
-    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
-    unsigned long   tbuf0_rba0;
-    unsigned long   tbuf0_crc;
-    unsigned short  tbuf0_bcnt;
-    union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-    } paddr;
-    unsigned short  p_per;          /* persistence */
-    unsigned short  rfbd_ptr;       /* rx first bd pointer */
-    unsigned short  tfbd_ptr;       /* tx first bd pointer */
-    unsigned short  tlbd_ptr;       /* tx last bd pointer */
-    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
-    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
-    unsigned long   tbuf1_rba0;
-    unsigned long   tbuf1_crc;
-    unsigned short  tbuf1_bcnt;
-    unsigned short  tx_len;         /* tx frame length counter */
-    unsigned short  iaddr1;         /* individual address filter 1*/
-    unsigned short  iaddr2;         /* individual address filter 2*/
-    unsigned short  iaddr3;         /* individual address filter 3*/
-    unsigned short  iaddr4;         /* individual address filter 4*/
-    unsigned short  boff_cnt;       /* back-off counter */
-    unsigned short  taddr_h;        /* temp address (MSB) */
-    unsigned short  taddr_m;        /* temp address */
-    unsigned short  taddr_l;        /* temp address (LSB) */
-};
-
-struct transparent_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * TRANSPARENT specific parameter RAM
-     */
-    unsigned long   crc_p;          /* CRC Preset */
-    unsigned long   crc_c;          /* CRC constant */
-};
-
-struct timer_pram {
-    /*
-     * RISC timers parameter RAM
-     */
-    unsigned short  tm_base;        /* RISC timer table base adr */
-    unsigned short  tm_ptr;         /* RISC timer table pointer */
-    unsigned short  r_tmr;          /* RISC timer mode register */
-    unsigned short  r_tmv;          /* RISC timer valid register */
-    unsigned long   tm_cmd;         /* RISC timer cmd register */
-    unsigned long   tm_cnt;         /* RISC timer internal cnt */
-};
-
-#endif
diff --git a/include/asm-m68knommu/m68360_quicc.h b/include/asm-m68knommu/m68360_quicc.h
deleted file mode 100644
index 6d40f4d18e10..000000000000
--- a/include/asm-m68knommu/m68360_quicc.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/***********************************
- * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of QUICC memory structures
- ***************************************
- */
-
-#ifndef __M68360_QUICC_H
-#define __M68360_QUICC_H
-
-/*
- * include registers and
- * parameter ram definitions files
- */
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-
-
-
-/* Buffer Descriptors */
-typedef struct quicc_bd {
-    volatile unsigned short     status;
-    volatile unsigned short     length;
-    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
-} QUICC_BD;
-
-
-#ifdef MOTOROLA_ORIGINAL
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
-    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
-    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
-    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
-};
-#else
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
-    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
-    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
-    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
-    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
-};
-#endif
-
-
-/*
- * internal ram
- */
-typedef struct quicc {
-	union {
-		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
-		struct user_data		u;
-	}ch_or_u;	/* multipul or user space */
-
-    /* BASE + 0xc00: PARAMETER RAM */
-	union {
-		struct scc_pram {
-			union {
-				struct hdlc_pram        h;
-				struct uart_pram        u;
-				struct bisync_pram      b;
-				struct transparent_pram t;
-				unsigned char   RESERVED66[0x70];
-			} pscc;               /* scc parameter area (protocol dependent) */
-			union {
-				struct {
-					unsigned char       RESERVED70[0x10];
-					struct spi_pram     spi;
-					unsigned char       RESERVED72[0x8];
-					struct timer_pram   timer;
-				} timer_spi;
-				struct {
-					struct idma_pram idma;
-					unsigned char       RESERVED67[0x4];
-					union {
-						struct smc_uart_pram u;
-						struct smc_trnsp_pram t;
-					} psmc;
-				} idma_smc;
-			} pothers;
-		} scc;
-		struct ethernet_pram    enet_scc;
-		struct global_multi_pram        m;
-		unsigned char   pr[0x100];
-	} pram[4];
-
-    /* reserved */
-
-    /* BASE + 0x1000: INTERNAL REGISTERS */
-    /* SIM */
-    volatile unsigned long      sim_mcr;        /* module configuration reg */
-    volatile unsigned short     sim_simtr;      /* module test register     */
-    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_avr;        /* auto vector reg          */
-    volatile unsigned char      sim_rsr;        /* reset status reg         */
-    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
-    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
-    volatile unsigned short     sim_pllcr;      /* PLL control register     */
-    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
-    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
-    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
-    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
-    volatile unsigned char      sim_sypcr;      /* system protection control*/
-    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
-    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
-    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
-    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
-    volatile unsigned char      sim_swsr;       /* software service         */
-    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
-    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
-    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
-    /* MEMC */
-    volatile unsigned long      memc_gmr;       /* Global memory register   */
-    volatile unsigned short     memc_mstat;     /* MEMC status register     */
-    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
-    volatile unsigned long      memc_br0;       /* base register 0          */
-    volatile unsigned long      memc_or0;       /* option register 0        */
-    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br1;       /* base register 1          */
-    volatile unsigned long      memc_or1;       /* option register 1        */
-    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br2;       /* base register 2          */
-    volatile unsigned long      memc_or2;       /* option register 2        */
-    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br3;       /* base register 3          */
-    volatile unsigned long      memc_or3;       /* option register 3        */
-    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br4;       /* base register 3          */
-    volatile unsigned long      memc_or4;       /* option register 3        */
-    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br5;       /* base register 3          */
-    volatile unsigned long      memc_or5;       /* option register 3        */
-    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br6;       /* base register 3          */
-    volatile unsigned long      memc_or6;       /* option register 3        */
-    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br7;       /* base register 3          */
-    volatile unsigned long      memc_or7;       /* option register 3        */
-    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
-    /* TEST */
-    volatile unsigned short     test_tstmra;    /* master shift a           */
-    volatile unsigned short     test_tstmrb;    /* master shift b           */
-    volatile unsigned short     test_tstsc;     /* shift count              */
-    volatile unsigned short     test_tstrc;     /* repetition counter       */
-    volatile unsigned short     test_creg;      /* control                  */
-    volatile unsigned short     test_dreg;      /* destributed register     */
-    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
-    /* IDMA1 */
-    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
-    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
-    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
-    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
-    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma1_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED20;     /* Reserved area            */
-    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED21;     /* Reserved area            */
-    volatile unsigned char      idma1_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
-    /* SDMA */
-    volatile unsigned char      sdma_sdsr;      /* status reg               */
-    volatile unsigned char      RESERVED23;     /* Reserved area            */
-    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
-    volatile unsigned long      sdma_sdar;      /* address reg              */
-    /* IDMA2 */
-    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
-    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
-    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma2_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED24;     /* Reserved area            */
-    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED25;     /* Reserved area            */
-    volatile unsigned char      idma2_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
-    /* Interrupt Controller */
-    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
-    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
-    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
-    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
-    /* Parallel I/O */
-    volatile unsigned short     pio_padir;      /* port A data direction reg */
-    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
-    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
-    volatile unsigned short     pio_padat;      /* port A data register     */
-    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
-    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
-    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
-    volatile unsigned short     pio_pcso;       /* port C special options   */
-    volatile unsigned short     pio_pcdat;      /* port C data register     */
-    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
-    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
-    /* Timer */
-    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
-    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
-    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
-    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
-    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
-    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
-    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
-    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
-    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
-    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
-    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
-    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
-    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
-    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
-    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
-    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
-    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
-    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
-    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
-    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
-    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
-    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
-    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
-    /* CP */
-    volatile unsigned short     cp_cr;          /* command register         */
-    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rccr;        /* main configuration reg   */
-    volatile unsigned char      RESERVED37;     /* Reserved area            */
-    volatile unsigned char      cp_rmds;        /* development support status reg */
-    volatile unsigned long      cp_rmdr;        /* development support control reg */
-    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
-    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
-    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
-    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
-    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
-    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
-    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
-    /* BRG */
-    union {
-        volatile unsigned long l;
-        struct {
-            volatile unsigned short BRGC_RESERV:14;
-            volatile unsigned short rst:1;
-            volatile unsigned short en:1;
-            volatile unsigned short extc:2;
-            volatile unsigned short atb:1;
-            volatile unsigned short cd:12;
-            volatile unsigned short div16:1;
-        } b;
-    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
-    /* SCC registers */
-    struct scc_regs {
-        union {
-            struct {
-                /* Low word. */
-                volatile unsigned short GSMR_RESERV2:1;
-                volatile unsigned short edge:2;
-                volatile unsigned short tci:1;
-                volatile unsigned short tsnc:2;
-                volatile unsigned short rinv:1;
-                volatile unsigned short tinv:1;
-                volatile unsigned short tpl:3;
-                volatile unsigned short tpp:2;
-                volatile unsigned short tend:1;
-                volatile unsigned short tdcr:2;
-                volatile unsigned short rdcr:2;
-                volatile unsigned short renc:3;
-                volatile unsigned short tenc:3;
-                volatile unsigned short diag:2;
-                volatile unsigned short enr:1;
-                volatile unsigned short ent:1;
-                volatile unsigned short mode:4;
-                /* High word. */
-                volatile unsigned short GSMR_RESERV1:14;
-                volatile unsigned short pri:1;
-                volatile unsigned short gde:1;
-                volatile unsigned short tcrc:2;
-                volatile unsigned short revd:1;
-                volatile unsigned short trx:1;
-                volatile unsigned short ttx:1;
-                volatile unsigned short cdp:1;
-                volatile unsigned short ctsp:1;
-                volatile unsigned short cds:1;
-                volatile unsigned short ctss:1;
-                volatile unsigned short tfl:1;
-                volatile unsigned short rfw:1;
-                volatile unsigned short txsy:1;
-                volatile unsigned short synl:2;
-                volatile unsigned short rtsm:1;
-                volatile unsigned short rsyn:1;
-            } b;
-            struct {
-                volatile unsigned long low;
-                volatile unsigned long high;
-            } w;
-        } scc_gsmr;                         /* SCC general mode reg         */
-        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
-        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
-        volatile unsigned short scc_todr; /* SCC transmit on demand         */
-        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
-        volatile unsigned short scc_scce;       /* SCC event reg            */
-        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
-        volatile unsigned short scc_sccm;       /* SCC mask reg             */
-        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
-        volatile unsigned char  scc_sccs;       /* SCC status reg           */
-        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
-    } scc_regs[4];
-    /* SMC */
-    struct smc_regs {
-        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
-        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
-        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
-        volatile unsigned char  smc_smce;        /* SMC event reg           */
-        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
-        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
-        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
-    } smc_regs[2];
-    /* SPI */
-    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
-    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
-    volatile unsigned char      spi_spie;       /* SPI event reg            */
-    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
-    volatile unsigned char      spi_spim;       /* SPI mask reg             */
-    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
-    volatile unsigned char      spi_spcom;      /* SPI command reg          */
-    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
-    /* PIP */
-    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
-    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
-    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
-    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
-    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
-    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
-    volatile unsigned long      pip_pbdat;      /* port b data reg          */
-    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
-    /* Serial Interface */
-    volatile unsigned long      si_simode;      /* SI mode register         */
-    volatile unsigned char      si_sigmr;       /* SI global mode register  */
-    volatile unsigned char      RESERVED55;     /* Reserved area            */
-    volatile unsigned char      si_sistr;       /* SI status register       */
-    volatile unsigned char      si_sicmr;       /* SI command register      */
-    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
-    volatile unsigned long      si_sicr;        /* SI clock routing         */
-    volatile unsigned long      si_sirp;        /* SI ram pointers          */
-    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
-    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
-} QUICC;
-
-#endif
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/include/asm-m68knommu/m68360_regs.h b/include/asm-m68knommu/m68360_regs.h
deleted file mode 100644
index d57217ca4f27..000000000000
--- a/include/asm-m68knommu/m68360_regs.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/***********************************
- * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the QUICC registers
- ***************************************
- */
-
-#ifndef __REGISTERS_H
-#define __REGISTERS_H
-
-#define CLEAR_BIT(x, bit)  x =bit 
-
-/*****************************************************************
-        Command Register
-*****************************************************************/
-
-/* bit fields within command register */
-#define SOFTWARE_RESET  0x8000
-#define CMD_OPCODE      0x0f00
-#define CMD_CHANNEL     0x00f0
-#define CMD_FLAG        0x0001
-
-/* general command opcodes */
-#define INIT_RXTX_PARAMS        0x0000
-#define INIT_RX_PARAMS          0x0100
-#define INIT_TX_PARAMS          0x0200
-#define ENTER_HUNT_MODE         0x0300
-#define STOP_TX                 0x0400
-#define GR_STOP_TX              0x0500
-#define RESTART_TX              0x0600
-#define CLOSE_RX_BD             0x0700
-#define SET_ENET_GROUP          0x0800
-#define RESET_ENET_GROUP        0x0900
-
-/* quicc32 CP commands */
-#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
-#define ENTER_HUNT_MODE_32	0x1e00
-
-/* quicc32 mask/event SCC register */
-#define GOV	0x01
-#define GUN	0x02
-#define GINT	0x04
-#define IQOV	0x08
-
-
-/* Timer commands */
-#define SET_TIMER               0x0800
-
-/* Multi channel Interrupt structure */
-#define INTR_VALID	0x8000	/* Valid interrupt entry */
-#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
-#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
-#define INTR_MASK_BITS	0x383f
-
-/*
- * General SCC mode register (GSMR)
- */
-
-#define MODE_HDLC               0x0
-#define MODE_APPLE_TALK         0x2
-#define MODE_SS7                0x3
-#define MODE_UART               0x4
-#define MODE_PROFIBUS           0x5
-#define MODE_ASYNC_HDLC         0x6
-#define MODE_V14                0x7
-#define MODE_BISYNC             0x8
-#define MODE_DDCMP              0x9
-#define MODE_MULTI_CHANNEL      0xa
-#define MODE_ETHERNET           0xc
-
-#define DIAG_NORMAL             0x0
-#define DIAG_LOCAL_LPB          0x1
-#define DIAG_AUTO_ECHO          0x2
-#define DIAG_LBP_ECHO           0x3
-
-/* For RENC and TENC fields in GSMR */
-#define ENC_NRZ                 0x0
-#define ENC_NRZI                0x1
-#define ENC_FM0                 0x2
-#define ENC_MANCH               0x4
-#define ENC_DIFF_MANC           0x6
-
-/* For TDCR and RDCR fields in GSMR */
-#define CLOCK_RATE_1            0x0
-#define CLOCK_RATE_8            0x1
-#define CLOCK_RATE_16           0x2
-#define CLOCK_RATE_32           0x3
-
-#define TPP_00                  0x0
-#define TPP_10                  0x1
-#define TPP_01                  0x2
-#define TPP_11                  0x3
-
-#define TPL_NO                  0x0
-#define TPL_8                   0x1
-#define TPL_16                  0x2
-#define TPL_32                  0x3
-#define TPL_48                  0x4
-#define TPL_64                  0x5
-#define TPL_128                 0x6
-
-#define TSNC_INFINITE           0x0
-#define TSNC_14_65              0x1
-#define TSNC_4_15               0x2
-#define TSNC_3_1                0x3
-
-#define EDGE_BOTH               0x0
-#define EDGE_POS                0x1
-#define EDGE_NEG                0x2
-#define EDGE_NO                 0x3
-
-#define SYNL_NO                 0x0
-#define SYNL_4                  0x1
-#define SYNL_8                  0x2
-#define SYNL_16                 0x3
-
-#define TCRC_CCITT16            0x0
-#define TCRC_CRC16              0x1
-#define TCRC_CCITT32            0x2
-
-
-/*****************************************************************
-        TODR (Transmit on demand) Register
-*****************************************************************/
-#define TODR_TOD        0x8000  /* Transmit on demand */
-
-
-/*****************************************************************
-        CICR register settings
-*****************************************************************/
-
-/* note that relative irq priorities of the SCCs can be reordered
- * if desired - see p. 7-377 of the MC68360UM */
-#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
-#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
-#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
-#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
-
-#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
-#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
-#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
-#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
-
-
-/*****************************************************************
-       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
-*****************************************************************/
-
-#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
-#define INTR_SCC1       0x40000000      /* SCC port 1 */
-#define INTR_SCC2       0x20000000      /* SCC port 2 */
-#define INTR_SCC3       0x10000000      /* SCC port 3 */
-#define INTR_SCC4       0x08000000      /* SCC port 4 */
-#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
-#define INTR_TIMER1     0x02000000      /* timer 1 */
-#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
-#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
-#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
-#define INTR_DMA1       0x00200000      /* idma 1 */
-#define INTR_DMA2       0x00100000      /* idma 2 */
-#define INTR_TIMER2     0x00040000      /* timer 2 */
-#define INTR_CP_TIMER   0x00020000      /* CP timer */
-#define INTR_PIP_STATUS 0x00010000      /* PIP status */
-#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
-#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
-#define INTR_TIMER3     0x00001000      /* timer 3 */
-#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
-#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
-#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
-#define INTR_TIMER4     0x00000080      /* timer 4 */
-#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
-#define INTR_SCP        0x00000020      /* SCP */
-#define INTR_SMC1       0x00000010      /* SMC 1 */
-#define INTR_SMC2       0x00000008      /* SMC 2 */
-#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
-#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
-#define INTR_ERR        0x00000001      /* error */
-
-
-/*****************************************************************
-        CPM Interrupt vector encodings (MC68360UM p. 7-376)
-*****************************************************************/
-
-#define CPMVEC_NR		32
-#define CPMVEC_PIO_PC0		0x1f
-#define CPMVEC_SCC1		0x1e
-#define CPMVEC_SCC2		0x1d
-#define CPMVEC_SCC3		0x1c
-#define CPMVEC_SCC4		0x1b
-#define CPMVEC_PIO_PC1		0x1a
-#define CPMVEC_TIMER1		0x19
-#define CPMVEC_PIO_PC2		0x18
-#define CPMVEC_PIO_PC3		0x17
-#define CPMVEC_SDMA_CB_ERR	0x16
-#define CPMVEC_IDMA1		0x15
-#define CPMVEC_IDMA2		0x14
-#define CPMVEC_RESERVED3	0x13
-#define CPMVEC_TIMER2		0x12
-#define CPMVEC_RISCTIMER	0x11
-#define CPMVEC_RESERVED2	0x10
-#define CPMVEC_PIO_PC4		0x0f
-#define CPMVEC_PIO_PC5		0x0e
-#define CPMVEC_TIMER3		0x0c
-#define CPMVEC_PIO_PC6		0x0b
-#define CPMVEC_PIO_PC7		0x0a
-#define CPMVEC_PIO_PC8		0x09
-#define CPMVEC_RESERVED1	0x08
-#define CPMVEC_TIMER4		0x07
-#define CPMVEC_PIO_PC9		0x06
-#define CPMVEC_SPI		0x05
-#define CPMVEC_SMC1		0x04
-#define CPMVEC_SMC2		0x03
-#define CPMVEC_PIO_PC10		0x02
-#define CPMVEC_PIO_PC11		0x01
-#define CPMVEC_ERROR		0x00
-
-/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
-/* #define CPMVEC_SCC1		((ushort)0x1e) */
-/* #define CPMVEC_SCC2		((ushort)0x1d) */
-/* #define CPMVEC_SCC3		((ushort)0x1c) */
-/* #define CPMVEC_SCC4		((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
-/* #define CPMVEC_TIMER1		((ushort)0x19) */
-/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
-/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_RESERVED3	((ushort)0x13) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_RESERVED2	((ushort)0x10) */
-/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
-/* #define CPMVEC_RESERVED1	((ushort)0x08) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
-/* #define CPMVEC_SPI		((ushort)0x05) */
-/* #define CPMVEC_SMC1		((ushort)0x04) */
-/* #define CPMVEC_SMC2		((ushort)0x03) */
-/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
-/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
-/* #define CPMVEC_ERROR		((ushort)0x00) */
-
-
-/*****************************************************************
- *        PIO control registers
- *****************************************************************/
-
-/* Port A - See 360UM p. 7-358
- * 
- *  Note that most of these pins have alternate functions
- */
-
-
-/* The macros are nice, but there are all sorts of references to 1-indexed
- * facilities on the 68360... */
-/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
-/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
-
-#define PA_RXD1		((ushort)0x0001)
-#define PA_TXD1		((ushort)0x0002)
-#define PA_RXD2		((ushort)0x0004)
-#define PA_TXD2		((ushort)0x0008)
-#define PA_RXD3		((ushort)0x0010)
-#define PA_TXD3		((ushort)0x0020)
-#define PA_RXD4		((ushort)0x0040)
-#define PA_TXD4		((ushort)0x0080)
-
-#define PA_CLK1		((ushort)0x0100)
-#define PA_CLK2		((ushort)0x0200)
-#define PA_CLK3		((ushort)0x0400)
-#define PA_CLK4		((ushort)0x0800)
-#define PA_CLK5		((ushort)0x1000)
-#define PA_CLK6		((ushort)0x2000)
-#define PA_CLK7		((ushort)0x4000)
-#define PA_CLK8		((ushort)0x8000)
-
-
-/* Port B - See 360UM p. 7-362
- */
-
-
-/* Port C - See 360UM p. 7-365
- */
-
-#define PC_RTS1		((ushort)0x0001)
-#define PC_RTS2		((ushort)0x0002)
-#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
-#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
-
-#define PC_CTS1		((ushort)0x0010)
-#define PC_CD1		((ushort)0x0020)
-#define PC_CTS2		((ushort)0x0040)
-#define PC_CD2		((ushort)0x0080)
-#define PC_CTS3		((ushort)0x0100)
-#define PC_CD3		((ushort)0x0200)
-#define PC_CTS4		((ushort)0x0400)
-#define PC_CD4		((ushort)0x0800)
-
-
-
-/*****************************************************************
-        chip select option register
-*****************************************************************/
-#define DTACK           0xe000
-#define ADR_MASK        0x1ffc
-#define RDWR_MASK       0x0002
-#define FC_MASK         0x0001
-
-/*****************************************************************
-        tbase and rbase registers
-*****************************************************************/
-#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
-#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
-#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
-#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
-#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define INCREASE_TBD(bd,quicc,pram) {  \
-    if((bd)->status & T_W)             \
-        (bd) = TBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_TBD(bd,quicc,pram) {  \
-    if ((bd) == TBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-#define INCREASE_RBD(bd,quicc,pram) {  \
-    if((bd)->status & R_W)             \
-        (bd) = RBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_RBD(bd,quicc,pram) {  \
-    if ((bd) == RBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-
-/*****************************************************************
-        Macros for Multi channel
-*****************************************************************/
-#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
-#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
-#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
-		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
-#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
-#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
-#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
-#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
-#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-
-#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & T_W)                        \
-        (bd) = TBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & R_W)                        \
-        (bd) = RBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-
-#endif
diff --git a/include/asm-m68knommu/machdep.h b/include/asm-m68knommu/machdep.h
deleted file mode 100644
index de9f47a51cc2..000000000000
--- a/include/asm-m68knommu/machdep.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _M68KNOMMU_MACHDEP_H
-#define _M68KNOMMU_MACHDEP_H
-
-#include <linux/interrupt.h>
-
-/* Hardware clock functions */
-extern void hw_timer_init(void);
-extern unsigned long hw_timer_offset(void);
-
-extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
-
-/* Machine dependent time handling */
-extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
-			   int *min, int *sec);
-extern int (*mach_set_clock_mmss)(unsigned long);
-
-/* machine dependent power off functions */
-extern void (*mach_reset)( void );
-extern void (*mach_halt)( void );
-extern void (*mach_power_off)( void );
-
-extern void config_BSP(char *command, int len);
-
-extern void do_IRQ(int irq, struct pt_regs *fp);
-
-#endif /* _M68KNOMMU_MACHDEP_H */
diff --git a/include/asm-m68knommu/math-emu.h b/include/asm-m68knommu/math-emu.h
deleted file mode 100644
index 7e7090517b72..000000000000
--- a/include/asm-m68knommu/math-emu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/math-emu.h>
diff --git a/include/asm-m68knommu/mc146818rtc.h b/include/asm-m68knommu/mc146818rtc.h
deleted file mode 100644
index 907a0481a140..000000000000
--- a/include/asm-m68knommu/mc146818rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _M68KNOMMU_MC146818RTC_H
-#define _M68KNOMMU_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _M68KNOMMU_MC146818RTC_H */
diff --git a/include/asm-m68knommu/mcfcache.h b/include/asm-m68knommu/mcfcache.h
deleted file mode 100644
index c042634fadaa..000000000000
--- a/include/asm-m68knommu/mcfcache.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfcache.h -- ColdFire CPU cache support code
- *
- *	(C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef	__M68KNOMMU_MCFCACHE_H
-#define	__M68KNOMMU_MCFCACHE_H
-/****************************************************************************/
-
-
-/*
- *	The different ColdFire families have different cache arrangments.
- *	Everything from a small instruction only cache, to configurable
- *	data and/or instruction cache, to unified instruction/data, to 
- *	harvard style separate instruction and data caches.
- */
-
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-/*
- *	Simple version 2 core cache. These have instruction cache only,
- *	we just need to invalidate it and enable it.
- */
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate cache cmd */
-	movec	%d0,%CACR		/* do invalidate cache */
-	movel	#0x80000100,%d0		/* setup cache mask */
-	movec	%d0,%CACR		/* enable cache */
-.endm
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
-/*
- *	New version 2 cores have a configurable split cache arrangement.
- *	For now I am just enabling instruction cache - but ultimately I
- *	think a split instruction/data cache would be better.
- */
-.macro CACHE_ENABLE
-	movel	#0x01400000,%d0
-	movec	%d0,%CACR		/* invalidate cache */
-	nop
-	movel	#0x0000c000,%d0		/* set SDRAM cached only */
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0x80400100,%d0		/* configure cache */
-	movec	%d0,%CACR		/* enable cache */
-	nop
-.endm
-#endif /* CONFIG_M523x || CONFIG_M527x */
-
-#if defined(CONFIG_M528x)
-.macro CACHE_ENABLE
-	nop
-	movel	#0x01000000, %d0
-	movec	%d0, %CACR		/* Invalidate cache */
-	nop
-	movel	#0x0000c020, %d0	/* Set SDRAM cached only */
-	movec	%d0, %ACR0
-	movel	#0x00000000, %d0	/* No other regions cached */
-	movec	%d0, %ACR1
-	movel	#0x80000200, %d0	/* Setup cache mask */
-	movec	%d0, %CACR		/* Enable cache */
-	nop
-.endm
-#endif /* CONFIG_M528x */
-
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
-/*
- *	The version 3 core cache. Oddly enough the version 2 core 5249
- *	has the same SDRAM and cache setup as the version 3 cores.
- *	This is a single unified instruction/data cache.
- */
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
-	movel	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
-#else
-	movel	#0x0000c020,%d0		/* set SDRAM cached (copyback) */
-#endif
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0xa0000200,%d0		/* enable cache */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M5249 || CONFIG_M5307 */
-
-#if defined(CONFIG_M532x)
-.macro CACHE_ENABLE
-	movel	#0x01000000,%d0		/* invalidate cache cmd */
-	movec	%d0,%CACR		/* do invalidate cache */
-	nop
-	movel	#0x4001C000,%d0		/* set SDRAM cached (write-thru) */
-	movec	%d0,%ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	movel	#0x80000200,%d0		/* setup cache mask */
-	movec	%d0,%CACR		/* enable cache */
-	nop
-.endm
-#endif /* CONFIG_M532x */
-
-#if defined(CONFIG_M5407)
-/*
- *	Version 4 cores have a true harvard style separate instruction
- *	and data cache. Invalidate and enable cache, also enable write
- *	buffers and branch accelerator.
- */
-.macro CACHE_ENABLE
-	movel	#0x01040100,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-	movel	#0x000fc000,%d0		/* set SDRAM cached only */
-	movec	%d0, %ACR0
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0, %ACR1
-	movel	#0x000fc000,%d0		/* set SDRAM cached only */
-	movec	%d0, %ACR2
-	movel	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0, %ACR3
-	movel	#0xb6088400,%d0		/* enable caches */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M5407 */
-
-#if defined(CONFIG_M520x)
-.macro CACHE_ENABLE
-	move.l	#0x01000000,%d0		/* invalidate whole cache */
-	movec	%d0,%CACR
-	nop
-	move.l	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
-	movec	%d0,%ACR0
-	move.l	#0x00000000,%d0		/* no other regions cached */
-	movec	%d0,%ACR1
-	move.l	#0x80400000,%d0		/* enable 8K instruction cache */
-	movec	%d0,%CACR
-	nop
-.endm
-#endif /* CONFIG_M520x */
-
-/****************************************************************************/
-#endif	/* __M68KNOMMU_MCFCACHE_H */
diff --git a/include/asm-m68knommu/mcfdma.h b/include/asm-m68knommu/mcfdma.h
deleted file mode 100644
index 705c52c79cd8..000000000000
--- a/include/asm-m68knommu/mcfdma.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfdma.h -- Coldfire internal DMA support defines.
- *
- *	(C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
- */
-
-/****************************************************************************/
-#ifndef	mcfdma_h
-#define	mcfdma_h
-/****************************************************************************/
-
-
-/*
- *	Get address specific defines for this Coldfire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define	MCFDMA_BASE0		0x200		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x240		/* Base address of DMA 1 */
-#elif defined(CONFIG_M5272)
-#define	MCFDMA_BASE0		0x0e0		/* Base address of DMA 0 */
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-/* These are relative to the IPSBAR, not MBAR */
-#define	MCFDMA_BASE0		0x100		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x140		/* Base address of DMA 1 */
-#define	MCFDMA_BASE2		0x180		/* Base address of DMA 2 */
-#define	MCFDMA_BASE3		0x1C0		/* Base address of DMA 3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define	MCFDMA_BASE0		0x300		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x340		/* Base address of DMA 1 */
-#define	MCFDMA_BASE2		0x380		/* Base address of DMA 2 */
-#define	MCFDMA_BASE3		0x3C0		/* Base address of DMA 3 */
-#endif
-
-
-#if !defined(CONFIG_M5272)
-
-/*
- *	Define the DMA register set addresses.
- *      Note: these are longword registers, use unsigned long as data type
- */
-#define	MCFDMA_SAR		0x00		/* DMA source address (r/w) */
-#define	MCFDMA_DAR		0x01		/* DMA destination adr (r/w) */
-/* these are word registers, use unsigned short data type */
-#define	MCFDMA_DCR		0x04		/* DMA control reg (r/w) */
-#define	MCFDMA_BCR		0x06		/* DMA byte count reg (r/w) */
-/* these are byte registers, use unsiged char data type */
-#define	MCFDMA_DSR		0x10		/* DMA status reg (r/w) */
-#define	MCFDMA_DIVR		0x14		/* DMA interrupt vec (r/w) */
-
-/*
- *	Bit definitions for the DMA Control Register (DCR).
- */
-#define	MCFDMA_DCR_INT	        0x8000		/* Enable completion irq */
-#define	MCFDMA_DCR_EEXT	        0x4000		/* Enable external DMA req */
-#define	MCFDMA_DCR_CS 	        0x2000		/* Enable cycle steal */
-#define	MCFDMA_DCR_AA   	0x1000		/* Enable auto alignment */
-#define	MCFDMA_DCR_BWC_MASK  	0x0E00		/* Bandwidth ctl mask */
-#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
-#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
-#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
-#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
-#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
-#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
-#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
-#define	MCFDMA_DCR_SAA         	0x0100		/* Single Address Access */
-#define	MCFDMA_DCR_S_RW        	0x0080		/* SAA read/write value */
-#define	MCFDMA_DCR_SINC        	0x0040		/* Source addr inc enable */
-#define	MCFDMA_DCR_SSIZE_MASK  	0x0030		/* Src xfer size */
-#define	MCFDMA_DCR_SSIZE_LONG  	0x0000		/* Src xfer size, 00 = longw */
-#define	MCFDMA_DCR_SSIZE_BYTE  	0x0010		/* Src xfer size, 01 = byte */
-#define	MCFDMA_DCR_SSIZE_WORD  	0x0020		/* Src xfer size, 10 = word */
-#define	MCFDMA_DCR_SSIZE_LINE  	0x0030		/* Src xfer size, 11 = line */
-#define	MCFDMA_DCR_DINC        	0x0008		/* Dest addr inc enable */
-#define	MCFDMA_DCR_DSIZE_MASK  	0x0006		/* Dest xfer size */
-#define	MCFDMA_DCR_DSIZE_LONG  	0x0000		/* Dest xfer size, 00 = long */
-#define	MCFDMA_DCR_DSIZE_BYTE  	0x0002		/* Dest xfer size, 01 = byte */
-#define	MCFDMA_DCR_DSIZE_WORD  	0x0004		/* Dest xfer size, 10 = word */
-#define	MCFDMA_DCR_DSIZE_LINE  	0x0006		/* Dest xfer size, 11 = line */
-#define	MCFDMA_DCR_START       	0x0001		/* Start transfer */
-
-/*
- *	Bit definitions for the DMA Status Register (DSR).
- */
-#define	MCFDMA_DSR_CE	        0x40		/* Config error */
-#define	MCFDMA_DSR_BES	        0x20		/* Bus Error on source */
-#define	MCFDMA_DSR_BED 	        0x10		/* Bus Error on dest */
-#define	MCFDMA_DSR_REQ   	0x04		/* Requests remaining */
-#define	MCFDMA_DSR_BSY  	0x02		/* Busy */
-#define	MCFDMA_DSR_DONE        	0x01		/* DMA transfer complete */
-
-#else /* This is an MCF5272 */
-
-#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
-#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
-#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
-#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
-#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
-
-/* Bit definitions for the DMA Mode Register (DMR) */
-#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
-#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
-#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
-#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
-#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
-#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
-#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
-#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
-#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
-#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
-#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
-#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
-#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
-#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
-#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
-#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
-#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
-#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
-#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
-#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
-#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
-#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
-#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
-#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
-#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
-#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
-#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
-#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
-
-/* Bit definitions for the DMA interrupt register (DIR) */
-#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
-#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
-#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
-#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
-#define MCFDMA_DIR_INV       0x0010 /* Invalid Combination */
-#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
-#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
-#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
-
-#endif /* !defined(CONFIG_M5272) */ 
-
-/****************************************************************************/
-#endif	/* mcfdma_h */
diff --git a/include/asm-m68knommu/mcfmbus.h b/include/asm-m68knommu/mcfmbus.h
deleted file mode 100644
index 319899c47a2c..000000000000
--- a/include/asm-m68knommu/mcfmbus.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/****************************************************************************/
-
-/*
- *      mcfmbus.h -- Coldfire MBUS support defines.
- *
- *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
- */
-
-/****************************************************************************/
-
-
-#ifndef mcfmbus_h
-#define mcfmbus_h
-
-
-#define MCFMBUS_BASE		0x280
-#define MCFMBUS_IRQ_VECTOR	0x19
-#define MCFMBUS_IRQ		0x1
-#define MCFMBUS_CLK		0x3f
-#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
-#define MCFMBUS_ADDRESS		0x01
-
-
-/*
-*	Define the 5307 MBUS register set addresses
-*/
-
-#define MCFMBUS_MADR	0x00
-#define MCFMBUS_MFDR	0x04
-#define MCFMBUS_MBCR	0x08
-#define MCFMBUS_MBSR	0x0C
-#define MCFMBUS_MBDR	0x10
-
-
-#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
-
-#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
-
-/*
-*	Define bit flags in Control Register
-*/
-
-#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
-#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
-#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
-#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
-#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
-#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
-
-/*
-*	Define bit flags in Status Register
-*/
-
-#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
-#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
-#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
-#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
-#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
-#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
-#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
-
-/*
-*	Define bit flags in DATA I/O Register
-*/
-
-#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
-
-#define MBUSIOCSCLOCK		1
-#define MBUSIOCGCLOCK		2
-#define MBUSIOCSADDR			3
-#define MBUSIOCGADDR			4
-#define MBUSIOCSSLADDR			5
-#define MBUSIOCGSLADDR			6
-#define MBUSIOCSSUBADDR			7
-#define MBUSIOCGSUBADDR			8
-
-#endif
diff --git a/include/asm-m68knommu/mcfne.h b/include/asm-m68knommu/mcfne.h
deleted file mode 100644
index 431f63aadd0e..000000000000
--- a/include/asm-m68knommu/mcfne.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfne.h -- NE2000 in ColdFire eval boards.
- *
- *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000,      Lineo (www.lineo.com)
- *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
- *
- *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
- *
- *      Hacked support for m5206e Cadre III evaluation board
- *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
- */
-
-/****************************************************************************/
-#ifndef	mcfne_h
-#define	mcfne_h
-/****************************************************************************/
-
-
-/*
- *	Support for NE2000 clones devices in ColdFire based boards.
- *	Not all boards address these parts the same way, some use a
- *	direct addressing method, others use a side-band address space
- *	to access odd address registers, some require byte swapping
- *	others do not.
- */
-#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
-#define	RSWAP(w)	(w)
-
-
-/*
- *	Define the basic hardware resources of NE2000 boards.
- */
-
-#if defined(CONFIG_ARN5206)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0xf0
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206eC3)
-#define	NE2000_ADDR		0x40000300
-#define	NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0x1c
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30000300
-#define NE2000_IRQ_VECTOR	25
-#define NE2000_IRQ_PRIORITY	1
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned char
-#endif
-
-#if defined(CONFIG_M5307C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	67
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
-#define NE2000_ADDR0		0x30600300
-#define NE2000_ADDR1		0x30800300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR0	27
-#define NE2000_IRQ_VECTOR1	29
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	27
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_ARN5307)
-#define NE2000_ADDR		0xfe600300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define NE2000_IRQ_PRIORITY	2
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5407C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-/****************************************************************************/
-
-/*
- *	Side-band address space for odd address requires re-mapping
- *	many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define	outb	ne2000_outb
-#define	inb	ne2000_inb
-#define	outb_p	ne2000_outb
-#define	inb_p	ne2000_inb
-#define	outsb	ne2000_outsb
-#define	outsw	ne2000_outsw
-#define	insb	ne2000_insb
-#define	insw	ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int  ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- *	This macro converts a conventional register address into the
- *	real memory pointer of the mapped NE2000 device.
- *	On most NE2000 implementations on ColdFire boards the chip is
- *	mapped in kinda funny, due to its ISA heritage.
- */
-#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define	NE2000_DATA_PTR(addr)	(addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
-	NE2000_BYTE	*rp;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	*rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
-	NE2000_BYTE	*rp, val;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	val = *rp;
-	return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *rp;
-		*buf++ = RSWAP(val);
-	}
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *rp;
-		*buf++ = BSWAP(w);
-	}
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *buf++;
-		*rp = RSWAP(val);
-	}
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *buf++;
-		*rp = BSWAP(w);
-	}
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- *	Lastly the interrupt set up code...
- *	Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned long	*icrp;
-	volatile unsigned long	*pitr;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77077777) | 0x00d00000;
-
-	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
-	*pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
-	volatile unsigned long	*icrp;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-	mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
-/****************************************************************************/
-#endif	/* mcfne_h */
diff --git a/include/asm-m68knommu/mcfpci.h b/include/asm-m68knommu/mcfpci.h
deleted file mode 100644
index f1507dd06ec6..000000000000
--- a/include/asm-m68knommu/mcfpci.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfpci.h -- PCI bridge on ColdFire eval boards.
- *
- *	(C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	mcfpci_h
-#define	mcfpci_h
-/****************************************************************************/
-
-
-#ifdef CONFIG_PCI
-
-/*
- *	Address regions in the PCI address space are not mapped into the
- *	normal memory space of the ColdFire. They must be accessed via
- *	handler routines. This is easy for I/O space (inb/outb/etc) but
- *	needs some code changes to support ordinary memory. Interrupts
- *	also need to be vectored through the PCI handler first, then it
- *	will call the actual driver sub-handlers.
- */
-
-/*
- *	Un-define all the standard I/O access routines.
- */
-#undef	inb
-#undef	inw
-#undef	inl
-#undef	inb_p
-#undef	inw_p
-#undef	insb
-#undef	insw
-#undef	insl
-#undef	outb
-#undef	outw
-#undef	outl
-#undef	outb_p
-#undef	outw_p
-#undef	outsb
-#undef	outsw
-#undef	outsl
-
-#undef	request_irq
-#undef	free_irq
-
-#undef	bus_to_virt
-#undef	virt_to_bus
-
-
-/*
- *	Re-direct all I/O memory accesses functions to PCI specific ones.
- */
-#define	inb	pci_inb
-#define	inw	pci_inw
-#define	inl	pci_inl
-#define	inb_p	pci_inb
-#define	inw_p	pci_inw
-#define	insb	pci_insb
-#define	insw	pci_insw
-#define	insl	pci_insl
-
-#define	outb	pci_outb
-#define	outw	pci_outw
-#define	outl	pci_outl
-#define	outb_p	pci_outb
-#define	outw_p	pci_outw
-#define	outsb	pci_outsb
-#define	outsw	pci_outsw
-#define	outsl	pci_outsl
-
-#define	request_irq	pci_request_irq
-#define	free_irq	pci_free_irq
-
-#define	virt_to_bus	pci_virt_to_bus
-#define	bus_to_virt	pci_bus_to_virt
-
-#define	CONFIG_COMEMPCI	1
-
-
-/*
- *	Prototypes of the real PCI functions (defined in bios32.c).
- */
-unsigned char	pci_inb(unsigned int addr);
-unsigned short	pci_inw(unsigned int addr);
-unsigned int	pci_inl(unsigned int addr);
-void		pci_insb(void *addr, void *buf, int len);
-void		pci_insw(void *addr, void *buf, int len);
-void		pci_insl(void *addr, void *buf, int len);
-
-void		pci_outb(unsigned char val, unsigned int addr);
-void		pci_outw(unsigned short val, unsigned int addr);
-void		pci_outl(unsigned int val, unsigned int addr);
-void		pci_outsb(void *addr, void *buf, int len);
-void		pci_outsw(void *addr, void *buf, int len);
-void		pci_outsl(void *addr, void *buf, int len);
-
-int		pci_request_irq(unsigned int irq,
-			void (*handler)(int, void *, struct pt_regs *),
-			unsigned long flags,
-			const char *device,
-			void *dev_id);
-void		pci_free_irq(unsigned int irq, void *dev_id);
-
-void		*pci_bmalloc(int size);
-void		pci_bmfree(void *bmp, int len);
-void		pci_copytoshmem(unsigned long bmp, void *src, int size);
-void		pci_copyfromshmem(void *dst, unsigned long bmp, int size);
-unsigned long	pci_virt_to_bus(volatile void *address);
-void		*pci_bus_to_virt(unsigned long address);
-void		pci_bmcpyto(void *dst, void *src, int len);
-void		pci_bmcpyfrom(void *dst, void *src, int len);
-
-#endif /* CONFIG_PCI */
-/****************************************************************************/
-#endif	/* mcfpci_h */
diff --git a/include/asm-m68knommu/mcfpit.h b/include/asm-m68knommu/mcfpit.h
deleted file mode 100644
index f570cf64fd29..000000000000
--- a/include/asm-m68knommu/mcfpit.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfpit.h -- ColdFire internal PIT timer support defines.
- *
- *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	mcfpit_h
-#define	mcfpit_h
-/****************************************************************************/
-
-
-/*
- *	Get address specific defines for the 5270/5271, 5280/5282, and 5208.
- */
-#if defined(CONFIG_M520x)
-#define	MCFPIT_BASE1		0x00080000	/* Base address of TIMER1 */
-#define	MCFPIT_BASE2		0x00084000	/* Base address of TIMER2 */
-#else
-#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */
-#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */
-#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */
-#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */
-#endif
-
-/*
- *	Define the PIT timer register set addresses.
- */
-#define	MCFPIT_PCSR		0x0		/* PIT control register */
-#define	MCFPIT_PMR		0x2		/* PIT modulus register */
-#define	MCFPIT_PCNTR		0x4		/* PIT count register */
-
-/*
- *	Bit definitions for the PIT Control and Status register.
- */
-#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */
-#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */
-#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */
-#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */
-#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */
-#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */
-#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */
-#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */
-#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */
-#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT */
-
-/****************************************************************************/
-#endif	/* mcfpit_h */
diff --git a/include/asm-m68knommu/mcfsim.h b/include/asm-m68knommu/mcfsim.h
deleted file mode 100644
index da3f2ceff3a4..000000000000
--- a/include/asm-m68knommu/mcfsim.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfsim.h -- ColdFire System Integration Module support.
- *
- *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfsim_h
-#define	mcfsim_h
-/****************************************************************************/
-
-
-/*
- *	Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
- *	5307 or 5407 specific addresses.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#include <asm/m5206sim.h>
-#elif defined(CONFIG_M520x)
-#include <asm/m520xsim.h>
-#elif defined(CONFIG_M523x)
-#include <asm/m523xsim.h>
-#elif defined(CONFIG_M5249)
-#include <asm/m5249sim.h>
-#elif defined(CONFIG_M527x)
-#include <asm/m527xsim.h>
-#elif defined(CONFIG_M5272)
-#include <asm/m5272sim.h>
-#elif defined(CONFIG_M528x)
-#include <asm/m528xsim.h>
-#elif defined(CONFIG_M5307)
-#include <asm/m5307sim.h>
-#elif defined(CONFIG_M532x)
-#include <asm/m532xsim.h>
-#elif defined(CONFIG_M5407)
-#include <asm/m5407sim.h>
-#endif
-
-
-/*
- *	Define the base address of the SIM within the MBAR address space.
- */
-#define	MCFSIM_BASE		0x0		/* Base address of SIM */
-
-
-/*
- *	Bit definitions for the ICR family of registers.
- */
-#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
-#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
-#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
-#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
-#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
-#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
-#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
-#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
-#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
-
-#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
-#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
-#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
-#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
-
-/*
- *	Bit definitions for the Interrupt Mask register (IMR).
- */
-#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
-#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
-#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
-#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
-#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
-#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
-#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
-
-#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
-#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
-#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
-#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
-#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
-#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
-#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
-#endif
-
-/*
- *	Mask for all of the SIM devices. Some parts have more or less
- *	SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
-#endif
-
-
-/*
- *	PIT interrupt settings, if not found in mXXXXsim.h file.
- */
-#ifndef	ICR_INTRCONF
-#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
-#endif
-#ifndef	MCFPIT_IMR
-#define	MCFPIT_IMR		MCFINTC_IMRH
-#endif
-#ifndef	MCFPIT_IMR_IBIT
-#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
-#endif
-
-
-#ifndef __ASSEMBLY__
-/*
- *	Definition for the interrupt auto-vectoring support.
- */
-extern void	mcf_autovector(unsigned int vec);
-#endif /* __ASSEMBLY__ */
-
-/****************************************************************************/
-#endif	/* mcfsim_h */
diff --git a/include/asm-m68knommu/mcfsmc.h b/include/asm-m68knommu/mcfsmc.h
deleted file mode 100644
index 2d7a4dbd9683..000000000000
--- a/include/asm-m68knommu/mcfsmc.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
- *
- *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfsmc_h
-#define	mcfsmc_h
-/****************************************************************************/
-
-/*
- *	None of the current ColdFire targets that use the SMC91x111
- *	allow 8 bit accesses. So this code is 16bit access only.
- */
-
-
-#undef	outb
-#undef	inb
-#undef	outw
-#undef	outwd
-#undef	inw	
-#undef	outl
-#undef	inl
-
-#undef	outsb
-#undef	outsw
-#undef	outsl
-#undef	insb
-#undef	insw
-#undef	insl
-
-/*
- *	Re-defines for ColdFire environment... The SMC part is
- *	mapped into memory space, so remap the PC-style in/out
- *	routines to handle that.
- */
-#define	outb	smc_outb
-#define	inb	smc_inb
-#define	outw	smc_outw
-#define	outwd	smc_outwd
-#define	inw	smc_inw
-#define	outl	smc_outl
-#define	inl	smc_inl
-
-#define	outsb	smc_outsb
-#define	outsw	smc_outsw
-#define	outsl	smc_outsl
-#define	insb	smc_insb
-#define	insw	smc_insw
-#define	insl	smc_insl
-
-
-static inline int smc_inb(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) (addr & ~0x1));
-	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
-}
-
-static inline void smc_outw(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
-}
-
-static inline int smc_inw(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) addr);
-	return(((w << 8) | (w >> 8)) & 0xffff);
-}
-
-static inline void smc_outl(unsigned long val, unsigned int addr)
-{
-	*((volatile unsigned long *) addr) = 
-		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
-		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
-}
-
-static inline void smc_outwd(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = val;
-}
-
-
-/*
- *	The rep* functions are used to feed the data port with
- *	raw data. So we do not byte swap them when copying.
- */
-
-static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-
-	/* Copy as words for as long as possible */
-	for (ebuf = buf + (len >> 1); (buf < ebuf); )
-		*buf++ = *rp;
-
-	/* Lastly, handle left over byte */
-	if (len & 0x1)
-		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
-}
-
-static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-
-#ifdef CONFIG_NETtel
-/*
- *	Re-map the address space of at least one of the SMC ethernet
- *	parts. Both parts power up decoding the same address, so we
- *	need to move one of them first, before doing enything else.
- *
- *	We also increase the number of wait states for this part by one.
- */
-
-void smc_remap(unsigned int ioaddr)
-{
-	static int		once = 0;
-	extern unsigned short	ppdata;
-	if (once++ == 0) {
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
-		ppdata |= 0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0067, ioaddr + BASE);
-
-		ppdata &= ~0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
-	}
-	
-	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
-}
-
-#endif
-
-/****************************************************************************/
-#endif	/* mcfsmc_h */
diff --git a/include/asm-m68knommu/mcftimer.h b/include/asm-m68knommu/mcftimer.h
deleted file mode 100644
index 0f90f6d2227a..000000000000
--- a/include/asm-m68knommu/mcftimer.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcftimer.h -- ColdFire internal TIMER support defines.
- *
- *	(C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcftimer_h
-#define	mcftimer_h
-/****************************************************************************/
-
-
-/*
- *	Get address specific defines for this ColdFire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define	MCFTIMER_BASE1		0x100		/* Base address of TIMER1 */
-#define	MCFTIMER_BASE2		0x120		/* Base address of TIMER2 */
-#elif defined(CONFIG_M5272)
-#define MCFTIMER_BASE1		0x200           /* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0x220           /* Base address of TIMER2 */
-#define MCFTIMER_BASE3		0x240           /* Base address of TIMER4 */
-#define MCFTIMER_BASE4		0x260           /* Base address of TIMER3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define MCFTIMER_BASE1		0x140           /* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0x180           /* Base address of TIMER2 */
-#elif defined(CONFIG_M532x)
-#define MCFTIMER_BASE1		0xfc070000	/* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0xfc074000	/* Base address of TIMER2 */
-#define MCFTIMER_BASE3		0xfc078000	/* Base address of TIMER3 */
-#define MCFTIMER_BASE4		0xfc07c000	/* Base address of TIMER4 */
-#endif
-
-
-/*
- *	Define the TIMER register set addresses.
- */
-#define	MCFTIMER_TMR		0x00		/* Timer Mode reg (r/w) */
-#define	MCFTIMER_TRR		0x04		/* Timer Reference (r/w) */
-#define	MCFTIMER_TCR		0x08		/* Timer Capture reg (r/w) */
-#define	MCFTIMER_TCN		0x0C		/* Timer Counter reg (r/w) */
-#if defined(CONFIG_M532x)
-#define	MCFTIMER_TER		0x03		/* Timer Event reg (r/w) */
-#else
-#define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
-#endif
-
-/*
- *	Bit definitions for the Timer Mode Register (TMR).
- *	Register bit flags are common accross ColdFires.
- */
-#define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
-#define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
-#define	MCFTIMER_TMR_ANYCE	0x00c0		/* Capture any edge */
-#define	MCFTIMER_TMR_FALLCE	0x0080		/* Capture fallingedge */
-#define	MCFTIMER_TMR_RISECE	0x0040		/* Capture rising edge */
-#define	MCFTIMER_TMR_ENOM	0x0020		/* Enable output toggle */
-#define	MCFTIMER_TMR_DISOM	0x0000		/* Do single output pulse  */
-#define	MCFTIMER_TMR_ENORI	0x0010		/* Enable ref interrupt */
-#define	MCFTIMER_TMR_DISORI	0x0000		/* Disable ref interrupt */
-#define	MCFTIMER_TMR_RESTART	0x0008		/* Restart counter */
-#define	MCFTIMER_TMR_FREERUN	0x0000		/* Free running counter */
-#define	MCFTIMER_TMR_CLKTIN	0x0006		/* Input clock is TIN */
-#define	MCFTIMER_TMR_CLK16	0x0004		/* Input clock is /16 */
-#define	MCFTIMER_TMR_CLK1	0x0002		/* Input clock is /1 */
-#define	MCFTIMER_TMR_CLKSTOP	0x0000		/* Stop counter */
-#define	MCFTIMER_TMR_ENABLE	0x0001		/* Enable timer */
-#define	MCFTIMER_TMR_DISABLE	0x0000		/* Disable timer */
-
-/*
- *	Bit definitions for the Timer Event Registers (TER).
- */
-#define	MCFTIMER_TER_CAP	0x01		/* Capture event */
-#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
-
-/****************************************************************************/
-#endif	/* mcftimer_h */
diff --git a/include/asm-m68knommu/mcfuart.h b/include/asm-m68knommu/mcfuart.h
deleted file mode 100644
index ef2293873612..000000000000
--- a/include/asm-m68knommu/mcfuart.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfuart.h -- ColdFire internal UART support defines.
- *
- *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfuart_h
-#define	mcfuart_h
-/****************************************************************************/
-
-/*
- *	Define the base address of the UARTS within the MBAR address
- *	space.
- */
-#if defined(CONFIG_M5272)
-#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
-#else
-#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x240           /* Base address of UART2 */
-#define MCFUART_BASE3		0x280           /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
-#else
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1		0x60000		/* Base address of UART1 */
-#define MCFUART_BASE2		0x64000		/* Base address of UART2 */
-#define MCFUART_BASE3		0x68000		/* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
-#define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
-#define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
-#endif
-
-
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-struct mcf_platform_uart {
-	unsigned long	mapbase;	/* Physical address base */
-	void __iomem	*membase;	/* Virtual address if mapped */
-	unsigned int	irq;		/* Interrupt vector */
-	unsigned int	uartclk;	/* UART clock rate */
-};
-
-/*
- *	Define the ColdFire UART register set addresses.
- */
-#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
-#define	MCFUART_USR		0x04		/* Status register (r) */
-#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
-#define	MCFUART_UCR		0x08		/* Command register (w) */
-#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
-#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
-#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
-#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
-#define	MCFUART_UISR		0x14		/* Interrupt Status (r) */
-#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
-#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
-#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
-#ifdef	CONFIG_M5272
-#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
-#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
-#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
-#else
-#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
-#endif
-#define	MCFUART_UIPR		0x34		/* Input Port (r) */
-#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
-#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
-
-
-/*
- *	Define bit flags in Mode Register 1 (MR1).
- */
-#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
-#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
-#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
-#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
-#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
-
-#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
-#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
-#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
-#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
-#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
-
-#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
-#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
-#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
-#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
-
-/*
- *	Define bit flags in Mode Register 2 (MR2).
- */
-#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
-#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
-#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
-#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
-#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
-
-#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
-#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
-#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
-
-/*
- *	Define bit flags in Status Register (USR).
- */
-#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
-#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
-#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
-#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
-#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
-#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
-#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
-#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
-
-#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
-				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
-
-/*
- *	Define bit flags in Clock Select Register (UCSR).
- */
-#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
-#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
-#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
-
-#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
-#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
-#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
-
-/*
- *	Define bit flags in Command Register (UCR).
- */
-#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
-#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
-#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
-#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
-#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
-#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
-#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
-#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
-
-#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
-#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
-#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
-#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
-#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
-#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
-
-/*
- *	Define bit flags in Input Port Change Register (UIPCR).
- */
-#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
-#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
-
-/*
- *	Define bit flags in Input Port Register (UIP).
- */
-#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
-
-/*
- *	Define bit flags in Output Port Registers (UOP).
- *	Clear bit by writing to UOP0, set by writing to UOP1.
- */
-#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
-
-/*
- *	Define bit flags in the Auxiliary Control Register (UACR).
- */
-#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
-
-/*
- *	Define bit flags in Interrupt Status Register (UISR).
- *	These same bits are used for the Interrupt Mask Register (UIMR).
- */
-#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
-#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
-#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
-#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
-
-#ifdef	CONFIG_M5272
-/*
- *	Define bit flags in the Transmitter FIFO Register (UTF).
- */
-#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
-#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
-#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
-
-/*
- *	Define bit flags in the Receiver FIFO Register (URF).
- */
-#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
-#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
-#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
-#endif
-
-/****************************************************************************/
-#endif	/* mcfuart_h */
diff --git a/include/asm-m68knommu/mcfwdebug.h b/include/asm-m68knommu/mcfwdebug.h
deleted file mode 100644
index 27f70e45d700..000000000000
--- a/include/asm-m68knommu/mcfwdebug.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfdebug.h -- ColdFire Debug Module support.
- *
- * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef mcfdebug_h
-#define mcfdebug_h
-/****************************************************************************/
-
-/* Define the debug module registers */
-#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
-#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
-#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
-#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
-#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
-#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
-#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
-#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
-#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
-#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
-
-/* Define some handy constants for the trigger definition register */
-#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
-#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
-#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
-#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
-#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
-#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
-#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
-#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
-#define MCFDEBUG_TDR_EDLW2	0x10000000
-#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
-#define MCFDEBUG_TDR_EDWL2	0x08000000
-#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
-#define MCFDEBUG_TDR_EDWU2	0x04000000
-#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
-#define MCFDEBUG_TDR_EDLL2	0x02000000
-#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
-#define MCFDEBUG_TDR_EDLM2	0x01000000
-#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
-#define MCFDEBUG_TDR_EDUM2	0x00800000
-#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
-#define MCFDEBUG_TDR_EDUU2	0x00400000
-#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
-#define MCFDEBUG_TDR_DI2	0x00200000
-#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
-#define MCFDEBUG_TDR_EAI2	0x00100000
-#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
-#define MCFDEBUG_TDR_EAR2	0x00080000
-#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
-#define MCFDEBUG_TDR_EAL2	0x00040000
-#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
-#define MCFDEBUG_TDR_EPC2	0x00020000
-#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
-#define MCFDEBUG_TDR_PCI2	0x00010000
-
-/* Constants for the address attribute trigger register */
-#define MCFDEBUG_AAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-/* And some definitions for the writable sections of the CSR */
-#define MCFDEBUG_CSR_RESET	0x00100000
-#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
-#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
-#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
-#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
-#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
-#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
-#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
-#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
-#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
-#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
-#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
-#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
-#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
-#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
-
-/* Constants for the BDM address attribute register */
-#define MCFDEBUG_BAAR_RESET	0x00000005
-/* Fields not yet implemented */
-
-
-/* This routine wrappers up the wdebug asm instruction so that the register
- * and value can be relatively easily specified.  The biggest hassle here is
- * that the debug module instructions (2 longs) must be long word aligned and
- * some pointer fiddling is performed to ensure this.
- */
-static inline void wdebug(int reg, unsigned long data) {
-	unsigned short dbg_spc[6];
-	unsigned short *dbg;
-
-	// Force alignment to long word boundary
-	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
-
-	// Build up the debug instruction
-	dbg[0] = 0x2c80 | (reg & 0xf);
-	dbg[1] = (data >> 16) & 0xffff;
-	dbg[2] = data & 0xffff;
-	dbg[3] = 0;
-
-	// Perform the wdebug instruction
-#if 0
-	// This strain is for gas which doesn't have the wdebug instructions defined
-	asm(	"move.l	%0, %%a0\n\t"
-		".word	0xfbd0\n\t"
-		".word	0x0003\n\t"
-	    :: "g" (dbg) : "a0");
-#else
-	// And this is for when it does
-	asm(	"wdebug	(%0)" :: "a" (dbg));
-#endif
-}
-
-#endif
diff --git a/include/asm-m68knommu/md.h b/include/asm-m68knommu/md.h
deleted file mode 100644
index d810c78de5ff..000000000000
--- a/include/asm-m68knommu/md.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/md.h>
diff --git a/include/asm-m68knommu/mman.h b/include/asm-m68knommu/mman.h
deleted file mode 100644
index 4846c682efed..000000000000
--- a/include/asm-m68knommu/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/mman.h>
diff --git a/include/asm-m68knommu/mmu.h b/include/asm-m68knommu/mmu.h
deleted file mode 100644
index 5fa6b68353ba..000000000000
--- a/include/asm-m68knommu/mmu.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __M68KNOMMU_MMU_H
-#define __M68KNOMMU_MMU_H
-
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-
-#endif /* __M68KNOMMU_MMU_H */
diff --git a/include/asm-m68knommu/mmu_context.h b/include/asm-m68knommu/mmu_context.h
deleted file mode 100644
index 9ccee4278c97..000000000000
--- a/include/asm-m68knommu/mmu_context.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __M68KNOMMU_MMU_CONTEXT_H
-#define __M68KNOMMU_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	// mm->context = virt_to_phys(mm->pgd);
-	return(0);
-}
-
-#define destroy_context(mm)		do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev_mm,
-			       struct mm_struct *next_mm)
-{
-}
-
-#endif
diff --git a/include/asm-m68knommu/module.h b/include/asm-m68knommu/module.h
deleted file mode 100644
index 2e45ab50b232..000000000000
--- a/include/asm-m68knommu/module.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef ASM_M68KNOMMU_MODULE_H
-#define ASM_M68KNOMMU_MODULE_H
-
-struct mod_arch_specific {
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif /* ASM_M68KNOMMU_MODULE_H */
diff --git a/include/asm-m68knommu/movs.h b/include/asm-m68knommu/movs.h
deleted file mode 100644
index 81a16779e833..000000000000
--- a/include/asm-m68knommu/movs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/movs.h>
diff --git a/include/asm-m68knommu/msgbuf.h b/include/asm-m68knommu/msgbuf.h
deleted file mode 100644
index bdfadec4d52d..000000000000
--- a/include/asm-m68knommu/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/msgbuf.h>
diff --git a/include/asm-m68knommu/mutex.h b/include/asm-m68knommu/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-m68knommu/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-m68knommu/namei.h b/include/asm-m68knommu/namei.h
deleted file mode 100644
index 31a85d27b931..000000000000
--- a/include/asm-m68knommu/namei.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/namei.h>
diff --git a/include/asm-m68knommu/nettel.h b/include/asm-m68knommu/nettel.h
deleted file mode 100644
index 0299f6a2deeb..000000000000
--- a/include/asm-m68knommu/nettel.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/****************************************************************************/
-
-/*
- *	nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
- *
- *	(C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
- * 	(C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
- * 	(C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
- */
-
-/****************************************************************************/
-#ifndef	nettel_h
-#define	nettel_h
-/****************************************************************************/
-
-
-/****************************************************************************/
-#ifdef CONFIG_NETtel
-/****************************************************************************/
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#endif
-
-/*---------------------------------------------------------------------------*/
-#if defined(CONFIG_M5307)
-/*
- *	NETtel/5307 based hardware first. DTR/DCD lines are wired to
- *	GPIO lines. Most of the LED's are driver through a latch
- *	connected to CS2.
- */
-#define	MCFPP_DCD1	0x0001
-#define	MCFPP_DCD0	0x0002
-#define	MCFPP_DTR1	0x0004
-#define	MCFPP_DTR0	0x0008
-
-#define	NETtel_LEDADDR	0x30400000
-
-#ifndef __ASSEMBLY__
-
-extern volatile unsigned short ppdata;
-
-/*
- *	These functions defined to give quasi generic access to the
- *	PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
-	ppdata = (ppdata & ~mask) | bits;
-	*pp = ppdata;
-}
-#endif
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5206e)
-/*
- *	NETtel/5206e based hardware has leds on latch on CS3.
- *	No support modem for lines??
- */
-#define	NETtel_LEDADDR	0x50000000
-
-/*---------------------------------------------------------------------------*/
-#elif defined(CONFIG_M5272)
-/*
- *	NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
- */
-#define	MCFPP_DCD0	0x0080
-#define	MCFPP_DCD1	0x0000		/* Port 1 no DCD support */
-#define	MCFPP_DTR0	0x0040
-#define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
-
-#ifndef __ASSEMBLY__
-/*
- *	These functions defined to give quasi generic access to the
- *	PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	*pp = (*pp & ~mask) | bits;
-}
-#endif
-
-#endif
-/*---------------------------------------------------------------------------*/
-
-/****************************************************************************/
-#endif /* CONFIG_NETtel */
-/****************************************************************************/
-#endif	/* nettel_h */
diff --git a/include/asm-m68knommu/openprom.h b/include/asm-m68knommu/openprom.h
deleted file mode 100644
index fdba7953ff9f..000000000000
--- a/include/asm-m68knommu/openprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/openprom.h>
diff --git a/include/asm-m68knommu/oplib.h b/include/asm-m68knommu/oplib.h
deleted file mode 100644
index ce079dc332d9..000000000000
--- a/include/asm-m68knommu/oplib.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/oplib.h>
diff --git a/include/asm-m68knommu/page.h b/include/asm-m68knommu/page.h
deleted file mode 100644
index 1e82ebb7d644..000000000000
--- a/include/asm-m68knommu/page.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _M68KNOMMU_PAGE_H
-#define _M68KNOMMU_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
- 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)	((x).pte)
-#define pmd_val(x)	((&x)->pmd[0])
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __pmd(x)	((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
-#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
-
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
-#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
-#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
-
-#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
-				((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/page.h>
-
-#endif /* _M68KNOMMU_PAGE_H */
diff --git a/include/asm-m68knommu/page_offset.h b/include/asm-m68knommu/page_offset.h
deleted file mode 100644
index d4e73e0ba646..000000000000
--- a/include/asm-m68knommu/page_offset.h
+++ /dev/null
@@ -1,5 +0,0 @@
-
-
-/* This handles the memory map.. */
-#define	PAGE_OFFSET_RAW		CONFIG_RAMBASE
-
diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h
deleted file mode 100644
index 6044397adb64..000000000000
--- a/include/asm-m68knommu/param.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68KNOMMU_PARAM_H
-#define _M68KNOMMU_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ
-#define	USER_HZ		HZ
-#define	CLOCKS_PER_SEC	(USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ	100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _M68KNOMMU_PARAM_H */
diff --git a/include/asm-m68knommu/pci.h b/include/asm-m68knommu/pci.h
deleted file mode 100644
index a13f3cc87451..000000000000
--- a/include/asm-m68knommu/pci.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef M68KNOMMU_PCI_H
-#define	M68KNOMMU_PCI_H
-
-#include <asm-m68k/pci.h>
-
-#ifdef CONFIG_COMEMPCI
-/*
- *	These are pretty much arbitary with the CoMEM implementation.
- *	We have the whole address space to ourselves.
- */
-#define PCIBIOS_MIN_IO		0x100
-#define PCIBIOS_MIN_MEM		0x00010000
-
-#define pcibios_scan_all_fns(a, b)	0
-
-/*
- * Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
-	return 1;
-}
-
-#endif /* CONFIG_COMEMPCI */
-
-#endif /* M68KNOMMU_PCI_H */
diff --git a/include/asm-m68knommu/percpu.h b/include/asm-m68knommu/percpu.h
deleted file mode 100644
index 5de72c327efd..000000000000
--- a/include/asm-m68knommu/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_PERCPU__
-#define __ARCH_M68KNOMMU_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/include/asm-m68knommu/pgalloc.h b/include/asm-m68knommu/pgalloc.h
deleted file mode 100644
index d6352f671ec0..000000000000
--- a/include/asm-m68knommu/pgalloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _M68KNOMMU_PGALLOC_H
-#define _M68KNOMMU_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _M68KNOMMU_PGALLOC_H */
diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h
deleted file mode 100644
index 46251016e821..000000000000
--- a/include/asm-m68knommu/pgtable.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _M68KNOMMU_PGTABLE_H
-#define _M68KNOMMU_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-/*
- * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-/*
- * Trivial page table functions.
- */
-#define pgd_present(pgd)	(1)
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-#define	pmd_offset(a, b)	((void *)0)
-
-#define PAGE_NONE	__pgprot(0)
-#define PAGE_SHARED	__pgprot(0)
-#define PAGE_COPY	__pgprot(0)
-#define PAGE_READONLY	__pgprot(0)
-#define PAGE_KERNEL	__pgprot(0)
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/include/asm-m68knommu/poll.h b/include/asm-m68knommu/poll.h
deleted file mode 100644
index ee1b6cb549ca..000000000000
--- a/include/asm-m68knommu/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/poll.h>
diff --git a/include/asm-m68knommu/posix_types.h b/include/asm-m68knommu/posix_types.h
deleted file mode 100644
index 6205fb9392a3..000000000000
--- a/include/asm-m68knommu/posix_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/posix_types.h>
diff --git a/include/asm-m68knommu/processor.h b/include/asm-m68knommu/processor.h
deleted file mode 100644
index 91cba18acdd3..000000000000
--- a/include/asm-m68knommu/processor.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * include/asm-m68knommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	return(sw_usp);
-#else
-  	unsigned long usp;
-	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
-	return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	sw_usp = usp;
-#else
-	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE	(0xF0000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE	0
-
-/* 
- * if you change this structure, you must change the code and offsets
- * in m68k/machasm.S
- */
-   
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned short sr;		/* saved status register */
-	unsigned short fs;		/* saved fs (sfc, dfc) */
-	unsigned long  crp[2];		/* cpu root pointer */
-	unsigned long  esp0;		/* points to SR of stack frame */
-	unsigned long  fp[8*3];
-	unsigned long  fpcntl[3];	/* fp control regs */
-	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-};
-
-#define INIT_THREAD  { \
-	sizeof(init_stack) + (unsigned long) init_stack, 0, \
-	PS_S, __KERNEL_DS, \
-	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
-}
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#if defined(CONFIG_COLDFIRE)
-#define	reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
-#else
-#define	reformat(_regs)		do { } while (0)
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp)			\
-do {							\
-	set_fs(USER_DS); /* reads from user space */	\
-	(_regs)->pc = (_pc);				\
-	((struct switch_stack *)(_regs))[-1].a6 = 0;	\
-	reformat(_regs);				\
-	if (current->mm)				\
-		(_regs)->d5 = current->mm->start_data;	\
-	(_regs)->sr &= ~0x2000;				\
-	wrusp(_usp);					\
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    (virt_addr_valid((tsk)->thread.esp0))) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()    barrier()
-
-#endif
diff --git a/include/asm-m68knommu/ptrace.h b/include/asm-m68knommu/ptrace.h
deleted file mode 100644
index 47258e86e8c4..000000000000
--- a/include/asm-m68knommu/ptrace.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1	   0
-#define PT_D2	   1
-#define PT_D3	   2
-#define PT_D4	   3
-#define PT_D5	   4
-#define PT_D6	   5
-#define PT_D7	   6
-#define PT_A0	   7
-#define PT_A1	   8
-#define PT_A2	   9
-#define PT_A3	   10
-#define PT_A4	   11
-#define PT_A5	   12
-#define PT_A6	   13
-#define PT_D0	   14
-#define PT_USP	   15
-#define PT_ORIG_D0 16
-#define PT_SR	   17
-#define PT_PC	   18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-  long     d1;
-  long     d2;
-  long     d3;
-  long     d4;
-  long     d5;
-  long     a0;
-  long     a1;
-  long     a2;
-  long     d0;
-  long     orig_d0;
-  long     stkadj;
-#ifdef CONFIG_COLDFIRE
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-  unsigned short sr;
-  unsigned long  pc;
-#else
-  unsigned short sr;
-  unsigned long  pc;
-  unsigned format :  4; /* frame format specifier */
-  unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
-	unsigned long  d6;
-	unsigned long  d7;
-	unsigned long  a3;
-	unsigned long  a4;
-	unsigned long  a5;
-	unsigned long  a6;
-	unsigned long  retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#ifdef CONFIG_FPU
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#endif
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/include/asm-m68knommu/quicc_simple.h b/include/asm-m68knommu/quicc_simple.h
deleted file mode 100644
index c3636932d4bc..000000000000
--- a/include/asm-m68knommu/quicc_simple.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/***********************************
- * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
- ***********************************
- *
- ***************************************
- * Simple drivers common header
- ***************************************
- */
-
-#ifndef __SIMPLE_H
-#define __SIMPLE_H
-
-/* #include "quicc.h" */
-
-#define GLB_SCC_0   0
-#define GLB_SCC_1   1
-#define GLB_SCC_2   2
-#define GLB_SCC_3   3
-
-typedef void (int_routine)(unsigned short interrupt_event);
-typedef int_routine *int_routine_ptr; 
-typedef void *(alloc_routine)(int length);
-typedef void (free_routine)(int scc_num, int channel_num, void *buf);
-typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
-typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
-typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
-typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
-
-/* user defined functions for global errors */
-typedef void (handle_glob_overrun_routine)(int scc_number);
-typedef void (handle_glob_underrun_routine)(int scc_number);
-typedef void (glob_intr_q_overflow_routine)(int scc_number);
-
-/*
- * General initialization and command routines
- */
-void quicc_issue_cmd (unsigned short cmd, int scc_num);
-void quicc_init(void);
-void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
-void quicc_scc_start(int scc_num);
-void quicc_scc_loopback(int scc_num);
-
-/* Interrupt enable/disable routines for critical pieces of code*/
-unsigned short  IntrDis(void);
-void            IntrEna(unsigned short old_sr);
-
-/* For debugging */
-void print_rbd(int scc_num);
-void print_tbd(int scc_num);
-
-#endif
diff --git a/include/asm-m68knommu/resource.h b/include/asm-m68knommu/resource.h
deleted file mode 100644
index 7fa63d5ea576..000000000000
--- a/include/asm-m68knommu/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/resource.h>
diff --git a/include/asm-m68knommu/rtc.h b/include/asm-m68knommu/rtc.h
deleted file mode 100644
index eaf18ec83c8e..000000000000
--- a/include/asm-m68knommu/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/rtc.h>
diff --git a/include/asm-m68knommu/scatterlist.h b/include/asm-m68knommu/scatterlist.h
deleted file mode 100644
index afc4788b0d2c..000000000000
--- a/include/asm-m68knommu/scatterlist.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68KNOMMU_SCATTERLIST_H
-#define _M68KNOMMU_SCATTERLIST_H
-
-#include <linux/mm.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
-
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#define ISA_DMA_THRESHOLD	(0xffffffff)
-
-#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
diff --git a/include/asm-m68knommu/sections.h b/include/asm-m68knommu/sections.h
deleted file mode 100644
index dd0ecb98ec08..000000000000
--- a/include/asm-m68knommu/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _M68KNOMMU_SECTIONS_H
-#define _M68KNOMMU_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/include/asm-m68knommu/segment.h b/include/asm-m68knommu/segment.h
deleted file mode 100644
index 42318ebec7ec..000000000000
--- a/include/asm-m68knommu/segment.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _M68K_SEGMENT_H
-#define _M68K_SEGMENT_H
-
-/* define constants */
-/* Address spaces (FC0-FC2) */
-#define USER_DATA     (1)
-#ifndef __USER_DS
-#define __USER_DS     (USER_DATA)
-#endif
-#define USER_PROGRAM  (2)
-#define SUPER_DATA    (5)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS   (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (6)
-#define CPU_SPACE     (7)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-#define USER_DS		MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
-    return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
-    /* return the supervisor data space code */
-    return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68K_SEGMENT_H */
diff --git a/include/asm-m68knommu/semaphore.h b/include/asm-m68knommu/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-m68knommu/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-m68knommu/sembuf.h b/include/asm-m68knommu/sembuf.h
deleted file mode 100644
index 3a634f9ecf50..000000000000
--- a/include/asm-m68knommu/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sembuf.h>
diff --git a/include/asm-m68knommu/setup.h b/include/asm-m68knommu/setup.h
deleted file mode 100644
index fb86bb2a6078..000000000000
--- a/include/asm-m68knommu/setup.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifdef __KERNEL__
-
-#include <asm-m68k/setup.h>
-
-/* We have a bigger command line buffer. */
-#undef COMMAND_LINE_SIZE
-
-#endif  /*  __KERNEL__  */
-
-#define COMMAND_LINE_SIZE	512
diff --git a/include/asm-m68knommu/shm.h b/include/asm-m68knommu/shm.h
deleted file mode 100644
index cc8e522d9050..000000000000
--- a/include/asm-m68knommu/shm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shm.h>
diff --git a/include/asm-m68knommu/shmbuf.h b/include/asm-m68knommu/shmbuf.h
deleted file mode 100644
index bc34cf8eefce..000000000000
--- a/include/asm-m68knommu/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmbuf.h>
diff --git a/include/asm-m68knommu/shmparam.h b/include/asm-m68knommu/shmparam.h
deleted file mode 100644
index d7ee69648ebf..000000000000
--- a/include/asm-m68knommu/shmparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmparam.h>
diff --git a/include/asm-m68knommu/sigcontext.h b/include/asm-m68knommu/sigcontext.h
deleted file mode 100644
index 36c293fc133d..000000000000
--- a/include/asm-m68knommu/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
-#define _ASM_M68KNOMMU_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long  sc_mask; 	/* old sigmask */
-	unsigned long  sc_usp;		/* old user stack pointer */
-	unsigned long  sc_d0;
-	unsigned long  sc_d1;
-	unsigned long  sc_a0;
-	unsigned long  sc_a1;
-	unsigned long  sc_a5;
-	unsigned short sc_sr;
-	unsigned long  sc_pc;
-	unsigned short sc_formatvec;
-};
-
-#endif
diff --git a/include/asm-m68knommu/siginfo.h b/include/asm-m68knommu/siginfo.h
deleted file mode 100644
index b18e5f4064ae..000000000000
--- a/include/asm-m68knommu/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68KNOMMU_SIGINFO_H
-#define _M68KNOMMU_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/include/asm-m68knommu/signal.h b/include/asm-m68knommu/signal.h
deleted file mode 100644
index 216c08be54a0..000000000000
--- a/include/asm-m68knommu/signal.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef _M68KNOMMU_SIGNAL_H
-#define _M68KNOMMU_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/include/asm-m68knommu/smp.h b/include/asm-m68knommu/smp.h
deleted file mode 100644
index 9e9bd7e58922..000000000000
--- a/include/asm-m68knommu/smp.h
+++ /dev/null
@@ -1 +0,0 @@
-/* nothing required here yet */
diff --git a/include/asm-m68knommu/socket.h b/include/asm-m68knommu/socket.h
deleted file mode 100644
index ac5478bf6371..000000000000
--- a/include/asm-m68knommu/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/socket.h>
diff --git a/include/asm-m68knommu/sockios.h b/include/asm-m68knommu/sockios.h
deleted file mode 100644
index dcc6a8900ce2..000000000000
--- a/include/asm-m68knommu/sockios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sockios.h>
diff --git a/include/asm-m68knommu/spinlock.h b/include/asm-m68knommu/spinlock.h
deleted file mode 100644
index 6bb1f06c4781..000000000000
--- a/include/asm-m68knommu/spinlock.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/spinlock.h>
diff --git a/include/asm-m68knommu/stat.h b/include/asm-m68knommu/stat.h
deleted file mode 100644
index 3d4b260e7c03..000000000000
--- a/include/asm-m68knommu/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/stat.h>
diff --git a/include/asm-m68knommu/statfs.h b/include/asm-m68knommu/statfs.h
deleted file mode 100644
index 2ce99eaf0970..000000000000
--- a/include/asm-m68knommu/statfs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/statfs.h>
diff --git a/include/asm-m68knommu/string.h b/include/asm-m68knommu/string.h
deleted file mode 100644
index af09e17000fc..000000000000
--- a/include/asm-m68knommu/string.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _M68KNOMMU_STRING_H_
-#define _M68KNOMMU_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_STRCPY
-static inline char * strcpy(char * dest,const char *src)
-{
-  char *xdest = dest;
-
-  __asm__ __volatile__
-       ("1:\tmoveb %1@+,%0@+\n\t"
-        "jne 1b"
-	: "=a" (dest), "=a" (src)
-        : "0" (dest), "1" (src) : "memory");
-  return xdest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static inline char * strncpy(char *dest, const char *src, size_t n)
-{
-  char *xdest = dest;
-
-  if (n == 0)
-    return xdest;
-
-  __asm__ __volatile__
-       ("1:\tmoveb %1@+,%0@+\n\t"
-	"jeq 2f\n\t"
-        "subql #1,%2\n\t"
-        "jne 1b\n\t"
-        "2:"
-        : "=a" (dest), "=a" (src), "=d" (n)
-        : "0" (dest), "1" (src), "2" (n)
-        : "memory");
-  return xdest;
-}
-
-
-#ifndef CONFIG_COLDFIRE
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char * cs,const char * ct)
-{
-  char __res;
-
-  __asm__
-       ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
-        "cmpb %1@+,%2\n\t"      /* compare a byte */
-        "jne  2f\n\t"           /* not equal, break out */
-        "tstb %2\n\t"           /* at end of cs? */
-        "jne  1b\n\t"           /* no, keep going */
-        "jra  3f\n\t"		/* strings are equal */
-        "2:\tsubb %1@-,%2\n\t"  /* *cs - *ct */
-        "3:"
-        : "=a" (cs), "=a" (ct), "=d" (__res)
-        : "0" (cs), "1" (ct));
-
-  return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char * cs,const char * ct,size_t count)
-{
-  char __res;
-
-  if (!count)
-    return 0;
-  __asm__
-       ("1:\tmovb %0@+,%3\n\t"          /* get *cs */
-        "cmpb   %1@+,%3\n\t"            /* compare a byte */
-        "jne    3f\n\t"                 /* not equal, break out */
-        "tstb   %3\n\t"                 /* at end of cs? */
-        "jeq    4f\n\t"                 /* yes, all done */
-        "subql  #1,%2\n\t"              /* no, adjust count */
-        "jne    1b\n\t"                 /* more to do, keep going */
-        "2:\tmoveq #0,%3\n\t"           /* strings are equal */
-        "jra    4f\n\t"
-        "3:\tsubb %1@-,%3\n\t"          /* *cs - *ct */
-        "4:"
-        : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
-        : "0" (cs), "1" (ct), "2" (count));
-  return __res;
-}
-
-#endif /* CONFIG_COLDFIRE */
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void * s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *d, const void *s, size_t count);
-
-#else /* KERNEL */
-
-/*
- *	let user libraries deal with these,
- *	IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-
-#endif /* _M68K_STRING_H_ */
diff --git a/include/asm-m68knommu/system.h b/include/asm-m68knommu/system.h
deleted file mode 100644
index 64c64432bbb8..000000000000
--- a/include/asm-m68knommu/system.h
+++ /dev/null
@@ -1,313 +0,0 @@
-#ifndef _M68KNOMMU_SYSTEM_H
-#define _M68KNOMMU_SYSTEM_H
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/entry.h>
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.  This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- */
-asmlinkage void resume(void);
-#define switch_to(prev,next,last)				\
-{								\
-  void *_last;							\
-  __asm__ __volatile__(						\
-  	"movel	%1, %%a0\n\t"					\
-	"movel	%2, %%a1\n\t"					\
-	"jbsr resume\n\t"					\
-	"movel	%%d1, %0\n\t"					\
-       : "=d" (_last)						\
-       : "d" (prev), "d" (next)					\
-       : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1");	\
-  (last) = _last;						\
-}
-
-#ifdef CONFIG_COLDFIRE
-#define local_irq_enable() __asm__ __volatile__ (		\
-	"move %/sr,%%d0\n\t"					\
-	"andi.l #0xf8ff,%%d0\n\t"				\
-	"move %%d0,%/sr\n"					\
-	: /* no outputs */					\
-	:							\
-        : "cc", "%d0", "memory")
-#define local_irq_disable() __asm__ __volatile__ (		\
-	"move %/sr,%%d0\n\t"					\
-	"ori.l #0x0700,%%d0\n\t"				\
-	"move %%d0,%/sr\n"					\
-	: /* no outputs */					\
-	:							\
-	: "cc", "%d0", "memory")
-/* For spinlocks etc */
-#define local_irq_save(x) __asm__ __volatile__ (		\
-	"movew %%sr,%0\n\t"					\
-	"movew #0x0700,%%d0\n\t"				\
-	"or.l  %0,%%d0\n\t"					\
-	"movew %%d0,%/sr"					\
-	: "=d" (x)						\
-	:							\
-	: "cc", "%d0", "memory")
-#else
-
-/* portable version */ /* FIXME - see entry.h*/
-#define ALLOWINT 0xf8ff
-
-#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
-#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
-#endif
-
-#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
-#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
-
-/* For spinlocks etc */
-#ifndef local_irq_save
-#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
-#endif
-
-#define	irqs_disabled()			\
-({					\
-	unsigned long flags;		\
-	local_save_flags(flags);	\
-	((flags & 0x0700) == 0x0700);	\
-})
-
-#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
-
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
-#define nop()  asm volatile ("nop"::)
-#define mb()   asm volatile (""   : : :"memory")
-#define rmb()  asm volatile (""   : : :"memory")
-#define wmb()  asm volatile (""   : : :"memory")
-#define set_mb(var, value)	({ (var) = (value); wmb(); })
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-#ifndef CONFIG_RMW_INSNS
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
-  unsigned long tmp, flags;
-
-  local_irq_save(flags);
-
-  switch (size) {
-  case 1:
-    __asm__ __volatile__
-    ("moveb %2,%0\n\t"
-     "moveb %1,%2"
-    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  case 2:
-    __asm__ __volatile__
-    ("movew %2,%0\n\t"
-     "movew %1,%2"
-    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  case 4:
-    __asm__ __volatile__
-    ("movel %2,%0\n\t"
-     "movel %1,%2"
-    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
-    break;
-  }
-  local_irq_restore(flags);
-  return tmp;
-}
-#else
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
-	switch (size) {
-	    case 1:
-		__asm__ __volatile__
-			("moveb %2,%0\n\t"
-			 "1:\n\t"
-			 "casb %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	    case 2:
-		__asm__ __volatile__
-			("movew %2,%0\n\t"
-			 "1:\n\t"
-			 "casw %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	    case 4:
-		__asm__ __volatile__
-			("movel %2,%0\n\t"
-			 "1:\n\t"
-			 "casl %0,%1,%2\n\t"
-			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
-		break;
-	}
-	return x;
-}
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
-	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
-#define HARD_RESET_NOW() ({		\
-        local_irq_disable();		\
-        asm("				\
-        moveal #0x10c00000, %a0;	\
-        moveb #0, 0xFFFFF300;		\
-        moveal 0(%a0), %sp;		\
-        moveal 4(%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-
-#ifdef CONFIG_COLDFIRE
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-/*
- * Need to account for broken early mask of 5272 silicon. So don't
- * jump through the original start address. Jump strait into the
- * known start of the FLASH code.
- */
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        jmp 0xf0000400;			\
-        ");				\
-})
-#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
-      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-	moveal #0x10000044, %a0;	\
-	movel #0xffffffff, (%a0);	\
-	moveal #0x10000001, %a0;	\
-	moveb #0x00, (%a0);		\
-        moveal #0xf0000004, %a0;	\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#elif defined(CONFIG_M5272)
-/*
- * Retrieve the boot address in flash using CSBR0 and CSOR0
- * find the reset vector at flash_address + 4 (e.g. 0x400)
- * remap it in the flash's current location (e.g. 0xf0000400)
- * and jump there.
- */ 
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %%sr;		\
-	move.l	%0+0x40,%%d0;		\
-	and.l	%0+0x44,%%d0;		\
-	andi.l	#0xfffff000,%%d0;	\
-	mov.l	%%d0,%%a0;		\
-	or.l	4(%%a0),%%d0;		\
-	mov.l	%%d0,%%a0;		\
-	jmp (%%a0);"			\
-	: /* No output */		\
-	: "o" (*(char *)MCF_MBAR) );	\
-})
-#elif defined(CONFIG_M528x)
-/*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
- */
-#define HARD_RESET_NOW() \
-({						\
-	unsigned char volatile *reset;		\
-	asm("move.w	#0x2700, %sr");		\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));	\
-	while(1)				\
-	*reset |= (0x01 << 7);\
-})
-#elif defined(CONFIG_M523x)
-#define HARD_RESET_NOW() ({		\
-	asm("				\
-	movew #0x2700, %sr;		\
-	movel #0x01000000, %sp;		\
-	moveal #0x40110000, %a0;	\
-	moveb #0x80, (%a0);		\
-	");				\
-})
-#elif defined(CONFIG_M520x)
-	/*
-	 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
-	 * RCR), that when set, resets the MCF5208.
-	 */
-#define HARD_RESET_NOW() 		\
-({					\
-	unsigned char volatile *reset;	\
-	asm("move.w     #0x2700, %sr");	\
-	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));	\
-	while(1)			\
-		*reset |= 0x80;		\
-})
-#else
-#define HARD_RESET_NOW() ({		\
-        asm("				\
-	movew #0x2700, %sr;		\
-        moveal #0x4, %a0;		\
-        moveal (%a0), %a0;		\
-        jmp (%a0);			\
-        ");				\
-})
-#endif
-#endif
-#define arch_align_stack(x) (x)
-
-#endif /* _M68KNOMMU_SYSTEM_H */
diff --git a/include/asm-m68knommu/termbits.h b/include/asm-m68knommu/termbits.h
deleted file mode 100644
index 05dd6bc27285..000000000000
--- a/include/asm-m68knommu/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termbits.h>
diff --git a/include/asm-m68knommu/termios.h b/include/asm-m68knommu/termios.h
deleted file mode 100644
index e7337881a985..000000000000
--- a/include/asm-m68knommu/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termios.h>
diff --git a/include/asm-m68knommu/thread_info.h b/include/asm-m68knommu/thread_info.h
deleted file mode 100644
index 95996d978bed..000000000000
--- a/include/asm-m68knommu/thread_info.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* thread_info.h: m68knommu low-level thread information
- * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE_ORDER (0)
-#else
-#define THREAD_SIZE_ORDER (1)
-#endif
-                                                                                
-/*
- * for asm files, THREAD_SIZE is now generated by asm-offsets.c
- */
-#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
-
-/*
- * low level task data.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	unsigned long	   flags;		/* low level flags */
-	int		   cpu;			/* cpu we're on */
-	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
-	struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-	__asm__(
-		"move.l	%%sp, %0 \n\t"
-		"and.l	%1, %0"
-		: "=&d"(ti)
-		: "di" (~(THREAD_SIZE-1))
-		);
-	return ti;
-}
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), THREAD_SIZE_ORDER)
-#endif /* __ASSEMBLY__ */
-
-#define	PREEMPT_ACTIVE	0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-
-#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-m68knommu/timex.h b/include/asm-m68knommu/timex.h
deleted file mode 100644
index 109050f3fe91..000000000000
--- a/include/asm-m68knommu/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/include/asm-m68knommu/timex.h
- *
- * m68knommu architecture timex specifications
- */
-#ifndef _ASM_M68KNOMMU_TIMEX_H
-#define _ASM_M68KNOMMU_TIMEX_H
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#define CLOCK_TICK_RATE	MCF_CLK
-#else
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-#endif
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
-	return 0;
-}
-
-#endif
diff --git a/include/asm-m68knommu/tlb.h b/include/asm-m68knommu/tlb.h
deleted file mode 100644
index 77a7c51ca299..000000000000
--- a/include/asm-m68knommu/tlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/tlb.h>
diff --git a/include/asm-m68knommu/tlbflush.h b/include/asm-m68knommu/tlbflush.h
deleted file mode 100644
index a470cfb803eb..000000000000
--- a/include/asm-m68knommu/tlbflush.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _M68KNOMMU_TLBFLUSH_H
-#define _M68KNOMMU_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
-				   unsigned long start, unsigned long end)
-{
-	BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
-	BUG();
-}
-
-#endif /* _M68KNOMMU_TLBFLUSH_H */
diff --git a/include/asm-m68knommu/topology.h b/include/asm-m68knommu/topology.h
deleted file mode 100644
index ca173e9f26ff..000000000000
--- a/include/asm-m68knommu/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/include/asm-m68knommu/traps.h b/include/asm-m68knommu/traps.h
deleted file mode 100644
index d0671e5f8e29..000000000000
--- a/include/asm-m68knommu/traps.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- *  linux/include/asm/traps.h
- *
- *  Copyright (C) 1993        Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _M68KNOMMU_TRAPS_H
-#define _M68KNOMMU_TRAPS_H
-
-#ifndef __ASSEMBLY__
-
-typedef void (*e_vector)(void);
-
-extern e_vector vectors[];
-extern void init_vectors(void);
-extern void enable_vector(unsigned int irq);
-extern void disable_vector(unsigned int irq);
-extern void ack_vector(unsigned int irq);
-
-#endif
-
-#define VEC_BUSERR  (2)
-#define VEC_ADDRERR (3)
-#define VEC_ILLEGAL (4)
-#define VEC_ZERODIV (5)
-#define VEC_CHK     (6)
-#define VEC_TRAP    (7)
-#define VEC_PRIV    (8)
-#define VEC_TRACE   (9)
-#define VEC_LINE10  (10)
-#define VEC_LINE11  (11)
-#define VEC_RESV1   (12)
-#define VEC_COPROC  (13)
-#define VEC_FORMAT  (14)
-#define VEC_UNINT   (15)
-#define VEC_SPUR    (24)
-#define VEC_INT1    (25)
-#define VEC_INT2    (26)
-#define VEC_INT3    (27)
-#define VEC_INT4    (28)
-#define VEC_INT5    (29)
-#define VEC_INT6    (30)
-#define VEC_INT7    (31)
-#define VEC_SYS     (32)
-#define VEC_TRAP1   (33)
-#define VEC_TRAP2   (34)
-#define VEC_TRAP3   (35)
-#define VEC_TRAP4   (36)
-#define VEC_TRAP5   (37)
-#define VEC_TRAP6   (38)
-#define VEC_TRAP7   (39)
-#define VEC_TRAP8   (40)
-#define VEC_TRAP9   (41)
-#define VEC_TRAP10  (42)
-#define VEC_TRAP11  (43)
-#define VEC_TRAP12  (44)
-#define VEC_TRAP13  (45)
-#define VEC_TRAP14  (46)
-#define VEC_TRAP15  (47)
-#define VEC_FPBRUC  (48)
-#define VEC_FPIR    (49)
-#define VEC_FPDIVZ  (50)
-#define VEC_FPUNDER (51)
-#define VEC_FPOE    (52)
-#define VEC_FPOVER  (53)
-#define VEC_FPNAN   (54)
-#define VEC_FPUNSUP (55)
-#define	VEC_UNIMPEA (60)
-#define	VEC_UNIMPII (61)
-#define VEC_USER    (64)
-
-#define VECOFF(vec) ((vec)<<2)
-
-#ifndef __ASSEMBLY__
-
-/* Status register bits */
-#define PS_T  (0x8000)
-#define PS_S  (0x2000)
-#define PS_M  (0x1000)
-#define PS_C  (0x0001)
-
-/* structure for stack frames */
-
-struct frame {
-    struct pt_regs ptregs;
-    union {
-	    struct {
-		    unsigned long  iaddr;    /* instruction address */
-	    } fmt2;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-	    } fmt3;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-		    unsigned long  pc;	     /* pc of faulted instr */
-	    } fmt4;
-	    struct {
-		    unsigned long  effaddr;  /* effective address */
-		    unsigned short ssw;      /* special status word */
-		    unsigned short wb3s;     /* write back 3 status */
-		    unsigned short wb2s;     /* write back 2 status */
-		    unsigned short wb1s;     /* write back 1 status */
-		    unsigned long  faddr;    /* fault address */
-		    unsigned long  wb3a;     /* write back 3 address */
-		    unsigned long  wb3d;     /* write back 3 data */
-		    unsigned long  wb2a;     /* write back 2 address */
-		    unsigned long  wb2d;     /* write back 2 data */
-		    unsigned long  wb1a;     /* write back 1 address */
-		    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
-		    unsigned long  pd1;      /* push data 1*/
-		    unsigned long  pd2;      /* push data 2*/
-		    unsigned long  pd3;      /* push data 3*/
-	    } fmt7;
-	    struct {
-		    unsigned long  iaddr;    /* instruction address */
-		    unsigned short int1[4];  /* internal registers */
-	    } fmt9;
-	    struct {
-		    unsigned short int1;
-		    unsigned short ssw;      /* special status word */
-		    unsigned short isc;      /* instruction stage c */
-		    unsigned short isb;      /* instruction stage b */
-		    unsigned long  daddr;    /* data cycle fault address */
-		    unsigned short int2[2];
-		    unsigned long  dobuf;    /* data cycle output buffer */
-		    unsigned short int3[2];
-	    } fmta;
-	    struct {
-		    unsigned short int1;
-		    unsigned short ssw;     /* special status word */
-		    unsigned short isc;     /* instruction stage c */
-		    unsigned short isb;     /* instruction stage b */
-		    unsigned long  daddr;   /* data cycle fault address */
-		    unsigned short int2[2];
-		    unsigned long  dobuf;   /* data cycle output buffer */
-		    unsigned short int3[4];
-		    unsigned long  baddr;   /* stage B address */
-		    unsigned short int4[2];
-		    unsigned long  dibuf;   /* data cycle input buffer */
-		    unsigned short int5[3];
-		    unsigned	   ver : 4; /* stack frame version # */
-		    unsigned	   int6:12;
-		    unsigned short int7[18];
-	    } fmtb;
-    } un;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _M68KNOMMU_TRAPS_H */
diff --git a/include/asm-m68knommu/types.h b/include/asm-m68knommu/types.h
deleted file mode 100644
index 031238c2d180..000000000000
--- a/include/asm-m68knommu/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/types.h>
diff --git a/include/asm-m68knommu/uaccess.h b/include/asm-m68knommu/uaccess.h
deleted file mode 100644
index 68bbe9b312f1..000000000000
--- a/include/asm-m68knommu/uaccess.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef __M68KNOMMU_UACCESS_H
-#define __M68KNOMMU_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-#define access_ok(type,addr,size)	_access_ok((unsigned long)(addr),(size))
-
-/*
- * It is not enough to just have access_ok check for a real RAM address.
- * This would disallow the case of code/ro-data running XIP in flash/rom.
- * Ideally we would check the possible flash ranges too, but that is
- * currently not so easy.
- */
-static inline int _access_ok(unsigned long addr, unsigned long size)
-{
-	return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr)				\
-({							\
-    int __pu_err = 0;					\
-    typeof(*(ptr)) __pu_val = (x);			\
-    switch (sizeof (*(ptr))) {				\
-    case 1:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, b);	\
-	break;						\
-    case 2:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, w);	\
-	break;						\
-    case 4:						\
-	__put_user_asm(__pu_err, __pu_val, ptr, l);	\
-	break;						\
-    case 8:						\
-	memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
-	break;						\
-    default:						\
-	__pu_err = __put_user_bad();			\
-	break;						\
-    }							\
-    __pu_err;						\
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-#define __put_user_asm(err,x,ptr,bwl)				\
-	__asm__ ("move" #bwl " %0,%1"				\
-		: /* no outputs */						\
-		:"d" (x),"m" (*__ptr(ptr)) : "memory")
-
-#define get_user(x, ptr)					\
-({								\
-    int __gu_err = 0;						\
-    typeof(x) __gu_val = 0;					\
-    switch (sizeof(*(ptr))) {					\
-    case 1:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
-	break;							\
-    case 2:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
-	break;							\
-    case 4:							\
-	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
-	break;							\
-    case 8:							\
-	memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));	\
-	break;							\
-    default:							\
-	__gu_val = 0;						\
-	__gu_err = __get_user_bad();				\
-	break;							\
-    }								\
-    (x) = (typeof(*(ptr))) __gu_val;				\
-    __gu_err;							\
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define __get_user_asm(err,x,ptr,bwl,reg)			\
-	__asm__ ("move" #bwl " %1,%0"				\
-		 : "=d" (x)					\
-		 : "m" (*__ptr(ptr)))
-
-#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
-	char *tmp;
-	strncpy(dst, src, count);
-	for (tmp = dst; *tmp && count > 0; tmp++, count--)
-		;
-	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
-	return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-__clear_user(void *to, unsigned long n)
-{
-	memset(to, 0, n);
-	return 0;
-}
-
-#define	clear_user(to,n)	__clear_user(to,n)
-
-#endif /* _M68KNOMMU_UACCESS_H */
diff --git a/include/asm-m68knommu/ucontext.h b/include/asm-m68knommu/ucontext.h
deleted file mode 100644
index 713a27f901cd..000000000000
--- a/include/asm-m68knommu/ucontext.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _M68KNOMMU_UCONTEXT_H
-#define _M68KNOMMU_UCONTEXT_H
-
-typedef int greg_t;
-#define NGREG 18
-typedef greg_t gregset_t[NGREG];
-
-typedef struct fpregset {
-	int f_pcr;
-	int f_psr;
-	int f_fpiaddr;
-	int f_fpregs[8][3];
-} fpregset_t;
-
-struct mcontext {
-	int version;
-	gregset_t gregs;
-	fpregset_t fpregs;
-};
-
-#define MCONTEXT_VERSION 2
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct mcontext	  uc_mcontext;
-	unsigned long	  uc_filler[80];
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif
diff --git a/include/asm-m68knommu/unaligned.h b/include/asm-m68knommu/unaligned.h
deleted file mode 100644
index eb1ea4cb9a59..000000000000
--- a/include/asm-m68knommu/unaligned.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_M68KNOMMU_UNALIGNED_H
-#define _ASM_M68KNOMMU_UNALIGNED_H
-
-
-#ifdef CONFIG_COLDFIRE
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#else
-/*
- * The m68k can do unaligned accesses itself. 
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif
-
-#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h
deleted file mode 100644
index 4ba98b9c5d79..000000000000
--- a/include/asm-m68knommu/unistd.h
+++ /dev/null
@@ -1,366 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		/* 110 */ not supported
-#define __NR_vhangup		111
-#define __NR_idle		/* 112 */ Obsolete
-#define __NR_vm86		/* 113 */ not supported
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_getpagesize	166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_chown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_lchown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_getdents64		220
-#define __NR_gettid		221
-#define __NR_tkill		222
-#define __NR_setxattr		223
-#define __NR_lsetxattr		224
-#define __NR_fsetxattr		225
-#define __NR_getxattr		226
-#define __NR_lgetxattr		227
-#define __NR_fgetxattr		228
-#define __NR_listxattr		229
-#define __NR_llistxattr		230
-#define __NR_flistxattr		231
-#define __NR_removexattr	232
-#define __NR_lremovexattr	233
-#define __NR_fremovexattr	234
-#define __NR_futex		235
-#define __NR_sendfile64		236
-#define __NR_mincore		237
-#define __NR_madvise		238
-#define __NR_fcntl64		239
-#define __NR_readahead		240
-#define __NR_io_setup		241
-#define __NR_io_destroy		242
-#define __NR_io_getevents	243
-#define __NR_io_submit		244
-#define __NR_io_cancel		245
-#define __NR_fadvise64		246
-#define __NR_exit_group		247
-#define __NR_lookup_dcookie	248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_remap_file_pages	252
-#define __NR_set_tid_address	253
-#define __NR_timer_create	254
-#define __NR_timer_settime	255
-#define __NR_timer_gettime	256
-#define __NR_timer_getoverrun	257
-#define __NR_timer_delete	258
-#define __NR_clock_settime	259
-#define __NR_clock_gettime	260
-#define __NR_clock_getres	261
-#define __NR_clock_nanosleep	262
-#define __NR_statfs64		263
-#define __NR_fstatfs64		264
-#define __NR_tgkill		265
-#define __NR_utimes		266
-#define __NR_fadvise64_64	267
-#define __NR_mbind		268
-#define __NR_get_mempolicy	269
-#define __NR_set_mempolicy	270
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_waitid		277
-#define __NR_vserver		278
-#define __NR_add_key		279
-#define __NR_request_key	280
-#define __NR_keyctl		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-#define __NR_migrate_pages	287
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_fstatat64		293
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-#define __NR_move_pages		310
-#define __NR_sched_setaffinity	311
-#define __NR_sched_getaffinity	312
-#define __NR_kexec_load		313
-#define __NR_getcpu		314
-#define __NR_epoll_pwait	315
-#define __NR_utimensat		316
-#define __NR_signalfd		317
-#define __NR_timerfd_create	318
-#define __NR_eventfd		319
-#define __NR_fallocate		320
-#define __NR_timerfd_settime	321
-#define __NR_timerfd_gettime	322
-
-#ifdef __KERNEL__
-
-#define NR_syscalls		323
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/include/asm-m68knommu/user.h b/include/asm-m68knommu/user.h
deleted file mode 100644
index a5a555b761c4..000000000000
--- a/include/asm-m68knommu/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/user.h>
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index 9a7274ba6a0b..49df8c4c9d25 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -82,7 +82,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		"2:	b	1b					\n"
 		"	.previous					\n"
 		: "=&r" (temp), "=m" (*m)
-		: "i" (bit), "m" (*m), "r" (~0));
+		: "ir" (bit), "m" (*m), "r" (~0));
 #endif /* CONFIG_CPU_MIPSR2 */
 	} else if (cpu_has_llsc) {
 		__asm__ __volatile__(
@@ -147,7 +147,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		"2:	b	1b					\n"
 		"	.previous					\n"
 		: "=&r" (temp), "=m" (*m)
-		: "i" (bit), "m" (*m));
+		: "ir" (bit), "m" (*m));
 #endif /* CONFIG_CPU_MIPSR2 */
 	} else if (cpu_has_llsc) {
 		__asm__ __volatile__(
@@ -428,7 +428,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		"2:	b	1b					\n"
 		"	.previous					\n"
 		: "=&r" (temp), "=m" (*m), "=&r" (res)
-		: "i" (bit), "m" (*m)
+		: "ir" (bit), "m" (*m)
 		: "memory");
 #endif
 	} else if (cpu_has_llsc) {
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index d39e143b4a3c..610fe3af7a03 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -51,6 +51,12 @@
 #define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
 #define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
 
+/*
+ * Valid machtype for group Mikrotik
+ */
+#define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
+#define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
+
 #define CL_SIZE			COMMAND_LINE_SIZE
 
 extern char *system_type;
diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h
index 230b3f1b69b1..c64afb40cd06 100644
--- a/include/asm-mips/dma-mapping.h
+++ b/include/asm-mips/dma-mapping.h
@@ -42,7 +42,7 @@ extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	int nelems, enum dma_data_direction direction);
 extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 	int nelems, enum dma_data_direction direction);
-extern int dma_mapping_error(dma_addr_t dma_addr);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
 extern int dma_supported(struct device *dev, u64 mask);
 
 static inline int
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
index e59d4c039661..8a3ef247659a 100644
--- a/include/asm-mips/fpu.h
+++ b/include/asm-mips/fpu.h
@@ -35,6 +35,8 @@ extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
 extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
 
 extern void fpu_emulator_init_fpu(void);
+extern int fpu_emulator_save_context(struct sigcontext __user *sc);
+extern int fpu_emulator_restore_context(struct sigcontext __user *sc);
 extern void _init_fpu(void);
 extern void _save_fp(struct task_struct *);
 extern void _restore_fp(struct task_struct *);
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
deleted file mode 100644
index 22f67d4a71ab..000000000000
--- a/include/asm-mips/gdb-stub.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC			37
-#define REG_FP			72
-#define REG_SP			29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS			90
-
-#define GDB_FR_REG0		(PTRSIZE*6)			/* 0 */
-#define GDB_FR_REG1		((GDB_FR_REG0) + LONGSIZE)	/* 1 */
-#define GDB_FR_REG2		((GDB_FR_REG1) + LONGSIZE)	/* 2 */
-#define GDB_FR_REG3		((GDB_FR_REG2) + LONGSIZE)	/* 3 */
-#define GDB_FR_REG4		((GDB_FR_REG3) + LONGSIZE)	/* 4 */
-#define GDB_FR_REG5		((GDB_FR_REG4) + LONGSIZE)	/* 5 */
-#define GDB_FR_REG6		((GDB_FR_REG5) + LONGSIZE)	/* 6 */
-#define GDB_FR_REG7		((GDB_FR_REG6) + LONGSIZE)	/* 7 */
-#define GDB_FR_REG8		((GDB_FR_REG7) + LONGSIZE)	/* 8 */
-#define GDB_FR_REG9	        ((GDB_FR_REG8) + LONGSIZE)	/* 9 */
-#define GDB_FR_REG10		((GDB_FR_REG9) + LONGSIZE)	/* 10 */
-#define GDB_FR_REG11		((GDB_FR_REG10) + LONGSIZE)	/* 11 */
-#define GDB_FR_REG12		((GDB_FR_REG11) + LONGSIZE)	/* 12 */
-#define GDB_FR_REG13		((GDB_FR_REG12) + LONGSIZE)	/* 13 */
-#define GDB_FR_REG14		((GDB_FR_REG13) + LONGSIZE)	/* 14 */
-#define GDB_FR_REG15		((GDB_FR_REG14) + LONGSIZE)	/* 15 */
-#define GDB_FR_REG16		((GDB_FR_REG15) + LONGSIZE)	/* 16 */
-#define GDB_FR_REG17		((GDB_FR_REG16) + LONGSIZE)	/* 17 */
-#define GDB_FR_REG18		((GDB_FR_REG17) + LONGSIZE)	/* 18 */
-#define GDB_FR_REG19		((GDB_FR_REG18) + LONGSIZE)	/* 19 */
-#define GDB_FR_REG20		((GDB_FR_REG19) + LONGSIZE)	/* 20 */
-#define GDB_FR_REG21		((GDB_FR_REG20) + LONGSIZE)	/* 21 */
-#define GDB_FR_REG22		((GDB_FR_REG21) + LONGSIZE)	/* 22 */
-#define GDB_FR_REG23		((GDB_FR_REG22) + LONGSIZE)	/* 23 */
-#define GDB_FR_REG24		((GDB_FR_REG23) + LONGSIZE)	/* 24 */
-#define GDB_FR_REG25		((GDB_FR_REG24) + LONGSIZE)	/* 25 */
-#define GDB_FR_REG26		((GDB_FR_REG25) + LONGSIZE)	/* 26 */
-#define GDB_FR_REG27		((GDB_FR_REG26) + LONGSIZE)	/* 27 */
-#define GDB_FR_REG28		((GDB_FR_REG27) + LONGSIZE)	/* 28 */
-#define GDB_FR_REG29		((GDB_FR_REG28) + LONGSIZE)	/* 29 */
-#define GDB_FR_REG30		((GDB_FR_REG29) + LONGSIZE)	/* 30 */
-#define GDB_FR_REG31		((GDB_FR_REG30) + LONGSIZE)	/* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS		((GDB_FR_REG31) + LONGSIZE)	/* 32 */
-#define GDB_FR_LO		((GDB_FR_STATUS) + LONGSIZE)	/* 33 */
-#define GDB_FR_HI		((GDB_FR_LO) + LONGSIZE)	/* 34 */
-#define GDB_FR_BADVADDR		((GDB_FR_HI) + LONGSIZE)	/* 35 */
-#define GDB_FR_CAUSE		((GDB_FR_BADVADDR) + LONGSIZE)	/* 36 */
-#define GDB_FR_EPC		((GDB_FR_CAUSE) + LONGSIZE)	/* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0		((GDB_FR_EPC) + LONGSIZE)	/* 38 */
-#define GDB_FR_FPR1		((GDB_FR_FPR0) + LONGSIZE)	/* 39 */
-#define GDB_FR_FPR2		((GDB_FR_FPR1) + LONGSIZE)	/* 40 */
-#define GDB_FR_FPR3		((GDB_FR_FPR2) + LONGSIZE)	/* 41 */
-#define GDB_FR_FPR4		((GDB_FR_FPR3) + LONGSIZE)	/* 42 */
-#define GDB_FR_FPR5		((GDB_FR_FPR4) + LONGSIZE)	/* 43 */
-#define GDB_FR_FPR6		((GDB_FR_FPR5) + LONGSIZE)	/* 44 */
-#define GDB_FR_FPR7		((GDB_FR_FPR6) + LONGSIZE)	/* 45 */
-#define GDB_FR_FPR8		((GDB_FR_FPR7) + LONGSIZE)	/* 46 */
-#define GDB_FR_FPR9		((GDB_FR_FPR8) + LONGSIZE)	/* 47 */
-#define GDB_FR_FPR10		((GDB_FR_FPR9) + LONGSIZE)	/* 48 */
-#define GDB_FR_FPR11		((GDB_FR_FPR10) + LONGSIZE)	/* 49 */
-#define GDB_FR_FPR12		((GDB_FR_FPR11) + LONGSIZE)	/* 50 */
-#define GDB_FR_FPR13		((GDB_FR_FPR12) + LONGSIZE)	/* 51 */
-#define GDB_FR_FPR14		((GDB_FR_FPR13) + LONGSIZE)	/* 52 */
-#define GDB_FR_FPR15		((GDB_FR_FPR14) + LONGSIZE)	/* 53 */
-#define GDB_FR_FPR16		((GDB_FR_FPR15) + LONGSIZE)	/* 54 */
-#define GDB_FR_FPR17		((GDB_FR_FPR16) + LONGSIZE)	/* 55 */
-#define GDB_FR_FPR18		((GDB_FR_FPR17) + LONGSIZE)	/* 56 */
-#define GDB_FR_FPR19		((GDB_FR_FPR18) + LONGSIZE)	/* 57 */
-#define GDB_FR_FPR20		((GDB_FR_FPR19) + LONGSIZE)	/* 58 */
-#define GDB_FR_FPR21		((GDB_FR_FPR20) + LONGSIZE)	/* 59 */
-#define GDB_FR_FPR22		((GDB_FR_FPR21) + LONGSIZE)	/* 60 */
-#define GDB_FR_FPR23		((GDB_FR_FPR22) + LONGSIZE)	/* 61 */
-#define GDB_FR_FPR24		((GDB_FR_FPR23) + LONGSIZE)	/* 62 */
-#define GDB_FR_FPR25		((GDB_FR_FPR24) + LONGSIZE)	/* 63 */
-#define GDB_FR_FPR26		((GDB_FR_FPR25) + LONGSIZE)	/* 64 */
-#define GDB_FR_FPR27		((GDB_FR_FPR26) + LONGSIZE)	/* 65 */
-#define GDB_FR_FPR28		((GDB_FR_FPR27) + LONGSIZE)	/* 66 */
-#define GDB_FR_FPR29		((GDB_FR_FPR28) + LONGSIZE)	/* 67 */
-#define GDB_FR_FPR30		((GDB_FR_FPR29) + LONGSIZE)	/* 68 */
-#define GDB_FR_FPR31		((GDB_FR_FPR30) + LONGSIZE)	/* 69 */
-
-#define GDB_FR_FSR		((GDB_FR_FPR31) + LONGSIZE)	/* 70 */
-#define GDB_FR_FIR		((GDB_FR_FSR) + LONGSIZE)	/* 71 */
-#define GDB_FR_FRP		((GDB_FR_FIR) + LONGSIZE)	/* 72 */
-
-#define GDB_FR_DUMMY		((GDB_FR_FRP) + LONGSIZE)	/* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX	((GDB_FR_DUMMY) + LONGSIZE)	/* 74 */
-#define GDB_FR_CP0_RANDOM	((GDB_FR_CP0_INDEX) + LONGSIZE)	/* 75 */
-#define GDB_FR_CP0_ENTRYLO0	((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1	((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT	((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK	((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED	((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7		((GDB_FR_CP0_WIRED) + LONGSIZE)	/* 81 */
-#define GDB_FR_CP0_REG8		((GDB_FR_CP0_REG7) + LONGSIZE)	/* 82 */
-#define GDB_FR_CP0_REG9		((GDB_FR_CP0_REG8) + LONGSIZE)	/* 83 */
-#define GDB_FR_CP0_ENTRYHI	((GDB_FR_CP0_REG9) + LONGSIZE)	/* 84 */
-#define GDB_FR_CP0_REG11	((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12	((GDB_FR_CP0_REG11) + LONGSIZE)	/* 86 */
-#define GDB_FR_CP0_REG13	((GDB_FR_CP0_REG12) + LONGSIZE)	/* 87 */
-#define GDB_FR_CP0_REG14	((GDB_FR_CP0_REG13) + LONGSIZE)	/* 88 */
-#define GDB_FR_CP0_PRID		((GDB_FR_CP0_REG14) + LONGSIZE)	/* 89 */
-
-#define GDB_FR_SIZE		((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-	/*
-	 * Pad bytes for argument save space on the stack
-	 * 24/48 Bytes for 32/64 bit code
-	 */
-	unsigned long pad0[6];
-
-	/*
-	 * saved main processor registers
-	 */
-	long	 reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
-	long	 reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
-	long	reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
-	long	reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
-	/*
-	 * Saved special registers
-	 */
-	long	cp0_status;
-	long	lo;
-	long	hi;
-	long	cp0_badvaddr;
-	long	cp0_cause;
-	long	cp0_epc;
-
-	/*
-	 * Saved floating point registers
-	 */
-	long	fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
-	long	fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
-	long	fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
-	long	fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
-	long	cp1_fsr;
-	long	cp1_fir;
-
-	/*
-	 * Frame pointer
-	 */
-	long	frame_ptr;
-	long    dummy;		/* unused */
-
-	/*
-	 * saved cp0 registers
-	 */
-	long	cp0_index;
-	long	cp0_random;
-	long	cp0_entrylo0;
-	long	cp0_entrylo1;
-	long	cp0_context;
-	long	cp0_pagemask;
-	long	cp0_wired;
-	long	cp0_reg7;
-	long	cp0_reg8;
-	long	cp0_reg9;
-	long	cp0_entryhi;
-	long	cp0_reg11;
-	long	cp0_reg12;
-	long	cp0_reg13;
-	long	cp0_reg14;
-	long	cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h
index 6ece1b037665..5bf62aafc890 100644
--- a/include/asm-mips/kdebug.h
+++ b/include/asm-mips/kdebug.h
@@ -1 +1,13 @@
-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_FP,
+	DIE_TRAP,
+	DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h
new file mode 100644
index 000000000000..48223b09396c
--- /dev/null
+++ b/include/asm-mips/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX			2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES		(90*sizeof(u32))
+#define NUMCRITREGBYTES		(12*sizeof(u32))
+#else
+#define NUMREGBYTES		(90*sizeof(u64))
+#define NUMCRITREGBYTES		(12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif				/* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/include/asm-mips/kvm.h b/include/asm-mips/kvm.h
deleted file mode 100644
index 093a5b7f796b..000000000000
--- a/include/asm-mips/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_MIPS_H
-#define __LINUX_KVM_MIPS_H
-
-/* mips does not support KVM */
-
-#endif
diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h
index 40e6c489833a..08e1958e9410 100644
--- a/include/asm-mips/mach-au1x00/au1550_spi.h
+++ b/include/asm-mips/mach-au1x00/au1550_spi.h
@@ -6,7 +6,6 @@
 #define _AU1550_SPI_H_
 
 struct au1550_spi_info {
-	s16 bus_num;		/* defines which PSC and IRQ to use */
 	u32 mainclk_hz;		/* main input clock frequency of PSC */
 	u16 num_chipselect;	/* number of chipselects supported */
 	void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h
index e6b376bd9d06..b4e70208da64 100644
--- a/include/asm-mips/mach-generic/gpio.h
+++ b/include/asm-mips/mach-generic/gpio.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_GENERIC_GPIO_H
 #define __ASM_MACH_GENERIC_GPIO_H
 
-#ifdef CONFIG_HAVE_GPIO_LIB
+#ifdef CONFIG_GPIOLIB
 #define gpio_get_value	__gpio_get_value
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index 0f6c251f5fec..73008f7bdc93 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -19,14 +19,6 @@
 #include <linux/stddef.h>
 #include <asm/processor.h>
 
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	6
-# endif
-#endif
-
 static __inline__ int ide_probe_legacy(void)
 {
 #ifdef CONFIG_PCI
@@ -56,46 +48,6 @@ found:
 #endif
 }
 
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		case 0x1e0: return 8;
-		case 0x160: return 12;
-		default:
-			return 0;
-	}
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	if (!ide_probe_legacy())
-		return 0;
-	/*
-	 *      If PCI is present then it is not safe to poke around
-	 *      the other legacy IDE ports. Only 0x1f0 and 0x170 are
-	 *      defined compatibility mode ports for PCI. A user can
-	 *      override this using ide= but we must default safe.
-	 */
-	if (no_pci_devices()) {
-		switch (index) {
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		case 4: return 0x1e0;
-		case 5: return 0x160;
-		}
-	}
-	switch (index) {
-	case 0: return 0x1f0;
-	case 1: return 0x170;
-	default:
-		return 0;
-	}
-}
-
 /* MIPS port and memory-mapped I/O string operations.  */
 static inline void __ide_flush_prologue(void)
 {
diff --git a/include/asm-mips/mach-rc32434/cpu-feature-overrides.h b/include/asm-mips/mach-rc32434/cpu-feature-overrides.h
new file mode 100644
index 000000000000..f3bc7efa2608
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/cpu-feature-overrides.h
@@ -0,0 +1,81 @@
+/*
+ *  IDT RC32434 specific CPU feature overrides
+ *
+ *  Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+#ifndef __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The IDT RC32434 SOC has a built-in MIPS 4Kc core.
+ */
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_tx39_cache		0
+#define cpu_has_sb1_cache		0
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_divec			1
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			1
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+
+#define cpu_has_vtag_icache		0
+/* #define cpu_has_dc_aliases		? */
+/* #define cpu_has_ic_fills_f_dc	? */
+/* #define cpu_has_pindexed_dcache	? */
+
+/* #define cpu_icache_snoops_remote_store	? */
+
+#define cpu_has_mips32r1		1
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+
+/* #define cpu_has_nofpuex		? */
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+#define cpu_has_64bit_gp_regs		0
+#define cpu_has_64bit_addresses		0
+
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+
+#endif /* __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-rc32434/ddr.h b/include/asm-mips/mach-rc32434/ddr.h
new file mode 100644
index 000000000000..291e2cf9dde0
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/ddr.h
@@ -0,0 +1,141 @@
+/*
+ *  Definitions for the DDR registers
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _ASM_RC32434_DDR_H_
+#define _ASM_RC32434_DDR_H_
+
+#include <asm/mach-rc32434/rb.h>
+
+/* DDR register structure */
+struct ddr_ram {
+	u32 ddrbase;
+	u32 ddrmask;
+	u32 res1;
+	u32 res2;
+	u32 ddrc;
+	u32 ddrabase;
+	u32 ddramask;
+	u32 ddramap;
+	u32 ddrcust;
+	u32 ddrrdc;
+	u32 ddrspare;
+};
+
+#define DDR0_PHYS_ADDR		0x18018000
+
+/* DDR banks masks */
+#define DDR_MASK		0xffff0000
+#define DDR0_BASE_MSK		DDR_MASK
+#define DDR1_BASE_MSK		DDR_MASK
+
+/* DDR bank0 registers */
+#define RC32434_DDR0_ATA_BIT		5
+#define RC32434_DDR0_ATA_MSK		0x000000E0
+#define RC32434_DDR0_DBW_BIT		8
+#define RC32434_DDR0_DBW_MSK		0x00000100
+#define RC32434_DDR0_WR_BIT		9
+#define RC32434_DDR0_WR_MSK		0x00000600
+#define RC32434_DDR0_PS_BIT		11
+#define RC32434_DDR0_PS_MSK		0x00001800
+#define RC32434_DDR0_DTYPE_BIT		13
+#define RC32434_DDR0_DTYPE_MSK		0x0000e000
+#define RC32434_DDR0_RFC_BIT		16
+#define RC32434_DDR0_RFC_MSK		0x000f0000
+#define RC32434_DDR0_RP_BIT		20
+#define RC32434_DDR0_RP_MSK		0x00300000
+#define RC32434_DDR0_AP_BIT		22
+#define RC32434_DDR0_AP_MSK		0x00400000
+#define RC32434_DDR0_RCD_BIT		23
+#define RC32434_DDR0_RCD_MSK		0x01800000
+#define RC32434_DDR0_CL_BIT		25
+#define RC32434_DDR0_CL_MSK		0x06000000
+#define RC32434_DDR0_DBM_BIT		27
+#define RC32434_DDR0_DBM_MSK		0x08000000
+#define RC32434_DDR0_SDS_BIT		28
+#define RC32434_DDR0_SDS_MSK		0x10000000
+#define RC32434_DDR0_ATP_BIT		29
+#define RC32434_DDR0_ATP_MSK		0x60000000
+#define RC32434_DDR0_RE_BIT		31
+#define RC32434_DDR0_RE_MSK		0x80000000
+
+/* DDR bank C registers */
+#define RC32434_DDRC_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DDRC_CES_BIT		0
+#define RC32434_DDRC_ACE_BIT		1
+
+/* Custom DDR bank registers */
+#define RC32434_DCST_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DCST_CS_BIT		0
+#define RC32434_DCST_CS_MSK		0x00000003
+#define RC32434_DCST_WE_BIT		2
+#define RC32434_DCST_RAS_BIT		3
+#define RC32434_DCST_CAS_BIT		4
+#define RC32434_DSCT_CKE_BIT		5
+#define RC32434_DSCT_BA_BIT		6
+#define RC32434_DSCT_BA_MSK		0x000000c0
+
+/* DDR QSC registers */
+#define RC32434_QSC_DM_BIT		0
+#define RC32434_QSC_DM_MSK		0x00000003
+#define RC32434_QSC_DQSBS_BIT		2
+#define RC32434_QSC_DQSBS_MSK		0x000000fc
+#define RC32434_QSC_DB_BIT		8
+#define RC32434_QSC_DB_MSK		0x00000100
+#define RC32434_QSC_DBSP_BIT		9
+#define RC32434_QSC_DBSP_MSK		0x01fffe00
+#define RC32434_QSC_BDP_BIT		25
+#define RC32434_QSC_BDP_MSK		0x7e000000
+
+/* DDR LLC registers */
+#define RC32434_LLC_EAO_BIT		0
+#define RC32434_LLC_EAO_MSK		0x00000001
+#define RC32434_LLC_EO_BIT		1
+#define RC32434_LLC_EO_MSK		0x0000003e
+#define RC32434_LLC_FS_BIT		6
+#define RC32434_LLC_FS_MSK		0x000000c0
+#define RC32434_LLC_AS_BIT		8
+#define RC32434_LLC_AS_MSK		0x00000700
+#define RC32434_LLC_SP_BIT		11
+#define RC32434_LLC_SP_MSK		0x001ff800
+
+/* DDR LLFC registers */
+#define RC32434_LLFC_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_LLFC_MEN_BIT		0
+#define RC32434_LLFC_EAN_BIT		1
+#define RC32434_LLFC_FF_BIT		2
+
+/* DDR DLLTA registers */
+#define RC32434_DLLTA_ADDR_BIT		2
+#define RC32434_DLLTA_ADDR_MSK		0xfffffffc
+
+/* DDR DLLED registers */
+#define RC32434_DLLED_MSK(x)		BIT_TO_MASK(x)
+#define RC32434_DLLED_DBE_BIT		0
+#define RC32434_DLLED_DTE_BIT		1
+
+#endif  /* _ASM_RC32434_DDR_H_ */
diff --git a/include/asm-mips/mach-rc32434/dma.h b/include/asm-mips/mach-rc32434/dma.h
new file mode 100644
index 000000000000..5f898b5873f7
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/dma.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *		All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ */
+
+#ifndef __ASM_RC32434_DMA_H
+#define __ASM_RC32434_DMA_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define DMA0_BASE_ADDR			0x18040000
+
+/*
+ * DMA descriptor (in physical memory).
+ */
+
+struct dma_desc {
+	u32 control;			/* Control. use DMAD_* */
+	u32 ca;				/* Current Address. */
+	u32 devcs;			/* Device control and status. */
+	u32 link;			/* Next descriptor in chain. */
+};
+
+#define DMA_DESC_SIZ			sizeof(struct dma_desc)
+#define DMA_DESC_COUNT_BIT		0
+#define DMA_DESC_COUNT_MSK		0x0003ffff
+#define DMA_DESC_DS_BIT			20
+#define DMA_DESC_DS_MSK			0x00300000
+
+#define DMA_DESC_DEV_CMD_BIT		22
+#define DMA_DESC_DEV_CMD_MSK		0x01c00000
+
+/* DMA command sizes */
+#define DMA_DESC_DEV_CMD_BYTE		0
+#define DMA_DESC_DEV_CMD_HLF_WD		1
+#define DMA_DESC_DEV_CMD_WORD		2
+#define DMA_DESC_DEV_CMD_2WORDS		3
+#define DMA_DESC_DEV_CMD_4WORDS		4
+#define DMA_DESC_DEV_CMD_6WORDS		5
+#define DMA_DESC_DEV_CMD_8WORDS		6
+#define DMA_DESC_DEV_CMD_16WORDS	7
+
+/* DMA descriptors interrupts */
+#define DMA_DESC_COF			(1 << 25) /* Chain on finished */
+#define DMA_DESC_COD			(1 << 26) /* Chain on done */
+#define DMA_DESC_IOF			(1 << 27) /* Interrupt on finished */
+#define DMA_DESC_IOD			(1 << 28) /* Interrupt on done */
+#define DMA_DESC_TERM			(1 << 29) /* Terminated */
+#define DMA_DESC_DONE			(1 << 30) /* Done */
+#define DMA_DESC_FINI			(1 << 31) /* Finished */
+
+/*
+ * DMA register (within Internal Register Map).
+ */
+
+struct dma_reg {
+	u32 dmac;		/* Control. */
+	u32 dmas;		/* Status. */
+	u32 dmasm;		/* Mask. */
+	u32 dmadptr;		/* Descriptor pointer. */
+	u32 dmandptr;		/* Next descriptor pointer. */
+};
+
+/* DMA channels specific registers */
+#define DMA_CHAN_RUN_BIT		(1 << 0)
+#define DMA_CHAN_DONE_BIT		(1 << 1)
+#define DMA_CHAN_MODE_BIT		(1 << 2)
+#define DMA_CHAN_MODE_MSK		0x0000000c
+#define  DMA_CHAN_MODE_AUTO		0
+#define  DMA_CHAN_MODE_BURST		1
+#define  DMA_CHAN_MODE_XFRT		2
+#define  DMA_CHAN_MODE_RSVD		3
+#define DMA_CHAN_ACT_BIT		(1 << 4)
+
+/* DMA status registers */
+#define DMA_STAT_FINI			(1 << 0)
+#define DMA_STAT_DONE			(1 << 1)
+#define DMA_STAT_CHAIN			(1 << 2)
+#define DMA_STAT_ERR			(1 << 3)
+#define DMA_STAT_HALT			(1 << 4)
+
+/*
+ * DMA channel definitions
+ */
+
+#define DMA_CHAN_ETH_RCV		0
+#define DMA_CHAN_ETH_XMT		1
+#define DMA_CHAN_MEM_TO_FIFO		2
+#define DMA_CHAN_FIFO_TO_MEM		3
+#define DMA_CHAN_PCI_TO_MEM		4
+#define DMA_CHAN_MEM_TO_PCI		5
+#define DMA_CHAN_COUNT			6
+
+struct dma_channel {
+	struct dma_reg ch[DMA_CHAN_COUNT];
+};
+
+#endif  /* __ASM_RC32434_DMA_H */
diff --git a/include/asm-mips/mach-rc32434/dma_v.h b/include/asm-mips/mach-rc32434/dma_v.h
new file mode 100644
index 000000000000..173a9f9146cd
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/dma_v.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *		All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ */
+
+#ifndef _ASM_RC32434_DMA_V_H_
+#define _ASM_RC32434_DMA_V_H_
+
+#include  <asm/mach-rc32434/dma.h>
+#include  <asm/mach-rc32434/rc32434.h>
+
+#define DMA_CHAN_OFFSET		0x14
+#define IS_DMA_USED(X)		(((X) & \
+				(DMA_DESC_FINI | DMA_DESC_DONE | DMA_DESC_TERM)) \
+				!= 0)
+#define DMA_COUNT(count)	((count) & DMA_DESC_COUNT_MSK)
+
+#define DMA_HALT_TIMEOUT	500
+
+static inline int rc32434_halt_dma(struct dma_reg *ch)
+{
+	int timeout = 1;
+	if (__raw_readl(&ch->dmac) & DMA_CHAN_RUN_BIT) {
+		__raw_writel(0, &ch->dmac);
+		for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
+			if (__raw_readl(&ch->dmas) & DMA_STAT_HALT) {
+				__raw_writel(0, &ch->dmas);
+				break;
+			}
+		}
+	}
+
+	return timeout ? 0 : 1;
+}
+
+static inline void rc32434_start_dma(struct dma_reg *ch, u32 dma_addr)
+{
+	__raw_writel(0, &ch->dmandptr);
+	__raw_writel(dma_addr, &ch->dmadptr);
+}
+
+static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr)
+{
+	__raw_writel(dma_addr, &ch->dmandptr);
+}
+
+#endif  /* _ASM_RC32434_DMA_V_H_ */
diff --git a/include/asm-mips/mach-rc32434/eth.h b/include/asm-mips/mach-rc32434/eth.h
new file mode 100644
index 000000000000..a25cbc56173d
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/eth.h
@@ -0,0 +1,220 @@
+/*
+ *  Definitions for the Ethernet registers
+ *
+ *  Copyright 2002 Allend Stichter <allen.stichter@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef	__ASM_RC32434_ETH_H
+#define	__ASM_RC32434_ETH_H
+
+
+#define ETH0_BASE_ADDR		0x18060000
+
+struct eth_regs {
+	u32 ethintfc;
+	u32 ethfifott;
+	u32 etharc;
+	u32 ethhash0;
+	u32 ethhash1;
+	u32 ethu0[4];		/* Reserved. */
+	u32 ethpfs;
+	u32 ethmcp;
+	u32 eth_u1[10];		/* Reserved. */
+	u32 ethspare;
+	u32 eth_u2[42];		/* Reserved. */
+	u32 ethsal0;
+	u32 ethsah0;
+	u32 ethsal1;
+	u32 ethsah1;
+	u32 ethsal2;
+	u32 ethsah2;
+	u32 ethsal3;
+	u32 ethsah3;
+	u32 ethrbc;
+	u32 ethrpc;
+	u32 ethrupc;
+	u32 ethrfc;
+	u32 ethtbc;
+	u32 ethgpf;
+	u32 eth_u9[50];		/* Reserved. */
+	u32 ethmac1;
+	u32 ethmac2;
+	u32 ethipgt;
+	u32 ethipgr;
+	u32 ethclrt;
+	u32 ethmaxf;
+	u32 eth_u10;		/* Reserved. */
+	u32 ethmtest;
+	u32 miimcfg;
+	u32 miimcmd;
+	u32 miimaddr;
+	u32 miimwtd;
+	u32 miimrdd;
+	u32 miimind;
+	u32 eth_u11;		/* Reserved. */
+	u32 eth_u12;		/* Reserved. */
+	u32 ethcfsa0;
+	u32 ethcfsa1;
+	u32 ethcfsa2;
+};
+
+/* Ethernet interrupt registers */
+#define ETH_INT_FC_EN		(1 << 0)
+#define ETH_INT_FC_ITS		(1 << 1)
+#define ETH_INT_FC_RIP		(1 << 2)
+#define ETH_INT_FC_JAM		(1 << 3)
+#define ETH_INT_FC_OVR		(1 << 4)
+#define ETH_INT_FC_UND		(1 << 5)
+#define ETH_INT_FC_IOC		0x000000c0
+
+/* Ethernet FIFO registers */
+#define ETH_FIFI_TT_TTH_BIT	0
+#define ETH_FIFO_TT_TTH		0x0000007f
+
+/* Ethernet ARC/multicast registers */
+#define ETH_ARC_PRO		(1 << 0)
+#define ETH_ARC_AM		(1 << 1)
+#define ETH_ARC_AFM		(1 << 2)
+#define ETH_ARC_AB		(1 << 3)
+
+/* Ethernet SAL registers */
+#define ETH_SAL_BYTE_5		0x000000ff
+#define ETH_SAL_BYTE_4		0x0000ff00
+#define ETH_SAL_BYTE_3		0x00ff0000
+#define ETH_SAL_BYTE_2		0xff000000
+
+/* Ethernet SAH registers */
+#define ETH_SAH_BYTE1		0x000000ff
+#define ETH_SAH_BYTE0		0x0000ff00
+
+/* Ethernet GPF register */
+#define ETH_GPF_PTV		0x0000ffff
+
+/* Ethernet PFG register */
+#define ETH_PFS_PFD		(1 << 0)
+
+/* Ethernet CFSA[0-3] registers */
+#define ETH_CFSA0_CFSA4		0x000000ff
+#define ETH_CFSA0_CFSA5		0x0000ff00
+#define ETH_CFSA1_CFSA2		0x000000ff
+#define ETH_CFSA1_CFSA3		0x0000ff00
+#define ETH_CFSA1_CFSA0		0x000000ff
+#define ETH_CFSA1_CFSA1		0x0000ff00
+
+/* Ethernet MAC1 registers */
+#define ETH_MAC1_RE		(1 << 0)
+#define ETH_MAC1_PAF		(1 << 1)
+#define ETH_MAC1_RFC		(1 << 2)
+#define ETH_MAC1_TFC		(1 << 3)
+#define ETH_MAC1_LB		(1 << 4)
+#define ETH_MAC1_MR		(1 << 31)
+
+/* Ethernet MAC2 registers */
+#define ETH_MAC2_FD		(1 << 0)
+#define ETH_MAC2_FLC		(1 << 1)
+#define ETH_MAC2_HFE		(1 << 2)
+#define ETH_MAC2_DC		(1 << 3)
+#define ETH_MAC2_CEN		(1 << 4)
+#define ETH_MAC2_PE		(1 << 5)
+#define ETH_MAC2_VPE		(1 << 6)
+#define ETH_MAC2_APE		(1 << 7)
+#define ETH_MAC2_PPE		(1 << 8)
+#define ETH_MAC2_LPE		(1 << 9)
+#define ETH_MAC2_NB		(1 << 12)
+#define ETH_MAC2_BP		(1 << 13)
+#define ETH_MAC2_ED		(1 << 14)
+
+/* Ethernet IPGT register */
+#define ETH_IPGT		0x0000007f
+
+/* Ethernet IPGR registers */
+#define ETH_IPGR_IPGR2		0x0000007f
+#define ETH_IPGR_IPGR1		0x00007f00
+
+/* Ethernet CLRT registers */
+#define ETH_CLRT_MAX_RET	0x0000000f
+#define ETH_CLRT_COL_WIN	0x00003f00
+
+/* Ethernet MAXF register */
+#define ETH_MAXF		0x0000ffff
+
+/* Ethernet test registers */
+#define ETH_TEST_REG		(1 << 2)
+#define ETH_MCP_DIV		0x000000ff
+
+/* MII registers */
+#define ETH_MII_CFG_RSVD	0x0000000c
+#define ETH_MII_CMD_RD		(1 << 0)
+#define ETH_MII_CMD_SCN		(1 << 1)
+#define ETH_MII_REG_ADDR	0x0000001f
+#define ETH_MII_PHY_ADDR	0x00001f00
+#define ETH_MII_WTD_DATA	0x0000ffff
+#define ETH_MII_RDD_DATA	0x0000ffff
+#define ETH_MII_IND_BSY		(1 << 0)
+#define ETH_MII_IND_SCN		(1 << 1)
+#define ETH_MII_IND_NV		(1 << 2)
+
+/*
+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
+ */
+
+#define ETH_RX_FD		(1 << 0)
+#define ETH_RX_LD		(1 << 1)
+#define ETH_RX_ROK		(1 << 2)
+#define ETH_RX_FM		(1 << 3)
+#define ETH_RX_MP		(1 << 4)
+#define ETH_RX_BP		(1 << 5)
+#define ETH_RX_VLT		(1 << 6)
+#define ETH_RX_CF		(1 << 7)
+#define ETH_RX_OVR		(1 << 8)
+#define ETH_RX_CRC		(1 << 9)
+#define ETH_RX_CV		(1 << 10)
+#define ETH_RX_DB		(1 << 11)
+#define ETH_RX_LE		(1 << 12)
+#define ETH_RX_LOR		(1 << 13)
+#define ETH_RX_CES		(1 << 14)
+#define ETH_RX_LEN_BIT		16
+#define ETH_RX_LEN		0xffff0000
+
+#define ETH_TX_FD		(1 << 0)
+#define ETH_TX_LD		(1 << 1)
+#define ETH_TX_OEN		(1 << 2)
+#define ETH_TX_PEN		(1 << 3)
+#define ETH_TX_CEN		(1 << 4)
+#define ETH_TX_HEN		(1 << 5)
+#define ETH_TX_TOK		(1 << 6)
+#define ETH_TX_MP		(1 << 7)
+#define ETH_TX_BP		(1 << 8)
+#define ETH_TX_UND		(1 << 9)
+#define ETH_TX_OF		(1 << 10)
+#define ETH_TX_ED		(1 << 11)
+#define ETH_TX_EC		(1 << 12)
+#define ETH_TX_LC		(1 << 13)
+#define ETH_TX_TD		(1 << 14)
+#define ETH_TX_CRC		(1 << 15)
+#define ETH_TX_LE		(1 << 16)
+#define ETH_TX_CC		0x001E0000
+
+#endif  /* __ASM_RC32434_ETH_H */
diff --git a/include/asm-mips/mach-rc32434/gpio.h b/include/asm-mips/mach-rc32434/gpio.h
new file mode 100644
index 000000000000..f946f5f45bbb
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/gpio.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *	All rights reserved.
+ *
+ * GPIO register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#ifndef _RC32434_GPIO_H_
+#define _RC32434_GPIO_H_
+
+#include <linux/types.h>
+
+struct rb532_gpio_reg {
+	u32   gpiofunc;   /* GPIO Function Register
+			   * gpiofunc[x]==0 bit = gpio
+			   * func[x]==1  bit = altfunc
+			   */
+	u32   gpiocfg;	  /* GPIO Configuration Register
+			   * gpiocfg[x]==0 bit = input
+			   * gpiocfg[x]==1 bit = output
+			   */
+	u32   gpiod;	  /* GPIO Data Register
+			   * gpiod[x] read/write gpio pinX status
+			   */
+	u32   gpioilevel; /* GPIO Interrupt Status Register
+			   * interrupt level (see gpioistat)
+			   */
+	u32   gpioistat;  /* Gpio Interrupt Status Register
+			   * istat[x] = (gpiod[x] == level[x])
+			   * cleared in ISR (STICKY bits)
+			   */
+	u32   gpionmien;  /* GPIO Non-maskable Interrupt Enable Register */
+};
+
+/* UART GPIO signals */
+#define RC32434_UART0_SOUT	(1 << 0)
+#define RC32434_UART0_SIN	(1 << 1)
+#define RC32434_UART0_RTS	(1 << 2)
+#define RC32434_UART0_CTS	(1 << 3)
+
+/* M & P bus GPIO signals */
+#define RC32434_MP_BIT_22	(1 << 4)
+#define RC32434_MP_BIT_23	(1 << 5)
+#define RC32434_MP_BIT_24	(1 << 6)
+#define RC32434_MP_BIT_25	(1 << 7)
+
+/* CPU GPIO signals */
+#define RC32434_CPU_GPIO	(1 << 8)
+
+/* Reserved GPIO signals */
+#define RC32434_AF_SPARE_6	(1 << 9)
+#define RC32434_AF_SPARE_4	(1 << 10)
+#define RC32434_AF_SPARE_3	(1 << 11)
+#define RC32434_AF_SPARE_2	(1 << 12)
+
+/* PCI messaging unit */
+#define RC32434_PCI_MSU_GPIO	(1 << 13)
+
+
+extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
+extern unsigned get_434_reg(unsigned reg_offs);
+extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
+extern unsigned char get_latch_u5(void);
+
+extern int rb532_gpio_get_value(unsigned gpio);
+extern void rb532_gpio_set_value(unsigned gpio, int value);
+extern int rb532_gpio_direction_input(unsigned gpio);
+extern int rb532_gpio_direction_output(unsigned gpio, int value);
+extern void rb532_gpio_set_int_level(unsigned gpio, int value);
+extern int rb532_gpio_get_int_level(unsigned gpio);
+extern void rb532_gpio_set_int_status(unsigned gpio, int value);
+extern int rb532_gpio_get_int_status(unsigned gpio);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	/* Not yet implemented */
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	/* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return rb532_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return rb532_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return rb532_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	rb532_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _RC32434_GPIO_H_ */
diff --git a/include/asm-mips/mach-rc32434/integ.h b/include/asm-mips/mach-rc32434/integ.h
new file mode 100644
index 000000000000..fa65bc3d8807
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/integ.h
@@ -0,0 +1,59 @@
+/*
+ *  Definitions for the Watchdog registers
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __RC32434_INTEG_H__
+#define __RC32434_INTEG_H__
+
+#include <asm/mach-rc32434/rb.h>
+
+#define INTEG0_BASE_ADDR	0x18030030
+
+struct integ {
+	u32 errcs;			/* sticky use ERRCS_ */
+	u32 wtcount;			/* Watchdog timer count reg. */
+	u32 wtcompare;			/* Watchdog timer timeout value. */
+	u32 wtc;			/* Watchdog timer control. use WTC_ */
+};
+
+/* Error counters */
+#define RC32434_ERR_WTO		0
+#define RC32434_ERR_WNE		1
+#define RC32434_ERR_UCW		2
+#define RC32434_ERR_UCR		3
+#define RC32434_ERR_UPW		4
+#define RC32434_ERR_UPR		5
+#define RC32434_ERR_UDW		6
+#define RC32434_ERR_UDR		7
+#define RC32434_ERR_SAE		8
+#define RC32434_ERR_WRE		9
+
+/* Watchdog control bits */
+#define RC32434_WTC_EN		0
+#define RC32434_WTC_TO		1
+
+#endif	/* __RC32434_INTEG_H__ */
diff --git a/include/asm-mips/mach-rc32434/irq.h b/include/asm-mips/mach-rc32434/irq.h
new file mode 100644
index 000000000000..cb9e4725f5dc
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/irq.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_RC32434_IRQ_H
+#define __ASM_RC32434_IRQ_H
+
+#define NR_IRQS	256
+
+#include <asm/mach-generic/irq.h>
+
+#endif  /* __ASM_RC32434_IRQ_H */
diff --git a/include/asm-mips/mach-rc32434/pci.h b/include/asm-mips/mach-rc32434/pci.h
new file mode 100644
index 000000000000..410638f2af74
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/pci.h
@@ -0,0 +1,481 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ * Initial Release
+ */
+
+#ifndef _ASM_RC32434_PCI_H_
+#define _ASM_RC32434_PCI_H_
+
+#define epld_mask ((volatile unsigned char *)0xB900000d)
+
+#define PCI0_BASE_ADDR		0x18080000
+#define PCI_LBA_COUNT		4
+
+struct pci_map {
+	u32 address;		/* Address. */
+	u32 control;		/* Control. */
+	u32 mapping;		/* mapping. */
+};
+
+struct pci_reg {
+	u32 pcic;
+	u32 pcis;
+	u32 pcism;
+	u32 pcicfga;
+	u32 pcicfgd;
+	volatile struct pci_map pcilba[PCI_LBA_COUNT];
+	u32 pcidac;
+	u32 pcidas;
+	u32 pcidasm;
+	u32 pcidad;
+	u32 pcidma8c;
+	u32 pcidma9c;
+	u32 pcitc;
+};
+
+#define PCI_MSU_COUNT		2
+
+struct pci_msu {
+	u32 pciim[PCI_MSU_COUNT];
+	u32 pciom[PCI_MSU_COUNT];
+	u32 pciid;
+	u32 pciiic;
+	u32 pciiim;
+	u32 pciiod;
+	u32 pciioic;
+	u32 pciioim;
+};
+
+/*
+ * PCI Control Register
+ */
+
+#define PCI_CTL_EN		(1 << 0)
+#define PCI_CTL_TNR		(1 << 1)
+#define PCI_CTL_SCE		(1 << 2)
+#define PCI_CTL_IEN		(1 << 3)
+#define PCI_CTL_AAA		(1 << 4)
+#define PCI_CTL_EAP		(1 << 5)
+#define PCI_CTL_PCIM_BIT	6
+#define PCI_CTL_PCIM		0x000001c0
+
+#define PCI_CTL_PCIM_DIS	0
+#define PCI_CTL_PCIM_TNR	1 /* Satellite - target not ready */
+#define PCI_CTL_PCIM_SUS	2 /* Satellite - suspended CPU. */
+#define PCI_CTL_PCIM_EXT	3 /* Host - external arbiter. */
+#define PCI_CTL PCIM_PRIO	4 /* Host - fixed priority arb. */
+#define PCI_CTL_PCIM_RR		5 /* Host - round robin priority. */
+#define PCI_CTL_PCIM_RSVD6	6
+#define PCI_CTL_PCIM_RSVD7	7
+
+#define PCI_CTL_IGM		(1 << 9)
+
+/*
+ * PCI Status Register
+ */
+
+#define PCI_STAT_EED		(1 << 0)
+#define PCI_STAT_WR		(1 << 1)
+#define PCI_STAT_NMI		(1 << 2)
+#define PCI_STAT_II		(1 << 3)
+#define PCI_STAT_CWE		(1 << 4)
+#define PCI_STAT_CRE		(1 << 5)
+#define PCI_STAT_MDPE		(1 << 6)
+#define PCI_STAT_STA		(1 << 7)
+#define PCI_STAT_RTA		(1 << 8)
+#define PCI_STAT_RMA		(1 << 9)
+#define PCI_STAT_SSE		(1 << 10)
+#define PCI_STAT_OSE		(1 << 11)
+#define PCI_STAT_PE		(1 << 12)
+#define PCI_STAT_TAE		(1 << 13)
+#define PCI_STAT_RLE		(1 << 14)
+#define PCI_STAT_BME		(1 << 15)
+#define PCI_STAT_PRD		(1 << 16)
+#define PCI_STAT_RIP		(1 << 17)
+
+/*
+ * PCI Status Mask Register
+ */
+
+#define PCI_STATM_EED		PCI_STAT_EED
+#define PCI_STATM_WR		PCI_STAT_WR
+#define PCI_STATM_NMI		PCI_STAT_NMI
+#define PCI_STATM_II		PCI_STAT_II
+#define PCI_STATM_CWE		PCI_STAT_CWE
+#define PCI_STATM_CRE		PCI_STAT_CRE
+#define PCI_STATM_MDPE		PCI_STAT_MDPE
+#define PCI_STATM_STA		PCI_STAT_STA
+#define PCI_STATM_RTA		PCI_STAT_RTA
+#define PCI_STATM_RMA		PCI_STAT_RMA
+#define PCI_STATM_SSE		PCI_STAT_SSE
+#define PCI_STATM_OSE		PCI_STAT_OSE
+#define PCI_STATM_PE		PCI_STAT_PE
+#define PCI_STATM_TAE		PCI_STAT_TAE
+#define PCI_STATM_RLE		PCI_STAT_RLE
+#define PCI_STATM_BME		PCI_STAT_BME
+#define PCI_STATM_PRD		PCI_STAT_PRD
+#define PCI_STATM_RIP		PCI_STAT_RIP
+
+/*
+ * PCI Configuration Address Register
+ */
+#define PCI_CFGA_REG_BIT	2
+#define PCI_CFGA_REG		0x000000fc
+#define	 PCI_CFGA_REG_ID	(0x00 >> 2)	/* use PCFGID */
+#define	 PCI_CFGA_REG_04	(0x04 >> 2)	/* use PCFG04_ */
+#define	 PCI_CFGA_REG_08	(0x08 >> 2)	/* use PCFG08_ */
+#define	 PCI_CFGA_REG_0C	(0x0C >> 2)	/* use PCFG0C_ */
+#define	 PCI_CFGA_REG_PBA0	(0x10 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA1	(0x14 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA2	(0x18 >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_PBA3	(0x1c >> 2)	/* use PCIPBA_ */
+#define	 PCI_CFGA_REG_SUBSYS	(0x2c >> 2)	/* use PCFGSS_ */
+#define  PCI_CFGA_REG_3C	(0x3C >> 2)	/* use PCFG3C_ */
+#define	 PCI_CFGA_REG_PBBA0C	(0x44 >> 2)	/* use PCIPBAC_ */
+#define  PCI_CFGA_REG_PBA0M	(0x48 >> 2)
+#define	 PCI_CFGA_REG_PBA1C	(0x4c >> 2)	/* use PCIPBAC_ */
+#define  PCI_CFGA_REG_PBA1M	(0x50 >> 2)
+#define	 PCI_CFGA_REG_PBA2C	(0x54 >> 2)	/* use PCIPBAC_ */
+#define	 PCI_CFGA_REG_PBA2M	(0x58 >> 2)
+#define	 PCI_CFGA_REG_PBA3C	(0x5c >> 2)	/* use PCIPBAC_ */
+#define	 PCI_CFGA_REG_PBA3M	(0x60 >> 2)
+#define	 PCI_CFGA_REG_PMGT	(0x64 >> 2)
+#define PCI_CFGA_FUNC_BIT	8
+#define PCI_CFGA_FUNC		0x00000700
+#define PCI_CFGA_DEV_BIT	11
+#define	PCI_CFGA_DEV		0x0000f800
+#define	PCI_CFGA_DEV_INTERN	0
+#define	PCI_CFGA_BUS_BIT	16
+#define PCI CFGA_BUS		0x00ff0000
+#define PCI_CFGA_BUS_TYPE0	0
+#define PCI_CFGA_EN		(1 << 31)
+
+/* PCI CFG04 commands */
+#define PCI_CFG04_CMD_IO_ENA	(1 << 0)
+#define PCI_CFG04_CMD_MEM_ENA	(1 << 1)
+#define PCI_CFG04_CMD_BM_ENA	(1 << 2)
+#define PCI_CFG04_CMD_MW_INV	(1 << 4)
+#define PCI_CFG04_CMD_PAR_ENA	(1 << 6)
+#define PCI_CFG04_CMD_SER_ENA	(1 << 8)
+#define PCI_CFG04_CMD_FAST_ENA	(1 << 9)
+
+/* PCI CFG04 status fields */
+#define PCI_CFG04_STAT_BIT	16
+#define PCI_CFG04_STAT		0xffff0000
+#define PCI_CFG04_STAT_66_MHZ	(1 << 21)
+#define PCI_CFG04_STAT_FBB	(1 << 23)
+#define PCI_CFG04_STAT_MDPE	(1 << 24)
+#define PCI_CFG04_STAT_DST	(1 << 25)
+#define PCI_CFG04_STAT_STA	(1 << 27)
+#define PCI_CFG04_STAT_RTA	(1 << 28)
+#define PCI_CFG04_STAT_RMA	(1 << 29)
+#define PCI_CFG04_STAT_SSE	(1 << 30)
+#define PCI_CFG04_STAT_PE	(1 << 31)
+
+#define PCI_PBA_MSI		(1 << 0)
+#define PCI_PBA_P		(1 << 2)
+
+/* PCI PBAC registers */
+#define PCI_PBAC_MSI		(1 << 0)
+#define PCI_PBAC_P		(1 << 1)
+#define PCI_PBAC_SIZE_BIT	2
+#define PCI_PBAC_SIZE		0x0000007c
+#define	PCI_PBAC_SB		(1 << 7)
+#define	PCI_PBAC_PP		(1 << 8)
+#define PCI_PBAC_MR_BIT		9
+#define PCI_PBAC_MR		0x00000600
+#define	 PCI_PBAC_MR_RD		0
+#define	 PCI_PBAC_MR_RD_LINE	1
+#define  PCI_PBAC_MR_RD_MULT	2
+#define PCI_PBAC_MRL		(1 << 11)
+#define PCI_PBAC_MRM		(1 << 12)
+#define PCI_PBAC_TRP		(1 << 13)
+
+#define PCI_CFG40_TRDY_TIM	0x000000ff
+#define PCI_CFG40_RET_LIM	0x0000ff00
+
+/*
+ * PCI Local Base Address [0|1|2|3] Register
+ */
+
+#define PCI_LBA_BADDR_BIT	0
+#define PCI_LBA_BADDR		0xffffff00
+
+/*
+ * PCI Local Base Address Control Register
+ */
+
+#define PCI_LBAC_MSI		(1 << 0)
+#define  PCI_LBAC_MSI_MEM	0
+#define  PCI_LBAC_MSI_IO	1
+#define PCI_LBAC_SIZE_BIT	2
+#define PCI_LBAC_SIZE		0x0000007c
+#define PCI_LBAC_SB		(1 << 7)
+#define PCI_LBAC_RT		(1 << 8)
+#define  PCI_LBAC_RT_NO_PREF	0
+#define  PCI_LBAC_RT_PREF	1
+
+/*
+ * PCI Local Base Address [0|1|2|3] Mapping Register
+ */
+#define PCI_LBAM_MADDR_BIT	8
+#define PCI_LBAM_MADDR		0xffffff00
+
+/*
+ * PCI Decoupled Access Control Register
+ */
+#define PCI_DAC_DEN		(1 << 0)
+
+/*
+ * PCI Decoupled Access Status Register
+ */
+#define PCI_DAS_D		(1 << 0)
+#define PCI_DAS_B		(1 << 1)
+#define PCI_DAS_E		(1 << 2)
+#define PCI_DAS_OFE		(1 << 3)
+#define PCI_DAS_OFF		(1 << 4)
+#define PCI_DAS_IFE		(1 << 5)
+#define PCI_DAS_IFF		(1 << 6)
+
+/*
+ * PCI DMA Channel 8 Configuration Register
+ */
+#define PCI_DMA8C_MBS_BIT	0
+#define PCI_DMA8C_MBS		0x00000fff /* Maximum Burst Size. */
+#define PCI_DMA8C_OUR		(1 << 12)
+
+/*
+ * PCI DMA Channel 9 Configuration Register
+ */
+#define PCI_DMA9C_MBS_BIT	0	/* Maximum Burst Size. */
+#define PCI_DMA9C_MBS		0x00000fff
+
+/*
+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
+ */
+
+#define PCI_DMAD_PT_BIT		22		/* in DEVCMD field (descriptor) */
+#define PCI_DMAD_PT		0x00c00000	/* preferred transaction field */
+/* These are for reads (DMA channel 8) */
+#define PCI_DMAD_DEVCMD_MR	0		/* memory read */
+#define	PCI_DMAD_DEVCMD_MRL	1		/* memory read line */
+#define	PCI_DMAD_DEVCMD_MRM	2		/* memory read multiple */
+#define	PCI_DMAD_DEVCMD_IOR	3		/* I/O read */
+/* These are for writes (DMA channel 9) */
+#define PCI_DMAD_DEVCMD_MW	0		/* memory write */
+#define	PCI_DMAD_DEVCMD_MWI	1		/* memory write invalidate */
+#define	PCI_DMAD_DEVCMD_IOW	3		/* I/O write */
+
+/* Swap byte field applies to both DMA channel 8 and 9 */
+#define	PCI_DMAD_SB		(1 << 24)	/* swap byte field */
+
+
+/*
+ * PCI Target Control Register
+ */
+
+#define PCI_TC_RTIMER_BIT	0
+#define PCI_TC_RTIMER		0x000000ff
+#define PCI_TC_DTIMER_BIT	8
+#define PCI_TC_DTIMER		0x0000ff00
+#define PCI_TC_RDR		(1 << 18)
+#define PCI_TC_DDT		(1 << 19)
+
+/*
+ * PCI messaging unit [applies to both inbound and outbound registers ]
+ */
+#define PCI_MSU_M0		(1 << 0)
+#define PCI_MSU_M1		(1 << 1)
+#define PCI_MSU_DB		(1 << 2)
+
+#define PCI_MSG_ADDR	     	0xB8088010
+#define PCI0_ADDR		0xB8080000
+#define rc32434_pci ((struct pci_reg *) PCI0_ADDR)
+#define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR)
+
+#define PCIM_SHFT		0x6
+#define PCIM_BIT_LEN		0x7
+#define PCIM_H_EA		0x3
+#define PCIM_H_IA_FIX		0x4
+#define PCIM_H_IA_RR		0x5
+#if 0
+#define PCI_ADDR_START		0x13000000
+#endif
+
+#define PCI_ADDR_START		0x50000000
+
+#define CPUTOPCI_MEM_WIN	0x02000000
+#define CPUTOPCI_IO_WIN		0x00100000
+#define PCILBA_SIZE_SHFT	2
+#define PCILBA_SIZE_MASK	0x1F
+#define SIZE_256MB		0x1C
+#define SIZE_128MB		0x1B
+#define SIZE_64MB               0x1A
+#define SIZE_32MB		0x19
+#define SIZE_16MB               0x18
+#define SIZE_4MB		0x16
+#define SIZE_2MB		0x15
+#define SIZE_1MB		0x14
+#define KORINA_CONFIG0_ADDR	0x80000000
+#define KORINA_CONFIG1_ADDR	0x80000004
+#define KORINA_CONFIG2_ADDR	0x80000008
+#define KORINA_CONFIG3_ADDR	0x8000000C
+#define KORINA_CONFIG4_ADDR	0x80000010
+#define KORINA_CONFIG5_ADDR	0x80000014
+#define KORINA_CONFIG6_ADDR	0x80000018
+#define KORINA_CONFIG7_ADDR	0x8000001C
+#define KORINA_CONFIG8_ADDR	0x80000020
+#define KORINA_CONFIG9_ADDR	0x80000024
+#define KORINA_CONFIG10_ADDR	0x80000028
+#define KORINA_CONFIG11_ADDR	0x8000002C
+#define KORINA_CONFIG12_ADDR	0x80000030
+#define KORINA_CONFIG13_ADDR	0x80000034
+#define KORINA_CONFIG14_ADDR	0x80000038
+#define KORINA_CONFIG15_ADDR	0x8000003C
+#define KORINA_CONFIG16_ADDR	0x80000040
+#define KORINA_CONFIG17_ADDR	0x80000044
+#define KORINA_CONFIG18_ADDR	0x80000048
+#define KORINA_CONFIG19_ADDR	0x8000004C
+#define KORINA_CONFIG20_ADDR	0x80000050
+#define KORINA_CONFIG21_ADDR	0x80000054
+#define KORINA_CONFIG22_ADDR	0x80000058
+#define KORINA_CONFIG23_ADDR	0x8000005C
+#define KORINA_CONFIG24_ADDR	0x80000060
+#define KORINA_CONFIG25_ADDR	0x80000064
+#define KORINA_CMD 		(PCI_CFG04_CMD_IO_ENA | \
+				 PCI_CFG04_CMD_MEM_ENA | \
+				 PCI_CFG04_CMD_BM_ENA | \
+				 PCI_CFG04_CMD_MW_INV | \
+				 PCI_CFG04_CMD_PAR_ENA | \
+				 PCI_CFG04_CMD_SER_ENA)
+
+#define KORINA_STAT		(PCI_CFG04_STAT_MDPE | \
+				 PCI_CFG04_STAT_STA | \
+				 PCI_CFG04_STAT_RTA | \
+				 PCI_CFG04_STAT_RMA | \
+				 PCI_CFG04_STAT_SSE | \
+				 PCI_CFG04_STAT_PE)
+
+#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
+
+#define KORINA_REVID		0
+#define KORINA_CLASS_CODE	0
+#define KORINA_CNFG2		((KORINA_CLASS_CODE<<8) | \
+				  KORINA_REVID)
+
+#define KORINA_CACHE_LINE_SIZE	4
+#define KORINA_MASTER_LAT	0x3c
+#define KORINA_HEADER_TYPE	0
+#define KORINA_BIST		0
+
+#define KORINA_CNFG3 ((KORINA_BIST << 24) | \
+		      (KORINA_HEADER_TYPE<<16) | \
+		      (KORINA_MASTER_LAT<<8) | \
+		      KORINA_CACHE_LINE_SIZE)
+
+#define KORINA_BAR0	0x00000008	/* 128 MB Memory */
+#define KORINA_BAR1	0x18800001	/* 1 MB IO */
+#define KORINA_BAR2	0x18000001	/* 2 MB IO window for Korina
+					   internal Registers */
+#define KORINA_BAR3	0x48000008	/* Spare 128 MB Memory */
+
+#define KORINA_CNFG4	KORINA_BAR0
+#define KORINA_CNFG5    KORINA_BAR1
+#define KORINA_CNFG6 	KORINA_BAR2
+#define KORINA_CNFG7	KORINA_BAR3
+
+#define KORINA_SUBSYS_VENDOR_ID 0x011d
+#define KORINA_SUBSYSTEM_ID	0x0214
+#define KORINA_CNFG8		0
+#define KORINA_CNFG9		0
+#define KORINA_CNFG10		0
+#define KORINA_CNFG11 	((KORINA_SUBSYS_VENDOR_ID<<16) | \
+			  KORINA_SUBSYSTEM_ID)
+#define KORINA_INT_LINE		1
+#define KORINA_INT_PIN		1
+#define KORINA_MIN_GNT		8
+#define KORINA_MAX_LAT		0x38
+#define KORINA_CNFG12		0
+#define KORINA_CNFG13 		0
+#define KORINA_CNFG14		0
+#define KORINA_CNFG15	((KORINA_MAX_LAT<<24) | \
+			 (KORINA_MIN_GNT<<16) | \
+			 (KORINA_INT_PIN<<8)  | \
+			  KORINA_INT_LINE)
+#define	KORINA_RETRY_LIMIT	0x80
+#define KORINA_TRDY_LIMIT	0x80
+#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \
+			KORINA_TRDY_LIMIT)
+#define PCI_PBAxC_R		0x0
+#define PCI_PBAxC_RL		0x1
+#define PCI_PBAxC_RM		0x2
+#define SIZE_SHFT		2
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA0C	(PCI_PBAC_MRL | PCI_PBAC_SB | \
+			  ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+			  PCI_PBAC_PP | \
+			  (SIZE_128MB<<SIZE_SHFT) | \
+			   PCI_PBAC_P)
+#else
+#define KORINA_PBA0C	(PCI_PBAC_MRL | \
+			  ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+			  PCI_PBAC_PP | \
+			  (SIZE_128MB<<SIZE_SHFT) | \
+			   PCI_PBAC_P)
+#endif
+#define KORINA_CNFG17	KORINA_PBA0C
+#define KORINA_PBA0M	0x0
+#define KORINA_CNFG18	KORINA_PBA0M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+			  PCI_PBAC_MSI)
+#else
+#define KORINA_PBA1C	((SIZE_1MB<<SIZE_SHFT) | \
+			  PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG19	KORINA_PBA1C
+#define KORINA_PBA1M	0x0
+#define KORINA_CNFG20	KORINA_PBA1M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+			  PCI_PBAC_MSI)
+#else
+#define KORINA_PBA2C	((SIZE_2MB<<SIZE_SHFT) | \
+			  PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG21	KORINA_PBA2C
+#define KORINA_PBA2M	0x18000000
+#define KORINA_CNFG22	KORINA_PBA2M
+#define KORINA_PBA3C	0
+#define KORINA_CNFG23	KORINA_PBA3C
+#define KORINA_PBA3M	0
+#define KORINA_CNFG24	KORINA_PBA3M
+
+#define	PCITC_DTIMER_VAL	8
+#define PCITC_RTIMER_VAL	0x10
+
+#endif  /* __ASM_RC32434_PCI_H */
diff --git a/include/asm-mips/mach-rc32434/prom.h b/include/asm-mips/mach-rc32434/prom.h
new file mode 100644
index 000000000000..1d66ddcda89a
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/prom.h
@@ -0,0 +1,44 @@
+/*
+ *  Definitions for the PROM
+ *
+ *  Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define PROM_ENTRY(x)		(0xbfc00000 + ((x) * 8))
+
+#define GPIO_INIT_NOBUTTON	""
+#define GPIO_INIT_BUTTON	" 2"
+
+#define SR_NMI			0x00180000
+#define SERIAL_SPEED_ENTRY	0x00000001
+
+#define FREQ_TAG		"HZ="
+#define GPIO_TAG		"gpio="
+#define KMAC_TAG		"kmac="
+#define MEM_TAG			"mem="
+#define BOARD_TAG		"board="
+
+#define BOARD_RB532		"500"
+#define BOARD_RB532A		"500r5"
diff --git a/include/asm-mips/mach-rc32434/rb.h b/include/asm-mips/mach-rc32434/rb.h
new file mode 100644
index 000000000000..e0a76e3ffea8
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/rb.h
@@ -0,0 +1,81 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  Copyright (C) 2004 IDT Inc.
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_RC32434_RB_H
+#define __ASM_RC32434_RB_H
+
+#include <linux/genhd.h>
+
+#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(0x18000000))
+#define DEV0BASE	0x010000
+#define DEV0MASK	0x010004
+#define DEV0C		0x010008
+#define DEV0T		0x01000C
+#define DEV1BASE	0x010010
+#define DEV1MASK	0x010014
+#define DEV1C		0x010018
+#define DEV1TC		0x01001C
+#define DEV2BASE	0x010020
+#define DEV2MASK	0x010024
+#define DEV2C		0x010028
+#define DEV2TC		0x01002C
+#define DEV3BASE	0x010030
+#define DEV3MASK	0x010034
+#define DEV3C		0x010038
+#define DEV3TC		0x01003C
+#define BTCS		0x010040
+#define BTCOMPARE	0x010044
+#define GPIOBASE	0x050000
+#define GPIOCFG		0x050004
+#define GPIOD		0x050008
+#define GPIOILEVEL	0x05000C
+#define GPIOISTAT	0x050010
+#define GPIONMIEN	0x050014
+#define IMASK6		0x038038
+#define LO_WPX		(1 << 0)
+#define LO_ALE		(1 << 1)
+#define LO_CLE		(1 << 2)
+#define LO_CEX		(1 << 3)
+#define LO_FOFF		(1 << 5)
+#define LO_SPICS	(1 << 6)
+#define LO_ULED		(1 << 7)
+
+#define BIT_TO_MASK(x)	(1 << x)
+
+struct dev_reg {
+	u32	base;
+	u32	mask;
+	u32	ctl;
+	u32	timing;
+};
+
+struct korina_device {
+	char *name;
+	unsigned char mac[6];
+	struct net_device *dev;
+};
+
+struct cf_device {
+	int gpio_pin;
+	void *dev;
+	struct gendisk *gd;
+};
+
+struct mpmc_device {
+	unsigned char	state;
+	spinlock_t	lock;
+	void __iomem 	*base;
+};
+
+#endif  /* __ASM_RC32434_RB_H */
diff --git a/include/asm-mips/mach-rc32434/rc32434.h b/include/asm-mips/mach-rc32434/rc32434.h
new file mode 100644
index 000000000000..c4a02145104e
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/rc32434.h
@@ -0,0 +1,61 @@
+/*
+ * Definitions for IDT RC323434 CPU.
+ */
+
+#ifndef _ASM_RC32434_RC32434_H_
+#define _ASM_RC32434_RC32434_H_
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#define RC32434_REG_BASE	0x18000000
+#define RC32434_RST		(1 << 15)
+
+#define IDT_CLOCK_MULT		2
+#define MIPS_CPU_TIMER_IRQ	7
+
+/* Interrupt Controller */
+#define IC_GROUP0_PEND		(RC32434_REG_BASE + 0x38000)
+#define IC_GROUP0_MASK		(RC32434_REG_BASE + 0x38008)
+#define IC_GROUP_OFFSET		0x0C
+
+#define NUM_INTR_GROUPS		5
+
+/* 16550 UARTs */
+#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
+					/* GRP3 IRQ numbers start here */
+#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
+					/* GRP4 IRQ numbers start here */
+#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
+					/* GRP5 IRQ numbers start here */
+#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
+#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)
+
+
+#ifdef __MIPSEB__
+#define RC32434_UART0_BASE	(RC32434_REG_BASE + 0x58003)
+#else
+#define RC32434_UART0_BASE	(RC32434_REG_BASE + 0x58000)
+#endif
+
+#define RC32434_UART0_IRQ	(GROUP3_IRQ_BASE + 0)
+
+/* cpu pipeline flush */
+static inline void rc32434_sync(void)
+{
+	__asm__ volatile ("sync");
+}
+
+static inline void rc32434_sync_udelay(int us)
+{
+	__asm__ volatile ("sync");
+	udelay(us);
+}
+
+static inline void rc32434_sync_delay(int ms)
+{
+	__asm__ volatile ("sync");
+	mdelay(ms);
+}
+
+#endif  /* _ASM_RC32434_RC32434_H_ */
diff --git a/include/asm-mips/mach-rc32434/timer.h b/include/asm-mips/mach-rc32434/timer.h
new file mode 100644
index 000000000000..e49b1d57a017
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/timer.h
@@ -0,0 +1,65 @@
+/*
+ *  Definitions for timer registers
+ *
+ *  Copyright 2004 Philip Rischel <rischelp@idt.com>
+ *  Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_RC32434_TIMER_H
+#define __ASM_RC32434_TIMER_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define TIMER0_BASE_ADDR		0x18028000
+#define TIMER_COUNT			3
+
+struct timer_counter {
+	u32 count;
+	u32 compare;
+	u32 ctc;		/*use CTC_ */
+};
+
+struct timer {
+	struct timer_counter tim[TIMER_COUNT];
+	u32 rcount;	/* use RCOUNT_ */
+	u32 rcompare;	/* use RCOMPARE_ */
+	u32 rtc;	/* use RTC_ */
+};
+
+#define RC32434_CTC_EN_BIT		0
+#define RC32434_CTC_TO_BIT		1
+
+/* Real time clock registers */
+#define RC32434_RTC_MSK(x)              BIT_TO_MASK(x)
+#define RC32434_RTC_CE_BIT              0
+#define RC32434_RTC_TO_BIT              1
+#define RC32434_RTC_RQE_BIT             2
+
+/* Counter registers */
+#define RC32434_RCOUNT_BIT              0
+#define RC32434_RCOUNT_MSK              0x0000ffff
+#define RC32434_RCOMP_BIT               0
+#define RC32434_RCOMP_MSK               0x0000ffff
+
+#endif  /* __ASM_RC32434_TIMER_H */
diff --git a/include/asm-mips/mach-rc32434/war.h b/include/asm-mips/mach-rc32434/war.h
new file mode 100644
index 000000000000..3ddf187e98a6
--- /dev/null
+++ b/include/asm-mips/mach-rc32434/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	1
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/include/asm-mips/mips-boards/atlas.h b/include/asm-mips/mips-boards/atlas.h
deleted file mode 100644
index a8ae12d120ee..000000000000
--- a/include/asm-mips/mips-boards/atlas.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines of the Atlas board specific address-MAP, registers, etc.
- *
- */
-#ifndef _MIPS_ATLAS_H
-#define _MIPS_ATLAS_H
-
-#include <asm/addrspace.h>
-
-/*
- * Atlas RTC-device indirect register access.
- */
-#define ATLAS_RTC_ADR_REG       0x1f000800
-#define ATLAS_RTC_DAT_REG       0x1f000808
-
-/*
- * Atlas interrupt controller register base.
- */
-#define ATLAS_ICTRL_REGS_BASE   0x1f000000
-
-/*
- * Atlas registers are memory mapped on 64-bit aligned boundaries and
- * only word access are allowed.
- */
-struct atlas_ictrl_regs {
-	volatile unsigned int intraw;
-	int dummy1;
-	volatile unsigned int intseten;
-	int dummy2;
-	volatile unsigned int intrsten;
-	int dummy3;
-	volatile unsigned int intenable;
-	int dummy4;
-	volatile unsigned int intstatus;
-	int dummy5;
-};
-
-/*
- * Atlas UART register base.
- */
-#define ATLAS_UART_REGS_BASE    0x1f000900
-#define ATLAS_BASE_BAUD ( 3686400 / 16 )
-
-/*
- * Atlas PSU standby register.
- */
-#define ATLAS_PSUSTBY_REG       0x1f000600
-#define ATLAS_GOSTBY            0x4d
-
-/*
- * We make a universal assumption about the way the bootloader (YAMON)
- * have located the Philips SAA9730 chip.
- * This is not ideal, but is needed for setting up remote debugging as
- * soon as possible.
- */
-#define ATLAS_SAA9730_REG	0x10800000
-
-#define ATLAS_SAA9730_BAUDCLOCK	3692300
-
-#endif /* !(_MIPS_ATLAS_H) */
diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
deleted file mode 100644
index 93ba1c1b2a4f..000000000000
--- a/include/asm-mips/mips-boards/atlasint.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 1999, 2006  MIPS Technologies, Inc.  All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines for the Atlas interrupt controller.
- *
- */
-#ifndef _MIPS_ATLASINT_H
-#define _MIPS_ATLASINT_H
-
-#include <irq.h>
-
-/* CPU interrupt offsets */
-#define MIPSCPU_INT_SW0		0
-#define MIPSCPU_INT_SW1		1
-#define MIPSCPU_INT_MB0		2
-#define MIPSCPU_INT_ATLAS	MIPSCPU_INT_MB0
-#define MIPSCPU_INT_MB1		3
-#define MIPSCPU_INT_MB2		4
-#define MIPSCPU_INT_MB3		5
-#define MIPSCPU_INT_MB4		6
-
-/*
- * Interrupts 8..39 are used for Atlas interrupt controller interrupts
- */
-#define ATLAS_INT_BASE		8
-#define ATLAS_INT_UART		(ATLAS_INT_BASE + 0)
-#define ATLAS_INT_TIM0		(ATLAS_INT_BASE + 1)
-#define ATLAS_INT_RES2		(ATLAS_INT_BASE + 2)
-#define ATLAS_INT_RES3		(ATLAS_INT_BASE + 3)
-#define ATLAS_INT_RTC		(ATLAS_INT_BASE + 4)
-#define ATLAS_INT_COREHI	(ATLAS_INT_BASE + 5)
-#define ATLAS_INT_CORELO	(ATLAS_INT_BASE + 6)
-#define ATLAS_INT_RES7		(ATLAS_INT_BASE + 7)
-#define ATLAS_INT_PCIA		(ATLAS_INT_BASE + 8)
-#define ATLAS_INT_PCIB		(ATLAS_INT_BASE + 9)
-#define ATLAS_INT_PCIC		(ATLAS_INT_BASE + 10)
-#define ATLAS_INT_PCID		(ATLAS_INT_BASE + 11)
-#define ATLAS_INT_ENUM		(ATLAS_INT_BASE + 12)
-#define ATLAS_INT_DEG		(ATLAS_INT_BASE + 13)
-#define ATLAS_INT_ATXFAIL	(ATLAS_INT_BASE + 14)
-#define ATLAS_INT_INTA		(ATLAS_INT_BASE + 15)
-#define ATLAS_INT_INTB		(ATLAS_INT_BASE + 16)
-#define ATLAS_INT_ETH		ATLAS_INT_INTB
-#define ATLAS_INT_INTC		(ATLAS_INT_BASE + 17)
-#define ATLAS_INT_SCSI		ATLAS_INT_INTC
-#define ATLAS_INT_INTD		(ATLAS_INT_BASE + 18)
-#define ATLAS_INT_SERR		(ATLAS_INT_BASE + 19)
-#define ATLAS_INT_RES20		(ATLAS_INT_BASE + 20)
-#define ATLAS_INT_RES21		(ATLAS_INT_BASE + 21)
-#define ATLAS_INT_RES22		(ATLAS_INT_BASE + 22)
-#define ATLAS_INT_RES23		(ATLAS_INT_BASE + 23)
-#define ATLAS_INT_RES24		(ATLAS_INT_BASE + 24)
-#define ATLAS_INT_RES25		(ATLAS_INT_BASE + 25)
-#define ATLAS_INT_RES26		(ATLAS_INT_BASE + 26)
-#define ATLAS_INT_RES27		(ATLAS_INT_BASE + 27)
-#define ATLAS_INT_RES28		(ATLAS_INT_BASE + 28)
-#define ATLAS_INT_RES29		(ATLAS_INT_BASE + 29)
-#define ATLAS_INT_RES30		(ATLAS_INT_BASE + 30)
-#define ATLAS_INT_RES31		(ATLAS_INT_BASE + 31)
-#define ATLAS_INT_END		(ATLAS_INT_BASE + 31)
-
-/*
- * Interrupts 64..127 are used for Soc-it Classic interrupts
- */
-#define MSC01C_INT_BASE		64
-
-/* SOC-it Classic interrupt offsets */
-#define MSC01C_INT_TMR		0
-#define MSC01C_INT_PCI		1
-
-/*
- * Interrupts 64..127 are used for Soc-it EIC interrupts
- */
-#define MSC01E_INT_BASE		64
-
-/* SOC-it EIC interrupt offsets */
-#define	MSC01E_INT_SW0		1
-#define	MSC01E_INT_SW1		2
-#define	MSC01E_INT_MB0		3
-#define	MSC01E_INT_ATLAS	MSC01E_INT_MB0
-#define	MSC01E_INT_MB1		4
-#define	MSC01E_INT_MB2		5
-#define	MSC01E_INT_MB3		6
-#define	MSC01E_INT_MB4		7
-#define	MSC01E_INT_TMR		8
-#define	MSC01E_INT_PCI		9
-#define	MSC01E_INT_PERFCTR	10
-#define	MSC01E_INT_CPUCTR	11
-
-#endif /* !(_MIPS_ATLASINT_H) */
diff --git a/include/asm-mips/mips-boards/maltasmp.h b/include/asm-mips/mips-boards/maltasmp.h
deleted file mode 100644
index 8d7e955d506e..000000000000
--- a/include/asm-mips/mips-boards/maltasmp.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * There are several SMP models supported
- * SMTC is mutually exclusive to other options (atm)
- */
-#if defined(CONFIG_MIPS_MT_SMTC)
-#define malta_smtc	1
-#define malta_cmp	0
-#define malta_smvp	0
-#else
-#define malta_smtc	0
-#if defined(CONFIG_MIPS_CMP)
-extern int gcmp_present;
-#define malta_cmp	gcmp_present
-#else
-#define malta_cmp	0
-#endif
-/* FIXME: should become COMFIG_MIPS_MT_SMVP */
-#if defined(CONFIG_MIPS_MT_SMP)
-#define malta_smvp	1
-#else
-#define malta_smvp	0
-#endif
-#endif
-
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-
-/* malta_smtc */
-#include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
-
-/* malta_cmp */
-#include <asm/cmp.h>
-
-/* malta_smvp */
-#include <asm/smvp.h>
diff --git a/include/asm-mips/mips-boards/saa9730_uart.h b/include/asm-mips/mips-boards/saa9730_uart.h
deleted file mode 100644
index c913143d58ec..000000000000
--- a/include/asm-mips/mips-boards/saa9730_uart.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Register definitions for the UART part of the Philips SAA9730 chip.
- *
- */
-
-#ifndef SAA9730_UART_H
-#define SAA9730_UART_H
-
-/* The SAA9730 UART register map, as seen via the PCI bus */
-
-#define SAA9730_UART_REGS_ADDR	0x21800
-
-struct uart_saa9730_regmap {
-	volatile unsigned char Thr_Rbr;
-	volatile unsigned char Ier;
-	volatile unsigned char Iir_Fcr;
-	volatile unsigned char Lcr;
-	volatile unsigned char Mcr;
-	volatile unsigned char Lsr;
-	volatile unsigned char Msr;
-	volatile unsigned char Scr;
-	volatile unsigned char BaudDivLsb;
-	volatile unsigned char BaudDivMsb;
-	volatile unsigned char Junk0;
-	volatile unsigned char Junk1;
-	volatile unsigned int Config;		/* 0x2180c */
-	volatile unsigned int TxStart;		/* 0x21810 */
-	volatile unsigned int TxLength;		/* 0x21814 */
-	volatile unsigned int TxCounter;	/* 0x21818 */
-	volatile unsigned int RxStart;		/* 0x2181c */
-	volatile unsigned int RxLength;		/* 0x21820 */
-	volatile unsigned int RxCounter;	/* 0x21824 */
-};
-typedef volatile struct uart_saa9730_regmap t_uart_saa9730_regmap;
-
-/*
- * Only a subset of the UART control bits are defined here,
- * enough to make the serial debug port work.
- */
-
-#define SAA9730_LCR_DATA8	0x03
-
-#define SAA9730_MCR_DTR		0x01
-#define SAA9730_MCR_RTS		0x02
-
-#define SAA9730_LSR_DR		0x01
-#define SAA9730_LSR_THRE	0x20
-
-#endif /* !(SAA9730_UART_H) */
diff --git a/include/asm-mips/mips-boards/sead.h b/include/asm-mips/mips-boards/sead.h
deleted file mode 100644
index 68c69de0b66f..000000000000
--- a/include/asm-mips/mips-boards/sead.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines of the SEAD board specific address-MAP, registers, etc.
- *
- */
-#ifndef _MIPS_SEAD_H
-#define _MIPS_SEAD_H
-
-#include <asm/addrspace.h>
-
-/*
- * SEAD UART register base.
- */
-#define SEAD_UART0_REGS_BASE    (0x1f000800)
-#define SEAD_BASE_BAUD ( 3686400 / 16 )
-
-#endif /* !(_MIPS_SEAD_H) */
diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h
deleted file mode 100644
index e710bae07340..000000000000
--- a/include/asm-mips/mips-boards/seadint.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Defines for the SEAD interrupt controller.
- */
-#ifndef _MIPS_SEADINT_H
-#define _MIPS_SEADINT_H
-
-#include <irq.h>
-
-#define MIPSCPU_INT_UART0	2
-#define MIPSCPU_INT_UART1	3
-
-#endif /* !(_MIPS_SEADINT_H) */
diff --git a/include/asm-mips/namei.h b/include/asm-mips/namei.h
deleted file mode 100644
index a6605a752469..000000000000
--- a/include/asm-mips/namei.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_NAMEI_H
-#define _ASM_NAMEI_H
-
-/*
- * This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 8735aa0b8963..fe7a88ea066e 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -34,6 +34,9 @@
 #include <linux/pfn.h>
 #include <asm/io.h>
 
+extern void build_clear_page(void);
+extern void build_copy_page(void);
+
 /*
  * It's normally defined only for FLATMEM config but it's
  * used in our early mem init code for all memory models.
@@ -134,9 +137,6 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 /*
  * __pa()/__va() should be used only during mem init.
  */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index d3be83436070..5510c53b7feb 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -173,6 +173,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 
 extern int pci_probe_only;
-extern unsigned int pcibios_max_latency;
+
+extern char * (*pcibios_plat_setup)(char *str);
 
 #endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 58cbac5a64e4..a1e4453469f9 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -45,7 +45,7 @@ extern unsigned int vced_count, vcei_count;
  * This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+#define TASK_UNMAPPED_BASE	((TASK_SIZE / 3) & ~(PAGE_SIZE))
 #endif
 
 #ifdef CONFIG_64BIT
diff --git a/include/asm-mips/semaphore.h b/include/asm-mips/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-mips/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-mips/setup.h b/include/asm-mips/setup.h
index 883f59bfa097..e600cedda976 100644
--- a/include/asm-mips/setup.h
+++ b/include/asm-mips/setup.h
@@ -3,6 +3,8 @@
 
 #define COMMAND_LINE_SIZE	256
 
+#ifdef  __KERNEL__
 extern void setup_early_printk(void);
+#endif /* __KERNEL__ */
 
 #endif /* __SETUP_H */
diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h
index 63f60254d308..facc2d7a87ca 100644
--- a/include/asm-mips/socket.h
+++ b/include/asm-mips/socket.h
@@ -102,6 +102,13 @@ enum sock_type {
 };
 
 #define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1.  The
+ *  * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, paccept */
+#define SOCK_CLOEXEC	O_CLOEXEC
+#define SOCK_NONBLOCK	O_NONBLOCK
 
 #define ARCH_HAS_SOCKET_TYPES 1
 
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
index b2772df1a1bd..bb3060699df2 100644
--- a/include/asm-mips/thread_info.h
+++ b/include/asm-mips/thread_info.h
@@ -82,6 +82,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_MASK (THREAD_SIZE - 1UL)
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk)					\
 ({								\
diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h
index d8756660523d..5b1ccf901c62 100644
--- a/include/asm-mips/txx9/generic.h
+++ b/include/asm-mips/txx9/generic.h
@@ -12,6 +12,8 @@
 #include <linux/ioport.h>	/* for struct resource */
 
 extern struct resource txx9_ce_res[];
+#define TXX9_CE(n)	(unsigned long)(txx9_ce_res[(n)].start)
+extern unsigned int txx9_pcode;
 extern char txx9_pcode_str[8];
 void txx9_reg_res_init(unsigned int pcode, unsigned long base,
 		       unsigned long size);
@@ -19,6 +21,11 @@ void txx9_reg_res_init(unsigned int pcode, unsigned long base,
 extern unsigned int txx9_master_clock;
 extern unsigned int txx9_cpu_clock;
 extern unsigned int txx9_gbus_clock;
+#define TXX9_IMCLK	(txx9_gbus_clock / 2)
+
+extern int txx9_ccfg_toeon;
+struct uart_port;
+int early_serial_txx9_setup(struct uart_port *port);
 
 struct pci_dev;
 struct txx9_board_vec {
@@ -37,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec;
 extern int (*txx9_irq_dispatch)(int pending);
 void prom_init_cmdline(void);
 char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+		   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
 
 #endif /* __ASM_TXX9_GENERIC_H */
diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h
index d6eb1b6a54eb..a409c446bf18 100644
--- a/include/asm-mips/txx9/jmr3927.h
+++ b/include/asm-mips/txx9/jmr3927.h
@@ -149,8 +149,6 @@
 
 /* Clocks */
 #define JMR3927_CORECLK	132710400	/* 132.7MHz */
-#define JMR3927_GBUSCLK	(JMR3927_CORECLK / 2)	/* 66.35MHz */
-#define JMR3927_IMCLK	(JMR3927_CORECLK / 4)	/* 33.17MHz */
 
 /*
  * TX3927 Pin Configuration:
diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h
index d89a45091e24..3d32529060aa 100644
--- a/include/asm-mips/txx9/pci.h
+++ b/include/asm-mips/txx9/pci.h
@@ -33,4 +33,7 @@ enum txx9_pci_err_action {
 };
 extern enum txx9_pci_err_action txx9_pci_err_action;
 
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
 #endif /* __ASM_TXX9_PCI_H */
diff --git a/include/asm-mips/txx9/rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h
index bf194589216f..6fcec912c143 100644
--- a/include/asm-mips/txx9/rbtx4927.h
+++ b/include/asm-mips/txx9/rbtx4927.h
@@ -34,7 +34,23 @@
 #define RBTX4927_PCIIO		0x16000000
 #define RBTX4927_PCIIO_SIZE	0x01000000
 
-#define rbtx4927_pcireset_addr	((__u8 __iomem *)0xbc00f006UL)
+#define RBTX4927_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4927_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4927_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f000)
+#define RBTX4927_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f002)
+#define RBTX4927_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000f006)
+#define RBTX4927_BRAMRTC_BASE	(IO_BASE + TXX9_CE(2) + 0x00010000)
+#define RBTX4927_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
+
+/* Ethernet port address */
+#define RBTX4927_ETHER_ADDR	(RBTX4927_ETHER_BASE + 0x280)
+
+#define rbtx4927_imask_addr	((__u8 __iomem *)RBTX4927_IMASK_ADDR)
+#define rbtx4927_imstat_addr	((__u8 __iomem *)RBTX4927_IMSTAT_ADDR)
+#define rbtx4927_softreset_addr	((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR)
+#define rbtx4927_softresetlock_addr	\
+				((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR)
+#define rbtx4927_pcireset_addr	((__u8 __iomem *)RBTX4927_PCIRESET_ADDR)
 
 /* bits for ISTAT/IMASK/IMSTAT */
 #define RBTX4927_INTB_PCID	0
@@ -62,13 +78,7 @@
 #define RBTX4927_ISA_IO_OFFSET 0
 #endif
 
-#define RBTX4927_SW_RESET_DO         (void __iomem *)0xbc00f000UL
-#define RBTX4927_SW_RESET_DO_SET                0x01
-
-#define RBTX4927_SW_RESET_ENABLE     (void __iomem *)0xbc00f002UL
-#define RBTX4927_SW_RESET_ENABLE_SET            0x01
-
-#define RBTX4927_RTL_8019_BASE (0x1c020280 - RBTX4927_ISA_IO_OFFSET)
+#define RBTX4927_RTL_8019_BASE (RBTX4927_ETHER_ADDR - mips_io_port_base)
 #define RBTX4927_RTL_8019_IRQ  (TXX9_IRQ_BASE + TX4927_IR_INT(3))
 
 void rbtx4927_prom_init(void);
diff --git a/include/asm-mips/txx9/rbtx4938.h b/include/asm-mips/txx9/rbtx4938.h
index 2f5d5e705a41..9f0441a28126 100644
--- a/include/asm-mips/txx9/rbtx4938.h
+++ b/include/asm-mips/txx9/rbtx4938.h
@@ -15,35 +15,31 @@
 #include <asm/txx9irq.h>
 #include <asm/txx9/tx4938.h>
 
-/* CS */
-#define RBTX4938_CE0	0x1c000000	/* 64M */
-#define RBTX4938_CE2	0x17f00000	/* 1M */
-
 /* Address map */
-#define RBTX4938_FPGA_REG_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00000000)
-#define RBTX4938_FPGA_REV_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00000002)
-#define RBTX4938_CONFIG1_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00000004)
-#define RBTX4938_CONFIG2_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00000006)
-#define RBTX4938_CONFIG3_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00000008)
-#define RBTX4938_LED_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00001000)
-#define RBTX4938_DIPSW_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00001002)
-#define RBTX4938_BDIPSW_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00001004)
-#define RBTX4938_IMASK_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00002000)
-#define RBTX4938_IMASK2_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00002002)
-#define RBTX4938_INTPOL_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00002004)
-#define RBTX4938_ISTAT_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00002006)
-#define RBTX4938_ISTAT2_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00002008)
-#define RBTX4938_IMSTAT_ADDR	(KSEG1 + RBTX4938_CE2 + 0x0000200a)
-#define RBTX4938_IMSTAT2_ADDR	(KSEG1 + RBTX4938_CE2 + 0x0000200c)
-#define RBTX4938_SOFTINT_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00003000)
-#define RBTX4938_PIOSEL_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00005000)
-#define RBTX4938_SPICS_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00005002)
-#define RBTX4938_SFPWR_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00005008)
-#define RBTX4938_SFVOL_ADDR	(KSEG1 + RBTX4938_CE2 + 0x0000500a)
-#define RBTX4938_SOFTRESET_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00007000)
-#define RBTX4938_SOFTRESETLOCK_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00007002)
-#define RBTX4938_PCIRESET_ADDR	(KSEG1 + RBTX4938_CE2 + 0x00007004)
-#define RBTX4938_ETHER_BASE	(KSEG1 + RBTX4938_CE2 + 0x00020000)
+#define RBTX4938_FPGA_REG_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000000)
+#define RBTX4938_FPGA_REV_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000002)
+#define RBTX4938_CONFIG1_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000004)
+#define RBTX4938_CONFIG2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000006)
+#define RBTX4938_CONFIG3_ADDR	(IO_BASE + TXX9_CE(2) + 0x00000008)
+#define RBTX4938_LED_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001000)
+#define RBTX4938_DIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001002)
+#define RBTX4938_BDIPSW_ADDR	(IO_BASE + TXX9_CE(2) + 0x00001004)
+#define RBTX4938_IMASK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4938_IMASK2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002002)
+#define RBTX4938_INTPOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002004)
+#define RBTX4938_ISTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4938_ISTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x00002008)
+#define RBTX4938_IMSTAT_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200a)
+#define RBTX4938_IMSTAT2_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000200c)
+#define RBTX4938_SOFTINT_ADDR	(IO_BASE + TXX9_CE(2) + 0x00003000)
+#define RBTX4938_PIOSEL_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005000)
+#define RBTX4938_SPICS_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005002)
+#define RBTX4938_SFPWR_ADDR	(IO_BASE + TXX9_CE(2) + 0x00005008)
+#define RBTX4938_SFVOL_ADDR	(IO_BASE + TXX9_CE(2) + 0x0000500a)
+#define RBTX4938_SOFTRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007000)
+#define RBTX4938_SOFTRESETLOCK_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007002)
+#define RBTX4938_PCIRESET_ADDR	(IO_BASE + TXX9_CE(2) + 0x00007004)
+#define RBTX4938_ETHER_BASE	(IO_BASE + TXX9_CE(2) + 0x00020000)
 
 /* Ethernet port address (Jumperless Mode (W12:Open)) */
 #define RBTX4938_ETHER_ADDR	(RBTX4938_ETHER_BASE + 0x280)
diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h
index 9375e4fc2289..02e161d0755d 100644
--- a/include/asm-mips/txx9/smsc_fdc37m81x.h
+++ b/include/asm-mips/txx9/smsc_fdc37m81x.h
@@ -56,7 +56,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
 
 void smsc_fdc37m81x_config_beg(void);
 
diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h
index ca414c7624e1..587deb9592d2 100644
--- a/include/asm-mips/txx9/tx3927.h
+++ b/include/asm-mips/txx9/tx3927.h
@@ -8,19 +8,19 @@
 #ifndef __ASM_TXX9_TX3927_H
 #define __ASM_TXX9_TX3927_H
 
-#include <asm/txx9/txx927.h>
-
-#define TX3927_SDRAMC_REG	0xfffe8000
-#define TX3927_ROMC_REG		0xfffe9000
-#define TX3927_DMA_REG		0xfffeb000
-#define TX3927_IRC_REG		0xfffec000
-#define TX3927_PCIC_REG		0xfffed000
-#define TX3927_CCFG_REG		0xfffee000
+#define TX3927_REG_BASE	0xfffe0000UL
+#define TX3927_REG_SIZE	0x00010000
+#define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
+#define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
+#define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
+#define TX3927_IRC_REG		(TX3927_REG_BASE + 0xc000)
+#define TX3927_PCIC_REG		(TX3927_REG_BASE + 0xd000)
+#define TX3927_CCFG_REG		(TX3927_REG_BASE + 0xe000)
 #define TX3927_NR_TMR	3
-#define TX3927_TMR_REG(ch)	(0xfffef000 + (ch) * 0x100)
+#define TX3927_TMR_REG(ch)	(TX3927_REG_BASE + 0xf000 + (ch) * 0x100)
 #define TX3927_NR_SIO	2
-#define TX3927_SIO_REG(ch)	(0xfffef300 + (ch) * 0x100)
-#define TX3927_PIO_REG		0xfffef500
+#define TX3927_SIO_REG(ch)	(TX3927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX3927_PIO_REG		(TX3927_REG_BASE + 0xf500)
 
 struct tx3927_sdramc_reg {
 	volatile unsigned long cr[8];
@@ -235,11 +235,17 @@ struct tx3927_ccfg_reg {
 /* see PCI_STATUS_XXX in linux/pci.h */
 #define PCI_STATUS_NEW_CAP	0x0010
 
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL	0x00001600
+
 /* bits for TC */
 #define TX3927_PCIC_TC_OF16E	0x00000020
 #define TX3927_PCIC_TC_IF8E	0x00000010
 #define TX3927_PCIC_TC_OF8E	0x00000008
 
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL	0x0003ffff
+
 /* bits for IOBA/MBA */
 /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
 
@@ -312,12 +318,22 @@ struct tx3927_ccfg_reg {
 #define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
 #define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
 #define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch)	((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
 #define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
 #define tx3927_pioptr		((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
 
+#define TX3927_REV_PCODE()	(tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)	(tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)	\
+	(0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
 struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
-			      unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+		       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX3927_H */
diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h
index 46d60afc038b..195f6515db9a 100644
--- a/include/asm-mips/txx9/tx4927.h
+++ b/include/asm-mips/txx9/tx4927.h
@@ -32,32 +32,46 @@
 #include <asm/txx9irq.h>
 #include <asm/txx9/tx4927pcic.h>
 
-#define TX4927_SDRAMC_REG	0xff1f8000
-#define TX4927_EBUSC_REG	0xff1f9000
-#define TX4927_PCIC_REG		0xff1fd000
-#define TX4927_CCFG_REG		0xff1fe000
-#define TX4927_IRC_REG		0xff1ff600
+#ifdef CONFIG_64BIT
+#define TX4927_REG_BASE	0xffffffffff1f0000UL
+#else
+#define TX4927_REG_BASE	0xff1f0000UL
+#endif
+#define TX4927_REG_SIZE	0x00010000
+
+#define TX4927_SDRAMC_REG	(TX4927_REG_BASE + 0x8000)
+#define TX4927_EBUSC_REG	(TX4927_REG_BASE + 0x9000)
+#define TX4927_PCIC_REG		(TX4927_REG_BASE + 0xd000)
+#define TX4927_CCFG_REG		(TX4927_REG_BASE + 0xe000)
+#define TX4927_IRC_REG		(TX4927_REG_BASE + 0xf600)
 #define TX4927_NR_TMR	3
-#define TX4927_TMR_REG(ch)	(0xff1ff000 + (ch) * 0x100)
+#define TX4927_TMR_REG(ch)	(TX4927_REG_BASE + 0xf000 + (ch) * 0x100)
+#define TX4927_NR_SIO	2
+#define TX4927_SIO_REG(ch)	(TX4927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX4927_PIO_REG		(TX4927_REG_BASE + 0xf500)
 
 #define TX4927_IR_INT(n)	(2 + (n))
 #define TX4927_IR_SIO(n)	(8 + (n))
 #define TX4927_IR_PCIC		16
+#define TX4927_NUM_IR_TMR	3
+#define TX4927_IR_TMR(n)	(17 + (n))
 #define TX4927_IR_PCIERR	22
 #define TX4927_NUM_IR	32
 
 #define TX4927_IRC_INT	2	/* IP[2] in Status register */
 
+#define TX4927_NUM_PIO	16
+
 struct tx4927_sdramc_reg {
-	volatile unsigned long long cr[4];
-	volatile unsigned long long unused0[4];
-	volatile unsigned long long tr;
-	volatile unsigned long long unused1[2];
-	volatile unsigned long long cmd;
+	u64 cr[4];
+	u64 unused0[4];
+	u64 tr;
+	u64 unused1[2];
+	u64 cmd;
 };
 
 struct tx4927_ebusc_reg {
-	volatile unsigned long long cr[8];
+	u64 cr[8];
 };
 
 struct tx4927_ccfg_reg {
@@ -160,12 +174,28 @@ struct tx4927_ccfg_reg {
 #define TX4927_CLKCTR_SIO0RST	0x00000002
 #define TX4927_CLKCTR_SIO1RST	0x00000001
 
-#define tx4927_sdramcptr	((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG)
+#define tx4927_sdramcptr \
+		((struct tx4927_sdramc_reg __iomem *)TX4927_SDRAMC_REG)
 #define tx4927_pcicptr \
 		((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG)
 #define tx4927_ccfgptr \
 		((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG)
-#define tx4927_ebuscptr		((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG)
+#define tx4927_ebuscptr \
+		((struct tx4927_ebusc_reg __iomem *)TX4927_EBUSC_REG)
+#define tx4927_pioptr		((struct txx9_pio_reg __iomem *)TX4927_PIO_REG)
+
+#define TX4927_REV_PCODE()	\
+	((__u32)__raw_readq(&tx4927_ccfgptr->crir) >> 16)
+
+#define TX4927_SDRAMC_CR(ch)	__raw_readq(&tx4927_sdramcptr->cr[(ch)])
+#define TX4927_SDRAMC_BA(ch)	((TX4927_SDRAMC_CR(ch) >> 49) << 21)
+#define TX4927_SDRAMC_SIZE(ch)	\
+	((((TX4927_SDRAMC_CR(ch) >> 33) & 0x7fff) + 1) << 21)
+
+#define TX4927_EBUSC_CR(ch)	__raw_readq(&tx4927_ebuscptr->cr[(ch)])
+#define TX4927_EBUSC_BA(ch)	((TX4927_EBUSC_CR(ch) >> 48) << 20)
+#define TX4927_EBUSC_SIZE(ch)	\
+	(0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf))
 
 /* utilities */
 static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits)
@@ -212,8 +242,14 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new)
 		       &tx4927_ccfgptr->ccfg);
 }
 
+unsigned int tx4927_get_mem_size(void);
+void tx4927_wdt_init(void);
+void tx4927_setup(void);
+void tx4927_time_init(unsigned int tmrnr);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
 int tx4927_report_pciclk(void);
 int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
 void tx4927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX4927_H */
diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h
index d61c3d09c4a2..c470b8a5fe57 100644
--- a/include/asm-mips/txx9/tx4927pcic.h
+++ b/include/asm-mips/txx9/tx4927pcic.h
@@ -10,6 +10,7 @@
 #define __ASM_TXX9_TX4927PCIC_H
 
 #include <linux/pci.h>
+#include <linux/irqreturn.h>
 
 struct tx4927_pcic_reg {
 	u32 pciid;
@@ -192,8 +193,11 @@ struct tx4927_pcic_reg {
 
 struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
 	struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
-			      struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+		       struct pci_controller *channel, int extarb);
 void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
 
 #endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h
index 12de68a4c10a..8175d4ccbc39 100644
--- a/include/asm-mips/txx9/tx4938.h
+++ b/include/asm-mips/txx9/tx4938.h
@@ -15,20 +15,11 @@
 /* some controllers are compatible with 4927 */
 #include <asm/txx9/tx4927.h>
 
-#define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr))
-#define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b)
-
-#define TX4938_PCIIO_0 0x10000000
-#define TX4938_PCIIO_1 0x01010000
-#define TX4938_PCIMEM_0 0x08000000
-#define TX4938_PCIMEM_1 0x11000000
-
-#define TX4938_PCIIO_SIZE_0 0x01000000
-#define TX4938_PCIIO_SIZE_1 0x00010000
-#define TX4938_PCIMEM_SIZE_0 0x08000000
-#define TX4938_PCIMEM_SIZE_1 0x00010000
-
-#define TX4938_REG_BASE	0xff1f0000 /* == TX4937_REG_BASE */
+#ifdef CONFIG_64BIT
+#define TX4938_REG_BASE	0xffffffffff1f0000UL /* == TX4937_REG_BASE */
+#else
+#define TX4938_REG_BASE	0xff1f0000UL /* == TX4937_REG_BASE */
+#endif
 #define TX4938_REG_SIZE	0x00010000 /* == TX4937_REG_SIZE */
 
 /* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */
@@ -49,149 +40,8 @@
 #define TX4938_ACLC_REG		(TX4938_REG_BASE + 0xf700)
 #define TX4938_SPI_REG		(TX4938_REG_BASE + 0xf800)
 
-#define _CONST64(c)	c##ull
-
-#include <asm/byteorder.h>
-
-#ifdef __BIG_ENDIAN
-#define endian_def_l2(e1, e2)	\
-	volatile unsigned long e1, e2
-#define endian_def_s2(e1, e2)	\
-	volatile unsigned short e1, e2
-#define endian_def_sb2(e1, e2, e3)	\
-	volatile unsigned short e1;volatile unsigned char e2, e3
-#define endian_def_b2s(e1, e2, e3)	\
-	volatile unsigned char e1, e2;volatile unsigned short e3
-#define endian_def_b4(e1, e2, e3, e4)	\
-	volatile unsigned char e1, e2, e3, e4
-#else
-#define endian_def_l2(e1, e2)	\
-	volatile unsigned long e2, e1
-#define endian_def_s2(e1, e2)	\
-	volatile unsigned short e2, e1
-#define endian_def_sb2(e1, e2, e3)	\
-	volatile unsigned char e3, e2;volatile unsigned short e1
-#define endian_def_b2s(e1, e2, e3)	\
-	volatile unsigned short e3;volatile unsigned char e2, e1
-#define endian_def_b4(e1, e2, e3, e4)	\
-	volatile unsigned char e4, e3, e2, e1
-#endif
-
-
-struct tx4938_sdramc_reg {
-	volatile unsigned long long cr[4];
-	volatile unsigned long long unused0[4];
-	volatile unsigned long long tr;
-	volatile unsigned long long unused1[2];
-	volatile unsigned long long cmd;
-	volatile unsigned long long sfcmd;
-};
-
-struct tx4938_ebusc_reg {
-	volatile unsigned long long cr[8];
-};
-
-struct tx4938_dma_reg {
-	struct tx4938_dma_ch_reg {
-		volatile unsigned long long cha;
-		volatile unsigned long long sar;
-		volatile unsigned long long dar;
-		endian_def_l2(unused0, cntr);
-		endian_def_l2(unused1, sair);
-		endian_def_l2(unused2, dair);
-		endian_def_l2(unused3, ccr);
-		endian_def_l2(unused4, csr);
-	} ch[4];
-	volatile unsigned long long dbr[8];
-	volatile unsigned long long tdhr;
-	volatile unsigned long long midr;
-	endian_def_l2(unused0, mcr);
-};
-
-struct tx4938_aclc_reg {
-	volatile unsigned long acctlen;
-	volatile unsigned long acctldis;
-	volatile unsigned long acregacc;
-	volatile unsigned long unused0;
-	volatile unsigned long acintsts;
-	volatile unsigned long acintmsts;
-	volatile unsigned long acinten;
-	volatile unsigned long acintdis;
-	volatile unsigned long acsemaph;
-	volatile unsigned long unused1[7];
-	volatile unsigned long acgpidat;
-	volatile unsigned long acgpodat;
-	volatile unsigned long acslten;
-	volatile unsigned long acsltdis;
-	volatile unsigned long acfifosts;
-	volatile unsigned long unused2[11];
-	volatile unsigned long acdmasts;
-	volatile unsigned long acdmasel;
-	volatile unsigned long unused3[6];
-	volatile unsigned long acaudodat;
-	volatile unsigned long acsurrdat;
-	volatile unsigned long accentdat;
-	volatile unsigned long aclfedat;
-	volatile unsigned long acaudiat;
-	volatile unsigned long unused4;
-	volatile unsigned long acmodoat;
-	volatile unsigned long acmodidat;
-	volatile unsigned long unused5[15];
-	volatile unsigned long acrevid;
-};
-
-
-struct tx4938_tmr_reg {
-	volatile unsigned long tcr;
-	volatile unsigned long tisr;
-	volatile unsigned long cpra;
-	volatile unsigned long cprb;
-	volatile unsigned long itmr;
-	volatile unsigned long unused0[3];
-	volatile unsigned long ccdr;
-	volatile unsigned long unused1[3];
-	volatile unsigned long pgmr;
-	volatile unsigned long unused2[3];
-	volatile unsigned long wtmr;
-	volatile unsigned long unused3[43];
-	volatile unsigned long trr;
-};
-
-struct tx4938_sio_reg {
-	volatile unsigned long lcr;
-	volatile unsigned long dicr;
-	volatile unsigned long disr;
-	volatile unsigned long cisr;
-	volatile unsigned long fcr;
-	volatile unsigned long flcr;
-	volatile unsigned long bgr;
-	volatile unsigned long tfifo;
-	volatile unsigned long rfifo;
-};
-
-struct tx4938_ndfmc_reg {
-	endian_def_l2(unused0, dtr);
-	endian_def_l2(unused1, mcr);
-	endian_def_l2(unused2, sr);
-	endian_def_l2(unused3, isr);
-	endian_def_l2(unused4, imr);
-	endian_def_l2(unused5, spr);
-	endian_def_l2(unused6, rstr);
-};
-
-struct tx4938_spi_reg {
-	volatile unsigned long mcr;
-	volatile unsigned long cr0;
-	volatile unsigned long cr1;
-	volatile unsigned long fs;
-	volatile unsigned long unused1;
-	volatile unsigned long sr;
-	volatile unsigned long dr;
-	volatile unsigned long unused2;
-};
-
 struct tx4938_sramc_reg {
-	volatile unsigned long long cr;
+	u64 cr;
 };
 
 struct tx4938_ccfg_reg {
@@ -209,34 +59,6 @@ struct tx4938_ccfg_reg {
 	u64 jmpadr;
 };
 
-#undef endian_def_l2
-#undef endian_def_s2
-#undef endian_def_sb2
-#undef endian_def_b2s
-#undef endian_def_b4
-
-/*
- * NDFMC
- */
-
-/* NDFMCR : NDFMC Mode Control */
-#define TX4938_NDFMCR_WE	0x80
-#define TX4938_NDFMCR_ECC_ALL	0x60
-#define TX4938_NDFMCR_ECC_RESET	0x60
-#define TX4938_NDFMCR_ECC_READ	0x40
-#define TX4938_NDFMCR_ECC_ON	0x20
-#define TX4938_NDFMCR_ECC_OFF	0x00
-#define TX4938_NDFMCR_CE	0x10
-#define TX4938_NDFMCR_BSPRT	0x04
-#define TX4938_NDFMCR_ALE	0x02
-#define TX4938_NDFMCR_CLE	0x01
-
-/* NDFMCR : NDFMC Status */
-#define TX4938_NDFSR_BUSY	0x80
-
-/* NDFMCR : NDFMC Reset */
-#define TX4938_NDFRSTR_RST	0x01
-
 /*
  * IRC
  */
@@ -268,13 +90,15 @@ struct tx4938_ccfg_reg {
 
 #define TX4938_IRC_INT	2	/* IP[2] in Status register */
 
+#define TX4938_NUM_PIO	16
+
 /*
  * CCFG
  */
 /* CCFG : Chip Configuration */
-#define TX4938_CCFG_WDRST	_CONST64(0x0000020000000000)
-#define TX4938_CCFG_WDREXEN	_CONST64(0x0000010000000000)
-#define TX4938_CCFG_BCFG_MASK	_CONST64(0x000000ff00000000)
+#define TX4938_CCFG_WDRST	0x0000020000000000ULL
+#define TX4938_CCFG_WDREXEN	0x0000010000000000ULL
+#define TX4938_CCFG_BCFG_MASK	0x000000ff00000000ULL
 #define TX4938_CCFG_TINTDIS	0x01000000
 #define TX4938_CCFG_PCI66	0x00800000
 #define TX4938_CCFG_PCIMODE	0x00400000
@@ -310,12 +134,12 @@ struct tx4938_ccfg_reg {
 #define TX4938_CCFG_ACEHOLD	0x00000001
 
 /* PCFG : Pin Configuration */
-#define TX4938_PCFG_ETH0_SEL	_CONST64(0x8000000000000000)
-#define TX4938_PCFG_ETH1_SEL	_CONST64(0x4000000000000000)
-#define TX4938_PCFG_ATA_SEL	_CONST64(0x2000000000000000)
-#define TX4938_PCFG_ISA_SEL	_CONST64(0x1000000000000000)
-#define TX4938_PCFG_SPI_SEL	_CONST64(0x0800000000000000)
-#define TX4938_PCFG_NDF_SEL	_CONST64(0x0400000000000000)
+#define TX4938_PCFG_ETH0_SEL	0x8000000000000000ULL
+#define TX4938_PCFG_ETH1_SEL	0x4000000000000000ULL
+#define TX4938_PCFG_ATA_SEL	0x2000000000000000ULL
+#define TX4938_PCFG_ISA_SEL	0x1000000000000000ULL
+#define TX4938_PCFG_SPI_SEL	0x0800000000000000ULL
+#define TX4938_PCFG_NDF_SEL	0x0400000000000000ULL
 #define TX4938_PCFG_SDCLKDLY_MASK	0x30000000
 #define TX4938_PCFG_SDCLKDLY(d)	((d)<<28)
 #define TX4938_PCFG_SYSCLKEN	0x08000000
@@ -336,8 +160,8 @@ struct tx4938_ccfg_reg {
 #define TX4938_PCFG_DMASEL3_SIO0	0x00000008
 
 /* CLKCTR : Clock Control */
-#define TX4938_CLKCTR_NDFCKD	_CONST64(0x0001000000000000)
-#define TX4938_CLKCTR_NDFRST	_CONST64(0x0000000100000000)
+#define TX4938_CLKCTR_NDFCKD	0x0001000000000000ULL
+#define TX4938_CLKCTR_NDFRST	0x0000000100000000ULL
 #define TX4938_CLKCTR_ETH1CKD	0x80000000
 #define TX4938_CLKCTR_ETH0CKD	0x40000000
 #define TX4938_CLKCTR_SPICKD	0x20000000
@@ -424,20 +248,16 @@ struct tx4938_ccfg_reg {
 #define TX4938_DMA_CSR_DESERR	0x00000002
 #define TX4938_DMA_CSR_SORERR	0x00000001
 
-#define tx4938_sdramcptr	((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG)
-#define tx4938_ebuscptr         ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG)
-#define tx4938_dmaptr(ch)	((struct tx4938_dma_reg *)TX4938_DMA_REG(ch))
-#define tx4938_ndfmcptr		((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG)
+#define tx4938_sdramcptr	tx4927_sdramcptr
+#define tx4938_ebuscptr		tx4927_ebuscptr
 #define tx4938_pcicptr		tx4927_pcicptr
 #define tx4938_pcic1ptr \
 		((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG)
 #define tx4938_ccfgptr \
 		((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG)
-#define tx4938_sioptr(ch)	((struct tx4938_sio_reg *)TX4938_SIO_REG(ch))
 #define tx4938_pioptr		((struct txx9_pio_reg __iomem *)TX4938_PIO_REG)
-#define tx4938_aclcptr		((struct tx4938_aclc_reg *)TX4938_ACLC_REG)
-#define tx4938_spiptr		((struct tx4938_spi_reg *)TX4938_SPI_REG)
-#define tx4938_sramcptr		((struct tx4938_sramc_reg *)TX4938_SRAMC_REG)
+#define tx4938_sramcptr \
+		((struct tx4938_sramc_reg __iomem *)TX4938_SRAMC_REG)
 
 
 #define TX4938_REV_PCODE()	\
@@ -447,19 +267,27 @@ struct tx4938_ccfg_reg {
 #define tx4938_ccfg_set(bits)	tx4927_ccfg_set(bits)
 #define tx4938_ccfg_change(change, new)	tx4927_ccfg_change(change, new)
 
-#define TX4938_SDRAMC_BA(ch)	((tx4938_sdramcptr->cr[ch] >> 49) << 21)
-#define TX4938_SDRAMC_SIZE(ch)	(((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21)
-
-#define TX4938_EBUSC_CR(ch)	__raw_readq(&tx4938_ebuscptr->cr[(ch)])
-#define TX4938_EBUSC_BA(ch)	((tx4938_ebuscptr->cr[ch] >> 48) << 20)
-#define TX4938_EBUSC_SIZE(ch)	\
-	(0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf))
-
+#define TX4938_SDRAMC_CR(ch)	TX4927_SDRAMC_CR(ch)
+#define TX4938_SDRAMC_BA(ch)	TX4927_SDRAMC_BA(ch)
+#define TX4938_SDRAMC_SIZE(ch)	TX4927_SDRAMC_SIZE(ch)
+
+#define TX4938_EBUSC_CR(ch)	TX4927_EBUSC_CR(ch)
+#define TX4938_EBUSC_BA(ch)	TX4927_EBUSC_BA(ch)
+#define TX4938_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
+
+#define tx4938_get_mem_size() tx4927_get_mem_size()
+void tx4938_wdt_init(void);
+void tx4938_setup(void);
+void tx4938_time_init(unsigned int tmrnr);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
 int tx4938_report_pciclk(void);
 void tx4938_report_pci1clk(void);
 int tx4938_pciclk66_setup(void);
 struct pci_dev;
 int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 
 #endif
diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h
deleted file mode 100644
index 97dd7ad1a890..000000000000
--- a/include/asm-mips/txx9/txx927.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
-	volatile unsigned long lcr;
-	volatile unsigned long dicr;
-	volatile unsigned long disr;
-	volatile unsigned long cisr;
-	volatile unsigned long fcr;
-	volatile unsigned long flcr;
-	volatile unsigned long bgr;
-	volatile unsigned long tfifo;
-	volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK	0x00000060
-#define TXx927_SILCR_SCS_IMCLK	0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG	0x00000020
-#define TXx927_SILCR_SCS_SCLK	0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG	0x00000060
-#define TXx927_SILCR_UEPS	0x00000010
-#define TXx927_SILCR_UPEN	0x00000008
-#define TXx927_SILCR_USBL_MASK	0x00000004
-#define TXx927_SILCR_USBL_1BIT	0x00000004
-#define TXx927_SILCR_USBL_2BIT	0x00000000
-#define TXx927_SILCR_UMODE_MASK	0x00000003
-#define TXx927_SILCR_UMODE_8BIT	0x00000000
-#define TXx927_SILCR_UMODE_7BIT	0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE	0x00008000
-#define TXx927_SIDICR_RDE	0x00004000
-#define TXx927_SIDICR_TIE	0x00002000
-#define TXx927_SIDICR_RIE	0x00001000
-#define TXx927_SIDICR_SPIE	0x00000800
-#define TXx927_SIDICR_CTSAC	0x00000600
-#define TXx927_SIDICR_STIE_MASK	0x0000003f
-#define TXx927_SIDICR_STIE_OERS		0x00000020
-#define TXx927_SIDICR_STIE_CTSS		0x00000010
-#define TXx927_SIDICR_STIE_RBRKD	0x00000008
-#define TXx927_SIDICR_STIE_TRDY		0x00000004
-#define TXx927_SIDICR_STIE_TXALS	0x00000002
-#define TXx927_SIDICR_STIE_UBRKD	0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK	0x00008000
-#define TXx927_SIDISR_UVALID	0x00004000
-#define TXx927_SIDISR_UFER	0x00002000
-#define TXx927_SIDISR_UPER	0x00001000
-#define TXx927_SIDISR_UOER	0x00000800
-#define TXx927_SIDISR_ERI	0x00000400
-#define TXx927_SIDISR_TOUT	0x00000200
-#define TXx927_SIDISR_TDIS	0x00000100
-#define TXx927_SIDISR_RDIS	0x00000080
-#define TXx927_SIDISR_STIS	0x00000040
-#define TXx927_SIDISR_RFDN_MASK	0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS	0x00000020
-#define TXx927_SICISR_CTSS	0x00000010
-#define TXx927_SICISR_RBRKD	0x00000008
-#define TXx927_SICISR_TRDY	0x00000004
-#define TXx927_SICISR_TXALS	0x00000002
-#define TXx927_SICISR_UBRKD	0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST	0x00008000
-#define TXx927_SIFCR_RDIL_MASK	0x00000180
-#define TXx927_SIFCR_RDIL_1	0x00000000
-#define TXx927_SIFCR_RDIL_4	0x00000080
-#define TXx927_SIFCR_RDIL_8	0x00000100
-#define TXx927_SIFCR_RDIL_12	0x00000180
-#define TXx927_SIFCR_RDIL_MAX	0x00000180
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_1	0x00000000
-#define TXx927_SIFCR_TDIL_4	0x00000001
-#define TXx927_SIFCR_TDIL_8	0x00000010
-#define TXx927_SIFCR_TDIL_MAX	0x00000010
-#define TXx927_SIFCR_TFRST	0x00000004
-#define TXx927_SIFCR_RFRST	0x00000002
-#define TXx927_SIFCR_FRSTE	0x00000001
-#define TXx927_SIO_TX_FIFO	8
-#define TXx927_SIO_RX_FIFO	16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS	0x00001000
-#define TXx927_SIFLCR_TES	0x00000800
-#define TXx927_SIFLCR_RTSSC	0x00000200
-#define TXx927_SIFLCR_RSDE	0x00000100
-#define TXx927_SIFLCR_TSDE	0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK	0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX	0x0000001e
-#define TXx927_SIFLCR_TBRK	0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK	0x00000300
-#define TXx927_SIBGR_BCLK_T0	0x00000000
-#define TXx927_SIBGR_BCLK_T2	0x00000100
-#define TXx927_SIBGR_BCLK_T4	0x00000200
-#define TXx927_SIBGR_BCLK_T6	0x00000300
-#define TXx927_SIBGR_BRD_MASK	0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */
diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h
index 1c439e51b875..5620879be37f 100644
--- a/include/asm-mips/txx9irq.h
+++ b/include/asm-mips/txx9irq.h
@@ -14,8 +14,12 @@
 #ifdef CONFIG_IRQ_CPU
 #define TXX9_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
 #else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE	(I8259A_IRQ_BASE + 16)
+#else
 #define TXX9_IRQ_BASE	0
 #endif
+#endif
 
 #ifdef CONFIG_CPU_TX39XX
 #define TXx9_MAX_IR 16
diff --git a/include/asm-mn10300/dma-mapping.h b/include/asm-mn10300/dma-mapping.h
index 7c882fca9ec8..ccae8f6c6326 100644
--- a/include/asm-mn10300/dma-mapping.h
+++ b/include/asm-mn10300/dma-mapping.h
@@ -182,7 +182,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 
 static inline
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-mn10300/ide.h b/include/asm-mn10300/ide.h
index dc235121ec42..6adcdd92e83d 100644
--- a/include/asm-mn10300/ide.h
+++ b/include/asm-mn10300/ide.h
@@ -23,10 +23,6 @@
 #undef SUPPORT_VLB_SYNC
 #define SUPPORT_VLB_SYNC 0
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS 8
-#endif
-
 /*
  * some bits needed for parts of the IDE subsystem to compile
  */
diff --git a/include/asm-mn10300/kvm.h b/include/asm-mn10300/kvm.h
deleted file mode 100644
index f6b609ff4a57..000000000000
--- a/include/asm-mn10300/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_MN10300_H
-#define __LINUX_KVM_MN10300_H
-
-/* mn10300 does not support KVM */
-
-#endif
diff --git a/include/asm-mn10300/namei.h b/include/asm-mn10300/namei.h
deleted file mode 100644
index bd9ce94aeb65..000000000000
--- a/include/asm-mn10300/namei.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Emulation stuff
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_NAMEI_H
-#define _ASM_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_NAMEI_H */
diff --git a/include/asm-mn10300/page.h b/include/asm-mn10300/page.h
index 124971b9fb9b..8288e124165b 100644
--- a/include/asm-mn10300/page.h
+++ b/include/asm-mn10300/page.h
@@ -61,9 +61,6 @@ typedef struct page *pgtable_t;
 
 #endif /* !__ASSEMBLY__ */
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
 /*
  * This handles the memory map.. We could make this a config
  * option, but too many people screw it up, and too few need
diff --git a/include/asm-mn10300/pci.h b/include/asm-mn10300/pci.h
index 205192c52bb5..cd9cc5c89cea 100644
--- a/include/asm-mn10300/pci.h
+++ b/include/asm-mn10300/pci.h
@@ -74,15 +74,6 @@ struct pci_dev;
 /* This is always fine. */
 #define pci_dac_dma_supported(pci_dev, mask)	(0)
 
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
 /* Return the index of the PCI controller for device. */
 static inline int pci_controller_num(struct pci_dev *dev)
 {
diff --git a/include/asm-mn10300/ptrace.h b/include/asm-mn10300/ptrace.h
index b3684689fcce..7b06cc623d8b 100644
--- a/include/asm-mn10300/ptrace.h
+++ b/include/asm-mn10300/ptrace.h
@@ -88,12 +88,16 @@ extern struct pt_regs *__frame; /* current frame pointer */
 /* options set using PTRACE_SETOPTIONS */
 #define PTRACE_O_TRACESYSGOOD     0x00000001
 
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+#if defined(__KERNEL__)
+
+#if !defined(__ASSEMBLY__)
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
 #define instruction_pointer(regs)	((regs)->pc)
 extern void show_regs(struct pt_regs *);
-#endif
+#endif  /*  !__ASSEMBLY  */
 
 #define profile_pc(regs) ((regs)->pc)
 
+#endif  /*  __KERNEL__  */
+
 #endif /* _ASM_PTRACE_H */
diff --git a/include/asm-mn10300/scatterlist.h b/include/asm-mn10300/scatterlist.h
index e29d91dbcf2b..67535901b9ff 100644
--- a/include/asm-mn10300/scatterlist.h
+++ b/include/asm-mn10300/scatterlist.h
@@ -43,4 +43,13 @@ struct scatterlist {
 
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
 #endif /* _ASM_SCATTERLIST_H */
diff --git a/include/asm-mn10300/semaphore.h b/include/asm-mn10300/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-mn10300/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-mn10300/thread_info.h b/include/asm-mn10300/thread_info.h
index e397e7192785..78a3881f3c12 100644
--- a/include/asm-mn10300/thread_info.h
+++ b/include/asm-mn10300/thread_info.h
@@ -112,6 +112,8 @@ static inline unsigned long current_stack_pointer(void)
 	return sp;
 }
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
 #define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h
index 3721aa9e195d..543a4f98695d 100644
--- a/include/asm-mn10300/unistd.h
+++ b/include/asm-mn10300/unistd.h
@@ -338,6 +338,12 @@
 #define __NR_fallocate		325
 #define __NR_timerfd_settime	326
 #define __NR_timerfd_gettime	327
+#define __NR_signalfd4		328
+#define __NR_eventfd2		329
+#define __NR_epoll_create1	330
+#define __NR_dup3		331
+#define __NR_pipe2		332
+#define __NR_inotify_init1	333
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-parisc/cacheflush.h b/include/asm-parisc/cacheflush.h
index 2f1e1b05440a..b7ca6dc7fddc 100644
--- a/include/asm-parisc/cacheflush.h
+++ b/include/asm-parisc/cacheflush.h
@@ -45,9 +45,9 @@ void flush_cache_mm(struct mm_struct *mm);
 extern void flush_dcache_page(struct page *page);
 
 #define flush_dcache_mmap_lock(mapping) \
-	write_lock_irq(&(mapping)->tree_lock)
+	spin_lock_irq(&(mapping)->tree_lock)
 #define flush_dcache_mmap_unlock(mapping) \
-	write_unlock_irq(&(mapping)->tree_lock)
+	spin_unlock_irq(&(mapping)->tree_lock)
 
 #define flush_icache_page(vma,page)	do { 		\
 	flush_kernel_dcache_page(page);			\
diff --git a/include/asm-parisc/dma-mapping.h b/include/asm-parisc/dma-mapping.h
index c6c0e9ff6bde..53af696f23d2 100644
--- a/include/asm-parisc/dma-mapping.h
+++ b/include/asm-parisc/dma-mapping.h
@@ -248,6 +248,6 @@ void * sba_get_iommu(struct parisc_device *dev);
 #endif
 
 /* At the moment, we panic on error for IOMMU resource exaustion */
-#define dma_mapping_error(x)	0
+#define dma_mapping_error(dev, x)	0
 
 #endif
diff --git a/include/asm-parisc/ide.h b/include/asm-parisc/ide.h
index db0c94410095..c246ef75017d 100644
--- a/include/asm-parisc/ide.h
+++ b/include/asm-parisc/ide.h
@@ -13,10 +13,6 @@
 
 #ifdef __KERNEL__
 
-#ifndef MAX_HWIFS
-#define MAX_HWIFS	2
-#endif
-
 #define ide_request_irq(irq,hand,flg,dev,id)	request_irq((irq),(hand),(flg),(dev),(id))
 #define ide_free_irq(irq,dev_id)		free_irq((irq), (dev_id))
 #define ide_request_region(from,extent,name)	request_region((from), (extent), (name))
diff --git a/include/asm-parisc/kvm.h b/include/asm-parisc/kvm.h
deleted file mode 100644
index 00cc45812547..000000000000
--- a/include/asm-parisc/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_PARISC_H
-#define __LINUX_KVM_PARISC_H
-
-/* parisc does not support KVM */
-
-#endif
diff --git a/include/asm-parisc/namei.h b/include/asm-parisc/namei.h
deleted file mode 100644
index 8d29b3d9fb33..000000000000
--- a/include/asm-parisc/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.1 1996/12/13 14:48:21 jj Exp $
- * linux/include/asm-parisc/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __PARISC_NAMEI_H
-#define __PARISC_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __PARISC_NAMEI_H */
diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h
index 27d50b859541..c3941f09a878 100644
--- a/include/asm-parisc/page.h
+++ b/include/asm-parisc/page.h
@@ -119,10 +119,6 @@ extern int npmem_ranges;
 #define PMD_ENTRY_SIZE	(1UL << BITS_PER_PMD_ENTRY)
 #define PTE_ENTRY_SIZE	(1UL << BITS_PER_PTE_ENTRY)
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-
 #define LINUX_GATEWAY_SPACE     0
 
 /* This governs the relationship between virtual and physical addresses.
diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h
index 93f990e418f1..3e94c5d85ff5 100644
--- a/include/asm-parisc/ptrace.h
+++ b/include/asm-parisc/ptrace.h
@@ -33,7 +33,6 @@ struct pt_regs {
 	unsigned long ipsw;	/* CR22 */
 };
 
-#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 /*
  * The numbers chosen here are somewhat arbitrary but absolutely MUST
  * not overlap with any of the number assigned in <linux/ptrace.h>.
@@ -43,8 +42,11 @@ struct pt_regs {
  * since we have taken branch traps too)
  */
 #define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+
 #ifdef __KERNEL__
 
+#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
+
 /* XXX should we use iaoq[1] or iaoq[0] ? */
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
 #define user_space(regs)		(((regs)->iasq[1] != 0) ? 1 : 0)
diff --git a/include/asm-parisc/semaphore.h b/include/asm-parisc/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-parisc/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-parisc/socket.h b/include/asm-parisc/socket.h
index 69a7a0d30b02..fba402c95ac2 100644
--- a/include/asm-parisc/socket.h
+++ b/include/asm-parisc/socket.h
@@ -54,4 +54,9 @@
 
 #define SO_MARK			0x401f
 
+/* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
+ * have to define SOCK_NONBLOCK to a different value here.
+ */
+#define SOCK_NONBLOCK   0x40000000
+
 #endif /* _ASM_SOCKET_H */
diff --git a/include/asm-parisc/thread_info.h b/include/asm-parisc/thread_info.h
index 2d9c7500867b..9f812741c355 100644
--- a/include/asm-parisc/thread_info.h
+++ b/include/asm-parisc/thread_info.h
@@ -34,15 +34,11 @@ struct thread_info {
 
 /* thread information allocation */
 
-#define THREAD_ORDER            2
+#define THREAD_SIZE_ORDER            2
 /* Be sure to hunt all references to this down when you change the size of
  * the kernel stack */
-#define THREAD_SIZE             (PAGE_SIZE << THREAD_ORDER)
-#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_ORDER)
-
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-			__get_free_pages(GFP_KERNEL, THREAD_ORDER))
-#define free_thread_info(ti)    free_pages((unsigned long) (ti), THREAD_ORDER)
+#define THREAD_SIZE             (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_SHIFT            (PAGE_SHIFT + THREAD_SIZE_ORDER)
 
 /* how to get the thread information struct from C */
 #define current_thread_info()	((struct thread_info *)mfctl(30))
diff --git a/include/asm-powerpc/8253pit.h b/include/asm-powerpc/8253pit.h
deleted file mode 100644
index b70d6e53b303..000000000000
--- a/include/asm-powerpc/8253pit.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASM_POWERPC_8253PIT_H
-#define _ASM_POWERPC_8253PIT_H
-
-/*
- * 8253/8254 Programmable Interval Timer
- */
-
-#define PIT_TICK_RATE	1193182UL
-
-#endif	/* _ASM_POWERPC_8253PIT_H */
diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h
deleted file mode 100644
index 4b0e15206006..000000000000
--- a/include/asm-powerpc/8xx_immap.h
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * MPC8xx Internal Memory Map
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * The I/O on the MPC860 is comprised of blocks of special registers
- * and the dual port ram for the Communication Processor Module.
- * Within this space are functional units such as the SIU, memory
- * controller, system timers, and other control functions.  It is
- * a combination that I found difficult to separate into logical
- * functional files.....but anyone else is welcome to try.  -- Dan
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_8XX__
-#define __IMMAP_8XX__
-
-/* System configuration registers.
-*/
-typedef	struct sys_conf {
-	uint	sc_siumcr;
-	uint	sc_sypcr;
-	uint	sc_swt;
-	char	res1[2];
-	ushort	sc_swsr;
-	uint	sc_sipend;
-	uint	sc_simask;
-	uint	sc_siel;
-	uint	sc_sivec;
-	uint	sc_tesr;
-	char	res2[0xc];
-	uint	sc_sdcr;
-	char	res3[0x4c];
-} sysconf8xx_t;
-
-/* PCMCIA configuration registers.
-*/
-typedef struct pcmcia_conf {
-	uint	pcmc_pbr0;
-	uint	pcmc_por0;
-	uint	pcmc_pbr1;
-	uint	pcmc_por1;
-	uint	pcmc_pbr2;
-	uint	pcmc_por2;
-	uint	pcmc_pbr3;
-	uint	pcmc_por3;
-	uint	pcmc_pbr4;
-	uint	pcmc_por4;
-	uint	pcmc_pbr5;
-	uint	pcmc_por5;
-	uint	pcmc_pbr6;
-	uint	pcmc_por6;
-	uint	pcmc_pbr7;
-	uint	pcmc_por7;
-	char	res1[0x20];
-	uint	pcmc_pgcra;
-	uint	pcmc_pgcrb;
-	uint	pcmc_pscr;
-	char	res2[4];
-	uint	pcmc_pipr;
-	char	res3[4];
-	uint	pcmc_per;
-	char	res4[4];
-} pcmconf8xx_t;
-
-/* Memory controller registers.
-*/
-typedef struct	mem_ctlr {
-	uint	memc_br0;
-	uint	memc_or0;
-	uint	memc_br1;
-	uint	memc_or1;
-	uint	memc_br2;
-	uint	memc_or2;
-	uint	memc_br3;
-	uint	memc_or3;
-	uint	memc_br4;
-	uint	memc_or4;
-	uint	memc_br5;
-	uint	memc_or5;
-	uint	memc_br6;
-	uint	memc_or6;
-	uint	memc_br7;
-	uint	memc_or7;
-	char	res1[0x24];
-	uint	memc_mar;
-	uint	memc_mcr;
-	char	res2[4];
-	uint	memc_mamr;
-	uint	memc_mbmr;
-	ushort	memc_mstat;
-	ushort	memc_mptpr;
-	uint	memc_mdr;
-	char	res3[0x80];
-} memctl8xx_t;
-
-/*-----------------------------------------------------------------------
- * BR - Memory Controler: Base Register					16-9
- */
-#define BR_BA_MSK	0xffff8000	/* Base Address Mask			*/
-#define BR_AT_MSK	0x00007000	/* Address Type Mask			*/
-#define BR_PS_MSK	0x00000c00	/* Port Size Mask			*/
-#define BR_PS_32	0x00000000	/* 32 bit port size			*/
-#define BR_PS_16	0x00000800	/* 16 bit port size			*/
-#define BR_PS_8		0x00000400	/*  8 bit port size			*/
-#define BR_PARE		0x00000200	/* Parity Enable			*/
-#define BR_WP		0x00000100	/* Write Protect			*/
-#define BR_MS_MSK	0x000000c0	/* Machine Select Mask			*/
-#define BR_MS_GPCM	0x00000000	/* G.P.C.M. Machine Select		*/
-#define BR_MS_UPMA	0x00000080	/* U.P.M.A Machine Select		*/
-#define BR_MS_UPMB	0x000000c0	/* U.P.M.B Machine Select		*/
-#define BR_V		0x00000001	/* Bank Valid				*/
-
-/*-----------------------------------------------------------------------
- * OR - Memory Controler: Option Register				16-11
- */
-#define OR_AM_MSK	0xffff8000	/* Address Mask Mask			*/
-#define OR_ATM_MSK	0x00007000	/* Address Type Mask Mask		*/
-#define OR_CSNT_SAM	0x00000800	/* Chip Select Negation Time/ Start	*/
-					/* Address Multiplex			*/
-#define OR_ACS_MSK	0x00000600	/* Address to Chip Select Setup mask	*/
-#define OR_ACS_DIV1	0x00000000	/* CS is output at the same time	*/
-#define OR_ACS_DIV4	0x00000400	/* CS is output 1/4 a clock later	*/
-#define OR_ACS_DIV2	0x00000600	/* CS is output 1/2 a clock later	*/
-#define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
-#define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
-#define OR_BI		0x00000100	/* Burst inhibit			*/
-#define OR_SCY_MSK	0x000000f0	/* Cycle Length in Clocks		*/
-#define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
-#define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
-#define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/
-#define OR_SCY_3_CLK	0x00000030	/* 3 clock cycles wait states		*/
-#define OR_SCY_4_CLK	0x00000040	/* 4 clock cycles wait states		*/
-#define OR_SCY_5_CLK	0x00000050	/* 5 clock cycles wait states		*/
-#define OR_SCY_6_CLK	0x00000060	/* 6 clock cycles wait states		*/
-#define OR_SCY_7_CLK	0x00000070	/* 7 clock cycles wait states		*/
-#define OR_SCY_8_CLK	0x00000080	/* 8 clock cycles wait states		*/
-#define OR_SCY_9_CLK	0x00000090	/* 9 clock cycles wait states		*/
-#define OR_SCY_10_CLK	0x000000a0	/* 10 clock cycles wait states		*/
-#define OR_SCY_11_CLK	0x000000b0	/* 11 clock cycles wait states		*/
-#define OR_SCY_12_CLK	0x000000c0	/* 12 clock cycles wait states		*/
-#define OR_SCY_13_CLK	0x000000d0	/* 13 clock cycles wait states		*/
-#define OR_SCY_14_CLK	0x000000e0	/* 14 clock cycles wait states		*/
-#define OR_SCY_15_CLK	0x000000f0	/* 15 clock cycles wait states		*/
-#define OR_SETA		0x00000008	/* External Transfer Acknowledge	*/
-#define OR_TRLX		0x00000004	/* Timing Relaxed			*/
-#define OR_EHTR		0x00000002	/* Extended Hold Time on Read		*/
-
-/* System Integration Timers.
-*/
-typedef struct	sys_int_timers {
-	ushort	sit_tbscr;
-	char	res0[0x02];
-	uint	sit_tbreff0;
-	uint	sit_tbreff1;
-	char	res1[0x14];
-	ushort	sit_rtcsc;
-	char	res2[0x02];
-	uint	sit_rtc;
-	uint	sit_rtsec;
-	uint	sit_rtcal;
-	char	res3[0x10];
-	ushort	sit_piscr;
-	char	res4[2];
-	uint	sit_pitc;
-	uint	sit_pitr;
-	char	res5[0x34];
-} sit8xx_t;
-
-#define TBSCR_TBIRQ_MASK	((ushort)0xff00)
-#define TBSCR_REFA		((ushort)0x0080)
-#define TBSCR_REFB		((ushort)0x0040)
-#define TBSCR_REFAE		((ushort)0x0008)
-#define TBSCR_REFBE		((ushort)0x0004)
-#define TBSCR_TBF		((ushort)0x0002)
-#define TBSCR_TBE		((ushort)0x0001)
-
-#define RTCSC_RTCIRQ_MASK	((ushort)0xff00)
-#define RTCSC_SEC		((ushort)0x0080)
-#define RTCSC_ALR		((ushort)0x0040)
-#define RTCSC_38K		((ushort)0x0010)
-#define RTCSC_SIE		((ushort)0x0008)
-#define RTCSC_ALE		((ushort)0x0004)
-#define RTCSC_RTF		((ushort)0x0002)
-#define RTCSC_RTE		((ushort)0x0001)
-
-#define PISCR_PIRQ_MASK		((ushort)0xff00)
-#define PISCR_PS		((ushort)0x0080)
-#define PISCR_PIE		((ushort)0x0004)
-#define PISCR_PTF		((ushort)0x0002)
-#define PISCR_PTE		((ushort)0x0001)
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
-	uint	car_sccr;
-	uint	car_plprcr;
-	uint	car_rsr;
-	char	res[0x74];        /* Reserved area                  */
-} car8xx_t;
-
-/* System Integration Timers keys.
-*/
-typedef struct sitk {
-	uint	sitk_tbscrk;
-	uint	sitk_tbreff0k;
-	uint	sitk_tbreff1k;
-	uint	sitk_tbk;
-	char	res1[0x10];
-	uint	sitk_rtcsck;
-	uint	sitk_rtck;
-	uint	sitk_rtseck;
-	uint	sitk_rtcalk;
-	char	res2[0x10];
-	uint	sitk_piscrk;
-	uint	sitk_pitck;
-	char	res3[0x38];
-} sitk8xx_t;
-
-/* Clocks and reset keys.
-*/
-typedef struct cark {
-	uint	cark_sccrk;
-	uint	cark_plprcrk;
-	uint	cark_rsrk;
-	char	res[0x474];
-} cark8xx_t;
-
-/* The key to unlock registers maintained by keep-alive power.
-*/
-#define KAPWR_KEY	((unsigned int)0x55ccaa33)
-
-/* Video interface.  MPC823 Only.
-*/
-typedef struct vid823 {
-	ushort	vid_vccr;
-	ushort	res1;
-	u_char	vid_vsr;
-	u_char	res2;
-	u_char	vid_vcmr;
-	u_char	res3;
-	uint	vid_vbcb;
-	uint	res4;
-	uint	vid_vfcr0;
-	uint	vid_vfaa0;
-	uint	vid_vfba0;
-	uint	vid_vfcr1;
-	uint	vid_vfaa1;
-	uint	vid_vfba1;
-	u_char	res5[0x18];
-} vid823_t;
-
-/* LCD interface.  823 Only.
-*/
-typedef struct lcd {
-	uint	lcd_lccr;
-	uint	lcd_lchcr;
-	uint	lcd_lcvcr;
-	char	res1[4];
-	uint	lcd_lcfaa;
-	uint	lcd_lcfba;
-	char	lcd_lcsr;
-	char	res2[0x7];
-} lcd823_t;
-
-/* I2C
-*/
-typedef struct i2c {
-	u_char	i2c_i2mod;
-	char	res1[3];
-	u_char	i2c_i2add;
-	char	res2[3];
-	u_char	i2c_i2brg;
-	char	res3[3];
-	u_char	i2c_i2com;
-	char	res4[3];
-	u_char	i2c_i2cer;
-	char	res5[3];
-	u_char	i2c_i2cmr;
-	char	res6[0x8b];
-} i2c8xx_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
-	char	res1[4];
-	uint	sdma_sdar;
-	u_char	sdma_sdsr;
-	char	res3[3];
-	u_char	sdma_sdmr;
-	char	res4[3];
-	u_char	sdma_idsr1;
-	char	res5[3];
-	u_char	sdma_idmr1;
-	char	res6[3];
-	u_char	sdma_idsr2;
-	char	res7[3];
-	u_char	sdma_idmr2;
-	char	res8[0x13];
-} sdma8xx_t;
-
-/* Communication Processor Module Interrupt Controller.
-*/
-typedef struct cpm_ic {
-	ushort	cpic_civr;
-	char	res[0xe];
-	uint	cpic_cicr;
-	uint	cpic_cipr;
-	uint	cpic_cimr;
-	uint	cpic_cisr;
-} cpic8xx_t;
-
-/* Input/Output Port control/status registers.
-*/
-typedef struct io_port {
-	ushort	iop_padir;
-	ushort	iop_papar;
-	ushort	iop_paodr;
-	ushort	iop_padat;
-	char	res1[8];
-	ushort	iop_pcdir;
-	ushort	iop_pcpar;
-	ushort	iop_pcso;
-	ushort	iop_pcdat;
-	ushort	iop_pcint;
-	char	res2[6];
-	ushort	iop_pddir;
-	ushort	iop_pdpar;
-	char	res3[2];
-	ushort	iop_pddat;
-	uint	utmode;
-	char	res4[4];
-} iop8xx_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
-	ushort	cpmt_tgcr;
-	char	res1[0xe];
-	ushort	cpmt_tmr1;
-	ushort	cpmt_tmr2;
-	ushort	cpmt_trr1;
-	ushort	cpmt_trr2;
-	ushort	cpmt_tcr1;
-	ushort	cpmt_tcr2;
-	ushort	cpmt_tcn1;
-	ushort	cpmt_tcn2;
-	ushort	cpmt_tmr3;
-	ushort	cpmt_tmr4;
-	ushort	cpmt_trr3;
-	ushort	cpmt_trr4;
-	ushort	cpmt_tcr3;
-	ushort	cpmt_tcr4;
-	ushort	cpmt_tcn3;
-	ushort	cpmt_tcn4;
-	ushort	cpmt_ter1;
-	ushort	cpmt_ter2;
-	ushort	cpmt_ter3;
-	ushort	cpmt_ter4;
-	char	res2[8];
-} cpmtimer8xx_t;
-
-/* Finally, the Communication Processor stuff.....
-*/
-typedef struct scc {		/* Serial communication channels */
-	uint	scc_gsmrl;
-	uint	scc_gsmrh;
-	ushort	scc_psmr;
-	char	res1[2];
-	ushort	scc_todr;
-	ushort	scc_dsr;
-	ushort	scc_scce;
-	char	res2[2];
-	ushort	scc_sccm;
-	char	res3;
-	u_char	scc_sccs;
-	char	res4[8];
-} scc_t;
-
-typedef struct smc {		/* Serial management channels */
-	char	res1[2];
-	ushort	smc_smcmr;
-	char	res2[2];
-	u_char	smc_smce;
-	char	res3[3];
-	u_char	smc_smcm;
-	char	res4[5];
-} smc_t;
-
-/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
- * it fits within the address space.
- */
-
-typedef struct fec {
-	uint	fec_addr_low;		/* lower 32 bits of station address	*/
-	ushort	fec_addr_high;		/* upper 16 bits of station address	*/
-	ushort	res1;			/* reserved				*/
-	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
-	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
-	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
-	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
-	uint	fec_r_buff_size;	/* Rx buffer size			*/
-	uint	res2[9];		/* reserved				*/
-	uint	fec_ecntrl;		/* ethernet control register		*/
-	uint	fec_ievent;		/* interrupt event register		*/
-	uint	fec_imask;		/* interrupt mask register		*/
-	uint	fec_ivec;		/* interrupt level and vector status	*/
-	uint	fec_r_des_active;	/* Rx ring updated flag			*/
-	uint	fec_x_des_active;	/* Tx ring updated flag			*/
-	uint	res3[10];		/* reserved				*/
-	uint	fec_mii_data;		/* MII data register			*/
-	uint	fec_mii_speed;		/* MII speed control register		*/
-	uint	res4[17];		/* reserved				*/
-	uint	fec_r_bound;		/* end of RAM (read-only)		*/
-	uint	fec_r_fstart;		/* Rx FIFO start address		*/
-	uint	res5[6];		/* reserved				*/
-	uint	fec_x_fstart;		/* Tx FIFO start address		*/
-	uint	res6[17];		/* reserved				*/
-	uint	fec_fun_code;		/* fec SDMA function code		*/
-	uint	res7[3];		/* reserved				*/
-	uint	fec_r_cntrl;		/* Rx control register			*/
-	uint	fec_r_hash;		/* Rx hash register			*/
-	uint	res8[14];		/* reserved				*/
-	uint	fec_x_cntrl;		/* Tx control register			*/
-	uint	res9[0x1e];		/* reserved				*/
-} fec_t;
-
-/* The FEC and LCD color map share the same address space....
- * I guess we will never see an 823T :-).
- */
-union fec_lcd {
-	fec_t	fl_un_fec;
-	u_char	fl_un_cmap[0x200];
-};
-
-typedef struct comm_proc {
-	/* General control and status registers.
-	*/
-	ushort	cp_cpcr;
-	u_char	res1[2];
-	ushort	cp_rccr;
-	u_char	res2;
-	u_char	cp_rmds;
-	u_char	res3[4];
-	ushort	cp_cpmcr1;
-	ushort	cp_cpmcr2;
-	ushort	cp_cpmcr3;
-	ushort	cp_cpmcr4;
-	u_char	res4[2];
-	ushort	cp_rter;
-	u_char	res5[2];
-	ushort	cp_rtmr;
-	u_char	res6[0x14];
-
-	/* Baud rate generators.
-	*/
-	uint	cp_brgc1;
-	uint	cp_brgc2;
-	uint	cp_brgc3;
-	uint	cp_brgc4;
-
-	/* Serial Communication Channels.
-	*/
-	scc_t	cp_scc[4];
-
-	/* Serial Management Channels.
-	*/
-	smc_t	cp_smc[2];
-
-	/* Serial Peripheral Interface.
-	*/
-	ushort	cp_spmode;
-	u_char	res7[4];
-	u_char	cp_spie;
-	u_char	res8[3];
-	u_char	cp_spim;
-	u_char	res9[2];
-	u_char	cp_spcom;
-	u_char	res10[2];
-
-	/* Parallel Interface Port.
-	*/
-	u_char	res11[2];
-	ushort	cp_pipc;
-	u_char	res12[2];
-	ushort	cp_ptpr;
-	uint	cp_pbdir;
-	uint	cp_pbpar;
-	u_char	res13[2];
-	ushort	cp_pbodr;
-	uint	cp_pbdat;
-
-	/* Port E - MPC87x/88x only.
-	 */
-	uint	cp_pedir;
-	uint	cp_pepar;
-	uint	cp_peso;
-	uint	cp_peodr;
-	uint	cp_pedat;
-
-	/* Communications Processor Timing Register -
-	   Contains RMII Timing for the FECs on MPC87x/88x only.
-	*/
-	uint	cp_cptr;
-
-	/* Serial Interface and Time Slot Assignment.
-	*/
-	uint	cp_simode;
-	u_char	cp_sigmr;
-	u_char	res15;
-	u_char	cp_sistr;
-	u_char	cp_sicmr;
-	u_char	res16[4];
-	uint	cp_sicr;
-	uint	cp_sirp;
-	u_char	res17[0xc];
-
-	/* 256 bytes of MPC823 video controller RAM array.
-	*/
-	u_char	cp_vcram[0x100];
-	u_char	cp_siram[0x200];
-
-	/* The fast ethernet controller is not really part of the CPM,
-	 * but it resides in the address space.
-	 * The LCD color map is also here.
-	 */
-	union	fec_lcd	fl_un;
-#define cp_fec		fl_un.fl_un_fec
-#define lcd_cmap	fl_un.fl_un_cmap
-	char	res18[0xE00];
-
-	/* The DUET family has a second FEC here */
-	fec_t	cp_fec2;
-#define cp_fec1	cp_fec	/* consistency macro */
-
-	/* Dual Ported RAM follows.
-	 * There are many different formats for this memory area
-	 * depending upon the devices used and options chosen.
-	 * Some processors don't have all of it populated.
-	 */
-	u_char	cp_dpmem[0x1C00];	/* BD / Data / ucode */
-	u_char	cp_dparam[0x400];	/* Parameter RAM */
-} cpm8xx_t;
-
-/* Internal memory map.
-*/
-typedef struct immap {
-	sysconf8xx_t	im_siu_conf;	/* SIU Configuration */
-	pcmconf8xx_t	im_pcmcia;	/* PCMCIA Configuration */
-	memctl8xx_t	im_memctl;	/* Memory Controller */
-	sit8xx_t	im_sit;		/* System integration timers */
-	car8xx_t	im_clkrst;	/* Clocks and reset */
-	sitk8xx_t	im_sitk;	/* Sys int timer keys */
-	cark8xx_t	im_clkrstk;	/* Clocks and reset keys */
-	vid823_t	im_vid;		/* Video (823 only) */
-	lcd823_t	im_lcd;		/* LCD (823 only) */
-	i2c8xx_t	im_i2c;		/* I2C control/status */
-	sdma8xx_t	im_sdma;	/* SDMA control/status */
-	cpic8xx_t	im_cpic;	/* CPM Interrupt Controller */
-	iop8xx_t	im_ioport;	/* IO Port control/status */
-	cpmtimer8xx_t	im_cpmtimer;	/* CPM timers */
-	cpm8xx_t	im_cpm;		/* Communication processor */
-} immap_t;
-
-#endif /* __IMMAP_8XX__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild
deleted file mode 100644
index 04ce8f8a2ee7..000000000000
--- a/include/asm-powerpc/Kbuild
+++ /dev/null
@@ -1,38 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += ioctls.h
-header-y += sembuf.h
-header-y += siginfo.h
-header-y += stat.h
-header-y += errno.h
-header-y += ipcbuf.h
-header-y += msgbuf.h
-header-y += shmbuf.h
-header-y += socket.h
-header-y += termbits.h
-header-y += fcntl.h
-header-y += poll.h
-header-y += sockios.h
-header-y += ucontext.h
-header-y += ioctl.h
-header-y += linkage.h
-header-y += resource.h
-header-y += sigcontext.h
-header-y += statfs.h
-header-y += ps3fb.h
-
-unifdef-y += bootx.h
-unifdef-y += byteorder.h
-unifdef-y += cputable.h
-unifdef-y += elf.h
-unifdef-y += nvram.h
-unifdef-y += param.h
-unifdef-y += posix_types.h
-unifdef-y += ptrace.h
-unifdef-y += seccomp.h
-unifdef-y += signal.h
-unifdef-y += spu_info.h
-unifdef-y += termios.h
-unifdef-y += types.h
-unifdef-y += unistd.h
diff --git a/include/asm-powerpc/a.out.h b/include/asm-powerpc/a.out.h
deleted file mode 100644
index 89cead6b176e..000000000000
--- a/include/asm-powerpc/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_A_OUT_H
-#define _ASM_POWERPC_A_OUT_H
-
-struct exec
-{
-	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
-	unsigned a_text;	/* length of text, in bytes */
-	unsigned a_data;	/* length of data, in bytes */
-	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-	unsigned a_syms;	/* length of symbol table data in file, in bytes */
-	unsigned a_entry;	/* start address */
-	unsigned a_trsize;	/* length of relocation info for text, in bytes */
-	unsigned a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* _ASM_POWERPC_A_OUT_H */
diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h
deleted file mode 100644
index 98324c5a8286..000000000000
--- a/include/asm-powerpc/abs_addr.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _ASM_POWERPC_ABS_ADDR_H
-#define _ASM_POWERPC_ABS_ADDR_H
-#ifdef __KERNEL__
-
-
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/lmb.h>
-
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/firmware.h>
-
-struct mschunks_map {
-        unsigned long num_chunks;
-        unsigned long chunk_size;
-        unsigned long chunk_shift;
-        unsigned long chunk_mask;
-        u32 *mapping;
-};
-
-extern struct mschunks_map mschunks_map;
-
-/* Chunks are 256 KB */
-#define MSCHUNKS_CHUNK_SHIFT	(18)
-#define MSCHUNKS_CHUNK_SIZE	(1UL << MSCHUNKS_CHUNK_SHIFT)
-#define MSCHUNKS_OFFSET_MASK	(MSCHUNKS_CHUNK_SIZE - 1)
-
-static inline unsigned long chunk_to_addr(unsigned long chunk)
-{
-	return chunk << MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long addr_to_chunk(unsigned long addr)
-{
-	return addr >> MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long phys_to_abs(unsigned long pa)
-{
-	unsigned long chunk;
-
-	/* This is a no-op on non-iSeries */
-	if (!firmware_has_feature(FW_FEATURE_ISERIES))
-		return pa;
-
-	chunk = addr_to_chunk(pa);
-
-	if (chunk < mschunks_map.num_chunks)
-		chunk = mschunks_map.mapping[chunk];
-
-	return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
-}
-
-/* Convenience macros */
-#define virt_to_abs(va) phys_to_abs(__pa(va))
-#define abs_to_virt(aa) __va(aa)
-
-/*
- * Converts Virtual Address to Real Address for
- * Legacy iSeries Hypervisor calls
- */
-#define iseries_hv_addr(virtaddr)	\
-	(0x8000000000000000 | virt_to_abs(virtaddr))
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/include/asm-powerpc/agp.h b/include/asm-powerpc/agp.h
deleted file mode 100644
index 86455c4c31ee..000000000000
--- a/include/asm-powerpc/agp.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_POWERPC_AGP_H
-#define _ASM_POWERPC_AGP_H
-#ifdef __KERNEL__
-
-#include <asm/io.h>
-
-#define map_page_into_agp(page)
-#define unmap_page_from_agp(page)
-#define flush_agp_cache() mb()
-
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_AGP_H */
diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h
deleted file mode 100644
index 8ec2e1da68bf..000000000000
--- a/include/asm-powerpc/asm-compat.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _ASM_POWERPC_ASM_COMPAT_H
-#define _ASM_POWERPC_ASM_COMPAT_H
-
-#include <asm/types.h>
-
-#ifdef __ASSEMBLY__
-#  define stringify_in_c(...)	__VA_ARGS__
-#  define ASM_CONST(x)		x
-#else
-/* This version of stringify will deal with commas... */
-#  define __stringify_in_c(...)	#__VA_ARGS__
-#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
-#  define __ASM_CONST(x)	x##UL
-#  define ASM_CONST(x)		__ASM_CONST(x)
-#endif
-
-
-#ifdef __powerpc64__
-
-/* operations for longs and pointers */
-#define PPC_LL		stringify_in_c(ld)
-#define PPC_STL		stringify_in_c(std)
-#define PPC_LCMPI	stringify_in_c(cmpdi)
-#define PPC_LONG	stringify_in_c(.llong)
-#define PPC_TLNEI	stringify_in_c(tdnei)
-#define PPC_LLARX	stringify_in_c(ldarx)
-#define PPC_STLCX	stringify_in_c(stdcx.)
-#define PPC_CNTLZL	stringify_in_c(cntlzd)
-
-/* Move to CR, single-entry optimized version. Only available
- * on POWER4 and later.
- */
-#ifdef CONFIG_POWER4_ONLY
-#define PPC_MTOCRF	stringify_in_c(mtocrf)
-#else
-#define PPC_MTOCRF	stringify_in_c(mtcrf)
-#endif
-
-#else /* 32-bit */
-
-/* operations for longs and pointers */
-#define PPC_LL		stringify_in_c(lwz)
-#define PPC_STL		stringify_in_c(stw)
-#define PPC_LCMPI	stringify_in_c(cmpwi)
-#define PPC_LONG	stringify_in_c(.long)
-#define PPC_TLNEI	stringify_in_c(twnei)
-#define PPC_LLARX	stringify_in_c(lwarx)
-#define PPC_STLCX	stringify_in_c(stwcx.)
-#define PPC_CNTLZL	stringify_in_c(cntlzw)
-#define PPC_MTOCRF	stringify_in_c(mtcrf)
-
-#endif
-
-#ifdef __KERNEL__
-#ifdef CONFIG_IBM405_ERR77
-/* Erratum #77 on the 405 means we need a sync or dcbt before every
- * stwcx.  The old ATOMIC_SYNC_FIX covered some but not all of this.
- */
-#define PPC405_ERR77(ra,rb)	stringify_in_c(dcbt	ra, rb;)
-#define	PPC405_ERR77_SYNC	stringify_in_c(sync;)
-#else
-#define PPC405_ERR77(ra,rb)
-#define PPC405_ERR77_SYNC
-#endif
-#endif
-
-#endif /* _ASM_POWERPC_ASM_COMPAT_H */
diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h
deleted file mode 100644
index f3fc733758f5..000000000000
--- a/include/asm-powerpc/atomic.h
+++ /dev/null
@@ -1,479 +0,0 @@
-#ifndef _ASM_POWERPC_ATOMIC_H_
-#define _ASM_POWERPC_ATOMIC_H_
-
-/*
- * PowerPC atomic operations
- */
-
-typedef struct { int counter; } atomic_t;
-
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <asm/synch.h>
-#include <asm/asm-compat.h>
-#include <asm/system.h>
-
-#define ATOMIC_INIT(i)		{ (i) }
-
-static __inline__ int atomic_read(const atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
-
-	return t;
-}
-
-static __inline__ void atomic_set(atomic_t *v, int i)
-{
-	__asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
-}
-
-static __inline__ void atomic_add(int a, atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-"1:	lwarx	%0,0,%3		# atomic_add\n\
-	add	%0,%2,%0\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%0,0,%3 \n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (a), "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ int atomic_add_return(int a, atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%2		# atomic_add_return\n\
-	add	%0,%1,%0\n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%0,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (a), "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-
-static __inline__ void atomic_sub(int a, atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-"1:	lwarx	%0,0,%3		# atomic_sub\n\
-	subf	%0,%2,%0\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%0,0,%3 \n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (a), "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ int atomic_sub_return(int a, atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%2		# atomic_sub_return\n\
-	subf	%0,%1,%0\n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%0,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (a), "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-static __inline__ void atomic_inc(atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-"1:	lwarx	%0,0,%2		# atomic_inc\n\
-	addic	%0,%0,1\n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%0,0,%2 \n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ int atomic_inc_return(atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%1		# atomic_inc_return\n\
-	addic	%0,%0,1\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-static __inline__ void atomic_dec(atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-"1:	lwarx	%0,0,%2		# atomic_dec\n\
-	addic	%0,%0,-1\n"
-	PPC405_ERR77(0,%2)\
-"	stwcx.	%0,0,%2\n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ int atomic_dec_return(atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%1		# atomic_dec_return\n\
-	addic	%0,%0,-1\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int t;
-
-	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%1		# atomic_add_unless\n\
-	cmpw	0,%0,%3 \n\
-	beq-	2f \n\
-	add	%0,%2,%0 \n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%0,0,%1 \n\
-	bne-	1b \n"
-	ISYNC_ON_SMP
-"	subf	%0,%2,%0 \n\
-2:"
-	: "=&r" (t)
-	: "r" (&v->counter), "r" (a), "r" (u)
-	: "cc", "memory");
-
-	return t != u;
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_sub_and_test(a, v)	(atomic_sub_return((a), (v)) == 0)
-#define atomic_dec_and_test(v)		(atomic_dec_return((v)) == 0)
-
-/*
- * Atomically test *v and decrement if it is greater than 0.
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
-static __inline__ int atomic_dec_if_positive(atomic_t *v)
-{
-	int t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
-	cmpwi	%0,1\n\
-	addi	%0,%0,-1\n\
-	blt-	2f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	"\n\
-2:"	: "=&b" (t)
-	: "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-#define smp_mb__before_atomic_dec()     smp_mb()
-#define smp_mb__after_atomic_dec()      smp_mb()
-#define smp_mb__before_atomic_inc()     smp_mb()
-#define smp_mb__after_atomic_inc()      smp_mb()
-
-#ifdef __powerpc64__
-
-typedef struct { long counter; } atomic64_t;
-
-#define ATOMIC64_INIT(i)	{ (i) }
-
-static __inline__ long atomic64_read(const atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
-
-	return t;
-}
-
-static __inline__ void atomic64_set(atomic64_t *v, long i)
-{
-	__asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
-}
-
-static __inline__ void atomic64_add(long a, atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:	ldarx	%0,0,%3		# atomic64_add\n\
-	add	%0,%2,%0\n\
-	stdcx.	%0,0,%3 \n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (a), "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ long atomic64_add_return(long a, atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%2		# atomic64_add_return\n\
-	add	%0,%1,%0\n\
-	stdcx.	%0,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (a), "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
-
-static __inline__ void atomic64_sub(long a, atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:	ldarx	%0,0,%3		# atomic64_sub\n\
-	subf	%0,%2,%0\n\
-	stdcx.	%0,0,%3 \n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (a), "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
-	subf	%0,%1,%0\n\
-	stdcx.	%0,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (a), "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-static __inline__ void atomic64_inc(atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:	ldarx	%0,0,%2		# atomic64_inc\n\
-	addic	%0,%0,1\n\
-	stdcx.	%0,0,%2 \n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ long atomic64_inc_return(atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
-	addic	%0,%0,1\n\
-	stdcx.	%0,0,%1 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-/*
- * atomic64_inc_and_test - increment and test
- * @v: pointer of type atomic64_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
-
-static __inline__ void atomic64_dec(atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:	ldarx	%0,0,%2		# atomic64_dec\n\
-	addic	%0,%0,-1\n\
-	stdcx.	%0,0,%2\n\
-	bne-	1b"
-	: "=&r" (t), "+m" (v->counter)
-	: "r" (&v->counter)
-	: "cc");
-}
-
-static __inline__ long atomic64_dec_return(atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
-	addic	%0,%0,-1\n\
-	stdcx.	%0,0,%1\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (t)
-	: "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
-#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
-
-/*
- * Atomically test *v and decrement if it is greater than 0.
- * The function returns the old value of *v minus 1.
- */
-static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
-{
-	long t;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
-	addic.	%0,%0,-1\n\
-	blt-	2f\n\
-	stdcx.	%0,0,%1\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	"\n\
-2:"	: "=&r" (t)
-	: "r" (&v->counter)
-	: "cc", "memory");
-
-	return t;
-}
-
-#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * atomic64_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
-{
-	long t;
-
-	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%1		# atomic_add_unless\n\
-	cmpd	0,%0,%3 \n\
-	beq-	2f \n\
-	add	%0,%2,%0 \n"
-"	stdcx.	%0,0,%1 \n\
-	bne-	1b \n"
-	ISYNC_ON_SMP
-"	subf	%0,%2,%0 \n\
-2:"
-	: "=&r" (t)
-	: "r" (&v->counter), "r" (a), "r" (u)
-	: "cc", "memory");
-
-	return t != u;
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#endif /* __powerpc64__ */
-
-#include <asm-generic/atomic.h>
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_ATOMIC_H_ */
diff --git a/include/asm-powerpc/auxvec.h b/include/asm-powerpc/auxvec.h
deleted file mode 100644
index 19a099b62cd6..000000000000
--- a/include/asm-powerpc/auxvec.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_POWERPC_AUXVEC_H
-#define _ASM_POWERPC_AUXVEC_H
-
-/*
- * We need to put in some extra aux table entries to tell glibc what
- * the cache block size is, so it can use the dcbz instruction safely.
- */
-#define AT_DCACHEBSIZE		19
-#define AT_ICACHEBSIZE		20
-#define AT_UCACHEBSIZE		21
-/* A special ignored type value for PPC, for glibc compatibility.  */
-#define AT_IGNOREPPC		22
-
-/* The vDSO location. We have to use the same value as x86 for glibc's
- * sake :-)
- */
-#define AT_SYSINFO_EHDR		33
-
-#endif
diff --git a/include/asm-powerpc/backlight.h b/include/asm-powerpc/backlight.h
deleted file mode 100644
index 8cf5c37c3817..000000000000
--- a/include/asm-powerpc/backlight.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Routines for handling backlight control on PowerBooks
- *
- * For now, implementation resides in
- * arch/powerpc/platforms/powermac/backlight.c
- *
- */
-#ifndef __ASM_POWERPC_BACKLIGHT_H
-#define __ASM_POWERPC_BACKLIGHT_H
-#ifdef __KERNEL__
-
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-/* For locking instructions, see the implementation file */
-extern struct backlight_device *pmac_backlight;
-extern struct mutex pmac_backlight_mutex;
-
-extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
-
-extern int pmac_has_backlight_type(const char *type);
-
-extern void pmac_backlight_key(int direction);
-static inline void pmac_backlight_key_up(void)
-{
-	pmac_backlight_key(0);
-}
-static inline void pmac_backlight_key_down(void)
-{
-	pmac_backlight_key(1);
-}
-
-extern void pmac_backlight_set_legacy_brightness_pmu(int brightness);
-extern int pmac_backlight_set_legacy_brightness(int brightness);
-extern int pmac_backlight_get_legacy_brightness(void);
-
-extern void pmac_backlight_enable(void);
-extern void pmac_backlight_disable(void);
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h
deleted file mode 100644
index 897eade3afbe..000000000000
--- a/include/asm-powerpc/bitops.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * PowerPC atomic bit operations.
- *
- * Merged version by David Gibson <david@gibson.dropbear.id.au>.
- * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don
- * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard.  They
- * originally took it from the ppc32 code.
- *
- * Within a word, bits are numbered LSB first.  Lot's of places make
- * this assumption by directly testing bits with (val & (1<<nr)).
- * This can cause confusion for large (> 1 word) bitmaps on a
- * big-endian system because, unlike little endian, the number of each
- * bit depends on the word size.
- *
- * The bitop functions are defined to work on unsigned longs, so for a
- * ppc64 system the bits end up numbered:
- *   |63..............0|127............64|191...........128|255...........196|
- * and on ppc32:
- *   |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224|
- *
- * There are a few little-endian macros used mostly for filesystem
- * bitmaps, these work on similar bit arrays layouts, but
- * byte-oriented:
- *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
- *
- * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
- * number field needs to be reversed compared to the big-endian bit
- * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_BITOPS_H
-#define _ASM_POWERPC_BITOPS_H
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/asm-compat.h>
-#include <asm/synch.h>
-
-/*
- * clear_bit doesn't imply a memory barrier
- */
-#define smp_mb__before_clear_bit()	smp_mb()
-#define smp_mb__after_clear_bit()	smp_mb()
-
-#define BITOP_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
-#define BITOP_WORD(nr)		((nr) / BITS_PER_LONG)
-#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
-
-static __inline__ void set_bit(int nr, volatile unsigned long *addr)
-{
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# set_bit\n"
-	"or	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
-}
-
-static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
-{
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# clear_bit\n"
-	"andc	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
-}
-
-static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
-{
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3	# clear_bit_unlock\n"
-	"andc	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-}
-
-static __inline__ void change_bit(int nr, volatile unsigned long *addr)
-{
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# change_bit\n"
-	"xor	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
-}
-
-static __inline__ int test_and_set_bit(unsigned long nr,
-				       volatile unsigned long *addr)
-{
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit\n"
-	"or	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
-}
-
-static __inline__ int test_and_set_bit_lock(unsigned long nr,
-				       volatile unsigned long *addr)
-{
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit_lock\n"
-	"or	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
-}
-
-static __inline__ int test_and_clear_bit(unsigned long nr,
-					 volatile unsigned long *addr)
-{
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_clear_bit\n"
-	"andc	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
-}
-
-static __inline__ int test_and_change_bit(unsigned long nr,
-					  volatile unsigned long *addr)
-{
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_change_bit\n"
-	"xor	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
-}
-
-static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
-{
-        unsigned long old;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3         # set_bits\n"
-	"or	%0,%0,%2\n"
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*addr)
-	: "r" (mask), "r" (addr)
-	: "cc");
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
-{
-	__asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
-	__clear_bit(nr, addr);
-}
-
-/*
- * Return the zero-based bit position (LE, not IBM bit numbering) of
- * the most significant 1-bit in a double word.
- */
-static __inline__ __attribute__((const))
-int __ilog2(unsigned long x)
-{
-	int lz;
-
-	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x));
-	return BITS_PER_LONG - 1 - lz;
-}
-
-static inline __attribute__((const))
-int __ilog2_u32(u32 n)
-{
-	int bit;
-	asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n));
-	return 31 - bit;
-}
-
-#ifdef __powerpc64__
-static inline __attribute__((const))
-int __ilog2_u64(u64 n)
-{
-	int bit;
-	asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n));
-	return 63 - bit;
-}
-#endif
-
-/*
- * Determines the bit position of the least significant 0 bit in the
- * specified double word. The returned bit position will be
- * zero-based, starting from the right side (63/31 - 0).
- */
-static __inline__ unsigned long ffz(unsigned long x)
-{
-	/* no zero exists anywhere in the 8 byte area. */
-	if ((x = ~x) == 0)
-		return BITS_PER_LONG;
-
-	/*
-	 * Calculate the bit position of the least signficant '1' bit in x
-	 * (since x has been changed this will actually be the least signficant
-	 * '0' bit in * the original x).  Note: (x & -x) gives us a mask that
-	 * is the least significant * (RIGHT-most) 1-bit of the value in x.
-	 */
-	return __ilog2(x & -x);
-}
-
-static __inline__ int __ffs(unsigned long x)
-{
-	return __ilog2(x & -x);
-}
-
-/*
- * ffs: find first bit set. This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static __inline__ int ffs(int x)
-{
-	unsigned long i = (unsigned long)x;
-	return __ilog2(i & -i) + 1;
-}
-
-/*
- * fls: find last (most-significant) bit set.
- * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
- */
-static __inline__ int fls(unsigned int x)
-{
-	int lz;
-
-	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
-	return 32 - lz;
-}
-
-static __inline__ unsigned long __fls(unsigned long x)
-{
-	return __ilog2(x);
-}
-
-/*
- * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
- * instruction; for 32-bit we use the generic version, which does two
- * 32-bit fls calls.
- */
-#ifdef __powerpc64__
-static __inline__ int fls64(__u64 x)
-{
-	int lz;
-
-	asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
-	return 64 - lz;
-}
-#else
-#include <asm-generic/bitops/fls64.h>
-#endif /* __powerpc64__ */
-
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/find.h>
-
-/* Little-endian versions */
-
-static __inline__ int test_le_bit(unsigned long nr,
-				  __const__ unsigned long *addr)
-{
-	__const__ unsigned char	*tmp = (__const__ unsigned char *) addr;
-	return (tmp[nr >> 3] >> (nr & 7)) & 1;
-}
-
-#define __set_le_bit(nr, addr) \
-	__set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-#define __clear_le_bit(nr, addr) \
-	__clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-
-#define test_and_set_le_bit(nr, addr) \
-	test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-#define test_and_clear_le_bit(nr, addr) \
-	test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-
-#define __test_and_set_le_bit(nr, addr) \
-	__test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-#define __test_and_clear_le_bit(nr, addr) \
-	__test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
-
-#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0)
-unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
-				    unsigned long size, unsigned long offset);
-
-unsigned long generic_find_next_le_bit(const unsigned long *addr,
-				    unsigned long size, unsigned long offset);
-/* Bitmap functions for the ext2 filesystem */
-
-#define ext2_set_bit(nr,addr) \
-	__test_and_set_le_bit((nr), (unsigned long*)addr)
-#define ext2_clear_bit(nr, addr) \
-	__test_and_clear_le_bit((nr), (unsigned long*)addr)
-
-#define ext2_set_bit_atomic(lock, nr, addr) \
-	test_and_set_le_bit((nr), (unsigned long*)addr)
-#define ext2_clear_bit_atomic(lock, nr, addr) \
-	test_and_clear_le_bit((nr), (unsigned long*)addr)
-
-#define ext2_test_bit(nr, addr)      test_le_bit((nr),(unsigned long*)addr)
-
-#define ext2_find_first_zero_bit(addr, size) \
-	find_first_zero_le_bit((unsigned long*)addr, size)
-#define ext2_find_next_zero_bit(addr, size, off) \
-	generic_find_next_zero_le_bit((unsigned long*)addr, size, off)
-
-#define ext2_find_next_bit(addr, size, off) \
-	generic_find_next_le_bit((unsigned long *)addr, size, off)
-/* Bitmap functions for the minix filesystem.  */
-
-#define minix_test_and_set_bit(nr,addr) \
-	__test_and_set_le_bit(nr, (unsigned long *)addr)
-#define minix_set_bit(nr,addr) \
-	__set_le_bit(nr, (unsigned long *)addr)
-#define minix_test_and_clear_bit(nr,addr) \
-	__test_and_clear_le_bit(nr, (unsigned long *)addr)
-#define minix_test_bit(nr,addr) \
-	test_le_bit(nr, (unsigned long *)addr)
-
-#define minix_find_first_zero_bit(addr,size) \
-	find_first_zero_le_bit((unsigned long *)addr, size)
-
-#include <asm-generic/bitops/sched.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_BITOPS_H */
diff --git a/include/asm-powerpc/bootx.h b/include/asm-powerpc/bootx.h
deleted file mode 100644
index 57b82e3f89ce..000000000000
--- a/include/asm-powerpc/bootx.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * This file describes the structure passed from the BootX application
- * (for MacOS) when it is used to boot Linux.
- *
- * Written by Benjamin Herrenschmidt.
- */
-
-
-#ifndef __ASM_BOOTX_H__
-#define __ASM_BOOTX_H__
-
-#include <asm/types.h>
-
-#ifdef macintosh
-#include <Types.h>
-#include "linux_type_defs.h"
-#endif
-
-#ifdef macintosh
-/* All this requires PowerPC alignment */
-#pragma options align=power
-#endif
-
-/* On kernel entry:
- *
- * r3 = 0x426f6f58    ('BooX')
- * r4 = pointer to boot_infos
- * r5 = NULL
- *
- * Data and instruction translation disabled, interrupts
- * disabled, kernel loaded at physical 0x00000000 on PCI
- * machines (will be different on NuBus).
- */
-
-#define BOOT_INFO_VERSION               5
-#define BOOT_INFO_COMPATIBLE_VERSION    1
-
-/* Bit in the architecture flag mask. More to be defined in
-   future versions. Note that either BOOT_ARCH_PCI or
-   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
-   set additionally when BOOT_ARCH_NUBUS is set.
- */
-#define BOOT_ARCH_PCI                   0x00000001UL
-#define BOOT_ARCH_NUBUS                 0x00000002UL
-#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
-#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
-#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
-
-/*  Maximum number of ranges in phys memory map */
-#define MAX_MEM_MAP_SIZE				26
-
-/* This is the format of an element in the physical memory map. Note that
-   the map is optional and current BootX will only build it for pre-PCI
-   machines */
-typedef struct boot_info_map_entry
-{
-    __u32       physAddr;                /* Physical starting address */
-    __u32       size;                    /* Size in bytes */
-} boot_info_map_entry_t;
-
-
-/* Here are the boot informations that are passed to the bootstrap
- * Note that the kernel arguments and the device tree are appended
- * at the end of this structure. */
-typedef struct boot_infos
-{
-    /* Version of this structure */
-    __u32       version;
-    /* backward compatible down to version: */
-    __u32       compatible_version;
-
-    /* NEW (vers. 2) this holds the current _logical_ base addr of
-       the frame buffer (for use by early boot message) */
-    __u8*       logicalDisplayBase;
-
-    /* NEW (vers. 4) Apple's machine identification */
-    __u32       machineID;
-
-    /* NEW (vers. 4) Detected hw architecture */
-    __u32       architecture;
-
-    /* The device tree (internal addresses relative to the beginning of the tree,
-     * device tree offset relative to the beginning of this structure).
-     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
-     * field is 0.
-     */
-    __u32       deviceTreeOffset;        /* Device tree offset */
-    __u32       deviceTreeSize;          /* Size of the device tree */
-
-    /* Some infos about the current MacOS display */
-    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
-    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
-    __u8*       dispDeviceBase;          /* base address (physical) */
-    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
-    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
-    /* Optional offset in the registry to the current
-     * MacOS display. (Can be 0 when not detected) */
-     __u32      dispDeviceRegEntryOffset;
-
-    /* Optional pointer to boot ramdisk (offset from this structure) */
-    __u32       ramDisk;
-    __u32       ramDiskSize;             /* size of ramdisk image */
-
-    /* Kernel command line arguments (offset from this structure) */
-    __u32       kernelParamsOffset;
-
-    /* ALL BELOW NEW (vers. 4) */
-
-    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
-       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
-       device-tree. */
-    boot_info_map_entry_t
-    	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
-    __u32       physMemoryMapSize;               /* How many entries in map */
-
-
-    /* The framebuffer size (optional, currently 0) */
-    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
-
-    /* NEW (vers. 5) */
-
-    /* Total params size (args + colormap + device tree + ramdisk) */
-    __u32       totalParamsSize;
-
-} boot_infos_t;
-
-#ifdef __KERNEL__
-/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index
- * is represented by 3 short words containing a 16 bits (unsigned) color
- * component. Later versions may contain the gamma table for direct-color
- * devices here.
- */
-#define BOOTX_COLORTABLE_SIZE    (256UL*3UL*2UL)
-
-/* BootX passes the device-tree using a format that comes from earlier
- * ppc32 kernels. This used to match what is in prom.h, but not anymore
- * so we now define it here
- */
-struct bootx_dt_prop {
-	u32	name;
-	int	length;
-	u32	value;
-	u32	next;
-};
-
-struct bootx_dt_node {
-	u32	unused0;
-	u32	unused1;
-	u32	phandle;	/* not really available */
-	u32	unused2;
-	u32	unused3;
-	u32	unused4;
-	u32	unused5;
-	u32	full_name;
-	u32	properties;
-	u32	parent;
-	u32	child;
-	u32	sibling;
-	u32	next;
-	u32	allnext;
-};
-
-extern void bootx_init(unsigned long r4, unsigned long phys);
-
-#endif /* __KERNEL__ */
-
-#ifdef macintosh
-#pragma options align=reset
-#endif
-
-#endif
diff --git a/include/asm-powerpc/btext.h b/include/asm-powerpc/btext.h
deleted file mode 100644
index 906f46e31006..000000000000
--- a/include/asm-powerpc/btext.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Definitions for using the procedures in btext.c.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#ifndef __PPC_BTEXT_H
-#define __PPC_BTEXT_H
-#ifdef __KERNEL__
-
-extern int btext_find_display(int allow_nonstdout);
-extern void btext_update_display(unsigned long phys, int width, int height,
-				 int depth, int pitch);
-extern void btext_setup_display(int width, int height, int depth, int pitch,
-				unsigned long address);
-extern void btext_prepare_BAT(void);
-extern void btext_unmap(void);
-
-extern void btext_drawchar(char c);
-extern void btext_drawstring(const char *str);
-extern void btext_drawhex(unsigned long v);
-extern void btext_drawtext(const char *c, unsigned int len);
-
-extern void btext_clearscreen(void);
-extern void btext_flushscreen(void);
-extern void btext_flushline(void);
-
-#endif /* __KERNEL__ */
-#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h
deleted file mode 100644
index e55d1f66b86f..000000000000
--- a/include/asm-powerpc/bug.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef _ASM_POWERPC_BUG_H
-#define _ASM_POWERPC_BUG_H
-#ifdef __KERNEL__
-
-#include <asm/asm-compat.h>
-/*
- * Define an illegal instr to trap on the bug.
- * We don't use 0 because that marks the end of a function
- * in the ELF ABI.  That's "Boo Boo" in case you wonder...
- */
-#define BUG_OPCODE .long 0x00b00b00  /* For asm */
-#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */
-
-#ifdef CONFIG_BUG
-
-#ifdef __ASSEMBLY__
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-.macro EMIT_BUG_ENTRY addr,file,line,flags
-	 .section __bug_table,"a"
-5001:	 PPC_LONG \addr, 5002f
-	 .short \line, \flags
-	 .org 5001b+BUG_ENTRY_SIZE
-	 .previous
-	 .section .rodata,"a"
-5002:	 .asciz "\file"
-	 .previous
-.endm
-#else
- .macro EMIT_BUG_ENTRY addr,file,line,flags
-	 .section __bug_table,"a"
-5001:	 PPC_LONG \addr
-	 .short \flags
-	 .org 5001b+BUG_ENTRY_SIZE
-	 .previous
-.endm
-#endif /* verbose */
-
-#else /* !__ASSEMBLY__ */
-/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
-   sizeof(struct bug_entry), respectively */
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define _EMIT_BUG_ENTRY				\
-	".section __bug_table,\"a\"\n"		\
-	"2:\t" PPC_LONG "1b, %0\n"		\
-	"\t.short %1, %2\n"			\
-	".org 2b+%3\n"				\
-	".previous\n"
-#else
-#define _EMIT_BUG_ENTRY				\
-	".section __bug_table,\"a\"\n"		\
-	"2:\t" PPC_LONG "1b\n"			\
-	"\t.short %2\n"				\
-	".org 2b+%3\n"				\
-	".previous\n"
-#endif
-
-/*
- * BUG_ON() and WARN_ON() do their best to cooperate with compile-time
- * optimisations. However depending on the complexity of the condition
- * some compiler versions may not produce optimal results.
- */
-
-#define BUG() do {						\
-	__asm__ __volatile__(					\
-		"1:	twi 31,0,0\n"				\
-		_EMIT_BUG_ENTRY					\
-		: : "i" (__FILE__), "i" (__LINE__),		\
-		    "i" (0), "i"  (sizeof(struct bug_entry)));	\
-	for(;;) ;						\
-} while (0)
-
-#define BUG_ON(x) do {						\
-	if (__builtin_constant_p(x)) {				\
-		if (x)						\
-			BUG();					\
-	} else {						\
-		__asm__ __volatile__(				\
-		"1:	"PPC_TLNEI"	%4,0\n"			\
-		_EMIT_BUG_ENTRY					\
-		: : "i" (__FILE__), "i" (__LINE__), "i" (0),	\
-		  "i" (sizeof(struct bug_entry)),		\
-		  "r" ((__force long)(x)));			\
-	}							\
-} while (0)
-
-#define __WARN() do {						\
-	__asm__ __volatile__(					\
-		"1:	twi 31,0,0\n"				\
-		_EMIT_BUG_ENTRY					\
-		: : "i" (__FILE__), "i" (__LINE__),		\
-		  "i" (BUGFLAG_WARNING),			\
-		  "i" (sizeof(struct bug_entry)));		\
-} while (0)
-
-#define WARN_ON(x) ({						\
-	int __ret_warn_on = !!(x);				\
-	if (__builtin_constant_p(__ret_warn_on)) {		\
-		if (__ret_warn_on)				\
-			__WARN();				\
-	} else {						\
-		__asm__ __volatile__(				\
-		"1:	"PPC_TLNEI"	%4,0\n"			\
-		_EMIT_BUG_ENTRY					\
-		: : "i" (__FILE__), "i" (__LINE__),		\
-		  "i" (BUGFLAG_WARNING),			\
-		  "i" (sizeof(struct bug_entry)),		\
-		  "r" (__ret_warn_on));				\
-	}							\
-	unlikely(__ret_warn_on);				\
-})
-
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_BUG_ON
-#define HAVE_ARCH_WARN_ON
-#endif /* __ASSEMBLY __ */
-#endif /* CONFIG_BUG */
-
-#include <asm-generic/bug.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_BUG_H */
diff --git a/include/asm-powerpc/bugs.h b/include/asm-powerpc/bugs.h
deleted file mode 100644
index 42fdb73e3068..000000000000
--- a/include/asm-powerpc/bugs.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_POWERPC_BUGS_H
-#define _ASM_POWERPC_BUGS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * This file is included by 'init/main.c' to check for
- * architecture-dependent bugs.
- */
-
-static inline void check_bugs(void) { }
-
-#endif	/* _ASM_POWERPC_BUGS_H */
diff --git a/include/asm-powerpc/byteorder.h b/include/asm-powerpc/byteorder.h
deleted file mode 100644
index b37752214a16..000000000000
--- a/include/asm-powerpc/byteorder.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _ASM_POWERPC_BYTEORDER_H
-#define _ASM_POWERPC_BYTEORDER_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#ifdef __GNUC__
-#ifdef __KERNEL__
-
-static __inline__ __u16 ld_le16(const volatile __u16 *addr)
-{
-	__u16 val;
-
-	__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
-	return val;
-}
-
-static __inline__ void st_le16(volatile __u16 *addr, const __u16 val)
-{
-	__asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
-}
-
-static __inline__ __u32 ld_le32(const volatile __u32 *addr)
-{
-	__u32 val;
-
-	__asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
-	return val;
-}
-
-static __inline__ void st_le32(volatile __u32 *addr, const __u32 val)
-{
-	__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
-}
-
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
-{
-	__u16 result;
-
-	__asm__("rlwimi %0,%1,8,16,23"
-	    : "=r" (result)
-	    : "r" (value), "0" (value >> 8));
-	return result;
-}
-
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
-{
-	__u32 result;
-
-	__asm__("rlwimi %0,%1,24,16,23\n\t"
-	    "rlwimi %0,%1,8,8,15\n\t"
-	    "rlwimi %0,%1,24,0,7"
-	    : "=r" (result)
-	    : "r" (value), "0" (value >> 24));
-	return result;
-}
-
-#define __arch__swab16(x) ___arch__swab16(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-
-/* The same, but returns converted value from the location pointer by addr. */
-#define __arch__swab16p(addr) ld_le16(addr)
-#define __arch__swab32p(addr) ld_le32(addr)
-
-/* The same, but do the conversion in situ, ie. put the value back to addr. */
-#define __arch__swab16s(addr) st_le16(addr,*addr)
-#define __arch__swab32s(addr) st_le32(addr,*addr)
-
-#endif /* __KERNEL__ */
-
-#ifndef __STRICT_ANSI__
-#define __BYTEORDER_HAS_U64__
-#ifndef __powerpc64__
-#define __SWAB_64_THRU_32__
-#endif /* __powerpc64__ */
-#endif /* __STRICT_ANSI__ */
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h
deleted file mode 100644
index 81de6eb3455d..000000000000
--- a/include/asm-powerpc/cache.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef _ASM_POWERPC_CACHE_H
-#define _ASM_POWERPC_CACHE_H
-
-#ifdef __KERNEL__
-
-
-/* bytes per L1 cache line */
-#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
-#define L1_CACHE_SHIFT		4
-#define MAX_COPY_PREFETCH	1
-#elif defined(CONFIG_PPC_E500MC)
-#define L1_CACHE_SHIFT		6
-#define MAX_COPY_PREFETCH	4
-#elif defined(CONFIG_PPC32)
-#define L1_CACHE_SHIFT		5
-#define MAX_COPY_PREFETCH	4
-#else /* CONFIG_PPC64 */
-#define L1_CACHE_SHIFT		7
-#endif
-
-#define	L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-#define	SMP_CACHE_BYTES		L1_CACHE_BYTES
-
-#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
-struct ppc64_caches {
-	u32	dsize;			/* L1 d-cache size */
-	u32	dline_size;		/* L1 d-cache line size	*/
-	u32	log_dline_size;
-	u32	dlines_per_page;
-	u32	isize;			/* L1 i-cache size */
-	u32	iline_size;		/* L1 i-cache line size	*/
-	u32	log_iline_size;
-	u32	ilines_per_page;
-};
-
-extern struct ppc64_caches ppc64_caches;
-#endif /* __powerpc64__ && ! __ASSEMBLY__ */
-
-#if !defined(__ASSEMBLY__)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/include/asm-powerpc/cacheflush.h b/include/asm-powerpc/cacheflush.h
deleted file mode 100644
index ba667a383b8c..000000000000
--- a/include/asm-powerpc/cacheflush.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_CACHEFLUSH_H
-#define _ASM_POWERPC_CACHEFLUSH_H
-
-#ifdef __KERNEL__
-
-#include <linux/mm.h>
-#include <asm/cputable.h>
-
-/*
- * No cache flushing is required when address mappings are changed,
- * because the caches on PowerPCs are physically addressed.
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_icache_page(vma, page)		do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-extern void flush_dcache_page(struct page *page);
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-extern void __flush_icache_range(unsigned long, unsigned long);
-static inline void flush_icache_range(unsigned long start, unsigned long stop)
-{
-	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-		__flush_icache_range(start, stop);
-}
-
-extern void flush_icache_user_range(struct vm_area_struct *vma,
-				    struct page *page, unsigned long addr,
-				    int len);
-extern void __flush_dcache_icache(void *page_va);
-extern void flush_dcache_icache_page(struct page *page);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
-extern void __flush_dcache_icache_phys(unsigned long physaddr);
-#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
-
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
-#ifdef CONFIG_PPC32
-extern void clean_dcache_range(unsigned long start, unsigned long stop);
-extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
-#endif /* CONFIG_PPC32 */
-#ifdef CONFIG_PPC64
-extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
-extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
-#endif
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	do { \
-		memcpy(dst, src, len); \
-		flush_icache_user_range(vma, page, vaddr, len); \
-	} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-/* internal debugging function */
-void kernel_map_pages(struct page *page, int numpages, int enable);
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_CACHEFLUSH_H */
diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h
deleted file mode 100644
index 8066eede3a0c..000000000000
--- a/include/asm-powerpc/cell-pmu.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Cell Broadband Engine Performance Monitor
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author:
- *   David Erb (djerb@us.ibm.com)
- *   Kevin Corry (kevcorry@us.ibm.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_CELL_PMU_H__
-#define __ASM_CELL_PMU_H__
-
-/* The Cell PMU has four hardware performance counters, which can be
- * configured as four 32-bit counters or eight 16-bit counters.
- */
-#define NR_PHYS_CTRS 4
-#define NR_CTRS      (NR_PHYS_CTRS * 2)
-
-/* Macros for the pm_control register. */
-#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
-#define CBE_PM_ENABLE_PERF_MON             0x80000000
-#define CBE_PM_STOP_AT_MAX                 0x40000000
-#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
-#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
-#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
-#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
-#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
-
-/* Macros for the trace_address register. */
-#define CBE_PM_TRACE_BUF_FULL              0x00000800
-#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
-#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
-#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
-
-/* Macros for the pm07_control registers. */
-#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
-#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
-#define CBE_PM_CTR_POLARITY                0x01000000
-#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
-#define CBE_PM_CTR_ENABLE                  0x00400000
-#define PM07_CTR_INPUT_MUX(x)              (((x) & 0x3F) << 26)
-#define PM07_CTR_INPUT_CONTROL(x)          (((x) & 1) << 25)
-#define PM07_CTR_POLARITY(x)               (((x) & 1) << 24)
-#define PM07_CTR_COUNT_CYCLES(x)           (((x) & 1) << 23)
-#define PM07_CTR_ENABLE(x)                 (((x) & 1) << 22)
-
-/* Macros for the pm_status register. */
-#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
-
-enum pm_reg_name {
-	group_control,
-	debug_bus_control,
-	trace_address,
-	ext_tr_timer,
-	pm_status,
-	pm_control,
-	pm_interval,
-	pm_start_stop,
-};
-
-/* Routines for reading/writing the PMU registers. */
-extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
-extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
-extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
-extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
-
-extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
-extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
-extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
-extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
-
-extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
-extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
-
-extern void cbe_enable_pm(u32 cpu);
-extern void cbe_disable_pm(u32 cpu);
-
-extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
-
-extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
-extern void cbe_disable_pm_interrupts(u32 cpu);
-extern u32  cbe_get_and_clear_pm_interrupts(u32 cpu);
-extern void cbe_sync_irq(int node);
-
-#define CBE_COUNT_SUPERVISOR_MODE       0
-#define CBE_COUNT_HYPERVISOR_MODE       1
-#define CBE_COUNT_PROBLEM_MODE          2
-#define CBE_COUNT_ALL_MODES             3
-
-#endif /* __ASM_CELL_PMU_H__ */
diff --git a/include/asm-powerpc/cell-regs.h b/include/asm-powerpc/cell-regs.h
deleted file mode 100644
index fd6fd00434ef..000000000000
--- a/include/asm-powerpc/cell-regs.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cbe_regs.h
- *
- * This file is intended to hold the various register definitions for CBE
- * on-chip system devices (memory controller, IO controller, etc...)
- *
- * (C) Copyright IBM Corporation 2001,2006
- *
- * Authors: Maximino Aguilar (maguilar@us.ibm.com)
- *          David J. Erb (djerb@us.ibm.com)
- *
- * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
- */
-
-#ifndef CBE_REGS_H
-#define CBE_REGS_H
-
-#include <asm/cell-pmu.h>
-
-/*
- *
- * Some HID register definitions
- *
- */
-
-/* CBE specific HID0 bits */
-#define HID0_CBE_THERM_WAKEUP	0x0000020000000000ul
-#define HID0_CBE_SYSERR_WAKEUP	0x0000008000000000ul
-#define HID0_CBE_THERM_INT_EN	0x0000000400000000ul
-#define HID0_CBE_SYSERR_INT_EN	0x0000000200000000ul
-
-#define MAX_CBE		2
-
-/*
- *
- * Pervasive unit register definitions
- *
- */
-
-union spe_reg {
-	u64 val;
-	u8 spe[8];
-};
-
-union ppe_spe_reg {
-	u64 val;
-	struct {
-		u32 ppe;
-		u32 spe;
-	};
-};
-
-
-struct cbe_pmd_regs {
-	/* Debug Bus Control */
-	u64	pad_0x0000;					/* 0x0000 */
-
-	u64	group_control;					/* 0x0008 */
-
-	u8	pad_0x0010_0x00a8 [0x00a8 - 0x0010];		/* 0x0010 */
-
-	u64	debug_bus_control;				/* 0x00a8 */
-
-	u8	pad_0x00b0_0x0100 [0x0100 - 0x00b0];		/* 0x00b0 */
-
-	u64	trace_aux_data;					/* 0x0100 */
-	u64	trace_buffer_0_63;				/* 0x0108 */
-	u64	trace_buffer_64_127;				/* 0x0110 */
-	u64	trace_address;					/* 0x0118 */
-	u64	ext_tr_timer;					/* 0x0120 */
-
-	u8	pad_0x0128_0x0400 [0x0400 - 0x0128];		/* 0x0128 */
-
-	/* Performance Monitor */
-	u64	pm_status;					/* 0x0400 */
-	u64	pm_control;					/* 0x0408 */
-	u64	pm_interval;					/* 0x0410 */
-	u64	pm_ctr[4];					/* 0x0418 */
-	u64	pm_start_stop;					/* 0x0438 */
-	u64	pm07_control[8];				/* 0x0440 */
-
-	u8	pad_0x0480_0x0800 [0x0800 - 0x0480];		/* 0x0480 */
-
-	/* Thermal Sensor Registers */
-	union	spe_reg	ts_ctsr1;				/* 0x0800 */
-	u64	ts_ctsr2;					/* 0x0808 */
-	union	spe_reg	ts_mtsr1;				/* 0x0810 */
-	u64	ts_mtsr2;					/* 0x0818 */
-	union	spe_reg	ts_itr1;				/* 0x0820 */
-	u64	ts_itr2;					/* 0x0828 */
-	u64	ts_gitr;					/* 0x0830 */
-	u64	ts_isr;						/* 0x0838 */
-	u64	ts_imr;						/* 0x0840 */
-	union	spe_reg	tm_cr1;					/* 0x0848 */
-	u64	tm_cr2;						/* 0x0850 */
-	u64	tm_simr;					/* 0x0858 */
-	union	ppe_spe_reg tm_tpr;				/* 0x0860 */
-	union	spe_reg	tm_str1;				/* 0x0868 */
-	u64	tm_str2;					/* 0x0870 */
-	union	ppe_spe_reg tm_tsr;				/* 0x0878 */
-
-	/* Power Management */
-	u64	pmcr;						/* 0x0880 */
-#define CBE_PMD_PAUSE_ZERO_CONTROL	0x10000
-	u64	pmsr;						/* 0x0888 */
-
-	/* Time Base Register */
-	u64	tbr;						/* 0x0890 */
-
-	u8	pad_0x0898_0x0c00 [0x0c00 - 0x0898];		/* 0x0898 */
-
-	/* Fault Isolation Registers */
-	u64	checkstop_fir;					/* 0x0c00 */
-	u64	recoverable_fir;				/* 0x0c08 */
-	u64	spec_att_mchk_fir;				/* 0x0c10 */
-	u32	fir_mode_reg;					/* 0x0c18 */
-	u8	pad_0x0c1c_0x0c20 [4];				/* 0x0c1c */
-#define CBE_PMD_FIR_MODE_M8		0x00800
-	u64	fir_enable_mask;				/* 0x0c20 */
-
-	u8	pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];		/* 0x0c28 */
-	u64	ras_esc_0;					/* 0x0ca8 */
-	u8	pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];		/* 0x0cb0 */
-};
-
-extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
-extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
-
-/*
- * PMU shadow registers
- *
- * Many of the registers in the performance monitoring unit are write-only,
- * so we need to save a copy of what we write to those registers.
- *
- * The actual data counters are read/write. However, writing to the counters
- * only takes effect if the PMU is enabled. Otherwise the value is stored in
- * a hardware latch until the next time the PMU is enabled. So we save a copy
- * of the counter values if we need to read them back while the PMU is
- * disabled. The counter_value_in_latch field is a bitmap indicating which
- * counters currently have a value waiting to be written.
- */
-
-struct cbe_pmd_shadow_regs {
-	u32 group_control;
-	u32 debug_bus_control;
-	u32 trace_address;
-	u32 ext_tr_timer;
-	u32 pm_status;
-	u32 pm_control;
-	u32 pm_interval;
-	u32 pm_start_stop;
-	u32 pm07_control[NR_CTRS];
-
-	u32 pm_ctr[NR_PHYS_CTRS];
-	u32 counter_value_in_latch;
-};
-
-extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
-extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
-
-/*
- *
- * IIC unit register definitions
- *
- */
-
-struct cbe_iic_pending_bits {
-	u32 data;
-	u8 flags;
-	u8 class;
-	u8 source;
-	u8 prio;
-};
-
-#define CBE_IIC_IRQ_VALID	0x80
-#define CBE_IIC_IRQ_IPI		0x40
-
-struct cbe_iic_thread_regs {
-	struct cbe_iic_pending_bits pending;
-	struct cbe_iic_pending_bits pending_destr;
-	u64 generate;
-	u64 prio;
-};
-
-struct cbe_iic_regs {
-	u8	pad_0x0000_0x0400[0x0400 - 0x0000];		/* 0x0000 */
-
-	/* IIC interrupt registers */
-	struct	cbe_iic_thread_regs thread[2];			/* 0x0400 */
-
-	u64	iic_ir;						/* 0x0440 */
-#define CBE_IIC_IR_PRIO(x)      (((x) & 0xf) << 12)
-#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
-#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
-#define CBE_IIC_IR_IOC_0        0x0
-#define CBE_IIC_IR_IOC_1S       0xb
-#define CBE_IIC_IR_PT_0         0xe
-#define CBE_IIC_IR_PT_1         0xf
-
-	u64	iic_is;						/* 0x0448 */
-#define CBE_IIC_IS_PMI		0x2
-
-	u8	pad_0x0450_0x0500[0x0500 - 0x0450];		/* 0x0450 */
-
-	/* IOC FIR */
-	u64	ioc_fir_reset;					/* 0x0500 */
-	u64	ioc_fir_set;					/* 0x0508 */
-	u64	ioc_checkstop_enable;				/* 0x0510 */
-	u64	ioc_fir_error_mask;				/* 0x0518 */
-	u64	ioc_syserr_enable;				/* 0x0520 */
-	u64	ioc_fir;					/* 0x0528 */
-
-	u8	pad_0x0530_0x1000[0x1000 - 0x0530];		/* 0x0530 */
-};
-
-extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
-extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
-
-
-struct cbe_mic_tm_regs {
-	u8	pad_0x0000_0x0040[0x0040 - 0x0000];		/* 0x0000 */
-
-	u64	mic_ctl_cnfg2;					/* 0x0040 */
-#define CBE_MIC_ENABLE_AUX_TRC		0x8000000000000000LL
-#define CBE_MIC_DISABLE_PWR_SAV_2	0x0200000000000000LL
-#define CBE_MIC_DISABLE_AUX_TRC_WRAP	0x0100000000000000LL
-#define CBE_MIC_ENABLE_AUX_TRC_INT	0x0080000000000000LL
-
-	u64	pad_0x0048;					/* 0x0048 */
-
-	u64	mic_aux_trc_base;				/* 0x0050 */
-	u64	mic_aux_trc_max_addr;				/* 0x0058 */
-	u64	mic_aux_trc_cur_addr;				/* 0x0060 */
-	u64	mic_aux_trc_grf_addr;				/* 0x0068 */
-	u64	mic_aux_trc_grf_data;				/* 0x0070 */
-
-	u64	pad_0x0078;					/* 0x0078 */
-
-	u64	mic_ctl_cnfg_0;					/* 0x0080 */
-#define CBE_MIC_DISABLE_PWR_SAV_0	0x8000000000000000LL
-
-	u64	pad_0x0088;					/* 0x0088 */
-
-	u64	slow_fast_timer_0;				/* 0x0090 */
-	u64	slow_next_timer_0;				/* 0x0098 */
-
-	u8	pad_0x00a0_0x00f8[0x00f8 - 0x00a0];		/* 0x00a0 */
-	u64    	mic_df_ecc_address_0;				/* 0x00f8 */
-
-	u8	pad_0x0100_0x01b8[0x01b8 - 0x0100];		/* 0x0100 */
-	u64    	mic_df_ecc_address_1;				/* 0x01b8 */
-
-	u64	mic_ctl_cnfg_1;					/* 0x01c0 */
-#define CBE_MIC_DISABLE_PWR_SAV_1	0x8000000000000000LL
-
-	u64	pad_0x01c8;					/* 0x01c8 */
-
-	u64	slow_fast_timer_1;				/* 0x01d0 */
-	u64	slow_next_timer_1;				/* 0x01d8 */
-
-	u8	pad_0x01e0_0x0208[0x0208 - 0x01e0];		/* 0x01e0 */
-	u64	mic_exc;					/* 0x0208 */
-#define CBE_MIC_EXC_BLOCK_SCRUB		0x0800000000000000ULL
-#define CBE_MIC_EXC_FAST_SCRUB		0x0100000000000000ULL
-
-	u64	mic_mnt_cfg;					/* 0x0210 */
-#define CBE_MIC_MNT_CFG_CHAN_0_POP	0x0002000000000000ULL
-#define CBE_MIC_MNT_CFG_CHAN_1_POP	0x0004000000000000ULL
-
-	u64	mic_df_config;					/* 0x0218 */
-#define CBE_MIC_ECC_DISABLE_0		0x4000000000000000ULL
-#define CBE_MIC_ECC_REP_SINGLE_0	0x2000000000000000ULL
-#define CBE_MIC_ECC_DISABLE_1		0x0080000000000000ULL
-#define CBE_MIC_ECC_REP_SINGLE_1	0x0040000000000000ULL
-
-	u8	pad_0x0220_0x0230[0x0230 - 0x0220];		/* 0x0220 */
-	u64	mic_fir;					/* 0x0230 */
-#define CBE_MIC_FIR_ECC_SINGLE_0_ERR	0x0200000000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_ERR	0x0100000000000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_ERR	0x0080000000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_ERR	0x0040000000000000ULL
-#define CBE_MIC_FIR_ECC_ERR_MASK	0xffff000000000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_0_CTE	0x0000020000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_CTE	0x0000010000000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_CTE	0x0000008000000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_CTE	0x0000004000000000ULL
-#define CBE_MIC_FIR_ECC_CTE_MASK	0x0000ffff00000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_0_RESET	0x0000000002000000ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_RESET	0x0000000001000000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_RESET	0x0000000000800000ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_RESET	0x0000000000400000ULL
-#define CBE_MIC_FIR_ECC_RESET_MASK	0x00000000ffff0000ULL
-#define CBE_MIC_FIR_ECC_SINGLE_0_SET	0x0000000000000200ULL
-#define CBE_MIC_FIR_ECC_MULTI_0_SET	0x0000000000000100ULL
-#define CBE_MIC_FIR_ECC_SINGLE_1_SET	0x0000000000000080ULL
-#define CBE_MIC_FIR_ECC_MULTI_1_SET	0x0000000000000040ULL
-#define CBE_MIC_FIR_ECC_SET_MASK	0x000000000000ffffULL
-	u64	mic_fir_debug;					/* 0x0238 */
-
-	u8	pad_0x0240_0x1000[0x1000 - 0x0240];		/* 0x0240 */
-};
-
-extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
-extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
-
-/* some utility functions to deal with SMT */
-extern u32 cbe_get_hw_thread_id(int cpu);
-extern u32 cbe_cpu_to_node(int cpu);
-extern u32 cbe_node_to_cpu(int node);
-
-/* Init this module early */
-extern void cbe_regs_init(void);
-
-
-#endif /* CBE_REGS_H */
diff --git a/include/asm-powerpc/checksum.h b/include/asm-powerpc/checksum.h
deleted file mode 100644
index 7cdf358337cf..000000000000
--- a/include/asm-powerpc/checksum.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_CHECKSUM_H
-#define _ASM_POWERPC_CHECKSUM_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.  ihl is the number
- * of 32-bit words and is always >= 5.
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * Computes the checksum of a memory block at src, length len,
- * and adds in "sum" (32-bit), while copying the block to dst.
- * If an access exception occurs on src or dst, it stores -EFAULT
- * to *src_err or *dst_err respectively (if that pointer is not
- * NULL), and, for an error on src, zeroes the rest of dst.
- *
- * Like csum_partial, this must be called with even lengths,
- * except for the last fragment.
- */
-extern __wsum csum_partial_copy_generic(const void *src, void *dst,
-					      int len, __wsum sum,
-					      int *src_err, int *dst_err);
-/*
- * the same as csum_partial, but copies from src to dst while it
- * checksums.
- */
-#define csum_partial_copy_from_user(src, dst, len, sum, errp)   \
-        csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL)
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)   \
-        csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
-
-
-/*
- * turns a 32-bit partial checksum (e.g. from csum_partial) into a
- * 1's complement 16-bit checksum.
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp;
-
-	/* swap the two 16-bit halves of sum */
-	__asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
-	/* if there is a carry from adding the two 16-bit halves,
-	   it will carry from the lower half into the upper half,
-	   giving us the correct sum in the upper half. */
-	return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-                                     unsigned short len,
-                                     unsigned short proto,
-                                     __wsum sum)
-{
-#ifdef __powerpc64__
-	unsigned long s = (__force u32)sum;
-
-	s += (__force u32)saddr;
-	s += (__force u32)daddr;
-	s += proto + len;
-	s += (s >> 32);
-	return (__force __wsum) s;
-#else
-    __asm__("\n\
-	addc %0,%0,%1 \n\
-	adde %0,%0,%2 \n\
-	adde %0,%0,%3 \n\
-	addze %0,%0 \n\
-	"
-	: "=r" (sum)
-	: "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum));
-	return sum;
-#endif
-}
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/clk_interface.h b/include/asm-powerpc/clk_interface.h
deleted file mode 100644
index ab1882c1e176..000000000000
--- a/include/asm-powerpc/clk_interface.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_POWERPC_CLK_INTERFACE_H
-#define __ASM_POWERPC_CLK_INTERFACE_H
-
-#include <linux/clk.h>
-
-struct clk_interface {
-	struct clk*	(*clk_get)	(struct device *dev, const char *id);
-	int		(*clk_enable)	(struct clk *clk);
-	void		(*clk_disable)	(struct clk *clk);
-	unsigned long	(*clk_get_rate)	(struct clk *clk);
-	void		(*clk_put)	(struct clk *clk);
-	long		(*clk_round_rate) (struct clk *clk, unsigned long rate);
-	int 		(*clk_set_rate)	(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent) (struct clk *clk, struct clk *parent);
-	struct clk*	(*clk_get_parent) (struct clk *clk);
-};
-
-extern struct clk_interface clk_functions;
-
-#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h
deleted file mode 100644
index 107d9b915e33..000000000000
--- a/include/asm-powerpc/code-patching.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _ASM_POWERPC_CODE_PATCHING_H
-#define _ASM_POWERPC_CODE_PATCHING_H
-
-/*
- * Copyright 2008, Michael Ellerman, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/types.h>
-
-#define PPC_NOP_INSTR		0x60000000
-#define PPC_LWSYNC_INSTR	0x7c2004ac
-
-/* Flags for create_branch:
- * "b"   == create_branch(addr, target, 0);
- * "ba"  == create_branch(addr, target, BRANCH_ABSOLUTE);
- * "bl"  == create_branch(addr, target, BRANCH_SET_LINK);
- * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK);
- */
-#define BRANCH_SET_LINK	0x1
-#define BRANCH_ABSOLUTE	0x2
-
-unsigned int create_branch(const unsigned int *addr,
-			   unsigned long target, int flags);
-unsigned int create_cond_branch(const unsigned int *addr,
-				unsigned long target, int flags);
-void patch_branch(unsigned int *addr, unsigned long target, int flags);
-void patch_instruction(unsigned int *addr, unsigned int instr);
-
-int instr_is_relative_branch(unsigned int instr);
-int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
-unsigned long branch_target(const unsigned int *instr);
-unsigned int translate_branch(const unsigned int *dest,
-			      const unsigned int *src);
-
-static inline unsigned long ppc_function_entry(void *func)
-{
-#ifdef CONFIG_PPC64
-	/*
-	 * On PPC64 the function pointer actually points to the function's
-	 * descriptor. The first entry in the descriptor is the address
-	 * of the function text.
-	 */
-	return ((func_descr_t *)func)->entry;
-#else
-	return (unsigned long)func;
-#endif
-}
-
-#endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h
deleted file mode 100644
index d811a8cd7b58..000000000000
--- a/include/asm-powerpc/compat.h
+++ /dev/null
@@ -1,214 +0,0 @@
-#ifndef _ASM_POWERPC_COMPAT_H
-#define _ASM_POWERPC_COMPAT_H
-#ifdef __KERNEL__
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-#include <linux/sched.h>
-
-#define COMPAT_USER_HZ	100
-
-typedef u32		compat_size_t;
-typedef s32		compat_ssize_t;
-typedef s32		compat_time_t;
-typedef s32		compat_clock_t;
-typedef s32		compat_pid_t;
-typedef u32		__compat_uid_t;
-typedef u32		__compat_gid_t;
-typedef u32		__compat_uid32_t;
-typedef u32		__compat_gid32_t;
-typedef u32		compat_mode_t;
-typedef u32		compat_ino_t;
-typedef u32		compat_dev_t;
-typedef s32		compat_off_t;
-typedef s64		compat_loff_t;
-typedef s16		compat_nlink_t;
-typedef u16		compat_ipc_pid_t;
-typedef s32		compat_daddr_t;
-typedef u32		compat_caddr_t;
-typedef __kernel_fsid_t	compat_fsid_t;
-typedef s32		compat_key_t;
-typedef s32		compat_timer_t;
-
-typedef s32		compat_int_t;
-typedef s32		compat_long_t;
-typedef s64		compat_s64;
-typedef u32		compat_uint_t;
-typedef u32		compat_ulong_t;
-typedef u64		compat_u64;
-
-struct compat_timespec {
-	compat_time_t	tv_sec;
-	s32		tv_nsec;
-};
-
-struct compat_timeval {
-	compat_time_t	tv_sec;
-	s32		tv_usec;
-};
-
-struct compat_stat {
-	compat_dev_t	st_dev;
-	compat_ino_t	st_ino;
-	compat_mode_t	st_mode;
-	compat_nlink_t	st_nlink;
-	__compat_uid32_t	st_uid;
-	__compat_gid32_t	st_gid;
-	compat_dev_t	st_rdev;
-	compat_off_t	st_size;
-	compat_off_t	st_blksize;
-	compat_off_t	st_blocks;
-	compat_time_t	st_atime;
-	u32		st_atime_nsec;
-	compat_time_t	st_mtime;
-	u32		st_mtime_nsec;
-	compat_time_t	st_ctime;
-	u32		st_ctime_nsec;
-	u32		__unused4[2];
-};
-
-struct compat_flock {
-	short		l_type;
-	short		l_whence;
-	compat_off_t	l_start;
-	compat_off_t	l_len;
-	compat_pid_t	l_pid;
-};
-
-#define F_GETLK64	12	/*  using 'struct flock64' */
-#define F_SETLK64	13
-#define F_SETLKW64	14
-
-struct compat_flock64 {
-	short		l_type;
-	short		l_whence;
-	compat_loff_t	l_start;
-	compat_loff_t	l_len;
-	compat_pid_t	l_pid;
-};
-
-struct compat_statfs {
-	int		f_type;
-	int		f_bsize;
-	int		f_blocks;
-	int		f_bfree;
-	int		f_bavail;
-	int		f_files;
-	int		f_ffree;
-	compat_fsid_t	f_fsid;
-	int		f_namelen;	/* SunOS ignores this field. */
-	int		f_frsize;
-	int		f_spare[5];
-};
-
-#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
-#define COMPAT_RLIM_INFINITY		0xffffffff
-
-typedef u32		compat_old_sigset_t;
-
-#define _COMPAT_NSIG		64
-#define _COMPAT_NSIG_BPW	32
-
-typedef u32		compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX	0x7fffffff
-#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
-
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-typedef	u32		compat_uptr_t;
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
-static inline void __user *compat_alloc_user_space(long len)
-{
-	struct pt_regs *regs = current->thread.regs;
-	unsigned long usp = regs->gpr[1];
-
-	/*
-	 * We cant access below the stack pointer in the 32bit ABI and
-	 * can access 288 bytes in the 64bit ABI
-	 */
-	if (!(test_thread_flag(TIF_32BIT)))
-		usp -= 288;
-
-	return (void __user *) (usp - len);
-}
-
-/*
- * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
- * it we may as well define it.
- */
-struct compat_ipc64_perm {
-	compat_key_t key;
-	__compat_uid_t uid;
-	__compat_gid_t gid;
-	__compat_uid_t cuid;
-	__compat_gid_t cgid;
-	compat_mode_t mode;
-	unsigned int seq;
-	unsigned int __pad2;
-	unsigned long __unused1;	/* yes they really are 64bit pads */
-	unsigned long __unused2;
-};
-
-struct compat_semid64_ds {
-	struct compat_ipc64_perm sem_perm;
-	unsigned int __unused1;
-	compat_time_t sem_otime;
-	unsigned int __unused2;
-	compat_time_t sem_ctime;
-	compat_ulong_t sem_nsems;
-	compat_ulong_t __unused3;
-	compat_ulong_t __unused4;
-};
-
-struct compat_msqid64_ds {
-	struct compat_ipc64_perm msg_perm;
-	unsigned int __unused1;
-	compat_time_t msg_stime;
-	unsigned int __unused2;
-	compat_time_t msg_rtime;
-	unsigned int __unused3;
-	compat_time_t msg_ctime;
-	compat_ulong_t msg_cbytes;
-	compat_ulong_t msg_qnum;
-	compat_ulong_t msg_qbytes;
-	compat_pid_t msg_lspid;
-	compat_pid_t msg_lrpid;
-	compat_ulong_t __unused4;
-	compat_ulong_t __unused5;
-};
-
-struct compat_shmid64_ds {
-	struct compat_ipc64_perm shm_perm;
-	unsigned int __unused1;
-	compat_time_t shm_atime;
-	unsigned int __unused2;
-	compat_time_t shm_dtime;
-	unsigned int __unused3;
-	compat_time_t shm_ctime;
-	unsigned int __unused4;
-	compat_size_t shm_segsz;
-	compat_pid_t shm_cpid;
-	compat_pid_t shm_lpid;
-	compat_ulong_t shm_nattch;
-	compat_ulong_t __unused5;
-	compat_ulong_t __unused6;
-};
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_COMPAT_H */
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
deleted file mode 100644
index 63a55337c2de..000000000000
--- a/include/asm-powerpc/cpm.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef __CPM_H
-#define __CPM_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Opcodes common to CPM1 and CPM2
-*/
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_SET_TIMER	((ushort)0x0008)
-#define CPM_CR_STOP_IDMA	((ushort)0x000b)
-
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-	ushort	cbd_sc;		/* Status and Control */
-	ushort	cbd_datlen;	/* Data length in buffer */
-	uint	cbd_bufaddr;	/* Buffer address in host memory */
-} cbd_t;
-
-/* Buffer descriptor control/status used by serial
- */
-
-#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
-#define BD_SC_READY	(0x8000)	/* Transmit is ready */
-#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
-#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
-#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
-#define BD_SC_TC	(0x0400)	/* Transmit CRC */
-#define BD_SC_CM	(0x0200)	/* Continous mode */
-#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
-#define BD_SC_P		(0x0100)	/* xmt preamble */
-#define BD_SC_BR	(0x0020)	/* Break received */
-#define BD_SC_FR	(0x0010)	/* Framing error */
-#define BD_SC_PR	(0x0008)	/* Parity error */
-#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
-#define BD_SC_OV	(0x0002)	/* Overrun */
-#define BD_SC_UN	(0x0002)	/* Underrun */
-#define BD_SC_CD	(0x0001)	/* */
-#define BD_SC_CL	(0x0001)	/* Collision */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY	(0x8000)
-#define BD_ENET_RX_WRAP		(0x2000)
-#define BD_ENET_RX_INTR		(0x1000)
-#define BD_ENET_RX_LAST		(0x0800)
-#define BD_ENET_RX_FIRST	(0x0400)
-#define BD_ENET_RX_MISS		(0x0100)
-#define BD_ENET_RX_BC		(0x0080)	/* FCC Only */
-#define BD_ENET_RX_MC		(0x0040)	/* FCC Only */
-#define BD_ENET_RX_LG		(0x0020)
-#define BD_ENET_RX_NO		(0x0010)
-#define BD_ENET_RX_SH		(0x0008)
-#define BD_ENET_RX_CR		(0x0004)
-#define BD_ENET_RX_OV		(0x0002)
-#define BD_ENET_RX_CL		(0x0001)
-#define BD_ENET_RX_STATS	(0x01ff)	/* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY	(0x8000)
-#define BD_ENET_TX_PAD		(0x4000)
-#define BD_ENET_TX_WRAP		(0x2000)
-#define BD_ENET_TX_INTR		(0x1000)
-#define BD_ENET_TX_LAST		(0x0800)
-#define BD_ENET_TX_TC		(0x0400)
-#define BD_ENET_TX_DEF		(0x0200)
-#define BD_ENET_TX_HB		(0x0100)
-#define BD_ENET_TX_LC		(0x0080)
-#define BD_ENET_TX_RL		(0x0040)
-#define BD_ENET_TX_RCMASK	(0x003c)
-#define BD_ENET_TX_UN		(0x0002)
-#define BD_ENET_TX_CSL		(0x0001)
-#define BD_ENET_TX_STATS	(0x03ff)	/* All status bits */
-
-/* Buffer descriptor control/status used by Transparent mode SCC.
- */
-#define BD_SCC_TX_LAST		(0x0800)
-
-/* Buffer descriptor control/status used by I2C.
- */
-#define BD_I2C_START		(0x0400)
-
-int cpm_muram_init(void);
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
-void __iomem *cpm_muram_addr(unsigned long offset);
-unsigned long cpm_muram_offset(void __iomem *addr);
-dma_addr_t cpm_muram_dma(void __iomem *addr);
-int cpm_command(u32 command, u8 opcode);
-
-#endif
diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h
deleted file mode 100644
index 2ff798744c1d..000000000000
--- a/include/asm-powerpc/cpm1.h
+++ /dev/null
@@ -1,652 +0,0 @@
-/*
- * MPC8xx Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This file contains structures and information for the communication
- * processor channels.  Some CPM control and status is available
- * throught the MPC8xx internal memory map.  See immap.h for details.
- * This file only contains what I need for the moment, not the total
- * CPM capabilities.  I (or someone else) will add definitions as they
- * are needed.  -- Dan
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM1__
-#define __CPM1__
-
-#include <asm/8xx_immap.h>
-#include <asm/ptrace.h>
-#include <asm/cpm.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST	((ushort)0x8000)
-#define CPM_CR_OPCODE	((ushort)0x0f00)
-#define CPM_CR_CHAN	((ushort)0x00f0)
-#define CPM_CR_FLG	((ushort)0x0001)
-
-/* Channel numbers.
-*/
-#define CPM_CR_CH_SCC1		((ushort)0x0000)
-#define CPM_CR_CH_I2C		((ushort)0x0001)	/* I2C and IDMA1 */
-#define CPM_CR_CH_SCC2		((ushort)0x0004)
-#define CPM_CR_CH_SPI		((ushort)0x0005)	/* SPI / IDMA2 / Timers */
-#define CPM_CR_CH_TIMER		CPM_CR_CH_SPI
-#define CPM_CR_CH_SCC3		((ushort)0x0008)
-#define CPM_CR_CH_SMC1		((ushort)0x0009)	/* SMC1 / DSP1 */
-#define CPM_CR_CH_SCC4		((ushort)0x000c)
-#define CPM_CR_CH_SMC2		((ushort)0x000d)	/* SMC2 / DSP2 */
-
-#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
-
-#define cpm_dpalloc cpm_muram_alloc
-#define cpm_dpfree cpm_muram_free
-#define cpm_dpram_addr cpm_muram_addr
-#define cpm_dpram_phys cpm_muram_dma
-
-extern void cpm_setbrg(uint brg, uint rate);
-
-extern void cpm_load_patch(cpm8xx_t *cp);
-
-extern void cpm_reset(void);
-
-/* Parameter RAM offsets.
-*/
-#define PROFF_SCC1	((uint)0x0000)
-#define PROFF_IIC	((uint)0x0080)
-#define PROFF_SCC2	((uint)0x0100)
-#define PROFF_SPI	((uint)0x0180)
-#define PROFF_SCC3	((uint)0x0200)
-#define PROFF_SMC1	((uint)0x0280)
-#define PROFF_SCC4	((uint)0x0300)
-#define PROFF_SMC2	((uint)0x0380)
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
-	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	smc_rfcr;	/* Rx function code */
-	u_char	smc_tfcr;	/* Tx function code */
-	ushort	smc_mrblr;	/* Max receive buffer length */
-	uint	smc_rstate;	/* Internal */
-	uint	smc_idp;	/* Internal */
-	ushort	smc_rbptr;	/* Internal */
-	ushort	smc_ibc;	/* Internal */
-	uint	smc_rxtmp;	/* Internal */
-	uint	smc_tstate;	/* Internal */
-	uint	smc_tdp;	/* Internal */
-	ushort	smc_tbptr;	/* Internal */
-	ushort	smc_tbc;	/* Internal */
-	uint	smc_txtmp;	/* Internal */
-	ushort	smc_maxidl;	/* Maximum idle characters */
-	ushort	smc_tmpidl;	/* Temporary idle counter */
-	ushort	smc_brklen;	/* Last received break length */
-	ushort	smc_brkec;	/* rcv'd break condition counter */
-	ushort	smc_brkcr;	/* xmt break count register */
-	ushort	smc_rmask;	/* Temporary bit mask */
-	char	res1[8];	/* Reserved */
-	ushort	smc_rpbase;	/* Relocation pointer */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define	SMCMR_REN	((ushort)0x0001)
-#define SMCMR_TEN	((ushort)0x0002)
-#define SMCMR_DM	((ushort)0x000c)
-#define SMCMR_SM_GCI	((ushort)0x0000)
-#define SMCMR_SM_UART	((ushort)0x0020)
-#define SMCMR_SM_TRANS	((ushort)0x0030)
-#define SMCMR_SM_MASK	((ushort)0x0030)
-#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
-#define SMCMR_REVD	SMCMR_PM_EVEN
-#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
-#define SMCMR_BS	SMCMR_PEN
-#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
-#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
-#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer.  It is half duplex, in that
- * it can only receive or transmit.  The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
-	ushort	scent_rbase;
-	ushort	scent_tbase;
-	u_char	scent_cfcr;
-	u_char	scent_smask;
-	ushort	scent_mrblr;
-	uint	scent_rstate;
-	uint	scent_r_ptr;
-	ushort	scent_rbptr;
-	ushort	scent_r_cnt;
-	uint	scent_rtemp;
-	uint	scent_tstate;
-	uint	scent_t_ptr;
-	ushort	scent_tbptr;
-	ushort	scent_t_cnt;
-	uint	scent_ttemp;
-	ushort	scent_max_sl;
-	ushort	scent_sl_cnt;
-	ushort	scent_character1;
-	ushort	scent_character2;
-	ushort	scent_character3;
-	ushort	scent_character4;
-	ushort	scent_character5;
-	ushort	scent_character6;
-	ushort	scent_character7;
-	ushort	scent_character8;
-	ushort	scent_rccm;
-	ushort	scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F	((u_char)0x08)
-#define SMC_CENT_PE	((u_char)0x04)
-#define SMC_CENT_S	((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
-#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
-#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
-#define	SMCM_BSY	((unsigned char)0x04)
-#define	SMCM_TX		((unsigned char)0x02)
-#define	SMCM_RX		((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
-/* SI Clock Route Register
-*/
-#define SICR_RCLK_SCC1_BRG1	((uint)0x00000000)
-#define SICR_TCLK_SCC1_BRG1	((uint)0x00000000)
-#define SICR_RCLK_SCC2_BRG2	((uint)0x00000800)
-#define SICR_TCLK_SCC2_BRG2	((uint)0x00000100)
-#define SICR_RCLK_SCC3_BRG3	((uint)0x00100000)
-#define SICR_TCLK_SCC3_BRG3	((uint)0x00020000)
-#define SICR_RCLK_SCC4_BRG4	((uint)0x18000000)
-#define SICR_TCLK_SCC4_BRG4	((uint)0x03000000)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP		((uint)0x00040000)
-#define SCC_GSMRH_GDE		((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
-#define SCC_GSMRH_REVD		((uint)0x00002000)
-#define SCC_GSMRH_TRX		((uint)0x00001000)
-#define SCC_GSMRH_TTX		((uint)0x00000800)
-#define SCC_GSMRH_CDP		((uint)0x00000400)
-#define SCC_GSMRH_CTSP		((uint)0x00000200)
-#define SCC_GSMRH_CDS		((uint)0x00000100)
-#define SCC_GSMRH_CTSS		((uint)0x00000080)
-#define SCC_GSMRH_TFL		((uint)0x00000040)
-#define SCC_GSMRH_RFW		((uint)0x00000020)
-#define SCC_GSMRH_TXSY		((uint)0x00000010)
-#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8		((uint)0x00000008)
-#define SCC_GSMRH_SYNL4		((uint)0x00000004)
-#define SCC_GSMRH_RTSM		((uint)0x00000002)
-#define SCC_GSMRH_RSYN		((uint)0x00000001)
-
-#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
-#define SCC_GSMRL_TCI		((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
-#define SCC_GSMRL_RINV		((uint)0x02000000)
-#define SCC_GSMRL_TINV		((uint)0x01000000)
-#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48	((uint)0x00800000)
-#define SCC_GSMRL_TPL_32	((uint)0x00600000)
-#define SCC_GSMRL_TPL_16	((uint)0x00400000)
-#define SCC_GSMRL_TPL_8		((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
-#define SCC_GSMRL_TPP_01	((uint)0x00100000)
-#define SCC_GSMRL_TPP_10	((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
-#define SCC_GSMRL_TEND		((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
-#define SCC_GSMRL_ENR		((uint)0x00000020)
-#define SCC_GSMRL_ENT		((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
-#define SCC_GSMRL_MODE_QMC	((uint)0x0000000a)
-#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
-
-#define SCC_TODR_TOD		((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define	SCCM_TXE	((unsigned char)0x10)
-#define	SCCM_BSY	((unsigned char)0x04)
-#define	SCCM_TX		((unsigned char)0x02)
-#define	SCCM_RX		((unsigned char)0x01)
-
-typedef struct scc_param {
-	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	scc_rfcr;	/* Rx function code */
-	u_char	scc_tfcr;	/* Tx function code */
-	ushort	scc_mrblr;	/* Max receive buffer length */
-	uint	scc_rstate;	/* Internal */
-	uint	scc_idp;	/* Internal */
-	ushort	scc_rbptr;	/* Internal */
-	ushort	scc_ibc;	/* Internal */
-	uint	scc_rxtmp;	/* Internal */
-	uint	scc_tstate;	/* Internal */
-	uint	scc_tdp;	/* Internal */
-	ushort	scc_tbptr;	/* Internal */
-	ushort	scc_tbc;	/* Internal */
-	uint	scc_txtmp;	/* Internal */
-	uint	scc_rcrc;	/* Internal */
-	uint	scc_tcrc;	/* Internal */
-} sccp_t;
-
-/* Function code bits.
-*/
-#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* CPM Ethernet through SCCx.
- */
-typedef struct scc_enet {
-	sccp_t	sen_genscc;
-	uint	sen_cpres;	/* Preset CRC */
-	uint	sen_cmask;	/* Constant mask for CRC */
-	uint	sen_crcec;	/* CRC Error counter */
-	uint	sen_alec;	/* alignment error counter */
-	uint	sen_disfc;	/* discard frame counter */
-	ushort	sen_pads;	/* Tx short frame pad character */
-	ushort	sen_retlim;	/* Retry limit threshold */
-	ushort	sen_retcnt;	/* Retry limit counter */
-	ushort	sen_maxflr;	/* maximum frame length register */
-	ushort	sen_minflr;	/* minimum frame length register */
-	ushort	sen_maxd1;	/* maximum DMA1 length */
-	ushort	sen_maxd2;	/* maximum DMA2 length */
-	ushort	sen_maxd;	/* Rx max DMA */
-	ushort	sen_dmacnt;	/* Rx DMA counter */
-	ushort	sen_maxb;	/* Max BD byte count */
-	ushort	sen_gaddr1;	/* Group address filter */
-	ushort	sen_gaddr2;
-	ushort	sen_gaddr3;
-	ushort	sen_gaddr4;
-	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf0rba;	/* Internal */
-	uint	sen_tbuf0crc;	/* Internal */
-	ushort	sen_tbuf0bcnt;	/* Internal */
-	ushort	sen_paddrh;	/* physical address (MSB) */
-	ushort	sen_paddrm;
-	ushort	sen_paddrl;	/* physical address (LSB) */
-	ushort	sen_pper;	/* persistence */
-	ushort	sen_rfbdptr;	/* Rx first BD pointer */
-	ushort	sen_tfbdptr;	/* Tx first BD pointer */
-	ushort	sen_tlbdptr;	/* Tx last BD pointer */
-	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf1rba;	/* Internal */
-	uint	sen_tbuf1crc;	/* Internal */
-	ushort	sen_tbuf1bcnt;	/* Internal */
-	ushort	sen_txlen;	/* Tx Frame length counter */
-	ushort	sen_iaddr1;	/* Individual address filter */
-	ushort	sen_iaddr2;
-	ushort	sen_iaddr3;
-	ushort	sen_iaddr4;
-	ushort	sen_boffcnt;	/* Backoff counter */
-
-	/* NOTE: Some versions of the manual have the following items
-	 * incorrectly documented.  Below is the proper order.
-	 */
-	ushort	sen_taddrh;	/* temp address (MSB) */
-	ushort	sen_taddrm;
-	ushort	sen_taddrl;	/* temp address (LSB) */
-} scc_enet_t;
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
-#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
-#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
-#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
-#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
-#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
-#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
-#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
-#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
-#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
-#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
-#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
-#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
-#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
-#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
-#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
-#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-	sccp_t	scc_genscc;
-	char	res1[8];	/* Reserved */
-	ushort	scc_maxidl;	/* Maximum idle chars */
-	ushort	scc_idlc;	/* temp idle counter */
-	ushort	scc_brkcr;	/* Break count register */
-	ushort	scc_parec;	/* receive parity error counter */
-	ushort	scc_frmec;	/* receive framing error counter */
-	ushort	scc_nosec;	/* receive noise counter */
-	ushort	scc_brkec;	/* receive break condition counter */
-	ushort	scc_brkln;	/* last received break length */
-	ushort	scc_uaddr1;	/* UART address character 1 */
-	ushort	scc_uaddr2;	/* UART address character 2 */
-	ushort	scc_rtemp;	/* Temp storage */
-	ushort	scc_toseq;	/* Transmit out of sequence char */
-	ushort	scc_char1;	/* control character 1 */
-	ushort	scc_char2;	/* control character 2 */
-	ushort	scc_char3;	/* control character 3 */
-	ushort	scc_char4;	/* control character 4 */
-	ushort	scc_char5;	/* control character 5 */
-	ushort	scc_char6;	/* control character 6 */
-	ushort	scc_char7;	/* control character 7 */
-	ushort	scc_char8;	/* control character 8 */
-	ushort	scc_rccm;	/* receive control character mask */
-	ushort	scc_rccr;	/* receive control character register */
-	ushort	scc_rlbc;	/* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR		((ushort)0x1000)
-#define UART_SCCM_GLT		((ushort)0x0800)
-#define UART_SCCM_AB		((ushort)0x0200)
-#define UART_SCCM_IDL		((ushort)0x0100)
-#define UART_SCCM_GRA		((ushort)0x0080)
-#define UART_SCCM_BRKE		((ushort)0x0040)
-#define UART_SCCM_BRKS		((ushort)0x0020)
-#define UART_SCCM_CCR		((ushort)0x0008)
-#define UART_SCCM_BSY		((ushort)0x0004)
-#define UART_SCCM_TX		((ushort)0x0002)
-#define UART_SCCM_RX		((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PSMR_FLC		((ushort)0x8000)
-#define SCU_PSMR_SL		((ushort)0x4000)
-#define SCU_PSMR_CL		((ushort)0x3000)
-#define SCU_PSMR_UM		((ushort)0x0c00)
-#define SCU_PSMR_FRZ		((ushort)0x0200)
-#define SCU_PSMR_RZS		((ushort)0x0100)
-#define SCU_PSMR_SYN		((ushort)0x0080)
-#define SCU_PSMR_DRT		((ushort)0x0040)
-#define SCU_PSMR_PEN		((ushort)0x0010)
-#define SCU_PSMR_RPM		((ushort)0x000c)
-#define SCU_PSMR_REVP		((ushort)0x0008)
-#define SCU_PSMR_TPM		((ushort)0x0003)
-#define SCU_PSMR_TEVP		((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-	sccp_t	st_genscc;
-	uint	st_cpres;	/* Preset CRC */
-	uint	st_cmask;	/* Constant mask for CRC */
-} scc_trans_t;
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
-	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
-	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
-	u_char	iic_rfcr;	/* Rx function code */
-	u_char	iic_tfcr;	/* Tx function code */
-	ushort	iic_mrblr;	/* Max receive buffer length */
-	uint	iic_rstate;	/* Internal */
-	uint	iic_rdp;	/* Internal */
-	ushort	iic_rbptr;	/* Internal */
-	ushort	iic_rbc;	/* Internal */
-	uint	iic_rxtmp;	/* Internal */
-	uint	iic_tstate;	/* Internal */
-	uint	iic_tdp;	/* Internal */
-	ushort	iic_tbptr;	/* Internal */
-	ushort	iic_tbc;	/* Internal */
-	uint	iic_txtmp;	/* Internal */
-	char	res1[4];	/* Reserved */
-	ushort	iic_rpbase;	/* Relocation pointer */
-	char	res2[2];	/* Reserved */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
-	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
-	u_char	spi_rfcr;	/* Rx function code */
-	u_char	spi_tfcr;	/* Tx function code */
-	ushort	spi_mrblr;	/* Max receive buffer length */
-	uint	spi_rstate;	/* Internal */
-	uint	spi_rdp;	/* Internal */
-	ushort	spi_rbptr;	/* Internal */
-	ushort	spi_rbc;	/* Internal */
-	uint	spi_rxtmp;	/* Internal */
-	uint	spi_tstate;	/* Internal */
-	uint	spi_tdp;	/* Internal */
-	ushort	spi_tbptr;	/* Internal */
-	ushort	spi_tbc;	/* Internal */
-	uint	spi_txtmp;	/* Internal */
-	uint	spi_res;
-	ushort	spi_rpbase;	/* Relocation pointer */
-	ushort	spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
-#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
-#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
-#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
-#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
-#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
-#define SPMODE_EN	((ushort)0x0100)	/* Enable */
-#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
-#define SPMODE_LEN4	((ushort)0x0030)	/*  4 bits per char */
-#define SPMODE_LEN8	((ushort)0x0070)	/*  8 bits per char */
-#define SPMODE_LEN16	((ushort)0x00f0)	/* 16 bits per char */
-#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME	0x20
-#define SPIE_TXE	0x10
-#define SPIE_BSY	0x04
-#define SPIE_TXB	0x02
-#define SPIE_RXB	0x01
-
-/*
- * RISC Controller Configuration Register definitons
- */
-#define RCCR_TIME	0x8000			/* RISC Timer Enable */
-#define RCCR_TIMEP(t)	(((t) & 0x3F)<<8)	/* RISC Timer Period */
-#define RCCR_TIME_MASK	0x00FF			/* not RISC Timer related bits */
-
-/* RISC Timer Parameter RAM offset */
-#define PROFF_RTMR	((uint)0x01B0)
-
-typedef struct risc_timer_pram {
-	unsigned short	tm_base;	/* RISC Timer Table Base Address */
-	unsigned short	tm_ptr;		/* RISC Timer Table Pointer (internal) */
-	unsigned short	r_tmr;		/* RISC Timer Mode Register */
-	unsigned short	r_tmv;		/* RISC Timer Valid Register */
-	unsigned long	tm_cmd;		/* RISC Timer Command Register */
-	unsigned long	tm_cnt;		/* RISC Timer Internal Count */
-} rt_pram_t;
-
-/* Bits in RISC Timer Command Register */
-#define TM_CMD_VALID	0x80000000	/* Valid - Enables the timer */
-#define TM_CMD_RESTART	0x40000000	/* Restart - for automatic restart */
-#define TM_CMD_PWM	0x20000000	/* Run in Pulse Width Modulation Mode */
-#define TM_CMD_NUM(n)	(((n)&0xF)<<16)	/* Timer Number */
-#define TM_CMD_PERIOD(p) ((p)&0xFFFF)	/* Timer Period */
-
-/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
- * channels or devices.  All of these are presented to the PPC core
- * as a single interrupt.  The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler.  We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-#define CPMVEC_NR		32
-#define	CPMVEC_PIO_PC15		((ushort)0x1f)
-#define	CPMVEC_SCC1		((ushort)0x1e)
-#define	CPMVEC_SCC2		((ushort)0x1d)
-#define	CPMVEC_SCC3		((ushort)0x1c)
-#define	CPMVEC_SCC4		((ushort)0x1b)
-#define	CPMVEC_PIO_PC14		((ushort)0x1a)
-#define	CPMVEC_TIMER1		((ushort)0x19)
-#define	CPMVEC_PIO_PC13		((ushort)0x18)
-#define	CPMVEC_PIO_PC12		((ushort)0x17)
-#define	CPMVEC_SDMA_CB_ERR	((ushort)0x16)
-#define CPMVEC_IDMA1		((ushort)0x15)
-#define CPMVEC_IDMA2		((ushort)0x14)
-#define CPMVEC_TIMER2		((ushort)0x12)
-#define CPMVEC_RISCTIMER	((ushort)0x11)
-#define CPMVEC_I2C		((ushort)0x10)
-#define	CPMVEC_PIO_PC11		((ushort)0x0f)
-#define	CPMVEC_PIO_PC10		((ushort)0x0e)
-#define CPMVEC_TIMER3		((ushort)0x0c)
-#define	CPMVEC_PIO_PC9		((ushort)0x0b)
-#define	CPMVEC_PIO_PC8		((ushort)0x0a)
-#define	CPMVEC_PIO_PC7		((ushort)0x09)
-#define CPMVEC_TIMER4		((ushort)0x07)
-#define	CPMVEC_PIO_PC6		((ushort)0x06)
-#define	CPMVEC_SPI		((ushort)0x05)
-#define	CPMVEC_SMC1		((ushort)0x04)
-#define	CPMVEC_SMC2		((ushort)0x03)
-#define	CPMVEC_PIO_PC5		((ushort)0x02)
-#define	CPMVEC_PIO_PC4		((ushort)0x01)
-#define	CPMVEC_ERROR		((ushort)0x00)
-
-/* CPM interrupt configuration vector.
-*/
-#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
-#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
-#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
-#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
-#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
-#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
-#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
-
-#define IMAP_ADDR		(get_immrbase())
-
-#define CPM_PIN_INPUT     0
-#define CPM_PIN_OUTPUT    1
-#define CPM_PIN_PRIMARY   0
-#define CPM_PIN_SECONDARY 2
-#define CPM_PIN_GPIO      4
-#define CPM_PIN_OPENDRAIN 8
-
-enum cpm_port {
-	CPM_PORTA,
-	CPM_PORTB,
-	CPM_PORTC,
-	CPM_PORTD,
-	CPM_PORTE,
-};
-
-void cpm1_set_pin(enum cpm_port port, int pin, int flags);
-
-enum cpm_clk_dir {
-	CPM_CLK_RX,
-	CPM_CLK_TX,
-	CPM_CLK_RTX
-};
-
-enum cpm_clk_target {
-	CPM_CLK_SCC1,
-	CPM_CLK_SCC2,
-	CPM_CLK_SCC3,
-	CPM_CLK_SCC4,
-	CPM_CLK_SMC1,
-	CPM_CLK_SMC2,
-};
-
-enum cpm_clk {
-	CPM_BRG1,	/* Baud Rate Generator  1 */
-	CPM_BRG2,	/* Baud Rate Generator  2 */
-	CPM_BRG3,	/* Baud Rate Generator  3 */
-	CPM_BRG4,	/* Baud Rate Generator  4 */
-	CPM_CLK1,	/* Clock  1 */
-	CPM_CLK2,	/* Clock  2 */
-	CPM_CLK3,	/* Clock  3 */
-	CPM_CLK4,	/* Clock  4 */
-	CPM_CLK5,	/* Clock  5 */
-	CPM_CLK6,	/* Clock  6 */
-	CPM_CLK7,	/* Clock  7 */
-	CPM_CLK8,	/* Clock  8 */
-};
-
-int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
-
-#endif /* __CPM1__ */
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
deleted file mode 100644
index 2c7fd9cee291..000000000000
--- a/include/asm-powerpc/cpm2.h
+++ /dev/null
@@ -1,1175 +0,0 @@
-/*
- * Communication Processor Module v2.
- *
- * This file contains structures and information for the communication
- * processor channels found in the dual port RAM or parameter RAM.
- * All CPM control and status is available through the CPM2 internal
- * memory map.  See immap_cpm2.h for details.
- */
-#ifdef __KERNEL__
-#ifndef __CPM2__
-#define __CPM2__
-
-#include <asm/immap_cpm2.h>
-#include <asm/cpm.h>
-
-#ifdef CONFIG_PPC_85xx
-#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
-#endif
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST	((uint)0x80000000)
-#define CPM_CR_PAGE	((uint)0x7c000000)
-#define CPM_CR_SBLOCK	((uint)0x03e00000)
-#define CPM_CR_FLG	((uint)0x00010000)
-#define CPM_CR_MCN	((uint)0x00003fc0)
-#define CPM_CR_OPCODE	((uint)0x0000000f)
-
-/* Device sub-block and page codes.
-*/
-#define CPM_CR_SCC1_SBLOCK	(0x04)
-#define CPM_CR_SCC2_SBLOCK	(0x05)
-#define CPM_CR_SCC3_SBLOCK	(0x06)
-#define CPM_CR_SCC4_SBLOCK	(0x07)
-#define CPM_CR_SMC1_SBLOCK	(0x08)
-#define CPM_CR_SMC2_SBLOCK	(0x09)
-#define CPM_CR_SPI_SBLOCK	(0x0a)
-#define CPM_CR_I2C_SBLOCK	(0x0b)
-#define CPM_CR_TIMER_SBLOCK	(0x0f)
-#define CPM_CR_RAND_SBLOCK	(0x0e)
-#define CPM_CR_FCC1_SBLOCK	(0x10)
-#define CPM_CR_FCC2_SBLOCK	(0x11)
-#define CPM_CR_FCC3_SBLOCK	(0x12)
-#define CPM_CR_IDMA1_SBLOCK	(0x14)
-#define CPM_CR_IDMA2_SBLOCK	(0x15)
-#define CPM_CR_IDMA3_SBLOCK	(0x16)
-#define CPM_CR_IDMA4_SBLOCK	(0x17)
-#define CPM_CR_MCC1_SBLOCK	(0x1c)
-
-#define CPM_CR_FCC_SBLOCK(x)	(x + 0x10)
-
-#define CPM_CR_SCC1_PAGE	(0x00)
-#define CPM_CR_SCC2_PAGE	(0x01)
-#define CPM_CR_SCC3_PAGE	(0x02)
-#define CPM_CR_SCC4_PAGE	(0x03)
-#define CPM_CR_SMC1_PAGE	(0x07)
-#define CPM_CR_SMC2_PAGE	(0x08)
-#define CPM_CR_SPI_PAGE		(0x09)
-#define CPM_CR_I2C_PAGE		(0x0a)
-#define CPM_CR_TIMER_PAGE	(0x0a)
-#define CPM_CR_RAND_PAGE	(0x0a)
-#define CPM_CR_FCC1_PAGE	(0x04)
-#define CPM_CR_FCC2_PAGE	(0x05)
-#define CPM_CR_FCC3_PAGE	(0x06)
-#define CPM_CR_IDMA1_PAGE	(0x07)
-#define CPM_CR_IDMA2_PAGE	(0x08)
-#define CPM_CR_IDMA3_PAGE	(0x09)
-#define CPM_CR_IDMA4_PAGE	(0x0a)
-#define CPM_CR_MCC1_PAGE	(0x07)
-#define CPM_CR_MCC2_PAGE	(0x08)
-
-#define CPM_CR_FCC_PAGE(x)	(x + 0x04)
-
-/* CPM2-specific opcodes (see cpm.h for common opcodes)
-*/
-#define CPM_CR_START_IDMA	((ushort)0x0009)
-
-#define mk_cr_cmd(PG, SBC, MCN, OP) \
-	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-
-/* The number of pages of host memory we allocate for CPM.  This is
- * done early in kernel initialization to get physically contiguous
- * pages.
- */
-#define NUM_CPM_HOST_PAGES	2
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
-
-#define cpm_dpalloc cpm_muram_alloc
-#define cpm_dpfree cpm_muram_free
-#define cpm_dpram_addr cpm_muram_addr
-
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
-extern void cpm2_reset(void);
-
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
-#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
-#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
-#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
-#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
-
-/* Parameter RAM offsets from the base.
-*/
-#define PROFF_SCC1		((uint)0x8000)
-#define PROFF_SCC2		((uint)0x8100)
-#define PROFF_SCC3		((uint)0x8200)
-#define PROFF_SCC4		((uint)0x8300)
-#define PROFF_FCC1		((uint)0x8400)
-#define PROFF_FCC2		((uint)0x8500)
-#define PROFF_FCC3		((uint)0x8600)
-#define PROFF_MCC1		((uint)0x8700)
-#define PROFF_SMC1_BASE		((uint)0x87fc)
-#define PROFF_IDMA1_BASE	((uint)0x87fe)
-#define PROFF_MCC2		((uint)0x8800)
-#define PROFF_SMC2_BASE		((uint)0x88fc)
-#define PROFF_IDMA2_BASE	((uint)0x88fe)
-#define PROFF_SPI_BASE		((uint)0x89fc)
-#define PROFF_IDMA3_BASE	((uint)0x89fe)
-#define PROFF_TIMERS		((uint)0x8ae0)
-#define PROFF_REVNUM		((uint)0x8af0)
-#define PROFF_RAND		((uint)0x8af8)
-#define PROFF_I2C_BASE		((uint)0x8afc)
-#define PROFF_IDMA4_BASE	((uint)0x8afe)
-
-#define PROFF_SCC_SIZE		((uint)0x100)
-#define PROFF_FCC_SIZE		((uint)0x100)
-#define PROFF_SMC_SIZE		((uint)64)
-
-/* The SMCs are relocated to any of the first eight DPRAM pages.
- * We will fix these at the first locations of DPRAM, until we
- * get some microcode patches :-).
- * The parameter ram space for the SMCs is fifty-some bytes, and
- * they are required to start on a 64 byte boundary.
- */
-#define PROFF_SMC1	(0)
-#define PROFF_SMC2	(64)
-
-
-/* Define enough so I can at least use the serial port as a UART.
- */
-typedef struct smc_uart {
-	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	smc_rfcr;	/* Rx function code */
-	u_char	smc_tfcr;	/* Tx function code */
-	ushort	smc_mrblr;	/* Max receive buffer length */
-	uint	smc_rstate;	/* Internal */
-	uint	smc_idp;	/* Internal */
-	ushort	smc_rbptr;	/* Internal */
-	ushort	smc_ibc;	/* Internal */
-	uint	smc_rxtmp;	/* Internal */
-	uint	smc_tstate;	/* Internal */
-	uint	smc_tdp;	/* Internal */
-	ushort	smc_tbptr;	/* Internal */
-	ushort	smc_tbc;	/* Internal */
-	uint	smc_txtmp;	/* Internal */
-	ushort	smc_maxidl;	/* Maximum idle characters */
-	ushort	smc_tmpidl;	/* Temporary idle counter */
-	ushort	smc_brklen;	/* Last received break length */
-	ushort	smc_brkec;	/* rcv'd break condition counter */
-	ushort	smc_brkcr;	/* xmt break count register */
-	ushort	smc_rmask;	/* Temporary bit mask */
-	uint	smc_stmp;	/* SDMA Temp */
-} smc_uart_t;
-
-/* SMC uart mode register (Internal memory map).
-*/
-#define SMCMR_REN	((ushort)0x0001)
-#define SMCMR_TEN	((ushort)0x0002)
-#define SMCMR_DM	((ushort)0x000c)
-#define SMCMR_SM_GCI	((ushort)0x0000)
-#define SMCMR_SM_UART	((ushort)0x0020)
-#define SMCMR_SM_TRANS	((ushort)0x0030)
-#define SMCMR_SM_MASK	((ushort)0x0030)
-#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
-#define SMCMR_REVD	SMCMR_PM_EVEN
-#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
-#define SMCMR_BS	SMCMR_PEN
-#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
-#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
-#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
-#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
-#define SMCM_TXE	((unsigned char)0x10)
-#define SMCM_BSY	((unsigned char)0x04)
-#define SMCM_TX		((unsigned char)0x02)
-#define SMCM_RX		((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP		((uint)0x00040000)
-#define SCC_GSMRH_GDE		((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
-#define SCC_GSMRH_REVD		((uint)0x00002000)
-#define SCC_GSMRH_TRX		((uint)0x00001000)
-#define SCC_GSMRH_TTX		((uint)0x00000800)
-#define SCC_GSMRH_CDP		((uint)0x00000400)
-#define SCC_GSMRH_CTSP		((uint)0x00000200)
-#define SCC_GSMRH_CDS		((uint)0x00000100)
-#define SCC_GSMRH_CTSS		((uint)0x00000080)
-#define SCC_GSMRH_TFL		((uint)0x00000040)
-#define SCC_GSMRH_RFW		((uint)0x00000020)
-#define SCC_GSMRH_TXSY		((uint)0x00000010)
-#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8		((uint)0x00000008)
-#define SCC_GSMRH_SYNL4		((uint)0x00000004)
-#define SCC_GSMRH_RTSM		((uint)0x00000002)
-#define SCC_GSMRH_RSYN		((uint)0x00000001)
-
-#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
-#define SCC_GSMRL_TCI		((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
-#define SCC_GSMRL_RINV		((uint)0x02000000)
-#define SCC_GSMRL_TINV		((uint)0x01000000)
-#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48	((uint)0x00800000)
-#define SCC_GSMRL_TPL_32	((uint)0x00600000)
-#define SCC_GSMRL_TPL_16	((uint)0x00400000)
-#define SCC_GSMRL_TPL_8		((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
-#define SCC_GSMRL_TPP_01	((uint)0x00100000)
-#define SCC_GSMRL_TPP_10	((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
-#define SCC_GSMRL_TEND		((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
-#define SCC_GSMRL_ENR		((uint)0x00000020)
-#define SCC_GSMRL_ENT		((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
-
-#define SCC_TODR_TOD		((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE	((unsigned char)0x10)
-#define SCCM_BSY	((unsigned char)0x04)
-#define SCCM_TX		((unsigned char)0x02)
-#define SCCM_RX		((unsigned char)0x01)
-
-typedef struct scc_param {
-	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	scc_rfcr;	/* Rx function code */
-	u_char	scc_tfcr;	/* Tx function code */
-	ushort	scc_mrblr;	/* Max receive buffer length */
-	uint	scc_rstate;	/* Internal */
-	uint	scc_idp;	/* Internal */
-	ushort	scc_rbptr;	/* Internal */
-	ushort	scc_ibc;	/* Internal */
-	uint	scc_rxtmp;	/* Internal */
-	uint	scc_tstate;	/* Internal */
-	uint	scc_tdp;	/* Internal */
-	ushort	scc_tbptr;	/* Internal */
-	ushort	scc_tbc;	/* Internal */
-	uint	scc_txtmp;	/* Internal */
-	uint	scc_rcrc;	/* Internal */
-	uint	scc_tcrc;	/* Internal */
-} sccp_t;
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
-	sccp_t	sen_genscc;
-	uint	sen_cpres;	/* Preset CRC */
-	uint	sen_cmask;	/* Constant mask for CRC */
-	uint	sen_crcec;	/* CRC Error counter */
-	uint	sen_alec;	/* alignment error counter */
-	uint	sen_disfc;	/* discard frame counter */
-	ushort	sen_pads;	/* Tx short frame pad character */
-	ushort	sen_retlim;	/* Retry limit threshold */
-	ushort	sen_retcnt;	/* Retry limit counter */
-	ushort	sen_maxflr;	/* maximum frame length register */
-	ushort	sen_minflr;	/* minimum frame length register */
-	ushort	sen_maxd1;	/* maximum DMA1 length */
-	ushort	sen_maxd2;	/* maximum DMA2 length */
-	ushort	sen_maxd;	/* Rx max DMA */
-	ushort	sen_dmacnt;	/* Rx DMA counter */
-	ushort	sen_maxb;	/* Max BD byte count */
-	ushort	sen_gaddr1;	/* Group address filter */
-	ushort	sen_gaddr2;
-	ushort	sen_gaddr3;
-	ushort	sen_gaddr4;
-	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf0rba;	/* Internal */
-	uint	sen_tbuf0crc;	/* Internal */
-	ushort	sen_tbuf0bcnt;	/* Internal */
-	ushort	sen_paddrh;	/* physical address (MSB) */
-	ushort	sen_paddrm;
-	ushort	sen_paddrl;	/* physical address (LSB) */
-	ushort	sen_pper;	/* persistence */
-	ushort	sen_rfbdptr;	/* Rx first BD pointer */
-	ushort	sen_tfbdptr;	/* Tx first BD pointer */
-	ushort	sen_tlbdptr;	/* Tx last BD pointer */
-	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf1rba;	/* Internal */
-	uint	sen_tbuf1crc;	/* Internal */
-	ushort	sen_tbuf1bcnt;	/* Internal */
-	ushort	sen_txlen;	/* Tx Frame length counter */
-	ushort	sen_iaddr1;	/* Individual address filter */
-	ushort	sen_iaddr2;
-	ushort	sen_iaddr3;
-	ushort	sen_iaddr4;
-	ushort	sen_boffcnt;	/* Backoff counter */
-
-	/* NOTE: Some versions of the manual have the following items
-	 * incorrectly documented.  Below is the proper order.
-	 */
-	ushort	sen_taddrh;	/* temp address (MSB) */
-	ushort	sen_taddrm;
-	ushort	sen_taddrl;	/* temp address (LSB) */
-} scc_enet_t;
-
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
-#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
-#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
-#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
-#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
-#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
-#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
-#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
-#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
-#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
-#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
-#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
-#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
-#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
-#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
-#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
-#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-	sccp_t	scc_genscc;
-	uint	scc_res1;	/* Reserved */
-	uint	scc_res2;	/* Reserved */
-	ushort	scc_maxidl;	/* Maximum idle chars */
-	ushort	scc_idlc;	/* temp idle counter */
-	ushort	scc_brkcr;	/* Break count register */
-	ushort	scc_parec;	/* receive parity error counter */
-	ushort	scc_frmec;	/* receive framing error counter */
-	ushort	scc_nosec;	/* receive noise counter */
-	ushort	scc_brkec;	/* receive break condition counter */
-	ushort	scc_brkln;	/* last received break length */
-	ushort	scc_uaddr1;	/* UART address character 1 */
-	ushort	scc_uaddr2;	/* UART address character 2 */
-	ushort	scc_rtemp;	/* Temp storage */
-	ushort	scc_toseq;	/* Transmit out of sequence char */
-	ushort	scc_char1;	/* control character 1 */
-	ushort	scc_char2;	/* control character 2 */
-	ushort	scc_char3;	/* control character 3 */
-	ushort	scc_char4;	/* control character 4 */
-	ushort	scc_char5;	/* control character 5 */
-	ushort	scc_char6;	/* control character 6 */
-	ushort	scc_char7;	/* control character 7 */
-	ushort	scc_char8;	/* control character 8 */
-	ushort	scc_rccm;	/* receive control character mask */
-	ushort	scc_rccr;	/* receive control character register */
-	ushort	scc_rlbc;	/* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR		((ushort)0x1000)
-#define UART_SCCM_GLT		((ushort)0x0800)
-#define UART_SCCM_AB		((ushort)0x0200)
-#define UART_SCCM_IDL		((ushort)0x0100)
-#define UART_SCCM_GRA		((ushort)0x0080)
-#define UART_SCCM_BRKE		((ushort)0x0040)
-#define UART_SCCM_BRKS		((ushort)0x0020)
-#define UART_SCCM_CCR		((ushort)0x0008)
-#define UART_SCCM_BSY		((ushort)0x0004)
-#define UART_SCCM_TX		((ushort)0x0002)
-#define UART_SCCM_RX		((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC		((ushort)0x8000)
-#define SCU_PSMR_SL		((ushort)0x4000)
-#define SCU_PSMR_CL		((ushort)0x3000)
-#define SCU_PSMR_UM		((ushort)0x0c00)
-#define SCU_PSMR_FRZ		((ushort)0x0200)
-#define SCU_PSMR_RZS		((ushort)0x0100)
-#define SCU_PSMR_SYN		((ushort)0x0080)
-#define SCU_PSMR_DRT		((ushort)0x0040)
-#define SCU_PSMR_PEN		((ushort)0x0010)
-#define SCU_PSMR_RPM		((ushort)0x000c)
-#define SCU_PSMR_REVP		((ushort)0x0008)
-#define SCU_PSMR_TPM		((ushort)0x0003)
-#define SCU_PSMR_TEVP		((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-	sccp_t	st_genscc;
-	uint	st_cpres;	/* Preset CRC */
-	uint	st_cmask;	/* Constant mask for CRC */
-} scc_trans_t;
-
-/* How about some FCCs.....
-*/
-#define FCC_GFMR_DIAG_NORM	((uint)0x00000000)
-#define FCC_GFMR_DIAG_LE	((uint)0x40000000)
-#define FCC_GFMR_DIAG_AE	((uint)0x80000000)
-#define FCC_GFMR_DIAG_ALE	((uint)0xc0000000)
-#define FCC_GFMR_TCI		((uint)0x20000000)
-#define FCC_GFMR_TRX		((uint)0x10000000)
-#define FCC_GFMR_TTX		((uint)0x08000000)
-#define FCC_GFMR_TTX		((uint)0x08000000)
-#define FCC_GFMR_CDP		((uint)0x04000000)
-#define FCC_GFMR_CTSP		((uint)0x02000000)
-#define FCC_GFMR_CDS		((uint)0x01000000)
-#define FCC_GFMR_CTSS		((uint)0x00800000)
-#define FCC_GFMR_SYNL_NONE	((uint)0x00000000)
-#define FCC_GFMR_SYNL_AUTO	((uint)0x00004000)
-#define FCC_GFMR_SYNL_8		((uint)0x00008000)
-#define FCC_GFMR_SYNL_16	((uint)0x0000c000)
-#define FCC_GFMR_RTSM		((uint)0x00002000)
-#define FCC_GFMR_RENC_NRZ	((uint)0x00000000)
-#define FCC_GFMR_RENC_NRZI	((uint)0x00000800)
-#define FCC_GFMR_REVD		((uint)0x00000400)
-#define FCC_GFMR_TENC_NRZ	((uint)0x00000000)
-#define FCC_GFMR_TENC_NRZI	((uint)0x00000100)
-#define FCC_GFMR_TCRC_16	((uint)0x00000000)
-#define FCC_GFMR_TCRC_32	((uint)0x00000080)
-#define FCC_GFMR_ENR		((uint)0x00000020)
-#define FCC_GFMR_ENT		((uint)0x00000010)
-#define FCC_GFMR_MODE_ENET	((uint)0x0000000c)
-#define FCC_GFMR_MODE_ATM	((uint)0x0000000a)
-#define FCC_GFMR_MODE_HDLC	((uint)0x00000000)
-
-/* Generic FCC parameter ram.
-*/
-typedef struct fcc_param {
-	ushort	fcc_riptr;	/* Rx Internal temp pointer */
-	ushort	fcc_tiptr;	/* Tx Internal temp pointer */
-	ushort	fcc_res1;
-	ushort	fcc_mrblr;	/* Max receive buffer length, mod 32 bytes */
-	uint	fcc_rstate;	/* Upper byte is Func code, must be set */
-	uint	fcc_rbase;	/* Receive BD base */
-	ushort	fcc_rbdstat;	/* RxBD status */
-	ushort	fcc_rbdlen;	/* RxBD down counter */
-	uint	fcc_rdptr;	/* RxBD internal data pointer */
-	uint	fcc_tstate;	/* Upper byte is Func code, must be set */
-	uint	fcc_tbase;	/* Transmit BD base */
-	ushort	fcc_tbdstat;	/* TxBD status */
-	ushort	fcc_tbdlen;	/* TxBD down counter */
-	uint	fcc_tdptr;	/* TxBD internal data pointer */
-	uint	fcc_rbptr;	/* Rx BD Internal buf pointer */
-	uint	fcc_tbptr;	/* Tx BD Internal buf pointer */
-	uint	fcc_rcrc;	/* Rx temp CRC */
-	uint	fcc_res2;
-	uint	fcc_tcrc;	/* Tx temp CRC */
-} fccp_t;
-
-
-/* Ethernet controller through FCC.
-*/
-typedef struct fcc_enet {
-	fccp_t	fen_genfcc;
-	uint	fen_statbuf;	/* Internal status buffer */
-	uint	fen_camptr;	/* CAM address */
-	uint	fen_cmask;	/* Constant mask for CRC */
-	uint	fen_cpres;	/* Preset CRC */
-	uint	fen_crcec;	/* CRC Error counter */
-	uint	fen_alec;	/* alignment error counter */
-	uint	fen_disfc;	/* discard frame counter */
-	ushort	fen_retlim;	/* Retry limit */
-	ushort	fen_retcnt;	/* Retry counter */
-	ushort	fen_pper;	/* Persistence */
-	ushort	fen_boffcnt;	/* backoff counter */
-	uint	fen_gaddrh;	/* Group address filter, high 32-bits */
-	uint	fen_gaddrl;	/* Group address filter, low 32-bits */
-	ushort	fen_tfcstat;	/* out of sequence TxBD */
-	ushort	fen_tfclen;
-	uint	fen_tfcptr;
-	ushort	fen_mflr;	/* Maximum frame length (1518) */
-	ushort	fen_paddrh;	/* MAC address */
-	ushort	fen_paddrm;
-	ushort	fen_paddrl;
-	ushort	fen_ibdcount;	/* Internal BD counter */
-	ushort	fen_ibdstart;	/* Internal BD start pointer */
-	ushort	fen_ibdend;	/* Internal BD end pointer */
-	ushort	fen_txlen;	/* Internal Tx frame length counter */
-	uint	fen_ibdbase[8]; /* Internal use */
-	uint	fen_iaddrh;	/* Individual address filter */
-	uint	fen_iaddrl;
-	ushort	fen_minflr;	/* Minimum frame length (64) */
-	ushort	fen_taddrh;	/* Filter transfer MAC address */
-	ushort	fen_taddrm;
-	ushort	fen_taddrl;
-	ushort	fen_padptr;	/* Pointer to pad byte buffer */
-	ushort	fen_cftype;	/* control frame type */
-	ushort	fen_cfrange;	/* control frame range */
-	ushort	fen_maxb;	/* maximum BD count */
-	ushort	fen_maxd1;	/* Max DMA1 length (1520) */
-	ushort	fen_maxd2;	/* Max DMA2 length (1520) */
-	ushort	fen_maxd;	/* internal max DMA count */
-	ushort	fen_dmacnt;	/* internal DMA counter */
-	uint	fen_octc;	/* Total octect counter */
-	uint	fen_colc;	/* Total collision counter */
-	uint	fen_broc;	/* Total broadcast packet counter */
-	uint	fen_mulc;	/* Total multicast packet count */
-	uint	fen_uspc;	/* Total packets < 64 bytes */
-	uint	fen_frgc;	/* Total packets < 64 bytes with errors */
-	uint	fen_ospc;	/* Total packets > 1518 */
-	uint	fen_jbrc;	/* Total packets > 1518 with errors */
-	uint	fen_p64c;	/* Total packets == 64 bytes */
-	uint	fen_p65c;	/* Total packets 64 < bytes <= 127 */
-	uint	fen_p128c;	/* Total packets 127 < bytes <= 255 */
-	uint	fen_p256c;	/* Total packets 256 < bytes <= 511 */
-	uint	fen_p512c;	/* Total packets 512 < bytes <= 1023 */
-	uint	fen_p1024c;	/* Total packets 1024 < bytes <= 1518 */
-	uint	fen_cambuf;	/* Internal CAM buffer poiner */
-	ushort	fen_rfthr;	/* Received frames threshold */
-	ushort	fen_rfcnt;	/* Received frames count */
-} fcc_enet_t;
-
-/* FCC Event/Mask register as used by Ethernet.
-*/
-#define FCC_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-#define FCC_ENET_RXC	((ushort)0x0040)	/* Control Frame Received */
-#define FCC_ENET_TXC	((ushort)0x0020)	/* Out of seq. Tx sent */
-#define FCC_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
-#define FCC_ENET_RXF	((ushort)0x0008)	/* Full frame received */
-#define FCC_ENET_BSY	((ushort)0x0004)	/* Busy.  Rx Frame dropped */
-#define FCC_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
-#define FCC_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
-
-/* FCC Mode Register (FPSMR) as used by Ethernet.
-*/
-#define FCC_PSMR_HBC	((uint)0x80000000)	/* Enable heartbeat */
-#define FCC_PSMR_FC	((uint)0x40000000)	/* Force Collision */
-#define FCC_PSMR_SBT	((uint)0x20000000)	/* Stop backoff timer */
-#define FCC_PSMR_LPB	((uint)0x10000000)	/* Local protect. 1 = FDX */
-#define FCC_PSMR_LCW	((uint)0x08000000)	/* Late collision select */
-#define FCC_PSMR_FDE	((uint)0x04000000)	/* Full Duplex Enable */
-#define FCC_PSMR_MON	((uint)0x02000000)	/* RMON Enable */
-#define FCC_PSMR_PRO	((uint)0x00400000)	/* Promiscuous Enable */
-#define FCC_PSMR_FCE	((uint)0x00200000)	/* Flow Control Enable */
-#define FCC_PSMR_RSH	((uint)0x00100000)	/* Receive Short Frames */
-#define FCC_PSMR_CAM	((uint)0x00000400)	/* CAM enable */
-#define FCC_PSMR_BRO	((uint)0x00000200)	/* Broadcast pkt discard */
-#define FCC_PSMR_ENCRC	((uint)0x00000080)	/* Use 32-bit CRC */
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
-	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
-	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
-	u_char	iic_rfcr;	/* Rx function code */
-	u_char	iic_tfcr;	/* Tx function code */
-	ushort	iic_mrblr;	/* Max receive buffer length */
-	uint	iic_rstate;	/* Internal */
-	uint	iic_rdp;	/* Internal */
-	ushort	iic_rbptr;	/* Internal */
-	ushort	iic_rbc;	/* Internal */
-	uint	iic_rxtmp;	/* Internal */
-	uint	iic_tstate;	/* Internal */
-	uint	iic_tdp;	/* Internal */
-	ushort	iic_tbptr;	/* Internal */
-	ushort	iic_tbc;	/* Internal */
-	uint	iic_txtmp;	/* Internal */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
-	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
-	u_char	spi_rfcr;	/* Rx function code */
-	u_char	spi_tfcr;	/* Tx function code */
-	ushort	spi_mrblr;	/* Max receive buffer length */
-	uint	spi_rstate;	/* Internal */
-	uint	spi_rdp;	/* Internal */
-	ushort	spi_rbptr;	/* Internal */
-	ushort	spi_rbc;	/* Internal */
-	uint	spi_rxtmp;	/* Internal */
-	uint	spi_tstate;	/* Internal */
-	uint	spi_tdp;	/* Internal */
-	ushort	spi_tbptr;	/* Internal */
-	ushort	spi_tbc;	/* Internal */
-	uint	spi_txtmp;	/* Internal */
-	uint	spi_res;	/* Tx temp. */
-	uint	spi_res1[4];	/* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
-#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
-#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
-#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
-#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
-#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
-#define SPMODE_EN	((ushort)0x0100)	/* Enable */
-#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
-#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
-
-#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x)	((x) &0xF)
-
-#define SPI_EB		((u_char)0x10)		/* big endian byte order */
-
-/* IDMA parameter RAM
-*/
-typedef struct idma {
-	ushort ibase;		/* IDMA buffer descriptor table base address */
-	ushort dcm;		/* DMA channel mode */
-	ushort ibdptr;		/* IDMA current buffer descriptor pointer */
-	ushort dpr_buf;		/* IDMA transfer buffer base address */
-	ushort buf_inv;		/* internal buffer inventory */
-	ushort ss_max;		/* steady-state maximum transfer size */
-	ushort dpr_in_ptr;	/* write pointer inside the internal buffer */
-	ushort sts;		/* source transfer size */
-	ushort dpr_out_ptr;	/* read pointer inside the internal buffer */
-	ushort seob;		/* source end of burst */
-	ushort deob;		/* destination end of burst */
-	ushort dts;		/* destination transfer size */
-	ushort ret_add;		/* return address when working in ERM=1 mode */
-	ushort res0;		/* reserved */
-	uint   bd_cnt;		/* internal byte count */
-	uint   s_ptr;		/* source internal data pointer */
-	uint   d_ptr;		/* destination internal data pointer */
-	uint   istate;		/* internal state */
-	u_char res1[20];	/* pad to 64-byte length */
-} idma_t;
-
-/* DMA channel mode bit fields
-*/
-#define IDMA_DCM_FB		((ushort)0x8000) /* fly-by mode */
-#define IDMA_DCM_LP		((ushort)0x4000) /* low priority */
-#define IDMA_DCM_TC2		((ushort)0x0400) /* value driven on TC[2] */
-#define IDMA_DCM_DMA_WRAP_MASK	((ushort)0x01c0) /* mask for DMA wrap */
-#define IDMA_DCM_DMA_WRAP_64	((ushort)0x0000) /* 64-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_128	((ushort)0x0040) /* 128-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_256	((ushort)0x0080) /* 256-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_512	((ushort)0x00c0) /* 512-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_1024	((ushort)0x0100) /* 1024-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_2048	((ushort)0x0140) /* 2048-byte DMA xfer buffer */
-#define IDMA_DCM_SINC		((ushort)0x0020) /* source inc addr */
-#define IDMA_DCM_DINC		((ushort)0x0010) /* destination inc addr */
-#define IDMA_DCM_ERM		((ushort)0x0008) /* external request mode */
-#define IDMA_DCM_DT		((ushort)0x0004) /* DONE treatment */
-#define IDMA_DCM_SD_MASK	((ushort)0x0003) /* mask for SD bit field */
-#define IDMA_DCM_SD_MEM2MEM	((ushort)0x0000) /* memory-to-memory xfer */
-#define IDMA_DCM_SD_PER2MEM	((ushort)0x0002) /* peripheral-to-memory xfer */
-#define IDMA_DCM_SD_MEM2PER	((ushort)0x0001) /* memory-to-peripheral xfer */
-
-/* IDMA Buffer Descriptors
-*/
-typedef struct idma_bd {
-	uint flags;
-	uint len;	/* data length */
-	uint src;	/* source data buffer pointer */
-	uint dst;	/* destination data buffer pointer */
-} idma_bd_t;
-
-/* IDMA buffer descriptor flag bit fields
-*/
-#define IDMA_BD_V	((uint)0x80000000)	/* valid */
-#define IDMA_BD_W	((uint)0x20000000)	/* wrap */
-#define IDMA_BD_I	((uint)0x10000000)	/* interrupt */
-#define IDMA_BD_L	((uint)0x08000000)	/* last */
-#define IDMA_BD_CM	((uint)0x02000000)	/* continuous mode */
-#define IDMA_BD_SDN	((uint)0x00400000)	/* source done */
-#define IDMA_BD_DDN	((uint)0x00200000)	/* destination done */
-#define IDMA_BD_DGBL	((uint)0x00100000)	/* destination global */
-#define IDMA_BD_DBO_LE	((uint)0x00040000)	/* little-end dest byte order */
-#define IDMA_BD_DBO_BE	((uint)0x00080000)	/* big-end dest byte order */
-#define IDMA_BD_DDTB	((uint)0x00010000)	/* destination data bus */
-#define IDMA_BD_SGBL	((uint)0x00002000)	/* source global */
-#define IDMA_BD_SBO_LE	((uint)0x00000800)	/* little-end src byte order */
-#define IDMA_BD_SBO_BE	((uint)0x00001000)	/* big-end src byte order */
-#define IDMA_BD_SDTB	((uint)0x00000200)	/* source data bus */
-
-/* per-channel IDMA registers
-*/
-typedef struct im_idma {
-	u_char idsr;			/* IDMAn event status register */
-	u_char res0[3];
-	u_char idmr;			/* IDMAn event mask register */
-	u_char res1[3];
-} im_idma_t;
-
-/* IDMA event register bit fields
-*/
-#define IDMA_EVENT_SC	((unsigned char)0x08)	/* stop completed */
-#define IDMA_EVENT_OB	((unsigned char)0x04)	/* out of buffers */
-#define IDMA_EVENT_EDN	((unsigned char)0x02)	/* external DONE asserted */
-#define IDMA_EVENT_BC	((unsigned char)0x01)	/* buffer descriptor complete */
-
-/* RISC Controller Configuration Register (RCCR) bit fields
-*/
-#define RCCR_TIME	((uint)0x80000000) /* timer enable */
-#define RCCR_TIMEP_MASK	((uint)0x3f000000) /* mask for timer period bit field */
-#define RCCR_DR0M	((uint)0x00800000) /* IDMA0 request mode */
-#define RCCR_DR1M	((uint)0x00400000) /* IDMA1 request mode */
-#define RCCR_DR2M	((uint)0x00000080) /* IDMA2 request mode */
-#define RCCR_DR3M	((uint)0x00000040) /* IDMA3 request mode */
-#define RCCR_DR0QP_MASK	((uint)0x00300000) /* mask for IDMA0 req priority */
-#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
-#define RCCR_DR0QP_MED	((uint)0x00100000) /* IDMA0 has medium req priority */
-#define RCCR_DR0QP_LOW	((uint)0x00200000) /* IDMA0 has low req priority */
-#define RCCR_DR1QP_MASK	((uint)0x00030000) /* mask for IDMA1 req priority */
-#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
-#define RCCR_DR1QP_MED	((uint)0x00010000) /* IDMA1 has medium req priority */
-#define RCCR_DR1QP_LOW	((uint)0x00020000) /* IDMA1 has low req priority */
-#define RCCR_DR2QP_MASK	((uint)0x00000030) /* mask for IDMA2 req priority */
-#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
-#define RCCR_DR2QP_MED	((uint)0x00000010) /* IDMA2 has medium req priority */
-#define RCCR_DR2QP_LOW	((uint)0x00000020) /* IDMA2 has low req priority */
-#define RCCR_DR3QP_MASK	((uint)0x00000003) /* mask for IDMA3 req priority */
-#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
-#define RCCR_DR3QP_MED	((uint)0x00000001) /* IDMA3 has medium req priority */
-#define RCCR_DR3QP_LOW	((uint)0x00000002) /* IDMA3 has low req priority */
-#define RCCR_EIE	((uint)0x00080000) /* external interrupt enable */
-#define RCCR_SCD	((uint)0x00040000) /* scheduler configuration */
-#define RCCR_ERAM_MASK	((uint)0x0000e000) /* mask for enable RAM microcode */
-#define RCCR_ERAM_0KB	((uint)0x00000000) /* use 0KB of dpram for microcode */
-#define RCCR_ERAM_2KB	((uint)0x00002000) /* use 2KB of dpram for microcode */
-#define RCCR_ERAM_4KB	((uint)0x00004000) /* use 4KB of dpram for microcode */
-#define RCCR_ERAM_6KB	((uint)0x00006000) /* use 6KB of dpram for microcode */
-#define RCCR_ERAM_8KB	((uint)0x00008000) /* use 8KB of dpram for microcode */
-#define RCCR_ERAM_10KB	((uint)0x0000a000) /* use 10KB of dpram for microcode */
-#define RCCR_ERAM_12KB	((uint)0x0000c000) /* use 12KB of dpram for microcode */
-#define RCCR_EDM0	((uint)0x00000800) /* DREQ0 edge detect mode */
-#define RCCR_EDM1	((uint)0x00000400) /* DREQ1 edge detect mode */
-#define RCCR_EDM2	((uint)0x00000200) /* DREQ2 edge detect mode */
-#define RCCR_EDM3	((uint)0x00000100) /* DREQ3 edge detect mode */
-#define RCCR_DEM01	((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
-#define RCCR_DEM23	((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
-
-/*-----------------------------------------------------------------------
- * CMXFCR - CMX FCC Clock Route Register
- */
-#define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
-#define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
-#define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
-#define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
-#define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
-#define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
-#define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
-#define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
-#define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
-
-#define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
-#define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
-#define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
-#define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
-#define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
-#define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
-#define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
-#define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
-#define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
-#define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
-#define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
-#define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
-#define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
-#define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
-#define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
-#define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
-#define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
-#define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
-#define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
-#define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
-#define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
-#define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
-#define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
-#define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
-#define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
-#define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
-#define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
-#define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
-#define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
-#define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
-#define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
-#define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
-#define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
-#define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
-#define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
-#define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
-
-#define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
-#define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
-#define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
-#define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
-#define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
-#define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
-#define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
-#define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
-
-/*-----------------------------------------------------------------------
- * CMXSCR - CMX SCC Clock Route Register
- */
-#define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
-#define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
-#define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
-#define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
-#define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
-#define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
-#define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
-#define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
-#define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
-#define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
-#define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
-#define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
-#define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
-#define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
-#define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
-#define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
-
-#define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
-#define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
-#define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
-#define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
-#define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
-#define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
-#define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
-#define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
-#define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
-#define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
-#define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
-#define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
-#define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
-#define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
-#define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
-#define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
-#define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
-#define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
-#define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
-#define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
-#define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
-#define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
-#define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
-#define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
-#define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
-#define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
-#define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
-#define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
-#define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
-#define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
-#define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
-#define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
-#define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
-#define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
-#define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
-#define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
-#define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
-#define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
-#define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
-#define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
-#define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
-#define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
-#define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
-
-#define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
-#define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
-#define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
-#define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
-#define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
-#define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
-#define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
-#define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
-#define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
-#define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
-#define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
-#define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
-#define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
-#define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
-#define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration Register				 4-31
- */
-#define SIUMCR_BBD	0x80000000	/* Bus Busy Disable		*/
-#define SIUMCR_ESE	0x40000000	/* External Snoop Enable	*/
-#define SIUMCR_PBSE	0x20000000	/* Parity Byte Select Enable	*/
-#define SIUMCR_CDIS	0x10000000	/* Core Disable			*/
-#define SIUMCR_DPPC00	0x00000000	/* Data Parity Pins Configuration*/
-#define SIUMCR_DPPC01	0x04000000	/* - " -			*/
-#define SIUMCR_DPPC10	0x08000000	/* - " -			*/
-#define SIUMCR_DPPC11	0x0c000000	/* - " -			*/
-#define SIUMCR_L2CPC00	0x00000000	/* L2 Cache Pins Configuration	*/
-#define SIUMCR_L2CPC01	0x01000000	/* - " -			*/
-#define SIUMCR_L2CPC10	0x02000000	/* - " -			*/
-#define SIUMCR_L2CPC11	0x03000000	/* - " -			*/
-#define SIUMCR_LBPC00	0x00000000	/* Local Bus Pins Configuration	*/
-#define SIUMCR_LBPC01	0x00400000	/* - " -			*/
-#define SIUMCR_LBPC10	0x00800000	/* - " -			*/
-#define SIUMCR_LBPC11	0x00c00000	/* - " -			*/
-#define SIUMCR_APPC00	0x00000000	/* Address Parity Pins Configuration*/
-#define SIUMCR_APPC01	0x00100000	/* - " -			*/
-#define SIUMCR_APPC10	0x00200000	/* - " -			*/
-#define SIUMCR_APPC11	0x00300000	/* - " -			*/
-#define SIUMCR_CS10PC00	0x00000000	/* CS10 Pin Configuration	*/
-#define SIUMCR_CS10PC01	0x00040000	/* - " -			*/
-#define SIUMCR_CS10PC10	0x00080000	/* - " -			*/
-#define SIUMCR_CS10PC11	0x000c0000	/* - " -			*/
-#define SIUMCR_BCTLC00	0x00000000	/* Buffer Control Configuration	*/
-#define SIUMCR_BCTLC01	0x00010000	/* - " -			*/
-#define SIUMCR_BCTLC10	0x00020000	/* - " -			*/
-#define SIUMCR_BCTLC11	0x00030000	/* - " -			*/
-#define SIUMCR_MMR00	0x00000000	/* Mask Masters Requests	*/
-#define SIUMCR_MMR01	0x00004000	/* - " -			*/
-#define SIUMCR_MMR10	0x00008000	/* - " -			*/
-#define SIUMCR_MMR11	0x0000c000	/* - " -			*/
-#define SIUMCR_LPBSE	0x00002000	/* LocalBus Parity Byte Select Enable*/
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control Register					 9-8
-*/
-#define SCCR_PCI_MODE	0x00000100	/* PCI Mode	*/
-#define SCCR_PCI_MODCK	0x00000080	/* Value of PCI_MODCK pin	*/
-#define SCCR_PCIDF_MSK	0x00000078	/* PCI division factor	*/
-#define SCCR_PCIDF_SHIFT 3
-
-#ifndef CPM_IMMR_OFFSET
-#define CPM_IMMR_OFFSET	0x101a8
-#endif
-
-#define FCC_PSMR_RMII	((uint)0x00020000)	/* Use RMII interface */
-
-/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
- * in order to use clock-computing stuff below for the FCC x
- */
-
-/* Automatically generates register configurations */
-#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK	((uint)0xff000000)
-
-#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK	((uint)0x00ff0000)
-
-#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK	((uint)0x0000ff00)
-
-#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
-#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
-
-#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
-
-/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL		0x00000001U
-#define PA1_CRS		0x00000002U
-#define PA1_TXER	0x00000004U
-#define PA1_TXEN	0x00000008U
-#define PA1_RXDV	0x00000010U
-#define PA1_RXER	0x00000020U
-#define PA1_TXDAT	0x00003c00U
-#define PA1_RXDAT	0x0003c000U
-#define PA1_PSORA0	(PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA1	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
-		PA1_RXDV | PA1_RXER)
-#define PA1_DIRA0	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA1	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER	0x00000001U
-#define PB2_RXDV	0x00000002U
-#define PB2_TXEN	0x00000004U
-#define PB2_RXER	0x00000008U
-#define PB2_COL		0x00000010U
-#define PB2_CRS		0x00000020U
-#define PB2_TXDAT	0x000003c0U
-#define PB2_RXDAT	0x00003c00U
-#define PB2_PSORB0	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
-		PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB1	(PB2_TXEN)
-#define PB2_DIRB0	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB1	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV	0x00004000U
-#define PB3_RXER	0x00008000U
-#define PB3_TXER	0x00010000U
-#define PB3_TXEN	0x00020000U
-#define PB3_COL		0x00040000U
-#define PB3_CRS		0x00080000U
-#define PB3_TXDAT	0x0f000000U
-#define PC3_TXDAT	0x00000010U
-#define PB3_RXDAT	0x00f00000U
-#define PB3_PSORB0	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
-		PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB1	0
-#define PB3_DIRB0	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB1	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
-#define PC3_DIRC1	(PC3_TXDAT)
-
-/* Handy macro to specify mem for FCCs*/
-#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
-#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
-#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
-#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
-
-/* Clocks and GRG's */
-
-enum cpm_clk_dir {
-	CPM_CLK_RX,
-	CPM_CLK_TX,
-	CPM_CLK_RTX
-};
-
-enum cpm_clk_target {
-	CPM_CLK_SCC1,
-	CPM_CLK_SCC2,
-	CPM_CLK_SCC3,
-	CPM_CLK_SCC4,
-	CPM_CLK_FCC1,
-	CPM_CLK_FCC2,
-	CPM_CLK_FCC3,
-	CPM_CLK_SMC1,
-	CPM_CLK_SMC2,
-};
-
-enum cpm_clk {
-	CPM_CLK_NONE = 0,
-	CPM_BRG1,	/* Baud Rate Generator  1 */
-	CPM_BRG2,	/* Baud Rate Generator  2 */
-	CPM_BRG3,	/* Baud Rate Generator  3 */
-	CPM_BRG4,	/* Baud Rate Generator  4 */
-	CPM_BRG5,	/* Baud Rate Generator  5 */
-	CPM_BRG6,	/* Baud Rate Generator  6 */
-	CPM_BRG7,	/* Baud Rate Generator  7 */
-	CPM_BRG8,	/* Baud Rate Generator  8 */
-	CPM_CLK1,	/* Clock  1 */
-	CPM_CLK2,	/* Clock  2 */
-	CPM_CLK3,	/* Clock  3 */
-	CPM_CLK4,	/* Clock  4 */
-	CPM_CLK5,	/* Clock  5 */
-	CPM_CLK6,	/* Clock  6 */
-	CPM_CLK7,	/* Clock  7 */
-	CPM_CLK8,	/* Clock  8 */
-	CPM_CLK9,	/* Clock  9 */
-	CPM_CLK10,	/* Clock 10 */
-	CPM_CLK11,	/* Clock 11 */
-	CPM_CLK12,	/* Clock 12 */
-	CPM_CLK13,	/* Clock 13 */
-	CPM_CLK14,	/* Clock 14 */
-	CPM_CLK15,	/* Clock 15 */
-	CPM_CLK16,	/* Clock 16 */
-	CPM_CLK17,	/* Clock 17 */
-	CPM_CLK18,	/* Clock 18 */
-	CPM_CLK19,	/* Clock 19 */
-	CPM_CLK20,	/* Clock 20 */
-	CPM_CLK_DUMMY
-};
-
-extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
-extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
-
-#define CPM_PIN_INPUT     0
-#define CPM_PIN_OUTPUT    1
-#define CPM_PIN_PRIMARY   0
-#define CPM_PIN_SECONDARY 2
-#define CPM_PIN_GPIO      4
-#define CPM_PIN_OPENDRAIN 8
-
-void cpm2_set_pin(int port, int pin, int flags);
-
-#endif /* __CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
deleted file mode 100644
index 2a3e9075a5a0..000000000000
--- a/include/asm-powerpc/cputable.h
+++ /dev/null
@@ -1,512 +0,0 @@
-#ifndef __ASM_POWERPC_CPUTABLE_H
-#define __ASM_POWERPC_CPUTABLE_H
-
-#define PPC_FEATURE_32			0x80000000
-#define PPC_FEATURE_64			0x40000000
-#define PPC_FEATURE_601_INSTR		0x20000000
-#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
-#define PPC_FEATURE_HAS_FPU		0x08000000
-#define PPC_FEATURE_HAS_MMU		0x04000000
-#define PPC_FEATURE_HAS_4xxMAC		0x02000000
-#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
-#define PPC_FEATURE_HAS_SPE		0x00800000
-#define PPC_FEATURE_HAS_EFP_SINGLE	0x00400000
-#define PPC_FEATURE_HAS_EFP_DOUBLE	0x00200000
-#define PPC_FEATURE_NO_TB		0x00100000
-#define PPC_FEATURE_POWER4		0x00080000
-#define PPC_FEATURE_POWER5		0x00040000
-#define PPC_FEATURE_POWER5_PLUS		0x00020000
-#define PPC_FEATURE_CELL		0x00010000
-#define PPC_FEATURE_BOOKE		0x00008000
-#define PPC_FEATURE_SMT			0x00004000
-#define PPC_FEATURE_ICACHE_SNOOP	0x00002000
-#define PPC_FEATURE_ARCH_2_05		0x00001000
-#define PPC_FEATURE_PA6T		0x00000800
-#define PPC_FEATURE_HAS_DFP		0x00000400
-#define PPC_FEATURE_POWER6_EXT		0x00000200
-#define PPC_FEATURE_ARCH_2_06		0x00000100
-#define PPC_FEATURE_HAS_VSX		0x00000080
-
-#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
-					0x00000040
-
-#define PPC_FEATURE_TRUE_LE		0x00000002
-#define PPC_FEATURE_PPC_LE		0x00000001
-
-#ifdef __KERNEL__
-
-#include <asm/asm-compat.h>
-#include <asm/feature-fixups.h>
-
-#ifndef __ASSEMBLY__
-
-/* This structure can grow, it's real size is used by head.S code
- * via the mkdefs mechanism.
- */
-struct cpu_spec;
-
-typedef	void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
-typedef	void (*cpu_restore_t)(void);
-
-enum powerpc_oprofile_type {
-	PPC_OPROFILE_INVALID = 0,
-	PPC_OPROFILE_RS64 = 1,
-	PPC_OPROFILE_POWER4 = 2,
-	PPC_OPROFILE_G4 = 3,
-	PPC_OPROFILE_FSL_EMB = 4,
-	PPC_OPROFILE_CELL = 5,
-	PPC_OPROFILE_PA6T = 6,
-};
-
-enum powerpc_pmc_type {
-	PPC_PMC_DEFAULT = 0,
-	PPC_PMC_IBM = 1,
-	PPC_PMC_PA6T = 2,
-};
-
-struct pt_regs;
-
-extern int machine_check_generic(struct pt_regs *regs);
-extern int machine_check_4xx(struct pt_regs *regs);
-extern int machine_check_440A(struct pt_regs *regs);
-extern int machine_check_e500(struct pt_regs *regs);
-extern int machine_check_e200(struct pt_regs *regs);
-
-/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
-struct cpu_spec {
-	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
-	unsigned int	pvr_mask;
-	unsigned int	pvr_value;
-
-	char		*cpu_name;
-	unsigned long	cpu_features;		/* Kernel features */
-	unsigned int	cpu_user_features;	/* Userland features */
-
-	/* cache line sizes */
-	unsigned int	icache_bsize;
-	unsigned int	dcache_bsize;
-
-	/* number of performance monitor counters */
-	unsigned int	num_pmcs;
-	enum powerpc_pmc_type pmc_type;
-
-	/* this is called to initialize various CPU bits like L1 cache,
-	 * BHT, SPD, etc... from head.S before branching to identify_machine
-	 */
-	cpu_setup_t	cpu_setup;
-	/* Used to restore cpu setup on secondary processors and at resume */
-	cpu_restore_t	cpu_restore;
-
-	/* Used by oprofile userspace to select the right counters */
-	char		*oprofile_cpu_type;
-
-	/* Processor specific oprofile operations */
-	enum powerpc_oprofile_type oprofile_type;
-
-	/* Bit locations inside the mmcra change */
-	unsigned long	oprofile_mmcra_sihv;
-	unsigned long	oprofile_mmcra_sipr;
-
-	/* Bits to clear during an oprofile exception */
-	unsigned long	oprofile_mmcra_clear;
-
-	/* Name of processor class, for the ELF AT_PLATFORM entry */
-	char		*platform;
-
-	/* Processor specific machine check handling. Return negative
-	 * if the error is fatal, 1 if it was fully recovered and 0 to
-	 * pass up (not CPU originated) */
-	int		(*machine_check)(struct pt_regs *regs);
-};
-
-extern struct cpu_spec		*cur_cpu_spec;
-
-extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
-
-extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
-extern void do_feature_fixups(unsigned long value, void *fixup_start,
-			      void *fixup_end);
-
-#endif /* __ASSEMBLY__ */
-
-/* CPU kernel features */
-
-/* Retain the 32b definitions all use bottom half of word */
-#define CPU_FTR_COHERENT_ICACHE		ASM_CONST(0x0000000000000001)
-#define CPU_FTR_L2CR			ASM_CONST(0x0000000000000002)
-#define CPU_FTR_SPEC7450		ASM_CONST(0x0000000000000004)
-#define CPU_FTR_ALTIVEC			ASM_CONST(0x0000000000000008)
-#define CPU_FTR_TAU			ASM_CONST(0x0000000000000010)
-#define CPU_FTR_CAN_DOZE		ASM_CONST(0x0000000000000020)
-#define CPU_FTR_USE_TB			ASM_CONST(0x0000000000000040)
-#define CPU_FTR_L2CSR			ASM_CONST(0x0000000000000080)
-#define CPU_FTR_601			ASM_CONST(0x0000000000000100)
-#define CPU_FTR_HPTE_TABLE		ASM_CONST(0x0000000000000200)
-#define CPU_FTR_CAN_NAP			ASM_CONST(0x0000000000000400)
-#define CPU_FTR_L3CR			ASM_CONST(0x0000000000000800)
-#define CPU_FTR_L3_DISABLE_NAP		ASM_CONST(0x0000000000001000)
-#define CPU_FTR_NAP_DISABLE_L2_PR	ASM_CONST(0x0000000000002000)
-#define CPU_FTR_DUAL_PLL_750FX		ASM_CONST(0x0000000000004000)
-#define CPU_FTR_NO_DPM			ASM_CONST(0x0000000000008000)
-#define CPU_FTR_HAS_HIGH_BATS		ASM_CONST(0x0000000000010000)
-#define CPU_FTR_NEED_COHERENT		ASM_CONST(0x0000000000020000)
-#define CPU_FTR_NO_BTIC			ASM_CONST(0x0000000000040000)
-#define CPU_FTR_BIG_PHYS		ASM_CONST(0x0000000000080000)
-#define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
-#define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
-#define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
-#define CPU_FTR_FPU_UNAVAILABLE		ASM_CONST(0x0000000000800000)
-#define CPU_FTR_UNIFIED_ID_CACHE	ASM_CONST(0x0000000001000000)
-#define CPU_FTR_SPE			ASM_CONST(0x0000000002000000)
-#define CPU_FTR_NEED_PAIRED_STWCX	ASM_CONST(0x0000000004000000)
-#define CPU_FTR_LWSYNC			ASM_CONST(0x0000000008000000)
-
-/*
- * Add the 64-bit processor unique features in the top half of the word;
- * on 32-bit, make the names available but defined to be 0.
- */
-#ifdef __powerpc64__
-#define LONG_ASM_CONST(x)		ASM_CONST(x)
-#else
-#define LONG_ASM_CONST(x)		0
-#endif
-
-#define CPU_FTR_SLB			LONG_ASM_CONST(0x0000000100000000)
-#define CPU_FTR_16M_PAGE		LONG_ASM_CONST(0x0000000200000000)
-#define CPU_FTR_TLBIEL			LONG_ASM_CONST(0x0000000400000000)
-#define CPU_FTR_NOEXECUTE		LONG_ASM_CONST(0x0000000800000000)
-#define CPU_FTR_IABR			LONG_ASM_CONST(0x0000002000000000)
-#define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000004000000000)
-#define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000008000000000)
-#define CPU_FTR_SMT			LONG_ASM_CONST(0x0000010000000000)
-#define CPU_FTR_LOCKLESS_TLBIE		LONG_ASM_CONST(0x0000040000000000)
-#define CPU_FTR_CI_LARGE_PAGE		LONG_ASM_CONST(0x0000100000000000)
-#define CPU_FTR_PAUSE_ZERO		LONG_ASM_CONST(0x0000200000000000)
-#define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
-#define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
-#define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
-#define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
-#define CPU_FTR_1T_SEGMENT		LONG_ASM_CONST(0x0004000000000000)
-#define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
-#define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
-#define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
-
-#ifndef __ASSEMBLY__
-
-#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_SLB | \
-				 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
-				 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
-
-/* We only set the altivec features if the kernel was compiled with altivec
- * support
- */
-#ifdef CONFIG_ALTIVEC
-#define CPU_FTR_ALTIVEC_COMP	CPU_FTR_ALTIVEC
-#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC
-#else
-#define CPU_FTR_ALTIVEC_COMP	0
-#define PPC_FEATURE_HAS_ALTIVEC_COMP    0
-#endif
-
-/* We only set the VSX features if the kernel was compiled with VSX
- * support
- */
-#ifdef CONFIG_VSX
-#define CPU_FTR_VSX_COMP	CPU_FTR_VSX
-#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX
-#else
-#define CPU_FTR_VSX_COMP	0
-#define PPC_FEATURE_HAS_VSX_COMP    0
-#endif
-
-/* We only set the spe features if the kernel was compiled with spe
- * support
- */
-#ifdef CONFIG_SPE
-#define CPU_FTR_SPE_COMP	CPU_FTR_SPE
-#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE
-#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE
-#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE
-#else
-#define CPU_FTR_SPE_COMP	0
-#define PPC_FEATURE_HAS_SPE_COMP    0
-#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0
-#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
-#endif
-
-/* We need to mark all pages as being coherent if we're SMP or we have a
- * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
- * require it for PCI "streaming/prefetch" to work properly.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
-	|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
-#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
-#else
-#define CPU_FTR_COMMON                  0
-#endif
-
-/* The powersave features NAP & DOZE seems to confuse BDI when
-   debugging. So if a BDI is used, disable theses
- */
-#ifndef CONFIG_BDI_SWITCH
-#define CPU_FTR_MAYBE_CAN_DOZE	CPU_FTR_CAN_DOZE
-#define CPU_FTR_MAYBE_CAN_NAP	CPU_FTR_CAN_NAP
-#else
-#define CPU_FTR_MAYBE_CAN_DOZE	0
-#define CPU_FTR_MAYBE_CAN_NAP	0
-#endif
-
-#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
-		     !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
-		     !defined(CONFIG_BOOKE))
-
-#define CPU_FTRS_PPC601	(CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \
-	CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
-#define CPU_FTRS_603	(CPU_FTR_COMMON | \
-	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_604	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
-#define CPU_FTRS_740_NOTAU	(CPU_FTR_COMMON | \
-	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_740	(CPU_FTR_COMMON | \
-	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
-	    CPU_FTR_PPC_LE)
-#define CPU_FTRS_750	(CPU_FTR_COMMON | \
-	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
-	    CPU_FTR_PPC_LE)
-#define CPU_FTRS_750CL	(CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS)
-#define CPU_FTRS_750FX1	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
-#define CPU_FTRS_750FX2	(CPU_FTRS_750 | CPU_FTR_NO_DPM)
-#define CPU_FTRS_750FX	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \
-		CPU_FTR_HAS_HIGH_BATS)
-#define CPU_FTRS_750GX	(CPU_FTRS_750FX)
-#define CPU_FTRS_7400_NOTAU	(CPU_FTR_COMMON | \
-	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7400	(CPU_FTR_COMMON | \
-	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
-	    CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7450_20	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7450_21	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7450_23	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7455_1	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
-	    CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7455_20	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE)
-#define CPU_FTRS_7455	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7447_10	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
-	    CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7447	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7447A	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_7448	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
-	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
-#define CPU_FTRS_82XX	(CPU_FTR_COMMON | \
-	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
-#define CPU_FTRS_G2_LE	(CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
-	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
-#define CPU_FTRS_E300	(CPU_FTR_MAYBE_CAN_DOZE | \
-	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_COMMON)
-#define CPU_FTRS_E300C2	(CPU_FTR_MAYBE_CAN_DOZE | \
-	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
-	    CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
-#define CPU_FTRS_CLASSIC32	(CPU_FTR_COMMON | \
-	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
-#define CPU_FTRS_8XX	(CPU_FTR_USE_TB)
-#define CPU_FTRS_40X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_44X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E200	(CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
-	    CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
-	    CPU_FTR_UNIFIED_ID_CACHE)
-#define CPU_FTRS_E500	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500_2	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
-	    CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500MC	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
-	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
-	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC)
-#define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
-
-/* 64-bit CPUs */
-#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
-#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
-	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
-#define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_MMCRA)
-#define CPU_FTRS_PPC970	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
-#define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-	    CPU_FTR_PURR)
-#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
-	    CPU_FTR_DSCR)
-#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
-	    CPU_FTR_DSCR | CPU_FTR_SAO)
-#define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
-#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
-#define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | \
-	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
-
-#ifdef __powerpc64__
-#define CPU_FTRS_POSSIBLE	\
-	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
-	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
-	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
-	    CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
-#else
-enum {
-	CPU_FTRS_POSSIBLE =
-#if CLASSIC_PPC
-	    CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
-	    CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
-	    CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX |
-	    CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 |
-	    CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
-	    CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
-	    CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
-	    CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
-	    CPU_FTRS_CLASSIC32 |
-#else
-	    CPU_FTRS_GENERIC_32 |
-#endif
-#ifdef CONFIG_8xx
-	    CPU_FTRS_8XX |
-#endif
-#ifdef CONFIG_40x
-	    CPU_FTRS_40X |
-#endif
-#ifdef CONFIG_44x
-	    CPU_FTRS_44X |
-#endif
-#ifdef CONFIG_E200
-	    CPU_FTRS_E200 |
-#endif
-#ifdef CONFIG_E500
-	    CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
-#endif
-	    0,
-};
-#endif /* __powerpc64__ */
-
-#ifdef __powerpc64__
-#define CPU_FTRS_ALWAYS		\
-	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\
-	    CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 &	\
-	    CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
-#else
-enum {
-	CPU_FTRS_ALWAYS =
-#if CLASSIC_PPC
-	    CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
-	    CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
-	    CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX &
-	    CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 &
-	    CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
-	    CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
-	    CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
-	    CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
-	    CPU_FTRS_CLASSIC32 &
-#else
-	    CPU_FTRS_GENERIC_32 &
-#endif
-#ifdef CONFIG_8xx
-	    CPU_FTRS_8XX &
-#endif
-#ifdef CONFIG_40x
-	    CPU_FTRS_40X &
-#endif
-#ifdef CONFIG_44x
-	    CPU_FTRS_44X &
-#endif
-#ifdef CONFIG_E200
-	    CPU_FTRS_E200 &
-#endif
-#ifdef CONFIG_E500
-	    CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
-#endif
-	    CPU_FTRS_POSSIBLE,
-};
-#endif /* __powerpc64__ */
-
-static inline int cpu_has_feature(unsigned long feature)
-{
-	return (CPU_FTRS_ALWAYS & feature) ||
-	       (CPU_FTRS_POSSIBLE
-		& cur_cpu_spec->cpu_features
-		& feature);
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h
deleted file mode 100644
index fb11b0c459b8..000000000000
--- a/include/asm-powerpc/cputhreads.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _ASM_POWERPC_CPUTHREADS_H
-#define _ASM_POWERPC_CPUTHREADS_H
-
-#include <linux/cpumask.h>
-
-/*
- * Mapping of threads to cores
- */
-
-#ifdef CONFIG_SMP
-extern int threads_per_core;
-extern int threads_shift;
-extern cpumask_t threads_core_mask;
-#else
-#define threads_per_core	1
-#define threads_shift		0
-#define threads_core_mask	(CPU_MASK_CPU0)
-#endif
-
-/* cpu_thread_mask_to_cores - Return a cpumask of one per cores
- *                            hit by the argument
- *
- * @threads:	a cpumask of threads
- *
- * This function returns a cpumask which will have one "cpu" (or thread)
- * bit set for each core that has at least one thread set in the argument.
- *
- * This can typically be used for things like IPI for tlb invalidations
- * since those need to be done only once per core/TLB
- */
-static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
-{
-	cpumask_t	tmp, res;
-	int		i;
-
-	res = CPU_MASK_NONE;
-	for (i = 0; i < NR_CPUS; i += threads_per_core) {
-		cpus_shift_left(tmp, threads_core_mask, i);
-		if (cpus_intersects(threads, tmp))
-			cpu_set(i, res);
-	}
-	return res;
-}
-
-static inline int cpu_nr_cores(void)
-{
-	return NR_CPUS >> threads_shift;
-}
-
-static inline cpumask_t cpu_online_cores_map(void)
-{
-	return cpu_thread_mask_to_cores(cpu_online_map);
-}
-
-static inline int cpu_thread_to_core(int cpu)
-{
-	return cpu >> threads_shift;
-}
-
-static inline int cpu_thread_in_core(int cpu)
-{
-	return cpu & (threads_per_core - 1);
-}
-
-static inline int cpu_first_thread_in_core(int cpu)
-{
-	return cpu & ~(threads_per_core - 1);
-}
-
-#endif /* _ASM_POWERPC_CPUTHREADS_H */
-
diff --git a/include/asm-powerpc/cputime.h b/include/asm-powerpc/cputime.h
deleted file mode 100644
index f42e623030ee..000000000000
--- a/include/asm-powerpc/cputime.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Definitions for measuring cputime on powerpc machines.
- *
- * Copyright (C) 2006 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in
- * the same units as the timebase.  Otherwise we measure cpu time
- * in jiffies using the generic definitions.
- */
-
-#ifndef __POWERPC_CPUTIME_H
-#define __POWERPC_CPUTIME_H
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#include <asm-generic/cputime.h>
-#else
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <asm/div64.h>
-#include <asm/time.h>
-#include <asm/param.h>
-
-typedef u64 cputime_t;
-typedef u64 cputime64_t;
-
-#define cputime_zero			((cputime_t)0)
-#define cputime_max			((~((cputime_t)0) >> 1) - 1)
-#define cputime_add(__a, __b)		((__a) +  (__b))
-#define cputime_sub(__a, __b)		((__a) -  (__b))
-#define cputime_div(__a, __n)		((__a) /  (__n))
-#define cputime_halve(__a)		((__a) >> 1)
-#define cputime_eq(__a, __b)		((__a) == (__b))
-#define cputime_gt(__a, __b)		((__a) >  (__b))
-#define cputime_ge(__a, __b)		((__a) >= (__b))
-#define cputime_lt(__a, __b)		((__a) <  (__b))
-#define cputime_le(__a, __b)		((__a) <= (__b))
-
-#define cputime64_zero			((cputime64_t)0)
-#define cputime64_add(__a, __b)		((__a) + (__b))
-#define cputime64_sub(__a, __b)		((__a) - (__b))
-#define cputime_to_cputime64(__ct)	(__ct)
-
-#ifdef __KERNEL__
-
-/*
- * Convert cputime <-> jiffies
- */
-extern u64 __cputime_jiffies_factor;
-DECLARE_PER_CPU(unsigned long, cputime_last_delta);
-DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta);
-
-static inline unsigned long cputime_to_jiffies(const cputime_t ct)
-{
-	return mulhdu(ct, __cputime_jiffies_factor);
-}
-
-/* Estimate the scaled cputime by scaling the real cputime based on
- * the last scaled to real ratio */
-static inline cputime_t cputime_to_scaled(const cputime_t ct)
-{
-	if (cpu_has_feature(CPU_FTR_SPURR) &&
-	    per_cpu(cputime_last_delta, smp_processor_id()))
-		return ct *
-			per_cpu(cputime_scaled_last_delta, smp_processor_id())/
-			per_cpu(cputime_last_delta, smp_processor_id());
-	return ct;
-}
-
-static inline cputime_t jiffies_to_cputime(const unsigned long jif)
-{
-	cputime_t ct;
-	unsigned long sec;
-
-	/* have to be a little careful about overflow */
-	ct = jif % HZ;
-	sec = jif / HZ;
-	if (ct) {
-		ct *= tb_ticks_per_sec;
-		do_div(ct, HZ);
-	}
-	if (sec)
-		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
-}
-
-static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
-{
-	cputime_t ct;
-	u64 sec;
-
-	/* have to be a little careful about overflow */
-	ct = jif % HZ;
-	sec = jif / HZ;
-	if (ct) {
-		ct *= tb_ticks_per_sec;
-		do_div(ct, HZ);
-	}
-	if (sec)
-		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
-}
-
-static inline u64 cputime64_to_jiffies64(const cputime_t ct)
-{
-	return mulhdu(ct, __cputime_jiffies_factor);
-}
-
-/*
- * Convert cputime <-> milliseconds
- */
-extern u64 __cputime_msec_factor;
-
-static inline unsigned long cputime_to_msecs(const cputime_t ct)
-{
-	return mulhdu(ct, __cputime_msec_factor);
-}
-
-static inline cputime_t msecs_to_cputime(const unsigned long ms)
-{
-	cputime_t ct;
-	unsigned long sec;
-
-	/* have to be a little careful about overflow */
-	ct = ms % 1000;
-	sec = ms / 1000;
-	if (ct) {
-		ct *= tb_ticks_per_sec;
-		do_div(ct, 1000);
-	}
-	if (sec)
-		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
-}
-
-/*
- * Convert cputime <-> seconds
- */
-extern u64 __cputime_sec_factor;
-
-static inline unsigned long cputime_to_secs(const cputime_t ct)
-{
-	return mulhdu(ct, __cputime_sec_factor);
-}
-
-static inline cputime_t secs_to_cputime(const unsigned long sec)
-{
-	return (cputime_t) sec * tb_ticks_per_sec;
-}
-
-/*
- * Convert cputime <-> timespec
- */
-static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
-{
-	u64 x = ct;
-	unsigned int frac;
-
-	frac = do_div(x, tb_ticks_per_sec);
-	p->tv_sec = x;
-	x = (u64) frac * 1000000000;
-	do_div(x, tb_ticks_per_sec);
-	p->tv_nsec = x;
-}
-
-static inline cputime_t timespec_to_cputime(const struct timespec *p)
-{
-	cputime_t ct;
-
-	ct = (u64) p->tv_nsec * tb_ticks_per_sec;
-	do_div(ct, 1000000000);
-	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
-}
-
-/*
- * Convert cputime <-> timeval
- */
-static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
-{
-	u64 x = ct;
-	unsigned int frac;
-
-	frac = do_div(x, tb_ticks_per_sec);
-	p->tv_sec = x;
-	x = (u64) frac * 1000000;
-	do_div(x, tb_ticks_per_sec);
-	p->tv_usec = x;
-}
-
-static inline cputime_t timeval_to_cputime(const struct timeval *p)
-{
-	cputime_t ct;
-
-	ct = (u64) p->tv_usec * tb_ticks_per_sec;
-	do_div(ct, 1000000);
-	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
-}
-
-/*
- * Convert cputime <-> clock_t (units of 1/USER_HZ seconds)
- */
-extern u64 __cputime_clockt_factor;
-
-static inline unsigned long cputime_to_clock_t(const cputime_t ct)
-{
-	return mulhdu(ct, __cputime_clockt_factor);
-}
-
-static inline cputime_t clock_t_to_cputime(const unsigned long clk)
-{
-	cputime_t ct;
-	unsigned long sec;
-
-	/* have to be a little careful about overflow */
-	ct = clk % USER_HZ;
-	sec = clk / USER_HZ;
-	if (ct) {
-		ct *= tb_ticks_per_sec;
-		do_div(ct, USER_HZ);
-	}
-	if (sec)
-		ct += (cputime_t) sec * tb_ticks_per_sec;
-	return ct;
-}
-
-#define cputime64_to_clock_t(ct)	cputime_to_clock_t((cputime_t)(ct))
-
-#endif /* __KERNEL__ */
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
-#endif /* __POWERPC_CPUTIME_H */
diff --git a/include/asm-powerpc/current.h b/include/asm-powerpc/current.h
deleted file mode 100644
index e2c7f06931e7..000000000000
--- a/include/asm-powerpc/current.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_POWERPC_CURRENT_H
-#define _ASM_POWERPC_CURRENT_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-struct task_struct;
-
-#ifdef __powerpc64__
-#include <linux/stddef.h>
-#include <asm/paca.h>
-
-static inline struct task_struct *get_current(void)
-{
-	struct task_struct *task;
-
-	__asm__ __volatile__("ld %0,%1(13)"
-	: "=r" (task)
-	: "i" (offsetof(struct paca_struct, __current)));
-
-	return task;
-}
-#define current	get_current()
-
-#else
-
-/*
- * We keep `current' in r2 for speed.
- */
-register struct task_struct *current asm ("r2");
-
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_CURRENT_H */
diff --git a/include/asm-powerpc/dbdma.h b/include/asm-powerpc/dbdma.h
deleted file mode 100644
index e23f07e73cb3..000000000000
--- a/include/asm-powerpc/dbdma.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Definitions for using the Apple Descriptor-Based DMA controller
- * in Power Macintosh computers.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#ifdef __KERNEL__
-#ifndef _ASM_DBDMA_H_
-#define _ASM_DBDMA_H_
-/*
- * DBDMA control/status registers.  All little-endian.
- */
-struct dbdma_regs {
-    unsigned int control;	/* lets you change bits in status */
-    unsigned int status;	/* DMA and device status bits (see below) */
-    unsigned int cmdptr_hi;	/* upper 32 bits of command address */
-    unsigned int cmdptr;	/* (lower 32 bits of) command address (phys) */
-    unsigned int intr_sel;	/* select interrupt condition bit */
-    unsigned int br_sel;	/* select branch condition bit */
-    unsigned int wait_sel;	/* select wait condition bit */
-    unsigned int xfer_mode;
-    unsigned int data2ptr_hi;
-    unsigned int data2ptr;
-    unsigned int res1;
-    unsigned int address_hi;
-    unsigned int br_addr_hi;
-    unsigned int res2[3];
-};
-
-/* Bits in control and status registers */
-#define RUN	0x8000
-#define PAUSE	0x4000
-#define FLUSH	0x2000
-#define WAKE	0x1000
-#define DEAD	0x0800
-#define ACTIVE	0x0400
-#define BT	0x0100
-#define DEVSTAT	0x00ff
-
-/*
- * DBDMA command structure.  These fields are all little-endian!
- */
-struct dbdma_cmd {
-    unsigned short req_count;	/* requested byte transfer count */
-    unsigned short command;	/* command word (has bit-fields) */
-    unsigned int   phy_addr;	/* physical data address */
-    unsigned int   cmd_dep;	/* command-dependent field */
-    unsigned short res_count;	/* residual count after completion */
-    unsigned short xfer_status;	/* transfer status */
-};
-
-/* DBDMA command values in command field */
-#define OUTPUT_MORE	0	/* transfer memory data to stream */
-#define OUTPUT_LAST	0x1000	/* ditto followed by end marker */
-#define INPUT_MORE	0x2000	/* transfer stream data to memory */
-#define INPUT_LAST	0x3000	/* ditto, expect end marker */
-#define STORE_WORD	0x4000	/* write word (4 bytes) to device reg */
-#define LOAD_WORD	0x5000	/* read word (4 bytes) from device reg */
-#define DBDMA_NOP	0x6000	/* do nothing */
-#define DBDMA_STOP	0x7000	/* suspend processing */
-
-/* Key values in command field */
-#define KEY_STREAM0	0	/* usual data stream */
-#define KEY_STREAM1	0x100	/* control/status stream */
-#define KEY_STREAM2	0x200	/* device-dependent stream */
-#define KEY_STREAM3	0x300	/* device-dependent stream */
-#define KEY_REGS	0x500	/* device register space */
-#define KEY_SYSTEM	0x600	/* system memory-mapped space */
-#define KEY_DEVICE	0x700	/* device memory-mapped space */
-
-/* Interrupt control values in command field */
-#define INTR_NEVER	0	/* don't interrupt */
-#define INTR_IFSET	0x10	/* intr if condition bit is 1 */
-#define INTR_IFCLR	0x20	/* intr if condition bit is 0 */
-#define INTR_ALWAYS	0x30	/* always interrupt */
-
-/* Branch control values in command field */
-#define BR_NEVER	0	/* don't branch */
-#define BR_IFSET	0x4	/* branch if condition bit is 1 */
-#define BR_IFCLR	0x8	/* branch if condition bit is 0 */
-#define BR_ALWAYS	0xc	/* always branch */
-
-/* Wait control values in command field */
-#define WAIT_NEVER	0	/* don't wait */
-#define WAIT_IFSET	1	/* wait if condition bit is 1 */
-#define WAIT_IFCLR	2	/* wait if condition bit is 0 */
-#define WAIT_ALWAYS	3	/* always wait */
-
-/* Align an address for a DBDMA command structure */
-#define DBDMA_ALIGN(x)	(((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \
-			 & -sizeof(struct dbdma_cmd))
-
-/* Useful macros */
-#define DBDMA_DO_STOP(regs) do {				\
-	out_le32(&((regs)->control), (RUN|FLUSH)<<16);		\
-	while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH))	\
-		; \
-} while(0)
-
-#define DBDMA_DO_RESET(regs) do {				\
-	out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\
-	while(in_le32(&((regs)->status)) & (RUN)) \
-		; \
-} while(0)
-
-#endif /* _ASM_DBDMA_H_ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/dcr-generic.h b/include/asm-powerpc/dcr-generic.h
deleted file mode 100644
index 35b71599ec46..000000000000
--- a/include/asm-powerpc/dcr-generic.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_GENERIC_H
-#define _ASM_POWERPC_DCR_GENERIC_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID};
-
-typedef struct {
-	enum host_type_t type;
-	union {
-		dcr_host_mmio_t mmio;
-		dcr_host_native_t native;
-	} host;
-} dcr_host_t;
-
-extern bool dcr_map_ok_generic(dcr_host_t host);
-
-extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n,
-			  unsigned int dcr_c);
-extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
-
-extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
-
-extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_GENERIC_H */
-
-
diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h
deleted file mode 100644
index acd491dbd45a..000000000000
--- a/include/asm-powerpc/dcr-mmio.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_MMIO_H
-#define _ASM_POWERPC_DCR_MMIO_H
-#ifdef __KERNEL__
-
-#include <asm/io.h>
-
-typedef struct {
-	void __iomem *token;
-	unsigned int stride;
-	unsigned int base;
-} dcr_host_mmio_t;
-
-static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
-{
-	return host.token != NULL;
-}
-
-extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
-				    unsigned int dcr_n,
-				    unsigned int dcr_c);
-extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c);
-
-static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n)
-{
-	return in_be32(host.token + ((host.base + dcr_n) * host.stride));
-}
-
-static inline void dcr_write_mmio(dcr_host_mmio_t host,
-				  unsigned int dcr_n,
-				  u32 value)
-{
-	out_be32(host.token + ((host.base + dcr_n) * host.stride), value);
-}
-
-extern u64 of_translate_dcr_address(struct device_node *dev,
-				    unsigned int dcr_n,
-				    unsigned int *stride);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_MMIO_H */
-
-
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
deleted file mode 100644
index 72d2b72c7390..000000000000
--- a/include/asm-powerpc/dcr-native.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_NATIVE_H
-#define _ASM_POWERPC_DCR_NATIVE_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <linux/spinlock.h>
-
-typedef struct {
-	unsigned int base;
-} dcr_host_native_t;
-
-static inline bool dcr_map_ok_native(dcr_host_native_t host)
-{
-	return 1;
-}
-
-#define dcr_map_native(dev, dcr_n, dcr_c) \
-	((dcr_host_native_t){ .base = (dcr_n) })
-#define dcr_unmap_native(host, dcr_c)		do {} while (0)
-#define dcr_read_native(host, dcr_n)		mfdcr(dcr_n + host.base)
-#define dcr_write_native(host, dcr_n, value)	mtdcr(dcr_n + host.base, value)
-
-/* Device Control Registers */
-void __mtdcr(int reg, unsigned int val);
-unsigned int __mfdcr(int reg);
-#define mfdcr(rn)						\
-	({unsigned int rval;					\
-	if (__builtin_constant_p(rn))				\
-		asm volatile("mfdcr %0," __stringify(rn)	\
-		              : "=r" (rval));			\
-	else							\
-		rval = __mfdcr(rn);				\
-	rval;})
-
-#define mtdcr(rn, v)						\
-do {								\
-	if (__builtin_constant_p(rn))				\
-		asm volatile("mtdcr " __stringify(rn) ",%0"	\
-			      : : "r" (v)); 			\
-	else							\
-		__mtdcr(rn, v);					\
-} while (0)
-
-/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
-extern spinlock_t dcr_ind_lock;
-
-static inline unsigned __mfdcri(int base_addr, int base_data, int reg)
-{
-	unsigned long flags;
-	unsigned int val;
-
-	spin_lock_irqsave(&dcr_ind_lock, flags);
-	__mtdcr(base_addr, reg);
-	val = __mfdcr(base_data);
-	spin_unlock_irqrestore(&dcr_ind_lock, flags);
-	return val;
-}
-
-static inline void __mtdcri(int base_addr, int base_data, int reg,
-			    unsigned val)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dcr_ind_lock, flags);
-	__mtdcr(base_addr, reg);
-	__mtdcr(base_data, val);
-	spin_unlock_irqrestore(&dcr_ind_lock, flags);
-}
-
-static inline void __dcri_clrset(int base_addr, int base_data, int reg,
-				 unsigned clr, unsigned set)
-{
-	unsigned long flags;
-	unsigned int val;
-
-	spin_lock_irqsave(&dcr_ind_lock, flags);
-	__mtdcr(base_addr, reg);
-	val = (__mfdcr(base_data) & ~clr) | set;
-	__mtdcr(base_data, val);
-	spin_unlock_irqrestore(&dcr_ind_lock, flags);
-}
-
-#define mfdcri(base, reg)	__mfdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
-					 DCRN_ ## base ## _CONFIG_DATA,	\
-					 reg)
-
-#define mtdcri(base, reg, data)	__mtdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
-					 DCRN_ ## base ## _CONFIG_DATA,	\
-					 reg, data)
-
-#define dcri_clrset(base, reg, clr, set)	__dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR,	\
-							      DCRN_ ## base ## _CONFIG_DATA,	\
-							      reg, clr, set)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h
deleted file mode 100644
index 29b0ecef980a..000000000000
--- a/include/asm-powerpc/dcr-regs.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
- * 4xx processors
- *
- *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
- *                   <benh@kernel.crashing.org>
- *
- * Mostly lifted from asm-ppc/ibm4xx.h by
- *
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- */
-
-#ifndef __DCR_REGS_H__
-#define __DCR_REGS_H__
-
-/*
- * Most DCRs used for controlling devices such as the MAL, DMA engine,
- * etc... are obtained for the device tree.
- *
- * The definitions in this files are fixed DCRs and indirect DCRs that
- * are commonly used outside of specific drivers or refer to core
- * common registers that may occasionally have to be tweaked outside
- * of the driver main register set
- */
-
-/* CPRs (440GX and 440SP/440SPe) */
-#define DCRN_CPR0_CONFIG_ADDR	0xc
-#define DCRN_CPR0_CONFIG_DATA	0xd
-
-/* SDRs (440GX and 440SP/440SPe) */
-#define DCRN_SDR0_CONFIG_ADDR 	0xe
-#define DCRN_SDR0_CONFIG_DATA	0xf
-
-#define SDR0_PFC0		0x4100
-#define SDR0_PFC1		0x4101
-#define SDR0_PFC1_EPS		0x1c00000
-#define SDR0_PFC1_EPS_SHIFT	22
-#define SDR0_PFC1_RMII		0x02000000
-#define SDR0_MFR		0x4300
-#define SDR0_MFR_TAH0 		0x80000000  	/* TAHOE0 Enable */
-#define SDR0_MFR_TAH1 		0x40000000  	/* TAHOE1 Enable */
-#define SDR0_MFR_PCM  		0x10000000  	/* PPC440GP irq compat mode */
-#define SDR0_MFR_ECS  		0x08000000  	/* EMAC int clk */
-#define SDR0_MFR_T0TXFL		0x00080000
-#define SDR0_MFR_T0TXFH		0x00040000
-#define SDR0_MFR_T1TXFL		0x00020000
-#define SDR0_MFR_T1TXFH		0x00010000
-#define SDR0_MFR_E0TXFL		0x00008000
-#define SDR0_MFR_E0TXFH		0x00004000
-#define SDR0_MFR_E0RXFL		0x00002000
-#define SDR0_MFR_E0RXFH		0x00001000
-#define SDR0_MFR_E1TXFL		0x00000800
-#define SDR0_MFR_E1TXFH		0x00000400
-#define SDR0_MFR_E1RXFL		0x00000200
-#define SDR0_MFR_E1RXFH		0x00000100
-#define SDR0_MFR_E2TXFL		0x00000080
-#define SDR0_MFR_E2TXFH		0x00000040
-#define SDR0_MFR_E2RXFL		0x00000020
-#define SDR0_MFR_E2RXFH		0x00000010
-#define SDR0_MFR_E3TXFL		0x00000008
-#define SDR0_MFR_E3TXFH		0x00000004
-#define SDR0_MFR_E3RXFL		0x00000002
-#define SDR0_MFR_E3RXFH		0x00000001
-#define SDR0_UART0		0x0120
-#define SDR0_UART1		0x0121
-#define SDR0_UART2		0x0122
-#define SDR0_UART3		0x0123
-#define SDR0_CUST0		0x4000
-
-/*
- * All those DCR register addresses are offsets from the base address
- * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
- * excluded here and configured in the device tree.
- */
-#define DCRN_SRAM0_SB0CR	0x00
-#define DCRN_SRAM0_SB1CR	0x01
-#define DCRN_SRAM0_SB2CR	0x02
-#define DCRN_SRAM0_SB3CR	0x03
-#define  SRAM_SBCR_BU_MASK	0x00000180
-#define  SRAM_SBCR_BS_64KB	0x00000800
-#define  SRAM_SBCR_BU_RO	0x00000080
-#define  SRAM_SBCR_BU_RW	0x00000180
-#define DCRN_SRAM0_BEAR		0x04
-#define DCRN_SRAM0_BESR0	0x05
-#define DCRN_SRAM0_BESR1	0x06
-#define DCRN_SRAM0_PMEG		0x07
-#define DCRN_SRAM0_CID		0x08
-#define DCRN_SRAM0_REVID	0x09
-#define DCRN_SRAM0_DPC		0x0a
-#define  SRAM_DPC_ENABLE	0x80000000
-
-/*
- * All those DCR register addresses are offsets from the base address
- * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
- * excluded here and configured in the device tree.
- */
-#define DCRN_L2C0_CFG		0x00
-#define  L2C_CFG_L2M		0x80000000
-#define  L2C_CFG_ICU		0x40000000
-#define  L2C_CFG_DCU		0x20000000
-#define  L2C_CFG_DCW_MASK	0x1e000000
-#define  L2C_CFG_TPC		0x01000000
-#define  L2C_CFG_CPC		0x00800000
-#define  L2C_CFG_FRAN		0x00200000
-#define  L2C_CFG_SS_MASK	0x00180000
-#define  L2C_CFG_SS_256		0x00000000
-#define  L2C_CFG_CPIM		0x00040000
-#define  L2C_CFG_TPIM		0x00020000
-#define  L2C_CFG_LIM		0x00010000
-#define  L2C_CFG_PMUX_MASK	0x00007000
-#define  L2C_CFG_PMUX_SNP	0x00000000
-#define  L2C_CFG_PMUX_IF	0x00001000
-#define  L2C_CFG_PMUX_DF	0x00002000
-#define  L2C_CFG_PMUX_DS	0x00003000
-#define  L2C_CFG_PMIM		0x00000800
-#define  L2C_CFG_TPEI		0x00000400
-#define  L2C_CFG_CPEI		0x00000200
-#define  L2C_CFG_NAM		0x00000100
-#define  L2C_CFG_SMCM		0x00000080
-#define  L2C_CFG_NBRM		0x00000040
-#define  L2C_CFG_RDBW		0x00000008	/* only 460EX/GT */
-#define DCRN_L2C0_CMD		0x01
-#define  L2C_CMD_CLR		0x80000000
-#define  L2C_CMD_DIAG		0x40000000
-#define  L2C_CMD_INV		0x20000000
-#define  L2C_CMD_CCP		0x10000000
-#define  L2C_CMD_CTE		0x08000000
-#define  L2C_CMD_STRC		0x04000000
-#define  L2C_CMD_STPC		0x02000000
-#define  L2C_CMD_RPMC		0x01000000
-#define  L2C_CMD_HCC		0x00800000
-#define DCRN_L2C0_ADDR		0x02
-#define DCRN_L2C0_DATA		0x03
-#define DCRN_L2C0_SR		0x04
-#define  L2C_SR_CC		0x80000000
-#define  L2C_SR_CPE		0x40000000
-#define  L2C_SR_TPE		0x20000000
-#define  L2C_SR_LRU		0x10000000
-#define  L2C_SR_PCS		0x08000000
-#define DCRN_L2C0_REVID		0x05
-#define DCRN_L2C0_SNP0		0x06
-#define DCRN_L2C0_SNP1		0x07
-#define  L2C_SNP_BA_MASK	0xffff0000
-#define  L2C_SNP_SSR_MASK	0x0000f000
-#define  L2C_SNP_SSR_32G	0x0000f000
-#define  L2C_SNP_ESR		0x00000800
-
-#endif /* __DCR_REGS_H__ */
diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h
deleted file mode 100644
index 53b283050ab3..000000000000
--- a/include/asm-powerpc/dcr.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
- *                    <benh@kernel.crashing.org>
- *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_DCR_H
-#define _ASM_POWERPC_DCR_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_PPC_DCR
-
-#ifdef CONFIG_PPC_DCR_NATIVE
-#include <asm/dcr-native.h>
-#endif
-
-#ifdef CONFIG_PPC_DCR_MMIO
-#include <asm/dcr-mmio.h>
-#endif
-
-
-/* Indirection layer for providing both NATIVE and MMIO support. */
-
-#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
-
-#include <asm/dcr-generic.h>
-
-#define DCR_MAP_OK(host)	dcr_map_ok_generic(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
-
-#else
-
-#ifdef CONFIG_PPC_DCR_NATIVE
-typedef dcr_host_native_t dcr_host_t;
-#define DCR_MAP_OK(host)	dcr_map_ok_native(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
-#else
-typedef dcr_host_mmio_t dcr_host_t;
-#define DCR_MAP_OK(host)	dcr_map_ok_mmio(host)
-#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
-#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
-#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
-#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
-#endif
-
-#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
-
-/*
- * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
- * base from the device-tree
- */
-#ifdef CONFIG_PPC_MERGE
-struct device_node;
-extern unsigned int dcr_resource_start(struct device_node *np,
-				       unsigned int index);
-extern unsigned int dcr_resource_len(struct device_node *np,
-				     unsigned int index);
-#endif /* CONFIG_PPC_MERGE */
-
-#endif /* CONFIG_PPC_DCR */
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DCR_H */
diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h
deleted file mode 100644
index f9200a65c632..000000000000
--- a/include/asm-powerpc/delay.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _ASM_POWERPC_DELAY_H
-#define _ASM_POWERPC_DELAY_H
-#ifdef __KERNEL__
-
-/*
- * Copyright 1996, Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan,
- * Anton Blanchard.
- */
-
-extern void __delay(unsigned long loops);
-extern void udelay(unsigned long usecs);
-
-/*
- * On shared processor machines the generic implementation of mdelay can
- * result in large errors. While each iteration of the loop inside mdelay
- * is supposed to take 1ms, the hypervisor could sleep our partition for
- * longer (eg 10ms). With the right timing these errors can add up.
- *
- * Since there is no 32bit overflow issue on 64bit kernels, just call
- * udelay directly.
- */
-#ifdef CONFIG_PPC64
-#define mdelay(n)	udelay((n) * 1000)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_DELAY_H */
diff --git a/include/asm-powerpc/device.h b/include/asm-powerpc/device.h
deleted file mode 100644
index 228ab2a315b9..000000000000
--- a/include/asm-powerpc/device.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#ifndef _ASM_POWERPC_DEVICE_H
-#define _ASM_POWERPC_DEVICE_H
-
-struct dma_mapping_ops;
-struct device_node;
-
-struct dev_archdata {
-	/* Optional pointer to an OF device node */
-	struct device_node	*of_node;
-
-	/* DMA operations on that device */
-	struct dma_mapping_ops	*dma_ops;
-	void			*dma_data;
-
-	/* NUMA node if applicable */
-	int			numa_node;
-};
-
-#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/include/asm-powerpc/div64.h b/include/asm-powerpc/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-powerpc/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
deleted file mode 100644
index 74c549780987..000000000000
--- a/include/asm-powerpc/dma-mapping.h
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * Copyright (C) 2004 IBM
- *
- * Implements the generic device dma API for powerpc.
- * the pci and vio busses
- */
-#ifndef _ASM_DMA_MAPPING_H
-#define _ASM_DMA_MAPPING_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/cache.h>
-/* need struct page definitions */
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-attrs.h>
-#include <asm/io.h>
-
-#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * DMA-consistent mapping functions for PowerPCs that don't support
- * cache snooping.  These allocate/free a region of uncached mapped
- * memory space for use with DMA devices.  Alternatively, you could
- * allocate the space "normally" and use the cache management functions
- * to ensure it is consistent.
- */
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
-extern void __dma_free_coherent(size_t size, void *vaddr);
-extern void __dma_sync(void *vaddr, size_t size, int direction);
-extern void __dma_sync_page(struct page *page, unsigned long offset,
-				 size_t size, int direction);
-
-#else /* ! CONFIG_NOT_COHERENT_CACHE */
-/*
- * Cache coherent cores.
- */
-
-#define __dma_alloc_coherent(gfp, size, handle)	NULL
-#define __dma_free_coherent(size, addr)		((void)0)
-#define __dma_sync(addr, size, rw)		((void)0)
-#define __dma_sync_page(pg, off, sz, rw)	((void)0)
-
-#endif /* ! CONFIG_NOT_COHERENT_CACHE */
-
-#ifdef CONFIG_PPC64
-
-static inline unsigned long device_to_mask(struct device *dev)
-{
-	if (dev->dma_mask && *dev->dma_mask)
-		return *dev->dma_mask;
-	/* Assume devices without mask can take 32 bit addresses */
-	return 0xfffffffful;
-}
-
-/*
- * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
- */
-struct dma_mapping_ops {
-	void *		(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void		(*free_coherent)(struct device *dev, size_t size,
-				void *vaddr, dma_addr_t dma_handle);
-	dma_addr_t	(*map_single)(struct device *dev, void *ptr,
-				size_t size, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_single)(struct device *dev, dma_addr_t dma_addr,
-				size_t size, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	int		(*dma_supported)(struct device *dev, u64 mask);
-	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
-};
-
-static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
-{
-	/* We don't handle the NULL dev case for ISA for now. We could
-	 * do it via an out of line call but it is not needed for now. The
-	 * only ISA DMA device we support is the floppy and we have a hack
-	 * in the floppy driver directly to get a device for us.
-	 */
-	if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
-		return NULL;
-	return dev->archdata.dma_ops;
-}
-
-static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
-{
-	dev->archdata.dma_ops = ops;
-}
-
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	if (unlikely(dma_ops == NULL))
-		return 0;
-	if (dma_ops->dma_supported == NULL)
-		return 1;
-	return dma_ops->dma_supported(dev, mask);
-}
-
-/* We have our own implementation of pci_set_dma_mask() */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	if (unlikely(dma_ops == NULL))
-		return -EIO;
-	if (dma_ops->set_dma_mask != NULL)
-		return dma_ops->set_dma_mask(dev, dma_mask);
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-	*dev->dma_mask = dma_mask;
-	return 0;
-}
-
-static inline dma_addr_t dma_map_single_attrs(struct device *dev,
-					      void *cpu_addr,
-					      size_t size,
-					      enum dma_data_direction direction,
-					      struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
-}
-
-static inline void dma_unmap_single_attrs(struct device *dev,
-					  dma_addr_t dma_addr,
-					  size_t size,
-					  enum dma_data_direction direction,
-					  struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
-}
-
-static inline dma_addr_t dma_map_page_attrs(struct device *dev,
-					    struct page *page,
-					    unsigned long offset, size_t size,
-					    enum dma_data_direction direction,
-					    struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_single(dev, page_address(page) + offset, size,
-			direction, attrs);
-}
-
-static inline void dma_unmap_page_attrs(struct device *dev,
-					dma_addr_t dma_address,
-					size_t size,
-					enum dma_data_direction direction,
-					struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
-}
-
-static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
-				   int nents, enum dma_data_direction direction,
-				   struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
-}
-
-static inline void dma_unmap_sg_attrs(struct device *dev,
-				      struct scatterlist *sg,
-				      int nhwentries,
-				      enum dma_data_direction direction,
-				      struct dma_attrs *attrs)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries,
-				enum dma_data_direction direction)
-{
-	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
-}
-
-/*
- * Available generic sets of operations
- */
-extern struct dma_mapping_ops dma_iommu_ops;
-extern struct dma_mapping_ops dma_direct_ops;
-
-#else /* CONFIG_PPC64 */
-
-#define dma_supported(dev, mask)	(1)
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t * dma_handle,
-				       gfp_t gfp)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	return __dma_alloc_coherent(size, dma_handle, gfp);
-#else
-	void *ret;
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
-	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
-		gfp |= GFP_DMA;
-
-	ret = (void *)__get_free_pages(gfp, get_order(size));
-
-	if (ret != NULL) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_bus(ret);
-	}
-
-	return ret;
-#endif
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-		  dma_addr_t dma_handle)
-{
-#ifdef CONFIG_NOT_COHERENT_CACHE
-	__dma_free_coherent(size, vaddr);
-#else
-	free_pages((unsigned long)vaddr, get_order(size));
-#endif
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	__dma_sync(ptr, size, direction);
-
-	return virt_to_bus(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	/* We do nothing. */
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	__dma_sync_page(page, offset, size, direction);
-
-	return page_to_bus(page) + offset;
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	/* We do nothing. */
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-	   enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(direction == DMA_NONE);
-
-	for_each_sg(sgl, sg, nents, i) {
-		BUG_ON(!sg_page(sg));
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
-	}
-
-	return nents;
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries,
-				enum dma_data_direction direction)
-{
-	/* We don't do anything here. */
-}
-
-#endif /* CONFIG_PPC64 */
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	__dma_sync(bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	__dma_sync(bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(direction == DMA_NONE);
-
-	for_each_sg(sgl, sg, nents, i)
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(direction == DMA_NONE);
-
-	for_each_sg(sgl, sg, nents, i)
-		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
-}
-
-static inline int dma_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_PPC64
-	return (dma_addr == DMA_ERROR_CODE);
-#else
-	return 0;
-#endif
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define dma_is_consistent(d, h)	(0)
-#else
-#define dma_is_consistent(d, h)	(1)
-#endif
-
-static inline int dma_get_cache_alignment(void)
-{
-#ifdef CONFIG_PPC64
-	/* no easy way to get cache size on all processors, so return
-	 * the maximum possible, to be safe */
-	return (1 << INTERNODE_CACHE_SHIFT);
-#else
-	/*
-	 * Each processor family will define its own L1_CACHE_SHIFT,
-	 * L1_CACHE_BYTES wraps to this, so this is always safe.
-	 */
-	return L1_CACHE_BYTES;
-#endif
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-		enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	__dma_sync(vaddr, size, (int)direction);
-}
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_DMA_MAPPING_H */
diff --git a/include/asm-powerpc/dma.h b/include/asm-powerpc/dma.h
deleted file mode 100644
index a7e06e25c708..000000000000
--- a/include/asm-powerpc/dma.h
+++ /dev/null
@@ -1,360 +0,0 @@
-#ifndef _ASM_POWERPC_DMA_H
-#define _ASM_POWERPC_DMA_H
-#ifdef __KERNEL__
-
-/*
- * Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- * Changes for ppc sound by Christoph Nadig
- */
-
-/*
- * Note: Adapted for PowerPC by Gary Thomas
- * Modified by Cort Dougan <cort@cs.nmt.edu>
- *
- * None of this really applies for Power Macintoshes.  There is
- * basically just enough here to get kernel/dma.c to compile.
- *
- * There may be some comments or restrictions made here which are
- * not valid for the PReP platform.  Take what you read
- * with a grain of salt.
- */
-
-#include <asm/io.h>
-#include <linux/spinlock.h>
-#include <asm/system.h>
-
-#ifndef MAX_DMA_CHANNELS
-#define MAX_DMA_CHANNELS	8
-#endif
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-/* Doesn't really apply... */
-#define MAX_DMA_ADDRESS		(~0UL)
-
-#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI)
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb	outb_p
-#else
-#define dma_outb	outb
-#endif
-
-#define dma_inb		inb
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
- * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		0x08	/* command register (w) */
-#define DMA1_STAT_REG		0x08	/* status register (r) */
-#define DMA1_REQ_REG		0x09	/* request register (w) */
-#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
-#define DMA1_MODE_REG		0x0B	/* mode register (w) */
-#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
-#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
-#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
-#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */
-
-#define DMA2_CMD_REG		0xD0	/* command register (w) */
-#define DMA2_STAT_REG		0xD0	/* status register (r) */
-#define DMA2_REQ_REG		0xD2	/* request register (w) */
-#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
-#define DMA2_MODE_REG		0xD6	/* mode register (w) */
-#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
-#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
-#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
-#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */
-
-#define DMA_ADDR_0		0x00	/* DMA address registers */
-#define DMA_ADDR_1		0x02
-#define DMA_ADDR_2		0x04
-#define DMA_ADDR_3		0x06
-#define DMA_ADDR_4		0xC0
-#define DMA_ADDR_5		0xC4
-#define DMA_ADDR_6		0xC8
-#define DMA_ADDR_7		0xCC
-
-#define DMA_CNT_0		0x01	/* DMA count registers */
-#define DMA_CNT_1		0x03
-#define DMA_CNT_2		0x05
-#define DMA_CNT_3		0x07
-#define DMA_CNT_4		0xC2
-#define DMA_CNT_5		0xC6
-#define DMA_CNT_6		0xCA
-#define DMA_CNT_7		0xCE
-
-#define DMA_LO_PAGE_0		0x87	/* DMA page registers */
-#define DMA_LO_PAGE_1		0x83
-#define DMA_LO_PAGE_2		0x81
-#define DMA_LO_PAGE_3		0x82
-#define DMA_LO_PAGE_5		0x8B
-#define DMA_LO_PAGE_6		0x89
-#define DMA_LO_PAGE_7		0x8A
-
-#define DMA_HI_PAGE_0		0x487	/* DMA page registers */
-#define DMA_HI_PAGE_1		0x483
-#define DMA_HI_PAGE_2		0x481
-#define DMA_HI_PAGE_3		0x482
-#define DMA_HI_PAGE_5		0x48B
-#define DMA_HI_PAGE_6		0x489
-#define DMA_HI_PAGE_7		0x48A
-
-#define DMA1_EXT_REG		0x40B
-#define DMA2_EXT_REG		0x4D6
-
-#ifndef __powerpc64__
-    /* in arch/ppc/kernel/setup.c -- Cort */
-    extern unsigned int DMA_MODE_WRITE;
-    extern unsigned int DMA_MODE_READ;
-    extern unsigned long ISA_DMA_THRESHOLD;
-#else
-    #define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-    #define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#endif
-
-#define DMA_MODE_CASCADE	0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT		0x10
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	unsigned char ucDmaCmd = 0x00;
-
-	if (dmanr != 4) {
-		dma_outb(0, DMA2_MASK_REG);	/* This may not be enabled */
-		dma_outb(ucDmaCmd, DMA2_CMD_REG);	/* Enable group */
-	}
-	if (dmanr <= 3) {
-		dma_outb(dmanr, DMA1_MASK_REG);
-		dma_outb(ucDmaCmd, DMA1_CMD_REG);	/* Enable group */
-	} else {
-		dma_outb(dmanr & 3, DMA2_MASK_REG);
-	}
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr <= 3)
-		dma_outb(dmanr | 4, DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr <= 3)
-		dma_outb(0, DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr <= 3)
-		dma_outb(mode | dmanr, DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
-{
-	switch (dmanr) {
-	case 0:
-		dma_outb(pagenr, DMA_LO_PAGE_0);
-		dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
-		break;
-	case 1:
-		dma_outb(pagenr, DMA_LO_PAGE_1);
-		dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
-		break;
-	case 2:
-		dma_outb(pagenr, DMA_LO_PAGE_2);
-		dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
-		break;
-	case 3:
-		dma_outb(pagenr, DMA_LO_PAGE_3);
-		dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
-		break;
-	case 5:
-		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
-		dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
-		break;
-	case 6:
-		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
-		dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
-		break;
-	case 7:
-		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
-		dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
-		break;
-	}
-}
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
-{
-	if (dmanr <= 3) {
-		dma_outb(phys & 0xff,
-			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
-		dma_outb((phys >> 8) & 0xff,
-			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
-	} else {
-		dma_outb((phys >> 1) & 0xff,
-			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
-		dma_outb((phys >> 9) & 0xff,
-			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
-	}
-	set_dma_page(dmanr, phys >> 16);
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	count--;
-	if (dmanr <= 3) {
-		dma_outb(count & 0xff,
-			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
-		dma_outb((count >> 8) & 0xff,
-			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
-	} else {
-		dma_outb((count >> 1) & 0xff,
-			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
-		dma_outb((count >> 9) & 0xff,
-			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
-	}
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr <= 3)
-	    ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
-	    : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-
-	return (dmanr <= 3) ? count : (count << 1);
-}
-
-/* These are in kernel/dma.c: */
-
-/* reserve a DMA channel */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-/* release it again */
-extern void free_dma(unsigned int dmanr);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	(0)
-#endif
-
-#endif	/* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_DMA_H */
diff --git a/include/asm-powerpc/edac.h b/include/asm-powerpc/edac.h
deleted file mode 100644
index 6ead88bbfbb8..000000000000
--- a/include/asm-powerpc/edac.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * PPC EDAC common defs
- *
- * Author: Dave Jiang <djiang@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef ASM_EDAC_H
-#define ASM_EDAC_H
-/*
- * ECC atomic, DMA, SMP and interrupt safe scrub function.
- * Implements the per arch atomic_scrub() that EDAC use for software
- * ECC scrubbing.  It reads memory and then writes back the original
- * value, allowing the hardware to detect and correct memory errors.
- */
-static __inline__ void atomic_scrub(void *va, u32 size)
-{
-	unsigned int *virt_addr = va;
-	unsigned int temp;
-	unsigned int i;
-
-	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
-		/* Very carefully read and write to memory atomically
-		 * so we are interrupt, DMA and SMP safe.
-		 */
-		__asm__ __volatile__ ("\n\
-				1:	lwarx	%0,0,%1\n\
-					stwcx.	%0,0,%1\n\
-					bne-	1b\n\
-					isync"
-					: "=&r"(temp)
-					: "r"(virt_addr)
-					: "cr0", "memory");
-	}
-}
-
-#endif
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
deleted file mode 100644
index b886bec67016..000000000000
--- a/include/asm-powerpc/eeh.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * eeh.h
- * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _PPC64_EEH_H
-#define _PPC64_EEH_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/string.h>
-
-struct pci_dev;
-struct pci_bus;
-struct device_node;
-
-#ifdef CONFIG_EEH
-
-extern int eeh_subsystem_enabled;
-
-/* Values for eeh_mode bits in device_node */
-#define EEH_MODE_SUPPORTED     (1<<0)
-#define EEH_MODE_NOCHECK       (1<<1)
-#define EEH_MODE_ISOLATED      (1<<2)
-#define EEH_MODE_RECOVERING    (1<<3)
-#define EEH_MODE_IRQ_DISABLED  (1<<4)
-
-/* Max number of EEH freezes allowed before we consider the device
- * to be permanently disabled. */
-#define EEH_MAX_ALLOWED_FREEZES 5
-
-void __init eeh_init(void);
-unsigned long eeh_check_failure(const volatile void __iomem *token,
-				unsigned long val);
-int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
-void __init pci_addr_cache_build(void);
-
-/**
- * eeh_add_device_early
- * eeh_add_device_late
- *
- * Perform eeh initialization for devices added after boot.
- * Call eeh_add_device_early before doing any i/o to the
- * device (including config space i/o).  Call eeh_add_device_late
- * to finish the eeh setup for this device.
- */
-void eeh_add_device_tree_early(struct device_node *);
-void eeh_add_device_tree_late(struct pci_bus *);
-
-/**
- * eeh_remove_device_recursive - undo EEH for device & children.
- * @dev: pci device to be removed
- *
- * As above, this removes the device; it also removes child
- * pci devices as well.
- */
-void eeh_remove_bus_device(struct pci_dev *);
-
-/**
- * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
- *
- * If this macro yields TRUE, the caller relays to eeh_check_failure()
- * which does further tests out of line.
- */
-#define EEH_POSSIBLE_ERROR(val, type)	((val) == (type)~0 && eeh_subsystem_enabled)
-
-/*
- * Reads from a device which has been isolated by EEH will return
- * all 1s.  This macro gives an all-1s value of the given size (in
- * bytes: 1, 2, or 4) for comparing with the result of a read.
- */
-#define EEH_IO_ERROR_VALUE(size)	(~0U >> ((4 - (size)) * 8))
-
-#else /* !CONFIG_EEH */
-static inline void eeh_init(void) { }
-
-static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
-{
-	return val;
-}
-
-static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
-{
-	return 0;
-}
-
-static inline void pci_addr_cache_build(void) { }
-
-static inline void eeh_add_device_tree_early(struct device_node *dn) { }
-
-static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
-
-static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
-#define EEH_POSSIBLE_ERROR(val, type) (0)
-#define EEH_IO_ERROR_VALUE(size) (-1UL)
-#endif /* CONFIG_EEH */
-
-/*
- * MMIO read/write operations with EEH support.
- */
-static inline u8 eeh_readb(const volatile void __iomem *addr)
-{
-	u8 val = in_8(addr);
-	if (EEH_POSSIBLE_ERROR(val, u8))
-		return eeh_check_failure(addr, val);
-	return val;
-}
-
-static inline u16 eeh_readw(const volatile void __iomem *addr)
-{
-	u16 val = in_le16(addr);
-	if (EEH_POSSIBLE_ERROR(val, u16))
-		return eeh_check_failure(addr, val);
-	return val;
-}
-
-static inline u32 eeh_readl(const volatile void __iomem *addr)
-{
-	u32 val = in_le32(addr);
-	if (EEH_POSSIBLE_ERROR(val, u32))
-		return eeh_check_failure(addr, val);
-	return val;
-}
-
-static inline u64 eeh_readq(const volatile void __iomem *addr)
-{
-	u64 val = in_le64(addr);
-	if (EEH_POSSIBLE_ERROR(val, u64))
-		return eeh_check_failure(addr, val);
-	return val;
-}
-
-static inline u16 eeh_readw_be(const volatile void __iomem *addr)
-{
-	u16 val = in_be16(addr);
-	if (EEH_POSSIBLE_ERROR(val, u16))
-		return eeh_check_failure(addr, val);
-	return val;
-}
-
-static inline u32 eeh_readl_be(const volatile void __iomem *addr)
-{
-	u32 val = in_be32(addr);
-	if (EEH_POSSIBLE_ERROR(val, u32))
-		return eeh_check_failure(addr, val);
-	return val;
-}
-
-static inline u64 eeh_readq_be(const volatile void __iomem *addr)
-{
-	u64 val = in_be64(addr);
-	if (EEH_POSSIBLE_ERROR(val, u64))
-		return eeh_check_failure(addr, val);
-	return val;
-}
-
-static inline void eeh_memcpy_fromio(void *dest, const
-				     volatile void __iomem *src,
-				     unsigned long n)
-{
-	_memcpy_fromio(dest, src, n);
-
-	/* Look for ffff's here at dest[n].  Assume that at least 4 bytes
-	 * were copied. Check all four bytes.
-	 */
-	if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32))
-		eeh_check_failure(src, *((u32 *)(dest + n - 4)));
-}
-
-/* in-string eeh macros */
-static inline void eeh_readsb(const volatile void __iomem *addr, void * buf,
-			      int ns)
-{
-	_insb(addr, buf, ns);
-	if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
-		eeh_check_failure(addr, *(u8*)buf);
-}
-
-static inline void eeh_readsw(const volatile void __iomem *addr, void * buf,
-			      int ns)
-{
-	_insw(addr, buf, ns);
-	if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
-		eeh_check_failure(addr, *(u16*)buf);
-}
-
-static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
-			      int nl)
-{
-	_insl(addr, buf, nl);
-	if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
-		eeh_check_failure(addr, *(u32*)buf);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_EEH_H */
diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h
deleted file mode 100644
index cc3cb04539ac..000000000000
--- a/include/asm-powerpc/eeh_event.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *	eeh_event.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
- */
-
-#ifndef ASM_POWERPC_EEH_EVENT_H
-#define ASM_POWERPC_EEH_EVENT_H
-#ifdef __KERNEL__
-
-/** EEH event -- structure holding pci controller data that describes
- *  a change in the isolation status of a PCI slot.  A pointer
- *  to this struct is passed as the data pointer in a notify callback.
- */
-struct eeh_event {
-	struct list_head     list;
-	struct device_node 	*dn;   /* struct device node */
-	struct pci_dev       *dev;  /* affected device */
-};
-
-/**
- * eeh_send_failure_event - generate a PCI error event
- * @dev pci device
- *
- * This routine builds a PCI error event which will be delivered
- * to all listeners on the eeh_notifier_chain.
- *
- * This routine can be called within an interrupt context;
- * the actual event will be delivered in a normal context
- * (from a workqueue).
- */
-int eeh_send_failure_event (struct device_node *dn,
-                            struct pci_dev *dev);
-
-/* Main recovery function */
-struct pci_dn * handle_eeh_events (struct eeh_event *);
-
-#endif /* __KERNEL__ */
-#endif /* ASM_POWERPC_EEH_EVENT_H */
diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h
deleted file mode 100644
index 89664675b469..000000000000
--- a/include/asm-powerpc/elf.h
+++ /dev/null
@@ -1,416 +0,0 @@
-#ifndef _ASM_POWERPC_ELF_H
-#define _ASM_POWERPC_ELF_H
-
-#ifdef __KERNEL__
-#include <linux/sched.h>	/* for task_struct */
-#include <asm/page.h>
-#include <asm/string.h>
-#endif
-
-#include <asm/types.h>
-#include <asm/ptrace.h>
-#include <asm/cputable.h>
-#include <asm/auxvec.h>
-
-/* PowerPC relocations defined by the ABIs */
-#define R_PPC_NONE		0
-#define R_PPC_ADDR32		1	/* 32bit absolute address */
-#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-#define R_PPC_ADDR16		3	/* 16bit absolute address */
-#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-#define R_PPC_ADDR14_BRTAKEN	8
-#define R_PPC_ADDR14_BRNTAKEN	9
-#define R_PPC_REL24		10	/* PC relative 26 bit */
-#define R_PPC_REL14		11	/* PC relative 16 bit */
-#define R_PPC_REL14_BRTAKEN	12
-#define R_PPC_REL14_BRNTAKEN	13
-#define R_PPC_GOT16		14
-#define R_PPC_GOT16_LO		15
-#define R_PPC_GOT16_HI		16
-#define R_PPC_GOT16_HA		17
-#define R_PPC_PLTREL24		18
-#define R_PPC_COPY		19
-#define R_PPC_GLOB_DAT		20
-#define R_PPC_JMP_SLOT		21
-#define R_PPC_RELATIVE		22
-#define R_PPC_LOCAL24PC		23
-#define R_PPC_UADDR32		24
-#define R_PPC_UADDR16		25
-#define R_PPC_REL32		26
-#define R_PPC_PLT32		27
-#define R_PPC_PLTREL32		28
-#define R_PPC_PLT16_LO		29
-#define R_PPC_PLT16_HI		30
-#define R_PPC_PLT16_HA		31
-#define R_PPC_SDAREL16		32
-#define R_PPC_SECTOFF		33
-#define R_PPC_SECTOFF_LO	34
-#define R_PPC_SECTOFF_HI	35
-#define R_PPC_SECTOFF_HA	36
-
-/* PowerPC relocations defined for the TLS access ABI.  */
-#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-
-/* keep this the last entry. */
-#define R_PPC_NUM		95
-
-/*
- * ELF register definitions..
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
-#define ELF_NFPREG	33	/* includes fpscr */
-
-typedef unsigned long elf_greg_t64;
-typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
-
-typedef unsigned int elf_greg_t32;
-typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
-typedef elf_gregset_t32 compat_elf_gregset_t;
-
-/*
- * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
- */
-#ifdef __powerpc64__
-# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
-# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
-# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
-# define ELF_GREG_TYPE	elf_greg_t64
-#else
-# define ELF_NEVRREG	34	/* includes acc (as 2) */
-# define ELF_NVRREG	33	/* includes vscr */
-# define ELF_GREG_TYPE	elf_greg_t32
-# define ELF_ARCH	EM_PPC
-# define ELF_CLASS	ELFCLASS32
-# define ELF_DATA	ELFDATA2MSB
-#endif /* __powerpc64__ */
-
-#ifndef ELF_ARCH
-# define ELF_ARCH	EM_PPC64
-# define ELF_CLASS	ELFCLASS64
-# define ELF_DATA	ELFDATA2MSB
-  typedef elf_greg_t64 elf_greg_t;
-  typedef elf_gregset_t64 elf_gregset_t;
-#else
-  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
-  typedef elf_greg_t32 elf_greg_t;
-  typedef elf_gregset_t32 elf_gregset_t;
-#endif /* ELF_ARCH */
-
-/* Floating point registers */
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-
-/* Altivec registers */
-/*
- * The entries with indexes 0-31 contain the corresponding vector registers. 
- * The entry with index 32 contains the vscr as the last word (offset 12) 
- * within the quadword.  This allows the vscr to be stored as either a 
- * quadword (since it must be copied via a vector register to/from storage) 
- * or as a word.  
- *
- * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
- * word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32 
- * ptrace interface.  This allows signal handling and ptrace to use the same 
- * structures.  This also simplifies the implementation of a bi-arch 
- * (combined (32- and 64-bit) gdb.
- *
- * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
- * vrsave along with vscr and so only uses 33 vectors for the register set
- */
-typedef __vector128 elf_vrreg_t;
-typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
-#ifdef __powerpc64__
-typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
-typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
-#endif
-
-#ifdef __KERNEL__
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
-#define compat_elf_check_arch(x)	((x)->e_machine == EM_PPC)
-
-#define USE_ELF_CORE_DUMP
-#define CORE_DUMP_USE_REGSET
-#define ELF_EXEC_PAGESIZE	PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (0x20000000)
-
-/*
- * Our registers are always unsigned longs, whether we're a 32 bit
- * process or 64 bit, on either a 64 bit or 32 bit kernel.
- *
- * This macro relies on elf_regs[i] having the right type to truncate to,
- * either u32 or u64.  It defines the body of the elf_core_copy_regs
- * function, either the native one with elf_gregset_t elf_regs or
- * the 32-bit one with elf_gregset_t32 elf_regs.
- */
-#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \
-	int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \
-			   (size_t)ELF_NGREG);			  \
-	for (i = 0; i < nregs; i++) \
-		elf_regs[i] = ((unsigned long *) regs)[i]; \
-	memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0]))
-
-/* Common routine for both 32-bit and 64-bit native processes */
-static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
-					  struct pt_regs *regs)
-{
-	PPC_ELF_CORE_COPY_REGS(elf_regs, regs);
-}
-#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
-
-typedef elf_vrregset_t elf_fpxregset_t;
-
-/* ELF_HWCAP yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  This could be done in userspace,
-   but it's not easy, and we've already done it here.  */
-# define ELF_HWCAP	(cur_cpu_spec->cpu_user_features)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM	(cur_cpu_spec->platform)
-
-#ifdef __powerpc64__
-# define ELF_PLAT_INIT(_r, load_addr)	do {	\
-	_r->gpr[2] = load_addr; 		\
-} while (0)
-#endif /* __powerpc64__ */
-
-#ifdef __powerpc64__
-# define SET_PERSONALITY(ex, ibcs2)				\
-do {								\
-	unsigned long new_flags = 0;				\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
-		new_flags = _TIF_32BIT;				\
-	if ((current_thread_info()->flags & _TIF_32BIT)		\
-	    != new_flags)					\
-		set_thread_flag(TIF_ABI_PENDING);		\
-	else							\
-		clear_thread_flag(TIF_ABI_PENDING);		\
-	if (personality(current->personality) != PER_LINUX32)	\
-		set_personality(PER_LINUX |			\
-			(current->personality & (~PER_MASK)));	\
-} while (0)
-/*
- * An executable for which elf_read_implies_exec() returns TRUE will
- * have the READ_IMPLIES_EXEC personality flag set automatically. This
- * is only required to work around bugs in old 32bit toolchains. Since
- * the 64bit ABI has never had these issues dont enable the workaround
- * even if we have an executable stack.
- */
-# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
-		(exec_stk != EXSTACK_DISABLE_X) : 0)
-#else 
-# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-#endif /* __powerpc64__ */
-
-extern int dcache_bsize;
-extern int icache_bsize;
-extern int ucache_bsize;
-
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-				       int executable_stack);
-#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
-
-#endif /* __KERNEL__ */
-
-/*
- * The requirements here are:
- * - keep the final alignment of sp (sp & 0xf)
- * - make sure the 32-bit value at the first 16 byte aligned position of
- *   AUXV is greater than 16 for glibc compatibility.
- *   AT_IGNOREPPC is used for that.
- * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
- *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
- * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
- */
-#define ARCH_DLINFO							\
-do {									\
-	/* Handle glibc compatibility. */				\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	/* Cache size items */						\
-	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
-	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
-	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
-	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base)	\
-} while (0)
-
-/* PowerPC64 relocations defined by the ABIs */
-#define R_PPC64_NONE    R_PPC_NONE
-#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
-#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
-#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
-#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
-#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
-#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
-#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
-#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
-#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
-#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
-#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
-#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
-#define R_PPC64_GOT16     R_PPC_GOT16
-#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
-#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
-#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
-
-#define R_PPC64_COPY      R_PPC_COPY
-#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
-#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
-#define R_PPC64_RELATIVE  R_PPC_RELATIVE
-
-#define R_PPC64_UADDR32   R_PPC_UADDR32
-#define R_PPC64_UADDR16   R_PPC_UADDR16
-#define R_PPC64_REL32     R_PPC_REL32
-#define R_PPC64_PLT32     R_PPC_PLT32
-#define R_PPC64_PLTREL32  R_PPC_PLTREL32
-#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
-#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
-#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
-
-#define R_PPC64_SECTOFF     R_PPC_SECTOFF
-#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
-#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
-#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
-#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
-#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
-#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
-#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
-#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
-#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
-#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
-#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
-#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
-#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
-#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
-#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
-#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
-#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
-#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
-#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
-#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
-
-#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
-#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
-#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
-#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
-#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
-#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
-#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
-#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
-#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
-#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
-#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
-
-/* PowerPC64 relocations defined for the TLS access ABI.  */
-#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-
-/* Keep this the last entry.  */
-#define R_PPC64_NUM		107
-
-#ifdef  __KERNEL__
-
-#ifdef CONFIG_SPU_BASE
-/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
-#define NT_SPU		1
-
-#define ARCH_HAVE_EXTRA_ELF_NOTES
-
-#endif /* CONFIG_SPU_BASE */
-
-#endif /* __KERNEL */
-
-#endif /* _ASM_POWERPC_ELF_H */
diff --git a/include/asm-powerpc/emergency-restart.h b/include/asm-powerpc/emergency-restart.h
deleted file mode 100644
index 3711bd9d50bd..000000000000
--- a/include/asm-powerpc/emergency-restart.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/emergency-restart.h>
diff --git a/include/asm-powerpc/errno.h b/include/asm-powerpc/errno.h
deleted file mode 100644
index 8c145fd17d86..000000000000
--- a/include/asm-powerpc/errno.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_POWERPC_ERRNO_H
-#define _ASM_POWERPC_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#undef	EDEADLOCK
-#define	EDEADLOCK	58	/* File locking deadlock error */
-
-#define _LAST_ERRNO	516
-
-#endif	/* _ASM_POWERPC_ERRNO_H */
diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h
deleted file mode 100644
index 329148b5acc6..000000000000
--- a/include/asm-powerpc/exception.h
+++ /dev/null
@@ -1,311 +0,0 @@
-#ifndef _ASM_POWERPC_EXCEPTION_H
-#define _ASM_POWERPC_EXCEPTION_H
-/*
- * Extracted from head_64.S
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
- *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
- *
- *  This file contains the low-level support and setup for the
- *  PowerPC-64 platform, including trap and interrupt dispatch.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-/*
- * The following macros define the code that appears as
- * the prologue to each of the exception handlers.  They
- * are split into two parts to allow a single kernel binary
- * to be used for pSeries and iSeries.
- *
- * We make as much of the exception code common between native
- * exception handlers (including pSeries LPAR) and iSeries LPAR
- * implementations as possible.
- */
-
-#define EX_R9		0
-#define EX_R10		8
-#define EX_R11		16
-#define EX_R12		24
-#define EX_R13		32
-#define EX_SRR0		40
-#define EX_DAR		48
-#define EX_DSISR	56
-#define EX_CCR		60
-#define EX_R3		64
-#define EX_LR		72
-
-/*
- * We're short on space and time in the exception prolog, so we can't
- * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
- * low halfword of the address, but for Kdump we need the whole low
- * word.
- */
-#ifdef CONFIG_CRASH_DUMP
-#define LOAD_HANDLER(reg, label)					\
-	oris	reg,reg,(label)@h;	/* virt addr of handler ... */	\
-	ori	reg,reg,(label)@l;	/* .. and the rest */
-#else
-#define LOAD_HANDLER(reg, label)					\
-	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
-#endif
-
-#define EXCEPTION_PROLOG_1(area)				\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
-	std	r10,area+EX_R10(r13);					\
-	std	r11,area+EX_R11(r13);					\
-	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
-	std	r9,area+EX_R13(r13);					\
-	mfcr	r9
-
-/*
- * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
- * The firmware calls the registered system_reset_fwnmi and
- * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
- * a 32bit application at the time of the event.
- * This firmware bug is present on POWER4 and JS20.
- */
-#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
-	EXCEPTION_PROLOG_1(area);					\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
-	/* force 64bit mode */						\
-	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
-	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
-	/* done 64bit mode */						\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label)						\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
-	EXCEPTION_PROLOG_1(area);					\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label)						\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-/*
- * The common exception prolog is used for all except a few exceptions
- * such as a segment miss on a kernel address.  We have to be prepared
- * to take another exception from the point where we first touch the
- * kernel stack onwards.
- *
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
- */
-#define EXCEPTION_PROLOG_COMMON(n, area)				   \
-	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
-	mr	r10,r1;			/* Save r1			*/ \
-	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
-	beq-	1f;							   \
-	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
-1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,2f;			/* abort if it is		*/ \
-	b	3f;							   \
-2:	li	r1,(n);			/* will be reloaded later	*/ \
-	sth	r1,PACA_TRAP_SAVE(r13);					   \
-	b	bad_stack;						   \
-3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
-	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
-	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
-	std	r10,0(r1);		/* make stack chain pointer	*/ \
-	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
-	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
-	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
-	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
-	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
-	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
-	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
-	ld	r10,area+EX_R10(r13);					   \
-	std	r9,GPR9(r1);						   \
-	std	r10,GPR10(r1);						   \
-	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
-	ld	r10,area+EX_R12(r13);					   \
-	ld	r11,area+EX_R13(r13);					   \
-	std	r9,GPR11(r1);						   \
-	std	r10,GPR12(r1);						   \
-	std	r11,GPR13(r1);						   \
-	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
-	mflr	r9;			/* save LR in stackframe	*/ \
-	std	r9,_LINK(r1);						   \
-	mfctr	r10;			/* save CTR in stackframe	*/ \
-	std	r10,_CTR(r1);						   \
-	lbz	r10,PACASOFTIRQEN(r13);				   \
-	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
-	std	r10,SOFTE(r1);						   \
-	std	r11,_XER(r1);						   \
-	li	r9,(n)+1;						   \
-	std	r9,_TRAP(r1);		/* set trap number		*/ \
-	li	r10,0;							   \
-	ld	r11,exception_marker@toc(r2);				   \
-	std	r10,RESULT(r1);		/* clear regs->result		*/ \
-	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
-
-/*
- * Exception vectors.
- */
-#define STD_EXCEPTION_PSERIES(n, label)			\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-#define HSTD_EXCEPTION_PSERIES(n, label)		\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
-	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR0,r20;				\
-	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
-	. = n;								\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
-	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
-	std	r10,PACA_EXGEN+EX_R10(r13);				\
-	lbz	r10,PACASOFTIRQEN(r13);					\
-	mfcr	r9;							\
-	cmpwi	r10,0;							\
-	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG1;						\
-	std	r10,PACA_EXGEN+EX_R13(r13);				\
-	std	r11,PACA_EXGEN+EX_R11(r13);				\
-	std	r12,PACA_EXGEN+EX_R12(r13);				\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label##_common)				\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-#ifdef CONFIG_PPC_ISERIES
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-BEGIN_FW_FTR_SECTION;				\
-	stb	r11,PACAHARDIRQEN(r13);		\
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
-	TRACE_DISABLE_INTS;			\
-BEGIN_FW_FTR_SECTION;				\
-	mfmsr	r10;				\
-	ori	r10,r10,MSR_EE;			\
-	mtmsrd	r10,1;				\
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#else
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-	stb	r11,PACAHARDIRQEN(r13);		\
-	TRACE_DISABLE_INTS
-#endif /* CONFIG_PPC_ISERIES */
-
-#define ENABLE_INTS				\
-	ld	r12,_MSR(r1);			\
-	mfmsr	r11;				\
-	rlwimi	r11,r12,0,MSR_EE;		\
-	mtmsrd	r11,1
-
-#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-/*
- * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
- * in the idle task and therefore need the special idle handling.
- */
-#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-BEGIN_FTR_SECTION					\
-	bl	.ppc64_runlatch_on;			\
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except_lite
-
-/*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP				\
-BEGIN_FTR_SECTION				\
-	clrrdi	r11,r1,THREAD_SHIFT;		\
-	ld	r9,TI_LOCAL_FLAGS(r11);		\
-	andi.	r10,r9,_TLF_NAPPING;		\
-	bnel	power4_fixup_nap;		\
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
-#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/include/asm-powerpc/fb.h b/include/asm-powerpc/fb.h
deleted file mode 100644
index 411af8d17a69..000000000000
--- a/include/asm-powerpc/fb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT,
-						 vma->vm_end - vma->vm_start,
-						 vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-powerpc/fcntl.h b/include/asm-powerpc/fcntl.h
deleted file mode 100644
index ce5c4516d404..000000000000
--- a/include/asm-powerpc/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_FCNTL_H
-#define _ASM_FCNTL_H
-
-#define O_DIRECTORY      040000	/* must be a directory */
-#define O_NOFOLLOW      0100000	/* don't follow links */
-#define O_LARGEFILE     0200000
-#define O_DIRECT	0400000	/* direct disk access hint */
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _ASM_FCNTL_H */
diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h
deleted file mode 100644
index a1029967620b..000000000000
--- a/include/asm-powerpc/feature-fixups.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H
-#define __ASM_POWERPC_FEATURE_FIXUPS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __ASSEMBLY__
-
-/*
- * Feature section common macros
- *
- * Note that the entries now contain offsets between the table entry
- * and the code rather than absolute code pointers in order to be
- * useable with the vdso shared library. There is also an assumption
- * that values will be negative, that is, the fixup table has to be
- * located after the code it fixes up.
- */
-#if defined(CONFIG_PPC64) && !defined(__powerpc64__)
-/* 64 bits kernel, 32 bits code (ie. vdso32) */
-#define FTR_ENTRY_LONG		.llong
-#define FTR_ENTRY_OFFSET	.long 0xffffffff; .long
-#else
-/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
-#define FTR_ENTRY_LONG		PPC_LONG
-#define FTR_ENTRY_OFFSET	PPC_LONG
-#endif
-
-#define START_FTR_SECTION(label)	label##1:
-
-#define FTR_SECTION_ELSE_NESTED(label)			\
-label##2:						\
-	.pushsection __ftr_alt_##label,"a";		\
-	.align 2;					\
-label##3:
-
-#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect)	\
-label##4:						\
-	.popsection;					\
-	.pushsection sect,"a";				\
-	.align 3;					\
-label##5:					       	\
-	FTR_ENTRY_LONG msk;				\
-	FTR_ENTRY_LONG val;				\
-	FTR_ENTRY_OFFSET label##1b-label##5b;		\
-	FTR_ENTRY_OFFSET label##2b-label##5b;	 	\
-	FTR_ENTRY_OFFSET label##3b-label##5b;		\
-	FTR_ENTRY_OFFSET label##4b-label##5b;	 	\
-	.popsection;
-
-
-/* CPU feature dependent sections */
-#define BEGIN_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
-#define BEGIN_FTR_SECTION		START_FTR_SECTION(97)
-
-#define END_FTR_SECTION_NESTED(msk, val, label) 		\
-	FTR_SECTION_ELSE_NESTED(label)				\
-	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
-
-#define END_FTR_SECTION(msk, val)		\
-	END_FTR_SECTION_NESTED(msk, val, 97)
-
-#define END_FTR_SECTION_IFSET(msk)	END_FTR_SECTION((msk), (msk))
-#define END_FTR_SECTION_IFCLR(msk)	END_FTR_SECTION((msk), 0)
-
-/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */
-#define FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
-#define ALT_FTR_SECTION_END_NESTED(msk, val, label)	\
-	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
-#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
-	ALT_FTR_SECTION_END_NESTED(msk, msk, label)
-#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
-	ALT_FTR_SECTION_END_NESTED(msk, 0, label)
-#define ALT_FTR_SECTION_END(msk, val)	\
-	ALT_FTR_SECTION_END_NESTED(msk, val, 97)
-#define ALT_FTR_SECTION_END_IFSET(msk)	\
-	ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97)
-#define ALT_FTR_SECTION_END_IFCLR(msk)	\
-	ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
-
-/* Firmware feature dependent sections */
-#define BEGIN_FW_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
-#define BEGIN_FW_FTR_SECTION			START_FTR_SECTION(97)
-
-#define END_FW_FTR_SECTION_NESTED(msk, val, label) 		\
-	FTR_SECTION_ELSE_NESTED(label)				\
-	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
-
-#define END_FW_FTR_SECTION(msk, val)		\
-	END_FW_FTR_SECTION_NESTED(msk, val, 97)
-
-#define END_FW_FTR_SECTION_IFSET(msk)	END_FW_FTR_SECTION((msk), (msk))
-#define END_FW_FTR_SECTION_IFCLR(msk)	END_FW_FTR_SECTION((msk), 0)
-
-/* Firmware feature sections with alternatives */
-#define FW_FTR_SECTION_ELSE_NESTED(label)	FTR_SECTION_ELSE_NESTED(label)
-#define FW_FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
-#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label)	\
-	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
-#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
-	ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label)
-#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
-	ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label)
-#define ALT_FW_FTR_SECTION_END(msk, val)	\
-	ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97)
-#define ALT_FW_FTR_SECTION_END_IFSET(msk)	\
-	ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97)
-#define ALT_FW_FTR_SECTION_END_IFCLR(msk)	\
-	ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
-
-#endif /* __ASSEMBLY__ */
-
-/* LWSYNC feature sections */
-#define START_LWSYNC_SECTION(label)	label##1:
-#define MAKE_LWSYNC_SECTION_ENTRY(label, sect)		\
-label##2:						\
-	.pushsection sect,"a";				\
-	.align 2;					\
-label##3:					       	\
-	.long label##1b-label##3b;			\
-	.popsection;
-
-#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
deleted file mode 100644
index ef328995ba9d..000000000000
--- a/include/asm-powerpc/firmware.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  Modifications for ppc64:
- *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_POWERPC_FIRMWARE_H
-#define __ASM_POWERPC_FIRMWARE_H
-
-#ifdef __KERNEL__
-
-#include <asm/asm-compat.h>
-#include <asm/feature-fixups.h>
-
-/* firmware feature bitmask values */
-#define FIRMWARE_MAX_FEATURES 63
-
-#define FW_FEATURE_PFT		ASM_CONST(0x0000000000000001)
-#define FW_FEATURE_TCE		ASM_CONST(0x0000000000000002)
-#define FW_FEATURE_SPRG0	ASM_CONST(0x0000000000000004)
-#define FW_FEATURE_DABR		ASM_CONST(0x0000000000000008)
-#define FW_FEATURE_COPY		ASM_CONST(0x0000000000000010)
-#define FW_FEATURE_ASR		ASM_CONST(0x0000000000000020)
-#define FW_FEATURE_DEBUG	ASM_CONST(0x0000000000000040)
-#define FW_FEATURE_TERM		ASM_CONST(0x0000000000000080)
-#define FW_FEATURE_PERF		ASM_CONST(0x0000000000000100)
-#define FW_FEATURE_DUMP		ASM_CONST(0x0000000000000200)
-#define FW_FEATURE_INTERRUPT	ASM_CONST(0x0000000000000400)
-#define FW_FEATURE_MIGRATE	ASM_CONST(0x0000000000000800)
-#define FW_FEATURE_PERFMON	ASM_CONST(0x0000000000001000)
-#define FW_FEATURE_CRQ		ASM_CONST(0x0000000000002000)
-#define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
-#define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
-#define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK		ASM_CONST(0x0000000000020000)
-#define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
-#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
-#define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
-#define FW_FEATURE_ISERIES	ASM_CONST(0x0000000000200000)
-#define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
-#define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
-#define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
-
-#ifndef __ASSEMBLY__
-
-enum {
-#ifdef CONFIG_PPC64
-	FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE |
-		FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY |
-		FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM |
-		FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
-		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
-		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
-		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
-		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR,
-	FW_FEATURE_PSERIES_ALWAYS = 0,
-	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
-	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
-	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
-	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
-	FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
-	FW_FEATURE_CELLEB_ALWAYS = 0,
-	FW_FEATURE_NATIVE_POSSIBLE = 0,
-	FW_FEATURE_NATIVE_ALWAYS = 0,
-	FW_FEATURE_POSSIBLE =
-#ifdef CONFIG_PPC_PSERIES
-		FW_FEATURE_PSERIES_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_ISERIES
-		FW_FEATURE_ISERIES_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_PS3
-		FW_FEATURE_PS3_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_CELLEB
-		FW_FEATURE_CELLEB_POSSIBLE |
-#endif
-#ifdef CONFIG_PPC_NATIVE
-		FW_FEATURE_NATIVE_ALWAYS |
-#endif
-		0,
-	FW_FEATURE_ALWAYS =
-#ifdef CONFIG_PPC_PSERIES
-		FW_FEATURE_PSERIES_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_ISERIES
-		FW_FEATURE_ISERIES_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_PS3
-		FW_FEATURE_PS3_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_CELLEB
-		FW_FEATURE_CELLEB_ALWAYS &
-#endif
-#ifdef CONFIG_PPC_NATIVE
-		FW_FEATURE_NATIVE_ALWAYS &
-#endif
-		FW_FEATURE_POSSIBLE,
-
-#else /* CONFIG_PPC64 */
-	FW_FEATURE_POSSIBLE = 0,
-	FW_FEATURE_ALWAYS = 0,
-#endif
-};
-
-/* This is used to identify firmware features which are available
- * to the kernel.
- */
-extern unsigned long	powerpc_firmware_features;
-
-#define firmware_has_feature(feature)					\
-	((FW_FEATURE_ALWAYS & (feature)) ||				\
-		(FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature)))
-
-extern void system_reset_fwnmi(void);
-extern void machine_check_fwnmi(void);
-
-/* This is true if we are using the firmware NMI handler (typically LPAR) */
-extern int fwnmi_active;
-
-extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/include/asm-powerpc/fixmap.h b/include/asm-powerpc/fixmap.h
deleted file mode 100644
index 8428b38a3d30..000000000000
--- a/include/asm-powerpc/fixmap.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Copyright 2008 Freescale Semiconductor Inc.
- *   Port to powerpc added by Kumar Gala
- */
-
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-extern unsigned long FIXADDR_TOP;
-
-#ifndef __ASSEMBLY__
-#include <linux/kernel.h>
-#include <asm/page.h>
-#ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#endif
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special addresses
- * from the end of virtual memory (0xfffff000) backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-enum fixed_addresses {
-	FIX_HOLE,
-#ifdef CONFIG_HIGHMEM
-	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#endif
-	/* FIX_PCIE_MCFG, */
-	__end_of_fixed_addresses
-};
-
-extern void __set_fixmap (enum fixed_addresses idx,
-					phys_addr_t phys, pgprot_t flags);
-
-#define set_fixmap(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL)
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-
-#define clear_fixmap(idx) \
-		__set_fixmap(idx, 0, __pgprot(0))
-
-#define __FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
-
-#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without tranlation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static __always_inline unsigned long fix_to_virt(const unsigned int idx)
-{
-	/*
-	 * this branch gets completely eliminated after inlining,
-	 * except when someone tries to use fixaddr indices in an
-	 * illegal way. (such as mixing up address types or using
-	 * out-of-range indices).
-	 *
-	 * If it doesn't get removed, the linker will complain
-	 * loudly with a reasonably clear error message..
-	 */
-	if (idx >= __end_of_fixed_addresses)
-		__this_fixmap_does_not_exist();
-
-        return __fix_to_virt(idx);
-}
-
-static inline unsigned long virt_to_fix(const unsigned long vaddr)
-{
-	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
-	return __virt_to_fix(vaddr);
-}
-
-#endif /* !__ASSEMBLY__ */
-#endif
diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h
deleted file mode 100644
index 24bd34c57e9d..000000000000
--- a/include/asm-powerpc/floppy.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_POWERPC_FLOPPY_H
-#define __ASM_POWERPC_FLOPPY_H
-#ifdef __KERNEL__
-
-#include <asm/machdep.h>
-
-#define fd_inb(port)		inb_p(port)
-#define fd_outb(value,port)	outb_p(value,port)
-
-#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
-#define fd_disable_dma()	 fd_ops->_disable_dma(FLOPPY_DMA)
-#define fd_free_dma()           fd_ops->_free_dma(FLOPPY_DMA)
-#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
-#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA, mode)
-#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
-#define fd_get_dma_residue()    fd_ops->_get_dma_residue(FLOPPY_DMA)
-#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
-#define fd_cacheflush(addr,size) /* nothing */
-#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
-
-#include <linux/pci.h>
-#include <asm/ppc-pci.h>	/* for isa_bridge_pcidev */
-
-#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
-
-static int fd_request_dma(void);
-
-struct fd_dma_ops {
-	void (*_disable_dma)(unsigned int dmanr);
-	void (*_free_dma)(unsigned int dmanr);
-	int (*_get_dma_residue)(unsigned int dummy);
-	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-};
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_vdma;
-static struct fd_dma_ops *fd_ops;
-
-static irqreturn_t floppy_hardint(int irq, void *dev_id)
-{
-	unsigned char st;
-	int lcount;
-	char *lptr;
-
-	if (!doing_vdma)
-		return floppy_interrupt(irq, dev_id);
-
-
-	st = 1;
-	for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
-	     lcount; lcount--, lptr++) {
-		st=inb(virtual_dma_port+4) & 0xa0 ;
-		if (st != 0xa0)
-			break;
-		if (virtual_dma_mode)
-			outb_p(*lptr, virtual_dma_port+5);
-		else
-			*lptr = inb_p(virtual_dma_port+5);
-	}
-	virtual_dma_count = lcount;
-	virtual_dma_addr = lptr;
-	st = inb(virtual_dma_port+4);
-
-	if (st == 0x20)
-		return IRQ_HANDLED;
-	if (!(st & 0x20)) {
-		virtual_dma_residue += virtual_dma_count;
-		virtual_dma_count=0;
-		doing_vdma = 0;
-		floppy_interrupt(irq, dev_id);
-		return IRQ_HANDLED;
-	}
-	return IRQ_HANDLED;
-}
-
-static void vdma_disable_dma(unsigned int dummy)
-{
-	doing_vdma = 0;
-	virtual_dma_residue += virtual_dma_count;
-	virtual_dma_count=0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
-	return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
-	if (can_use_virtual_dma)
-		return request_irq(FLOPPY_IRQ, floppy_hardint,
-				   IRQF_DISABLED, "floppy", NULL);
-	else
-		return request_irq(FLOPPY_IRQ, floppy_interrupt,
-				   IRQF_DISABLED, "floppy", NULL);
-}
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-	doing_vdma = 1;
-	virtual_dma_port = io;
-	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
-	virtual_dma_addr = addr;
-	virtual_dma_count = size;
-	virtual_dma_residue = 0;
-	return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-	static unsigned long prev_size;
-	static dma_addr_t bus_addr = 0;
-	static char *prev_addr;
-	static int prev_dir;
-	int dir;
-
-	doing_vdma = 0;
-	dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
-
-	if (bus_addr 
-	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
-		/* different from last time -- unmap prev */
-		pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir);
-		bus_addr = 0;
-	}
-
-	if (!bus_addr)	/* need to map it */
-		bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir);
-
-	/* remember this one as prev */
-	prev_addr = addr;
-	prev_size = size;
-	prev_dir = dir;
-
-	fd_clear_dma_ff();
-	fd_cacheflush(addr, size);
-	fd_set_dma_mode(mode);
-	set_dma_addr(FLOPPY_DMA, bus_addr);
-	fd_set_dma_count(size);
-	virtual_dma_port = io;
-	fd_enable_dma();
-
-	return 0;
-}
-
-static struct fd_dma_ops real_dma_ops =
-{
-	._disable_dma = disable_dma,
-	._free_dma = free_dma,
-	._get_dma_residue = get_dma_residue,
-	._dma_setup = hard_dma_setup
-};
-
-static struct fd_dma_ops virt_dma_ops =
-{
-	._disable_dma = vdma_disable_dma,
-	._free_dma = vdma_nop,
-	._get_dma_residue = vdma_get_dma_residue,
-	._dma_setup = vdma_dma_setup
-};
-
-static int fd_request_dma(void)
-{
-	if (can_use_virtual_dma & 1) {
-		fd_ops = &virt_dma_ops;
-		return 0;
-	}
-	else {
-		fd_ops = &real_dma_ops;
-		return request_dma(FLOPPY_DMA, "floppy");
-	}
-}
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Again, the CMOS information not available
- */
-#define FLOPPY0_TYPE 6
-#define FLOPPY1_TYPE 0
-
-#define N_FDC 2			/* Don't change this! */
-#define N_DRIVE 8
-
-/*
- * The PowerPC has no problems with floppy DMA crossing 64k borders.
- */
-#define CROSS_64KB(a,s)	(0)
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_FLOPPY_H */
diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h
deleted file mode 100644
index 9361cd5342cc..000000000000
--- a/include/asm-powerpc/fs_pd.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Platform information definitions.
- *
- * 2006 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef FS_PD_H
-#define FS_PD_H
-#include <sysdev/fsl_soc.h>
-#include <asm/time.h>
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-
-#if defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#endif
-
-#define cpm2_map(member) (&cpm2_immr->member)
-#define cpm2_map_size(member, size) (&cpm2_immr->member)
-#define cpm2_unmap(addr) do {} while(0)
-#endif
-
-#ifdef CONFIG_8xx
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-
-extern immap_t __iomem *mpc8xx_immr;
-
-#define immr_map(member) (&mpc8xx_immr->member)
-#define immr_map_size(member, size) (&mpc8xx_immr->member)
-#define immr_unmap(addr) do {} while (0)
-#endif
-
-static inline int uart_baudrate(void)
-{
-        return get_baudrate();
-}
-
-static inline int uart_clock(void)
-{
-        return ppc_proc_freq;
-}
-
-#endif
diff --git a/include/asm-powerpc/fsl_gtm.h b/include/asm-powerpc/fsl_gtm.h
deleted file mode 100644
index 8e8c9b5032d3..000000000000
--- a/include/asm-powerpc/fsl_gtm.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Freescale General-purpose Timers Module
- *
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
- *               Shlomi Gridish <gridish@freescale.com>
- *               Jerry Huang <Chang-Ming.Huang@freescale.com>
- * Copyright (c) MontaVista Software, Inc. 2008.
- *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_FSL_GTM_H
-#define __ASM_FSL_GTM_H
-
-#include <linux/types.h>
-
-struct gtm;
-
-struct gtm_timer {
-	unsigned int irq;
-
-	struct gtm *gtm;
-	bool requested;
-	u8 __iomem *gtcfr;
-	__be16 __iomem *gtmdr;
-	__be16 __iomem *gtpsr;
-	__be16 __iomem *gtcnr;
-	__be16 __iomem *gtrfr;
-	__be16 __iomem *gtevr;
-};
-
-extern struct gtm_timer *gtm_get_timer16(void);
-extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
-						  unsigned int timer);
-extern void gtm_put_timer16(struct gtm_timer *tmr);
-extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec,
-			     bool reload);
-extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec,
-				 bool reload);
-extern void gtm_stop_timer16(struct gtm_timer *tmr);
-extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events);
-
-#endif /* __ASM_FSL_GTM_H */
diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h
deleted file mode 100644
index 303f5484c050..000000000000
--- a/include/asm-powerpc/fsl_lbc.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/* Freescale Local Bus Controller
- *
- * Copyright (c) 2006-2007 Freescale Semiconductor
- *
- * Authors: Nick Spence <nick.spence@freescale.com>,
- *          Scott Wood <scottwood@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_FSL_LBC_H
-#define __ASM_FSL_LBC_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-
-struct fsl_lbc_bank {
-	__be32 br;             /**< Base Register  */
-#define BR_BA           0xFFFF8000
-#define BR_BA_SHIFT             15
-#define BR_PS           0x00001800
-#define BR_PS_SHIFT             11
-#define BR_PS_8         0x00000800  /* Port Size 8 bit */
-#define BR_PS_16        0x00001000  /* Port Size 16 bit */
-#define BR_PS_32        0x00001800  /* Port Size 32 bit */
-#define BR_DECC         0x00000600
-#define BR_DECC_SHIFT            9
-#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
-#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
-#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
-#define BR_WP           0x00000100
-#define BR_WP_SHIFT              8
-#define BR_MSEL         0x000000E0
-#define BR_MSEL_SHIFT            5
-#define BR_MS_GPCM      0x00000000  /* GPCM */
-#define BR_MS_FCM       0x00000020  /* FCM */
-#define BR_MS_SDRAM     0x00000060  /* SDRAM */
-#define BR_MS_UPMA      0x00000080  /* UPMA */
-#define BR_MS_UPMB      0x000000A0  /* UPMB */
-#define BR_MS_UPMC      0x000000C0  /* UPMC */
-#define BR_V            0x00000001
-#define BR_V_SHIFT               0
-#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
-
-	__be32 or;             /**< Base Register  */
-#define OR0 0x5004
-#define OR1 0x500C
-#define OR2 0x5014
-#define OR3 0x501C
-#define OR4 0x5024
-#define OR5 0x502C
-#define OR6 0x5034
-#define OR7 0x503C
-
-#define OR_FCM_AM               0xFFFF8000
-#define OR_FCM_AM_SHIFT                 15
-#define OR_FCM_BCTLD            0x00001000
-#define OR_FCM_BCTLD_SHIFT              12
-#define OR_FCM_PGS              0x00000400
-#define OR_FCM_PGS_SHIFT                10
-#define OR_FCM_CSCT             0x00000200
-#define OR_FCM_CSCT_SHIFT                9
-#define OR_FCM_CST              0x00000100
-#define OR_FCM_CST_SHIFT                 8
-#define OR_FCM_CHT              0x00000080
-#define OR_FCM_CHT_SHIFT                 7
-#define OR_FCM_SCY              0x00000070
-#define OR_FCM_SCY_SHIFT                 4
-#define OR_FCM_SCY_1            0x00000010
-#define OR_FCM_SCY_2            0x00000020
-#define OR_FCM_SCY_3            0x00000030
-#define OR_FCM_SCY_4            0x00000040
-#define OR_FCM_SCY_5            0x00000050
-#define OR_FCM_SCY_6            0x00000060
-#define OR_FCM_SCY_7            0x00000070
-#define OR_FCM_RST              0x00000008
-#define OR_FCM_RST_SHIFT                 3
-#define OR_FCM_TRLX             0x00000004
-#define OR_FCM_TRLX_SHIFT                2
-#define OR_FCM_EHTR             0x00000002
-#define OR_FCM_EHTR_SHIFT                1
-};
-
-struct fsl_lbc_regs {
-	struct fsl_lbc_bank bank[8];
-	u8 res0[0x28];
-	__be32 mar;             /**< UPM Address Register */
-	u8 res1[0x4];
-	__be32 mamr;            /**< UPMA Mode Register */
-#define MxMR_OP_NO	(0 << 28) /**< normal operation */
-#define MxMR_OP_WA	(1 << 28) /**< write array */
-#define MxMR_OP_RA	(2 << 28) /**< read array */
-#define MxMR_OP_RP	(3 << 28) /**< run pattern */
-#define MxMR_MAD	0x3f      /**< machine address */
-	__be32 mbmr;            /**< UPMB Mode Register */
-	__be32 mcmr;            /**< UPMC Mode Register */
-	u8 res2[0x8];
-	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
-	__be32 mdr;             /**< UPM Data Register */
-	u8 res3[0x4];
-	__be32 lsor;            /**< Special Operation Initiation Register */
-	__be32 lsdmr;           /**< SDRAM Mode Register */
-	u8 res4[0x8];
-	__be32 lurt;            /**< UPM Refresh Timer */
-	__be32 lsrt;            /**< SDRAM Refresh Timer */
-	u8 res5[0x8];
-	__be32 ltesr;           /**< Transfer Error Status Register */
-#define LTESR_BM   0x80000000
-#define LTESR_FCT  0x40000000
-#define LTESR_PAR  0x20000000
-#define LTESR_WP   0x04000000
-#define LTESR_ATMW 0x00800000
-#define LTESR_ATMR 0x00400000
-#define LTESR_CS   0x00080000
-#define LTESR_CC   0x00000001
-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
-	__be32 ltedr;           /**< Transfer Error Disable Register */
-	__be32 lteir;           /**< Transfer Error Interrupt Register */
-	__be32 lteatr;          /**< Transfer Error Attributes Register */
-	__be32 ltear;           /**< Transfer Error Address Register */
-	u8 res6[0xC];
-	__be32 lbcr;            /**< Configuration Register */
-#define LBCR_LDIS  0x80000000
-#define LBCR_LDIS_SHIFT    31
-#define LBCR_BCTLC 0x00C00000
-#define LBCR_BCTLC_SHIFT   22
-#define LBCR_AHD   0x00200000
-#define LBCR_LPBSE 0x00020000
-#define LBCR_LPBSE_SHIFT   17
-#define LBCR_EPAR  0x00010000
-#define LBCR_EPAR_SHIFT    16
-#define LBCR_BMT   0x0000FF00
-#define LBCR_BMT_SHIFT      8
-#define LBCR_INIT  0x00040000
-	__be32 lcrr;            /**< Clock Ratio Register */
-#define LCRR_DBYP    0x80000000
-#define LCRR_DBYP_SHIFT      31
-#define LCRR_BUFCMDC 0x30000000
-#define LCRR_BUFCMDC_SHIFT   28
-#define LCRR_ECL     0x03000000
-#define LCRR_ECL_SHIFT       24
-#define LCRR_EADC    0x00030000
-#define LCRR_EADC_SHIFT      16
-#define LCRR_CLKDIV  0x0000000F
-#define LCRR_CLKDIV_SHIFT     0
-	u8 res7[0x8];
-	__be32 fmr;             /**< Flash Mode Register */
-#define FMR_CWTO     0x0000F000
-#define FMR_CWTO_SHIFT       12
-#define FMR_BOOT     0x00000800
-#define FMR_ECCM     0x00000100
-#define FMR_AL       0x00000030
-#define FMR_AL_SHIFT          4
-#define FMR_OP       0x00000003
-#define FMR_OP_SHIFT          0
-	__be32 fir;             /**< Flash Instruction Register */
-#define FIR_OP0      0xF0000000
-#define FIR_OP0_SHIFT        28
-#define FIR_OP1      0x0F000000
-#define FIR_OP1_SHIFT        24
-#define FIR_OP2      0x00F00000
-#define FIR_OP2_SHIFT        20
-#define FIR_OP3      0x000F0000
-#define FIR_OP3_SHIFT        16
-#define FIR_OP4      0x0000F000
-#define FIR_OP4_SHIFT        12
-#define FIR_OP5      0x00000F00
-#define FIR_OP5_SHIFT         8
-#define FIR_OP6      0x000000F0
-#define FIR_OP6_SHIFT         4
-#define FIR_OP7      0x0000000F
-#define FIR_OP7_SHIFT         0
-#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
-#define FIR_OP_CA    0x1        /* Issue current column address */
-#define FIR_OP_PA    0x2        /* Issue current block+page address */
-#define FIR_OP_UA    0x3        /* Issue user defined address */
-#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
-#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
-#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
-#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
-#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
-#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
-#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
-#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
-#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
-#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
-#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
-#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
-	__be32 fcr;             /**< Flash Command Register */
-#define FCR_CMD0     0xFF000000
-#define FCR_CMD0_SHIFT       24
-#define FCR_CMD1     0x00FF0000
-#define FCR_CMD1_SHIFT       16
-#define FCR_CMD2     0x0000FF00
-#define FCR_CMD2_SHIFT        8
-#define FCR_CMD3     0x000000FF
-#define FCR_CMD3_SHIFT        0
-	__be32 fbar;            /**< Flash Block Address Register */
-#define FBAR_BLK     0x00FFFFFF
-	__be32 fpar;            /**< Flash Page Address Register */
-#define FPAR_SP_PI   0x00007C00
-#define FPAR_SP_PI_SHIFT     10
-#define FPAR_SP_MS   0x00000200
-#define FPAR_SP_CI   0x000001FF
-#define FPAR_SP_CI_SHIFT      0
-#define FPAR_LP_PI   0x0003F000
-#define FPAR_LP_PI_SHIFT     12
-#define FPAR_LP_MS   0x00000800
-#define FPAR_LP_CI   0x000007FF
-#define FPAR_LP_CI_SHIFT      0
-	__be32 fbcr;            /**< Flash Byte Count Register */
-#define FBCR_BC      0x00000FFF
-	u8 res11[0x8];
-	u8 res8[0xF00];
-};
-
-extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
-extern spinlock_t fsl_lbc_lock;
-
-/*
- * FSL UPM routines
- */
-struct fsl_upm {
-	__be32 __iomem *mxmr;
-	int width;
-};
-
-extern int fsl_lbc_find(phys_addr_t addr_base);
-extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
-
-/**
- * fsl_upm_start_pattern - start UPM patterns execution
- * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
- * @pat_offset:	UPM pattern offset for the command to be executed
- *
- * This routine programmes UPM so the next memory access that hits an UPM
- * will trigger pattern execution, starting at pat_offset.
- */
-static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
-{
-	clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
-}
-
-/**
- * fsl_upm_end_pattern - end UPM patterns execution
- * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
- *
- * This routine reverts UPM to normal operation mode.
- */
-static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
-{
-	clrbits32(upm->mxmr, MxMR_OP_RP);
-
-	while (in_be32(upm->mxmr) & MxMR_OP_RP)
-		cpu_relax();
-}
-
-/**
- * fsl_upm_run_pattern - actually run an UPM pattern
- * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
- * @io_base:	remapped pointer to where memory access should happen
- * @mar:	MAR register content during pattern execution
- *
- * This function triggers dummy write to the memory specified by the io_base,
- * thus UPM pattern actually executed. Note that mar usage depends on the
- * pre-programmed AMX bits in the UPM RAM.
- */
-static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
-				      void __iomem *io_base, u32 mar)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&fsl_lbc_lock, flags);
-
-	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
-
-	switch (upm->width) {
-	case 8:
-		out_8(io_base, 0x0);
-		break;
-	case 16:
-		out_be16(io_base, 0x0);
-		break;
-	case 32:
-		out_be32(io_base, 0x0);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
-
-	return ret;
-}
-
-#endif /* __ASM_FSL_LBC_H */
diff --git a/include/asm-powerpc/ftrace.h b/include/asm-powerpc/ftrace.h
deleted file mode 100644
index de921326cca8..000000000000
--- a/include/asm-powerpc/ftrace.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_POWERPC_FTRACE
-#define _ASM_POWERPC_FTRACE
-
-#ifdef CONFIG_FTRACE
-#define MCOUNT_ADDR		((long)(_mcount))
-#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
-
-#ifndef __ASSEMBLY__
-extern void _mcount(void);
-#endif
-
-#endif
-
-#endif /* _ASM_POWERPC_FTRACE */
diff --git a/include/asm-powerpc/futex.h b/include/asm-powerpc/futex.h
deleted file mode 100644
index 6d406c5c5de4..000000000000
--- a/include/asm-powerpc/futex.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _ASM_POWERPC_FUTEX_H
-#define _ASM_POWERPC_FUTEX_H
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-#include <asm/synch.h>
-#include <asm/asm-compat.h>
-
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
-  __asm__ __volatile ( \
-	LWSYNC_ON_SMP \
-"1:	lwarx	%0,0,%2\n" \
-	insn \
-	PPC405_ERR77(0, %2) \
-"2:	stwcx.	%1,0,%2\n" \
-	"bne-	1b\n" \
-	"li	%1,0\n" \
-"3:	.section .fixup,\"ax\"\n" \
-"4:	li	%1,%3\n" \
-	"b	3b\n" \
-	".previous\n" \
-	".section __ex_table,\"a\"\n" \
-	".align 3\n" \
-	PPC_LONG "1b,4b,2b,4b\n" \
-	".previous" \
-	: "=&r" (oldval), "=&r" (ret) \
-	: "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
-	: "cr0", "memory")
-
-static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
-	int prev;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-        __asm__ __volatile__ (
-        LWSYNC_ON_SMP
-"1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
-        cmpw    0,%0,%3\n\
-        bne-    3f\n"
-        PPC405_ERR77(0,%2)
-"2:     stwcx.  %4,0,%2\n\
-        bne-    1b\n"
-        ISYNC_ON_SMP
-"3:	.section .fixup,\"ax\"\n\
-4:	li	%0,%5\n\
-	b	3b\n\
-	.previous\n\
-	.section __ex_table,\"a\"\n\
-	.align 3\n\
-	" PPC_LONG "1b,4b,2b,4b\n\
-	.previous" \
-        : "=&r" (prev), "+m" (*uaddr)
-        : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
-        : "cc", "memory");
-
-        return prev;
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_FUTEX_H */
diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h
deleted file mode 100644
index 77ad3a890f30..000000000000
--- a/include/asm-powerpc/gpio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Generic GPIO API implementation for PowerPC.
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_POWERPC_GPIO_H
-#define __ASM_POWERPC_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_HAVE_GPIO_LIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-/*
- * Not implemented, yet.
- */
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_HAVE_GPIO_LIB */
-
-#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/include/asm-powerpc/grackle.h b/include/asm-powerpc/grackle.h
deleted file mode 100644
index bd7812a519d4..000000000000
--- a/include/asm-powerpc/grackle.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_POWERPC_GRACKLE_H
-#define _ASM_POWERPC_GRACKLE_H
-#ifdef __KERNEL__
-/*
- * Functions for setting up and using a MPC106 northbridge
- */
-
-#include <asm/pci-bridge.h>
-
-extern void setup_grackle(struct pci_controller *hose);
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_GRACKLE_H */
diff --git a/include/asm-powerpc/hardirq.h b/include/asm-powerpc/hardirq.h
deleted file mode 100644
index 288e14d53b7f..000000000000
--- a/include/asm-powerpc/hardirq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _ASM_POWERPC_HARDIRQ_H
-#define _ASM_POWERPC_HARDIRQ_H
-#ifdef __KERNEL__
-
-#include <asm/irq.h>
-#include <asm/bug.h>
-
-/* The __last_jiffy_stamp field is needed to ensure that no decrementer
- * interrupt is lost on SMP machines. Since on most CPUs it is in the same
- * cache line as local_irq_count, it is cheap to access and is also used on UP
- * for uniformity.
- */
-typedef struct {
-	unsigned int __softirq_pending;	/* set_bit is used on this */
-	unsigned int __last_jiffy_stamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
-
-static inline void ack_bad_irq(int irq)
-{
-	printk(KERN_CRIT "illegal vector %d received!\n", irq);
-	BUG();
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HARDIRQ_H */
diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h
deleted file mode 100644
index 93f54958a9d1..000000000000
--- a/include/asm-powerpc/heathrow.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _ASM_POWERPC_HEATHROW_H
-#define _ASM_POWERPC_HEATHROW_H
-#ifdef __KERNEL__
-/*
- * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
- *
- * Grabbed from Open Firmware definitions on a PowerBook G3 Series
- *
- * Copyright (C) 1997 Paul Mackerras.
- */
-
-/* Front light color on Yikes/B&W G3. 32 bits */
-#define HEATHROW_FRONT_LIGHT		0x32 /* (set to 0 or 0xffffffff) */
-
-/* Brightness/contrast (gossamer iMac ?). 8 bits */
-#define HEATHROW_BRIGHTNESS_CNTL	0x32
-#define HEATHROW_CONTRAST_CNTL		0x33
-
-/* offset from ohare base for feature control register */
-#define HEATHROW_MBCR			0x34	/* Media bay control */
-#define HEATHROW_FCR			0x38	/* Feature control */
-#define HEATHROW_AUX_CNTL_REG		0x3c	/* Aux control */
-
-/*
- * Bits in feature control register.
- * Bits postfixed with a _N are in inverse logic
- */
-#define HRW_SCC_TRANS_EN_N	0x00000001	/* Also controls modem power */
-#define HRW_BAY_POWER_N		0x00000002
-#define HRW_BAY_PCI_ENABLE	0x00000004
-#define HRW_BAY_IDE_ENABLE	0x00000008
-#define HRW_BAY_FLOPPY_ENABLE	0x00000010
-#define HRW_IDE0_ENABLE		0x00000020
-#define HRW_IDE0_RESET_N	0x00000040
-#define HRW_BAY_DEV_MASK	0x0000001c
-#define HRW_BAY_RESET_N		0x00000080
-#define HRW_IOBUS_ENABLE	0x00000100	/* Internal IDE ? */
-#define HRW_SCC_ENABLE		0x00000200
-#define HRW_MESH_ENABLE		0x00000400
-#define HRW_SWIM_ENABLE		0x00000800
-#define HRW_SOUND_POWER_N	0x00001000
-#define HRW_SOUND_CLK_ENABLE	0x00002000
-#define HRW_SCCA_IO		0x00004000
-#define HRW_SCCB_IO		0x00008000
-#define HRW_PORT_OR_DESK_VIA_N	0x00010000	/* This one is 0 on PowerBook */
-#define HRW_PWM_MON_ID_N	0x00020000	/* ??? (0) */
-#define HRW_HOOK_MB_CNT_N	0x00040000	/* ??? (0) */
-#define HRW_SWIM_CLONE_FLOPPY	0x00080000	/* ??? (0) */
-#define HRW_AUD_RUN22		0x00100000	/* ??? (1) */
-#define HRW_SCSI_LINK_MODE	0x00200000	/* Read ??? (1) */
-#define HRW_ARB_BYPASS		0x00400000	/* Disable internal PCI arbitrer */
-#define HRW_IDE1_RESET_N	0x00800000	/* Media bay */
-#define HRW_SLOW_SCC_PCLK	0x01000000	/* ??? (0) */
-#define HRW_RESET_SCC		0x02000000
-#define HRW_MFDC_CELL_ENABLE	0x04000000	/* ??? (0) */
-#define HRW_USE_MFDC		0x08000000	/* ??? (0) */
-#define HRW_BMAC_IO_ENABLE	0x60000000	/* two bits, not documented in OF */
-#define HRW_BMAC_RESET		0x80000000	/* not documented in OF */
-
-/* We OR those features at boot on desktop G3s */
-#define HRW_DEFAULTS		(HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
-
-/* Looks like Heathrow has some sort of GPIOs as well... */
-#define HRW_GPIO_MODEM_RESET	0x6d
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HEATHROW_H */
diff --git a/include/asm-powerpc/highmem.h b/include/asm-powerpc/highmem.h
deleted file mode 100644
index 5d99b6489d56..000000000000
--- a/include/asm-powerpc/highmem.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * highmem.h: virtual kernel memory mappings for high memory
- *
- * PowerPC version, stolen from the i386 version.
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- *		      Gerhard.Wichert@pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/kmap_types.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-#include <asm/fixmap.h>
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-#define LAST_PKMAP 	(1 << PTE_SHIFT)
-#define LAST_PKMAP_MASK (LAST_PKMAP-1)
-#define PKMAP_BASE	((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
-#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-static inline void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-
-static inline void kunmap(struct page *page)
-{
-	BUG_ON(in_interrupt());
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
-	unsigned int idx;
-	unsigned long vaddr;
-
-	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
-	set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
-	flush_tlb_page(NULL, vaddr);
-
-	return (void*) vaddr;
-}
-
-static inline void *kmap_atomic(struct page *page, enum km_type type)
-{
-	return kmap_atomic_prot(page, type, kmap_prot);
-}
-
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
-	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
-	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-		pagefault_enable();
-		return;
-	}
-
-	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
-	/*
-	 * force other mappings to Oops if they'll try to access
-	 * this pte without first remap it
-	 */
-	pte_clear(&init_mm, vaddr, kmap_pte-idx);
-	flush_tlb_page(NULL, vaddr);
-#endif
-	pagefault_enable();
-}
-
-static inline struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long idx, vaddr = (unsigned long) ptr;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-
-#define flush_cache_kmaps()	flush_cache_all()
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
deleted file mode 100644
index be32ff02f4a0..000000000000
--- a/include/asm-powerpc/hugetlb.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _ASM_POWERPC_HUGETLB_H
-#define _ASM_POWERPC_HUGETLB_H
-
-#include <asm/page.h>
-
-
-int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
-			   unsigned long len);
-
-void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
-			    unsigned long end, unsigned long floor,
-			    unsigned long ceiling);
-
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-		     pte_t *ptep, pte_t pte);
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep);
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
-{
-	if (len & ~HPAGE_MASK)
-		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
-		return -EINVAL;
-	return 0;
-}
-
-static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
-{
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long addr, pte_t *ptep)
-{
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
-	return pte_none(pte);
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
-	return pte_wrprotect(pte);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
-					     unsigned long addr, pte_t *ptep,
-					     pte_t pte, int dirty)
-{
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
-	return *ptep;
-}
-
-static inline int arch_prepare_hugepage(struct page *page)
-{
-	return 0;
-}
-
-static inline void arch_release_hugepage(struct page *page)
-{
-}
-
-#endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
deleted file mode 100644
index bf6cd7cb996c..000000000000
--- a/include/asm-powerpc/hvcall.h
+++ /dev/null
@@ -1,275 +0,0 @@
-#ifndef _ASM_POWERPC_HVCALL_H
-#define _ASM_POWERPC_HVCALL_H
-#ifdef __KERNEL__
-
-#define HVSC			.long 0x44000022
-
-#define H_SUCCESS	0
-#define H_BUSY		1	/* Hardware busy -- retry later */
-#define H_CLOSED	2	/* Resource closed */
-#define H_NOT_AVAILABLE 3
-#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
-#define H_PARTIAL       5
-#define H_IN_PROGRESS	14	/* Kind of like busy */
-#define H_PAGE_REGISTERED 15
-#define H_PARTIAL_STORE   16
-#define H_PENDING	17	/* returned from H_POLL_PENDING */
-#define H_CONTINUE	18	/* Returned from H_Join on success */
-#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
-#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
-						 is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
-						 is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
-						 is a good time to retry */
-#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
-						 is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
-						 is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
-						 is a good time to retry */
-#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
-#define H_HARDWARE	-1	/* Hardware error */
-#define H_FUNCTION	-2	/* Function not supported */
-#define H_PRIVILEGE	-3	/* Caller not privileged */
-#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
-#define H_BAD_MODE	-5	/* Illegal msr value */
-#define H_PTEG_FULL	-6	/* PTEG is full */
-#define H_NOT_FOUND	-7	/* PTE was not found" */
-#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
-#define H_NO_MEM	-9
-#define H_AUTHORITY	-10
-#define H_PERMISSION	-11
-#define H_DROPPED	-12
-#define H_SOURCE_PARM	-13
-#define H_DEST_PARM	-14
-#define H_REMOTE_PARM	-15
-#define H_RESOURCE	-16
-#define H_ADAPTER_PARM  -17
-#define H_RH_PARM       -18
-#define H_RCQ_PARM      -19
-#define H_SCQ_PARM      -20
-#define H_EQ_PARM       -21
-#define H_RT_PARM       -22
-#define H_ST_PARM       -23
-#define H_SIGT_PARM     -24
-#define H_TOKEN_PARM    -25
-#define H_MLENGTH_PARM  -27
-#define H_MEM_PARM      -28
-#define H_MEM_ACCESS_PARM -29
-#define H_ATTR_PARM     -30
-#define H_PORT_PARM     -31
-#define H_MCG_PARM      -32
-#define H_VL_PARM       -33
-#define H_TSIZE_PARM    -34
-#define H_TRACE_PARM    -35
-
-#define H_MASK_PARM     -37
-#define H_MCG_FULL      -38
-#define H_ALIAS_EXIST   -39
-#define H_P_COUNTER     -40
-#define H_TABLE_FULL    -41
-#define H_ALT_TABLE     -42
-#define H_MR_CONDITION  -43
-#define H_NOT_ENOUGH_RESOURCES -44
-#define H_R_STATE       -45
-#define H_RESCINDEND    -46
-
-
-/* Long Busy is a condition that can be returned by the firmware
- * when a call cannot be completed now, but the identical call
- * should be retried later.  This prevents calls blocking in the
- * firmware for long periods of time.  Annoyingly the firmware can return
- * a range of return codes, hinting at how long we should wait before
- * retrying.  If you don't care for the hint, the macro below is a good
- * way to check for the long_busy return codes
- */
-#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
-			     && (x <= H_LONG_BUSY_END_RANGE))
-
-/* Flags */
-#define H_LARGE_PAGE		(1UL<<(63-16))
-#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
-#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
-#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
-#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
-#define H_ANDCOND		(1UL<<(63-33))
-#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
-#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
-#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
-#define H_COPY_PAGE		(1UL<<(63-49))
-#define H_N			(1UL<<(63-61))
-#define H_PP1			(1UL<<(63-62))
-#define H_PP2			(1UL<<(63-63))
-
-/* VASI States */
-#define H_VASI_INVALID          0
-#define H_VASI_ENABLED          1
-#define H_VASI_ABORTED          2
-#define H_VASI_SUSPENDING       3
-#define H_VASI_SUSPENDED        4
-#define H_VASI_RESUMED          5
-#define H_VASI_COMPLETED        6
-
-/* DABRX flags */
-#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
-#define H_DABRX_KERNEL		(1UL<<(63-62))
-#define H_DABRX_USER		(1UL<<(63-63))
-
-/* Each control block has to be on a 4K bondary */
-#define H_CB_ALIGNMENT          4096
-
-/* pSeries hypervisor opcodes */
-#define H_REMOVE		0x04
-#define H_ENTER			0x08
-#define H_READ			0x0c
-#define H_CLEAR_MOD		0x10
-#define H_CLEAR_REF		0x14
-#define H_PROTECT		0x18
-#define H_GET_TCE		0x1c
-#define H_PUT_TCE		0x20
-#define H_SET_SPRG0		0x24
-#define H_SET_DABR		0x28
-#define H_PAGE_INIT		0x2c
-#define H_SET_ASR		0x30
-#define H_ASR_ON		0x34
-#define H_ASR_OFF		0x38
-#define H_LOGICAL_CI_LOAD	0x3c
-#define H_LOGICAL_CI_STORE	0x40
-#define H_LOGICAL_CACHE_LOAD	0x44
-#define H_LOGICAL_CACHE_STORE	0x48
-#define H_LOGICAL_ICBI		0x4c
-#define H_LOGICAL_DCBF		0x50
-#define H_GET_TERM_CHAR		0x54
-#define H_PUT_TERM_CHAR		0x58
-#define H_REAL_TO_LOGICAL	0x5c
-#define H_HYPERVISOR_DATA	0x60
-#define H_EOI			0x64
-#define H_CPPR			0x68
-#define H_IPI			0x6c
-#define H_IPOLL			0x70
-#define H_XIRR			0x74
-#define H_PERFMON		0x7c
-#define H_MIGRATE_DMA		0x78
-#define H_REGISTER_VPA		0xDC
-#define H_CEDE			0xE0
-#define H_CONFER		0xE4
-#define H_PROD			0xE8
-#define H_GET_PPP		0xEC
-#define H_SET_PPP		0xF0
-#define H_PURR			0xF4
-#define H_PIC			0xF8
-#define H_REG_CRQ		0xFC
-#define H_FREE_CRQ		0x100
-#define H_VIO_SIGNAL		0x104
-#define H_SEND_CRQ		0x108
-#define H_COPY_RDMA		0x110
-#define H_REGISTER_LOGICAL_LAN	0x114
-#define H_FREE_LOGICAL_LAN	0x118
-#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
-#define H_SEND_LOGICAL_LAN	0x120
-#define H_BULK_REMOVE		0x124
-#define H_MULTICAST_CTRL	0x130
-#define H_SET_XDABR		0x134
-#define H_STUFF_TCE		0x138
-#define H_PUT_TCE_INDIRECT	0x13C
-#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
-#define H_VTERM_PARTNER_INFO	0x150
-#define H_REGISTER_VTERM	0x154
-#define H_FREE_VTERM		0x158
-#define H_RESET_EVENTS          0x15C
-#define H_ALLOC_RESOURCE        0x160
-#define H_FREE_RESOURCE         0x164
-#define H_MODIFY_QP             0x168
-#define H_QUERY_QP              0x16C
-#define H_REREGISTER_PMR        0x170
-#define H_REGISTER_SMR          0x174
-#define H_QUERY_MR              0x178
-#define H_QUERY_MW              0x17C
-#define H_QUERY_HCA             0x180
-#define H_QUERY_PORT            0x184
-#define H_MODIFY_PORT           0x188
-#define H_DEFINE_AQP1           0x18C
-#define H_GET_TRACE_BUFFER      0x190
-#define H_DEFINE_AQP0           0x194
-#define H_RESIZE_MR             0x198
-#define H_ATTACH_MCQP           0x19C
-#define H_DETACH_MCQP           0x1A0
-#define H_CREATE_RPT            0x1A4
-#define H_REMOVE_RPT            0x1A8
-#define H_REGISTER_RPAGES       0x1AC
-#define H_DISABLE_AND_GETC      0x1B0
-#define H_ERROR_DATA            0x1B4
-#define H_GET_HCA_INFO          0x1B8
-#define H_GET_PERF_COUNT        0x1BC
-#define H_MANAGE_TRACE          0x1C0
-#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
-#define H_QUERY_INT_STATE       0x1E4
-#define H_POLL_PENDING		0x1D8
-#define H_ILLAN_ATTRIBUTES	0x244
-#define H_JOIN			0x298
-#define H_VASI_STATE            0x2A4
-#define H_ENABLE_CRQ		0x2B0
-#define MAX_HCALL_OPCODE	H_ENABLE_CRQ
-
-#ifndef __ASSEMBLY__
-
-/**
- * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
- * @opcode: The hypervisor call to make.
- *
- * This call supports up to 7 arguments and only returns the status of
- * the hcall. Use this version where possible, its slightly faster than
- * the other plpar_hcalls.
- */
-long plpar_hcall_norets(unsigned long opcode, ...);
-
-/**
- * plpar_hcall: - Make a pseries hypervisor call
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 4 return arguments in.
- *
- * This call supports up to 6 arguments and 4 return arguments. Use
- * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
- *
- * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
- */
-#define PLPAR_HCALL_BUFSIZE 4
-long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
-
-/**
- * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 4 return arguments in.
- *
- * This call supports up to 6 arguments and 4 return arguments. Use
- * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
- *
- * Used when phyp interface needs to be called in real mode. Similar to
- * plpar_hcall, but plpar_hcall_raw works in real mode and does not
- * calculate hypervisor call statistics.
- */
-long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
-
-/**
- * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 9 return arguments in.
- *
- * This call supports up to 9 arguments and 9 return arguments. Use
- * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
- */
-#define PLPAR_HCALL9_BUFSIZE 9
-long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
-
-/* For hcall instrumentation.  One structure per-hcall, per-CPU */
-struct hcall_stats {
-	unsigned long	num_calls;	/* number of calls (on this CPU) */
-	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
-	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
-};
-#define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/include/asm-powerpc/hvconsole.h b/include/asm-powerpc/hvconsole.h
deleted file mode 100644
index 35ea69e8121f..000000000000
--- a/include/asm-powerpc/hvconsole.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * hvconsole.h
- * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
- *
- * LPAR console support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _PPC64_HVCONSOLE_H
-#define _PPC64_HVCONSOLE_H
-#ifdef __KERNEL__
-
-/*
- * PSeries firmware will only send/recv up to 16 bytes of character data per
- * hcall.
- */
-#define MAX_VIO_PUT_CHARS	16
-#define SIZE_VIO_GET_CHARS	16
-
-/*
- * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars.  The 'count'
- * parm is included to conform to put_chars() function pointer template
- */
-extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
-extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_HVCONSOLE_H */
diff --git a/include/asm-powerpc/hvcserver.h b/include/asm-powerpc/hvcserver.h
deleted file mode 100644
index 67d7da3a4da4..000000000000
--- a/include/asm-powerpc/hvcserver.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * hvcserver.h
- * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
- *
- * PPC64 virtual I/O console server support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _PPC64_HVCSERVER_H
-#define _PPC64_HVCSERVER_H
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-
-/* Converged Location Code length */
-#define HVCS_CLC_LENGTH	79
-
-/**
- * hvcs_partner_info - an element in a list of partner info
- * @node: list_head denoting this partner_info struct's position in the list of
- *	partner info.
- * @unit_address: The partner unit address of this entry.
- * @partition_ID: The partner partition ID of this entry.
- * @location_code: The converged location code of this entry + 1 char for the
- *	null-term.
- *
- * This structure outlines the format that partner info is presented to a caller
- * of the hvcs partner info fetching functions.  These are strung together into
- * a list using linux kernel lists.
- */
-struct hvcs_partner_info {
-	struct list_head node;
-	uint32_t unit_address;
-	uint32_t partition_ID;
-	char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */
-};
-
-extern int hvcs_free_partner_info(struct list_head *head);
-extern int hvcs_get_partner_info(uint32_t unit_address,
-		struct list_head *head, unsigned long *pi_buff);
-extern int hvcs_register_connection(uint32_t unit_address,
-		uint32_t p_partition_ID, uint32_t p_unit_address);
-extern int hvcs_free_connection(uint32_t unit_address);
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_HVCSERVER_H */
diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h
deleted file mode 100644
index f75a5fc64d2e..000000000000
--- a/include/asm-powerpc/hw_irq.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- */
-#ifndef _ASM_POWERPC_HW_IRQ_H
-#define _ASM_POWERPC_HW_IRQ_H
-
-#ifdef __KERNEL__
-
-#include <linux/errno.h>
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-
-extern void timer_interrupt(struct pt_regs *);
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-
-static inline unsigned long local_get_flags(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__("lbz %0,%1(13)"
-	: "=r" (flags)
-	: "i" (offsetof(struct paca_struct, soft_enabled)));
-
-	return flags;
-}
-
-static inline unsigned long raw_local_irq_disable(void)
-{
-	unsigned long flags, zero;
-
-	__asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)"
-	: "=r" (flags), "=&r" (zero)
-	: "i" (offsetof(struct paca_struct, soft_enabled))
-	: "memory");
-
-	return flags;
-}
-
-extern void raw_local_irq_restore(unsigned long);
-extern void iseries_handle_interrupts(void);
-
-#define raw_local_irq_enable()		raw_local_irq_restore(1)
-#define raw_local_save_flags(flags)	((flags) = local_get_flags())
-#define raw_local_irq_save(flags)	((flags) = raw_local_irq_disable())
-
-#define raw_irqs_disabled()		(local_get_flags() == 0)
-#define raw_irqs_disabled_flags(flags)	((flags) == 0)
-
-#define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
-#define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
-
-#define  hard_irq_disable()			\
-	do {					\
-		__hard_irq_disable();		\
-		get_paca()->soft_enabled = 0;	\
-		get_paca()->hard_enabled = 0;	\
-	} while(0)
-
-static inline int irqs_disabled_flags(unsigned long flags)
-{
-	return flags == 0;
-}
-
-#else
-
-#if defined(CONFIG_BOOKE)
-#define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
-#else
-#define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	mtmsr(flags)
-#endif
-
-static inline void local_irq_disable(void)
-{
-#ifdef CONFIG_BOOKE
-	__asm__ __volatile__("wrteei 0": : :"memory");
-#else
-	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
-	msr = mfmsr();
-	SET_MSR_EE(msr & ~MSR_EE);
-#endif
-}
-
-static inline void local_irq_enable(void)
-{
-#ifdef CONFIG_BOOKE
-	__asm__ __volatile__("wrteei 1": : :"memory");
-#else
-	unsigned long msr;
-	__asm__ __volatile__("": : :"memory");
-	msr = mfmsr();
-	SET_MSR_EE(msr | MSR_EE);
-#endif
-}
-
-static inline void local_irq_save_ptr(unsigned long *flags)
-{
-	unsigned long msr;
-	msr = mfmsr();
-	*flags = msr;
-#ifdef CONFIG_BOOKE
-	__asm__ __volatile__("wrteei 0": : :"memory");
-#else
-	SET_MSR_EE(msr & ~MSR_EE);
-#endif
-	__asm__ __volatile__("": : :"memory");
-}
-
-#define local_save_flags(flags)	((flags) = mfmsr())
-#define local_irq_save(flags)	local_irq_save_ptr(&flags)
-#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
-
-#define hard_irq_enable()	local_irq_enable()
-#define hard_irq_disable()	local_irq_disable()
-
-static inline int irqs_disabled_flags(unsigned long flags)
-{
-	return (flags & MSR_EE) == 0;
-}
-
-#endif /* CONFIG_PPC64 */
-
-/*
- * interrupt-retrigger: should we handle this via lost interrupts and IPIs
- * or should we not care like we do now ? --BenH.
- */
-struct hw_interrupt_type;
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/include/asm-powerpc/hydra.h b/include/asm-powerpc/hydra.h
deleted file mode 100644
index 1ad4eed07fbe..000000000000
--- a/include/asm-powerpc/hydra.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
- *
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is based on the following documentation:
- *
- *	Macintosh Technology in the Common Hardware Reference Platform
- *	Apple Computer, Inc.
- *
- *	© Copyright 1995 Apple Computer, Inc. All rights reserved.
- *
- *  It's available online from http://chrp.apple.com/MacTech.pdf.
- *  You can obtain paper copies of this book from computer bookstores or by
- *  writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
- *  Francisco, CA 94104. Reference ISBN 1-55860-393-X.
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _ASMPPC_HYDRA_H
-#define _ASMPPC_HYDRA_H
-
-#ifdef __KERNEL__
-
-struct Hydra {
-    /* DBDMA Controller Register Space */
-    char Pad1[0x30];
-    u_int CachePD;
-    u_int IDs;
-    u_int Feature_Control;
-    char Pad2[0x7fc4];
-    /* DBDMA Channel Register Space */
-    char SCSI_DMA[0x100];
-    char Pad3[0x300];
-    char SCCA_Tx_DMA[0x100];
-    char SCCA_Rx_DMA[0x100];
-    char SCCB_Tx_DMA[0x100];
-    char SCCB_Rx_DMA[0x100];
-    char Pad4[0x7800];
-    /* Device Register Space */
-    char SCSI[0x1000];
-    char ADB[0x1000];
-    char SCC_Legacy[0x1000];
-    char SCC[0x1000];
-    char Pad9[0x2000];
-    char VIA[0x2000];
-    char Pad10[0x28000];
-    char OpenPIC[0x40000];
-};
-
-extern volatile struct Hydra __iomem *Hydra;
-
-
-    /*
-     *  Feature Control Register
-     */
-
-#define HYDRA_FC_SCC_CELL_EN	0x00000001	/* Enable SCC Clock */
-#define HYDRA_FC_SCSI_CELL_EN	0x00000002	/* Enable SCSI Clock */
-#define HYDRA_FC_SCCA_ENABLE	0x00000004	/* Enable SCC A Lines */
-#define HYDRA_FC_SCCB_ENABLE	0x00000008	/* Enable SCC B Lines */
-#define HYDRA_FC_ARB_BYPASS	0x00000010	/* Bypass Internal Arbiter */
-#define HYDRA_FC_RESET_SCC	0x00000020	/* Reset SCC */
-#define HYDRA_FC_MPIC_ENABLE	0x00000040	/* Enable OpenPIC */
-#define HYDRA_FC_SLOW_SCC_PCLK	0x00000080	/* 1=15.6672, 0=25 MHz */
-#define HYDRA_FC_MPIC_IS_MASTER	0x00000100	/* OpenPIC Master Mode */
-
-
-    /*
-     *  OpenPIC Interrupt Sources
-     */
-
-#define HYDRA_INT_SIO		0
-#define HYDRA_INT_SCSI_DMA	1
-#define HYDRA_INT_SCCA_TX_DMA	2
-#define HYDRA_INT_SCCA_RX_DMA	3
-#define HYDRA_INT_SCCB_TX_DMA	4
-#define HYDRA_INT_SCCB_RX_DMA	5
-#define HYDRA_INT_SCSI		6
-#define HYDRA_INT_SCCA		7
-#define HYDRA_INT_SCCB		8
-#define HYDRA_INT_VIA		9
-#define HYDRA_INT_ADB		10
-#define HYDRA_INT_ADB_NMI	11
-#define HYDRA_INT_EXT1		12	/* PCI IRQW */
-#define HYDRA_INT_EXT2		13	/* PCI IRQX */
-#define HYDRA_INT_EXT3		14	/* PCI IRQY */
-#define HYDRA_INT_EXT4		15	/* PCI IRQZ */
-#define HYDRA_INT_EXT5		16	/* IDE Primay/Secondary */
-#define HYDRA_INT_EXT6		17	/* IDE Secondary */
-#define HYDRA_INT_EXT7		18	/* Power Off Request */
-#define HYDRA_INT_SPARE		19
-
-extern int hydra_init(void);
-extern void macio_adb_init(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASMPPC_HYDRA_H */
diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
deleted file mode 100644
index db1362f8c603..000000000000
--- a/include/asm-powerpc/i8259.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_POWERPC_I8259_H
-#define _ASM_POWERPC_I8259_H
-#ifdef __KERNEL__
-
-#include <linux/irq.h>
-
-#ifdef CONFIG_PPC_MERGE
-extern void i8259_init(struct device_node *node, unsigned long intack_addr);
-extern unsigned int i8259_irq(void);
-extern struct irq_host *i8259_get_host(void);
-#else
-extern void i8259_init(unsigned long intack_addr, int offset);
-extern int i8259_irq(void);
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/ibmebus.h b/include/asm-powerpc/ibmebus.h
deleted file mode 100644
index 1a9d9aea21fa..000000000000
--- a/include/asm-powerpc/ibmebus.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * IBM PowerPC eBus Infrastructure Support.
- *
- * Copyright (c) 2005 IBM Corporation
- *  Joachim Fenkes <fenkes@de.ibm.com>
- *  Heiko J Schick <schickhj@de.ibm.com>
- *
- * All rights reserved.
- *
- * This source code is distributed under a dual license of GPL v2.0 and OpenIB
- * BSD.
- *
- * OpenIB BSD License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
- * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _ASM_EBUS_H
-#define _ASM_EBUS_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/mod_devicetable.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-
-extern struct bus_type ibmebus_bus_type;
-
-int ibmebus_register_driver(struct of_platform_driver *drv);
-void ibmebus_unregister_driver(struct of_platform_driver *drv);
-
-int ibmebus_request_irq(u32 ist, irq_handler_t handler,
-			unsigned long irq_flags, const char *devname,
-			void *dev_id);
-void ibmebus_free_irq(u32 ist, void *dev_id);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_IBMEBUS_H */
diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
deleted file mode 100644
index 3d90bf7d3d73..000000000000
--- a/include/asm-powerpc/ide.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  Copyright (C) 1994-1996 Linus Torvalds & authors
- *
- *  This file contains the powerpc architecture specific IDE code.
- */
-#ifndef _ASM_POWERPC_IDE_H
-#define _ASM_POWERPC_IDE_H
-
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <linux/sched.h>
-#include <asm/mpc8xx.h>
-#endif
-#include <asm/io.h>
-
-#ifndef MAX_HWIFS
-#ifdef __powerpc64__
-#define MAX_HWIFS	10
-#else
-#define MAX_HWIFS	8
-#endif
-#endif
-
-#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
-#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
-#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
-
-#ifndef  __powerpc64__
-#include <linux/hdreg.h>
-#include <linux/ioport.h>
-
-/* FIXME: use ide_platform host driver */
-static __inline__ int ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_PPLUS
-	switch (base) {
-	case 0x1f0:	return 14;
-	case 0x170:	return 15;
-	}
-#endif
-#ifdef CONFIG_PPC_PREP
-	switch (base) {
-	case 0x1f0:	return 13;
-	case 0x170:	return 13;
-	case 0x1e8:	return 11;
-	case 0x168:	return 10;
-	case 0xfff0:	return 14;	/* MCP(N)750 ide0 */
-	case 0xffe0:	return 15;	/* MCP(N)750 ide1 */
-	}
-#endif
-	return 0;
-}
-
-/* FIXME: use ide_platform host driver */
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-#ifdef CONFIG_PPLUS
-	switch (index) {
-	case 0:		return 0x1f0;
-	case 1:		return 0x170;
-	}
-#endif
-#ifdef CONFIG_PPC_PREP
-	switch (index) {
-	case 0:		return 0x1f0;
-	case 1:		return 0x170;
-	case 2:		return 0x1e8;
-	case 3:		return 0x168;
-	}
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
-#define IDE_ARCH_ACK_INTR  1
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-#endif
-
-#endif /* __powerpc64__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h
deleted file mode 100644
index 0f165e59c326..000000000000
--- a/include/asm-powerpc/immap_86xx.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/**
- * MPC86xx Internal Memory Map
- *
- * Authors: Jeff Brown
- *          Timur Tabi <timur@freescale.com>
- *
- * Copyright 2004,2007 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This header file defines structures for various 86xx SOC devices that are
- * used by multiple source files.
- */
-
-#ifndef __ASM_POWERPC_IMMAP_86XX_H__
-#define __ASM_POWERPC_IMMAP_86XX_H__
-#ifdef __KERNEL__
-
-/* Global Utility Registers */
-struct ccsr_guts {
-	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
-	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
-	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
-	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
-	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
-	u8	res1[0x20 - 0x14];
-	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
-	u8	res2[0x30 - 0x24];
-	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
-	u8	res3[0x40 - 0x34];
-	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
-	u8	res4[0x50 - 0x44];
-	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
-	u8	res5[0x60 - 0x54];
-	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
-	u8	res6[0x70 - 0x64];
-	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
-	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
-	u8	res7[0x80 - 0x78];
-	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
-	u8	res8[0x90 - 0x84];
-	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
-	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
-	u8	res9[0xA0 - 0x98];
-	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
-	__be32	svr;		/* 0x.00a4 - System Version Register */
-	u8	res10[0xB0 - 0xA8];
-	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
-	u8	res11[0xC0 - 0xB4];
-	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
-	u8	res12[0x800 - 0xC4];
-	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
-	u8	res13[0x900 - 0x804];
-	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
-	u8	res14[0x908 - 0x904];
-	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
-	u8	res15[0x914 - 0x90C];
-	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
-	u8	res16[0xB20 - 0x918];
-	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
-	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
-	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
-	u8	res17[0xE00 - 0xB2C];
-	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
-	u8	res18[0xE10 - 0xE04];
-	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
-	u8	res19[0xE20 - 0xE14];
-	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
-	u8	res20[0xF04 - 0xE24];
-	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
-	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
-	u8	res21[0xF40 - 0xF0C];
-	__be32	srds2cr0;	/* 0x.0f40 - SerDes1 Control Register 0 */
-	__be32	srds2cr1;	/* 0x.0f44 - SerDes1 Control Register 0 */
-} __attribute__ ((packed));
-
-#define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
-#define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
-
-/*
- * Set the DMACR register in the GUTS
- *
- * The DMACR register determines the source of initiated transfers for each
- * channel on each DMA controller.  Rather than have a bunch of repetitive
- * macros for the bit patterns, we just have a function that calculates
- * them.
- *
- * guts: Pointer to GUTS structure
- * co: The DMA controller (0 or 1)
- * ch: The channel on the DMA controller (0, 1, 2, or 3)
- * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
- */
-static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
-	unsigned int co, unsigned int ch, unsigned int device)
-{
-	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
-
-	clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
-}
-
-#define CCSR_GUTS_PMUXCR_LDPSEL		0x00010000
-#define CCSR_GUTS_PMUXCR_SSI1_MASK	0x0000C000	/* Bitmask for SSI1 */
-#define CCSR_GUTS_PMUXCR_SSI1_LA	0x00000000	/* Latched address */
-#define CCSR_GUTS_PMUXCR_SSI1_HI	0x00004000	/* High impedance */
-#define CCSR_GUTS_PMUXCR_SSI1_SSI	0x00008000	/* Used for SSI1 */
-#define CCSR_GUTS_PMUXCR_SSI2_MASK	0x00003000	/* Bitmask for SSI2 */
-#define CCSR_GUTS_PMUXCR_SSI2_LA	0x00000000	/* Latched address */
-#define CCSR_GUTS_PMUXCR_SSI2_HI	0x00001000	/* High impedance */
-#define CCSR_GUTS_PMUXCR_SSI2_SSI	0x00002000	/* Used for SSI2 */
-#define CCSR_GUTS_PMUXCR_LA_22_25_LA	0x00000000	/* Latched Address */
-#define CCSR_GUTS_PMUXCR_LA_22_25_HI	0x00000400	/* High impedance */
-#define CCSR_GUTS_PMUXCR_DBGDRV		0x00000200	/* Signals not driven */
-#define CCSR_GUTS_PMUXCR_DMA2_0		0x00000008
-#define CCSR_GUTS_PMUXCR_DMA2_3		0x00000004
-#define CCSR_GUTS_PMUXCR_DMA1_0		0x00000002
-#define CCSR_GUTS_PMUXCR_DMA1_3		0x00000001
-
-/*
- * Set the DMA external control bits in the GUTS
- *
- * The DMA external control bits in the PMUXCR are only meaningful for
- * channels 0 and 3.  Any other channels are ignored.
- *
- * guts: Pointer to GUTS structure
- * co: The DMA controller (0 or 1)
- * ch: The channel on the DMA controller (0, 1, 2, or 3)
- * value: the new value for the bit (0 or 1)
- */
-static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
-	unsigned int co, unsigned int ch, unsigned int value)
-{
-	if ((ch == 0) || (ch == 3)) {
-		unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
-
-		clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
-	}
-}
-
-#define CCSR_GUTS_CLKDVDR_PXCKEN	0x80000000
-#define CCSR_GUTS_CLKDVDR_SSICKEN	0x20000000
-#define CCSR_GUTS_CLKDVDR_PXCKINV	0x10000000
-#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
-#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK	0x06000000
-#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
-	(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
-#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT	16
-#define CCSR_GUTS_CLKDVDR_PXCLK_MASK	0x001F0000
-#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
-#define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
-#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
-
-#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h
deleted file mode 100644
index 4080bab0468c..000000000000
--- a/include/asm-powerpc/immap_cpm2.h
+++ /dev/null
@@ -1,650 +0,0 @@
-/*
- * CPM2 Internal Memory Map
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * The Internal Memory Map for devices with CPM2 on them.  This
- * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
- * 8560).
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_CPM2__
-#define __IMMAP_CPM2__
-
-#include <linux/types.h>
-
-/* System configuration registers.
-*/
-typedef	struct sys_82xx_conf {
-	u32	sc_siumcr;
-	u32	sc_sypcr;
-	u8	res1[6];
-	u16	sc_swsr;
-	u8	res2[20];
-	u32	sc_bcr;
-	u8	sc_ppc_acr;
-	u8	res3[3];
-	u32	sc_ppc_alrh;
-	u32	sc_ppc_alrl;
-	u8	sc_lcl_acr;
-	u8	res4[3];
-	u32	sc_lcl_alrh;
-	u32	sc_lcl_alrl;
-	u32	sc_tescr1;
-	u32	sc_tescr2;
-	u32	sc_ltescr1;
-	u32	sc_ltescr2;
-	u32	sc_pdtea;
-	u8	sc_pdtem;
-	u8	res5[3];
-	u32	sc_ldtea;
-	u8	sc_ldtem;
-	u8	res6[163];
-} sysconf_82xx_cpm2_t;
-
-typedef	struct sys_85xx_conf {
-	u32	sc_cear;
-	u16	sc_ceer;
-	u16	sc_cemr;
-	u8	res1[70];
-	u32	sc_smaer;
-	u8	res2[4];
-	u32	sc_smevr;
-	u32	sc_smctr;
-	u32	sc_lmaer;
-	u8	res3[4];
-	u32	sc_lmevr;
-	u32	sc_lmctr;
-	u8	res4[144];
-} sysconf_85xx_cpm2_t;
-
-typedef union sys_conf {
-	sysconf_82xx_cpm2_t	siu_82xx;
-	sysconf_85xx_cpm2_t	siu_85xx;
-} sysconf_cpm2_t;
-
-
-
-/* Memory controller registers.
-*/
-typedef struct	mem_ctlr {
-	u32	memc_br0;
-	u32	memc_or0;
-	u32	memc_br1;
-	u32	memc_or1;
-	u32	memc_br2;
-	u32	memc_or2;
-	u32	memc_br3;
-	u32	memc_or3;
-	u32	memc_br4;
-	u32	memc_or4;
-	u32	memc_br5;
-	u32	memc_or5;
-	u32	memc_br6;
-	u32	memc_or6;
-	u32	memc_br7;
-	u32	memc_or7;
-	u32	memc_br8;
-	u32	memc_or8;
-	u32	memc_br9;
-	u32	memc_or9;
-	u32	memc_br10;
-	u32	memc_or10;
-	u32	memc_br11;
-	u32	memc_or11;
-	u8	res1[8];
-	u32	memc_mar;
-	u8	res2[4];
-	u32	memc_mamr;
-	u32	memc_mbmr;
-	u32	memc_mcmr;
-	u8	res3[8];
-	u16	memc_mptpr;
-	u8	res4[2];
-	u32	memc_mdr;
-	u8	res5[4];
-	u32	memc_psdmr;
-	u32	memc_lsdmr;
-	u8	memc_purt;
-	u8	res6[3];
-	u8	memc_psrt;
-	u8	res7[3];
-	u8	memc_lurt;
-	u8	res8[3];
-	u8	memc_lsrt;
-	u8	res9[3];
-	u32	memc_immr;
-	u32	memc_pcibr0;
-	u32	memc_pcibr1;
-	u8	res10[16];
-	u32	memc_pcimsk0;
-	u32	memc_pcimsk1;
-	u8	res11[52];
-} memctl_cpm2_t;
-
-/* System Integration Timers.
-*/
-typedef struct	sys_int_timers {
-	u8	res1[32];
-	u16	sit_tmcntsc;
-	u8	res2[2];
-	u32	sit_tmcnt;
-	u8	res3[4];
-	u32	sit_tmcntal;
-	u8	res4[16];
-	u16	sit_piscr;
-	u8	res5[2];
-	u32	sit_pitc;
-	u32	sit_pitr;
-	u8      res6[94];
-	u8	res7[390];
-} sit_cpm2_t;
-
-#define PISCR_PIRQ_MASK		((u16)0xff00)
-#define PISCR_PS		((u16)0x0080)
-#define PISCR_PIE		((u16)0x0004)
-#define PISCR_PTF		((u16)0x0002)
-#define PISCR_PTE		((u16)0x0001)
-
-/* PCI Controller.
-*/
-typedef struct pci_ctlr {
-	u32	pci_omisr;
-	u32	pci_omimr;
-	u8	res1[8];
-	u32	pci_ifqpr;
-	u32	pci_ofqpr;
-	u8	res2[8];
-	u32	pci_imr0;
-	u32	pci_imr1;
-	u32	pci_omr0;
-	u32	pci_omr1;
-	u32	pci_odr;
-	u8	res3[4];
-	u32	pci_idr;
-	u8	res4[20];
-	u32	pci_imisr;
-	u32	pci_imimr;
-	u8	res5[24];
-	u32	pci_ifhpr;
-	u8	res6[4];
-	u32	pci_iftpr;
-	u8	res7[4];
-	u32	pci_iphpr;
-	u8	res8[4];
-	u32	pci_iptpr;
-	u8	res9[4];
-	u32	pci_ofhpr;
-	u8	res10[4];
-	u32	pci_oftpr;
-	u8	res11[4];
-	u32	pci_ophpr;
-	u8	res12[4];
-	u32	pci_optpr;
-	u8	res13[8];
-	u32	pci_mucr;
-	u8	res14[8];
-	u32	pci_qbar;
-	u8	res15[12];
-	u32	pci_dmamr0;
-	u32	pci_dmasr0;
-	u32	pci_dmacdar0;
-	u8	res16[4];
-	u32	pci_dmasar0;
-	u8	res17[4];
-	u32	pci_dmadar0;
-	u8	res18[4];
-	u32	pci_dmabcr0;
-	u32	pci_dmandar0;
-	u8	res19[86];
-	u32	pci_dmamr1;
-	u32	pci_dmasr1;
-	u32	pci_dmacdar1;
-	u8	res20[4];
-	u32	pci_dmasar1;
-	u8	res21[4];
-	u32	pci_dmadar1;
-	u8	res22[4];
-	u32	pci_dmabcr1;
-	u32	pci_dmandar1;
-	u8	res23[88];
-	u32	pci_dmamr2;
-	u32	pci_dmasr2;
-	u32	pci_dmacdar2;
-	u8	res24[4];
-	u32	pci_dmasar2;
-	u8	res25[4];
-	u32	pci_dmadar2;
-	u8	res26[4];
-	u32	pci_dmabcr2;
-	u32	pci_dmandar2;
-	u8	res27[88];
-	u32	pci_dmamr3;
-	u32	pci_dmasr3;
-	u32	pci_dmacdar3;
-	u8	res28[4];
-	u32	pci_dmasar3;
-	u8	res29[4];
-	u32	pci_dmadar3;
-	u8	res30[4];
-	u32	pci_dmabcr3;
-	u32	pci_dmandar3;
-	u8	res31[344];
-	u32	pci_potar0;
-	u8	res32[4];
-	u32	pci_pobar0;
-	u8	res33[4];
-	u32	pci_pocmr0;
-	u8	res34[4];
-	u32	pci_potar1;
-	u8	res35[4];
-	u32	pci_pobar1;
-	u8	res36[4];
-	u32	pci_pocmr1;
-	u8	res37[4];
-	u32	pci_potar2;
-	u8	res38[4];
-	u32	pci_pobar2;
-	u8	res39[4];
-	u32	pci_pocmr2;
-	u8	res40[50];
-	u32	pci_ptcr;
-	u32	pci_gpcr;
-	u32	pci_gcr;
-	u32	pci_esr;
-	u32	pci_emr;
-	u32	pci_ecr;
-	u32	pci_eacr;
-	u8	res41[4];
-	u32	pci_edcr;
-	u8	res42[4];
-	u32	pci_eccr;
-	u8	res43[44];
-	u32	pci_pitar1;
-	u8	res44[4];
-	u32	pci_pibar1;
-	u8	res45[4];
-	u32	pci_picmr1;
-	u8	res46[4];
-	u32	pci_pitar0;
-	u8	res47[4];
-	u32	pci_pibar0;
-	u8	res48[4];
-	u32	pci_picmr0;
-	u8	res49[4];
-	u32	pci_cfg_addr;
-	u32	pci_cfg_data;
-	u32	pci_int_ack;
-	u8	res50[756];
-} pci_cpm2_t;
-
-/* Interrupt Controller.
-*/
-typedef struct interrupt_controller {
-	u16	ic_sicr;
-	u8	res1[2];
-	u32	ic_sivec;
-	u32	ic_sipnrh;
-	u32	ic_sipnrl;
-	u32	ic_siprr;
-	u32	ic_scprrh;
-	u32	ic_scprrl;
-	u32	ic_simrh;
-	u32	ic_simrl;
-	u32	ic_siexr;
-	u8	res2[88];
-} intctl_cpm2_t;
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
-	u32	car_sccr;
-	u8	res1[4];
-	u32	car_scmr;
-	u8	res2[4];
-	u32	car_rsr;
-	u32	car_rmr;
-	u8	res[104];
-} car_cpm2_t;
-
-/* Input/Output Port control/status registers.
- * Names consistent with processor manual, although they are different
- * from the original 8xx names.......
- */
-typedef struct io_port {
-	u32	iop_pdira;
-	u32	iop_ppara;
-	u32	iop_psora;
-	u32	iop_podra;
-	u32	iop_pdata;
-	u8	res1[12];
-	u32	iop_pdirb;
-	u32	iop_pparb;
-	u32	iop_psorb;
-	u32	iop_podrb;
-	u32	iop_pdatb;
-	u8	res2[12];
-	u32	iop_pdirc;
-	u32	iop_pparc;
-	u32	iop_psorc;
-	u32	iop_podrc;
-	u32	iop_pdatc;
-	u8	res3[12];
-	u32	iop_pdird;
-	u32	iop_ppard;
-	u32	iop_psord;
-	u32	iop_podrd;
-	u32	iop_pdatd;
-	u8	res4[12];
-} iop_cpm2_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
-	u8	cpmt_tgcr1;
-	u8	res1[3];
-	u8	cpmt_tgcr2;
-	u8	res2[11];
-	u16	cpmt_tmr1;
-	u16	cpmt_tmr2;
-	u16	cpmt_trr1;
-	u16	cpmt_trr2;
-	u16	cpmt_tcr1;
-	u16	cpmt_tcr2;
-	u16	cpmt_tcn1;
-	u16	cpmt_tcn2;
-	u16	cpmt_tmr3;
-	u16	cpmt_tmr4;
-	u16	cpmt_trr3;
-	u16	cpmt_trr4;
-	u16	cpmt_tcr3;
-	u16	cpmt_tcr4;
-	u16	cpmt_tcn3;
-	u16	cpmt_tcn4;
-	u16	cpmt_ter1;
-	u16	cpmt_ter2;
-	u16	cpmt_ter3;
-	u16	cpmt_ter4;
-	u8	res3[584];
-} cpmtimer_cpm2_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
-	u8	res0[24];
-	u8	sdma_sdsr;
-	u8	res1[3];
-	u8	sdma_sdmr;
-	u8	res2[3];
-	u8	sdma_idsr1;
-	u8	res3[3];
-	u8	sdma_idmr1;
-	u8	res4[3];
-	u8	sdma_idsr2;
-	u8	res5[3];
-	u8	sdma_idmr2;
-	u8	res6[3];
-	u8	sdma_idsr3;
-	u8	res7[3];
-	u8	sdma_idmr3;
-	u8	res8[3];
-	u8	sdma_idsr4;
-	u8	res9[3];
-	u8	sdma_idmr4;
-	u8	res10[707];
-} sdma_cpm2_t;
-
-/* Fast controllers
-*/
-typedef struct fcc {
-	u32	fcc_gfmr;
-	u32	fcc_fpsmr;
-	u16	fcc_ftodr;
-	u8	res1[2];
-	u16	fcc_fdsr;
-	u8	res2[2];
-	u16	fcc_fcce;
-	u8	res3[2];
-	u16	fcc_fccm;
-	u8	res4[2];
-	u8	fcc_fccs;
-	u8	res5[3];
-	u8	fcc_ftirr_phy[4];
-} fcc_t;
-
-/* Fast controllers continued
- */
-typedef struct fcc_c {
-	u32	fcc_firper;
-	u32	fcc_firer;
-	u32	fcc_firsr_hi;
-	u32	fcc_firsr_lo;
-	u8	fcc_gfemr;
-	u8	res1[15];
-} fcc_c_t;
-
-/* TC Layer
- */
-typedef struct tclayer {
-	u16	tc_tcmode;
-	u16	tc_cdsmr;
-	u16	tc_tcer;
-	u16	tc_rcc;
-	u16	tc_tcmr;
-	u16	tc_fcc;
-	u16	tc_ccc;
-	u16	tc_icc;
-	u16	tc_tcc;
-	u16	tc_ecc;
-	u8	res1[12];
-} tclayer_t;
-
-
-/* I2C
-*/
-typedef struct i2c {
-	u8	i2c_i2mod;
-	u8	res1[3];
-	u8	i2c_i2add;
-	u8	res2[3];
-	u8	i2c_i2brg;
-	u8	res3[3];
-	u8	i2c_i2com;
-	u8	res4[3];
-	u8	i2c_i2cer;
-	u8	res5[3];
-	u8	i2c_i2cmr;
-	u8	res6[331];
-} i2c_cpm2_t;
-
-typedef struct scc {		/* Serial communication channels */
-	u32	scc_gsmrl;
-	u32	scc_gsmrh;
-	u16	scc_psmr;
-	u8	res1[2];
-	u16	scc_todr;
-	u16	scc_dsr;
-	u16	scc_scce;
-	u8	res2[2];
-	u16	scc_sccm;
-	u8	res3;
-	u8	scc_sccs;
-	u8	res4[8];
-} scc_t;
-
-typedef struct smc {		/* Serial management channels */
-	u8	res1[2];
-	u16	smc_smcmr;
-	u8	res2[2];
-	u8	smc_smce;
-	u8	res3[3];
-	u8	smc_smcm;
-	u8	res4[5];
-} smc_t;
-
-/* Serial Peripheral Interface.
-*/
-typedef struct spi_ctrl {
-	u16	spi_spmode;
-	u8	res1[4];
-	u8	spi_spie;
-	u8	res2[3];
-	u8	spi_spim;
-	u8	res3[2];
-	u8	spi_spcom;
-	u8	res4[82];
-} spictl_cpm2_t;
-
-/* CPM Mux.
-*/
-typedef struct cpmux {
-	u8	cmx_si1cr;
-	u8	res1;
-	u8	cmx_si2cr;
-	u8	res2;
-	u32	cmx_fcr;
-	u32	cmx_scr;
-	u8	cmx_smr;
-	u8	res3;
-	u16	cmx_uar;
-	u8	res4[16];
-} cpmux_t;
-
-/* SIRAM control
-*/
-typedef struct siram {
-	u16	si_amr;
-	u16	si_bmr;
-	u16	si_cmr;
-	u16	si_dmr;
-	u8	si_gmr;
-	u8	res1;
-	u8	si_cmdr;
-	u8	res2;
-	u8	si_str;
-	u8	res3;
-	u16	si_rsr;
-} siramctl_t;
-
-typedef struct mcc {
-	u16	mcc_mcce;
-	u8	res1[2];
-	u16	mcc_mccm;
-	u8	res2[2];
-	u8	mcc_mccf;
-	u8	res3[7];
-} mcc_t;
-
-typedef struct comm_proc {
-	u32	cp_cpcr;
-	u32	cp_rccr;
-	u8	res1[14];
-	u16	cp_rter;
-	u8	res2[2];
-	u16	cp_rtmr;
-	u16	cp_rtscr;
-	u8	res3[2];
-	u32	cp_rtsr;
-	u8	res4[12];
-} cpm_cpm2_t;
-
-/* USB Controller.
-*/
-typedef struct usb_ctlr {
-	u8	usb_usmod;
-	u8	usb_usadr;
-	u8	usb_uscom;
-	u8	res1[1];
-	u16	usb_usep1;
-	u16	usb_usep2;
-	u16	usb_usep3;
-	u16	usb_usep4;
-	u8	res2[4];
-	u16	usb_usber;
-	u8	res3[2];
-	u16	usb_usbmr;
-	u8	usb_usbs;
-	u8	res4[7];
-} usb_cpm2_t;
-
-/* ...and the whole thing wrapped up....
-*/
-
-typedef struct immap {
-	/* Some references are into the unique and known dpram spaces,
-	 * others are from the generic base.
-	 */
-#define im_dprambase	im_dpram1
-	u8		im_dpram1[16*1024];
-	u8		res1[16*1024];
-	u8		im_dpram2[4*1024];
-	u8		res2[8*1024];
-	u8		im_dpram3[4*1024];
-	u8		res3[16*1024];
-
-	sysconf_cpm2_t	im_siu_conf;	/* SIU Configuration */
-	memctl_cpm2_t	im_memctl;	/* Memory Controller */
-	sit_cpm2_t	im_sit;		/* System Integration Timers */
-	pci_cpm2_t	im_pci;		/* PCI Controller */
-	intctl_cpm2_t	im_intctl;	/* Interrupt Controller */
-	car_cpm2_t	im_clkrst;	/* Clocks and reset */
-	iop_cpm2_t	im_ioport;	/* IO Port control/status */
-	cpmtimer_cpm2_t	im_cpmtimer;	/* CPM timers */
-	sdma_cpm2_t	im_sdma;	/* SDMA control/status */
-
-	fcc_t		im_fcc[3];	/* Three FCCs */
-	u8		res4z[32];
-	fcc_c_t		im_fcc_c[3];	/* Continued FCCs */
-
-	u8		res4[32];
-
-	tclayer_t	im_tclayer[8];	/* Eight TCLayers */
-	u16		tc_tcgsr;
-	u16		tc_tcger;
-
-	/* First set of baud rate generators.
-	*/
-	u8		res[236];
-	u32		im_brgc5;
-	u32		im_brgc6;
-	u32		im_brgc7;
-	u32		im_brgc8;
-
-	u8		res5[608];
-
-	i2c_cpm2_t	im_i2c;		/* I2C control/status */
-	cpm_cpm2_t	im_cpm;		/* Communication processor */
-
-	/* Second set of baud rate generators.
-	*/
-	u32		im_brgc1;
-	u32		im_brgc2;
-	u32		im_brgc3;
-	u32		im_brgc4;
-
-	scc_t		im_scc[4];	/* Four SCCs */
-	smc_t		im_smc[2];	/* Couple of SMCs */
-	spictl_cpm2_t	im_spi;		/* A SPI */
-	cpmux_t		im_cpmux;	/* CPM clock route mux */
-	siramctl_t	im_siramctl1;	/* First SI RAM Control */
-	mcc_t		im_mcc1;	/* First MCC */
-	siramctl_t	im_siramctl2;	/* Second SI RAM Control */
-	mcc_t		im_mcc2;	/* Second MCC */
-	usb_cpm2_t	im_usb;		/* USB Controller */
-
-	u8		res6[1153];
-
-	u16		im_si1txram[256];
-	u8		res7[512];
-	u16		im_si1rxram[256];
-	u8		res8[512];
-	u16		im_si2txram[256];
-	u8		res9[512];
-	u16		im_si2rxram[256];
-	u8		res10[512];
-	u8		res11[4096];
-} cpm2_map_t;
-
-extern cpm2_map_t __iomem *cpm2_immr;
-
-#endif /* __IMMAP_CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
deleted file mode 100644
index 7b6f411db3e6..000000000000
--- a/include/asm-powerpc/immap_qe.h
+++ /dev/null
@@ -1,485 +0,0 @@
-/*
- * include/asm-powerpc/immap_qe.h
- *
- * QUICC Engine (QE) Internal Memory Map.
- * The Internal Memory Map for devices with QE on them. This
- * is the superset of all QE devices (8360, etc.).
-
- * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_IMMAP_QE_H
-#define _ASM_POWERPC_IMMAP_QE_H
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
-
-/* QE I-RAM */
-struct qe_iram {
-	__be32	iadd;		/* I-RAM Address Register */
-	__be32	idata;		/* I-RAM Data Register */
-	u8	res0[0x78];
-} __attribute__ ((packed));
-
-/* QE Interrupt Controller */
-struct qe_ic_regs {
-	__be32	qicr;
-	__be32	qivec;
-	__be32	qripnr;
-	__be32	qipnr;
-	__be32	qipxcc;
-	__be32	qipycc;
-	__be32	qipwcc;
-	__be32	qipzcc;
-	__be32	qimr;
-	__be32	qrimr;
-	__be32	qicnr;
-	u8	res0[0x4];
-	__be32	qiprta;
-	__be32	qiprtb;
-	u8	res1[0x4];
-	__be32	qricr;
-	u8	res2[0x20];
-	__be32	qhivec;
-	u8	res3[0x1C];
-} __attribute__ ((packed));
-
-/* Communications Processor */
-struct cp_qe {
-	__be32	cecr;		/* QE command register */
-	__be32	ceccr;		/* QE controller configuration register */
-	__be32	cecdr;		/* QE command data register */
-	u8	res0[0xA];
-	__be16	ceter;		/* QE timer event register */
-	u8	res1[0x2];
-	__be16	cetmr;		/* QE timers mask register */
-	__be32	cetscr;		/* QE time-stamp timer control register */
-	__be32	cetsr1;		/* QE time-stamp register 1 */
-	__be32	cetsr2;		/* QE time-stamp register 2 */
-	u8	res2[0x8];
-	__be32	cevter;		/* QE virtual tasks event register */
-	__be32	cevtmr;		/* QE virtual tasks mask register */
-	__be16	cercr;		/* QE RAM control register */
-	u8	res3[0x2];
-	u8	res4[0x24];
-	__be16	ceexe1;		/* QE external request 1 event register */
-	u8	res5[0x2];
-	__be16	ceexm1;		/* QE external request 1 mask register */
-	u8	res6[0x2];
-	__be16	ceexe2;		/* QE external request 2 event register */
-	u8	res7[0x2];
-	__be16	ceexm2;		/* QE external request 2 mask register */
-	u8	res8[0x2];
-	__be16	ceexe3;		/* QE external request 3 event register */
-	u8	res9[0x2];
-	__be16	ceexm3;		/* QE external request 3 mask register */
-	u8	res10[0x2];
-	__be16	ceexe4;		/* QE external request 4 event register */
-	u8	res11[0x2];
-	__be16	ceexm4;		/* QE external request 4 mask register */
-	u8	res12[0x3A];
-	__be32	ceurnr;		/* QE microcode revision number register */
-	u8	res13[0x244];
-} __attribute__ ((packed));
-
-/* QE Multiplexer */
-struct qe_mux {
-	__be32	cmxgcr;		/* CMX general clock route register */
-	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
-	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
-	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
-	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
-	__be32	cmxupcr;	/* CMX UPC clock route register */
-	u8	res0[0x1C];
-} __attribute__ ((packed));
-
-/* QE Timers */
-struct qe_timers {
-	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
-	u8	res0[0x3];
-	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
-	u8	res1[0xB];
-	__be16	gtmdr1;		/* Timer 1 mode register */
-	__be16	gtmdr2;		/* Timer 2 mode register */
-	__be16	gtrfr1;		/* Timer 1 reference register */
-	__be16	gtrfr2;		/* Timer 2 reference register */
-	__be16	gtcpr1;		/* Timer 1 capture register */
-	__be16	gtcpr2;		/* Timer 2 capture register */
-	__be16	gtcnr1;		/* Timer 1 counter */
-	__be16	gtcnr2;		/* Timer 2 counter */
-	__be16	gtmdr3;		/* Timer 3 mode register */
-	__be16	gtmdr4;		/* Timer 4 mode register */
-	__be16	gtrfr3;		/* Timer 3 reference register */
-	__be16	gtrfr4;		/* Timer 4 reference register */
-	__be16	gtcpr3;		/* Timer 3 capture register */
-	__be16	gtcpr4;		/* Timer 4 capture register */
-	__be16	gtcnr3;		/* Timer 3 counter */
-	__be16	gtcnr4;		/* Timer 4 counter */
-	__be16	gtevr1;		/* Timer 1 event register */
-	__be16	gtevr2;		/* Timer 2 event register */
-	__be16	gtevr3;		/* Timer 3 event register */
-	__be16	gtevr4;		/* Timer 4 event register */
-	__be16	gtps;		/* Timer 1 prescale register */
-	u8 res2[0x46];
-} __attribute__ ((packed));
-
-/* BRG */
-struct qe_brg {
-	__be32	brgc[16];	/* BRG configuration registers */
-	u8	res0[0x40];
-} __attribute__ ((packed));
-
-/* SPI */
-struct spi {
-	u8	res0[0x20];
-	__be32	spmode;		/* SPI mode register */
-	u8	res1[0x2];
-	u8	spie;		/* SPI event register */
-	u8	res2[0x1];
-	u8	res3[0x2];
-	u8	spim;		/* SPI mask register */
-	u8	res4[0x1];
-	u8	res5[0x1];
-	u8	spcom;		/* SPI command register */
-	u8	res6[0x2];
-	__be32	spitd;		/* SPI transmit data register (cpu mode) */
-	__be32	spird;		/* SPI receive data register (cpu mode) */
-	u8	res7[0x8];
-} __attribute__ ((packed));
-
-/* SI */
-struct si1 {
-	__be16	siamr1;		/* SI1 TDMA mode register */
-	__be16	sibmr1;		/* SI1 TDMB mode register */
-	__be16	sicmr1;		/* SI1 TDMC mode register */
-	__be16	sidmr1;		/* SI1 TDMD mode register */
-	u8	siglmr1_h;	/* SI1 global mode register high */
-	u8	res0[0x1];
-	u8	sicmdr1_h;	/* SI1 command register high */
-	u8	res2[0x1];
-	u8	sistr1_h;	/* SI1 status register high */
-	u8	res3[0x1];
-	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
-	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
-	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
-	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
-	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
-	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
-	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
-	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
-	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
-	u8	res4[0x8];
-	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
-	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
-	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
-	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
-	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
-	u8	res5[0x1];
-	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
-	u8	res6[0x1];
-	u8	sistr1_l;	/* SI1 status register low 8 bits */
-	u8	res7[0x1];
-	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
-	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
-	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
-	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
-	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
-	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
-	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
-	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
-	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
-	u8	res8[0x8];
-	__be32	siml1;		/* SI1 multiframe limit register */
-	u8	siedm1;		/* SI1 extended diagnostic mode register */
-	u8	res9[0xBB];
-} __attribute__ ((packed));
-
-/* SI Routing Tables */
-struct sir {
-	u8 	tx[0x400];
-	u8	rx[0x400];
-	u8	res0[0x800];
-} __attribute__ ((packed));
-
-/* USB Controller */
-struct usb_ctlr {
-	u8	usb_usmod;
-	u8	usb_usadr;
-	u8	usb_uscom;
-	u8	res1[1];
-	__be16	usb_usep1;
-	__be16	usb_usep2;
-	__be16	usb_usep3;
-	__be16	usb_usep4;
-	u8	res2[4];
-	__be16	usb_usber;
-	u8	res3[2];
-	__be16	usb_usbmr;
-	u8	res4[1];
-	u8	usb_usbs;
-	__be16	usb_ussft;
-	u8	res5[2];
-	__be16	usb_usfrn;
-	u8	res6[0x22];
-} __attribute__ ((packed));
-
-/* MCC */
-struct mcc {
-	__be32	mcce;		/* MCC event register */
-	__be32	mccm;		/* MCC mask register */
-	__be32	mccf;		/* MCC configuration register */
-	__be32	merl;		/* MCC emergency request level register */
-	u8	res0[0xF0];
-} __attribute__ ((packed));
-
-/* QE UCC Slow */
-struct ucc_slow {
-	__be32	gumr_l;		/* UCCx general mode register (low) */
-	__be32	gumr_h;		/* UCCx general mode register (high) */
-	__be16	upsmr;		/* UCCx protocol-specific mode register */
-	u8	res0[0x2];
-	__be16	utodr;		/* UCCx transmit on demand register */
-	__be16	udsr;		/* UCCx data synchronization register */
-	__be16	ucce;		/* UCCx event register */
-	u8	res1[0x2];
-	__be16	uccm;		/* UCCx mask register */
-	u8	res2[0x1];
-	u8	uccs;		/* UCCx status register */
-	u8	res3[0x24];
-	__be16	utpt;
-	u8	res4[0x52];
-	u8	guemr;		/* UCC general extended mode register */
-} __attribute__ ((packed));
-
-/* QE UCC Fast */
-struct ucc_fast {
-	__be32	gumr;		/* UCCx general mode register */
-	__be32	upsmr;		/* UCCx protocol-specific mode register */
-	__be16	utodr;		/* UCCx transmit on demand register */
-	u8	res0[0x2];
-	__be16	udsr;		/* UCCx data synchronization register */
-	u8	res1[0x2];
-	__be32	ucce;		/* UCCx event register */
-	__be32	uccm;		/* UCCx mask register */
-	u8	uccs;		/* UCCx status register */
-	u8	res2[0x7];
-	__be32	urfb;		/* UCC receive FIFO base */
-	__be16	urfs;		/* UCC receive FIFO size */
-	u8	res3[0x2];
-	__be16	urfet;		/* UCC receive FIFO emergency threshold */
-	__be16	urfset;		/* UCC receive FIFO special emergency
-				   threshold */
-	__be32	utfb;		/* UCC transmit FIFO base */
-	__be16	utfs;		/* UCC transmit FIFO size */
-	u8	res4[0x2];
-	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
-	u8	res5[0x2];
-	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
-	u8	res6[0x2];
-	__be16	utpt;		/* UCC transmit polling timer */
-	u8	res7[0x2];
-	__be32	urtry;		/* UCC retry counter register */
-	u8	res8[0x4C];
-	u8	guemr;		/* UCC general extended mode register */
-} __attribute__ ((packed));
-
-struct ucc {
-	union {
-		struct	ucc_slow slow;
-		struct	ucc_fast fast;
-		u8	res[0x200];	/* UCC blocks are 512 bytes each */
-	};
-} __attribute__ ((packed));
-
-/* MultiPHY UTOPIA POS Controllers (UPC) */
-struct upc {
-	__be32	upgcr;		/* UTOPIA/POS general configuration register */
-	__be32	uplpa;		/* UTOPIA/POS last PHY address */
-	__be32	uphec;		/* ATM HEC register */
-	__be32	upuc;		/* UTOPIA/POS UCC configuration */
-	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
-	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
-	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
-	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
-	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
-	u8	res0[0xC];
-	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
-	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
-	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
-	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
-	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
-	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
-	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
-	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
-	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
-	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
-	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
-	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
-	__be32	upde1;		/* UTOPIA/POS device 1 event */
-	__be32	upde2;		/* UTOPIA/POS device 2 event */
-	__be32	upde3;		/* UTOPIA/POS device 3 event */
-	__be32	upde4;		/* UTOPIA/POS device 4 event */
-	__be16	uprp1;
-	__be16	uprp2;
-	__be16	uprp3;
-	__be16	uprp4;
-	u8	res1[0x8];
-	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
-	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
-	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
-	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
-	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
-	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
-	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
-	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
-	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
-	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
-	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
-	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
-	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
-	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
-	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
-	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
-	__be32	uper1;		/* Device 1 port enable register */
-	__be32	uper2;		/* Device 2 port enable register */
-	__be32	uper3;		/* Device 3 port enable register */
-	__be32	uper4;		/* Device 4 port enable register */
-	u8	res2[0x150];
-} __attribute__ ((packed));
-
-/* SDMA */
-struct sdma {
-	__be32	sdsr;		/* Serial DMA status register */
-	__be32	sdmr;		/* Serial DMA mode register */
-	__be32	sdtr1;		/* SDMA system bus threshold register */
-	__be32	sdtr2;		/* SDMA secondary bus threshold register */
-	__be32	sdhy1;		/* SDMA system bus hysteresis register */
-	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
-	__be32	sdta1;		/* SDMA system bus address register */
-	__be32	sdta2;		/* SDMA secondary bus address register */
-	__be32	sdtm1;		/* SDMA system bus MSNUM register */
-	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
-	u8	res0[0x10];
-	__be32	sdaqr;		/* SDMA address bus qualify register */
-	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
-	u8	res1[0x4];
-	__be32	sdebcr;		/* SDMA CAM entries base register */
-	u8	res2[0x38];
-} __attribute__ ((packed));
-
-/* Debug Space */
-struct dbg {
-	__be32	bpdcr;		/* Breakpoint debug command register */
-	__be32	bpdsr;		/* Breakpoint debug status register */
-	__be32	bpdmr;		/* Breakpoint debug mask register */
-	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
-	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
-	u8	res0[0x8];
-	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
-	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
-	u8	res1[0x8];
-	__be32	bprmir;		/* Breakpoint request mode immediate register */
-	__be32	bprmsr;		/* Breakpoint request mode serial register */
-	__be32	bpemr;		/* Breakpoint exit mode register */
-	u8	res2[0x48];
-} __attribute__ ((packed));
-
-/*
- * RISC Special Registers (Trap and Breakpoint).  These are described in
- * the QE Developer's Handbook.
- */
-struct rsp {
-	__be32 tibcr[16];	/* Trap/instruction breakpoint control regs */
-	u8 res0[64];
-	__be32 ibcr0;
-	__be32 ibs0;
-	__be32 ibcnr0;
-	u8 res1[4];
-	__be32 ibcr1;
-	__be32 ibs1;
-	__be32 ibcnr1;
-	__be32 npcr;
-	__be32 dbcr;
-	__be32 dbar;
-	__be32 dbamr;
-	__be32 dbsr;
-	__be32 dbcnr;
-	u8 res2[12];
-	__be32 dbdr_h;
-	__be32 dbdr_l;
-	__be32 dbdmr_h;
-	__be32 dbdmr_l;
-	__be32 bsr;
-	__be32 bor;
-	__be32 bior;
-	u8 res3[4];
-	__be32 iatr[4];
-	__be32 eccr;		/* Exception control configuration register */
-	__be32 eicr;
-	u8 res4[0x100-0xf8];
-} __attribute__ ((packed));
-
-struct qe_immap {
-	struct qe_iram		iram;		/* I-RAM */
-	struct qe_ic_regs	ic;		/* Interrupt Controller */
-	struct cp_qe		cp;		/* Communications Processor */
-	struct qe_mux		qmx;		/* QE Multiplexer */
-	struct qe_timers	qet;		/* QE Timers */
-	struct spi		spi[0x2];	/* spi */
-	struct mcc		mcc;		/* mcc */
-	struct qe_brg		brg;		/* brg */
-	struct usb_ctlr		usb;		/* USB */
-	struct si1		si1;		/* SI */
-	u8			res11[0x800];
-	struct sir		sir;		/* SI Routing Tables */
-	struct ucc		ucc1;		/* ucc1 */
-	struct ucc		ucc3;		/* ucc3 */
-	struct ucc		ucc5;		/* ucc5 */
-	struct ucc		ucc7;		/* ucc7 */
-	u8			res12[0x600];
-	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
-	struct ucc		ucc2;		/* ucc2 */
-	struct ucc		ucc4;		/* ucc4 */
-	struct ucc		ucc6;		/* ucc6 */
-	struct ucc		ucc8;		/* ucc8 */
-	u8			res13[0x600];
-	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
-	struct sdma		sdma;		/* SDMA */
-	struct dbg		dbg;		/* 0x104080 - 0x1040FF
-						   Debug Space */
-	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
-						   RISC Special Registers
-						   (Trap and Breakpoint) */
-	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
-	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
-	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
-	u8			muram[0xC000];	/* 0x110000 - 0x11C000
-						   Multi-user RAM */
-	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
-	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
-} __attribute__ ((packed));
-
-extern struct qe_immap __iomem *qe_immr;
-extern phys_addr_t get_qe_base(void);
-
-static inline unsigned long immrbar_virt_to_phys(void *address)
-{
-	if ( ((u32)address >= (u32)qe_immr) &&
-			((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
-		return (unsigned long)(address - (u32)qe_immr +
-				(u32)get_qe_base());
-	return (unsigned long)virt_to_phys(address);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h
deleted file mode 100644
index 44d7927aec69..000000000000
--- a/include/asm-powerpc/io-defs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* This file is meant to be include multiple times by other headers */
-/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */
-
-DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-
-#ifdef __powerpc64__
-DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
-DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
-#endif /* __powerpc64__ */
-
-DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
-DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port)
-DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port)
-DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port)
-DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port)
-DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port)
-
-DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c),
-		 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c),
-		 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c),
-		 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c),
-		 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c),
-		 (a, b, c), mem, a)
-DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c),
-		 (a, b, c), mem, a)
-
-DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c),
-		 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c),
-		 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
-		 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
-		 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
-		 (p, b, c), pio, p)
-DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
-		 (p, b, c), pio, p)
-
-DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n),
-		 (a, c, n), mem, a)
-DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n),
-		 (d, s, n), mem, s)
-DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n),
-		 (d, s, n), mem, d)
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
deleted file mode 100644
index 8b627823f5f9..000000000000
--- a/include/asm-powerpc/io.h
+++ /dev/null
@@ -1,784 +0,0 @@
-#ifndef _ASM_POWERPC_IO_H
-#define _ASM_POWERPC_IO_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Check of existence of legacy devices */
-extern int check_legacy_ioport(unsigned long base_port);
-#define I8042_DATA_REG	0x60
-#define FDC_BASE	0x3f0
-/* only relevant for PReP */
-#define _PIDXR		0x279
-#define _PNPWRP		0xa79
-#define PNPBIOS_BASE	0xf000
-
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/byteorder.h>
-#include <asm/synch.h>
-#include <asm/delay.h>
-#include <asm/mmu.h>
-
-#include <asm-generic/iomap.h>
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#endif
-
-#define SIO_CONFIG_RA	0x398
-#define SIO_CONFIG_RD	0x399
-
-#define SLOW_DOWN_IO
-
-/* 32 bits uses slightly different variables for the various IO
- * bases. Most of this file only uses _IO_BASE though which we
- * define properly based on the platform
- */
-#ifndef CONFIG_PCI
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET 0
-#elif defined(CONFIG_PPC32)
-#define _IO_BASE	isa_io_base
-#define _ISA_MEM_BASE	isa_mem_base
-#define PCI_DRAM_OFFSET	pci_dram_offset
-#else
-#define _IO_BASE	pci_io_base
-#define _ISA_MEM_BASE	isa_mem_base
-#define PCI_DRAM_OFFSET	0
-#endif
-
-extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
-extern unsigned long pci_dram_offset;
-
-extern resource_size_t isa_mem_base;
-
-#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
-#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
-#endif
-
-/*
- *
- * Low level MMIO accessors
- *
- * This provides the non-bus specific accessors to MMIO. Those are PowerPC
- * specific and thus shouldn't be used in generic code. The accessors
- * provided here are:
- *
- *	in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
- *	out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
- *	_insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
- *
- * Those operate directly on a kernel virtual address. Note that the prototype
- * for the out_* accessors has the arguments in opposite order from the usual
- * linux PCI accessors. Unlike those, they take the address first and the value
- * next.
- *
- * Note: I might drop the _ns suffix on the stream operations soon as it is
- * simply normal for stream operations to not swap in the first place.
- *
- */
-
-#ifdef CONFIG_PPC64
-#define IO_SET_SYNC_FLAG()	do { local_paca->io_sync = 1; } while(0)
-#else
-#define IO_SET_SYNC_FLAG()
-#endif
-
-/* gcc 4.0 and older doesn't have 'Z' constraint */
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
-#define DEF_MMIO_IN_LE(name, size, insn)				\
-static inline u##size name(const volatile u##size __iomem *addr)	\
-{									\
-	u##size ret;							\
-	__asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync"	\
-		: "=r" (ret) : "r" (addr), "m" (*addr) : "memory");	\
-	return ret;							\
-}
-
-#define DEF_MMIO_OUT_LE(name, size, insn) 				\
-static inline void name(volatile u##size __iomem *addr, u##size val)	\
-{									\
-	__asm__ __volatile__("sync;"#insn" %1,0,%2"			\
-		: "=m" (*addr) : "r" (val), "r" (addr) : "memory");	\
-	IO_SET_SYNC_FLAG();						\
-}
-#else /* newer gcc */
-#define DEF_MMIO_IN_LE(name, size, insn)				\
-static inline u##size name(const volatile u##size __iomem *addr)	\
-{									\
-	u##size ret;							\
-	__asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync"	\
-		: "=r" (ret) : "Z" (*addr) : "memory");			\
-	return ret;							\
-}
-
-#define DEF_MMIO_OUT_LE(name, size, insn) 				\
-static inline void name(volatile u##size __iomem *addr, u##size val)	\
-{									\
-	__asm__ __volatile__("sync;"#insn" %1,%y0"			\
-		: "=Z" (*addr) : "r" (val) : "memory");			\
-	IO_SET_SYNC_FLAG();						\
-}
-#endif
-
-#define DEF_MMIO_IN_BE(name, size, insn)				\
-static inline u##size name(const volatile u##size __iomem *addr)	\
-{									\
-	u##size ret;							\
-	__asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
-		: "=r" (ret) : "m" (*addr) : "memory");			\
-	return ret;							\
-}
-
-#define DEF_MMIO_OUT_BE(name, size, insn)				\
-static inline void name(volatile u##size __iomem *addr, u##size val)	\
-{									\
-	__asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"			\
-		: "=m" (*addr) : "r" (val) : "memory");			\
-	IO_SET_SYNC_FLAG();						\
-}
-
-
-DEF_MMIO_IN_BE(in_8,     8, lbz);
-DEF_MMIO_IN_BE(in_be16, 16, lhz);
-DEF_MMIO_IN_BE(in_be32, 32, lwz);
-DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
-DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
-
-DEF_MMIO_OUT_BE(out_8,     8, stb);
-DEF_MMIO_OUT_BE(out_be16, 16, sth);
-DEF_MMIO_OUT_BE(out_be32, 32, stw);
-DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
-DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
-
-#ifdef __powerpc64__
-DEF_MMIO_OUT_BE(out_be64, 64, std);
-DEF_MMIO_IN_BE(in_be64, 64, ld);
-
-/* There is no asm instructions for 64 bits reverse loads and stores */
-static inline u64 in_le64(const volatile u64 __iomem *addr)
-{
-	return swab64(in_be64(addr));
-}
-
-static inline void out_le64(volatile u64 __iomem *addr, u64 val)
-{
-	out_be64(addr, swab64(val));
-}
-#endif /* __powerpc64__ */
-
-/*
- * Low level IO stream instructions are defined out of line for now
- */
-extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
-extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
-extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
-extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
-extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
-extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
-
-/* The _ns naming is historical and will be removed. For now, just #define
- * the non _ns equivalent names
- */
-#define _insw	_insw_ns
-#define _insl	_insl_ns
-#define _outsw	_outsw_ns
-#define _outsl	_outsl_ns
-
-
-/*
- * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
- */
-
-extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
-extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
-			   unsigned long n);
-extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
-			 unsigned long n);
-
-/*
- *
- * PCI and standard ISA accessors
- *
- * Those are globally defined linux accessors for devices on PCI or ISA
- * busses. They follow the Linux defined semantics. The current implementation
- * for PowerPC is as close as possible to the x86 version of these, and thus
- * provides fairly heavy weight barriers for the non-raw versions
- *
- * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
- * allowing the platform to provide its own implementation of some or all
- * of the accessors.
- */
-
-/*
- * Include the EEH definitions when EEH is enabled only so they don't get
- * in the way when building for 32 bits
- */
-#ifdef CONFIG_EEH
-#include <asm/eeh.h>
-#endif
-
-/* Shortcut to the MMIO argument pointer */
-#define PCI_IO_ADDR	volatile void __iomem *
-
-/* Indirect IO address tokens:
- *
- * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
- * on all IOs. (Note that this is all 64 bits only for now)
- *
- * To help platforms who may need to differenciate MMIO addresses in
- * their hooks, a bitfield is reserved for use by the platform near the
- * top of MMIO addresses (not PIO, those have to cope the hard way).
- *
- * This bit field is 12 bits and is at the top of the IO virtual
- * addresses PCI_IO_INDIRECT_TOKEN_MASK.
- *
- * The kernel virtual space is thus:
- *
- *  0xD000000000000000		: vmalloc
- *  0xD000080000000000		: PCI PHB IO space
- *  0xD000080080000000		: ioremap
- *  0xD0000fffffffffff		: end of ioremap region
- *
- * Since the top 4 bits are reserved as the region ID, we use thus
- * the next 12 bits and keep 4 bits available for the future if the
- * virtual address space is ever to be extended.
- *
- * The direct IO mapping operations will then mask off those bits
- * before doing the actual access, though that only happen when
- * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
- * mechanism
- */
-
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
-#define PCI_IO_IND_TOKEN_SHIFT	48
-#define PCI_FIX_ADDR(addr)						\
-	((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
-#define PCI_GET_ADDR_TOKEN(addr)					\
-	(((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> 		\
-		PCI_IO_IND_TOKEN_SHIFT)
-#define PCI_SET_ADDR_TOKEN(addr, token) 				\
-do {									\
-	unsigned long __a = (unsigned long)(addr);			\
-	__a &= ~PCI_IO_IND_TOKEN_MASK;					\
-	__a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT;	\
-	(addr) = (void __iomem *)__a;					\
-} while(0)
-#else
-#define PCI_FIX_ADDR(addr) (addr)
-#endif
-
-
-/*
- * Non ordered and non-swapping "raw" accessors
- */
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
-}
-
-#ifdef __powerpc64__
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
-	*(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
-}
-#endif /* __powerpc64__ */
-
-/*
- *
- * PCI PIO and MMIO accessors.
- *
- *
- * On 32 bits, PIO operations have a recovery mechanism in case they trigger
- * machine checks (which they occasionally do when probing non existing
- * IO ports on some platforms, like PowerMac and 8xx).
- * I always found it to be of dubious reliability and I am tempted to get
- * rid of it one of these days. So if you think it's important to keep it,
- * please voice up asap. We never had it for 64 bits and I do not intend
- * to port it over
- */
-
-#ifdef CONFIG_PPC32
-
-#define __do_in_asm(name, op)				\
-static inline unsigned int name(unsigned int port)	\
-{							\
-	unsigned int x;					\
-	__asm__ __volatile__(				\
-		"sync\n"				\
-		"0:"	op "	%0,0,%1\n"		\
-		"1:	twi	0,%0,0\n"		\
-		"2:	isync\n"			\
-		"3:	nop\n"				\
-		"4:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"5:	li	%0,-1\n"		\
-		"	b	4b\n"			\
-		".previous\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align	2\n"			\
-		"	.long	0b,5b\n"		\
-		"	.long	1b,5b\n"		\
-		"	.long	2b,5b\n"		\
-		"	.long	3b,5b\n"		\
-		".previous"				\
-		: "=&r" (x)				\
-		: "r" (port + _IO_BASE)			\
-		: "memory");  				\
-	return x;					\
-}
-
-#define __do_out_asm(name, op)				\
-static inline void name(unsigned int val, unsigned int port) \
-{							\
-	__asm__ __volatile__(				\
-		"sync\n"				\
-		"0:" op " %0,0,%1\n"			\
-		"1:	sync\n"				\
-		"2:\n"					\
-		".section __ex_table,\"a\"\n"		\
-		"	.align	2\n"			\
-		"	.long	0b,2b\n"		\
-		"	.long	1b,2b\n"		\
-		".previous"				\
-		: : "r" (val), "r" (port + _IO_BASE)	\
-		: "memory");   	   	   		\
-}
-
-__do_in_asm(_rec_inb, "lbzx")
-__do_in_asm(_rec_inw, "lhbrx")
-__do_in_asm(_rec_inl, "lwbrx")
-__do_out_asm(_rec_outb, "stbx")
-__do_out_asm(_rec_outw, "sthbrx")
-__do_out_asm(_rec_outl, "stwbrx")
-
-#endif /* CONFIG_PPC32 */
-
-/* The "__do_*" operations below provide the actual "base" implementation
- * for each of the defined acccessor. Some of them use the out_* functions
- * directly, some of them still use EEH, though we might change that in the
- * future. Those macros below provide the necessary argument swapping and
- * handling of the IO base for PIO.
- *
- * They are themselves used by the macros that define the actual accessors
- * and can be used by the hooks if any.
- *
- * Note that PIO operations are always defined in terms of their corresonding
- * MMIO operations. That allows platforms like iSeries who want to modify the
- * behaviour of both to only hook on the MMIO version and get both. It's also
- * possible to hook directly at the toplevel PIO operation if they have to
- * be handled differently
- */
-#define __do_writeb(val, addr)	out_8(PCI_FIX_ADDR(addr), val)
-#define __do_writew(val, addr)	out_le16(PCI_FIX_ADDR(addr), val)
-#define __do_writel(val, addr)	out_le32(PCI_FIX_ADDR(addr), val)
-#define __do_writeq(val, addr)	out_le64(PCI_FIX_ADDR(addr), val)
-#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
-#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
-#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
-
-#ifdef CONFIG_EEH
-#define __do_readb(addr)	eeh_readb(PCI_FIX_ADDR(addr))
-#define __do_readw(addr)	eeh_readw(PCI_FIX_ADDR(addr))
-#define __do_readl(addr)	eeh_readl(PCI_FIX_ADDR(addr))
-#define __do_readq(addr)	eeh_readq(PCI_FIX_ADDR(addr))
-#define __do_readw_be(addr)	eeh_readw_be(PCI_FIX_ADDR(addr))
-#define __do_readl_be(addr)	eeh_readl_be(PCI_FIX_ADDR(addr))
-#define __do_readq_be(addr)	eeh_readq_be(PCI_FIX_ADDR(addr))
-#else /* CONFIG_EEH */
-#define __do_readb(addr)	in_8(PCI_FIX_ADDR(addr))
-#define __do_readw(addr)	in_le16(PCI_FIX_ADDR(addr))
-#define __do_readl(addr)	in_le32(PCI_FIX_ADDR(addr))
-#define __do_readq(addr)	in_le64(PCI_FIX_ADDR(addr))
-#define __do_readw_be(addr)	in_be16(PCI_FIX_ADDR(addr))
-#define __do_readl_be(addr)	in_be32(PCI_FIX_ADDR(addr))
-#define __do_readq_be(addr)	in_be64(PCI_FIX_ADDR(addr))
-#endif /* !defined(CONFIG_EEH) */
-
-#ifdef CONFIG_PPC32
-#define __do_outb(val, port)	_rec_outb(val, port)
-#define __do_outw(val, port)	_rec_outw(val, port)
-#define __do_outl(val, port)	_rec_outl(val, port)
-#define __do_inb(port)		_rec_inb(port)
-#define __do_inw(port)		_rec_inw(port)
-#define __do_inl(port)		_rec_inl(port)
-#else /* CONFIG_PPC32 */
-#define __do_outb(val, port)	writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_outw(val, port)	writew(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_outl(val, port)	writel(val,(PCI_IO_ADDR)_IO_BASE+port);
-#define __do_inb(port)		readb((PCI_IO_ADDR)_IO_BASE + port);
-#define __do_inw(port)		readw((PCI_IO_ADDR)_IO_BASE + port);
-#define __do_inl(port)		readl((PCI_IO_ADDR)_IO_BASE + port);
-#endif /* !CONFIG_PPC32 */
-
-#ifdef CONFIG_EEH
-#define __do_readsb(a, b, n)	eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsw(a, b, n)	eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsl(a, b, n)	eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
-#else /* CONFIG_EEH */
-#define __do_readsb(a, b, n)	_insb(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsw(a, b, n)	_insw(PCI_FIX_ADDR(a), (b), (n))
-#define __do_readsl(a, b, n)	_insl(PCI_FIX_ADDR(a), (b), (n))
-#endif /* !CONFIG_EEH */
-#define __do_writesb(a, b, n)	_outsb(PCI_FIX_ADDR(a),(b),(n))
-#define __do_writesw(a, b, n)	_outsw(PCI_FIX_ADDR(a),(b),(n))
-#define __do_writesl(a, b, n)	_outsl(PCI_FIX_ADDR(a),(b),(n))
-
-#define __do_insb(p, b, n)	readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_insw(p, b, n)	readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_insl(p, b, n)	readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
-#define __do_outsb(p, b, n)	writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-#define __do_outsw(p, b, n)	writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-#define __do_outsl(p, b, n)	writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
-
-#define __do_memset_io(addr, c, n)	\
-				_memset_io(PCI_FIX_ADDR(addr), c, n)
-#define __do_memcpy_toio(dst, src, n)	\
-				_memcpy_toio(PCI_FIX_ADDR(dst), src, n)
-
-#ifdef CONFIG_EEH
-#define __do_memcpy_fromio(dst, src, n)	\
-				eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
-#else /* CONFIG_EEH */
-#define __do_memcpy_fromio(dst, src, n)	\
-				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
-#endif /* !CONFIG_EEH */
-
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define DEF_PCI_HOOK(x)		x
-#else
-#define DEF_PCI_HOOK(x)		NULL
-#endif
-
-/* Structure containing all the hooks */
-extern struct ppc_pci_io {
-
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)	ret (*name) at;
-#define DEF_PCI_AC_NORET(name, at, al, space, aa)	void (*name) at;
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-} ppc_pci_io;
-
-/* The inline wrappers */
-#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
-static inline ret name at					\
-{								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
-		return ppc_pci_io.name al;			\
-	return __do_##name al;					\
-}
-
-#define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
-static inline void name at					\
-{								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
-		ppc_pci_io.name al;				\
-	else							\
-		__do_##name al;					\
-}
-
-#include <asm/io-defs.h>
-
-#undef DEF_PCI_AC_RET
-#undef DEF_PCI_AC_NORET
-
-/* Some drivers check for the presence of readq & writeq with
- * a #ifdef, so we make them happy here.
- */
-#ifdef __powerpc64__
-#define readq	readq
-#define writeq	writeq
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
- * We don't do relaxed operations yet, at least not with this semantic
- */
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define readq_relaxed(addr) readq(addr)
-
-#ifdef CONFIG_PPC32
-#define mmiowb()
-#else
-/*
- * Enforce synchronisation of stores vs. spin_unlock
- * (this does it explicitly, though our implementation of spin_unlock
- * does it implicitely too)
- */
-static inline void mmiowb(void)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
-	: "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
-	: "memory");
-}
-#endif /* !CONFIG_PPC32 */
-
-static inline void iosync(void)
-{
-        __asm__ __volatile__ ("sync" : : : "memory");
-}
-
-/* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- * Those are fairly week though. They don't provide a barrier between
- * MMIO and cacheable storage nor do they provide a barrier vs. locks,
- * they only provide barriers between 2 __raw MMIO operations and
- * possibly break write combining.
- */
-#define iobarrier_rw() eieio()
-#define iobarrier_r()  eieio()
-#define iobarrier_w()  eieio()
-
-
-/*
- * output pause versions need a delay at least for the
- * w83c105 ide controller in a p610.
- */
-#define inb_p(port)             inb(port)
-#define outb_p(val, port)       (udelay(1), outb((val), (port)))
-#define inw_p(port)             inw(port)
-#define outw_p(val, port)       (udelay(1), outw((val), (port)))
-#define inl_p(port)             inl(port)
-#define outl_p(val, port)       (udelay(1), outl((val), (port)))
-
-
-#define IO_SPACE_LIMIT ~(0UL)
-
-
-/**
- * ioremap     -   map bus memory into CPU space
- * @address:   bus address of the memory
- * @size:      size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * We provide a few variations of it:
- *
- * * ioremap is the standard one and provides non-cacheable guarded mappings
- *   and can be hooked by the platform via ppc_md
- *
- * * ioremap_flags allows to specify the page flags as an argument and can
- *   also be hooked by the platform via ppc_md
- *
- * * ioremap_nocache is identical to ioremap
- *
- * * iounmap undoes such a mapping and can be hooked
- *
- * * __ioremap_at (and the pending __iounmap_at) are low level functions to
- *   create hand-made mappings for use only by the PCI code and cannot
- *   currently be hooked. Must be page aligned.
- *
- * * __ioremap is the low level implementation used by ioremap and
- *   ioremap_flags and cannot be hooked (but can be used by a hook on one
- *   of the previous ones)
- *
- * * __iounmap, is the low level implementation used by iounmap and cannot
- *   be hooked (but can be used by a hook on iounmap)
- *
- */
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
-				   unsigned long flags);
-#define ioremap_nocache(addr, size)	ioremap((addr), (size))
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
-			       unsigned long flags);
-extern void __iounmap(volatile void __iomem *addr);
-
-extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
-				   unsigned long size, unsigned long flags);
-extern void __iounmap_at(void *ea, unsigned long size);
-
-/*
- * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
- * which needs some additional definitions here. They basically allow PIO
- * space overall to be 1GB. This will work as long as we never try to use
- * iomap to map MMIO below 1GB which should be fine on ppc64
- */
-#define HAVE_ARCH_PIO_SIZE		1
-#define PIO_OFFSET			0x00000000UL
-#define PIO_MASK			(FULL_IO_SIZE - 1)
-#define PIO_RESERVED			(FULL_IO_SIZE)
-
-#define mmio_read16be(addr)		readw_be(addr)
-#define mmio_read32be(addr)		readl_be(addr)
-#define mmio_write16be(val, addr)	writew_be(val, addr)
-#define mmio_write32be(val, addr)	writel_be(val, addr)
-#define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
-#define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
-#define mmio_insl(addr, dst, count)	readsl(addr, dst, count)
-#define mmio_outsb(addr, src, count)	writesb(addr, src, count)
-#define mmio_outsw(addr, src, count)	writesw(addr, src, count)
-#define mmio_outsl(addr, src, count)	writesl(addr, src, count)
-
-/**
- *	virt_to_phys	-	map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline unsigned long virt_to_phys(volatile void * address)
-{
-	return __pa((unsigned long)address);
-}
-
-/**
- *	phys_to_virt	-	map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline void * phys_to_virt(unsigned long address)
-{
-	return (void *)__va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/* We do NOT want virtual merging, it would put too much pressure on
- * our iommu allocator. Instead, we want drivers to be smart enough
- * to coalesce sglists that happen to have been mapped in a contiguous
- * way by the iommu
- */
-#define BIO_VMERGE_BOUNDARY	0
-
-/*
- * 32 bits still uses virt_to_bus() for it's implementation of DMA
- * mappings se we have to keep it defined here. We also have some old
- * drivers (shame shame shame) that use bus_to_virt() and haven't been
- * fixed yet so I need to define it here.
- */
-#ifdef CONFIG_PPC32
-
-static inline unsigned long virt_to_bus(volatile void * address)
-{
-        if (address == NULL)
-		return 0;
-        return __pa(address) + PCI_DRAM_OFFSET;
-}
-
-static inline void * bus_to_virt(unsigned long address)
-{
-        if (address == 0)
-		return NULL;
-        return __va(address - PCI_DRAM_OFFSET);
-}
-
-#define page_to_bus(page)	(page_to_phys(page) + PCI_DRAM_OFFSET)
-
-#endif /* CONFIG_PPC32 */
-
-/* access ports */
-#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))
-#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
-
-#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
-#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
-
-#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
-#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
-
-/* Clear and set bits in one shot.  These macros can be used to clear and
- * set multiple bits in a register using a single read-modify-write.  These
- * macros can also be used to set a multiple-bit bit pattern using a mask,
- * by specifying the mask in the 'clear' parameter and the new bit pattern
- * in the 'set' parameter.
- */
-
-#define clrsetbits(type, addr, clear, set) \
-	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
-
-#ifdef __powerpc64__
-#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
-#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
-#endif
-
-#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
-#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
-
-#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
-#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
-
-#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
-
-void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
-				size_t size, unsigned long flags);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_IO_H */
diff --git a/include/asm-powerpc/ioctl.h b/include/asm-powerpc/ioctl.h
deleted file mode 100644
index 57d68304218b..000000000000
--- a/include/asm-powerpc/ioctl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASM_POWERPC_IOCTL_H
-#define _ASM_POWERPC_IOCTL_H
-
-#define _IOC_SIZEBITS	13
-#define _IOC_DIRBITS	3
-
-#define _IOC_NONE	1U
-#define _IOC_READ	2U
-#define _IOC_WRITE	4U
-
-#include <asm-generic/ioctl.h>
-
-#endif	/* _ASM_POWERPC_IOCTL_H */
diff --git a/include/asm-powerpc/ioctls.h b/include/asm-powerpc/ioctls.h
deleted file mode 100644
index 279a6229584b..000000000000
--- a/include/asm-powerpc/ioctls.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef _ASM_POWERPC_IOCTLS_H
-#define _ASM_POWERPC_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX		_IO('f', 1)
-#define FIONCLEX	_IO('f', 2)
-#define FIOASYNC	_IOW('f', 125, int)
-#define FIONBIO		_IOW('f', 126, int)
-#define FIONREAD	_IOR('f', 127, int)
-#define TIOCINQ		FIONREAD
-#define FIOQSIZE	_IOR('f', 128, loff_t)
-
-#define TIOCGETP	_IOR('t', 8, struct sgttyb)
-#define TIOCSETP	_IOW('t', 9, struct sgttyb)
-#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
-
-#define TIOCSETC	_IOW('t', 17, struct tchars)
-#define TIOCGETC	_IOR('t', 18, struct tchars)
-#define TCGETS		_IOR('t', 19, struct termios)
-#define TCSETS		_IOW('t', 20, struct termios)
-#define TCSETSW		_IOW('t', 21, struct termios)
-#define TCSETSF		_IOW('t', 22, struct termios)
-
-#define TCGETA		_IOR('t', 23, struct termio)
-#define TCSETA		_IOW('t', 24, struct termio)
-#define TCSETAW		_IOW('t', 25, struct termio)
-#define TCSETAF		_IOW('t', 28, struct termio)
-
-#define TCSBRK		_IO('t', 29)
-#define TCXONC		_IO('t', 30)
-#define TCFLSH		_IO('t', 31)
-
-#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
-#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
-#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
-#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
-#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
-
-#define TIOCGLTC	_IOR('t', 116, struct ltchars)
-#define TIOCSLTC	_IOW('t', 117, struct ltchars)
-#define TIOCSPGRP	_IOW('t', 118, int)
-#define TIOCGPGRP	_IOR('t', 119, int)
-
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-
-#define TIOCSTI		0x5412
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-# define TIOCM_LE	0x001
-# define TIOCM_DTR	0x002
-# define TIOCM_RTS	0x004
-# define TIOCM_ST	0x008
-# define TIOCM_SR	0x010
-# define TIOCM_CTS	0x020
-# define TIOCM_CAR	0x040
-# define TIOCM_RNG	0x080
-# define TIOCM_DSR	0x100
-# define TIOCM_CD	TIOCM_CAR
-# define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-# define TIOCPKT_DATA		 0
-# define TIOCPKT_FLUSHREAD	 1
-# define TIOCPKT_FLUSHWRITE	 2
-# define TIOCPKT_STOP		 4
-# define TIOCPKT_START		 8
-# define TIOCPKT_NOSTOP		16
-# define TIOCPKT_DOSTOP		32
-
-
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-
-#endif	/* _ASM_POWERPC_IOCTLS_H */
diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h
deleted file mode 100644
index 51ecfef8d843..000000000000
--- a/include/asm-powerpc/iommu.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * Rewrite, cleanup:
- * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _ASM_IOMMU_H
-#define _ASM_IOMMU_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-#include <asm/machdep.h>
-#include <asm/types.h>
-
-#define IOMMU_PAGE_SHIFT      12
-#define IOMMU_PAGE_SIZE       (ASM_CONST(1) << IOMMU_PAGE_SHIFT)
-#define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
-#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
-
-/* Boot time flags */
-extern int iommu_is_off;
-extern int iommu_force_on;
-
-/* Pure 2^n version of get_order */
-static __inline__ __attribute_const__ int get_iommu_order(unsigned long size)
-{
-	return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1;
-}
-
-
-/*
- * IOMAP_MAX_ORDER defines the largest contiguous block
- * of dma space we can get.  IOMAP_MAX_ORDER = 13
- * allows up to 2**12 pages (4096 * 4096) = 16 MB
- */
-#define IOMAP_MAX_ORDER		13
-
-struct iommu_table {
-	unsigned long  it_busno;     /* Bus number this table belongs to */
-	unsigned long  it_size;      /* Size of iommu table in entries */
-	unsigned long  it_offset;    /* Offset into global table */
-	unsigned long  it_base;      /* mapped address of tce table */
-	unsigned long  it_index;     /* which iommu table this is */
-	unsigned long  it_type;      /* type: PCI or Virtual Bus */
-	unsigned long  it_blocksize; /* Entries in each block (cacheline) */
-	unsigned long  it_hint;      /* Hint for next alloc */
-	unsigned long  it_largehint; /* Hint for large allocs */
-	unsigned long  it_halfpoint; /* Breaking point for small/large allocs */
-	spinlock_t     it_lock;      /* Protects it_map */
-	unsigned long *it_map;       /* A simple allocation bitmap for now */
-};
-
-struct scatterlist;
-
-/* Frees table for an individual device node */
-extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
-
-/* Initializes an iommu_table based in values set in the passed-in
- * structure
- */
-extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
-					    int nid);
-
-extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
-			struct scatterlist *sglist, int nelems,
-			unsigned long mask, enum dma_data_direction direction,
-			struct dma_attrs *attrs);
-extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
-			   int nelems, enum dma_data_direction direction,
-			   struct dma_attrs *attrs);
-
-extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
-				  size_t size, dma_addr_t *dma_handle,
-				  unsigned long mask, gfp_t flag, int node);
-extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
-				void *vaddr, dma_addr_t dma_handle);
-extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
-				   void *vaddr, size_t size, unsigned long mask,
-				   enum dma_data_direction direction,
-				   struct dma_attrs *attrs);
-extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
-			       size_t size, enum dma_data_direction direction,
-			       struct dma_attrs *attrs);
-
-extern void iommu_init_early_pSeries(void);
-extern void iommu_init_early_iSeries(void);
-extern void iommu_init_early_dart(void);
-extern void iommu_init_early_pasemi(void);
-
-#ifdef CONFIG_PCI
-extern void pci_iommu_init(void);
-extern void pci_direct_iommu_init(void);
-#else
-static inline void pci_iommu_init(void) { }
-#endif
-
-extern void alloc_dart_table(void);
-#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
-static inline void iommu_save(void)
-{
-	if (ppc_md.iommu_save)
-		ppc_md.iommu_save();
-}
-
-static inline void iommu_restore(void)
-{
-	if (ppc_md.iommu_restore)
-		ppc_md.iommu_restore();
-}
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_IOMMU_H */
diff --git a/include/asm-powerpc/ipcbuf.h b/include/asm-powerpc/ipcbuf.h
deleted file mode 100644
index 2c3e1d94db1d..000000000000
--- a/include/asm-powerpc/ipcbuf.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _ASM_POWERPC_IPCBUF_H
-#define _ASM_POWERPC_IPCBUF_H
-
-/*
- * The ipc64_perm structure for the powerpc is identical to
- * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the
- * kernel.  Note extra padding because this structure is passed back
- * and forth between kernel and user space.  Pad space is left for:
- *	- 1 32-bit value to fill up for 8-byte alignment
- *	- 2 miscellaneous 64-bit values
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-
-struct ipc64_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode;
-	unsigned int	seq;
-	unsigned int	__pad1;
-	unsigned long long __unused1;
-	unsigned long long __unused2;
-};
-
-#endif /* _ASM_POWERPC_IPCBUF_H */
diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h
deleted file mode 100644
index 8ff08be00146..000000000000
--- a/include/asm-powerpc/ipic.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * include/asm-powerpc/ipic.h
- *
- * IPIC external definitions and structure.
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_IPIC_H__
-#define __ASM_IPIC_H__
-
-#include <linux/irq.h>
-
-/* Flags when we init the IPIC */
-#define IPIC_SPREADMODE_GRP_A	0x00000001
-#define IPIC_SPREADMODE_GRP_B	0x00000002
-#define IPIC_SPREADMODE_GRP_C	0x00000004
-#define IPIC_SPREADMODE_GRP_D	0x00000008
-#define IPIC_SPREADMODE_MIX_A	0x00000010
-#define IPIC_SPREADMODE_MIX_B	0x00000020
-#define IPIC_DISABLE_MCP_OUT	0x00000040
-#define IPIC_IRQ0_MCP		0x00000080
-
-/* IPIC registers offsets */
-#define IPIC_SICFR	0x00	/* System Global Interrupt Configuration Register */
-#define IPIC_SIVCR	0x04	/* System Global Interrupt Vector Register */
-#define IPIC_SIPNR_H	0x08	/* System Internal Interrupt Pending Register (HIGH) */
-#define IPIC_SIPNR_L	0x0C	/* System Internal Interrupt Pending Register (LOW) */
-#define IPIC_SIPRR_A	0x10	/* System Internal Interrupt group A Priority Register */
-#define IPIC_SIPRR_B	0x14	/* System Internal Interrupt group B Priority Register */
-#define IPIC_SIPRR_C	0x18	/* System Internal Interrupt group C Priority Register */
-#define IPIC_SIPRR_D	0x1C	/* System Internal Interrupt group D Priority Register */
-#define IPIC_SIMSR_H	0x20	/* System Internal Interrupt Mask Register (HIGH) */
-#define IPIC_SIMSR_L	0x24	/* System Internal Interrupt Mask Register (LOW) */
-#define IPIC_SICNR	0x28	/* System Internal Interrupt Control Register */
-#define IPIC_SEPNR	0x2C	/* System External Interrupt Pending Register */
-#define IPIC_SMPRR_A	0x30	/* System Mixed Interrupt group A Priority Register */
-#define IPIC_SMPRR_B	0x34	/* System Mixed Interrupt group B Priority Register */
-#define IPIC_SEMSR	0x38	/* System External Interrupt Mask Register */
-#define IPIC_SECNR	0x3C	/* System External Interrupt Control Register */
-#define IPIC_SERSR	0x40	/* System Error Status Register */
-#define IPIC_SERMR	0x44	/* System Error Mask Register */
-#define IPIC_SERCR	0x48	/* System Error Control Register */
-#define IPIC_SIFCR_H	0x50	/* System Internal Interrupt Force Register (HIGH) */
-#define IPIC_SIFCR_L	0x54	/* System Internal Interrupt Force Register (LOW) */
-#define IPIC_SEFCR	0x58	/* System External Interrupt Force Register */
-#define IPIC_SERFR	0x5C	/* System Error Force Register */
-#define IPIC_SCVCR	0x60	/* System Critical Interrupt Vector Register */
-#define IPIC_SMVCR	0x64	/* System Management Interrupt Vector Register */
-
-enum ipic_prio_grp {
-	IPIC_INT_GRP_A = IPIC_SIPRR_A,
-	IPIC_INT_GRP_D = IPIC_SIPRR_D,
-	IPIC_MIX_GRP_A = IPIC_SMPRR_A,
-	IPIC_MIX_GRP_B = IPIC_SMPRR_B,
-};
-
-enum ipic_mcp_irq {
-	IPIC_MCP_IRQ0 = 0,
-	IPIC_MCP_WDT  = 1,
-	IPIC_MCP_SBA  = 2,
-	IPIC_MCP_PCI1 = 5,
-	IPIC_MCP_PCI2 = 6,
-	IPIC_MCP_MU   = 7,
-};
-
-extern int ipic_set_priority(unsigned int irq, unsigned int priority);
-extern void ipic_set_highest_priority(unsigned int irq);
-extern void ipic_set_default_priority(void);
-extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq);
-extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
-extern u32 ipic_get_mcp_status(void);
-extern void ipic_clear_mcp_status(u32 mask);
-
-#ifdef CONFIG_PPC_MERGE
-extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
-extern unsigned int ipic_get_irq(void);
-#else
-extern void ipic_init(phys_addr_t phys_addr, unsigned int flags,
-		unsigned int irq_offset,
-		unsigned char *senses, unsigned int senses_count);
-extern int ipic_get_irq(void);
-#endif
-
-#endif /* __ASM_IPIC_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
deleted file mode 100644
index 1ef8e304e0ea..000000000000
--- a/include/asm-powerpc/irq.h
+++ /dev/null
@@ -1,654 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _ASM_POWERPC_IRQ_H
-#define _ASM_POWERPC_IRQ_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/threads.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-
-#include <asm/types.h>
-#include <asm/atomic.h>
-
-
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-	for ((i) = 0; (i) < NR_IRQS; ++(i))
-
-extern atomic_t ppc_n_lost_interrupts;
-
-#ifdef CONFIG_PPC_MERGE
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ			(0)
-
-/* This is a special irq number to return from get_irq() to tell that
- * no interrupt happened _and_ ignore it (don't count it as bad). Some
- * platforms like iSeries rely on that.
- */
-#define NO_IRQ_IGNORE		((unsigned int)-1)
-
-/* Total number of virq in the platform (make it a CONFIG_* option ? */
-#define NR_IRQS		512
-
-/* Number of irqs reserved for the legacy controller */
-#define NUM_ISA_INTERRUPTS	16
-
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-/* Interrupt controller "host" data structure. This could be defined as a
- * irq domain controller. That is, it handles the mapping between hardware
- * and virtual interrupt numbers for a given interrupt domain. The host
- * structure is generally created by the PIC code for a given PIC instance
- * (though a host can cover more than one PIC if they have a flat number
- * model). It's the host callbacks that are responsible for setting the
- * irq_chip on a given irq_desc after it's been mapped.
- *
- * The host code and data structures are fairly agnostic to the fact that
- * we use an open firmware device-tree. We do have references to struct
- * device_node in two places: in irq_find_host() to find the host matching
- * a given interrupt controller node, and of course as an argument to its
- * counterpart host->ops->match() callback. However, those are treated as
- * generic pointers by the core and the fact that it's actually a device-node
- * pointer is purely a convention between callers and implementation. This
- * code could thus be used on other architectures by replacing those two
- * by some sort of arch-specific void * "token" used to identify interrupt
- * controllers.
- */
-struct irq_host;
-struct radix_tree_root;
-
-/* Functions below are provided by the host and called whenever a new mapping
- * is created or an old mapping is disposed. The host can then proceed to
- * whatever internal data structures management is required. It also needs
- * to setup the irq_desc when returning from map().
- */
-struct irq_host_ops {
-	/* Match an interrupt controller device node to a host, returns
-	 * 1 on a match
-	 */
-	int (*match)(struct irq_host *h, struct device_node *node);
-
-	/* Create or update a mapping between a virtual irq number and a hw
-	 * irq number. This is called only once for a given mapping.
-	 */
-	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
-	/* Dispose of such a mapping */
-	void (*unmap)(struct irq_host *h, unsigned int virq);
-
-	/* Update of such a mapping  */
-	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
-	/* Translate device-tree interrupt specifier from raw format coming
-	 * from the firmware to a irq_hw_number_t (interrupt line number) and
-	 * type (sense) that can be passed to set_irq_type(). In the absence
-	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
-	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
-	 * the type (which amount to keeping whatever default value the
-	 * interrupt controller has for that line)
-	 */
-	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
-		     u32 *intspec, unsigned int intsize,
-		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
-};
-
-struct irq_host {
-	struct list_head	link;
-
-	/* type of reverse mapping technique */
-	unsigned int		revmap_type;
-#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
-#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
-#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
-#define IRQ_HOST_MAP_TREE	3 /* radix tree */
-	union {
-		struct {
-			unsigned int size;
-			unsigned int *revmap;
-		} linear;
-		struct radix_tree_root tree;
-	} revmap_data;
-	struct irq_host_ops	*ops;
-	void			*host_data;
-	irq_hw_number_t		inval_irq;
-
-	/* Optional device node pointer */
-	struct device_node	*of_node;
-};
-
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
-	irq_hw_number_t	hwirq;
-	struct irq_host	*host;
-};
-
-extern struct irq_map_entry irq_map[NR_IRQS];
-
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
-/**
- * irq_alloc_host - Allocate a new irq_host data structure
- * @of_node: optional device-tree node of the interrupt controller
- * @revmap_type: type of reverse mapping to use
- * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
- * @ops: map/unmap host callbacks
- * @inval_irq: provide a hw number in that host space that is always invalid
- *
- * Allocates and initialize and irq_host structure. Note that in the case of
- * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
- * for all legacy interrupts except 0 (which is always the invalid irq for
- * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
- * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
- * later during boot automatically (the reverse mapping will use the slow path
- * until that happens).
- */
-extern struct irq_host *irq_alloc_host(struct device_node *of_node,
-				       unsigned int revmap_type,
-				       unsigned int revmap_arg,
-				       struct irq_host_ops *ops,
-				       irq_hw_number_t inval_irq);
-
-
-/**
- * irq_find_host - Locates a host for a given device node
- * @node: device-tree node of the interrupt controller
- */
-extern struct irq_host *irq_find_host(struct device_node *node);
-
-
-/**
- * irq_set_default_host - Set a "default" host
- * @host: default host pointer
- *
- * For convenience, it's possible to set a "default" host that will be used
- * whenever NULL is passed to irq_create_mapping(). It makes life easier for
- * platforms that want to manipulate a few hard coded interrupt numbers that
- * aren't properly represented in the device-tree.
- */
-extern void irq_set_default_host(struct irq_host *host);
-
-
-/**
- * irq_set_virq_count - Set the maximum number of virt irqs
- * @count: number of linux virtual irqs, capped with NR_IRQS
- *
- * This is mainly for use by platforms like iSeries who want to program
- * the virtual irq number in the controller to avoid the reverse mapping
- */
-extern void irq_set_virq_count(unsigned int count);
-
-
-/**
- * irq_create_mapping - Map a hardware interrupt into linux virq space
- * @host: host owning this hardware interrupt or NULL for default host
- * @hwirq: hardware irq number in that host space
- *
- * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number.
- * If the sense/trigger is to be specified, set_irq_type() should be called
- * on the number returned from that call.
- */
-extern unsigned int irq_create_mapping(struct irq_host *host,
-				       irq_hw_number_t hwirq);
-
-
-/**
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- */
-extern void irq_dispose_mapping(unsigned int virq);
-
-/**
- * irq_find_mapping - Find a linux virq from an hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a slow path, for use by generic code. It's expected that an
- * irq controller implementation directly calls the appropriate low level
- * mapping function.
- */
-extern unsigned int irq_find_mapping(struct irq_host *host,
-				     irq_hw_number_t hwirq);
-
-/**
- * irq_create_direct_mapping - Allocate a virq for direct mapping
- * @host: host to allocate the virq for or NULL for default host
- *
- * This routine is used for irq controllers which can choose the hardware
- * interrupt numbers they generate. In such a case it's simplest to use
- * the linux virq as the hardware interrupt number.
- */
-extern unsigned int irq_create_direct_mapping(struct irq_host *host);
-
-/**
- * irq_radix_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses radix tree
- * revmaps
- */
-extern unsigned int irq_radix_revmap(struct irq_host *host,
-				     irq_hw_number_t hwirq);
-
-/**
- * irq_linear_revmap - Find a linux virq from a hw irq number.
- * @host: host owning this hardware interrupt
- * @hwirq: hardware irq number in that host space
- *
- * This is a fast path, for use by irq controller code that uses linear
- * revmaps. It does fallback to the slow path if the revmap doesn't exist
- * yet and will create the revmap entry with appropriate locking
- */
-
-extern unsigned int irq_linear_revmap(struct irq_host *host,
-				      irq_hw_number_t hwirq);
-
-
-
-/**
- * irq_alloc_virt - Allocate virtual irq numbers
- * @host: host owning these new virtual irqs
- * @count: number of consecutive numbers to allocate
- * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
- *
- * This is a low level function that is used internally by irq_create_mapping()
- * and that can be used by some irq controllers implementations for things
- * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
- */
-extern unsigned int irq_alloc_virt(struct irq_host *host,
-				   unsigned int count,
-				   unsigned int hint);
-
-/**
- * irq_free_virt - Free virtual irq numbers
- * @virq: virtual irq number of the first interrupt to free
- * @count: number of interrupts to free
- *
- * This function is the opposite of irq_alloc_virt. It will not clear reverse
- * maps, this should be done previously by unmap'ing the interrupt. In fact,
- * all interrupts covered by the range being freed should have been unmapped
- * prior to calling this.
- */
-extern void irq_free_virt(unsigned int virq, unsigned int count);
-
-
-/* -- OF helpers -- */
-
-/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
- * @controller: Device node of the interrupt controller
- * @inspec: Interrupt specifier from the device-tree
- * @intsize: Size of the interrupt specifier from the device-tree
- *
- * This function is identical to irq_create_mapping except that it takes
- * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions.
- */
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
-					  u32 *intspec, unsigned int intsize);
-
-
-/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
- * @device: Device node of the device whose interrupt is to be mapped
- * @index: Index of the interrupt to map
- *
- * This function is a wrapper that chains of_irq_map_one() and
- * irq_create_of_mapping() to make things easier to callers
- */
-extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
-
-/* -- End OF helpers -- */
-
-/**
- * irq_early_init - Init irq remapping subsystem
- */
-extern void irq_early_init(void);
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
-
-#else /* CONFIG_PPC_MERGE */
-
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ			(-1)
-#define NO_IRQ_IGNORE		(-2)
-
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK		0x1
-#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
-#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK	0x2
-#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
-
-
-#if defined(CONFIG_40x)
-#include <asm/ibm4xx.h>
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#ifndef UIC_WIDTH /* Number of interrupts per device */
-#define UIC_WIDTH 32
-#endif
-
-#ifndef NR_UICS /* number  of UIC devices */
-#define NR_UICS 1
-#endif
-
-#if defined (CONFIG_403)
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#define	NR_AIC_IRQS 32
-#define	NR_IRQS	 (NR_AIC_IRQS + NR_BOARD_IRQS)
-
-#elif !defined (CONFIG_403)
-
-/*
- *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
- * possible interrupts as well. There are seven, configurable external
- * interrupt pins and there are 17 internal interrupts for the on-chip
- * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
- *
- */
-
-
-#define NR_UIC_IRQS UIC_WIDTH
-#define NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-#endif
-
-#elif defined(CONFIG_44x)
-#include <asm/ibm44x.h>
-
-#define	NR_UIC_IRQS	32
-#define	NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
-
-#elif defined(CONFIG_8xx)
-
-/* Now include the board configuration specific associations.
-*/
-#include <asm/mpc8xx.h>
-
-/* The MPC8xx cores have 16 possible interrupts.  There are eight
- * possible level sensitive interrupts assigned and generated internally
- * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
- * There are eight external interrupts (IRQs) that can be configured
- * as either level or edge sensitive.
- *
- * On some implementations, there is also the possibility of an 8259
- * through the PCI and PCI-ISA bridges.
- *
- * We are "flattening" the interrupt vectors of the cascaded CPM
- * and 8259 interrupt controllers so that we can uniquely identify
- * any interrupt source with a single integer.
- */
-#define NR_SIU_INTS	16
-#define NR_CPM_INTS	32
-#ifndef NR_8259_INTS
-#define NR_8259_INTS 0
-#endif
-
-#define SIU_IRQ_OFFSET		0
-#define CPM_IRQ_OFFSET		(SIU_IRQ_OFFSET + NR_SIU_INTS)
-#define I8259_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
-
-#define NR_IRQS	(NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
-
-/* These values must be zero-based and map 1:1 with the SIU configuration.
- * They are used throughout the 8xx I/O subsystem to generate
- * interrupt masks, flags, and other control patterns.  This is why the
- * current kernel assumption of the 8259 as the base controller is such
- * a pain in the butt.
- */
-#define	SIU_IRQ0	(0)	/* Highest priority */
-#define	SIU_LEVEL0	(1)
-#define	SIU_IRQ1	(2)
-#define	SIU_LEVEL1	(3)
-#define	SIU_IRQ2	(4)
-#define	SIU_LEVEL2	(5)
-#define	SIU_IRQ3	(6)
-#define	SIU_LEVEL3	(7)
-#define	SIU_IRQ4	(8)
-#define	SIU_LEVEL4	(9)
-#define	SIU_IRQ5	(10)
-#define	SIU_LEVEL5	(11)
-#define	SIU_IRQ6	(12)
-#define	SIU_LEVEL6	(13)
-#define	SIU_IRQ7	(14)
-#define	SIU_LEVEL7	(15)
-
-#define MPC8xx_INT_FEC1		SIU_LEVEL1
-#define MPC8xx_INT_FEC2		SIU_LEVEL3
-
-#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
-#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
-#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
-#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
-#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
-#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
-
-/* The internal interrupts we can configure as we see fit.
- * My personal preference is CPM at level 2, which puts it above the
- * MBX PCI/ISA/IDE interrupts.
- */
-#ifndef PIT_INTERRUPT
-#define PIT_INTERRUPT		SIU_LEVEL0
-#endif
-#ifndef	CPM_INTERRUPT
-#define CPM_INTERRUPT		SIU_LEVEL2
-#endif
-#ifndef	PCMCIA_INTERRUPT
-#define PCMCIA_INTERRUPT	SIU_LEVEL6
-#endif
-#ifndef	DEC_INTERRUPT
-#define DEC_INTERRUPT		SIU_LEVEL7
-#endif
-
-/* Some internal interrupt registers use an 8-bit mask for the interrupt
- * level instead of a number.
- */
-#define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
-
-#else /* CONFIG_40x + CONFIG_8xx */
-/*
- * this is the # irq's for all ppc arch's (pmac/chrp/prep)
- * so it is the max of them all
- */
-#define NR_IRQS			256
-#define __DO_IRQ_CANON	1
-
-#ifndef CONFIG_8260
-
-#define NUM_8259_INTERRUPTS	16
-
-#else /* CONFIG_8260 */
-
-/* The 8260 has an internal interrupt controller with a maximum of
- * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
- * Don't be confused by the 8260 documentation where they list an
- * "interrupt number" and "interrupt vector".  We are only interested
- * in the interrupt vector.  There are "reserved" holes where the
- * vector number increases, but the interrupt number in the table does not.
- * (Document errata updates have fixed this...make sure you have up to
- * date processor documentation -- Dan).
- */
-
-#ifndef CPM_IRQ_OFFSET
-#define CPM_IRQ_OFFSET	0
-#endif
-
-#define NR_CPM_INTS	64
-
-#define	SIU_INT_ERROR		((uint)0x00 + CPM_IRQ_OFFSET)
-#define	SIU_INT_I2C		((uint)0x01 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SPI		((uint)0x02 + CPM_IRQ_OFFSET)
-#define	SIU_INT_RISC		((uint)0x03 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC1		((uint)0x04 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SMC2		((uint)0x05 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA1		((uint)0x06 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA2		((uint)0x07 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA3		((uint)0x08 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IDMA4		((uint)0x09 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SDMA		((uint)0x0a + CPM_IRQ_OFFSET)
-#define	SIU_INT_USB		((uint)0x0b + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER1		((uint)0x0c + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER2		((uint)0x0d + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER3		((uint)0x0e + CPM_IRQ_OFFSET)
-#define	SIU_INT_TIMER4		((uint)0x0f + CPM_IRQ_OFFSET)
-#define	SIU_INT_TMCNT		((uint)0x10 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PIT		((uint)0x11 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PCI		((uint)0x12 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ1		((uint)0x13 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ2		((uint)0x14 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ3		((uint)0x15 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ4		((uint)0x16 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ5		((uint)0x17 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ6		((uint)0x18 + CPM_IRQ_OFFSET)
-#define	SIU_INT_IRQ7		((uint)0x19 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC1		((uint)0x20 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC2		((uint)0x21 + CPM_IRQ_OFFSET)
-#define	SIU_INT_FCC3		((uint)0x22 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC1		((uint)0x24 + CPM_IRQ_OFFSET)
-#define	SIU_INT_MCC2		((uint)0x25 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC1		((uint)0x28 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC2		((uint)0x29 + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC3		((uint)0x2a + CPM_IRQ_OFFSET)
-#define	SIU_INT_SCC4		((uint)0x2b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC15		((uint)0x30 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC14		((uint)0x31 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC13		((uint)0x32 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC12		((uint)0x33 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC11		((uint)0x34 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC10		((uint)0x35 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC9		((uint)0x36 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC8		((uint)0x37 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC7		((uint)0x38 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC6		((uint)0x39 + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC5		((uint)0x3a + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC4		((uint)0x3b + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC3		((uint)0x3c + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC2		((uint)0x3d + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC1		((uint)0x3e + CPM_IRQ_OFFSET)
-#define	SIU_INT_PC0		((uint)0x3f + CPM_IRQ_OFFSET)
-
-#endif /* CONFIG_8260 */
-
-#endif /* Whatever way too big #ifdef */
-
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-/* pedantic: these are long because they are used with set_bit --RR */
-extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/*
- * Because many systems have two overlapping names spaces for
- * interrupts (ISA and XICS for example), and the ISA interrupts
- * have historically not been easy to renumber, we allow ISA
- * interrupts to take values 0 - 15, and shift up the remaining
- * interrupts by 0x10.
- */
-#define NUM_ISA_INTERRUPTS	0x10
-extern int __irq_offset_value;
-
-static inline int irq_offset_up(int irq)
-{
-	return(irq + __irq_offset_value);
-}
-
-static inline int irq_offset_down(int irq)
-{
-	return(irq - __irq_offset_value);
-}
-
-static inline int irq_offset_value(void)
-{
-	return __irq_offset_value;
-}
-
-#ifdef __DO_IRQ_CANON
-extern int ppc_do_canonicalize_irqs;
-#else
-#define ppc_do_canonicalize_irqs	0
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
-	if (ppc_do_canonicalize_irqs && irq == 2)
-		irq = 9;
-	return irq;
-}
-#endif /* CONFIG_PPC_MERGE */
-
-extern int distribute_irqs;
-
-struct irqaction;
-struct pt_regs;
-
-#define __ARCH_HAS_DO_SOFTIRQ
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-/*
- * Per-cpu stacks for handling critical, debug and machine check
- * level interrupts.
- */
-extern struct thread_info *critirq_ctx[NR_CPUS];
-extern struct thread_info *dbgirq_ctx[NR_CPUS];
-extern struct thread_info *mcheckirq_ctx[NR_CPUS];
-extern void exc_lvl_ctx_init(void);
-#else
-#define exc_lvl_ctx_init()
-#endif
-
-#ifdef CONFIG_IRQSTACKS
-/*
- * Per-cpu stacks for handling hard and soft interrupts.
- */
-extern struct thread_info *hardirq_ctx[NR_CPUS];
-extern struct thread_info *softirq_ctx[NR_CPUS];
-
-extern void irq_ctx_init(void);
-extern void call_do_softirq(struct thread_info *tp);
-extern int call_handle_irq(int irq, void *p1,
-			   struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
-extern void do_IRQ(struct pt_regs *regs);
-
-#endif /* _ASM_IRQ_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/irq_regs.h b/include/asm-powerpc/irq_regs.h
deleted file mode 100644
index ba94b51a0a70..000000000000
--- a/include/asm-powerpc/irq_regs.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#include <asm-generic/irq_regs.h>
-
diff --git a/include/asm-powerpc/irqflags.h b/include/asm-powerpc/irqflags.h
deleted file mode 100644
index cc6fdba33660..000000000000
--- a/include/asm-powerpc/irqflags.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-powerpc/irqflags.h
- *
- * IRQ flags handling
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-/*
- * Get definitions for raw_local_save_flags(x), etc.
- */
-#include <asm-powerpc/hw_irq.h>
-
-#else
-#ifdef CONFIG_TRACE_IRQFLAGS
-/*
- * Most of the CPU's IRQ-state tracing is done from assembly code; we
- * have to call a C function so call a wrapper that saves all the
- * C-clobbered registers.
- */
-#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
-#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
-#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
-	cmpdi	en, 0;				\
-	bne	95f;				\
-	stb	en,PACASOFTIRQEN(r13);		\
-	bl	.trace_hardirqs_off;		\
-	b	skip;				\
-95:	bl	.trace_hardirqs_on;		\
-	li	en,1;
-#define TRACE_AND_RESTORE_IRQ(en)		\
-	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
-96:	stb	en,PACASOFTIRQEN(r13)
-#else
-#define TRACE_ENABLE_INTS
-#define TRACE_DISABLE_INTS
-#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
-#define TRACE_AND_RESTORE_IRQ(en)		\
-	stb	en,PACASOFTIRQEN(r13)
-#endif
-#endif
-
-#endif
diff --git a/include/asm-powerpc/iseries/alpaca.h b/include/asm-powerpc/iseries/alpaca.h
deleted file mode 100644
index c0cce6727a69..000000000000
--- a/include/asm-powerpc/iseries/alpaca.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright © 2008  Stephen Rothwell IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
-#define _ASM_POWERPC_ISERIES_ALPACA_H
-
-/*
- * This is the part of the paca that the iSeries hypervisor
- * needs to be statically initialised. Immediately after boot
- * we switch to the normal Linux paca.
- */
-struct alpaca {
-	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
-	const void *reg_save_ptr;	/* Pointer to LpRegSave for PLIC */
-};
-
-#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
diff --git a/include/asm-powerpc/iseries/hv_call.h b/include/asm-powerpc/iseries/hv_call.h
deleted file mode 100644
index 162d653ad51f..000000000000
--- a/include/asm-powerpc/iseries/hv_call.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file contains the "hypervisor call" interface which is used to
- * drive the hypervisor from the OS.
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_H
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/paca.h>
-
-/* Type of yield for HvCallBaseYieldProcessor */
-#define HvCall_YieldTimed	0	/* Yield until specified time (tb) */
-#define HvCall_YieldToActive	1	/* Yield until all active procs have run */
-#define HvCall_YieldToProc	2	/* Yield until the specified processor has run */
-
-/* interrupt masks for setEnabledInterrupts */
-#define HvCall_MaskIPI		0x00000001
-#define HvCall_MaskLpEvent	0x00000002
-#define HvCall_MaskLpProd	0x00000004
-#define HvCall_MaskTimeout	0x00000008
-
-/* Log buffer formats */
-#define HvCall_LogBuffer_ASCII          0
-#define HvCall_LogBuffer_EBCDIC         1
-
-#define HvCallBaseAckDeferredInts			HvCallBase +  0
-#define HvCallBaseCpmPowerOff				HvCallBase +  1
-#define HvCallBaseGetHwPatch				HvCallBase +  2
-#define HvCallBaseReIplSpAttn				HvCallBase +  3
-#define HvCallBaseSetASR				HvCallBase +  4
-#define HvCallBaseSetASRAndRfi				HvCallBase +  5
-#define HvCallBaseSetIMR				HvCallBase +  6
-#define HvCallBaseSendIPI				HvCallBase +  7
-#define HvCallBaseTerminateMachine			HvCallBase +  8
-#define HvCallBaseTerminateMachineSrc			HvCallBase +  9
-#define HvCallBaseProcessPlicInterrupts			HvCallBase + 10
-#define HvCallBaseIsPrimaryCpmOrMsdIpl			HvCallBase + 11
-#define HvCallBaseSetVirtualSIT				HvCallBase + 12
-#define HvCallBaseVaryOffThisProcessor			HvCallBase + 13
-#define HvCallBaseVaryOffMemoryChunk			HvCallBase + 14
-#define HvCallBaseVaryOffInteractivePercentage		HvCallBase + 15
-#define HvCallBaseSendLpProd				HvCallBase + 16
-#define HvCallBaseSetEnabledInterrupts			HvCallBase + 17
-#define HvCallBaseYieldProcessor			HvCallBase + 18
-#define HvCallBaseVaryOffSharedProcUnits		HvCallBase + 19
-#define HvCallBaseSetVirtualDecr			HvCallBase + 20
-#define HvCallBaseClearLogBuffer			HvCallBase + 21
-#define HvCallBaseGetLogBufferCodePage			HvCallBase + 22
-#define HvCallBaseGetLogBufferFormat			HvCallBase + 23
-#define HvCallBaseGetLogBufferLength			HvCallBase + 24
-#define HvCallBaseReadLogBuffer				HvCallBase + 25
-#define HvCallBaseSetLogBufferFormatAndCodePage		HvCallBase + 26
-#define HvCallBaseWriteLogBuffer			HvCallBase + 27
-#define HvCallBaseRouter28				HvCallBase + 28
-#define HvCallBaseRouter29				HvCallBase + 29
-#define HvCallBaseRouter30				HvCallBase + 30
-#define HvCallBaseSetDebugBus				HvCallBase + 31
-
-#define HvCallCcSetDABR					HvCallCc + 7
-
-static inline void HvCall_setVirtualDecr(void)
-{
-	/*
-	 * Ignore any error return codes - most likely means that the
-	 * target value for the LP has been increased and this vary off
-	 * would bring us below the new target.
-	 */
-	HvCall0(HvCallBaseSetVirtualDecr);
-}
-
-static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm)
-{
-	HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm);
-}
-
-static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts)
-{
-	HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts);
-}
-
-static inline void HvCall_setLogBufferFormatAndCodepage(int format,
-		u32 codePage)
-{
-	HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage);
-}
-
-extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen);
-
-static inline void HvCall_sendIPI(struct paca_struct *targetPaca)
-{
-	HvCall1(HvCallBaseSendIPI, targetPaca->paca_index);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */
diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/include/asm-powerpc/iseries/hv_call_event.h
deleted file mode 100644
index cc029d388e11..000000000000
--- a/include/asm-powerpc/iseries/hv_call_event.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file contains the "hypervisor call" interface which is used to
- * drive the hypervisor from the OS.
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
-
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/abs_addr.h>
-
-struct HvLpEvent;
-
-typedef u8 HvLpEvent_Type;
-typedef u8 HvLpEvent_AckInd;
-typedef u8 HvLpEvent_AckType;
-
-typedef u8 HvLpDma_Direction;
-typedef u8 HvLpDma_AddressType;
-
-typedef u64 HvLpEvent_Rc;
-typedef u64 HvLpDma_Rc;
-
-#define HvCallEventAckLpEvent				HvCallEvent +  0
-#define HvCallEventCancelLpEvent			HvCallEvent +  1
-#define HvCallEventCloseLpEventPath			HvCallEvent +  2
-#define HvCallEventDmaBufList				HvCallEvent +  3
-#define HvCallEventDmaSingle				HvCallEvent +  4
-#define HvCallEventDmaToSp				HvCallEvent +  5
-#define HvCallEventGetOverflowLpEvents			HvCallEvent +  6
-#define HvCallEventGetSourceLpInstanceId		HvCallEvent +  7
-#define HvCallEventGetTargetLpInstanceId		HvCallEvent +  8
-#define HvCallEventOpenLpEventPath			HvCallEvent +  9
-#define HvCallEventSetLpEventStack			HvCallEvent + 10
-#define HvCallEventSignalLpEvent			HvCallEvent + 11
-#define HvCallEventSignalLpEventParms			HvCallEvent + 12
-#define HvCallEventSetInterLpQueueIndex			HvCallEvent + 13
-#define HvCallEventSetLpEventQueueInterruptProc		HvCallEvent + 14
-#define HvCallEventRouter15				HvCallEvent + 15
-
-static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex)
-{
-	HvCall1(HvCallEventGetOverflowLpEvents, queueIndex);
-}
-
-static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex)
-{
-	HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex);
-}
-
-static inline void HvCallEvent_setLpEventStack(u8 queueIndex,
-		char *eventStackAddr, u32 eventStackSize)
-{
-	HvCall3(HvCallEventSetLpEventStack, queueIndex,
-			virt_to_abs(eventStackAddr), eventStackSize);
-}
-
-static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex,
-		u16 lpLogicalProcIndex)
-{
-	HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex,
-			lpLogicalProcIndex);
-}
-
-static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event)
-{
-	return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event));
-}
-
-static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
-		HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd,
-		HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId,
-		HvLpInstanceId targetInstanceId, u64 correlationToken,
-		u64 eventData1, u64 eventData2, u64 eventData3,
-		u64 eventData4, u64 eventData5)
-{
-	/* Pack the misc bits into a single Dword to pass to PLIC */
-	union {
-		struct {
-			u8		ack_and_target;
-			u8		type;
-			u16		subtype;
-			HvLpInstanceId	src_inst;
-			HvLpInstanceId	target_inst;
-		} parms;
-		u64		dword;
-	} packed;
-
-	packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp;
-	packed.parms.type = type;
-	packed.parms.subtype = subtype;
-	packed.parms.src_inst = sourceInstanceId;
-	packed.parms.target_inst = targetInstanceId;
-
-	return HvCall7(HvCallEventSignalLpEventParms, packed.dword,
-			correlationToken, eventData1, eventData2,
-			eventData3, eventData4, eventData5);
-}
-
-extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag);
-extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle);
-extern dma_addr_t iseries_hv_map(void *vaddr, size_t size,
-			enum dma_data_direction direction);
-extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
-			enum dma_data_direction direction);
-
-static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
-{
-	return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event));
-}
-
-static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event)
-{
-	return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event));
-}
-
-static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId(
-		HvLpIndex targetLp, HvLpEvent_Type type)
-{
-	return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type);
-}
-
-static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId(
-		HvLpIndex targetLp, HvLpEvent_Type type)
-{
-	return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type);
-}
-
-static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp,
-		HvLpEvent_Type type)
-{
-	HvCall2(HvCallEventOpenLpEventPath, targetLp, type);
-}
-
-static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp,
-		HvLpEvent_Type type)
-{
-	HvCall2(HvCallEventCloseLpEventPath, targetLp, type);
-}
-
-static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type,
-		HvLpIndex remoteLp, HvLpDma_Direction direction,
-		HvLpInstanceId localInstanceId,
-		HvLpInstanceId remoteInstanceId,
-		HvLpDma_AddressType localAddressType,
-		HvLpDma_AddressType remoteAddressType,
-		/* Do these need to be converted to absolute addresses? */
-		u64 localBufList, u64 remoteBufList, u32 transferLength)
-{
-	/* Pack the misc bits into a single Dword to pass to PLIC */
-	union {
-		struct {
-			u8		flags;
-			HvLpIndex	remote;
-			u8		type;
-			u8		reserved;
-			HvLpInstanceId	local_inst;
-			HvLpInstanceId	remote_inst;
-		} parms;
-		u64		dword;
-	} packed;
-
-	packed.parms.flags = (direction << 7) |
-		(localAddressType << 6) | (remoteAddressType << 5);
-	packed.parms.remote = remoteLp;
-	packed.parms.type = type;
-	packed.parms.reserved = 0;
-	packed.parms.local_inst = localInstanceId;
-	packed.parms.remote_inst = remoteInstanceId;
-
-	return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList,
-			remoteBufList, transferLength);
-}
-
-static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote,
-		u32 length, HvLpDma_Direction dir)
-{
-	return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote,
-			length, dir);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */
diff --git a/include/asm-powerpc/iseries/hv_call_sc.h b/include/asm-powerpc/iseries/hv_call_sc.h
deleted file mode 100644
index f5d210959250..000000000000
--- a/include/asm-powerpc/iseries/hv_call_sc.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H
-
-#include <linux/types.h>
-
-#define HvCallBase		0x8000000000000000ul
-#define HvCallCc		0x8001000000000000ul
-#define HvCallCfg		0x8002000000000000ul
-#define HvCallEvent		0x8003000000000000ul
-#define HvCallHpt		0x8004000000000000ul
-#define HvCallPci		0x8005000000000000ul
-#define HvCallSm		0x8007000000000000ul
-#define HvCallXm		0x8009000000000000ul
-
-extern u64 HvCall0(u64);
-extern u64 HvCall1(u64, u64);
-extern u64 HvCall2(u64, u64, u64);
-extern u64 HvCall3(u64, u64, u64, u64);
-extern u64 HvCall4(u64, u64, u64, u64, u64);
-extern u64 HvCall5(u64, u64, u64, u64, u64, u64);
-extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64);
-extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64);
-
-extern u64 HvCall0Ret16(u64, void *);
-extern u64 HvCall1Ret16(u64, void *, u64);
-extern u64 HvCall2Ret16(u64, void *, u64, u64);
-extern u64 HvCall3Ret16(u64, void *, u64, u64, u64);
-extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64);
-extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64);
-extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64);
-extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64);
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */
diff --git a/include/asm-powerpc/iseries/hv_call_xm.h b/include/asm-powerpc/iseries/hv_call_xm.h
deleted file mode 100644
index 392ac3f54df0..000000000000
--- a/include/asm-powerpc/iseries/hv_call_xm.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * This file contains the "hypervisor call" interface which is used to
- * drive the hypervisor from SLIC.
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H
-#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-
-#define HvCallXmGetTceTableParms	HvCallXm +  0
-#define HvCallXmTestBus			HvCallXm +  1
-#define HvCallXmConnectBusUnit		HvCallXm +  2
-#define HvCallXmLoadTod			HvCallXm +  8
-#define HvCallXmTestBusUnit		HvCallXm +  9
-#define HvCallXmSetTce			HvCallXm + 11
-#define HvCallXmSetTces			HvCallXm + 13
-
-static inline void HvCallXm_getTceTableParms(u64 cb)
-{
-	HvCall1(HvCallXmGetTceTableParms, cb);
-}
-
-static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce)
-{
-	return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce);
-}
-
-static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset,
-		u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4)
-{
-	return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces,
-			     tce1, tce2, tce3, tce4);
-}
-
-static inline u64 HvCallXm_testBus(u16 busNumber)
-{
-	return HvCall1(HvCallXmTestBus, busNumber);
-}
-
-static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber,
-		u8 deviceId)
-{
-	return HvCall2(HvCallXmTestBusUnit, busNumber,
-			(subBusNumber << 8) | deviceId);
-}
-
-static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber,
-		u8 deviceId, u64 interruptToken)
-{
-	return HvCall5(HvCallXmConnectBusUnit, busNumber,
-			(subBusNumber << 8) | deviceId, interruptToken, 0,
-			0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */);
-}
-
-static inline u64 HvCallXm_loadTod(void)
-{
-	return HvCall0(HvCallXmLoadTod);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */
diff --git a/include/asm-powerpc/iseries/hv_lp_config.h b/include/asm-powerpc/iseries/hv_lp_config.h
deleted file mode 100644
index a006fd1e4a2c..000000000000
--- a/include/asm-powerpc/iseries/hv_lp_config.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
-#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
-
-/*
- * This file contains the interface to the LPAR configuration data
- * to determine which resources should be allocated to each partition.
- */
-
-#include <asm/iseries/hv_call_sc.h>
-#include <asm/iseries/hv_types.h>
-
-enum {
-	HvCallCfg_Cur	= 0,
-	HvCallCfg_Init	= 1,
-	HvCallCfg_Max	= 2,
-	HvCallCfg_Min	= 3
-};
-
-#define HvCallCfgGetSystemPhysicalProcessors		HvCallCfg +  6
-#define HvCallCfgGetPhysicalProcessors			HvCallCfg +  7
-#define HvCallCfgGetMsChunks				HvCallCfg +  9
-#define HvCallCfgGetSharedPoolIndex			HvCallCfg + 20
-#define HvCallCfgGetSharedProcUnits			HvCallCfg + 21
-#define HvCallCfgGetNumProcsInSharedPool		HvCallCfg + 22
-#define HvCallCfgGetVirtualLanIndexMap			HvCallCfg + 30
-#define HvCallCfgGetHostingLpIndex			HvCallCfg + 32
-
-extern HvLpIndex HvLpConfig_getLpIndex_outline(void);
-extern HvLpIndex HvLpConfig_getLpIndex(void);
-extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void);
-
-static inline u64 HvLpConfig_getMsChunks(void)
-{
-	return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(),
-			HvCallCfg_Cur);
-}
-
-static inline u64 HvLpConfig_getSystemPhysicalProcessors(void)
-{
-	return HvCall0(HvCallCfgGetSystemPhysicalProcessors);
-}
-
-static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
-{
-	return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI);
-}
-
-static inline u64 HvLpConfig_getPhysicalProcessors(void)
-{
-	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
-			HvCallCfg_Cur);
-}
-
-static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void)
-{
-	return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex());
-}
-
-static inline u64 HvLpConfig_getSharedProcUnits(void)
-{
-	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
-			HvCallCfg_Cur);
-}
-
-static inline u64 HvLpConfig_getMaxSharedProcUnits(void)
-{
-	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
-			HvCallCfg_Max);
-}
-
-static inline u64 HvLpConfig_getMaxPhysicalProcessors(void)
-{
-	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
-			HvCallCfg_Max);
-}
-
-static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp(
-		HvLpIndex lp)
-{
-	/*
-	 * This is a new function in V5R1 so calls to this on older
-	 * hypervisors will return -1
-	 */
-	u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp);
-	if (retVal == -1)
-		retVal = 0;
-	return retVal;
-}
-
-static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void)
-{
-	return HvLpConfig_getVirtualLanIndexMapForLp(
-			HvLpConfig_getLpIndex_outline());
-}
-
-static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1,
-		HvLpIndex lp2)
-{
-	HvLpVirtualLanIndexMap virtualLanIndexMap1 =
-		HvLpConfig_getVirtualLanIndexMapForLp(lp1);
-	HvLpVirtualLanIndexMap virtualLanIndexMap2 =
-		HvLpConfig_getVirtualLanIndexMapForLp(lp2);
-	return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0);
-}
-
-static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp)
-{
-	return HvCall1(HvCallCfgGetHostingLpIndex, lp);
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */
diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/include/asm-powerpc/iseries/hv_lp_event.h
deleted file mode 100644
index 8f5da7d77202..000000000000
--- a/include/asm-powerpc/iseries/hv_lp_event.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-/* This file contains the class for HV events in the system. */
-
-#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
-#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
-
-#include <asm/types.h>
-#include <asm/ptrace.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_call_event.h>
-
-/*
- * HvLpEvent is the structure for Lp Event messages passed between
- * partitions through PLIC.
- */
-
-struct HvLpEvent {
-	u8	flags;			/* Event flags		      x00-x00 */
-	u8	xType;			/* Type of message	      x01-x01 */
-	u16	xSubtype;		/* Subtype for event	      x02-x03 */
-	u8	xSourceLp;		/* Source LP		      x04-x04 */
-	u8	xTargetLp;		/* Target LP		      x05-x05 */
-	u8	xSizeMinus1;		/* Size of Derived class - 1  x06-x06 */
-	u8	xRc;			/* RC for Ack flows	      x07-x07 */
-	u16	xSourceInstanceId;	/* Source sides instance id   x08-x09 */
-	u16	xTargetInstanceId;	/* Target sides instance id   x0A-x0B */
-	union {
-		u32	xSubtypeData;	/* Data usable by the subtype x0C-x0F */
-		u16	xSubtypeDataShort[2];	/* Data as 2 shorts */
-		u8	xSubtypeDataChar[4];	/* Data as 4 chars */
-	} x;
-
-	u64	xCorrelationToken;	/* Unique value for source/type x10-x17 */
-};
-
-typedef void (*LpEventHandler)(struct HvLpEvent *);
-
-/* Register a handler for an event type - returns 0 on success */
-extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType,
-		LpEventHandler hdlr);
-
-/*
- * Unregister a handler for an event type
- *
- * This call will sleep until the handler being removed is guaranteed to
- * be no longer executing on any CPU. Do not call with locks held.
- *
- *  returns 0 on success
- *  Unregister will fail if there are any paths open for the type
- */
-extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType);
-
-/*
- * Open an Lp Event Path for an event type
- * returns 0 on success
- * openPath will fail if there is no handler registered for the event type.
- * The lpIndex specified is the partition index for the target partition
- * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero)
- */
-extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
-
-/*
- * Close an Lp Event Path for a type and partition
- * returns 0 on success
- */
-extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
-
-#define HvLpEvent_Type_Hypervisor 0
-#define HvLpEvent_Type_MachineFac 1
-#define HvLpEvent_Type_SessionMgr 2
-#define HvLpEvent_Type_SpdIo      3
-#define HvLpEvent_Type_VirtualBus 4
-#define HvLpEvent_Type_PciIo      5
-#define HvLpEvent_Type_RioIo      6
-#define HvLpEvent_Type_VirtualLan 7
-#define HvLpEvent_Type_VirtualIo  8
-#define HvLpEvent_Type_NumTypes   9
-
-#define HvLpEvent_Rc_Good 0
-#define HvLpEvent_Rc_BufferNotAvailable 1
-#define HvLpEvent_Rc_Cancelled 2
-#define HvLpEvent_Rc_GenericError 3
-#define HvLpEvent_Rc_InvalidAddress 4
-#define HvLpEvent_Rc_InvalidPartition 5
-#define HvLpEvent_Rc_InvalidSize 6
-#define HvLpEvent_Rc_InvalidSubtype 7
-#define HvLpEvent_Rc_InvalidSubtypeData 8
-#define HvLpEvent_Rc_InvalidType 9
-#define HvLpEvent_Rc_PartitionDead 10
-#define HvLpEvent_Rc_PathClosed 11
-#define HvLpEvent_Rc_SubtypeError 12
-
-#define HvLpEvent_Function_Ack 0
-#define HvLpEvent_Function_Int 1
-
-#define HvLpEvent_AckInd_NoAck 0
-#define HvLpEvent_AckInd_DoAck 1
-
-#define HvLpEvent_AckType_ImmediateAck 0
-#define HvLpEvent_AckType_DeferredAck 1
-
-#define HV_LP_EVENT_INT			0x01
-#define HV_LP_EVENT_DO_ACK		0x02
-#define HV_LP_EVENT_DEFERRED_ACK	0x04
-#define HV_LP_EVENT_VALID		0x80
-
-#define HvLpDma_Direction_LocalToRemote 0
-#define HvLpDma_Direction_RemoteToLocal 1
-
-#define HvLpDma_AddressType_TceIndex 0
-#define HvLpDma_AddressType_RealAddress 1
-
-#define HvLpDma_Rc_Good 0
-#define HvLpDma_Rc_Error 1
-#define HvLpDma_Rc_PartitionDead 2
-#define HvLpDma_Rc_PathClosed 3
-#define HvLpDma_Rc_InvalidAddress 4
-#define HvLpDma_Rc_InvalidLength 5
-
-static inline int hvlpevent_is_valid(struct HvLpEvent *h)
-{
-	return h->flags & HV_LP_EVENT_VALID;
-}
-
-static inline void hvlpevent_invalidate(struct HvLpEvent *h)
-{
-	h->flags &= ~ HV_LP_EVENT_VALID;
-}
-
-static inline int hvlpevent_is_int(struct HvLpEvent *h)
-{
-	return h->flags & HV_LP_EVENT_INT;
-}
-
-static inline int hvlpevent_is_ack(struct HvLpEvent *h)
-{
-	return !hvlpevent_is_int(h);
-}
-
-static inline int hvlpevent_need_ack(struct HvLpEvent *h)
-{
-	return h->flags & HV_LP_EVENT_DO_ACK;
-}
-
-#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */
diff --git a/include/asm-powerpc/iseries/hv_types.h b/include/asm-powerpc/iseries/hv_types.h
deleted file mode 100644
index c3e6d2a1d1c3..000000000000
--- a/include/asm-powerpc/iseries/hv_types.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H
-#define _ASM_POWERPC_ISERIES_HV_TYPES_H
-
-/*
- * General typedefs for the hypervisor.
- */
-
-#include <asm/types.h>
-
-typedef u8	HvLpIndex;
-typedef u16	HvLpInstanceId;
-typedef u64	HvLpTOD;
-typedef u64	HvLpSystemSerialNum;
-typedef u8	HvLpDeviceSerialNum[12];
-typedef u16	HvLpSanHwSet;
-typedef u16	HvLpBus;
-typedef u16	HvLpBoard;
-typedef u16	HvLpCard;
-typedef u8	HvLpDeviceType[4];
-typedef u8	HvLpDeviceModel[3];
-typedef u64	HvIoToken;
-typedef u8	HvLpName[8];
-typedef u32	HvIoId;
-typedef u64	HvRealMemoryIndex;
-typedef u32	HvLpIndexMap;	/* Must hold HVMAXARCHITECTEDLPS bits!!! */
-typedef u16	HvLpVrmIndex;
-typedef u32	HvXmGenerationId;
-typedef u8	HvLpBusPool;
-typedef u8	HvLpSharedPoolIndex;
-typedef u16	HvLpSharedProcUnitsX100;
-typedef u8	HvLpVirtualLanIndex;
-typedef u16	HvLpVirtualLanIndexMap;	/* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */
-typedef u16	HvBusNumber;	/* Hypervisor Bus Number */
-typedef u8	HvSubBusNumber;	/* Hypervisor SubBus Number */
-typedef u8	HvAgentId;	/* Hypervisor DevFn */
-
-
-#define HVMAXARCHITECTEDLPS		32
-#define HVMAXARCHITECTEDVIRTUALLANS	16
-#define HVMAXARCHITECTEDVIRTUALDISKS	32
-#define HVMAXARCHITECTEDVIRTUALCDROMS	8
-#define HVMAXARCHITECTEDVIRTUALTAPES	8
-#define HVCHUNKSIZE			(256 * 1024)
-#define HVPAGESIZE			(4 * 1024)
-#define HVLPMINMEGSPRIMARY		256
-#define HVLPMINMEGSSECONDARY		64
-#define HVCHUNKSPERMEG			4
-#define HVPAGESPERMEG			256
-#define HVPAGESPERCHUNK			64
-
-#define HvLpIndexInvalid		((HvLpIndex)0xff)
-
-/*
- * Enums for the sub-components under PLIC
- * Used in HvCall  and HvPrimaryCall
- */
-enum {
-	HvCallCompId = 0,
-	HvCallCpuCtlsCompId = 1,
-	HvCallCfgCompId = 2,
-	HvCallEventCompId = 3,
-	HvCallHptCompId = 4,
-	HvCallPciCompId = 5,
-	HvCallSlmCompId = 6,
-	HvCallSmCompId = 7,
-	HvCallSpdCompId = 8,
-	HvCallXmCompId = 9,
-	HvCallRioCompId = 10,
-	HvCallRsvd3CompId = 11,
-	HvCallRsvd2CompId = 12,
-	HvCallRsvd1CompId = 13,
-	HvCallMaxCompId = 14,
-	HvPrimaryCallCompId = 0,
-	HvPrimaryCallCfgCompId = 1,
-	HvPrimaryCallPciCompId = 2,
-	HvPrimaryCallSmCompId = 3,
-	HvPrimaryCallSpdCompId = 4,
-	HvPrimaryCallXmCompId = 5,
-	HvPrimaryCallRioCompId = 6,
-	HvPrimaryCallRsvd7CompId = 7,
-	HvPrimaryCallRsvd6CompId = 8,
-	HvPrimaryCallRsvd5CompId = 9,
-	HvPrimaryCallRsvd4CompId = 10,
-	HvPrimaryCallRsvd3CompId = 11,
-	HvPrimaryCallRsvd2CompId = 12,
-	HvPrimaryCallRsvd1CompId = 13,
-	HvPrimaryCallMaxCompId = HvCallMaxCompId
-};
-
-struct HvLpBufferList {
-	u64 addr;
-	u64 len;
-};
-
-#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */
diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h
deleted file mode 100644
index c59ee7e4bed1..000000000000
--- a/include/asm-powerpc/iseries/iommu.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _ASM_POWERPC_ISERIES_IOMMU_H
-#define _ASM_POWERPC_ISERIES_IOMMU_H
-
-/*
- * Copyright (C) 2005  Stephen Rothwell, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the:
- * Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330,
- * Boston, MA  02111-1307  USA
- */
-
-struct pci_dev;
-struct vio_dev;
-struct device_node;
-struct iommu_table;
-
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
-				       struct device_node *dn);
-
-/* Get table parameters from HV */
-extern void iommu_table_getparms_iSeries(unsigned long busno,
-		unsigned char slotno, unsigned char virtbus,
-		struct iommu_table *tbl);
-
-extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev);
-extern void iommu_vio_init(void);
-
-#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */
diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/include/asm-powerpc/iseries/it_lp_queue.h
deleted file mode 100644
index 428278838821..000000000000
--- a/include/asm-powerpc/iseries/it_lp_queue.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
-#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
-
-/*
- *	This control block defines the simple LP queue structure that is
- *	shared between the hypervisor (PLIC) and the OS in order to send
- *	events to an LP.
- */
-
-#include <asm/types.h>
-#include <asm/ptrace.h>
-
-#define IT_LP_MAX_QUEUES	8
-
-#define IT_LP_NOT_USED		0	/* Queue will not be used by PLIC */
-#define IT_LP_DEDICATED_IO	1	/* Queue dedicated to IO processor specified */
-#define IT_LP_DEDICATED_LP	2	/* Queue dedicated to LP specified */
-#define IT_LP_SHARED		3	/* Queue shared for both IO and LP */
-
-#define IT_LP_EVENT_STACK_SIZE	4096
-#define IT_LP_EVENT_MAX_SIZE	256
-#define IT_LP_EVENT_ALIGN	64
-
-struct hvlpevent_queue {
-/*
- * The hq_current_event is the pointer to the next event stack entry
- * that will become valid.  The OS must peek at this entry to determine
- * if it is valid.  PLIC will set the valid indicator as the very last
- * store into that entry.
- *
- * When the OS has completed processing of the event then it will mark
- * the event as invalid so that PLIC knows it can store into that event
- * location again.
- *
- * If the event stack fills and there are overflow events, then PLIC
- * will set the hq_overflow_pending flag in which case the OS will
- * have to fetch the additional LP events once they have drained the
- * event stack.
- *
- * The first 16-bytes are known by both the OS and PLIC.  The remainder
- * of the cache line is for use by the OS.
- */
-	u8		hq_overflow_pending;	/* 0x00 Overflow events are pending */
-	u8		hq_status;		/* 0x01 DedicatedIo or DedicatedLp or NotUsed */
-	u16		hq_proc_index;		/* 0x02 Logical Proc Index for correlation */
-	u8		hq_reserved1[12];	/* 0x04 */
-	char		*hq_current_event;	/* 0x10 */
-	char		*hq_last_event;		/* 0x18 */
-	char		*hq_event_stack;	/* 0x20 */
-	u8		hq_index;		/* 0x28 unique sequential index. */
-	u8		hq_reserved2[3];	/* 0x29-2b */
-	spinlock_t	hq_lock;
-};
-
-extern struct hvlpevent_queue hvlpevent_queue;
-
-extern int hvlpevent_is_pending(void);
-extern void process_hvlpevents(void);
-extern void setup_hvlpevent_queue(void);
-
-#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */
diff --git a/include/asm-powerpc/iseries/lpar_map.h b/include/asm-powerpc/iseries/lpar_map.h
deleted file mode 100644
index 5e9f3e128ee2..000000000000
--- a/include/asm-powerpc/iseries/lpar_map.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H
-#define _ASM_POWERPC_ISERIES_LPAR_MAP_H
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#endif
-
-/*
- * The iSeries hypervisor will set up mapping for one or more
- * ESID/VSID pairs (in SLB/segment registers) and will set up
- * mappings of one or more ranges of pages to VAs.
- * We will have the hypervisor set up the ESID->VSID mapping
- * for the four kernel segments (C-F).  With shared processors,
- * the hypervisor will clear all segment registers and reload
- * these four whenever the processor is switched from one
- * partition to another.
- */
-
-/* The Vsid and Esid identified below will be used by the hypervisor
- * to set up a memory mapping for part of the load area before giving
- * control to the Linux kernel.  The load area is 64 MB, but this must
- * not attempt to map the whole load area.  The Hashed Page Table may
- * need to be located within the load area (if the total partition size
- * is 64 MB), but cannot be mapped.  Typically, this should specify
- * to map half (32 MB) of the load area.
- *
- * The hypervisor will set up page table entries for the number of
- * pages specified.
- *
- * In 32-bit mode, the hypervisor will load all four of the
- * segment registers (identified by the low-order four bits of the
- * Esid field.  In 64-bit mode, the hypervisor will load one SLB
- * entry to map the Esid to the Vsid.
-*/
-
-#define HvEsidsToMap	2
-#define HvRangesToMap	1
-
-/* Hypervisor initially maps 32MB of the load area */
-#define HvPagesToMap	8192
-
-#ifndef __ASSEMBLY__
-struct LparMap {
-	u64	xNumberEsids;	// Number of ESID/VSID pairs
-	u64	xNumberRanges;	// Number of VA ranges to map
-	u64	xSegmentTableOffs; // Page number within load area of seg table
-	u64	xRsvd[5];
-	struct {
-		u64	xKernelEsid;	// Esid used to map kernel load
-		u64	xKernelVsid;	// Vsid used to map kernel load
-	} xEsids[HvEsidsToMap];
-	struct {
-		u64	xPages;		// Number of pages to be mapped
-		u64	xOffset;	// Offset from start of load area
-		u64	xVPN;		// Virtual Page Number
-	} xRanges[HvRangesToMap];
-};
-
-extern const struct LparMap	xLparMap;
-
-#endif /* __ASSEMBLY__ */
-
-/* the fixed address where the LparMap exists */
-#define LPARMAP_PHYS		0x7000
-
-#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */
diff --git a/include/asm-powerpc/iseries/mf.h b/include/asm-powerpc/iseries/mf.h
deleted file mode 100644
index eb851a9c9e5c..000000000000
--- a/include/asm-powerpc/iseries/mf.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2001  Troy D. Armstrong IBM Corporation
- * Copyright (C) 2004  Stephen Rothwell IBM Corporation
- *
- * This modules exists as an interface between a Linux secondary partition
- * running on an iSeries and the primary partition's Virtual Service
- * Processor (VSP) object.  The VSP has final authority over powering on/off
- * all partitions in the iSeries.  It also provides miscellaneous low-level
- * machine facility type operations.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_MF_H
-#define _ASM_POWERPC_ISERIES_MF_H
-
-#include <linux/types.h>
-
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_call_event.h>
-
-struct rtc_time;
-
-typedef void (*MFCompleteHandler)(void *clientToken, int returnCode);
-
-extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
-		unsigned size, unsigned amount, MFCompleteHandler hdlr,
-		void *userToken);
-extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
-		unsigned count, MFCompleteHandler hdlr, void *userToken);
-
-extern void mf_power_off(void);
-extern void mf_reboot(char *cmd);
-
-extern void mf_display_src(u32 word);
-extern void mf_display_progress(u16 value);
-
-extern void mf_init(void);
-
-#endif /* _ASM_POWERPC_ISERIES_MF_H */
diff --git a/include/asm-powerpc/iseries/vio.h b/include/asm-powerpc/iseries/vio.h
deleted file mode 100644
index f9ac0d00b951..000000000000
--- a/include/asm-powerpc/iseries/vio.h
+++ /dev/null
@@ -1,265 +0,0 @@
-/* -*- linux-c -*-
- *
- *  iSeries Virtual I/O Message Path header
- *
- *  Authors: Dave Boutcher <boutcher@us.ibm.com>
- *           Ryan Arnold <ryanarn@us.ibm.com>
- *           Colin Devilbiss <devilbis@us.ibm.com>
- *
- * (C) Copyright 2000 IBM Corporation
- *
- * This header file is used by the iSeries virtual I/O device
- * drivers.  It defines the interfaces to the common functions
- * (implemented in drivers/char/viopath.h) as well as defining
- * common functions and structures.  Currently (at the time I
- * wrote this comment) the iSeries virtual I/O device drivers
- * that use this are
- *   drivers/block/viodasd.c
- *   drivers/char/viocons.c
- *   drivers/char/viotape.c
- *   drivers/cdrom/viocd.c
- *
- * The iSeries virtual ethernet support (veth.c) uses a whole
- * different set of functions.
- *
- * This program is free software;  you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) anyu later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef _ASM_POWERPC_ISERIES_VIO_H
-#define _ASM_POWERPC_ISERIES_VIO_H
-
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_lp_event.h>
-
-/*
- * iSeries virtual I/O events use the subtype field in
- * HvLpEvent to figure out what kind of vio event is coming
- * in.  We use a table to route these, and this defines
- * the maximum number of distinct subtypes
- */
-#define VIO_MAX_SUBTYPES 8
-
-#define VIOMAXBLOCKDMA	12
-
-struct open_data {
-	u64	disk_size;
-	u16	max_disk;
-	u16	cylinders;
-	u16	tracks;
-	u16	sectors;
-	u16	bytes_per_sector;
-};
-
-struct rw_data {
-	u64	offset;
-	struct {
-		u32	token;
-		u32	reserved;
-		u64	len;
-	} dma_info[VIOMAXBLOCKDMA];
-};
-
-struct vioblocklpevent {
-	struct HvLpEvent	event;
-	u32			reserved;
-	u16			version;
-	u16			sub_result;
-	u16			disk;
-	u16			flags;
-	union {
-		struct open_data	open_data;
-		struct rw_data		rw_data;
-		u64			changed;
-	} u;
-};
-
-#define vioblockflags_ro   0x0001
-
-enum vioblocksubtype {
-	vioblockopen = 0x0001,
-	vioblockclose = 0x0002,
-	vioblockread = 0x0003,
-	vioblockwrite = 0x0004,
-	vioblockflush = 0x0005,
-	vioblockcheck = 0x0007
-};
-
-struct viocdlpevent {
-	struct HvLpEvent	event;
-	u32			reserved;
-	u16			version;
-	u16			sub_result;
-	u16			disk;
-	u16			flags;
-	u32			token;
-	u64			offset;		/* On open, max number of disks */
-	u64			len;		/* On open, size of the disk */
-	u32			block_size;	/* Only set on open */
-	u32			media_size;	/* Only set on open */
-};
-
-enum viocdsubtype {
-	viocdopen = 0x0001,
-	viocdclose = 0x0002,
-	viocdread = 0x0003,
-	viocdwrite = 0x0004,
-	viocdlockdoor = 0x0005,
-	viocdgetinfo = 0x0006,
-	viocdcheck = 0x0007
-};
-
-struct viotapelpevent {
-	struct HvLpEvent event;
-	u32 reserved;
-	u16 version;
-	u16 sub_type_result;
-	u16 tape;
-	u16 flags;
-	u32 token;
-	u64 len;
-	union {
-		struct {
-			u32 tape_op;
-			u32 count;
-		} op;
-		struct {
-			u32 type;
-			u32 resid;
-			u32 dsreg;
-			u32 gstat;
-			u32 erreg;
-			u32 file_no;
-			u32 block_no;
-		} get_status;
-		struct {
-			u32 block_no;
-		} get_pos;
-	} u;
-};
-
-enum viotapesubtype {
-	viotapeopen = 0x0001,
-	viotapeclose = 0x0002,
-	viotaperead = 0x0003,
-	viotapewrite = 0x0004,
-	viotapegetinfo = 0x0005,
-	viotapeop = 0x0006,
-	viotapegetpos = 0x0007,
-	viotapesetpos = 0x0008,
-	viotapegetstatus = 0x0009
-};
-
-/*
- * Each subtype can register a handler to process their events.
- * The handler must have this interface.
- */
-typedef void (vio_event_handler_t) (struct HvLpEvent * event);
-
-extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq);
-extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq);
-extern int vio_setHandler(int subtype, vio_event_handler_t * beh);
-extern int vio_clearHandler(int subtype);
-extern int viopath_isactive(HvLpIndex lp);
-extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp);
-extern HvLpInstanceId viopath_targetinst(HvLpIndex lp);
-extern void vio_set_hostlp(void);
-extern void *vio_get_event_buffer(int subtype);
-extern void vio_free_event_buffer(int subtype, void *buffer);
-
-extern struct vio_dev *vio_create_viodasd(u32 unit);
-
-extern HvLpIndex viopath_hostLp;
-extern HvLpIndex viopath_ourLp;
-
-#define VIOCHAR_MAX_DATA	200
-
-#define VIOMAJOR_SUBTYPE_MASK	0xff00
-#define VIOMINOR_SUBTYPE_MASK	0x00ff
-#define VIOMAJOR_SUBTYPE_SHIFT	8
-
-#define VIOVERSION		0x0101
-
-/*
- * This is the general structure for VIO errors; each module should have
- * a table of them, and each table should be terminated by an entry of
- * { 0, 0, NULL }.  Then, to find a specific error message, a module
- * should pass its local table and the return code.
- */
-struct vio_error_entry {
-	u16 rc;
-	int errno;
-	const char *msg;
-};
-extern const struct vio_error_entry *vio_lookup_rc(
-		const struct vio_error_entry *local_table, u16 rc);
-
-enum viosubtypes {
-	viomajorsubtype_monitor = 0x0100,
-	viomajorsubtype_blockio = 0x0200,
-	viomajorsubtype_chario = 0x0300,
-	viomajorsubtype_config = 0x0400,
-	viomajorsubtype_cdio = 0x0500,
-	viomajorsubtype_tape = 0x0600,
-	viomajorsubtype_scsi = 0x0700
-};
-
-enum vioconfigsubtype {
-	vioconfigget = 0x0001,
-};
-
-enum viorc {
-	viorc_good = 0x0000,
-	viorc_noConnection = 0x0001,
-	viorc_noReceiver = 0x0002,
-	viorc_noBufferAvailable = 0x0003,
-	viorc_invalidMessageType = 0x0004,
-	viorc_invalidRange = 0x0201,
-	viorc_invalidToken = 0x0202,
-	viorc_DMAError = 0x0203,
-	viorc_useError = 0x0204,
-	viorc_releaseError = 0x0205,
-	viorc_invalidDisk = 0x0206,
-	viorc_openRejected = 0x0301
-};
-
-/*
- * The structure of the events that flow between us and OS/400 for chario
- * events.  You can't mess with this unless the OS/400 side changes too.
- */
-struct viocharlpevent {
-	struct HvLpEvent event;
-	u32 reserved;
-	u16 version;
-	u16 subtype_result_code;
-	u8 virtual_device;
-	u8 len;
-	u8 data[VIOCHAR_MAX_DATA];
-};
-
-#define VIOCHAR_WINDOW		10
-
-enum viocharsubtype {
-	viocharopen = 0x0001,
-	viocharclose = 0x0002,
-	viochardata = 0x0003,
-	viocharack = 0x0004,
-	viocharconfig = 0x0005
-};
-
-enum viochar_rc {
-	viochar_rc_ebusy = 1
-};
-
-#endif /* _ASM_POWERPC_ISERIES_VIO_H */
diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h
deleted file mode 100644
index ae6d206728af..000000000000
--- a/include/asm-powerpc/kdebug.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_KDEBUG_H
-#define _ASM_POWERPC_KDEBUG_H
-#ifdef __KERNEL__
-
-/* Grossly misnamed. */
-enum die_val {
-	DIE_OOPS = 1,
-	DIE_IABR_MATCH,
-	DIE_DABR_MATCH,
-	DIE_BPT,
-	DIE_SSTEP,
-};
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_KDEBUG_H */
diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h
deleted file mode 100644
index f6c93c716898..000000000000
--- a/include/asm-powerpc/kdump.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _PPC64_KDUMP_H
-#define _PPC64_KDUMP_H
-
-/* Kdump kernel runs at 32 MB, change at your peril. */
-#define KDUMP_KERNELBASE	0x2000000
-
-/* How many bytes to reserve at zero for kdump. The reserve limit should
- * be greater or equal to the trampoline's end address.
- * Reserve to the end of the FWNMI area, see head_64.S */
-#define KDUMP_RESERVE_LIMIT	0x10000 /* 64K */
-
-#ifdef CONFIG_CRASH_DUMP
-
-#define KDUMP_TRAMPOLINE_START	0x0100
-#define KDUMP_TRAMPOLINE_END	0x3000
-
-#define KDUMP_MIN_TCE_ENTRIES	2048
-
-#endif /* CONFIG_CRASH_DUMP */
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_CRASH_DUMP
-
-extern void reserve_kdump_trampoline(void);
-extern void setup_kdump_trampoline(void);
-
-#else /* !CONFIG_CRASH_DUMP */
-
-static inline void reserve_kdump_trampoline(void) { ; }
-static inline void setup_kdump_trampoline(void) { ; }
-
-#endif /* CONFIG_CRASH_DUMP */
-#endif /* __ASSEMBLY__ */
-
-#endif /* __PPC64_KDUMP_H */
diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h
deleted file mode 100644
index acdcdc66f1b6..000000000000
--- a/include/asm-powerpc/kexec.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _ASM_POWERPC_KEXEC_H
-#define _ASM_POWERPC_KEXEC_H
-#ifdef __KERNEL__
-
-/*
- * Maximum page that is mapped directly into kernel memory.
- * XXX: Since we copy virt we can use any page we allocate
- */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-
-/*
- * Maximum address we can reach in physical address mode.
- * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
- */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-
-/* Maximum address we can use for the control code buffer */
-#ifdef __powerpc64__
-#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-#else
-/* TASK_SIZE, probably left over from use_mm ?? */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-#endif
-
-#define KEXEC_CONTROL_CODE_SIZE 4096
-
-/* The native architecture */
-#ifdef __powerpc64__
-#define KEXEC_ARCH KEXEC_ARCH_PPC64
-#else
-#define KEXEC_ARCH KEXEC_ARCH_PPC
-#endif
-
-#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
-
-typedef void (*crash_shutdown_t)(void);
-
-#ifdef CONFIG_KEXEC
-
-#ifdef __powerpc64__
-/*
- * This function is responsible for capturing register states if coming
- * via panic or invoking dump using sysrq-trigger.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-					struct pt_regs *oldregs)
-{
-	if (oldregs)
-		memcpy(newregs, oldregs, sizeof(*newregs));
-	else {
-		/* FIXME Merge this with xmon_save_regs ?? */
-		unsigned long tmp1, tmp2;
-		__asm__ __volatile__ (
-			"std    0,0(%2)\n"
-			"std    1,8(%2)\n"
-			"std    2,16(%2)\n"
-			"std    3,24(%2)\n"
-			"std    4,32(%2)\n"
-			"std    5,40(%2)\n"
-			"std    6,48(%2)\n"
-			"std    7,56(%2)\n"
-			"std    8,64(%2)\n"
-			"std    9,72(%2)\n"
-			"std    10,80(%2)\n"
-			"std    11,88(%2)\n"
-			"std    12,96(%2)\n"
-			"std    13,104(%2)\n"
-			"std    14,112(%2)\n"
-			"std    15,120(%2)\n"
-			"std    16,128(%2)\n"
-			"std    17,136(%2)\n"
-			"std    18,144(%2)\n"
-			"std    19,152(%2)\n"
-			"std    20,160(%2)\n"
-			"std    21,168(%2)\n"
-			"std    22,176(%2)\n"
-			"std    23,184(%2)\n"
-			"std    24,192(%2)\n"
-			"std    25,200(%2)\n"
-			"std    26,208(%2)\n"
-			"std    27,216(%2)\n"
-			"std    28,224(%2)\n"
-			"std    29,232(%2)\n"
-			"std    30,240(%2)\n"
-			"std    31,248(%2)\n"
-			"mfmsr  %0\n"
-			"std    %0, 264(%2)\n"
-			"mfctr  %0\n"
-			"std    %0, 280(%2)\n"
-			"mflr   %0\n"
-			"std    %0, 288(%2)\n"
-			"bl     1f\n"
-		"1:     mflr   %1\n"
-			"std    %1, 256(%2)\n"
-			"mtlr   %0\n"
-			"mfxer  %0\n"
-			"std    %0, 296(%2)\n"
-			: "=&r" (tmp1), "=&r" (tmp2)
-			: "b" (newregs)
-			: "memory");
-	}
-}
-#else
-/*
- * Provide a dummy definition to avoid build failures. Will remain
- * empty till crash dump support is enabled.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-					struct pt_regs *oldregs) { }
-#endif /* !__powerpc64 __ */
-
-extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
-					  master to copy new code to 0 */
-extern int crashing_cpu;
-extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
-extern cpumask_t cpus_in_sr;
-static inline int kexec_sr_activated(int cpu)
-{
-	return cpu_isset(cpu,cpus_in_sr);
-}
-
-struct kimage;
-struct pt_regs;
-extern void default_machine_kexec(struct kimage *image);
-extern int default_machine_kexec_prepare(struct kimage *image);
-extern void default_machine_crash_shutdown(struct pt_regs *regs);
-extern int crash_shutdown_register(crash_shutdown_t handler);
-extern int crash_shutdown_unregister(crash_shutdown_t handler);
-
-extern void machine_kexec_simple(struct kimage *image);
-extern void crash_kexec_secondary(struct pt_regs *regs);
-extern int overlaps_crashkernel(unsigned long start, unsigned long size);
-extern void reserve_crashkernel(void);
-
-#else /* !CONFIG_KEXEC */
-static inline int kexec_sr_activated(int cpu) { return 0; }
-static inline void crash_kexec_secondary(struct pt_regs *regs) { }
-
-static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
-	return 0;
-}
-
-static inline void reserve_crashkernel(void) { ; }
-
-static inline int crash_shutdown_register(crash_shutdown_t handler)
-{
-	return 0;
-}
-
-static inline int crash_shutdown_unregister(crash_shutdown_t handler)
-{
-	return 0;
-}
-
-#endif /* CONFIG_KEXEC */
-#endif /* ! __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h
deleted file mode 100644
index d8520ef121f9..000000000000
--- a/include/asm-powerpc/keylargo.h
+++ /dev/null
@@ -1,261 +0,0 @@
-#ifndef _ASM_POWERPC_KEYLARGO_H
-#define _ASM_POWERPC_KEYLARGO_H
-#ifdef __KERNEL__
-/*
- * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
- *
- */
-
-/* "Pangea" chipset has keylargo device-id 0x25 while core99
- * has device-id 0x22. The rev. of the pangea one is 0, so we
- * fake an artificial rev. in keylargo_rev by oring 0x100
- */
-#define KL_PANGEA_REV		0x100
-
-/* offset from base for feature control registers */
-#define KEYLARGO_MBCR		0x34	/* KL Only, Media bay control/status */
-#define KEYLARGO_FCR0		0x38
-#define KEYLARGO_FCR1		0x3c
-#define KEYLARGO_FCR2		0x40
-#define KEYLARGO_FCR3		0x44
-#define KEYLARGO_FCR4		0x48
-#define KEYLARGO_FCR5		0x4c	/* Pangea only */
-
-/* K2 aditional FCRs */
-#define K2_FCR6			0x34
-#define K2_FCR7			0x30
-#define K2_FCR8			0x2c
-#define K2_FCR9			0x28
-#define K2_FCR10		0x24
-
-/* GPIO registers */
-#define KEYLARGO_GPIO_LEVELS0		0x50
-#define KEYLARGO_GPIO_LEVELS1		0x54
-#define KEYLARGO_GPIO_EXTINT_0		0x58
-#define KEYLARGO_GPIO_EXTINT_CNT	18
-#define KEYLARGO_GPIO_0			0x6A
-#define KEYLARGO_GPIO_CNT		17
-#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE	0x80
-#define KEYLARGO_GPIO_OUTPUT_ENABLE	0x04
-#define KEYLARGO_GPIO_OUTOUT_DATA	0x01
-#define KEYLARGO_GPIO_INPUT_DATA	0x02
-
-/* K2 does only extint GPIOs and does 51 of them */
-#define K2_GPIO_EXTINT_0		0x58
-#define K2_GPIO_EXTINT_CNT		51
-
-/* Specific GPIO regs */
-
-#define KL_GPIO_MODEM_RESET		(KEYLARGO_GPIO_0+0x03)
-#define KL_GPIO_MODEM_POWER		(KEYLARGO_GPIO_0+0x02) /* Pangea */
-
-#define KL_GPIO_SOUND_POWER		(KEYLARGO_GPIO_0+0x05)
-
-/* Hrm... this one is only to be used on Pismo. It seeem to also
- * control the timebase enable on other machines. Still to be
- * experimented... --BenH.
- */
-#define KL_GPIO_FW_CABLE_POWER		(KEYLARGO_GPIO_0+0x09)
-#define KL_GPIO_TB_ENABLE		(KEYLARGO_GPIO_0+0x09)
-
-#define KL_GPIO_ETH_PHY_RESET		(KEYLARGO_GPIO_0+0x10)
-
-#define KL_GPIO_EXTINT_CPU1		(KEYLARGO_GPIO_0+0x0a)
-#define KL_GPIO_EXTINT_CPU1_ASSERT	0x04
-#define KL_GPIO_EXTINT_CPU1_RELEASE	0x38
-
-#define KL_GPIO_RESET_CPU0		(KEYLARGO_GPIO_EXTINT_0+0x03)
-#define KL_GPIO_RESET_CPU1		(KEYLARGO_GPIO_EXTINT_0+0x04)
-#define KL_GPIO_RESET_CPU2		(KEYLARGO_GPIO_EXTINT_0+0x0f)
-#define KL_GPIO_RESET_CPU3		(KEYLARGO_GPIO_EXTINT_0+0x10)
-
-#define KL_GPIO_PMU_MESSAGE_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x09)
-#define KL_GPIO_PMU_MESSAGE_BIT		KEYLARGO_GPIO_INPUT_DATA
-
-#define KL_GPIO_MEDIABAY_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x0e)
-
-#define KL_GPIO_AIRPORT_0		(KEYLARGO_GPIO_EXTINT_0+0x0a)
-#define KL_GPIO_AIRPORT_1		(KEYLARGO_GPIO_EXTINT_0+0x0d)
-#define KL_GPIO_AIRPORT_2		(KEYLARGO_GPIO_0+0x0d)
-#define KL_GPIO_AIRPORT_3		(KEYLARGO_GPIO_0+0x0e)
-#define KL_GPIO_AIRPORT_4		(KEYLARGO_GPIO_0+0x0f)
-
-/*
- * Bits in feature control register. Those bits different for K2 are
- * listed separately
- */
-#define KL_MBCR_MB0_PCI_ENABLE		0x00000800	/* exist ? */
-#define KL_MBCR_MB0_IDE_ENABLE		0x00001000
-#define KL_MBCR_MB0_FLOPPY_ENABLE	0x00002000	/* exist ? */
-#define KL_MBCR_MB0_SOUND_ENABLE	0x00004000	/* hrm... */
-#define KL_MBCR_MB0_DEV_MASK		0x00007800
-#define KL_MBCR_MB0_DEV_POWER		0x00000400
-#define KL_MBCR_MB0_DEV_RESET		0x00000200
-#define KL_MBCR_MB0_ENABLE		0x00000100
-#define KL_MBCR_MB1_PCI_ENABLE		0x08000000	/* exist ? */
-#define KL_MBCR_MB1_IDE_ENABLE		0x10000000
-#define KL_MBCR_MB1_FLOPPY_ENABLE	0x20000000	/* exist ? */
-#define KL_MBCR_MB1_SOUND_ENABLE	0x40000000	/* hrm... */
-#define KL_MBCR_MB1_DEV_MASK		0x78000000
-#define KL_MBCR_MB1_DEV_POWER		0x04000000
-#define KL_MBCR_MB1_DEV_RESET		0x02000000
-#define KL_MBCR_MB1_ENABLE		0x01000000
-
-#define KL0_SCC_B_INTF_ENABLE		0x00000001	/* (KL Only) */
-#define KL0_SCC_A_INTF_ENABLE		0x00000002
-#define KL0_SCC_SLOWPCLK		0x00000004
-#define KL0_SCC_RESET			0x00000008
-#define KL0_SCCA_ENABLE			0x00000010
-#define KL0_SCCB_ENABLE			0x00000020
-#define KL0_SCC_CELL_ENABLE		0x00000040
-#define KL0_IRDA_HIGH_BAND		0x00000100	/* (KL Only) */
-#define KL0_IRDA_SOURCE2_SEL		0x00000200	/* (KL Only) */
-#define KL0_IRDA_SOURCE1_SEL		0x00000400	/* (KL Only) */
-#define KL0_PG_USB0_PMI_ENABLE		0x00000400	/* (Pangea/Intrepid Only) */
-#define KL0_IRDA_RESET			0x00000800	/* (KL Only) */
-#define KL0_PG_USB0_REF_SUSPEND_SEL	0x00000800	/* (Pangea/Intrepid Only) */
-#define KL0_IRDA_DEFAULT1		0x00001000	/* (KL Only) */
-#define KL0_PG_USB0_REF_SUSPEND		0x00001000	/* (Pangea/Intrepid Only) */
-#define KL0_IRDA_DEFAULT0		0x00002000	/* (KL Only) */
-#define KL0_PG_USB0_PAD_SUSPEND		0x00002000	/* (Pangea/Intrepid Only) */
-#define KL0_IRDA_FAST_CONNECT		0x00004000	/* (KL Only) */
-#define KL0_PG_USB1_PMI_ENABLE		0x00004000	/* (Pangea/Intrepid Only) */
-#define KL0_IRDA_ENABLE			0x00008000	/* (KL Only) */
-#define KL0_PG_USB1_REF_SUSPEND_SEL	0x00008000	/* (Pangea/Intrepid Only) */
-#define KL0_IRDA_CLK32_ENABLE		0x00010000	/* (KL Only) */
-#define KL0_PG_USB1_REF_SUSPEND		0x00010000	/* (Pangea/Intrepid Only) */
-#define KL0_IRDA_CLK19_ENABLE		0x00020000	/* (KL Only) */
-#define KL0_PG_USB1_PAD_SUSPEND		0x00020000	/* (Pangea/Intrepid Only) */
-#define KL0_USB0_PAD_SUSPEND0		0x00040000
-#define KL0_USB0_PAD_SUSPEND1		0x00080000
-#define KL0_USB0_CELL_ENABLE		0x00100000
-#define KL0_USB1_PAD_SUSPEND0		0x00400000
-#define KL0_USB1_PAD_SUSPEND1		0x00800000
-#define KL0_USB1_CELL_ENABLE		0x01000000
-#define KL0_USB_REF_SUSPEND		0x10000000	/* (KL Only) */
-
-#define KL0_SERIAL_ENABLE		(KL0_SCC_B_INTF_ENABLE | \
-					KL0_SCC_SLOWPCLK | \
-					KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
-
-#define KL1_USB2_PMI_ENABLE		0x00000001	/* Intrepid only */
-#define KL1_AUDIO_SEL_22MCLK		0x00000002	/* KL/Pangea only */
-#define KL1_USB2_REF_SUSPEND_SEL	0x00000002	/* Intrepid only */
-#define KL1_USB2_REF_SUSPEND		0x00000004	/* Intrepid only */
-#define KL1_AUDIO_CLK_ENABLE_BIT	0x00000008	/* KL/Pangea only */
-#define KL1_USB2_PAD_SUSPEND_SEL	0x00000008	/* Intrepid only */
-#define KL1_USB2_PAD_SUSPEND0		0x00000010	/* Intrepid only */
-#define KL1_AUDIO_CLK_OUT_ENABLE	0x00000020	/* KL/Pangea only */
-#define KL1_USB2_PAD_SUSPEND1		0x00000020	/* Intrepid only */
-#define KL1_AUDIO_CELL_ENABLE		0x00000040	/* KL/Pangea only */
-#define KL1_USB2_CELL_ENABLE		0x00000040	/* Intrepid only */
-#define KL1_AUDIO_CHOOSE		0x00000080	/* KL/Pangea only */
-#define KL1_I2S0_CHOOSE			0x00000200	/* KL Only */
-#define KL1_I2S0_CELL_ENABLE		0x00000400
-#define KL1_I2S0_CLK_ENABLE_BIT		0x00001000
-#define KL1_I2S0_ENABLE			0x00002000
-#define KL1_I2S1_CELL_ENABLE		0x00020000
-#define KL1_I2S1_CLK_ENABLE_BIT		0x00080000
-#define KL1_I2S1_ENABLE			0x00100000
-#define KL1_EIDE0_ENABLE		0x00800000	/* KL/Intrepid Only */
-#define KL1_EIDE0_RESET_N		0x01000000	/* KL/Intrepid Only */
-#define KL1_EIDE1_ENABLE		0x04000000	/* KL Only */
-#define KL1_EIDE1_RESET_N		0x08000000	/* KL Only */
-#define KL1_UIDE_ENABLE			0x20000000	/* KL/Pangea Only */
-#define KL1_UIDE_RESET_N		0x40000000	/* KL/Pangea Only */
-
-#define KL2_IOBUS_ENABLE		0x00000002
-#define KL2_SLEEP_STATE_BIT		0x00000100	/* KL Only */
-#define KL2_PG_STOP_ALL_CLOCKS		0x00000100	/* Pangea Only */
-#define KL2_MPIC_ENABLE			0x00020000
-#define KL2_CARDSLOT_RESET		0x00040000	/* Pangea/Intrepid Only */
-#define KL2_ALT_DATA_OUT		0x02000000	/* KL Only ??? */
-#define KL2_MEM_IS_BIG			0x04000000
-#define KL2_CARDSEL_16			0x08000000
-
-#define KL3_SHUTDOWN_PLL_TOTAL		0x00000001	/* KL/Pangea only */
-#define KL3_SHUTDOWN_PLLKW6		0x00000002	/* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL3		0x00000002	/* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW4		0x00000004	/* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL2		0x00000004	/* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW35		0x00000008	/* KL/Pangea only */
-#define KL3_IT_SHUTDOWN_PLL1		0x00000008	/* Intrepid only */
-#define KL3_SHUTDOWN_PLLKW12		0x00000010	/* KL Only */
-#define KL3_IT_ENABLE_PLL3_SHUTDOWN	0x00000010	/* Intrepid only */
-#define KL3_PLL_RESET			0x00000020	/* KL/Pangea only */
-#define KL3_IT_ENABLE_PLL2_SHUTDOWN	0x00000020	/* Intrepid only */
-#define KL3_IT_ENABLE_PLL1_SHUTDOWN	0x00000010	/* Intrepid only */
-#define KL3_SHUTDOWN_PLL2X		0x00000080	/* KL Only */
-#define KL3_CLK66_ENABLE		0x00000100	/* KL Only */
-#define KL3_CLK49_ENABLE		0x00000200
-#define KL3_CLK45_ENABLE		0x00000400
-#define KL3_CLK31_ENABLE		0x00000800	/* KL/Pangea only */
-#define KL3_TIMER_CLK18_ENABLE		0x00001000
-#define KL3_I2S1_CLK18_ENABLE		0x00002000
-#define KL3_I2S0_CLK18_ENABLE		0x00004000
-#define KL3_VIA_CLK16_ENABLE		0x00008000	/* KL/Pangea only */
-#define KL3_IT_VIA_CLK32_ENABLE		0x00008000	/* Intrepid only */
-#define KL3_STOPPING33_ENABLED		0x00080000	/* KL Only */
-#define KL3_PG_PLL_ENABLE_TEST		0x00080000	/* Pangea Only */
-
-/* Intrepid USB bus 2, port 0,1 */
-#define KL3_IT_PORT_WAKEUP_ENABLE(p)		(0x00080000 << ((p)<<3))
-#define KL3_IT_PORT_RESUME_WAKE_EN(p)		(0x00040000 << ((p)<<3))
-#define KL3_IT_PORT_CONNECT_WAKE_EN(p)		(0x00020000 << ((p)<<3))
-#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p)	(0x00010000 << ((p)<<3))
-#define KL3_IT_PORT_RESUME_STAT(p)		(0x00300000 << ((p)<<3))
-#define KL3_IT_PORT_CONNECT_STAT(p)		(0x00200000 << ((p)<<3))
-#define KL3_IT_PORT_DISCONNECT_STAT(p)		(0x00100000 << ((p)<<3))
-
-/* Port 0,1 : bus 0, port 2,3 : bus 1 */
-#define KL4_PORT_WAKEUP_ENABLE(p)	(0x00000008 << ((p)<<3))
-#define KL4_PORT_RESUME_WAKE_EN(p)	(0x00000004 << ((p)<<3))
-#define KL4_PORT_CONNECT_WAKE_EN(p)	(0x00000002 << ((p)<<3))
-#define KL4_PORT_DISCONNECT_WAKE_EN(p)	(0x00000001 << ((p)<<3))
-#define KL4_PORT_RESUME_STAT(p)		(0x00000040 << ((p)<<3))
-#define KL4_PORT_CONNECT_STAT(p)	(0x00000020 << ((p)<<3))
-#define KL4_PORT_DISCONNECT_STAT(p)	(0x00000010 << ((p)<<3))
-
-/* Pangea and Intrepid only */
-#define KL5_VIA_USE_CLK31		0000000001	/* Pangea Only */
-#define KL5_SCC_USE_CLK31		0x00000002	/* Pangea Only */
-#define KL5_PWM_CLK32_EN		0x00000004
-#define KL5_CLK3_68_EN			0x00000010
-#define KL5_CLK32_EN			0x00000020
-
-
-/* K2 definitions */
-#define K2_FCR0_USB0_SWRESET		0x00200000
-#define K2_FCR0_USB1_SWRESET		0x02000000
-#define K2_FCR0_RING_PME_DISABLE	0x08000000
-
-#define K2_FCR1_PCI1_BUS_RESET_N	0x00000010
-#define K2_FCR1_PCI1_SLEEP_RESET_EN	0x00000020
-#define K2_FCR1_I2S0_CELL_ENABLE	0x00000400
-#define K2_FCR1_I2S0_RESET		0x00000800
-#define K2_FCR1_I2S0_CLK_ENABLE_BIT	0x00001000
-#define K2_FCR1_I2S0_ENABLE    		0x00002000
-#define K2_FCR1_PCI1_CLK_ENABLE		0x00004000
-#define K2_FCR1_FW_CLK_ENABLE		0x00008000
-#define K2_FCR1_FW_RESET_N		0x00010000
-#define K2_FCR1_I2S1_CELL_ENABLE	0x00020000
-#define K2_FCR1_I2S1_CLK_ENABLE_BIT	0x00080000
-#define K2_FCR1_I2S1_ENABLE		0x00100000
-#define K2_FCR1_GMAC_CLK_ENABLE		0x00400000
-#define K2_FCR1_GMAC_POWER_DOWN		0x00800000
-#define K2_FCR1_GMAC_RESET_N		0x01000000
-#define K2_FCR1_SATA_CLK_ENABLE		0x02000000
-#define K2_FCR1_SATA_POWER_DOWN		0x04000000
-#define K2_FCR1_SATA_RESET_N		0x08000000
-#define K2_FCR1_UATA_CLK_ENABLE		0x10000000
-#define K2_FCR1_UATA_RESET_N		0x40000000
-#define K2_FCR1_UATA_CHOOSE_CLK66	0x80000000
-
-/* Shasta definitions */
-#define SH_FCR1_I2S2_CELL_ENABLE	0x00000010
-#define SH_FCR1_I2S2_CLK_ENABLE_BIT	0x00000040
-#define SH_FCR1_I2S2_ENABLE		0x00000080
-#define SH_FCR3_I2S2_CLK18_ENABLE	0x00008000
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_KEYLARGO_H */
diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h
deleted file mode 100644
index b617dac82969..000000000000
--- a/include/asm-powerpc/kgdb.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * kgdb.h: Defines and declarations for serial line source level
- *         remote debugging of the Linux kernel using gdb.
- *
- * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifdef __KERNEL__
-#ifndef _PPC_KGDB_H
-#define _PPC_KGDB_H
-
-#ifndef __ASSEMBLY__
-
-/* Things specific to the gen550 backend. */
-struct uart_port;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_kgdb_map_scc(void);
-extern void gen550_init(int, struct uart_port *);
-
-/* Things specific to the pmac backend. */
-extern void zs_kgdb_hook(int tty_num);
-
-/* To init the kgdb engine. (called by serial hook)*/
-extern void set_debug_traps(void);
-
-/* To enter the debugger explicitly. */
-extern void breakpoint(void);
-
-/* For taking exceptions
- * these are defined in traps.c
- */
-extern int (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-/* What we bring to the party */
-int kgdb_bpt(struct pt_regs *regs);
-int kgdb_sstep(struct pt_regs *regs);
-void kgdb(struct pt_regs *regs);
-int kgdb_iabr_match(struct pt_regs *regs);
-int kgdb_dabr_match(struct pt_regs *regs);
-
-/*
- * external low-level support routines (ie macserial.c)
- */
-extern void kgdb_interruptible(int); /* control interrupts from serial */
-extern void putDebugChar(char);   /* write a single character      */
-extern char getDebugChar(void);   /* read and return a single char */
-
-#endif /* !(__ASSEMBLY__) */
-#endif /* !(_PPC_KGDB_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/kmap_types.h b/include/asm-powerpc/kmap_types.h
deleted file mode 100644
index b6bac6f61c16..000000000000
--- a/include/asm-powerpc/kmap_types.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASM_POWERPC_KMAP_TYPES_H
-#define _ASM_POWERPC_KMAP_TYPES_H
-
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_PPC_SYNC_PAGE,
-	KM_PPC_SYNC_ICACHE,
-	KM_TYPE_NR
-};
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_KMAP_TYPES_H */
diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h
deleted file mode 100644
index d0e7701fa1f6..000000000000
--- a/include/asm-powerpc/kprobes.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef _ASM_POWERPC_KPROBES_H
-#define _ASM_POWERPC_KPROBES_H
-#ifdef __KERNEL__
-/*
- *  Kernel Probes (KProbes)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
- *		Probes initial implementation ( includes suggestions from
- *		Rusty Russell).
- * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
- *		<ananth@in.ibm.com>
- */
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-
-#define  __ARCH_WANT_KPROBES_INSN_SLOT
-
-struct pt_regs;
-struct kprobe;
-
-typedef unsigned int kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION	0x7fe00008	/* trap */
-#define MAX_INSN_SIZE 1
-
-#define IS_TW(instr)		(((instr) & 0xfc0007fe) == 0x7c000008)
-#define IS_TD(instr)		(((instr) & 0xfc0007fe) == 0x7c000088)
-#define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
-#define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
-
-#ifdef CONFIG_PPC64
-/*
- * 64bit powerpc uses function descriptors.
- * Handle cases where:
- * 		- User passes a <.symbol> or <module:.symbol>
- * 		- User passes a <symbol> or <module:symbol>
- * 		- User passes a non-existant symbol, kallsyms_lookup_name
- * 		  returns 0. Don't deref the NULL pointer in that case
- */
-#define kprobe_lookup_name(name, addr)					\
-{									\
-	addr = (kprobe_opcode_t *)kallsyms_lookup_name(name);		\
-	if (addr) {							\
-		char *colon;						\
-		if ((colon = strchr(name, ':')) != NULL) {		\
-			colon++;					\
-			if (*colon != '\0' && *colon != '.')		\
-				addr = *(kprobe_opcode_t **)addr;	\
-		} else if (name[0] != '.')				\
-			addr = *(kprobe_opcode_t **)addr;		\
-	} else {							\
-		char dot_name[KSYM_NAME_LEN];				\
-		dot_name[0] = '.';					\
-		dot_name[1] = '\0';					\
-		strncat(dot_name, name, KSYM_NAME_LEN - 2);		\
-		addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \
-	}								\
-}
-
-#define is_trap(instr)	(IS_TW(instr) || IS_TD(instr) || \
-			IS_TWI(instr) || IS_TDI(instr))
-#else
-/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */
-#define is_trap(instr)	(IS_TW(instr) || IS_TWI(instr))
-#endif
-
-#define flush_insn_slot(p)	do { } while (0)
-#define kretprobe_blacklist_size 0
-
-void kretprobe_trampoline(void);
-extern void arch_remove_kprobe(struct kprobe *p);
-
-/* Architecture specific copy of original instruction */
-struct arch_specific_insn {
-	/* copy of original instruction */
-	kprobe_opcode_t *insn;
-	/*
-	 * Set in kprobes code, initially to 0. If the instruction can be
-	 * eumulated, this is set to 1, if not, to -1.
-	 */
-	int boostable;
-};
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned long status;
-	unsigned long saved_msr;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-	unsigned long kprobe_status;
-	unsigned long kprobe_saved_msr;
-	struct pt_regs jprobe_saved_regs;
-	struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-					unsigned long val, void *data);
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_KPROBES_H */
diff --git a/include/asm-powerpc/kvm.h b/include/asm-powerpc/kvm.h
deleted file mode 100644
index f993e4198d5c..000000000000
--- a/include/asm-powerpc/kvm.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2007
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __LINUX_KVM_POWERPC_H
-#define __LINUX_KVM_POWERPC_H
-
-#include <asm/types.h>
-
-struct kvm_regs {
-	__u64 pc;
-	__u64 cr;
-	__u64 ctr;
-	__u64 lr;
-	__u64 xer;
-	__u64 msr;
-	__u64 srr0;
-	__u64 srr1;
-	__u64 pid;
-
-	__u64 sprg0;
-	__u64 sprg1;
-	__u64 sprg2;
-	__u64 sprg3;
-	__u64 sprg4;
-	__u64 sprg5;
-	__u64 sprg6;
-	__u64 sprg7;
-
-	__u64 gpr[32];
-};
-
-struct kvm_sregs {
-};
-
-struct kvm_fpu {
-	__u64 fpr[32];
-};
-
-#endif /* __LINUX_KVM_POWERPC_H */
diff --git a/include/asm-powerpc/kvm_asm.h b/include/asm-powerpc/kvm_asm.h
deleted file mode 100644
index 2197764796d9..000000000000
--- a/include/asm-powerpc/kvm_asm.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2008
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_ASM_H__
-#define __POWERPC_KVM_ASM_H__
-
-/* IVPR must be 64KiB-aligned. */
-#define VCPU_SIZE_ORDER 4
-#define VCPU_SIZE_LOG   (VCPU_SIZE_ORDER + 12)
-#define VCPU_TLB_PGSZ   PPC44x_TLB_64K
-#define VCPU_SIZE_BYTES (1<<VCPU_SIZE_LOG)
-
-#define BOOKE_INTERRUPT_CRITICAL 0
-#define BOOKE_INTERRUPT_MACHINE_CHECK 1
-#define BOOKE_INTERRUPT_DATA_STORAGE 2
-#define BOOKE_INTERRUPT_INST_STORAGE 3
-#define BOOKE_INTERRUPT_EXTERNAL 4
-#define BOOKE_INTERRUPT_ALIGNMENT 5
-#define BOOKE_INTERRUPT_PROGRAM 6
-#define BOOKE_INTERRUPT_FP_UNAVAIL 7
-#define BOOKE_INTERRUPT_SYSCALL 8
-#define BOOKE_INTERRUPT_AP_UNAVAIL 9
-#define BOOKE_INTERRUPT_DECREMENTER 10
-#define BOOKE_INTERRUPT_FIT 11
-#define BOOKE_INTERRUPT_WATCHDOG 12
-#define BOOKE_INTERRUPT_DTLB_MISS 13
-#define BOOKE_INTERRUPT_ITLB_MISS 14
-#define BOOKE_INTERRUPT_DEBUG 15
-#define BOOKE_MAX_INTERRUPT 15
-
-#define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
-#define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
-
-#define RESUME_GUEST            0
-#define RESUME_GUEST_NV         RESUME_FLAG_NV
-#define RESUME_HOST             RESUME_FLAG_HOST
-#define RESUME_HOST_NV          (RESUME_FLAG_HOST|RESUME_FLAG_NV)
-
-#endif /* __POWERPC_KVM_ASM_H__ */
diff --git a/include/asm-powerpc/kvm_host.h b/include/asm-powerpc/kvm_host.h
deleted file mode 100644
index 81a69d711017..000000000000
--- a/include/asm-powerpc/kvm_host.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2007
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_HOST_H__
-#define __POWERPC_KVM_HOST_H__
-
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/kvm_types.h>
-#include <asm/kvm_asm.h>
-
-#define KVM_MAX_VCPUS 1
-#define KVM_MEMORY_SLOTS 32
-/* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS 4
-
-/* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1<<31)
-
-struct kvm;
-struct kvm_run;
-struct kvm_vcpu;
-
-struct kvm_vm_stat {
-	u32 remote_tlb_flush;
-};
-
-struct kvm_vcpu_stat {
-	u32 sum_exits;
-	u32 mmio_exits;
-	u32 dcr_exits;
-	u32 signal_exits;
-	u32 light_exits;
-	/* Account for special types of light exits: */
-	u32 itlb_real_miss_exits;
-	u32 itlb_virt_miss_exits;
-	u32 dtlb_real_miss_exits;
-	u32 dtlb_virt_miss_exits;
-	u32 syscall_exits;
-	u32 isi_exits;
-	u32 dsi_exits;
-	u32 emulated_inst_exits;
-	u32 dec_exits;
-	u32 ext_intr_exits;
-	u32 halt_wakeup;
-};
-
-struct tlbe {
-	u32 tid; /* Only the low 8 bits are used. */
-	u32 word0;
-	u32 word1;
-	u32 word2;
-};
-
-struct kvm_arch {
-};
-
-struct kvm_vcpu_arch {
-	/* Unmodified copy of the guest's TLB. */
-	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
-	/* TLB that's actually used when the guest is running. */
-	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
-	/* Pages which are referenced in the shadow TLB. */
-	struct page *shadow_pages[PPC44x_TLB_SIZE];
-	/* Copy of the host's TLB. */
-	struct tlbe host_tlb[PPC44x_TLB_SIZE];
-
-	u32 host_stack;
-	u32 host_pid;
-
-	u64 fpr[32];
-	u32 gpr[32];
-
-	u32 pc;
-	u32 cr;
-	u32 ctr;
-	u32 lr;
-	u32 xer;
-
-	u32 msr;
-	u32 mmucr;
-	u32 sprg0;
-	u32 sprg1;
-	u32 sprg2;
-	u32 sprg3;
-	u32 sprg4;
-	u32 sprg5;
-	u32 sprg6;
-	u32 sprg7;
-	u32 srr0;
-	u32 srr1;
-	u32 csrr0;
-	u32 csrr1;
-	u32 dsrr0;
-	u32 dsrr1;
-	u32 dear;
-	u32 esr;
-	u32 dec;
-	u32 decar;
-	u32 tbl;
-	u32 tbu;
-	u32 tcr;
-	u32 tsr;
-	u32 ivor[16];
-	u32 ivpr;
-	u32 pir;
-	u32 pid;
-	u32 pvr;
-	u32 ccr0;
-	u32 ccr1;
-	u32 dbcr0;
-	u32 dbcr1;
-
-	u32 last_inst;
-	u32 fault_dear;
-	u32 fault_esr;
-	gpa_t paddr_accessed;
-
-	u8 io_gpr; /* GPR used as IO source/target */
-	u8 mmio_is_bigendian;
-	u8 dcr_needed;
-	u8 dcr_is_write;
-
-	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
-
-	struct timer_list dec_timer;
-	unsigned long pending_exceptions;
-};
-
-struct kvm_guest_debug {
-	int enabled;
-	unsigned long bp[4];
-	int singlestep;
-};
-
-#endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/include/asm-powerpc/kvm_para.h b/include/asm-powerpc/kvm_para.h
deleted file mode 100644
index 2d48f6a63d0b..000000000000
--- a/include/asm-powerpc/kvm_para.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2008
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_PARA_H__
-#define __POWERPC_KVM_PARA_H__
-
-#ifdef __KERNEL__
-
-static inline int kvm_para_available(void)
-{
-	return 0;
-}
-
-static inline unsigned int kvm_arch_para_features(void)
-{
-	return 0;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __POWERPC_KVM_PARA_H__ */
diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h
deleted file mode 100644
index 5a21115228af..000000000000
--- a/include/asm-powerpc/kvm_ppc.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright IBM Corp. 2008
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#ifndef __POWERPC_KVM_PPC_H__
-#define __POWERPC_KVM_PPC_H__
-
-/* This file exists just so we can dereference kvm_vcpu, avoiding nested header
- * dependencies. */
-
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/kvm_types.h>
-#include <linux/kvm_host.h>
-
-struct kvm_tlb {
-	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
-	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
-};
-
-enum emulation_result {
-	EMULATE_DONE,         /* no further processing */
-	EMULATE_DO_MMIO,      /* kvm_run filled with MMIO request */
-	EMULATE_DO_DCR,       /* kvm_run filled with DCR request */
-	EMULATE_FAIL,         /* can't emulate this instruction */
-};
-
-extern const unsigned char exception_priority[];
-extern const unsigned char priority_exception[];
-
-extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
-extern char kvmppc_handlers_start[];
-extern unsigned long kvmppc_handler_len;
-
-extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
-extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                              unsigned int rt, unsigned int bytes,
-                              int is_bigendian);
-extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                               u32 val, unsigned int bytes, int is_bigendian);
-
-extern int kvmppc_emulate_instruction(struct kvm_run *run,
-                                      struct kvm_vcpu *vcpu);
-extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
-
-extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
-                           u64 asid, u32 flags);
-extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid);
-extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
-
-extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
-
-static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception)
-{
-	unsigned int priority = exception_priority[exception];
-	set_bit(priority, &vcpu->arch.pending_exceptions);
-}
-
-static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception)
-{
-	unsigned int priority = exception_priority[exception];
-	clear_bit(priority, &vcpu->arch.pending_exceptions);
-}
-
-/* Helper function for "full" MSR writes. No need to call this if only EE is
- * changing. */
-static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
-{
-	if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR))
-		kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR);
-
-	vcpu->arch.msr = new_msr;
-
-	if (vcpu->arch.msr & MSR_WE)
-		kvm_vcpu_block(vcpu);
-}
-
-#endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h
deleted file mode 100644
index 4d8518049f4d..000000000000
--- a/include/asm-powerpc/libata-portmap.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
-#define __ASM_POWERPC_LIBATA_PORTMAP_H
-
-#define ATA_PRIMARY_CMD	0x1F0
-#define ATA_PRIMARY_CTL	0x3F6
-#define ATA_PRIMARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 0)
-
-#define ATA_SECONDARY_CMD	0x170
-#define ATA_SECONDARY_CTL	0x376
-#define ATA_SECONDARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 1)
-
-#endif
diff --git a/include/asm-powerpc/linkage.h b/include/asm-powerpc/linkage.h
deleted file mode 100644
index e1c4ac1cc4ba..000000000000
--- a/include/asm-powerpc/linkage.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_POWERPC_LINKAGE_H
-#define _ASM_POWERPC_LINKAGE_H
-
-/* Nothing to see here... */
-
-#endif	/* _ASM_POWERPC_LINKAGE_H */
diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h
deleted file mode 100644
index 6f5fdf0a19ae..000000000000
--- a/include/asm-powerpc/lmb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT	lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT	0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */
diff --git a/include/asm-powerpc/local.h b/include/asm-powerpc/local.h
deleted file mode 100644
index 612d83276653..000000000000
--- a/include/asm-powerpc/local.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef _ARCH_POWERPC_LOCAL_H
-#define _ARCH_POWERPC_LOCAL_H
-
-#include <linux/percpu.h>
-#include <asm/atomic.h>
-
-typedef struct
-{
-	atomic_long_t a;
-} local_t;
-
-#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
-
-#define local_read(l)	atomic_long_read(&(l)->a)
-#define local_set(l,i)	atomic_long_set(&(l)->a, (i))
-
-#define local_add(i,l)	atomic_long_add((i),(&(l)->a))
-#define local_sub(i,l)	atomic_long_sub((i),(&(l)->a))
-#define local_inc(l)	atomic_long_inc(&(l)->a)
-#define local_dec(l)	atomic_long_dec(&(l)->a)
-
-static __inline__ long local_add_return(long a, local_t *l)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_add_return\n\
-	add	%0,%1,%0\n"
-	PPC405_ERR77(0,%2)
-	PPC_STLCX	"%0,0,%2 \n\
-	bne-	1b"
-	: "=&r" (t)
-	: "r" (a), "r" (&(l->a.counter))
-	: "cc", "memory");
-
-	return t;
-}
-
-#define local_add_negative(a, l)	(local_add_return((a), (l)) < 0)
-
-static __inline__ long local_sub_return(long a, local_t *l)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_sub_return\n\
-	subf	%0,%1,%0\n"
-	PPC405_ERR77(0,%2)
-	PPC_STLCX	"%0,0,%2 \n\
-	bne-	1b"
-	: "=&r" (t)
-	: "r" (a), "r" (&(l->a.counter))
-	: "cc", "memory");
-
-	return t;
-}
-
-static __inline__ long local_inc_return(local_t *l)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_inc_return\n\
-	addic	%0,%0,1\n"
-	PPC405_ERR77(0,%1)
-	PPC_STLCX	"%0,0,%1 \n\
-	bne-	1b"
-	: "=&r" (t)
-	: "r" (&(l->a.counter))
-	: "cc", "memory");
-
-	return t;
-}
-
-/*
- * local_inc_and_test - increment and test
- * @l: pointer of type local_t
- *
- * Atomically increments @l by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define local_inc_and_test(l) (local_inc_return(l) == 0)
-
-static __inline__ long local_dec_return(local_t *l)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_return\n\
-	addic	%0,%0,-1\n"
-	PPC405_ERR77(0,%1)
-	PPC_STLCX	"%0,0,%1\n\
-	bne-	1b"
-	: "=&r" (t)
-	: "r" (&(l->a.counter))
-	: "cc", "memory");
-
-	return t;
-}
-
-#define local_cmpxchg(l, o, n) \
-	(cmpxchg_local(&((l)->a.counter), (o), (n)))
-#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
-
-/**
- * local_add_unless - add unless the number is a given value
- * @l: pointer of type local_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
- */
-static __inline__ int local_add_unless(local_t *l, long a, long u)
-{
-	long t;
-
-	__asm__ __volatile__ (
-"1:"	PPC_LLARX	"%0,0,%1		# local_add_unless\n\
-	cmpw	0,%0,%3 \n\
-	beq-	2f \n\
-	add	%0,%2,%0 \n"
-	PPC405_ERR77(0,%2)
-	PPC_STLCX	"%0,0,%1 \n\
-	bne-	1b \n"
-"	subf	%0,%2,%0 \n\
-2:"
-	: "=&r" (t)
-	: "r" (&(l->a.counter)), "r" (a), "r" (u)
-	: "cc", "memory");
-
-	return t != u;
-}
-
-#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
-
-#define local_sub_and_test(a, l)	(local_sub_return((a), (l)) == 0)
-#define local_dec_and_test(l)		(local_dec_return((l)) == 0)
-
-/*
- * Atomically test *l and decrement if it is greater than 0.
- * The function returns the old value of *l minus 1.
- */
-static __inline__ long local_dec_if_positive(local_t *l)
-{
-	long t;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_if_positive\n\
-	cmpwi	%0,1\n\
-	addi	%0,%0,-1\n\
-	blt-	2f\n"
-	PPC405_ERR77(0,%1)
-	PPC_STLCX	"%0,0,%1\n\
-	bne-	1b"
-	"\n\
-2:"	: "=&b" (t)
-	: "r" (&(l->a.counter))
-	: "cc", "memory");
-
-	return t;
-}
-
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations.  Note they take
- * a variable, not an address.
- */
-
-#define __local_inc(l)		((l)->a.counter++)
-#define __local_dec(l)		((l)->a.counter++)
-#define __local_add(i,l)	((l)->a.counter+=(i))
-#define __local_sub(i,l)	((l)->a.counter-=(i))
-
-/* Need to disable preemption for the cpu local counters otherwise we could
-   still access a variable of a previous CPU in a non atomic way. */
-#define cpu_local_wrap_v(l)	 	\
-	({ local_t res__;		\
-	   preempt_disable(); 		\
-	   res__ = (l);			\
-	   preempt_enable();		\
-	   res__; })
-#define cpu_local_wrap(l)		\
-	({ preempt_disable();		\
-	   l;				\
-	   preempt_enable(); })		\
-
-#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
-#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
-#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
-#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
-#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
-#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
-
-#define __cpu_local_inc(l)	cpu_local_inc(l)
-#define __cpu_local_dec(l)	cpu_local_dec(l)
-#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
-
-#endif /* _ARCH_POWERPC_LOCAL_H */
diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h
deleted file mode 100644
index 567ed92cd91f..000000000000
--- a/include/asm-powerpc/lppaca.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * lppaca.h
- * Copyright (C) 2001  Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _ASM_POWERPC_LPPACA_H
-#define _ASM_POWERPC_LPPACA_H
-#ifdef __KERNEL__
-
-//=============================================================================
-//
-//	This control block contains the data that is shared between the
-//	hypervisor (PLIC) and the OS.
-//
-//
-//----------------------------------------------------------------------------
-#include <linux/cache.h>
-#include <asm/types.h>
-#include <asm/mmu.h>
-
-/* The Hypervisor barfs if the lppaca crosses a page boundary.  A 1k
- * alignment is sufficient to prevent this */
-struct lppaca {
-//=============================================================================
-// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
-// NOTE: The xDynXyz fields are fields that will be dynamically changed by
-// PLIC when preparing to bring a processor online or when dispatching a
-// virtual processor!
-//=============================================================================
-	u32	desc;			// Eye catcher 0xD397D781	x00-x03
-	u16	size;			// Size of this struct		x04-x05
-	u16	reserved1;		// Reserved			x06-x07
-	u16	reserved2:14;		// Reserved			x08-x09
-	u8	shared_proc:1;		// Shared processor indicator	...
-	u8	secondary_thread:1;	// Secondary thread indicator	...
-	volatile u8 dyn_proc_status:8;	// Dynamic Status of this proc	x0A-x0A
-	u8	secondary_thread_count;	// Secondary thread count	x0B-x0B
-	volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
-	volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
-	u32	decr_val;   		// Value for Decr programming 	x10-x13
-	u32	pmc_val;       		// Value for PMC regs         	x14-x17
-	volatile u32 dyn_hw_node_id;	// Dynamic Hardware Node id	x18-x1B
-	volatile u32 dyn_hw_proc_id;	// Dynamic Hardware Proc Id	x1C-x1F
-	volatile u32 dyn_pir;		// Dynamic ProcIdReg value	x20-x23
-	u32	dsei_data;           	// DSEI data                  	x24-x27
-	u64	sprg3;               	// SPRG3 value                	x28-x2F
-	u8	reserved3[80];		// Reserved			x30-x7F
-
-//=============================================================================
-// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
-//=============================================================================
-	// This Dword contains a byte for each type of interrupt that can occur.
-	// The IPI is a count while the others are just a binary 1 or 0.
-	union {
-		u64	any_int;
-		struct {
-			u16	reserved;	// Reserved - cleared by #mpasmbl
-			u8	xirr_int;	// Indicates xXirrValue is valid or Immed IO
-			u8	ipi_cnt;	// IPI Count
-			u8	decr_int;	// DECR interrupt occurred
-			u8	pdc_int;	// PDC interrupt occurred
-			u8	quantum_int;	// Interrupt quantum reached
-			u8	old_plic_deferred_ext_int;	// Old PLIC has a deferred XIRR pending
-		} fields;
-	} int_dword;
-
-	// Whenever any fields in this Dword are set then PLIC will defer the
-	// processing of external interrupts.  Note that PLIC will store the
-	// XIRR directly into the xXirrValue field so that another XIRR will
-	// not be presented until this one clears.  The layout of the low
-	// 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
-	// entire Dword is zero or not.  A non-zero value in the low order
-	// 2-bytes will result in SLIC being granted the highest thread
-	// priority upon return.  A 0 will return to SLIC as medium priority.
-	u64	plic_defer_ints_area;	// Entire Dword
-
-	// Used to pass the real SRR0/1 from PLIC to SLIC as well as to
-	// pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
-	u64	saved_srr0;		// Saved SRR0                   x10-x17
-	u64	saved_srr1;		// Saved SRR1                   x18-x1F
-
-	// Used to pass parms from the OS to PLIC for SetAsrAndRfid
-	u64	saved_gpr3;		// Saved GPR3                   x20-x27
-	u64	saved_gpr4;		// Saved GPR4                   x28-x2F
-	u64	saved_gpr5;		// Saved GPR5                   x30-x37
-
-	u8	reserved4;		// Reserved			x38-x38
-	u8	donate_dedicated_cpu;	// Donate dedicated CPU cycles  x39-x39
-	u8	fpregs_in_use;		// FP regs in use               x3A-x3A
-	u8	pmcregs_in_use;		// PMC regs in use              x3B-x3B
-	volatile u32 saved_decr;	// Saved Decr Value             x3C-x3F
-	volatile u64 emulated_time_base;// Emulated TB for this thread  x40-x47
-	volatile u64 cur_plic_latency;	// Unaccounted PLIC latency     x48-x4F
-	u64	tot_plic_latency;	// Accumulated PLIC latency     x50-x57
-	u64	wait_state_cycles;	// Wait cycles for this proc    x58-x5F
-	u64	end_of_quantum;		// TB at end of quantum         x60-x67
-	u64	pdc_saved_sprg1;	// Saved SPRG1 for PMC int      x68-x6F
-	u64	pdc_saved_srr0;		// Saved SRR0 for PMC int       x70-x77
-	volatile u32 virtual_decr;	// Virtual DECR for shared procsx78-x7B
-	u16	slb_count;		// # of SLBs to maintain        x7C-x7D
-	u8	idle;			// Indicate OS is idle          x7E
-	u8	vmxregs_in_use;		// VMX registers in use         x7F
-
-
-//=============================================================================
-// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors
-//=============================================================================
-	// This is the yield_count.  An "odd" value (low bit on) means that
-	// the processor is yielded (either because of an OS yield or a PLIC
-	// preempt).  An even value implies that the processor is currently
-	// executing.
-	// NOTE: This value will ALWAYS be zero for dedicated processors and
-	// will NEVER be zero for shared processors (ie, initialized to a 1).
-	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
-	u8	reserved6[124];		// Reserved                     x04-x7F
-
-//=============================================================================
-// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
-//=============================================================================
-	u8	pmc_save_area[256];	// PMC interrupt Area           x00-xFF
-} __attribute__((__aligned__(0x400)));
-
-extern struct lppaca lppaca[];
-
-/*
- * SLB shadow buffer structure as defined in the PAPR.  The save_area
- * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
- * ESID is stored in the lower 64bits, then the VSID.
- */
-struct slb_shadow {
-	u32	persistent;		// Number of persistent SLBs	x00-x03
-	u32	buffer_length;		// Total shadow buffer length	x04-x07
-	u64	reserved;		// Alignment			x08-x0f
-	struct	{
-		u64     esid;
-		u64	vsid;
-	} save_area[SLB_NUM_BOLTED];	//				x10-x40
-} ____cacheline_aligned;
-
-extern struct slb_shadow slb_shadow[];
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/include/asm-powerpc/lv1call.h b/include/asm-powerpc/lv1call.h
deleted file mode 100644
index 81713acf7529..000000000000
--- a/include/asm-powerpc/lv1call.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- *  PS3 hvcall interface.
- *
- *  Copyright (C) 2006 Sony Computer Entertainment Inc.
- *  Copyright 2006 Sony Corp.
- *  Copyright 2003, 2004 (c) MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(_ASM_POWERPC_LV1CALL_H)
-#define _ASM_POWERPC_LV1CALL_H
-
-#if !defined(__ASSEMBLY__)
-
-#include <linux/types.h>
-
-/* lv1 call declaration macros */
-
-#define LV1_1_IN_ARG_DECL u64 in_1
-#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2
-#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3
-#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4
-#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5
-#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6
-#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7
-#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8
-#define LV1_1_OUT_ARG_DECL u64 *out_1
-#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2
-#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3
-#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4
-#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5
-#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6
-#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7
-
-#define LV1_0_IN_0_OUT_ARG_DECL void
-#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL
-#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL
-#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL
-#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL
-#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL
-#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL
-#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL
-
-#define LV1_0_IN_1_OUT_ARG_DECL                    LV1_1_OUT_ARG_DECL
-#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
-
-#define LV1_0_IN_2_OUT_ARG_DECL                    LV1_2_OUT_ARG_DECL
-#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
-
-#define LV1_0_IN_3_OUT_ARG_DECL                    LV1_3_OUT_ARG_DECL
-#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
-
-#define LV1_0_IN_4_OUT_ARG_DECL                    LV1_4_OUT_ARG_DECL
-#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
-
-#define LV1_0_IN_5_OUT_ARG_DECL                    LV1_5_OUT_ARG_DECL
-#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
-
-#define LV1_0_IN_6_OUT_ARG_DECL                    LV1_6_OUT_ARG_DECL
-#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
-
-#define LV1_0_IN_7_OUT_ARG_DECL                    LV1_7_OUT_ARG_DECL
-#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
-
-#define LV1_1_IN_ARGS in_1
-#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2
-#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3
-#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4
-#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5
-#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6
-#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7
-#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8
-
-#define LV1_1_OUT_ARGS out_1
-#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2
-#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3
-#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4
-#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5
-#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6
-#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7
-
-#define LV1_0_IN_0_OUT_ARGS
-#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS
-#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS
-#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS
-#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS
-#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS
-#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS
-#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS
-
-#define LV1_0_IN_1_OUT_ARGS                LV1_1_OUT_ARGS
-#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS
-#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS
-
-#define LV1_0_IN_2_OUT_ARGS                LV1_2_OUT_ARGS
-#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS
-#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS
-
-#define LV1_0_IN_3_OUT_ARGS                LV1_3_OUT_ARGS
-#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS
-#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS
-
-#define LV1_0_IN_4_OUT_ARGS                LV1_4_OUT_ARGS
-#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS
-#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS
-
-#define LV1_0_IN_5_OUT_ARGS                LV1_5_OUT_ARGS
-#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS
-#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS
-
-#define LV1_0_IN_6_OUT_ARGS                LV1_6_OUT_ARGS
-#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS
-#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS
-
-#define LV1_0_IN_7_OUT_ARGS                LV1_7_OUT_ARGS
-#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS
-#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS
-
-/*
- * This LV1_CALL() macro is for use by callers.  It expands into an
- * inline call wrapper and an underscored HV call declaration.  The
- * wrapper can be used to instrument the lv1 call interface.  The
- * file lv1call.S defines its own LV1_CALL() macro to expand into
- * the actual underscored call definition.
- */
-
-#if !defined(LV1_CALL)
-#define LV1_CALL(name, in, out, num)                               \
-  extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL);      \
-  static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \
-    {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);}
-#endif
-
-#endif /* !defined(__ASSEMBLY__) */
-
-/* lv1 call table */
-
-LV1_CALL(allocate_memory,                               4, 2,   0 )
-LV1_CALL(write_htab_entry,                              4, 0,   1 )
-LV1_CALL(construct_virtual_address_space,               3, 2,   2 )
-LV1_CALL(invalidate_htab_entries,                       5, 0,   3 )
-LV1_CALL(get_virtual_address_space_id_of_ppe,           1, 1,   4 )
-LV1_CALL(query_logical_partition_address_region_info,   1, 5,   6 )
-LV1_CALL(select_virtual_address_space,                  1, 0,   7 )
-LV1_CALL(pause,                                         1, 0,   9 )
-LV1_CALL(destruct_virtual_address_space,                1, 0,  10 )
-LV1_CALL(configure_irq_state_bitmap,                    3, 0,  11 )
-LV1_CALL(connect_irq_plug_ext,                          5, 0,  12 )
-LV1_CALL(release_memory,                                1, 0,  13 )
-LV1_CALL(put_iopte,                                     5, 0,  15 )
-LV1_CALL(disconnect_irq_plug_ext,                       3, 0,  17 )
-LV1_CALL(construct_event_receive_port,                  0, 1,  18 )
-LV1_CALL(destruct_event_receive_port,                   1, 0,  19 )
-LV1_CALL(send_event_locally,                            1, 0,  24 )
-LV1_CALL(end_of_interrupt,                              1, 0,  27 )
-LV1_CALL(connect_irq_plug,                              2, 0,  28 )
-LV1_CALL(disconnect_irq_plug,                           1, 0,  29 )
-LV1_CALL(end_of_interrupt_ext,                          3, 0,  30 )
-LV1_CALL(did_update_interrupt_mask,                     2, 0,  31 )
-LV1_CALL(shutdown_logical_partition,                    1, 0,  44 )
-LV1_CALL(destruct_logical_spe,                          1, 0,  54 )
-LV1_CALL(construct_logical_spe,                         7, 6,  57 )
-LV1_CALL(set_spe_interrupt_mask,                        3, 0,  61 )
-LV1_CALL(set_spe_transition_notifier,                   3, 0,  64 )
-LV1_CALL(disable_logical_spe,                           2, 0,  65 )
-LV1_CALL(clear_spe_interrupt_status,                    4, 0,  66 )
-LV1_CALL(get_spe_interrupt_status,                      2, 1,  67 )
-LV1_CALL(get_logical_ppe_id,                            0, 1,  69 )
-LV1_CALL(set_interrupt_mask,                            5, 0,  73 )
-LV1_CALL(get_logical_partition_id,                      0, 1,  74 )
-LV1_CALL(configure_execution_time_variable,             1, 0,  77 )
-LV1_CALL(get_spe_irq_outlet,                            2, 1,  78 )
-LV1_CALL(set_spe_privilege_state_area_1_register,       3, 0,  79 )
-LV1_CALL(create_repository_node,                        6, 0,  90 )
-LV1_CALL(get_repository_node_value,                     5, 2,  91 )
-LV1_CALL(modify_repository_node_value,                  6, 0,  92 )
-LV1_CALL(remove_repository_node,                        4, 0,  93 )
-LV1_CALL(read_htab_entries,                             2, 5,  95 )
-LV1_CALL(set_dabr,                                      2, 0,  96 )
-LV1_CALL(get_total_execution_time,                      2, 1, 103 )
-LV1_CALL(allocate_io_segment,                           3, 1, 116 )
-LV1_CALL(release_io_segment,                            2, 0, 117 )
-LV1_CALL(construct_io_irq_outlet,                       1, 1, 120 )
-LV1_CALL(destruct_io_irq_outlet,                        1, 0, 121 )
-LV1_CALL(map_htab,                                      1, 1, 122 )
-LV1_CALL(unmap_htab,                                    1, 0, 123 )
-LV1_CALL(get_version_info,                              0, 1, 127 )
-LV1_CALL(insert_htab_entry,                             6, 3, 158 )
-LV1_CALL(read_virtual_uart,                             3, 1, 162 )
-LV1_CALL(write_virtual_uart,                            3, 1, 163 )
-LV1_CALL(set_virtual_uart_param,                        3, 0, 164 )
-LV1_CALL(get_virtual_uart_param,                        2, 1, 165 )
-LV1_CALL(configure_virtual_uart_irq,                    1, 1, 166 )
-LV1_CALL(open_device,                                   3, 0, 170 )
-LV1_CALL(close_device,                                  2, 0, 171 )
-LV1_CALL(map_device_mmio_region,                        5, 1, 172 )
-LV1_CALL(unmap_device_mmio_region,                      3, 0, 173 )
-LV1_CALL(allocate_device_dma_region,                    5, 1, 174 )
-LV1_CALL(free_device_dma_region,                        3, 0, 175 )
-LV1_CALL(map_device_dma_region,                         6, 0, 176 )
-LV1_CALL(unmap_device_dma_region,                       4, 0, 177 )
-LV1_CALL(net_add_multicast_address,                     4, 0, 185 )
-LV1_CALL(net_remove_multicast_address,                  4, 0, 186 )
-LV1_CALL(net_start_tx_dma,                              4, 0, 187 )
-LV1_CALL(net_stop_tx_dma,                               3, 0, 188 )
-LV1_CALL(net_start_rx_dma,                              4, 0, 189 )
-LV1_CALL(net_stop_rx_dma,                               3, 0, 190 )
-LV1_CALL(net_set_interrupt_status_indicator,            4, 0, 191 )
-LV1_CALL(net_set_interrupt_mask,                        4, 0, 193 )
-LV1_CALL(net_control,                                   6, 2, 194 )
-LV1_CALL(connect_interrupt_event_receive_port,          4, 0, 197 )
-LV1_CALL(disconnect_interrupt_event_receive_port,       4, 0, 198 )
-LV1_CALL(get_spe_all_interrupt_statuses,                1, 1, 199 )
-LV1_CALL(deconfigure_virtual_uart_irq,                  0, 0, 202 )
-LV1_CALL(enable_logical_spe,                            2, 0, 207 )
-LV1_CALL(gpu_open,                                      1, 0, 210 )
-LV1_CALL(gpu_close,                                     0, 0, 211 )
-LV1_CALL(gpu_device_map,                                1, 2, 212 )
-LV1_CALL(gpu_device_unmap,                              1, 0, 213 )
-LV1_CALL(gpu_memory_allocate,                           5, 2, 214 )
-LV1_CALL(gpu_memory_free,                               1, 0, 216 )
-LV1_CALL(gpu_context_allocate,                          2, 5, 217 )
-LV1_CALL(gpu_context_free,                              1, 0, 218 )
-LV1_CALL(gpu_context_iomap,                             5, 0, 221 )
-LV1_CALL(gpu_context_attribute,                         6, 0, 225 )
-LV1_CALL(gpu_context_intr,                              1, 1, 227 )
-LV1_CALL(gpu_attribute,                                 5, 0, 228 )
-LV1_CALL(get_rtc,                                       0, 2, 232 )
-LV1_CALL(set_ppe_periodic_tracer_frequency,             1, 0, 240 )
-LV1_CALL(start_ppe_periodic_tracer,                     5, 0, 241 )
-LV1_CALL(stop_ppe_periodic_tracer,                      1, 1, 242 )
-LV1_CALL(storage_read,                                  6, 1, 245 )
-LV1_CALL(storage_write,                                 6, 1, 246 )
-LV1_CALL(storage_send_device_command,                   6, 1, 248 )
-LV1_CALL(storage_get_async_status,                      1, 2, 249 )
-LV1_CALL(storage_check_async_status,                    2, 1, 254 )
-LV1_CALL(panic,                                         1, 0, 255 )
-LV1_CALL(construct_lpm,                                 6, 3, 140 )
-LV1_CALL(destruct_lpm,                                  1, 0, 141 )
-LV1_CALL(start_lpm,                                     1, 0, 142 )
-LV1_CALL(stop_lpm,                                      1, 1, 143 )
-LV1_CALL(copy_lpm_trace_buffer,                         3, 1, 144 )
-LV1_CALL(add_lpm_event_bookmark,                        5, 0, 145 )
-LV1_CALL(delete_lpm_event_bookmark,                     3, 0, 146 )
-LV1_CALL(set_lpm_interrupt_mask,                        3, 1, 147 )
-LV1_CALL(get_lpm_interrupt_status,                      1, 1, 148 )
-LV1_CALL(set_lpm_general_control,                       5, 2, 149 )
-LV1_CALL(set_lpm_interval,                              3, 1, 150 )
-LV1_CALL(set_lpm_trigger_control,                       3, 1, 151 )
-LV1_CALL(set_lpm_counter_control,                       4, 1, 152 )
-LV1_CALL(set_lpm_group_control,                         3, 1, 153 )
-LV1_CALL(set_lpm_debug_bus_control,                     3, 1, 154 )
-LV1_CALL(set_lpm_counter,                               5, 2, 155 )
-LV1_CALL(set_lpm_signal,                                7, 0, 156 )
-LV1_CALL(set_lpm_spr_trigger,                           2, 0, 157 )
-
-#endif
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
deleted file mode 100644
index 989922621e35..000000000000
--- a/include/asm-powerpc/machdep.h
+++ /dev/null
@@ -1,364 +0,0 @@
-#ifndef _ASM_POWERPC_MACHDEP_H
-#define _ASM_POWERPC_MACHDEP_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/setup.h>
-
-/* We export this macro for external modules like Alsa to know if
- * ppc_md.feature_call is implemented or not
- */
-#define CONFIG_PPC_HAS_FEATURE_CALLS
-
-struct pt_regs;
-struct pci_bus;	
-struct device_node;
-struct iommu_table;
-struct rtc_time;
-struct file;
-struct pci_controller;
-#ifdef CONFIG_KEXEC
-struct kimage;
-#endif
-
-#ifdef CONFIG_SMP
-struct smp_ops_t {
-	void  (*message_pass)(int target, int msg);
-	int   (*probe)(void);
-	void  (*kick_cpu)(int nr);
-	void  (*setup_cpu)(int nr);
-	void  (*take_timebase)(void);
-	void  (*give_timebase)(void);
-	int   (*cpu_enable)(unsigned int nr);
-	int   (*cpu_disable)(void);
-	void  (*cpu_die)(unsigned int nr);
-	int   (*cpu_bootable)(unsigned int nr);
-};
-#endif
-
-struct machdep_calls {
-	char		*name;
-#ifdef CONFIG_PPC64
-	void            (*hpte_invalidate)(unsigned long slot,
-					   unsigned long va,
-					   int psize, int ssize,
-					   int local);
-	long		(*hpte_updatepp)(unsigned long slot, 
-					 unsigned long newpp, 
-					 unsigned long va,
-					 int psize, int ssize,
-					 int local);
-	void            (*hpte_updateboltedpp)(unsigned long newpp, 
-					       unsigned long ea,
-					       int psize, int ssize);
-	long		(*hpte_insert)(unsigned long hpte_group,
-				       unsigned long va,
-				       unsigned long prpn,
-				       unsigned long rflags,
-				       unsigned long vflags,
-				       int psize, int ssize);
-	long		(*hpte_remove)(unsigned long hpte_group);
-	void            (*hpte_removebolted)(unsigned long ea,
-					     int psize, int ssize);
-	void		(*flush_hash_range)(unsigned long number, int local);
-
-	/* special for kexec, to be called in real mode, linar mapping is
-	 * destroyed as well */
-	void		(*hpte_clear_all)(void);
-
-	void		(*tce_build)(struct iommu_table * tbl,
-				     long index,
-				     long npages,
-				     unsigned long uaddr,
-				     enum dma_data_direction direction);
-	void		(*tce_free)(struct iommu_table *tbl,
-				    long index,
-				    long npages);
-	unsigned long	(*tce_get)(struct iommu_table *tbl,
-				    long index);
-	void		(*tce_flush)(struct iommu_table *tbl);
-	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
-	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
-
-	void __iomem *	(*ioremap)(phys_addr_t addr, unsigned long size,
-				   unsigned long flags);
-	void		(*iounmap)(volatile void __iomem *token);
-
-#ifdef CONFIG_PM
-	void		(*iommu_save)(void);
-	void		(*iommu_restore)(void);
-#endif
-#endif /* CONFIG_PPC64 */
-
-	int		(*probe)(void);
-	void		(*setup_arch)(void); /* Optional, may be NULL */
-	void		(*init_early)(void);
-	/* Optional, may be NULL. */
-	void		(*show_cpuinfo)(struct seq_file *m);
-	void		(*show_percpuinfo)(struct seq_file *m, int i);
-
-	void		(*init_IRQ)(void);
-	unsigned int	(*get_irq)(void);
-#ifdef CONFIG_KEXEC
-	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
-#endif
-
-	/* PCI stuff */
-	/* Called after scanning the bus, before allocating resources */
-	void		(*pcibios_fixup)(void);
-	int		(*pci_probe_mode)(struct pci_bus *);
-	void		(*pci_irq_fixup)(struct pci_dev *dev);
-
-	/* To setup PHBs when using automatic OF platform driver for PCI */
-	int		(*pci_setup_phb)(struct pci_controller *host);
-
-#ifdef CONFIG_PCI_MSI
-	int		(*msi_check_device)(struct pci_dev* dev,
-					    int nvec, int type);
-	int		(*setup_msi_irqs)(struct pci_dev *dev,
-					  int nvec, int type);
-	void		(*teardown_msi_irqs)(struct pci_dev *dev);
-#endif
-
-	void		(*restart)(char *cmd);
-	void		(*power_off)(void);
-	void		(*halt)(void);
-	void		(*panic)(char *str);
-	void		(*cpu_die)(void);
-
-	long		(*time_init)(void); /* Optional, may be NULL */
-
-	int		(*set_rtc_time)(struct rtc_time *);
-	void		(*get_rtc_time)(struct rtc_time *);
-	unsigned long	(*get_boot_time)(void);
-	unsigned char 	(*rtc_read_val)(int addr);
-	void		(*rtc_write_val)(int addr, unsigned char val);
-
-	void		(*calibrate_decr)(void);
-
-	void		(*progress)(char *, unsigned short);
-
-	/* Interface for platform error logging */
-	void 		(*log_error)(char *buf, unsigned int err_type, int fatal);
-
-	unsigned char 	(*nvram_read_val)(int addr);
-	void		(*nvram_write_val)(int addr, unsigned char val);
-	ssize_t		(*nvram_write)(char *buf, size_t count, loff_t *index);
-	ssize_t		(*nvram_read)(char *buf, size_t count, loff_t *index);	
-	ssize_t		(*nvram_size)(void);		
-	void		(*nvram_sync)(void);
-
-	/* Exception handlers */
-	int		(*system_reset_exception)(struct pt_regs *regs);
-	int 		(*machine_check_exception)(struct pt_regs *regs);
-
-	/* Motherboard/chipset features. This is a kind of general purpose
-	 * hook used to control some machine specific features (like reset
-	 * lines, chip power control, etc...).
-	 */
-	long	 	(*feature_call)(unsigned int feature, ...);
-
-	/* Get legacy PCI/IDE interrupt mapping */ 
-	int		(*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel);
-	
-	/* Get access protection for /dev/mem */
-	pgprot_t	(*phys_mem_access_prot)(struct file *file,
-						unsigned long pfn,
-						unsigned long size,
-						pgprot_t vma_prot);
-
-	/* Idle loop for this platform, leave empty for default idle loop */
-	void		(*idle_loop)(void);
-
-	/*
-	 * Function for waiting for work with reduced power in idle loop;
-	 * called with interrupts disabled.
-	 */
-	void		(*power_save)(void);
-
-	/* Function to enable performance monitor counters for this
-	   platform, called once per cpu. */
-	void		(*enable_pmcs)(void);
-
-	/* Set DABR for this platform, leave empty for default implemenation */
-	int		(*set_dabr)(unsigned long dabr);
-
-#ifdef CONFIG_PPC32	/* XXX for now */
-	/* A general init function, called by ppc_init in init/main.c.
-	   May be NULL. */
-	void		(*init)(void);
-
-	void		(*kgdb_map_scc)(void);
-
-	/*
-	 * optional PCI "hooks"
-	 */
-	/* Called in indirect_* to avoid touching devices */
-	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
-	/* Called at then very end of pcibios_init() */
-	void (*pcibios_after_init)(void);
-
-#endif /* CONFIG_PPC32 */
-
-	/* Called after PPC generic resource fixup to perform
-	   machine specific fixups */
-	void (*pcibios_fixup_resources)(struct pci_dev *);
-
-	/* Called for each PCI bus in the system when it's probed */
-	void (*pcibios_fixup_bus)(struct pci_bus *);
-
-	/* Called when pci_enable_device() is called. Returns 0 to
-	 * allow assignment/enabling of the device. */
-	int  (*pcibios_enable_device_hook)(struct pci_dev *);
-
-	/* Called to shutdown machine specific hardware not already controlled
-	 * by other drivers.
-	 */
-	void (*machine_shutdown)(void);
-
-#ifdef CONFIG_KEXEC
-	/* Called to do the minimal shutdown needed to run a kexec'd kernel
-	 * to run successfully.
-	 * XXX Should we move this one out of kexec scope?
-	 */
-	void (*machine_crash_shutdown)(struct pt_regs *regs);
-
-	/* Called to do what every setup is needed on image and the
-	 * reboot code buffer. Returns 0 on success.
-	 * Provide your own (maybe dummy) implementation if your platform
-	 * claims to support kexec.
-	 */
-	int (*machine_kexec_prepare)(struct kimage *image);
-
-	/* Called to handle any machine specific cleanup on image */
-	void (*machine_kexec_cleanup)(struct kimage *image);
-
-	/* Called to perform the _real_ kexec.
-	 * Do NOT allocate memory or fail here. We are past the point of
-	 * no return.
-	 */
-	void (*machine_kexec)(struct kimage *image);
-#endif /* CONFIG_KEXEC */
-
-#ifdef CONFIG_SUSPEND
-	/* These are called to disable and enable, respectively, IRQs when
-	 * entering a suspend state.  If NULL, then the generic versions
-	 * will be called.  The generic versions disable/enable the
-	 * decrementer along with interrupts.
-	 */
-	void (*suspend_disable_irqs)(void);
-	void (*suspend_enable_irqs)(void);
-#endif
-};
-
-extern void e500_idle(void);
-extern void power4_idle(void);
-extern void power4_cpu_offline_powersave(void);
-extern void ppc6xx_idle(void);
-
-/*
- * ppc_md contains a copy of the machine description structure for the
- * current platform. machine_id contains the initial address where the
- * description was found during boot.
- */
-extern struct machdep_calls ppc_md;
-extern struct machdep_calls *machine_id;
-
-#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
-
-#define define_machine(name)					\
-	extern struct machdep_calls mach_##name;		\
-	EXPORT_SYMBOL(mach_##name);				\
-	struct machdep_calls mach_##name __machine_desc =
-
-#define machine_is(name) \
-	({ \
-		extern struct machdep_calls mach_##name \
-			__attribute__((weak));		 \
-		machine_id == &mach_##name; \
-	})
-
-extern void probe_machine(void);
-
-extern char cmd_line[COMMAND_LINE_SIZE];
-
-#ifdef CONFIG_PPC_PMAC
-/*
- * Power macintoshes have either a CUDA, PMU or SMU controlling
- * system reset, power, NVRAM, RTC.
- */
-typedef enum sys_ctrler_kind {
-	SYS_CTRLER_UNKNOWN = 0,
-	SYS_CTRLER_CUDA = 1,
-	SYS_CTRLER_PMU = 2,
-	SYS_CTRLER_SMU = 3,
-} sys_ctrler_t;
-extern sys_ctrler_t sys_ctrler;
-
-#endif /* CONFIG_PPC_PMAC */
-
-extern void setup_pci_ptrs(void);
-
-#ifdef CONFIG_SMP
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
-
-/* Functions to produce codes on the leds.
- * The SRC code should be unique for the message category and should
- * be limited to the lower 24 bits (the upper 8 are set by these funcs),
- * and (for boot & dump) should be sorted numerically in the order
- * the events occur.
- */
-/* Print a boot progress message. */
-void ppc64_boot_msg(unsigned int src, const char *msg);
-/* Print a termination message (print only -- does not stop the kernel) */
-void ppc64_terminate_msg(unsigned int src, const char *msg);
-
-static inline void log_error(char *buf, unsigned int err_type, int fatal)
-{
-	if (ppc_md.log_error)
-		ppc_md.log_error(buf, err_type, fatal);
-}
-
-#define __define_machine_initcall(mach,level,fn,id) \
-	static int __init __machine_initcall_##mach##_##fn(void) { \
-		if (machine_is(mach)) return fn(); \
-		return 0; \
-	} \
-	__define_initcall(level,__machine_initcall_##mach##_##fn,id);
-
-#define machine_core_initcall(mach,fn)		__define_machine_initcall(mach,"1",fn,1)
-#define machine_core_initcall_sync(mach,fn)	__define_machine_initcall(mach,"1s",fn,1s)
-#define machine_postcore_initcall(mach,fn)	__define_machine_initcall(mach,"2",fn,2)
-#define machine_postcore_initcall_sync(mach,fn)	__define_machine_initcall(mach,"2s",fn,2s)
-#define machine_arch_initcall(mach,fn)		__define_machine_initcall(mach,"3",fn,3)
-#define machine_arch_initcall_sync(mach,fn)	__define_machine_initcall(mach,"3s",fn,3s)
-#define machine_subsys_initcall(mach,fn)	__define_machine_initcall(mach,"4",fn,4)
-#define machine_subsys_initcall_sync(mach,fn)	__define_machine_initcall(mach,"4s",fn,4s)
-#define machine_fs_initcall(mach,fn)		__define_machine_initcall(mach,"5",fn,5)
-#define machine_fs_initcall_sync(mach,fn)	__define_machine_initcall(mach,"5s",fn,5s)
-#define machine_rootfs_initcall(mach,fn)	__define_machine_initcall(mach,"rootfs",fn,rootfs)
-#define machine_device_initcall(mach,fn)	__define_machine_initcall(mach,"6",fn,6)
-#define machine_device_initcall_sync(mach,fn)	__define_machine_initcall(mach,"6s",fn,6s)
-#define machine_late_initcall(mach,fn)		__define_machine_initcall(mach,"7",fn,7)
-#define machine_late_initcall_sync(mach,fn)	__define_machine_initcall(mach,"7s",fn,7s)
-
-void generic_suspend_disable_irqs(void);
-void generic_suspend_enable_irqs(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_MACHDEP_H */
diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h
deleted file mode 100644
index 079c06eae446..000000000000
--- a/include/asm-powerpc/macio.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef __MACIO_ASIC_H__
-#define __MACIO_ASIC_H__
-#ifdef __KERNEL__
-
-#include <linux/of_device.h>
-
-extern struct bus_type macio_bus_type;
-
-/* MacIO device driver is defined later */
-struct macio_driver;
-struct macio_chip;
-
-#define MACIO_DEV_COUNT_RESOURCES	8
-#define MACIO_DEV_COUNT_IRQS		8
-
-/*
- * the macio_bus structure is used to describe a "virtual" bus
- * within a MacIO ASIC. It's typically provided by a macio_pci_asic
- * PCI device, but could be provided differently as well (nubus
- * machines using a fake OF tree).
- *
- * The pdev field can be NULL on non-PCI machines
- */
-struct macio_bus
-{
-	struct macio_chip	*chip;		/* macio_chip (private use) */
-	int			index;		/* macio chip index in system */
-#ifdef CONFIG_PCI
-	struct pci_dev		*pdev;		/* PCI device hosting this bus */
-#endif
-};
-
-/*
- * the macio_dev structure is used to describe a device
- * within an Apple MacIO ASIC.
- */
-struct macio_dev
-{
-	struct macio_bus	*bus;		/* macio bus this device is on */
-	struct macio_dev	*media_bay;	/* Device is part of a media bay */
-	struct of_device	ofdev;
-	int			n_resources;
-	struct resource		resource[MACIO_DEV_COUNT_RESOURCES];
-	int			n_interrupts;
-	struct resource		interrupt[MACIO_DEV_COUNT_IRQS];
-};
-#define	to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
-#define	of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
-
-extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
-extern void macio_dev_put(struct macio_dev *dev);
-
-/*
- * Accessors to resources & interrupts and other device
- * fields
- */
-
-static inline int macio_resource_count(struct macio_dev *dev)
-{
-	return dev->n_resources;
-}
-
-static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
-{
-	return dev->resource[resource_no].start;
-}
-
-static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
-{
-	return dev->resource[resource_no].end;
-}
-
-static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
-{
-	struct resource *res = &dev->resource[resource_no];
-	if (res->start == 0 || res->end == 0 || res->end < res->start)
-		return 0;
-	return res->end - res->start + 1;
-}
-
-extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
-extern void macio_release_resource(struct macio_dev *dev, int resource_no);
-extern int macio_request_resources(struct macio_dev *dev, const char *name);
-extern void macio_release_resources(struct macio_dev *dev);
-
-static inline int macio_irq_count(struct macio_dev *dev)
-{
-	return dev->n_interrupts;
-}
-
-static inline int macio_irq(struct macio_dev *dev, int irq_no)
-{
-	return dev->interrupt[irq_no].start;
-}
-
-static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
-{
-	dev_set_drvdata(&dev->ofdev.dev, data);
-}
-
-static inline void* macio_get_drvdata(struct macio_dev *dev)
-{
-	return dev_get_drvdata(&dev->ofdev.dev);
-}
-
-static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
-{
-	return mdev->ofdev.node;
-}
-
-#ifdef CONFIG_PCI
-static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
-{
-	return mdev->bus->pdev;
-}
-#endif
-
-/*
- * A driver for a mac-io chip based device
- */
-struct macio_driver
-{
-	char			*name;
-	struct of_device_id	*match_table;
-	struct module		*owner;
-
-	int	(*probe)(struct macio_dev* dev, const struct of_device_id *match);
-	int	(*remove)(struct macio_dev* dev);
-
-	int	(*suspend)(struct macio_dev* dev, pm_message_t state);
-	int	(*resume)(struct macio_dev* dev);
-	int	(*shutdown)(struct macio_dev* dev);
-
-	struct device_driver	driver;
-};
-#define	to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
-
-extern int macio_register_driver(struct macio_driver *);
-extern void macio_unregister_driver(struct macio_driver *);
-
-#endif /* __KERNEL__ */
-#endif /* __MACIO_ASIC_H__ */
diff --git a/include/asm-powerpc/mc146818rtc.h b/include/asm-powerpc/mc146818rtc.h
deleted file mode 100644
index f2741c8b59a1..000000000000
--- a/include/asm-powerpc/mc146818rtc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _ASM_POWERPC_MC146818RTC_H
-#define _ASM_POWERPC_MC146818RTC_H
-
-/*
- * Machine dependent access functions for RTC registers.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __KERNEL__
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_MC146818RTC_H */
diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h
deleted file mode 100644
index b2efb3325808..000000000000
--- a/include/asm-powerpc/mediabay.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * mediabay.h: definitions for using the media bay
- * on PowerBook 3400 and similar computers.
- *
- * Copyright (C) 1997 Paul Mackerras.
- */
-#ifndef _PPC_MEDIABAY_H
-#define _PPC_MEDIABAY_H
-
-#ifdef __KERNEL__
-
-#define MB_FD		0	/* media bay contains floppy drive (automatic eject ?) */
-#define MB_FD1		1	/* media bay contains floppy drive (manual eject ?) */
-#define MB_SOUND	2	/* sound device ? */
-#define MB_CD		3	/* media bay contains ATA drive such as CD or ZIP */
-#define MB_PCI		5	/* media bay contains a PCI device */
-#define MB_POWER	6	/* media bay contains a Power device (???) */
-#define MB_NO		7	/* media bay contains nothing */
-
-/* Number of bays in the machine or 0 */
-extern int media_bay_count;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-#include <linux/ide.h>
-
-int check_media_bay_by_base(unsigned long base, int what);
-/* called by IDE PMAC host driver to register IDE controller for media bay */
-int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
-			    int irq, ide_hwif_t *hwif);
-
-int check_media_bay(struct device_node *which_bay, int what);
-
-#else
-
-static inline int check_media_bay(struct device_node *which_bay, int what)
-{
-	return -ENODEV;
-}
-
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _PPC_MEDIABAY_H */
diff --git a/include/asm-powerpc/mman.h b/include/asm-powerpc/mman.h
deleted file mode 100644
index 9209f755763e..000000000000
--- a/include/asm-powerpc/mman.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef _ASM_POWERPC_MMAN_H
-#define _ASM_POWERPC_MMAN_H
-
-#include <asm-generic/mman.h>
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define PROT_SAO	0x10		/* Strong Access Ordering */
-
-#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
-#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
-#define MAP_LOCKED	0x80
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-
-#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
-#define MCL_FUTURE      0x4000          /* lock all additions to address space */
-
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#ifdef __KERNEL__
-#ifdef CONFIG_PPC64
-
-#include <asm/cputable.h>
-#include <linux/mm.h>
-
-/*
- * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits()
- * here.  How important is the optimization?
- */
-static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
-{
-	return (prot & PROT_SAO) ? VM_SAO : 0;
-}
-#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot)
-
-static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
-{
-	return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
-}
-#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
-
-static inline int arch_validate_prot(unsigned long prot)
-{
-	if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO))
-		return 0;
-	if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO))
-		return 0;
-	return 1;
-}
-#define arch_validate_prot(prot) arch_validate_prot(prot)
-
-#endif /* CONFIG_PPC64 */
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_MMAN_H */
diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h
deleted file mode 100644
index 3d108676584c..000000000000
--- a/include/asm-powerpc/mmu-40x.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_40X_H_
-#define _ASM_POWERPC_MMU_40X_H_
-
-/*
- * PPC40x support
- */
-
-#define PPC40X_TLB_SIZE 64
-
-/*
- * TLB entries are defined by a "high" tag portion and a "low" data
- * portion.  On all architectures, the data portion is 32-bits.
- *
- * TLB entries are managed entirely under software control by reading,
- * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
- * instructions.
- */
-
-#define	TLB_LO          1
-#define	TLB_HI          0
-
-#define	TLB_DATA        TLB_LO
-#define	TLB_TAG         TLB_HI
-
-/* Tag portion */
-
-#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
-#define TLB_PAGESZ_MASK 0x00000380
-#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
-#define   PAGESZ_1K		0
-#define   PAGESZ_4K             1
-#define   PAGESZ_16K            2
-#define   PAGESZ_64K            3
-#define   PAGESZ_256K           4
-#define   PAGESZ_1M             5
-#define   PAGESZ_4M             6
-#define   PAGESZ_16M            7
-#define TLB_VALID       0x00000040      /* Entry is valid */
-
-/* Data portion */
-
-#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
-#define TLB_PERM_MASK   0x00000300
-#define TLB_EX          0x00000200      /* Instruction execution allowed */
-#define TLB_WR          0x00000100      /* Writes permitted */
-#define TLB_ZSEL_MASK   0x000000F0
-#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
-#define TLB_ATTR_MASK   0x0000000F
-#define TLB_W           0x00000008      /* Caching is write-through */
-#define TLB_I           0x00000004      /* Caching is inhibited */
-#define TLB_M           0x00000002      /* Memory is coherent */
-#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long id;
-	unsigned long vdso_base;
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/include/asm-powerpc/mmu-44x.h b/include/asm-powerpc/mmu-44x.h
deleted file mode 100644
index a825524c981a..000000000000
--- a/include/asm-powerpc/mmu-44x.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_44X_H_
-#define _ASM_POWERPC_MMU_44X_H_
-/*
- * PPC440 support
- */
-
-#define PPC44x_MMUCR_TID	0x000000ff
-#define PPC44x_MMUCR_STS	0x00010000
-
-#define	PPC44x_TLB_PAGEID	0
-#define	PPC44x_TLB_XLAT		1
-#define	PPC44x_TLB_ATTRIB	2
-
-/* Page identification fields */
-#define PPC44x_TLB_EPN_MASK	0xfffffc00      /* Effective Page Number */
-#define	PPC44x_TLB_VALID	0x00000200      /* Valid flag */
-#define PPC44x_TLB_TS		0x00000100	/* Translation address space */
-#define PPC44x_TLB_1K		0x00000000	/* Page sizes */
-#define PPC44x_TLB_4K		0x00000010
-#define PPC44x_TLB_16K		0x00000020
-#define PPC44x_TLB_64K		0x00000030
-#define PPC44x_TLB_256K		0x00000040
-#define PPC44x_TLB_1M		0x00000050
-#define PPC44x_TLB_16M		0x00000070
-#define	PPC44x_TLB_256M		0x00000090
-
-/* Translation fields */
-#define PPC44x_TLB_RPN_MASK	0xfffffc00      /* Real Page Number */
-#define	PPC44x_TLB_ERPN_MASK	0x0000000f
-
-/* Storage attribute and access control fields */
-#define PPC44x_TLB_ATTR_MASK	0x0000ff80
-#define PPC44x_TLB_U0		0x00008000      /* User 0 */
-#define PPC44x_TLB_U1		0x00004000      /* User 1 */
-#define PPC44x_TLB_U2		0x00002000      /* User 2 */
-#define PPC44x_TLB_U3		0x00001000      /* User 3 */
-#define PPC44x_TLB_W		0x00000800      /* Caching is write-through */
-#define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
-#define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
-#define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
-#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
-
-#define PPC44x_TLB_PERM_MASK	0x0000003f
-#define PPC44x_TLB_UX		0x00000020      /* User execution */
-#define PPC44x_TLB_UW		0x00000010      /* User write */
-#define PPC44x_TLB_UR		0x00000008      /* User read */
-#define PPC44x_TLB_SX		0x00000004      /* Super execution */
-#define PPC44x_TLB_SW		0x00000002      /* Super write */
-#define PPC44x_TLB_SR		0x00000001      /* Super read */
-
-/* Number of TLB entries */
-#define PPC44x_TLB_SIZE		64
-
-#ifndef __ASSEMBLY__
-
-extern unsigned int tlb_44x_hwater;
-
-typedef struct {
-	unsigned long id;
-	unsigned long vdso_base;
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#ifndef CONFIG_PPC_EARLY_DEBUG_44x
-#define PPC44x_EARLY_TLBS	1
-#else
-#define PPC44x_EARLY_TLBS	2
-#define PPC44x_EARLY_DEBUG_VIRTADDR	(ASM_CONST(0xf0000000) \
-	| (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff))
-#endif
-
-/* Size of the TLBs used for pinning in lowmem */
-#define PPC_PIN_SIZE	(1 << 28)	/* 256M */
-
-#endif /* _ASM_POWERPC_MMU_44X_H_ */
diff --git a/include/asm-powerpc/mmu-8xx.h b/include/asm-powerpc/mmu-8xx.h
deleted file mode 100644
index 9db877eb88db..000000000000
--- a/include/asm-powerpc/mmu-8xx.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_8XX_H_
-#define _ASM_POWERPC_MMU_8XX_H_
-/*
- * PPC8xx support
- */
-
-/* Control/status registers for the MPC8xx.
- * A write operation to these registers causes serialized access.
- * During software tablewalk, the registers used perform mask/shift-add
- * operations when written/read.  A TLB entry is created when the Mx_RPN
- * is written, and the contents of several registers are used to
- * create the entry.
- */
-#define SPRN_MI_CTR	784	/* Instruction TLB control register */
-#define MI_GPM		0x80000000	/* Set domain manager mode */
-#define MI_PPM		0x40000000	/* Set subpage protection */
-#define MI_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
-#define MI_RSV4I	0x08000000	/* Reserve 4 TLB entries */
-#define MI_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
-#define MI_IDXMASK	0x00001f00	/* TLB index to be loaded */
-#define MI_RESETVAL	0x00000000	/* Value of register at reset */
-
-/* These are the Ks and Kp from the PowerPC books.  For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MI_AP	786
-#define MI_Ks		0x80000000	/* Should not be set */
-#define MI_Kp		0x40000000	/* Should always be set */
-
-/* The effective page number register.  When read, contains the information
- * about the last instruction TLB miss.  When MI_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MI_EPN	787
-#define MI_EPNMASK	0xfffff000	/* Effective page number for entry */
-#define MI_EVALID	0x00000200	/* Entry is valid */
-#define MI_ASIDMASK	0x0000000f	/* ASID match value */
-					/* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the instruction TLB, it contains bits that get loaded into the
- * TLB entry when the MI_RPN is written.
- */
-#define SPRN_MI_TWC	789
-#define MI_APG		0x000001e0	/* Access protection group (0) */
-#define MI_GUARDED	0x00000010	/* Guarded storage */
-#define MI_PSMASK	0x0000000c	/* Mask of page size bits */
-#define MI_PS8MEG	0x0000000c	/* 8M page size */
-#define MI_PS512K	0x00000004	/* 512K page size */
-#define MI_PS4K_16K	0x00000000	/* 4K or 16K page size */
-#define MI_SVALID	0x00000001	/* Segment entry is valid */
-					/* Reset value is undefined */
-
-/* Real page number.  Defined by the pte.  Writing this register
- * causes a TLB entry to be created for the instruction TLB, using
- * additional information from the MI_EPN, and MI_TWC registers.
- */
-#define SPRN_MI_RPN	790
-
-/* Define an RPN value for mapping kernel memory to large virtual
- * pages for boot initialization.  This has real page number of 0,
- * large page size, shared page, cache enabled, and valid.
- * Also mark all subpages valid and write access.
- */
-#define MI_BOOTINIT	0x000001fd
-
-#define SPRN_MD_CTR	792	/* Data TLB control register */
-#define MD_GPM		0x80000000	/* Set domain manager mode */
-#define MD_PPM		0x40000000	/* Set subpage protection */
-#define MD_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
-#define MD_WTDEF	0x10000000	/* Set writethrough when MMU dis */
-#define MD_RSV4I	0x08000000	/* Reserve 4 TLB entries */
-#define MD_TWAM		0x04000000	/* Use 4K page hardware assist */
-#define MD_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
-#define MD_IDXMASK	0x00001f00	/* TLB index to be loaded */
-#define MD_RESETVAL	0x04000000	/* Value of register at reset */
-
-#define SPRN_M_CASID	793	/* Address space ID (context) to match */
-#define MC_ASIDMASK	0x0000000f	/* Bits used for ASID value */
-
-
-/* These are the Ks and Kp from the PowerPC books.  For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MD_AP	794
-#define MD_Ks		0x80000000	/* Should not be set */
-#define MD_Kp		0x40000000	/* Should always be set */
-
-/* The effective page number register.  When read, contains the information
- * about the last instruction TLB miss.  When MD_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MD_EPN	795
-#define MD_EPNMASK	0xfffff000	/* Effective page number for entry */
-#define MD_EVALID	0x00000200	/* Entry is valid */
-#define MD_ASIDMASK	0x0000000f	/* ASID match value */
-					/* Reset value is undefined */
-
-/* The pointer to the base address of the first level page table.
- * During a software tablewalk, reading this register provides the address
- * of the entry associated with MD_EPN.
- */
-#define SPRN_M_TWB	796
-#define	M_L1TB		0xfffff000	/* Level 1 table base address */
-#define M_L1INDX	0x00000ffc	/* Level 1 index, when read */
-					/* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the data TLB, it contains bits that get loaded into the TLB entry
- * when the MD_RPN is written.  It is also provides the hardware assist
- * for finding the PTE address during software tablewalk.
- */
-#define SPRN_MD_TWC	797
-#define MD_L2TB		0xfffff000	/* Level 2 table base address */
-#define MD_L2INDX	0xfffffe00	/* Level 2 index (*pte), when read */
-#define MD_APG		0x000001e0	/* Access protection group (0) */
-#define MD_GUARDED	0x00000010	/* Guarded storage */
-#define MD_PSMASK	0x0000000c	/* Mask of page size bits */
-#define MD_PS8MEG	0x0000000c	/* 8M page size */
-#define MD_PS512K	0x00000004	/* 512K page size */
-#define MD_PS4K_16K	0x00000000	/* 4K or 16K page size */
-#define MD_WT		0x00000002	/* Use writethrough page attribute */
-#define MD_SVALID	0x00000001	/* Segment entry is valid */
-					/* Reset value is undefined */
-
-
-/* Real page number.  Defined by the pte.  Writing this register
- * causes a TLB entry to be created for the data TLB, using
- * additional information from the MD_EPN, and MD_TWC registers.
- */
-#define SPRN_MD_RPN	798
-
-/* This is a temporary storage register that could be used to save
- * a processor working register during a tablewalk.
- */
-#define SPRN_M_TW	799
-
-#ifndef __ASSEMBLY__
-typedef struct {
-	unsigned long id;
-	unsigned long vdso_base;
-} mm_context_t;
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/include/asm-powerpc/mmu-fsl-booke.h
deleted file mode 100644
index 925d93cf64d8..000000000000
--- a/include/asm-powerpc/mmu-fsl-booke.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_
-#define _ASM_POWERPC_MMU_FSL_BOOKE_H_
-/*
- * Freescale Book-E MMU support
- */
-
-/* Book-E defined page sizes */
-#define BOOKE_PAGESZ_1K		0
-#define BOOKE_PAGESZ_4K		1
-#define BOOKE_PAGESZ_16K	2
-#define BOOKE_PAGESZ_64K	3
-#define BOOKE_PAGESZ_256K	4
-#define BOOKE_PAGESZ_1M		5
-#define BOOKE_PAGESZ_4M		6
-#define BOOKE_PAGESZ_16M	7
-#define BOOKE_PAGESZ_64M	8
-#define BOOKE_PAGESZ_256M	9
-#define BOOKE_PAGESZ_1GB	10
-#define BOOKE_PAGESZ_4GB	11
-#define BOOKE_PAGESZ_16GB	12
-#define BOOKE_PAGESZ_64GB	13
-#define BOOKE_PAGESZ_256GB	14
-#define BOOKE_PAGESZ_1TB	15
-
-#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
-#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x)	((x) & 0x00000FFF)
-
-#define MAS1_VALID 	0x80000000
-#define MAS1_IPROT	0x40000000
-#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
-#define MAS1_TS		0x00001000
-#define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
-
-#define MAS2_EPN	0xFFFFF000
-#define MAS2_X0		0x00000040
-#define MAS2_X1		0x00000020
-#define MAS2_W		0x00000010
-#define MAS2_I		0x00000008
-#define MAS2_M		0x00000004
-#define MAS2_G		0x00000002
-#define MAS2_E		0x00000001
-
-#define MAS3_RPN	0xFFFFF000
-#define MAS3_U0		0x00000200
-#define MAS3_U1		0x00000100
-#define MAS3_U2		0x00000080
-#define MAS3_U3		0x00000040
-#define MAS3_UX		0x00000020
-#define MAS3_SX		0x00000010
-#define MAS3_UW		0x00000008
-#define MAS3_SW		0x00000004
-#define MAS3_UR		0x00000002
-#define MAS3_SR		0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_TIDDSEL	0x000F0000
-#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
-#define MAS4_X0D	0x00000040
-#define MAS4_X1D	0x00000020
-#define MAS4_WD		0x00000010
-#define MAS4_ID		0x00000008
-#define MAS4_MD		0x00000004
-#define MAS4_GD		0x00000002
-#define MAS4_ED		0x00000001
-
-#define MAS6_SPID0	0x3FFF0000
-#define MAS6_SPID1	0x00007FFE
-#define MAS6_SAS	0x00000001
-#define MAS6_SPID	MAS6_SPID0
-
-#define MAS7_RPN	0xFFFFFFFF
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long id;
-	unsigned long vdso_base;
-} mm_context_t;
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */
diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h
deleted file mode 100644
index 16b1a1e77e64..000000000000
--- a/include/asm-powerpc/mmu-hash32.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_HASH32_H_
-#define _ASM_POWERPC_MMU_HASH32_H_
-/*
- * 32-bit hash table MMU support
- */
-
-/*
- * BATs
- */
-
-/* Block size masks */
-#define BL_128K	0x000
-#define BL_256K 0x001
-#define BL_512K 0x003
-#define BL_1M   0x007
-#define BL_2M   0x00F
-#define BL_4M   0x01F
-#define BL_8M   0x03F
-#define BL_16M  0x07F
-#define BL_32M  0x0FF
-#define BL_64M  0x1FF
-#define BL_128M 0x3FF
-#define BL_256M 0x7FF
-
-/* BAT Access Protection */
-#define BPP_XX	0x00		/* No access */
-#define BPP_RX	0x01		/* Read only */
-#define BPP_RW	0x02		/* Read/write */
-
-#ifndef __ASSEMBLY__
-/* Contort a phys_addr_t into the right format/bits for a BAT */
-#ifdef CONFIG_PHYS_64BIT
-#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
-				((x & 0x0000000e00000000ULL) >> 24) | \
-				((x & 0x0000000100000000ULL) >> 30)))
-#else
-#define BAT_PHYS_ADDR(x) (x)
-#endif
-
-struct ppc_bat {
-	u32 batu;
-	u32 batl;
-};
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Hash table
- */
-
-/* Values for PP (assumes Ks=0, Kp=1) */
-#define PP_RWXX	0	/* Supervisor read/write, User none */
-#define PP_RWRX 1	/* Supervisor read/write, User read */
-#define PP_RWRW 2	/* Supervisor read/write, User read/write */
-#define PP_RXRX 3	/* Supervisor read,       User read */
-
-#ifndef __ASSEMBLY__
-
-/* Hardware Page Table Entry */
-struct hash_pte {
-	unsigned long v:1;	/* Entry is valid */
-	unsigned long vsid:24;	/* Virtual segment identifier */
-	unsigned long h:1;	/* Hash algorithm indicator */
-	unsigned long api:6;	/* Abbreviated page index */
-	unsigned long rpn:20;	/* Real (physical) page number */
-	unsigned long    :3;	/* Unused */
-	unsigned long r:1;	/* Referenced */
-	unsigned long c:1;	/* Changed */
-	unsigned long w:1;	/* Write-thru cache mode */
-	unsigned long i:1;	/* Cache inhibited */
-	unsigned long m:1;	/* Memory coherence */
-	unsigned long g:1;	/* Guarded */
-	unsigned long  :1;	/* Unused */
-	unsigned long pp:2;	/* Page protection */
-};
-
-typedef struct {
-	unsigned long id;
-	unsigned long vdso_base;
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
deleted file mode 100644
index d1dc16afb118..000000000000
--- a/include/asm-powerpc/mmu-hash64.h
+++ /dev/null
@@ -1,476 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_HASH64_H_
-#define _ASM_POWERPC_MMU_HASH64_H_
-/*
- * PowerPC64 memory management structures
- *
- * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com>
- *   PPC64 rework.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm-compat.h>
-#include <asm/page.h>
-
-/*
- * Segment table
- */
-
-#define STE_ESID_V	0x80
-#define STE_ESID_KS	0x20
-#define STE_ESID_KP	0x10
-#define STE_ESID_N	0x08
-
-#define STE_VSID_SHIFT	12
-
-/* Location of cpu0's segment table */
-#define STAB0_PAGE	0x6
-#define STAB0_OFFSET	(STAB0_PAGE << 12)
-#define STAB0_PHYS_ADDR	(STAB0_OFFSET + PHYSICAL_START)
-
-#ifndef __ASSEMBLY__
-extern char initial_stab[];
-#endif /* ! __ASSEMBLY */
-
-/*
- * SLB
- */
-
-#define SLB_NUM_BOLTED		3
-#define SLB_CACHE_ENTRIES	8
-
-/* Bits in the SLB ESID word */
-#define SLB_ESID_V		ASM_CONST(0x0000000008000000) /* valid */
-
-/* Bits in the SLB VSID word */
-#define SLB_VSID_SHIFT		12
-#define SLB_VSID_SHIFT_1T	24
-#define SLB_VSID_SSIZE_SHIFT	62
-#define SLB_VSID_B		ASM_CONST(0xc000000000000000)
-#define SLB_VSID_B_256M		ASM_CONST(0x0000000000000000)
-#define SLB_VSID_B_1T		ASM_CONST(0x4000000000000000)
-#define SLB_VSID_KS		ASM_CONST(0x0000000000000800)
-#define SLB_VSID_KP		ASM_CONST(0x0000000000000400)
-#define SLB_VSID_N		ASM_CONST(0x0000000000000200) /* no-execute */
-#define SLB_VSID_L		ASM_CONST(0x0000000000000100)
-#define SLB_VSID_C		ASM_CONST(0x0000000000000080) /* class */
-#define SLB_VSID_LP		ASM_CONST(0x0000000000000030)
-#define SLB_VSID_LP_00		ASM_CONST(0x0000000000000000)
-#define SLB_VSID_LP_01		ASM_CONST(0x0000000000000010)
-#define SLB_VSID_LP_10		ASM_CONST(0x0000000000000020)
-#define SLB_VSID_LP_11		ASM_CONST(0x0000000000000030)
-#define SLB_VSID_LLP		(SLB_VSID_L|SLB_VSID_LP)
-
-#define SLB_VSID_KERNEL		(SLB_VSID_KP)
-#define SLB_VSID_USER		(SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C)
-
-#define SLBIE_C			(0x08000000)
-#define SLBIE_SSIZE_SHIFT	25
-
-/*
- * Hash table
- */
-
-#define HPTES_PER_GROUP 8
-
-#define HPTE_V_SSIZE_SHIFT	62
-#define HPTE_V_AVPN_SHIFT	7
-#define HPTE_V_AVPN		ASM_CONST(0x3fffffffffffff80)
-#define HPTE_V_AVPN_VAL(x)	(((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
-#define HPTE_V_COMPARE(x,y)	(!(((x) ^ (y)) & 0xffffffffffffff80UL))
-#define HPTE_V_BOLTED		ASM_CONST(0x0000000000000010)
-#define HPTE_V_LOCK		ASM_CONST(0x0000000000000008)
-#define HPTE_V_LARGE		ASM_CONST(0x0000000000000004)
-#define HPTE_V_SECONDARY	ASM_CONST(0x0000000000000002)
-#define HPTE_V_VALID		ASM_CONST(0x0000000000000001)
-
-#define HPTE_R_PP0		ASM_CONST(0x8000000000000000)
-#define HPTE_R_TS		ASM_CONST(0x4000000000000000)
-#define HPTE_R_RPN_SHIFT	12
-#define HPTE_R_RPN		ASM_CONST(0x3ffffffffffff000)
-#define HPTE_R_FLAGS		ASM_CONST(0x00000000000003ff)
-#define HPTE_R_PP		ASM_CONST(0x0000000000000003)
-#define HPTE_R_N		ASM_CONST(0x0000000000000004)
-#define HPTE_R_C		ASM_CONST(0x0000000000000080)
-#define HPTE_R_R		ASM_CONST(0x0000000000000100)
-
-#define HPTE_V_1TB_SEG		ASM_CONST(0x4000000000000000)
-#define HPTE_V_VRMA_MASK	ASM_CONST(0x4001ffffff000000)
-
-/* Values for PP (assumes Ks=0, Kp=1) */
-/* pp0 will always be 0 for linux     */
-#define PP_RWXX	0	/* Supervisor read/write, User none */
-#define PP_RWRX 1	/* Supervisor read/write, User read */
-#define PP_RWRW 2	/* Supervisor read/write, User read/write */
-#define PP_RXRX 3	/* Supervisor read,       User read */
-
-#ifndef __ASSEMBLY__
-
-struct hash_pte {
-	unsigned long v;
-	unsigned long r;
-};
-
-extern struct hash_pte *htab_address;
-extern unsigned long htab_size_bytes;
-extern unsigned long htab_hash_mask;
-
-/*
- * Page size definition
- *
- *    shift : is the "PAGE_SHIFT" value for that page size
- *    sllp  : is a bit mask with the value of SLB L || LP to be or'ed
- *            directly to a slbmte "vsid" value
- *    penc  : is the HPTE encoding mask for the "LP" field:
- *
- */
-struct mmu_psize_def
-{
-	unsigned int	shift;	/* number of bits */
-	unsigned int	penc;	/* HPTE encoding */
-	unsigned int	tlbiel;	/* tlbiel supported for that page size */
-	unsigned long	avpnm;	/* bits to mask out in AVPN in the HPTE */
-	unsigned long	sllp;	/* SLB L||LP (exact mask to use in slbmte) */
-};
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The kernel use the constants below to index in the page sizes array.
- * The use of fixed constants for this purpose is better for performances
- * of the low level hash refill handlers.
- *
- * A non supported page size has a "shift" field set to 0
- *
- * Any new page size being implemented can get a new entry in here. Whether
- * the kernel will use it or not is a different matter though. The actual page
- * size used by hugetlbfs is not defined here and may be made variable
- */
-
-#define MMU_PAGE_4K		0	/* 4K */
-#define MMU_PAGE_64K		1	/* 64K */
-#define MMU_PAGE_64K_AP		2	/* 64K Admixed (in a 4K segment) */
-#define MMU_PAGE_1M		3	/* 1M */
-#define MMU_PAGE_16M		4	/* 16M */
-#define MMU_PAGE_16G		5	/* 16G */
-#define MMU_PAGE_COUNT		6
-
-/*
- * Segment sizes.
- * These are the values used by hardware in the B field of
- * SLB entries and the first dword of MMU hashtable entries.
- * The B field is 2 bits; the values 2 and 3 are unused and reserved.
- */
-#define MMU_SEGSIZE_256M	0
-#define MMU_SEGSIZE_1T		1
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * The current system page and segment sizes
- */
-extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
-extern int mmu_linear_psize;
-extern int mmu_virtual_psize;
-extern int mmu_vmalloc_psize;
-extern int mmu_vmemmap_psize;
-extern int mmu_io_psize;
-extern int mmu_kernel_ssize;
-extern int mmu_highuser_ssize;
-extern u16 mmu_slb_size;
-extern unsigned long tce_alloc_start, tce_alloc_end;
-
-/*
- * If the processor supports 64k normal pages but not 64k cache
- * inhibited pages, we have to be prepared to switch processes
- * to use 4k pages when they create cache-inhibited mappings.
- * If this is the case, mmu_ci_restrictions will be set to 1.
- */
-extern int mmu_ci_restrictions;
-
-#ifdef CONFIG_HUGETLB_PAGE
-/*
- * The page size index of the huge pages for use by hugetlbfs
- */
-extern int mmu_huge_psize;
-
-#endif /* CONFIG_HUGETLB_PAGE */
-
-/*
- * This function sets the AVPN and L fields of the HPTE  appropriately
- * for the page size
- */
-static inline unsigned long hpte_encode_v(unsigned long va, int psize,
-					  int ssize)
-{
-	unsigned long v;
-	v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
-	v <<= HPTE_V_AVPN_SHIFT;
-	if (psize != MMU_PAGE_4K)
-		v |= HPTE_V_LARGE;
-	v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
-	return v;
-}
-
-/*
- * This function sets the ARPN, and LP fields of the HPTE appropriately
- * for the page size. We assume the pa is already "clean" that is properly
- * aligned for the requested page size
- */
-static inline unsigned long hpte_encode_r(unsigned long pa, int psize)
-{
-	unsigned long r;
-
-	/* A 4K page needs no special encoding */
-	if (psize == MMU_PAGE_4K)
-		return pa & HPTE_R_RPN;
-	else {
-		unsigned int penc = mmu_psize_defs[psize].penc;
-		unsigned int shift = mmu_psize_defs[psize].shift;
-		return (pa & ~((1ul << shift) - 1)) | (penc << 12);
-	}
-	return r;
-}
-
-/*
- * Build a VA given VSID, EA and segment size
- */
-static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid,
-				   int ssize)
-{
-	if (ssize == MMU_SEGSIZE_256M)
-		return (vsid << 28) | (ea & 0xfffffffUL);
-	return (vsid << 40) | (ea & 0xffffffffffUL);
-}
-
-/*
- * This hashes a virtual address
- */
-
-static inline unsigned long hpt_hash(unsigned long va, unsigned int shift,
-				     int ssize)
-{
-	unsigned long hash, vsid;
-
-	if (ssize == MMU_SEGSIZE_256M) {
-		hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift);
-	} else {
-		vsid = va >> 40;
-		hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift);
-	}
-	return hash & 0x7fffffffffUL;
-}
-
-extern int __hash_page_4K(unsigned long ea, unsigned long access,
-			  unsigned long vsid, pte_t *ptep, unsigned long trap,
-			  unsigned int local, int ssize, int subpage_prot);
-extern int __hash_page_64K(unsigned long ea, unsigned long access,
-			   unsigned long vsid, pte_t *ptep, unsigned long trap,
-			   unsigned int local, int ssize);
-struct mm_struct;
-extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
-extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
-			  unsigned long ea, unsigned long vsid, int local,
-			  unsigned long trap);
-
-extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-			     unsigned long pstart, unsigned long mode,
-			     int psize, int ssize);
-extern void set_huge_psize(int psize);
-extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
-
-extern void htab_initialize(void);
-extern void htab_initialize_secondary(void);
-extern void hpte_init_native(void);
-extern void hpte_init_lpar(void);
-extern void hpte_init_iSeries(void);
-extern void hpte_init_beat(void);
-extern void hpte_init_beat_v3(void);
-
-extern void stabs_alloc(void);
-extern void slb_initialize(void);
-extern void slb_flush_and_rebolt(void);
-extern void stab_initialize(unsigned long stab);
-
-extern void slb_vmalloc_update(void);
-#endif /* __ASSEMBLY__ */
-
-/*
- * VSID allocation
- *
- * We first generate a 36-bit "proto-VSID".  For kernel addresses this
- * is equal to the ESID, for user addresses it is:
- *	(context << 15) | (esid & 0x7fff)
- *
- * The two forms are distinguishable because the top bit is 0 for user
- * addresses, whereas the top two bits are 1 for kernel addresses.
- * Proto-VSIDs with the top two bits equal to 0b10 are reserved for
- * now.
- *
- * The proto-VSIDs are then scrambled into real VSIDs with the
- * multiplicative hash:
- *
- *	VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS
- *	where	VSID_MULTIPLIER = 268435399 = 0xFFFFFC7
- *		VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF
- *
- * This scramble is only well defined for proto-VSIDs below
- * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are
- * reserved.  VSID_MULTIPLIER is prime, so in particular it is
- * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
- * Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- * 	- We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
- *
- * 	- We allow for 15 significant bits of ESID and 20 bits of
- * context for user addresses.  i.e. 8T (43 bits) of address space for
- * up to 1M contexts (although the page table structure and context
- * allocation will need changes to take advantage of this).
- *
- * 	- The scramble function gives robust scattering in the hash
- * table (at least based on some initial results).  The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
- */
-/*
- * WARNING - If you change these you must make sure the asm
- * implementations in slb_allocate (slb_low.S), do_stab_bolted
- * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly.
- *
- * You'll also need to change the precomputed VSID values in head.S
- * which are used by the iSeries firmware.
- */
-
-#define VSID_MULTIPLIER_256M	ASM_CONST(200730139)	/* 28-bit prime */
-#define VSID_BITS_256M		36
-#define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
-
-#define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_1T		24
-#define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
-
-#define CONTEXT_BITS		19
-#define USER_ESID_BITS		16
-#define USER_ESID_BITS_1T	4
-
-#define USER_VSID_RANGE	(1UL << (USER_ESID_BITS + SID_SHIFT))
-
-/*
- * This macro generates asm code to compute the VSID scramble
- * function.  Used in slb_allocate() and do_stab_bolted.  The function
- * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
- *
- *	rt = register continaing the proto-VSID and into which the
- *		VSID will be stored
- *	rx = scratch register (clobbered)
- *
- * 	- rt and rx must be different registers
- * 	- The answer will end up in the low VSID_BITS bits of rt.  The higher
- * 	  bits may contain other garbage, so you may need to mask the
- * 	  result.
- */
-#define ASM_VSID_SCRAMBLE(rt, rx, size)					\
-	lis	rx,VSID_MULTIPLIER_##size@h;				\
-	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
-	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
-									\
-	srdi	rx,rt,VSID_BITS_##size;					\
-	clrldi	rt,rt,(64-VSID_BITS_##size);				\
-	add	rt,rt,rx;		/* add high and low bits */	\
-	/* Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
-	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
-	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
-	 * the bit clear, r3 already has the answer we want, if it	\
-	 * doesn't, the answer is the low 36 bits of r3+1.  So in all	\
-	 * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
-	addi	rx,rt,1;						\
-	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
-	add	rt,rt,rx
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_context_id_t;
-
-typedef struct {
-	mm_context_id_t id;
-	u16 user_psize;		/* page size index */
-
-#ifdef CONFIG_PPC_MM_SLICES
-	u64 low_slices_psize;	/* SLB page size encodings */
-	u64 high_slices_psize;  /* 4 bits per slice for now */
-#else
-	u16 sllp;		/* SLB page size encoding */
-#endif
-	unsigned long vdso_base;
-} mm_context_t;
-
-
-#if 0
-/*
- * The code below is equivalent to this function for arguments
- * < 2^VSID_BITS, which is all this should ever be called
- * with.  However gcc is not clever enough to compute the
- * modulus (2^n-1) without a second multiply.
- */
-#define vsid_scrample(protovsid, size) \
-	((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size))
-
-#else /* 1 */
-#define vsid_scramble(protovsid, size) \
-	({								 \
-		unsigned long x;					 \
-		x = (protovsid) * VSID_MULTIPLIER_##size;		 \
-		x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \
-		(x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \
-	})
-#endif /* 1 */
-
-/* This is only valid for addresses >= KERNELBASE */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
-	if (ssize == MMU_SEGSIZE_256M)
-		return vsid_scramble(ea >> SID_SHIFT, 256M);
-	return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
-}
-
-/* Returns the segment size indicator for a user address */
-static inline int user_segment_size(unsigned long addr)
-{
-	/* Use 1T segments if possible for addresses >= 1T */
-	if (addr >= (1UL << SID_SHIFT_1T))
-		return mmu_highuser_ssize;
-	return MMU_SEGSIZE_256M;
-}
-
-/* This is only valid for user addresses (which are below 2^44) */
-static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
-				     int ssize)
-{
-	if (ssize == MMU_SEGSIZE_256M)
-		return vsid_scramble((context << USER_ESID_BITS)
-				     | (ea >> SID_SHIFT), 256M);
-	return vsid_scramble((context << USER_ESID_BITS_1T)
-			     | (ea >> SID_SHIFT_1T), 1T);
-}
-
-/*
- * This is only used on legacy iSeries in lparmap.c,
- * hence the 256MB segment assumption.
- */
-#define VSID_SCRAMBLE(pvsid)	(((pvsid) * VSID_MULTIPLIER_256M) %	\
-				 VSID_MODULUS_256M)
-#define KERNEL_VSID(ea)		VSID_SCRAMBLE(GET_ESID(ea))
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h
deleted file mode 100644
index 4c0e1b4f975c..000000000000
--- a/include/asm-powerpc/mmu.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _ASM_POWERPC_MMU_H_
-#define _ASM_POWERPC_MMU_H_
-#ifdef __KERNEL__
-
-#ifdef CONFIG_PPC64
-/* 64-bit classic hash table MMU */
-#  include <asm/mmu-hash64.h>
-#elif defined(CONFIG_PPC_STD_MMU)
-/* 32-bit classic hash table MMU */
-#  include <asm/mmu-hash32.h>
-#elif defined(CONFIG_40x)
-/* 40x-style software loaded TLB */
-#  include <asm/mmu-40x.h>
-#elif defined(CONFIG_44x)
-/* 44x-style software loaded TLB */
-#  include <asm/mmu-44x.h>
-#elif defined(CONFIG_FSL_BOOKE)
-/* Freescale Book-E software loaded TLB */
-#  include <asm/mmu-fsl-booke.h>
-#elif defined (CONFIG_PPC_8xx)
-/* Motorola/Freescale 8xx software loaded TLB */
-#  include <asm/mmu-8xx.h>
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h
deleted file mode 100644
index 9102b8bf0ead..000000000000
--- a/include/asm-powerpc/mmu_context.h
+++ /dev/null
@@ -1,280 +0,0 @@
-#ifndef __ASM_POWERPC_MMU_CONTEXT_H
-#define __ASM_POWERPC_MMU_CONTEXT_H
-#ifdef __KERNEL__
-
-#include <asm/mmu.h>	
-#include <asm/cputable.h>
-#include <asm-generic/mm_hooks.h>
-
-#ifndef CONFIG_PPC64
-#include <asm/atomic.h>
-#include <linux/bitops.h>
-
-/*
- * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
- * (virtual segment identifiers) for each context.  Although the
- * hardware supports 24-bit VSIDs, and thus >1 million contexts,
- * we only use 32,768 of them.  That is ample, since there can be
- * at most around 30,000 tasks in the system anyway, and it means
- * that we can use a bitmap to indicate which contexts are in use.
- * Using a bitmap means that we entirely avoid all of the problems
- * that we used to have when the context number overflowed,
- * particularly on SMP systems.
- *  -- paulus.
- */
-
-/*
- * This function defines the mapping from contexts to VSIDs (virtual
- * segment IDs).  We use a skew on both the context and the high 4 bits
- * of the 32-bit virtual address (the "effective segment ID") in order
- * to spread out the entries in the MMU hash table.  Note, if this
- * function is changed then arch/ppc/mm/hashtable.S will have to be
- * changed to correspond.
- */
-#define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
-				 & 0xffffff)
-
-/*
-   The MPC8xx has only 16 contexts.  We rotate through them on each
-   task switch.  A better way would be to keep track of tasks that
-   own contexts, and implement an LRU usage.  That way very active
-   tasks don't always have to pay the TLB reload overhead.  The
-   kernel pages are mapped shared, so the kernel can run on behalf
-   of any task that makes a kernel entry.  Shared does not mean they
-   are not protected, just that the ASID comparison is not performed.
-        -- Dan
-
-   The IBM4xx has 256 contexts, so we can just rotate through these
-   as a way of "switching" contexts.  If the TID of the TLB is zero,
-   the PID/TID comparison is disabled, so we can use a TID of zero
-   to represent all kernel pages as shared among all contexts.
-   	-- Dan
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_8xx
-#define NO_CONTEXT      	16
-#define LAST_CONTEXT    	15
-#define FIRST_CONTEXT    	0
-
-#elif defined(CONFIG_4xx)
-#define NO_CONTEXT      	256
-#define LAST_CONTEXT    	255
-#define FIRST_CONTEXT    	1
-
-#elif defined(CONFIG_E200) || defined(CONFIG_E500)
-#define NO_CONTEXT      	256
-#define LAST_CONTEXT    	255
-#define FIRST_CONTEXT    	1
-
-#else
-
-/* PPC 6xx, 7xx CPUs */
-#define NO_CONTEXT      	((unsigned long) -1)
-#define LAST_CONTEXT    	32767
-#define FIRST_CONTEXT    	1
-#endif
-
-/*
- * Set the current MMU context.
- * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
- * loading up the segment registers for the user part of the address space.
- *
- * Since the PGD is immediately available, it is much faster to simply
- * pass this along as a second parameter, which is required for 8xx and
- * can be used for debugging on all processors (if you happen to have
- * an Abatron).
- */
-extern void set_context(unsigned long contextid, pgd_t *pgd);
-
-/*
- * Bitmap of contexts in use.
- * The size of this bitmap is LAST_CONTEXT + 1 bits.
- */
-extern unsigned long context_map[];
-
-/*
- * This caches the next context number that we expect to be free.
- * Its use is an optimization only, we can't rely on this context
- * number to be free, but it usually will be.
- */
-extern unsigned long next_mmu_context;
-
-/*
- * If we don't have sufficient contexts to give one to every task
- * that could be in the system, we need to be able to steal contexts.
- * These variables support that.
- */
-#if LAST_CONTEXT < 30000
-#define FEW_CONTEXTS	1
-extern atomic_t nr_free_contexts;
-extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern void steal_context(void);
-#endif
-
-/*
- * Get a new mmu context for the address space described by `mm'.
- */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
-	unsigned long ctx;
-
-	if (mm->context.id != NO_CONTEXT)
-		return;
-#ifdef FEW_CONTEXTS
-	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
-		steal_context();
-#endif
-	ctx = next_mmu_context;
-	while (test_and_set_bit(ctx, context_map)) {
-		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
-		if (ctx > LAST_CONTEXT)
-			ctx = 0;
-	}
-	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-	mm->context.id = ctx;
-#ifdef FEW_CONTEXTS
-	context_mm[ctx] = mm;
-#endif
-}
-
-/*
- * Set up the context for a new address space.
- */
-static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
-{
-	mm->context.id = NO_CONTEXT;
-	mm->context.vdso_base = 0;
-	return 0;
-}
-
-/*
- * We're finished using the context for an address space.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	preempt_disable();
-	if (mm->context.id != NO_CONTEXT) {
-		clear_bit(mm->context.id, context_map);
-		mm->context.id = NO_CONTEXT;
-#ifdef FEW_CONTEXTS
-		atomic_inc(&nr_free_contexts);
-#endif
-	}
-	preempt_enable();
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-#ifdef CONFIG_ALTIVEC
-	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-	asm volatile ("dssall;\n"
-#ifndef CONFIG_POWER4
-	 "sync;\n" /* G4 needs a sync here, G5 apparently not */
-#endif
-	 : : );
-#endif /* CONFIG_ALTIVEC */
-
-	tsk->thread.pgdir = next->pgd;
-
-	/* No need to flush userspace segments if the mm doesnt change */
-	if (prev == next)
-		return;
-
-	/* Setup new userspace context */
-	get_mmu_context(next);
-	set_context(next->context.id, next->pgd);
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
-
-extern void mmu_context_init(void);
-
-
-#else
-
-#include <linux/kernel.h>	
-#include <linux/mm.h>	
-#include <linux/sched.h>
-
-/*
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm,
-				  struct task_struct *tsk)
-{
-}
-
-/*
- * The proto-VSID space has 2^35 - 1 segments available for user mappings.
- * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
- * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
- */
-#define NO_CONTEXT	0
-#define MAX_CONTEXT	((1UL << 19) - 1)
-
-extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-extern void destroy_context(struct mm_struct *mm);
-
-extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
-extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
-
-/*
- * switch_mm is the entry point called from the architecture independent
- * code in kernel/sched.c
- */
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
-		cpu_set(smp_processor_id(), next->cpu_vm_mask);
-
-	/* No need to flush userspace segments if the mm doesnt change */
-	if (prev == next)
-		return;
-
-#ifdef CONFIG_ALTIVEC
-	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		asm volatile ("dssall");
-#endif /* CONFIG_ALTIVEC */
-
-	if (cpu_has_feature(CPU_FTR_SLB))
-		switch_slb(tsk, next);
-	else
-		switch_stab(tsk, next);
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	switch_mm(prev, next, current);
-	local_irq_restore(flags);
-}
-
-#endif /* CONFIG_PPC64 */
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/include/asm-powerpc/mmzone.h b/include/asm-powerpc/mmzone.h
deleted file mode 100644
index 19f299b7e256..000000000000
--- a/include/asm-powerpc/mmzone.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
- *
- * PowerPC64 port:
- * Copyright (C) 2002 Anton Blanchard, IBM Corp.
- */
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
-#ifdef __KERNEL__
-
-
-/*
- * generic non-linear memory support:
- *
- * 1) we will not split memory into more chunks than will fit into the
- *    flags field of the struct page
- */
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-
-extern struct pglist_data *node_data[];
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(node_data[nid])
-
-/*
- * Following are specific to this numa platform.
- */
-
-extern int numa_cpu_lookup_table[];
-extern cpumask_t numa_cpumask_lookup_table[];
-#ifdef CONFIG_MEMORY_HOTPLUG
-extern unsigned long max_pfn;
-#endif
-
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
-
-#endif /* CONFIG_NEED_MULTIPLE_NODES */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h
deleted file mode 100644
index e5f14b13ccf0..000000000000
--- a/include/asm-powerpc/module.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _ASM_POWERPC_MODULE_H
-#define _ASM_POWERPC_MODULE_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/list.h>
-#include <asm/bug.h>
-
-
-#ifndef __powerpc64__
-/*
- * Thanks to Paul M for explaining this.
- *
- * PPC can only do rel jumps += 32MB, and often the kernel and other
- * modules are furthur away than this.  So, we jump to a table of
- * trampolines attached to the module (the Procedure Linkage Table)
- * whenever that happens.
- */
-
-struct ppc_plt_entry {
-	/* 16 byte jump instruction sequence (4 instructions) */
-	unsigned int jump[4];
-};
-#endif	/* __powerpc64__ */
-
-
-struct mod_arch_specific {
-#ifdef __powerpc64__
-	unsigned int stubs_section;	/* Index of stubs section in module */
-	unsigned int toc_section;	/* What section is the TOC? */
-#else
-	/* Indices of PLT sections within module. */
-	unsigned int core_plt_section;
-	unsigned int init_plt_section;
-#endif
-
-	/* List of BUG addresses, source line numbers and filenames */
-	struct list_head bug_list;
-	struct bug_entry *bug_table;
-	unsigned int num_bugs;
-};
-
-/*
- * Select ELF headers.
- * Make empty section for module_frob_arch_sections to expand.
- */
-
-#ifdef __powerpc64__
-#    define Elf_Shdr	Elf64_Shdr
-#    define Elf_Sym	Elf64_Sym
-#    define Elf_Ehdr	Elf64_Ehdr
-#    ifdef MODULE
-	asm(".section .stubs,\"ax\",@nobits; .align 3; .previous");
-#    endif
-#else
-#    define Elf_Shdr	Elf32_Shdr
-#    define Elf_Sym	Elf32_Sym
-#    define Elf_Ehdr	Elf32_Ehdr
-#    ifdef MODULE
-	asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
-	asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
-#    endif	/* MODULE */
-#endif
-
-
-struct exception_table_entry;
-void sort_ex_table(struct exception_table_entry *start,
-		   struct exception_table_entry *finish);
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_MODULE_H */
diff --git a/include/asm-powerpc/mpc512x.h b/include/asm-powerpc/mpc512x.h
deleted file mode 100644
index c48a1658eeac..000000000000
--- a/include/asm-powerpc/mpc512x.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
- *
- * Description:
- * MPC5121 Prototypes and definitions
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_POWERPC_MPC512x_H__
-#define __ASM_POWERPC_MPC512x_H__
-
-extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
-
-#endif /* __ASM_POWERPC_MPC512x_H__ */
-
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
deleted file mode 100644
index 81ef10b6b672..000000000000
--- a/include/asm-powerpc/mpc52xx.h
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
- * May need to be cleaned as the port goes on ...
- *
- * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_POWERPC_MPC52xx_H__
-#define __ASM_POWERPC_MPC52xx_H__
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-#include <asm/prom.h>
-#endif /* __ASSEMBLY__ */
-
-#include <linux/suspend.h>
-
-/* Variants of the 5200(B) */
-#define MPC5200_SVR		0x80110010
-#define MPC5200_SVR_MASK	0xfffffff0
-#define MPC5200B_SVR		0x80110020
-#define MPC5200B_SVR_MASK	0xfffffff0
-
-/* ======================================================================== */
-/* Structures mapping of some unit register set                             */
-/* ======================================================================== */
-
-#ifndef __ASSEMBLY__
-
-/* Memory Mapping Control */
-struct mpc52xx_mmap_ctl {
-	u32 mbar;		/* MMAP_CTRL + 0x00 */
-
-	u32 cs0_start;		/* MMAP_CTRL + 0x04 */
-	u32 cs0_stop;		/* MMAP_CTRL + 0x08 */
-	u32 cs1_start;		/* MMAP_CTRL + 0x0c */
-	u32 cs1_stop;		/* MMAP_CTRL + 0x10 */
-	u32 cs2_start;		/* MMAP_CTRL + 0x14 */
-	u32 cs2_stop;		/* MMAP_CTRL + 0x18 */
-	u32 cs3_start;		/* MMAP_CTRL + 0x1c */
-	u32 cs3_stop;		/* MMAP_CTRL + 0x20 */
-	u32 cs4_start;		/* MMAP_CTRL + 0x24 */
-	u32 cs4_stop;		/* MMAP_CTRL + 0x28 */
-	u32 cs5_start;		/* MMAP_CTRL + 0x2c */
-	u32 cs5_stop;		/* MMAP_CTRL + 0x30 */
-
-	u32 sdram0;		/* MMAP_CTRL + 0x34 */
-	u32 sdram1;		/* MMAP_CTRL + 0X38 */
-
-	u32 reserved[4];	/* MMAP_CTRL + 0x3c .. 0x48 */
-
-	u32 boot_start;		/* MMAP_CTRL + 0x4c */
-	u32 boot_stop;		/* MMAP_CTRL + 0x50 */
-
-	u32 ipbi_ws_ctrl;	/* MMAP_CTRL + 0x54 */
-
-	u32 cs6_start;		/* MMAP_CTRL + 0x58 */
-	u32 cs6_stop;		/* MMAP_CTRL + 0x5c */
-	u32 cs7_start;		/* MMAP_CTRL + 0x60 */
-	u32 cs7_stop;		/* MMAP_CTRL + 0x64 */
-};
-
-/* SDRAM control */
-struct mpc52xx_sdram {
-	u32 mode;		/* SDRAM + 0x00 */
-	u32 ctrl;		/* SDRAM + 0x04 */
-	u32 config1;		/* SDRAM + 0x08 */
-	u32 config2;		/* SDRAM + 0x0c */
-};
-
-/* SDMA */
-struct mpc52xx_sdma {
-	u32 taskBar;		/* SDMA + 0x00 */
-	u32 currentPointer;	/* SDMA + 0x04 */
-	u32 endPointer;		/* SDMA + 0x08 */
-	u32 variablePointer;	/* SDMA + 0x0c */
-
-	u8 IntVect1;		/* SDMA + 0x10 */
-	u8 IntVect2;		/* SDMA + 0x11 */
-	u16 PtdCntrl;		/* SDMA + 0x12 */
-
-	u32 IntPend;		/* SDMA + 0x14 */
-	u32 IntMask;		/* SDMA + 0x18 */
-
-	u16 tcr[16];		/* SDMA + 0x1c .. 0x3a */
-
-	u8 ipr[32];		/* SDMA + 0x3c .. 0x5b */
-
-	u32 cReqSelect;		/* SDMA + 0x5c */
-	u32 task_size0;		/* SDMA + 0x60 */
-	u32 task_size1;		/* SDMA + 0x64 */
-	u32 MDEDebug;		/* SDMA + 0x68 */
-	u32 ADSDebug;		/* SDMA + 0x6c */
-	u32 Value1;		/* SDMA + 0x70 */
-	u32 Value2;		/* SDMA + 0x74 */
-	u32 Control;		/* SDMA + 0x78 */
-	u32 Status;		/* SDMA + 0x7c */
-	u32 PTDDebug;		/* SDMA + 0x80 */
-};
-
-/* GPT */
-struct mpc52xx_gpt {
-	u32 mode;		/* GPTx + 0x00 */
-	u32 count;		/* GPTx + 0x04 */
-	u32 pwm;		/* GPTx + 0x08 */
-	u32 status;		/* GPTx + 0X0c */
-};
-
-/* GPIO */
-struct mpc52xx_gpio {
-	u32 port_config;	/* GPIO + 0x00 */
-	u32 simple_gpioe;	/* GPIO + 0x04 */
-	u32 simple_ode;		/* GPIO + 0x08 */
-	u32 simple_ddr;		/* GPIO + 0x0c */
-	u32 simple_dvo;		/* GPIO + 0x10 */
-	u32 simple_ival;	/* GPIO + 0x14 */
-	u8 outo_gpioe;		/* GPIO + 0x18 */
-	u8 reserved1[3];	/* GPIO + 0x19 */
-	u8 outo_dvo;		/* GPIO + 0x1c */
-	u8 reserved2[3];	/* GPIO + 0x1d */
-	u8 sint_gpioe;		/* GPIO + 0x20 */
-	u8 reserved3[3];	/* GPIO + 0x21 */
-	u8 sint_ode;		/* GPIO + 0x24 */
-	u8 reserved4[3];	/* GPIO + 0x25 */
-	u8 sint_ddr;		/* GPIO + 0x28 */
-	u8 reserved5[3];	/* GPIO + 0x29 */
-	u8 sint_dvo;		/* GPIO + 0x2c */
-	u8 reserved6[3];	/* GPIO + 0x2d */
-	u8 sint_inten;		/* GPIO + 0x30 */
-	u8 reserved7[3];	/* GPIO + 0x31 */
-	u16 sint_itype;		/* GPIO + 0x34 */
-	u16 reserved8;		/* GPIO + 0x36 */
-	u8 gpio_control;	/* GPIO + 0x38 */
-	u8 reserved9[3];	/* GPIO + 0x39 */
-	u8 sint_istat;		/* GPIO + 0x3c */
-	u8 sint_ival;		/* GPIO + 0x3d */
-	u8 bus_errs;		/* GPIO + 0x3e */
-	u8 reserved10;		/* GPIO + 0x3f */
-};
-
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD	4
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD	5
-#define MPC52xx_GPIO_PCI_DIS			(1<<15)
-
-/* GPIO with WakeUp*/
-struct mpc52xx_gpio_wkup {
-	u8 wkup_gpioe;		/* GPIO_WKUP + 0x00 */
-	u8 reserved1[3];	/* GPIO_WKUP + 0x03 */
-	u8 wkup_ode;		/* GPIO_WKUP + 0x04 */
-	u8 reserved2[3];	/* GPIO_WKUP + 0x05 */
-	u8 wkup_ddr;		/* GPIO_WKUP + 0x08 */
-	u8 reserved3[3];	/* GPIO_WKUP + 0x09 */
-	u8 wkup_dvo;		/* GPIO_WKUP + 0x0C */
-	u8 reserved4[3];	/* GPIO_WKUP + 0x0D */
-	u8 wkup_inten;		/* GPIO_WKUP + 0x10 */
-	u8 reserved5[3];	/* GPIO_WKUP + 0x11 */
-	u8 wkup_iinten;		/* GPIO_WKUP + 0x14 */
-	u8 reserved6[3];	/* GPIO_WKUP + 0x15 */
-	u16 wkup_itype;		/* GPIO_WKUP + 0x18 */
-	u8 reserved7[2];	/* GPIO_WKUP + 0x1A */
-	u8 wkup_maste;		/* GPIO_WKUP + 0x1C */
-	u8 reserved8[3];	/* GPIO_WKUP + 0x1D */
-	u8 wkup_ival;		/* GPIO_WKUP + 0x20 */
-	u8 reserved9[3];	/* GPIO_WKUP + 0x21 */
-	u8 wkup_istat;		/* GPIO_WKUP + 0x24 */
-	u8 reserved10[3];	/* GPIO_WKUP + 0x25 */
-};
-
-/* XLB Bus control */
-struct mpc52xx_xlb {
-	u8 reserved[0x40];
-	u32 config;		/* XLB + 0x40 */
-	u32 version;		/* XLB + 0x44 */
-	u32 status;		/* XLB + 0x48 */
-	u32 int_enable;		/* XLB + 0x4c */
-	u32 addr_capture;	/* XLB + 0x50 */
-	u32 bus_sig_capture;	/* XLB + 0x54 */
-	u32 addr_timeout;	/* XLB + 0x58 */
-	u32 data_timeout;	/* XLB + 0x5c */
-	u32 bus_act_timeout;	/* XLB + 0x60 */
-	u32 master_pri_enable;	/* XLB + 0x64 */
-	u32 master_priority;	/* XLB + 0x68 */
-	u32 base_address;	/* XLB + 0x6c */
-	u32 snoop_window;	/* XLB + 0x70 */
-};
-
-#define MPC52xx_XLB_CFG_PLDIS		(1 << 31)
-#define MPC52xx_XLB_CFG_SNOOP		(1 << 15)
-
-/* Clock Distribution control */
-struct mpc52xx_cdm {
-	u32 jtag_id;		/* CDM + 0x00  reg0 read only */
-	u32 rstcfg;		/* CDM + 0x04  reg1 read only */
-	u32 breadcrumb;		/* CDM + 0x08  reg2 */
-
-	u8 mem_clk_sel;		/* CDM + 0x0c  reg3 byte0 */
-	u8 xlb_clk_sel;		/* CDM + 0x0d  reg3 byte1 read only */
-	u8 ipb_clk_sel;		/* CDM + 0x0e  reg3 byte2 */
-	u8 pci_clk_sel;		/* CDM + 0x0f  reg3 byte3 */
-
-	u8 ext_48mhz_en;	/* CDM + 0x10  reg4 byte0 */
-	u8 fd_enable;		/* CDM + 0x11  reg4 byte1 */
-	u16 fd_counters;	/* CDM + 0x12  reg4 byte2,3 */
-
-	u32 clk_enables;	/* CDM + 0x14  reg5 */
-
-	u8 osc_disable;		/* CDM + 0x18  reg6 byte0 */
-	u8 reserved0[3];	/* CDM + 0x19  reg6 byte1,2,3 */
-
-	u8 ccs_sleep_enable;	/* CDM + 0x1c  reg7 byte0 */
-	u8 osc_sleep_enable;	/* CDM + 0x1d  reg7 byte1 */
-	u8 reserved1;		/* CDM + 0x1e  reg7 byte2 */
-	u8 ccs_qreq_test;	/* CDM + 0x1f  reg7 byte3 */
-
-	u8 soft_reset;		/* CDM + 0x20  u8 byte0 */
-	u8 no_ckstp;		/* CDM + 0x21  u8 byte0 */
-	u8 reserved2[2];	/* CDM + 0x22  u8 byte1,2,3 */
-
-	u8 pll_lock;		/* CDM + 0x24  reg9 byte0 */
-	u8 pll_looselock;	/* CDM + 0x25  reg9 byte1 */
-	u8 pll_sm_lockwin;	/* CDM + 0x26  reg9 byte2 */
-	u8 reserved3;		/* CDM + 0x27  reg9 byte3 */
-
-	u16 reserved4;		/* CDM + 0x28  reg10 byte0,1 */
-	u16 mclken_div_psc1;	/* CDM + 0x2a  reg10 byte2,3 */
-
-	u16 reserved5;		/* CDM + 0x2c  reg11 byte0,1 */
-	u16 mclken_div_psc2;	/* CDM + 0x2e  reg11 byte2,3 */
-
-	u16 reserved6;		/* CDM + 0x30  reg12 byte0,1 */
-	u16 mclken_div_psc3;	/* CDM + 0x32  reg12 byte2,3 */
-
-	u16 reserved7;		/* CDM + 0x34  reg13 byte0,1 */
-	u16 mclken_div_psc6;	/* CDM + 0x36  reg13 byte2,3 */
-};
-
-#endif /* __ASSEMBLY__ */
-
-
-/* ========================================================================= */
-/* Prototypes for MPC52xx sysdev                                             */
-/* ========================================================================= */
-
-#ifndef __ASSEMBLY__
-
-/* mpc52xx_common.c */
-extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
-extern void mpc5200_setup_xlb_arbiter(void);
-extern void mpc52xx_declare_of_platform_devices(void);
-extern void mpc52xx_map_common_devices(void);
-extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
-extern void mpc52xx_restart(char *cmd);
-
-/* mpc52xx_pic.c */
-extern void mpc52xx_init_irq(void);
-extern unsigned int mpc52xx_get_irq(void);
-
-/* mpc52xx_pci.c */
-#ifdef CONFIG_PCI
-extern int __init mpc52xx_add_bridge(struct device_node *node);
-extern void __init mpc52xx_setup_pci(void);
-#else
-static inline void mpc52xx_setup_pci(void) { }
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PM
-struct mpc52xx_suspend {
-	void (*board_suspend_prepare)(void __iomem *mbar);
-	void (*board_resume_finish)(void __iomem *mbar);
-};
-
-extern struct mpc52xx_suspend mpc52xx_suspend;
-extern int __init mpc52xx_pm_init(void);
-extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
-
-#ifdef CONFIG_PPC_LITE5200
-extern int __init lite5200_pm_init(void);
-
-/* lite5200 calls mpc5200 suspend functions, so here they are */
-extern int mpc52xx_pm_prepare(void);
-extern int mpc52xx_pm_enter(suspend_state_t);
-extern void mpc52xx_pm_finish(void);
-extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
-#endif
-#endif /* CONFIG_PM */
-
-#endif /* __ASM_POWERPC_MPC52xx_H__ */
-
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
deleted file mode 100644
index 710c5d36efaa..000000000000
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * include/asm-ppc/mpc52xx_psc.h
- *
- * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
- * PSCs. Theses are shared between multiple drivers since a PSC can be
- * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based/Extracted from some header of the 2.4 originally written by
- * Dale Farnsworth <dfarnsworth@mvista.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_MPC52xx_PSC_H__
-#define __ASM_MPC52xx_PSC_H__
-
-#include <asm/types.h>
-
-/* Max number of PSCs */
-#define MPC52xx_PSC_MAXNUM	6
-
-/* Programmable Serial Controller (PSC) status register bits */
-#define MPC52xx_PSC_SR_CDE	0x0080
-#define MPC52xx_PSC_SR_RXRDY	0x0100
-#define MPC52xx_PSC_SR_RXFULL	0x0200
-#define MPC52xx_PSC_SR_TXRDY	0x0400
-#define MPC52xx_PSC_SR_TXEMP	0x0800
-#define MPC52xx_PSC_SR_OE	0x1000
-#define MPC52xx_PSC_SR_PE	0x2000
-#define MPC52xx_PSC_SR_FE	0x4000
-#define MPC52xx_PSC_SR_RB	0x8000
-
-/* PSC Command values */
-#define MPC52xx_PSC_RX_ENABLE		0x0001
-#define MPC52xx_PSC_RX_DISABLE		0x0002
-#define MPC52xx_PSC_TX_ENABLE		0x0004
-#define MPC52xx_PSC_TX_DISABLE		0x0008
-#define MPC52xx_PSC_SEL_MODE_REG_1	0x0010
-#define MPC52xx_PSC_RST_RX		0x0020
-#define MPC52xx_PSC_RST_TX		0x0030
-#define MPC52xx_PSC_RST_ERR_STAT	0x0040
-#define MPC52xx_PSC_RST_BRK_CHG_INT	0x0050
-#define MPC52xx_PSC_START_BRK		0x0060
-#define MPC52xx_PSC_STOP_BRK		0x0070
-
-/* PSC TxRx FIFO status bits */
-#define MPC52xx_PSC_RXTX_FIFO_ERR	0x0040
-#define MPC52xx_PSC_RXTX_FIFO_UF	0x0020
-#define MPC52xx_PSC_RXTX_FIFO_OF	0x0010
-#define MPC52xx_PSC_RXTX_FIFO_FR	0x0008
-#define MPC52xx_PSC_RXTX_FIFO_FULL	0x0004
-#define MPC52xx_PSC_RXTX_FIFO_ALARM	0x0002
-#define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
-
-/* PSC interrupt mask bits */
-#define MPC52xx_PSC_IMR_TXRDY		0x0100
-#define MPC52xx_PSC_IMR_RXRDY		0x0200
-#define MPC52xx_PSC_IMR_DB		0x0400
-#define MPC52xx_PSC_IMR_IPC		0x8000
-
-/* PSC input port change bit */
-#define MPC52xx_PSC_CTS			0x01
-#define MPC52xx_PSC_DCD			0x02
-#define MPC52xx_PSC_D_CTS		0x10
-#define MPC52xx_PSC_D_DCD		0x20
-
-/* PSC mode fields */
-#define MPC52xx_PSC_MODE_5_BITS			0x00
-#define MPC52xx_PSC_MODE_6_BITS			0x01
-#define MPC52xx_PSC_MODE_7_BITS			0x02
-#define MPC52xx_PSC_MODE_8_BITS			0x03
-#define MPC52xx_PSC_MODE_BITS_MASK		0x03
-#define MPC52xx_PSC_MODE_PAREVEN		0x00
-#define MPC52xx_PSC_MODE_PARODD			0x04
-#define MPC52xx_PSC_MODE_PARFORCE		0x08
-#define MPC52xx_PSC_MODE_PARNONE		0x10
-#define MPC52xx_PSC_MODE_ERR			0x20
-#define MPC52xx_PSC_MODE_FFULL			0x40
-#define MPC52xx_PSC_MODE_RXRTS			0x80
-
-#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS	0x00
-#define MPC52xx_PSC_MODE_ONE_STOP		0x07
-#define MPC52xx_PSC_MODE_TWO_STOP		0x0f
-
-#define MPC52xx_PSC_RFNUM_MASK	0x01ff
-
-
-/* Structure of the hardware registers */
-struct mpc52xx_psc {
-	u8		mode;		/* PSC + 0x00 */
-	u8		reserved0[3];
-	union {				/* PSC + 0x04 */
-		u16	status;
-		u16	clock_select;
-	} sr_csr;
-#define mpc52xx_psc_status	sr_csr.status
-#define mpc52xx_psc_clock_select sr_csr.clock_select
-	u16		reserved1;
-	u8		command;	/* PSC + 0x08 */
-	u8		reserved2[3];
-	union {				/* PSC + 0x0c */
-		u8	buffer_8;
-		u16	buffer_16;
-		u32	buffer_32;
-	} buffer;
-#define mpc52xx_psc_buffer_8	buffer.buffer_8
-#define mpc52xx_psc_buffer_16	buffer.buffer_16
-#define mpc52xx_psc_buffer_32	buffer.buffer_32
-	union {				/* PSC + 0x10 */
-		u8	ipcr;
-		u8	acr;
-	} ipcr_acr;
-#define mpc52xx_psc_ipcr	ipcr_acr.ipcr
-#define mpc52xx_psc_acr		ipcr_acr.acr
-	u8		reserved3[3];
-	union {				/* PSC + 0x14 */
-		u16	isr;
-		u16	imr;
-	} isr_imr;
-#define mpc52xx_psc_isr		isr_imr.isr
-#define mpc52xx_psc_imr		isr_imr.imr
-	u16		reserved4;
-	u8		ctur;		/* PSC + 0x18 */
-	u8		reserved5[3];
-	u8		ctlr;		/* PSC + 0x1c */
-	u8		reserved6[3];
-	u16		ccr;		/* PSC + 0x20 */
-	u8		reserved7[14];
-	u8		ivr;		/* PSC + 0x30 */
-	u8		reserved8[3];
-	u8		ip;		/* PSC + 0x34 */
-	u8		reserved9[3];
-	u8		op1;		/* PSC + 0x38 */
-	u8		reserved10[3];
-	u8		op0;		/* PSC + 0x3c */
-	u8		reserved11[3];
-	u32		sicr;		/* PSC + 0x40 */
-	u8		ircr1;		/* PSC + 0x44 */
-	u8		reserved13[3];
-	u8		ircr2;		/* PSC + 0x44 */
-	u8		reserved14[3];
-	u8		irsdr;		/* PSC + 0x4c */
-	u8		reserved15[3];
-	u8		irmdr;		/* PSC + 0x50 */
-	u8		reserved16[3];
-	u8		irfdr;		/* PSC + 0x54 */
-	u8		reserved17[3];
-};
-
-struct mpc52xx_psc_fifo {
-	u16		rfnum;		/* PSC + 0x58 */
-	u16		reserved18;
-	u16		tfnum;		/* PSC + 0x5c */
-	u16		reserved19;
-	u32		rfdata;		/* PSC + 0x60 */
-	u16		rfstat;		/* PSC + 0x64 */
-	u16		reserved20;
-	u8		rfcntl;		/* PSC + 0x68 */
-	u8		reserved21[5];
-	u16		rfalarm;	/* PSC + 0x6e */
-	u16		reserved22;
-	u16		rfrptr;		/* PSC + 0x72 */
-	u16		reserved23;
-	u16		rfwptr;		/* PSC + 0x76 */
-	u16		reserved24;
-	u16		rflrfptr;	/* PSC + 0x7a */
-	u16		reserved25;
-	u16		rflwfptr;	/* PSC + 0x7e */
-	u32		tfdata;		/* PSC + 0x80 */
-	u16		tfstat;		/* PSC + 0x84 */
-	u16		reserved26;
-	u8		tfcntl;		/* PSC + 0x88 */
-	u8		reserved27[5];
-	u16		tfalarm;	/* PSC + 0x8e */
-	u16		reserved28;
-	u16		tfrptr;		/* PSC + 0x92 */
-	u16		reserved29;
-	u16		tfwptr;		/* PSC + 0x96 */
-	u16		reserved30;
-	u16		tflrfptr;	/* PSC + 0x9a */
-	u16		reserved31;
-	u16		tflwfptr;	/* PSC + 0x9e */
-};
-
-#define MPC512x_PSC_FIFO_RESET_SLICE	0x80
-#define MPC512x_PSC_FIFO_ENABLE_SLICE	0x01
-#define MPC512x_PSC_FIFO_ENABLE_DMA	0x04
-
-#define MPC512x_PSC_FIFO_EMPTY		0x1
-#define MPC512x_PSC_FIFO_FULL		0x2
-#define MPC512x_PSC_FIFO_ALARM		0x4
-#define MPC512x_PSC_FIFO_URERR		0x8
-#define MPC512x_PSC_FIFO_ORERR		0x01
-#define MPC512x_PSC_FIFO_MEMERROR	0x02
-
-struct mpc512x_psc_fifo {
-	u32		reserved1[10];
-	u32		txcmd;		/* PSC + 0x80 */
-	u32		txalarm;	/* PSC + 0x84 */
-	u32		txsr;		/* PSC + 0x88 */
-	u32		txisr;		/* PSC + 0x8c */
-	u32		tximr;		/* PSC + 0x90 */
-	u32		txcnt;		/* PSC + 0x94 */
-	u32		txptr;		/* PSC + 0x98 */
-	u32		txsz;		/* PSC + 0x9c */
-	u32		reserved2[7];
-	union {
-		u8	txdata_8;
-		u16	txdata_16;
-		u32	txdata_32;
-	} txdata; 			/* PSC + 0xbc */
-#define txdata_8 txdata.txdata_8
-#define txdata_16 txdata.txdata_16
-#define txdata_32 txdata.txdata_32
-	u32		rxcmd;		/* PSC + 0xc0 */
-	u32		rxalarm;	/* PSC + 0xc4 */
-	u32		rxsr;		/* PSC + 0xc8 */
-	u32		rxisr;		/* PSC + 0xcc */
-	u32		rximr;		/* PSC + 0xd0 */
-	u32		rxcnt;		/* PSC + 0xd4 */
-	u32		rxptr;		/* PSC + 0xd8 */
-	u32		rxsz;		/* PSC + 0xdc */
-	u32		reserved3[7];
-	union {
-		u8	rxdata_8;
-		u16	rxdata_16;
-		u32	rxdata_32;
-	} rxdata; 			/* PSC + 0xfc */
-#define rxdata_8 rxdata.rxdata_8
-#define rxdata_16 rxdata.rxdata_16
-#define rxdata_32 rxdata.rxdata_32
-};
-
-#endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/include/asm-powerpc/mpc6xx.h b/include/asm-powerpc/mpc6xx.h
deleted file mode 100644
index effc2291beb2..000000000000
--- a/include/asm-powerpc/mpc6xx.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_POWERPC_MPC6xx_H
-#define __ASM_POWERPC_MPC6xx_H
-
-void mpc6xx_enter_standby(void);
-
-#endif
diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h
deleted file mode 100644
index 03317e1e6185..000000000000
--- a/include/asm-powerpc/mpc8260.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each.  Rather than change every
- * file that has to include MPC8260 configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_MPC8260_H__
-#define __ASM_POWERPC_MPC8260_H__
-
-#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */
-
-#ifdef CONFIG_8260
-
-#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
-#include <platforms/82xx/pq2ads.h>
-#endif
-
-#ifdef CONFIG_PCI_8260
-#include <platforms/82xx/m82xx_pci.h>
-#endif
-
-#endif /* CONFIG_8260 */
-#endif /* !__ASM_POWERPC_MPC8260_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h
deleted file mode 100644
index 15f650f987e7..000000000000
--- a/include/asm-powerpc/mpc86xx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * MPC86xx definitions
- *
- * Author: Jeff Brown
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_MPC86xx_H__
-#define __ASM_POWERPC_MPC86xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_PPC_86xx
-
-#define CPU0_BOOT_RELEASE 0x01000000
-#define CPU1_BOOT_RELEASE 0x02000000
-#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
-#define MCM_PORT_CONFIG_OFFSET 0x1010
-
-/* Offset from CCSRBAR */
-#define MPC86xx_MCM_OFFSET      (0x00000)
-#define MPC86xx_MCM_SIZE        (0x02000)
-
-#endif /* CONFIG_PPC_86xx */
-#endif /* __ASM_POWERPC_MPC86xx_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h
deleted file mode 100644
index 98f3c4f17328..000000000000
--- a/include/asm-powerpc/mpc8xx.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* This is the single file included by all MPC8xx build options.
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each.  Rather than change every
- * file that has to include MPC8xx configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifndef __CONFIG_8xx_DEFS
-#define __CONFIG_8xx_DEFS
-
-extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
-
-#endif /* __CONFIG_8xx_DEFS */
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
deleted file mode 100644
index fe566a348a86..000000000000
--- a/include/asm-powerpc/mpic.h
+++ /dev/null
@@ -1,481 +0,0 @@
-#ifndef _ASM_POWERPC_MPIC_H
-#define _ASM_POWERPC_MPIC_H
-#ifdef __KERNEL__
-
-#include <linux/irq.h>
-#include <linux/sysdev.h>
-#include <asm/dcr.h>
-
-/*
- * Global registers
- */
-
-#define MPIC_GREG_BASE			0x01000
-
-#define MPIC_GREG_FEATURE_0		0x00000
-#define		MPIC_GREG_FEATURE_LAST_SRC_MASK		0x07ff0000
-#define		MPIC_GREG_FEATURE_LAST_SRC_SHIFT	16
-#define		MPIC_GREG_FEATURE_LAST_CPU_MASK		0x00001f00
-#define		MPIC_GREG_FEATURE_LAST_CPU_SHIFT	8
-#define		MPIC_GREG_FEATURE_VERSION_MASK		0xff
-#define MPIC_GREG_FEATURE_1		0x00010
-#define MPIC_GREG_GLOBAL_CONF_0		0x00020
-#define		MPIC_GREG_GCONF_RESET			0x80000000
-#define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000
-#define		MPIC_GREG_GCONF_NO_BIAS			0x10000000
-#define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff
-#define		MPIC_GREG_GCONF_MCK			0x08000000
-#define MPIC_GREG_GLOBAL_CONF_1		0x00030
-#define		MPIC_GREG_GLOBAL_CONF_1_SIE		0x08000000
-#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK	0x70000000
-#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)	\
-			(((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)
-#define MPIC_GREG_VENDOR_0		0x00040
-#define MPIC_GREG_VENDOR_1		0x00050
-#define MPIC_GREG_VENDOR_2		0x00060
-#define MPIC_GREG_VENDOR_3		0x00070
-#define MPIC_GREG_VENDOR_ID		0x00080
-#define 	MPIC_GREG_VENDOR_ID_STEPPING_MASK	0x00ff0000
-#define 	MPIC_GREG_VENDOR_ID_STEPPING_SHIFT	16
-#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
-#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT	8
-#define 	MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
-#define MPIC_GREG_PROCESSOR_INIT	0x00090
-#define MPIC_GREG_IPI_VECTOR_PRI_0	0x000a0
-#define MPIC_GREG_IPI_VECTOR_PRI_1	0x000b0
-#define MPIC_GREG_IPI_VECTOR_PRI_2	0x000c0
-#define MPIC_GREG_IPI_VECTOR_PRI_3	0x000d0
-#define MPIC_GREG_IPI_STRIDE		0x10
-#define MPIC_GREG_SPURIOUS		0x000e0
-#define MPIC_GREG_TIMER_FREQ		0x000f0
-
-/*
- *
- * Timer registers
- */
-#define MPIC_TIMER_BASE			0x01100
-#define MPIC_TIMER_STRIDE		0x40
-
-#define MPIC_TIMER_CURRENT_CNT		0x00000
-#define MPIC_TIMER_BASE_CNT		0x00010
-#define MPIC_TIMER_VECTOR_PRI		0x00020
-#define MPIC_TIMER_DESTINATION		0x00030
-
-/*
- * Per-Processor registers
- */
-
-#define MPIC_CPU_THISBASE		0x00000
-#define MPIC_CPU_BASE			0x20000
-#define MPIC_CPU_STRIDE			0x01000
-
-#define MPIC_CPU_IPI_DISPATCH_0		0x00040
-#define MPIC_CPU_IPI_DISPATCH_1		0x00050
-#define MPIC_CPU_IPI_DISPATCH_2		0x00060
-#define MPIC_CPU_IPI_DISPATCH_3		0x00070
-#define MPIC_CPU_IPI_DISPATCH_STRIDE	0x00010
-#define MPIC_CPU_CURRENT_TASK_PRI	0x00080
-#define 	MPIC_CPU_TASKPRI_MASK			0x0000000f
-#define MPIC_CPU_WHOAMI			0x00090
-#define 	MPIC_CPU_WHOAMI_MASK			0x0000001f
-#define MPIC_CPU_INTACK			0x000a0
-#define MPIC_CPU_EOI			0x000b0
-#define MPIC_CPU_MCACK			0x000c0
-
-/*
- * Per-source registers
- */
-
-#define MPIC_IRQ_BASE			0x10000
-#define MPIC_IRQ_STRIDE			0x00020
-#define MPIC_IRQ_VECTOR_PRI		0x00000
-#define 	MPIC_VECPRI_MASK			0x80000000
-#define 	MPIC_VECPRI_ACTIVITY			0x40000000	/* Read Only */
-#define 	MPIC_VECPRI_PRIORITY_MASK		0x000f0000
-#define 	MPIC_VECPRI_PRIORITY_SHIFT		16
-#define 	MPIC_VECPRI_VECTOR_MASK			0x000007ff
-#define 	MPIC_VECPRI_POLARITY_POSITIVE		0x00800000
-#define 	MPIC_VECPRI_POLARITY_NEGATIVE		0x00000000
-#define 	MPIC_VECPRI_POLARITY_MASK		0x00800000
-#define 	MPIC_VECPRI_SENSE_LEVEL			0x00400000
-#define 	MPIC_VECPRI_SENSE_EDGE			0x00000000
-#define 	MPIC_VECPRI_SENSE_MASK			0x00400000
-#define MPIC_IRQ_DESTINATION		0x00010
-
-#define MPIC_MAX_IRQ_SOURCES	2048
-#define MPIC_MAX_CPUS		32
-#define MPIC_MAX_ISU		32
-
-/*
- * Tsi108 implementation of MPIC has many differences from the original one
- */
-
-/*
- * Global registers
- */
-
-#define TSI108_GREG_BASE		0x00000
-#define TSI108_GREG_FEATURE_0		0x00000
-#define TSI108_GREG_GLOBAL_CONF_0	0x00004
-#define TSI108_GREG_VENDOR_ID		0x0000c
-#define TSI108_GREG_IPI_VECTOR_PRI_0	0x00204		/* Doorbell 0 */
-#define TSI108_GREG_IPI_STRIDE		0x0c
-#define TSI108_GREG_SPURIOUS		0x00010
-#define TSI108_GREG_TIMER_FREQ		0x00014
-
-/*
- * Timer registers
- */
-#define TSI108_TIMER_BASE		0x0030
-#define TSI108_TIMER_STRIDE		0x10
-#define TSI108_TIMER_CURRENT_CNT	0x00000
-#define TSI108_TIMER_BASE_CNT		0x00004
-#define TSI108_TIMER_VECTOR_PRI		0x00008
-#define TSI108_TIMER_DESTINATION	0x0000c
-
-/*
- * Per-Processor registers
- */
-#define TSI108_CPU_BASE			0x00300
-#define TSI108_CPU_STRIDE		0x00040
-#define TSI108_CPU_IPI_DISPATCH_0	0x00200
-#define TSI108_CPU_IPI_DISPATCH_STRIDE	0x00000
-#define TSI108_CPU_CURRENT_TASK_PRI	0x00000
-#define TSI108_CPU_WHOAMI		0xffffffff
-#define TSI108_CPU_INTACK		0x00004
-#define TSI108_CPU_EOI			0x00008
-#define TSI108_CPU_MCACK		0x00004 /* Doesn't really exist here */
-
-/*
- * Per-source registers
- */
-#define TSI108_IRQ_BASE			0x00100
-#define TSI108_IRQ_STRIDE		0x00008
-#define TSI108_IRQ_VECTOR_PRI		0x00000
-#define TSI108_VECPRI_VECTOR_MASK	0x000000ff
-#define TSI108_VECPRI_POLARITY_POSITIVE	0x01000000
-#define TSI108_VECPRI_POLARITY_NEGATIVE	0x00000000
-#define TSI108_VECPRI_SENSE_LEVEL	0x02000000
-#define TSI108_VECPRI_SENSE_EDGE	0x00000000
-#define TSI108_VECPRI_POLARITY_MASK	0x01000000
-#define TSI108_VECPRI_SENSE_MASK	0x02000000
-#define TSI108_IRQ_DESTINATION		0x00004
-
-/* weird mpic register indices and mask bits in the HW info array */
-enum {
-	MPIC_IDX_GREG_BASE = 0,
-	MPIC_IDX_GREG_FEATURE_0,
-	MPIC_IDX_GREG_GLOBAL_CONF_0,
-	MPIC_IDX_GREG_VENDOR_ID,
-	MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
-	MPIC_IDX_GREG_IPI_STRIDE,
-	MPIC_IDX_GREG_SPURIOUS,
-	MPIC_IDX_GREG_TIMER_FREQ,
-
-	MPIC_IDX_TIMER_BASE,
-	MPIC_IDX_TIMER_STRIDE,
-	MPIC_IDX_TIMER_CURRENT_CNT,
-	MPIC_IDX_TIMER_BASE_CNT,
-	MPIC_IDX_TIMER_VECTOR_PRI,
-	MPIC_IDX_TIMER_DESTINATION,
-
-	MPIC_IDX_CPU_BASE,
-	MPIC_IDX_CPU_STRIDE,
-	MPIC_IDX_CPU_IPI_DISPATCH_0,
-	MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
-	MPIC_IDX_CPU_CURRENT_TASK_PRI,
-	MPIC_IDX_CPU_WHOAMI,
-	MPIC_IDX_CPU_INTACK,
-	MPIC_IDX_CPU_EOI,
-	MPIC_IDX_CPU_MCACK,
-
-	MPIC_IDX_IRQ_BASE,
-	MPIC_IDX_IRQ_STRIDE,
-	MPIC_IDX_IRQ_VECTOR_PRI,
-
-	MPIC_IDX_VECPRI_VECTOR_MASK,
-	MPIC_IDX_VECPRI_POLARITY_POSITIVE,
-	MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
-	MPIC_IDX_VECPRI_SENSE_LEVEL,
-	MPIC_IDX_VECPRI_SENSE_EDGE,
-	MPIC_IDX_VECPRI_POLARITY_MASK,
-	MPIC_IDX_VECPRI_SENSE_MASK,
-	MPIC_IDX_IRQ_DESTINATION,
-	MPIC_IDX_END
-};
-
-
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-/* Fixup table entry */
-struct mpic_irq_fixup
-{
-	u8 __iomem	*base;
-	u8 __iomem	*applebase;
-	u32		data;
-	unsigned int	index;
-};
-#endif /* CONFIG_MPIC_U3_HT_IRQS */
-
-
-enum mpic_reg_type {
-	mpic_access_mmio_le,
-	mpic_access_mmio_be,
-#ifdef CONFIG_PPC_DCR
-	mpic_access_dcr
-#endif
-};
-
-struct mpic_reg_bank {
-	u32 __iomem	*base;
-#ifdef CONFIG_PPC_DCR
-	dcr_host_t	dhost;
-#endif /* CONFIG_PPC_DCR */
-};
-
-struct mpic_irq_save {
-	u32		vecprio,
-			dest;
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-	u32		fixup_data;
-#endif
-};
-
-/* The instance data of a given MPIC */
-struct mpic
-{
-	/* The remapper for this MPIC */
-	struct irq_host		*irqhost;
-
-	/* The "linux" controller struct */
-	struct irq_chip		hc_irq;
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-	struct irq_chip		hc_ht_irq;
-#endif
-#ifdef CONFIG_SMP
-	struct irq_chip		hc_ipi;
-#endif
-	const char		*name;
-	/* Flags */
-	unsigned int		flags;
-	/* How many irq sources in a given ISU */
-	unsigned int		isu_size;
-	unsigned int		isu_shift;
-	unsigned int		isu_mask;
-	unsigned int		irq_count;
-	/* Number of sources */
-	unsigned int		num_sources;
-	/* Number of CPUs */
-	unsigned int		num_cpus;
-	/* default senses array */
-	unsigned char		*senses;
-	unsigned int		senses_count;
-
-	/* vector numbers used for internal sources (ipi/timers) */
-	unsigned int		ipi_vecs[4];
-	unsigned int		timer_vecs[4];
-
-	/* Spurious vector to program into unused sources */
-	unsigned int		spurious_vec;
-
-#ifdef CONFIG_MPIC_U3_HT_IRQS
-	/* The fixup table */
-	struct mpic_irq_fixup	*fixups;
-	spinlock_t		fixup_lock;
-#endif
-
-	/* Register access method */
-	enum mpic_reg_type	reg_type;
-
-	/* The various ioremap'ed bases */
-	struct mpic_reg_bank	gregs;
-	struct mpic_reg_bank	tmregs;
-	struct mpic_reg_bank	cpuregs[MPIC_MAX_CPUS];
-	struct mpic_reg_bank	isus[MPIC_MAX_ISU];
-
-	/* Protected sources */
-	unsigned long		*protected;
-
-#ifdef CONFIG_MPIC_WEIRD
-	/* Pointer to HW info array */
-	u32			*hw_set;
-#endif
-
-#ifdef CONFIG_PCI_MSI
-	spinlock_t		bitmap_lock;
-	unsigned long		*hwirq_bitmap;
-#endif
-
-#ifdef CONFIG_MPIC_BROKEN_REGREAD
-	u32			isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
-#endif
-
-	/* link */
-	struct mpic		*next;
-
-	struct sys_device	sysdev;
-
-#ifdef CONFIG_PM
-	struct mpic_irq_save	*save_data;
-#endif
-};
-
-/*
- * MPIC flags (passed to mpic_alloc)
- *
- * The top 4 bits contain an MPIC bhw id that is used to index the
- * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
- * Note setting any ID (leaving those bits to 0) means standard MPIC
- */
-
-/* This is the primary controller, only that one has IPIs and
- * has afinity control. A non-primary MPIC always uses CPU0
- * registers only
- */
-#define MPIC_PRIMARY			0x00000001
-
-/* Set this for a big-endian MPIC */
-#define MPIC_BIG_ENDIAN			0x00000002
-/* Broken U3 MPIC */
-#define MPIC_U3_HT_IRQS			0x00000004
-/* Broken IPI registers (autodetected) */
-#define MPIC_BROKEN_IPI			0x00000008
-/* MPIC wants a reset */
-#define MPIC_WANTS_RESET		0x00000010
-/* Spurious vector requires EOI */
-#define MPIC_SPV_EOI			0x00000020
-/* No passthrough disable */
-#define MPIC_NO_PTHROU_DIS		0x00000040
-/* DCR based MPIC */
-#define MPIC_USES_DCR			0x00000080
-/* MPIC has 11-bit vector fields (or larger) */
-#define MPIC_LARGE_VECTORS		0x00000100
-/* Enable delivery of prio 15 interrupts as MCK instead of EE */
-#define MPIC_ENABLE_MCK			0x00000200
-/* Disable bias among target selection, spread interrupts evenly */
-#define MPIC_NO_BIAS			0x00000400
-/* Ignore NIRQS as reported by FRR */
-#define MPIC_BROKEN_FRR_NIRQS		0x00000800
-
-/* MPIC HW modification ID */
-#define MPIC_REGSET_MASK		0xf0000000
-#define MPIC_REGSET(val)		(((val) & 0xf ) << 28)
-#define MPIC_GET_REGSET(flags)		(((flags) >> 28) & 0xf)
-
-#define	MPIC_REGSET_STANDARD		MPIC_REGSET(0)	/* Original MPIC */
-#define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
-
-/* Allocate the controller structure and setup the linux irq descs
- * for the range if interrupts passed in. No HW initialization is
- * actually performed.
- * 
- * @phys_addr:	physial base address of the MPIC
- * @flags:	flags, see constants above
- * @isu_size:	number of interrupts in an ISU. Use 0 to use a
- *              standard ISU-less setup (aka powermac)
- * @irq_offset: first irq number to assign to this mpic
- * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
- *	        to match the number of sources
- * @ipi_offset: first irq number to assign to this mpic IPI sources,
- *		used only on primary mpic
- * @senses:	array of sense values
- * @senses_num: number of entries in the array
- *
- * Note about the sense array. If none is passed, all interrupts are
- * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
- * case they are edge positive (and the array is ignored anyway).
- * The values in the array start at the first source of the MPIC,
- * that is senses[0] correspond to linux irq "irq_offset".
- */
-extern struct mpic *mpic_alloc(struct device_node *node,
-			       phys_addr_t phys_addr,
-			       unsigned int flags,
-			       unsigned int isu_size,
-			       unsigned int irq_count,
-			       const char *name);
-
-/* Assign ISUs, to call before mpic_init()
- *
- * @mpic:	controller structure as returned by mpic_alloc()
- * @isu_num:	ISU number
- * @phys_addr:	physical address of the ISU
- */
-extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
-			    phys_addr_t phys_addr);
-
-/* Set default sense codes
- *
- * @mpic:	controller
- * @senses:	array of sense codes
- * @count:	size of above array
- *
- * Optionally provide an array (indexed on hardware interrupt numbers
- * for this MPIC) of default sense codes for the chip. Those are linux
- * sense codes IRQ_TYPE_*
- *
- * The driver gets ownership of the pointer, don't dispose of it or
- * anything like that. __init only.
- */
-extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
-
-
-/* Initialize the controller. After this has been called, none of the above
- * should be called again for this mpic
- */
-extern void mpic_init(struct mpic *mpic);
-
-/*
- * All of the following functions must only be used after the
- * ISUs have been assigned and the controller fully initialized
- * with mpic_init()
- */
-
-
-/* Change the priority of an interrupt. Default is 8 for irqs and
- * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
- * IPI number is then the offset'ed (linux irq number mapped to the IPI)
- */
-extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-
-/* Setup a non-boot CPU */
-extern void mpic_setup_this_cpu(void);
-
-/* Clean up for kexec (or cpu offline or ...) */
-extern void mpic_teardown_this_cpu(int secondary);
-
-/* Get the current cpu priority for this cpu (0..15) */
-extern int mpic_cpu_get_priority(void);
-
-/* Set the current cpu priority for this cpu */
-extern void mpic_cpu_set_priority(int prio);
-
-/* Request IPIs on primary mpic */
-extern void mpic_request_ipis(void);
-
-/* Send an IPI (non offseted number 0..3) */
-extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
-
-/* Send a message (IPI) to a given target (cpu number or MSG_*) */
-void smp_mpic_message_pass(int target, int msg);
-
-/* Unmask a specific virq */
-extern void mpic_unmask_irq(unsigned int irq);
-/* Mask a specific virq */
-extern void mpic_mask_irq(unsigned int irq);
-/* EOI a specific virq */
-extern void mpic_end_irq(unsigned int irq);
-
-/* Fetch interrupt from a given mpic */
-extern unsigned int mpic_get_one_irq(struct mpic *mpic);
-/* This one gets from the primary mpic */
-extern unsigned int mpic_get_irq(void);
-/* Fetch Machine Check interrupt from primary mpic */
-extern unsigned int mpic_get_mcirq(void);
-
-/* Set the EPIC clock ratio */
-void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
-
-/* Enable/Disable EPIC serial interrupt mode */
-void mpic_set_serial_int(struct mpic *mpic, int enable);
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_MPIC_H */
diff --git a/include/asm-powerpc/msgbuf.h b/include/asm-powerpc/msgbuf.h
deleted file mode 100644
index dd76743c7537..000000000000
--- a/include/asm-powerpc/msgbuf.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASM_POWERPC_MSGBUF_H
-#define _ASM_POWERPC_MSGBUF_H
-
-/*
- * The msqid64_ds structure for the PowerPC architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-#ifndef __powerpc64__
-	unsigned int	__unused1;
-#endif
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-#ifndef __powerpc64__
-	unsigned int	__unused2;
-#endif
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#ifndef __powerpc64__
-	unsigned int	__unused3;
-#endif
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif	/* _ASM_POWERPC_MSGBUF_H */
diff --git a/include/asm-powerpc/mutex.h b/include/asm-powerpc/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-powerpc/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-powerpc/namei.h b/include/asm-powerpc/namei.h
deleted file mode 100644
index 657443474a6a..000000000000
--- a/include/asm-powerpc/namei.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_NAMEI_H
-#define _ASM_POWERPC_NAMEI_H
-
-#ifdef __KERNEL__
-
-/*
- * Adapted from include/asm-alpha/namei.h
- *
- * Included from fs/namei.c
- */
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_NAMEI_H */
diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h
deleted file mode 100644
index efde5ac82f7b..000000000000
--- a/include/asm-powerpc/nvram.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * NVRAM definitions and access functions.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_NVRAM_H
-#define _ASM_POWERPC_NVRAM_H
-
-#include <linux/errno.h>
-
-#define NVRW_CNT 0x20
-#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
-#define NVRAM_BLOCK_LEN 16
-#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN)
-#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN)
-
-#define NVRAM_AS0  0x74
-#define NVRAM_AS1  0x75
-#define NVRAM_DATA 0x77
-
-
-/* RTC Offsets */
-
-#define MOTO_RTC_SECONDS	0x1FF9
-#define MOTO_RTC_MINUTES	0x1FFA
-#define MOTO_RTC_HOURS		0x1FFB
-#define MOTO_RTC_DAY_OF_WEEK	0x1FFC
-#define MOTO_RTC_DAY_OF_MONTH	0x1FFD
-#define MOTO_RTC_MONTH		0x1FFE
-#define MOTO_RTC_YEAR		0x1FFF
-#define MOTO_RTC_CONTROLA       0x1FF8
-#define MOTO_RTC_CONTROLB       0x1FF9
-
-#define NVRAM_SIG_SP	0x02	/* support processor */
-#define NVRAM_SIG_OF	0x50	/* open firmware config */
-#define NVRAM_SIG_FW	0x51	/* general firmware */
-#define NVRAM_SIG_HW	0x52	/* hardware (VPD) */
-#define NVRAM_SIG_FLIP	0x5a	/* Apple flip/flop header */
-#define NVRAM_SIG_APPL	0x5f	/* Apple "system" (???) */
-#define NVRAM_SIG_SYS	0x70	/* system env vars */
-#define NVRAM_SIG_CFG	0x71	/* config data */
-#define NVRAM_SIG_ELOG	0x72	/* error log */
-#define NVRAM_SIG_VEND	0x7e	/* vendor defined */
-#define NVRAM_SIG_FREE	0x7f	/* Free space */
-#define NVRAM_SIG_OS	0xa0	/* OS defined */
-#define NVRAM_SIG_PANIC	0xa1	/* Apple OSX "panic" */
-
-/* If change this size, then change the size of NVNAME_LEN */
-struct nvram_header {
-	unsigned char signature;
-	unsigned char checksum;
-	unsigned short length;
-	char name[12];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-
-struct nvram_partition {
-	struct list_head partition;
-	struct nvram_header header;
-	unsigned int index;
-};
-
-
-extern int nvram_write_error_log(char * buff, int length,
-					 unsigned int err_type, unsigned int err_seq);
-extern int nvram_read_error_log(char * buff, int length,
-					 unsigned int * err_type, unsigned int *err_seq);
-extern int nvram_clear_error_log(void);
-extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
-
-extern int pSeries_nvram_init(void);
-
-#ifdef CONFIG_MMIO_NVRAM
-extern int mmio_nvram_init(void);
-#else
-static inline int mmio_nvram_init(void)
-{
-	return -ENODEV;
-}
-#endif
-
-#endif /* __KERNEL__ */
-
-/* PowerMac specific nvram stuffs */
-
-enum {
-	pmac_nvram_OF,		/* Open Firmware partition */
-	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
-	pmac_nvram_NR		/* MacOS Name Registry partition */
-};
-
-#ifdef __KERNEL__
-/* Return partition offset in nvram */
-extern int	pmac_get_partition(int partition);
-
-/* Direct access to XPRAM on PowerMacs */
-extern u8	pmac_xpram_read(int xpaddr);
-extern void	pmac_xpram_write(int xpaddr, u8 data);
-
-/* Synchronize NVRAM */
-extern void	nvram_sync(void);
-
-/* Normal access to NVRAM */
-extern unsigned char nvram_read_byte(int i);
-extern void nvram_write_byte(unsigned char c, int i);
-#endif
-
-/* Some offsets in XPRAM */
-#define PMAC_XPRAM_MACHINE_LOC	0xe4
-#define PMAC_XPRAM_SOUND_VOLUME	0x08
-
-/* Machine location structure in PowerMac XPRAM */
-struct pmac_machine_location {
-	unsigned int	latitude;	/* 2+30 bit Fractional number */
-	unsigned int	longitude;	/* 2+30 bit Fractional number */
-	unsigned int	delta;		/* mix of GMT delta and DLS */
-};
-
-/*
- * /dev/nvram ioctls
- *
- * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
- * definitely obsolete. Do not use it if you can avoid it
- */
-
-#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
-				_IOWR('p', 0x40, int)
-
-#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
-#define IOC_NVRAM_SYNC		_IO('p', 0x43)		/* Sync NVRAM image */
-
-#endif /* _ASM_POWERPC_NVRAM_H */
diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h
deleted file mode 100644
index 3c123990ca2e..000000000000
--- a/include/asm-powerpc/of_device.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ASM_POWERPC_OF_DEVICE_H
-#define _ASM_POWERPC_OF_DEVICE_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/of.h>
-
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
-	struct device_node	*node;		/* to be obsoleted */
-	u64			dma_mask;	/* DMA mask */
-	struct device		dev;		/* Generic device interface */
-};
-
-extern struct of_device *of_device_alloc(struct device_node *np,
-					 const char *bus_id,
-					 struct device *parent);
-
-extern int of_device_uevent(struct device *dev,
-			    struct kobj_uevent_env *env);
-
-/* This is just here during the transition */
-#include <linux/of_device.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/include/asm-powerpc/of_platform.h b/include/asm-powerpc/of_platform.h
deleted file mode 100644
index 18659ef72139..000000000000
--- a/include/asm-powerpc/of_platform.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASM_POWERPC_OF_PLATFORM_H
-#define _ASM_POWERPC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
-	return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
-	of_unregister_driver(drv);
-}
-
-/* Platform devices and busses creation */
-extern struct of_device *of_platform_device_create(struct device_node *np,
-						   const char *bus_id,
-						   struct device *parent);
-/* pseudo "matches" value to not do deep probe */
-#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
-
-extern int of_platform_bus_probe(struct device_node *root,
-				 const struct of_device_id *matches,
-				 struct device *parent);
-
-extern struct of_device *of_find_device_by_phandle(phandle ph);
-
-extern void of_instantiate_rtc(void);
-
-#endif	/* _ASM_POWERPC_OF_PLATFORM_H */
diff --git a/include/asm-powerpc/ohare.h b/include/asm-powerpc/ohare.h
deleted file mode 100644
index 0d030f9dea24..000000000000
--- a/include/asm-powerpc/ohare.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _ASM_POWERPC_OHARE_H
-#define _ASM_POWERPC_OHARE_H
-#ifdef __KERNEL__
-/*
- * ohare.h: definitions for using the "O'Hare" I/O controller chip.
- *
- * Copyright (C) 1997 Paul Mackerras.
- *
- * BenH: Changed to match those of heathrow (but not all of them). Please
- *       check if I didn't break anything (especially the media bay).
- */
-
-/* offset from ohare base for feature control register */
-#define OHARE_MBCR	0x34
-#define OHARE_FCR	0x38
-
-/*
- * Bits in feature control register.
- * These were mostly derived by experiment on a powerbook 3400
- * and may differ for other machines.
- */
-#define OH_SCC_RESET		1
-#define OH_BAY_POWER_N		2	/* a guess */
-#define OH_BAY_PCI_ENABLE	4	/* a guess */
-#define OH_BAY_IDE_ENABLE	8
-#define OH_BAY_FLOPPY_ENABLE	0x10
-#define OH_IDE0_ENABLE		0x20
-#define OH_IDE0_RESET_N		0x40	/* a guess */
-#define OH_BAY_DEV_MASK		0x1c
-#define OH_BAY_RESET_N		0x80
-#define OH_IOBUS_ENABLE		0x100	/* IOBUS seems to be IDE */
-#define OH_SCC_ENABLE		0x200
-#define OH_MESH_ENABLE		0x400
-#define OH_FLOPPY_ENABLE	0x800
-#define OH_SCCA_IO		0x4000
-#define OH_SCCB_IO		0x8000
-#define OH_VIA_ENABLE		0x10000	/* Is apparently wrong, to be verified */
-#define OH_IDE1_RESET_N		0x800000
-
-/*
- * Bits to set in the feature control register on PowerBooks.
- */
-#define PBOOK_FEATURES		(OH_IDE_ENABLE | OH_SCC_ENABLE | \
-				 OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
-
-/*
- * A magic value to put into the feature control register of the
- * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
- * Contributed by Harry Eaton.
- */
-#define STARMAX_FEATURES	0xbeff7a
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OHARE_H */
diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h
deleted file mode 100644
index 95035c602ba6..000000000000
--- a/include/asm-powerpc/oprofile_impl.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
-#define _ASM_POWERPC_OPROFILE_IMPL_H
-#ifdef __KERNEL__
-
-#define OP_MAX_COUNTER 8
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Classic doesn't support per-counter user/kernel selection */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-#ifdef CONFIG_PPC64
-	unsigned long mmcr0;
-	unsigned long mmcr1;
-	unsigned long mmcra;
-#endif
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Per-arch configuration */
-struct op_powerpc_model {
-	int (*reg_setup) (struct op_counter_config *,
-			   struct op_system_config *,
-			   int num_counters);
-	int  (*cpu_setup) (struct op_counter_config *);
-	int  (*start) (struct op_counter_config *);
-	int  (*global_start) (struct op_counter_config *);
-	void (*stop) (void);
-	void (*global_stop) (void);
-	int (*sync_start)(void);
-	int (*sync_stop)(void);
-	void (*handle_interrupt) (struct pt_regs *,
-				  struct op_counter_config *);
-	int num_counters;
-};
-
-extern struct op_powerpc_model op_model_fsl_emb;
-extern struct op_powerpc_model op_model_rs64;
-extern struct op_powerpc_model op_model_power4;
-extern struct op_powerpc_model op_model_7450;
-extern struct op_powerpc_model op_model_cell;
-extern struct op_powerpc_model op_model_pa6t;
-
-
-/* All the classic PPC parts use these */
-static inline unsigned int classic_ctr_read(unsigned int i)
-{
-	switch(i) {
-	case 0:
-		return mfspr(SPRN_PMC1);
-	case 1:
-		return mfspr(SPRN_PMC2);
-	case 2:
-		return mfspr(SPRN_PMC3);
-	case 3:
-		return mfspr(SPRN_PMC4);
-	case 4:
-		return mfspr(SPRN_PMC5);
-	case 5:
-		return mfspr(SPRN_PMC6);
-
-/* No PPC32 chip has more than 6 so far */
-#ifdef CONFIG_PPC64
-	case 6:
-		return mfspr(SPRN_PMC7);
-	case 7:
-		return mfspr(SPRN_PMC8);
-#endif
-	default:
-		return 0;
-	}
-}
-
-static inline void classic_ctr_write(unsigned int i, unsigned int val)
-{
-	switch(i) {
-	case 0:
-		mtspr(SPRN_PMC1, val);
-		break;
-	case 1:
-		mtspr(SPRN_PMC2, val);
-		break;
-	case 2:
-		mtspr(SPRN_PMC3, val);
-		break;
-	case 3:
-		mtspr(SPRN_PMC4, val);
-		break;
-	case 4:
-		mtspr(SPRN_PMC5, val);
-		break;
-	case 5:
-		mtspr(SPRN_PMC6, val);
-		break;
-
-/* No PPC32 chip has more than 6, yet */
-#ifdef CONFIG_PPC64
-	case 6:
-		mtspr(SPRN_PMC7, val);
-		break;
-	case 7:
-		mtspr(SPRN_PMC8, val);
-		break;
-#endif
-	default:
-		break;
-	}
-}
-
-
-extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/include/asm-powerpc/pSeries_reconfig.h b/include/asm-powerpc/pSeries_reconfig.h
deleted file mode 100644
index e482e5352e69..000000000000
--- a/include/asm-powerpc/pSeries_reconfig.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _PPC64_PSERIES_RECONFIG_H
-#define _PPC64_PSERIES_RECONFIG_H
-#ifdef __KERNEL__
-
-#include <linux/notifier.h>
-
-/*
- * Use this API if your code needs to know about OF device nodes being
- * added or removed on pSeries systems.
- */
-
-#define PSERIES_RECONFIG_ADD		0x0001
-#define PSERIES_RECONFIG_REMOVE		0x0002
-#define PSERIES_DRCONF_MEM_ADD		0x0003
-#define PSERIES_DRCONF_MEM_REMOVE	0x0004
-
-#ifdef CONFIG_PPC_PSERIES
-extern int pSeries_reconfig_notifier_register(struct notifier_block *);
-extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
-#else /* !CONFIG_PPC_PSERIES */
-static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
-{
-	return 0;
-}
-static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
-#endif /* CONFIG_PPC_PSERIES */
-
-#endif /* __KERNEL__ */
-#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h
deleted file mode 100644
index 7b564444ff61..000000000000
--- a/include/asm-powerpc/paca.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * include/asm-powerpc/paca.h
- *
- * This control block defines the PACA which defines the processor
- * specific data for each logical processor on the system.
- * There are some pointers defined that are utilized by PLIC.
- *
- * C 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_PACA_H
-#define _ASM_POWERPC_PACA_H
-#ifdef __KERNEL__
-
-#include	<asm/types.h>
-#include	<asm/lppaca.h>
-#include	<asm/mmu.h>
-
-register struct paca_struct *local_paca asm("r13");
-
-#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP)
-extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
-/*
- * Add standard checks that preemption cannot occur when using get_paca():
- * otherwise the paca_struct it points to may be the wrong one just after.
- */
-#define get_paca()	((void) debug_smp_processor_id(), local_paca)
-#else
-#define get_paca()	local_paca
-#endif
-
-#define get_lppaca()	(get_paca()->lppaca_ptr)
-#define get_slb_shadow()	(get_paca()->slb_shadow_ptr)
-
-struct task_struct;
-
-/*
- * Defines the layout of the paca.
- *
- * This structure is not directly accessed by firmware or the service
- * processor.
- */
-struct paca_struct {
-	/*
-	 * Because hw_cpu_id, unlike other paca fields, is accessed
-	 * routinely from other CPUs (from the IRQ code), we stick to
-	 * read-only (after boot) fields in the first cacheline to
-	 * avoid cacheline bouncing.
-	 */
-
-	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
-
-	/*
-	 * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
-	 * load lock_token and paca_index with a single lwz
-	 * instruction.  They must travel together and be properly
-	 * aligned.
-	 */
-	u16 lock_token;			/* Constant 0x8000, used in locks */
-	u16 paca_index;			/* Logical processor number */
-
-	u64 kernel_toc;			/* Kernel TOC address */
-	u64 stab_real;			/* Absolute address of segment table */
-	u64 stab_addr;			/* Virtual address of segment table */
-	void *emergency_sp;		/* pointer to emergency stack */
-	u64 data_offset;		/* per cpu data offset */
-	s16 hw_cpu_id;			/* Physical processor number */
-	u8 cpu_start;			/* At startup, processor spins until */
-					/* this becomes non-zero. */
-	struct slb_shadow *slb_shadow_ptr;
-
-	/*
-	 * Now, starting in cacheline 2, the exception save areas
-	 */
-	/* used for most interrupts/exceptions */
-	u64 exgen[10] __attribute__((aligned(0x80)));
-	u64 exmc[10];		/* used for machine checks */
-	u64 exslb[10];		/* used for SLB/segment table misses
- 				 * on the linear mapping */
-
-	mm_context_t context;
-	u16 vmalloc_sllp;
-	u16 slb_cache_ptr;
-	u16 slb_cache[SLB_CACHE_ENTRIES];
-
-	/*
-	 * then miscellaneous read-write fields
-	 */
-	struct task_struct *__current;	/* Pointer to current */
-	u64 kstack;			/* Saved Kernel stack addr */
-	u64 stab_rr;			/* stab/slb round-robin counter */
-	u64 saved_r1;			/* r1 save for RTAS calls */
-	u64 saved_msr;			/* MSR saved here by enter_rtas */
-	u16 trap_save;			/* Used when bad stack is encountered */
-	u8 soft_enabled;		/* irq soft-enable flag */
-	u8 hard_enabled;		/* set if irqs are enabled in MSR */
-	u8 io_sync;			/* writel() needs spin_unlock sync */
-
-	/* Stuff for accurate time accounting */
-	u64 user_time;			/* accumulated usermode TB ticks */
-	u64 system_time;		/* accumulated system TB ticks */
-	u64 startpurr;			/* PURR/TB value snapshot */
-	u64 startspurr;			/* SPURR value snapshot */
-};
-
-extern struct paca_struct paca[];
-extern void initialise_pacas(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PACA_H */
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
deleted file mode 100644
index cffdf0eb0df6..000000000000
--- a/include/asm-powerpc/page.h
+++ /dev/null
@@ -1,228 +0,0 @@
-#ifndef _ASM_POWERPC_PAGE_H
-#define _ASM_POWERPC_PAGE_H
-
-/*
- * Copyright (C) 2001,2005 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/asm-compat.h>
-#include <asm/kdump.h>
-#include <asm/types.h>
-
-/*
- * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
- * page size. When using 64K pages however, whether we are really supporting
- * 64K pages in HW or not is irrelevant to those definitions.
- */
-#ifdef CONFIG_PPC_64K_PAGES
-#define PAGE_SHIFT		16
-#else
-#define PAGE_SHIFT		12
-#endif
-
-#define PAGE_SIZE		(ASM_CONST(1) << PAGE_SHIFT)
-
-/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
-#define __HAVE_ARCH_GATE_AREA		1
-
-/*
- * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we
- * assign PAGE_MASK to a larger type it gets extended the way we want
- * (i.e. with 1s in the high bits)
- */
-#define PAGE_MASK      (~((1 << PAGE_SHIFT) - 1))
-
-/*
- * KERNELBASE is the virtual address of the start of the kernel, it's often
- * the same as PAGE_OFFSET, but _might not be_.
- *
- * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
- *
- * PAGE_OFFSET is the virtual address of the start of lowmem.
- *
- * PHYSICAL_START is the physical address of the start of the kernel.
- *
- * MEMORY_START is the physical address of the start of lowmem.
- *
- * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
- * ppc32 and based on how they are set we determine MEMORY_START.
- *
- * For the linear mapping the following equation should be true:
- * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
- *
- * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
- *
- * There are two was to determine a physical address from a virtual one:
- * va = pa + PAGE_OFFSET - MEMORY_START
- * va = pa + KERNELBASE - PHYSICAL_START
- *
- * If you want to know something's offset from the start of the kernel you
- * should subtract KERNELBASE.
- *
- * If you want to test if something's a kernel address, use is_kernel_addr().
- */
-
-#define KERNELBASE      ASM_CONST(CONFIG_KERNEL_START)
-#define PAGE_OFFSET	ASM_CONST(CONFIG_PAGE_OFFSET)
-#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
-
-#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
-#ifndef __ASSEMBLY__
-extern phys_addr_t memstart_addr;
-extern phys_addr_t kernstart_addr;
-#endif
-#define PHYSICAL_START	kernstart_addr
-#define MEMORY_START	memstart_addr
-#else
-#define PHYSICAL_START	ASM_CONST(CONFIG_PHYSICAL_START)
-#define MEMORY_START	(PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
-#endif
-
-#ifdef CONFIG_FLATMEM
-#define ARCH_PFN_OFFSET		(MEMORY_START >> PAGE_SHIFT)
-#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
-#endif
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
-#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
-
-/*
- * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
- * and needs to be executable.  This means the whole heap ends
- * up being executable.
- */
-#define VM_DATA_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_DATA_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#ifdef __powerpc64__
-#include <asm/page_64.h>
-#else
-#include <asm/page_32.h>
-#endif
-
-/* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
-
-/* align addr on a size boundary - adjust address up if needed */
-#define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	_ALIGN(addr, PAGE_SIZE)
-
-/*
- * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
- * "kernelness", use is_kernel_addr() - it should do what you want.
- */
-#define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
-
-#ifndef __ASSEMBLY__
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/* These are used to make use of C type-checking. */
-
-/* PTE level */
-typedef struct { pte_basic_t pte; } pte_t;
-#define pte_val(x)	((x).pte)
-#define __pte(x)	((pte_t) { (x) })
-
-/* 64k pages additionally define a bigger "real PTE" type that gathers
- * the "second half" part of the PTE for pseudo 64k pages
- */
-#ifdef CONFIG_PPC_64K_PAGES
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
-#else
-typedef struct { pte_t pte; } real_pte_t;
-#endif
-
-/* PMD level */
-#ifdef CONFIG_PPC64
-typedef struct { unsigned long pmd; } pmd_t;
-#define pmd_val(x)	((x).pmd)
-#define __pmd(x)	((pmd_t) { (x) })
-
-/* PUD level exusts only on 4k pages */
-#ifndef CONFIG_PPC_64K_PAGES
-typedef struct { unsigned long pud; } pud_t;
-#define pud_val(x)	((x).pud)
-#define __pud(x)	((pud_t) { (x) })
-#endif /* !CONFIG_PPC_64K_PAGES */
-#endif /* CONFIG_PPC64 */
-
-/* PGD level */
-typedef struct { unsigned long pgd; } pgd_t;
-#define pgd_val(x)	((x).pgd)
-#define __pgd(x)	((pgd_t) { (x) })
-
-/* Page protection bits */
-typedef struct { unsigned long pgprot; } pgprot_t;
-#define pgprot_val(x)	((x).pgprot)
-#define __pgprot(x)	((pgprot_t) { (x) })
-
-#else
-
-/*
- * .. while these make it easier on the compiler
- */
-
-typedef pte_basic_t pte_t;
-#define pte_val(x)	(x)
-#define __pte(x)	(x)
-
-#ifdef CONFIG_PPC_64K_PAGES
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
-#else
-typedef unsigned long real_pte_t;
-#endif
-
-
-#ifdef CONFIG_PPC64
-typedef unsigned long pmd_t;
-#define pmd_val(x)	(x)
-#define __pmd(x)	(x)
-
-#ifndef CONFIG_PPC_64K_PAGES
-typedef unsigned long pud_t;
-#define pud_val(x)	(x)
-#define __pud(x)	(x)
-#endif /* !CONFIG_PPC_64K_PAGES */
-#endif /* CONFIG_PPC64 */
-
-typedef unsigned long pgd_t;
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-
-typedef unsigned long pgprot_t;
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-
-#endif
-
-struct page;
-extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
-extern void copy_user_page(void *to, void *from, unsigned long vaddr,
-		struct page *p);
-extern int page_is_ram(unsigned long pfn);
-
-struct vm_area_struct;
-
-typedef struct page *pgtable_t;
-
-#include <asm-generic/memory_model.h>
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PAGE_H */
diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h
deleted file mode 100644
index ebfae530a379..000000000000
--- a/include/asm-powerpc/page_32.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_POWERPC_PAGE_32_H
-#define _ASM_POWERPC_PAGE_32_H
-
-#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
-#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
-#endif
-#endif
-
-#define VM_DATA_DEFAULT_FLAGS	VM_DATA_DEFAULT_FLAGS32
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
- * physical addressing.  For now this just the IBM PPC440.
- */
-#ifdef CONFIG_PTE_64BIT
-typedef unsigned long long pte_basic_t;
-#define PTE_SHIFT	(PAGE_SHIFT - 3)	/* 512 ptes per page */
-#else
-typedef unsigned long pte_basic_t;
-#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
-#endif
-
-struct page;
-extern void clear_pages(void *page, int order);
-static inline void clear_page(void *page) { clear_pages(page, 0); }
-extern void copy_page(void *to, void *from);
-
-#include <asm-generic/page.h>
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
deleted file mode 100644
index 02fd80710e9d..000000000000
--- a/include/asm-powerpc/page_64.h
+++ /dev/null
@@ -1,184 +0,0 @@
-#ifndef _ASM_POWERPC_PAGE_64_H
-#define _ASM_POWERPC_PAGE_64_H
-
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux
- * specific, every notion of page number shared with the firmware, TCEs,
- * iommu, etc... still uses a page size of 4K.
- */
-#define HW_PAGE_SHIFT		12
-#define HW_PAGE_SIZE		(ASM_CONST(1) << HW_PAGE_SHIFT)
-#define HW_PAGE_MASK		(~(HW_PAGE_SIZE-1))
-
-/*
- * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and
- * HW_PAGE_SHIFT, that is 4K pages.
- */
-#define PAGE_FACTOR		(PAGE_SHIFT - HW_PAGE_SHIFT)
-
-/* Segment size; normal 256M segments */
-#define SID_SHIFT		28
-#define SID_MASK		ASM_CONST(0xfffffffff)
-#define ESID_MASK		0xfffffffff0000000UL
-#define GET_ESID(x)		(((x) >> SID_SHIFT) & SID_MASK)
-
-/* 1T segments */
-#define SID_SHIFT_1T		40
-#define SID_MASK_1T		0xffffffUL
-#define ESID_MASK_1T		0xffffff0000000000UL
-#define GET_ESID_1T(x)		(((x) >> SID_SHIFT_1T) & SID_MASK_1T)
-
-#ifndef __ASSEMBLY__
-#include <asm/cache.h>
-
-typedef unsigned long pte_basic_t;
-
-static __inline__ void clear_page(void *addr)
-{
-	unsigned long lines, line_size;
-
-	line_size = ppc64_caches.dline_size;
-	lines = ppc64_caches.dlines_per_page;
-
-	__asm__ __volatile__(
-	"mtctr	%1	# clear_page\n\
-1:      dcbz	0,%0\n\
-	add	%0,%0,%3\n\
-	bdnz+	1b"
-        : "=r" (addr)
-        : "r" (lines), "0" (addr), "r" (line_size)
-	: "ctr", "memory");
-}
-
-extern void copy_4K_page(void *to, void *from);
-
-#ifdef CONFIG_PPC_64K_PAGES
-static inline void copy_page(void *to, void *from)
-{
-	unsigned int i;
-	for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
-		copy_4K_page(to, from);
-		to += 4096;
-		from += 4096;
-	}
-}
-#else /* CONFIG_PPC_64K_PAGES */
-static inline void copy_page(void *to, void *from)
-{
-	copy_4K_page(to, from);
-}
-#endif /* CONFIG_PPC_64K_PAGES */
-
-/* Log 2 of page table size */
-extern u64 ppc64_pft_size;
-
-/* Large pages size */
-#ifdef CONFIG_HUGETLB_PAGE
-extern unsigned int HPAGE_SHIFT;
-#else
-#define HPAGE_SHIFT PAGE_SHIFT
-#endif
-#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PPC_MM_SLICES
-
-#define SLICE_LOW_SHIFT		28
-#define SLICE_HIGH_SHIFT	40
-
-#define SLICE_LOW_TOP		(0x100000000ul)
-#define SLICE_NUM_LOW		(SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
-#define SLICE_NUM_HIGH		(PGTABLE_RANGE >> SLICE_HIGH_SHIFT)
-
-#define GET_LOW_SLICE_INDEX(addr)	((addr) >> SLICE_LOW_SHIFT)
-#define GET_HIGH_SLICE_INDEX(addr)	((addr) >> SLICE_HIGH_SHIFT)
-
-#ifndef __ASSEMBLY__
-
-struct slice_mask {
-	u16 low_slices;
-	u16 high_slices;
-};
-
-struct mm_struct;
-
-extern unsigned long slice_get_unmapped_area(unsigned long addr,
-					     unsigned long len,
-					     unsigned long flags,
-					     unsigned int psize,
-					     int topdown,
-					     int use_cache);
-
-extern unsigned int get_slice_psize(struct mm_struct *mm,
-				    unsigned long addr);
-
-extern void slice_init_context(struct mm_struct *mm, unsigned int psize);
-extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
-extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
-				  unsigned long len, unsigned int psize);
-
-#define slice_mm_new_context(mm)	((mm)->context.id == 0)
-
-#endif /* __ASSEMBLY__ */
-#else
-#define slice_init()
-#define get_slice_psize(mm, addr)	((mm)->context.user_psize)
-#define slice_set_user_psize(mm, psize)		\
-do {						\
-	(mm)->context.user_psize = (psize);	\
-	(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
-} while (0)
-#define slice_set_range_psize(mm, start, len, psize)	\
-	slice_set_user_psize((mm), (psize))
-#define slice_mm_new_context(mm)	1
-#endif /* CONFIG_PPC_MM_SLICES */
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-
-#endif /* !CONFIG_HUGETLB_PAGE */
-
-#ifdef MODULE
-#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
-#else
-#define __page_aligned \
-	__attribute__((__aligned__(PAGE_SIZE), \
-		__section__(".data.page_aligned")))
-#endif
-
-#define VM_DATA_DEFAULT_FLAGS \
-	(test_thread_flag(TIF_32BIT) ? \
-	 VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
-
-/*
- * This is the default if a program doesn't have a PT_GNU_STACK
- * program header entry. The PPC64 ELF ABI has a non executable stack
- * stack by default, so in the absense of a PT_GNU_STACK program header
- * we turn execute permission off.
- */
-#define VM_STACK_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_STACK_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#define VM_STACK_DEFAULT_FLAGS \
-	(test_thread_flag(TIF_32BIT) ? \
-	 VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64)
-
-#include <asm-generic/page.h>
-
-#endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/include/asm-powerpc/param.h b/include/asm-powerpc/param.h
deleted file mode 100644
index 094f63d4d5ca..000000000000
--- a/include/asm-powerpc/param.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_POWERPC_PARAM_H
-#define _ASM_POWERPC_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif	/* _ASM_POWERPC_PARAM_H */
diff --git a/include/asm-powerpc/parport.h b/include/asm-powerpc/parport.h
deleted file mode 100644
index 414c50e2e881..000000000000
--- a/include/asm-powerpc/parport.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * parport.h: platform-specific PC-style parport initialisation
- *
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef _ASM_POWERPC_PARPORT_H
-#define _ASM_POWERPC_PARPORT_H
-#ifdef __KERNEL__
-
-#include <asm/prom.h>
-
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	struct device_node *np;
-	const u32 *prop;
-	u32 io1, io2;
-	int propsize;
-	int count = 0;
-	for (np = NULL; (np = of_find_compatible_node(np,
-						      "parallel",
-						      "pnpPNP,400")) != NULL;) {
-		prop = of_get_property(np, "reg", &propsize);
-		if (!prop || propsize > 6*sizeof(u32))
-			continue;
-		io1 = prop[1]; io2 = prop[2];
-		prop = of_get_property(np, "interrupts", NULL);
-		if (!prop)
-			continue;
-		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
-			count++;
-	}
-	return count;
-}
-
-#endif /* __KERNEL__ */
-#endif /* !(_ASM_POWERPC_PARPORT_H) */
diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h
deleted file mode 100644
index 19fd7933e2d9..000000000000
--- a/include/asm-powerpc/pasemi_dma.h
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * Copyright (C) 2006-2008 PA Semi, Inc
- *
- * Hardware register layout and descriptor formats for the on-board
- * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
- * drivers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef ASM_PASEMI_DMA_H
-#define ASM_PASEMI_DMA_H
-
-/* status register layout in IOB region, at 0xfb800000 */
-struct pasdma_status {
-	u64 rx_sta[64];		/* RX channel status */
-	u64 tx_sta[20];		/* TX channel status */
-};
-
-
-/* All these registers live in the PCI configuration space for the DMA PCI
- * device. Use the normal PCI config access functions for them.
- */
-enum {
-	PAS_DMA_CAP_TXCH  = 0x44,	/* Transmit Channel Info      */
-	PAS_DMA_CAP_RXCH  = 0x48,	/* Transmit Channel Info      */
-	PAS_DMA_CAP_IFI	  = 0x4c,	/* Interface Info	      */
-	PAS_DMA_COM_TXCMD = 0x100,	/* Transmit Command Register  */
-	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
-	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
-	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
-	PAS_DMA_COM_CFG   = 0x114,	/* Common config reg	      */
-	PAS_DMA_TXF_SFLG0 = 0x140,	/* Set flags                  */
-	PAS_DMA_TXF_SFLG1 = 0x144,	/* Set flags                  */
-	PAS_DMA_TXF_CFLG0 = 0x148,	/* Set flags                  */
-	PAS_DMA_TXF_CFLG1 = 0x14c,	/* Set flags                  */
-};
-
-
-#define PAS_DMA_CAP_TXCH_TCHN_M	0x00ff0000 /* # of TX channels */
-#define PAS_DMA_CAP_TXCH_TCHN_S	16
-
-#define PAS_DMA_CAP_RXCH_RCHN_M	0x00ff0000 /* # of RX channels */
-#define PAS_DMA_CAP_RXCH_RCHN_S	16
-
-#define PAS_DMA_CAP_IFI_IOFF_M	0xff000000 /* Cfg reg for intf pointers */
-#define PAS_DMA_CAP_IFI_IOFF_S	24
-#define PAS_DMA_CAP_IFI_NIN_M	0x00ff0000 /* # of interfaces */
-#define PAS_DMA_CAP_IFI_NIN_S	16
-
-#define PAS_DMA_COM_TXCMD_EN	0x00000001 /* enable */
-#define PAS_DMA_COM_TXSTA_ACT	0x00000001 /* active */
-#define PAS_DMA_COM_RXCMD_EN	0x00000001 /* enable */
-#define PAS_DMA_COM_RXSTA_ACT	0x00000001 /* active */
-
-
-/* Per-interface and per-channel registers */
-#define _PAS_DMA_RXINT_STRIDE		0x20
-#define PAS_DMA_RXINT_RCMDSTA(i)	(0x200+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_RCMDSTA_EN	0x00000001
-#define    PAS_DMA_RXINT_RCMDSTA_ST	0x00000002
-#define    PAS_DMA_RXINT_RCMDSTA_MBT	0x00000008
-#define    PAS_DMA_RXINT_RCMDSTA_MDR	0x00000010
-#define    PAS_DMA_RXINT_RCMDSTA_MOO	0x00000020
-#define    PAS_DMA_RXINT_RCMDSTA_MBP	0x00000040
-#define    PAS_DMA_RXINT_RCMDSTA_BT	0x00000800
-#define    PAS_DMA_RXINT_RCMDSTA_DR	0x00001000
-#define    PAS_DMA_RXINT_RCMDSTA_OO	0x00002000
-#define    PAS_DMA_RXINT_RCMDSTA_BP	0x00004000
-#define    PAS_DMA_RXINT_RCMDSTA_TB	0x00008000
-#define    PAS_DMA_RXINT_RCMDSTA_ACT	0x00010000
-#define    PAS_DMA_RXINT_RCMDSTA_DROPS_M	0xfffe0000
-#define    PAS_DMA_RXINT_RCMDSTA_DROPS_S	17
-#define PAS_DMA_RXINT_CFG(i)		(0x204+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_CFG_RBP	0x80000000
-#define    PAS_DMA_RXINT_CFG_ITRR	0x40000000
-#define    PAS_DMA_RXINT_CFG_DHL_M	0x07000000
-#define    PAS_DMA_RXINT_CFG_DHL_S	24
-#define    PAS_DMA_RXINT_CFG_DHL(x)	(((x) << PAS_DMA_RXINT_CFG_DHL_S) & \
-					 PAS_DMA_RXINT_CFG_DHL_M)
-#define    PAS_DMA_RXINT_CFG_ITR	0x00400000
-#define    PAS_DMA_RXINT_CFG_LW		0x00200000
-#define    PAS_DMA_RXINT_CFG_L2		0x00100000
-#define    PAS_DMA_RXINT_CFG_HEN	0x00080000
-#define    PAS_DMA_RXINT_CFG_WIF	0x00000002
-#define    PAS_DMA_RXINT_CFG_WIL	0x00000001
-
-#define PAS_DMA_RXINT_INCR(i)		(0x210+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_INCR_INCR_M	0x0000ffff
-#define    PAS_DMA_RXINT_INCR_INCR_S	0
-#define    PAS_DMA_RXINT_INCR_INCR(x)	((x) & 0x0000ffff)
-#define PAS_DMA_RXINT_BASEL(i)		(0x218+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_BASEL_BRBL(x)	((x) & ~0x3f)
-#define PAS_DMA_RXINT_BASEU(i)		(0x21c+(i)*_PAS_DMA_RXINT_STRIDE)
-#define    PAS_DMA_RXINT_BASEU_BRBH(x)	((x) & 0xfff)
-#define    PAS_DMA_RXINT_BASEU_SIZ_M	0x3fff0000	/* # of cache lines worth of buffer ring */
-#define    PAS_DMA_RXINT_BASEU_SIZ_S	16		/* 0 = 16K */
-#define    PAS_DMA_RXINT_BASEU_SIZ(x)	(((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \
-					 PAS_DMA_RXINT_BASEU_SIZ_M)
-
-
-#define _PAS_DMA_TXCHAN_STRIDE	0x20    /* Size per channel		*/
-#define _PAS_DMA_TXCHAN_TCMDSTA	0x300	/* Command / Status		*/
-#define _PAS_DMA_TXCHAN_CFG	0x304	/* Configuration		*/
-#define _PAS_DMA_TXCHAN_DSCRBU	0x308	/* Descriptor BU Allocation	*/
-#define _PAS_DMA_TXCHAN_INCR	0x310	/* Descriptor increment		*/
-#define _PAS_DMA_TXCHAN_CNT	0x314	/* Descriptor count/offset	*/
-#define _PAS_DMA_TXCHAN_BASEL	0x318	/* Descriptor ring base (low)	*/
-#define _PAS_DMA_TXCHAN_BASEU	0x31c	/*			(high)	*/
-#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_TCMDSTA_EN	0x00000001	/* Enabled */
-#define    PAS_DMA_TXCHAN_TCMDSTA_ST	0x00000002	/* Stop interface */
-#define    PAS_DMA_TXCHAN_TCMDSTA_ACT	0x00010000	/* Active */
-#define    PAS_DMA_TXCHAN_TCMDSTA_SZ	0x00000800
-#define    PAS_DMA_TXCHAN_TCMDSTA_DB	0x00000400
-#define    PAS_DMA_TXCHAN_TCMDSTA_DE	0x00000200
-#define    PAS_DMA_TXCHAN_TCMDSTA_DA	0x00000100
-#define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_CFG_TY_IFACE	0x00000000	/* Type = interface */
-#define    PAS_DMA_TXCHAN_CFG_TY_COPY	0x00000001	/* Type = copy only */
-#define    PAS_DMA_TXCHAN_CFG_TY_FUNC	0x00000002	/* Type = function */
-#define    PAS_DMA_TXCHAN_CFG_TY_XOR	0x00000003	/* Type = xor only */
-#define    PAS_DMA_TXCHAN_CFG_TATTR_M	0x0000003c
-#define    PAS_DMA_TXCHAN_CFG_TATTR_S	2
-#define    PAS_DMA_TXCHAN_CFG_TATTR(x)	(((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
-					 PAS_DMA_TXCHAN_CFG_TATTR_M)
-#define    PAS_DMA_TXCHAN_CFG_LPDQ	0x00000800
-#define    PAS_DMA_TXCHAN_CFG_LPSQ	0x00000400
-#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000003c0
-#define    PAS_DMA_TXCHAN_CFG_WT_S	6
-#define    PAS_DMA_TXCHAN_CFG_WT(x)	(((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
-					 PAS_DMA_TXCHAN_CFG_WT_M)
-#define    PAS_DMA_TXCHAN_CFG_TRD	0x00010000	/* translate data */
-#define    PAS_DMA_TXCHAN_CFG_TRR	0x00008000	/* translate rings */
-#define    PAS_DMA_TXCHAN_CFG_UP	0x00004000	/* update tx descr when sent */
-#define    PAS_DMA_TXCHAN_CFG_CL	0x00002000	/* Clean last line */
-#define    PAS_DMA_TXCHAN_CFG_CF	0x00001000	/* Clean first line */
-#define PAS_DMA_TXCHAN_INCR(c)    (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define PAS_DMA_TXCHAN_BASEL(c)   (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_BASEL_BRBL_M	0xffffffc0
-#define    PAS_DMA_TXCHAN_BASEL_BRBL_S	0
-#define    PAS_DMA_TXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \
-					 PAS_DMA_TXCHAN_BASEL_BRBL_M)
-#define PAS_DMA_TXCHAN_BASEU(c)   (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE)
-#define    PAS_DMA_TXCHAN_BASEU_BRBH_M	0x00000fff
-#define    PAS_DMA_TXCHAN_BASEU_BRBH_S	0
-#define    PAS_DMA_TXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \
-					 PAS_DMA_TXCHAN_BASEU_BRBH_M)
-/* # of cache lines worth of buffer ring */
-#define    PAS_DMA_TXCHAN_BASEU_SIZ_M	0x3fff0000
-#define    PAS_DMA_TXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
-#define    PAS_DMA_TXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \
-					 PAS_DMA_TXCHAN_BASEU_SIZ_M)
-
-#define _PAS_DMA_RXCHAN_STRIDE	0x20    /* Size per channel		*/
-#define _PAS_DMA_RXCHAN_CCMDSTA	0x800	/* Command / Status		*/
-#define _PAS_DMA_RXCHAN_CFG	0x804	/* Configuration		*/
-#define _PAS_DMA_RXCHAN_INCR	0x810	/* Descriptor increment		*/
-#define _PAS_DMA_RXCHAN_CNT	0x814	/* Descriptor count/offset	*/
-#define _PAS_DMA_RXCHAN_BASEL	0x818	/* Descriptor ring base (low)	*/
-#define _PAS_DMA_RXCHAN_BASEU	0x81c	/*			(high)	*/
-#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_CCMDSTA_EN	0x00000001	/* Enabled */
-#define    PAS_DMA_RXCHAN_CCMDSTA_ST	0x00000002	/* Stop interface */
-#define    PAS_DMA_RXCHAN_CCMDSTA_ACT	0x00010000	/* Active */
-#define    PAS_DMA_RXCHAN_CCMDSTA_DU	0x00020000
-#define    PAS_DMA_RXCHAN_CCMDSTA_OD	0x00002000
-#define    PAS_DMA_RXCHAN_CCMDSTA_FD	0x00001000
-#define    PAS_DMA_RXCHAN_CCMDSTA_DT	0x00000800
-#define PAS_DMA_RXCHAN_CFG(c)     (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_CFG_CTR	0x00000400
-#define    PAS_DMA_RXCHAN_CFG_HBU_M	0x00000380
-#define    PAS_DMA_RXCHAN_CFG_HBU_S	7
-#define    PAS_DMA_RXCHAN_CFG_HBU(x)	(((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \
-					 PAS_DMA_RXCHAN_CFG_HBU_M)
-#define PAS_DMA_RXCHAN_INCR(c)    (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define PAS_DMA_RXCHAN_BASEL(c)   (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_BASEL_BRBL_M	0xffffffc0
-#define    PAS_DMA_RXCHAN_BASEL_BRBL_S	0
-#define    PAS_DMA_RXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \
-					 PAS_DMA_RXCHAN_BASEL_BRBL_M)
-#define PAS_DMA_RXCHAN_BASEU(c)   (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE)
-#define    PAS_DMA_RXCHAN_BASEU_BRBH_M	0x00000fff
-#define    PAS_DMA_RXCHAN_BASEU_BRBH_S	0
-#define    PAS_DMA_RXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \
-					 PAS_DMA_RXCHAN_BASEU_BRBH_M)
-/* # of cache lines worth of buffer ring */
-#define    PAS_DMA_RXCHAN_BASEU_SIZ_M	0x3fff0000
-#define    PAS_DMA_RXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
-#define    PAS_DMA_RXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \
-					 PAS_DMA_RXCHAN_BASEU_SIZ_M)
-
-#define    PAS_STATUS_PCNT_M		0x000000000000ffffull
-#define    PAS_STATUS_PCNT_S		0
-#define    PAS_STATUS_DCNT_M		0x00000000ffff0000ull
-#define    PAS_STATUS_DCNT_S		16
-#define    PAS_STATUS_BPCNT_M		0x0000ffff00000000ull
-#define    PAS_STATUS_BPCNT_S		32
-#define    PAS_STATUS_CAUSE_M		0xf000000000000000ull
-#define    PAS_STATUS_TIMER		0x1000000000000000ull
-#define    PAS_STATUS_ERROR		0x2000000000000000ull
-#define    PAS_STATUS_SOFT		0x4000000000000000ull
-#define    PAS_STATUS_INT		0x8000000000000000ull
-
-#define PAS_IOB_COM_PKTHDRCNT		0x120
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M	0x0fff0000
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S	16
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M	0x00000fff
-#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S	0
-
-#define PAS_IOB_DMA_RXCH_CFG(i)		(0x1100 + (i)*4)
-#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_M		0x00000fff
-#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_S		0
-#define    PAS_IOB_DMA_RXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \
-						 PAS_IOB_DMA_RXCH_CFG_CNTTH_M)
-#define PAS_IOB_DMA_TXCH_CFG(i)		(0x1200 + (i)*4)
-#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_M		0x00000fff
-#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_S		0
-#define    PAS_IOB_DMA_TXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \
-						 PAS_IOB_DMA_TXCH_CFG_CNTTH_M)
-#define PAS_IOB_DMA_RXCH_STAT(i)	(0x1300 + (i)*4)
-#define    PAS_IOB_DMA_RXCH_STAT_INTGEN	0x00001000
-#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_M	0x00000fff
-#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_S	0
-#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\
-						 PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
-#define PAS_IOB_DMA_TXCH_STAT(i)	(0x1400 + (i)*4)
-#define    PAS_IOB_DMA_TXCH_STAT_INTGEN	0x00001000
-#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_M	0x00000fff
-#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_S	0
-#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\
-						 PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
-#define PAS_IOB_DMA_RXCH_RESET(i)	(0x1500 + (i)*4)
-#define    PAS_IOB_DMA_RXCH_RESET_PCNT_M	0xffff0000
-#define    PAS_IOB_DMA_RXCH_RESET_PCNT_S	16
-#define    PAS_IOB_DMA_RXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
-						 PAS_IOB_DMA_RXCH_RESET_PCNT_M)
-#define    PAS_IOB_DMA_RXCH_RESET_PCNTRST	0x00000020
-#define    PAS_IOB_DMA_RXCH_RESET_DCNTRST	0x00000010
-#define    PAS_IOB_DMA_RXCH_RESET_TINTC		0x00000008
-#define    PAS_IOB_DMA_RXCH_RESET_DINTC		0x00000004
-#define    PAS_IOB_DMA_RXCH_RESET_SINTC		0x00000002
-#define    PAS_IOB_DMA_RXCH_RESET_PINTC		0x00000001
-#define PAS_IOB_DMA_TXCH_RESET(i)	(0x1600 + (i)*4)
-#define    PAS_IOB_DMA_TXCH_RESET_PCNT_M	0xffff0000
-#define    PAS_IOB_DMA_TXCH_RESET_PCNT_S	16
-#define    PAS_IOB_DMA_TXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
-						 PAS_IOB_DMA_TXCH_RESET_PCNT_M)
-#define    PAS_IOB_DMA_TXCH_RESET_PCNTRST	0x00000020
-#define    PAS_IOB_DMA_TXCH_RESET_DCNTRST	0x00000010
-#define    PAS_IOB_DMA_TXCH_RESET_TINTC		0x00000008
-#define    PAS_IOB_DMA_TXCH_RESET_DINTC		0x00000004
-#define    PAS_IOB_DMA_TXCH_RESET_SINTC		0x00000002
-#define    PAS_IOB_DMA_TXCH_RESET_PINTC		0x00000001
-
-#define PAS_IOB_DMA_COM_TIMEOUTCFG		0x1700
-#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M	0x00ffffff
-#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S	0
-#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x)	(((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \
-						 PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M)
-
-/* Transmit descriptor fields */
-#define	XCT_MACTX_T		0x8000000000000000ull
-#define	XCT_MACTX_ST		0x4000000000000000ull
-#define XCT_MACTX_NORES		0x0000000000000000ull
-#define XCT_MACTX_8BRES		0x1000000000000000ull
-#define XCT_MACTX_24BRES	0x2000000000000000ull
-#define XCT_MACTX_40BRES	0x3000000000000000ull
-#define XCT_MACTX_I		0x0800000000000000ull
-#define XCT_MACTX_O		0x0400000000000000ull
-#define XCT_MACTX_E		0x0200000000000000ull
-#define XCT_MACTX_VLAN_M	0x0180000000000000ull
-#define XCT_MACTX_VLAN_NOP	0x0000000000000000ull
-#define XCT_MACTX_VLAN_REMOVE	0x0080000000000000ull
-#define XCT_MACTX_VLAN_INSERT   0x0100000000000000ull
-#define XCT_MACTX_VLAN_REPLACE  0x0180000000000000ull
-#define XCT_MACTX_CRC_M		0x0060000000000000ull
-#define XCT_MACTX_CRC_NOP	0x0000000000000000ull
-#define XCT_MACTX_CRC_INSERT	0x0020000000000000ull
-#define XCT_MACTX_CRC_PAD	0x0040000000000000ull
-#define XCT_MACTX_CRC_REPLACE	0x0060000000000000ull
-#define XCT_MACTX_SS		0x0010000000000000ull
-#define XCT_MACTX_LLEN_M	0x00007fff00000000ull
-#define XCT_MACTX_LLEN_S	32ull
-#define XCT_MACTX_LLEN(x)	((((long)(x)) << XCT_MACTX_LLEN_S) & \
-				 XCT_MACTX_LLEN_M)
-#define XCT_MACTX_IPH_M		0x00000000f8000000ull
-#define XCT_MACTX_IPH_S		27ull
-#define XCT_MACTX_IPH(x)	((((long)(x)) << XCT_MACTX_IPH_S) & \
-				 XCT_MACTX_IPH_M)
-#define XCT_MACTX_IPO_M		0x0000000007c00000ull
-#define XCT_MACTX_IPO_S		22ull
-#define XCT_MACTX_IPO(x)	((((long)(x)) << XCT_MACTX_IPO_S) & \
-				 XCT_MACTX_IPO_M)
-#define XCT_MACTX_CSUM_M	0x0000000000000060ull
-#define XCT_MACTX_CSUM_NOP	0x0000000000000000ull
-#define XCT_MACTX_CSUM_TCP	0x0000000000000040ull
-#define XCT_MACTX_CSUM_UDP	0x0000000000000060ull
-#define XCT_MACTX_V6		0x0000000000000010ull
-#define XCT_MACTX_C		0x0000000000000004ull
-#define XCT_MACTX_AL2		0x0000000000000002ull
-
-/* Receive descriptor fields */
-#define	XCT_MACRX_T		0x8000000000000000ull
-#define	XCT_MACRX_ST		0x4000000000000000ull
-#define XCT_MACRX_RR_M		0x3000000000000000ull
-#define XCT_MACRX_RR_NORES	0x0000000000000000ull
-#define XCT_MACRX_RR_8BRES	0x1000000000000000ull
-#define XCT_MACRX_O		0x0400000000000000ull
-#define XCT_MACRX_E		0x0200000000000000ull
-#define XCT_MACRX_FF		0x0100000000000000ull
-#define XCT_MACRX_PF		0x0080000000000000ull
-#define XCT_MACRX_OB		0x0040000000000000ull
-#define XCT_MACRX_OD		0x0020000000000000ull
-#define XCT_MACRX_FS		0x0010000000000000ull
-#define XCT_MACRX_NB_M		0x000fc00000000000ull
-#define XCT_MACRX_NB_S		46ULL
-#define XCT_MACRX_NB(x)		((((long)(x)) << XCT_MACRX_NB_S) & \
-				 XCT_MACRX_NB_M)
-#define XCT_MACRX_LLEN_M	0x00003fff00000000ull
-#define XCT_MACRX_LLEN_S	32ULL
-#define XCT_MACRX_LLEN(x)	((((long)(x)) << XCT_MACRX_LLEN_S) & \
-				 XCT_MACRX_LLEN_M)
-#define XCT_MACRX_CRC		0x0000000080000000ull
-#define XCT_MACRX_LEN_M		0x0000000060000000ull
-#define XCT_MACRX_LEN_TOOSHORT	0x0000000020000000ull
-#define XCT_MACRX_LEN_BELOWMIN	0x0000000040000000ull
-#define XCT_MACRX_LEN_TRUNC	0x0000000060000000ull
-#define XCT_MACRX_CAST_M	0x0000000018000000ull
-#define XCT_MACRX_CAST_UNI	0x0000000000000000ull
-#define XCT_MACRX_CAST_MULTI	0x0000000008000000ull
-#define XCT_MACRX_CAST_BROAD	0x0000000010000000ull
-#define XCT_MACRX_CAST_PAUSE	0x0000000018000000ull
-#define XCT_MACRX_VLC_M		0x0000000006000000ull
-#define XCT_MACRX_FM		0x0000000001000000ull
-#define XCT_MACRX_HTY_M		0x0000000000c00000ull
-#define XCT_MACRX_HTY_IPV4_OK	0x0000000000000000ull
-#define XCT_MACRX_HTY_IPV6 	0x0000000000400000ull
-#define XCT_MACRX_HTY_IPV4_BAD	0x0000000000800000ull
-#define XCT_MACRX_HTY_NONIP	0x0000000000c00000ull
-#define XCT_MACRX_IPP_M		0x00000000003f0000ull
-#define XCT_MACRX_IPP_S		16
-#define XCT_MACRX_CSUM_M	0x000000000000ffffull
-#define XCT_MACRX_CSUM_S	0
-
-#define XCT_PTR_T		0x8000000000000000ull
-#define XCT_PTR_LEN_M		0x7ffff00000000000ull
-#define XCT_PTR_LEN_S		44
-#define XCT_PTR_LEN(x)		((((long)(x)) << XCT_PTR_LEN_S) & \
-				 XCT_PTR_LEN_M)
-#define XCT_PTR_ADDR_M		0x00000fffffffffffull
-#define XCT_PTR_ADDR_S		0
-#define XCT_PTR_ADDR(x)		((((long)(x)) << XCT_PTR_ADDR_S) & \
-				 XCT_PTR_ADDR_M)
-
-/* Receive interface 8byte result fields */
-#define XCT_RXRES_8B_L4O_M	0xff00000000000000ull
-#define XCT_RXRES_8B_L4O_S	56
-#define XCT_RXRES_8B_RULE_M	0x00ffff0000000000ull
-#define XCT_RXRES_8B_RULE_S	40
-#define XCT_RXRES_8B_EVAL_M	0x000000ffff000000ull
-#define XCT_RXRES_8B_EVAL_S	24
-#define XCT_RXRES_8B_HTYPE_M	0x0000000000f00000ull
-#define XCT_RXRES_8B_HASH_M	0x00000000000fffffull
-#define XCT_RXRES_8B_HASH_S	0
-
-/* Receive interface buffer fields */
-#define XCT_RXB_LEN_M		0x0ffff00000000000ull
-#define XCT_RXB_LEN_S		44
-#define XCT_RXB_LEN(x)		((((long)(x)) << XCT_RXB_LEN_S) & \
-				 XCT_RXB_LEN_M)
-#define XCT_RXB_ADDR_M		0x00000fffffffffffull
-#define XCT_RXB_ADDR_S		0
-#define XCT_RXB_ADDR(x)		((((long)(x)) << XCT_RXB_ADDR_S) & \
-				 XCT_RXB_ADDR_M)
-
-/* Copy descriptor fields */
-#define XCT_COPY_T		0x8000000000000000ull
-#define XCT_COPY_ST		0x4000000000000000ull
-#define XCT_COPY_RR_M		0x3000000000000000ull
-#define XCT_COPY_RR_NORES	0x0000000000000000ull
-#define XCT_COPY_RR_8BRES	0x1000000000000000ull
-#define XCT_COPY_RR_24BRES	0x2000000000000000ull
-#define XCT_COPY_RR_40BRES	0x3000000000000000ull
-#define XCT_COPY_I		0x0800000000000000ull
-#define XCT_COPY_O		0x0400000000000000ull
-#define XCT_COPY_E		0x0200000000000000ull
-#define XCT_COPY_STY_ZERO	0x01c0000000000000ull
-#define XCT_COPY_DTY_PREF	0x0038000000000000ull
-#define XCT_COPY_LLEN_M		0x0007ffff00000000ull
-#define XCT_COPY_LLEN_S		32
-#define XCT_COPY_LLEN(x)	((((long)(x)) << XCT_COPY_LLEN_S) & \
-				 XCT_COPY_LLEN_M)
-#define XCT_COPY_SE		0x0000000000000001ull
-
-/* Function descriptor fields */
-#define XCT_FUN_T		0x8000000000000000ull
-#define XCT_FUN_ST		0x4000000000000000ull
-#define XCT_FUN_RR_M		0x3000000000000000ull
-#define XCT_FUN_RR_NORES	0x0000000000000000ull
-#define XCT_FUN_RR_8BRES	0x1000000000000000ull
-#define XCT_FUN_RR_24BRES	0x2000000000000000ull
-#define XCT_FUN_RR_40BRES	0x3000000000000000ull
-#define XCT_FUN_I		0x0800000000000000ull
-#define XCT_FUN_O		0x0400000000000000ull
-#define XCT_FUN_E		0x0200000000000000ull
-#define XCT_FUN_FUN_M		0x01c0000000000000ull
-#define XCT_FUN_FUN_S		54
-#define XCT_FUN_FUN(x)		((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
-#define XCT_FUN_CRM_M		0x0038000000000000ull
-#define XCT_FUN_CRM_NOP		0x0000000000000000ull
-#define XCT_FUN_CRM_SIG		0x0008000000000000ull
-#define XCT_FUN_LLEN_M		0x0007ffff00000000ull
-#define XCT_FUN_LLEN_S		32
-#define XCT_FUN_LLEN(x)		((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
-#define XCT_FUN_SHL_M		0x00000000f8000000ull
-#define XCT_FUN_SHL_S		27
-#define XCT_FUN_SHL(x)		((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
-#define XCT_FUN_CHL_M		0x0000000007c00000ull
-#define XCT_FUN_HSZ_M		0x00000000003c0000ull
-#define XCT_FUN_ALG_M		0x0000000000038000ull
-#define XCT_FUN_HP		0x0000000000004000ull
-#define XCT_FUN_BCM_M		0x0000000000003800ull
-#define XCT_FUN_BCP_M		0x0000000000000600ull
-#define XCT_FUN_SIG_M		0x00000000000001f0ull
-#define XCT_FUN_SIG_TCP4	0x0000000000000140ull
-#define XCT_FUN_SIG_TCP6	0x0000000000000150ull
-#define XCT_FUN_SIG_UDP4	0x0000000000000160ull
-#define XCT_FUN_SIG_UDP6	0x0000000000000170ull
-#define XCT_FUN_A		0x0000000000000008ull
-#define XCT_FUN_C		0x0000000000000004ull
-#define XCT_FUN_AL2		0x0000000000000002ull
-#define XCT_FUN_SE		0x0000000000000001ull
-
-/* Function descriptor 8byte result fields */
-#define XCT_FUNRES_8B_CS_M	0x0000ffff00000000ull
-#define XCT_FUNRES_8B_CS_S	32
-#define XCT_FUNRES_8B_CRC_M	0x00000000ffffffffull
-#define XCT_FUNRES_8B_CRC_S	0
-
-/* Control descriptor fields */
-#define CTRL_CMD_T		0x8000000000000000ull
-#define CTRL_CMD_META_EVT	0x2000000000000000ull
-#define CTRL_CMD_O		0x0400000000000000ull
-#define CTRL_CMD_ETYPE_M	0x0038000000000000ull
-#define CTRL_CMD_ETYPE_EXT	0x0000000000000000ull
-#define CTRL_CMD_ETYPE_WSET	0x0020000000000000ull
-#define CTRL_CMD_ETYPE_WCLR	0x0028000000000000ull
-#define CTRL_CMD_ETYPE_SET	0x0030000000000000ull
-#define CTRL_CMD_ETYPE_CLR	0x0038000000000000ull
-#define CTRL_CMD_REG_M		0x000000000000007full
-#define CTRL_CMD_REG_S		0
-#define CTRL_CMD_REG(x)		((((long)(x)) << CTRL_CMD_REG_S) & \
-				 CTRL_CMD_REG_M)
-
-
-
-/* Prototypes for the shared DMA functions in the platform code. */
-
-/* DMA TX Channel type. Right now only limitations used are event types 0/1,
- * for event-triggered DMA transactions.
- */
-
-enum pasemi_dmachan_type {
-	RXCHAN = 0,		/* Any RX chan */
-	TXCHAN = 1,		/* Any TX chan */
-	TXCHAN_EVT0 = 0x1001,	/* TX chan in event class 0 (chan 0-9) */
-	TXCHAN_EVT1 = 0x2001,	/* TX chan in event class 1 (chan 10-19) */
-};
-
-struct pasemi_dmachan {
-	int		 chno;		/* Channel number */
-	enum pasemi_dmachan_type chan_type;	/* TX / RX */
-	u64		*status;	/* Ptr to cacheable status */
-	int		 irq;		/* IRQ used by channel */
-	unsigned int	 ring_size;	/* size of allocated ring */
-	dma_addr_t	 ring_dma;	/* DMA address for ring */
-	u64		*ring_virt;	/* Virt address for ring */
-	void		*priv;		/* Ptr to start of client struct */
-};
-
-/* Read/write the different registers in the I/O Bridge, Ethernet
- * and DMA Controller
- */
-extern unsigned int pasemi_read_iob_reg(unsigned int reg);
-extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val);
-
-extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg);
-extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val);
-
-extern unsigned int pasemi_read_dma_reg(unsigned int reg);
-extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val);
-
-/* Channel management routines */
-
-extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type,
-				   int total_size, int offset);
-extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan);
-
-extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan,
-				  const u32 cmdsta);
-extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan);
-
-/* Common routines to allocate rings and buffers */
-
-extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size);
-extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan);
-
-extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size,
-				  dma_addr_t *handle);
-extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
-				dma_addr_t *handle);
-
-/* Routines to allocate flags (events) for channel syncronization */
-extern int  pasemi_dma_alloc_flag(void);
-extern void pasemi_dma_free_flag(int flag);
-extern void pasemi_dma_set_flag(int flag);
-extern void pasemi_dma_clear_flag(int flag);
-
-/* Routines to allocate function engines */
-extern int  pasemi_dma_alloc_fun(void);
-extern void pasemi_dma_free_fun(int fun);
-
-/* Initialize the library, must be called before any other functions */
-extern int pasemi_dma_init(void);
-
-#endif /* ASM_PASEMI_DMA_H */
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
deleted file mode 100644
index ae2ea803a0f2..000000000000
--- a/include/asm-powerpc/pci-bridge.h
+++ /dev/null
@@ -1,302 +0,0 @@
-#ifndef _ASM_POWERPC_PCI_BRIDGE_H
-#define _ASM_POWERPC_PCI_BRIDGE_H
-#ifdef __KERNEL__
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/pci.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-
-struct device_node;
-
-extern unsigned int ppc_pci_flags;
-enum {
-	/* Force re-assigning all resources (ignore firmware
-	 * setup completely)
-	 */
-	PPC_PCI_REASSIGN_ALL_RSRC	= 0x00000001,
-
-	/* Re-assign all bus numbers */
-	PPC_PCI_REASSIGN_ALL_BUS	= 0x00000002,
-
-	/* Do not try to assign, just use existing setup */
-	PPC_PCI_PROBE_ONLY		= 0x00000004,
-
-	/* Don't bother with ISA alignment unless the bridge has
-	 * ISA forwarding enabled
-	 */
-	PPC_PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
-
-	/* Enable domain numbers in /proc */
-	PPC_PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
-	/* ... except for domain 0 */
-	PPC_PCI_COMPAT_DOMAIN_0		= 0x00000020,
-};
-
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
-	struct pci_bus *bus;
-	char is_dynamic;
-#ifdef CONFIG_PPC64
-	int node;
-#endif
-	struct device_node *dn;
-	struct list_head list_node;
-	struct device *parent;
-
-	int first_busno;
-	int last_busno;
-#ifndef CONFIG_PPC64
-	int self_busno;
-#endif
-
-	void __iomem *io_base_virt;
-#ifdef CONFIG_PPC64
-	void *io_base_alloc;
-#endif
-	resource_size_t io_base_phys;
-#ifndef CONFIG_PPC64
-	resource_size_t pci_io_size;
-#endif
-
-	/* Some machines (PReP) have a non 1:1 mapping of
-	 * the PCI memory space in the CPU bus space
-	 */
-	resource_size_t pci_mem_offset;
-#ifdef CONFIG_PPC64
-	unsigned long pci_io_size;
-#endif
-
-	struct pci_ops *ops;
-	unsigned int __iomem *cfg_addr;
-	void __iomem *cfg_data;
-
-#ifndef CONFIG_PPC64
-	/*
-	 * Used for variants of PCI indirect handling and possible quirks:
-	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
-	 *  EXT_REG - provides access to PCI-e extended registers
-	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
-	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
-	 *   to determine which bus number to match on when generating type0
-	 *   config cycles
-	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
-	 *   hanging if we don't have link and try to do config cycles to
-	 *   anything but the PHB.  Only allow talking to the PHB if this is
-	 *   set.
-	 *  BIG_ENDIAN - cfg_addr is a big endian register
-	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
-	 *   the PLB4.  Effectively disable MRM commands by setting this.
-	 */
-#define PPC_INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
-#define PPC_INDIRECT_TYPE_EXT_REG		0x00000002
-#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
-#define PPC_INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
-#define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
-#define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
-	u32 indirect_type;
-#endif	/* !CONFIG_PPC64 */
-	/* Currently, we limit ourselves to 1 IO range and 3 mem
-	 * ranges since the common pci_bus structure can't handle more
-	 */
-	struct resource	io_resource;
-	struct resource mem_resources[3];
-	int global_number;		/* PCI domain number */
-#ifdef CONFIG_PPC64
-	unsigned long buid;
-	unsigned long dma_window_base_cur;
-	unsigned long dma_window_size;
-
-	void *private_data;
-#endif	/* CONFIG_PPC64 */
-};
-
-#ifndef CONFIG_PPC64
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-	/* No specific ISA handling on ppc32 at this stage, it
-	 * all goes through PCI
-	 */
-	return 0;
-}
-
-/* These are used for config access before all the PCI probing
-   has been done. */
-extern int early_read_config_byte(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u8 *val);
-extern int early_read_config_word(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u16 *val);
-extern int early_read_config_dword(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u32 *val);
-extern int early_write_config_byte(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u8 val);
-extern int early_write_config_word(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u16 val);
-extern int early_write_config_dword(struct pci_controller *hose, int bus,
-			int dev_fn, int where, u32 val);
-
-extern int early_find_capability(struct pci_controller *hose, int bus,
-				 int dev_fn, int cap);
-
-extern void setup_indirect_pci(struct pci_controller* hose,
-			       resource_size_t cfg_addr,
-			       resource_size_t cfg_data, u32 flags);
-extern void setup_grackle(struct pci_controller *hose);
-#else	/* CONFIG_PPC64 */
-
-/*
- * PCI stuff, for nodes representing PCI devices, pointed to
- * by device_node->data.
- */
-struct iommu_table;
-
-struct pci_dn {
-	int	busno;			/* pci bus number */
-	int	devfn;			/* pci device and function number */
-
-	struct  pci_controller *phb;	/* for pci devices */
-	struct	iommu_table *iommu_table;	/* for phb's or bridges */
-	struct	device_node *node;	/* back-pointer to the device_node */
-
-	int	pci_ext_config_space;	/* for pci devices */
-
-#ifdef CONFIG_EEH
-	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
-	int	class_code;		/* pci device class */
-	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
-	int	eeh_config_addr;
-	int	eeh_pe_config_addr; /* new-style partition endpoint address */
-	int	eeh_check_count;	/* # times driver ignored error */
-	int	eeh_freeze_count;	/* # times this device froze up. */
-	int	eeh_false_positives;	/* # times this device reported #ff's */
-	u32	config_space[16];	/* saved PCI config space */
-#endif
-};
-
-/* Get the pointer to a device_node's pci_dn */
-#define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
-
-extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
-
-/* Get a device_node from a pci_dev.  This code must be fast except
- * in the case where the sysdata is incorrect and needs to be fixed
- * up (this will only happen once).
- * In this case the sysdata will have been inherited from a PCI host
- * bridge or a PCI-PCI bridge further up the tree, so it will point
- * to a valid struct pci_dn, just not the one we want.
- */
-static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
-{
-	struct device_node *dn = dev->sysdata;
-	struct pci_dn *pdn = dn->data;
-
-	if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number)
-		return dn;	/* fast path.  sysdata is good */
-	return fetch_dev_dn(dev);
-}
-
-static inline int pci_device_from_OF_node(struct device_node *np,
-					  u8 *bus, u8 *devfn)
-{
-	if (!PCI_DN(np))
-		return -ENODEV;
-	*bus = PCI_DN(np)->busno;
-	*devfn = PCI_DN(np)->devfn;
-	return 0;
-}
-
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-	if (bus->self)
-		return pci_device_to_OF_node(bus->self);
-	else
-		return bus->sysdata; /* Must be root bus (PHB) */
-}
-
-/** Find the bus corresponding to the indicated device node */
-extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
-
-/** Remove all of the PCI devices under this bus */
-extern void pcibios_remove_pci_devices(struct pci_bus *bus);
-
-/** Discover new pci devices under this bus, and add them */
-extern void pcibios_add_pci_devices(struct pci_bus *bus);
-extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
-
-extern int pcibios_remove_root_bus(struct pci_controller *phb);
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-	struct device_node *busdn = bus->sysdata;
-
-	BUG_ON(busdn == NULL);
-	return PCI_DN(busdn)->phb;
-}
-
-
-extern void isa_bridge_find_early(struct pci_controller *hose);
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-	/* Check if address hits the reserved legacy IO range */
-	unsigned long ea = (unsigned long)address;
-	return ea >= ISA_IO_BASE && ea < ISA_IO_END;
-}
-
-extern int pcibios_unmap_io_space(struct pci_bus *bus);
-extern int pcibios_map_io_space(struct pci_bus *bus);
-
-/* Return values for ppc_md.pci_probe_mode function */
-#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
-#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
-#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
-
-#ifdef CONFIG_NUMA
-#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = (NODE))
-#else
-#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = -1)
-#endif
-
-#endif	/* CONFIG_PPC64 */
-
-/* Get the PCI host controller for an OF device */
-extern struct pci_controller *pci_find_hose_for_OF_device(
-			struct device_node* node);
-
-/* Fill up host controller resources from the OF node */
-extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			struct device_node *dev, int primary);
-
-/* Allocate & free a PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
-extern void pcibios_free_controller(struct pci_controller *phb);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-extern int pcibios_vaddr_is_ioport(void __iomem *address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	return (unsigned long)-1;
-}
-static inline int pcibios_vaddr_is_ioport(void __iomem *address)
-{
-	return 0;
-}
-#endif	/* CONFIG_PCI */
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_PCI_BRIDGE_H */
diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h
deleted file mode 100644
index a05a942b1c25..000000000000
--- a/include/asm-powerpc/pci.h
+++ /dev/null
@@ -1,228 +0,0 @@
-#ifndef __ASM_POWERPC_PCI_H
-#define __ASM_POWERPC_PCI_H
-#ifdef __KERNEL__
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/machdep.h>
-#include <asm/scatterlist.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#include <asm-generic/pci-dma-compat.h>
-
-#define PCIBIOS_MIN_IO		0x1000
-#define PCIBIOS_MIN_MEM		0x10000000
-
-struct pci_dev;
-
-/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
-#define IOBASE_BRIDGE_NUMBER	0
-#define IOBASE_MEMORY		1
-#define IOBASE_IO		2
-#define IOBASE_ISA_IO		3
-#define IOBASE_ISA_MEM		4
-
-/*
- * Set this to 1 if you want the kernel to re-assign all PCI
- * bus numbers (don't do that on ppc64 yet !)
- */
-#define pcibios_assign_all_busses()    	(ppc_pci_flags & \
-					 PPC_PCI_REASSIGN_ALL_BUS)
-#define pcibios_scan_all_fns(a, b)	0
-
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	if (ppc_md.pci_get_legacy_ide_irq)
-		return ppc_md.pci_get_legacy_ide_irq(dev, channel);
-	return channel ? 15 : 14;
-}
-
-#ifdef CONFIG_PPC64
-
-/*
- * We want to avoid touching the cacheline size or MWI bit.
- * pSeries firmware sets the cacheline size (which is not the cpu cacheline
- * size in all cases) and hardware treats MWI the same as memory write.
- */
-#define PCI_DISABLE_MWI
-
-#ifdef CONFIG_PCI
-extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
-extern struct dma_mapping_ops *get_pci_dma_ops(void);
-
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	unsigned long cacheline_size;
-	u8 byte;
-
-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
-	if (byte == 0)
-		cacheline_size = 1024;
-	else
-		cacheline_size = (int) byte * 4;
-
-	*strat = PCI_DMA_BURST_MULTIPLE;
-	*strategy_parameter = cacheline_size;
-}
-#else	/* CONFIG_PCI */
-#define set_pci_dma_ops(d)
-#define get_pci_dma_ops()	NULL
-#endif
-
-#else /* 32-bit */
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-#endif /* CONFIG_PPC64 */
-
-extern int pci_domain_nr(struct pci_bus *bus);
-
-/* Decide whether to display the domain number in /proc */
-extern int pci_proc_domain(struct pci_bus *bus);
-
-
-struct vm_area_struct;
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine);
-
-/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP	1
-
-#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
-/*
- * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
- * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
- * so on are not nops.
- * and thus...
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-#else /* 32-bit && coherent */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
-
-#ifdef CONFIG_PPC64
-
-/* The PCI address space does not equal the physical memory address
- * space (we have an IOMMU).  The IDE and SCSI device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(0)
-
-#else /* 32-bit */
-
-/* The PCI address space does equal the physical memory
- * address space (no IOMMU).  The IDE and SCSI device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS     (1)
-
-#endif /* CONFIG_PPC64 */
-
-extern void pcibios_resource_to_bus(struct pci_dev *dev,
-			struct pci_bus_region *region,
-			struct resource *res);
-
-extern void pcibios_bus_to_resource(struct pci_dev *dev,
-			struct resource *res,
-			struct pci_bus_region *region);
-
-static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
-			struct resource *res)
-{
-	struct resource *root = NULL;
-
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-
-	return root;
-}
-
-extern void pcibios_setup_new_device(struct pci_dev *dev);
-
-extern void pcibios_claim_one_bus(struct pci_bus *b);
-
-extern void pcibios_resource_survey(void);
-
-extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
-
-extern struct pci_dev *of_create_pci_dev(struct device_node *node,
-					struct pci_bus *bus, int devfn);
-
-extern void of_scan_pci_bridge(struct device_node *node,
-				struct pci_dev *dev);
-
-extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
-
-extern int pci_read_irq_line(struct pci_dev *dev);
-
-struct file;
-extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
-					 unsigned long pfn,
-					 unsigned long size,
-					 pgprot_t prot);
-
-#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
-				 const struct resource *rsrc,
-				 resource_size_t *start, resource_size_t *end);
-
-extern void pcibios_do_bus_setup(struct pci_bus *bus);
-extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
-
-#endif	/* __KERNEL__ */
-#endif /* __ASM_POWERPC_PCI_H */
diff --git a/include/asm-powerpc/percpu.h b/include/asm-powerpc/percpu.h
deleted file mode 100644
index f879252b7ea6..000000000000
--- a/include/asm-powerpc/percpu.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_POWERPC_PERCPU_H_
-#define _ASM_POWERPC_PERCPU_H_
-#ifdef __powerpc64__
-#include <linux/compiler.h>
-
-/*
- * Same as asm-generic/percpu.h, except that we store the per cpu offset
- * in the paca. Based on the x86-64 implementation.
- */
-
-#ifdef CONFIG_SMP
-
-#include <asm/paca.h>
-
-#define __per_cpu_offset(cpu) (paca[cpu].data_offset)
-#define __my_cpu_offset local_paca->data_offset
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-#endif /* CONFIG_SMP */
-#endif /* __powerpc64__ */
-
-#include <asm-generic/percpu.h>
-
-#endif /* _ASM_POWERPC_PERCPU_H_ */
diff --git a/include/asm-powerpc/pgalloc-32.h b/include/asm-powerpc/pgalloc-32.h
deleted file mode 100644
index 58c07147b3ea..000000000000
--- a/include/asm-powerpc/pgalloc-32.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _ASM_POWERPC_PGALLOC_32_H
-#define _ASM_POWERPC_PGALLOC_32_H
-
-#include <linux/threads.h>
-
-extern void __bad_pte(pmd_t *pmd);
-
-extern pgd_t *pgd_alloc(struct mm_struct *mm);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-/*
- * We don't have any real pmd's, and this code never triggers because
- * the pgd will always be present..
- */
-/* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
-#define pmd_free(mm, x) 		do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
-/* #define pgd_populate(mm, pmd, pte)      BUG() */
-
-#ifndef CONFIG_BOOKE
-#define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#else
-#define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#endif
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
-extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
-extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
-extern void pte_free(struct mm_struct *mm, pgtable_t pte);
-
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _ASM_POWERPC_PGALLOC_32_H */
diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h
deleted file mode 100644
index 68980990f62a..000000000000
--- a/include/asm-powerpc/pgalloc-64.h
+++ /dev/null
@@ -1,166 +0,0 @@
-#ifndef _ASM_POWERPC_PGALLOC_64_H
-#define _ASM_POWERPC_PGALLOC_64_H
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/cpumask.h>
-#include <linux/percpu.h>
-
-#ifndef CONFIG_PPC_SUBPAGE_PROT
-static inline void subpage_prot_free(pgd_t *pgd) {}
-#endif
-
-extern struct kmem_cache *pgtable_cache[];
-
-#define PGD_CACHE_NUM		0
-#define PUD_CACHE_NUM		1
-#define PMD_CACHE_NUM		1
-#define HUGEPTE_CACHE_NUM	2
-#define PTE_NONCACHE_NUM	3  /* from GFP rather than kmem_cache */
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	subpage_prot_free(pgd);
-	kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
-}
-
-#ifndef CONFIG_PPC_64K_PAGES
-
-#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, PUD)
-
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
-				GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pud_free(struct mm_struct *mm, pud_t *pud)
-{
-	kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
-}
-
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
-	pud_set(pud, (unsigned long)pmd);
-}
-
-#define pmd_populate(mm, pmd, pte_page) \
-	pmd_populate_kernel(mm, pmd, page_address(pte_page))
-#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-
-#else /* CONFIG_PPC_64K_PAGES */
-
-#define pud_populate(mm, pud, pmd)	pud_set(pud, (unsigned long)pmd)
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
-				       pte_t *pte)
-{
-	pmd_set(pmd, (unsigned long)pte);
-}
-
-#define pmd_populate(mm, pmd, pte_page) \
-	pmd_populate_kernel(mm, pmd, page_address(pte_page))
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#endif /* CONFIG_PPC_64K_PAGES */
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
-				GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-					  unsigned long address)
-{
-        return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
-					unsigned long address)
-{
-	struct page *page;
-	pte_t *pte;
-
-	pte = pte_alloc_one_kernel(mm, address);
-	if (!pte)
-		return NULL;
-	page = virt_to_page(pte);
-	pgtable_page_ctor(page);
-	return page;
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
-	pgtable_page_dtor(ptepage);
-	__free_page(ptepage);
-}
-
-#define PGF_CACHENUM_MASK	0x3
-
-typedef struct pgtable_free {
-	unsigned long val;
-} pgtable_free_t;
-
-static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
-						unsigned long mask)
-{
-	BUG_ON(cachenum > PGF_CACHENUM_MASK);
-
-	return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
-}
-
-static inline void pgtable_free(pgtable_free_t pgf)
-{
-	void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
-	int cachenum = pgf.val & PGF_CACHENUM_MASK;
-
-	if (cachenum == PTE_NONCACHE_NUM)
-		free_page((unsigned long)p);
-	else
-		kmem_cache_free(pgtable_cache[cachenum], p);
-}
-
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-
-#define __pte_free_tlb(tlb,ptepage)	\
-do { \
-	pgtable_page_dtor(ptepage); \
-	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-		PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
-} while (0)
-#define __pmd_free_tlb(tlb, pmd) 	\
-	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
-		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
-#ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud)	\
-	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
-		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
-#endif /* CONFIG_PPC_64K_PAGES */
-
-#define check_pgt_cache()	do { } while (0)
-
-#endif /* _ASM_POWERPC_PGALLOC_64_H */
diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h
deleted file mode 100644
index b4505ed0f0f2..000000000000
--- a/include/asm-powerpc/pgalloc.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_POWERPC_PGALLOC_H
-#define _ASM_POWERPC_PGALLOC_H
-#ifdef __KERNEL__
-
-#ifdef CONFIG_PPC64
-#include <asm/pgalloc-64.h>
-#else
-#include <asm/pgalloc-32.h>
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h
deleted file mode 100644
index fd2090dc1dce..000000000000
--- a/include/asm-powerpc/pgtable-4k.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_4K_H
-#define _ASM_POWERPC_PGTABLE_4K_H
-/*
- * Entries per page directory level.  The PTE level must use a 64b record
- * for each page table entry.  The PMD and PGD level use a 32b record for
- * each entry by assuming that each entry is page aligned.
- */
-#define PTE_INDEX_SIZE  9
-#define PMD_INDEX_SIZE  7
-#define PUD_INDEX_SIZE  7
-#define PGD_INDEX_SIZE  9
-
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
-#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
-#endif	/* __ASSEMBLY__ */
-
-#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PUD	(1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE	(1UL << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT	PMD_SHIFT
-
-/* PUD_SHIFT determines what a third-level page table entry can map */
-#define PUD_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
-#define PUD_SIZE	(1UL << PUD_SHIFT)
-#define PUD_MASK	(~(PUD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
-#define PGDIR_SHIFT	(PUD_SHIFT + PUD_INDEX_SIZE)
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-/* PTE bits */
-#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
-#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
-#define _PAGE_F_SECOND  _PAGE_SECONDARY
-#define _PAGE_F_GIX     _PAGE_GROUP_IX
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
-			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
-
-/* PAGE_MASK gives the right answer below, but only by accident */
-/* It should be preserving the high 48 bits and then specifically */
-/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
-                         _PAGE_HPTEFLAGS)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS		0
-/* Bits to mask out from a PUD to get to the PMD page */
-#define PUD_MASKED_BITS		0
-/* Bits to mask out from a PGD to get to the PUD page */
-#define PGD_MASKED_BITS		0
-
-/* shift to put page number into pte */
-#define PTE_RPN_SHIFT	(17)
-
-#ifdef STRICT_MM_TYPECHECKS
-#define __real_pte(e,p)		((real_pte_t){(e)})
-#define __rpte_to_pte(r)	((r).pte)
-#else
-#define __real_pte(e,p)		(e)
-#define __rpte_to_pte(r)	(__pte(r))
-#endif
-#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> 12)
-
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
-	do {							         \
-		index = 0;					         \
-		shift = mmu_psize_defs[psize].shift;		         \
-
-#define pte_iterate_hashed_end() } while(0)
-
-#ifdef CONFIG_PPC_HAS_HASH_64K
-#define pte_pagesize_index(mm, addr, pte)	get_slice_psize(mm, addr)
-#else
-#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
-#endif
-
-/*
- * 4-level page tables related bits
- */
-
-#define pgd_none(pgd)		(!pgd_val(pgd))
-#define pgd_bad(pgd)		(pgd_val(pgd) == 0)
-#define pgd_present(pgd)	(pgd_val(pgd) != 0)
-#define pgd_clear(pgdp)		(pgd_val(*(pgdp)) = 0)
-#define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
-#define pgd_page(pgd)		virt_to_page(pgd_page_vaddr(pgd))
-
-#define pud_offset(pgdp, addr)	\
-  (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
-    (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
-
-#define pud_ERROR(e) \
-	printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
-
-#define remap_4k_pfn(vma, addr, pfn, prot)	\
-	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
-#endif /* _ASM_POWERPC_PGTABLE_4K_H */
diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h
deleted file mode 100644
index c5007712473f..000000000000
--- a/include/asm-powerpc/pgtable-64k.h
+++ /dev/null
@@ -1,153 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_64K_H
-#define _ASM_POWERPC_PGTABLE_64K_H
-
-#include <asm-generic/pgtable-nopud.h>
-
-
-#define PTE_INDEX_SIZE  12
-#define PMD_INDEX_SIZE  12
-#define PUD_INDEX_SIZE	0
-#define PGD_INDEX_SIZE  4
-
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
-#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
-#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
-
-#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
-#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
-#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
-
-#ifdef CONFIG_PPC_SUBPAGE_PROT
-/*
- * For the sub-page protection option, we extend the PGD with one of
- * these.  Basically we have a 3-level tree, with the top level being
- * the protptrs array.  To optimize speed and memory consumption when
- * only addresses < 4GB are being protected, pointers to the first
- * four pages of sub-page protection words are stored in the low_prot
- * array.
- * Each page of sub-page protection words protects 1GB (4 bytes
- * protects 64k).  For the 3-level tree, each page of pointers then
- * protects 8TB.
- */
-struct subpage_prot_table {
-	unsigned long maxaddr;	/* only addresses < this are protected */
-	unsigned int **protptrs[2];
-	unsigned int *low_prot[4];
-};
-
-#undef PGD_TABLE_SIZE
-#define PGD_TABLE_SIZE		((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
-				 sizeof(struct subpage_prot_table))
-
-#define SBP_L1_BITS		(PAGE_SHIFT - 2)
-#define SBP_L2_BITS		(PAGE_SHIFT - 3)
-#define SBP_L1_COUNT		(1 << SBP_L1_BITS)
-#define SBP_L2_COUNT		(1 << SBP_L2_BITS)
-#define SBP_L2_SHIFT		(PAGE_SHIFT + SBP_L1_BITS)
-#define SBP_L3_SHIFT		(SBP_L2_SHIFT + SBP_L2_BITS)
-
-extern void subpage_prot_free(pgd_t *pgd);
-
-static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
-{
-	return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
-}
-#endif /* CONFIG_PPC_SUBPAGE_PROT */
-#endif	/* __ASSEMBLY__ */
-
-/* With 4k base page size, hugepage PTEs go at the PMD level */
-#define MIN_HUGEPTE_SHIFT	PAGE_SHIFT
-
-/* PMD_SHIFT determines what a second-level page table entry can map */
-#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
-#define PMD_SIZE	(1UL << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-/* Additional PTE bits (don't change without checking asm in hash_low.S) */
-#define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
-#define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
-#define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
-#define _PAGE_4K_PFN	0x20000000 /* PFN is for a single 4k page */
-
-/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
- * we set that to be the whole sub-bits mask. The C code will only
- * test this, so a multi-bit mask will work. For combo pages, this
- * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
- * all the sub bits. For real 64k pages, we now have the assembly set
- * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
- * that mask. This is fine as long as the HIDX bits are never set on
- * a PTE that isn't hashed, which is the case today.
- *
- * A little nit is for the huge page C code, which does the hashing
- * in C, we need to provide which bit to use.
- */
-#define _PAGE_HASHPTE	_PAGE_HPTE_SUB
-
-/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same asssembly will be used to insert 64K pages
- * wether the kernel has CONFIG_PPC_64K_PAGES or not
- */
-#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
-#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
-
-/* Shift to put page number into pte.
- *
- * That gives us a max RPN of 34 bits, which means a max of 50 bits
- * of addressable physical space, or 46 bits for the special 4k PFNs.
- */
-#define PTE_RPN_SHIFT	(30)
-#define PTE_RPN_MAX	(1UL << (64 - PTE_RPN_SHIFT))
-#define PTE_RPN_MASK	(~((1UL<<PTE_RPN_SHIFT)-1))
-
-/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
- * pgprot changes
- */
-#define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
-                         _PAGE_ACCESSED)
-
-/* Bits to mask out from a PMD to get to the PTE page */
-#define PMD_MASKED_BITS		0x1ff
-/* Bits to mask out from a PGD/PUD to get to the PMD page */
-#define PUD_MASKED_BITS		0x1ff
-
-/* Manipulate "rpte" values */
-#define __real_pte(e,p) 	((real_pte_t) { \
-	(e), pte_val(*((p) + PTRS_PER_PTE)) })
-#define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
-        (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
-#define __rpte_to_pte(r)	((r).pte)
-#define __rpte_sub_valid(rpte, index) \
-	(pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
-
-
-/* Trick: we set __end to va + 64k, which happens works for
- * a 16M page as well as we want only one iteration
- */
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)	    \
-        do {                                                                \
-                unsigned long __end = va + PAGE_SIZE;                       \
-                unsigned __split = (psize == MMU_PAGE_4K ||                 \
-				    psize == MMU_PAGE_64K_AP);              \
-                shift = mmu_psize_defs[psize].shift;                        \
-	        for (index = 0; va < __end; index++, va += (1 << shift)) {  \
-		        if (!__split || __rpte_sub_valid(rpte, index)) do { \
-
-#define pte_iterate_hashed_end() } while(0); } } while(0)
-
-#define pte_pagesize_index(mm, addr, pte)	\
-	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
-
-#define remap_4k_pfn(vma, addr, pfn, prot)				\
-	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,		\
-			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
-
-#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
deleted file mode 100644
index 73015f0139de..000000000000
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ /dev/null
@@ -1,790 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
-#define _ASM_POWERPC_PGTABLE_PPC32_H
-
-#include <asm-generic/pgtable-nopmd.h>
-
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-#include <linux/threads.h>
-#include <asm/io.h>			/* For sub-arch specific PPC_PIN_SIZE */
-
-extern unsigned long va_to_phys(unsigned long address);
-extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
-
-#ifdef CONFIG_44x
-extern int icache_44x_need_flush;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The PowerPC MMU uses a hash table containing PTEs, together with
- * a set of 16 segment registers (on 32-bit implementations), to define
- * the virtual to physical address mapping.
- *
- * We use the hash table as an extended TLB, i.e. a cache of currently
- * active mappings.  We maintain a two-level page table tree, much
- * like that used by the i386, for the sake of the Linux memory
- * management code.  Low-level assembler code in hashtable.S
- * (procedure hash_page) is responsible for extracting ptes from the
- * tree and putting them into the hash table when necessary, and
- * updating the accessed and modified bits in the page table tree.
- */
-
-/*
- * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
- * We also use the two level tables, but we can put the real bits in them
- * needed for the TLB and tablewalk.  These definitions require Mx_CTR.PPM = 0,
- * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1.  The level 2 descriptor has
- * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
- * based upon user/super access.  The TLB does not have accessed nor write
- * protect.  We assume that if the TLB get loaded with an entry it is
- * accessed, and overload the changed bit for write protect.  We use
- * two bits in the software pte that are supposed to be set to zero in
- * the TLB entry (24 and 25) for these indicators.  Although the level 1
- * descriptor contains the guarded and writethrough/copyback bits, we can
- * set these at the page level since they get copied from the Mx_TWC
- * register when the TLB entry is loaded.  We will use bit 27 for guard, since
- * that is where it exists in the MD_TWC, and bit 26 for writethrough.
- * These will get masked from the level 2 descriptor at TLB load time, and
- * copied to the MD_TWC before it gets loaded.
- * Large page sizes added.  We currently support two sizes, 4K and 8M.
- * This also allows a TLB hander optimization because we can directly
- * load the PMD into MD_TWC.  The 8M pages are only used for kernel
- * mapping of well known areas.  The PMD (PGD) entries contain control
- * flags in addition to the address, so care must be taken that the
- * software no longer assumes these are only pointers.
- */
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- */
-
-/*
- * The normal case is that PTEs are 32-bits and we have a 1-page
- * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
- *
- * For any >32-bit physical address platform, we can use the following
- * two level page table layout where the pgdir is 8KB and the MS 13 bits
- * are an index to the second level table.  The combined pgdir/pmd first
- * level has 2048 entries and the second level has 512 64-bit PTE entries.
- * -Matt
- */
-/* PGDIR_SHIFT determines what a top-level page table entry can map */
-#define PGDIR_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-/*
- * entries per page directory level: our page-table tree is two-level, so
- * we don't really have any PMD directory.
- */
-#ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_SHIFT)
-#define PGD_TABLE_SIZE	(sizeof(pgd_t) << (32 - PGDIR_SHIFT))
-#endif	/* __ASSEMBLY__ */
-
-#define PTRS_PER_PTE	(1 << PTE_SHIFT)
-#define PTRS_PER_PMD	1
-#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
-
-#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS	0
-
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
-		(unsigned long long)pte_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * We no longer map larger than phys RAM with the BATs so we don't have
- * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
- * about clashes between our early calls to ioremap() that start growing down
- * from ioremap_base being run into the VM area allocations (growing upwards
- * from VMALLOC_START).  For this reason we have ioremap_bot to check when
- * we actually run into our mappings setup in the early boot with the VM
- * system.  This really does become a problem for machines with good amounts
- * of RAM.  -- Cort
- */
-#define VMALLOC_OFFSET (0x1000000) /* 16M */
-#ifdef PPC_PIN_SIZE
-#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#else
-#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#endif
-#define VMALLOC_END	ioremap_bot
-
-/*
- * Bits in a linux-style PTE.  These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible.
- */
-
-#if defined(CONFIG_40x)
-
-/* There are several potential gotchas here.  The 40x hardware TLBLO
-   field looks like this:
-
-   0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
-   RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
-
-   Where possible we make the Linux PTE bits match up with this
-
-   - bits 20 and 21 must be cleared, because we use 4k pages (40x can
-     support down to 1k pages), this is done in the TLBMiss exception
-     handler.
-   - We use only zones 0 (for kernel pages) and 1 (for user pages)
-     of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
-     miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
-     zone.
-   - PRESENT *must* be in the bottom two bits because swap cache
-     entries use the top 30 bits.  Because 40x doesn't support SMP
-     anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
-     is cleared in the TLB miss handler before the TLB entry is loaded.
-   - All other bits of the PTE are loaded into TLBLO without
-     modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
-     software PTE bits.  We actually use use bits 21, 24, 25, and
-     30 respectively for the software bits: ACCESSED, DIRTY, RW, and
-     PRESENT.
-*/
-
-/* Definitions for 40x embedded chips. */
-#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
-#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
-#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
-#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
-#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
-#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
-#define	_PAGE_RW	0x040	/* software: Writes permitted */
-#define	_PAGE_DIRTY	0x080	/* software: dirty page */
-#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
-#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
-
-#define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
-#define _PMD_BAD	0x802
-#define _PMD_SIZE	0x0e0	/* size field, != 0 for large-page PMD entry */
-#define _PMD_SIZE_4M	0x0c0
-#define _PMD_SIZE_16M	0x0e0
-#define PMD_PAGE_SIZE(pmdval)	(1024 << (((pmdval) & _PMD_SIZE) >> 4))
-
-/* Until my rework is finished, 40x still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES	1
-
-#elif defined(CONFIG_44x)
-/*
- * Definitions for PPC440
- *
- * Because of the 3 word TLB entries to support 36-bit addressing,
- * the attribute are difficult to map in such a fashion that they
- * are easily loaded during exception processing.  I decided to
- * organize the entry so the ERPN is the only portion in the
- * upper word of the PTE and the attribute bits below are packed
- * in as sensibly as they can be in the area below a 4KB page size
- * oriented RPN.  This at least makes it easy to load the RPN and
- * ERPN fields in the TLB. -Matt
- *
- * Note that these bits preclude future use of a page size
- * less than 4KB.
- *
- *
- * PPC 440 core has following TLB attribute fields;
- *
- *   TLB1:
- *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- *   RPN.................................  -  -  -  -  -  - ERPN.......
- *
- *   TLB2:
- *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- *   -  -  -  -  -    - U0 U1 U2 U3 W  I  M  G  E   - UX UW UR SX SW SR
- *
- * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
- * TLB2 storage attibute fields. Those are:
- *
- *   TLB2:
- *   0...10    11   12   13   14   15   16...31
- *   no change WL1  IL1I IL1D IL2I IL2D no change
- *
- * There are some constrains and options, to decide mapping software bits
- * into TLB entry.
- *
- *   - PRESENT *must* be in the bottom three bits because swap cache
- *     entries use the top 29 bits for TLB2.
- *
- *   - FILE *must* be in the bottom three bits because swap cache
- *     entries use the top 29 bits for TLB2.
- *
- *   - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
- *     doesn't support SMP. So we can use this as software bit, like
- *     DIRTY.
- *
- * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
- * for memory protection related functions (see PTE structure in
- * include/asm-ppc/mmu.h).  The _PAGE_XXX definitions in this file map to the
- * above bits.  Note that the bit values are CPU specific, not architecture
- * specific.
- *
- * The kernel PTE entry holds an arch-dependent swp_entry structure under
- * certain situations. In other words, in such situations some portion of
- * the PTE bits are used as a swp_entry. In the PPC implementation, the
- * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
- * hold protection values. That means the three protection bits are
- * reserved for both PTE and SWAP entry at the most significant three
- * LSBs.
- *
- * There are three protection bits available for SWAP entry:
- *	_PAGE_PRESENT
- *	_PAGE_FILE
- *	_PAGE_HASHPTE (if HW has)
- *
- * So those three bits have to be inside of 0-2nd LSB of PTE.
- *
- */
-
-#define _PAGE_PRESENT	0x00000001		/* S: PTE valid */
-#define _PAGE_RW	0x00000002		/* S: Write permission */
-#define _PAGE_FILE	0x00000004		/* S: nonlinear file mapping */
-#define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
-#define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
-#define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
-#define _PAGE_USER	0x00000040		/* S: User page */
-#define _PAGE_ENDIAN	0x00000080		/* H: E bit */
-#define _PAGE_GUARDED	0x00000100		/* H: G bit */
-#define _PAGE_COHERENT	0x00000200		/* H: M bit */
-#define _PAGE_NO_CACHE	0x00000400		/* H: I bit */
-#define _PAGE_WRITETHRU	0x00000800		/* H: W bit */
-
-/* TODO: Add large page lowmem mapping support */
-#define _PMD_PRESENT	0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD	(~PAGE_MASK)
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK	0xffffffff00000000ULL
-
-
-#elif defined(CONFIG_FSL_BOOKE)
-/*
-   MMU Assist Register 3:
-
-   32 33 34 35 36  ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
-   RPN......................  0  0 U0 U1 U2 U3 UX SX UW SW UR SR
-
-   - PRESENT *must* be in the bottom three bits because swap cache
-     entries use the top 29 bits.
-
-   - FILE *must* be in the bottom three bits because swap cache
-     entries use the top 29 bits.
-*/
-
-/* Definitions for FSL Book-E Cores */
-#define _PAGE_PRESENT	0x00001	/* S: PTE contains a translation */
-#define _PAGE_USER	0x00002	/* S: User page (maps to UR) */
-#define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
-#define _PAGE_ACCESSED	0x00004	/* S: Page referenced */
-#define _PAGE_HWWRITE	0x00008	/* H: Dirty & RW, set in exception */
-#define _PAGE_RW	0x00010	/* S: Write permission */
-#define _PAGE_HWEXEC	0x00020	/* H: UX permission */
-
-#define _PAGE_ENDIAN	0x00040	/* H: E bit */
-#define _PAGE_GUARDED	0x00080	/* H: G bit */
-#define _PAGE_COHERENT	0x00100	/* H: M bit */
-#define _PAGE_NO_CACHE	0x00200	/* H: I bit */
-#define _PAGE_WRITETHRU	0x00400	/* H: W bit */
-
-#ifdef CONFIG_PTE_64BIT
-#define _PAGE_DIRTY	0x08000	/* S: Page dirty */
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK	0xffffffffffff0000ULL
-#else
-#define _PAGE_DIRTY	0x00800	/* S: Page dirty */
-#endif
-
-#define _PMD_PRESENT	0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD	(~PAGE_MASK)
-
-/* Until my rework is finished, FSL BookE still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES	1
-
-#elif defined(CONFIG_8xx)
-/* Definitions for 8xx embedded chips. */
-#define _PAGE_PRESENT	0x0001	/* Page is valid */
-#define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
-#define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
-#define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
-
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
- */
-#define _PAGE_EXEC	0x0008	/* software: i-cache coherency required */
-#define _PAGE_GUARDED	0x0010	/* software: guarded access */
-#define _PAGE_DIRTY	0x0020	/* software: page changed */
-#define _PAGE_RW	0x0040	/* software: user write access allowed */
-#define _PAGE_ACCESSED	0x0080	/* software: page referenced */
-
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change.  It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_HWWRITE	0x0100	/* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER	0x0800	/* One of the PP bits, the other is USER&~RW */
-
-#define _PMD_PRESENT	0x0001
-#define _PMD_BAD	0x0ff0
-#define _PMD_PAGE_MASK	0x000c
-#define _PMD_PAGE_8M	0x000c
-
-#define _PTE_NONE_MASK _PAGE_ACCESSED
-
-/* Until my rework is finished, 8xx still needs atomic PTE updates */
-#define PTE_ATOMIC_UPDATES	1
-
-#else /* CONFIG_6xx */
-/* Definitions for 60x, 740/750, etc. */
-#define _PAGE_PRESENT	0x001	/* software: pte contains a translation */
-#define _PAGE_HASHPTE	0x002	/* hash_page has made an HPTE for this pte */
-#define _PAGE_FILE	0x004	/* when !present: nonlinear file mapping */
-#define _PAGE_USER	0x004	/* usermode access allowed */
-#define _PAGE_GUARDED	0x008	/* G: prohibit speculative access */
-#define _PAGE_COHERENT	0x010	/* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE	0x020	/* I: cache inhibit */
-#define _PAGE_WRITETHRU	0x040	/* W: cache write-through */
-#define _PAGE_DIRTY	0x080	/* C: page changed */
-#define _PAGE_ACCESSED	0x100	/* R: page referenced */
-#define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
-#define _PAGE_RW	0x400	/* software: user write access allowed */
-
-#define _PTE_NONE_MASK	_PAGE_HASHPTE
-
-#define _PMD_PRESENT	0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD	(~PAGE_MASK)
-
-/* Hash table based platforms need atomic updates of the linux PTE */
-#define PTE_ATOMIC_UPDATES	1
-
-#endif
-
-/*
- * Some bits are only used on some cpu families...
- */
-#ifndef _PAGE_HASHPTE
-#define _PAGE_HASHPTE	0
-#endif
-#ifndef _PTE_NONE_MASK
-#define _PTE_NONE_MASK 0
-#endif
-#ifndef _PAGE_SHARED
-#define _PAGE_SHARED	0
-#endif
-#ifndef _PAGE_HWWRITE
-#define _PAGE_HWWRITE	0
-#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC	0
-#endif
-#ifndef _PAGE_EXEC
-#define _PAGE_EXEC	0
-#endif
-#ifndef _PMD_PRESENT_MASK
-#define _PMD_PRESENT_MASK	_PMD_PRESENT
-#endif
-#ifndef _PMD_SIZE
-#define _PMD_SIZE	0
-#define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
-#endif
-
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-/*
- * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
- * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
- * to have it in the Linux PTE, and in fact the bit could be reused for
- * another purpose.  -- paulus.
- */
-
-#ifdef CONFIG_44x
-#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
-#else
-#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
-#endif
-#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
-#define _PAGE_KERNEL	(_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
-
-#ifdef CONFIG_PPC_STD_MMU
-/* On standard PPC MMU, no user access implies kernel read/write access,
- * so to write-protect kernel memory we must turn on user access */
-#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
-#else
-#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED)
-#endif
-
-#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define _PAGE_RAM	(_PAGE_KERNEL | _PAGE_HWEXEC)
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
-	defined(CONFIG_KPROBES)
-/* We want the debuggers to be able to set breakpoints anywhere, so
- * don't write protect the kernel text */
-#define _PAGE_RAM_TEXT	_PAGE_RAM
-#else
-#define _PAGE_RAM_TEXT	(_PAGE_KERNEL_RO | _PAGE_HWEXEC)
-#endif
-
-#define PAGE_NONE	__pgprot(_PAGE_BASE)
-#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-
-#define PAGE_KERNEL		__pgprot(_PAGE_RAM)
-#define PAGE_KERNEL_NOCACHE	__pgprot(_PAGE_IO)
-
-/*
- * The PowerPC can only do execute protection on a segment (256MB) basis,
- * not on a page basis.  So we consider execute permission the same as read.
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- */
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY_X
-#define __P010	PAGE_COPY
-#define __P011	PAGE_COPY_X
-#define __P100	PAGE_READONLY
-#define __P101	PAGE_READONLY_X
-#define __P110	PAGE_COPY
-#define __P111	PAGE_COPY_X
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY_X
-#define __S010	PAGE_SHARED
-#define __S011	PAGE_SHARED_X
-#define __S100	PAGE_READONLY
-#define __S101	PAGE_READONLY_X
-#define __S110	PAGE_SHARED
-#define __S111	PAGE_SHARED_X
-
-#ifndef __ASSEMBLY__
-/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
- * kernel without large page PMD support */
-extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
-
-/*
- * Conversions between PTE values and page frame numbers.
- */
-
-/* in some case we want to additionaly adjust where the pfn is in the pte to
- * allow room for more flags */
-#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#define PFN_SHIFT_OFFSET	(PAGE_SHIFT + 8)
-#else
-#define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
-#endif
-
-#define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
-#define pte_page(x)		pfn_to_page(pte_pfn(x))
-
-#define pfn_pte(pfn, prot)	__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
-					pgprot_val(prot))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#endif /* __ASSEMBLY__ */
-
-#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
-#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,ptep)	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
-
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
-#define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
-#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
-
-#ifndef __ASSEMBLY__
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
-static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte)	{ return 0; }
-
-static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
-	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-
-static inline pte_t pte_mkwrite(pte_t pte) {
-	pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
-	pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
-	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
-	return pte; }
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
-	return pte;
-}
-
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_pages(unsigned context, unsigned long va,
-			    unsigned long pmdval, int count);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va,
-			  unsigned long pmdval);
-
-/*
- * Atomic PTE updates.
- *
- * pte_update clears and sets bit atomically, and returns
- * the old pte value.  In the 64-bit PTE case we lock around the
- * low PTE word since we expect ALL flag bits to be there
- */
-#ifndef CONFIG_PTE_64BIT
-static inline unsigned long pte_update(pte_t *p,
-				       unsigned long clr,
-				       unsigned long set)
-{
-#ifdef PTE_ATOMIC_UPDATES
-	unsigned long old, tmp;
-
-	__asm__ __volatile__("\
-1:	lwarx	%0,0,%3\n\
-	andc	%1,%0,%4\n\
-	or	%1,%1,%5\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%1,0,%3\n\
-	bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*p)
-	: "r" (p), "r" (clr), "r" (set), "m" (*p)
-	: "cc" );
-#else /* PTE_ATOMIC_UPDATES */
-	unsigned long old = pte_val(*p);
-	*p = __pte((old & ~clr) | set);
-#endif /* !PTE_ATOMIC_UPDATES */
-
-#ifdef CONFIG_44x
-	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
-		icache_44x_need_flush = 1;
-#endif
-	return old;
-}
-#else /* CONFIG_PTE_64BIT */
-/* TODO: Change that to only modify the low word and move set_pte_at()
- * out of line
- */
-static inline unsigned long long pte_update(pte_t *p,
-					    unsigned long clr,
-					    unsigned long set)
-{
-#ifdef PTE_ATOMIC_UPDATES
-	unsigned long long old;
-	unsigned long tmp;
-
-	__asm__ __volatile__("\
-1:	lwarx	%L0,0,%4\n\
-	lwzx	%0,0,%3\n\
-	andc	%1,%L0,%5\n\
-	or	%1,%1,%6\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%1,0,%4\n\
-	bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*p)
-	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
-	: "cc" );
-#else /* PTE_ATOMIC_UPDATES */
-	unsigned long long old = pte_val(*p);
-	*p = __pte((old & ~(unsigned long long)clr) | set);
-#endif /* !PTE_ATOMIC_UPDATES */
-
-#ifdef CONFIG_44x
-	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
-		icache_44x_need_flush = 1;
-#endif
-	return old;
-}
-#endif /* CONFIG_PTE_64BIT */
-
-/*
- * set_pte stores a linux PTE into the linux page table.
- * On machines which use an MMU hash table we avoid changing the
- * _PAGE_HASHPTE bit.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pte)
-{
-#if _PAGE_HASHPTE != 0
-	pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
-#else
-	*ptep = pte;
-#endif
-}
-
-/*
- * 2.6 calls this without flushing the TLB entry; this is wrong
- * for our hash-based implementation, we fix that up here.
- */
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
-{
-	unsigned long old;
-	old = pte_update(ptep, _PAGE_ACCESSED, 0);
-#if _PAGE_HASHPTE != 0
-	if (old & _PAGE_HASHPTE) {
-		unsigned long ptephys = __pa(ptep) & PAGE_MASK;
-		flush_hash_pages(context, addr, ptephys, 1);
-	}
-#endif
-	return (old & _PAGE_ACCESSED) != 0;
-}
-#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
-	__ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-				       pte_t *ptep)
-{
-	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
-				      pte_t *ptep)
-{
-	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
-}
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	ptep_set_wrprotect(mm, addr, ptep);
-}
-
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
-{
-	unsigned long bits = pte_val(entry) &
-		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
-	pte_update(ptep, 0, bits);
-}
-
-#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({									   \
-	int __changed = !pte_same(*(__ptep), __entry);			   \
-	if (__changed) {						   \
-		__ptep_set_access_flags(__ptep, __entry, __dirty);         \
-		flush_tlb_page_nohash(__vma, __address);		   \
-	}								   \
-	__changed;							   \
-})
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-				     unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
-
-/*
- * Note that on Book E processors, the pmd contains the kernel virtual
- * (lowmem) address of the pte page.  The physical address is less useful
- * because everything runs with translation enabled (even the TLB miss
- * handler).  On everything else the pmd contains the physical address
- * of the pte page.  -- paulus
- */
-#ifndef CONFIG_BOOKE
-#define pmd_page_vaddr(pmd)	\
-	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd)		\
-	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
-#else
-#define pmd_page_vaddr(pmd)	\
-	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd)		\
-	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
-#endif
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
-#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address)		\
-	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, addr)	\
-	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
-#define pte_offset_map(dir, addr)		\
-	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
-#define pte_offset_map_nested(dir, addr)	\
-	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
-
-#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
-#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
-
-/*
- * Encode and decode a swap entry.
- * Note that the bits we use in a PTE for representing a swap entry
- * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
- *_PAGE_HASHPTE bit (if used).  -- paulus
- */
-#define __swp_type(entry)		((entry).val & 0x1f)
-#define __swp_offset(entry)		((entry).val >> 5)
-#define __swp_entry(type, offset)	((swp_entry_t) { (type) | ((offset) << 5) })
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
-
-/* Encode and decode a nonlinear file mapping entry */
-#define PTE_FILE_MAX_BITS	29
-#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
-#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
-		      pmd_t **pmdp);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
deleted file mode 100644
index ab98a9c80b28..000000000000
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ /dev/null
@@ -1,458 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
-#define _ASM_POWERPC_PGTABLE_PPC64_H_
-/*
- * This file contains the functions and defines necessary to modify and use
- * the ppc64 hashed page table.
- */
-
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <asm/tlbflush.h>
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pgtable-64k.h>
-#else
-#include <asm/pgtable-4k.h>
-#endif
-
-#define FIRST_USER_ADDRESS	0
-
-/*
- * Size of EA range mapped by our pagetables.
- */
-#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
-                	    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
-#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
-
-#if TASK_SIZE_USER64 > PGTABLE_RANGE
-#error TASK_SIZE_USER64 exceeds pagetable range
-#endif
-
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
-#error TASK_SIZE_USER64 exceeds user VSID range
-#endif
-
-
-/*
- * Define the address range of the vmalloc VM area.
- */
-#define VMALLOC_START ASM_CONST(0xD000000000000000)
-#define VMALLOC_SIZE  (PGTABLE_RANGE >> 1)
-#define VMALLOC_END   (VMALLOC_START + VMALLOC_SIZE)
-
-/*
- * Define the address ranges for MMIO and IO space :
- *
- *  ISA_IO_BASE = VMALLOC_END, 64K reserved area
- *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
- * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
- */
-#define FULL_IO_SIZE	0x80000000ul
-#define  ISA_IO_BASE	(VMALLOC_END)
-#define  ISA_IO_END	(VMALLOC_END + 0x10000ul)
-#define  PHB_IO_BASE	(ISA_IO_END)
-#define  PHB_IO_END	(VMALLOC_END + FULL_IO_SIZE)
-#define IOREMAP_BASE	(PHB_IO_END)
-#define IOREMAP_END	(VMALLOC_START + PGTABLE_RANGE)
-
-/*
- * Region IDs
- */
-#define REGION_SHIFT		60UL
-#define REGION_MASK		(0xfUL << REGION_SHIFT)
-#define REGION_ID(ea)		(((unsigned long)(ea)) >> REGION_SHIFT)
-
-#define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
-#define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
-#define VMEMMAP_REGION_ID	(0xfUL)
-#define USER_REGION_ID		(0UL)
-
-/*
- * Defines the address of the vmemap area, in its own region
- */
-#define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
-#define vmemmap			((struct page *)VMEMMAP_BASE)
-
-
-/*
- * Common bits in a linux-style PTE.  These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible. Additional
- * bits may be defined in pgtable-*.h
- */
-#define _PAGE_PRESENT	0x0001 /* software: pte contains a translation */
-#define _PAGE_USER	0x0002 /* matches one of the PP bits */
-#define _PAGE_FILE	0x0002 /* (!present only) software: pte holds file offset */
-#define _PAGE_EXEC	0x0004 /* No execute on POWER4 and newer (we invert) */
-#define _PAGE_GUARDED	0x0008
-#define _PAGE_COHERENT	0x0010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE	0x0020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU	0x0040 /* W: cache write-through */
-#define _PAGE_DIRTY	0x0080 /* C: page changed */
-#define _PAGE_ACCESSED	0x0100 /* R: page referenced */
-#define _PAGE_RW	0x0200 /* software: user write access allowed */
-#define _PAGE_BUSY	0x0800 /* software: PTE & hash are busy */
-
-/* Strong Access Ordering */
-#define _PAGE_SAO	(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
-
-#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
-
-#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY)
-
-/* __pgprot defined in asm-powerpc/page.h */
-#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
-
-#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
-#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_KERNEL	__pgprot(_PAGE_BASE | _PAGE_WRENABLE)
-#define PAGE_KERNEL_CI	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-			       _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
-
-#define PAGE_AGP	__pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
-#define HAVE_PAGE_AGP
-
-/* PTEIDX nibble */
-#define _PTEIDX_SECONDARY	0x8
-#define _PTEIDX_GROUP_IX	0x7
-
-
-/*
- * POWER4 and newer have per page execute protection, older chips can only
- * do this on a segment (256MB) basis.
- *
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- *
- * Note due to the way vm flags are laid out, the bits are XWR
- */
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY
-#define __P010	PAGE_COPY
-#define __P011	PAGE_COPY
-#define __P100	PAGE_READONLY_X
-#define __P101	PAGE_READONLY_X
-#define __P110	PAGE_COPY_X
-#define __P111	PAGE_COPY_X
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY
-#define __S010	PAGE_SHARED
-#define __S011	PAGE_SHARED
-#define __S100	PAGE_READONLY_X
-#define __S101	PAGE_READONLY_X
-#define __S110	PAGE_SHARED_X
-#define __S111	PAGE_SHARED_X
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * mk_pte takes a (struct page *) as input
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
-{
-	pte_t pte;
-
-
-	pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
-	return pte;
-}
-
-#define pte_modify(_pte, newprot) \
-  (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
-
-#define pte_none(pte)		((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
-#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
-
-/* pte_clear moved to later in this file */
-
-#define pte_pfn(x)		((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
-#define pte_page(x)		pfn_to_page(pte_pfn(x))
-
-#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
-#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
-
-#define pmd_set(pmdp, pmdval) 	(pmd_val(*(pmdp)) = (pmdval))
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define	pmd_bad(pmd)		(!is_kernel_addr(pmd_val(pmd)) \
-				 || (pmd_val(pmd) & PMD_BAD_BITS))
-#define	pmd_present(pmd)	(pmd_val(pmd) != 0)
-#define	pmd_clear(pmdp)		(pmd_val(*(pmdp)) = 0)
-#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
-#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
-
-#define pud_set(pudp, pudval)	(pud_val(*(pudp)) = (pudval))
-#define pud_none(pud)		(!pud_val(pud))
-#define	pud_bad(pud)		(!is_kernel_addr(pud_val(pud)) \
-				 || (pud_val(pud) & PUD_BAD_BITS))
-#define pud_present(pud)	(pud_val(pud) != 0)
-#define pud_clear(pudp)		(pud_val(*(pudp)) = 0)
-#define pud_page_vaddr(pud)	(pud_val(pud) & ~PUD_MASKED_BITS)
-#define pud_page(pud)		virt_to_page(pud_page_vaddr(pud))
-
-#define pgd_set(pgdp, pudp)	({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
-
-/*
- * Find an entry in a page-table-directory.  We combine the address region
- * (the high order N bits) and the pgd portion of the address.
- */
-/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
-#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff)
-
-#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
-
-#define pmd_offset(pudp,addr) \
-  (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
-
-#define pte_offset_kernel(dir,addr) \
-  (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
-
-#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
-#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
-#define pte_unmap(pte)			do { } while(0)
-#define pte_unmap_nested(pte)		do { } while(0)
-
-/* to find an entry in a kernel page-table-directory */
-/* This now only contains the vmalloc pages */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
-static inline int pte_special(pte_t pte) { return 0; }
-
-static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_RW); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
-	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) {
-	pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
-	pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
-	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) {
-	return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
-	return pte; }
-
-/* Atomic PTE updates */
-static inline unsigned long pte_update(struct mm_struct *mm,
-				       unsigned long addr,
-				       pte_t *ptep, unsigned long clr,
-				       int huge)
-{
-	unsigned long old, tmp;
-
-	__asm__ __volatile__(
-	"1:	ldarx	%0,0,%3		# pte_update\n\
-	andi.	%1,%0,%6\n\
-	bne-	1b \n\
-	andc	%1,%0,%4 \n\
-	stdcx.	%1,0,%3 \n\
-	bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
-	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
-	: "cc" );
-
-	if (old & _PAGE_HASHPTE)
-		hpte_need_flush(mm, addr, ptep, old, huge);
-	return old;
-}
-
-static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
-					      unsigned long addr, pte_t *ptep)
-{
-	unsigned long old;
-
-       	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
-		return 0;
-	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
-	return (old & _PAGE_ACCESSED) != 0;
-}
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define ptep_test_and_clear_young(__vma, __addr, __ptep)		   \
-({									   \
-	int __r;							   \
-	__r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
-	__r;								   \
-})
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
-				      pte_t *ptep)
-{
-	unsigned long old;
-
-       	if ((pte_val(*ptep) & _PAGE_RW) == 0)
-       		return;
-	old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	unsigned long old;
-
-	if ((pte_val(*ptep) & _PAGE_RW) == 0)
-		return;
-	old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
-}
-
-/*
- * We currently remove entries from the hashtable regardless of whether
- * the entry was young or dirty. The generic routines only flush if the
- * entry was young or dirty which is not good enough.
- *
- * We should be more intelligent about this but for the moment we override
- * these functions and force a tlb flush unconditionally
- */
-#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-#define ptep_clear_flush_young(__vma, __address, __ptep)		\
-({									\
-	int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
-						  __ptep);		\
-	__young;							\
-})
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
-				       unsigned long addr, pte_t *ptep)
-{
-	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
-	return __pte(old);
-}
-
-static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
-			     pte_t * ptep)
-{
-	pte_update(mm, addr, ptep, ~0UL, 0);
-}
-
-/*
- * set_pte stores a linux PTE into the linux page table.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pte)
-{
-	if (pte_present(*ptep))
-		pte_clear(mm, addr, ptep);
-	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-	*ptep = pte;
-}
-
-/* Set the dirty and/or accessed bits atomically in a linux PTE, this
- * function doesn't need to flush the hash entry
- */
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
-{
-	unsigned long bits = pte_val(entry) &
-		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
-	unsigned long old, tmp;
-
-	__asm__ __volatile__(
-	"1:	ldarx	%0,0,%4\n\
-		andi.	%1,%0,%6\n\
-		bne-	1b \n\
-		or	%0,%3,%0\n\
-		stdcx.	%0,0,%4\n\
-		bne-	1b"
-	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
-	:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
-	:"cc");
-}
-#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({									   \
-	int __changed = !pte_same(*(__ptep), __entry);			   \
-	if (__changed) {						   \
-		__ptep_set_access_flags(__ptep, __entry, __dirty);    	   \
-		flush_tlb_page_nohash(__vma, __address);		   \
-	}								   \
-	__changed;							   \
-})
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-				     unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
-
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
-	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/* Encode and de-code a swap entry */
-#define __swp_type(entry)	(((entry).val >> 1) & 0x3f)
-#define __swp_offset(entry)	((entry).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)})
-#define __pte_to_swp_entry(pte)	((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT})
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val << PTE_RPN_SHIFT })
-#define pte_to_pgoff(pte)	(pte_val(pte) >> PTE_RPN_SHIFT)
-#define pgoff_to_pte(off)	((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
-#define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_RPN_SHIFT)
-
-void pgtable_cache_init(void);
-
-/*
- * find_linux_pte returns the address of a linux pte for a given
- * effective address and directory.  If not found, it returns zero.
- */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
-{
-	pgd_t *pg;
-	pud_t *pu;
-	pmd_t *pm;
-	pte_t *pt = NULL;
-
-	pg = pgdir + pgd_index(ea);
-	if (!pgd_none(*pg)) {
-		pu = pud_offset(pg, ea);
-		if (!pud_none(*pu)) {
-			pm = pmd_offset(pu, ea);
-			if (pmd_present(*pm))
-				pt = pte_offset_kernel(pm, ea);
-		}
-	}
-	return pt;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/asm-powerpc/pgtable.h b/include/asm-powerpc/pgtable.h
deleted file mode 100644
index d18ffe7bc7c4..000000000000
--- a/include/asm-powerpc/pgtable.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _ASM_POWERPC_PGTABLE_H
-#define _ASM_POWERPC_PGTABLE_H
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>		/* For TASK_SIZE */
-#include <asm/mmu.h>
-#include <asm/page.h>
-struct mm_struct;
-#endif /* !__ASSEMBLY__ */
-
-#if defined(CONFIG_PPC64)
-#  include <asm/pgtable-ppc64.h>
-#else
-#  include <asm/pgtable-ppc32.h>
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-extern pgd_t swapper_pg_dir[];
-
-extern void paging_init(void);
-
-/*
- * kern_addr_valid is intended to indicate whether an address is a valid
- * kernel address.  Most 32-bit archs define it as always true (like this)
- * but most 64-bit archs actually perform a test.  What should we do here?
- */
-#define kern_addr_valid(addr)	(1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#include <asm-generic/pgtable.h>
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h
deleted file mode 100644
index fa74c6c3e106..000000000000
--- a/include/asm-powerpc/phyp_dump.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Hypervisor-assisted dump
- *
- * Linas Vepstas, Manish Ahuja 2008
- * Copyright 2008 IBM Corp.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#ifndef _PPC64_PHYP_DUMP_H
-#define _PPC64_PHYP_DUMP_H
-
-#ifdef CONFIG_PHYP_DUMP
-
-/* The RMR region will be saved for later dumping
- * whenever the kernel crashes. Set this to 256MB. */
-#define PHYP_DUMP_RMR_START 0x0
-#define PHYP_DUMP_RMR_END   (1UL<<28)
-
-struct phyp_dump {
-	/* Memory that is reserved during very early boot. */
-	unsigned long init_reserve_start;
-	unsigned long init_reserve_size;
-	/* cmd line options during boot */
-	unsigned long reserve_bootvar;
-	unsigned long phyp_dump_at_boot;
-	/* Check status during boot if dump supported, active & present*/
-	unsigned long phyp_dump_configured;
-	unsigned long phyp_dump_is_active;
-	/* store cpu & hpte size */
-	unsigned long cpu_state_size;
-	unsigned long hpte_region_size;
-	/* previous scratch area values */
-	unsigned long reserved_scratch_addr;
-	unsigned long reserved_scratch_size;
-};
-
-extern struct phyp_dump *phyp_dump_info;
-
-int early_init_dt_scan_phyp_dump(unsigned long node,
-		const char *uname, int depth, void *data);
-
-#endif /* CONFIG_PHYP_DUMP */
-#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
deleted file mode 100644
index 877c35a4356e..000000000000
--- a/include/asm-powerpc/pmac_feature.h
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * Definition of platform feature hooks for PowerMacs
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Paul Mackerras &
- *                    Ben. Herrenschmidt.
- *
- *
- * Note: I removed media-bay details from the feature stuff, I believe it's
- *       not worth it, the media-bay driver can directly use the mac-io
- *       ASIC registers.
- *
- * Implementation note: Currently, none of these functions will block.
- * However, they may internally protect themselves with a spinlock
- * for way too long. Be prepared for at least some of these to block
- * in the future.
- *
- * Unless specifically defined, the result code is assumed to be an
- * error when negative, 0 is the default success result. Some functions
- * may return additional positive result values.
- *
- * To keep implementation simple, all feature calls are assumed to have
- * the prototype parameters (struct device_node* node, int value).
- * When either is not used, pass 0.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_PMAC_FEATURE_H
-#define __ASM_POWERPC_PMAC_FEATURE_H
-
-#include <asm/macio.h>
-#include <asm/machdep.h>
-
-/*
- * Known Mac motherboard models
- *
- * Please, report any error here to benh@kernel.crashing.org, thanks !
- *
- * Note that I don't fully maintain this list for Core99 & MacRISC2
- * and I'm considering removing all NewWorld entries from it and
- * entirely rely on the model string.
- */
-
-/* PowerSurge are the first generation of PCI Pmacs. This include
- * all of the Grand-Central based machines. We currently don't
- * differenciate most of them.
- */
-#define PMAC_TYPE_PSURGE		0x10	/* PowerSurge */
-#define PMAC_TYPE_ANS			0x11	/* Apple Network Server */
-
-/* Here is the infamous serie of OHare based machines
- */
-#define PMAC_TYPE_COMET			0x20	/* Beleived to be PowerBook 2400 */
-#define PMAC_TYPE_HOOPER		0x21	/* Beleived to be PowerBook 3400 */
-#define PMAC_TYPE_KANGA			0x22	/* PowerBook 3500 (first G3) */
-#define PMAC_TYPE_ALCHEMY		0x23	/* Alchemy motherboard base */
-#define PMAC_TYPE_GAZELLE		0x24	/* Spartacus, some 5xxx/6xxx */
-#define PMAC_TYPE_UNKNOWN_OHARE		0x2f	/* Unknown, but OHare based */
-
-/* Here are the Heathrow based machines
- * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
- */
-#define PMAC_TYPE_GOSSAMER		0x30	/* Gossamer motherboard */
-#define PMAC_TYPE_SILK			0x31	/* Desktop PowerMac G3 */
-#define PMAC_TYPE_WALLSTREET		0x32	/* Wallstreet/Mainstreet PowerBook*/
-#define PMAC_TYPE_UNKNOWN_HEATHROW	0x3f	/* Unknown but heathrow based */
-
-/* Here are newworld machines based on Paddington (heathrow derivative)
- */
-#define PMAC_TYPE_101_PBOOK		0x40	/* 101 PowerBook (aka Lombard) */
-#define PMAC_TYPE_ORIG_IMAC		0x41	/* First generation iMac */
-#define PMAC_TYPE_YOSEMITE		0x42	/* B&W G3 */
-#define PMAC_TYPE_YIKES			0x43	/* Yikes G4 (PCI graphics) */
-#define PMAC_TYPE_UNKNOWN_PADDINGTON	0x4f	/* Unknown but paddington based */
-
-/* Core99 machines based on UniNorth 1.0 and 1.5
- *
- * Note: A single entry here may cover several actual models according
- * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
- * FireWire based iMacs, etc...). Those machines are too similar to be
- * distinguished here, when they need to be differencied, use the
- * device-tree "model" or "compatible" property.
- */
-#define PMAC_TYPE_ORIG_IBOOK		0x40	/* First iBook model (no firewire) */
-#define PMAC_TYPE_SAWTOOTH		0x41	/* Desktop G4s */
-#define PMAC_TYPE_FW_IMAC		0x42	/* FireWire iMacs (except Pangea based) */
-#define PMAC_TYPE_FW_IBOOK		0x43	/* FireWire iBooks (except iBook2) */
-#define PMAC_TYPE_CUBE			0x44	/* Cube PowerMac */
-#define PMAC_TYPE_QUICKSILVER		0x45	/* QuickSilver G4s */
-#define PMAC_TYPE_PISMO			0x46	/* Pismo PowerBook */
-#define PMAC_TYPE_TITANIUM		0x47	/* Titanium PowerBook */
-#define PMAC_TYPE_TITANIUM2		0x48	/* Titanium II PowerBook (no L3, M6) */
-#define PMAC_TYPE_TITANIUM3		0x49	/* Titanium III PowerBook (with L3 & M7) */
-#define PMAC_TYPE_TITANIUM4		0x50	/* Titanium IV PowerBook (with L3 & M9) */
-#define PMAC_TYPE_EMAC			0x50	/* eMac */
-#define PMAC_TYPE_UNKNOWN_CORE99	0x5f
-
-/* MacRisc2 with UniNorth 2.0 */
-#define PMAC_TYPE_RACKMAC		0x80	/* XServe */
-#define PMAC_TYPE_WINDTUNNEL		0x81
-
-/* MacRISC2 machines based on the Pangea chipset
- */
-#define PMAC_TYPE_PANGEA_IMAC		0x100	/* Flower Power iMac */
-#define PMAC_TYPE_IBOOK2		0x101	/* iBook2 (polycarbonate) */
-#define PMAC_TYPE_FLAT_PANEL_IMAC	0x102	/* Flat panel iMac */
-#define PMAC_TYPE_UNKNOWN_PANGEA	0x10f
-
-/* MacRISC2 machines based on the Intrepid chipset
- */
-#define PMAC_TYPE_UNKNOWN_INTREPID	0x11f	/* Generic */
-
-/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
- * but rather machine families
- */
-#define PMAC_TYPE_POWERMAC_G5		0x150	/* U3 & U3H based */
-#define PMAC_TYPE_POWERMAC_G5_U3L	0x151	/* U3L based desktop */
-#define PMAC_TYPE_IMAC_G5		0x152	/* iMac G5 */
-#define PMAC_TYPE_XSERVE_G5		0x153	/* Xserve G5 */
-#define PMAC_TYPE_UNKNOWN_K2		0x19f	/* Any other K2 based */
-#define PMAC_TYPE_UNKNOWN_SHASTA       	0x19e	/* Any other Shasta based */
-
-/*
- * Motherboard flags
- */
-
-#define PMAC_MB_CAN_SLEEP		0x00000001
-#define PMAC_MB_HAS_FW_POWER		0x00000002
-#define PMAC_MB_OLD_CORE99		0x00000004
-#define PMAC_MB_MOBILE			0x00000008
-#define PMAC_MB_MAY_SLEEP		0x00000010
-
-/*
- * Feature calls supported on pmac
- *
- */
-
-/*
- * Use this inline wrapper
- */
-struct device_node;
-
-static inline long pmac_call_feature(int selector, struct device_node* node,
-					long param, long value)
-{
-	if (!ppc_md.feature_call || !machine_is(powermac))
-		return -ENODEV;
-	return ppc_md.feature_call(selector, node, param, value);
-}
-
-/* PMAC_FTR_SERIAL_ENABLE	(struct device_node* node, int param, int value)
- * enable/disable an SCC side. Pass the node corresponding to the
- * channel side as a parameter.
- * param is the type of port
- * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
- * for use by xmon.
- */
-#define PMAC_FTR_SCC_ENABLE		PMAC_FTR_DEF(0)
-	#define PMAC_SCC_ASYNC		0
-	#define PMAC_SCC_IRDA		1
-	#define PMAC_SCC_I2S1		2
-	#define PMAC_SCC_FLAG_XMON	0x00001000
-
-/* PMAC_FTR_MODEM_ENABLE	(struct device_node* node, 0, int value)
- * enable/disable the internal modem.
- */
-#define PMAC_FTR_MODEM_ENABLE		PMAC_FTR_DEF(1)
-
-/* PMAC_FTR_SWIM3_ENABLE	(struct device_node* node, 0,int value)
- * enable/disable the swim3 (floppy) cell of a mac-io ASIC
- */
-#define PMAC_FTR_SWIM3_ENABLE		PMAC_FTR_DEF(2)
-
-/* PMAC_FTR_MESH_ENABLE		(struct device_node* node, 0, int value)
- * enable/disable the mesh (scsi) cell of a mac-io ASIC
- */
-#define PMAC_FTR_MESH_ENABLE		PMAC_FTR_DEF(3)
-
-/* PMAC_FTR_IDE_ENABLE		(struct device_node* node, int busID, int value)
- * enable/disable an IDE port of a mac-io ASIC
- * pass the busID parameter
- */
-#define PMAC_FTR_IDE_ENABLE		PMAC_FTR_DEF(4)
-
-/* PMAC_FTR_IDE_RESET		(struct device_node* node, int busID, int value)
- * assert(1)/release(0) an IDE reset line (mac-io IDE only)
- */
-#define PMAC_FTR_IDE_RESET		PMAC_FTR_DEF(5)
-
-/* PMAC_FTR_BMAC_ENABLE		(struct device_node* node, 0, int value)
- * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
- * it's reset line
- */
-#define PMAC_FTR_BMAC_ENABLE		PMAC_FTR_DEF(6)
-
-/* PMAC_FTR_GMAC_ENABLE		(struct device_node* node, 0, int value)
- * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
- * control the cell's clock.
- */
-#define PMAC_FTR_GMAC_ENABLE		PMAC_FTR_DEF(7)
-
-/* PMAC_FTR_GMAC_PHY_RESET	(struct device_node* node, 0, 0)
- * Perform a HW reset of the PHY connected to a gmac controller.
- * Pass the gmac device node, not the PHY node.
- */
-#define PMAC_FTR_GMAC_PHY_RESET		PMAC_FTR_DEF(8)
-
-/* PMAC_FTR_SOUND_CHIP_ENABLE	(struct device_node* node, 0, int value)
- * enable/disable the sound chip, whatever it is and provided it can
- * acually be controlled
- */
-#define PMAC_FTR_SOUND_CHIP_ENABLE	PMAC_FTR_DEF(9)
-
-/* -- add various tweaks related to sound routing -- */
-
-/* PMAC_FTR_AIRPORT_ENABLE	(struct device_node* node, 0, int value)
- * enable/disable the airport card
- */
-#define PMAC_FTR_AIRPORT_ENABLE		PMAC_FTR_DEF(10)
-
-/* PMAC_FTR_RESET_CPU		(NULL, int cpu_nr, 0)
- * toggle the reset line of a CPU on an uninorth-based SMP machine
- */
-#define PMAC_FTR_RESET_CPU		PMAC_FTR_DEF(11)
-
-/* PMAC_FTR_USB_ENABLE		(struct device_node* node, 0, int value)
- * enable/disable an USB cell, along with the power of the USB "pad"
- * on keylargo based machines
- */
-#define PMAC_FTR_USB_ENABLE		PMAC_FTR_DEF(12)
-
-/* PMAC_FTR_1394_ENABLE		(struct device_node* node, 0, int value)
- * enable/disable the firewire cell of an uninorth ASIC.
- */
-#define PMAC_FTR_1394_ENABLE		PMAC_FTR_DEF(13)
-
-/* PMAC_FTR_1394_CABLE_POWER	(struct device_node* node, 0, int value)
- * enable/disable the firewire cable power supply of the uninorth
- * firewire cell
- */
-#define PMAC_FTR_1394_CABLE_POWER	PMAC_FTR_DEF(14)
-
-/* PMAC_FTR_SLEEP_STATE		(struct device_node* node, 0, int value)
- * set the sleep state of the motherboard.
- *
- * Pass -1 as value to query for sleep capability
- * Pass 1 to set IOs to sleep
- * Pass 0 to set IOs to wake
- */
-#define PMAC_FTR_SLEEP_STATE		PMAC_FTR_DEF(15)
-
-/* PMAC_FTR_GET_MB_INFO		(NULL, selector, 0)
- *
- * returns some motherboard infos.
- * selector: 0  - model id
- *           1  - model flags (capabilities)
- *           2  - model name (cast to const char *)
- */
-#define PMAC_FTR_GET_MB_INFO		PMAC_FTR_DEF(16)
-#define   PMAC_MB_INFO_MODEL	0
-#define   PMAC_MB_INFO_FLAGS	1
-#define   PMAC_MB_INFO_NAME	2
-
-/* PMAC_FTR_READ_GPIO		(NULL, int index, 0)
- *
- * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
- * the value returned is a byte (positive), or a negative error code
- */
-#define PMAC_FTR_READ_GPIO		PMAC_FTR_DEF(17)
-
-/* PMAC_FTR_WRITE_GPIO		(NULL, int index, int value)
- *
- * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
- */
-#define PMAC_FTR_WRITE_GPIO		PMAC_FTR_DEF(18)
-
-/* PMAC_FTR_ENABLE_MPIC
- *
- * Enable the MPIC cell
- */
-#define PMAC_FTR_ENABLE_MPIC		PMAC_FTR_DEF(19)
-
-/* PMAC_FTR_AACK_DELAY_ENABLE	(NULL, int enable, 0)
- *
- * Enable/disable the AACK delay on the northbridge for systems using DFS
- */
-#define PMAC_FTR_AACK_DELAY_ENABLE     	PMAC_FTR_DEF(20)
-
-/* PMAC_FTR_DEVICE_CAN_WAKE
- *
- * Used by video drivers to inform system that they can actually perform
- * wakeup from sleep
- */
-#define PMAC_FTR_DEVICE_CAN_WAKE	PMAC_FTR_DEF(22)
-
-
-/* Don't use those directly, they are for the sake of pmac_setup.c */
-extern long pmac_do_feature_call(unsigned int selector, ...);
-extern void pmac_feature_init(void);
-
-/* Video suspend tweak */
-extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
-extern void pmac_call_early_video_resume(void);
-
-#define PMAC_FTR_DEF(x) ((0x6660000) | (x))
-
-/* The AGP driver registers itself here */
-extern void pmac_register_agp_pm(struct pci_dev *bridge,
-				 int (*suspend)(struct pci_dev *bridge),
-				 int (*resume)(struct pci_dev *bridge));
-
-/* Those are meant to be used by video drivers to deal with AGP
- * suspend resume properly
- */
-extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
-extern void pmac_resume_agp_for_card(struct pci_dev *dev);
-
-/*
- * The part below is for use by macio_asic.c only, do not rely
- * on the data structures or constants below in a normal driver
- *
- */
-
-#define MAX_MACIO_CHIPS		2
-
-enum {
-	macio_unknown = 0,
-	macio_grand_central,
-	macio_ohare,
-	macio_ohareII,
-	macio_heathrow,
-	macio_gatwick,
-	macio_paddington,
-	macio_keylargo,
-	macio_pangea,
-	macio_intrepid,
-	macio_keylargo2,
-	macio_shasta,
-};
-
-struct macio_chip
-{
-	struct device_node	*of_node;
-	int			type;
-	const char		*name;
-	int			rev;
-	volatile u32		__iomem *base;
-	unsigned long		flags;
-
-	/* For use by macio_asic PCI driver */
-	struct macio_bus	lbus;
-};
-
-extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
-
-#define MACIO_FLAG_SCCA_ON	0x00000001
-#define MACIO_FLAG_SCCB_ON	0x00000002
-#define MACIO_FLAG_SCC_LOCKED	0x00000004
-#define MACIO_FLAG_AIRPORT_ON	0x00000010
-#define MACIO_FLAG_FW_SUPPORTED	0x00000020
-
-extern struct macio_chip* macio_find(struct device_node* child, int type);
-
-#define MACIO_FCR32(macio, r)	((macio)->base + ((r) >> 2))
-#define MACIO_FCR8(macio, r)	(((volatile u8 __iomem *)((macio)->base)) + (r))
-
-#define MACIO_IN32(r)		(in_le32(MACIO_FCR32(macio,r)))
-#define MACIO_OUT32(r,v)	(out_le32(MACIO_FCR32(macio,r), (v)))
-#define MACIO_BIS(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) | (v)))
-#define MACIO_BIC(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
-#define MACIO_IN8(r)		(in_8(MACIO_FCR8(macio,r)))
-#define MACIO_OUT8(r,v)		(out_8(MACIO_FCR8(macio,r), (v)))
-
-/*
- * Those are exported by pmac feature for internal use by arch code
- * only like the platform function callbacks, do not use directly in drivers
- */
-extern spinlock_t feature_lock;
-extern struct device_node *uninorth_node;
-extern u32 __iomem *uninorth_base;
-
-/*
- * Uninorth reg. access. Note that Uni-N regs are big endian
- */
-
-#define UN_REG(r)	(uninorth_base + ((r) >> 2))
-#define UN_IN(r)	(in_be32(UN_REG(r)))
-#define UN_OUT(r,v)	(out_be32(UN_REG(r), (v)))
-#define UN_BIS(r,v)	(UN_OUT((r), UN_IN(r) | (v)))
-#define UN_BIC(r,v)	(UN_OUT((r), UN_IN(r) & ~(v)))
-
-/* Uninorth variant:
- *
- * 0 = not uninorth
- * 1 = U1.x or U2.x
- * 3 = U3
- * 4 = U4
- */
-extern int pmac_get_uninorth_variant(void);
-
-#endif /* __ASM_POWERPC_PMAC_FEATURE_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h
deleted file mode 100644
index 131011bd7e76..000000000000
--- a/include/asm-powerpc/pmac_low_i2c.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* 
- *  include/asm-ppc/pmac_low_i2c.h
- *
- *  Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#ifndef __PMAC_LOW_I2C_H__
-#define __PMAC_LOW_I2C_H__
-#ifdef __KERNEL__
-
-/* i2c mode (based on the platform functions format) */
-enum {
-	pmac_i2c_mode_dumb	= 1,
-	pmac_i2c_mode_std	= 2,
-	pmac_i2c_mode_stdsub	= 3,
-	pmac_i2c_mode_combined	= 4,
-};
-
-/* RW bit in address */
-enum {
-	pmac_i2c_read		= 0x01,
-	pmac_i2c_write		= 0x00
-};
-
-/* i2c bus type */
-enum {
-	pmac_i2c_bus_keywest	= 0,
-	pmac_i2c_bus_pmu	= 1,
-	pmac_i2c_bus_smu	= 2,
-};
-
-/* i2c bus features */
-enum {
-	/* can_largesub : supports >1 byte subaddresses (SMU only) */
-	pmac_i2c_can_largesub	= 0x00000001u,
-
-	/* multibus : device node holds multiple busses, bus number is
-	 * encoded in bits 0xff00 of "reg" of a given device
-	 */
-	pmac_i2c_multibus	= 0x00000002u,
-};
-
-/* i2c busses in the system */
-struct pmac_i2c_bus;
-struct i2c_adapter;
-
-/* Init, called early during boot */
-extern int pmac_i2c_init(void);
-
-/* Lookup an i2c bus for a device-node. The node can be either the bus
- * node itself or a device below it. In the case of a multibus, the bus
- * node itself is the controller node, else, it's a child of the controller
- * node
- */
-extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node);
-
-/* Get the address for an i2c device. This strips the bus number if
- * necessary. The 7 bits address is returned 1 bit right shifted so that the
- * direction can be directly ored in
- */
-extern u8 pmac_i2c_get_dev_addr(struct device_node *device);
-
-/* Get infos about a bus */
-extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus);
-extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
-
-/* i2c layer adapter attach/detach */
-extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
-				    struct i2c_adapter *adapter);
-extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
-				    struct i2c_adapter *adapter);
-extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
-extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
-
-/* March a device or bus with an i2c adapter structure, to be used by drivers
- * to match device-tree nodes with i2c adapters during adapter discovery
- * callbacks
- */
-extern int pmac_i2c_match_adapter(struct device_node *dev,
-				  struct i2c_adapter *adapter);
-
-
-/* (legacy) Locking functions exposed to i2c-keywest */
-extern int pmac_low_i2c_lock(struct device_node *np);
-extern int pmac_low_i2c_unlock(struct device_node *np);
-
-/* Access functions for platform code */
-extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled);
-extern void pmac_i2c_close(struct pmac_i2c_bus *bus);
-extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode);
-extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
-			 u32 subaddr, u8 *data,  int len);
-
-/* Suspend/resume code called by via-pmu directly for now */
-extern void pmac_pfunc_i2c_suspend(void);
-extern void pmac_pfunc_i2c_resume(void);
-
-#endif /* __KERNEL__ */
-#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/include/asm-powerpc/pmac_pfunc.h b/include/asm-powerpc/pmac_pfunc.h
deleted file mode 100644
index 1330d6a58c57..000000000000
--- a/include/asm-powerpc/pmac_pfunc.h
+++ /dev/null
@@ -1,252 +0,0 @@
-#ifndef __PMAC_PFUNC_H__
-#define __PMAC_PFUNC_H__
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-/* Flags in command lists */
-#define PMF_FLAGS_ON_INIT		0x80000000u
-#define PMF_FLGAS_ON_TERM		0x40000000u
-#define PMF_FLAGS_ON_SLEEP		0x20000000u
-#define PMF_FLAGS_ON_WAKE		0x10000000u
-#define PMF_FLAGS_ON_DEMAND		0x08000000u
-#define PMF_FLAGS_INT_GEN		0x04000000u
-#define PMF_FLAGS_HIGH_SPEED		0x02000000u
-#define PMF_FLAGS_LOW_SPEED		0x01000000u
-#define PMF_FLAGS_SIDE_EFFECTS		0x00800000u
-
-/*
- * Arguments to a platform function call.
- *
- * NOTE: By convention, pointer arguments point to an u32
- */
-struct pmf_args {
-	union {
-		u32 v;
-		u32 *p;
-	} u[4];
-	unsigned int count;
-};
-
-/*
- * A driver capable of interpreting commands provides a handlers
- * structure filled with whatever handlers are implemented by this
- * driver. Non implemented handlers are left NULL.
- *
- * PMF_STD_ARGS are the same arguments that are passed to the parser
- * and that gets passed back to the various handlers.
- *
- * Interpreting a given function always start with a begin() call which
- * returns an instance data to be passed around subsequent calls, and
- * ends with an end() call. This allows the low level driver to implement
- * locking policy or per-function instance data.
- *
- * For interrupt capable functions, irq_enable() is called when a client
- * registers, and irq_disable() is called when the last client unregisters
- * Note that irq_enable & irq_disable are called within a semaphore held
- * by the core, thus you should not try to register yourself to some other
- * pmf interrupt during those calls.
- */
-
-#define PMF_STD_ARGS	struct pmf_function *func, void *instdata, \
-		        struct pmf_args *args
-
-struct pmf_function;
-
-struct pmf_handlers {
-	void * (*begin)(struct pmf_function *func, struct pmf_args *args);
-	void (*end)(struct pmf_function *func, void *instdata);
-
-	int (*irq_enable)(struct pmf_function *func);
-	int (*irq_disable)(struct pmf_function *func);
-
-	int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask);
-	int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor);
-
-	int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
-	int (*read_reg32)(PMF_STD_ARGS, u32 offset);
-	int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
-	int (*read_reg16)(PMF_STD_ARGS, u32 offset);
-	int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
-	int (*read_reg8)(PMF_STD_ARGS, u32 offset);
-
-	int (*delay)(PMF_STD_ARGS, u32 duration);
-
-	int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
-	int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
-	int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
-
-	int (*read_i2c)(PMF_STD_ARGS, u32 len);
-	int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data);
-	int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen,
-		       const u8 *maskdata, const u8 *valuedata);
-
-	int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len);
-	int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data);
-	int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen,
-		       u32 totallen, const u8 *maskdata, const u8 *valuedata);
-
-	int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len);
-	int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data);
-	int (*set_i2c_mode)(PMF_STD_ARGS, int mode);
-	int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen,
-			   u32 totallen, const u8 *maskdata,
-			   const u8 *valuedata);
-
-	int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
-			       u32 xor);
-	int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
-			       u32 xor);
-	int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
-			      u32 xor);
-
-	int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
-	int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
-	int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
-
-	int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata,
-				const u8 *valuedata);
-
-	struct module *owner;
-};
-
-
-/*
- * Drivers who expose platform functions register at init time, this
- * causes the platform functions for that device node to be parsed in
- * advance and associated with the device. The data structures are
- * partially public so a driver can walk the list of platform functions
- * and eventually inspect the flags
- */
-struct pmf_device;
-
-struct pmf_function {
-	/* All functions for a given driver are linked */
-	struct list_head	link;
-
-	/* Function node & driver data */
-	struct device_node	*node;
-	void			*driver_data;
-
-	/* For internal use by core */
-	struct pmf_device	*dev;
-
-	/* The name is the "xxx" in "platform-do-xxx", this is how
-	 * platform functions are identified by this code. Some functions
-	 * only operate for a given target, in which case the phandle is
-	 * here (or 0 if the filter doesn't apply)
-	 */
-	const char		*name;
-	u32			phandle;
-
-	/* The flags for that function. You can have several functions
-	 * with the same name and different flag
-	 */
-	u32			flags;
-
-	/* The actual tokenized function blob */
-	const void		*data;
-	unsigned int		length;
-
-	/* Interrupt clients */
-	struct list_head	irq_clients;
-
-	/* Refcounting */
-	struct kref		ref;
-};
-
-/*
- * For platform functions that are interrupts, one can register
- * irq_client structures. You canNOT use the same structure twice
- * as it contains a link member. Also, the callback is called with
- * a spinlock held, you must not call back into any of the pmf_* functions
- * from within that callback
- */
-struct pmf_irq_client {
-	void			(*handler)(void *data);
-	void			*data;
-	struct module		*owner;
-	struct list_head	link;
-	struct pmf_function	*func;
-};
-
-
-/*
- * Register/Unregister a function-capable driver and its handlers
- */
-extern int pmf_register_driver(struct device_node *np,
-			      struct pmf_handlers *handlers,
-			      void *driverdata);
-
-extern void pmf_unregister_driver(struct device_node *np);
-
-
-/*
- * Register/Unregister interrupt clients
- */
-extern int pmf_register_irq_client(struct device_node *np,
-				   const char *name,
-				   struct pmf_irq_client *client);
-
-extern void pmf_unregister_irq_client(struct pmf_irq_client *client);
-
-/*
- * Called by the handlers when an irq happens
- */
-extern void pmf_do_irq(struct pmf_function *func);
-
-
-/*
- * Low level call to platform functions.
- *
- * The phandle can filter on the target object for functions that have
- * multiple targets, the flags allow you to restrict the call to a given
- * combination of flags.
- *
- * The args array contains as many arguments as is required by the function,
- * this is dependent on the function you are calling, unfortunately Apple
- * mechanism provides no way to encode that so you have to get it right at
- * the call site. Some functions require no args, in which case, you can
- * pass NULL.
- *
- * You can also pass NULL to the name. This will match any function that has
- * the appropriate combination of flags & phandle or you can pass 0 to the
- * phandle to match any
- */
-extern int pmf_do_functions(struct device_node *np, const char *name,
-			    u32 phandle, u32 flags, struct pmf_args *args);
-
-
-
-/*
- * High level call to a platform function.
- *
- * This one looks for the platform-xxx first so you should call it to the
- * actual target if any. It will fallback to platform-do-xxx if it can't
- * find one. It will also exclusively target functions that have
- * the "OnDemand" flag.
- */
-
-extern int pmf_call_function(struct device_node *target, const char *name,
-			     struct pmf_args *args);
-
-
-/*
- * For low latency interrupt usage, you can lookup for on-demand functions
- * using the functions below
- */
-
-extern struct pmf_function *pmf_find_function(struct device_node *target,
-					      const char *name);
-
-extern struct pmf_function * pmf_get_function(struct pmf_function *func);
-extern void pmf_put_function(struct pmf_function *func);
-
-extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args);
-
-
-/* Suspend/resume code called by via-pmu directly for now */
-extern void pmac_pfunc_base_suspend(void);
-extern void pmac_pfunc_base_resume(void);
-
-#endif /* __PMAC_PFUNC_H__ */
diff --git a/include/asm-powerpc/pmc.h b/include/asm-powerpc/pmc.h
deleted file mode 100644
index d6a616a1b3ea..000000000000
--- a/include/asm-powerpc/pmc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * pmc.h
- * Copyright (C) 2004  David Gibson, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef _POWERPC_PMC_H
-#define _POWERPC_PMC_H
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-
-typedef void (*perf_irq_t)(struct pt_regs *);
-extern perf_irq_t perf_irq;
-
-int reserve_pmc_hardware(perf_irq_t new_perf_irq);
-void release_pmc_hardware(void);
-
-#ifdef CONFIG_PPC64
-void power4_enable_pmcs(void);
-void pasemi_enable_pmcs(void);
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_PMC_H */
diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h
deleted file mode 100644
index e1dc090748df..000000000000
--- a/include/asm-powerpc/pmi.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef _POWERPC_PMI_H
-#define _POWERPC_PMI_H
-
-/*
- * Definitions for talking with PMI device on PowerPC
- *
- * PMI (Platform Management Interrupt) is a way to communicate
- * with the BMC (Baseboard Management Controller) via interrupts.
- * Unlike IPMI it is bidirectional and has a low latency.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __KERNEL__
-
-#define PMI_TYPE_FREQ_CHANGE	0x01
-#define PMI_READ_TYPE		0
-#define PMI_READ_DATA0		1
-#define PMI_READ_DATA1		2
-#define PMI_READ_DATA2		3
-#define PMI_WRITE_TYPE		4
-#define PMI_WRITE_DATA0		5
-#define PMI_WRITE_DATA1		6
-#define PMI_WRITE_DATA2		7
-
-#define PMI_ACK			0x80
-
-#define PMI_TIMEOUT		100
-
-typedef struct {
-	u8	type;
-	u8	data0;
-	u8	data1;
-	u8	data2;
-} pmi_message_t;
-
-struct pmi_handler {
-	struct list_head node;
-	u8 type;
-	void (*handle_pmi_message) (pmi_message_t);
-};
-
-int pmi_register_handler(struct pmi_handler *);
-void pmi_unregister_handler(struct pmi_handler *);
-
-int pmi_send_message(pmi_message_t);
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_PMI_H */
diff --git a/include/asm-powerpc/poll.h b/include/asm-powerpc/poll.h
deleted file mode 100644
index c98509d3149e..000000000000
--- a/include/asm-powerpc/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-powerpc/posix_types.h b/include/asm-powerpc/posix_types.h
deleted file mode 100644
index c4e396b540df..000000000000
--- a/include/asm-powerpc/posix_types.h
+++ /dev/null
@@ -1,128 +0,0 @@
-#ifndef _ASM_POWERPC_POSIX_TYPES_H
-#define _ASM_POWERPC_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned int	__kernel_mode_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef long		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef long		__kernel_suseconds_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-typedef unsigned int	__kernel_old_uid_t;
-typedef unsigned int	__kernel_old_gid_t;
-
-#ifdef __powerpc64__
-typedef unsigned long  	__kernel_nlink_t;
-typedef int             __kernel_ipc_pid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef unsigned long	__kernel_old_dev_t;
-#else
-typedef unsigned short	__kernel_nlink_t;
-typedef short		__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef unsigned int	__kernel_old_dev_t;
-#endif
-
-#ifdef __powerpc64__
-typedef long long	__kernel_loff_t;
-#else
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#ifndef __GNUC__
-
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
-#define	__FD_ZERO(set)	\
-  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
-
-#else /* __GNUC__ */
-
-#if defined(__KERNEL__)
-/* With GNU C, use inline functions instead so args are evaluated only once: */
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
-{ 
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *p)
-{
-	unsigned long *tmp = (unsigned long *)p->fds_bits;
-	int i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		      case 16:
-			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-
-		      case 8:
-			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-
-		      case 4:
-			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			return;
-		}
-	}
-	i = __FDSET_LONGS;
-	while (i) {
-		i--;
-		*tmp = 0;
-		tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) */
-#endif /* __GNUC__ */
-#endif /* _ASM_POWERPC_POSIX_TYPES_H */
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
deleted file mode 100644
index 854ab713f56c..000000000000
--- a/include/asm-powerpc/ppc-pci.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_PPC_PCI_H
-#define _ASM_POWERPC_PPC_PCI_H
-#ifdef __KERNEL__
-
-#ifdef CONFIG_PCI
-
-#include <linux/pci.h>
-#include <asm/pci-bridge.h>
-
-extern unsigned long isa_io_base;
-
-extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
-extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
-
-
-extern struct list_head hose_list;
-
-extern void find_and_init_phbs(void);
-
-extern struct pci_dev *isa_bridge_pcidev;	/* may be NULL if no ISA bus */
-
-/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
-#define BUID_HI(buid) ((buid) >> 32)
-#define BUID_LO(buid) ((buid) & 0xffffffff)
-
-/* PCI device_node operations */
-struct device_node;
-typedef void *(*traverse_func)(struct device_node *me, void *data);
-void *traverse_pci_devices(struct device_node *start, traverse_func pre,
-		void *data);
-
-extern void pci_devs_phb_init(void);
-extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-extern void scan_phb(struct pci_controller *hose);
-
-/* From rtas_pci.h */
-extern void init_pci_config_tokens (void);
-extern unsigned long get_phb_buid (struct device_node *);
-extern int rtas_setup_phb(struct pci_controller *phb);
-
-extern unsigned long pci_probe_only;
-
-/* ---- EEH internal-use-only related routines ---- */
-#ifdef CONFIG_EEH
-
-void pci_addr_cache_insert_device(struct pci_dev *dev);
-void pci_addr_cache_remove_device(struct pci_dev *dev);
-void pci_addr_cache_build(void);
-struct pci_dev *pci_get_device_by_addr(unsigned long addr);
-
-/**
- * eeh_slot_error_detail -- record and EEH error condition to the log
- * @pdn:      pci device node
- * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
- *
- * Obtains the EEH error details from the RTAS subsystem,
- * and then logs these details with the RTAS error log system.
- */
-#define EEH_LOG_TEMP_FAILURE 1
-#define EEH_LOG_PERM_FAILURE 2
-void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
-
-/**
- * rtas_pci_enable - enable IO transfers for this slot
- * @pdn:       pci device node
- * @function:  either EEH_THAW_MMIO or EEH_THAW_DMA 
- *
- * Enable I/O transfers to this slot 
- */
-#define EEH_THAW_MMIO 2
-#define EEH_THAW_DMA  3
-int rtas_pci_enable(struct pci_dn *pdn, int function);
-
-/**
- * rtas_set_slot_reset -- unfreeze a frozen slot
- * @pdn:       pci device node
- *
- * Clear the EEH-frozen condition on a slot.  This routine
- * does this by asserting the PCI #RST line for 1/8th of
- * a second; this routine will sleep while the adapter is
- * being reset.
- *
- * Returns a non-zero value if the reset failed.
- */
-int rtas_set_slot_reset (struct pci_dn *);
-int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
-
-/** 
- * eeh_restore_bars - Restore device configuration info.
- * @pdn:       pci device node
- *
- * A reset of a PCI device will clear out its config space.
- * This routines will restore the config space for this
- * device, and is children, to values previously obtained
- * from the firmware.
- */
-void eeh_restore_bars(struct pci_dn *);
-
-/**
- * rtas_configure_bridge -- firmware initialization of pci bridge
- * @pdn:       pci device node
- *
- * Ask the firmware to configure all PCI bridges devices
- * located behind the indicated node. Required after a
- * pci device reset. Does essentially the same hing as
- * eeh_restore_bars, but for brdges, and lets firmware 
- * do the work.
- */
-void rtas_configure_bridge(struct pci_dn *);
-
-int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
-int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
-
-/**
- * eeh_mark_slot -- set mode flags for pertition endpoint
- * @pdn:       pci device node
- *
- * mark and clear slots: find "partition endpoint" PE and set or 
- * clear the flags for each subnode of the PE.
- */
-void eeh_mark_slot (struct device_node *dn, int mode_flag);
-void eeh_clear_slot (struct device_node *dn, int mode_flag);
-
-/**
- * find_device_pe -- Find the associated "Partiationable Endpoint" PE
- * @pdn:       pci device node
- */
-struct device_node * find_device_pe(struct device_node *dn);
-
-void eeh_sysfs_add_device(struct pci_dev *pdev);
-void eeh_sysfs_remove_device(struct pci_dev *pdev);
-
-#endif /* CONFIG_EEH */
-
-#else /* CONFIG_PCI */
-static inline void find_and_init_phbs(void) { }
-static inline void init_pci_config_tokens(void) { }
-#endif /* !CONFIG_PCI */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_PPC_PCI_H */
diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h
deleted file mode 100644
index 033039a80c42..000000000000
--- a/include/asm-powerpc/ppc4xx.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * PPC4xx Prototypes and definitions
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_POWERPC_PPC4xx_H__
-#define __ASM_POWERPC_PPC4xx_H__
-
-extern void ppc4xx_reset_system(char *cmd);
-
-#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h
deleted file mode 100644
index 0966899d974b..000000000000
--- a/include/asm-powerpc/ppc_asm.h
+++ /dev/null
@@ -1,689 +0,0 @@
-/*
- * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
- */
-#ifndef _ASM_POWERPC_PPC_ASM_H
-#define _ASM_POWERPC_PPC_ASM_H
-
-#include <linux/stringify.h>
-#include <asm/asm-compat.h>
-#include <asm/processor.h>
-
-#ifndef __ASSEMBLY__
-#error __FILE__ should only be used in assembler files
-#else
-
-#define SZL			(BITS_PER_LONG/8)
-
-/*
- * Stuff for accurate CPU time accounting.
- * These macros handle transitions between user and system state
- * in exception entry and exit and accumulate time to the
- * user_time and system_time fields in the paca.
- */
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
-#define ACCOUNT_CPU_USER_EXIT(ra, rb)
-#else
-#define ACCOUNT_CPU_USER_ENTRY(ra, rb)					\
-	beq	2f;			/* if from kernel mode */	\
-BEGIN_FTR_SECTION;							\
-	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
-BEGIN_FTR_SECTION;							\
-	MFTB(ra);			/* or get TB if no PURR */	\
-END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
-	ld	rb,PACA_STARTPURR(r13);					\
-	std	ra,PACA_STARTPURR(r13);					\
-	subf	rb,rb,ra;		/* subtract start value */	\
-	ld	ra,PACA_USER_TIME(r13);					\
-	add	ra,ra,rb;		/* add on to user time */	\
-	std	ra,PACA_USER_TIME(r13);					\
-2:
-
-#define ACCOUNT_CPU_USER_EXIT(ra, rb)					\
-BEGIN_FTR_SECTION;							\
-	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
-BEGIN_FTR_SECTION;							\
-	MFTB(ra);			/* or get TB if no PURR */	\
-END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
-	ld	rb,PACA_STARTPURR(r13);					\
-	std	ra,PACA_STARTPURR(r13);					\
-	subf	rb,rb,ra;		/* subtract start value */	\
-	ld	ra,PACA_SYSTEM_TIME(r13);				\
-	add	ra,ra,rb;		/* add on to user time */	\
-	std	ra,PACA_SYSTEM_TIME(r13);
-#endif
-
-/*
- * Macros for storing registers into and loading registers from
- * exception frames.
- */
-#ifdef __powerpc64__
-#define SAVE_GPR(n, base)	std	n,GPR0+8*(n)(base)
-#define REST_GPR(n, base)	ld	n,GPR0+8*(n)(base)
-#define SAVE_NVGPRS(base)	SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
-#define REST_NVGPRS(base)	REST_8GPRS(14, base); REST_10GPRS(22, base)
-#else
-#define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
-#define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
-#define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
-				SAVE_10GPRS(22, base)
-#define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
-				REST_10GPRS(22, base)
-#endif
-
-/*
- * Define what the VSX XX1 form instructions will look like, then add
- * the 128 bit load store instructions based on that.
- */
-#define VSX_XX1(xs, ra, rb)	(((xs) & 0x1f) << 21 | ((ra) << 16) |  \
-				 ((rb) << 11) | (((xs) >> 5)))
-
-#define STXVD2X(xs, ra, rb)	.long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
-#define LXVD2X(xs, ra, rb)	.long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
-
-#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
-#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
-#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
-#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
-#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
-#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
-#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
-#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
-
-#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
-#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
-#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
-#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
-#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
-#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
-#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
-#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
-#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
-#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
-#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
-#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
-
-#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
-#define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
-#define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
-#define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
-#define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
-#define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
-#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
-#define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
-#define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
-#define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
-#define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
-#define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
-
-/* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
-#define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
-#define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
-#define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
-#define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
-#define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
-#define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
-#define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
-#define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
-#define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
-#define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
-/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
-#define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
-#define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
-#define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
-#define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
-#define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
-#define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
-#define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
-#define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
-#define REST_16VSRSU(n,b,base)	REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
-#define REST_32VSRSU(n,b,base)	REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
-
-#define SAVE_EVR(n,s,base)	evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
-#define SAVE_2EVRS(n,s,base)	SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
-#define SAVE_4EVRS(n,s,base)	SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base)
-#define SAVE_8EVRS(n,s,base)	SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base)
-#define SAVE_16EVRS(n,s,base)	SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base)
-#define SAVE_32EVRS(n,s,base)	SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base)
-#define REST_EVR(n,s,base)	lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
-#define REST_2EVRS(n,s,base)	REST_EVR(n,s,base); REST_EVR(n+1,s,base)
-#define REST_4EVRS(n,s,base)	REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base)
-#define REST_8EVRS(n,s,base)	REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base)
-#define REST_16EVRS(n,s,base)	REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base)
-#define REST_32EVRS(n,s,base)	REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base)
-
-/* Macros to adjust thread priority for hardware multithreading */
-#define HMT_VERY_LOW	or	31,31,31	# very low priority
-#define HMT_LOW		or	1,1,1
-#define HMT_MEDIUM_LOW  or	6,6,6		# medium low priority
-#define HMT_MEDIUM	or	2,2,2
-#define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
-#define HMT_HIGH	or	3,3,3
-
-/* handle instructions that older assemblers may not know */
-#define RFCI		.long 0x4c000066	/* rfci instruction */
-#define RFDI		.long 0x4c00004e	/* rfdi instruction */
-#define RFMCI		.long 0x4c00004c	/* rfmci instruction */
-
-#ifdef __KERNEL__
-#ifdef CONFIG_PPC64
-
-#define XGLUE(a,b) a##b
-#define GLUE(a,b) XGLUE(a,b)
-
-#define _GLOBAL(name) \
-	.section ".text"; \
-	.align 2 ; \
-	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _INIT_GLOBAL(name) \
-	.section ".text.init.refok"; \
-	.align 2 ; \
-	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _KPROBE(name) \
-	.section ".kprobes.text","a"; \
-	.align 2 ; \
-	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _STATIC(name) \
-	.section ".text"; \
-	.align 2 ; \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#define _INIT_STATIC(name) \
-	.section ".text.init.refok"; \
-	.align 2 ; \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
-
-#else /* 32-bit */
-
-#define _ENTRY(n)	\
-	.globl n;	\
-n:
-
-#define _GLOBAL(n)	\
-	.text;		\
-	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
-	.globl n;	\
-n:
-
-#define _KPROBE(n)	\
-	.section ".kprobes.text","a";	\
-	.globl	n;	\
-n:
-
-#endif
-
-/* 
- * LOAD_REG_IMMEDIATE(rn, expr)
- *   Loads the value of the constant expression 'expr' into register 'rn'
- *   using immediate instructions only.  Use this when it's important not
- *   to reference other data (i.e. on ppc64 when the TOC pointer is not
- *   valid).
- *
- * LOAD_REG_ADDR(rn, name)
- *   Loads the address of label 'name' into register 'rn'.  Use this when
- *   you don't particularly need immediate instructions only, but you need
- *   the whole address in one register (e.g. it's a structure address and
- *   you want to access various offsets within it).  On ppc32 this is
- *   identical to LOAD_REG_IMMEDIATE.
- *
- * LOAD_REG_ADDRBASE(rn, name)
- * ADDROFF(name)
- *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
- *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
- *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
- *   in size, so is suitable for use directly as an offset in load and store
- *   instructions.  Use this when loading/storing a single word or less as:
- *      LOAD_REG_ADDRBASE(rX, name)
- *      ld	rY,ADDROFF(name)(rX)
- */
-#ifdef __powerpc64__
-#define LOAD_REG_IMMEDIATE(reg,expr)		\
-	lis     (reg),(expr)@highest;		\
-	ori     (reg),(reg),(expr)@higher;	\
-	rldicr  (reg),(reg),32,31;		\
-	oris    (reg),(reg),(expr)@h;		\
-	ori     (reg),(reg),(expr)@l;
-
-#define LOAD_REG_ADDR(reg,name)			\
-	ld	(reg),name@got(r2)
-
-#define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
-#define ADDROFF(name)			0
-
-/* offsets for stack frame layout */
-#define LRSAVE	16
-
-#else /* 32-bit */
-
-#define LOAD_REG_IMMEDIATE(reg,expr)		\
-	lis	(reg),(expr)@ha;		\
-	addi	(reg),(reg),(expr)@l;
-
-#define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE(reg, name)
-
-#define LOAD_REG_ADDRBASE(reg, name)	lis	(reg),name@ha
-#define ADDROFF(name)			name@l
-
-/* offsets for stack frame layout */
-#define LRSAVE	4
-
-#endif
-
-/* various errata or part fixups */
-#ifdef CONFIG_PPC601_SYNC_FIX
-#define SYNC				\
-BEGIN_FTR_SECTION			\
-	sync;				\
-	isync;				\
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-#define SYNC_601			\
-BEGIN_FTR_SECTION			\
-	sync;				\
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-#define ISYNC_601			\
-BEGIN_FTR_SECTION			\
-	isync;				\
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-#else
-#define	SYNC
-#define SYNC_601
-#define ISYNC_601
-#endif
-
-#ifdef CONFIG_PPC_CELL
-#define MFTB(dest)			\
-90:	mftb  dest;			\
-BEGIN_FTR_SECTION_NESTED(96);		\
-	cmpwi dest,0;			\
-	beq-  90b;			\
-END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
-#else
-#define MFTB(dest)			mftb dest
-#endif
-
-#ifndef CONFIG_SMP
-#define TLBSYNC
-#else /* CONFIG_SMP */
-/* tlbsync is not implemented on 601 */
-#define TLBSYNC				\
-BEGIN_FTR_SECTION			\
-	tlbsync;			\
-	sync;				\
-END_FTR_SECTION_IFCLR(CPU_FTR_601)
-#endif
-
-	
-/*
- * This instruction is not implemented on the PPC 603 or 601; however, on
- * the 403GCX and 405GP tlbia IS defined and tlbie is not.
- * All of these instructions exist in the 8xx, they have magical powers,
- * and they must be used.
- */
-
-#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
-#define tlbia					\
-	li	r4,1024;			\
-	mtctr	r4;				\
-	lis	r4,KERNELBASE@h;		\
-0:	tlbie	r4;				\
-	addi	r4,r4,0x1000;			\
-	bdnz	0b
-#endif
-
-
-#ifdef CONFIG_IBM440EP_ERR42
-#define PPC440EP_ERR42 isync
-#else
-#define PPC440EP_ERR42
-#endif
-
-
-#if defined(CONFIG_BOOKE)
-#define toreal(rd)
-#define fromreal(rd)
-
-/*
- * We use addis to ensure compatibility with the "classic" ppc versions of
- * these macros, which use rs = 0 to get the tophys offset in rd, rather than
- * converting the address in r0, and so this version has to do that too
- * (i.e. set register rd to 0 when rs == 0).
- */
-#define tophys(rd,rs)				\
-	addis	rd,rs,0
-
-#define tovirt(rd,rs)				\
-	addis	rd,rs,0
-
-#elif defined(CONFIG_PPC64)
-#define toreal(rd)		/* we can access c000... in real mode */
-#define fromreal(rd)
-
-#define tophys(rd,rs)                           \
-	clrldi	rd,rs,2
-
-#define tovirt(rd,rs)                           \
-	rotldi	rd,rs,16;			\
-	ori	rd,rd,((KERNELBASE>>48)&0xFFFF);\
-	rotldi	rd,rd,48
-#else
-/*
- * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
- * physical base address of RAM at compile time.
- */
-#define toreal(rd)	tophys(rd,rd)
-#define fromreal(rd)	tovirt(rd,rd)
-
-#define tophys(rd,rs)				\
-0:	addis	rd,rs,-KERNELBASE@h;		\
-	.section ".vtop_fixup","aw";		\
-	.align  1;				\
-	.long   0b;				\
-	.previous
-
-#define tovirt(rd,rs)				\
-0:	addis	rd,rs,KERNELBASE@h;		\
-	.section ".ptov_fixup","aw";		\
-	.align  1;				\
-	.long   0b;				\
-	.previous
-#endif
-
-#ifdef CONFIG_PPC64
-#define RFI		rfid
-#define MTMSRD(r)	mtmsrd	r
-
-#else
-#define FIX_SRR1(ra, rb)
-#ifndef CONFIG_40x
-#define	RFI		rfi
-#else
-#define RFI		rfi; b .	/* Prevent prefetch past rfi */
-#endif
-#define MTMSRD(r)	mtmsr	r
-#define CLR_TOP32(r)
-#endif
-
-#endif /* __KERNEL__ */
-
-/* The boring bits... */
-
-/* Condition Register Bit Fields */
-
-#define	cr0	0
-#define	cr1	1
-#define	cr2	2
-#define	cr3	3
-#define	cr4	4
-#define	cr5	5
-#define	cr6	6
-#define	cr7	7
-
-
-/* General Purpose Registers (GPRs) */
-
-#define	r0	0
-#define	r1	1
-#define	r2	2
-#define	r3	3
-#define	r4	4
-#define	r5	5
-#define	r6	6
-#define	r7	7
-#define	r8	8
-#define	r9	9
-#define	r10	10
-#define	r11	11
-#define	r12	12
-#define	r13	13
-#define	r14	14
-#define	r15	15
-#define	r16	16
-#define	r17	17
-#define	r18	18
-#define	r19	19
-#define	r20	20
-#define	r21	21
-#define	r22	22
-#define	r23	23
-#define	r24	24
-#define	r25	25
-#define	r26	26
-#define	r27	27
-#define	r28	28
-#define	r29	29
-#define	r30	30
-#define	r31	31
-
-
-/* Floating Point Registers (FPRs) */
-
-#define	fr0	0
-#define	fr1	1
-#define	fr2	2
-#define	fr3	3
-#define	fr4	4
-#define	fr5	5
-#define	fr6	6
-#define	fr7	7
-#define	fr8	8
-#define	fr9	9
-#define	fr10	10
-#define	fr11	11
-#define	fr12	12
-#define	fr13	13
-#define	fr14	14
-#define	fr15	15
-#define	fr16	16
-#define	fr17	17
-#define	fr18	18
-#define	fr19	19
-#define	fr20	20
-#define	fr21	21
-#define	fr22	22
-#define	fr23	23
-#define	fr24	24
-#define	fr25	25
-#define	fr26	26
-#define	fr27	27
-#define	fr28	28
-#define	fr29	29
-#define	fr30	30
-#define	fr31	31
-
-/* AltiVec Registers (VPRs) */
-
-#define	vr0	0
-#define	vr1	1
-#define	vr2	2
-#define	vr3	3
-#define	vr4	4
-#define	vr5	5
-#define	vr6	6
-#define	vr7	7
-#define	vr8	8
-#define	vr9	9
-#define	vr10	10
-#define	vr11	11
-#define	vr12	12
-#define	vr13	13
-#define	vr14	14
-#define	vr15	15
-#define	vr16	16
-#define	vr17	17
-#define	vr18	18
-#define	vr19	19
-#define	vr20	20
-#define	vr21	21
-#define	vr22	22
-#define	vr23	23
-#define	vr24	24
-#define	vr25	25
-#define	vr26	26
-#define	vr27	27
-#define	vr28	28
-#define	vr29	29
-#define	vr30	30
-#define	vr31	31
-
-/* VSX Registers (VSRs) */
-
-#define	vsr0	0
-#define	vsr1	1
-#define	vsr2	2
-#define	vsr3	3
-#define	vsr4	4
-#define	vsr5	5
-#define	vsr6	6
-#define	vsr7	7
-#define	vsr8	8
-#define	vsr9	9
-#define	vsr10	10
-#define	vsr11	11
-#define	vsr12	12
-#define	vsr13	13
-#define	vsr14	14
-#define	vsr15	15
-#define	vsr16	16
-#define	vsr17	17
-#define	vsr18	18
-#define	vsr19	19
-#define	vsr20	20
-#define	vsr21	21
-#define	vsr22	22
-#define	vsr23	23
-#define	vsr24	24
-#define	vsr25	25
-#define	vsr26	26
-#define	vsr27	27
-#define	vsr28	28
-#define	vsr29	29
-#define	vsr30	30
-#define	vsr31	31
-#define	vsr32	32
-#define	vsr33	33
-#define	vsr34	34
-#define	vsr35	35
-#define	vsr36	36
-#define	vsr37	37
-#define	vsr38	38
-#define	vsr39	39
-#define	vsr40	40
-#define	vsr41	41
-#define	vsr42	42
-#define	vsr43	43
-#define	vsr44	44
-#define	vsr45	45
-#define	vsr46	46
-#define	vsr47	47
-#define	vsr48	48
-#define	vsr49	49
-#define	vsr50	50
-#define	vsr51	51
-#define	vsr52	52
-#define	vsr53	53
-#define	vsr54	54
-#define	vsr55	55
-#define	vsr56	56
-#define	vsr57	57
-#define	vsr58	58
-#define	vsr59	59
-#define	vsr60	60
-#define	vsr61	61
-#define	vsr62	62
-#define	vsr63	63
-
-/* SPE Registers (EVPRs) */
-
-#define	evr0	0
-#define	evr1	1
-#define	evr2	2
-#define	evr3	3
-#define	evr4	4
-#define	evr5	5
-#define	evr6	6
-#define	evr7	7
-#define	evr8	8
-#define	evr9	9
-#define	evr10	10
-#define	evr11	11
-#define	evr12	12
-#define	evr13	13
-#define	evr14	14
-#define	evr15	15
-#define	evr16	16
-#define	evr17	17
-#define	evr18	18
-#define	evr19	19
-#define	evr20	20
-#define	evr21	21
-#define	evr22	22
-#define	evr23	23
-#define	evr24	24
-#define	evr25	25
-#define	evr26	26
-#define	evr27	27
-#define	evr28	28
-#define	evr29	29
-#define	evr30	30
-#define	evr31	31
-
-/* some stab codes */
-#define N_FUN	36
-#define N_RSYM	64
-#define N_SLINE	68
-#define N_SO	100
-
-#endif /*  __ASSEMBLY__ */
-
-#endif /* _ASM_POWERPC_PPC_ASM_H */
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
deleted file mode 100644
index 101ed87f7d84..000000000000
--- a/include/asm-powerpc/processor.h
+++ /dev/null
@@ -1,314 +0,0 @@
-#ifndef _ASM_POWERPC_PROCESSOR_H
-#define _ASM_POWERPC_PROCESSOR_H
-
-/*
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/reg.h>
-
-#ifdef CONFIG_VSX
-#define TS_FPRWIDTH 2
-#else
-#define TS_FPRWIDTH 1
-#endif
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-/* We do _not_ want to define new machine types at all, those must die
- * in favor of using the device-tree
- * -- BenH.
- */
-
-/* PREP sub-platform types see residual.h for these */
-#define _PREP_Motorola	0x01	/* motorola prep */
-#define _PREP_Firm	0x02	/* firmworks prep */
-#define _PREP_IBM	0x00	/* ibm prep */
-#define _PREP_Bull	0x03	/* bull prep */
-
-/* CHRP sub-platform types. These are arbitrary */
-#define _CHRP_Motorola	0x04	/* motorola chrp, the cobra */
-#define _CHRP_IBM	0x05	/* IBM chrp, the longtrail and longtrail 2 */
-#define _CHRP_Pegasos	0x06	/* Genesi/bplan's Pegasos and Pegasos2 */
-#define _CHRP_briq	0x07	/* TotalImpact's briQ */
-
-#if defined(__KERNEL__) && defined(CONFIG_PPC32)
-
-extern int _chrp_type;
-
-#ifdef CONFIG_PPC_PREP
-
-/* what kind of prep workstation we are */
-extern int _prep_type;
-
-#endif /* CONFIG_PPC_PREP */
-
-#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-/* Macros for adjusting thread priority (hardware multi-threading) */
-#define HMT_very_low()   asm volatile("or 31,31,31   # very low priority")
-#define HMT_low()	 asm volatile("or 1,1,1	     # low priority")
-#define HMT_medium_low() asm volatile("or 6,6,6      # medium low priority")
-#define HMT_medium()	 asm volatile("or 2,2,2	     # medium priority")
-#define HMT_medium_high() asm volatile("or 5,5,5      # medium high priority")
-#define HMT_high()	 asm volatile("or 3,3,3	     # high priority")
-
-#ifdef __KERNEL__
-
-extern int have_of;
-
-struct task_struct;
-void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
-void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-extern void prepare_to_copy(struct task_struct *tsk);
-
-/* Create a new kernel thread. */
-extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-extern struct task_struct *last_task_used_vsx;
-extern struct task_struct *last_task_used_spe;
-
-#ifdef CONFIG_PPC32
-
-#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
-#error User TASK_SIZE overlaps with KERNEL_START address
-#endif
-#define TASK_SIZE	(CONFIG_TASK_SIZE)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
-#endif
-
-#ifdef CONFIG_PPC64
-/* 64-bit user address space is 44-bits (16TB user VM) */
-#define TASK_SIZE_USER64 (0x0000100000000000UL)
-
-/* 
- * 32-bit user address space is 4GB - 1 page 
- * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
- */
-#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
-
-#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
-		TASK_SIZE_USER32 : TASK_SIZE_USER64)
-#define TASK_SIZE	  TASK_SIZE_OF(current)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
-#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4))
-
-#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \
-		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
-#endif
-
-#ifdef __KERNEL__
-#ifdef __powerpc64__
-
-#define STACK_TOP_USER64 TASK_SIZE_USER64
-#define STACK_TOP_USER32 TASK_SIZE_USER32
-
-#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
-		   STACK_TOP_USER32 : STACK_TOP_USER64)
-
-#define STACK_TOP_MAX STACK_TOP_USER64
-
-#else /* __powerpc64__ */
-
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-
-#endif /* __powerpc64__ */
-#endif /* __KERNEL__ */
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define TS_FPROFFSET 0
-#define TS_VSRLOWOFFSET 1
-#define TS_FPR(i) fpr[i][TS_FPROFFSET]
-
-struct thread_struct {
-	unsigned long	ksp;		/* Kernel stack pointer */
-	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
-
-#ifdef CONFIG_PPC64
-	unsigned long	ksp_vsid;
-#endif
-	struct pt_regs	*regs;		/* Pointer to saved register state */
-	mm_segment_t	fs;		/* for get_fs() validation */
-#ifdef CONFIG_PPC32
-	void		*pgdir;		/* root of page-table tree */
-#endif
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	unsigned long	dbcr0;		/* debug control register values */
-	unsigned long	dbcr1;
-#endif
-	/* FP and VSX 0-31 register set */
-	double		fpr[32][TS_FPRWIDTH];
-	struct {
-
-		unsigned int pad;
-		unsigned int val;	/* Floating point status */
-	} fpscr;
-	int		fpexc_mode;	/* floating-point exception mode */
-	unsigned int	align_ctl;	/* alignment handling control */
-#ifdef CONFIG_PPC64
-	unsigned long	start_tb;	/* Start purr when proc switched in */
-	unsigned long	accum_tb;	/* Total accumilated purr for process */
-#endif
-	unsigned long	dabr;		/* Data address breakpoint register */
-#ifdef CONFIG_ALTIVEC
-	/* Complete AltiVec register set */
-	vector128	vr[32] __attribute__((aligned(16)));
-	/* AltiVec status */
-	vector128	vscr __attribute__((aligned(16)));
-	unsigned long	vrsave;
-	int		used_vr;	/* set if process has used altivec */
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-	/* VSR status */
-	int		used_vsr;	/* set if process has used altivec */
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-	unsigned long	evr[32];	/* upper 32-bits of SPE regs */
-	u64		acc;		/* Accumulator */
-	unsigned long	spefscr;	/* SPE & eFP status */
-	int		used_spe;	/* set if process has used spe */
-#endif /* CONFIG_SPE */
-};
-
-#define ARCH_MIN_TASKALIGN 16
-
-#define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
-#define INIT_SP_LIMIT \
-	(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
-
-
-#ifdef CONFIG_PPC32
-#define INIT_THREAD { \
-	.ksp = INIT_SP, \
-	.ksp_limit = INIT_SP_LIMIT, \
-	.fs = KERNEL_DS, \
-	.pgdir = swapper_pg_dir, \
-	.fpexc_mode = MSR_FE0 | MSR_FE1, \
-}
-#else
-#define INIT_THREAD  { \
-	.ksp = INIT_SP, \
-	.ksp_limit = INIT_SP_LIMIT, \
-	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
-	.fs = KERNEL_DS, \
-	.fpr = {{0}}, \
-	.fpscr = { .val = 0, }, \
-	.fpexc_mode = 0, \
-}
-#endif
-
-/*
- * Return saved PC of a blocked thread. For now, this is the "user" PC
- */
-#define thread_saved_pc(tsk)    \
-        ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
-
-#define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.regs)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
-#define KSTK_ESP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
-
-/* Get/set floating-point exception mode */
-#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr))
-#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val))
-
-extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
-extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
-
-#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr))
-#define SET_ENDIAN(tsk, val) set_endian((tsk), (val))
-
-extern int get_endian(struct task_struct *tsk, unsigned long adr);
-extern int set_endian(struct task_struct *tsk, unsigned int val);
-
-#define GET_UNALIGN_CTL(tsk, adr)	get_unalign_ctl((tsk), (adr))
-#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
-
-extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
-extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
-
-static inline unsigned int __unpack_fe01(unsigned long msr_bits)
-{
-	return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
-}
-
-static inline unsigned long __pack_fe01(unsigned int fpmode)
-{
-	return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
-}
-
-#ifdef CONFIG_PPC64
-#define cpu_relax()	do { HMT_low(); HMT_medium(); barrier(); } while (0)
-#else
-#define cpu_relax()	barrier()
-#endif
-
-/* Check that a certain kernel stack pointer is valid in task_struct p */
-int validate_sp(unsigned long sp, struct task_struct *p,
-                       unsigned long nbytes);
-
-/*
- * Prefetch macros.
- */
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-static inline void prefetch(const void *x)
-{
-	if (unlikely(!x))
-		return;
-
-	__asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
-}
-
-static inline void prefetchw(const void *x)
-{
-	if (unlikely(!x))
-		return;
-
-	__asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
-}
-
-#define spin_lock_prefetch(x)	prefetchw(x)
-
-#ifdef CONFIG_PPC64
-#define HAVE_ARCH_PICK_MMAP_LAYOUT
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
deleted file mode 100644
index eb3bd2e1c7f6..000000000000
--- a/include/asm-powerpc/prom.h
+++ /dev/null
@@ -1,356 +0,0 @@
-#ifndef _POWERPC_PROM_H
-#define _POWERPC_PROM_H
-#ifdef __KERNEL__
-
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/platform_device.h>
-#include <asm/irq.h>
-#include <asm/atomic.h>
-
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
-
-#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
-#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
-#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
-
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed	/* marker */
-#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
-#define OF_DT_END_NODE		0x2		/* End node */
-#define OF_DT_PROP		0x3		/* Property: name off, size,
-						 * content */
-#define OF_DT_NOP		0x4		/* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
-/*
- * This is what gets passed to the kernel by prom_init or kexec
- *
- * The dt struct contains the device tree structure, full pathes and
- * property contents. The dt strings contain a separate block with just
- * the strings for the property names, and is fully page aligned and
- * self contained in a page, so that it can be kept around by the kernel,
- * each property name appears only once in this page (cheap compression)
- *
- * the mem_rsvmap contains a map of reserved ranges of physical memory,
- * passing it here instead of in the device-tree itself greatly simplifies
- * the job of everybody. It's just a list of u64 pairs (base/size) that
- * ends when size is 0
- */
-struct boot_param_header
-{
-	u32	magic;			/* magic word OF_DT_HEADER */
-	u32	totalsize;		/* total size of DT block */
-	u32	off_dt_struct;		/* offset to structure */
-	u32	off_dt_strings;		/* offset to strings */
-	u32	off_mem_rsvmap;		/* offset to memory reserve map */
-	u32	version;		/* format version */
-	u32	last_comp_version;	/* last compatible version */
-	/* version 2 fields below */
-	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
-	/* version 3 fields below */
-	u32	dt_strings_size;	/* size of the DT strings block */
-	/* version 17 fields below */
-	u32	dt_struct_size;		/* size of the DT structure block */
-};
-
-
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-};
-
-struct device_node {
-	const char *name;
-	const char *type;
-	phandle	node;
-	phandle linux_phandle;
-	char	*full_name;
-
-	struct	property *properties;
-	struct  property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next;	/* next device of same type */
-	struct	device_node *allnext;	/* next in list of all nodes */
-	struct  proc_dir_entry *pde;	/* this node's proc directory */
-	struct  kref kref;
-	unsigned long _flags;
-	void	*data;
-};
-
-extern struct device_node *of_chosen;
-
-static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
-{
-	return test_bit(flag, &n->_flags);
-}
-
-static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
-{
-	set_bit(flag, &n->_flags);
-}
-
-
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
-static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->pde = de;
-}
-
-
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-
-/* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
-					    const char *uname, int depth,
-					    void *data),
-				  void *data);
-extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
-					unsigned long *size);
-extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
-
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
-/* Other Prototypes */
-extern void finish_device_tree(void);
-extern void unflatten_device_tree(void);
-extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node* np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-				struct property *newprop,
-				struct property *oldprop);
-
-#ifdef CONFIG_PPC32
-/*
- * PCI <-> OF matching functions
- * (XXX should these be here?)
- */
-struct pci_bus;
-struct pci_dev;
-extern int pci_device_from_OF_node(struct device_node *node,
-				   u8* bus, u8* devfn);
-extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
-extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
-extern void pci_create_OF_bus_map(void);
-#endif
-
-extern struct resource *request_OF_resource(struct device_node* node,
-				int index, const char* name_postfix);
-extern int release_OF_resource(struct device_node* node, int index);
-
-
-/*
- * OF address retreival & translation
- */
-
-
-/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-/* Like of_read_number, but we want an unsigned long result */
-#ifdef CONFIG_PPC32
-static inline unsigned long of_read_ulong(const u32 *cell, int size)
-{
-	return cell[size-1];
-}
-#else
-#define of_read_ulong(cell, size)	of_read_number(cell, size)
-#endif
-
-/* Translate an OF address block into a CPU physical address
- */
-extern u64 of_translate_address(struct device_node *np, const u32 *addr);
-
-/* Translate a DMA address from device space to CPU space */
-extern u64 of_translate_dma_address(struct device_node *dev,
-				    const u32 *in_addr);
-
-/* Extract an address from a device, returns the region size and
- * the address space flags too. The PCI version uses a BAR number
- * instead of an absolute index
- */
-extern const u32 *of_get_address(struct device_node *dev, int index,
-			   u64 *size, unsigned int *flags);
-#ifdef CONFIG_PCI
-extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
-			       u64 *size, unsigned int *flags);
-#else
-static inline const u32 *of_get_pci_address(struct device_node *dev,
-		int bar_no, u64 *size, unsigned int *flags)
-{
-	return NULL;
-}
-#endif /* CONFIG_PCI */
-
-/* Get an address as a resource. Note that if your address is
- * a PIO address, the conversion will fail if the physical address
- * can't be internally converted to an IO token with
- * pci_address_to_pio(), that is because it's either called to early
- * or it can't be matched to any host bridge IO space
- */
-extern int of_address_to_resource(struct device_node *dev, int index,
-				  struct resource *r);
-#ifdef CONFIG_PCI
-extern int of_pci_address_to_resource(struct device_node *dev, int bar,
-				      struct resource *r);
-#else
-static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
-		struct resource *r)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_PCI */
-
-/* Parse the ibm,dma-window property of an OF node into the busno, phys and
- * size parameters.
- */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size);
-
-extern void kdump_move_device_tree(void);
-
-/* CPU OF node matching */
-struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
-
-/* Get the MAC address */
-extern const void *of_get_mac_address(struct device_node *np);
-
-/*
- * OF interrupt mapping
- */
-
-/* This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-
-#define OF_MAX_IRQ_SPEC		 4 /* We handle specifiers of at most 4 cells */
-
-struct of_irq {
-	struct device_node *controller;	/* Interrupt controller node */
-	u32 size;			/* Specifier size */
-	u32 specifier[OF_MAX_IRQ_SPEC];	/* Specifier copy */
-};
-
-/**
- * of_irq_map_init - Initialize the irq remapper
- * @flags:	flags defining workarounds to enable
- *
- * Some machines have bugs in the device-tree which require certain workarounds
- * to be applied. Call this before any interrupt mapping attempts to enable
- * those workarounds.
- */
-#define OF_IMAP_OLDWORLD_MAC	0x00000001
-#define OF_IMAP_NO_PHANDLE	0x00000002
-
-extern void of_irq_map_init(unsigned int flags);
-
-/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent:	the device interrupt parent
- * @intspec:	interrupt specifier ("interrupts" property of the device)
- * @ointsize:   size of the passed in interrupt specifier
- * @addr:	address specifier (start of "reg" property of the device)
- * @out_irq:	structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
-			  u32 ointsize, const u32 *addr,
-			  struct of_irq *out_irq);
-
-
-/**
- * of_irq_map_one - Resolve an interrupt for a device
- * @device:	the device whose interrupt is to be resolved
- * @index:     	index of the interrupt to resolve
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_map_raw().
- * It also implements the workarounds for OldWolrd Macs.
- */
-extern int of_irq_map_one(struct device_node *device, int index,
-			  struct of_irq *out_irq);
-
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:	the device whose interrupt is to be resolved
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
-extern int of_irq_to_resource(struct device_node *dev, int index,
-			struct resource *r);
-
-/**
- * of_iomap - Maps the memory mapped IO for a given device_node
- * @device:	the device whose io range will be mapped
- * @index:	index of the io range
- *
- * Returns a pointer to the mapped memory
- */
-extern void __iomem *of_iomap(struct device_node *device, int index);
-
-/*
- * NB:  This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_PROM_H */
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
deleted file mode 100644
index 81ffe3b3c1ce..000000000000
--- a/include/asm-powerpc/ps3.h
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- *  PS3 platform declarations.
- *
- *  Copyright (C) 2006 Sony Computer Entertainment Inc.
- *  Copyright 2006 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(_ASM_POWERPC_PS3_H)
-#define _ASM_POWERPC_PS3_H
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/device.h>
-#include "cell-pmu.h"
-
-union ps3_firmware_version {
-	u64 raw;
-	struct {
-		u16 pad;
-		u16 major;
-		u16 minor;
-		u16 rev;
-	};
-};
-
-void ps3_get_firmware_version(union ps3_firmware_version *v);
-int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev);
-
-/* 'Other OS' area */
-
-enum ps3_param_av_multi_out {
-	PS3_PARAM_AV_MULTI_OUT_NTSC = 0,
-	PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1,
-	PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2,
-	PS3_PARAM_AV_MULTI_OUT_SECAM = 3,
-};
-
-enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
-
-/* dma routines */
-
-enum ps3_dma_page_size {
-	PS3_DMA_4K = 12U,
-	PS3_DMA_64K = 16U,
-	PS3_DMA_1M = 20U,
-	PS3_DMA_16M = 24U,
-};
-
-enum ps3_dma_region_type {
-	PS3_DMA_OTHER = 0,
-	PS3_DMA_INTERNAL = 2,
-};
-
-struct ps3_dma_region_ops;
-
-/**
- * struct ps3_dma_region - A per device dma state variables structure
- * @did: The HV device id.
- * @page_size: The ioc pagesize.
- * @region_type: The HV region type.
- * @bus_addr: The 'translated' bus address of the region.
- * @len: The length in bytes of the region.
- * @offset: The offset from the start of memory of the region.
- * @ioid: The IOID of the device who owns this region
- * @chunk_list: Opaque variable used by the ioc page manager.
- * @region_ops: struct ps3_dma_region_ops - dma region operations
- */
-
-struct ps3_dma_region {
-	struct ps3_system_bus_device *dev;
-	/* device variables */
-	const struct ps3_dma_region_ops *region_ops;
-	unsigned char ioid;
-	enum ps3_dma_page_size page_size;
-	enum ps3_dma_region_type region_type;
-	unsigned long len;
-	unsigned long offset;
-
-	/* driver variables  (set by ps3_dma_region_create) */
-	unsigned long bus_addr;
-	struct {
-		spinlock_t lock;
-		struct list_head head;
-	} chunk_list;
-};
-
-struct ps3_dma_region_ops {
-	int (*create)(struct ps3_dma_region *);
-	int (*free)(struct ps3_dma_region *);
-	int (*map)(struct ps3_dma_region *,
-		   unsigned long virt_addr,
-		   unsigned long len,
-		   unsigned long *bus_addr,
-		   u64 iopte_pp);
-	int (*unmap)(struct ps3_dma_region *,
-		     unsigned long bus_addr,
-		     unsigned long len);
-};
-/**
- * struct ps3_dma_region_init - Helper to initialize structure variables
- *
- * Helper to properly initialize variables prior to calling
- * ps3_system_bus_device_register.
- */
-
-struct ps3_system_bus_device;
-
-int ps3_dma_region_init(struct ps3_system_bus_device *dev,
-	struct ps3_dma_region *r, enum ps3_dma_page_size page_size,
-	enum ps3_dma_region_type region_type, void *addr, unsigned long len);
-int ps3_dma_region_create(struct ps3_dma_region *r);
-int ps3_dma_region_free(struct ps3_dma_region *r);
-int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
-	unsigned long len, unsigned long *bus_addr,
-	u64 iopte_pp);
-int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
-	unsigned long len);
-
-/* mmio routines */
-
-enum ps3_mmio_page_size {
-	PS3_MMIO_4K = 12U,
-	PS3_MMIO_64K = 16U
-};
-
-struct ps3_mmio_region_ops;
-/**
- * struct ps3_mmio_region - a per device mmio state variables structure
- *
- * Current systems can be supported with a single region per device.
- */
-
-struct ps3_mmio_region {
-	struct ps3_system_bus_device *dev;
-	const struct ps3_mmio_region_ops *mmio_ops;
-	unsigned long bus_addr;
-	unsigned long len;
-	enum ps3_mmio_page_size page_size;
-	unsigned long lpar_addr;
-};
-
-struct ps3_mmio_region_ops {
-	int (*create)(struct ps3_mmio_region *);
-	int (*free)(struct ps3_mmio_region *);
-};
-/**
- * struct ps3_mmio_region_init - Helper to initialize structure variables
- *
- * Helper to properly initialize variables prior to calling
- * ps3_system_bus_device_register.
- */
-
-int ps3_mmio_region_init(struct ps3_system_bus_device *dev,
-	struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len,
-	enum ps3_mmio_page_size page_size);
-int ps3_mmio_region_create(struct ps3_mmio_region *r);
-int ps3_free_mmio_region(struct ps3_mmio_region *r);
-unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr);
-
-/* inrerrupt routines */
-
-enum ps3_cpu_binding {
-	PS3_BINDING_CPU_ANY = -1,
-	PS3_BINDING_CPU_0 = 0,
-	PS3_BINDING_CPU_1 = 1,
-};
-
-int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
-	unsigned int *virq);
-int ps3_irq_plug_destroy(unsigned int virq);
-int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq);
-int ps3_event_receive_port_destroy(unsigned int virq);
-int ps3_send_event_locally(unsigned int virq);
-
-int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
-	unsigned int *virq);
-int ps3_io_irq_destroy(unsigned int virq);
-int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
-	unsigned int *virq);
-int ps3_vuart_irq_destroy(unsigned int virq);
-int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
-	unsigned int class, unsigned int *virq);
-int ps3_spe_irq_destroy(unsigned int virq);
-
-int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
-	enum ps3_cpu_binding cpu, unsigned int *virq);
-int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
-	unsigned int virq);
-
-/* lv1 result codes */
-
-enum lv1_result {
-	LV1_SUCCESS                     = 0,
-	/* not used                       -1 */
-	LV1_RESOURCE_SHORTAGE           = -2,
-	LV1_NO_PRIVILEGE                = -3,
-	LV1_DENIED_BY_POLICY            = -4,
-	LV1_ACCESS_VIOLATION            = -5,
-	LV1_NO_ENTRY                    = -6,
-	LV1_DUPLICATE_ENTRY             = -7,
-	LV1_TYPE_MISMATCH               = -8,
-	LV1_BUSY                        = -9,
-	LV1_EMPTY                       = -10,
-	LV1_WRONG_STATE                 = -11,
-	/* not used                       -12 */
-	LV1_NO_MATCH                    = -13,
-	LV1_ALREADY_CONNECTED           = -14,
-	LV1_UNSUPPORTED_PARAMETER_VALUE = -15,
-	LV1_CONDITION_NOT_SATISFIED     = -16,
-	LV1_ILLEGAL_PARAMETER_VALUE     = -17,
-	LV1_BAD_OPTION                  = -18,
-	LV1_IMPLEMENTATION_LIMITATION   = -19,
-	LV1_NOT_IMPLEMENTED             = -20,
-	LV1_INVALID_CLASS_ID            = -21,
-	LV1_CONSTRAINT_NOT_SATISFIED    = -22,
-	LV1_ALIGNMENT_ERROR             = -23,
-	LV1_HARDWARE_ERROR              = -24,
-	LV1_INVALID_DATA_FORMAT         = -25,
-	LV1_INVALID_OPERATION           = -26,
-	LV1_INTERNAL_ERROR              = -32768,
-};
-
-static inline const char* ps3_result(int result)
-{
-#if defined(DEBUG)
-	switch (result) {
-	case LV1_SUCCESS:
-		return "LV1_SUCCESS (0)";
-	case -1:
-		return "** unknown result ** (-1)";
-	case LV1_RESOURCE_SHORTAGE:
-		return "LV1_RESOURCE_SHORTAGE (-2)";
-	case LV1_NO_PRIVILEGE:
-		return "LV1_NO_PRIVILEGE (-3)";
-	case LV1_DENIED_BY_POLICY:
-		return "LV1_DENIED_BY_POLICY (-4)";
-	case LV1_ACCESS_VIOLATION:
-		return "LV1_ACCESS_VIOLATION (-5)";
-	case LV1_NO_ENTRY:
-		return "LV1_NO_ENTRY (-6)";
-	case LV1_DUPLICATE_ENTRY:
-		return "LV1_DUPLICATE_ENTRY (-7)";
-	case LV1_TYPE_MISMATCH:
-		return "LV1_TYPE_MISMATCH (-8)";
-	case LV1_BUSY:
-		return "LV1_BUSY (-9)";
-	case LV1_EMPTY:
-		return "LV1_EMPTY (-10)";
-	case LV1_WRONG_STATE:
-		return "LV1_WRONG_STATE (-11)";
-	case -12:
-		return "** unknown result ** (-12)";
-	case LV1_NO_MATCH:
-		return "LV1_NO_MATCH (-13)";
-	case LV1_ALREADY_CONNECTED:
-		return "LV1_ALREADY_CONNECTED (-14)";
-	case LV1_UNSUPPORTED_PARAMETER_VALUE:
-		return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)";
-	case LV1_CONDITION_NOT_SATISFIED:
-		return "LV1_CONDITION_NOT_SATISFIED (-16)";
-	case LV1_ILLEGAL_PARAMETER_VALUE:
-		return "LV1_ILLEGAL_PARAMETER_VALUE (-17)";
-	case LV1_BAD_OPTION:
-		return "LV1_BAD_OPTION (-18)";
-	case LV1_IMPLEMENTATION_LIMITATION:
-		return "LV1_IMPLEMENTATION_LIMITATION (-19)";
-	case LV1_NOT_IMPLEMENTED:
-		return "LV1_NOT_IMPLEMENTED (-20)";
-	case LV1_INVALID_CLASS_ID:
-		return "LV1_INVALID_CLASS_ID (-21)";
-	case LV1_CONSTRAINT_NOT_SATISFIED:
-		return "LV1_CONSTRAINT_NOT_SATISFIED (-22)";
-	case LV1_ALIGNMENT_ERROR:
-		return "LV1_ALIGNMENT_ERROR (-23)";
-	case LV1_HARDWARE_ERROR:
-		return "LV1_HARDWARE_ERROR (-24)";
-	case LV1_INVALID_DATA_FORMAT:
-		return "LV1_INVALID_DATA_FORMAT (-25)";
-	case LV1_INVALID_OPERATION:
-		return "LV1_INVALID_OPERATION (-26)";
-	case LV1_INTERNAL_ERROR:
-		return "LV1_INTERNAL_ERROR (-32768)";
-	default:
-		BUG();
-		return "** unknown result **";
-	};
-#else
-	return "";
-#endif
-}
-
-/* system bus routines */
-
-enum ps3_match_id {
-	PS3_MATCH_ID_EHCI           = 1,
-	PS3_MATCH_ID_OHCI           = 2,
-	PS3_MATCH_ID_GELIC          = 3,
-	PS3_MATCH_ID_AV_SETTINGS    = 4,
-	PS3_MATCH_ID_SYSTEM_MANAGER = 5,
-	PS3_MATCH_ID_STOR_DISK      = 6,
-	PS3_MATCH_ID_STOR_ROM       = 7,
-	PS3_MATCH_ID_STOR_FLASH     = 8,
-	PS3_MATCH_ID_SOUND          = 9,
-	PS3_MATCH_ID_GRAPHICS       = 10,
-	PS3_MATCH_ID_LPM            = 11,
-};
-
-#define PS3_MODULE_ALIAS_EHCI           "ps3:1"
-#define PS3_MODULE_ALIAS_OHCI           "ps3:2"
-#define PS3_MODULE_ALIAS_GELIC          "ps3:3"
-#define PS3_MODULE_ALIAS_AV_SETTINGS    "ps3:4"
-#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5"
-#define PS3_MODULE_ALIAS_STOR_DISK      "ps3:6"
-#define PS3_MODULE_ALIAS_STOR_ROM       "ps3:7"
-#define PS3_MODULE_ALIAS_STOR_FLASH     "ps3:8"
-#define PS3_MODULE_ALIAS_SOUND          "ps3:9"
-#define PS3_MODULE_ALIAS_GRAPHICS       "ps3:10"
-#define PS3_MODULE_ALIAS_LPM            "ps3:11"
-
-enum ps3_system_bus_device_type {
-	PS3_DEVICE_TYPE_IOC0 = 1,
-	PS3_DEVICE_TYPE_SB,
-	PS3_DEVICE_TYPE_VUART,
-	PS3_DEVICE_TYPE_LPM,
-};
-
-/**
- * struct ps3_system_bus_device - a device on the system bus
- */
-
-struct ps3_system_bus_device {
-	enum ps3_match_id match_id;
-	enum ps3_system_bus_device_type dev_type;
-
-	u64 bus_id;                       /* SB */
-	u64 dev_id;                       /* SB */
-	unsigned int interrupt_id;        /* SB */
-	struct ps3_dma_region *d_region;  /* SB, IOC0 */
-	struct ps3_mmio_region *m_region; /* SB, IOC0*/
-	unsigned int port_number;         /* VUART */
-	struct {                          /* LPM */
-		u64 node_id;
-		u64 pu_id;
-		u64 rights;
-	} lpm;
-
-/*	struct iommu_table *iommu_table; -- waiting for BenH's cleanups */
-	struct device core;
-	void *driver_priv; /* private driver variables */
-};
-
-int ps3_open_hv_device(struct ps3_system_bus_device *dev);
-int ps3_close_hv_device(struct ps3_system_bus_device *dev);
-
-/**
- * struct ps3_system_bus_driver - a driver for a device on the system bus
- */
-
-struct ps3_system_bus_driver {
-	enum ps3_match_id match_id;
-	struct device_driver core;
-	int (*probe)(struct ps3_system_bus_device *);
-	int (*remove)(struct ps3_system_bus_device *);
-	int (*shutdown)(struct ps3_system_bus_device *);
-/*	int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */
-/*	int (*resume)(struct ps3_system_bus_device *); */
-};
-
-int ps3_system_bus_device_register(struct ps3_system_bus_device *dev);
-int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv);
-void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv);
-
-static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv(
-	struct device_driver *_drv)
-{
-	return container_of(_drv, struct ps3_system_bus_driver, core);
-}
-static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev(
-	struct device *_dev)
-{
-	return container_of(_dev, struct ps3_system_bus_device, core);
-}
-static inline struct ps3_system_bus_driver *
-	ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev)
-{
-	BUG_ON(!_dev);
-	BUG_ON(!_dev->core.driver);
-	return ps3_drv_to_system_bus_drv(_dev->core.driver);
-}
-
-/**
- * ps3_system_bus_set_drvdata -
- * @dev: device structure
- * @data: Data to set
- */
-
-static inline void ps3_system_bus_set_driver_data(
-	struct ps3_system_bus_device *dev, void *data)
-{
-	dev->core.driver_data = data;
-}
-static inline void *ps3_system_bus_get_driver_data(
-	struct ps3_system_bus_device *dev)
-{
-	return dev->core.driver_data;
-}
-
-/* These two need global scope for get_dma_ops(). */
-
-extern struct bus_type ps3_system_bus_type;
-
-/* system manager */
-
-struct ps3_sys_manager_ops {
-	struct ps3_system_bus_device *dev;
-	void (*power_off)(struct ps3_system_bus_device *dev);
-	void (*restart)(struct ps3_system_bus_device *dev);
-};
-
-void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
-void __noreturn ps3_sys_manager_power_off(void);
-void __noreturn ps3_sys_manager_restart(void);
-void __noreturn ps3_sys_manager_halt(void);
-int ps3_sys_manager_get_wol(void);
-void ps3_sys_manager_set_wol(int state);
-
-struct ps3_prealloc {
-    const char *name;
-    void *address;
-    unsigned long size;
-    unsigned long align;
-};
-
-extern struct ps3_prealloc ps3fb_videomemory;
-extern struct ps3_prealloc ps3flash_bounce_buffer;
-
-/* logical performance monitor */
-
-/**
- * enum ps3_lpm_rights - Rigths granted by the system policy module.
- *
- * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm.
- * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer.
- */
-
-enum ps3_lpm_rights {
-	PS3_LPM_RIGHTS_USE_LPM = 0x001,
-	PS3_LPM_RIGHTS_USE_TB = 0x100,
-};
-
-/**
- * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use.
- *
- * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer.
- * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer.  Must have
- *  rights @PS3_LPM_RIGHTS_USE_TB.
- */
-
-enum ps3_lpm_tb_type {
-	PS3_LPM_TB_TYPE_NONE = 0,
-	PS3_LPM_TB_TYPE_INTERNAL = 1,
-};
-
-int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
-	u64 tb_cache_size);
-int ps3_lpm_close(void);
-int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
-	unsigned long *bytes_copied);
-int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
-	unsigned long count, unsigned long *bytes_copied);
-void ps3_set_bookmark(u64 bookmark);
-void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id);
-int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit,
-	u8 bus_word);
-
-u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr);
-void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
-u32 ps3_read_ctr(u32 cpu, u32 ctr);
-void ps3_write_ctr(u32 cpu, u32 ctr, u32 val);
-
-u32 ps3_read_pm07_control(u32 cpu, u32 ctr);
-void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val);
-u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg);
-void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
-
-u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr);
-void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
-
-void ps3_enable_pm(u32 cpu);
-void ps3_disable_pm(u32 cpu);
-void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
-void ps3_disable_pm_interrupts(u32 cpu);
-
-u32 ps3_get_and_clear_pm_interrupts(u32 cpu);
-void ps3_sync_irq(int node);
-u32 ps3_get_hw_thread_id(int cpu);
-u64 ps3_get_spe_id(void *arg);
-
-#endif
diff --git a/include/asm-powerpc/ps3av.h b/include/asm-powerpc/ps3av.h
deleted file mode 100644
index fda98715cd35..000000000000
--- a/include/asm-powerpc/ps3av.h
+++ /dev/null
@@ -1,744 +0,0 @@
-/*
- *  PS3 AV backend support.
- *
- *  Copyright (C) 2007 Sony Computer Entertainment Inc.
- *  Copyright 2007 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _ASM_POWERPC_PS3AV_H_
-#define _ASM_POWERPC_PS3AV_H_
-
-/** command for ioctl() **/
-#define PS3AV_VERSION 0x205	/* version of ps3av command */
-
-#define PS3AV_CID_AV_INIT              0x00000001
-#define PS3AV_CID_AV_FIN               0x00000002
-#define PS3AV_CID_AV_GET_HW_CONF       0x00000003
-#define PS3AV_CID_AV_GET_MONITOR_INFO  0x00000004
-#define PS3AV_CID_AV_ENABLE_EVENT      0x00000006
-#define PS3AV_CID_AV_DISABLE_EVENT     0x00000007
-#define PS3AV_CID_AV_TV_MUTE           0x0000000a
-
-#define PS3AV_CID_AV_VIDEO_CS          0x00010001
-#define PS3AV_CID_AV_VIDEO_MUTE        0x00010002
-#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003
-#define PS3AV_CID_AV_AUDIO_PARAM       0x00020001
-#define PS3AV_CID_AV_AUDIO_MUTE        0x00020002
-#define PS3AV_CID_AV_HDMI_MODE         0x00040001
-
-#define PS3AV_CID_VIDEO_INIT           0x01000001
-#define PS3AV_CID_VIDEO_MODE           0x01000002
-#define PS3AV_CID_VIDEO_FORMAT         0x01000004
-#define PS3AV_CID_VIDEO_PITCH          0x01000005
-
-#define PS3AV_CID_AUDIO_INIT           0x02000001
-#define PS3AV_CID_AUDIO_MODE           0x02000002
-#define PS3AV_CID_AUDIO_MUTE           0x02000003
-#define PS3AV_CID_AUDIO_ACTIVE         0x02000004
-#define PS3AV_CID_AUDIO_INACTIVE       0x02000005
-#define PS3AV_CID_AUDIO_SPDIF_BIT      0x02000006
-#define PS3AV_CID_AUDIO_CTRL           0x02000007
-
-#define PS3AV_CID_EVENT_UNPLUGGED      0x10000001
-#define PS3AV_CID_EVENT_PLUGGED        0x10000002
-#define PS3AV_CID_EVENT_HDCP_DONE      0x10000003
-#define PS3AV_CID_EVENT_HDCP_FAIL      0x10000004
-#define PS3AV_CID_EVENT_HDCP_AUTH      0x10000005
-#define PS3AV_CID_EVENT_HDCP_ERROR     0x10000006
-
-#define PS3AV_CID_AVB_PARAM            0x04000001
-
-/* max backend ports */
-#define PS3AV_HDMI_MAX                 2	/* HDMI_0 HDMI_1 */
-#define PS3AV_AVMULTI_MAX              1	/* AVMULTI_0 */
-#define PS3AV_AV_PORT_MAX              (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX)
-#define PS3AV_OPT_PORT_MAX             1	/* SPDIF0 */
-#define PS3AV_HEAD_MAX                 2	/* HEAD_A HEAD_B */
-
-/* num of pkt for PS3AV_CID_AVB_PARAM */
-#define PS3AV_AVB_NUM_VIDEO            PS3AV_HEAD_MAX
-#define PS3AV_AVB_NUM_AUDIO            0	/* not supported */
-#define PS3AV_AVB_NUM_AV_VIDEO         PS3AV_AV_PORT_MAX
-#define PS3AV_AVB_NUM_AV_AUDIO         PS3AV_HDMI_MAX
-
-#define PS3AV_MUTE_PORT_MAX            1	/* num of ports in mute pkt */
-
-/* event_bit */
-#define PS3AV_CMD_EVENT_BIT_UNPLUGGED			(1 << 0)
-#define PS3AV_CMD_EVENT_BIT_PLUGGED			(1 << 1)
-#define PS3AV_CMD_EVENT_BIT_HDCP_DONE			(1 << 2)
-#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL			(1 << 3)
-#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH			(1 << 4)
-#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY		(1 << 5)
-
-/* common params */
-/* mute */
-#define PS3AV_CMD_MUTE_OFF				0x0000
-#define PS3AV_CMD_MUTE_ON				0x0001
-/* avport */
-#define PS3AV_CMD_AVPORT_HDMI_0				0x0000
-#define PS3AV_CMD_AVPORT_HDMI_1				0x0001
-#define PS3AV_CMD_AVPORT_AVMULTI_0			0x0010
-#define PS3AV_CMD_AVPORT_SPDIF_0			0x0020
-#define PS3AV_CMD_AVPORT_SPDIF_1			0x0021
-
-/* for av backend */
-/* av_mclk */
-#define PS3AV_CMD_AV_MCLK_128				0x0000
-#define PS3AV_CMD_AV_MCLK_256				0x0001
-#define PS3AV_CMD_AV_MCLK_512				0x0003
-/* av_inputlen */
-#define PS3AV_CMD_AV_INPUTLEN_16			0x02
-#define PS3AV_CMD_AV_INPUTLEN_20			0x0a
-#define PS3AV_CMD_AV_INPUTLEN_24			0x0b
-/* alayout */
-#define PS3AV_CMD_AV_LAYOUT_32				(1 << 0)
-#define PS3AV_CMD_AV_LAYOUT_44				(1 << 1)
-#define PS3AV_CMD_AV_LAYOUT_48				(1 << 2)
-#define PS3AV_CMD_AV_LAYOUT_88				(1 << 3)
-#define PS3AV_CMD_AV_LAYOUT_96				(1 << 4)
-#define PS3AV_CMD_AV_LAYOUT_176				(1 << 5)
-#define PS3AV_CMD_AV_LAYOUT_192				(1 << 6)
-/* hdmi_mode */
-#define PS3AV_CMD_AV_HDMI_MODE_NORMAL			0xff
-#define PS3AV_CMD_AV_HDMI_HDCP_OFF			0x01
-#define PS3AV_CMD_AV_HDMI_EDID_PASS			0x80
-#define PS3AV_CMD_AV_HDMI_DVI				0x40
-
-/* for video module */
-/* video_head */
-#define PS3AV_CMD_VIDEO_HEAD_A				0x0000
-#define PS3AV_CMD_VIDEO_HEAD_B				0x0001
-/* video_cs_out video_cs_in */
-#define PS3AV_CMD_VIDEO_CS_NONE				0x0000
-#define PS3AV_CMD_VIDEO_CS_RGB_8			0x0001
-#define PS3AV_CMD_VIDEO_CS_YUV444_8			0x0002
-#define PS3AV_CMD_VIDEO_CS_YUV422_8			0x0003
-#define PS3AV_CMD_VIDEO_CS_XVYCC_8			0x0004
-#define PS3AV_CMD_VIDEO_CS_RGB_10			0x0005
-#define PS3AV_CMD_VIDEO_CS_YUV444_10			0x0006
-#define PS3AV_CMD_VIDEO_CS_YUV422_10			0x0007
-#define PS3AV_CMD_VIDEO_CS_XVYCC_10			0x0008
-#define PS3AV_CMD_VIDEO_CS_RGB_12			0x0009
-#define PS3AV_CMD_VIDEO_CS_YUV444_12			0x000a
-#define PS3AV_CMD_VIDEO_CS_YUV422_12			0x000b
-#define PS3AV_CMD_VIDEO_CS_XVYCC_12			0x000c
-/* video_vid */
-#define PS3AV_CMD_VIDEO_VID_NONE			0x0000
-#define PS3AV_CMD_VIDEO_VID_480I			0x0001
-#define PS3AV_CMD_VIDEO_VID_576I			0x0003
-#define PS3AV_CMD_VIDEO_VID_480P			0x0005
-#define PS3AV_CMD_VIDEO_VID_576P			0x0006
-#define PS3AV_CMD_VIDEO_VID_1080I_60HZ			0x0007
-#define PS3AV_CMD_VIDEO_VID_1080I_50HZ			0x0008
-#define PS3AV_CMD_VIDEO_VID_720P_60HZ			0x0009
-#define PS3AV_CMD_VIDEO_VID_720P_50HZ			0x000a
-#define PS3AV_CMD_VIDEO_VID_1080P_60HZ			0x000b
-#define PS3AV_CMD_VIDEO_VID_1080P_50HZ			0x000c
-#define PS3AV_CMD_VIDEO_VID_WXGA			0x000d
-#define PS3AV_CMD_VIDEO_VID_SXGA			0x000e
-#define PS3AV_CMD_VIDEO_VID_WUXGA			0x000f
-#define PS3AV_CMD_VIDEO_VID_480I_A			0x0010
-/* video_format */
-#define PS3AV_CMD_VIDEO_FORMAT_BLACK			0x0000
-#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT		0x0007
-/* video_order */
-#define PS3AV_CMD_VIDEO_ORDER_RGB			0x0000
-#define PS3AV_CMD_VIDEO_ORDER_BGR			0x0001
-/* video_fmt */
-#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8			0x0000
-/* video_out_format */
-#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT		0x0000
-/* video_cl_cnv */
-#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT		0x0000
-#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT		0x0010
-/* video_sync */
-#define PS3AV_CMD_VIDEO_SYNC_VSYNC			0x0001
-#define PS3AV_CMD_VIDEO_SYNC_CSYNC			0x0004
-#define PS3AV_CMD_VIDEO_SYNC_HSYNC			0x0010
-
-/* for audio module */
-/* num_of_ch */
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_2			0x0000
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_3			0x0001
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_4			0x0002
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_5			0x0003
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_6			0x0004
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_7			0x0005
-#define PS3AV_CMD_AUDIO_NUM_OF_CH_8			0x0006
-/* audio_fs */
-#define PS3AV_CMD_AUDIO_FS_32K				0x0001
-#define PS3AV_CMD_AUDIO_FS_44K				0x0002
-#define PS3AV_CMD_AUDIO_FS_48K				0x0003
-#define PS3AV_CMD_AUDIO_FS_88K				0x0004
-#define PS3AV_CMD_AUDIO_FS_96K				0x0005
-#define PS3AV_CMD_AUDIO_FS_176K				0x0006
-#define PS3AV_CMD_AUDIO_FS_192K				0x0007
-/* audio_word_bits */
-#define PS3AV_CMD_AUDIO_WORD_BITS_16			0x0001
-#define PS3AV_CMD_AUDIO_WORD_BITS_20			0x0002
-#define PS3AV_CMD_AUDIO_WORD_BITS_24			0x0003
-/* audio_format */
-#define PS3AV_CMD_AUDIO_FORMAT_PCM			0x0001
-#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM		0x00ff
-/* audio_source */
-#define PS3AV_CMD_AUDIO_SOURCE_SERIAL			0x0000
-#define PS3AV_CMD_AUDIO_SOURCE_SPDIF			0x0001
-/* audio_swap */
-#define PS3AV_CMD_AUDIO_SWAP_0				0x0000
-#define PS3AV_CMD_AUDIO_SWAP_1				0x0000
-/* audio_map */
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0			0x0000
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1			0x0001
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2			0x0002
-#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3			0x0003
-/* audio_layout */
-#define PS3AV_CMD_AUDIO_LAYOUT_2CH			0x0000
-#define PS3AV_CMD_AUDIO_LAYOUT_6CH			0x000b	/* LREClr */
-#define PS3AV_CMD_AUDIO_LAYOUT_8CH			0x001f	/* LREClrXY */
-/* audio_downmix */
-#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED		0x0000
-#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED		0x0001
-
-/* audio_port */
-#define PS3AV_CMD_AUDIO_PORT_HDMI_0			( 1 << 0 )
-#define PS3AV_CMD_AUDIO_PORT_HDMI_1			( 1 << 1 )
-#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0			( 1 << 10 )
-#define PS3AV_CMD_AUDIO_PORT_SPDIF_0			( 1 << 20 )
-#define PS3AV_CMD_AUDIO_PORT_SPDIF_1			( 1 << 21 )
-
-/* audio_ctrl_id */
-#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET		0x0000
-#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS		0x0001
-#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK			0x0002
-/* audio_ctrl_data[0] reset */
-#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE		0x0000
-#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT		0x0001
-/* audio_ctrl_data[0] de-emphasis */
-#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF		0x0000
-#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON		0x0001
-/* audio_ctrl_data[0] avclk */
-#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22			0x0000
-#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18			0x0001
-
-/* av_vid */
-/* do not use these params directly, use vid_video2av */
-#define PS3AV_CMD_AV_VID_480I				0x0000
-#define PS3AV_CMD_AV_VID_480P				0x0001
-#define PS3AV_CMD_AV_VID_720P_60HZ			0x0002
-#define PS3AV_CMD_AV_VID_1080I_60HZ			0x0003
-#define PS3AV_CMD_AV_VID_1080P_60HZ			0x0004
-#define PS3AV_CMD_AV_VID_576I				0x0005
-#define PS3AV_CMD_AV_VID_576P				0x0006
-#define PS3AV_CMD_AV_VID_720P_50HZ			0x0007
-#define PS3AV_CMD_AV_VID_1080I_50HZ			0x0008
-#define PS3AV_CMD_AV_VID_1080P_50HZ			0x0009
-#define PS3AV_CMD_AV_VID_WXGA				0x000a
-#define PS3AV_CMD_AV_VID_SXGA				0x000b
-#define PS3AV_CMD_AV_VID_WUXGA				0x000c
-/* av_cs_out av_cs_in */
-/* use cs_video2av() */
-#define PS3AV_CMD_AV_CS_RGB_8				0x0000
-#define PS3AV_CMD_AV_CS_YUV444_8			0x0001
-#define PS3AV_CMD_AV_CS_YUV422_8			0x0002
-#define PS3AV_CMD_AV_CS_XVYCC_8				0x0003
-#define PS3AV_CMD_AV_CS_RGB_10				0x0004
-#define PS3AV_CMD_AV_CS_YUV444_10			0x0005
-#define PS3AV_CMD_AV_CS_YUV422_10			0x0006
-#define PS3AV_CMD_AV_CS_XVYCC_10			0x0007
-#define PS3AV_CMD_AV_CS_RGB_12				0x0008
-#define PS3AV_CMD_AV_CS_YUV444_12			0x0009
-#define PS3AV_CMD_AV_CS_YUV422_12			0x000a
-#define PS3AV_CMD_AV_CS_XVYCC_12			0x000b
-#define PS3AV_CMD_AV_CS_8				0x0000
-#define PS3AV_CMD_AV_CS_10				0x0001
-#define PS3AV_CMD_AV_CS_12				0x0002
-/* dither */
-#define PS3AV_CMD_AV_DITHER_OFF				0x0000
-#define PS3AV_CMD_AV_DITHER_ON				0x0001
-#define PS3AV_CMD_AV_DITHER_8BIT			0x0000
-#define PS3AV_CMD_AV_DITHER_10BIT			0x0002
-#define PS3AV_CMD_AV_DITHER_12BIT			0x0004
-/* super_white */
-#define PS3AV_CMD_AV_SUPER_WHITE_OFF			0x0000
-#define PS3AV_CMD_AV_SUPER_WHITE_ON			0x0001
-/* aspect */
-#define PS3AV_CMD_AV_ASPECT_16_9			0x0000
-#define PS3AV_CMD_AV_ASPECT_4_3				0x0001
-/* video_cs_cnv() */
-#define PS3AV_CMD_VIDEO_CS_RGB				0x0001
-#define PS3AV_CMD_VIDEO_CS_YUV422			0x0002
-#define PS3AV_CMD_VIDEO_CS_YUV444			0x0003
-
-/* for broadcast automode */
-#define PS3AV_RESBIT_720x480P			0x0003	/* 0x0001 | 0x0002 */
-#define PS3AV_RESBIT_720x576P			0x0003	/* 0x0001 | 0x0002 */
-#define PS3AV_RESBIT_1280x720P			0x0004
-#define PS3AV_RESBIT_1920x1080I			0x0008
-#define PS3AV_RESBIT_1920x1080P			0x4000
-#define PS3AV_RES_MASK_60			(PS3AV_RESBIT_720x480P \
-						| PS3AV_RESBIT_1280x720P \
-						| PS3AV_RESBIT_1920x1080I \
-						| PS3AV_RESBIT_1920x1080P)
-#define PS3AV_RES_MASK_50			(PS3AV_RESBIT_720x576P \
-						| PS3AV_RESBIT_1280x720P \
-						| PS3AV_RESBIT_1920x1080I \
-						| PS3AV_RESBIT_1920x1080P)
-
-/* for VESA automode */
-#define PS3AV_RESBIT_VGA			0x0001
-#define PS3AV_RESBIT_WXGA			0x0002
-#define PS3AV_RESBIT_SXGA			0x0004
-#define PS3AV_RESBIT_WUXGA			0x0008
-#define PS3AV_RES_MASK_VESA			(PS3AV_RESBIT_WXGA |\
-						 PS3AV_RESBIT_SXGA |\
-						 PS3AV_RESBIT_WUXGA)
-
-#define PS3AV_MONITOR_TYPE_HDMI			1	/* HDMI */
-#define PS3AV_MONITOR_TYPE_DVI			2	/* DVI */
-
-
-/* for video mode */
-enum ps3av_mode_num {
-	PS3AV_MODE_AUTO				= 0,
-	PS3AV_MODE_480I				= 1,
-	PS3AV_MODE_480P				= 2,
-	PS3AV_MODE_720P60			= 3,
-	PS3AV_MODE_1080I60			= 4,
-	PS3AV_MODE_1080P60			= 5,
-	PS3AV_MODE_576I				= 6,
-	PS3AV_MODE_576P				= 7,
-	PS3AV_MODE_720P50			= 8,
-	PS3AV_MODE_1080I50			= 9,
-	PS3AV_MODE_1080P50			= 10,
-	PS3AV_MODE_WXGA				= 11,
-	PS3AV_MODE_SXGA				= 12,
-	PS3AV_MODE_WUXGA			= 13,
-};
-
-#define PS3AV_MODE_MASK				0x000F
-#define PS3AV_MODE_HDCP_OFF			0x1000	/* Retail PS3 product doesn't support this */
-#define PS3AV_MODE_DITHER			0x0800
-#define PS3AV_MODE_COLOR			0x0400
-#define PS3AV_MODE_WHITE			0x0200
-#define PS3AV_MODE_FULL				0x0080
-#define PS3AV_MODE_DVI				0x0040
-#define PS3AV_MODE_RGB				0x0020
-
-
-#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60	PS3AV_MODE_480P
-#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60	PS3AV_MODE_480I
-#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50	PS3AV_MODE_576P
-#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50	PS3AV_MODE_576I
-
-#define PS3AV_REGION_60				0x01
-#define PS3AV_REGION_50				0x02
-#define PS3AV_REGION_RGB			0x10
-
-#define get_status(buf)				(((__u32 *)buf)[2])
-#define PS3AV_HDR_SIZE				4	/* version + size */
-
-
-/** command packet structure **/
-struct ps3av_send_hdr {
-	u16 version;
-	u16 size;		/* size of command packet */
-	u32 cid;		/* command id */
-};
-
-struct ps3av_reply_hdr {
-	u16 version;
-	u16 size;
-	u32 cid;
-	u32 status;
-};
-
-/* backend: initialization */
-struct ps3av_pkt_av_init {
-	struct ps3av_send_hdr send_hdr;
-	u32 event_bit;
-};
-
-/* backend: finalize */
-struct ps3av_pkt_av_fin {
-	struct ps3av_send_hdr send_hdr;
-	/* recv */
-	u32 reserved;
-};
-
-/* backend: get port */
-struct ps3av_pkt_av_get_hw_conf {
-	struct ps3av_send_hdr send_hdr;
-	/* recv */
-	u32 status;
-	u16 num_of_hdmi;	/* out: number of hdmi */
-	u16 num_of_avmulti;	/* out: number of avmulti */
-	u16 num_of_spdif;	/* out: number of hdmi */
-	u16 reserved;
-};
-
-/* backend: get monitor info */
-struct ps3av_info_resolution {
-	u32 res_bits;
-	u32 native;
-};
-
-struct ps3av_info_cs {
-	u8 rgb;
-	u8 yuv444;
-	u8 yuv422;
-	u8 reserved;
-};
-
-struct ps3av_info_color {
-	u16 red_x;
-	u16 red_y;
-	u16 green_x;
-	u16 green_y;
-	u16 blue_x;
-	u16 blue_y;
-	u16 white_x;
-	u16 white_y;
-	u32 gamma;
-};
-
-struct ps3av_info_audio {
-	u8 type;
-	u8 max_num_of_ch;
-	u8 fs;
-	u8 sbit;
-};
-
-struct ps3av_info_monitor {
-	u8 avport;
-	u8 monitor_id[10];
-	u8 monitor_type;
-	u8 monitor_name[16];
-	struct ps3av_info_resolution res_60;
-	struct ps3av_info_resolution res_50;
-	struct ps3av_info_resolution res_other;
-	struct ps3av_info_resolution res_vesa;
-	struct ps3av_info_cs cs;
-	struct ps3av_info_color color;
-	u8 supported_ai;
-	u8 speaker_info;
-	u8 num_of_audio_block;
-	struct ps3av_info_audio audio[0];	/* 0 or more audio blocks */
-	u8 reserved[169];
-} __attribute__ ((packed));
-
-struct ps3av_pkt_av_get_monitor_info {
-	struct ps3av_send_hdr send_hdr;
-	u16 avport;		/* in: avport */
-	u16 reserved;
-	/* recv */
-	struct ps3av_info_monitor info;	/* out: monitor info */
-};
-
-/* backend: enable/disable event */
-struct ps3av_pkt_av_event {
-	struct ps3av_send_hdr send_hdr;
-	u32 event_bit;		/* in */
-};
-
-/* backend: video cs param */
-struct ps3av_pkt_av_video_cs {
-	struct ps3av_send_hdr send_hdr;
-	u16 avport;		/* in: avport */
-	u16 av_vid;		/* in: video resolution */
-	u16 av_cs_out;		/* in: output color space */
-	u16 av_cs_in;		/* in: input color space */
-	u8 dither;		/* in: dither bit length */
-	u8 bitlen_out;		/* in: bit length */
-	u8 super_white;		/* in: super white */
-	u8 aspect;		/* in: aspect ratio */
-};
-
-/* backend: video mute */
-struct ps3av_av_mute {
-	u16 avport;		/* in: avport */
-	u16 mute;		/* in: mute on/off */
-};
-
-struct ps3av_pkt_av_video_mute {
-	struct ps3av_send_hdr send_hdr;
-	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
-};
-
-/* backend: video disable signal */
-struct ps3av_pkt_av_video_disable_sig {
-	struct ps3av_send_hdr send_hdr;
-	u16 avport;		/* in: avport */
-	u16 reserved;
-};
-
-/* backend: audio param */
-struct ps3av_audio_info_frame {
-	struct pb1_bit {
-		u8 ct:4;
-		u8 rsv:1;
-		u8 cc:3;
-	} pb1;
-	struct pb2_bit {
-		u8 rsv:3;
-		u8 sf:3;
-		u8 ss:2;
-	} pb2;
-	u8 pb3;
-	u8 pb4;
-	struct pb5_bit {
-		u8 dm:1;
-		u8 lsv:4;
-		u8 rsv:3;
-	} pb5;
-};
-
-struct ps3av_pkt_av_audio_param {
-	struct ps3av_send_hdr send_hdr;
-	u16 avport;		/* in: avport */
-	u16 reserved;
-	u8 mclk;		/* in: audio mclk */
-	u8 ns[3];		/* in: audio ns val */
-	u8 enable;		/* in: audio enable */
-	u8 swaplr;		/* in: audio swap */
-	u8 fifomap;		/* in: audio fifomap */
-	u8 inputctrl;		/* in: audio input ctrl */
-	u8 inputlen;		/* in: sample bit size */
-	u8 layout;		/* in: speaker layout param */
-	struct ps3av_audio_info_frame info;	/* in: info */
-	u8 chstat[5];		/* in: ch stat */
-};
-
-/* backend: audio_mute */
-struct ps3av_pkt_av_audio_mute {
-	struct ps3av_send_hdr send_hdr;
-	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
-};
-
-/* backend: hdmi_mode */
-struct ps3av_pkt_av_hdmi_mode {
-	struct ps3av_send_hdr send_hdr;
-	u8 mode;		/* in: hdmi_mode */
-	u8 reserved0;
-	u8 reserved1;
-	u8 reserved2;
-};
-
-/* backend: tv_mute */
-struct ps3av_pkt_av_tv_mute {
-	struct ps3av_send_hdr send_hdr;
-	u16 avport;		/* in: avport HDMI only */
-	u16 mute;		/* in: mute */
-};
-
-/* video: initialize */
-struct ps3av_pkt_video_init {
-	struct ps3av_send_hdr send_hdr;
-	/* recv */
-	u32 reserved;
-};
-
-/* video: mode setting */
-struct ps3av_pkt_video_mode {
-	struct ps3av_send_hdr send_hdr;
-	u32 video_head;		/* in: head */
-	u32 reserved;
-	u32 video_vid;		/* in: video resolution */
-	u16 reserved1;
-	u16 width;		/* in: width in pixel */
-	u16 reserved2;
-	u16 height;		/* in: height in pixel */
-	u32 pitch;		/* in: line size in byte */
-	u32 video_out_format;	/* in: out format */
-	u32 video_format;	/* in: input frame buffer format */
-	u8 reserved3;
-	u8 video_cl_cnv;	/* in: color conversion */
-	u16 video_order;	/* in: input RGB order */
-	u32 reserved4;
-};
-
-/* video: format */
-struct ps3av_pkt_video_format {
-	struct ps3av_send_hdr send_hdr;
-	u32 video_head;		/* in: head */
-	u32 video_format;	/* in: frame buffer format */
-	u8 reserved;
-	u8 video_cl_cnv;	/* in: color conversion */
-	u16 video_order;	/* in: input RGB order */
-};
-
-/* video: pitch */
-struct ps3av_pkt_video_pitch {
-	u16 version;
-	u16 size;		/* size of command packet */
-	u32 cid;		/* command id */
-	u32 video_head;		/* in: head */
-	u32 pitch;		/* in: line size in byte */
-};
-
-/* audio: initialize */
-struct ps3av_pkt_audio_init {
-	struct ps3av_send_hdr send_hdr;
-	/* recv */
-	u32 reserved;
-};
-
-/* audio: mode setting */
-struct ps3av_pkt_audio_mode {
-	struct ps3av_send_hdr send_hdr;
-	u8 avport;		/* in: avport */
-	u8 reserved0[3];
-	u32 mask;		/* in: mask */
-	u32 audio_num_of_ch;	/* in: number of ch */
-	u32 audio_fs;		/* in: sampling freq */
-	u32 audio_word_bits;	/* in: sample bit size */
-	u32 audio_format;	/* in: audio output format */
-	u32 audio_source;	/* in: audio source */
-	u8 audio_enable[4];	/* in: audio enable */
-	u8 audio_swap[4];	/* in: audio swap */
-	u8 audio_map[4];	/* in: audio map */
-	u32 audio_layout;	/* in: speaker layout */
-	u32 audio_downmix;	/* in: audio downmix permission */
-	u32 audio_downmix_level;
-	u8 audio_cs_info[8];	/* in: IEC channel status */
-};
-
-/* audio: mute */
-struct ps3av_audio_mute {
-	u8 avport;		/* in: opt_port optical */
-	u8 reserved[3];
-	u32 mute;		/* in: mute */
-};
-
-struct ps3av_pkt_audio_mute {
-	struct ps3av_send_hdr send_hdr;
-	struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX];
-};
-
-/* audio: active/inactive */
-struct ps3av_pkt_audio_active {
-	struct ps3av_send_hdr send_hdr;
-	u32 audio_port;		/* in: audio active/inactive port */
-};
-
-/* audio: SPDIF user bit */
-struct ps3av_pkt_audio_spdif_bit {
-	u16 version;
-	u16 size;		/* size of command packet */
-	u32 cid;		/* command id */
-	u8 avport;		/* in: avport SPDIF only */
-	u8 reserved[3];
-	u32 audio_port;		/* in: SPDIF only */
-	u32 spdif_bit_data[12];	/* in: user bit data */
-};
-
-/* audio: audio control */
-struct ps3av_pkt_audio_ctrl {
-	u16 version;
-	u16 size;		/* size of command packet */
-	u32 cid;		/* command id */
-	u32 audio_ctrl_id;	/* in: control id */
-	u32 audio_ctrl_data[4];	/* in: control data */
-};
-
-/* avb:param */
-#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE	\
-	(PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \
-	 PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \
-	 PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \
-	 PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param))
-
-struct ps3av_pkt_avb_param {
-	struct ps3av_send_hdr send_hdr;
-	u16 num_of_video_pkt;
-	u16 num_of_audio_pkt;
-	u16 num_of_av_video_pkt;
-	u16 num_of_av_audio_pkt;
-	/*
-	 * The actual buffer layout depends on the fields above:
-	 *
-	 * struct ps3av_pkt_video_mode video[num_of_video_pkt];
-	 * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt];
-	 * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt];
-	 * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt];
-	 */
-	u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE];
-};
-
-
-/** command status **/
-#define PS3AV_STATUS_SUCCESS			0x0000	/* success */
-#define PS3AV_STATUS_RECEIVE_VUART_ERROR	0x0001	/* receive vuart error */
-#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL	0x0002	/* syscon communication error */
-#define PS3AV_STATUS_INVALID_COMMAND		0x0003	/* obsolete invalid CID */
-#define PS3AV_STATUS_INVALID_PORT		0x0004	/* invalid port number */
-#define PS3AV_STATUS_INVALID_VID		0x0005	/* invalid video format */
-#define PS3AV_STATUS_INVALID_COLOR_SPACE	0x0006	/* invalid video colose space */
-#define PS3AV_STATUS_INVALID_FS			0x0007	/* invalid audio sampling freq */
-#define PS3AV_STATUS_INVALID_AUDIO_CH		0x0008	/* invalid audio channel number */
-#define PS3AV_STATUS_UNSUPPORTED_VERSION	0x0009	/* version mismatch  */
-#define PS3AV_STATUS_INVALID_SAMPLE_SIZE	0x000a	/* invalid audio sample bit size */
-#define PS3AV_STATUS_FAILURE			0x000b	/* other failures */
-#define PS3AV_STATUS_UNSUPPORTED_COMMAND	0x000c	/* unsupported cid */
-#define PS3AV_STATUS_BUFFER_OVERFLOW		0x000d	/* write buffer overflow */
-#define PS3AV_STATUS_INVALID_VIDEO_PARAM	0x000e	/* invalid video param */
-#define PS3AV_STATUS_NO_SEL			0x000f	/* not exist selector */
-#define PS3AV_STATUS_INVALID_AV_PARAM		0x0010	/* invalid backend param */
-#define PS3AV_STATUS_INVALID_AUDIO_PARAM	0x0011	/* invalid audio param */
-#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE	0x0012	/* unsupported hdmi mode */
-#define PS3AV_STATUS_NO_SYNC_HEAD		0x0013	/* sync head failed */
-
-extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *);
-extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *);
-
-extern int ps3av_cmd_init(void);
-extern int ps3av_cmd_fin(void);
-extern int ps3av_cmd_av_video_mute(int, u32 *, u32);
-extern int ps3av_cmd_av_video_disable_sig(u32);
-extern int ps3av_cmd_av_tv_mute(u32, u32);
-extern int ps3av_cmd_enable_event(void);
-extern int ps3av_cmd_av_hdmi_mode(u8);
-extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32);
-extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32);
-extern int ps3av_cmd_video_format_black(u32, u32, u32);
-extern int ps3av_cmd_av_audio_mute(int, u32 *, u32);
-extern u32 ps3av_cmd_set_av_audio_param(void *, u32,
-					const struct ps3av_pkt_audio_mode *,
-					u32);
-extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32,
-				     u32, u32, u32, u32);
-extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *);
-extern int ps3av_cmd_audio_mute(int, u32 *, u32);
-extern int ps3av_cmd_audio_active(int, u32);
-extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32);
-extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *);
-extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *,
-					    u32);
-
-extern int ps3av_set_video_mode(u32);
-extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32);
-extern int ps3av_get_auto_mode(void);
-extern int ps3av_get_mode(void);
-extern int ps3av_video_mode2res(u32, u32 *, u32 *);
-extern int ps3av_video_mute(int);
-extern int ps3av_audio_mute(int);
-extern int ps3av_dev_open(void);
-extern int ps3av_dev_close(void);
-extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data),
-				    void *flip_data);
-extern void ps3av_flip_ctl(int on);
-
-#endif	/* _ASM_POWERPC_PS3AV_H_ */
diff --git a/include/asm-powerpc/ps3fb.h b/include/asm-powerpc/ps3fb.h
deleted file mode 100644
index 3f121fe4010d..000000000000
--- a/include/asm-powerpc/ps3fb.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2006 Sony Computer Entertainment Inc.
- * Copyright 2006, 2007 Sony Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _ASM_POWERPC_PS3FB_H_
-#define _ASM_POWERPC_PS3FB_H_
-
-#include <linux/ioctl.h>
-
-/* ioctl */
-#define PS3FB_IOCTL_SETMODE       _IOW('r',  1, int) /* set video mode */
-#define PS3FB_IOCTL_GETMODE       _IOR('r',  2, int) /* get video mode */
-#define PS3FB_IOCTL_SCREENINFO    _IOR('r',  3, int) /* get screen info */
-#define PS3FB_IOCTL_ON            _IO('r', 4)        /* use IOCTL_FSEL */
-#define PS3FB_IOCTL_OFF           _IO('r', 5)        /* return to normal-flip */
-#define PS3FB_IOCTL_FSEL          _IOW('r', 6, int)  /* blit and flip request */
-
-#ifndef FBIO_WAITFORVSYNC
-#define FBIO_WAITFORVSYNC         _IOW('F', 0x20, __u32) /* wait for vsync */
-#endif
-
-struct ps3fb_ioctl_res {
-	__u32 xres; /* frame buffer x_size */
-	__u32 yres; /* frame buffer y_size */
-	__u32 xoff; /* margine x  */
-	__u32 yoff; /* margine y */
-	__u32 num_frames; /* num of frame buffers */
-};
-
-#endif /* _ASM_POWERPC_PS3FB_H_ */
diff --git a/include/asm-powerpc/ps3stor.h b/include/asm-powerpc/ps3stor.h
deleted file mode 100644
index 6fcaf714fa50..000000000000
--- a/include/asm-powerpc/ps3stor.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * PS3 Storage Devices
- *
- * Copyright (C) 2007 Sony Computer Entertainment Inc.
- * Copyright 2007 Sony Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _ASM_POWERPC_PS3STOR_H_
-#define _ASM_POWERPC_PS3STOR_H_
-
-#include <linux/interrupt.h>
-
-#include <asm/ps3.h>
-
-
-struct ps3_storage_region {
-	unsigned int id;
-	u64 start;
-	u64 size;
-};
-
-struct ps3_storage_device {
-	struct ps3_system_bus_device sbd;
-
-	struct ps3_dma_region dma_region;
-	unsigned int irq;
-	u64 blk_size;
-
-	u64 tag;
-	u64 lv1_status;
-	struct completion done;
-
-	unsigned long bounce_size;
-	void *bounce_buf;
-	u64 bounce_lpar;
-	dma_addr_t bounce_dma;
-
-	unsigned int num_regions;
-	unsigned long accessible_regions;
-	unsigned int region_idx;		/* first accessible region */
-	struct ps3_storage_region regions[0];	/* Must be last */
-};
-
-static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev)
-{
-	return container_of(dev, struct ps3_storage_device, sbd.core);
-}
-
-extern int ps3stor_setup(struct ps3_storage_device *dev,
-			 irq_handler_t handler);
-extern void ps3stor_teardown(struct ps3_storage_device *dev);
-extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar,
-				      u64 start_sector, u64 sectors,
-				      int write);
-extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd,
-				u64 arg1, u64 arg2, u64 arg3, u64 arg4);
-
-#endif /* _ASM_POWERPC_PS3STOR_H_ */
diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h
deleted file mode 100644
index 3d6e31024e56..000000000000
--- a/include/asm-powerpc/ptrace.h
+++ /dev/null
@@ -1,292 +0,0 @@
-#ifndef _ASM_POWERPC_PTRACE_H
-#define _ASM_POWERPC_PTRACE_H
-
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- *
- * this should only contain volatile regs
- * since we can keep non-volatile in the thread_struct
- * should set this up when only volatiles are saved
- * by intr code.
- *
- * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
- * that the overall structure is a multiple of 16 bytes in length.
- *
- * Note that the offsets of the fields in this struct correspond with
- * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
-	unsigned long gpr[32];
-	unsigned long nip;
-	unsigned long msr;
-	unsigned long orig_gpr3;	/* Used for restarting system calls */
-	unsigned long ctr;
-	unsigned long link;
-	unsigned long xer;
-	unsigned long ccr;
-#ifdef __powerpc64__
-	unsigned long softe;		/* Soft enabled/disabled */
-#else
-	unsigned long mq;		/* 601 only (not used at present) */
-					/* Used on APUS to hold IPL value. */
-#endif
-	unsigned long trap;		/* Reason for being here */
-	/* N.B. for critical exceptions on 4xx, the dar and dsisr
-	   fields are overloaded to hold srr0 and srr1. */
-	unsigned long dar;		/* Fault registers */
-	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
-	unsigned long result;		/* Result of a system call */
-};
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#ifdef __powerpc64__
-
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
-#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
-#define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
-#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
-#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
-					STACK_FRAME_OVERHEAD + 288)
-#define STACK_FRAME_MARKER	12
-
-/* Size of dummy stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE	128
-#define __SIGNAL_FRAMESIZE32	64
-
-#else /* __powerpc64__ */
-
-#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
-#define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
-#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)
-#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
-#define STACK_FRAME_MARKER	2
-
-/* Size of stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE	64
-
-#endif /* __powerpc64__ */
-
-#ifndef __ASSEMBLY__
-
-#define instruction_pointer(regs) ((regs)->nip)
-#define regs_return_value(regs) ((regs)->gpr[3])
-
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
-#ifdef __powerpc64__
-#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
-#else
-#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
-#endif
-
-#define force_successful_syscall_return()   \
-	do { \
-		set_thread_flag(TIF_NOERROR); \
-	} while(0)
-
-struct task_struct;
-extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
-extern int ptrace_put_reg(struct task_struct *task, int regno,
-			  unsigned long data);
-
-/*
- * We use the least-significant bit of the trap field to indicate
- * whether we have saved the full set of registers, or only a
- * partial set.  A 1 there means the partial set.
- * On 4xx we use the next bit to indicate whether the exception
- * is a critical exception (1 means it is).
- */
-#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
-#ifndef __powerpc64__
-#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) != 0)
-#define IS_MCHECK_EXC(regs)	(((regs)->trap & 4) != 0)
-#define IS_DEBUG_EXC(regs)	(((regs)->trap & 8) != 0)
-#endif /* ! __powerpc64__ */
-#define TRAP(regs)		((regs)->trap & ~0xF)
-#ifdef __powerpc64__
-#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
-#else
-#define CHECK_FULL_REGS(regs)						      \
-do {									      \
-	if ((regs)->trap & 1)						      \
-		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
-} while (0)
-#endif /* __powerpc64__ */
-
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
-#define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- * These can't be changed without breaking binary compatibility
- * with MkLinux, etc.
- */
-#define PT_R0	0
-#define PT_R1	1
-#define PT_R2	2
-#define PT_R3	3
-#define PT_R4	4
-#define PT_R5	5
-#define PT_R6	6
-#define PT_R7	7
-#define PT_R8	8
-#define PT_R9	9
-#define PT_R10	10
-#define PT_R11	11
-#define PT_R12	12
-#define PT_R13	13
-#define PT_R14	14
-#define PT_R15	15
-#define PT_R16	16
-#define PT_R17	17
-#define PT_R18	18
-#define PT_R19	19
-#define PT_R20	20
-#define PT_R21	21
-#define PT_R22	22
-#define PT_R23	23
-#define PT_R24	24
-#define PT_R25	25
-#define PT_R26	26
-#define PT_R27	27
-#define PT_R28	28
-#define PT_R29	29
-#define PT_R30	30
-#define PT_R31	31
-
-#define PT_NIP	32
-#define PT_MSR	33
-#define PT_ORIG_R3 34
-#define PT_CTR	35
-#define PT_LNK	36
-#define PT_XER	37
-#define PT_CCR	38
-#ifndef __powerpc64__
-#define PT_MQ	39
-#else
-#define PT_SOFTE 39
-#endif
-#define PT_TRAP	40
-#define PT_DAR	41
-#define PT_DSISR 42
-#define PT_RESULT 43
-#define PT_REGS_COUNT 44
-
-#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
-
-#ifndef __powerpc64__
-
-#define PT_FPR31 (PT_FPR0 + 2*31)
-#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
-
-#else /* __powerpc64__ */
-
-#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
-
-#ifdef __KERNEL__
-#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
-#endif
-
-#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
-#define PT_VSCR (PT_VR0 + 32*2 + 1)
-#define PT_VRSAVE (PT_VR0 + 33*2)
-
-#ifdef __KERNEL__
-#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
-#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
-#define PT_VRSAVE_32 (PT_VR0 + 33*4)
-#endif
-
-/*
- * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
- */
-#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
-#define PT_VSR31 (PT_VSR0 + 2*31)
-#ifdef __KERNEL__
-#define PT_VSR0_32 300 	/* each VSR reg occupies 4 slots in 32-bit */
-#endif
-#endif /* __powerpc64__ */
-
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword.  Quadwords 0-31 contain the
- * corresponding vector registers.  Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword.  Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface.  This allows signal handling and ptrace to use the same
- * structures.  This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-#define PTRACE_GETVRREGS	18
-#define PTRACE_SETVRREGS	19
-
-/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
- * spefscr, in one go */
-#define PTRACE_GETEVRREGS	20
-#define PTRACE_SETEVRREGS	21
-
-/* Get the first 32 128bit VSX registers */
-#define PTRACE_GETVSRREGS	27
-#define PTRACE_SETVSRREGS	28
-
-/*
- * Get or set a debug register. The first 16 are DABR registers and the
- * second 16 are IABR registers.
- */
-#define PTRACE_GET_DEBUGREG	25
-#define PTRACE_SET_DEBUGREG	26
-
-/* (new) PTRACE requests using the same numbers as x86 and the same
- * argument ordering. Additionally, they support more registers too
- */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_GETREGS64	  22
-#define PTRACE_SETREGS64	  23
-
-/* (old) PTRACE requests with inverted arguments */
-#define PPC_PTRACE_GETREGS	0x99	/* Get GPRs 0 - 31 */
-#define PPC_PTRACE_SETREGS	0x98	/* Set GPRs 0 - 31 */
-#define PPC_PTRACE_GETFPREGS	0x97	/* Get FPRs 0 - 31 */
-#define PPC_PTRACE_SETFPREGS	0x96	/* Set FPRs 0 - 31 */
-
-/* Calls to trace a 64bit program from a 32bit program */
-#define PPC_PTRACE_PEEKTEXT_3264 0x95
-#define PPC_PTRACE_PEEKDATA_3264 0x94
-#define PPC_PTRACE_POKETEXT_3264 0x93
-#define PPC_PTRACE_POKEDATA_3264 0x92
-#define PPC_PTRACE_PEEKUSR_3264  0x91
-#define PPC_PTRACE_POKEUSR_3264  0x90
-
-#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
deleted file mode 100644
index edee15d269ea..000000000000
--- a/include/asm-powerpc/qe.h
+++ /dev/null
@@ -1,642 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QUICC Engine (QE) external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_H
-#define _ASM_POWERPC_QE_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <asm/cpm.h>
-#include <asm/immap_qe.h>
-
-#define QE_NUM_OF_SNUM	28
-#define QE_NUM_OF_BRGS	16
-#define QE_NUM_OF_PORTS	1024
-
-/* Memory partitions
-*/
-#define MEM_PART_SYSTEM		0
-#define MEM_PART_SECONDARY	1
-#define MEM_PART_MURAM		2
-
-/* Clocks and BRGs */
-enum qe_clock {
-	QE_CLK_NONE = 0,
-	QE_BRG1,		/* Baud Rate Generator 1 */
-	QE_BRG2,		/* Baud Rate Generator 2 */
-	QE_BRG3,		/* Baud Rate Generator 3 */
-	QE_BRG4,		/* Baud Rate Generator 4 */
-	QE_BRG5,		/* Baud Rate Generator 5 */
-	QE_BRG6,		/* Baud Rate Generator 6 */
-	QE_BRG7,		/* Baud Rate Generator 7 */
-	QE_BRG8,		/* Baud Rate Generator 8 */
-	QE_BRG9,		/* Baud Rate Generator 9 */
-	QE_BRG10,		/* Baud Rate Generator 10 */
-	QE_BRG11,		/* Baud Rate Generator 11 */
-	QE_BRG12,		/* Baud Rate Generator 12 */
-	QE_BRG13,		/* Baud Rate Generator 13 */
-	QE_BRG14,		/* Baud Rate Generator 14 */
-	QE_BRG15,		/* Baud Rate Generator 15 */
-	QE_BRG16,		/* Baud Rate Generator 16 */
-	QE_CLK1,		/* Clock 1 */
-	QE_CLK2,		/* Clock 2 */
-	QE_CLK3,		/* Clock 3 */
-	QE_CLK4,		/* Clock 4 */
-	QE_CLK5,		/* Clock 5 */
-	QE_CLK6,		/* Clock 6 */
-	QE_CLK7,		/* Clock 7 */
-	QE_CLK8,		/* Clock 8 */
-	QE_CLK9,		/* Clock 9 */
-	QE_CLK10,		/* Clock 10 */
-	QE_CLK11,		/* Clock 11 */
-	QE_CLK12,		/* Clock 12 */
-	QE_CLK13,		/* Clock 13 */
-	QE_CLK14,		/* Clock 14 */
-	QE_CLK15,		/* Clock 15 */
-	QE_CLK16,		/* Clock 16 */
-	QE_CLK17,		/* Clock 17 */
-	QE_CLK18,		/* Clock 18 */
-	QE_CLK19,		/* Clock 19 */
-	QE_CLK20,		/* Clock 20 */
-	QE_CLK21,		/* Clock 21 */
-	QE_CLK22,		/* Clock 22 */
-	QE_CLK23,		/* Clock 23 */
-	QE_CLK24,		/* Clock 24 */
-	QE_CLK_DUMMY
-};
-
-static inline bool qe_clock_is_brg(enum qe_clock clk)
-{
-	return clk >= QE_BRG1 && clk <= QE_BRG16;
-}
-
-extern spinlock_t cmxgcr_lock;
-
-/* Export QE common operations */
-extern void __init qe_reset(void);
-
-/* QE PIO */
-#define QE_PIO_PINS 32
-
-struct qe_pio_regs {
-	__be32	cpodr;		/* Open drain register */
-	__be32	cpdata;		/* Data register */
-	__be32	cpdir1;		/* Direction register */
-	__be32	cpdir2;		/* Direction register */
-	__be32	cppar1;		/* Pin assignment register */
-	__be32	cppar2;		/* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
-	u8	pad[8];
-#endif
-};
-
-extern int par_io_init(struct device_node *np);
-extern int par_io_of_config(struct device_node *np);
-#define QE_PIO_DIR_IN	2
-#define QE_PIO_DIR_OUT	1
-extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
-				int dir, int open_drain, int assignment,
-				int has_irq);
-extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-			     int assignment, int has_irq);
-extern int par_io_data_set(u8 port, u8 pin, u8 val);
-
-/* QE internal API */
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-enum qe_clock qe_clock_source(const char *source);
-unsigned int qe_get_brg_clk(void);
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
-int qe_get_snum(void);
-void qe_put_snum(u8 snum);
-/* we actually use cpm_muram implementation, define this for convenience */
-#define qe_muram_init cpm_muram_init
-#define qe_muram_alloc cpm_muram_alloc
-#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
-#define qe_muram_free cpm_muram_free
-#define qe_muram_addr cpm_muram_addr
-#define qe_muram_offset cpm_muram_offset
-
-/* Structure that defines QE firmware binary files.
- *
- * See Documentation/powerpc/qe-firmware.txt for a description of these
- * fields.
- */
-struct qe_firmware {
-	struct qe_header {
-		__be32 length;  /* Length of the entire structure, in bytes */
-		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
-		u8 version;     /* Version of this layout. First ver is '1' */
-	} header;
-	u8 id[62];      /* Null-terminated identifier string */
-	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
-	u8 count;       /* Number of microcode[] structures */
-	struct {
-		__be16 model;   	/* The SOC model  */
-		u8 major;       	/* The SOC revision major */
-		u8 minor;       	/* The SOC revision minor */
-	} __attribute__ ((packed)) soc;
-	u8 padding[4];			/* Reserved, for alignment */
-	__be64 extended_modes;		/* Extended modes */
-	__be32 vtraps[8];		/* Virtual trap addresses */
-	u8 reserved[4];			/* Reserved, for future expansion */
-	struct qe_microcode {
-		u8 id[32];      	/* Null-terminated identifier */
-		__be32 traps[16];       /* Trap addresses, 0 == ignore */
-		__be32 eccr;    	/* The value for the ECCR register */
-		__be32 iram_offset;     /* Offset into I-RAM for the code */
-		__be32 count;   	/* Number of 32-bit words of the code */
-		__be32 code_offset;     /* Offset of the actual microcode */
-		u8 major;       	/* The microcode version major */
-		u8 minor;       	/* The microcode version minor */
-		u8 revision;		/* The microcode version revision */
-		u8 padding;		/* Reserved, for alignment */
-		u8 reserved[4];		/* Reserved, for future expansion */
-	} __attribute__ ((packed)) microcode[1];
-	/* All microcode binaries should be located here */
-	/* CRC32 should be located here, after the microcode binaries */
-} __attribute__ ((packed));
-
-struct qe_firmware_info {
-	char id[64];		/* Firmware name */
-	u32 vtraps[8];		/* Virtual trap addresses */
-	u64 extended_modes;	/* Extended modes */
-};
-
-/* Upload a firmware to the QE */
-int qe_upload_firmware(const struct qe_firmware *firmware);
-
-/* Obtain information on the uploaded firmware */
-struct qe_firmware_info *qe_get_firmware_info(void);
-
-/* QE USB */
-int qe_usb_clock_set(enum qe_clock clk, int rate);
-
-/* Buffer descriptors */
-struct qe_bd {
-	__be16 status;
-	__be16 length;
-	__be32 buf;
-} __attribute__ ((packed));
-
-#define BD_STATUS_MASK	0xffff0000
-#define BD_LENGTH_MASK	0x0000ffff
-
-/* Alignment */
-#define QE_INTR_TABLE_ALIGN	16	/* ??? */
-#define QE_ALIGNMENT_OF_BD	8
-#define QE_ALIGNMENT_OF_PRAM	64
-
-/* RISC allocation */
-enum qe_risc_allocation {
-	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
-	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
-	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
-						   RISC 1 or RISC 2 */
-};
-
-/* QE extended filtering Table Lookup Key Size */
-enum qe_fltr_tbl_lookup_key_size {
-	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
-				   CMD is truncated to 8 bytes */
-	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
-				   CMD is truncated to 16 bytes */
-};
-
-/* QE FLTR extended filtering Largest External Table Lookup Key Size */
-enum qe_fltr_largest_external_tbl_lookup_key_size {
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
-		= 0x0,/* not used */
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
-};
-
-/* structure representing QE parameter RAM */
-struct qe_timer_tables {
-	u16 tm_base;		/* QE timer table base adr */
-	u16 tm_ptr;		/* QE timer table pointer */
-	u16 r_tmr;		/* QE timer mode register */
-	u16 r_tmv;		/* QE timer valid register */
-	u32 tm_cmd;		/* QE timer cmd register */
-	u32 tm_cnt;		/* QE timer internal cnt */
-} __attribute__ ((packed));
-
-#define QE_FLTR_TAD_SIZE	8
-
-/* QE extended filtering Termination Action Descriptor (TAD) */
-struct qe_fltr_tad {
-	u8 serialized[QE_FLTR_TAD_SIZE];
-} __attribute__ ((packed));
-
-/* Communication Direction */
-enum comm_dir {
-	COMM_DIR_NONE = 0,
-	COMM_DIR_RX = 1,
-	COMM_DIR_TX = 2,
-	COMM_DIR_RX_AND_TX = 3
-};
-
-/* QE CMXUCR Registers.
- * There are two UCCs represented in each of the four CMXUCR registers.
- * These values are for the UCC in the LSBs
- */
-#define QE_CMXUCR_MII_ENET_MNG		0x00007000
-#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
-#define QE_CMXUCR_GRANT			0x00008000
-#define QE_CMXUCR_TSA			0x00004000
-#define QE_CMXUCR_BKPT			0x00000100
-#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
-
-/* QE CMXGCR Registers.
-*/
-#define QE_CMXGCR_MII_ENET_MNG		0x00007000
-#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
-#define QE_CMXGCR_USBCS			0x0000000f
-#define QE_CMXGCR_USBCS_CLK3		0x1
-#define QE_CMXGCR_USBCS_CLK5		0x2
-#define QE_CMXGCR_USBCS_CLK7		0x3
-#define QE_CMXGCR_USBCS_CLK9		0x4
-#define QE_CMXGCR_USBCS_CLK13		0x5
-#define QE_CMXGCR_USBCS_CLK17		0x6
-#define QE_CMXGCR_USBCS_CLK19		0x7
-#define QE_CMXGCR_USBCS_CLK21		0x8
-#define QE_CMXGCR_USBCS_BRG9		0x9
-#define QE_CMXGCR_USBCS_BRG10		0xa
-
-/* QE CECR Commands.
-*/
-#define QE_CR_FLG			0x00010000
-#define QE_RESET			0x80000000
-#define QE_INIT_TX_RX			0x00000000
-#define QE_INIT_RX			0x00000001
-#define QE_INIT_TX			0x00000002
-#define QE_ENTER_HUNT_MODE		0x00000003
-#define QE_STOP_TX			0x00000004
-#define QE_GRACEFUL_STOP_TX		0x00000005
-#define QE_RESTART_TX			0x00000006
-#define QE_CLOSE_RX_BD			0x00000007
-#define QE_SWITCH_COMMAND		0x00000007
-#define QE_SET_GROUP_ADDRESS		0x00000008
-#define QE_START_IDMA			0x00000009
-#define QE_MCC_STOP_RX			0x00000009
-#define QE_ATM_TRANSMIT			0x0000000a
-#define QE_HPAC_CLEAR_ALL		0x0000000b
-#define QE_GRACEFUL_STOP_RX		0x0000001a
-#define QE_RESTART_RX			0x0000001b
-#define QE_HPAC_SET_PRIORITY		0x0000010b
-#define QE_HPAC_STOP_TX			0x0000020b
-#define QE_HPAC_STOP_RX			0x0000030b
-#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
-#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
-#define QE_HPAC_START_TX		0x0000060b
-#define QE_HPAC_START_RX		0x0000070b
-#define QE_USB_STOP_TX			0x0000000a
-#define QE_USB_RESTART_TX		0x0000000c
-#define QE_QMC_STOP_TX			0x0000000c
-#define QE_QMC_STOP_RX			0x0000000d
-#define QE_SS7_SU_FIL_RESET		0x0000000e
-/* jonathbr added from here down for 83xx */
-#define QE_RESET_BCS			0x0000000a
-#define QE_MCC_INIT_TX_RX_16		0x00000003
-#define QE_MCC_STOP_TX			0x00000004
-#define QE_MCC_INIT_TX_1		0x00000005
-#define QE_MCC_INIT_RX_1		0x00000006
-#define QE_MCC_RESET			0x00000007
-#define QE_SET_TIMER			0x00000008
-#define QE_RANDOM_NUMBER		0x0000000c
-#define QE_ATM_MULTI_THREAD_INIT	0x00000011
-#define QE_ASSIGN_PAGE			0x00000012
-#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
-#define QE_START_FLOW_CONTROL		0x00000014
-#define QE_STOP_FLOW_CONTROL		0x00000015
-#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
-
-#define QE_ASSIGN_RISC			0x00000010
-#define QE_CR_MCN_NORMAL_SHIFT		6
-#define QE_CR_MCN_USB_SHIFT		4
-#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
-#define QE_CR_SNUM_SHIFT		17
-
-/* QE CECR Sub Block - sub block of QE command.
-*/
-#define QE_CR_SUBBLOCK_INVALID		0x00000000
-#define QE_CR_SUBBLOCK_USB		0x03200000
-#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
-#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
-#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
-#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
-#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
-#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
-#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
-#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
-#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
-#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
-#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
-#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
-#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
-#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
-#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
-#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
-#define QE_CR_SUBBLOCK_MCC1		0x03800000
-#define QE_CR_SUBBLOCK_MCC2		0x03a00000
-#define QE_CR_SUBBLOCK_MCC3		0x03000000
-#define QE_CR_SUBBLOCK_IDMA1		0x02800000
-#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
-#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
-#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
-#define QE_CR_SUBBLOCK_HPAC		0x01e00000
-#define QE_CR_SUBBLOCK_SPI1		0x01400000
-#define QE_CR_SUBBLOCK_SPI2		0x01600000
-#define QE_CR_SUBBLOCK_RAND		0x01c00000
-#define QE_CR_SUBBLOCK_TIMER		0x01e00000
-#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
-
-/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
-#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
-#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
-#define QE_CR_PROTOCOL_QMC		0x02
-#define QE_CR_PROTOCOL_UART		0x04
-#define QE_CR_PROTOCOL_ATM_POS		0x0A
-#define QE_CR_PROTOCOL_ETHERNET		0x0C
-#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
-
-/* BRG configuration register */
-#define QE_BRGC_ENABLE		0x00010000
-#define QE_BRGC_DIVISOR_SHIFT	1
-#define QE_BRGC_DIVISOR_MAX	0xFFF
-#define QE_BRGC_DIV16		1
-
-/* QE Timers registers */
-#define QE_GTCFR1_PCAS	0x80
-#define QE_GTCFR1_STP2	0x20
-#define QE_GTCFR1_RST2	0x10
-#define QE_GTCFR1_GM2	0x08
-#define QE_GTCFR1_GM1	0x04
-#define QE_GTCFR1_STP1	0x02
-#define QE_GTCFR1_RST1	0x01
-
-/* SDMA registers */
-#define QE_SDSR_BER1	0x02000000
-#define QE_SDSR_BER2	0x01000000
-
-#define QE_SDMR_GLB_1_MSK	0x80000000
-#define QE_SDMR_ADR_SEL		0x20000000
-#define QE_SDMR_BER1_MSK	0x02000000
-#define QE_SDMR_BER2_MSK	0x01000000
-#define QE_SDMR_EB1_MSK		0x00800000
-#define QE_SDMR_ER1_MSK		0x00080000
-#define QE_SDMR_ER2_MSK		0x00040000
-#define QE_SDMR_CEN_MASK	0x0000E000
-#define QE_SDMR_SBER_1		0x00000200
-#define QE_SDMR_SBER_2		0x00000200
-#define QE_SDMR_EB1_PR_MASK	0x000000C0
-#define QE_SDMR_ER1_PR		0x00000008
-
-#define QE_SDMR_CEN_SHIFT	13
-#define QE_SDMR_EB1_PR_SHIFT	6
-
-#define QE_SDTM_MSNUM_SHIFT	24
-
-#define QE_SDEBCR_BA_MASK	0x01FFFFFF
-
-/* Communication Processor */
-#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
-#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
-#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
-
-/* I-RAM */
-#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
-#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
-
-/* UPC */
-#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
-#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
-#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
-#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
-#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
-
-/* UCC GUEMR register */
-#define UCC_GUEMR_MODE_MASK_RX	0x02
-#define UCC_GUEMR_MODE_FAST_RX	0x02
-#define UCC_GUEMR_MODE_SLOW_RX	0x00
-#define UCC_GUEMR_MODE_MASK_TX	0x01
-#define UCC_GUEMR_MODE_FAST_TX	0x01
-#define UCC_GUEMR_MODE_SLOW_TX	0x00
-#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
-#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
-					   must be set 1 */
-
-/* structure representing UCC SLOW parameter RAM */
-struct ucc_slow_pram {
-	__be16 rbase;		/* RX BD base address */
-	__be16 tbase;		/* TX BD base address */
-	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
-	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
-	__be16 mrblr;		/* Rx buffer length */
-	__be32 rstate;		/* Rx internal state */
-	__be32 rptr;		/* Rx internal data pointer */
-	__be16 rbptr;		/* rb BD Pointer */
-	__be16 rcount;		/* Rx internal byte count */
-	__be32 rtemp;		/* Rx temp */
-	__be32 tstate;		/* Tx internal state */
-	__be32 tptr;		/* Tx internal data pointer */
-	__be16 tbptr;		/* Tx BD pointer */
-	__be16 tcount;		/* Tx byte count */
-	__be32 ttemp;		/* Tx temp */
-	__be32 rcrc;		/* temp receive CRC */
-	__be32 tcrc;		/* temp transmit CRC */
-} __attribute__ ((packed));
-
-/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
-#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
-#define UCC_SLOW_GUMR_H_REVD		0x00002000
-#define UCC_SLOW_GUMR_H_TRX		0x00001000
-#define UCC_SLOW_GUMR_H_TTX		0x00000800
-#define UCC_SLOW_GUMR_H_CDP		0x00000400
-#define UCC_SLOW_GUMR_H_CTSP		0x00000200
-#define UCC_SLOW_GUMR_H_CDS		0x00000100
-#define UCC_SLOW_GUMR_H_CTSS		0x00000080
-#define UCC_SLOW_GUMR_H_TFL		0x00000040
-#define UCC_SLOW_GUMR_H_RFW		0x00000020
-#define UCC_SLOW_GUMR_H_TXSY		0x00000010
-#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
-#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
-#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
-#define UCC_SLOW_GUMR_H_RTSM		0x00000002
-#define UCC_SLOW_GUMR_H_RSYN		0x00000001
-
-#define UCC_SLOW_GUMR_L_TCI		0x10000000
-#define UCC_SLOW_GUMR_L_RINV		0x02000000
-#define UCC_SLOW_GUMR_L_TINV		0x01000000
-#define UCC_SLOW_GUMR_L_TEND		0x00040000
-#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
-#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
-#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
-#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
-#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
-#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
-#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
-#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
-#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
-#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
-#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
-#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
-#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
-#define UCC_SLOW_GUMR_L_ENR		0x00000020
-#define UCC_SLOW_GUMR_L_ENT		0x00000010
-#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
-#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
-#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
-#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
-#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
-
-/* General UCC FAST Mode Register */
-#define UCC_FAST_GUMR_TCI	0x20000000
-#define UCC_FAST_GUMR_TRX	0x10000000
-#define UCC_FAST_GUMR_TTX	0x08000000
-#define UCC_FAST_GUMR_CDP	0x04000000
-#define UCC_FAST_GUMR_CTSP	0x02000000
-#define UCC_FAST_GUMR_CDS	0x01000000
-#define UCC_FAST_GUMR_CTSS	0x00800000
-#define UCC_FAST_GUMR_TXSY	0x00020000
-#define UCC_FAST_GUMR_RSYN	0x00010000
-#define UCC_FAST_GUMR_RTSM	0x00002000
-#define UCC_FAST_GUMR_REVD	0x00000400
-#define UCC_FAST_GUMR_ENR	0x00000020
-#define UCC_FAST_GUMR_ENT	0x00000010
-
-/* UART Slow UCC Event Register (UCCE) */
-#define UCC_UART_UCCE_AB	0x0200
-#define UCC_UART_UCCE_IDLE	0x0100
-#define UCC_UART_UCCE_GRA	0x0080
-#define UCC_UART_UCCE_BRKE	0x0040
-#define UCC_UART_UCCE_BRKS	0x0020
-#define UCC_UART_UCCE_CCR	0x0008
-#define UCC_UART_UCCE_BSY	0x0004
-#define UCC_UART_UCCE_TX	0x0002
-#define UCC_UART_UCCE_RX	0x0001
-
-/* HDLC Slow UCC Event Register (UCCE) */
-#define UCC_HDLC_UCCE_GLR	0x1000
-#define UCC_HDLC_UCCE_GLT	0x0800
-#define UCC_HDLC_UCCE_IDLE	0x0100
-#define UCC_HDLC_UCCE_BRKE	0x0040
-#define UCC_HDLC_UCCE_BRKS	0x0020
-#define UCC_HDLC_UCCE_TXE	0x0010
-#define UCC_HDLC_UCCE_RXF	0x0008
-#define UCC_HDLC_UCCE_BSY	0x0004
-#define UCC_HDLC_UCCE_TXB	0x0002
-#define UCC_HDLC_UCCE_RXB	0x0001
-
-/* BISYNC Slow UCC Event Register (UCCE) */
-#define UCC_BISYNC_UCCE_GRA	0x0080
-#define UCC_BISYNC_UCCE_TXE	0x0010
-#define UCC_BISYNC_UCCE_RCH	0x0008
-#define UCC_BISYNC_UCCE_BSY	0x0004
-#define UCC_BISYNC_UCCE_TXB	0x0002
-#define UCC_BISYNC_UCCE_RXB	0x0001
-
-/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
-#define UCC_GETH_UCCE_MPD       0x80000000
-#define UCC_GETH_UCCE_SCAR      0x40000000
-#define UCC_GETH_UCCE_GRA       0x20000000
-#define UCC_GETH_UCCE_CBPR      0x10000000
-#define UCC_GETH_UCCE_BSY       0x08000000
-#define UCC_GETH_UCCE_RXC       0x04000000
-#define UCC_GETH_UCCE_TXC       0x02000000
-#define UCC_GETH_UCCE_TXE       0x01000000
-#define UCC_GETH_UCCE_TXB7      0x00800000
-#define UCC_GETH_UCCE_TXB6      0x00400000
-#define UCC_GETH_UCCE_TXB5      0x00200000
-#define UCC_GETH_UCCE_TXB4      0x00100000
-#define UCC_GETH_UCCE_TXB3      0x00080000
-#define UCC_GETH_UCCE_TXB2      0x00040000
-#define UCC_GETH_UCCE_TXB1      0x00020000
-#define UCC_GETH_UCCE_TXB0      0x00010000
-#define UCC_GETH_UCCE_RXB7      0x00008000
-#define UCC_GETH_UCCE_RXB6      0x00004000
-#define UCC_GETH_UCCE_RXB5      0x00002000
-#define UCC_GETH_UCCE_RXB4      0x00001000
-#define UCC_GETH_UCCE_RXB3      0x00000800
-#define UCC_GETH_UCCE_RXB2      0x00000400
-#define UCC_GETH_UCCE_RXB1      0x00000200
-#define UCC_GETH_UCCE_RXB0      0x00000100
-#define UCC_GETH_UCCE_RXF7      0x00000080
-#define UCC_GETH_UCCE_RXF6      0x00000040
-#define UCC_GETH_UCCE_RXF5      0x00000020
-#define UCC_GETH_UCCE_RXF4      0x00000010
-#define UCC_GETH_UCCE_RXF3      0x00000008
-#define UCC_GETH_UCCE_RXF2      0x00000004
-#define UCC_GETH_UCCE_RXF1      0x00000002
-#define UCC_GETH_UCCE_RXF0      0x00000001
-
-/* UPSMR, when used as a UART */
-#define UCC_UART_UPSMR_FLC		0x8000
-#define UCC_UART_UPSMR_SL		0x4000
-#define UCC_UART_UPSMR_CL_MASK		0x3000
-#define UCC_UART_UPSMR_CL_8		0x3000
-#define UCC_UART_UPSMR_CL_7		0x2000
-#define UCC_UART_UPSMR_CL_6		0x1000
-#define UCC_UART_UPSMR_CL_5		0x0000
-#define UCC_UART_UPSMR_UM_MASK		0x0c00
-#define UCC_UART_UPSMR_UM_NORMAL	0x0000
-#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
-#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
-#define UCC_UART_UPSMR_FRZ		0x0200
-#define UCC_UART_UPSMR_RZS		0x0100
-#define UCC_UART_UPSMR_SYN		0x0080
-#define UCC_UART_UPSMR_DRT		0x0040
-#define UCC_UART_UPSMR_PEN		0x0010
-#define UCC_UART_UPSMR_RPM_MASK		0x000c
-#define UCC_UART_UPSMR_RPM_ODD		0x0000
-#define UCC_UART_UPSMR_RPM_LOW		0x0004
-#define UCC_UART_UPSMR_RPM_EVEN		0x0008
-#define UCC_UART_UPSMR_RPM_HIGH		0x000C
-#define UCC_UART_UPSMR_TPM_MASK		0x0003
-#define UCC_UART_UPSMR_TPM_ODD		0x0000
-#define UCC_UART_UPSMR_TPM_LOW		0x0001
-#define UCC_UART_UPSMR_TPM_EVEN		0x0002
-#define UCC_UART_UPSMR_TPM_HIGH		0x0003
-
-/* UCC Transmit On Demand Register (UTODR) */
-#define UCC_SLOW_TOD	0x8000
-#define UCC_FAST_TOD	0x8000
-
-/* UCC Bus Mode Register masks */
-/* Not to be confused with the Bundle Mode Register */
-#define UCC_BMR_GBL		0x20
-#define UCC_BMR_BO_BE		0x10
-#define UCC_BMR_CETM		0x04
-#define UCC_BMR_DTB		0x02
-#define UCC_BMR_BDB		0x01
-
-/* Function code masks */
-#define FC_GBL				0x20
-#define FC_DTB_LCL			0x02
-#define UCC_FAST_FUNCTION_CODE_GBL	0x20
-#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
-#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h
deleted file mode 100644
index a779b2c9eaf1..000000000000
--- a/include/asm-powerpc/qe_ic.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * include/asm-powerpc/qe_ic.h
- *
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE IC external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_IC_H
-#define _ASM_POWERPC_QE_IC_H
-
-#include <linux/irq.h>
-
-#define NUM_OF_QE_IC_GROUPS	6
-
-/* Flags when we init the QE IC */
-#define QE_IC_SPREADMODE_GRP_W			0x00000001
-#define QE_IC_SPREADMODE_GRP_X			0x00000002
-#define QE_IC_SPREADMODE_GRP_Y			0x00000004
-#define QE_IC_SPREADMODE_GRP_Z			0x00000008
-#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
-#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
-
-#define QE_IC_LOW_SIGNAL			0x00000100
-#define QE_IC_HIGH_SIGNAL			0x00000200
-
-#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
-#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
-#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
-#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
-#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
-#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
-#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
-#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
-#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
-#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
-#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
-#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
-#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
-
-/* QE interrupt sources groups */
-enum qe_ic_grp_id {
-	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
-	QE_IC_GRP_X,		/* QE interrupt controller group X */
-	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
-	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
-	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
-	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
-};
-
-void qe_ic_init(struct device_node *node, unsigned int flags,
-		void (*low_handler)(unsigned int irq, struct irq_desc *desc),
-		void (*high_handler)(unsigned int irq, struct irq_desc *desc));
-void qe_ic_set_highest_priority(unsigned int virq, int high);
-int qe_ic_set_priority(unsigned int virq, unsigned int priority);
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
-
-struct qe_ic;
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
-
-static inline void qe_ic_cascade_low_ipic(unsigned int irq,
-					  struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = desc->handler_data;
-	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_high_ipic(unsigned int irq,
-					   struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = desc->handler_data;
-	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_low_mpic(unsigned int irq,
-					  struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = desc->handler_data;
-	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	desc->chip->eoi(irq);
-}
-
-static inline void qe_ic_cascade_high_mpic(unsigned int irq,
-					   struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = desc->handler_data;
-	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	desc->chip->eoi(irq);
-}
-
-static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
-					    struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = desc->handler_data;
-	unsigned int cascade_irq;
-
-	cascade_irq = qe_ic_get_high_irq(qe_ic);
-	if (cascade_irq == NO_IRQ)
-		cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	desc->chip->eoi(irq);
-}
-
-#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
deleted file mode 100644
index bbccadfee0d6..000000000000
--- a/include/asm-powerpc/reg.h
+++ /dev/null
@@ -1,784 +0,0 @@
-/*
- * Contains the definition of registers common to all PowerPC variants.
- * If a register definition has been changed in a different PowerPC
- * variant, we will case it in #ifndef XXX ... #endif, and have the
- * number used in the Programming Environments Manual For 32-Bit
- * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
- */
-
-#ifndef _ASM_POWERPC_REG_H
-#define _ASM_POWERPC_REG_H
-#ifdef __KERNEL__
-
-#include <linux/stringify.h>
-#include <asm/cputable.h>
-
-/* Pickup Book E specific registers. */
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-#include <asm/reg_booke.h>
-#endif /* CONFIG_BOOKE || CONFIG_40x */
-
-#ifdef CONFIG_FSL_EMB_PERFMON
-#include <asm/reg_fsl_emb.h>
-#endif
-
-#ifdef CONFIG_8xx
-#include <asm/reg_8xx.h>
-#endif /* CONFIG_8xx */
-
-#define MSR_SF_LG	63              /* Enable 64 bit mode */
-#define MSR_ISF_LG	61              /* Interrupt 64b mode valid on 630 */
-#define MSR_HV_LG 	60              /* Hypervisor state */
-#define MSR_VEC_LG	25	        /* Enable AltiVec */
-#define MSR_VSX_LG	23		/* Enable VSX */
-#define MSR_POW_LG	18		/* Enable Power Management */
-#define MSR_WE_LG	18		/* Wait State Enable */
-#define MSR_TGPR_LG	17		/* TLB Update registers in use */
-#define MSR_CE_LG	17		/* Critical Interrupt Enable */
-#define MSR_ILE_LG	16		/* Interrupt Little Endian */
-#define MSR_EE_LG	15		/* External Interrupt Enable */
-#define MSR_PR_LG	14		/* Problem State / Privilege Level */
-#define MSR_FP_LG	13		/* Floating Point enable */
-#define MSR_ME_LG	12		/* Machine Check Enable */
-#define MSR_FE0_LG	11		/* Floating Exception mode 0 */
-#define MSR_SE_LG	10		/* Single Step */
-#define MSR_BE_LG	9		/* Branch Trace */
-#define MSR_DE_LG	9 		/* Debug Exception Enable */
-#define MSR_FE1_LG	8		/* Floating Exception mode 1 */
-#define MSR_IP_LG	6		/* Exception prefix 0x000/0xFFF */
-#define MSR_IR_LG	5 		/* Instruction Relocate */
-#define MSR_DR_LG	4 		/* Data Relocate */
-#define MSR_PE_LG	3		/* Protection Enable */
-#define MSR_PX_LG	2		/* Protection Exclusive Mode */
-#define MSR_PMM_LG	2		/* Performance monitor */
-#define MSR_RI_LG	1		/* Recoverable Exception */
-#define MSR_LE_LG	0 		/* Little Endian */
-
-#ifdef __ASSEMBLY__
-#define __MASK(X)	(1<<(X))
-#else
-#define __MASK(X)	(1UL<<(X))
-#endif
-
-#ifdef CONFIG_PPC64
-#define MSR_SF		__MASK(MSR_SF_LG)	/* Enable 64 bit mode */
-#define MSR_ISF		__MASK(MSR_ISF_LG)	/* Interrupt 64b mode valid on 630 */
-#define MSR_HV 		__MASK(MSR_HV_LG)	/* Hypervisor state */
-#else
-/* so tests for these bits fail on 32-bit */
-#define MSR_SF		0
-#define MSR_ISF		0
-#define MSR_HV		0
-#endif
-
-#define MSR_VEC		__MASK(MSR_VEC_LG)	/* Enable AltiVec */
-#define MSR_VSX		__MASK(MSR_VSX_LG)	/* Enable VSX */
-#define MSR_POW		__MASK(MSR_POW_LG)	/* Enable Power Management */
-#define MSR_WE		__MASK(MSR_WE_LG)	/* Wait State Enable */
-#define MSR_TGPR	__MASK(MSR_TGPR_LG)	/* TLB Update registers in use */
-#define MSR_CE		__MASK(MSR_CE_LG)	/* Critical Interrupt Enable */
-#define MSR_ILE		__MASK(MSR_ILE_LG)	/* Interrupt Little Endian */
-#define MSR_EE		__MASK(MSR_EE_LG)	/* External Interrupt Enable */
-#define MSR_PR		__MASK(MSR_PR_LG)	/* Problem State / Privilege Level */
-#define MSR_FP		__MASK(MSR_FP_LG)	/* Floating Point enable */
-#define MSR_ME		__MASK(MSR_ME_LG)	/* Machine Check Enable */
-#define MSR_FE0		__MASK(MSR_FE0_LG)	/* Floating Exception mode 0 */
-#define MSR_SE		__MASK(MSR_SE_LG)	/* Single Step */
-#define MSR_BE		__MASK(MSR_BE_LG)	/* Branch Trace */
-#define MSR_DE		__MASK(MSR_DE_LG)	/* Debug Exception Enable */
-#define MSR_FE1		__MASK(MSR_FE1_LG)	/* Floating Exception mode 1 */
-#define MSR_IP		__MASK(MSR_IP_LG)	/* Exception prefix 0x000/0xFFF */
-#define MSR_IR		__MASK(MSR_IR_LG)	/* Instruction Relocate */
-#define MSR_DR		__MASK(MSR_DR_LG)	/* Data Relocate */
-#define MSR_PE		__MASK(MSR_PE_LG)	/* Protection Enable */
-#define MSR_PX		__MASK(MSR_PX_LG)	/* Protection Exclusive Mode */
-#ifndef MSR_PMM
-#define MSR_PMM		__MASK(MSR_PMM_LG)	/* Performance monitor */
-#endif
-#define MSR_RI		__MASK(MSR_RI_LG)	/* Recoverable Exception */
-#define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
-
-#ifdef CONFIG_PPC64
-#define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
-#define MSR_KERNEL      MSR_ | MSR_SF
-
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_SF
-
-#else /* 32-bit */
-/* Default MSR for kernel mode. */
-#ifndef MSR_KERNEL	/* reg_booke.h also defines this */
-#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
-#endif
-
-#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
-#endif
-
-/* Floating Point Status and Control Register (FPSCR) Fields */
-#define FPSCR_FX	0x80000000	/* FPU exception summary */
-#define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
-#define FPSCR_VX	0x20000000	/* Invalid operation summary */
-#define FPSCR_OX	0x10000000	/* Overflow exception summary */
-#define FPSCR_UX	0x08000000	/* Underflow exception summary */
-#define FPSCR_ZX	0x04000000	/* Zero-divide exception summary */
-#define FPSCR_XX	0x02000000	/* Inexact exception summary */
-#define FPSCR_VXSNAN	0x01000000	/* Invalid op for SNaN */
-#define FPSCR_VXISI	0x00800000	/* Invalid op for Inv - Inv */
-#define FPSCR_VXIDI	0x00400000	/* Invalid op for Inv / Inv */
-#define FPSCR_VXZDZ	0x00200000	/* Invalid op for Zero / Zero */
-#define FPSCR_VXIMZ	0x00100000	/* Invalid op for Inv * Zero */
-#define FPSCR_VXVC	0x00080000	/* Invalid op for Compare */
-#define FPSCR_FR	0x00040000	/* Fraction rounded */
-#define FPSCR_FI	0x00020000	/* Fraction inexact */
-#define FPSCR_FPRF	0x0001f000	/* FPU Result Flags */
-#define FPSCR_FPCC	0x0000f000	/* FPU Condition Codes */
-#define FPSCR_VXSOFT	0x00000400	/* Invalid op for software request */
-#define FPSCR_VXSQRT	0x00000200	/* Invalid op for square root */
-#define FPSCR_VXCVI	0x00000100	/* Invalid op for integer convert */
-#define FPSCR_VE	0x00000080	/* Invalid op exception enable */
-#define FPSCR_OE	0x00000040	/* IEEE overflow exception enable */
-#define FPSCR_UE	0x00000020	/* IEEE underflow exception enable */
-#define FPSCR_ZE	0x00000010	/* IEEE zero divide exception enable */
-#define FPSCR_XE	0x00000008	/* FP inexact exception enable */
-#define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
-#define FPSCR_RN	0x00000003	/* FPU rounding control */
-
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_CTR	0x009	/* Count Register */
-#define SPRN_DSCR	0x11
-#define SPRN_CTRLF	0x088
-#define SPRN_CTRLT	0x098
-#define   CTRL_CT	0xc0000000	/* current thread */
-#define   CTRL_CT0	0x80000000	/* thread 0 */
-#define   CTRL_CT1	0x40000000	/* thread 1 */
-#define   CTRL_TE	0x00c00000	/* thread enable */
-#define   CTRL_RUNLATCH	0x1
-#define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
-#define   DABR_TRANSLATION	(1UL << 2)
-#define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
-#define   DABRX_USER	(1UL << 0)
-#define   DABRX_KERNEL	(1UL << 1)
-#define SPRN_DAR	0x013	/* Data Address Register */
-#define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
-#define   DSISR_NOHPTE		0x40000000	/* no translation found */
-#define   DSISR_PROTFAULT	0x08000000	/* protection fault */
-#define   DSISR_ISSTORE		0x02000000	/* access was a store */
-#define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
-#define   DSISR_NOSEGMENT	0x00200000	/* STAB/SLB miss */
-#define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
-#define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
-#define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
-#define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
-#define SPRN_SPURR	0x134	/* Scaled PURR */
-#define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
-#define SPRN_LPCR	0x13E	/* LPAR Control Register */
-#define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
-#define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
-#define SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
-#define SPRN_DBAT1U	0x21A	/* Data BAT 1 Upper Register */
-#define SPRN_DBAT2L	0x21D	/* Data BAT 2 Lower Register */
-#define SPRN_DBAT2U	0x21C	/* Data BAT 2 Upper Register */
-#define SPRN_DBAT3L	0x21F	/* Data BAT 3 Lower Register */
-#define SPRN_DBAT3U	0x21E	/* Data BAT 3 Upper Register */
-#define SPRN_DBAT4L	0x239	/* Data BAT 4 Lower Register */
-#define SPRN_DBAT4U	0x238	/* Data BAT 4 Upper Register */
-#define SPRN_DBAT5L	0x23B	/* Data BAT 5 Lower Register */
-#define SPRN_DBAT5U	0x23A	/* Data BAT 5 Upper Register */
-#define SPRN_DBAT6L	0x23D	/* Data BAT 6 Lower Register */
-#define SPRN_DBAT6U	0x23C	/* Data BAT 6 Upper Register */
-#define SPRN_DBAT7L	0x23F	/* Data BAT 7 Lower Register */
-#define SPRN_DBAT7U	0x23E	/* Data BAT 7 Upper Register */
-
-#define SPRN_DEC	0x016		/* Decrement Register */
-#define SPRN_DER	0x095		/* Debug Enable Regsiter */
-#define DER_RSTE	0x40000000	/* Reset Interrupt */
-#define DER_CHSTPE	0x20000000	/* Check Stop */
-#define DER_MCIE	0x10000000	/* Machine Check Interrupt */
-#define DER_EXTIE	0x02000000	/* External Interrupt */
-#define DER_ALIE	0x01000000	/* Alignment Interrupt */
-#define DER_PRIE	0x00800000	/* Program Interrupt */
-#define DER_FPUVIE	0x00400000	/* FP Unavailable Interrupt */
-#define DER_DECIE	0x00200000	/* Decrementer Interrupt */
-#define DER_SYSIE	0x00040000	/* System Call Interrupt */
-#define DER_TRE		0x00020000	/* Trace Interrupt */
-#define DER_SEIE	0x00004000	/* FP SW Emulation Interrupt */
-#define DER_ITLBMSE	0x00002000	/* Imp. Spec. Instruction TLB Miss */
-#define DER_ITLBERE	0x00001000	/* Imp. Spec. Instruction TLB Error */
-#define DER_DTLBMSE	0x00000800	/* Imp. Spec. Data TLB Miss */
-#define DER_DTLBERE	0x00000400	/* Imp. Spec. Data TLB Error */
-#define DER_LBRKE	0x00000008	/* Load/Store Breakpoint Interrupt */
-#define DER_IBRKE	0x00000004	/* Instruction Breakpoint Interrupt */
-#define DER_EBRKE	0x00000002	/* External Breakpoint Interrupt */
-#define DER_DPIE	0x00000001	/* Dev. Port Nonmaskable Request */
-#define SPRN_DMISS	0x3D0		/* Data TLB Miss Register */
-#define SPRN_EAR	0x11A		/* External Address Register */
-#define SPRN_HASH1	0x3D2		/* Primary Hash Address Register */
-#define SPRN_HASH2	0x3D3		/* Secondary Hash Address Resgister */
-#define SPRN_HID0	0x3F0		/* Hardware Implementation Register 0 */
-#define HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
-#define HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
-#define HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
-#define HID0_SBCLK	(1<<27)
-#define HID0_EICE	(1<<26)
-#define HID0_TBEN	(1<<26)		/* Timebase enable - 745x */
-#define HID0_ECLK	(1<<25)
-#define HID0_PAR	(1<<24)
-#define HID0_STEN	(1<<24)		/* Software table search enable - 745x */
-#define HID0_HIGH_BAT	(1<<23)		/* Enable high BATs - 7455 */
-#define HID0_DOZE	(1<<23)
-#define HID0_NAP	(1<<22)
-#define HID0_SLEEP	(1<<21)
-#define HID0_DPM	(1<<20)
-#define HID0_BHTCLR	(1<<18)		/* Clear branch history table - 7450 */
-#define HID0_XAEN	(1<<17)		/* Extended addressing enable - 7450 */
-#define HID0_NHR	(1<<16)		/* Not hard reset (software bit-7450)*/
-#define HID0_ICE	(1<<15)		/* Instruction Cache Enable */
-#define HID0_DCE	(1<<14)		/* Data Cache Enable */
-#define HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
-#define HID0_DLOCK	(1<<12)		/* Data Cache Lock */
-#define HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
-#define HID0_DCI	(1<<10)		/* Data Cache Invalidate */
-#define HID0_SPD	(1<<9)		/* Speculative disable */
-#define HID0_DAPUEN	(1<<8)		/* Debug APU enable */
-#define HID0_SGE	(1<<7)		/* Store Gathering Enable */
-#define HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
-#define HID0_DCFA	(1<<6)		/* Data Cache Flush Assist */
-#define HID0_LRSTK	(1<<4)		/* Link register stack - 745x */
-#define HID0_BTIC	(1<<5)		/* Branch Target Instr Cache Enable */
-#define HID0_ABE	(1<<3)		/* Address Broadcast Enable */
-#define HID0_FOLD	(1<<3)		/* Branch Folding enable - 745x */
-#define HID0_BHTE	(1<<2)		/* Branch History Table Enable */
-#define HID0_BTCD	(1<<1)		/* Branch target cache disable */
-#define HID0_NOPDST	(1<<1)		/* No-op dst, dstt, etc. instr. */
-#define HID0_NOPTI	(1<<0)		/* No-op dcbt and dcbst instr. */
-
-#define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
-#define HID1_EMCP	(1<<31)		/* 7450 Machine Check Pin Enable */
-#define HID1_DFS	(1<<22)		/* 7447A Dynamic Frequency Scaling */
-#define HID1_PC0	(1<<16)		/* 7450 PLL_CFG[0] */
-#define HID1_PC1	(1<<15)		/* 7450 PLL_CFG[1] */
-#define HID1_PC2	(1<<14)		/* 7450 PLL_CFG[2] */
-#define HID1_PC3	(1<<13)		/* 7450 PLL_CFG[3] */
-#define HID1_SYNCBE	(1<<11)		/* 7450 ABE for sync, eieio */
-#define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
-#define HID1_PS		(1<<16)		/* 750FX PLL selection */
-#define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
-#define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
-#define SPRN_HID4	0x3F4		/* 970 HID4 */
-#define SPRN_HID5	0x3F6		/* 970 HID5 */
-#define SPRN_HID6	0x3F9	/* BE HID 6 */
-#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
-#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
-#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
-#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
-#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
-#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
-#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
-#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
-#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */
-#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
-#define SPRN_IAC1	0x3F4		/* Instruction Address Compare 1 */
-#define SPRN_IAC2	0x3F5		/* Instruction Address Compare 2 */
-#endif
-#define SPRN_IBAT0L	0x211		/* Instruction BAT 0 Lower Register */
-#define SPRN_IBAT0U	0x210		/* Instruction BAT 0 Upper Register */
-#define SPRN_IBAT1L	0x213		/* Instruction BAT 1 Lower Register */
-#define SPRN_IBAT1U	0x212		/* Instruction BAT 1 Upper Register */
-#define SPRN_IBAT2L	0x215		/* Instruction BAT 2 Lower Register */
-#define SPRN_IBAT2U	0x214		/* Instruction BAT 2 Upper Register */
-#define SPRN_IBAT3L	0x217		/* Instruction BAT 3 Lower Register */
-#define SPRN_IBAT3U	0x216		/* Instruction BAT 3 Upper Register */
-#define SPRN_IBAT4L	0x231		/* Instruction BAT 4 Lower Register */
-#define SPRN_IBAT4U	0x230		/* Instruction BAT 4 Upper Register */
-#define SPRN_IBAT5L	0x233		/* Instruction BAT 5 Lower Register */
-#define SPRN_IBAT5U	0x232		/* Instruction BAT 5 Upper Register */
-#define SPRN_IBAT6L	0x235		/* Instruction BAT 6 Lower Register */
-#define SPRN_IBAT6U	0x234		/* Instruction BAT 6 Upper Register */
-#define SPRN_IBAT7L	0x237		/* Instruction BAT 7 Lower Register */
-#define SPRN_IBAT7U	0x236		/* Instruction BAT 7 Upper Register */
-#define SPRN_ICMP	0x3D5		/* Instruction TLB Compare Register */
-#define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
-#define SPRN_ICTRL	0x3F3	/* 1011 7450 icache and interrupt ctrl */
-#define ICTRL_EICE	0x08000000	/* enable icache parity errs */
-#define ICTRL_EDC	0x04000000	/* enable dcache parity errs */
-#define ICTRL_EICP	0x00000100	/* enable icache par. check */
-#define SPRN_IMISS	0x3D4		/* Instruction TLB Miss Register */
-#define SPRN_IMMR	0x27E		/* Internal Memory Map Register */
-#define SPRN_L2CR	0x3F9		/* Level 2 Cache Control Regsiter */
-#define SPRN_L2CR2	0x3f8
-#define L2CR_L2E		0x80000000	/* L2 enable */
-#define L2CR_L2PE		0x40000000	/* L2 parity enable */
-#define L2CR_L2SIZ_MASK		0x30000000	/* L2 size mask */
-#define L2CR_L2SIZ_256KB	0x10000000	/* L2 size 256KB */
-#define L2CR_L2SIZ_512KB	0x20000000	/* L2 size 512KB */
-#define L2CR_L2SIZ_1MB		0x30000000	/* L2 size 1MB */
-#define L2CR_L2CLK_MASK		0x0e000000	/* L2 clock mask */
-#define L2CR_L2CLK_DISABLED	0x00000000	/* L2 clock disabled */
-#define L2CR_L2CLK_DIV1		0x02000000	/* L2 clock / 1 */
-#define L2CR_L2CLK_DIV1_5	0x04000000	/* L2 clock / 1.5 */
-#define L2CR_L2CLK_DIV2		0x08000000	/* L2 clock / 2 */
-#define L2CR_L2CLK_DIV2_5	0x0a000000	/* L2 clock / 2.5 */
-#define L2CR_L2CLK_DIV3		0x0c000000	/* L2 clock / 3 */
-#define L2CR_L2RAM_MASK		0x01800000	/* L2 RAM type mask */
-#define L2CR_L2RAM_FLOW		0x00000000	/* L2 RAM flow through */
-#define L2CR_L2RAM_PIPE		0x01000000	/* L2 RAM pipelined */
-#define L2CR_L2RAM_PIPE_LW	0x01800000	/* L2 RAM pipelined latewr */
-#define L2CR_L2DO		0x00400000	/* L2 data only */
-#define L2CR_L2I		0x00200000	/* L2 global invalidate */
-#define L2CR_L2CTL		0x00100000	/* L2 RAM control */
-#define L2CR_L2WT		0x00080000	/* L2 write-through */
-#define L2CR_L2TS		0x00040000	/* L2 test support */
-#define L2CR_L2OH_MASK		0x00030000	/* L2 output hold mask */
-#define L2CR_L2OH_0_5		0x00000000	/* L2 output hold 0.5 ns */
-#define L2CR_L2OH_1_0		0x00010000	/* L2 output hold 1.0 ns */
-#define L2CR_L2SL		0x00008000	/* L2 DLL slow */
-#define L2CR_L2DF		0x00004000	/* L2 differential clock */
-#define L2CR_L2BYP		0x00002000	/* L2 DLL bypass */
-#define L2CR_L2IP		0x00000001	/* L2 GI in progress */
-#define L2CR_L2IO_745x		0x00100000	/* L2 instr. only (745x) */
-#define L2CR_L2DO_745x		0x00010000	/* L2 data only (745x) */
-#define L2CR_L2REP_745x		0x00001000	/* L2 repl. algorithm (745x) */
-#define L2CR_L2HWF_745x		0x00000800	/* L2 hardware flush (745x) */
-#define SPRN_L3CR		0x3FA	/* Level 3 Cache Control Regsiter */
-#define L3CR_L3E		0x80000000	/* L3 enable */
-#define L3CR_L3PE		0x40000000	/* L3 data parity enable */
-#define L3CR_L3APE		0x20000000	/* L3 addr parity enable */
-#define L3CR_L3SIZ		0x10000000	/* L3 size */
-#define L3CR_L3CLKEN		0x08000000	/* L3 clock enable */
-#define L3CR_L3RES		0x04000000	/* L3 special reserved bit */
-#define L3CR_L3CLKDIV		0x03800000	/* L3 clock divisor */
-#define L3CR_L3IO		0x00400000	/* L3 instruction only */
-#define L3CR_L3SPO		0x00040000	/* L3 sample point override */
-#define L3CR_L3CKSP		0x00030000	/* L3 clock sample point */
-#define L3CR_L3PSP		0x0000e000	/* L3 P-clock sample point */
-#define L3CR_L3REP		0x00001000	/* L3 replacement algorithm */
-#define L3CR_L3HWF		0x00000800	/* L3 hardware flush */
-#define L3CR_L3I		0x00000400	/* L3 global invalidate */
-#define L3CR_L3RT		0x00000300	/* L3 SRAM type */
-#define L3CR_L3NIRCA		0x00000080	/* L3 non-integer ratio clock adj. */
-#define L3CR_L3DO		0x00000040	/* L3 data only mode */
-#define L3CR_PMEN		0x00000004	/* L3 private memory enable */
-#define L3CR_PMSIZ		0x00000001	/* L3 private memory size */
-
-#define SPRN_MSSCR0	0x3f6	/* Memory Subsystem Control Register 0 */
-#define SPRN_MSSSR0	0x3f7	/* Memory Subsystem Status Register 1 */
-#define SPRN_LDSTCR	0x3f8	/* Load/Store control register */
-#define SPRN_LDSTDB	0x3f4	/* */
-#define SPRN_LR		0x008	/* Link Register */
-#ifndef SPRN_PIR
-#define SPRN_PIR	0x3FF	/* Processor Identification Register */
-#endif
-#define SPRN_PTEHI	0x3D5	/* 981 7450 PTE HI word (S/W TLB load) */
-#define SPRN_PTELO	0x3D6	/* 982 7450 PTE LO word (S/W TLB load) */
-#define SPRN_PURR	0x135	/* Processor Utilization of Resources Reg */
-#define SPRN_PVR	0x11F	/* Processor Version Register */
-#define SPRN_RPA	0x3D6	/* Required Physical Address Register */
-#define SPRN_SDA	0x3BF	/* Sampled Data Address Register */
-#define SPRN_SDR1	0x019	/* MMU Hash Base Register */
-#define SPRN_ASR	0x118   /* Address Space Register */
-#define SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
-#define SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
-#define SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
-#define SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
-#define SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
-#define SPRN_SPRG4	0x114	/* Special Purpose Register General 4 */
-#define SPRN_SPRG5	0x115	/* Special Purpose Register General 5 */
-#define SPRN_SPRG6	0x116	/* Special Purpose Register General 6 */
-#define SPRN_SPRG7	0x117	/* Special Purpose Register General 7 */
-#define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
-#define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
-#define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
-#define   SRR1_WAKERESET	0x00380000 /* System reset */
-#define   SRR1_WAKESYSERR	0x00300000 /* System error */
-#define   SRR1_WAKEEE		0x00200000 /* External interrupt */
-#define   SRR1_WAKEMT		0x00280000 /* mtctrl */
-#define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */
-#define   SRR1_WAKETHERM	0x00100000 /* Thermal management interrupt */
-#define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
-#define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
-
-#define SPRN_TBCTL	0x35f	/* PA6T Timebase control register */
-#define   TBCTL_FREEZE		0x0000000000000000ull /* Freeze all tbs */
-#define   TBCTL_RESTART		0x0000000100000000ull /* Restart all tbs */
-#define   TBCTL_UPDATE_UPPER	0x0000000200000000ull /* Set upper 32 bits */
-#define   TBCTL_UPDATE_LOWER	0x0000000300000000ull /* Set lower 32 bits */
-
-#ifndef SPRN_SVR
-#define SPRN_SVR	0x11E	/* System Version Register */
-#endif
-#define SPRN_THRM1	0x3FC		/* Thermal Management Register 1 */
-/* these bits were defined in inverted endian sense originally, ugh, confusing */
-#define THRM1_TIN	(1 << 31)
-#define THRM1_TIV	(1 << 30)
-#define THRM1_THRES(x)	((x&0x7f)<<23)
-#define THRM3_SITV(x)	((x&0x3fff)<<1)
-#define THRM1_TID	(1<<2)
-#define THRM1_TIE	(1<<1)
-#define THRM1_V		(1<<0)
-#define SPRN_THRM2	0x3FD		/* Thermal Management Register 2 */
-#define SPRN_THRM3	0x3FE		/* Thermal Management Register 3 */
-#define THRM3_E		(1<<0)
-#define SPRN_TLBMISS	0x3D4		/* 980 7450 TLB Miss Register */
-#define SPRN_UMMCR0	0x3A8	/* User Monitor Mode Control Register 0 */
-#define SPRN_UMMCR1	0x3AC	/* User Monitor Mode Control Register 0 */
-#define SPRN_UPMC1	0x3A9	/* User Performance Counter Register 1 */
-#define SPRN_UPMC2	0x3AA	/* User Performance Counter Register 2 */
-#define SPRN_UPMC3	0x3AD	/* User Performance Counter Register 3 */
-#define SPRN_UPMC4	0x3AE	/* User Performance Counter Register 4 */
-#define SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
-#define SPRN_VRSAVE	0x100	/* Vector Register Save Register */
-#define SPRN_XER	0x001	/* Fixed Point Exception Register */
-
-#define SPRN_SCOMC	0x114	/* SCOM Access Control */
-#define SPRN_SCOMD	0x115	/* SCOM Access DATA */
-
-/* Performance monitor SPRs */
-#ifdef CONFIG_PPC64
-#define SPRN_MMCR0	795
-#define   MMCR0_FC	0x80000000UL /* freeze counters */
-#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
-#define   MMCR0_KERNEL_DISABLE MMCR0_FCS
-#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
-#define   MMCR0_PROBLEM_DISABLE MMCR0_FCP
-#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
-#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
-#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
-#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
-#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
-#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
-#define   MMCR0_PMCjCE	0x00004000UL /* PMCj count enable*/
-#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
-#define   MMCR0_PMAO	0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
-#define   MMCR0_SHRFC	0x00000040UL /* SHRre freeze conditions between threads */
-#define   MMCR0_FCTI	0x00000008UL /* freeze counters in tags inactive mode */
-#define   MMCR0_FCTA	0x00000004UL /* freeze counters in tags active mode */
-#define   MMCR0_FCWAIT	0x00000002UL /* freeze counter in WAIT state */
-#define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
-#define SPRN_MMCR1	798
-#define SPRN_MMCRA	0x312
-#define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
-#define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
-#define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */
-#define   MMCRA_SLOT_SHIFT	24
-#define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
-#define   POWER6_MMCRA_SIHV   0x0000040000000000ULL
-#define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
-#define   POWER6_MMCRA_THRM	0x00000020UL
-#define   POWER6_MMCRA_OTHER	0x0000000EUL
-#define SPRN_PMC1	787
-#define SPRN_PMC2	788
-#define SPRN_PMC3	789
-#define SPRN_PMC4	790
-#define SPRN_PMC5	791
-#define SPRN_PMC6	792
-#define SPRN_PMC7	793
-#define SPRN_PMC8	794
-#define SPRN_SIAR	780
-#define SPRN_SDAR	781
-
-#define SPRN_PA6T_MMCR0 795
-#define   PA6T_MMCR0_EN0	0x0000000000000001UL
-#define   PA6T_MMCR0_EN1	0x0000000000000002UL
-#define   PA6T_MMCR0_EN2	0x0000000000000004UL
-#define   PA6T_MMCR0_EN3	0x0000000000000008UL
-#define   PA6T_MMCR0_EN4	0x0000000000000010UL
-#define   PA6T_MMCR0_EN5	0x0000000000000020UL
-#define   PA6T_MMCR0_SUPEN	0x0000000000000040UL
-#define   PA6T_MMCR0_PREN	0x0000000000000080UL
-#define   PA6T_MMCR0_HYPEN	0x0000000000000100UL
-#define   PA6T_MMCR0_FCM0	0x0000000000000200UL
-#define   PA6T_MMCR0_FCM1	0x0000000000000400UL
-#define   PA6T_MMCR0_INTGEN	0x0000000000000800UL
-#define   PA6T_MMCR0_INTEN0	0x0000000000001000UL
-#define   PA6T_MMCR0_INTEN1	0x0000000000002000UL
-#define   PA6T_MMCR0_INTEN2	0x0000000000004000UL
-#define   PA6T_MMCR0_INTEN3	0x0000000000008000UL
-#define   PA6T_MMCR0_INTEN4	0x0000000000010000UL
-#define   PA6T_MMCR0_INTEN5	0x0000000000020000UL
-#define   PA6T_MMCR0_DISCNT	0x0000000000040000UL
-#define   PA6T_MMCR0_UOP	0x0000000000080000UL
-#define   PA6T_MMCR0_TRG	0x0000000000100000UL
-#define   PA6T_MMCR0_TRGEN	0x0000000000200000UL
-#define   PA6T_MMCR0_TRGREG	0x0000000001600000UL
-#define   PA6T_MMCR0_SIARLOG	0x0000000002000000UL
-#define   PA6T_MMCR0_SDARLOG	0x0000000004000000UL
-#define   PA6T_MMCR0_PROEN	0x0000000008000000UL
-#define   PA6T_MMCR0_PROLOG	0x0000000010000000UL
-#define   PA6T_MMCR0_DAMEN2	0x0000000020000000UL
-#define   PA6T_MMCR0_DAMEN3	0x0000000040000000UL
-#define   PA6T_MMCR0_DAMEN4	0x0000000080000000UL
-#define   PA6T_MMCR0_DAMEN5	0x0000000100000000UL
-#define   PA6T_MMCR0_DAMSEL2	0x0000000200000000UL
-#define   PA6T_MMCR0_DAMSEL3	0x0000000400000000UL
-#define   PA6T_MMCR0_DAMSEL4	0x0000000800000000UL
-#define   PA6T_MMCR0_DAMSEL5	0x0000001000000000UL
-#define   PA6T_MMCR0_HANDDIS	0x0000002000000000UL
-#define   PA6T_MMCR0_PCTEN	0x0000004000000000UL
-#define   PA6T_MMCR0_SOCEN	0x0000008000000000UL
-#define   PA6T_MMCR0_SOCMOD	0x0000010000000000UL
-
-#define SPRN_PA6T_MMCR1 798
-#define   PA6T_MMCR1_ES2	0x00000000000000ffUL
-#define   PA6T_MMCR1_ES3	0x000000000000ff00UL
-#define   PA6T_MMCR1_ES4	0x0000000000ff0000UL
-#define   PA6T_MMCR1_ES5	0x00000000ff000000UL
-
-#define SPRN_PA6T_UPMC0 771	/* User PerfMon Counter 0 */
-#define SPRN_PA6T_UPMC1 772	/* ... */
-#define SPRN_PA6T_UPMC2 773
-#define SPRN_PA6T_UPMC3 774
-#define SPRN_PA6T_UPMC4 775
-#define SPRN_PA6T_UPMC5 776
-#define SPRN_PA6T_UMMCR0 779	/* User Monitor Mode Control Register 0 */
-#define SPRN_PA6T_SIAR	780	/* Sampled Instruction Address */
-#define SPRN_PA6T_UMMCR1 782	/* User Monitor Mode Control Register 1 */
-#define SPRN_PA6T_SIER	785	/* Sampled Instruction Event Register */
-#define SPRN_PA6T_PMC0	787
-#define SPRN_PA6T_PMC1	788
-#define SPRN_PA6T_PMC2	789
-#define SPRN_PA6T_PMC3	790
-#define SPRN_PA6T_PMC4	791
-#define SPRN_PA6T_PMC5	792
-#define SPRN_PA6T_TSR0	793	/* Timestamp Register 0 */
-#define SPRN_PA6T_TSR1	794	/* Timestamp Register 1 */
-#define SPRN_PA6T_TSR2	799	/* Timestamp Register 2 */
-#define SPRN_PA6T_TSR3	784	/* Timestamp Register 3 */
-
-#define SPRN_PA6T_IER	981	/* Icache Error Register */
-#define SPRN_PA6T_DER	982	/* Dcache Error Register */
-#define SPRN_PA6T_BER	862	/* BIU Error Address Register */
-#define SPRN_PA6T_MER	849	/* MMU Error Register */
-
-#define SPRN_PA6T_IMA0	880	/* Instruction Match Array 0 */
-#define SPRN_PA6T_IMA1	881	/* ... */
-#define SPRN_PA6T_IMA2	882
-#define SPRN_PA6T_IMA3	883
-#define SPRN_PA6T_IMA4	884
-#define SPRN_PA6T_IMA5	885
-#define SPRN_PA6T_IMA6	886
-#define SPRN_PA6T_IMA7	887
-#define SPRN_PA6T_IMA8	888
-#define SPRN_PA6T_IMA9	889
-#define SPRN_PA6T_BTCR	978	/* Breakpoint and Tagging Control Register */
-#define SPRN_PA6T_IMAAT	979	/* Instruction Match Array Action Table */
-#define SPRN_PA6T_PCCR	1019	/* Power Counter Control Register */
-#define SPRN_BKMK	1020	/* Cell Bookmark Register */
-#define SPRN_PA6T_RPCCR	1021	/* Retire PC Trace Control Register */
-
-
-#else /* 32-bit */
-#define SPRN_MMCR0	952	/* Monitor Mode Control Register 0 */
-#define   MMCR0_FC	0x80000000UL /* freeze counters */
-#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
-#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
-#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
-#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
-#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
-#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
-#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
-#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
-#define   MMCR0_PMCnCE	0x00004000UL /* count enable for all but PMC 1*/
-#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
-#define   MMCR0_PMC1SEL	0x00001fc0UL /* PMC 1 Event */
-#define   MMCR0_PMC2SEL	0x0000003fUL /* PMC 2 Event */
-
-#define SPRN_MMCR1	956
-#define   MMCR1_PMC3SEL	0xf8000000UL /* PMC 3 Event */
-#define   MMCR1_PMC4SEL	0x07c00000UL /* PMC 4 Event */
-#define   MMCR1_PMC5SEL	0x003e0000UL /* PMC 5 Event */
-#define   MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
-#define SPRN_MMCR2	944
-#define SPRN_PMC1	953	/* Performance Counter Register 1 */
-#define SPRN_PMC2	954	/* Performance Counter Register 2 */
-#define SPRN_PMC3	957	/* Performance Counter Register 3 */
-#define SPRN_PMC4	958	/* Performance Counter Register 4 */
-#define SPRN_PMC5	945	/* Performance Counter Register 5 */
-#define SPRN_PMC6	946	/* Performance Counter Register 6 */
-
-#define SPRN_SIAR	955	/* Sampled Instruction Address Register */
-
-/* Bit definitions for MMCR0 and PMC1 / PMC2. */
-#define MMCR0_PMC1_CYCLES	(1 << 7)
-#define MMCR0_PMC1_ICACHEMISS	(5 << 7)
-#define MMCR0_PMC1_DTLB		(6 << 7)
-#define MMCR0_PMC2_DCACHEMISS	0x6
-#define MMCR0_PMC2_CYCLES	0x1
-#define MMCR0_PMC2_ITLB		0x7
-#define MMCR0_PMC2_LOADMISSTIME	0x5
-#endif
-
-/*
- * An mtfsf instruction with the L bit set. On CPUs that support this a
- * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
- *
- * Until binutils gets the new form of mtfsf, hardwire the instruction.
- */
-#ifdef CONFIG_PPC64
-#define MTFSF_L(REG) \
-	.long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25))
-#else
-#define MTFSF_L(REG)	mtfsf	0xff, (REG)
-#endif
-
-/* Processor Version Register (PVR) field extraction */
-
-#define PVR_VER(pvr)	(((pvr) >>  16) & 0xFFFF)	/* Version field */
-#define PVR_REV(pvr)	(((pvr) >>   0) & 0xFFFF)	/* Revison field */
-
-#define __is_processor(pv)	(PVR_VER(mfspr(SPRN_PVR)) == (pv))
-
-/*
- * IBM has further subdivided the standard PowerPC 16-bit version and
- * revision subfields of the PVR for the PowerPC 403s into the following:
- */
-
-#define PVR_FAM(pvr)	(((pvr) >> 20) & 0xFFF)	/* Family field */
-#define PVR_MEM(pvr)	(((pvr) >> 16) & 0xF)	/* Member field */
-#define PVR_CORE(pvr)	(((pvr) >> 12) & 0xF)	/* Core field */
-#define PVR_CFG(pvr)	(((pvr) >>  8) & 0xF)	/* Configuration field */
-#define PVR_MAJ(pvr)	(((pvr) >>  4) & 0xF)	/* Major revision field */
-#define PVR_MIN(pvr)	(((pvr) >>  0) & 0xF)	/* Minor revision field */
-
-/* Processor Version Numbers */
-
-#define PVR_403GA	0x00200000
-#define PVR_403GB	0x00200100
-#define PVR_403GC	0x00200200
-#define PVR_403GCX	0x00201400
-#define PVR_405GP	0x40110000
-#define PVR_STB03XXX	0x40310000
-#define PVR_NP405H	0x41410000
-#define PVR_NP405L	0x41610000
-#define PVR_601		0x00010000
-#define PVR_602		0x00050000
-#define PVR_603		0x00030000
-#define PVR_603e	0x00060000
-#define PVR_603ev	0x00070000
-#define PVR_603r	0x00071000
-#define PVR_604		0x00040000
-#define PVR_604e	0x00090000
-#define PVR_604r	0x000A0000
-#define PVR_620		0x00140000
-#define PVR_740		0x00080000
-#define PVR_750		PVR_740
-#define PVR_740P	0x10080000
-#define PVR_750P	PVR_740P
-#define PVR_7400	0x000C0000
-#define PVR_7410	0x800C0000
-#define PVR_7450	0x80000000
-#define PVR_8540	0x80200000
-#define PVR_8560	0x80200000
-/*
- * For the 8xx processors, all of them report the same PVR family for
- * the PowerPC core. The various versions of these processors must be
- * differentiated by the version number in the Communication Processor
- * Module (CPM).
- */
-#define PVR_821		0x00500000
-#define PVR_823		PVR_821
-#define PVR_850		PVR_821
-#define PVR_860		PVR_821
-#define PVR_8240	0x00810100
-#define PVR_8245	0x80811014
-#define PVR_8260	PVR_8240
-
-/* 64-bit processors */
-/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
-#define PV_NORTHSTAR	0x0033
-#define PV_PULSAR	0x0034
-#define PV_POWER4	0x0035
-#define PV_ICESTAR	0x0036
-#define PV_SSTAR	0x0037
-#define PV_POWER4p	0x0038
-#define PV_970		0x0039
-#define PV_POWER5	0x003A
-#define PV_POWER5p	0x003B
-#define PV_970FX	0x003C
-#define PV_630		0x0040
-#define PV_630p	0x0041
-#define PV_970MP	0x0044
-#define PV_970GX	0x0045
-#define PV_BE		0x0070
-#define PV_PA6T		0x0090
-
-/* Macros for setting and retrieving special purpose registers */
-#ifndef __ASSEMBLY__
-#define mfmsr()		({unsigned long rval; \
-			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
-#ifdef CONFIG_PPC64
-#define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
-				     : : "r" (v))
-#define mtmsrd(v)	__mtmsrd((v), 0)
-#define mtmsr(v)	mtmsrd(v)
-#else
-#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v))
-#endif
-
-#define mfspr(rn)	({unsigned long rval; \
-			asm volatile("mfspr %0," __stringify(rn) \
-				: "=r" (rval)); rval;})
-#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
-
-#ifdef __powerpc64__
-#ifdef CONFIG_PPC_CELL
-#define mftb()		({unsigned long rval;				\
-			asm volatile(					\
-				"90:	mftb %0;\n"			\
-				"97:	cmpwi %0,0;\n"			\
-				"	beq- 90b;\n"			\
-				"99:\n"					\
-				".section __ftr_fixup,\"a\"\n"		\
-				".align 3\n"				\
-				"98:\n"					\
-				"	.llong %1\n"			\
-				"	.llong %1\n"			\
-				"	.llong 97b-98b\n"		\
-				"	.llong 99b-98b\n"		\
-				"	.llong 0\n"			\
-				"	.llong 0\n"			\
-				".previous"				\
-			: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
-#else
-#define mftb()		({unsigned long rval;	\
-			asm volatile("mftb %0" : "=r" (rval)); rval;})
-#endif /* !CONFIG_PPC_CELL */
-
-#else /* __powerpc64__ */
-
-#define mftbl()		({unsigned long rval;	\
-			asm volatile("mftbl %0" : "=r" (rval)); rval;})
-#define mftbu()		({unsigned long rval;	\
-			asm volatile("mftbu %0" : "=r" (rval)); rval;})
-#endif /* !__powerpc64__ */
-
-#define mttbl(v)	asm volatile("mttbl %0":: "r"(v))
-#define mttbu(v)	asm volatile("mttbu %0":: "r"(v))
-
-#ifdef CONFIG_PPC32
-#define mfsrin(v)	({unsigned int rval; \
-			asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
-					rval;})
-#endif
-
-#define proc_trap()	asm volatile("trap")
-
-#ifdef CONFIG_PPC64
-
-extern void ppc64_runlatch_on(void);
-extern void ppc64_runlatch_off(void);
-
-extern unsigned long scom970_read(unsigned int address);
-extern void scom970_write(unsigned int address, unsigned long value);
-
-#else
-#define ppc64_runlatch_on()
-#define ppc64_runlatch_off()
-
-#endif /* CONFIG_PPC64 */
-
-#define __get_SP()	({unsigned long sp; \
-			asm volatile("mr %0,1": "=r" (sp)); sp;})
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_REG_H */
diff --git a/include/asm-powerpc/reg_8xx.h b/include/asm-powerpc/reg_8xx.h
deleted file mode 100644
index e8ea346b21d3..000000000000
--- a/include/asm-powerpc/reg_8xx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Contains register definitions common to PowerPC 8xx CPUs.  Notice
- */
-#ifndef _ASM_POWERPC_REG_8xx_H
-#define _ASM_POWERPC_REG_8xx_H
-
-/* Cache control on the MPC8xx is provided through some additional
- * special purpose registers.
- */
-#define SPRN_IC_CST	560	/* Instruction cache control/status */
-#define SPRN_IC_ADR	561	/* Address needed for some commands */
-#define SPRN_IC_DAT	562	/* Read-only data register */
-#define SPRN_DC_CST	568	/* Data cache control/status */
-#define SPRN_DC_ADR	569	/* Address needed for some commands */
-#define SPRN_DC_DAT	570	/* Read-only data register */
-
-/* Commands.  Only the first few are available to the instruction cache.
-*/
-#define	IDC_ENABLE	0x02000000	/* Cache enable */
-#define IDC_DISABLE	0x04000000	/* Cache disable */
-#define IDC_LDLCK	0x06000000	/* Load and lock */
-#define IDC_UNLINE	0x08000000	/* Unlock line */
-#define IDC_UNALL	0x0a000000	/* Unlock all */
-#define IDC_INVALL	0x0c000000	/* Invalidate all */
-
-#define DC_FLINE	0x0e000000	/* Flush data cache line */
-#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
-#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
-#define DC_SLES		0x05000000	/* Set little endian swap mode */
-#define DC_CLES		0x07000000	/* Clear little endian swap mode */
-
-/* Status.
-*/
-#define IDC_ENABLED	0x80000000	/* Cache is enabled */
-#define IDC_CERR1	0x00200000	/* Cache error 1 */
-#define IDC_CERR2	0x00100000	/* Cache error 2 */
-#define IDC_CERR3	0x00080000	/* Cache error 3 */
-
-#define DC_DFWT		0x40000000	/* Data cache is forced write through */
-#define DC_LES		0x20000000	/* Caches are little endian mode */
-
-#endif /* _ASM_POWERPC_REG_8xx_H */
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
deleted file mode 100644
index be980f4ee495..000000000000
--- a/include/asm-powerpc/reg_booke.h
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Contains register definitions common to the Book E PowerPC
- * specification.  Notice that while the IBM-40x series of CPUs
- * are not true Book E PowerPCs, they borrowed a number of features
- * before Book E was finalized, and are included here as well.  Unfortunatly,
- * they sometimes used different locations than true Book E CPUs did.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_REG_BOOKE_H__
-#define __ASM_POWERPC_REG_BOOKE_H__
-
-/* Machine State Register (MSR) Fields */
-#define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */
-#define MSR_SPE		(1<<25)	/* Enable SPE */
-#define MSR_DWE		(1<<10)	/* Debug Wait Enable */
-#define MSR_UBLE	(1<<10)	/* BTB lock enable (e500) */
-#define MSR_IS		MSR_IR	/* Instruction Space */
-#define MSR_DS		MSR_DR	/* Data Space */
-#define MSR_PMM		(1<<2)	/* Performance monitor mark bit */
-
-/* Default MSR for kernel mode. */
-#if defined (CONFIG_40x)
-#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#elif defined(CONFIG_BOOKE)
-#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_CE)
-#endif
-
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_DECAR	0x036	/* Decrementer Auto Reload Register */
-#define SPRN_IVPR	0x03F	/* Interrupt Vector Prefix Register */
-#define SPRN_USPRG0	0x100	/* User Special Purpose Register General 0 */
-#define SPRN_SPRG4R	0x104	/* Special Purpose Register General 4 Read */
-#define SPRN_SPRG5R	0x105	/* Special Purpose Register General 5 Read */
-#define SPRN_SPRG6R	0x106	/* Special Purpose Register General 6 Read */
-#define SPRN_SPRG7R	0x107	/* Special Purpose Register General 7 Read */
-#define SPRN_SPRG4W	0x114	/* Special Purpose Register General 4 Write */
-#define SPRN_SPRG5W	0x115	/* Special Purpose Register General 5 Write */
-#define SPRN_SPRG6W	0x116	/* Special Purpose Register General 6 Write */
-#define SPRN_SPRG7W	0x117	/* Special Purpose Register General 7 Write */
-#define SPRN_DBCR2	0x136	/* Debug Control Register 2 */
-#define SPRN_IAC3	0x13A	/* Instruction Address Compare 3 */
-#define SPRN_IAC4	0x13B	/* Instruction Address Compare 4 */
-#define SPRN_DVC1	0x13E	/* Data Value Compare Register 1 */
-#define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
-#define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
-#define SPRN_IVOR1	0x191	/* Interrupt Vector Offset Register 1 */
-#define SPRN_IVOR2	0x192	/* Interrupt Vector Offset Register 2 */
-#define SPRN_IVOR3	0x193	/* Interrupt Vector Offset Register 3 */
-#define SPRN_IVOR4	0x194	/* Interrupt Vector Offset Register 4 */
-#define SPRN_IVOR5	0x195	/* Interrupt Vector Offset Register 5 */
-#define SPRN_IVOR6	0x196	/* Interrupt Vector Offset Register 6 */
-#define SPRN_IVOR7	0x197	/* Interrupt Vector Offset Register 7 */
-#define SPRN_IVOR8	0x198	/* Interrupt Vector Offset Register 8 */
-#define SPRN_IVOR9	0x199	/* Interrupt Vector Offset Register 9 */
-#define SPRN_IVOR10	0x19A	/* Interrupt Vector Offset Register 10 */
-#define SPRN_IVOR11	0x19B	/* Interrupt Vector Offset Register 11 */
-#define SPRN_IVOR12	0x19C	/* Interrupt Vector Offset Register 12 */
-#define SPRN_IVOR13	0x19D	/* Interrupt Vector Offset Register 13 */
-#define SPRN_IVOR14	0x19E	/* Interrupt Vector Offset Register 14 */
-#define SPRN_IVOR15	0x19F	/* Interrupt Vector Offset Register 15 */
-#define SPRN_SPEFSCR	0x200	/* SPE & Embedded FP Status & Control */
-#define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
-#define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
-#define SPRN_L1CFG0	0x203	/* L1 Cache Configure Register 0 */
-#define SPRN_L1CFG1	0x204	/* L1 Cache Configure Register 1 */
-#define SPRN_ATB	0x20E	/* Alternate Time Base */
-#define SPRN_ATBL	0x20E	/* Alternate Time Base Lower */
-#define SPRN_ATBU	0x20F	/* Alternate Time Base Upper */
-#define SPRN_IVOR32	0x210	/* Interrupt Vector Offset Register 32 */
-#define SPRN_IVOR33	0x211	/* Interrupt Vector Offset Register 33 */
-#define SPRN_IVOR34	0x212	/* Interrupt Vector Offset Register 34 */
-#define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
-#define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
-#define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
-#define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
-#define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
-#define SPRN_MCSR	0x23C	/* Machine Check Status Register */
-#define SPRN_MCAR	0x23D	/* Machine Check Address Register */
-#define SPRN_DSRR0	0x23E	/* Debug Save and Restore Register 0 */
-#define SPRN_DSRR1	0x23F	/* Debug Save and Restore Register 1 */
-#define SPRN_SPRG8	0x25C	/* Special Purpose Register General 8 */
-#define SPRN_SPRG9	0x25D	/* Special Purpose Register General 9 */
-#define SPRN_L1CSR2	0x25E	/* L1 Cache Control and Status Register 2 */
-#define SPRN_MAS0	0x270	/* MMU Assist Register 0 */
-#define SPRN_MAS1	0x271	/* MMU Assist Register 1 */
-#define SPRN_MAS2	0x272	/* MMU Assist Register 2 */
-#define SPRN_MAS3	0x273	/* MMU Assist Register 3 */
-#define SPRN_MAS4	0x274	/* MMU Assist Register 4 */
-#define SPRN_MAS5	0x275	/* MMU Assist Register 5 */
-#define SPRN_MAS6	0x276	/* MMU Assist Register 6 */
-#define SPRN_PID1	0x279	/* Process ID Register 1 */
-#define SPRN_PID2	0x27A	/* Process ID Register 2 */
-#define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
-#define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
-#define SPRN_EPR	0x2BE	/* External Proxy Register */
-#define SPRN_CCR1	0x378	/* Core Configuration Register 1 */
-#define SPRN_ZPR	0x3B0	/* Zone Protection Register (40x) */
-#define SPRN_MAS7	0x3B0	/* MMU Assist Register 7 */
-#define SPRN_MMUCR	0x3B2	/* MMU Control Register */
-#define SPRN_CCR0	0x3B3	/* Core Configuration Register 0 */
-#define SPRN_EPLC	0x3B3	/* External Process ID Load Context */
-#define SPRN_EPSC	0x3B4	/* External Process ID Store Context */
-#define SPRN_SGR	0x3B9	/* Storage Guarded Register */
-#define SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
-#define SPRN_SLER	0x3BB	/* Little-endian real mode */
-#define SPRN_SU0R	0x3BC	/* "User 0" real mode (40x) */
-#define SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
-#define SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
-#define SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
-#define SPRN_L1CSR0	0x3F2	/* L1 Cache Control and Status Register 0 */
-#define SPRN_L1CSR1	0x3F3	/* L1 Cache Control and Status Register 1 */
-#define SPRN_PIT	0x3DB	/* Programmable Interval Timer */
-#define SPRN_BUCSR	0x3F5	/* Branch Unit Control and Status */
-#define SPRN_L2CSR0	0x3F9	/* L2 Data Cache Control and Status Register 0 */
-#define SPRN_L2CSR1	0x3FA	/* L2 Data Cache Control and Status Register 1 */
-#define SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
-#define SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
-#define SPRN_SVR	0x3FF	/* System Version Register */
-
-/*
- * SPRs which have conflicting definitions on true Book E versus classic,
- * or IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define SPRN_PID	0x030	/* Process ID */
-#define SPRN_PID0	SPRN_PID/* Process ID Register 0 */
-#define SPRN_CSRR0	0x03A	/* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1	0x03B	/* Critical Save and Restore Register 1 */
-#define SPRN_DEAR	0x03D	/* Data Error Address Register */
-#define SPRN_ESR	0x03E	/* Exception Syndrome Register */
-#define SPRN_PIR	0x11E	/* Processor Identification Register */
-#define SPRN_DBSR	0x130	/* Debug Status Register */
-#define SPRN_DBCR0	0x134	/* Debug Control Register 0 */
-#define SPRN_DBCR1	0x135	/* Debug Control Register 1 */
-#define SPRN_IAC1	0x138	/* Instruction Address Compare 1 */
-#define SPRN_IAC2	0x139	/* Instruction Address Compare 2 */
-#define SPRN_DAC1	0x13C	/* Data Address Compare 1 */
-#define SPRN_DAC2	0x13D	/* Data Address Compare 2 */
-#define SPRN_TSR	0x150	/* Timer Status Register */
-#define SPRN_TCR	0x154	/* Timer Control Register */
-#endif /* Book E */
-#ifdef CONFIG_40x
-#define SPRN_PID	0x3B1	/* Process ID */
-#define SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */		
-#define SPRN_ESR	0x3D4	/* Exception Syndrome Register */
-#define SPRN_DEAR	0x3D5	/* Data Error Address Register */
-#define SPRN_TSR	0x3D8	/* Timer Status Register */
-#define SPRN_TCR	0x3DA	/* Timer Control Register */
-#define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
-#define SPRN_SRR3	0x3DF	/* Save/Restore Register 3 */
-#define SPRN_DBSR	0x3F0	/* Debug Status Register */		
-#define SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
-#define SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
-#define SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
-#define SPRN_CSRR0	SPRN_SRR2 /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1	SPRN_SRR3 /* Critical Save and Restore Register 1 */
-#endif
-
-/* Bit definitions for CCR1. */
-#define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
-#define	CCR1_TCS	0x00000080 /* Timer Clock Select */
-
-/* Bit definitions for the MCSR. */
-#define MCSR_MCS	0x80000000 /* Machine Check Summary */
-#define MCSR_IB		0x40000000 /* Instruction PLB Error */
-#define MCSR_DRB	0x20000000 /* Data Read PLB Error */
-#define MCSR_DWB	0x10000000 /* Data Write PLB Error */
-#define MCSR_TLBP	0x08000000 /* TLB Parity Error */
-#define MCSR_ICP	0x04000000 /* I-Cache Parity Error */
-#define MCSR_DCSP	0x02000000 /* D-Cache Search Parity Error */
-#define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
-#define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
-
-#ifdef CONFIG_E500
-#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
-#define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
-#define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
-#define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
-#define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
-#define MCSR_BUS_RAERR 	0x00000040UL /* Read Address Error */
-#define MCSR_BUS_WAERR 	0x00000020UL /* Write Address Error */
-#define MCSR_BUS_IBERR 	0x00000010UL /* Instruction Data Error */
-#define MCSR_BUS_RBERR 	0x00000008UL /* Read Data Bus Error */
-#define MCSR_BUS_WBERR 	0x00000004UL /* Write Data Bus Error */
-#define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
-#define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
-
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
-			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
-			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
-			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
-#endif
-#ifdef CONFIG_E200
-#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
-#define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
-#define MCSR_CPERR 	0x10000000UL /* Cache Parity Error */
-#define MCSR_EXCP_ERR 	0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
-					fetch for an exception handler */
-#define MCSR_BUS_IRERR 	0x00000010UL /* Read Bus Error on instruction fetch*/
-#define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
-#define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
-					store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
-			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
-			MCSR_BUS_WRERR)
-#endif
-
-/* Bit definitions for the DBSR. */
-/*
- * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define DBSR_IC		0x08000000	/* Instruction Completion */
-#define DBSR_BT		0x04000000	/* Branch Taken */
-#define DBSR_IRPT	0x02000000	/* Exception Debug Event */
-#define DBSR_TIE	0x01000000	/* Trap Instruction Event */
-#define DBSR_IAC1	0x00800000	/* Instr Address Compare 1 Event */
-#define DBSR_IAC2	0x00400000	/* Instr Address Compare 2 Event */
-#define DBSR_IAC3	0x00200000	/* Instr Address Compare 3 Event */
-#define DBSR_IAC4	0x00100000	/* Instr Address Compare 4 Event */
-#define DBSR_DAC1R	0x00080000	/* Data Addr Compare 1 Read Event */
-#define DBSR_DAC1W	0x00040000	/* Data Addr Compare 1 Write Event */
-#define DBSR_DAC2R	0x00020000	/* Data Addr Compare 2 Read Event */
-#define DBSR_DAC2W	0x00010000	/* Data Addr Compare 2 Write Event */
-#define DBSR_RET	0x00008000	/* Return Debug Event */
-#define DBSR_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
-#define DBSR_CRET	0x00000020	/* Critical Return Debug Event */
-#endif
-#ifdef CONFIG_40x
-#define DBSR_IC		0x80000000	/* Instruction Completion */
-#define DBSR_BT		0x40000000	/* Branch taken */
-#define DBSR_IRPT	0x20000000	/* Exception Debug Event */
-#define DBSR_TIE	0x10000000	/* Trap Instruction debug Event */
-#define DBSR_IAC1	0x04000000	/* Instruction Address Compare 1 Event */
-#define DBSR_IAC2	0x02000000	/* Instruction Address Compare 2 Event */
-#define DBSR_IAC3	0x00080000	/* Instruction Address Compare 3 Event */
-#define DBSR_IAC4	0x00040000	/* Instruction Address Compare 4 Event */
-#define DBSR_DAC1R	0x01000000	/* Data Address Compare 1 Read Event */
-#define DBSR_DAC1W	0x00800000	/* Data Address Compare 1 Write Event */
-#define DBSR_DAC2R	0x00400000	/* Data Address Compare 2 Read Event */
-#define DBSR_DAC2W	0x00200000	/* Data Address Compare 2 Write Event */
-#endif
-
-/* Bit definitions related to the ESR. */
-#define ESR_MCI		0x80000000	/* Machine Check - Instruction */
-#define ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
-#define ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
-#define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
-#define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
-#define ESR_PIL		0x08000000	/* Program Exception - Illegal */
-#define ESR_PPR		0x04000000	/* Program Exception - Privileged */
-#define ESR_PTR		0x02000000	/* Program Exception - Trap */
-#define ESR_FP		0x01000000	/* Floating Point Operation */
-#define ESR_DST		0x00800000	/* Storage Exception - Data miss */
-#define ESR_DIZ		0x00400000	/* Storage Exception - Zone fault */
-#define ESR_ST		0x00800000	/* Store Operation */
-#define ESR_DLK		0x00200000	/* Data Cache Locking */
-#define ESR_ILK		0x00100000	/* Instr. Cache Locking */
-#define ESR_PUO		0x00040000	/* Unimplemented Operation exception */
-#define ESR_BO		0x00020000	/* Byte Ordering */
-
-/* Bit definitions related to the DBCR0. */
-#if defined(CONFIG_40x)
-#define DBCR0_EDM	0x80000000	/* External Debug Mode */
-#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
-#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
-#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
-#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
-#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
-#define DBCR0_RST_NONE	0x00000000	/* No Reset */
-#define DBCR0_IC	0x08000000	/* Instruction Completion */
-#define DBCR0_ICMP	DBCR0_IC
-#define DBCR0_BT	0x04000000	/* Branch Taken */
-#define DBCR0_BRT	DBCR0_BT
-#define DBCR0_EDE	0x02000000	/* Exception Debug Event */
-#define DBCR0_IRPT	DBCR0_EDE
-#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
-#define DBCR0_IA1	0x00800000	/* Instr Addr compare 1 enable */
-#define DBCR0_IAC1	DBCR0_IA1
-#define DBCR0_IA2	0x00400000	/* Instr Addr compare 2 enable */
-#define DBCR0_IAC2	DBCR0_IA2
-#define DBCR0_IA12	0x00200000	/* Instr Addr 1-2 range enable */
-#define DBCR0_IA12X	0x00100000	/* Instr Addr 1-2 range eXclusive */
-#define DBCR0_IA3	0x00080000	/* Instr Addr compare 3 enable */
-#define DBCR0_IAC3	DBCR0_IA3
-#define DBCR0_IA4	0x00040000	/* Instr Addr compare 4 enable */
-#define DBCR0_IAC4	DBCR0_IA4
-#define DBCR0_IA34	0x00020000	/* Instr Addr 3-4 range Enable */
-#define DBCR0_IA34X	0x00010000	/* Instr Addr 3-4 range eXclusive */
-#define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
-#define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
-#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
-#elif defined(CONFIG_BOOKE)
-#define DBCR0_EDM	0x80000000	/* External Debug Mode */
-#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
-#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
-/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
-#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
-#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
-#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
-#define DBCR0_RST_NONE	0x00000000	/* No Reset */
-#define DBCR0_ICMP	0x08000000	/* Instruction Completion */
-#define DBCR0_IC	DBCR0_ICMP
-#define DBCR0_BRT	0x04000000	/* Branch Taken */
-#define DBCR0_BT	DBCR0_BRT
-#define DBCR0_IRPT	0x02000000	/* Exception Debug Event */
-#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
-#define DBCR0_TIE	DBCR0_TDE
-#define DBCR0_IAC1	0x00800000	/* Instr Addr compare 1 enable */
-#define DBCR0_IAC2	0x00400000	/* Instr Addr compare 2 enable */
-#define DBCR0_IAC3	0x00200000	/* Instr Addr compare 3 enable */
-#define DBCR0_IAC4	0x00100000	/* Instr Addr compare 4 enable */
-#define DBCR0_DAC1R	0x00080000	/* DAC 1 Read enable */
-#define DBCR0_DAC1W	0x00040000	/* DAC 1 Write enable */
-#define DBCR0_DAC2R	0x00020000	/* DAC 2 Read enable */
-#define DBCR0_DAC2W	0x00010000	/* DAC 2 Write enable */
-#define DBCR0_RET	0x00008000	/* Return Debug Event */
-#define DBCR0_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
-#define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
-#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
-
-/* Bit definitions related to the DBCR1. */
-#define DBCR1_IAC12M	0x00800000	/* Instr Addr 1-2 range enable */
-#define DBCR1_IAC12MX	0x00C00000	/* Instr Addr 1-2 range eXclusive */
-#define DBCR1_IAC12AT	0x00010000	/* Instr Addr 1-2 range Toggle */
-#define DBCR1_IAC34M	0x00000080	/* Instr Addr 3-4 range enable */
-#define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
-#define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
-
-/* Bit definitions related to the DBCR2. */
-#define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
-#define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
-#define DBCR2_DAC12A	0x00200000	/* DAC 1-2 Asynchronous */
-#endif
-
-/* Bit definitions related to the TCR. */
-#define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */
-#define TCR_WP_MASK	TCR_WP(3)
-#define WP_2_17		0		/* 2^17 clocks */
-#define WP_2_21		1		/* 2^21 clocks */
-#define WP_2_25		2		/* 2^25 clocks */
-#define WP_2_29		3		/* 2^29 clocks */
-#define TCR_WRC(x)	(((x)&0x3)<<28)	/* WDT Reset Control */
-#define TCR_WRC_MASK	TCR_WRC(3)
-#define WRC_NONE	0		/* No reset will occur */
-#define WRC_CORE	1		/* Core reset will occur */
-#define WRC_CHIP	2		/* Chip reset will occur */
-#define WRC_SYSTEM	3		/* System reset will occur */
-#define TCR_WIE		0x08000000	/* WDT Interrupt Enable */
-#define TCR_PIE		0x04000000	/* PIT Interrupt Enable */
-#define TCR_DIE		TCR_PIE		/* DEC Interrupt Enable */
-#define TCR_FP(x)	(((x)&0x3)<<24)	/* FIT Period */
-#define TCR_FP_MASK	TCR_FP(3)
-#define FP_2_9		0		/* 2^9 clocks */
-#define FP_2_13		1		/* 2^13 clocks */
-#define FP_2_17		2		/* 2^17 clocks */
-#define FP_2_21		3		/* 2^21 clocks */
-#define TCR_FIE		0x00800000	/* FIT Interrupt Enable */
-#define TCR_ARE		0x00400000	/* Auto Reload Enable */
-
-/* Bit definitions for the TSR. */
-#define TSR_ENW		0x80000000	/* Enable Next Watchdog */
-#define TSR_WIS		0x40000000	/* WDT Interrupt Status */
-#define TSR_WRS(x)	(((x)&0x3)<<28)	/* WDT Reset Status */
-#define WRS_NONE	0		/* No WDT reset occurred */
-#define WRS_CORE	1		/* WDT forced core reset */
-#define WRS_CHIP	2		/* WDT forced chip reset */
-#define WRS_SYSTEM	3		/* WDT forced system reset */
-#define TSR_PIS		0x08000000	/* PIT Interrupt Status */
-#define TSR_DIS		TSR_PIS		/* DEC Interrupt Status */
-#define TSR_FIS		0x04000000	/* FIT Interrupt Status */
-
-/* Bit definitions for the DCCR. */
-#define DCCR_NOCACHE	0		/* Noncacheable */
-#define DCCR_CACHE	1		/* Cacheable */
-
-/* Bit definitions for DCWR. */
-#define DCWR_COPY	0		/* Copy-back */
-#define DCWR_WRITE	1		/* Write-through */
-
-/* Bit definitions for ICCR. */
-#define ICCR_NOCACHE	0		/* Noncacheable */
-#define ICCR_CACHE	1		/* Cacheable */
-
-/* Bit definitions for L1CSR0. */
-#define L1CSR0_CLFC	0x00000100	/* Cache Lock Bits Flash Clear */
-#define L1CSR0_DCFI	0x00000002	/* Data Cache Flash Invalidate */
-#define L1CSR0_CFI	0x00000002	/* Cache Flash Invalidate */
-#define L1CSR0_DCE	0x00000001	/* Data Cache Enable */
-
-/* Bit definitions for L1CSR1. */
-#define L1CSR1_ICLFR	0x00000100	/* Instr Cache Lock Bits Flash Reset */
-#define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
-#define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
-
-/* Bit definitions for L2CSR0. */
-#define L2CSR0_L2E	0x80000000	/* L2 Cache Enable */
-#define L2CSR0_L2PE	0x40000000	/* L2 Cache Parity/ECC Enable */
-#define L2CSR0_L2WP	0x1c000000	/* L2 I/D Way Partioning */
-#define L2CSR0_L2CM	0x03000000	/* L2 Cache Coherency Mode */
-#define L2CSR0_L2FI	0x00200000	/* L2 Cache Flash Invalidate */
-#define L2CSR0_L2IO	0x00100000	/* L2 Cache Instruction Only */
-#define L2CSR0_L2DO	0x00010000	/* L2 Cache Data Only */
-#define L2CSR0_L2REP	0x00003000	/* L2 Line Replacement Algo */
-#define L2CSR0_L2FL	0x00000800	/* L2 Cache Flush */
-#define L2CSR0_L2LFC	0x00000400	/* L2 Cache Lock Flash Clear */
-#define L2CSR0_L2LOA	0x00000080	/* L2 Cache Lock Overflow Allocate */
-#define L2CSR0_L2LO	0x00000020	/* L2 Cache Lock Overflow */
-
-/* Bit definitions for SGR. */
-#define SGR_NORMAL	0		/* Speculative fetching allowed. */
-#define SGR_GUARDED	1		/* Speculative fetching disallowed. */
-
-/* Bit definitions for SPEFSCR. */
-#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
-#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
-#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
-#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
-#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
-#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
-#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
-#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
-#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
-#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
-#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
-#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
-#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
-#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
-#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
-#define SPEFSCR_OV	0x00004000	/* Integer overflow */
-#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
-#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
-#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
-#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
-#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
-#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
-#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
-#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
-#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
-#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
-#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
-#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
-
-/*
- * The IBM-403 is an even more odd special case, as it is much
- * older than the IBM-405 series.  We put these down here incase someone
- * wishes to support these machines again.
- */
-#ifdef CONFIG_403GCX
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_TBHU	0x3CC	/* Time Base High User-mode */
-#define SPRN_TBLU	0x3CD	/* Time Base Low User-mode */
-#define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
-#define SPRN_TBHI	0x3DC	/* Time Base High */
-#define SPRN_TBLO	0x3DD	/* Time Base Low */
-#define SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
-#define SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
-#define SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
-#define SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
-#define SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
-
-
-/* Bit definitions for the DBCR. */
-#define DBCR_EDM	DBCR0_EDM
-#define DBCR_IDM	DBCR0_IDM
-#define DBCR_RST(x)	(((x) & 0x3) << 28)
-#define DBCR_RST_NONE	0
-#define DBCR_RST_CORE	1
-#define DBCR_RST_CHIP	2
-#define DBCR_RST_SYSTEM	3
-#define DBCR_IC		DBCR0_IC	/* Instruction Completion Debug Evnt */
-#define DBCR_BT		DBCR0_BT	/* Branch Taken Debug Event */
-#define DBCR_EDE	DBCR0_EDE	/* Exception Debug Event */
-#define DBCR_TDE	DBCR0_TDE	/* TRAP Debug Event */
-#define DBCR_FER	0x00F80000	/* First Events Remaining Mask */
-#define DBCR_FT		0x00040000	/* Freeze Timers on Debug Event */
-#define DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
-#define DAC_BYTE	0
-#define DAC_HALF	1
-#define DAC_WORD	2
-#define DAC_QUAD	3
-#define DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
-#define DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
-#define DBCR_SED	0x00000020	/* Second Exception Debug Event */
-#define DBCR_STD	0x00000010	/* Second Trap Debug Event */
-#define DBCR_SIA	0x00000008	/* Second IAC Enable */
-#define DBCR_SDA	0x00000004	/* Second DAC Enable */
-#define DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
-#endif /* 403GCX */
-#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/reg_fsl_emb.h b/include/asm-powerpc/reg_fsl_emb.h
deleted file mode 100644
index 1e180a594589..000000000000
--- a/include/asm-powerpc/reg_fsl_emb.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Contains register definitions for the Freescale Embedded Performance
- * Monitor.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
-#define __ASM_POWERPC_REG_FSL_EMB_H__
-
-#ifndef __ASSEMBLY__
-/* Performance Monitor Registers */
-#define mfpmr(rn)	({unsigned int rval; \
-			asm volatile("mfpmr %0," __stringify(rn) \
-				     : "=r" (rval)); rval;})
-#define mtpmr(rn, v)	asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
-#endif /* __ASSEMBLY__ */
-
-/* Freescale Book E Performance Monitor APU Registers */
-#define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
-#define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
-#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
-#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
-#define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
-#define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
-#define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
-#define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
-
-#define PMLCA_FC	0x80000000	/* Freeze Counter */
-#define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
-#define PMLCA_FCU	0x20000000	/* Freeze in User */
-#define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
-#define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
-#define PMLCA_CE	0x04000000	/* Condition Enable */
-
-#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
-#define PMLCA_EVENT_SHIFT	16
-
-#define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
-#define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
-#define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
-#define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
-
-#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshhold Multiple Field */
-#define PMLCB_THRESHMUL_SHIFT	8
-
-#define PMLCB_THRESHOLD_MASK	0x003f	/* Threshold Field */
-#define PMLCB_THRESHOLD_SHIFT	0
-
-#define PMRN_PMGC0	0x190	/* PM Global Control 0 */
-
-#define PMGC0_FAC	0x80000000	/* Freeze all Counters */
-#define PMGC0_PMIE	0x40000000	/* Interrupt Enable */
-#define PMGC0_FCECE	0x20000000	/* Freeze countes on
-					   Enabled Condition or
-					   Event */
-
-#define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
-#define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
-#define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
-#define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
-#define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
-#define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
-#define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
-#define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
-#define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
-#define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
-
-
-#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/resource.h b/include/asm-powerpc/resource.h
deleted file mode 100644
index 04bc4db8921b..000000000000
--- a/include/asm-powerpc/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/resource.h>
diff --git a/include/asm-powerpc/rheap.h b/include/asm-powerpc/rheap.h
deleted file mode 100644
index 172381769cfc..000000000000
--- a/include/asm-powerpc/rheap.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-ppc/rheap.h
- *
- * Header file for the implementation of a remote heap.
- *
- * Author: Pantelis Antoniou <panto@intracom.gr>
- *
- * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_PPC_RHEAP_H__
-#define __ASM_PPC_RHEAP_H__
-
-#include <linux/list.h>
-
-typedef struct _rh_block {
-	struct list_head list;
-	unsigned long start;
-	int size;
-	const char *owner;
-} rh_block_t;
-
-typedef struct _rh_info {
-	unsigned int alignment;
-	int max_blocks;
-	int empty_slots;
-	rh_block_t *block;
-	struct list_head empty_list;
-	struct list_head free_list;
-	struct list_head taken_list;
-	unsigned int flags;
-} rh_info_t;
-
-#define RHIF_STATIC_INFO	0x1
-#define RHIF_STATIC_BLOCK	0x2
-
-typedef struct _rh_stats {
-	unsigned long start;
-	int size;
-	const char *owner;
-} rh_stats_t;
-
-#define RHGS_FREE	0
-#define RHGS_TAKEN	1
-
-/* Create a remote heap dynamically */
-extern rh_info_t *rh_create(unsigned int alignment);
-
-/* Destroy a remote heap, created by rh_create() */
-extern void rh_destroy(rh_info_t * info);
-
-/* Initialize in place a remote info block */
-extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
-		    rh_block_t * block);
-
-/* Attach a free region to manage */
-extern int rh_attach_region(rh_info_t * info, unsigned long start, int size);
-
-/* Detach a free region */
-extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size);
-
-/* Allocate the given size from the remote heap (with alignment) */
-extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment,
-		const char *owner);
-
-/* Allocate the given size from the remote heap */
-extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner);
-
-/* Allocate the given size from the given address */
-extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size,
-			    const char *owner);
-
-/* Free the allocated area */
-extern int rh_free(rh_info_t * info, unsigned long start);
-
-/* Get stats for debugging purposes */
-extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
-			rh_stats_t * stats);
-
-/* Simple dump of remote heap info */
-extern void rh_dump(rh_info_t * info);
-
-/* Set owner of taken block */
-extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner);
-
-#endif				/* __ASM_PPC_RHEAP_H__ */
diff --git a/include/asm-powerpc/rio.h b/include/asm-powerpc/rio.h
deleted file mode 100644
index 0018bf80cb25..000000000000
--- a/include/asm-powerpc/rio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * RapidIO architecture support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef ASM_PPC_RIO_H
-#define ASM_PPC_RIO_H
-
-extern void platform_rio_init(void);
-
-#endif				/* ASM_PPC_RIO_H */
diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h
deleted file mode 100644
index 8eaa7b28d9d0..000000000000
--- a/include/asm-powerpc/rtas.h
+++ /dev/null
@@ -1,247 +0,0 @@
-#ifndef _POWERPC_RTAS_H
-#define _POWERPC_RTAS_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <asm/page.h>
-
-/*
- * Definitions for talking to the RTAS on CHRP machines.
- *
- * Copyright (C) 2001 Peter Bergner
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define RTAS_UNKNOWN_SERVICE (-1)
-#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
-
-/* Buffer size for ppc_rtas system call. */
-#define RTAS_RMOBUF_MAX (64 * 1024)
-
-/* RTAS return status codes */
-#define RTAS_NOT_SUSPENDABLE	-9004
-#define RTAS_BUSY		-2    /* RTAS Busy */
-#define RTAS_EXTENDED_DELAY_MIN	9900
-#define RTAS_EXTENDED_DELAY_MAX	9905
-
-/*
- * In general to call RTAS use rtas_token("string") to lookup
- * an RTAS token for the given string (e.g. "event-scan").
- * To actually perform the call use
- *    ret = rtas_call(token, n_in, n_out, ...)
- * Where n_in is the number of input parameters and
- *       n_out is the number of output parameters
- *
- * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
- * will be returned as a token.  rtas_call() does look for this
- * token and error out gracefully so rtas_call(rtas_token("str"), ...)
- * may be safely used for one-shot calls to RTAS.
- *
- */
-
-typedef u32 rtas_arg_t;
-
-struct rtas_args {
-	u32 token;
-	u32 nargs;
-	u32 nret; 
-	rtas_arg_t args[16];
-	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
-};  
-
-struct rtas_t {
-	unsigned long entry;		/* physical address pointer */
-	unsigned long base;		/* physical address pointer */
-	unsigned long size;
-	spinlock_t lock;
-	struct rtas_args args;
-	struct device_node *dev;	/* virtual address pointer */
-};
-
-/* RTAS event classes */
-#define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
-#define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
-#define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
-#define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
-#define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000
-
-/* RTAS event severity */
-#define RTAS_SEVERITY_FATAL		0x5
-#define RTAS_SEVERITY_ERROR		0x4
-#define RTAS_SEVERITY_ERROR_SYNC	0x3
-#define RTAS_SEVERITY_WARNING		0x2
-#define RTAS_SEVERITY_EVENT		0x1
-#define RTAS_SEVERITY_NO_ERROR		0x0
-
-/* RTAS event disposition */
-#define RTAS_DISP_FULLY_RECOVERED	0x0
-#define RTAS_DISP_LIMITED_RECOVERY	0x1
-#define RTAS_DISP_NOT_RECOVERED		0x2
-
-/* RTAS event initiator */
-#define RTAS_INITIATOR_UNKNOWN		0x0
-#define RTAS_INITIATOR_CPU		0x1
-#define RTAS_INITIATOR_PCI		0x2
-#define RTAS_INITIATOR_ISA		0x3
-#define RTAS_INITIATOR_MEMORY		0x4
-#define RTAS_INITIATOR_POWERMGM		0x5
-
-/* RTAS event target */
-#define RTAS_TARGET_UNKNOWN		0x0
-#define RTAS_TARGET_CPU			0x1
-#define RTAS_TARGET_PCI			0x2
-#define RTAS_TARGET_ISA			0x3
-#define RTAS_TARGET_MEMORY		0x4
-#define RTAS_TARGET_POWERMGM		0x5
-
-/* RTAS event type */
-#define RTAS_TYPE_RETRY			0x01
-#define RTAS_TYPE_TCE_ERR		0x02
-#define RTAS_TYPE_INTERN_DEV_FAIL	0x03
-#define RTAS_TYPE_TIMEOUT		0x04
-#define RTAS_TYPE_DATA_PARITY		0x05
-#define RTAS_TYPE_ADDR_PARITY		0x06
-#define RTAS_TYPE_CACHE_PARITY		0x07
-#define RTAS_TYPE_ADDR_INVALID		0x08
-#define RTAS_TYPE_ECC_UNCORR		0x09
-#define RTAS_TYPE_ECC_CORR		0x0a
-#define RTAS_TYPE_EPOW			0x40
-#define RTAS_TYPE_PLATFORM		0xE0
-#define RTAS_TYPE_IO			0xE1
-#define RTAS_TYPE_INFO			0xE2
-#define RTAS_TYPE_DEALLOC		0xE3
-#define RTAS_TYPE_DUMP			0xE4
-/* I don't add PowerMGM events right now, this is a different topic */ 
-#define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
-#define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
-#define RTAS_TYPE_PMGM_LID_OPEN		0x62
-#define RTAS_TYPE_PMGM_LID_CLOSE	0x63
-#define RTAS_TYPE_PMGM_SLEEP_BTN	0x64
-#define RTAS_TYPE_PMGM_WAKE_BTN		0x65
-#define RTAS_TYPE_PMGM_BATTERY_WARN	0x66
-#define RTAS_TYPE_PMGM_BATTERY_CRIT	0x67
-#define RTAS_TYPE_PMGM_SWITCH_TO_BAT	0x68
-#define RTAS_TYPE_PMGM_SWITCH_TO_AC	0x69
-#define RTAS_TYPE_PMGM_KBD_OR_MOUSE	0x6a
-#define RTAS_TYPE_PMGM_ENCLOS_OPEN	0x6b
-#define RTAS_TYPE_PMGM_ENCLOS_CLOSED	0x6c
-#define RTAS_TYPE_PMGM_RING_INDICATE	0x6d
-#define RTAS_TYPE_PMGM_LAN_ATTENTION	0x6e
-#define RTAS_TYPE_PMGM_TIME_ALARM	0x6f
-#define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
-#define RTAS_TYPE_PMGM_SERVICE_PROC	0x71
-
-struct rtas_error_log {
-	unsigned long version:8;		/* Architectural version */
-	unsigned long severity:3;		/* Severity level of error */
-	unsigned long disposition:2;		/* Degree of recovery */
-	unsigned long extended:1;		/* extended log present? */
-	unsigned long /* reserved */ :2;	/* Reserved for future use */
-	unsigned long initiator:4;		/* Initiator of event */
-	unsigned long target:4;			/* Target of failed operation */
-	unsigned long type:8;			/* General event or error*/
-	unsigned long extended_log_length:32;	/* length in bytes */
-	unsigned char buffer[1];
-};
-
-/*
- * This can be set by the rtas_flash module so that it can get called
- * as the absolutely last thing before the kernel terminates.
- */
-extern void (*rtas_flash_term_hook)(int);
-
-extern struct rtas_t rtas;
-
-extern void enter_rtas(unsigned long);
-extern int rtas_token(const char *service);
-extern int rtas_service_present(const char *service);
-extern int rtas_call(int token, int, int, int *, ...);
-extern void rtas_restart(char *cmd);
-extern void rtas_power_off(void);
-extern void rtas_halt(void);
-extern void rtas_os_term(char *str);
-extern int rtas_get_sensor(int sensor, int index, int *state);
-extern int rtas_get_power_level(int powerdomain, int *level);
-extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
-extern int rtas_set_indicator(int indicator, int index, int new_value);
-extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
-extern void rtas_progress(char *s, unsigned short hex);
-extern void rtas_initialize(void);
-
-struct rtc_time;
-extern unsigned long rtas_get_boot_time(void);
-extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
-extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
-
-extern unsigned int rtas_busy_delay_time(int status);
-extern unsigned int rtas_busy_delay(int status);
-
-extern int early_init_dt_scan_rtas(unsigned long node,
-		const char *uname, int depth, void *data);
-
-extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
-
-/* Error types logged.  */
-#define ERR_FLAG_ALREADY_LOGGED	0x0
-#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
-#define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
-#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
-
-/* All the types and not flags */
-#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
-
-#define RTAS_DEBUG KERN_DEBUG "RTAS: "
- 
-#define RTAS_ERROR_LOG_MAX 2048
-
-/*
- * Return the firmware-specified size of the error log buffer
- *  for all rtas calls that require an error buffer argument.
- *  This includes 'check-exception' and 'rtas-last-error'.
- */
-extern int rtas_get_error_log_max(void);
-
-/* Event Scan Parameters */
-#define EVENT_SCAN_ALL_EVENTS	0xf0000000
-#define SURVEILLANCE_TOKEN	9000
-#define LOG_NUMBER		64		/* must be a power of two */
-#define LOG_NUMBER_MASK		(LOG_NUMBER-1)
-
-/* Some RTAS ops require a data buffer and that buffer must be < 4G.
- * Rather than having a memory allocator, just use this buffer
- * (get the lock first), make the RTAS call.  Copy the data instead
- * of holding the buffer for long.
- */
-
-#define RTAS_DATA_BUF_SIZE 4096
-extern spinlock_t rtas_data_buf_lock;
-extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
-
-/* RMO buffer reserved for user-space RTAS use */
-extern unsigned long rtas_rmo_buf;
-
-#define GLOBAL_INTERRUPT_QUEUE 9005
-
-/**
- * rtas_config_addr - Format a busno, devfn and reg for RTAS.
- * @busno: The bus number.
- * @devfn: The device and function number as encoded by PCI_DEVFN().
- * @reg: The register number.
- *
- * This function encodes the given busno, devfn and register number as
- * required for RTAS calls that take a "config_addr" parameter.
- * See PAPR requirement 7.3.4-1 for more info.
- */
-static inline u32 rtas_config_addr(int busno, int devfn, int reg)
-{
-	return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) |
-			(devfn << 8) | (reg & 0xff);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _POWERPC_RTAS_H */
diff --git a/include/asm-powerpc/rtc.h b/include/asm-powerpc/rtc.h
deleted file mode 100644
index f5802926b6c0..000000000000
--- a/include/asm-powerpc/rtc.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Real-time clock definitions and interfaces
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on:
- * include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- *
- * And the old drivers/macintosh/rtc.c which was heavily based on:
- * Linux/SPARC Real Time Clock Driver
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- *
- * With additional work by Paul Mackerras and Franz Sirl.
- */
-
-#ifndef __ASM_POWERPC_RTC_H__
-#define __ASM_POWERPC_RTC_H__
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/time.h>
-
-#define RTC_PIE 0x40		/* periodic interrupt enable */
-#define RTC_AIE 0x20		/* alarm interrupt enable */
-#define RTC_UIE 0x10		/* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100	/* battery bad */
-#define RTC_SQWE 0x08		/* enable square-wave output */
-#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
-	if (ppc_md.get_rtc_time)
-		ppc_md.get_rtc_time(time);
-	return RTC_24H;
-}
-
-/* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
-{
-	if (ppc_md.set_rtc_time)
-		return ppc_md.set_rtc_time(time);
-	return -EINVAL;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
-	struct rtc_time h;
-
-	get_rtc_time(&h);
-	return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
-	return -EINVAL;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_RTC_H__ */
diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h
deleted file mode 100644
index a6cc93b78b98..000000000000
--- a/include/asm-powerpc/rwsem.h
+++ /dev/null
@@ -1,173 +0,0 @@
-#ifndef _ASM_POWERPC_RWSEM_H
-#define _ASM_POWERPC_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#ifdef __KERNEL__
-
-/*
- * include/asm-powerpc/rwsem.h: R/W semaphores for PPC using the stuff
- * in lib/rwsem.c.  Adapted largely from include/asm-i386/rwsem.h
- * by Paul Mackerras <paulus@samba.org>.
- */
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-	/* XXX this should be able to be an atomic_t  -- paulus */
-	signed int		count;
-#define RWSEM_UNLOCKED_VALUE		0x00000000
-#define RWSEM_ACTIVE_BIAS		0x00000001
-#define RWSEM_ACTIVE_MASK		0x0000ffff
-#define RWSEM_WAITING_BIAS		(-0x00010000)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
-	  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name)		\
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-			 struct lock_class_key *key);
-
-#define init_rwsem(sem)					\
-	do {						\
-		static struct lock_class_key __key;	\
-							\
-		__init_rwsem((sem), #sem, &__key);	\
-	} while (0)
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
-	if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
-		rwsem_down_read_failed(sem);
-}
-
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	while ((tmp = sem->count) >= 0) {
-		if (tmp == cmpxchg(&sem->count, tmp,
-				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	int tmp;
-
-	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
-				(atomic_t *)(&sem->count));
-	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
-		rwsem_down_write_failed(sem);
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
-		      RWSEM_ACTIVE_WRITE_BIAS);
-	return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = atomic_dec_return((atomic_t *)(&sem->count));
-	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
-		rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
-	if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
-			      (atomic_t *)(&sem->count)) < 0))
-		rwsem_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
-	atomic_add(delta, (atomic_t *)(&sem->count));
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
-	if (tmp < 0)
-		rwsem_downgrade_wake(sem);
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
-	return atomic_add_return(delta, (atomic_t *)(&sem->count));
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/include/asm-powerpc/scatterlist.h b/include/asm-powerpc/scatterlist.h
deleted file mode 100644
index fcf7d55afe45..000000000000
--- a/include/asm-powerpc/scatterlist.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _ASM_POWERPC_SCATTERLIST_H
-#define _ASM_POWERPC_SCATTERLIST_H
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#include <asm/dma.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	unsigned int length;
-
-	/* For TCE support */
-	dma_addr_t dma_address;
-	u32 dma_length;
-};
-
-/*
- * These macros should be used after a dma_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef __powerpc64__
-#define sg_dma_len(sg)		((sg)->dma_length)
-#else
-#define sg_dma_len(sg)		((sg)->length)
-#endif
-
-#ifdef __powerpc64__
-#define ISA_DMA_THRESHOLD	(~0UL)
-#endif
-
-#define ARCH_HAS_SG_CHAIN
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/include/asm-powerpc/seccomp.h b/include/asm-powerpc/seccomp.h
deleted file mode 100644
index 853765eb1f65..000000000000
--- a/include/asm-powerpc/seccomp.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_SECCOMP_H
-#define _ASM_POWERPC_SECCOMP_H
-
-#ifdef __KERNEL__
-#include <linux/thread_info.h>
-#endif
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#define __NR_seccomp_read_32 __NR_read
-#define __NR_seccomp_write_32 __NR_write
-#define __NR_seccomp_exit_32 __NR_exit
-#define __NR_seccomp_sigreturn_32 __NR_sigreturn
-
-#endif	/* _ASM_POWERPC_SECCOMP_H */
diff --git a/include/asm-powerpc/sections.h b/include/asm-powerpc/sections.h
deleted file mode 100644
index 916018e425c4..000000000000
--- a/include/asm-powerpc/sections.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_POWERPC_SECTIONS_H
-#define _ASM_POWERPC_SECTIONS_H
-#ifdef __KERNEL__
-
-#include <asm-generic/sections.h>
-
-#ifdef __powerpc64__
-
-extern char _end[];
-
-static inline int in_kernel_text(unsigned long addr)
-{
-	if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end)
-		return 1;
-
-	return 0;
-}
-
-#endif
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_SECTIONS_H */
diff --git a/include/asm-powerpc/semaphore.h b/include/asm-powerpc/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-powerpc/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-powerpc/sembuf.h b/include/asm-powerpc/sembuf.h
deleted file mode 100644
index 99a41938ae3d..000000000000
--- a/include/asm-powerpc/sembuf.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _ASM_POWERPC_SEMBUF_H
-#define _ASM_POWERPC_SEMBUF_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * The semid64_ds structure for PPC architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
-#ifndef __powerpc64__
-	unsigned long	__unused1;
-#endif
-	__kernel_time_t	sem_otime;	/* last semop time */
-#ifndef __powerpc64__
-	unsigned long	__unused2;
-#endif
-	__kernel_time_t	sem_ctime;	/* last change time */
-	unsigned long	sem_nsems;	/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif	/* _ASM_POWERPC_SEMBUF_H */
diff --git a/include/asm-powerpc/serial.h b/include/asm-powerpc/serial.h
deleted file mode 100644
index 3e8589b43cb2..000000000000
--- a/include/asm-powerpc/serial.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_SERIAL_H
-#define _ASM_POWERPC_SERIAL_H
-
-/*
- * Serial ports are not listed here, because they are discovered
- * through the device tree.
- */
-
-/* Default baud base if not found in device-tree */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#ifdef CONFIG_PPC_UDBG_16550
-extern void find_legacy_serial_ports(void);
-#else
-#define find_legacy_serial_ports()	do { } while (0)
-#endif
-
-#endif /* _PPC64_SERIAL_H */
diff --git a/include/asm-powerpc/setjmp.h b/include/asm-powerpc/setjmp.h
deleted file mode 100644
index 279d03a1eec6..000000000000
--- a/include/asm-powerpc/setjmp.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright © 2008 Michael Neuling IBM Corporation
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- *
- */
-#ifndef _ASM_POWERPC_SETJMP_H
-#define _ASM_POWERPC_SETJMP_H
-
-#define JMP_BUF_LEN    23
-
-extern long setjmp(long *);
-extern void longjmp(long *, long);
-
-#endif /* _ASM_POWERPC_SETJMP_H */
diff --git a/include/asm-powerpc/setup.h b/include/asm-powerpc/setup.h
deleted file mode 100644
index 817fac0a0714..000000000000
--- a/include/asm-powerpc/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_POWERPC_SETUP_H
-#define _ASM_POWERPC_SETUP_H
-
-#define COMMAND_LINE_SIZE	512
-
-#endif	/* _ASM_POWERPC_SETUP_H */
diff --git a/include/asm-powerpc/shmbuf.h b/include/asm-powerpc/shmbuf.h
deleted file mode 100644
index 8efa39698b6c..000000000000
--- a/include/asm-powerpc/shmbuf.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _ASM_POWERPC_SHMBUF_H
-#define _ASM_POWERPC_SHMBUF_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * The shmid64_ds structure for PPC architecture.
- *
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-#ifndef __powerpc64__
-	unsigned long		__unused1;
-#endif
-	__kernel_time_t		shm_atime;	/* last attach time */
-#ifndef __powerpc64__
-	unsigned long		__unused2;
-#endif
-	__kernel_time_t		shm_dtime;	/* last detach time */
-#ifndef __powerpc64__
-	unsigned long		__unused3;
-#endif
-	__kernel_time_t		shm_ctime;	/* last change time */
-#ifndef __powerpc64__
-	unsigned long		__unused4;
-#endif
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused5;
-	unsigned long		__unused6;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif	/* _ASM_POWERPC_SHMBUF_H */
diff --git a/include/asm-powerpc/shmparam.h b/include/asm-powerpc/shmparam.h
deleted file mode 100644
index 5cda42a6d39e..000000000000
--- a/include/asm-powerpc/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_POWERPC_SHMPARAM_H
-#define _ASM_POWERPC_SHMPARAM_H
-
-#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
-
-#endif	/* _ASM_POWERPC_SHMPARAM_H */
diff --git a/include/asm-powerpc/sigcontext.h b/include/asm-powerpc/sigcontext.h
deleted file mode 100644
index 9c1f24fd5d11..000000000000
--- a/include/asm-powerpc/sigcontext.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _ASM_POWERPC_SIGCONTEXT_H
-#define _ASM_POWERPC_SIGCONTEXT_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#ifdef __powerpc64__
-#include <asm/elf.h>
-#endif
-
-struct sigcontext {
-	unsigned long	_unused[4];
-	int		signal;
-#ifdef __powerpc64__
-	int		_pad0;
-#endif
-	unsigned long	handler;
-	unsigned long	oldmask;
-	struct pt_regs	__user *regs;
-#ifdef __powerpc64__
-	elf_gregset_t	gp_regs;
-	elf_fpregset_t	fp_regs;
-/*
- * To maintain compatibility with current implementations the sigcontext is
- * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t)
- * followed by an unstructured (vmx_reserve) field of 69 doublewords.  This
- * allows the array of vector registers to be quadword aligned independent of
- * the alignment of the containing sigcontext or ucontext. It is the
- * responsibility of the code setting the sigcontext to set this pointer to
- * either NULL (if this processor does not support the VMX feature) or the
- * address of the first quadword within the allocated (vmx_reserve) area.
- *
- * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with
- * an array of 34 quadword entries (elf_vrregset_t).  The entries with
- * indexes 0-31 contain the corresponding vector registers.  The entry with
- * index 32 contains the vscr as the last word (offset 12) within the
- * quadword.  This allows the vscr to be stored as either a quadword (since
- * it must be copied via a vector register to/from storage) or as a word.
- * The entry with index 33 contains the vrsave as the first word (offset 0)
- * within the quadword.
- *
- * Part of the VSX data is stored here also by extending vmx_restore
- * by an additional 32 double words.  Architecturally the layout of
- * the VSR registers and how they overlap on top of the legacy FPR and
- * VR registers is shown below:
- *
- *                    VSR doubleword 0               VSR doubleword 1
- *           ----------------------------------------------------------------
- *   VSR[0]  |             FPR[0]            |                              |
- *           ----------------------------------------------------------------
- *   VSR[1]  |             FPR[1]            |                              |
- *           ----------------------------------------------------------------
- *           |              ...              |                              |
- *           |              ...              |                              |
- *           ----------------------------------------------------------------
- *   VSR[30] |             FPR[30]           |                              |
- *           ----------------------------------------------------------------
- *   VSR[31] |             FPR[31]           |                              |
- *           ----------------------------------------------------------------
- *   VSR[32] |                             VR[0]                            |
- *           ----------------------------------------------------------------
- *   VSR[33] |                             VR[1]                            |
- *           ----------------------------------------------------------------
- *           |                              ...                             |
- *           |                              ...                             |
- *           ----------------------------------------------------------------
- *   VSR[62] |                             VR[30]                           |
- *           ----------------------------------------------------------------
- *   VSR[63] |                             VR[31]                           |
- *           ----------------------------------------------------------------
- *
- * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63
- * is stored at the start of vmx_reserve.  vmx_reserve is extended for
- * backwards compatility to store VSR 0-31 doubleword 1 after the VMX
- * registers and vscr/vrsave.
- */
-	elf_vrreg_t	__user *v_regs;
-	long		vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
-#endif
-};
-
-#endif /* _ASM_POWERPC_SIGCONTEXT_H */
diff --git a/include/asm-powerpc/siginfo.h b/include/asm-powerpc/siginfo.h
deleted file mode 100644
index 12f1bce037be..000000000000
--- a/include/asm-powerpc/siginfo.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _ASM_POWERPC_SIGINFO_H
-#define _ASM_POWERPC_SIGINFO_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __powerpc64__
-#    define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
-#    define SI_PAD_SIZE32		((SI_MAX_SIZE/sizeof(int)) - 3)
-#endif
-
-#include <asm-generic/siginfo.h>
-
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
-#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
-#undef NSIGTRAP
-#define NSIGTRAP	4
-
-#endif	/* _ASM_POWERPC_SIGINFO_H */
diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h
deleted file mode 100644
index a8c7babf4950..000000000000
--- a/include/asm-powerpc/signal.h
+++ /dev/null
@@ -1,151 +0,0 @@
-#ifndef _ASM_POWERPC_SIGNAL_H
-#define _ASM_POWERPC_SIGNAL_H
-
-#include <linux/types.h>
-
-#define _NSIG		64
-#ifdef __powerpc64__
-#define _NSIG_BPW	64
-#else
-#define _NSIG_BPW	32
-#endif
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001U
-#define SA_NOCLDWAIT	0x00000002U
-#define SA_SIGINFO	0x00000004U
-#define SA_ONSTACK	0x08000000U
-#define SA_RESTART	0x10000000U
-#define SA_NODEFER	0x40000000U
-#define SA_RESETHAND	0x80000000U
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000U
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-struct pt_regs;
-extern int do_signal(sigset_t *oldset, struct pt_regs *regs);
-extern int do_signal32(sigset_t *oldset, struct pt_regs *regs);
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif /* __KERNEL__ */
-
-#ifndef __powerpc64__
-/*
- * These are parameters to dbg_sigreturn syscall.  They enable or
- * disable certain debugging things that can be done from signal
- * handlers.  The dbg_sigreturn syscall *must* be called from a
- * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
- * array of struct sig_dbg_op, which has the debug operations to
- * perform before returning from the signal.
- */
-struct sig_dbg_op {
-	int dbg_type;
-	unsigned long dbg_value;
-};
-
-/* Enable or disable single-stepping.  The value sets the state. */
-#define SIG_DBG_SINGLE_STEPPING		1
-
-/* Enable or disable branch tracing.  The value sets the state. */
-#define SIG_DBG_BRANCH_TRACING		2
-#endif /* ! __powerpc64__ */
-
-#endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h
deleted file mode 100644
index 416d4c288cea..000000000000
--- a/include/asm-powerpc/smp.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* 
- * smp.h: PowerPC-specific SMP code.
- *
- * Original was a copy of sparc smp.h.  Now heavily modified
- * for PPC.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_SMP_H
-#define _ASM_POWERPC_SMP_H
-#ifdef __KERNEL__
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/kernel.h>
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#endif
-#include <asm/percpu.h>
-
-extern int boot_cpuid;
-
-extern void cpu_die(void);
-
-#ifdef CONFIG_SMP
-
-extern void smp_send_debugger_break(int cpu);
-extern void smp_message_recv(int);
-
-DECLARE_PER_CPU(unsigned int, pvr);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(cpumask_t map);
-int generic_cpu_disable(void);
-int generic_cpu_enable(unsigned int cpu);
-void generic_cpu_die(unsigned int cpu);
-void generic_mach_cpu_die(void);
-#endif
-
-#ifdef CONFIG_PPC64
-#define raw_smp_processor_id()	(local_paca->paca_index)
-#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
-#else
-/* 32-bit */
-extern int smp_hw_index[];
-
-#define raw_smp_processor_id()	(current_thread_info()->cpu)
-#define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
-#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
-#define set_hard_smp_processor_id(cpu, phys)\
-					(smp_hw_index[(cpu)] = (phys))
-#endif
-
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-
-/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
- *
- * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
- * in /proc/interrupts will be wrong!!! --Troy */
-#define PPC_MSG_CALL_FUNCTION   0
-#define PPC_MSG_RESCHEDULE      1
-#define PPC_MSG_CALL_FUNC_SINGLE	2
-#define PPC_MSG_DEBUGGER_BREAK  3
-
-void smp_init_iSeries(void);
-void smp_init_pSeries(void);
-void smp_init_cell(void);
-void smp_init_celleb(void);
-void smp_setup_cpu_maps(void);
-void smp_setup_cpu_sibling_map(void);
-
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-
-#else
-/* for UP */
-#define hard_smp_processor_id()		0
-#define smp_setup_cpu_maps()
-
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PPC64
-#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
-#define set_hard_smp_processor_id(CPU, VAL) \
-	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
-
-extern void smp_release_cpus(void);
-
-#else
-/* 32-bit */
-#ifndef CONFIG_SMP
-extern int boot_cpuid_phys;
-#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
-#define set_hard_smp_processor_id(cpu, phys)
-#endif
-#endif
-
-extern int smt_enabled_at_boot;
-
-extern int smp_mpic_probe(void);
-extern void smp_mpic_setup_cpu(int cpu);
-extern void smp_generic_kick_cpu(int nr);
-
-extern void smp_generic_give_timebase(void);
-extern void smp_generic_take_timebase(void);
-
-extern struct smp_ops_t *smp_ops;
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SMP_H) */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
deleted file mode 100644
index 7ae2753da565..000000000000
--- a/include/asm-powerpc/smu.h
+++ /dev/null
@@ -1,700 +0,0 @@
-#ifndef _SMU_H
-#define _SMU_H
-
-/*
- * Definitions for talking to the SMU chip in newer G5 PowerMacs
- */
-#ifdef __KERNEL__
-#include <linux/list.h>
-#endif
-#include <linux/types.h>
-
-/*
- * Known SMU commands
- *
- * Most of what is below comes from looking at the Open Firmware driver,
- * though this is still incomplete and could use better documentation here
- * or there...
- */
-
-
-/*
- * Partition info commands
- *
- * These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The length is always 2. First byte is the subcommand code
- * and second byte is the partition ID.
- *
- * The reply is 6 bytes:
- *
- *  - 0..1 : partition address
- *  - 2    : a byte containing the partition ID
- *  - 3    : length (maybe other bits are rest of header ?)
- *
- * The data must then be obtained with calls to another command:
- * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
- */
-#define SMU_CMD_PARTITION_COMMAND		0x3e
-#define   SMU_CMD_PARTITION_LATEST		0x01
-#define   SMU_CMD_PARTITION_BASE		0x02
-#define   SMU_CMD_PARTITION_UPDATE		0x03
-
-
-/*
- * Fan control
- *
- * This is a "mux" for fan control commands. The command seem to
- * act differently based on the number of arguments. With 1 byte
- * of argument, this seem to be queries for fans status, setpoint,
- * etc..., while with 0xe arguments, we will set the fans speeds.
- *
- * Queries (1 byte arg):
- * ---------------------
- *
- * arg=0x01: read RPM fans status
- * arg=0x02: read RPM fans setpoint
- * arg=0x11: read PWM fans status
- * arg=0x12: read PWM fans setpoint
- *
- * the "status" queries return the current speed while the "setpoint" ones
- * return the programmed/target speed. It _seems_ that the result is a bit
- * mask in the first byte of active/available fans, followed by 6 words (16
- * bits) containing the requested speed.
- *
- * Setpoint (14 bytes arg):
- * ------------------------
- *
- * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
- * mask of fans affected by the command. Followed by 6 words containing the
- * setpoint value for selected fans in the mask (or 0 if mask value is 0)
- */
-#define SMU_CMD_FAN_COMMAND			0x4a
-
-
-/*
- * Battery access
- *
- * Same command number as the PMU, could it be same syntax ?
- */
-#define SMU_CMD_BATTERY_COMMAND			0x6f
-#define   SMU_CMD_GET_BATTERY_INFO		0x00
-
-/*
- * Real time clock control
- *
- * This is a "mux", first data byte contains the "sub" command.
- * The "RTC" part of the SMU controls the date, time, powerup
- * timer, but also a PRAM
- *
- * Dates are in BCD format on 7 bytes:
- * [sec] [min] [hour] [weekday] [month day] [month] [year]
- * with month being 1 based and year minus 100
- */
-#define SMU_CMD_RTC_COMMAND			0x8e
-#define   SMU_CMD_RTC_SET_PWRUP_TIMER		0x00 /* i: 7 bytes date */
-#define   SMU_CMD_RTC_GET_PWRUP_TIMER		0x01 /* o: 7 bytes date */
-#define   SMU_CMD_RTC_STOP_PWRUP_TIMER		0x02
-#define   SMU_CMD_RTC_SET_PRAM_BYTE_ACC		0x20 /* i: 1 byte (address?) */
-#define   SMU_CMD_RTC_SET_PRAM_AUTOINC		0x21 /* i: 1 byte (data?) */
-#define   SMU_CMD_RTC_SET_PRAM_LO_BYTES 	0x22 /* i: 10 bytes */
-#define   SMU_CMD_RTC_SET_PRAM_HI_BYTES 	0x23 /* i: 10 bytes */
-#define   SMU_CMD_RTC_GET_PRAM_BYTE		0x28 /* i: 1 bytes (address?) */
-#define   SMU_CMD_RTC_GET_PRAM_LO_BYTES 	0x29 /* o: 10 bytes */
-#define   SMU_CMD_RTC_GET_PRAM_HI_BYTES 	0x2a /* o: 10 bytes */
-#define	  SMU_CMD_RTC_SET_DATETIME		0x80 /* i: 7 bytes date */
-#define   SMU_CMD_RTC_GET_DATETIME		0x81 /* o: 7 bytes date */
-
- /*
-  * i2c commands
-  *
-  * To issue an i2c command, first is to send a parameter block to the
-  * the SMU. This is a command of type 0x9a with 9 bytes of header
-  * eventually followed by data for a write:
-  *
-  * 0: bus number (from device-tree usually, SMU has lots of busses !)
-  * 1: transfer type/format (see below)
-  * 2: device address. For combined and combined4 type transfers, this
-  *    is the "write" version of the address (bit 0x01 cleared)
-  * 3: subaddress length (0..3)
-  * 4: subaddress byte 0 (or only byte for subaddress length 1)
-  * 5: subaddress byte 1
-  * 6: subaddress byte 2
-  * 7: combined address (device address for combined mode data phase)
-  * 8: data length
-  *
-  * The transfer types are the same good old Apple ones it seems,
-  * that is:
-  *   - 0x00: Simple transfer
-  *   - 0x01: Subaddress transfer (addr write + data tx, no restart)
-  *   - 0x02: Combined transfer (addr write + restart + data tx)
-  *
-  * This is then followed by actual data for a write.
-  *
-  * At this point, the OF driver seems to have a limitation on transfer
-  * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
-  * wether this is just an OF limit due to some temporary buffer size
-  * or if this is an SMU imposed limit. This driver has the same limitation
-  * for now as I use a 0x10 bytes temporary buffer as well
-  *
-  * Once that is completed, a response is expected from the SMU. This is
-  * obtained via a command of type 0x9a with a length of 1 byte containing
-  * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
-  * though I can't tell yet if this is actually necessary. Once this command
-  * is complete, at this point, all I can tell is what OF does. OF tests
-  * byte 0 of the reply:
-  *   - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
-  *   - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
-  *   - on write, < 0 -> failure (immediate exit)
-  *   - else, OF just exists (without error, weird)
-  *
-  * So on read, there is this wait-for-busy thing when getting a 0xfc or
-  * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
-  * doing the above again until either the retries expire or the result
-  * is no longer 0xfe or 0xfc
-  *
-  * The Darwin I2C driver is less subtle though. On any non-success status
-  * from the response command, it waits 5ms and tries again up to 20 times,
-  * it doesn't differenciate between fatal errors or "busy" status.
-  *
-  * This driver provides an asynchronous paramblock based i2c command
-  * interface to be used either directly by low level code or by a higher
-  * level driver interfacing to the linux i2c layer. The current
-  * implementation of this relies on working timers & timer interrupts
-  * though, so be careful of calling context for now. This may be "fixed"
-  * in the future by adding a polling facility.
-  */
-#define SMU_CMD_I2C_COMMAND			0x9a
-          /* transfer types */
-#define   SMU_I2C_TRANSFER_SIMPLE	0x00
-#define   SMU_I2C_TRANSFER_STDSUB	0x01
-#define   SMU_I2C_TRANSFER_COMBINED	0x02
-
-/*
- * Power supply control
- *
- * The "sub" command is an ASCII string in the data, the
- * data length is that of the string.
- *
- * The VSLEW command can be used to get or set the voltage slewing.
- *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
- *    reply at data offset 6, 7 and 8.
- *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
- *    used to set the voltage slewing point. The SMU replies with "DONE"
- * I yet have to figure out their exact meaning of those 3 bytes in
- * both cases. They seem to be:
- *  x = processor mask
- *  y = op. point index
- *  z = processor freq. step index
- * I haven't yet decyphered result codes
- *
- */
-#define SMU_CMD_POWER_COMMAND			0xaa
-#define   SMU_CMD_POWER_RESTART		       	"RESTART"
-#define   SMU_CMD_POWER_SHUTDOWN		"SHUTDOWN"
-#define   SMU_CMD_POWER_VOLTAGE_SLEW		"VSLEW"
-
-/*
- * Read ADC sensors
- *
- * This command takes one byte of parameter: the sensor ID (or "reg"
- * value in the device-tree) and returns a 16 bits value
- */
-#define SMU_CMD_READ_ADC			0xd8
-
-
-/* Misc commands
- *
- * This command seem to be a grab bag of various things
- *
- * Parameters:
- *   1: subcommand
- */
-#define SMU_CMD_MISC_df_COMMAND			0xdf
-
-/*
- * Sets "system ready" status
- *
- * I did not yet understand how it exactly works or what it does.
- *
- * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
- * the same codebase for all OF versions. On PowerBooks, this command would
- * enable the backlight. For the G5s, it only activates the front LED. However,
- * don't take this for granted.
- *
- * Parameters:
- *   2: status [0x00, 0x01 or 0x02]
- */
-#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT	0x02
-
-/*
- * Sets mode of power switch.
- *
- * What this actually does is not yet known. Maybe it enables some interrupt.
- *
- * Parameters:
- *   2: enable power switch? [0x00 or 0x01]
- *   3 (optional): enable nmi? [0x00 or 0x01]
- *
- * Returns:
- *   If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
- *   NMI is enabled. Otherwise unknown.
- */
-#define   SMU_CMD_MISC_df_NMI_OPTION		0x04
-
-/* Sets LED dimm offset.
- *
- * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
- * frequency) depends on current time. Therefore, the SMU needs to know the
- * timezone.
- *
- * Parameters:
- *   2-8: unknown (BCD coding)
- */
-#define   SMU_CMD_MISC_df_DIMM_OFFSET		0x99
-
-
-/*
- * Version info commands
- *
- * Parameters:
- *   1 (optional): Specifies version part to retrieve
- *
- * Returns:
- *   Version value
- */
-#define SMU_CMD_VERSION_COMMAND			0xea
-#define   SMU_VERSION_RUNNING			0x00
-#define   SMU_VERSION_BASE			0x01
-#define   SMU_VERSION_UPDATE			0x02
-
-
-/*
- * Switches
- *
- * These are switches whose status seems to be known to the SMU.
- *
- * Parameters:
- *   none
- *
- * Result:
- *   Switch bits (ORed, see below)
- */
-#define SMU_CMD_SWITCHES			0xdc
-
-/* Switches bits */
-#define SMU_SWITCH_CASE_CLOSED			0x01
-#define SMU_SWITCH_AC_POWER			0x04
-#define SMU_SWITCH_POWER_SWITCH			0x08
-
-
-/*
- * Misc commands
- *
- * This command seem to be a grab bag of various things
- *
- * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
- * transfer blocks of data from the SMU. So far, I've decrypted it's
- * usage to retrieve partition data. In order to do that, you have to
- * break your transfer in "chunks" since that command cannot transfer
- * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
- * but it seems that the darwin driver will let you do 0x1e bytes if
- * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
- * either in the last 16 bits of property "smu-version-pmu" or as the 16
- * bytes at offset 1 of "smu-version-info"
- *
- * For each chunk, the command takes 7 bytes of arguments:
- *  byte 0: subcommand code (0x02)
- *  byte 1: 0x04 (always, I don't know what it means, maybe the address
- *                space to use or some other nicety. It's hard coded in OF)
- *  byte 2..5: SMU address of the chunk (big endian 32 bits)
- *  byte 6: size to transfer (up to max chunk size)
- *
- * The data is returned directly
- */
-#define SMU_CMD_MISC_ee_COMMAND			0xee
-#define   SMU_CMD_MISC_ee_GET_DATABLOCK_REC	0x02
-
-/* Retrieves currently used watts.
- *
- * Parameters:
- *   1: 0x03 (Meaning unknown)
- */
-#define   SMU_CMD_MISC_ee_GET_WATTS		0x03
-
-#define   SMU_CMD_MISC_ee_LEDS_CTRL		0x04 /* i: 00 (00,01) [00] */
-#define   SMU_CMD_MISC_ee_GET_DATA		0x05 /* i: 00 , o: ?? */
-
-
-/*
- * Power related commands
- *
- * Parameters:
- *   1: subcommand
- */
-#define SMU_CMD_POWER_EVENTS_COMMAND		0x8f
-
-/* SMU_POWER_EVENTS subcommands */
-enum {
-	SMU_PWR_GET_POWERUP_EVENTS      = 0x00,
-	SMU_PWR_SET_POWERUP_EVENTS      = 0x01,
-	SMU_PWR_CLR_POWERUP_EVENTS      = 0x02,
-	SMU_PWR_GET_WAKEUP_EVENTS       = 0x03,
-	SMU_PWR_SET_WAKEUP_EVENTS       = 0x04,
-	SMU_PWR_CLR_WAKEUP_EVENTS       = 0x05,
-
-	/*
-	 * Get last shutdown cause
-	 *
-	 * Returns:
-	 *   1 byte (signed char): Last shutdown cause. Exact meaning unknown.
-	 */
-	SMU_PWR_LAST_SHUTDOWN_CAUSE	= 0x07,
-
-	/*
-	 * Sets or gets server ID. Meaning or use is unknown.
-	 *
-	 * Parameters:
-	 *   2 (optional): Set server ID (1 byte)
-	 *
-	 * Returns:
-	 *   1 byte (server ID?)
-	 */
-	SMU_PWR_SERVER_ID		= 0x08,
-};
-
-/* Power events wakeup bits */
-enum {
-	SMU_PWR_WAKEUP_KEY              = 0x01, /* Wake on key press */
-	SMU_PWR_WAKEUP_AC_INSERT        = 0x02, /* Wake on AC adapter plug */
-	SMU_PWR_WAKEUP_AC_CHANGE        = 0x04,
-	SMU_PWR_WAKEUP_LID_OPEN         = 0x08,
-	SMU_PWR_WAKEUP_RING             = 0x10,
-};
-
-
-/*
- * - Kernel side interface -
- */
-
-#ifdef __KERNEL__
-
-/*
- * Asynchronous SMU commands
- *
- * Fill up this structure and submit it via smu_queue_command(),
- * and get notified by the optional done() callback, or because
- * status becomes != 1
- */
-
-struct smu_cmd;
-
-struct smu_cmd
-{
-	/* public */
-	u8			cmd;		/* command */
-	int			data_len;	/* data len */
-	int			reply_len;	/* reply len */
-	void			*data_buf;	/* data buffer */
-	void			*reply_buf;	/* reply buffer */
-	int			status;		/* command status */
-	void			(*done)(struct smu_cmd *cmd, void *misc);
-	void			*misc;
-
-	/* private */
-	struct list_head	link;
-};
-
-/*
- * Queues an SMU command, all fields have to be initialized
- */
-extern int smu_queue_cmd(struct smu_cmd *cmd);
-
-/*
- * Simple command wrapper. This structure embeds a small buffer
- * to ease sending simple SMU commands from the stack
- */
-struct smu_simple_cmd
-{
-	struct smu_cmd	cmd;
-	u8	       	buffer[16];
-};
-
-/*
- * Queues a simple command. All fields will be initialized by that
- * function
- */
-extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
-			    unsigned int data_len,
-			    void (*done)(struct smu_cmd *cmd, void *misc),
-			    void *misc,
-			    ...);
-
-/*
- * Completion helper. Pass it to smu_queue_simple or as 'done'
- * member to smu_queue_cmd, it will call complete() on the struct
- * completion passed in the "misc" argument
- */
-extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
-
-/*
- * Synchronous helpers. Will spin-wait for completion of a command
- */
-extern void smu_spinwait_cmd(struct smu_cmd *cmd);
-
-static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
-{
-	smu_spinwait_cmd(&scmd->cmd);
-}
-
-/*
- * Poll routine to call if blocked with irqs off
- */
-extern void smu_poll(void);
-
-
-/*
- * Init routine, presence check....
- */
-extern int smu_init(void);
-extern int smu_present(void);
-struct of_device;
-extern struct of_device *smu_get_ofdev(void);
-
-
-/*
- * Common command wrappers
- */
-extern void smu_shutdown(void);
-extern void smu_restart(void);
-struct rtc_time;
-extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
-extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
-
-/*
- * SMU command buffer absolute address, exported by pmac_setup,
- * this is allocated very early during boot.
- */
-extern unsigned long smu_cmdbuf_abs;
-
-
-/*
- * Kenrel asynchronous i2c interface
- */
-
-#define SMU_I2C_READ_MAX	0x1d
-#define SMU_I2C_WRITE_MAX	0x15
-
-/* SMU i2c header, exactly matches i2c header on wire */
-struct smu_i2c_param
-{
-	u8	bus;		/* SMU bus ID (from device tree) */
-	u8	type;		/* i2c transfer type */
-	u8	devaddr;	/* device address (includes direction) */
-	u8	sublen;		/* subaddress length */
-	u8	subaddr[3];	/* subaddress */
-	u8	caddr;		/* combined address, filled by SMU driver */
-	u8	datalen;	/* length of transfer */
-	u8	data[SMU_I2C_READ_MAX];	/* data */
-};
-
-struct smu_i2c_cmd
-{
-	/* public */
-	struct smu_i2c_param	info;
-	void			(*done)(struct smu_i2c_cmd *cmd, void *misc);
-	void			*misc;
-	int			status; /* 1 = pending, 0 = ok, <0 = fail */
-
-	/* private */
-	struct smu_cmd		scmd;
-	int			read;
-	int			stage;
-	int			retries;
-	u8			pdata[32];
-	struct list_head	link;
-};
-
-/*
- * Call this to queue an i2c command to the SMU. You must fill info,
- * including info.data for a write, done and misc.
- * For now, no polling interface is provided so you have to use completion
- * callback.
- */
-extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
-
-
-#endif /* __KERNEL__ */
-
-
-/*
- * - SMU "sdb" partitions informations -
- */
-
-
-/*
- * Partition header format
- */
-struct smu_sdbp_header {
-	__u8	id;
-	__u8	len;
-	__u8	version;
-	__u8	flags;
-};
-
-
- /*
- * demangle 16 and 32 bits integer in some SMU partitions
- * (currently, afaik, this concerns only the FVT partition
- * (0x12)
- */
-#define SMU_U16_MIX(x)	le16_to_cpu(x);
-#define SMU_U32_MIX(x)  ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
-
-
-/* This is the definition of the SMU sdb-partition-0x12 table (called
- * CPU F/V/T operating points in Darwin). The definition for all those
- * SMU tables should be moved to some separate file
- */
-#define SMU_SDB_FVT_ID			0x12
-
-struct smu_sdbp_fvt {
-	__u32	sysclk;			/* Base SysClk frequency in Hz for
-					 * this operating point. Value need to
-					 * be unmixed with SMU_U32_MIX()
-					 */
-	__u8	pad;
-	__u8	maxtemp;		/* Max temp. supported by this
-					 * operating point
-					 */
-
-	__u16	volts[3];		/* CPU core voltage for the 3
-					 * PowerTune modes, a mode with
-					 * 0V = not supported. Value need
-					 * to be unmixed with SMU_U16_MIX()
-					 */
-};
-
-/* This partition contains voltage & current sensor calibration
- * informations
- */
-#define SMU_SDB_CPUVCP_ID		0x21
-
-struct smu_sdbp_cpuvcp {
-	__u16	volt_scale;		/* u4.12 fixed point */
-	__s16	volt_offset;		/* s4.12 fixed point */
-	__u16	curr_scale;		/* u4.12 fixed point */
-	__s16	curr_offset;		/* s4.12 fixed point */
-	__s32	power_quads[3];		/* s4.28 fixed point */
-};
-
-/* This partition contains CPU thermal diode calibration
- */
-#define SMU_SDB_CPUDIODE_ID		0x18
-
-struct smu_sdbp_cpudiode {
-	__u16	m_value;		/* u1.15 fixed point */
-	__s16	b_value;		/* s10.6 fixed point */
-
-};
-
-/* This partition contains Slots power calibration
- */
-#define SMU_SDB_SLOTSPOW_ID		0x78
-
-struct smu_sdbp_slotspow {
-	__u16	pow_scale;		/* u4.12 fixed point */
-	__s16	pow_offset;		/* s4.12 fixed point */
-};
-
-/* This partition contains machine specific version information about
- * the sensor/control layout
- */
-#define SMU_SDB_SENSORTREE_ID		0x25
-
-struct smu_sdbp_sensortree {
-	__u8	model_id;
-	__u8	unknown[3];
-};
-
-/* This partition contains CPU thermal control PID informations. So far
- * only single CPU machines have been seen with an SMU, so we assume this
- * carries only informations for those
- */
-#define SMU_SDB_CPUPIDDATA_ID		0x17
-
-struct smu_sdbp_cpupiddata {
-	__u8	unknown1;
-	__u8	target_temp_delta;
-	__u8	unknown2;
-	__u8	history_len;
-	__s16	power_adj;
-	__u16	max_power;
-	__s32	gp,gr,gd;
-};
-
-
-/* Other partitions without known structures */
-#define SMU_SDB_DEBUG_SWITCHES_ID	0x05
-
-#ifdef __KERNEL__
-/*
- * This returns the pointer to an SMU "sdb" partition data or NULL
- * if not found. The data format is described below
- */
-extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
-					unsigned int *size);
-
-/* Get "sdb" partition data from an SMU satellite */
-extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id,
-					int id, unsigned int *size);
-
-
-#endif /* __KERNEL__ */
-
-
-/*
- * - Userland interface -
- */
-
-/*
- * A given instance of the device can be configured for 2 different
- * things at the moment:
- *
- *  - sending SMU commands (default at open() time)
- *  - receiving SMU events (not yet implemented)
- *
- * Commands are written with write() of a command block. They can be
- * "driver" commands (for example to switch to event reception mode)
- * or real SMU commands. They are made of a header followed by command
- * data if any.
- *
- * For SMU commands (not for driver commands), you can then read() back
- * a reply. The reader will be blocked or not depending on how the device
- * file is opened. poll() isn't implemented yet. The reply will consist
- * of a header as well, followed by the reply data if any. You should
- * always provide a buffer large enough for the maximum reply data, I
- * recommand one page.
- *
- * It is illegal to send SMU commands through a file descriptor configured
- * for events reception
- *
- */
-struct smu_user_cmd_hdr
-{
-	__u32		cmdtype;
-#define SMU_CMDTYPE_SMU			0	/* SMU command */
-#define SMU_CMDTYPE_WANTS_EVENTS	1	/* switch fd to events mode */
-#define SMU_CMDTYPE_GET_PARTITION	2	/* retrieve an sdb partition */
-
-	__u8		cmd;			/* SMU command byte */
-	__u8		pad[3];			/* padding */
-	__u32		data_len;		/* Length of data following */
-};
-
-struct smu_user_reply_hdr
-{
-	__u32		status;			/* Command status */
-	__u32		reply_len;		/* Length of data follwing */
-};
-
-#endif /*  _SMU_H */
diff --git a/include/asm-powerpc/socket.h b/include/asm-powerpc/socket.h
deleted file mode 100644
index f5a4e168e498..000000000000
--- a/include/asm-powerpc/socket.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef _ASM_POWERPC_SOCKET_H
-#define _ASM_POWERPC_SOCKET_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_RCVLOWAT	16
-#define SO_SNDLOWAT	17
-#define SO_RCVTIMEO	18
-#define SO_SNDTIMEO	19
-#define SO_PASSCRED	20
-#define SO_PEERCRED	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/include/asm-powerpc/sockios.h b/include/asm-powerpc/sockios.h
deleted file mode 100644
index 55cef7675a31..000000000000
--- a/include/asm-powerpc/sockios.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_SOCKIOS_H
-#define _ASM_POWERPC_SOCKIOS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif	/* _ASM_POWERPC_SOCKIOS_H */
diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h
deleted file mode 100644
index 54a47ea2c3aa..000000000000
--- a/include/asm-powerpc/sparsemem.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _ASM_POWERPC_SPARSEMEM_H
-#define _ASM_POWERPC_SPARSEMEM_H 1
-#ifdef __KERNEL__
-
-#ifdef CONFIG_SPARSEMEM
-/*
- * SECTION_SIZE_BITS		2^N: how big each section will be
- * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
- * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
- */
-#define SECTION_SIZE_BITS       24
-
-#define MAX_PHYSADDR_BITS       44
-#define MAX_PHYSMEM_BITS        44
-
-#endif /* CONFIG_SPARSEMEM */
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-extern void create_section_mapping(unsigned long start, unsigned long end);
-extern int remove_section_mapping(unsigned long start, unsigned long end);
-#ifdef CONFIG_NUMA
-extern int hot_add_scn_to_nid(unsigned long scn_addr);
-#else
-static inline int hot_add_scn_to_nid(unsigned long scn_addr)
-{
-	return 0;
-}
-#endif /* CONFIG_NUMA */
-#endif /* CONFIG_MEMORY_HOTPLUG */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h
deleted file mode 100644
index f56a843f4705..000000000000
--- a/include/asm-powerpc/spinlock.h
+++ /dev/null
@@ -1,295 +0,0 @@
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-#ifdef __KERNEL__
-
-/*
- * Simple spin lock operations.  
- *
- * Copyright (C) 2001-2004 Paul Mackerras <paulus@au.ibm.com>, IBM
- * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
- * Copyright (C) 2002 Dave Engebretsen <engebret@us.ibm.com>, IBM
- *	Rework to support virtual processors
- *
- * Type of int is used as a full 64b word is not necessary.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * (the type definitions are in asm/spinlock_types.h)
- */
-#include <linux/irqflags.h>
-#ifdef CONFIG_PPC64
-#include <asm/paca.h>
-#include <asm/hvcall.h>
-#include <asm/iseries/hv_call.h>
-#endif
-#include <asm/asm-compat.h>
-#include <asm/synch.h>
-
-#define __raw_spin_is_locked(x)		((x)->slock != 0)
-
-#ifdef CONFIG_PPC64
-/* use 0x800000yy when locked, where yy == CPU number */
-#define LOCK_TOKEN	(*(u32 *)(&get_paca()->lock_token))
-#else
-#define LOCK_TOKEN	1
-#endif
-
-#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
-#define CLEAR_IO_SYNC	(get_paca()->io_sync = 0)
-#define SYNC_IO		do {						\
-				if (unlikely(get_paca()->io_sync)) {	\
-					mb();				\
-					get_paca()->io_sync = 0;	\
-				}					\
-			} while (0)
-#else
-#define CLEAR_IO_SYNC
-#define SYNC_IO
-#endif
-
-/*
- * This returns the old value in the lock, so we succeeded
- * in getting the lock if the return value is 0.
- */
-static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
-{
-	unsigned long tmp, token;
-
-	token = LOCK_TOKEN;
-	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
-	cmpwi		0,%0,0\n\
-	bne-		2f\n\
-	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
-	: "r" (token), "r" (&lock->slock)
-	: "cr0", "memory");
-
-	return tmp;
-}
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-	CLEAR_IO_SYNC;
-	return __spin_trylock(lock) == 0;
-}
-
-/*
- * On a system with shared processors (that is, where a physical
- * processor is multiplexed between several virtual processors),
- * there is no point spinning on a lock if the holder of the lock
- * isn't currently scheduled on a physical processor.  Instead
- * we detect this situation and ask the hypervisor to give the
- * rest of our timeslice to the lock holder.
- *
- * So that we can tell which virtual processor is holding a lock,
- * we put 0x80000000 | smp_processor_id() in the lock when it is
- * held.  Conveniently, we have a word in the paca that holds this
- * value.
- */
-
-#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
-/* We only yield to the hypervisor if we are in shared processor mode */
-#define SHARED_PROCESSOR (get_lppaca()->shared_proc)
-extern void __spin_yield(raw_spinlock_t *lock);
-extern void __rw_yield(raw_rwlock_t *lock);
-#else /* SPLPAR || ISERIES */
-#define __spin_yield(x)	barrier()
-#define __rw_yield(x)	barrier()
-#define SHARED_PROCESSOR	0
-#endif
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-	CLEAR_IO_SYNC;
-	while (1) {
-		if (likely(__spin_trylock(lock) == 0))
-			break;
-		do {
-			HMT_low();
-			if (SHARED_PROCESSOR)
-				__spin_yield(lock);
-		} while (unlikely(lock->slock != 0));
-		HMT_medium();
-	}
-}
-
-static inline
-void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
-{
-	unsigned long flags_dis;
-
-	CLEAR_IO_SYNC;
-	while (1) {
-		if (likely(__spin_trylock(lock) == 0))
-			break;
-		local_save_flags(flags_dis);
-		local_irq_restore(flags);
-		do {
-			HMT_low();
-			if (SHARED_PROCESSOR)
-				__spin_yield(lock);
-		} while (unlikely(lock->slock != 0));
-		HMT_medium();
-		local_irq_restore(flags_dis);
-	}
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-	SYNC_IO;
-	__asm__ __volatile__("# __raw_spin_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
-	lock->slock = 0;
-}
-
-#ifdef CONFIG_PPC64
-extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
-#else
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
-#endif
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-#define __raw_read_can_lock(rw)		((rw)->lock >= 0)
-#define __raw_write_can_lock(rw)	(!(rw)->lock)
-
-#ifdef CONFIG_PPC64
-#define __DO_SIGN_EXTEND	"extsw	%0,%0\n"
-#define WRLOCK_TOKEN		LOCK_TOKEN	/* it's negative */
-#else
-#define __DO_SIGN_EXTEND
-#define WRLOCK_TOKEN		(-1)
-#endif
-
-/*
- * This returns the old value in the lock + 1,
- * so we got a read lock if the return value is > 0.
- */
-static inline long __read_trylock(raw_rwlock_t *rw)
-{
-	long tmp;
-
-	__asm__ __volatile__(
-"1:	lwarx		%0,0,%1\n"
-	__DO_SIGN_EXTEND
-"	addic.		%0,%0,1\n\
-	ble-		2f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.		%0,0,%1\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
-	: "r" (&rw->lock)
-	: "cr0", "xer", "memory");
-
-	return tmp;
-}
-
-/*
- * This returns the old value in the lock,
- * so we got the write lock if the return value is 0.
- */
-static inline long __write_trylock(raw_rwlock_t *rw)
-{
-	long tmp, token;
-
-	token = WRLOCK_TOKEN;
-	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
-	cmpwi		0,%0,0\n\
-	bne-		2f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
-	: "r" (token), "r" (&rw->lock)
-	: "cr0", "memory");
-
-	return tmp;
-}
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
-	while (1) {
-		if (likely(__read_trylock(rw) > 0))
-			break;
-		do {
-			HMT_low();
-			if (SHARED_PROCESSOR)
-				__rw_yield(rw);
-		} while (unlikely(rw->lock < 0));
-		HMT_medium();
-	}
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
-	while (1) {
-		if (likely(__write_trylock(rw) == 0))
-			break;
-		do {
-			HMT_low();
-			if (SHARED_PROCESSOR)
-				__rw_yield(rw);
-		} while (unlikely(rw->lock != 0));
-		HMT_medium();
-	}
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *rw)
-{
-	return __read_trylock(rw) > 0;
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
-{
-	return __write_trylock(rw) == 0;
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
-	long tmp;
-
-	__asm__ __volatile__(
-	"# read_unlock\n\t"
-	LWSYNC_ON_SMP
-"1:	lwarx		%0,0,%1\n\
-	addic		%0,%0,-1\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.		%0,0,%1\n\
-	bne-		1b"
-	: "=&r"(tmp)
-	: "r"(&rw->lock)
-	: "cr0", "memory");
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
-	__asm__ __volatile__("# write_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
-	rw->lock = 0;
-}
-
-#define _raw_spin_relax(lock)	__spin_yield(lock)
-#define _raw_read_relax(lock)	__rw_yield(lock)
-#define _raw_write_relax(lock)	__rw_yield(lock)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-powerpc/spinlock_types.h b/include/asm-powerpc/spinlock_types.h
deleted file mode 100644
index 74236c9f05b1..000000000000
--- a/include/asm-powerpc/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H
-#define _ASM_POWERPC_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned int slock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile signed int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
-
-#endif
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
deleted file mode 100644
index 8b2eb044270a..000000000000
--- a/include/asm-powerpc/spu.h
+++ /dev/null
@@ -1,732 +0,0 @@
-/*
- * SPU core / file system interface and HW structures
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * Author: Arnd Bergmann <arndb@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPU_H
-#define _SPU_H
-#ifdef __KERNEL__
-
-#include <linux/workqueue.h>
-#include <linux/sysdev.h>
-
-#define LS_SIZE (256 * 1024)
-#define LS_ADDR_MASK (LS_SIZE - 1)
-
-#define MFC_PUT_CMD             0x20
-#define MFC_PUTS_CMD            0x28
-#define MFC_PUTR_CMD            0x30
-#define MFC_PUTF_CMD            0x22
-#define MFC_PUTB_CMD            0x21
-#define MFC_PUTFS_CMD           0x2A
-#define MFC_PUTBS_CMD           0x29
-#define MFC_PUTRF_CMD           0x32
-#define MFC_PUTRB_CMD           0x31
-#define MFC_PUTL_CMD            0x24
-#define MFC_PUTRL_CMD           0x34
-#define MFC_PUTLF_CMD           0x26
-#define MFC_PUTLB_CMD           0x25
-#define MFC_PUTRLF_CMD          0x36
-#define MFC_PUTRLB_CMD          0x35
-
-#define MFC_GET_CMD             0x40
-#define MFC_GETS_CMD            0x48
-#define MFC_GETF_CMD            0x42
-#define MFC_GETB_CMD            0x41
-#define MFC_GETFS_CMD           0x4A
-#define MFC_GETBS_CMD           0x49
-#define MFC_GETL_CMD            0x44
-#define MFC_GETLF_CMD           0x46
-#define MFC_GETLB_CMD           0x45
-
-#define MFC_SDCRT_CMD           0x80
-#define MFC_SDCRTST_CMD         0x81
-#define MFC_SDCRZ_CMD           0x89
-#define MFC_SDCRS_CMD           0x8D
-#define MFC_SDCRF_CMD           0x8F
-
-#define MFC_GETLLAR_CMD         0xD0
-#define MFC_PUTLLC_CMD          0xB4
-#define MFC_PUTLLUC_CMD         0xB0
-#define MFC_PUTQLLUC_CMD        0xB8
-#define MFC_SNDSIG_CMD          0xA0
-#define MFC_SNDSIGB_CMD         0xA1
-#define MFC_SNDSIGF_CMD         0xA2
-#define MFC_BARRIER_CMD         0xC0
-#define MFC_EIEIO_CMD           0xC8
-#define MFC_SYNC_CMD            0xCC
-
-#define MFC_MIN_DMA_SIZE_SHIFT  4       /* 16 bytes */
-#define MFC_MAX_DMA_SIZE_SHIFT  14      /* 16384 bytes */
-#define MFC_MIN_DMA_SIZE        (1 << MFC_MIN_DMA_SIZE_SHIFT)
-#define MFC_MAX_DMA_SIZE        (1 << MFC_MAX_DMA_SIZE_SHIFT)
-#define MFC_MIN_DMA_SIZE_MASK   (MFC_MIN_DMA_SIZE - 1)
-#define MFC_MAX_DMA_SIZE_MASK   (MFC_MAX_DMA_SIZE - 1)
-#define MFC_MIN_DMA_LIST_SIZE   0x0008  /*   8 bytes */
-#define MFC_MAX_DMA_LIST_SIZE   0x4000  /* 16K bytes */
-
-#define MFC_TAGID_TO_TAGMASK(tag_id)  (1 << (tag_id & 0x1F))
-
-/* Events for Channels 0-2 */
-#define MFC_DMA_TAG_STATUS_UPDATE_EVENT     0x00000001
-#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT  0x00000002
-#define MFC_DMA_QUEUE_AVAILABLE_EVENT       0x00000008
-#define MFC_SPU_MAILBOX_WRITTEN_EVENT       0x00000010
-#define MFC_DECREMENTER_EVENT               0x00000020
-#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT  0x00000040
-#define MFC_PU_MAILBOX_AVAILABLE_EVENT      0x00000080
-#define MFC_SIGNAL_2_EVENT                  0x00000100
-#define MFC_SIGNAL_1_EVENT                  0x00000200
-#define MFC_LLR_LOST_EVENT                  0x00000400
-#define MFC_PRIV_ATTN_EVENT                 0x00000800
-#define MFC_MULTI_SRC_EVENT                 0x00001000
-
-/* Flag indicating progress during context switch. */
-#define SPU_CONTEXT_SWITCH_PENDING	0UL
-#define SPU_CONTEXT_FAULT_PENDING	1UL
-
-struct spu_context;
-struct spu_runqueue;
-struct spu_lscsa;
-struct device_node;
-
-enum spu_utilization_state {
-	SPU_UTIL_USER,
-	SPU_UTIL_SYSTEM,
-	SPU_UTIL_IOWAIT,
-	SPU_UTIL_IDLE_LOADED,
-	SPU_UTIL_MAX
-};
-
-struct spu {
-	const char *name;
-	unsigned long local_store_phys;
-	u8 *local_store;
-	unsigned long problem_phys;
-	struct spu_problem __iomem *problem;
-	struct spu_priv2 __iomem *priv2;
-	struct list_head cbe_list;
-	struct list_head full_list;
-	enum { SPU_FREE, SPU_USED } alloc_state;
-	int number;
-	unsigned int irqs[3];
-	u32 node;
-	u64 flags;
-	u64 class_0_pending;
-	u64 class_0_dar;
-	u64 class_1_dar;
-	u64 class_1_dsisr;
-	size_t ls_size;
-	unsigned int slb_replace;
-	struct mm_struct *mm;
-	struct spu_context *ctx;
-	struct spu_runqueue *rq;
-	unsigned long long timestamp;
-	pid_t pid;
-	pid_t tgid;
-	spinlock_t register_lock;
-
-	void (* wbox_callback)(struct spu *spu);
-	void (* ibox_callback)(struct spu *spu);
-	void (* stop_callback)(struct spu *spu, int irq);
-	void (* mfc_callback)(struct spu *spu);
-
-	char irq_c0[8];
-	char irq_c1[8];
-	char irq_c2[8];
-
-	u64 spe_id;
-
-	void* pdata; /* platform private data */
-
-	/* of based platforms only */
-	struct device_node *devnode;
-
-	/* native only */
-	struct spu_priv1 __iomem *priv1;
-
-	/* beat only */
-	u64 shadow_int_mask_RW[3];
-
-	struct sys_device sysdev;
-
-	int has_mem_affinity;
-	struct list_head aff_list;
-
-	struct {
-		/* protected by interrupt reentrancy */
-		enum spu_utilization_state util_state;
-		unsigned long long tstamp;
-		unsigned long long times[SPU_UTIL_MAX];
-		unsigned long long vol_ctx_switch;
-		unsigned long long invol_ctx_switch;
-		unsigned long long min_flt;
-		unsigned long long maj_flt;
-		unsigned long long hash_flt;
-		unsigned long long slb_flt;
-		unsigned long long class2_intr;
-		unsigned long long libassist;
-	} stats;
-};
-
-struct cbe_spu_info {
-	struct mutex list_mutex;
-	struct list_head spus;
-	int n_spus;
-	int nr_active;
-	atomic_t busy_spus;
-	atomic_t reserved_spus;
-};
-
-extern struct cbe_spu_info cbe_spu_info[];
-
-void spu_init_channels(struct spu *spu);
-void spu_irq_setaffinity(struct spu *spu, int cpu);
-
-void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
-		void *code, int code_size);
-
-#ifdef CONFIG_KEXEC
-void crash_register_spus(struct list_head *list);
-#else
-static inline void crash_register_spus(struct list_head *list)
-{
-}
-#endif
-
-extern void spu_invalidate_slbs(struct spu *spu);
-extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
-int spu_64k_pages_available(void);
-
-/* Calls from the memory management to the SPU */
-struct mm_struct;
-extern void spu_flush_all_slbs(struct mm_struct *mm);
-
-/* This interface allows a profiler (e.g., OProfile) to store a ref
- * to spu context information that it creates.	This caching technique
- * avoids the need to recreate this information after a save/restore operation.
- *
- * Assumes the caller has already incremented the ref count to
- * profile_info; then spu_context_destroy must call kref_put
- * on prof_info_kref.
- */
-void spu_set_profile_private_kref(struct spu_context *ctx,
-				  struct kref *prof_info_kref,
-				  void ( * prof_info_release) (struct kref *kref));
-
-void *spu_get_profile_private_kref(struct spu_context *ctx);
-
-/* system callbacks from the SPU */
-struct spu_syscall_block {
-	u64 nr_ret;
-	u64 parm[6];
-};
-extern long spu_sys_callback(struct spu_syscall_block *s);
-
-/* syscalls implemented in spufs */
-struct file;
-struct spufs_calls {
-	long (*create_thread)(const char __user *name,
-					unsigned int flags, mode_t mode,
-					struct file *neighbor);
-	long (*spu_run)(struct file *filp, __u32 __user *unpc,
-						__u32 __user *ustatus);
-	int (*coredump_extra_notes_size)(void);
-	int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset);
-	void (*notify_spus_active)(void);
-	struct module *owner;
-};
-
-/* return status from spu_run, same as in libspe */
-#define SPE_EVENT_DMA_ALIGNMENT		0x0008	/*A DMA alignment error */
-#define SPE_EVENT_SPE_ERROR		0x0010	/*An illegal instruction error*/
-#define SPE_EVENT_SPE_DATA_SEGMENT	0x0020	/*A DMA segmentation error    */
-#define SPE_EVENT_SPE_DATA_STORAGE	0x0040	/*A DMA storage error */
-#define SPE_EVENT_INVALID_DMA		0x0800	/* Invalid MFC DMA */
-
-/*
- * Flags for sys_spu_create.
- */
-#define SPU_CREATE_EVENTS_ENABLED	0x0001
-#define SPU_CREATE_GANG			0x0002
-#define SPU_CREATE_NOSCHED		0x0004
-#define SPU_CREATE_ISOLATE		0x0008
-#define SPU_CREATE_AFFINITY_SPU		0x0010
-#define SPU_CREATE_AFFINITY_MEM		0x0020
-
-#define SPU_CREATE_FLAG_ALL		0x003f /* mask of all valid flags */
-
-
-int register_spu_syscalls(struct spufs_calls *calls);
-void unregister_spu_syscalls(struct spufs_calls *calls);
-
-int spu_add_sysdev_attr(struct sysdev_attribute *attr);
-void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
-
-int spu_add_sysdev_attr_group(struct attribute_group *attrs);
-void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
-
-int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
-		unsigned long dsisr, unsigned *flt);
-
-/*
- * Notifier blocks:
- *
- * oprofile can get notified when a context switch is performed
- * on an spe. The notifer function that gets called is passed
- * a pointer to the SPU structure as well as the object-id that
- * identifies the binary running on that SPU now.
- *
- * For a context save, the object-id that is passed is zero,
- * identifying that the kernel will run from that moment on.
- *
- * For a context restore, the object-id is the value written
- * to object-id spufs file from user space and the notifer
- * function can assume that spu->ctx is valid.
- */
-struct notifier_block;
-int spu_switch_event_register(struct notifier_block * n);
-int spu_switch_event_unregister(struct notifier_block * n);
-
-extern void notify_spus_active(void);
-extern void do_notify_spus_active(void);
-
-/*
- * This defines the Local Store, Problem Area and Privilege Area of an SPU.
- */
-
-union mfc_tag_size_class_cmd {
-	struct {
-		u16 mfc_size;
-		u16 mfc_tag;
-		u8  pad;
-		u8  mfc_rclassid;
-		u16 mfc_cmd;
-	} u;
-	struct {
-		u32 mfc_size_tag32;
-		u32 mfc_class_cmd32;
-	} by32;
-	u64 all64;
-};
-
-struct mfc_cq_sr {
-	u64 mfc_cq_data0_RW;
-	u64 mfc_cq_data1_RW;
-	u64 mfc_cq_data2_RW;
-	u64 mfc_cq_data3_RW;
-};
-
-struct spu_problem {
-#define MS_SYNC_PENDING         1L
-	u64 spc_mssync_RW;					/* 0x0000 */
-	u8  pad_0x0008_0x3000[0x3000 - 0x0008];
-
-	/* DMA Area */
-	u8  pad_0x3000_0x3004[0x4];				/* 0x3000 */
-	u32 mfc_lsa_W;						/* 0x3004 */
-	u64 mfc_ea_W;						/* 0x3008 */
-	union mfc_tag_size_class_cmd mfc_union_W;			/* 0x3010 */
-	u8  pad_0x3018_0x3104[0xec];				/* 0x3018 */
-	u32 dma_qstatus_R;					/* 0x3104 */
-	u8  pad_0x3108_0x3204[0xfc];				/* 0x3108 */
-	u32 dma_querytype_RW;					/* 0x3204 */
-	u8  pad_0x3208_0x321c[0x14];				/* 0x3208 */
-	u32 dma_querymask_RW;					/* 0x321c */
-	u8  pad_0x3220_0x322c[0xc];				/* 0x3220 */
-	u32 dma_tagstatus_R;					/* 0x322c */
-#define DMA_TAGSTATUS_INTR_ANY	1u
-#define DMA_TAGSTATUS_INTR_ALL	2u
-	u8  pad_0x3230_0x4000[0x4000 - 0x3230]; 		/* 0x3230 */
-
-	/* SPU Control Area */
-	u8  pad_0x4000_0x4004[0x4];				/* 0x4000 */
-	u32 pu_mb_R;						/* 0x4004 */
-	u8  pad_0x4008_0x400c[0x4];				/* 0x4008 */
-	u32 spu_mb_W;						/* 0x400c */
-	u8  pad_0x4010_0x4014[0x4];				/* 0x4010 */
-	u32 mb_stat_R;						/* 0x4014 */
-	u8  pad_0x4018_0x401c[0x4];				/* 0x4018 */
-	u32 spu_runcntl_RW;					/* 0x401c */
-#define SPU_RUNCNTL_STOP	0L
-#define SPU_RUNCNTL_RUNNABLE	1L
-#define SPU_RUNCNTL_ISOLATE	2L
-	u8  pad_0x4020_0x4024[0x4];				/* 0x4020 */
-	u32 spu_status_R;					/* 0x4024 */
-#define SPU_STOP_STATUS_SHIFT           16
-#define SPU_STATUS_STOPPED		0x0
-#define SPU_STATUS_RUNNING		0x1
-#define SPU_STATUS_STOPPED_BY_STOP	0x2
-#define SPU_STATUS_STOPPED_BY_HALT	0x4
-#define SPU_STATUS_WAITING_FOR_CHANNEL	0x8
-#define SPU_STATUS_SINGLE_STEP		0x10
-#define SPU_STATUS_INVALID_INSTR        0x20
-#define SPU_STATUS_INVALID_CH           0x40
-#define SPU_STATUS_ISOLATED_STATE       0x80
-#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200
-#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400
-	u8  pad_0x4028_0x402c[0x4];				/* 0x4028 */
-	u32 spu_spe_R;						/* 0x402c */
-	u8  pad_0x4030_0x4034[0x4];				/* 0x4030 */
-	u32 spu_npc_RW;						/* 0x4034 */
-	u8  pad_0x4038_0x14000[0x14000 - 0x4038];		/* 0x4038 */
-
-	/* Signal Notification Area */
-	u8  pad_0x14000_0x1400c[0xc];				/* 0x14000 */
-	u32 signal_notify1;					/* 0x1400c */
-	u8  pad_0x14010_0x1c00c[0x7ffc];			/* 0x14010 */
-	u32 signal_notify2;					/* 0x1c00c */
-} __attribute__ ((aligned(0x20000)));
-
-/* SPU Privilege 2 State Area */
-struct spu_priv2 {
-	/* MFC Registers */
-	u8  pad_0x0000_0x1100[0x1100 - 0x0000]; 		/* 0x0000 */
-
-	/* SLB Management Registers */
-	u8  pad_0x1100_0x1108[0x8];				/* 0x1100 */
-	u64 slb_index_W;					/* 0x1108 */
-#define SLB_INDEX_MASK				0x7L
-	u64 slb_esid_RW;					/* 0x1110 */
-	u64 slb_vsid_RW;					/* 0x1118 */
-#define SLB_VSID_SUPERVISOR_STATE	(0x1ull << 11)
-#define SLB_VSID_SUPERVISOR_STATE_MASK	(0x1ull << 11)
-#define SLB_VSID_PROBLEM_STATE		(0x1ull << 10)
-#define SLB_VSID_PROBLEM_STATE_MASK	(0x1ull << 10)
-#define SLB_VSID_EXECUTE_SEGMENT	(0x1ull << 9)
-#define SLB_VSID_NO_EXECUTE_SEGMENT	(0x1ull << 9)
-#define SLB_VSID_EXECUTE_SEGMENT_MASK	(0x1ull << 9)
-#define SLB_VSID_4K_PAGE		(0x0 << 8)
-#define SLB_VSID_LARGE_PAGE		(0x1ull << 8)
-#define SLB_VSID_PAGE_SIZE_MASK		(0x1ull << 8)
-#define SLB_VSID_CLASS_MASK		(0x1ull << 7)
-#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK	(0x1ull << 6)
-	u64 slb_invalidate_entry_W;				/* 0x1120 */
-	u64 slb_invalidate_all_W;				/* 0x1128 */
-	u8  pad_0x1130_0x2000[0x2000 - 0x1130]; 		/* 0x1130 */
-
-	/* Context Save / Restore Area */
-	struct mfc_cq_sr spuq[16];				/* 0x2000 */
-	struct mfc_cq_sr puq[8];				/* 0x2200 */
-	u8  pad_0x2300_0x3000[0x3000 - 0x2300]; 		/* 0x2300 */
-
-	/* MFC Control */
-	u64 mfc_control_RW;					/* 0x3000 */
-#define MFC_CNTL_RESUME_DMA_QUEUE		(0ull << 0)
-#define MFC_CNTL_SUSPEND_DMA_QUEUE		(1ull << 0)
-#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK		(1ull << 0)
-#define MFC_CNTL_SUSPEND_MASK			(1ull << 4)
-#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION	(0ull << 8)
-#define MFC_CNTL_SUSPEND_IN_PROGRESS		(1ull << 8)
-#define MFC_CNTL_SUSPEND_COMPLETE		(3ull << 8)
-#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK	(3ull << 8)
-#define MFC_CNTL_DMA_QUEUES_EMPTY		(1ull << 14)
-#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK		(1ull << 14)
-#define MFC_CNTL_PURGE_DMA_REQUEST		(1ull << 15)
-#define MFC_CNTL_PURGE_DMA_IN_PROGRESS		(1ull << 24)
-#define MFC_CNTL_PURGE_DMA_COMPLETE		(3ull << 24)
-#define MFC_CNTL_PURGE_DMA_STATUS_MASK		(3ull << 24)
-#define MFC_CNTL_RESTART_DMA_COMMAND		(1ull << 32)
-#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING	(1ull << 32)
-#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32)
-#define MFC_CNTL_MFC_PRIVILEGE_STATE		(2ull << 33)
-#define MFC_CNTL_MFC_PROBLEM_STATE		(3ull << 33)
-#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK	(3ull << 33)
-#define MFC_CNTL_DECREMENTER_HALTED		(1ull << 35)
-#define MFC_CNTL_DECREMENTER_RUNNING		(1ull << 40)
-#define MFC_CNTL_DECREMENTER_STATUS_MASK	(1ull << 40)
-	u8  pad_0x3008_0x4000[0x4000 - 0x3008]; 		/* 0x3008 */
-
-	/* Interrupt Mailbox */
-	u64 puint_mb_R;						/* 0x4000 */
-	u8  pad_0x4008_0x4040[0x4040 - 0x4008]; 		/* 0x4008 */
-
-	/* SPU Control */
-	u64 spu_privcntl_RW;					/* 0x4040 */
-#define SPU_PRIVCNTL_MODE_NORMAL		(0x0ull << 0)
-#define SPU_PRIVCNTL_MODE_SINGLE_STEP		(0x1ull << 0)
-#define SPU_PRIVCNTL_MODE_MASK			(0x1ull << 0)
-#define SPU_PRIVCNTL_NO_ATTENTION_EVENT		(0x0ull << 1)
-#define SPU_PRIVCNTL_ATTENTION_EVENT		(0x1ull << 1)
-#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK	(0x1ull << 1)
-#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL		(0x0ull << 2)
-#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK	(0x1ull << 2)
-	u8  pad_0x4048_0x4058[0x10];				/* 0x4048 */
-	u64 spu_lslr_RW;					/* 0x4058 */
-	u64 spu_chnlcntptr_RW;					/* 0x4060 */
-	u64 spu_chnlcnt_RW;					/* 0x4068 */
-	u64 spu_chnldata_RW;					/* 0x4070 */
-	u64 spu_cfg_RW;						/* 0x4078 */
-	u8  pad_0x4080_0x5000[0x5000 - 0x4080]; 		/* 0x4080 */
-
-	/* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */
-	u64 spu_pm_trace_tag_status_RW;				/* 0x5000 */
-	u64 spu_tag_status_query_RW;				/* 0x5008 */
-#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32)
-#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull)
-	u64 spu_cmd_buf1_RW;					/* 0x5010 */
-#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32)
-#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull)
-	u64 spu_cmd_buf2_RW;					/* 0x5018 */
-#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32)
-#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16)
-#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full)
-	u64 spu_atomic_status_RW;				/* 0x5020 */
-} __attribute__ ((aligned(0x20000)));
-
-/* SPU Privilege 1 State Area */
-struct spu_priv1 {
-	/* Control and Configuration Area */
-	u64 mfc_sr1_RW;						/* 0x000 */
-#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK	0x01ull
-#define MFC_STATE1_BUS_TLBIE_MASK		0x02ull
-#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK	0x04ull
-#define MFC_STATE1_PROBLEM_STATE_MASK		0x08ull
-#define MFC_STATE1_RELOCATE_MASK		0x10ull
-#define MFC_STATE1_MASTER_RUN_CONTROL_MASK	0x20ull
-#define MFC_STATE1_TABLE_SEARCH_MASK		0x40ull
-	u64 mfc_lpid_RW;					/* 0x008 */
-	u64 spu_idr_RW;						/* 0x010 */
-	u64 mfc_vr_RO;						/* 0x018 */
-#define MFC_VERSION_BITS		(0xffff << 16)
-#define MFC_REVISION_BITS		(0xffff)
-#define MFC_GET_VERSION_BITS(vr)	(((vr) & MFC_VERSION_BITS) >> 16)
-#define MFC_GET_REVISION_BITS(vr)	((vr) & MFC_REVISION_BITS)
-	u64 spu_vr_RO;						/* 0x020 */
-#define SPU_VERSION_BITS		(0xffff << 16)
-#define SPU_REVISION_BITS		(0xffff)
-#define SPU_GET_VERSION_BITS(vr)	(vr & SPU_VERSION_BITS) >> 16
-#define SPU_GET_REVISION_BITS(vr)	(vr & SPU_REVISION_BITS)
-	u8  pad_0x28_0x100[0x100 - 0x28];			/* 0x28 */
-
-	/* Interrupt Area */
-	u64 int_mask_RW[3];					/* 0x100 */
-#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR		0x1L
-#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR		0x2L
-#define CLASS0_ENABLE_SPU_ERROR_INTR			0x4L
-#define CLASS0_ENABLE_MFC_FIR_INTR			0x8L
-#define CLASS1_ENABLE_SEGMENT_FAULT_INTR		0x1L
-#define CLASS1_ENABLE_STORAGE_FAULT_INTR		0x2L
-#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR	0x4L
-#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR	0x8L
-#define CLASS2_ENABLE_MAILBOX_INTR			0x1L
-#define CLASS2_ENABLE_SPU_STOP_INTR			0x2L
-#define CLASS2_ENABLE_SPU_HALT_INTR			0x4L
-#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR	0x8L
-#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR		0x10L
-	u8  pad_0x118_0x140[0x28];				/* 0x118 */
-	u64 int_stat_RW[3];					/* 0x140 */
-#define CLASS0_DMA_ALIGNMENT_INTR			0x1L
-#define CLASS0_INVALID_DMA_COMMAND_INTR			0x2L
-#define CLASS0_SPU_ERROR_INTR				0x4L
-#define CLASS0_INTR_MASK				0x7L
-#define CLASS1_SEGMENT_FAULT_INTR			0x1L
-#define CLASS1_STORAGE_FAULT_INTR			0x2L
-#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR		0x4L
-#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR		0x8L
-#define CLASS1_INTR_MASK				0xfL
-#define CLASS2_MAILBOX_INTR				0x1L
-#define CLASS2_SPU_STOP_INTR				0x2L
-#define CLASS2_SPU_HALT_INTR				0x4L
-#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR		0x8L
-#define CLASS2_MAILBOX_THRESHOLD_INTR			0x10L
-#define CLASS2_INTR_MASK				0x1fL
-	u8  pad_0x158_0x180[0x28];				/* 0x158 */
-	u64 int_route_RW;					/* 0x180 */
-
-	/* Interrupt Routing */
-	u8  pad_0x188_0x200[0x200 - 0x188];			/* 0x188 */
-
-	/* Atomic Unit Control Area */
-	u64 mfc_atomic_flush_RW;				/* 0x200 */
-#define mfc_atomic_flush_enable			0x1L
-	u8  pad_0x208_0x280[0x78];				/* 0x208 */
-	u64 resource_allocation_groupID_RW;			/* 0x280 */
-	u64 resource_allocation_enable_RW; 			/* 0x288 */
-	u8  pad_0x290_0x3c8[0x3c8 - 0x290];			/* 0x290 */
-
-	/* SPU_Cache_ImplRegs: Implementation-dependent cache registers */
-
-	u64 smf_sbi_signal_sel;					/* 0x3c8 */
-#define smf_sbi_mask_lsb	56
-#define smf_sbi_shift		(63 - smf_sbi_mask_lsb)
-#define smf_sbi_mask		(0x301LL << smf_sbi_shift)
-#define smf_sbi_bus0_bits	(0x001LL << smf_sbi_shift)
-#define smf_sbi_bus2_bits	(0x100LL << smf_sbi_shift)
-#define smf_sbi2_bus0_bits	(0x201LL << smf_sbi_shift)
-#define smf_sbi2_bus2_bits	(0x300LL << smf_sbi_shift)
-	u64 smf_ato_signal_sel;					/* 0x3d0 */
-#define smf_ato_mask_lsb	35
-#define smf_ato_shift		(63 - smf_ato_mask_lsb)
-#define smf_ato_mask		(0x3LL << smf_ato_shift)
-#define smf_ato_bus0_bits	(0x2LL << smf_ato_shift)
-#define smf_ato_bus2_bits	(0x1LL << smf_ato_shift)
-	u8  pad_0x3d8_0x400[0x400 - 0x3d8];			/* 0x3d8 */
-
-	/* TLB Management Registers */
-	u64 mfc_sdr_RW;						/* 0x400 */
-	u8  pad_0x408_0x500[0xf8];				/* 0x408 */
-	u64 tlb_index_hint_RO;					/* 0x500 */
-	u64 tlb_index_W;					/* 0x508 */
-	u64 tlb_vpn_RW;						/* 0x510 */
-	u64 tlb_rpn_RW;						/* 0x518 */
-	u8  pad_0x520_0x540[0x20];				/* 0x520 */
-	u64 tlb_invalidate_entry_W;				/* 0x540 */
-	u64 tlb_invalidate_all_W;				/* 0x548 */
-	u8  pad_0x550_0x580[0x580 - 0x550];			/* 0x550 */
-
-	/* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */
-	u64 smm_hid;						/* 0x580 */
-#define PAGE_SIZE_MASK		0xf000000000000000ull
-#define PAGE_SIZE_16MB_64KB	0x2000000000000000ull
-	u8  pad_0x588_0x600[0x600 - 0x588];			/* 0x588 */
-
-	/* MFC Status/Control Area */
-	u64 mfc_accr_RW;					/* 0x600 */
-#define MFC_ACCR_EA_ACCESS_GET		(1 << 0)
-#define MFC_ACCR_EA_ACCESS_PUT		(1 << 1)
-#define MFC_ACCR_LS_ACCESS_GET		(1 << 3)
-#define MFC_ACCR_LS_ACCESS_PUT		(1 << 4)
-	u8  pad_0x608_0x610[0x8];				/* 0x608 */
-	u64 mfc_dsisr_RW;					/* 0x610 */
-#define MFC_DSISR_PTE_NOT_FOUND		(1 << 30)
-#define MFC_DSISR_ACCESS_DENIED		(1 << 27)
-#define MFC_DSISR_ATOMIC		(1 << 26)
-#define MFC_DSISR_ACCESS_PUT		(1 << 25)
-#define MFC_DSISR_ADDR_MATCH		(1 << 22)
-#define MFC_DSISR_LS			(1 << 17)
-#define MFC_DSISR_L			(1 << 16)
-#define MFC_DSISR_ADDRESS_OVERFLOW	(1 << 0)
-	u8  pad_0x618_0x620[0x8];				/* 0x618 */
-	u64 mfc_dar_RW;						/* 0x620 */
-	u8  pad_0x628_0x700[0x700 - 0x628];			/* 0x628 */
-
-	/* Replacement Management Table (RMT) Area */
-	u64 rmt_index_RW;					/* 0x700 */
-	u8  pad_0x708_0x710[0x8];				/* 0x708 */
-	u64 rmt_data1_RW;					/* 0x710 */
-	u8  pad_0x718_0x800[0x800 - 0x718];			/* 0x718 */
-
-	/* Control/Configuration Registers */
-	u64 mfc_dsir_R;						/* 0x800 */
-#define MFC_DSIR_Q			(1 << 31)
-#define MFC_DSIR_SPU_QUEUE		MFC_DSIR_Q
-	u64 mfc_lsacr_RW;					/* 0x808 */
-#define MFC_LSACR_COMPARE_MASK		((~0ull) << 32)
-#define MFC_LSACR_COMPARE_ADDR		((~0ull) >> 32)
-	u64 mfc_lscrr_R;					/* 0x810 */
-#define MFC_LSCRR_Q			(1 << 31)
-#define MFC_LSCRR_SPU_QUEUE		MFC_LSCRR_Q
-#define MFC_LSCRR_QI_SHIFT		32
-#define MFC_LSCRR_QI_MASK		((~0ull) << MFC_LSCRR_QI_SHIFT)
-	u8  pad_0x818_0x820[0x8];				/* 0x818 */
-	u64 mfc_tclass_id_RW;					/* 0x820 */
-#define MFC_TCLASS_ID_ENABLE		(1L << 0L)
-#define MFC_TCLASS_SLOT2_ENABLE		(1L << 5L)
-#define MFC_TCLASS_SLOT1_ENABLE		(1L << 6L)
-#define MFC_TCLASS_SLOT0_ENABLE		(1L << 7L)
-#define MFC_TCLASS_QUOTA_2_SHIFT	8L
-#define MFC_TCLASS_QUOTA_1_SHIFT	16L
-#define MFC_TCLASS_QUOTA_0_SHIFT	24L
-#define MFC_TCLASS_QUOTA_2_MASK		(0x1FL << MFC_TCLASS_QUOTA_2_SHIFT)
-#define MFC_TCLASS_QUOTA_1_MASK		(0x1FL << MFC_TCLASS_QUOTA_1_SHIFT)
-#define MFC_TCLASS_QUOTA_0_MASK		(0x1FL << MFC_TCLASS_QUOTA_0_SHIFT)
-	u8  pad_0x828_0x900[0x900 - 0x828];			/* 0x828 */
-
-	/* Real Mode Support Registers */
-	u64 mfc_rm_boundary;					/* 0x900 */
-	u8  pad_0x908_0x938[0x30];				/* 0x908 */
-	u64 smf_dma_signal_sel;					/* 0x938 */
-#define mfc_dma1_mask_lsb	41
-#define mfc_dma1_shift		(63 - mfc_dma1_mask_lsb)
-#define mfc_dma1_mask		(0x3LL << mfc_dma1_shift)
-#define mfc_dma1_bits		(0x1LL << mfc_dma1_shift)
-#define mfc_dma2_mask_lsb	43
-#define mfc_dma2_shift		(63 - mfc_dma2_mask_lsb)
-#define mfc_dma2_mask		(0x3LL << mfc_dma2_shift)
-#define mfc_dma2_bits		(0x1LL << mfc_dma2_shift)
-	u8  pad_0x940_0xa38[0xf8];				/* 0x940 */
-	u64 smm_signal_sel;					/* 0xa38 */
-#define smm_sig_mask_lsb	12
-#define smm_sig_shift		(63 - smm_sig_mask_lsb)
-#define smm_sig_mask		(0x3LL << smm_sig_shift)
-#define smm_sig_bus0_bits	(0x2LL << smm_sig_shift)
-#define smm_sig_bus2_bits	(0x1LL << smm_sig_shift)
-	u8  pad_0xa40_0xc00[0xc00 - 0xa40];			/* 0xa40 */
-
-	/* DMA Command Error Area */
-	u64 mfc_cer_R;						/* 0xc00 */
-#define MFC_CER_Q		(1 << 31)
-#define MFC_CER_SPU_QUEUE	MFC_CER_Q
-	u8  pad_0xc08_0x1000[0x1000 - 0xc08];			/* 0xc08 */
-
-	/* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */
-	/* DMA Command Error Area */
-	u64 spu_ecc_cntl_RW;					/* 0x1000 */
-#define SPU_ECC_CNTL_E			(1ull << 0ull)
-#define SPU_ECC_CNTL_ENABLE		SPU_ECC_CNTL_E
-#define SPU_ECC_CNTL_DISABLE		(~SPU_ECC_CNTL_E & 1L)
-#define SPU_ECC_CNTL_S			(1ull << 1ull)
-#define SPU_ECC_STOP_AFTER_ERROR	SPU_ECC_CNTL_S
-#define SPU_ECC_CONTINUE_AFTER_ERROR	(~SPU_ECC_CNTL_S & 2L)
-#define SPU_ECC_CNTL_B			(1ull << 2ull)
-#define SPU_ECC_BACKGROUND_ENABLE	SPU_ECC_CNTL_B
-#define SPU_ECC_BACKGROUND_DISABLE	(~SPU_ECC_CNTL_B & 4L)
-#define SPU_ECC_CNTL_I_SHIFT		3ull
-#define SPU_ECC_CNTL_I_MASK		(3ull << SPU_ECC_CNTL_I_SHIFT)
-#define SPU_ECC_WRITE_ALWAYS		(~SPU_ECC_CNTL_I & 12L)
-#define SPU_ECC_WRITE_CORRECTABLE	(1ull << SPU_ECC_CNTL_I_SHIFT)
-#define SPU_ECC_WRITE_UNCORRECTABLE	(3ull << SPU_ECC_CNTL_I_SHIFT)
-#define SPU_ECC_CNTL_D			(1ull << 5ull)
-#define SPU_ECC_DETECTION_ENABLE	SPU_ECC_CNTL_D
-#define SPU_ECC_DETECTION_DISABLE	(~SPU_ECC_CNTL_D & 32L)
-	u64 spu_ecc_stat_RW;					/* 0x1008 */
-#define SPU_ECC_CORRECTED_ERROR		(1ull << 0ul)
-#define SPU_ECC_UNCORRECTED_ERROR	(1ull << 1ul)
-#define SPU_ECC_SCRUB_COMPLETE		(1ull << 2ul)
-#define SPU_ECC_SCRUB_IN_PROGRESS	(1ull << 3ul)
-#define SPU_ECC_INSTRUCTION_ERROR	(1ull << 4ul)
-#define SPU_ECC_DATA_ERROR		(1ull << 5ul)
-#define SPU_ECC_DMA_ERROR		(1ull << 6ul)
-#define SPU_ECC_STATUS_CNT_MASK		(256ull << 8)
-	u64 spu_ecc_addr_RW;					/* 0x1010 */
-	u64 spu_err_mask_RW;					/* 0x1018 */
-#define SPU_ERR_ILLEGAL_INSTR		(1ull << 0ul)
-#define SPU_ERR_ILLEGAL_CHANNEL		(1ull << 1ul)
-	u8  pad_0x1020_0x1028[0x1028 - 0x1020];			/* 0x1020 */
-
-	/* SPU Debug-Trace Bus (DTB) Selection Registers */
-	u64 spu_trig0_sel;					/* 0x1028 */
-	u64 spu_trig1_sel;					/* 0x1030 */
-	u64 spu_trig2_sel;					/* 0x1038 */
-	u64 spu_trig3_sel;					/* 0x1040 */
-	u64 spu_trace_sel;					/* 0x1048 */
-#define spu_trace_sel_mask		0x1f1fLL
-#define spu_trace_sel_bus0_bits		0x1000LL
-#define spu_trace_sel_bus2_bits		0x0010LL
-	u64 spu_event0_sel;					/* 0x1050 */
-	u64 spu_event1_sel;					/* 0x1058 */
-	u64 spu_event2_sel;					/* 0x1060 */
-	u64 spu_event3_sel;					/* 0x1068 */
-	u64 spu_trace_cntl;					/* 0x1070 */
-} __attribute__ ((aligned(0x2000)));
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
deleted file mode 100644
index a40fd491250c..000000000000
--- a/include/asm-powerpc/spu_csa.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * spu_csa.h: Definitions for SPU context save area (CSA).
- *
- * (C) Copyright IBM 2005
- *
- * Author: Mark Nutter <mnutter@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPU_CSA_H_
-#define _SPU_CSA_H_
-#ifdef __KERNEL__
-
-/*
- * Total number of 128-bit registers.
- */
-#define NR_SPU_GPRS         	128
-#define NR_SPU_SPRS         	9
-#define NR_SPU_REGS_PAD	    	7
-#define NR_SPU_SPILL_REGS   	144	/* GPRS + SPRS + PAD */
-#define SIZEOF_SPU_SPILL_REGS	NR_SPU_SPILL_REGS * 16
-
-#define SPU_SAVE_COMPLETE      	0x3FFB
-#define SPU_RESTORE_COMPLETE   	0x3FFC
-
-/*
- * Definitions for various 'stopped' status conditions,
- * to be recreated during context restore.
- */
-#define SPU_STOPPED_STATUS_P    1
-#define SPU_STOPPED_STATUS_I    2
-#define SPU_STOPPED_STATUS_H    3
-#define SPU_STOPPED_STATUS_S    4
-#define SPU_STOPPED_STATUS_S_I  5
-#define SPU_STOPPED_STATUS_S_P  6
-#define SPU_STOPPED_STATUS_P_H  7
-#define SPU_STOPPED_STATUS_P_I  8
-#define SPU_STOPPED_STATUS_R    9
-
-/*
- * Definitions for software decrementer status flag.
- */
-#define SPU_DECR_STATUS_RUNNING 0x1
-#define SPU_DECR_STATUS_WRAPPED 0x2
-
-#ifndef  __ASSEMBLY__
-/**
- * spu_reg128 - generic 128-bit register definition.
- */
-struct spu_reg128 {
-	u32 slot[4];
-};
-
-/**
- * struct spu_lscsa - Local Store Context Save Area.
- * @gprs: Array of saved registers.
- * @fpcr: Saved floating point status control register.
- * @decr: Saved decrementer value.
- * @decr_status: Indicates software decrementer status flags.
- * @ppu_mb: Saved PPU mailbox data.
- * @ppuint_mb: Saved PPU interrupting mailbox data.
- * @tag_mask: Saved tag group mask.
- * @event_mask: Saved event mask.
- * @srr0: Saved SRR0.
- * @stopped_status: Conditions to be recreated by restore.
- * @ls: Saved contents of Local Storage Area.
- *
- * The LSCSA represents state that is primarily saved and
- * restored by SPU-side code.
- */
-struct spu_lscsa {
-	struct spu_reg128 gprs[128];
-	struct spu_reg128 fpcr;
-	struct spu_reg128 decr;
-	struct spu_reg128 decr_status;
-	struct spu_reg128 ppu_mb;
-	struct spu_reg128 ppuint_mb;
-	struct spu_reg128 tag_mask;
-	struct spu_reg128 event_mask;
-	struct spu_reg128 srr0;
-	struct spu_reg128 stopped_status;
-
-	/*
-	 * 'ls' must be page-aligned on all configurations.
-	 * Since we don't want to rely on having the spu-gcc
-	 * installed to build the kernel and this structure
-	 * is used in the SPU-side code, make it 64k-page
-	 * aligned for now.
-	 */
-	unsigned char ls[LS_SIZE] __attribute__((aligned(65536)));
-};
-
-#ifndef __SPU__
-/*
- * struct spu_problem_collapsed - condensed problem state area, w/o pads.
- */
-struct spu_problem_collapsed {
-	u64 spc_mssync_RW;
-	u32 mfc_lsa_W;
-	u32 unused_pad0;
-	u64 mfc_ea_W;
-	union mfc_tag_size_class_cmd mfc_union_W;
-	u32 dma_qstatus_R;
-	u32 dma_querytype_RW;
-	u32 dma_querymask_RW;
-	u32 dma_tagstatus_R;
-	u32 pu_mb_R;
-	u32 spu_mb_W;
-	u32 mb_stat_R;
-	u32 spu_runcntl_RW;
-	u32 spu_status_R;
-	u32 spu_spc_R;
-	u32 spu_npc_RW;
-	u32 signal_notify1;
-	u32 signal_notify2;
-	u32 unused_pad1;
-};
-
-/*
- * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads.
- */
-struct spu_priv1_collapsed {
-	u64 mfc_sr1_RW;
-	u64 mfc_lpid_RW;
-	u64 spu_idr_RW;
-	u64 mfc_vr_RO;
-	u64 spu_vr_RO;
-	u64 int_mask_class0_RW;
-	u64 int_mask_class1_RW;
-	u64 int_mask_class2_RW;
-	u64 int_stat_class0_RW;
-	u64 int_stat_class1_RW;
-	u64 int_stat_class2_RW;
-	u64 int_route_RW;
-	u64 mfc_atomic_flush_RW;
-	u64 resource_allocation_groupID_RW;
-	u64 resource_allocation_enable_RW;
-	u64 mfc_fir_R;
-	u64 mfc_fir_status_or_W;
-	u64 mfc_fir_status_and_W;
-	u64 mfc_fir_mask_R;
-	u64 mfc_fir_mask_or_W;
-	u64 mfc_fir_mask_and_W;
-	u64 mfc_fir_chkstp_enable_RW;
-	u64 smf_sbi_signal_sel;
-	u64 smf_ato_signal_sel;
-	u64 tlb_index_hint_RO;
-	u64 tlb_index_W;
-	u64 tlb_vpn_RW;
-	u64 tlb_rpn_RW;
-	u64 tlb_invalidate_entry_W;
-	u64 tlb_invalidate_all_W;
-	u64 smm_hid;
-	u64 mfc_accr_RW;
-	u64 mfc_dsisr_RW;
-	u64 mfc_dar_RW;
-	u64 rmt_index_RW;
-	u64 rmt_data1_RW;
-	u64 mfc_dsir_R;
-	u64 mfc_lsacr_RW;
-	u64 mfc_lscrr_R;
-	u64 mfc_tclass_id_RW;
-	u64 mfc_rm_boundary;
-	u64 smf_dma_signal_sel;
-	u64 smm_signal_sel;
-	u64 mfc_cer_R;
-	u64 pu_ecc_cntl_RW;
-	u64 pu_ecc_stat_RW;
-	u64 spu_ecc_addr_RW;
-	u64 spu_err_mask_RW;
-	u64 spu_trig0_sel;
-	u64 spu_trig1_sel;
-	u64 spu_trig2_sel;
-	u64 spu_trig3_sel;
-	u64 spu_trace_sel;
-	u64 spu_event0_sel;
-	u64 spu_event1_sel;
-	u64 spu_event2_sel;
-	u64 spu_event3_sel;
-	u64 spu_trace_cntl;
-};
-
-/*
- * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
- */
-struct spu_priv2_collapsed {
-	u64 slb_index_W;
-	u64 slb_esid_RW;
-	u64 slb_vsid_RW;
-	u64 slb_invalidate_entry_W;
-	u64 slb_invalidate_all_W;
-	struct mfc_cq_sr spuq[16];
-	struct mfc_cq_sr puq[8];
-	u64 mfc_control_RW;
-	u64 puint_mb_R;
-	u64 spu_privcntl_RW;
-	u64 spu_lslr_RW;
-	u64 spu_chnlcntptr_RW;
-	u64 spu_chnlcnt_RW;
-	u64 spu_chnldata_RW;
-	u64 spu_cfg_RW;
-	u64 spu_tag_status_query_RW;
-	u64 spu_cmd_buf1_RW;
-	u64 spu_cmd_buf2_RW;
-	u64 spu_atomic_status_RW;
-};
-
-/**
- * struct spu_state
- * @lscsa: Local Store Context Save Area.
- * @prob: Collapsed Problem State Area, w/o pads.
- * @priv1: Collapsed Privileged 1 Area, w/o pads.
- * @priv2: Collapsed Privileged 2 Area, w/o pads.
- * @spu_chnlcnt_RW: Array of saved channel counts.
- * @spu_chnldata_RW: Array of saved channel data.
- * @suspend_time: Time stamp when decrementer disabled.
- *
- * Structure representing the whole of the SPU
- * context save area (CSA).  This struct contains
- * all of the state necessary to suspend and then
- * later optionally resume execution of an SPU
- * context.
- *
- * The @lscsa region is by far the largest, and is
- * allocated separately so that it may either be
- * pinned or mapped to/from application memory, as
- * appropriate for the OS environment.
- */
-struct spu_state {
-	struct spu_lscsa *lscsa;
-#ifdef CONFIG_SPU_FS_64K_LS
-	int		use_big_pages;
-	/* One struct page per 64k page */
-#define SPU_LSCSA_NUM_BIG_PAGES	(sizeof(struct spu_lscsa) / 0x10000)
-	struct page	*lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES];
-#endif
-	struct spu_problem_collapsed prob;
-	struct spu_priv1_collapsed priv1;
-	struct spu_priv2_collapsed priv2;
-	u64 spu_chnlcnt_RW[32];
-	u64 spu_chnldata_RW[32];
-	u32 spu_mailbox_data[4];
-	u32 pu_mailbox_data[1];
-	u64 class_0_dar, class_0_pending;
-	u64 class_1_dar, class_1_dsisr;
-	unsigned long suspend_time;
-	spinlock_t register_lock;
-};
-
-#endif /* !__SPU__ */
-#endif /* __KERNEL__ */
-#endif /* !__ASSEMBLY__ */
-#endif /* _SPU_CSA_H_ */
diff --git a/include/asm-powerpc/spu_info.h b/include/asm-powerpc/spu_info.h
deleted file mode 100644
index 3545efbf9891..000000000000
--- a/include/asm-powerpc/spu_info.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * SPU info structures
- *
- * (C) Copyright 2006 IBM Corp.
- *
- * Author: Dwayne Grant McConnell <decimal@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SPU_INFO_H
-#define _SPU_INFO_H
-
-#ifdef __KERNEL__
-#include <asm/spu.h>
-#include <linux/types.h>
-#else
-struct mfc_cq_sr {
-	__u64 mfc_cq_data0_RW;
-	__u64 mfc_cq_data1_RW;
-	__u64 mfc_cq_data2_RW;
-	__u64 mfc_cq_data3_RW;
-};
-#endif /* __KERNEL__ */
-
-struct spu_dma_info {
-	__u64 dma_info_type;
-	__u64 dma_info_mask;
-	__u64 dma_info_status;
-	__u64 dma_info_stall_and_notify;
-	__u64 dma_info_atomic_command_status;
-	struct mfc_cq_sr dma_info_command_data[16];
-};
-
-struct spu_proxydma_info {
-	__u64 proxydma_info_type;
-	__u64 proxydma_info_mask;
-	__u64 proxydma_info_status;
-	struct mfc_cq_sr proxydma_info_command_data[8];
-};
-
-#endif
diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h
deleted file mode 100644
index 25020a34ce7f..000000000000
--- a/include/asm-powerpc/spu_priv1.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Defines an spu hypervisor abstraction layer.
- *
- *  Copyright 2006 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(_SPU_PRIV1_H)
-#define _SPU_PRIV1_H
-#if defined(__KERNEL__)
-
-#include <linux/types.h>
-
-struct spu;
-struct spu_context;
-
-/* access to priv1 registers */
-
-struct spu_priv1_ops {
-	void (*int_mask_and) (struct spu *spu, int class, u64 mask);
-	void (*int_mask_or) (struct spu *spu, int class, u64 mask);
-	void (*int_mask_set) (struct spu *spu, int class, u64 mask);
-	u64 (*int_mask_get) (struct spu *spu, int class);
-	void (*int_stat_clear) (struct spu *spu, int class, u64 stat);
-	u64 (*int_stat_get) (struct spu *spu, int class);
-	void (*cpu_affinity_set) (struct spu *spu, int cpu);
-	u64 (*mfc_dar_get) (struct spu *spu);
-	u64 (*mfc_dsisr_get) (struct spu *spu);
-	void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr);
-	void (*mfc_sdr_setup) (struct spu *spu);
-	void (*mfc_sr1_set) (struct spu *spu, u64 sr1);
-	u64 (*mfc_sr1_get) (struct spu *spu);
-	void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id);
-	u64 (*mfc_tclass_id_get) (struct spu *spu);
-	void (*tlb_invalidate) (struct spu *spu);
-	void (*resource_allocation_groupID_set) (struct spu *spu, u64 id);
-	u64 (*resource_allocation_groupID_get) (struct spu *spu);
-	void (*resource_allocation_enable_set) (struct spu *spu, u64 enable);
-	u64 (*resource_allocation_enable_get) (struct spu *spu);
-};
-
-extern const struct spu_priv1_ops* spu_priv1_ops;
-
-static inline void
-spu_int_mask_and (struct spu *spu, int class, u64 mask)
-{
-	spu_priv1_ops->int_mask_and(spu, class, mask);
-}
-
-static inline void
-spu_int_mask_or (struct spu *spu, int class, u64 mask)
-{
-	spu_priv1_ops->int_mask_or(spu, class, mask);
-}
-
-static inline void
-spu_int_mask_set (struct spu *spu, int class, u64 mask)
-{
-	spu_priv1_ops->int_mask_set(spu, class, mask);
-}
-
-static inline u64
-spu_int_mask_get (struct spu *spu, int class)
-{
-	return spu_priv1_ops->int_mask_get(spu, class);
-}
-
-static inline void
-spu_int_stat_clear (struct spu *spu, int class, u64 stat)
-{
-	spu_priv1_ops->int_stat_clear(spu, class, stat);
-}
-
-static inline u64
-spu_int_stat_get (struct spu *spu, int class)
-{
-	return spu_priv1_ops->int_stat_get (spu, class);
-}
-
-static inline void
-spu_cpu_affinity_set (struct spu *spu, int cpu)
-{
-	spu_priv1_ops->cpu_affinity_set(spu, cpu);
-}
-
-static inline u64
-spu_mfc_dar_get (struct spu *spu)
-{
-	return spu_priv1_ops->mfc_dar_get(spu);
-}
-
-static inline u64
-spu_mfc_dsisr_get (struct spu *spu)
-{
-	return spu_priv1_ops->mfc_dsisr_get(spu);
-}
-
-static inline void
-spu_mfc_dsisr_set (struct spu *spu, u64 dsisr)
-{
-	spu_priv1_ops->mfc_dsisr_set(spu, dsisr);
-}
-
-static inline void
-spu_mfc_sdr_setup (struct spu *spu)
-{
-	spu_priv1_ops->mfc_sdr_setup(spu);
-}
-
-static inline void
-spu_mfc_sr1_set (struct spu *spu, u64 sr1)
-{
-	spu_priv1_ops->mfc_sr1_set(spu, sr1);
-}
-
-static inline u64
-spu_mfc_sr1_get (struct spu *spu)
-{
-	return spu_priv1_ops->mfc_sr1_get(spu);
-}
-
-static inline void
-spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id)
-{
-	spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id);
-}
-
-static inline u64
-spu_mfc_tclass_id_get (struct spu *spu)
-{
-	return spu_priv1_ops->mfc_tclass_id_get(spu);
-}
-
-static inline void
-spu_tlb_invalidate (struct spu *spu)
-{
-	spu_priv1_ops->tlb_invalidate(spu);
-}
-
-static inline void
-spu_resource_allocation_groupID_set (struct spu *spu, u64 id)
-{
-	spu_priv1_ops->resource_allocation_groupID_set(spu, id);
-}
-
-static inline u64
-spu_resource_allocation_groupID_get (struct spu *spu)
-{
-	return spu_priv1_ops->resource_allocation_groupID_get(spu);
-}
-
-static inline void
-spu_resource_allocation_enable_set (struct spu *spu, u64 enable)
-{
-	spu_priv1_ops->resource_allocation_enable_set(spu, enable);
-}
-
-static inline u64
-spu_resource_allocation_enable_get (struct spu *spu)
-{
-	return spu_priv1_ops->resource_allocation_enable_get(spu);
-}
-
-/* spu management abstraction */
-
-struct spu_management_ops {
-	int (*enumerate_spus)(int (*fn)(void *data));
-	int (*create_spu)(struct spu *spu, void *data);
-	int (*destroy_spu)(struct spu *spu);
-	void (*enable_spu)(struct spu_context *ctx);
-	void (*disable_spu)(struct spu_context *ctx);
-	int (*init_affinity)(void);
-};
-
-extern const struct spu_management_ops* spu_management_ops;
-
-static inline int
-spu_enumerate_spus (int (*fn)(void *data))
-{
-	return spu_management_ops->enumerate_spus(fn);
-}
-
-static inline int
-spu_create_spu (struct spu *spu, void *data)
-{
-	return spu_management_ops->create_spu(spu, data);
-}
-
-static inline int
-spu_destroy_spu (struct spu *spu)
-{
-	return spu_management_ops->destroy_spu(spu);
-}
-
-static inline int
-spu_init_affinity (void)
-{
-	return spu_management_ops->init_affinity();
-}
-
-static inline void
-spu_enable_spu (struct spu_context *ctx)
-{
-	spu_management_ops->enable_spu(ctx);
-}
-
-static inline void
-spu_disable_spu (struct spu_context *ctx)
-{
-	spu_management_ops->disable_spu(ctx);
-}
-
-/*
- * The declarations folowing are put here for convenience
- * and only intended to be used by the platform setup code.
- */
-
-extern const struct spu_priv1_ops spu_priv1_mmio_ops;
-extern const struct spu_priv1_ops spu_priv1_beat_ops;
-
-extern const struct spu_management_ops spu_management_of_ops;
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-powerpc/sstep.h b/include/asm-powerpc/sstep.h
deleted file mode 100644
index f593b0f9b627..000000000000
--- a/include/asm-powerpc/sstep.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-struct pt_regs;
-
-/*
- * We don't allow single-stepping an mtmsrd that would clear
- * MSR_RI, since that would make the exception unrecoverable.
- * Since we need to single-step to proceed from a breakpoint,
- * we don't allow putting a breakpoint on an mtmsrd instruction.
- * Similarly we don't allow breakpoints on rfid instructions.
- * These macros tell us if an instruction is a mtmsrd or rfid.
- * Note that IS_MTMSRD returns true for both an mtmsr (32-bit)
- * and an mtmsrd (64-bit).
- */
-#define IS_MTMSRD(instr)	(((instr) & 0xfc0007be) == 0x7c000124)
-#define IS_RFID(instr)		(((instr) & 0xfc0007fe) == 0x4c000024)
-#define IS_RFI(instr)		(((instr) & 0xfc0007fe) == 0x4c000064)
-
-/* Emulate instructions that cause a transfer of control. */
-extern int emulate_step(struct pt_regs *regs, unsigned int instr);
diff --git a/include/asm-powerpc/stat.h b/include/asm-powerpc/stat.h
deleted file mode 100644
index e4edc510b530..000000000000
--- a/include/asm-powerpc/stat.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef _ASM_POWERPC_STAT_H
-#define _ASM_POWERPC_STAT_H
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-
-#define STAT_HAVE_NSEC 1
-
-#ifndef __powerpc64__
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-#endif /* !__powerpc64__ */
-
-struct stat {
-	unsigned long	st_dev;
-	ino_t		st_ino;
-#ifdef __powerpc64__
-	nlink_t		st_nlink;
-	mode_t		st_mode;
-#else
-	mode_t		st_mode;
-	nlink_t		st_nlink;
-#endif
-	uid_t		st_uid;
-	gid_t		st_gid;
-	unsigned long	st_rdev;
-	off_t		st_size;
-	unsigned long	st_blksize;
-	unsigned long	st_blocks;
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-	unsigned long	__unused4;
-	unsigned long	__unused5;
-#ifdef __powerpc64__
-	unsigned long	__unused6;
-#endif
-};
-
-/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
-struct stat64 {
-	unsigned long long st_dev;		/* Device.  */
-	unsigned long long st_ino;		/* File serial number.  */
-	unsigned int	st_mode;	/* File mode.  */
-	unsigned int	st_nlink;	/* Link count.  */
-	unsigned int	st_uid;		/* User ID of the file's owner.  */
-	unsigned int	st_gid;		/* Group ID of the file's group. */
-	unsigned long long st_rdev;	/* Device number, if device.  */
-	unsigned short	__pad2;
-	long long	st_size;	/* Size of file, in bytes.  */
-	int		st_blksize;	/* Optimal block size for I/O.  */
-	long long	st_blocks;	/* Number 512-byte blocks allocated. */
-	int		st_atime;	/* Time of last access.  */
-	unsigned int	st_atime_nsec;
-	int		st_mtime;	/* Time of last modification.  */
-	unsigned int	st_mtime_nsec;
-	int		st_ctime;	/* Time of last status change.  */
-	unsigned int	st_ctime_nsec;
-	unsigned int	__unused4;
-	unsigned int	__unused5;
-};
-
-#endif /* _ASM_POWERPC_STAT_H */
diff --git a/include/asm-powerpc/statfs.h b/include/asm-powerpc/statfs.h
deleted file mode 100644
index 67024026c10d..000000000000
--- a/include/asm-powerpc/statfs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _ASM_POWERPC_STATFS_H
-#define _ASM_POWERPC_STATFS_H
-
-/* For ppc32 we just use the generic definitions, not so simple on ppc64 */
-
-#ifndef __powerpc64__
-#include <asm-generic/statfs.h>
-#else
-
-#ifndef __KERNEL_STRICT_NAMES
-#include <linux/types.h>
-typedef __kernel_fsid_t	fsid_t;
-#endif
-
-/*
- * We're already 64-bit, so duplicate the definition
- */
-struct statfs {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct statfs64 {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct compat_statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-};
-#endif /* ! __powerpc64__ */
-#endif
diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h
deleted file mode 100644
index e40010abcaf1..000000000000
--- a/include/asm-powerpc/string.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _ASM_POWERPC_STRING_H
-#define _ASM_POWERPC_STRING_H
-
-#ifdef __KERNEL__
-
-#define __HAVE_ARCH_STRCPY
-#define __HAVE_ARCH_STRNCPY
-#define __HAVE_ARCH_STRLEN
-#define __HAVE_ARCH_STRCMP
-#define __HAVE_ARCH_STRNCMP
-#define __HAVE_ARCH_STRCAT
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMMOVE
-#define __HAVE_ARCH_MEMCMP
-#define __HAVE_ARCH_MEMCHR
-
-extern char * strcpy(char *,const char *);
-extern char * strncpy(char *,const char *, __kernel_size_t);
-extern __kernel_size_t strlen(const char *);
-extern int strcmp(const char *,const char *);
-extern int strncmp(const char *, const char *, __kernel_size_t);
-extern char * strcat(char *, const char *);
-extern void * memset(void *,int,__kernel_size_t);
-extern void * memcpy(void *,const void *,__kernel_size_t);
-extern void * memmove(void *,const void *,__kernel_size_t);
-extern int memcmp(const void *,const void *,__kernel_size_t);
-extern void * memchr(const void *,int,__kernel_size_t);
-
-#endif /* __KERNEL__ */
-
-#endif	/* _ASM_POWERPC_STRING_H */
diff --git a/include/asm-powerpc/suspend.h b/include/asm-powerpc/suspend.h
deleted file mode 100644
index cbf2c9404c37..000000000000
--- a/include/asm-powerpc/suspend.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_POWERPC_SUSPEND_H
-#define __ASM_POWERPC_SUSPEND_H
-
-static inline int arch_prepare_suspend(void) { return 0; }
-
-void save_processor_state(void);
-void restore_processor_state(void);
-
-#endif /* __ASM_POWERPC_SUSPEND_H */
diff --git a/include/asm-powerpc/synch.h b/include/asm-powerpc/synch.h
deleted file mode 100644
index 45963e80f557..000000000000
--- a/include/asm-powerpc/synch.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _ASM_POWERPC_SYNCH_H 
-#define _ASM_POWERPC_SYNCH_H 
-#ifdef __KERNEL__
-
-#include <linux/stringify.h>
-#include <asm/feature-fixups.h>
-
-#ifndef __ASSEMBLY__
-extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
-extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
-			     void *fixup_end);
-
-static inline void eieio(void)
-{
-	__asm__ __volatile__ ("eieio" : : : "memory");
-}
-
-static inline void isync(void)
-{
-	__asm__ __volatile__ ("isync" : : : "memory");
-}
-#endif /* __ASSEMBLY__ */
-
-#if defined(__powerpc64__)
-#    define LWSYNC	lwsync
-#elif defined(CONFIG_E500)
-#    define LWSYNC					\
-	START_LWSYNC_SECTION(96);			\
-	sync;						\
-	MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup);
-#else
-#    define LWSYNC	sync
-#endif
-
-#ifdef CONFIG_SMP
-#define ISYNC_ON_SMP	"\n\tisync\n"
-#define LWSYNC_ON_SMP	stringify_in_c(LWSYNC) "\n"
-#else
-#define ISYNC_ON_SMP
-#define LWSYNC_ON_SMP
-#endif
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_SYNCH_H */
diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h
deleted file mode 100644
index 2b8a458f990a..000000000000
--- a/include/asm-powerpc/syscalls.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef __ASM_POWERPC_SYSCALLS_H
-#define __ASM_POWERPC_SYSCALLS_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <asm/signal.h>
-
-struct new_utsname;
-struct pt_regs;
-struct rtas_args;
-struct sigaction;
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
-		unsigned long prot, unsigned long flags,
-		unsigned long fd, off_t offset);
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
-		unsigned long prot, unsigned long flags,
-		unsigned long fd, unsigned long pgoff);
-asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
-		unsigned long a2, unsigned long a3, unsigned long a4,
-		unsigned long a5, struct pt_regs *regs);
-asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
-		int __user *parent_tidp, void __user *child_threadptr,
-		int __user *child_tidp, int p6, struct pt_regs *regs);
-asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
-		unsigned long p3, unsigned long p4, unsigned long p5,
-		unsigned long p6, struct pt_regs *regs);
-asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
-		unsigned long p3, unsigned long p4, unsigned long p5,
-		unsigned long p6, struct pt_regs *regs);
-asmlinkage long sys_pipe(int __user *fildes);
-asmlinkage long sys_rt_sigaction(int sig,
-		const struct sigaction __user *act,
-		struct sigaction __user *oact, size_t sigsetsize);
-asmlinkage int sys_ipc(uint call, int first, unsigned long second,
-		long third, void __user *ptr, long fifth);
-asmlinkage long ppc64_personality(unsigned long personality);
-asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
-asmlinkage time_t sys64_time(time_t __user * tloc);
-asmlinkage long ppc_newuname(struct new_utsname __user * name);
-
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
-		size_t sigsetsize);
-asmlinkage long sys_sigaltstack(const stack_t __user *uss,
-		stack_t __user *uoss, unsigned long r5, unsigned long r6,
-		unsigned long r7, unsigned long r8, struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
deleted file mode 100644
index ae7085c65692..000000000000
--- a/include/asm-powerpc/systbl.h
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * List of powerpc syscalls. For the meaning of the _SPU suffix see
- * arch/powerpc/platforms/cell/spu_callbacks.c
- */
-
-SYSCALL(restart_syscall)
-SYSCALL(exit)
-PPC_SYS(fork)
-SYSCALL_SPU(read)
-SYSCALL_SPU(write)
-COMPAT_SYS_SPU(open)
-SYSCALL_SPU(close)
-COMPAT_SYS_SPU(waitpid)
-COMPAT_SYS_SPU(creat)
-SYSCALL_SPU(link)
-SYSCALL_SPU(unlink)
-COMPAT_SYS(execve)
-SYSCALL_SPU(chdir)
-COMPAT_SYS_SPU(time)
-SYSCALL_SPU(mknod)
-SYSCALL_SPU(chmod)
-SYSCALL_SPU(lchown)
-SYSCALL(ni_syscall)
-OLDSYS(stat)
-SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek)
-SYSCALL_SPU(getpid)
-COMPAT_SYS(mount)
-SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount)
-SYSCALL_SPU(setuid)
-SYSCALL_SPU(getuid)
-COMPAT_SYS_SPU(stime)
-COMPAT_SYS(ptrace)
-SYSCALL_SPU(alarm)
-OLDSYS(fstat)
-COMPAT_SYS(pause)
-COMPAT_SYS(utime)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(access)
-COMPAT_SYS_SPU(nice)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(sync)
-COMPAT_SYS_SPU(kill)
-SYSCALL_SPU(rename)
-COMPAT_SYS_SPU(mkdir)
-SYSCALL_SPU(rmdir)
-SYSCALL_SPU(dup)
-SYSCALL_SPU(pipe)
-COMPAT_SYS_SPU(times)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(brk)
-SYSCALL_SPU(setgid)
-SYSCALL_SPU(getgid)
-SYSCALL(signal)
-SYSCALL_SPU(geteuid)
-SYSCALL_SPU(getegid)
-SYSCALL(acct)
-SYSCALL(umount)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(ioctl)
-COMPAT_SYS_SPU(fcntl)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(setpgid)
-SYSCALL(ni_syscall)
-SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
-COMPAT_SYS_SPU(umask)
-SYSCALL_SPU(chroot)
-SYSCALL(ustat)
-SYSCALL_SPU(dup2)
-SYSCALL_SPU(getppid)
-SYSCALL_SPU(getpgrp)
-SYSCALL_SPU(setsid)
-SYS32ONLY(sigaction)
-SYSCALL_SPU(sgetmask)
-COMPAT_SYS_SPU(ssetmask)
-SYSCALL_SPU(setreuid)
-SYSCALL_SPU(setregid)
-SYS32ONLY(sigsuspend)
-COMPAT_SYS(sigpending)
-COMPAT_SYS_SPU(sethostname)
-COMPAT_SYS_SPU(setrlimit)
-COMPAT_SYS(old_getrlimit)
-COMPAT_SYS_SPU(getrusage)
-COMPAT_SYS_SPU(gettimeofday)
-COMPAT_SYS_SPU(settimeofday)
-COMPAT_SYS_SPU(getgroups)
-COMPAT_SYS_SPU(setgroups)
-SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select)
-SYSCALL_SPU(symlink)
-OLDSYS(lstat)
-COMPAT_SYS_SPU(readlink)
-SYSCALL(uselib)
-SYSCALL(swapon)
-SYSCALL(reboot)
-SYSX(sys_ni_syscall,old32_readdir,old_readdir)
-SYSCALL_SPU(mmap)
-SYSCALL_SPU(munmap)
-SYSCALL_SPU(truncate)
-SYSCALL_SPU(ftruncate)
-SYSCALL_SPU(fchmod)
-SYSCALL_SPU(fchown)
-COMPAT_SYS_SPU(getpriority)
-COMPAT_SYS_SPU(setpriority)
-SYSCALL(ni_syscall)
-COMPAT_SYS(statfs)
-COMPAT_SYS(fstatfs)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(socketcall)
-COMPAT_SYS_SPU(syslog)
-COMPAT_SYS_SPU(setitimer)
-COMPAT_SYS_SPU(getitimer)
-COMPAT_SYS_SPU(newstat)
-COMPAT_SYS_SPU(newlstat)
-COMPAT_SYS_SPU(newfstat)
-SYSX(sys_ni_syscall,sys_uname,sys_uname)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(vhangup)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(wait4)
-SYSCALL(swapoff)
-COMPAT_SYS_SPU(sysinfo)
-COMPAT_SYS(ipc)
-SYSCALL_SPU(fsync)
-SYS32ONLY(sigreturn)
-PPC_SYS(clone)
-COMPAT_SYS_SPU(setdomainname)
-PPC_SYS_SPU(newuname)
-SYSCALL(ni_syscall)
-COMPAT_SYS_SPU(adjtimex)
-SYSCALL_SPU(mprotect)
-SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask)
-SYSCALL(ni_syscall)
-SYSCALL(init_module)
-SYSCALL(delete_module)
-SYSCALL(ni_syscall)
-SYSCALL(quotactl)
-COMPAT_SYS_SPU(getpgid)
-SYSCALL_SPU(fchdir)
-SYSCALL_SPU(bdflush)
-COMPAT_SYS(sysfs)
-SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(setfsuid)
-SYSCALL_SPU(setfsgid)
-SYSCALL_SPU(llseek)
-COMPAT_SYS_SPU(getdents)
-SYSX_SPU(sys_select,ppc32_select,ppc_select)
-SYSCALL_SPU(flock)
-SYSCALL_SPU(msync)
-COMPAT_SYS_SPU(readv)
-COMPAT_SYS_SPU(writev)
-COMPAT_SYS_SPU(getsid)
-SYSCALL_SPU(fdatasync)
-COMPAT_SYS(sysctl)
-SYSCALL_SPU(mlock)
-SYSCALL_SPU(munlock)
-SYSCALL_SPU(mlockall)
-SYSCALL_SPU(munlockall)
-COMPAT_SYS_SPU(sched_setparam)
-COMPAT_SYS_SPU(sched_getparam)
-COMPAT_SYS_SPU(sched_setscheduler)
-COMPAT_SYS_SPU(sched_getscheduler)
-SYSCALL_SPU(sched_yield)
-COMPAT_SYS_SPU(sched_get_priority_max)
-COMPAT_SYS_SPU(sched_get_priority_min)
-COMPAT_SYS_SPU(sched_rr_get_interval)
-COMPAT_SYS_SPU(nanosleep)
-SYSCALL_SPU(mremap)
-SYSCALL_SPU(setresuid)
-SYSCALL_SPU(getresuid)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(poll)
-COMPAT_SYS(nfsservctl)
-SYSCALL_SPU(setresgid)
-SYSCALL_SPU(getresgid)
-COMPAT_SYS_SPU(prctl)
-COMPAT_SYS(rt_sigreturn)
-COMPAT_SYS(rt_sigaction)
-COMPAT_SYS(rt_sigprocmask)
-COMPAT_SYS(rt_sigpending)
-COMPAT_SYS(rt_sigtimedwait)
-COMPAT_SYS(rt_sigqueueinfo)
-COMPAT_SYS(rt_sigsuspend)
-COMPAT_SYS_SPU(pread64)
-COMPAT_SYS_SPU(pwrite64)
-SYSCALL_SPU(chown)
-SYSCALL_SPU(getcwd)
-SYSCALL_SPU(capget)
-SYSCALL_SPU(capset)
-COMPAT_SYS(sigaltstack)
-SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-PPC_SYS(vfork)
-COMPAT_SYS_SPU(getrlimit)
-COMPAT_SYS_SPU(readahead)
-SYS32ONLY(mmap2)
-SYS32ONLY(truncate64)
-SYS32ONLY(ftruncate64)
-SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
-SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
-SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
-SYSCALL(pciconfig_read)
-SYSCALL(pciconfig_write)
-SYSCALL(pciconfig_iobase)
-SYSCALL(ni_syscall)
-SYSCALL_SPU(getdents64)
-SYSCALL_SPU(pivot_root)
-SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64)
-SYSCALL_SPU(madvise)
-SYSCALL_SPU(mincore)
-SYSCALL_SPU(gettid)
-SYSCALL_SPU(tkill)
-SYSCALL_SPU(setxattr)
-SYSCALL_SPU(lsetxattr)
-SYSCALL_SPU(fsetxattr)
-SYSCALL_SPU(getxattr)
-SYSCALL_SPU(lgetxattr)
-SYSCALL_SPU(fgetxattr)
-SYSCALL_SPU(listxattr)
-SYSCALL_SPU(llistxattr)
-SYSCALL_SPU(flistxattr)
-SYSCALL_SPU(removexattr)
-SYSCALL_SPU(lremovexattr)
-SYSCALL_SPU(fremovexattr)
-COMPAT_SYS_SPU(futex)
-COMPAT_SYS_SPU(sched_setaffinity)
-COMPAT_SYS_SPU(sched_getaffinity)
-SYSCALL(ni_syscall)
-SYSCALL(ni_syscall)
-SYS32ONLY(sendfile64)
-COMPAT_SYS_SPU(io_setup)
-SYSCALL_SPU(io_destroy)
-COMPAT_SYS_SPU(io_getevents)
-COMPAT_SYS_SPU(io_submit)
-SYSCALL_SPU(io_cancel)
-SYSCALL(set_tid_address)
-SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64)
-SYSCALL(exit_group)
-SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie)
-SYSCALL_SPU(epoll_create)
-SYSCALL_SPU(epoll_ctl)
-SYSCALL_SPU(epoll_wait)
-SYSCALL_SPU(remap_file_pages)
-SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create)
-COMPAT_SYS_SPU(timer_settime)
-COMPAT_SYS_SPU(timer_gettime)
-SYSCALL_SPU(timer_getoverrun)
-SYSCALL_SPU(timer_delete)
-COMPAT_SYS_SPU(clock_settime)
-COMPAT_SYS_SPU(clock_gettime)
-COMPAT_SYS_SPU(clock_getres)
-COMPAT_SYS_SPU(clock_nanosleep)
-SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
-COMPAT_SYS_SPU(tgkill)
-COMPAT_SYS_SPU(utimes)
-COMPAT_SYS_SPU(statfs64)
-COMPAT_SYS_SPU(fstatfs64)
-SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
-PPC_SYS_SPU(rtas)
-OLDSYS(debug_setcontext)
-SYSCALL(ni_syscall)
-COMPAT_SYS(migrate_pages)
-COMPAT_SYS(mbind)
-COMPAT_SYS(get_mempolicy)
-COMPAT_SYS(set_mempolicy)
-COMPAT_SYS(mq_open)
-SYSCALL(mq_unlink)
-COMPAT_SYS(mq_timedsend)
-COMPAT_SYS(mq_timedreceive)
-COMPAT_SYS(mq_notify)
-COMPAT_SYS(mq_getsetattr)
-COMPAT_SYS(kexec_load)
-COMPAT_SYS(add_key)
-COMPAT_SYS(request_key)
-COMPAT_SYS(keyctl)
-COMPAT_SYS(waitid)
-COMPAT_SYS(ioprio_set)
-COMPAT_SYS(ioprio_get)
-SYSCALL(inotify_init)
-SYSCALL(inotify_add_watch)
-SYSCALL(inotify_rm_watch)
-SYSCALL(spu_run)
-SYSCALL(spu_create)
-COMPAT_SYS(pselect6)
-COMPAT_SYS(ppoll)
-SYSCALL_SPU(unshare)
-SYSCALL_SPU(splice)
-SYSCALL_SPU(tee)
-COMPAT_SYS_SPU(vmsplice)
-COMPAT_SYS_SPU(openat)
-SYSCALL_SPU(mkdirat)
-SYSCALL_SPU(mknodat)
-SYSCALL_SPU(fchownat)
-COMPAT_SYS_SPU(futimesat)
-SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
-SYSCALL_SPU(unlinkat)
-SYSCALL_SPU(renameat)
-SYSCALL_SPU(linkat)
-SYSCALL_SPU(symlinkat)
-SYSCALL_SPU(readlinkat)
-SYSCALL_SPU(fchmodat)
-SYSCALL_SPU(faccessat)
-COMPAT_SYS_SPU(get_robust_list)
-COMPAT_SYS_SPU(set_robust_list)
-COMPAT_SYS_SPU(move_pages)
-SYSCALL_SPU(getcpu)
-COMPAT_SYS(epoll_pwait)
-COMPAT_SYS_SPU(utimensat)
-COMPAT_SYS_SPU(signalfd)
-SYSCALL_SPU(timerfd_create)
-SYSCALL_SPU(eventfd)
-COMPAT_SYS_SPU(sync_file_range2)
-COMPAT_SYS(fallocate)
-SYSCALL(subpage_prot)
-COMPAT_SYS_SPU(timerfd_settime)
-COMPAT_SYS_SPU(timerfd_gettime)
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
deleted file mode 100644
index e6e25e2364eb..000000000000
--- a/include/asm-powerpc/system.h
+++ /dev/null
@@ -1,546 +0,0 @@
-/*
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- */
-#ifndef _ASM_POWERPC_SYSTEM_H
-#define _ASM_POWERPC_SYSTEM_H
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-#include <asm/hw_irq.h>
-
-/*
- * Memory barrier.
- * The sync instruction guarantees that all memory accesses initiated
- * by this processor have been performed (with respect to all other
- * mechanisms that access memory).  The eieio instruction is a barrier
- * providing an ordering (separately) for (a) cacheable stores and (b)
- * loads and stores to non-cacheable memory (e.g. I/O devices).
- *
- * mb() prevents loads and stores being reordered across this point.
- * rmb() prevents loads being reordered across this point.
- * wmb() prevents stores being reordered across this point.
- * read_barrier_depends() prevents data-dependent loads being reordered
- *	across this point (nop on PPC).
- *
- * We have to use the sync instructions for mb(), since lwsync doesn't
- * order loads with respect to previous stores.  Lwsync is fine for
- * rmb(), though. Note that rmb() actually uses a sync on 32-bit
- * architectures.
- *
- * For wmb(), we use sync since wmb is used in drivers to order
- * stores to system memory with respect to writes to the device.
- * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
- * on SMP since it is only used to order updates to system memory.
- */
-#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
-#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
-#define read_barrier_depends()  do { } while(0)
-
-#define set_mb(var, value)	do { var = value; mb(); } while (0)
-
-#ifdef __KERNEL__
-#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
-#ifdef CONFIG_SMP
-
-#ifdef __SUBARCH_HAS_LWSYNC
-#    define SMPWMB      lwsync
-#else
-#    define SMPWMB      eieio
-#endif
-
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	__asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif /* CONFIG_SMP */
-
-/*
- * This is a barrier which prevents following instructions from being
- * started until the value of the argument x is known.  For example, if
- * x is a variable loaded from memory, this prevents following
- * instructions from being executed until the load has been performed.
- */
-#define data_barrier(x)	\
-	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
-
-struct task_struct;
-struct pt_regs;
-
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-
-extern int (*__debugger)(struct pt_regs *regs);
-extern int (*__debugger_ipi)(struct pt_regs *regs);
-extern int (*__debugger_bpt)(struct pt_regs *regs);
-extern int (*__debugger_sstep)(struct pt_regs *regs);
-extern int (*__debugger_iabr_match)(struct pt_regs *regs);
-extern int (*__debugger_dabr_match)(struct pt_regs *regs);
-extern int (*__debugger_fault_handler)(struct pt_regs *regs);
-
-#define DEBUGGER_BOILERPLATE(__NAME) \
-static inline int __NAME(struct pt_regs *regs) \
-{ \
-	if (unlikely(__ ## __NAME)) \
-		return __ ## __NAME(regs); \
-	return 0; \
-}
-
-DEBUGGER_BOILERPLATE(debugger)
-DEBUGGER_BOILERPLATE(debugger_ipi)
-DEBUGGER_BOILERPLATE(debugger_bpt)
-DEBUGGER_BOILERPLATE(debugger_sstep)
-DEBUGGER_BOILERPLATE(debugger_iabr_match)
-DEBUGGER_BOILERPLATE(debugger_dabr_match)
-DEBUGGER_BOILERPLATE(debugger_fault_handler)
-
-#else
-static inline int debugger(struct pt_regs *regs) { return 0; }
-static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
-static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
-static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
-static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
-static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
-static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
-#endif
-
-extern int set_dabr(unsigned long dabr);
-extern void print_backtrace(unsigned long *);
-extern void show_regs(struct pt_regs * regs);
-extern void flush_instruction_cache(void);
-extern void hard_reset_now(void);
-extern void poweroff_now(void);
-
-#ifdef CONFIG_6xx
-extern long _get_L2CR(void);
-extern long _get_L3CR(void);
-extern void _set_L2CR(unsigned long);
-extern void _set_L3CR(unsigned long);
-#else
-#define _get_L2CR()	0L
-#define _get_L3CR()	0L
-#define _set_L2CR(val)	do { } while(0)
-#define _set_L3CR(val)	do { } while(0)
-#endif
-
-extern void via_cuda_init(void);
-extern void read_rtc_time(void);
-extern void pmac_find_display(void);
-extern void giveup_fpu(struct task_struct *);
-extern void disable_kernel_fp(void);
-extern void enable_kernel_fp(void);
-extern void flush_fp_to_thread(struct task_struct *);
-extern void enable_kernel_altivec(void);
-extern void giveup_altivec(struct task_struct *);
-extern void load_up_altivec(struct task_struct *);
-extern int emulate_altivec(struct pt_regs *);
-extern void __giveup_vsx(struct task_struct *);
-extern void giveup_vsx(struct task_struct *);
-extern void enable_kernel_spe(void);
-extern void giveup_spe(struct task_struct *);
-extern void load_up_spe(struct task_struct *);
-extern int fix_alignment(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
-extern void cvt_df(double *from, float *to, struct thread_struct *thread);
-
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ALTIVEC
-extern void flush_altivec_to_thread(struct task_struct *);
-#else
-static inline void flush_altivec_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_VSX
-extern void flush_vsx_to_thread(struct task_struct *);
-#else
-static inline void flush_vsx_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_SPE
-extern void flush_spe_to_thread(struct task_struct *);
-#else
-static inline void flush_spe_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-extern int call_rtas(const char *, int, int, unsigned long *, ...);
-extern void cacheable_memzero(void *p, unsigned int nb);
-extern void *cacheable_memcpy(void *, const void *, unsigned int);
-extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
-extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
-extern void _exception(int, struct pt_regs *, int, unsigned long);
-extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
-struct device_node;
-extern void note_scsi_host(struct device_node *, void *);
-
-extern struct task_struct *__switch_to(struct task_struct *,
-	struct task_struct *);
-#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
-
-struct thread_struct;
-extern struct task_struct *_switch(struct thread_struct *prev,
-				   struct thread_struct *next);
-
-extern unsigned int rtas_data;
-extern int mem_init_done;	/* set on boot once kmalloc can be called */
-extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
-extern unsigned long klimit;
-
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
-extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
-
-extern int powersave_nap;	/* set if nap mode can be used in idle loop */
-
-/*
- * Atomic exchange
- *
- * Changes the memory location '*ptr' to be val and returns
- * the previous value stored there.
- */
-static __always_inline unsigned long
-__xchg_u32(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%3,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-
-/*
- * Atomic exchange
- *
- * Changes the memory location '*ptr' to be val and returns
- * the previous value stored there.
- */
-static __always_inline unsigned long
-__xchg_u32_local(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-"1:	lwarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%3,0,%2 \n\
-	bne-	1b"
-	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-
-#ifdef CONFIG_PPC64
-static __always_inline unsigned long
-__xchg_u64(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stdcx.	%3,0,%2 \n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-
-static __always_inline unsigned long
-__xchg_u64_local(volatile void *p, unsigned long val)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__(
-"1:	ldarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stdcx.	%3,0,%2 \n\
-	bne-	1b"
-	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
-	: "r" (p), "r" (val)
-	: "cc", "memory");
-
-	return prev;
-}
-#endif
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid xchg().
- */
-extern void __xchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-__xchg(volatile void *ptr, unsigned long x, unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __xchg_u32(ptr, x);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __xchg_u64(ptr, x);
-#endif
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-static __always_inline unsigned long
-__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __xchg_u32_local(ptr, x);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __xchg_u64_local(ptr, x);
-#endif
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-#define xchg(ptr,x)							     \
-  ({									     \
-     __typeof__(*(ptr)) _x_ = (x);					     \
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
-  })
-
-#define xchg_local(ptr,x)						     \
-  ({									     \
-     __typeof__(*(ptr)) _x_ = (x);					     \
-     (__typeof__(*(ptr))) __xchg_local((ptr),				     \
-     		(unsigned long)_x_, sizeof(*(ptr))); 			     \
-  })
-
-/*
- * Compare and exchange - if *p == old, set it to new,
- * and return the old value of *p.
- */
-#define __HAVE_ARCH_CMPXCHG	1
-
-static __always_inline unsigned long
-__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
-{
-	unsigned int prev;
-
-	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
-"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
-	cmpw	0,%0,%3\n\
-	bne-	2f\n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%4,0,%2\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-
-static __always_inline unsigned long
-__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
-			unsigned long new)
-{
-	unsigned int prev;
-
-	__asm__ __volatile__ (
-"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
-	cmpw	0,%0,%3\n\
-	bne-	2f\n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%4,0,%2\n\
-	bne-	1b"
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-
-#ifdef CONFIG_PPC64
-static __always_inline unsigned long
-__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
-"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
-	cmpd	0,%0,%3\n\
-	bne-	2f\n\
-	stdcx.	%4,0,%2\n\
-	bne-	1b"
-	ISYNC_ON_SMP
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-
-static __always_inline unsigned long
-__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
-			unsigned long new)
-{
-	unsigned long prev;
-
-	__asm__ __volatile__ (
-"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
-	cmpd	0,%0,%3\n\
-	bne-	2f\n\
-	stdcx.	%4,0,%2\n\
-	bne-	1b"
-	"\n\
-2:"
-	: "=&r" (prev), "+m" (*p)
-	: "r" (p), "r" (old), "r" (new)
-	: "cc", "memory");
-
-	return prev;
-}
-#endif
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
-	  unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32(ptr, old, new);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __cmpxchg_u64(ptr, old, new);
-#endif
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-static __always_inline unsigned long
-__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
-	  unsigned int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32_local(ptr, old, new);
-#ifdef CONFIG_PPC64
-	case 8:
-		return __cmpxchg_u64_local(ptr, old, new);
-#endif
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#define cmpxchg(ptr, o, n)						 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-
-#define cmpxchg_local(ptr, o, n)					 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-#ifdef CONFIG_PPC64
-/*
- * We handle most unaligned accesses in hardware. On the other hand 
- * unaligned DMA can be very expensive on some ppc64 IO chips (it does
- * powers of 2 writes until it reaches sufficient alignment).
- *
- * Based on this we disable the IP header alignment in network drivers.
- * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
- * cacheline alignment of buffers.
- */
-#define NET_IP_ALIGN	0
-#define NET_SKB_PAD	L1_CACHE_BYTES
-
-#define cmpxchg64(ptr, o, n)						\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-  })
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-#else
-#include <asm-generic/cmpxchg-local.h>
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-#endif
-
-#define arch_align_stack(x) (x)
-
-/* Used in very early kernel initialization. */
-extern unsigned long reloc_offset(void);
-extern unsigned long add_reloc_offset(unsigned long);
-extern void reloc_got2(unsigned long);
-
-#define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_system_vtime(struct task_struct *);
-#endif
-
-extern struct dentry *powerpc_debugfs_root;
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/include/asm-powerpc/tce.h b/include/asm-powerpc/tce.h
deleted file mode 100644
index f663634cccc9..000000000000
--- a/include/asm-powerpc/tce.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * Rewrite, cleanup:
- * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_TCE_H
-#define _ASM_POWERPC_TCE_H
-#ifdef __KERNEL__
-
-#include <asm/iommu.h>
-
-/*
- * Tces come in two formats, one for the virtual bus and a different
- * format for PCI
- */
-#define TCE_VB  0
-#define TCE_PCI 1
-
-/* TCE page size is 4096 bytes (1 << 12) */
-
-#define TCE_SHIFT	12
-#define TCE_PAGE_SIZE	(1 << TCE_SHIFT)
-
-#define TCE_ENTRY_SIZE		8		/* each TCE is 64 bits */
-
-#define TCE_RPN_MASK		0xfffffffffful  /* 40-bit RPN (4K pages) */
-#define TCE_RPN_SHIFT		12
-#define TCE_VALID		0x800		/* TCE valid */
-#define TCE_ALLIO		0x400		/* TCE valid for all lpars */
-#define TCE_PCI_WRITE		0x2		/* write from PCI allowed */
-#define TCE_PCI_READ		0x1		/* read from PCI allowed */
-#define TCE_VB_WRITE		0x1		/* write from VB allowed */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_TCE_H */
diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h
deleted file mode 100644
index 6698188ca550..000000000000
--- a/include/asm-powerpc/termbits.h
+++ /dev/null
@@ -1,209 +0,0 @@
-#ifndef _ASM_POWERPC_TERMBITS_H
-#define _ASM_POWERPC_TERMBITS_H
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-/*
- * termios type and macro definitions.  Be careful about adding stuff
- * to this file since it's used in GNU libc and there are strict rules
- * concerning namespace pollution.
- */
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t c_line;			/* line discipline (== c_cc[19]) */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* For PowerPC the termios and ktermios are the same */
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t c_line;			/* line discipline (== c_cc[19]) */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 	         0
-#define VQUIT 	         1
-#define VERASE 	         2
-#define VKILL	         3
-#define VEOF	         4
-#define VMIN	         5
-#define VEOL	         6
-#define VTIME	         7
-#define VEOL2	         8
-#define VSWTC	         9
-#define VWERASE 	10
-#define VREPRINT	11
-#define VSUSP 		12
-#define VSTART		13
-#define VSTOP		14
-#define VLNEXT		15
-#define VDISCARD	16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IXON	0001000
-#define IXOFF	0002000
-#define IXANY	0004000
-#define IUCLC	0010000
-#define IMAXBEL	0020000
-#define	IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define ONLCR	0000002
-#define OLCUC	0000004
-
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-
-#define OFILL	00000100
-#define OFDEL	00000200
-#define NLDLY	00001400
-#define   NL0	00000000
-#define   NL1	00000400
-#define   NL2	00001000
-#define   NL3	00001400
-#define TABDLY	00006000
-#define   TAB0	00000000
-#define   TAB1	00002000
-#define   TAB2	00004000
-#define   TAB3	00006000
-#define   XTABS	00006000	/* required by POSIX to == TAB3 */
-#define CRDLY	00030000
-#define   CR0	00000000
-#define   CR1	00010000
-#define   CR2	00020000
-#define   CR3	00030000
-#define FFDLY	00040000
-#define   FF0	00000000
-#define   FF1	00040000
-#define BSDLY	00100000
-#define   BS0	00000000
-#define   BS1	00100000
-#define VTDLY	00200000
-#define   VT0	00000000
-#define   VT1	00200000
-
-/* c_cflag bit meaning */
-#define CBAUD	0000377
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define  EXTA   B19200
-#define  EXTB   B38400
-#define  CBAUDEX 0000000
-#define  B57600   00020
-#define  B115200  00021
-#define  B230400  00022
-#define  B460800  00023
-#define  B500000  00024
-#define  B576000  00025
-#define  B921600  00026
-#define B1000000  00027
-#define B1152000  00030
-#define B1500000  00031
-#define B2000000  00032
-#define B2500000  00033
-#define B3000000  00034
-#define B3500000  00035
-#define B4000000  00036
-#define   BOTHER  00037
-
-#define CIBAUD	077600000
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-#define CSIZE	00001400
-#define   CS5	00000000
-#define   CS6	00000400
-#define   CS7	00001000
-#define   CS8	00001400
-
-#define CSTOPB	00002000
-#define CREAD	00004000
-#define PARENB	00010000
-#define PARODD	00020000
-#define HUPCL	00040000
-
-#define CLOCAL	00100000
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-/* c_lflag bits */
-#define ISIG	0x00000080
-#define ICANON	0x00000100
-#define XCASE	0x00004000
-#define ECHO	0x00000008
-#define ECHOE	0x00000002
-#define ECHOK	0x00000004
-#define ECHONL	0x00000010
-#define NOFLSH	0x80000000
-#define TOSTOP	0x00400000
-#define ECHOCTL	0x00000040
-#define ECHOPRT	0x00000020
-#define ECHOKE	0x00000001
-#define FLUSHO	0x00800000
-#define PENDIN	0x20000000
-#define IEXTEN	0x00000400
-
-/* Values for the ACTION argument to `tcflow'.  */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif	/* _ASM_POWERPC_TERMBITS_H */
diff --git a/include/asm-powerpc/termios.h b/include/asm-powerpc/termios.h
deleted file mode 100644
index 2c14fea07c8a..000000000000
--- a/include/asm-powerpc/termios.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef _ASM_POWERPC_TERMIOS_H
-#define _ASM_POWERPC_TERMIOS_H
-
-/*
- * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
- * fields have been reordered so that termio & termios share the
- * common subset in the same order (for brain dead programs that don't
- * know or care about the differences).
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/ioctls.h>
-#include <asm/termbits.h>
-
-struct sgttyb {
-	char	sg_ispeed;
-	char	sg_ospeed;
-	char	sg_erase;
-	char	sg_kill;
-	short	sg_flags;
-};
-
-struct tchars {
-	char	t_intrc;
-	char	t_quitc;
-	char	t_startc;
-	char	t_stopc;
-	char	t_eofc;
-	char	t_brkc;
-};
-
-struct ltchars {
-	char	t_suspc;
-	char	t_dsuspc;
-	char	t_rprntc;
-	char	t_flushc;
-	char	t_werasc;
-	char	t_lnextc;
-};
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 10
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* c_cc characters */
-#define _VINTR	0
-#define _VQUIT	1
-#define _VERASE	2
-#define _VKILL	3
-#define _VEOF	4
-#define _VMIN	5
-#define _VEOL	6
-#define _VTIME	7
-#define _VEOL2	8
-#define _VSWTC	9
-
-#ifdef __KERNEL__
-/*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
-#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" 
-#endif
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios.h>
-
-#endif	/* __KERNEL__ */
-
-#endif	/* _ASM_POWERPC_TERMIOS_H */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
deleted file mode 100644
index b705c2a7651a..000000000000
--- a/include/asm-powerpc/thread_info.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* thread_info.h: PowerPC low-level thread information
- * adapted from the i386 version by Paul Mackerras
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_POWERPC_THREAD_INFO_H
-#define _ASM_POWERPC_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-/* We have 8k stacks on ppc32 and 16k on ppc64 */
-
-#ifdef CONFIG_PPC64
-#define THREAD_SHIFT		14
-#else
-#define THREAD_SHIFT		13
-#endif
-
-#define THREAD_SIZE		(1 << THREAD_SHIFT)
-
-#ifndef __ASSEMBLY__
-#include <linux/cache.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <linux/stringify.h>
-
-/*
- * low level task data.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	struct exec_domain *exec_domain;	/* execution domain */
-	int		cpu;			/* cpu we're on */
-	int		preempt_count;		/* 0 => preemptable,
-						   <0 => BUG */
-	struct restart_block restart_block;
-	unsigned long	local_flags;		/* private flags for thread */
-
-	/* low level flags - has atomic operations done on it */
-	unsigned long	flags ____cacheline_aligned_in_smp;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task =		&tsk,			\
-	.exec_domain =	&default_exec_domain,	\
-	.cpu =		0,			\
-	.preempt_count = 1,			\
-	.restart_block = {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-	.flags =	0,			\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* thread information allocation */
-
-#if THREAD_SHIFT >= PAGE_SHIFT
-
-#define THREAD_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk)	\
-	((struct thread_info *)__get_free_pages(GFP_KERNEL | \
-		__GFP_ZERO, THREAD_ORDER))
-#else
-#define alloc_thread_info(tsk)	\
-	((struct thread_info *)__get_free_pages(GFP_KERNEL, THREAD_ORDER))
-#endif
-#define free_thread_info(ti)	free_pages((unsigned long)ti, THREAD_ORDER)
-
-#else /* THREAD_SHIFT < PAGE_SHIFT */
-
-extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
-extern void free_thread_info(struct thread_info *ti);
-
-#endif /* THREAD_SHIFT < PAGE_SHIFT */
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	register unsigned long sp asm("r1");
-
-	/* gcc4, at least, is smart enough to turn this into a single
-	 * rlwinm for ppc32 and clrrdi for ppc64 */
-	return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define PREEMPT_ACTIVE		0x10000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_32BIT		4	/* 32 bit binary */
-#define TIF_PERFMON_WORK	5	/* work for pfm_handle_work() */
-#define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
-#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
-#define TIF_SINGLESTEP		8	/* singlestepping active */
-#define TIF_MEMDIE		9
-#define TIF_SECCOMP		10	/* secure computing */
-#define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
-#define TIF_NOERROR		12	/* Force successful syscall return */
-#define TIF_FREEZE		14	/* Freezing for suspend */
-#define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
-#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_32BIT		(1<<TIF_32BIT)
-#define _TIF_PERFMON_WORK	(1<<TIF_PERFMON_WORK)
-#define _TIF_PERFMON_CTXSW	(1<<TIF_PERFMON_CTXSW)
-#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
-#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
-#define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
-#define _TIF_NOERROR		(1<<TIF_NOERROR)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
-#define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
-#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
-#define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
-
-#define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
-#define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
-
-/* Bits in local_flags */
-/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
-#define TLF_NAPPING		0	/* idle thread enabled NAP mode */
-#define TLF_SLEEPING		1	/* suspend code enabled SLEEP mode */
-#define TLF_RESTORE_SIGMASK	2	/* Restore signal mask in do_signal */
-
-#define _TLF_NAPPING		(1 << TLF_NAPPING)
-#define _TLF_SLEEPING		(1 << TLF_SLEEPING)
-#define _TLF_RESTORE_SIGMASK	(1 << TLF_RESTORE_SIGMASK)
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK	1
-static inline void set_restore_sigmask(void)
-{
-	struct thread_info *ti = current_thread_info();
-	ti->local_flags |= _TLF_RESTORE_SIGMASK;
-	set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif	/* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
deleted file mode 100644
index febd581ec9b0..000000000000
--- a/include/asm-powerpc/time.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Common time prototypes and such for all ppc machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __POWERPC_TIME_H
-#define __POWERPC_TIME_H
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#include <linux/percpu.h>
-
-#include <asm/processor.h>
-#ifdef CONFIG_PPC_ISERIES
-#include <asm/paca.h>
-#include <asm/firmware.h>
-#include <asm/iseries/hv_call.h>
-#endif
-
-/* time.c */
-extern unsigned long tb_ticks_per_jiffy;
-extern unsigned long tb_ticks_per_usec;
-extern unsigned long tb_ticks_per_sec;
-extern u64 tb_to_xs;
-extern unsigned      tb_to_us;
-
-struct rtc_time;
-extern void to_tm(int tim, struct rtc_time * tm);
-extern void GregorianDay(struct rtc_time *tm);
-extern time_t last_rtc_update;
-
-extern void generic_calibrate_decr(void);
-extern void wakeup_decrementer(void);
-extern void snapshot_timebase(void);
-
-extern void set_dec_cpu6(unsigned int val);
-
-/* Some sane defaults: 125 MHz timebase, 1GHz processor */
-extern unsigned long ppc_proc_freq;
-#define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
-extern unsigned long ppc_tb_freq;
-#define DEFAULT_TB_FREQ		125000000UL
-
-/*
- * By putting all of this stuff into a single struct we 
- * reduce the number of cache lines touched by do_gettimeofday.
- * Both by collecting all of the data in one cache line and
- * by touching only one TOC entry on ppc64.
- */
-struct gettimeofday_vars {
-	u64 tb_to_xs;
-	u64 stamp_xsec;
-	u64 tb_orig_stamp;
-};
-
-struct gettimeofday_struct {
-	unsigned long tb_ticks_per_sec;
-	struct gettimeofday_vars vars[2];
-	struct gettimeofday_vars * volatile varp;
-	unsigned      var_idx;
-	unsigned      tb_to_us;
-};
-
-struct div_result {
-	u64 result_high;
-	u64 result_low;
-};
-
-/* Accessor functions for the timebase (RTC on 601) registers. */
-/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
-#ifdef CONFIG_6xx
-#define __USE_RTC()	(!cpu_has_feature(CPU_FTR_USE_TB))
-#else
-#define __USE_RTC()	0
-#endif
-
-#ifdef CONFIG_PPC64
-
-/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */
-#define get_tbl		get_tb
-
-#else
-
-static inline unsigned long get_tbl(void)
-{
-#if defined(CONFIG_403GCX)
-	unsigned long tbl;
-	asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
-	return tbl;
-#else
-	return mftbl();
-#endif
-}
-
-static inline unsigned int get_tbu(void)
-{
-#ifdef CONFIG_403GCX
-	unsigned int tbu;
-	asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
-	return tbu;
-#else
-	return mftbu();
-#endif
-}
-#endif /* !CONFIG_PPC64 */
-
-static inline unsigned int get_rtcl(void)
-{
-	unsigned int rtcl;
-
-	asm volatile("mfrtcl %0" : "=r" (rtcl));
-	return rtcl;
-}
-
-static inline u64 get_rtc(void)
-{
-	unsigned int hi, lo, hi2;
-
-	do {
-		asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2"
-			     : "=r" (hi), "=r" (lo), "=r" (hi2));
-	} while (hi2 != hi);
-	return (u64)hi * 1000000000 + lo;
-}
-
-#ifdef CONFIG_PPC64
-static inline u64 get_tb(void)
-{
-	return mftb();
-}
-#else /* CONFIG_PPC64 */
-static inline u64 get_tb(void)
-{
-	unsigned int tbhi, tblo, tbhi2;
-
-	do {
-		tbhi = get_tbu();
-		tblo = get_tbl();
-		tbhi2 = get_tbu();
-	} while (tbhi != tbhi2);
-
-	return ((u64)tbhi << 32) | tblo;
-}
-#endif /* !CONFIG_PPC64 */
-
-static inline u64 get_tb_or_rtc(void)
-{
-	return __USE_RTC() ? get_rtc() : get_tb();
-}
-
-static inline void set_tb(unsigned int upper, unsigned int lower)
-{
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, upper);
-	mtspr(SPRN_TBWL, lower);
-}
-
-/* Accessor functions for the decrementer register.
- * The 4xx doesn't even have a decrementer.  I tried to use the
- * generic timer interrupt code, which seems OK, with the 4xx PIT
- * in auto-reload mode.  The problem is PIT stops counting when it
- * hits zero.  If it would wrap, we could use it just like a decrementer.
- */
-static inline unsigned int get_dec(void)
-{
-#if defined(CONFIG_40x)
-	return (mfspr(SPRN_PIT));
-#else
-	return (mfspr(SPRN_DEC));
-#endif
-}
-
-/*
- * Note: Book E and 4xx processors differ from other PowerPC processors
- * in when the decrementer generates its interrupt: on the 1 to 0
- * transition for Book E/4xx, but on the 0 to -1 transition for others.
- */
-static inline void set_dec(int val)
-{
-#if defined(CONFIG_40x)
-	mtspr(SPRN_PIT, val);
-#elif defined(CONFIG_8xx_CPU6)
-	set_dec_cpu6(val - 1);
-#else
-#ifndef CONFIG_BOOKE
-	--val;
-#endif
-#ifdef CONFIG_PPC_ISERIES
-	if (firmware_has_feature(FW_FEATURE_ISERIES) &&
-			get_lppaca()->shared_proc) {
-		get_lppaca()->virtual_decr = val;
-		if (get_dec() > val)
-			HvCall_setVirtualDecr();
-		return;
-	}
-#endif
-	mtspr(SPRN_DEC, val);
-#endif /* not 40x or 8xx_CPU6 */
-}
-
-static inline unsigned long tb_ticks_since(unsigned long tstamp)
-{
-	if (__USE_RTC()) {
-		int delta = get_rtcl() - (unsigned int) tstamp;
-		return delta < 0 ? delta + 1000000000 : delta;
-	}
-	return get_tbl() - tstamp;
-}
-
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-#ifdef CONFIG_PPC64
-#define mulhdu(x,y) \
-({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-#else
-extern u64 mulhdu(u64, u64);
-#endif
-
-extern void smp_space_timers(unsigned int);
-
-extern unsigned mulhwu_scale_factor(unsigned, unsigned);
-extern void div128_by_32(u64 dividend_high, u64 dividend_low,
-			 unsigned divisor, struct div_result *dr);
-
-/* Used to store Processor Utilization register (purr) values */
-
-struct cpu_usage {
-        u64 current_tb;  /* Holds the current purr register values */
-};
-
-DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
-
-#if defined(CONFIG_VIRT_CPU_ACCOUNTING)
-extern void calculate_steal_time(void);
-extern void snapshot_timebases(void);
-#define account_process_vtime(tsk)		account_process_tick(tsk, 0)
-#else
-#define calculate_steal_time()			do { } while (0)
-#define snapshot_timebases()			do { } while (0)
-#define account_process_vtime(tsk)		do { } while (0)
-#endif
-
-extern void secondary_cpu_time_init(void);
-extern void iSeries_time_init_early(void);
-
-#endif /* __KERNEL__ */
-#endif /* __POWERPC_TIME_H */
diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h
deleted file mode 100644
index c55e14f7ef44..000000000000
--- a/include/asm-powerpc/timex.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _ASM_POWERPC_TIMEX_H
-#define _ASM_POWERPC_TIMEX_H
-
-#ifdef __KERNEL__
-
-/*
- * PowerPC architecture timex specifications
- */
-
-#include <asm/cputable.h>
-#include <asm/reg.h>
-
-#define CLOCK_TICK_RATE	1024000 /* Underlying HZ */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
-#ifdef __powerpc64__
-	return mftb();
-#else
-	cycles_t ret;
-
-	/*
-	 * For the "cycle" counter we use the timebase lower half.
-	 * Currently only used on SMP.
-	 */
-
-	ret = 0;
-
-	__asm__ __volatile__(
-		"97:	mftb %0\n"
-		"99:\n"
-		".section __ftr_fixup,\"a\"\n"
-		".align 2\n"
-		"98:\n"
-		"	.long %1\n"
-		"	.long 0\n"
-		"	.long 97b-98b\n"
-		"	.long 99b-98b\n"
-		"	.long 0\n"
-		"	.long 0\n"
-		".previous"
-		: "=r" (ret) : "i" (CPU_FTR_601));
-	return ret;
-#endif
-}
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_TIMEX_H */
diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h
deleted file mode 100644
index e20ff7541f36..000000000000
--- a/include/asm-powerpc/tlb.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *	TLB shootdown specifics for powerpc
- *
- * Copyright (C) 2002 Anton Blanchard, IBM Corp.
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_POWERPC_TLB_H
-#define _ASM_POWERPC_TLB_H
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <asm/pgtable.h>
-#endif
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#ifndef __powerpc64__
-#include <asm/page.h>
-#include <asm/mmu.h>
-#endif
-
-#include <linux/pagemap.h>
-
-struct mmu_gather;
-
-#define tlb_start_vma(tlb, vma)	do { } while (0)
-#define tlb_end_vma(tlb, vma)	do { } while (0)
-
-#if !defined(CONFIG_PPC_STD_MMU)
-
-#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
-
-#elif defined(__powerpc64__)
-
-extern void pte_free_finish(void);
-
-static inline void tlb_flush(struct mmu_gather *tlb)
-{
-	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
-
-	/* If there's a TLB batch pending, then we must flush it because the
-	 * pages are going to be freed and we really don't want to have a CPU
-	 * access a freed page because it has a stale TLB
-	 */
-	if (tlbbatch->index)
-		__flush_tlb_pending(tlbbatch);
-
-	pte_free_finish();
-}
-
-#else
-
-extern void tlb_flush(struct mmu_gather *tlb);
-
-#endif
-
-/* Get the generic bits... */
-#include <asm-generic/tlb.h>
-
-#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
-
-#else
-extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
-			     unsigned long address);
-
-static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
-					unsigned long address)
-{
-	if (pte_val(*ptep) & _PAGE_HASHPTE)
-		flush_hash_entry(tlb->mm, ptep, address);
-}
-
-#endif
-#endif /* __KERNEL__ */
-#endif /* __ASM_POWERPC_TLB_H */
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
deleted file mode 100644
index 5c9108147644..000000000000
--- a/include/asm-powerpc/tlbflush.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _ASM_POWERPC_TLBFLUSH_H
-#define _ASM_POWERPC_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#ifdef __KERNEL__
-
-#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
-/*
- * TLB flushing for software loaded TLB chips
- *
- * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
- * flush_tlb_kernel_range are best implemented as tlbia vs
- * specific tlbie's
- */
-
-#include <linux/mm.h>
-
-extern void _tlbie(unsigned long address, unsigned int pid);
-
-#if defined(CONFIG_40x) || defined(CONFIG_8xx)
-#define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
-#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
-extern void _tlbia(void);
-#endif
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	_tlbia();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-				  unsigned long vmaddr)
-{
-	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
-}
-
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
-					 unsigned long vmaddr)
-{
-	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	_tlbia();
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-	_tlbia();
-}
-
-#elif defined(CONFIG_PPC32)
-/*
- * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
- */
-extern void _tlbie(unsigned long address);
-extern void _tlbia(void);
-
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
-extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-			    unsigned long end);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-
-#else
-/*
- * TLB flushing for 64-bit has-MMU CPUs
- */
-
-#include <linux/percpu.h>
-#include <asm/page.h>
-
-#define PPC64_TLB_BATCH_NR 192
-
-struct ppc64_tlb_batch {
-	int			active;
-	unsigned long		index;
-	struct mm_struct	*mm;
-	real_pte_t		pte[PPC64_TLB_BATCH_NR];
-	unsigned long		vaddr[PPC64_TLB_BATCH_NR];
-	unsigned int		psize;
-	int			ssize;
-};
-DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
-
-extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
-
-extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
-			    pte_t *ptep, unsigned long pte, int huge);
-
-#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
-
-static inline void arch_enter_lazy_mmu_mode(void)
-{
-	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-	batch->active = 1;
-}
-
-static inline void arch_leave_lazy_mmu_mode(void)
-{
-	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-
-	if (batch->index)
-		__flush_tlb_pending(batch);
-	batch->active = 0;
-}
-
-#define arch_flush_lazy_mmu_mode()      do {} while (0)
-
-
-extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
-			    int ssize, int local);
-extern void flush_hash_range(unsigned long number, int local);
-
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-				  unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
-					 unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-}
-
-/* Private function for use by PCI IO mapping code */
-extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
-				     unsigned long end);
-
-
-#endif
-
-/*
- * This gets called at the end of handling a page fault, when
- * the kernel has put a new PTE into the page table for the process.
- * We use it to ensure coherency between the i-cache and d-cache
- * for the page which has just been mapped in.
- * On machines which use an MMU hash table, we use this to put a
- * corresponding HPTE into the hash table ahead of time, instead of
- * waiting for the inevitable extra hash-table miss exception.
- */
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-
-#endif /*__KERNEL__ */
-#endif /* _ASM_POWERPC_TLBFLUSH_H */
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
deleted file mode 100644
index 100c6fbfc587..000000000000
--- a/include/asm-powerpc/topology.h
+++ /dev/null
@@ -1,115 +0,0 @@
-#ifndef _ASM_POWERPC_TOPOLOGY_H
-#define _ASM_POWERPC_TOPOLOGY_H
-#ifdef __KERNEL__
-
-
-struct sys_device;
-struct device_node;
-
-#ifdef CONFIG_NUMA
-
-#include <asm/mmzone.h>
-
-static inline int cpu_to_node(int cpu)
-{
-	return numa_cpu_lookup_table[cpu];
-}
-
-#define parent_node(node)	(node)
-
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return numa_cpumask_lookup_table[node];
-}
-
-static inline int node_to_first_cpu(int node)
-{
-	cpumask_t tmp;
-	tmp = node_to_cpumask(node);
-	return first_cpu(tmp);
-}
-
-int of_node_to_nid(struct device_node *device);
-
-struct pci_bus;
-#ifdef CONFIG_PCI
-extern int pcibus_to_node(struct pci_bus *bus);
-#else
-static inline int pcibus_to_node(struct pci_bus *bus)
-{
-	return -1;
-}
-#endif
-
-#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)) \
-				)
-
-/* sched_domains SD_NODE_INIT for PPC64 machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.span			= CPU_MASK_NONE,	\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 1,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_NEWIDLE	\
-				| SD_WAKE_IDLE		\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
-}
-
-extern void __init dump_numa_cpu_topology(void);
-
-extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
-extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
-
-#else
-
-static inline int of_node_to_nid(struct device_node *device)
-{
-	return 0;
-}
-
-static inline void dump_numa_cpu_topology(void) {}
-
-static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_device_from_node(struct sys_device *dev,
-						int nid)
-{
-}
-
-#endif /* CONFIG_NUMA */
-
-#include <asm-generic/topology.h>
-
-#ifdef CONFIG_SMP
-#include <asm/cputable.h>
-#define smt_capable()		(cpu_has_feature(CPU_FTR_SMT))
-
-#ifdef CONFIG_PPC64
-#include <asm/smp.h>
-
-#define topology_thread_siblings(cpu)	(per_cpu(cpu_sibling_map, cpu))
-#endif
-#endif
-
-#endif /* __KERNEL__ */
-#endif	/* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
deleted file mode 100644
index f8b60793b7a9..000000000000
--- a/include/asm-powerpc/tsi108.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * common routine and memory layout for Tundra TSI108(Grendel) host bridge
- * memory controller.
- *
- * Author: Jacob Pan (jacob.pan@freescale.com)
- *	   Alex Bounine (alexandreb@tundra.com)
- *
- * Copyright 2004-2006 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __PPC_KERNEL_TSI108_H
-#define __PPC_KERNEL_TSI108_H
-
-#include <asm/pci-bridge.h>
-
-/* Size of entire register space */
-#define TSI108_REG_SIZE		(0x10000)
-
-/* Sizes of register spaces for individual blocks */
-#define TSI108_HLP_SIZE		0x1000
-#define TSI108_PCI_SIZE		0x1000
-#define TSI108_CLK_SIZE		0x1000
-#define TSI108_PB_SIZE		0x1000
-#define TSI108_SD_SIZE		0x1000
-#define TSI108_DMA_SIZE		0x1000
-#define TSI108_ETH_SIZE		0x1000
-#define TSI108_I2C_SIZE		0x400
-#define TSI108_MPIC_SIZE	0x400
-#define TSI108_UART0_SIZE	0x200
-#define TSI108_GPIO_SIZE	0x200
-#define TSI108_UART1_SIZE	0x200
-
-/* Offsets within Tsi108(A) CSR space for individual blocks */
-#define TSI108_HLP_OFFSET	0x0000
-#define TSI108_PCI_OFFSET	0x1000
-#define TSI108_CLK_OFFSET	0x2000
-#define TSI108_PB_OFFSET	0x3000
-#define TSI108_SD_OFFSET	0x4000
-#define TSI108_DMA_OFFSET	0x5000
-#define TSI108_ETH_OFFSET	0x6000
-#define TSI108_I2C_OFFSET	0x7000
-#define TSI108_MPIC_OFFSET	0x7400
-#define TSI108_UART0_OFFSET	0x7800
-#define TSI108_GPIO_OFFSET	0x7A00
-#define TSI108_UART1_OFFSET	0x7C00
-
-/* Tsi108 registers used by common code components */
-#define TSI108_PCI_CSR		(0x004)
-#define TSI108_PCI_IRP_CFG_CTL	(0x180)
-#define TSI108_PCI_IRP_STAT	(0x184)
-#define TSI108_PCI_IRP_ENABLE	(0x188)
-#define TSI108_PCI_IRP_INTAD	(0x18C)
-
-#define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
-#define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
-
-#define TSI108_CG_PWRUP_STATUS	(0x234)
-
-#define TSI108_PB_ISR		(0x00C)
-#define TSI108_PB_ERRCS		(0x404)
-#define TSI108_PB_AERR		(0x408)
-
-#define TSI108_PB_ERRCS_ES		(1 << 1)
-#define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
-
-#define TSI108_PCI_CFG_SIZE		(0x01000000)
-
-/*
- * PHY Configuration Options
- *
- * Specify "bcm54xx" in the compatible property of your device tree phy
- * nodes if your board uses the Broadcom PHYs
- */
-#define TSI108_PHY_MV88E	0	/* Marvel 88Exxxx PHY */
-#define TSI108_PHY_BCM54XX	1	/* Broardcom BCM54xx PHY */
-
-/* Global variables */
-
-extern u32 tsi108_pci_cfg_base;
-/* Exported functions */
-
-extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
-extern unsigned long tsi108_get_mem_size(void);
-extern unsigned long tsi108_get_cpu_clk(void);
-extern unsigned long tsi108_get_sdc_clk(void);
-extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
-				      int offset, int len, u32 val);
-extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
-				     int offset, int len, u32 * val);
-extern void tsi108_clear_pci_error(u32 pci_cfg_base);
-
-extern phys_addr_t get_csrbase(void);
-
-typedef struct {
-	u32 regs;		/* hw registers base address */
-	u32 phyregs;		/* phy registers base address */
-	u16 phy;		/* phy address */
-	u16 irq_num;		/* irq number */
-	u8 mac_addr[6];		/* phy mac address */
-	u16 phy_type;	/* type of phy on board */
-} hw_info;
-
-extern u32 get_vir_csrbase(void);
-extern u32 tsi108_csr_vir_base;
-
-static inline u32 tsi108_read_reg(u32 reg_offset)
-{
-	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
-}
-
-static inline void tsi108_write_reg(u32 reg_offset, u32 val)
-{
-	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
-}
-
-#endif				/* __PPC_KERNEL_TSI108_H */
diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h
deleted file mode 100644
index 6ed93979fbe4..000000000000
--- a/include/asm-powerpc/tsi108_irq.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2005 Tundra Semiconductor Corp.
- * Alex Bounine, <alexandreb at tundra.com).
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * definitions for interrupt controller initialization and external interrupt
- * demultiplexing on TSI108EMU/SVB boards.
- */
-
-#ifndef _ASM_POWERPC_TSI108_IRQ_H
-#define _ASM_POWERPC_TSI108_IRQ_H
-
-/*
- * Tsi108 interrupts
- */
-#ifndef TSI108_IRQ_REG_BASE
-#define TSI108_IRQ_REG_BASE		0
-#endif
-
-#define TSI108_IRQ(x)		(TSI108_IRQ_REG_BASE + (x))
-
-#define TSI108_MAX_VECTORS	(36 + 4)	/* 36 sources + PCI INT demux */
-#define MAX_TASK_PRIO	0xF
-
-#define TSI108_IRQ_SPURIOUS	(TSI108_MAX_VECTORS)
-
-#define DEFAULT_PRIO_LVL	10	/* initial priority level */
-
-/* Interrupt vectors assignment to external and internal
- * sources of requests. */
-
-/* EXTERNAL INTERRUPT SOURCES */
-
-#define IRQ_TSI108_EXT_INT0	TSI108_IRQ(0)	/* External Source at INT[0] */
-#define IRQ_TSI108_EXT_INT1	TSI108_IRQ(1)	/* External Source at INT[1] */
-#define IRQ_TSI108_EXT_INT2	TSI108_IRQ(2)	/* External Source at INT[2] */
-#define IRQ_TSI108_EXT_INT3	TSI108_IRQ(3)	/* External Source at INT[3] */
-
-/* INTERNAL INTERRUPT SOURCES */
-
-#define IRQ_TSI108_RESERVED0	TSI108_IRQ(4)	/* Reserved IRQ */
-#define IRQ_TSI108_RESERVED1	TSI108_IRQ(5)	/* Reserved IRQ */
-#define IRQ_TSI108_RESERVED2	TSI108_IRQ(6)	/* Reserved IRQ */
-#define IRQ_TSI108_RESERVED3	TSI108_IRQ(7)	/* Reserved IRQ */
-#define IRQ_TSI108_DMA0		TSI108_IRQ(8)	/* DMA0 */
-#define IRQ_TSI108_DMA1		TSI108_IRQ(9)	/* DMA1 */
-#define IRQ_TSI108_DMA2		TSI108_IRQ(10)	/* DMA2 */
-#define IRQ_TSI108_DMA3		TSI108_IRQ(11)	/* DMA3 */
-#define IRQ_TSI108_UART0	TSI108_IRQ(12)	/* UART0 */
-#define IRQ_TSI108_UART1	TSI108_IRQ(13)	/* UART1 */
-#define IRQ_TSI108_I2C		TSI108_IRQ(14)	/* I2C */
-#define IRQ_TSI108_GPIO		TSI108_IRQ(15)	/* GPIO */
-#define IRQ_TSI108_GIGE0	TSI108_IRQ(16)	/* GIGE0 */
-#define IRQ_TSI108_GIGE1	TSI108_IRQ(17)	/* GIGE1 */
-#define IRQ_TSI108_RESERVED4	TSI108_IRQ(18)	/* Reserved IRQ */
-#define IRQ_TSI108_HLP		TSI108_IRQ(19)	/* HLP */
-#define IRQ_TSI108_SDRAM	TSI108_IRQ(20)	/* SDC */
-#define IRQ_TSI108_PROC_IF	TSI108_IRQ(21)	/* Processor IF */
-#define IRQ_TSI108_RESERVED5	TSI108_IRQ(22)	/* Reserved IRQ */
-#define IRQ_TSI108_PCI		TSI108_IRQ(23)	/* PCI/X block */
-
-#define IRQ_TSI108_MBOX0	TSI108_IRQ(24)	/* Mailbox 0 register */
-#define IRQ_TSI108_MBOX1	TSI108_IRQ(25)	/* Mailbox 1 register */
-#define IRQ_TSI108_MBOX2	TSI108_IRQ(26)	/* Mailbox 2 register */
-#define IRQ_TSI108_MBOX3	TSI108_IRQ(27)	/* Mailbox 3 register */
-
-#define IRQ_TSI108_DBELL0	TSI108_IRQ(28)	/* Doorbell 0 */
-#define IRQ_TSI108_DBELL1	TSI108_IRQ(29)	/* Doorbell 1 */
-#define IRQ_TSI108_DBELL2	TSI108_IRQ(30)	/* Doorbell 2 */
-#define IRQ_TSI108_DBELL3	TSI108_IRQ(31)	/* Doorbell 3 */
-
-#define IRQ_TSI108_TIMER0	TSI108_IRQ(32)	/* Global Timer 0 */
-#define IRQ_TSI108_TIMER1	TSI108_IRQ(33)	/* Global Timer 1 */
-#define IRQ_TSI108_TIMER2	TSI108_IRQ(34)	/* Global Timer 2 */
-#define IRQ_TSI108_TIMER3	TSI108_IRQ(35)	/* Global Timer 3 */
-
-/*
- * PCI bus INTA# - INTD# lines demultiplexor
- */
-#define IRQ_PCI_INTAD_BASE	TSI108_IRQ(36)
-#define IRQ_PCI_INTA		(IRQ_PCI_INTAD_BASE + 0)
-#define IRQ_PCI_INTB		(IRQ_PCI_INTAD_BASE + 1)
-#define IRQ_PCI_INTC		(IRQ_PCI_INTAD_BASE + 2)
-#define IRQ_PCI_INTD		(IRQ_PCI_INTAD_BASE + 3)
-#define NUM_PCI_IRQS		(4)
-
-/* number of entries in vector dispatch table */
-#define IRQ_TSI108_TAB_SIZE	(TSI108_MAX_VECTORS + 1)
-
-/* Mapping of MPIC outputs to processors' interrupt pins */
-
-#define IDIR_INT_OUT0		0x1
-#define IDIR_INT_OUT1		0x2
-#define IDIR_INT_OUT2		0x4
-#define IDIR_INT_OUT3		0x8
-
-/*---------------------------------------------------------------
- * IRQ line configuration parameters */
-
-/* Interrupt delivery modes */
-typedef enum {
-	TSI108_IRQ_DIRECTED,
-	TSI108_IRQ_DISTRIBUTED,
-} TSI108_IRQ_MODE;
-#endif				/*  _ASM_POWERPC_TSI108_IRQ_H */
diff --git a/include/asm-powerpc/tsi108_pci.h b/include/asm-powerpc/tsi108_pci.h
deleted file mode 100644
index 5653d7cc3e24..000000000000
--- a/include/asm-powerpc/tsi108_pci.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2007 IBM Corp
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_POWERPC_TSI108_PCI_H
-#define _ASM_POWERPC_TSI108_PCI_H
-
-#include <asm/tsi108.h>
-
-/* Register definitions */
-#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10)
-#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14)
-#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18)
-#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c)
-#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c)
-#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204)
-#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208)
-#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c)
-#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210)
-#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214)
-#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220)
-#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230)
-
-extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary);
-extern void tsi108_pci_int_init(struct device_node *node);
-extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
-extern void tsi108_clear_pci_cfg_error(void);
-
-#endif				/*  _ASM_POWERPC_TSI108_PCI_H */
diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h
deleted file mode 100644
index d3374bc865ba..000000000000
--- a/include/asm-powerpc/types.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _ASM_POWERPC_TYPES_H
-#define _ASM_POWERPC_TYPES_H
-
-#ifdef __powerpc64__
-# include <asm-generic/int-l64.h>
-#else
-# include <asm-generic/int-ll64.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __powerpc64__
-typedef unsigned int umode_t;
-#else
-typedef unsigned short umode_t;
-#endif
-
-typedef struct {
-	__u32 u[4];
-} __attribute__((aligned(16))) __vector128;
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __powerpc64__
-#define BITS_PER_LONG 64
-#else
-#define BITS_PER_LONG 32
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef __vector128 vector128;
-
-/* Physical address used by some IO functions */
-#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
-typedef u64 phys_addr_t;
-#else
-typedef u32 phys_addr_t;
-#endif
-
-#ifdef __powerpc64__
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif
-typedef u64 dma64_addr_t;
-
-typedef struct {
-	unsigned long entry;
-	unsigned long toc;
-	unsigned long env;
-} func_descr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_TYPES_H */
diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h
deleted file mode 100644
index 1a0736f8803f..000000000000
--- a/include/asm-powerpc/uaccess.h
+++ /dev/null
@@ -1,499 +0,0 @@
-#ifndef _ARCH_POWERPC_UACCESS_H
-#define _ARCH_POWERPC_UACCESS_H
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * The fs/ds values are now the highest legal address in the "segment".
- * This simplifies the checking in the routines below.
- */
-
-#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(~0UL)
-#ifdef __powerpc64__
-/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */
-#define USER_DS		MAKE_MM_SEG(TASK_SIZE_USER64 - 1)
-#else
-#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
-#endif
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(current->thread.fs)
-#define set_fs(val)	(current->thread.fs = (val))
-
-#define segment_eq(a, b)	((a).seg == (b).seg)
-
-#ifdef __powerpc64__
-/*
- * This check is sufficient because there is a large enough
- * gap between user addresses and the kernel addresses
- */
-#define __access_ok(addr, size, segment)	\
-	(((addr) <= (segment).seg) && ((size) <= (segment).seg))
-
-#else
-
-#define __access_ok(addr, size, segment)	\
-	(((addr) <= (segment).seg) &&		\
-	 (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr)))))
-
-#endif
-
-#define access_ok(type, addr, size)		\
-	(__chk_user_ptr(addr),			\
-	 __access_ok((__force unsigned long)(addr), (size), get_fs()))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-	unsigned long insn;
-	unsigned long fixup;
-};
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- *
- * As we use the same address space for kernel and user data on the
- * PowerPC, we can just do these as direct assignments.  (Of course, the
- * exception handling means that it's no longer "just"...)
- *
- * The "user64" versions of the user access functions are versions that
- * allow access of 64-bit data. The "get_user" functions do not
- * properly handle 64-bit data because the value gets down cast to a long.
- * The "put_user" functions already handle 64-bit data properly but we add
- * "user64" versions for completeness
- */
-#define get_user(x, ptr) \
-	__get_user_check((x), (ptr), sizeof(*(ptr)))
-#define put_user(x, ptr) \
-	__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user(x, ptr) \
-	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user(x, ptr) \
-	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#ifndef __powerpc64__
-#define __get_user64(x, ptr) \
-	__get_user64_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user64(x, ptr) __put_user(x, ptr)
-#endif
-
-#define __get_user_inatomic(x, ptr) \
-	__get_user_nosleep((x), (ptr), sizeof(*(ptr)))
-#define __put_user_inatomic(x, ptr) \
-	__put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-extern long __put_user_bad(void);
-
-/*
- * We don't tell gcc that we are accessing memory, but this is OK
- * because we do not write to any memory gcc knows about, so there
- * are no aliasing issues.
- */
-#define __put_user_asm(x, addr, err, op)			\
-	__asm__ __volatile__(					\
-		"1:	" op " %1,0(%2)	# put_user\n"		\
-		"2:\n"						\
-		".section .fixup,\"ax\"\n"			\
-		"3:	li %0,%3\n"				\
-		"	b 2b\n"					\
-		".previous\n"					\
-		".section __ex_table,\"a\"\n"			\
-		"	.balign %5\n"				\
-			PPC_LONG "1b,3b\n"			\
-		".previous"					\
-		: "=r" (err)					\
-		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err),\
-		  "i"(sizeof(unsigned long)))
-
-#ifdef __powerpc64__
-#define __put_user_asm2(x, ptr, retval)				\
-	  __put_user_asm(x, ptr, retval, "std")
-#else /* __powerpc64__ */
-#define __put_user_asm2(x, addr, err)				\
-	__asm__ __volatile__(					\
-		"1:	stw %1,0(%2)\n"				\
-		"2:	stw %1+1,4(%2)\n"			\
-		"3:\n"						\
-		".section .fixup,\"ax\"\n"			\
-		"4:	li %0,%3\n"				\
-		"	b 3b\n"					\
-		".previous\n"					\
-		".section __ex_table,\"a\"\n"			\
-		"	.balign %5\n"				\
-			PPC_LONG "1b,4b\n"			\
-			PPC_LONG "2b,4b\n"			\
-		".previous"					\
-		: "=r" (err)					\
-		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err),\
-		  "i"(sizeof(unsigned long)))
-#endif /* __powerpc64__ */
-
-#define __put_user_size(x, ptr, size, retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	  case 1: __put_user_asm(x, ptr, retval, "stb"); break;	\
-	  case 2: __put_user_asm(x, ptr, retval, "sth"); break;	\
-	  case 4: __put_user_asm(x, ptr, retval, "stw"); break;	\
-	  case 8: __put_user_asm2(x, ptr, retval); break;	\
-	  default: __put_user_bad();				\
-	}							\
-} while (0)
-
-#define __put_user_nocheck(x, ptr, size)			\
-({								\
-	long __pu_err;						\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (!is_kernel_addr((unsigned long)__pu_addr))		\
-		might_sleep();					\
-	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
-	__pu_err;						\
-})
-
-#define __put_user_check(x, ptr, size)					\
-({									\
-	long __pu_err = -EFAULT;					\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
-	might_sleep();							\
-	if (access_ok(VERIFY_WRITE, __pu_addr, size))			\
-		__put_user_size((x), __pu_addr, (size), __pu_err);	\
-	__pu_err;							\
-})
-
-#define __put_user_nosleep(x, ptr, size)			\
-({								\
-	long __pu_err;						\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
-	__pu_err;						\
-})
-
-
-extern long __get_user_bad(void);
-
-#define __get_user_asm(x, addr, err, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %1,0(%2)	# get_user\n"	\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,%3\n"			\
-		"	li %1,0\n"			\
-		"	b 2b\n"				\
-		".previous\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.balign %5\n"			\
-			PPC_LONG "1b,3b\n"		\
-		".previous"				\
-		: "=r" (err), "=r" (x)			\
-		: "b" (addr), "i" (-EFAULT), "0" (err),	\
-		  "i"(sizeof(unsigned long)))
-
-#ifdef __powerpc64__
-#define __get_user_asm2(x, addr, err)			\
-	__get_user_asm(x, addr, err, "ld")
-#else /* __powerpc64__ */
-#define __get_user_asm2(x, addr, err)			\
-	__asm__ __volatile__(				\
-		"1:	lwz %1,0(%2)\n"			\
-		"2:	lwz %1+1,4(%2)\n"		\
-		"3:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"4:	li %0,%3\n"			\
-		"	li %1,0\n"			\
-		"	li %1+1,0\n"			\
-		"	b 3b\n"				\
-		".previous\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.balign %5\n"			\
-			PPC_LONG "1b,4b\n"		\
-			PPC_LONG "2b,4b\n"		\
-		".previous"				\
-		: "=r" (err), "=&r" (x)			\
-		: "b" (addr), "i" (-EFAULT), "0" (err),	\
-		  "i"(sizeof(unsigned long)))
-#endif /* __powerpc64__ */
-
-#define __get_user_size(x, ptr, size, retval)			\
-do {								\
-	retval = 0;						\
-	__chk_user_ptr(ptr);					\
-	if (size > sizeof(x))					\
-		(x) = __get_user_bad();				\
-	switch (size) {						\
-	case 1: __get_user_asm(x, ptr, retval, "lbz"); break;	\
-	case 2: __get_user_asm(x, ptr, retval, "lhz"); break;	\
-	case 4: __get_user_asm(x, ptr, retval, "lwz"); break;	\
-	case 8: __get_user_asm2(x, ptr, retval);  break;	\
-	default: (x) = __get_user_bad();			\
-	}							\
-} while (0)
-
-#define __get_user_nocheck(x, ptr, size)			\
-({								\
-	long __gu_err;						\
-	unsigned long __gu_val;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
-	if (!is_kernel_addr((unsigned long)__gu_addr))		\
-		might_sleep();					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#ifndef __powerpc64__
-#define __get_user64_nocheck(x, ptr, size)			\
-({								\
-	long __gu_err;						\
-	long long __gu_val;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
-	if (!is_kernel_addr((unsigned long)__gu_addr))		\
-		might_sleep();					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-#endif /* __powerpc64__ */
-
-#define __get_user_check(x, ptr, size)					\
-({									\
-	long __gu_err = -EFAULT;					\
-	unsigned long  __gu_val = 0;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
-	might_sleep();							\
-	if (access_ok(VERIFY_READ, __gu_addr, (size)))			\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-	__gu_err;							\
-})
-
-#define __get_user_nosleep(x, ptr, size)			\
-({								\
-	long __gu_err;						\
-	unsigned long __gu_val;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-
-/* more complex routines */
-
-extern unsigned long __copy_tofrom_user(void __user *to,
-		const void __user *from, unsigned long size);
-
-#ifndef __powerpc64__
-
-static inline unsigned long copy_from_user(void *to,
-		const void __user *from, unsigned long n)
-{
-	unsigned long over;
-
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_tofrom_user((__force void __user *)to, from, n);
-	if ((unsigned long)from < TASK_SIZE) {
-		over = (unsigned long)from + n - TASK_SIZE;
-		return __copy_tofrom_user((__force void __user *)to, from,
-				n - over) + over;
-	}
-	return n;
-}
-
-static inline unsigned long copy_to_user(void __user *to,
-		const void *from, unsigned long n)
-{
-	unsigned long over;
-
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __copy_tofrom_user(to, (__force void __user *)from, n);
-	if ((unsigned long)to < TASK_SIZE) {
-		over = (unsigned long)to + n - TASK_SIZE;
-		return __copy_tofrom_user(to, (__force void __user *)from,
-				n - over) + over;
-	}
-	return n;
-}
-
-#else /* __powerpc64__ */
-
-#define __copy_in_user(to, from, size) \
-	__copy_tofrom_user((to), (from), (size))
-
-extern unsigned long copy_from_user(void *to, const void __user *from,
-				    unsigned long n);
-extern unsigned long copy_to_user(void __user *to, const void *from,
-				  unsigned long n);
-extern unsigned long copy_in_user(void __user *to, const void __user *from,
-				  unsigned long n);
-
-#endif /* __powerpc64__ */
-
-static inline unsigned long __copy_from_user_inatomic(void *to,
-		const void __user *from, unsigned long n)
-{
-	if (__builtin_constant_p(n) && (n <= 8)) {
-		unsigned long ret = 1;
-
-		switch (n) {
-		case 1:
-			__get_user_size(*(u8 *)to, from, 1, ret);
-			break;
-		case 2:
-			__get_user_size(*(u16 *)to, from, 2, ret);
-			break;
-		case 4:
-			__get_user_size(*(u32 *)to, from, 4, ret);
-			break;
-		case 8:
-			__get_user_size(*(u64 *)to, from, 8, ret);
-			break;
-		}
-		if (ret == 0)
-			return 0;
-	}
-	return __copy_tofrom_user((__force void __user *)to, from, n);
-}
-
-static inline unsigned long __copy_to_user_inatomic(void __user *to,
-		const void *from, unsigned long n)
-{
-	if (__builtin_constant_p(n) && (n <= 8)) {
-		unsigned long ret = 1;
-
-		switch (n) {
-		case 1:
-			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
-			break;
-		case 2:
-			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
-			break;
-		case 4:
-			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
-			break;
-		case 8:
-			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
-			break;
-		}
-		if (ret == 0)
-			return 0;
-	}
-	return __copy_tofrom_user(to, (__force const void __user *)from, n);
-}
-
-static inline unsigned long __copy_from_user(void *to,
-		const void __user *from, unsigned long size)
-{
-	might_sleep();
-	return __copy_from_user_inatomic(to, from, size);
-}
-
-static inline unsigned long __copy_to_user(void __user *to,
-		const void *from, unsigned long size)
-{
-	might_sleep();
-	return __copy_to_user_inatomic(to, from, size);
-}
-
-extern unsigned long __clear_user(void __user *addr, unsigned long size);
-
-static inline unsigned long clear_user(void __user *addr, unsigned long size)
-{
-	might_sleep();
-	if (likely(access_ok(VERIFY_WRITE, addr, size)))
-		return __clear_user(addr, size);
-	if ((unsigned long)addr < TASK_SIZE) {
-		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
-		return __clear_user(addr, size - over) + over;
-	}
-	return size;
-}
-
-extern int __strncpy_from_user(char *dst, const char __user *src, long count);
-
-static inline long strncpy_from_user(char *dst, const char __user *src,
-		long count)
-{
-	might_sleep();
-	if (likely(access_ok(VERIFY_READ, src, 1)))
-		return __strncpy_from_user(dst, src, count);
-	return -EFAULT;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 for error
- */
-extern int __strnlen_user(const char __user *str, long len, unsigned long top);
-
-/*
- * Returns the length of the string at str (including the null byte),
- * or 0 if we hit a page we can't access,
- * or something > len if we didn't find a null byte.
- *
- * The `top' parameter to __strnlen_user is to make sure that
- * we can never overflow from the user area into kernel space.
- */
-static inline int strnlen_user(const char __user *str, long len)
-{
-	unsigned long top = current->thread.fs.seg;
-
-	if ((unsigned long)str > top)
-		return 0;
-	return __strnlen_user(str, len, top);
-}
-
-#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
-
-#endif  /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-#endif	/* _ARCH_POWERPC_UACCESS_H */
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
deleted file mode 100644
index 46b09ba6bead..000000000000
--- a/include/asm-powerpc/ucc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_H__
-#define __UCC_H__
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#define STATISTICS
-
-#define UCC_MAX_NUM	8
-
-/* Slow or fast type for UCCs.
-*/
-enum ucc_speed_type {
-	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
-	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
-};
-
-/* ucc_set_type
- * Sets UCC to slow or fast mode.
- *
- * ucc_num - (In) number of UCC (0-7).
- * speed   - (In) slow or fast mode for UCC.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
-	enum comm_dir mode);
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
-
-/* QE MUX clock routing for UCC
-*/
-static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
-}
-
-static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
-}
-
-static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
-}
-
-#endif				/* __UCC_H__ */
diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h
deleted file mode 100644
index f529f70b1d82..000000000000
--- a/include/asm-powerpc/ucc_fast.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * include/asm-powerpc/ucc_fast.h
- *
- * Internal header file for UCC FAST unit routines.
- *
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_FAST_H__
-#define __UCC_FAST_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include "ucc.h"
-
-/* Receive BD's status */
-#define R_E	0x80000000	/* buffer empty */
-#define R_W	0x20000000	/* wrap bit */
-#define R_I	0x10000000	/* interrupt on reception */
-#define R_L	0x08000000	/* last */
-#define R_F	0x04000000	/* first */
-
-/* transmit BD's status */
-#define T_R	0x80000000	/* ready bit */
-#define T_W	0x20000000	/* wrap bit */
-#define T_I	0x10000000	/* interrupt on completion */
-#define T_L	0x08000000	/* last */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases */
-#define UCC_FAST_RX_ALIGN			4
-#define UCC_FAST_MRBLR_ALIGNMENT		4
-#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
-
-/* Sizes */
-#define UCC_FAST_URFS_MIN_VAL				0x88
-#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
-
-/* ucc_fast_channel_protocol_mode - UCC FAST mode */
-enum ucc_fast_channel_protocol_mode {
-	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
-	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
-	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
-	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
-	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
-	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
-	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
-	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
-	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
-	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
-	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
-};
-
-/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
-enum ucc_fast_transparent_txrx {
-	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
-	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
-};
-
-/* UCC fast diagnostic mode */
-enum ucc_fast_diag_mode {
-	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
-	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
-	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
-	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
-};
-
-/* UCC fast Sync length (transparent mode only) */
-enum ucc_fast_sync_len {
-	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
-	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
-	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
-	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
-};
-
-/* UCC fast RTS mode */
-enum ucc_fast_ready_to_send {
-	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
-	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
-};
-
-/* UCC fast receiver decoding mode */
-enum ucc_fast_rx_decoding_method {
-	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
-	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
-	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
-	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
-};
-
-/* UCC fast transmitter encoding mode */
-enum ucc_fast_tx_encoding_method {
-	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
-	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
-	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
-	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
-};
-
-/* UCC fast CRC length */
-enum ucc_fast_transparent_tcrc {
-	UCC_FAST_16_BIT_CRC = 0x00000000,
-	UCC_FAST_CRC_RESERVED0 = 0x00000040,
-	UCC_FAST_32_BIT_CRC = 0x00000080,
-	UCC_FAST_CRC_RESERVED1 = 0x000000C0
-};
-
-/* Fast UCC initialization structure */
-struct ucc_fast_info {
-	int ucc_num;
-	enum qe_clock rx_clock;
-	enum qe_clock tx_clock;
-	u32 regs;
-	int irq;
-	u32 uccm_mask;
-	int bd_mem_part;
-	int brkpt_support;
-	int grant_support;
-	int tsa;
-	int cdp;
-	int cds;
-	int ctsp;
-	int ctss;
-	int tci;
-	int txsy;
-	int rtsm;
-	int revd;
-	int rsyn;
-	u16 max_rx_buf_length;
-	u16 urfs;
-	u16 urfet;
-	u16 urfset;
-	u16 utfs;
-	u16 utfet;
-	u16 utftt;
-	u16 ufpt;
-	enum ucc_fast_channel_protocol_mode mode;
-	enum ucc_fast_transparent_txrx ttx_trx;
-	enum ucc_fast_tx_encoding_method tenc;
-	enum ucc_fast_rx_decoding_method renc;
-	enum ucc_fast_transparent_tcrc tcrc;
-	enum ucc_fast_sync_len synl;
-};
-
-struct ucc_fast_private {
-	struct ucc_fast_info *uf_info;
-	struct ucc_fast *uf_regs;	/* a pointer to memory map of UCC regs. */
-	u32 *p_ucce;		/* a pointer to the event register in memory. */
-	u32 *p_uccm;		/* a pointer to the mask register in memory. */
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
-	u16 *p_utodr;		/* pointer to the transmit on demand register */
-#endif
-	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
-	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
-	int stopped_tx;		/* Whether channel has been stopped for Tx
-				   (STOP_TX, etc.) */
-	int stopped_rx;		/* Whether channel has been stopped for Rx */
-	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
-						    virtual fifo */
-	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
-						    virtual fifo */
-#ifdef STATISTICS
-	u32 tx_frames;		/* Transmitted frames counter. */
-	u32 rx_frames;		/* Received frames counter (only frames
-				   passed to application). */
-	u32 tx_discarded;	/* Discarded tx frames counter (frames that
-				   were discarded by the driver due to errors).
-				   */
-	u32 rx_discarded;	/* Discarded rx frames counter (frames that
-				   were discarded by the driver due to errors).
-				   */
-#endif				/* STATISTICS */
-	u16 mrblr;		/* maximum receive buffer length */
-};
-
-/* ucc_fast_init
- * Initializes Fast UCC according to user provided parameters.
- *
- * uf_info  - (In) pointer to the fast UCC info structure.
- * uccf_ret - (Out) pointer to the fast UCC structure.
- */
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
-
-/* ucc_fast_free
- * Frees all resources for fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_free(struct ucc_fast_private * uccf);
-
-/* ucc_fast_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_irq
- * Handles interrupts on fast UCC.
- * Called from the general interrupt routine to handle interrupts on fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_irq(struct ucc_fast_private * uccf);
-
-/* ucc_fast_transmit_on_demand
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
-
-#endif				/* __UCC_FAST_H__ */
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
deleted file mode 100644
index 0980e6ad335b..000000000000
--- a/include/asm-powerpc/ucc_slow.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC SLOW unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_SLOW_H__
-#define __UCC_SLOW_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include "ucc.h"
-
-/* transmit BD's status */
-#define T_R	0x80000000	/* ready bit */
-#define T_PAD	0x40000000	/* add pads to short frames */
-#define T_W	0x20000000	/* wrap bit */
-#define T_I	0x10000000	/* interrupt on completion */
-#define T_L	0x08000000	/* last */
-
-#define T_A	0x04000000	/* Address - the data transmitted as address
-				   chars */
-#define T_TC	0x04000000	/* transmit CRC */
-#define T_CM	0x02000000	/* continuous mode */
-#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
-#define T_P	0x01000000	/* Preamble - send Preamble sequence before
-				   data */
-#define T_HB	0x01000000	/* heartbeat */
-#define T_NS	0x00800000	/* No Stop */
-#define T_LC	0x00800000	/* late collision */
-#define T_RL	0x00400000	/* retransmission limit */
-#define T_UN	0x00020000	/* underrun */
-#define T_CT	0x00010000	/* CTS lost */
-#define T_CSL	0x00010000	/* carrier sense lost */
-#define T_RC	0x003c0000	/* retry count */
-
-/* Receive BD's status */
-#define R_E	0x80000000	/* buffer empty */
-#define R_W	0x20000000	/* wrap bit */
-#define R_I	0x10000000	/* interrupt on reception */
-#define R_L	0x08000000	/* last */
-#define R_C	0x08000000	/* the last byte in this buffer is a cntl
-				   char */
-#define R_F	0x04000000	/* first */
-#define R_A	0x04000000	/* the first byte in this buffer is address
-				   byte */
-#define R_CM	0x02000000	/* continuous mode */
-#define R_ID	0x01000000	/* buffer close on reception of idles */
-#define R_M	0x01000000	/* Frame received because of promiscuous
-				   mode */
-#define R_AM	0x00800000	/* Address match */
-#define R_DE	0x00800000	/* Address match */
-#define R_LG	0x00200000	/* Break received */
-#define R_BR	0x00200000	/* Frame length violation */
-#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
-#define R_FR	0x00100000	/* Framing Error (no stop bit) character
-				   received */
-#define R_PR	0x00080000	/* Parity Error character received */
-#define R_AB	0x00080000	/* Frame Aborted */
-#define R_SH	0x00080000	/* frame is too short */
-#define R_CR	0x00040000	/* CRC Error */
-#define R_OV	0x00020000	/* Overrun */
-#define R_CD	0x00010000	/* CD lost */
-#define R_CL	0x00010000	/* this frame is closed because of a
-				   collision */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases.*/
-#define UCC_SLOW_RX_ALIGN		4
-#define UCC_SLOW_MRBLR_ALIGNMENT	4
-#define UCC_SLOW_PRAM_SIZE		0x100
-#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
-
-/* UCC Slow Channel Protocol Mode */
-enum ucc_slow_channel_protocol_mode {
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
-};
-
-/* UCC Slow Transparent Transmit CRC (TCRC) */
-enum ucc_slow_transparent_tcrc {
-	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
-	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
-	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
-	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
-	/* 32-bit CCITT CRC (Ethernet and HDLC) */
-	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
-};
-
-/* UCC Slow oversampling rate for transmitter (TDCR) */
-enum ucc_slow_tx_oversampling_rate {
-	/* 1x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
-	/* 8x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
-	/* 16x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
-	/* 32x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
-};
-
-/* UCC Slow Oversampling rate for receiver (RDCR)
-*/
-enum ucc_slow_rx_oversampling_rate {
-	/* 1x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
-	/* 8x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
-	/* 16x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
-	/* 32x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
-};
-
-/* UCC Slow Transmitter encoding method (TENC)
-*/
-enum ucc_slow_tx_encoding_method {
-	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
-	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
-};
-
-/* UCC Slow Receiver decoding method (RENC)
-*/
-enum ucc_slow_rx_decoding_method {
-	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
-	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
-};
-
-/* UCC Slow Diagnostic mode (DIAG)
-*/
-enum ucc_slow_diag_mode {
-	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
-	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
-	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
-	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
-};
-
-struct ucc_slow_info {
-	int ucc_num;
-	int protocol;			/* QE_CR_PROTOCOL_xxx */
-	enum qe_clock rx_clock;
-	enum qe_clock tx_clock;
-	phys_addr_t regs;
-	int irq;
-	u16 uccm_mask;
-	int data_mem_part;
-	int init_tx;
-	int init_rx;
-	u32 tx_bd_ring_len;
-	u32 rx_bd_ring_len;
-	int rx_interrupts;
-	int brkpt_support;
-	int grant_support;
-	int tsa;
-	int cdp;
-	int cds;
-	int ctsp;
-	int ctss;
-	int rinv;
-	int tinv;
-	int rtsm;
-	int rfw;
-	int tci;
-	int tend;
-	int tfl;
-	int txsy;
-	u16 max_rx_buf_length;
-	enum ucc_slow_transparent_tcrc tcrc;
-	enum ucc_slow_channel_protocol_mode mode;
-	enum ucc_slow_diag_mode diag;
-	enum ucc_slow_tx_oversampling_rate tdcr;
-	enum ucc_slow_rx_oversampling_rate rdcr;
-	enum ucc_slow_tx_encoding_method tenc;
-	enum ucc_slow_rx_decoding_method renc;
-};
-
-struct ucc_slow_private {
-	struct ucc_slow_info *us_info;
-	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
-	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
-	u32 us_pram_offset;
-	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
-	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
-	int stopped_tx;		/* Whether channel has been stopped for Tx
-				   (STOP_TX, etc.) */
-	int stopped_rx;		/* Whether channel has been stopped for Rx */
-	struct list_head confQ;	/* frames passed to chip waiting for tx */
-	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
-				   and length for first BD in a frame */
-	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
-	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
-	struct qe_bd *confBd;	/* next BD for confirm after Tx */
-	struct qe_bd *tx_bd;	/* next BD for new Tx request */
-	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
-	void *p_rx_frame;	/* accumulating receive frame */
-	u16 *p_ucce;		/* a pointer to the event register in memory.
-				 */
-	u16 *p_uccm;		/* a pointer to the mask register in memory */
-	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
-#ifdef STATISTICS
-	u32 tx_frames;		/* Transmitted frames counters */
-	u32 rx_frames;		/* Received frames counters (only frames
-				   passed to application) */
-	u32 rx_discarded;	/* Discarded frames counters (frames that
-				   were discarded by the driver due to
-				   errors) */
-#endif				/* STATISTICS */
-};
-
-/* ucc_slow_init
- * Initializes Slow UCC according to provided parameters.
- *
- * us_info  - (In) pointer to the slow UCC info structure.
- * uccs_ret - (Out) pointer to the slow UCC structure.
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
-
-/* ucc_slow_free
- * Frees all resources for slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_free(struct ucc_slow_private * uccs);
-
-/* ucc_slow_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_poll_transmitter_now
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
-
-/* ucc_slow_graceful_stop_tx
- * Smoothly stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_stop_tx
- * Stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_restart_tx
- * Restarts transmitting on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
-
-#endif				/* __UCC_SLOW_H__ */
diff --git a/include/asm-powerpc/ucontext.h b/include/asm-powerpc/ucontext.h
deleted file mode 100644
index d9a4ddf0cc86..000000000000
--- a/include/asm-powerpc/ucontext.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_POWERPC_UCONTEXT_H
-#define _ASM_POWERPC_UCONTEXT_H
-
-#ifdef __powerpc64__
-#include <asm/sigcontext.h>
-#else
-#include <asm/elf.h>
-#endif
-#include <asm/signal.h>
-
-#ifndef __powerpc64__
-struct mcontext {
-	elf_gregset_t	mc_gregs;
-	elf_fpregset_t	mc_fregs;
-	unsigned long	mc_pad[2];
-	elf_vrregset_t	mc_vregs __attribute__((__aligned__(16)));
-};
-#endif
-
-struct ucontext {
-	unsigned long	uc_flags;
-	struct ucontext __user *uc_link;
-	stack_t		uc_stack;
-#ifndef __powerpc64__
-	int		uc_pad[7];
-	struct mcontext	__user *uc_regs;/* points to uc_mcontext field */
-#endif
-	sigset_t	uc_sigmask;
-	/* glibc has 1024-bit signal masks, ours are 64-bit */
-#ifdef __powerpc64__
-	sigset_t	__unused[15];	/* Allow for uc_sigmask growth */
-	struct sigcontext uc_mcontext;	/* last for extensibility */
-#else
-	int		uc_maskext[30];
-	int		uc_pad2[3];
-	struct mcontext	uc_mcontext;
-#endif
-};
-
-#endif /* _ASM_POWERPC_UCONTEXT_H */
diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h
deleted file mode 100644
index 6418ceea44b7..000000000000
--- a/include/asm-powerpc/udbg.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * (c) 2001, 2006 IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_UDBG_H
-#define _ASM_POWERPC_UDBG_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-extern void (*udbg_putc)(char c);
-extern int (*udbg_getc)(void);
-extern int (*udbg_getc_poll)(void);
-
-extern void udbg_puts(const char *s);
-extern int udbg_write(const char *s, int n);
-extern int udbg_read(char *buf, int buflen);
-
-extern void register_early_udbg_console(void);
-extern void udbg_printf(const char *fmt, ...)
-	__attribute__ ((format (printf, 1, 2)));
-extern void udbg_progress(char *s, unsigned short hex);
-
-extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
-			   unsigned int clock);
-extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
-					  unsigned int clock);
-
-struct device_node;
-extern void udbg_scc_init(int force_scc);
-extern int udbg_adb_init(int force_btext);
-extern void udbg_adb_init_early(void);
-
-extern void __init udbg_early_init(void);
-extern void __init udbg_init_debug_lpar(void);
-extern void __init udbg_init_pmac_realmode(void);
-extern void __init udbg_init_maple_realmode(void);
-extern void __init udbg_init_pas_realmode(void);
-extern void __init udbg_init_iseries(void);
-extern void __init udbg_init_rtas_panel(void);
-extern void __init udbg_init_rtas_console(void);
-extern void __init udbg_init_debug_beat(void);
-extern void __init udbg_init_btext(void);
-extern void __init udbg_init_44x_as1(void);
-extern void __init udbg_init_40x_realmode(void);
-extern void __init udbg_init_cpm(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/include/asm-powerpc/uic.h b/include/asm-powerpc/uic.h
deleted file mode 100644
index 970eb7e2186a..000000000000
--- a/include/asm-powerpc/uic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * include/asm-powerpc/uic.h
- *
- * IBM PPC4xx UIC external definitions and structure.
- *
- * Maintainer: David Gibson <dwg@au1.ibm.com>
- * Copyright 2007 IBM Corporation.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_UIC_H
-#define _ASM_POWERPC_UIC_H
-
-#ifdef __KERNEL__
-
-extern void __init uic_init_tree(void);
-extern unsigned int uic_get_irq(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_UIC_H */
diff --git a/include/asm-powerpc/unaligned.h b/include/asm-powerpc/unaligned.h
deleted file mode 100644
index 5f1b1e3c2137..000000000000
--- a/include/asm-powerpc/unaligned.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_POWERPC_UNALIGNED_H
-#define _ASM_POWERPC_UNALIGNED_H
-
-#ifdef __KERNEL__
-
-/*
- * The PowerPC can do unaligned accesses itself in big endian mode.
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_UNALIGNED_H */
diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h
deleted file mode 100644
index f737732c3861..000000000000
--- a/include/asm-powerpc/uninorth.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * uninorth.h: definitions for using the "UniNorth" host bridge chip
- *             from Apple. This chip is used on "Core99" machines
- *	       This also includes U2 used on more recent MacRISC2/3
- *             machines and U3 (G5) 
- *
- */
-#ifdef __KERNEL__
-#ifndef __ASM_UNINORTH_H__
-#define __ASM_UNINORTH_H__
-
-/*
- * Uni-N and U3 config space reg. definitions
- *
- * (Little endian)
- */
-
-/* Address ranges selection. This one should work with Bandit too */
-/* Not U3 */
-#define UNI_N_ADDR_SELECT		0x48
-#define UNI_N_ADDR_COARSE_MASK		0xffff0000	/* 256Mb regions at *0000000 */
-#define UNI_N_ADDR_FINE_MASK		0x0000ffff	/*  16Mb regions at f*000000 */
-
-/* AGP registers */
-/* Not U3 */
-#define UNI_N_CFG_GART_BASE		0x8c
-#define UNI_N_CFG_AGP_BASE		0x90
-#define UNI_N_CFG_GART_CTRL		0x94
-#define UNI_N_CFG_INTERNAL_STATUS	0x98
-#define UNI_N_CFG_GART_DUMMY_PAGE	0xa4
-
-/* UNI_N_CFG_GART_CTRL bits definitions */
-#define UNI_N_CFG_GART_INVAL		0x00000001
-#define UNI_N_CFG_GART_ENABLE		0x00000100
-#define UNI_N_CFG_GART_2xRESET		0x00010000
-#define UNI_N_CFG_GART_DISSBADET	0x00020000
-/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
-#define U3_N_CFG_GART_SYNCMODE		0x00040000
-#define U3_N_CFG_GART_PERFRD		0x00080000
-#define U3_N_CFG_GART_B2BGNT		0x00200000
-#define U3_N_CFG_GART_FASTDDR		0x00400000
-
-/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
- * revision 1.5 (x4 AGP) may need further changes.
- *
- * AGP_BASE register contains the base address of the AGP aperture on
- * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
- * even if decoding of this address range is enabled in the address select
- * register. Apparently, the only supported bases are 256Mb multiples
- * (high 4 bits of that register).
- *
- * GART_BASE register appear to contain the physical address of the GART
- * in system memory in the high address bits (page aligned), and the
- * GART size in the low order bits (number of GART pages)
- *
- * The GART format itself is one 32bits word per physical memory page.
- * This word contains, in little-endian format (!!!), the physical address
- * of the page in the high bits, and what appears to be an "enable" bit
- * in the LSB bit (0) that must be set to 1 when the entry is valid.
- *
- * Obviously, the GART is not cache coherent and so any change to it
- * must be flushed to memory (or maybe just make the GART space non
- * cachable). AGP memory itself doens't seem to be cache coherent neither.
- *
- * In order to invalidate the GART (which is probably necessary to inval
- * the bridge internal TLBs), the following sequence has to be written,
- * in order, to the GART_CTRL register:
- *
- *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
- *   UNI_N_CFG_GART_ENABLE
- *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
- *   UNI_N_CFG_GART_ENABLE
- *
- * As far as AGP "features" are concerned, it looks like fast write may
- * not be supported but this has to be confirmed.
- *
- * Turning on AGP seem to require a double invalidate operation, one before
- * setting the AGP command register, on after.
- *
- * Turning off AGP seems to require the following sequence: first wait
- * for the AGP to be idle by reading the internal status register, then
- * write in that order to the GART_CTRL register:
- *
- *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
- *   0
- *   UNI_N_CFG_GART_2xRESET
- *   0
- */
-
-/*
- * Uni-N memory mapped reg. definitions
- *
- * Those registers are Big-Endian !!
- *
- * Their meaning come from either Darwin and/or from experiments I made with
- * the bootrom, I'm not sure about their exact meaning yet
- *
- */
-
-/* Version of the UniNorth chip */
-#define UNI_N_VERSION			0x0000		/* Known versions: 3,7 and 8 */
-
-#define UNI_N_VERSION_107		0x0003		/* 1.0.7 */
-#define UNI_N_VERSION_10A		0x0007		/* 1.0.10 */
-#define UNI_N_VERSION_150		0x0011		/* 1.5 */
-#define UNI_N_VERSION_200		0x0024		/* 2.0 */
-#define UNI_N_VERSION_PANGEA		0x00C0		/* Integrated U1 + K */
-#define UNI_N_VERSION_INTREPID		0x00D2		/* Integrated U2 + K */
-#define UNI_N_VERSION_300		0x0030		/* 3.0 (U3 on G5) */
-
-/* This register is used to enable/disable various clocks */
-#define UNI_N_CLOCK_CNTL		0x0020
-#define UNI_N_CLOCK_CNTL_PCI		0x00000001	/* PCI2 clock control */
-#define UNI_N_CLOCK_CNTL_GMAC		0x00000002	/* GMAC clock control */
-#define UNI_N_CLOCK_CNTL_FW		0x00000004	/* FireWire clock control */
-#define UNI_N_CLOCK_CNTL_ATA100		0x00000010	/* ATA-100 clock control (U2) */
-
-/* Power Management control */
-#define UNI_N_POWER_MGT			0x0030
-#define UNI_N_POWER_MGT_NORMAL		0x00
-#define UNI_N_POWER_MGT_IDLE2		0x01
-#define UNI_N_POWER_MGT_SLEEP		0x02
-
-/* This register is configured by Darwin depending on the UniN
- * revision
- */
-#define UNI_N_ARB_CTRL			0x0040
-#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT	15
-#define UNI_N_ARB_CTRL_QACK_DELAY_MASK	0x0e1f8000
-#define UNI_N_ARB_CTRL_QACK_DELAY	0x30
-#define UNI_N_ARB_CTRL_QACK_DELAY105	0x00
-
-/* This one _might_ return the CPU number of the CPU reading it;
- * the bootROM decides whether to boot or to sleep/spinloop depending
- * on this register beeing 0 or not
- */
-#define UNI_N_CPU_NUMBER		0x0050
-
-/* This register appear to be read by the bootROM to decide what
- *  to do on a non-recoverable reset (powerup or wakeup)
- */
-#define UNI_N_HWINIT_STATE		0x0070
-#define UNI_N_HWINIT_STATE_SLEEPING	0x01
-#define UNI_N_HWINIT_STATE_RUNNING	0x02
-/* This last bit appear to be used by the bootROM to know the second
- * CPU has started and will enter it's sleep loop with IP=0
- */
-#define UNI_N_HWINIT_STATE_CPU1_FLAG	0x10000000
-
-/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
- * is in low speed mode.
- */
-#define UNI_N_AACK_DELAY		0x0100
-#define UNI_N_AACK_DELAY_ENABLE		0x00000001
-
-/* Clock status for Intrepid */
-#define UNI_N_CLOCK_STOP_STATUS0	0x0150
-#define UNI_N_CLOCK_STOPPED_EXTAGP	0x00200000
-#define UNI_N_CLOCK_STOPPED_AGPDEL	0x00100000
-#define UNI_N_CLOCK_STOPPED_I2S0_45_49	0x00080000
-#define UNI_N_CLOCK_STOPPED_I2S0_18	0x00040000
-#define UNI_N_CLOCK_STOPPED_I2S1_45_49	0x00020000
-#define UNI_N_CLOCK_STOPPED_I2S1_18	0x00010000
-#define UNI_N_CLOCK_STOPPED_TIMER	0x00008000
-#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18	0x00004000
-#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32	0x00002000
-#define UNI_N_CLOCK_STOPPED_SCC_VIA32	0x00001000
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT0	0x00000800
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT1	0x00000400
-#define UNI_N_CLOCK_STOPPED_SCC_SLOT2	0x00000200
-#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO	0x00000100
-#define UNI_N_CLOCK_STOPPED_VEO0	0x00000080
-#define UNI_N_CLOCK_STOPPED_VEO1	0x00000040
-#define UNI_N_CLOCK_STOPPED_USB0	0x00000020
-#define UNI_N_CLOCK_STOPPED_USB1	0x00000010
-#define UNI_N_CLOCK_STOPPED_USB2	0x00000008
-#define UNI_N_CLOCK_STOPPED_32		0x00000004
-#define UNI_N_CLOCK_STOPPED_45		0x00000002
-#define UNI_N_CLOCK_STOPPED_49		0x00000001
-
-#define UNI_N_CLOCK_STOP_STATUS1	0x0160
-#define UNI_N_CLOCK_STOPPED_PLL4REF	0x00080000
-#define UNI_N_CLOCK_STOPPED_CPUDEL	0x00040000
-#define UNI_N_CLOCK_STOPPED_CPU		0x00020000
-#define UNI_N_CLOCK_STOPPED_BUF_REFCKO	0x00010000
-#define UNI_N_CLOCK_STOPPED_PCI2	0x00008000
-#define UNI_N_CLOCK_STOPPED_FW		0x00004000
-#define UNI_N_CLOCK_STOPPED_GB		0x00002000
-#define UNI_N_CLOCK_STOPPED_ATA66	0x00001000
-#define UNI_N_CLOCK_STOPPED_ATA100	0x00000800
-#define UNI_N_CLOCK_STOPPED_MAX		0x00000400
-#define UNI_N_CLOCK_STOPPED_PCI1	0x00000200
-#define UNI_N_CLOCK_STOPPED_KLPCI	0x00000100
-#define UNI_N_CLOCK_STOPPED_USB0PCI	0x00000080
-#define UNI_N_CLOCK_STOPPED_USB1PCI	0x00000040
-#define UNI_N_CLOCK_STOPPED_USB2PCI	0x00000020
-#define UNI_N_CLOCK_STOPPED_7PCI1	0x00000008
-#define UNI_N_CLOCK_STOPPED_AGP		0x00000004
-#define UNI_N_CLOCK_STOPPED_PCI0	0x00000002
-#define UNI_N_CLOCK_STOPPED_18		0x00000001
-
-/* Intrepid registe to OF do-platform-clockspreading */
-#define UNI_N_CLOCK_SPREADING		0x190
-
-/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
-
-
-/*
- * U3 specific registers
- */
-
-
-/* U3 Toggle */
-#define U3_TOGGLE_REG			0x00e0
-#define U3_PMC_START_STOP		0x0001
-#define U3_MPIC_RESET			0x0002
-#define U3_MPIC_OUTPUT_ENABLE		0x0004
-
-/* U3 API PHY Config 1 */
-#define U3_API_PHY_CONFIG_1		0x23030
-
-/* U3 HyperTransport registers */
-#define U3_HT_CONFIG_BASE      		0x70000
-#define U3_HT_LINK_COMMAND		0x100
-#define U3_HT_LINK_CONFIG		0x110
-#define U3_HT_LINK_FREQ			0x120
-
-#endif /* __ASM_UNINORTH_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
deleted file mode 100644
index ce91bb662063..000000000000
--- a/include/asm-powerpc/unistd.h
+++ /dev/null
@@ -1,392 +0,0 @@
-#ifndef _ASM_POWERPC_UNISTD_H_
-#define _ASM_POWERPC_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_query_module	166
-#define __NR_poll		167
-#define __NR_nfsservctl		168
-#define __NR_setresgid		169
-#define __NR_getresgid		170
-#define __NR_prctl		171
-#define __NR_rt_sigreturn	172
-#define __NR_rt_sigaction	173
-#define __NR_rt_sigprocmask	174
-#define __NR_rt_sigpending	175
-#define __NR_rt_sigtimedwait	176
-#define __NR_rt_sigqueueinfo	177
-#define __NR_rt_sigsuspend	178
-#define __NR_pread64		179
-#define __NR_pwrite64		180
-#define __NR_chown		181
-#define __NR_getcwd		182
-#define __NR_capget		183
-#define __NR_capset		184
-#define __NR_sigaltstack	185
-#define __NR_sendfile		186
-#define __NR_getpmsg		187	/* some people actually want streams */
-#define __NR_putpmsg		188	/* some people actually want streams */
-#define __NR_vfork		189
-#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
-#define __NR_readahead		191
-#ifndef __powerpc64__			/* these are 32-bit only */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#endif
-#define __NR_pciconfig_read	198
-#define __NR_pciconfig_write	199
-#define __NR_pciconfig_iobase	200
-#define __NR_multiplexer	201
-#define __NR_getdents64		202
-#define __NR_pivot_root		203
-#ifndef __powerpc64__
-#define __NR_fcntl64		204
-#endif
-#define __NR_madvise		205
-#define __NR_mincore		206
-#define __NR_gettid		207
-#define __NR_tkill		208
-#define __NR_setxattr		209
-#define __NR_lsetxattr		210
-#define __NR_fsetxattr		211
-#define __NR_getxattr		212
-#define __NR_lgetxattr		213
-#define __NR_fgetxattr		214
-#define __NR_listxattr		215
-#define __NR_llistxattr		216
-#define __NR_flistxattr		217
-#define __NR_removexattr	218
-#define __NR_lremovexattr	219
-#define __NR_fremovexattr	220
-#define __NR_futex		221
-#define __NR_sched_setaffinity	222
-#define __NR_sched_getaffinity	223
-/* 224 currently unused */
-#define __NR_tuxcall		225
-#ifndef __powerpc64__
-#define __NR_sendfile64		226
-#endif
-#define __NR_io_setup		227
-#define __NR_io_destroy		228
-#define __NR_io_getevents	229
-#define __NR_io_submit		230
-#define __NR_io_cancel		231
-#define __NR_set_tid_address	232
-#define __NR_fadvise64		233
-#define __NR_exit_group		234
-#define __NR_lookup_dcookie	235
-#define __NR_epoll_create	236
-#define __NR_epoll_ctl		237
-#define __NR_epoll_wait		238
-#define __NR_remap_file_pages	239
-#define __NR_timer_create	240
-#define __NR_timer_settime	241
-#define __NR_timer_gettime	242
-#define __NR_timer_getoverrun	243
-#define __NR_timer_delete	244
-#define __NR_clock_settime	245
-#define __NR_clock_gettime	246
-#define __NR_clock_getres	247
-#define __NR_clock_nanosleep	248
-#define __NR_swapcontext	249
-#define __NR_tgkill		250
-#define __NR_utimes		251
-#define __NR_statfs64		252
-#define __NR_fstatfs64		253
-#ifndef __powerpc64__
-#define __NR_fadvise64_64	254
-#endif
-#define __NR_rtas		255
-#define __NR_sys_debug_setcontext 256
-/* Number 257 is reserved for vserver */
-#define __NR_migrate_pages	258
-#define __NR_mbind		259
-#define __NR_get_mempolicy	260
-#define __NR_set_mempolicy	261
-#define __NR_mq_open		262
-#define __NR_mq_unlink		263
-#define __NR_mq_timedsend	264
-#define __NR_mq_timedreceive	265
-#define __NR_mq_notify		266
-#define __NR_mq_getsetattr	267
-#define __NR_kexec_load		268
-#define __NR_add_key		269
-#define __NR_request_key	270
-#define __NR_keyctl		271
-#define __NR_waitid		272
-#define __NR_ioprio_set		273
-#define __NR_ioprio_get		274
-#define __NR_inotify_init	275
-#define __NR_inotify_add_watch	276
-#define __NR_inotify_rm_watch	277
-#define __NR_spu_run		278
-#define __NR_spu_create		279
-#define __NR_pselect6		280
-#define __NR_ppoll		281
-#define __NR_unshare		282
-#define __NR_splice		283
-#define __NR_tee		284
-#define __NR_vmsplice		285
-#define __NR_openat		286
-#define __NR_mkdirat		287
-#define __NR_mknodat		288
-#define __NR_fchownat		289
-#define __NR_futimesat		290
-#ifdef __powerpc64__
-#define __NR_newfstatat		291
-#else
-#define __NR_fstatat64		291
-#endif
-#define __NR_unlinkat		292
-#define __NR_renameat		293
-#define __NR_linkat		294
-#define __NR_symlinkat		295
-#define __NR_readlinkat		296
-#define __NR_fchmodat		297
-#define __NR_faccessat		298
-#define __NR_get_robust_list	299
-#define __NR_set_robust_list	300
-#define __NR_move_pages		301
-#define __NR_getcpu		302
-#define __NR_epoll_pwait	303
-#define __NR_utimensat		304
-#define __NR_signalfd		305
-#define __NR_timerfd_create	306
-#define __NR_eventfd		307
-#define __NR_sync_file_range2	308
-#define __NR_fallocate		309
-#define __NR_subpage_prot	310
-#define __NR_timerfd_settime	311
-#define __NR_timerfd_gettime	312
-
-#ifdef __KERNEL__
-
-#define __NR_syscalls		313
-
-#define __NR__exit __NR_exit
-#define NR_syscalls	__NR_syscalls
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#ifdef CONFIG_PPC32
-#define __ARCH_WANT_OLD_STAT
-#endif
-#ifdef CONFIG_PPC64
-#define __ARCH_WANT_COMPAT_SYS_TIME
-#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_SYS_NEWFSTATAT
-#endif
-
-/*
- * "Conditional" syscalls
- */
-#define cond_syscall(x) \
-	asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
-
-#endif		/* __ASSEMBLY__ */
-#endif		/* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/include/asm-powerpc/user.h b/include/asm-powerpc/user.h
deleted file mode 100644
index 3fd4545dd74e..000000000000
--- a/include/asm-powerpc/user.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_POWERPC_USER_H
-#define _ASM_POWERPC_USER_H
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Adapted from <asm-alpha/user.h>
- *
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
- * are as follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *	what is present in the file.  Directly after this is a
- *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
- *	are stored as part of the upage.  The upage should always be
- *	only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *	current->brk to pick up all of the user variables, plus any memory
- *	that may have been sbrk'ed.  No attempt is made to determine if a
- *	page is demand-zero or if a page is totally unused, we just cover
- *	the entire range.  All of the addresses are rounded in such a way
- *	that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *	backtrace.  We need to write the data from usp to
- *	current->start_stack, so we round each of these in order to be able
- *	to write an integer number of pages.
- */
-struct user {
-	struct pt_regs	regs;			/* entire machine state */
-	size_t		u_tsize;		/* text size (pages) */
-	size_t		u_dsize;		/* data size (pages) */
-	size_t		u_ssize;		/* stack size (pages) */
-	unsigned long	start_code;		/* text starting address */
-	unsigned long	start_data;		/* data starting address */
-	unsigned long	start_stack;		/* stack starting address */
-	long int	signal;			/* signal causing core dump */
-	unsigned long	u_ar0;			/* help gdb find registers */
-	unsigned long	magic;			/* identifies a core file */
-	char		u_comm[32];		/* user command name */
-};
-
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-#endif	/* _ASM_POWERPC_USER_H */
diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h
deleted file mode 100644
index 26fc449bd989..000000000000
--- a/include/asm-powerpc/vdso.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef __PPC64_VDSO_H__
-#define __PPC64_VDSO_H__
-
-#ifdef __KERNEL__
-
-/* Default link addresses for the vDSOs */
-#define VDSO32_LBASE	0x100000
-#define VDSO64_LBASE	0x100000
-
-/* Default map addresses */
-#define VDSO32_MBASE	VDSO32_LBASE
-#define VDSO64_MBASE	VDSO64_LBASE
-
-#define VDSO_VERSION_STRING	LINUX_2.6.15
-
-/* Define if 64 bits VDSO has procedure descriptors */
-#undef VDS64_HAS_DESCRIPTORS
-
-#ifndef __ASSEMBLY__
-
-/* Offsets relative to thread->vdso_base */
-extern unsigned long vdso64_rt_sigtramp;
-extern unsigned long vdso32_sigtramp;
-extern unsigned long vdso32_rt_sigtramp;
-
-#else /* __ASSEMBLY__ */
-
-#ifdef __VDSO64__
-#ifdef VDS64_HAS_DESCRIPTORS
-#define V_FUNCTION_BEGIN(name)		\
-	.globl name;			\
-        .section ".opd","a";		\
-        .align 3;			\
-	name:				\
-	.quad .name,.TOC.@tocbase,0;	\
-	.previous;			\
-	.globl .name;			\
-	.type .name,@function; 		\
-	.name:				\
-
-#define V_FUNCTION_END(name)		\
-	.size .name,.-.name;
-
-#define V_LOCAL_FUNC(name) (.name)
-
-#else /* VDS64_HAS_DESCRIPTORS */
-
-#define V_FUNCTION_BEGIN(name)		\
-	.globl name;			\
-	name:				\
-
-#define V_FUNCTION_END(name)		\
-	.size name,.-name;
-
-#define V_LOCAL_FUNC(name) (name)
-
-#endif /* VDS64_HAS_DESCRIPTORS */
-#endif /* __VDSO64__ */
-
-#ifdef __VDSO32__
-
-#define V_FUNCTION_BEGIN(name)		\
-	.globl name;			\
-	.type name,@function; 		\
-	name:				\
-
-#define V_FUNCTION_END(name)		\
-	.size name,.-name;
-
-#define V_LOCAL_FUNC(name) (name)
-
-#endif /* __VDSO32__ */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __PPC64_VDSO_H__ */
diff --git a/include/asm-powerpc/vdso_datapage.h b/include/asm-powerpc/vdso_datapage.h
deleted file mode 100644
index f01393224b52..000000000000
--- a/include/asm-powerpc/vdso_datapage.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef _VDSO_DATAPAGE_H
-#define _VDSO_DATAPAGE_H
-#ifdef __KERNEL__
-
-/*
- * Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM
- * Copyright (C) 2005 Benjamin Herrenschmidy <benh@kernel.crashing.org>,
- * 		      IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-
-/*
- * Note about this structure:
- *
- * This structure was historically called systemcfg and exposed to
- * userland via /proc/ppc64/systemcfg. Unfortunately, this became an
- * ABI issue as some proprietary software started relying on being able
- * to mmap() it, thus we have to keep the base layout at least for a
- * few kernel versions.
- *
- * However, since ppc32 doesn't suffer from this backward handicap,
- * a simpler version of the data structure is used there with only the
- * fields actually used by the vDSO.
- *
- */
-
-/*
- * If the major version changes we are incompatible.
- * Minor version changes are a hint.
- */
-#define SYSTEMCFG_MAJOR 1
-#define SYSTEMCFG_MINOR 1
-
-#ifndef __ASSEMBLY__
-
-#include <linux/unistd.h>
-
-#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
-
-/*
- * So here is the ppc64 backward compatible version
- */
-
-#ifdef CONFIG_PPC64
-
-struct vdso_data {
-	__u8  eye_catcher[16];		/* Eyecatcher: SYSTEMCFG:PPC64	0x00 */
-	struct {			/* Systemcfg version numbers	     */
-		__u32 major;		/* Major number			0x10 */
-		__u32 minor;		/* Minor number			0x14 */
-	} version;
-
-	/* Note about the platform flags: it now only contains the lpar
-	 * bit. The actual platform number is dead and burried
-	 */
-	__u32 platform;			/* Platform flags		0x18 */
-	__u32 processor;		/* Processor type		0x1C */
-	__u64 processorCount;		/* # of physical processors	0x20 */
-	__u64 physicalMemorySize;	/* Size of real memory(B)	0x28 */
-	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
-	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
-	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
-	__u64 stamp_xsec;		/*				0x48 */
-	__u64 tb_update_count;		/* Timebase atomicity ctr	0x50 */
-	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
-	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
-	__u32 dcache_size;		/* L1 d-cache size		0x60 */
-	__u32 dcache_line_size;		/* L1 d-cache line size		0x64 */
-	__u32 icache_size;		/* L1 i-cache size		0x68 */
-	__u32 icache_line_size;		/* L1 i-cache line size		0x6C */
-
-	/* those additional ones don't have to be located anywhere
-	 * special as they were not part of the original systemcfg
-	 */
-	__u32 dcache_block_size;		/* L1 d-cache block size     */
-	__u32 icache_block_size;		/* L1 i-cache block size     */
-	__u32 dcache_log_block_size;		/* L1 d-cache log block size */
-	__u32 icache_log_block_size;		/* L1 i-cache log block size */
-	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
-	__s32 wtom_clock_nsec;
-   	__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls  */
-   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
-};
-
-#else /* CONFIG_PPC64 */
-
-/*
- * And here is the simpler 32 bits version
- */
-struct vdso_data {
-	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
-	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
-	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
-	__u64 stamp_xsec;		/*				0x48 */
-	__u32 tb_update_count;		/* Timebase atomicity ctr	0x50 */
-	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
-	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
-	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
-	__s32 wtom_clock_nsec;
-   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
-	__u32 dcache_block_size;	/* L1 d-cache block size     */
-	__u32 icache_block_size;	/* L1 i-cache block size     */
-	__u32 dcache_log_block_size;	/* L1 d-cache log block size */
-	__u32 icache_log_block_size;	/* L1 i-cache log block size */
-};
-
-#endif /* CONFIG_PPC64 */
-
-#ifdef __KERNEL__
-extern struct vdso_data *vdso_data;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _SYSTEMCFG_H */
diff --git a/include/asm-powerpc/vga.h b/include/asm-powerpc/vga.h
deleted file mode 100644
index a2eac409c1ec..000000000000
--- a/include/asm-powerpc/vga.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ASM_POWERPC_VGA_H_
-#define _ASM_POWERPC_VGA_H_
-
-#ifdef __KERNEL__
-
-/*
- *	Access to VGA videoram
- *
- *	(c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-
-#include <asm/io.h>
-
-
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
-
-#define VT_BUF_HAVE_RW
-/*
- *  These are only needed for supporting VGA or MDA text mode, which use little
- *  endian byte ordering.
- *  In other cases, we can optimize by using native byte ordering and
- *  <linux/vt_buffer.h> has already done the right job for us.
- */
-
-static inline void scr_writew(u16 val, volatile u16 *addr)
-{
-    st_le16(addr, val);
-}
-
-static inline u16 scr_readw(volatile const u16 *addr)
-{
-    return ld_le16(addr);
-}
-
-#define VT_BUF_HAVE_MEMCPYW
-#define scr_memcpyw	memcpy
-
-#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
-
-extern unsigned long vgacon_remap_base;
-
-#ifdef __powerpc64__
-#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s))
-#else
-#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
-#endif
-
-#define vga_readb(x) (*(x))
-#define vga_writeb(x,y) (*(y) = (x))
-
-#endif	/* __KERNEL__ */
-#endif	/* _ASM_POWERPC_VGA_H_ */
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
deleted file mode 100644
index 56512a968dab..000000000000
--- a/include/asm-powerpc/vio.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * IBM PowerPC Virtual I/O Infrastructure Support.
- *
- * Copyright (c) 2003 IBM Corp.
- *  Dave Engebretsen engebret@us.ibm.com
- *  Santiago Leon santil@us.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_POWERPC_VIO_H
-#define _ASM_POWERPC_VIO_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/mod_devicetable.h>
-
-#include <asm/hvcall.h>
-#include <asm/scatterlist.h>
-
-/*
- * Architecture-specific constants for drivers to
- * extract attributes of the device using vio_get_attribute()
- */
-#define VETH_MAC_ADDR "local-mac-address"
-#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
-
-/* End architecture-specific constants */
-
-#define h_vio_signal(ua, mode) \
-  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
-
-#define VIO_IRQ_DISABLE		0UL
-#define VIO_IRQ_ENABLE		1UL
-
-struct iommu_table;
-
-/*
- * The vio_dev structure is used to describe virtual I/O devices.
- */
-struct vio_dev {
-	const char *name;
-	const char *type;
-	uint32_t unit_address;
-	unsigned int irq;
-	struct device dev;
-};
-
-struct vio_driver {
-	const struct vio_device_id *id_table;
-	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
-	int (*remove)(struct vio_dev *dev);
-	struct device_driver driver;
-};
-
-extern int vio_register_driver(struct vio_driver *drv);
-extern void vio_unregister_driver(struct vio_driver *drv);
-
-extern void __devinit vio_unregister_device(struct vio_dev *dev);
-
-struct device_node;
-
-extern struct vio_dev *vio_register_device_node(
-		struct device_node *node_vdev);
-extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
-		int *length);
-#ifdef CONFIG_PPC_PSERIES
-extern struct vio_dev *vio_find_node(struct device_node *vnode);
-extern int vio_enable_interrupts(struct vio_dev *dev);
-extern int vio_disable_interrupts(struct vio_dev *dev);
-#else
-static inline int vio_enable_interrupts(struct vio_dev *dev)
-{
-	return 0;
-}
-#endif
-
-static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
-{
-	return container_of(drv, struct vio_driver, driver);
-}
-
-static inline struct vio_dev *to_vio_dev(struct device *dev)
-{
-	return container_of(dev, struct vio_dev, dev);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_VIO_H */
diff --git a/include/asm-powerpc/xilinx_intc.h b/include/asm-powerpc/xilinx_intc.h
deleted file mode 100644
index 343612f8fece..000000000000
--- a/include/asm-powerpc/xilinx_intc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Xilinx intc external definitions
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_XILINX_INTC_H
-#define _ASM_POWERPC_XILINX_INTC_H
-
-#ifdef __KERNEL__
-
-extern void __init xilinx_intc_init_tree(void);
-extern unsigned int xilinx_intc_get_irq(void);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_XILINX_INTC_H */
diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h
deleted file mode 100644
index 5eb8e599e5cc..000000000000
--- a/include/asm-powerpc/xmon.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __ASM_POWERPC_XMON_H
-#define __ASM_POWERPC_XMON_H
-
-/*
- * Copyrignt (C) 2006 IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/irqreturn.h>
-
-#ifdef CONFIG_XMON
-extern void xmon_setup(void);
-extern void xmon_register_spus(struct list_head *list);
-struct pt_regs;
-extern int xmon(struct pt_regs *excp);
-extern irqreturn_t xmon_irq(int, void *);
-#else
-static inline void xmon_setup(void) { };
-static inline void xmon_register_spus(struct list_head *list) { };
-#endif
-
-#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
-extern int cpus_are_in_xmon(void);
-#endif
-
-#endif /* __KERNEL __ */
-#endif /* __ASM_POWERPC_XMON_H */
diff --git a/include/asm-powerpc/xor.h b/include/asm-powerpc/xor.h
deleted file mode 100644
index c82eb12a5b18..000000000000
--- a/include/asm-powerpc/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/include/asm-s390/Kbuild b/include/asm-s390/Kbuild
deleted file mode 100644
index bb5e9edb9825..000000000000
--- a/include/asm-s390/Kbuild
+++ /dev/null
@@ -1,16 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += dasd.h
-header-y += monwriter.h
-header-y += qeth.h
-header-y += tape390.h
-header-y += ucontext.h
-header-y += vtoc.h
-header-y += zcrypt.h
-header-y += kvm.h
-header-y += chsc.h
-
-unifdef-y += cmb.h
-unifdef-y += debug.h
-unifdef-y += chpid.h
-unifdef-y += schid.h
diff --git a/include/asm-s390/airq.h b/include/asm-s390/airq.h
deleted file mode 100644
index 1ac80d6b0588..000000000000
--- a/include/asm-s390/airq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  include/asm-s390/airq.h
- *
- *    Copyright IBM Corp. 2002,2007
- *    Author(s): Ingo Adlung <adlung@de.ibm.com>
- *		 Cornelia Huck <cornelia.huck@de.ibm.com>
- *		 Arnd Bergmann <arndb@de.ibm.com>
- *		 Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
- */
-
-#ifndef _ASM_S390_AIRQ_H
-#define _ASM_S390_AIRQ_H
-
-typedef void (*adapter_int_handler_t)(void *, void *);
-
-void *s390_register_adapter_interrupt(adapter_int_handler_t, void *, u8);
-void s390_unregister_adapter_interrupt(void *, u8);
-
-#endif /* _ASM_S390_AIRQ_H */
diff --git a/include/asm-s390/appldata.h b/include/asm-s390/appldata.h
deleted file mode 100644
index 79283dac8281..000000000000
--- a/include/asm-s390/appldata.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * include/asm-s390/appldata.h
- *
- * Copyright (C) IBM Corp. 2006
- *
- * Author(s): Melissa Howland <melissah@us.ibm.com>
- */
-
-#ifndef _ASM_S390_APPLDATA_H
-#define _ASM_S390_APPLDATA_H
-
-#include <asm/io.h>
-
-#ifndef CONFIG_64BIT
-
-#define APPLDATA_START_INTERVAL_REC	0x00	/* Function codes for */
-#define APPLDATA_STOP_REC		0x01	/* DIAG 0xDC	      */
-#define APPLDATA_GEN_EVENT_REC		0x02
-#define APPLDATA_START_CONFIG_REC	0x03
-
-/*
- * Parameter list for DIAGNOSE X'DC'
- */
-struct appldata_parameter_list {
-	u16 diag;		/* The DIAGNOSE code X'00DC'	      */
-	u8  function;		/* The function code for the DIAGNOSE */
-	u8  parlist_length;	/* Length of the parameter list       */
-	u32 product_id_addr;	/* Address of the 16-byte product ID  */
-	u16 reserved;
-	u16 buffer_length;	/* Length of the application data buffer  */
-	u32 buffer_addr;	/* Address of the application data buffer */
-} __attribute__ ((packed));
-
-#else /* CONFIG_64BIT */
-
-#define APPLDATA_START_INTERVAL_REC	0x80
-#define APPLDATA_STOP_REC		0x81
-#define APPLDATA_GEN_EVENT_REC		0x82
-#define APPLDATA_START_CONFIG_REC	0x83
-
-/*
- * Parameter list for DIAGNOSE X'DC'
- */
-struct appldata_parameter_list {
-	u16 diag;
-	u8  function;
-	u8  parlist_length;
-	u32 unused01;
-	u16 reserved;
-	u16 buffer_length;
-	u32 unused02;
-	u64 product_id_addr;
-	u64 buffer_addr;
-} __attribute__ ((packed));
-
-#endif /* CONFIG_64BIT */
-
-struct appldata_product_id {
-	char prod_nr[7];	/* product number */
-	u16  prod_fn;		/* product function */
-	u8   record_nr; 	/* record number */
-	u16  version_nr;	/* version */
-	u16  release_nr;	/* release */
-	u16  mod_lvl;		/* modification level */
-} __attribute__ ((packed));
-
-static inline int appldata_asm(struct appldata_product_id *id,
-			       unsigned short fn, void *buffer,
-			       unsigned short length)
-{
-	struct appldata_parameter_list parm_list;
-	int ry;
-
-	if (!MACHINE_IS_VM)
-		return -ENOSYS;
-	parm_list.diag = 0xdc;
-	parm_list.function = fn;
-	parm_list.parlist_length = sizeof(parm_list);
-	parm_list.buffer_length = length;
-	parm_list.product_id_addr = (unsigned long) id;
-	parm_list.buffer_addr = virt_to_phys(buffer);
-	asm volatile(
-		"	diag	%1,%0,0xdc"
-		: "=d" (ry)
-		: "d" (&parm_list), "m" (parm_list), "m" (*id)
-		: "cc");
-	return ry;
-}
-
-#endif /* _ASM_S390_APPLDATA_H */
diff --git a/include/asm-s390/atomic.h b/include/asm-s390/atomic.h
deleted file mode 100644
index 2d184655bc5d..000000000000
--- a/include/asm-s390/atomic.h
+++ /dev/null
@@ -1,285 +0,0 @@
-#ifndef __ARCH_S390_ATOMIC__
-#define __ARCH_S390_ATOMIC__
-
-#include <linux/compiler.h>
-
-/*
- *  include/asm-s390/atomic.h
- *
- *  S390 version
- *    Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Denis Joseph Barrow,
- *		 Arnd Bergmann (arndb@de.ibm.com)
- *
- *  Derived from "include/asm-i386/bitops.h"
- *    Copyright (C) 1992, Linus Torvalds
- *
- */
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
- */
-
-typedef struct {
-	int counter;
-} __attribute__ ((aligned (4))) atomic_t;
-#define ATOMIC_INIT(i)  { (i) }
-
-#ifdef __KERNEL__
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-#define __CS_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
-	asm volatile(							\
-		"	l	%0,%2\n"				\
-		"0:	lr	%1,%0\n"				\
-		op_string "	%1,%3\n"				\
-		"	cs	%0,%1,%2\n"				\
-		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=Q" (((atomic_t *)(ptr))->counter)			\
-		: "d" (op_val),	 "Q" (((atomic_t *)(ptr))->counter)	\
-		: "cc", "memory");					\
-	new_val;							\
-})
-
-#else /* __GNUC__ */
-
-#define __CS_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
-	asm volatile(							\
-		"	l	%0,0(%3)\n"				\
-		"0:	lr	%1,%0\n"				\
-		op_string "	%1,%4\n"				\
-		"	cs	%0,%1,0(%3)\n"				\
-		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=m" (((atomic_t *)(ptr))->counter)			\
-		: "a" (ptr), "d" (op_val),				\
-		  "m" (((atomic_t *)(ptr))->counter)			\
-		: "cc", "memory");					\
-	new_val;							\
-})
-
-#endif /* __GNUC__ */
-
-static inline int atomic_read(const atomic_t *v)
-{
-	barrier();
-	return v->counter;
-}
-
-static inline void atomic_set(atomic_t *v, int i)
-{
-	v->counter = i;
-	barrier();
-}
-
-static __inline__ int atomic_add_return(int i, atomic_t * v)
-{
-	return __CS_LOOP(v, i, "ar");
-}
-#define atomic_add(_i, _v)		atomic_add_return(_i, _v)
-#define atomic_add_negative(_i, _v)	(atomic_add_return(_i, _v) < 0)
-#define atomic_inc(_v)			atomic_add_return(1, _v)
-#define atomic_inc_return(_v)		atomic_add_return(1, _v)
-#define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
-
-static __inline__ int atomic_sub_return(int i, atomic_t * v)
-{
-	return __CS_LOOP(v, i, "sr");
-}
-#define atomic_sub(_i, _v)		atomic_sub_return(_i, _v)
-#define atomic_sub_and_test(_i, _v)	(atomic_sub_return(_i, _v) == 0)
-#define atomic_dec(_v)			atomic_sub_return(1, _v)
-#define atomic_dec_return(_v)		atomic_sub_return(1, _v)
-#define atomic_dec_and_test(_v)		(atomic_sub_return(1, _v) == 0)
-
-static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
-{
-	       __CS_LOOP(v, ~mask, "nr");
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
-{
-	       __CS_LOOP(v, mask, "or");
-}
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-	asm volatile(
-		"	cs	%0,%2,%1"
-		: "+d" (old), "=Q" (v->counter)
-		: "d" (new), "Q" (v->counter)
-		: "cc", "memory");
-#else /* __GNUC__ */
-	asm volatile(
-		"	cs	%0,%3,0(%2)"
-		: "+d" (old), "=m" (v->counter)
-		: "a" (v), "d" (new), "m" (v->counter)
-		: "cc", "memory");
-#endif /* __GNUC__ */
-	return old;
-}
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == u))
-			break;
-		old = atomic_cmpxchg(v, c, c + a);
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != u;
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#undef __CS_LOOP
-
-#ifdef __s390x__
-typedef struct {
-	long long counter;
-} __attribute__ ((aligned (8))) atomic64_t;
-#define ATOMIC64_INIT(i)  { (i) }
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-#define __CSG_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
-	asm volatile(							\
-		"	lg	%0,%2\n"				\
-		"0:	lgr	%1,%0\n"				\
-		op_string "	%1,%3\n"				\
-		"	csg	%0,%1,%2\n"				\
-		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=Q" (((atomic_t *)(ptr))->counter)			\
-		: "d" (op_val),	"Q" (((atomic_t *)(ptr))->counter)	\
-		: "cc", "memory" );					\
-	new_val;							\
-})
-
-#else /* __GNUC__ */
-
-#define __CSG_LOOP(ptr, op_val, op_string) ({				\
-	typeof(ptr->counter) old_val, new_val;				\
-	asm volatile(							\
-		"	lg	%0,0(%3)\n"				\
-		"0:	lgr	%1,%0\n"				\
-		op_string "	%1,%4\n"				\
-		"	csg	%0,%1,0(%3)\n"				\
-		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=m" (((atomic_t *)(ptr))->counter)			\
-		: "a" (ptr), "d" (op_val),				\
-		  "m" (((atomic_t *)(ptr))->counter)			\
-		: "cc", "memory" );					\
-	new_val;							\
-})
-
-#endif /* __GNUC__ */
-
-static inline long long atomic64_read(const atomic64_t *v)
-{
-	barrier();
-	return v->counter;
-}
-
-static inline void atomic64_set(atomic64_t *v, long long i)
-{
-	v->counter = i;
-	barrier();
-}
-
-static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
-{
-	return __CSG_LOOP(v, i, "agr");
-}
-#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
-#define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
-#define atomic64_inc(_v)		atomic64_add_return(1, _v)
-#define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
-#define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
-
-static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
-{
-	return __CSG_LOOP(v, i, "sgr");
-}
-#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
-#define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
-#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
-#define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
-#define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
-
-static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
-{
-	       __CSG_LOOP(v, ~mask, "ngr");
-}
-
-static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
-{
-	       __CSG_LOOP(v, mask, "ogr");
-}
-
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
-					     long long old, long long new)
-{
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-	asm volatile(
-		"	csg	%0,%2,%1"
-		: "+d" (old), "=Q" (v->counter)
-		: "d" (new), "Q" (v->counter)
-		: "cc", "memory");
-#else /* __GNUC__ */
-	asm volatile(
-		"	csg	%0,%3,0(%2)"
-		: "+d" (old), "=m" (v->counter)
-		: "a" (v), "d" (new), "m" (v->counter)
-		: "cc", "memory");
-#endif /* __GNUC__ */
-	return old;
-}
-
-static __inline__ int atomic64_add_unless(atomic64_t *v,
-					  long long a, long long u)
-{
-	long long c, old;
-	c = atomic64_read(v);
-	for (;;) {
-		if (unlikely(c == u))
-			break;
-		old = atomic64_cmpxchg(v, c, c + a);
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != u;
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#undef __CSG_LOOP
-#endif
-
-#define smp_mb__before_atomic_dec()	smp_mb()
-#define smp_mb__after_atomic_dec()	smp_mb()
-#define smp_mb__before_atomic_inc()	smp_mb()
-#define smp_mb__after_atomic_inc()	smp_mb()
-
-#include <asm-generic/atomic.h>
-#endif /* __KERNEL__ */
-#endif /* __ARCH_S390_ATOMIC__  */
diff --git a/include/asm-s390/auxvec.h b/include/asm-s390/auxvec.h
deleted file mode 100644
index 0d340720fd99..000000000000
--- a/include/asm-s390/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMS390_AUXVEC_H
-#define __ASMS390_AUXVEC_H
-
-#endif
diff --git a/include/asm-s390/bitops.h b/include/asm-s390/bitops.h
deleted file mode 100644
index b4eb24ab5af9..000000000000
--- a/include/asm-s390/bitops.h
+++ /dev/null
@@ -1,884 +0,0 @@
-#ifndef _S390_BITOPS_H
-#define _S390_BITOPS_H
-
-/*
- *  include/asm-s390/bitops.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/bitops.h"
- *    Copyright (C) 1992, Linus Torvalds
- *
- */
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-
-/*
- * 32 bit bitops format:
- * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
- * bit 32 is the LSB of *(addr+4). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- *
- * 64 bit bitops format:
- * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
- * bit 64 is the LSB of *(addr+8). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
- *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
- *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
- *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- */
-
-/* bitmap tables from arch/S390/kernel/bitmap.S */
-extern const char _oi_bitmap[];
-extern const char _ni_bitmap[];
-extern const char _zb_findmap[];
-extern const char _sb_findmap[];
-
-#ifndef __s390x__
-
-#define __BITOPS_ALIGN		3
-#define __BITOPS_WORDSIZE	32
-#define __BITOPS_OR		"or"
-#define __BITOPS_AND		"nr"
-#define __BITOPS_XOR		"xr"
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	l	%0,%2\n"			\
-		"0:	lr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	cs	%0,%1,%2\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
-
-#else /* __GNUC__ */
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	l	%0,0(%4)\n"			\
-		"0:	lr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	cs	%0,%1,0(%4)\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=m" (*(unsigned long *) __addr)		\
-		: "d" (__val), "a" (__addr),			\
-		  "m" (*(unsigned long *) __addr) : "cc");
-
-#endif /* __GNUC__ */
-
-#else /* __s390x__ */
-
-#define __BITOPS_ALIGN		7
-#define __BITOPS_WORDSIZE	64
-#define __BITOPS_OR		"ogr"
-#define __BITOPS_AND		"ngr"
-#define __BITOPS_XOR		"xgr"
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	lg	%0,%2\n"			\
-		"0:	lgr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	csg	%0,%1,%2\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
-
-#else /* __GNUC__ */
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	lg	%0,0(%4)\n"			\
-		"0:	lgr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	csg	%0,%1,0(%4)\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=m" (*(unsigned long *) __addr)		\
-		: "d" (__val), "a" (__addr),			\
-		  "m" (*(unsigned long *) __addr) : "cc");
-
-
-#endif /* __GNUC__ */
-
-#endif /* __s390x__ */
-
-#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE)
-#define __BITOPS_BARRIER() asm volatile("" : : : "memory")
-
-#ifdef CONFIG_SMP
-/*
- * SMP safe set_bit routine based on compare and swap (CS)
- */
-static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make OR mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
-}
-
-/*
- * SMP safe clear_bit routine based on compare and swap (CS)
- */
-static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make AND mask */
-	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
-}
-
-/*
- * SMP safe change_bit routine based on compare and swap (CS)
- */
-static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make XOR mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
-}
-
-/*
- * SMP safe test_and_set_bit routine based on compare and swap (CS)
- */
-static inline int
-test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make OR/test mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
-	__BITOPS_BARRIER();
-	return (old & mask) != 0;
-}
-
-/*
- * SMP safe test_and_clear_bit routine based on compare and swap (CS)
- */
-static inline int
-test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make AND/test mask */
-	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
-	__BITOPS_BARRIER();
-	return (old ^ new) != 0;
-}
-
-/*
- * SMP safe test_and_change_bit routine based on compare and swap (CS) 
- */
-static inline int
-test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
-{
-        unsigned long addr, old, new, mask;
-
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
-	/* make XOR/test mask */
-	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
-	__BITOPS_BARRIER();
-	return (old & mask) != 0;
-}
-#endif /* CONFIG_SMP */
-
-/*
- * fast, non-SMP set_bit routine
- */
-static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	asm volatile(
-		"	oc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr) : "a" (addr),
-		  "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
-}
-
-static inline void 
-__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	*(unsigned char *) addr |= 1 << (nr & 7);
-}
-
-#define set_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_set_bit((nr),(addr)) : \
- __set_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP clear_bit routine
- */
-static inline void 
-__clear_bit(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	asm volatile(
-		"	nc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)	: "a" (addr),
-		  "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc");
-}
-
-static inline void 
-__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	*(unsigned char *) addr &= ~(1 << (nr & 7));
-}
-
-#define clear_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_clear_bit((nr),(addr)) : \
- __clear_bit((nr),(addr)) )
-
-/* 
- * fast, non-SMP change_bit routine 
- */
-static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	asm volatile(
-		"	xc	0(1,%1),0(%2)"
-		:  "=m" (*(char *) addr) : "a" (addr),
-		   "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
-}
-
-static inline void 
-__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
-{
-	unsigned long addr;
-
-	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	*(unsigned char *) addr ^= 1 << (nr & 7);
-}
-
-#define change_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_change_bit((nr),(addr)) : \
- __change_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP test_and_set_bit routine
- */
-static inline int
-test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	oc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
-	return (ch >> (nr & 7)) & 1;
-}
-#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
-
-/*
- * fast, non-SMP test_and_clear_bit routine
- */
-static inline int
-test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	nc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_ni_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
-	return (ch >> (nr & 7)) & 1;
-}
-#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
-
-/*
- * fast, non-SMP test_and_change_bit routine
- */
-static inline int
-test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	xc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
-	return (ch >> (nr & 7)) & 1;
-}
-#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
-
-#ifdef CONFIG_SMP
-#define set_bit             set_bit_cs
-#define clear_bit           clear_bit_cs
-#define change_bit          change_bit_cs
-#define test_and_set_bit    test_and_set_bit_cs
-#define test_and_clear_bit  test_and_clear_bit_cs
-#define test_and_change_bit test_and_change_bit_cs
-#else
-#define set_bit             set_bit_simple
-#define clear_bit           clear_bit_simple
-#define change_bit          change_bit_simple
-#define test_and_set_bit    test_and_set_bit_simple
-#define test_and_clear_bit  test_and_clear_bit_simple
-#define test_and_change_bit test_and_change_bit_simple
-#endif
-
-
-/*
- * This routine doesn't need to be atomic.
- */
-
-static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
-{
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
-	ch = *(volatile unsigned char *) addr;
-	return (ch >> (nr & 7)) & 1;
-}
-
-static inline int 
-__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
-    return (((volatile char *) addr)
-	    [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)) )
-
-/*
- * Optimized find bit helper functions.
- */
-
-/**
- * __ffz_word_loop - find byte offset of first long != -1UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
- */
-static inline unsigned long __ffz_word_loop(const unsigned long *addr,
-					    unsigned long size)
-{
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
-
-	asm volatile(
-#ifndef __s390x__
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&d" (size)
-		: "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
-}
-
-/**
- * __ffs_word_loop - find byte offset of first long != 0UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
- */
-static inline unsigned long __ffs_word_loop(const unsigned long *addr,
-					    unsigned long size)
-{
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
-
-	asm volatile(
-#ifndef __s390x__
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&a" (size)
-		: "d" (0UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
-}
-
-/**
- * __ffz_word - add number of the first unset bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for unset bits
- */
-static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
-{
-#ifdef __s390x__
-	if (likely((word & 0xffffffff) == 0xffffffff)) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if (likely((word & 0xffff) == 0xffff)) {
-		word >>= 16;
-		nr += 16;
-	}
-	if (likely((word & 0xff) == 0xff)) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _zb_findmap[(unsigned char) word];
-}
-
-/**
- * __ffs_word - add number of the first set bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for set bits
- */
-static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
-{
-#ifdef __s390x__
-	if (likely((word & 0xffffffff) == 0)) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if (likely((word & 0xffff) == 0)) {
-		word >>= 16;
-		nr += 16;
-	}
-	if (likely((word & 0xff) == 0)) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _sb_findmap[(unsigned char) word];
-}
-
-
-/**
- * __load_ulong_be - load big endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_be(const unsigned long *p,
-					    unsigned long offset)
-{
-	p = (unsigned long *)((unsigned long) p + offset);
-	return *p;
-}
-
-/**
- * __load_ulong_le - load little endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_le(const unsigned long *p,
-					    unsigned long offset)
-{
-	unsigned long word;
-
-	p = (unsigned long *)((unsigned long) p + offset);
-#ifndef __s390x__
-	asm volatile(
-		"	ic	%0,0(%1)\n"
-		"	icm	%0,2,1(%1)\n"
-		"	icm	%0,4,2(%1)\n"
-		"	icm	%0,8,3(%1)"
-		: "=&d" (word) : "a" (p), "m" (*p) : "cc");
-#else
-	asm volatile(
-		"	lrvg	%0,%1"
-		: "=d" (word) : "m" (*p) );
-#endif
-	return word;
-}
-
-/*
- * The various find bit functions.
- */
-
-/*
- * ffz - find first zero in word.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static inline unsigned long ffz(unsigned long word)
-{
-	return __ffz_word(0, word);
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs (unsigned long word)
-{
-	return __ffs_word(0, word);
-}
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static inline int ffs(int x)
-{
-	if (!x)
-		return 0;
-	return __ffs_word(1, x);
-}
-
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-static inline unsigned long find_first_zero_bit(const unsigned long *addr,
-						unsigned long size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(addr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-static inline unsigned long find_first_bit(const unsigned long * addr,
-					   unsigned long size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffs_word_loop(addr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline int find_next_zero_bit (const unsigned long * addr,
-				      unsigned long size,
-				      unsigned long offset)
-{
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-	if (bit) {
-		/*
-		 * __ffz_word returns __BITOPS_WORDSIZE
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffz_word(0, *p >> bit) + bit;
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-	}
-	return offset + find_first_zero_bit(p, size);
-}
-
-/**
- * find_next_bit - find the first set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline int find_next_bit (const unsigned long * addr,
-				 unsigned long size,
-				 unsigned long offset)
-{
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-	if (bit) {
-		/*
-		 * __ffs_word returns __BITOPS_WORDSIZE
-		 * if no one bit is present in the word.
-		 */
-		set = __ffs_word(0, *p & (~0UL << bit));
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-	}
-	return offset + find_first_bit(p, size);
-}
-
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(unsigned long *b)
-{
-	return find_first_bit(b, 140);
-}
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-/*
- * ATTENTION: intel byte ordering convention for ext2 and minix !!
- * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
- * bit 32 is the LSB of (addr+4).
- * That combined with the little endian byte order of Intel gives the
- * following bit order in memory:
- *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
- *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
- */
-
-#define ext2_set_bit(nr, addr)       \
-	__test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_set_bit_atomic(lock, nr, addr)       \
-	test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr)     \
-	__test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_clear_bit_atomic(lock, nr, addr)     \
-	test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-#define ext2_test_bit(nr, addr)      \
-	test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
-
-static inline int ext2_find_first_zero_bit(void *vaddr, unsigned int size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(vaddr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size,
-					  unsigned long offset)
-{
-        unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-        if (offset >= size)
-                return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-        if (bit) {
-		/*
-		 * s390 version of ffz returns __BITOPS_WORDSIZE
-		 * if no zero bit is present in the word.
-		 */
-		set = ffz(__load_ulong_le(p, 0) >> bit) + bit;
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-        }
-	return offset + ext2_find_first_zero_bit(p, size);
-}
-
-static inline unsigned long ext2_find_first_bit(void *vaddr,
-						unsigned long size)
-{
-	unsigned long bytes, bits;
-
-	if (!size)
-		return 0;
-	bytes = __ffs_word_loop(vaddr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-static inline int ext2_find_next_bit(void *vaddr, unsigned long size,
-				     unsigned long offset)
-{
-	unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (__BITOPS_WORDSIZE - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / __BITOPS_WORDSIZE;
-	if (bit) {
-		/*
-		 * s390 version of ffz returns __BITOPS_WORDSIZE
-		 * if no zero bit is present in the word.
-		 */
-		set = ffs(__load_ulong_le(p, 0) >> bit) + bit;
-		if (set >= size)
-			return size + offset;
-		if (set < __BITOPS_WORDSIZE)
-			return set + offset;
-		offset += __BITOPS_WORDSIZE;
-		size -= __BITOPS_WORDSIZE;
-		p++;
-	}
-	return offset + ext2_find_first_bit(p, size);
-}
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _S390_BITOPS_H */
diff --git a/include/asm-s390/bug.h b/include/asm-s390/bug.h
deleted file mode 100644
index 384e3621e341..000000000000
--- a/include/asm-s390/bug.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _ASM_S390_BUG_H
-#define _ASM_S390_BUG_H
-
-#include <linux/kernel.h>
-
-#ifdef CONFIG_BUG
-
-#ifdef CONFIG_64BIT
-#define S390_LONG ".quad"
-#else
-#define S390_LONG ".long"
-#endif
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-
-#define __EMIT_BUG(x) do {					\
-	asm volatile(						\
-		"0:	j	0b+2\n"				\
-		"1:\n"						\
-		".section .rodata.str,\"aMS\",@progbits,1\n"	\
-		"2:	.asciz	\""__FILE__"\"\n"		\
-		".previous\n"					\
-		".section __bug_table,\"a\"\n"			\
-		"3:\t"	S390_LONG "\t1b,2b\n"			\
-		"	.short	%0,%1\n"			\
-		"	.org	3b+%2\n"			\
-		".previous\n"					\
-		: : "i" (__LINE__),				\
-		    "i" (x),					\
-		    "i" (sizeof(struct bug_entry)));		\
-} while (0)
-
-#else /* CONFIG_DEBUG_BUGVERBOSE */
-
-#define __EMIT_BUG(x) do {				\
-	asm volatile(					\
-		"0:	j	0b+2\n"			\
-		"1:\n"					\
-		".section __bug_table,\"a\"\n"		\
-		"2:\t"	S390_LONG "\t1b\n"		\
-		"	.short	%0\n"			\
-		"	.org	2b+%1\n"		\
-		".previous\n"				\
-		: : "i" (x),				\
-		    "i" (sizeof(struct bug_entry)));	\
-} while (0)
-
-#endif /* CONFIG_DEBUG_BUGVERBOSE */
-
-#define BUG()	__EMIT_BUG(0)
-
-#define WARN_ON(x) ({					\
-	int __ret_warn_on = !!(x);			\
-	if (__builtin_constant_p(__ret_warn_on)) {	\
-		if (__ret_warn_on)			\
-			__EMIT_BUG(BUGFLAG_WARNING);	\
-	} else {					\
-		if (unlikely(__ret_warn_on))		\
-			__EMIT_BUG(BUGFLAG_WARNING);	\
-	}						\
-	unlikely(__ret_warn_on);			\
-})
-
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_WARN_ON
-#endif /* CONFIG_BUG */
-
-#include <asm-generic/bug.h>
-
-#endif /* _ASM_S390_BUG_H */
diff --git a/include/asm-s390/bugs.h b/include/asm-s390/bugs.h
deleted file mode 100644
index 011f1e6a2a6c..000000000000
--- a/include/asm-s390/bugs.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  include/asm-s390/bugs.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/bugs.h"
- *    Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *      void check_bugs(void);
- */
-
-static inline void check_bugs(void)
-{
-  /* s390 has no bugs ... */
-}
diff --git a/include/asm-s390/byteorder.h b/include/asm-s390/byteorder.h
deleted file mode 100644
index 1fe2492baa8d..000000000000
--- a/include/asm-s390/byteorder.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef _S390_BYTEORDER_H
-#define _S390_BYTEORDER_H
-
-/*
- *  include/asm-s390/byteorder.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- */
-
-#include <asm/types.h>
-
-#ifdef __GNUC__
-
-#ifdef __s390x__
-static inline __u64 ___arch__swab64p(const __u64 *x)
-{
-	__u64 result;
-
-	asm volatile("lrvg %0,%1" : "=d" (result) : "m" (*x));
-	return result;
-}
-
-static inline __u64 ___arch__swab64(__u64 x)
-{
-	__u64 result;
-
-	asm volatile("lrvgr %0,%1" : "=d" (result) : "d" (x));
-	return result;
-}
-
-static inline void ___arch__swab64s(__u64 *x)
-{
-	*x = ___arch__swab64p(x);
-}
-#endif /* __s390x__ */
-
-static inline __u32 ___arch__swab32p(const __u32 *x)
-{
-	__u32 result;
-	
-	asm volatile(
-#ifndef __s390x__
-		"	icm	%0,8,3(%1)\n"
-		"	icm	%0,4,2(%1)\n"
-		"	icm	%0,2,1(%1)\n"
-		"	ic	%0,0(%1)"
-		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
-#else /* __s390x__ */
-		"	lrv	%0,%1"
-		: "=d" (result) : "m" (*x));
-#endif /* __s390x__ */
-	return result;
-}
-
-static inline __u32 ___arch__swab32(__u32 x)
-{
-#ifndef __s390x__
-	return ___arch__swab32p(&x);
-#else /* __s390x__ */
-	__u32 result;
-	
-	asm volatile("lrvr  %0,%1" : "=d" (result) : "d" (x));
-	return result;
-#endif /* __s390x__ */
-}
-
-static __inline__ void ___arch__swab32s(__u32 *x)
-{
-	*x = ___arch__swab32p(x);
-}
-
-static __inline__ __u16 ___arch__swab16p(const __u16 *x)
-{
-	__u16 result;
-	
-	asm volatile(
-#ifndef __s390x__
-		"	icm	%0,2,1(%1)\n"
-		"	ic	%0,0(%1)\n"
-		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
-#else /* __s390x__ */
-		"	lrvh	%0,%1"
-		: "=d" (result) : "m" (*x));
-#endif /* __s390x__ */
-	return result;
-}
-
-static __inline__ __u16 ___arch__swab16(__u16 x)
-{
-	return ___arch__swab16p(&x);
-}
-
-static __inline__ void ___arch__swab16s(__u16 *x)
-{
-	*x = ___arch__swab16p(x);
-}
-
-#ifdef __s390x__
-#define __arch__swab64(x) ___arch__swab64(x)
-#define __arch__swab64p(x) ___arch__swab64p(x)
-#define __arch__swab64s(x) ___arch__swab64s(x)
-#endif /* __s390x__ */
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-#define __arch__swab32p(x) ___arch__swab32p(x)
-#define __arch__swab16p(x) ___arch__swab16p(x)
-#define __arch__swab32s(x) ___arch__swab32s(x)
-#define __arch__swab16s(x) ___arch__swab16s(x)
-
-#ifndef __s390x__
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-#else /* __s390x__ */
-#define __BYTEORDER_HAS_U64__
-#endif /* __s390x__ */
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _S390_BYTEORDER_H */
diff --git a/include/asm-s390/cache.h b/include/asm-s390/cache.h
deleted file mode 100644
index 9b866816863c..000000000000
--- a/include/asm-s390/cache.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  include/asm-s390/cache.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *
- *  Derived from "include/asm-i386/cache.h"
- *    Copyright (C) 1992, Linus Torvalds
- */
-
-#ifndef __ARCH_S390_CACHE_H
-#define __ARCH_S390_CACHE_H
-
-#define L1_CACHE_BYTES     256
-#define L1_CACHE_SHIFT     8
-
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
-#endif
diff --git a/include/asm-s390/cacheflush.h b/include/asm-s390/cacheflush.h
deleted file mode 100644
index 49d5af916d01..000000000000
--- a/include/asm-s390/cacheflush.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _S390_CACHEFLUSH_H
-#define _S390_CACHEFLUSH_H
-
-/* Keep includes the same across arches.  */
-#include <linux/mm.h>
-
-/* Caches aren't brain-dead on the s390. */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-void kernel_map_pages(struct page *page, int numpages, int enable);
-#endif
-
-#endif /* _S390_CACHEFLUSH_H */
diff --git a/include/asm-s390/ccwdev.h b/include/asm-s390/ccwdev.h
deleted file mode 100644
index ba007d8df941..000000000000
--- a/include/asm-s390/ccwdev.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- *  include/asm-s390/ccwdev.h
- *  include/asm-s390x/ccwdev.h
- *
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Arnd Bergmann <arndb@de.ibm.com>
- *
- *  Interface for CCW device drivers
- */
-#ifndef _S390_CCWDEV_H_
-#define _S390_CCWDEV_H_
-
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <asm/fcx.h>
-
-/* structs from asm/cio.h */
-struct irb;
-struct ccw1;
-struct ccw_dev_id;
-
-/* simplified initializers for struct ccw_device:
- * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one
- * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */
-#define CCW_DEVICE(cu, cum) 						\
-	.cu_type=(cu), .cu_model=(cum),					\
-	.match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE			\
-		   | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0))
-
-#define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm)				\
-	.cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\
-	.match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE			\
-		   | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) 	\
-		   | CCW_DEVICE_ID_MATCH_DEVICE_TYPE			\
-		   | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0)
-
-/* scan through an array of device ids and return the first
- * entry that matches the device.
- *
- * the array must end with an entry containing zero match_flags
- */
-static inline const struct ccw_device_id *
-ccw_device_id_match(const struct ccw_device_id *array,
-			const struct ccw_device_id *match)
-{
-	const struct ccw_device_id *id = array;
-
-	for (id = array; id->match_flags; id++) {
-		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE)
-		    && (id->cu_type != match->cu_type))
-			continue;
-
-		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL)
-		    && (id->cu_model != match->cu_model))
-			continue;
-
-		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE)
-		    && (id->dev_type != match->dev_type))
-			continue;
-
-		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL)
-		    && (id->dev_model != match->dev_model))
-			continue;
-
-		return id;
-	}
-
-	return NULL;
-}
-
-/**
- * struct ccw_device - channel attached device
- * @ccwlock: pointer to device lock
- * @id: id of this device
- * @drv: ccw driver for this device
- * @dev: embedded device structure
- * @online: online status of device
- * @handler: interrupt handler
- *
- * @handler is a member of the device rather than the driver since a driver
- * can have different interrupt handlers for different ccw devices
- * (multi-subchannel drivers).
- */
-struct ccw_device {
-	spinlock_t *ccwlock;
-/* private: */
-	struct ccw_device_private *private;	/* cio private information */
-/* public: */
-	struct ccw_device_id id;
-	struct ccw_driver *drv;
-	struct device dev;
-	int online;
-	void (*handler) (struct ccw_device *, unsigned long, struct irb *);
-};
-
-
-/**
- * struct ccw driver - device driver for channel attached devices
- * @owner: owning module
- * @ids: ids supported by this driver
- * @probe: function called on probe
- * @remove: function called on remove
- * @set_online: called when setting device online
- * @set_offline: called when setting device offline
- * @notify: notify driver of device state changes
- * @shutdown: called at device shutdown
- * @driver: embedded device driver structure
- * @name: device driver name
- */
-struct ccw_driver {
-	struct module *owner;
-	struct ccw_device_id *ids;
-	int (*probe) (struct ccw_device *);
-	void (*remove) (struct ccw_device *);
-	int (*set_online) (struct ccw_device *);
-	int (*set_offline) (struct ccw_device *);
-	int (*notify) (struct ccw_device *, int);
-	void (*shutdown) (struct ccw_device *);
-	struct device_driver driver;
-	char *name;
-};
-
-extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv,
-					      const char *bus_id);
-
-/* devices drivers call these during module load and unload.
- * When a driver is registered, its probe method is called
- * when new devices for its type pop up */
-extern int  ccw_driver_register   (struct ccw_driver *driver);
-extern void ccw_driver_unregister (struct ccw_driver *driver);
-
-struct ccw1;
-
-extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long);
-extern int ccw_device_set_options(struct ccw_device *, unsigned long);
-extern void ccw_device_clear_options(struct ccw_device *, unsigned long);
-
-/* Allow for i/o completion notification after primary interrupt status. */
-#define CCWDEV_EARLY_NOTIFICATION	0x0001
-/* Report all interrupt conditions. */
-#define CCWDEV_REPORT_ALL	 	0x0002
-/* Try to perform path grouping. */
-#define CCWDEV_DO_PATHGROUP             0x0004
-/* Allow forced onlining of boxed devices. */
-#define CCWDEV_ALLOW_FORCE              0x0008
-
-extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
-			    unsigned long, __u8, unsigned long);
-extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *,
-				    unsigned long, __u8, unsigned long, int);
-extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *,
-				unsigned long, __u8, __u8, unsigned long);
-extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *,
-					unsigned long, __u8, __u8,
-					unsigned long, int);
-
-
-extern int ccw_device_resume(struct ccw_device *);
-extern int ccw_device_halt(struct ccw_device *, unsigned long);
-extern int ccw_device_clear(struct ccw_device *, unsigned long);
-int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw,
-			    unsigned long intparm, u8 lpm, u8 key);
-int ccw_device_tm_start_key(struct ccw_device *, struct tcw *,
-			    unsigned long, u8, u8);
-int ccw_device_tm_start_timeout_key(struct ccw_device *, struct tcw *,
-			    unsigned long, u8, u8, int);
-int ccw_device_tm_start(struct ccw_device *, struct tcw *,
-			    unsigned long, u8);
-int ccw_device_tm_start_timeout(struct ccw_device *, struct tcw *,
-			    unsigned long, u8, int);
-int ccw_device_tm_intrg(struct ccw_device *cdev);
-
-extern int ccw_device_set_online(struct ccw_device *cdev);
-extern int ccw_device_set_offline(struct ccw_device *cdev);
-
-
-extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd);
-extern __u8 ccw_device_get_path_mask(struct ccw_device *);
-extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
-
-#define get_ccwdev_lock(x) (x)->ccwlock
-
-#define to_ccwdev(n) container_of(n, struct ccw_device, dev)
-#define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)
-
-extern struct ccw_device *ccw_device_probe_console(void);
-
-// FIXME: these have to go
-extern int _ccw_device_get_subchannel_number(struct ccw_device *);
-
-extern void *ccw_device_get_chp_desc(struct ccw_device *, int);
-#endif /* _S390_CCWDEV_H_ */
diff --git a/include/asm-s390/ccwgroup.h b/include/asm-s390/ccwgroup.h
deleted file mode 100644
index a27f68985a79..000000000000
--- a/include/asm-s390/ccwgroup.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef S390_CCWGROUP_H
-#define S390_CCWGROUP_H
-
-struct ccw_device;
-struct ccw_driver;
-
-/**
- * struct ccwgroup_device - ccw group device
- * @creator_id: unique number of the driver
- * @state: online/offline state
- * @count: number of attached slave devices
- * @dev: embedded device structure
- * @cdev: variable number of slave devices, allocated as needed
- */
-struct ccwgroup_device {
-	unsigned long creator_id;
-	enum {
-		CCWGROUP_OFFLINE,
-		CCWGROUP_ONLINE,
-	} state;
-/* private: */
-	atomic_t onoff;
-	struct mutex reg_mutex;
-/* public: */
-	unsigned int count;
-	struct device	dev;
-	struct ccw_device *cdev[0];
-};
-
-/**
- * struct ccwgroup_driver - driver for ccw group devices
- * @owner: driver owner
- * @name: driver name
- * @max_slaves: maximum number of slave devices
- * @driver_id: unique id
- * @probe: function called on probe
- * @remove: function called on remove
- * @set_online: function called when device is set online
- * @set_offline: function called when device is set offline
- * @shutdown: function called when device is shut down
- * @driver: embedded driver structure
- */
-struct ccwgroup_driver {
-	struct module *owner;
-	char *name;
-	int max_slaves;
-	unsigned long driver_id;
-
-	int (*probe) (struct ccwgroup_device *);
-	void (*remove) (struct ccwgroup_device *);
-	int (*set_online) (struct ccwgroup_device *);
-	int (*set_offline) (struct ccwgroup_device *);
-	void (*shutdown)(struct ccwgroup_device *);
-
-	struct device_driver driver;
-};
-
-extern int  ccwgroup_driver_register   (struct ccwgroup_driver *cdriver);
-extern void ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver);
-int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
-				struct ccw_driver *cdrv, int num_devices,
-				const char *buf);
-
-extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev);
-extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev);
-
-#define to_ccwgroupdev(x) container_of((x), struct ccwgroup_device, dev)
-#define to_ccwgroupdrv(x) container_of((x), struct ccwgroup_driver, driver)
-#endif
diff --git a/include/asm-s390/checksum.h b/include/asm-s390/checksum.h
deleted file mode 100644
index d5a8e7c1477c..000000000000
--- a/include/asm-s390/checksum.h
+++ /dev/null
@@ -1,166 +0,0 @@
-#ifndef _S390_CHECKSUM_H
-#define _S390_CHECKSUM_H
-
-/*
- *  include/asm-s390/checksum.h
- *    S390 fast network checksum routines
- *    see also arch/S390/lib/checksum.c
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Ulrich Hild        (first version)
- *               Martin Schwidefsky (heavily optimized CKSM version)
- *               D.J. Barrow        (third attempt) 
- */
-
-#include <asm/uaccess.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-static inline __wsum
-csum_partial(const void *buff, int len, __wsum sum)
-{
-	register unsigned long reg2 asm("2") = (unsigned long) buff;
-	register unsigned long reg3 asm("3") = (unsigned long) len;
-
-	asm volatile(
-		"0:	cksm	%0,%1\n"	/* do checksum on longs */
-		"	jo	0b\n"
-		: "+d" (sum), "+d" (reg2), "+d" (reg3) : : "cc", "memory");
-	return sum;
-}
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- *
- * Copy from userspace and compute checksum.  If we catch an exception
- * then zero the rest of the buffer.
- */
-static inline __wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
-                                          int len, __wsum sum,
-                                          int *err_ptr)
-{
-	int missing;
-
-	missing = copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*err_ptr = -EFAULT;
-	}
-		
-	return csum_partial(dst, len, sum);
-}
-
-
-static inline __wsum
-csum_partial_copy_nocheck (const void *src, void *dst, int len, __wsum sum)
-{
-        memcpy(dst,src,len);
-	return csum_partial(dst, len, sum);
-}
-
-/*
- *      Fold a partial checksum without adding pseudo headers
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-#ifndef __s390x__
-	register_pair rp;
-
-	asm volatile(
-		"	slr	%N1,%N1\n"	/* %0 = H L */
-		"	lr	%1,%0\n"	/* %0 = H L, %1 = H L 0 0 */
-		"	srdl	%1,16\n"	/* %0 = H L, %1 = 0 H L 0 */
-		"	alr	%1,%N1\n"	/* %0 = H L, %1 = L H L 0 */
-		"	alr	%0,%1\n"	/* %0 = H+L+C L+H */
-		"	srl	%0,16\n"	/* %0 = H+L+C */
-		: "+&d" (sum), "=d" (rp) : : "cc");
-#else /* __s390x__ */
-	asm volatile(
-		"	sr	3,3\n"		/* %0 = H*65536 + L */
-		"	lr	2,%0\n"		/* %0 = H L, 2/3 = H L / 0 0 */
-		"	srdl	2,16\n"		/* %0 = H L, 2/3 = 0 H / L 0 */
-		"	alr	2,3\n"		/* %0 = H L, 2/3 = L H / L 0 */
-		"	alr	%0,2\n"		/* %0 = H+L+C L+H */
-		"	srl	%0,16\n"	/* %0 = H+L+C */
-		: "+&d" (sum) : : "cc", "2", "3");
-#endif /* __s390x__ */
-	return (__force __sum16) ~sum;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return csum_fold(csum_partial(iph, ihl*4, 0));
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 32-bit checksum
- */
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-                   unsigned short len, unsigned short proto,
-                   __wsum sum)
-{
-	__u32 csum = (__force __u32)sum;
-
-	csum += (__force __u32)saddr;
-	if (csum < (__force __u32)saddr)
-		csum++;
-
-	csum += (__force __u32)daddr;
-	if (csum < (__force __u32)daddr)
-		csum++;
-
-	csum += len + proto;
-	if (csum < len + proto)
-		csum++;
-
-	return (__force __wsum)csum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-                  unsigned short len, unsigned short proto,
-                  __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#endif /* _S390_CHECKSUM_H */
-
-
diff --git a/include/asm-s390/chpid.h b/include/asm-s390/chpid.h
deleted file mode 100644
index dfe3c7f3439a..000000000000
--- a/include/asm-s390/chpid.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  drivers/s390/cio/chpid.h
- *
- *    Copyright IBM Corp. 2007
- *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CHPID_H
-#define _ASM_S390_CHPID_H _ASM_S390_CHPID_H
-
-#include <linux/string.h>
-#include <asm/types.h>
-
-#define __MAX_CHPID 255
-
-struct chp_id {
-	u8 reserved1;
-	u8 cssid;
-	u8 reserved2;
-	u8 id;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
-#include <asm/cio.h>
-
-static inline void chp_id_init(struct chp_id *chpid)
-{
-	memset(chpid, 0, sizeof(struct chp_id));
-}
-
-static inline int chp_id_is_equal(struct chp_id *a, struct chp_id *b)
-{
-	return (a->id == b->id) && (a->cssid == b->cssid);
-}
-
-static inline void chp_id_next(struct chp_id *chpid)
-{
-	if (chpid->id < __MAX_CHPID)
-		chpid->id++;
-	else {
-		chpid->id = 0;
-		chpid->cssid++;
-	}
-}
-
-static inline int chp_id_is_valid(struct chp_id *chpid)
-{
-	return (chpid->cssid <= __MAX_CSSID);
-}
-
-
-#define chp_id_for_each(c) \
-	for (chp_id_init(c); chp_id_is_valid(c); chp_id_next(c))
-#endif /* __KERNEL */
-
-#endif /* _ASM_S390_CHPID_H */
diff --git a/include/asm-s390/chsc.h b/include/asm-s390/chsc.h
deleted file mode 100644
index d38d0cf62d4b..000000000000
--- a/include/asm-s390/chsc.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * ioctl interface for /dev/chsc
- *
- * Copyright 2008 IBM Corp.
- * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
- */
-
-#ifndef _ASM_CHSC_H
-#define _ASM_CHSC_H
-
-#include <asm/chpid.h>
-#include <asm/schid.h>
-
-struct chsc_async_header {
-	__u16 length;
-	__u16 code;
-	__u32 cmd_dependend;
-	__u32 key : 4;
-	__u32 : 28;
-	struct subchannel_id sid;
-} __attribute__ ((packed));
-
-struct chsc_async_area {
-	struct chsc_async_header header;
-	__u8 data[PAGE_SIZE - 16 /* size of chsc_async_header */];
-} __attribute__ ((packed));
-
-
-struct chsc_response_struct {
-	__u16 length;
-	__u16 code;
-	__u32 parms;
-	__u8 data[PAGE_SIZE - 8];
-} __attribute__ ((packed));
-
-struct chsc_chp_cd {
-	struct chp_id chpid;
-	int m;
-	int fmt;
-	struct chsc_response_struct cpcb;
-};
-
-struct chsc_cu_cd {
-	__u16 cun;
-	__u8 cssid;
-	int m;
-	int fmt;
-	struct chsc_response_struct cucb;
-};
-
-struct chsc_sch_cud {
-	struct subchannel_id schid;
-	int fmt;
-	struct chsc_response_struct scub;
-};
-
-struct conf_id {
-	int m;
-	__u8 cssid;
-	__u8 ssid;
-};
-
-struct chsc_conf_info {
-	struct conf_id id;
-	int fmt;
-	struct chsc_response_struct scid;
-};
-
-struct ccl_parm_chpid {
-	int m;
-	struct chp_id chp;
-};
-
-struct ccl_parm_cssids {
-	__u8 f_cssid;
-	__u8 l_cssid;
-};
-
-struct chsc_comp_list {
-	struct {
-		enum {
-			CCL_CU_ON_CHP = 1,
-			CCL_CHP_TYPE_CAP = 2,
-			CCL_CSS_IMG = 4,
-			CCL_CSS_IMG_CONF_CHAR = 5,
-			CCL_IOP_CHP = 6,
-		} ctype;
-		int fmt;
-		struct ccl_parm_chpid chpid;
-		struct ccl_parm_cssids cssids;
-	} req;
-	struct chsc_response_struct sccl;
-};
-
-struct chsc_dcal {
-	struct {
-		enum {
-			DCAL_CSS_IID_PN = 4,
-		} atype;
-		__u32 list_parm[2];
-		int fmt;
-	} req;
-	struct chsc_response_struct sdcal;
-};
-
-struct chsc_cpd_info {
-	struct chp_id chpid;
-	int m;
-	int fmt;
-	int rfmt;
-	int c;
-	struct chsc_response_struct chpdb;
-};
-
-#define CHSC_IOCTL_MAGIC 'c'
-
-#define CHSC_START _IOWR(CHSC_IOCTL_MAGIC, 0x81, struct chsc_async_area)
-#define CHSC_INFO_CHANNEL_PATH _IOWR(CHSC_IOCTL_MAGIC, 0x82, \
-				    struct chsc_chp_cd)
-#define CHSC_INFO_CU _IOWR(CHSC_IOCTL_MAGIC, 0x83, struct chsc_cu_cd)
-#define CHSC_INFO_SCH_CU _IOWR(CHSC_IOCTL_MAGIC, 0x84, struct chsc_sch_cud)
-#define CHSC_INFO_CI _IOWR(CHSC_IOCTL_MAGIC, 0x85, struct chsc_conf_info)
-#define CHSC_INFO_CCL _IOWR(CHSC_IOCTL_MAGIC, 0x86, struct chsc_comp_list)
-#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
-#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
-
-#endif
diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h
deleted file mode 100644
index 6dccb071aec3..000000000000
--- a/include/asm-s390/cio.h
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- *  include/asm-s390/cio.h
- *  include/asm-s390x/cio.h
- *
- * Common interface for I/O on S/390
- */
-#ifndef _ASM_S390_CIO_H_
-#define _ASM_S390_CIO_H_
-
-#include <linux/spinlock.h>
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-
-#define LPM_ANYPATH 0xff
-#define __MAX_CSSID 0
-
-/**
- * struct cmd_scsw - command-mode subchannel status word
- * @key: subchannel key
- * @sctl: suspend control
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @pfch: prefetch
- * @isic: initial-status interruption control
- * @alcc: address-limit checking control
- * @ssi: suppress-suspended interruption
- * @zcc: zero condition code
- * @ectl: extended control
- * @pno: path not operational
- * @res: reserved
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @cpa: channel program address
- * @dstat: device status
- * @cstat: subchannel status
- * @count: residual count
- */
-struct cmd_scsw {
-	__u32 key  : 4;
-	__u32 sctl : 1;
-	__u32 eswf : 1;
-	__u32 cc   : 2;
-	__u32 fmt  : 1;
-	__u32 pfch : 1;
-	__u32 isic : 1;
-	__u32 alcc : 1;
-	__u32 ssi  : 1;
-	__u32 zcc  : 1;
-	__u32 ectl : 1;
-	__u32 pno  : 1;
-	__u32 res  : 1;
-	__u32 fctl : 3;
-	__u32 actl : 7;
-	__u32 stctl : 5;
-	__u32 cpa;
-	__u32 dstat : 8;
-	__u32 cstat : 8;
-	__u32 count : 16;
-} __attribute__ ((packed));
-
-/**
- * struct tm_scsw - transport-mode subchannel status word
- * @key: subchannel key
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @x: IRB-format control
- * @q: interrogate-complete
- * @ectl: extended control
- * @pno: path not operational
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @tcw: TCW address
- * @dstat: device status
- * @cstat: subchannel status
- * @fcxs: FCX status
- * @schxs: subchannel-extended status
- */
-struct tm_scsw {
-	u32 key:4;
-	u32 :1;
-	u32 eswf:1;
-	u32 cc:2;
-	u32 fmt:3;
-	u32 x:1;
-	u32 q:1;
-	u32 :1;
-	u32 ectl:1;
-	u32 pno:1;
-	u32 :1;
-	u32 fctl:3;
-	u32 actl:7;
-	u32 stctl:5;
-	u32 tcw;
-	u32 dstat:8;
-	u32 cstat:8;
-	u32 fcxs:8;
-	u32 schxs:8;
-} __attribute__ ((packed));
-
-/**
- * union scsw - subchannel status word
- * @cmd: command-mode SCSW
- * @tm: transport-mode SCSW
- */
-union scsw {
-	struct cmd_scsw cmd;
-	struct tm_scsw tm;
-} __attribute__ ((packed));
-
-int scsw_is_tm(union scsw *scsw);
-u32 scsw_key(union scsw *scsw);
-u32 scsw_eswf(union scsw *scsw);
-u32 scsw_cc(union scsw *scsw);
-u32 scsw_ectl(union scsw *scsw);
-u32 scsw_pno(union scsw *scsw);
-u32 scsw_fctl(union scsw *scsw);
-u32 scsw_actl(union scsw *scsw);
-u32 scsw_stctl(union scsw *scsw);
-u32 scsw_dstat(union scsw *scsw);
-u32 scsw_cstat(union scsw *scsw);
-int scsw_is_solicited(union scsw *scsw);
-int scsw_is_valid_key(union scsw *scsw);
-int scsw_is_valid_eswf(union scsw *scsw);
-int scsw_is_valid_cc(union scsw *scsw);
-int scsw_is_valid_ectl(union scsw *scsw);
-int scsw_is_valid_pno(union scsw *scsw);
-int scsw_is_valid_fctl(union scsw *scsw);
-int scsw_is_valid_actl(union scsw *scsw);
-int scsw_is_valid_stctl(union scsw *scsw);
-int scsw_is_valid_dstat(union scsw *scsw);
-int scsw_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_valid_key(union scsw *scsw);
-int scsw_cmd_is_valid_sctl(union scsw *scsw);
-int scsw_cmd_is_valid_eswf(union scsw *scsw);
-int scsw_cmd_is_valid_cc(union scsw *scsw);
-int scsw_cmd_is_valid_fmt(union scsw *scsw);
-int scsw_cmd_is_valid_pfch(union scsw *scsw);
-int scsw_cmd_is_valid_isic(union scsw *scsw);
-int scsw_cmd_is_valid_alcc(union scsw *scsw);
-int scsw_cmd_is_valid_ssi(union scsw *scsw);
-int scsw_cmd_is_valid_zcc(union scsw *scsw);
-int scsw_cmd_is_valid_ectl(union scsw *scsw);
-int scsw_cmd_is_valid_pno(union scsw *scsw);
-int scsw_cmd_is_valid_fctl(union scsw *scsw);
-int scsw_cmd_is_valid_actl(union scsw *scsw);
-int scsw_cmd_is_valid_stctl(union scsw *scsw);
-int scsw_cmd_is_valid_dstat(union scsw *scsw);
-int scsw_cmd_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_solicited(union scsw *scsw);
-int scsw_tm_is_valid_key(union scsw *scsw);
-int scsw_tm_is_valid_eswf(union scsw *scsw);
-int scsw_tm_is_valid_cc(union scsw *scsw);
-int scsw_tm_is_valid_fmt(union scsw *scsw);
-int scsw_tm_is_valid_x(union scsw *scsw);
-int scsw_tm_is_valid_q(union scsw *scsw);
-int scsw_tm_is_valid_ectl(union scsw *scsw);
-int scsw_tm_is_valid_pno(union scsw *scsw);
-int scsw_tm_is_valid_fctl(union scsw *scsw);
-int scsw_tm_is_valid_actl(union scsw *scsw);
-int scsw_tm_is_valid_stctl(union scsw *scsw);
-int scsw_tm_is_valid_dstat(union scsw *scsw);
-int scsw_tm_is_valid_cstat(union scsw *scsw);
-int scsw_tm_is_valid_fcxs(union scsw *scsw);
-int scsw_tm_is_valid_schxs(union scsw *scsw);
-int scsw_tm_is_solicited(union scsw *scsw);
-
-#define SCSW_FCTL_CLEAR_FUNC	 0x1
-#define SCSW_FCTL_HALT_FUNC	 0x2
-#define SCSW_FCTL_START_FUNC	 0x4
-
-#define SCSW_ACTL_SUSPENDED	 0x1
-#define SCSW_ACTL_DEVACT	 0x2
-#define SCSW_ACTL_SCHACT	 0x4
-#define SCSW_ACTL_CLEAR_PEND	 0x8
-#define SCSW_ACTL_HALT_PEND	 0x10
-#define SCSW_ACTL_START_PEND	 0x20
-#define SCSW_ACTL_RESUME_PEND	 0x40
-
-#define SCSW_STCTL_STATUS_PEND	 0x1
-#define SCSW_STCTL_SEC_STATUS	 0x2
-#define SCSW_STCTL_PRIM_STATUS	 0x4
-#define SCSW_STCTL_INTER_STATUS	 0x8
-#define SCSW_STCTL_ALERT_STATUS	 0x10
-
-#define DEV_STAT_ATTENTION	 0x80
-#define DEV_STAT_STAT_MOD	 0x40
-#define DEV_STAT_CU_END		 0x20
-#define DEV_STAT_BUSY		 0x10
-#define DEV_STAT_CHN_END	 0x08
-#define DEV_STAT_DEV_END	 0x04
-#define DEV_STAT_UNIT_CHECK	 0x02
-#define DEV_STAT_UNIT_EXCEP	 0x01
-
-#define SCHN_STAT_PCI		 0x80
-#define SCHN_STAT_INCORR_LEN	 0x40
-#define SCHN_STAT_PROG_CHECK	 0x20
-#define SCHN_STAT_PROT_CHECK	 0x10
-#define SCHN_STAT_CHN_DATA_CHK	 0x08
-#define SCHN_STAT_CHN_CTRL_CHK	 0x04
-#define SCHN_STAT_INTF_CTRL_CHK	 0x02
-#define SCHN_STAT_CHAIN_CHECK	 0x01
-
-/*
- * architectured values for first sense byte
- */
-#define SNS0_CMD_REJECT		0x80
-#define SNS_CMD_REJECT		SNS0_CMD_REJEC
-#define SNS0_INTERVENTION_REQ	0x40
-#define SNS0_BUS_OUT_CHECK	0x20
-#define SNS0_EQUIPMENT_CHECK	0x10
-#define SNS0_DATA_CHECK		0x08
-#define SNS0_OVERRUN		0x04
-#define SNS0_INCOMPL_DOMAIN	0x01
-
-/*
- * architectured values for second sense byte
- */
-#define SNS1_PERM_ERR		0x80
-#define SNS1_INV_TRACK_FORMAT	0x40
-#define SNS1_EOC		0x20
-#define SNS1_MESSAGE_TO_OPER	0x10
-#define SNS1_NO_REC_FOUND	0x08
-#define SNS1_FILE_PROTECTED	0x04
-#define SNS1_WRITE_INHIBITED	0x02
-#define SNS1_INPRECISE_END	0x01
-
-/*
- * architectured values for third sense byte
- */
-#define SNS2_REQ_INH_WRITE	0x80
-#define SNS2_CORRECTABLE	0x40
-#define SNS2_FIRST_LOG_ERR	0x20
-#define SNS2_ENV_DATA_PRESENT	0x10
-#define SNS2_INPRECISE_END	0x04
-
-/**
- * struct ccw1 - channel command word
- * @cmd_code: command code
- * @flags: flags, like IDA adressing, etc.
- * @count: byte count
- * @cda: data address
- *
- * The ccw is the basic structure to build channel programs that perform
- * operations with the device or the control unit. Only Format-1 channel
- * command words are supported.
- */
-struct ccw1 {
-	__u8  cmd_code;
-	__u8  flags;
-	__u16 count;
-	__u32 cda;
-} __attribute__ ((packed,aligned(8)));
-
-#define CCW_FLAG_DC		0x80
-#define CCW_FLAG_CC		0x40
-#define CCW_FLAG_SLI		0x20
-#define CCW_FLAG_SKIP		0x10
-#define CCW_FLAG_PCI		0x08
-#define CCW_FLAG_IDA		0x04
-#define CCW_FLAG_SUSPEND	0x02
-
-#define CCW_CMD_READ_IPL	0x02
-#define CCW_CMD_NOOP		0x03
-#define CCW_CMD_BASIC_SENSE	0x04
-#define CCW_CMD_TIC		0x08
-#define CCW_CMD_STLCK           0x14
-#define CCW_CMD_SENSE_PGID	0x34
-#define CCW_CMD_SUSPEND_RECONN	0x5B
-#define CCW_CMD_RDC		0x64
-#define CCW_CMD_RELEASE		0x94
-#define CCW_CMD_SET_PGID	0xAF
-#define CCW_CMD_SENSE_ID	0xE4
-#define CCW_CMD_DCTL		0xF3
-
-#define SENSE_MAX_COUNT		0x20
-
-/**
- * struct erw - extended report word
- * @res0: reserved
- * @auth: authorization check
- * @pvrf: path-verification-required flag
- * @cpt: channel-path timeout
- * @fsavf: failing storage address validity flag
- * @cons: concurrent sense
- * @scavf: secondary ccw address validity flag
- * @fsaf: failing storage address format
- * @scnt: sense count, if @cons == %1
- * @res16: reserved
- */
-struct erw {
-	__u32 res0  : 3;
-	__u32 auth  : 1;
-	__u32 pvrf  : 1;
-	__u32 cpt   : 1;
-	__u32 fsavf : 1;
-	__u32 cons  : 1;
-	__u32 scavf : 1;
-	__u32 fsaf  : 1;
-	__u32 scnt  : 6;
-	__u32 res16 : 16;
-} __attribute__ ((packed));
-
-/**
- * struct sublog - subchannel logout area
- * @res0: reserved
- * @esf: extended status flags
- * @lpum: last path used mask
- * @arep: ancillary report
- * @fvf: field-validity flags
- * @sacc: storage access code
- * @termc: termination code
- * @devsc: device-status check
- * @serr: secondary error
- * @ioerr: i/o-error alert
- * @seqc: sequence code
- */
-struct sublog {
-	__u32 res0  : 1;
-	__u32 esf   : 7;
-	__u32 lpum  : 8;
-	__u32 arep  : 1;
-	__u32 fvf   : 5;
-	__u32 sacc  : 2;
-	__u32 termc : 2;
-	__u32 devsc : 1;
-	__u32 serr  : 1;
-	__u32 ioerr : 1;
-	__u32 seqc  : 3;
-} __attribute__ ((packed));
-
-/**
- * struct esw0 - Format 0 Extended Status Word (ESW)
- * @sublog: subchannel logout
- * @erw: extended report word
- * @faddr: failing storage address
- * @saddr: secondary ccw address
- */
-struct esw0 {
-	struct sublog sublog;
-	struct erw erw;
-	__u32  faddr[2];
-	__u32  saddr;
-} __attribute__ ((packed));
-
-/**
- * struct esw1 - Format 1 Extended Status Word (ESW)
- * @zero0: reserved zeros
- * @lpum: last path used mask
- * @zero16: reserved zeros
- * @erw: extended report word
- * @zeros: three fullwords of zeros
- */
-struct esw1 {
-	__u8  zero0;
-	__u8  lpum;
-	__u16 zero16;
-	struct erw erw;
-	__u32 zeros[3];
-} __attribute__ ((packed));
-
-/**
- * struct esw2 - Format 2 Extended Status Word (ESW)
- * @zero0: reserved zeros
- * @lpum: last path used mask
- * @dcti: device-connect-time interval
- * @erw: extended report word
- * @zeros: three fullwords of zeros
- */
-struct esw2 {
-	__u8  zero0;
-	__u8  lpum;
-	__u16 dcti;
-	struct erw erw;
-	__u32 zeros[3];
-} __attribute__ ((packed));
-
-/**
- * struct esw3 - Format 3 Extended Status Word (ESW)
- * @zero0: reserved zeros
- * @lpum: last path used mask
- * @res: reserved
- * @erw: extended report word
- * @zeros: three fullwords of zeros
- */
-struct esw3 {
-	__u8  zero0;
-	__u8  lpum;
-	__u16 res;
-	struct erw erw;
-	__u32 zeros[3];
-} __attribute__ ((packed));
-
-/**
- * struct irb - interruption response block
- * @scsw: subchannel status word
- * @esw: extened status word, 4 formats
- * @ecw: extended control word
- *
- * The irb that is handed to the device driver when an interrupt occurs. For
- * solicited interrupts, the common I/O layer already performs checks whether
- * a field is valid; a field not being valid is always passed as %0.
- * If a unit check occured, @ecw may contain sense data; this is retrieved
- * by the common I/O layer itself if the device doesn't support concurrent
- * sense (so that the device driver never needs to perform basic sene itself).
- * For unsolicited interrupts, the irb is passed as-is (expect for sense data,
- * if applicable).
- */
-struct irb {
-	union scsw scsw;
-	union {
-		struct esw0 esw0;
-		struct esw1 esw1;
-		struct esw2 esw2;
-		struct esw3 esw3;
-	} esw;
-	__u8   ecw[32];
-} __attribute__ ((packed,aligned(4)));
-
-/**
- * struct ciw - command information word  (CIW) layout
- * @et: entry type
- * @reserved: reserved bits
- * @ct: command type
- * @cmd: command code
- * @count: command count
- */
-struct ciw {
-	__u32 et       :  2;
-	__u32 reserved :  2;
-	__u32 ct       :  4;
-	__u32 cmd      :  8;
-	__u32 count    : 16;
-} __attribute__ ((packed));
-
-#define CIW_TYPE_RCD	0x0    	/* read configuration data */
-#define CIW_TYPE_SII	0x1    	/* set interface identifier */
-#define CIW_TYPE_RNI	0x2    	/* read node identifier */
-
-/*
- * Flags used as input parameters for do_IO()
- */
-#define DOIO_ALLOW_SUSPEND	 0x0001 /* allow for channel prog. suspend */
-#define DOIO_DENY_PREFETCH	 0x0002 /* don't allow for CCW prefetch */
-#define DOIO_SUPPRESS_INTER	 0x0004 /* suppress intermediate inter. */
-					/* ... for suspended CCWs */
-/* Device or subchannel gone. */
-#define CIO_GONE       0x0001
-/* No path to device. */
-#define CIO_NO_PATH    0x0002
-/* Device has appeared. */
-#define CIO_OPER       0x0004
-/* Sick revalidation of device. */
-#define CIO_REVALIDATE 0x0008
-
-/**
- * struct ccw_dev_id - unique identifier for ccw devices
- * @ssid: subchannel set id
- * @devno: device number
- *
- * This structure is not directly based on any hardware structure. The
- * hardware identifies a device by its device number and its subchannel,
- * which is in turn identified by its id. In order to get a unique identifier
- * for ccw devices across subchannel sets, @struct ccw_dev_id has been
- * introduced.
- */
-struct ccw_dev_id {
-	u8 ssid;
-	u16 devno;
-};
-
-/**
- * ccw_device_id_is_equal() - compare two ccw_dev_ids
- * @dev_id1: a ccw_dev_id
- * @dev_id2: another ccw_dev_id
- * Returns:
- *  %1 if the two structures are equal field-by-field,
- *  %0 if not.
- * Context:
- *  any
- */
-static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1,
-				      struct ccw_dev_id *dev_id2)
-{
-	if ((dev_id1->ssid == dev_id2->ssid) &&
-	    (dev_id1->devno == dev_id2->devno))
-		return 1;
-	return 0;
-}
-
-extern void wait_cons_dev(void);
-
-extern void css_schedule_reprobe(void);
-
-extern void reipl_ccw_dev(struct ccw_dev_id *id);
-
-struct cio_iplinfo {
-	u16 devno;
-	int is_qdio;
-};
-
-extern int cio_get_iplinfo(struct cio_iplinfo *iplinfo);
-
-/* Function from drivers/s390/cio/chsc.c */
-int chsc_sstpc(void *page, unsigned int op, u16 ctrl);
-int chsc_sstpi(void *page, void *result, size_t size);
-
-#endif
-
-#endif
diff --git a/include/asm-s390/cmb.h b/include/asm-s390/cmb.h
deleted file mode 100644
index 50196857d27a..000000000000
--- a/include/asm-s390/cmb.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef S390_CMB_H
-#define S390_CMB_H
-/**
- * struct cmbdata - channel measurement block data for user space
- * @size: size of the stored data
- * @elapsed_time: time since last sampling
- * @ssch_rsch_count: number of ssch and rsch
- * @sample_count: number of samples
- * @device_connect_time: time of device connect
- * @function_pending_time: time of function pending
- * @device_disconnect_time: time of device disconnect
- * @control_unit_queuing_time: time of control unit queuing
- * @device_active_only_time: time of device active only
- * @device_busy_time: time of device busy (ext. format)
- * @initial_command_response_time: initial command response time (ext. format)
- *
- * All values are stored as 64 bit for simplicity, especially
- * in 32 bit emulation mode. All time values are normalized to
- * nanoseconds.
- * Currently, two formats are known, which differ by the size of
- * this structure, i.e. the last two members are only set when
- * the extended channel measurement facility (first shipped in
- * z990 machines) is activated.
- * Potentially, more fields could be added, which would result in a
- * new ioctl number.
- */
-struct cmbdata {
-	__u64 size;
-	__u64 elapsed_time;
- /* basic and exended format: */
-	__u64 ssch_rsch_count;
-	__u64 sample_count;
-	__u64 device_connect_time;
-	__u64 function_pending_time;
-	__u64 device_disconnect_time;
-	__u64 control_unit_queuing_time;
-	__u64 device_active_only_time;
- /* extended format only: */
-	__u64 device_busy_time;
-	__u64 initial_command_response_time;
-};
-
-/* enable channel measurement */
-#define BIODASDCMFENABLE	_IO(DASD_IOCTL_LETTER, 32)
-/* enable channel measurement */
-#define BIODASDCMFDISABLE	_IO(DASD_IOCTL_LETTER, 33)
-/* read channel measurement data */
-#define BIODASDREADALLCMB	_IOWR(DASD_IOCTL_LETTER, 33, struct cmbdata)
-
-#ifdef __KERNEL__
-struct ccw_device;
-extern int enable_cmf(struct ccw_device *cdev);
-extern int disable_cmf(struct ccw_device *cdev);
-extern u64 cmf_read(struct ccw_device *cdev, int index);
-extern int cmf_readall(struct ccw_device *cdev, struct cmbdata *data);
-
-#endif /* __KERNEL__ */
-#endif /* S390_CMB_H */
diff --git a/include/asm-s390/compat.h b/include/asm-s390/compat.h
deleted file mode 100644
index de065b32381a..000000000000
--- a/include/asm-s390/compat.h
+++ /dev/null
@@ -1,233 +0,0 @@
-#ifndef _ASM_S390X_COMPAT_H
-#define _ASM_S390X_COMPAT_H
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-#include <linux/sched.h>
-
-#define PSW32_MASK_PER		0x40000000UL
-#define PSW32_MASK_DAT		0x04000000UL
-#define PSW32_MASK_IO		0x02000000UL
-#define PSW32_MASK_EXT		0x01000000UL
-#define PSW32_MASK_KEY		0x00F00000UL
-#define PSW32_MASK_MCHECK	0x00040000UL
-#define PSW32_MASK_WAIT		0x00020000UL
-#define PSW32_MASK_PSTATE	0x00010000UL
-#define PSW32_MASK_ASC		0x0000C000UL
-#define PSW32_MASK_CC		0x00003000UL
-#define PSW32_MASK_PM		0x00000f00UL
-
-#define PSW32_ADDR_AMODE31	0x80000000UL
-#define PSW32_ADDR_INSN		0x7FFFFFFFUL
-
-#define PSW32_BASE_BITS		0x00080000UL
-
-#define PSW32_ASC_PRIMARY	0x00000000UL
-#define PSW32_ASC_ACCREG	0x00004000UL
-#define PSW32_ASC_SECONDARY	0x00008000UL
-#define PSW32_ASC_HOME		0x0000C000UL
-
-#define PSW32_MASK_MERGE(CURRENT,NEW) \
-	(((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \
-	 ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM)))
-
-extern long psw32_user_bits;
-
-#define COMPAT_USER_HZ	100
-
-typedef u32		compat_size_t;
-typedef s32		compat_ssize_t;
-typedef s32		compat_time_t;
-typedef s32		compat_clock_t;
-typedef s32		compat_pid_t;
-typedef u16		__compat_uid_t;
-typedef u16		__compat_gid_t;
-typedef u32		__compat_uid32_t;
-typedef u32		__compat_gid32_t;
-typedef u16		compat_mode_t;
-typedef u32		compat_ino_t;
-typedef u16		compat_dev_t;
-typedef s32		compat_off_t;
-typedef s64		compat_loff_t;
-typedef u16		compat_nlink_t;
-typedef u16		compat_ipc_pid_t;
-typedef s32		compat_daddr_t;
-typedef u32		compat_caddr_t;
-typedef __kernel_fsid_t	compat_fsid_t;
-typedef s32		compat_key_t;
-typedef s32		compat_timer_t;
-
-typedef s32		compat_int_t;
-typedef s32		compat_long_t;
-typedef s64		compat_s64;
-typedef u32		compat_uint_t;
-typedef u32		compat_ulong_t;
-typedef u64		compat_u64;
-
-struct compat_timespec {
-	compat_time_t	tv_sec;
-	s32		tv_nsec;
-};
-
-struct compat_timeval {
-	compat_time_t	tv_sec;
-	s32		tv_usec;
-};
-
-struct compat_stat {
-	compat_dev_t	st_dev;
-	u16		__pad1;
-	compat_ino_t	st_ino;
-	compat_mode_t	st_mode;
-	compat_nlink_t	st_nlink;
-	__compat_uid_t	st_uid;
-	__compat_gid_t	st_gid;
-	compat_dev_t	st_rdev;
-	u16		__pad2;
-	u32		st_size;
-	u32		st_blksize;
-	u32		st_blocks;
-	u32		st_atime;
-	u32		st_atime_nsec;
-	u32		st_mtime;
-	u32		st_mtime_nsec;
-	u32		st_ctime;
-	u32		st_ctime_nsec;
-	u32		__unused4;
-	u32		__unused5;
-};
-
-struct compat_flock {
-	short		l_type;
-	short		l_whence;
-	compat_off_t	l_start;
-	compat_off_t	l_len;
-	compat_pid_t	l_pid;
-};
-
-#define F_GETLK64       12
-#define F_SETLK64       13
-#define F_SETLKW64      14    
-
-struct compat_flock64 {
-	short		l_type;
-	short		l_whence;
-	compat_loff_t	l_start;
-	compat_loff_t	l_len;
-	compat_pid_t	l_pid;
-};
-
-struct compat_statfs {
-	s32		f_type;
-	s32		f_bsize;
-	s32		f_blocks;
-	s32		f_bfree;
-	s32		f_bavail;
-	s32		f_files;
-	s32		f_ffree;
-	compat_fsid_t	f_fsid;
-	s32		f_namelen;
-	s32		f_frsize;
-	s32		f_spare[6];
-};
-
-#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
-#define COMPAT_RLIM_INFINITY		0xffffffff
-
-typedef u32		compat_old_sigset_t;	/* at least 32 bits */
-
-#define _COMPAT_NSIG		64
-#define _COMPAT_NSIG_BPW	32
-
-typedef u32		compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX	0x7fffffff
-#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
-
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-typedef	u32		compat_uptr_t;
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)(uptr & 0x7fffffffUL);
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
-static inline void __user *compat_alloc_user_space(long len)
-{
-	unsigned long stack;
-
-	stack = KSTK_ESP(current);
-	if (test_thread_flag(TIF_31BIT))
-		stack &= 0x7fffffffUL;
-	return (void __user *) (stack - len);
-}
-
-struct compat_ipc64_perm {
-	compat_key_t key;
-	__compat_uid32_t uid;
-	__compat_gid32_t gid;
-	__compat_uid32_t cuid;
-	__compat_gid32_t cgid;
-	compat_mode_t mode;
-	unsigned short __pad1;
-	unsigned short seq;
-	unsigned short __pad2;
-	unsigned int __unused1;
-	unsigned int __unused2;
-};
-
-struct compat_semid64_ds {
-	struct compat_ipc64_perm sem_perm;
-	compat_time_t  sem_otime;
-	compat_ulong_t __pad1;
-	compat_time_t  sem_ctime;
-	compat_ulong_t __pad2;
-	compat_ulong_t sem_nsems;
-	compat_ulong_t __unused1;
-	compat_ulong_t __unused2;
-};
-
-struct compat_msqid64_ds {
-	struct compat_ipc64_perm msg_perm;
-	compat_time_t   msg_stime;
-	compat_ulong_t __pad1;
-	compat_time_t   msg_rtime;
-	compat_ulong_t __pad2;
-	compat_time_t   msg_ctime;
-	compat_ulong_t __pad3;
-	compat_ulong_t msg_cbytes;
-	compat_ulong_t msg_qnum;
-	compat_ulong_t msg_qbytes;
-	compat_pid_t   msg_lspid;
-	compat_pid_t   msg_lrpid;
-	compat_ulong_t __unused1;
-	compat_ulong_t __unused2;
-};
-
-struct compat_shmid64_ds {
-	struct compat_ipc64_perm shm_perm;
-	compat_size_t  shm_segsz;
-	compat_time_t  shm_atime;
-	compat_ulong_t __pad1;
-	compat_time_t  shm_dtime;
-	compat_ulong_t __pad2;
-	compat_time_t  shm_ctime;
-	compat_ulong_t __pad3;
-	compat_pid_t   shm_cpid;
-	compat_pid_t   shm_lpid;
-	compat_ulong_t shm_nattch;
-	compat_ulong_t __unused1;
-	compat_ulong_t __unused2;
-};
-#endif /* _ASM_S390X_COMPAT_H */
diff --git a/include/asm-s390/cpcmd.h b/include/asm-s390/cpcmd.h
deleted file mode 100644
index 48a9eab16429..000000000000
--- a/include/asm-s390/cpcmd.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  arch/s390/kernel/cpcmd.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Christian Borntraeger (cborntra@de.ibm.com),
- */
-
-#ifndef _ASM_S390_CPCMD_H
-#define _ASM_S390_CPCMD_H
-
-/*
- * the lowlevel function for cpcmd
- * the caller of __cpcmd has to ensure that the response buffer is below 2 GB
- */
-extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code);
-
-/*
- * cpcmd is the in-kernel interface for issuing CP commands
- *
- * cmd:		null-terminated command string, max 240 characters
- * response:	response buffer for VM's textual response
- * rlen:	size of the response buffer, cpcmd will not exceed this size
- *		but will cap the output, if its too large. Everything that
- *		did not fit into the buffer will be silently dropped
- * response_code: return pointer for VM's error code
- * return value: the size of the response. The caller can check if the buffer
- *		was large enough by comparing the return value and rlen
- * NOTE: If the response buffer is not below 2 GB, cpcmd can sleep
- */
-extern int cpcmd(const char *cmd, char *response, int rlen, int *response_code);
-
-#endif /* _ASM_S390_CPCMD_H */
diff --git a/include/asm-s390/cpu.h b/include/asm-s390/cpu.h
deleted file mode 100644
index e5a6a9ba3adf..000000000000
--- a/include/asm-s390/cpu.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  include/asm-s390/cpu.h
- *
- *    Copyright IBM Corp. 2007
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CPU_H_
-#define _ASM_S390_CPU_H_
-
-#include <linux/types.h>
-#include <linux/percpu.h>
-#include <linux/spinlock.h>
-
-struct s390_idle_data {
-	spinlock_t lock;
-	unsigned int in_idle;
-	unsigned long long idle_count;
-	unsigned long long idle_enter;
-	unsigned long long idle_time;
-};
-
-DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
-
-void s390_idle_leave(void);
-
-static inline void s390_idle_check(void)
-{
-	if ((&__get_cpu_var(s390_idle))->in_idle)
-		s390_idle_leave();
-}
-
-#endif /* _ASM_S390_CPU_H_ */
diff --git a/include/asm-s390/cputime.h b/include/asm-s390/cputime.h
deleted file mode 100644
index 133ce054fc89..000000000000
--- a/include/asm-s390/cputime.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- *  include/asm-s390/cputime.h
- *
- *  (C) Copyright IBM Corp. 2004
- *
- *  Author: Martin Schwidefsky <schwidefsky@de.ibm.com>
- */
-
-#ifndef _S390_CPUTIME_H
-#define _S390_CPUTIME_H
-
-#include <asm/div64.h>
-
-/* We want to use micro-second resolution. */
-
-typedef unsigned long long cputime_t;
-typedef unsigned long long cputime64_t;
-
-#ifndef __s390x__
-
-static inline unsigned int
-__div(unsigned long long n, unsigned int base)
-{
-	register_pair rp;
-
-	rp.pair = n >> 1;
-	asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1));
-	return rp.subreg.odd;
-}
-
-#else /* __s390x__ */
-
-static inline unsigned int
-__div(unsigned long long n, unsigned int base)
-{
-	return n / base;
-}
-
-#endif /* __s390x__ */
-
-#define cputime_zero			(0ULL)
-#define cputime_max			((~0UL >> 1) - 1)
-#define cputime_add(__a, __b)		((__a) +  (__b))
-#define cputime_sub(__a, __b)		((__a) -  (__b))
-#define cputime_div(__a, __n) ({		\
-	unsigned long long __div = (__a);	\
-	do_div(__div,__n);			\
-	__div;					\
-})
-#define cputime_halve(__a)		((__a) >> 1)
-#define cputime_eq(__a, __b)		((__a) == (__b))
-#define cputime_gt(__a, __b)		((__a) >  (__b))
-#define cputime_ge(__a, __b)		((__a) >= (__b))
-#define cputime_lt(__a, __b)		((__a) <  (__b))
-#define cputime_le(__a, __b)		((__a) <= (__b))
-#define cputime_to_jiffies(__ct)	(__div((__ct), 1000000 / HZ))
-#define cputime_to_scaled(__ct)		(__ct)
-#define jiffies_to_cputime(__hz)	((cputime_t)(__hz) * (1000000 / HZ))
-
-#define cputime64_zero			(0ULL)
-#define cputime64_add(__a, __b)		((__a) + (__b))
-#define cputime_to_cputime64(__ct)	(__ct)
-
-static inline u64
-cputime64_to_jiffies64(cputime64_t cputime)
-{
-	do_div(cputime, 1000000 / HZ);
-	return cputime;
-}
-
-/*
- * Convert cputime to milliseconds and back.
- */
-static inline unsigned int
-cputime_to_msecs(const cputime_t cputime)
-{
-	return __div(cputime, 1000);
-}
-
-static inline cputime_t
-msecs_to_cputime(const unsigned int m)
-{
-	return (cputime_t) m * 1000;
-}
-
-/*
- * Convert cputime to milliseconds and back.
- */
-static inline unsigned int
-cputime_to_secs(const cputime_t cputime)
-{
-	return __div(cputime, 1000000);
-}
-
-static inline cputime_t
-secs_to_cputime(const unsigned int s)
-{
-	return (cputime_t) s * 1000000;
-}
-
-/*
- * Convert cputime to timespec and back.
- */
-static inline cputime_t
-timespec_to_cputime(const struct timespec *value)
-{
-        return value->tv_nsec / 1000 + (u64) value->tv_sec * 1000000;
-}
-
-static inline void
-cputime_to_timespec(const cputime_t cputime, struct timespec *value)
-{
-#ifndef __s390x__
-	register_pair rp;
-
-	rp.pair = cputime >> 1;
-	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
-	value->tv_nsec = rp.subreg.even * 1000;
-	value->tv_sec = rp.subreg.odd;
-#else
-	value->tv_nsec = (cputime % 1000000) * 1000;
-	value->tv_sec = cputime / 1000000;
-#endif
-}
-
-/*
- * Convert cputime to timeval and back.
- * Since cputime and timeval have the same resolution (microseconds)
- * this is easy.
- */
-static inline cputime_t
-timeval_to_cputime(const struct timeval *value)
-{
-        return value->tv_usec + (u64) value->tv_sec * 1000000;
-}
-
-static inline void
-cputime_to_timeval(const cputime_t cputime, struct timeval *value)
-{
-#ifndef __s390x__
-	register_pair rp;
-
-	rp.pair = cputime >> 1;
-	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
-	value->tv_usec = rp.subreg.even;
-	value->tv_sec = rp.subreg.odd;
-#else
-	value->tv_usec = cputime % 1000000;
-	value->tv_sec = cputime / 1000000;
-#endif
-}
-
-/*
- * Convert cputime to clock and back.
- */
-static inline clock_t
-cputime_to_clock_t(cputime_t cputime)
-{
-	return __div(cputime, 1000000 / USER_HZ);
-}
-
-static inline cputime_t
-clock_t_to_cputime(unsigned long x)
-{
-	return (cputime_t) x * (1000000 / USER_HZ);
-}
-
-/*
- * Convert cputime64 to clock.
- */
-static inline clock_t
-cputime64_to_clock_t(cputime64_t cputime)
-{
-       return __div(cputime, 1000000 / USER_HZ);
-}
-
-#endif /* _S390_CPUTIME_H */
diff --git a/include/asm-s390/current.h b/include/asm-s390/current.h
deleted file mode 100644
index 83cf36cde2da..000000000000
--- a/include/asm-s390/current.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  include/asm-s390/current.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/current.h"
- */
-
-#ifndef _S390_CURRENT_H
-#define _S390_CURRENT_H
-
-#ifdef __KERNEL__
-#include <asm/lowcore.h>
-
-struct task_struct;
-
-#define current ((struct task_struct *const)S390_lowcore.current_task)
-
-#endif
-
-#endif /* !(_S390_CURRENT_H) */
diff --git a/include/asm-s390/dasd.h b/include/asm-s390/dasd.h
deleted file mode 100644
index 3f002e13d024..000000000000
--- a/include/asm-s390/dasd.h
+++ /dev/null
@@ -1,270 +0,0 @@
-/* 
- * File...........: linux/drivers/s390/block/dasd.c
- * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
- * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
- * This file is the interface of the DASD device driver, which is exported to user space
- * any future changes wrt the API will result in a change of the APIVERSION reported
- * to userspace by the DASDAPIVER-ioctl
- *
- */
-
-#ifndef DASD_H
-#define DASD_H
-#include <linux/ioctl.h>
-
-#define DASD_IOCTL_LETTER 'D'
-
-#define DASD_API_VERSION 6
-
-/* 
- * struct dasd_information2_t
- * represents any data about the device, which is visible to userspace.
- *  including foramt and featueres.
- */
-typedef struct dasd_information2_t {
-        unsigned int devno;         /* S/390 devno */
-        unsigned int real_devno;    /* for aliases */
-        unsigned int schid;         /* S/390 subchannel identifier */
-        unsigned int cu_type  : 16; /* from SenseID */
-        unsigned int cu_model :  8; /* from SenseID */
-        unsigned int dev_type : 16; /* from SenseID */
-        unsigned int dev_model : 8; /* from SenseID */
-        unsigned int open_count; 
-        unsigned int req_queue_len; 
-        unsigned int chanq_len;     /* length of chanq */
-        char type[4];               /* from discipline.name, 'none' for unknown */
-        unsigned int status;        /* current device level */
-        unsigned int label_block;   /* where to find the VOLSER */
-        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
-        unsigned int characteristics_size;
-        unsigned int confdata_size;
-        char characteristics[64];   /* from read_device_characteristics */
-        char configuration_data[256]; /* from read_configuration_data */
-        unsigned int format;          /* format info like formatted/cdl/ldl/... */
-        unsigned int features;        /* dasd features like 'ro',...            */
-        unsigned int reserved0;       /* reserved for further use ,...          */
-        unsigned int reserved1;       /* reserved for further use ,...          */
-        unsigned int reserved2;       /* reserved for further use ,...          */
-        unsigned int reserved3;       /* reserved for further use ,...          */
-        unsigned int reserved4;       /* reserved for further use ,...          */
-        unsigned int reserved5;       /* reserved for further use ,...          */
-        unsigned int reserved6;       /* reserved for further use ,...          */
-        unsigned int reserved7;       /* reserved for further use ,...          */
-} dasd_information2_t;
-
-/*
- * values to be used for dasd_information_t.format
- * 0x00: NOT formatted
- * 0x01: Linux disc layout
- * 0x02: Common disc layout
- */
-#define DASD_FORMAT_NONE 0
-#define DASD_FORMAT_LDL  1
-#define DASD_FORMAT_CDL  2
-/*
- * values to be used for dasd_information_t.features
- * 0x00: default features
- * 0x01: readonly (ro)
- * 0x02: use diag discipline (diag)
- * 0x04: set the device initially online (internal use only)
- * 0x08: enable ERP related logging
- */
-#define DASD_FEATURE_DEFAULT	     0x00
-#define DASD_FEATURE_READONLY	     0x01
-#define DASD_FEATURE_USEDIAG	     0x02
-#define DASD_FEATURE_INITIAL_ONLINE  0x04
-#define DASD_FEATURE_ERPLOG	     0x08
-
-#define DASD_PARTN_BITS 2
-
-/* 
- * struct dasd_information_t
- * represents any data about the data, which is visible to userspace
- */
-typedef struct dasd_information_t {
-        unsigned int devno;         /* S/390 devno */
-        unsigned int real_devno;    /* for aliases */
-        unsigned int schid;         /* S/390 subchannel identifier */
-        unsigned int cu_type  : 16; /* from SenseID */
-        unsigned int cu_model :  8; /* from SenseID */
-        unsigned int dev_type : 16; /* from SenseID */
-        unsigned int dev_model : 8; /* from SenseID */
-        unsigned int open_count; 
-        unsigned int req_queue_len; 
-        unsigned int chanq_len;     /* length of chanq */
-        char type[4];               /* from discipline.name, 'none' for unknown */
-        unsigned int status;        /* current device level */
-        unsigned int label_block;   /* where to find the VOLSER */
-        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
-        unsigned int characteristics_size;
-        unsigned int confdata_size;
-        char characteristics[64];   /* from read_device_characteristics */
-        char configuration_data[256]; /* from read_configuration_data */
-} dasd_information_t;
-
-/*
- * Read Subsystem Data - Performance Statistics
- */ 
-typedef struct dasd_rssd_perf_stats_t {
-	unsigned char  invalid:1;
-	unsigned char  format:3;
-	unsigned char  data_format:4;
-	unsigned char  unit_address;
-	unsigned short device_status;
-	unsigned int   nr_read_normal;
-	unsigned int   nr_read_normal_hits;
-	unsigned int   nr_write_normal;
-	unsigned int   nr_write_fast_normal_hits;
-	unsigned int   nr_read_seq;
-	unsigned int   nr_read_seq_hits;
-	unsigned int   nr_write_seq;
-	unsigned int   nr_write_fast_seq_hits;
-	unsigned int   nr_read_cache;
-	unsigned int   nr_read_cache_hits;
-	unsigned int   nr_write_cache;
-	unsigned int   nr_write_fast_cache_hits;
-	unsigned int   nr_inhibit_cache;
-	unsigned int   nr_bybass_cache;
-	unsigned int   nr_seq_dasd_to_cache;
-	unsigned int   nr_dasd_to_cache;
-	unsigned int   nr_cache_to_dasd;
-	unsigned int   nr_delayed_fast_write;
-	unsigned int   nr_normal_fast_write;
-	unsigned int   nr_seq_fast_write;
-	unsigned int   nr_cache_miss;
-	unsigned char  status2;
-	unsigned int   nr_quick_write_promotes;
-	unsigned char  reserved;
-	unsigned short ssid;
-	unsigned char  reseved2[96];
-} __attribute__((packed)) dasd_rssd_perf_stats_t;
-
-/* 
- * struct profile_info_t
- * holds the profinling information 
- */
-typedef struct dasd_profile_info_t {
-        unsigned int dasd_io_reqs;	 /* number of requests processed at all */
-        unsigned int dasd_io_sects;	 /* number of sectors processed at all */
-        unsigned int dasd_io_secs[32];	 /* histogram of request's sizes */
-        unsigned int dasd_io_times[32];	 /* histogram of requests's times */
-        unsigned int dasd_io_timps[32];	 /* histogram of requests's times per sector */
-        unsigned int dasd_io_time1[32];	 /* histogram of time from build to start */
-        unsigned int dasd_io_time2[32];	 /* histogram of time from start to irq */
-        unsigned int dasd_io_time2ps[32]; /* histogram of time from start to irq */
-        unsigned int dasd_io_time3[32];	 /* histogram of time from irq to end */
-        unsigned int dasd_io_nr_req[32]; /* histogram of # of requests in chanq */
-} dasd_profile_info_t;
-
-/* 
- * struct format_data_t
- * represents all data necessary to format a dasd
- */
-typedef struct format_data_t {
-	int start_unit; /* from track */
-	int stop_unit;  /* to track */
-	int blksize;    /* sectorsize */
-        int intensity;  
-} format_data_t;
-
-/*
- * values to be used for format_data_t.intensity
- * 0/8: normal format
- * 1/9: also write record zero
- * 3/11: also write home address
- * 4/12: invalidate track
- */
-#define DASD_FMT_INT_FMT_R0 1 /* write record zero */
-#define DASD_FMT_INT_FMT_HA 2 /* write home address, also set FMT_R0 ! */
-#define DASD_FMT_INT_INVAL  4 /* invalidate tracks */
-#define DASD_FMT_INT_COMPAT 8 /* use OS/390 compatible disk layout */
-
-
-/* 
- * struct attrib_data_t
- * represents the operation (cache) bits for the device.
- * Used in DE to influence caching of the DASD.
- */
-typedef struct attrib_data_t {
-	unsigned char operation:3;     /* cache operation mode */
-	unsigned char reserved:5;      /* cache operation mode */
-	__u16         nr_cyl;          /* no of cyliners for read ahaed */
-	__u8          reserved2[29];   /* for future use */
-} __attribute__ ((packed)) attrib_data_t;
-
-/* definition of operation (cache) bits within attributes of DE */
-#define DASD_NORMAL_CACHE  0x0
-#define DASD_BYPASS_CACHE  0x1
-#define DASD_INHIBIT_LOAD  0x2
-#define DASD_SEQ_ACCESS    0x3
-#define DASD_SEQ_PRESTAGE  0x4
-#define DASD_REC_ACCESS    0x5
-
-
-/********************************************************************************
- * SECTION: Definition of IOCTLs
- *
- * Here ist how the ioctl-nr should be used:
- *    0 -   31   DASD driver itself
- *   32 -  239   still open
- *  240 -  255   reserved for EMC 
- *******************************************************************************/
-
-/* Disable the volume (for Linux) */
-#define BIODASDDISABLE _IO(DASD_IOCTL_LETTER,0) 
-/* Enable the volume (for Linux) */
-#define BIODASDENABLE  _IO(DASD_IOCTL_LETTER,1)  
-/* Issue a reserve/release command, rsp. */
-#define BIODASDRSRV    _IO(DASD_IOCTL_LETTER,2) /* reserve */
-#define BIODASDRLSE    _IO(DASD_IOCTL_LETTER,3) /* release */
-#define BIODASDSLCK    _IO(DASD_IOCTL_LETTER,4) /* steal lock */
-/* reset profiling information of a device */
-#define BIODASDPRRST   _IO(DASD_IOCTL_LETTER,5)
-/* Quiesce IO on device */
-#define BIODASDQUIESCE _IO(DASD_IOCTL_LETTER,6) 
-/* Resume IO on device */
-#define BIODASDRESUME  _IO(DASD_IOCTL_LETTER,7) 
-
-
-/* retrieve API version number */
-#define DASDAPIVER     _IOR(DASD_IOCTL_LETTER,0,int)
-/* Get information on a dasd device */
-#define BIODASDINFO    _IOR(DASD_IOCTL_LETTER,1,dasd_information_t)
-/* retrieve profiling information of a device */
-#define BIODASDPRRD    _IOR(DASD_IOCTL_LETTER,2,dasd_profile_info_t)
-/* Get information on a dasd device (enhanced) */
-#define BIODASDINFO2   _IOR(DASD_IOCTL_LETTER,3,dasd_information2_t)
-/* Performance Statistics Read */
-#define BIODASDPSRD    _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t)
-/* Get Attributes (cache operations) */
-#define BIODASDGATTR   _IOR(DASD_IOCTL_LETTER,5,attrib_data_t) 
-
-
-/* #define BIODASDFORMAT  _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */
-#define BIODASDFMT     _IOW(DASD_IOCTL_LETTER,1,format_data_t) 
-/* Set Attributes (cache operations) */
-#define BIODASDSATTR   _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) 
-
-
-#endif				/* DASD_H */
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4 
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */
diff --git a/include/asm-s390/debug.h b/include/asm-s390/debug.h
deleted file mode 100644
index 9450ce6e32de..000000000000
--- a/include/asm-s390/debug.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- *  include/asm-s390/debug.h
- *   S/390 debug facility
- *
- *    Copyright (C) 1999, 2000 IBM Deutschland Entwicklung GmbH,
- *                             IBM Corporation
- */
-
-#ifndef DEBUG_H
-#define DEBUG_H
-
-#include <linux/fs.h>
-
-/* Note:
- * struct __debug_entry must be defined outside of #ifdef __KERNEL__ 
- * in order to allow a user program to analyze the 'raw'-view.
- */
-
-struct __debug_entry{
-        union {
-                struct {
-                        unsigned long long clock:52;
-                        unsigned long long exception:1;
-                        unsigned long long level:3;
-                        unsigned long long cpuid:8;
-                } fields;
-
-                unsigned long long stck;
-        } id;
-        void* caller;
-} __attribute__((packed));
-
-
-#define __DEBUG_FEATURE_VERSION      2  /* version of debug feature */
-
-#ifdef __KERNEL__
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-
-#define DEBUG_MAX_LEVEL            6  /* debug levels range from 0 to 6 */
-#define DEBUG_OFF_LEVEL            -1 /* level where debug is switched off */
-#define DEBUG_FLUSH_ALL            -1 /* parameter to flush all areas */
-#define DEBUG_MAX_VIEWS            10 /* max number of views in proc fs */
-#define DEBUG_MAX_NAME_LEN         64 /* max length for a debugfs file name */
-#define DEBUG_DEFAULT_LEVEL        3  /* initial debug level */
-
-#define DEBUG_DIR_ROOT "s390dbf" /* name of debug root directory in proc fs */
-
-#define DEBUG_DATA(entry) (char*)(entry + 1) /* data is stored behind */
-                                             /* the entry information */
-
-typedef struct __debug_entry debug_entry_t;
-
-struct debug_view;
-
-typedef struct debug_info {	
-	struct debug_info* next;
-	struct debug_info* prev;
-	atomic_t ref_count;
-	spinlock_t lock;			
-	int level;
-	int nr_areas;
-	int pages_per_area;
-	int buf_size;
-	int entry_size;	
-	debug_entry_t*** areas;
-	int active_area;
-	int *active_pages;
-	int *active_entries;
-	struct dentry* debugfs_root_entry;
-	struct dentry* debugfs_entries[DEBUG_MAX_VIEWS];
-	struct debug_view* views[DEBUG_MAX_VIEWS];	
-	char name[DEBUG_MAX_NAME_LEN];
-	mode_t mode;
-} debug_info_t;
-
-typedef int (debug_header_proc_t) (debug_info_t* id,
-				   struct debug_view* view,
-				   int area,
-				   debug_entry_t* entry,
-				   char* out_buf);
-
-typedef int (debug_format_proc_t) (debug_info_t* id,
-				   struct debug_view* view, char* out_buf,
-				   const char* in_buf);
-typedef int (debug_prolog_proc_t) (debug_info_t* id,
-				   struct debug_view* view,
-				   char* out_buf);
-typedef int (debug_input_proc_t) (debug_info_t* id,
-				  struct debug_view* view,
-				  struct file* file,
-				  const char __user *user_buf,
-				  size_t in_buf_size, loff_t* offset);
-
-int debug_dflt_header_fn(debug_info_t* id, struct debug_view* view,
-		         int area, debug_entry_t* entry, char* out_buf);						
-				
-struct debug_view {
-	char name[DEBUG_MAX_NAME_LEN];
-	debug_prolog_proc_t* prolog_proc;
-	debug_header_proc_t* header_proc;
-	debug_format_proc_t* format_proc;
-	debug_input_proc_t*  input_proc;
-	void*                private_data;
-};
-
-extern struct debug_view debug_hex_ascii_view;
-extern struct debug_view debug_raw_view;
-extern struct debug_view debug_sprintf_view;
-
-/* do NOT use the _common functions */
-
-debug_entry_t* debug_event_common(debug_info_t* id, int level, 
-                                  const void* data, int length);
-
-debug_entry_t* debug_exception_common(debug_info_t* id, int level, 
-                                      const void* data, int length);
-
-/* Debug Feature API: */
-
-debug_info_t *debug_register(const char *name, int pages, int nr_areas,
-                             int buf_size);
-
-debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas,
-				  int buf_size, mode_t mode, uid_t uid,
-				  gid_t gid);
-
-void debug_unregister(debug_info_t* id);
-
-void debug_set_level(debug_info_t* id, int new_level);
-
-void debug_stop_all(void);
-
-static inline debug_entry_t*
-debug_event(debug_info_t* id, int level, void* data, int length)
-{
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_event_common(id,level,data,length);
-}
-
-static inline debug_entry_t*
-debug_int_event(debug_info_t* id, int level, unsigned int tag)
-{
-        unsigned int t=tag;
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_event_common(id,level,&t,sizeof(unsigned int));
-}
-
-static inline debug_entry_t *
-debug_long_event (debug_info_t* id, int level, unsigned long tag)
-{
-        unsigned long t=tag;
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_event_common(id,level,&t,sizeof(unsigned long));
-}
-
-static inline debug_entry_t*
-debug_text_event(debug_info_t* id, int level, const char* txt)
-{
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_event_common(id,level,txt,strlen(txt));
-}
-
-extern debug_entry_t *
-debug_sprintf_event(debug_info_t* id,int level,char *string,...)
-	__attribute__ ((format(printf, 3, 4)));
-
-
-static inline debug_entry_t*
-debug_exception(debug_info_t* id, int level, void* data, int length)
-{
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_exception_common(id,level,data,length);
-}
-
-static inline debug_entry_t*
-debug_int_exception(debug_info_t* id, int level, unsigned int tag)
-{
-        unsigned int t=tag;
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_exception_common(id,level,&t,sizeof(unsigned int));
-}
-
-static inline debug_entry_t *
-debug_long_exception (debug_info_t* id, int level, unsigned long tag)
-{
-        unsigned long t=tag;
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_exception_common(id,level,&t,sizeof(unsigned long));
-}
-
-static inline debug_entry_t*
-debug_text_exception(debug_info_t* id, int level, const char* txt)
-{
-	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
-		return NULL;
-        return debug_exception_common(id,level,txt,strlen(txt));
-}
-
-
-extern debug_entry_t *
-debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
-	__attribute__ ((format(printf, 3, 4)));
-
-int debug_register_view(debug_info_t* id, struct debug_view* view);
-int debug_unregister_view(debug_info_t* id, struct debug_view* view);
-
-/*
-   define the debug levels:
-   - 0 No debugging output to console or syslog
-   - 1 Log internal errors to syslog, ignore check conditions 
-   - 2 Log internal errors and check conditions to syslog
-   - 3 Log internal errors to console, log check conditions to syslog
-   - 4 Log internal errors and check conditions to console
-   - 5 panic on internal errors, log check conditions to console
-   - 6 panic on both, internal errors and check conditions
- */
-
-#ifndef DEBUG_LEVEL
-#define DEBUG_LEVEL 4
-#endif
-
-#define INTERNAL_ERRMSG(x,y...) "E" __FILE__ "%d: " x, __LINE__, y
-#define INTERNAL_WRNMSG(x,y...) "W" __FILE__ "%d: " x, __LINE__, y
-#define INTERNAL_INFMSG(x,y...) "I" __FILE__ "%d: " x, __LINE__, y
-#define INTERNAL_DEBMSG(x,y...) "D" __FILE__ "%d: " x, __LINE__, y
-
-#if DEBUG_LEVEL > 0
-#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
-#define PRINT_INFO(x...) printk ( KERN_INFO PRINTK_HEADER x )
-#define PRINT_WARN(x...) printk ( KERN_WARNING PRINTK_HEADER x )
-#define PRINT_ERR(x...) printk ( KERN_ERR PRINTK_HEADER x )
-#define PRINT_FATAL(x...) panic ( PRINTK_HEADER x )
-#else
-#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
-#define PRINT_INFO(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
-#define PRINT_WARN(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
-#define PRINT_ERR(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
-#define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
-#endif				/* DASD_DEBUG */
-
-#undef DEBUG_MALLOC
-#ifdef DEBUG_MALLOC
-void *b;
-#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)
-#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x)
-#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b)
-#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b)
-#endif				/* DEBUG_MALLOC */
-
-#endif				/* __KERNEL__ */
-#endif				/* DEBUG_H */
diff --git a/include/asm-s390/delay.h b/include/asm-s390/delay.h
deleted file mode 100644
index 78357314c450..000000000000
--- a/include/asm-s390/delay.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  include/asm-s390/delay.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/delay.h"
- *    Copyright (C) 1993 Linus Torvalds
- *
- *  Delay routines calling functions in arch/s390/lib/delay.c
- */
- 
-#ifndef _S390_DELAY_H
-#define _S390_DELAY_H
-
-extern void __udelay(unsigned long usecs);
-extern void __delay(unsigned long loops);
-
-#define udelay(n) __udelay(n)
-
-#endif /* defined(_S390_DELAY_H) */
diff --git a/include/asm-s390/device.h b/include/asm-s390/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-s390/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-s390/diag.h b/include/asm-s390/diag.h
deleted file mode 100644
index 72b2e2f2d32d..000000000000
--- a/include/asm-s390/diag.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * s390 diagnose functions
- *
- * Copyright IBM Corp. 2007
- * Author(s): Michael Holzheu <holzheu@de.ibm.com>
- */
-
-#ifndef _ASM_S390_DIAG_H
-#define _ASM_S390_DIAG_H
-
-/*
- * Diagnose 10: Release pages
- */
-extern void diag10(unsigned long addr);
-
-/*
- * Diagnose 14: Input spool file manipulation
- */
-extern int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode);
-
-/*
- * Diagnose 210: Get information about a virtual device
- */
-struct diag210 {
-	u16 vrdcdvno;	/* device number (input) */
-	u16 vrdclen;	/* data block length (input) */
-	u8 vrdcvcla;	/* virtual device class (output) */
-	u8 vrdcvtyp;	/* virtual device type (output) */
-	u8 vrdcvsta;	/* virtual device status (output) */
-	u8 vrdcvfla;	/* virtual device flags (output) */
-	u8 vrdcrccl;	/* real device class (output) */
-	u8 vrdccrty;	/* real device type (output) */
-	u8 vrdccrmd;	/* real device model (output) */
-	u8 vrdccrft;	/* real device feature (output) */
-} __attribute__((packed, aligned(4)));
-
-extern int diag210(struct diag210 *addr);
-
-#endif /* _ASM_S390_DIAG_H */
diff --git a/include/asm-s390/div64.h b/include/asm-s390/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-s390/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-s390/dma.h b/include/asm-s390/dma.h
deleted file mode 100644
index 7425c6af6cd4..000000000000
--- a/include/asm-s390/dma.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  include/asm-s390/dma.h
- *
- *  S390 version
- */
-
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-#include <asm/io.h>		/* need byte IO */
-
-#define MAX_DMA_ADDRESS         0x80000000
-
-#define free_dma(x)	do { } while (0)
-
-#endif /* _ASM_DMA_H */
diff --git a/include/asm-s390/ebcdic.h b/include/asm-s390/ebcdic.h
deleted file mode 100644
index 7f6f641d32f4..000000000000
--- a/include/asm-s390/ebcdic.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  include/asm-s390/ebcdic.h
- *    EBCDIC -> ASCII, ASCII -> EBCDIC conversion routines.
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
- */
-
-#ifndef _EBCDIC_H
-#define _EBCDIC_H
-
-#ifndef _S390_TYPES_H
-#include <types.h>
-#endif
-
-extern __u8 _ascebc_500[256];   /* ASCII -> EBCDIC 500 conversion table */
-extern __u8 _ebcasc_500[256];   /* EBCDIC 500 -> ASCII conversion table */
-extern __u8 _ascebc[256];   /* ASCII -> EBCDIC conversion table */
-extern __u8 _ebcasc[256];   /* EBCDIC -> ASCII conversion table */
-extern __u8 _ebc_tolower[256]; /* EBCDIC -> lowercase */
-extern __u8 _ebc_toupper[256]; /* EBCDIC -> uppercase */
-
-static inline void
-codepage_convert(const __u8 *codepage, volatile __u8 * addr, unsigned long nr)
-{
-	if (nr-- <= 0)
-		return;
-	asm volatile(
-		"	bras	1,1f\n"
-		"	tr	0(1,%0),0(%2)\n"
-		"0:	tr	0(256,%0),0(%2)\n"
-		"	la	%0,256(%0)\n"
-		"1:	ahi	%1,-256\n"
-		"	jnm	0b\n"
-		"	ex	%1,0(1)"
-		: "+&a" (addr), "+&a" (nr)
-		: "a" (codepage) : "cc", "memory", "1");
-}
-
-#define ASCEBC(addr,nr) codepage_convert(_ascebc, addr, nr)
-#define EBCASC(addr,nr) codepage_convert(_ebcasc, addr, nr)
-#define ASCEBC_500(addr,nr) codepage_convert(_ascebc_500, addr, nr)
-#define EBCASC_500(addr,nr) codepage_convert(_ebcasc_500, addr, nr)
-#define EBC_TOLOWER(addr,nr) codepage_convert(_ebc_tolower, addr, nr)
-#define EBC_TOUPPER(addr,nr) codepage_convert(_ebc_toupper, addr, nr)
-
-#endif
-
diff --git a/include/asm-s390/elf.h b/include/asm-s390/elf.h
deleted file mode 100644
index 3cad56923815..000000000000
--- a/include/asm-s390/elf.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  include/asm-s390/elf.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/elf.h"
- */
-
-#ifndef __ASMS390_ELF_H
-#define __ASMS390_ELF_H
-
-/* s390 relocations defined by the ABIs */
-#define R_390_NONE		0	/* No reloc.  */
-#define R_390_8			1	/* Direct 8 bit.  */
-#define R_390_12		2	/* Direct 12 bit.  */
-#define R_390_16		3	/* Direct 16 bit.  */
-#define R_390_32		4	/* Direct 32 bit.  */
-#define R_390_PC32		5	/* PC relative 32 bit.	*/
-#define R_390_GOT12		6	/* 12 bit GOT offset.  */
-#define R_390_GOT32		7	/* 32 bit GOT offset.  */
-#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
-#define R_390_COPY		9	/* Copy symbol at runtime.  */
-#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
-#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
-#define R_390_RELATIVE		12	/* Adjust by program base.  */
-#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
-#define R_390_GOTPC		14	/* 32 bit PC rel. offset to GOT.  */
-#define R_390_GOT16		15	/* 16 bit GOT offset.  */
-#define R_390_PC16		16	/* PC relative 16 bit.	*/
-#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
-#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
-#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
-#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
-#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
-#define R_390_64		22	/* Direct 64 bit.  */
-#define R_390_PC64		23	/* PC relative 64 bit.	*/
-#define R_390_GOT64		24	/* 64 bit GOT offset.  */
-#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
-#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
-#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
-#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
-#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
-#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
-#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
-#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
-#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
-#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
-#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
-#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
-#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code. */
-#define R_390_TLS_GDCALL	38	/* Tag for function call in general
-                                           dynamic TLS code.  */
-#define R_390_TLS_LDCALL	39	/* Tag for function call in local
-                                           dynamic TLS code.  */
-#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
-                                           thread local data.  */
-#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
-                                           thread local data.  */
-#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
-                                           block offset.  */
-#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
-                                           block offset.  */
-#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
-                                           block offset.  */
-#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
-                                           thread local data in LD code.  */
-#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
-                                           thread local data in LD code.  */
-#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
-                                           negated static TLS block offset.  */
-#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
-                                           negated static TLS block offset.  */
-#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
-                                           negated static TLS block offset.  */
-#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
-                                           static TLS block.  */
-#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
-                                           static TLS block.  */
-#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
-                                           block.  */
-#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
-                                           block.  */
-#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
-#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.  */
-#define R_390_TLS_TPOFF		56	/* Negate offset in static TLS
-                                           block.  */
-#define R_390_20		57	/* Direct 20 bit.  */
-#define R_390_GOT20		58	/* 20 bit GOT offset.  */
-#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
-#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
-					   block offset.  */
-/* Keep this the last entry.  */
-#define R_390_NUM	61
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#ifndef __s390x__
-#define ELF_CLASS	ELFCLASS32
-#else /* __s390x__ */
-#define ELF_CLASS	ELFCLASS64
-#endif /* __s390x__ */
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_S390
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef s390_fp_regs elf_fpregset_t;
-typedef s390_regs elf_gregset_t;
-
-typedef s390_fp_regs compat_elf_fpregset_t;
-typedef s390_compat_regs compat_elf_gregset_t;
-
-#include <linux/sched.h>	/* for task_struct */
-#include <asm/system.h>		/* for save_access_regs */
-#include <asm/mmu_context.h>
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
-	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
-         && (x)->e_ident[EI_CLASS] == ELF_CLASS) 
-#define compat_elf_check_arch(x) \
-	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
-	 && (x)->e_ident[EI_CLASS] == ELF_CLASS)
-#define compat_start_thread	start_thread31
-
-/* For SVR4/S390 the function pointer to be registered with `atexit` is
-   passed in R14. */
-#define ELF_PLAT_INIT(_r, load_addr) \
-	do { \
-		_r->gprs[14] = 0; \
-	} while (0)
-
-#define CORE_DUMP_USE_REGSET
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-#define ELF_ET_DYN_BASE		(STACK_TOP / 3 * 2)
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports. */
-
-extern unsigned long elf_hwcap;
-#define ELF_HWCAP (elf_hwcap)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM_SIZE 8
-extern char elf_platform[];
-#define ELF_PLATFORM (elf_platform)
-
-#ifndef __s390x__
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-#else /* __s390x__ */
-#define SET_PERSONALITY(ex, ibcs2)			\
-do {							\
-	if (ibcs2)					\
-		set_personality(PER_SVR4);		\
-	else if (current->personality != PER_LINUX32)	\
-		set_personality(PER_LINUX);		\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
-		set_thread_flag(TIF_31BIT);		\
-	else						\
-		clear_thread_flag(TIF_31BIT);		\
-} while (0)
-#endif /* __s390x__ */
-
-/*
- * An executable for which elf_read_implies_exec() returns TRUE will
- * have the READ_IMPLIES_EXEC personality flag set automatically.
- */
-#define elf_read_implies_exec(ex, executable_stack)	\
-({							\
-	if (current->mm->context.noexec &&		\
-	    executable_stack != EXSTACK_DISABLE_X)	\
-		disable_noexec(current->mm, current);	\
-	current->mm->context.noexec == 0;		\
-})
-
-#endif
diff --git a/include/asm-s390/emergency-restart.h b/include/asm-s390/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-s390/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-s390/errno.h b/include/asm-s390/errno.h
deleted file mode 100644
index e41d5b37c4d6..000000000000
--- a/include/asm-s390/errno.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  include/asm-s390/errno.h
- *
- *  S390 version
- *
- */
-
-#ifndef _S390_ERRNO_H
-#define _S390_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif
diff --git a/include/asm-s390/etr.h b/include/asm-s390/etr.h
deleted file mode 100644
index 80ef58c61970..000000000000
--- a/include/asm-s390/etr.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- *  include/asm-s390/etr.h
- *
- *  Copyright IBM Corp. 2006
- *  Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- */
-#ifndef __S390_ETR_H
-#define __S390_ETR_H
-
-/* ETR attachment control register */
-struct etr_eacr {
-	unsigned int e0		: 1;	/* port 0 stepping control */
-	unsigned int e1		: 1;	/* port 1 stepping control */
-	unsigned int _pad0	: 5;	/* must be 00100 */
-	unsigned int dp		: 1;	/* data port control */
-	unsigned int p0		: 1;	/* port 0 change recognition control */
-	unsigned int p1		: 1;	/* port 1 change recognition control */
-	unsigned int _pad1	: 3;	/* must be 000 */
-	unsigned int ea		: 1;	/* ETR alert control */
-	unsigned int es		: 1;	/* ETR sync check control */
-	unsigned int sl		: 1;	/* switch to local control */
-} __attribute__ ((packed));
-
-/* Port state returned by steai */
-enum etr_psc {
-	etr_psc_operational = 0,
-	etr_psc_semi_operational = 1,
-	etr_psc_protocol_error =  4,
-	etr_psc_no_symbols = 8,
-	etr_psc_no_signal = 12,
-	etr_psc_pps_mode = 13
-};
-
-/* Logical port state returned by stetr */
-enum etr_lpsc {
-	etr_lpsc_operational_step = 0,
-	etr_lpsc_operational_alt = 1,
-	etr_lpsc_semi_operational = 2,
-	etr_lpsc_protocol_error =  4,
-	etr_lpsc_no_symbol_sync = 8,
-	etr_lpsc_no_signal = 12,
-	etr_lpsc_pps_mode = 13
-};
-
-/* ETR status words */
-struct etr_esw {
-	struct etr_eacr eacr;		/* attachment control register */
-	unsigned int y		: 1;	/* stepping mode */
-	unsigned int _pad0	: 5;	/* must be 00000 */
-	unsigned int p		: 1;	/* stepping port number */
-	unsigned int q		: 1;	/* data port number */
-	unsigned int psc0	: 4;	/* port 0 state code */
-	unsigned int psc1	: 4;	/* port 1 state code */
-} __attribute__ ((packed));
-
-/* Second level data register status word */
-struct etr_slsw {
-	unsigned int vv1	: 1;	/* copy of validity bit data frame 1 */
-	unsigned int vv2	: 1;	/* copy of validity bit data frame 2 */
-	unsigned int vv3	: 1;	/* copy of validity bit data frame 3 */
-	unsigned int vv4	: 1;	/* copy of validity bit data frame 4 */
-	unsigned int _pad0	: 19;	/* must by all zeroes */
-	unsigned int n		: 1;	/* EAF port number */
-	unsigned int v1		: 1;	/* validity bit ETR data frame 1 */
-	unsigned int v2		: 1;	/* validity bit ETR data frame 2 */
-	unsigned int v3		: 1;	/* validity bit ETR data frame 3 */
-	unsigned int v4		: 1;	/* validity bit ETR data frame 4 */
-	unsigned int _pad1	: 4;	/* must be 0000 */
-} __attribute__ ((packed));
-
-/* ETR data frames */
-struct etr_edf1 {
-	unsigned int u		: 1;	/* untuned bit */
-	unsigned int _pad0	: 1;	/* must be 0 */
-	unsigned int r		: 1;	/* service request bit */
-	unsigned int _pad1	: 4;	/* must be 0000 */
-	unsigned int a		: 1;	/* time adjustment bit */
-	unsigned int net_id	: 8;	/* ETR network id */
-	unsigned int etr_id	: 8;	/* id of ETR which sends data frames */
-	unsigned int etr_pn	: 8;	/* port number of ETR output port */
-} __attribute__ ((packed));
-
-struct etr_edf2 {
-	unsigned int etv	: 32;	/* Upper 32 bits of TOD. */
-} __attribute__ ((packed));
-
-struct etr_edf3 {
-	unsigned int rc		: 8;	/* failure reason code */
-	unsigned int _pad0	: 3;	/* must be 000 */
-	unsigned int c		: 1;	/* ETR coupled bit */
-	unsigned int tc		: 4;	/* ETR type code */
-	unsigned int blto	: 8;	/* biased local time offset */
-					/* (blto - 128) * 15 = minutes */
-	unsigned int buo	: 8;	/* biased utc offset */
-					/* (buo - 128) = leap seconds */
-} __attribute__ ((packed));
-
-struct etr_edf4 {
-	unsigned int ed		: 8;	/* ETS device dependent data */
-	unsigned int _pad0	: 1;	/* must be 0 */
-	unsigned int buc	: 5;	/* biased ut1 correction */
-					/* (buc - 16) * 0.1 seconds */
-	unsigned int em		: 6;	/* ETS error magnitude */
-	unsigned int dc		: 6;	/* ETS drift code */
-	unsigned int sc		: 6;	/* ETS steering code */
-} __attribute__ ((packed));
-
-/*
- * ETR attachment information block, two formats
- * format 1 has 4 reserved words with a size of 64 bytes
- * format 2 has 16 reserved words with a size of 96 bytes
- */
-struct etr_aib {
-	struct etr_esw esw;
-	struct etr_slsw slsw;
-	unsigned long long tsp;
-	struct etr_edf1 edf1;
-	struct etr_edf2 edf2;
-	struct etr_edf3 edf3;
-	struct etr_edf4 edf4;
-	unsigned int reserved[16];
-} __attribute__ ((packed,aligned(8)));
-
-/* ETR interruption parameter */
-struct etr_irq_parm {
-	unsigned int _pad0	: 8;
-	unsigned int pc0	: 1;	/* port 0 state change */
-	unsigned int pc1	: 1;	/* port 1 state change */
-	unsigned int _pad1	: 3;
-	unsigned int eai	: 1;	/* ETR alert indication */
-	unsigned int _pad2	: 18;
-} __attribute__ ((packed));
-
-/* Query TOD offset result */
-struct etr_ptff_qto {
-	unsigned long long physical_clock;
-	unsigned long long tod_offset;
-	unsigned long long logical_tod_offset;
-	unsigned long long tod_epoch_difference;
-} __attribute__ ((packed));
-
-/* Inline assembly helper functions */
-static inline int etr_setr(struct etr_eacr *ctrl)
-{
-	int rc = -ENOSYS;
-
-	asm volatile(
-		"	.insn	s,0xb2160000,0(%2)\n"
-		"0:	la	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc) : "m" (*ctrl), "a" (ctrl));
-	return rc;
-}
-
-/* Stores a format 1 aib with 64 bytes */
-static inline int etr_stetr(struct etr_aib *aib)
-{
-	int rc = -ENOSYS;
-
-	asm volatile(
-		"	.insn	s,0xb2170000,0(%2)\n"
-		"0:	la	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc) : "m" (*aib), "a" (aib));
-	return rc;
-}
-
-/* Stores a format 2 aib with 96 bytes for specified port */
-static inline int etr_steai(struct etr_aib *aib, unsigned int func)
-{
-	register unsigned int reg0 asm("0") = func;
-	int rc = -ENOSYS;
-
-	asm volatile(
-		"	.insn	s,0xb2b30000,0(%2)\n"
-		"0:	la	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0));
-	return rc;
-}
-
-/* Function codes for the steai instruction. */
-#define ETR_STEAI_STEPPING_PORT		0x10
-#define ETR_STEAI_ALTERNATE_PORT	0x11
-#define ETR_STEAI_PORT_0		0x12
-#define ETR_STEAI_PORT_1		0x13
-
-static inline int etr_ptff(void *ptff_block, unsigned int func)
-{
-	register unsigned int reg0 asm("0") = func;
-	register unsigned long reg1 asm("1") = (unsigned long) ptff_block;
-	int rc = -ENOSYS;
-
-	asm volatile(
-		"	.word	0x0104\n"
-		"	ipm	%0\n"
-		"	srl	%0,28\n"
-		: "=d" (rc), "=m" (ptff_block)
-		: "d" (reg0), "d" (reg1), "m" (ptff_block) : "cc");
-	return rc;
-}
-
-/* Function codes for the ptff instruction. */
-#define ETR_PTFF_QAF	0x00	/* query available functions */
-#define ETR_PTFF_QTO	0x01	/* query tod offset */
-#define ETR_PTFF_QSI	0x02	/* query steering information */
-#define ETR_PTFF_ATO	0x40	/* adjust tod offset */
-#define ETR_PTFF_STO	0x41	/* set tod offset */
-#define ETR_PTFF_SFS	0x42	/* set fine steering rate */
-#define ETR_PTFF_SGS	0x43	/* set gross steering rate */
-
-/* Functions needed by the machine check handler */
-void etr_switch_to_local(void);
-void etr_sync_check(void);
-
-/* STP interruption parameter */
-struct stp_irq_parm {
-	unsigned int _pad0	: 14;
-	unsigned int tsc	: 1;	/* Timing status change */
-	unsigned int lac	: 1;	/* Link availability change */
-	unsigned int tcpc	: 1;	/* Time control parameter change */
-	unsigned int _pad2	: 15;
-} __attribute__ ((packed));
-
-#define STP_OP_SYNC	1
-#define STP_OP_CTRL	3
-
-struct stp_sstpi {
-	unsigned int rsvd0;
-	unsigned int rsvd1 : 8;
-	unsigned int stratum : 8;
-	unsigned int vbits : 16;
-	unsigned int leaps : 16;
-	unsigned int tmd : 4;
-	unsigned int ctn : 4;
-	unsigned int rsvd2 : 3;
-	unsigned int c : 1;
-	unsigned int tst : 4;
-	unsigned int tzo : 16;
-	unsigned int dsto : 16;
-	unsigned int ctrl : 16;
-	unsigned int rsvd3 : 16;
-	unsigned int tto;
-	unsigned int rsvd4;
-	unsigned int ctnid[3];
-	unsigned int rsvd5;
-	unsigned int todoff[4];
-	unsigned int rsvd6[48];
-} __attribute__ ((packed));
-
-/* Functions needed by the machine check handler */
-void stp_sync_check(void);
-void stp_island_check(void);
-
-#endif /* __S390_ETR_H */
diff --git a/include/asm-s390/extmem.h b/include/asm-s390/extmem.h
deleted file mode 100644
index 33837d756184..000000000000
--- a/include/asm-s390/extmem.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  include/asm-s390x/extmem.h
- *
- *  definitions for external memory segment support
- *  Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
- */
-
-#ifndef _ASM_S390X_DCSS_H
-#define _ASM_S390X_DCSS_H
-#ifndef __ASSEMBLY__
-
-/* possible values for segment type as returned by segment_info */
-#define SEG_TYPE_SW 0
-#define SEG_TYPE_EW 1
-#define SEG_TYPE_SR 2
-#define SEG_TYPE_ER 3
-#define SEG_TYPE_SN 4
-#define SEG_TYPE_EN 5
-#define SEG_TYPE_SC 6
-#define SEG_TYPE_EWEN 7
-
-#define SEGMENT_SHARED 0
-#define SEGMENT_EXCLUSIVE 1
-
-int segment_load (char *name, int segtype, unsigned long *addr, unsigned long *length);
-void segment_unload(char *name);
-void segment_save(char *name);
-int segment_type (char* name);
-int segment_modify_shared (char *name, int do_nonshared);
-void segment_warning(int rc, char *seg_name);
-
-#endif
-#endif
diff --git a/include/asm-s390/fb.h b/include/asm-s390/fb.h
deleted file mode 100644
index c7df38030992..000000000000
--- a/include/asm-s390/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-s390/fcntl.h b/include/asm-s390/fcntl.h
deleted file mode 100644
index 46ab12db5739..000000000000
--- a/include/asm-s390/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>
diff --git a/include/asm-s390/fcx.h b/include/asm-s390/fcx.h
deleted file mode 100644
index 8be1f3a58042..000000000000
--- a/include/asm-s390/fcx.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  Functions for assembling fcx enabled I/O control blocks.
- *
- *    Copyright IBM Corp. 2008
- *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
- */
-
-#ifndef _ASM_S390_FCX_H
-#define _ASM_S390_FCX_H _ASM_S390_FCX_H
-
-#include <linux/types.h>
-
-#define TCW_FORMAT_DEFAULT		0
-#define TCW_TIDAW_FORMAT_DEFAULT	0
-#define TCW_FLAGS_INPUT_TIDA		1 << (23 - 5)
-#define TCW_FLAGS_TCCB_TIDA		1 << (23 - 6)
-#define TCW_FLAGS_OUTPUT_TIDA		1 << (23 - 7)
-#define TCW_FLAGS_TIDAW_FORMAT(x)	((x) & 3) << (23 - 9)
-#define TCW_FLAGS_GET_TIDAW_FORMAT(x)	(((x) >> (23 - 9)) & 3)
-
-/**
- * struct tcw - Transport Control Word (TCW)
- * @format: TCW format
- * @flags: TCW flags
- * @tccbl: Transport-Command-Control-Block Length
- * @r: Read Operations
- * @w: Write Operations
- * @output: Output-Data Address
- * @input: Input-Data Address
- * @tsb: Transport-Status-Block Address
- * @tccb: Transport-Command-Control-Block Address
- * @output_count: Output Count
- * @input_count: Input Count
- * @intrg: Interrogate TCW Address
- */
-struct tcw {
-	u32 format:2;
-	u32 :6;
-	u32 flags:24;
-	u32 :8;
-	u32 tccbl:6;
-	u32 r:1;
-	u32 w:1;
-	u32 :16;
-	u64 output;
-	u64 input;
-	u64 tsb;
-	u64 tccb;
-	u32 output_count;
-	u32 input_count;
-	u32 :32;
-	u32 :32;
-	u32 :32;
-	u32 intrg;
-} __attribute__ ((packed, aligned(64)));
-
-#define TIDAW_FLAGS_LAST		1 << (7 - 0)
-#define TIDAW_FLAGS_SKIP		1 << (7 - 1)
-#define TIDAW_FLAGS_DATA_INT		1 << (7 - 2)
-#define TIDAW_FLAGS_TTIC		1 << (7 - 3)
-#define TIDAW_FLAGS_INSERT_CBC		1 << (7 - 4)
-
-/**
- * struct tidaw - Transport-Indirect-Addressing Word (TIDAW)
- * @flags: TIDAW flags. Can be an arithmetic OR of the following constants:
- * %TIDAW_FLAGS_LAST, %TIDAW_FLAGS_SKIP, %TIDAW_FLAGS_DATA_INT,
- * %TIDAW_FLAGS_TTIC, %TIDAW_FLAGS_INSERT_CBC
- * @count: Count
- * @addr: Address
- */
-struct tidaw {
-	u32 flags:8;
-	u32 :24;
-	u32 count;
-	u64 addr;
-} __attribute__ ((packed, aligned(16)));
-
-/**
- * struct tsa_iostat - I/O-Status Transport-Status Area (IO-Stat TSA)
- * @dev_time: Device Time
- * @def_time: Defer Time
- * @queue_time: Queue Time
- * @dev_busy_time: Device-Busy Time
- * @dev_act_time: Device-Active-Only Time
- * @sense: Sense Data (if present)
- */
-struct tsa_iostat {
-	u32 dev_time;
-	u32 def_time;
-	u32 queue_time;
-	u32 dev_busy_time;
-	u32 dev_act_time;
-	u8 sense[32];
-} __attribute__ ((packed));
-
-/**
- * struct tsa_ddpcs - Device-Detected-Program-Check Transport-Status Area (DDPC TSA)
- * @rc: Reason Code
- * @rcq: Reason Code Qualifier
- * @sense: Sense Data (if present)
- */
-struct tsa_ddpc {
-	u32 :24;
-	u32 rc:8;
-	u8 rcq[16];
-	u8 sense[32];
-} __attribute__ ((packed));
-
-#define TSA_INTRG_FLAGS_CU_STATE_VALID		1 << (7 - 0)
-#define TSA_INTRG_FLAGS_DEV_STATE_VALID		1 << (7 - 1)
-#define TSA_INTRG_FLAGS_OP_STATE_VALID		1 << (7 - 2)
-
-/**
- * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA)
- * @format: Format
- * @flags: Flags. Can be an arithmetic OR of the following constants:
- * %TSA_INTRG_FLAGS_CU_STATE_VALID, %TSA_INTRG_FLAGS_DEV_STATE_VALID,
- * %TSA_INTRG_FLAGS_OP_STATE_VALID
- * @cu_state: Controle-Unit State
- * @dev_state: Device State
- * @op_state: Operation State
- * @sd_info: State-Dependent Information
- * @dl_id: Device-Level Identifier
- * @dd_data: Device-Dependent Data
- */
-struct tsa_intrg {
-	u32 format:8;
-	u32 flags:8;
-	u32 cu_state:8;
-	u32 dev_state:8;
-	u32 op_state:8;
-	u32 :24;
-	u8 sd_info[12];
-	u32 dl_id;
-	u8 dd_data[28];
-} __attribute__ ((packed));
-
-#define TSB_FORMAT_NONE		0
-#define TSB_FORMAT_IOSTAT	1
-#define TSB_FORMAT_DDPC		2
-#define TSB_FORMAT_INTRG	3
-
-#define TSB_FLAGS_DCW_OFFSET_VALID	1 << (7 - 0)
-#define TSB_FLAGS_COUNT_VALID		1 << (7 - 1)
-#define TSB_FLAGS_CACHE_MISS		1 << (7 - 2)
-#define TSB_FLAGS_TIME_VALID		1 << (7 - 3)
-#define TSB_FLAGS_FORMAT(x)		((x) & 7)
-#define TSB_FORMAT(t)			((t)->flags & 7)
-
-/**
- * struct tsb - Transport-Status Block (TSB)
- * @length: Length
- * @flags: Flags. Can be an arithmetic OR of the following constants:
- * %TSB_FLAGS_DCW_OFFSET_VALID, %TSB_FLAGS_COUNT_VALID, %TSB_FLAGS_CACHE_MISS,
- * %TSB_FLAGS_TIME_VALID
- * @dcw_offset: DCW Offset
- * @count: Count
- * @tsa: Transport-Status-Area
- */
-struct tsb {
-	u32 length:8;
-	u32 flags:8;
-	u32 dcw_offset:16;
-	u32 count;
-	u32 :32;
-	union {
-		struct tsa_iostat iostat;
-		struct tsa_ddpc ddpc;
-		struct tsa_intrg intrg;
-	} __attribute__ ((packed)) tsa;
-} __attribute__ ((packed, aligned(8)));
-
-#define DCW_INTRG_FORMAT_DEFAULT	0
-
-#define DCW_INTRG_RC_UNSPECIFIED	0
-#define DCW_INTRG_RC_TIMEOUT		1
-
-#define DCW_INTRG_RCQ_UNSPECIFIED	0
-#define DCW_INTRG_RCQ_PRIMARY		1
-#define DCW_INTRG_RCQ_SECONDARY		2
-
-#define DCW_INTRG_FLAGS_MPM		1 < (7 - 0)
-#define DCW_INTRG_FLAGS_PPR		1 < (7 - 1)
-#define DCW_INTRG_FLAGS_CRIT		1 < (7 - 2)
-
-/**
- * struct dcw_intrg_data - Interrogate DCW data
- * @format: Format. Should be %DCW_INTRG_FORMAT_DEFAULT
- * @rc: Reason Code. Can be one of %DCW_INTRG_RC_UNSPECIFIED,
- * %DCW_INTRG_RC_TIMEOUT
- * @rcq: Reason Code Qualifier: Can be one of %DCW_INTRG_RCQ_UNSPECIFIED,
- * %DCW_INTRG_RCQ_PRIMARY, %DCW_INTRG_RCQ_SECONDARY
- * @lpm: Logical-Path Mask
- * @pam: Path-Available Mask
- * @pim: Path-Installed Mask
- * @timeout: Timeout
- * @flags: Flags. Can be an arithmetic OR of %DCW_INTRG_FLAGS_MPM,
- * %DCW_INTRG_FLAGS_PPR, %DCW_INTRG_FLAGS_CRIT
- * @time: Time
- * @prog_id: Program Identifier
- * @prog_data: Program-Dependent Data
- */
-struct dcw_intrg_data {
-	u32 format:8;
-	u32 rc:8;
-	u32 rcq:8;
-	u32 lpm:8;
-	u32 pam:8;
-	u32 pim:8;
-	u32 timeout:16;
-	u32 flags:8;
-	u32 :24;
-	u32 :32;
-	u64 time;
-	u64 prog_id;
-	u8  prog_data[0];
-} __attribute__ ((packed));
-
-#define DCW_FLAGS_CC		1 << (7 - 1)
-
-#define DCW_CMD_WRITE		0x01
-#define DCW_CMD_READ		0x02
-#define DCW_CMD_CONTROL		0x03
-#define DCW_CMD_SENSE		0x04
-#define DCW_CMD_SENSE_ID	0xe4
-#define DCW_CMD_INTRG		0x40
-
-/**
- * struct dcw - Device-Command Word (DCW)
- * @cmd: Command Code. Can be one of %DCW_CMD_WRITE, %DCW_CMD_READ,
- * %DCW_CMD_CONTROL, %DCW_CMD_SENSE, %DCW_CMD_SENSE_ID, %DCW_CMD_INTRG
- * @flags: Flags. Can be an arithmetic OR of %DCW_FLAGS_CC
- * @cd_count: Control-Data Count
- * @count: Count
- * @cd: Control Data
- */
-struct dcw {
-	u32 cmd:8;
-	u32 flags:8;
-	u32 :8;
-	u32 cd_count:8;
-	u32 count;
-	u8 cd[0];
-} __attribute__ ((packed));
-
-#define TCCB_FORMAT_DEFAULT	0x7f
-#define TCCB_MAX_DCW		30
-#define TCCB_MAX_SIZE		(sizeof(struct tccb_tcah) + \
-				 TCCB_MAX_DCW * sizeof(struct dcw) + \
-				 sizeof(struct tccb_tcat))
-#define TCCB_SAC_DEFAULT	0xf901
-#define TCCB_SAC_INTRG		0xf902
-
-/**
- * struct tccb_tcah - Transport-Command-Area Header (TCAH)
- * @format: Format. Should be %TCCB_FORMAT_DEFAULT
- * @tcal: Transport-Command-Area Length
- * @sac: Service-Action Code. Can be one of %TCCB_SAC_DEFAULT, %TCCB_SAC_INTRG
- * @prio: Priority
- */
-struct tccb_tcah {
-	u32 format:8;
-	u32 :24;
-	u32 :24;
-	u32 tcal:8;
-	u32 sac:16;
-	u32 :8;
-	u32 prio:8;
-	u32 :32;
-} __attribute__ ((packed));
-
-/**
- * struct tccb_tcat - Transport-Command-Area Trailer (TCAT)
- * @count: Transport Count
- */
-struct tccb_tcat {
-	u32 :32;
-	u32 count;
-} __attribute__ ((packed));
-
-/**
- * struct tccb - (partial) Transport-Command-Control Block (TCCB)
- * @tcah: TCAH
- * @tca: Transport-Command Area
- */
-struct tccb {
-	struct tccb_tcah tcah;
-	u8 tca[0];
-} __attribute__ ((packed, aligned(8)));
-
-struct tcw *tcw_get_intrg(struct tcw *tcw);
-void *tcw_get_data(struct tcw *tcw);
-struct tccb *tcw_get_tccb(struct tcw *tcw);
-struct tsb *tcw_get_tsb(struct tcw *tcw);
-
-void tcw_init(struct tcw *tcw, int r, int w);
-void tcw_finalize(struct tcw *tcw, int num_tidaws);
-
-void tcw_set_intrg(struct tcw *tcw, struct tcw *intrg_tcw);
-void tcw_set_data(struct tcw *tcw, void *data, int use_tidal);
-void tcw_set_tccb(struct tcw *tcw, struct tccb *tccb);
-void tcw_set_tsb(struct tcw *tcw, struct tsb *tsb);
-
-void tccb_init(struct tccb *tccb, size_t tccb_size, u32 sac);
-void tsb_init(struct tsb *tsb);
-struct dcw *tccb_add_dcw(struct tccb *tccb, size_t tccb_size, u8 cmd, u8 flags,
-			 void *cd, u8 cd_count, u32 count);
-struct tidaw *tcw_add_tidaw(struct tcw *tcw, int num_tidaws, u8 flags,
-			    void *addr, u32 count);
-
-#endif /* _ASM_S390_FCX_H */
diff --git a/include/asm-s390/futex.h b/include/asm-s390/futex.h
deleted file mode 100644
index 5c5d02de49e9..000000000000
--- a/include/asm-s390/futex.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ASM_S390_FUTEX_H
-#define _ASM_S390_FUTEX_H
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval, ret;
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();
-	ret = uaccess.futex_atomic_op(op, uaddr, oparg, &oldval);
-	pagefault_enable();
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr,
-						int oldval, int newval)
-{
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	return uaccess.futex_atomic_cmpxchg(uaddr, oldval, newval);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_S390_FUTEX_H */
diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h
deleted file mode 100644
index 4b7cb964ff35..000000000000
--- a/include/asm-s390/hardirq.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  include/asm-s390/hardirq.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- *
- *  Derived from "include/asm-i386/hardirq.h"
- */
-
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <asm/lowcore.h>
-
-/* irq_cpustat_t is unused currently, but could be converted
- * into a percpu variable instead of storing softirq_pending
- * on the lowcore */
-typedef struct {
-	unsigned int __softirq_pending;
-} irq_cpustat_t;
-
-#define local_softirq_pending() (S390_lowcore.softirq_pending)
-
-#define __ARCH_IRQ_STAT
-#define __ARCH_HAS_DO_SOFTIRQ
-
-#define HARDIRQ_BITS	8
-
-void clock_comparator_work(void);
-
-#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/hugetlb.h b/include/asm-s390/hugetlb.h
deleted file mode 100644
index 600a776f8f75..000000000000
--- a/include/asm-s390/hugetlb.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- *  IBM System z Huge TLB Page Support for Kernel.
- *
- *    Copyright IBM Corp. 2008
- *    Author(s): Gerald Schaefer <gerald.schaefer@de.ibm.com>
- */
-
-#ifndef _ASM_S390_HUGETLB_H
-#define _ASM_S390_HUGETLB_H
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-
-#define is_hugepage_only_range(mm, addr, len)	0
-#define hugetlb_free_pgd_range			free_pgd_range
-
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-		     pte_t *ptep, pte_t pte);
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
-{
-	if (len & ~HPAGE_MASK)
-		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
-		return -EINVAL;
-	return 0;
-}
-
-#define hugetlb_prefault_arch_hook(mm)		do { } while (0)
-
-int arch_prepare_hugepage(struct page *page);
-void arch_release_hugepage(struct page *page);
-
-static inline pte_t pte_mkhuge(pte_t pte)
-{
-	/*
-	 * PROT_NONE needs to be remapped from the pte type to the ste type.
-	 * The HW invalid bit is also different for pte and ste. The pte
-	 * invalid bit happens to be the same as the ste _SEGMENT_ENTRY_LARGE
-	 * bit, so we don't have to clear it.
-	 */
-	if (pte_val(pte) & _PAGE_INVALID) {
-		if (pte_val(pte) & _PAGE_SWT)
-			pte_val(pte) |= _HPAGE_TYPE_NONE;
-		pte_val(pte) |= _SEGMENT_ENTRY_INV;
-	}
-	/*
-	 * Clear SW pte bits SWT and SWX, there are no SW bits in a segment
-	 * table entry.
-	 */
-	pte_val(pte) &= ~(_PAGE_SWT | _PAGE_SWX);
-	/*
-	 * Also set the change-override bit because we don't need dirty bit
-	 * tracking for hugetlbfs pages.
-	 */
-	pte_val(pte) |= (_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO);
-	return pte;
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
-	pte_val(pte) |= _PAGE_RO;
-	return pte;
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
-	return (pte_val(pte) & _SEGMENT_ENTRY_INV) &&
-		!(pte_val(pte) & _SEGMENT_ENTRY_RO);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
-	pte_t pte = *ptep;
-	unsigned long mask;
-
-	if (!MACHINE_HAS_HPAGE) {
-		ptep = (pte_t *) (pte_val(pte) & _SEGMENT_ENTRY_ORIGIN);
-		if (ptep) {
-			mask = pte_val(pte) &
-				(_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO);
-			pte = pte_mkhuge(*ptep);
-			pte_val(pte) |= mask;
-		}
-	}
-	return pte;
-}
-
-static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
-{
-	pte_t pte = huge_ptep_get(ptep);
-
-	pmd_clear((pmd_t *) ptep);
-	return pte;
-}
-
-static inline void __pmd_csp(pmd_t *pmdp)
-{
-	register unsigned long reg2 asm("2") = pmd_val(*pmdp);
-	register unsigned long reg3 asm("3") = pmd_val(*pmdp) |
-					       _SEGMENT_ENTRY_INV;
-	register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5;
-
-	asm volatile(
-		"	csp %1,%3"
-		: "=m" (*pmdp)
-		: "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc");
-	pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY;
-}
-
-static inline void __pmd_idte(unsigned long address, pmd_t *pmdp)
-{
-	unsigned long sto = (unsigned long) pmdp -
-				pmd_index(address) * sizeof(pmd_t);
-
-	if (!(pmd_val(*pmdp) & _SEGMENT_ENTRY_INV)) {
-		asm volatile(
-			"	.insn	rrf,0xb98e0000,%2,%3,0,0"
-			: "=m" (*pmdp)
-			: "m" (*pmdp), "a" (sto),
-			  "a" ((address & HPAGE_MASK))
-		);
-	}
-	pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY;
-}
-
-static inline void huge_ptep_invalidate(struct mm_struct *mm,
-					unsigned long address, pte_t *ptep)
-{
-	pmd_t *pmdp = (pmd_t *) ptep;
-
-	if (!MACHINE_HAS_IDTE) {
-		__pmd_csp(pmdp);
-		if (mm->context.noexec) {
-			pmdp = get_shadow_table(pmdp);
-			__pmd_csp(pmdp);
-		}
-		return;
-	}
-
-	__pmd_idte(address, pmdp);
-	if (mm->context.noexec) {
-		pmdp = get_shadow_table(pmdp);
-		__pmd_idte(address, pmdp);
-	}
-	return;
-}
-
-#define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \
-({									    \
-	int __changed = !pte_same(huge_ptep_get(__ptep), __entry);	    \
-	if (__changed) {						    \
-		huge_ptep_invalidate((__vma)->vm_mm, __addr, __ptep);	    \
-		set_huge_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);   \
-	}								    \
-	__changed;							    \
-})
-
-#define huge_ptep_set_wrprotect(__mm, __addr, __ptep)			\
-({									\
-	pte_t __pte = huge_ptep_get(__ptep);				\
-	if (pte_write(__pte)) {						\
-		if (atomic_read(&(__mm)->mm_users) > 1 ||		\
-		    (__mm) != current->active_mm)			\
-			huge_ptep_invalidate(__mm, __addr, __ptep);	\
-		set_huge_pte_at(__mm, __addr, __ptep,			\
-				huge_pte_wrprotect(__pte));		\
-	}								\
-})
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long address, pte_t *ptep)
-{
-	huge_ptep_invalidate(vma->vm_mm, address, ptep);
-}
-
-#endif /* _ASM_S390_HUGETLB_H */
diff --git a/include/asm-s390/idals.h b/include/asm-s390/idals.h
deleted file mode 100644
index e82c10efe65a..000000000000
--- a/include/asm-s390/idals.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/* 
- * File...........: linux/include/asm-s390x/idals.h
- * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
- *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
- * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000a
- 
- * History of changes
- * 07/24/00 new file
- * 05/04/02 code restructuring.
- */
-
-#ifndef _S390_IDALS_H
-#define _S390_IDALS_H
-
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/cio.h>
-#include <asm/uaccess.h>
-
-#ifdef __s390x__
-#define IDA_SIZE_LOG 12 /* 11 for 2k , 12 for 4k */
-#else
-#define IDA_SIZE_LOG 11 /* 11 for 2k , 12 for 4k */
-#endif
-#define IDA_BLOCK_SIZE (1L<<IDA_SIZE_LOG)
-
-/*
- * Test if an address/length pair needs an idal list.
- */
-static inline int
-idal_is_needed(void *vaddr, unsigned int length)
-{
-#ifdef __s390x__
-	return ((__pa(vaddr) + length - 1) >> 31) != 0;
-#else
-	return 0;
-#endif
-}
-
-
-/*
- * Return the number of idal words needed for an address/length pair.
- */
-static inline unsigned int
-idal_nr_words(void *vaddr, unsigned int length)
-{
-#ifdef __s390x__
-	if (idal_is_needed(vaddr, length))
-		return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length + 
-			(IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
-#endif
-	return 0;
-}
-
-/*
- * Create the list of idal words for an address/length pair.
- */
-static inline unsigned long *
-idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length)
-{
-#ifdef __s390x__
-	unsigned long paddr;
-	unsigned int cidaw;
-
-	paddr = __pa(vaddr);
-	cidaw = ((paddr & (IDA_BLOCK_SIZE-1)) + length + 
-		 (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
-	*idaws++ = paddr;
-	paddr &= -IDA_BLOCK_SIZE;
-	while (--cidaw > 0) {
-		paddr += IDA_BLOCK_SIZE;
-		*idaws++ = paddr;
-	}
-#endif
-	return idaws;
-}
-
-/*
- * Sets the address of the data in CCW.
- * If necessary it allocates an IDAL and sets the appropriate flags.
- */
-static inline int
-set_normalized_cda(struct ccw1 * ccw, void *vaddr)
-{
-#ifdef __s390x__
-	unsigned int nridaws;
-	unsigned long *idal;
-
-	if (ccw->flags & CCW_FLAG_IDA)
-		return -EINVAL;
-	nridaws = idal_nr_words(vaddr, ccw->count);
-	if (nridaws > 0) {
-		idal = kmalloc(nridaws * sizeof(unsigned long),
-			       GFP_ATOMIC | GFP_DMA );
-		if (idal == NULL)
-			return -ENOMEM;
-		idal_create_words(idal, vaddr, ccw->count);
-		ccw->flags |= CCW_FLAG_IDA;
-		vaddr = idal;
-	}
-#endif
-	ccw->cda = (__u32)(unsigned long) vaddr;
-	return 0;
-}
-
-/*
- * Releases any allocated IDAL related to the CCW.
- */
-static inline void
-clear_normalized_cda(struct ccw1 * ccw)
-{
-#ifdef __s390x__
-	if (ccw->flags & CCW_FLAG_IDA) {
-		kfree((void *)(unsigned long) ccw->cda);
-		ccw->flags &= ~CCW_FLAG_IDA;
-	}
-#endif
-	ccw->cda = 0;
-}
-
-/*
- * Idal buffer extension
- */
-struct idal_buffer {
-	size_t size;
-	size_t page_order;
-	void *data[0];
-};
-
-/*
- * Allocate an idal buffer
- */
-static inline struct idal_buffer *
-idal_buffer_alloc(size_t size, int page_order)
-{
-	struct idal_buffer *ib;
-	int nr_chunks, nr_ptrs, i;
-
-	nr_ptrs = (size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
-	nr_chunks = (4096 << page_order) >> IDA_SIZE_LOG;
-	ib = kmalloc(sizeof(struct idal_buffer) + nr_ptrs*sizeof(void *),
-		     GFP_DMA | GFP_KERNEL);
-	if (ib == NULL)
-		return ERR_PTR(-ENOMEM);
-	ib->size = size;
-	ib->page_order = page_order;
-	for (i = 0; i < nr_ptrs; i++) {
-		if ((i & (nr_chunks - 1)) != 0) {
-			ib->data[i] = ib->data[i-1] + IDA_BLOCK_SIZE;
-			continue;
-		}
-		ib->data[i] = (void *)
-			__get_free_pages(GFP_KERNEL, page_order);
-		if (ib->data[i] != NULL)
-			continue;
-		// Not enough memory
-		while (i >= nr_chunks) {
-			i -= nr_chunks;
-			free_pages((unsigned long) ib->data[i],
-				   ib->page_order);
-		}
-		kfree(ib);
-		return ERR_PTR(-ENOMEM);
-	}
-	return ib;
-}
-
-/*
- * Free an idal buffer.
- */
-static inline void
-idal_buffer_free(struct idal_buffer *ib)
-{
-	int nr_chunks, nr_ptrs, i;
-
-	nr_ptrs = (ib->size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
-	nr_chunks = (4096 << ib->page_order) >> IDA_SIZE_LOG;
-	for (i = 0; i < nr_ptrs; i += nr_chunks)
-		free_pages((unsigned long) ib->data[i], ib->page_order);
-	kfree(ib);
-}
-
-/*
- * Test if a idal list is really needed.
- */
-static inline int
-__idal_buffer_is_needed(struct idal_buffer *ib)
-{
-#ifdef __s390x__
-	return ib->size > (4096ul << ib->page_order) ||
-		idal_is_needed(ib->data[0], ib->size);
-#else
-	return ib->size > (4096ul << ib->page_order);
-#endif
-}
-
-/*
- * Set channel data address to idal buffer.
- */
-static inline void
-idal_buffer_set_cda(struct idal_buffer *ib, struct ccw1 *ccw)
-{
-	if (__idal_buffer_is_needed(ib)) {
-		// setup idals;
-		ccw->cda = (u32)(addr_t) ib->data;
-		ccw->flags |= CCW_FLAG_IDA;
-	} else
-		// we do not need idals - use direct addressing
-		ccw->cda = (u32)(addr_t) ib->data[0];
-	ccw->count = ib->size;
-}
-
-/*
- * Copy count bytes from an idal buffer to user memory
- */
-static inline size_t
-idal_buffer_to_user(struct idal_buffer *ib, void __user *to, size_t count)
-{
-	size_t left;
-	int i;
-
-	BUG_ON(count > ib->size);
-	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
-		left = copy_to_user(to, ib->data[i], IDA_BLOCK_SIZE);
-		if (left)
-			return left + count - IDA_BLOCK_SIZE;
-		to = (void __user *) to + IDA_BLOCK_SIZE;
-		count -= IDA_BLOCK_SIZE;
-	}
-	return copy_to_user(to, ib->data[i], count);
-}
-
-/*
- * Copy count bytes from user memory to an idal buffer
- */
-static inline size_t
-idal_buffer_from_user(struct idal_buffer *ib, const void __user *from, size_t count)
-{
-	size_t left;
-	int i;
-
-	BUG_ON(count > ib->size);
-	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
-		left = copy_from_user(ib->data[i], from, IDA_BLOCK_SIZE);
-		if (left)
-			return left + count - IDA_BLOCK_SIZE;
-		from = (void __user *) from + IDA_BLOCK_SIZE;
-		count -= IDA_BLOCK_SIZE;
-	}
-	return copy_from_user(ib->data[i], from, count);
-}
-
-#endif
diff --git a/include/asm-s390/io.h b/include/asm-s390/io.h
deleted file mode 100644
index b7ff6afc3caa..000000000000
--- a/include/asm-s390/io.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  include/asm-s390/io.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/io.h"
- */
-
-#ifndef _S390_IO_H
-#define _S390_IO_H
-
-#ifdef __KERNEL__
-
-#include <asm/page.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void * address)
-{
-	unsigned long real_address;
-	asm volatile(
-		 "	lra	%0,0(%1)\n"
-		 "	jz	0f\n"
-		 "	la	%0,0\n"
-                 "0:"
-		 : "=a" (real_address) : "a" (address) : "cc");
-        return real_address;
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
-	return (void *) address;
-}
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-s390/ioctl.h b/include/asm-s390/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-s390/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-s390/ioctls.h b/include/asm-s390/ioctls.h
deleted file mode 100644
index 40e481b1b461..000000000000
--- a/include/asm-s390/ioctls.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  include/asm-s390/ioctls.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/ioctls.h"
- */
-
-#ifndef __ARCH_S390_IOCTLS_H__
-#define __ARCH_S390_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-#endif
diff --git a/include/asm-s390/ipcbuf.h b/include/asm-s390/ipcbuf.h
deleted file mode 100644
index 37f293d12c8f..000000000000
--- a/include/asm-s390/ipcbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __S390_IPCBUF_H__
-#define __S390_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for S/390 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-#ifndef __s390x__
-	unsigned short		__pad2;
-#endif /* ! __s390x__ */
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __S390_IPCBUF_H__ */
diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h
deleted file mode 100644
index eaca6dff5405..000000000000
--- a/include/asm-s390/ipl.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * s390 (re)ipl support
- *
- * Copyright IBM Corp. 2007
- */
-
-#ifndef _ASM_S390_IPL_H
-#define _ASM_S390_IPL_H
-
-#include <asm/types.h>
-#include <asm/cio.h>
-#include <asm/setup.h>
-
-#define IPL_PARMBLOCK_ORIGIN	0x2000
-
-#define IPL_PARM_BLK_FCP_LEN (sizeof(struct ipl_list_hdr) + \
-			      sizeof(struct ipl_block_fcp))
-
-#define IPL_PARM_BLK0_FCP_LEN (sizeof(struct ipl_block_fcp) + 8)
-
-#define IPL_PARM_BLK_CCW_LEN (sizeof(struct ipl_list_hdr) + \
-			      sizeof(struct ipl_block_ccw))
-
-#define IPL_PARM_BLK0_CCW_LEN (sizeof(struct ipl_block_ccw) + 8)
-
-#define IPL_MAX_SUPPORTED_VERSION (0)
-
-#define IPL_PARMBLOCK_START	((struct ipl_parameter_block *) \
-				 IPL_PARMBLOCK_ORIGIN)
-#define IPL_PARMBLOCK_SIZE	(IPL_PARMBLOCK_START->hdr.len)
-
-struct ipl_list_hdr {
-	u32 len;
-	u8  reserved1[3];
-	u8  version;
-	u32 blk0_len;
-	u8  pbt;
-	u8  flags;
-	u16 reserved2;
-} __attribute__((packed));
-
-struct ipl_block_fcp {
-	u8  reserved1[313-1];
-	u8  opt;
-	u8  reserved2[3];
-	u16 reserved3;
-	u16 devno;
-	u8  reserved4[4];
-	u64 wwpn;
-	u64 lun;
-	u32 bootprog;
-	u8  reserved5[12];
-	u64 br_lba;
-	u32 scp_data_len;
-	u8  reserved6[260];
-	u8  scp_data[];
-} __attribute__((packed));
-
-#define DIAG308_VMPARM_SIZE	64
-
-struct ipl_block_ccw {
-	u8  load_parm[8];
-	u8  reserved1[84];
-	u8  reserved2[2];
-	u16 devno;
-	u8  vm_flags;
-	u8  reserved3[3];
-	u32 vm_parm_len;
-	u8  nss_name[8];
-	u8  vm_parm[DIAG308_VMPARM_SIZE];
-	u8  reserved4[8];
-} __attribute__((packed));
-
-struct ipl_parameter_block {
-	struct ipl_list_hdr hdr;
-	union {
-		struct ipl_block_fcp fcp;
-		struct ipl_block_ccw ccw;
-	} ipl_info;
-} __attribute__((packed,aligned(4096)));
-
-/*
- * IPL validity flags
- */
-extern u32 ipl_flags;
-extern u32 dump_prefix_page;
-extern unsigned int zfcpdump_prefix_array[];
-
-extern void do_reipl(void);
-extern void do_halt(void);
-extern void do_poff(void);
-extern void ipl_save_parameters(void);
-extern void ipl_update_parameters(void);
-extern void get_ipl_vmparm(char *);
-
-enum {
-	IPL_DEVNO_VALID		= 1,
-	IPL_PARMBLOCK_VALID	= 2,
-	IPL_NSS_VALID		= 4,
-};
-
-enum ipl_type {
-	IPL_TYPE_UNKNOWN	= 1,
-	IPL_TYPE_CCW		= 2,
-	IPL_TYPE_FCP		= 4,
-	IPL_TYPE_FCP_DUMP	= 8,
-	IPL_TYPE_NSS		= 16,
-};
-
-struct ipl_info
-{
-	enum ipl_type type;
-	union {
-		struct {
-			struct ccw_dev_id dev_id;
-		} ccw;
-		struct {
-			struct ccw_dev_id dev_id;
-			u64 wwpn;
-			u64 lun;
-		} fcp;
-		struct {
-			char name[NSS_NAME_SIZE + 1];
-		} nss;
-	} data;
-};
-
-extern struct ipl_info ipl_info;
-extern void setup_ipl(void);
-
-/*
- * DIAG 308 support
- */
-enum diag308_subcode  {
-	DIAG308_REL_HSA	= 2,
-	DIAG308_IPL	= 3,
-	DIAG308_DUMP	= 4,
-	DIAG308_SET	= 5,
-	DIAG308_STORE	= 6,
-};
-
-enum diag308_ipl_type {
-	DIAG308_IPL_TYPE_FCP	= 0,
-	DIAG308_IPL_TYPE_CCW	= 2,
-};
-
-enum diag308_opt {
-	DIAG308_IPL_OPT_IPL	= 0x10,
-	DIAG308_IPL_OPT_DUMP	= 0x20,
-};
-
-enum diag308_flags {
-	DIAG308_FLAGS_LP_VALID	= 0x80,
-};
-
-enum diag308_vm_flags {
-	DIAG308_VM_FLAGS_NSS_VALID	= 0x80,
-	DIAG308_VM_FLAGS_VP_VALID	= 0x40,
-};
-
-enum diag308_rc {
-	DIAG308_RC_OK	= 1,
-};
-
-extern int diag308(unsigned long subcode, void *addr);
-
-#endif /* _ASM_S390_IPL_H */
diff --git a/include/asm-s390/irq.h b/include/asm-s390/irq.h
deleted file mode 100644
index 7da991a858f8..000000000000
--- a/include/asm-s390/irq.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
-
-#ifdef __KERNEL__
-#include <linux/hardirq.h>
-
-/*
- * the definition of irqs has changed in 2.5.46:
- * NR_IRQS is no longer the number of i/o
- * interrupts (65536), but rather the number
- * of interrupt classes (2).
- * Only external and i/o interrupts make much sense here (CH).
- */
-
-enum interruption_class {
-	EXTERNAL_INTERRUPT,
-	IO_INTERRUPT,
-
-	NR_IRQS,
-};
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-s390/irq_regs.h b/include/asm-s390/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-s390/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-s390/irqflags.h b/include/asm-s390/irqflags.h
deleted file mode 100644
index 3f26131120b7..000000000000
--- a/include/asm-s390/irqflags.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *  include/asm-s390/irqflags.h
- *
- *    Copyright (C) IBM Corp. 2006
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- */
-
-#ifndef __ASM_IRQFLAGS_H
-#define __ASM_IRQFLAGS_H
-
-#ifdef __KERNEL__
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-/* store then or system mask. */
-#define __raw_local_irq_stosm(__or)					\
-({									\
-	unsigned long __mask;						\
-	asm volatile(							\
-		"	stosm	%0,%1"					\
-		: "=Q" (__mask) : "i" (__or) : "memory");		\
-	__mask;								\
-})
-
-/* store then and system mask. */
-#define __raw_local_irq_stnsm(__and)					\
-({									\
-	unsigned long __mask;						\
-	asm volatile(							\
-		"	stnsm	%0,%1"					\
-		: "=Q" (__mask) : "i" (__and) : "memory");		\
-	__mask;								\
-})
-
-/* set system mask. */
-#define __raw_local_irq_ssm(__mask)					\
-({									\
-	asm volatile("ssm   %0" : : "Q" (__mask) : "memory");		\
-})
-
-#else /* __GNUC__ */
-
-/* store then or system mask. */
-#define __raw_local_irq_stosm(__or)					\
-({									\
-	unsigned long __mask;						\
-	asm volatile(							\
-		"	stosm	0(%1),%2"				\
-		: "=m" (__mask)						\
-		: "a" (&__mask), "i" (__or) : "memory");		\
-	__mask;								\
-})
-
-/* store then and system mask. */
-#define __raw_local_irq_stnsm(__and)					\
-({									\
-	unsigned long __mask;						\
-	asm volatile(							\
-		"	stnsm	0(%1),%2"				\
-		: "=m" (__mask)						\
-		: "a" (&__mask), "i" (__and) : "memory");		\
-	__mask;								\
-})
-
-/* set system mask. */
-#define __raw_local_irq_ssm(__mask)					\
-({									\
-	asm volatile(							\
-		"	ssm	0(%0)"					\
-		: : "a" (&__mask), "m" (__mask) : "memory");		\
-})
-
-#endif /* __GNUC__ */
-
-/* interrupt control.. */
-static inline unsigned long raw_local_irq_enable(void)
-{
-	return __raw_local_irq_stosm(0x03);
-}
-
-static inline unsigned long raw_local_irq_disable(void)
-{
-	return __raw_local_irq_stnsm(0xfc);
-}
-
-#define raw_local_save_flags(x)						\
-do {									\
-	typecheck(unsigned long, x);					\
-	(x) = __raw_local_irq_stosm(0x00);				\
-} while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	__raw_local_irq_ssm(flags);
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return !(flags & (3UL << (BITS_PER_LONG - 8)));
-}
-
-/* For spinlocks etc */
-#define raw_local_irq_save(x)	((x) = raw_local_irq_disable())
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_IRQFLAGS_H */
diff --git a/include/asm-s390/isc.h b/include/asm-s390/isc.h
deleted file mode 100644
index 34bb8916db4f..000000000000
--- a/include/asm-s390/isc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_S390_ISC_H
-#define _ASM_S390_ISC_H
-
-#include <linux/types.h>
-
-/*
- * I/O interruption subclasses used by drivers.
- * Please add all used iscs here so that it is possible to distribute
- * isc usage between drivers.
- * Reminder: 0 is highest priority, 7 lowest.
- */
-#define MAX_ISC 7
-
-/* Regular I/O interrupts. */
-#define IO_SCH_ISC 3			/* regular I/O subchannels */
-#define CONSOLE_ISC 1			/* console I/O subchannel */
-#define CHSC_SCH_ISC 7			/* CHSC subchannels */
-/* Adapter interrupts. */
-#define QDIO_AIRQ_ISC IO_SCH_ISC	/* I/O subchannel in qdio mode */
-
-/* Functions for registration of I/O interruption subclasses */
-void isc_register(unsigned int isc);
-void isc_unregister(unsigned int isc);
-
-#endif /* _ASM_S390_ISC_H */
diff --git a/include/asm-s390/itcw.h b/include/asm-s390/itcw.h
deleted file mode 100644
index a9bc5c36b32a..000000000000
--- a/include/asm-s390/itcw.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  Functions for incremental construction of fcx enabled I/O control blocks.
- *
- *    Copyright IBM Corp. 2008
- *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
- */
-
-#ifndef _ASM_S390_ITCW_H
-#define _ASM_S390_ITCW_H _ASM_S390_ITCW_H
-
-#include <linux/types.h>
-#include <asm/fcx.h>
-
-#define ITCW_OP_READ	0
-#define ITCW_OP_WRITE	1
-
-struct itcw;
-
-struct tcw *itcw_get_tcw(struct itcw *itcw);
-size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws);
-struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
-		       int max_tidaws, int intrg_max_tidaws);
-struct dcw *itcw_add_dcw(struct itcw *itcw, u8 cmd, u8 flags, void *cd,
-			 u8 cd_count, u32 count);
-struct tidaw *itcw_add_tidaw(struct itcw *itcw, u8 flags, void *addr,
-			     u32 count);
-void itcw_set_data(struct itcw *itcw, void *addr, int use_tidal);
-void itcw_finalize(struct itcw *itcw);
-
-#endif /* _ASM_S390_ITCW_H */
diff --git a/include/asm-s390/kdebug.h b/include/asm-s390/kdebug.h
deleted file mode 100644
index 40db27cd6e60..000000000000
--- a/include/asm-s390/kdebug.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _S390_KDEBUG_H
-#define _S390_KDEBUG_H
-
-/*
- * Feb 2006 Ported to s390 <grundym@us.ibm.com>
- */
-
-struct pt_regs;
-
-enum die_val {
-	DIE_OOPS = 1,
-	DIE_BPT,
-	DIE_SSTEP,
-	DIE_PANIC,
-	DIE_NMI,
-	DIE_DIE,
-	DIE_NMIWATCHDOG,
-	DIE_KERNELDEBUG,
-	DIE_TRAP,
-	DIE_GPF,
-	DIE_CALL,
-	DIE_NMI_IPI,
-};
-
-extern void die(const char *, struct pt_regs *, long);
-
-#endif
diff --git a/include/asm-s390/kexec.h b/include/asm-s390/kexec.h
deleted file mode 100644
index f219c6411e0b..000000000000
--- a/include/asm-s390/kexec.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-s390/kexec.h
- *
- * (C) Copyright IBM Corp. 2005
- *
- * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
- *
- */
-
-#ifndef _S390_KEXEC_H
-#define _S390_KEXEC_H
-
-#ifdef __KERNEL__
-#include <asm/page.h>
-#endif
-#include <asm/processor.h>
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- */
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-
-/* Maximum address we can use for the control pages */
-/* Not more than 2GB */
-#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
-
-/* Allocate one page for the pdp and the second for the code */
-#define KEXEC_CONTROL_CODE_SIZE 4096
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_S390
-
-/* Provide a dummy definition to avoid build failures. */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-					struct pt_regs *oldregs) { }
-
-#endif /*_S390_KEXEC_H */
diff --git a/include/asm-s390/kmap_types.h b/include/asm-s390/kmap_types.h
deleted file mode 100644
index fd1574648223..000000000000
--- a/include/asm-s390/kmap_types.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,	
-	KM_TYPE_NR
-};
-
-#endif
-#endif /* __KERNEL__ */
diff --git a/include/asm-s390/kprobes.h b/include/asm-s390/kprobes.h
deleted file mode 100644
index 330f68caffe4..000000000000
--- a/include/asm-s390/kprobes.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef _ASM_S390_KPROBES_H
-#define _ASM_S390_KPROBES_H
-/*
- *  Kernel Probes (KProbes)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2006
- *
- * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
- *		Probes initial implementation ( includes suggestions from
- *		Rusty Russell).
- * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
- *		<ananth@in.ibm.com>
- * 2005-Dec	Used as a template for s390 by Mike Grundy
- *		<grundym@us.ibm.com>
- */
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-
-#define  __ARCH_WANT_KPROBES_INSN_SLOT
-struct pt_regs;
-struct kprobe;
-
-typedef u16 kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION	0x0002
-
-/* Maximum instruction size is 3 (16bit) halfwords: */
-#define MAX_INSN_SIZE		0x0003
-#define MAX_STACK_SIZE		64
-#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
-	(((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
-	? (MAX_STACK_SIZE) \
-	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-
-#define kretprobe_blacklist_size 0
-
-#define KPROBE_SWAP_INST	0x10
-
-#define FIXUP_PSW_NORMAL	0x08
-#define FIXUP_BRANCH_NOT_TAKEN	0x04
-#define FIXUP_RETURN_REGISTER	0x02
-#define FIXUP_NOT_REQUIRED	0x01
-
-/* Architecture specific copy of original instruction */
-struct arch_specific_insn {
-	/* copy of original instruction */
-	kprobe_opcode_t *insn;
-	int fixup;
-	int ilen;
-	int reg;
-};
-
-struct ins_replace_args {
-	kprobe_opcode_t *ptr;
-	kprobe_opcode_t old;
-	kprobe_opcode_t new;
-};
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned long status;
-	unsigned long saved_psw;
-	unsigned long kprobe_saved_imask;
-	unsigned long kprobe_saved_ctl[3];
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-	unsigned long kprobe_status;
-	unsigned long kprobe_saved_imask;
-	unsigned long kprobe_saved_ctl[3];
-	struct pt_regs jprobe_saved_regs;
-	unsigned long jprobe_saved_r14;
-	unsigned long jprobe_saved_r15;
-	struct prev_kprobe prev_kprobe;
-	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
-};
-
-void arch_remove_kprobe(struct kprobe *p);
-void kretprobe_trampoline(void);
-int  is_prohibited_opcode(kprobe_opcode_t *instruction);
-void get_instruction_type(struct arch_specific_insn *ainsn);
-
-int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-int kprobe_exceptions_notify(struct notifier_block *self,
-	unsigned long val, void *data);
-
-#define flush_insn_slot(p)	do { } while (0)
-
-#endif	/* _ASM_S390_KPROBES_H */
diff --git a/include/asm-s390/kvm.h b/include/asm-s390/kvm.h
deleted file mode 100644
index d74002f95794..000000000000
--- a/include/asm-s390/kvm.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __LINUX_KVM_S390_H
-#define __LINUX_KVM_S390_H
-
-/*
- * asm-s390/kvm.h - KVM s390 specific structures and definitions
- *
- * Copyright IBM Corp. 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- *    Author(s): Carsten Otte <cotte@de.ibm.com>
- *               Christian Borntraeger <borntraeger@de.ibm.com>
- */
-#include <asm/types.h>
-
-/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
-struct kvm_pic_state {
-	/* no PIC for s390 */
-};
-
-struct kvm_ioapic_state {
-	/* no IOAPIC for s390 */
-};
-
-/* for KVM_GET_REGS and KVM_SET_REGS */
-struct kvm_regs {
-	/* general purpose regs for s390 */
-	__u64 gprs[16];
-};
-
-/* for KVM_GET_SREGS and KVM_SET_SREGS */
-struct kvm_sregs {
-	__u32 acrs[16];
-	__u64 crs[16];
-};
-
-/* for KVM_GET_FPU and KVM_SET_FPU */
-struct kvm_fpu {
-	__u32 fpc;
-	__u64 fprs[16];
-};
-
-#endif
diff --git a/include/asm-s390/kvm_host.h b/include/asm-s390/kvm_host.h
deleted file mode 100644
index 18cbd8a39796..000000000000
--- a/include/asm-s390/kvm_host.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * asm-s390/kvm_host.h - definition for kernel virtual machines on s390
- *
- * Copyright IBM Corp. 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- *    Author(s): Carsten Otte <cotte@de.ibm.com>
- */
-
-
-#ifndef ASM_KVM_HOST_H
-#define ASM_KVM_HOST_H
-#include <linux/kvm_host.h>
-#include <asm/debug.h>
-
-#define KVM_MAX_VCPUS 64
-#define KVM_MEMORY_SLOTS 32
-/* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS 4
-
-struct kvm_guest_debug {
-};
-
-struct sca_entry {
-	atomic_t scn;
-	__u64	reserved;
-	__u64	sda;
-	__u64	reserved2[2];
-} __attribute__((packed));
-
-
-struct sca_block {
-	__u64	ipte_control;
-	__u64	reserved[5];
-	__u64	mcn;
-	__u64	reserved2;
-	struct sca_entry cpu[64];
-} __attribute__((packed));
-
-#define KVM_PAGES_PER_HPAGE 256
-
-#define CPUSTAT_HOST       0x80000000
-#define CPUSTAT_WAIT       0x10000000
-#define CPUSTAT_ECALL_PEND 0x08000000
-#define CPUSTAT_STOP_INT   0x04000000
-#define CPUSTAT_IO_INT     0x02000000
-#define CPUSTAT_EXT_INT    0x01000000
-#define CPUSTAT_RUNNING    0x00800000
-#define CPUSTAT_RETAINED   0x00400000
-#define CPUSTAT_TIMING_SUB 0x00020000
-#define CPUSTAT_SIE_SUB    0x00010000
-#define CPUSTAT_RRF        0x00008000
-#define CPUSTAT_SLSV       0x00004000
-#define CPUSTAT_SLSR       0x00002000
-#define CPUSTAT_ZARCH      0x00000800
-#define CPUSTAT_MCDS       0x00000100
-#define CPUSTAT_SM         0x00000080
-#define CPUSTAT_G          0x00000008
-#define CPUSTAT_J          0x00000002
-#define CPUSTAT_P          0x00000001
-
-struct sie_block {
-	atomic_t cpuflags;		/* 0x0000 */
-	__u32	prefix;			/* 0x0004 */
-	__u8	reserved8[32];		/* 0x0008 */
-	__u64	cputm;			/* 0x0028 */
-	__u64	ckc;			/* 0x0030 */
-	__u64	epoch;			/* 0x0038 */
-	__u8	reserved40[4];		/* 0x0040 */
-#define LCTL_CR0	0x8000
-	__u16   lctl;			/* 0x0044 */
-	__s16	icpua;			/* 0x0046 */
-	__u32	ictl;			/* 0x0048 */
-	__u32	eca;			/* 0x004c */
-	__u8	icptcode;		/* 0x0050 */
-	__u8	reserved51;		/* 0x0051 */
-	__u16	ihcpu;			/* 0x0052 */
-	__u8	reserved54[2];		/* 0x0054 */
-	__u16	ipa;			/* 0x0056 */
-	__u32	ipb;			/* 0x0058 */
-	__u32	scaoh;			/* 0x005c */
-	__u8	reserved60;		/* 0x0060 */
-	__u8	ecb;			/* 0x0061 */
-	__u8	reserved62[2];		/* 0x0062 */
-	__u32	scaol;			/* 0x0064 */
-	__u8	reserved68[4];		/* 0x0068 */
-	__u32	todpr;			/* 0x006c */
-	__u8	reserved70[16];		/* 0x0070 */
-	__u64	gmsor;			/* 0x0080 */
-	__u64	gmslm;			/* 0x0088 */
-	psw_t	gpsw;			/* 0x0090 */
-	__u64	gg14;			/* 0x00a0 */
-	__u64	gg15;			/* 0x00a8 */
-	__u8	reservedb0[30];		/* 0x00b0 */
-	__u16   iprcc;			/* 0x00ce */
-	__u8	reservedd0[48];		/* 0x00d0 */
-	__u64	gcr[16];		/* 0x0100 */
-	__u64	gbea;			/* 0x0180 */
-	__u8	reserved188[120];	/* 0x0188 */
-} __attribute__((packed));
-
-struct kvm_vcpu_stat {
-	u32 exit_userspace;
-	u32 exit_null;
-	u32 exit_external_request;
-	u32 exit_external_interrupt;
-	u32 exit_stop_request;
-	u32 exit_validity;
-	u32 exit_instruction;
-	u32 instruction_lctl;
-	u32 instruction_lctg;
-	u32 exit_program_interruption;
-	u32 exit_instr_and_program;
-	u32 deliver_emergency_signal;
-	u32 deliver_service_signal;
-	u32 deliver_virtio_interrupt;
-	u32 deliver_stop_signal;
-	u32 deliver_prefix_signal;
-	u32 deliver_restart_signal;
-	u32 deliver_program_int;
-	u32 exit_wait_state;
-	u32 instruction_stidp;
-	u32 instruction_spx;
-	u32 instruction_stpx;
-	u32 instruction_stap;
-	u32 instruction_storage_key;
-	u32 instruction_stsch;
-	u32 instruction_chsc;
-	u32 instruction_stsi;
-	u32 instruction_stfl;
-	u32 instruction_sigp_sense;
-	u32 instruction_sigp_emergency;
-	u32 instruction_sigp_stop;
-	u32 instruction_sigp_arch;
-	u32 instruction_sigp_prefix;
-	u32 instruction_sigp_restart;
-	u32 diagnose_44;
-};
-
-struct io_info {
-	__u16        subchannel_id;            /* 0x0b8 */
-	__u16        subchannel_nr;            /* 0x0ba */
-	__u32        io_int_parm;              /* 0x0bc */
-	__u32        io_int_word;              /* 0x0c0 */
-};
-
-struct ext_info {
-	__u32 ext_params;
-	__u64 ext_params2;
-};
-
-#define PGM_OPERATION            0x01
-#define PGM_PRIVILEGED_OPERATION 0x02
-#define PGM_EXECUTE              0x03
-#define PGM_PROTECTION           0x04
-#define PGM_ADDRESSING           0x05
-#define PGM_SPECIFICATION        0x06
-#define PGM_DATA                 0x07
-
-struct pgm_info {
-	__u16 code;
-};
-
-struct prefix_info {
-	__u32 address;
-};
-
-struct interrupt_info {
-	struct list_head list;
-	u64	type;
-	union {
-		struct io_info io;
-		struct ext_info ext;
-		struct pgm_info pgm;
-		struct prefix_info prefix;
-	};
-};
-
-/* for local_interrupt.action_flags */
-#define ACTION_STORE_ON_STOP 1
-#define ACTION_STOP_ON_STOP  2
-
-struct local_interrupt {
-	spinlock_t lock;
-	struct list_head list;
-	atomic_t active;
-	struct float_interrupt *float_int;
-	int timer_due; /* event indicator for waitqueue below */
-	wait_queue_head_t wq;
-	atomic_t *cpuflags;
-	unsigned int action_bits;
-};
-
-struct float_interrupt {
-	spinlock_t lock;
-	struct list_head list;
-	atomic_t active;
-	int next_rr_cpu;
-	unsigned long idle_mask [(64 + sizeof(long) - 1) / sizeof(long)];
-	struct local_interrupt *local_int[64];
-};
-
-
-struct kvm_vcpu_arch {
-	struct sie_block *sie_block;
-	unsigned long	  guest_gprs[16];
-	s390_fp_regs      host_fpregs;
-	unsigned int      host_acrs[NUM_ACRS];
-	s390_fp_regs      guest_fpregs;
-	unsigned int      guest_acrs[NUM_ACRS];
-	struct local_interrupt local_int;
-	struct timer_list ckc_timer;
-	union  {
-		cpuid_t	  cpu_id;
-		u64	  stidp_data;
-	};
-};
-
-struct kvm_vm_stat {
-	u32 remote_tlb_flush;
-};
-
-struct kvm_arch{
-	unsigned long guest_origin;
-	unsigned long guest_memsize;
-	struct sca_block *sca;
-	debug_info_t *dbf;
-	struct float_interrupt float_int;
-};
-
-extern int sie64a(struct sie_block *, __u64 *);
-#endif
diff --git a/include/asm-s390/kvm_para.h b/include/asm-s390/kvm_para.h
deleted file mode 100644
index 2c503796b619..000000000000
--- a/include/asm-s390/kvm_para.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * asm-s390/kvm_para.h - definition for paravirtual devices on s390
- *
- * Copyright IBM Corp. 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
- */
-
-#ifndef __S390_KVM_PARA_H
-#define __S390_KVM_PARA_H
-
-/*
- * Hypercalls for KVM on s390. The calling convention is similar to the
- * s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1
- * as hypercall number and R7 as parameter 6. The return value is
- * written to R2. We use the diagnose instruction as hypercall. To avoid
- * conflicts with existing diagnoses for LPAR and z/VM, we do not use
- * the instruction encoded number, but specify the number in R1 and
- * use 0x500 as KVM hypercall
- *
- * Copyright IBM Corp. 2007,2008
- * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2.
- */
-
-static inline long kvm_hypercall0(unsigned long nr)
-{
-	register unsigned long __nr asm("1") = nr;
-	register long __rc asm("2");
-
-	asm volatile ("diag 2,4,0x500\n"
-		      : "=d" (__rc) : "d" (__nr): "memory", "cc");
-	return __rc;
-}
-
-static inline long kvm_hypercall1(unsigned long nr, unsigned long p1)
-{
-	register unsigned long __nr asm("1") = nr;
-	register unsigned long __p1 asm("2") = p1;
-	register long __rc asm("2");
-
-	asm volatile ("diag 2,4,0x500\n"
-		      : "=d" (__rc) : "d" (__nr), "0" (__p1) : "memory", "cc");
-	return __rc;
-}
-
-static inline long kvm_hypercall2(unsigned long nr, unsigned long p1,
-			       unsigned long p2)
-{
-	register unsigned long __nr asm("1") = nr;
-	register unsigned long __p1 asm("2") = p1;
-	register unsigned long __p2 asm("3") = p2;
-	register long __rc asm("2");
-
-	asm volatile ("diag 2,4,0x500\n"
-		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2)
-		      : "memory", "cc");
-	return __rc;
-}
-
-static inline long kvm_hypercall3(unsigned long nr, unsigned long p1,
-			       unsigned long p2, unsigned long p3)
-{
-	register unsigned long __nr asm("1") = nr;
-	register unsigned long __p1 asm("2") = p1;
-	register unsigned long __p2 asm("3") = p2;
-	register unsigned long __p3 asm("4") = p3;
-	register long __rc asm("2");
-
-	asm volatile ("diag 2,4,0x500\n"
-		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
-			"d" (__p3) : "memory", "cc");
-	return __rc;
-}
-
-
-static inline long kvm_hypercall4(unsigned long nr, unsigned long p1,
-			       unsigned long p2, unsigned long p3,
-			       unsigned long p4)
-{
-	register unsigned long __nr asm("1") = nr;
-	register unsigned long __p1 asm("2") = p1;
-	register unsigned long __p2 asm("3") = p2;
-	register unsigned long __p3 asm("4") = p3;
-	register unsigned long __p4 asm("5") = p4;
-	register long __rc asm("2");
-
-	asm volatile ("diag 2,4,0x500\n"
-		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
-			"d" (__p3), "d" (__p4) : "memory", "cc");
-	return __rc;
-}
-
-static inline long kvm_hypercall5(unsigned long nr, unsigned long p1,
-			       unsigned long p2, unsigned long p3,
-			       unsigned long p4, unsigned long p5)
-{
-	register unsigned long __nr asm("1") = nr;
-	register unsigned long __p1 asm("2") = p1;
-	register unsigned long __p2 asm("3") = p2;
-	register unsigned long __p3 asm("4") = p3;
-	register unsigned long __p4 asm("5") = p4;
-	register unsigned long __p5 asm("6") = p5;
-	register long __rc asm("2");
-
-	asm volatile ("diag 2,4,0x500\n"
-		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
-			"d" (__p3), "d" (__p4), "d" (__p5)  : "memory", "cc");
-	return __rc;
-}
-
-static inline long kvm_hypercall6(unsigned long nr, unsigned long p1,
-			       unsigned long p2, unsigned long p3,
-			       unsigned long p4, unsigned long p5,
-			       unsigned long p6)
-{
-	register unsigned long __nr asm("1") = nr;
-	register unsigned long __p1 asm("2") = p1;
-	register unsigned long __p2 asm("3") = p2;
-	register unsigned long __p3 asm("4") = p3;
-	register unsigned long __p4 asm("5") = p4;
-	register unsigned long __p5 asm("6") = p5;
-	register unsigned long __p6 asm("7") = p6;
-	register long __rc asm("2");
-
-	asm volatile ("diag 2,4,0x500\n"
-		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
-			"d" (__p3), "d" (__p4), "d" (__p5), "d" (__p6)
-		      : "memory", "cc");
-	return __rc;
-}
-
-/* kvm on s390 is always paravirtualization enabled */
-static inline int kvm_para_available(void)
-{
-	return 1;
-}
-
-/* No feature bits are currently assigned for kvm on s390 */
-static inline unsigned int kvm_arch_para_features(void)
-{
-	return 0;
-}
-
-#endif /* __S390_KVM_PARA_H */
diff --git a/include/asm-s390/kvm_virtio.h b/include/asm-s390/kvm_virtio.h
deleted file mode 100644
index 5c871a990c29..000000000000
--- a/include/asm-s390/kvm_virtio.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * kvm_virtio.h - definition for virtio for kvm on s390
- *
- * Copyright IBM Corp. 2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
- */
-
-#ifndef __KVM_S390_VIRTIO_H
-#define __KVM_S390_VIRTIO_H
-
-#include <linux/types.h>
-
-struct kvm_device_desc {
-	/* The device type: console, network, disk etc.  Type 0 terminates. */
-	__u8 type;
-	/* The number of virtqueues (first in config array) */
-	__u8 num_vq;
-	/*
-	 * The number of bytes of feature bits.  Multiply by 2: one for host
-	 * features and one for guest acknowledgements.
-	 */
-	__u8 feature_len;
-	/* The number of bytes of the config array after virtqueues. */
-	__u8 config_len;
-	/* A status byte, written by the Guest. */
-	__u8 status;
-	__u8 config[0];
-};
-
-/*
- * This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space.
- */
-struct kvm_vqconfig {
-	/* The token returned with an interrupt. Set by the guest */
-	__u64 token;
-	/* The address of the virtio ring */
-	__u64 address;
-	/* The number of entries in the virtio_ring */
-	__u16 num;
-
-};
-
-#define KVM_S390_VIRTIO_NOTIFY		0
-#define KVM_S390_VIRTIO_RESET		1
-#define KVM_S390_VIRTIO_SET_STATUS	2
-
-#endif
diff --git a/include/asm-s390/linkage.h b/include/asm-s390/linkage.h
deleted file mode 100644
index 291c2d01c44f..000000000000
--- a/include/asm-s390/linkage.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-/* Nothing to see here... */
-
-#endif
diff --git a/include/asm-s390/local.h b/include/asm-s390/local.h
deleted file mode 100644
index c11c530f74d0..000000000000
--- a/include/asm-s390/local.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local.h>
diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h
deleted file mode 100644
index 0bc51d52a899..000000000000
--- a/include/asm-s390/lowcore.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- *  include/asm-s390/lowcore.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- */
-
-#ifndef _ASM_S390_LOWCORE_H
-#define _ASM_S390_LOWCORE_H
-
-#ifndef __s390x__
-#define __LC_EXT_OLD_PSW                0x018
-#define __LC_SVC_OLD_PSW                0x020
-#define __LC_PGM_OLD_PSW                0x028
-#define __LC_MCK_OLD_PSW                0x030
-#define __LC_IO_OLD_PSW                 0x038
-#define __LC_EXT_NEW_PSW                0x058
-#define __LC_SVC_NEW_PSW                0x060
-#define __LC_PGM_NEW_PSW                0x068
-#define __LC_MCK_NEW_PSW                0x070
-#define __LC_IO_NEW_PSW                 0x078
-#else /* !__s390x__ */
-#define __LC_EXT_OLD_PSW                0x0130
-#define __LC_SVC_OLD_PSW                0x0140
-#define __LC_PGM_OLD_PSW                0x0150
-#define __LC_MCK_OLD_PSW                0x0160
-#define __LC_IO_OLD_PSW                 0x0170
-#define __LC_EXT_NEW_PSW                0x01b0
-#define __LC_SVC_NEW_PSW                0x01c0
-#define __LC_PGM_NEW_PSW                0x01d0
-#define __LC_MCK_NEW_PSW                0x01e0
-#define __LC_IO_NEW_PSW                 0x01f0
-#endif /* !__s390x__ */
-
-#define __LC_IPL_PARMBLOCK_PTR		0x014
-#define __LC_EXT_PARAMS                 0x080
-#define __LC_CPU_ADDRESS                0x084
-#define __LC_EXT_INT_CODE               0x086
-
-#define __LC_SVC_ILC                    0x088
-#define __LC_SVC_INT_CODE               0x08A
-#define __LC_PGM_ILC                    0x08C
-#define __LC_PGM_INT_CODE               0x08E
-
-#define __LC_PER_ATMID			0x096
-#define __LC_PER_ADDRESS		0x098
-#define __LC_PER_ACCESS_ID		0x0A1
-#define __LC_AR_MODE_ID			0x0A3
-
-#define __LC_SUBCHANNEL_ID              0x0B8
-#define __LC_SUBCHANNEL_NR              0x0BA
-#define __LC_IO_INT_PARM                0x0BC
-#define __LC_IO_INT_WORD                0x0C0
-#define __LC_MCCK_CODE                  0x0E8
-
-#define __LC_LAST_BREAK 		0x110
-
-#define __LC_RETURN_PSW                 0x200
-
-#define __LC_SAVE_AREA                  0xC00
-
-#ifndef __s390x__
-#define __LC_IRB			0x208
-#define __LC_SYNC_ENTER_TIMER		0x248
-#define __LC_ASYNC_ENTER_TIMER		0x250
-#define __LC_EXIT_TIMER			0x258
-#define __LC_LAST_UPDATE_TIMER		0x260
-#define __LC_USER_TIMER			0x268
-#define __LC_SYSTEM_TIMER		0x270
-#define __LC_LAST_UPDATE_CLOCK		0x278
-#define __LC_STEAL_CLOCK		0x280
-#define __LC_RETURN_MCCK_PSW            0x288
-#define __LC_KERNEL_STACK               0xC40
-#define __LC_THREAD_INFO		0xC44
-#define __LC_ASYNC_STACK                0xC48
-#define __LC_KERNEL_ASCE		0xC4C
-#define __LC_USER_ASCE			0xC50
-#define __LC_PANIC_STACK                0xC54
-#define __LC_CPUID                      0xC60
-#define __LC_CPUADDR                    0xC68
-#define __LC_IPLDEV                     0xC7C
-#define __LC_CURRENT			0xC90
-#define __LC_INT_CLOCK			0xC98
-#else /* __s390x__ */
-#define __LC_IRB			0x210
-#define __LC_SYNC_ENTER_TIMER		0x250
-#define __LC_ASYNC_ENTER_TIMER		0x258
-#define __LC_EXIT_TIMER			0x260
-#define __LC_LAST_UPDATE_TIMER		0x268
-#define __LC_USER_TIMER			0x270
-#define __LC_SYSTEM_TIMER		0x278
-#define __LC_LAST_UPDATE_CLOCK		0x280
-#define __LC_STEAL_CLOCK		0x288
-#define __LC_RETURN_MCCK_PSW            0x290
-#define __LC_KERNEL_STACK               0xD40
-#define __LC_THREAD_INFO		0xD48
-#define __LC_ASYNC_STACK                0xD50
-#define __LC_KERNEL_ASCE		0xD58
-#define __LC_USER_ASCE			0xD60
-#define __LC_PANIC_STACK                0xD68
-#define __LC_CPUID			0xD80
-#define __LC_CPUADDR			0xD88
-#define __LC_IPLDEV                     0xDB8
-#define __LC_CURRENT			0xDD8
-#define __LC_INT_CLOCK			0xDE8
-#endif /* __s390x__ */
-
-
-#define __LC_PANIC_MAGIC		0xE00
-#ifndef __s390x__
-#define __LC_PFAULT_INTPARM             0x080
-#define __LC_CPU_TIMER_SAVE_AREA        0x0D8
-#define __LC_CLOCK_COMP_SAVE_AREA	0x0E0
-#define __LC_PSW_SAVE_AREA		0x100
-#define __LC_PREFIX_SAVE_AREA		0x108
-#define __LC_AREGS_SAVE_AREA            0x120
-#define __LC_FPREGS_SAVE_AREA		0x160
-#define __LC_GPREGS_SAVE_AREA           0x180
-#define __LC_CREGS_SAVE_AREA            0x1C0
-#else /* __s390x__ */
-#define __LC_PFAULT_INTPARM             0x11B8
-#define __LC_FPREGS_SAVE_AREA		0x1200
-#define __LC_GPREGS_SAVE_AREA           0x1280
-#define __LC_PSW_SAVE_AREA		0x1300
-#define __LC_PREFIX_SAVE_AREA		0x1318
-#define __LC_FP_CREG_SAVE_AREA		0x131C
-#define __LC_TODREG_SAVE_AREA		0x1324
-#define __LC_CPU_TIMER_SAVE_AREA        0x1328
-#define __LC_CLOCK_COMP_SAVE_AREA	0x1331
-#define __LC_AREGS_SAVE_AREA            0x1340
-#define __LC_CREGS_SAVE_AREA            0x1380
-#endif /* __s390x__ */
-
-#ifndef __ASSEMBLY__
-
-#include <asm/processor.h>
-#include <linux/types.h>
-#include <asm/sigp.h>
-
-void restart_int_handler(void);
-void ext_int_handler(void);
-void system_call(void);
-void pgm_check_handler(void);
-void mcck_int_handler(void);
-void io_int_handler(void);
-
-struct save_area_s390 {
-	u32	ext_save;
-	u64	timer;
-	u64	clk_cmp;
-	u8	pad1[24];
-	u8	psw[8];
-	u32	pref_reg;
-	u8	pad2[20];
-	u32	acc_regs[16];
-	u64	fp_regs[4];
-	u32	gp_regs[16];
-	u32	ctrl_regs[16];
-}  __attribute__((packed));
-
-struct save_area_s390x {
-	u64	fp_regs[16];
-	u64	gp_regs[16];
-	u8	psw[16];
-	u8	pad1[8];
-	u32	pref_reg;
-	u32	fp_ctrl_reg;
-	u8	pad2[4];
-	u32	tod_reg;
-	u64	timer;
-	u64	clk_cmp;
-	u8	pad3[8];
-	u32	acc_regs[16];
-	u64	ctrl_regs[16];
-}  __attribute__((packed));
-
-union save_area {
-	struct save_area_s390	s390;
-	struct save_area_s390x	s390x;
-};
-
-#define SAVE_AREA_BASE_S390	0xd4
-#define SAVE_AREA_BASE_S390X	0x1200
-
-#ifndef __s390x__
-#define SAVE_AREA_SIZE sizeof(struct save_area_s390)
-#define SAVE_AREA_BASE SAVE_AREA_BASE_S390
-#else
-#define SAVE_AREA_SIZE sizeof(struct save_area_s390x)
-#define SAVE_AREA_BASE SAVE_AREA_BASE_S390X
-#endif
-
-struct _lowcore
-{
-#ifndef __s390x__
-        /* prefix area: defined by architecture */
-	psw_t        restart_psw;              /* 0x000 */
-	__u32        ccw2[4];                  /* 0x008 */
-	psw_t        external_old_psw;         /* 0x018 */
-	psw_t        svc_old_psw;              /* 0x020 */
-	psw_t        program_old_psw;          /* 0x028 */
-	psw_t        mcck_old_psw;             /* 0x030 */
-	psw_t        io_old_psw;               /* 0x038 */
-	__u8         pad1[0x58-0x40];          /* 0x040 */
-	psw_t        external_new_psw;         /* 0x058 */
-	psw_t        svc_new_psw;              /* 0x060 */
-	psw_t        program_new_psw;          /* 0x068 */
-	psw_t        mcck_new_psw;             /* 0x070 */
-	psw_t        io_new_psw;               /* 0x078 */
-	__u32        ext_params;               /* 0x080 */
-	__u16        cpu_addr;                 /* 0x084 */
-	__u16        ext_int_code;             /* 0x086 */
-        __u16        svc_ilc;                  /* 0x088 */
-        __u16        svc_code;                 /* 0x08a */
-        __u16        pgm_ilc;                  /* 0x08c */
-        __u16        pgm_code;                 /* 0x08e */
-	__u32        trans_exc_code;           /* 0x090 */
-	__u16        mon_class_num;            /* 0x094 */
-	__u16        per_perc_atmid;           /* 0x096 */
-	__u32        per_address;              /* 0x098 */
-	__u32        monitor_code;             /* 0x09c */
-	__u8         exc_access_id;            /* 0x0a0 */
-	__u8         per_access_id;            /* 0x0a1 */
-	__u8         pad2[0xB8-0xA2];          /* 0x0a2 */
-	__u16        subchannel_id;            /* 0x0b8 */
-	__u16        subchannel_nr;            /* 0x0ba */
-	__u32        io_int_parm;              /* 0x0bc */
-	__u32        io_int_word;              /* 0x0c0 */
-	__u8	     pad3[0xc8-0xc4];	       /* 0x0c4 */
-	__u32	     stfl_fac_list;	       /* 0x0c8 */
-	__u8	     pad4[0xd4-0xcc];	       /* 0x0cc */
-	__u32        extended_save_area_addr;  /* 0x0d4 */
-	__u32        cpu_timer_save_area[2];   /* 0x0d8 */
-	__u32        clock_comp_save_area[2];  /* 0x0e0 */
-	__u32        mcck_interruption_code[2]; /* 0x0e8 */
-	__u8	     pad5[0xf4-0xf0];	       /* 0x0f0 */
-	__u32        external_damage_code;     /* 0x0f4 */
-	__u32        failing_storage_address;  /* 0x0f8 */
-	__u8	     pad6[0x100-0xfc];	       /* 0x0fc */
-	__u32        st_status_fixed_logout[4];/* 0x100 */
-	__u8	     pad7[0x120-0x110];        /* 0x110 */
-	__u32        access_regs_save_area[16];/* 0x120 */
-	__u32        floating_pt_save_area[8]; /* 0x160 */
-	__u32        gpregs_save_area[16];     /* 0x180 */
-	__u32        cregs_save_area[16];      /* 0x1c0 */	
-
-        psw_t        return_psw;               /* 0x200 */
-	__u8	     irb[64];		       /* 0x208 */
-	__u64        sync_enter_timer;         /* 0x248 */
-	__u64        async_enter_timer;        /* 0x250 */
-	__u64        exit_timer;               /* 0x258 */
-	__u64        last_update_timer;        /* 0x260 */
-	__u64        user_timer;               /* 0x268 */
-	__u64        system_timer;             /* 0x270 */
-	__u64        last_update_clock;        /* 0x278 */
-	__u64        steal_clock;              /* 0x280 */
-        psw_t        return_mcck_psw;          /* 0x288 */
-	__u8         pad8[0xc00-0x290];        /* 0x290 */
-
-        /* System info area */
-	__u32        save_area[16];            /* 0xc00 */
-	__u32        kernel_stack;             /* 0xc40 */
-	__u32        thread_info;              /* 0xc44 */
-	__u32        async_stack;              /* 0xc48 */
-	__u32        kernel_asce;              /* 0xc4c */
-	__u32        user_asce;                /* 0xc50 */
-	__u32        panic_stack;              /* 0xc54 */
-	__u32	     user_exec_asce;	       /* 0xc58 */
-	__u8	     pad10[0xc60-0xc5c];       /* 0xc5c */
-	/* entry.S sensitive area start */
-	struct       cpuinfo_S390 cpu_data;    /* 0xc60 */
-	__u32        ipl_device;               /* 0xc7c */
-	/* entry.S sensitive area end */
-
-        /* SMP info area: defined by DJB */
-	__u64	     clock_comparator;	       /* 0xc80 */
-	__u32        ext_call_fast;            /* 0xc88 */
-	__u32        percpu_offset;            /* 0xc8c */
-	__u32        current_task;	       /* 0xc90 */
-	__u32        softirq_pending;	       /* 0xc94 */
-	__u64        int_clock;                /* 0xc98 */
-        __u8         pad11[0xe00-0xca0];       /* 0xca0 */
-
-        /* 0xe00 is used as indicator for dump tools */
-        /* whether the kernel died with panic() or not */
-        __u32        panic_magic;              /* 0xe00 */
-
-        /* Align to the top 1k of prefix area */
-	__u8         pad12[0x1000-0xe04];      /* 0xe04 */
-#else /* !__s390x__ */
-        /* prefix area: defined by architecture */
-	__u32        ccw1[2];                  /* 0x000 */
-	__u32        ccw2[4];                  /* 0x008 */
-	__u8         pad1[0x80-0x18];          /* 0x018 */
-	__u32        ext_params;               /* 0x080 */
-	__u16        cpu_addr;                 /* 0x084 */
-	__u16        ext_int_code;             /* 0x086 */
-        __u16        svc_ilc;                  /* 0x088 */
-        __u16        svc_code;                 /* 0x08a */
-        __u16        pgm_ilc;                  /* 0x08c */
-        __u16        pgm_code;                 /* 0x08e */
-	__u32        data_exc_code;            /* 0x090 */
-	__u16        mon_class_num;            /* 0x094 */
-	__u16        per_perc_atmid;           /* 0x096 */
-	addr_t       per_address;              /* 0x098 */
-	__u8         exc_access_id;            /* 0x0a0 */
-	__u8         per_access_id;            /* 0x0a1 */
-	__u8         op_access_id;             /* 0x0a2 */
-	__u8         ar_access_id;             /* 0x0a3 */
-	__u8         pad2[0xA8-0xA4];          /* 0x0a4 */
-	addr_t       trans_exc_code;           /* 0x0A0 */
-	addr_t       monitor_code;             /* 0x09c */
-	__u16        subchannel_id;            /* 0x0b8 */
-	__u16        subchannel_nr;            /* 0x0ba */
-	__u32        io_int_parm;              /* 0x0bc */
-	__u32        io_int_word;              /* 0x0c0 */
-	__u8         pad3[0xc8-0xc4];          /* 0x0c4 */
-	__u32        stfl_fac_list;            /* 0x0c8 */
-	__u8         pad4[0xe8-0xcc];          /* 0x0cc */
-	__u32        mcck_interruption_code[2]; /* 0x0e8 */
-	__u8         pad5[0xf4-0xf0];          /* 0x0f0 */
-	__u32        external_damage_code;     /* 0x0f4 */
-	addr_t       failing_storage_address;  /* 0x0f8 */
-	__u8         pad6[0x120-0x100];        /* 0x100 */
-	psw_t        restart_old_psw;          /* 0x120 */
-	psw_t        external_old_psw;         /* 0x130 */
-	psw_t        svc_old_psw;              /* 0x140 */
-	psw_t        program_old_psw;          /* 0x150 */
-	psw_t        mcck_old_psw;             /* 0x160 */
-	psw_t        io_old_psw;               /* 0x170 */
-	__u8         pad7[0x1a0-0x180];        /* 0x180 */
-	psw_t        restart_psw;              /* 0x1a0 */
-	psw_t        external_new_psw;         /* 0x1b0 */
-	psw_t        svc_new_psw;              /* 0x1c0 */
-	psw_t        program_new_psw;          /* 0x1d0 */
-	psw_t        mcck_new_psw;             /* 0x1e0 */
-	psw_t        io_new_psw;               /* 0x1f0 */
-        psw_t        return_psw;               /* 0x200 */
-	__u8	     irb[64];		       /* 0x210 */
-	__u64        sync_enter_timer;         /* 0x250 */
-	__u64        async_enter_timer;        /* 0x258 */
-	__u64        exit_timer;               /* 0x260 */
-	__u64        last_update_timer;        /* 0x268 */
-	__u64        user_timer;               /* 0x270 */
-	__u64        system_timer;             /* 0x278 */
-	__u64        last_update_clock;        /* 0x280 */
-	__u64        steal_clock;              /* 0x288 */
-        psw_t        return_mcck_psw;          /* 0x290 */
-        __u8         pad8[0xc00-0x2a0];        /* 0x2a0 */
-        /* System info area */
-	__u64        save_area[16];            /* 0xc00 */
-        __u8         pad9[0xd40-0xc80];        /* 0xc80 */
- 	__u64        kernel_stack;             /* 0xd40 */
-	__u64        thread_info;              /* 0xd48 */
-	__u64        async_stack;              /* 0xd50 */
-	__u64        kernel_asce;              /* 0xd58 */
-	__u64        user_asce;                /* 0xd60 */
-	__u64        panic_stack;              /* 0xd68 */
-	__u64	     user_exec_asce;	       /* 0xd70 */
-	__u8	     pad10[0xd80-0xd78];       /* 0xd78 */
-	/* entry.S sensitive area start */
-	struct       cpuinfo_S390 cpu_data;    /* 0xd80 */
-	__u32        ipl_device;               /* 0xdb8 */
-	__u32        pad11;                    /* 0xdbc */
-	/* entry.S sensitive area end */
-
-        /* SMP info area: defined by DJB */
-	__u64	     clock_comparator;	       /* 0xdc0 */
-	__u64        ext_call_fast;            /* 0xdc8 */
-	__u64        percpu_offset;            /* 0xdd0 */
-	__u64        current_task;	       /* 0xdd8 */
-	__u32	     softirq_pending;	       /* 0xde0 */
-	__u32	     pad_0x0de4;	       /* 0xde4 */
-	__u64        int_clock;                /* 0xde8 */
-        __u8         pad12[0xe00-0xdf0];       /* 0xdf0 */
-
-        /* 0xe00 is used as indicator for dump tools */
-        /* whether the kernel died with panic() or not */
-        __u32        panic_magic;              /* 0xe00 */
-
-	__u8         pad13[0x11b8-0xe04];      /* 0xe04 */
-
-	/* 64 bit extparam used for pfault, diag 250 etc  */
-	__u64        ext_params2;               /* 0x11B8 */
-
-	__u8         pad14[0x1200-0x11C0];      /* 0x11C0 */
-
-        /* System info area */ 
-
-	__u64        floating_pt_save_area[16]; /* 0x1200 */
-	__u64        gpregs_save_area[16];      /* 0x1280 */
-	__u32        st_status_fixed_logout[4]; /* 0x1300 */
-	__u8         pad15[0x1318-0x1310];      /* 0x1310 */
-	__u32        prefixreg_save_area;       /* 0x1318 */
-	__u32        fpt_creg_save_area;        /* 0x131c */
-	__u8         pad16[0x1324-0x1320];      /* 0x1320 */
-	__u32        tod_progreg_save_area;     /* 0x1324 */
-	__u32        cpu_timer_save_area[2];    /* 0x1328 */
-	__u32        clock_comp_save_area[2];   /* 0x1330 */
-	__u8         pad17[0x1340-0x1338];      /* 0x1338 */
-	__u32        access_regs_save_area[16]; /* 0x1340 */ 
-	__u64        cregs_save_area[16];       /* 0x1380 */
-
-	/* align to the top of the prefix area */
-
-	__u8         pad18[0x2000-0x1400];      /* 0x1400 */
-#endif /* !__s390x__ */
-} __attribute__((packed)); /* End structure*/
-
-#define S390_lowcore (*((struct _lowcore *) 0))
-extern struct _lowcore *lowcore_ptr[];
-
-static inline void set_prefix(__u32 address)
-{
-	asm volatile("spx %0" : : "m" (address) : "memory");
-}
-
-static inline __u32 store_prefix(void)
-{
-	__u32 address;
-
-	asm volatile("stpx %0" : "=m" (address));
-	return address;
-}
-
-#define __PANIC_MAGIC           0xDEADC0DE
-
-#endif
-
-#endif
diff --git a/include/asm-s390/mathemu.h b/include/asm-s390/mathemu.h
deleted file mode 100644
index e8dd1ba8edb0..000000000000
--- a/include/asm-s390/mathemu.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  arch/s390/kernel/mathemu.h
- *    IEEE floating point emulation.
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- */
-
-#ifndef __MATHEMU__
-#define __MATHEMU__
-
-extern int math_emu_b3(__u8 *, struct pt_regs *);
-extern int math_emu_ed(__u8 *, struct pt_regs *);
-extern int math_emu_ldr(__u8 *);
-extern int math_emu_ler(__u8 *);
-extern int math_emu_std(__u8 *, struct pt_regs *);
-extern int math_emu_ld(__u8 *, struct pt_regs *);
-extern int math_emu_ste(__u8 *, struct pt_regs *);
-extern int math_emu_le(__u8 *, struct pt_regs *);
-extern int math_emu_lfpc(__u8 *, struct pt_regs *);
-extern int math_emu_stfpc(__u8 *, struct pt_regs *);
-extern int math_emu_srnm(__u8 *, struct pt_regs *);
-
-#endif                                 /* __MATHEMU__                      */
-
-
-
-
diff --git a/include/asm-s390/mman.h b/include/asm-s390/mman.h
deleted file mode 100644
index 7839767d837e..000000000000
--- a/include/asm-s390/mman.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  include/asm-s390/mman.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/mman.h"
- */
-
-#ifndef __S390_MMAN_H__
-#define __S390_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __S390_MMAN_H__ */
diff --git a/include/asm-s390/mmu.h b/include/asm-s390/mmu.h
deleted file mode 100644
index 5dd5e7b3476f..000000000000
--- a/include/asm-s390/mmu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-typedef struct {
-	struct list_head crst_list;
-	struct list_head pgtable_list;
-	unsigned long asce_bits;
-	unsigned long asce_limit;
-	int noexec;
-	int pgstes;
-} mm_context_t;
-
-#endif
diff --git a/include/asm-s390/mmu_context.h b/include/asm-s390/mmu_context.h
deleted file mode 100644
index 4c2fbf48c9c4..000000000000
--- a/include/asm-s390/mmu_context.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  include/asm-s390/mmu_context.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/mmu_context.h"
- */
-
-#ifndef __S390_MMU_CONTEXT_H
-#define __S390_MMU_CONTEXT_H
-
-#include <asm/pgalloc.h>
-#include <asm/uaccess.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline int init_new_context(struct task_struct *tsk,
-				   struct mm_struct *mm)
-{
-	mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
-#ifdef CONFIG_64BIT
-	mm->context.asce_bits |= _ASCE_TYPE_REGION3;
-#endif
-	if (current->mm->context.pgstes) {
-		mm->context.noexec = 0;
-		mm->context.pgstes = 1;
-	} else {
-		mm->context.noexec = s390_noexec;
-		mm->context.pgstes = 0;
-	}
-	mm->context.asce_limit = STACK_TOP_MAX;
-	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
-	return 0;
-}
-
-#define destroy_context(mm)             do { } while (0)
-
-#ifndef __s390x__
-#define LCTL_OPCODE "lctl"
-#else
-#define LCTL_OPCODE "lctlg"
-#endif
-
-static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk)
-{
-	pgd_t *pgd = mm->pgd;
-
-	S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
-	if (switch_amode) {
-		/* Load primary space page table origin. */
-		pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd;
-		S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd);
-		asm volatile(LCTL_OPCODE" 1,1,%0\n"
-			     : : "m" (S390_lowcore.user_exec_asce) );
-	} else
-		/* Load home space page table origin. */
-		asm volatile(LCTL_OPCODE" 13,13,%0"
-			     : : "m" (S390_lowcore.user_asce) );
-	set_fs(current->thread.mm_segment);
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	cpu_set(smp_processor_id(), next->cpu_vm_mask);
-	update_mm(next, tsk);
-}
-
-#define enter_lazy_tlb(mm,tsk)	do { } while (0)
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-static inline void activate_mm(struct mm_struct *prev,
-                               struct mm_struct *next)
-{
-        switch_mm(prev, next, current);
-}
-
-#endif /* __S390_MMU_CONTEXT_H */
diff --git a/include/asm-s390/module.h b/include/asm-s390/module.h
deleted file mode 100644
index 1cc1c5af705a..000000000000
--- a/include/asm-s390/module.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _ASM_S390_MODULE_H
-#define _ASM_S390_MODULE_H
-/*
- * This file contains the s390 architecture specific module code.
- */
-
-struct mod_arch_syminfo
-{
-	unsigned long got_offset;
-	unsigned long plt_offset;
-	int got_initialized;
-	int plt_initialized;
-};
-
-struct mod_arch_specific
-{
-	/* Starting offset of got in the module core memory. */
-	unsigned long got_offset;
-	/* Starting offset of plt in the module core memory. */
-	unsigned long plt_offset;
-	/* Size of the got. */
-	unsigned long got_size;
-	/* Size of the plt. */
-	unsigned long plt_size;
-	/* Number of symbols in syminfo. */
-	int nsyms;
-	/* Additional symbol information (got and plt offsets). */
-	struct mod_arch_syminfo *syminfo;
-};
-
-#ifdef __s390x__
-#define ElfW(x) Elf64_ ## x
-#define ELFW(x) ELF64_ ## x
-#else
-#define ElfW(x) Elf32_ ## x
-#define ELFW(x) ELF32_ ## x
-#endif
-
-#define Elf_Addr ElfW(Addr)
-#define Elf_Rela ElfW(Rela)
-#define Elf_Shdr ElfW(Shdr)
-#define Elf_Sym ElfW(Sym)
-#define Elf_Ehdr ElfW(Ehdr)
-#define ELF_R_SYM ELFW(R_SYM)
-#define ELF_R_TYPE ELFW(R_TYPE)
-#endif /* _ASM_S390_MODULE_H */
diff --git a/include/asm-s390/monwriter.h b/include/asm-s390/monwriter.h
deleted file mode 100644
index f0cbf96c52e6..000000000000
--- a/include/asm-s390/monwriter.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-s390/monwriter.h
- *
- * Copyright (C) IBM Corp. 2006
- * Character device driver for writing z/VM APPLDATA monitor records
- * Version 1.0
- * Author(s): Melissa Howland <melissah@us.ibm.com>
- *
- */
-
-#ifndef _ASM_390_MONWRITER_H
-#define _ASM_390_MONWRITER_H
-
-/* mon_function values */
-#define MONWRITE_START_INTERVAL	0x00 /* start interval recording */
-#define MONWRITE_STOP_INTERVAL	0x01 /* stop interval or config recording */
-#define MONWRITE_GEN_EVENT	0x02 /* generate event record */
-#define MONWRITE_START_CONFIG	0x03 /* start configuration recording */
-
-/* the header the app uses in its write() data */
-struct monwrite_hdr {
-	unsigned char mon_function;
-	unsigned short applid;
-	unsigned char record_num;
-	unsigned short version;
-	unsigned short release;
-	unsigned short mod_level;
-	unsigned short datalen;
-	unsigned char hdrlen;
-
-} __attribute__((packed));
-
-#endif /* _ASM_390_MONWRITER_H */
diff --git a/include/asm-s390/msgbuf.h b/include/asm-s390/msgbuf.h
deleted file mode 100644
index 1bbdee927924..000000000000
--- a/include/asm-s390/msgbuf.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _S390_MSGBUF_H
-#define _S390_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for S/390 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-#ifndef __s390x__
-	unsigned long	__unused1;
-#endif /* ! __s390x__ */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#ifndef __s390x__
-	unsigned long	__unused2;
-#endif /* ! __s390x__ */
-	__kernel_time_t msg_ctime;	/* last change time */
-#ifndef __s390x__
-	unsigned long	__unused3;
-#endif /* ! __s390x__ */
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _S390_MSGBUF_H */
diff --git a/include/asm-s390/mutex.h b/include/asm-s390/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-s390/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-s390/namei.h b/include/asm-s390/namei.h
deleted file mode 100644
index 3e286bdde4b0..000000000000
--- a/include/asm-s390/namei.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  include/asm-s390/namei.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/namei.h"
- *
- *  Included from linux/fs/namei.c
- */
-
-#ifndef __S390_NAMEI_H
-#define __S390_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __S390_NAMEI_H */
diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h
deleted file mode 100644
index 12fd9c4f0f15..000000000000
--- a/include/asm-s390/page.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- *  include/asm-s390/page.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com)
- */
-
-#ifndef _S390_PAGE_H
-#define _S390_PAGE_H
-
-#include <linux/const.h>
-#include <asm/types.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT      12
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK       (~(PAGE_SIZE-1))
-#define PAGE_DEFAULT_ACC	0
-#define PAGE_DEFAULT_KEY	(PAGE_DEFAULT_ACC << 4)
-
-#define HPAGE_SHIFT	20
-#define HPAGE_SIZE	(1UL << HPAGE_SHIFT)
-#define HPAGE_MASK	(~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-
-#define ARCH_HAS_SETCLEAR_HUGE_PTE
-#define ARCH_HAS_HUGE_PTE_TYPE
-#define ARCH_HAS_PREPARE_HUGEPAGE
-#define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH
-
-#include <asm/setup.h>
-#ifndef __ASSEMBLY__
-
-static inline void clear_page(void *page)
-{
-	if (MACHINE_HAS_PFMF) {
-		asm volatile(
-			"	.insn	rre,0xb9af0000,%0,%1"
-			: : "d" (0x10000), "a" (page) : "memory", "cc");
-	} else {
-		register unsigned long reg1 asm ("1") = 0;
-		register void *reg2 asm ("2") = page;
-		register unsigned long reg3 asm ("3") = 4096;
-		asm volatile(
-			"	mvcl	2,0"
-			: "+d" (reg2), "+d" (reg3) : "d" (reg1)
-			: "memory", "cc");
-	}
-}
-
-static inline void copy_page(void *to, void *from)
-{
-	if (MACHINE_HAS_MVPG) {
-		register unsigned long reg0 asm ("0") = 0;
-		asm volatile(
-			"	mvpg	%0,%1"
-			: : "a" (to), "a" (from), "d" (reg0)
-			: "memory", "cc");
-	} else
-		asm volatile(
-			"	mvc	0(256,%0),0(%1)\n"
-			"	mvc	256(256,%0),256(%1)\n"
-			"	mvc	512(256,%0),512(%1)\n"
-			"	mvc	768(256,%0),768(%1)\n"
-			"	mvc	1024(256,%0),1024(%1)\n"
-			"	mvc	1280(256,%0),1280(%1)\n"
-			"	mvc	1536(256,%0),1536(%1)\n"
-			"	mvc	1792(256,%0),1792(%1)\n"
-			"	mvc	2048(256,%0),2048(%1)\n"
-			"	mvc	2304(256,%0),2304(%1)\n"
-			"	mvc	2560(256,%0),2560(%1)\n"
-			"	mvc	2816(256,%0),2816(%1)\n"
-			"	mvc	3072(256,%0),3072(%1)\n"
-			"	mvc	3328(256,%0),3328(%1)\n"
-			"	mvc	3584(256,%0),3584(%1)\n"
-			"	mvc	3840(256,%0),3840(%1)\n"
-			: : "a" (to), "a" (from) : "memory");
-}
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pud; } pud_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef pte_t *pgtable_t;
-
-#define pgprot_val(x)	((x).pgprot)
-#define pte_val(x)	((x).pte)
-#define pmd_val(x)	((x).pmd)
-#define pud_val(x)	((x).pud)
-#define pgd_val(x)      ((x).pgd)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgd(x)        ((pgd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-/* default storage key used for all pages */
-extern unsigned int default_storage_key;
-
-static inline void
-page_set_storage_key(unsigned long addr, unsigned int skey)
-{
-	asm volatile("sske %0,%1" : : "d" (skey), "a" (addr));
-}
-
-static inline unsigned int
-page_get_storage_key(unsigned long addr)
-{
-	unsigned int skey;
-
-	asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0));
-	return skey;
-}
-
-#ifdef CONFIG_PAGE_STATES
-
-struct page;
-void arch_free_page(struct page *page, int order);
-void arch_alloc_page(struct page *page, int order);
-
-#define HAVE_ARCH_FREE_PAGE
-#define HAVE_ARCH_ALLOC_PAGE
-
-#endif
-
-#endif /* !__ASSEMBLY__ */
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)        (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-#define __PAGE_OFFSET           0x0UL
-#define PAGE_OFFSET             0x0UL
-#define __pa(x)                 (unsigned long)(x)
-#define __va(x)                 (void *)(unsigned long)(x)
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif /* _S390_PAGE_H */
diff --git a/include/asm-s390/param.h b/include/asm-s390/param.h
deleted file mode 100644
index 34aaa4603347..000000000000
--- a/include/asm-s390/param.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  include/asm-s390/param.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/param.h"
- */
-
-#ifndef _ASMS390_PARAM_H
-#define _ASMS390_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif
diff --git a/include/asm-s390/pci.h b/include/asm-s390/pci.h
deleted file mode 100644
index 42a145c9ddd6..000000000000
--- a/include/asm-s390/pci.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_S390_PCI_H
-#define __ASM_S390_PCI_H
-
-/* S/390 systems don't have a PCI bus. This file is just here because some stupid .c code
- * includes it even if CONFIG_PCI is not set.
- */
-#define PCI_DMA_BUS_IS_PHYS (0)
-
-#endif /* __ASM_S390_PCI_H */
-
diff --git a/include/asm-s390/percpu.h b/include/asm-s390/percpu.h
deleted file mode 100644
index 408d60b4f75b..000000000000
--- a/include/asm-s390/percpu.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __ARCH_S390_PERCPU__
-#define __ARCH_S390_PERCPU__
-
-#include <linux/compiler.h>
-#include <asm/lowcore.h>
-
-/*
- * s390 uses its own implementation for per cpu data, the offset of
- * the cpu local data area is cached in the cpu's lowcore memory.
- * For 64 bit module code s390 forces the use of a GOT slot for the
- * address of the per cpu variable. This is needed because the module
- * may be more than 4G above the per cpu area.
- */
-#if defined(__s390x__) && defined(MODULE)
-
-#define SHIFT_PERCPU_PTR(ptr,offset) (({			\
-	extern int simple_identifier_##var(void);	\
-	unsigned long *__ptr;				\
-	asm ( "larl %0, %1@GOTENT"		\
-	    : "=a" (__ptr) : "X" (ptr) );		\
-	(typeof(ptr))((*__ptr) + (offset));	}))
-
-#else
-
-#define SHIFT_PERCPU_PTR(ptr, offset) (({				\
-	extern int simple_identifier_##var(void);		\
-	unsigned long __ptr;					\
-	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
-	(typeof(ptr)) (__ptr + (offset)); }))
-
-#endif
-
-#define __my_cpu_offset S390_lowcore.percpu_offset
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_S390_PERCPU__ */
diff --git a/include/asm-s390/pgalloc.h b/include/asm-s390/pgalloc.h
deleted file mode 100644
index f5b2bf3d7c1d..000000000000
--- a/include/asm-s390/pgalloc.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *  include/asm-s390/pgalloc.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com)
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/pgalloc.h"
- *    Copyright (C) 1994  Linus Torvalds
- */
-
-#ifndef _S390_PGALLOC_H
-#define _S390_PGALLOC_H
-
-#include <linux/threads.h>
-#include <linux/gfp.h>
-#include <linux/mm.h>
-
-#define check_pgt_cache()	do {} while (0)
-
-unsigned long *crst_table_alloc(struct mm_struct *, int);
-void crst_table_free(struct mm_struct *, unsigned long *);
-
-unsigned long *page_table_alloc(struct mm_struct *);
-void page_table_free(struct mm_struct *, unsigned long *);
-void disable_noexec(struct mm_struct *, struct task_struct *);
-
-static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
-{
-	*s = val;
-	n = (n / 256) - 1;
-	asm volatile(
-#ifdef CONFIG_64BIT
-		"	mvc	8(248,%0),0(%0)\n"
-#else
-		"	mvc	4(252,%0),0(%0)\n"
-#endif
-		"0:	mvc	256(256,%0),0(%0)\n"
-		"	la	%0,256(%0)\n"
-		"	brct	%1,0b\n"
-		: "+a" (s), "+d" (n));
-}
-
-static inline void crst_table_init(unsigned long *crst, unsigned long entry)
-{
-	clear_table(crst, entry, sizeof(unsigned long)*2048);
-	crst = get_shadow_table(crst);
-	if (crst)
-		clear_table(crst, entry, sizeof(unsigned long)*2048);
-}
-
-#ifndef __s390x__
-
-static inline unsigned long pgd_entry_type(struct mm_struct *mm)
-{
-	return _SEGMENT_ENTRY_EMPTY;
-}
-
-#define pud_alloc_one(mm,address)		({ BUG(); ((pud_t *)2); })
-#define pud_free(mm, x)				do { } while (0)
-
-#define pmd_alloc_one(mm,address)		({ BUG(); ((pmd_t *)2); })
-#define pmd_free(mm, x)				do { } while (0)
-
-#define pgd_populate(mm, pgd, pud)		BUG()
-#define pgd_populate_kernel(mm, pgd, pud)	BUG()
-
-#define pud_populate(mm, pud, pmd)		BUG()
-#define pud_populate_kernel(mm, pud, pmd)	BUG()
-
-#else /* __s390x__ */
-
-static inline unsigned long pgd_entry_type(struct mm_struct *mm)
-{
-	if (mm->context.asce_limit <= (1UL << 31))
-		return _SEGMENT_ENTRY_EMPTY;
-	if (mm->context.asce_limit <= (1UL << 42))
-		return _REGION3_ENTRY_EMPTY;
-	return _REGION2_ENTRY_EMPTY;
-}
-
-int crst_table_upgrade(struct mm_struct *, unsigned long limit);
-void crst_table_downgrade(struct mm_struct *, unsigned long limit);
-
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	unsigned long *table = crst_table_alloc(mm, mm->context.noexec);
-	if (table)
-		crst_table_init(table, _REGION3_ENTRY_EMPTY);
-	return (pud_t *) table;
-}
-#define pud_free(mm, pud) crst_table_free(mm, (unsigned long *) pud)
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
-{
-	unsigned long *table = crst_table_alloc(mm, mm->context.noexec);
-	if (table)
-		crst_table_init(table, _SEGMENT_ENTRY_EMPTY);
-	return (pmd_t *) table;
-}
-#define pmd_free(mm, pmd) crst_table_free(mm, (unsigned long *) pmd)
-
-static inline void pgd_populate_kernel(struct mm_struct *mm,
-				       pgd_t *pgd, pud_t *pud)
-{
-	pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud);
-}
-
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
-{
-	pgd_populate_kernel(mm, pgd, pud);
-	if (mm->context.noexec) {
-		pgd = get_shadow_table(pgd);
-		pud = get_shadow_table(pud);
-		pgd_populate_kernel(mm, pgd, pud);
-	}
-}
-
-static inline void pud_populate_kernel(struct mm_struct *mm,
-				       pud_t *pud, pmd_t *pmd)
-{
-	pud_val(*pud) = _REGION3_ENTRY | __pa(pmd);
-}
-
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
-	pud_populate_kernel(mm, pud, pmd);
-	if (mm->context.noexec) {
-		pud = get_shadow_table(pud);
-		pmd = get_shadow_table(pmd);
-		pud_populate_kernel(mm, pud, pmd);
-	}
-}
-
-#endif /* __s390x__ */
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	INIT_LIST_HEAD(&mm->context.crst_list);
-	INIT_LIST_HEAD(&mm->context.pgtable_list);
-	return (pgd_t *) crst_table_alloc(mm, s390_noexec);
-}
-#define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd)
-
-static inline void pmd_populate_kernel(struct mm_struct *mm,
-				       pmd_t *pmd, pte_t *pte)
-{
-	pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte);
-}
-
-static inline void pmd_populate(struct mm_struct *mm,
-				pmd_t *pmd, pgtable_t pte)
-{
-	pmd_populate_kernel(mm, pmd, pte);
-	if (mm->context.noexec) {
-		pmd = get_shadow_table(pmd);
-		pmd_populate_kernel(mm, pmd, pte + PTRS_PER_PTE);
-	}
-}
-
-#define pmd_pgtable(pmd) \
-	(pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE)
-
-/*
- * page table entry allocation/free routines.
- */
-#define pte_alloc_one_kernel(mm, vmaddr) ((pte_t *) page_table_alloc(mm))
-#define pte_alloc_one(mm, vmaddr) ((pte_t *) page_table_alloc(mm))
-
-#define pte_free_kernel(mm, pte) page_table_free(mm, (unsigned long *) pte)
-#define pte_free(mm, pte) page_table_free(mm, (unsigned long *) pte)
-
-#endif /* _S390_PGALLOC_H */
diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h
deleted file mode 100644
index 0bdb704ae051..000000000000
--- a/include/asm-s390/pgtable.h
+++ /dev/null
@@ -1,1093 +0,0 @@
-/*
- *  include/asm-s390/pgtable.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com)
- *               Ulrich Weigand (weigand@de.ibm.com)
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/pgtable.h"
- */
-
-#ifndef _ASM_S390_PGTABLE_H
-#define _ASM_S390_PGTABLE_H
-
-/*
- * The Linux memory management assumes a three-level page table setup. For
- * s390 31 bit we "fold" the mid level into the top-level page table, so
- * that we physically have the same two-level page table as the s390 mmu
- * expects in 31 bit mode. For s390 64 bit we use three of the five levels
- * the hardware provides (region first and region second tables are not
- * used).
- *
- * The "pgd_xxx()" functions are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- *
- * This file contains the functions and defines necessary to modify and use
- * the S390 page table tree.
- */
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-#include <linux/mm_types.h>
-#include <asm/bitops.h>
-#include <asm/bug.h>
-#include <asm/processor.h>
-
-extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096)));
-extern void paging_init(void);
-extern void vmem_map_init(void);
-
-/*
- * The S390 doesn't have any external MMU info: the kernel page
- * tables contain all the necessary information.
- */
-#define update_mmu_cache(vma, address, pte)     do { } while (0)
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern char empty_zero_page[PAGE_SIZE];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-#endif /* !__ASSEMBLY__ */
-
-/*
- * PMD_SHIFT determines the size of the area a second-level page
- * table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#ifndef __s390x__
-# define PMD_SHIFT	20
-# define PUD_SHIFT	20
-# define PGDIR_SHIFT	20
-#else /* __s390x__ */
-# define PMD_SHIFT	20
-# define PUD_SHIFT	31
-# define PGDIR_SHIFT	42
-#endif /* __s390x__ */
-
-#define PMD_SIZE        (1UL << PMD_SHIFT)
-#define PMD_MASK        (~(PMD_SIZE-1))
-#define PUD_SIZE	(1UL << PUD_SHIFT)
-#define PUD_MASK	(~(PUD_SIZE-1))
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-/*
- * entries per page directory level: the S390 is two-level, so
- * we don't really have any PMD directory physically.
- * for S390 segment-table entries are combined to one PGD
- * that leads to 1024 pte per pgd
- */
-#define PTRS_PER_PTE	256
-#ifndef __s390x__
-#define PTRS_PER_PMD	1
-#define PTRS_PER_PUD	1
-#else /* __s390x__ */
-#define PTRS_PER_PMD	2048
-#define PTRS_PER_PUD	2048
-#endif /* __s390x__ */
-#define PTRS_PER_PGD	2048
-
-#define FIRST_USER_ADDRESS  0
-
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e))
-#define pmd_ERROR(e) \
-	printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e))
-#define pud_ERROR(e) \
-	printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e))
-
-#ifndef __ASSEMBLY__
-/*
- * The vmalloc area will always be on the topmost area of the kernel
- * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc,
- * which should be enough for any sane case.
- * By putting vmalloc at the top, we maximise the gap between physical
- * memory and vmalloc to catch misplaced memory accesses. As a side
- * effect, this also makes sure that 64 bit module code cannot be used
- * as system call address.
- */
-#ifndef __s390x__
-#define VMALLOC_START	0x78000000UL
-#define VMALLOC_END	0x7e000000UL
-#define VMEM_MAP_END	0x80000000UL
-#else /* __s390x__ */
-#define VMALLOC_START	0x3e000000000UL
-#define VMALLOC_END	0x3e040000000UL
-#define VMEM_MAP_END	0x40000000000UL
-#endif /* __s390x__ */
-
-/*
- * VMEM_MAX_PHYS is the highest physical address that can be added to the 1:1
- * mapping. This needs to be calculated at compile time since the size of the
- * VMEM_MAP is static but the size of struct page can change.
- */
-#define VMEM_MAX_PAGES	((VMEM_MAP_END - VMALLOC_END) / sizeof(struct page))
-#define VMEM_MAX_PFN	min(VMALLOC_START >> PAGE_SHIFT, VMEM_MAX_PAGES)
-#define VMEM_MAX_PHYS	((VMEM_MAX_PFN << PAGE_SHIFT) & ~((16 << 20) - 1))
-#define vmemmap		((struct page *) VMALLOC_END)
-
-/*
- * A 31 bit pagetable entry of S390 has following format:
- *  |   PFRA          |    |  OS  |
- * 0                   0IP0
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Page-Invalid Bit:    Page is not available for address-translation
- * P Page-Protection Bit: Store access not possible for page
- *
- * A 31 bit segmenttable entry of S390 has following format:
- *  |   P-table origin      |  |PTL
- * 0                         IC
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Segment-Invalid Bit:    Segment is not available for address-translation
- * C Common-Segment Bit:     Segment is not private (PoP 3-30)
- * PTL Page-Table-Length:    Page-table length (PTL+1*16 entries -> up to 256)
- *
- * The 31 bit segmenttable origin of S390 has following format:
- *
- *  |S-table origin   |     | STL |
- * X                   **GPS
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * X Space-Switch event:
- * G Segment-Invalid Bit:     *
- * P Private-Space Bit:       Segment is not private (PoP 3-30)
- * S Storage-Alteration:
- * STL Segment-Table-Length:  Segment-table length (STL+1*16 entries -> up to 2048)
- *
- * A 64 bit pagetable entry of S390 has following format:
- * |                     PFRA                         |0IP0|  OS  |
- * 0000000000111111111122222222223333333333444444444455555555556666
- * 0123456789012345678901234567890123456789012345678901234567890123
- *
- * I Page-Invalid Bit:    Page is not available for address-translation
- * P Page-Protection Bit: Store access not possible for page
- *
- * A 64 bit segmenttable entry of S390 has following format:
- * |        P-table origin                              |      TT
- * 0000000000111111111122222222223333333333444444444455555555556666
- * 0123456789012345678901234567890123456789012345678901234567890123
- *
- * I Segment-Invalid Bit:    Segment is not available for address-translation
- * C Common-Segment Bit:     Segment is not private (PoP 3-30)
- * P Page-Protection Bit: Store access not possible for page
- * TT Type 00
- *
- * A 64 bit region table entry of S390 has following format:
- * |        S-table origin                             |   TF  TTTL
- * 0000000000111111111122222222223333333333444444444455555555556666
- * 0123456789012345678901234567890123456789012345678901234567890123
- *
- * I Segment-Invalid Bit:    Segment is not available for address-translation
- * TT Type 01
- * TF
- * TL Table length
- *
- * The 64 bit regiontable origin of S390 has following format:
- * |      region table origon                          |       DTTL
- * 0000000000111111111122222222223333333333444444444455555555556666
- * 0123456789012345678901234567890123456789012345678901234567890123
- *
- * X Space-Switch event:
- * G Segment-Invalid Bit:  
- * P Private-Space Bit:    
- * S Storage-Alteration:
- * R Real space
- * TL Table-Length:
- *
- * A storage key has the following format:
- * | ACC |F|R|C|0|
- *  0   3 4 5 6 7
- * ACC: access key
- * F  : fetch protection bit
- * R  : referenced bit
- * C  : changed bit
- */
-
-/* Hardware bits in the page table entry */
-#define _PAGE_RO	0x200		/* HW read-only bit  */
-#define _PAGE_INVALID	0x400		/* HW invalid bit    */
-
-/* Software bits in the page table entry */
-#define _PAGE_SWT	0x001		/* SW pte type bit t */
-#define _PAGE_SWX	0x002		/* SW pte type bit x */
-#define _PAGE_SPECIAL	0x004		/* SW associated with special page */
-#define __HAVE_ARCH_PTE_SPECIAL
-
-/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_SPECIAL)
-
-/* Six different types of pages. */
-#define _PAGE_TYPE_EMPTY	0x400
-#define _PAGE_TYPE_NONE		0x401
-#define _PAGE_TYPE_SWAP		0x403
-#define _PAGE_TYPE_FILE		0x601	/* bit 0x002 is used for offset !! */
-#define _PAGE_TYPE_RO		0x200
-#define _PAGE_TYPE_RW		0x000
-#define _PAGE_TYPE_EX_RO	0x202
-#define _PAGE_TYPE_EX_RW	0x002
-
-/*
- * Only four types for huge pages, using the invalid bit and protection bit
- * of a segment table entry.
- */
-#define _HPAGE_TYPE_EMPTY	0x020	/* _SEGMENT_ENTRY_INV */
-#define _HPAGE_TYPE_NONE	0x220
-#define _HPAGE_TYPE_RO		0x200	/* _SEGMENT_ENTRY_RO  */
-#define _HPAGE_TYPE_RW		0x000
-
-/*
- * PTE type bits are rather complicated. handle_pte_fault uses pte_present,
- * pte_none and pte_file to find out the pte type WITHOUT holding the page
- * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to
- * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs
- * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards.
- * This change is done while holding the lock, but the intermediate step
- * of a previously valid pte with the hw invalid bit set can be observed by
- * handle_pte_fault. That makes it necessary that all valid pte types with
- * the hw invalid bit set must be distinguishable from the four pte types
- * empty, none, swap and file.
- *
- *			irxt  ipte  irxt
- * _PAGE_TYPE_EMPTY	1000   ->   1000
- * _PAGE_TYPE_NONE	1001   ->   1001
- * _PAGE_TYPE_SWAP	1011   ->   1011
- * _PAGE_TYPE_FILE	11?1   ->   11?1
- * _PAGE_TYPE_RO	0100   ->   1100
- * _PAGE_TYPE_RW	0000   ->   1000
- * _PAGE_TYPE_EX_RO	0110   ->   1110
- * _PAGE_TYPE_EX_RW	0010   ->   1010
- *
- * pte_none is true for bits combinations 1000, 1010, 1100, 1110
- * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001
- * pte_file is true for bits combinations 1101, 1111
- * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
- */
-
-/* Page status table bits for virtualization */
-#define RCP_PCL_BIT	55
-#define RCP_HR_BIT	54
-#define RCP_HC_BIT	53
-#define RCP_GR_BIT	50
-#define RCP_GC_BIT	49
-
-#ifndef __s390x__
-
-/* Bits in the segment table address-space-control-element */
-#define _ASCE_SPACE_SWITCH	0x80000000UL	/* space switch event	    */
-#define _ASCE_ORIGIN_MASK	0x7ffff000UL	/* segment table origin	    */
-#define _ASCE_PRIVATE_SPACE	0x100	/* private space control	    */
-#define _ASCE_ALT_EVENT		0x80	/* storage alteration event control */
-#define _ASCE_TABLE_LENGTH	0x7f	/* 128 x 64 entries = 8k	    */
-
-/* Bits in the segment table entry */
-#define _SEGMENT_ENTRY_ORIGIN	0x7fffffc0UL	/* page table origin	    */
-#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
-#define _SEGMENT_ENTRY_COMMON	0x10	/* common segment bit		    */
-#define _SEGMENT_ENTRY_PTL	0x0f	/* page table length		    */
-
-#define _SEGMENT_ENTRY		(_SEGMENT_ENTRY_PTL)
-#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
-
-#else /* __s390x__ */
-
-/* Bits in the segment/region table address-space-control-element */
-#define _ASCE_ORIGIN		~0xfffUL/* segment table origin		    */
-#define _ASCE_PRIVATE_SPACE	0x100	/* private space control	    */
-#define _ASCE_ALT_EVENT		0x80	/* storage alteration event control */
-#define _ASCE_SPACE_SWITCH	0x40	/* space switch event		    */
-#define _ASCE_REAL_SPACE	0x20	/* real space control		    */
-#define _ASCE_TYPE_MASK		0x0c	/* asce table type mask		    */
-#define _ASCE_TYPE_REGION1	0x0c	/* region first table type	    */
-#define _ASCE_TYPE_REGION2	0x08	/* region second table type	    */
-#define _ASCE_TYPE_REGION3	0x04	/* region third table type	    */
-#define _ASCE_TYPE_SEGMENT	0x00	/* segment table type		    */
-#define _ASCE_TABLE_LENGTH	0x03	/* region table length		    */
-
-/* Bits in the region table entry */
-#define _REGION_ENTRY_ORIGIN	~0xfffUL/* region/segment table origin	    */
-#define _REGION_ENTRY_INV	0x20	/* invalid region table entry	    */
-#define _REGION_ENTRY_TYPE_MASK	0x0c	/* region/segment table type mask   */
-#define _REGION_ENTRY_TYPE_R1	0x0c	/* region first table type	    */
-#define _REGION_ENTRY_TYPE_R2	0x08	/* region second table type	    */
-#define _REGION_ENTRY_TYPE_R3	0x04	/* region third table type	    */
-#define _REGION_ENTRY_LENGTH	0x03	/* region third length		    */
-
-#define _REGION1_ENTRY		(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH)
-#define _REGION1_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INV)
-#define _REGION2_ENTRY		(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH)
-#define _REGION2_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INV)
-#define _REGION3_ENTRY		(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)
-#define _REGION3_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INV)
-
-/* Bits in the segment table entry */
-#define _SEGMENT_ENTRY_ORIGIN	~0x7ffUL/* segment table origin		    */
-#define _SEGMENT_ENTRY_RO	0x200	/* page protection bit		    */
-#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
-
-#define _SEGMENT_ENTRY		(0)
-#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
-
-#define _SEGMENT_ENTRY_LARGE	0x400	/* STE-format control, large page   */
-#define _SEGMENT_ENTRY_CO	0x100	/* change-recording override   */
-
-#endif /* __s390x__ */
-
-/*
- * A user page table pointer has the space-switch-event bit, the
- * private-space-control bit and the storage-alteration-event-control
- * bit set. A kernel page table pointer doesn't need them.
- */
-#define _ASCE_USER_BITS		(_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \
-				 _ASCE_ALT_EVENT)
-
-/* Bits int the storage key */
-#define _PAGE_CHANGED    0x02          /* HW changed bit                   */
-#define _PAGE_REFERENCED 0x04          /* HW referenced bit                */
-
-/*
- * Page protection definitions.
- */
-#define PAGE_NONE	__pgprot(_PAGE_TYPE_NONE)
-#define PAGE_RO		__pgprot(_PAGE_TYPE_RO)
-#define PAGE_RW		__pgprot(_PAGE_TYPE_RW)
-#define PAGE_EX_RO	__pgprot(_PAGE_TYPE_EX_RO)
-#define PAGE_EX_RW	__pgprot(_PAGE_TYPE_EX_RW)
-
-#define PAGE_KERNEL	PAGE_RW
-#define PAGE_COPY	PAGE_RO
-
-/*
- * Dependent on the EXEC_PROTECT option s390 can do execute protection.
- * Write permission always implies read permission. In theory with a
- * primary/secondary page table execute only can be implemented but
- * it would cost an additional bit in the pte to distinguish all the
- * different pte types. To avoid that execute permission currently
- * implies read permission as well.
- */
-         /*xwr*/
-#define __P000	PAGE_NONE
-#define __P001	PAGE_RO
-#define __P010	PAGE_RO
-#define __P011	PAGE_RO
-#define __P100	PAGE_EX_RO
-#define __P101	PAGE_EX_RO
-#define __P110	PAGE_EX_RO
-#define __P111	PAGE_EX_RO
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_RO
-#define __S010	PAGE_RW
-#define __S011	PAGE_RW
-#define __S100	PAGE_EX_RO
-#define __S101	PAGE_EX_RO
-#define __S110	PAGE_EX_RW
-#define __S111	PAGE_EX_RW
-
-#ifndef __s390x__
-# define PxD_SHADOW_SHIFT	1
-#else /* __s390x__ */
-# define PxD_SHADOW_SHIFT	2
-#endif /* __s390x__ */
-
-static inline void *get_shadow_table(void *table)
-{
-	unsigned long addr, offset;
-	struct page *page;
-
-	addr = (unsigned long) table;
-	offset = addr & ((PAGE_SIZE << PxD_SHADOW_SHIFT) - 1);
-	page = virt_to_page((void *)(addr ^ offset));
-	return (void *)(addr_t)(page->index ? (page->index | offset) : 0UL);
-}
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t entry)
-{
-	*ptep = entry;
-	if (mm->context.noexec) {
-		if (!(pte_val(entry) & _PAGE_INVALID) &&
-		    (pte_val(entry) & _PAGE_SWX))
-			pte_val(entry) |= _PAGE_RO;
-		else
-			pte_val(entry) = _PAGE_TYPE_EMPTY;
-		ptep[PTRS_PER_PTE] = entry;
-	}
-}
-
-/*
- * pgd/pmd/pte query functions
- */
-#ifndef __s390x__
-
-static inline int pgd_present(pgd_t pgd) { return 1; }
-static inline int pgd_none(pgd_t pgd)    { return 0; }
-static inline int pgd_bad(pgd_t pgd)     { return 0; }
-
-static inline int pud_present(pud_t pud) { return 1; }
-static inline int pud_none(pud_t pud)	 { return 0; }
-static inline int pud_bad(pud_t pud)	 { return 0; }
-
-#else /* __s390x__ */
-
-static inline int pgd_present(pgd_t pgd)
-{
-	if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
-		return 1;
-	return (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) != 0UL;
-}
-
-static inline int pgd_none(pgd_t pgd)
-{
-	if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
-		return 0;
-	return (pgd_val(pgd) & _REGION_ENTRY_INV) != 0UL;
-}
-
-static inline int pgd_bad(pgd_t pgd)
-{
-	/*
-	 * With dynamic page table levels the pgd can be a region table
-	 * entry or a segment table entry. Check for the bit that are
-	 * invalid for either table entry.
-	 */
-	unsigned long mask =
-		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
-		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
-	return (pgd_val(pgd) & mask) != 0;
-}
-
-static inline int pud_present(pud_t pud)
-{
-	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
-		return 1;
-	return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL;
-}
-
-static inline int pud_none(pud_t pud)
-{
-	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
-		return 0;
-	return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL;
-}
-
-static inline int pud_bad(pud_t pud)
-{
-	/*
-	 * With dynamic page table levels the pud can be a region table
-	 * entry or a segment table entry. Check for the bit that are
-	 * invalid for either table entry.
-	 */
-	unsigned long mask =
-		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
-		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
-	return (pud_val(pud) & mask) != 0;
-}
-
-#endif /* __s390x__ */
-
-static inline int pmd_present(pmd_t pmd)
-{
-	return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL;
-}
-
-static inline int pmd_none(pmd_t pmd)
-{
-	return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL;
-}
-
-static inline int pmd_bad(pmd_t pmd)
-{
-	unsigned long mask = ~_SEGMENT_ENTRY_ORIGIN & ~_SEGMENT_ENTRY_INV;
-	return (pmd_val(pmd) & mask) != _SEGMENT_ENTRY;
-}
-
-static inline int pte_none(pte_t pte)
-{
-	return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT);
-}
-
-static inline int pte_present(pte_t pte)
-{
-	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX;
-	return (pte_val(pte) & mask) == _PAGE_TYPE_NONE ||
-		(!(pte_val(pte) & _PAGE_INVALID) &&
-		 !(pte_val(pte) & _PAGE_SWT));
-}
-
-static inline int pte_file(pte_t pte)
-{
-	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT;
-	return (pte_val(pte) & mask) == _PAGE_TYPE_FILE;
-}
-
-static inline int pte_special(pte_t pte)
-{
-	return (pte_val(pte) & _PAGE_SPECIAL);
-}
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(a,b)  (pte_val(a) == pte_val(b))
-
-static inline void rcp_lock(pte_t *ptep)
-{
-#ifdef CONFIG_PGSTE
-	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
-	preempt_disable();
-	while (test_and_set_bit(RCP_PCL_BIT, pgste))
-		;
-#endif
-}
-
-static inline void rcp_unlock(pte_t *ptep)
-{
-#ifdef CONFIG_PGSTE
-	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
-	clear_bit(RCP_PCL_BIT, pgste);
-	preempt_enable();
-#endif
-}
-
-/* forward declaration for SetPageUptodate in page-flags.h*/
-static inline void page_clear_dirty(struct page *page);
-#include <linux/page-flags.h>
-
-static inline void ptep_rcp_copy(pte_t *ptep)
-{
-#ifdef CONFIG_PGSTE
-	struct page *page = virt_to_page(pte_val(*ptep));
-	unsigned int skey;
-	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
-
-	skey = page_get_storage_key(page_to_phys(page));
-	if (skey & _PAGE_CHANGED)
-		set_bit_simple(RCP_GC_BIT, pgste);
-	if (skey & _PAGE_REFERENCED)
-		set_bit_simple(RCP_GR_BIT, pgste);
-	if (test_and_clear_bit_simple(RCP_HC_BIT, pgste))
-		SetPageDirty(page);
-	if (test_and_clear_bit_simple(RCP_HR_BIT, pgste))
-		SetPageReferenced(page);
-#endif
-}
-
-/*
- * query functions pte_write/pte_dirty/pte_young only work if
- * pte_present() is true. Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte)
-{
-	return (pte_val(pte) & _PAGE_RO) == 0;
-}
-
-static inline int pte_dirty(pte_t pte)
-{
-	/* A pte is neither clean nor dirty on s/390. The dirty bit
-	 * is in the storage key. See page_test_and_clear_dirty for
-	 * details.
-	 */
-	return 0;
-}
-
-static inline int pte_young(pte_t pte)
-{
-	/* A pte is neither young nor old on s/390. The young bit
-	 * is in the storage key. See page_test_and_clear_young for
-	 * details.
-	 */
-	return 0;
-}
-
-/*
- * pgd/pmd/pte modification functions
- */
-
-#ifndef __s390x__
-
-#define pgd_clear(pgd)		do { } while (0)
-#define pud_clear(pud)		do { } while (0)
-
-#else /* __s390x__ */
-
-static inline void pgd_clear_kernel(pgd_t * pgd)
-{
-	if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
-		pgd_val(*pgd) = _REGION2_ENTRY_EMPTY;
-}
-
-static inline void pgd_clear(pgd_t * pgd)
-{
-	pgd_t *shadow = get_shadow_table(pgd);
-
-	pgd_clear_kernel(pgd);
-	if (shadow)
-		pgd_clear_kernel(shadow);
-}
-
-static inline void pud_clear_kernel(pud_t *pud)
-{
-	if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
-		pud_val(*pud) = _REGION3_ENTRY_EMPTY;
-}
-
-static inline void pud_clear(pud_t *pud)
-{
-	pud_t *shadow = get_shadow_table(pud);
-
-	pud_clear_kernel(pud);
-	if (shadow)
-		pud_clear_kernel(shadow);
-}
-
-#endif /* __s390x__ */
-
-static inline void pmd_clear_kernel(pmd_t * pmdp)
-{
-	pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY;
-}
-
-static inline void pmd_clear(pmd_t *pmd)
-{
-	pmd_t *shadow = get_shadow_table(pmd);
-
-	pmd_clear_kernel(pmd);
-	if (shadow)
-		pmd_clear_kernel(shadow);
-}
-
-static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	if (mm->context.pgstes)
-		ptep_rcp_copy(ptep);
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
-	if (mm->context.noexec)
-		pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
-}
-
-/*
- * The following pte modification functions only work if
- * pte_present() is true. Undefined behaviour if not..
- */
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) &= _PAGE_CHG_MASK;
-	pte_val(pte) |= pgprot_val(newprot);
-	return pte;
-}
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	/* Do not clobber _PAGE_TYPE_NONE pages!  */
-	if (!(pte_val(pte) & _PAGE_INVALID))
-		pte_val(pte) |= _PAGE_RO;
-	return pte;
-}
-
-static inline pte_t pte_mkwrite(pte_t pte)
-{
-	pte_val(pte) &= ~_PAGE_RO;
-	return pte;
-}
-
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	/* The only user of pte_mkclean is the fork() code.
-	   We must *not* clear the *physical* page dirty bit
-	   just because fork() wants to clear the dirty bit in
-	   *one* of the page's mappings.  So we just do nothing. */
-	return pte;
-}
-
-static inline pte_t pte_mkdirty(pte_t pte)
-{
-	/* We do not explicitly set the dirty bit because the
-	 * sske instruction is slow. It is faster to let the
-	 * next instruction set the dirty bit.
-	 */
-	return pte;
-}
-
-static inline pte_t pte_mkold(pte_t pte)
-{
-	/* S/390 doesn't keep its dirty/referenced bit in the pte.
-	 * There is no point in clearing the real referenced bit.
-	 */
-	return pte;
-}
-
-static inline pte_t pte_mkyoung(pte_t pte)
-{
-	/* S/390 doesn't keep its dirty/referenced bit in the pte.
-	 * There is no point in setting the real referenced bit.
-	 */
-	return pte;
-}
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	pte_val(pte) |= _PAGE_SPECIAL;
-	return pte;
-}
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
-					    unsigned long addr, pte_t *ptep)
-{
-#ifdef CONFIG_PGSTE
-	unsigned long physpage;
-	int young;
-	unsigned long *pgste;
-
-	if (!vma->vm_mm->context.pgstes)
-		return 0;
-	physpage = pte_val(*ptep) & PAGE_MASK;
-	pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
-
-	young = ((page_get_storage_key(physpage) & _PAGE_REFERENCED) != 0);
-	rcp_lock(ptep);
-	if (young)
-		set_bit_simple(RCP_GR_BIT, pgste);
-	young |= test_and_clear_bit_simple(RCP_HR_BIT, pgste);
-	rcp_unlock(ptep);
-	return young;
-#endif
-	return 0;
-}
-
-#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
-					 unsigned long address, pte_t *ptep)
-{
-	/* No need to flush TLB
-	 * On s390 reference bits are in storage key and never in TLB
-	 * With virtualization we handle the reference bit, without we
-	 * we can simply return */
-#ifdef CONFIG_PGSTE
-	return ptep_test_and_clear_young(vma, address, ptep);
-#endif
-	return 0;
-}
-
-static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
-{
-	if (!(pte_val(*ptep) & _PAGE_INVALID)) {
-#ifndef __s390x__
-		/* pto must point to the start of the segment table */
-		pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00);
-#else
-		/* ipte in zarch mode can do the math */
-		pte_t *pto = ptep;
-#endif
-		asm volatile(
-			"	ipte	%2,%3"
-			: "=m" (*ptep) : "m" (*ptep),
-			  "a" (pto), "a" (address));
-	}
-}
-
-static inline void ptep_invalidate(struct mm_struct *mm,
-				   unsigned long address, pte_t *ptep)
-{
-	if (mm->context.pgstes) {
-		rcp_lock(ptep);
-		__ptep_ipte(address, ptep);
-		ptep_rcp_copy(ptep);
-		pte_val(*ptep) = _PAGE_TYPE_EMPTY;
-		rcp_unlock(ptep);
-		return;
-	}
-	__ptep_ipte(address, ptep);
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
-	if (mm->context.noexec) {
-		__ptep_ipte(address, ptep + PTRS_PER_PTE);
-		pte_val(*(ptep + PTRS_PER_PTE)) = _PAGE_TYPE_EMPTY;
-	}
-}
-
-/*
- * This is hard to understand. ptep_get_and_clear and ptep_clear_flush
- * both clear the TLB for the unmapped pte. The reason is that
- * ptep_get_and_clear is used in common code (e.g. change_pte_range)
- * to modify an active pte. The sequence is
- *   1) ptep_get_and_clear
- *   2) set_pte_at
- *   3) flush_tlb_range
- * On s390 the tlb needs to get flushed with the modification of the pte
- * if the pte is active. The only way how this can be implemented is to
- * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range
- * is a nop.
- */
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-#define ptep_get_and_clear(__mm, __address, __ptep)			\
-({									\
-	pte_t __pte = *(__ptep);					\
-	if (atomic_read(&(__mm)->mm_users) > 1 ||			\
-	    (__mm) != current->active_mm)				\
-		ptep_invalidate(__mm, __address, __ptep);		\
-	else								\
-		pte_clear((__mm), (__address), (__ptep));		\
-	__pte;								\
-})
-
-#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
-static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
-				     unsigned long address, pte_t *ptep)
-{
-	pte_t pte = *ptep;
-	ptep_invalidate(vma->vm_mm, address, ptep);
-	return pte;
-}
-
-/*
- * The batched pte unmap code uses ptep_get_and_clear_full to clear the
- * ptes. Here an optimization is possible. tlb_gather_mmu flushes all
- * tlbs of an mm if it can guarantee that the ptes of the mm_struct
- * cannot be accessed while the batched unmap is running. In this case
- * full==1 and a simple pte_clear is enough. See tlb.h.
- */
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
-static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
-					    unsigned long addr,
-					    pte_t *ptep, int full)
-{
-	pte_t pte = *ptep;
-
-	if (full)
-		pte_clear(mm, addr, ptep);
-	else
-		ptep_invalidate(mm, addr, ptep);
-	return pte;
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-#define ptep_set_wrprotect(__mm, __addr, __ptep)			\
-({									\
-	pte_t __pte = *(__ptep);					\
-	if (pte_write(__pte)) {						\
-		if (atomic_read(&(__mm)->mm_users) > 1 ||		\
-		    (__mm) != current->active_mm)			\
-			ptep_invalidate(__mm, __addr, __ptep);		\
-		set_pte_at(__mm, __addr, __ptep, pte_wrprotect(__pte));	\
-	}								\
-})
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty)	\
-({									\
-	int __changed = !pte_same(*(__ptep), __entry);			\
-	if (__changed) {						\
-		ptep_invalidate((__vma)->vm_mm, __addr, __ptep);	\
-		set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);	\
-	}								\
-	__changed;							\
-})
-
-/*
- * Test and clear dirty bit in storage key.
- * We can't clear the changed bit atomically. This is a potential
- * race against modification of the referenced bit. This function
- * should therefore only be called if it is not mapped in any
- * address space.
- */
-#define __HAVE_ARCH_PAGE_TEST_DIRTY
-static inline int page_test_dirty(struct page *page)
-{
-	return (page_get_storage_key(page_to_phys(page)) & _PAGE_CHANGED) != 0;
-}
-
-#define __HAVE_ARCH_PAGE_CLEAR_DIRTY
-static inline void page_clear_dirty(struct page *page)
-{
-	page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY);
-}
-
-/*
- * Test and clear referenced bit in storage key.
- */
-#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
-static inline int page_test_and_clear_young(struct page *page)
-{
-	unsigned long physpage = page_to_phys(page);
-	int ccode;
-
-	asm volatile(
-		"	rrbe	0,%1\n"
-		"	ipm	%0\n"
-		"	srl	%0,28\n"
-		: "=d" (ccode) : "a" (physpage) : "cc" );
-	return ccode & 2;
-}
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
-{
-	pte_t __pte;
-	pte_val(__pte) = physpage + pgprot_val(pgprot);
-	return __pte;
-}
-
-static inline pte_t mk_pte(struct page *page, pgprot_t pgprot)
-{
-	unsigned long physpage = page_to_phys(page);
-
-	return mk_pte_phys(physpage, pgprot);
-}
-
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
-#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
-#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
-
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-#ifndef __s390x__
-
-#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
-#define pud_deref(pmd) ({ BUG(); 0UL; })
-#define pgd_deref(pmd) ({ BUG(); 0UL; })
-
-#define pud_offset(pgd, address) ((pud_t *) pgd)
-#define pmd_offset(pud, address) ((pmd_t *) pud + pmd_index(address))
-
-#else /* __s390x__ */
-
-#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
-#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN)
-#define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN)
-
-static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
-{
-	pud_t *pud = (pud_t *) pgd;
-	if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
-		pud = (pud_t *) pgd_deref(*pgd);
-	return pud  + pud_index(address);
-}
-
-static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
-{
-	pmd_t *pmd = (pmd_t *) pud;
-	if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
-		pmd = (pmd_t *) pud_deref(*pud);
-	return pmd + pmd_index(address);
-}
-
-#endif /* __s390x__ */
-
-#define pfn_pte(pfn,pgprot) mk_pte_phys(__pa((pfn) << PAGE_SHIFT),(pgprot))
-#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
-
-/* Find an entry in the lowest level page table.. */
-#define pte_offset(pmd, addr) ((pte_t *) pmd_deref(*(pmd)) + pte_index(addr))
-#define pte_offset_kernel(pmd, address) pte_offset(pmd,address)
-#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
-#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address)
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
-
-/*
- * 31 bit swap entry format:
- * A page-table entry has some bits we have to treat in a special way.
- * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
- * exception will occur instead of a page translation exception. The
- * specifiation exception has the bad habit not to store necessary
- * information in the lowcore.
- * Bit 21 and bit 22 are the page invalid bit and the page protection
- * bit. We set both to indicate a swapped page.
- * Bit 30 and 31 are used to distinguish the different page types. For
- * a swapped page these bits need to be zero.
- * This leaves the bits 1-19 and bits 24-29 to store type and offset.
- * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
- * plus 24 for the offset.
- * 0|     offset        |0110|o|type |00|
- * 0 0000000001111111111 2222 2 22222 33
- * 0 1234567890123456789 0123 4 56789 01
- *
- * 64 bit swap entry format:
- * A page-table entry has some bits we have to treat in a special way.
- * Bits 52 and bit 55 have to be zero, otherwise an specification
- * exception will occur instead of a page translation exception. The
- * specifiation exception has the bad habit not to store necessary
- * information in the lowcore.
- * Bit 53 and bit 54 are the page invalid bit and the page protection
- * bit. We set both to indicate a swapped page.
- * Bit 62 and 63 are used to distinguish the different page types. For
- * a swapped page these bits need to be zero.
- * This leaves the bits 0-51 and bits 56-61 to store type and offset.
- * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
- * plus 56 for the offset.
- * |                      offset                        |0110|o|type |00|
- *  0000000000111111111122222222223333333333444444444455 5555 5 55566 66
- *  0123456789012345678901234567890123456789012345678901 2345 6 78901 23
- */
-#ifndef __s390x__
-#define __SWP_OFFSET_MASK (~0UL >> 12)
-#else
-#define __SWP_OFFSET_MASK (~0UL >> 11)
-#endif
-static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
-{
-	pte_t pte;
-	offset &= __SWP_OFFSET_MASK;
-	pte_val(pte) = _PAGE_TYPE_SWAP | ((type & 0x1f) << 2) |
-		((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
-	return pte;
-}
-
-#define __swp_type(entry)	(((entry).val >> 2) & 0x1f)
-#define __swp_offset(entry)	(((entry).val >> 11) | (((entry).val >> 7) & 1))
-#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
-
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-#ifndef __s390x__
-# define PTE_FILE_MAX_BITS	26
-#else /* __s390x__ */
-# define PTE_FILE_MAX_BITS	59
-#endif /* __s390x__ */
-
-#define pte_to_pgoff(__pte) \
-	((((__pte).pte >> 12) << 7) + (((__pte).pte >> 1) & 0x7f))
-
-#define pgoff_to_pte(__off) \
-	((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \
-		   | _PAGE_TYPE_FILE })
-
-#endif /* !__ASSEMBLY__ */
-
-#define kern_addr_valid(addr)   (1)
-
-extern int vmem_add_mapping(unsigned long start, unsigned long size);
-extern int vmem_remove_mapping(unsigned long start, unsigned long size);
-extern int s390_enable_sie(void);
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _S390_PAGE_H */
diff --git a/include/asm-s390/poll.h b/include/asm-s390/poll.h
deleted file mode 100644
index c98509d3149e..000000000000
--- a/include/asm-s390/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-s390/posix_types.h b/include/asm-s390/posix_types.h
deleted file mode 100644
index 397d93fba3a7..000000000000
--- a/include/asm-s390/posix_types.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *  include/asm-s390/posix_types.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/posix_types.h"
- */
-
-#ifndef __ARCH_S390_POSIX_TYPES_H
-#define __ARCH_S390_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef long            __kernel_off_t;
-typedef int             __kernel_pid_t;
-typedef unsigned long   __kernel_size_t;
-typedef long            __kernel_time_t;
-typedef long            __kernel_suseconds_t;
-typedef long            __kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int             __kernel_daddr_t;
-typedef char *          __kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-
-#ifdef __GNUC__
-typedef long long       __kernel_loff_t;
-#endif
-
-#ifndef __s390x__
-
-typedef unsigned long   __kernel_ino_t;
-typedef unsigned short  __kernel_mode_t;
-typedef unsigned short  __kernel_nlink_t;
-typedef unsigned short  __kernel_ipc_pid_t;
-typedef unsigned short  __kernel_uid_t;
-typedef unsigned short  __kernel_gid_t;
-typedef int             __kernel_ssize_t;
-typedef int             __kernel_ptrdiff_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-typedef unsigned short	__kernel_old_uid_t;
-typedef unsigned short	__kernel_old_gid_t;
-typedef unsigned short	__kernel_old_dev_t;
-
-#else /* __s390x__ */
-
-typedef unsigned int    __kernel_ino_t;
-typedef unsigned int    __kernel_mode_t;
-typedef unsigned int    __kernel_nlink_t;
-typedef int             __kernel_ipc_pid_t;
-typedef unsigned int    __kernel_uid_t;
-typedef unsigned int    __kernel_gid_t;
-typedef long            __kernel_ssize_t;
-typedef long            __kernel_ptrdiff_t;
-typedef unsigned long   __kernel_sigset_t;      /* at least 32 bits */
-typedef __kernel_uid_t __kernel_old_uid_t;
-typedef __kernel_gid_t __kernel_old_gid_t;
-typedef __kernel_uid_t __kernel_uid32_t;
-typedef __kernel_gid_t __kernel_gid32_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#endif /* __s390x__ */
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-        int     val[2];
-#else                        /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
-        int     __val[2];
-#endif                       /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
-} __kernel_fsid_t;
-
-
-#ifdef __KERNEL__
-
-#undef __FD_SET
-static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static inline int __FD_ISSET(unsigned long fd, const __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	return (fdsetp->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-#undef  __FD_ZERO
-#define __FD_ZERO(fdsetp) \
-	((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set)))
-
-#endif     /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h
deleted file mode 100644
index 4af80af2a88f..000000000000
--- a/include/asm-s390/processor.h
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- *  include/asm-s390/processor.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/processor.h"
- *    Copyright (C) 1994, Linus Torvalds
- */
-
-#ifndef __ASM_S390_PROCESSOR_H
-#define __ASM_S390_PROCESSOR_H
-
-#include <asm/ptrace.h>
-
-#ifdef __KERNEL__
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
-
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-typedef struct
-{
-        unsigned int version :  8;
-        unsigned int ident   : 24;
-        unsigned int machine : 16;
-        unsigned int unused  : 16;
-} __attribute__ ((packed)) cpuid_t;
-
-static inline void get_cpu_id(cpuid_t *ptr)
-{
-	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
-}
-
-struct cpuinfo_S390
-{
-        cpuid_t  cpu_id;
-        __u16    cpu_addr;
-        __u16    cpu_nr;
-        unsigned long loops_per_jiffy;
-        unsigned long *pgd_quick;
-#ifdef __s390x__
-        unsigned long *pmd_quick;
-#endif /* __s390x__ */
-        unsigned long *pte_quick;
-        unsigned long pgtable_cache_sz;
-};
-
-extern void s390_adjust_jiffies(void);
-extern void print_cpu_info(struct cpuinfo_S390 *);
-extern int get_cpu_capability(unsigned int *);
-
-/*
- * User space process size: 2GB for 31 bit, 4TB for 64 bit.
- */
-#ifndef __s390x__
-
-#define TASK_SIZE		(1UL << 31)
-#define TASK_UNMAPPED_BASE	(1UL << 30)
-
-#else /* __s390x__ */
-
-#define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk,TIF_31BIT) ? \
-					(1UL << 31) : (1UL << 53))
-#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_31BIT) ? \
-					(1UL << 30) : (1UL << 41))
-#define TASK_SIZE		TASK_SIZE_OF(current)
-
-#endif /* __s390x__ */
-
-#ifdef __KERNEL__
-
-#ifndef __s390x__
-#define STACK_TOP		(1UL << 31)
-#define STACK_TOP_MAX		(1UL << 31)
-#else /* __s390x__ */
-#define STACK_TOP		(1UL << (test_thread_flag(TIF_31BIT) ? 31:42))
-#define STACK_TOP_MAX		(1UL << 42)
-#endif /* __s390x__ */
-
-
-#endif
-
-#define HAVE_ARCH_PICK_MMAP_LAYOUT
-
-typedef struct {
-        __u32 ar4;
-} mm_segment_t;
-
-/*
- * Thread structure
- */
-struct thread_struct {
-	s390_fp_regs fp_regs;
-	unsigned int  acrs[NUM_ACRS];
-        unsigned long ksp;              /* kernel stack pointer             */
-	mm_segment_t mm_segment;
-        unsigned long prot_addr;        /* address of protection-excep.     */
-        unsigned int trap_no;
-        per_struct per_info;
-	/* Used to give failing instruction back to user for ieee exceptions */
-	unsigned long ieee_instruction_pointer; 
-        /* pfault_wait is used to block the process on a pfault event */
-	unsigned long pfault_wait;
-};
-
-typedef struct thread_struct thread_struct;
-
-/*
- * Stack layout of a C stack frame.
- */
-#ifndef __PACK_STACK
-struct stack_frame {
-	unsigned long back_chain;
-	unsigned long empty1[5];
-	unsigned long gprs[10];
-	unsigned int  empty2[8];
-};
-#else
-struct stack_frame {
-	unsigned long empty1[5];
-	unsigned int  empty2[8];
-	unsigned long gprs[10];
-	unsigned long back_chain;
-};
-#endif
-
-#define ARCH_MIN_TASKALIGN	8
-
-#define INIT_THREAD {							\
-	.ksp = sizeof(init_stack) + (unsigned long) &init_stack,	\
-}
-
-/*
- * Do necessary setup to start up a new thread.
- */
-#define start_thread(regs, new_psw, new_stackp) do {		\
-	set_fs(USER_DS);					\
-	regs->psw.mask	= psw_user_bits;			\
-	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
-	regs->gprs[15]	= new_stackp;				\
-} while (0)
-
-#define start_thread31(regs, new_psw, new_stackp) do {		\
-	set_fs(USER_DS);					\
-	regs->psw.mask	= psw_user32_bits;			\
-	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
-	regs->gprs[15]	= new_stackp;				\
-	crst_table_downgrade(current->mm, 1UL << 31);		\
-} while (0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-struct seq_file;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-/*
- * Return saved PC of a blocked thread.
- */
-extern unsigned long thread_saved_pc(struct task_struct *t);
-
-/*
- * Print register of task into buffer. Used in fs/proc/array.c.
- */
-extern void task_show_regs(struct seq_file *m, struct task_struct *task);
-
-extern void show_code(struct pt_regs *regs);
-
-unsigned long get_wchan(struct task_struct *p);
-#define task_pt_regs(tsk) ((struct pt_regs *) \
-        (task_stack_page(tsk) + THREAD_SIZE) - 1)
-#define KSTK_EIP(tsk)	(task_pt_regs(tsk)->psw.addr)
-#define KSTK_ESP(tsk)	(task_pt_regs(tsk)->gprs[15])
-
-/*
- * Give up the time slice of the virtual PU.
- */
-static inline void cpu_relax(void)
-{
-	if (MACHINE_HAS_DIAG44)
-		asm volatile("diag 0,0,68");
-	barrier();
-}
-
-static inline void psw_set_key(unsigned int key)
-{
-	asm volatile("spka 0(%0)" : : "d" (key));
-}
-
-/*
- * Set PSW to specified value.
- */
-static inline void __load_psw(psw_t psw)
-{
-#ifndef __s390x__
-	asm volatile("lpsw  0(%0)" : : "a" (&psw), "m" (psw) : "cc");
-#else
-	asm volatile("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc");
-#endif
-}
-
-/*
- * Set PSW mask to specified value, while leaving the
- * PSW addr pointing to the next instruction.
- */
-
-static inline void __load_psw_mask (unsigned long mask)
-{
-	unsigned long addr;
-	psw_t psw;
-
-	psw.mask = mask;
-
-#ifndef __s390x__
-	asm volatile(
-		"	basr	%0,0\n"
-		"0:	ahi	%0,1f-0b\n"
-		"	st	%0,4(%1)\n"
-		"	lpsw	0(%1)\n"
-		"1:"
-		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
-#else /* __s390x__ */
-	asm volatile(
-		"	larl	%0,1f\n"
-		"	stg	%0,8(%1)\n"
-		"	lpswe	0(%1)\n"
-		"1:"
-		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
-#endif /* __s390x__ */
-}
- 
-/*
- * Function to stop a processor until an interruption occurred
- */
-static inline void enabled_wait(void)
-{
-	__load_psw_mask(PSW_BASE_BITS | PSW_MASK_IO | PSW_MASK_EXT |
-			PSW_MASK_MCHECK | PSW_MASK_WAIT | PSW_DEFAULT_KEY);
-}
-
-/*
- * Function to drop a processor into disabled wait state
- */
-
-static inline void disabled_wait(unsigned long code)
-{
-        unsigned long ctl_buf;
-        psw_t dw_psw;
-
-        dw_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT;
-        dw_psw.addr = code;
-        /* 
-         * Store status and then load disabled wait psw,
-         * the processor is dead afterwards
-         */
-#ifndef __s390x__
-	asm volatile(
-		"	stctl	0,0,0(%2)\n"
-		"	ni	0(%2),0xef\n"	/* switch off protection */
-		"	lctl	0,0,0(%2)\n"
-		"	stpt	0xd8\n"		/* store timer */
-		"	stckc	0xe0\n"		/* store clock comparator */
-		"	stpx	0x108\n"	/* store prefix register */
-		"	stam	0,15,0x120\n"	/* store access registers */
-		"	std	0,0x160\n"	/* store f0 */
-		"	std	2,0x168\n"	/* store f2 */
-		"	std	4,0x170\n"	/* store f4 */
-		"	std	6,0x178\n"	/* store f6 */
-		"	stm	0,15,0x180\n"	/* store general registers */
-		"	stctl	0,15,0x1c0\n"	/* store control registers */
-		"	oi	0x1c0,0x10\n"	/* fake protection bit */
-		"	lpsw	0(%1)"
-		: "=m" (ctl_buf)
-		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc");
-#else /* __s390x__ */
-	asm volatile(
-		"	stctg	0,0,0(%2)\n"
-		"	ni	4(%2),0xef\n"	/* switch off protection */
-		"	lctlg	0,0,0(%2)\n"
-		"	lghi	1,0x1000\n"
-		"	stpt	0x328(1)\n"	/* store timer */
-		"	stckc	0x330(1)\n"	/* store clock comparator */
-		"	stpx	0x318(1)\n"	/* store prefix register */
-		"	stam	0,15,0x340(1)\n"/* store access registers */
-		"	stfpc	0x31c(1)\n"	/* store fpu control */
-		"	std	0,0x200(1)\n"	/* store f0 */
-		"	std	1,0x208(1)\n"	/* store f1 */
-		"	std	2,0x210(1)\n"	/* store f2 */
-		"	std	3,0x218(1)\n"	/* store f3 */
-		"	std	4,0x220(1)\n"	/* store f4 */
-		"	std	5,0x228(1)\n"	/* store f5 */
-		"	std	6,0x230(1)\n"	/* store f6 */
-		"	std	7,0x238(1)\n"	/* store f7 */
-		"	std	8,0x240(1)\n"	/* store f8 */
-		"	std	9,0x248(1)\n"	/* store f9 */
-		"	std	10,0x250(1)\n"	/* store f10 */
-		"	std	11,0x258(1)\n"	/* store f11 */
-		"	std	12,0x260(1)\n"	/* store f12 */
-		"	std	13,0x268(1)\n"	/* store f13 */
-		"	std	14,0x270(1)\n"	/* store f14 */
-		"	std	15,0x278(1)\n"	/* store f15 */
-		"	stmg	0,15,0x280(1)\n"/* store general registers */
-		"	stctg	0,15,0x380(1)\n"/* store control registers */
-		"	oi	0x384(1),0x10\n"/* fake protection bit */
-		"	lpswe	0(%1)"
-		: "=m" (ctl_buf)
-		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0");
-#endif /* __s390x__ */
-}
-
-/*
- * Basic Machine Check/Program Check Handler.
- */
-
-extern void s390_base_mcck_handler(void);
-extern void s390_base_pgm_handler(void);
-extern void s390_base_ext_handler(void);
-
-extern void (*s390_base_mcck_handler_fn)(void);
-extern void (*s390_base_pgm_handler_fn)(void);
-extern void (*s390_base_ext_handler_fn)(void);
-
-#define ARCH_LOW_ADDRESS_LIMIT	0x7fffffffUL
-
-#endif
-
-/*
- * Helper macro for exception table entries
- */
-#ifndef __s390x__
-#define EX_TABLE(_fault,_target)			\
-	".section __ex_table,\"a\"\n"			\
-	"	.align 4\n"				\
-	"	.long  " #_fault "," #_target "\n"	\
-	".previous\n"
-#else
-#define EX_TABLE(_fault,_target)			\
-	".section __ex_table,\"a\"\n"			\
-	"	.align 8\n"				\
-	"	.quad  " #_fault "," #_target "\n"	\
-	".previous\n"
-#endif
-
-#endif                                 /* __ASM_S390_PROCESSOR_H           */
diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h
deleted file mode 100644
index af2c9ac28a07..000000000000
--- a/include/asm-s390/ptrace.h
+++ /dev/null
@@ -1,499 +0,0 @@
-/*
- *  include/asm-s390/ptrace.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- */
-
-#ifndef _S390_PTRACE_H
-#define _S390_PTRACE_H
-
-/*
- * Offsets in the user_regs_struct. They are used for the ptrace
- * system call and in entry.S
- */
-#ifndef __s390x__
-
-#define PT_PSWMASK  0x00
-#define PT_PSWADDR  0x04
-#define PT_GPR0     0x08
-#define PT_GPR1     0x0C
-#define PT_GPR2     0x10
-#define PT_GPR3     0x14
-#define PT_GPR4     0x18
-#define PT_GPR5     0x1C
-#define PT_GPR6     0x20
-#define PT_GPR7     0x24
-#define PT_GPR8     0x28
-#define PT_GPR9     0x2C
-#define PT_GPR10    0x30
-#define PT_GPR11    0x34
-#define PT_GPR12    0x38
-#define PT_GPR13    0x3C
-#define PT_GPR14    0x40
-#define PT_GPR15    0x44
-#define PT_ACR0     0x48
-#define PT_ACR1     0x4C
-#define PT_ACR2     0x50
-#define PT_ACR3     0x54
-#define PT_ACR4	    0x58
-#define PT_ACR5	    0x5C
-#define PT_ACR6	    0x60
-#define PT_ACR7	    0x64
-#define PT_ACR8	    0x68
-#define PT_ACR9	    0x6C
-#define PT_ACR10    0x70
-#define PT_ACR11    0x74
-#define PT_ACR12    0x78
-#define PT_ACR13    0x7C
-#define PT_ACR14    0x80
-#define PT_ACR15    0x84
-#define PT_ORIGGPR2 0x88
-#define PT_FPC	    0x90
-/*
- * A nasty fact of life that the ptrace api
- * only supports passing of longs.
- */
-#define PT_FPR0_HI  0x98
-#define PT_FPR0_LO  0x9C
-#define PT_FPR1_HI  0xA0
-#define PT_FPR1_LO  0xA4
-#define PT_FPR2_HI  0xA8
-#define PT_FPR2_LO  0xAC
-#define PT_FPR3_HI  0xB0
-#define PT_FPR3_LO  0xB4
-#define PT_FPR4_HI  0xB8
-#define PT_FPR4_LO  0xBC
-#define PT_FPR5_HI  0xC0
-#define PT_FPR5_LO  0xC4
-#define PT_FPR6_HI  0xC8
-#define PT_FPR6_LO  0xCC
-#define PT_FPR7_HI  0xD0
-#define PT_FPR7_LO  0xD4
-#define PT_FPR8_HI  0xD8
-#define PT_FPR8_LO  0XDC
-#define PT_FPR9_HI  0xE0
-#define PT_FPR9_LO  0xE4
-#define PT_FPR10_HI 0xE8
-#define PT_FPR10_LO 0xEC
-#define PT_FPR11_HI 0xF0
-#define PT_FPR11_LO 0xF4
-#define PT_FPR12_HI 0xF8
-#define PT_FPR12_LO 0xFC
-#define PT_FPR13_HI 0x100
-#define PT_FPR13_LO 0x104
-#define PT_FPR14_HI 0x108
-#define PT_FPR14_LO 0x10C
-#define PT_FPR15_HI 0x110
-#define PT_FPR15_LO 0x114
-#define PT_CR_9	    0x118
-#define PT_CR_10    0x11C
-#define PT_CR_11    0x120
-#define PT_IEEE_IP  0x13C
-#define PT_LASTOFF  PT_IEEE_IP
-#define PT_ENDREGS  0x140-1
-
-#define GPR_SIZE	4
-#define CR_SIZE		4
-
-#define STACK_FRAME_OVERHEAD	96	/* size of minimum stack frame */
-
-#else /* __s390x__ */
-
-#define PT_PSWMASK  0x00
-#define PT_PSWADDR  0x08
-#define PT_GPR0     0x10
-#define PT_GPR1     0x18
-#define PT_GPR2     0x20
-#define PT_GPR3     0x28
-#define PT_GPR4     0x30
-#define PT_GPR5     0x38
-#define PT_GPR6     0x40
-#define PT_GPR7     0x48
-#define PT_GPR8     0x50
-#define PT_GPR9     0x58
-#define PT_GPR10    0x60
-#define PT_GPR11    0x68
-#define PT_GPR12    0x70
-#define PT_GPR13    0x78
-#define PT_GPR14    0x80
-#define PT_GPR15    0x88
-#define PT_ACR0     0x90
-#define PT_ACR1     0x94
-#define PT_ACR2     0x98
-#define PT_ACR3     0x9C
-#define PT_ACR4	    0xA0
-#define PT_ACR5	    0xA4
-#define PT_ACR6	    0xA8
-#define PT_ACR7	    0xAC
-#define PT_ACR8	    0xB0
-#define PT_ACR9	    0xB4
-#define PT_ACR10    0xB8
-#define PT_ACR11    0xBC
-#define PT_ACR12    0xC0
-#define PT_ACR13    0xC4
-#define PT_ACR14    0xC8
-#define PT_ACR15    0xCC
-#define PT_ORIGGPR2 0xD0
-#define PT_FPC	    0xD8
-#define PT_FPR0     0xE0
-#define PT_FPR1     0xE8
-#define PT_FPR2     0xF0
-#define PT_FPR3     0xF8
-#define PT_FPR4     0x100
-#define PT_FPR5     0x108
-#define PT_FPR6     0x110
-#define PT_FPR7     0x118
-#define PT_FPR8     0x120
-#define PT_FPR9     0x128
-#define PT_FPR10    0x130
-#define PT_FPR11    0x138
-#define PT_FPR12    0x140
-#define PT_FPR13    0x148
-#define PT_FPR14    0x150
-#define PT_FPR15    0x158
-#define PT_CR_9     0x160
-#define PT_CR_10    0x168
-#define PT_CR_11    0x170
-#define PT_IEEE_IP  0x1A8
-#define PT_LASTOFF  PT_IEEE_IP
-#define PT_ENDREGS  0x1B0-1
-
-#define GPR_SIZE	8
-#define CR_SIZE		8
-
-#define STACK_FRAME_OVERHEAD    160      /* size of minimum stack frame */
-
-#endif /* __s390x__ */
-
-#define NUM_GPRS	16
-#define NUM_FPRS	16
-#define NUM_CRS		16
-#define NUM_ACRS	16
-
-#define FPR_SIZE	8
-#define FPC_SIZE	4
-#define FPC_PAD_SIZE	4 /* gcc insists on aligning the fpregs */
-#define ACR_SIZE	4
-
-
-#define PTRACE_OLDSETOPTIONS         21
-
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <linux/types.h>
-
-typedef union
-{
-	float   f;
-	double  d;
-        __u64   ui;
-	struct
-	{
-		__u32 hi;
-		__u32 lo;
-	} fp;
-} freg_t;
-
-typedef struct
-{
-	__u32   fpc;
-	freg_t  fprs[NUM_FPRS];              
-} s390_fp_regs;
-
-#define FPC_EXCEPTION_MASK      0xF8000000
-#define FPC_FLAGS_MASK          0x00F80000
-#define FPC_DXC_MASK            0x0000FF00
-#define FPC_RM_MASK             0x00000003
-#define FPC_VALID_MASK          0xF8F8FF03
-
-/* this typedef defines how a Program Status Word looks like */
-typedef struct 
-{
-        unsigned long mask;
-        unsigned long addr;
-} __attribute__ ((aligned(8))) psw_t;
-
-typedef struct
-{
-	__u32	mask;
-	__u32	addr;
-} __attribute__ ((aligned(8))) psw_compat_t;
-
-#ifndef __s390x__
-
-#define PSW_MASK_PER		0x40000000UL
-#define PSW_MASK_DAT		0x04000000UL
-#define PSW_MASK_IO		0x02000000UL
-#define PSW_MASK_EXT		0x01000000UL
-#define PSW_MASK_KEY		0x00F00000UL
-#define PSW_MASK_MCHECK		0x00040000UL
-#define PSW_MASK_WAIT		0x00020000UL
-#define PSW_MASK_PSTATE		0x00010000UL
-#define PSW_MASK_ASC		0x0000C000UL
-#define PSW_MASK_CC		0x00003000UL
-#define PSW_MASK_PM		0x00000F00UL
-
-#define PSW_ADDR_AMODE		0x80000000UL
-#define PSW_ADDR_INSN		0x7FFFFFFFUL
-
-#define PSW_BASE_BITS		0x00080000UL
-#define PSW_DEFAULT_KEY		(((unsigned long) PAGE_DEFAULT_ACC) << 20)
-
-#define PSW_ASC_PRIMARY		0x00000000UL
-#define PSW_ASC_ACCREG		0x00004000UL
-#define PSW_ASC_SECONDARY	0x00008000UL
-#define PSW_ASC_HOME		0x0000C000UL
-
-#else /* __s390x__ */
-
-#define PSW_MASK_PER		0x4000000000000000UL
-#define PSW_MASK_DAT		0x0400000000000000UL
-#define PSW_MASK_IO		0x0200000000000000UL
-#define PSW_MASK_EXT		0x0100000000000000UL
-#define PSW_MASK_KEY		0x00F0000000000000UL
-#define PSW_MASK_MCHECK		0x0004000000000000UL
-#define PSW_MASK_WAIT		0x0002000000000000UL
-#define PSW_MASK_PSTATE		0x0001000000000000UL
-#define PSW_MASK_ASC		0x0000C00000000000UL
-#define PSW_MASK_CC		0x0000300000000000UL
-#define PSW_MASK_PM		0x00000F0000000000UL
-
-#define PSW_ADDR_AMODE		0x0000000000000000UL
-#define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
-
-#define PSW_BASE_BITS		0x0000000180000000UL
-#define PSW_BASE32_BITS		0x0000000080000000UL
-#define PSW_DEFAULT_KEY		(((unsigned long) PAGE_DEFAULT_ACC) << 52)
-
-#define PSW_ASC_PRIMARY		0x0000000000000000UL
-#define PSW_ASC_ACCREG		0x0000400000000000UL
-#define PSW_ASC_SECONDARY	0x0000800000000000UL
-#define PSW_ASC_HOME		0x0000C00000000000UL
-
-extern long psw_user32_bits;
-
-#endif /* __s390x__ */
-
-extern long psw_kernel_bits;
-extern long psw_user_bits;
-
-/* This macro merges a NEW PSW mask specified by the user into
-   the currently active PSW mask CURRENT, modifying only those
-   bits in CURRENT that the user may be allowed to change: this
-   is the condition code and the program mask bits.  */
-#define PSW_MASK_MERGE(CURRENT,NEW) \
-	(((CURRENT) & ~(PSW_MASK_CC|PSW_MASK_PM)) | \
-	 ((NEW) & (PSW_MASK_CC|PSW_MASK_PM)))
-
-/*
- * The s390_regs structure is used to define the elf_gregset_t.
- */
-typedef struct
-{
-	psw_t psw;
-	unsigned long gprs[NUM_GPRS];
-	unsigned int  acrs[NUM_ACRS];
-	unsigned long orig_gpr2;
-} s390_regs;
-
-typedef struct
-{
-	psw_compat_t	psw;
-	__u32		gprs[NUM_GPRS];
-	__u32		acrs[NUM_ACRS];
-	__u32		orig_gpr2;
-} s390_compat_regs;
-
-
-#ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * The pt_regs struct defines the way the registers are stored on
- * the stack during a system call.
- */
-struct pt_regs 
-{
-	unsigned long args[1];
-	psw_t psw;
-	unsigned long gprs[NUM_GPRS];
-	unsigned long orig_gpr2;
-	unsigned short ilc;
-	unsigned short trap;
-};
-#endif
-
-/*
- * Now for the program event recording (trace) definitions.
- */
-typedef struct
-{
-	unsigned long cr[3];
-} per_cr_words;
-
-#define PER_EM_MASK 0xE8000000UL
-
-typedef	struct
-{
-#ifdef __s390x__
-	unsigned                       : 32;
-#endif /* __s390x__ */
-	unsigned em_branching          : 1;
-	unsigned em_instruction_fetch  : 1;
-	/*
-	 * Switching on storage alteration automatically fixes
-	 * the storage alteration event bit in the users std.
-	 */
-	unsigned em_storage_alteration : 1;
-	unsigned em_gpr_alt_unused     : 1;
-	unsigned em_store_real_address : 1;
-	unsigned                       : 3;
-	unsigned branch_addr_ctl       : 1;
-	unsigned                       : 1;
-	unsigned storage_alt_space_ctl : 1;
-	unsigned                       : 21;
-	unsigned long starting_addr;
-	unsigned long ending_addr;
-} per_cr_bits;
-
-typedef struct
-{
-	unsigned short perc_atmid;
-	unsigned long address;
-	unsigned char access_id;
-} per_lowcore_words;
-
-typedef struct
-{
-	unsigned perc_branching          : 1;
-	unsigned perc_instruction_fetch  : 1;
-	unsigned perc_storage_alteration : 1;
-	unsigned perc_gpr_alt_unused     : 1;
-	unsigned perc_store_real_address : 1;
-	unsigned                         : 3;
-	unsigned atmid_psw_bit_31        : 1;
-	unsigned atmid_validity_bit      : 1;
-	unsigned atmid_psw_bit_32        : 1;
-	unsigned atmid_psw_bit_5         : 1;
-	unsigned atmid_psw_bit_16        : 1;
-	unsigned atmid_psw_bit_17        : 1;
-	unsigned si                      : 2;
-	unsigned long address;
-	unsigned                         : 4;
-	unsigned access_id               : 4;
-} per_lowcore_bits;
-
-typedef struct
-{
-	union {
-		per_cr_words   words;
-		per_cr_bits    bits;
-	} control_regs;
-	/*
-	 * Use these flags instead of setting em_instruction_fetch
-	 * directly they are used so that single stepping can be
-	 * switched on & off while not affecting other tracing
-	 */
-	unsigned  single_step       : 1;
-	unsigned  instruction_fetch : 1;
-	unsigned                    : 30;
-	/*
-	 * These addresses are copied into cr10 & cr11 if single
-	 * stepping is switched off
-	 */
-	unsigned long starting_addr;
-	unsigned long ending_addr;
-	union {
-		per_lowcore_words words;
-		per_lowcore_bits  bits;
-	} lowcore; 
-} per_struct;
-
-typedef struct
-{
-	unsigned int  len;
-	unsigned long kernel_addr;
-	unsigned long process_addr;
-} ptrace_area;
-
-/*
- * S/390 specific non posix ptrace requests. I chose unusual values so
- * they are unlikely to clash with future ptrace definitions.
- */
-#define PTRACE_PEEKUSR_AREA           0x5000
-#define PTRACE_POKEUSR_AREA           0x5001
-#define PTRACE_PEEKTEXT_AREA	      0x5002
-#define PTRACE_PEEKDATA_AREA	      0x5003
-#define PTRACE_POKETEXT_AREA	      0x5004
-#define PTRACE_POKEDATA_AREA 	      0x5005
-
-/*
- * PT_PROT definition is loosely based on hppa bsd definition in
- * gdb/hppab-nat.c
- */
-#define PTRACE_PROT                       21
-
-typedef enum
-{
-	ptprot_set_access_watchpoint,
-	ptprot_set_write_watchpoint,
-	ptprot_disable_watchpoint
-} ptprot_flags;
-
-typedef struct
-{
-	unsigned long lowaddr;
-	unsigned long hiaddr;
-	ptprot_flags prot;
-} ptprot_area;                     
-
-/* Sequence of bytes for breakpoint illegal instruction.  */
-#define S390_BREAKPOINT     {0x0,0x1}
-#define S390_BREAKPOINT_U16 ((__u16)0x0001)
-#define S390_SYSCALL_OPCODE ((__u16)0x0a00)
-#define S390_SYSCALL_SIZE   2
-
-/*
- * The user_regs_struct defines the way the user registers are
- * store on the stack for signal handling.
- */
-struct user_regs_struct
-{
-	psw_t psw;
-	unsigned long gprs[NUM_GPRS];
-	unsigned int  acrs[NUM_ACRS];
-	unsigned long orig_gpr2;
-	s390_fp_regs fp_regs;
-	/*
-	 * These per registers are in here so that gdb can modify them
-	 * itself as there is no "official" ptrace interface for hardware
-	 * watchpoints. This is the way intel does it.
-	 */
-	per_struct per_info;
-	unsigned long ieee_instruction_pointer; 
-	/* Used to give failing instruction back to user for ieee exceptions */
-};
-
-#ifdef __KERNEL__
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
-#define arch_has_single_step()	(1)
-struct task_struct;
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
-#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
-#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
-#define regs_return_value(regs)((regs)->gprs[2])
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs * regs);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-
-#endif /* _S390_PTRACE_H */
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
deleted file mode 100644
index 6813772171f2..000000000000
--- a/include/asm-s390/qdio.h
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * linux/include/asm-s390/qdio.h
- *
- * Copyright 2000,2008 IBM Corp.
- * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
- *	      Jan Glauber <jang@linux.vnet.ibm.com>
- *
- */
-#ifndef __QDIO_H__
-#define __QDIO_H__
-
-#include <linux/interrupt.h>
-#include <asm/cio.h>
-#include <asm/ccwdev.h>
-
-#define QDIO_MAX_QUEUES_PER_IRQ		32
-#define QDIO_MAX_BUFFERS_PER_Q		128
-#define QDIO_MAX_BUFFERS_MASK		(QDIO_MAX_BUFFERS_PER_Q - 1)
-#define QDIO_MAX_ELEMENTS_PER_BUFFER	16
-#define QDIO_SBAL_SIZE			256
-
-#define QDIO_QETH_QFMT			0
-#define QDIO_ZFCP_QFMT			1
-#define QDIO_IQDIO_QFMT			2
-
-/**
- * struct qdesfmt0 - queue descriptor, format 0
- * @sliba: storage list information block address
- * @sla: storage list address
- * @slsba: storage list state block address
- * @akey: access key for DLIB
- * @bkey: access key for SL
- * @ckey: access key for SBALs
- * @dkey: access key for SLSB
- */
-struct qdesfmt0 {
-	u64 sliba;
-	u64 sla;
-	u64 slsba;
-	u32	 : 32;
-	u32 akey : 4;
-	u32 bkey : 4;
-	u32 ckey : 4;
-	u32 dkey : 4;
-	u32	 : 16;
-} __attribute__ ((packed));
-
-/**
- * struct qdr - queue description record (QDR)
- * @qfmt: queue format
- * @pfmt: implementation dependent parameter format
- * @ac: adapter characteristics
- * @iqdcnt: input queue descriptor count
- * @oqdcnt: output queue descriptor count
- * @iqdsz: inpout queue descriptor size
- * @oqdsz: output queue descriptor size
- * @qiba: queue information block address
- * @qkey: queue information block key
- * @qdf0: queue descriptions
- */
-struct qdr {
-	u32 qfmt   : 8;
-	u32 pfmt   : 8;
-	u32	   : 8;
-	u32 ac	   : 8;
-	u32	   : 8;
-	u32 iqdcnt : 8;
-	u32	   : 8;
-	u32 oqdcnt : 8;
-	u32	   : 8;
-	u32 iqdsz  : 8;
-	u32	   : 8;
-	u32 oqdsz  : 8;
-	/* private: */
-	u32 res[9];
-	/* public: */
-	u64 qiba;
-	u32	   : 32;
-	u32 qkey   : 4;
-	u32	   : 28;
-	struct qdesfmt0 qdf0[126];
-} __attribute__ ((packed, aligned(4096)));
-
-#define QIB_AC_OUTBOUND_PCI_SUPPORTED	0x40
-#define QIB_RFLAGS_ENABLE_QEBSM		0x80
-
-/**
- * struct qib - queue information block (QIB)
- * @qfmt: queue format
- * @pfmt: implementation dependent parameter format
- * @rflags: QEBSM
- * @ac: adapter characteristics
- * @isliba: absolute address of first input SLIB
- * @osliba: absolute address of first output SLIB
- * @ebcnam: adapter identifier in EBCDIC
- * @parm: implementation dependent parameters
- */
-struct qib {
-	u32 qfmt   : 8;
-	u32 pfmt   : 8;
-	u32 rflags : 8;
-	u32 ac	   : 8;
-	u32	   : 32;
-	u64 isliba;
-	u64 osliba;
-	u32	   : 32;
-	u32	   : 32;
-	u8 ebcnam[8];
-	/* private: */
-	u8 res[88];
-	/* public: */
-	u8 parm[QDIO_MAX_BUFFERS_PER_Q];
-} __attribute__ ((packed, aligned(256)));
-
-/**
- * struct slibe - storage list information block element (SLIBE)
- * @parms: implementation dependent parameters
- */
-struct slibe {
-	u64 parms;
-};
-
-/**
- * struct slib - storage list information block (SLIB)
- * @nsliba: next SLIB address (if any)
- * @sla: SL address
- * @slsba: SLSB address
- * @slibe: SLIB elements
- */
-struct slib {
-	u64 nsliba;
-	u64 sla;
-	u64 slsba;
-	/* private: */
-	u8 res[1000];
-	/* public: */
-	struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];
-} __attribute__ ((packed, aligned(2048)));
-
-/**
- * struct sbal_flags - storage block address list flags
- * @last: last entry
- * @cont: contiguous storage
- * @frag: fragmentation
- */
-struct sbal_flags {
-	u8	: 1;
-	u8 last : 1;
-	u8 cont : 1;
-	u8	: 1;
-	u8 frag : 2;
-	u8	: 2;
-} __attribute__ ((packed));
-
-#define SBAL_FLAGS_FIRST_FRAG		0x04000000UL
-#define SBAL_FLAGS_MIDDLE_FRAG		0x08000000UL
-#define SBAL_FLAGS_LAST_FRAG		0x0c000000UL
-#define SBAL_FLAGS_LAST_ENTRY		0x40000000UL
-#define SBAL_FLAGS_CONTIGUOUS		0x20000000UL
-
-#define SBAL_FLAGS0_DATA_CONTINUATION	0x20UL
-
-/* Awesome OpenFCP extensions */
-#define SBAL_FLAGS0_TYPE_STATUS		0x00UL
-#define SBAL_FLAGS0_TYPE_WRITE		0x08UL
-#define SBAL_FLAGS0_TYPE_READ		0x10UL
-#define SBAL_FLAGS0_TYPE_WRITE_READ	0x18UL
-#define SBAL_FLAGS0_MORE_SBALS		0x04UL
-#define SBAL_FLAGS0_COMMAND		0x02UL
-#define SBAL_FLAGS0_LAST_SBAL		0x00UL
-#define SBAL_FLAGS0_ONLY_SBAL		SBAL_FLAGS0_COMMAND
-#define SBAL_FLAGS0_MIDDLE_SBAL		SBAL_FLAGS0_MORE_SBALS
-#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
-#define SBAL_FLAGS0_PCI			0x40
-
-/**
- * struct sbal_sbalf_0 - sbal flags for sbale 0
- * @pci: PCI indicator
- * @cont: data continuation
- * @sbtype: storage-block type (FCP)
- */
-struct sbal_sbalf_0 {
-	u8	  : 1;
-	u8 pci	  : 1;
-	u8 cont   : 1;
-	u8 sbtype : 2;
-	u8	  : 3;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_1 - sbal flags for sbale 1
- * @key: storage key
- */
-struct sbal_sbalf_1 {
-	u8     : 4;
-	u8 key : 4;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_14 - sbal flags for sbale 14
- * @erridx: error index
- */
-struct sbal_sbalf_14 {
-	u8	  : 4;
-	u8 erridx : 4;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_15 - sbal flags for sbale 15
- * @reason: reason for error state
- */
-struct sbal_sbalf_15 {
-	u8 reason;
-} __attribute__ ((packed));
-
-/**
- * union sbal_sbalf - storage block address list flags
- * @i0: sbalf0
- * @i1: sbalf1
- * @i14: sbalf14
- * @i15: sblaf15
- * @value: raw value
- */
-union sbal_sbalf {
-	struct sbal_sbalf_0  i0;
-	struct sbal_sbalf_1  i1;
-	struct sbal_sbalf_14 i14;
-	struct sbal_sbalf_15 i15;
-	u8 value;
-};
-
-/**
- * struct qdio_buffer_element - SBAL entry
- * @flags: flags
- * @length: length
- * @addr: address
-*/
-struct qdio_buffer_element {
-	u32 flags;
-	u32 length;
-#ifdef CONFIG_32BIT
-	/* private: */
-	void *reserved;
-	/* public: */
-#endif
-	void *addr;
-} __attribute__ ((packed, aligned(16)));
-
-/**
- * struct qdio_buffer - storage block address list (SBAL)
- * @element: SBAL entries
- */
-struct qdio_buffer {
-	struct qdio_buffer_element element[QDIO_MAX_ELEMENTS_PER_BUFFER];
-} __attribute__ ((packed, aligned(256)));
-
-/**
- * struct sl_element - storage list entry
- * @sbal: absolute SBAL address
- */
-struct sl_element {
-#ifdef CONFIG_32BIT
-	/* private: */
-	unsigned long reserved;
-	/* public: */
-#endif
-	unsigned long sbal;
-} __attribute__ ((packed));
-
-/**
- * struct sl - storage list (SL)
- * @element: SL entries
- */
-struct sl {
-	struct sl_element element[QDIO_MAX_BUFFERS_PER_Q];
-} __attribute__ ((packed, aligned(1024)));
-
-/**
- * struct slsb - storage list state block (SLSB)
- * @val: state per buffer
- */
-struct slsb {
-	u8 val[QDIO_MAX_BUFFERS_PER_Q];
-} __attribute__ ((packed, aligned(256)));
-
-struct qdio_ssqd_desc {
-	u8 flags;
-	u8:8;
-	u16 sch;
-	u8 qfmt;
-	u8 parm;
-	u8 qdioac1;
-	u8 sch_class;
-	u8 pcnt;
-	u8 icnt;
-	u8:8;
-	u8 ocnt;
-	u8:8;
-	u8 mbccnt;
-	u16 qdioac2;
-	u64 sch_token;
-	u64:64;
-} __attribute__ ((packed));
-
-/* params are: ccw_device, qdio_error, queue_number,
-   first element processed, number of elements processed, int_parm */
-typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
-			    int, int, unsigned long);
-
-/* qdio errors reported to the upper-layer program */
-#define QDIO_ERROR_SIGA_ACCESS_EXCEPTION	0x10
-#define QDIO_ERROR_SIGA_BUSY			0x20
-#define QDIO_ERROR_ACTIVATE_CHECK_CONDITION	0x40
-#define QDIO_ERROR_SLSB_STATE			0x80
-
-/* for qdio_initialize */
-#define QDIO_INBOUND_0COPY_SBALS		0x01
-#define QDIO_OUTBOUND_0COPY_SBALS		0x02
-#define QDIO_USE_OUTBOUND_PCIS			0x04
-
-/* for qdio_cleanup */
-#define QDIO_FLAG_CLEANUP_USING_CLEAR		0x01
-#define QDIO_FLAG_CLEANUP_USING_HALT		0x02
-
-/**
- * struct qdio_initialize - qdio initalization data
- * @cdev: associated ccw device
- * @q_format: queue format
- * @adapter_name: name for the adapter
- * @qib_param_field_format: format for qib_parm_field
- * @qib_param_field: pointer to 128 bytes or NULL, if no param field
- * @input_slib_elements: pointer to no_input_qs * 128 words of data or NULL
- * @output_slib_elements: pointer to no_output_qs * 128 words of data or NULL
- * @no_input_qs: number of input queues
- * @no_output_qs: number of output queues
- * @input_handler: handler to be called for input queues
- * @output_handler: handler to be called for output queues
- * @int_parm: interruption parameter
- * @flags: initialization flags
- * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
- * @output_sbal_addr_array: address of no_output_qs * 128 pointers
- */
-struct qdio_initialize {
-	struct ccw_device *cdev;
-	unsigned char q_format;
-	unsigned char adapter_name[8];
-	unsigned int qib_param_field_format;
-	unsigned char *qib_param_field;
-	unsigned long *input_slib_elements;
-	unsigned long *output_slib_elements;
-	unsigned int no_input_qs;
-	unsigned int no_output_qs;
-	qdio_handler_t *input_handler;
-	qdio_handler_t *output_handler;
-	unsigned long int_parm;
-	unsigned long flags;
-	void **input_sbal_addr_array;
-	void **output_sbal_addr_array;
-};
-
-#define QDIO_STATE_INACTIVE		0x00000002 /* after qdio_cleanup */
-#define QDIO_STATE_ESTABLISHED		0x00000004 /* after qdio_establish */
-#define QDIO_STATE_ACTIVE		0x00000008 /* after qdio_activate */
-#define QDIO_STATE_STOPPED		0x00000010 /* after queues went down */
-
-#define QDIO_FLAG_SYNC_INPUT		0x01
-#define QDIO_FLAG_SYNC_OUTPUT		0x02
-#define QDIO_FLAG_PCI_OUT		0x10
-
-extern int qdio_initialize(struct qdio_initialize *init_data);
-extern int qdio_allocate(struct qdio_initialize *init_data);
-extern int qdio_establish(struct qdio_initialize *init_data);
-extern int qdio_activate(struct ccw_device *);
-
-extern int do_QDIO(struct ccw_device*, unsigned int flags,
-		   int q_nr, int qidx, int count);
-extern int qdio_cleanup(struct ccw_device*, int how);
-extern int qdio_shutdown(struct ccw_device*, int how);
-extern int qdio_free(struct ccw_device *);
-extern struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev);
-
-#endif /* __QDIO_H__ */
diff --git a/include/asm-s390/qeth.h b/include/asm-s390/qeth.h
deleted file mode 100644
index 930d378ef75a..000000000000
--- a/include/asm-s390/qeth.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-s390/qeth.h
- *
- * ioctl definitions for qeth driver
- *
- * Copyright (C) 2004 IBM Corporation
- *
- * Author(s):	Thomas Spatzier <tspat@de.ibm.com>
- *
- */
-#ifndef __ASM_S390_QETH_IOCTL_H__
-#define __ASM_S390_QETH_IOCTL_H__
-#include <linux/ioctl.h>
-
-#define SIOC_QETH_ARP_SET_NO_ENTRIES    (SIOCDEVPRIVATE)
-#define SIOC_QETH_ARP_QUERY_INFO        (SIOCDEVPRIVATE + 1)
-#define SIOC_QETH_ARP_ADD_ENTRY         (SIOCDEVPRIVATE + 2)
-#define SIOC_QETH_ARP_REMOVE_ENTRY      (SIOCDEVPRIVATE + 3)
-#define SIOC_QETH_ARP_FLUSH_CACHE       (SIOCDEVPRIVATE + 4)
-#define SIOC_QETH_ADP_SET_SNMP_CONTROL  (SIOCDEVPRIVATE + 5)
-#define SIOC_QETH_GET_CARD_TYPE         (SIOCDEVPRIVATE + 6)
-
-struct qeth_arp_cache_entry {
-	__u8  macaddr[6];
-	__u8  reserved1[2];
-	__u8  ipaddr[16]; /* for both  IPv4 and IPv6 */
-	__u8  reserved2[32];
-} __attribute__ ((packed));
-
-struct qeth_arp_qi_entry7 {
-	__u8 media_specific[32];
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
-	__u8 macaddr[6];
-	__u8 ipaddr[4];
-} __attribute__((packed));
-
-struct qeth_arp_qi_entry7_short {
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
-	__u8 macaddr[6];
-	__u8 ipaddr[4];
-} __attribute__((packed));
-
-struct qeth_arp_qi_entry5 {
-	__u8 media_specific[32];
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
-	__u8 ipaddr[4];
-} __attribute__((packed));
-
-struct qeth_arp_qi_entry5_short {
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
-	__u8 ipaddr[4];
-} __attribute__((packed));
-
-/*
- * can be set by user if no "media specific information" is wanted
- * -> saves a lot of space in user space buffer
- */
-#define QETH_QARP_STRIP_ENTRIES  0x8000
-#define QETH_QARP_REQUEST_MASK   0x00ff
-
-/* data sent to user space as result of query arp ioctl */
-#define QETH_QARP_USER_DATA_SIZE 20000
-#define QETH_QARP_MASK_OFFSET    4
-#define QETH_QARP_ENTRIES_OFFSET 6
-struct qeth_arp_query_user_data {
-	union {
-		__u32 data_len;		/* set by user space program */
-		__u32 no_entries;	/* set by kernel */
-	} u;
-	__u16 mask_bits;
-	char *entries;
-} __attribute__((packed));
-
-#endif /* __ASM_S390_QETH_IOCTL_H__ */
diff --git a/include/asm-s390/reset.h b/include/asm-s390/reset.h
deleted file mode 100644
index f584f4a52581..000000000000
--- a/include/asm-s390/reset.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  include/asm-s390/reset.h
- *
- *    Copyright IBM Corp. 2006
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- */
-
-#ifndef _ASM_S390_RESET_H
-#define _ASM_S390_RESET_H
-
-#include <linux/list.h>
-
-struct reset_call {
-	struct list_head list;
-	void (*fn)(void);
-};
-
-extern void register_reset_call(struct reset_call *reset);
-extern void unregister_reset_call(struct reset_call *reset);
-extern void s390_reset_system(void);
-#endif /* _ASM_S390_RESET_H */
diff --git a/include/asm-s390/resource.h b/include/asm-s390/resource.h
deleted file mode 100644
index 366c01de04f2..000000000000
--- a/include/asm-s390/resource.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  include/asm-s390/resource.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/resources.h"
- */
-
-#ifndef _S390_RESOURCE_H
-#define _S390_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif
-
diff --git a/include/asm-s390/rwsem.h b/include/asm-s390/rwsem.h
deleted file mode 100644
index 9d2a17971805..000000000000
--- a/include/asm-s390/rwsem.h
+++ /dev/null
@@ -1,387 +0,0 @@
-#ifndef _S390_RWSEM_H
-#define _S390_RWSEM_H
-
-/*
- *  include/asm-s390/rwsem.h
- *
- *  S390 version
- *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Based on asm-alpha/semaphore.h and asm-i386/rwsem.h
- */
-
-/*
- *
- * The MSW of the count is the negated number of active writers and waiting
- * lockers, and the LSW is the total number of active locks
- *
- * The lock count is initialized to 0 (no active and no waiting lockers).
- *
- * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
- * uncontended lock. This can be determined because XADD returns the old value.
- * Readers increment by 1 and see a positive value when uncontended, negative
- * if there are writers (and maybe) readers waiting (in which case it goes to
- * sleep).
- *
- * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
- * be extended to 65534 by manually checking the whole MSW rather than relying
- * on the S flag.
- *
- * The value of ACTIVE_BIAS supports up to 65535 active processes.
- *
- * This should be totally fair - if anything is waiting, a process that wants a
- * lock will go to the back of the queue. When the currently active lock is
- * released, if there's a writer at the front of the queue, then that and only
- * that will be woken up; if there's a bunch of consequtive readers at the
- * front, then they'll all be woken up, but no other readers will be.
- */
-
-#ifndef _LINUX_RWSEM_H
-#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-struct rwsem_waiter;
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *);
-extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *);
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-	signed long		count;
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	dep_map;
-#endif
-};
-
-#ifndef __s390x__
-#define RWSEM_UNLOCKED_VALUE	0x00000000
-#define RWSEM_ACTIVE_BIAS	0x00000001
-#define RWSEM_ACTIVE_MASK	0x0000ffff
-#define RWSEM_WAITING_BIAS	(-0x00010000)
-#else /* __s390x__ */
-#define RWSEM_UNLOCKED_VALUE	0x0000000000000000L
-#define RWSEM_ACTIVE_BIAS	0x0000000000000001L
-#define RWSEM_ACTIVE_MASK	0x00000000ffffffffL
-#define RWSEM_WAITING_BIAS	(-0x0000000100000000L)
-#endif /* __s390x__ */
-#define RWSEM_ACTIVE_READ_BIAS	RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS	(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-/*
- * initialisation
- */
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
- { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait.lock), \
-   LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name) \
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-static inline void init_rwsem(struct rw_semaphore *sem)
-{
-	sem->count = RWSEM_UNLOCKED_VALUE;
-	spin_lock_init(&sem->wait_lock);
-	INIT_LIST_HEAD(&sem->wait_list);
-}
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-			 struct lock_class_key *key);
-
-#define init_rwsem(sem)				\
-do {						\
-	static struct lock_class_key __key;	\
-						\
-	__init_rwsem((sem), #sem, &__key);	\
-} while (0)
-
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
-	signed long old, new;
-
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	lr	%1,%0\n"
-		"	ahi	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	lgr	%1,%0\n"
-		"	aghi	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
-	if (old < 0)
-		rwsem_down_read_failed(sem);
-}
-
-/*
- * trylock for reading -- returns 1 if successful, 0 if contention
- */
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-	signed long old, new;
-
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	ltr	%1,%0\n"
-		"	jm	1f\n"
-		"	ahi	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b\n"
-		"1:"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	ltgr	%1,%0\n"
-		"	jm	1f\n"
-		"	aghi	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b\n"
-		"1:"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
-	return old >= 0 ? 1 : 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	signed long old, new, tmp;
-
-	tmp = RWSEM_ACTIVE_WRITE_BIAS;
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	lr	%1,%0\n"
-		"	a	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	lgr	%1,%0\n"
-		"	ag	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
-		: "cc", "memory");
-	if (old != 0)
-		rwsem_down_write_failed(sem);
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	__down_write_nested(sem, 0);
-}
-
-/*
- * trylock for writing -- returns 1 if successful, 0 if contention
- */
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-	signed long old;
-
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%2)\n"
-		"0:	ltr	%0,%0\n"
-		"	jnz	1f\n"
-		"	cs	%0,%4,0(%2)\n"
-		"	jl	0b\n"
-#else /* __s390x__ */
-		"	lg	%0,0(%2)\n"
-		"0:	ltgr	%0,%0\n"
-		"	jnz	1f\n"
-		"	csg	%0,%4,0(%2)\n"
-		"	jl	0b\n"
-#endif /* __s390x__ */
-		"1:"
-		: "=&d" (old), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory");
-	return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
-	signed long old, new;
-
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	lr	%1,%0\n"
-		"	ahi	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	lgr	%1,%0\n"
-		"	aghi	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "i" (-RWSEM_ACTIVE_READ_BIAS)
-		: "cc", "memory");
-	if (new < 0)
-		if ((new & RWSEM_ACTIVE_MASK) == 0)
-			rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
-	signed long old, new, tmp;
-
-	tmp = -RWSEM_ACTIVE_WRITE_BIAS;
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	lr	%1,%0\n"
-		"	a	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	lgr	%1,%0\n"
-		"	ag	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
-		: "cc", "memory");
-	if (new < 0)
-		if ((new & RWSEM_ACTIVE_MASK) == 0)
-			rwsem_wake(sem);
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-	signed long old, new, tmp;
-
-	tmp = -RWSEM_WAITING_BIAS;
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	lr	%1,%0\n"
-		"	a	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	lgr	%1,%0\n"
-		"	ag	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
-		: "cc", "memory");
-	if (new > 1)
-		rwsem_downgrade_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
-{
-	signed long old, new;
-
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	lr	%1,%0\n"
-		"	ar	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	lgr	%1,%0\n"
-		"	agr	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "d" (delta)
-		: "cc", "memory");
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
-{
-	signed long old, new;
-
-	asm volatile(
-#ifndef __s390x__
-		"	l	%0,0(%3)\n"
-		"0:	lr	%1,%0\n"
-		"	ar	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b"
-#else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
-		"0:	lgr	%1,%0\n"
-		"	agr	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
-		"	jl	0b"
-#endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "d" (delta)
-		: "cc", "memory");
-	return new;
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _S390_RWSEM_H */
diff --git a/include/asm-s390/s390_ext.h b/include/asm-s390/s390_ext.h
deleted file mode 100644
index 2afc060266a2..000000000000
--- a/include/asm-s390/s390_ext.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _S390_EXTINT_H
-#define _S390_EXTINT_H
-
-/*
- *  include/asm-s390/s390_ext.h
- *
- *  S390 version
- *    Copyright IBM Corp. 1999,2007
- *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- */
-
-#include <linux/types.h>
-
-typedef void (*ext_int_handler_t)(__u16 code);
-
-typedef struct ext_int_info_t {
-	struct ext_int_info_t *next;
-	ext_int_handler_t handler;
-	__u16 code;
-} ext_int_info_t;
-
-extern ext_int_info_t *ext_int_hash[];
-
-int register_external_interrupt(__u16 code, ext_int_handler_t handler);
-int register_early_external_interrupt(__u16 code, ext_int_handler_t handler,
-				      ext_int_info_t *info);
-int unregister_external_interrupt(__u16 code, ext_int_handler_t handler);
-int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
-					ext_int_info_t *info);
-
-#endif
diff --git a/include/asm-s390/s390_rdev.h b/include/asm-s390/s390_rdev.h
deleted file mode 100644
index 6fa20442a48c..000000000000
--- a/include/asm-s390/s390_rdev.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  include/asm-s390/ccwdev.h
- *
- *    Copyright (C) 2002,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
- *               Carsten Otte  <cotte@de.ibm.com>
- *
- *  Interface for s390 root device
- */
-
-#ifndef _S390_RDEV_H_
-#define _S390_RDEV_H_
-extern struct device *s390_root_dev_register(const char *);
-extern void s390_root_dev_unregister(struct device *);
-#endif /* _S390_RDEV_H_ */
diff --git a/include/asm-s390/scatterlist.h b/include/asm-s390/scatterlist.h
deleted file mode 100644
index 29ec8e28c8df..000000000000
--- a/include/asm-s390/scatterlist.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASMS390_SCATTERLIST_H
-#define _ASMS390_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-    unsigned long sg_magic;
-#endif
-    unsigned long page_link;
-    unsigned int offset;
-    unsigned int length;
-};
-
-#ifdef __s390x__
-#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
-#else
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-#endif
-
-#endif /* _ASMS390X_SCATTERLIST_H */
diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h
deleted file mode 100644
index 7bdc0fe15691..000000000000
--- a/include/asm-s390/schid.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef ASM_SCHID_H
-#define ASM_SCHID_H
-
-struct subchannel_id {
-	__u32 cssid : 8;
-	__u32 : 4;
-	__u32 m : 1;
-	__u32 ssid : 2;
-	__u32 one : 1;
-	__u32 sch_no : 16;
-} __attribute__ ((packed, aligned(4)));
-
-#ifdef __KERNEL__
-
-/* Helper function for sane state of pre-allocated subchannel_id. */
-static inline void
-init_subchannel_id(struct subchannel_id *schid)
-{
-	memset(schid, 0, sizeof(struct subchannel_id));
-	schid->one = 1;
-}
-
-static inline int
-schid_equal(struct subchannel_id *schid1, struct subchannel_id *schid2)
-{
-	return !memcmp(schid1, schid2, sizeof(struct subchannel_id));
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* ASM_SCHID_H */
diff --git a/include/asm-s390/sclp.h b/include/asm-s390/sclp.h
deleted file mode 100644
index fed7bee650a0..000000000000
--- a/include/asm-s390/sclp.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  include/asm-s390/sclp.h
- *
- *    Copyright IBM Corp. 2007
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- */
-
-#ifndef _ASM_S390_SCLP_H
-#define _ASM_S390_SCLP_H
-
-#include <linux/types.h>
-#include <asm/chpid.h>
-
-#define SCLP_CHP_INFO_MASK_SIZE		32
-
-struct sclp_chp_info {
-	u8 recognized[SCLP_CHP_INFO_MASK_SIZE];
-	u8 standby[SCLP_CHP_INFO_MASK_SIZE];
-	u8 configured[SCLP_CHP_INFO_MASK_SIZE];
-};
-
-#define LOADPARM_LEN 8
-
-struct sclp_ipl_info {
-	int is_valid;
-	int has_dump;
-	char loadparm[LOADPARM_LEN];
-};
-
-struct sclp_cpu_entry {
-	u8 address;
-	u8 reserved0[13];
-	u8 type;
-	u8 reserved1;
-} __attribute__((packed));
-
-struct sclp_cpu_info {
-	unsigned int configured;
-	unsigned int standby;
-	unsigned int combined;
-	int has_cpu_type;
-	struct sclp_cpu_entry cpu[255];
-};
-
-int sclp_get_cpu_info(struct sclp_cpu_info *info);
-int sclp_cpu_configure(u8 cpu);
-int sclp_cpu_deconfigure(u8 cpu);
-void sclp_facilities_detect(void);
-unsigned long long sclp_get_rnmax(void);
-unsigned long long sclp_get_rzm(void);
-int sclp_sdias_blk_count(void);
-int sclp_sdias_copy(void *dest, int blk_num, int nr_blks);
-int sclp_chp_configure(struct chp_id chpid);
-int sclp_chp_deconfigure(struct chp_id chpid);
-int sclp_chp_read_info(struct sclp_chp_info *info);
-void sclp_get_ipl_info(struct sclp_ipl_info *info);
-
-#endif /* _ASM_S390_SCLP_H */
diff --git a/include/asm-s390/sections.h b/include/asm-s390/sections.h
deleted file mode 100644
index fbd9116eb17b..000000000000
--- a/include/asm-s390/sections.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _S390_SECTIONS_H
-#define _S390_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern char _eshared[], _ehead[];
-
-#endif
diff --git a/include/asm-s390/segment.h b/include/asm-s390/segment.h
deleted file mode 100644
index 8bfce3475b1c..000000000000
--- a/include/asm-s390/segment.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_SEGMENT_H
-#define _ASM_SEGMENT_H
-
-#endif
diff --git a/include/asm-s390/semaphore.h b/include/asm-s390/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-s390/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-s390/sembuf.h b/include/asm-s390/sembuf.h
deleted file mode 100644
index 32626b0cac4b..000000000000
--- a/include/asm-s390/sembuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _S390_SEMBUF_H
-#define _S390_SEMBUF_H
-
-/* 
- * The semid64_ds structure for S/390 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem (for !__s390x__)
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-#ifndef __s390x__
-	unsigned long	__unused1;
-#endif /* ! __s390x__ */
-	__kernel_time_t	sem_ctime;		/* last change time */
-#ifndef __s390x__
-	unsigned long	__unused2;
-#endif /* ! __s390x__ */
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _S390_SEMBUF_H */
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
deleted file mode 100644
index 4ba14e463e83..000000000000
--- a/include/asm-s390/setup.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  include/asm-s390/setup.h
- *
- *  S390 version
- *    Copyright IBM Corp. 1999,2006
- */
-
-#ifndef _ASM_S390_SETUP_H
-#define _ASM_S390_SETUP_H
-
-#define COMMAND_LINE_SIZE	1024
-
-#define ARCH_COMMAND_LINE_SIZE	896
-
-#ifdef __KERNEL__
-
-#include <asm/types.h>
-
-#define PARMAREA		0x10400
-#define MEMORY_CHUNKS		256
-
-#ifndef __ASSEMBLY__
-
-#ifndef __s390x__
-#define IPL_DEVICE        (*(unsigned long *)  (0x10404))
-#define INITRD_START      (*(unsigned long *)  (0x1040C))
-#define INITRD_SIZE       (*(unsigned long *)  (0x10414))
-#else /* __s390x__ */
-#define IPL_DEVICE        (*(unsigned long *)  (0x10400))
-#define INITRD_START      (*(unsigned long *)  (0x10408))
-#define INITRD_SIZE       (*(unsigned long *)  (0x10410))
-#endif /* __s390x__ */
-#define COMMAND_LINE      ((char *)            (0x10480))
-
-#define CHUNK_READ_WRITE 0
-#define CHUNK_READ_ONLY  1
-
-struct mem_chunk {
-	unsigned long addr;
-	unsigned long size;
-	int type;
-};
-
-extern struct mem_chunk memory_chunk[];
-extern unsigned long real_memory_size;
-
-void detect_memory_layout(struct mem_chunk chunk[]);
-
-#ifdef CONFIG_S390_SWITCH_AMODE
-extern unsigned int switch_amode;
-#else
-#define switch_amode	(0)
-#endif
-
-#ifdef CONFIG_S390_EXEC_PROTECT
-extern unsigned int s390_noexec;
-#else
-#define s390_noexec	(0)
-#endif
-
-/*
- * Machine features detected in head.S
- */
-extern unsigned long machine_flags;
-
-#define MACHINE_FLAG_VM		(1UL << 0)
-#define MACHINE_FLAG_IEEE	(1UL << 1)
-#define MACHINE_FLAG_P390	(1UL << 2)
-#define MACHINE_FLAG_CSP	(1UL << 3)
-#define MACHINE_FLAG_MVPG	(1UL << 4)
-#define MACHINE_FLAG_DIAG44	(1UL << 5)
-#define MACHINE_FLAG_IDTE	(1UL << 6)
-#define MACHINE_FLAG_DIAG9C	(1UL << 7)
-#define MACHINE_FLAG_MVCOS	(1UL << 8)
-#define MACHINE_FLAG_KVM	(1UL << 9)
-#define MACHINE_FLAG_HPAGE	(1UL << 10)
-#define MACHINE_FLAG_PFMF	(1UL << 11)
-
-#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
-
-#ifndef __s390x__
-#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
-#define MACHINE_HAS_IDTE	(0)
-#define MACHINE_HAS_DIAG44	(1)
-#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
-#define MACHINE_HAS_MVCOS	(0)
-#define MACHINE_HAS_HPAGE	(0)
-#define MACHINE_HAS_PFMF	(0)
-#else /* __s390x__ */
-#define MACHINE_HAS_IEEE	(1)
-#define MACHINE_HAS_CSP		(1)
-#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
-#define MACHINE_HAS_MVPG	(1)
-#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
-#endif /* __s390x__ */
-
-#define ZFCPDUMP_HSA_SIZE	(32UL<<20)
-
-/*
- * Console mode. Override with conmode=
- */
-extern unsigned int console_mode;
-extern unsigned int console_devno;
-extern unsigned int console_irq;
-
-extern char vmhalt_cmd[];
-extern char vmpoff_cmd[];
-
-#define CONSOLE_IS_UNDEFINED	(console_mode == 0)
-#define CONSOLE_IS_SCLP		(console_mode == 1)
-#define CONSOLE_IS_3215		(console_mode == 2)
-#define CONSOLE_IS_3270		(console_mode == 3)
-#define SET_CONSOLE_SCLP	do { console_mode = 1; } while (0)
-#define SET_CONSOLE_3215	do { console_mode = 2; } while (0)
-#define SET_CONSOLE_3270	do { console_mode = 3; } while (0)
-
-#define NSS_NAME_SIZE	8
-extern char kernel_nss_name[];
-
-#else /* __ASSEMBLY__ */
-
-#ifndef __s390x__
-#define IPL_DEVICE        0x10404
-#define INITRD_START      0x1040C
-#define INITRD_SIZE       0x10414
-#else /* __s390x__ */
-#define IPL_DEVICE        0x10400
-#define INITRD_START      0x10408
-#define INITRD_SIZE       0x10410
-#endif /* __s390x__ */
-#define COMMAND_LINE      0x10480
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_S390_SETUP_H */
diff --git a/include/asm-s390/sfp-machine.h b/include/asm-s390/sfp-machine.h
deleted file mode 100644
index 4e16aede4b06..000000000000
--- a/include/asm-s390/sfp-machine.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* Machine-dependent software floating-point definitions.
-   S/390 kernel version.
-   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Richard Henderson (rth@cygnus.com),
-		  Jakub Jelinek (jj@ultra.linux.cz),
-		  David S. Miller (davem@redhat.com) and
-		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If
-   not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-   
-
-#define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned int
-#define _FP_WS_TYPE		signed int
-#define _FP_I_TYPE		int
-
-#define _FP_MUL_MEAT_S(R,X,Y)					\
-  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y)					\
-  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y)					\
-  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
-#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
-#define _FP_NANSIGN_S		0
-#define _FP_NANSIGN_D		0
-#define _FP_NANSIGN_Q		0
-
-#define _FP_KEEPNANFRACP 1
-
-/*
- * If one NaN is signaling and the other is not,
- * we choose that one, otherwise we choose X.
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
-  do {                                                          \
-    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
-        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
-      {                                                         \
-        R##_s = Y##_s;                                          \
-        _FP_FRAC_COPY_##wc(R,Y);                                \
-      }                                                         \
-    else                                                        \
-      {                                                         \
-        R##_s = X##_s;                                          \
-        _FP_FRAC_COPY_##wc(R,X);                                \
-      }                                                         \
-    R##_c = FP_CLS_NAN;                                         \
-  } while (0)
-
-/* Some assembly to speed things up. */
-#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
-	unsigned int __r2 = (x2) + (y2);			\
-	unsigned int __r1 = (x1);				\
-	unsigned int __r0 = (x0);				\
-	asm volatile(						\
-		"	alr	%2,%3\n"			\
-		"	brc	12,0f\n"			\
-		"	lhi	0,1\n"				\
-		"	alr	%1,0\n"				\
-		"	brc	12,0f\n"			\
-		"	alr	%0,0\n"				\
-		"0:"						\
-		: "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
-		: "d" (y0), "i" (1) : "cc", "0" );		\
-	asm volatile(						\
-		"	alr	%1,%2\n"			\
-		"	brc	12,0f\n"			\
-		"	ahi	%0,1\n"				\
-		"0:"						\
-		: "+&d" (__r2), "+&d" (__r1)			\
-		: "d" (y1) : "cc");				\
-	(r2) = __r2;						\
-	(r1) = __r1;						\
-	(r0) = __r0;						\
-})
-
-#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
-	unsigned int __r2 = (x2) - (y2);			\
-	unsigned int __r1 = (x1);				\
-	unsigned int __r0 = (x0);				\
-	asm volatile(						\
-		"	slr   %2,%3\n"				\
-		"	brc	3,0f\n"				\
-		"	lhi	0,1\n"				\
-		"	slr	%1,0\n"				\
-		"	brc	3,0f\n"				\
-		"	slr	%0,0\n"				\
-		"0:"						\
-		: "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
-		: "d" (y0) : "cc", "0");			\
-	asm volatile(						\
-		"	slr	%1,%2\n"			\
-		"	brc	3,0f\n"				\
-		"	ahi	%0,-1\n"			\
-		"0:"						\
-		: "+&d" (__r2), "+&d" (__r1)			\
-		: "d" (y1) : "cc");				\
-	(r2) = __r2;						\
-	(r1) = __r1;						\
-	(r0) = __r0;						\
-})
-
-#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
-
-/* Obtain the current rounding mode. */
-#define FP_ROUNDMODE	mode
-
-/* Exception flags. */
-#define FP_EX_INVALID		0x800000
-#define FP_EX_DIVZERO		0x400000
-#define FP_EX_OVERFLOW		0x200000
-#define FP_EX_UNDERFLOW		0x100000
-#define FP_EX_INEXACT		0x080000
-
-/* We write the results always */
-#define FP_INHIBIT_RESULTS 0
-
-#endif
diff --git a/include/asm-s390/sfp-util.h b/include/asm-s390/sfp-util.h
deleted file mode 100644
index 0addc6466d95..000000000000
--- a/include/asm-s390/sfp-util.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({		\
-	unsigned int __sh = (ah);			\
-	unsigned int __sl = (al);			\
-	asm volatile(					\
-		"	alr	%1,%3\n"		\
-		"	brc	12,0f\n"		\
-		"	ahi	%0,1\n"			\
-		"0:	alr  %0,%2"			\
-		: "+&d" (__sh), "+d" (__sl)		\
-		: "d" (bh), "d" (bl) : "cc");		\
-	(sh) = __sh;					\
-	(sl) = __sl;					\
-})
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({		\
-	unsigned int __sh = (ah);			\
-	unsigned int __sl = (al);			\
-	asm volatile(					\
-		"	slr	%1,%3\n"		\
-		"	brc	3,0f\n"			\
-		"	ahi	%0,-1\n"		\
-		"0:	slr	%0,%2"			\
-		: "+&d" (__sh), "+d" (__sl)		\
-		: "d" (bh), "d" (bl) : "cc");		\
-	(sh) = __sh;					\
-	(sl) = __sl;					\
-})
-
-/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */
-#define umul_ppmm(wh, wl, u, v) ({			\
-	unsigned int __wh = u;				\
-	unsigned int __wl = v;				\
-	asm volatile(					\
-		"	ltr	1,%0\n"			\
-		"	mr	0,%1\n"			\
-		"	jnm	0f\n"				\
-		"	alr	0,%1\n"			\
-		"0:	ltr	%1,%1\n"			\
-		"	jnm	1f\n"				\
-		"	alr	0,%0\n"			\
-		"1:	lr	%0,0\n"			\
-		"	lr	%1,1\n"			\
-		: "+d" (__wh), "+d" (__wl)		\
-		: : "0", "1", "cc");			\
-	wh = __wh;					\
-	wl = __wl;					\
-})
-
-#ifdef __s390x__
-#define udiv_qrnnd(q, r, n1, n0, d)			\
-  do { unsigned long __n;				\
-       unsigned int __r, __d;				\
-    __n = ((unsigned long)(n1) << 32) + n0;		\
-    __d = (d);						\
-    (q) = __n / __d;					\
-    (r) = __n % __d;					\
-  } while (0)
-#else
-#define udiv_qrnnd(q, r, n1, n0, d)			\
-  do { unsigned int __r;				\
-    (q) = __udiv_qrnnd (&__r, (n1), (n0), (d));		\
-    (r) = __r;						\
-  } while (0)
-extern unsigned long __udiv_qrnnd (unsigned int *, unsigned int,
-				   unsigned int , unsigned int);
-#endif
-
-#define UDIV_NEEDS_NORMALIZATION 0
-
-#define abort() return 0
-
-#define __BYTE_ORDER __BIG_ENDIAN
diff --git a/include/asm-s390/shmbuf.h b/include/asm-s390/shmbuf.h
deleted file mode 100644
index eed2e280ce37..000000000000
--- a/include/asm-s390/shmbuf.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _S390_SHMBUF_H
-#define _S390_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for S/390 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem (for !__s390x__)
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-#ifndef __s390x__
-	unsigned long		__unused1;
-#endif /* ! __s390x__ */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-#ifndef __s390x__
-	unsigned long		__unused2;
-#endif /* ! __s390x__ */
-	__kernel_time_t		shm_ctime;	/* last change time */
-#ifndef __s390x__
-	unsigned long		__unused3;
-#endif /* ! __s390x__ */
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _S390_SHMBUF_H */
diff --git a/include/asm-s390/shmparam.h b/include/asm-s390/shmparam.h
deleted file mode 100644
index c2e0c0508e73..000000000000
--- a/include/asm-s390/shmparam.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  include/asm-s390/shmparam.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/shmparam.h"
- */
-#ifndef _ASM_S390_SHMPARAM_H
-#define _ASM_S390_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
-
-#endif /* _ASM_S390_SHMPARAM_H */
diff --git a/include/asm-s390/sigcontext.h b/include/asm-s390/sigcontext.h
deleted file mode 100644
index aeb6e0b13329..000000000000
--- a/include/asm-s390/sigcontext.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  include/asm-s390/sigcontext.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- */
-
-#ifndef _ASM_S390_SIGCONTEXT_H
-#define _ASM_S390_SIGCONTEXT_H
-
-#include <linux/compiler.h>
-
-#define __NUM_GPRS 16
-#define __NUM_FPRS 16
-#define __NUM_ACRS 16
-
-#ifndef __s390x__
-
-/* Has to be at least _NSIG_WORDS from asm/signal.h */
-#define _SIGCONTEXT_NSIG	64
-#define _SIGCONTEXT_NSIG_BPW	32
-/* Size of stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE	96
-
-#else /* __s390x__ */
-
-/* Has to be at least _NSIG_WORDS from asm/signal.h */
-#define _SIGCONTEXT_NSIG	64
-#define _SIGCONTEXT_NSIG_BPW	64 
-/* Size of stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE	160
-
-#endif /* __s390x__ */
-
-#define _SIGCONTEXT_NSIG_WORDS	(_SIGCONTEXT_NSIG / _SIGCONTEXT_NSIG_BPW)
-#define _SIGMASK_COPY_SIZE	(sizeof(unsigned long)*_SIGCONTEXT_NSIG_WORDS)
-
-typedef struct 
-{
-        unsigned long mask;
-        unsigned long addr;
-} __attribute__ ((aligned(8))) _psw_t;
-
-typedef struct
-{
-	_psw_t psw;
-	unsigned long gprs[__NUM_GPRS];
-	unsigned int  acrs[__NUM_ACRS];
-} _s390_regs_common;
-
-typedef struct
-{
-	unsigned int fpc;
-	double   fprs[__NUM_FPRS];
-} _s390_fp_regs;
-
-typedef struct
-{
-	_s390_regs_common regs;
-	_s390_fp_regs     fpregs;
-} _sigregs;
-
-struct sigcontext
-{
-	unsigned long	oldmask[_SIGCONTEXT_NSIG_WORDS];
-	_sigregs        __user *sregs;
-};
-
-
-#endif
-
diff --git a/include/asm-s390/siginfo.h b/include/asm-s390/siginfo.h
deleted file mode 100644
index e0ff1ab054be..000000000000
--- a/include/asm-s390/siginfo.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  include/asm-s390/siginfo.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/siginfo.h"
- */
-
-#ifndef _S390_SIGINFO_H
-#define _S390_SIGINFO_H
-
-#ifdef __s390x__
-#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
-#endif
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/include/asm-s390/signal.h b/include/asm-s390/signal.h
deleted file mode 100644
index f6cfddb278cb..000000000000
--- a/include/asm-s390/signal.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *  include/asm-s390/signal.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/signal.h"
- */
-
-#ifndef _ASMS390_SIGNAL_H
-#define _ASMS390_SIGNAL_H
-
-#include <linux/types.h>
-#include <linux/time.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-struct pt_regs;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-#include <asm/sigcontext.h>
-#define _NSIG           _SIGCONTEXT_NSIG
-#define _NSIG_BPW       _SIGCONTEXT_NSIG_BPW
-#define _NSIG_WORDS     _SIGCONTEXT_NSIG_WORDS
-
-typedef unsigned long old_sigset_t;             /* at least 32 bits */
-
-typedef struct {
-        unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG            32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP           1
-#define SIGINT           2
-#define SIGQUIT          3
-#define SIGILL           4
-#define SIGTRAP          5
-#define SIGABRT          6
-#define SIGIOT           6
-#define SIGBUS           7
-#define SIGFPE           8
-#define SIGKILL          9
-#define SIGUSR1         10
-#define SIGSEGV         11
-#define SIGUSR2         12
-#define SIGPIPE         13
-#define SIGALRM         14
-#define SIGTERM         15
-#define SIGSTKFLT       16
-#define SIGCHLD         17
-#define SIGCONT         18
-#define SIGSTOP         19
-#define SIGTSTP         20
-#define SIGTTIN         21
-#define SIGTTOU         22
-#define SIGURG          23
-#define SIGXCPU         24
-#define SIGXFSZ         25
-#define SIGVTALRM       26
-#define SIGPROF         27
-#define SIGWINCH        28
-#define SIGIO           29
-#define SIGPOLL         SIGIO
-/*
-#define SIGLOST         29
-*/
-#define SIGPWR          30
-#define SIGSYS		31
-#define SIGUNUSED       31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN        32
-#define SIGRTMAX        _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP    0x00000001
-#define SA_NOCLDWAIT    0x00000002
-#define SA_SIGINFO      0x00000004
-#define SA_ONSTACK      0x08000000
-#define SA_RESTART      0x10000000
-#define SA_NODEFER      0x40000000
-#define SA_RESETHAND    0x80000000
-
-#define SA_NOMASK       SA_NODEFER
-#define SA_ONESHOT      SA_RESETHAND
-
-#define SA_RESTORER     0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK      1
-#define SS_DISABLE      2
-
-#define MINSIGSTKSZ     2048
-#define SIGSTKSZ        8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-        __sighandler_t sa_handler;
-        old_sigset_t sa_mask;
-        unsigned long sa_flags;
-        void (*sa_restorer)(void);
-};
-
-struct sigaction {
-        __sighandler_t sa_handler;
-        unsigned long sa_flags;
-        void (*sa_restorer)(void);
-        sigset_t sa_mask;               /* mask last for extensibility */
-};
-
-struct k_sigaction {
-        struct sigaction sa;
-};
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-        union {
-          __sighandler_t _sa_handler;
-          void (*_sa_sigaction)(int, struct siginfo *, void *);
-        } _u;
-#ifndef __s390x__ /* lovely */
-        sigset_t sa_mask;
-        unsigned long sa_flags;
-        void (*sa_restorer)(void);
-#else  /* __s390x__ */
-        unsigned long sa_flags;
-        void (*sa_restorer)(void);
-	sigset_t sa_mask;
-#endif /* __s390x__ */
-};
-
-#define sa_handler      _u._sa_handler
-#define sa_sigaction    _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-        void __user *ss_sp;
-        int ss_flags;
-        size_t ss_size;
-} stack_t;
-
-
-#endif
diff --git a/include/asm-s390/sigp.h b/include/asm-s390/sigp.h
deleted file mode 100644
index e16d56f8dfe1..000000000000
--- a/include/asm-s390/sigp.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *  include/asm-s390/sigp.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *               Heiko Carstens (heiko.carstens@de.ibm.com)
- *
- *  sigp.h by D.J. Barrow (c) IBM 1999
- *  contains routines / structures for signalling other S/390 processors in an
- *  SMP configuration.
- */
-
-#ifndef __SIGP__
-#define __SIGP__
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-
-/* get real cpu address from logical cpu number */
-extern volatile int __cpu_logical_map[];
-
-typedef enum
-{
-	sigp_unassigned=0x0,
-	sigp_sense,
-	sigp_external_call,
-	sigp_emergency_signal,
-	sigp_start,
-	sigp_stop,
-	sigp_restart,
-	sigp_unassigned1,
-	sigp_unassigned2,
-	sigp_stop_and_store_status,
-	sigp_unassigned3,
-	sigp_initial_cpu_reset,
-	sigp_cpu_reset,
-	sigp_set_prefix,
-	sigp_store_status_at_address,
-	sigp_store_extended_status_at_address
-} sigp_order_code;
-
-typedef __u32 sigp_status_word;
-
-typedef enum
-{
-        sigp_order_code_accepted=0,
-	sigp_status_stored,
-	sigp_busy,
-	sigp_not_operational
-} sigp_ccode;
-
-
-/*
- * Definitions for the external call
- */
-
-/* 'Bit' signals, asynchronous */
-typedef enum
-{
-	ec_schedule=0,
-	ec_call_function,
-	ec_bit_last
-} ec_bit_sig;
-
-/*
- * Signal processor
- */
-static inline sigp_ccode
-signal_processor(__u16 cpu_addr, sigp_order_code order_code)
-{
-	register unsigned long reg1 asm ("1") = 0;
-	sigp_ccode ccode;
-
-	asm volatile(
-		"	sigp	%1,%2,0(%3)\n"
-		"	ipm	%0\n"
-		"	srl	%0,28\n"
-		:	"=d"	(ccode)
-		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
-		  "a" (order_code) : "cc" , "memory");
-	return ccode;
-}
-
-/*
- * Signal processor with parameter
- */
-static inline sigp_ccode
-signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code)
-{
-	register unsigned int reg1 asm ("1") = parameter;
-	sigp_ccode ccode;
-
-	asm volatile(
-		"	sigp	%1,%2,0(%3)\n"
-		"	ipm	%0\n"
-		"	srl	%0,28\n"
-		: "=d" (ccode)
-		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
-		  "a" (order_code) : "cc" , "memory");
-	return ccode;
-}
-
-/*
- * Signal processor with parameter and return status
- */
-static inline sigp_ccode
-signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr,
-		    sigp_order_code order_code)
-{
-	register unsigned int reg1 asm ("1") = parameter;
-	sigp_ccode ccode;
-
-	asm volatile(
-		"	sigp	%1,%2,0(%3)\n"
-		"	ipm	%0\n"
-		"	srl	%0,28\n"
-		: "=d" (ccode), "+d" (reg1)
-		: "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
-		: "cc" , "memory");
-	*statusptr = reg1;
-	return ccode;
-}
-
-#endif /* __SIGP__ */
diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h
deleted file mode 100644
index ae89cf2478fc..000000000000
--- a/include/asm-s390/smp.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  include/asm-s390/smp.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *               Heiko Carstens (heiko.carstens@de.ibm.com)
- */
-#ifndef __ASM_SMP_H
-#define __ASM_SMP_H
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
-
-#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__)
-
-#include <asm/lowcore.h>
-#include <asm/sigp.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-
-/*
-  s390 specific smp.c headers
- */
-typedef struct
-{
-	int        intresting;
-	sigp_ccode ccode; 
-	__u32      status;
-	__u16      cpu;
-} sigp_info;
-
-extern void machine_restart_smp(char *);
-extern void machine_halt_smp(void);
-extern void machine_power_off_smp(void);
-
-#define NO_PROC_ID		0xFF		/* No processor magic marker */
-
-/*
- *	This magic constant controls our willingness to transfer
- *	a process across CPUs. Such a transfer incurs misses on the L1
- *	cache, and on a P6 or P5 with multiple L2 caches L2 hits. My
- *	gut feeling is this will vary by board in value. For a board
- *	with separate L2 cache it probably depends also on the RSS, and
- *	for a board with shared L2 cache it ought to decay fast as other
- *	processes are run.
- */
- 
-#define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
-
-#define raw_smp_processor_id()	(S390_lowcore.cpu_data.cpu_nr)
-
-static inline __u16 hard_smp_processor_id(void)
-{
-	return stap();
-}
-
-/*
- * returns 1 if cpu is in stopped/check stopped state or not operational
- * returns 0 otherwise
- */
-static inline int
-smp_cpu_not_running(int cpu)
-{
-	__u32 status;
-
-	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
-	case sigp_order_code_accepted:
-	case sigp_status_stored:
-		/* Check for stopped and check stop state */
-		if (status & 0x50)
-			return 1;
-		break;
-	case sigp_not_operational:
-		return 1;
-	default:
-		break;
-	}
-	return 0;
-}
-
-#define cpu_logical_map(cpu) (cpu)
-
-extern int __cpu_disable (void);
-extern void __cpu_die (unsigned int cpu);
-extern void cpu_die (void) __attribute__ ((noreturn));
-extern int __cpu_up (unsigned int cpu);
-
-extern struct mutex smp_cpu_state_mutex;
-extern int smp_cpu_polarization[];
-
-extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
-	void *info, int wait);
-#endif
-
-#ifndef CONFIG_SMP
-static inline void smp_send_stop(void)
-{
-	/* Disable all interrupts/machine checks */
-	__load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
-}
-
-#define hard_smp_processor_id()		0
-#define smp_cpu_not_running(cpu)	1
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern int smp_rescan_cpus(void);
-#else
-static inline int smp_rescan_cpus(void) { return 0; }
-#endif
-
-extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
-#endif
diff --git a/include/asm-s390/socket.h b/include/asm-s390/socket.h
deleted file mode 100644
index c786ab623b2d..000000000000
--- a/include/asm-s390/socket.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  include/asm-s390/socket.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/socket.h"
- */
-
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-s390/sockios.h b/include/asm-s390/sockios.h
deleted file mode 100644
index f4fc16c7da59..000000000000
--- a/include/asm-s390/sockios.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  include/asm-s390/sockios.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/sockios.h"
- */
-
-#ifndef __ARCH_S390_SOCKIOS__
-#define __ARCH_S390_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif
diff --git a/include/asm-s390/sparsemem.h b/include/asm-s390/sparsemem.h
deleted file mode 100644
index 545d219e6a2d..000000000000
--- a/include/asm-s390/sparsemem.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_S390_SPARSEMEM_H
-#define _ASM_S390_SPARSEMEM_H
-
-#ifdef CONFIG_64BIT
-
-#define SECTION_SIZE_BITS	28
-#define MAX_PHYSADDR_BITS	42
-#define MAX_PHYSMEM_BITS	42
-
-#else
-
-#define SECTION_SIZE_BITS	25
-#define MAX_PHYSADDR_BITS	31
-#define MAX_PHYSMEM_BITS	31
-
-#endif /* CONFIG_64BIT */
-
-#endif /* _ASM_S390_SPARSEMEM_H */
diff --git a/include/asm-s390/spinlock.h b/include/asm-s390/spinlock.h
deleted file mode 100644
index df84ae96915f..000000000000
--- a/include/asm-s390/spinlock.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- *  include/asm-s390/spinlock.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/spinlock.h"
- */
-
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#include <linux/smp.h>
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
-static inline int
-_raw_compare_and_swap(volatile unsigned int *lock,
-		      unsigned int old, unsigned int new)
-{
-	asm volatile(
-		"	cs	%0,%3,%1"
-		: "=d" (old), "=Q" (*lock)
-		: "0" (old), "d" (new), "Q" (*lock)
-		: "cc", "memory" );
-	return old;
-}
-
-#else /* __GNUC__ */
-
-static inline int
-_raw_compare_and_swap(volatile unsigned int *lock,
-		      unsigned int old, unsigned int new)
-{
-	asm volatile(
-		"	cs	%0,%3,0(%4)"
-		: "=d" (old), "=m" (*lock)
-		: "0" (old), "d" (new), "a" (lock), "m" (*lock)
-		: "cc", "memory" );
-	return old;
-}
-
-#endif /* __GNUC__ */
-
-/*
- * Simple spin lock operations.  There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- *
- * (the type definitions are in asm/spinlock_types.h)
- */
-
-#define __raw_spin_is_locked(x) ((x)->owner_cpu != 0)
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) \
-		 _raw_spin_relax(lock); } while (0)
-
-extern void _raw_spin_lock_wait(raw_spinlock_t *);
-extern void _raw_spin_lock_wait_flags(raw_spinlock_t *, unsigned long flags);
-extern int _raw_spin_trylock_retry(raw_spinlock_t *);
-extern void _raw_spin_relax(raw_spinlock_t *lock);
-
-static inline void __raw_spin_lock(raw_spinlock_t *lp)
-{
-	int old;
-
-	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
-	if (likely(old == 0))
-		return;
-	_raw_spin_lock_wait(lp);
-}
-
-static inline void __raw_spin_lock_flags(raw_spinlock_t *lp,
-					 unsigned long flags)
-{
-	int old;
-
-	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
-	if (likely(old == 0))
-		return;
-	_raw_spin_lock_wait_flags(lp, flags);
-}
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lp)
-{
-	int old;
-
-	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
-	if (likely(old == 0))
-		return 1;
-	return _raw_spin_trylock_retry(lp);
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lp)
-{
-	_raw_compare_and_swap(&lp->owner_cpu, lp->owner_cpu, 0);
-}
-		
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-/**
- * read_can_lock - would read_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define __raw_read_can_lock(x) ((int)(x)->lock >= 0)
-
-/**
- * write_can_lock - would write_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define __raw_write_can_lock(x) ((x)->lock == 0)
-
-extern void _raw_read_lock_wait(raw_rwlock_t *lp);
-extern int _raw_read_trylock_retry(raw_rwlock_t *lp);
-extern void _raw_write_lock_wait(raw_rwlock_t *lp);
-extern int _raw_write_trylock_retry(raw_rwlock_t *lp);
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
-	unsigned int old;
-	old = rw->lock & 0x7fffffffU;
-	if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old)
-		_raw_read_lock_wait(rw);
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
-	unsigned int old, cmp;
-
-	old = rw->lock;
-	do {
-		cmp = old;
-		old = _raw_compare_and_swap(&rw->lock, old, old - 1);
-	} while (cmp != old);
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
-	if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0))
-		_raw_write_lock_wait(rw);
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
-	_raw_compare_and_swap(&rw->lock, 0x80000000, 0);
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *rw)
-{
-	unsigned int old;
-	old = rw->lock & 0x7fffffffU;
-	if (likely(_raw_compare_and_swap(&rw->lock, old, old + 1) == old))
-		return 1;
-	return _raw_read_trylock_retry(rw);
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
-{
-	if (likely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0))
-		return 1;
-	return _raw_write_trylock_retry(rw);
-}
-
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
-
-#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-s390/spinlock_types.h b/include/asm-s390/spinlock_types.h
deleted file mode 100644
index 654abc40de04..000000000000
--- a/include/asm-s390/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SPINLOCK_TYPES_H
-#define __ASM_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned int owner_cpu;
-} __attribute__ ((aligned (4))) raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
-
-#endif
diff --git a/include/asm-s390/stat.h b/include/asm-s390/stat.h
deleted file mode 100644
index d92959eebb65..000000000000
--- a/include/asm-s390/stat.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  include/asm-s390/stat.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/stat.h"
- */
-
-#ifndef _S390_STAT_H
-#define _S390_STAT_H
-
-#ifndef __s390x__
-struct __old_kernel_stat {
-        unsigned short st_dev;
-        unsigned short st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned short st_rdev;
-        unsigned long  st_size;
-        unsigned long  st_atime;
-        unsigned long  st_mtime;
-        unsigned long  st_ctime;
-};
-
-struct stat {
-        unsigned short st_dev;
-        unsigned short __pad1;
-        unsigned long  st_ino;
-        unsigned short st_mode;
-        unsigned short st_nlink;
-        unsigned short st_uid;
-        unsigned short st_gid;
-        unsigned short st_rdev;
-        unsigned short __pad2;
-        unsigned long  st_size;
-        unsigned long  st_blksize;
-        unsigned long  st_blocks;
-        unsigned long  st_atime;
-        unsigned long  st_atime_nsec;
-        unsigned long  st_mtime;
-        unsigned long  st_mtime_nsec;
-        unsigned long  st_ctime;
-        unsigned long  st_ctime_nsec;
-        unsigned long  __unused4;
-        unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-        unsigned long long	st_dev;
-        unsigned int    __pad1;
-#define STAT64_HAS_BROKEN_ST_INO        1
-        unsigned long   __st_ino;
-        unsigned int    st_mode;
-        unsigned int    st_nlink;
-        unsigned long   st_uid;
-        unsigned long   st_gid;
-        unsigned long long	st_rdev;
-        unsigned int    __pad3;
-        long long	st_size;
-        unsigned long   st_blksize;
-        unsigned char   __pad4[4];
-        unsigned long   __pad5;     /* future possible st_blocks high bits */
-        unsigned long   st_blocks;  /* Number 512-byte blocks allocated. */
-        unsigned long   st_atime;
-        unsigned long   st_atime_nsec;
-        unsigned long   st_mtime;
-        unsigned long   st_mtime_nsec;
-        unsigned long   st_ctime;
-        unsigned long   st_ctime_nsec;  /* will be high 32 bits of ctime someday */
-        unsigned long long	st_ino;
-};
-
-#else /* __s390x__ */
-
-struct stat {
-        unsigned long  st_dev;
-        unsigned long  st_ino;
-        unsigned long  st_nlink;
-        unsigned int   st_mode;
-        unsigned int   st_uid;
-        unsigned int   st_gid;
-        unsigned int   __pad1;
-        unsigned long  st_rdev;
-        unsigned long  st_size;
-        unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-        unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-        unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-        unsigned long  st_blksize;
-        long           st_blocks;
-        unsigned long  __unused[3];
-};
-
-#endif /* __s390x__ */
-
-#define STAT_HAVE_NSEC 1
-
-#endif
diff --git a/include/asm-s390/statfs.h b/include/asm-s390/statfs.h
deleted file mode 100644
index 099a45579190..000000000000
--- a/include/asm-s390/statfs.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  include/asm-s390/statfs.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/statfs.h"
- */
-
-#ifndef _S390_STATFS_H
-#define _S390_STATFS_H
-
-#ifndef __s390x__
-#include <asm-generic/statfs.h>
-#else
-
-#ifndef __KERNEL_STRICT_NAMES
-
-#include <linux/types.h>
-
-typedef __kernel_fsid_t	fsid_t;
-
-#endif
-
-/*
- * This is ugly -- we're already 64-bit clean, so just duplicate the 
- * definitions.
- */
-struct statfs {
-	int  f_type;
-	int  f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	int  f_namelen;
-	int  f_frsize;
-	int  f_spare[5];
-};
-
-struct statfs64 {
-	int  f_type;
-	int  f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	int  f_namelen;
-	int  f_frsize;
-	int  f_spare[5];
-};
-
-struct compat_statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-};
-
-#endif /* __s390x__ */
-#endif
diff --git a/include/asm-s390/string.h b/include/asm-s390/string.h
deleted file mode 100644
index d074673a6d9b..000000000000
--- a/include/asm-s390/string.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- *  include/asm-s390/string.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- */
-
-#ifndef _S390_STRING_H_
-#define _S390_STRING_H_
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_TYPES_H
-#include <linux/types.h>
-#endif
-
-#define __HAVE_ARCH_MEMCHR	/* inline & arch function */
-#define __HAVE_ARCH_MEMCMP	/* arch function */
-#define __HAVE_ARCH_MEMCPY	/* gcc builtin & arch function */
-#define __HAVE_ARCH_MEMSCAN	/* inline & arch function */
-#define __HAVE_ARCH_MEMSET	/* gcc builtin & arch function */
-#define __HAVE_ARCH_STRCAT	/* inline & arch function */
-#define __HAVE_ARCH_STRCMP	/* arch function */
-#define __HAVE_ARCH_STRCPY	/* inline & arch function */
-#define __HAVE_ARCH_STRLCAT	/* arch function */
-#define __HAVE_ARCH_STRLCPY	/* arch function */
-#define __HAVE_ARCH_STRLEN	/* inline & arch function */
-#define __HAVE_ARCH_STRNCAT	/* arch function */
-#define __HAVE_ARCH_STRNCPY	/* arch function */
-#define __HAVE_ARCH_STRNLEN	/* inline & arch function */
-#define __HAVE_ARCH_STRRCHR	/* arch function */
-#define __HAVE_ARCH_STRSTR	/* arch function */
-
-/* Prototypes for non-inlined arch strings functions. */
-extern int memcmp(const void *, const void *, size_t);
-extern void *memcpy(void *, const void *, size_t);
-extern void *memset(void *, int, size_t);
-extern int strcmp(const char *,const char *);
-extern size_t strlcat(char *, const char *, size_t);
-extern size_t strlcpy(char *, const char *, size_t);
-extern char *strncat(char *, const char *, size_t);
-extern char *strncpy(char *, const char *, size_t);
-extern char *strrchr(const char *, int);
-extern char *strstr(const char *, const char *);
-
-#undef __HAVE_ARCH_MEMMOVE
-#undef __HAVE_ARCH_STRCHR
-#undef __HAVE_ARCH_STRNCHR
-#undef __HAVE_ARCH_STRNCMP
-#undef __HAVE_ARCH_STRNICMP
-#undef __HAVE_ARCH_STRPBRK
-#undef __HAVE_ARCH_STRSEP
-#undef __HAVE_ARCH_STRSPN
-
-#if !defined(IN_ARCH_STRING_C)
-
-static inline void *memchr(const void * s, int c, size_t n)
-{
-	register int r0 asm("0") = (char) c;
-	const void *ret = s + n;
-
-	asm volatile(
-		"0:	srst	%0,%1\n"
-		"	jo	0b\n"
-		"	jl	1f\n"
-		"	la	%0,0\n"
-		"1:"
-		: "+a" (ret), "+&a" (s) : "d" (r0) : "cc");
-	return (void *) ret;
-}
-
-static inline void *memscan(void *s, int c, size_t n)
-{
-	register int r0 asm("0") = (char) c;
-	const void *ret = s + n;
-
-	asm volatile(
-		"0:	srst	%0,%1\n"
-		"	jo	0b\n"
-		: "+a" (ret), "+&a" (s) : "d" (r0) : "cc");
-	return (void *) ret;
-}
-
-static inline char *strcat(char *dst, const char *src)
-{
-	register int r0 asm("0") = 0;
-	unsigned long dummy;
-	char *ret = dst;
-
-	asm volatile(
-		"0:	srst	%0,%1\n"
-		"	jo	0b\n"
-		"1:	mvst	%0,%2\n"
-		"	jo	1b"
-		: "=&a" (dummy), "+a" (dst), "+a" (src)
-		: "d" (r0), "0" (0) : "cc", "memory" );
-	return ret;
-}
-
-static inline char *strcpy(char *dst, const char *src)
-{
-	register int r0 asm("0") = 0;
-	char *ret = dst;
-
-	asm volatile(
-		"0:	mvst	%0,%1\n"
-		"	jo	0b"
-		: "+&a" (dst), "+&a" (src) : "d" (r0)
-		: "cc", "memory");
-	return ret;
-}
-
-static inline size_t strlen(const char *s)
-{
-	register unsigned long r0 asm("0") = 0;
-	const char *tmp = s;
-
-	asm volatile(
-		"0:	srst	%0,%1\n"
-		"	jo	0b"
-		: "+d" (r0), "+a" (tmp) :  : "cc");
-	return r0 - (unsigned long) s;
-}
-
-static inline size_t strnlen(const char * s, size_t n)
-{
-	register int r0 asm("0") = 0;
-	const char *tmp = s;
-	const char *end = s + n;
-
-	asm volatile(
-		"0:	srst	%0,%1\n"
-		"	jo	0b"
-		: "+a" (end), "+a" (tmp) : "d" (r0)  : "cc");
-	return end - s;
-}
-
-#endif /* !IN_ARCH_STRING_C */
-
-#endif /* __KERNEL__ */
-
-#endif /* __S390_STRING_H_ */
diff --git a/include/asm-s390/suspend.h b/include/asm-s390/suspend.h
deleted file mode 100644
index 1f34580e67a7..000000000000
--- a/include/asm-s390/suspend.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef __ASM_S390_SUSPEND_H
-#define __ASM_S390_SUSPEND_H
-
-#endif
-
diff --git a/include/asm-s390/sysinfo.h b/include/asm-s390/sysinfo.h
deleted file mode 100644
index 79d01343f8b0..000000000000
--- a/include/asm-s390/sysinfo.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * definition for store system information stsi
- *
- * Copyright IBM Corp. 2001,2008
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- *    Author(s): Ulrich Weigand <weigand@de.ibm.com>
- *		 Christian Borntraeger <borntraeger@de.ibm.com>
- */
-
-#ifndef __ASM_S390_SYSINFO_H
-#define __ASM_S390_SYSINFO_H
-
-struct sysinfo_1_1_1 {
-	char reserved_0[32];
-	char manufacturer[16];
-	char type[4];
-	char reserved_1[12];
-	char model_capacity[16];
-	char sequence[16];
-	char plant[4];
-	char model[16];
-	char model_perm_cap[16];
-	char model_temp_cap[16];
-	char model_cap_rating[4];
-	char model_perm_cap_rating[4];
-	char model_temp_cap_rating[4];
-};
-
-struct sysinfo_1_2_1 {
-	char reserved_0[80];
-	char sequence[16];
-	char plant[4];
-	char reserved_1[2];
-	unsigned short cpu_address;
-};
-
-struct sysinfo_1_2_2 {
-	char format;
-	char reserved_0[1];
-	unsigned short acc_offset;
-	char reserved_1[24];
-	unsigned int secondary_capability;
-	unsigned int capability;
-	unsigned short cpus_total;
-	unsigned short cpus_configured;
-	unsigned short cpus_standby;
-	unsigned short cpus_reserved;
-	unsigned short adjustment[0];
-};
-
-struct sysinfo_1_2_2_extension {
-	unsigned int alt_capability;
-	unsigned short alt_adjustment[0];
-};
-
-struct sysinfo_2_2_1 {
-	char reserved_0[80];
-	char sequence[16];
-	char plant[4];
-	unsigned short cpu_id;
-	unsigned short cpu_address;
-};
-
-struct sysinfo_2_2_2 {
-	char reserved_0[32];
-	unsigned short lpar_number;
-	char reserved_1;
-	unsigned char characteristics;
-	unsigned short cpus_total;
-	unsigned short cpus_configured;
-	unsigned short cpus_standby;
-	unsigned short cpus_reserved;
-	char name[8];
-	unsigned int caf;
-	char reserved_2[16];
-	unsigned short cpus_dedicated;
-	unsigned short cpus_shared;
-};
-
-#define LPAR_CHAR_DEDICATED	(1 << 7)
-#define LPAR_CHAR_SHARED	(1 << 6)
-#define LPAR_CHAR_LIMITED	(1 << 5)
-
-struct sysinfo_3_2_2 {
-	char reserved_0[31];
-	unsigned char count;
-	struct {
-		char reserved_0[4];
-		unsigned short cpus_total;
-		unsigned short cpus_configured;
-		unsigned short cpus_standby;
-		unsigned short cpus_reserved;
-		char name[8];
-		unsigned int caf;
-		char cpi[16];
-		char reserved_1[24];
-
-	} vm[8];
-};
-
-static inline int stsi(void *sysinfo, int fc, int sel1, int sel2)
-{
-	register int r0 asm("0") = (fc << 28) | sel1;
-	register int r1 asm("1") = sel2;
-
-	asm volatile(
-		"   stsi 0(%2)\n"
-		"0: jz   2f\n"
-		"1: lhi  %0,%3\n"
-		"2:\n"
-		EX_TABLE(0b, 1b)
-		: "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS)
-		: "cc", "memory");
-	return r0;
-}
-
-#endif /* __ASM_S390_SYSINFO_H */
diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h
deleted file mode 100644
index 819e7d99ca0c..000000000000
--- a/include/asm-s390/system.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- *  include/asm-s390/system.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *
- *  Derived from "include/asm-i386/system.h"
- */
-
-#ifndef __ASM_SYSTEM_H
-#define __ASM_SYSTEM_H
-
-#include <linux/kernel.h>
-#include <asm/types.h>
-#include <asm/ptrace.h>
-#include <asm/setup.h>
-#include <asm/processor.h>
-#include <asm/lowcore.h>
-
-#ifdef __KERNEL__
-
-struct task_struct;
-
-extern struct task_struct *__switch_to(void *, void *);
-
-static inline void save_fp_regs(s390_fp_regs *fpregs)
-{
-	asm volatile(
-		"	std	0,8(%1)\n"
-		"	std	2,24(%1)\n"
-		"	std	4,40(%1)\n"
-		"	std	6,56(%1)"
-		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
-	if (!MACHINE_HAS_IEEE)
-		return;
-	asm volatile(
-		"	stfpc	0(%1)\n"
-		"	std	1,16(%1)\n"
-		"	std	3,32(%1)\n"
-		"	std	5,48(%1)\n"
-		"	std	7,64(%1)\n"
-		"	std	8,72(%1)\n"
-		"	std	9,80(%1)\n"
-		"	std	10,88(%1)\n"
-		"	std	11,96(%1)\n"
-		"	std	12,104(%1)\n"
-		"	std	13,112(%1)\n"
-		"	std	14,120(%1)\n"
-		"	std	15,128(%1)\n"
-		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
-}
-
-static inline void restore_fp_regs(s390_fp_regs *fpregs)
-{
-	asm volatile(
-		"	ld	0,8(%0)\n"
-		"	ld	2,24(%0)\n"
-		"	ld	4,40(%0)\n"
-		"	ld	6,56(%0)"
-		: : "a" (fpregs), "m" (*fpregs));
-	if (!MACHINE_HAS_IEEE)
-		return;
-	asm volatile(
-		"	lfpc	0(%0)\n"
-		"	ld	1,16(%0)\n"
-		"	ld	3,32(%0)\n"
-		"	ld	5,48(%0)\n"
-		"	ld	7,64(%0)\n"
-		"	ld	8,72(%0)\n"
-		"	ld	9,80(%0)\n"
-		"	ld	10,88(%0)\n"
-		"	ld	11,96(%0)\n"
-		"	ld	12,104(%0)\n"
-		"	ld	13,112(%0)\n"
-		"	ld	14,120(%0)\n"
-		"	ld	15,128(%0)\n"
-		: : "a" (fpregs), "m" (*fpregs));
-}
-
-static inline void save_access_regs(unsigned int *acrs)
-{
-	asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory");
-}
-
-static inline void restore_access_regs(unsigned int *acrs)
-{
-	asm volatile("lam 0,15,0(%0)" : : "a" (acrs));
-}
-
-#define switch_to(prev,next,last) do {					     \
-	if (prev == next)						     \
-		break;							     \
-	save_fp_regs(&prev->thread.fp_regs);				     \
-	restore_fp_regs(&next->thread.fp_regs);				     \
-	save_access_regs(&prev->thread.acrs[0]);			     \
-	restore_access_regs(&next->thread.acrs[0]);			     \
-	prev = __switch_to(prev,next);					     \
-} while (0)
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void account_vtime(struct task_struct *);
-extern void account_tick_vtime(struct task_struct *);
-extern void account_system_vtime(struct task_struct *);
-#else
-#define account_vtime(x) do { /* empty */ } while (0)
-#endif
-
-#ifdef CONFIG_PFAULT
-extern void pfault_irq_init(void);
-extern int pfault_init(void);
-extern void pfault_fini(void);
-#else /* CONFIG_PFAULT */
-#define pfault_irq_init()	do { } while (0)
-#define pfault_init()		({-1;})
-#define pfault_fini()		do { } while (0)
-#endif /* CONFIG_PFAULT */
-
-#ifdef CONFIG_PAGE_STATES
-extern void cmma_init(void);
-#else
-static inline void cmma_init(void) { }
-#endif
-
-#define finish_arch_switch(prev) do {					     \
-	set_fs(current->thread.mm_segment);				     \
-	account_vtime(prev);						     \
-} while (0)
-
-#define nop() asm volatile("nop")
-
-#define xchg(ptr,x)							  \
-({									  \
-	__typeof__(*(ptr)) __ret;					  \
-	__ret = (__typeof__(*(ptr)))					  \
-		__xchg((unsigned long)(x), (void *)(ptr),sizeof(*(ptr))); \
-	__ret;								  \
-})
-
-extern void __xchg_called_with_bad_pointer(void);
-
-static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
-{
-	unsigned long addr, old;
-	int shift;
-
-        switch (size) {
-	case 1:
-		addr = (unsigned long) ptr;
-		shift = (3 ^ (addr & 3)) << 3;
-		addr ^= addr & 3;
-		asm volatile(
-			"	l	%0,0(%4)\n"
-			"0:	lr	0,%0\n"
-			"	nr	0,%3\n"
-			"	or	0,%2\n"
-			"	cs	%0,0,0(%4)\n"
-			"	jl	0b\n"
-			: "=&d" (old), "=m" (*(int *) addr)
-			: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
-			  "m" (*(int *) addr) : "memory", "cc", "0");
-		return old >> shift;
-	case 2:
-		addr = (unsigned long) ptr;
-		shift = (2 ^ (addr & 2)) << 3;
-		addr ^= addr & 2;
-		asm volatile(
-			"	l	%0,0(%4)\n"
-			"0:	lr	0,%0\n"
-			"	nr	0,%3\n"
-			"	or	0,%2\n"
-			"	cs	%0,0,0(%4)\n"
-			"	jl	0b\n"
-			: "=&d" (old), "=m" (*(int *) addr)
-			: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
-			  "m" (*(int *) addr) : "memory", "cc", "0");
-		return old >> shift;
-	case 4:
-		asm volatile(
-			"	l	%0,0(%3)\n"
-			"0:	cs	%0,%2,0(%3)\n"
-			"	jl	0b\n"
-			: "=&d" (old), "=m" (*(int *) ptr)
-			: "d" (x), "a" (ptr), "m" (*(int *) ptr)
-			: "memory", "cc");
-		return old;
-#ifdef __s390x__
-	case 8:
-		asm volatile(
-			"	lg	%0,0(%3)\n"
-			"0:	csg	%0,%2,0(%3)\n"
-			"	jl	0b\n"
-			: "=&d" (old), "=m" (*(long *) ptr)
-			: "d" (x), "a" (ptr), "m" (*(long *) ptr)
-			: "memory", "cc");
-		return old;
-#endif /* __s390x__ */
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-#define cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
-					(unsigned long)(n), sizeof(*(ptr))))
-
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
-{
-	unsigned long addr, prev, tmp;
-	int shift;
-
-        switch (size) {
-	case 1:
-		addr = (unsigned long) ptr;
-		shift = (3 ^ (addr & 3)) << 3;
-		addr ^= addr & 3;
-		asm volatile(
-			"	l	%0,0(%4)\n"
-			"0:	nr	%0,%5\n"
-			"	lr	%1,%0\n"
-			"	or	%0,%2\n"
-			"	or	%1,%3\n"
-			"	cs	%0,%1,0(%4)\n"
-			"	jnl	1f\n"
-			"	xr	%1,%0\n"
-			"	nr	%1,%5\n"
-			"	jnz	0b\n"
-			"1:"
-			: "=&d" (prev), "=&d" (tmp)
-			: "d" (old << shift), "d" (new << shift), "a" (ptr),
-			  "d" (~(255 << shift))
-			: "memory", "cc");
-		return prev >> shift;
-	case 2:
-		addr = (unsigned long) ptr;
-		shift = (2 ^ (addr & 2)) << 3;
-		addr ^= addr & 2;
-		asm volatile(
-			"	l	%0,0(%4)\n"
-			"0:	nr	%0,%5\n"
-			"	lr	%1,%0\n"
-			"	or	%0,%2\n"
-			"	or	%1,%3\n"
-			"	cs	%0,%1,0(%4)\n"
-			"	jnl	1f\n"
-			"	xr	%1,%0\n"
-			"	nr	%1,%5\n"
-			"	jnz	0b\n"
-			"1:"
-			: "=&d" (prev), "=&d" (tmp)
-			: "d" (old << shift), "d" (new << shift), "a" (ptr),
-			  "d" (~(65535 << shift))
-			: "memory", "cc");
-		return prev >> shift;
-	case 4:
-		asm volatile(
-			"	cs	%0,%2,0(%3)\n"
-			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
-			: "memory", "cc");
-		return prev;
-#ifdef __s390x__
-	case 8:
-		asm volatile(
-			"	csg	%0,%2,0(%3)\n"
-			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
-			: "memory", "cc");
-		return prev;
-#endif /* __s390x__ */
-        }
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- *
- * This is very similar to the ppc eieio/sync instruction in that is
- * does a checkpoint syncronisation & makes sure that 
- * all memory ops have completed wrt other CPU's ( see 7-15 POP  DJB ).
- */
-
-#define eieio()	asm volatile("bcr 15,0" : : : "memory")
-#define SYNC_OTHER_CORES(x)   eieio()
-#define mb()    eieio()
-#define rmb()   eieio()
-#define wmb()   eieio()
-#define read_barrier_depends() do { } while(0)
-#define smp_mb()       mb()
-#define smp_rmb()      rmb()
-#define smp_wmb()      wmb()
-#define smp_read_barrier_depends()    read_barrier_depends()
-#define smp_mb__before_clear_bit()     smp_mb()
-#define smp_mb__after_clear_bit()      smp_mb()
-
-
-#define set_mb(var, value)      do { var = value; mb(); } while (0)
-
-#ifdef __s390x__
-
-#define __ctl_load(array, low, high) ({				\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	lctlg	%1,%2,0(%0)\n"			\
-		: : "a" (&array), "i" (low), "i" (high),	\
-		    "m" (*(addrtype *)(&array)));		\
-	})
-
-#define __ctl_store(array, low, high) ({			\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	stctg	%2,%3,0(%1)\n"			\
-		: "=m" (*(addrtype *)(&array))			\
-		: "a" (&array), "i" (low), "i" (high));		\
-	})
-
-#else /* __s390x__ */
-
-#define __ctl_load(array, low, high) ({				\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	lctl	%1,%2,0(%0)\n"			\
-		: : "a" (&array), "i" (low), "i" (high),	\
-		    "m" (*(addrtype *)(&array)));		\
-})
-
-#define __ctl_store(array, low, high) ({			\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	stctl	%2,%3,0(%1)\n"			\
-		: "=m" (*(addrtype *)(&array))			\
-		: "a" (&array), "i" (low), "i" (high));		\
-	})
-
-#endif /* __s390x__ */
-
-#define __ctl_set_bit(cr, bit) ({	\
-	unsigned long __dummy;		\
-	__ctl_store(__dummy, cr, cr);	\
-	__dummy |= 1UL << (bit);	\
-	__ctl_load(__dummy, cr, cr);	\
-})
-
-#define __ctl_clear_bit(cr, bit) ({	\
-	unsigned long __dummy;		\
-	__ctl_store(__dummy, cr, cr);	\
-	__dummy &= ~(1UL << (bit));	\
-	__ctl_load(__dummy, cr, cr);	\
-})
-
-#include <linux/irqflags.h>
-
-#include <asm-generic/cmpxchg-local.h>
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-				      unsigned long old,
-				      unsigned long new, int size)
-{
-	switch (size) {
-	case 1:
-	case 2:
-	case 4:
-#ifdef __s390x__
-	case 8:
-#endif
-		return __cmpxchg(ptr, old, new, size);
-	default:
-		return __cmpxchg_local_generic(ptr, old, new, size);
-	}
-
-	return old;
-}
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-			(unsigned long)(n), sizeof(*(ptr))))
-#ifdef __s390x__
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-#else
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-#endif
-
-/*
- * Use to set psw mask except for the first byte which
- * won't be changed by this function.
- */
-static inline void
-__set_psw_mask(unsigned long mask)
-{
-	__load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8)));
-}
-
-#define local_mcck_enable()  __set_psw_mask(psw_kernel_bits)
-#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK)
-
-int stfle(unsigned long long *list, int doublewords);
-
-#ifdef CONFIG_SMP
-
-extern void smp_ctl_set_bit(int cr, int bit);
-extern void smp_ctl_clear_bit(int cr, int bit);
-#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
-#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
-
-#else
-
-#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
-#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
-
-#endif /* CONFIG_SMP */
-
-static inline unsigned int stfl(void)
-{
-	asm volatile(
-		"	.insn	s,0xb2b10000,0(0)\n" /* stfl */
-		"0:\n"
-		EX_TABLE(0b,0b));
-	return S390_lowcore.stfl_fac_list;
-}
-
-static inline unsigned short stap(void)
-{
-	unsigned short cpu_address;
-
-	asm volatile("stap %0" : "=m" (cpu_address));
-	return cpu_address;
-}
-
-extern void (*_machine_restart)(char *command);
-extern void (*_machine_halt)(void);
-extern void (*_machine_power_off)(void);
-
-#define arch_align_stack(x) (x)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-extern psw_t sysc_restore_trace_psw;
-extern psw_t io_restore_trace_psw;
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-s390/tape390.h b/include/asm-s390/tape390.h
deleted file mode 100644
index 884fba48f1ff..000000000000
--- a/include/asm-s390/tape390.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*************************************************************************
- *
- * tape390.h
- *	   enables user programs to display messages and control encryption
- *	   on s390 tape devices
- *
- *	   Copyright IBM Corp. 2001,2006
- *	   Author(s): Michael Holzheu <holzheu@de.ibm.com>
- *
- *************************************************************************/
-
-#ifndef _TAPE390_H
-#define _TAPE390_H
-
-#define TAPE390_DISPLAY _IOW('d', 1, struct display_struct)
-
-/*
- * The TAPE390_DISPLAY ioctl calls the Load Display command
- * which transfers 17 bytes of data from the channel to the subsystem:
- *     - 1 format control byte, and
- *     - two 8-byte messages
- *
- * Format control byte:
- *   0-2: New Message Overlay
- *     3: Alternate Messages
- *     4: Blink Message
- *     5: Display Low/High Message
- *     6: Reserved
- *     7: Automatic Load Request
- *
- */
-
-typedef struct display_struct {
-        char cntrl;
-        char message1[8];
-        char message2[8];
-} display_struct;
-
-/*
- * Tape encryption support
- */
-
-struct tape390_crypt_info {
-	char capability;
-	char status;
-	char medium_status;
-} __attribute__ ((packed));
-
-
-/* Macros for "capable" field */
-#define TAPE390_CRYPT_SUPPORTED_MASK 0x01
-#define TAPE390_CRYPT_SUPPORTED(x) \
-	((x.capability & TAPE390_CRYPT_SUPPORTED_MASK))
-
-/* Macros for "status" field */
-#define TAPE390_CRYPT_ON_MASK 0x01
-#define TAPE390_CRYPT_ON(x) (((x.status) & TAPE390_CRYPT_ON_MASK))
-
-/* Macros for "medium status" field */
-#define TAPE390_MEDIUM_LOADED_MASK 0x01
-#define TAPE390_MEDIUM_ENCRYPTED_MASK 0x02
-#define TAPE390_MEDIUM_ENCRYPTED(x) \
-	(((x.medium_status) & TAPE390_MEDIUM_ENCRYPTED_MASK))
-#define TAPE390_MEDIUM_LOADED(x) \
-	(((x.medium_status) & TAPE390_MEDIUM_LOADED_MASK))
-
-/*
- * The TAPE390_CRYPT_SET ioctl is used to switch on/off encryption.
- * The "encryption_capable" and "tape_status" fields are ignored for this ioctl!
- */
-#define TAPE390_CRYPT_SET _IOW('d', 2, struct tape390_crypt_info)
-
-/*
- * The TAPE390_CRYPT_QUERY ioctl is used to query the encryption state.
- */
-#define TAPE390_CRYPT_QUERY _IOR('d', 3, struct tape390_crypt_info)
-
-/* Values for "kekl1/2_type" and "kekl1/2_type_on_tape" fields */
-#define TAPE390_KEKL_TYPE_NONE 0
-#define TAPE390_KEKL_TYPE_LABEL 1
-#define TAPE390_KEKL_TYPE_HASH 2
-
-struct tape390_kekl {
-	unsigned char type;
-	unsigned char type_on_tape;
-	char label[65];
-} __attribute__ ((packed));
-
-struct tape390_kekl_pair {
-	struct tape390_kekl kekl[2];
-} __attribute__ ((packed));
-
-/*
- * The TAPE390_KEKL_SET ioctl is used to set Key Encrypting Key labels.
- */
-#define TAPE390_KEKL_SET _IOW('d', 4, struct tape390_kekl_pair)
-
-/*
- * The TAPE390_KEKL_QUERY ioctl is used to query Key Encrypting Key labels.
- */
-#define TAPE390_KEKL_QUERY _IOR('d', 5, struct tape390_kekl_pair)
-
-#endif 
diff --git a/include/asm-s390/termbits.h b/include/asm-s390/termbits.h
deleted file mode 100644
index 58731853d529..000000000000
--- a/include/asm-s390/termbits.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  include/asm-s390/termbits.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/termbits.h"
- */
-
-#ifndef __ARCH_S390_TERMBITS_H__
-#define __ARCH_S390_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define  BOTHER  0010000
-#define  B57600  0010001
-#define  B115200 0010002
-#define  B230400 0010003
-#define  B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif
diff --git a/include/asm-s390/termios.h b/include/asm-s390/termios.h
deleted file mode 100644
index 67f66278f533..000000000000
--- a/include/asm-s390/termios.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  include/asm-s390/termios.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/termios.h"
- */
-
-#ifndef _S390_TERMIOS_H
-#define _S390_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-
-#include <asm-generic/termios.h>
-
-#endif	/* __KERNEL__ */
-
-#endif	/* _S390_TERMIOS_H */
diff --git a/include/asm-s390/thread_info.h b/include/asm-s390/thread_info.h
deleted file mode 100644
index 99bbed99a3b2..000000000000
--- a/include/asm-s390/thread_info.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  include/asm-s390/thread_info.h
- *
- *  S390 version
- *    Copyright (C) IBM Corp. 2002,2006
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-/*
- * Size of kernel stack for each process
- */
-#ifndef __s390x__
-#ifndef __SMALL_STACK
-#define THREAD_ORDER 1
-#define ASYNC_ORDER  1
-#else
-#define THREAD_ORDER 0
-#define ASYNC_ORDER  0
-#endif
-#else /* __s390x__ */
-#ifndef __SMALL_STACK
-#define THREAD_ORDER 2
-#define ASYNC_ORDER  2
-#else
-#define THREAD_ORDER 1
-#define ASYNC_ORDER  1
-#endif
-#endif /* __s390x__ */
-
-#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
-#define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <asm/lowcore.h>
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
- */
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	unsigned int		cpu;		/* current CPU */
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
-	struct restart_block	restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.preempt_count	= 1,			\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
-}
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-	__get_free_pages(GFP_KERNEL,THREAD_ORDER))
-#define free_thread_info(ti) free_pages((unsigned long) (ti),THREAD_ORDER)
-
-#endif
-
-/*
- * thread information flags bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_RESTART_SVC		4	/* restart svc with new svc number */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
-#define TIF_MCCK_PENDING	7	/* machine check handling is pending */
-#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
-					   TIF_NEED_RESCHED */
-#define TIF_31BIT		18	/* 32bit process */ 
-#define TIF_MEMDIE		19
-#define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
-#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
-#define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_31BIT		(1<<TIF_31BIT)
-
-#endif /* __KERNEL__ */
-
-#define PREEMPT_ACTIVE		0x4000000
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-s390/timer.h b/include/asm-s390/timer.h
deleted file mode 100644
index d98d79e35cd6..000000000000
--- a/include/asm-s390/timer.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  include/asm-s390/timer.h
- *
- *  (C) Copyright IBM Corp. 2003,2006
- *  Virtual CPU timer
- *
- *  Author: Jan Glauber (jang@de.ibm.com)
- */
-
-#ifndef _ASM_S390_TIMER_H
-#define _ASM_S390_TIMER_H
-
-#ifdef __KERNEL__
-
-#include <linux/timer.h>
-
-#define VTIMER_MAX_SLICE (0x7ffffffffffff000LL)
-
-struct vtimer_list {
-	struct list_head entry;
-
-	int cpu;
-	__u64 expires;
-	__u64 interval;
-
-	spinlock_t lock;
-	unsigned long magic;
-
-	void (*function)(unsigned long);
-	unsigned long data;
-};
-
-/* the offset value will wrap after ca. 71 years */
-struct vtimer_queue {
-	struct list_head list;
-	spinlock_t lock;
-	__u64 to_expire;	  /* current event expire time */
-	__u64 offset;		  /* list offset to zero */
-	__u64 idle;		  /* temp var for idle */
-};
-
-extern void init_virt_timer(struct vtimer_list *timer);
-extern void add_virt_timer(void *new);
-extern void add_virt_timer_periodic(void *new);
-extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
-extern int del_virt_timer(struct vtimer_list *timer);
-
-extern void init_cpu_vtimer(void);
-extern void vtime_init(void);
-
-#ifdef CONFIG_VIRT_TIMER
-
-extern void vtime_start_cpu_timer(void);
-extern void vtime_stop_cpu_timer(void);
-
-#else
-
-static inline void vtime_start_cpu_timer(void) { }
-static inline void vtime_stop_cpu_timer(void) { }
-
-#endif /* CONFIG_VIRT_TIMER */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_S390_TIMER_H */
diff --git a/include/asm-s390/timex.h b/include/asm-s390/timex.h
deleted file mode 100644
index d744c3d62de5..000000000000
--- a/include/asm-s390/timex.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  include/asm-s390/timex.h
- *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *
- *  Derived from "include/asm-i386/timex.h"
- *    Copyright (C) 1992, Linus Torvalds
- */
-
-#ifndef _ASM_S390_TIMEX_H
-#define _ASM_S390_TIMEX_H
-
-/* Inline functions for clock register access. */
-static inline int set_clock(__u64 time)
-{
-	int cc;
-
-	asm volatile(
-		"   sck   0(%2)\n"
-		"   ipm   %0\n"
-		"   srl   %0,28\n"
-		: "=d" (cc) : "m" (time), "a" (&time) : "cc");
-	return cc;
-}
-
-static inline int store_clock(__u64 *time)
-{
-	int cc;
-
-	asm volatile(
-		"   stck  0(%2)\n"
-		"   ipm   %0\n"
-		"   srl   %0,28\n"
-		: "=d" (cc), "=m" (*time) : "a" (time) : "cc");
-	return cc;
-}
-
-static inline void set_clock_comparator(__u64 time)
-{
-	asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time));
-}
-
-static inline void store_clock_comparator(__u64 *time)
-{
-	asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time));
-}
-
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-
-typedef unsigned long long cycles_t;
-
-static inline unsigned long long get_clock (void)
-{
-	unsigned long long clk;
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-	asm volatile("stck %0" : "=Q" (clk) : : "cc");
-#else /* __GNUC__ */
-	asm volatile("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
-#endif /* __GNUC__ */
-	return clk;
-}
-
-static inline unsigned long long get_clock_xt(void)
-{
-	unsigned char clk[16];
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-	asm volatile("stcke %0" : "=Q" (clk) : : "cc");
-#else /* __GNUC__ */
-	asm volatile("stcke 0(%1)" : "=m" (clk)
-				   : "a" (clk) : "cc");
-#endif /* __GNUC__ */
-
-	return *((unsigned long long *)&clk[1]);
-}
-
-static inline cycles_t get_cycles(void)
-{
-	return (cycles_t) get_clock() >> 2;
-}
-
-int get_sync_clock(unsigned long long *clock);
-void init_cpu_timer(void);
-unsigned long long monotonic_clock(void);
-
-#endif
diff --git a/include/asm-s390/tlb.h b/include/asm-s390/tlb.h
deleted file mode 100644
index 3d8a96d39d9d..000000000000
--- a/include/asm-s390/tlb.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef _S390_TLB_H
-#define _S390_TLB_H
-
-/*
- * TLB flushing on s390 is complicated. The following requirement
- * from the principles of operation is the most arduous:
- *
- * "A valid table entry must not be changed while it is attached
- * to any CPU and may be used for translation by that CPU except to
- * (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY,
- * or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page
- * table entry, or (3) make a change by means of a COMPARE AND SWAP
- * AND PURGE instruction that purges the TLB."
- *
- * The modification of a pte of an active mm struct therefore is
- * a two step process: i) invalidate the pte, ii) store the new pte.
- * This is true for the page protection bit as well.
- * The only possible optimization is to flush at the beginning of
- * a tlb_gather_mmu cycle if the mm_struct is currently not in use.
- *
- * Pages used for the page tables is a different story. FIXME: more
- */
-
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <asm/processor.h>
-#include <asm/pgalloc.h>
-#include <asm/smp.h>
-#include <asm/tlbflush.h>
-
-#ifndef CONFIG_SMP
-#define TLB_NR_PTRS	1
-#else
-#define TLB_NR_PTRS	508
-#endif
-
-struct mmu_gather {
-	struct mm_struct *mm;
-	unsigned int fullmm;
-	unsigned int nr_ptes;
-	unsigned int nr_pxds;
-	void *array[TLB_NR_PTRS];
-};
-
-DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm,
-						unsigned int full_mm_flush)
-{
-	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
-
-	tlb->mm = mm;
-	tlb->fullmm = full_mm_flush || (num_online_cpus() == 1) ||
-		(atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm);
-	tlb->nr_ptes = 0;
-	tlb->nr_pxds = TLB_NR_PTRS;
-	if (tlb->fullmm)
-		__tlb_flush_mm(mm);
-	return tlb;
-}
-
-static inline void tlb_flush_mmu(struct mmu_gather *tlb,
-				 unsigned long start, unsigned long end)
-{
-	if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < TLB_NR_PTRS))
-		__tlb_flush_mm(tlb->mm);
-	while (tlb->nr_ptes > 0)
-		pte_free(tlb->mm, tlb->array[--tlb->nr_ptes]);
-	while (tlb->nr_pxds < TLB_NR_PTRS)
-		/* pgd_free frees the pointer as region or segment table */
-		pgd_free(tlb->mm, tlb->array[tlb->nr_pxds++]);
-}
-
-static inline void tlb_finish_mmu(struct mmu_gather *tlb,
-				  unsigned long start, unsigned long end)
-{
-	tlb_flush_mmu(tlb, start, end);
-
-	/* keep the page table cache within bounds */
-	check_pgt_cache();
-
-	put_cpu_var(mmu_gathers);
-}
-
-/*
- * Release the page cache reference for a pte removed by
- * tlb_ptep_clear_flush. In both flush modes the tlb fo a page cache page
- * has already been freed, so just do free_page_and_swap_cache.
- */
-static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
-{
-	free_page_and_swap_cache(page);
-}
-
-/*
- * pte_free_tlb frees a pte table and clears the CRSTE for the
- * page table from the tlb.
- */
-static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
-{
-	if (!tlb->fullmm) {
-		tlb->array[tlb->nr_ptes++] = pte;
-		if (tlb->nr_ptes >= tlb->nr_pxds)
-			tlb_flush_mmu(tlb, 0, 0);
-	} else
-		pte_free(tlb->mm, pte);
-}
-
-/*
- * pmd_free_tlb frees a pmd table and clears the CRSTE for the
- * segment table entry from the tlb.
- * If the mm uses a two level page table the single pmd is freed
- * as the pgd. pmd_free_tlb checks the asce_limit against 2GB
- * to avoid the double free of the pmd in this case.
- */
-static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
-{
-#ifdef __s390x__
-	if (tlb->mm->context.asce_limit <= (1UL << 31))
-		return;
-	if (!tlb->fullmm) {
-		tlb->array[--tlb->nr_pxds] = pmd;
-		if (tlb->nr_ptes >= tlb->nr_pxds)
-			tlb_flush_mmu(tlb, 0, 0);
-	} else
-		pmd_free(tlb->mm, pmd);
-#endif
-}
-
-/*
- * pud_free_tlb frees a pud table and clears the CRSTE for the
- * region third table entry from the tlb.
- * If the mm uses a three level page table the single pud is freed
- * as the pgd. pud_free_tlb checks the asce_limit against 4TB
- * to avoid the double free of the pud in this case.
- */
-static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
-{
-#ifdef __s390x__
-	if (tlb->mm->context.asce_limit <= (1UL << 42))
-		return;
-	if (!tlb->fullmm) {
-		tlb->array[--tlb->nr_pxds] = pud;
-		if (tlb->nr_ptes >= tlb->nr_pxds)
-			tlb_flush_mmu(tlb, 0, 0);
-	} else
-		pud_free(tlb->mm, pud);
-#endif
-}
-
-#define tlb_start_vma(tlb, vma)			do { } while (0)
-#define tlb_end_vma(tlb, vma)			do { } while (0)
-#define tlb_remove_tlb_entry(tlb, ptep, addr)	do { } while (0)
-#define tlb_migrate_finish(mm)			do { } while (0)
-
-#endif /* _S390_TLB_H */
diff --git a/include/asm-s390/tlbflush.h b/include/asm-s390/tlbflush.h
deleted file mode 100644
index d60394b9745e..000000000000
--- a/include/asm-s390/tlbflush.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef _S390_TLBFLUSH_H
-#define _S390_TLBFLUSH_H
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <asm/processor.h>
-#include <asm/pgalloc.h>
-
-/*
- * Flush all tlb entries on the local cpu.
- */
-static inline void __tlb_flush_local(void)
-{
-	asm volatile("ptlb" : : : "memory");
-}
-
-#ifdef CONFIG_SMP
-/*
- * Flush all tlb entries on all cpus.
- */
-void smp_ptlb_all(void);
-
-static inline void __tlb_flush_global(void)
-{
-	register unsigned long reg2 asm("2");
-	register unsigned long reg3 asm("3");
-	register unsigned long reg4 asm("4");
-	long dummy;
-
-#ifndef __s390x__
-	if (!MACHINE_HAS_CSP) {
-		smp_ptlb_all();
-		return;
-	}
-#endif /* __s390x__ */
-
-	dummy = 0;
-	reg2 = reg3 = 0;
-	reg4 = ((unsigned long) &dummy) + 1;
-	asm volatile(
-		"	csp	%0,%2"
-		: : "d" (reg2), "d" (reg3), "d" (reg4), "m" (dummy) : "cc" );
-}
-
-static inline void __tlb_flush_full(struct mm_struct *mm)
-{
-	cpumask_t local_cpumask;
-
-	preempt_disable();
-	/*
-	 * If the process only ran on the local cpu, do a local flush.
-	 */
-	local_cpumask = cpumask_of_cpu(smp_processor_id());
-	if (cpus_equal(mm->cpu_vm_mask, local_cpumask))
-		__tlb_flush_local();
-	else
-		__tlb_flush_global();
-	preempt_enable();
-}
-#else
-#define __tlb_flush_full(mm)	__tlb_flush_local()
-#endif
-
-/*
- * Flush all tlb entries of a page table on all cpus.
- */
-static inline void __tlb_flush_idte(unsigned long asce)
-{
-	asm volatile(
-		"	.insn	rrf,0xb98e0000,0,%0,%1,0"
-		: : "a" (2048), "a" (asce) : "cc" );
-}
-
-static inline void __tlb_flush_mm(struct mm_struct * mm)
-{
-	if (unlikely(cpus_empty(mm->cpu_vm_mask)))
-		return;
-	/*
-	 * If the machine has IDTE we prefer to do a per mm flush
-	 * on all cpus instead of doing a local flush if the mm
-	 * only ran on the local cpu.
-	 */
-	if (MACHINE_HAS_IDTE) {
-		if (mm->context.noexec)
-			__tlb_flush_idte((unsigned long)
-					 get_shadow_table(mm->pgd) |
-					 mm->context.asce_bits);
-		__tlb_flush_idte((unsigned long) mm->pgd |
-				 mm->context.asce_bits);
-		return;
-	}
-	__tlb_flush_full(mm);
-}
-
-static inline void __tlb_flush_mm_cond(struct mm_struct * mm)
-{
-	if (atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm)
-		__tlb_flush_mm(mm);
-}
-
-/*
- * TLB flushing:
- *  flush_tlb() - flushes the current mm struct TLBs
- *  flush_tlb_all() - flushes all processes TLBs
- *  flush_tlb_mm(mm) - flushes the specified mm context TLB's
- *  flush_tlb_page(vma, vmaddr) - flushes one page
- *  flush_tlb_range(vma, start, end) - flushes a range of pages
- *  flush_tlb_kernel_range(start, end) - flushes a range of kernel pages
- */
-
-/*
- * flush_tlb_mm goes together with ptep_set_wrprotect for the
- * copy_page_range operation and flush_tlb_range is related to
- * ptep_get_and_clear for change_protection. ptep_set_wrprotect and
- * ptep_get_and_clear do not flush the TLBs directly if the mm has
- * only one user. At the end of the update the flush_tlb_mm and
- * flush_tlb_range functions need to do the flush.
- */
-#define flush_tlb()				do { } while (0)
-#define flush_tlb_all()				do { } while (0)
-#define flush_tlb_page(vma, addr)		do { } while (0)
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	__tlb_flush_mm_cond(mm);
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	__tlb_flush_mm_cond(vma->vm_mm);
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-	__tlb_flush_mm(&init_mm);
-}
-
-#endif /* _S390_TLBFLUSH_H */
diff --git a/include/asm-s390/todclk.h b/include/asm-s390/todclk.h
deleted file mode 100644
index c7f62055488a..000000000000
--- a/include/asm-s390/todclk.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * File...........: linux/include/asm/todclk.h
- * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
- * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
- * History of changes (starts July 2000)
- */
-
-#ifndef __ASM_TODCLK_H
-#define __ASM_TODCLK_H
-
-#ifdef __KERNEL__
-
-#define TOD_uSEC (0x1000ULL)
-#define TOD_mSEC (1000 * TOD_uSEC)
-#define TOD_SEC (1000 * TOD_mSEC)
-#define TOD_MIN (60 * TOD_SEC)
-#define TOD_HOUR (60 * TOD_MIN)
-
-#endif
-
-#endif
diff --git a/include/asm-s390/topology.h b/include/asm-s390/topology.h
deleted file mode 100644
index d96c91643458..000000000000
--- a/include/asm-s390/topology.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _ASM_S390_TOPOLOGY_H
-#define _ASM_S390_TOPOLOGY_H
-
-#include <linux/cpumask.h>
-
-#define mc_capable()	(1)
-
-cpumask_t cpu_coregroup_map(unsigned int cpu);
-
-extern cpumask_t cpu_core_map[NR_CPUS];
-
-#define topology_core_siblings(cpu)	(cpu_core_map[cpu])
-
-int topology_set_cpu_management(int fc);
-void topology_schedule_update(void);
-
-#define POLARIZATION_UNKNWN	(-1)
-#define POLARIZATION_HRZ	(0)
-#define POLARIZATION_VL		(1)
-#define POLARIZATION_VM		(2)
-#define POLARIZATION_VH		(3)
-
-#ifdef CONFIG_SMP
-void s390_init_cpu_topology(void);
-#else
-static inline void s390_init_cpu_topology(void)
-{
-};
-#endif
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_S390_TOPOLOGY_H */
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
deleted file mode 100644
index 41c547656130..000000000000
--- a/include/asm-s390/types.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  include/asm-s390/types.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/types.h"
- */
-
-#ifndef _S390_TYPES_H
-#define _S390_TYPES_H
-
-#ifndef __s390x__
-# include <asm-generic/int-ll64.h>
-#else
-# include <asm-generic/int-l64.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/* A address type so that arithmetic can be done on it & it can be upgraded to
-   64 bit when necessary 
-*/
-typedef unsigned long addr_t; 
-typedef __signed__ long saddr_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#ifndef __s390x__
-#define BITS_PER_LONG 32
-#else
-#define BITS_PER_LONG 64
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef u64 dma64_addr_t;
-#ifdef __s390x__
-/* DMA addresses come in 32-bit and 64-bit flavours. */
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif
-
-#ifndef __s390x__
-typedef union {
-	unsigned long long pair;
-	struct {
-		unsigned long even;
-		unsigned long odd;
-	} subreg;
-} register_pair;
-
-#endif /* ! __s390x__   */
-#endif /* __ASSEMBLY__  */
-#endif /* __KERNEL__    */
-#endif /* _S390_TYPES_H */
diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h
deleted file mode 100644
index 0235970278f0..000000000000
--- a/include/asm-s390/uaccess.h
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- *  include/asm-s390/uaccess.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Derived from "include/asm-i386/uaccess.h"
- */
-#ifndef __S390_UACCESS_H
-#define __S390_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/errno.h>
-
-#define VERIFY_READ     0
-#define VERIFY_WRITE    1
-
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(a)  ((mm_segment_t) { (a) })
-
-
-#define KERNEL_DS       MAKE_MM_SEG(0)
-#define USER_DS         MAKE_MM_SEG(1)
-
-#define get_ds()        (KERNEL_DS)
-#define get_fs()        (current->thread.mm_segment)
-
-#define set_fs(x) \
-({									\
-	unsigned long __pto;						\
-	current->thread.mm_segment = (x);				\
-	__pto = current->thread.mm_segment.ar4 ?			\
-		S390_lowcore.user_asce : S390_lowcore.kernel_asce;	\
-	__ctl_load(__pto, 7, 7);					\
-})
-
-#define segment_eq(a,b) ((a).ar4 == (b).ar4)
-
-
-static inline int __access_ok(const void __user *addr, unsigned long size)
-{
-	return 1;
-}
-#define access_ok(type,addr,size) __access_ok(addr,size)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-        unsigned long insn, fixup;
-};
-
-struct uaccess_ops {
-	size_t (*copy_from_user)(size_t, const void __user *, void *);
-	size_t (*copy_from_user_small)(size_t, const void __user *, void *);
-	size_t (*copy_to_user)(size_t, void __user *, const void *);
-	size_t (*copy_to_user_small)(size_t, void __user *, const void *);
-	size_t (*copy_in_user)(size_t, void __user *, const void __user *);
-	size_t (*clear_user)(size_t, void __user *);
-	size_t (*strnlen_user)(size_t, const char __user *);
-	size_t (*strncpy_from_user)(size_t, const char __user *, char *);
-	int (*futex_atomic_op)(int op, int __user *, int oparg, int *old);
-	int (*futex_atomic_cmpxchg)(int __user *, int old, int new);
-};
-
-extern struct uaccess_ops uaccess;
-extern struct uaccess_ops uaccess_std;
-extern struct uaccess_ops uaccess_mvcos;
-extern struct uaccess_ops uaccess_mvcos_switch;
-extern struct uaccess_ops uaccess_pt;
-
-static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
-{
-	size = uaccess.copy_to_user_small(size, ptr, x);
-	return size ? -EFAULT : size;
-}
-
-static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
-{
-	size = uaccess.copy_from_user_small(size, ptr, x);
-	return size ? -EFAULT : size;
-}
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-#define __put_user(x, ptr) \
-({								\
-	__typeof__(*(ptr)) __x = (x);				\
-	int __pu_err = -EFAULT;					\
-        __chk_user_ptr(ptr);                                    \
-	switch (sizeof (*(ptr))) {				\
-	case 1:							\
-	case 2:							\
-	case 4:							\
-	case 8:							\
-		__pu_err = __put_user_fn(sizeof (*(ptr)),	\
-					 ptr, &__x);		\
-		break;						\
-	default:						\
-		__put_user_bad();				\
-		break;						\
-	 }							\
-	__pu_err;						\
-})
-
-#define put_user(x, ptr)					\
-({								\
-	might_sleep();						\
-	__put_user(x, ptr);					\
-})
-
-
-extern int __put_user_bad(void) __attribute__((noreturn));
-
-#define __get_user(x, ptr)					\
-({								\
-	int __gu_err = -EFAULT;					\
-	__chk_user_ptr(ptr);					\
-	switch (sizeof(*(ptr))) {				\
-	case 1: {						\
-		unsigned char __x;				\
-		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
-					 ptr, &__x);		\
-		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
-		break;						\
-	};							\
-	case 2: {						\
-		unsigned short __x;				\
-		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
-					 ptr, &__x);		\
-		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
-		break;						\
-	};							\
-	case 4: {						\
-		unsigned int __x;				\
-		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
-					 ptr, &__x);		\
-		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
-		break;						\
-	};							\
-	case 8: {						\
-		unsigned long long __x;				\
-		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
-					 ptr, &__x);		\
-		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
-		break;						\
-	};							\
-	default:						\
-		__get_user_bad();				\
-		break;						\
-	}							\
-	__gu_err;						\
-})
-
-#define get_user(x, ptr)					\
-({								\
-	might_sleep();						\
-	__get_user(x, ptr);					\
-})
-
-extern int __get_user_bad(void) __attribute__((noreturn));
-
-#define __put_user_unaligned __put_user
-#define __get_user_unaligned __get_user
-
-/**
- * __copy_to_user: - Copy a block of data into user space, with less checking.
- * @to:   Destination address, in user space.
- * @from: Source address, in kernel space.
- * @n:    Number of bytes to copy.
- *
- * Context: User context only.  This function may sleep.
- *
- * Copy data from kernel space to user space.  Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- */
-static inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	if (__builtin_constant_p(n) && (n <= 256))
-		return uaccess.copy_to_user_small(n, to, from);
-	else
-		return uaccess.copy_to_user(n, to, from);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/**
- * copy_to_user: - Copy a block of data into user space.
- * @to:   Destination address, in user space.
- * @from: Source address, in kernel space.
- * @n:    Number of bytes to copy.
- *
- * Context: User context only.  This function may sleep.
- *
- * Copy data from kernel space to user space.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- */
-static inline unsigned long __must_check
-copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	might_sleep();
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = __copy_to_user(to, from, n);
-	return n;
-}
-
-/**
- * __copy_from_user: - Copy a block of data from user space, with less checking.
- * @to:   Destination address, in kernel space.
- * @from: Source address, in user space.
- * @n:    Number of bytes to copy.
- *
- * Context: User context only.  This function may sleep.
- *
- * Copy data from user space to kernel space.  Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- *
- * If some data could not be copied, this function will pad the copied
- * data to the requested size using zero bytes.
- */
-static inline unsigned long __must_check
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	if (__builtin_constant_p(n) && (n <= 256))
-		return uaccess.copy_from_user_small(n, from, to);
-	else
-		return uaccess.copy_from_user(n, from, to);
-}
-
-/**
- * copy_from_user: - Copy a block of data from user space.
- * @to:   Destination address, in kernel space.
- * @from: Source address, in user space.
- * @n:    Number of bytes to copy.
- *
- * Context: User context only.  This function may sleep.
- *
- * Copy data from user space to kernel space.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- *
- * If some data could not be copied, this function will pad the copied
- * data to the requested size using zero bytes.
- */
-static inline unsigned long __must_check
-copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	might_sleep();
-	if (access_ok(VERIFY_READ, from, n))
-		n = __copy_from_user(to, from, n);
-	else
-		memset(to, 0, n);
-	return n;
-}
-
-static inline unsigned long __must_check
-__copy_in_user(void __user *to, const void __user *from, unsigned long n)
-{
-	return uaccess.copy_in_user(n, to, from);
-}
-
-static inline unsigned long __must_check
-copy_in_user(void __user *to, const void __user *from, unsigned long n)
-{
-	might_sleep();
-	if (__access_ok(from,n) && __access_ok(to,n))
-		n = __copy_in_user(to, from, n);
-	return n;
-}
-
-/*
- * Copy a null terminated string from userspace.
- */
-static inline long __must_check
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
-        long res = -EFAULT;
-        might_sleep();
-        if (access_ok(VERIFY_READ, src, 1))
-		res = uaccess.strncpy_from_user(count, src, dst);
-        return res;
-}
-
-static inline unsigned long
-strnlen_user(const char __user * src, unsigned long n)
-{
-	might_sleep();
-	return uaccess.strnlen_user(n, src);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str) strnlen_user(str, ~0UL)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long __must_check
-__clear_user(void __user *to, unsigned long n)
-{
-	return uaccess.clear_user(n, to);
-}
-
-static inline unsigned long __must_check
-clear_user(void __user *to, unsigned long n)
-{
-	might_sleep();
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = uaccess.clear_user(n, to);
-	return n;
-}
-
-#endif /* __S390_UACCESS_H */
diff --git a/include/asm-s390/ucontext.h b/include/asm-s390/ucontext.h
deleted file mode 100644
index d69bec0b03f5..000000000000
--- a/include/asm-s390/ucontext.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-s390/ucontext.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/ucontext.h"
- */
-
-#ifndef _ASM_S390_UCONTEXT_H
-#define _ASM_S390_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	_sigregs          uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* !_ASM_S390_UCONTEXT_H */
diff --git a/include/asm-s390/unaligned.h b/include/asm-s390/unaligned.h
deleted file mode 100644
index da9627afe5d8..000000000000
--- a/include/asm-s390/unaligned.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _ASM_S390_UNALIGNED_H
-#define _ASM_S390_UNALIGNED_H
-
-/*
- * The S390 can do unaligned accesses itself. 
- */
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif /* _ASM_S390_UNALIGNED_H */
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
deleted file mode 100644
index 583da807ea97..000000000000
--- a/include/asm-s390/unistd.h
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- *  include/asm-s390/unistd.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/unistd.h"
- */
-
-#ifndef _ASM_S390_UNISTD_H_
-#define _ASM_S390_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_exit                 1
-#define __NR_fork                 2
-#define __NR_read                 3
-#define __NR_write                4
-#define __NR_open                 5
-#define __NR_close                6
-#define __NR_restart_syscall	  7
-#define __NR_creat                8
-#define __NR_link                 9
-#define __NR_unlink              10
-#define __NR_execve              11
-#define __NR_chdir               12
-#define __NR_mknod               14
-#define __NR_chmod               15
-#define __NR_lseek               19
-#define __NR_getpid              20
-#define __NR_mount               21
-#define __NR_umount              22
-#define __NR_ptrace              26
-#define __NR_alarm               27
-#define __NR_pause               29
-#define __NR_utime               30
-#define __NR_access              33
-#define __NR_nice                34
-#define __NR_sync                36
-#define __NR_kill                37
-#define __NR_rename              38
-#define __NR_mkdir               39
-#define __NR_rmdir               40
-#define __NR_dup                 41
-#define __NR_pipe                42
-#define __NR_times               43
-#define __NR_brk                 45
-#define __NR_signal              48
-#define __NR_acct                51
-#define __NR_umount2             52
-#define __NR_ioctl               54
-#define __NR_fcntl               55
-#define __NR_setpgid             57
-#define __NR_umask               60
-#define __NR_chroot              61
-#define __NR_ustat               62
-#define __NR_dup2                63
-#define __NR_getppid             64
-#define __NR_getpgrp             65
-#define __NR_setsid              66
-#define __NR_sigaction           67
-#define __NR_sigsuspend          72
-#define __NR_sigpending          73
-#define __NR_sethostname         74
-#define __NR_setrlimit           75
-#define __NR_getrusage           77
-#define __NR_gettimeofday        78
-#define __NR_settimeofday        79
-#define __NR_symlink             83
-#define __NR_readlink            85
-#define __NR_uselib              86
-#define __NR_swapon              87
-#define __NR_reboot              88
-#define __NR_readdir             89
-#define __NR_mmap                90
-#define __NR_munmap              91
-#define __NR_truncate            92
-#define __NR_ftruncate           93
-#define __NR_fchmod              94
-#define __NR_getpriority         96
-#define __NR_setpriority         97
-#define __NR_statfs              99
-#define __NR_fstatfs            100
-#define __NR_socketcall         102
-#define __NR_syslog             103
-#define __NR_setitimer          104
-#define __NR_getitimer          105
-#define __NR_stat               106
-#define __NR_lstat              107
-#define __NR_fstat              108
-#define __NR_lookup_dcookie     110
-#define __NR_vhangup            111
-#define __NR_idle               112
-#define __NR_wait4              114
-#define __NR_swapoff            115
-#define __NR_sysinfo            116
-#define __NR_ipc                117
-#define __NR_fsync              118
-#define __NR_sigreturn          119
-#define __NR_clone              120
-#define __NR_setdomainname      121
-#define __NR_uname              122
-#define __NR_adjtimex           124
-#define __NR_mprotect           125
-#define __NR_sigprocmask        126
-#define __NR_create_module      127
-#define __NR_init_module        128
-#define __NR_delete_module      129
-#define __NR_get_kernel_syms    130
-#define __NR_quotactl           131
-#define __NR_getpgid            132
-#define __NR_fchdir             133
-#define __NR_bdflush            134
-#define __NR_sysfs              135
-#define __NR_personality        136
-#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
-#define __NR_getdents           141
-#define __NR_flock              143
-#define __NR_msync              144
-#define __NR_readv              145
-#define __NR_writev             146
-#define __NR_getsid             147
-#define __NR_fdatasync          148
-#define __NR__sysctl            149
-#define __NR_mlock              150
-#define __NR_munlock            151
-#define __NR_mlockall           152
-#define __NR_munlockall         153
-#define __NR_sched_setparam             154
-#define __NR_sched_getparam             155
-#define __NR_sched_setscheduler         156
-#define __NR_sched_getscheduler         157
-#define __NR_sched_yield                158
-#define __NR_sched_get_priority_max     159
-#define __NR_sched_get_priority_min     160
-#define __NR_sched_rr_get_interval      161
-#define __NR_nanosleep          162
-#define __NR_mremap             163
-#define __NR_query_module       167
-#define __NR_poll               168
-#define __NR_nfsservctl         169
-#define __NR_prctl              172
-#define __NR_rt_sigreturn       173
-#define __NR_rt_sigaction       174
-#define __NR_rt_sigprocmask     175
-#define __NR_rt_sigpending      176
-#define __NR_rt_sigtimedwait    177
-#define __NR_rt_sigqueueinfo    178
-#define __NR_rt_sigsuspend      179
-#define __NR_pread64            180
-#define __NR_pwrite64           181
-#define __NR_getcwd             183
-#define __NR_capget             184
-#define __NR_capset             185
-#define __NR_sigaltstack        186
-#define __NR_sendfile           187
-#define __NR_getpmsg		188
-#define __NR_putpmsg		189
-#define __NR_vfork		190
-#define __NR_pivot_root         217
-#define __NR_mincore            218
-#define __NR_madvise            219
-#define __NR_getdents64		220
-#define __NR_readahead		222
-#define __NR_setxattr		224
-#define __NR_lsetxattr		225
-#define __NR_fsetxattr		226
-#define __NR_getxattr		227
-#define __NR_lgetxattr		228
-#define __NR_fgetxattr		229
-#define __NR_listxattr		230
-#define __NR_llistxattr		231
-#define __NR_flistxattr		232
-#define __NR_removexattr	233
-#define __NR_lremovexattr	234
-#define __NR_fremovexattr	235
-#define __NR_gettid		236
-#define __NR_tkill		237
-#define __NR_futex		238
-#define __NR_sched_setaffinity	239
-#define __NR_sched_getaffinity	240
-#define __NR_tgkill		241
-/* Number 242 is reserved for tux */
-#define __NR_io_setup		243
-#define __NR_io_destroy		244
-#define __NR_io_getevents	245
-#define __NR_io_submit		246
-#define __NR_io_cancel		247
-#define __NR_exit_group		248
-#define __NR_epoll_create	249
-#define __NR_epoll_ctl		250
-#define __NR_epoll_wait		251
-#define __NR_set_tid_address	252
-#define __NR_fadvise64		253
-#define __NR_timer_create	254
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-/* Number 263 is reserved for vserver */
-#define __NR_statfs64		265
-#define __NR_fstatfs64		266
-#define __NR_remap_file_pages	267
-/* Number 268 is reserved for new sys_mbind */
-/* Number 269 is reserved for new sys_get_mempolicy */
-/* Number 270 is reserved for new sys_set_mempolicy */
-#define __NR_mq_open		271
-#define __NR_mq_unlink		272
-#define __NR_mq_timedsend	273
-#define __NR_mq_timedreceive	274
-#define __NR_mq_notify		275
-#define __NR_mq_getsetattr	276
-#define __NR_kexec_load		277
-#define __NR_add_key		278
-#define __NR_request_key	279
-#define __NR_keyctl		280
-#define __NR_waitid		281
-#define __NR_ioprio_set		282
-#define __NR_ioprio_get		283
-#define __NR_inotify_init	284
-#define __NR_inotify_add_watch	285
-#define __NR_inotify_rm_watch	286
-/* Number 287 is reserved for new sys_migrate_pages */
-#define __NR_openat		288
-#define __NR_mkdirat		289
-#define __NR_mknodat		290
-#define __NR_fchownat		291
-#define __NR_futimesat		292
-#define __NR_unlinkat		294
-#define __NR_renameat		295
-#define __NR_linkat		296
-#define __NR_symlinkat		297
-#define __NR_readlinkat		298
-#define __NR_fchmodat		299
-#define __NR_faccessat		300
-#define __NR_pselect6		301
-#define __NR_ppoll		302
-#define __NR_unshare		303
-#define __NR_set_robust_list	304
-#define __NR_get_robust_list	305
-#define __NR_splice		306
-#define __NR_sync_file_range	307
-#define __NR_tee		308
-#define __NR_vmsplice		309
-/* Number 310 is reserved for new sys_move_pages */
-#define __NR_getcpu		311
-#define __NR_epoll_pwait	312
-#define __NR_utimes		313
-#define __NR_fallocate		314
-#define __NR_utimensat		315
-#define __NR_signalfd		316
-#define __NR_timerfd		317
-#define __NR_eventfd		318
-#define __NR_timerfd_create	319
-#define __NR_timerfd_settime	320
-#define __NR_timerfd_gettime	321
-#define NR_syscalls 322
-
-/* 
- * There are some system calls that are not present on 64 bit, some
- * have a different name although they do the same (e.g. __NR_chown32
- * is __NR_chown on 64 bit).
- */
-#ifndef __s390x__
-
-#define __NR_time		 13
-#define __NR_lchown		 16
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_getrlimit		 76
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_fchown		 95
-#define __NR_ioperm		101
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR__newselect 	142
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_chown		182
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_fcntl64		221
-#define __NR_sendfile64		223
-#define __NR_fadvise64_64	264
-#define __NR_fstatat64		293
-
-#else
-
-#define __NR_select		142
-#define __NR_getrlimit		191	/* SuS compliant getrlimit */
-#define __NR_lchown  		198
-#define __NR_getuid  		199
-#define __NR_getgid  		200
-#define __NR_geteuid  		201
-#define __NR_getegid  		202
-#define __NR_setreuid  		203
-#define __NR_setregid  		204
-#define __NR_getgroups  	205
-#define __NR_setgroups  	206
-#define __NR_fchown  		207
-#define __NR_setresuid  	208
-#define __NR_getresuid  	209
-#define __NR_setresgid  	210
-#define __NR_getresgid  	211
-#define __NR_chown  		212
-#define __NR_setuid  		213
-#define __NR_setgid  		214
-#define __NR_setfsuid  		215
-#define __NR_setfsgid  		216
-#define __NR_newfstatat		293
-
-#endif
-
-#ifdef __KERNEL__
-
-#ifndef CONFIG_64BIT
-#define __IGNORE_select
-#else
-#define __IGNORE_time
-#endif
-
-/* Ignore NUMA system calls. Not wired up on s390. */
-#define __IGNORE_mbind
-#define __IGNORE_get_mempolicy
-#define __IGNORE_set_mempolicy
-#define __IGNORE_migrate_pages
-#define __IGNORE_move_pages
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-# ifndef CONFIG_64BIT
-#   define __ARCH_WANT_STAT64
-#   define __ARCH_WANT_SYS_TIME
-# endif
-# ifdef CONFIG_COMPAT
-#   define __ARCH_WANT_COMPAT_SYS_TIME
-#   define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-# endif
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_S390_UNISTD_H_ */
diff --git a/include/asm-s390/user.h b/include/asm-s390/user.h
deleted file mode 100644
index 1b050e35fdc6..000000000000
--- a/include/asm-s390/user.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  include/asm-s390/user.h
- *
- *  S390 version
- *
- *  Derived from "include/asm-i386/usr.h"
- */
-
-#ifndef _S390_USER_H
-#define _S390_USER_H
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-
-/*
- * This is the old layout of "struct pt_regs", and
- * is still the layout used by user mode (the new
- * pt_regs doesn't have all registers as the kernel
- * doesn't use the extra segment registers)
- */
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user {
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct user_regs_struct regs;		/* Where the registers are actually stored */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;	/* Text segment size (pages). */
-  unsigned long int u_dsize;	/* Data segment size (pages). */
-  unsigned long int u_ssize;	/* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  long int signal;     		/* Signal that caused the core dump. */
-  unsigned long u_ar0;		/* Used by gdb to help find the values for */
-				/* the registers. */
-  unsigned long magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _S390_USER_H */
diff --git a/include/asm-s390/vtoc.h b/include/asm-s390/vtoc.h
deleted file mode 100644
index 3a5267d90d29..000000000000
--- a/include/asm-s390/vtoc.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * include/asm-s390/vtoc.h
- *
- * This file contains volume label definitions for DASD devices.
- *
- * (C) Copyright IBM Corp. 2005
- *
- * Author(s): Volker Sameske <sameske@de.ibm.com>
- *
- */
-
-#ifndef _ASM_S390_VTOC_H
-#define _ASM_S390_VTOC_H
-
-#include <linux/types.h>
-
-struct vtoc_ttr
-{
-	__u16 tt;
-	__u8 r;
-} __attribute__ ((packed));
-
-struct vtoc_cchhb
-{
-	__u16 cc;
-	__u16 hh;
-	__u8 b;
-} __attribute__ ((packed));
-
-struct vtoc_cchh
-{
-	__u16 cc;
-	__u16 hh;
-} __attribute__ ((packed));
-
-struct vtoc_labeldate
-{
-	__u8 year;
-	__u16 day;
-} __attribute__ ((packed));
-
-struct vtoc_volume_label
-{
-	char volkey[4];		/* volume key = volume label */
-	char vollbl[4];		/* volume label */
-	char volid[6];		/* volume identifier */
-	__u8 security;		/* security byte */
-	struct vtoc_cchhb vtoc;	/* VTOC address */
-	char res1[5];		/* reserved */
-	char cisize[4];		/* CI-size for FBA,... */
-				/* ...blanks for CKD */
-	char blkperci[4];	/* no of blocks per CI (FBA), blanks for CKD */
-	char labperci[4];	/* no of labels per CI (FBA), blanks for CKD */
-	char res2[4];		/* reserved */
-	char lvtoc[14];		/* owner code for LVTOC */
-	char res3[29];		/* reserved */
-} __attribute__ ((packed));
-
-struct vtoc_extent
-{
-	__u8 typeind;			/* extent type indicator */
-	__u8 seqno;			/* extent sequence number */
-	struct vtoc_cchh llimit;	/* starting point of this extent */
-	struct vtoc_cchh ulimit;	/* ending point of this extent */
-} __attribute__ ((packed));
-
-struct vtoc_dev_const
-{
-	__u16 DS4DSCYL;	/* number of logical cyls */
-	__u16 DS4DSTRK;	/* number of tracks in a logical cylinder */
-	__u16 DS4DEVTK;	/* device track length */
-	__u8 DS4DEVI;	/* non-last keyed record overhead */
-	__u8 DS4DEVL;	/* last keyed record overhead */
-	__u8 DS4DEVK;	/* non-keyed record overhead differential */
-	__u8 DS4DEVFG;	/* flag byte */
-	__u16 DS4DEVTL;	/* device tolerance */
-	__u8 DS4DEVDT;	/* number of DSCB's per track */
-	__u8 DS4DEVDB;	/* number of directory blocks per track */
-} __attribute__ ((packed));
-
-struct vtoc_format1_label
-{
-	char DS1DSNAM[44];	/* data set name */
-	__u8 DS1FMTID;		/* format identifier */
-	char DS1DSSN[6];	/* data set serial number */
-	__u16 DS1VOLSQ;		/* volume sequence number */
-	struct vtoc_labeldate DS1CREDT; /* creation date: ydd */
-	struct vtoc_labeldate DS1EXPDT; /* expiration date */
-	__u8 DS1NOEPV;		/* number of extents on volume */
-	__u8 DS1NOBDB;		/* no. of bytes used in last direction blk */
-	__u8 DS1FLAG1;		/* flag 1 */
-	char DS1SYSCD[13];	/* system code */
-	struct vtoc_labeldate DS1REFD; /* date last referenced	*/
-	__u8 DS1SMSFG;		/* system managed storage indicators */
-	__u8 DS1SCXTF;		/* sec. space extension flag byte */
-	__u16 DS1SCXTV;		/* secondary space extension value */
-	__u8 DS1DSRG1;		/* data set organisation byte 1 */
-	__u8 DS1DSRG2;		/* data set organisation byte 2 */
-	__u8 DS1RECFM;		/* record format */
-	__u8 DS1OPTCD;		/* option code */
-	__u16 DS1BLKL;		/* block length */
-	__u16 DS1LRECL;		/* record length */
-	__u8 DS1KEYL;		/* key length */
-	__u16 DS1RKP;		/* relative key position */
-	__u8 DS1DSIND;		/* data set indicators */
-	__u8 DS1SCAL1;		/* secondary allocation flag byte */
-	char DS1SCAL3[3];	/* secondary allocation quantity */
-	struct vtoc_ttr DS1LSTAR; /* last used track and block on track */
-	__u16 DS1TRBAL;		/* space remaining on last used track */
-	__u16 res1;		/* reserved */
-	struct vtoc_extent DS1EXT1; /* first extent description */
-	struct vtoc_extent DS1EXT2; /* second extent description */
-	struct vtoc_extent DS1EXT3; /* third extent description */
-	struct vtoc_cchhb DS1PTRDS; /* possible pointer to f2 or f3 DSCB */
-} __attribute__ ((packed));
-
-struct vtoc_format4_label
-{
-	char DS4KEYCD[44];	/* key code for VTOC labels: 44 times 0x04 */
-	__u8 DS4IDFMT;		/* format identifier */
-	struct vtoc_cchhb DS4HPCHR; /* highest address of a format 1 DSCB */
-	__u16 DS4DSREC;		/* number of available DSCB's */
-	struct vtoc_cchh DS4HCCHH; /* CCHH of next available alternate track */
-	__u16 DS4NOATK;		/* number of remaining alternate tracks */
-	__u8 DS4VTOCI;		/* VTOC indicators */
-	__u8 DS4NOEXT;		/* number of extents in VTOC */
-	__u8 DS4SMSFG;		/* system managed storage indicators */
-	__u8 DS4DEVAC;		/* number of alternate cylinders.
-				 * Subtract from first two bytes of
-				 * DS4DEVSZ to get number of usable
-				 * cylinders. can be zero. valid
-				 * only if DS4DEVAV on. */
-	struct vtoc_dev_const DS4DEVCT;	/* device constants */
-	char DS4AMTIM[8];	/* VSAM time stamp */
-	char DS4AMCAT[3];	/* VSAM catalog indicator */
-	char DS4R2TIM[8];	/* VSAM volume/catalog match time stamp */
-	char res1[5];		/* reserved */
-	char DS4F6PTR[5];	/* pointer to first format 6 DSCB */
-	struct vtoc_extent DS4VTOCE; /* VTOC extent description */
-	char res2[10];		/* reserved */
-	__u8 DS4EFLVL;		/* extended free-space management level */
-	struct vtoc_cchhb DS4EFPTR; /* pointer to extended free-space info */
-	char res3[9];		/* reserved */
-} __attribute__ ((packed));
-
-struct vtoc_ds5ext
-{
-	__u16 t;	/* RTA of the first track of free extent */
-	__u16 fc;	/* number of whole cylinders in free ext. */
-	__u8 ft;	/* number of remaining free tracks */
-} __attribute__ ((packed));
-
-struct vtoc_format5_label
-{
-	char DS5KEYID[4];	/* key identifier */
-	struct vtoc_ds5ext DS5AVEXT; /* first available (free-space) extent. */
-	struct vtoc_ds5ext DS5EXTAV[7]; /* seven available extents */
-	__u8 DS5FMTID;		/* format identifier */
-	struct vtoc_ds5ext DS5MAVET[18]; /* eighteen available extents */
-	struct vtoc_cchhb DS5PTRDS; /* pointer to next format5 DSCB */
-} __attribute__ ((packed));
-
-struct vtoc_ds7ext
-{
-	__u32 a; /* starting RTA value */
-	__u32 b; /* ending RTA value + 1 */
-} __attribute__ ((packed));
-
-struct vtoc_format7_label
-{
-	char DS7KEYID[4];	/* key identifier */
-	struct vtoc_ds7ext DS7EXTNT[5]; /* space for 5 extent descriptions */
-	__u8 DS7FMTID;		/* format identifier */
-	struct vtoc_ds7ext DS7ADEXT[11]; /* space for 11 extent descriptions */
-	char res1[2];		/* reserved */
-	struct vtoc_cchhb DS7PTRDS; /* pointer to next FMT7 DSCB */
-} __attribute__ ((packed));
-
-struct vtoc_cms_label {
-	__u8 label_id[4];		/* Label identifier */
-	__u8 vol_id[6];		/* Volid */
-	__u16 version_id;		/* Version identifier */
-	__u32 block_size;		/* Disk block size */
-	__u32 origin_ptr;		/* Disk origin pointer */
-	__u32 usable_count;	/* Number of usable cylinders/blocks */
-	__u32 formatted_count;	/* Maximum number of formatted cylinders/
-				 * blocks */
-	__u32 block_count;	/* Disk size in CMS blocks */
-	__u32 used_count;		/* Number of CMS blocks in use */
-	__u32 fst_size;		/* File Status Table (FST) size */
-	__u32 fst_count;		/* Number of FSTs per CMS block */
-	__u8 format_date[6];	/* Disk FORMAT date */
-	__u8 reserved1[2];
-	__u32 disk_offset;	/* Disk offset when reserved*/
-	__u32 map_block;		/* Allocation Map Block with next hole */
-	__u32 hblk_disp;		/* Displacement into HBLK data of next hole */
-	__u32 user_disp;		/* Displacement into user part of Allocation
-				 * map */
-	__u8 reserved2[4];
-	__u8 segment_name[8];	/* Name of shared segment */
-} __attribute__ ((packed));
-
-#endif /* _ASM_S390_VTOC_H */
diff --git a/include/asm-s390/xor.h b/include/asm-s390/xor.h
deleted file mode 100644
index c82eb12a5b18..000000000000
--- a/include/asm-s390/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/include/asm-s390/zcrypt.h b/include/asm-s390/zcrypt.h
deleted file mode 100644
index 00d3bbd44117..000000000000
--- a/include/asm-s390/zcrypt.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *  include/asm-s390/zcrypt.h
- *
- *  zcrypt 2.1.0 (user-visible header)
- *
- *  Copyright (C)  2001, 2006 IBM Corporation
- *  Author(s): Robert Burroughs
- *	       Eric Rossman (edrossma@us.ibm.com)
- *
- *  Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_S390_ZCRYPT_H
-#define __ASM_S390_ZCRYPT_H
-
-#define ZCRYPT_VERSION 2
-#define ZCRYPT_RELEASE 1
-#define ZCRYPT_VARIANT 1
-
-#include <linux/ioctl.h>
-#include <linux/compiler.h>
-
-/**
- * struct ica_rsa_modexpo
- *
- * Requirements:
- * - outputdatalength is at least as large as inputdatalength.
- * - All key parts are right justified in their fields, padded on
- *   the left with zeroes.
- * - length(b_key) = inputdatalength
- * - length(n_modulus) = inputdatalength
- */
-struct ica_rsa_modexpo {
-	char __user *	inputdata;
-	unsigned int	inputdatalength;
-	char __user *	outputdata;
-	unsigned int	outputdatalength;
-	char __user *	b_key;
-	char __user *	n_modulus;
-};
-
-/**
- * struct ica_rsa_modexpo_crt
- *
- * Requirements:
- * - inputdatalength is even.
- * - outputdatalength is at least as large as inputdatalength.
- * - All key parts are right justified in their fields, padded on
- *   the left with zeroes.
- * - length(bp_key)	= inputdatalength/2 + 8
- * - length(bq_key)	= inputdatalength/2
- * - length(np_key)	= inputdatalength/2 + 8
- * - length(nq_key)	= inputdatalength/2
- * - length(u_mult_inv) = inputdatalength/2 + 8
- */
-struct ica_rsa_modexpo_crt {
-	char __user *	inputdata;
-	unsigned int	inputdatalength;
-	char __user *	outputdata;
-	unsigned int	outputdatalength;
-	char __user *	bp_key;
-	char __user *	bq_key;
-	char __user *	np_prime;
-	char __user *	nq_prime;
-	char __user *	u_mult_inv;
-};
-
-/**
- * CPRBX
- *	  Note that all shorts and ints are big-endian.
- *	  All pointer fields are 16 bytes long, and mean nothing.
- *
- *	  A request CPRB is followed by a request_parameter_block.
- *
- *	  The request (or reply) parameter block is organized thus:
- *	    function code
- *	    VUD block
- *	    key block
- */
-struct CPRBX {
-	unsigned short	cprb_len;	/* CPRB length	      220	 */
-	unsigned char	cprb_ver_id;	/* CPRB version id.   0x02	 */
-	unsigned char	pad_000[3];	/* Alignment pad bytes		 */
-	unsigned char	func_id[2];	/* function id	      0x5432	 */
-	unsigned char	cprb_flags[4];	/* Flags			 */
-	unsigned int	req_parml;	/* request parameter buffer len	 */
-	unsigned int	req_datal;	/* request data buffer		 */
-	unsigned int	rpl_msgbl;	/* reply  message block length	 */
-	unsigned int	rpld_parml;	/* replied parameter block len	 */
-	unsigned int	rpl_datal;	/* reply data block len		 */
-	unsigned int	rpld_datal;	/* replied data block len	 */
-	unsigned int	req_extbl;	/* request extension block len	 */
-	unsigned char	pad_001[4];	/* reserved			 */
-	unsigned int	rpld_extbl;	/* replied extension block len	 */
-	unsigned char	padx000[16 - sizeof (char *)];
-	unsigned char *	req_parmb;	/* request parm block 'address'	 */
-	unsigned char	padx001[16 - sizeof (char *)];
-	unsigned char *	req_datab;	/* request data block 'address'	 */
-	unsigned char	padx002[16 - sizeof (char *)];
-	unsigned char *	rpl_parmb;	/* reply parm block 'address'	 */
-	unsigned char	padx003[16 - sizeof (char *)];
-	unsigned char *	rpl_datab;	/* reply data block 'address'	 */
-	unsigned char	padx004[16 - sizeof (char *)];
-	unsigned char *	req_extb;	/* request extension block 'addr'*/
-	unsigned char	padx005[16 - sizeof (char *)];
-	unsigned char *	rpl_extb;	/* reply extension block 'address'*/
-	unsigned short	ccp_rtcode;	/* server return code		 */
-	unsigned short	ccp_rscode;	/* server reason code		 */
-	unsigned int	mac_data_len;	/* Mac Data Length		 */
-	unsigned char	logon_id[8];	/* Logon Identifier		 */
-	unsigned char	mac_value[8];	/* Mac Value			 */
-	unsigned char	mac_content_flgs;/* Mac content flag byte	 */
-	unsigned char	pad_002;	/* Alignment			 */
-	unsigned short	domain;		/* Domain			 */
-	unsigned char	usage_domain[4];/* Usage domain			 */
-	unsigned char	cntrl_domain[4];/* Control domain		 */
-	unsigned char	S390enf_mask[4];/* S/390 enforcement mask	 */
-	unsigned char	pad_004[36];	/* reserved			 */
-} __attribute__((packed));
-
-/**
- * xcRB
- */
-struct ica_xcRB {
-	unsigned short	agent_ID;
-	unsigned int	user_defined;
-	unsigned short	request_ID;
-	unsigned int	request_control_blk_length;
-	unsigned char	padding1[16 - sizeof (char *)];
-	char __user *	request_control_blk_addr;
-	unsigned int	request_data_length;
-	char		padding2[16 - sizeof (char *)];
-	char __user *	request_data_address;
-	unsigned int	reply_control_blk_length;
-	char		padding3[16 - sizeof (char *)];
-	char __user *	reply_control_blk_addr;
-	unsigned int	reply_data_length;
-	char		padding4[16 - sizeof (char *)];
-	char __user *	reply_data_addr;
-	unsigned short	priority_window;
-	unsigned int	status;
-} __attribute__((packed));
-#define AUTOSELECT ((unsigned int)0xFFFFFFFF)
-
-#define ZCRYPT_IOCTL_MAGIC 'z'
-
-/**
- * Interface notes:
- *
- * The ioctl()s which are implemented (along with relevant details)
- * are:
- *
- *   ICARSAMODEXPO
- *     Perform an RSA operation using a Modulus-Exponent pair
- *     This takes an ica_rsa_modexpo struct as its arg.
- *
- *     NOTE: please refer to the comments preceding this structure
- *	     for the implementation details for the contents of the
- *	     block
- *
- *   ICARSACRT
- *     Perform an RSA operation using a Chinese-Remainder Theorem key
- *     This takes an ica_rsa_modexpo_crt struct as its arg.
- *
- *     NOTE: please refer to the comments preceding this structure
- *	     for the implementation details for the contents of the
- *	     block
- *
- *   ZSECSENDCPRB
- *     Send an arbitrary CPRB to a crypto card.
- *
- *   Z90STAT_STATUS_MASK
- *     Return an 64 element array of unsigned chars for the status of
- *     all devices.
- *	 0x01: PCICA
- *	 0x02: PCICC
- *	 0x03: PCIXCC_MCL2
- *	 0x04: PCIXCC_MCL3
- *	 0x05: CEX2C
- *	 0x06: CEX2A
- *	 0x0d: device is disabled via the proc filesystem
- *
- *   Z90STAT_QDEPTH_MASK
- *     Return an 64 element array of unsigned chars for the queue
- *     depth of all devices.
- *
- *   Z90STAT_PERDEV_REQCNT
- *     Return an 64 element array of unsigned integers for the number
- *     of successfully completed requests per device since the device
- *     was detected and made available.
- *
- *   Z90STAT_REQUESTQ_COUNT
- *     Return an integer count of the number of entries waiting to be
- *     sent to a device.
- *
- *   Z90STAT_PENDINGQ_COUNT
- *     Return an integer count of the number of entries sent to all
- *     devices awaiting the reply.
- *
- *   Z90STAT_TOTALOPEN_COUNT
- *     Return an integer count of the number of open file handles.
- *
- *   Z90STAT_DOMAIN_INDEX
- *     Return the integer value of the Cryptographic Domain.
- *
- *   The following ioctls are deprecated and should be no longer used:
- *
- *   Z90STAT_TOTALCOUNT
- *     Return an integer count of all device types together.
- *
- *   Z90STAT_PCICACOUNT
- *     Return an integer count of all PCICAs.
- *
- *   Z90STAT_PCICCCOUNT
- *     Return an integer count of all PCICCs.
- *
- *   Z90STAT_PCIXCCMCL2COUNT
- *     Return an integer count of all MCL2 PCIXCCs.
- *
- *   Z90STAT_PCIXCCMCL3COUNT
- *     Return an integer count of all MCL3 PCIXCCs.
- *
- *   Z90STAT_CEX2CCOUNT
- *     Return an integer count of all CEX2Cs.
- *
- *   Z90STAT_CEX2ACOUNT
- *     Return an integer count of all CEX2As.
- *
- *   ICAZ90STATUS
- *     Return some device driver status in a ica_z90_status struct
- *     This takes an ica_z90_status struct as its arg.
- *
- *   Z90STAT_PCIXCCCOUNT
- *     Return an integer count of all PCIXCCs (MCL2 + MCL3).
- *     This is DEPRECATED now that MCL3 PCIXCCs are treated differently from
- *     MCL2 PCIXCCs.
- */
-
-/**
- * Supported ioctl calls
- */
-#define ICARSAMODEXPO	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x05, 0)
-#define ICARSACRT	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x06, 0)
-#define ZSECSENDCPRB	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x81, 0)
-
-/* New status calls */
-#define Z90STAT_TOTALCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x40, int)
-#define Z90STAT_PCICACOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x41, int)
-#define Z90STAT_PCICCCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x42, int)
-#define Z90STAT_PCIXCCMCL2COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4b, int)
-#define Z90STAT_PCIXCCMCL3COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4c, int)
-#define Z90STAT_CEX2CCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4d, int)
-#define Z90STAT_CEX2ACOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4e, int)
-#define Z90STAT_REQUESTQ_COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x44, int)
-#define Z90STAT_PENDINGQ_COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x45, int)
-#define Z90STAT_TOTALOPEN_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x46, int)
-#define Z90STAT_DOMAIN_INDEX	_IOR(ZCRYPT_IOCTL_MAGIC, 0x47, int)
-#define Z90STAT_STATUS_MASK	_IOR(ZCRYPT_IOCTL_MAGIC, 0x48, char[64])
-#define Z90STAT_QDEPTH_MASK	_IOR(ZCRYPT_IOCTL_MAGIC, 0x49, char[64])
-#define Z90STAT_PERDEV_REQCNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4a, int[64])
-
-#endif /* __ASM_S390_ZCRYPT_H */
diff --git a/include/asm-sh/.gitignore b/include/asm-sh/.gitignore
deleted file mode 100644
index 9218ef82b698..000000000000
--- a/include/asm-sh/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-cpu
-mach
-machtypes.h
diff --git a/include/asm-sh/Kbuild b/include/asm-sh/Kbuild
deleted file mode 100644
index 43910cdf78a5..000000000000
--- a/include/asm-sh/Kbuild
+++ /dev/null
@@ -1,8 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += cpu-features.h
-
-unifdef-y += unistd_32.h
-unifdef-y += unistd_64.h
-unifdef-y += posix_types_32.h
-unifdef-y += posix_types_64.h
diff --git a/include/asm-sh/a.out.h b/include/asm-sh/a.out.h
deleted file mode 100644
index 1f93130e179c..000000000000
--- a/include/asm-sh/a.out.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SH_A_OUT_H
-#define __ASM_SH_A_OUT_H
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#endif /* __ASM_SH_A_OUT_H */
diff --git a/include/asm-sh/adc.h b/include/asm-sh/adc.h
deleted file mode 100644
index 5f85cf74d59d..000000000000
--- a/include/asm-sh/adc.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_ADC_H
-#define __ASM_ADC_H
-#ifdef __KERNEL__
-/*
- * Copyright (C) 2004  Andriy Skulysh
- */
-
-#include <asm/cpu/adc.h>
-
-int adc_single(unsigned int channel);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ADC_H */
diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h
deleted file mode 100644
index fa544fc38c23..000000000000
--- a/include/asm-sh/addrspace.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH CPUs.
- */
-#ifndef __ASM_SH_ADDRSPACE_H
-#define __ASM_SH_ADDRSPACE_H
-
-#ifdef __KERNEL__
-
-#include <asm/cpu/addrspace.h>
-
-/* If this CPU supports segmentation, hook up the helpers */
-#ifdef P1SEG
-
-/*
-   [ P0/U0 (virtual) ]		0x00000000     <------ User space
-   [ P1 (fixed)   cached ]	0x80000000     <------ Kernel space
-   [ P2 (fixed)  non-cachable]	0xA0000000     <------ Physical access
-   [ P3 (virtual) cached]	0xC0000000     <------ vmalloced area
-   [ P4 control   ]		0xE0000000
- */
-
-/* Returns the privileged segment base of a given address  */
-#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
-
-/* Returns the physical address of a PnSEG (n=1,2) address   */
-#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
-
-#ifdef CONFIG_29BIT
-/*
- * Map an address to a certain privileged segment
- */
-#define P1SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
-#define P2SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
-#define P3SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
-#define P4SEGADDR(a)	\
-	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT */
-#endif /* P1SEG */
-
-/* Check if an address can be reached in 29 bits */
-#define IS_29BIT(a)	(((unsigned long)(a)) < 0x20000000)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/include/asm-sh/atomic-grb.h b/include/asm-sh/atomic-grb.h
deleted file mode 100644
index 4c5b7dbfcedb..000000000000
--- a/include/asm-sh/atomic-grb.h
+++ /dev/null
@@ -1,169 +0,0 @@
-#ifndef __ASM_SH_ATOMIC_GRB_H
-#define __ASM_SH_ATOMIC_GRB_H
-
-static inline void atomic_add(int i, atomic_t *v)
-{
-	int tmp;
-
-	__asm__ __volatile__ (
-		"   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   add     %2,   %0      \n\t" /* add */
-		"   mov.l   %0,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (tmp),
-		  "+r"  (v)
-		: "r"   (i)
-		: "memory" , "r0", "r1");
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	int tmp;
-
-	__asm__ __volatile__ (
-		"   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   mov     r15,  r1      \n\t" /* r1 = saved sp */
-		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   sub     %2,   %0      \n\t" /* sub */
-		"   mov.l   %0,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (tmp),
-		  "+r"  (v)
-		: "r"   (i)
-		: "memory" , "r0", "r1");
-}
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int tmp;
-
-	__asm__ __volatile__ (
-		"   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   add     %2,   %0      \n\t" /* add */
-		"   mov.l   %0,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (tmp),
-		  "+r"  (v)
-		: "r"   (i)
-		: "memory" , "r0", "r1");
-
-	return tmp;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	int tmp;
-
-	__asm__ __volatile__ (
-		"   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   sub     %2,   %0      \n\t" /* sub */
-		"   mov.l   %0,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (tmp),
-		  "+r"  (v)
-		: "r"   (i)
-		: "memory", "r0", "r1");
-
-	return tmp;
-}
-
-static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
-{
-	int tmp;
-	unsigned int _mask = ~mask;
-
-	__asm__ __volatile__ (
-		"   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   and     %2,   %0      \n\t" /* add */
-		"   mov.l   %0,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (tmp),
-		  "+r"  (v)
-		: "r"   (_mask)
-		: "memory" , "r0", "r1");
-}
-
-static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
-{
-	int tmp;
-
-	__asm__ __volatile__ (
-		"   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   or      %2,   %0      \n\t" /* or */
-		"   mov.l   %0,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (tmp),
-		  "+r"  (v)
-		: "r"   (mask)
-		: "memory" , "r0", "r1");
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-
-	__asm__ __volatile__ (
-		"   .align 2		\n\t"
-		"   mova     1f,  r0	\n\t"
-		"   nop			\n\t"
-		"   mov     r15,  r1	\n\t"
-		"   mov    #-8,  r15	\n\t"
-		"   mov.l   @%1,  %0	\n\t"
-		"   cmp/eq   %2,  %0	\n\t"
-		"   bf	     1f		\n\t"
-		"   mov.l    %3, @%1	\n\t"
-		"1: mov      r1,  r15	\n\t"
-		: "=&r" (ret)
-		: "r" (v), "r" (old), "r" (new)
-		: "memory" , "r0", "r1" , "t");
-
-	return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int ret;
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-		"   .align 2		\n\t"
-		"   mova    1f,   r0	\n\t"
-		"   nop			\n\t"
-		"   mov    r15,   r1	\n\t"
-		"   mov    #-12,  r15	\n\t"
-		"   mov.l  @%2,   %1	\n\t"
-		"   mov	    %1,   %0    \n\t"
-		"   cmp/eq  %4,   %0	\n\t"
-		"   bt/s    1f		\n\t"
-		"    add    %3,   %1	\n\t"
-		"   mov.l   %1,  @%2	\n\t"
-		"1: mov     r1,   r15	\n\t"
-		: "=&r" (ret), "=&r" (tmp)
-		: "r" (v), "r" (a), "r" (u)
-		: "memory" , "r0", "r1" , "t");
-
-	return ret != u;
-}
-#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/include/asm-sh/atomic-irq.h b/include/asm-sh/atomic-irq.h
deleted file mode 100644
index 74f7943cff6f..000000000000
--- a/include/asm-sh/atomic-irq.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __ASM_SH_ATOMIC_IRQ_H
-#define __ASM_SH_ATOMIC_IRQ_H
-
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*(long *)v += i;
-	local_irq_restore(flags);
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*(long *)v -= i;
-	local_irq_restore(flags);
-}
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long temp, flags;
-
-	local_irq_save(flags);
-	temp = *(long *)v;
-	temp += i;
-	*(long *)v = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long temp, flags;
-
-	local_irq_save(flags);
-	temp = *(long *)v;
-	temp -= i;
-	*(long *)v = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*(long *)v &= ~mask;
-	local_irq_restore(flags);
-}
-
-static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*(long *)v |= mask;
-	local_irq_restore(flags);
-}
-
-#endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/include/asm-sh/atomic-llsc.h b/include/asm-sh/atomic-llsc.h
deleted file mode 100644
index 4b00b78e3f4f..000000000000
--- a/include/asm-sh/atomic-llsc.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef __ASM_SH_ATOMIC_LLSC_H
-#define __ASM_SH_ATOMIC_LLSC_H
-
-/*
- * To get proper branch prediction for the main line, we must branch
- * forward to code at the end of this object's .text section, then
- * branch back to restart the operation.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-"1:	movli.l @%2, %0		! atomic_add	\n"
-"	add	%1, %0				\n"
-"	movco.l	%0, @%2				\n"
-"	bf	1b				\n"
-	: "=&z" (tmp)
-	: "r" (i), "r" (&v->counter)
-	: "t");
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-"1:	movli.l @%2, %0		! atomic_sub	\n"
-"	sub	%1, %0				\n"
-"	movco.l	%0, @%2				\n"
-"	bf	1b				\n"
-	: "=&z" (tmp)
-	: "r" (i), "r" (&v->counter)
-	: "t");
-}
-
-/*
- * SH-4A note:
- *
- * We basically get atomic_xxx_return() for free compared with
- * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
- * encoding, so the retval is automatically set without having to
- * do any special work.
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long temp;
-
-	__asm__ __volatile__ (
-"1:	movli.l @%2, %0		! atomic_add_return	\n"
-"	add	%1, %0					\n"
-"	movco.l	%0, @%2					\n"
-"	bf	1b					\n"
-"	synco						\n"
-	: "=&z" (temp)
-	: "r" (i), "r" (&v->counter)
-	: "t");
-
-	return temp;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long temp;
-
-	__asm__ __volatile__ (
-"1:	movli.l @%2, %0		! atomic_sub_return	\n"
-"	sub	%1, %0					\n"
-"	movco.l	%0, @%2					\n"
-"	bf	1b					\n"
-"	synco						\n"
-	: "=&z" (temp)
-	: "r" (i), "r" (&v->counter)
-	: "t");
-
-	return temp;
-}
-
-static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-"1:	movli.l @%2, %0		! atomic_clear_mask	\n"
-"	and	%1, %0					\n"
-"	movco.l	%0, @%2					\n"
-"	bf	1b					\n"
-	: "=&z" (tmp)
-	: "r" (~mask), "r" (&v->counter)
-	: "t");
-}
-
-static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-"1:	movli.l @%2, %0		! atomic_set_mask	\n"
-"	or	%1, %0					\n"
-"	movco.l	%0, @%2					\n"
-"	bf	1b					\n"
-	: "=&z" (tmp)
-	: "r" (mask), "r" (&v->counter)
-	: "t");
-}
-
-#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h
deleted file mode 100644
index c043ef003028..000000000000
--- a/include/asm-sh/atomic.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef __ASM_SH_ATOMIC_H
-#define __ASM_SH_ATOMIC_H
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- *
- */
-
-typedef struct { volatile int counter; } atomic_t;
-
-#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
-
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v,i)		((v)->counter = (i))
-
-#include <linux/compiler.h>
-#include <asm/system.h>
-
-#if defined(CONFIG_GUSA_RB)
-#include <asm/atomic-grb.h>
-#elif defined(CONFIG_CPU_SH4A)
-#include <asm/atomic-llsc.h>
-#else
-#include <asm/atomic-irq.h>
-#endif
-
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic_inc_return(v) atomic_add_return(1,(v))
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc(v) atomic_add(1,(v))
-#define atomic_dec(v) atomic_sub(1,(v))
-
-#ifndef CONFIG_GUSA_RB
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (ret != u)
-		v->counter += a;
-	local_irq_restore(flags);
-
-	return ret != u;
-}
-#endif
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/* Atomic operations are already serializing on SH */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* __ASM_SH_ATOMIC_H */
diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h
deleted file mode 100644
index a6b9d4f4859e..000000000000
--- a/include/asm-sh/auxvec.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __ASM_SH_AUXVEC_H
-#define __ASM_SH_AUXVEC_H
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them.
- */
-
-/*
- * This entry gives some information about the FPU initialization
- * performed by the kernel.
- */
-#define AT_FPUCW		18	/* Used FPU control word.  */
-
-#ifdef CONFIG_VSYSCALL
-/*
- * Only define this in the vsyscall case, the entry point to
- * the vsyscall page gets placed here. The kernel will attempt
- * to build a gate VMA we don't care about otherwise..
- */
-#define AT_SYSINFO_EHDR		33
-#endif
-
-/*
- * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
- * value is -1, then the cache doesn't exist.  Otherwise:
- *
- *    bit 0-3:	  Cache set-associativity; 0 means fully associative.
- *    bit 4-7:	  Log2 of cacheline size.
- *    bit 8-31:	  Size of the entire cache >> 8.
- */
-#define AT_L1I_CACHESHAPE	34
-#define AT_L1D_CACHESHAPE	35
-#define AT_L2_CACHESHAPE	36
-
-#endif /* __ASM_SH_AUXVEC_H */
diff --git a/include/asm-sh/bitops-grb.h b/include/asm-sh/bitops-grb.h
deleted file mode 100644
index a5907b94395b..000000000000
--- a/include/asm-sh/bitops-grb.h
+++ /dev/null
@@ -1,169 +0,0 @@
-#ifndef __ASM_SH_BITOPS_GRB_H
-#define __ASM_SH_BITOPS_GRB_H
-
-static inline void set_bit(int nr, volatile void * addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-	unsigned long tmp;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-
-        __asm__ __volatile__ (
-                "   .align 2              \n\t"
-                "   mova    1f,   r0      \n\t" /* r0 = end point */
-                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
-                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-                "   mov.l  @%1,   %0      \n\t" /* load  old value */
-                "   or      %2,   %0      \n\t" /* or */
-                "   mov.l   %0,   @%1     \n\t" /* store new value */
-                "1: mov     r1,   r15     \n\t" /* LOGOUT */
-                : "=&r" (tmp),
-                  "+r"  (a)
-                : "r"   (mask)
-                : "memory" , "r0", "r1");
-}
-
-static inline void clear_bit(int nr, volatile void * addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-        unsigned long tmp;
-
-	a += nr >> 5;
-        mask = ~(1 << (nr & 0x1f));
-        __asm__ __volatile__ (
-                "   .align 2              \n\t"
-                "   mova    1f,   r0      \n\t" /* r0 = end point */
-                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
-                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-                "   mov.l  @%1,   %0      \n\t" /* load  old value */
-                "   and     %2,   %0      \n\t" /* and */
-                "   mov.l   %0,   @%1     \n\t" /* store new value */
-                "1: mov     r1,   r15     \n\t" /* LOGOUT */
-                : "=&r" (tmp),
-                  "+r"  (a)
-                : "r"   (mask)
-                : "memory" , "r0", "r1");
-}
-
-static inline void change_bit(int nr, volatile void * addr)
-{
-        int     mask;
-        volatile unsigned int *a = addr;
-        unsigned long tmp;
-
-        a += nr >> 5;
-        mask = 1 << (nr & 0x1f);
-        __asm__ __volatile__ (
-                "   .align 2              \n\t"
-                "   mova    1f,   r0      \n\t" /* r0 = end point */
-                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
-                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
-                "   mov.l  @%1,   %0      \n\t" /* load  old value */
-                "   xor     %2,   %0      \n\t" /* xor */
-                "   mov.l   %0,   @%1     \n\t" /* store new value */
-                "1: mov     r1,   r15     \n\t" /* LOGOUT */
-                : "=&r" (tmp),
-                  "+r"  (a)
-                : "r"   (mask)
-                : "memory" , "r0", "r1");
-}
-
-static inline int test_and_set_bit(int nr, volatile void * addr)
-{
-        int     mask, retval;
-	volatile unsigned int *a = addr;
-        unsigned long tmp;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-
-        __asm__ __volatile__ (
-                "   .align 2              \n\t"
-                "   mova    1f,   r0      \n\t" /* r0 = end point */
-                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
-                "   mov   #-14,   r15     \n\t" /* LOGIN: r15 = size */
-                "   mov.l  @%2,   %0      \n\t" /* load old value */
-                "   mov     %0,   %1      \n\t"
-                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
-                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
-                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
-                "   or      %3,   %0      \n\t"
-                "   mov.l   %0,  @%2      \n\t" /* store new value */
-                "1: mov     r1,  r15      \n\t" /* LOGOUT */
-                : "=&r" (tmp),
-                  "=&r" (retval),
-                  "+r"  (a)
-                : "r"   (mask)
-                : "memory" , "r0", "r1" ,"t");
-
-        return retval;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void * addr)
-{
-        int     mask, retval,not_mask;
-        volatile unsigned int *a = addr;
-        unsigned long tmp;
-
-        a += nr >> 5;
-        mask = 1 << (nr & 0x1f);
-
-	not_mask = ~mask;
-
-        __asm__ __volatile__ (
-                "   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov   #-14,   r15     \n\t" /* LOGIN */
-		"   mov.l  @%2,   %0      \n\t" /* load old value */
-                "   mov     %0,   %1      \n\t" /* %1 = *a */
-                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
-		"   mov    #-1,   %1      \n\t" /* retvat = -1 */
-                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
-                "   and     %4,   %0      \n\t"
-                "   mov.l   %0,  @%2      \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (tmp),
-		  "=&r" (retval),
-		  "+r"  (a)
-		: "r"   (mask),
-		  "r"   (not_mask)
-		: "memory" , "r0", "r1", "t");
-
-        return retval;
-}
-
-static inline int test_and_change_bit(int nr, volatile void * addr)
-{
-        int     mask, retval;
-        volatile unsigned int *a = addr;
-        unsigned long tmp;
-
-        a += nr >> 5;
-        mask = 1 << (nr & 0x1f);
-
-        __asm__ __volatile__ (
-                "   .align 2              \n\t"
-                "   mova    1f,   r0      \n\t" /* r0 = end point */
-                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
-                "   mov   #-14,   r15     \n\t" /* LOGIN */
-                "   mov.l  @%2,   %0      \n\t" /* load old value */
-                "   mov     %0,   %1      \n\t" /* %1 = *a */
-                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
-                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
-                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
-                "   xor     %3,   %0      \n\t"
-                "   mov.l   %0,  @%2      \n\t" /* store new value */
-                "1: mov     r1,   r15     \n\t" /* LOGOUT */
-                : "=&r" (tmp),
-                  "=&r" (retval),
-                  "+r"  (a)
-                : "r"   (mask)
-                : "memory" , "r0", "r1", "t");
-
-        return retval;
-}
-#endif /* __ASM_SH_BITOPS_GRB_H */
diff --git a/include/asm-sh/bitops-irq.h b/include/asm-sh/bitops-irq.h
deleted file mode 100644
index 653a12750584..000000000000
--- a/include/asm-sh/bitops-irq.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef __ASM_SH_BITOPS_IRQ_H
-#define __ASM_SH_BITOPS_IRQ_H
-
-static inline void set_bit(int nr, volatile void *addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	*a |= mask;
-	local_irq_restore(flags);
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	*a &= ~mask;
-	local_irq_restore(flags);
-}
-
-static inline void change_bit(int nr, volatile void *addr)
-{
-	int	mask;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	*a ^= mask;
-	local_irq_restore(flags);
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
-	int	mask, retval;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	retval = (mask & *a) != 0;
-	*a |= mask;
-	local_irq_restore(flags);
-
-	return retval;
-}
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
-	int	mask, retval;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	retval = (mask & *a) != 0;
-	*a &= ~mask;
-	local_irq_restore(flags);
-
-	return retval;
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
-	int	mask, retval;
-	volatile unsigned int *a = addr;
-	unsigned long flags;
-
-	a += nr >> 5;
-	mask = 1 << (nr & 0x1f);
-	local_irq_save(flags);
-	retval = (mask & *a) != 0;
-	*a ^= mask;
-	local_irq_restore(flags);
-
-	return retval;
-}
-
-#endif /* __ASM_SH_BITOPS_IRQ_H */
diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h
deleted file mode 100644
index d7d382f63ee5..000000000000
--- a/include/asm-sh/bitops.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef __ASM_SH_BITOPS_H
-#define __ASM_SH_BITOPS_H
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <asm/system.h>
-/* For __swab32 */
-#include <asm/byteorder.h>
-
-#ifdef CONFIG_GUSA_RB
-#include <asm/bitops-grb.h>
-#else
-#include <asm/bitops-irq.h>
-#endif
-
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#ifdef CONFIG_SUPERH32
-static inline unsigned long ffz(unsigned long word)
-{
-	unsigned long result;
-
-	__asm__("1:\n\t"
-		"shlr	%1\n\t"
-		"bt/s	1b\n\t"
-		" add	#1, %0"
-		: "=r" (result), "=r" (word)
-		: "0" (~0L), "1" (word)
-		: "t");
-	return result;
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
-	unsigned long result;
-
-	__asm__("1:\n\t"
-		"shlr	%1\n\t"
-		"bf/s	1b\n\t"
-		" add	#1, %0"
-		: "=r" (result), "=r" (word)
-		: "0" (~0L), "1" (word)
-		: "t");
-	return result;
-}
-#else
-static inline unsigned long ffz(unsigned long word)
-{
-	unsigned long result, __d2, __d3;
-
-        __asm__("gettr  tr0, %2\n\t"
-                "pta    $+32, tr0\n\t"
-                "andi   %1, 1, %3\n\t"
-                "beq    %3, r63, tr0\n\t"
-                "pta    $+4, tr0\n"
-                "0:\n\t"
-                "shlri.l        %1, 1, %1\n\t"
-                "addi   %0, 1, %0\n\t"
-                "andi   %1, 1, %3\n\t"
-                "beqi   %3, 1, tr0\n"
-                "1:\n\t"
-                "ptabs  %2, tr0\n\t"
-                : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
-                : "0" (0L), "1" (word));
-
-	return result;
-}
-
-#include <asm-generic/bitops/__ffs.h>
-#endif
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/minix.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_BITOPS_H */
diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h
deleted file mode 100644
index c01718040166..000000000000
--- a/include/asm-sh/bug.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __ASM_SH_BUG_H
-#define __ASM_SH_BUG_H
-
-#define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
-
-#ifdef CONFIG_GENERIC_BUG
-#define HAVE_ARCH_BUG
-#define HAVE_ARCH_WARN_ON
-
-/**
- * _EMIT_BUG_ENTRY
- * %1 - __FILE__
- * %2 - __LINE__
- * %3 - trap type
- * %4 - sizeof(struct bug_entry)
- *
- * The trapa opcode itself sits in %0.
- * The %O notation is used to avoid # generation.
- *
- * The offending file and line are encoded in the __bug_table section.
- */
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define _EMIT_BUG_ENTRY				\
-	"\t.pushsection __bug_table,\"a\"\n"	\
-	"2:\t.long 1b, %O1\n"			\
-	"\t.short %O2, %O3\n"			\
-	"\t.org 2b+%O4\n"			\
-	"\t.popsection\n"
-#else
-#define _EMIT_BUG_ENTRY				\
-	"\t.pushsection __bug_table,\"a\"\n"	\
-	"2:\t.long 1b\n"			\
-	"\t.short %O3\n"			\
-	"\t.org 2b+%O4\n"			\
-	"\t.popsection\n"
-#endif
-
-#define BUG()						\
-do {							\
-	__asm__ __volatile__ (				\
-		"1:\t.short %O0\n"			\
-		_EMIT_BUG_ENTRY				\
-		 :					\
-		 : "n" (TRAPA_BUG_OPCODE),		\
-		   "i" (__FILE__),			\
-		   "i" (__LINE__), "i" (0),		\
-		   "i" (sizeof(struct bug_entry)));	\
-} while (0)
-
-#define __WARN()					\
-do {							\
-	__asm__ __volatile__ (				\
-		"1:\t.short %O0\n"			\
-		 _EMIT_BUG_ENTRY			\
-		 :					\
-		 : "n" (TRAPA_BUG_OPCODE),		\
-		   "i" (__FILE__),			\
-		   "i" (__LINE__),			\
-		   "i" (BUGFLAG_WARNING),		\
-		   "i" (sizeof(struct bug_entry)));	\
-} while (0)
-
-#define WARN_ON(x) ({						\
-	int __ret_warn_on = !!(x);				\
-	if (__builtin_constant_p(__ret_warn_on)) {		\
-		if (__ret_warn_on)				\
-			__WARN();				\
-	} else {						\
-		if (unlikely(__ret_warn_on))			\
-			__WARN();				\
-	}							\
-	unlikely(__ret_warn_on);				\
-})
-
-#endif /* CONFIG_GENERIC_BUG */
-
-#include <asm-generic/bug.h>
-
-#endif /* __ASM_SH_BUG_H */
diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h
deleted file mode 100644
index 121b2ecddfc3..000000000000
--- a/include/asm-sh/bugs.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef __ASM_SH_BUGS_H
-#define __ASM_SH_BUGS_H
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any Super-H bugs yet.
- */
-
-#include <asm/processor.h>
-
-static void __init check_bugs(void)
-{
-	extern unsigned long loops_per_jiffy;
-	char *p = &init_utsname()->machine[2]; /* "sh" */
-
-	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
-
-	switch (current_cpu_data.type) {
-	case CPU_SH7619:
-		*p++ = '2';
-		break;
-	case CPU_SH7203 ... CPU_MXG:
-		*p++ = '2';
-		*p++ = 'a';
-		break;
-	case CPU_SH7705 ... CPU_SH7729:
-		*p++ = '3';
-		break;
-	case CPU_SH7750 ... CPU_SH4_501:
-		*p++ = '4';
-		break;
-	case CPU_SH7763 ... CPU_SHX3:
-		*p++ = '4';
-		*p++ = 'a';
-		break;
-	case CPU_SH7343 ... CPU_SH7366:
-		*p++ = '4';
-		*p++ = 'a';
-		*p++ = 'l';
-		*p++ = '-';
-		*p++ = 'd';
-		*p++ = 's';
-		*p++ = 'p';
-		break;
-	case CPU_SH5_101 ... CPU_SH5_103:
-		*p++ = '6';
-		*p++ = '4';
-		break;
-	case CPU_SH_NONE:
-		/*
-		 * Specifically use CPU_SH_NONE rather than default:,
-		 * so we're able to have the compiler whine about
-		 * unhandled enumerations.
-		 */
-		break;
-	}
-
-	printk("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
-
-#ifndef __LITTLE_ENDIAN__
-	/* 'eb' means 'Endian Big' */
-	*p++ = 'e';
-	*p++ = 'b';
-#endif
-	*p = '\0';
-}
-#endif /* __ASM_SH_BUGS_H */
diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h
deleted file mode 100644
index 4c13e6117563..000000000000
--- a/include/asm-sh/byteorder.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ASM_SH_BYTEORDER_H
-#define __ASM_SH_BYTEORDER_H
-
-/*
- * Copyright (C) 1999  Niibe Yutaka
- * Copyright (C) 2000, 2001  Paolo Alberelli
- */
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-	__asm__(
-#ifdef __SH5__
-		"byterev	%0, %0\n\t"
-		"shari		%0, 32, %0"
-#else
-		"swap.b		%0, %0\n\t"
-		"swap.w		%0, %0\n\t"
-		"swap.b		%0, %0"
-#endif
-		: "=r" (x)
-		: "0" (x));
-
-	return x;
-}
-
-static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
-{
-	__asm__(
-#ifdef __SH5__
-		"byterev	%0, %0\n\t"
-		"shari		%0, 32, %0"
-#else
-		"swap.b		%0, %0"
-#endif
-		: "=r" (x)
-		:  "0" (x));
-
-	return x;
-}
-
-static inline __u64 ___arch__swab64(__u64 val)
-{
-	union {
-		struct { __u32 a,b; } s;
-		__u64 u;
-	} v, w;
-	v.u = val;
-	w.s.b = ___arch__swab32(v.s.a);
-	w.s.a = ___arch__swab32(v.s.b);
-	return w.u;
-}
-
-#define __arch__swab64(x) ___arch__swab64(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#ifdef __LITTLE_ENDIAN__
-#include <linux/byteorder/little_endian.h>
-#else
-#include <linux/byteorder/big_endian.h>
-#endif
-
-#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
deleted file mode 100644
index 083419f47c65..000000000000
--- a/include/asm-sh/cache.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
- *
- * include/asm-sh/cache.h
- *
- * Copyright 1999 (C) Niibe Yutaka
- * Copyright 2002, 2003 (C) Paul Mundt
- */
-#ifndef __ASM_SH_CACHE_H
-#define __ASM_SH_CACHE_H
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <asm/cpu/cache.h>
-
-#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
-#ifndef __ASSEMBLY__
-struct cache_info {
-	unsigned int ways;		/* Number of cache ways */
-	unsigned int sets;		/* Number of cache sets */
-	unsigned int linesz;		/* Cache line size (bytes) */
-
-	unsigned int way_size;		/* sets * line size */
-
-	/*
-	 * way_incr is the address offset for accessing the next way
-	 * in memory mapped cache array ops.
-	 */
-	unsigned int way_incr;
-	unsigned int entry_shift;
-	unsigned int entry_mask;
-
-	/*
-	 * Compute a mask which selects the address bits which overlap between
-	 * 1. those used to select the cache set during indexing
-	 * 2. those in the physical page number.
-	 */
-	unsigned int alias_mask;
-
-	unsigned int n_aliases;		/* Number of aliases */
-
-	unsigned long flags;
-};
-
-int __init detect_cpu_and_cache_system(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_CACHE_H */
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
deleted file mode 100644
index e034c3604111..000000000000
--- a/include/asm-sh/cacheflush.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef __ASM_SH_CACHEFLUSH_H
-#define __ASM_SH_CACHEFLUSH_H
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_CACHE_OFF
-/*
- * Nothing to do when the cache is disabled, initial flush and explicit
- * disabling is handled at CPU init time.
- *
- * See arch/sh/kernel/cpu/init.c:cache_init().
- */
-#define p3_cache_init()				do { } while (0)
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
-#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
-#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
-#else
-#include <asm/cpu/cacheflush.h>
-
-/*
- * Consistent DMA requires that the __flush_xxx() primitives must be set
- * for any of the enabled non-coherent caches (most of the UP CPUs),
- * regardless of PIPT or VIPT cache configurations.
- */
-
-/* Flush (write-back only) a region (smaller than a page) */
-extern void __flush_wback_region(void *start, int size);
-/* Flush (write-back & invalidate) a region (smaller than a page) */
-extern void __flush_purge_region(void *start, int size);
-/* Flush (invalidate only) a region (smaller than a page) */
-extern void __flush_invalidate_region(void *start, int size);
-#endif
-
-#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-static inline void flush_kernel_dcache_page(struct page *page)
-{
-	flush_dcache_page(page);
-}
-
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
-extern void copy_to_user_page(struct vm_area_struct *vma,
-	struct page *page, unsigned long vaddr, void *dst, const void *src,
-	unsigned long len);
-
-extern void copy_from_user_page(struct vm_area_struct *vma,
-	struct page *page, unsigned long vaddr, void *dst, const void *src,
-	unsigned long len);
-#else
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-		flush_icache_user_range(vma, page, vaddr, len);	\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-	} while (0)
-#endif
-
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
-
-#define HAVE_ARCH_UNMAPPED_AREA
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h
deleted file mode 100644
index 67496ab0ef04..000000000000
--- a/include/asm-sh/checksum.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_SUPERH32
-# include "checksum_32.h"
-#else
-# include "checksum_64.h"
-#endif
diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h
deleted file mode 100644
index 14b7ac2f0a07..000000000000
--- a/include/asm-sh/checksum_32.h
+++ /dev/null
@@ -1,215 +0,0 @@
-#ifndef __ASM_SH_CHECKSUM_H
-#define __ASM_SH_CHECKSUM_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
- */
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
-					    int len, __wsum sum,
-					    int *src_err_ptr, int *dst_err_ptr);
-
-/*
- *	Note: when you get a NULL pointer exception here this means someone
- *	passed in an incorrect kernel address to one of these functions.
- *
- *	If you use these functions directly please don't forget the
- *	access_ok().
- */
-static inline
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-				 int len, __wsum sum)
-{
-	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
-}
-
-static inline
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-				   int len, __wsum sum, int *err_ptr)
-{
-	return csum_partial_copy_generic((__force const void *)src, dst,
-					len, sum, err_ptr, NULL);
-}
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int __dummy;
-	__asm__("swap.w %0, %1\n\t"
-		"extu.w	%0, %0\n\t"
-		"extu.w	%1, %1\n\t"
-		"add	%1, %0\n\t"
-		"swap.w	%0, %1\n\t"
-		"add	%1, %0\n\t"
-		"not	%0, %0\n\t"
-		: "=r" (sum), "=&r" (__dummy)
-		: "0" (sum)
-		: "t");
-	return (__force __sum16)sum;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- *      i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
- *      for linux by * Arnt Gulbrandsen.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int sum, __dummy0, __dummy1;
-
-	__asm__ __volatile__(
-		"mov.l	@%1+, %0\n\t"
-		"mov.l	@%1+, %3\n\t"
-		"add	#-2, %2\n\t"
-		"clrt\n\t"
-		"1:\t"
-		"addc	%3, %0\n\t"
-		"movt	%4\n\t"
-		"mov.l	@%1+, %3\n\t"
-		"dt	%2\n\t"
-		"bf/s	1b\n\t"
-		" cmp/eq #1, %4\n\t"
-		"addc	%3, %0\n\t"
-		"addc	%2, %0"	    /* Here %2 is 0, add carry-bit */
-	/* Since the input registers which are loaded with iph and ihl
-	   are modified, we must also specify them as outputs, or gcc
-	   will assume they contain their original values. */
-	: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
-	: "1" (iph), "2" (ihl)
-	: "t", "memory");
-
-	return	csum_fold(sum);
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum)
-{
-#ifdef __LITTLE_ENDIAN__
-	unsigned long len_proto = (proto + len) << 8;
-#else
-	unsigned long len_proto = proto + len;
-#endif
-	__asm__("clrt\n\t"
-		"addc	%0, %1\n\t"
-		"addc	%2, %1\n\t"
-		"addc	%3, %1\n\t"
-		"movt	%0\n\t"
-		"add	%1, %0"
-		: "=r" (sum), "=r" (len_proto)
-		: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
-		: "t");
-
-	return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-    return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
-{
-	unsigned int __dummy;
-	__asm__("clrt\n\t"
-		"mov.l	@(0,%2), %1\n\t"
-		"addc	%1, %0\n\t"
-		"mov.l	@(4,%2), %1\n\t"
-		"addc	%1, %0\n\t"
-		"mov.l	@(8,%2), %1\n\t"
-		"addc	%1, %0\n\t"
-		"mov.l	@(12,%2), %1\n\t"
-		"addc	%1, %0\n\t"
-		"mov.l	@(0,%3), %1\n\t"
-		"addc	%1, %0\n\t"
-		"mov.l	@(4,%3), %1\n\t"
-		"addc	%1, %0\n\t"
-		"mov.l	@(8,%3), %1\n\t"
-		"addc	%1, %0\n\t"
-		"mov.l	@(12,%3), %1\n\t"
-		"addc	%1, %0\n\t"
-		"addc	%4, %0\n\t"
-		"addc	%5, %0\n\t"
-		"movt	%1\n\t"
-		"add	%1, %0\n"
-		: "=r" (sum), "=&r" (__dummy)
-		: "r" (saddr), "r" (daddr),
-		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
-		: "t");
-
-	return csum_fold(sum);
-}
-
-/*
- *	Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-static inline __wsum csum_and_copy_to_user(const void *src,
-					   void __user *dst,
-					   int len, __wsum sum,
-					   int *err_ptr)
-{
-	if (access_ok(VERIFY_WRITE, dst, len))
-		return csum_partial_copy_generic((__force const void *)src,
-						dst, len, sum, NULL, err_ptr);
-
-	if (len)
-		*err_ptr = -EFAULT;
-
-	return (__force __wsum)-1; /* invalid checksum */
-}
-#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/include/asm-sh/checksum_64.h b/include/asm-sh/checksum_64.h
deleted file mode 100644
index 9c62a031a8f5..000000000000
--- a/include/asm-sh/checksum_64.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef __ASM_SH_CHECKSUM_64_H
-#define __ASM_SH_CHECKSUM_64_H
-
-/*
- * include/asm-sh/checksum_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- *	Note: when you get a NULL pointer exception here this means someone
- *	passed in an incorrect kernel address to one of these functions.
- *
- *	If you use these functions directly please don't forget the
- *	access_ok().
- */
-
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len,
-				       __wsum sum);
-
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					 int len, __wsum sum, int *err_ptr);
-
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-        sum = (sum & 0xffff) + (sum >> 16);
-        sum = (sum & 0xffff) + (sum >> 16);
-        return (__force __sum16)~sum;
-}
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				 unsigned short len, unsigned short proto,
-				 __wsum sum);
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#endif /* __ASM_SH_CHECKSUM_64_H */
diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h
deleted file mode 100644
index b550a27a7042..000000000000
--- a/include/asm-sh/clock.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_CLOCK_H
-#define __ASM_SH_CLOCK_H
-
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/clk.h>
-
-struct clk;
-
-struct clk_ops {
-	void (*init)(struct clk *clk);
-	void (*enable)(struct clk *clk);
-	void (*disable)(struct clk *clk);
-	void (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
-	long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-struct clk {
-	struct list_head	node;
-	const char		*name;
-	int			id;
-	struct module		*owner;
-
-	struct clk		*parent;
-	struct clk_ops		*ops;
-
-	struct kref		kref;
-
-	unsigned long		rate;
-	unsigned long		flags;
-};
-
-#define CLK_ALWAYS_ENABLED	(1 << 0)
-#define CLK_RATE_PROPAGATES	(1 << 1)
-
-/* Should be defined by processor-specific code */
-void arch_init_clk_ops(struct clk_ops **, int type);
-
-/* arch/sh/kernel/cpu/clock.c */
-int clk_init(void);
-
-int __clk_enable(struct clk *);
-void __clk_disable(struct clk *);
-
-void clk_recalc_rate(struct clk *);
-
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-
-/* the exported API, in addition to clk_set_rate */
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
-	NO_CHANGE = 0,
-
-	IUS_N1_N1,
-	IUS_322,
-	IUS_522,
-	IUS_N11,
-
-	SB_N1,
-
-	SB3_N1,
-	SB3_32,
-	SB3_43,
-	SB3_54,
-
-	BP_N1,
-
-	IP_N1,
-};
-#endif /* __ASM_SH_CLOCK_H */
diff --git a/include/asm-sh/cmpxchg-grb.h b/include/asm-sh/cmpxchg-grb.h
deleted file mode 100644
index e2681abe764f..000000000000
--- a/include/asm-sh/cmpxchg-grb.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ASM_SH_CMPXCHG_GRB_H
-#define __ASM_SH_CMPXCHG_GRB_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
-	unsigned long retval;
-
-	__asm__ __volatile__ (
-		"   .align 2              \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   nop                   \n\t"
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-4,   r15     \n\t" /* LOGIN */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   mov.l   %2,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (retval),
-		  "+r"  (m)
-		: "r"   (val)
-		: "memory", "r0", "r1");
-
-	return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
-	unsigned long retval;
-
-	__asm__ __volatile__ (
-		"   .align  2             \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-6,   r15     \n\t" /* LOGIN */
-		"   mov.b  @%1,   %0      \n\t" /* load  old value */
-		"   extu.b  %0,   %0      \n\t" /* extend as unsigned */
-		"   mov.b   %2,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (retval),
-		  "+r"  (m)
-		: "r"   (val)
-		: "memory" , "r0", "r1");
-
-	return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
-					  unsigned long new)
-{
-	unsigned long retval;
-
-	__asm__ __volatile__ (
-		"   .align  2             \n\t"
-		"   mova    1f,   r0      \n\t" /* r0 = end point */
-		"   nop                   \n\t"
-		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
-		"   mov    #-8,   r15     \n\t" /* LOGIN */
-		"   mov.l  @%1,   %0      \n\t" /* load  old value */
-		"   cmp/eq  %0,   %2      \n\t"
-		"   bf            1f      \n\t" /* if not equal */
-		"   mov.l   %2,   @%1     \n\t" /* store new value */
-		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (retval),
-		  "+r"  (m)
-		: "r"   (new)
-		: "memory" , "r0", "r1", "t");
-
-	return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_GRB_H */
diff --git a/include/asm-sh/cmpxchg-irq.h b/include/asm-sh/cmpxchg-irq.h
deleted file mode 100644
index 43049ec0554b..000000000000
--- a/include/asm-sh/cmpxchg-irq.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef __ASM_SH_CMPXCHG_IRQ_H
-#define __ASM_SH_CMPXCHG_IRQ_H
-
-static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
-{
-	unsigned long flags, retval;
-
-	local_irq_save(flags);
-	retval = *m;
-	*m = val;
-	local_irq_restore(flags);
-	return retval;
-}
-
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
-	unsigned long flags, retval;
-
-	local_irq_save(flags);
-	retval = *m;
-	*m = val & 0xff;
-	local_irq_restore(flags);
-	return retval;
-}
-
-static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
-	unsigned long new)
-{
-	__u32 retval;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	retval = *m;
-	if (retval == old)
-		*m = new;
-	local_irq_restore(flags);       /* implies memory barrier  */
-	return retval;
-}
-
-#endif /* __ASM_SH_CMPXCHG_IRQ_H */
diff --git a/include/asm-sh/cpu-features.h b/include/asm-sh/cpu-features.h
deleted file mode 100644
index 86308aa39731..000000000000
--- a/include/asm-sh/cpu-features.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_SH_CPU_FEATURES_H
-#define __ASM_SH_CPU_FEATURES_H
-
-/*
- * Processor flags
- *
- * Note: When adding a new flag, keep cpu_flags[] in
- * arch/sh/kernel/setup.c in sync so symbolic name
- * mapping of the processor flags has a chance of being
- * reasonably accurate.
- *
- * These flags are also available through the ELF
- * auxiliary vector as AT_HWCAP.
- */
-#define CPU_HAS_FPU		0x0001	/* Hardware FPU support */
-#define CPU_HAS_P2_FLUSH_BUG	0x0002	/* Need to flush the cache in P2 area */
-#define CPU_HAS_MMU_PAGE_ASSOC	0x0004	/* SH3: TLB way selection bit support */
-#define CPU_HAS_DSP		0x0008	/* SH-DSP: DSP support */
-#define CPU_HAS_PERF_COUNTER	0x0010	/* Hardware performance counters */
-#define CPU_HAS_PTEA		0x0020	/* PTEA register */
-#define CPU_HAS_LLSC		0x0040	/* movli.l/movco.l */
-#define CPU_HAS_L2_CACHE	0x0080	/* Secondary cache / URAM */
-#define CPU_HAS_OP32		0x0100	/* 32-bit instruction support */
-
-#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/include/asm-sh/cpu-sh2/addrspace.h
deleted file mode 100644
index 2b9ab93efa4e..000000000000
--- a/include/asm-sh/cpu-sh2/addrspace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Definitions for the address spaces of the SH-2 CPUs.
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_ADDRSPACE_H
-#define __ASM_CPU_SH2_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h
deleted file mode 100644
index 4e0b16500686..000000000000
--- a/include/asm-sh/cpu-sh2/cache.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/cache.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_CACHE_H
-#define __ASM_CPU_SH2_CACHE_H
-
-#define L1_CACHE_SHIFT	4
-
-#define SH_CACHE_VALID		1
-#define SH_CACHE_UPDATED	2
-#define SH_CACHE_COMBINED	4
-#define SH_CACHE_ASSOC		8
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define CCR		0xffffffec
-
-#define CCR_CACHE_CE	0x01	/* Cache enable */
-#define CCR_CACHE_WT	0x06    /* CCR[bit1=1,bit2=1] */
-				/* 0x00000000-0x7fffffff: Write-through  */
-				/* 0x80000000-0x9fffffff: Write-back     */
-                                /* 0xc0000000-0xdfffffff: Write-through  */
-#define CCR_CACHE_CB	0x00    /* CCR[bit1=0,bit2=0] */
-				/* 0x00000000-0x7fffffff: Write-back     */
-				/* 0x80000000-0x9fffffff: Write-through  */
-                                /* 0xc0000000-0xdfffffff: Write-back     */
-#define CCR_CACHE_CF	0x08	/* Cache invalidate */
-
-#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
-#define CACHE_OC_DATA_ARRAY	0xf1000000
-
-#define CCR_CACHE_ENABLE	CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
-#endif
-
-#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/include/asm-sh/cpu-sh2/cacheflush.h
deleted file mode 100644
index 2979efb26de3..000000000000
--- a/include/asm-sh/cpu-sh2/cacheflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/cacheflush.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
-#define __ASM_CPU_SH2_CACHEFLUSH_H
-
-/* 
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-2, so
- *  we don't need them.
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
-
diff --git a/include/asm-sh/cpu-sh2/dma.h b/include/asm-sh/cpu-sh2/dma.h
deleted file mode 100644
index d66b43cdc637..000000000000
--- a/include/asm-sh/cpu-sh2/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Definitions for the SH-2 DMAC.
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_DMA_H
-#define __ASM_CPU_SH2_DMA_H
-
-#define SH_MAX_DMA_CHANNELS	2
-
-#define SAR	((unsigned long[]){ 0xffffff80, 0xffffff90 })
-#define DAR	((unsigned long[]){ 0xffffff84, 0xffffff94 })
-#define DMATCR	((unsigned long[]){ 0xffffff88, 0xffffff98 })
-#define CHCR	((unsigned long[]){ 0xfffffffc, 0xffffff9c })
-
-#define DMAOR	0xffffffb0
-
-#endif /* __ASM_CPU_SH2_DMA_H */
-
diff --git a/include/asm-sh/cpu-sh2/freq.h b/include/asm-sh/cpu-sh2/freq.h
deleted file mode 100644
index 31de475da70b..000000000000
--- a/include/asm-sh/cpu-sh2/freq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/freq.h
- *
- * Copyright (C) 2006  Yoshinori Sato
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_FREQ_H
-#define __ASM_CPU_SH2_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define FREQCR	0xf815ff80
-#endif
-
-#endif /* __ASM_CPU_SH2_FREQ_H */
-
diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/include/asm-sh/cpu-sh2/mmu_context.h
deleted file mode 100644
index beeb299e01ec..000000000000
--- a/include/asm-sh/cpu-sh2/mmu_context.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/mmu_context.h
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
-#define __ASM_CPU_SH2_MMU_CONTEXT_H
-
-/* No MMU */
-
-#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
-
diff --git a/include/asm-sh/cpu-sh2/rtc.h b/include/asm-sh/cpu-sh2/rtc.h
deleted file mode 100644
index 39e2d6e94782..000000000000
--- a/include/asm-sh/cpu-sh2/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH2_RTC_H
-#define __ASM_SH_CPU_SH2_RTC_H
-
-#define rtc_reg_size		sizeof(u16)
-#define RTC_BIT_INVERTED	0
-#define RTC_DEF_CAPABILITIES	0UL
-
-#endif /* __ASM_SH_CPU_SH2_RTC_H */
diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/include/asm-sh/cpu-sh2/sigcontext.h
deleted file mode 100644
index fe5c15dd6e87..000000000000
--- a/include/asm-sh/cpu-sh2/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
-#define __ASM_CPU_SH2_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-	/* CPU registers */
-	unsigned long sc_regs[16];
-	unsigned long sc_pc;
-	unsigned long sc_pr;
-	unsigned long sc_sr;
-	unsigned long sc_gbr;
-	unsigned long sc_mach;
-	unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh2/timer.h b/include/asm-sh/cpu-sh2/timer.h
deleted file mode 100644
index a39c241e8195..000000000000
--- a/include/asm-sh/cpu-sh2/timer.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_CPU_SH2_TIMER_H
-#define __ASM_CPU_SH2_TIMER_H
-
-/* Nothing needed yet */
-
-#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/include/asm-sh/cpu-sh2/ubc.h b/include/asm-sh/cpu-sh2/ubc.h
deleted file mode 100644
index ba0e87f19c7a..000000000000
--- a/include/asm-sh/cpu-sh2/ubc.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/ubc.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_UBC_H
-#define __ASM_CPU_SH2_UBC_H
-
-#define UBC_BARA                0xffffff40
-#define UBC_BAMRA               0xffffff44
-#define UBC_BBRA                0xffffff48
-#define UBC_BARB                0xffffff60
-#define UBC_BAMRB               0xffffff64
-#define UBC_BBRB                0xffffff68
-#define UBC_BDRB                0xffffff70
-#define UBC_BDMRB               0xffffff74
-#define UBC_BRCR                0xffffff78
-
-/*
- * We don't have any ASID changes to make in the UBC on the SH-2.
- *
- * Make these purposely invalid to track misuse.
- */
-#define UBC_BASRA		0x00000000
-#define UBC_BASRB		0x00000000
-
-#endif /* __ASM_CPU_SH2_UBC_H */
-
diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/include/asm-sh/cpu-sh2/watchdog.h
deleted file mode 100644
index 393161c9c6d0..000000000000
--- a/include/asm-sh/cpu-sh2/watchdog.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_WATCHDOG_H
-#define __ASM_CPU_SH2_WATCHDOG_H
-
-/*
- * More SH-2 brilliance .. its not good enough that we can't read
- * and write the same sizes to WTCNT, now we have to read and write
- * with different sizes at different addresses for WTCNT _and_ RSTCSR.
- *
- * At least on the bright side no one has managed to screw over WTCSR
- * in this fashion .. yet.
- */
-/* Register definitions */
-#define WTCNT		0xfffffe80
-#define WTCSR		0xfffffe80
-#define RSTCSR		0xfffffe82
-
-#define WTCNT_R		(WTCNT + 1)
-#define RSTCSR_R	(RSTCSR + 1)
-
-/* Bit definitions */
-#define WTCSR_IOVF	0x80
-#define WTCSR_WT	0x40
-#define WTCSR_TME	0x20
-#define WTCSR_RSTS	0x00
-
-#define RSTCSR_RSTS	0x20
-
-/**
- * 	sh_wdt_read_rstcsr - Read from Reset Control/Status Register
- *
- *	Reads back the RSTCSR value.
- */
-static inline __u8 sh_wdt_read_rstcsr(void)
-{
-	/*
-	 * Same read/write brain-damage as for WTCNT here..
-	 */
-	return ctrl_inb(RSTCSR_R);
-}
-
-/**
- * 	sh_wdt_write_csr - Write to Reset Control/Status Register
- *
- * 	@val: Value to write
- *
- * 	Writes the given value @val to the lower byte of the control/status
- * 	register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_rstcsr(__u8 val)
-{
-	/*
-	 * Note: Due to the brain-damaged nature of this register,
-	 * we can't presently touch the WOVF bit, since the upper byte
-	 * has to be swapped for this. So just leave it alone..
-	 */
-	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
-}
-
-#endif /* __ASM_CPU_SH2_WATCHDOG_H */
-
diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h
deleted file mode 100644
index 795ddd6856a3..000000000000
--- a/include/asm-sh/cpu-sh2a/addrspace.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x00000000
-#define P2SEG		0x20000000
-#define P3SEG		0x00000000
-#define P4SEG		0x80000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h
deleted file mode 100644
index afe228b3f493..000000000000
--- a/include/asm-sh/cpu-sh2a/cache.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2a/cache.h
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2A_CACHE_H
-#define __ASM_CPU_SH2A_CACHE_H
-
-#define L1_CACHE_SHIFT	4
-
-#define SH_CACHE_VALID		1
-#define SH_CACHE_UPDATED	2
-#define SH_CACHE_COMBINED	4
-#define SH_CACHE_ASSOC		8
-
-#define CCR		0xfffc1000 /* CCR1 */
-#define CCR2		0xfffc1004
-
-/*
- * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
- * listed here are reserved.
- */
-#define CCR_CACHE_CB	0x0000	/* Hack */
-#define CCR_CACHE_OCE	0x0001
-#define CCR_CACHE_WT	0x0002
-#define CCR_CACHE_OCI	0x0008	/* OCF */
-#define CCR_CACHE_ICE	0x0100
-#define CCR_CACHE_ICI	0x0800	/* ICF */
-
-#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY	0xf0800000
-
-#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
-
-#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h
deleted file mode 100644
index fa3186c73350..000000000000
--- a/include/asm-sh/cpu-sh2a/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/cacheflush.h>
diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h
deleted file mode 100644
index 0d5ad85c1de8..000000000000
--- a/include/asm-sh/cpu-sh2a/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/freq.h b/include/asm-sh/cpu-sh2a/freq.h
deleted file mode 100644
index 830fd43b6cdc..000000000000
--- a/include/asm-sh/cpu-sh2a/freq.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2a/freq.h
- *
- * Copyright (C) 2006  Yoshinori Sato
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2A_FREQ_H
-#define __ASM_CPU_SH2A_FREQ_H
-
-#define FREQCR	0xfffe0010
-
-#endif /* __ASM_CPU_SH2A_FREQ_H */
-
diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h
deleted file mode 100644
index cd2387f7db9e..000000000000
--- a/include/asm-sh/cpu-sh2a/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/mmu_context.h>
diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/include/asm-sh/cpu-sh2a/rtc.h
deleted file mode 100644
index afb511e2bed7..000000000000
--- a/include/asm-sh/cpu-sh2a/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH2A_RTC_H
-#define __ASM_SH_CPU_SH2A_RTC_H
-
-#define rtc_reg_size		sizeof(u16)
-#define RTC_BIT_INVERTED	0
-#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH2A_RTC_H */
diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h
deleted file mode 100644
index fee504adf11e..000000000000
--- a/include/asm-sh/cpu-sh2a/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/timer.h>
diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h
deleted file mode 100644
index cf28062b96a2..000000000000
--- a/include/asm-sh/cpu-sh2a/ubc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/ubc.h>
diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h
deleted file mode 100644
index c1b3e2488478..000000000000
--- a/include/asm-sh/cpu-sh2a/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/adc.h b/include/asm-sh/cpu-sh3/adc.h
deleted file mode 100644
index b289e3ca19a6..000000000000
--- a/include/asm-sh/cpu-sh3/adc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASM_CPU_SH3_ADC_H
-#define __ASM_CPU_SH3_ADC_H
-
-/*
- * Copyright (C) 2004  Andriy Skulysh
- */
-
-
-#define ADDRAH	0xa4000080
-#define ADDRAL	0xa4000082
-#define ADDRBH	0xa4000084
-#define ADDRBL	0xa4000086
-#define ADDRCH	0xa4000088
-#define ADDRCL	0xa400008a
-#define ADDRDH	0xa400008c
-#define ADDRDL	0xa400008e
-#define ADCSR	0xa4000090
-
-#define ADCSR_ADF	0x80
-#define ADCSR_ADIE	0x40
-#define ADCSR_ADST	0x20
-#define ADCSR_MULTI	0x10
-#define ADCSR_CKS	0x08
-#define ADCSR_CH_MASK	0x07
-
-#define ADCR	0xa4000092
-
-#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h
deleted file mode 100644
index 0f94726c7d62..000000000000
--- a/include/asm-sh/cpu-sh3/addrspace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-3 CPUs.
- */
-#ifndef __ASM_CPU_SH3_ADDRSPACE_H
-#define __ASM_CPU_SH3_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h
deleted file mode 100644
index bee2d81c56bf..000000000000
--- a/include/asm-sh/cpu-sh3/cache.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHE_H
-#define __ASM_CPU_SH3_CACHE_H
-
-#define L1_CACHE_SHIFT	4
-
-#define SH_CACHE_VALID		1
-#define SH_CACHE_UPDATED	2
-#define SH_CACHE_COMBINED	4
-#define SH_CACHE_ASSOC		8
-
-#define CCR		0xffffffec	/* Address of Cache Control Register */
-
-#define CCR_CACHE_CE	0x01	/* Cache Enable */
-#define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */
-#define CCR_CACHE_CB	0x04	/* Write-Back (for P1) (else writethrough) */
-#define CCR_CACHE_CF	0x08	/* Cache Flush */
-#define CCR_CACHE_ORA	0x20	/* RAM mode */
-
-#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
-#define CACHE_PHYSADDR_MASK	0x1ffffc00
-
-#define CCR_CACHE_ENABLE	CCR_CACHE_CE
-#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define CCR3_REG	0xa40000b4
-#define CCR_CACHE_16KB  0x00010000
-#define CCR_CACHE_32KB	0x00020000
-#endif
-
-#endif /* __ASM_CPU_SH3_CACHE_H */
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h
deleted file mode 100644
index f70d8ef76a15..000000000000
--- a/include/asm-sh/cpu-sh3/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-3, so
- *  we don't need them.
- */
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped	PG_arch_1
-
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-                              unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#else
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#endif
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/dac.h b/include/asm-sh/cpu-sh3/dac.h
deleted file mode 100644
index 05fda8316ebc..000000000000
--- a/include/asm-sh/cpu-sh3/dac.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef __ASM_CPU_SH3_DAC_H
-#define __ASM_CPU_SH3_DAC_H
-
-/*
- * Copyright (C) 2003  Andriy Skulysh
- */
-
-
-#define DADR0	0xa40000a0
-#define DADR1	0xa40000a2
-#define DACR	0xa40000a4
-#define DACR_DAOE1	0x80
-#define DACR_DAOE0	0x40
-#define DACR_DAE	0x20
-
-
-static __inline__ void sh_dac_enable(int channel)
-{
-	unsigned char v;
-	v = ctrl_inb(DACR);
-	if(channel) v |= DACR_DAOE1;
-	else v |= DACR_DAOE0;
-	ctrl_outb(v,DACR);
-}
-
-static __inline__ void sh_dac_disable(int channel)
-{
-	unsigned char v;
-	v = ctrl_inb(DACR);
-	if(channel) v &= ~DACR_DAOE1;
-	else v &= ~DACR_DAOE0;
-	ctrl_outb(v,DACR);
-}
-
-static __inline__ void sh_dac_output(u8 value, int channel)
-{
-	if(channel) ctrl_outb(value,DADR1);
-	else ctrl_outb(value,DADR0);
-}
-
-#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h
deleted file mode 100644
index 6813c3220a1d..000000000000
--- a/include/asm-sh/cpu-sh3/dma.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef __ASM_CPU_SH3_DMA_H
-#define __ASM_CPU_SH3_DMA_H
-
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define SH_DMAC_BASE	0xa4010020
-#else
-#define SH_DMAC_BASE	0xa4000020
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define DMTE0_IRQ	48
-#define DMTE1_IRQ	49
-#define DMTE2_IRQ	50
-#define DMTE3_IRQ	51
-#define DMTE4_IRQ	76
-#define DMTE5_IRQ	77
-#endif
-
-/* Definitions for the SuperH DMAC */
-#define TM_BURST	0x00000020
-#define TS_8		0x00000000
-#define TS_16		0x00000008
-#define TS_32		0x00000010
-#define TS_128		0x00000018
-
-#define CHCR_TS_MASK	0x18
-#define CHCR_TS_SHIFT	3
-
-#define DMAOR_INIT	DMAOR_DME
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- */
-enum {
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_128BIT,
-};
-
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_128BIT]	= 4,
-};
-
-#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h
deleted file mode 100644
index 53c62302b2e3..000000000000
--- a/include/asm-sh/cpu-sh3/freq.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_FREQ_H
-#define __ASM_CPU_SH3_FREQ_H
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7712
-#define FRQCR			0xA415FF80
-#else
-#define FRQCR			0xffffff80
-#endif
-
-#define MIN_DIVISOR_NR		0
-#define MAX_DIVISOR_NR		4
-
-#define FRQCR_CKOEN	0x0100
-#define FRQCR_PLLEN	0x0080
-#define FRQCR_PSTBY	0x0040
-
-#endif /* __ASM_CPU_SH3_FREQ_H */
-
diff --git a/include/asm-sh/cpu-sh3/gpio.h b/include/asm-sh/cpu-sh3/gpio.h
deleted file mode 100644
index 4e53eb314b8f..000000000000
--- a/include/asm-sh/cpu-sh3/gpio.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  include/asm-sh/cpu-sh3/gpio.h
- *
- *  Copyright (C) 2007  Markus Brunner, Mark Jonas
- *
- *  Addresses for the Pin Function Controller
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef _CPU_SH3_GPIO_H
-#define _CPU_SH3_GPIO_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-
-/* Control registers */
-#define PORT_PACR	0xA4050100UL
-#define PORT_PBCR	0xA4050102UL
-#define PORT_PCCR	0xA4050104UL
-#define PORT_PDCR	0xA4050106UL
-#define PORT_PECR	0xA4050108UL
-#define PORT_PFCR	0xA405010AUL
-#define PORT_PGCR	0xA405010CUL
-#define PORT_PHCR	0xA405010EUL
-#define PORT_PJCR	0xA4050110UL
-#define PORT_PKCR	0xA4050112UL
-#define PORT_PLCR	0xA4050114UL
-#define PORT_PMCR	0xA4050116UL
-#define PORT_PPCR	0xA4050118UL
-#define PORT_PRCR	0xA405011AUL
-#define PORT_PSCR	0xA405011CUL
-#define PORT_PTCR	0xA405011EUL
-#define PORT_PUCR	0xA4050120UL
-#define PORT_PVCR	0xA4050122UL
-
-/* Data registers */
-#define PORT_PADR	0xA4050140UL
-/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
-#define PORT_PBDR	0xA4050142UL
-#define PORT_PCDR	0xA4050144UL
-#define PORT_PDDR	0xA4050146UL
-#define PORT_PEDR	0xA4050148UL
-#define PORT_PFDR	0xA405014AUL
-#define PORT_PGDR	0xA405014CUL
-#define PORT_PHDR	0xA405014EUL
-#define PORT_PJDR	0xA4050150UL
-#define PORT_PKDR	0xA4050152UL
-#define PORT_PLDR	0xA4050154UL
-#define PORT_PMDR	0xA4050156UL
-#define PORT_PPDR	0xA4050158UL
-#define PORT_PRDR	0xA405015AUL
-#define PORT_PSDR	0xA405015CUL
-#define PORT_PTDR	0xA405015EUL
-#define PORT_PUDR	0xA4050160UL
-#define PORT_PVDR	0xA4050162UL
-
-/* Pin Select Registers */
-#define PORT_PSELA	0xA4050124UL
-#define PORT_PSELB	0xA4050126UL
-#define PORT_PSELC	0xA4050128UL
-#define PORT_PSELD	0xA405012AUL
-
-#endif
-
-#endif
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h
deleted file mode 100644
index ab09da73ce77..000000000000
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
-#define __ASM_CPU_SH3_MMU_CONTEXT_H
-
-#define MMU_PTEH	0xFFFFFFF0	/* Page table entry register HIGH */
-#define MMU_PTEL	0xFFFFFFF4	/* Page table entry register LOW */
-#define MMU_TTB		0xFFFFFFF8	/* Translation table base register */
-#define MMU_TEA		0xFFFFFFFC	/* TLB Exception Address */
-
-#define MMUCR		0xFFFFFFE0	/* MMU Control Register */
-
-#define MMU_TLB_ADDRESS_ARRAY	0xF2000000
-#define MMU_PAGE_ASSOC_BIT	0x80
-
-#define MMU_NTLB_ENTRIES	128	/* for 7708 */
-#define MMU_NTLB_WAYS		4
-#define MMU_CONTROL_INIT	0x007	/* SV=0, TF=1, IX=1, AT=1 */
-
-#define TRA	0xffffffd0
-#define EXPEVT	0xffffffd4
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7712) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
-#else
-#define INTEVT	0xffffffd8
-#endif
-
-#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
-
diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h
deleted file mode 100644
index 319404aaee37..000000000000
--- a/include/asm-sh/cpu-sh3/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH3_RTC_H
-#define __ASM_SH_CPU_SH3_RTC_H
-
-#define rtc_reg_size		sizeof(u16)
-#define RTC_BIT_INVERTED	0	/* No bug on SH7708, SH7709A */
-#define RTC_DEF_CAPABILITIES	0UL
-
-#endif /* __ASM_SH_CPU_SH3_RTC_H */
diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h
deleted file mode 100644
index 17310dc03dcd..000000000000
--- a/include/asm-sh/cpu-sh3/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
-#define __ASM_CPU_SH3_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-	/* CPU registers */
-	unsigned long sc_regs[16];
-	unsigned long sc_pc;
-	unsigned long sc_pr;
-	unsigned long sc_sr;
-	unsigned long sc_gbr;
-	unsigned long sc_mach;
-	unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h
deleted file mode 100644
index 793acf12aa08..000000000000
--- a/include/asm-sh/cpu-sh3/timer.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/timer.h
- *
- * Copyright (C) 2004 Lineo Solutions, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_TIMER_H
-#define __ASM_CPU_SH3_TIMER_H
-
-/*
- * ---------------------------------------------------------------------------
- * TMU Common definitions for SH3 processors
- *	SH7706
- *	SH7709S
- *	SH7727
- *	SH7729R
- *	SH7710
- *	SH7720
- *	SH7710
- * ---------------------------------------------------------------------------
- */
-
-#if  !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU_TOCR	0xfffffe90	/* Byte access */
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU_012_TSTR	0xa412fe92	/* Byte access */
-
-#define TMU0_TCOR	0xa412fe94	/* Long access */
-#define TMU0_TCNT	0xa412fe98	/* Long access */
-#define TMU0_TCR	0xa412fe9c	/* Word access */
-
-#define TMU1_TCOR	0xa412fea0	/* Long access */
-#define TMU1_TCNT	0xa412fea4	/* Long access */
-#define TMU1_TCR	0xa412fea8	/* Word access */
-
-#define TMU2_TCOR	0xa412feac	/* Long access */
-#define TMU2_TCNT	0xa412feb0	/* Long access */
-#define TMU2_TCR	0xa412feb4	/* Word access */
-
-#else
-#define TMU_012_TSTR	0xfffffe92	/* Byte access */
-
-#define TMU0_TCOR	0xfffffe94	/* Long access */
-#define TMU0_TCNT	0xfffffe98	/* Long access */
-#define TMU0_TCR	0xfffffe9c	/* Word access */
-
-#define TMU1_TCOR	0xfffffea0	/* Long access */
-#define TMU1_TCNT	0xfffffea4	/* Long access */
-#define TMU1_TCR	0xfffffea8	/* Word access */
-
-#define TMU2_TCOR	0xfffffeac	/* Long access */
-#define TMU2_TCNT	0xfffffeb0	/* Long access */
-#define TMU2_TCR	0xfffffeb4	/* Word access */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU2_TCPR2	0xfffffeb8	/* Long access */
-#endif
-#endif
-
-#endif /* __ASM_CPU_SH3_TIMER_H */
-
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h
deleted file mode 100644
index 4e6381d5ff7a..000000000000
--- a/include/asm-sh/cpu-sh3/ubc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_UBC_H
-#define __ASM_CPU_SH3_UBC_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define UBC_BARA		0xa4ffffb0
-#define UBC_BAMRA		0xa4ffffb4
-#define UBC_BBRA		0xa4ffffb8
-#define UBC_BASRA		0xffffffe4
-#define UBC_BARB		0xa4ffffa0
-#define UBC_BAMRB		0xa4ffffa4
-#define UBC_BBRB		0xa4ffffa8
-#define UBC_BASRB		0xffffffe8
-#define UBC_BDRB		0xa4ffff90
-#define UBC_BDMRB		0xa4ffff94
-#define UBC_BRCR		0xa4ffff98
-#else
-#define UBC_BARA                0xffffffb0
-#define UBC_BAMRA               0xffffffb4
-#define UBC_BBRA                0xffffffb8
-#define UBC_BASRA               0xffffffe4
-#define UBC_BARB                0xffffffa0
-#define UBC_BAMRB               0xffffffa4
-#define UBC_BBRB                0xffffffa8
-#define UBC_BASRB               0xffffffe8
-#define UBC_BDRB                0xffffff90
-#define UBC_BDMRB               0xffffff94
-#define UBC_BRCR                0xffffff98
-#endif
-
-#endif /* __ASM_CPU_SH3_UBC_H */
diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/include/asm-sh/cpu-sh3/watchdog.h
deleted file mode 100644
index 4ee0347298d8..000000000000
--- a/include/asm-sh/cpu-sh3/watchdog.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_WATCHDOG_H
-#define __ASM_CPU_SH3_WATCHDOG_H
-
-/* Register definitions */
-#define WTCNT		0xffffff84
-#define WTCSR		0xffffff86
-
-/* Bit definitions */
-#define WTCSR_TME	0x80
-#define WTCSR_WT	0x40
-#define WTCSR_RSTS	0x20
-#define WTCSR_WOVF	0x10
-#define WTCSR_IOVF	0x08
-
-#endif /* __ASM_CPU_SH3_WATCHDOG_H */
-
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h
deleted file mode 100644
index a3fa733c1c7d..000000000000
--- a/include/asm-sh/cpu-sh4/addrspace.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-4 CPUs.
- */
-#ifndef __ASM_CPU_SH4_ADDRSPACE_H
-#define __ASM_CPU_SH4_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-/* Detailed P4SEG  */
-#define P4SEG_STORE_QUE	(P4SEG)
-#define P4SEG_IC_ADDR	0xf0000000
-#define P4SEG_IC_DATA	0xf1000000
-#define P4SEG_ITLB_ADDR	0xf2000000
-#define P4SEG_ITLB_DATA	0xf3000000
-#define P4SEG_OC_ADDR	0xf4000000
-#define P4SEG_OC_DATA	0xf5000000
-#define P4SEG_TLB_ADDR	0xf6000000
-#define P4SEG_TLB_DATA	0xf7000000
-#define P4SEG_REG_BASE	0xff000000
-
-#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
-#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
-
-#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
-
diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h
deleted file mode 100644
index 1c61ebf5c8e3..000000000000
--- a/include/asm-sh/cpu-sh4/cache.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/cache.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_CACHE_H
-#define __ASM_CPU_SH4_CACHE_H
-
-#define L1_CACHE_SHIFT	5
-
-#define SH_CACHE_VALID		1
-#define SH_CACHE_UPDATED	2
-#define SH_CACHE_COMBINED	4
-#define SH_CACHE_ASSOC		8
-
-#define CCR		0xff00001c	/* Address of Cache Control Register */
-#define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
-#define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
-#define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */
-#define CCR_CACHE_OCI	0x0008	/* OC Invalidate */
-#define CCR_CACHE_ORA	0x0020	/* OC RAM Mode */
-#define CCR_CACHE_OIX	0x0080	/* OC Index Enable */
-#define CCR_CACHE_ICE	0x0100	/* Instruction Cache Enable */
-#define CCR_CACHE_ICI	0x0800	/* IC Invalidate */
-#define CCR_CACHE_IIX	0x8000	/* IC Index Enable */
-#ifndef CONFIG_CPU_SH4A
-#define CCR_CACHE_EMODE	0x80000000	/* EMODE Enable */
-#endif
-
-/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
-#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE|CCR_CACHE_ICE)
-#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI|CCR_CACHE_ICI)
-
-#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
-#define CACHE_OC_ADDRESS_ARRAY	0xf4000000
-
-#endif /* __ASM_CPU_SH4_CACHE_H */
-
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h
deleted file mode 100644
index 5fd5c89ef86a..000000000000
--- a/include/asm-sh/cpu-sh4/cacheflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
-#define __ASM_CPU_SH4_CACHEFLUSH_H
-
-/*
- *  Caches are broken on SH-4 (unless we use write-through
- *  caching; in which case they're only semi-broken),
- *  so we need them.
- */
-void flush_cache_all(void);
-void flush_dcache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
-		      unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_cache_sigtramp(unsigned long addr);
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len);
-
-#define flush_icache_page(vma,pg)		do { } while (0)
-
-/* Initialization of P3 area for copy_user_page */
-void p3_cache_init(void);
-
-#define PG_mapped	PG_arch_1
-
-#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/include/asm-sh/cpu-sh4/dma-sh7780.h
deleted file mode 100644
index 71b426a6e482..000000000000
--- a/include/asm-sh/cpu-sh4/dma-sh7780.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
-#define __ASM_SH_CPU_SH4_DMA_SH7780_H
-
-#define REQ_HE	0x000000C0
-#define REQ_H	0x00000080
-#define REQ_LE	0x00000040
-#define TM_BURST 0x0000020
-#define TS_8	0x00000000
-#define TS_16	0x00000008
-#define TS_32	0x00000010
-#define TS_16BLK	0x00000018
-#define TS_32BLK	0x00100000
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_128BIT,
-	XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_128BIT]	= 4,
-	[XMIT_SZ_256BIT]	= 5,
-};
-
-#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
deleted file mode 100644
index aaf71b018c28..000000000000
--- a/include/asm-sh/cpu-sh4/dma.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __ASM_CPU_SH4_DMA_H
-#define __ASM_CPU_SH4_DMA_H
-
-#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
-
-/* SH7751/7760/7780 DMA IRQ sources */
-#define DMTE0_IRQ	34
-#define DMTE1_IRQ	35
-#define DMTE2_IRQ	36
-#define DMTE3_IRQ	37
-#define DMTE4_IRQ	44
-#define DMTE5_IRQ	45
-#define DMTE6_IRQ	46
-#define DMTE7_IRQ	47
-#define DMAE_IRQ	38
-
-#ifdef CONFIG_CPU_SH4A
-#define SH_DMAC_BASE	0xfc808020
-
-#define CHCR_TS_MASK	0x18
-#define CHCR_TS_SHIFT	3
-
-#include <asm/cpu/dma-sh7780.h>
-#else
-#define SH_DMAC_BASE	0xffa00000
-
-/* Definitions for the SuperH DMAC */
-#define TM_BURST	0x0000080
-#define TS_8		0x00000010
-#define TS_16		0x00000020
-#define TS_32		0x00000030
-#define TS_64		0x00000000
-
-#define CHCR_TS_MASK	0x70
-#define CHCR_TS_SHIFT	4
-
-#define DMAOR_COD	0x00000008
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
-	XMIT_SZ_64BIT,
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_64BIT]		= 3,
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_256BIT]	= 5,
-};
-#endif
-
-#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/fpu.h b/include/asm-sh/cpu-sh4/fpu.h
deleted file mode 100644
index febef7342528..000000000000
--- a/include/asm-sh/cpu-sh4/fpu.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h
- *
- * Copyright (C) 2006 STMicroelectronics Limited
- * Author: Carl Shaw <carl.shaw@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License Version 2.  See linux/COPYING for more information.
- *
- * Definitions for SH4 FPU operations
- */
-
-#ifndef __CPU_SH4_FPU_H
-#define __CPU_SH4_FPU_H
-
-#define FPSCR_ENABLE_MASK	0x00000f80UL
-
-#define FPSCR_FMOV_DOUBLE	(1<<1)
-
-#define FPSCR_CAUSE_INEXACT	(1<<12)
-#define FPSCR_CAUSE_UNDERFLOW	(1<<13)
-#define FPSCR_CAUSE_OVERFLOW	(1<<14)
-#define FPSCR_CAUSE_DIVZERO	(1<<15)
-#define FPSCR_CAUSE_INVALID	(1<<16)
-#define FPSCR_CAUSE_ERROR 	(1<<17)
-
-#define FPSCR_DBL_PRECISION	(1<<19)
-#define FPSCR_ROUNDING_MODE(x)	((x >> 20) & 3)
-#define FPSCR_RM_NEAREST	(0)
-#define FPSCR_RM_ZERO		(1)
-
-#endif
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
deleted file mode 100644
index da46e67ae26d..000000000000
--- a/include/asm-sh/cpu-sh4/freq.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_FREQ_H
-#define __ASM_CPU_SH4_FREQ_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7366)
-#define FRQCR		        0xa4150000
-#define VCLKCR			0xa4150004
-#define SCLKACR			0xa4150008
-#define SCLKBCR			0xa415000c
-#define IrDACLKCR		0xa4150010
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define	FRQCR			0xffc80000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define FRQCR0			0xffc80000
-#define FRQCR1			0xffc80004
-#define FRQMR1			0xffc80014
-#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define FRQCR			0xffc00014
-#else
-#define FRQCR			0xffc00000
-#define FRQCR_PSTBY		0x0200
-#define FRQCR_PLLEN		0x0400
-#define FRQCR_CKOEN		0x0800
-#endif
-#define MIN_DIVISOR_NR		0
-#define MAX_DIVISOR_NR		3
-
-#endif /* __ASM_CPU_SH4_FREQ_H */
-
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h
deleted file mode 100644
index 9ea8eb27b18e..000000000000
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/mmu_context.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
-#define __ASM_CPU_SH4_MMU_CONTEXT_H
-
-#define MMU_PTEH	0xFF000000	/* Page table entry register HIGH */
-#define MMU_PTEL	0xFF000004	/* Page table entry register LOW */
-#define MMU_TTB		0xFF000008	/* Translation table base register */
-#define MMU_TEA		0xFF00000C	/* TLB Exception Address */
-#define MMU_PTEA	0xFF000034	/* Page table entry assistance register */
-
-#define MMUCR		0xFF000010	/* MMU Control Register */
-
-#define MMU_ITLB_ADDRESS_ARRAY	0xF2000000
-#define MMU_UTLB_ADDRESS_ARRAY	0xF6000000
-#define MMU_PAGE_ASSOC_BIT	0x80
-
-#define MMUCR_TI		(1<<2)
-
-#ifdef CONFIG_X2TLB
-#define MMUCR_ME		(1 << 7)
-#else
-#define MMUCR_ME		(0)
-#endif
-
-#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
-#define MMUCR_SE		(1 << 4)
-#else
-#define MMUCR_SE		(0)
-#endif
-
-#ifdef CONFIG_SH_STORE_QUEUES
-#define MMUCR_SQMD		(1 << 9)
-#else
-#define MMUCR_SQMD		(0)
-#endif
-
-#define MMU_NTLB_ENTRIES	64
-#define MMU_CONTROL_INIT	(0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE)
-
-#define MMU_ITLB_DATA_ARRAY	0xF3000000
-#define MMU_UTLB_DATA_ARRAY	0xF7000000
-
-#define MMU_UTLB_ENTRIES	   64
-#define MMU_U_ENTRY_SHIFT	    8
-#define MMU_UTLB_VALID		0x100
-#define MMU_ITLB_ENTRIES	    4
-#define MMU_I_ENTRY_SHIFT	    8
-#define MMU_ITLB_VALID		0x100
-
-#define TRA	0xff000020
-#define EXPEVT	0xff000024
-#define INTEVT	0xff000028
-
-#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
-
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/include/asm-sh/cpu-sh4/rtc.h
deleted file mode 100644
index 25b1e6adfe8c..000000000000
--- a/include/asm-sh/cpu-sh4/rtc.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_SH_CPU_SH4_RTC_H
-#define __ASM_SH_CPU_SH4_RTC_H
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7723
-#define rtc_reg_size		sizeof(u16)
-#else
-#define rtc_reg_size		sizeof(u32)
-#endif
-
-#define RTC_BIT_INVERTED	0x40	/* bug on SH7750, SH7750S */
-#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH4_RTC_H */
diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/include/asm-sh/cpu-sh4/sigcontext.h
deleted file mode 100644
index ab392f120e06..000000000000
--- a/include/asm-sh/cpu-sh4/sigcontext.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
-#define __ASM_CPU_SH4_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-	/* CPU registers */
-	unsigned long sc_regs[16];
-	unsigned long sc_pc;
-	unsigned long sc_pr;
-	unsigned long sc_sr;
-	unsigned long sc_gbr;
-	unsigned long sc_mach;
-	unsigned long sc_macl;
-
-	/* FPU registers */
-	unsigned long sc_fpregs[16];
-	unsigned long sc_xfpregs[16];
-	unsigned int sc_fpscr;
-	unsigned int sc_fpul;
-	unsigned int sc_ownedfp;
-};
-
-#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh4/sq.h b/include/asm-sh/cpu-sh4/sq.h
deleted file mode 100644
index 586d6491816a..000000000000
--- a/include/asm-sh/cpu-sh4/sq.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/sq.h
- *
- * Copyright (C) 2001, 2002, 2003  Paul Mundt
- * Copyright (C) 2001, 2002  M. R. Brown
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_SQ_H
-#define __ASM_CPU_SH4_SQ_H
-
-#include <asm/addrspace.h>
-
-/*
- * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
- * mapped to any physical address space. Since data is written (and aligned)
- * to 32-byte boundaries, we need to be sure that all allocations are aligned.
- */
-#define SQ_SIZE                 32
-#define SQ_ALIGN_MASK           (~(SQ_SIZE - 1))
-#define SQ_ALIGN(addr)          (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
-
-#define SQ_QACR0		(P4SEG_REG_BASE  + 0x38)
-#define SQ_QACR1		(P4SEG_REG_BASE  + 0x3c)
-#define SQ_ADDRMAX              (P4SEG_STORE_QUE + 0x04000000)
-
-/* arch/sh/kernel/cpu/sh4/sq.c */
-unsigned long sq_remap(unsigned long phys, unsigned int size,
-		       const char *name, unsigned long flags);
-void sq_unmap(unsigned long vaddr);
-void sq_flush_range(unsigned long start, unsigned int len);
-
-#endif /* __ASM_CPU_SH4_SQ_H */
diff --git a/include/asm-sh/cpu-sh4/timer.h b/include/asm-sh/cpu-sh4/timer.h
deleted file mode 100644
index d1e796b96888..000000000000
--- a/include/asm-sh/cpu-sh4/timer.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/timer.h
- *
- * Copyright (C) 2004 Lineo Solutions, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_TIMER_H
-#define __ASM_CPU_SH4_TIMER_H
-
-/*
- * ---------------------------------------------------------------------------
- * TMU Common definitions for SH4 processors
- *	SH7750S/SH7750R
- *	SH7751/SH7751R
- *	SH7760
- *	SH-X3
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_CPU_SUBTYPE_SHX3
-#define TMU_012_BASE	0xffc10000
-#define TMU_345_BASE	0xffc20000
-#else
-#define TMU_012_BASE	0xffd80000
-#define TMU_345_BASE	0xfe100000
-#endif
-
-#define TMU_TOCR	TMU_012_BASE	/* Not supported on all CPUs */
-
-#define TMU_012_TSTR	(TMU_012_BASE + 0x04)
-#define TMU_345_TSTR	(TMU_345_BASE + 0x04)
-
-#define TMU0_TCOR	(TMU_012_BASE + 0x08)
-#define TMU0_TCNT	(TMU_012_BASE + 0x0c)
-#define TMU0_TCR	(TMU_012_BASE + 0x10)
-
-#define TMU1_TCOR       (TMU_012_BASE + 0x14)
-#define TMU1_TCNT       (TMU_012_BASE + 0x18)
-#define TMU1_TCR        (TMU_012_BASE + 0x1c)
-
-#define TMU2_TCOR       (TMU_012_BASE + 0x20)
-#define TMU2_TCNT       (TMU_012_BASE + 0x24)
-#define TMU2_TCR	(TMU_012_BASE + 0x28)
-#define TMU2_TCPR	(TMU_012_BASE + 0x2c)
-
-#define TMU3_TCOR	(TMU_345_BASE + 0x08)
-#define TMU3_TCNT	(TMU_345_BASE + 0x0c)
-#define TMU3_TCR	(TMU_345_BASE + 0x10)
-
-#define TMU4_TCOR	(TMU_345_BASE + 0x14)
-#define TMU4_TCNT	(TMU_345_BASE + 0x18)
-#define TMU4_TCR	(TMU_345_BASE + 0x1c)
-
-#define TMU5_TCOR	(TMU_345_BASE + 0x20)
-#define TMU5_TCNT	(TMU_345_BASE + 0x24)
-#define TMU5_TCR	(TMU_345_BASE + 0x28)
-
-#endif /* __ASM_CPU_SH4_TIMER_H */
diff --git a/include/asm-sh/cpu-sh4/ubc.h b/include/asm-sh/cpu-sh4/ubc.h
deleted file mode 100644
index c86e17050935..000000000000
--- a/include/asm-sh/cpu-sh4/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_UBC_H
-#define __ASM_CPU_SH4_UBC_H
-
-#if defined(CONFIG_CPU_SH4A)
-#define UBC_CBR0		0xff200000
-#define UBC_CRR0		0xff200004
-#define UBC_CAR0		0xff200008
-#define UBC_CAMR0		0xff20000c
-#define UBC_CBR1		0xff200020
-#define UBC_CRR1		0xff200024
-#define UBC_CAR1		0xff200028
-#define UBC_CAMR1		0xff20002c
-#define UBC_CDR1		0xff200030
-#define UBC_CDMR1		0xff200034
-#define UBC_CETR1		0xff200038
-#define UBC_CCMFR		0xff200600
-#define UBC_CBCR		0xff200620
-
-/* CBR	*/
-#define UBC_CBR_AIE		(0x01<<30)
-#define UBC_CBR_ID_INST		(0x01<<4)
-#define UBC_CBR_RW_READ		(0x01<<1)
-#define UBC_CBR_CE		(0x01)
-
-#define	UBC_CBR_AIV_MASK	(0x00FF0000)
-#define	UBC_CBR_AIV_SHIFT	(16)
-#define UBC_CBR_AIV_SET(asid)	(((asid)<<UBC_CBR_AIV_SHIFT) & UBC_CBR_AIV_MASK)
-
-#define UBC_CBR_INIT		0x20000000
-
-/* CRR	*/
-#define UBC_CRR_RES		(0x01<<13)
-#define UBC_CRR_PCB		(0x01<<1)
-#define UBC_CRR_BIE		(0x01)
-
-#define UBC_CRR_INIT		0x00002000
-
-#else	/* CONFIG_CPU_SH4 */
-#define UBC_BARA		0xff200000
-#define UBC_BAMRA		0xff200004
-#define UBC_BBRA		0xff200008
-#define UBC_BASRA		0xff000014
-#define UBC_BARB		0xff20000c
-#define UBC_BAMRB		0xff200010
-#define UBC_BBRB		0xff200014
-#define UBC_BASRB		0xff000018
-#define UBC_BDRB		0xff200018
-#define UBC_BDMRB		0xff20001c
-#define UBC_BRCR		0xff200020
-#endif	/* CONFIG_CPU_SH4 */
-
-#endif /* __ASM_CPU_SH4_UBC_H */
-
diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/include/asm-sh/cpu-sh4/watchdog.h
deleted file mode 100644
index 259f6a0ce23d..000000000000
--- a/include/asm-sh/cpu-sh4/watchdog.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_WATCHDOG_H
-#define __ASM_CPU_SH4_WATCHDOG_H
-
-/* Register definitions */
-#define WTCNT		0xffc00008
-#define WTCSR		0xffc0000c
-
-/* Bit definitions */
-#define WTCSR_TME	0x80
-#define WTCSR_WT	0x40
-#define WTCSR_RSTS	0x20
-#define WTCSR_WOVF	0x10
-#define WTCSR_IOVF	0x08
-
-#endif /* __ASM_CPU_SH4_WATCHDOG_H */
-
diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/include/asm-sh/cpu-sh5/addrspace.h
deleted file mode 100644
index dc36b9a03af6..000000000000
--- a/include/asm-sh/cpu-sh5/addrspace.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
-#define __ASM_SH_CPU_SH5_ADDRSPACE_H
-
-#define	PHYS_PERIPHERAL_BLOCK	0x09000000
-#define PHYS_DMAC_BLOCK		0x0e000000
-#define PHYS_PCI_BLOCK		0x60000000
-#define PHYS_EMI_BLOCK		0xff000000
-
-/* No segmentation.. */
-
-#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh5/cache.h b/include/asm-sh/cpu-sh5/cache.h
deleted file mode 100644
index ed050ab526f2..000000000000
--- a/include/asm-sh/cpu-sh5/cache.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_CACHE_H
-#define __ASM_SH_CPU_SH5_CACHE_H
-
-/*
- * include/asm-sh/cpu-sh5/cache.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#define L1_CACHE_SHIFT		5
-
-/* Valid and Dirty bits */
-#define SH_CACHE_VALID		(1LL<<0)
-#define SH_CACHE_UPDATED	(1LL<<57)
-
-/* Unimplemented compat bits.. */
-#define SH_CACHE_COMBINED	0
-#define SH_CACHE_ASSOC		0
-
-/* Cache flags */
-#define SH_CACHE_MODE_WT	(1LL<<0)
-#define SH_CACHE_MODE_WB	(1LL<<1)
-
-/*
- * Control Registers.
- */
-#define ICCR_BASE	0x01600000	/* Instruction Cache Control Register */
-#define ICCR_REG0	0		/* Register 0 offset */
-#define ICCR_REG1	1		/* Register 1 offset */
-#define ICCR0		ICCR_BASE+ICCR_REG0
-#define ICCR1		ICCR_BASE+ICCR_REG1
-
-#define ICCR0_OFF	0x0		/* Set ICACHE off */
-#define ICCR0_ON	0x1		/* Set ICACHE on */
-#define ICCR0_ICI	0x2		/* Invalidate all in IC */
-
-#define ICCR1_NOLOCK	0x0		/* Set No Locking */
-
-#define OCCR_BASE	0x01E00000	/* Operand Cache Control Register */
-#define OCCR_REG0	0		/* Register 0 offset */
-#define OCCR_REG1	1		/* Register 1 offset */
-#define OCCR0		OCCR_BASE+OCCR_REG0
-#define OCCR1		OCCR_BASE+OCCR_REG1
-
-#define OCCR0_OFF	0x0		/* Set OCACHE off */
-#define OCCR0_ON	0x1		/* Set OCACHE on */
-#define OCCR0_OCI	0x2		/* Invalidate all in OC */
-#define OCCR0_WT	0x4		/* Set OCACHE in WT Mode */
-#define OCCR0_WB	0x0		/* Set OCACHE in WB Mode */
-
-#define OCCR1_NOLOCK	0x0		/* Set No Locking */
-
-/*
- * SH-5
- * A bit of description here, for neff=32.
- *
- *                               |<--- tag  (19 bits) --->|
- * +-----------------------------+-----------------+------+----------+------+
- * |                             |                 | ways |set index |offset|
- * +-----------------------------+-----------------+------+----------+------+
- *                                ^                 2 bits   8 bits   5 bits
- *                                +- Bit 31
- *
- * Cacheline size is based on offset: 5 bits = 32 bytes per line
- * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
- * have a broader space for registers. These are outlined by
- * CACHE_?C_*_STEP below.
- *
- */
-
-/* Instruction cache */
-#define CACHE_IC_ADDRESS_ARRAY 0x01000000
-
-/* Operand Cache */
-#define CACHE_OC_ADDRESS_ARRAY 0x01800000
-
-/* These declarations relate to cache 'synonyms' in the operand cache.  A
-   'synonym' occurs where effective address bits overlap between those used for
-   indexing the cache sets and those passed to the MMU for translation.  In the
-   case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
-
-#define CACHE_OC_N_SYNBITS  1               /* Number of synonym bits */
-#define CACHE_OC_SYN_SHIFT  12
-/* Mask to select synonym bit(s) */
-#define CACHE_OC_SYN_MASK   (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
-
-/*
- * Instruction cache can't be invalidated based on physical addresses.
- * No Instruction Cache defines required, then.
- */
-
-#endif /* __ASM_SH_CPU_SH5_CACHE_H */
diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/include/asm-sh/cpu-sh5/cacheflush.h
deleted file mode 100644
index 5a11f0b7e66a..000000000000
--- a/include/asm-sh/cpu-sh5/cacheflush.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_CACHEFLUSH_H
-#define __ASM_SH_CPU_SH5_CACHEFLUSH_H
-
-#ifndef __ASSEMBLY__
-
-struct vm_area_struct;
-struct page;
-struct mm_struct;
-
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_sigtramp(unsigned long vaddr);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-			      unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-extern void flush_dcache_page(struct page *pg);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
-				    struct page *page, unsigned long addr,
-				    int len);
-
-#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-#define flush_icache_page(vma, page)	do { } while (0)
-void p3_cache_init(void);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */
-
diff --git a/include/asm-sh/cpu-sh5/dma.h b/include/asm-sh/cpu-sh5/dma.h
deleted file mode 100644
index 7bf6bb3d35ed..000000000000
--- a/include/asm-sh/cpu-sh5/dma.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_DMA_H
-#define __ASM_SH_CPU_SH5_DMA_H
-
-/* Nothing yet */
-
-#endif /* __ASM_SH_CPU_SH5_DMA_H */
diff --git a/include/asm-sh/cpu-sh5/irq.h b/include/asm-sh/cpu-sh5/irq.h
deleted file mode 100644
index f0f0756e6e84..000000000000
--- a/include/asm-sh/cpu-sh5/irq.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_IRQ_H
-#define __ASM_SH_CPU_SH5_IRQ_H
-
-/*
- * include/asm-sh/cpu-sh5/irq.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-
-/*
- * Encoded IRQs are not considered worth to be supported.
- * Main reason is that there's no per-encoded-interrupt
- * enable/disable mechanism (as there was in SH3/4).
- * An all enabled/all disabled is worth only if there's
- * a cascaded IC to disable/enable/ack on. Until such
- * IC is available there's no such support.
- *
- * Presumably Encoded IRQs may use extra IRQs beyond 64,
- * below. Some logic must be added to cope with IRQ_IRL?
- * in an exclusive way.
- *
- * Priorities are set at Platform level, when IRQ_IRL0-3
- * are set to 0 Encoding is allowed. Otherwise it's not
- * allowed.
- */
-
-/* Independent IRQs */
-#define IRQ_IRL0	0
-#define IRQ_IRL1	1
-#define IRQ_IRL2	2
-#define IRQ_IRL3	3
-
-#define IRQ_INTA	4
-#define IRQ_INTB	5
-#define IRQ_INTC	6
-#define IRQ_INTD	7
-
-#define IRQ_SERR	12
-#define IRQ_ERR		13
-#define IRQ_PWR3	14
-#define IRQ_PWR2	15
-#define IRQ_PWR1	16
-#define IRQ_PWR0	17
-
-#define IRQ_DMTE0	18
-#define IRQ_DMTE1	19
-#define IRQ_DMTE2	20
-#define IRQ_DMTE3	21
-#define IRQ_DAERR	22
-
-#define IRQ_TUNI0	32
-#define IRQ_TUNI1	33
-#define IRQ_TUNI2	34
-#define IRQ_TICPI2	35
-
-#define IRQ_ATI		36
-#define IRQ_PRI		37
-#define IRQ_CUI		38
-
-#define IRQ_ERI		39
-#define IRQ_RXI		40
-#define IRQ_BRI		41
-#define IRQ_TXI		42
-
-#define IRQ_ITI		63
-
-#define NR_INTC_IRQS	64
-
-#ifdef CONFIG_SH_CAYMAN
-#define NR_EXT_IRQS     32
-#define START_EXT_IRQS  64
-
-/* PCI bus 2 uses encoded external interrupts on the Cayman board */
-#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
-#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
-#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
-#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
-
-#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
-#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
-
-#define IRQ_CFCARD	(START_EXT_IRQS + 7)
-#define IRQ_PCMCIA	(0)
-
-#else
-#define NR_EXT_IRQS	0
-#endif
-
-/* Default IRQs, fixed */
-#define TIMER_IRQ	IRQ_TUNI0
-#define RTC_IRQ		IRQ_CUI
-
-/* Default Priorities, Platform may choose differently */
-#define	NO_PRIORITY	0	/* Disabled */
-#define TIMER_PRIORITY	2
-#define RTC_PRIORITY	TIMER_PRIORITY
-#define SCIF_PRIORITY	3
-#define INTD_PRIORITY	3
-#define	IRL3_PRIORITY	4
-#define INTC_PRIORITY	6
-#define	IRL2_PRIORITY	7
-#define INTB_PRIORITY	9
-#define	IRL1_PRIORITY	10
-#define INTA_PRIORITY	12
-#define	IRL0_PRIORITY	13
-#define TOP_PRIORITY	15
-
-extern int intc_evt_to_irq[(0xE20/0x20)+1];
-int intc_irq_describe(char* p, int irq);
-extern int platform_int_priority[NR_INTC_IRQS];
-
-#endif /* __ASM_SH_CPU_SH5_IRQ_H */
diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/include/asm-sh/cpu-sh5/mmu_context.h
deleted file mode 100644
index 68a1d2cff457..000000000000
--- a/include/asm-sh/cpu-sh5/mmu_context.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H
-#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H
-
-/* Common defines */
-#define TLB_STEP	0x00000010
-#define TLB_PTEH	0x00000000
-#define TLB_PTEL	0x00000008
-
-/* PTEH defines */
-#define PTEH_ASID_SHIFT	2
-#define PTEH_VALID	0x0000000000000001
-#define PTEH_SHARED	0x0000000000000002
-#define PTEH_MATCH_ASID	0x00000000000003ff
-
-#ifndef __ASSEMBLY__
-/* This has to be a common function because the next location to fill
- * information is shared. */
-extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */
diff --git a/include/asm-sh/cpu-sh5/registers.h b/include/asm-sh/cpu-sh5/registers.h
deleted file mode 100644
index 6664ea6f1566..000000000000
--- a/include/asm-sh/cpu-sh5/registers.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_REGISTERS_H
-#define __ASM_SH_CPU_SH5_REGISTERS_H
-
-/*
- * include/asm-sh/cpu-sh5/registers.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004  Richard Curnow
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifdef __ASSEMBLY__
-/* =====================================================================
-**
-** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
-**	      Assigns symbolic names to control & target registers.
-*/
-
-/*
- * Define some useful aliases for control registers.
- */
-#define SR	cr0
-#define SSR	cr1
-#define PSSR	cr2
-			/* cr3 UNDEFINED */
-#define INTEVT	cr4
-#define EXPEVT	cr5
-#define PEXPEVT	cr6
-#define TRA	cr7
-#define SPC	cr8
-#define PSPC	cr9
-#define RESVEC	cr10
-#define VBR	cr11
-			/* cr12 UNDEFINED */
-#define TEA	cr13
-			/* cr14-cr15 UNDEFINED */
-#define DCR	cr16
-#define KCR0	cr17
-#define KCR1	cr18
-			/* cr19-cr31 UNDEFINED */
-			/* cr32-cr61 RESERVED */
-#define CTC	cr62
-#define USR	cr63
-
-/*
- * ABI dependent registers (general purpose set)
- */
-#define RET	r2
-#define ARG1	r2
-#define ARG2	r3
-#define ARG3	r4
-#define ARG4	r5
-#define ARG5	r6
-#define ARG6	r7
-#define SP	r15
-#define LINK	r18
-#define ZERO	r63
-
-/*
- * Status register defines: used only by assembly sources (and
- * 			    syntax independednt)
- */
-#define SR_RESET_VAL	0x0000000050008000
-#define SR_HARMLESS	0x00000000500080f0	/* Write ignores for most */
-#define SR_ENABLE_FPU	0xffffffffffff7fff	/* AND with this */
-
-#if defined (CONFIG_SH64_SR_WATCH)
-#define SR_ENABLE_MMU	0x0000000084000000	/* OR with this */
-#else
-#define SR_ENABLE_MMU	0x0000000080000000	/* OR with this */
-#endif
-
-#define SR_UNBLOCK_EXC	0xffffffffefffffff	/* AND with this */
-#define SR_BLOCK_EXC	0x0000000010000000	/* OR with this */
-
-#else	/* Not __ASSEMBLY__ syntax */
-
-/*
-** Stringify reg. name
-*/
-#define __str(x)  #x
-
-/* Stringify control register names for use in inline assembly */
-#define __SR __str(SR)
-#define __SSR __str(SSR)
-#define __PSSR __str(PSSR)
-#define __INTEVT __str(INTEVT)
-#define __EXPEVT __str(EXPEVT)
-#define __PEXPEVT __str(PEXPEVT)
-#define __TRA __str(TRA)
-#define __SPC __str(SPC)
-#define __PSPC __str(PSPC)
-#define __RESVEC __str(RESVEC)
-#define __VBR __str(VBR)
-#define __TEA __str(TEA)
-#define __DCR __str(DCR)
-#define __KCR0 __str(KCR0)
-#define __KCR1 __str(KCR1)
-#define __CTC __str(CTC)
-#define __USR __str(USR)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */
diff --git a/include/asm-sh/cpu-sh5/rtc.h b/include/asm-sh/cpu-sh5/rtc.h
deleted file mode 100644
index 12ea0ed144e1..000000000000
--- a/include/asm-sh/cpu-sh5/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_RTC_H
-#define __ASM_SH_CPU_SH5_RTC_H
-
-#define rtc_reg_size		sizeof(u32)
-#define RTC_BIT_INVERTED	0	/* The SH-5 RTC is surprisingly sane! */
-#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
-
-#endif /* __ASM_SH_CPU_SH5_RTC_H */
diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h
deleted file mode 100644
index 88da9b341a36..000000000000
--- a/include/asm-sh/cpu-sh5/timer.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_TIMER_H
-#define __ASM_SH_CPU_SH5_TIMER_H
-
-#endif /* __ASM_SH_CPU_SH5_TIMER_H */
diff --git a/include/asm-sh/cputime.h b/include/asm-sh/cputime.h
deleted file mode 100644
index 6ca395d1393e..000000000000
--- a/include/asm-sh/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SH_CPUTIME_H
-#define __SH_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SH_CPUTIME_H */
diff --git a/include/asm-sh/current.h b/include/asm-sh/current.h
deleted file mode 100644
index 62b63880b333..000000000000
--- a/include/asm-sh/current.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SH_CURRENT_H
-#define __ASM_SH_CURRENT_H
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- *
- */
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static __inline__ struct task_struct * get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current get_current()
-
-#endif /* __ASM_SH_CURRENT_H */
diff --git a/include/asm-sh/delay.h b/include/asm-sh/delay.h
deleted file mode 100644
index 4b16bf9b56bd..000000000000
--- a/include/asm-sh/delay.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_SH_DELAY_H
-#define __ASM_SH_DELAY_H
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines calling functions in arch/sh/lib/delay.c
- */
-
-extern void __bad_udelay(void);
-extern void __bad_ndelay(void);
-
-extern void __udelay(unsigned long usecs);
-extern void __ndelay(unsigned long nsecs);
-extern void __const_udelay(unsigned long xloops);
-extern void __delay(unsigned long loops);
-
-#define udelay(n) (__builtin_constant_p(n) ? \
-	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
-	__udelay(n))
-
-#define ndelay(n) (__builtin_constant_p(n) ? \
-	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
-	__ndelay(n))
-
-#endif /* __ASM_SH_DELAY_H */
diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-sh/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-sh/div64.h b/include/asm-sh/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-sh/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
deleted file mode 100644
index 22cc419389fe..000000000000
--- a/include/asm-sh/dma-mapping.h
+++ /dev/null
@@ -1,192 +0,0 @@
-#ifndef __ASM_SH_DMA_MAPPING_H
-#define __ASM_SH_DMA_MAPPING_H
-
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
-extern struct bus_type pci_bus_type;
-
-#define dma_supported(dev, mask)	(1)
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
-}
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *vaddr, dma_addr_t dma_handle);
-
-void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-		    enum dma_data_direction dir);
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h) (1)
-
-static inline dma_addr_t dma_map_single(struct device *dev,
-					void *ptr, size_t size,
-					enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return virt_to_phys(ptr);
-#endif
-	dma_cache_sync(dev, ptr, size, dir);
-
-	return virt_to_phys(ptr);
-}
-
-#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
-		sg[i].dma_address = sg_phys(&sg[i]);
-	}
-
-	return nents;
-}
-
-#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction dir)
-{
-	return dma_map_single(dev, page_address(page) + offset, size, dir);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size, enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, dma_address, size, dir);
-}
-
-static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
-				   size_t size, enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return;
-#endif
-	dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
-}
-
-static inline void dma_sync_single_range(struct device *dev,
-					 dma_addr_t dma_handle,
-					 unsigned long offset, size_t size,
-					 enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-	if (dev->bus == &pci_bus_type)
-		return;
-#endif
-	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
-}
-
-static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
-			       int nelems, enum dma_data_direction dir)
-{
-	int i;
-
-	for (i = 0; i < nelems; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
-		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
-		sg[i].dma_address = sg_phys(&sg[i]);
-	}
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction dir)
-{
-	dma_sync_single(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction dir)
-{
-	dma_sync_single(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction direction)
-{
-	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
-}
-
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction dir)
-{
-	dma_sync_sg(dev, sg, nelems, dir);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction dir)
-{
-	dma_sync_sg(dev, sg, nelems, dir);
-}
-
-
-static inline int dma_get_cache_alignment(void)
-{
-	/*
-	 * Each processor family will define its own L1_CACHE_SHIFT,
-	 * L1_CACHE_BYTES wraps to this, so this is always safe.
-	 */
-	return L1_CACHE_BYTES;
-}
-
-static inline int dma_mapping_error(dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-			    dma_addr_t device_addr, size_t size, int flags);
-
-extern void
-dma_release_declared_memory(struct device *dev);
-
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
-				  dma_addr_t device_addr, size_t size);
-
-#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
deleted file mode 100644
index a65b02fd186e..000000000000
--- a/include/asm-sh/dma.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * include/asm-sh/dma.h
- *
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_DMA_H
-#define __ASM_SH_DMA_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-#include <asm/cpu/dma.h>
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
-   occurrence should be flagged as an error.  */
-/* But... */
-/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
-
-#ifdef CONFIG_NR_DMA_CHANNELS
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
-#else
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
-#endif
-
-/*
- * Read and write modes can mean drastically different things depending on the
- * channel configuration. Consult your DMAC documentation and module
- * implementation for further clues.
- */
-#define DMA_MODE_READ		0x00
-#define DMA_MODE_WRITE		0x01
-#define DMA_MODE_MASK		0x01
-
-#define DMA_AUTOINIT		0x10
-
-/*
- * DMAC (dma_info) flags
- */
-enum {
-	DMAC_CHANNELS_CONFIGURED	= 0x01,
-	DMAC_CHANNELS_TEI_CAPABLE	= 0x02,	/* Transfer end interrupt */
-};
-
-/*
- * DMA channel capabilities / flags
- */
-enum {
-	DMA_CONFIGURED			= 0x01,
-
-	/*
-	 * Transfer end interrupt, inherited from DMAC.
-	 * wait_queue used in dma_wait_for_completion.
-	 */
-	DMA_TEI_CAPABLE			= 0x02,
-};
-
-extern spinlock_t dma_spin_lock;
-
-struct dma_channel;
-
-struct dma_ops {
-	int (*request)(struct dma_channel *chan);
-	void (*free)(struct dma_channel *chan);
-
-	int (*get_residue)(struct dma_channel *chan);
-	int (*xfer)(struct dma_channel *chan);
-	int (*configure)(struct dma_channel *chan, unsigned long flags);
-	int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
-};
-
-struct dma_channel {
-	char dev_id[16];		/* unique name per DMAC of channel */
-
-	unsigned int chan;		/* DMAC channel number */
-	unsigned int vchan;		/* Virtual channel number */
-
-	unsigned int mode;
-	unsigned int count;
-
-	unsigned long sar;
-	unsigned long dar;
-
-	const char **caps;
-
-	unsigned long flags;
-	atomic_t busy;
-
-	wait_queue_head_t wait_queue;
-
-	struct sys_device dev;
-	void *priv_data;
-};
-
-struct dma_info {
-	struct platform_device *pdev;
-
-	const char *name;
-	unsigned int nr_channels;
-	unsigned long flags;
-
-	struct dma_ops *ops;
-	struct dma_channel *channels;
-
-	struct list_head list;
-	int first_channel_nr;
-	int first_vchannel_nr;
-};
-
-struct dma_chan_caps {
-	int ch_num;
-	const char **caplist;
-};
-
-#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
-
-/* arch/sh/drivers/dma/dma-api.c */
-extern int dma_xfer(unsigned int chan, unsigned long from,
-		    unsigned long to, size_t size, unsigned int mode);
-
-#define dma_write(chan, from, to, size)	\
-	dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
-#define dma_write_page(chan, from, to)	\
-	dma_write(chan, from, to, PAGE_SIZE)
-
-#define dma_read(chan, from, to, size)	\
-	dma_xfer(chan, from, to, size, DMA_MODE_READ)
-#define dma_read_page(chan, from, to)	\
-	dma_read(chan, from, to, PAGE_SIZE)
-
-extern int request_dma_bycap(const char **dmac, const char **caps,
-			     const char *dev_id);
-extern int request_dma(unsigned int chan, const char *dev_id);
-extern void free_dma(unsigned int chan);
-extern int get_dma_residue(unsigned int chan);
-extern struct dma_info *get_dma_info(unsigned int chan);
-extern struct dma_channel *get_dma_channel(unsigned int chan);
-extern void dma_wait_for_completion(unsigned int chan);
-extern void dma_configure_channel(unsigned int chan, unsigned long flags);
-
-extern int register_dmac(struct dma_info *info);
-extern void unregister_dmac(struct dma_info *info);
-extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
-
-extern int dma_extend(unsigned int chan, unsigned long op, void *param);
-extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
-
-/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
-extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	(0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_DMA_H */
diff --git a/include/asm-sh/dmabrg.h b/include/asm-sh/dmabrg.h
deleted file mode 100644
index c5edba216cf1..000000000000
--- a/include/asm-sh/dmabrg.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * SH7760 DMABRG (USB/Audio) support
- */
-
-#ifndef _DMABRG_H_
-#define _DMABRG_H_
-
-/* IRQ sources */
-#define DMABRGIRQ_USBDMA	0
-#define DMABRGIRQ_USBDMAERR	1
-#define DMABRGIRQ_A0TXF		2
-#define DMABRGIRQ_A0TXH		3
-#define DMABRGIRQ_A0RXF		4
-#define DMABRGIRQ_A0RXH		5
-#define DMABRGIRQ_A1TXF		6
-#define DMABRGIRQ_A1TXH		7
-#define DMABRGIRQ_A1RXF		8
-#define DMABRGIRQ_A1RXH		9
-
-extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *);
-extern void dmabrg_free_irq(unsigned int);
-
-#endif
diff --git a/include/asm-sh/dreamcast/dma.h b/include/asm-sh/dreamcast/dma.h
deleted file mode 100644
index ddd68e788705..000000000000
--- a/include/asm-sh/dreamcast/dma.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-sh/dreamcast/dma.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_DREAMCAST_DMA_H
-#define __ASM_SH_DREAMCAST_DMA_H
-
-/* Number of DMA channels */
-#define ONCHIP_NR_DMA_CHANNELS	4
-#define G2_NR_DMA_CHANNELS	4
-#define PVR2_NR_DMA_CHANNELS	1
-
-/* Channels for cascading */
-#define PVR2_CASCADE_CHAN	2
-#define G2_CASCADE_CHAN		3
-
-/* PVR2 DMA Registers */
-#define PVR2_DMA_BASE		0xa05f6800
-#define PVR2_DMA_ADDR		(PVR2_DMA_BASE + 0)
-#define PVR2_DMA_COUNT		(PVR2_DMA_BASE + 4)
-#define PVR2_DMA_MODE		(PVR2_DMA_BASE + 8)
-#define PVR2_DMA_LMMODE0	(PVR2_DMA_BASE + 132)
-#define PVR2_DMA_LMMODE1	(PVR2_DMA_BASE + 136)
-
-/* G2 DMA Register */
-#define G2_DMA_BASE		0xa05f7800
-
-#endif /* __ASM_SH_DREAMCAST_DMA_H */
-
diff --git a/include/asm-sh/dreamcast/maple.h b/include/asm-sh/dreamcast/maple.h
deleted file mode 100644
index 51f6a87f1f11..000000000000
--- a/include/asm-sh/dreamcast/maple.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __ASM_MAPLE_H
-#define __ASM_MAPLE_H
-
-#define MAPLE_PORTS 4
-#define MAPLE_PNP_INTERVAL HZ
-#define MAPLE_MAXPACKETS 8
-#define MAPLE_DMA_ORDER 14
-#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
-#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
-			  MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
-
-/* Maple Bus registers */
-#define MAPLE_BASE     0xa05f6c00
-#define MAPLE_DMAADDR  (MAPLE_BASE+0x04)
-#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
-#define MAPLE_ENABLE   (MAPLE_BASE+0x14)
-#define MAPLE_STATE    (MAPLE_BASE+0x18)
-#define MAPLE_SPEED    (MAPLE_BASE+0x80)
-#define MAPLE_RESET    (MAPLE_BASE+0x8c)
-
-#define MAPLE_MAGIC    0x6155404f
-#define MAPLE_2MBPS    0
-#define MAPLE_TIMEOUT(n) ((n)<<15)
-
-/* Function codes */
-#define MAPLE_FUNC_CONTROLLER 0x001
-#define MAPLE_FUNC_MEMCARD    0x002
-#define MAPLE_FUNC_LCD        0x004
-#define MAPLE_FUNC_CLOCK      0x008
-#define MAPLE_FUNC_MICROPHONE 0x010
-#define MAPLE_FUNC_ARGUN      0x020
-#define MAPLE_FUNC_KEYBOARD   0x040
-#define MAPLE_FUNC_LIGHTGUN   0x080
-#define MAPLE_FUNC_PURUPURU   0x100
-#define MAPLE_FUNC_MOUSE      0x200
-
-#endif /* __ASM_MAPLE_H */
diff --git a/include/asm-sh/dreamcast/pci.h b/include/asm-sh/dreamcast/pci.h
deleted file mode 100644
index e401b24b0d8e..000000000000
--- a/include/asm-sh/dreamcast/pci.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-sh/dreamcast/pci.h
- *
- * Copyright (C) 2001, 2002  M. R. Brown
- * Copyright (C) 2002, 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_DREAMCAST_PCI_H
-#define __ASM_SH_DREAMCAST_PCI_H
-
-#include <asm/mach/sysasic.h>
-
-#define	GAPSPCI_REGS		0x01001400
-#define GAPSPCI_DMA_BASE	0x01840000
-#define GAPSPCI_DMA_SIZE	32768
-#define GAPSPCI_BBA_CONFIG	0x01001600
-#define GAPSPCI_BBA_CONFIG_SIZE	0x2000
-
-#define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
-
-#endif /* __ASM_SH_DREAMCAST_PCI_H */
-
diff --git a/include/asm-sh/dreamcast/sysasic.h b/include/asm-sh/dreamcast/sysasic.h
deleted file mode 100644
index f33426608a87..000000000000
--- a/include/asm-sh/dreamcast/sysasic.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* include/asm-sh/dreamcast/sysasic.h
- *
- * Definitions for the Dreamcast System ASIC and related peripherals.
- *
- * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- */
-#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
-#define __ASM_SH_DREAMCAST_SYSASIC_H
-
-#include <asm/irq.h>
-
-/* Hardware events -
-
-   Each of these events correspond to a bit within the Event Mask Registers/
-   Event Status Registers.  Because of the virtual IRQ numbering scheme, a
-   base offset must be used when calculating the virtual IRQ that each event
-   takes.
-*/
-
-#define HW_EVENT_IRQ_BASE  48
-
-/* IRQ 13 */
-#define HW_EVENT_VSYNC     (HW_EVENT_IRQ_BASE +  5) /* VSync */
-#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
-#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
-#define HW_EVENT_G2_DMA    (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
-#define HW_EVENT_PVR2_DMA  (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
-
-/* IRQ 11 */
-#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
-#define HW_EVENT_AICA_SYS  (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
-#define HW_EVENT_EXTERNAL  (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
-
-#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
-
-#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
-
diff --git a/include/asm-sh/edosk7705.h b/include/asm-sh/edosk7705.h
deleted file mode 100644
index 5bdc9d9be3de..000000000000
--- a/include/asm-sh/edosk7705.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-sh/edosk7705.h
- *
- * Modified version of io_se.h for the EDOSK7705 specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for an Hitachi EDOSK7705 development board
- */
-
-#ifndef __ASM_SH_EDOSK7705_IO_H
-#define __ASM_SH_EDOSK7705_IO_H
-
-#include <asm/io_generic.h>
-
-extern unsigned char sh_edosk7705_inb(unsigned long port);
-extern unsigned int sh_edosk7705_inl(unsigned long port);
-
-extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
-extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
-
-extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_EDOSK7705_IO_H */
diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h
deleted file mode 100644
index 05092da1aa59..000000000000
--- a/include/asm-sh/elf.h
+++ /dev/null
@@ -1,193 +0,0 @@
-#ifndef __ASM_SH_ELF_H
-#define __ASM_SH_ELF_H
-
-#include <asm/auxvec.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/* SH (particularly SHcompact) relocation types  */
-#define	R_SH_NONE		0
-#define	R_SH_DIR32		1
-#define	R_SH_REL32		2
-#define	R_SH_DIR8WPN		3
-#define	R_SH_IND12W		4
-#define	R_SH_DIR8WPL		5
-#define	R_SH_DIR8WPZ		6
-#define	R_SH_DIR8BP		7
-#define	R_SH_DIR8W		8
-#define	R_SH_DIR8L		9
-#define	R_SH_SWITCH16		25
-#define	R_SH_SWITCH32		26
-#define	R_SH_USES		27
-#define	R_SH_COUNT		28
-#define	R_SH_ALIGN		29
-#define	R_SH_CODE		30
-#define	R_SH_DATA		31
-#define	R_SH_LABEL		32
-#define	R_SH_SWITCH8		33
-#define	R_SH_GNU_VTINHERIT	34
-#define	R_SH_GNU_VTENTRY	35
-#define	R_SH_TLS_GD_32		144
-#define	R_SH_TLS_LD_32		145
-#define	R_SH_TLS_LDO_32		146
-#define	R_SH_TLS_IE_32		147
-#define	R_SH_TLS_LE_32		148
-#define	R_SH_TLS_DTPMOD32	149
-#define	R_SH_TLS_DTPOFF32	150
-#define	R_SH_TLS_TPOFF32	151
-#define	R_SH_GOT32		160
-#define	R_SH_PLT32		161
-#define	R_SH_COPY		162
-#define	R_SH_GLOB_DAT		163
-#define	R_SH_JMP_SLOT		164
-#define	R_SH_RELATIVE		165
-#define	R_SH_GOTOFF		166
-#define	R_SH_GOTPC		167
-/* SHmedia relocs */
-#define R_SH_IMM_LOW16		246
-#define R_SH_IMM_LOW16_PCREL	247
-#define R_SH_IMM_MEDLOW16	248
-#define R_SH_IMM_MEDLOW16_PCREL	249
-/* Keep this the last entry.  */
-#define	R_SH_NUM		256
-
-/*
- * ELF register definitions..
- */
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA	ELFDATA2LSB
-#else
-#define ELF_DATA	ELFDATA2MSB
-#endif
-#define ELF_ARCH	EM_SH
-
-#ifdef __KERNEL__
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ( (x)->e_machine == EM_SH )
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
-
-#define ELF_CORE_COPY_REGS(_dest,_regs)				\
-	memcpy((char *) &_dest, (char *) _regs,			\
-	       sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This could be done in user space,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP	(boot_cpu_data.flags)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM	(utsname()->machine)
-
-#ifdef __SH5__
-#define ELF_PLAT_INIT(_r, load_addr) \
-  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
-       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
-       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
-       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
-       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
-       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
-       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
-       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
-       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
-       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
-       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
-       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
-       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
-       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
-       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
-       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
-       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
-       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
-       _r->sr = SR_FD | SR_MMU; } while (0)
-#else
-#define ELF_PLAT_INIT(_r, load_addr) \
-  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
-       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
-       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
-       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
-       _r->sr = SR_FD; } while (0)
-#endif
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-struct task_struct;
-extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
-
-#ifdef CONFIG_VSYSCALL
-/* vDSO has arch_setup_additional_pages */
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
-				       int executable_stack);
-
-extern unsigned int vdso_enabled;
-extern void __kernel_vsyscall;
-
-#define VDSO_BASE		((unsigned long)current->mm->context.vdso)
-#define VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
-
-#define VSYSCALL_AUX_ENT					\
-	if (vdso_enabled)					\
-		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
-#else
-#define VSYSCALL_AUX_ENT
-#endif /* CONFIG_VSYSCALL */
-
-#ifdef CONFIG_SH_FPU
-#define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
-#else
-#define FPU_AUX_ENT
-#endif
-
-extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
-
-/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO						\
-do {								\
-	/* Optional FPU initialization */			\
-	FPU_AUX_ENT;						\
-								\
-	/* Optional vsyscall entry */				\
-	VSYSCALL_AUX_ENT;					\
-								\
-	/* Cache desc */					\
-	NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);	\
-	NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);	\
-	NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);		\
-} while (0)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_ELF_H */
diff --git a/include/asm-sh/emergency-restart.h b/include/asm-sh/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-sh/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S
deleted file mode 100644
index 2dab0b8d9454..000000000000
--- a/include/asm-sh/entry-macros.S
+++ /dev/null
@@ -1,33 +0,0 @@
-! entry.S macro define
-	
-	.macro	cli
-	stc	sr, r0
-	or	#0xf0, r0
-	ldc	r0, sr
-	.endm
-
-	.macro	sti
-	mov	#0xf0, r11
-	extu.b	r11, r11
-	not	r11, r11
-	stc	sr, r10
-	and	r11, r10
-#ifdef CONFIG_CPU_HAS_SR_RB
-	stc	k_g_imask, r11
-	or	r11, r10
-#endif
-	ldc	r10, sr
-	.endm
-
-	.macro	get_current_thread_info, ti, tmp
-#ifdef CONFIG_CPU_HAS_SR_RB
-	stc	r7_bank, \ti
-#else
-	mov	#((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
-	shll8	\tmp
-	shll2	\tmp
-	mov	r15, \ti
-	and	\tmp, \ti
-#endif	
-	.endm
-
diff --git a/include/asm-sh/errno.h b/include/asm-sh/errno.h
deleted file mode 100644
index 51cf6f9cebb8..000000000000
--- a/include/asm-sh/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_ERRNO_H
-#define __ASM_SH_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_SH_ERRNO_H */
diff --git a/include/asm-sh/fb.h b/include/asm-sh/fb.h
deleted file mode 100644
index d92e99cd8c8a..000000000000
--- a/include/asm-sh/fb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-sh/fcntl.h b/include/asm-sh/fcntl.h
deleted file mode 100644
index 46ab12db5739..000000000000
--- a/include/asm-sh/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>
diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h
deleted file mode 100644
index 721fcc4d5e98..000000000000
--- a/include/asm-sh/fixmap.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- */
-
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-#include <linux/kernel.h>
-#include <asm/page.h>
-#ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#endif
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special  addresses
- * from the end of P3 backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-
-/*
- * on UP currently we will have no trace of the fixmap mechanizm,
- * no page table allocations, etc. This might change in the
- * future, say framebuffers for the console driver(s) could be
- * fix-mapped?
- */
-enum fixed_addresses {
-#define FIX_N_COLOURS 16
-	FIX_CMAP_BEGIN,
-	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
-	FIX_UNCACHED,
-#ifdef CONFIG_HIGHMEM
-	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#endif
-	__end_of_fixed_addresses
-};
-
-extern void __set_fixmap(enum fixed_addresses idx,
-			 unsigned long phys, pgprot_t flags);
-
-#define set_fixmap(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL)
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-/*
- * used by vmalloc.c.
- *
- * Leave one empty page between vmalloc'ed areas and
- * the start of the fixmap, and leave one page empty
- * at the top of mem..
- */
-#ifdef CONFIG_SUPERH32
-#define FIXADDR_TOP	(P4SEG - PAGE_SIZE)
-#else
-#define FIXADDR_TOP	(0xff000000 - PAGE_SIZE)
-#endif
-#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
-#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
-
-#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without tranlation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static inline unsigned long fix_to_virt(const unsigned int idx)
-{
-	/*
-	 * this branch gets completely eliminated after inlining,
-	 * except when someone tries to use fixaddr indices in an
-	 * illegal way. (such as mixing up address types or using
-	 * out-of-range indices).
-	 *
-	 * If it doesn't get removed, the linker will complain
-	 * loudly with a reasonably clear error message..
-	 */
-	if (idx >= __end_of_fixed_addresses)
-		__this_fixmap_does_not_exist();
-
-        return __fix_to_virt(idx);
-}
-
-static inline unsigned long virt_to_fix(const unsigned long vaddr)
-{
-	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
-	return __virt_to_fix(vaddr);
-}
-#endif
diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h
deleted file mode 100644
index 0cc800299e06..000000000000
--- a/include/asm-sh/flat.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/asm-sh/flat.h
- *
- * uClinux flat-format executables
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive for
- * more details.
- */
-#ifndef __ASM_SH_FLAT_H
-#define __ASM_SH_FLAT_H
-
-#define	flat_stack_align(sp)			/* nothing needed */
-#define	flat_argvp_envp_on_stack()		0
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		({ (void)p; 0; })
-
-#endif /* __ASM_SH_FLAT_H */
diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h
deleted file mode 100644
index 91462fea1507..000000000000
--- a/include/asm-sh/fpu.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef __ASM_SH_FPU_H
-#define __ASM_SH_FPU_H
-
-#ifndef __ASSEMBLY__
-#include <linux/preempt.h>
-#include <asm/ptrace.h>
-
-#ifdef CONFIG_SH_FPU
-static inline void release_fpu(struct pt_regs *regs)
-{
-	regs->sr |= SR_FD;
-}
-
-static inline void grab_fpu(struct pt_regs *regs)
-{
-	regs->sr &= ~SR_FD;
-}
-
-struct task_struct;
-
-extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
-#else
-
-#define release_fpu(regs)	do { } while (0)
-#define grab_fpu(regs)		do { } while (0)
-
-static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
-	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
-}
-#endif
-
-extern int do_fpu_inst(unsigned short, struct pt_regs *);
-
-static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
-	preempt_disable();
-	if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
-		save_fpu(tsk, regs);
-	preempt_enable();
-}
-
-static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
-	preempt_disable();
-	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
-		clear_tsk_thread_flag(tsk, TIF_USEDFPU);
-		release_fpu(regs);
-	}
-	preempt_enable();
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_FPU_H */
diff --git a/include/asm-sh/freq.h b/include/asm-sh/freq.h
deleted file mode 100644
index 39c0e091cf58..000000000000
--- a/include/asm-sh/freq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * include/asm-sh/freq.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __ASM_SH_FREQ_H
-#define __ASM_SH_FREQ_H
-#ifdef __KERNEL__
-
-#include <asm/cpu/freq.h>
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/futex-irq.h b/include/asm-sh/futex-irq.h
deleted file mode 100644
index a9f16a7f9aea..000000000000
--- a/include/asm-sh/futex-irq.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef __ASM_SH_FUTEX_IRQ_H
-#define __ASM_SH_FUTEX_IRQ_H
-
-#include <asm/system.h>
-
-static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr,
-					   int *oldval)
-{
-	unsigned long flags;
-	int ret;
-
-	local_irq_save(flags);
-
-	ret = get_user(*oldval, uaddr);
-	if (!ret)
-		ret = put_user(oparg, uaddr);
-
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr,
-					   int *oldval)
-{
-	unsigned long flags;
-	int ret;
-
-	local_irq_save(flags);
-
-	ret = get_user(*oldval, uaddr);
-	if (!ret)
-		ret = put_user(*oldval + oparg, uaddr);
-
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr,
-					  int *oldval)
-{
-	unsigned long flags;
-	int ret;
-
-	local_irq_save(flags);
-
-	ret = get_user(*oldval, uaddr);
-	if (!ret)
-		ret = put_user(*oldval | oparg, uaddr);
-
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr,
-					   int *oldval)
-{
-	unsigned long flags;
-	int ret;
-
-	local_irq_save(flags);
-
-	ret = get_user(*oldval, uaddr);
-	if (!ret)
-		ret = put_user(*oldval & oparg, uaddr);
-
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr,
-					   int *oldval)
-{
-	unsigned long flags;
-	int ret;
-
-	local_irq_save(flags);
-
-	ret = get_user(*oldval, uaddr);
-	if (!ret)
-		ret = put_user(*oldval ^ oparg, uaddr);
-
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr,
-						   int oldval, int newval)
-{
-	unsigned long flags;
-	int ret, prev = 0;
-
-	local_irq_save(flags);
-
-	ret = get_user(prev, uaddr);
-	if (!ret && oldval == prev)
-		ret = put_user(newval, uaddr);
-
-	local_irq_restore(flags);
-
-	if (ret)
-		return ret;
-
-	return prev;
-}
-
-#endif /* __ASM_SH_FUTEX_IRQ_H */
diff --git a/include/asm-sh/futex.h b/include/asm-sh/futex.h
deleted file mode 100644
index 68256ec5fa35..000000000000
--- a/include/asm-sh/futex.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef __ASM_SH_FUTEX_H
-#define __ASM_SH_FUTEX_H
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-/* XXX: UP variants, fix for SH-4A and SMP.. */
-#include <asm/futex-irq.h>
-
-static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	pagefault_disable();
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval);
-		break;
-	case FUTEX_OP_ADD:
-		ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval);
-		break;
-	case FUTEX_OP_OR:
-		ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval);
-		break;
-	case FUTEX_OP_ANDN:
-		ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval);
-		break;
-	case FUTEX_OP_XOR:
-		ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval);
-		break;
-	default:
-		ret = -ENOSYS;
-		break;
-	}
-
-	pagefault_enable();
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
-
-	return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
-	return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval);
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_FUTEX_H */
diff --git a/include/asm-sh/gpio.h b/include/asm-sh/gpio.h
deleted file mode 100644
index 9bb27e0f11a4..000000000000
--- a/include/asm-sh/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  include/asm-sh/gpio.h
- *
- *  Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- *  Addresses for the Pin Function Controller
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_GPIO_H
-#define __ASM_SH_GPIO_H
-
-#if defined(CONFIG_CPU_SH3)
-#include <asm/cpu/gpio.h>
-#endif
-
-#endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hardirq.h b/include/asm-sh/hardirq.h
deleted file mode 100644
index 715ee237fc77..000000000000
--- a/include/asm-sh/hardirq.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_SH_HARDIRQ_H
-#define __ASM_SH_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-extern void ack_bad_irq(unsigned int irq);
-
-#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h
deleted file mode 100644
index 8c1353baf00f..000000000000
--- a/include/asm-sh/hd64461.h
+++ /dev/null
@@ -1,250 +0,0 @@
-#ifndef __ASM_SH_HD64461
-#define __ASM_SH_HD64461
-/*
- *	Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *	Copyright (C) 2004 Paul Mundt
- *	Copyright (C) 2000 YAEGASHI Takeshi
- *
- *		Hitachi HD64461 companion chip support
- *	(please note manual reference 0x10000000 = 0xb0000000)
- */
-
-/* Constants for PCMCIA mappings */
-#define	HD64461_PCC_WINDOW	0x01000000
-
-/* Area 6 - Slot 0 - memory and/or IO card */
-#define	HD64461_PCC0_BASE	(CONFIG_HD64461_IOBASE + 0x8000000)
-#define	HD64461_PCC0_ATTR	(HD64461_PCC0_BASE)				/* 0xb80000000 */
-#define	HD64461_PCC0_COMM	(HD64461_PCC0_BASE+HD64461_PCC_WINDOW)		/* 0xb90000000 */
-#define	HD64461_PCC0_IO		(HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW)	/* 0xba0000000 */
-
-/* Area 5 - Slot 1 - memory card only */
-#define	HD64461_PCC1_BASE	(CONFIG_HD64461_IOBASE + 0x4000000)
-#define	HD64461_PCC1_ATTR	(HD64461_PCC1_BASE)				/* 0xb4000000 */
-#define	HD64461_PCC1_COMM	(HD64461_PCC1_BASE+HD64461_PCC_WINDOW)		/* 0xb5000000 */
-
-/* Standby Control Register for HD64461 */
-#define	HD64461_STBCR			CONFIG_HD64461_IOBASE
-#define	HD64461_STBCR_CKIO_STBY		0x2000
-#define	HD64461_STBCR_SAFECKE_IST	0x1000
-#define	HD64461_STBCR_SLCKE_IST		0x0800
-#define	HD64461_STBCR_SAFECKE_OST	0x0400
-#define	HD64461_STBCR_SLCKE_OST		0x0200
-#define	HD64461_STBCR_SMIAST		0x0100
-#define	HD64461_STBCR_SLCDST		0x0080
-#define	HD64461_STBCR_SPC0ST		0x0040
-#define	HD64461_STBCR_SPC1ST		0x0020
-#define	HD64461_STBCR_SAFEST		0x0010
-#define	HD64461_STBCR_STM0ST		0x0008
-#define	HD64461_STBCR_STM1ST		0x0004
-#define	HD64461_STBCR_SIRST		0x0002
-#define	HD64461_STBCR_SURTST		0x0001
-
-/* System Configuration Register */
-#define	HD64461_SYSCR		(CONFIG_HD64461_IOBASE + 0x02)
-
-/* CPU Data Bus Control Register */
-#define	HD64461_SCPUCR		(CONFIG_HD64461_IOBASE + 0x04)
-
-/* Base Address Register */
-#define	HD64461_LCDCBAR		(CONFIG_HD64461_IOBASE + 0x1000)
-
-/* Line increment address */
-#define	HD64461_LCDCLOR		(CONFIG_HD64461_IOBASE + 0x1002)
-
-/* Controls LCD controller */
-#define	HD64461_LCDCCR		(CONFIG_HD64461_IOBASE + 0x1004)
-
-/* LCCDR control bits */
-#define	HD64461_LCDCCR_STBACK	0x0400	/* Standby Back */
-#define	HD64461_LCDCCR_STREQ	0x0100	/* Standby Request */
-#define	HD64461_LCDCCR_MOFF	0x0080	/* Memory Off */
-#define	HD64461_LCDCCR_REFSEL	0x0040	/* Refresh Select */
-#define	HD64461_LCDCCR_EPON	0x0020	/* End Power On */
-#define	HD64461_LCDCCR_SPON	0x0010	/* Start Power On */
-
-/* Controls LCD (1) */
-#define	HD64461_LDR1		(CONFIG_HD64461_IOBASE + 0x1010)
-#define	HD64461_LDR1_DON	0x01	/* Display On */
-#define	HD64461_LDR1_DINV	0x80	/* Display Invert */
-
-/* Controls LCD (2) */
-#define	HD64461_LDR2		(CONFIG_HD64461_IOBASE + 0x1012)
-#define	HD64461_LDHNCR		(CONFIG_HD64461_IOBASE + 0x1014)	/* Number of horizontal characters */
-#define	HD64461_LDHNSR		(CONFIG_HD64461_IOBASE + 0x1016)	/* Specify output start position + width of CL1 */
-#define	HD64461_LDVNTR		(CONFIG_HD64461_IOBASE + 0x1018)	/* Specify total vertical lines */
-#define	HD64461_LDVNDR		(CONFIG_HD64461_IOBASE + 0x101a)	/* specify number of display vertical lines */
-#define	HD64461_LDVSPR		(CONFIG_HD64461_IOBASE + 0x101c)	/* specify vertical synchronization pos and AC nr */
-
-/* Controls LCD (3) */
-#define	HD64461_LDR3		(CONFIG_HD64461_IOBASE + 0x101e)
-
-/* Palette Registers */
-#define	HD64461_CPTWAR		(CONFIG_HD64461_IOBASE + 0x1030)	/* Color Palette Write Address Register */
-#define	HD64461_CPTWDR		(CONFIG_HD64461_IOBASE + 0x1032)	/* Color Palette Write Data Register */
-#define	HD64461_CPTRAR		(CONFIG_HD64461_IOBASE + 0x1034)	/* Color Palette Read Address Register */
-#define	HD64461_CPTRDR		(CONFIG_HD64461_IOBASE + 0x1036)	/* Color Palette Read Data Register */
-
-#define	HD64461_GRDOR		(CONFIG_HD64461_IOBASE + 0x1040)	/* Display Resolution Offset Register */
-#define	HD64461_GRSCR		(CONFIG_HD64461_IOBASE + 0x1042)	/* Solid Color Register */
-#define	HD64461_GRCFGR		(CONFIG_HD64461_IOBASE + 0x1044)	/* Accelerator Configuration Register */
-
-#define	HD64461_GRCFGR_ACCSTATUS	0x10	/* Accelerator Status */
-#define	HD64461_GRCFGR_ACCRESET		0x08	/* Accelerator Reset */
-#define	HD64461_GRCFGR_ACCSTART_BITBLT	0x06	/* Accelerator Start BITBLT */
-#define	HD64461_GRCFGR_ACCSTART_LINE	0x04	/* Accelerator Start Line Drawing */
-#define	HD64461_GRCFGR_COLORDEPTH16	0x01	/* Sets Colordepth 16 for Accelerator */
-#define	HD64461_GRCFGR_COLORDEPTH8	0x01	/* Sets Colordepth 8 for Accelerator */
-
-/* Line Drawing Registers */
-#define	HD64461_LNSARH		(CONFIG_HD64461_IOBASE + 0x1046)	/* Line Start Address Register (H) */
-#define	HD64461_LNSARL		(CONFIG_HD64461_IOBASE + 0x1048)	/* Line Start Address Register (L) */
-#define	HD64461_LNAXLR		(CONFIG_HD64461_IOBASE + 0x104a)	/* Axis Pixel Length Register */
-#define	HD64461_LNDGR		(CONFIG_HD64461_IOBASE + 0x104c)	/* Diagonal Register */
-#define	HD64461_LNAXR		(CONFIG_HD64461_IOBASE + 0x104e)	/* Axial Register */
-#define	HD64461_LNERTR		(CONFIG_HD64461_IOBASE + 0x1050)	/* Start Error Term Register */
-#define	HD64461_LNMDR		(CONFIG_HD64461_IOBASE + 0x1052)	/* Line Mode Register */
-
-/* BitBLT Registers */
-#define	HD64461_BBTSSARH	(CONFIG_HD64461_IOBASE + 0x1054)	/* Source Start Address Register (H) */
-#define	HD64461_BBTSSARL	(CONFIG_HD64461_IOBASE + 0x1056)	/* Source Start Address Register (L) */
-#define	HD64461_BBTDSARH	(CONFIG_HD64461_IOBASE + 0x1058)	/* Destination Start Address Register (H) */
-#define	HD64461_BBTDSARL	(CONFIG_HD64461_IOBASE + 0x105a)	/* Destination Start Address Register (L) */
-#define	HD64461_BBTDWR		(CONFIG_HD64461_IOBASE + 0x105c)	/* Destination Block Width Register */
-#define	HD64461_BBTDHR		(CONFIG_HD64461_IOBASE + 0x105e)	/* Destination Block Height Register */
-#define	HD64461_BBTPARH		(CONFIG_HD64461_IOBASE + 0x1060)	/* Pattern Start Address Register (H) */
-#define	HD64461_BBTPARL		(CONFIG_HD64461_IOBASE + 0x1062)	/* Pattern Start Address Register (L) */
-#define	HD64461_BBTMARH		(CONFIG_HD64461_IOBASE + 0x1064)	/* Mask Start Address Register (H) */
-#define	HD64461_BBTMARL		(CONFIG_HD64461_IOBASE + 0x1066)	/* Mask Start Address Register (L) */
-#define	HD64461_BBTROPR		(CONFIG_HD64461_IOBASE + 0x1068)	/* ROP Register */
-#define	HD64461_BBTMDR		(CONFIG_HD64461_IOBASE + 0x106a)	/* BitBLT Mode Register */
-
-/* PC Card Controller Registers */
-/* Maps to Physical Area 6 */
-#define	HD64461_PCC0ISR		(CONFIG_HD64461_IOBASE + 0x2000)	/* socket 0 interface status */
-#define	HD64461_PCC0GCR		(CONFIG_HD64461_IOBASE + 0x2002)	/* socket 0 general control */
-#define	HD64461_PCC0CSCR	(CONFIG_HD64461_IOBASE + 0x2004)	/* socket 0 card status change */
-#define	HD64461_PCC0CSCIER	(CONFIG_HD64461_IOBASE + 0x2006)	/* socket 0 card status change interrupt enable */
-#define	HD64461_PCC0SCR		(CONFIG_HD64461_IOBASE + 0x2008)	/* socket 0 software control */
-/* Maps to Physical Area 5 */
-#define	HD64461_PCC1ISR		(CONFIG_HD64461_IOBASE + 0x2010)	/* socket 1 interface status */
-#define	HD64461_PCC1GCR		(CONFIG_HD64461_IOBASE + 0x2012)	/* socket 1 general control */
-#define	HD64461_PCC1CSCR	(CONFIG_HD64461_IOBASE + 0x2014)	/* socket 1 card status change */
-#define	HD64461_PCC1CSCIER	(CONFIG_HD64461_IOBASE + 0x2016)	/* socket 1 card status change interrupt enable */
-#define	HD64461_PCC1SCR		(CONFIG_HD64461_IOBASE + 0x2018)	/* socket 1 software control */
-
-/* PCC Interface Status Register */
-#define	HD64461_PCCISR_READY		0x80	/* card ready */
-#define	HD64461_PCCISR_MWP		0x40	/* card write-protected */
-#define	HD64461_PCCISR_VS2		0x20	/* voltage select pin 2 */
-#define	HD64461_PCCISR_VS1		0x10	/* voltage select pin 1 */
-#define	HD64461_PCCISR_CD2		0x08	/* card detect 2 */
-#define	HD64461_PCCISR_CD1		0x04	/* card detect 1 */
-#define	HD64461_PCCISR_BVD2		0x02	/* battery 1 */
-#define	HD64461_PCCISR_BVD1		0x01	/* battery 1 */
-
-#define	HD64461_PCCISR_PCD_MASK		0x0c	/* card detect */
-#define	HD64461_PCCISR_BVD_MASK		0x03	/* battery voltage */
-#define	HD64461_PCCISR_BVD_BATGOOD	0x03	/* battery good */
-#define	HD64461_PCCISR_BVD_BATWARN	0x01	/* battery low warning */
-#define	HD64461_PCCISR_BVD_BATDEAD1	0x02	/* battery dead */
-#define	HD64461_PCCISR_BVD_BATDEAD2	0x00	/* battery dead */
-
-/* PCC General Control Register */
-#define	HD64461_PCCGCR_DRVE		0x80	/* output drive */
-#define	HD64461_PCCGCR_PCCR		0x40	/* PC card reset */
-#define	HD64461_PCCGCR_PCCT		0x20	/* PC card type, 1=IO&mem, 0=mem */
-#define	HD64461_PCCGCR_VCC0		0x10	/* voltage control pin VCC0SEL0 */
-#define	HD64461_PCCGCR_PMMOD		0x08	/* memory mode */
-#define	HD64461_PCCGCR_PA25		0x04	/* pin A25 */
-#define	HD64461_PCCGCR_PA24		0x02	/* pin A24 */
-#define	HD64461_PCCGCR_REG		0x01	/* pin PCC0REG# */
-
-/* PCC Card Status Change Register */
-#define	HD64461_PCCCSCR_SCDI		0x80	/* sw card detect intr */
-#define	HD64461_PCCCSCR_SRV1		0x40	/* reserved */
-#define	HD64461_PCCCSCR_IREQ		0x20	/* IREQ intr req */
-#define	HD64461_PCCCSCR_SC		0x10	/* STSCHG (status change) pin */
-#define	HD64461_PCCCSCR_CDC		0x08	/* CD (card detect) change */
-#define	HD64461_PCCCSCR_RC		0x04	/* READY change */
-#define	HD64461_PCCCSCR_BW		0x02	/* battery warning change */
-#define	HD64461_PCCCSCR_BD		0x01	/* battery dead change */
-
-/* PCC Card Status Change Interrupt Enable Register */
-#define	HD64461_PCCCSCIER_CRE		0x80	/* change reset enable */
-#define	HD64461_PCCCSCIER_IREQE_MASK	0x60	/* IREQ enable */
-#define	HD64461_PCCCSCIER_IREQE_DISABLED 0x00	/* IREQ disabled */
-#define	HD64461_PCCCSCIER_IREQE_LEVEL	0x20	/* IREQ level-triggered */
-#define	HD64461_PCCCSCIER_IREQE_FALLING	0x40	/* IREQ falling-edge-trig */
-#define	HD64461_PCCCSCIER_IREQE_RISING	0x60	/* IREQ rising-edge-trig */
-
-#define	HD64461_PCCCSCIER_SCE		0x10	/* status change enable */
-#define	HD64461_PCCCSCIER_CDE		0x08	/* card detect change enable */
-#define	HD64461_PCCCSCIER_RE		0x04	/* ready change enable */
-#define	HD64461_PCCCSCIER_BWE		0x02	/* battery warn change enable */
-#define	HD64461_PCCCSCIER_BDE		0x01	/* battery dead change enable*/
-
-/* PCC Software Control Register */
-#define	HD64461_PCCSCR_VCC1		0x02	/* voltage control pin 1 */
-#define	HD64461_PCCSCR_SWP		0x01	/* write protect */
-
-/* PCC0 Output Pins Control Register */
-#define	HD64461_P0OCR		(CONFIG_HD64461_IOBASE + 0x202a)
-
-/* PCC1 Output Pins Control Register */
-#define	HD64461_P1OCR		(CONFIG_HD64461_IOBASE + 0x202c)
-
-/* PC Card General Control Register */
-#define	HD64461_PGCR		(CONFIG_HD64461_IOBASE + 0x202e)
-
-/* Port Control Registers */
-#define	HD64461_GPACR		(CONFIG_HD64461_IOBASE + 0x4000)	/* Port A - Handles IRDA/TIMER */
-#define	HD64461_GPBCR		(CONFIG_HD64461_IOBASE + 0x4002)	/* Port B - Handles UART */
-#define	HD64461_GPCCR		(CONFIG_HD64461_IOBASE + 0x4004)	/* Port C - Handles PCMCIA 1 */
-#define	HD64461_GPDCR		(CONFIG_HD64461_IOBASE + 0x4006)	/* Port D - Handles PCMCIA 1 */
-
-/* Port Control Data Registers */
-#define	HD64461_GPADR		(CONFIG_HD64461_IOBASE + 0x4010)	/* A */
-#define	HD64461_GPBDR		(CONFIG_HD64461_IOBASE + 0x4012)	/* B */
-#define	HD64461_GPCDR		(CONFIG_HD64461_IOBASE + 0x4014)	/* C */
-#define	HD64461_GPDDR		(CONFIG_HD64461_IOBASE + 0x4016)	/* D */
-
-/* Interrupt Control Registers */
-#define	HD64461_GPAICR		(CONFIG_HD64461_IOBASE + 0x4020)	/* A */
-#define	HD64461_GPBICR		(CONFIG_HD64461_IOBASE + 0x4022)	/* B */
-#define	HD64461_GPCICR		(CONFIG_HD64461_IOBASE + 0x4024)	/* C */
-#define	HD64461_GPDICR		(CONFIG_HD64461_IOBASE + 0x4026)	/* D */
-
-/* Interrupt Status Registers */
-#define	HD64461_GPAISR		(CONFIG_HD64461_IOBASE + 0x4040)	/* A */
-#define	HD64461_GPBISR		(CONFIG_HD64461_IOBASE + 0x4042)	/* B */
-#define	HD64461_GPCISR		(CONFIG_HD64461_IOBASE + 0x4044)	/* C */
-#define	HD64461_GPDISR		(CONFIG_HD64461_IOBASE + 0x4046)	/* D */
-
-/* Interrupt Request Register & Interrupt Mask Register */
-#define	HD64461_NIRR		(CONFIG_HD64461_IOBASE + 0x5000)
-#define	HD64461_NIMR		(CONFIG_HD64461_IOBASE + 0x5002)
-
-#define	HD64461_IRQBASE		OFFCHIP_IRQ_BASE
-#define	OFFCHIP_IRQ_BASE	64
-#define	HD64461_IRQ_NUM		16
-
-#define	HD64461_IRQ_UART	(HD64461_IRQBASE+5)
-#define	HD64461_IRQ_IRDA	(HD64461_IRQBASE+6)
-#define	HD64461_IRQ_TMU1	(HD64461_IRQBASE+9)
-#define	HD64461_IRQ_TMU0	(HD64461_IRQBASE+10)
-#define	HD64461_IRQ_GPIO	(HD64461_IRQBASE+11)
-#define	HD64461_IRQ_AFE		(HD64461_IRQBASE+12)
-#define	HD64461_IRQ_PCC1	(HD64461_IRQBASE+13)
-#define	HD64461_IRQ_PCC0	(HD64461_IRQBASE+14)
-
-#define __IO_PREFIX	hd64461
-#include <asm/io_generic.h>
-
-/* arch/sh/cchips/hd6446x/hd64461/setup.c */
-int hd64461_irq_demux(int irq);
-void hd64461_register_irq_demux(int irq,
-				int (*demux) (int irq, void *dev), void *dev);
-void hd64461_unregister_irq_demux(int irq);
-
-#endif
diff --git a/include/asm-sh/hd64465/gpio.h b/include/asm-sh/hd64465/gpio.h
deleted file mode 100644
index a3cdca2713dd..000000000000
--- a/include/asm-sh/hd64465/gpio.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _ASM_SH_HD64465_GPIO_
-#define _ASM_SH_HD64465_GPIO_ 1
-/*
- * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
- *
- * Hitachi HD64465 companion chip: General Purpose IO pins support.
- * This layer enables other device drivers to configure GPIO
- * pins, get and set their values, and register an interrupt
- * routine for when input pins change in hardware.
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- */
-#include <asm/hd64465.h>
-
-/* Macro to construct a portpin number (used in all
- * subsequent functions) from a port letter and a pin
- * number, e.g. HD64465_GPIO_PORTPIN('A', 5).
- */
-#define HD64465_GPIO_PORTPIN(port,pin)	(((port)-'A')<<3|(pin))
-
-/* Pin configuration constants for _configure() */
-#define HD64465_GPIO_FUNCTION2	0	/* use the pin's *other* function */
-#define HD64465_GPIO_OUT	1	/* output */
-#define HD64465_GPIO_IN_PULLUP	2	/* input, pull-up MOS on */
-#define HD64465_GPIO_IN		3	/* input */
-
-/* Configure a pin's direction */
-extern void hd64465_gpio_configure(int portpin, int direction);
-
-/* Get, set value */
-extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
-extern unsigned int hd64465_gpio_get_pin(int portpin);
-extern void hd64465_gpio_set_port(int port, unsigned int value);
-extern unsigned int hd64465_gpio_get_port(int port);
-
-/* mode constants for _register_irq() */
-#define HD64465_GPIO_FALLING	0
-#define HD64465_GPIO_RISING	1
-
-/* Interrupt on external value change */
-extern void hd64465_gpio_register_irq(int portpin, int mode,
-	void (*handler)(int portpin, void *dev), void *dev);
-extern void hd64465_gpio_unregister_irq(int portpin);
-
-#endif /* _ASM_SH_HD64465_GPIO_  */
diff --git a/include/asm-sh/hd64465/hd64465.h b/include/asm-sh/hd64465/hd64465.h
deleted file mode 100644
index cfd0e803d2a2..000000000000
--- a/include/asm-sh/hd64465/hd64465.h
+++ /dev/null
@@ -1,256 +0,0 @@
-#ifndef _ASM_SH_HD64465_
-#define _ASM_SH_HD64465_ 1
-/*
- * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
- *
- * Hitachi HD64465 companion chip support
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- *
- * Derived from <asm/hd64461.h> which bore the message:
- * Copyright (C) 2000 YAEGASHI Takeshi
- */
-#include <asm/io.h>
-#include <asm/irq.h>
-
-/*
- * Note that registers are defined here as virtual port numbers,
- * which have no meaning except to get translated by hd64465_isa_port2addr()
- * to an address in the range 0xb0000000-0xb3ffffff.  Note that
- * this translation happens to consist of adding the lower 16 bits
- * of the virtual port number to 0xb0000000.  Note also that the manual
- * shows addresses as absolute physical addresses starting at 0x10000000,
- * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
- * manual, and accessed using address 0xb0005000 - Greg.
- */
-
-/* System registers */
-#define HD64465_REG_SRR     0x1000c 	/* System Revision Register */
-#define HD64465_REG_SDID    0x10010 	/* System Device ID Reg */
-#define     HD64465_SDID            0x8122  /* 64465 device ID */
-
-/* Power Management registers */
-#define HD64465_REG_SMSCR   0x10000 	/* System Module Standby Control Reg */
-#define	    HD64465_SMSCR_PS2ST     0x4000  /* PS/2 Standby */
-#define	    HD64465_SMSCR_ADCST     0x1000  /* ADC Standby */
-#define	    HD64465_SMSCR_UARTST    0x0800  /* UART Standby */
-#define	    HD64465_SMSCR_SCDIST    0x0200  /* Serial Codec Standby */
-#define	    HD64465_SMSCR_PPST	    0x0100  /* Parallel Port Standby */
-#define	    HD64465_SMSCR_PC0ST     0x0040  /* PCMCIA0 Standby */
-#define	    HD64465_SMSCR_PC1ST     0x0020  /* PCMCIA1 Standby */
-#define	    HD64465_SMSCR_AFEST     0x0010  /* AFE Standby */
-#define	    HD64465_SMSCR_TM0ST     0x0008  /* Timer0 Standby */
-#define	    HD64465_SMSCR_TM1ST     0x0004  /* Timer1 Standby */
-#define	    HD64465_SMSCR_IRDAST    0x0002  /* IRDA Standby */
-#define	    HD64465_SMSCR_KBCST     0x0001  /* Keyboard Controller Standby */
- 
-/* Interrupt Controller registers */
-#define HD64465_REG_NIRR    0x15000  	/* Interrupt Request Register */
-#define HD64465_REG_NIMR    0x15002  	/* Interrupt Mask Register */
-#define HD64465_REG_NITR    0x15004  	/* Interrupt Trigger Mode Register */
-
-/* Timer registers */
-#define HD64465_REG_TCVR1   0x16000  	/* Timer 1 constant value register  */
-#define HD64465_REG_TCVR0   0x16002	/* Timer 0 constant value register  */
-#define HD64465_REG_TRVR1   0x16004	/* Timer 1 read value register  */
-#define HD64465_REG_TRVR0   0x16006	/* Timer 0 read value register  */
-#define HD64465_REG_TCR1    0x16008	/* Timer 1 control register  */
-#define HD64465_REG_TCR0    0x1600A	/* Timer 0 control register  */
-#define	    HD64465_TCR_EADT 	0x10	    /* Enable ADTRIG# signal */
-#define	    HD64465_TCR_ETMO 	0x08	    /* Enable TMO signal */
-#define	    HD64465_TCR_PST_MASK 0x06	    /* Clock Prescale */
-#define	    HD64465_TCR_PST_1 	0x06	    /* 1:1 */
-#define	    HD64465_TCR_PST_4 	0x04	    /* 1:4 */
-#define	    HD64465_TCR_PST_8 	0x02	    /* 1:8 */
-#define	    HD64465_TCR_PST_16 	0x00	    /* 1:16 */
-#define	    HD64465_TCR_TSTP 	0x01	    /* Start/Stop timer */
-#define HD64465_REG_TIRR    0x1600C	/* Timer interrupt request register  */
-#define HD64465_REG_TIDR    0x1600E	/* Timer interrupt disable register  */
-#define HD64465_REG_PWM1CS  0x16010	/* PWM 1 clock scale register  */
-#define HD64465_REG_PWM1LPC 0x16012	/* PWM 1 low pulse width counter register  */
-#define HD64465_REG_PWM1HPC 0x16014	/* PWM 1 high pulse width counter register  */
-#define HD64465_REG_PWM0CS  0x16018	/* PWM 0 clock scale register  */
-#define HD64465_REG_PWM0LPC 0x1601A	/* PWM 0 low pulse width counter register  */
-#define HD64465_REG_PWM0HPC 0x1601C	/* PWM 0 high pulse width counter register  */
-
-/* Analog/Digital Converter registers */
-#define HD64465_REG_ADDRA   0x1E000	/* A/D data register A */
-#define HD64465_REG_ADDRB   0x1E002	/* A/D data register B */
-#define HD64465_REG_ADDRC   0x1E004	/* A/D data register C */
-#define HD64465_REG_ADDRD   0x1E006	/* A/D data register D */
-#define HD64465_REG_ADCSR   0x1E008	/* A/D control/status register */
-#define     HD64465_ADCSR_ADF	    0x80    /* A/D End Flag */
-#define     HD64465_ADCSR_ADST	    0x40    /* A/D Start Flag */
-#define     HD64465_ADCSR_ADIS	    0x20    /* A/D Interrupt Status */
-#define     HD64465_ADCSR_TRGE	    0x10    /* A/D Trigger Enable */
-#define     HD64465_ADCSR_ADIE	    0x08    /* A/D Interrupt Enable */
-#define     HD64465_ADCSR_SCAN	    0x04    /* A/D Scan Mode */
-#define     HD64465_ADCSR_CH_MASK   0x03    /* A/D Channel */
-#define HD64465_REG_ADCALCR 0x1E00A  	/* A/D calibration sample control */
-#define HD64465_REG_ADCAL   0x1E00C  	/* A/D calibration data register */
-
-
-/* General Purpose I/O ports registers */
-#define HD64465_REG_GPACR   0x14000  	/* Port A Control Register */
-#define HD64465_REG_GPBCR   0x14002  	/* Port B Control Register */
-#define HD64465_REG_GPCCR   0x14004  	/* Port C Control Register */
-#define HD64465_REG_GPDCR   0x14006  	/* Port D Control Register */
-#define HD64465_REG_GPECR   0x14008  	/* Port E Control Register */
-#define HD64465_REG_GPADR   0x14010  	/* Port A Data Register */
-#define HD64465_REG_GPBDR   0x14012  	/* Port B Data Register */
-#define HD64465_REG_GPCDR   0x14014  	/* Port C Data Register */
-#define HD64465_REG_GPDDR   0x14016  	/* Port D Data Register */
-#define HD64465_REG_GPEDR   0x14018  	/* Port E Data Register */
-#define HD64465_REG_GPAICR  0x14020  	/* Port A Interrupt Control Register */
-#define HD64465_REG_GPBICR  0x14022  	/* Port B Interrupt Control Register */
-#define HD64465_REG_GPCICR  0x14024  	/* Port C Interrupt Control Register */
-#define HD64465_REG_GPDICR  0x14026  	/* Port D Interrupt Control Register */
-#define HD64465_REG_GPEICR  0x14028  	/* Port E Interrupt Control Register */
-#define HD64465_REG_GPAISR  0x14040  	/* Port A Interrupt Status Register */
-#define HD64465_REG_GPBISR  0x14042  	/* Port B Interrupt Status Register */
-#define HD64465_REG_GPCISR  0x14044  	/* Port C Interrupt Status Register */
-#define HD64465_REG_GPDISR  0x14046  	/* Port D Interrupt Status Register */
-#define HD64465_REG_GPEISR  0x14048  	/* Port E Interrupt Status Register */
-
-/* PCMCIA bridge interface */
-#define HD64465_REG_PCC0ISR	0x12000	/* socket 0 interface status */ 
-#define     HD64465_PCCISR_PREADY   	 0x80    /* mem card ready / io card IREQ */
-#define     HD64465_PCCISR_PIREQ    	 0x80
-#define     HD64465_PCCISR_PMWP     	 0x40    /* mem card write-protected */
-#define     HD64465_PCCISR_PVS2 	 0x20    /* voltage select pin 2 */
-#define     HD64465_PCCISR_PVS1 	 0x10    /* voltage select pin 1 */
-#define     HD64465_PCCISR_PCD_MASK 	 0x0c    /* card detect */
-#define     HD64465_PCCISR_PBVD_MASK     0x03    /* battery voltage */
-#define     HD64465_PCCISR_PBVD_BATGOOD  0x03    /* battery good */
-#define     HD64465_PCCISR_PBVD_BATWARN  0x01    /* battery low warning */
-#define     HD64465_PCCISR_PBVD_BATDEAD1 0x02    /* battery dead */
-#define     HD64465_PCCISR_PBVD_BATDEAD2 0x00    /* battery dead */
-#define HD64465_REG_PCC0GCR	0x12002	/* socket 0 general control */ 
-#define     HD64465_PCCGCR_PDRV   	 0x80    /* output drive */
-#define     HD64465_PCCGCR_PCCR   	 0x40    /* PC card reset */
-#define     HD64465_PCCGCR_PCCT   	 0x20    /* PC card type, 1=IO&mem, 0=mem */
-#define     HD64465_PCCGCR_PVCC0   	 0x10    /* voltage control pin VCC0SEL0 */
-#define     HD64465_PCCGCR_PMMOD   	 0x08    /* memory mode */
-#define     HD64465_PCCGCR_PPA25   	 0x04    /* pin A25 */
-#define     HD64465_PCCGCR_PPA24   	 0x02    /* pin A24 */
-#define     HD64465_PCCGCR_PREG   	 0x01    /* ping PCC0REG# */
-#define HD64465_REG_PCC0CSCR	0x12004	/* socket 0 card status change */ 
-#define     HD64465_PCCCSCR_PSCDI   	 0x80    /* sw card detect intr */
-#define     HD64465_PCCCSCR_PSWSEL   	 0x40    /* power select */
-#define     HD64465_PCCCSCR_PIREQ   	 0x20    /* IREQ intr req */
-#define     HD64465_PCCCSCR_PSC   	 0x10    /* STSCHG (status change) pin */
-#define     HD64465_PCCCSCR_PCDC   	 0x08    /* CD (card detect) change */
-#define     HD64465_PCCCSCR_PRC   	 0x04    /* ready change */
-#define     HD64465_PCCCSCR_PBW   	 0x02    /* battery warning change */
-#define     HD64465_PCCCSCR_PBD   	 0x01    /* battery dead change */
-#define HD64465_REG_PCC0CSCIER	0x12006	/* socket 0 card status change interrupt enable */ 
-#define     HD64465_PCCCSCIER_PCRE   	 0x80    /* change reset enable */
-#define     HD64465_PCCCSCIER_PIREQE_MASK   	0x60   /* IREQ enable */
-#define     HD64465_PCCCSCIER_PIREQE_DISABLED	0x00   /* IREQ disabled */
-#define     HD64465_PCCCSCIER_PIREQE_LEVEL  	0x20   /* IREQ level-triggered */
-#define     HD64465_PCCCSCIER_PIREQE_FALLING	0x40   /* IREQ falling-edge-trig */
-#define     HD64465_PCCCSCIER_PIREQE_RISING 	0x60   /* IREQ rising-edge-trig */
-#define     HD64465_PCCCSCIER_PSCE   	 0x10    /* status change enable */
-#define     HD64465_PCCCSCIER_PCDE   	 0x08    /* card detect change enable */
-#define     HD64465_PCCCSCIER_PRE   	 0x04    /* ready change enable */
-#define     HD64465_PCCCSCIER_PBWE   	 0x02    /* battery warn change enable */
-#define     HD64465_PCCCSCIER_PBDE   	 0x01    /* battery dead change enable*/
-#define HD64465_REG_PCC0SCR	0x12008	/* socket 0 software control */ 
-#define     HD64465_PCCSCR_SHDN   	 0x10    /* TPS2206 SHutDowN pin */
-#define     HD64465_PCCSCR_SWP   	 0x01    /* write protect */
-#define HD64465_REG_PCCPSR	0x1200A	/* serial power switch control */ 
-#define HD64465_REG_PCC1ISR	0x12010	/* socket 1 interface status */ 
-#define HD64465_REG_PCC1GCR	0x12012	/* socket 1 general control */ 
-#define HD64465_REG_PCC1CSCR	0x12014	/* socket 1 card status change */ 
-#define HD64465_REG_PCC1CSCIER	0x12016	/* socket 1 card status change interrupt enable */ 
-#define HD64465_REG_PCC1SCR	0x12018	/* socket 1 software control */ 
-
-
-/* PS/2 Keyboard and mouse controller -- *not* register compatible */
-#define HD64465_REG_KBCSR   	0x1dc00 /* Keyboard Control/Status reg */
-#define     HD64465_KBCSR_KBCIE   	 0x8000    /* KBCK Input Enable */
-#define     HD64465_KBCSR_KBCOE   	 0x4000    /* KBCK Output Enable */
-#define     HD64465_KBCSR_KBDOE   	 0x2000    /* KB DATA Output Enable */
-#define     HD64465_KBCSR_KBCD   	 0x1000    /* KBCK Driven */
-#define     HD64465_KBCSR_KBDD   	 0x0800    /* KB DATA Driven */
-#define     HD64465_KBCSR_KBCS   	 0x0400    /* KBCK pin Status */
-#define     HD64465_KBCSR_KBDS   	 0x0200    /* KB DATA pin Status */
-#define     HD64465_KBCSR_KBDP   	 0x0100    /* KB DATA Parity bit */
-#define     HD64465_KBCSR_KBD_MASK   	 0x00ff    /* KD DATA shift reg */
-#define HD64465_REG_KBISR   	0x1dc04 /* Keyboard Interrupt Status reg */
-#define     HD64465_KBISR_KBRDF   	 0x0001    /* KB Received Data Full */
-#define HD64465_REG_MSCSR   	0x1dc10 /* Mouse Control/Status reg */
-#define HD64465_REG_MSISR   	0x1dc14 /* Mouse Interrupt Status reg */
-
-
-/*
- * Logical address at which the HD64465 is mapped.  Note that this
- * should always be in the P2 segment (uncached and untranslated).
- */
-#ifndef CONFIG_HD64465_IOBASE
-#define CONFIG_HD64465_IOBASE	0xb0000000
-#endif
-/*
- * The HD64465 multiplexes all its modules' interrupts onto
- * this single interrupt.
- */
-#ifndef CONFIG_HD64465_IRQ
-#define CONFIG_HD64465_IRQ	5
-#endif
-
-
-#define _HD64465_IO_MASK	0xf8000000
-#define is_hd64465_addr(addr) \
-	((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))
-
-/*
- * A range of 16 virtual interrupts generated by
- * demuxing the HD64465 muxed interrupt.
- */
-#define HD64465_IRQ_BASE	OFFCHIP_IRQ_BASE
-#define HD64465_IRQ_NUM 	16
-#define HD64465_IRQ_ADC     	(HD64465_IRQ_BASE+0)
-#define HD64465_IRQ_USB     	(HD64465_IRQ_BASE+1)
-#define HD64465_IRQ_SCDI    	(HD64465_IRQ_BASE+2)
-#define HD64465_IRQ_PARALLEL	(HD64465_IRQ_BASE+3)
-/* bit 4 is reserved */
-#define HD64465_IRQ_UART    	(HD64465_IRQ_BASE+5)
-#define HD64465_IRQ_IRDA    	(HD64465_IRQ_BASE+6)
-#define HD64465_IRQ_PS2MOUSE	(HD64465_IRQ_BASE+7)
-#define HD64465_IRQ_KBC     	(HD64465_IRQ_BASE+8)
-#define HD64465_IRQ_TIMER1   	(HD64465_IRQ_BASE+9)
-#define HD64465_IRQ_TIMER0  	(HD64465_IRQ_BASE+10)
-#define HD64465_IRQ_GPIO    	(HD64465_IRQ_BASE+11)
-#define HD64465_IRQ_AFE     	(HD64465_IRQ_BASE+12)
-#define HD64465_IRQ_PCMCIA1 	(HD64465_IRQ_BASE+13)
-#define HD64465_IRQ_PCMCIA0 	(HD64465_IRQ_BASE+14)
-#define HD64465_IRQ_PS2KBD     	(HD64465_IRQ_BASE+15)
-
-/* Constants for PCMCIA mappings */
-#define HD64465_PCC_WINDOW	0x01000000
-
-#define HD64465_PCC0_BASE	0xb8000000	/* area 6 */
-#define HD64465_PCC0_ATTR	(HD64465_PCC0_BASE)
-#define HD64465_PCC0_COMM	(HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
-#define HD64465_PCC0_IO		(HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)
-
-#define HD64465_PCC1_BASE	0xb4000000	/* area 5 */
-#define HD64465_PCC1_ATTR	(HD64465_PCC1_BASE)
-#define HD64465_PCC1_COMM	(HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
-#define HD64465_PCC1_IO		(HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)
-
-/*
- * Base of USB controller interface (as memory)
- */
-#define HD64465_USB_BASE    	(CONFIG_HD64465_IOBASE+0xb000)
-#define HD64465_USB_LEN    	0x1000
-/*
- * Base of embedded SRAM, used for USB controller.
- */
-#define HD64465_SRAM_BASE    	(CONFIG_HD64465_IOBASE+0x9000)
-#define HD64465_SRAM_LEN    	0x1000
-
-
-
-#endif /* _ASM_SH_HD64465_  */
diff --git a/include/asm-sh/hd64465/io.h b/include/asm-sh/hd64465/io.h
deleted file mode 100644
index 139f1472e5bb..000000000000
--- a/include/asm-sh/hd64465/io.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-sh/hd64465/io.h
- *
- * By Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- *
- * Derived from io_hd64461.h, which bore the message:
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
- */
-
-#ifndef _ASM_SH_IO_HD64465_H
-#define _ASM_SH_IO_HD64465_H
-
-extern unsigned char hd64465_inb(unsigned long port);
-extern unsigned short hd64465_inw(unsigned long port);
-extern unsigned int hd64465_inl(unsigned long port);
-
-extern void hd64465_outb(unsigned char value, unsigned long port);
-extern void hd64465_outw(unsigned short value, unsigned long port);
-extern void hd64465_outl(unsigned int value, unsigned long port);
-
-extern unsigned char hd64465_inb_p(unsigned long port);
-extern void hd64465_outb_p(unsigned char value, unsigned long port);
-
-extern unsigned long hd64465_isa_port2addr(unsigned long offset);
-extern int hd64465_irq_demux(int irq);
-/* Provision for generic secondary demux step -- used by PCMCIA code */
-extern void hd64465_register_irq_demux(int irq,
-		int (*demux)(int irq, void *dev), void *dev);
-extern void hd64465_unregister_irq_demux(int irq);
-/* Set this variable to 1 to see port traffic */
-extern int hd64465_io_debug;
-/* Map a range of ports to a range of kernel virtual memory.
- */
-extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
-			     unsigned long addr, unsigned char shift);
-extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
-
-#endif /* _ASM_SH_IO_HD64465_H */
diff --git a/include/asm-sh/heartbeat.h b/include/asm-sh/heartbeat.h
deleted file mode 100644
index 724a43ed245e..000000000000
--- a/include/asm-sh/heartbeat.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_SH_HEARTBEAT_H
-#define __ASM_SH_HEARTBEAT_H
-
-#include <linux/timer.h>
-
-#define HEARTBEAT_INVERTED	(1 << 0)
-
-struct heartbeat_data {
-	void __iomem *base;
-	unsigned char *bit_pos;
-	unsigned int nr_bits;
-	struct timer_list timer;
-	unsigned int regsize;
-	unsigned long flags;
-};
-
-#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/include/asm-sh/hp6xx.h b/include/asm-sh/hp6xx.h
deleted file mode 100644
index 0d4165a32dcd..000000000000
--- a/include/asm-sh/hp6xx.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __ASM_SH_HP6XX_H
-#define __ASM_SH_HP6XX_H
-
-/*
- * Copyright (C) 2003, 2004, 2005  Andriy Skulysh
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#define HP680_BTN_IRQ		32	/* IRQ0_IRQ */
-#define HP680_TS_IRQ		35	/* IRQ3_IRQ */
-#define HP680_HD64461_IRQ	36	/* IRQ4_IRQ */
-
-#define DAC_LCD_BRIGHTNESS	0
-#define DAC_SPEAKER_VOLUME	1
-
-#define PGDR_OPENED		0x01
-#define PGDR_MAIN_BATTERY_OUT	0x04
-#define PGDR_PLAY_BUTTON	0x08
-#define PGDR_REWIND_BUTTON	0x10
-#define PGDR_RECORD_BUTTON	0x20
-
-#define PHDR_TS_PEN_DOWN	0x08
-
-#define PJDR_LED_BLINK		0x02
-
-#define PKDR_LED_GREEN		0x10
-
-#define SCPDR_TS_SCAN_ENABLE	0x20
-#define SCPDR_TS_SCAN_Y		0x02
-#define SCPDR_TS_SCAN_X		0x01
-
-#define SCPCR_TS_ENABLE		0x405
-#define SCPCR_TS_MASK		0xc0f
-
-#define ADC_CHANNEL_TS_Y	1
-#define ADC_CHANNEL_TS_X	2
-#define ADC_CHANNEL_BATTERY	3
-#define ADC_CHANNEL_BACKUP	4
-#define ADC_CHANNEL_CHARGE	5
-
-#define HD64461_GPADR_SPEAKER	0x01
-#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
-
-#define HD64461_GPBDR_LCDOFF	0x01
-#define HD64461_GPBDR_LCD_CONTRAST_MASK	0x78
-#define HD64461_GPBDR_LED_RED	0x80
-
-#include <asm/hd64461.h>
-#include <asm/io.h>
-
-#define PJDR	0xa4000130
-#define PKDR	0xa4000132
-
-#endif /* __ASM_SH_HP6XX_H */
diff --git a/include/asm-sh/hugetlb.h b/include/asm-sh/hugetlb.h
deleted file mode 100644
index 02402303d89b..000000000000
--- a/include/asm-sh/hugetlb.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef _ASM_SH_HUGETLB_H
-#define _ASM_SH_HUGETLB_H
-
-#include <asm/page.h>
-
-
-static inline int is_hugepage_only_range(struct mm_struct *mm,
-					 unsigned long addr,
-					 unsigned long len) {
-	return 0;
-}
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
-{
-	if (len & ~HPAGE_MASK)
-		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
-		return -EINVAL;
-	return 0;
-}
-
-static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
-}
-
-static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
-					  unsigned long addr, unsigned long end,
-					  unsigned long floor,
-					  unsigned long ceiling)
-{
-	free_pgd_range(tlb, addr, end, floor, ceiling);
-}
-
-static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-				   pte_t *ptep, pte_t pte)
-{
-	set_pte_at(mm, addr, ptep, pte);
-}
-
-static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
-{
-	return ptep_get_and_clear(mm, addr, ptep);
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long addr, pte_t *ptep)
-{
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
-	return pte_none(pte);
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
-	return pte_wrprotect(pte);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	ptep_set_wrprotect(mm, addr, ptep);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
-					     unsigned long addr, pte_t *ptep,
-					     pte_t pte, int dirty)
-{
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
-	return *ptep;
-}
-
-static inline int arch_prepare_hugepage(struct page *page)
-{
-	return 0;
-}
-
-static inline void arch_release_hugepage(struct page *page)
-{
-}
-
-#endif /* _ASM_SH_HUGETLB_H */
diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
deleted file mode 100644
index 7438d1e21bc9..000000000000
--- a/include/asm-sh/hw_irq.h
+++ /dev/null
@@ -1,123 +0,0 @@
-#ifndef __ASM_SH_HW_IRQ_H
-#define __ASM_SH_HW_IRQ_H
-
-#include <linux/init.h>
-#include <asm/atomic.h>
-
-extern atomic_t irq_err_count;
-
-struct ipr_data {
-	unsigned char irq;
-	unsigned char ipr_idx;		/* Index for the IPR registered */
-	unsigned char shift;		/* Number of bits to shift the data */
-	unsigned char priority;		/* The priority */
-};
-
-struct ipr_desc {
-	unsigned long *ipr_offsets;
-	unsigned int nr_offsets;
-	struct ipr_data *ipr_data;
-	unsigned int nr_irqs;
-	struct irq_chip chip;
-};
-
-void register_ipr_controller(struct ipr_desc *);
-
-typedef unsigned char intc_enum;
-
-struct intc_vect {
-	intc_enum enum_id;
-	unsigned short vect;
-};
-
-#define INTC_VECT(enum_id, vect) { enum_id, vect }
-#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
-
-struct intc_group {
-	intc_enum enum_id;
-	intc_enum enum_ids[32];
-};
-
-#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
-
-struct intc_mask_reg {
-	unsigned long set_reg, clr_reg, reg_width;
-	intc_enum enum_ids[32];
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_prio_reg {
-	unsigned long set_reg, clr_reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_sense_reg {
-	unsigned long reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-};
-
-#ifdef CONFIG_SMP
-#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
-#else
-#define INTC_SMP(stride, nr)
-#endif
-
-struct intc_desc {
-	struct intc_vect *vectors;
-	unsigned int nr_vectors;
-	struct intc_group *groups;
-	unsigned int nr_groups;
-	struct intc_mask_reg *mask_regs;
-	unsigned int nr_mask_regs;
-	struct intc_prio_reg *prio_regs;
-	unsigned int nr_prio_regs;
-	struct intc_sense_reg *sense_regs;
-	unsigned int nr_sense_regs;
-	char *name;
-#ifdef CONFIG_CPU_SH3
-	struct intc_mask_reg *ack_regs;
-	unsigned int nr_ack_regs;
-#endif
-};
-
-#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
-#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
-	mask_regs, prio_regs, sense_regs)				\
-struct intc_desc symbol __initdata = {					\
-	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
-	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
-	_INTC_ARRAY(sense_regs),					\
-	chipname,							\
-}
-
-#ifdef CONFIG_CPU_SH3
-#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
-	mask_regs, prio_regs, sense_regs, ack_regs)			\
-struct intc_desc symbol __initdata = {					\
-	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
-	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
-	_INTC_ARRAY(sense_regs),					\
-	chipname,							\
-	_INTC_ARRAY(ack_regs),						\
-}
-#endif
-
-void __init register_intc_controller(struct intc_desc *desc);
-int intc_set_priority(unsigned int irq, unsigned int prio);
-
-void __init plat_irq_setup(void);
-#ifdef CONFIG_CPU_SH3
-void __init plat_irq_setup_sh3(void);
-#endif
-
-enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
-       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
-       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
-void __init plat_irq_setup_pins(int mode);
-
-#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/i2c-sh7760.h b/include/asm-sh/i2c-sh7760.h
deleted file mode 100644
index 24182116711f..000000000000
--- a/include/asm-sh/i2c-sh7760.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * MMIO/IRQ and platform data for SH7760 I2C channels
- */
-
-#ifndef _I2C_SH7760_H_
-#define _I2C_SH7760_H_
-
-#define SH7760_I2C_DEVNAME	"sh7760-i2c"
-
-#define SH7760_I2C0_MMIO	0xFE140000
-#define SH7760_I2C0_MMIOEND	0xFE14003B
-#define SH7760_I2C0_IRQ		62
-
-#define SH7760_I2C1_MMIO	0xFE150000
-#define SH7760_I2C1_MMIOEND	0xFE15003B
-#define SH7760_I2C1_IRQ		63
-
-struct sh7760_i2c_platdata {
-	unsigned int speed_khz;
-};
-
-#endif
diff --git a/include/asm-sh/ide.h b/include/asm-sh/ide.h
deleted file mode 100644
index 58e0bdd52be4..000000000000
--- a/include/asm-sh/ide.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  linux/include/asm-sh/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the i386 architecture specific IDE code.
- *  In future, SuperH code.
- */
-
-#ifndef __ASM_SH_IDE_H
-#define __ASM_SH_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_IDE_H */
diff --git a/include/asm-sh/ilsel.h b/include/asm-sh/ilsel.h
deleted file mode 100644
index e3d304b280f6..000000000000
--- a/include/asm-sh/ilsel.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_SH_ILSEL_H
-#define __ASM_SH_ILSEL_H
-
-typedef enum {
-	ILSEL_NONE,
-	ILSEL_LAN,
-	ILSEL_USBH_I,
-	ILSEL_USBH_S,
-	ILSEL_USBH_V,
-	ILSEL_RTC,
-	ILSEL_USBP_I,
-	ILSEL_USBP_S,
-	ILSEL_USBP_V,
-	ILSEL_KEY,
-
-	/*
-	 * ILSEL Aliases - corner cases for interleaved level tables.
-	 *
-	 * Someone thought this was a good idea and less hassle than
-	 * demuxing a shared vector, really.
-	 */
-
-	/* ILSEL0 and 2 */
-	ILSEL_FPGA0,
-	ILSEL_FPGA1,
-	ILSEL_EX1,
-	ILSEL_EX2,
-	ILSEL_EX3,
-	ILSEL_EX4,
-
-	/* ILSEL1 and 3 */
-	ILSEL_FPGA2 = ILSEL_FPGA0,
-	ILSEL_FPGA3 = ILSEL_FPGA1,
-	ILSEL_EX5 = ILSEL_EX1,
-	ILSEL_EX6 = ILSEL_EX2,
-	ILSEL_EX7 = ILSEL_EX3,
-	ILSEL_EX8 = ILSEL_EX4,
-} ilsel_source_t;
-
-/* arch/sh/boards/renesas/x3proto/ilsel.c */
-int ilsel_enable(ilsel_source_t set);
-int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
-void ilsel_disable(unsigned int irq);
-
-#endif /* __ASM_SH_ILSEL_H */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
deleted file mode 100644
index a4fbf0c84fb1..000000000000
--- a/include/asm-sh/io.h
+++ /dev/null
@@ -1,366 +0,0 @@
-#ifndef __ASM_SH_IO_H
-#define __ASM_SH_IO_H
-
-/*
- * Convention:
- *    read{b,w,l}/write{b,w,l} are for PCI,
- *    while in{b,w,l}/out{b,w,l} are for ISA
- * These may (will) be platform specific function.
- * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
- * and 'string' versions: ins{b,w,l}/outs{b,w,l}
- * For read{b,w,l} and write{b,w,l} there are also __raw versions, which
- * do not have a memory barrier after them.
- *
- * In addition, we have
- *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
- *   which are processor specific.
- */
-
-/*
- * We follow the Alpha convention here:
- *  __inb expands to an inline function call (which calls via the mv)
- *  _inb  is a real function call (note ___raw fns are _ version of __raw)
- *  inb   by default expands to _inb, but the machine specific code may
- *        define it to __inb if it chooses.
- */
-#include <asm/cache.h>
-#include <asm/system.h>
-#include <asm/addrspace.h>
-#include <asm/machvec.h>
-#include <asm/pgtable.h>
-#include <asm-generic/iomap.h>
-
-#ifdef __KERNEL__
-
-/*
- * Depending on which platform we are running on, we need different
- * I/O functions.
- */
-#define __IO_PREFIX	generic
-#include <asm/io_generic.h>
-#include <asm/io_trapped.h>
-
-#define maybebadio(port) \
-  printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
-	 __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0))
-
-/*
- * Since boards are able to define their own set of I/O routines through
- * their respective machine vector, we always wrap through the mv.
- *
- * Also, in the event that a board hasn't provided its own definition for
- * a given routine, it will be wrapped to generic code at run-time.
- */
-
-#define __inb(p)	sh_mv.mv_inb((p))
-#define __inw(p)	sh_mv.mv_inw((p))
-#define __inl(p)	sh_mv.mv_inl((p))
-#define __outb(x,p)	sh_mv.mv_outb((x),(p))
-#define __outw(x,p)	sh_mv.mv_outw((x),(p))
-#define __outl(x,p)	sh_mv.mv_outl((x),(p))
-
-#define __inb_p(p)	sh_mv.mv_inb_p((p))
-#define __inw_p(p)	sh_mv.mv_inw_p((p))
-#define __inl_p(p)	sh_mv.mv_inl_p((p))
-#define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))
-#define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))
-#define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))
-
-#define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))
-#define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))
-#define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))
-#define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))
-#define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))
-#define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))
-
-#define __readb(a)	sh_mv.mv_readb((a))
-#define __readw(a)	sh_mv.mv_readw((a))
-#define __readl(a)	sh_mv.mv_readl((a))
-#define __writeb(v,a)	sh_mv.mv_writeb((v),(a))
-#define __writew(v,a)	sh_mv.mv_writew((v),(a))
-#define __writel(v,a)	sh_mv.mv_writel((v),(a))
-
-#define inb		__inb
-#define inw		__inw
-#define inl		__inl
-#define outb		__outb
-#define outw		__outw
-#define outl		__outl
-
-#define inb_p		__inb_p
-#define inw_p		__inw_p
-#define inl_p		__inl_p
-#define outb_p		__outb_p
-#define outw_p		__outw_p
-#define outl_p		__outl_p
-
-#define insb		__insb
-#define insw		__insw
-#define insl		__insl
-#define outsb		__outsb
-#define outsw		__outsw
-#define outsl		__outsl
-
-#define __raw_readb(a)		__readb((void __iomem *)(a))
-#define __raw_readw(a)		__readw((void __iomem *)(a))
-#define __raw_readl(a)		__readl((void __iomem *)(a))
-#define __raw_writeb(v, a)	__writeb(v, (void __iomem *)(a))
-#define __raw_writew(v, a)	__writew(v, (void __iomem *)(a))
-#define __raw_writel(v, a)	__writel(v, (void __iomem *)(a))
-
-void __raw_writesl(unsigned long addr, const void *data, int longlen);
-void __raw_readsl(unsigned long addr, void *data, int longlen);
-
-/*
- * The platform header files may define some of these macros to use
- * the inlined versions where appropriate.  These macros may also be
- * redefined by userlevel programs.
- */
-#ifdef __readb
-# define readb(a)	({ unsigned int r_ = __raw_readb(a); mb(); r_; })
-#endif
-#ifdef __raw_readw
-# define readw(a)	({ unsigned int r_ = __raw_readw(a); mb(); r_; })
-#endif
-#ifdef __raw_readl
-# define readl(a)	({ unsigned int r_ = __raw_readl(a); mb(); r_; })
-#endif
-
-#ifdef __raw_writeb
-# define writeb(v,a)	({ __raw_writeb((v),(a)); mb(); })
-#endif
-#ifdef __raw_writew
-# define writew(v,a)	({ __raw_writew((v),(a)); mb(); })
-#endif
-#ifdef __raw_writel
-# define writel(v,a)	({ __raw_writel((v),(a)); mb(); })
-#endif
-
-#define __BUILD_MEMORY_STRING(bwlq, type)				\
-									\
-static inline void writes##bwlq(volatile void __iomem *mem,		\
-				const void *addr, unsigned int count)	\
-{									\
-	const volatile type *__addr = addr;				\
-									\
-	while (count--) {						\
-		__raw_write##bwlq(*__addr, mem);			\
-		__addr++;						\
-	}								\
-}									\
-									\
-static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
-			       unsigned int count)			\
-{									\
-	volatile type *__addr = addr;					\
-									\
-	while (count--) {						\
-		*__addr = __raw_read##bwlq(mem);			\
-		__addr++;						\
-	}								\
-}
-
-__BUILD_MEMORY_STRING(b, u8)
-__BUILD_MEMORY_STRING(w, u16)
-#define writesl __raw_writesl
-#define readsl  __raw_readsl
-
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
-
-/* Simple MMIO */
-#define ioread8(a)		readb(a)
-#define ioread16(a)		readw(a)
-#define ioread16be(a)		be16_to_cpu(__raw_readw((a)))
-#define ioread32(a)		readl(a)
-#define ioread32be(a)		be32_to_cpu(__raw_readl((a)))
-
-#define iowrite8(v,a)		writeb((v),(a))
-#define iowrite16(v,a)		writew((v),(a))
-#define iowrite16be(v,a)	__raw_writew(cpu_to_be16((v)),(a))
-#define iowrite32(v,a)		writel((v),(a))
-#define iowrite32be(v,a)	__raw_writel(cpu_to_be32((v)),(a))
-
-#define ioread8_rep(a, d, c)	readsb((a), (d), (c))
-#define ioread16_rep(a, d, c)	readsw((a), (d), (c))
-#define ioread32_rep(a, d, c)	readsl((a), (d), (c))
-
-#define iowrite8_rep(a, s, c)	writesb((a), (s), (c))
-#define iowrite16_rep(a, s, c)	writesw((a), (s), (c))
-#define iowrite32_rep(a, s, c)	writesl((a), (s), (c))
-
-#define mmiowb()	wmb()	/* synco on SH-4A, otherwise a nop */
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * This function provides a method for the generic case where a board-specific
- * ioport_map simply needs to return the port + some arbitrary port base.
- *
- * We use this at board setup time to implicitly set the port base, and
- * as a result, we can use the generic ioport_map.
- */
-static inline void __set_io_port_base(unsigned long pbase)
-{
-	extern unsigned long generic_io_base;
-
-	generic_io_base = pbase;
-}
-
-#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
-
-/* We really want to try and get these to memcpy etc */
-extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long);
-extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
-extern void memset_io(volatile void __iomem *, int, unsigned long);
-
-/* SuperH on-chip I/O functions */
-static inline unsigned char ctrl_inb(unsigned long addr)
-{
-	return *(volatile unsigned char*)addr;
-}
-
-static inline unsigned short ctrl_inw(unsigned long addr)
-{
-	return *(volatile unsigned short*)addr;
-}
-
-static inline unsigned int ctrl_inl(unsigned long addr)
-{
-	return *(volatile unsigned long*)addr;
-}
-
-static inline unsigned long long ctrl_inq(unsigned long addr)
-{
-	return *(volatile unsigned long long*)addr;
-}
-
-static inline void ctrl_outb(unsigned char b, unsigned long addr)
-{
-	*(volatile unsigned char*)addr = b;
-}
-
-static inline void ctrl_outw(unsigned short b, unsigned long addr)
-{
-	*(volatile unsigned short*)addr = b;
-}
-
-static inline void ctrl_outl(unsigned int b, unsigned long addr)
-{
-        *(volatile unsigned long*)addr = b;
-}
-
-static inline void ctrl_outq(unsigned long long b, unsigned long addr)
-{
-	*(volatile unsigned long long*)addr = b;
-}
-
-static inline void ctrl_delay(void)
-{
-#ifdef P2SEG
-	ctrl_inw(P2SEG);
-#endif
-}
-
-/* Quad-word real-mode I/O, don't ask.. */
-unsigned long long peek_real_address_q(unsigned long long addr);
-unsigned long long poke_real_address_q(unsigned long long addr,
-				       unsigned long long val);
-
-#if !defined(CONFIG_MMU)
-#define virt_to_phys(address)	((unsigned long)(address))
-#define phys_to_virt(address)	((void *)(address))
-#else
-#define virt_to_phys(address)	(__pa(address))
-#define phys_to_virt(address)	(__va(address))
-#endif
-
-/*
- * On 32-bit SH, we traditionally have the whole physical address space
- * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
- * not need to do anything but place the address in the proper segment.
- * This is true for P1 and P2 addresses, as well as some P3 ones.
- * However, most of the P3 addresses and newer cores using extended
- * addressing need to map through page tables, so the ioremap()
- * implementation becomes a bit more complicated.
- *
- * See arch/sh/mm/ioremap.c for additional notes on this.
- *
- * We cheat a bit and always return uncachable areas until we've fixed
- * the drivers to handle caching properly.
- *
- * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
- * doesn't exist, so everything must go through page tables.
- */
-#ifdef CONFIG_MMU
-void __iomem *__ioremap(unsigned long offset, unsigned long size,
-			unsigned long flags);
-void __iounmap(void __iomem *addr);
-
-/* arch/sh/mm/ioremap_64.c */
-unsigned long onchip_remap(unsigned long addr, unsigned long size,
-			   const char *name);
-extern void onchip_unmap(unsigned long vaddr);
-#else
-#define __ioremap(offset, size, flags)	((void __iomem *)(offset))
-#define __iounmap(addr)			do { } while (0)
-#define onchip_remap(addr, size, name)	(addr)
-#define onchip_unmap(addr)		do { } while (0)
-#endif /* CONFIG_MMU */
-
-static inline void __iomem *
-__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
-{
-#ifdef CONFIG_SUPERH32
-	unsigned long last_addr = offset + size - 1;
-#endif
-	void __iomem *ret;
-
-	ret = __ioremap_trapped(offset, size);
-	if (ret)
-		return ret;
-
-#ifdef CONFIG_SUPERH32
-	/*
-	 * For P1 and P2 space this is trivial, as everything is already
-	 * mapped. Uncached access for P1 addresses are done through P2.
-	 * In the P3 case or for addresses outside of the 29-bit space,
-	 * mapping must be done by the PMB or by using page tables.
-	 */
-	if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
-		if (unlikely(flags & _PAGE_CACHABLE))
-			return (void __iomem *)P1SEGADDR(offset);
-
-		return (void __iomem *)P2SEGADDR(offset);
-	}
-#endif
-
-	return __ioremap(offset, size, flags);
-}
-
-#define ioremap(offset, size)				\
-	__ioremap_mode((offset), (size), 0)
-#define ioremap_nocache(offset, size)			\
-	__ioremap_mode((offset), (size), 0)
-#define ioremap_cache(offset, size)			\
-	__ioremap_mode((offset), (size), _PAGE_CACHABLE)
-#define p3_ioremap(offset, size, flags)			\
-	__ioremap((offset), (size), (flags))
-#define iounmap(addr)					\
-	__iounmap((addr))
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_IO_H */
diff --git a/include/asm-sh/io_generic.h b/include/asm-sh/io_generic.h
deleted file mode 100644
index 92fc6070d7b3..000000000000
--- a/include/asm-sh/io_generic.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Trivial I/O routine definitions, intentionally meant to be included
- * multiple times. Ugly I/O routine concatenation helpers taken from
- * alpha. Must be included _before_ io.h to avoid preprocessor-induced
- * routine mismatch.
- */
-#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)
-#define _IO_CONCAT(a,b)	a ## _ ## b
-
-#ifndef __IO_PREFIX
-#error "Don't include this header without a valid system prefix"
-#endif
-
-u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long);
-u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long);
-u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long);
-
-void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long);
-
-u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long);
-u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long);
-u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long);
-void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long);
-
-void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
-
-u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *);
-u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *);
-u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *);
-void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *);
-
-void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
-void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
-
-void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
-void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
-
-#undef __IO_PREFIX
diff --git a/include/asm-sh/io_trapped.h b/include/asm-sh/io_trapped.h
deleted file mode 100644
index f1251d4f0ba9..000000000000
--- a/include/asm-sh/io_trapped.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __ASM_SH_IO_TRAPPED_H
-#define __ASM_SH_IO_TRAPPED_H
-
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <asm/page.h>
-
-#define IO_TRAPPED_MAGIC 0xfeedbeef
-
-struct trapped_io {
-	unsigned int magic;
-	struct resource *resource;
-	unsigned int num_resources;
-	unsigned int minimum_bus_width;
-	struct list_head list;
-	void __iomem *virt_base;
-} __aligned(PAGE_SIZE);
-
-#ifdef CONFIG_IO_TRAPPED
-int register_trapped_io(struct trapped_io *tiop);
-int handle_trapped_io(struct pt_regs *regs, unsigned long address);
-
-void __iomem *match_trapped_io_handler(struct list_head *list,
-				       unsigned long offset,
-				       unsigned long size);
-
-#ifdef CONFIG_HAS_IOMEM
-extern struct list_head trapped_mem;
-
-static inline void __iomem *
-__ioremap_trapped(unsigned long offset, unsigned long size)
-{
-	return match_trapped_io_handler(&trapped_mem, offset, size);
-}
-#else
-#define __ioremap_trapped(offset, size) NULL
-#endif
-
-#ifdef CONFIG_HAS_IOPORT
-extern struct list_head trapped_io;
-
-static inline void __iomem *
-__ioport_map_trapped(unsigned long offset, unsigned long size)
-{
-	return match_trapped_io_handler(&trapped_io, offset, size);
-}
-#else
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#else
-#define register_trapped_io(tiop) (-1)
-#define handle_trapped_io(tiop, address) 0
-#define __ioremap_trapped(offset, size) NULL
-#define __ioport_map_trapped(offset, size) NULL
-#endif
-
-#endif /* __ASM_SH_IO_TRAPPED_H */
diff --git a/include/asm-sh/ioctl.h b/include/asm-sh/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-sh/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-sh/ioctls.h b/include/asm-sh/ioctls.h
deleted file mode 100644
index c212c371a4a5..000000000000
--- a/include/asm-sh/ioctls.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef __ASM_SH_IOCTLS_H
-#define __ASM_SH_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-#define FIOCLEX		_IO('f', 1)
-#define FIONCLEX	_IO('f', 2)
-#define FIOASYNC	_IOW('f', 125, int)
-#define FIONBIO		_IOW('f', 126, int)
-#define FIONREAD	_IOR('f', 127, int)
-#define TIOCINQ		FIONREAD
-#define FIOQSIZE	_IOR('f', 128, loff_t)
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-
-#define TCGETA		0x80127417	/* _IOR('t', 23, struct termio) */
-#define TCSETA		0x40127418	/* _IOW('t', 24, struct termio) */
-#define TCSETAW		0x40127419	/* _IOW('t', 25, struct termio) */
-#define TCSETAF		0x4012741C	/* _IOW('t', 28, struct termio) */
-
-#define TCSBRK		_IO('t', 29)
-#define TCXONC		_IO('t', 30)
-#define TCFLSH		_IO('t', 31)
-
-#define TIOCSWINSZ	0x40087467	/* _IOW('t', 103, struct winsize) */
-#define TIOCGWINSZ	0x80087468	/* _IOR('t', 104, struct winsize) */
-#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
-#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
-#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
-
-#define TIOCSPGRP	_IOW('t', 118, int)
-#define TIOCGPGRP	_IOR('t', 119, int)
-
-#define TIOCEXCL	_IO('T', 12) /* 0x540C */
-#define TIOCNXCL	_IO('T', 13) /* 0x540D */
-#define TIOCSCTTY	_IO('T', 14) /* 0x540E */
-
-#define TIOCSTI		_IOW('T', 18, char) /* 0x5412 */
-#define TIOCMGET	_IOR('T', 21, unsigned int) /* 0x5415 */
-#define TIOCMBIS	_IOW('T', 22, unsigned int) /* 0x5416 */
-#define TIOCMBIC	_IOW('T', 23, unsigned int) /* 0x5417 */
-#define TIOCMSET	_IOW('T', 24, unsigned int) /* 0x5418 */
-# define TIOCM_LE	0x001
-# define TIOCM_DTR	0x002
-# define TIOCM_RTS	0x004
-# define TIOCM_ST	0x008
-# define TIOCM_SR	0x010
-# define TIOCM_CTS	0x020
-# define TIOCM_CAR	0x040
-# define TIOCM_RNG	0x080
-# define TIOCM_DSR	0x100
-# define TIOCM_CD	TIOCM_CAR
-# define TIOCM_RI	TIOCM_RNG
-
-#define TIOCGSOFTCAR	_IOR('T', 25, unsigned int) /* 0x5419 */
-#define TIOCSSOFTCAR	_IOW('T', 26, unsigned int) /* 0x541A */
-#define TIOCLINUX	_IOW('T', 28, char) /* 0x541C */
-#define TIOCCONS	_IO('T', 29) /* 0x541D */
-#define TIOCGSERIAL	0x803C541E	/* _IOR('T', 30, struct serial_struct) 0x541E */
-#define TIOCSSERIAL	0x403C541F	/* _IOW('T', 31, struct serial_struct) 0x541F */
-#define TIOCPKT		_IOW('T', 32, int) /* 0x5420 */
-# define TIOCPKT_DATA		 0
-# define TIOCPKT_FLUSHREAD	 1
-# define TIOCPKT_FLUSHWRITE	 2
-# define TIOCPKT_STOP		 4
-# define TIOCPKT_START		 8
-# define TIOCPKT_NOSTOP		16
-# define TIOCPKT_DOSTOP		32
-
-
-#define TIOCNOTTY	_IO('T', 34) /* 0x5422 */
-#define TIOCSETD	_IOW('T', 35, int) /* 0x5423 */
-#define TIOCGETD	_IOR('T', 36, int) /* 0x5424 */
-#define TCSBRKP		_IOW('T', 37, int) /* 0x5425 */	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	_IO('T', 39) /* 0x5427 */ /* BSD compatibility */
-#define TIOCCBRK	_IO('T', 40) /* 0x5428 */ /* BSD compatibility */
-#define TIOCGSID	_IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
-#define TCGETS2		_IOR('T', 42, struct termios2)
-#define TCSETS2		_IOW('T', 43, struct termios2)
-#define TCSETSW2	_IOW('T', 44, struct termios2)
-#define TCSETSF2	_IOW('T', 45, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
-#define TIOCSERGWILD	_IOR('T', 84,  int) /* 0x5454 */
-#define TIOCSERSWILD	_IOW('T', 85,  int) /* 0x5455 */
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x80d85458	/* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
-#define TIOCSERGETLSR   _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
-  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-#define TIOCSERGETMULTI 0x80A8545A	/* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */
-#define TIOCSERSETMULTI 0x40A8545B	/* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
-
-#define TIOCMIWAIT	_IO('T', 92) /* 0x545C */	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-
-#endif /* __ASM_SH_IOCTLS_H */
diff --git a/include/asm-sh/ipcbuf.h b/include/asm-sh/ipcbuf.h
deleted file mode 100644
index 5ffc9972a7ea..000000000000
--- a/include/asm-sh/ipcbuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_SH_IPCBUF_H__
-#define __ASM_SH_IPCBUF_H__
-
-/*
- * The ipc64_perm structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __ASM_SH_IPCBUF_H__ */
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
deleted file mode 100644
index ca66e5df69dc..000000000000
--- a/include/asm-sh/irq.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __ASM_SH_IRQ_H
-#define __ASM_SH_IRQ_H
-
-#include <asm/machvec.h>
-
-/*
- * A sane default based on a reasonable vector table size, platforms are
- * advised to cap this at the hard limit that they're interested in
- * through the machvec.
- */
-#define NR_IRQS 256
-
-/*
- * Convert back and forth between INTEVT and IRQ values.
- */
-#ifdef CONFIG_CPU_HAS_INTEVT
-#define evt2irq(evt)		(((evt) >> 5) - 16)
-#define irq2evt(irq)		(((irq) + 16) << 5)
-#else
-#define evt2irq(evt)		(evt)
-#define irq2evt(irq)		(irq)
-#endif
-
-/*
- * Simple Mask Register Support
- */
-extern void make_maskreg_irq(unsigned int irq);
-extern unsigned short *irq_mask_register;
-
-/*
- * PINT IRQs
- */
-void init_IRQ_pint(void);
-void make_imask_irq(unsigned int irq);
-
-static inline int generic_irq_demux(int irq)
-{
-	return irq;
-}
-
-#define irq_canonicalize(irq)	(irq)
-#define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
-
-#ifdef CONFIG_IRQSTACKS
-extern void irq_ctx_init(int cpu);
-extern void irq_ctx_exit(int cpu);
-# define __ARCH_HAS_DO_SOFTIRQ
-#else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
-#endif
-
-#ifdef CONFIG_CPU_SH5
-#include <asm/cpu/irq.h>
-#endif
-
-#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irq_regs.h b/include/asm-sh/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-sh/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h
deleted file mode 100644
index 46e71da5be6b..000000000000
--- a/include/asm-sh/irqflags.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_H
-#define __ASM_SH_IRQFLAGS_H
-
-#ifdef CONFIG_SUPERH32
-#include "irqflags_32.h"
-#else
-#include "irqflags_64.h"
-#endif
-
-#define raw_local_save_flags(flags) \
-		do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags != 0);
-}
-
-static inline int raw_irqs_disabled(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
-}
-
-#define raw_local_irq_save(flags) \
-		do { (flags) = __raw_local_irq_save(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	if ((flags & 0xf0) != 0xf0)
-		raw_local_irq_enable();
-}
-
-#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/include/asm-sh/irqflags_32.h b/include/asm-sh/irqflags_32.h
deleted file mode 100644
index 60218f541340..000000000000
--- a/include/asm-sh/irqflags_32.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_32_H
-#define __ASM_SH_IRQFLAGS_32_H
-
-static inline void raw_local_irq_enable(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"and	%1, %0\n\t"
-#ifdef CONFIG_CPU_HAS_SR_RB
-		"stc	r6_bank, %1\n\t"
-		"or	%1, %0\n\t"
-#endif
-		"ldc	%0, sr\n\t"
-		: "=&r" (__dummy0), "=r" (__dummy1)
-		: "1" (~0x000000f0)
-		: "memory"
-	);
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"or	#0xf0, %0\n\t"
-		"ldc	%0, sr\n\t"
-		: "=&z" (flags)
-		: /* no inputs */
-		: "memory"
-	);
-}
-
-static inline void set_bl_bit(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"or	%2, %0\n\t"
-		"and	%3, %0\n\t"
-		"ldc	%0, sr\n\t"
-		: "=&r" (__dummy0), "=r" (__dummy1)
-		: "r" (0x10000000), "r" (0xffffff0f)
-		: "memory"
-	);
-}
-
-static inline void clear_bl_bit(void)
-{
-	unsigned long __dummy0, __dummy1;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"and	%2, %0\n\t"
-		"ldc	%0, sr\n\t"
-		: "=&r" (__dummy0), "=r" (__dummy1)
-		: "1" (~0x10000000)
-		: "memory"
-	);
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"stc	sr, %0\n\t"
-		"and	#0xf0, %0\n\t"
-		: "=&z" (flags)
-		: /* no inputs */
-		: "memory"
-	);
-
-	return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags, __dummy;
-
-	__asm__ __volatile__ (
-		"stc	sr, %1\n\t"
-		"mov	%1, %0\n\t"
-		"or	#0xf0, %0\n\t"
-		"ldc	%0, sr\n\t"
-		"mov	%1, %0\n\t"
-		"and	#0xf0, %0\n\t"
-		: "=&z" (flags), "=&r" (__dummy)
-		: /* no inputs */
-		: "memory"
-	);
-
-	return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_32_H */
diff --git a/include/asm-sh/irqflags_64.h b/include/asm-sh/irqflags_64.h
deleted file mode 100644
index 4f6b8a56e7bd..000000000000
--- a/include/asm-sh/irqflags_64.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_64_H
-#define __ASM_SH_IRQFLAGS_64_H
-
-#include <asm/cpu/registers.h>
-
-#define SR_MASK_LL	0x00000000000000f0LL
-#define SR_BL_LL	0x0000000010000000LL
-
-static inline void raw_local_irq_enable(void)
-{
-	unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline void set_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-
-}
-
-static inline void clear_bl_bit(void)
-{
-	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
-
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy0)
-			     : "r" (__dummy1));
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long long __dummy = SR_MASK_LL;
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"getcon	" __SR ", %0\n\t"
-		"and	%0, %1, %0"
-		: "=&r" (flags)
-		: "r" (__dummy));
-
-	return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-	unsigned long flags;
-
-	__asm__ __volatile__ (
-		"getcon	" __SR ", %1\n\t"
-		"or	%1, r63, %0\n\t"
-		"or	%1, %2, %1\n\t"
-		"putcon	%1, " __SR "\n\t"
-		"and	%0, %2, %0"
-		: "=&r" (flags), "=&r" (__dummy0)
-		: "r" (__dummy1));
-
-	return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/include/asm-sh/kdebug.h b/include/asm-sh/kdebug.h
deleted file mode 100644
index 49cd69051a88..000000000000
--- a/include/asm-sh/kdebug.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_SH_KDEBUG_H
-#define __ASM_SH_KDEBUG_H
-
-/* Grossly misnamed. */
-enum die_val {
-	DIE_TRAP,
-};
-
-#endif /* __ASM_SH_KDEBUG_H */
diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h
deleted file mode 100644
index 00f4260ef09b..000000000000
--- a/include/asm-sh/kexec.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef __ASM_SH_KEXEC_H
-#define __ASM_SH_KEXEC_H
-
-#include <asm/ptrace.h>
-#include <asm/string.h>
-
-/*
- * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
- * I.e. Maximum page that is mapped directly into kernel memory,
- * and kmap is not required.
- *
- * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
- * calculation for the amount of memory directly mappable into the
- * kernel memory space.
- */
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-
-#define KEXEC_CONTROL_CODE_SIZE	4096
-
-/* The native architecture */
-#define KEXEC_ARCH KEXEC_ARCH_SH
-
-static inline void crash_setup_regs(struct pt_regs *newregs,
-				    struct pt_regs *oldregs)
-{
-	if (oldregs)
-		memcpy(newregs, oldregs, sizeof(*newregs));
-	else {
-		__asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
-		__asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
-		__asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
-		__asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
-		__asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
-		__asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
-		__asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
-		__asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
-		__asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
-		__asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
-		__asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
-		__asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
-		__asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
-		__asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
-		__asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
-		__asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
-
-		__asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
-		__asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
-		__asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
-
-		__asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
-		__asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
-
-		newregs->pc = (unsigned long)current_text_addr();
-	}
-}
-#endif /* __ASM_SH_KEXEC_H */
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
deleted file mode 100644
index 24e42078f36f..000000000000
--- a/include/asm-sh/kgdb.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on original code by Glenn Engel, Jim Kingdon,
- * David Grothe <dave@gcom.com>, Tigran Aivazian, <tigran@sco.com> and
- * Amit S. Kale <akale@veritas.com>
- * 
- * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by
- * Henry Bell <henry.bell@st.com>
- * 
- * Header file for low-level support for remote debug using GDB. 
- *
- */
-
-#ifndef __KGDB_H
-#define __KGDB_H
-
-#include <asm/ptrace.h>
-
-/* Same as pt_regs but has vbr in place of syscall_nr */
-struct kgdb_regs {
-        unsigned long regs[16];
-        unsigned long pc;
-        unsigned long pr;
-        unsigned long sr;
-        unsigned long gbr;
-        unsigned long mach;
-        unsigned long macl;
-        unsigned long vbr;
-};
-
-/* State info */
-extern char kgdb_in_gdb_mode;
-extern int kgdb_nofault;	/* Ignore bus errors (in gdb mem access) */
-extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
-
-/* SCI */
-extern int kgdb_portnum;
-extern int kgdb_baud;
-extern char kgdb_parity;
-extern char kgdb_bits;
-
-/* Init and interface stuff */
-extern int kgdb_init(void);
-extern int (*kgdb_getchar)(void);
-extern void (*kgdb_putchar)(int);
-
-/* Trap functions */
-typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
-typedef void (kgdb_bus_error_hook_t)(void);
-extern kgdb_debug_hook_t  *kgdb_debug_hook;
-extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
-
-/* Console */
-struct console;
-void kgdb_console_write(struct console *co, const char *s, unsigned count);
-extern int kgdb_console_setup(struct console *, char *);
-
-/* Prototypes for jmp fns */
-#define _JBLEN 9
-typedef        int jmp_buf[_JBLEN];
-extern void    longjmp(jmp_buf __jmpb, int __retval);
-extern int     setjmp(jmp_buf __jmpb);
-
-/* Forced breakpoint */
-#define breakpoint()	__asm__ __volatile__("trapa   #0x3c")
-
-#endif
diff --git a/include/asm-sh/kmap_types.h b/include/asm-sh/kmap_types.h
deleted file mode 100644
index 84d565c696be..000000000000
--- a/include/asm-sh/kmap_types.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __SH_KMAP_TYPES_H
-#define __SH_KMAP_TYPES_H
-
-/* Dummy header just to define km_type. */
-
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
-#endif
-
-enum km_type {
-D(0)	KM_BOUNCE_READ,
-D(1)	KM_SKB_SUNRPC_DATA,
-D(2)	KM_SKB_DATA_SOFTIRQ,
-D(3)	KM_USER0,
-D(4)	KM_USER1,
-D(5)	KM_BIO_SRC_IRQ,
-D(6)	KM_BIO_DST_IRQ,
-D(7)	KM_PTE0,
-D(8)	KM_PTE1,
-D(9)	KM_IRQ0,
-D(10)	KM_IRQ1,
-D(11)	KM_SOFTIRQ0,
-D(12)	KM_SOFTIRQ1,
-D(13)	KM_TYPE_NR
-};
-
-#undef D
-
-#endif
diff --git a/include/asm-sh/kvm.h b/include/asm-sh/kvm.h
deleted file mode 100644
index 6af51dbab2d0..000000000000
--- a/include/asm-sh/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_SH_H
-#define __LINUX_KVM_SH_H
-
-/* sh does not support KVM */
-
-#endif
diff --git a/include/asm-sh/landisk/gio.h b/include/asm-sh/landisk/gio.h
deleted file mode 100644
index 35d7368b718a..000000000000
--- a/include/asm-sh/landisk/gio.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __ASM_SH_LANDISK_GIO_H
-#define __ASM_SH_LANDISK_GIO_H
-
-#include <linux/ioctl.h>
-
-/* version */
-#define VERSION_STR	"1.00"
-
-/* Driver name */
-#define GIO_DRIVER_NAME		"/dev/giodrv"
-
-/* Use 'k' as magic number */
-#define GIODRV_IOC_MAGIC  'k'
-
-#define GIODRV_IOCRESET    _IO(GIODRV_IOC_MAGIC, 0)
-/*
- * S means "Set" through a ptr,
- * T means "Tell" directly
- * G means "Get" (to a pointed var)
- * Q means "Query", response is on the return value
- * X means "eXchange": G and S atomically
- * H means "sHift": T and Q atomically
- */
-#define GIODRV_IOCSGIODATA1   _IOW(GIODRV_IOC_MAGIC,  1, unsigned char *)
-#define GIODRV_IOCGGIODATA1   _IOR(GIODRV_IOC_MAGIC,  2, unsigned char *)
-#define GIODRV_IOCSGIODATA2   _IOW(GIODRV_IOC_MAGIC,  3, unsigned short *)
-#define GIODRV_IOCGGIODATA2   _IOR(GIODRV_IOC_MAGIC,  4, unsigned short *)
-#define GIODRV_IOCSGIODATA4   _IOW(GIODRV_IOC_MAGIC,  5, unsigned long *)
-#define GIODRV_IOCGGIODATA4   _IOR(GIODRV_IOC_MAGIC,  6, unsigned long *)
-#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC,  7, unsigned long *)
-#define GIODRV_IOCHARDRESET   _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
-#define GIODRV_IOC_MAXNR 8
-
-#define GIO_READ 0x00000000
-#define GIO_WRITE 0x00000001
-
-#endif /* __ASM_SH_LANDISK_GIO_H  */
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h
deleted file mode 100644
index 6fb04ab38b9f..000000000000
--- a/include/asm-sh/landisk/iodata_landisk.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __ASM_SH_IODATA_LANDISK_H
-#define __ASM_SH_IODATA_LANDISK_H
-
-/*
- * linux/include/asm-sh/landisk/iodata_landisk.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * IO-DATA LANDISK support
- */
-
-/* Box specific addresses.  */
-
-#define PA_USB		0xa4000000	/* USB Controller M66590 */
-
-#define PA_ATARST	0xb0000000	/* ATA/FATA Access Control Register */
-#define PA_LED		0xb0000001	/* LED Control Register */
-#define PA_STATUS	0xb0000002	/* Switch Status Register */
-#define PA_SHUTDOWN	0xb0000003	/* Shutdown Control Register */
-#define PA_PCIPME	0xb0000004	/* PCI PME Status Register */
-#define PA_IMASK	0xb0000005	/* Interrupt Mask Register */
-/* 2003.10.31 I-O DATA NSD NWG	add.	for shutdown port clear */
-#define PA_PWRINT_CLR	0xb0000006	/* Shutdown Interrupt clear Register */
-
-#define PA_PIDE_OFFSET	0x40		/* CF IDE Offset */
-#define PA_SIDE_OFFSET	0x40		/* HDD IDE Offset */
-
-#define IRQ_PCIINTA	5		/* PCI INTA IRQ */
-#define IRQ_PCIINTB	6		/* PCI INTB IRQ */
-#define IRQ_PCIINDC	7		/* PCI INTC IRQ */
-#define IRQ_PCIINTD	8		/* PCI INTD IRQ */
-#define IRQ_ATA		9		/* ATA IRQ */
-#define IRQ_FATA	10		/* FATA IRQ */
-#define IRQ_POWER	11		/* Power Switch IRQ */
-#define IRQ_BUTTON	12		/* USL-5P Button IRQ */
-#define IRQ_FAULT	13		/* USL-5P Fault  IRQ */
-
-#define __IO_PREFIX landisk
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_IODATA_LANDISK_H */
-
diff --git a/include/asm-sh/lboxre2.h b/include/asm-sh/lboxre2.h
deleted file mode 100644
index e6d160504923..000000000000
--- a/include/asm-sh/lboxre2.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_SH_LBOXRE2_H
-#define __ASM_SH_LBOXRE2_H
-
-/*
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * NTT COMWARE L-BOX RE2 support
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#define IRQ_CF1		9	/* CF1 */
-#define IRQ_CF0		10	/* CF0 */
-#define IRQ_INTD	11	/* INTD */
-#define IRQ_ETH1	12	/* Ether1 */
-#define IRQ_ETH0	13	/* Ether0 */
-#define IRQ_INTA	14	/* INTA */
-
-void init_lboxre2_IRQ(void);
-
-#define __IO_PREFIX	lboxre2
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_LBOXRE2_H */
diff --git a/include/asm-sh/linkage.h b/include/asm-sh/linkage.h
deleted file mode 100644
index 3565a4f4009f..000000000000
--- a/include/asm-sh/linkage.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .balign 4
-#define __ALIGN_STR ".balign 4"
-
-#endif
diff --git a/include/asm-sh/local.h b/include/asm-sh/local.h
deleted file mode 100644
index 9ed9b9cb459a..000000000000
--- a/include/asm-sh/local.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_LOCAL_H
-#define __ASM_SH_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_SH_LOCAL_H */
-
diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h
deleted file mode 100644
index b2e4124070ae..000000000000
--- a/include/asm-sh/machvec.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sh/machvec.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-
-#ifndef _ASM_SH_MACHVEC_H
-#define _ASM_SH_MACHVEC_H
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <asm/machtypes.h>
-
-struct device;
-
-struct sh_machine_vector {
-	void (*mv_setup)(char **cmdline_p);
-	const char *mv_name;
-	int mv_nr_irqs;
-
-	u8 (*mv_inb)(unsigned long);
-	u16 (*mv_inw)(unsigned long);
-	u32 (*mv_inl)(unsigned long);
-	void (*mv_outb)(u8, unsigned long);
-	void (*mv_outw)(u16, unsigned long);
-	void (*mv_outl)(u32, unsigned long);
-
-	u8 (*mv_inb_p)(unsigned long);
-	u16 (*mv_inw_p)(unsigned long);
-	u32 (*mv_inl_p)(unsigned long);
-	void (*mv_outb_p)(u8, unsigned long);
-	void (*mv_outw_p)(u16, unsigned long);
-	void (*mv_outl_p)(u32, unsigned long);
-
-	void (*mv_insb)(unsigned long, void *dst, unsigned long count);
-	void (*mv_insw)(unsigned long, void *dst, unsigned long count);
-	void (*mv_insl)(unsigned long, void *dst, unsigned long count);
-	void (*mv_outsb)(unsigned long, const void *src, unsigned long count);
-	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
-	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
-
-	u8 (*mv_readb)(void __iomem *);
-	u16 (*mv_readw)(void __iomem *);
-	u32 (*mv_readl)(void __iomem *);
-	void (*mv_writeb)(u8, void __iomem *);
-	void (*mv_writew)(u16, void __iomem *);
-	void (*mv_writel)(u32, void __iomem *);
-
-	int (*mv_irq_demux)(int irq);
-
-	void (*mv_init_irq)(void);
-	void (*mv_init_pci)(void);
-
-	void (*mv_heartbeat)(void);
-
-	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
-	void (*mv_ioport_unmap)(void __iomem *);
-};
-
-extern struct sh_machine_vector sh_mv;
-
-#define get_system_type()	sh_mv.mv_name
-
-#define __initmv \
-	__used __section(.machvec.init)
-
-#endif /* _ASM_SH_MACHVEC_H */
diff --git a/include/asm-sh/magicpanelr2.h b/include/asm-sh/magicpanelr2.h
deleted file mode 100644
index c644a77ee357..000000000000
--- a/include/asm-sh/magicpanelr2.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  include/asm-sh/magicpanelr2.h
- *
- *  Copyright (C) 2007  Markus Brunner, Mark Jonas
- *
- *  I/O addresses and bitmasks for Magic Panel Release 2 board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_SH_MAGICPANELR2_H
-#define __ASM_SH_MAGICPANELR2_H
-
-#include <asm/gpio.h>
-
-#define __IO_PREFIX mpr2
-#include <asm/io_generic.h>
-
-
-#define SETBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) | mask, reg)
-#define SETBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) | mask, reg)
-#define SETBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) | mask, reg)
-#define CLRBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) & ~mask, reg)
-#define CLRBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) & ~mask, reg)
-#define CLRBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) & ~mask, reg)
-
-
-#define PA_LED          PORT_PADR      /* LED */
-
-
-/* BSC */
-#define CMNCR           0xA4FD0000UL
-#define CS0BCR          0xA4FD0004UL
-#define CS2BCR          0xA4FD0008UL
-#define CS3BCR          0xA4FD000CUL
-#define CS4BCR          0xA4FD0010UL
-#define CS5ABCR         0xA4FD0014UL
-#define CS5BBCR         0xA4FD0018UL
-#define CS6ABCR         0xA4FD001CUL
-#define CS6BBCR         0xA4FD0020UL
-#define CS0WCR          0xA4FD0024UL
-#define CS2WCR          0xA4FD0028UL
-#define CS3WCR          0xA4FD002CUL
-#define CS4WCR          0xA4FD0030UL
-#define CS5AWCR         0xA4FD0034UL
-#define CS5BWCR         0xA4FD0038UL
-#define CS6AWCR         0xA4FD003CUL
-#define CS6BWCR         0xA4FD0040UL
-
-
-/* usb */
-
-#define PORT_UTRCTL		0xA405012CUL
-#define PORT_UCLKCR_W		0xA40A0008UL
-
-#define INTC_ICR0		0xA414FEE0UL
-#define INTC_ICR1		0xA4140010UL
-#define INTC_ICR2		0xA4140012UL
-
-/* MTD */
-
-#define MPR2_MTD_BOOTLOADER_SIZE	0x00060000UL
-#define MPR2_MTD_KERNEL_SIZE		0x00200000UL
-
-#endif  /* __ASM_SH_MAGICPANELR2_H */
diff --git a/include/asm-sh/mc146818rtc.h b/include/asm-sh/mc146818rtc.h
deleted file mode 100644
index 0aee96a97330..000000000000
--- a/include/asm-sh/mc146818rtc.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-sh/microdev.h b/include/asm-sh/microdev.h
deleted file mode 100644
index 1aed15856e11..000000000000
--- a/include/asm-sh/microdev.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * linux/include/asm-sh/microdev.h
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * Definitions for the SuperH SH4-202 MicroDev board.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-#ifndef __ASM_SH_MICRODEV_H
-#define __ASM_SH_MICRODEV_H
-
-extern void init_microdev_irq(void);
-extern void microdev_print_fpga_intc_status(void);
-
-/*
- * The following are useful macros for manipulating the interrupt
- * controller (INTC) on the CPU-board FPGA.  should be noted that there
- * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
- * these are two different things, both of which need to be prorammed to
- * correctly route - unfortunately, they have the same name and
- * abbreviations!
- */
-#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
-#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
-#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
-
-
-/*
- * The following are the IRQ numbers for the Linux Kernel for external
- * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
- */
-#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
-#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
-#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
-#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
-#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
-
-/*
- * The following are the IRQ numbers for the INTC on the FPGA for
- * external interrupts.  i.e. the bits in the INTC registers in the
- * FPGA.
- */
-#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
-#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
-#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
-#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
-#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
-#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
-#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
-#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
-
-#define MICRODEV_IRQ_PCI_INTA		 8
-#define MICRODEV_IRQ_PCI_INTB		 9
-#define MICRODEV_IRQ_PCI_INTC		10
-#define MICRODEV_IRQ_PCI_INTD		11
-
-#define __IO_PREFIX microdev
-#include <asm/io_generic.h>
-
-#if defined(CONFIG_PCI)
-unsigned char  microdev_pci_inb(unsigned long port);
-unsigned short microdev_pci_inw(unsigned long port);
-unsigned long  microdev_pci_inl(unsigned long port);
-void           microdev_pci_outb(unsigned char  data, unsigned long port);
-void           microdev_pci_outw(unsigned short data, unsigned long port);
-void           microdev_pci_outl(unsigned long  data, unsigned long port);
-#endif
-
-#endif /* __ASM_SH_MICRODEV_H */
diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h
deleted file mode 100644
index 2329363afdc3..000000000000
--- a/include/asm-sh/migor.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-/*
- * linux/include/asm-sh/migor.h
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* GPIO */
-#define MSTPCR0 0xa4150030
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
-#define PORT_PACR 0xa4050100
-#define PORT_PDCR 0xa4050106
-#define PORT_PECR 0xa4050108
-#define PORT_PHCR 0xa405010e
-#define PORT_PJCR 0xa4050110
-#define PORT_PKCR 0xa4050112
-#define PORT_PLCR 0xa4050114
-#define PORT_PMCR 0xa4050116
-#define PORT_PRCR 0xa405011c
-#define PORT_PWCR 0xa4050146
-#define PORT_PXCR 0xa4050148
-#define PORT_PYCR 0xa405014a
-#define PORT_PZCR 0xa405014c
-#define PORT_PADR 0xa4050120
-#define PORT_PWDR 0xa4050166
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRC 0xa405015c
-
-#define PORT_MSELCRB 0xa4050182
-
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
-#define PORT_PSELA 0xa405014e
-#define PORT_PSELB 0xa4050150
-#define PORT_PSELC 0xa4050152
-#define PORT_PSELD 0xa4050154
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRB 0xa405015a
-#define PORT_HIZCRC 0xa405015c
-
-#define BSC_CS6ABCR 0xfec1001c
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/include/asm-sh/mman.h b/include/asm-sh/mman.h
deleted file mode 100644
index 156eb0225cf6..000000000000
--- a/include/asm-sh/mman.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_SH_MMAN_H
-#define __ASM_SH_MMAN_H
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ASM_SH_MMAN_H */
diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h
deleted file mode 100644
index eb0358c097d0..000000000000
--- a/include/asm-sh/mmu.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_id_t[NR_CPUS];
-
-typedef struct {
-#ifdef CONFIG_MMU
-	mm_context_id_t		id;
-	void			*vdso;
-#else
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-#endif
-} mm_context_t;
-
-/*
- * Privileged Space Mapping Buffer (PMB) definitions
- */
-#define PMB_PASCR		0xff000070
-#define PMB_IRMCR		0xff000078
-
-#define PMB_ADDR		0xf6100000
-#define PMB_DATA		0xf7100000
-#define PMB_ENTRY_MAX		16
-#define PMB_E_MASK		0x0000000f
-#define PMB_E_SHIFT		8
-
-#define PMB_SZ_16M		0x00000000
-#define PMB_SZ_64M		0x00000010
-#define PMB_SZ_128M		0x00000080
-#define PMB_SZ_512M		0x00000090
-#define PMB_SZ_MASK		PMB_SZ_512M
-#define PMB_C			0x00000008
-#define PMB_WT			0x00000001
-#define PMB_UB			0x00000200
-#define PMB_V			0x00000100
-
-#define PMB_NO_ENTRY		(-1)
-
-struct pmb_entry;
-
-struct pmb_entry {
-	unsigned long vpn;
-	unsigned long ppn;
-	unsigned long flags;
-
-	/*
-	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
-	 * PMB_NO_ENTRY to search for a free one
-	 */
-	int entry;
-
-	struct pmb_entry *next;
-	/* Adjacent entry link for contiguous multi-entry mappings */
-	struct pmb_entry *link;
-};
-
-/* arch/sh/mm/pmb.c */
-int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
-		    unsigned long flags, int *entry);
-int set_pmb_entry(struct pmb_entry *pmbe);
-void clear_pmb_entry(struct pmb_entry *pmbe);
-struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
-			    unsigned long flags);
-void pmb_free(struct pmb_entry *pmbe);
-long pmb_remap(unsigned long virt, unsigned long phys,
-	       unsigned long size, unsigned long flags);
-void pmb_unmap(unsigned long addr);
-
-#endif /* __MMU_H */
-
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
deleted file mode 100644
index 87e812f68bb0..000000000000
--- a/include/asm-sh/mmu_context.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 - 2007 Paul Mundt
- *
- * ASID handling idea taken from MIPS implementation.
- */
-#ifndef __ASM_SH_MMU_CONTEXT_H
-#define __ASM_SH_MMU_CONTEXT_H
-
-#ifdef __KERNEL__
-#include <asm/cpu/mmu_context.h>
-#include <asm/tlbflush.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * The MMU "context" consists of two things:
- *    (a) TLB cache version (or round, cycle whatever expression you like)
- *    (b) ASID (Address Space IDentifier)
- */
-#define MMU_CONTEXT_ASID_MASK		0x000000ff
-#define MMU_CONTEXT_VERSION_MASK	0xffffff00
-#define MMU_CONTEXT_FIRST_VERSION	0x00000100
-#define NO_CONTEXT			0
-
-/* ASID is 8-bit value, so it can't be 0x100 */
-#define MMU_NO_ASID			0x100
-
-#ifdef CONFIG_MMU
-#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
-#define cpu_context(cpu, mm)	((mm)->context.id[cpu])
-
-#define cpu_asid(cpu, mm)	\
-	(cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
-
-/*
- * Virtual Page Number mask
- */
-#define MMU_VPN_MASK	0xfffff000
-
-#if defined(CONFIG_SUPERH32)
-#include "mmu_context_32.h"
-#else
-#include "mmu_context_64.h"
-#endif
-
-/*
- * Get MMU context if needed.
- */
-static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
-{
-	unsigned long asid = asid_cache(cpu);
-
-	/* Check if we have old version of context. */
-	if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
-		/* It's up to date, do nothing */
-		return;
-
-	/* It's old, we need to get new context with new version. */
-	if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
-		/*
-		 * We exhaust ASID of this version.
-		 * Flush all TLB and start new cycle.
-		 */
-		flush_tlb_all();
-
-#ifdef CONFIG_SUPERH64
-		/*
-		 * The SH-5 cache uses the ASIDs, requiring both the I and D
-		 * cache to be flushed when the ASID is exhausted. Weak.
-		 */
-		flush_cache_all();
-#endif
-
-		/*
-		 * Fix version; Note that we avoid version #0
-		 * to distingush NO_CONTEXT.
-		 */
-		if (!asid)
-			asid = MMU_CONTEXT_FIRST_VERSION;
-	}
-
-	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-static inline int init_new_context(struct task_struct *tsk,
-				   struct mm_struct *mm)
-{
-	int i;
-
-	for (i = 0; i < num_online_cpus(); i++)
-		cpu_context(i, mm) = NO_CONTEXT;
-
-	return 0;
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
-{
-	get_mmu_context(mm, cpu);
-	set_asid(cpu_asid(cpu, mm));
-}
-
-static inline void switch_mm(struct mm_struct *prev,
-			     struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned int cpu = smp_processor_id();
-
-	if (likely(prev != next)) {
-		cpu_set(cpu, next->cpu_vm_mask);
-		set_TTB(next->pgd);
-		activate_context(next, cpu);
-	} else
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
-			activate_context(next, cpu);
-}
-#else
-#define get_mmu_context(mm)		do { } while (0)
-#define init_new_context(tsk,mm)	(0)
-#define destroy_context(mm)		do { } while (0)
-#define set_asid(asid)			do { } while (0)
-#define get_asid()			(0)
-#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
-#define switch_and_save_asid(asid)	(0)
-#define set_TTB(pgd)			do { } while (0)
-#define get_TTB()			(0)
-#define activate_context(mm,cpu)	do { } while (0)
-#define switch_mm(prev,next,tsk)	do { } while (0)
-#endif /* CONFIG_MMU */
-
-#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
-#define deactivate_mm(tsk,mm)		do { } while (0)
-#define enter_lazy_tlb(mm,tsk)		do { } while (0)
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
-/*
- * If this processor has an MMU, we need methods to turn it off/on ..
- * paging_init() will also have to be updated for the processor in
- * question.
- */
-static inline void enable_mmu(void)
-{
-	unsigned int cpu = smp_processor_id();
-
-	/* Enable MMU */
-	ctrl_outl(MMU_CONTROL_INIT, MMUCR);
-	ctrl_barrier();
-
-	if (asid_cache(cpu) == NO_CONTEXT)
-		asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
-
-	set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void disable_mmu(void)
-{
-	unsigned long cr;
-
-	cr = ctrl_inl(MMUCR);
-	cr &= ~MMU_CONTROL_INIT;
-	ctrl_outl(cr, MMUCR);
-
-	ctrl_barrier();
-}
-#else
-/*
- * MMU control handlers for processors lacking memory
- * management hardware.
- */
-#define enable_mmu()	do { } while (0)
-#define disable_mmu()	do { } while (0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/include/asm-sh/mmu_context_32.h b/include/asm-sh/mmu_context_32.h
deleted file mode 100644
index f4f9aebd68b7..000000000000
--- a/include/asm-sh/mmu_context_32.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __ASM_SH_MMU_CONTEXT_32_H
-#define __ASM_SH_MMU_CONTEXT_32_H
-
-/*
- * Destroy context related info for an mm_struct that is about
- * to be put to rest.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	/* Do nothing */
-}
-
-static inline void set_asid(unsigned long asid)
-{
-	unsigned long __dummy;
-
-	__asm__ __volatile__ ("mov.l	%2, %0\n\t"
-			      "and	%3, %0\n\t"
-			      "or	%1, %0\n\t"
-			      "mov.l	%0, %2"
-			      : "=&r" (__dummy)
-			      : "r" (asid), "m" (__m(MMU_PTEH)),
-			        "r" (0xffffff00));
-}
-
-static inline unsigned long get_asid(void)
-{
-	unsigned long asid;
-
-	__asm__ __volatile__ ("mov.l	%1, %0"
-			      : "=r" (asid)
-			      : "m" (__m(MMU_PTEH)));
-	asid &= MMU_CONTEXT_ASID_MASK;
-	return asid;
-}
-
-/* MMU_TTB is used for optimizing the fault handling. */
-static inline void set_TTB(pgd_t *pgd)
-{
-	ctrl_outl((unsigned long)pgd, MMU_TTB);
-}
-
-static inline pgd_t *get_TTB(void)
-{
-	return (pgd_t *)ctrl_inl(MMU_TTB);
-}
-#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/include/asm-sh/mmu_context_64.h b/include/asm-sh/mmu_context_64.h
deleted file mode 100644
index 9649f1c07caf..000000000000
--- a/include/asm-sh/mmu_context_64.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef __ASM_SH_MMU_CONTEXT_64_H
-#define __ASM_SH_MMU_CONTEXT_64_H
-
-/*
- * sh64-specific mmu_context interface.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/cpu/registers.h>
-#include <asm/cacheflush.h>
-
-#define SR_ASID_MASK		0xffffffffff00ffffULL
-#define SR_ASID_SHIFT		16
-
-/*
- * Destroy context related info for an mm_struct that is about
- * to be put to rest.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
-	/* Well, at least free TLB entries */
-	flush_tlb_mm(mm);
-}
-
-static inline unsigned long get_asid(void)
-{
-	unsigned long long sr;
-
-	asm volatile ("getcon   " __SR ", %0\n\t"
-		      : "=r" (sr));
-
-	sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
-	return (unsigned long) sr;
-}
-
-/* Set ASID into SR */
-static inline void set_asid(unsigned long asid)
-{
-	unsigned long long sr, pc;
-
-	asm volatile ("getcon	" __SR ", %0" : "=r" (sr));
-
-	sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
-
-	/*
-	 * It is possible that this function may be inlined and so to avoid
-	 * the assembler reporting duplicate symbols we make use of the
-	 * gas trick of generating symbols using numerics and forward
-	 * reference.
-	 */
-	asm volatile ("movi	1, %1\n\t"
-		      "shlli	%1, 28, %1\n\t"
-		      "or	%0, %1, %1\n\t"
-		      "putcon	%1, " __SR "\n\t"
-		      "putcon	%0, " __SSR "\n\t"
-		      "movi	1f, %1\n\t"
-		      "ori	%1, 1 , %1\n\t"
-		      "putcon	%1, " __SPC "\n\t"
-		      "rte\n"
-		      "1:\n\t"
-		      : "=r" (sr), "=r" (pc) : "0" (sr));
-}
-
-/* arch/sh/kernel/cpu/sh5/entry.S */
-extern unsigned long switch_and_save_asid(unsigned long new_asid);
-
-/* No spare register to twiddle, so use a software cache */
-extern pgd_t *mmu_pdtp_cache;
-
-#define set_TTB(pgd)	(mmu_pdtp_cache = (pgd))
-#define get_TTB()	(mmu_pdtp_cache)
-
-#endif /* __ASM_SH_MMU_CONTEXT_64_H */
diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h
deleted file mode 100644
index 2969253c4042..000000000000
--- a/include/asm-sh/mmzone.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef __ASM_SH_MMZONE_H
-#define __ASM_SH_MMZONE_H
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid)		(node_data[nid])
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_start_pfn + \
-				 NODE_DATA(nid)->node_spanned_pages)
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
-	int nid;
-
-	for (nid = 0; nid < MAX_NUMNODES; nid++)
-		if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid))
-			break;
-
-	return nid;
-}
-
-static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn)
-{
-	return NODE_DATA(pfn_to_nid(pfn));
-}
-
-/* arch/sh/mm/numa.c */
-void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end);
-#else
-static inline void
-setup_bootmem_node(int nid, unsigned long start, unsigned long end)
-{
-}
-#endif /* CONFIG_NEED_MULTIPLE_NODES */
-
-/* Platform specific mem init */
-void __init plat_mem_setup(void);
-
-/* arch/sh/kernel/setup.c */
-void __init setup_bootmem_allocator(unsigned long start_pfn);
-void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
-			       unsigned long end_pfn);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_MMZONE_H */
diff --git a/include/asm-sh/module.h b/include/asm-sh/module.h
deleted file mode 100644
index 46eccd331660..000000000000
--- a/include/asm-sh/module.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _ASM_SH_MODULE_H
-#define _ASM_SH_MODULE_H
-
-/*
- * This file contains the SH architecture specific module code.
- */
-
-struct mod_arch_specific {
-	/* Nothing to see here .. */
-};
-
-#define Elf_Shdr		Elf32_Shdr
-#define Elf_Sym			Elf32_Sym
-#define Elf_Ehdr		Elf32_Ehdr
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-#  define MODULE_PROC_FAMILY "SH2LE "
-# elif defined  CONFIG_CPU_SH3
-#  define MODULE_PROC_FAMILY "SH3LE "
-# elif defined  CONFIG_CPU_SH4
-#  define MODULE_PROC_FAMILY "SH4LE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5LE "
-# else
-#  error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-#  define MODULE_PROC_FAMILY "SH2BE "
-# elif defined  CONFIG_CPU_SH3
-#  define MODULE_PROC_FAMILY "SH3BE "
-# elif defined  CONFIG_CPU_SH4
-#  define MODULE_PROC_FAMILY "SH4BE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5BE "
-# else
-#  error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
-#endif /* _ASM_SH_MODULE_H */
diff --git a/include/asm-sh/msgbuf.h b/include/asm-sh/msgbuf.h
deleted file mode 100644
index 517432343fb5..000000000000
--- a/include/asm-sh/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __ASM_SH_MSGBUF_H
-#define __ASM_SH_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* __ASM_SH_MSGBUF_H */
diff --git a/include/asm-sh/mutex.h b/include/asm-sh/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-sh/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-sh/namei.h b/include/asm-sh/namei.h
deleted file mode 100644
index 338a5d947143..000000000000
--- a/include/asm-sh/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* $Id: namei.h,v 1.3 2000/07/04 06:24:49 gniibe Exp $
- * linux/include/asm-sh/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __ASM_SH_NAMEI_H
-#define __ASM_SH_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __ASM_SH_NAMEI_H */
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
deleted file mode 100644
index 304c30b5d947..000000000000
--- a/include/asm-sh/page.h
+++ /dev/null
@@ -1,184 +0,0 @@
-#ifndef __ASM_SH_PAGE_H
-#define __ASM_SH_PAGE_H
-
-/*
- * Copyright (C) 1999  Niibe Yutaka
- */
-
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_PAGE_SIZE_4KB)
-# define PAGE_SHIFT	12
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-# define PAGE_SHIFT	13
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-# define PAGE_SHIFT	16
-#else
-# error "Bogus kernel page size?"
-#endif
-
-#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-#define PTE_MASK	PAGE_MASK
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define HPAGE_SHIFT	16
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#define HPAGE_SHIFT	18
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define HPAGE_SHIFT	20
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define HPAGE_SHIFT	22
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#define HPAGE_SHIFT	26
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define HPAGE_SHIFT	29
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE-1))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
-#endif
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long shm_align_mask;
-extern unsigned long max_low_pfn, min_low_pfn;
-extern unsigned long memory_start, memory_end;
-
-extern void clear_page(void *to);
-extern void copy_page(void *to, void *from);
-
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
-	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
-	 defined(CONFIG_SH7705_CACHE_32KB))
-struct page;
-struct vm_area_struct;
-extern void clear_user_page(void *to, unsigned long address, struct page *page);
-extern void copy_user_page(void *to, void *from, unsigned long address,
-			   struct page *page);
-#if defined(CONFIG_CPU_SH4)
-extern void copy_user_highpage(struct page *to, struct page *from,
-			       unsigned long vaddr, struct vm_area_struct *vma);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-#endif
-#else
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-#endif
-
-/*
- * These are used to make use of C type-checking..
- */
-#ifdef CONFIG_X2TLB
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
-typedef struct { unsigned long long pgprot; } pgprot_t;
-typedef struct { unsigned long long pgd; } pgd_t;
-#define pte_val(x) \
-	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
-#define __pte(x) \
-	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
-#elif defined(CONFIG_SUPERH32)
-typedef struct { unsigned long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x)	((x).pte_low)
-#define __pte(x)	((pte_t) { (x) } )
-#else
-typedef struct { unsigned long long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x)	((x).pte_low)
-#define __pte(x)	((pte_t) { (x) } )
-#endif
-
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-typedef struct page *pgtable_t;
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * __MEMORY_START and SIZE are the physical addresses and size of RAM.
- */
-#define __MEMORY_START		CONFIG_MEMORY_START
-#define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
-
-/*
- * PAGE_OFFSET is the virtual address of the start of kernel address
- * space.
- */
-#define PAGE_OFFSET		CONFIG_PAGE_OFFSET
-
-/*
- * Virtual to physical RAM address translation.
- *
- * In 29 bit mode, the physical offset of RAM from address 0 is visible in
- * the kernel virtual address space, and thus we don't have to take
- * this into account when translating. However in 32 bit mode this offset
- * is not visible (it is part of the PMB mapping) and so needs to be
- * added or subtracted as required.
- */
-#ifdef CONFIG_32BIT
-#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
-#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
-#else
-#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET)
-#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET))
-#endif
-
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/*
- * PFN = physical frame number (ie PFN 0 == physical address 0)
- * PFN_START is the PFN of the first page of RAM. By defining this we
- * don't have struct page entries for the portion of address space
- * between physical address 0 and the start of RAM.
- */
-#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET		(PFN_START)
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
-#endif
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-/* vDSO support */
-#ifdef CONFIG_VSYSCALL
-#define __HAVE_ARCH_GATE_AREA
-#endif
-
-/*
- * Some drivers need to perform DMA into kmalloc'ed buffers
- * and so we have to increase the kmalloc minalign for this.
- */
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
-
-#ifdef CONFIG_SUPERH64
-/*
- * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
- * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is gauranteed by
- * virtue of L1_CACHE_BYTES, requiring this to only be special cased
- * for slab caches.
- */
-#define ARCH_SLAB_MINALIGN	8
-#endif
-
-#endif /* __ASM_SH_PAGE_H */
diff --git a/include/asm-sh/param.h b/include/asm-sh/param.h
deleted file mode 100644
index ae245afdfd6a..000000000000
--- a/include/asm-sh/param.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_SH_PARAM_H
-#define __ASM_SH_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* __ASM_SH_PARAM_H */
diff --git a/include/asm-sh/parport.h b/include/asm-sh/parport.h
deleted file mode 100644
index f67ba60a2acd..000000000000
--- a/include/asm-sh/parport.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-#ifndef __ASM_SH_PARPORT_H
-#define __ASM_SH_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
-
-static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports(autoirq, autodma);
-}
-
-#endif /* __ASM_SH_PARPORT_H */
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
deleted file mode 100644
index df1d383e18a5..000000000000
--- a/include/asm-sh/pci.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef __ASM_SH_PCI_H
-#define __ASM_SH_PCI_H
-
-#ifdef __KERNEL__
-
-#include <linux/dma-mapping.h>
-
-/* Can be used to override the logic in pci_scan_bus for skipping
-   already-configured bus numbers - to be used for buggy BIOSes
-   or architectures with incomplete PCI setup by the loader */
-
-#define pcibios_assign_all_busses()	1
-#define pcibios_scan_all_fns(a, b)	0
-
-/*
- * A board can define one or more PCI channels that represent built-in (or
- * external) PCI controllers.
- */
-struct pci_channel {
-	struct pci_ops *pci_ops;
-	struct resource *io_resource;
-	struct resource *mem_resource;
-	int first_devfn;
-	int last_devfn;
-};
-
-/*
- * Each board initializes this array and terminates it with a NULL entry.
- */
-extern struct pci_channel board_pci_channels[];
-
-#define PCIBIOS_MIN_IO		board_pci_channels->io_resource->start
-#define PCIBIOS_MIN_MEM		board_pci_channels->mem_resource->start
-
-/*
- * I/O routine helpers
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define PCI_IO_AREA		0xFE400000
-#define PCI_IO_SIZE		0x00400000
-#elif defined(CONFIG_CPU_SH5)
-extern unsigned long PCI_IO_AREA;
-#define PCI_IO_SIZE		0x00010000
-#else
-#define PCI_IO_AREA		0xFE240000
-#define PCI_IO_SIZE		0x00040000
-#endif
-
-#define PCI_MEM_SIZE		0x01000000
-
-#define SH4_PCIIOBR_MASK	0xFFFC0000
-#define pci_ioaddr(addr)	(PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
-
-#if defined(CONFIG_PCI)
-#define is_pci_ioaddr(port)		\
-	(((port) >= PCIBIOS_MIN_IO) &&	\
-	 ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
-#define is_pci_memaddr(port)		\
-	(((port) >= PCIBIOS_MIN_MEM) &&	\
-	 ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
-#else
-#define is_pci_ioaddr(port)	(0)
-#define is_pci_memaddr(port)	(0)
-#endif
-
-struct pci_dev;
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/* Dynamic DMA mapping stuff.
- * SuperH has everything mapped statically like x86.
- */
-
-/* The PCI address space does equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(1)
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <asm/io.h>
-
-/* pci_unmap_{single,page} being a nop depends upon the
- * configuration.
- */
-#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-#endif
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-/* Board-specific fixup routines. */
-void pcibios_fixup(void);
-int pcibios_init_platform(void);
-int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
-
-#ifdef CONFIG_PCI_AUTO
-int pciauto_assign_resources(int busno, struct pci_channel *hose);
-#endif
-
-#endif /* __KERNEL__ */
-
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
-/* generic DMA-mapping stuff */
-#include <asm-generic/pci-dma-compat.h>
-
-#endif /* __ASM_SH_PCI_H */
-
diff --git a/include/asm-sh/percpu.h b/include/asm-sh/percpu.h
deleted file mode 100644
index 4db4b39a4399..000000000000
--- a/include/asm-sh/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_SH_PERCPU
-#define __ARCH_SH_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SH_PERCPU */
diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h
deleted file mode 100644
index 84dd2db7104c..000000000000
--- a/include/asm-sh/pgalloc.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef __ASM_SH_PGALLOC_H
-#define __ASM_SH_PGALLOC_H
-
-#include <linux/quicklist.h>
-#include <asm/page.h>
-
-#define QUICK_PGD 0	/* We preserve special mappings over free */
-#define QUICK_PT 1	/* Other page table pages that are zero on free */
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
-				       pte_t *pte)
-{
-	set_pmd(pmd, __pmd((unsigned long)pte));
-}
-
-static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
-				pgtable_t pte)
-{
-	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void pgd_ctor(void *x)
-{
-	pgd_t *pgd = x;
-
-	memcpy(pgd + USER_PTRS_PER_PGD,
-	       swapper_pg_dir + USER_PTRS_PER_PGD,
-	       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-}
-
-/*
- * Allocate and free page tables.
- */
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	quicklist_free(QUICK_PGD, NULL, pgd);
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-					  unsigned long address)
-{
-	return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
-					unsigned long address)
-{
-	struct page *page;
-	void *pg;
-
-	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
-	if (!pg)
-		return NULL;
-	page = virt_to_page(pg);
-	pgtable_page_ctor(page);
-	return page;
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	quicklist_free(QUICK_PT, NULL, pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	quicklist_free_page(QUICK_PT, NULL, pte);
-}
-
-#define __pte_free_tlb(tlb,pte)				\
-do {							\
-	pgtable_page_dtor(pte);				\
-	tlb_remove_page((tlb), (pte));			\
-} while (0)
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
-
-static inline void check_pgt_cache(void)
-{
-	quicklist_trim(QUICK_PGD, NULL, 25, 16);
-	quicklist_trim(QUICK_PT, NULL, 25, 16);
-}
-
-#endif /* __ASM_SH_PGALLOC_H */
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
deleted file mode 100644
index a4a8f8b93463..000000000000
--- a/include/asm-sh/pgtable.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This file contains the functions and defines necessary to modify and
- * use the SuperH page table tree.
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002 - 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file "COPYING" in the main directory of this
- * archive for more details.
- */
-#ifndef __ASM_SH_PGTABLE_H
-#define __ASM_SH_PGTABLE_H
-
-#include <asm-generic/pgtable-nopmd.h>
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/addrspace.h>
-#include <asm/fixmap.h>
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Effective and physical address definitions, to aid with sign
- * extension.
- */
-#define NEFF		32
-#define	NEFF_SIGN	(1LL << (NEFF - 1))
-#define	NEFF_MASK	(-1LL << NEFF)
-
-#ifdef CONFIG_29BIT
-#define NPHYS		29
-#else
-#define NPHYS		32
-#endif
-
-#define	NPHYS_SIGN	(1LL << (NPHYS - 1))
-#define	NPHYS_MASK	(-1LL << NPHYS)
-
-/*
- * traditional two-level paging structure
- */
-/* PTE bits */
-#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64)
-# define PTE_MAGNITUDE	3	/* 64-bit PTEs on extended mode SH-X2 TLB */
-#else
-# define PTE_MAGNITUDE	2	/* 32-bit PTEs */
-#endif
-#define PTE_SHIFT	PAGE_SHIFT
-#define PTE_BITS	(PTE_SHIFT - PTE_MAGNITUDE)
-
-/* PGD bits */
-#define PGDIR_SHIFT	(PTE_SHIFT + PTE_BITS)
-#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-/* Entries per level */
-#define PTRS_PER_PTE	(PAGE_SIZE / (1 << PTE_MAGNITUDE))
-#define PTRS_PER_PGD	(PAGE_SIZE / sizeof(pgd_t))
-
-#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
-#define FIRST_USER_ADDRESS	0
-
-#ifdef CONFIG_32BIT
-#define PHYS_ADDR_MASK		0xffffffff
-#else
-#define PHYS_ADDR_MASK		0x1fffffff
-#endif
-
-#define PTE_PHYS_MASK		(PHYS_ADDR_MASK & PAGE_MASK)
-
-#ifdef CONFIG_SUPERH32
-#define VMALLOC_START	(P3SEG)
-#else
-#define VMALLOC_START	(0xf0000000)
-#endif
-#define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
-
-#if defined(CONFIG_SUPERH32)
-#include <asm/pgtable_32.h>
-#else
-#include <asm/pgtable_64.h>
-#endif
-
-/*
- * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
- * protection for execute, and considers it the same as a read. Also, write
- * permission implies read permission. This is the closest we can get..
- *
- * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
- * not only supporting separate execute, read, and write bits, but having
- * completely separate permission bits for user and kernel space.
- */
-	 /*xwr*/
-#define __P000	PAGE_NONE
-#define __P001	PAGE_READONLY
-#define __P010	PAGE_COPY
-#define __P011	PAGE_COPY
-#define __P100	PAGE_EXECREAD
-#define __P101	PAGE_EXECREAD
-#define __P110	PAGE_COPY
-#define __P111	PAGE_COPY
-
-#define __S000	PAGE_NONE
-#define __S001	PAGE_READONLY
-#define __S010	PAGE_WRITEONLY
-#define __S011	PAGE_SHARED
-#define __S100	PAGE_EXECREAD
-#define __S101	PAGE_EXECREAD
-#define __S110	PAGE_RWX
-#define __S111	PAGE_RWX
-
-typedef pte_t *pte_addr_t;
-
-#define kern_addr_valid(addr)	(1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
-		remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#define pte_pfn(x)		((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
-	defined(CONFIG_SH7705_CACHE_32KB))
-struct mm_struct;
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-#endif
-
-struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct * vma,
-			     unsigned long address, pte_t pte);
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void paging_init(void);
-extern void page_table_range_init(unsigned long start, unsigned long end,
-				  pgd_t *pgd);
-
-#include <asm-generic/pgtable.h>
-
-#endif /* __ASM_SH_PGTABLE_H */
diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h
deleted file mode 100644
index cbc731d35c25..000000000000
--- a/include/asm-sh/pgtable_32.h
+++ /dev/null
@@ -1,477 +0,0 @@
-#ifndef __ASM_SH_PGTABLE_32_H
-#define __ASM_SH_PGTABLE_32_H
-
-/*
- * Linux PTEL encoding.
- *
- * Hardware and software bit definitions for the PTEL value (see below for
- * notes on SH-X2 MMUs and 64-bit PTEs):
- *
- * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
- *
- * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
- *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
- *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
- *
- *   In order to keep this relatively clean, do not use these for defining
- *   SH-3 specific flags until all of the other unused bits have been
- *   exhausted.
- *
- * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
- *
- * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
- *
- * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
- *   and timing control which (together with bit 0) are moved into the
- *   old-style PTEA on the parts that support it.
- *
- * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
- *
- * SH-X2 MMUs and extended PTEs
- *
- * SH-X2 supports an extended mode TLB with split data arrays due to the
- * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
- * SZ bit placeholders still exist in data array 1, but are implemented as
- * reserved bits, with the real logic existing in data array 2.
- *
- * The downside to this is that we can no longer fit everything in to a 32-bit
- * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
- * side, this gives us quite a few spare bits to play with for future usage.
- */
-/* Legacy and compat mode bits */
-#define	_PAGE_WT	0x001		/* WT-bit on SH-4, 0 on SH-3 */
-#define _PAGE_HW_SHARED	0x002		/* SH-bit  : shared among processes */
-#define _PAGE_DIRTY	0x004		/* D-bit   : page changed */
-#define _PAGE_CACHABLE	0x008		/* C-bit   : cachable */
-#define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
-#define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
-#define _PAGE_USER	0x040		/* PR1-bit : user space access allowed*/
-#define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
-#define _PAGE_PRESENT	0x100		/* V-bit   : page is valid */
-#define _PAGE_PROTNONE	0x200		/* software: if not present  */
-#define _PAGE_ACCESSED	0x400		/* software: page referenced */
-#define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
-
-#define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
-#define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
-
-/* Extended mode bits */
-#define _PAGE_EXT_ESZ0		0x0010	/* ESZ0-bit: Size of page */
-#define _PAGE_EXT_ESZ1		0x0020	/* ESZ1-bit: Size of page */
-#define _PAGE_EXT_ESZ2		0x0040	/* ESZ2-bit: Size of page */
-#define _PAGE_EXT_ESZ3		0x0080	/* ESZ3-bit: Size of page */
-
-#define _PAGE_EXT_USER_EXEC	0x0100	/* EPR0-bit: User space executable */
-#define _PAGE_EXT_USER_WRITE	0x0200	/* EPR1-bit: User space writable */
-#define _PAGE_EXT_USER_READ	0x0400	/* EPR2-bit: User space readable */
-
-#define _PAGE_EXT_KERN_EXEC	0x0800	/* EPR3-bit: Kernel space executable */
-#define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
-#define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
-
-/* Wrapper for extended mode pgprot twiddling */
-#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
-
-/* software: moves to PTEA.TC (Timing Control) */
-#define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
-#define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
-
-/* software: moves to PTEA.SA[2:0] (Space Attributes) */
-#define _PAGE_PCC_IODYN 0x00000001	/* IO space, dynamically sized bus */
-#define _PAGE_PCC_IO8	0x20000000	/* IO space, 8 bit bus */
-#define _PAGE_PCC_IO16	0x20000001	/* IO space, 16 bit bus */
-#define _PAGE_PCC_COM8	0x40000000	/* Common Memory space, 8 bit bus */
-#define _PAGE_PCC_COM16	0x40000001	/* Common Memory space, 16 bit bus */
-#define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
-#define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
-
-/* Mask which drops unused bits from the PTEL value */
-#if defined(CONFIG_CPU_SH3)
-#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
-				 _PAGE_FILE	| _PAGE_SZ1	| \
-				 _PAGE_HW_SHARED)
-#elif defined(CONFIG_X2TLB)
-/* Get rid of the legacy PR/SZ bits when using extended mode */
-#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | \
-				 _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
-#else
-#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
-#endif
-
-#define _PAGE_FLAGS_HARDWARE_MASK	(PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
-
-/* Hardware flags, page size encoding */
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_PAGE_SIZE_4KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ0)
-# elif defined(CONFIG_PAGE_SIZE_8KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ1)
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ2)
-# endif
-#else
-# if defined(CONFIG_PAGE_SIZE_4KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_SZ0
-# elif defined(CONFIG_PAGE_SIZE_64KB)
-#  define _PAGE_FLAGS_HARD	_PAGE_SZ1
-# endif
-#endif
-
-#if defined(CONFIG_X2TLB)
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ3)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
-#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
-# endif
-#else
-# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#  define _PAGE_SZHUGE	(_PAGE_SZ1)
-# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
-# endif
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
-#endif
-
-#define _PAGE_CHG_MASK \
-	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_USER_READ  | \
-					   _PAGE_EXT_USER_WRITE))
-
-#define PAGE_EXECREAD	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
-					   _PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_USER_EXEC | \
-					   _PAGE_EXT_USER_READ))
-
-#define PAGE_COPY	PAGE_EXECREAD
-
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_USER_READ))
-
-#define PAGE_WRITEONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_USER_WRITE))
-
-#define PAGE_RWX	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
-				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_READ  | \
-					   _PAGE_EXT_KERN_EXEC  | \
-					   _PAGE_EXT_USER_WRITE | \
-					   _PAGE_EXT_USER_READ  | \
-					   _PAGE_EXT_USER_EXEC))
-
-#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_NOCACHE \
-			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
-				 _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_EXEC))
-
-#define PAGE_KERNEL_PCC(slot, type) \
-			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
-				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
-					   _PAGE_EXT_KERN_WRITE | \
-					   _PAGE_EXT_KERN_EXEC) \
-				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
-				 (type))
-
-#elif defined(CONFIG_MMU) /* SH-X TLB */
-#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
-				 _PAGE_CACHABLE | _PAGE_ACCESSED | \
-				 _PAGE_FLAGS_HARD)
-
-#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-
-#define PAGE_EXECREAD	PAGE_READONLY
-#define PAGE_RWX	PAGE_SHARED
-#define PAGE_WRITEONLY	PAGE_SHARED
-
-#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_NOCACHE \
-			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
-				 _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
-				 _PAGE_DIRTY | _PAGE_ACCESSED | \
-				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
-
-#define PAGE_KERNEL_PCC(slot, type) \
-			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
-				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
-				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
-				 (type))
-#else /* no mmu */
-#define PAGE_NONE		__pgprot(0)
-#define PAGE_SHARED		__pgprot(0)
-#define PAGE_COPY		__pgprot(0)
-#define PAGE_EXECREAD		__pgprot(0)
-#define PAGE_RWX		__pgprot(0)
-#define PAGE_READONLY		__pgprot(0)
-#define PAGE_WRITEONLY		__pgprot(0)
-#define PAGE_KERNEL		__pgprot(0)
-#define PAGE_KERNEL_NOCACHE	__pgprot(0)
-#define PAGE_KERNEL_RO		__pgprot(0)
-
-#define PAGE_KERNEL_PCC(slot, type) \
-				__pgprot(0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-#ifdef CONFIG_X2TLB
-static inline void set_pte(pte_t *ptep, pte_t pte)
-{
-	ptep->pte_high = pte.pte_high;
-	smp_wmb();
-	ptep->pte_low = pte.pte_low;
-}
-#else
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#endif
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define pfn_pte(pfn, prot) \
-	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) \
-	__pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define pte_none(x)		(!pte_val(x))
-#define pte_present(x)		((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x)	(!pmd_val(x))
-#define pmd_present(x)	(pmd_val(x))
-#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
-#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
-
-#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
-#define pte_page(x)	pfn_to_page(pte_pfn(x))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_not_present(pte)	(!((pte).pte_low & _PAGE_PRESENT))
-#define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
-#define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
-#define pte_file(pte)		((pte).pte_low & _PAGE_FILE)
-#define pte_special(pte)	(0)
-
-#ifdef CONFIG_X2TLB
-#define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
-#else
-#define pte_write(pte)		((pte).pte_low & _PAGE_RW)
-#endif
-
-#define PTE_BIT_FUNC(h,fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
-
-#ifdef CONFIG_X2TLB
-/*
- * We cheat a bit in the SH-X2 TLB case. As the permission bits are
- * individually toggled (and user permissions are entirely decoupled from
- * kernel permissions), we attempt to couple them a bit more sanely here.
- */
-PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
-PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
-PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
-#else
-PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
-PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
-PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
-#endif
-
-PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
-PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
-PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
-
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-/*
- * Macro and implementation to make a page protection as uncachable.
- */
-#define pgprot_writecombine(prot) \
-	__pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-#define pgprot_noncached	 pgprot_writecombine
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte.pte_low &= _PAGE_CHG_MASK;
-	pte.pte_low |= pgprot_val(newprot);
-
-#ifdef CONFIG_X2TLB
-	pte.pte_high |= pgprot_val(newprot) >> 32;
-#endif
-
-	return pte;
-}
-
-#define pmd_page_vaddr(pmd)	((unsigned long)pmd_val(pmd))
-#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
-	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
-#define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
-#define pte_offset_map_nested(dir, address)	pte_offset_kernel(dir, address)
-
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
-
-#ifdef CONFIG_X2TLB
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
-	       &(e), (e).pte_high, (e).pte_low)
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
-#else
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-#endif
-
-/*
- * Encode and de-code a swap entry
- *
- * Constraints:
- *	_PAGE_FILE at bit 0
- *	_PAGE_PRESENT at bit 8
- *	_PAGE_PROTNONE at bit 9
- *
- * For the normal case, we encode the swap type into bits 0:7 and the
- * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
- * preserved bits in the low 32-bits and use the upper 32 as the swap
- * offset (along with a 5-bit type), following the same approach as x86
- * PAE. This keeps the logic quite simple, and allows for a full 32
- * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
- * in the pte_low case.
- *
- * As is evident by the Alpha code, if we ever get a 64-bit unsigned
- * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
- * much cleaner..
- *
- * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
- *       and _PAGE_PROTNONE bits
- */
-#ifdef CONFIG_X2TLB
-#define __swp_type(x)			((x).val & 0x1f)
-#define __swp_offset(x)			((x).val >> 5)
-#define __swp_entry(type, offset)	((swp_entry_t){ (type) | (offset) << 5})
-#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
-#define __swp_entry_to_pte(x)		((pte_t){ 0, (x).val })
-
-/*
- * Encode and decode a nonlinear file mapping entry
- */
-#define pte_to_pgoff(pte)		((pte).pte_high)
-#define pgoff_to_pte(off)		((pte_t) { _PAGE_FILE, (off) })
-
-#define PTE_FILE_MAX_BITS		32
-#else
-#define __swp_type(x)			((x).val & 0xff)
-#define __swp_offset(x)			((x).val >> 10)
-#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) <<10})
-
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 1 })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 1 })
-
-/*
- * Encode and decode a nonlinear file mapping entry
- */
-#define PTE_FILE_MAX_BITS	29
-#define pte_to_pgoff(pte)	(pte_val(pte) >> 1)
-#define pgoff_to_pte(off)	((pte_t) { ((off) << 1) | _PAGE_FILE })
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/include/asm-sh/pgtable_64.h b/include/asm-sh/pgtable_64.h
deleted file mode 100644
index c78990cda557..000000000000
--- a/include/asm-sh/pgtable_64.h
+++ /dev/null
@@ -1,314 +0,0 @@
-#ifndef __ASM_SH_PGTABLE_64_H
-#define __ASM_SH_PGTABLE_64_H
-
-/*
- * include/asm-sh/pgtable_64.h
- *
- * This file contains the functions and defines necessary to modify and use
- * the SuperH page table tree.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- * Copyright (C) 2003, 2004  Richard Curnow
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-/*
- * Error outputs.
- */
-#define pte_ERROR(e) \
-	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Table setting routines. Used within arch/mm only.
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
-{
-	unsigned long long x = ((unsigned long long) pteval.pte_low);
-	unsigned long long *xp = (unsigned long long *) pteptr;
-	/*
-	 * Sign-extend based on NPHYS.
-	 */
-	*(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x;
-}
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
-{
-	pmd_val(*pmdp) = (unsigned long) ptep;
-}
-
-/*
- * PGD defines. Top level.
- */
-
-/* To find an entry in a generic PGD. */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define __pgd_offset(address) pgd_index(address)
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
-
-/* To find an entry in a kernel PGD. */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/*
- * PMD level access routines. Same notes as above.
- */
-#define _PMD_EMPTY		0x0
-/* Either the PMD is empty or present, it's not paged out */
-#define pmd_present(pmd_entry)	(pmd_val(pmd_entry) & _PAGE_PRESENT)
-#define pmd_clear(pmd_entry_p)	(set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY)))
-#define pmd_none(pmd_entry)	(pmd_val((pmd_entry)) == _PMD_EMPTY)
-#define pmd_bad(pmd_entry)	((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
-#define pmd_page_vaddr(pmd_entry) \
-	((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK))
-
-#define pmd_page(pmd) \
-	(virt_to_page(pmd_val(pmd)))
-
-/* PMD to PTE dereferencing */
-#define pte_index(address) \
-		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-#define pte_offset_kernel(dir, addr) \
-		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
-
-#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
-#define pte_offset_map_nested(dir,addr)	pte_offset_kernel(dir, addr)
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
-
-#ifndef __ASSEMBLY__
-#define IOBASE_VADDR	0xff000000
-#define IOBASE_END	0xffffffff
-
-/*
- * PTEL coherent flags.
- * See Chapter 17 ST50 CPU Core Volume 1, Architecture.
- */
-/* The bits that are required in the SH-5 TLB are placed in the h/w-defined
-   positions, to avoid expensive bit shuffling on every refill.  The remaining
-   bits are used for s/w purposes and masked out on each refill.
-
-   Note, the PTE slots are used to hold data of type swp_entry_t when a page is
-   swapped out.  Only the _PAGE_PRESENT flag is significant when the page is
-   swapped out, and it must be placed so that it doesn't overlap either the
-   type or offset fields of swp_entry_t.  For x86, offset is at [31:8] and type
-   at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t.  This
-   scheme doesn't map to SH-5 because bit [0] controls cacheability.  So bit
-   [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split
-   into 2 pieces.  That is handled by SWP_ENTRY and SWP_TYPE below. */
-#define _PAGE_WT	0x001  /* CB0: if cacheable, 1->write-thru, 0->write-back */
-#define _PAGE_DEVICE	0x001  /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */
-#define _PAGE_CACHABLE	0x002  /* CB1: uncachable/cachable */
-#define _PAGE_PRESENT	0x004  /* software: page referenced */
-#define _PAGE_FILE	0x004  /* software: only when !present */
-#define _PAGE_SIZE0	0x008  /* SZ0-bit : size of page */
-#define _PAGE_SIZE1	0x010  /* SZ1-bit : size of page */
-#define _PAGE_SHARED	0x020  /* software: reflects PTEH's SH */
-#define _PAGE_READ	0x040  /* PR0-bit : read access allowed */
-#define _PAGE_EXECUTE	0x080  /* PR1-bit : execute access allowed */
-#define _PAGE_WRITE	0x100  /* PR2-bit : write access allowed */
-#define _PAGE_USER	0x200  /* PR3-bit : user space access allowed */
-#define _PAGE_DIRTY	0x400  /* software: page accessed in write */
-#define _PAGE_ACCESSED	0x800  /* software: page referenced */
-
-/* Mask which drops software flags */
-#define _PAGE_FLAGS_HARDWARE_MASK	0xfffffffffffff3dbLL
-
-/*
- * HugeTLB support
- */
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define _PAGE_SZHUGE	(_PAGE_SIZE0)
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
-#define _PAGE_SZHUGE	(_PAGE_SIZE1)
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
-#define _PAGE_SZHUGE	(_PAGE_SIZE0 | _PAGE_SIZE1)
-#endif
-
-/*
- * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
- * to make pte_mkhuge() happy.
- */
-#ifndef _PAGE_SZHUGE
-# define _PAGE_SZHUGE	(0)
-#endif
-
-/*
- * Default flags for a Kernel page.
- * This is fundametally also SHARED because the main use of this define
- * (other than for PGD/PMD entries) is for the VMALLOC pool which is
- * contextless.
- *
- * _PAGE_EXECUTE is required for modules
- *
- */
-#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
-			 _PAGE_EXECUTE | \
-			 _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \
-			 _PAGE_SHARED)
-
-/* Default flags for a User page */
-#define _PAGE_TABLE	(_KERNPG_TABLE | _PAGE_USER)
-
-#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-/*
- * We have full permissions (Read/Write/Execute/Shared).
- */
-#define _PAGE_COMMON	(_PAGE_PRESENT | _PAGE_USER | \
-			 _PAGE_CACHABLE | _PAGE_ACCESSED)
-
-#define PAGE_NONE	__pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED)
-#define PAGE_SHARED	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \
-				 _PAGE_SHARED)
-#define PAGE_EXECREAD	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE)
-
-/*
- * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default
- * protection mode for the stack.
- */
-#define PAGE_COPY	PAGE_EXECREAD
-
-#define PAGE_READONLY	__pgprot(_PAGE_COMMON | _PAGE_READ)
-#define PAGE_WRITEONLY	__pgprot(_PAGE_COMMON | _PAGE_WRITE)
-#define PAGE_RWX	__pgprot(_PAGE_COMMON | _PAGE_READ | \
-				 _PAGE_WRITE | _PAGE_EXECUTE)
-#define PAGE_KERNEL	__pgprot(_KERNPG_TABLE)
-
-#define PAGE_KERNEL_NOCACHE \
-			__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
-				 _PAGE_EXECUTE | _PAGE_ACCESSED | \
-				 _PAGE_DIRTY | _PAGE_SHARED)
-
-/* Make it a device mapping for maximum safety (e.g. for mapping device
-   registers into user-space via /dev/map).  */
-#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE)
-#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
-
-/*
- * Handling allocation failures during page table setup.
- */
-extern void __handle_bad_pmd_kernel(pmd_t * pmd);
-#define __handle_bad_pmd(x)	__handle_bad_pmd_kernel(x)
-
-/*
- * PTE level access routines.
- *
- * Note1:
- * It's the tree walk leaf. This is physical address to be stored.
- *
- * Note 2:
- * Regarding the choice of _PTE_EMPTY:
-
-   We must choose a bit pattern that cannot be valid, whether or not the page
-   is present.  bit[2]==1 => present, bit[2]==0 => swapped out.  If swapped
-   out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is
-   left for us to select.  If we force bit[7]==0 when swapped out, we could use
-   the combination bit[7,2]=2'b10 to indicate an empty PTE.  Alternatively, if
-   we force bit[7]==1 when swapped out, we can use all zeroes to indicate
-   empty.  This is convenient, because the page tables get cleared to zero
-   when they are allocated.
-
- */
-#define _PTE_EMPTY	0x0
-#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,xp)	(set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY)))
-#define pte_none(x)	(pte_val(x) == _PTE_EMPTY)
-
-/*
- * Some definitions to translate between mem_map, PTEs, and page
- * addresses:
- */
-
-/*
- * Given a PTE, return the index of the mem_map[] entry corresponding
- * to the page frame the PTE. Get the absolute physical address, make
- * a relative physical address and translate it to an index.
- */
-#define pte_pagenr(x)		(((unsigned long) (pte_val(x)) - \
-				 __MEMORY_START) >> PAGE_SHIFT)
-
-/*
- * Given a PTE, return the "struct page *".
- */
-#define pte_page(x)		(mem_map + pte_pagenr(x))
-
-/*
- * Return number of (down rounded) MB corresponding to x pages.
- */
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
-
-/*
- * The following have defined behavior only work if pte_present() is true.
- */
-static inline int pte_dirty(pte_t pte)  { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte)  { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte)   { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_write(pte_t pte)  { return pte_val(pte) & _PAGE_WRITE; }
-static inline int pte_special(pte_t pte){ return 0; }
-
-static inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; }
-static inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; }
-static inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
-static inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
-static inline pte_t pte_mkhuge(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; }
-static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
-
-
-/*
- * Conversion functions: convert a page and protection to a page entry.
- *
- * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
- */
-#define mk_pte(page,pgprot)							\
-({										\
-	pte_t __pte;								\
-										\
-	set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | 		\
-		__MEMORY_START | pgprot_val((pgprot))));			\
-	__pte;									\
-})
-
-/*
- * This takes a (absolute) physical page address that is used
- * by the remapping functions
- */
-#define mk_pte_phys(physpage, pgprot) \
-({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; })
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
-
-/* Encode and decode a swap entry */
-#define __swp_type(x)			(((x).val & 3) + (((x).val >> 1) & 0x3c))
-#define __swp_offset(x)			((x).val >> 8)
-#define __swp_entry(type, offset)	((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) })
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
-
-/* Encode and decode a nonlinear file mapping entry */
-#define PTE_FILE_MAX_BITS		29
-#define pte_to_pgoff(pte)		(pte_val(pte))
-#define pgoff_to_pte(off)		((pte_t) { (off) | _PAGE_FILE })
-
-#endif /* !__ASSEMBLY__ */
-
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#endif /* __ASM_SH_PGTABLE_64_H */
diff --git a/include/asm-sh/pm.h b/include/asm-sh/pm.h
deleted file mode 100644
index 56fdbd6b1c94..000000000000
--- a/include/asm-sh/pm.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
- *
- */
-#ifndef __ASM_SH_PM_H
-#define __ASM_SH_PM_H
-
-extern u8 wakeup_start;
-extern u8 wakeup_end;
-
-void pm_enter(void);
-
-#endif
diff --git a/include/asm-sh/poll.h b/include/asm-sh/poll.h
deleted file mode 100644
index c98509d3149e..000000000000
--- a/include/asm-sh/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h
deleted file mode 100644
index 4eeb723aee7e..000000000000
--- a/include/asm-sh/posix_types.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifdef __KERNEL__
-# ifdef CONFIG_SUPERH32
-#  include "posix_types_32.h"
-# else
-#  include "posix_types_64.h"
-# endif
-#else
-# ifdef __SH5__
-#  include "posix_types_64.h"
-# else
-#  include "posix_types_32.h"
-# endif
-#endif /* __KERNEL__ */
diff --git a/include/asm-sh/posix_types_32.h b/include/asm-sh/posix_types_32.h
deleted file mode 100644
index 0a3d2f54ab27..000000000000
--- a/include/asm-sh/posix_types_32.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef __ASM_SH_POSIX_TYPES_H
-#define __ASM_SH_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned short	__kernel_mode_t;
-typedef unsigned short	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned short	__kernel_ipc_pid_t;
-typedef unsigned short	__kernel_uid_t;
-typedef unsigned short	__kernel_gid_t;
-typedef unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned short	__kernel_old_uid_t;
-typedef unsigned short	__kernel_old_gid_t;
-typedef unsigned short	__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef	__FD_CLR
-static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef	__FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{ 
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef	__FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
-{
-	unsigned long *__tmp = __p->fds_bits;
-	int __i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		case 16:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			__tmp[ 8] = 0; __tmp[ 9] = 0;
-			__tmp[10] = 0; __tmp[11] = 0;
-			__tmp[12] = 0; __tmp[13] = 0;
-			__tmp[14] = 0; __tmp[15] = 0;
-			return;
-
-		case 8:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			return;
-
-		case 4:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			return;
-		}
-	}
-	__i = __FDSET_LONGS;
-	while (__i) {
-		__i--;
-		*__tmp = 0;
-		__tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/include/asm-sh/posix_types_64.h b/include/asm-sh/posix_types_64.h
deleted file mode 100644
index 0620317a6f0f..000000000000
--- a/include/asm-sh/posix_types_64.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef __ASM_SH64_POSIX_TYPES_H
-#define __ASM_SH64_POSIX_TYPES_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/posix_types.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned short	__kernel_mode_t;
-typedef unsigned short	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned short	__kernel_ipc_pid_t;
-typedef unsigned short	__kernel_uid_t;
-typedef unsigned short	__kernel_gid_t;
-typedef long unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned short	__kernel_old_uid_t;
-typedef unsigned short	__kernel_old_gid_t;
-typedef unsigned short	__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef	__FD_CLR
-static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef	__FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{
-	unsigned long __tmp = __fd / __NFDBITS;
-	unsigned long __rem = __fd % __NFDBITS;
-	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef	__FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
-{
-	unsigned long *__tmp = __p->fds_bits;
-	int __i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		case 16:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			__tmp[ 8] = 0; __tmp[ 9] = 0;
-			__tmp[10] = 0; __tmp[11] = 0;
-			__tmp[12] = 0; __tmp[13] = 0;
-			__tmp[14] = 0; __tmp[15] = 0;
-			return;
-
-		case 8:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			__tmp[ 4] = 0; __tmp[ 5] = 0;
-			__tmp[ 6] = 0; __tmp[ 7] = 0;
-			return;
-
-		case 4:
-			__tmp[ 0] = 0; __tmp[ 1] = 0;
-			__tmp[ 2] = 0; __tmp[ 3] = 0;
-			return;
-		}
-	}
-	__i = __FDSET_LONGS;
-	while (__i) {
-		__i--;
-		*__tmp = 0;
-		__tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif /* __ASM_SH64_POSIX_TYPES_H */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
deleted file mode 100644
index b7c7ce80f03e..000000000000
--- a/include/asm-sh/processor.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __ASM_SH_PROCESSOR_H
-#define __ASM_SH_PROCESSOR_H
-
-#include <asm/cpu-features.h>
-
-#ifndef __ASSEMBLY__
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *
- *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
- *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
- *  for parsing the subtype in get_cpu_subtype().
- */
-enum cpu_type {
-	/* SH-2 types */
-	CPU_SH7619,
-
-	/* SH-2A types */
-	CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
-
-	/* SH-3 types */
-	CPU_SH7705, CPU_SH7706, CPU_SH7707,
-	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
-	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
-	CPU_SH7720, CPU_SH7721, CPU_SH7729,
-
-	/* SH-4 types */
-	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
-	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
-
-	/* SH-4A types */
-	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
-	CPU_SH7723, CPU_SHX3,
-
-	/* SH4AL-DSP types */
-	CPU_SH7343, CPU_SH7722, CPU_SH7366,
-
-	/* SH-5 types */
-        CPU_SH5_101, CPU_SH5_103,
-
-	/* Unknown subtype */
-	CPU_SH_NONE
-};
-
-/* Forward decl */
-struct sh_cpuinfo;
-
-/* arch/sh/kernel/setup.c */
-const char *get_cpu_subtype(struct sh_cpuinfo *c);
-
-#ifdef CONFIG_VSYSCALL
-int vsyscall_init(void);
-#else
-#define vsyscall_init() do { } while (0)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_SUPERH32
-# include "processor_32.h"
-#else
-# include "processor_64.h"
-#endif
-
-#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h
deleted file mode 100644
index c09305d6a9d9..000000000000
--- a/include/asm-sh/processor_32.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * include/asm-sh/processor.h
- *
- * Copyright (C) 1999, 2000  Niibe Yutaka
- * Copyright (C) 2002, 2003  Paul Mundt
- */
-
-#ifndef __ASM_SH_PROCESSOR_32_H
-#define __ASM_SH_PROCESSOR_32_H
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/cache.h>
-#include <asm/ptrace.h>
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n1:":"=z" (pc)); pc; })
-
-/* Core Processor Version Register */
-#define CCN_PVR		0xff000030
-#define CCN_CVR		0xff000040
-#define CCN_PRR		0xff000044
-
-struct sh_cpuinfo {
-	unsigned int type;
-	unsigned long loops_per_jiffy;
-	unsigned long asid_cache;
-
-	struct cache_info icache;	/* Primary I-cache */
-	struct cache_info dcache;	/* Primary D-cache */
-	struct cache_info scache;	/* Secondary cache */
-
-	unsigned long flags;
-} __attribute__ ((aligned(L1_CACHE_BYTES)));
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-/*
- * User space process size: 2GB.
- *
- * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
- */
-#define TASK_SIZE	0x7c000000UL
-
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- *     When it's set, it means the processor doesn't have right to use FPU,
- *     and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- *     Interrupt level mask
- */
-#define SR_DSP		0x00001000
-#define SR_IMASK	0x000000f0
-#define SR_FD		0x00008000
-
-/*
- * FPU structure and data
- */
-
-struct sh_fpu_hard_struct {
-	unsigned long fp_regs[16];
-	unsigned long xfp_regs[16];
-	unsigned long fpscr;
-	unsigned long fpul;
-
-	long status; /* software status information */
-};
-
-/* Dummy fpu emulator  */
-struct sh_fpu_soft_struct {
-	unsigned long fp_regs[16];
-	unsigned long xfp_regs[16];
-	unsigned long fpscr;
-	unsigned long fpul;
-
-	unsigned char lookahead;
-	unsigned long entry_pc;
-};
-
-union sh_fpu_union {
-	struct sh_fpu_hard_struct hard;
-	struct sh_fpu_soft_struct soft;
-};
-
-struct thread_struct {
-	/* Saved registers when thread is descheduled */
-	unsigned long sp;
-	unsigned long pc;
-
-	/* Hardware debugging registers */
-	unsigned long ubc_pc;
-
-	/* floating point info */
-	union sh_fpu_union fpu;
-};
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-/* Count of active tasks with UBC settings */
-extern int ubc_usercnt;
-
-#define INIT_THREAD  {						\
-	.sp = sizeof(init_stack) + (long) &init_stack,		\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(regs, new_pc, new_sp)	 \
-	set_fs(USER_DS);			 \
-	regs->pr = 0;				 \
-	regs->sr = SR_FD;	/* User mode. */ \
-	regs->pc = new_pc;			 \
-	regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm)	do { } while(0)
-#define release_segments(mm)	do { } while(0)
-
-/*
- * FPU lazy state save handling.
- */
-
-static __inline__ void disable_fpu(void)
-{
-	unsigned long __dummy;
-
-	/* Set FD flag in SR */
-	__asm__ __volatile__("stc	sr, %0\n\t"
-			     "or	%1, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&r" (__dummy)
-			     : "r" (SR_FD));
-}
-
-static __inline__ void enable_fpu(void)
-{
-	unsigned long __dummy;
-
-	/* Clear out FD flag in SR */
-	__asm__ __volatile__("stc	sr, %0\n\t"
-			     "and	%1, %0\n\t"
-			     "ldc	%0, sr"
-			     : "=&r" (__dummy)
-			     : "r" (~SR_FD));
-}
-
-/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
-#define FPSCR_INIT  0x00080000
-
-#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
-#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)	(tsk->thread.pc)
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
-		struct pt_regs *regs);
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
-#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
-
-#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax()	barrier()
-
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
-    defined(CONFIG_CPU_SH4)
-#define PREFETCH_STRIDE		L1_CACHE_BYTES
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-static inline void prefetch(void *x)
-{
-	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
-}
-
-#define prefetchw(x)	prefetch(x)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h
deleted file mode 100644
index 88a2edf8fa5d..000000000000
--- a/include/asm-sh/processor_64.h
+++ /dev/null
@@ -1,279 +0,0 @@
-#ifndef __ASM_SH_PROCESSOR_64_H
-#define __ASM_SH_PROCESSOR_64_H
-
-/*
- * include/asm-sh/processor_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/cache.h>
-#include <asm/ptrace.h>
-#include <asm/cpu/registers.h>
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ \
-void *pc; \
-unsigned long long __dummy = 0; \
-__asm__("gettr	tr0, %1\n\t" \
-	"pta	4, tr0\n\t" \
-	"gettr	tr0, %0\n\t" \
-	"ptabs	%1, tr0\n\t"	\
-	:"=r" (pc), "=r" (__dummy) \
-	: "1" (__dummy)); \
-pc; })
-
-/*
- * TLB information structure
- *
- * Defined for both I and D tlb, per-processor.
- */
-struct tlb_info {
-	unsigned long long next;
-	unsigned long long first;
-	unsigned long long last;
-
-	unsigned int entries;
-	unsigned int step;
-
-	unsigned long flags;
-};
-
-struct sh_cpuinfo {
-	enum cpu_type type;
-	unsigned long loops_per_jiffy;
-	unsigned long asid_cache;
-
-	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-
-	/* Cache info */
-	struct cache_info icache;
-	struct cache_info dcache;
-	struct cache_info scache;
-
-	/* TLB info */
-	struct tlb_info itlb;
-	struct tlb_info dtlb;
-
-	unsigned long flags;
-};
-
-extern struct sh_cpuinfo cpu_data[];
-#define boot_cpu_data cpu_data[0]
-#define current_cpu_data cpu_data[smp_processor_id()]
-#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
-
-#endif
-
-/*
- * User space process size: 2GB - 4k.
- */
-#define TASK_SIZE	0x7ffff000UL
-
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
-
-/*
- * Bit of SR register
- *
- * FD-bit:
- *     When it's set, it means the processor doesn't have right to use FPU,
- *     and it results exception when the floating operation is executed.
- *
- * IMASK-bit:
- *     Interrupt level mask
- *
- * STEP-bit:
- *     Single step bit
- *
- */
-#if defined(CONFIG_SH64_SR_WATCH)
-#define SR_MMU   0x84000000
-#else
-#define SR_MMU   0x80000000
-#endif
-
-#define SR_IMASK 0x000000f0
-#define SR_FD    0x00008000
-#define SR_SSTEP 0x08000000
-
-#ifndef __ASSEMBLY__
-
-/*
- * FPU structure and data : require 8-byte alignment as we need to access it
-   with fld.p, fst.p
- */
-
-struct sh_fpu_hard_struct {
-	unsigned long fp_regs[64];
-	unsigned int fpscr;
-	/* long status; * software status information */
-};
-
-#if 0
-/* Dummy fpu emulator  */
-struct sh_fpu_soft_struct {
-	unsigned long long fp_regs[32];
-	unsigned int fpscr;
-	unsigned char lookahead;
-	unsigned long entry_pc;
-};
-#endif
-
-union sh_fpu_union {
-	struct sh_fpu_hard_struct hard;
-	/* 'hard' itself only produces 32 bit alignment, yet we need
-	   to access it using 64 bit load/store as well. */
-	unsigned long long alignment_dummy;
-};
-
-struct thread_struct {
-	unsigned long sp;
-	unsigned long pc;
-	/* This stores the address of the pt_regs built during a context
-	   switch, or of the register save area built for a kernel mode
-	   exception.  It is used for backtracing the stack of a sleeping task
-	   or one that traps in kernel mode. */
-        struct pt_regs *kregs;
-	/* This stores the address of the pt_regs constructed on entry from
-	   user mode.  It is a fixed value over the lifetime of a process, or
-	   NULL for a kernel thread. */
-	struct pt_regs *uregs;
-
-	unsigned long trap_no, error_code;
-	unsigned long address;
-	/* Hardware debugging registers may come here */
-
-	/* floating point info */
-	union sh_fpu_union fpu;
-};
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define INIT_MMAP \
-{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
-
-extern  struct pt_regs fake_swapper_regs;
-
-#define INIT_THREAD  {				\
-	.sp		= sizeof(init_stack) +	\
-			  (long) &init_stack,	\
-	.pc		= 0,			\
-        .kregs		= &fake_swapper_regs,	\
-	.uregs	        = NULL,			\
-	.trap_no	= 0,			\
-	.error_code	= 0,			\
-	.address	= 0,			\
-	.fpu		= { { { 0, } }, }	\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define SR_USER (SR_MMU | SR_FD)
-
-#define start_thread(regs, new_pc, new_sp)			\
-	set_fs(USER_DS);					\
-	regs->sr = SR_USER;	/* User mode. */		\
-	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
-	regs->pc |= 1;		/* Set SHmedia ! */		\
-	regs->regs[18] = 0;					\
-	regs->regs[15] = new_sp
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm)	do { } while (0)
-#define release_segments(mm)	do { } while (0)
-#define forget_segments()	do { } while (0)
-#define prepare_to_copy(tsk)	do { } while (0)
-/*
- * FPU lazy state save handling.
- */
-
-static inline void disable_fpu(void)
-{
-	unsigned long long __dummy;
-
-	/* Set FD flag in SR */
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "or	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy)
-			     : "r" (SR_FD));
-}
-
-static inline void enable_fpu(void)
-{
-	unsigned long long __dummy;
-
-	/* Clear out FD flag in SR */
-	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
-			     "and	%0, %1, %0\n\t"
-			     "putcon	%0, " __SR "\n\t"
-			     : "=&r" (__dummy)
-			     : "r" (~SR_FD));
-}
-
-/* Round to nearest, no exceptions on inexact, overflow, underflow,
-   zero-divide, invalid.  Configure option for whether to flush denorms to
-   zero, or except if a denorm is encountered.  */
-#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
-#define FPSCR_INIT  0x00040000
-#else
-#define FPSCR_INIT  0x00000000
-#endif
-
-#ifdef CONFIG_SH_FPU
-/* Initialise the FP state of a task */
-void fpinit(struct sh_fpu_hard_struct *fpregs);
-#else
-#define fpinit(fpregs)	do { } while (0)
-#endif
-
-extern struct task_struct *last_task_used_math;
-
-/*
- * Return saved PC of a blocked thread.
- */
-#define thread_saved_pc(tsk)	(tsk->thread.pc)
-
-extern unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
-
-#define cpu_relax()	barrier()
-
-#endif	/* __ASSEMBLY__ */
-#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h
deleted file mode 100644
index 8d6c92b3e770..000000000000
--- a/include/asm-sh/ptrace.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef __ASM_SH_PTRACE_H
-#define __ASM_SH_PTRACE_H
-
-/*
- * Copyright (C) 1999, 2000  Niibe Yutaka
- *
- */
-#if defined(__SH5__) || defined(CONFIG_SUPERH64)
-struct pt_regs {
-	unsigned long long pc;
-	unsigned long long sr;
-	unsigned long long syscall_nr;
-	unsigned long long regs[63];
-	unsigned long long tregs[8];
-	unsigned long long pad[2];
-};
-#else
-/*
- * GCC defines register number like this:
- * -----------------------------
- *	 0 - 15 are integer registers
- *	17 - 22 are control/special registers
- *	24 - 39 fp registers
- *	40 - 47 xd registers
- *	48 -    fpscr register
- * -----------------------------
- *
- * We follows above, except:
- *	16 --- program counter (PC)
- *	22 --- syscall #
- *	23 --- floating point communication register
- */
-#define REG_REG0	 0
-#define REG_REG15	15
-
-#define REG_PC		16
-
-#define REG_PR		17
-#define REG_SR		18
-#define REG_GBR		19
-#define REG_MACH	20
-#define REG_MACL	21
-
-#define REG_SYSCALL	22
-
-#define REG_FPREG0	23
-#define REG_FPREG15	38
-#define REG_XFREG0	39
-#define REG_XFREG15	54
-
-#define REG_FPSCR	55
-#define REG_FPUL	56
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_regs {
-	unsigned long regs[16];
-	unsigned long pc;
-	unsigned long pr;
-	unsigned long sr;
-	unsigned long gbr;
-	unsigned long mach;
-	unsigned long macl;
-	long tra;
-};
-
-/*
- * This struct defines the way the DSP registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_dspregs {
-	unsigned long	a1;
-	unsigned long	a0g;
-	unsigned long	a1g;
-	unsigned long	m0;
-	unsigned long	m1;
-	unsigned long	a0;
-	unsigned long	x0;
-	unsigned long	x1;
-	unsigned long	y0;
-	unsigned long	y1;
-	unsigned long	dsr;
-	unsigned long	rs;
-	unsigned long	re;
-	unsigned long	mod;
-};
-
-#define	PTRACE_GETDSPREGS	55
-#define	PTRACE_SETDSPREGS	56
-#endif
-
-#ifdef __KERNEL__
-#include <asm/addrspace.h>
-
-#define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
-#define instruction_pointer(regs)	((unsigned long)(regs)->pc)
-
-extern void show_regs(struct pt_regs *);
-
-#ifdef CONFIG_SH_DSP
-#define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
-#else
-#define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(unsigned long)) - 1)
-#endif
-
-static inline unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-#ifdef P2SEG
-	if (pc >= P2SEG && pc < P3SEG)
-		pc -= 0x20000000;
-#endif
-
-	return pc;
-}
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_PTRACE_H */
diff --git a/include/asm-sh/push-switch.h b/include/asm-sh/push-switch.h
deleted file mode 100644
index 4903f9e52dd8..000000000000
--- a/include/asm-sh/push-switch.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __ASM_SH_PUSH_SWITCH_H
-#define __ASM_SH_PUSH_SWITCH_H
-
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-struct push_switch {
-	/* switch state */
-	unsigned int		state:1;
-	/* debounce timer */
-	struct timer_list	debounce;
-	/* workqueue */
-	struct work_struct	work;
-	/* platform device, for workqueue handler */
-	struct platform_device	*pdev;
-};
-
-struct push_switch_platform_info {
-	/* IRQ handler */
-	irqreturn_t		(*irq_handler)(int irq, void *data);
-	/* Special IRQ flags */
-	unsigned int		irq_flags;
-	/* Bit location of switch */
-	unsigned int		bit;
-	/* Symbolic switch name */
-	const char		*name;
-};
-
-#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h
deleted file mode 100644
index 306f7359f7d4..000000000000
--- a/include/asm-sh/r7780rp.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/* Box specific addresses.  */
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR          0xa4000000      /* FPGA */
-#define PA_SDPOW	(-1)
-
-#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
-#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
-#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
-#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
-#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
-#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
-#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
-#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR          (PA_BCR+0x0900) /*  */
-
-#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
-#define IVDR_CK_ON	8		/* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7780RP)
-#define PA_POFF		(-1)
-
-#define PA_BCR		0xa5000000	/* FPGA */
-#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
-#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
-#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
-#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
-#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
-#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
-#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
-#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
-#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
-#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
-#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
-#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
-#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
-#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
-#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
-#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
-#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
-#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
-#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
-#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
-#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
-#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
-#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
-#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
-#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
-#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
-#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
-#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
-#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
-#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
-#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
-#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
-#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
-#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
-#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
-#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
-#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
-#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
-#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
-#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
-#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
-#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
-
-#define PA_AX88796L	0xa5800400	/* AX88796L Area */
-#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
-#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
-#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
-
-#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
-
-#define IVDR_CK_ON	8		/* iVDR Clock ON */
-
-#elif defined(CONFIG_SH_R7785RP)
-#define PA_BCR		0xa4000000	/* FPGA */
-#define PA_SDPOW	(-1)
-
-#define	PA_PCISCR	(PA_BCR+0x0000)
-#define PA_IRLPRA	(PA_BCR+0x0002)
-#define	PA_IRLPRB	(PA_BCR+0x0004)
-#define	PA_IRLPRC	(PA_BCR+0x0006)
-#define	PA_IRLPRD	(PA_BCR+0x0008)
-#define IRLCNTR1	(PA_BCR+0x0010)
-#define	PA_IRLPRE	(PA_BCR+0x000a)
-#define	PA_IRLPRF	(PA_BCR+0x000c)
-#define	PA_EXIRLCR	(PA_BCR+0x000e)
-#define	PA_IRLMCR1	(PA_BCR+0x0010)
-#define	PA_IRLMCR2	(PA_BCR+0x0012)
-#define	PA_IRLSSR1	(PA_BCR+0x0014)
-#define	PA_IRLSSR2	(PA_BCR+0x0016)
-#define PA_CFTCR	(PA_BCR+0x0100)
-#define PA_CFPCR	(PA_BCR+0x0102)
-#define PA_PCICR	(PA_BCR+0x0110)
-#define PA_IVDRCTL	(PA_BCR+0x0112)
-#define PA_IVDRSR	(PA_BCR+0x0114)
-#define PA_PDRSTCR	(PA_BCR+0x0116)
-#define PA_POFF		(PA_BCR+0x0120)
-#define PA_LCDCR	(PA_BCR+0x0130)
-#define PA_TPCR		(PA_BCR+0x0140)
-#define PA_TPCKCR	(PA_BCR+0x0142)
-#define PA_TPRSTR	(PA_BCR+0x0144)
-#define PA_TPXPDR	(PA_BCR+0x0146)
-#define PA_TPYPDR	(PA_BCR+0x0148)
-#define PA_GPIOPFR	(PA_BCR+0x0150)
-#define PA_GPIODR	(PA_BCR+0x0152)
-#define PA_OBLED	(PA_BCR+0x0154)
-#define PA_SWSR		(PA_BCR+0x0156)
-#define PA_VERREG	(PA_BCR+0x0158)
-#define PA_SMCR		(PA_BCR+0x0200)
-#define PA_SMSMADR	(PA_BCR+0x0202)
-#define PA_SMMR		(PA_BCR+0x0204)
-#define PA_SMSADR1	(PA_BCR+0x0206)
-#define PA_SMSADR32	(PA_BCR+0x0244)
-#define PA_SMTRDR1	(PA_BCR+0x0246)
-#define PA_SMTRDR16	(PA_BCR+0x0264)
-#define PA_CU3MDR	(PA_BCR+0x0300)
-#define PA_CU5MDR	(PA_BCR+0x0302)
-#define PA_MMSR		(PA_BCR+0x0400)
-
-#define IVDR_CK_ON	4		/* iVDR Clock ON */
-#endif
-
-#define HL_FPGA_IRQ_BASE	200
-#define HL_NR_IRL		15
-
-#define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
-#define IRQ_CF			(HL_FPGA_IRQ_BASE + 1)
-#define IRQ_PSW			(HL_FPGA_IRQ_BASE + 2)
-#define IRQ_EXT0		(HL_FPGA_IRQ_BASE + 3)
-#define IRQ_EXT1		(HL_FPGA_IRQ_BASE + 4)
-#define IRQ_EXT2		(HL_FPGA_IRQ_BASE + 5)
-#define IRQ_EXT3		(HL_FPGA_IRQ_BASE + 6)
-#define IRQ_EXT4		(HL_FPGA_IRQ_BASE + 7)
-#define IRQ_EXT5		(HL_FPGA_IRQ_BASE + 8)
-#define IRQ_EXT6		(HL_FPGA_IRQ_BASE + 9)
-#define IRQ_EXT7		(HL_FPGA_IRQ_BASE + 10)
-#define IRQ_SMBUS		(HL_FPGA_IRQ_BASE + 11)
-#define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
-#define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
-#define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
-#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
-#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
-
-unsigned char *highlander_plat_irq_setup(void);
-
-#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/include/asm-sh/resource.h b/include/asm-sh/resource.h
deleted file mode 100644
index 9c2499a86ec0..000000000000
--- a/include/asm-sh/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_RESOURCE_H
-#define __ASM_SH_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_SH_RESOURCE_H */
diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h
deleted file mode 100644
index ec45ba8e11d9..000000000000
--- a/include/asm-sh/rtc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-extern void (*board_time_init)(void);
-extern void (*rtc_sh_get_time)(struct timespec *);
-extern int (*rtc_sh_set_time)(const time_t);
-
-#define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
-
-struct sh_rtc_platform_info {
-	unsigned long capabilities;
-};
-
-#include <asm/cpu/rtc.h>
-
-#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h
deleted file mode 100644
index 0a800157b826..000000000000
--- a/include/asm-sh/rts7751r2d.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Board specific addresses.  */
-
-#define PA_BCR		0xa4000000	/* FPGA */
-#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
-#define PA_CFCTL	0xa4000004	/* CF Timing control */
-#define PA_CFPOW	0xa4000006	/* CF Power control */
-#define PA_DISPCTL	0xa4000008	/* Display Timing control */
-#define PA_SDMPOW	0xa400000a	/* SD Power control */
-#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
-#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
-#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
-
-#define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
-#define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
-#define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
-#define PA_R2D1_EXTRST		0xa4000028	/* Extention Reset control */
-#define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
-
-#define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
-#define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
-#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extention Reset control */
-#define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
-#define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
-
-#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
-#define PA_VERREG	0xa4000032	/* FPGA Version Register */
-#define PA_INPORT	0xa4000034	/* KEY Input Port control */
-#define PA_OUTPORT	0xa4000036	/* LED control */
-#define PA_BVERREG	0xa4000038	/* Board Revision Register */
-
-#define PA_AX88796L	0xaa000400	/* AX88796L Area */
-#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
-#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
-#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
-
-#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
-
-#define R2D_FPGA_IRQ_BASE	100
-
-#define IRQ_VOYAGER		(R2D_FPGA_IRQ_BASE + 0)
-#define IRQ_EXT			(R2D_FPGA_IRQ_BASE + 1)
-#define IRQ_TP			(R2D_FPGA_IRQ_BASE + 2)
-#define IRQ_RTC_T		(R2D_FPGA_IRQ_BASE + 3)
-#define IRQ_RTC_A		(R2D_FPGA_IRQ_BASE + 4)
-#define IRQ_SDCARD		(R2D_FPGA_IRQ_BASE + 5)
-#define IRQ_CF_CD		(R2D_FPGA_IRQ_BASE + 6)
-#define IRQ_CF_IDE		(R2D_FPGA_IRQ_BASE + 7)
-#define IRQ_AX88796		(R2D_FPGA_IRQ_BASE + 8)
-#define IRQ_KEY			(R2D_FPGA_IRQ_BASE + 9)
-#define IRQ_PCI_INTA		(R2D_FPGA_IRQ_BASE + 10)
-#define IRQ_PCI_INTB		(R2D_FPGA_IRQ_BASE + 11)
-#define IRQ_PCI_INTC		(R2D_FPGA_IRQ_BASE + 12)
-#define IRQ_PCI_INTD		(R2D_FPGA_IRQ_BASE + 13)
-
-/* arch/sh/boards/renesas/rts7751r2d/irq.c */
-void init_rts7751r2d_IRQ(void);
-int rts7751r2d_irq_demux(int);
-
-#endif  /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h
deleted file mode 100644
index 1987f3ea7f1b..000000000000
--- a/include/asm-sh/rwsem.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff
- * in lib/rwsem.c.
- */
-
-#ifndef _ASM_SH_RWSEM_H
-#define _ASM_SH_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
-#endif
-
-#ifdef __KERNEL__
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
-/*
- * the semaphore definition
- */
-struct rw_semaphore {
-	long		count;
-#define RWSEM_UNLOCKED_VALUE		0x00000000
-#define RWSEM_ACTIVE_BIAS		0x00000001
-#define RWSEM_ACTIVE_MASK		0x0000ffff
-#define RWSEM_WAITING_BIAS		(-0x00010000)
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
-	  LIST_HEAD_INIT((name).wait_list) \
-	  __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name)		\
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-			 struct lock_class_key *key);
-
-#define init_rwsem(sem)				\
-do {						\
-	static struct lock_class_key __key;	\
-						\
-	__init_rwsem((sem), #sem, &__key);	\
-} while (0)
-
-static inline void init_rwsem(struct rw_semaphore *sem)
-{
-	sem->count = RWSEM_UNLOCKED_VALUE;
-	spin_lock_init(&sem->wait_lock);
-	INIT_LIST_HEAD(&sem->wait_list);
-}
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
-	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
-		smp_wmb();
-	else
-		rwsem_down_read_failed(sem);
-}
-
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	while ((tmp = sem->count) >= 0) {
-		if (tmp == cmpxchg(&sem->count, tmp,
-				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
-			smp_wmb();
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
-				(atomic_t *)(&sem->count));
-	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
-		smp_wmb();
-	else
-		rwsem_down_write_failed(sem);
-}
-
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
-		      RWSEM_ACTIVE_WRITE_BIAS);
-	smp_wmb();
-	return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	smp_wmb();
-	tmp = atomic_dec_return((atomic_t *)(&sem->count));
-	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
-		rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
-	smp_wmb();
-	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
-			      (atomic_t *)(&sem->count)) < 0)
-		rwsem_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
-	atomic_add(delta, (atomic_t *)(&sem->count));
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
-	int tmp;
-
-	smp_wmb();
-	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
-	if (tmp < 0)
-		rwsem_downgrade_wake(sem);
-}
-
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	__down_write(sem);
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
-	smp_mb();
-	return atomic_add_return(delta, (atomic_t *)(&sem->count));
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_SH_RWSEM_H */
diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h
deleted file mode 100644
index 2084d0373693..000000000000
--- a/include/asm-sh/scatterlist.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_SH_SCATTERLIST_H
-#define __ASM_SH_SCATTERLIST_H
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-    unsigned long sg_magic;
-#endif
-    unsigned long page_link;
-    unsigned int offset;/* for highmem, page offset */
-    dma_addr_t dma_address;
-    unsigned int length;
-};
-
-#define ISA_DMA_THRESHOLD	PHYS_ADDR_MASK
-
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
-#endif /* !(__ASM_SH_SCATTERLIST_H) */
diff --git a/include/asm-sh/sdk7780.h b/include/asm-sh/sdk7780.h
deleted file mode 100644
index 697dc865f21b..000000000000
--- a/include/asm-sh/sdk7780.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef __ASM_SH_RENESAS_SDK7780_H
-#define __ASM_SH_RENESAS_SDK7780_H
-
-/*
- * linux/include/asm-sh/sdk7780.h
- *
- * Renesas Solutions SH7780 SDK Support
- * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/addrspace.h>
-
-/* Box specific addresses.  */
-#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
-#define PA_ROM			0xa0000000	/* EPROM */
-#define PA_ROM_SIZE		0x00400000	/* EPROM size 4M byte */
-#define PA_FROM			0xa0800000	/* Flash-ROM */
-#define PA_FROM_SIZE	0x00400000	/* Flash-ROM size 4M byte */
-#define PA_EXT1			0xa4000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_SDRAM		0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE	0x08000000
-
-#define PA_EXT4			0xb0000000
-#define PA_EXT4_SIZE	0x04000000
-#define PA_EXT_USER		PA_EXT4		/* User Expansion Space */
-
-#define PA_PERIPHERAL	PA_AREA5_IO
-
-/* SRAM/Reserved */
-#define PA_RESERVED	(PA_PERIPHERAL + 0)
-/* FPGA base address */
-#define PA_FPGA		(PA_PERIPHERAL + 0x01000000)
-/* SMC LAN91C111 */
-#define PA_LAN		(PA_PERIPHERAL + 0x01800000)
-
-
-#define FPGA_SRSTR      (PA_FPGA + 0x000)	/* System reset */
-#define FPGA_IRQ0SR     (PA_FPGA + 0x010)	/* IRQ0 status */
-#define FPGA_IRQ0MR     (PA_FPGA + 0x020)	/* IRQ0 mask */
-#define FPGA_BDMR       (PA_FPGA + 0x030)	/* Board operating mode */
-#define FPGA_INTT0PRTR  (PA_FPGA + 0x040)	/* Interrupt test mode0 port */
-#define FPGA_INTT0SELR  (PA_FPGA + 0x050)	/* Int. test mode0 select */
-#define FPGA_INTT1POLR  (PA_FPGA + 0x060)	/* Int. test mode0 polarity */
-#define FPGA_NMIR       (PA_FPGA + 0x070)	/* NMI source */
-#define FPGA_NMIMR      (PA_FPGA + 0x080)	/* NMI mask */
-#define FPGA_IRQR       (PA_FPGA + 0x090)	/* IRQX source */
-#define FPGA_IRQMR      (PA_FPGA + 0x0A0)	/* IRQX mask */
-#define FPGA_SLEDR      (PA_FPGA + 0x0B0)	/* LED control */
-#define PA_LED			FPGA_SLEDR
-#define FPGA_MAPSWR     (PA_FPGA + 0x0C0)	/* Map switch */
-#define FPGA_FPVERR     (PA_FPGA + 0x0D0)	/* FPGA version */
-#define FPGA_FPDATER    (PA_FPGA + 0x0E0)	/* FPGA date */
-#define FPGA_RSE        (PA_FPGA + 0x100)	/* Reset source */
-#define FPGA_EASR       (PA_FPGA + 0x110)	/* External area select */
-#define FPGA_SPER       (PA_FPGA + 0x120)	/* Serial port enable */
-#define FPGA_IMSR       (PA_FPGA + 0x130)	/* Interrupt mode select */
-#define FPGA_PCIMR      (PA_FPGA + 0x140)	/* PCI Mode */
-#define FPGA_DIPSWMR    (PA_FPGA + 0x150)	/* DIPSW monitor */
-#define FPGA_FPODR      (PA_FPGA + 0x160)	/* Output port data */
-#define FPGA_ATAESR     (PA_FPGA + 0x170)	/* ATA extended bus status */
-#define FPGA_IRQPOLR    (PA_FPGA + 0x180)	/* IRQx polarity */
-
-
-#define SDK7780_NR_IRL			15
-/* IDE/ATA interrupt */
-#define IRQ_CFCARD				14
-/* SMC interrupt */
-#define IRQ_ETHERNET			6
-
-
-/* arch/sh/boards/renesas/sdk7780/irq.c */
-void init_sdk7780_IRQ(void);
-
-#define __IO_PREFIX		sdk7780
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h
deleted file mode 100644
index bd2596c014a9..000000000000
--- a/include/asm-sh/se.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_HITACHI_SE_H
-#define __ASM_SH_HITACHI_SE_H
-
-/*
- * linux/include/asm-sh/hitachi_se.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
- */
-
-/* Box specific addresses.  */
-
-#define PA_ROM		0x00000000	/* EPROM */
-#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_FROM		0x01000000	/* EPROM */
-#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_EXT1		0x04000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_EXT2		0x08000000
-#define PA_EXT2_SIZE	0x04000000
-#define PA_SDRAM	0x0c000000
-#define PA_SDRAM_SIZE	0x04000000
-
-#define PA_EXT4		0x12000000
-#define PA_EXT4_SIZE	0x02000000
-#define PA_EXT5		0x14000000
-#define PA_EXT5_SIZE	0x04000000
-#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
-
-#define PA_83902	0xb0000000	/* DP83902A */
-#define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
-#define PA_83902_RST	0xb0080000	/* DP83902A reset port */
-
-#define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
-#define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
-#define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
-#define PA_LED		0xb0c00000	/* LED */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define PA_BCR		0xb0e00000
-#else
-#define PA_BCR		0xb1400000	/* FPGA */
-#endif
-
-#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA	(PA_BCR + 0)
-#define BCR_ILCRB	(PA_BCR + 2)
-#define BCR_ILCRC	(PA_BCR + 4)
-#define BCR_ILCRD	(PA_BCR + 6)
-#define BCR_ILCRE	(PA_BCR + 8)
-#define BCR_ILCRF	(PA_BCR + 10)
-#define BCR_ILCRG	(PA_BCR + 12)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC	12
-#define IRQ_CFCARD	14
-#else
-#define IRQ_STNIC	10
-#define IRQ_CFCARD	7
-#endif
-
-#define __IO_PREFIX	se
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/include/asm-sh/se7206.h b/include/asm-sh/se7206.h
deleted file mode 100644
index 698eb80389ab..000000000000
--- a/include/asm-sh/se7206.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_SH_SE7206_H
-#define __ASM_SH_SE7206_H
-
-#define PA_SMSC		0x30000000
-#define PA_MRSHPC	0x34000000
-#define PA_LED		0x31400000
-
-void init_se7206_IRQ(void);
-
-#define __IO_PREFIX	se7206
-#include <asm/io_generic.h>
-
-#endif /* __ASM_SH_SE7206_H */
diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h
deleted file mode 100644
index e7914a54aa96..000000000000
--- a/include/asm-sh/se7343.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_SH_HITACHI_SE7343_H
-#define __ASM_SH_HITACHI_SE7343_H
-
-/*
- * include/asm-sh/se/se7343.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7343 support
- */
-
-/* Box specific addresses.  */
-
-/* Area 0 */
-#define PA_ROM		0x00000000	/* EPROM */
-#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
-#define PA_FROM		0x00400000	/* Flash ROM */
-#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
-#define PA_SRAM		0x00800000	/* SRAM */
-#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
-/* Area 1 */
-#define PA_EXT1		0x04000000
-#define PA_EXT1_SIZE	0x04000000
-/* Area 2 */
-#define PA_EXT2		0x08000000
-#define PA_EXT2_SIZE	0x04000000
-/* Area 3 */
-#define PA_SDRAM	0x0c000000
-#define PA_SDRAM_SIZE	0x04000000
-/* Area 4 */
-#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-#define PA_LED		0xb0C00000	/* LED */
-#define LED_SHIFT       0
-#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
-#define PA_CPLD_MODESET	0xb1400004	/* CPLD Mode set register */
-#define PA_CPLD_ST	0xb1400008	/* CPLD Interrupt status register */
-#define PA_CPLD_IMSK	0xb140000a	/* CPLD Interrupt mask register */
-/* Area 5 */
-#define PA_EXT5		0x14000000
-#define PA_EXT5_SIZE	0x04000000
-/* Area 6 */
-#define PA_LCD1		0xb8000000
-#define PA_LCD2		0xb8800000
-
-#define __IO_PREFIX	sh7343se
-#include <asm/io_generic.h>
-
-/* External Multiplexed interrupts */
-#define PC_IRQ0		OFFCHIP_IRQ_BASE
-#define PC_IRQ1		(PC_IRQ0 + 1)
-#define PC_IRQ2		(PC_IRQ1 + 1)
-#define PC_IRQ3		(PC_IRQ2 + 1)
-
-#define EXT_IRQ0	(PC_IRQ3 + 1)
-#define EXT_IRQ1	(EXT_IRQ0 + 1)
-#define EXT_IRQ2	(EXT_IRQ1 + 1)
-#define EXT_IRQ3	(EXT_IRQ2 + 1)
-
-#define USB_IRQ0	(EXT_IRQ3 + 1)
-#define USB_IRQ1	(USB_IRQ0 + 1)
-
-#define UART_IRQ0	(USB_IRQ1 + 1)
-#define UART_IRQ1	(UART_IRQ0 + 1)
-
-#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/include/asm-sh/se7721.h b/include/asm-sh/se7721.h
deleted file mode 100644
index b957f6041193..000000000000
--- a/include/asm-sh/se7721.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#ifndef __ASM_SH_SE7721_H
-#define __ASM_SH_SE7721_H
-#include <asm/addrspace.h>
-
-/* Box specific addresses. */
-#define SE_AREA0_WIDTH	2		/* Area0: 32bit */
-#define PA_ROM		0xa0000000	/* EPROM */
-#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
-#define PA_FROM		0xa1000000	/* Flash-ROM */
-#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
-#define PA_EXT1		0xa4000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_SDRAM	0xaC000000	/* SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE	0x04000000
-
-#define PA_EXT4		0xb0000000
-#define PA_EXT4_SIZE	0x04000000
-
-#define PA_PERIPHERAL	0xB8000000
-
-#define PA_PCIC		PA_PERIPHERAL
-#define PA_MRSHPC	(PA_PERIPHERAL + 0x003fffe0)
-#define PA_MRSHPC_MW1	(PA_PERIPHERAL + 0x00400000)
-#define PA_MRSHPC_MW2	(PA_PERIPHERAL + 0x00500000)
-#define PA_MRSHPC_IO	(PA_PERIPHERAL + 0x00600000)
-#define MRSHPC_OPTION	(PA_MRSHPC + 6)
-#define MRSHPC_CSR	(PA_MRSHPC + 8)
-#define MRSHPC_ISR	(PA_MRSHPC + 10)
-#define MRSHPC_ICR	(PA_MRSHPC + 12)
-#define MRSHPC_CPWCR	(PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1	(PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1	(PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1	(PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2	(PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2	(PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2	(PA_MRSHPC + 26)
-#define MRSHPC_CDCR	(PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO	(PA_MRSHPC + 30)
-
-#define PA_LED		0xB6800000	/* 8bit LED */
-#define PA_FPGA		0xB7000000 	/* FPGA base address */
-
-#define MRSHPC_IRQ0	10
-
-#define FPGA_ILSR1	(PA_FPGA + 0x02)
-#define FPGA_ILSR2	(PA_FPGA + 0x03)
-#define FPGA_ILSR3	(PA_FPGA + 0x04)
-#define FPGA_ILSR4	(PA_FPGA + 0x05)
-#define FPGA_ILSR5	(PA_FPGA + 0x06)
-#define FPGA_ILSR6	(PA_FPGA + 0x07)
-#define FPGA_ILSR7	(PA_FPGA + 0x08)
-#define FPGA_ILSR8	(PA_FPGA + 0x09)
-
-void init_se7721_IRQ(void);
-
-#define __IO_PREFIX		se7721
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_SE7721_H */
diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h
deleted file mode 100644
index 3690fe5857a4..000000000000
--- a/include/asm-sh/se7722.h
+++ /dev/null
@@ -1,116 +0,0 @@
-#ifndef __ASM_SH_SE7722_H
-#define __ASM_SH_SE7722_H
-
-/*
- * linux/include/asm-sh/se7722.h
- *
- * Copyright (C) 2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* Box specific addresses.  */
-#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
-#define PA_ROM		0xa0000000	/* EPROM */
-#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
-#define PA_FROM		0xa1000000	/* Flash-ROM */
-#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
-#define PA_EXT1		0xa4000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_SDRAM	0xaC000000	/* DDR-SDRAM(Area3) 64MB */
-#define PA_SDRAM_SIZE	0x04000000
-
-#define PA_EXT4		0xb0000000
-#define PA_EXT4_SIZE	0x04000000
-
-#define PA_PERIPHERAL	0xB0000000
-
-#define PA_PCIC         PA_PERIPHERAL   		/* MR-SHPC-01 PCMCIA */
-#define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO    (PA_PERIPHERAL + 0x00600000)    /* MR-SHPC-01 I/O window base */
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define PA_LED		(PA_PERIPHERAL + 0x00800000)	/* 8bit LED */
-#define PA_FPGA		(PA_PERIPHERAL + 0x01800000) 	/* FPGA base address */
-
-#define PA_LAN		(PA_AREA6_IO + 0)		/* SMC LAN91C111 */
-/* GPIO */
-#define MSTPCR0         0xA4150030UL
-#define MSTPCR1         0xA4150034UL
-#define MSTPCR2         0xA4150038UL
-
-#define FPGA_IN         0xb1840000UL
-#define FPGA_OUT        0xb1840004UL
-
-#define PORT_PECR       0xA4050108UL
-#define PORT_PJCR       0xA4050110UL
-#define PORT_PSELD      0xA4050154UL
-#define PORT_PSELB      0xA4050150UL
-
-#define PORT_PSELC      0xA4050152UL
-#define PORT_PKCR       0xA4050112UL
-#define PORT_PHCR       0xA405010EUL
-#define PORT_PLCR       0xA4050114UL
-#define PORT_PMCR       0xA4050116UL
-#define PORT_PRCR       0xA405011CUL
-#define PORT_PXCR       0xA4050148UL
-#define PORT_PSELA      0xA405014EUL
-#define PORT_PYCR       0xA405014AUL
-#define PORT_PZCR       0xA405014CUL
-#define PORT_HIZCRA     0xA4050158UL
-#define PORT_HIZCRC     0xA405015CUL
-
-/* IRQ */
-#define IRQ0_IRQ        32
-#define IRQ1_IRQ        33
-
-#define IRQ01_MODE      0xb1800000
-#define IRQ01_STS       0xb1800004
-#define IRQ01_MASK      0xb1800008
-
-/* Bits in IRQ01_* registers */
-
-#define SE7722_FPGA_IRQ_USB	0 /* IRQ0 */
-#define SE7722_FPGA_IRQ_SMC	1 /* IRQ0 */
-#define SE7722_FPGA_IRQ_MRSHPC0	2 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC1	3 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC2	4 /* IRQ1 */
-#define SE7722_FPGA_IRQ_MRSHPC3	5 /* IRQ1 */
-
-#define SE7722_FPGA_IRQ_NR	6
-#define SE7722_FPGA_IRQ_BASE	110
-
-#define MRSHPC_IRQ3    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3)
-#define MRSHPC_IRQ2    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2)
-#define MRSHPC_IRQ1    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1)
-#define MRSHPC_IRQ0    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0)
-#define SMC_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC)
-#define USB_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB)
-
-/* arch/sh/boards/se/7722/irq.c */
-void init_se7722_IRQ(void);
-
-#define __IO_PREFIX		se7722
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_SE7722_H */
diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h
deleted file mode 100644
index b36792ac5d66..000000000000
--- a/include/asm-sh/se7751.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef __ASM_SH_HITACHI_7751SE_H
-#define __ASM_SH_HITACHI_7751SE_H
-
-/*
- * linux/include/asm-sh/hitachi_7751se.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine support
-
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-/* Box specific addresses.  */
-
-#define PA_ROM		0x00000000	/* EPROM */
-#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_FROM		0x01000000	/* EPROM */
-#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_EXT1		0x04000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_EXT2		0x08000000
-#define PA_EXT2_SIZE	0x04000000
-#define PA_SDRAM	0x0c000000
-#define PA_SDRAM_SIZE	0x04000000
-
-#define PA_EXT4		0x12000000
-#define PA_EXT4_SIZE	0x02000000
-#define PA_EXT5		0x14000000
-#define PA_EXT5_SIZE	0x04000000
-#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
-#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
-#define PA_LED		0xba000000	/* LED */
-#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE     (PA_MRSHPC + 4)
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA	(PA_BCR + 0)
-#define BCR_ILCRB	(PA_BCR + 2)
-#define BCR_ILCRC	(PA_BCR + 4)
-#define BCR_ILCRD	(PA_BCR + 6)
-#define BCR_ILCRE	(PA_BCR + 8)
-#define BCR_ILCRF	(PA_BCR + 10)
-#define BCR_ILCRG	(PA_BCR + 12)
-
-#define IRQ_79C973	13
-
-void init_7751se_IRQ(void);
-
-#define __IO_PREFIX	sh7751se
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/include/asm-sh/se7780.h b/include/asm-sh/se7780.h
deleted file mode 100644
index 40e9b41458cd..000000000000
--- a/include/asm-sh/se7780.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __ASM_SH_SE7780_H
-#define __ASM_SH_SE7780_H
-
-/*
- * linux/include/asm-sh/se7780.h
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/addrspace.h>
-
-/* Box specific addresses.  */
-#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
-#define PA_ROM		0xa0000000	/* EPROM */
-#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_FROM		0xa1000000	/* Flash-ROM */
-#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
-#define PA_EXT1		0xa4000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_SM501	PA_EXT1		/* Graphic IC (SM501) */
-#define PA_SM501_SIZE	PA_EXT1_SIZE	/* Graphic IC (SM501) */
-#define PA_SDRAM	0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
-#define PA_SDRAM_SIZE	0x08000000
-
-#define PA_EXT4		0xb0000000
-#define PA_EXT4_SIZE	0x04000000
-#define PA_EXT_FLASH	PA_EXT4		/* Expansion Flash-ROM */
-
-#define PA_PERIPHERAL	PA_AREA6_IO	/* SW6-6=ON */
-
-#define PA_LAN		(PA_PERIPHERAL + 0)		/* SMC LAN91C111 */
-#define PA_LED_DISP	(PA_PERIPHERAL + 0x02000000)	/* 8words LED Display */
-#define DISP_CHAR_RAM	(7 << 3)
-#define DISP_SEL0_ADDR	(DISP_CHAR_RAM + 0)
-#define DISP_SEL1_ADDR	(DISP_CHAR_RAM + 1)
-#define DISP_SEL2_ADDR	(DISP_CHAR_RAM + 2)
-#define DISP_SEL3_ADDR	(DISP_CHAR_RAM + 3)
-#define DISP_SEL4_ADDR	(DISP_CHAR_RAM + 4)
-#define DISP_SEL5_ADDR	(DISP_CHAR_RAM + 5)
-#define DISP_SEL6_ADDR	(DISP_CHAR_RAM + 6)
-#define DISP_SEL7_ADDR	(DISP_CHAR_RAM + 7)
-
-#define DISP_UDC_RAM	(5 << 3)
-#define PA_FPGA		(PA_PERIPHERAL + 0x03000000) /* FPGA base address */
-
-/* FPGA register address and bit */
-#define FPGA_SFTRST		(PA_FPGA + 0)	/* Soft reset register */
-#define FPGA_INTMSK1		(PA_FPGA + 2)	/* Interrupt Mask register 1 */
-#define FPGA_INTMSK2		(PA_FPGA + 4)	/* Interrupt Mask register 2 */
-#define FPGA_INTSEL1		(PA_FPGA + 6)	/* Interrupt select register 1 */
-#define FPGA_INTSEL2		(PA_FPGA + 8)	/* Interrupt select register 2 */
-#define FPGA_INTSEL3		(PA_FPGA + 10)	/* Interrupt select register 3 */
-#define FPGA_PCI_INTSEL1	(PA_FPGA + 12)	/* PCI Interrupt select register 1 */
-#define FPGA_PCI_INTSEL2	(PA_FPGA + 14)	/* PCI Interrupt select register 2 */
-#define FPGA_INTSET		(PA_FPGA + 16)	/* IRQ/IRL select register */
-#define FPGA_INTSTS1		(PA_FPGA + 18)	/* Interrupt status register 1 */
-#define FPGA_INTSTS2		(PA_FPGA + 20)	/* Interrupt status register 2 */
-#define FPGA_REQSEL		(PA_FPGA + 22)	/* REQ/GNT select register */
-#define FPGA_DBG_LED		(PA_FPGA + 32)	/* Debug LED(D-LED[8:1] */
-#define PA_LED			FPGA_DBG_LED
-#define FPGA_IVDRID		(PA_FPGA + 36)	/* iVDR ID Register */
-#define FPGA_IVDRPW		(PA_FPGA + 38)	/* iVDR Power ON Register */
-#define FPGA_MMCID		(PA_FPGA + 40)	/* MMC ID Register */
-
-/* FPGA INTSEL position */
-/* INTSEL1 */
-#define IRQPOS_SMC91CX          (0 * 4)
-#define IRQPOS_SM501            (1 * 4)
-/* INTSEL2 */
-#define IRQPOS_EXTINT1          (0 * 4)
-#define IRQPOS_EXTINT2          (1 * 4)
-#define IRQPOS_EXTINT3          (2 * 4)
-#define IRQPOS_EXTINT4          (3 * 4)
-/* INTSEL3 */
-#define IRQPOS_PCCPW            (0 * 4)
-
-/* IDE interrupt */
-#define IRQ_IDE0                67 /* iVDR */
-
-/* SMC interrupt */
-#define SMC_IRQ                 8
-
-/* SM501 interrupt */
-#define SM501_IRQ               0
-
-/* interrupt pin */
-#define IRQPIN_EXTINT1          0 /* IRQ0 pin */
-#define IRQPIN_EXTINT2          1 /* IRQ1 pin */
-#define IRQPIN_EXTINT3          2 /* IRQ2 pin */
-#define IRQPIN_SMC91CX          3 /* IRQ3 pin */
-#define IRQPIN_EXTINT4          4 /* IRQ4 pin */
-#define IRQPIN_PCC0             5 /* IRQ5 pin */
-#define IRQPIN_PCC2             6 /* IRQ6 pin */
-#define IRQPIN_SM501            7 /* IRQ7 pin */
-#define IRQPIN_PCCPW            7 /* IRQ7 pin */
-
-/* arch/sh/boards/se/7780/irq.c */
-void init_se7780_IRQ(void);
-
-#define __IO_PREFIX		se7780
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_SE7780_H */
diff --git a/include/asm-sh/sections.h b/include/asm-sh/sections.h
deleted file mode 100644
index 8f8f4ad400df..000000000000
--- a/include/asm-sh/sections.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_SH_SECTIONS_H
-#define __ASM_SH_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-extern long __machvec_start, __machvec_end;
-extern char __uncached_start, __uncached_end;
-extern char _ebss[];
-
-#endif /* __ASM_SH_SECTIONS_H */
-
diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h
deleted file mode 100644
index e417eab4c7d7..000000000000
--- a/include/asm-sh/segment.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SEGMENT_H
-#define __ASM_SH_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif /* __ASM_SH_SEGMENT_H */
diff --git a/include/asm-sh/semaphore.h b/include/asm-sh/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-sh/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-sh/sembuf.h b/include/asm-sh/sembuf.h
deleted file mode 100644
index d79f3bd570b2..000000000000
--- a/include/asm-sh/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_SH_SEMBUF_H
-#define __ASM_SH_SEMBUF_H
-
-/* 
- * The semid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __ASM_SH_SEMBUF_H */
diff --git a/include/asm-sh/serial.h b/include/asm-sh/serial.h
deleted file mode 100644
index 21f6d330f189..000000000000
--- a/include/asm-sh/serial.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-sh/serial.h
- *
- * Configuration details for 8250, 16450, 16550, etc. serial ports
- */
-
-#ifndef _ASM_SERIAL_H
-#define _ASM_SERIAL_H
-
-#include <linux/kernel.h>
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#ifdef CONFIG_HD64465
-#include <asm/hd64465.h>
-
-#define SERIAL_PORT_DFNS                   \
-        /* UART CLK   PORT IRQ     FLAGS        */                      \
-        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
-
-#else
-
-#define SERIAL_PORT_DFNS
-
-#endif
-
-#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h
deleted file mode 100644
index 55a2bd328d99..000000000000
--- a/include/asm-sh/setup.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _SH_SETUP_H
-#define _SH_SETUP_H
-
-#define COMMAND_LINE_SIZE 256
-
-#ifdef __KERNEL__
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM	((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
-int setup_early_printk(char *);
-void sh_mv_setup(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _SH_SETUP_H */
diff --git a/include/asm-sh/sfp-machine.h b/include/asm-sh/sfp-machine.h
deleted file mode 100644
index d3c548443f2a..000000000000
--- a/include/asm-sh/sfp-machine.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Machine-dependent software floating-point definitions.
-   SuperH kernel version.
-   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Richard Henderson (rth@cygnus.com),
-		  Jakub Jelinek (jj@ultra.linux.cz),
-		  David S. Miller (davem@redhat.com) and
-		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If
-   not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-
-#define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
-
-#define _FP_MUL_MEAT_S(R,X,Y)					\
-  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y)					\
-  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y)					\
-  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
-#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
-#define _FP_NANSIGN_S		0
-#define _FP_NANSIGN_D		0
-#define _FP_NANSIGN_Q		0
-
-#define _FP_KEEPNANFRACP 1
-
-/*
- * If one NaN is signaling and the other is not,
- * we choose that one, otherwise we choose X.
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
-  do {                                                          \
-    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
-        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
-      {                                                         \
-        R##_s = Y##_s;                                          \
-        _FP_FRAC_COPY_##wc(R,Y);                                \
-      }                                                         \
-    else                                                        \
-      {                                                         \
-        R##_s = X##_s;                                          \
-        _FP_FRAC_COPY_##wc(R,X);                                \
-      }                                                         \
-    R##_c = FP_CLS_NAN;                                         \
-  } while (0)
-
-//#define FP_ROUNDMODE		FPSCR_RM
-#define FP_DENORM_ZERO		1/*FPSCR_DN*/
-
-/* Exception flags. */
-#define FP_EX_INVALID		(1<<4)
-#define FP_EX_DIVZERO		(1<<3)
-#define FP_EX_OVERFLOW		(1<<2)
-#define FP_EX_UNDERFLOW		(1<<1)
-#define FP_EX_INEXACT		(1<<0)
-
-#endif
-
diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h
deleted file mode 100644
index c39c785bba94..000000000000
--- a/include/asm-sh/sh03/io.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-sh/sh03/io.h
- *
- * Copyright 2004 Interface Co.,Ltd. Saito.K
- *
- * IO functions for an Interface CTP/PCI-SH03
- */
-
-#ifndef _ASM_SH_IO_SH03_H
-#define _ASM_SH_IO_SH03_H
-
-#include <linux/time.h>
-
-#define IRL0_IRQ	2
-#define IRL0_PRIORITY	13
-#define IRL1_IRQ	5
-#define IRL1_PRIORITY	10
-#define IRL2_IRQ	8
-#define IRL2_PRIORITY	7
-#define IRL3_IRQ	11
-#define IRL3_PRIORITY	4
-
-void heartbeat_sh03(void);
-
-#endif /* _ASM_SH_IO_SH03_H */
diff --git a/include/asm-sh/sh03/sh03.h b/include/asm-sh/sh03/sh03.h
deleted file mode 100644
index 19c40b80428d..000000000000
--- a/include/asm-sh/sh03/sh03.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_SH_SH03_H
-#define __ASM_SH_SH03_H
-
-/*
- * linux/include/asm-sh/sh03/sh03.h
- *
- * Copyright (C) 2004  Interface Co., Ltd. Saito.K
- *
- * Interface CTP/PCI-SH03 support
- */
-
-#define PA_PCI_IO       (0xbe240000)    /* PCI I/O space */
-#define PA_PCI_MEM      (0xbd000000)    /* PCI MEM space */
-
-#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
-#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
-
-#endif  /* __ASM_SH_SH03_H */
diff --git a/include/asm-sh/sh_bios.h b/include/asm-sh/sh_bios.h
deleted file mode 100644
index 0ca261956e3d..000000000000
--- a/include/asm-sh/sh_bios.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __ASM_SH_BIOS_H
-#define __ASM_SH_BIOS_H
-
-/*
- * Copyright (C) 2000 Greg Banks, Mitch Davis
- * C API to interface to the standard LinuxSH BIOS
- * usually from within the early stages of kernel boot.
- */
-
-
-extern void sh_bios_console_write(const char *buf, unsigned int len);
-extern void sh_bios_char_out(char ch);
-extern int sh_bios_in_gdb_mode(void);
-extern void sh_bios_gdb_detach(void);
-
-extern void sh_bios_get_node_addr(unsigned char *node_addr);
-extern void sh_bios_shutdown(unsigned int how);
-
-#endif /* __ASM_SH_BIOS_H */
diff --git a/include/asm-sh/sh_keysc.h b/include/asm-sh/sh_keysc.h
deleted file mode 100644
index b5a4dd5a9729..000000000000
--- a/include/asm-sh/sh_keysc.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_KEYSC_H__
-#define __ASM_KEYSC_H__
-
-#define SH_KEYSC_MAXKEYS 30
-
-struct sh_keysc_info {
-	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
-	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
-	int delay;
-	int keycodes[SH_KEYSC_MAXKEYS];
-};
-
-#endif /* __ASM_KEYSC_H__ */
diff --git a/include/asm-sh/shmbuf.h b/include/asm-sh/shmbuf.h
deleted file mode 100644
index b2101f490521..000000000000
--- a/include/asm-sh/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __ASM_SH_SHMBUF_H
-#define __ASM_SH_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for i386 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __ASM_SH_SHMBUF_H */
diff --git a/include/asm-sh/shmin.h b/include/asm-sh/shmin.h
deleted file mode 100644
index 36ba138a81fb..000000000000
--- a/include/asm-sh/shmin.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_SH_SHMIN_H
-#define __ASM_SH_SHMIN_H
-
-#define SHMIN_IO_BASE 0xb0000000UL
-
-#define SHMIN_NE_IRQ IRQ2_IRQ
-#define SHMIN_NE_BASE 0x300
-
-#endif
diff --git a/include/asm-sh/shmparam.h b/include/asm-sh/shmparam.h
deleted file mode 100644
index ba1758d90106..000000000000
--- a/include/asm-sh/shmparam.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-sh/shmparam.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_SHMPARAM_H
-#define __ASM_SH_SHMPARAM_H
-
-/*
- * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
- * for everyone, and work out the specifics from the probed cache descriptor.
- */
-#define	SHMLBA	0x4000		 /* attach addr a multiple of this */
-
-#define __ARCH_FORCE_SHMLBA
-
-#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/include/asm-sh/sigcontext.h b/include/asm-sh/sigcontext.h
deleted file mode 100644
index 8ce1435bc0bf..000000000000
--- a/include/asm-sh/sigcontext.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef __ASM_SH_SIGCONTEXT_H
-#define __ASM_SH_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-	/* CPU registers */
-	unsigned long long sc_regs[63];
-	unsigned long long sc_tregs[8];
-	unsigned long long sc_pc;
-	unsigned long long sc_sr;
-
-	/* FPU registers */
-	unsigned long long sc_fpregs[32];
-	unsigned int sc_fpscr;
-	unsigned int sc_fpvalid;
-#else
-	/* CPU registers */
-	unsigned long sc_regs[16];
-	unsigned long sc_pc;
-	unsigned long sc_pr;
-	unsigned long sc_sr;
-	unsigned long sc_gbr;
-	unsigned long sc_mach;
-	unsigned long sc_macl;
-
-#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \
-    defined(__SH2A__) || defined(CONFIG_CPU_SH2A)
-	/* FPU registers */
-	unsigned long sc_fpregs[16];
-	unsigned long sc_xfpregs[16];
-	unsigned int sc_fpscr;
-	unsigned int sc_fpul;
-	unsigned int sc_ownedfp;
-#endif
-#endif
-};
-
-#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/include/asm-sh/siginfo.h b/include/asm-sh/siginfo.h
deleted file mode 100644
index 813040ed68a9..000000000000
--- a/include/asm-sh/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SIGINFO_H
-#define __ASM_SH_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __ASM_SH_SIGINFO_H */
diff --git a/include/asm-sh/signal.h b/include/asm-sh/signal.h
deleted file mode 100644
index 5c5c1e852089..000000000000
--- a/include/asm-sh/signal.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef __ASM_SH_SIGNAL_H
-#define __ASM_SH_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct pt_regs;
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_SIGNAL_H */
diff --git a/include/asm-sh/smc37c93x.h b/include/asm-sh/smc37c93x.h
deleted file mode 100644
index 585da2a8fc45..000000000000
--- a/include/asm-sh/smc37c93x.h
+++ /dev/null
@@ -1,190 +0,0 @@
-#ifndef __ASM_SH_SMC37C93X_H
-#define __ASM_SH_SMC37C93X_H
-
-/*
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE	0x3f0
-#define IDE1_PRIMARY_BASE	0x1f0
-#define IDE1_SECONDARY_BASE	0x170
-#define PARPORT_PRIMARY_BASE	0x378
-#define COM1_PRIMARY_BASE	0x2f8
-#define COM2_PRIMARY_BASE	0x3f8
-#define RTC_PRIMARY_BASE	0x070
-#define KBC_PRIMARY_BASE	0x060
-#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
-
-/* Logical device number */
-#define LDN_FDC			0
-#define LDN_IDE1		1
-#define LDN_IDE2		2
-#define LDN_PARPORT		3
-#define LDN_COM1		4
-#define LDN_COM2		5
-#define LDN_RTC			6
-#define LDN_KBC			7
-#define LDN_AUXIO		8
-
-/* Configuration port and key */
-#define CONFIG_PORT		0x3f0
-#define INDEX_PORT		CONFIG_PORT
-#define DATA_PORT		0x3f1
-#define CONFIG_ENTER		0x55
-#define CONFIG_EXIT		0xaa
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX	0x07
-#define POWER_CONTROL_INDEX	0x22
-#define ACTIVATE_INDEX		0x30
-#define IO_BASE_HI_INDEX	0x60
-#define IO_BASE_LO_INDEX	0x61
-#define IRQ_SELECT_INDEX	0x70
-#define DMA_SELECT_INDEX	0x74
-
-#define GPIO46_INDEX		0xc6
-#define GPIO47_INDEX		0xc7
-
-/* UART stuff. Only for debugging.  */
-/* UART Register */
-
-#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
-#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
-#define UART_IER	0x2	/* Interrupt Enable Register */
-#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
-#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
-#define UART_LCR	0x6	/* Line Control Register */
-#define UART_MCR	0x8	/* MODEM Control Register */
-#define UART_LSR	0xa	/* Line Status Register */
-#define UART_MSR	0xc	/* MODEM Status Register */
-#define UART_SCR	0xe	/* Scratch Register */
-#define UART_DLL	0x0	/* Divisor Latch (LS) */
-#define UART_DLM	0x2	/* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
-	volatile __u16 rbr;
-	volatile __u16 ier;
-	volatile __u16 iir;
-	volatile __u16 lcr;
-	volatile __u16 mcr;
-	volatile __u16 lsr;
-	volatile __u16 msr;
-	volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr	rbr
-#define tcr	iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll	rbr
-#define dlm	ier
-#define fcr	iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
-#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
-#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
-#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
-#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
-#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
-#define IIR_FIFO	0xc000	/* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN		0x0100	/* FIFO enable */
-#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
-#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
-#define FCR_DMA		0x0800	/* DMA mode select */
-#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
-#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
-#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
-#define LCR_STB		0x0400	/* Number of Stop Bits */
-#define LCR_PEN		0x0800	/* Parity Enable */
-#define LCR_EPS		0x1000	/* Even Parity Select */
-#define LCR_SP		0x2000	/* Stick Parity */
-#define LCR_SB		0x4000	/* Set Break */
-#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR		0x0100	/* Data Terminal Ready */
-#define MCR_RTS		0x0200	/* Request to Send */
-#define MCR_OUT1	0x0400	/* Out 1 */
-#define MCR_IRQEN	0x0800	/* IRQ Enable */
-#define MCR_LOOP	0x1000	/* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR		0x0100	/* Data Ready */
-#define LSR_OE		0x0200	/* Overrun Error */
-#define LSR_PE		0x0400	/* Parity Error */
-#define LSR_FE		0x0800	/* Framing Error */
-#define LSR_BI		0x1000	/* Break Interrupt */
-#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
-#define LSR_TEMT	0x4000	/* Transmitter Empty */
-#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS	0x0100	/* Delta Clear to Send */
-#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
-#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
-#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
-#define MSR_CTS		0x1000	/* Clear to Send */
-#define MSR_DSR		0x2000	/* Data Set Ready */
-#define MSR_RI		0x4000	/* Ring Indicator */
-#define MSR_DCD		0x8000	/* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK	(1843200)	/* 1.8432 MHz */
-#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS             0
-#define RTC_SECONDS_ALARM       1
-#define RTC_MINUTES             2
-#define RTC_MINUTES_ALARM       3
-#define RTC_HOURS               4
-#define RTC_HOURS_ALARM         5
-#define RTC_DAY_OF_WEEK         6
-#define RTC_DAY_OF_MONTH        7
-#define RTC_MONTH               8
-#define RTC_YEAR                9
-#define RTC_FREQ_SELECT		10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only.  */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL     	11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif  /* __ASM_SH_SMC37C93X_H */
diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h
deleted file mode 100644
index 593343cd26ee..000000000000
--- a/include/asm-sh/smp.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef __ASM_SH_SMP_H
-#define __ASM_SH_SMP_H
-
-#include <linux/bitops.h>
-#include <linux/cpumask.h>
-
-#ifdef CONFIG_SMP
-
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/current.h>
-
-#define raw_smp_processor_id()	(current_thread_info()->cpu)
-#define hard_smp_processor_id()	plat_smp_processor_id()
-
-/* Map from cpu id to sequential logical cpu number. */
-extern int __cpu_number_map[NR_CPUS];
-#define cpu_number_map(cpu)  __cpu_number_map[cpu]
-
-/* The reverse map from sequential logical cpu number to cpu id.  */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
-
-/* I've no idea what the real meaning of this is */
-#define PROC_CHANGE_PENALTY	20
-
-#define NO_PROC_ID	(-1)
-
-#define SMP_MSG_FUNCTION	0
-#define SMP_MSG_RESCHEDULE	1
-#define SMP_MSG_FUNCTION_SINGLE	2
-#define SMP_MSG_NR		3
-
-void plat_smp_setup(void);
-void plat_prepare_cpus(unsigned int max_cpus);
-int plat_smp_processor_id(void);
-void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
-void plat_send_ipi(unsigned int cpu, unsigned int message);
-int plat_register_ipi_handler(unsigned int message,
-			      void (*handler)(void *), void *arg);
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-#else
-
-#define hard_smp_processor_id()	(0)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_SMP_H */
diff --git a/include/asm-sh/snapgear.h b/include/asm-sh/snapgear.h
deleted file mode 100644
index 042d95f51c4d..000000000000
--- a/include/asm-sh/snapgear.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * include/asm-sh/snapgear.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#if defined(CONFIG_CPU_SH4)
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt.  In fact the priority
- * is the interrupt :-)
- */
-
-#define IRL0_IRQ	2
-#define IRL0_PRIORITY	13
-
-#define IRL1_IRQ	5
-#define IRL1_PRIORITY	10
-
-#define IRL2_IRQ	8
-#define IRL2_PRIORITY	7
-
-#define IRL3_IRQ	11
-#define IRL3_PRIORITY	4
-#endif
-
-#define __IO_PREFIX	snapgear
-#include <asm/io_generic.h>
-
-#ifdef CONFIG_SH_SECUREEDGE5410
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit        Read                   Write
- * -----------------------------------------------
- * D0         DCD on ttySC1          power
- * D1         Reset Switch           heatbeat
- * D2         ttySC0 CTS (7100)      LAN
- * D3         -                      WAN
- * D4         ttySC0 DCD (7100)      CONSOLE
- * D5         -                      ONLINE
- * D6         -                      VPN
- * D7         -                      DTR on ttySC1
- * D8         -                      ttySC0 RTS (7100)
- * D9         -                      ttySC0 DTR (7100)
- * D10        -                      RTC SCLK
- * D11        RTC DATA               RTC DATA
- * D12        -                      RTS RESET
- */
-
-#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
-extern unsigned short secureedge5410_ioport;
-
-#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
-	 (secureedge5410_ioport = \
-			((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
-#define SECUREEDGE_READ_IOPORT() \
-	 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-#endif
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/include/asm-sh/socket.h b/include/asm-sh/socket.h
deleted file mode 100644
index 6d4bf6512959..000000000000
--- a/include/asm-sh/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __ASM_SH_SOCKET_H
-#define __ASM_SH_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_RCVBUFFORCE	32
-#define SO_SNDBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* __ASM_SH_SOCKET_H */
diff --git a/include/asm-sh/sockios.h b/include/asm-sh/sockios.h
deleted file mode 100644
index cf8b96b1f9ab..000000000000
--- a/include/asm-sh/sockios.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_SH_SOCKIOS_H
-#define __ASM_SH_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOGETOWN	_IOR('f', 123, int)
-#define FIOSETOWN 	_IOW('f', 124, int)
-
-#define SIOCATMARK	_IOR('s', 7, int)
-#define SIOCSPGRP	_IOW('s', 8, pid_t)
-#define SIOCGPGRP	_IOR('s', 9, pid_t)
-
-#define SIOCGSTAMP	_IOR('s', 100, struct timeval) /* Get stamp (timeval) */
-#define SIOCGSTAMPNS	_IOR('s', 101, struct timespec) /* Get stamp (timespec) */
-#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/include/asm-sh/sparsemem.h b/include/asm-sh/sparsemem.h
deleted file mode 100644
index 547a540b6667..000000000000
--- a/include/asm-sh/sparsemem.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_SH_SPARSEMEM_H
-#define __ASM_SH_SPARSEMEM_H
-
-#ifdef __KERNEL__
-/*
- * SECTION_SIZE_BITS		2^N: how big each section will be
- * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
- * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
- */
-#define SECTION_SIZE_BITS	26
-#define MAX_PHYSADDR_BITS	32
-#define MAX_PHYSMEM_BITS	32
-
-#endif
-
-#endif /* __ASM_SH_SPARSEMEM_H */
diff --git a/include/asm-sh/spi.h b/include/asm-sh/spi.h
deleted file mode 100644
index e96f5b0953c8..000000000000
--- a/include/asm-sh/spi.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_SPI_H__
-#define __ASM_SPI_H__
-
-struct sh_spi_info;
-
-struct sh_spi_info {
-	int			 bus_num;
-	int			 num_chipselect;
-
-	void (*chip_select)(struct sh_spi_info *spi, int cs, int state);
-};
-
-#endif /* __ASM_SPI_H__ */
diff --git a/include/asm-sh/spinlock.h b/include/asm-sh/spinlock.h
deleted file mode 100644
index e793181d64da..000000000000
--- a/include/asm-sh/spinlock.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * include/asm-sh/spinlock.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- * Copyright (C) 2006, 2007 Akio Idehara
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_SPINLOCK_H
-#define __ASM_SH_SPINLOCK_H
-
-/*
- * The only locking implemented here uses SH-4A opcodes. For others,
- * split this out as per atomic-*.h.
- */
-#ifndef CONFIG_CPU_SH4A
-#error "Need movli.l/movco.l for spinlocks"
-#endif
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-#define __raw_spin_is_locked(x)		((x)->lock <= 0)
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-#define __raw_spin_unlock_wait(x) \
-	do { cpu_relax(); } while ((x)->lock)
-
-/*
- * Simple spin lock operations.  There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions.  They have a cost.
- */
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-	unsigned long tmp;
-	unsigned long oldval;
-
-	__asm__ __volatile__ (
-		"1:						\n\t"
-		"movli.l	@%2, %0	! __raw_spin_lock	\n\t"
-		"mov		%0, %1				\n\t"
-		"mov		#0, %0				\n\t"
-		"movco.l	%0, @%2				\n\t"
-		"bf		1b				\n\t"
-		"cmp/pl		%1				\n\t"
-		"bf		1b				\n\t"
-		: "=&z" (tmp), "=&r" (oldval)
-		: "r" (&lock->lock)
-		: "t", "memory"
-	);
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-		"mov		#1, %0 ! __raw_spin_unlock	\n\t"
-		"mov.l		%0, @%1				\n\t"
-		: "=&z" (tmp)
-		: "r" (&lock->lock)
-		: "t", "memory"
-	);
-}
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-	unsigned long tmp, oldval;
-
-	__asm__ __volatile__ (
-		"1:						\n\t"
-		"movli.l	@%2, %0	! __raw_spin_trylock	\n\t"
-		"mov		%0, %1				\n\t"
-		"mov		#0, %0				\n\t"
-		"movco.l	%0, @%2				\n\t"
-		"bf		1b				\n\t"
-		"synco						\n\t"
-		: "=&z" (tmp), "=&r" (oldval)
-		: "r" (&lock->lock)
-		: "t", "memory"
-	);
-
-	return oldval;
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts but no interrupt
- * writers. For those circumstances we can "mix" irq-safe locks - any writer
- * needs to get a irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-/**
- * read_can_lock - would read_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define __raw_read_can_lock(x)	((x)->lock > 0)
-
-/**
- * write_can_lock - would write_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define __raw_write_can_lock(x)	((x)->lock == RW_LOCK_BIAS)
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-		"1:						\n\t"
-		"movli.l	@%1, %0	! __raw_read_lock	\n\t"
-		"cmp/pl		%0				\n\t"
-		"bf		1b				\n\t"
-		"add		#-1, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
-		"bf		1b				\n\t"
-		: "=&z" (tmp)
-		: "r" (&rw->lock)
-		: "t", "memory"
-	);
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-		"1:						\n\t"
-		"movli.l	@%1, %0	! __raw_read_unlock	\n\t"
-		"add		#1, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
-		"bf		1b				\n\t"
-		: "=&z" (tmp)
-		: "r" (&rw->lock)
-		: "t", "memory"
-	);
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-		"1:						\n\t"
-		"movli.l	@%1, %0	! __raw_write_lock	\n\t"
-		"cmp/hs		%2, %0				\n\t"
-		"bf		1b				\n\t"
-		"sub		%2, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
-		"bf		1b				\n\t"
-		: "=&z" (tmp)
-		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
-		: "t", "memory"
-	);
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
-	__asm__ __volatile__ (
-		"mov.l		%1, @%0 ! __raw_write_unlock	\n\t"
-		:
-		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
-		: "t", "memory"
-	);
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *rw)
-{
-	unsigned long tmp, oldval;
-
-	__asm__ __volatile__ (
-		"1:						\n\t"
-		"movli.l	@%2, %0	! __raw_read_trylock	\n\t"
-		"mov		%0, %1				\n\t"
-		"cmp/pl		%0				\n\t"
-		"bf		2f				\n\t"
-		"add		#-1, %0				\n\t"
-		"movco.l	%0, @%2				\n\t"
-		"bf		1b				\n\t"
-		"2:						\n\t"
-		"synco						\n\t"
-		: "=&z" (tmp), "=&r" (oldval)
-		: "r" (&rw->lock)
-		: "t", "memory"
-	);
-
-	return (oldval > 0);
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
-{
-	unsigned long tmp, oldval;
-
-	__asm__ __volatile__ (
-		"1:						\n\t"
-		"movli.l	@%2, %0	! __raw_write_trylock	\n\t"
-		"mov		%0, %1				\n\t"
-		"cmp/hs		%3, %0				\n\t"
-		"bf		2f				\n\t"
-		"sub		%3, %0				\n\t"
-		"2:						\n\t"
-		"movco.l	%0, @%2				\n\t"
-		"bf		1b				\n\t"
-		"synco						\n\t"
-		: "=&z" (tmp), "=&r" (oldval)
-		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
-		: "t", "memory"
-	);
-
-	return (oldval > (RW_LOCK_BIAS - 1));
-}
-
-#define _raw_spin_relax(lock)	cpu_relax()
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
-
-#endif /* __ASM_SH_SPINLOCK_H */
diff --git a/include/asm-sh/spinlock_types.h b/include/asm-sh/spinlock_types.h
deleted file mode 100644
index b4d244e7b60c..000000000000
--- a/include/asm-sh/spinlock_types.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_SH_SPINLOCK_TYPES_H
-#define __ASM_SH_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED		{ 1 }
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_rwlock_t;
-
-#define RW_LOCK_BIAS			0x01000000
-#define __RAW_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
-
-#endif
diff --git a/include/asm-sh/stat.h b/include/asm-sh/stat.h
deleted file mode 100644
index e1810cc6e3da..000000000000
--- a/include/asm-sh/stat.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ASM_SH_STAT_H
-#define __ASM_SH_STAT_H
-
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-struct stat {
-	unsigned short st_dev;
-	unsigned short __pad1;
-	unsigned long st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned short __pad2;
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-	unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-	unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-	unsigned short	st_dev;
-	unsigned char	__pad0[10];
-
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned short	st_rdev;
-	unsigned char	__pad3[10];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
-	unsigned long	__pad4;		/* future possible st_blocks high bits */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;	/* will be high 32 bits of ctime someday */
-
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-#else
-struct stat {
-	unsigned long  st_dev;
-	unsigned long  st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned long  st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-	unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-	unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char	__pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-	unsigned long	__st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char	__pad3[4];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long long	st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long	st_ino;
-};
-
-#define STAT_HAVE_NSEC 1
-#endif
-
-#endif /* __ASM_SH_STAT_H */
diff --git a/include/asm-sh/statfs.h b/include/asm-sh/statfs.h
deleted file mode 100644
index 9202a023328f..000000000000
--- a/include/asm-sh/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_STATFS_H
-#define __ASM_SH_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_SH_STATFS_H */
diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h
deleted file mode 100644
index 8c1ea21dc0ae..000000000000
--- a/include/asm-sh/string.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_SUPERH32
-# include "string_32.h"
-#else
-# include "string_64.h"
-#endif
diff --git a/include/asm-sh/string_32.h b/include/asm-sh/string_32.h
deleted file mode 100644
index 55f8db6bc1d7..000000000000
--- a/include/asm-sh/string_32.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef __ASM_SH_STRING_H
-#define __ASM_SH_STRING_H
-
-#ifdef __KERNEL__
-
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * But consider these trivial functions to be public domain.
- */
-
-#define __HAVE_ARCH_STRCPY
-static inline char *strcpy(char *__dest, const char *__src)
-{
-	register char *__xdest = __dest;
-	unsigned long __dummy;
-
-	__asm__ __volatile__("1:\n\t"
-			     "mov.b	@%1+, %2\n\t"
-			     "mov.b	%2, @%0\n\t"
-			     "cmp/eq	#0, %2\n\t"
-			     "bf/s	1b\n\t"
-			     " add	#1, %0\n\t"
-			     : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
-			     : "0" (__dest), "1" (__src)
-			     : "memory", "t");
-
-	return __xdest;
-}
-
-#define __HAVE_ARCH_STRNCPY
-static inline char *strncpy(char *__dest, const char *__src, size_t __n)
-{
-	register char *__xdest = __dest;
-	unsigned long __dummy;
-
-	if (__n == 0)
-		return __xdest;
-
-	__asm__ __volatile__(
-		"1:\n"
-		"mov.b	@%1+, %2\n\t"
-		"mov.b	%2, @%0\n\t"
-		"cmp/eq	#0, %2\n\t"
-		"bt/s	2f\n\t"
-		" cmp/eq	%5,%1\n\t"
-		"bf/s	1b\n\t"
-		" add	#1, %0\n"
-		"2:"
-		: "=r" (__dest), "=r" (__src), "=&z" (__dummy)
-		: "0" (__dest), "1" (__src), "r" (__src+__n)
-		: "memory", "t");
-
-	return __xdest;
-}
-
-#define __HAVE_ARCH_STRCMP
-static inline int strcmp(const char *__cs, const char *__ct)
-{
-	register int __res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"mov.b	@%1+, %3\n"
-		"1:\n\t"
-		"mov.b	@%0+, %2\n\t"
-		"cmp/eq #0, %3\n\t"
-		"bt	2f\n\t"
-		"cmp/eq %2, %3\n\t"
-		"bt/s	1b\n\t"
-		" mov.b	@%1+, %3\n\t"
-		"add	#-2, %1\n\t"
-		"mov.b	@%1, %3\n\t"
-		"sub	%3, %2\n"
-		"2:"
-		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
-		: "0" (__cs), "1" (__ct)
-		: "t");
-
-	return __res;
-}
-
-#define __HAVE_ARCH_STRNCMP
-static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
-{
-	register int __res;
-	unsigned long __dummy;
-
-	if (__n == 0)
-		return 0;
-
-	__asm__ __volatile__(
-		"mov.b	@%1+, %3\n"
-		"1:\n\t"
-		"mov.b	@%0+, %2\n\t"
-		"cmp/eq %6, %0\n\t"
-		"bt/s	2f\n\t"
-		" cmp/eq #0, %3\n\t"
-		"bt/s	3f\n\t"
-		" cmp/eq %3, %2\n\t"
-		"bt/s	1b\n\t"
-		" mov.b	@%1+, %3\n\t"
-		"add	#-2, %1\n\t"
-		"mov.b	@%1, %3\n"
-		"2:\n\t"
-		"sub	%3, %2\n"
-		"3:"
-		:"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
-		: "0" (__cs), "1" (__ct), "r" (__cs+__n)
-		: "t");
-
-	return __res;
-}
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *__s, int __c, size_t __n);
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *);
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_STRING_H */
diff --git a/include/asm-sh/string_64.h b/include/asm-sh/string_64.h
deleted file mode 100644
index aa1fef229c78..000000000000
--- a/include/asm-sh/string_64.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_SH_STRING_64_H
-#define __ASM_SH_STRING_64_H
-
-/*
- * include/asm-sh/string_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *dest, const void *src, size_t count);
-
-#endif /* __ASM_SH_STRING_64_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
deleted file mode 100644
index e65b6b822cb3..000000000000
--- a/include/asm-sh/system.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_SH_SYSTEM_H
-#define __ASM_SH_SYSTEM_H
-
-/*
- * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
- * Copyright (C) 2002 Paul Mundt
- */
-
-#include <linux/irqflags.h>
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <asm/types.h>
-#include <asm/ptrace.h>
-
-#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
-
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define __icbi()			\
-{					\
-	unsigned long __addr;		\
-	__addr = 0xa8000000;		\
-	__asm__ __volatile__(		\
-		"icbi   %0\n\t"		\
-		: /* no output */	\
-		: "m" (__m(__addr)));	\
-}
-#endif
-
-/*
- * A brief note on ctrl_barrier(), the control register write barrier.
- *
- * Legacy SH cores typically require a sequence of 8 nops after
- * modification of a control register in order for the changes to take
- * effect. On newer cores (like the sh4a and sh5) this is accomplished
- * with icbi.
- *
- * Also note that on sh4a in the icbi case we can forego a synco for the
- * write barrier, as it's not necessary for control registers.
- *
- * Historically we have only done this type of barrier for the MMUCR, but
- * it's also necessary for the CCR, so we make it generic here instead.
- */
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define mb()		__asm__ __volatile__ ("synco": : :"memory")
-#define rmb()		mb()
-#define wmb()		__asm__ __volatile__ ("synco": : :"memory")
-#define ctrl_barrier()	__icbi()
-#define read_barrier_depends()	do { } while(0)
-#else
-#define mb()		__asm__ __volatile__ ("": : :"memory")
-#define rmb()		mb()
-#define wmb()		__asm__ __volatile__ ("": : :"memory")
-#define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
-#define read_barrier_depends()	do { } while(0)
-#endif
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-
-#ifdef CONFIG_GUSA_RB
-#include <asm/cmpxchg-grb.h>
-#else
-#include <asm/cmpxchg-irq.h>
-#endif
-
-extern void __xchg_called_with_bad_pointer(void);
-
-#define __xchg(ptr, x, size)				\
-({							\
-	unsigned long __xchg__res;			\
-	volatile void *__xchg_ptr = (ptr);		\
-	switch (size) {					\
-	case 4:						\
-		__xchg__res = xchg_u32(__xchg_ptr, x);	\
-		break;					\
-	case 1:						\
-		__xchg__res = xchg_u8(__xchg_ptr, x);	\
-		break;					\
-	default:					\
-		__xchg_called_with_bad_pointer();	\
-		__xchg__res = x;			\
-		break;					\
-	}						\
-							\
-	__xchg__res;					\
-})
-
-#define xchg(ptr,x)	\
-	((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
-
-/* This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
-		unsigned long new, int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32(ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#define cmpxchg(ptr,o,n)						 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
-
-extern void *set_exception_table_vec(unsigned int vec, void *handler);
-
-static inline void *set_exception_table_evt(unsigned int evt, void *handler)
-{
-	return set_exception_table_vec(evt >> 5, handler);
-}
-
-/*
- * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
- */
-#ifdef CONFIG_CPU_SH2A
-extern unsigned int instruction_size(unsigned int insn);
-#elif defined(CONFIG_SUPERH32)
-#define instruction_size(insn)	(2)
-#else
-#define instruction_size(insn)	(4)
-#endif
-
-extern unsigned long cached_to_uncached;
-
-extern struct dentry *sh_debugfs_root;
-
-/* XXX
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-void disable_hlt(void);
-void enable_hlt(void);
-
-void default_idle(void);
-void per_cpu_trap_init(void);
-
-asmlinkage void break_point_trap(void);
-
-#ifdef CONFIG_SUPERH32
-#define BUILD_TRAP_HANDLER(name)					\
-asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5,	\
-				    unsigned long r6, unsigned long r7,	\
-				    struct pt_regs __regs)
-
-#define TRAP_HANDLER_DECL				\
-	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);	\
-	unsigned int vec = regs->tra;			\
-	(void)vec;
-#else
-#define BUILD_TRAP_HANDLER(name)	\
-asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
-#define TRAP_HANDLER_DECL
-#endif
-
-BUILD_TRAP_HANDLER(address_error);
-BUILD_TRAP_HANDLER(debug);
-BUILD_TRAP_HANDLER(bug);
-BUILD_TRAP_HANDLER(fpu_error);
-BUILD_TRAP_HANDLER(fpu_state_restore);
-
-#define arch_align_stack(x) (x)
-
-struct mem_access {
-	unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
-	unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
-};
-
-#ifdef CONFIG_SUPERH32
-# include "system_32.h"
-#else
-# include "system_64.h"
-#endif
-
-#endif
diff --git a/include/asm-sh/system_32.h b/include/asm-sh/system_32.h
deleted file mode 100644
index f11bcf0855ed..000000000000
--- a/include/asm-sh/system_32.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef __ASM_SH_SYSTEM_32_H
-#define __ASM_SH_SYSTEM_32_H
-
-#include <linux/types.h>
-
-struct task_struct *__switch_to(struct task_struct *prev,
-				struct task_struct *next);
-
-/*
- *	switch_to() should switch tasks to task nr n, first
- */
-#define switch_to(prev, next, last)					\
-do {									\
-	register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp;	\
-	register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc;	\
-	register u32 *__ts4 __asm__ ("r4") = (u32 *)prev;		\
-	register u32 *__ts5 __asm__ ("r5") = (u32 *)next;		\
-	register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp;	\
-	register u32 __ts7 __asm__ ("r7") = next->thread.pc;		\
-	struct task_struct *__last;					\
-									\
-	__asm__ __volatile__ (						\
-		".balign 4\n\t"						\
-		"stc.l	gbr, @-r15\n\t"					\
-		"sts.l	pr, @-r15\n\t"					\
-		"mov.l	r8, @-r15\n\t"					\
-		"mov.l	r9, @-r15\n\t"					\
-		"mov.l	r10, @-r15\n\t"					\
-		"mov.l	r11, @-r15\n\t"					\
-		"mov.l	r12, @-r15\n\t"					\
-		"mov.l	r13, @-r15\n\t"					\
-		"mov.l	r14, @-r15\n\t"					\
-		"mov.l	r15, @r1\t! save SP\n\t"			\
-		"mov.l	@r6, r15\t! change to new stack\n\t"		\
-		"mova	1f, %0\n\t"					\
-		"mov.l	%0, @r2\t! save PC\n\t"				\
-		"mov.l	2f, %0\n\t"					\
-		"jmp	@%0\t! call __switch_to\n\t"			\
-		" lds	r7, pr\t!  with return to new PC\n\t"		\
-		".balign	4\n"					\
-		"2:\n\t"						\
-		".long	__switch_to\n"					\
-		"1:\n\t"						\
-		"mov.l	@r15+, r14\n\t"					\
-		"mov.l	@r15+, r13\n\t"					\
-		"mov.l	@r15+, r12\n\t"					\
-		"mov.l	@r15+, r11\n\t"					\
-		"mov.l	@r15+, r10\n\t"					\
-		"mov.l	@r15+, r9\n\t"					\
-		"mov.l	@r15+, r8\n\t"					\
-		"lds.l	@r15+, pr\n\t"					\
-		"ldc.l	@r15+, gbr\n\t"					\
-		: "=z" (__last)						\
-		: "r" (__ts1), "r" (__ts2), "r" (__ts4),		\
-		  "r" (__ts5), "r" (__ts6), "r" (__ts7)			\
-		: "r3", "t");						\
-									\
-	last = __last;							\
-} while (0)
-
-#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text")))
-
-/*
- * Jump to uncached area.
- * When handling TLB or caches, we need to do it from an uncached area.
- */
-#define jump_to_uncached()			\
-do {						\
-	unsigned long __dummy;			\
-						\
-	__asm__ __volatile__(			\
-		"mova	1f, %0\n\t"		\
-		"add	%1, %0\n\t"		\
-		"jmp	@%0\n\t"		\
-		" nop\n\t"			\
-		".balign 4\n"			\
-		"1:"				\
-		: "=&z" (__dummy)		\
-		: "r" (cached_to_uncached));	\
-} while (0)
-
-/*
- * Back to cached area.
- */
-#define back_to_cached()				\
-do {							\
-	unsigned long __dummy;				\
-	ctrl_barrier();					\
-	__asm__ __volatile__(				\
-		"mov.l	1f, %0\n\t"			\
-		"jmp	@%0\n\t"			\
-		" nop\n\t"				\
-		".balign 4\n"				\
-		"1:	.long 2f\n"			\
-		"2:"					\
-		: "=&r" (__dummy));			\
-} while (0)
-
-int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
-			    struct mem_access *ma);
-
-#endif /* __ASM_SH_SYSTEM_32_H */
diff --git a/include/asm-sh/system_64.h b/include/asm-sh/system_64.h
deleted file mode 100644
index 943acf5ea07c..000000000000
--- a/include/asm-sh/system_64.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef __ASM_SH_SYSTEM_64_H
-#define __ASM_SH_SYSTEM_64_H
-
-/*
- * include/asm-sh/system_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- * Copyright (C) 2004  Richard Curnow
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/processor.h>
-
-/*
- *	switch_to() should switch tasks to task nr n, first
- */
-struct task_struct *sh64_switch_to(struct task_struct *prev,
-				   struct thread_struct *prev_thread,
-				   struct task_struct *next,
-				   struct thread_struct *next_thread);
-
-#define switch_to(prev,next,last)				\
-do {								\
-	if (last_task_used_math != next) {			\
-		struct pt_regs *regs = next->thread.uregs;	\
-		if (regs) regs->sr |= SR_FD;			\
-	}							\
-	last = sh64_switch_to(prev, &prev->thread, next,	\
-			      &next->thread);			\
-} while (0)
-
-#define __uses_jump_to_uncached
-
-#define jump_to_uncached()	do { } while (0)
-#define back_to_cached()	do { } while (0)
-
-#endif /* __ASM_SH_SYSTEM_64_H */
diff --git a/include/asm-sh/systemh7751.h b/include/asm-sh/systemh7751.h
deleted file mode 100644
index 4161122c84ef..000000000000
--- a/include/asm-sh/systemh7751.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
-#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
-
-/*
- * linux/include/asm-sh/systemh/7751systemh.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH support
-
- * Modified for 7751 SystemH by
- * Jonathan Short, 2002.
- */
-
-/* Box specific addresses.  */
-
-#define PA_ROM		0x00000000	/* EPROM */
-#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_FROM		0x01000000	/* EPROM */
-#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
-#define PA_EXT1		0x04000000
-#define PA_EXT1_SIZE	0x04000000
-#define PA_EXT2		0x08000000
-#define PA_EXT2_SIZE	0x04000000
-#define PA_SDRAM	0x0c000000
-#define PA_SDRAM_SIZE	0x04000000
-
-#define PA_EXT4		0x12000000
-#define PA_EXT4_SIZE	0x02000000
-#define PA_EXT5		0x14000000
-#define PA_EXT5_SIZE	0x04000000
-#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
-
-#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
-#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
-#define PA_LED		0xba000000	/* LED */
-#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
-
-#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
-#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
-#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
-#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
-#define MRSHPC_MODE     (PA_MRSHPC + 4)
-#define MRSHPC_OPTION   (PA_MRSHPC + 6)
-#define MRSHPC_CSR      (PA_MRSHPC + 8)
-#define MRSHPC_ISR      (PA_MRSHPC + 10)
-#define MRSHPC_ICR      (PA_MRSHPC + 12)
-#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
-#define MRSHPC_CDCR     (PA_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
-
-#define BCR_ILCRA	(PA_BCR + 0)
-#define BCR_ILCRB	(PA_BCR + 2)
-#define BCR_ILCRC	(PA_BCR + 4)
-#define BCR_ILCRD	(PA_BCR + 6)
-#define BCR_ILCRE	(PA_BCR + 8)
-#define BCR_ILCRF	(PA_BCR + 10)
-#define BCR_ILCRG	(PA_BCR + 12)
-
-#define IRQ_79C973	13
-
-#define __IO_PREFIX	sh7751systemh
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/include/asm-sh/termbits.h b/include/asm-sh/termbits.h
deleted file mode 100644
index 77db116948cf..000000000000
--- a/include/asm-sh/termbits.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_SH_TERMBITS_H
-#define __ASM_SH_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define	   BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __ASM_SH_TERMBITS_H */
diff --git a/include/asm-sh/termios.h b/include/asm-sh/termios.h
deleted file mode 100644
index 0a8c793c76f2..000000000000
--- a/include/asm-sh/termios.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef __ASM_SH_TERMIOS_H
-#define __ASM_SH_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __ASM_SH_TERMIOS_H */
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
deleted file mode 100644
index c50e5d35fe84..000000000000
--- a/include/asm-sh/thread_info.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef __ASM_SH_THREAD_INFO_H
-#define __ASM_SH_THREAD_INFO_H
-
-/* SuperH version
- * Copyright (C) 2002  Niibe Yutaka
- *
- * The copyright of original i386 version is:
- *
- *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
- *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-#ifdef __KERNEL__
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	__u32			cpu;
-	int			preempt_count; /* 0 => preemptable, <0 => BUG */
-	mm_segment_t		addr_limit;	/* thread address space */
-	struct restart_block	restart_block;
-	unsigned long		previous_sp;	/* sp of previous stack in case
-						   of nested IRQ stacks */
-	__u8			supervisor_stack[0];
-};
-
-#endif
-
-#define PREEMPT_ACTIVE		0x10000000
-
-#if defined(CONFIG_4KSTACKS)
-#define THREAD_SIZE_ORDER	(0)
-#elif defined(CONFIG_PAGE_SIZE_4KB)
-#define THREAD_SIZE_ORDER	(1)
-#elif defined(CONFIG_PAGE_SIZE_8KB)
-#define THREAD_SIZE_ORDER	(1)
-#elif defined(CONFIG_PAGE_SIZE_64KB)
-#define THREAD_SIZE_ORDER	(0)
-#else
-#error "Unknown thread size"
-#endif
-
-#define THREAD_SIZE	(PAGE_SIZE << THREAD_SIZE_ORDER)
-#define STACK_WARN	(THREAD_SIZE >> 3)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-	.preempt_count	= 1,			\
-	.addr_limit	= KERNEL_DS,		\
-	.restart_block	= {			\
-		.fn = do_no_restart_syscall,	\
-	},					\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* how to get the current stack pointer from C */
-register unsigned long current_stack_pointer asm("r15") __used;
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-#if defined(CONFIG_SUPERH64)
-	__asm__ __volatile__ ("getcon	cr17, %0" : "=r" (ti));
-#elif defined(CONFIG_CPU_HAS_SR_RB)
-	__asm__ __volatile__ ("stc	r7_bank, %0" : "=r" (ti));
-#else
-	unsigned long __dummy;
-
-	__asm__ __volatile__ (
-		"mov	r15, %0\n\t"
-		"and	%1, %0\n\t"
-		: "=&r" (ti), "=r" (__dummy)
-		: "1" (~(THREAD_SIZE - 1))
-		: "memory");
-#endif
-
-	return ti;
-}
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(ti)	kzalloc(THREAD_SIZE, GFP_KERNEL)
-#else
-#define alloc_thread_info(ti)	kmalloc(THREAD_SIZE, GFP_KERNEL)
-#endif
-#define free_thread_info(ti)	kfree(ti)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_RESTORE_SIGMASK	3	/* restore signal mask in do_signal() */
-#define TIF_SINGLESTEP		4	/* singlestepping active */
-#define TIF_SYSCALL_AUDIT	5
-#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18
-#define TIF_FREEZE		19
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT		(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK		0x000000FE	/* work to do on interrupt/exception return */
-#define _TIF_ALLWORK_MASK	0x000000FF	/* work to do on any return to u-space */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h
deleted file mode 100644
index 701ba84c7049..000000000000
--- a/include/asm-sh/timer.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_SH_TIMER_H
-#define __ASM_SH_TIMER_H
-
-#include <linux/sysdev.h>
-#include <linux/clocksource.h>
-#include <asm/cpu/timer.h>
-
-struct sys_timer_ops {
-	int (*init)(void);
-	int (*start)(void);
-	int (*stop)(void);
-	cycle_t (*read)(void);
-#ifndef CONFIG_GENERIC_TIME
-	unsigned long (*get_offset)(void);
-#endif
-};
-
-struct sys_timer {
-	const char		*name;
-
-	struct sys_device	dev;
-	struct sys_timer_ops	*ops;
-};
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
-extern struct sys_timer *sys_timer;
-
-#ifndef CONFIG_GENERIC_TIME
-static inline unsigned long get_timer_offset(void)
-{
-	return sys_timer->ops->get_offset();
-}
-#endif
-
-/* arch/sh/kernel/timers/timer.c */
-struct sys_timer *get_sys_timer(void);
-
-/* arch/sh/kernel/time.c */
-void handle_timer_tick(void);
-extern unsigned long sh_hpt_frequency;
-extern struct clocksource clocksource_sh;
-
-#endif /* __ASM_SH_TIMER_H */
diff --git a/include/asm-sh/timex.h b/include/asm-sh/timex.h
deleted file mode 100644
index a873e24113cf..000000000000
--- a/include/asm-sh/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-sh/timex.h
- *
- * sh architecture timex specifications
- */
-#ifndef __ASM_SH_TIMEX_H
-#define __ASM_SH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
-
-typedef unsigned long long cycles_t;
-
-static __inline__ cycles_t get_cycles (void)
-{
-	return 0;
-}
-
-#endif /* __ASM_SH_TIMEX_H */
diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h
deleted file mode 100644
index 03f3583c8918..000000000000
--- a/include/asm-sh/titan.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Platform defintions for Titan
- */
-#ifndef _ASM_SH_TITAN_H
-#define _ASM_SH_TITAN_H
-
-#define __IO_PREFIX titan
-#include <asm/io_generic.h>
-
-/* IRQ assignments */
-#define TITAN_IRQ_WAN		2	/* eth0 (WAN) */
-#define TITAN_IRQ_LAN		5	/* eth1 (LAN) */
-#define TITAN_IRQ_MPCIA		8	/* mPCI A */
-#define TITAN_IRQ_MPCIB		11	/* mPCI B */
-#define TITAN_IRQ_USB		11	/* USB */
-
-#endif /* __ASM_SH_TITAN_H */
diff --git a/include/asm-sh/tlb.h b/include/asm-sh/tlb.h
deleted file mode 100644
index 88ff1ae8a6b8..000000000000
--- a/include/asm-sh/tlb.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_SH_TLB_H
-#define __ASM_SH_TLB_H
-
-#ifdef CONFIG_SUPERH64
-# include "tlb_64.h"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define tlb_start_vma(tlb, vma) \
-	flush_cache_range(vma, vma->vm_start, vma->vm_end)
-
-#define tlb_end_vma(tlb, vma)	\
-	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
-
-/*
- * Flush whole TLBs for MM
- */
-#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
-
-#include <linux/pagemap.h>
-#include <asm-generic/tlb.h>
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TLB_H */
diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h
deleted file mode 100644
index 0a96f3af69e3..000000000000
--- a/include/asm-sh/tlb_64.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * include/asm-sh/tlb_64.h
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_TLB_64_H
-#define __ASM_SH_TLB_64_H
-
-/* ITLB defines */
-#define ITLB_FIXED	0x00000000	/* First fixed ITLB, see head.S */
-#define ITLB_LAST_VAR_UNRESTRICTED	0x000003F0	/* Last ITLB */
-
-/* DTLB defines */
-#define DTLB_FIXED	0x00800000	/* First fixed DTLB, see head.S */
-#define DTLB_LAST_VAR_UNRESTRICTED	0x008003F0	/* Last DTLB */
-
-#ifndef __ASSEMBLY__
-
-/**
- * for_each_dtlb_entry
- *
- * @tlb:	TLB entry
- *
- * Iterate over free (non-wired) DTLB entries
- */
-#define for_each_dtlb_entry(tlb)		\
-	for (tlb  = cpu_data->dtlb.first;	\
-	     tlb <= cpu_data->dtlb.last;	\
-	     tlb += cpu_data->dtlb.step)
-
-/**
- * for_each_itlb_entry
- *
- * @tlb:	TLB entry
- *
- * Iterate over free (non-wired) ITLB entries
- */
-#define for_each_itlb_entry(tlb)		\
-	for (tlb  = cpu_data->itlb.first;	\
-	     tlb <= cpu_data->itlb.last;	\
-	     tlb += cpu_data->itlb.step)
-
-/**
- * __flush_tlb_slot
- *
- * @slot:	Address of TLB slot.
- *
- * Flushes TLB slot @slot.
- */
-static inline void __flush_tlb_slot(unsigned long long slot)
-{
-	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
-}
-
-#ifdef CONFIG_MMU
-/* arch/sh64/mm/tlb.c */
-int sh64_tlb_init(void);
-unsigned long long sh64_next_free_dtlb_entry(void);
-unsigned long long sh64_get_wired_dtlb_entry(void);
-int sh64_put_wired_dtlb_entry(unsigned long long entry);
-void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
-			 unsigned long asid, unsigned long paddr);
-void sh64_teardown_tlb_slot(unsigned long long config_addr);
-#else
-#define sh64_tlb_init()					do { } while (0)
-#define sh64_next_free_dtlb_entry()			(0)
-#define sh64_get_wired_dtlb_entry()			(0)
-#define sh64_put_wired_dtlb_entry(entry)		do { } while (0)
-#define sh64_setup_tlb_slot(conf, virt, asid, phys)	do { } while (0)
-#define sh64_teardown_tlb_slot(addr)			do { } while (0)
-#endif /* CONFIG_MMU */
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_TLB_64_H */
diff --git a/include/asm-sh/tlbflush.h b/include/asm-sh/tlbflush.h
deleted file mode 100644
index e0ac97221ae6..000000000000
--- a/include/asm-sh/tlbflush.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef __ASM_SH_TLBFLUSH_H
-#define __ASM_SH_TLBFLUSH_H
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_all() flushes all processes TLBs
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- */
-extern void local_flush_tlb_all(void);
-extern void local_flush_tlb_mm(struct mm_struct *mm);
-extern void local_flush_tlb_range(struct vm_area_struct *vma,
-				  unsigned long start,
-				  unsigned long end);
-extern void local_flush_tlb_page(struct vm_area_struct *vma,
-				 unsigned long page);
-extern void local_flush_tlb_kernel_range(unsigned long start,
-					 unsigned long end);
-extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
-
-#ifdef CONFIG_SMP
-
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-			    unsigned long end);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-extern void flush_tlb_one(unsigned long asid, unsigned long page);
-
-#else
-
-#define flush_tlb_all()			local_flush_tlb_all()
-#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
-#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
-#define flush_tlb_one(asid, page)	local_flush_tlb_one(asid, page)
-
-#define flush_tlb_range(vma, start, end)	\
-	local_flush_tlb_range(vma, start, end)
-
-#define flush_tlb_kernel_range(start, end)	\
-	local_flush_tlb_kernel_range(start, end)
-
-#endif /* CONFIG_SMP */
-
-#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h
deleted file mode 100644
index 95f0085e098a..000000000000
--- a/include/asm-sh/topology.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _ASM_SH_TOPOLOGY_H
-#define _ASM_SH_TOPOLOGY_H
-
-#ifdef CONFIG_NUMA
-
-/* sched_domains SD_NODE_INIT for sh machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.span			= CPU_MASK_NONE,	\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 2,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 2,			\
-	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_FORK	\
-				| SD_BALANCE_EXEC	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
-}
-
-#define cpu_to_node(cpu)	((void)(cpu),0)
-#define parent_node(node)	((void)(node),0)
-
-#define node_to_cpumask(node)	((void)node, cpu_online_map)
-#define node_to_first_cpu(node)	((void)(node),0)
-
-#define pcibus_to_node(bus)	((void)(bus), -1)
-#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)) \
-				)
-#endif
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h
deleted file mode 100644
index beea4e6f8dfd..000000000000
--- a/include/asm-sh/types.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef __ASM_SH_TYPES_H
-#define __ASM_SH_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-
-#ifdef CONFIG_SUPERH32
-typedef u16 opcode_t;
-#else
-typedef u32 opcode_t;
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH_TYPES_H */
diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h
deleted file mode 100644
index b3440c305b5d..000000000000
--- a/include/asm-sh/uaccess.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_SH_UACCESS_H
-#define __ASM_SH_UACCESS_H
-
-#ifdef CONFIG_SUPERH32
-# include "uaccess_32.h"
-#else
-# include "uaccess_64.h"
-#endif
-
-static inline unsigned long
-copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	unsigned long __copy_from = (unsigned long) from;
-	__kernel_size_t __copy_size = (__kernel_size_t) n;
-
-	if (__copy_size && __access_ok(__copy_from, __copy_size))
-		return __copy_user(to, from, __copy_size);
-
-	return __copy_size;
-}
-
-static inline unsigned long
-copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	unsigned long __copy_to = (unsigned long) to;
-	__kernel_size_t __copy_size = (__kernel_size_t) n;
-
-	if (__copy_size && __access_ok(__copy_to, __copy_size))
-		return __copy_user(to, from, __copy_size);
-
-	return __copy_size;
-}
-
-#endif /* __ASM_SH_UACCESS_H */
diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h
deleted file mode 100644
index 1e41fda74bd3..000000000000
--- a/include/asm-sh/uaccess_32.h
+++ /dev/null
@@ -1,489 +0,0 @@
-/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
- *
- * User space memory access functions
- *
- * Copyright (C) 1999, 2002  Niibe Yutaka
- * Copyright (C) 2003  Paul Mundt
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- */
-#ifndef __ASM_SH_UACCESS_32_H
-#define __ASM_SH_UACCESS_32_H
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ    0
-#define VERIFY_WRITE   1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#define get_ds()	(KERNEL_DS)
-
-#if !defined(CONFIG_MMU)
-/* NOMMU is always true */
-#define __addr_ok(addr) (1)
-
-static inline mm_segment_t get_fs(void)
-{
-	return USER_DS;
-}
-
-static inline void set_fs(mm_segment_t s)
-{
-}
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * If we don't have an MMU (or if its disabled) the only thing we really have
- * to look out for is if the address resides somewhere outside of what
- * available RAM we have.
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	return 1;
-}
-#else /* CONFIG_MMU */
-#define __addr_ok(addr) \
-	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	unsigned long flag, sum;
-
-	__asm__("clrt\n\t"
-		"addc	%3, %1\n\t"
-		"movt	%0\n\t"
-		"cmp/hi	%4, %1\n\t"
-		"rotcl	%0"
-		:"=&r" (flag), "=r" (sum)
-		:"1" (addr), "r" (size),
-		 "r" (current_thread_info()->addr_limit.seg)
-		:"t");
-	return flag == 0;
-}
-#endif /* CONFIG_MMU */
-
-#define access_ok(type, addr, size)	\
-	(__chk_user_ptr(addr),		\
-	 __access_ok((unsigned long __force)(addr), (size)))
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As SuperH uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr)		__put_user_check((x), (ptr), sizeof(*(ptr)))
-#define get_user(x,ptr)		__get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr)	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-#define __get_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		__get_user_asm(x, ptr, retval, "b");		\
-		break;						\
-	case 2:							\
-		__get_user_asm(x, ptr, retval, "w");		\
-		break;						\
-	case 4:							\
-		__get_user_asm(x, ptr, retval, "l");		\
-		break;						\
-	default:						\
-		__get_user_unknown();				\
-		break;						\
-	}							\
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size)				\
-({								\
-	long __gu_err;						\
-	unsigned long __gu_val;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_check(x,ptr,size)					\
-({									\
-	long __gu_err = -EFAULT;					\
-	unsigned long __gu_val = 0;					\
-	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
-	if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))		\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-	__gu_err;							\
-})
-
-#define __get_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov." insn "	%2, %1\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov	#0, %1\n\t" \
-	"mov.l	4f, %0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3, %0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	:"=&r" (err), "=&r" (x) \
-	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
-
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)		\
-do {							\
-	retval = 0;					\
-	switch (size) {					\
-	case 1:						\
-		__put_user_asm(x, ptr, retval, "b");	\
-		break;					\
-	case 2:						\
-		__put_user_asm(x, ptr, retval, "w");	\
-		break;					\
-	case 4:						\
-		__put_user_asm(x, ptr, retval, "l");	\
-		break;					\
-	case 8:						\
-		__put_user_u64(x, ptr, retval);		\
-		break;					\
-	default:					\
-		__put_user_unknown();			\
-	}						\
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size)				\
-({								\
-	long __pu_err;						\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
-	__pu_err;						\
-})
-
-#define __put_user_check(x,ptr,size)				\
-({								\
-	long __pu_err = -EFAULT;				\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
-		__put_user_size((x), __pu_addr, (size),		\
-				__pu_err);			\
-	__pu_err;						\
-})
-
-#define __put_user_asm(x, addr, err, insn) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov." insn "	%1, %2\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov.l	4f, %0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3, %0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	:"=&r" (err) \
-	:"r" (x), "m" (__m(addr)), "i" (-EFAULT), "0" (err)	\
-        :"memory"); })
-
-#if defined(CONFIG_CPU_LITTLE_ENDIAN)
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov.l	%R1,%2\n\t" \
-	"mov.l	%S1,%T2\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov.l	4f,%0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3,%0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	: "=r" (retval) \
-	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
-        : "memory"); })
-#else
-#define __put_user_u64(val,addr,retval) \
-({ \
-__asm__ __volatile__( \
-	"1:\n\t" \
-	"mov.l	%S1,%2\n\t" \
-	"mov.l	%R1,%T2\n\t" \
-	"2:\n" \
-	".section	.fixup,\"ax\"\n" \
-	"3:\n\t" \
-	"mov.l	4f,%0\n\t" \
-	"jmp	@%0\n\t" \
-	" mov	%3,%0\n\t" \
-	".balign	4\n" \
-	"4:	.long	2b\n\t" \
-	".previous\n" \
-	".section	__ex_table,\"a\"\n\t" \
-	".long	1b, 3b\n\t" \
-	".previous" \
-	: "=r" (retval) \
-	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
-        : "memory"); })
-#endif
-
-extern void __put_user_unknown(void);
-
-/* Generic arbitrary sized copy.  */
-/* Return the number of bytes NOT copied */
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
-
-
-static __always_inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	return __copy_user(to, (__force void *)from, n);
-}
-
-static __always_inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	return __copy_user((__force void *)to, from, n);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/*
- * Clear the area and return remaining number of bytes
- * (on failure.  Usually it's 0.)
- */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-static __inline__ int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-	__kernel_size_t res;
-	unsigned long __dummy, _d, _s, _c;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"mov.b	@%2+, %1\n\t"
-		"cmp/eq	#0, %1\n\t"
-		"bt/s	2f\n"
-		"1:\n"
-		"mov.b	%1, @%3\n\t"
-		"dt	%4\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %3\n\t"
-		"2:\n\t"
-		"sub	%4, %0\n"
-		"3:\n"
-		".section .fixup,\"ax\"\n"
-		"4:\n\t"
-		"mov.l	5f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	%9, %0\n\t"
-		".balign 4\n"
-		"5:	.long 3b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 9b,4b\n"
-		".previous"
-		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
-		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
-		  "i" (-EFAULT)
-		: "memory", "t");
-
-	return res;
-}
-
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static __inline__ long __strnlen_user(const char __user *__s, long __n)
-{
-	unsigned long res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"1:\t"
-		"mov.b	@(%0,%3), %1\n\t"
-		"cmp/eq	%4, %0\n\t"
-		"bt/s	2f\n\t"
-		" add	#1, %0\n\t"
-		"tst	%1, %1\n\t"
-		"bf	1b\n\t"
-		"2:\n"
-		".section .fixup,\"ax\"\n"
-		"3:\n\t"
-		"mov.l	4f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	#0, %0\n"
-		".balign 4\n"
-		"4:	.long 2b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 1b,3b\n"
-		".previous"
-		: "=z" (res), "=&r" (__dummy)
-		: "0" (0), "r" (__s), "r" (__n)
-		: "t");
-	return res;
-}
-
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static __inline__ long strnlen_user(const char __user *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h
deleted file mode 100644
index a9b68d094844..000000000000
--- a/include/asm-sh/uaccess_64.h
+++ /dev/null
@@ -1,285 +0,0 @@
-#ifndef __ASM_SH_UACCESS_64_H
-#define __ASM_SH_UACCESS_64_H
-
-/*
- * include/asm-sh/uaccess_64.h
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * User space memory access functions
- *
- * Copyright (C) 1999  Niibe Yutaka
- *
- *  Based on:
- *     MIPS implementation version 1.15 by
- *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
- *     and i386 version.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#define VERIFY_READ    0
-#define VERIFY_WRITE   1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are misnamed.
- */
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS		MAKE_MM_SEG(0x80000000)
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()        (current_thread_info()->addr_limit)
-#define set_fs(x)       (current_thread_info()->addr_limit=(x))
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-/*
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1)
-
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-#define __access_ok(addr,size) (__range_ok(addr,size) == 0)
-
-/*
- * Uh, these should become the main single-value transfer routines ...
- * They automatically use the right size if we just have the right
- * pointer type ...
- *
- * As MIPS uses the same address space for kernel and user data, we
- * can just do these as direct assignments.
- *
- * Careful to not
- * (a) re-use the arguments for side effects (sizeof is ok)
- * (b) require any knowledge of processes at this stage
- */
-#define put_user(x,ptr)	__put_user_check((x),(ptr),sizeof(*(ptr)))
-#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-/*
- * The "xxx_ret" versions return constant specified in third argument, if
- * something bad happens. These macros can be optimized for the
- * case of just returning from the function xxx_ret is used.
- */
-
-#define put_user_ret(x,ptr,ret) ({ \
-if (put_user(x,ptr)) return ret; })
-
-#define get_user_ret(x,ptr,ret) ({ \
-if (get_user(x,ptr)) return ret; })
-
-#define __put_user_ret(x,ptr,ret) ({ \
-if (__put_user(x,ptr)) return ret; })
-
-#define __get_user_ret(x,ptr,ret) ({ \
-if (__get_user(x,ptr)) return ret; })
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
-
-#define __get_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		retval = __get_user_asm_b(x, ptr);		\
-		break;						\
-	case 2:							\
-		retval = __get_user_asm_w(x, ptr);		\
-		break;						\
-	case 4:							\
-		retval = __get_user_asm_l(x, ptr);		\
-		break;						\
-	case 8:							\
-		retval = __get_user_asm_q(x, ptr);		\
-		break;						\
-	default:						\
-		__get_user_unknown();				\
-		break;						\
-	}							\
-} while (0)
-
-#define __get_user_nocheck(x,ptr,size)				\
-({								\
-	long __gu_err, __gu_val;				\
-	__get_user_size((void *)&__gu_val, (long)(ptr),		\
-			(size), __gu_err);			\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_check(x,ptr,size)				\
-({								\
-	long __gu_addr = (long)(ptr);				\
-	long __gu_err = -EFAULT, __gu_val;			\
-	if (__access_ok(__gu_addr, (size)))			\
-		__get_user_size((void *)&__gu_val, __gu_addr,	\
-				(size), __gu_err);		\
-	(x) = (__typeof__(*(ptr))) __gu_val;			\
-	__gu_err;						\
-})
-
-extern long __get_user_asm_b(void *, long);
-extern long __get_user_asm_w(void *, long);
-extern long __get_user_asm_l(void *, long);
-extern long __get_user_asm_q(void *, long);
-extern void __get_user_unknown(void);
-
-#define __put_user_size(x,ptr,size,retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		retval = __put_user_asm_b(x, ptr);		\
-		break;						\
-	case 2:							\
-		retval = __put_user_asm_w(x, ptr);		\
-		break;						\
-	case 4:							\
-		retval = __put_user_asm_l(x, ptr);		\
-		break;						\
-	case 8:							\
-		retval = __put_user_asm_q(x, ptr);		\
-		break;						\
-	default:						\
-		__put_user_unknown();				\
-	}							\
-} while (0)
-
-#define __put_user_nocheck(x,ptr,size)				\
-({								\
-	long __pu_err;						\
-	__typeof__(*(ptr)) __pu_val = (x);			\
-	__put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \
-	__pu_err;						\
-})
-
-#define __put_user_check(x,ptr,size)				\
-({								\
-	long __pu_err = -EFAULT;				\
-	long __pu_addr = (long)(ptr);				\
-	__typeof__(*(ptr)) __pu_val = (x);			\
-								\
-	if (__access_ok(__pu_addr, (size)))			\
-		__put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\
-	__pu_err;						\
-})
-
-extern long __put_user_asm_b(void *, long);
-extern long __put_user_asm_w(void *, long);
-extern long __put_user_asm_l(void *, long);
-extern long __put_user_asm_q(void *, long);
-extern void __put_user_unknown(void);
-
-
-/* Generic arbitrary sized copy.  */
-/* Return the number of bytes NOT copied */
-/* XXX: should be such that: 4byte and the rest. */
-extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n);
-
-#define copy_to_user_ret(to,from,n,retval) ({ \
-if (copy_to_user(to,from,n)) \
-	return retval; \
-})
-
-#define __copy_to_user(to,from,n)		\
-	__copy_user((void *)(to),		\
-		    (void *)(from), n)
-
-#define __copy_to_user_ret(to,from,n,retval) ({ \
-if (__copy_to_user(to,from,n)) \
-	return retval; \
-})
-
-#define copy_from_user_ret(to,from,n,retval) ({ \
-if (copy_from_user(to,from,n)) \
-	return retval; \
-})
-
-#define __copy_from_user(to,from,n)		\
-	__copy_user((void *)(to),		\
-		    (void *)(from), n)
-
-#define __copy_from_user_ret(to,from,n,retval) ({ \
-if (__copy_from_user(to,from,n)) \
-	return retval; \
-})
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/* XXX: Not sure it works well..
-   should be such that: 4byte clear and the rest. */
-extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
-
-#define clear_user(addr,n) ({ \
-void * __cl_addr = (addr); \
-unsigned long __cl_size = (n); \
-if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
-__cl_size = __clear_user(__cl_addr, __cl_size); \
-__cl_size; })
-
-extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count);
-
-#define strncpy_from_user(dest,src,count) ({ \
-unsigned long __sfu_src = (unsigned long) (src); \
-int __sfu_count = (int) (count); \
-long __sfu_res = -EFAULT; \
-if(__access_ok(__sfu_src, __sfu_count)) { \
-__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
-} __sfu_res; })
-
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-
-/*
- * Return the size of a string (including the ending 0!)
- */
-extern long __strnlen_user(const char *__s, long __n);
-
-static inline long strnlen_user(const char *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-#ifdef CONFIG_MMU
-#define ARCH_HAS_SEARCH_EXTABLE
-#endif
-
-/* Returns 0 if exception not found and fixup.unit otherwise.  */
-extern unsigned long search_exception_table(unsigned long addr);
-extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
-
-#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/include/asm-sh/ubc.h b/include/asm-sh/ubc.h
deleted file mode 100644
index 56f4e30dc49c..000000000000
--- a/include/asm-sh/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_UBC_H
-#define __ASM_SH_UBC_H
-#ifdef __KERNEL__
-
-#include <asm/cpu/ubc.h>
-
-/* User Break Controller */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define UBC_TYPE_SH7729	(current_cpu_data.type == CPU_SH7729)
-#else
-#define UBC_TYPE_SH7729	0
-#endif
-
-#define BAMR_ASID		(1 << 2)
-#define BAMR_NONE		0
-#define BAMR_10			0x1
-#define BAMR_12			0x2
-#define BAMR_ALL		0x3
-#define BAMR_16			0x8
-#define BAMR_20			0x9
-
-#define BBR_INST		(1 << 4)
-#define BBR_DATA		(2 << 4)
-#define BBR_READ		(1 << 2)
-#define BBR_WRITE		(2 << 2)
-#define BBR_BYTE		0x1
-#define BBR_HALF		0x2
-#define BBR_LONG		0x3
-#define BBR_QUAD		(1 << 6)	/* SH7750 */
-#define BBR_CPU			(1 << 6)	/* SH7709A,SH7729 */
-#define BBR_DMA			(2 << 6)	/* SH7709A,SH7729 */
-
-#define BRCR_CMFA		(1 << 15)
-#define BRCR_CMFB		(1 << 14)
-#define BRCR_PCTE		(1 << 11)
-#define BRCR_PCBA		(1 << 10)	/* 1: after execution */
-#define BRCR_DBEB		(1 << 7)
-#define BRCR_PCBB		(1 << 6)
-#define BRCR_SEQ		(1 << 3)
-#define BRCR_UBDE		(1 << 0)
-
-#ifndef __ASSEMBLY__
-/* arch/sh/kernel/cpu/ubc.S */
-extern void ubc_sleep(void);
-
-#ifdef CONFIG_UBC_WAKEUP
-extern void ubc_wakeup(void);
-#else
-#define ubc_wakeup()	do { } while (0)
-#endif
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UBC_H */
diff --git a/include/asm-sh/ucontext.h b/include/asm-sh/ucontext.h
deleted file mode 100644
index 202ef1d5a3c4..000000000000
--- a/include/asm-sh/ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ASM_SH_UCONTEXT_H
-#define __ASM_SH_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* __ASM_SH_UCONTEXT_H */
diff --git a/include/asm-sh/unaligned.h b/include/asm-sh/unaligned.h
deleted file mode 100644
index c1641a01d50f..000000000000
--- a/include/asm-sh/unaligned.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_SH_UNALIGNED_H
-#define _ASM_SH_UNALIGNED_H
-
-/* SH can't handle unaligned accesses. */
-#ifdef __LITTLE_ENDIAN__
-# include <linux/unaligned/le_struct.h>
-# include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned	__get_unaligned_le
-# define put_unaligned	__put_unaligned_le
-#else
-# include <linux/unaligned/be_struct.h>
-# include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned	__get_unaligned_be
-# define put_unaligned	__put_unaligned_be
-#endif
-
-#endif /* _ASM_SH_UNALIGNED_H */
diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h
deleted file mode 100644
index 4b21f369c28c..000000000000
--- a/include/asm-sh/unistd.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_SUPERH32
-# include "unistd_32.h"
-#else
-# include "unistd_64.h"
-#endif
diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h
deleted file mode 100644
index 0b07212ec659..000000000000
--- a/include/asm-sh/unistd_32.h
+++ /dev/null
@@ -1,378 +0,0 @@
-#ifndef __ASM_SH_UNISTD_H
-#define __ASM_SH_UNISTD_H
-
-/*
- * Copyright (C) 1999  Niibe Yutaka
- */
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86old		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_vm86		166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_streams1		188	/* some people actually want it */
-#define __NR_streams2		189	/* some people actually want it */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-#define __NR_getdents64		220
-#define __NR_fcntl64		221
-/* 223 is unused */
-#define __NR_gettid		224
-#define __NR_readahead		225
-#define __NR_setxattr		226
-#define __NR_lsetxattr		227
-#define __NR_fsetxattr		228
-#define __NR_getxattr		229
-#define __NR_lgetxattr		230
-#define __NR_fgetxattr		231
-#define __NR_listxattr		232
-#define __NR_llistxattr		233
-#define __NR_flistxattr		234
-#define __NR_removexattr	235
-#define __NR_lremovexattr	236
-#define __NR_fremovexattr	237
-#define __NR_tkill		238
-#define __NR_sendfile64		239
-#define __NR_futex		240
-#define __NR_sched_setaffinity	241
-#define __NR_sched_getaffinity	242
-#define __NR_set_thread_area	243
-#define __NR_get_thread_area	244
-#define __NR_io_setup		245
-#define __NR_io_destroy		246
-#define __NR_io_getevents	247
-#define __NR_io_submit		248
-#define __NR_io_cancel		249
-#define __NR_fadvise64		250
-
-#define __NR_exit_group		252
-#define __NR_lookup_dcookie	253
-#define __NR_epoll_create	254
-#define __NR_epoll_ctl		255
-#define __NR_epoll_wait		256
-#define __NR_remap_file_pages	257
-#define __NR_set_tid_address	258
-#define __NR_timer_create	259
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		268
-#define __NR_fstatfs64		269
-#define __NR_tgkill		270
-#define __NR_utimes		271
-#define __NR_fadvise64_64	272
-#define __NR_vserver		273
-#define __NR_mbind              274
-#define __NR_get_mempolicy      275
-#define __NR_set_mempolicy      276
-#define __NR_mq_open            277
-#define __NR_mq_unlink          (__NR_mq_open+1)
-#define __NR_mq_timedsend       (__NR_mq_open+2)
-#define __NR_mq_timedreceive    (__NR_mq_open+3)
-#define __NR_mq_notify          (__NR_mq_open+4)
-#define __NR_mq_getsetattr      (__NR_mq_open+5)
-#define __NR_kexec_load		283
-#define __NR_waitid		284
-#define __NR_add_key		285
-#define __NR_request_key	286
-#define __NR_keyctl		287
-#define __NR_ioprio_set		288
-#define __NR_ioprio_get		289
-#define __NR_inotify_init	290
-#define __NR_inotify_add_watch	291
-#define __NR_inotify_rm_watch	292
-/* 293 is unused */
-#define __NR_migrate_pages	294
-#define __NR_openat		295
-#define __NR_mkdirat		296
-#define __NR_mknodat		297
-#define __NR_fchownat		298
-#define __NR_futimesat		299
-#define __NR_fstatat64		300
-#define __NR_unlinkat		301
-#define __NR_renameat		302
-#define __NR_linkat		303
-#define __NR_symlinkat		304
-#define __NR_readlinkat		305
-#define __NR_fchmodat		306
-#define __NR_faccessat		307
-#define __NR_pselect6		308
-#define __NR_ppoll		309
-#define __NR_unshare		310
-#define __NR_set_robust_list	311
-#define __NR_get_robust_list	312
-#define __NR_splice		313
-#define __NR_sync_file_range	314
-#define __NR_tee		315
-#define __NR_vmsplice		316
-#define __NR_move_pages		317
-#define __NR_getcpu		318
-#define __NR_epoll_pwait	319
-#define __NR_utimensat		320
-#define __NR_signalfd		321
-#define __NR_timerfd_create	322
-#define __NR_eventfd		323
-#define __NR_fallocate		324
-#define __NR_timerfd_settime	325
-#define __NR_timerfd_gettime	326
-
-#define NR_syscalls 327
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UNISTD_H */
diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h
deleted file mode 100644
index 9d21eab52427..000000000000
--- a/include/asm-sh/unistd_64.h
+++ /dev/null
@@ -1,417 +0,0 @@
-#ifndef __ASM_SH_UNISTD_64_H
-#define __ASM_SH_UNISTD_64_H
-
-/*
- * include/asm-sh/unistd_64.h
- *
- * This file contains the system call numbers.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2004  Sean McGoogan
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102	/* old implementation of socket systemcall */
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86old		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_vm86		166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_streams1		188	/* some people actually want it */
-#define __NR_streams2		189	/* some people actually want it */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-
-/* Non-multiplexed socket family */
-#define __NR_socket		220
-#define __NR_bind		221
-#define __NR_connect		222
-#define __NR_listen		223
-#define __NR_accept		224
-#define __NR_getsockname	225
-#define __NR_getpeername	226
-#define __NR_socketpair		227
-#define __NR_send		228
-#define __NR_sendto		229
-#define __NR_recv		230
-#define __NR_recvfrom		231
-#define __NR_shutdown		232
-#define __NR_setsockopt		233
-#define __NR_getsockopt		234
-#define __NR_sendmsg		235
-#define __NR_recvmsg		236
-
-/* Non-multiplexed IPC family */
-#define __NR_semop		237
-#define __NR_semget		238
-#define __NR_semctl		239
-#define __NR_msgsnd		240
-#define __NR_msgrcv		241
-#define __NR_msgget		242
-#define __NR_msgctl		243
-#if 0
-#define __NR_shmatcall		244
-#endif
-#define __NR_shmdt		245
-#define __NR_shmget		246
-#define __NR_shmctl		247
-
-#define __NR_getdents64		248
-#define __NR_fcntl64		249
-/* 223 is unused */
-#define __NR_gettid		252
-#define __NR_readahead		253
-#define __NR_setxattr		254
-#define __NR_lsetxattr		255
-#define __NR_fsetxattr		256
-#define __NR_getxattr		257
-#define __NR_lgetxattr		258
-#define __NR_fgetxattr		269
-#define __NR_listxattr		260
-#define __NR_llistxattr		261
-#define __NR_flistxattr		262
-#define __NR_removexattr	263
-#define __NR_lremovexattr	264
-#define __NR_fremovexattr	265
-#define __NR_tkill		266
-#define __NR_sendfile64		267
-#define __NR_futex		268
-#define __NR_sched_setaffinity	269
-#define __NR_sched_getaffinity	270
-#define __NR_set_thread_area	271
-#define __NR_get_thread_area	272
-#define __NR_io_setup		273
-#define __NR_io_destroy		274
-#define __NR_io_getevents	275
-#define __NR_io_submit		276
-#define __NR_io_cancel		277
-#define __NR_fadvise64		278
-#define __NR_exit_group		280
-
-#define __NR_lookup_dcookie	281
-#define __NR_epoll_create	282
-#define __NR_epoll_ctl		283
-#define __NR_epoll_wait		284
-#define __NR_remap_file_pages	285
-#define __NR_set_tid_address	286
-#define __NR_timer_create	287
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		296
-#define __NR_fstatfs64		297
-#define __NR_tgkill		298
-#define __NR_utimes		299
-#define __NR_fadvise64_64	300
-#define __NR_vserver		301
-#define __NR_mbind              302
-#define __NR_get_mempolicy      303
-#define __NR_set_mempolicy      304
-#define __NR_mq_open            305
-#define __NR_mq_unlink          (__NR_mq_open+1)
-#define __NR_mq_timedsend       (__NR_mq_open+2)
-#define __NR_mq_timedreceive    (__NR_mq_open+3)
-#define __NR_mq_notify          (__NR_mq_open+4)
-#define __NR_mq_getsetattr      (__NR_mq_open+5)
-#define __NR_kexec_load		311
-#define __NR_waitid		312
-#define __NR_add_key		313
-#define __NR_request_key	314
-#define __NR_keyctl		315
-#define __NR_ioprio_set		316
-#define __NR_ioprio_get		317
-#define __NR_inotify_init	318
-#define __NR_inotify_add_watch	319
-#define __NR_inotify_rm_watch	320
-/* 321 is unused */
-#define __NR_migrate_pages	322
-#define __NR_openat		323
-#define __NR_mkdirat		324
-#define __NR_mknodat		325
-#define __NR_fchownat		326
-#define __NR_futimesat		327
-#define __NR_fstatat64		328
-#define __NR_unlinkat		329
-#define __NR_renameat		330
-#define __NR_linkat		331
-#define __NR_symlinkat		332
-#define __NR_readlinkat		333
-#define __NR_fchmodat		334
-#define __NR_faccessat		335
-#define __NR_pselect6		336
-#define __NR_ppoll		337
-#define __NR_unshare		338
-#define __NR_set_robust_list	339
-#define __NR_get_robust_list	340
-#define __NR_splice		341
-#define __NR_sync_file_range	342
-#define __NR_tee		343
-#define __NR_vmsplice		344
-#define __NR_move_pages		345
-#define __NR_getcpu		346
-#define __NR_epoll_pwait	347
-#define __NR_utimensat		348
-#define __NR_signalfd		349
-#define __NR_timerfd_create	350
-#define __NR_eventfd		351
-#define __NR_fallocate		352
-#define __NR_timerfd_settime	353
-#define __NR_timerfd_gettime	354
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 353
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/include/asm-sh/user.h b/include/asm-sh/user.h
deleted file mode 100644
index 8fd3cf6c58d4..000000000000
--- a/include/asm-sh/user.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef __ASM_SH_USER_H
-#define __ASM_SH_USER_H
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd).  The file contents are as follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *	what is present in the file.  Directly after this is a
- *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
- *	are stored as part of the upage.  The upage should always be
- *	only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *	current->brk to pick up all of the user variables, plus any memory
- *	that may have been sbrk'ed.  No attempt is made to determine if a
- *	page is demand-zero or if a page is totally unused, we just cover
- *	the entire range.  All of the addresses are rounded in such a way
- *	that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *	backtrace.  We need to write the data from usp to
- *	current->start_stack, so we round each of these in order to be able
- *	to write an integer number of pages.
- */
-
-#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
-struct user_fpu_struct {
-	unsigned long fp_regs[32];
-	unsigned int fpscr;
-};
-#else
-struct user_fpu_struct {
-	unsigned long fp_regs[16];
-	unsigned long xfp_regs[16];
-	unsigned long fpscr;
-	unsigned long fpul;
-};
-#endif
-
-struct user {
-	struct pt_regs	regs;			/* entire machine state */
-	struct user_fpu_struct fpu;	/* Math Co-processor registers  */
-	int u_fpvalid;		/* True if math co-processor being used */
-	size_t		u_tsize;		/* text size (pages) */
-	size_t		u_dsize;		/* data size (pages) */
-	size_t		u_ssize;		/* stack size (pages) */
-	unsigned long	start_code;		/* text starting address */
-	unsigned long	start_data;		/* data starting address */
-	unsigned long	start_stack;		/* stack starting address */
-	long int	signal;			/* signal causing core dump */
-	unsigned long	u_ar0;			/* help gdb find registers */
-	struct user_fpu_struct* u_fpstate;	/* Math Co-processor pointer */
-	unsigned long	magic;			/* identifies a core file */
-	char		u_comm[32];		/* user command name */
-};
-
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
-#endif /* __ASM_SH_USER_H */
diff --git a/include/asm-sh/vga.h b/include/asm-sh/vga.h
deleted file mode 100644
index 06a5de8ace1a..000000000000
--- a/include/asm-sh/vga.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_VGA_H
-#define __ASM_SH_VGA_H
-
-/* Stupid drivers. */
-
-#endif /* __ASM_SH_VGA_H */
diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h
deleted file mode 100644
index d19ea62ef8c6..000000000000
--- a/include/asm-sh/watchdog.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/asm-sh/watchdog.h
- *
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef __ASM_SH_WATCHDOG_H
-#define __ASM_SH_WATCHDOG_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/cpu/watchdog.h>
-#include <asm/io.h>
-
-/* 
- * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
- */
-#ifndef WTCNT_R
-#  define WTCNT_R	WTCNT
-#endif
-
-#ifndef WTCSR_R
-#  define WTCSR_R	WTCSR
-#endif
-
-#define WTCNT_HIGH	0x5a
-#define WTCSR_HIGH	0xa5
-
-#define WTCSR_CKS2	0x04
-#define WTCSR_CKS1	0x02
-#define WTCSR_CKS0	0x01
-
-/*
- * CKS0-2 supports a number of clock division ratios. At the time the watchdog
- * is enabled, it defaults to a 41 usec overflow period .. we overload this to
- * something a little more reasonable, and really can't deal with anything
- * lower than WTCSR_CKS_1024, else we drop back into the usec range.
- *
- * Clock Division Ratio         Overflow Period
- * --------------------------------------------
- *     1/32 (initial value)       41 usecs
- *     1/64                       82 usecs
- *     1/128                     164 usecs
- *     1/256                     328 usecs
- *     1/512                     656 usecs
- *     1/1024                   1.31 msecs
- *     1/2048                   2.62 msecs
- *     1/4096                   5.25 msecs
- */
-#define WTCSR_CKS_32	0x00
-#define WTCSR_CKS_64	0x01
-#define WTCSR_CKS_128	0x02
-#define WTCSR_CKS_256	0x03
-#define WTCSR_CKS_512	0x04
-#define WTCSR_CKS_1024	0x05
-#define WTCSR_CKS_2048	0x06
-#define WTCSR_CKS_4096	0x07
-
-/**
- * 	sh_wdt_read_cnt - Read from Counter
- * 	Reads back the WTCNT value.
- */
-static inline __u8 sh_wdt_read_cnt(void)
-{
-	return ctrl_inb(WTCNT_R);
-}
-
-/**
- *	sh_wdt_write_cnt - Write to Counter
- *	@val: Value to write
- *
- *	Writes the given value @val to the lower byte of the timer counter.
- *	The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_cnt(__u8 val)
-{
-	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
-}
-
-/**
- * 	sh_wdt_read_csr - Read from Control/Status Register
- *
- *	Reads back the WTCSR value.
- */
-static inline __u8 sh_wdt_read_csr(void)
-{
-	return ctrl_inb(WTCSR_R);
-}
-
-/**
- * 	sh_wdt_write_csr - Write to Control/Status Register
- * 	@val: Value to write
- *
- * 	Writes the given value @val to the lower byte of the control/status
- * 	register. The upper byte is set manually on each write.
- */
-static inline void sh_wdt_write_csr(__u8 val)
-{
-	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/include/asm-sh/xor.h b/include/asm-sh/xor.h
deleted file mode 100644
index c82eb12a5b18..000000000000
--- a/include/asm-sh/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/include/asm-sparc/Kbuild b/include/asm-sparc/Kbuild
deleted file mode 100644
index 671223718f0a..000000000000
--- a/include/asm-sparc/Kbuild
+++ /dev/null
@@ -1,14 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += apc.h
-header-y += asi.h
-header-y += bpp.h
-header-y += jsflash.h
-header-y += openpromio.h
-header-y += reg.h
-header-y += traps.h
-header-y += vfc_ioctls.h
-
-unifdef-y += fbio.h
-unifdef-y += perfctr.h
-unifdef-y += psr.h
diff --git a/include/asm-sparc/apc.h b/include/asm-sparc/apc.h
deleted file mode 100644
index 24e9a7d4d97e..000000000000
--- a/include/asm-sparc/apc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* apc - Driver definitions for power management functions
- * of Aurora Personality Chip (APC) on SPARCstation-4/5 and 
- * derivatives
- *
- * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
- *
- */
-
-#ifndef _SPARC_APC_H
-#define _SPARC_APC_H
-
-#include <linux/ioctl.h>
-
-#define APC_IOC	'A'
-
-#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int)	/* Get fan speed	*/
-#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int)	/* Set fan speed	*/
-
-#define APCIOCGCPWR   _IOR(APC_IOC, 0x02, int)	/* Get CPOWER state	*/
-#define APCIOCSCPWR   _IOW(APC_IOC, 0x03, int)	/* Set CPOWER state	*/
-
-#define APCIOCGBPORT   _IOR(APC_IOC, 0x04, int)	/* Get BPORT state 	*/
-#define APCIOCSBPORT   _IOW(APC_IOC, 0x05, int)	/* Set BPORT state	*/
-
-/*
- * Register offsets
- */
-#define APC_IDLE_REG	0x00
-#define APC_FANCTL_REG	0x20
-#define APC_CPOWER_REG	0x24
-#define APC_BPORT_REG	0x30
-
-#define APC_REGMASK		0x01
-#define APC_BPMASK		0x03
-
-/*
- * IDLE - CPU standby values (set to initiate standby)
- */
-#define APC_IDLE_ON		0x01
-
-/*
- * FANCTL - Fan speed control state values
- */
-#define APC_FANCTL_HI	0x00	/* Fan speed high	*/
-#define APC_FANCTL_LO	0x01	/* Fan speed low	*/
-
-/*
- * CPWR - Convenience power outlet state values 
- */
-#define APC_CPOWER_ON	0x00	/* Conv power on	*/
-#define APC_CPOWER_OFF	0x01	/* Conv power off	*/
-
-/*
- * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on)
- *
- * WARNING: Internal usage of bit ports is platform dependent--
- * don't modify BPORT settings unless you know what you are doing.
- * 
- * On SS5 BPA seems to toggle onboard ethernet loopback... -E
- */
-#define APC_BPORT_A		0x01	/* Bit Port A		*/
-#define APC_BPORT_B		0x02	/* Bit Port B		*/
-
-#endif /* !(_SPARC_APC_H) */
diff --git a/include/asm-sparc/asi.h b/include/asm-sparc/asi.h
deleted file mode 100644
index 158f9b00d43f..000000000000
--- a/include/asm-sparc/asi.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef _SPARC_ASI_H
-#define _SPARC_ASI_H
-
-/* asi.h:  Address Space Identifier values for the sparc.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
- * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
- */
-
-/* The first batch are for the sun4c. */
-
-#define ASI_NULL1           0x00
-#define ASI_NULL2           0x01
-
-/* sun4c and sun4 control registers and mmu/vac ops */
-#define ASI_CONTROL         0x02
-#define ASI_SEGMAP          0x03
-#define ASI_PTE             0x04
-#define ASI_HWFLUSHSEG      0x05
-#define ASI_HWFLUSHPAGE     0x06
-#define ASI_REGMAP          0x06
-#define ASI_HWFLUSHCONTEXT  0x07
-
-#define ASI_USERTXT         0x08
-#define ASI_KERNELTXT       0x09
-#define ASI_USERDATA        0x0a
-#define ASI_KERNELDATA      0x0b
-
-/* VAC Cache flushing on sun4c and sun4 */
-#define ASI_FLUSHSEG        0x0c
-#define ASI_FLUSHPG         0x0d
-#define ASI_FLUSHCTX        0x0e
-
-/* SPARCstation-5: only 6 bits are decoded. */
-/* wo = Write Only, rw = Read Write;        */
-/* ss = Single Size, as = All Sizes;        */
-#define ASI_M_RES00         0x00   /* Don't touch... */
-#define ASI_M_UNA01         0x01   /* Same here... */
-#define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
-#define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
-#define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
-#define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
-#define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
-#define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
-#define ASI_M_USERTXT       0x08   /* Same as ASI_USERTXT; rw, as */
-#define ASI_M_KERNELTXT     0x09   /* Same as ASI_KERNELTXT; rw, as */
-#define ASI_M_USERDATA      0x0A   /* Same as ASI_USERDATA; rw, as */
-#define ASI_M_KERNELDATA    0x0B   /* Same as ASI_KERNELDATA; rw, as */
-#define ASI_M_TXTC_TAG      0x0C   /* Instruction Cache Tag; rw, ss */
-#define ASI_M_TXTC_DATA     0x0D   /* Instruction Cache Data; rw, ss */
-#define ASI_M_DATAC_TAG     0x0E   /* Data Cache Tag; rw, ss */
-#define ASI_M_DATAC_DATA    0x0F   /* Data Cache Data; rw, ss */
-
-/* The following cache flushing ASIs work only with the 'sta'
- * instruction. Results are unpredictable for 'swap' and 'ldstuba',
- * so don't do it.
- */
-
-/* These ASI flushes affect external caches too. */
-#define ASI_M_FLUSH_PAGE    0x10   /* Flush I&D Cache Line (page); wo, ss */
-#define ASI_M_FLUSH_SEG     0x11   /* Flush I&D Cache Line (seg); wo, ss */
-#define ASI_M_FLUSH_REGION  0x12   /* Flush I&D Cache Line (region); wo, ss */
-#define ASI_M_FLUSH_CTX     0x13   /* Flush I&D Cache Line (context); wo, ss */
-#define ASI_M_FLUSH_USER    0x14   /* Flush I&D Cache Line (user); wo, ss */
-
-/* Block-copy operations are available only on certain V8 cpus. */
-#define ASI_M_BCOPY         0x17   /* Block copy */
-
-/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
-#define ASI_M_IFLUSH_PAGE   0x18   /* Flush I Cache Line (page); wo, ss */
-#define ASI_M_IFLUSH_SEG    0x19   /* Flush I Cache Line (seg); wo, ss */
-#define ASI_M_IFLUSH_REGION 0x1A   /* Flush I Cache Line (region); wo, ss */
-#define ASI_M_IFLUSH_CTX    0x1B   /* Flush I Cache Line (context); wo, ss */
-#define ASI_M_IFLUSH_USER   0x1C   /* Flush I Cache Line (user); wo, ss */
-
-/* Block-fill operations are available on certain V8 cpus */
-#define ASI_M_BFILL         0x1F
-
-/* This allows direct access to main memory, actually 0x20 to 0x2f are
- * the available ASI's for physical ram pass-through, but I don't have
- * any idea what the other ones do....
- */
-
-#define ASI_M_BYPASS       0x20   /* Reference MMU bypass; rw, as */
-#define ASI_M_FBMEM        0x29   /* Graphics card frame buffer access */
-#define ASI_M_VMEUS        0x2A   /* VME user 16-bit access */
-#define ASI_M_VMEPS        0x2B   /* VME priv 16-bit access */
-#define ASI_M_VMEUT        0x2C   /* VME user 32-bit access */
-#define ASI_M_VMEPT        0x2D   /* VME priv 32-bit access */
-#define ASI_M_SBUS         0x2E   /* Direct SBus access */
-#define ASI_M_CTL          0x2F   /* Control Space (ECC and MXCC are here) */
-
-
-/* This is ROSS HyperSparc only. */
-#define ASI_M_FLUSH_IWHOLE 0x31   /* Flush entire ICACHE; wo, ss */
-
-/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
-#define ASI_M_IC_FLCLEAR   0x36
-#define ASI_M_DC_FLCLEAR   0x37
-
-#define ASI_M_DCDR         0x39   /* Data Cache Diagnostics Register rw, ss */
-
-#define ASI_M_VIKING_TMP1  0x40	  /* Emulation temporary 1 on Viking */
-/* only available on SuperSparc I */
-/* #define ASI_M_VIKING_TMP2  0x41 */  /* Emulation temporary 2 on Viking */
-
-#define ASI_M_ACTION       0x4c   /* Breakpoint Action Register (GNU/Viking) */
-
-#endif /* _SPARC_ASI_H */
diff --git a/include/asm-sparc/asmmacro.h b/include/asm-sparc/asmmacro.h
deleted file mode 100644
index a619a4d97aae..000000000000
--- a/include/asm-sparc/asmmacro.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* asmmacro.h: Assembler macros.
- *
- * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
- */
-
-#ifndef _SPARC_ASMMACRO_H
-#define _SPARC_ASMMACRO_H
-
-#include <asm/btfixup.h>
-#include <asm/asi.h>
-
-#define GET_PROCESSOR4M_ID(reg) \
-	rd	%tbr, %reg; \
-	srl	%reg, 12, %reg; \
-	and	%reg, 3, %reg;
-
-#define GET_PROCESSOR4D_ID(reg) \
-	lda	[%g0] ASI_M_VIKING_TMP1, %reg;
-
-/* All trap entry points _must_ begin with this macro or else you
- * lose.  It makes sure the kernel has a proper window so that
- * c-code can be called.
- */
-#define SAVE_ALL_HEAD \
-	sethi	%hi(trap_setup), %l4; \
-	jmpl	%l4 + %lo(trap_setup), %l6;
-#define SAVE_ALL \
-	SAVE_ALL_HEAD \
-	 nop;
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
-   likes byte accesses. These are to avoid ifdef mania. */
-
-#ifdef CONFIG_SUN4
-#define lduXa	lduha
-#define stXa	stha
-#else
-#define lduXa	lduba
-#define stXa	stba
-#endif
-
-#endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h
deleted file mode 100644
index 5c944b5a8040..000000000000
--- a/include/asm-sparc/atomic.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/* atomic.h: These still suck, but the I-cache hit rate is higher.
- *
- * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
- * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org)
- *
- * Additions by Keith M Wesolowski (wesolows@foobazco.org) based
- * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.
- */
-
-#ifndef __ARCH_SPARC_ATOMIC__
-#define __ARCH_SPARC_ATOMIC__
-
-#include <linux/types.h>
-
-typedef struct { volatile int counter; } atomic_t;
-
-#ifdef __KERNEL__
-
-#define ATOMIC_INIT(i)  { (i) }
-
-extern int __atomic_add_return(int, atomic_t *);
-extern int atomic_cmpxchg(atomic_t *, int, int);
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-extern int atomic_add_unless(atomic_t *, int, int);
-extern void atomic_set(atomic_t *, int);
-
-#define atomic_read(v)          ((v)->counter)
-
-#define atomic_add(i, v)	((void)__atomic_add_return( (int)(i), (v)))
-#define atomic_sub(i, v)	((void)__atomic_add_return(-(int)(i), (v)))
-#define atomic_inc(v)		((void)__atomic_add_return(        1, (v)))
-#define atomic_dec(v)		((void)__atomic_add_return(       -1, (v)))
-
-#define atomic_add_return(i, v)	(__atomic_add_return( (int)(i), (v)))
-#define atomic_sub_return(i, v)	(__atomic_add_return(-(int)(i), (v)))
-#define atomic_inc_return(v)	(__atomic_add_return(        1, (v)))
-#define atomic_dec_return(v)	(__atomic_add_return(       -1, (v)))
-
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
-#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/* This is the old 24-bit implementation.  It's still used internally
- * by some sparc-specific code, notably the semaphore implementation.
- */
-typedef struct { volatile int counter; } atomic24_t;
-
-#ifndef CONFIG_SMP
-
-#define ATOMIC24_INIT(i)  { (i) }
-#define atomic24_read(v)          ((v)->counter)
-#define atomic24_set(v, i)        (((v)->counter) = i)
-
-#else
-/* We do the bulk of the actual work out of line in two common
- * routines in assembler, see arch/sparc/lib/atomic.S for the
- * "fun" details.
- *
- * For SMP the trick is you embed the spin lock byte within
- * the word, use the low byte so signedness is easily retained
- * via a quick arithmetic shift.  It looks like this:
- *
- *	----------------------------------------
- *	| signed 24-bit counter value |  lock  |  atomic_t
- *	----------------------------------------
- *	 31                          8 7      0
- */
-
-#define ATOMIC24_INIT(i)	{ ((i) << 8) }
-
-static inline int atomic24_read(const atomic24_t *v)
-{
-	int ret = v->counter;
-
-	while(ret & 0xff)
-		ret = v->counter;
-
-	return ret >> 8;
-}
-
-#define atomic24_set(v, i)	(((v)->counter) = ((i) << 8))
-#endif
-
-static inline int __atomic24_add(int i, atomic24_t *v)
-{
-	register volatile int *ptr asm("g1");
-	register int increment asm("g2");
-	register int tmp1 asm("g3");
-	register int tmp2 asm("g4");
-	register int tmp3 asm("g7");
-
-	ptr = &v->counter;
-	increment = i;
-
-	__asm__ __volatile__(
-	"mov	%%o7, %%g4\n\t"
-	"call	___atomic24_add\n\t"
-	" add	%%o7, 8, %%o7\n"
-	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
-	: "0" (increment), "r" (ptr)
-	: "memory", "cc");
-
-	return increment;
-}
-
-static inline int __atomic24_sub(int i, atomic24_t *v)
-{
-	register volatile int *ptr asm("g1");
-	register int increment asm("g2");
-	register int tmp1 asm("g3");
-	register int tmp2 asm("g4");
-	register int tmp3 asm("g7");
-
-	ptr = &v->counter;
-	increment = i;
-
-	__asm__ __volatile__(
-	"mov	%%o7, %%g4\n\t"
-	"call	___atomic24_sub\n\t"
-	" add	%%o7, 8, %%o7\n"
-	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
-	: "0" (increment), "r" (ptr)
-	: "memory", "cc");
-
-	return increment;
-}
-
-#define atomic24_add(i, v) ((void)__atomic24_add((i), (v)))
-#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v)))
-
-#define atomic24_dec_return(v) __atomic24_sub(1, (v))
-#define atomic24_inc_return(v) __atomic24_add(1, (v))
-
-#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0)
-#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0)
-
-#define atomic24_inc(v) ((void)__atomic24_add(1, (v)))
-#define atomic24_dec(v) ((void)__atomic24_sub(1, (v)))
-
-#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0)
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#endif /* !(__KERNEL__) */
-
-#include <asm-generic/atomic.h>
-#endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h
deleted file mode 100644
index e552b8d68450..000000000000
--- a/include/asm-sparc/auxio.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * auxio.h:  Definitions and code for the Auxiliary I/O register.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_AUXIO_H
-#define _SPARC_AUXIO_H
-
-#include <asm/system.h>
-#include <asm/vaddrs.h>
-
-/* This register is an unsigned char in IO space.  It does two things.
- * First, it is used to control the front panel LED light on machines
- * that have it (good for testing entry points to trap handlers and irq's)
- * Secondly, it controls various floppy drive parameters.
- */
-#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
-#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
-#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
-#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
-#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
-#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
-#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
-
-/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
-#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
-
-/* Set the following to zero to eject the floppy. */
-#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
-#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
-
-#ifndef __ASSEMBLY__
-
-/* 
- * NOTE: these routines are implementation dependent-- 
- * understand the hardware you are querying! 
- */
-extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
-extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */
-
-/*
- * The following routines are provided for driver-compatibility
- * with sparc64 (primarily sunlance.c)
- */
-
-#define AUXIO_LTE_ON    1
-#define AUXIO_LTE_OFF   0
-
-/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
- *
- * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
- */
-#define auxio_set_lte(on) \
-do { \
-	if(on) { \
-		set_auxio(AUXIO_LINK_TEST, 0); \
-	} else { \
-		set_auxio(0, AUXIO_LINK_TEST); \
-	} \
-} while (0)
-
-#define AUXIO_LED_ON    1
-#define AUXIO_LED_OFF   0
-
-/* auxio_set_led - Set system front panel LED
- *
- * on - AUXIO_LED_ON or AUXIO_LED_OFF
- */
-#define auxio_set_led(on) \
-do { \
-	if(on) { \
-		set_auxio(AUXIO_LED, 0); \
-	} else { \
-		set_auxio(0, AUXIO_LED); \
-	} \
-} while (0)
-
-#endif /* !(__ASSEMBLY__) */
-
-
-/* AUXIO2 (Power Off Control) */
-extern __volatile__ unsigned char * auxio_power_register;
-
-#define	AUXIO_POWER_DETECT_FAILURE	32
-#define	AUXIO_POWER_CLEAR_FAILURE	2
-#define	AUXIO_POWER_OFF			1
-
-
-#endif /* !(_SPARC_AUXIO_H) */
diff --git a/include/asm-sparc/auxvec.h b/include/asm-sparc/auxvec.h
deleted file mode 100644
index ad6f360261f6..000000000000
--- a/include/asm-sparc/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMSPARC_AUXVEC_H
-#define __ASMSPARC_AUXVEC_H
-
-#endif /* !(__ASMSPARC_AUXVEC_H) */
diff --git a/include/asm-sparc/bitext.h b/include/asm-sparc/bitext.h
deleted file mode 100644
index 297b2f2fcb49..000000000000
--- a/include/asm-sparc/bitext.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * bitext.h: Bit string operations on the sparc, specific to architecture.
- *
- * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com>
- */
-
-#ifndef _SPARC_BITEXT_H
-#define _SPARC_BITEXT_H
-
-#include <linux/spinlock.h>
-
-struct bit_map {
-	spinlock_t lock;
-	unsigned long *map;
-	int size;
-	int used;
-	int last_off;
-	int last_size;
-	int first_free;
-	int num_colors;
-};
-
-extern int bit_map_string_get(struct bit_map *t, int len, int align);
-extern void bit_map_clear(struct bit_map *t, int offset, int len);
-extern void bit_map_init(struct bit_map *t, unsigned long *map, int size);
-
-#endif /* defined(_SPARC_BITEXT_H) */
diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h
deleted file mode 100644
index 68b98a7e6454..000000000000
--- a/include/asm-sparc/bitops.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * bitops.h: Bit string operations on the Sparc.
- *
- * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright 1996 Eddie C. Dost   (ecd@skynet.be)
- * Copyright 2001 Anton Blanchard (anton@samba.org)
- */
-
-#ifndef _SPARC_BITOPS_H
-#define _SPARC_BITOPS_H
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
-extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
-extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
-
-/*
- * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
- * is in the highest of the four bytes and bit '31' is the high bit
- * within the first byte. Sparc is BIG-Endian. Unless noted otherwise
- * all bit-ops return 0 if bit was previously clear and != 0 otherwise.
- */
-static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
-{
-	unsigned long *ADDR, mask;
-
-	ADDR = ((unsigned long *) addr) + (nr >> 5);
-	mask = 1 << (nr & 31);
-
-	return ___set_bit(ADDR, mask) != 0;
-}
-
-static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
-{
-	unsigned long *ADDR, mask;
-
-	ADDR = ((unsigned long *) addr) + (nr >> 5);
-	mask = 1 << (nr & 31);
-
-	(void) ___set_bit(ADDR, mask);
-}
-
-static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
-	unsigned long *ADDR, mask;
-
-	ADDR = ((unsigned long *) addr) + (nr >> 5);
-	mask = 1 << (nr & 31);
-
-	return ___clear_bit(ADDR, mask) != 0;
-}
-
-static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
-{
-	unsigned long *ADDR, mask;
-
-	ADDR = ((unsigned long *) addr) + (nr >> 5);
-	mask = 1 << (nr & 31);
-
-	(void) ___clear_bit(ADDR, mask);
-}
-
-static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
-{
-	unsigned long *ADDR, mask;
-
-	ADDR = ((unsigned long *) addr) + (nr >> 5);
-	mask = 1 << (nr & 31);
-
-	return ___change_bit(ADDR, mask) != 0;
-}
-
-static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
-{
-	unsigned long *ADDR, mask;
-
-	ADDR = ((unsigned long *) addr) + (nr >> 5);
-	mask = 1 << (nr & 31);
-
-	(void) ___change_bit(ADDR, mask);
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#define smp_mb__before_clear_bit()	do { } while(0)
-#define smp_mb__after_clear_bit()	do { } while(0)
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* defined(_SPARC_BITOPS_H) */
diff --git a/include/asm-sparc/bpp.h b/include/asm-sparc/bpp.h
deleted file mode 100644
index 31f515e499a7..000000000000
--- a/include/asm-sparc/bpp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _SPARC_BPP_H
-#define _SPARC_BPP_H
-
-/*
- * Copyright (c) 1995 Picture Elements
- *	Stephen Williams
- *	Gus Baldauf
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-#include  <linux/ioctl.h>
-
-/*
- * This is a driver that supports IEEE Std 1284-1994 communications
- * with compliant or compatible devices. It will use whatever features
- * the device supports, prefering those that are typically faster.
- *
- * When the device is opened, it is left in COMPATIBILITY mode, and
- * writes work like any printer device. The driver only attempt to
- * negotiate 1284 modes when needed so that plugs can be pulled,
- * switch boxes switched, etc., without disrupting things. It will
- * also leave the device in compatibility mode when closed.
- */
-
-
-
-/*
- * This driver also supplies ioctls to manually manipulate the
- * pins. This is great for testing devices, or writing code to deal
- * with bizzarro-mode of the ACME Special TurboThingy Plus.
- *
- * NOTE: These ioctl currently do not interact well with
- * read/write. Caveat emptor.
- *
- * PUT_PINS allows us to assign the sense of all the pins, including
- * the data pins if being driven by the host. The GET_PINS returns the
- * pins that the peripheral drives, including data if appropriate.
- */
-
-# define BPP_PUT_PINS _IOW('B', 1, int)
-# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
-# define BPP_PUT_DATA _IOW('B', 3, int)
-# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
-
-/*
- * Set the data bus to input mode. Disengage the data bin driver and
- * be prepared to read values from the peripheral. If the arg is 0,
- * then revert the bus to output mode.
- */
-# define BPP_SET_INPUT _IOW('B', 5, int)
-
-/*
- * These bits apply to the PUT operation...
- */
-# define BPP_PP_nStrobe   0x0001
-# define BPP_PP_nAutoFd   0x0002
-# define BPP_PP_nInit     0x0004
-# define BPP_PP_nSelectIn 0x0008
-
-/*
- * These apply to the GET operation, which also reads the current value
- * of the previously put values. A bit mask of these will be returned
- * as a bit mask in the return code of the ioctl().
- */
-# define BPP_GP_nAck   0x0100
-# define BPP_GP_Busy   0x0200
-# define BPP_GP_PError 0x0400
-# define BPP_GP_Select 0x0800
-# define BPP_GP_nFault 0x1000
-
-#endif
diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h
deleted file mode 100644
index 08277e6fb4cd..000000000000
--- a/include/asm-sparc/btfixup.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- *  asm-sparc/btfixup.h:    Macros for boot time linking.
- *
- *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
- 
-#ifndef _SPARC_BTFIXUP_H
-#define _SPARC_BTFIXUP_H
-
-#include <linux/init.h>
-
-#ifndef __ASSEMBLY__
-
-#ifdef MODULE
-extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
-extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
-extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
-extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
-
-#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
-#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
-#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
-#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
-#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
-
-#else
-
-#define BTFIXUP_SIMM13(__name) ___sf_##__name()
-#define BTFIXUP_HALF(__name) ___af_##__name()
-#define BTFIXUP_SETHI(__name) ___hf_##__name()
-#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
-/* This must be written in assembly and present in a sethi */
-#define BTFIXUP_BLACKBOX(__name) ___b_##__name
-#endif /* MODULE */
-
-/* Fixup call xx */
-
-#define BTFIXUPDEF_CALL(__type, __name, __args...) 					\
-	extern __type ___f_##__name(__args);						\
-	extern unsigned ___fs_##__name[3];
-#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) 				\
-	extern __type ___f_##__name(__args) __attribute_const__;			\
-	extern unsigned ___fs_##__name[3];
-#define BTFIXUP_CALL(__name) ___f_##__name
-
-#define BTFIXUPDEF_BLACKBOX(__name)							\
-	extern unsigned ___bs_##__name[2];
-
-/* Put bottom 13bits into some register variable */
-
-#define BTFIXUPDEF_SIMM13(__name)							\
-	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
-	extern unsigned ___ss_##__name[2];						\
-	static inline unsigned int ___sf_##__name(void) {				\
-		unsigned int ret;							\
-		__asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));			\
-		return ret;								\
-	}
-#define BTFIXUPDEF_SIMM13_INIT(__name,__val)						\
-	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
-	extern unsigned ___ss_##__name[2];						\
-	static inline unsigned int ___sf_##__name(void) {				\
-		unsigned int ret;							\
-		__asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
-		return ret;								\
-	}
-
-/* Put either bottom 13 bits, or upper 22 bits into some register variable
- * (depending on the value, this will lead into sethi FIX, reg; or
- * mov FIX, reg; )
- */
-
-#define BTFIXUPDEF_HALF(__name)								\
-	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
-	extern unsigned ___as_##__name[2];						\
-	static inline unsigned int ___af_##__name(void) {				\
-		unsigned int ret;							\
-		__asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));			\
-		return ret;								\
-	}
-#define BTFIXUPDEF_HALF_INIT(__name,__val)						\
-	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
-	extern unsigned ___as_##__name[2];						\
-	static inline unsigned int ___af_##__name(void) {				\
-		unsigned int ret;							\
-		__asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
-		return ret;								\
-	}
-
-/* Put upper 22 bits into some register variable */
-
-#define BTFIXUPDEF_SETHI(__name)							\
-	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
-	extern unsigned ___hs_##__name[2];						\
-	static inline unsigned int ___hf_##__name(void) {				\
-		unsigned int ret;							\
-		__asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));		\
-		return ret;								\
-	}
-#define BTFIXUPDEF_SETHI_INIT(__name,__val)						\
-	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
-	extern unsigned ___hs_##__name[2];						\
-	static inline unsigned int ___hf_##__name(void) {				\
-		unsigned int ret;							\
-		__asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : 	\
-			 "=r"(ret));							\
-		return ret;								\
-	}
-
-/* Put a full 32bit integer into some register variable */
-
-#define BTFIXUPDEF_INT(__name)								\
-	extern unsigned char ___i_##__name;						\
-	extern unsigned ___is_##__name[2];
-
-#define BTFIXUPCALL_NORM	0x00000000			/* Always call */
-#define BTFIXUPCALL_NOP		0x01000000			/* Possibly optimize to nop */
-#define BTFIXUPCALL_RETINT(i)	(0x90102000|((i) & 0x1fff))	/* Possibly optimize to mov i, %o0 */
-#define BTFIXUPCALL_ORINT(i)	(0x90122000|((i) & 0x1fff))	/* Possibly optimize to or %o0, i, %o0 */
-#define BTFIXUPCALL_RETO0	0x01000000			/* Return first parameter, actually a nop */
-#define BTFIXUPCALL_ANDNINT(i)	(0x902a2000|((i) & 0x1fff))	/* Possibly optimize to andn %o0, i, %o0 */
-#define BTFIXUPCALL_SWAPO0O1	0xd27a0000			/* Possibly optimize to swap [%o0],%o1 */
-#define BTFIXUPCALL_SWAPO0G0	0xc07a0000			/* Possibly optimize to swap [%o0],%g0 */
-#define BTFIXUPCALL_SWAPG1G2	0xc4784000			/* Possibly optimize to swap [%g1],%g2 */
-#define BTFIXUPCALL_STG0O0	0xc0220000			/* Possibly optimize to st %g0,[%o0] */
-#define BTFIXUPCALL_STO1O0	0xd2220000			/* Possibly optimize to st %o1,[%o0] */
-
-#define BTFIXUPSET_CALL(__name, __addr, __insn)						\
-	do {										\
-		___fs_##__name[0] |= 1;							\
-		___fs_##__name[1] = (unsigned long)__addr;				\
-		___fs_##__name[2] = __insn;						\
-	} while (0)
-	
-#define BTFIXUPSET_BLACKBOX(__name, __func)						\
-	do {										\
-		___bs_##__name[0] |= 1;							\
-		___bs_##__name[1] = (unsigned long)__func;				\
-	} while (0)
-	
-#define BTFIXUPCOPY_CALL(__name, __from)						\
-	do {										\
-		___fs_##__name[0] |= 1;							\
-		___fs_##__name[1] = ___fs_##__from[1];					\
-		___fs_##__name[2] = ___fs_##__from[2];					\
-	} while (0)
-		
-#define BTFIXUPSET_SIMM13(__name, __val)						\
-	do {										\
-		___ss_##__name[0] |= 1;							\
-		___ss_##__name[1] = (unsigned)__val;					\
-	} while (0)
-	
-#define BTFIXUPCOPY_SIMM13(__name, __from)						\
-	do {										\
-		___ss_##__name[0] |= 1;							\
-		___ss_##__name[1] = ___ss_##__from[1];					\
-	} while (0)
-		
-#define BTFIXUPSET_HALF(__name, __val)							\
-	do {										\
-		___as_##__name[0] |= 1;							\
-		___as_##__name[1] = (unsigned)__val;					\
-	} while (0)
-	
-#define BTFIXUPCOPY_HALF(__name, __from)						\
-	do {										\
-		___as_##__name[0] |= 1;							\
-		___as_##__name[1] = ___as_##__from[1];					\
-	} while (0)
-		
-#define BTFIXUPSET_SETHI(__name, __val)							\
-	do {										\
-		___hs_##__name[0] |= 1;							\
-		___hs_##__name[1] = (unsigned)__val;					\
-	} while (0)
-	
-#define BTFIXUPCOPY_SETHI(__name, __from)						\
-	do {										\
-		___hs_##__name[0] |= 1;							\
-		___hs_##__name[1] = ___hs_##__from[1];					\
-	} while (0)
-		
-#define BTFIXUPSET_INT(__name, __val)							\
-	do {										\
-		___is_##__name[0] |= 1;							\
-		___is_##__name[1] = (unsigned)__val;					\
-	} while (0)
-	
-#define BTFIXUPCOPY_INT(__name, __from)							\
-	do {										\
-		___is_##__name[0] |= 1;							\
-		___is_##__name[1] = ___is_##__from[1];					\
-	} while (0)
-	
-#define BTFIXUPVAL_CALL(__name)								\
-	((unsigned long)___fs_##__name[1])
-	
-extern void btfixup(void);
-
-#else /* __ASSEMBLY__ */
-
-#define BTFIXUP_SETHI(__name)			%hi(___h_ ## __name)
-#define BTFIXUP_SETHI_INIT(__name,__val)	%hi(___h_ ## __name ## __btset_ ## __val)
-
-#endif /* __ASSEMBLY__ */
-	
-#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/include/asm-sparc/bug.h b/include/asm-sparc/bug.h
deleted file mode 100644
index 8a59e5a8c217..000000000000
--- a/include/asm-sparc/bug.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _SPARC_BUG_H
-#define _SPARC_BUG_H
-
-#ifdef CONFIG_BUG
-#include <linux/compiler.h>
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-extern void do_BUG(const char *file, int line);
-#define BUG() do {					\
-	do_BUG(__FILE__, __LINE__);			\
-	__builtin_trap();				\
-} while (0)
-#else
-#define BUG()		__builtin_trap()
-#endif
-
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/include/asm-sparc/bugs.h b/include/asm-sparc/bugs.h
deleted file mode 100644
index 2dfc07bc8e54..000000000000
--- a/include/asm-sparc/bugs.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* include/asm-sparc/bugs.h:  Sparc probes for various bugs.
- *
- * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifdef CONFIG_SPARC32
-#include <asm/cpudata.h>
-#endif
-
-#ifdef CONFIG_SPARC64
-#include <asm/sstate.h>
-#endif
-
-extern unsigned long loops_per_jiffy;
-
-static void __init check_bugs(void)
-{
-#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
-	cpu_data(0).udelay_val = loops_per_jiffy;
-#endif
-#ifdef CONFIG_SPARC64
-	sstate_running();
-#endif
-}
diff --git a/include/asm-sparc/byteorder.h b/include/asm-sparc/byteorder.h
deleted file mode 100644
index bcd83aa351c5..000000000000
--- a/include/asm-sparc/byteorder.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _SPARC_BYTEORDER_H
-#define _SPARC_BYTEORDER_H
-
-#include <asm/types.h>
-#include <asm/asi.h>
-
-#ifdef __GNUC__
-
-#ifdef CONFIG_SPARC32
-#define __SWAB_64_THRU_32__
-#endif
-
-#ifdef CONFIG_SPARC64
-
-static inline __u16 ___arch__swab16p(const __u16 *addr)
-{
-	__u16 ret;
-
-	__asm__ __volatile__ ("lduha [%1] %2, %0"
-			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
-	return ret;
-}
-
-static inline __u32 ___arch__swab32p(const __u32 *addr)
-{
-	__u32 ret;
-
-	__asm__ __volatile__ ("lduwa [%1] %2, %0"
-			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
-	return ret;
-}
-
-static inline __u64 ___arch__swab64p(const __u64 *addr)
-{
-	__u64 ret;
-
-	__asm__ __volatile__ ("ldxa [%1] %2, %0"
-			      : "=r" (ret)
-			      : "r" (addr), "i" (ASI_PL));
-	return ret;
-}
-
-#define __arch__swab16p(x) ___arch__swab16p(x)
-#define __arch__swab32p(x) ___arch__swab32p(x)
-#define __arch__swab64p(x) ___arch__swab64p(x)
-
-#endif /* CONFIG_SPARC64 */
-
-#define __BYTEORDER_HAS_U64__
-
-#endif
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _SPARC_BYTEORDER_H */
diff --git a/include/asm-sparc/cache.h b/include/asm-sparc/cache.h
deleted file mode 100644
index 41f85ae4bd4a..000000000000
--- a/include/asm-sparc/cache.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* cache.h:  Cache specific code for the Sparc.  These include flushing
- *           and direct tag/data line access.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC_CACHE_H
-#define _SPARC_CACHE_H
-
-#define L1_CACHE_SHIFT 5
-#define L1_CACHE_BYTES 32
-#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
-
-#ifdef CONFIG_SPARC32
-#define SMP_CACHE_BYTES_SHIFT 5
-#else
-#define SMP_CACHE_BYTES_SHIFT 6
-#endif
-
-#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
-
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
-#ifdef CONFIG_SPARC32
-#include <asm/asi.h>
-
-/* Direct access to the instruction cache is provided through and
- * alternate address space.  The IDC bit must be off in the ICCR on
- * HyperSparcs for these accesses to work.  The code below does not do
- * any checking, the caller must do so.  These routines are for
- * diagnostics only, but could end up being useful.  Use with care.
- * Also, you are asking for trouble if you execute these in one of the
- * three instructions following a %asr/%psr access or modification.
- */
-
-/* First, cache-tag access. */
-static inline unsigned int get_icache_tag(int setnum, int tagnum)
-{
-	unsigned int vaddr, retval;
-
-	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (retval) :
-			     "r" (vaddr), "i" (ASI_M_TXTC_TAG));
-	return retval;
-}
-
-static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry)
-{
-	unsigned int vaddr;
-
-	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
-	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
-			     "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
-			     "memory");
-}
-
-/* Second cache-data access.  The data is returned two-32bit quantities
- * at a time.
- */
-static inline void get_icache_data(int setnum, int tagnum, int subblock,
-				       unsigned int *data)
-{
-	unsigned int value1, value2, vaddr;
-
-	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
-		((subblock&0x3) << 3);
-	__asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
-			     "or %%g0, %%g2, %0\n\t"
-			     "or %%g0, %%g3, %1\n\t" :
-			     "=r" (value1), "=r" (value2) :
-			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
-			     "g2", "g3");
-	data[0] = value1; data[1] = value2;
-}
-
-static inline void put_icache_data(int setnum, int tagnum, int subblock,
-				       unsigned int *data)
-{
-	unsigned int value1, value2, vaddr;
-
-	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
-		((subblock&0x3) << 3);
-	value1 = data[0]; value2 = data[1];
-	__asm__ __volatile__("or %%g0, %0, %%g2\n\t"
-			     "or %%g0, %1, %%g3\n\t"
-			     "stda %%g2, [%2] %3\n\t" : :
-			     "r" (value1), "r" (value2), 
-			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
-			     "g2", "g3", "memory" /* no joke */);
-}
-
-/* Different types of flushes with the ICACHE.  Some of the flushes
- * affect both the ICACHE and the external cache.  Others only clear
- * the ICACHE entries on the cpu itself.  V8's (most) allow
- * granularity of flushes on the packet (element in line), whole line,
- * and entire cache (ie. all lines) level.  The ICACHE only flushes are
- * ROSS HyperSparc specific and are in ross.h
- */
-
-/* Flushes which clear out both the on-chip and external caches */
-static inline void flush_ei_page(unsigned int addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
-			     "memory");
-}
-
-static inline void flush_ei_seg(unsigned int addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (addr), "i" (ASI_M_FLUSH_SEG) :
-			     "memory");
-}
-
-static inline void flush_ei_region(unsigned int addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (addr), "i" (ASI_M_FLUSH_REGION) :
-			     "memory");
-}
-
-static inline void flush_ei_ctx(unsigned int addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (addr), "i" (ASI_M_FLUSH_CTX) :
-			     "memory");
-}
-
-static inline void flush_ei_user(unsigned int addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (addr), "i" (ASI_M_FLUSH_USER) :
-			     "memory");
-}
-#endif /* CONFIG_SPARC32 */
-
-#endif /* !(_SPARC_CACHE_H) */
diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h
deleted file mode 100644
index 68ac10910271..000000000000
--- a/include/asm-sparc/cacheflush.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef _SPARC_CACHEFLUSH_H
-#define _SPARC_CACHEFLUSH_H
-
-#include <linux/mm.h>		/* Common for other includes */
-// #include <linux/kernel.h> from pgalloc.h
-// #include <linux/sched.h>  from pgalloc.h
-
-// #include <asm/page.h>
-#include <asm/btfixup.h>
-
-/*
- * Fine grained cache flushing.
- */
-#ifdef CONFIG_SMP
-
-BTFIXUPDEF_CALL(void, local_flush_cache_all, void)
-BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *)
-BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
-BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long)
-
-#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)()
-#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm)
-#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end)
-#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr)
-
-BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long)
-BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long)
-
-#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr)
-#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr)
-
-extern void smp_flush_cache_all(void);
-extern void smp_flush_cache_mm(struct mm_struct *mm);
-extern void smp_flush_cache_range(struct vm_area_struct *vma,
-				  unsigned long start,
-				  unsigned long end);
-extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page);
-
-extern void smp_flush_page_to_ram(unsigned long page);
-extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr);
-
-#endif /* CONFIG_SMP */
-
-BTFIXUPDEF_CALL(void, flush_cache_all, void)
-BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *)
-BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
-BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long)
-
-#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
-#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
-#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
-#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
-#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma, pg)		do { } while (0)
-
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-	} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-	} while (0)
-
-BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long)
-BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
-
-#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr)
-#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr)
-
-extern void sparc_flush_page_to_ram(struct page *page);
-
-#define flush_dcache_page(page)			sparc_flush_page_to_ram(page)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
-
-#endif /* _SPARC_CACHEFLUSH_H */
diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h
deleted file mode 100644
index d044ddb5a3cf..000000000000
--- a/include/asm-sparc/checksum.h
+++ /dev/null
@@ -1,241 +0,0 @@
-#ifndef __SPARC_CHECKSUM_H
-#define __SPARC_CHECKSUM_H
-
-/*  checksum.h:  IP/UDP/TCP checksum routines on the Sparc.
- *
- *  Copyright(C) 1995 Linus Torvalds
- *  Copyright(C) 1995 Miguel de Icaza
- *  Copyright(C) 1996 David S. Miller
- *  Copyright(C) 1996 Eddie C. Dost
- *  Copyright(C) 1997 Jakub Jelinek
- *
- * derived from:
- *	Alpha checksum c-code
- *      ix86 inline assembly
- *      RFC1071 Computing the Internet Checksum
- */
- 
-#include <linux/in6.h>
-#include <asm/uaccess.h>
-
-/* computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/* the same as csum_partial, but copies from fs:src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *);
-
-static inline __wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
-	register unsigned int ret asm("o0") = (unsigned int)src;
-	register char *d asm("o1") = dst;
-	register int l asm("g1") = len;
-
-	__asm__ __volatile__ (
-		"call __csum_partial_copy_sparc_generic\n\t"
-		" mov %6, %%g7\n"
-	: "=&r" (ret), "=&r" (d), "=&r" (l)
-	: "0" (ret), "1" (d), "2" (l), "r" (sum)
-	: "o2", "o3", "o4", "o5", "o7",
-	  "g2", "g3", "g4", "g5", "g7",
-	  "memory", "cc");
-	return (__force __wsum)ret;
-}
-
-static inline __wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-			    __wsum sum, int *err)
-  {
-	register unsigned long ret asm("o0") = (unsigned long)src;
-	register char *d asm("o1") = dst;
-	register int l asm("g1") = len;
-	register __wsum s asm("g7") = sum;
-
-	__asm__ __volatile__ (
-	".section __ex_table,#alloc\n\t"
-	".align 4\n\t"
-	".word 1f,2\n\t"
-	".previous\n"
-	"1:\n\t"
-	"call __csum_partial_copy_sparc_generic\n\t"
-	" st %8, [%%sp + 64]\n"
-	: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
-	: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
-	: "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5",
-	  "cc", "memory");
-	return (__force __wsum)ret;
-}
-  
-static inline __wsum
-csum_partial_copy_to_user(const void *src, void __user *dst, int len,
-			  __wsum sum, int *err)
-{
-	if (!access_ok (VERIFY_WRITE, dst, len)) {
-		*err = -EFAULT;
-		return sum;
-	} else {
-		register unsigned long ret asm("o0") = (unsigned long)src;
-		register char __user *d asm("o1") = dst;
-		register int l asm("g1") = len;
-		register __wsum s asm("g7") = sum;
-
-		__asm__ __volatile__ (
-		".section __ex_table,#alloc\n\t"
-		".align 4\n\t"
-		".word 1f,1\n\t"
-		".previous\n"
-		"1:\n\t"
-		"call __csum_partial_copy_sparc_generic\n\t"
-		" st %8, [%%sp + 64]\n"
-		: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
-		: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
-		: "o2", "o3", "o4", "o5", "o7",
-		  "g2", "g3", "g4", "g5",
-		  "cc", "memory");
-		return (__force __wsum)ret;
-	}
-}
-
-#define HAVE_CSUM_COPY_USER
-#define csum_and_copy_to_user csum_partial_copy_to_user
-
-/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
- * the majority of the time.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	__sum16 sum;
-
-	/* Note: We must read %2 before we touch %0 for the first time,
-	 *       because GCC can legitimately use the same register for
-	 *       both operands.
-	 */
-	__asm__ __volatile__("sub\t%2, 4, %%g4\n\t"
-			     "ld\t[%1 + 0x00], %0\n\t"
-			     "ld\t[%1 + 0x04], %%g2\n\t"
-			     "ld\t[%1 + 0x08], %%g3\n\t"
-			     "addcc\t%%g2, %0, %0\n\t"
-			     "addxcc\t%%g3, %0, %0\n\t"
-			     "ld\t[%1 + 0x0c], %%g2\n\t"
-			     "ld\t[%1 + 0x10], %%g3\n\t"
-			     "addxcc\t%%g2, %0, %0\n\t"
-			     "addx\t%0, %%g0, %0\n"
-			     "1:\taddcc\t%%g3, %0, %0\n\t"
-			     "add\t%1, 4, %1\n\t"
-			     "addxcc\t%0, %%g0, %0\n\t"
-			     "subcc\t%%g4, 1, %%g4\n\t"
-			     "be,a\t2f\n\t"
-			     "sll\t%0, 16, %%g2\n\t"
-			     "b\t1b\n\t"
-			     "ld\t[%1 + 0x10], %%g3\n"
-			     "2:\taddcc\t%0, %%g2, %%g2\n\t"
-			     "srl\t%%g2, 16, %0\n\t"
-			     "addx\t%0, %%g0, %0\n\t"
-			     "xnor\t%%g0, %0, %0"
-			     : "=r" (sum), "=&r" (iph)
-			     : "r" (ihl), "1" (iph)
-			     : "g2", "g3", "g4", "cc", "memory");
-	return sum;
-}
-
-/* Fold a partial checksum without adding pseudo headers. */
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp;
-
-	__asm__ __volatile__("addcc\t%0, %1, %1\n\t"
-			     "srl\t%1, 16, %1\n\t"
-			     "addx\t%1, %%g0, %1\n\t"
-			     "xnor\t%%g0, %1, %0"
-			     : "=&r" (sum), "=r" (tmp)
-			     : "0" (sum), "1" ((__force u32)sum<<16)
-			     : "cc");
-	return (__force __sum16)sum;
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					       unsigned short len,
-					       unsigned short proto,
-					       __wsum sum)
-{
-	__asm__ __volatile__("addcc\t%1, %0, %0\n\t"
-			     "addxcc\t%2, %0, %0\n\t"
-			     "addxcc\t%3, %0, %0\n\t"
-			     "addx\t%0, %%g0, %0\n\t"
-			     : "=r" (sum), "=r" (saddr)
-			     : "r" (daddr), "r" (proto + len), "0" (sum),
-			       "1" (saddr)
-			     : "cc");
-	return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
-{
-	__asm__ __volatile__ (
-		"addcc	%3, %4, %%g4\n\t"
-		"addxcc	%5, %%g4, %%g4\n\t"
-		"ld	[%2 + 0x0c], %%g2\n\t"
-		"ld	[%2 + 0x08], %%g3\n\t"
-		"addxcc	%%g2, %%g4, %%g4\n\t"
-		"ld	[%2 + 0x04], %%g2\n\t"
-		"addxcc	%%g3, %%g4, %%g4\n\t"
-		"ld	[%2 + 0x00], %%g3\n\t"
-		"addxcc	%%g2, %%g4, %%g4\n\t"
-		"ld	[%1 + 0x0c], %%g2\n\t"
-		"addxcc	%%g3, %%g4, %%g4\n\t"
-		"ld	[%1 + 0x08], %%g3\n\t"
-		"addxcc	%%g2, %%g4, %%g4\n\t"
-		"ld	[%1 + 0x04], %%g2\n\t"
-		"addxcc	%%g3, %%g4, %%g4\n\t"
-		"ld	[%1 + 0x00], %%g3\n\t"
-		"addxcc	%%g2, %%g4, %%g4\n\t"
-		"addxcc	%%g3, %%g4, %0\n\t"
-		"addx	0, %0, %0\n"
-		: "=&r" (sum)
-		: "r" (saddr), "r" (daddr), 
-		  "r"(htonl(len)), "r"(htonl(proto)), "r"(sum)
-		: "g2", "g3", "g4", "cc");
-
-	return csum_fold(sum);
-}
-
-/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#endif /* !(__SPARC_CHECKSUM_H) */
diff --git a/include/asm-sparc/clock.h b/include/asm-sparc/clock.h
deleted file mode 100644
index 2cf99dadec56..000000000000
--- a/include/asm-sparc/clock.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * clock.h:  Definitions for clock operations on the Sparc.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_CLOCK_H
-#define _SPARC_CLOCK_H
-
-/* Foo for now. */
-
-#endif /* !(_SPARC_CLOCK_H) */
diff --git a/include/asm-sparc/contregs.h b/include/asm-sparc/contregs.h
deleted file mode 100644
index 48fa8a4ef357..000000000000
--- a/include/asm-sparc/contregs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _SPARC_CONTREGS_H
-#define _SPARC_CONTREGS_H
-
-/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
- *              space. These are for the mmu's context register, etc.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* 3=sun3
-   4=sun4 (as in sun4 sysmaint student book)
-   c=sun4c (according to davem) */
-
-#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
-#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
-#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
-#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
-#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
-#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
-#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
-#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
-#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
-#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
-#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
-#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
-#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
-#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
-#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
-#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
-#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
-
-/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
-#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
-#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
-#define AC_M_CXR      0x0200        /* shv Context Register                  */
-#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
-#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
-#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
-#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
-#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
-#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
-#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
-#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
-#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
-#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
-#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
-#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
-#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
-#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
-#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
-#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
-
-#endif /* _SPARC_CONTREGS_H */
diff --git a/include/asm-sparc/cpudata.h b/include/asm-sparc/cpudata.h
deleted file mode 100644
index a2c4d51d36c4..000000000000
--- a/include/asm-sparc/cpudata.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* cpudata.h: Per-cpu parameters.
- *
- * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
- *
- * Based on include/asm-sparc64/cpudata.h and Linux 2.4 smp.h
- * both (C) David S. Miller.
- */
-
-#ifndef _SPARC_CPUDATA_H
-#define _SPARC_CPUDATA_H
-
-#include <linux/percpu.h>
-
-typedef struct {
-	unsigned long udelay_val;
-	unsigned long clock_tick;
-	unsigned int multiplier;
-	unsigned int counter;
-	int prom_node;
-	int mid;
-	int next;
-} cpuinfo_sparc;
-
-DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
-#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
-
-#endif /* _SPARC_CPUDATA_H */
diff --git a/include/asm-sparc/cputime.h b/include/asm-sparc/cputime.h
deleted file mode 100644
index 1a642b81e019..000000000000
--- a/include/asm-sparc/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SPARC_CPUTIME_H
-#define __SPARC_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SPARC_CPUTIME_H */
diff --git a/include/asm-sparc/current.h b/include/asm-sparc/current.h
deleted file mode 100644
index 8a1d9d6643b0..000000000000
--- a/include/asm-sparc/current.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* include/asm-sparc/current.h
- *
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
- * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
- *
- *  Derived from "include/asm-s390/current.h" by
- *  Martin Schwidefsky (schwidefsky@de.ibm.com)
- *  Derived from "include/asm-i386/current.h"
-*/
-#ifndef _SPARC_CURRENT_H
-#define _SPARC_CURRENT_H
-
-#include <linux/thread_info.h>
-
-#ifdef CONFIG_SPARC64
-register struct task_struct *current asm("g4");
-#endif
-
-#ifdef CONFIG_SPARC32
-/* We might want to consider using %g4 like sparc64 to shave a few cycles.
- *
- * Two stage process (inline + #define) for type-checking.
- * We also obfuscate get_current() to check if anyone used that by mistake.
- */
-struct task_struct;
-static inline struct task_struct *__get_current(void)
-{
-	return current_thread_info()->task;
-}
-#define current __get_current()
-#endif
-
-#endif /* !(_SPARC_CURRENT_H) */
diff --git a/include/asm-sparc/cypress.h b/include/asm-sparc/cypress.h
deleted file mode 100644
index 95e9772ea394..000000000000
--- a/include/asm-sparc/cypress.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * cypress.h: Cypress module specific definitions and defines.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_CYPRESS_H
-#define _SPARC_CYPRESS_H
-
-/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
-
-/* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
- *
- * ---------------------------------------------------------------
- * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
- * ---------------------------------------------------------------
- *  31    24 23-22 21-20 19 18-15 14 13  12 11 10  9  8 7-2  1  0
- *
- * MCA: MultiChip Access -- Used for configuration of multiple
- *      CY7C604/605 cache units.
- * MCM: MultiChip Mask -- Again, for multiple cache unit config.
- * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
- * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
- * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
- * C: Cacheable -- Indicates whether accesses are cacheable while
- *    the MMU is off.  0=no 1=yes
- * MR: MemoryReflection -- Indicates whether the bus attached to the
- *     MBus supports memory reflection. 0=no 1=yes (605 only)
- * CM: CacheMode -- Indicates whether the cache is operating in write
- *     through or copy-back mode. 0=write-through 1=copy-back
- * CL: CacheLock -- Indicates if the entire cache is locked or not.
- *     0=not-locked 1=locked  (604 only)
- * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
- * NF: NoFault -- Do faults generate traps? 0=yes 1=no
- * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
- */
-
-#define CYPRESS_MCA       0x00c00000
-#define CYPRESS_MCM       0x00300000
-#define CYPRESS_MVALID    0x00080000
-#define CYPRESS_MIDMASK   0x00078000   /* Only on 605 */
-#define CYPRESS_BMODE     0x00004000
-#define CYPRESS_ACENABLE  0x00002000
-#define CYPRESS_MRFLCT    0x00000800   /* Only on 605 */
-#define CYPRESS_CMODE     0x00000400
-#define CYPRESS_CLOCK     0x00000200   /* Only on 604 */
-#define CYPRESS_CENABLE   0x00000100
-#define CYPRESS_NFAULT    0x00000002
-#define CYPRESS_MENABLE   0x00000001
-
-static inline void cypress_flush_page(unsigned long page)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (page), "i" (ASI_M_FLUSH_PAGE));
-}
-
-static inline void cypress_flush_segment(unsigned long addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (addr), "i" (ASI_M_FLUSH_SEG));
-}
-
-static inline void cypress_flush_region(unsigned long addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
-			     "r" (addr), "i" (ASI_M_FLUSH_REGION));
-}
-
-static inline void cypress_flush_context(void)
-{
-	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
-			     "i" (ASI_M_FLUSH_CTX));
-}
-
-/* XXX Displacement flushes for buggy chips and initial testing
- * XXX go here.
- */
-
-#endif /* !(_SPARC_CYPRESS_H) */
diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h
deleted file mode 100644
index bc9aba2bead6..000000000000
--- a/include/asm-sparc/delay.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * delay.h: Linux delay routines on the Sparc.
- *
- * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
- */
-
-#ifndef __SPARC_DELAY_H
-#define __SPARC_DELAY_H
-
-#include <asm/cpudata.h>
-
-static inline void __delay(unsigned long loops)
-{
-	__asm__ __volatile__("cmp %0, 0\n\t"
-			     "1: bne 1b\n\t"
-			     "subcc %0, 1, %0\n" :
-			     "=&r" (loops) :
-			     "0" (loops) :
-			     "cc");
-}
-
-/* This is too messy with inline asm on the Sparc. */
-extern void __udelay(unsigned long usecs, unsigned long lpj);
-extern void __ndelay(unsigned long nsecs, unsigned long lpj);
-
-#ifdef CONFIG_SMP
-#define __udelay_val	cpu_data(smp_processor_id()).udelay_val
-#else /* SMP */
-#define __udelay_val	loops_per_jiffy
-#endif /* SMP */
-#define udelay(__usecs)	__udelay(__usecs, __udelay_val)
-#define ndelay(__nsecs)	__ndelay(__nsecs, __udelay_val)
-
-#endif /* defined(__SPARC_DELAY_H) */
diff --git a/include/asm-sparc/device.h b/include/asm-sparc/device.h
deleted file mode 100644
index 19790eb99cc6..000000000000
--- a/include/asm-sparc/device.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#ifndef _ASM_SPARC_DEVICE_H
-#define _ASM_SPARC_DEVICE_H
-
-struct device_node;
-struct of_device;
-
-struct dev_archdata {
-	void			*iommu;
-	void			*stc;
-	void			*host_controller;
-
-	struct device_node	*prom_node;
-	struct of_device	*op;
-
-	int			numa_node;
-};
-
-#endif /* _ASM_SPARC_DEVICE_H */
diff --git a/include/asm-sparc/div64.h b/include/asm-sparc/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-sparc/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h
deleted file mode 100644
index f3a641e6b2c8..000000000000
--- a/include/asm-sparc/dma-mapping.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_SPARC_DMA_MAPPING_H
-#define _ASM_SPARC_DMA_MAPPING_H
-
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif /* PCI */
-
-#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h
deleted file mode 100644
index 959d6c8a71ae..000000000000
--- a/include/asm-sparc/dma.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/* include/asm-sparc/dma.h
- *
- * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _ASM_SPARC_DMA_H
-#define _ASM_SPARC_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/vac-ops.h>  /* for invalidate's, etc. */
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <linux/spinlock.h>
-
-struct page;
-extern spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define MAX_DMA_ADDRESS  (~0UL)
-#define DMA_MODE_READ    1
-#define DMA_MODE_WRITE   2
-
-/* Useful constants */
-#define SIZE_16MB      (16*1024*1024)
-#define SIZE_64K       (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
-#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
-#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
-#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
-
-/* DVMA chip revisions */
-enum dvma_rev {
-	dvmarev0,
-	dvmaesc1,
-	dvmarev1,
-	dvmarev2,
-	dvmarev3,
-	dvmarevplus,
-	dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
-	struct sbus_dma *next;
-	struct sbus_dev *sdev;
-	void __iomem *regs;
-
-	/* Status, misc info */
-	int node;                /* Prom node for this DMA device */
-	int running;             /* Are we doing DMA now? */
-	int allocated;           /* Are we "owned" by anyone yet? */
-
-	/* Transfer information. */
-	unsigned long addr;      /* Start address of current transfer */
-	int nbytes;              /* Size of current transfer */
-	int realbytes;           /* For splitting up large transfers, etc. */
-
-	/* DMA revision */
-	enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#ifdef CONFIG_SUN4
-/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
- * Or is rev0 present only on sun4 boxes? -jj */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
-#else
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#endif
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
-#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
-#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
-#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
-#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
-#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
-#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
-#define DMA_BEGINDMA_W(regs) \
-        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
-#define DMA_BEGINDMA_R(regs) \
-        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-#if 0	/* P3 this stuff is inline in ledma.c:init_restart_ledma() */
-/* Pause until counter runs out or BIT isn't set in the DMA condition
- * register.
- */
-static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
-				       unsigned long bit)
-{
-	int ctr = 50000;   /* Let's find some bugs ;) */
-
-	/* Busy wait until the bit is not set any more */
-	while((regs->cond_reg&bit) && (ctr>0)) {
-		ctr--;
-		__delay(5);
-	}
-
-	/* Check for bogus outcome. */
-	if(!ctr)
-		panic("DMA timeout");
-}
-
-/* Reset the friggin' thing... */
-#define DMA_RESET(dma) do { \
-	struct sparc_dma_registers *regs = dma->regs;                      \
-	/* Let the current FIFO drain itself */                            \
-	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
-	/* Reset the logic */                                              \
-	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
-	__delay(400);                         /* let the bits set ;) */    \
-	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
-	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
-	/* Enable FAST transfers if available */                           \
-	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
-	dma->running = 0;                                                  \
-} while(0)
-#endif
-
-#define for_each_dvma(dma) \
-        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-extern int get_dma_list(char *);
-extern int request_dma(unsigned int, __const__ char *);
-extern void free_dma(unsigned int);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	(0)
-#endif
-
-/* Routines for data transfer buffers. */
-BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
-BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
-
-#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
-#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
-
-/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
-BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
-BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
-
-#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
-#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
-#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
-#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
-
-/*
- * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
- *
- * The mmu_map_dma_area establishes two mappings in one go.
- * These mappings point to pages normally mapped at 'va' (linear address).
- * First mapping is for CPU visible address at 'a', uncached.
- * This is an alias, but it works because it is an uncached mapping.
- * Second mapping is for device visible address, or "bus" address.
- * The bus address is returned at '*pba'.
- *
- * These functions seem distinct, but are hard to split. On sun4c,
- * at least for now, 'a' is equal to bus address, and retured in *pba.
- * On sun4m, page attributes depend on the CPU type, so we have to
- * know if we are mapping RAM or I/O, so it has to be an additional argument
- * to a separate mapping function for CPU visible mappings.
- */
-BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
-BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
-BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
-
-#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
-#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
-#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
-
-#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h
deleted file mode 100644
index 491f85d662df..000000000000
--- a/include/asm-sparc/ebus.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * ebus.h: PCI to Ebus pseudo driver software state.
- *
- * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) 
- *
- * Adopted for sparc by V. Roganov and G. Raiko.
- */
-
-#ifndef __SPARC_EBUS_H
-#define __SPARC_EBUS_H
-
-#ifndef _LINUX_IOPORT_H
-#include <linux/ioport.h>
-#endif
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-
-struct linux_ebus_child {
-	struct linux_ebus_child		*next;
-	struct linux_ebus_device	*parent;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-
-struct linux_ebus_device {
-	struct of_device		ofdev;
-	struct linux_ebus_device	*next;
-	struct linux_ebus_child		*children;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
-
-struct linux_ebus {
-	struct of_device		ofdev;
-	struct linux_ebus		*next;
-	struct linux_ebus_device	*devices;
-	struct linux_pbm_info		*parent;
-	struct pci_dev			*self;
-	struct device_node		*prom_node;
-};
-#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
-
-struct linux_ebus_dma {
-	unsigned int dcsr;
-	unsigned int dacr;
-	unsigned int dbcr;
-};
-
-#define EBUS_DCSR_INT_PEND	0x00000001
-#define EBUS_DCSR_ERR_PEND	0x00000002
-#define EBUS_DCSR_DRAIN		0x00000004
-#define EBUS_DCSR_INT_EN	0x00000010
-#define EBUS_DCSR_RESET		0x00000080
-#define EBUS_DCSR_WRITE		0x00000100
-#define EBUS_DCSR_EN_DMA	0x00000200
-#define EBUS_DCSR_CYC_PEND	0x00000400
-#define EBUS_DCSR_DIAG_RD_DONE	0x00000800
-#define EBUS_DCSR_DIAG_WR_DONE	0x00001000
-#define EBUS_DCSR_EN_CNT	0x00002000
-#define EBUS_DCSR_TC		0x00004000
-#define EBUS_DCSR_DIS_CSR_DRN	0x00010000
-#define EBUS_DCSR_BURST_SZ_MASK	0x000c0000
-#define EBUS_DCSR_BURST_SZ_1	0x00080000
-#define EBUS_DCSR_BURST_SZ_4	0x00000000
-#define EBUS_DCSR_BURST_SZ_8	0x00040000
-#define EBUS_DCSR_BURST_SZ_16	0x000c0000
-#define EBUS_DCSR_DIAG_EN	0x00100000
-#define EBUS_DCSR_DIS_ERR_PEND	0x00400000
-#define EBUS_DCSR_TCI_DIS	0x00800000
-#define EBUS_DCSR_EN_NEXT	0x01000000
-#define EBUS_DCSR_DMA_ON	0x02000000
-#define EBUS_DCSR_A_LOADED	0x04000000
-#define EBUS_DCSR_NA_LOADED	0x08000000
-#define EBUS_DCSR_DEV_ID_MASK	0xf0000000
-
-extern struct linux_ebus		*ebus_chain;
-
-extern void ebus_init(void);
-
-#define for_each_ebus(bus)						\
-        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
-
-#define for_each_ebusdev(dev, bus)					\
-        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
-
-#define for_each_edevchild(dev, child)					\
-        for((child) = (dev)->children; (child); (child) = (child)->next)
-
-#endif /* !(__SPARC_EBUS_H) */
diff --git a/include/asm-sparc/ecc.h b/include/asm-sparc/ecc.h
deleted file mode 100644
index ccb84b66fef1..000000000000
--- a/include/asm-sparc/ecc.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * ecc.h: Definitions and defines for the external cache/memory
- *        controller on the sun4m.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_ECC_H
-#define _SPARC_ECC_H
-
-/* These registers are accessed through the SRMMU passthrough ASI 0x20 */
-#define ECC_ENABLE     0x00000000       /* ECC enable register */
-#define ECC_FSTATUS    0x00000008       /* ECC fault status register */
-#define ECC_FADDR      0x00000010       /* ECC fault address register */
-#define ECC_DIGNOSTIC  0x00000018       /* ECC diagnostics register */
-#define ECC_MBAENAB    0x00000020       /* MBus arbiter enable register */
-#define ECC_DMESG      0x00001000       /* Diagnostic message passing area */
-
-/* ECC MBus Arbiter Enable register:
- *
- * ----------------------------------------
- * |              |SBUS|MOD3|MOD2|MOD1|RSV|
- * ----------------------------------------
- *  31           5   4   3    2    1    0
- *
- * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on
- * MOD3: Enable MBus Arbiter on MBus module 3  0=off 1=on
- * MOD2: Enable MBus Arbiter on MBus module 2  0=off 1=on
- * MOD1: Enable MBus Arbiter on MBus module 1  0=off 1=on
- */
-
-#define ECC_MBAE_SBUS     0x00000010
-#define ECC_MBAE_MOD3     0x00000008
-#define ECC_MBAE_MOD2     0x00000004
-#define ECC_MBAE_MOD1     0x00000002 
-
-/* ECC Fault Control Register layout:
- *
- * -----------------------------
- * |    RESV   | ECHECK | EINT |
- * -----------------------------
- *  31        2     1       0
- *
- * ECHECK:  Enable ECC checking.  0=off 1=on
- * EINT:  Enable Interrupts for correctable errors. 0=off 1=on
- */ 
-#define ECC_FCR_CHECK    0x00000002
-#define ECC_FCR_INTENAB  0x00000001
-
-/* ECC Fault Address Register Zero layout:
- *
- * -----------------------------------------------------
- * | MID | S | RSV |  VA   | BM |AT| C| SZ |TYP| PADDR |
- * -----------------------------------------------------
- *  31-28  27 26-22  21-14   13  12 11 10-8 7-4   3-0
- *
- * MID: ModuleID of the faulting processor. ie. who did it?
- * S: Supervisor/Privileged access? 0=no 1=yes
- * VA: Bits 19-12 of the virtual faulting address, these are the
- *     superset bits in the virtual cache and can be used for
- *     a flush operation if necessary.
- * BM: Boot mode? 0=no 1=yes  This is just like the SRMMU boot
- *     mode bit.
- * AT: Did this fault happen during an atomic instruction? 0=no
- *     1=yes.  This means either an 'ldstub' or 'swap' instruction
- *     was in progress (but not finished) when this fault happened.
- *     This indicated whether the bus was locked when the fault
- *     occurred.
- * C: Did the pte for this access indicate that it was cacheable?
- *    0=no 1=yes
- * SZ: The size of the transaction.
- * TYP: The transaction type.
- * PADDR: Bits 35-32 of the physical address for the fault.
- */
-#define ECC_FADDR0_MIDMASK   0xf0000000
-#define ECC_FADDR0_S         0x08000000
-#define ECC_FADDR0_VADDR     0x003fc000
-#define ECC_FADDR0_BMODE     0x00002000
-#define ECC_FADDR0_ATOMIC    0x00001000
-#define ECC_FADDR0_CACHE     0x00000800
-#define ECC_FADDR0_SIZE      0x00000700
-#define ECC_FADDR0_TYPE      0x000000f0
-#define ECC_FADDR0_PADDR     0x0000000f
-
-/* ECC Fault Address Register One layout:
- *
- * -------------------------------------
- * |          Physical Address 31-0    |
- * -------------------------------------
- *  31                               0
- *
- * You get the upper 4 bits of the physical address from the
- * PADDR field in ECC Fault Address Zero register.
- */
-
-/* ECC Fault Status Register layout:
- *
- * ----------------------------------------------
- * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C|
- * ----------------------------------------------
- *  31-18  17  16    15-8    7-4   3    2    1 0
- *
- * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
- * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes)
- * SYNDROME: Controller is mentally unstable.
- * DWORD:
- * UNC: Uncorrectable error.  0=no 1=yes
- * TIMEO: Timeout occurred. 0=no 1=yes
- * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
- * C: Correctable error? 0=no 1=yes
- */
-
-#define ECC_FSR_C2ERR    0x00020000
-#define ECC_FSR_MULT     0x00010000
-#define ECC_FSR_SYND     0x0000ff00
-#define ECC_FSR_DWORD    0x000000f0
-#define ECC_FSR_UNC      0x00000008
-#define ECC_FSR_TIMEO    0x00000004
-#define ECC_FSR_BADSLOT  0x00000002
-#define ECC_FSR_C        0x00000001
-
-#endif /* !(_SPARC_ECC_H) */
diff --git a/include/asm-sparc/eeprom.h b/include/asm-sparc/eeprom.h
deleted file mode 100644
index e17beeceb405..000000000000
--- a/include/asm-sparc/eeprom.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * eeprom.h:  Definitions for the Sun eeprom.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* The EEPROM and the Mostek Mk48t02 use the same IO address space
- * for their registers/data areas.  The IDPROM lives here too.
- */
diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h
deleted file mode 100644
index d043f80bc2fd..000000000000
--- a/include/asm-sparc/elf.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef __ASMSPARC_ELF_H
-#define __ASMSPARC_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-
-/*
- * Sparc section types
- */
-#define STT_REGISTER		13
-
-/*
- * Sparc ELF relocation types
- */
-#define	R_SPARC_NONE		0
-#define	R_SPARC_8		1
-#define	R_SPARC_16		2
-#define	R_SPARC_32		3
-#define	R_SPARC_DISP8		4
-#define	R_SPARC_DISP16		5
-#define	R_SPARC_DISP32		6
-#define	R_SPARC_WDISP30		7
-#define	R_SPARC_WDISP22		8
-#define	R_SPARC_HI22		9
-#define	R_SPARC_22		10
-#define	R_SPARC_13		11
-#define	R_SPARC_LO10		12
-#define	R_SPARC_GOT10		13
-#define	R_SPARC_GOT13		14
-#define	R_SPARC_GOT22		15
-#define	R_SPARC_PC10		16
-#define	R_SPARC_PC22		17
-#define	R_SPARC_WPLT30		18
-#define	R_SPARC_COPY		19
-#define	R_SPARC_GLOB_DAT	20
-#define	R_SPARC_JMP_SLOT	21
-#define	R_SPARC_RELATIVE	22
-#define	R_SPARC_UA32		23
-#define R_SPARC_PLT32		24
-#define R_SPARC_HIPLT22		25
-#define R_SPARC_LOPLT10		26
-#define R_SPARC_PCPLT32		27
-#define R_SPARC_PCPLT22		28
-#define R_SPARC_PCPLT10		29
-#define R_SPARC_10		30
-#define R_SPARC_11		31
-#define R_SPARC_64		32
-#define R_SPARC_OLO10		33
-#define R_SPARC_WDISP16		40
-#define R_SPARC_WDISP19		41
-#define R_SPARC_7		43
-#define R_SPARC_5		44
-#define R_SPARC_6		45
-
-/* Bits present in AT_HWCAP, primarily for Sparc32.  */
-
-#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
-#define HWCAP_SPARC_STBAR       2
-#define HWCAP_SPARC_SWAP        4
-#define HWCAP_SPARC_MULDIV      8
-#define HWCAP_SPARC_V9		16
-#define HWCAP_SPARC_ULTRA3	32
-
-#define CORE_DUMP_USE_REGSET
-
-/* Format is:
- * 	G0 --> G7
- *	O0 --> O7
- *	L0 --> L7
- *	I0 --> I7
- *	PSR, PC, nPC, Y, WIM, TBR
- */
-typedef unsigned long elf_greg_t;
-#define ELF_NGREG 38
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct {
-	union {
-		unsigned long	pr_regs[32];
-		double		pr_dregs[16];
-	} pr_fr;
-	unsigned long __unused;
-	unsigned long	pr_fsr;
-	unsigned char	pr_qcnt;
-	unsigned char	pr_q_entrysize;
-	unsigned char	pr_en;
-	unsigned int	pr_q[64];
-} elf_fpregset_t;
-
-#include <asm/mbus.h>
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_SPARC)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_ARCH	EM_SPARC
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-
-#define USE_ELF_CORE_DUMP
-#ifndef CONFIG_SUN4
-#define ELF_EXEC_PAGESIZE	4096
-#else
-#define ELF_EXEC_PAGESIZE	8192
-#endif
-
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE)
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  This can NOT be done in userspace
-   on Sparc.  */
-
-/* Sun4c has none of the capabilities, most sun4m's have them all.
- * XXX This is gross, set some global variable at boot time. -DaveM
- */
-#define ELF_HWCAP	((ARCH_SUN4C_SUN4) ? 0 : \
-			 (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
-			  HWCAP_SPARC_SWAP | \
-			  ((srmmu_modtype != Cypress && \
-			    srmmu_modtype != Cypress_vE && \
-			    srmmu_modtype != Cypress_vD) ? \
-			   HWCAP_SPARC_MULDIV : 0)))
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM	(NULL)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
-
-#endif /* !(__ASMSPARC_ELF_H) */
diff --git a/include/asm-sparc/emergency-restart.h b/include/asm-sparc/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-sparc/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-sparc/errno.h b/include/asm-sparc/errno.h
deleted file mode 100644
index a9ef172977de..000000000000
--- a/include/asm-sparc/errno.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef _SPARC_ERRNO_H
-#define _SPARC_ERRNO_H
-
-/* These match the SunOS error numbering scheme. */
-
-#include <asm-generic/errno-base.h>
-
-#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
-#define	EINPROGRESS	36	/* Operation now in progress */
-#define	EALREADY	37	/* Operation already in progress */
-#define	ENOTSOCK	38	/* Socket operation on non-socket */
-#define	EDESTADDRREQ	39	/* Destination address required */
-#define	EMSGSIZE	40	/* Message too long */
-#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
-#define	ENOPROTOOPT	42	/* Protocol not available */
-#define	EPROTONOSUPPORT	43	/* Protocol not supported */
-#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
-#define	EOPNOTSUPP	45	/* Op not supported on transport endpoint */
-#define	EPFNOSUPPORT	46	/* Protocol family not supported */
-#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
-#define	EADDRINUSE	48	/* Address already in use */
-#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
-#define	ENETDOWN	50	/* Network is down */
-#define	ENETUNREACH	51	/* Network is unreachable */
-#define	ENETRESET	52	/* Net dropped connection because of reset */
-#define	ECONNABORTED	53	/* Software caused connection abort */
-#define	ECONNRESET	54	/* Connection reset by peer */
-#define	ENOBUFS		55	/* No buffer space available */
-#define	EISCONN		56	/* Transport endpoint is already connected */
-#define	ENOTCONN	57	/* Transport endpoint is not connected */
-#define	ESHUTDOWN	58	/* No send after transport endpoint shutdown */
-#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
-#define	ETIMEDOUT	60	/* Connection timed out */
-#define	ECONNREFUSED	61	/* Connection refused */
-#define	ELOOP		62	/* Too many symbolic links encountered */
-#define	ENAMETOOLONG	63	/* File name too long */
-#define	EHOSTDOWN	64	/* Host is down */
-#define	EHOSTUNREACH	65	/* No route to host */
-#define	ENOTEMPTY	66	/* Directory not empty */
-#define EPROCLIM        67      /* SUNOS: Too many processes */
-#define	EUSERS		68	/* Too many users */
-#define	EDQUOT		69	/* Quota exceeded */
-#define	ESTALE		70	/* Stale NFS file handle */
-#define	EREMOTE		71	/* Object is remote */
-#define	ENOSTR		72	/* Device not a stream */
-#define	ETIME		73	/* Timer expired */
-#define	ENOSR		74	/* Out of streams resources */
-#define	ENOMSG		75	/* No message of desired type */
-#define	EBADMSG		76	/* Not a data message */
-#define	EIDRM		77	/* Identifier removed */
-#define	EDEADLK		78	/* Resource deadlock would occur */
-#define	ENOLCK		79	/* No record locks available */
-#define	ENONET		80	/* Machine is not on the network */
-#define ERREMOTE        81      /* SunOS: Too many lvls of remote in path */
-#define	ENOLINK		82	/* Link has been severed */
-#define	EADV		83	/* Advertise error */
-#define	ESRMNT		84	/* Srmount error */
-#define	ECOMM		85      /* Communication error on send */
-#define	EPROTO		86	/* Protocol error */
-#define	EMULTIHOP	87	/* Multihop attempted */
-#define	EDOTDOT		88	/* RFS specific error */
-#define	EREMCHG		89	/* Remote address changed */
-#define	ENOSYS		90	/* Function not implemented */
-
-/* The rest have no SunOS equivalent. */
-#define	ESTRPIPE	91	/* Streams pipe error */
-#define	EOVERFLOW	92	/* Value too large for defined data type */
-#define	EBADFD		93	/* File descriptor in bad state */
-#define	ECHRNG		94	/* Channel number out of range */
-#define	EL2NSYNC	95	/* Level 2 not synchronized */
-#define	EL3HLT		96	/* Level 3 halted */
-#define	EL3RST		97	/* Level 3 reset */
-#define	ELNRNG		98	/* Link number out of range */
-#define	EUNATCH		99	/* Protocol driver not attached */
-#define	ENOCSI		100	/* No CSI structure available */
-#define	EL2HLT		101	/* Level 2 halted */
-#define	EBADE		102	/* Invalid exchange */
-#define	EBADR		103	/* Invalid request descriptor */
-#define	EXFULL		104	/* Exchange full */
-#define	ENOANO		105	/* No anode */
-#define	EBADRQC		106	/* Invalid request code */
-#define	EBADSLT		107	/* Invalid slot */
-#define	EDEADLOCK	108	/* File locking deadlock error */
-#define	EBFONT		109	/* Bad font file format */
-#define	ELIBEXEC	110	/* Cannot exec a shared library directly */
-#define	ENODATA		111	/* No data available */
-#define	ELIBBAD		112	/* Accessing a corrupted shared library */
-#define	ENOPKG		113	/* Package not installed */
-#define	ELIBACC		114	/* Can not access a needed shared library */
-#define	ENOTUNIQ	115	/* Name not unique on network */
-#define	ERESTART	116	/* Interrupted syscall should be restarted */
-#define	EUCLEAN		117	/* Structure needs cleaning */
-#define	ENOTNAM		118	/* Not a XENIX named type file */
-#define	ENAVAIL		119	/* No XENIX semaphores available */
-#define	EISNAM		120	/* Is a named type file */
-#define	EREMOTEIO	121	/* Remote I/O error */
-#define	EILSEQ		122	/* Illegal byte sequence */
-#define	ELIBMAX		123	/* Atmpt to link in too many shared libs */
-#define	ELIBSCN		124	/* .lib section in a.out corrupted */
-
-#define	ENOMEDIUM	125	/* No medium found */
-#define	EMEDIUMTYPE	126	/* Wrong medium type */
-#define	ECANCELED	127	/* Operation Cancelled */
-#define	ENOKEY		128	/* Required key not available */
-#define	EKEYEXPIRED	129	/* Key has expired */
-#define	EKEYREVOKED	130	/* Key has been revoked */
-#define	EKEYREJECTED	131	/* Key was rejected by service */
-
-/* for robust mutexes */
-#define	EOWNERDEAD	132	/* Owner died */
-#define	ENOTRECOVERABLE	133	/* State not recoverable */
-
-#endif
diff --git a/include/asm-sparc/fb.h b/include/asm-sparc/fb.h
deleted file mode 100644
index b83e44729655..000000000000
--- a/include/asm-sparc/fb.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _SPARC_FB_H_
-#define _SPARC_FB_H_
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-#ifdef CONFIG_SPARC64
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-#endif
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	struct device *dev = info->device;
-	struct device_node *node;
-
-	node = dev->archdata.prom_node;
-	if (node &&
-	    node == of_console_device)
-		return 1;
-
-	return 0;
-}
-
-#endif /* _SPARC_FB_H_ */
diff --git a/include/asm-sparc/fbio.h b/include/asm-sparc/fbio.h
deleted file mode 100644
index c2b27e7a7cad..000000000000
--- a/include/asm-sparc/fbio.h
+++ /dev/null
@@ -1,297 +0,0 @@
-#ifndef __LINUX_FBIO_H
-#define __LINUX_FBIO_H
-
-/* Constants used for fbio SunOS compatibility */
-/* (C) 1996 Miguel de Icaza */
-
-/* Frame buffer types */
-#define FBTYPE_NOTYPE           -1
-#define FBTYPE_SUN1BW           0   /* mono */
-#define FBTYPE_SUN1COLOR        1 
-#define FBTYPE_SUN2BW           2 
-#define FBTYPE_SUN2COLOR        3 
-#define FBTYPE_SUN2GP           4 
-#define FBTYPE_SUN5COLOR        5 
-#define FBTYPE_SUN3COLOR        6 
-#define FBTYPE_MEMCOLOR         7 
-#define FBTYPE_SUN4COLOR        8 
- 
-#define FBTYPE_NOTSUN1          9 
-#define FBTYPE_NOTSUN2          10
-#define FBTYPE_NOTSUN3          11
- 
-#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
-#define FBTYPE_SUNROP_COLOR     13
-#define FBTYPE_SUNFB_VIDEO      14
-#define FBTYPE_SUNGIFB          15
-#define FBTYPE_SUNGPLAS         16
-#define FBTYPE_SUNGP3           17
-#define FBTYPE_SUNGT            18
-#define FBTYPE_SUNLEO           19      /* zx Leo card */
-#define FBTYPE_MDICOLOR         20      /* cg14 */
-#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
-
-#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
-
-/* Does not seem to be listed in the Sun file either */
-#define FBTYPE_CREATOR          22
-#define FBTYPE_PCI_IGA1682	23
-#define FBTYPE_P9100COLOR	24
-
-/* fbio ioctls */
-/* Returned by FBIOGTYPE */
-struct  fbtype {
-        int     fb_type;        /* fb type, see above */
-        int     fb_height;      /* pixels */
-        int     fb_width;       /* pixels */
-        int     fb_depth;
-        int     fb_cmsize;      /* color map entries */
-        int     fb_size;        /* fb size in bytes */
-};
-#define FBIOGTYPE _IOR('F', 0, struct fbtype)
-
-struct  fbcmap {
-        int             index;          /* first element (0 origin) */
-        int             count;
-        unsigned char   __user *red;
-        unsigned char   __user *green;
-        unsigned char   __user *blue;
-};
-
-#ifdef __KERNEL__
-#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
-#else
-#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
-#endif
-
-/* # of device specific values */
-#define FB_ATTR_NDEVSPECIFIC    8
-/* # of possible emulations */
-#define FB_ATTR_NEMUTYPES       4
- 
-struct fbsattr {
-        int     flags;
-        int     emu_type;	/* -1 if none */
-        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
-};
- 
-struct fbgattr {
-        int     real_type;	/* real frame buffer type */
-        int     owner;		/* unknown */
-        struct fbtype fbtype;	/* real frame buffer fbtype */
-        struct fbsattr sattr;   
-        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
-};
-#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
-#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
-
-#define FBIOSVIDEO _IOW('F', 7, int)
-#define FBIOGVIDEO _IOR('F', 8, int)
-
-struct fbcursor {
-        short set;              /* what to set, choose from the list above */
-        short enable;           /* cursor on/off */
-        struct fbcurpos pos;    /* cursor position */
-        struct fbcurpos hot;    /* cursor hot spot */
-        struct fbcmap cmap;     /* color map info */
-        struct fbcurpos size;   /* cursor bit map size */
-        char *image;            /* cursor image bits */
-        char *mask;             /* cursor mask bits */
-};
-
-/* set/get cursor attributes/shape */
-#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
-#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
- 
-/* set/get cursor position */
-#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
-#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
- 
-/* get max cursor size */
-#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
-
-/* wid manipulation */
-struct fb_wid_alloc {
-#define FB_WID_SHARED_8		0
-#define FB_WID_SHARED_24	1
-#define FB_WID_DBL_8		2
-#define FB_WID_DBL_24		3
-	__u32	wa_type;
-	__s32	wa_index;	/* Set on return */
-	__u32	wa_count;	
-};
-struct fb_wid_item {
-	__u32	wi_type;
-	__s32	wi_index;
-	__u32	wi_attrs;
-	__u32	wi_values[32];
-};
-struct fb_wid_list {
-	__u32	wl_flags;
-	__u32	wl_count;
-	struct fb_wid_item	*wl_list;
-};
-
-#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
-#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
-#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
-#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
-
-/* Creator ioctls */
-#define FFB_IOCTL	('F'<<8)
-#define FFB_SYS_INFO		(FFB_IOCTL|80)
-#define FFB_CLUTREAD		(FFB_IOCTL|81)
-#define FFB_CLUTPOST		(FFB_IOCTL|82)
-#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
-#define FFB_GETMONITORID	(FFB_IOCTL|84)
-#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
-#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
-#define FFB_SETSERVER		(FFB_IOCTL|87)
-#define FFB_SETOVCTL		(FFB_IOCTL|88)
-#define FFB_GETOVCTL		(FFB_IOCTL|89)
-#define FFB_GETSAXNUM		(FFB_IOCTL|90)
-#define FFB_FBDEBUG		(FFB_IOCTL|91)
-
-/* Cg14 ioctls */
-#define MDI_IOCTL          ('M'<<8)
-#define MDI_RESET          (MDI_IOCTL|1)
-#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
-#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
-#    define MDI_32_PIX     32
-#    define MDI_16_PIX     16
-#    define MDI_8_PIX      8
-
-struct mdi_cfginfo {
-	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
-        int     mdi_type;       /* FBTYPE name */
-        int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
-        int     mdi_size;       /* available ram */
-        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
-        int     mdi_pixfreq;    /* pixel clock (from PROM) */
-};
-
-/* SparcLinux specific ioctl for the MDI, should be replaced for
- * the SET_XLUT/SET_CLUTn ioctls instead
- */
-#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
-
-/* leo & ffb ioctls */
-struct fb_clut_alloc {
-	__u32	clutid;	/* Set on return */
- 	__u32	flag;
- 	__u32	index;
-};
-
-struct fb_clut {
-#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
- 	__u32	flag;
- 	__u32	clutid;
- 	__u32	offset;
- 	__u32	count;
- 	char *	red;
- 	char *	green;
- 	char *	blue;
-};
-
-struct fb_clut32 {
- 	__u32	flag;
- 	__u32	clutid;
- 	__u32	offset;
- 	__u32	count;
- 	__u32	red;
- 	__u32	green;
- 	__u32	blue;
-};
-
-#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
-#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
-#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
-#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
-#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
-#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
-
-#ifdef __KERNEL__
-/* Addresses on the fd of a cgsix that are mappable */
-#define CG6_FBC    0x70000000
-#define CG6_TEC    0x70001000
-#define CG6_BTREGS 0x70002000
-#define CG6_FHC    0x70004000
-#define CG6_THC    0x70005000
-#define CG6_ROM    0x70006000
-#define CG6_RAM    0x70016000
-#define CG6_DHC    0x80000000
-
-#define CG3_MMAP_OFFSET 0x4000000
-
-/* Addresses on the fd of a tcx that are mappable */
-#define TCX_RAM8BIT   		0x00000000
-#define TCX_RAM24BIT   		0x01000000
-#define TCX_UNK3   		0x10000000
-#define TCX_UNK4   		0x20000000
-#define TCX_CONTROLPLANE   	0x28000000
-#define TCX_UNK6   		0x30000000
-#define TCX_UNK7   		0x38000000
-#define TCX_TEC    		0x70000000
-#define TCX_BTREGS 		0x70002000
-#define TCX_THC    		0x70004000
-#define TCX_DHC    		0x70008000
-#define TCX_ALT	   		0x7000a000
-#define TCX_SYNC   		0x7000e000
-#define TCX_UNK2    		0x70010000
-
-/* CG14 definitions */
-
-/* Offsets into the OBIO space: */
-#define CG14_REGS        0       /* registers */
-#define CG14_CURSORREGS  0x1000  /* cursor registers */
-#define CG14_DACREGS     0x2000  /* DAC registers */
-#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
-#define CG14_CLUT1       0x4000  /* Color Look Up Table */
-#define CG14_CLUT2       0x5000  /* Color Look Up Table */
-#define CG14_CLUT3       0x6000  /* Color Look Up Table */
-#define CG14_AUTO	 0xf000
-
-#endif /* KERNEL */
-
-/* These are exported to userland for applications to use */
-/* Mappable offsets for the cg14: control registers */
-#define MDI_DIRECT_MAP 0x10000000
-#define MDI_CTLREG_MAP 0x20000000
-#define MDI_CURSOR_MAP 0x30000000
-#define MDI_SHDW_VRT_MAP 0x40000000
-
-/* Mappable offsets for the cg14: frame buffer resolutions */
-/* 32 bits */
-#define MDI_CHUNKY_XBGR_MAP 0x50000000
-#define MDI_CHUNKY_BGR_MAP 0x60000000
-
-/* 16 bits */
-#define MDI_PLANAR_X16_MAP 0x70000000
-#define MDI_PLANAR_C16_MAP 0x80000000
-
-/* 8 bit is done as CG3 MMAP offset */
-/* 32 bits, planar */
-#define MDI_PLANAR_X32_MAP 0x90000000
-#define MDI_PLANAR_B32_MAP 0xa0000000
-#define MDI_PLANAR_G32_MAP 0xb0000000
-#define MDI_PLANAR_R32_MAP 0xc0000000
-
-/* Mappable offsets on leo */
-#define LEO_SS0_MAP            0x00000000
-#define LEO_LC_SS0_USR_MAP     0x00800000
-#define LEO_LD_SS0_MAP         0x00801000
-#define LEO_LX_CURSOR_MAP      0x00802000
-#define LEO_SS1_MAP            0x00803000
-#define LEO_LC_SS1_USR_MAP     0x01003000
-#define LEO_LD_SS1_MAP         0x01004000
-#define LEO_UNK_MAP            0x01005000
-#define LEO_LX_KRN_MAP         0x01006000
-#define LEO_LC_SS0_KRN_MAP     0x01007000
-#define LEO_LC_SS1_KRN_MAP     0x01008000
-#define LEO_LD_GBL_MAP         0x01009000
-#define LEO_UNK2_MAP           0x0100a000
-
-#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-sparc/fcntl.h b/include/asm-sparc/fcntl.h
deleted file mode 100644
index 07bd2d80257f..000000000000
--- a/include/asm-sparc/fcntl.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _SPARC_FCNTL_H
-#define _SPARC_FCNTL_H
-
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
-   located on an ext2 file system */
-#define O_APPEND	0x0008
-#define FASYNC		0x0040	/* fcntl, for BSD compatibility */
-#define O_CREAT		0x0200	/* not fcntl */
-#define O_TRUNC		0x0400	/* not fcntl */
-#define O_EXCL		0x0800	/* not fcntl */
-#define O_SYNC		0x2000
-#define O_NONBLOCK	0x4000
-#define O_NDELAY	(0x0004 | O_NONBLOCK)
-#define O_NOCTTY	0x8000	/* not fcntl */
-#define O_LARGEFILE	0x40000
-#define O_DIRECT        0x100000 /* direct disk access hint */
-#define O_NOATIME	0x200000
-#define O_CLOEXEC	0x400000
-
-#define F_GETOWN	5	/*  for sockets. */
-#define F_SETOWN	6	/*  for sockets. */
-#define F_GETLK		7
-#define F_SETLK		8
-#define F_SETLKW	9
-
-/* for posix fcntl() and lockf() */
-#define F_RDLCK		1
-#define F_WRLCK		2
-#define F_UNLCK		3
-
-#define __ARCH_FLOCK_PAD	short __unused;
-#define __ARCH_FLOCK64_PAD	short __unused;
-
-#include <asm-generic/fcntl.h>
-
-#endif
diff --git a/include/asm-sparc/fixmap.h b/include/asm-sparc/fixmap.h
deleted file mode 100644
index f18fc0755adf..000000000000
--- a/include/asm-sparc/fixmap.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * fixmap.h: compile-time virtual memory allocation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998 Ingo Molnar
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- */
-
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-#include <linux/kernel.h>
-#include <asm/page.h>
-#ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
-#include <asm/kmap_types.h>
-#endif
-
-/*
- * Here we define all the compile-time 'special' virtual
- * addresses. The point is to have a constant address at
- * compile time, but to set the physical address only
- * in the boot process. We allocate these special  addresses
- * from the top of unused virtual memory (0xfd000000 - 1 page) backwards.
- * Also this lets us do fail-safe vmalloc(), we
- * can guarantee that these special addresses and
- * vmalloc()-ed addresses never overlap.
- *
- * these 'compile-time allocated' memory buffers are
- * fixed-size 4k pages. (or larger if used with an increment
- * highger than 1) use fixmap_set(idx,phys) to associate
- * physical memory with fixmap indices.
- *
- * TLB entries of such buffers will not be flushed across
- * task switches.
- */
-
-/*
- * on UP currently we will have no trace of the fixmap mechanism,
- * no page table allocations, etc. This might change in the
- * future, say framebuffers for the console driver(s) could be
- * fix-mapped?
- */
-enum fixed_addresses {
-	FIX_HOLE,
-#ifdef CONFIG_HIGHMEM
-	FIX_KMAP_BEGIN,
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
-#endif
-	__end_of_fixed_addresses
-};
-
-extern void __set_fixmap (enum fixed_addresses idx,
-					unsigned long phys, pgprot_t flags);
-
-#define set_fixmap(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL)
-/*
- * Some hardware wants to get fixmapped without caching.
- */
-#define set_fixmap_nocache(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-/*
- * used by vmalloc.c.
- *
- * Leave one empty page between IO pages at 0xfd000000 and
- * the start of the fixmap.
- */
-#define FIXADDR_TOP	(0xfcfff000UL)
-#define FIXADDR_SIZE	((__end_of_fixed_addresses) << PAGE_SHIFT)
-#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
-
-#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-/*
- * 'index to address' translation. If anyone tries to use the idx
- * directly without tranlation, we catch the bug with a NULL-deference
- * kernel oops. Illegal ranges of incoming indices are caught too.
- */
-static inline unsigned long fix_to_virt(const unsigned int idx)
-{
-	/*
-	 * this branch gets completely eliminated after inlining,
-	 * except when someone tries to use fixaddr indices in an
-	 * illegal way. (such as mixing up address types or using
-	 * out-of-range indices).
-	 *
-	 * If it doesn't get removed, the linker will complain
-	 * loudly with a reasonably clear error message..
-	 */
-	if (idx >= __end_of_fixed_addresses)
-		__this_fixmap_does_not_exist();
-
-        return __fix_to_virt(idx);
-}
-
-static inline unsigned long virt_to_fix(const unsigned long vaddr)
-{
-	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
-	return __virt_to_fix(vaddr);
-}
-
-#endif
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
deleted file mode 100644
index d3978e068e2b..000000000000
--- a/include/asm-sparc/floppy.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
- *
- * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef __ASM_SPARC_FLOPPY_H
-#define __ASM_SPARC_FLOPPY_H
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/idprom.h>
-#include <asm/machines.h>
-#include <asm/oplib.h>
-#include <asm/auxio.h>
-#include <asm/irq.h>
-
-/* We don't need no stinkin' I/O port allocation crap. */
-#undef release_region
-#undef request_region
-#define release_region(X, Y)	do { } while(0)
-#define request_region(X, Y, Z)	(1)
-
-/* References:
- * 1) Netbsd Sun floppy driver.
- * 2) NCR 82077 controller manual
- * 3) Intel 82077 controller manual
- */
-struct sun_flpy_controller {
-	volatile unsigned char status_82072;  /* Main Status reg. */
-#define dcr_82072              status_82072   /* Digital Control reg. */
-#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
-
-	volatile unsigned char data_82072;    /* Data fifo. */
-#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
-
-	volatile unsigned char dor_82077;     /* Digital Output reg. */
-	volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
-
-	volatile unsigned char status_82077;  /* Main Status Register. */
-#define drs_82077              status_82077   /* Digital Rate Select reg. */
-
-	volatile unsigned char data_82077;    /* Data fifo. */
-	volatile unsigned char ___unused;
-	volatile unsigned char dir_82077;     /* Digital Input reg. */
-#define dcr_82077              dir_82077      /* Config Control reg. */
-};
-
-/* You'll only ever find one controller on a SparcStation anyways. */
-static struct sun_flpy_controller *sun_fdc = NULL;
-extern volatile unsigned char *fdc_status;
-
-struct sun_floppy_ops {
-	unsigned char (*fd_inb)(int port);
-	void (*fd_outb)(unsigned char value, int port);
-};
-
-static struct sun_floppy_ops sun_fdops;
-
-#define fd_inb(port)              sun_fdops.fd_inb(port)
-#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
-#define fd_enable_dma()           sun_fd_enable_dma()
-#define fd_disable_dma()          sun_fd_disable_dma()
-#define fd_request_dma()          (0) /* nothing... */
-#define fd_free_dma()             /* nothing... */
-#define fd_clear_dma_ff()         /* nothing... */
-#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
-#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
-#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
-#define fd_enable_irq()           /* nothing... */
-#define fd_disable_irq()          /* nothing... */
-#define fd_cacheflush(addr, size) /* nothing... */
-#define fd_request_irq()          sun_fd_request_irq()
-#define fd_free_irq()             /* nothing... */
-#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
-#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
-#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
-#endif
-
-/* XXX This isn't really correct. XXX */
-#define get_dma_residue(x)        (0)
-
-#define FLOPPY0_TYPE  4
-#define FLOPPY1_TYPE  0
-
-/* Super paranoid... */
-#undef HAVE_DISABLE_HLT
-
-/* Here is where we catch the floppy driver trying to initialize,
- * therefore this is where we call the PROM device tree probing
- * routine etc. on the Sparc.
- */
-#define FDC1                      sun_floppy_init()
-
-#define N_FDC    1
-#define N_DRIVE  8
-
-/* No 64k boundary crossing problems on the Sparc. */
-#define CROSS_64KB(a,s) (0)
-
-/* Routines unique to each controller type on a Sun. */
-static void sun_set_dor(unsigned char value, int fdc_82077)
-{
-	if (sparc_cpu_model == sun4c) {
-		unsigned int bits = 0;
-		if (value & 0x10)
-			bits |= AUXIO_FLPY_DSEL;
-		if ((value & 0x80) == 0)
-			bits |= AUXIO_FLPY_EJCT;
-		set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
-	}
-	if (fdc_82077) {
-		sun_fdc->dor_82077 = value;
-	}
-}
-
-static unsigned char sun_read_dir(void)
-{
-	if (sparc_cpu_model == sun4c)
-		return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
-	else
-		return sun_fdc->dir_82077;
-}
-
-static unsigned char sun_82072_fd_inb(int port)
-{
-	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to read unknown port %d\n", port);
-		panic("floppy: Port bolixed.");
-	case 4: /* FD_STATUS */
-		return sun_fdc->status_82072 & ~STATUS_DMA;
-	case 5: /* FD_DATA */
-		return sun_fdc->data_82072;
-	case 7: /* FD_DIR */
-		return sun_read_dir();
-	};
-	panic("sun_82072_fd_inb: How did I get here?");
-}
-
-static void sun_82072_fd_outb(unsigned char value, int port)
-{
-	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to write to unknown port %d\n", port);
-		panic("floppy: Port bolixed.");
-	case 2: /* FD_DOR */
-		sun_set_dor(value, 0);
-		break;
-	case 5: /* FD_DATA */
-		sun_fdc->data_82072 = value;
-		break;
-	case 7: /* FD_DCR */
-		sun_fdc->dcr_82072 = value;
-		break;
-	case 4: /* FD_STATUS */
-		sun_fdc->status_82072 = value;
-		break;
-	};
-	return;
-}
-
-static unsigned char sun_82077_fd_inb(int port)
-{
-	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to read unknown port %d\n", port);
-		panic("floppy: Port bolixed.");
-	case 0: /* FD_STATUS_0 */
-		return sun_fdc->status1_82077;
-	case 1: /* FD_STATUS_1 */
-		return sun_fdc->status2_82077;
-	case 2: /* FD_DOR */
-		return sun_fdc->dor_82077;
-	case 3: /* FD_TDR */
-		return sun_fdc->tapectl_82077;
-	case 4: /* FD_STATUS */
-		return sun_fdc->status_82077 & ~STATUS_DMA;
-	case 5: /* FD_DATA */
-		return sun_fdc->data_82077;
-	case 7: /* FD_DIR */
-		return sun_read_dir();
-	};
-	panic("sun_82077_fd_inb: How did I get here?");
-}
-
-static void sun_82077_fd_outb(unsigned char value, int port)
-{
-	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to write to unknown port %d\n", port);
-		panic("floppy: Port bolixed.");
-	case 2: /* FD_DOR */
-		sun_set_dor(value, 1);
-		break;
-	case 5: /* FD_DATA */
-		sun_fdc->data_82077 = value;
-		break;
-	case 7: /* FD_DCR */
-		sun_fdc->dcr_82077 = value;
-		break;
-	case 4: /* FD_STATUS */
-		sun_fdc->status_82077 = value;
-		break;
-	case 3: /* FD_TDR */
-		sun_fdc->tapectl_82077 = value;
-		break;
-	};
-	return;
-}
-
-/* For pseudo-dma (Sun floppy drives have no real DMA available to
- * them so we must eat the data fifo bytes directly ourselves) we have
- * three state variables.  doing_pdma tells our inline low-level
- * assembly floppy interrupt entry point whether it should sit and eat
- * bytes from the fifo or just transfer control up to the higher level
- * floppy interrupt c-code.  I tried very hard but I could not get the
- * pseudo-dma to work in c-code without getting many overruns and
- * underruns.  If non-zero, doing_pdma encodes the direction of
- * the transfer for debugging.  1=read 2=write
- */
-extern char *pdma_vaddr;
-extern unsigned long pdma_size;
-extern volatile int doing_pdma;
-
-/* This is software state */
-extern char *pdma_base;
-extern unsigned long pdma_areasize;
-
-/* Common routines to all controller types on the Sparc. */
-static inline void virtual_dma_init(void)
-{
-	/* nothing... */
-}
-
-static inline void sun_fd_disable_dma(void)
-{
-	doing_pdma = 0;
-	if (pdma_base) {
-		mmu_unlockarea(pdma_base, pdma_areasize);
-		pdma_base = NULL;
-	}
-}
-
-static inline void sun_fd_set_dma_mode(int mode)
-{
-	switch(mode) {
-	case DMA_MODE_READ:
-		doing_pdma = 1;
-		break;
-	case DMA_MODE_WRITE:
-		doing_pdma = 2;
-		break;
-	default:
-		printk("Unknown dma mode %d\n", mode);
-		panic("floppy: Giving up...");
-	}
-}
-
-static inline void sun_fd_set_dma_addr(char *buffer)
-{
-	pdma_vaddr = buffer;
-}
-
-static inline void sun_fd_set_dma_count(int length)
-{
-	pdma_size = length;
-}
-
-static inline void sun_fd_enable_dma(void)
-{
-	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
-	pdma_base = pdma_vaddr;
-	pdma_areasize = pdma_size;
-}
-
-/* Our low-level entry point in arch/sparc/kernel/entry.S */
-extern int sparc_floppy_request_irq(int irq, unsigned long flags,
-				    irq_handler_t irq_handler);
-
-static int sun_fd_request_irq(void)
-{
-	static int once = 0;
-	int error;
-
-	if(!once) {
-		once = 1;
-		error = sparc_floppy_request_irq(FLOPPY_IRQ,
-						 IRQF_DISABLED,
-						 floppy_interrupt);
-		return ((error == 0) ? 0 : -1);
-	} else return 0;
-}
-
-static struct linux_prom_registers fd_regs[2];
-
-static int sun_floppy_init(void)
-{
-	char state[128];
-	int tnode, fd_node, num_regs;
-	struct resource r;
-
-	use_virtual_dma = 1;
-	
-	FLOPPY_IRQ = 11;
-	/* Forget it if we aren't on a machine that could possibly
-	 * ever have a floppy drive.
-	 */
-	if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
-	   ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
-	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
-		/* We certainly don't have a floppy controller. */
-		goto no_sun_fdc;
-	}
-	/* Well, try to find one. */
-	tnode = prom_getchild(prom_root_node);
-	fd_node = prom_searchsiblings(tnode, "obio");
-	if(fd_node != 0) {
-		tnode = prom_getchild(fd_node);
-		fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
-	} else {
-		fd_node = prom_searchsiblings(tnode, "fd");
-	}
-	if(fd_node == 0) {
-		goto no_sun_fdc;
-	}
-
-	/* The sun4m lets us know if the controller is actually usable. */
-	if(sparc_cpu_model == sun4m &&
-	   prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
-		if(!strcmp(state, "disabled")) {
-			goto no_sun_fdc;
-		}
-	}
-	num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
-	num_regs = (num_regs / sizeof(fd_regs[0]));
-	prom_apply_obio_ranges(fd_regs, num_regs);
-	memset(&r, 0, sizeof(r));
-	r.flags = fd_regs[0].which_io;
-	r.start = fd_regs[0].phys_addr;
-	sun_fdc = (struct sun_flpy_controller *)
-	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
-
-	/* Last minute sanity check... */
-	if(sun_fdc->status_82072 == 0xff) {
-		sun_fdc = NULL;
-		goto no_sun_fdc;
-	}
-
-	sun_fdops.fd_inb = sun_82077_fd_inb;
-	sun_fdops.fd_outb = sun_82077_fd_outb;
-	fdc_status = &sun_fdc->status_82077;
-
-	if (sun_fdc->dor_82077 == 0x80) {
-		sun_fdc->dor_82077 = 0x02;
-		if (sun_fdc->dor_82077 == 0x80) {
-			sun_fdops.fd_inb = sun_82072_fd_inb;
-			sun_fdops.fd_outb = sun_82072_fd_outb;
-			fdc_status = &sun_fdc->status_82072;
-		}
-	}
-
-	/* Success... */
-	allowed_drive_mask = 0x01;
-	return (int) sun_fdc;
-
-no_sun_fdc:
-	return -1;
-}
-
-static int sparc_eject(void)
-{
-	set_dor(0x00, 0xff, 0x90);
-	udelay(500);
-	set_dor(0x00, 0x6f, 0x00);
-	udelay(500);
-	return 0;
-}
-
-#define fd_eject(drive) sparc_eject()
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/include/asm-sparc/futex.h b/include/asm-sparc/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/include/asm-sparc/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-sparc/hardirq.h b/include/asm-sparc/hardirq.h
deleted file mode 100644
index 4f63ed8df551..000000000000
--- a/include/asm-sparc/hardirq.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* hardirq.h: 32-bit Sparc hard IRQ support.
- *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
- */
-
-#ifndef __SPARC_HARDIRQ_H
-#define __SPARC_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS    8
-
-#endif /* __SPARC_HARDIRQ_H */
diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h
deleted file mode 100644
index 7c35491a8b53..000000000000
--- a/include/asm-sparc/head.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef __SPARC_HEAD_H
-#define __SPARC_HEAD_H
-
-#define KERNBASE        0xf0000000  /* First address the kernel will eventually be */
-#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
-#define SUN4C_SEGSZ     (1 << 18)
-#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2)  /* Used in boot remapping. */
-#define INTS_ENAB        0x01           /* entry.S uses this. */
-
-#define SUN4_PROM_VECTOR 0xFFE81000     /* SUN4 PROM needs to be hardwired */
-
-#define WRITE_PAUSE      nop; nop; nop; /* Have to do this after %wim/%psr chg */
-#define NOP_INSN         0x01000000     /* Used to patch sparc_save_state */
-
-/* Here are some trap goodies */
-
-/* Generic trap entry. */
-#define TRAP_ENTRY(type, label) \
-	rd %psr, %l0; b label; rd %wim, %l3; nop;
-
-/* Data/text faults. Defaults to sun4c version at boot time. */
-#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
-#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
-#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
-#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
-
-/* This is for traps we should NEVER get. */
-#define BAD_TRAP(num) \
-        rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
-
-/* This is for traps when we want just skip the instruction which caused it */
-#define SKIP_TRAP(type, name) \
-	jmpl %l2, %g0; rett %l2 + 4; nop; nop;
-
-/* Notice that for the system calls we pull a trick.  We load up a
- * different pointer to the system call vector table in %l7, but call
- * the same generic system call low-level entry point.  The trap table
- * entry sequences are also HyperSparc pipeline friendly ;-)
- */
-
-/* Software trap for Linux system calls. */
-#define LINUX_SYSCALL_TRAP \
-        sethi %hi(sys_call_table), %l7; \
-        or %l7, %lo(sys_call_table), %l7; \
-        b linux_sparc_syscall; \
-        rd %psr, %l0;
-
-#define BREAKPOINT_TRAP \
-	b breakpoint_trap; \
-	rd %psr,%l0; \
-	nop; \
-	nop;
-
-#ifdef CONFIG_KGDB
-#define KGDB_TRAP(num) \
-	b kgdb_trap_low; \
-	rd %psr,%l0; \
-	nop; \
-	nop;
-#else
-#define KGDB_TRAP(num) \
-	BAD_TRAP(num)
-#endif
-
-/* The Get Condition Codes software trap for userland. */
-#define GETCC_TRAP \
-        b getcc_trap_handler; mov %psr, %l0; nop; nop;
-
-/* The Set Condition Codes software trap for userland. */
-#define SETCC_TRAP \
-        b setcc_trap_handler; mov %psr, %l0; nop; nop;
-
-/* The Get PSR software trap for userland. */
-#define GETPSR_TRAP \
-	mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
-
-/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
- * gets handled with another macro.
- */
-#define TRAP_ENTRY_INTERRUPT(int_level) \
-        mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
-
-/* NMI's (Non Maskable Interrupts) are special, you can't keep them
- * from coming in, and basically if you get one, the shows over. ;(
- * On the sun4c they are usually asynchronous memory errors, on the
- * the sun4m they could be either due to mem errors or a software
- * initiated interrupt from the prom/kern on an SMP box saying "I
- * command you to do CPU tricks, read your mailbox for more info."
- */
-#define NMI_TRAP \
-        rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
-
-/* Window overflows/underflows are special and we need to try to be as
- * efficient as possible here....
- */
-#define WINDOW_SPILL \
-        rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
-
-#define WINDOW_FILL \
-        rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
-
-#endif /* __SPARC_HEAD_H */
diff --git a/include/asm-sparc/highmem.h b/include/asm-sparc/highmem.h
deleted file mode 100644
index 3de42e776274..000000000000
--- a/include/asm-sparc/highmem.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * highmem.h: virtual kernel memory mappings for high memory
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- *		      Gerhard.Wichert@pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with 
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/interrupt.h>
-#include <asm/fixmap.h>
-#include <asm/vaddrs.h>
-#include <asm/kmap_types.h>
-#include <asm/pgtable.h>
-
-/* declarations for highmem.c */
-extern unsigned long highstart_pfn, highend_pfn;
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-extern void kmap_init(void) __init;
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.  Currently the simplest way to do this is to align the
- * pkmap region on a pagetable boundary (4MB).
- */
-#define LAST_PKMAP 1024
-#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT)
-#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT))
-
-#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
-#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-static inline void *kmap(struct page *page)
-{
-	BUG_ON(in_interrupt());
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-
-static inline void kunmap(struct page *page)
-{
-	BUG_ON(in_interrupt());
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
-extern void *kmap_atomic(struct page *page, enum km_type type);
-extern void kunmap_atomic(void *kvaddr, enum km_type type);
-extern struct page *kmap_atomic_to_page(void *vaddr);
-
-#define flush_cache_kmaps()	flush_cache_all()
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-sparc/hw_irq.h b/include/asm-sparc/hw_irq.h
deleted file mode 100644
index 8d30a7694be2..000000000000
--- a/include/asm-sparc/hw_irq.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SPARC_HW_IRQ_H
-#define __ASM_SPARC_HW_IRQ_H
-
-/* Dummy include. */
-
-#endif
diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h
deleted file mode 100644
index afd1736ed480..000000000000
--- a/include/asm-sparc/ide.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* ide.h: SPARC PCI specific IDE glue.
- *
- * Copyright (C) 1997  David S. Miller (davem@davemloft.net)
- * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
- * Adaptation from sparc64 version to sparc by Pete Zaitcev.
- */
-
-#ifndef _SPARC_IDE_H
-#define _SPARC_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/psr.h>
-
-#undef  MAX_HWIFS
-#define MAX_HWIFS	2
-
-#define __ide_insl(data_reg, buffer, wcount) \
-	__ide_insw(data_reg, buffer, (wcount)<<1)
-#define __ide_outsl(data_reg, buffer, wcount) \
-	__ide_outsw(data_reg, buffer, (wcount)<<1)
-
-/* On sparc, I/O ports and MMIO registers are accessed identically.  */
-#define __ide_mm_insw	__ide_insw
-#define __ide_mm_insl	__ide_insl
-#define __ide_mm_outsw	__ide_outsw
-#define __ide_mm_outsl	__ide_outsl
-
-static inline void __ide_insw(unsigned long port,
-				  void *dst,
-				  unsigned long count)
-{
-	volatile unsigned short *data_port;
-	/* unsigned long end = (unsigned long)dst + (count << 1); */ /* P3 */
-	u16 *ps = dst;
-	u32 *pi;
-
-	data_port = (volatile unsigned short *)port;
-
-	if(((unsigned long)ps) & 0x2) {
-		*ps++ = *data_port;
-		count--;
-	}
-	pi = (u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w  = (*data_port) << 16;
-		w |= (*data_port);
-		*pi++ = w;
-		count -= 2;
-	}
-	ps = (u16 *)pi;
-	if(count)
-		*ps++ = *data_port;
-
-	/* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */
-}
-
-static inline void __ide_outsw(unsigned long port,
-				   const void *src,
-				   unsigned long count)
-{
-	volatile unsigned short *data_port;
-	/* unsigned long end = (unsigned long)src + (count << 1); */
-	const u16 *ps = src;
-	const u32 *pi;
-
-	data_port = (volatile unsigned short *)port;
-
-	if(((unsigned long)src) & 0x2) {
-		*data_port = *ps++;
-		count--;
-	}
-	pi = (const u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w = *pi++;
-		*data_port = (w >> 16);
-		*data_port = w;
-		count -= 2;
-	}
-	ps = (const u16 *)pi;
-	if(count)
-		*data_port = *ps;
-
-	/* __flush_dcache_range((unsigned long)src, end); */ /* P3 see hme */
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _SPARC_IDE_H */
diff --git a/include/asm-sparc/idprom.h b/include/asm-sparc/idprom.h
deleted file mode 100644
index 41adb417a4e5..000000000000
--- a/include/asm-sparc/idprom.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * idprom.h: Macros and defines for idprom routines
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_IDPROM_H
-#define _SPARC_IDPROM_H
-
-#include <linux/types.h>
-
-struct idprom {
-	u8		id_format;	/* Format identifier (always 0x01) */
-	u8		id_machtype;	/* Machine type */
-	u8		id_ethaddr[6];	/* Hardware ethernet address */
-	s32		id_date;	/* Date of manufacture */
-	u32		id_sernum:24;	/* Unique serial number */
-	u8		id_cksum;	/* Checksum - xor of the data bytes */
-	u8		reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-#endif /* !(_SPARC_IDPROM_H) */
diff --git a/include/asm-sparc/io-unit.h b/include/asm-sparc/io-unit.h
deleted file mode 100644
index 96823b47fd45..000000000000
--- a/include/asm-sparc/io-unit.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* io-unit.h: Definitions for the sun4d IO-UNIT.
- *
- * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#ifndef _SPARC_IO_UNIT_H
-#define _SPARC_IO_UNIT_H
-
-#include <linux/spinlock.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-/* The io-unit handles all virtual to physical address translations
- * that occur between the SBUS and physical memory.  Access by
- * the cpu to IO registers and similar go over the xdbus so are
- * translated by the on chip SRMMU.  The io-unit and the srmmu do
- * not need to have the same translations at all, in fact most
- * of the time the translations they handle are a disjunct set.
- * Basically the io-unit handles all dvma sbus activity.
- */
- 
-/* AIEEE, unlike the nice sun4m, these monsters have 
-   fixed DMA range 64M */
- 
-#define IOUNIT_DMA_BASE	    0xfc000000 /* TOP - 64M */
-#define IOUNIT_DMA_SIZE	    0x04000000 /* 64M */
-/* We use last 1M for sparc_dvma_malloc */
-#define IOUNIT_DVMA_SIZE    0x00100000 /* 1M */
-
-/* The format of an iopte in the external page tables */
-#define IOUPTE_PAGE          0xffffff00 /* Physical page number (PA[35:12])	*/
-#define IOUPTE_CACHE         0x00000080 /* Cached (in Viking/MXCC)		*/
-/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d.
- * XXX Actually, all you should need to do is find out where the registers
- * XXX are and copy over the sparc64 implementation I wrote.  There may be
- * XXX some horrible hwbugs though, so be careful.  -DaveM
- */
-#define IOUPTE_STREAM        0x00000040 /* Translation can use streaming cache	*/
-#define IOUPTE_INTRA	     0x00000008 /* SBUS direct slot->slot transfer	*/
-#define IOUPTE_WRITE         0x00000004 /* Writeable				*/
-#define IOUPTE_VALID         0x00000002 /* IOPTE is valid			*/
-#define IOUPTE_PARITY        0x00000001 /* Parity is checked during DVMA	*/
-
-struct iounit_struct {
-	unsigned long		bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)];
-	spinlock_t		lock;
-	iopte_t			*page_table;
-	unsigned long		rotor[3];
-	unsigned long		limit[4];
-};
-
-#define IOUNIT_BMAP1_START	0x00000000
-#define IOUNIT_BMAP1_END	(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1))
-#define IOUNIT_BMAP2_START	IOUNIT_BMAP1_END
-#define IOUNIT_BMAP2_END	IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2))
-#define IOUNIT_BMAPM_START	IOUNIT_BMAP2_END
-#define IOUNIT_BMAPM_END	((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
-
-extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
-#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
-extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
-
-#endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
deleted file mode 100644
index 3a3e7bdb06b3..000000000000
--- a/include/asm-sparc/io.h
+++ /dev/null
@@ -1,325 +0,0 @@
-#ifndef __SPARC_IO_H
-#define __SPARC_IO_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ioport.h>  /* struct resource */
-
-#include <asm/page.h>      /* IO address mapping routines need this */
-#include <asm/system.h>
-
-#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
-
-static inline u32 flip_dword (u32 l)
-{
-	return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff);
-}
-
-static inline u16 flip_word (u16 w)
-{
-	return ((w&0xff) << 8) | ((w>>8)&0xff);
-}
-
-#define mmiowb()
-
-/*
- * Memory mapped I/O to PCI
- */
-
-static inline u8 __raw_readb(const volatile void __iomem *addr)
-{
-	return *(__force volatile u8 *)addr;
-}
-
-static inline u16 __raw_readw(const volatile void __iomem *addr)
-{
-	return *(__force volatile u16 *)addr;
-}
-
-static inline u32 __raw_readl(const volatile void __iomem *addr)
-{
-	return *(__force volatile u32 *)addr;
-}
-
-static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
-{
-	*(__force volatile u8 *)addr = b;
-}
-
-static inline void __raw_writew(u16 w, volatile void __iomem *addr)
-{
-	*(__force volatile u16 *)addr = w;
-}
-
-static inline void __raw_writel(u32 l, volatile void __iomem *addr)
-{
-	*(__force volatile u32 *)addr = l;
-}
-
-static inline u8 __readb(const volatile void __iomem *addr)
-{
-	return *(__force volatile u8 *)addr;
-}
-
-static inline u16 __readw(const volatile void __iomem *addr)
-{
-	return flip_word(*(__force volatile u16 *)addr);
-}
-
-static inline u32 __readl(const volatile void __iomem *addr)
-{
-	return flip_dword(*(__force volatile u32 *)addr);
-}
-
-static inline void __writeb(u8 b, volatile void __iomem *addr)
-{
-	*(__force volatile u8 *)addr = b;
-}
-
-static inline void __writew(u16 w, volatile void __iomem *addr)
-{
-	*(__force volatile u16 *)addr = flip_word(w);
-}
-
-static inline void __writel(u32 l, volatile void __iomem *addr)
-{
-	*(__force volatile u32 *)addr = flip_dword(l);
-}
-
-#define readb(__addr)		__readb(__addr)
-#define readw(__addr)		__readw(__addr)
-#define readl(__addr)		__readl(__addr)
-#define readb_relaxed(__addr)	readb(__addr)
-#define readw_relaxed(__addr)	readw(__addr)
-#define readl_relaxed(__addr)	readl(__addr)
-
-#define writeb(__b, __addr)	__writeb((__b),(__addr))
-#define writew(__w, __addr)	__writew((__w),(__addr))
-#define writel(__l, __addr)	__writel((__l),(__addr))
-
-/*
- * I/O space operations
- *
- * Arrangement on a Sun is somewhat complicated.
- *
- * First of all, we want to use standard Linux drivers
- * for keyboard, PC serial, etc. These drivers think
- * they access I/O space and use inb/outb.
- * On the other hand, EBus bridge accepts PCI *memory*
- * cycles and converts them into ISA *I/O* cycles.
- * Ergo, we want inb & outb to generate PCI memory cycles.
- *
- * If we want to issue PCI *I/O* cycles, we do this
- * with a low 64K fixed window in PCIC. This window gets
- * mapped somewhere into virtual kernel space and we
- * can use inb/outb again.
- */
-#define inb_local(__addr)	__readb((void __iomem *)(unsigned long)(__addr))
-#define inb(__addr)		__readb((void __iomem *)(unsigned long)(__addr))
-#define inw(__addr)		__readw((void __iomem *)(unsigned long)(__addr))
-#define inl(__addr)		__readl((void __iomem *)(unsigned long)(__addr))
-
-#define outb_local(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
-#define outb(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
-#define outw(__w, __addr)	__writew(__w, (void __iomem *)(unsigned long)(__addr))
-#define outl(__l, __addr)	__writel(__l, (void __iomem *)(unsigned long)(__addr))
-
-#define inb_p(__addr)		inb(__addr)
-#define outb_p(__b, __addr)	outb(__b, __addr)
-#define inw_p(__addr)		inw(__addr)
-#define outw_p(__w, __addr)	outw(__w, __addr)
-#define inl_p(__addr)		inl(__addr)
-#define outl_p(__l, __addr)	outl(__l, __addr)
-
-void outsb(unsigned long addr, const void *src, unsigned long cnt);
-void outsw(unsigned long addr, const void *src, unsigned long cnt);
-void outsl(unsigned long addr, const void *src, unsigned long cnt);
-void insb(unsigned long addr, void *dst, unsigned long count);
-void insw(unsigned long addr, void *dst, unsigned long count);
-void insl(unsigned long addr, void *dst, unsigned long count);
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * SBus accessors.
- *
- * SBus has only one, memory mapped, I/O space.
- * We do not need to flip bytes for SBus of course.
- */
-static inline u8 _sbus_readb(const volatile void __iomem *addr)
-{
-	return *(__force volatile u8 *)addr;
-}
-
-static inline u16 _sbus_readw(const volatile void __iomem *addr)
-{
-	return *(__force volatile u16 *)addr;
-}
-
-static inline u32 _sbus_readl(const volatile void __iomem *addr)
-{
-	return *(__force volatile u32 *)addr;
-}
-
-static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
-{
-	*(__force volatile u8 *)addr = b;
-}
-
-static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
-{
-	*(__force volatile u16 *)addr = w;
-}
-
-static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
-{
-	*(__force volatile u32 *)addr = l;
-}
-
-/*
- * The only reason for #define's is to hide casts to unsigned long.
- */
-#define sbus_readb(__addr)		_sbus_readb(__addr)
-#define sbus_readw(__addr)		_sbus_readw(__addr)
-#define sbus_readl(__addr)		_sbus_readl(__addr)
-#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
-#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
-#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
-
-static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n)
-{
-	while(n--) {
-		sbus_writeb(c, __dst);
-		__dst++;
-	}
-}
-
-static inline void
-_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
-{
-	volatile void __iomem *d = dst;
-
-	while (n--) {
-		writeb(c, d);
-		d++;
-	}
-}
-
-#define memset_io(d,c,sz)	_memset_io(d,c,sz)
-
-static inline void
-_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
-{
-	char *d = dst;
-
-	while (n--) {
-		char tmp = readb(src);
-		*d++ = tmp;
-		src++;
-	}
-}
-
-#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
-
-static inline void 
-_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
-{
-	const char *s = src;
-	volatile void __iomem *d = dst;
-
-	while (n--) {
-		char tmp = *s++;
-		writeb(tmp, d);
-		d++;
-	}
-}
-
-#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
-
-#ifdef __KERNEL__
-
-/*
- * Bus number may be embedded in the higher bits of the physical address.
- * This is why we have no bus number argument to ioremap().
- */
-extern void __iomem *ioremap(unsigned long offset, unsigned long size);
-#define ioremap_nocache(X,Y)	ioremap((X),(Y))
-extern void iounmap(volatile void __iomem *addr);
-
-#define ioread8(X)			readb(X)
-#define ioread16(X)			readw(X)
-#define ioread32(X)			readl(X)
-#define iowrite8(val,X)			writeb(val,X)
-#define iowrite16(val,X)		writew(val,X)
-#define iowrite32(val,X)		writel(val,X)
-
-static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
-{
-	insb((unsigned long __force)port, buf, count);
-}
-static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
-{
-	insw((unsigned long __force)port, buf, count);
-}
-
-static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
-{
-	insl((unsigned long __force)port, buf, count);
-}
-
-static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
-{
-	outsb((unsigned long __force)port, buf, count);
-}
-
-static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
-{
-	outsw((unsigned long __force)port, buf, count);
-}
-
-static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
-{
-	outsl((unsigned long __force)port, buf, count);
-}
-
-/* Create a virtual mapping cookie for an IO port range */
-extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
-extern void ioport_unmap(void __iomem *);
-
-/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-
-/*
- * Bus number may be in res->flags... somewhere.
- */
-extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
-    unsigned long size, char *name);
-extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
-
-
-/*
- * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
- * so rtc_port is static in it. This should not change unless a new
- * hardware pops up.
- */
-#define RTC_PORT(x)   (rtc_port + (x))
-#define RTC_ALWAYS_BCD  0
-
-#endif
-
-#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* !(__SPARC_IO_H) */
diff --git a/include/asm-sparc/ioctl.h b/include/asm-sparc/ioctl.h
deleted file mode 100644
index 7d6bd51321b9..000000000000
--- a/include/asm-sparc/ioctl.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _SPARC_IOCTL_H
-#define _SPARC_IOCTL_H
-
-/*
- * Our DIR and SIZE overlap in order to simulteneously provide
- * a non-zero _IOC_NONE (for binary compatibility) and
- * 14 bits of size as on i386. Here's the layout:
- *
- *   0xE0000000   DIR
- *   0x80000000     DIR = WRITE
- *   0x40000000     DIR = READ
- *   0x20000000     DIR = NONE
- *   0x3FFF0000   SIZE (overlaps NONE bit)
- *   0x0000FF00   TYPE
- *   0x000000FF   NR (CMD)
- */
-
-#define _IOC_NRBITS      8
-#define _IOC_TYPEBITS    8
-#define _IOC_SIZEBITS   13	/* Actually 14, see below. */
-#define _IOC_DIRBITS     3
-
-#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
-#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
-#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
-#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
-#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
-
-#define _IOC_NRSHIFT     0
-#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
-#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
-#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
-
-#define _IOC_NONE        1U
-#define _IOC_READ        2U
-#define _IOC_WRITE       4U
-
-#define _IOC(dir,type,nr,size) \
-        (((dir)  << _IOC_DIRSHIFT) | \
-         ((type) << _IOC_TYPESHIFT) | \
-         ((nr)   << _IOC_NRSHIFT) | \
-         ((size) << _IOC_SIZESHIFT))
-
-#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
-#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
-#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
-#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
-
-/* Used to decode ioctl numbers in drivers despite the leading underscore... */
-#define _IOC_DIR(nr)    \
- ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
-                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
-                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
-#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
-#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
-#define _IOC_SIZE(nr)   \
- ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
-                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
-
-/* ...and for the PCMCIA and sound. */
-#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
-#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
-#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
-#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
-#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
-
-#endif /* !(_SPARC_IOCTL_H) */
diff --git a/include/asm-sparc/ioctls.h b/include/asm-sparc/ioctls.h
deleted file mode 100644
index 3f4d0087b6a3..000000000000
--- a/include/asm-sparc/ioctls.h
+++ /dev/null
@@ -1,136 +0,0 @@
-#ifndef _ASM_SPARC_IOCTLS_H
-#define _ASM_SPARC_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* Big T */
-#define TCGETA		_IOR('T', 1, struct termio)
-#define TCSETA		_IOW('T', 2, struct termio)
-#define TCSETAW		_IOW('T', 3, struct termio)
-#define TCSETAF		_IOW('T', 4, struct termio)
-#define TCSBRK		_IO('T', 5)
-#define TCXONC		_IO('T', 6)
-#define TCFLSH		_IO('T', 7)
-#define TCGETS		_IOR('T', 8, struct termios)
-#define TCSETS		_IOW('T', 9, struct termios)
-#define TCSETSW		_IOW('T', 10, struct termios)
-#define TCSETSF		_IOW('T', 11, struct termios)
-#define TCGETS2		_IOR('T', 12, struct termios2)
-#define TCSETS2		_IOW('T', 13, struct termios2)
-#define TCSETSW2	_IOW('T', 14, struct termios2)
-#define TCSETSF2	_IOW('T', 15, struct termios2)
-
-/* Note that all the ioctls that are not available in Linux have a 
- * double underscore on the front to: a) avoid some programs to
- * thing we support some ioctls under Linux (autoconfiguration stuff)
- */
-/* Little t */
-#define TIOCGETD	_IOR('t', 0, int)
-#define TIOCSETD	_IOW('t', 1, int)
-#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
-#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
-#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
-#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
-#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
-#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
-#define TIOCEXCL	_IO('t', 13)
-#define TIOCNXCL	_IO('t', 14)
-#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
-#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
-#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
-#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
-#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
-#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
-#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
-#define TIOCCONS	_IO('t', 36)
-#define TIOCGSOFTCAR	_IOR('t', 100, int)
-#define TIOCSSOFTCAR	_IOW('t', 101, int)
-#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
-#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
-#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
-#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
-#define TIOCMGET	_IOR('t', 106, int)
-#define TIOCMBIC	_IOW('t', 107, int)
-#define TIOCMBIS	_IOW('t', 108, int)
-#define TIOCMSET	_IOW('t', 109, int)
-#define TIOCSTART       _IO('t', 110)
-#define TIOCSTOP        _IO('t', 111)
-#define TIOCPKT		_IOW('t', 112, int)
-#define TIOCNOTTY	_IO('t', 113)
-#define TIOCSTI		_IOW('t', 114, char)
-#define TIOCOUTQ	_IOR('t', 115, int)
-#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
-#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
-/* 118 is the non-posix setpgrp tty ioctl */
-/* 119 is the non-posix getpgrp tty ioctl */
-#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
-#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
-#define TIOCCBRK        _IO('t', 122)
-#define TIOCSBRK        _IO('t', 123)
-#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
-#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
-#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
-#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
-#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
-#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
-#define TIOCSPGRP	_IOW('t', 130, int)
-#define TIOCGPGRP	_IOR('t', 131, int)
-#define TIOCSCTTY	_IO('t', 132)
-#define TIOCGSID	_IOR('t', 133, int)
-/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
-#define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
-#define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
-
-/* Little f */
-#define FIOCLEX		_IO('f', 1)
-#define FIONCLEX	_IO('f', 2)
-#define FIOASYNC	_IOW('f', 125, int)
-#define FIONBIO		_IOW('f', 126, int)
-#define FIONREAD	_IOR('f', 127, int)
-#define TIOCINQ		FIONREAD
-#define FIOQSIZE	_IOR('f', 128, loff_t)
-
-/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
- * someday.  This is completely bogus, I know...
- */
-#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
-#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
-
-/* Linux specific, no SunOS equivalent. */
-#define TIOCLINUX	0x541C
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TCSBRKP		0x5425
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-#define TIOCMIWAIT	0x545C /* Wait input */
-#define TIOCGICOUNT	0x545D /* Read serial port inline interrupt counts */
-
-/* Kernel definitions */
-#ifdef __KERNEL__
-#define TIOCGETC __TIOCGETC
-#define TIOCGETP __TIOCGETP
-#define TIOCGLTC __TIOCGLTC
-#define TIOCSLTC __TIOCSLTC
-#define TIOCSETP __TIOCSETP
-#define TIOCSETN __TIOCSETN
-#define TIOCSETC __TIOCSETC
-#endif
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h
deleted file mode 100644
index 70c589c05a10..000000000000
--- a/include/asm-sparc/iommu.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/* iommu.h: Definitions for the sun4m IOMMU.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_IOMMU_H
-#define _SPARC_IOMMU_H
-
-#include <asm/page.h>
-#include <asm/bitext.h>
-
-/* The iommu handles all virtual to physical address translations
- * that occur between the SBUS and physical memory.  Access by
- * the cpu to IO registers and similar go over the mbus so are
- * translated by the on chip SRMMU.  The iommu and the srmmu do
- * not need to have the same translations at all, in fact most
- * of the time the translations they handle are a disjunct set.
- * Basically the iommu handles all dvma sbus activity.
- */
-
-/* The IOMMU registers occupy three pages in IO space. */
-struct iommu_regs {
-	/* First page */
-	volatile unsigned long control;    /* IOMMU control */
-	volatile unsigned long base;       /* Physical base of iopte page table */
-	volatile unsigned long _unused1[3];
-	volatile unsigned long tlbflush;   /* write only */
-	volatile unsigned long pageflush;  /* write only */
-	volatile unsigned long _unused2[1017];
-	/* Second page */
-	volatile unsigned long afsr;       /* Async-fault status register */
-	volatile unsigned long afar;       /* Async-fault physical address */
-	volatile unsigned long _unused3[2];
-	volatile unsigned long sbuscfg0;   /* SBUS configuration registers, per-slot */
-	volatile unsigned long sbuscfg1;
-	volatile unsigned long sbuscfg2;
-	volatile unsigned long sbuscfg3;
-	volatile unsigned long mfsr;       /* Memory-fault status register */
-	volatile unsigned long mfar;       /* Memory-fault physical address */
-	volatile unsigned long _unused4[1014];
-	/* Third page */
-	volatile unsigned long mid;        /* IOMMU module-id */
-};
-
-#define IOMMU_CTRL_IMPL     0xf0000000 /* Implementation */
-#define IOMMU_CTRL_VERS     0x0f000000 /* Version */
-#define IOMMU_CTRL_RNGE     0x0000001c /* Mapping RANGE */
-#define IOMMU_RNGE_16MB     0x00000000 /* 0xff000000 -> 0xffffffff */
-#define IOMMU_RNGE_32MB     0x00000004 /* 0xfe000000 -> 0xffffffff */
-#define IOMMU_RNGE_64MB     0x00000008 /* 0xfc000000 -> 0xffffffff */
-#define IOMMU_RNGE_128MB    0x0000000c /* 0xf8000000 -> 0xffffffff */
-#define IOMMU_RNGE_256MB    0x00000010 /* 0xf0000000 -> 0xffffffff */
-#define IOMMU_RNGE_512MB    0x00000014 /* 0xe0000000 -> 0xffffffff */
-#define IOMMU_RNGE_1GB      0x00000018 /* 0xc0000000 -> 0xffffffff */
-#define IOMMU_RNGE_2GB      0x0000001c /* 0x80000000 -> 0xffffffff */
-#define IOMMU_CTRL_ENAB     0x00000001 /* IOMMU Enable */
-
-#define IOMMU_AFSR_ERR      0x80000000 /* LE, TO, or BE asserted */
-#define IOMMU_AFSR_LE       0x40000000 /* SBUS reports error after transaction */
-#define IOMMU_AFSR_TO       0x20000000 /* Write access took more than 12.8 us. */
-#define IOMMU_AFSR_BE       0x10000000 /* Write access received error acknowledge */
-#define IOMMU_AFSR_SIZE     0x0e000000 /* Size of transaction causing error */
-#define IOMMU_AFSR_S        0x01000000 /* Sparc was in supervisor mode */
-#define IOMMU_AFSR_RESV     0x00f00000 /* Reserver, forced to 0x8 by hardware */
-#define IOMMU_AFSR_ME       0x00080000 /* Multiple errors occurred */
-#define IOMMU_AFSR_RD       0x00040000 /* A read operation was in progress */
-#define IOMMU_AFSR_FAV      0x00020000 /* IOMMU afar has valid contents */
-
-#define IOMMU_SBCFG_SAB30   0x00010000 /* Phys-address bit 30 when bypass enabled */
-#define IOMMU_SBCFG_BA16    0x00000004 /* Slave supports 16 byte bursts */
-#define IOMMU_SBCFG_BA8     0x00000002 /* Slave supports 8 byte bursts */
-#define IOMMU_SBCFG_BYPASS  0x00000001 /* Bypass IOMMU, treat all addresses
-					  produced by this device as pure
-					  physical. */
-
-#define IOMMU_MFSR_ERR      0x80000000 /* One or more of PERR1 or PERR0 */
-#define IOMMU_MFSR_S        0x01000000 /* Sparc was in supervisor mode */
-#define IOMMU_MFSR_CPU      0x00800000 /* CPU transaction caused parity error */
-#define IOMMU_MFSR_ME       0x00080000 /* Multiple parity errors occurred */
-#define IOMMU_MFSR_PERR     0x00006000 /* high bit indicates parity error occurred
-					  on the even word of the access, low bit
-					  indicated odd word caused the parity error */
-#define IOMMU_MFSR_BM       0x00001000 /* Error occurred while in boot mode */
-#define IOMMU_MFSR_C        0x00000800 /* Address causing error was marked cacheable */
-#define IOMMU_MFSR_RTYP     0x000000f0 /* Memory request transaction type */
-
-#define IOMMU_MID_SBAE      0x001f0000 /* SBus arbitration enable */
-#define IOMMU_MID_SE        0x00100000 /* Enables SCSI/ETHERNET arbitration */
-#define IOMMU_MID_SB3       0x00080000 /* Enable SBUS device 3 arbitration */
-#define IOMMU_MID_SB2       0x00040000 /* Enable SBUS device 2 arbitration */
-#define IOMMU_MID_SB1       0x00020000 /* Enable SBUS device 1 arbitration */
-#define IOMMU_MID_SB0       0x00010000 /* Enable SBUS device 0 arbitration */
-#define IOMMU_MID_MID       0x0000000f /* Module-id, hardcoded to 0x8 */
-
-/* The format of an iopte in the page tables */
-#define IOPTE_PAGE          0x07ffff00 /* Physical page number (PA[30:12]) */
-#define IOPTE_CACHE         0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
-#define IOPTE_WRITE         0x00000004 /* Writeable */
-#define IOPTE_VALID         0x00000002 /* IOPTE is valid */
-#define IOPTE_WAZ           0x00000001 /* Write as zeros */
-
-struct iommu_struct {
-	struct iommu_regs *regs;
-	iopte_t *page_table;
-	/* For convenience */
-	unsigned long start; /* First managed virtual address */
-	unsigned long end;   /* Last managed virtual address */
-
-	struct bit_map usemap;
-};
-
-static inline void iommu_invalidate(struct iommu_regs *regs)
-{
-	regs->tlbflush = 0;
-}
-
-static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
-{
-	regs->pageflush = (ba & PAGE_MASK);
-}
-
-#endif /* !(_SPARC_IOMMU_H) */
diff --git a/include/asm-sparc/ipcbuf.h b/include/asm-sparc/ipcbuf.h
deleted file mode 100644
index 9bef02d04e4b..000000000000
--- a/include/asm-sparc/ipcbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _SPARC_IPCBUF_H
-#define _SPARC_IPCBUF_H
-
-/* 
- * The ipc64_perm structure for sparc architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values (so that this structure matches
- *				    sparc64 ipc64_perm)
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	unsigned short		__pad1;
-	__kernel_mode_t		mode;
-	unsigned short		__pad2;
-	unsigned short		seq;
-	unsigned long long	__unused1;
-	unsigned long long	__unused2;
-};
-
-#endif /* _SPARC_IPCBUF_H */
diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h
deleted file mode 100644
index fe205cc444b8..000000000000
--- a/include/asm-sparc/irq.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* irq.h: IRQ registers on the Sparc.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC_IRQ_H
-#define _SPARC_IRQ_H
-
-#include <linux/interrupt.h>
-
-#define NR_IRQS    16
-
-#define irq_canonicalize(irq)	(irq)
-
-#endif
diff --git a/include/asm-sparc/irq_regs.h b/include/asm-sparc/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-sparc/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-sparc/irqflags.h b/include/asm-sparc/irqflags.h
deleted file mode 100644
index db398fb32826..000000000000
--- a/include/asm-sparc/irqflags.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-sparc/irqflags.h
- *
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-
-extern void raw_local_irq_restore(unsigned long);
-extern unsigned long __raw_local_irq_save(void);
-extern void raw_local_irq_enable(void);
-
-static inline unsigned long getipl(void)
-{
-        unsigned long retval;
-
-        __asm__ __volatile__("rd        %%psr, %0" : "=r" (retval));
-        return retval;
-}
-
-#define raw_local_save_flags(flags) ((flags) = getipl())
-#define raw_local_irq_save(flags)   ((flags) = __raw_local_irq_save())
-#define raw_local_irq_disable()     ((void) __raw_local_irq_save())
-#define raw_irqs_disabled()         ((getipl() & PSR_PIL) != 0)
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-        return ((flags & PSR_PIL) != 0);
-}
-
-#endif /* (__ASSEMBLY__) */
-
-#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/include/asm-sparc/jsflash.h b/include/asm-sparc/jsflash.h
deleted file mode 100644
index 3457f29bd73b..000000000000
--- a/include/asm-sparc/jsflash.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * jsflash.h: OS Flash SIMM support for JavaStations.
- *
- * Copyright (C) 1999  Pete Zaitcev
- */
-
-#ifndef _SPARC_JSFLASH_H
-#define _SPARC_JSFLASH_H
-
-#ifndef _SPARC_TYPES_H
-#include <asm/types.h>
-#endif
-
-/*
- * Semantics of the offset is a full address.
- * Hardcode it or get it from probe ioctl.
- *
- * We use full bus address, so that we would be
- * automatically compatible with possible future systems.
- */
-
-#define JSFLASH_IDENT   (('F'<<8)|54)
-struct jsflash_ident_arg {
-	__u64 off;                /* 0x20000000 is included */
-	__u32 size;
-	char name[32];		/* With trailing zero */
-};
-
-#define JSFLASH_ERASE   (('F'<<8)|55)
-/* Put 0 as argument, may be flags or sector number... */
-
-#define JSFLASH_PROGRAM (('F'<<8)|56)
-struct jsflash_program_arg {
-	__u64 data;		/* char* for sparc and sparc64 */
-	__u64 off;
-	__u32 size;
-};
-
-#endif /* _SPARC_JSFLASH_H */
diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h
deleted file mode 100644
index f69fe7d84b3c..000000000000
--- a/include/asm-sparc/kdebug.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * kdebug.h:  Defines and definitions for debugging the Linux kernel
- *            under various kernel debuggers.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_KDEBUG_H
-#define _SPARC_KDEBUG_H
-
-#include <asm/openprom.h>
-#include <asm/vaddrs.h>
-
-/* Breakpoints are enter through trap table entry 126.  So in sparc assembly
- * if you want to drop into the debugger you do:
- *
- * t DEBUG_BP_TRAP
- */
-
-#define DEBUG_BP_TRAP     126
-
-#ifndef __ASSEMBLY__
-/* The debug vector is passed in %o1 at boot time.  It is a pointer to
- * a structure in the debuggers address space.  Here is its format.
- */
-
-typedef unsigned int (*debugger_funct)(void);
-
-struct kernel_debug {
-	/* First the entry point into the debugger.  You jump here
-	 * to give control over to the debugger.
-	 */
-	unsigned long kdebug_entry;
-	unsigned long kdebug_trapme;   /* Figure out later... */
-	/* The following is the number of pages that the debugger has
-	 * taken from to total pool.
-	 */
-	unsigned long *kdebug_stolen_pages;
-	/* Ok, after you remap yourself and/or change the trap table
-	 * from what you were left with at boot time you have to call
-	 * this synchronization function so the debugger can check out
-	 * what you have done.
-	 */
-	debugger_funct teach_debugger;
-}; /* I think that is it... */
-
-extern struct kernel_debug *linux_dbvec;
-
-/* Use this macro in C-code to enter the debugger. */
-static inline void sp_enter_debugger(void)
-{
-	__asm__ __volatile__("jmpl %0, %%o7\n\t"
-			     "nop\n\t" : :
-			     "r" (linux_dbvec) : "o7", "memory");
-}
-
-#define SP_ENTER_DEBUGGER do { \
-	     if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
-	       sp_enter_debugger(); \
-		       } while(0)
-
-enum die_val {
-	DIE_UNUSED,
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-/* Some nice offset defines for assembler code. */
-#define KDEBUG_ENTRY_OFF    0x0
-#define KDEBUG_DUNNO_OFF    0x4
-#define KDEBUG_DUNNO2_OFF   0x8
-#define KDEBUG_TEACH_OFF    0xc
-
-#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/include/asm-sparc/kgdb.h b/include/asm-sparc/kgdb.h
deleted file mode 100644
index b6ef301d05bf..000000000000
--- a/include/asm-sparc/kgdb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _SPARC_KGDB_H
-#define _SPARC_KGDB_H
-
-#ifdef CONFIG_SPARC32
-#define BUFMAX			2048
-#else
-#define BUFMAX			4096
-#endif
-
-enum regnames {
-	GDB_G0, GDB_G1, GDB_G2, GDB_G3, GDB_G4, GDB_G5, GDB_G6, GDB_G7,
-	GDB_O0, GDB_O1, GDB_O2, GDB_O3, GDB_O4, GDB_O5, GDB_SP, GDB_O7,
-	GDB_L0, GDB_L1, GDB_L2, GDB_L3, GDB_L4, GDB_L5, GDB_L6, GDB_L7,
-	GDB_I0, GDB_I1, GDB_I2, GDB_I3, GDB_I4, GDB_I5, GDB_FP, GDB_I7,
-	GDB_F0,
-	GDB_F31 = GDB_F0 + 31,
-#ifdef CONFIG_SPARC32
-	GDB_Y, GDB_PSR, GDB_WIM, GDB_TBR, GDB_PC, GDB_NPC,
-	GDB_FSR, GDB_CSR,
-#else
-	GDB_F32 = GDB_F0 + 32,
-	GDB_F62 = GDB_F32 + 15,
-	GDB_PC, GDB_NPC, GDB_STATE, GDB_FSR, GDB_FPRS, GDB_Y,
-#endif
-};
-
-#ifdef CONFIG_SPARC32
-#define NUMREGBYTES		((GDB_CSR + 1) * 4)
-#else
-#define NUMREGBYTES		((GDB_Y + 1) * 8)
-#endif
-
-extern void arch_kgdb_breakpoint(void);
-
-#define BREAK_INSTR_SIZE	4
-#define CACHE_FLUSH_IS_SAFE	1
-
-#endif /* _SPARC_KGDB_H */
diff --git a/include/asm-sparc/kmap_types.h b/include/asm-sparc/kmap_types.h
deleted file mode 100644
index e215f7104974..000000000000
--- a/include/asm-sparc/kmap_types.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
-
-#endif
diff --git a/include/asm-sparc/kvm.h b/include/asm-sparc/kvm.h
deleted file mode 100644
index 2e5478da3819..000000000000
--- a/include/asm-sparc/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_SPARC_H
-#define __LINUX_KVM_SPARC_H
-
-/* sparc does not support KVM */
-
-#endif
diff --git a/include/asm-sparc/linkage.h b/include/asm-sparc/linkage.h
deleted file mode 100644
index 291c2d01c44f..000000000000
--- a/include/asm-sparc/linkage.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-/* Nothing to see here... */
-
-#endif
diff --git a/include/asm-sparc/local.h b/include/asm-sparc/local.h
deleted file mode 100644
index bc80815a435c..000000000000
--- a/include/asm-sparc/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC_LOCAL_H
-#define _SPARC_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif
diff --git a/include/asm-sparc/machines.h b/include/asm-sparc/machines.h
deleted file mode 100644
index d6c6bf836206..000000000000
--- a/include/asm-sparc/machines.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * machines.h:  Defines for taking apart the machine type value in the
- *              idprom and determining the kind of machine we are on.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_MACHINES_H
-#define _SPARC_MACHINES_H
-
-struct Sun_Machine_Models {
-	char *name;
-	unsigned char id_machtype;
-};
-
-/* Current number of machines we know about that has an IDPROM
- * machtype entry including one entry for the 0x80 OBP machines.
- */
-#define NUM_SUN_MACHINES   15
-
-extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
-
-/* The machine type in the idprom area looks like this:
- *
- * ---------------
- * | ARCH | MACH |
- * ---------------
- *  7    4 3    0
- *
- * The ARCH field determines the architecture line (sun4, sun4c, etc).
- * The MACH field determines the machine make within that architecture.
- */
-
-#define SM_ARCH_MASK  0xf0
-#define SM_SUN4       0x20
-#define SM_SUN4C      0x50
-#define SM_SUN4M      0x70
-#define SM_SUN4M_OBP  0x80
-
-#define SM_TYP_MASK   0x0f
-/* Sun4 machines */
-#define SM_4_260      0x01    /* Sun 4/200 series */
-#define SM_4_110      0x02    /* Sun 4/100 series */
-#define SM_4_330      0x03    /* Sun 4/300 series */
-#define SM_4_470      0x04    /* Sun 4/400 series */
-
-/* Sun4c machines                Full Name              - PROM NAME */
-#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
-#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
-#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
-#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
-#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
-#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
-#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
-
-/* Sun4m machines, these predate the OpenBoot.  These values only mean
- * something if the value in the ARCH field is SM_SUN4M, if it is
- * SM_SUN4M_OBP then you have the following situation:
- * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
- * 2) You have to consult OpenBoot to determine which machine this is.
- */
-#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
-#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
-#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
-
-/* Sun4d machines -- N/A */
-/* Sun4e machines -- N/A */
-/* Sun4u machines -- N/A */
-
-#endif /* !(_SPARC_MACHINES_H) */
diff --git a/include/asm-sparc/mbus.h b/include/asm-sparc/mbus.h
deleted file mode 100644
index bb5ae614b166..000000000000
--- a/include/asm-sparc/mbus.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * mbus.h:  Various defines for MBUS modules.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MBUS_H
-#define _SPARC_MBUS_H
-
-#include <asm/ross.h>    /* HyperSparc stuff */
-#include <asm/cypress.h> /* Cypress Chips */
-#include <asm/viking.h>  /* Ugh, bug city... */
-
-enum mbus_module {
-	HyperSparc        = 0,
-	Cypress           = 1,
-	Cypress_vE        = 2,
-	Cypress_vD        = 3,
-	Swift_ok          = 4,
-	Swift_bad_c       = 5,
-	Swift_lots_o_bugs = 6,
-	Tsunami           = 7,
-	Viking_12         = 8,
-	Viking_2x         = 9,
-	Viking_30         = 10,
-	Viking_35         = 11,
-	Viking_new        = 12,
-	TurboSparc	  = 13,
-	SRMMU_INVAL_MOD   = 14,
-};
-
-extern enum mbus_module srmmu_modtype;
-extern unsigned int viking_rev, swift_rev, cypress_rev;
-
-/* HW Mbus module bugs we have to deal with */
-#define HWBUG_COPYBACK_BROKEN        0x00000001
-#define HWBUG_ASIFLUSH_BROKEN        0x00000002
-#define HWBUG_VACFLUSH_BITROT        0x00000004
-#define HWBUG_KERN_ACCBROKEN         0x00000008
-#define HWBUG_KERN_CBITBROKEN        0x00000010
-#define HWBUG_MODIFIED_BITROT        0x00000020
-#define HWBUG_PC_BADFAULT_ADDR       0x00000040
-#define HWBUG_SUPERSCALAR_BAD        0x00000080
-#define HWBUG_PACINIT_BITROT         0x00000100
-
-extern unsigned int hwbug_bitmask;
-
-/* First the module type values. To find out which you have, just load
- * the mmu control register from ASI_M_MMUREG alternate address space and
- * shift the value right 28 bits.
- */
-/* IMPL field means the company which produced the chip. */
-#define MBUS_VIKING        0x4   /* bleech, Texas Instruments Module */
-#define MBUS_LSI           0x3   /* LSI Logics */
-#define MBUS_ROSS          0x1   /* Ross is nice */
-#define MBUS_FMI           0x0   /* Fujitsu Microelectronics/Swift */
-
-/* Ross Module versions */
-#define ROSS_604_REV_CDE        0x0   /* revisions c, d, and e */
-#define ROSS_604_REV_F          0x1   /* revision f */
-#define ROSS_605                0xf   /* revision a, a.1, and a.2 */
-#define ROSS_605_REV_B          0xe   /* revision b */
-
-/* TI Viking Module versions */
-#define VIKING_REV_12           0x1   /* Version 1.2 or SPARCclassic's CPU */
-#define VIKING_REV_2            0x2   /* Version 2.1, 2.2, 2.3, and 2.4 */
-#define VIKING_REV_30           0x3   /* Version 3.0 */
-#define VIKING_REV_35           0x4   /* Version 3.5 */
-
-/* LSI Logics. */
-#define LSI_L64815		0x0
-
-/* Fujitsu */
-#define FMI_AURORA		0x4   /* MB8690x, a Swift module... */
-#define FMI_TURBO		0x5   /* MB86907, a TurboSparc module... */
-
-/* For multiprocessor support we need to be able to obtain the CPU id and
- * the MBUS Module id.
- */
-
-/* The CPU ID is encoded in the trap base register, 20 bits to the left of
- * bit zero, with 2 bits being significant.
- */
-#define TBR_ID_SHIFT            20
-
-static inline int get_cpuid(void)
-{
-	register int retval;
-	__asm__ __volatile__("rd %%tbr, %0\n\t"
-			     "srl %0, %1, %0\n\t" :
-			     "=r" (retval) :
-			     "i" (TBR_ID_SHIFT));
-	return (retval & 3);
-}
-
-static inline int get_modid(void)
-{
-	return (get_cpuid() | 0x8);
-}
-
-	
-#endif /* !(_SPARC_MBUS_H) */
diff --git a/include/asm-sparc/mc146818rtc.h b/include/asm-sparc/mc146818rtc.h
deleted file mode 100644
index fa7eac926582..000000000000
--- a/include/asm-sparc/mc146818rtc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef __ASM_SPARC_MC146818RTC_H
-#define __ASM_SPARC_MC146818RTC_H
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#define RTC_IRQ 8
-
-#endif /* __ASM_SPARC_MC146818RTC_H */
diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h
deleted file mode 100644
index 845ad2b39183..000000000000
--- a/include/asm-sparc/memreg.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _SPARC_MEMREG_H
-#define _SPARC_MEMREG_H
-/* memreg.h:  Definitions of the values found in the synchronous
- *            and asynchronous memory error registers when a fault
- *            occurs on the sun4c.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* First the synchronous error codes, these are usually just
- * normal page faults.
- */
-
-#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
-#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
-#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
-#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
-#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
-#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
-#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
-#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
-
-#define SUN4C_SYNC_BOLIXED  \
-        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
-         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
-
-/* Now the asynchronous error codes, these are almost always produced
- * by the cache writing things back to memory and getting a bad translation.
- * Bad DVMA transactions can cause these faults too.
- */
-
-#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
-#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
-#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
-
-/* Memory parity error register with associated bit constants. */
-#ifndef __ASSEMBLY__
-extern __volatile__ unsigned long __iomem *sun4c_memerr_reg;
-#endif
-
-#define	SUN4C_MPE_ERROR	0x80	/* Parity error detected. (ro) */
-#define	SUN4C_MPE_MULTI	0x40	/* Multiple parity errors detected. (ro) */
-#define	SUN4C_MPE_TEST	0x20	/* Write inverse parity. (rw) */
-#define	SUN4C_MPE_CHECK	0x10	/* Enable parity checking. (rw) */
-#define	SUN4C_MPE_ERR00	0x08	/* Parity error in bits 0-7. (ro) */
-#define	SUN4C_MPE_ERR08	0x04	/* Parity error in bits 8-15. (ro) */
-#define	SUN4C_MPE_ERR16	0x02	/* Parity error in bits 16-23. (ro) */
-#define	SUN4C_MPE_ERR24	0x01	/* Parity error in bits 24-31. (ro) */
-#define	SUN4C_MPE_ERRS	0x0F	/* Bit mask for the error bits. (ro) */
-
-#endif /* !(_SPARC_MEMREG_H) */
diff --git a/include/asm-sparc/mman.h b/include/asm-sparc/mman.h
deleted file mode 100644
index fdfbbf0a4736..000000000000
--- a/include/asm-sparc/mman.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __SPARC_MMAN_H__
-#define __SPARC_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-/* SunOS'ified... */
-
-#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
-#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
-#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
-#define MAP_LOCKED      0x100           /* lock the mapping */
-#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
-
-#define MAP_GROWSDOWN	0x0200		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-
-#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
-#define MCL_FUTURE      0x4000          /* lock all additions to address space */
-
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#define arch_mmap_check(addr,len,flags)	sparc_mmap_check(addr,len)
-int sparc_mmap_check(unsigned long addr, unsigned long len);
-#endif
-#endif
-
-#endif /* __SPARC_MMAN_H__ */
diff --git a/include/asm-sparc/mmu.h b/include/asm-sparc/mmu.h
deleted file mode 100644
index ccd36d26615a..000000000000
--- a/include/asm-sparc/mmu.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-/* Default "unsigned long" context */
-typedef unsigned long mm_context_t;
-
-#endif
diff --git a/include/asm-sparc/mmu_context.h b/include/asm-sparc/mmu_context.h
deleted file mode 100644
index 671a997b9e69..000000000000
--- a/include/asm-sparc/mmu_context.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __SPARC_MMU_CONTEXT_H
-#define __SPARC_MMU_CONTEXT_H
-
-#include <asm/btfixup.h>
-
-#ifndef __ASSEMBLY__
-
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * Initialize a new mmu context.  This is invoked when a new
- * address space instance (unique or shared) is instantiated.
- */
-#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
-
-/*
- * Destroy a dead context.  This occurs when mmput drops the
- * mm_users count to zero, the mmaps have been released, and
- * all the page tables have been flushed.  Our job is to destroy
- * any remaining processor-specific state.
- */
-BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *)
-
-#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm)
-
-/* Switch the current MM context. */
-BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *)
-
-#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk)
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-/* Activate a new MM instance for the current task. */
-#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_MMU_CONTEXT_H) */
diff --git a/include/asm-sparc/module.h b/include/asm-sparc/module.h
deleted file mode 100644
index cbd9e67b0c0b..000000000000
--- a/include/asm-sparc/module.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ASM_SPARC_MODULE_H
-#define _ASM_SPARC_MODULE_H
-struct mod_arch_specific { };
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-#endif /* _ASM_SPARC_MODULE_H */
diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h
deleted file mode 100644
index 29aad11b8f00..000000000000
--- a/include/asm-sparc/mostek.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * mostek.h:  Describes the various Mostek time of day clock registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
- */
-
-#ifndef _SPARC_MOSTEK_H
-#define _SPARC_MOSTEK_H
-
-#include <asm/idprom.h>
-#include <asm/io.h>
-
-/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
- *
- *                             Data
- * Address                                                 Function
- *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
- *   7ff  -     -     -     -    -     -     -     -       Year 00-99
- *   7fe  0     0     0     -    -     -     -     -      Month 01-12
- *   7fd  0     0     -     -    -     -     -     -       Date 01-31
- *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
- *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
- *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
- *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
- *   7f8  W     R     S     -    -     -     -     -    Control
- *
- *   * ST is STOP BIT
- *   * W is WRITE BIT
- *   * R is READ BIT
- *   * S is SIGN BIT
- *   * FT is FREQ TEST BIT
- *   * KS is KICK START BIT
- */
-
-/* The Mostek 48t02 real time clock and NVRAM chip. The registers
- * other than the control register are in binary coded decimal. Some
- * control bits also live outside the control register.
- */
-#define mostek_read(_addr)		readb(_addr)
-#define mostek_write(_addr,_val)	writeb(_val, _addr)
-#define MOSTEK_EEPROM		0x0000UL
-#define MOSTEK_IDPROM		0x07d8UL
-#define MOSTEK_CREG		0x07f8UL
-#define MOSTEK_SEC		0x07f9UL
-#define MOSTEK_MIN		0x07faUL
-#define MOSTEK_HOUR		0x07fbUL
-#define MOSTEK_DOW		0x07fcUL
-#define MOSTEK_DOM		0x07fdUL
-#define MOSTEK_MONTH		0x07feUL
-#define MOSTEK_YEAR		0x07ffUL
-
-struct mostek48t02 {
-	volatile char eeprom[2008];	/* This is the eeprom, don't touch! */
-	struct idprom idprom;		/* The idprom lives here. */
-	volatile unsigned char creg;	/* Control register */
-	volatile unsigned char sec;	/* Seconds (0-59) */
-	volatile unsigned char min;	/* Minutes (0-59) */
-	volatile unsigned char hour;	/* Hour (0-23) */
-	volatile unsigned char dow;	/* Day of the week (1-7) */
-	volatile unsigned char dom;	/* Day of the month (1-31) */
-	volatile unsigned char month;	/* Month of year (1-12) */
-	volatile unsigned char year;	/* Year (0-99) */
-};
-
-extern spinlock_t mostek_lock;
-extern void __iomem *mstk48t02_regs;
-
-/* Control register values. */
-#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
-#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
-#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
-
-/* Control bits that live in the other registers. */
-#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
-#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
-#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
-
-#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
-#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
-
-/* Masks that define how much space each value takes up. */
-#define	MSTK_SEC_MASK	0x7f
-#define	MSTK_MIN_MASK	0x7f
-#define	MSTK_HOUR_MASK	0x3f
-#define	MSTK_DOW_MASK	0x07
-#define	MSTK_DOM_MASK	0x3f
-#define	MSTK_MONTH_MASK	0x1f
-#define	MSTK_YEAR_MASK	0xffU
-
-/* Binary coded decimal conversion macros. */
-#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
-#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
-
-/* Generic register set and get macros for internal use. */
-#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
-#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
-
-/* Macros to make register access easier on our fingers. These give you
- * the decimal value of the register requested if applicable. You pass
- * the a pointer to a 'struct mostek48t02'.
- */
-#define	MSTK_REG_CREG(regs)	(((struct mostek48t02 *)regs)->creg)
-#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,sec,SEC)
-#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,min,MIN)
-#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,hour,HOUR)
-#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,dow,DOW)
-#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,dom,DOM)
-#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,month,MONTH)
-#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,year,YEAR)
-
-#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,sec,value,SEC)
-#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,min,value,MIN)
-#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,hour,value,HOUR)
-#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,dow,value,DOW)
-#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,dom,value,DOM)
-#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,month,value,MONTH)
-#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,year,value,YEAR)
-
-
-/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
- * same (basically) layout of the 48t02 chip except for the extra
- * NVRAM on board (8 KB against the 48t02's 2 KB).
- */
-struct mostek48t08 {
-	char offset[6*1024];         /* Magic things may be here, who knows? */
-	struct mostek48t02 regs;     /* Here is what we are interested in.   */
-};
-
-extern enum sparc_clock_type sp_clock_typ;
-
-#ifdef CONFIG_SUN4
-enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
-INTERSIL, MSTK_INVALID };
-#else
-enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
-MSTK_INVALID };
-#endif
-
-#ifdef CONFIG_SUN4
-/* intersil on a sun 4/260 code  data from harris doc */
-struct intersil_dt {
-        volatile unsigned char int_csec;
-        volatile unsigned char int_hour;
-        volatile unsigned char int_min;
-        volatile unsigned char int_sec;
-        volatile unsigned char int_month;
-        volatile unsigned char int_day;
-        volatile unsigned char int_year;
-        volatile unsigned char int_dow;
-};
-
-struct intersil {
-	struct intersil_dt clk;
-	struct intersil_dt cmp;
-	volatile unsigned char int_intr_reg;
-	volatile unsigned char int_cmd_reg;
-};
-
-#define INTERSIL_STOP        0x0
-#define INTERSIL_START       0x8
-#define INTERSIL_INTR_DISABLE   0x0
-#define INTERSIL_INTR_ENABLE   0x10
-#define INTERSIL_32K		0x0
-#define INTERSIL_NORMAL		0x0
-#define INTERSIL_24H		0x4 
-#define INTERSIL_INT_100HZ	0x2
-
-/* end of intersil info */
-#endif
-
-#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/include/asm-sparc/mpmbox.h b/include/asm-sparc/mpmbox.h
deleted file mode 100644
index f8423039b242..000000000000
--- a/include/asm-sparc/mpmbox.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * mpmbox.h:  Interface and defines for the OpenProm mailbox
- *               facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram.  You probe the device tree prom nodes
- * for these values.  The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING     0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT          0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN        0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN      0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP     0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/include/asm-sparc/msgbuf.h b/include/asm-sparc/msgbuf.h
deleted file mode 100644
index 8cec9ad0b825..000000000000
--- a/include/asm-sparc/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _SPARC64_MSGBUF_H
-#define _SPARC64_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for sparc64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	unsigned int   __pad1;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned int   __pad2;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned int   __pad3;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused1;
-	unsigned long  __unused2;
-};
-
-#endif /* _SPARC64_MSGBUF_H */
diff --git a/include/asm-sparc/msi.h b/include/asm-sparc/msi.h
deleted file mode 100644
index 724ca5667052..000000000000
--- a/include/asm-sparc/msi.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * msi.h:  Defines specific to the MBus - Sbus - Interface.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
- */
-
-#ifndef _SPARC_MSI_H
-#define _SPARC_MSI_H
-
-/*
- * Locations of MSI Registers.
- */
-#define MSI_MBUS_ARBEN	0xe0001008	/* MBus Arbiter Enable register */
-
-/*
- * Useful bits in the MSI Registers.
- */
-#define MSI_ASYNC_MODE  0x80000000	/* Operate the MSI asynchronously */
-
-
-static inline void msi_set_sync(void)
-{
-	__asm__ __volatile__ ("lda [%0] %1, %%g3\n\t"
-			      "andn %%g3, %2, %%g3\n\t"
-			      "sta %%g3, [%0] %1\n\t" : :
-			      "r" (MSI_MBUS_ARBEN),
-			      "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3");
-}
-
-#endif /* !(_SPARC_MSI_H) */
diff --git a/include/asm-sparc/mutex.h b/include/asm-sparc/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-sparc/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-sparc/mxcc.h b/include/asm-sparc/mxcc.h
deleted file mode 100644
index c0517bd05bde..000000000000
--- a/include/asm-sparc/mxcc.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * mxcc.h:  Definitions of the Viking MXCC registers
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MXCC_H
-#define _SPARC_MXCC_H
-
-/* These registers are accessed through ASI 0x2. */
-#define MXCC_DATSTREAM       0x1C00000  /* Data stream register */
-#define MXCC_SRCSTREAM       0x1C00100  /* Source stream register */
-#define MXCC_DESSTREAM       0x1C00200  /* Destination stream register */
-#define MXCC_RMCOUNT         0x1C00300  /* Count of references and misses */
-#define MXCC_STEST           0x1C00804  /* Internal self-test */
-#define MXCC_CREG            0x1C00A04  /* Control register */
-#define MXCC_SREG            0x1C00B00  /* Status register */
-#define MXCC_RREG            0x1C00C04  /* Reset register */
-#define MXCC_EREG            0x1C00E00  /* Error code register */
-#define MXCC_PREG            0x1C00F04  /* Address port register */
-
-/* Some MXCC constants. */
-#define MXCC_STREAM_SIZE     0x20       /* Size in bytes of one stream r/w */
-
-/* The MXCC Control Register:
- *
- * ----------------------------------------------------------------------
- * |                                   | RRC | RSV |PRE|MCE|PARE|ECE|RSV|
- * ----------------------------------------------------------------------
- *  31                              10    9    8-6   5   4    3   2  1-0
- *
- * RRC: Controls what you read from MXCC_RMCOUNT reg.
- *      0=Misses 1=References
- * PRE: Prefetch enable
- * MCE: Multiple Command Enable
- * PARE: Parity enable
- * ECE: External cache enable
- */
-
-#define MXCC_CTL_RRC   0x00000200
-#define MXCC_CTL_PRE   0x00000020
-#define MXCC_CTL_MCE   0x00000010
-#define MXCC_CTL_PARE  0x00000008
-#define MXCC_CTL_ECE   0x00000004
-
-/* The MXCC Error Register:
- *
- * --------------------------------------------------------
- * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR|
- * --------------------------------------------------------
- *  31   30 29  28  27  26  25 24-15  14-7   6  5-3   2-0
- *
- * ME: Multiple Errors have occurred
- * CE: Cache consistency Error
- * PEW: Parity Error during a Write operation
- * PEE: Parity Error involving the External cache
- * ASE: ASynchronous Error
- * EIV: This register is toast
- * MOPC: MXCC Operation Code for instance causing error
- * ECODE: The Error CODE
- * PRIV: A privileged mode error? 0=no 1=yes
- * HPADDR: High PhysicalADDRess bits (35-32)
- */
-
-#define MXCC_ERR_ME     0x80000000
-#define MXCC_ERR_CE     0x20000000
-#define MXCC_ERR_PEW    0x10000000
-#define MXCC_ERR_PEE    0x08000000
-#define MXCC_ERR_ASE    0x04000000
-#define MXCC_ERR_EIV    0x02000000
-#define MXCC_ERR_MOPC   0x01FF8000
-#define MXCC_ERR_ECODE  0x00007F80
-#define MXCC_ERR_PRIV   0x00000040
-#define MXCC_ERR_HPADDR 0x0000000f
-
-/* The MXCC Port register:
- *
- * -----------------------------------------------------
- * |                | MID |                            |
- * -----------------------------------------------------
- *  31            21 20-18 17                         0
- *
- * MID: The moduleID of the cpu your read this from.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline void mxcc_set_stream_src(unsigned long *paddr)
-{
-	unsigned long data0 = paddr[0];
-	unsigned long data1 = paddr[1];
-
-	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
-			      "or %%g0, %1, %%g3\n\t"
-			      "stda %%g2, [%2] %3\n\t" : :
-			      "r" (data0), "r" (data1),
-			      "r" (MXCC_SRCSTREAM),
-			      "i" (ASI_M_MXCC) : "g2", "g3");
-}
-
-static inline void mxcc_set_stream_dst(unsigned long *paddr)
-{
-	unsigned long data0 = paddr[0];
-	unsigned long data1 = paddr[1];
-
-	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
-			      "or %%g0, %1, %%g3\n\t"
-			      "stda %%g2, [%2] %3\n\t" : :
-			      "r" (data0), "r" (data1),
-			      "r" (MXCC_DESSTREAM),
-			      "i" (ASI_M_MXCC) : "g2", "g3");
-}
-
-static inline unsigned long mxcc_get_creg(void)
-{
-	unsigned long mxcc_control;
-
-	__asm__ __volatile__("set 0xffffffff, %%g2\n\t"
-			     "set 0xffffffff, %%g3\n\t"
-			     "stda %%g2, [%1] %2\n\t"
-			     "lda [%3] %2, %0\n\t" :
-			     "=r" (mxcc_control) :
-			     "r" (MXCC_EREG), "i" (ASI_M_MXCC),
-			     "r" (MXCC_CREG) : "g2", "g3");
-	return mxcc_control;
-}
-
-static inline void mxcc_set_creg(unsigned long mxcc_control)
-{
-	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
-			     "r" (mxcc_control), "r" (MXCC_CREG),
-			     "i" (ASI_M_MXCC));
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* !(_SPARC_MXCC_H) */
diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h
deleted file mode 100644
index 0646102fb020..000000000000
--- a/include/asm-sparc/namei.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-sparc/namei.h
- *
- * Routines to handle famous /usr/gnemul/s*.
- * Included from linux/fs/namei.c
- */
-
-#ifndef __SPARC_NAMEI_H
-#define __SPARC_NAMEI_H
-
-#define __emul_prefix() NULL
-
-#endif /* __SPARC_NAMEI_H */
diff --git a/include/asm-sparc/obio.h b/include/asm-sparc/obio.h
deleted file mode 100644
index 1a7544ceb574..000000000000
--- a/include/asm-sparc/obio.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * obio.h:  Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
- *
- * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
- */
-
-#ifndef _SPARC_OBIO_H
-#define _SPARC_OBIO_H
-
-#include <asm/asi.h>
-
-/* This weird monster likes to use the very upper parts of
-   36bit PA for these things :) */
-   
-/* CSR space (for each XDBUS)
- *  ------------------------------------------------------------------------
- *  |   0xFE  |   DEVID    |                | XDBUS ID |                   |
- *  ------------------------------------------------------------------------
- *  35      28 27        20 19            10 9        8 7                 0
- */
-   
-#define CSR_BASE_ADDR		0xe0000000
-#define CSR_CPU_SHIFT		(32 - 4 - 5)
-#define CSR_XDBUS_SHIFT		8
-
-#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT)
-
-/* ECSR space (not for each XDBUS)
- *  ------------------------------------------------------------------------
- *  |   0xF  | DEVID[7:1] |                			           |
- *  ------------------------------------------------------------------------
- *  35     32 31        25 24                 				  0
- */
-   
-#define ECSR_BASE_ADDR		0x00000000
-#define ECSR_CPU_SHIFT		(32 - 5)
-#define ECSR_DEV_SHIFT		(32 - 8)
-
-#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT)
-#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) 
-
-/* Bus Watcher */
-#define BW_LOCAL_BASE		0xfff00000
-
-#define BW_CID			0x00000000
-#define BW_DBUS_CTRL		0x00000008
-#define BW_DBUS_DATA		0x00000010
-#define BW_CTRL			0x00001000
-#define BW_INTR_TABLE		0x00001040
-#define BW_INTR_TABLE_CLEAR	0x00001080
-#define BW_PRESCALER		0x000010c0
-#define BW_PTIMER_LIMIT		0x00002000
-#define BW_PTIMER_COUNTER2	0x00002004
-#define BW_PTIMER_NDLIMIT	0x00002008
-#define BW_PTIMER_CTRL		0x0000200c
-#define BW_PTIMER_COUNTER	0x00002010
-#define BW_TIMER_LIMIT		0x00003000
-#define BW_TIMER_COUNTER2	0x00003004
-#define BW_TIMER_NDLIMIT	0x00003008
-#define BW_TIMER_CTRL		0x0000300c
-#define BW_TIMER_COUNTER	0x00003010
-
-/* BW Control */
-#define BW_CTRL_USER_TIMER	0x00000004	/* Is User Timer Free run enabled */
-
-/* Boot Bus */
-#define BB_LOCAL_BASE		0xf0000000
-
-#define BB_STAT1		0x00100000
-#define BB_STAT2		0x00120000
-#define BB_STAT3		0x00140000
-#define BB_LEDS			0x002e0000
-
-/* Bits in BB_STAT2 */
-#define BB_STAT2_AC_INTR	0x04	/* Aiee! 5ms and power is gone... */
-#define BB_STAT2_TMP_INTR	0x10	/* My Penguins are burning. Are you able to smell it? */
-#define BB_STAT2_FAN_INTR	0x20	/* My fan refuses to work */
-#define BB_STAT2_PWR_INTR	0x40	/* On SC2000, one of the two ACs died. Ok, we go on... */
-#define BB_STAT2_MASK		(BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR)
-
-/* Cache Controller */
-#define CC_BASE		0x1F00000
-#define CC_DATSTREAM	0x1F00000  /* Data stream register */
-#define CC_DATSIZE	0x1F0003F  /* Size */
-#define CC_SRCSTREAM	0x1F00100  /* Source stream register */
-#define CC_DESSTREAM	0x1F00200  /* Destination stream register */
-#define CC_RMCOUNT	0x1F00300  /* Count of references and misses */
-#define CC_IPEN		0x1F00406  /* Pending Interrupts */
-#define CC_IMSK		0x1F00506  /* Interrupt Mask */
-#define CC_ICLR		0x1F00606  /* Clear pending Interrupts */
-#define CC_IGEN		0x1F00704  /* Generate Interrupt register */
-#define CC_STEST	0x1F00804  /* Internal self-test */
-#define CC_CREG		0x1F00A04  /* Control register */
-#define CC_SREG		0x1F00B00  /* Status register */
-#define CC_RREG		0x1F00C04  /* Reset register */
-#define CC_EREG		0x1F00E00  /* Error code register */
-#define CC_CID		0x1F00F04  /* Component ID */
-
-#ifndef __ASSEMBLY__
-
-static inline int bw_get_intr_mask(int sbus_level)
-{
-	int mask;
-	
-	__asm__ __volatile__ ("lduha [%1] %2, %0" :
-			      "=r" (mask) :
-			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)),
-			      "i" (ASI_M_CTL));
-	return mask;
-}
-
-static inline void bw_clear_intr_mask(int sbus_level, int mask)
-{
-	__asm__ __volatile__ ("stha %0, [%1] %2" : :
-			      "r" (mask),
-			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)),
-			      "i" (ASI_M_CTL));
-}
-
-static inline unsigned bw_get_prof_limit(int cpu)
-{
-	unsigned limit;
-	
-	__asm__ __volatile__ ("lda [%1] %2, %0" :
-			      "=r" (limit) :
-			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
-			      "i" (ASI_M_CTL));
-	return limit;
-}
-
-static inline void bw_set_prof_limit(int cpu, unsigned limit)
-{
-	__asm__ __volatile__ ("sta %0, [%1] %2" : :
-			      "r" (limit),
-			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
-			      "i" (ASI_M_CTL));
-}
-
-static inline unsigned bw_get_ctrl(int cpu)
-{
-	unsigned ctrl;
-	
-	__asm__ __volatile__ ("lda [%1] %2, %0" :
-			      "=r" (ctrl) :
-			      "r" (CSR_BASE(cpu) + BW_CTRL),
-			      "i" (ASI_M_CTL));
-	return ctrl;
-}
-
-static inline void bw_set_ctrl(int cpu, unsigned ctrl)
-{
-	__asm__ __volatile__ ("sta %0, [%1] %2" : :
-			      "r" (ctrl),
-			      "r" (CSR_BASE(cpu) + BW_CTRL),
-			      "i" (ASI_M_CTL));
-}
-
-extern unsigned char cpu_leds[32];
-
-static inline void show_leds(int cpuid)
-{
-	cpuid &= 0x1e;
-	__asm__ __volatile__ ("stba %0, [%1] %2" : :
-			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
-			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
-			      "i" (ASI_M_CTL));
-}
-
-static inline unsigned cc_get_ipen(void)
-{
-	unsigned pending;
-	
-	__asm__ __volatile__ ("lduha [%1] %2, %0" :
-			      "=r" (pending) :
-			      "r" (CC_IPEN),
-			      "i" (ASI_M_MXCC));
-	return pending;
-}
-
-static inline void cc_set_iclr(unsigned clear)
-{
-	__asm__ __volatile__ ("stha %0, [%1] %2" : :
-			      "r" (clear),
-			      "r" (CC_ICLR),
-			      "i" (ASI_M_MXCC));
-}
-
-static inline unsigned cc_get_imsk(void)
-{
-	unsigned mask;
-	
-	__asm__ __volatile__ ("lduha [%1] %2, %0" :
-			      "=r" (mask) :
-			      "r" (CC_IMSK),
-			      "i" (ASI_M_MXCC));
-	return mask;
-}
-
-static inline void cc_set_imsk(unsigned mask)
-{
-	__asm__ __volatile__ ("stha %0, [%1] %2" : :
-			      "r" (mask),
-			      "r" (CC_IMSK),
-			      "i" (ASI_M_MXCC));
-}
-
-static inline unsigned cc_get_imsk_other(int cpuid)
-{
-	unsigned mask;
-	
-	__asm__ __volatile__ ("lduha [%1] %2, %0" :
-			      "=r" (mask) :
-			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
-			      "i" (ASI_M_CTL));
-	return mask;
-}
-
-static inline void cc_set_imsk_other(int cpuid, unsigned mask)
-{
-	__asm__ __volatile__ ("stha %0, [%1] %2" : :
-			      "r" (mask),
-			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
-			      "i" (ASI_M_CTL));
-}
-
-static inline void cc_set_igen(unsigned gen)
-{
-	__asm__ __volatile__ ("sta %0, [%1] %2" : :
-			      "r" (gen),
-			      "r" (CC_IGEN),
-			      "i" (ASI_M_MXCC));
-}
-
-/* +-------+-------------+-----------+------------------------------------+
- * | bcast |  devid      |   sid     |              levels mask           |
- * +-------+-------------+-----------+------------------------------------+
- *  31      30         23 22       15 14                                 0
- */
-#define IGEN_MESSAGE(bcast, devid, sid, levels) \
-	(((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels))
-            
-static inline void sun4d_send_ipi(int cpu, int level)
-{
-	cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1)));
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* !(_SPARC_OBIO_H) */
diff --git a/include/asm-sparc/of_device.h b/include/asm-sparc/of_device.h
deleted file mode 100644
index e5f5aedc2293..000000000000
--- a/include/asm-sparc/of_device.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_SPARC_OF_DEVICE_H
-#define _ASM_SPARC_OF_DEVICE_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/of.h>
-#include <linux/mod_devicetable.h>
-#include <asm/openprom.h>
-
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
-	struct device_node		*node;
-	struct device			dev;
-	struct resource			resource[PROMREG_MAX];
-	unsigned int			irqs[PROMINTR_MAX];
-	int				num_irqs;
-
-	void				*sysdata;
-
-	int				slot;
-	int				portid;
-	int				clock_freq;
-};
-
-extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
-extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
-
-/* These are just here during the transition */
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/include/asm-sparc/of_platform.h b/include/asm-sparc/of_platform.h
deleted file mode 100644
index 38334351c36b..000000000000
--- a/include/asm-sparc/of_platform.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _ASM_SPARC_OF_PLATFORM_H
-#define _ASM_SPARC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm-sparc/of_device.h
- *		by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type	of_platform_bus_type	/* for compatibility */
-
-#endif	/* _ASM_SPARC_OF_PLATFORM_H */
diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h
deleted file mode 100644
index ed4b6bc2b102..000000000000
--- a/include/asm-sparc/openprom.h
+++ /dev/null
@@ -1,257 +0,0 @@
-#ifndef __SPARC_OPENPROM_H
-#define __SPARC_OPENPROM_H
-
-/* openprom.h:  Prom structures and defines for access to the OPENBOOT
- *              prom routines and data areas.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <asm/vaddrs.h>
-
-/* Empirical constants... */
-#define	LINUX_OPPROM_MAGIC      0x10010407
-
-#ifndef __ASSEMBLY__
-/* V0 prom device operations. */
-struct linux_dev_v0_funcs {
-	int (*v0_devopen)(char *device_str);
-	int (*v0_devclose)(int dev_desc);
-	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
-};
-
-/* V2 and later prom device operations. */
-struct linux_dev_v2_funcs {
-	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
-	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
-	void (*v2_dumb_mem_free)(char *va, unsigned sz);
-
-	/* To map devices into virtual I/O space. */
-	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
-	void (*v2_dumb_munmap)(char *virta, unsigned size);
-
-	int (*v2_dev_open)(char *devpath);
-	void (*v2_dev_close)(int d);
-	int (*v2_dev_read)(int d, char *buf, int nbytes);
-	int (*v2_dev_write)(int d, char *buf, int nbytes);
-	int (*v2_dev_seek)(int d, int hi, int lo);
-
-	/* Never issued (multistage load support) */
-	void (*v2_wheee2)(void);
-	void (*v2_wheee3)(void);
-};
-
-struct linux_mlist_v0 {
-	struct linux_mlist_v0 *theres_more;
-	char *start_adr;
-	unsigned num_bytes;
-};
-
-struct linux_mem_v0 {
-	struct linux_mlist_v0 **v0_totphys;
-	struct linux_mlist_v0 **v0_prommap;
-	struct linux_mlist_v0 **v0_available; /* What we can use */
-};
-
-/* Arguments sent to the kernel from the boot prompt. */
-struct linux_arguments_v0 {
-	char *argv[8];
-	char args[100];
-	char boot_dev[2];
-	int boot_dev_ctrl;
-	int boot_dev_unit;
-	int dev_partition;
-	char *kernel_file_name;
-	void *aieee1;           /* XXX */
-};
-
-/* V2 and up boot things. */
-struct linux_bootargs_v2 {
-	char **bootpath;
-	char **bootargs;
-	int *fd_stdin;
-	int *fd_stdout;
-};
-
-/* The top level PROM vector. */
-struct linux_romvec {
-	/* Version numbers. */
-	unsigned int pv_magic_cookie;
-	unsigned int pv_romvers;
-	unsigned int pv_plugin_revision;
-	unsigned int pv_printrev;
-
-	/* Version 0 memory descriptors. */
-	struct linux_mem_v0 pv_v0mem;
-
-	/* Node operations. */
-	struct linux_nodeops *pv_nodeops;
-
-	char **pv_bootstr;
-	struct linux_dev_v0_funcs pv_v0devops;
-
-	char *pv_stdin;
-	char *pv_stdout;
-#define	PROMDEV_KBD	0		/* input from keyboard */
-#define	PROMDEV_SCREEN	0		/* output to screen */
-#define	PROMDEV_TTYA	1		/* in/out to ttya */
-#define	PROMDEV_TTYB	2		/* in/out to ttyb */
-
-	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
-	int (*pv_getchar)(void);
-	void (*pv_putchar)(int ch);
-
-	/* Non-blocking variants. */
-	int (*pv_nbgetchar)(void);
-	int (*pv_nbputchar)(int ch);
-
-	void (*pv_putstr)(char *str, int len);
-
-	/* Miscellany. */
-	void (*pv_reboot)(char *bootstr);
-	void (*pv_printf)(__const__ char *fmt, ...);
-	void (*pv_abort)(void);
-	__volatile__ int *pv_ticks;
-	void (*pv_halt)(void);
-	void (**pv_synchook)(void);
-
-	/* Evaluate a forth string, not different proto for V0 and V2->up. */
-	union {
-		void (*v0_eval)(int len, char *str);
-		void (*v2_eval)(char *str);
-	} pv_fortheval;
-
-	struct linux_arguments_v0 **pv_v0bootargs;
-
-	/* Get ether address. */
-	unsigned int (*pv_enaddr)(int d, char *enaddr);
-
-	struct linux_bootargs_v2 pv_v2bootargs;
-	struct linux_dev_v2_funcs pv_v2devops;
-
-	int filler[15];
-
-	/* This one is sun4c/sun4 only. */
-	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
-
-	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
-	 * No joke. Calling these when there is only one cpu probably
-	 * crashes the machine, have to test this. :-)
-	 */
-
-	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
-	 * 'thiscontext' executing at address 'prog_counter'
-	 */
-	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
-			   int thiscontext, char *prog_counter);
-
-	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
-	 * until a resume cpu call is made.
-	 */
-	int (*v3_cpustop)(unsigned int whichcpu);
-
-	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
-	 * resume cpu call is made.
-	 */
-	int (*v3_cpuidle)(unsigned int whichcpu);
-
-	/* v3_cpuresume() will resume processor 'whichcpu' executing
-	 * starting with whatever 'pc' and 'npc' were left at the
-	 * last 'idle' or 'stop' call.
-	 */
-	int (*v3_cpuresume)(unsigned int whichcpu);
-};
-
-/* Routines for traversing the prom device tree. */
-struct linux_nodeops {
-	int (*no_nextnode)(int node);
-	int (*no_child)(int node);
-	int (*no_proplen)(int node, char *name);
-	int (*no_getprop)(int node, char *name, char *val);
-	int (*no_setprop)(int node, char *name, char *val, int len);
-	char * (*no_nextprop)(int node, char *name);
-};
-
-/* More fun PROM structures for device probing. */
-#define PROMREG_MAX     16
-#define PROMVADDR_MAX   16
-#define PROMINTR_MAX    15
-
-struct linux_prom_registers {
-	unsigned int which_io;         /* is this in OBIO space? */
-	unsigned int phys_addr;        /* The physical address of this register */
-	unsigned int reg_size;         /* How many bytes does this register take up? */
-};
-
-struct linux_prom_irqs {
-	int pri;    /* IRQ priority */
-	int vector; /* This is foobar, what does it do? */
-};
-
-/* Element of the "ranges" vector */
-struct linux_prom_ranges {
-	unsigned int ot_child_space;
-	unsigned int ot_child_base;		/* Bus feels this */
-	unsigned int ot_parent_space;
-	unsigned int ot_parent_base;		/* CPU looks from here */
-	unsigned int or_size;
-};
-
-/* Ranges and reg properties are a bit different for PCI. */
-struct linux_prom_pci_registers {
-	/* 
-	 * We don't know what information this field contain.
-	 * We guess, PCI device function is in bits 15:8
-	 * So, ...
-	 */
-	unsigned int which_io;  /* Let it be which_io */
-
-	unsigned int phys_hi;
-	unsigned int phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_pci_ranges {
-	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
-	unsigned int child_phys_mid;
-	unsigned int child_phys_lo;
-
-	unsigned int parent_phys_hi;
-	unsigned int parent_phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_pci_assigned_addresses {
-	unsigned int which_io;
-
-	unsigned int phys_hi;
-	unsigned int phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_ebus_ranges {
-	unsigned int child_phys_hi;
-	unsigned int child_phys_lo;
-
-	unsigned int parent_phys_hi;
-	unsigned int parent_phys_mid;
-	unsigned int parent_phys_lo;
-
-	unsigned int size;
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/include/asm-sparc/openpromio.h b/include/asm-sparc/openpromio.h
deleted file mode 100644
index 917fb8e9c633..000000000000
--- a/include/asm-sparc/openpromio.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef	_SPARC_OPENPROMIO_H
-#define	_SPARC_OPENPROMIO_H
-
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * SunOS and Solaris /dev/openprom definitions. The ioctl values
- * were chosen to be exactly equal to the SunOS equivalents.
- */
-
-struct openpromio
-{
-	u_int	oprom_size;		/* Actual size of the oprom_array. */
-	char	oprom_array[1];		/* Holds property names and values. */
-};
-
-#define	OPROMMAXPARAM	4096		/* Maximum size of oprom_array. */
-
-#define	OPROMGETOPT		0x20004F01
-#define	OPROMSETOPT		0x20004F02
-#define	OPROMNXTOPT		0x20004F03
-#define	OPROMSETOPT2		0x20004F04
-#define	OPROMNEXT		0x20004F05
-#define	OPROMCHILD		0x20004F06
-#define	OPROMGETPROP		0x20004F07
-#define	OPROMNXTPROP		0x20004F08
-#define	OPROMU2P		0x20004F09
-#define	OPROMGETCONS		0x20004F0A
-#define	OPROMGETFBNAME		0x20004F0B
-#define	OPROMGETBOOTARGS	0x20004F0C
-/* Linux extensions */				/* Arguments in oprom_array: */
-#define OPROMSETCUR		0x20004FF0	/* int node - Sets current node */
-#define OPROMPCI2NODE		0x20004FF1	/* int pci_bus, pci_devfn - Sets current node to PCI device's node */
-#define OPROMPATH2NODE		0x20004FF2	/* char path[] - Set current node from fully qualified PROM path */
-
-/*
- * Return values from OPROMGETCONS:
- */
-
-#define OPROMCONS_NOT_WSCONS    0
-#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
-#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
-#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
-
-
-/*
- *  NetBSD/OpenBSD /dev/openprom definitions.
- */
-
-struct opiocdesc
-{
-	int	op_nodeid;		/* PROM Node ID (value-result) */
-	int	op_namelen;		/* Length of op_name. */
-	char	__user *op_name;	/* Pointer to the property name. */
-	int	op_buflen;		/* Length of op_buf (value-result) */
-	char	__user *op_buf;		/* Pointer to buffer. */
-};
-
-#define	OPIOCGET	_IOWR('O', 1, struct opiocdesc)
-#define	OPIOCSET	_IOW('O', 2, struct opiocdesc)
-#define	OPIOCNEXTPROP	_IOWR('O', 3, struct opiocdesc)
-#define	OPIOCGETOPTNODE	_IOR('O', 4, int)
-#define	OPIOCGETNEXT	_IOWR('O', 5, int)
-#define	OPIOCGETCHILD	_IOWR('O', 6, int)
-
-#endif /* _SPARC_OPENPROMIO_H */
-
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
deleted file mode 100644
index 61c3ca6a8ac3..000000000000
--- a/include/asm-sparc/oplib.h
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * oplib.h:  Describes the interface and available routines in the
- *           Linux Prom library.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __SPARC_OPLIB_H
-#define __SPARC_OPLIB_H
-
-#include <asm/openprom.h>
-#include <linux/spinlock.h>
-#include <linux/compiler.h>
-
-/* The master romvec pointer... */
-extern struct linux_romvec *romvec;
-
-/* Enumeration to describe the prom major version we have detected. */
-enum prom_major_version {
-	PROM_V0,      /* Original sun4c V0 prom */
-	PROM_V2,      /* sun4c and early sun4m V2 prom */
-	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
-	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
-        PROM_AP1000,  /* actually no prom at all */
-	PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
-};
-
-extern enum prom_major_version prom_vers;
-/* Revision, and firmware revision. */
-extern unsigned int prom_rev, prom_prev;
-
-/* Root node of the prom device tree, this stays constant after
- * initialization is complete.
- */
-extern int prom_root_node;
-
-/* Pointer to prom structure containing the device tree traversal
- * and usage utility functions.  Only prom-lib should use these,
- * users use the interface defined by the library only!
- */
-extern struct linux_nodeops *prom_nodeops;
-
-/* The functions... */
-
-/* You must call prom_init() before using any of the library services,
- * preferably as early as possible.  Pass it the romvec pointer.
- */
-extern void prom_init(struct linux_romvec *rom_ptr);
-
-/* Boot argument acquisition, returns the boot command line string. */
-extern char *prom_getbootargs(void);
-
-/* Device utilities. */
-
-/* Map and unmap devices in IO space at virtual addresses. Note that the
- * virtual address you pass is a request and the prom may put your mappings
- * somewhere else, so check your return value as that is where your new
- * mappings really are!
- *
- * Another note, these are only available on V2 or higher proms!
- */
-extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
-extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
-
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
-/* Miscellaneous routines, don't really fit in any category per se. */
-
-/* Reboot the machine with the command line passed. */
-extern void prom_reboot(char *boot_command);
-
-/* Evaluate the forth string passed. */
-extern void prom_feval(char *forth_string);
-
-/* Enter the prom, with possibility of continuation with the 'go'
- * command in newer proms.
- */
-extern void prom_cmdline(void);
-
-/* Enter the prom, with no chance of continuation for the stand-alone
- * which calls this.
- */
-extern void prom_halt(void) __attribute__ ((noreturn));
-
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
- */
-typedef void (*sync_func_t)(void);
-extern void prom_setsync(sync_func_t func_ptr);
-
-/* Acquire the IDPROM of the root node in the prom device tree.  This
- * gets passed a buffer where you would like it stuffed.  The return value
- * is the format type of this idprom or 0xff on error.
- */
-extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
-
-/* Get the prom major version. */
-extern int prom_version(void);
-
-/* Get the prom plugin revision. */
-extern int prom_getrev(void);
-
-/* Get the prom firmware revision. */
-extern int prom_getprev(void);
-
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
-
-/* Prom's internal routines, don't use in kernel/boot code. */
-extern void prom_printf(char *fmt, ...);
-extern void prom_write(const char *buf, unsigned int len);
-
-/* Multiprocessor operations... */
-
-/* Start the CPU with the given device tree node, context table, and context
- * at the passed program counter.
- */
-extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
-			 int context, char *program_counter);
-
-/* Stop the CPU with the passed device tree node. */
-extern int prom_stopcpu(int cpunode);
-
-/* Idle the CPU with the passed device tree node. */
-extern int prom_idlecpu(int cpunode);
-
-/* Re-Start the CPU with the passed device tree node. */
-extern int prom_restartcpu(int cpunode);
-
-/* PROM memory allocation facilities... */
-
-/* Allocated at possibly the given virtual address a chunk of the
- * indicated size.
- */
-extern char *prom_alloc(char *virt_hint, unsigned int size);
-
-/* Free a previously allocated chunk. */
-extern void prom_free(char *virt_addr, unsigned int size);
-
-/* Sun4/sun4c specific memory-management startup hook. */
-
-/* Map the passed segment in the given context at the passed
- * virtual address.
- */
-extern void prom_putsegment(int context, unsigned long virt_addr,
-			    int physical_segment);
-
-
-/* PROM device tree traversal functions... */
-
-#ifdef PROMLIB_INTERNAL
-
-/* Internal version of prom_getchild. */
-extern int __prom_getchild(int parent_node);
-
-/* Internal version of prom_getsibling. */
-extern int __prom_getsibling(int node);
-
-#endif
-
-
-/* Get the child node of the given node, or zero if no child exists. */
-extern int prom_getchild(int parent_node);
-
-/* Get the next sibling node of the given node, or zero if no further
- * siblings exist.
- */
-extern int prom_getsibling(int node);
-
-/* Get the length, at the passed node, of the given property type.
- * Returns -1 on error (ie. no such property at this node).
- */
-extern int prom_getproplen(int thisnode, char *property);
-
-/* Fetch the requested property using the given buffer.  Returns
- * the number of bytes the prom put into your buffer or -1 on error.
- */
-extern int __must_check prom_getproperty(int thisnode, char *property,
-					 char *prop_buffer, int propbuf_size);
-
-/* Acquire an integer property. */
-extern int prom_getint(int node, char *property);
-
-/* Acquire an integer property, with a default value. */
-extern int prom_getintdefault(int node, char *property, int defval);
-
-/* Acquire a boolean property, 0=FALSE 1=TRUE. */
-extern int prom_getbool(int node, char *prop);
-
-/* Acquire a string property, null string on error. */
-extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
-
-/* Does the passed node have the given "name"? YES=1 NO=0 */
-extern int prom_nodematch(int thisnode, char *name);
-
-/* Search all siblings starting at the passed node for "name" matching
- * the given string.  Returns the node on success, zero on failure.
- */
-extern int prom_searchsiblings(int node_start, char *name);
-
-/* Return the first property type, as a string, for the given node.
- * Returns a null string on error.
- */
-extern char *prom_firstprop(int node, char *buffer);
-
-/* Returns the next property after the passed property for the given
- * node.  Returns null string on failure.
- */
-extern char *prom_nextprop(int node, char *prev_property, char *buffer);
-
-/* Returns phandle of the path specified */
-extern int prom_finddevice(char *name);
-
-/* Returns 1 if the specified node has given property. */
-extern int prom_node_has_property(int node, char *property);
-
-/* Set the indicated property at the given node with the passed value.
- * Returns the number of bytes of your value that the prom took.
- */
-extern int prom_setprop(int node, char *prop_name, char *prop_value,
-			int value_size);
-			
-extern int prom_pathtoinode(char *path);
-extern int prom_inst2pkg(int);
-
-/* Dorking with Bus ranges... */
-
-/* Apply promlib probes OBIO ranges to registers. */
-extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
-
-/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
-extern void prom_apply_generic_ranges(int node, int parent, 
-				      struct linux_prom_registers *sbusregs, int nregs);
-
-/* CPU probing helpers.  */
-int cpu_find_by_instance(int instance, int *prom_node, int *mid);
-int cpu_find_by_mid(int mid, int *prom_node);
-int cpu_get_hwmid(int prom_node);
-
-extern spinlock_t prom_lock;
-
-#endif /* !(__SPARC_OPLIB_H) */
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
deleted file mode 100644
index 6aa9e4c910cf..000000000000
--- a/include/asm-sparc/page.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * page.h:  Various defines and such for MMU operations on the Sparc for
- *          the Linux kernel.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_PAGE_H
-#define _SPARC_PAGE_H
-
-#ifdef CONFIG_SUN4
-#define PAGE_SHIFT   13
-#else
-#define PAGE_SHIFT   12
-#endif
-#ifndef __ASSEMBLY__
-/* I have my suspicions... -DaveM */
-#define PAGE_SIZE    (1UL << PAGE_SHIFT)
-#else
-#define PAGE_SIZE    (1 << PAGE_SHIFT)
-#endif
-#define PAGE_MASK    (~(PAGE_SIZE-1))
-
-#include <asm/btfixup.h>
-
-#ifndef __ASSEMBLY__
-
-#define clear_page(page)	 memset((void *)(page), 0, PAGE_SIZE)
-#define copy_page(to,from) 	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
-#define clear_user_page(addr, vaddr, page)	\
-	do { 	clear_page(addr);		\
-		sparc_flush_page_to_ram(page);	\
-	} while (0)
-#define copy_user_page(to, from, vaddr, page)	\
-	do {	copy_page(to, from);		\
-		sparc_flush_page_to_ram(page);	\
-	} while (0)
-
-/* The following structure is used to hold the physical
- * memory configuration of the machine.  This is filled in
- * prom_meminit() and is later used by mem_init() to set up
- * mem_map[].  We statically allocate SPARC_PHYS_BANKS+1 of
- * these structs, this is arbitrary.  The entry after the
- * last valid one has num_bytes==0.
- */
-struct sparc_phys_banks {
-  unsigned long base_addr;
-  unsigned long num_bytes;
-};
-
-#define SPARC_PHYS_BANKS 32
-
-extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
-
-/* Cache alias structure.  Entry is valid if context != -1. */
-struct cache_palias {
-	unsigned long vaddr;
-	int context;
-};
-
-extern struct cache_palias *sparc_aliases;
-
-/* passing structs on the Sparc slow us down tremendously... */
-
-/* #define STRICT_MM_TYPECHECKS */
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long iopte; } iopte_t;
-typedef struct { unsigned long pmdv[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long ctxd; } ctxd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct { unsigned long iopgprot; } iopgprot_t;
-
-#define pte_val(x)	((x).pte)
-#define iopte_val(x)	((x).iopte)
-#define pmd_val(x)      ((x).pmdv[0])
-#define pgd_val(x)	((x).pgd)
-#define ctxd_val(x)	((x).ctxd)
-#define pgprot_val(x)	((x).pgprot)
-#define iopgprot_val(x)	((x).iopgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __iopte(x)	((iopte_t) { (x) } )
-/* #define __pmd(x)        ((pmd_t) { (x) } ) */ /* XXX procedure with loop */
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __ctxd(x)	((ctxd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-#define __iopgprot(x)	((iopgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef unsigned long pte_t;
-typedef unsigned long iopte_t;
-typedef struct { unsigned long pmdv[16]; } pmd_t;
-typedef unsigned long pgd_t;
-typedef unsigned long ctxd_t;
-typedef unsigned long pgprot_t;
-typedef unsigned long iopgprot_t;
-
-#define pte_val(x)	(x)
-#define iopte_val(x)	(x)
-#define pmd_val(x)      ((x).pmdv[0])
-#define pgd_val(x)	(x)
-#define ctxd_val(x)	(x)
-#define pgprot_val(x)	(x)
-#define iopgprot_val(x)	(x)
-
-#define __pte(x)	(x)
-#define __iopte(x)	(x)
-/* #define __pmd(x)        (x) */ /* XXX later */
-#define __pgd(x)	(x)
-#define __ctxd(x)	(x)
-#define __pgprot(x)	(x)
-#define __iopgprot(x)	(x)
-
-#endif
-
-typedef struct page *pgtable_t;
-
-extern unsigned long sparc_unmapped_base;
-
-BTFIXUPDEF_SETHI(sparc_unmapped_base)
-
-#define TASK_UNMAPPED_BASE	BTFIXUP_SETHI(sparc_unmapped_base)
-
-#else /* !(__ASSEMBLY__) */
-
-#define __pgprot(x)	(x)
-
-#endif /* !(__ASSEMBLY__) */
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)  (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-#define PAGE_OFFSET	0xf0000000
-#ifndef __ASSEMBLY__
-extern unsigned long phys_base;
-extern unsigned long pfn_base;
-#endif
-#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET + phys_base)
-#define __va(x)			((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET))
-
-#define virt_to_phys		__pa
-#define phys_to_virt		__va
-
-#define ARCH_PFN_OFFSET		(pfn_base)
-#define virt_to_page(kaddr)	(mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
-
-#define pfn_valid(pfn)		(((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
-#define virt_addr_valid(kaddr)	((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif /* _SPARC_PAGE_H */
diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h
deleted file mode 100644
index 9836d9a3cb9a..000000000000
--- a/include/asm-sparc/param.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASMSPARC_PARAM_H
-#define _ASMSPARC_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif
diff --git a/include/asm-sparc/pbm.h b/include/asm-sparc/pbm.h
deleted file mode 100644
index 458a4916d14d..000000000000
--- a/include/asm-sparc/pbm.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *
- * pbm.h: PCI bus module pseudo driver software state
- *        Adopted from sparc64 by V. Roganov and G. Raiko
- *
- * Original header:
- * pbm.h: U2P PCI bus module pseudo driver software state.
- *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- *
- * To put things into perspective, consider sparc64 with a few PCI controllers.
- * Each type would have an own structure, with instances related one to one.
- * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h.
- * All three represent different abstractions.
- *   pci_bus  - Linux PCI subsystem view of a PCI bus (including bridged buses)
- *   pbm      - Arch-specific view of a PCI bus (sparc or sparc64)
- *   pcic     - Chip-specific information for PCIC.
- */
-
-#ifndef __SPARC_PBM_H
-#define __SPARC_PBM_H
-
-#include <linux/pci.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-
-struct linux_pbm_info {
-	int		prom_node;
-	char		prom_name[64];
-	/* struct linux_prom_pci_ranges	pbm_ranges[PROMREG_MAX]; */
-	/* int		num_pbm_ranges; */
-
-	/* Now things for the actual PCI bus probes. */
-	unsigned int	pci_first_busno;	/* Can it be nonzero? */
-	struct pci_bus	*pci_bus;		/* Was inline, MJ allocs now */
-};
-
-/* PCI devices which are not bridges have this placed in their pci_dev
- * sysdata member.  This makes OBP aware PCI device drivers easier to
- * code.
- */
-struct pcidev_cookie {
-	struct linux_pbm_info		*pbm;
-	struct device_node		*prom_node;
-};
-
-#endif /* !(__SPARC_PBM_H) */
diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h
deleted file mode 100644
index b93b6c79e08f..000000000000
--- a/include/asm-sparc/pci.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef __SPARC_PCI_H
-#define __SPARC_PCI_H
-
-#ifdef __KERNEL__
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- * already-configured bus numbers - to be used for buggy BIOSes
- * or architectures with incomplete PCI setup by the loader.
- */
-#define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
-
-#define PCIBIOS_MIN_IO		0UL
-#define PCIBIOS_MIN_MEM		0UL
-
-#define PCI_IRQ_NONE		0xffffffff
-
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/* Dynamic DMA mapping stuff.
- */
-#define PCI_DMA_BUS_IS_PHYS	(0)
-
-#include <asm/scatterlist.h>
-
-struct pci_dev;
-
-/* Allocate and map kernel buffer using consistent mode DMA for a device.
- * hwdev should be valid struct pci_dev pointer for PCI devices.
- */
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
-
-/* Free and unmap a consistent DMA buffer.
- * cpu_addr is what was returned from pci_alloc_consistent,
- * size must be the same as what as passed into pci_alloc_consistent,
- * and likewise dma_addr must be the same as what *dma_addrp was set to.
- *
- * References to the memory and mappings assosciated with cpu_addr/dma_addr
- * past this call are illegal.
- */
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
- */
-extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
-
-/* Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-/*
- * Same as above, only with pages instead of mapped addresses.
- */
-extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
-			unsigned long offset, size_t size, int direction);
-extern void pci_unmap_page(struct pci_dev *hwdev,
-			dma_addr_t dma_address, size_t size, int direction);
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, you
- * must first perform a pci_dma_sync_for_device, and then the device
- * again owns the buffer.
- */
-extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single_* but for a scatter-gather list,
- * same rules and usage.
- */
-extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
-	return 1;
-}
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
-
-static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
-{
-        return (dma_addr == PCI_DMA_ERROR_CODE);
-}
-
-struct device_node;
-extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
-
-#endif /* __KERNEL__ */
-
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
-#endif /* __SPARC_PCI_H */
diff --git a/include/asm-sparc/pcic.h b/include/asm-sparc/pcic.h
deleted file mode 100644
index f20ef562b265..000000000000
--- a/include/asm-sparc/pcic.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * pcic.h: JavaEngine 1 specific PCI definitions.
- *
- * Copyright (C) 1998 V. Roganov and G. Raiko
- */
-
-#ifndef __SPARC_PCIC_H
-#define __SPARC_PCIC_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/smp.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <asm/pbm.h>
-
-struct linux_pcic {
-        void __iomem            *pcic_regs;
-        unsigned long           pcic_io;
-        void __iomem            *pcic_config_space_addr;
-        void __iomem            *pcic_config_space_data;
-	struct resource		pcic_res_regs;
-	struct resource		pcic_res_io;
-	struct resource		pcic_res_cfg_addr;
-	struct resource		pcic_res_cfg_data;
-        struct linux_pbm_info   pbm;
-	struct pcic_ca2irq	*pcic_imap;
-	int			pcic_imdim;
-};
-
-extern int pcic_probe(void);
-/* Erm... MJ redefined pcibios_present() so that it does not work early. */
-extern int pcic_present(void);
-extern void sun4m_pci_init_IRQ(void);
-
-#endif
-
-/* Size of PCI I/O space which we relocate. */
-#define PCI_SPACE_SIZE                  0x1000000       /* 16 MB */
-
-/* PCIC Register Set. */
-#define PCI_DIAGNOSTIC_0                0x40    /* 32 bits */
-#define PCI_SIZE_0                      0x44    /* 32 bits */
-#define PCI_SIZE_1                      0x48    /* 32 bits */
-#define PCI_SIZE_2                      0x4c    /* 32 bits */
-#define PCI_SIZE_3                      0x50    /* 32 bits */
-#define PCI_SIZE_4                      0x54    /* 32 bits */
-#define PCI_SIZE_5                      0x58    /* 32 bits */
-#define PCI_PIO_CONTROL                 0x60    /* 8  bits */
-#define PCI_DVMA_CONTROL                0x62    /* 8  bits */
-#define  PCI_DVMA_CONTROL_INACTIVITY_REQ        (1<<0)
-#define  PCI_DVMA_CONTROL_IOTLB_ENABLE          (1<<0)
-#define  PCI_DVMA_CONTROL_IOTLB_DISABLE         0
-#define  PCI_DVMA_CONTROL_INACTIVITY_ACK        (1<<4)
-#define PCI_INTERRUPT_CONTROL           0x63    /* 8  bits */
-#define PCI_CPU_INTERRUPT_PENDING       0x64    /* 32 bits */
-#define PCI_DIAGNOSTIC_1                0x68    /* 16 bits */
-#define PCI_SOFTWARE_INT_CLEAR          0x6a    /* 16 bits */
-#define PCI_SOFTWARE_INT_SET            0x6e    /* 16 bits */
-#define PCI_SYS_INT_PENDING             0x70    /* 32 bits */
-#define  PCI_SYS_INT_PENDING_PIO		0x40000000
-#define  PCI_SYS_INT_PENDING_DMA		0x20000000
-#define  PCI_SYS_INT_PENDING_PCI		0x10000000
-#define  PCI_SYS_INT_PENDING_APSR		0x08000000
-#define PCI_SYS_INT_TARGET_MASK         0x74    /* 32 bits */
-#define PCI_SYS_INT_TARGET_MASK_CLEAR   0x78    /* 32 bits */
-#define PCI_SYS_INT_TARGET_MASK_SET     0x7c    /* 32 bits */
-#define PCI_SYS_INT_PENDING_CLEAR       0x83    /* 8  bits */
-#define  PCI_SYS_INT_PENDING_CLEAR_ALL		0x80
-#define  PCI_SYS_INT_PENDING_CLEAR_PIO		0x40
-#define  PCI_SYS_INT_PENDING_CLEAR_DMA		0x20
-#define  PCI_SYS_INT_PENDING_CLEAR_PCI		0x10
-#define PCI_IOTLB_CONTROL               0x84    /* 8  bits */
-#define PCI_INT_SELECT_LO               0x88    /* 16 bits */
-#define PCI_ARBITRATION_SELECT          0x8a    /* 16 bits */
-#define PCI_INT_SELECT_HI               0x8c    /* 16 bits */
-#define PCI_HW_INT_OUTPUT               0x8e    /* 16 bits */
-#define PCI_IOTLB_RAM_INPUT             0x90    /* 32 bits */
-#define PCI_IOTLB_CAM_INPUT             0x94    /* 32 bits */
-#define PCI_IOTLB_RAM_OUTPUT            0x98    /* 32 bits */
-#define PCI_IOTLB_CAM_OUTPUT            0x9c    /* 32 bits */
-#define PCI_SMBAR0                      0xa0    /* 8  bits */
-#define PCI_MSIZE0                      0xa1    /* 8  bits */
-#define PCI_PMBAR0                      0xa2    /* 8  bits */
-#define PCI_SMBAR1                      0xa4    /* 8  bits */
-#define PCI_MSIZE1                      0xa5    /* 8  bits */
-#define PCI_PMBAR1                      0xa6    /* 8  bits */
-#define PCI_SIBAR                       0xa8    /* 8  bits */
-#define   PCI_SIBAR_ADDRESS_MASK        0xf
-#define PCI_ISIZE                       0xa9    /* 8  bits */
-#define   PCI_ISIZE_16M                 0xf
-#define   PCI_ISIZE_32M                 0xe
-#define   PCI_ISIZE_64M                 0xc
-#define   PCI_ISIZE_128M                0x8
-#define   PCI_ISIZE_256M                0x0
-#define PCI_PIBAR                       0xaa    /* 8  bits */
-#define PCI_CPU_COUNTER_LIMIT_HI        0xac    /* 32 bits */
-#define PCI_CPU_COUNTER_LIMIT_LO        0xb0    /* 32 bits */
-#define PCI_CPU_COUNTER_LIMIT           0xb4    /* 32 bits */
-#define PCI_SYS_LIMIT                   0xb8    /* 32 bits */
-#define PCI_SYS_COUNTER                 0xbc    /* 32 bits */
-#define   PCI_SYS_COUNTER_OVERFLOW      (1<<31) /* Limit reached */
-#define PCI_SYS_LIMIT_PSEUDO            0xc0    /* 32 bits */
-#define PCI_USER_TIMER_CONTROL          0xc4    /* 8  bits */
-#define PCI_USER_TIMER_CONFIG           0xc5    /* 8  bits */
-#define PCI_COUNTER_IRQ                 0xc6    /* 8  bits */
-#define  PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq)  ((((sys_irq) & 0xf) << 4) | \
-                                                  ((cpu_irq) & 0xf))
-#define  PCI_COUNTER_IRQ_SYS(v)                 (((v) >> 4) & 0xf)
-#define  PCI_COUNTER_IRQ_CPU(v)                 ((v) & 0xf)
-#define PCI_PIO_ERROR_COMMAND           0xc7    /* 8  bits */
-#define PCI_PIO_ERROR_ADDRESS           0xc8    /* 32 bits */
-#define PCI_IOTLB_ERROR_ADDRESS         0xcc    /* 32 bits */
-#define PCI_SYS_STATUS                  0xd0    /* 8  bits */
-#define   PCI_SYS_STATUS_RESET_ENABLE           (1<<0)
-#define   PCI_SYS_STATUS_RESET                  (1<<1)
-#define   PCI_SYS_STATUS_WATCHDOG_RESET         (1<<4)
-#define   PCI_SYS_STATUS_PCI_RESET              (1<<5)
-#define   PCI_SYS_STATUS_PCI_RESET_ENABLE       (1<<6)
-#define   PCI_SYS_STATUS_PCI_SATTELITE_MODE     (1<<7)
-
-#endif /* !(__SPARC_PCIC_H) */
diff --git a/include/asm-sparc/percpu.h b/include/asm-sparc/percpu.h
deleted file mode 100644
index 06066a7aaec3..000000000000
--- a/include/asm-sparc/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_SPARC_PERCPU__
-#define __ARCH_SPARC_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SPARC_PERCPU__ */
diff --git a/include/asm-sparc/perfctr.h b/include/asm-sparc/perfctr.h
deleted file mode 100644
index 836873002b75..000000000000
--- a/include/asm-sparc/perfctr.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*----------------------------------------
-  PERFORMANCE INSTRUMENTATION  
-  Guillaume Thouvenin           08/10/98
-  David S. Miller               10/06/98
-  ---------------------------------------*/
-#ifndef PERF_COUNTER_API
-#define PERF_COUNTER_API
-
-/* sys_perfctr() interface.  First arg is operation code
- * from enumeration below.  The meaning of further arguments
- * are determined by the operation code.
- *
- * int sys_perfctr(int opcode, unsigned long arg0,
- *                 unsigned long arg1, unsigned long arg2)
- *
- * Pointers which are passed by the user are pointers to 64-bit
- * integers.
- *
- * Once enabled, performance counter state is retained until the
- * process either exits or performs an exec.  That is, performance
- * counters remain enabled for fork/clone children.
- */
-enum perfctr_opcode {
-	/* Enable UltraSparc performance counters, ARG0 is pointer
-	 * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
-	 * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
-	 * the initial PCR register value to use.
-	 */
-	PERFCTR_ON,
-
-	/* Disable UltraSparc performance counters.  The PCR is written
-	 * with zero and the user counter accumulator pointers and
-	 * working PCR register value are forgotten.
-	 */
-	PERFCTR_OFF,
-
-	/* Add current D0 and D1 PIC values into user pointers given
-	 * in PERFCTR_ON operation.  The PIC is cleared before returning.
-	 */
-	PERFCTR_READ,
-
-	/* Clear the PIC register. */
-	PERFCTR_CLRPIC,
-
-	/* Begin using a new PCR value, the pointer to which is passed
-	 * in ARG0.  The PIC is also cleared after the new PCR value is
-	 * written.
-	 */
-	PERFCTR_SETPCR,
-
-	/* Store in pointer given in ARG0 the current PCR register value
-	 * being used.
-	 */
-	PERFCTR_GETPCR
-};
-
-/* I don't want the kernel's namespace to be polluted with this
- * stuff when this file is included.  --DaveM
- */
-#ifndef __KERNEL__
-
-#define  PRIV 0x00000001
-#define  SYS  0x00000002
-#define  USR  0x00000004
-
-/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
-#define  CYCLE_CNT            0x00000000
-#define  INSTR_CNT            0x00000010
-#define  DISPATCH0_IC_MISS    0x00000020
-#define  DISPATCH0_STOREBUF   0x00000030
-#define  IC_REF               0x00000080
-#define  DC_RD                0x00000090
-#define  DC_WR                0x000000A0
-#define  LOAD_USE             0x000000B0
-#define  EC_REF               0x000000C0
-#define  EC_WRITE_HIT_RDO     0x000000D0
-#define  EC_SNOOP_INV         0x000000E0
-#define  EC_RD_HIT            0x000000F0
-
-/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
-#define  US3_CYCLE_CNT	      	0x00000000
-#define  US3_INSTR_CNT	      	0x00000010
-#define  US3_DISPATCH0_IC_MISS	0x00000020
-#define  US3_DISPATCH0_BR_TGT	0x00000030
-#define  US3_DISPATCH0_2ND_BR	0x00000040
-#define  US3_RSTALL_STOREQ	0x00000050
-#define  US3_RSTALL_IU_USE	0x00000060
-#define  US3_IC_REF		0x00000080
-#define  US3_DC_RD		0x00000090
-#define  US3_DC_WR		0x000000a0
-#define  US3_EC_REF		0x000000c0
-#define  US3_EC_WR_HIT_RTO	0x000000d0
-#define  US3_EC_SNOOP_INV	0x000000e0
-#define  US3_EC_RD_MISS		0x000000f0
-#define  US3_PC_PORT0_RD	0x00000100
-#define  US3_SI_SNOOP		0x00000110
-#define  US3_SI_CIQ_FLOW	0x00000120
-#define  US3_SI_OWNED		0x00000130
-#define  US3_SW_COUNT_0		0x00000140
-#define  US3_IU_BR_MISS_TAKEN	0x00000150
-#define  US3_IU_BR_COUNT_TAKEN	0x00000160
-#define  US3_DISP_RS_MISPRED	0x00000170
-#define  US3_FA_PIPE_COMPL	0x00000180
-#define  US3_MC_READS_0		0x00000200
-#define  US3_MC_READS_1		0x00000210
-#define  US3_MC_READS_2		0x00000220
-#define  US3_MC_READS_3		0x00000230
-#define  US3_MC_STALLS_0	0x00000240
-#define  US3_MC_STALLS_2	0x00000250
-
-/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
-#define  CYCLE_CNT_D1         0x00000000
-#define  INSTR_CNT_D1         0x00000800
-#define  DISPATCH0_IC_MISPRED 0x00001000
-#define  DISPATCH0_FP_USE     0x00001800
-#define  IC_HIT               0x00004000
-#define  DC_RD_HIT            0x00004800
-#define  DC_WR_HIT            0x00005000
-#define  LOAD_USE_RAW         0x00005800
-#define  EC_HIT               0x00006000
-#define  EC_WB                0x00006800
-#define  EC_SNOOP_CB          0x00007000
-#define  EC_IT_HIT            0x00007800
-
-/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
-#define  US3_CYCLE_CNT_D1	0x00000000
-#define  US3_INSTR_CNT_D1	0x00000800
-#define  US3_DISPATCH0_MISPRED	0x00001000
-#define  US3_IC_MISS_CANCELLED	0x00001800
-#define  US3_RE_ENDIAN_MISS	0x00002000
-#define  US3_RE_FPU_BYPASS	0x00002800
-#define  US3_RE_DC_MISS		0x00003000
-#define  US3_RE_EC_MISS		0x00003800
-#define  US3_IC_MISS		0x00004000
-#define  US3_DC_RD_MISS		0x00004800
-#define  US3_DC_WR_MISS		0x00005000
-#define  US3_RSTALL_FP_USE	0x00005800
-#define  US3_EC_MISSES		0x00006000
-#define  US3_EC_WB		0x00006800
-#define  US3_EC_SNOOP_CB	0x00007000
-#define  US3_EC_IC_MISS		0x00007800
-#define  US3_RE_PC_MISS		0x00008000
-#define  US3_ITLB_MISS		0x00008800
-#define  US3_DTLB_MISS		0x00009000
-#define  US3_WC_MISS		0x00009800
-#define  US3_WC_SNOOP_CB	0x0000a000
-#define  US3_WC_SCRUBBED	0x0000a800
-#define  US3_WC_WB_WO_READ	0x0000b000
-#define  US3_PC_SOFT_HIT	0x0000c000
-#define  US3_PC_SNOOP_INV	0x0000c800
-#define  US3_PC_HARD_HIT	0x0000d000
-#define  US3_PC_PORT1_RD	0x0000d800
-#define  US3_SW_COUNT_1		0x0000e000
-#define  US3_IU_STAT_BR_MIS_UNTAKEN	0x0000e800
-#define  US3_IU_STAT_BR_COUNT_UNTAKEN	0x0000f000
-#define  US3_PC_MS_MISSES	0x0000f800
-#define  US3_MC_WRITES_0	0x00010800
-#define  US3_MC_WRITES_1	0x00011000
-#define  US3_MC_WRITES_2	0x00011800
-#define  US3_MC_WRITES_3	0x00012000
-#define  US3_MC_STALLS_1	0x00012800
-#define  US3_MC_STALLS_3	0x00013000
-#define  US3_RE_RAW_MISS	0x00013800
-#define  US3_FM_PIPE_COMPLETION	0x00014000
-
-struct vcounter_struct {
-  unsigned long long vcnt0;
-  unsigned long long vcnt1;
-};
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(PERF_COUNTER_API) */
diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h
deleted file mode 100644
index 681582d26969..000000000000
--- a/include/asm-sparc/pgalloc.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef _SPARC_PGALLOC_H
-#define _SPARC_PGALLOC_H
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/page.h>
-#include <asm/btfixup.h>
-
-struct page;
-
-extern struct pgtable_cache_struct {
-	unsigned long *pgd_cache;
-	unsigned long *pte_cache;
-	unsigned long pgtable_cache_sz;
-	unsigned long pgd_cache_sz;
-} pgt_quicklists;
-#define pgd_quicklist           (pgt_quicklists.pgd_cache)
-#define pmd_quicklist           ((unsigned long *)0)
-#define pte_quicklist           (pgt_quicklists.pte_cache)
-#define pgtable_cache_size      (pgt_quicklists.pgtable_cache_sz)
-#define pgd_cache_size		(pgt_quicklists.pgd_cache_sz)
-
-extern void check_pgt_cache(void);
-BTFIXUPDEF_CALL(void,	 do_check_pgt_cache, int, int)
-#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high)
-
-BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void)
-#define get_pgd_fast()		BTFIXUP_CALL(get_pgd_fast)()
-
-BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *)
-#define free_pgd_fast(pgd)	BTFIXUP_CALL(free_pgd_fast)(pgd)
-
-#define pgd_free(mm, pgd)	free_pgd_fast(pgd)
-#define pgd_alloc(mm)	get_pgd_fast()
-
-BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *)
-#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp)
-#define pgd_populate(MM, PGD, PMD)      pgd_set(PGD, PMD)
-
-BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
-#define pmd_alloc_one(mm, address)	BTFIXUP_CALL(pmd_alloc_one)(mm, address)
-
-BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
-#define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
-
-#define pmd_free(mm, pmd)	free_pmd_fast(pmd)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
-
-BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
-#define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
-#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
-
-BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long)
-#define pte_alloc_one(mm, address)	BTFIXUP_CALL(pte_alloc_one)(mm, address)
-BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
-#define pte_alloc_one_kernel(mm, addr)	BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
-
-BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
-#define pte_free_kernel(mm, pte)	BTFIXUP_CALL(free_pte_fast)(pte)
-
-BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
-#define pte_free(mm, pte)	BTFIXUP_CALL(pte_free)(pte)
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
-
-#endif /* _SPARC_PGALLOC_H */
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
deleted file mode 100644
index 60512296b2ca..000000000000
--- a/include/asm-sparc/pgtable.h
+++ /dev/null
@@ -1,475 +0,0 @@
-#ifndef _SPARC_PGTABLE_H
-#define _SPARC_PGTABLE_H
-
-/*  asm-sparc/pgtable.h:  Defines and functions used to work
- *                        with Sparc page tables.
- *
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#include <asm-generic/4level-fixup.h>
-
-#include <linux/spinlock.h>
-#include <linux/swap.h>
-#include <asm/types.h>
-#ifdef CONFIG_SUN4
-#include <asm/pgtsun4.h>
-#else
-#include <asm/pgtsun4c.h>
-#endif
-#include <asm/pgtsrmmu.h>
-#include <asm/vac-ops.h>
-#include <asm/oplib.h>
-#include <asm/btfixup.h>
-#include <asm/system.h>
-
-#ifndef __ASSEMBLY__
-
-struct vm_area_struct;
-struct page;
-
-extern void load_mmu(void);
-extern unsigned long calc_highpages(void);
-
-BTFIXUPDEF_SIMM13(pgdir_shift)
-BTFIXUPDEF_SETHI(pgdir_size)
-BTFIXUPDEF_SETHI(pgdir_mask)
-
-BTFIXUPDEF_SIMM13(ptrs_per_pmd)
-BTFIXUPDEF_SIMM13(ptrs_per_pgd)
-BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
-
-#define pte_ERROR(e)   __builtin_trap()
-#define pmd_ERROR(e)   __builtin_trap()
-#define pgd_ERROR(e)   __builtin_trap()
-
-BTFIXUPDEF_INT(page_none)
-BTFIXUPDEF_INT(page_copy)
-BTFIXUPDEF_INT(page_readonly)
-BTFIXUPDEF_INT(page_kernel)
-
-#define PMD_SHIFT		SUN4C_PMD_SHIFT
-#define PMD_SIZE        	(1UL << PMD_SHIFT)
-#define PMD_MASK        	(~(PMD_SIZE-1))
-#define PMD_ALIGN(__addr) 	(((__addr) + ~PMD_MASK) & PMD_MASK)
-#define PGDIR_SHIFT     	BTFIXUP_SIMM13(pgdir_shift)
-#define PGDIR_SIZE      	BTFIXUP_SETHI(pgdir_size)
-#define PGDIR_MASK      	BTFIXUP_SETHI(pgdir_mask)
-#define PTRS_PER_PTE    	1024
-#define PTRS_PER_PMD    	BTFIXUP_SIMM13(ptrs_per_pmd)
-#define PTRS_PER_PGD    	BTFIXUP_SIMM13(ptrs_per_pgd)
-#define USER_PTRS_PER_PGD	BTFIXUP_SIMM13(user_ptrs_per_pgd)
-#define FIRST_USER_ADDRESS	0
-#define PTE_SIZE		(PTRS_PER_PTE*4)
-
-#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
-extern pgprot_t PAGE_SHARED;
-#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
-#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
-
-extern unsigned long page_kernel;
-
-#ifdef MODULE
-#define PAGE_KERNEL	page_kernel
-#else
-#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
-#endif
-
-/* Top-level page directory */
-extern pgd_t swapper_pg_dir[1024];
-
-extern void paging_init(void);
-
-/* Page table for 0-4MB for everybody, on the Sparc this
- * holds the same as on the i386.
- */
-extern pte_t pg0[1024];
-extern pte_t pg1[1024];
-extern pte_t pg2[1024];
-extern pte_t pg3[1024];
-
-extern unsigned long ptr_in_current_pgd;
-
-/* Here is a trick, since mmap.c need the initializer elements for
- * protection_map[] to be constant at compile time, I set the following
- * to all zeros.  I set it to the real values after I link in the
- * appropriate MMU page table routines at boot time.
- */
-#define __P000  __pgprot(0)
-#define __P001  __pgprot(0)
-#define __P010  __pgprot(0)
-#define __P011  __pgprot(0)
-#define __P100  __pgprot(0)
-#define __P101  __pgprot(0)
-#define __P110  __pgprot(0)
-#define __P111  __pgprot(0)
-
-#define __S000	__pgprot(0)
-#define __S001	__pgprot(0)
-#define __S010	__pgprot(0)
-#define __S011	__pgprot(0)
-#define __S100	__pgprot(0)
-#define __S101	__pgprot(0)
-#define __S110	__pgprot(0)
-#define __S111	__pgprot(0)
-
-extern int num_contexts;
-
-/* First physical page can be anywhere, the following is needed so that
- * va-->pa and vice versa conversions work properly without performance
- * hit for all __pa()/__va() operations.
- */
-extern unsigned long phys_base;
-extern unsigned long pfn_base;
-
-/*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern pte_t * __bad_pagetable(void);
-extern pte_t __bad_page(void);
-extern unsigned long empty_zero_page;
-
-#define BAD_PAGETABLE __bad_pagetable()
-#define BAD_PAGE __bad_page()
-#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
-
-/*
- */
-BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
-BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
-
-#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
-#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
-
-BTFIXUPDEF_SETHI(none_mask)
-BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
-BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
-
-static inline int pte_none(pte_t pte)
-{
-	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
-}
-
-#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
-#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
-
-BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
-BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
-BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
-
-static inline int pmd_none(pmd_t pmd)
-{
-	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
-}
-
-#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
-#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
-#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
-
-BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
-BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
-BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
-BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
-
-#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
-#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
-#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
-#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-BTFIXUPDEF_HALF(pte_writei)
-BTFIXUPDEF_HALF(pte_dirtyi)
-BTFIXUPDEF_HALF(pte_youngi)
-
-static int pte_write(pte_t pte) __attribute_const__;
-static inline int pte_write(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_writei);
-}
-
-static int pte_dirty(pte_t pte) __attribute_const__;
-static inline int pte_dirty(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
-}
-
-static int pte_young(pte_t pte) __attribute_const__;
-static inline int pte_young(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
-}
-
-/*
- * The following only work if pte_present() is not true.
- */
-BTFIXUPDEF_HALF(pte_filei)
-
-static int pte_file(pte_t pte) __attribute_const__;
-static inline int pte_file(pte_t pte)
-{
-	return pte_val(pte) & BTFIXUP_HALF(pte_filei);
-}
-
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
-/*
- */
-BTFIXUPDEF_HALF(pte_wrprotecti)
-BTFIXUPDEF_HALF(pte_mkcleani)
-BTFIXUPDEF_HALF(pte_mkoldi)
-
-static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
-}
-
-static pte_t pte_mkclean(pte_t pte) __attribute_const__;
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
-}
-
-static pte_t pte_mkold(pte_t pte) __attribute_const__;
-static inline pte_t pte_mkold(pte_t pte)
-{
-	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
-}
-
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
-BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
-
-#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
-#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
-#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
-
-#define pte_mkspecial(pte)    (pte)
-
-#define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
-
-BTFIXUPDEF_CALL(unsigned long,	 pte_pfn, pte_t)
-#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
-#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
-
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
-BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
-BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
-
-#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
-#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
-#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
-
-#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
-
-BTFIXUPDEF_INT(pte_modify_mask)
-
-static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
-		pgprot_val(newprot));
-}
-
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-
-/* to find an entry in a page-table-directory */
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* Find an entry in the second-level page table.. */
-BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
-#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
-
-/* Find an entry in the third-level page table.. */ 
-BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
-#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
-
-/*
- * This shortcut works on sun4m (and sun4d) because the nocache area is static,
- * and sun4c is guaranteed to have no highmem anyway.
- */
-#define pte_offset_map(d, a)		pte_offset_kernel(d,a)
-#define pte_offset_map_nested(d, a)	pte_offset_kernel(d,a)
-
-#define pte_unmap(pte)		do{}while(0)
-#define pte_unmap_nested(pte)	do{}while(0)
-
-/* Certain architectures need to do special things when pte's
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-
-BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
-
-#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-struct seq_file;
-BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
-
-#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
-
-/* Fault handler stuff... */
-#define FAULT_CODE_PROT     0x1
-#define FAULT_CODE_WRITE    0x2
-#define FAULT_CODE_USER     0x4
-
-BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
-
-#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
-
-BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
-    unsigned long, unsigned int)
-BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
-#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
-#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
-
-extern int invalid_segment;
-
-/* Encode and de-code a swap entry */
-BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
-BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
-BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
-
-#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
-#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
-#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
-
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
-
-/* file-offset-in-pte helpers */
-BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
-BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
-
-#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
-#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
-
-/*
- * This is made a constant because mm/fremap.c required a constant.
- * Note that layout of these bits is different between sun4c.c and srmmu.c.
- */
-#define PTE_FILE_MAX_BITS 24
-
-/*
- */
-struct ctx_list {
-	struct ctx_list *next;
-	struct ctx_list *prev;
-	unsigned int ctx_number;
-	struct mm_struct *ctx_mm;
-};
-
-extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
-extern struct ctx_list ctx_free;        /* Head of free list */
-extern struct ctx_list ctx_used;        /* Head of used contexts list */
-
-#define NO_CONTEXT     -1
-
-static inline void remove_from_ctx_list(struct ctx_list *entry)
-{
-	entry->next->prev = entry->prev;
-	entry->prev->next = entry->next;
-}
-
-static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
-{
-	entry->next = head;
-	(entry->prev = head->prev)->next = entry;
-	head->prev = entry;
-}
-#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
-#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
-
-static inline unsigned long
-__get_phys (unsigned long addr)
-{
-	switch (sparc_cpu_model){
-	case sun4:
-	case sun4c:
-		return sun4c_get_pte (addr) << PAGE_SHIFT;
-	case sun4m:
-	case sun4d:
-		return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
-	default:
-		return 0;
-	}
-}
-
-static inline int
-__get_iospace (unsigned long addr)
-{
-	switch (sparc_cpu_model){
-	case sun4:
-	case sun4c:
-		return -1; /* Don't check iospace on sun4c */
-	case sun4m:
-	case sun4d:
-		return (srmmu_get_pte (addr) >> 28);
-	default:
-		return -1;
-	}
-}
-
-extern unsigned long *sparc_valid_addr_bitmap;
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) \
-	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
-
-extern int io_remap_pfn_range(struct vm_area_struct *vma,
-			      unsigned long from, unsigned long pfn,
-			      unsigned long size, pgprot_t prot);
-
-/*
- * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
- * its high 4 bits.  These macros/functions put it there or get it from there.
- */
-#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
-#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
-#define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({									  \
-	int __changed = !pte_same(*(__ptep), __entry);			  \
-	if (__changed) {						  \
-		set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
-		flush_tlb_page(__vma, __address);			  \
-	}								  \
-	(sparc_cpu_model == sun4c) || __changed;			  \
-})
-
-#include <asm-generic/pgtable.h>
-
-#endif /* !(__ASSEMBLY__) */
-
-/* We provide our own get_unmapped_area to cope with VA holes for userland */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init()	do { } while (0)
-
-#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/include/asm-sparc/pgtsrmmu.h b/include/asm-sparc/pgtsrmmu.h
deleted file mode 100644
index 808555fc1d58..000000000000
--- a/include/asm-sparc/pgtsrmmu.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * pgtsrmmu.h:  SRMMU page table defines and code.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_PGTSRMMU_H
-#define _SPARC_PGTSRMMU_H
-
-#include <asm/page.h>
-
-#ifdef __ASSEMBLY__
-#include <asm/thread_info.h>	/* TI_UWINMASK for WINDOW_FLUSH */
-#endif
-
-/* Number of contexts is implementation-dependent; 64k is the most we support */
-#define SRMMU_MAX_CONTEXTS	65536
-
-/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
-#define SRMMU_REAL_PMD_SHIFT		18
-#define SRMMU_REAL_PMD_SIZE		(1UL << SRMMU_REAL_PMD_SHIFT)
-#define SRMMU_REAL_PMD_MASK		(~(SRMMU_REAL_PMD_SIZE-1))
-#define SRMMU_REAL_PMD_ALIGN(__addr)	(((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define SRMMU_PGDIR_SHIFT       24
-#define SRMMU_PGDIR_SIZE        (1UL << SRMMU_PGDIR_SHIFT)
-#define SRMMU_PGDIR_MASK        (~(SRMMU_PGDIR_SIZE-1))
-#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
-
-#define SRMMU_REAL_PTRS_PER_PTE	64
-#define SRMMU_REAL_PTRS_PER_PMD	64
-#define SRMMU_PTRS_PER_PGD	256
-
-#define SRMMU_REAL_PTE_TABLE_SIZE	(SRMMU_REAL_PTRS_PER_PTE*4)
-#define SRMMU_PMD_TABLE_SIZE		(SRMMU_REAL_PTRS_PER_PMD*4)
-#define SRMMU_PGD_TABLE_SIZE		(SRMMU_PTRS_PER_PGD*4)
-
-/*
- * To support pagetables in highmem, Linux introduces APIs which
- * return struct page* and generally manipulate page tables when
- * they are not mapped into kernel space. Our hardware page tables
- * are smaller than pages. We lump hardware tabes into big, page sized
- * software tables.
- *
- * PMD_SHIFT determines the size of the area a second-level page table entry
- * can map, and our pmd_t is 16 times larger than normal.  The values which
- * were once defined here are now generic for 4c and srmmu, so they're
- * found in pgtable.h.
- */
-#define SRMMU_PTRS_PER_PMD	4
-
-/* Definition of the values in the ET field of PTD's and PTE's */
-#define SRMMU_ET_MASK         0x3
-#define SRMMU_ET_INVALID      0x0
-#define SRMMU_ET_PTD          0x1
-#define SRMMU_ET_PTE          0x2
-#define SRMMU_ET_REPTE        0x3 /* AIEEE, SuperSparc II reverse endian page! */
-
-/* Physical page extraction from PTP's and PTE's. */
-#define SRMMU_CTX_PMASK    0xfffffff0
-#define SRMMU_PTD_PMASK    0xfffffff0
-#define SRMMU_PTE_PMASK    0xffffff00
-
-/* The pte non-page bits.  Some notes:
- * 1) cache, dirty, valid, and ref are frobbable
- *    for both supervisor and user pages.
- * 2) exec and write will only give the desired effect
- *    on user pages
- * 3) use priv and priv_readonly for changing the
- *    characteristics of supervisor ptes
- */
-#define SRMMU_CACHE        0x80
-#define SRMMU_DIRTY        0x40
-#define SRMMU_REF          0x20
-#define SRMMU_NOREAD       0x10
-#define SRMMU_EXEC         0x08
-#define SRMMU_WRITE        0x04
-#define SRMMU_VALID        0x02 /* SRMMU_ET_PTE */
-#define SRMMU_PRIV         0x1c
-#define SRMMU_PRIV_RDONLY  0x18
-
-#define SRMMU_FILE         0x40	/* Implemented in software */
-
-#define SRMMU_PTE_FILE_SHIFT     8	/* == 32-PTE_FILE_MAX_BITS */
-
-#define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
-
-/* SRMMU swap entry encoding
- *
- * We use 5 bits for the type and 19 for the offset.  This gives us
- * 32 swapfiles of 4GB each.  Encoding looks like:
- *
- * oooooooooooooooooootttttRRRRRRRR
- * fedcba9876543210fedcba9876543210
- *
- * The bottom 8 bits are reserved for protection and status bits, especially
- * FILE and PRESENT.
- */
-#define SRMMU_SWP_TYPE_MASK	0x1f
-#define SRMMU_SWP_TYPE_SHIFT	SRMMU_PTE_FILE_SHIFT
-#define SRMMU_SWP_OFF_MASK	0x7ffff
-#define SRMMU_SWP_OFF_SHIFT	(SRMMU_PTE_FILE_SHIFT + 5)
-
-/* Some day I will implement true fine grained access bits for
- * user pages because the SRMMU gives us the capabilities to
- * enforce all the protection levels that vma's can have.
- * XXX But for now...
- */
-#define SRMMU_PAGE_NONE    __pgprot(SRMMU_CACHE | \
-				    SRMMU_PRIV | SRMMU_REF)
-#define SRMMU_PAGE_SHARED  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
-				    SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
-#define SRMMU_PAGE_COPY    __pgprot(SRMMU_VALID | SRMMU_CACHE | \
-				    SRMMU_EXEC | SRMMU_REF)
-#define SRMMU_PAGE_RDONLY  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
-				    SRMMU_EXEC | SRMMU_REF)
-#define SRMMU_PAGE_KERNEL  __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
-				    SRMMU_DIRTY | SRMMU_REF)
-
-/* SRMMU Register addresses in ASI 0x4.  These are valid for all
- * current SRMMU implementations that exist.
- */
-#define SRMMU_CTRL_REG           0x00000000
-#define SRMMU_CTXTBL_PTR         0x00000100
-#define SRMMU_CTX_REG            0x00000200
-#define SRMMU_FAULT_STATUS       0x00000300
-#define SRMMU_FAULT_ADDR         0x00000400
-
-#define WINDOW_FLUSH(tmp1, tmp2)					\
-	mov	0, tmp1;						\
-98:	ld	[%g6 + TI_UWINMASK], tmp2;				\
-	orcc	%g0, tmp2, %g0;						\
-	add	tmp1, 1, tmp1;						\
-	bne	98b;							\
-	 save	%sp, -64, %sp;						\
-99:	subcc	tmp1, 1, tmp1;						\
-	bne	99b;							\
-	 restore %g0, %g0, %g0;
-
-#ifndef __ASSEMBLY__
-
-/* This makes sense. Honest it does - Anton */
-/* XXX Yes but it's ugly as sin.  FIXME. -KMW */
-extern void *srmmu_nocache_pool;
-#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
-#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
-#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
-
-/* Accessing the MMU control register. */
-static inline unsigned int srmmu_get_mmureg(void)
-{
-        unsigned int retval;
-	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
-			     "=r" (retval) :
-			     "i" (ASI_M_MMUREGS));
-	return retval;
-}
-
-static inline void srmmu_set_mmureg(unsigned long regval)
-{
-	__asm__ __volatile__("sta %0, [%%g0] %1\n\t" : :
-			     "r" (regval), "i" (ASI_M_MMUREGS) : "memory");
-
-}
-
-static inline void srmmu_set_ctable_ptr(unsigned long paddr)
-{
-	paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
-	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
-			     "r" (paddr), "r" (SRMMU_CTXTBL_PTR),
-			     "i" (ASI_M_MMUREGS) :
-			     "memory");
-}
-
-static inline unsigned long srmmu_get_ctable_ptr(void)
-{
-	unsigned int retval;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (retval) :
-			     "r" (SRMMU_CTXTBL_PTR),
-			     "i" (ASI_M_MMUREGS));
-	return (retval & SRMMU_CTX_PMASK) << 4;
-}
-
-static inline void srmmu_set_context(int context)
-{
-	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
-			     "r" (context), "r" (SRMMU_CTX_REG),
-			     "i" (ASI_M_MMUREGS) : "memory");
-}
-
-static inline int srmmu_get_context(void)
-{
-	register int retval;
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (retval) :
-			     "r" (SRMMU_CTX_REG),
-			     "i" (ASI_M_MMUREGS));
-	return retval;
-}
-
-static inline unsigned int srmmu_get_fstatus(void)
-{
-	unsigned int retval;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (retval) :
-			     "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS));
-	return retval;
-}
-
-static inline unsigned int srmmu_get_faddr(void)
-{
-	unsigned int retval;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (retval) :
-			     "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS));
-	return retval;
-}
-
-/* This is guaranteed on all SRMMU's. */
-static inline void srmmu_flush_whole_tlb(void)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
-			     "r" (0x400),        /* Flush entire TLB!! */
-			     "i" (ASI_M_FLUSH_PROBE) : "memory");
-
-}
-
-/* These flush types are not available on all chips... */
-static inline void srmmu_flush_tlb_ctx(void)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
-			     "r" (0x300),        /* Flush TLB ctx.. */
-			     "i" (ASI_M_FLUSH_PROBE) : "memory");
-
-}
-
-static inline void srmmu_flush_tlb_region(unsigned long addr)
-{
-	addr &= SRMMU_PGDIR_MASK;
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
-			     "r" (addr | 0x200), /* Flush TLB region.. */
-			     "i" (ASI_M_FLUSH_PROBE) : "memory");
-
-}
-
-
-static inline void srmmu_flush_tlb_segment(unsigned long addr)
-{
-	addr &= SRMMU_REAL_PMD_MASK;
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
-			     "r" (addr | 0x100), /* Flush TLB segment.. */
-			     "i" (ASI_M_FLUSH_PROBE) : "memory");
-
-}
-
-static inline void srmmu_flush_tlb_page(unsigned long page)
-{
-	page &= PAGE_MASK;
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
-			     "r" (page),        /* Flush TLB page.. */
-			     "i" (ASI_M_FLUSH_PROBE) : "memory");
-
-}
-
-static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
-{
-	unsigned long retval;
-
-	vaddr &= PAGE_MASK;
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (retval) :
-			     "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
-
-	return retval;
-}
-
-static inline int
-srmmu_get_pte (unsigned long addr)
-{
-	register unsigned long entry;
-        
-	__asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
-				"=r" (entry):
-				"r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
-	return entry;
-}
-
-extern unsigned long (*srmmu_read_physical)(unsigned long paddr);
-extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word);
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_PGTSRMMU_H) */
diff --git a/include/asm-sparc/pgtsun4.h b/include/asm-sparc/pgtsun4.h
deleted file mode 100644
index 5a0d661fb82e..000000000000
--- a/include/asm-sparc/pgtsun4.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * pgtsun4.h:  Sun4 specific pgtable.h defines and code.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#ifndef _SPARC_PGTSUN4C_H
-#define _SPARC_PGTSUN4C_H
-
-#include <asm/contregs.h>
-
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#define SUN4C_PMD_SHIFT       23
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define SUN4C_PGDIR_SHIFT       23
-#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
-#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
-#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
-
-/* To represent how the sun4c mmu really lays things out. */
-#define SUN4C_REAL_PGDIR_SHIFT       18
-#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
-#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
-#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
-
-/* 19 bit PFN on sun4 */
-#define SUN4C_PFN_MASK 0x7ffff
- 
-/* Don't increase these unless the structures in sun4c.c are fixed */
-#define SUN4C_MAX_SEGMAPS 256
-#define SUN4C_MAX_CONTEXTS 16
-
-/*
- * To be efficient, and not have to worry about allocating such
- * a huge pgd, we make the kernel sun4c tables each hold 1024
- * entries and the pgd similarly just like the i386 tables.
- */
-#define SUN4C_PTRS_PER_PTE    1024
-#define SUN4C_PTRS_PER_PMD    1
-#define SUN4C_PTRS_PER_PGD    1024
-
-/*
- * Sparc SUN4C pte fields.
- */
-#define _SUN4C_PAGE_VALID        0x80000000
-#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
-#define _SUN4C_PAGE_DIRTY        0x40000000
-#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
-#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
-#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
-#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
-#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
-#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
-#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
-#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
-#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
-#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
-
-#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
-				 _SUN4C_PAGE_ACCESSED)
-#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
-				 _SUN4C_PAGE_MODIFIED)
-
-#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
-
-#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
-#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
-					 _SUN4C_PAGE_WRITE)
-#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
-#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
-#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
-					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
-
-/* SUN4C swap entry encoding
- *
- * We use 5 bits for the type and 19 for the offset.  This gives us
- * 32 swapfiles of 4GB each.  Encoding looks like:
- *
- * RRRRRRRRooooooooooooooooooottttt
- * fedcba9876543210fedcba9876543210
- *
- * The top 8 bits are reserved for protection and status bits, especially
- * FILE and PRESENT.
- */
-#define SUN4C_SWP_TYPE_MASK	0x1f
-#define SUN4C_SWP_OFF_MASK	0x7ffff
-#define SUN4C_SWP_OFF_SHIFT	5
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long sun4c_get_synchronous_error(void)
-{
-	unsigned long sync_err;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (sync_err) :
-			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
-	return sync_err;
-}
-
-static inline unsigned long sun4c_get_synchronous_address(void)
-{
-	unsigned long sync_addr;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (sync_addr) :
-			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
-	return sync_addr;
-}
-
-/* SUN4 pte, segmap, and context manipulation */
-static inline unsigned long sun4c_get_segmap(unsigned long addr)
-{
-  register unsigned long entry;
-
-  __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : 
-		       "=r" (entry) :
-		       "r" (addr), "i" (ASI_SEGMAP));
-  return entry;
-}
-
-static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
-{
-  __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : :
-		       "r" (addr), "r" (entry),
-		       "i" (ASI_SEGMAP)
-		       : "memory");
-}
-
-static inline unsigned long sun4c_get_pte(unsigned long addr)
-{
-  register unsigned long entry;
-
-  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
-		       "=r" (entry) :
-		       "r" (addr), "i" (ASI_PTE));
-  return entry;
-}
-
-static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
-{
-  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
-		       "r" (addr), 
-		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
-		       : "memory");
-}
-
-static inline int sun4c_get_context(void)
-{
-  register int ctx;
-
-  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
-		       "=r" (ctx) :
-		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
-
-  return ctx;
-}
-
-static inline int sun4c_set_context(int ctx)
-{
-  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
-		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
-		       : "memory");
-
-  return ctx;
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_PGTSUN4_H) */
diff --git a/include/asm-sparc/pgtsun4c.h b/include/asm-sparc/pgtsun4c.h
deleted file mode 100644
index aeb25e912179..000000000000
--- a/include/asm-sparc/pgtsun4c.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * pgtsun4c.h:  Sun4c specific pgtable.h defines and code.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_PGTSUN4C_H
-#define _SPARC_PGTSUN4C_H
-
-#include <asm/contregs.h>
-
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
-#define SUN4C_PMD_SHIFT       22
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define SUN4C_PGDIR_SHIFT       22
-#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
-#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
-#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
-
-/* To represent how the sun4c mmu really lays things out. */
-#define SUN4C_REAL_PGDIR_SHIFT       18
-#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
-#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
-#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
-
-/* 16 bit PFN on sun4c */
-#define SUN4C_PFN_MASK 0xffff
-
-/* Don't increase these unless the structures in sun4c.c are fixed */
-#define SUN4C_MAX_SEGMAPS 256
-#define SUN4C_MAX_CONTEXTS 16
-
-/*
- * To be efficient, and not have to worry about allocating such
- * a huge pgd, we make the kernel sun4c tables each hold 1024
- * entries and the pgd similarly just like the i386 tables.
- */
-#define SUN4C_PTRS_PER_PTE    1024
-#define SUN4C_PTRS_PER_PMD    1
-#define SUN4C_PTRS_PER_PGD    1024
-
-/*
- * Sparc SUN4C pte fields.
- */
-#define _SUN4C_PAGE_VALID        0x80000000
-#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
-#define _SUN4C_PAGE_DIRTY        0x40000000
-#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
-#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
-#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
-#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
-#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
-#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
-#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
-#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
-#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
-#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
-
-#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
-				 _SUN4C_PAGE_ACCESSED)
-#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
-				 _SUN4C_PAGE_MODIFIED)
-
-#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
-
-#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
-#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
-					 _SUN4C_PAGE_WRITE)
-#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
-#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
-#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
-					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
-
-/* SUN4C swap entry encoding
- *
- * We use 5 bits for the type and 19 for the offset.  This gives us
- * 32 swapfiles of 4GB each.  Encoding looks like:
- *
- * RRRRRRRRooooooooooooooooooottttt
- * fedcba9876543210fedcba9876543210
- *
- * The top 8 bits are reserved for protection and status bits, especially
- * FILE and PRESENT.
- */
-#define SUN4C_SWP_TYPE_MASK	0x1f
-#define SUN4C_SWP_OFF_MASK	0x7ffff
-#define SUN4C_SWP_OFF_SHIFT	5
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long sun4c_get_synchronous_error(void)
-{
-	unsigned long sync_err;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (sync_err) :
-			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
-	return sync_err;
-}
-
-static inline unsigned long sun4c_get_synchronous_address(void)
-{
-	unsigned long sync_addr;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
-			     "=r" (sync_addr) :
-			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
-	return sync_addr;
-}
-
-/* SUN4C pte, segmap, and context manipulation */
-static inline unsigned long sun4c_get_segmap(unsigned long addr)
-{
-  register unsigned long entry;
-
-  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : 
-		       "=r" (entry) :
-		       "r" (addr), "i" (ASI_SEGMAP));
-
-  return entry;
-}
-
-static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
-{
-
-  __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : :
-		       "r" (addr), "r" (entry),
-		       "i" (ASI_SEGMAP)
-		       : "memory");
-}
-
-static inline unsigned long sun4c_get_pte(unsigned long addr)
-{
-  register unsigned long entry;
-
-  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
-		       "=r" (entry) :
-		       "r" (addr), "i" (ASI_PTE));
-  return entry;
-}
-
-static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
-{
-  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
-		       "r" (addr), 
-		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
-		       : "memory");
-}
-
-static inline int sun4c_get_context(void)
-{
-  register int ctx;
-
-  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
-		       "=r" (ctx) :
-		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
-
-  return ctx;
-}
-
-static inline int sun4c_set_context(int ctx)
-{
-  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
-		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
-		       : "memory");
-
-  return ctx;
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_PGTSUN4C_H) */
diff --git a/include/asm-sparc/poll.h b/include/asm-sparc/poll.h
deleted file mode 100644
index 091d3ad2e830..000000000000
--- a/include/asm-sparc/poll.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __SPARC_POLL_H
-#define __SPARC_POLL_H
-
-#define POLLWRNORM	POLLOUT
-#define POLLWRBAND	256
-#define POLLMSG		512
-#define POLLREMOVE	1024
-#define POLLRDHUP       2048
-
-#include <asm-generic/poll.h>
-
-#endif
diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h
deleted file mode 100644
index dcc07eb5e181..000000000000
--- a/include/asm-sparc/posix_types.h
+++ /dev/null
@@ -1,118 +0,0 @@
-#ifndef __ARCH_SPARC_POSIX_TYPES_H
-#define __ARCH_SPARC_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned int           __kernel_size_t;
-typedef int                    __kernel_ssize_t;
-typedef long int               __kernel_ptrdiff_t;
-typedef long                   __kernel_time_t;
-typedef long		       __kernel_suseconds_t;
-typedef long                   __kernel_clock_t;
-typedef int                    __kernel_pid_t;
-typedef unsigned short         __kernel_ipc_pid_t;
-typedef unsigned short         __kernel_uid_t;
-typedef unsigned short         __kernel_gid_t;
-typedef unsigned long          __kernel_ino_t;
-typedef unsigned short         __kernel_mode_t;
-typedef unsigned short         __kernel_umode_t;
-typedef short                  __kernel_nlink_t;
-typedef long                   __kernel_daddr_t;
-typedef long                   __kernel_off_t;
-typedef char *                 __kernel_caddr_t;
-typedef unsigned short	       __kernel_uid16_t;
-typedef unsigned short	       __kernel_gid16_t;
-typedef unsigned int	       __kernel_uid32_t;
-typedef unsigned int	       __kernel_gid32_t;
-typedef unsigned short	       __kernel_old_uid_t;
-typedef unsigned short	       __kernel_old_gid_t;
-typedef unsigned short	       __kernel_old_dev_t;
-typedef int                    __kernel_clockid_t;
-typedef int                    __kernel_timer_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef __FD_SET
-static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
-{ 
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant cases (8 or 32 longs,
- * for 256 and 1024-bit fd_sets respectively)
- */
-#undef __FD_ZERO
-static inline void __FD_ZERO(__kernel_fd_set *p)
-{
-	unsigned long *tmp = p->fds_bits;
-	int i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-			case 32:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
-			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
-			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
-			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
-			  return;
-			case 16:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			  return;
-			case 8:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			  return;
-			case 4:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  return;
-		}
-	}
-	i = __FDSET_LONGS;
-	while (i) {
-		i--;
-		*tmp = 0;
-		tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h
deleted file mode 100644
index 8898efbbbe07..000000000000
--- a/include/asm-sparc/processor.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* include/asm-sparc/processor.h
- *
- * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __ASM_SPARC_PROCESSOR_H
-#define __ASM_SPARC_PROCESSOR_H
-
-/*
- * Sparc32 implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
-
-#include <asm/psr.h>
-#include <asm/ptrace.h>
-#include <asm/head.h>
-#include <asm/signal.h>
-#include <asm/btfixup.h>
-#include <asm/page.h>
-
-/*
- * The sparc has no problems with write protection
- */
-#define wp_works_ok 1
-#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
-
-/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too... 
- * That one page is used to protect kernel from intruders, so that
- * we can make our access_ok test faster
- */
-#define TASK_SIZE	PAGE_OFFSET
-#ifdef __KERNEL__
-#define STACK_TOP	(PAGE_OFFSET - PAGE_SIZE)
-#define STACK_TOP_MAX	STACK_TOP
-#endif /* __KERNEL__ */
-
-struct task_struct;
-
-#ifdef __KERNEL__
-struct fpq {
-	unsigned long *insn_addr;
-	unsigned long insn;
-};
-#endif
-
-typedef struct {
-	int seg;
-} mm_segment_t;
-
-/* The Sparc processor specific thread struct. */
-struct thread_struct {
-	struct pt_regs *kregs;
-	unsigned int _pad1;
-
-	/* Special child fork kpsr/kwim values. */
-	unsigned long fork_kpsr __attribute__ ((aligned (8)));
-	unsigned long fork_kwim;
-
-	/* Floating point regs */
-	unsigned long   float_regs[32] __attribute__ ((aligned (8)));
-	unsigned long   fsr;
-	unsigned long   fpqdepth;
-	struct fpq	fpqueue[16];
-	unsigned long flags;
-	mm_segment_t current_ds;
-};
-
-#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
-#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
-
-#define INIT_THREAD  { \
-	.flags = SPARC_FLAG_KTHREAD, \
-	.current_ds = KERNEL_DS, \
-}
-
-/* Return saved PC of a blocked thread. */
-extern unsigned long thread_saved_pc(struct task_struct *t);
-
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
-				    unsigned long sp)
-{
-	register unsigned long zero asm("g1");
-
-	regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
-	regs->pc = ((pc & (~3)) - 4);
-	regs->npc = regs->pc + 4;
-	regs->y = 0;
-	zero = 0;
-	__asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x08]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x10]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x18]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x20]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x28]\n\t"
-			     "std\t%%g0, [%0 + %3 + 0x30]\n\t"
-			     "st\t%1, [%0 + %3 + 0x38]\n\t"
-			     "st\t%%g0, [%0 + %3 + 0x3c]"
-			     : /* no outputs */
-			     : "r" (regs),
-			       "r" (sp - sizeof(struct reg_window)),
-			       "r" (zero),
-			       "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
-			     : "memory");
-}
-
-/* Free all resources held by a thread. */
-#define release_thread(tsk)		do { } while(0)
-extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern unsigned long get_wchan(struct task_struct *);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
-#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
-
-#ifdef __KERNEL__
-
-extern struct task_struct *last_task_used_math;
-
-#define cpu_relax()	barrier()
-
-#endif
-
-#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/include/asm-sparc/prom.h b/include/asm-sparc/prom.h
deleted file mode 100644
index fd55522481cd..000000000000
--- a/include/asm-sparc/prom.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef _SPARC_PROM_H
-#define _SPARC_PROM_H
-#ifdef __KERNEL__
-
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
- * Updates for SPARC by David S. Miller
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <asm/atomic.h>
-
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	2
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
-
-#define of_compat_cmp(s1, s2, l)	strncmp((s1), (s2), (l))
-#define of_prop_cmp(s1, s2)		strcasecmp((s1), (s2))
-#define of_node_cmp(s1, s2)		strcmp((s1), (s2))
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-	unsigned long _flags;
-	unsigned int unique_id;
-};
-
-struct of_irq_controller;
-struct device_node {
-	const char	*name;
-	const char	*type;
-	phandle	node;
-	char	*path_component_name;
-	char	*full_name;
-
-	struct	property *properties;
-	struct  property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next;	/* next device of same type */
-	struct	device_node *allnext;	/* next in list of all nodes */
-	struct  proc_dir_entry *pde;	/* this node's proc directory */
-	struct  kref kref;
-	unsigned long _flags;
-	void	*data;
-	unsigned int unique_id;
-
-	struct of_irq_controller *irq_trans;
-};
-
-struct of_irq_controller {
-	unsigned int	(*irq_build)(struct device_node *, unsigned int, void *);
-	void		*data;
-};
-
-#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
-#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
-
-extern struct device_node *of_find_node_by_cpuid(int cpuid);
-extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
-extern int of_getintprop_default(struct device_node *np,
-				 const char *name,
-				 int def);
-extern int of_find_in_proplist(const char *list, const char *match, int len);
-#ifdef CONFIG_NUMA
-extern int of_node_to_nid(struct device_node *dp);
-#else
-#define of_node_to_nid(dp)	(-1)
-#endif
-
-extern void prom_build_devicetree(void);
-
-/* Dummy ref counting routines - to be implemented later */
-static inline struct device_node *of_node_get(struct device_node *node)
-{
-	return node;
-}
-static inline void of_node_put(struct device_node *node)
-{
-}
-
-/*
- * NB:  This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
-extern struct device_node *of_console_device;
-extern char *of_console_path;
-extern char *of_console_options;
-
-#endif /* __KERNEL__ */
-#endif /* _SPARC_PROM_H */
diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h
deleted file mode 100644
index b8c0e5f0a66b..000000000000
--- a/include/asm-sparc/psr.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * psr.h: This file holds the macros for masking off various parts of
- *        the processor status register on the Sparc. This is valid
- *        for Version 8. On the V9 this is renamed to the PSTATE
- *        register and its members are accessed as fields like
- *        PSTATE.PRIV for the current CPU privilege level.
- *
- * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __LINUX_SPARC_PSR_H
-#define __LINUX_SPARC_PSR_H
-
-/* The Sparc PSR fields are laid out as the following:
- *
- *  ------------------------------------------------------------------------
- *  | impl  | vers  | icc   | resv  | EC | EF | PIL  | S | PS | ET |  CWP  |
- *  | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6  | 5  |  4-0  |
- *  ------------------------------------------------------------------------
- */
-#define PSR_CWP     0x0000001f         /* current window pointer     */
-#define PSR_ET      0x00000020         /* enable traps field         */
-#define PSR_PS      0x00000040         /* previous privilege level   */
-#define PSR_S       0x00000080         /* current privilege level    */
-#define PSR_PIL     0x00000f00         /* processor interrupt level  */
-#define PSR_EF      0x00001000         /* enable floating point      */
-#define PSR_EC      0x00002000         /* enable co-processor        */
-#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
-#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
-#define PSR_ICC     0x00f00000         /* integer condition codes    */
-#define PSR_C       0x00100000         /* carry bit                  */
-#define PSR_V       0x00200000         /* overflow bit               */
-#define PSR_Z       0x00400000         /* zero bit                   */
-#define PSR_N       0x00800000         /* negative bit               */
-#define PSR_VERS    0x0f000000         /* cpu-version field          */
-#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-/* Get the %psr register. */
-static inline unsigned int get_psr(void)
-{
-	unsigned int psr;
-	__asm__ __volatile__(
-		"rd	%%psr, %0\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-	: "=r" (psr)
-	: /* no inputs */
-	: "memory");
-
-	return psr;
-}
-
-static inline void put_psr(unsigned int new_psr)
-{
-	__asm__ __volatile__(
-		"wr	%0, 0x0, %%psr\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-	: /* no outputs */
-	: "r" (new_psr)
-	: "memory", "cc");
-}
-
-/* Get the %fsr register.  Be careful, make sure the floating point
- * enable bit is set in the %psr when you execute this or you will
- * incur a trap.
- */
-
-extern unsigned int fsr_storage;
-
-static inline unsigned int get_fsr(void)
-{
-	unsigned int fsr = 0;
-
-	__asm__ __volatile__(
-		"st	%%fsr, %1\n\t"
-		"ld	%1, %0\n\t"
-	: "=r" (fsr)
-	: "m" (fsr_storage));
-
-	return fsr;
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* (__KERNEL__) */
-
-#endif /* !(__LINUX_SPARC_PSR_H) */
diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h
deleted file mode 100644
index 11f3bc2bb3f5..000000000000
--- a/include/asm-sparc/ptrace.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef _SPARC_PTRACE_H
-#define _SPARC_PTRACE_H
-
-#include <asm/psr.h>
-
-/* This struct defines the way the registers are stored on the 
- * stack during a system call and basically all traps.
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-struct pt_regs {
-	unsigned long psr;
-	unsigned long pc;
-	unsigned long npc;
-	unsigned long y;
-	unsigned long u_regs[16]; /* globals and ins */
-};
-
-#define UREG_G0        0
-#define UREG_G1        1
-#define UREG_G2        2
-#define UREG_G3        3
-#define UREG_G4        4
-#define UREG_G5        5
-#define UREG_G6        6
-#define UREG_G7        7
-#define UREG_I0        8
-#define UREG_I1        9
-#define UREG_I2        10
-#define UREG_I3        11
-#define UREG_I4        12
-#define UREG_I5        13
-#define UREG_I6        14
-#define UREG_I7        15
-#define UREG_WIM       UREG_G0
-#define UREG_FADDR     UREG_G0
-#define UREG_FP        UREG_I6
-#define UREG_RETPC     UREG_I7
-
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-	return (regs->psr & PSR_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-	return (regs->psr &= ~PSR_SYSCALL);
-}
-
-/* A register window */
-struct reg_window {
-	unsigned long locals[8];
-	unsigned long ins[8];
-};
-
-/* A Sparc stack frame */
-struct sparc_stackf {
-	unsigned long locals[8];
-        unsigned long ins[6];
-	struct sparc_stackf *fp;
-	unsigned long callers_pc;
-	char *structptr;
-	unsigned long xargs[6];
-	unsigned long xxargs[1];
-};	
-
-#define TRACEREG_SZ   sizeof(struct pt_regs)
-#define STACKFRAME_SZ sizeof(struct sparc_stackf)
-
-#ifdef __KERNEL__
-
-#define user_mode(regs) (!((regs)->psr & PSR_PS))
-#define instruction_pointer(regs) ((regs)->pc)
-unsigned long profile_pc(struct pt_regs *);
-extern void show_regs(struct pt_regs *);
-#endif
-
-#else /* __ASSEMBLY__ */
-/* For assembly code. */
-#define TRACEREG_SZ       0x50
-#define STACKFRAME_SZ     0x60
-#endif
-
-/*
- * The asm-offsets.h is a generated file, so we cannot include it.
- * It may be OK for glibc headers, but it's utterly pointless for C code.
- * The assembly code using those offsets has to include it explicitly.
- */
-/* #include <asm/asm-offsets.h> */
-
-/* These are for pt_regs. */
-#define PT_PSR    0x0
-#define PT_PC     0x4
-#define PT_NPC    0x8
-#define PT_Y      0xc
-#define PT_G0     0x10
-#define PT_WIM    PT_G0
-#define PT_G1     0x14
-#define PT_G2     0x18
-#define PT_G3     0x1c
-#define PT_G4     0x20
-#define PT_G5     0x24
-#define PT_G6     0x28
-#define PT_G7     0x2c
-#define PT_I0     0x30
-#define PT_I1     0x34
-#define PT_I2     0x38
-#define PT_I3     0x3c
-#define PT_I4     0x40
-#define PT_I5     0x44
-#define PT_I6     0x48
-#define PT_FP     PT_I6
-#define PT_I7     0x4c
-
-/* Reg_window offsets */
-#define RW_L0     0x00
-#define RW_L1     0x04
-#define RW_L2     0x08
-#define RW_L3     0x0c
-#define RW_L4     0x10
-#define RW_L5     0x14
-#define RW_L6     0x18
-#define RW_L7     0x1c
-#define RW_I0     0x20
-#define RW_I1     0x24
-#define RW_I2     0x28
-#define RW_I3     0x2c
-#define RW_I4     0x30
-#define RW_I5     0x34
-#define RW_I6     0x38
-#define RW_I7     0x3c
-
-/* Stack_frame offsets */
-#define SF_L0     0x00
-#define SF_L1     0x04
-#define SF_L2     0x08
-#define SF_L3     0x0c
-#define SF_L4     0x10
-#define SF_L5     0x14
-#define SF_L6     0x18
-#define SF_L7     0x1c
-#define SF_I0     0x20
-#define SF_I1     0x24
-#define SF_I2     0x28
-#define SF_I3     0x2c
-#define SF_I4     0x30
-#define SF_I5     0x34
-#define SF_FP     0x38
-#define SF_PC     0x3c
-#define SF_RETP   0x40
-#define SF_XARG0  0x44
-#define SF_XARG1  0x48
-#define SF_XARG2  0x4c
-#define SF_XARG3  0x50
-#define SF_XARG4  0x54
-#define SF_XARG5  0x58
-#define SF_XXARG  0x5c
-
-/* Stuff for the ptrace system call */
-#define PTRACE_SPARC_DETACH       11
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_READDATA           16
-#define PTRACE_WRITEDATA          17
-#define PTRACE_READTEXT           18
-#define PTRACE_WRITETEXT          19
-#define PTRACE_GETFPAREGS         20
-#define PTRACE_SETFPAREGS         21
-
-#endif /* !(_SPARC_PTRACE_H) */
diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h
deleted file mode 100644
index ea0a7e590bb3..000000000000
--- a/include/asm-sparc/reg.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * linux/include/asm-sparc/reg.h
- * Layout of the registers as expected by gdb on the Sparc
- * we should replace the user.h definitions with those in
- * this file, we don't even use the other 
- * -miguel
- *
- * The names of the structures, constants and aliases in this file
- * have the same names as the sunos ones, some programs rely on these
- * names (gdb for example).
- *
- */
-
-#ifndef __SPARC_REG_H
-#define __SPARC_REG_H
-
-struct regs {
-	int     r_psr;
-#define r_ps r_psr
-        int     r_pc; 
-        int     r_npc;
-        int     r_y;  
-        int     r_g1; 
-        int     r_g2;
-        int     r_g3;
-        int     r_g4;
-        int     r_g5;
-        int     r_g6;
-        int     r_g7;
-        int     r_o0;
-        int     r_o1;
-        int     r_o2;
-        int     r_o3;
-        int     r_o4;
-        int     r_o5;
-        int     r_o6;
-        int     r_o7;
-};
-
-struct fpq {
-        unsigned long *addr;
-        unsigned long instr;
-};
-
-struct  fq {
-        union {
-                double  whole;
-                struct  fpq fpq;
-        } FQu;
-};
-
-#define FPU_REGS_TYPE unsigned int
-#define FPU_FSR_TYPE unsigned
-
-struct fp_status {
-        union {
-                FPU_REGS_TYPE Fpu_regs[32];
-                double  Fpu_dregs[16];
-        } fpu_fr;
-        FPU_FSR_TYPE Fpu_fsr;
-        unsigned Fpu_flags;
-        unsigned Fpu_extra;
-        unsigned Fpu_qcnt;
-        struct fq Fpu_q[16];
-};
-
-#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
-#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
-#define fpu_fsr   f_fpstatus.Fpu_fsr
-#define fpu_flags f_fpstatus.Fpu_flags
-#define fpu_extra f_fpstatus.Fpu_extra
-#define fpu_q     f_fpstatus.Fpu_q
-#define fpu_qcnt  f_fpstatus.Fpu_qcnt
-
-struct fpu {
-        struct fp_status f_fpstatus;
-};
-
-#endif /* __SPARC_REG_H */
diff --git a/include/asm-sparc/resource.h b/include/asm-sparc/resource.h
deleted file mode 100644
index 985948a41299..000000000000
--- a/include/asm-sparc/resource.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * resource.h: Resource definitions.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_RESOURCE_H
-#define _SPARC_RESOURCE_H
-
-/*
- * These two resource limit IDs have a Sparc/Linux-specific ordering,
- * the rest comes from the generic header:
- */
-#define RLIMIT_NOFILE		6	/* max number of open files */
-#define RLIMIT_NPROC		7	/* max number of processes */
-
-/*
- * SuS says limits have to be unsigned.
- * We make this unsigned, but keep the
- * old value for compatibility:
- */
-#define RLIM_INFINITY		0x7fffffff
-
-#include <asm-generic/resource.h>
-
-#endif /* !(_SPARC_RESOURCE_H) */
diff --git a/include/asm-sparc/ross.h b/include/asm-sparc/ross.h
deleted file mode 100644
index ecb6e81786a6..000000000000
--- a/include/asm-sparc/ross.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * ross.h: Ross module specific definitions and defines.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_ROSS_H
-#define _SPARC_ROSS_H
-
-#include <asm/asi.h>
-#include <asm/page.h>
-
-/* Ross made Hypersparcs have a %psr 'impl' field of '0001'.  The 'vers'
- * field has '1111'.
- */
-
-/* The MMU control register fields on the HyperSparc.
- *
- * -----------------------------------------------------------------
- * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
- * -----------------------------------------------------------------
- *  31    24 23-22 21  20  19 18-15 14 13 12 11 10  9   8 7-2  1  0
- *
- * Phew, lots of fields there ;-)
- *
- * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
- * SE: Snoop Enable, turns on bus snooping for cache activity if one.
- * WBE: Write Buffer Enable, one turns it on.
- * MID: The ModuleID of the chip for MBus transactions.
- * BM: Boot-Mode. One indicates the MMU is in boot mode.
- * C: Indicates whether accesses are cachable while the MMU is
- *    disabled.
- * CS: Cache Size -- 0 = 128k, 1 = 256k
- * MR: Memory Reflection, one indicates that the memory bus connected
- *     to the MBus supports memory reflection.
- * CM: Cache Mode -- 0 = write-through, 1 = copy-back
- * CE: Cache Enable -- 0 = no caching, 1 = cache is on
- * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
- *                 1 = faults from supervisor mode do not generate traps
- * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
- */
-
-#define HYPERSPARC_CWENABLE   0x00200000
-#define HYPERSPARC_SBENABLE   0x00100000
-#define HYPERSPARC_WBENABLE   0x00080000
-#define HYPERSPARC_MIDMASK    0x00078000
-#define HYPERSPARC_BMODE      0x00004000
-#define HYPERSPARC_ACENABLE   0x00002000
-#define HYPERSPARC_CSIZE      0x00001000
-#define HYPERSPARC_MRFLCT     0x00000800
-#define HYPERSPARC_CMODE      0x00000400
-#define HYPERSPARC_CENABLE    0x00000100
-#define HYPERSPARC_NFAULT     0x00000002
-#define HYPERSPARC_MENABLE    0x00000001
-
-
-/* The ICCR instruction cache register on the HyperSparc.
- *
- * -----------------------------------------------
- * |                                 | FTD | ICE |
- * -----------------------------------------------
- *  31                                  1     0
- *
- * This register is accessed using the V8 'wrasr' and 'rdasr'
- * opcodes, since not all assemblers understand them and those
- * that do use different semantics I will just hard code the
- * instruction with a '.word' statement.
- *
- * FTD:  If set to one flush instructions executed during an
- *       instruction cache hit occurs, the corresponding line
- *       for said cache-hit is invalidated.  If FTD is zero,
- *       an unimplemented 'flush' trap will occur when any
- *       flush is executed by the processor.
- *
- * ICE:  If set to one, the instruction cache is enabled.  If
- *       zero, the cache will not be used for instruction fetches.
- *
- * All other bits are read as zeros, and writes to them have no
- * effect.
- *
- * Wheee, not many assemblers understand the %iccr register nor
- * the generic asr r/w instructions.
- *
- *  1000 0011 0100 0111 1100 0000 0000 0000   ! rd %iccr, %g1
- *
- * 0x  8    3    4    7    c    0    0    0   ! 0x8347c000
- *
- *  1011 1111 1000 0000 0110 0000 0000 0000   ! wr %g1, 0x0, %iccr
- *
- * 0x  b    f    8    0    6    0    0    0   ! 0xbf806000
- *
- */
-
-#define HYPERSPARC_ICCR_FTD     0x00000002
-#define HYPERSPARC_ICCR_ICE     0x00000001
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned int get_ross_icr(void)
-{
-	unsigned int icreg;
-
-	__asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
-			     "mov %%g1, %0\n\t"
-			     : "=r" (icreg)
-			     : /* no inputs */
-			     : "g1", "memory");
-
-	return icreg;
-}
-
-static inline void put_ross_icr(unsigned int icreg)
-{
-	__asm__ __volatile__("or %%g0, %0, %%g1\n\t"
-			     ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
-			     "nop\n\t"
-			     "nop\n\t"
-			     "nop\n\t"
-			     : /* no outputs */
-			     : "r" (icreg)
-			     : "g1", "memory");
-
-	return;
-}
-
-/* HyperSparc specific cache flushing. */
-
-/* This is for the on-chip instruction cache. */
-static inline void hyper_flush_whole_icache(void)
-{
-	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
-			     : /* no outputs */
-			     : "i" (ASI_M_FLUSH_IWHOLE)
-			     : "memory");
-	return;
-}
-
-extern int vac_cache_size;
-extern int vac_line_size;
-
-static inline void hyper_clear_all_tags(void)
-{
-	unsigned long addr;
-
-	for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
-		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-				     : /* no outputs */
-				     : "r" (addr), "i" (ASI_M_DATAC_TAG)
-				     : "memory");
-}
-
-static inline void hyper_flush_unconditional_combined(void)
-{
-	unsigned long addr;
-
-	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
-		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-				     : /* no outputs */
-				     : "r" (addr), "i" (ASI_M_FLUSH_CTX)
-				     : "memory");
-}
-
-static inline void hyper_flush_cache_user(void)
-{
-	unsigned long addr;
-
-	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
-		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-				     : /* no outputs */
-				     : "r" (addr), "i" (ASI_M_FLUSH_USER)
-				     : "memory");
-}
-
-static inline void hyper_flush_cache_page(unsigned long page)
-{
-	unsigned long end;
-
-	page &= PAGE_MASK;
-	end = page + PAGE_SIZE;
-	while (page < end) {
-		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-				     : /* no outputs */
-				     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
-				     : "memory");
-		page += vac_line_size;
-	}
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_ROSS_H) */
diff --git a/include/asm-sparc/rtc.h b/include/asm-sparc/rtc.h
deleted file mode 100644
index f9ecb1fe2ecd..000000000000
--- a/include/asm-sparc/rtc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * rtc.h: Definitions for access to the Mostek real time clock
- *
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _RTC_H
-#define _RTC_H
-
-#include <linux/ioctl.h>
-
-struct rtc_time
-{
-	int	sec;	/* Seconds (0-59) */
-	int	min;	/* Minutes (0-59) */
-	int	hour;	/* Hour (0-23) */
-	int	dow;	/* Day of the week (1-7) */
-	int	dom;	/* Day of the month (1-31) */
-	int	month;	/* Month of year (1-12) */
-	int	year;	/* Year (0-99) */
-};
-
-#define RTCGET _IOR('p', 20, struct rtc_time)
-#define RTCSET _IOW('p', 21, struct rtc_time)
-
-#endif
diff --git a/include/asm-sparc/sbi.h b/include/asm-sparc/sbi.h
deleted file mode 100644
index 5eb7f1965d33..000000000000
--- a/include/asm-sparc/sbi.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * sbi.h:  SBI (Sbus Interface on sun4d) definitions
- *
- * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
- */
-
-#ifndef _SPARC_SBI_H
-#define _SPARC_SBI_H
-
-#include <asm/obio.h>
-
-/* SBI */
-struct sbi_regs {
-/* 0x0000 */	u32		cid;		/* Component ID */
-/* 0x0004 */	u32		ctl;		/* Control */
-/* 0x0008 */	u32		status;		/* Status */
-		u32		_unused1;
-		
-/* 0x0010 */	u32		cfg0;		/* Slot0 config reg */
-/* 0x0014 */	u32		cfg1;		/* Slot1 config reg */
-/* 0x0018 */	u32		cfg2;		/* Slot2 config reg */
-/* 0x001c */	u32		cfg3;		/* Slot3 config reg */
-
-/* 0x0020 */	u32		stb0;		/* Streaming buf control for slot 0 */
-/* 0x0024 */	u32		stb1;		/* Streaming buf control for slot 1 */
-/* 0x0028 */	u32		stb2;		/* Streaming buf control for slot 2 */
-/* 0x002c */	u32		stb3;		/* Streaming buf control for slot 3 */
-
-/* 0x0030 */	u32		intr_state;	/* Interrupt state */
-/* 0x0034 */	u32		intr_tid;	/* Interrupt target ID */
-/* 0x0038 */	u32		intr_diag;	/* Interrupt diagnostics */
-};
-
-#define SBI_CID			0x02800000
-#define SBI_CTL			0x02800004
-#define SBI_STATUS		0x02800008
-#define SBI_CFG0		0x02800010
-#define SBI_CFG1		0x02800014
-#define SBI_CFG2		0x02800018
-#define SBI_CFG3		0x0280001c
-#define SBI_STB0		0x02800020
-#define SBI_STB1		0x02800024
-#define SBI_STB2		0x02800028
-#define SBI_STB3		0x0280002c
-#define SBI_INTR_STATE		0x02800030
-#define SBI_INTR_TID		0x02800034
-#define SBI_INTR_DIAG		0x02800038
-
-/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */
-#define SBI_CFG_BURST_MASK	0x0000001e
-
-/* How to make devid from sbi no */
-#define SBI2DEVID(sbino) ((sbino<<4)|2)
-
-/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level
- *
- *		   +-------+-------+-------+-------+-------+-------+-------+-------+
- *  SBUS IRQ LEVEL |   7   |   6   |   5   |   4   |   3   |   2   |   1   |       |
- *		   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser |
- *  SLOT #         |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|  ved  |
- *                 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+
- *  Bits           31      27      23      19      15      11      7       3      0
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline int acquire_sbi(int devid, int mask)
-{
-	__asm__ __volatile__ ("swapa [%2] %3, %0" :
-			      "=r" (mask) :
-			      "0" (mask),
-			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
-			      "i" (ASI_M_CTL));
-	return mask;
-}
-
-static inline void release_sbi(int devid, int mask)
-{
-	__asm__ __volatile__ ("sta %0, [%1] %2" : :
-			      "r" (mask),
-			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
-			      "i" (ASI_M_CTL));
-}
-
-static inline void set_sbi_tid(int devid, int targetid)
-{
-	__asm__ __volatile__ ("sta %0, [%1] %2" : :
-			      "r" (targetid),
-			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID),
-			      "i" (ASI_M_CTL));
-}
-
-static inline int get_sbi_ctl(int devid, int cfgno)
-{
-	int cfg;
-	
-	__asm__ __volatile__ ("lda [%1] %2, %0" :
-			      "=r" (cfg) :
-			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
-			      "i" (ASI_M_CTL));
-	return cfg;
-}
-
-static inline void set_sbi_ctl(int devid, int cfgno, int cfg)
-{
-	__asm__ __volatile__ ("sta %0, [%1] %2" : :
-			      "r" (cfg),
-			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
-			      "i" (ASI_M_CTL));
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* !(_SPARC_SBI_H) */
diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h
deleted file mode 100644
index f1d2fe1c9a30..000000000000
--- a/include/asm-sparc/sbus.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * sbus.h:  Defines for the Sun SBus.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_SBUS_H
-#define _SPARC_SBUS_H
-
-#include <linux/dma-mapping.h>
-#include <linux/ioport.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/scatterlist.h>
-
-/* We scan which devices are on the SBus using the PROM node device
- * tree.  SBus devices are described in two different ways.  You can
- * either get an absolute address at which to access the device, or
- * you can get a SBus 'slot' number and an offset within that slot.
- */
-
-/* The base address at which to calculate device OBIO addresses. */
-#define SUN_SBUS_BVADDR        0xf8000000
-#define SBUS_OFF_MASK          0x01ffffff
-
-/* These routines are used to calculate device address from slot
- * numbers + offsets, and vice versa.
- */
-
-static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
-{
-  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
-}
-
-static inline int sbus_dev_slot(unsigned long dev_addr)
-{
-  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
-}
-
-struct sbus_bus;
-
-/* Linux SBUS device tables */
-struct sbus_dev {
-	struct of_device	ofdev;
-	struct sbus_bus		*bus;
-	struct sbus_dev		*next;
-	struct sbus_dev		*child;
-	struct sbus_dev		*parent;
-	int prom_node;	
-	char prom_name[64];
-	int slot;
-
-	struct resource resource[PROMREG_MAX];
-
-	struct linux_prom_registers reg_addrs[PROMREG_MAX];
-	int num_registers;
-
-	struct linux_prom_ranges device_ranges[PROMREG_MAX];
-	int num_device_ranges;
-
-	unsigned int irqs[4];
-	int num_irqs;
-};
-#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
-
-/* This struct describes the SBus(s) found on this machine. */
-struct sbus_bus {
-	struct of_device	ofdev;
-	struct sbus_dev		*devices;	/* Link to devices on this SBus */
-	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
-	int			prom_node;	/* PROM device tree node for this SBus */
-	char			prom_name[64];  /* Usually "sbus" or "sbi" */
-	int			clock_freq;
-
-	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-	int num_sbus_ranges;
-
-	int devid;
-	int board;
-};
-#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
-
-extern struct sbus_bus *sbus_root;
-
-static inline int
-sbus_is_slave(struct sbus_dev *dev)
-{
-	/* XXX Have to write this for sun4c's */
-	return 0;
-}
-
-/* Device probing routines could find these handy */
-#define for_each_sbus(bus) \
-        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
-
-#define for_each_sbusdev(device, bus) \
-        for((device) = (bus)->devices; (device); (device)=(device)->next)
-        
-#define for_all_sbusdev(device, bus) \
-	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
-		for ((device) = (bus)->devices; (device); (device) = (device)->next)
-
-/* Driver DVMA interfaces. */
-#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
-#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
-extern void sbus_set_sbus64(struct sbus_dev *, int);
-extern void sbus_fill_device_irq(struct sbus_dev *);
-
-/* These yield IOMMU mappings in consistent mode. */
-extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
-extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
-void prom_adjust_ranges(struct linux_prom_ranges *, int,
-			struct linux_prom_ranges *, int);
-
-#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
-#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
-#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
-#define	SBUS_DMA_NONE		DMA_NONE
-
-/* All the rest use streaming mode mappings. */
-extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
-extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
-extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
-extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Finally, allow explicit synchronization of streamable mappings. */
-extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
-#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
-extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
-extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
-#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
-extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
-
-/* Eric Brower (ebrower@usa.net)
- * Translate SBus interrupt levels to ino values--
- * this is used when converting sbus "interrupts" OBP 
- * node values to "intr" node values, and is platform 
- * dependent.  If only we could call OBP with 
- * "sbus-intr>cpu (sbint -- ino)" from kernel...
- * See .../drivers/sbus/sbus.c for details.
- */
-BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
-#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
-
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
-extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
-extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
-extern int sbus_arch_preinit(void);
-extern void sbus_arch_postinit(void);
-
-#endif /* !(_SPARC_SBUS_H) */
diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h
deleted file mode 100644
index c82609ca1d0f..000000000000
--- a/include/asm-sparc/scatterlist.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _SPARC_SCATTERLIST_H
-#define _SPARC_SCATTERLIST_H
-
-#include <linux/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-
-	unsigned int length;
-
-	__u32 dvma_address; /* A place to hang host-specific addresses at. */
-	__u32 dvma_length;
-};
-
-#define sg_dma_address(sg) ((sg)->dvma_address)
-#define sg_dma_len(sg)     ((sg)->dvma_length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#define ARCH_HAS_SG_CHAIN
-
-#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/include/asm-sparc/sections.h b/include/asm-sparc/sections.h
deleted file mode 100644
index 6832841df051..000000000000
--- a/include/asm-sparc/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC_SECTIONS_H
-#define _SPARC_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-sparc/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-sparc/sembuf.h b/include/asm-sparc/sembuf.h
deleted file mode 100644
index a79c4bb3c08a..000000000000
--- a/include/asm-sparc/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _SPARC_SEMBUF_H
-#define _SPARC_SEMBUF_H
-
-/* 
- * The semid64_ds structure for sparc architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	unsigned int	__pad1;
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned int	__pad2;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _SPARC64_SEMBUF_H */
diff --git a/include/asm-sparc/setup.h b/include/asm-sparc/setup.h
deleted file mode 100644
index b3af958a2ad2..000000000000
--- a/include/asm-sparc/setup.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *	Just a place holder. 
- */
-
-#ifndef _SPARC_SETUP_H
-#define _SPARC_SETUP_H
-
-#define COMMAND_LINE_SIZE	256
-
-#endif /* _SPARC_SETUP_H */
diff --git a/include/asm-sparc/sfp-machine.h b/include/asm-sparc/sfp-machine.h
deleted file mode 100644
index 266a42b8f99f..000000000000
--- a/include/asm-sparc/sfp-machine.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* Machine-dependent software floating-point definitions.
-   Sparc userland (_Q_*) version.
-   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Richard Henderson (rth@cygnus.com),
-		  Jakub Jelinek (jj@ultra.linux.cz),
-		  David S. Miller (davem@redhat.com) and
-		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If
-   not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-
-   
-#define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
-
-#define _FP_MUL_MEAT_S(R,X,Y)					\
-  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y)					\
-  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y)					\
-  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
-#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
-#define _FP_NANSIGN_S		0
-#define _FP_NANSIGN_D		0
-#define _FP_NANSIGN_Q		0
-
-#define _FP_KEEPNANFRACP 1
-
-/* If one NaN is signaling and the other is not,
- * we choose that one, otherwise we choose X.
- */
-/* For _Qp_* and _Q_*, this should prefer X, for
- * CPU instruction emulation this should prefer Y.
- * (see SPAMv9 B.2.2 section).
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
-  do {								\
-    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
-	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
-      {								\
-	R##_s = X##_s;						\
-	_FP_FRAC_COPY_##wc(R,X);				\
-      }								\
-    else							\
-      {								\
-	R##_s = Y##_s;						\
-	_FP_FRAC_COPY_##wc(R,Y);				\
-      }								\
-    R##_c = FP_CLS_NAN;						\
-  } while (0)
-
-/* Some assembly to speed things up. */
-#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
-  __asm__ ("addcc %r7,%8,%2\n\t"					\
-	   "addxcc %r5,%6,%1\n\t"					\
-	   "addx %r3,%4,%0\n"						\
-	   : "=r" ((USItype)(r2)),					\
-	     "=&r" ((USItype)(r1)),					\
-	     "=&r" ((USItype)(r0))					\
-	   : "%rJ" ((USItype)(x2)),					\
-	     "rI" ((USItype)(y2)),					\
-	     "%rJ" ((USItype)(x1)),					\
-	     "rI" ((USItype)(y1)),					\
-	     "%rJ" ((USItype)(x0)),					\
-	     "rI" ((USItype)(y0))					\
-	   : "cc")
-
-#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
-  __asm__ ("subcc %r7,%8,%2\n\t"					\
-	    "subxcc %r5,%6,%1\n\t"					\
-	    "subx %r3,%4,%0\n"						\
-	   : "=r" ((USItype)(r2)),					\
-	     "=&r" ((USItype)(r1)),					\
-	     "=&r" ((USItype)(r0))					\
-	   : "%rJ" ((USItype)(x2)),					\
-	     "rI" ((USItype)(y2)),					\
-	     "%rJ" ((USItype)(x1)),					\
-	     "rI" ((USItype)(y1)),					\
-	     "%rJ" ((USItype)(x0)),					\
-	     "rI" ((USItype)(y0))					\
-	   : "cc")
-
-#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
-  do {									\
-    /* We need to fool gcc,  as we need to pass more than 10		\
-       input/outputs.  */						\
-    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
-    __asm__ __volatile__ (						\
-	    "addcc %r8,%9,%1\n\t"					\
-	    "addxcc %r6,%7,%0\n\t"					\
-	    "addxcc %r4,%5,%%g2\n\t"					\
-	    "addx %r2,%3,%%g1\n\t"					\
-	   : "=&r" ((USItype)(r1)),					\
-	     "=&r" ((USItype)(r0))					\
-	   : "%rJ" ((USItype)(x3)),					\
-	     "rI" ((USItype)(y3)),					\
-	     "%rJ" ((USItype)(x2)),					\
-	     "rI" ((USItype)(y2)),					\
-	     "%rJ" ((USItype)(x1)),					\
-	     "rI" ((USItype)(y1)),					\
-	     "%rJ" ((USItype)(x0)),					\
-	     "rI" ((USItype)(y0))					\
-	   : "cc", "g1", "g2");						\
-    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
-    r3 = _t1; r2 = _t2;							\
-  } while (0)
-
-#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
-  do {									\
-    /* We need to fool gcc,  as we need to pass more than 10		\
-       input/outputs.  */						\
-    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
-    __asm__ __volatile__ (						\
-	    "subcc %r8,%9,%1\n\t"					\
-	    "subxcc %r6,%7,%0\n\t"					\
-	    "subxcc %r4,%5,%%g2\n\t"					\
-	    "subx %r2,%3,%%g1\n\t"					\
-	   : "=&r" ((USItype)(r1)),					\
-	     "=&r" ((USItype)(r0))					\
-	   : "%rJ" ((USItype)(x3)),					\
-	     "rI" ((USItype)(y3)),					\
-	     "%rJ" ((USItype)(x2)),					\
-	     "rI" ((USItype)(y2)),					\
-	     "%rJ" ((USItype)(x1)),					\
-	     "rI" ((USItype)(y1)),					\
-	     "%rJ" ((USItype)(x0)),					\
-	     "rI" ((USItype)(y0))					\
-	   : "cc", "g1", "g2");						\
-    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
-    r3 = _t1; r2 = _t2;							\
-  } while (0)
-
-#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
-
-#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0)
-
-#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)					\
-  __asm__ ("addcc %3,%4,%3\n\t"						\
-	   "addxcc %2,%%g0,%2\n\t"					\
-	   "addxcc %1,%%g0,%1\n\t"					\
-	   "addx %0,%%g0,%0\n\t"					\
-	   : "=&r" ((USItype)(x3)),					\
-	     "=&r" ((USItype)(x2)),					\
-	     "=&r" ((USItype)(x1)),					\
-	     "=&r" ((USItype)(x0))					\
-	   : "rI" ((USItype)(i)),					\
-	     "0" ((USItype)(x3)),					\
-	     "1" ((USItype)(x2)),					\
-	     "2" ((USItype)(x1)),					\
-	     "3" ((USItype)(x0))					\
-	   : "cc")
-
-#ifndef CONFIG_SMP
-extern struct task_struct *last_task_used_math;
-#endif
-
-/* Obtain the current rounding mode. */
-#ifndef FP_ROUNDMODE
-#ifdef CONFIG_SMP
-#define FP_ROUNDMODE	((current->thread.fsr >> 30) & 0x3)
-#else
-#define FP_ROUNDMODE	((last_task_used_math->thread.fsr >> 30) & 0x3)
-#endif
-#endif
-
-/* Exception flags. */
-#define FP_EX_INVALID		(1 << 4)
-#define FP_EX_OVERFLOW		(1 << 3)
-#define FP_EX_UNDERFLOW		(1 << 2)
-#define FP_EX_DIVZERO		(1 << 1)
-#define FP_EX_INEXACT		(1 << 0)
-
-#define FP_HANDLE_EXCEPTIONS return _fex
-
-#ifdef CONFIG_SMP
-#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex)
-#else
-#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex)
-#endif
-
-#ifdef CONFIG_SMP
-#define FP_TRAPPING_EXCEPTIONS ((current->thread.fsr >> 23) & 0x1f)
-#else
-#define FP_TRAPPING_EXCEPTIONS ((last_task_used_math->thread.fsr >> 23) & 0x1f)
-#endif
-
-#endif
diff --git a/include/asm-sparc/shmbuf.h b/include/asm-sparc/shmbuf.h
deleted file mode 100644
index 1ff9da8bec73..000000000000
--- a/include/asm-sparc/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _SPARC_SHMBUF_H
-#define _SPARC_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for sparc architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	unsigned int		__pad1;
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned int		__pad2;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned int		__pad3;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _SPARC_SHMBUF_H */
diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h
deleted file mode 100644
index 59a1243c12f3..000000000000
--- a/include/asm-sparc/shmparam.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASMSPARC_SHMPARAM_H
-#define _ASMSPARC_SHMPARAM_H
-
-#define __ARCH_FORCE_SHMLBA 	1
-
-extern int vac_cache_size;
-#define SHMLBA (vac_cache_size ? vac_cache_size : \
-		(sparc_cpu_model == sun4c ? (64 * 1024) : \
-		 (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE)))
-
-#endif /* _ASMSPARC_SHMPARAM_H */
diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h
deleted file mode 100644
index c5fb60dcbd75..000000000000
--- a/include/asm-sparc/sigcontext.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef __SPARC_SIGCONTEXT_H
-#define __SPARC_SIGCONTEXT_H
-
-#ifdef __KERNEL__
-#include <asm/ptrace.h>
-
-#ifndef __ASSEMBLY__
-
-#define __SUNOS_MAXWIN   31
-
-/* This is what SunOS does, so shall I. */
-struct sigcontext {
-	int sigc_onstack;      /* state to restore */
-	int sigc_mask;         /* sigmask to restore */
-	int sigc_sp;           /* stack pointer */
-	int sigc_pc;           /* program counter */
-	int sigc_npc;          /* next program counter */
-	int sigc_psr;          /* for condition codes etc */
-	int sigc_g1;           /* User uses these two registers */
-	int sigc_o0;           /* within the trampoline code. */
-
-	/* Now comes information regarding the users window set
-	 * at the time of the signal.
-	 */
-	int sigc_oswins;       /* outstanding windows */
-
-	/* stack ptrs for each regwin buf */
-	char *sigc_spbuf[__SUNOS_MAXWIN];
-
-	/* Windows to restore after signal */
-	struct {
-		unsigned long	locals[8];
-		unsigned long	ins[8];
-	} sigc_wbuf[__SUNOS_MAXWIN];
-};
-
-typedef struct {
-	struct {
-		unsigned long psr;
-		unsigned long pc;
-		unsigned long npc;
-		unsigned long y;
-		unsigned long u_regs[16]; /* globals and ins */
-	}		si_regs;
-	int		si_mask;
-} __siginfo_t;
-
-typedef struct {
-	unsigned   long si_float_regs [32];
-	unsigned   long si_fsr;
-	unsigned   long si_fpqdepth;
-	struct {
-		unsigned long *insn_addr;
-		unsigned long insn;
-	} si_fpqueue [16];
-} __siginfo_fpu_t;
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* (__KERNEL__) */
-
-#endif /* !(__SPARC_SIGCONTEXT_H) */
diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h
deleted file mode 100644
index 3c71af135c52..000000000000
--- a/include/asm-sparc/siginfo.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _SPARC_SIGINFO_H
-#define _SPARC_SIGINFO_H
-
-#define __ARCH_SI_UID_T		unsigned int
-#define __ARCH_SI_TRAPNO
-
-#include <asm-generic/siginfo.h>
-
-#define SI_NOINFO	32767		/* no information in siginfo_t */
-
-/*
- * SIGEMT si_codes
- */
-#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
-#define NSIGEMT		1
-
-#endif /* !(_SPARC_SIGINFO_H) */
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
deleted file mode 100644
index 683657d6e685..000000000000
--- a/include/asm-sparc/signal.h
+++ /dev/null
@@ -1,207 +0,0 @@
-#ifndef _ASMSPARC_SIGNAL_H
-#define _ASMSPARC_SIGNAL_H
-
-#include <asm/sigcontext.h>
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#include <linux/personality.h>
-#include <linux/types.h>
-#endif
-#endif
-
-/* On the Sparc the signal handlers get passed a 'sub-signal' code
- * for certain signal types, which we document here.
- */
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define    SUBSIG_STACK       0
-#define    SUBSIG_ILLINST     2
-#define    SUBSIG_PRIVINST    3
-#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
-
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-
-#define SIGEMT           7
-#define    SUBSIG_TAG    10
-
-#define SIGFPE		 8
-#define    SUBSIG_FPDISABLED     0x400
-#define    SUBSIG_FPERROR        0x404
-#define    SUBSIG_FPINTOVFL      0x001
-#define    SUBSIG_FPSTSIG        0x002
-#define    SUBSIG_IDIVZERO       0x014
-#define    SUBSIG_FPINEXACT      0x0c4
-#define    SUBSIG_FPDIVZERO      0x0c8
-#define    SUBSIG_FPUNFLOW       0x0cc
-#define    SUBSIG_FPOPERROR      0x0d0
-#define    SUBSIG_FPOVFLOW       0x0d4
-
-#define SIGKILL		 9
-#define SIGBUS          10
-#define    SUBSIG_BUSTIMEOUT    1
-#define    SUBSIG_ALIGNMENT     2
-#define    SUBSIG_MISCERROR     5
-
-#define SIGSEGV		11
-#define    SUBSIG_NOMAPPING     3
-#define    SUBSIG_PROTECTION    4
-#define    SUBSIG_SEGERROR      5
-
-#define SIGSYS		12
-
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGURG          16
-
-/* SunOS values which deviate from the Linux/i386 ones */
-#define SIGSTOP		17
-#define SIGTSTP		18
-#define SIGCONT		19
-#define SIGCHLD		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGIO		23
-#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGLOST		29
-#define SIGPWR		SIGLOST
-#define SIGUSR1		30
-#define SIGUSR2		31
-
-/* Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-
-#define __OLD_NSIG	32
-#define __NEW_NSIG	64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(__NEW_NSIG / _NSIG_BPW)
-
-#define SIGRTMIN	32
-#define SIGRTMAX	__NEW_NSIG
-
-#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
-#define	_NSIG		__NEW_NSIG
-#define __new_sigset_t	sigset_t
-#define __new_sigaction	sigaction
-#define __old_sigset_t	old_sigset_t
-#define __old_sigaction	old_sigaction
-#else
-#define _NSIG		__OLD_NSIG
-#define __old_sigset_t	sigset_t
-#define __old_sigaction	sigaction
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long __old_sigset_t;
-
-typedef struct {
-	unsigned long	sig[_NSIG_WORDS];
-} __new_sigset_t;
-
-
-#ifdef __KERNEL__
-/* A SunOS sigstack */
-struct sigstack {
-	char *the_stack;
-	int   cur_status;
-};
-#endif
-
-/* Sigvec flags */
-#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
-#define _SV_INTR      2u    /* Sig return should not restart system call */
-#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
-#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
-
-/*
- * sa_flags values: SA_STACK is not currently supported, but will allow the
- * usage of signal stacks by using the (now obsolete) sa_restorer field in
- * the sigaction structure as a stack pointer. This is now possible due to
- * the changes in signal handling. LBT 010493.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- */
-#define SA_NOCLDSTOP	_SV_IGNCHILD
-#define SA_STACK	_SV_SSTACK
-#define SA_ONSTACK	_SV_SSTACK
-#define SA_RESTART	_SV_INTR
-#define SA_ONESHOT	_SV_RESET
-#define SA_NOMASK	0x20u
-#define SA_NOCLDWAIT	0x100u
-#define SA_SIGINFO	0x200u
-
-#define SIG_BLOCK          0x01	/* for blocking signals */
-#define SIG_UNBLOCK        0x02	/* for unblocking signals */
-#define SIG_SETMASK        0x04	/* for setting the signal mask */
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	4096
-#define SIGSTKSZ	16384
-
-#ifdef __KERNEL__
-/*
- * DJHR
- * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
- * interrupt handler's irq structure should be statically allocated
- * by the request_irq routine.
- * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
- * of interrupt usage and that sucks. Also without a flag like this
- * it may be possible for the free_irq routine to attempt to free
- * statically allocated data.. which is NOT GOOD.
- *
- */
-#define SA_STATIC_ALLOC		0x8000
-#endif
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct __new_sigaction {
-	__sighandler_t	sa_handler;
-	unsigned long	sa_flags;
-	void		(*sa_restorer)(void);	/* Not used by Linux/SPARC */
-	__new_sigset_t	sa_mask;
-};
-
-struct k_sigaction {
-	struct __new_sigaction	sa;
-	void			__user *ka_restorer;
-};
-
-struct __old_sigaction {
-	__sighandler_t	sa_handler;
-	__old_sigset_t	sa_mask;
-	unsigned long	sa_flags;
-	void		(*sa_restorer) (void);	/* not used by Linux/SPARC */
-};
-
-typedef struct sigaltstack {
-	void		__user *ss_sp;
-	int		ss_flags;
-	size_t		ss_size;
-} stack_t;
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h
deleted file mode 100644
index b61e74bea06a..000000000000
--- a/include/asm-sparc/smp.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* smp.h: Sparc specific SMP stuff.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_SMP_H
-#define _SPARC_SMP_H
-
-#include <linux/threads.h>
-#include <asm/head.h>
-#include <asm/btfixup.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/cpumask.h>
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_SMP
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-#include <asm/asi.h>
-#include <asm/atomic.h>
-
-/*
- *	Private routines/data
- */
- 
-extern unsigned char boot_cpu_id;
-extern cpumask_t phys_cpu_present_map;
-#define cpu_possible_map phys_cpu_present_map
-
-typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
-		       unsigned long, unsigned long);
-
-/*
- *	General functions that each host system must provide.
- */
- 
-void sun4m_init_smp(void);
-void sun4d_init_smp(void);
-
-void smp_callin(void);
-void smp_boot_cpus(void);
-void smp_store_cpu_info(int);
-
-struct seq_file;
-void smp_bogo(struct seq_file *);
-void smp_info(struct seq_file *);
-
-BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
-BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
-BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
-BTFIXUPDEF_BLACKBOX(load_current)
-
-#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
-
-static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
-static inline void xc1(smpfunc_t func, unsigned long arg1)
-{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
-static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
-{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
-static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-			   unsigned long arg3)
-{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
-static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-			   unsigned long arg3, unsigned long arg4)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
-static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-			   unsigned long arg3, unsigned long arg4, unsigned long arg5)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
-
-static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
-{
-	xc1((smpfunc_t)func, (unsigned long)info);
-	return 0;
-}
-
-static inline int cpu_logical_map(int cpu)
-{
-	return cpu;
-}
-
-static inline int hard_smp4m_processor_id(void)
-{
-	int cpuid;
-
-	__asm__ __volatile__("rd %%tbr, %0\n\t"
-			     "srl %0, 12, %0\n\t"
-			     "and %0, 3, %0\n\t" :
-			     "=&r" (cpuid));
-	return cpuid;
-}
-
-static inline int hard_smp4d_processor_id(void)
-{
-	int cpuid;
-
-	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
-			     "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1));
-	return cpuid;
-}
-
-#ifndef MODULE
-static inline int hard_smp_processor_id(void)
-{
-	int cpuid;
-
-	/* Black box - sun4m
-		__asm__ __volatile__("rd %%tbr, %0\n\t"
-				     "srl %0, 12, %0\n\t"
-				     "and %0, 3, %0\n\t" :
-				     "=&r" (cpuid));
-	             - sun4d
-	   	__asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t"
-	   			     "nop; nop" :
-	   			     "=&r" (cpuid));
-	   See btfixup.h and btfixupprep.c to understand how a blackbox works.
-	 */
-	__asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t"
-			     "sethi %%hi(boot_cpu_id), %0\n\t"
-			     "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" :
-			     "=&r" (cpuid));
-	return cpuid;
-}
-#else
-static inline int hard_smp_processor_id(void)
-{
-	int cpuid;
-	
-	__asm__ __volatile__("mov %%o7, %%g1\n\t"
-			     "call ___f___hard_smp_processor_id\n\t"
-			     " nop\n\t"
-			     "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2");
-	return cpuid;
-}
-#endif
-
-#define raw_smp_processor_id()		(current_thread_info()->cpu)
-
-#define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
-#define prof_counter(__cpu)		cpu_data(__cpu).counter
-
-void smp_setup_cpu_possible_map(void);
-
-#endif /* !(__ASSEMBLY__) */
-
-/* Sparc specific messages. */
-#define MSG_CROSS_CALL         0x0005       /* run func on cpus */
-
-/* Empirical PROM processor mailbox constants.  If the per-cpu mailbox
- * contains something other than one of these then the ipi is from
- * Linux's active_kernel_processor.  This facility exists so that
- * the boot monitor can capture all the other cpus when one catches
- * a watchdog reset or the user enters the monitor using L1-A keys.
- */
-#define MBOX_STOPCPU          0xFB
-#define MBOX_IDLECPU          0xFC
-#define MBOX_IDLECPU2         0xFD
-#define MBOX_STOPCPU2         0xFE
-
-#else /* SMP */
-
-#define hard_smp_processor_id()		0
-#define smp_setup_cpu_possible_map() do { } while (0)
-
-#endif /* !(SMP) */
-
-#define NO_PROC_ID            0xFF
-
-#endif /* !(_SPARC_SMP_H) */
diff --git a/include/asm-sparc/smpprim.h b/include/asm-sparc/smpprim.h
deleted file mode 100644
index eb849d862c64..000000000000
--- a/include/asm-sparc/smpprim.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  smpprim.h:  SMP locking primitives on the Sparc
- *
- *  God knows we won't be actually using this code for some time
- *  but I thought I'd write it since I knew how.
- *
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __SPARC_SMPPRIM_H
-#define __SPARC_SMPPRIM_H
-
-/* Test and set the unsigned byte at ADDR to 1.  Returns the previous
- * value.  On the Sparc we use the ldstub instruction since it is
- * atomic.
- */
-
-static inline __volatile__ char test_and_set(void *addr)
-{
-	char state = 0;
-
-	__asm__ __volatile__("ldstub [%0], %1         ! test_and_set\n\t"
-			     "=r" (addr), "=r" (state) :
-			     "0" (addr), "1" (state) : "memory");
-
-	return state;
-}
-
-/* Initialize a spin-lock. */
-static inline __volatile__ smp_initlock(void *spinlock)
-{
-	/* Unset the lock. */
-	*((unsigned char *) spinlock) = 0;
-
-	return;
-}
-
-/* This routine spins until it acquires the lock at ADDR. */
-static inline __volatile__ smp_lock(void *addr)
-{
-	while(test_and_set(addr) == 0xff)
-		;
-
-	/* We now have the lock */
-	return;
-}
-
-/* This routine releases the lock at ADDR. */
-static inline __volatile__ smp_unlock(void *addr)
-{
-	*((unsigned char *) addr) = 0;
-}
-
-#endif /* !(__SPARC_SMPPRIM_H) */
diff --git a/include/asm-sparc/socket.h b/include/asm-sparc/socket.h
deleted file mode 100644
index bf50d0c2d583..000000000000
--- a/include/asm-sparc/socket.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	0xffff
-
-#define SO_DEBUG	0x0001
-#define SO_PASSCRED	0x0002
-#define SO_REUSEADDR	0x0004
-#define SO_KEEPALIVE	0x0008
-#define SO_DONTROUTE	0x0010
-#define SO_BROADCAST	0x0020
-#define SO_PEERCRED	0x0040
-#define SO_LINGER	0x0080
-#define SO_OOBINLINE	0x0100
-/* To add :#define SO_REUSEPORT 0x0200 */
-#define SO_BSDCOMPAT    0x0400
-#define SO_RCVLOWAT     0x0800
-#define SO_SNDLOWAT     0x1000
-#define SO_RCVTIMEO     0x2000
-#define SO_SNDTIMEO     0x4000
-#define SO_ACCEPTCONN	0x8000
-
-#define SO_SNDBUF	0x1001
-#define SO_RCVBUF	0x1002
-#define SO_SNDBUFFORCE	0x100a
-#define SO_RCVBUFFORCE	0x100b
-#define SO_ERROR	0x1007
-#define SO_TYPE		0x1008
-
-/* Linux specific, keep the same. */
-#define SO_NO_CHECK	0x000b
-#define SO_PRIORITY	0x000c
-
-#define SO_BINDTODEVICE 0x000d
-
-#define SO_ATTACH_FILTER	0x001a
-#define SO_DETACH_FILTER        0x001b
-
-#define SO_PEERNAME		0x001c
-#define SO_TIMESTAMP		0x001d
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_PEERSEC		0x001e
-#define SO_PASSSEC		0x001f
-#define SO_TIMESTAMPNS		0x0021
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			0x0022
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		0x5001
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
-#define SO_SECURITY_ENCRYPTION_NETWORK		0x5004
-
-#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-sparc/sockios.h b/include/asm-sparc/sockios.h
deleted file mode 100644
index 990ea746486b..000000000000
--- a/include/asm-sparc/sockios.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_SPARC_SOCKIOS_H
-#define _ASM_SPARC_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* !(_ASM_SPARC_SOCKIOS_H) */
-
diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h
deleted file mode 100644
index de2249b267c6..000000000000
--- a/include/asm-sparc/spinlock.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/* spinlock.h: 32-bit Sparc spinlock support.
- *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __SPARC_SPINLOCK_H
-#define __SPARC_SPINLOCK_H
-
-#include <linux/threads.h>	/* For NR_CPUS */
-
-#ifndef __ASSEMBLY__
-
-#include <asm/psr.h>
-
-#define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0)
-
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-	__asm__ __volatile__(
-	"\n1:\n\t"
-	"ldstub	[%0], %%g2\n\t"
-	"orcc	%%g2, 0x0, %%g0\n\t"
-	"bne,a	2f\n\t"
-	" ldub	[%0], %%g2\n\t"
-	".subsection	2\n"
-	"2:\n\t"
-	"orcc	%%g2, 0x0, %%g0\n\t"
-	"bne,a	2b\n\t"
-	" ldub	[%0], %%g2\n\t"
-	"b,a	1b\n\t"
-	".previous\n"
-	: /* no outputs */
-	: "r" (lock)
-	: "g2", "memory", "cc");
-}
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-	unsigned int result;
-	__asm__ __volatile__("ldstub [%1], %0"
-			     : "=r" (result)
-			     : "r" (lock)
-			     : "memory");
-	return (result == 0);
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-	__asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory");
-}
-
-/* Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- *
- * XXX This might create some problems with my dual spinlock
- * XXX scheme, deadlocks etc. -DaveM
- *
- * Sort of like atomic_t's on Sparc, but even more clever.
- *
- *	------------------------------------
- *	| 24-bit counter           | wlock |  raw_rwlock_t
- *	------------------------------------
- *	 31                       8 7     0
- *
- * wlock signifies the one writer is in or somebody is updating
- * counter. For a writer, if he successfully acquires the wlock,
- * but counter is non-zero, he has to release the lock and wait,
- * till both counter and wlock are zero.
- *
- * Unfortunately this scheme limits us to ~16,000,000 cpus.
- */
-static inline void __read_lock(raw_rwlock_t *rw)
-{
-	register raw_rwlock_t *lp asm("g1");
-	lp = rw;
-	__asm__ __volatile__(
-	"mov	%%o7, %%g4\n\t"
-	"call	___rw_read_enter\n\t"
-	" ldstub	[%%g1 + 3], %%g2\n"
-	: /* no outputs */
-	: "r" (lp)
-	: "g2", "g4", "memory", "cc");
-}
-
-#define __raw_read_lock(lock) \
-do {	unsigned long flags; \
-	local_irq_save(flags); \
-	__read_lock(lock); \
-	local_irq_restore(flags); \
-} while(0)
-
-static inline void __read_unlock(raw_rwlock_t *rw)
-{
-	register raw_rwlock_t *lp asm("g1");
-	lp = rw;
-	__asm__ __volatile__(
-	"mov	%%o7, %%g4\n\t"
-	"call	___rw_read_exit\n\t"
-	" ldstub	[%%g1 + 3], %%g2\n"
-	: /* no outputs */
-	: "r" (lp)
-	: "g2", "g4", "memory", "cc");
-}
-
-#define __raw_read_unlock(lock) \
-do {	unsigned long flags; \
-	local_irq_save(flags); \
-	__read_unlock(lock); \
-	local_irq_restore(flags); \
-} while(0)
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
-	register raw_rwlock_t *lp asm("g1");
-	lp = rw;
-	__asm__ __volatile__(
-	"mov	%%o7, %%g4\n\t"
-	"call	___rw_write_enter\n\t"
-	" ldstub	[%%g1 + 3], %%g2\n"
-	: /* no outputs */
-	: "r" (lp)
-	: "g2", "g4", "memory", "cc");
-	*(volatile __u32 *)&lp->lock = ~0U;
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
-{
-	unsigned int val;
-
-	__asm__ __volatile__("ldstub [%1 + 3], %0"
-			     : "=r" (val)
-			     : "r" (&rw->lock)
-			     : "memory");
-
-	if (val == 0) {
-		val = rw->lock & ~0xff;
-		if (val)
-			((volatile u8*)&rw->lock)[3] = 0;
-		else
-			*(volatile u32*)&rw->lock = ~0U;
-	}
-
-	return (val == 0);
-}
-
-static inline int __read_trylock(raw_rwlock_t *rw)
-{
-	register raw_rwlock_t *lp asm("g1");
-	register int res asm("o0");
-	lp = rw;
-	__asm__ __volatile__(
-	"mov	%%o7, %%g4\n\t"
-	"call	___rw_read_try\n\t"
-	" ldstub	[%%g1 + 3], %%g2\n"
-	: "=r" (res)
-	: "r" (lp)
-	: "g2", "g4", "memory", "cc");
-	return res;
-}
-
-#define __raw_read_trylock(lock) \
-({	unsigned long flags; \
-	int res; \
-	local_irq_save(flags); \
-	res = __read_trylock(lock); \
-	local_irq_restore(flags); \
-	res; \
-})
-
-#define __raw_write_unlock(rw)	do { (rw)->lock = 0; } while(0)
-
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-
-#define _raw_spin_relax(lock)	cpu_relax()
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
-
-#define __raw_read_can_lock(rw) (!((rw)->lock & 0xff))
-#define __raw_write_can_lock(rw) (!(rw)->lock)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* __SPARC_SPINLOCK_H */
diff --git a/include/asm-sparc/spinlock_types.h b/include/asm-sparc/spinlock_types.h
deleted file mode 100644
index 0a0fb116c4ec..000000000000
--- a/include/asm-sparc/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __SPARC_SPINLOCK_TYPES_H
-#define __SPARC_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	unsigned char lock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
-
-#endif
diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h
deleted file mode 100644
index 2299e1d5d94c..000000000000
--- a/include/asm-sparc/stat.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _SPARC_STAT_H
-#define _SPARC_STAT_H
-
-#include <linux/types.h>
-
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-
-struct stat {
-	unsigned short	st_dev;
-	unsigned long	st_ino;
-	unsigned short	st_mode;
-	short		st_nlink;
-	unsigned short	st_uid;
-	unsigned short	st_gid;
-	unsigned short	st_rdev;
-	long		st_size;
-	long		st_atime;
-	unsigned long	st_atime_nsec;
-	long		st_mtime;
-	unsigned long	st_mtime_nsec;
-	long		st_ctime;
-	unsigned long	st_ctime_nsec;
-	long		st_blksize;
-	long		st_blocks;
-	unsigned long	__unused4[2];
-};
-
-#define STAT_HAVE_NSEC 1
-
-struct stat64 {
-	unsigned long long st_dev;
-
-	unsigned long long st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-
-	unsigned long long st_rdev;
-
-	unsigned char	__pad3[8];
-
-	long long	st_size;
-	unsigned int	st_blksize;
-
-	unsigned char	__pad4[8];
-	unsigned int	st_blocks;
-
-	unsigned int	st_atime;
-	unsigned int	st_atime_nsec;
-
-	unsigned int	st_mtime;
-	unsigned int	st_mtime_nsec;
-
-	unsigned int	st_ctime;
-	unsigned int	st_ctime_nsec;
-
-	unsigned int	__unused4;
-	unsigned int	__unused5;
-};
-
-#endif
diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h
deleted file mode 100644
index 304520fa8863..000000000000
--- a/include/asm-sparc/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC_STATFS_H
-#define _SPARC_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif
diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h
deleted file mode 100644
index 8d7c0dd4f299..000000000000
--- a/include/asm-sparc/string.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * string.h: External definitions for optimized assembly string
- *           routines for the Linux Kernel.
- *
- * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef __SPARC_STRING_H__
-#define __SPARC_STRING_H__
-
-#include <asm/page.h>
-
-/* Really, userland/ksyms should not see any of this stuff. */
-
-#ifdef __KERNEL__
-
-extern void __memmove(void *,const void *,__kernel_size_t);
-extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t);
-extern __kernel_size_t __memset(void *,int,__kernel_size_t);
-
-#ifndef EXPORT_SYMTAB_STROPS
-
-/* First the mem*() things. */
-#define __HAVE_ARCH_MEMMOVE
-#undef memmove
-#define memmove(_to, _from, _n) \
-({ \
-	void *_t = (_to); \
-	__memmove(_t, (_from), (_n)); \
-	_t; \
-})
-
-#define __HAVE_ARCH_MEMCPY
-
-static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n)
-{
-	extern void __copy_1page(void *, const void *);
-
-	if(n <= 32) {
-		__builtin_memcpy(to, from, n);
-	} else if (((unsigned int) to & 7) != 0) {
-		/* Destination is not aligned on the double-word boundary */
-		__memcpy(to, from, n);
-	} else {
-		switch(n) {
-		case PAGE_SIZE:
-			__copy_1page(to, from);
-			break;
-		default:
-			__memcpy(to, from, n);
-			break;
-		}
-	}
-	return to;
-}
-
-static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n)
-{
-	__memcpy(to, from, n);
-	return to;
-}
-
-#undef memcpy
-#define memcpy(t, f, n) \
-(__builtin_constant_p(n) ? \
- __constant_memcpy((t),(f),(n)) : \
- __nonconstant_memcpy((t),(f),(n)))
-
-#define __HAVE_ARCH_MEMSET
-
-static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count)
-{
-	extern void bzero_1page(void *);
-	extern __kernel_size_t __bzero(void *, __kernel_size_t);
-
-	if(!c) {
-		if(count == PAGE_SIZE)
-			bzero_1page(s);
-		else
-			__bzero(s, count);
-	} else {
-		__memset(s, c, count);
-	}
-	return s;
-}
-
-static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count)
-{
-	extern __kernel_size_t __bzero(void *, __kernel_size_t);
-
-	if(!c)
-		__bzero(s, count);
-	else
-		__memset(s, c, count);
-	return s;
-}
-
-static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count)
-{
-	__memset(s, c, count);
-	return s;
-}
-
-#undef memset
-#define memset(s, c, count) \
-(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \
-                            __constant_c_and_count_memset((s), (c), (count)) : \
-                            __constant_c_memset((s), (c), (count))) \
-                          : __nonconstant_memset((s), (c), (count)))
-
-#define __HAVE_ARCH_MEMSCAN
-
-#undef memscan
-#define memscan(__arg0, __char, __arg2)						\
-({										\
-	extern void *__memscan_zero(void *, size_t);				\
-	extern void *__memscan_generic(void *, int, size_t);			\
-	void *__retval, *__addr = (__arg0);					\
-	size_t __size = (__arg2);						\
-										\
-	if(__builtin_constant_p(__char) && !(__char))				\
-		__retval = __memscan_zero(__addr, __size);			\
-	else									\
-		__retval = __memscan_generic(__addr, (__char), __size);		\
-										\
-	__retval;								\
-})
-
-#define __HAVE_ARCH_MEMCMP
-extern int memcmp(const void *,const void *,__kernel_size_t);
-
-/* Now the str*() stuff... */
-#define __HAVE_ARCH_STRLEN
-extern __kernel_size_t strlen(const char *);
-
-#define __HAVE_ARCH_STRNCMP
-
-extern int __strncmp(const char *, const char *, __kernel_size_t);
-
-static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count)
-{
-	register int retval;
-	switch(count) {
-	case 0: return 0;
-	case 1: return (src[0] - dest[0]);
-	case 2: retval = (src[0] - dest[0]);
-		if(!retval && src[0])
-		  retval = (src[1] - dest[1]);
-		return retval;
-	case 3: retval = (src[0] - dest[0]);
-		if(!retval && src[0]) {
-		  retval = (src[1] - dest[1]);
-		  if(!retval && src[1])
-		    retval = (src[2] - dest[2]);
-		}
-		return retval;
-	case 4: retval = (src[0] - dest[0]);
-		if(!retval && src[0]) {
-		  retval = (src[1] - dest[1]);
-		  if(!retval && src[1]) {
-		    retval = (src[2] - dest[2]);
-		    if (!retval && src[2])
-		      retval = (src[3] - dest[3]);
-		  }
-		}
-		return retval;
-	case 5: retval = (src[0] - dest[0]);
-		if(!retval && src[0]) {
-		  retval = (src[1] - dest[1]);
-		  if(!retval && src[1]) {
-		    retval = (src[2] - dest[2]);
-		    if (!retval && src[2]) {
-		      retval = (src[3] - dest[3]);
-		      if (!retval && src[3])
-		        retval = (src[4] - dest[4]);
-		    }
-		  }
-		}
-		return retval;
-	default:
-		retval = (src[0] - dest[0]);
-		if(!retval && src[0]) {
-		  retval = (src[1] - dest[1]);
-		  if(!retval && src[1]) {
-		    retval = (src[2] - dest[2]);
-		    if(!retval && src[2])
-		      retval = __strncmp(src+3,dest+3,count-3);
-		  }
-		}
-		return retval;
-	}
-}
-
-#undef strncmp
-#define strncmp(__arg0, __arg1, __arg2)	\
-(__builtin_constant_p(__arg2) ?	\
- __constant_strncmp(__arg0, __arg1, __arg2) : \
- __strncmp(__arg0, __arg1, __arg2))
- 
-#endif /* !EXPORT_SYMTAB_STROPS */
-
-#endif /* __KERNEL__ */
-
-#endif /* !(__SPARC_STRING_H__) */
diff --git a/include/asm-sparc/sun4paddr.h b/include/asm-sparc/sun4paddr.h
deleted file mode 100644
index d52985f19f42..000000000000
--- a/include/asm-sparc/sun4paddr.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * sun4paddr.h:  Various physical addresses on sun4 machines
- *
- * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
- * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
- * 
- * Now supports more sun4's
- */
-
-#ifndef _SPARC_SUN4PADDR_H
-#define _SPARC_SUN4PADDR_H
-
-#define SUN4_IE_PHYSADDR		0xf5000000
-#define SUN4_UNUSED_PHYSADDR		0
-
-/* these work for me */
-#define SUN4_200_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_200_CLOCK_PHYSADDR		0xf3000000
-#define SUN4_200_BWTWO_PHYSADDR		0xfd000000
-#define SUN4_200_ETH_PHYSADDR		0xf6000000
-#define SUN4_200_SI_PHYSADDR		0xff200000
-
-/* these were here before */
-#define SUN4_300_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_300_CLOCK_PHYSADDR		0xf2000000
-#define SUN4_300_TIMER_PHYSADDR		0xef000000
-#define SUN4_300_ETH_PHYSADDR		0xf9000000
-#define SUN4_300_BWTWO_PHYSADDR		0xfb400000
-#define SUN4_300_DMA_PHYSADDR		0xfa001000
-#define SUN4_300_ESP_PHYSADDR		0xfa000000
-
-/* Are these right? */
-#define SUN4_400_MEMREG_PHYSADDR	0xf4000000
-#define SUN4_400_CLOCK_PHYSADDR		0xf2000000
-#define SUN4_400_TIMER_PHYSADDR		0xef000000
-#define SUN4_400_ETH_PHYSADDR		0xf9000000
-#define SUN4_400_BWTWO_PHYSADDR		0xfb400000
-#define SUN4_400_DMA_PHYSADDR		0xfa001000
-#define SUN4_400_ESP_PHYSADDR		0xfa000000
-
-/* 
-	these are the actual values set and used in the code. Unused items set 
-	to SUN_UNUSED_PHYSADDR 
- */
-
-extern int sun4_memreg_physaddr; /* memory register (ecc?) */
-extern int sun4_clock_physaddr;  /* system clock */
-extern int sun4_timer_physaddr;  /* timer, where applicable */
-extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
-extern int sun4_si_physaddr;     /* sun3 scsi adapter */
-extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
-extern int sun4_dma_physaddr;    /* scsi dma */
-extern int sun4_esp_physaddr;    /* esp scsi */
-extern int sun4_ie_physaddr;     /* interrupt enable */
-
-#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/include/asm-sparc/sun4prom.h b/include/asm-sparc/sun4prom.h
deleted file mode 100644
index 9c8b4cbf629a..000000000000
--- a/include/asm-sparc/sun4prom.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
- *               so most of these are just placeholders.
- */
-
-#ifndef _SUN4PROM_H_
-#define _SUN4PROM_H_
-
-/*
- * Although this looks similar to an romvec for a OpenProm machine, it is 
- * actually closer to what was used in the Sun2 and Sun3.
- *
- * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
- * 
- * Many of the function prototypes are guesses.  Some are certainly wrong.
- * Use with care.
- */
-
-typedef struct {
-	char		*initSP;		/* Initial system stack ptr */
-	void		(*startmon)(void);	/* Initial PC for hardware */
-	int		*diagberr;		/* Bus err handler for diags */
-	struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
- 	unsigned int	*memorysize;		/* Usable memory in bytes */
-	unsigned char	(*getchar)(void);	/* Get char from input device */ 
-	void		(*putchar)(char);	/* Put char to output device */
-	int		(*mayget)(void);	/* Maybe get char, or -1 */
-	int		(*mayput)(int);		/* Maybe put char, or -1 */
-	unsigned char	*echo;			/* Should getchar echo? */
-	unsigned char	*insource;		/* Input source selector */
-	unsigned char	*outsink;		/* Output sink selector */
-	int		(*getkey)(void);	/* Get next key if one exists */
-	void		(*initgetkey)(void);	/* Initialize get key */
-	unsigned int	*translation;		/* Kbd translation selector */
-	unsigned char	*keybid;		/* Keyboard ID byte */
-	int		*screen_x;		/* V2: Screen x pos (r/o) */
-	int		*screen_y;		/* V2: Screen y pos (r/o) */
-	struct keybuf	*keybuf;		/* Up/down keycode buffer */
-	char		*monid;			/* Monitor version ID */
-	void		(*fbwritechar)(char);	/* Write a character to FB */
-	int		*fbAddr;		/* Address of frame buffer */
-	char		**font;			/* Font table for FB */
-	void		(*fbwritestr)(char *);	/* Write string to FB */
-	void		(*reboot)(char *);	/* e.g. reboot("sd()vmlinux") */
-	unsigned char	*linebuf;		/* The line input buffer */
-	unsigned char	**lineptr;		/* Cur pointer into linebuf */
-	int		*linesize;		/* length of line in linebuf */
-	void		(*getline)(char *);	/* Get line from user */
-	unsigned char	(*getnextchar)(void);	/* Get next char from linebuf */
-	unsigned char	(*peeknextchar)(void);	/* Peek at next char */
-	int		*fbthere;		/* =1 if frame buffer there */
-	int		(*getnum)(void);	/* Grab hex num from line */
-	int		(*printf)(char *, ...);	/* See prom_printf() instead */ 
-	void		(*printhex)(int);	/* Format N digits in hex */
-	unsigned char	*leds;			/* RAM copy of LED register */
-	void		(*setLEDs)(unsigned char *);	/* Sets LED's and RAM copy */
-	void		(*NMIaddr)(void *);	/* Addr for level 7 vector */
-	void		(*abortentry)(void);	/* Entry for keyboard abort */
-	int		*nmiclock;		/* Counts up in msec */
-	int		*FBtype;		/* Frame buffer type */
- 	unsigned int	romvecversion;		/* Version number for this romvec */
-	struct globram  *globram;		/* monitor global variables ??? */
-	void *		kbdaddr;		/* Addr of keyboard in use */
-	int		*keyrinit;		/* ms before kbd repeat */
-	unsigned char	*keyrtick; 		/* ms between repetitions */
-	unsigned int	*memoryavail;		/* V1: Main mem usable size */
-	long		*resetaddr;		/* where to jump on a reset */
-	long		*resetmap;		/* pgmap entry for resetaddr */
-	void		(*exittomon)(void);	/* Exit from user program */
-	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
-	void		(*setcxsegmap)(int ctxt, char *va, int pmeg);	/* Set seg in any context */
-	void		(**vector_cmd)(void *);	/* V2: Handler for 'v' cmd */
-	unsigned long	*expectedtrapsig;	/* V3: Location of the expected trap signal */
-	unsigned long	*trapvectorbasetable;	/* V3: Address of the trap vector table */
-	int		unused1;
-	int		unused2;
-	int		unused3;
-	int		unused4;
-} linux_sun4_romvec;
-
-extern linux_sun4_romvec *sun4_romvec;
-
-#endif /* _SUN4PROM_H_ */
diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h
deleted file mode 100644
index 92ee1a8ff3a2..000000000000
--- a/include/asm-sparc/sunbpp.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * include/asm-sparc/sunbpp.h
- */
-
-#ifndef _ASM_SPARC_SUNBPP_H
-#define _ASM_SPARC_SUNBPP_H
-
-struct bpp_regs {
-  /* DMA registers */
-  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
-  __volatile__ __u32 p_addr;		/* Address Register */
-  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
-  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
-  /* Parallel Port registers */
-  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
-  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
-  __volatile__ __u8 p_dr;		/* Parallel Data Register */
-  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
-  __volatile__ __u8 p_or;		/* Output Register */
-  __volatile__ __u8 p_ir;		/* Input Register */
-  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
-};
-
-/* P_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
-#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
-#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
-
-/* P_OCR. */
-#define P_OCR_MEM_CLR   0x8000
-#define P_OCR_DATA_SRC  0x4000      /* )                  */
-#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
-#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
-#define P_OCR_ACK_DSEL  0x0800      /* )                  */
-#define P_OCR_EN_DIAG   0x0400
-#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
-#define P_OCR_ACK_OP    0x0100      /* Ack operation */
-#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
-
-/* P_TCR */
-#define P_TCR_DIR       0x08
-#define P_TCR_BUSY      0x04
-#define P_TCR_ACK       0x02
-#define P_TCR_DS        0x01        /* Strobe */
-
-/* P_OR */
-#define P_OR_V3         0x20        /* )                 */
-#define P_OR_V2         0x10        /* ) on Zebra only   */
-#define P_OR_V1         0x08        /* )                 */
-#define P_OR_INIT       0x04
-#define P_OR_AFXN       0x02        /* Auto Feed */
-#define P_OR_SLCT_IN    0x01
-
-/* P_IR */
-#define P_IR_PE         0x04
-#define P_IR_SLCT       0x02
-#define P_IR_ERR        0x01
-
-/* P_ICR */
-#define P_DS_IRQ        0x8000      /* RW1  */
-#define P_ACK_IRQ       0x4000      /* RW1  */
-#define P_BUSY_IRQ      0x2000      /* RW1  */
-#define P_PE_IRQ        0x1000      /* RW1  */
-#define P_SLCT_IRQ      0x0800      /* RW1  */
-#define P_ERR_IRQ       0x0400      /* RW1  */
-#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
-#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
-#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
-#define P_BUSY_IRQ_EN   0x0040      /* RW   */
-#define P_PE_IRP        0x0020      /* RW   1= rising edge */
-#define P_PE_IRQ_EN     0x0010      /* RW   */
-#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
-#define P_SLCT_IRQ_EN   0x0004      /* RW   */
-#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
-#define P_ERR_IRQ_EN    0x0001      /* RW   */
-
-#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/include/asm-sparc/swift.h b/include/asm-sparc/swift.h
deleted file mode 100644
index e535061bf755..000000000000
--- a/include/asm-sparc/swift.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* swift.h: Specific definitions for the _broken_ Swift SRMMU
- *          MMU module.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_SWIFT_H
-#define _SPARC_SWIFT_H
-
-/* Swift is so brain damaged, here is the mmu control register. */
-#define SWIFT_ST       0x00800000   /* SW tablewalk enable */
-#define SWIFT_WP       0x00400000   /* Watchpoint enable   */
-
-/* Branch folding (buggy, disable on production systems!)  */
-#define SWIFT_BF       0x00200000
-#define SWIFT_PMC      0x00180000   /* Page mode control   */
-#define SWIFT_PE       0x00040000   /* Parity enable       */
-#define SWIFT_PC       0x00020000   /* Parity control      */
-#define SWIFT_AP       0x00010000   /* Graphics page mode control (TCX/SX) */
-#define SWIFT_AC       0x00008000   /* Alternate Cacheability (see viking.h) */
-#define SWIFT_BM       0x00004000   /* Boot mode */
-#define SWIFT_RC       0x00003c00   /* DRAM refresh control */
-#define SWIFT_IE       0x00000200   /* Instruction cache enable */
-#define SWIFT_DE       0x00000100   /* Data cache enable */
-#define SWIFT_SA       0x00000080   /* Store Allocate */
-#define SWIFT_NF       0x00000002   /* No fault mode */
-#define SWIFT_EN       0x00000001   /* MMU enable */
-
-/* Bits [13:5] select one of 512 instruction cache tags */
-static inline void swift_inv_insn_tag(unsigned long addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
-			     : "memory");
-}
-
-/* Bits [12:4] select one of 512 data cache tags */
-static inline void swift_inv_data_tag(unsigned long addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
-			     : "memory");
-}
-
-static inline void swift_flush_dcache(void)
-{
-	unsigned long addr;
-
-	for (addr = 0; addr < 0x2000; addr += 0x10)
-		swift_inv_data_tag(addr);
-}
-
-static inline void swift_flush_icache(void)
-{
-	unsigned long addr;
-
-	for (addr = 0; addr < 0x4000; addr += 0x20)
-		swift_inv_insn_tag(addr);
-}
-
-static inline void swift_idflash_clear(void)
-{
-	unsigned long addr;
-
-	for (addr = 0; addr < 0x2000; addr += 0x10) {
-		swift_inv_insn_tag(addr<<1);
-		swift_inv_data_tag(addr);
-	}
-}
-
-/* Swift is so broken, it isn't even safe to use the following. */
-static inline void swift_flush_page(unsigned long page)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
-			     : "memory");
-}
-
-static inline void swift_flush_segment(unsigned long addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (addr), "i" (ASI_M_FLUSH_SEG)
-			     : "memory");
-}
-
-static inline void swift_flush_region(unsigned long addr)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (addr), "i" (ASI_M_FLUSH_REGION)
-			     : "memory");
-}
-
-static inline void swift_flush_context(void)
-{
-	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
-			     : /* no outputs */
-			     : "i" (ASI_M_FLUSH_CTX)
-			     : "memory");
-}
-
-#endif /* !(_SPARC_SWIFT_H) */
diff --git a/include/asm-sparc/sysen.h b/include/asm-sparc/sysen.h
deleted file mode 100644
index 6af34abde6e7..000000000000
--- a/include/asm-sparc/sysen.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * sysen.h:  Bit fields within the "System Enable" register accessed via
- *           the ASI_CONTROL address space at address AC_SYSENABLE.
- *
- * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_SYSEN_H
-#define _SPARC_SYSEN_H
-
-#define SENABLE_DVMA   0x20   /* enable dvma transfers */
-#define SENABLE_CACHE  0x10   /* enable VAC cache */
-#define SENABLE_RESET  0x04   /* reset whole machine, danger Will Robinson */
-
-#endif /* _SPARC_SYSEN_H */
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h
deleted file mode 100644
index b4b024445fc9..000000000000
--- a/include/asm-sparc/system.h
+++ /dev/null
@@ -1,288 +0,0 @@
-#ifndef __SPARC_SYSTEM_H
-#define __SPARC_SYSTEM_H
-
-#include <linux/kernel.h>
-#include <linux/threads.h>	/* NR_CPUS */
-#include <linux/thread_info.h>
-
-#include <asm/page.h>
-#include <asm/psr.h>
-#include <asm/ptrace.h>
-#include <asm/btfixup.h>
-#include <asm/smp.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/irqflags.h>
-
-/*
- * Sparc (general) CPU types
- */
-enum sparc_cpu {
-  sun4        = 0x00,
-  sun4c       = 0x01,
-  sun4m       = 0x02,
-  sun4d       = 0x03,
-  sun4e       = 0x04,
-  sun4u       = 0x05, /* V8 ploos ploos */
-  sun_unknown = 0x06,
-  ap1000      = 0x07, /* almost a sun4m */
-};
-
-/* Really, userland should not be looking at any of this... */
-#ifdef __KERNEL__
-
-extern enum sparc_cpu sparc_cpu_model;
-
-#ifndef CONFIG_SUN4
-#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
-#define ARCH_SUN4 0
-#else
-#define ARCH_SUN4C_SUN4 1
-#define ARCH_SUN4 1
-#endif
-
-#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
-
-extern char reboot_command[];
-
-extern struct thread_info *current_set[NR_CPUS];
-
-extern unsigned long empty_bad_page;
-extern unsigned long empty_bad_page_table;
-extern unsigned long empty_zero_page;
-
-extern void sun_do_break(void);
-extern int serial_console;
-extern int stop_a_enabled;
-
-static inline int con_is_present(void)
-{
-	return serial_console ? 0 : 1;
-}
-
-/* When a context switch happens we must flush all user windows so that
- * the windows of the current process are flushed onto its stack. This
- * way the windows are all clean for the next process and the stack
- * frames are up to date.
- */
-extern void flush_user_windows(void);
-extern void kill_user_windows(void);
-extern void synchronize_user_stack(void);
-extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
-		   void *fpqueue, unsigned long *fpqdepth);
-
-#ifdef CONFIG_SMP
-#define SWITCH_ENTER(prv) \
-	do {			\
-	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
-		put_psr(get_psr() | PSR_EF); \
-		fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
-		       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
-		clear_tsk_thread_flag(prv, TIF_USEDFPU); \
-		(prv)->thread.kregs->psr &= ~PSR_EF; \
-	} \
-	} while(0)
-
-#define SWITCH_DO_LAZY_FPU(next)	/* */
-#else
-#define SWITCH_ENTER(prv)		/* */
-#define SWITCH_DO_LAZY_FPU(nxt)	\
-	do {			\
-	if (last_task_used_math != (nxt))		\
-		(nxt)->thread.kregs->psr&=~PSR_EF;	\
-	} while(0)
-#endif
-
-extern void flushw_all(void);
-
-/*
- * Flush windows so that the VM switch which follows
- * would not pull the stack from under us.
- *
- * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
- * XXX WTF is the above comment? Found in late teen 2.4.x.
- */
-#define prepare_arch_switch(next) do { \
-	__asm__ __volatile__( \
-	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
-	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
-	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
-	"save %sp, -0x40, %sp\n\t" \
-	"restore; restore; restore; restore; restore; restore; restore"); \
-} while(0)
-
-	/* Much care has gone into this code, do not touch it.
-	 *
-	 * We need to loadup regs l0/l1 for the newly forked child
-	 * case because the trap return path relies on those registers
-	 * holding certain values, gcc is told that they are clobbered.
-	 * Gcc needs registers for 3 values in and 1 value out, so we
-	 * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
-	 *
-	 * Hey Dave, that do not touch sign is too much of an incentive
-	 * - Anton & Pete
-	 */
-#define switch_to(prev, next, last) do {						\
-	SWITCH_ENTER(prev);								\
-	SWITCH_DO_LAZY_FPU(next);							\
-	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);			\
-	__asm__ __volatile__(								\
-	"sethi	%%hi(here - 0x8), %%o7\n\t"						\
-	"mov	%%g6, %%g3\n\t"								\
-	"or	%%o7, %%lo(here - 0x8), %%o7\n\t"					\
-	"rd	%%psr, %%g4\n\t"							\
-	"std	%%sp, [%%g6 + %4]\n\t"							\
-	"rd	%%wim, %%g5\n\t"							\
-	"wr	%%g4, 0x20, %%psr\n\t"							\
-	"nop\n\t"									\
-	"std	%%g4, [%%g6 + %3]\n\t"							\
-	"ldd	[%2 + %3], %%g4\n\t"							\
-	"mov	%2, %%g6\n\t"								\
-	".globl	patchme_store_new_current\n"						\
-"patchme_store_new_current:\n\t"							\
-	"st	%2, [%1]\n\t"								\
-	"wr	%%g4, 0x20, %%psr\n\t"							\
-	"nop\n\t"									\
-	"nop\n\t"									\
-	"nop\n\t"	/* LEON needs all 3 nops: load to %sp depends on CWP. */		\
-	"ldd	[%%g6 + %4], %%sp\n\t"							\
-	"wr	%%g5, 0x0, %%wim\n\t"							\
-	"ldd	[%%sp + 0x00], %%l0\n\t"						\
-	"ldd	[%%sp + 0x38], %%i6\n\t"						\
-	"wr	%%g4, 0x0, %%psr\n\t"							\
-	"nop\n\t"									\
-	"nop\n\t"									\
-	"jmpl	%%o7 + 0x8, %%g0\n\t"							\
-	" ld	[%%g3 + %5], %0\n\t"							\
-	"here:\n"									\
-        : "=&r" (last)									\
-        : "r" (&(current_set[hard_smp_processor_id()])),	\
-	  "r" (task_thread_info(next)),				\
-	  "i" (TI_KPSR),					\
-	  "i" (TI_KSP),						\
-	  "i" (TI_TASK)						\
-	:       "g1", "g2", "g3", "g4", "g5",       "g7",	\
-	  "l0", "l1",       "l3", "l4", "l5", "l6", "l7",	\
-	  "i0", "i1", "i2", "i3", "i4", "i5",			\
-	  "o0", "o1", "o2", "o3",                   "o7");	\
-	} while(0)
-
-/* XXX Change this if we ever use a PSO mode kernel. */
-#define mb()	__asm__ __volatile__ ("" : : : "memory")
-#define rmb()	mb()
-#define wmb()	mb()
-#define read_barrier_depends()	do { } while(0)
-#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
-#define smp_mb()	__asm__ __volatile__("":::"memory")
-#define smp_rmb()	__asm__ __volatile__("":::"memory")
-#define smp_wmb()	__asm__ __volatile__("":::"memory")
-#define smp_read_barrier_depends()	do { } while(0)
-
-#define nop() __asm__ __volatile__ ("nop")
-
-/* This has special calling conventions */
-#ifndef CONFIG_SMP
-BTFIXUPDEF_CALL(void, ___xchg32, void)
-#endif
-
-static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
-{
-#ifdef CONFIG_SMP
-	__asm__ __volatile__("swap [%2], %0"
-			     : "=&r" (val)
-			     : "0" (val), "r" (m)
-			     : "memory");
-	return val;
-#else
-	register unsigned long *ptr asm("g1");
-	register unsigned long ret asm("g2");
-
-	ptr = (unsigned long *) m;
-	ret = val;
-
-	/* Note: this is magic and the nop there is
-	   really needed. */
-	__asm__ __volatile__(
-	"mov	%%o7, %%g4\n\t"
-	"call	___f____xchg32\n\t"
-	" nop\n\t"
-	: "=&r" (ret)
-	: "0" (ret), "r" (ptr)
-	: "g3", "g4", "g7", "memory", "cc");
-
-	return ret;
-#endif
-}
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-extern void __xchg_called_with_bad_pointer(void);
-
-static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
-{
-	switch (size) {
-	case 4:
-		return xchg_u32(ptr, x);
-	};
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-/* Emulate cmpxchg() the same way we emulate atomics,
- * by hashing the object address and indexing into an array
- * of spinlocks to get a bit of performance...
- *
- * See arch/sparc/lib/atomic32.c for implementation.
- *
- * Cribbed from <asm-parisc/atomic.h>
- */
-#define __HAVE_ARCH_CMPXCHG	1
-
-/* bug catcher for when unsupported size is used - won't link */
-extern void __cmpxchg_called_with_bad_pointer(void);
-/* we only need to support cmpxchg of a u32 on sparc */
-extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_);
-
-/* don't worry...optimizer will get rid of most of this */
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
-{
-	switch (size) {
-	case 4:
-		return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_);
-	default:
-		__cmpxchg_called_with_bad_pointer();
-		break;
-	}
-	return old;
-}
-
-#define cmpxchg(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) _o_ = (o);					\
-	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
-			(unsigned long)_n_, sizeof(*(ptr)));		\
-})
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASSEMBLY__ */
-
-#define arch_align_stack(x) (x)
-
-#endif /* !(__SPARC_SYSTEM_H) */
diff --git a/include/asm-sparc/termbits.h b/include/asm-sparc/termbits.h
deleted file mode 100644
index 90cf2210118b..000000000000
--- a/include/asm-sparc/termbits.h
+++ /dev/null
@@ -1,261 +0,0 @@
-#ifndef _SPARC_TERMBITS_H
-#define _SPARC_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char   cc_t;
-typedef unsigned int    speed_t;
-typedef unsigned long   tcflag_t;
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#define NCCS 17
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-#ifdef __KERNEL__
-#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
-	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
-#endif
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t _x_cc[2];                  /* padding to match ktermios */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR    0
-#define VQUIT    1
-#define VERASE   2
-#define VKILL    3
-#define VEOF     4
-#define VEOL     5
-#define VEOL2    6
-#define VSWTC    7
-#define VSTART   8
-#define VSTOP    9
-
-
-
-#define VSUSP    10
-#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE  14
-#define VLNEXT   15
-
-/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
- * shared with eof/eol
- */
-#ifdef __KERNEL__
-#define VMIN     16
-#define VTIME    17
-#else
-#define VMIN     VEOF
-#define VTIME    VEOL
-#endif
-
-/* c_iflag bits */
-#define IGNBRK	0x00000001
-#define BRKINT	0x00000002
-#define IGNPAR	0x00000004
-#define PARMRK	0x00000008
-#define INPCK	0x00000010
-#define ISTRIP	0x00000020
-#define INLCR	0x00000040
-#define IGNCR	0x00000080
-#define ICRNL	0x00000100
-#define IUCLC	0x00000200
-#define IXON	0x00000400
-#define IXANY	0x00000800
-#define IXOFF	0x00001000
-#define IMAXBEL	0x00002000
-#define IUTF8   0x00004000
-
-/* c_oflag bits */
-#define OPOST	0x00000001
-#define OLCUC	0x00000002
-#define ONLCR	0x00000004
-#define OCRNL	0x00000008
-#define ONOCR	0x00000010
-#define ONLRET	0x00000020
-#define OFILL	0x00000040
-#define OFDEL	0x00000080
-#define NLDLY	0x00000100
-#define   NL0	0x00000000
-#define   NL1	0x00000100
-#define CRDLY	0x00000600
-#define   CR0	0x00000000
-#define   CR1	0x00000200
-#define   CR2	0x00000400
-#define   CR3	0x00000600
-#define TABDLY	0x00001800
-#define   TAB0	0x00000000
-#define   TAB1	0x00000800
-#define   TAB2	0x00001000
-#define   TAB3	0x00001800
-#define   XTABS	0x00001800
-#define BSDLY	0x00002000
-#define   BS0	0x00000000
-#define   BS1	0x00002000
-#define VTDLY	0x00004000
-#define   VT0	0x00000000
-#define   VT1	0x00004000
-#define FFDLY	0x00008000
-#define   FF0	0x00000000
-#define   FF1	0x00008000
-#define PAGEOUT 0x00010000  /* SUNOS specific */
-#define WRAP    0x00020000  /* SUNOS specific */
-
-/* c_cflag bit meaning */
-#define CBAUD	  0x0000100f
-#define  B0	  0x00000000   /* hang up */
-#define  B50	  0x00000001
-#define  B75	  0x00000002
-#define  B110	  0x00000003
-#define  B134	  0x00000004
-#define  B150	  0x00000005
-#define  B200	  0x00000006
-#define  B300	  0x00000007
-#define  B600	  0x00000008
-#define  B1200	  0x00000009
-#define  B1800	  0x0000000a
-#define  B2400	  0x0000000b
-#define  B4800	  0x0000000c
-#define  B9600	  0x0000000d
-#define  B19200	  0x0000000e
-#define  B38400	  0x0000000f
-#define EXTA      B19200
-#define EXTB      B38400
-#define  CSIZE    0x00000030
-#define   CS5	  0x00000000
-#define   CS6	  0x00000010
-#define   CS7	  0x00000020
-#define   CS8	  0x00000030
-#define CSTOPB	  0x00000040
-#define CREAD	  0x00000080
-#define PARENB	  0x00000100
-#define PARODD	  0x00000200
-#define HUPCL	  0x00000400
-#define CLOCAL	  0x00000800
-#define CBAUDEX   0x00001000
-/* We'll never see these speeds with the Zilogs, but for completeness... */
-#define  BOTHER   0x00001000
-#define  B57600   0x00001001
-#define  B115200  0x00001002
-#define  B230400  0x00001003
-#define  B460800  0x00001004
-/* This is what we can do with the Zilogs. */
-#define  B76800   0x00001005
-/* This is what we can do with the SAB82532. */
-#define  B153600  0x00001006
-#define  B307200  0x00001007
-#define  B614400  0x00001008
-#define  B921600  0x00001009
-/* And these are the rest... */
-#define  B500000  0x0000100a
-#define  B576000  0x0000100b
-#define B1000000  0x0000100c
-#define B1152000  0x0000100d
-#define B1500000  0x0000100e
-#define B2000000  0x0000100f
-/* These have totally bogus values and nobody uses them
-   so far. Later on we'd have to use say 0x10000x and
-   adjust CBAUD constant and drivers accordingly.
-#define B2500000  0x00001010
-#define B3000000  0x00001011
-#define B3500000  0x00001012
-#define B4000000  0x00001013  */
-#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
-#define CMSPAR	  0x40000000  /* mark or space (stick) parity */
-#define CRTSCTS	  0x80000000  /* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0x00000001
-#define ICANON	0x00000002
-#define XCASE	0x00000004
-#define ECHO	0x00000008
-#define ECHOE	0x00000010
-#define ECHOK	0x00000020
-#define ECHONL	0x00000040
-#define NOFLSH	0x00000080
-#define TOSTOP	0x00000100
-#define ECHOCTL	0x00000200
-#define ECHOPRT	0x00000400
-#define ECHOKE	0x00000800
-#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
-#define FLUSHO	0x00002000
-#define PENDIN	0x00004000
-#define IEXTEN	0x00008000
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* !(_SPARC_TERMBITS_H) */
diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h
deleted file mode 100644
index f7b4409c35ff..000000000000
--- a/include/asm-sparc/termios.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef _SPARC_TERMIOS_H
-#define _SPARC_TERMIOS_H
-
-#include <asm/ioctls.h>
-#include <asm/termbits.h>
-
-#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
-struct sgttyb {
-	char	sg_ispeed;
-	char	sg_ospeed;
-	char	sg_erase;
-	char	sg_kill;
-	short	sg_flags;
-};
-
-struct tchars {
-	char	t_intrc;
-	char	t_quitc;
-	char	t_startc;
-	char	t_stopc;
-	char	t_eofc;
-	char	t_brkc;
-};
-
-struct ltchars {
-	char	t_suspc;
-	char	t_dsuspc;
-	char	t_rprntc;
-	char	t_flushc;
-	char	t_werasc;
-	char	t_lnextc;
-};
-#endif /* __KERNEL__ */
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#ifdef __KERNEL__
-#include <linux/module.h>
-
-/*
- * c_cc characters in the termio structure.  Oh, how I love being
- * backwardly compatible.  Notice that character 4 and 5 are
- * interpreted differently depending on whether ICANON is set in
- * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
- * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
- * is compatible with sysV)...
- */
-#define _VMIN	4
-#define _VTIME	5
-
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		eol=\0		eol2=\0		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		dsusp=^Y
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	vmin=\1         vtime=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	unsigned short tmp; \
-	get_user(tmp, &(termio)->c_iflag); \
-	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
-	get_user(tmp, &(termio)->c_oflag); \
-	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
-	get_user(tmp, &(termio)->c_cflag); \
-	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
-	get_user(tmp, &(termio)->c_lflag); \
-	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-	0; \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- *
- * Note the "fun" _VMIN overloading.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-	if (!((termios)->c_lflag & ICANON)) { \
-		put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
-		put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
-	} \
-	0; \
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-({ \
-	int err; \
-	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
-	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
-	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
-	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
-	err |= get_user((k)->c_line,  &(u)->c_line); \
-	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
-	if ((k)->c_lflag & ICANON) { \
-		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} else { \
-		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} \
-	err |= get_user((k)->c_ispeed,  &(u)->c_ispeed); \
-	err |= get_user((k)->c_ospeed,  &(u)->c_ospeed); \
-	err; \
-})
-
-#define kernel_termios_to_user_termios(u, k) \
-({ \
-	int err; \
-	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
-	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
-	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
-	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
-	err |= put_user((k)->c_line, &(u)->c_line); \
-	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
-	if (!((k)->c_lflag & ICANON)) { \
-		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} else { \
-		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} \
-	err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \
-	err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \
-	err; \
-})
-
-#define user_termios_to_kernel_termios_1(k, u) \
-({ \
-	get_user((k)->c_iflag, &(u)->c_iflag); \
-	get_user((k)->c_oflag, &(u)->c_oflag); \
-	get_user((k)->c_cflag, &(u)->c_cflag); \
-	get_user((k)->c_lflag, &(u)->c_lflag); \
-	get_user((k)->c_line,  &(u)->c_line); \
-	copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
-	if ((k)->c_lflag & ICANON) { \
-		get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} else { \
-		get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} \
-	0; \
-})
-
-#define kernel_termios_to_user_termios_1(u, k) \
-({ \
-	put_user((k)->c_iflag, &(u)->c_iflag); \
-	put_user((k)->c_oflag, &(u)->c_oflag); \
-	put_user((k)->c_cflag, &(u)->c_cflag); \
-	put_user((k)->c_lflag, &(u)->c_lflag); \
-	put_user((k)->c_line, &(u)->c_line); \
-	copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
-	if (!((k)->c_lflag & ICANON)) { \
-		put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} else { \
-		put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} \
-	0; \
-})
-
-#endif	/* __KERNEL__ */
-
-#endif /* _SPARC_TERMIOS_H */
diff --git a/include/asm-sparc/thread_info.h b/include/asm-sparc/thread_info.h
deleted file mode 100644
index 91b9f5888c85..000000000000
--- a/include/asm-sparc/thread_info.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * thread_info.h: sparc low-level thread information
- * adapted from the ppc version by Pete Zaitcev, which was
- * adapted from the i386 version by Paul Mackerras
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-#include <asm/btfixup.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Low level task data.
- *
- * If you change this, change the TI_* offsets below to match.
- */
-#define NSWINS 8
-struct thread_info {
-	unsigned long		uwinmask;
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	int			cpu;		/* cpu we're on */
-	int			preempt_count;	/* 0 => preemptable,
-						   <0 => BUG */
-	int			softirq_count;
-	int			hardirq_count;
-
-	/* Context switch saved kernel state. */
-	unsigned long ksp;	/* ... ksp __attribute__ ((aligned (8))); */
-	unsigned long kpc;
-	unsigned long kpsr;
-	unsigned long kwim;
-
-	/* A place to store user windows and stack pointers
-	 * when the stack needs inspection.
-	 */
-	struct reg_window	reg_window[NSWINS];	/* align for ldd! */
-	unsigned long		rwbuf_stkptrs[NSWINS];
-	unsigned long		w_saved;
-
-	struct restart_block	restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#define INIT_THREAD_INFO(tsk)				\
-{							\
-	.uwinmask	=	0,			\
-	.task		=	&tsk,			\
-	.exec_domain	=	&default_exec_domain,	\
-	.flags		=	0,			\
-	.cpu		=	0,			\
-	.preempt_count	=	1,			\
-	.restart_block	= {				\
-		.fn	=	do_no_restart_syscall,	\
-	},						\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-register struct thread_info *current_thread_info_reg asm("g6");
-#define current_thread_info()   (current_thread_info_reg)
-
-/*
- * thread information allocation
- */
-#if PAGE_SHIFT == 13
-#define THREAD_INFO_ORDER  0
-#else /* PAGE_SHIFT */
-#define THREAD_INFO_ORDER  1
-#endif
-
-BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
-#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
-
-BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
-#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Size of kernel stack for each process.
- * Observe the order of get_free_pages() in alloc_thread_info().
- * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
- */
-#define THREAD_SIZE		8192
-
-/*
- * Offsets in thread_info structure, used in assembly code
- * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
- */
-#define TI_UWINMASK	0x00	/* uwinmask */
-#define TI_TASK		0x04
-#define TI_EXECDOMAIN	0x08	/* exec_domain */
-#define TI_FLAGS	0x0c
-#define TI_CPU		0x10
-#define TI_PREEMPT	0x14	/* preempt_count */
-#define TI_SOFTIRQ	0x18	/* softirq_count */
-#define TI_HARDIRQ	0x1c	/* hardirq_count */
-#define TI_KSP		0x20	/* ksp */
-#define TI_KPC		0x24	/* kpc (ldd'ed with kpc) */
-#define TI_KPSR		0x28	/* kpsr */
-#define TI_KWIM		0x2c	/* kwim (ldd'ed with kpsr) */
-#define TI_REG_WINDOW	0x30
-#define TI_RWIN_SPTRS	0x230
-#define TI_W_SAVED	0x250
-/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
-
-#define PREEMPT_ACTIVE		0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-/* flag bit 1 is available */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_RESTORE_SIGMASK	4	/* restore signal mask in do_signal() */
-#define TIF_USEDFPU		8	/* FPU was used by this task
-					 * this quantum (SMP) */
-#define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
-					 * TIF_NEED_RESCHED */
-#define TIF_MEMDIE		10
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h
deleted file mode 100644
index d909565f9410..000000000000
--- a/include/asm-sparc/timer.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * timer.h:  Definitions for the timer chips on the Sparc.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-
-#ifndef _SPARC_TIMER_H
-#define _SPARC_TIMER_H
-
-#include <asm/system.h>  /* For SUN4M_NCPUS */
-#include <asm/sun4paddr.h>
-#include <asm/btfixup.h>
-
-/* Timer structures. The interrupt timer has two properties which
- * are the counter (which is handled in do_timer in sched.c) and the limit.
- * This limit is where the timer's counter 'wraps' around. Oddly enough,
- * the sun4c timer when it hits the limit wraps back to 1 and not zero
- * thus when calculating the value at which it will fire a microsecond you
- * must adjust by one.  Thanks SUN for designing such great hardware ;(
- */
-
-/* Note that I am only going to use the timer that interrupts at
- * Sparc IRQ 10.  There is another one available that can fire at
- * IRQ 14. Currently it is left untouched, we keep the PROM's limit
- * register value and let the prom take these interrupts.  This allows
- * L1-A to work.
- */
-
-struct sun4c_timer_info {
-  __volatile__ unsigned int cur_count10;
-  __volatile__ unsigned int timer_limit10;
-  __volatile__ unsigned int cur_count14;
-  __volatile__ unsigned int timer_limit14;
-};
-
-#define SUN4C_TIMER_PHYSADDR   0xf3000000
-#ifdef CONFIG_SUN4
-#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
-#else
-#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
-#endif
-
-/* A sun4m has two blocks of registers which are probably of the same
- * structure. LSI Logic's L64851 is told to _decrement_ from the limit
- * value. Aurora behaves similarly but its limit value is compacted in
- * other fashion (it's wider). Documented fields are defined here.
- */
-
-/* As with the interrupt register, we have two classes of timer registers
- * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
- * only level 14 ticks, master timer hits all cpus and is level 10.
- */
-
-#define SUN4M_PRM_CNT_L       0x80000000
-#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4m_timer_percpu_info {
-  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
-  __volatile__ unsigned int l14_cur_count;
-
-  /* This register appears to be write only and/or inaccessible
-   * on Uni-Processor sun4m machines.
-   */
-  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
-
-  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
-  __volatile__ unsigned char space[PAGE_SIZE - 16];
-};
-
-struct sun4m_timer_regs {
-	struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
-	volatile unsigned int l10_timer_limit;
-	volatile unsigned int l10_cur_count;
-
-	/* Again, this appears to be write only and/or inaccessible
-	 * on uni-processor sun4m machines.
-	 */
-	volatile unsigned int l10_limit_noclear;
-
-	/* This register too, it must be magic. */
-	volatile unsigned int foobar;
-
-	volatile unsigned int cfg;     /* equals zero at boot time... */
-};
-
-extern struct sun4m_timer_regs *sun4m_timers;
-
-#define SUN4D_PRM_CNT_L       0x80000000
-#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
-
-struct sun4d_timer_regs {
-	volatile unsigned int l10_timer_limit;
-	volatile unsigned int l10_cur_countx;
-	volatile unsigned int l10_limit_noclear;
-	volatile unsigned int ctrl;
-	volatile unsigned int l10_cur_count;
-};
-
-extern struct sun4d_timer_regs *sun4d_timers;
-
-extern __volatile__ unsigned int *master_l10_counter;
-extern __volatile__ unsigned int *master_l10_limit;
-
-/* FIXME: Make do_[gs]ettimeofday btfixup calls */
-BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
-#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
-
-#endif /* !(_SPARC_TIMER_H) */
diff --git a/include/asm-sparc/timex.h b/include/asm-sparc/timex.h
deleted file mode 100644
index 71b45c90ccae..000000000000
--- a/include/asm-sparc/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-sparc/timex.h
- *
- * sparc architecture timex specifications
- */
-#ifndef _ASMsparc_TIMEX_H
-#define _ASMsparc_TIMEX_H
-
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-
-/* XXX Maybe do something better at some point... -DaveM */
-typedef unsigned long cycles_t;
-#define get_cycles()	(0)
-
-#endif
diff --git a/include/asm-sparc/tlb.h b/include/asm-sparc/tlb.h
deleted file mode 100644
index 6d02d1ce53f3..000000000000
--- a/include/asm-sparc/tlb.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _SPARC_TLB_H
-#define _SPARC_TLB_H
-
-#define tlb_start_vma(tlb, vma) \
-do {								\
-	flush_cache_range(vma, vma->vm_start, vma->vm_end);	\
-} while (0)
-
-#define tlb_end_vma(tlb, vma) \
-do {								\
-	flush_tlb_range(vma, vma->vm_start, vma->vm_end);	\
-} while (0)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) \
-	do { } while (0)
-
-#define tlb_flush(tlb) \
-do {								\
-	flush_tlb_mm((tlb)->mm);				\
-} while (0)
-
-#include <asm-generic/tlb.h>
-
-#endif /* _SPARC_TLB_H */
diff --git a/include/asm-sparc/tlbflush.h b/include/asm-sparc/tlbflush.h
deleted file mode 100644
index b957e29d2ae1..000000000000
--- a/include/asm-sparc/tlbflush.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _SPARC_TLBFLUSH_H
-#define _SPARC_TLBFLUSH_H
-
-#include <linux/mm.h>
-// #include <asm/processor.h>
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb() flushes the current mm struct TLBs	XXX Exists?
- *  - flush_tlb_all() flushes all processes TLBs 
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- */
-
-#ifdef CONFIG_SMP
-
-BTFIXUPDEF_CALL(void, local_flush_tlb_all, void)
-BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *)
-BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
-BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long)
-
-#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)()
-#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm)
-#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end)
-#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr)
-
-extern void smp_flush_tlb_all(void);
-extern void smp_flush_tlb_mm(struct mm_struct *mm);
-extern void smp_flush_tlb_range(struct vm_area_struct *vma,
-				  unsigned long start,
-				  unsigned long end);
-extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page);
-
-#endif /* CONFIG_SMP */
-
-BTFIXUPDEF_CALL(void, flush_tlb_all, void)
-BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *)
-BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
-BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long)
-
-#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)()
-#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm)
-#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end)
-#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr)
-
-// #define flush_tlb() flush_tlb_mm(current->active_mm)	/* XXX Sure? */
-
-/*
- * This is a kludge, until I know better. --zaitcev XXX
- */
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-	flush_tlb_all();
-}
-
-#endif /* _SPARC_TLBFLUSH_H */
diff --git a/include/asm-sparc/topology.h b/include/asm-sparc/topology.h
deleted file mode 100644
index ee5ac9c9da28..000000000000
--- a/include/asm-sparc/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_SPARC_TOPOLOGY_H
-#define _ASM_SPARC_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_SPARC_TOPOLOGY_H */
diff --git a/include/asm-sparc/traps.h b/include/asm-sparc/traps.h
deleted file mode 100644
index bebdbf8f43a8..000000000000
--- a/include/asm-sparc/traps.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * traps.h:  Format of entries for the Sparc trap table.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_TRAPS_H
-#define _SPARC_TRAPS_H
-
-#define NUM_SPARC_TRAPS  255
-
-#ifndef __ASSEMBLY__
-
-/* This is for V8 compliant Sparc CPUS */
-struct tt_entry {
-	unsigned long inst_one;
-	unsigned long inst_two;
-	unsigned long inst_three;
-	unsigned long inst_four;
-};
-
-/* We set this to _start in system setup. */
-extern struct tt_entry *sparc_ttable;
-
-static inline unsigned long get_tbr(void)
-{
-	unsigned long tbr;
-
-	__asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr));
-	return tbr;
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-/* For patching the trap table at boot time, we need to know how to
- * form various common Sparc instructions.  Thus these macros...
- */
-
-#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff))
-
-/* The following assumes that the branch lies before the place we
- * are branching to.  This is the case for a trap vector...
- * You have been warned.
- */
-#define SPARC_BRANCH(dest_addr, inst_addr) \
-          (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff))
-
-#define SPARC_RD_PSR_L0  (0xa1480000)
-#define SPARC_RD_WIM_L3  (0xa7500000)
-#define SPARC_NOP (0x01000000)
-
-/* Various interesting trap levels. */
-/* First, hardware traps. */
-#define SP_TRAP_TFLT    0x1          /* Text fault */
-#define SP_TRAP_II      0x2          /* Illegal Instruction */
-#define SP_TRAP_PI      0x3          /* Privileged Instruction */
-#define SP_TRAP_FPD     0x4          /* Floating Point Disabled */
-#define SP_TRAP_WOVF    0x5          /* Window Overflow */
-#define SP_TRAP_WUNF    0x6          /* Window Underflow */
-#define SP_TRAP_MNA     0x7          /* Memory Address Unaligned */
-#define SP_TRAP_FPE     0x8          /* Floating Point Exception */
-#define SP_TRAP_DFLT    0x9          /* Data Fault */
-#define SP_TRAP_TOF     0xa          /* Tag Overflow */
-#define SP_TRAP_WDOG    0xb          /* Watchpoint Detected */
-#define SP_TRAP_IRQ1    0x11         /* IRQ level 1 */
-#define SP_TRAP_IRQ2    0x12         /* IRQ level 2 */
-#define SP_TRAP_IRQ3    0x13         /* IRQ level 3 */
-#define SP_TRAP_IRQ4    0x14         /* IRQ level 4 */
-#define SP_TRAP_IRQ5    0x15         /* IRQ level 5 */
-#define SP_TRAP_IRQ6    0x16         /* IRQ level 6 */
-#define SP_TRAP_IRQ7    0x17         /* IRQ level 7 */
-#define SP_TRAP_IRQ8    0x18         /* IRQ level 8 */
-#define SP_TRAP_IRQ9    0x19         /* IRQ level 9 */
-#define SP_TRAP_IRQ10   0x1a         /* IRQ level 10 */
-#define SP_TRAP_IRQ11   0x1b         /* IRQ level 11 */
-#define SP_TRAP_IRQ12   0x1c         /* IRQ level 12 */
-#define SP_TRAP_IRQ13   0x1d         /* IRQ level 13 */
-#define SP_TRAP_IRQ14   0x1e         /* IRQ level 14 */
-#define SP_TRAP_IRQ15   0x1f         /* IRQ level 15 Non-maskable */
-#define SP_TRAP_RACC    0x20         /* Register Access Error ??? */
-#define SP_TRAP_IACC    0x21         /* Instruction Access Error */
-#define SP_TRAP_CPDIS   0x24         /* Co-Processor Disabled */
-#define SP_TRAP_BADFL   0x25         /* Unimplemented Flush Instruction */
-#define SP_TRAP_CPEXP   0x28         /* Co-Processor Exception */
-#define SP_TRAP_DACC    0x29         /* Data Access Error */
-#define SP_TRAP_DIVZ    0x2a         /* Divide By Zero */
-#define SP_TRAP_DSTORE  0x2b         /* Data Store Error ??? */
-#define SP_TRAP_DMM     0x2c         /* Data Access MMU Miss ??? */
-#define SP_TRAP_IMM     0x3c         /* Instruction Access MMU Miss ??? */
-
-/* Now the Software Traps... */
-#define SP_TRAP_SUNOS   0x80         /* SunOS System Call */
-#define SP_TRAP_SBPT    0x81         /* Software Breakpoint */
-#define SP_TRAP_SDIVZ   0x82         /* Software Divide-by-Zero trap */
-#define SP_TRAP_FWIN    0x83         /* Flush Windows */
-#define SP_TRAP_CWIN    0x84         /* Clean Windows */
-#define SP_TRAP_RCHK    0x85         /* Range Check */
-#define SP_TRAP_FUNA    0x86         /* Fix Unaligned Access */
-#define SP_TRAP_IOWFL   0x87         /* Integer Overflow */
-#define SP_TRAP_SOLARIS 0x88         /* Solaris System Call */
-#define SP_TRAP_NETBSD  0x89         /* NetBSD System Call */
-#define SP_TRAP_LINUX   0x90         /* Linux System Call */
-
-/* Names used for compatibility with SunOS */
-#define ST_SYSCALL              0x00
-#define ST_BREAKPOINT           0x01
-#define ST_DIV0                 0x02
-#define ST_FLUSH_WINDOWS        0x03
-#define ST_CLEAN_WINDOWS        0x04
-#define ST_RANGE_CHECK          0x05
-#define ST_FIX_ALIGN            0x06
-#define ST_INT_OVERFLOW         0x07
-
-/* Special traps... */
-#define SP_TRAP_KBPT1   0xfe         /* KADB/PROM Breakpoint one */
-#define SP_TRAP_KBPT2   0xff         /* KADB/PROM Breakpoint two */
-
-/* Handy Macros */
-/* Is this a trap we never expect to get? */
-#define BAD_TRAP_P(level) \
-        ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \
-	 (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \
-	 (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \
-	 (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \
-	 (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \
-	 (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1))
-
-/* Is this a Hardware trap? */
-#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS))
-
-/* Is this a Software trap? */
-#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2))
-
-/* Is this a system call for some OS we know about? */
-#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \
-			     (level == SP_TRAP_SOLARIS) || \
-			     (level == SP_TRAP_NETBSD) || \
-			     (level == SP_TRAP_LINUX))
-
-#endif /* !(_SPARC_TRAPS_H) */
diff --git a/include/asm-sparc/tsunami.h b/include/asm-sparc/tsunami.h
deleted file mode 100644
index 5bbd1d523baa..000000000000
--- a/include/asm-sparc/tsunami.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * tsunami.h:  Module specific definitions for Tsunami V8 Sparcs
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_TSUNAMI_H
-#define _SPARC_TSUNAMI_H
-
-#include <asm/asi.h>
-
-/* The MMU control register on the Tsunami:
- *
- * -----------------------------------------------------------------------
- * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME|
- * -----------------------------------------------------------------------
- *  31      24 23 22 21 20 19-18 17  16 14  13-12 11 10-9  8  7 6-2  1  0
- *
- * SW: Enable Software Table Walks  0=off 1=on
- * AV: Address View bit
- * DV: Data View bit
- * MV: Memory View bit
- * PC: Parity Control
- * ITD: ITBR disable
- * ALC: Alternate Cacheable
- * PE: Parity Enable   0=off 1=on
- * RC: Refresh Control
- * IE: Instruction cache Enable  0=off 1=on
- * DE: Data cache Enable  0=off 1=on
- * NF: No Fault, same as all other SRMMUs
- * ME: MMU Enable, same as all other SRMMUs
- */
-
-#define TSUNAMI_SW        0x00800000
-#define TSUNAMI_AV        0x00400000
-#define TSUNAMI_DV        0x00200000
-#define TSUNAMI_MV        0x00100000
-#define TSUNAMI_PC        0x00020000
-#define TSUNAMI_ITD       0x00010000
-#define TSUNAMI_ALC       0x00008000
-#define TSUNAMI_PE        0x00001000
-#define TSUNAMI_RCMASK    0x00000C00
-#define TSUNAMI_IENAB     0x00000200
-#define TSUNAMI_DENAB     0x00000100
-#define TSUNAMI_NF        0x00000002
-#define TSUNAMI_ME        0x00000001
-
-static inline void tsunami_flush_icache(void)
-{
-	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
-			     : /* no outputs */
-			     : "i" (ASI_M_IC_FLCLEAR)
-			     : "memory");
-}
-
-static inline void tsunami_flush_dcache(void)
-{
-	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
-			     : /* no outputs */
-			     : "i" (ASI_M_DC_FLCLEAR)
-			     : "memory");
-}
-
-#endif /* !(_SPARC_TSUNAMI_H) */
diff --git a/include/asm-sparc/turbosparc.h b/include/asm-sparc/turbosparc.h
deleted file mode 100644
index 17c73282db0a..000000000000
--- a/include/asm-sparc/turbosparc.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * turbosparc.h:  Defines specific to the TurboSparc module.
- *            This is SRMMU stuff.
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#ifndef _SPARC_TURBOSPARC_H
-#define _SPARC_TURBOSPARC_H
-
-#include <asm/asi.h>
-#include <asm/pgtsrmmu.h>
-
-/* Bits in the SRMMU control register for TurboSparc modules.
- *
- * -------------------------------------------------------------------
- * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME|
- * -------------------------------------------------------------------
- *  31    24 23-21 20-19 18 17 16-15 14 13-10  9  8  7  6-3   2  1  0
- *
- * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
- *
- * This indicates whether the TurboSparc is in boot-mode or not.
- *
- * IC: Instruction Cache -- 0 = off, 1 = on
- * DC: Data Cache -- 0 = off, 1 = 0n
- *
- * These bits enable the on-cpu TurboSparc split I/D caches.
- *
- * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache
- * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
- * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
- *
- */
-
-#define TURBOSPARC_MMUENABLE    0x00000001
-#define TURBOSPARC_NOFAULT      0x00000002
-#define TURBOSPARC_ICSNOOP	0x00000004
-#define TURBOSPARC_PSO          0x00000080
-#define TURBOSPARC_DCENABLE     0x00000100   /* Enable data cache */
-#define TURBOSPARC_ICENABLE     0x00000200   /* Enable instruction cache */
-#define TURBOSPARC_BMODE        0x00004000   
-#define TURBOSPARC_PARITYODD	0x00020000   /* Parity odd, if enabled */
-#define TURBOSPARC_PCENABLE	0x00040000   /* Enable parity checking */
-
-/* Bits in the CPU configuration register for TurboSparc modules.
- *
- * -------------------------------------------------------
- * |IOClk|SNP|AXClk| RAH |  WS |  RSV  |SBC|WT|uS2|SE|SCC|
- * -------------------------------------------------------
- *    31   30 29-28 27-26 25-23   22-8  7-6  5  4   3 2-0
- *
- */
-
-#define TURBOSPARC_SCENABLE 0x00000008	 /* Secondary cache enable */
-#define TURBOSPARC_uS2	    0x00000010   /* Swift compatibility mode */
-#define TURBOSPARC_WTENABLE 0x00000020	 /* Write thru for dcache */
-#define TURBOSPARC_SNENABLE 0x40000000	 /* DVMA snoop enable */
-
-#ifndef __ASSEMBLY__
-
-/* Bits [13:5] select one of 512 instruction cache tags */
-static inline void turbosparc_inv_insn_tag(unsigned long addr)
-{
-        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
-			     : "memory");
-}
-
-/* Bits [13:5] select one of 512 data cache tags */
-static inline void turbosparc_inv_data_tag(unsigned long addr)
-{
-        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
-			     : "memory");
-}
-
-static inline void turbosparc_flush_icache(void)
-{
-	unsigned long addr;
-
-        for (addr = 0; addr < 0x4000; addr += 0x20)
-                turbosparc_inv_insn_tag(addr);
-}
-
-static inline void turbosparc_flush_dcache(void)
-{
-	unsigned long addr;
-
-        for (addr = 0; addr < 0x4000; addr += 0x20)
-                turbosparc_inv_data_tag(addr);
-}
-
-static inline void turbosparc_idflash_clear(void)
-{
-	unsigned long addr;
-
-        for (addr = 0; addr < 0x4000; addr += 0x20) {
-                turbosparc_inv_insn_tag(addr);
-                turbosparc_inv_data_tag(addr);
-	}
-}
-
-static inline void turbosparc_set_ccreg(unsigned long regval)
-{
-	__asm__ __volatile__("sta %0, [%1] %2\n\t"
-			     : /* no outputs */
-			     : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS)
-			     : "memory");
-}
-
-static inline unsigned long turbosparc_get_ccreg(void)
-{
-	unsigned long regval;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t"
-			     : "=r" (regval)
-			     : "r" (0x600), "i" (ASI_M_MMUREGS));
-	return regval;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* !(_SPARC_TURBOSPARC_H) */
diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h
deleted file mode 100644
index 07734f942405..000000000000
--- a/include/asm-sparc/types.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _SPARC_TYPES_H
-#define _SPARC_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-typedef u32 dma_addr_t;
-typedef u32 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* defined(_SPARC_TYPES_H) */
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
deleted file mode 100644
index 47d5619d43fa..000000000000
--- a/include/asm-sparc/uaccess.h
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * uaccess.h: User space memore access functions.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#ifndef _ASM_UACCESS_H
-#define _ASM_UACCESS_H
-
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <asm/vac-ops.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-/* Sparc is not segmented, however we need to be able to fool access_ok()
- * when doing system calls from kernel mode legitimately.
- *
- * "For historical reasons, these macros are grossly misnamed." -Linus
- */
-
-#define KERNEL_DS   ((mm_segment_t) { 0 })
-#define USER_DS     ((mm_segment_t) { -1 })
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(current->thread.current_ds)
-#define set_fs(val)	((current->thread.current_ds) = (val))
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
- * can be fairly lightweight.
- * No one can read/write anything from userland in the kernel space by setting
- * large size and address near to PAGE_OFFSET - a fault will break his intentions.
- */
-#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
-#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
-#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
-#define access_ok(type, addr, size)					\
-	({ (void)(type); __access_ok((unsigned long)(addr), size); })
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- *
- * There is a special way how to put a range of potentially faulting
- * insns (like twenty ldd/std's with now intervening other instructions)
- * You specify address of first in insn and 0 in fixup and in the next
- * exception_table_entry you specify last potentially faulting insn + 1
- * and in fixup the routine which should handle the fault.
- * That fixup code will get
- * (faulting_insn_address - first_insn_in_the_range_address)/4
- * in %g2 (ie. index of the faulting instruction in the range).
- */
-
-struct exception_table_entry
-{
-        unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
-
-extern void __ret_efault(void);
-
-/* Uh, these should become the main single-value transfer routines..
- * They automatically use the right size if we just have the right
- * pointer type..
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- */
-#define put_user(x,ptr) ({ \
-unsigned long __pu_addr = (unsigned long)(ptr); \
-__chk_user_ptr(ptr); \
-__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
-
-#define get_user(x,ptr) ({ \
-unsigned long __gu_addr = (unsigned long)(ptr); \
-__chk_user_ptr(ptr); \
-__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) ((struct __large_struct __user *)(x))
-
-#define __put_user_check(x,addr,size) ({ \
-register int __pu_ret; \
-if (__access_ok(addr,size)) { \
-switch (size) { \
-case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
-case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
-case 4: __put_user_asm(x,,addr,__pu_ret); break; \
-case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
-default: __pu_ret = __put_user_bad(); break; \
-} } else { __pu_ret = -EFAULT; } __pu_ret; })
-
-#define __put_user_nocheck(x,addr,size) ({ \
-register int __pu_ret; \
-switch (size) { \
-case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
-case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
-case 4: __put_user_asm(x,,addr,__pu_ret); break; \
-case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
-default: __pu_ret = __put_user_bad(); break; \
-} __pu_ret; })
-
-#define __put_user_asm(x,size,addr,ret)					\
-__asm__ __volatile__(							\
-	"/* Put user asm, inline. */\n"					\
-"1:\t"	"st"#size " %1, %2\n\t"						\
-	"clr	%0\n"							\
-"2:\n\n\t"								\
-	".section .fixup,#alloc,#execinstr\n\t"				\
-	".align	4\n"							\
-"3:\n\t"								\
-	"b	2b\n\t"							\
-	" mov	%3, %0\n\t"						\
-        ".previous\n\n\t"						\
-	".section __ex_table,#alloc\n\t"				\
-	".align	4\n\t"							\
-	".word	1b, 3b\n\t"						\
-	".previous\n\n\t"						\
-       : "=&r" (ret) : "r" (x), "m" (*__m(addr)),			\
-	 "i" (-EFAULT))
-
-extern int __put_user_bad(void);
-
-#define __get_user_check(x,addr,size,type) ({ \
-register int __gu_ret; \
-register unsigned long __gu_val; \
-if (__access_ok(addr,size)) { \
-switch (size) { \
-case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
-case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
-case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
-case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
-default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
-} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
-
-#define __get_user_check_ret(x,addr,size,type,retval) ({ \
-register unsigned long __gu_val __asm__ ("l1"); \
-if (__access_ok(addr,size)) { \
-switch (size) { \
-case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
-case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
-case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
-case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
-default: if (__get_user_bad()) return retval; \
-} x = (type) __gu_val; } else return retval; })
-
-#define __get_user_nocheck(x,addr,size,type) ({ \
-register int __gu_ret; \
-register unsigned long __gu_val; \
-switch (size) { \
-case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
-case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
-case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
-case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
-default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
-} x = (type) __gu_val; __gu_ret; })
-
-#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
-register unsigned long __gu_val __asm__ ("l1"); \
-switch (size) { \
-case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
-case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
-case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
-case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
-default: if (__get_user_bad()) return retval; \
-} x = (type) __gu_val; })
-
-#define __get_user_asm(x,size,addr,ret)					\
-__asm__ __volatile__(							\
-	"/* Get user asm, inline. */\n"					\
-"1:\t"	"ld"#size " %2, %1\n\t"						\
-	"clr	%0\n"							\
-"2:\n\n\t"								\
-	".section .fixup,#alloc,#execinstr\n\t"				\
-	".align	4\n"							\
-"3:\n\t"								\
-	"clr	%1\n\t"							\
-	"b	2b\n\t"							\
-	" mov	%3, %0\n\n\t"						\
-	".previous\n\t"							\
-	".section __ex_table,#alloc\n\t"				\
-	".align	4\n\t"							\
-	".word	1b, 3b\n\n\t"						\
-	".previous\n\t"							\
-       : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),			\
-	 "i" (-EFAULT))
-
-#define __get_user_asm_ret(x,size,addr,retval)				\
-if (__builtin_constant_p(retval) && retval == -EFAULT)			\
-__asm__ __volatile__(							\
-	"/* Get user asm ret, inline. */\n"				\
-"1:\t"	"ld"#size " %1, %0\n\n\t"					\
-	".section __ex_table,#alloc\n\t"				\
-	".align	4\n\t"							\
-	".word	1b,__ret_efault\n\n\t"					\
-	".previous\n\t"							\
-       : "=&r" (x) : "m" (*__m(addr)));					\
-else									\
-__asm__ __volatile__(							\
-	"/* Get user asm ret, inline. */\n"				\
-"1:\t"	"ld"#size " %1, %0\n\n\t"					\
-	".section .fixup,#alloc,#execinstr\n\t"				\
-	".align	4\n"							\
-"3:\n\t"								\
-	"ret\n\t"							\
-	" restore %%g0, %2, %%o0\n\n\t"					\
-	".previous\n\t"							\
-	".section __ex_table,#alloc\n\t"				\
-	".align	4\n\t"							\
-	".word	1b, 3b\n\n\t"						\
-	".previous\n\t"							\
-       : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
-
-extern int __get_user_bad(void);
-
-extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
-
-static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	if (n && __access_ok((unsigned long) to, n))
-		return __copy_user(to, (__force void __user *) from, n);
-	else
-		return n;
-}
-
-static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	return __copy_user(to, (__force void __user *) from, n);
-}
-
-static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	if (n && __access_ok((unsigned long) from, n))
-		return __copy_user((__force void __user *) to, from, n);
-	else
-		return n;
-}
-
-static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	return __copy_user((__force void __user *) to, from, n);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-static inline unsigned long __clear_user(void __user *addr, unsigned long size)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__ (
-		".section __ex_table,#alloc\n\t"
-		".align 4\n\t"
-		".word 1f,3\n\t"
-		".previous\n\t"
-		"mov %2, %%o1\n"
-		"1:\n\t"
-		"call __bzero\n\t"
-		" mov %1, %%o0\n\t"
-		"mov %%o0, %0\n"
-		: "=r" (ret) : "r" (addr), "r" (size) :
-		"o0", "o1", "o2", "o3", "o4", "o5", "o7",
-		"g1", "g2", "g3", "g4", "g5", "g7", "cc");
-
-	return ret;
-}
-
-static inline unsigned long clear_user(void __user *addr, unsigned long n)
-{
-	if (n && __access_ok((unsigned long) addr, n))
-		return __clear_user(addr, n);
-	else
-		return n;
-}
-
-extern long __strncpy_from_user(char *dest, const char __user *src, long count);
-
-static inline long strncpy_from_user(char *dest, const char __user *src, long count)
-{
-	if (__access_ok((unsigned long) src, count))
-		return __strncpy_from_user(dest, src, count);
-	else
-		return -EFAULT;
-}
-
-extern long __strlen_user(const char __user *);
-extern long __strnlen_user(const char __user *, long len);
-
-static inline long strlen_user(const char __user *str)
-{
-	if (!access_ok(VERIFY_READ, str, 0))
-		return 0;
-	else
-		return __strlen_user(str);
-}
-
-static inline long strnlen_user(const char __user *str, long len)
-{
-	if (!access_ok(VERIFY_READ, str, 0))
-		return 0;
-	else
-		return __strnlen_user(str, len);
-}
-
-#endif  /* __ASSEMBLY__ */
-
-#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-sparc/unaligned.h b/include/asm-sparc/unaligned.h
deleted file mode 100644
index 11d2d5fb5902..000000000000
--- a/include/asm-sparc/unaligned.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASM_SPARC_UNALIGNED_H
-#define _ASM_SPARC_UNALIGNED_H
-
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif /* _ASM_SPARC_UNALIGNED_H */
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
deleted file mode 100644
index 2338a0276377..000000000000
--- a/include/asm-sparc/unistd.h
+++ /dev/null
@@ -1,378 +0,0 @@
-#ifndef _SPARC_UNISTD_H
-#define _SPARC_UNISTD_H
-
-/*
- * System calls under the Sparc.
- *
- * Don't be scared by the ugly clobbers, it is the only way I can
- * think of right now to force the arguments into fixed registers
- * before the trap into the system call with gcc 'asm' statements.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- *
- * SunOS compatibility based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- */
-
-#define __NR_restart_syscall      0 /* Linux Specific				   */
-#define __NR_exit                 1 /* Common                                      */
-#define __NR_fork                 2 /* Common                                      */
-#define __NR_read                 3 /* Common                                      */
-#define __NR_write                4 /* Common                                      */
-#define __NR_open                 5 /* Common                                      */
-#define __NR_close                6 /* Common                                      */
-#define __NR_wait4                7 /* Common                                      */
-#define __NR_creat                8 /* Common                                      */
-#define __NR_link                 9 /* Common                                      */
-#define __NR_unlink              10 /* Common                                      */
-#define __NR_execv               11 /* SunOS Specific                              */
-#define __NR_chdir               12 /* Common                                      */
-#define __NR_chown		 13 /* Common					   */
-#define __NR_mknod               14 /* Common                                      */
-#define __NR_chmod               15 /* Common                                      */
-#define __NR_lchown              16 /* Common                                      */
-#define __NR_brk                 17 /* Common                                      */
-#define __NR_perfctr             18 /* Performance counter operations              */
-#define __NR_lseek               19 /* Common                                      */
-#define __NR_getpid              20 /* Common                                      */
-#define __NR_capget		 21 /* Linux Specific				   */
-#define __NR_capset		 22 /* Linux Specific				   */
-#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
-#define __NR_getuid              24 /* Common                                      */
-#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
-#define __NR_ptrace              26 /* Common                                      */
-#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
-#define __NR_sigaltstack	 28 /* Common					   */
-#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
-#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
-#define __NR_lchown32            31 /* Linux sparc32 specific                      */
-#define __NR_fchown32            32 /* Linux sparc32 specific                      */
-#define __NR_access              33 /* Common                                      */
-#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
-#define __NR_chown32             35 /* Linux sparc32 specific                      */
-#define __NR_sync                36 /* Common                                      */
-#define __NR_kill                37 /* Common                                      */
-#define __NR_stat                38 /* Common                                      */
-#define __NR_sendfile		 39 /* Linux Specific				   */
-#define __NR_lstat               40 /* Common                                      */
-#define __NR_dup                 41 /* Common                                      */
-#define __NR_pipe                42 /* Common                                      */
-#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
-#define __NR_getuid32            44 /* Linux sparc32 specific                      */
-#define __NR_umount2             45 /* Linux Specific                              */
-#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
-#define __NR_getgid              47 /* Common                                      */
-#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
-#define __NR_geteuid             49 /* SunOS calls getuid()                        */
-#define __NR_getegid             50 /* SunOS calls getgid()                        */
-#define __NR_acct                51 /* Common                                      */
-/* #define __NR_memory_ordering  52    Linux sparc64 specific			   */
-#define __NR_getgid32            53 /* Linux sparc32 specific                      */
-#define __NR_ioctl               54 /* Common                                      */
-#define __NR_reboot              55 /* Common                                      */
-#define __NR_mmap2		 56 /* Linux sparc32 Specific			   */
-#define __NR_symlink             57 /* Common                                      */
-#define __NR_readlink            58 /* Common                                      */
-#define __NR_execve              59 /* Common                                      */
-#define __NR_umask               60 /* Common                                      */
-#define __NR_chroot              61 /* Common                                      */
-#define __NR_fstat               62 /* Common                                      */
-#define __NR_fstat64		 63 /* Linux Specific			           */
-#define __NR_getpagesize         64 /* Common                                      */
-#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
-#define __NR_vfork               66 /* Common                                      */
-#define __NR_pread64             67 /* Linux Specific                              */
-#define __NR_pwrite64            68 /* Linux Specific                              */
-#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
-#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
-#define __NR_mmap                71 /* Common                                      */
-#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
-#define __NR_munmap              73 /* Common                                      */
-#define __NR_mprotect            74 /* Common                                      */
-#define __NR_madvise             75 /* Common                                      */
-#define __NR_vhangup             76 /* Common                                      */
-#define __NR_truncate64		 77 /* Linux sparc32 Specific			   */
-#define __NR_mincore             78 /* Common                                      */
-#define __NR_getgroups           79 /* Common                                      */
-#define __NR_setgroups           80 /* Common                                      */
-#define __NR_getpgrp             81 /* Common                                      */
-#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
-#define __NR_setitimer           83 /* Common                                      */
-#define __NR_ftruncate64	 84 /* Linux sparc32 Specific			   */
-#define __NR_swapon              85 /* Common                                      */
-#define __NR_getitimer           86 /* Common                                      */
-#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
-#define __NR_sethostname         88 /* Common                                      */
-#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
-#define __NR_dup2                90 /* Common                                      */
-#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
-#define __NR_fcntl               92 /* Common                                      */
-#define __NR_select              93 /* Common                                      */
-#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
-#define __NR_fsync               95 /* Common                                      */
-#define __NR_setpriority         96 /* Common                                      */
-#define __NR_socket              97 /* Common                                      */
-#define __NR_connect             98 /* Common                                      */
-#define __NR_accept              99 /* Common                                      */
-#define __NR_getpriority        100 /* Common                                      */
-#define __NR_rt_sigreturn       101 /* Linux Specific                              */
-#define __NR_rt_sigaction       102 /* Linux Specific                              */
-#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
-#define __NR_rt_sigpending      104 /* Linux Specific                              */
-#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
-#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
-#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
-#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS	   */
-#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS	   */
-#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS	   */
-#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS	   */
-#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
-#define __NR_recvmsg            113 /* Common                                      */
-#define __NR_sendmsg            114 /* Common                                      */
-#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
-#define __NR_gettimeofday       116 /* Common                                      */
-#define __NR_getrusage          117 /* Common                                      */
-#define __NR_getsockopt         118 /* Common                                      */
-#define __NR_getcwd		119 /* Linux Specific				   */
-#define __NR_readv              120 /* Common                                      */
-#define __NR_writev             121 /* Common                                      */
-#define __NR_settimeofday       122 /* Common                                      */
-#define __NR_fchown             123 /* Common                                      */
-#define __NR_fchmod             124 /* Common                                      */
-#define __NR_recvfrom           125 /* Common                                      */
-#define __NR_setreuid           126 /* Common                                      */
-#define __NR_setregid           127 /* Common                                      */
-#define __NR_rename             128 /* Common                                      */
-#define __NR_truncate           129 /* Common                                      */
-#define __NR_ftruncate          130 /* Common                                      */
-#define __NR_flock              131 /* Common                                      */
-#define __NR_lstat64		132 /* Linux Specific			           */
-#define __NR_sendto             133 /* Common                                      */
-#define __NR_shutdown           134 /* Common                                      */
-#define __NR_socketpair         135 /* Common                                      */
-#define __NR_mkdir              136 /* Common                                      */
-#define __NR_rmdir              137 /* Common                                      */
-#define __NR_utimes             138 /* SunOS Specific                              */
-#define __NR_stat64		139 /* Linux Specific			           */
-#define __NR_sendfile64         140 /* adjtime under SunOS                         */
-#define __NR_getpeername        141 /* Common                                      */
-#define __NR_futex              142 /* gethostid under SunOS                       */
-#define __NR_gettid             143 /* ENOSYS under SunOS                          */
-#define __NR_getrlimit          144 /* Common                                      */
-#define __NR_setrlimit          145 /* Common                                      */
-#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
-#define __NR_prctl		147 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
-#define __NR_getsockname        150 /* Common                                      */
-#define __NR_inotify_init       151 /* Linux specific                              */
-#define __NR_inotify_add_watch  152 /* Linux specific                              */
-#define __NR_poll               153 /* Common                                      */
-#define __NR_getdents64		154 /* Linux specific				   */
-#define __NR_fcntl64		155 /* Linux sparc32 Specific                      */
-#define __NR_inotify_rm_watch   156 /* Linux specific				   */
-#define __NR_statfs             157 /* Common                                      */
-#define __NR_fstatfs            158 /* Common                                      */
-#define __NR_umount             159 /* Common                                      */
-#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
-#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
-#define __NR_getdomainname      162 /* SunOS Specific                              */
-#define __NR_setdomainname      163 /* Common                                      */
-/* #define __NR_utrap_install   164    Linux sparc64 specific			   */
-#define __NR_quotactl           165 /* Common                                      */
-#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
-#define __NR_mount              167 /* Common                                      */
-#define __NR_ustat              168 /* Common                                      */
-#define __NR_setxattr           169 /* SunOS: semsys                               */
-#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
-#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
-#define __NR_getxattr           172 /* SunOS: auditsys                             */
-#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
-#define __NR_getdents           174 /* Common                                      */
-#define __NR_setsid             175 /* Common                                      */
-#define __NR_fchdir             176 /* Common                                      */
-#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
-#define __NR_listxattr          178 /* SunOS: vpixsys                              */
-#define __NR_llistxattr         179 /* SunOS: aioread                              */
-#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
-#define __NR_removexattr        181 /* SunOS: aiowait                              */
-#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
-#define __NR_sigpending         183 /* Common                                      */
-#define __NR_query_module	184 /* Linux Specific				   */
-#define __NR_setpgid            185 /* Common                                      */
-#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
-#define __NR_tkill              187 /* SunOS: fpathconf                            */
-#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
-#define __NR_uname              189 /* Linux Specific                              */
-#define __NR_init_module        190 /* Linux Specific                              */
-#define __NR_personality        191 /* Linux Specific                              */
-#define __NR_remap_file_pages   192 /* Linux Specific                              */
-#define __NR_epoll_create       193 /* Linux Specific                              */
-#define __NR_epoll_ctl          194 /* Linux Specific                              */
-#define __NR_epoll_wait         195 /* Linux Specific                              */
-#define __NR_ioprio_set         196 /* Linux Specific                              */
-#define __NR_getppid            197 /* Linux Specific                              */
-#define __NR_sigaction          198 /* Linux Specific                              */
-#define __NR_sgetmask           199 /* Linux Specific                              */
-#define __NR_ssetmask           200 /* Linux Specific                              */
-#define __NR_sigsuspend         201 /* Linux Specific                              */
-#define __NR_oldlstat           202 /* Linux Specific                              */
-#define __NR_uselib             203 /* Linux Specific                              */
-#define __NR_readdir            204 /* Linux Specific                              */
-#define __NR_readahead          205 /* Linux Specific                              */
-#define __NR_socketcall         206 /* Linux Specific                              */
-#define __NR_syslog             207 /* Linux Specific                              */
-#define __NR_lookup_dcookie     208 /* Linux Specific                              */
-#define __NR_fadvise64          209 /* Linux Specific                              */
-#define __NR_fadvise64_64       210 /* Linux Specific                              */
-#define __NR_tgkill             211 /* Linux Specific                              */
-#define __NR_waitpid            212 /* Linux Specific                              */
-#define __NR_swapoff            213 /* Linux Specific                              */
-#define __NR_sysinfo            214 /* Linux Specific                              */
-#define __NR_ipc                215 /* Linux Specific                              */
-#define __NR_sigreturn          216 /* Linux Specific                              */
-#define __NR_clone              217 /* Linux Specific                              */
-#define __NR_ioprio_get         218 /* Linux Specific                              */
-#define __NR_adjtimex           219 /* Linux Specific                              */
-#define __NR_sigprocmask        220 /* Linux Specific                              */
-#define __NR_create_module      221 /* Linux Specific                              */
-#define __NR_delete_module      222 /* Linux Specific                              */
-#define __NR_get_kernel_syms    223 /* Linux Specific                              */
-#define __NR_getpgid            224 /* Linux Specific                              */
-#define __NR_bdflush            225 /* Linux Specific                              */
-#define __NR_sysfs              226 /* Linux Specific                              */
-#define __NR_afs_syscall        227 /* Linux Specific                              */
-#define __NR_setfsuid           228 /* Linux Specific                              */
-#define __NR_setfsgid           229 /* Linux Specific                              */
-#define __NR__newselect         230 /* Linux Specific                              */
-#define __NR_time               231 /* Linux Specific                              */
-#define __NR_splice             232 /* Linux Specific                              */
-#define __NR_stime              233 /* Linux Specific                              */
-#define __NR_statfs64           234 /* Linux Specific                              */
-#define __NR_fstatfs64          235 /* Linux Specific                              */
-#define __NR__llseek            236 /* Linux Specific                              */
-#define __NR_mlock              237
-#define __NR_munlock            238
-#define __NR_mlockall           239
-#define __NR_munlockall         240
-#define __NR_sched_setparam     241
-#define __NR_sched_getparam     242
-#define __NR_sched_setscheduler 243
-#define __NR_sched_getscheduler 244
-#define __NR_sched_yield        245
-#define __NR_sched_get_priority_max 246
-#define __NR_sched_get_priority_min 247
-#define __NR_sched_rr_get_interval  248
-#define __NR_nanosleep          249
-#define __NR_mremap             250
-#define __NR__sysctl            251
-#define __NR_getsid             252
-#define __NR_fdatasync          253
-#define __NR_nfsservctl         254
-#define __NR_sync_file_range	255
-#define __NR_clock_settime	256
-#define __NR_clock_gettime	257
-#define __NR_clock_getres	258
-#define __NR_clock_nanosleep	259
-#define __NR_sched_getaffinity	260
-#define __NR_sched_setaffinity	261
-#define __NR_timer_settime	262
-#define __NR_timer_gettime	263
-#define __NR_timer_getoverrun	264
-#define __NR_timer_delete	265
-#define __NR_timer_create	266
-/* #define __NR_vserver		267 Reserved for VSERVER */
-#define __NR_io_setup		268
-#define __NR_io_destroy		269
-#define __NR_io_submit		270
-#define __NR_io_cancel		271
-#define __NR_io_getevents	272
-#define __NR_mq_open		273
-#define __NR_mq_unlink		274
-#define __NR_mq_timedsend	275
-#define __NR_mq_timedreceive	276
-#define __NR_mq_notify		277
-#define __NR_mq_getsetattr	278
-#define __NR_waitid		279
-#define __NR_tee		280
-#define __NR_add_key		281
-#define __NR_request_key	282
-#define __NR_keyctl		283
-#define __NR_openat		284
-#define __NR_mkdirat		285
-#define __NR_mknodat		286
-#define __NR_fchownat		287
-#define __NR_futimesat		288
-#define __NR_fstatat64		289
-#define __NR_unlinkat		290
-#define __NR_renameat		291
-#define __NR_linkat		292
-#define __NR_symlinkat		293
-#define __NR_readlinkat		294
-#define __NR_fchmodat		295
-#define __NR_faccessat		296
-#define __NR_pselect6		297
-#define __NR_ppoll		298
-#define __NR_unshare		299
-#define __NR_set_robust_list	300
-#define __NR_get_robust_list	301
-#define __NR_migrate_pages	302
-#define __NR_mbind		303
-#define __NR_get_mempolicy	304
-#define __NR_set_mempolicy	305
-#define __NR_kexec_load		306
-#define __NR_move_pages		307
-#define __NR_getcpu		308
-#define __NR_epoll_pwait	309
-#define __NR_utimensat		310
-#define __NR_signalfd		311
-#define __NR_timerfd_create	312
-#define __NR_eventfd		313
-#define __NR_fallocate		314
-#define __NR_timerfd_settime	315
-#define __NR_timerfd_gettime	316
-
-#define NR_SYSCALLS		317
-
-/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
- * it never had the plain ones and there is no value to adding those
- * old versions into the syscall table.
- */
-#define __IGNORE_setresuid
-#define __IGNORE_getresuid
-#define __IGNORE_setresgid
-#define __IGNORE_getresgid
-
-#ifdef __KERNEL__
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _SPARC_UNISTD_H */
diff --git a/include/asm-sparc/user.h b/include/asm-sparc/user.h
deleted file mode 100644
index 3400ea87f148..000000000000
--- a/include/asm-sparc/user.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC_USER_H
-#define _SPARC_USER_H
-
-/* Nothing to define.  */
-
-#endif /* !(_SPARC_USER_H) */
diff --git a/include/asm-sparc/vac-ops.h b/include/asm-sparc/vac-ops.h
deleted file mode 100644
index d10527611f11..000000000000
--- a/include/asm-sparc/vac-ops.h
+++ /dev/null
@@ -1,134 +0,0 @@
-#ifndef _SPARC_VAC_OPS_H
-#define _SPARC_VAC_OPS_H
-
-/* vac-ops.h: Inline assembly routines to do operations on the Sparc
- *            VAC (virtual address cache) for the sun4c.
- *
- * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <asm/sysen.h>
-#include <asm/contregs.h>
-#include <asm/asi.h>
-
-/* The SUN4C models have a virtually addressed write-through
- * cache.
- *
- * The cache tags are directly accessible through an ASI and
- * each have the form:
- *
- * ------------------------------------------------------------
- * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ |
- * ------------------------------------------------------------
- *  31 25  24   22     21     20     19    18 16  15   2  1  0
- *
- * MBZ: These bits are either unused and/or reserved and should
- *      be written as zeroes.
- *
- * CONTEXT: Records the context to which this cache line belongs.
- *
- * WRITE: A copy of the writable bit from the mmu pte access bits.
- *
- * PRIV: A copy of the privileged bit from the pte access bits.
- *
- * VALID: If set, this line is valid, else invalid.
- *
- * TagID: Fourteen bits of tag ID.
- *
- * Every virtual address is seen by the cache like this:
- *
- * ----------------------------------------
- * |  RESV  | TagID | LINE | BYTE-in-LINE |
- * ----------------------------------------
- *  31    30 29   16 15   4 3            0
- *
- * RESV: Unused/reserved.
- *
- * TagID: Used to match the Tag-ID in that vac tags.
- *
- * LINE: Which line within the cache
- *
- * BYTE-in-LINE: Which byte within the cache line.
- */
-
-/* Sun4c VAC Tags */
-#define S4CVACTAG_CID      0x01c00000
-#define S4CVACTAG_W        0x00200000
-#define S4CVACTAG_P        0x00100000
-#define S4CVACTAG_V        0x00080000
-#define S4CVACTAG_TID      0x0000fffc
-
-/* Sun4c VAC Virtual Address */
-/* These aren't used, why bother? (Anton) */
-#if 0
-#define S4CVACVA_TID       0x3fff0000
-#define S4CVACVA_LINE      0x0000fff0
-#define S4CVACVA_BIL       0x0000000f
-#endif
-
-/* The indexing of cache lines creates a problem.  Because the line
- * field of a virtual address extends past the page offset within
- * the virtual address it is possible to have what are called
- * 'bad aliases' which will create inconsistencies.  So we must make
- * sure that within a context that if a physical page is mapped
- * more than once, that 'extra' line bits are the same.  If this is
- * not the case, and thus is a 'bad alias' we must turn off the
- * cacheable bit in the pte's of all such pages.
- */
-
-#ifdef CONFIG_SUN4
-#define S4CVAC_BADBITS     0x0001e000
-#else
-#define S4CVAC_BADBITS    0x0000f000
-#endif
-
-/* The following is true if vaddr1 and vaddr2 would cause
- * a 'bad alias'.
- */
-#define S4CVAC_BADALIAS(vaddr1, vaddr2) \
-        ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \
-	 (S4CVAC_BADBITS))
-
-/* The following structure describes the characteristics of a sun4c
- * VAC as probed from the prom during boot time.
- */
-struct sun4c_vac_props {
-	unsigned int num_bytes;     /* Size of the cache */
-	unsigned int num_lines;     /* Number of cache lines */
-	unsigned int do_hwflushes;  /* Hardware flushing available? */
-	enum { VAC_NONE, VAC_WRITE_THROUGH,
-	    VAC_WRITE_BACK } type;  /* What type of VAC? */
-	unsigned int linesize;      /* Size of each line in bytes */
-	unsigned int log2lsize;     /* log2(linesize) */
-	unsigned int on;            /* VAC is enabled */
-};
-
-extern struct sun4c_vac_props sun4c_vacinfo;
-
-/* sun4c_enable_vac() enables the sun4c virtual address cache. */
-static inline void sun4c_enable_vac(void)
-{
-	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
-			     "or    %%g1, %2, %%g1\n\t"
-			     "stba  %%g1, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" ((unsigned int) AC_SENABLE),
-			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
-			     : "g1", "memory");
-	sun4c_vacinfo.on = 1;
-}
-
-/* sun4c_disable_vac() disables the virtual address cache. */
-static inline void sun4c_disable_vac(void)
-{
-	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
-			     "andn  %%g1, %2, %%g1\n\t"
-			     "stba  %%g1, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" ((unsigned int) AC_SENABLE),
-			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
-			     : "g1", "memory");
-	sun4c_vacinfo.on = 0;
-}
-
-#endif /* !(_SPARC_VAC_OPS_H) */
diff --git a/include/asm-sparc/vaddrs.h b/include/asm-sparc/vaddrs.h
deleted file mode 100644
index f6ca4779056c..000000000000
--- a/include/asm-sparc/vaddrs.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef _SPARC_VADDRS_H
-#define _SPARC_VADDRS_H
-
-#include <asm/head.h>
-
-/*
- * asm-sparc/vaddrs.h:  Here we define the virtual addresses at
- *                      which important things will be mapped.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
- */
-
-#define SRMMU_MAXMEM		0x0c000000
-
-#define SRMMU_NOCACHE_VADDR	(KERNBASE + SRMMU_MAXMEM)
-				/* = 0x0fc000000 */
-/* XXX Empiricals - this needs to go away - KMW */
-#define SRMMU_MIN_NOCACHE_PAGES (550)
-#define SRMMU_MAX_NOCACHE_PAGES	(1280)
-
-/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
- * to determine the amount of memory that will be reserved as nocache:
- *
- * 256 pages will be taken as nocache per each
- * SRMMU_NOCACHE_ALCRATIO MB of system memory.
- *
- * limits enforced:	nocache minimum = 256 pages
- *			nocache maximum = 1280 pages
- */
-#define SRMMU_NOCACHE_ALCRATIO	64	/* 256 pages per 64MB of system RAM */
-
-#define SUN4M_IOBASE_VADDR	0xfd000000 /* Base for mapping pages */
-#define IOBASE_VADDR		0xfe000000
-#define IOBASE_END		0xfe600000
-
-#define VMALLOC_START		0xfe600000
-
-/* XXX Alter this when I get around to fixing sun4c - Anton */
-#define VMALLOC_END		0xffc00000
-
-/*
- * On the sun4/4c we need a place
- * to reliably map locked down kernel data.  This includes the
- * task_struct and kernel stack pages of each process plus the
- * scsi buffers during dvma IO transfers, also the floppy buffers
- * during pseudo dma which runs with traps off (no faults allowed).
- * Some quick calculations yield:
- *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
- * Subtract this from 0xc00000 and you get 0x927C0 of vm left
- * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
- * careful if you change NR_TASKS or else there won't be enough
- * room for it all.
- */
-#define SUN4C_LOCK_VADDR	0xff000000
-#define SUN4C_LOCK_END		0xffc00000
-
-#define KADB_DEBUGGER_BEGVM	0xffc00000 /* Where kern debugger is in virt-mem */
-#define KADB_DEBUGGER_ENDVM	0xffd00000
-#define DEBUG_FIRSTVADDR	KADB_DEBUGGER_BEGVM
-#define DEBUG_LASTVADDR		KADB_DEBUGGER_ENDVM
-
-#define LINUX_OPPROM_BEGVM	0xffd00000
-#define LINUX_OPPROM_ENDVM	0xfff00000
-
-#define DVMA_VADDR		0xfff00000 /* Base area of the DVMA on suns */
-#define DVMA_END		0xfffc0000
-
-#endif /* !(_SPARC_VADDRS_H) */
diff --git a/include/asm-sparc/vfc_ioctls.h b/include/asm-sparc/vfc_ioctls.h
deleted file mode 100644
index af8b69007b22..000000000000
--- a/include/asm-sparc/vfc_ioctls.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Copyright (c) 1996 by Manish Vachharajani */
-
-#ifndef _LINUX_VFC_IOCTLS_H_
-#define	_LINUX_VFC_IOCTLS_H_
-
-	/* IOCTLs */
-#define VFC_IOCTL(a)          (('j' << 8) | a)
-#define VFCGCTRL	(VFC_IOCTL (0))	        /* get vfc attributes */
-#define VFCSCTRL	(VFC_IOCTL (1))  	/* set vfc attributes */
-#define VFCGVID		(VFC_IOCTL (2)) 	/* get video decoder attributes */
-#define VFCSVID		(VFC_IOCTL (3))	        /* set video decoder attributes */
-#define VFCHUE		(VFC_IOCTL (4))   	/* set hue */
-#define VFCPORTCHG	(VFC_IOCTL (5))  	/* change port */
-#define VFCRDINFO	(VFC_IOCTL (6))  	/* read info */
-
-	/* Options for setting the vfc attributes and status */
-#define MEMPRST		0x1	/* reset FIFO ptr. */
-#define CAPTRCMD	0x2	/* start capture and wait */
-#define DIAGMODE	0x3	/* diag mode */
-#define NORMMODE	0x4	/* normal mode */
-#define CAPTRSTR	0x5	/* start capture */
-#define CAPTRWAIT	0x6	/* wait for capture to finish */
-
-
-	/* Options for the decoder */
-#define STD_NTSC	0x1	/* NTSC mode */
-#define STD_PAL		0x2	/* PAL mode */
-#define COLOR_ON	0x3	/* force color ON */
-#define MONO		0x4	/* force color OFF */
-
-	/* Values returned by ioctl 2 */
-
-#define NO_LOCK	        1
-#define NTSC_COLOR	2
-#define NTSC_NOCOLOR    3
-#define PAL_COLOR	4
-#define PAL_NOCOLOR	5
-
-/* Not too sure what this does yet */
-	/* Options for setting Field number */
-#define ODD_FIELD	0x1
-#define EVEN_FIELD	0x0
-#define ACTIVE_ONLY     0x2
-#define NON_ACTIVE	0x0
-
-/* Debug options */
-#define VFC_I2C_SEND 0
-#define VFC_I2C_RECV 1
-
-struct vfc_debug_inout
-{
-	unsigned long addr;
-	unsigned long ret;
-	unsigned long len;
-	unsigned char __user *buffer;
-};
-
-#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/include/asm-sparc/vga.h b/include/asm-sparc/vga.h
deleted file mode 100644
index c69d5b2ba19a..000000000000
--- a/include/asm-sparc/vga.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *	Access to VGA videoram
- *
- *	(c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-#ifndef _LINUX_ASM_VGA_H_
-#define _LINUX_ASM_VGA_H_
-
-#include <asm/types.h>
-
-#define VT_BUF_HAVE_RW
-
-#undef scr_writew
-#undef scr_readw
-
-static inline void scr_writew(u16 val, u16 *addr)
-{
-	BUG_ON((long) addr >= 0);
-
-	*addr = val;
-}
-
-static inline u16 scr_readw(const u16 *addr)
-{
-	BUG_ON((long) addr >= 0);
-
-	return *addr;
-}
-
-#define VGA_MAP_MEM(x,s) (x)
-
-#endif
diff --git a/include/asm-sparc/viking.h b/include/asm-sparc/viking.h
deleted file mode 100644
index 989930aeb093..000000000000
--- a/include/asm-sparc/viking.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * viking.h:  Defines specific to the GNU/Viking MBUS module.
- *            This is SRMMU stuff.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_VIKING_H
-#define _SPARC_VIKING_H
-
-#include <asm/asi.h>
-#include <asm/mxcc.h>
-#include <asm/pgtsrmmu.h>
-
-/* Bits in the SRMMU control register for GNU/Viking modules.
- *
- * -----------------------------------------------------------
- * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
- * -----------------------------------------------------------
- *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
- *
- * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
- *                            1 = Twalks are cacheable in E-cache
- *
- * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
- * and never caches them internally (or so states the docs).  Therefore
- * for machines lacking an E-cache (ie. in MBUS mode) this bit must
- * remain cleared.
- *
- * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
- *                            1 = Passthru physical accesses cacheable
- *
- * This indicates whether accesses are cacheable when no cachable bit
- * is present in the pte when the processor is in boot-mode or the
- * access does not need pte's for translation (ie. pass-thru ASI's).
- * "Cachable" is only referring to E-cache (if present) and not the
- * on chip split I/D caches of the GNU/Viking.
- *
- * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
- *
- * This enables snooping on the GNU/Viking bus.  This must be on
- * for the hardware cache consistency mechanisms of the GNU/Viking
- * to work at all.  On non-mxcc GNU/Viking modules the split I/D
- * caches will snoop regardless of whether they are enabled, this
- * takes care of the case where the I or D or both caches are turned
- * off yet still contain valid data.  Note also that this bit does
- * not affect GNU/Viking store-buffer snoops, those happen if the
- * store-buffer is enabled no matter what.
- *
- * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
- *
- * This indicates whether the GNU/Viking is in boot-mode or not,
- * if it is then all instruction fetch physical addresses are
- * computed as 0xff0000000 + low 28 bits of requested address.
- * GNU/Viking boot-mode does not affect data accesses.  Also,
- * in boot mode instruction accesses bypass the split on chip I/D
- * caches, they may be cached by the GNU/MXCC if present and enabled.
- *
- * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
- *
- * This indicated the GNU/Viking configuration present.  If in
- * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
- * not then the GNU/Viking is on a module VBUS connected directly
- * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
- * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
- *
- * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
- *
- * The GNU/Viking store buffer allows the chip to continue execution
- * after a store even if the data cannot be placed in one of the
- * caches during that cycle.  If disabled, all stores operations
- * occur synchronously.
- *
- * IC: Instruction Cache -- 0 = off, 1 = on
- * DC: Data Cache -- 0 = off, 1 = 0n
- *
- * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
- * as mentioned above, these caches will snoop the bus in GNU/MBUS
- * configurations even when disabled to avoid data corruption.
- *
- * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
- * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
- *
- */
-
-#define VIKING_MMUENABLE    0x00000001
-#define VIKING_NOFAULT      0x00000002
-#define VIKING_PSO          0x00000080
-#define VIKING_DCENABLE     0x00000100   /* Enable data cache */
-#define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
-#define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
-#define VIKING_MMODE        0x00000800   /* MBUS mode */
-#define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
-#define VIKING_BMODE        0x00002000   
-#define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
-#define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
-#define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
-#define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */
-
-/*
- * GNU/Viking Breakpoint Action Register fields.
- */
-#define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */
-
-/*
- * GNU/Viking Cache Tags.
- */
-#define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
-#define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
-#define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */
-
-#ifndef __ASSEMBLY__
-
-static inline void viking_flush_icache(void)
-{
-	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
-			     : /* no outputs */
-			     : "i" (ASI_M_IC_FLCLEAR)
-			     : "memory");
-}
-
-static inline void viking_flush_dcache(void)
-{
-	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
-			     : /* no outputs */
-			     : "i" (ASI_M_DC_FLCLEAR)
-			     : "memory");
-}
-
-static inline void viking_unlock_icache(void)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
-			     : "memory");
-}
-
-static inline void viking_unlock_dcache(void)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
-			     : "memory");
-}
-
-static inline void viking_set_bpreg(unsigned long regval)
-{
-	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
-			     : /* no outputs */
-			     : "r" (regval), "i" (ASI_M_ACTION)
-			     : "memory");
-}
-
-static inline unsigned long viking_get_bpreg(void)
-{
-	unsigned long regval;
-
-	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
-			     : "=r" (regval)
-			     : "i" (ASI_M_ACTION));
-	return regval;
-}
-
-static inline void viking_get_dcache_ptag(int set, int block,
-					      unsigned long *data)
-{
-	unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
-			     0x80000000;
-	unsigned long info, page;
-
-	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
-			      "or %%g0, %%g2, %0\n\t"
-			      "or %%g0, %%g3, %1\n\t"
-			      : "=r" (info), "=r" (page)
-			      : "r" (ptag), "i" (ASI_M_DATAC_TAG)
-			      : "g2", "g3");
-	data[0] = info;
-	data[1] = page;
-}
-
-static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
-						   unsigned long *mxcc_cregp)
-{
-	unsigned long mreg = *mregp;
-	unsigned long mxcc_creg = *mxcc_cregp;
-
-	mreg &= ~(VIKING_PCENABLE);
-	mxcc_creg &= ~(MXCC_CTL_PARE);
-
-	__asm__ __volatile__ ("set 1f, %%g2\n\t"
-			      "andcc %%g2, 4, %%g0\n\t"
-			      "bne 2f\n\t"
-			      " nop\n"
-			      "1:\n\t"
-			      "sta %0, [%%g0] %3\n\t"
-			      "sta %1, [%2] %4\n\t"
-			      "b 1f\n\t"
-			      " nop\n\t"
-			      "nop\n"
-			      "2:\n\t"
-			      "sta %0, [%%g0] %3\n\t"
-			      "sta %1, [%2] %4\n"
-			      "1:\n\t"
-			      : /* no output */
-			      : "r" (mreg), "r" (mxcc_creg),
-			        "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
-			        "i" (ASI_M_MXCC)
-			      : "g2", "memory", "cc");
-	*mregp = mreg;
-	*mxcc_cregp = mxcc_creg;
-}
-
-static inline unsigned long viking_hwprobe(unsigned long vaddr)
-{
-	unsigned long val;
-
-	vaddr &= PAGE_MASK;
-	/* Probe all MMU entries. */
-	__asm__ __volatile__("lda [%1] %2, %0\n\t"
-			     : "=r" (val)
-			     : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
-	if (!val)
-		return 0;
-
-	/* Probe region. */
-	__asm__ __volatile__("lda [%1] %2, %0\n\t"
-			     : "=r" (val)
-			     : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
-	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
-		vaddr &= ~SRMMU_PGDIR_MASK;
-		vaddr >>= PAGE_SHIFT;
-		return val | (vaddr << 8);
-	}
-
-	/* Probe segment. */
-	__asm__ __volatile__("lda [%1] %2, %0\n\t"
-			     : "=r" (val)
-			     : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
-	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
-		vaddr &= ~SRMMU_REAL_PMD_MASK;
-		vaddr >>= PAGE_SHIFT;
-		return val | (vaddr << 8);
-	}
-
-	/* Probe page. */
-	__asm__ __volatile__("lda [%1] %2, %0\n\t"
-			     : "=r" (val)
-			     : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
-	return val;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* !(_SPARC_VIKING_H) */
diff --git a/include/asm-sparc/winmacro.h b/include/asm-sparc/winmacro.h
deleted file mode 100644
index 5b0a06dc3bcb..000000000000
--- a/include/asm-sparc/winmacro.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * winmacro.h: Window loading-unloading macros.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_WINMACRO_H
-#define _SPARC_WINMACRO_H
-
-#include <asm/ptrace.h>
-
-/* Store the register window onto the 8-byte aligned area starting
- * at %reg.  It might be %sp, it might not, we don't care.
- */
-#define STORE_WINDOW(reg) \
-	std	%l0, [%reg + RW_L0]; \
-	std	%l2, [%reg + RW_L2]; \
-	std	%l4, [%reg + RW_L4]; \
-	std	%l6, [%reg + RW_L6]; \
-	std	%i0, [%reg + RW_I0]; \
-	std	%i2, [%reg + RW_I2]; \
-	std	%i4, [%reg + RW_I4]; \
-	std	%i6, [%reg + RW_I6];
-
-/* Load a register window from the area beginning at %reg. */
-#define LOAD_WINDOW(reg) \
-	ldd	[%reg + RW_L0], %l0; \
-	ldd	[%reg + RW_L2], %l2; \
-	ldd	[%reg + RW_L4], %l4; \
-	ldd	[%reg + RW_L6], %l6; \
-	ldd	[%reg + RW_I0], %i0; \
-	ldd	[%reg + RW_I2], %i2; \
-	ldd	[%reg + RW_I4], %i4; \
-	ldd	[%reg + RW_I6], %i6;
-
-/* Loading and storing struct pt_reg trap frames. */
-#define LOAD_PT_INS(base_reg) \
-        ldd     [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \
-        ldd     [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \
-        ldd     [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \
-        ldd     [%base_reg + STACKFRAME_SZ + PT_I6], %i6;
-
-#define LOAD_PT_GLOBALS(base_reg) \
-        ld      [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \
-        ldd     [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \
-        ldd     [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \
-        ldd     [%base_reg + STACKFRAME_SZ + PT_G6], %g6;
-
-#define LOAD_PT_YREG(base_reg, scratch) \
-        ld      [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \
-        wr      %scratch, 0x0, %y;
-
-#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
-        ld      [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \
-        ld      [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \
-        ld      [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc;
-
-#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
-        LOAD_PT_YREG(base_reg, scratch) \
-        LOAD_PT_INS(base_reg) \
-        LOAD_PT_GLOBALS(base_reg) \
-        LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
-
-#define STORE_PT_INS(base_reg) \
-        std     %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \
-        std     %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \
-        std     %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \
-        std     %i6, [%base_reg + STACKFRAME_SZ + PT_I6];
-
-#define STORE_PT_GLOBALS(base_reg) \
-        st      %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \
-        std     %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \
-        std     %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \
-        std     %g6, [%base_reg + STACKFRAME_SZ + PT_G6];
-
-#define STORE_PT_YREG(base_reg, scratch) \
-        rd      %y, %scratch; \
-        st      %scratch, [%base_reg + STACKFRAME_SZ + PT_Y];
-
-#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
-        st      %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \
-        st      %pt_pc,  [%base_reg + STACKFRAME_SZ + PT_PC]; \
-        st      %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC];
-
-#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
-        STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
-        STORE_PT_GLOBALS(base_reg) \
-        STORE_PT_YREG(base_reg, g_scratch) \
-        STORE_PT_INS(base_reg)
-
-#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \
-        ld       [%cur_reg + TI_W_SAVED], %scratch; \
-        sll      %scratch, 2, %scratch; \
-        add      %scratch, %cur_reg, %scratch; \
-        st       %sp, [%scratch + TI_RWIN_SPTRS]; \
-        sub      %scratch, %cur_reg, %scratch; \
-        sll      %scratch, 4, %scratch; \
-        add      %scratch, %cur_reg, %scratch; \
-        STORE_WINDOW(scratch + TI_REG_WINDOW); \
-        sub      %scratch, %cur_reg, %scratch; \
-        srl      %scratch, 6, %scratch; \
-        add      %scratch, 1, %scratch; \
-        st       %scratch, [%cur_reg + TI_W_SAVED];
-
-#ifdef CONFIG_SMP
-#define LOAD_CURRENT4M(dest_reg, idreg) \
-        rd       %tbr, %idreg; \
-	sethi    %hi(current_set), %dest_reg; \
-        srl      %idreg, 10, %idreg; \
-	or       %dest_reg, %lo(current_set), %dest_reg; \
-	and      %idreg, 0xc, %idreg; \
-	ld       [%idreg + %dest_reg], %dest_reg;
-
-#define LOAD_CURRENT4D(dest_reg, idreg) \
-	lda	 [%g0] ASI_M_VIKING_TMP1, %idreg; \
-	sethi	%hi(C_LABEL(current_set)), %dest_reg; \
-	sll	%idreg, 2, %idreg; \
-	or	%dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \
-	ld	[%idreg + %dest_reg], %dest_reg;
-
-/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */
-#define LOAD_CURRENT(dest_reg, idreg) 					\
-	sethi	 %hi(___b_load_current), %idreg;			\
-	sethi    %hi(current_set), %dest_reg; 			\
-	sethi    %hi(boot_cpu_id4), %idreg; 			\
-	or       %dest_reg, %lo(current_set), %dest_reg; 	\
-	ldub	 [%idreg + %lo(boot_cpu_id4)], %idreg;		\
-	ld       [%idreg + %dest_reg], %dest_reg;
-#else
-#define LOAD_CURRENT(dest_reg, idreg) \
-        sethi    %hi(current_set), %idreg; \
-        ld       [%idreg + %lo(current_set)], %dest_reg;
-#endif
-
-#endif /* !(_SPARC_WINMACRO_H) */
diff --git a/include/asm-sparc/xor.h b/include/asm-sparc/xor.h
deleted file mode 100644
index f34b2cfa8206..000000000000
--- a/include/asm-sparc/xor.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * include/asm-sparc/xor.h
- *
- * Optimized RAID-5 checksumming functions for 32-bit Sparc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * High speed xor_block operation for RAID4/5 utilizing the
- * ldd/std SPARC instructions.
- *
- * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
- */
-
-static void
-sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	int lines = bytes / (sizeof (long)) / 8;
-
-	do {
-		__asm__ __volatile__(
-		  "ldd [%0 + 0x00], %%g2\n\t"
-		  "ldd [%0 + 0x08], %%g4\n\t"
-		  "ldd [%0 + 0x10], %%o0\n\t"
-		  "ldd [%0 + 0x18], %%o2\n\t"
-		  "ldd [%1 + 0x00], %%o4\n\t"
-		  "ldd [%1 + 0x08], %%l0\n\t"
-		  "ldd [%1 + 0x10], %%l2\n\t"
-		  "ldd [%1 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "std %%g2, [%0 + 0x00]\n\t"
-		  "std %%g4, [%0 + 0x08]\n\t"
-		  "std %%o0, [%0 + 0x10]\n\t"
-		  "std %%o2, [%0 + 0x18]\n"
-		:
-		: "r" (p1), "r" (p2)
-		: "g2", "g3", "g4", "g5",
-		  "o0", "o1", "o2", "o3", "o4", "o5",
-		  "l0", "l1", "l2", "l3", "l4", "l5");
-		p1 += 8;
-		p2 += 8;
-	} while (--lines > 0);
-}
-
-static void
-sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	unsigned long *p3)
-{
-	int lines = bytes / (sizeof (long)) / 8;
-
-	do {
-		__asm__ __volatile__(
-		  "ldd [%0 + 0x00], %%g2\n\t"
-		  "ldd [%0 + 0x08], %%g4\n\t"
-		  "ldd [%0 + 0x10], %%o0\n\t"
-		  "ldd [%0 + 0x18], %%o2\n\t"
-		  "ldd [%1 + 0x00], %%o4\n\t"
-		  "ldd [%1 + 0x08], %%l0\n\t"
-		  "ldd [%1 + 0x10], %%l2\n\t"
-		  "ldd [%1 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "ldd [%2 + 0x00], %%o4\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "ldd [%2 + 0x08], %%l0\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "ldd [%2 + 0x10], %%l2\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "ldd [%2 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "std %%g2, [%0 + 0x00]\n\t"
-		  "std %%g4, [%0 + 0x08]\n\t"
-		  "std %%o0, [%0 + 0x10]\n\t"
-		  "std %%o2, [%0 + 0x18]\n"
-		:
-		: "r" (p1), "r" (p2), "r" (p3)
-		: "g2", "g3", "g4", "g5",
-		  "o0", "o1", "o2", "o3", "o4", "o5",
-		  "l0", "l1", "l2", "l3", "l4", "l5");
-		p1 += 8;
-		p2 += 8;
-		p3 += 8;
-	} while (--lines > 0);
-}
-
-static void
-sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	unsigned long *p3, unsigned long *p4)
-{
-	int lines = bytes / (sizeof (long)) / 8;
-
-	do {
-		__asm__ __volatile__(
-		  "ldd [%0 + 0x00], %%g2\n\t"
-		  "ldd [%0 + 0x08], %%g4\n\t"
-		  "ldd [%0 + 0x10], %%o0\n\t"
-		  "ldd [%0 + 0x18], %%o2\n\t"
-		  "ldd [%1 + 0x00], %%o4\n\t"
-		  "ldd [%1 + 0x08], %%l0\n\t"
-		  "ldd [%1 + 0x10], %%l2\n\t"
-		  "ldd [%1 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "ldd [%2 + 0x00], %%o4\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "ldd [%2 + 0x08], %%l0\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "ldd [%2 + 0x10], %%l2\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "ldd [%2 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "ldd [%3 + 0x00], %%o4\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "ldd [%3 + 0x08], %%l0\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "ldd [%3 + 0x10], %%l2\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "ldd [%3 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "std %%g2, [%0 + 0x00]\n\t"
-		  "std %%g4, [%0 + 0x08]\n\t"
-		  "std %%o0, [%0 + 0x10]\n\t"
-		  "std %%o2, [%0 + 0x18]\n"
-		:
-		: "r" (p1), "r" (p2), "r" (p3), "r" (p4)
-		: "g2", "g3", "g4", "g5",
-		  "o0", "o1", "o2", "o3", "o4", "o5",
-		  "l0", "l1", "l2", "l3", "l4", "l5");
-		p1 += 8;
-		p2 += 8;
-		p3 += 8;
-		p4 += 8;
-	} while (--lines > 0);
-}
-
-static void
-sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	int lines = bytes / (sizeof (long)) / 8;
-
-	do {
-		__asm__ __volatile__(
-		  "ldd [%0 + 0x00], %%g2\n\t"
-		  "ldd [%0 + 0x08], %%g4\n\t"
-		  "ldd [%0 + 0x10], %%o0\n\t"
-		  "ldd [%0 + 0x18], %%o2\n\t"
-		  "ldd [%1 + 0x00], %%o4\n\t"
-		  "ldd [%1 + 0x08], %%l0\n\t"
-		  "ldd [%1 + 0x10], %%l2\n\t"
-		  "ldd [%1 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "ldd [%2 + 0x00], %%o4\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "ldd [%2 + 0x08], %%l0\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "ldd [%2 + 0x10], %%l2\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "ldd [%2 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "ldd [%3 + 0x00], %%o4\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "ldd [%3 + 0x08], %%l0\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "ldd [%3 + 0x10], %%l2\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "ldd [%3 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "ldd [%4 + 0x00], %%o4\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "ldd [%4 + 0x08], %%l0\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "ldd [%4 + 0x10], %%l2\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "ldd [%4 + 0x18], %%l4\n\t"
-		  "xor %%g2, %%o4, %%g2\n\t"
-		  "xor %%g3, %%o5, %%g3\n\t"
-		  "xor %%g4, %%l0, %%g4\n\t"
-		  "xor %%g5, %%l1, %%g5\n\t"
-		  "xor %%o0, %%l2, %%o0\n\t"
-		  "xor %%o1, %%l3, %%o1\n\t"
-		  "xor %%o2, %%l4, %%o2\n\t"
-		  "xor %%o3, %%l5, %%o3\n\t"
-		  "std %%g2, [%0 + 0x00]\n\t"
-		  "std %%g4, [%0 + 0x08]\n\t"
-		  "std %%o0, [%0 + 0x10]\n\t"
-		  "std %%o2, [%0 + 0x18]\n"
-		:
-		: "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
-		: "g2", "g3", "g4", "g5",
-		  "o0", "o1", "o2", "o3", "o4", "o5",
-		  "l0", "l1", "l2", "l3", "l4", "l5");
-		p1 += 8;
-		p2 += 8;
-		p3 += 8;
-		p4 += 8;
-		p5 += 8;
-	} while (--lines > 0);
-}
-
-static struct xor_block_template xor_block_SPARC = {
-	.name	= "SPARC",
-	.do_2	= sparc_2,
-	.do_3	= sparc_3,
-	.do_4	= sparc_4,
-	.do_5	= sparc_5,
-};
-
-/* For grins, also test the generic routines.  */
-#include <asm-generic/xor.h>
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES				\
-	do {						\
-		xor_speed(&xor_block_8regs);		\
-		xor_speed(&xor_block_32regs);		\
-		xor_speed(&xor_block_SPARC);		\
-	} while (0)
diff --git a/include/asm-sparc64/Kbuild b/include/asm-sparc64/Kbuild
deleted file mode 100644
index dce1cf9a9313..000000000000
--- a/include/asm-sparc64/Kbuild
+++ /dev/null
@@ -1,23 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-ALTARCH := sparc
-ARCHDEF := defined __sparc__ && defined __arch64__
-ALTARCHDEF := defined __sparc__ && !defined __arch64__
-
-header-y += apb.h
-header-y += asi.h
-header-y += bbc.h
-header-y += bpp.h
-header-y += display7seg.h
-header-y += envctrl.h
-header-y += openprom.h
-header-y += openpromio.h
-header-y += psrcompat.h
-header-y += pstate.h
-header-y += reg.h
-header-y += uctx.h
-header-y += utrap.h
-header-y += watchdog.h
-
-unifdef-y += fbio.h
-unifdef-y += perfctr.h
diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h
deleted file mode 100644
index e9fcf0e781ea..000000000000
--- a/include/asm-sparc64/agp.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef AGP_H
-#define AGP_H 1
-
-/* dummy for now */
-
-#define map_page_into_agp(page) 
-#define unmap_page_from_agp(page) 
-#define flush_agp_cache() mb()
-
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif
diff --git a/include/asm-sparc64/apb.h b/include/asm-sparc64/apb.h
deleted file mode 100644
index 8f3b57db810f..000000000000
--- a/include/asm-sparc64/apb.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * apb.h: Advanced PCI Bridge Configuration Registers and Bits
- *
- * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
- */
-
-#ifndef _SPARC64_APB_H
-#define _SPARC64_APB_H
-
-#define APB_TICK_REGISTER			0xb0
-#define APB_INT_ACK				0xb8
-#define APB_PRIMARY_MASTER_RETRY_LIMIT		0xc0
-#define APB_DMA_ASFR				0xc8
-#define APB_DMA_AFAR				0xd0
-#define APB_PIO_TARGET_RETRY_LIMIT		0xd8
-#define APB_PIO_TARGET_LATENCY_TIMER		0xd9
-#define APB_DMA_TARGET_RETRY_LIMIT		0xda
-#define APB_DMA_TARGET_LATENCY_TIMER		0xdb
-#define APB_SECONDARY_MASTER_RETRY_LIMIT	0xdc
-#define APB_SECONDARY_CONTROL			0xdd
-#define APB_IO_ADDRESS_MAP			0xde
-#define APB_MEM_ADDRESS_MAP			0xdf
-
-#define APB_PCI_CONTROL_LOW			0xe0
-#  define APB_PCI_CTL_LOW_ARB_PARK			(1 << 21)
-#  define APB_PCI_CTL_LOW_ERRINT_EN			(1 << 8)
-
-#define APB_PCI_CONTROL_HIGH			0xe4
-#  define APB_PCI_CTL_HIGH_SERR				(1 << 2)
-#  define APB_PCI_CTL_HIGH_ARBITER_EN			(1 << 0)
-
-#define APB_PIO_ASFR				0xe8
-#define APB_PIO_AFAR				0xf0
-#define APB_DIAG_REGISTER			0xf8
-
-#endif /* !(_SPARC64_APB_H) */
diff --git a/include/asm-sparc64/asi.h b/include/asm-sparc64/asi.h
deleted file mode 100644
index bc57c405e7d3..000000000000
--- a/include/asm-sparc64/asi.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _SPARC64_ASI_H
-#define _SPARC64_ASI_H
-
-/* asi.h:  Address Space Identifier values for the V9.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* V9 Architecture mandary ASIs. */
-#define ASI_N			0x04 /* Nucleus				*/
-#define ASI_NL			0x0c /* Nucleus, little endian		*/
-#define ASI_AIUP		0x10 /* Primary, user			*/
-#define ASI_AIUS		0x11 /* Secondary, user			*/
-#define ASI_AIUPL		0x18 /* Primary, user, little endian	*/
-#define ASI_AIUSL		0x19 /* Secondary, user, little endian	*/
-#define ASI_P			0x80 /* Primary, implicit		*/
-#define ASI_S			0x81 /* Secondary, implicit		*/
-#define ASI_PNF			0x82 /* Primary, no fault		*/
-#define ASI_SNF			0x83 /* Secondary, no fault		*/
-#define ASI_PL			0x88 /* Primary, implicit, l-endian	*/
-#define ASI_SL			0x89 /* Secondary, implicit, l-endian	*/
-#define ASI_PNFL		0x8a /* Primary, no fault, l-endian	*/
-#define ASI_SNFL		0x8b /* Secondary, no fault, l-endian	*/
-
-/* SpitFire and later extended ASIs.  The "(III)" marker designates
- * UltraSparc-III and later specific ASIs.  The "(CMT)" marker designates
- * Chip Multi Threading specific ASIs.  "(NG)" designates Niagara specific
- * ASIs, "(4V)" designates SUN4V specific ASIs.
- */
-#define ASI_PHYS_USE_EC		0x14 /* PADDR, E-cachable		*/
-#define ASI_PHYS_BYPASS_EC_E	0x15 /* PADDR, E-bit			*/
-#define ASI_BLK_AIUP_4V		0x16 /* (4V) Prim, user, block ld/st	*/
-#define ASI_BLK_AIUS_4V		0x17 /* (4V) Sec, user, block ld/st	*/
-#define ASI_PHYS_USE_EC_L	0x1c /* PADDR, E-cachable, little endian*/
-#define ASI_PHYS_BYPASS_EC_E_L	0x1d /* PADDR, E-bit, little endian	*/
-#define ASI_BLK_AIUP_L_4V	0x1e /* (4V) Prim, user, block, l-endian*/
-#define ASI_BLK_AIUS_L_4V	0x1f /* (4V) Sec, user, block, l-endian	*/
-#define ASI_SCRATCHPAD		0x20 /* (4V) Scratch Pad Registers	*/
-#define ASI_MMU			0x21 /* (4V) MMU Context Registers	*/
-#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load,
-					 * secondary, user
-					 */
-#define ASI_NUCLEUS_QUAD_LDD	0x24 /* Cachable, qword load		*/
-#define ASI_QUEUE		0x25 /* (4V) Interrupt Queue Registers	*/
-#define ASI_QUAD_LDD_PHYS_4V	0x26 /* (4V) Physical, qword load	*/
-#define ASI_NUCLEUS_QUAD_LDD_L	0x2c /* Cachable, qword load, l-endian 	*/
-#define ASI_QUAD_LDD_PHYS_L_4V	0x2e /* (4V) Phys, qword load, l-endian	*/
-#define ASI_PCACHE_DATA_STATUS	0x30 /* (III) PCache data stat RAM diag	*/
-#define ASI_PCACHE_DATA		0x31 /* (III) PCache data RAM diag	*/
-#define ASI_PCACHE_TAG		0x32 /* (III) PCache tag RAM diag	*/
-#define ASI_PCACHE_SNOOP_TAG	0x33 /* (III) PCache snoop tag RAM diag	*/
-#define ASI_QUAD_LDD_PHYS	0x34 /* (III+) PADDR, qword load	*/
-#define ASI_WCACHE_VALID_BITS	0x38 /* (III) WCache Valid Bits diag	*/
-#define ASI_WCACHE_DATA		0x39 /* (III) WCache data RAM diag	*/
-#define ASI_WCACHE_TAG		0x3a /* (III) WCache tag RAM diag	*/
-#define ASI_WCACHE_SNOOP_TAG	0x3b /* (III) WCache snoop tag RAM diag	*/
-#define ASI_QUAD_LDD_PHYS_L	0x3c /* (III+) PADDR, qw-load, l-endian	*/
-#define ASI_SRAM_FAST_INIT	0x40 /* (III+) Fast SRAM init		*/
-#define ASI_CORE_AVAILABLE	0x41 /* (CMT) LP Available		*/
-#define ASI_CORE_ENABLE_STAT	0x41 /* (CMT) LP Enable Status		*/
-#define ASI_CORE_ENABLE		0x41 /* (CMT) LP Enable RW		*/
-#define ASI_XIR_STEERING	0x41 /* (CMT) XIR Steering RW		*/
-#define ASI_CORE_RUNNING_RW	0x41 /* (CMT) LP Running RW		*/
-#define ASI_CORE_RUNNING_W1S	0x41 /* (CMT) LP Running Write-One Set	*/
-#define ASI_CORE_RUNNING_W1C	0x41 /* (CMT) LP Running Write-One Clr	*/
-#define ASI_CORE_RUNNING_STAT	0x41 /* (CMT) LP Running Status		*/
-#define ASI_CMT_ERROR_STEERING	0x41 /* (CMT) Error Steering RW		*/
-#define ASI_DCACHE_INVALIDATE	0x42 /* (III) DCache Invalidate diag	*/
-#define ASI_DCACHE_UTAG		0x43 /* (III) DCache uTag diag		*/
-#define ASI_DCACHE_SNOOP_TAG	0x44 /* (III) DCache snoop tag RAM diag	*/
-#define ASI_LSU_CONTROL		0x45 /* Load-store control unit		*/
-#define ASI_DCU_CONTROL_REG	0x45 /* (III) DCache Unit Control reg	*/
-#define ASI_DCACHE_DATA		0x46 /* DCache data-ram diag access	*/
-#define ASI_DCACHE_TAG		0x47 /* Dcache tag/valid ram diag access*/
-#define ASI_INTR_DISPATCH_STAT	0x48 /* IRQ vector dispatch status	*/
-#define ASI_INTR_RECEIVE	0x49 /* IRQ vector receive status	*/
-#define ASI_UPA_CONFIG		0x4a /* UPA config space		*/
-#define ASI_JBUS_CONFIG		0x4a /* (IIIi) JBUS Config Register	*/
-#define ASI_SAFARI_CONFIG	0x4a /* (III) Safari Config Register	*/
-#define ASI_SAFARI_ADDRESS	0x4a /* (III) Safari Address Register	*/
-#define ASI_ESTATE_ERROR_EN	0x4b /* E-cache error enable space	*/
-#define ASI_AFSR		0x4c /* Async fault status register	*/
-#define ASI_AFAR		0x4d /* Async fault address register	*/
-#define ASI_EC_TAG_DATA		0x4e /* E-cache tag/valid ram diag acc	*/
-#define ASI_IMMU		0x50 /* Insn-MMU main register space	*/
-#define ASI_IMMU_TSB_8KB_PTR	0x51 /* Insn-MMU 8KB TSB pointer reg	*/
-#define ASI_IMMU_TSB_64KB_PTR	0x52 /* Insn-MMU 64KB TSB pointer reg	*/
-#define ASI_ITLB_DATA_IN	0x54 /* Insn-MMU TLB data in reg	*/
-#define ASI_ITLB_DATA_ACCESS	0x55 /* Insn-MMU TLB data access reg	*/
-#define ASI_ITLB_TAG_READ	0x56 /* Insn-MMU TLB tag read reg	*/
-#define ASI_IMMU_DEMAP		0x57 /* Insn-MMU TLB demap		*/
-#define ASI_DMMU		0x58 /* Data-MMU main register space	*/
-#define ASI_DMMU_TSB_8KB_PTR	0x59 /* Data-MMU 8KB TSB pointer reg	*/
-#define ASI_DMMU_TSB_64KB_PTR	0x5a /* Data-MMU 16KB TSB pointer reg	*/
-#define ASI_DMMU_TSB_DIRECT_PTR	0x5b /* Data-MMU TSB direct pointer reg	*/
-#define ASI_DTLB_DATA_IN	0x5c /* Data-MMU TLB data in reg	*/
-#define ASI_DTLB_DATA_ACCESS	0x5d /* Data-MMU TLB data access reg	*/
-#define ASI_DTLB_TAG_READ	0x5e /* Data-MMU TLB tag read reg	*/
-#define ASI_DMMU_DEMAP		0x5f /* Data-MMU TLB demap		*/
-#define ASI_IIU_INST_TRAP	0x60 /* (III) Instruction Breakpoint	*/
-#define ASI_INTR_ID		0x63 /* (CMT) Interrupt ID register	*/
-#define ASI_CORE_ID		0x63 /* (CMT) LP ID register		*/
-#define ASI_CESR_ID		0x63 /* (CMT) CESR ID register		*/
-#define ASI_IC_INSTR		0x66 /* Insn cache instrucion ram diag	*/
-#define ASI_IC_TAG		0x67 /* Insn cache tag/valid ram diag 	*/
-#define ASI_IC_STAG		0x68 /* (III) Insn cache snoop tag ram	*/
-#define ASI_IC_PRE_DECODE	0x6e /* Insn cache pre-decode ram diag	*/
-#define ASI_IC_NEXT_FIELD	0x6f /* Insn cache next-field ram diag	*/
-#define ASI_BRPRED_ARRAY	0x6f /* (III) Branch Prediction RAM diag*/
-#define ASI_BLK_AIUP		0x70 /* Primary, user, block load/store	*/
-#define ASI_BLK_AIUS		0x71 /* Secondary, user, block ld/st	*/
-#define ASI_MCU_CTRL_REG	0x72 /* (III) Memory controller regs	*/
-#define ASI_EC_DATA		0x74 /* (III) E-cache data staging reg	*/
-#define ASI_EC_CTRL		0x75 /* (III) E-cache control reg	*/
-#define ASI_EC_W		0x76 /* E-cache diag write access	*/
-#define ASI_UDB_ERROR_W		0x77 /* External UDB error regs W	*/
-#define ASI_UDB_CONTROL_W	0x77 /* External UDB control regs W	*/
-#define ASI_INTR_W		0x77 /* IRQ vector dispatch write	*/
-#define ASI_INTR_DATAN_W	0x77 /* (III) Out irq vector data reg N	*/
-#define ASI_INTR_DISPATCH_W	0x77 /* (III) Interrupt vector dispatch	*/
-#define ASI_BLK_AIUPL		0x78 /* Primary, user, little, blk ld/st*/
-#define ASI_BLK_AIUSL		0x79 /* Secondary, user, little, blk ld/st*/
-#define ASI_EC_R		0x7e /* E-cache diag read access	*/
-#define ASI_UDBH_ERROR_R	0x7f /* External UDB error regs rd hi	*/
-#define ASI_UDBL_ERROR_R	0x7f /* External UDB error regs rd low	*/
-#define ASI_UDBH_CONTROL_R	0x7f /* External UDB control regs rd hi	*/
-#define ASI_UDBL_CONTROL_R	0x7f /* External UDB control regs rd low*/
-#define ASI_INTR_R		0x7f /* IRQ vector dispatch read	*/
-#define ASI_INTR_DATAN_R	0x7f /* (III) In irq vector data reg N	*/
-#define ASI_PST8_P		0xc0 /* Primary, 8 8-bit, partial	*/
-#define ASI_PST8_S		0xc1 /* Secondary, 8 8-bit, partial	*/
-#define ASI_PST16_P		0xc2 /* Primary, 4 16-bit, partial	*/
-#define ASI_PST16_S		0xc3 /* Secondary, 4 16-bit, partial	*/
-#define ASI_PST32_P		0xc4 /* Primary, 2 32-bit, partial	*/
-#define ASI_PST32_S		0xc5 /* Secondary, 2 32-bit, partial	*/
-#define ASI_PST8_PL		0xc8 /* Primary, 8 8-bit, partial, L	*/
-#define ASI_PST8_SL		0xc9 /* Secondary, 8 8-bit, partial, L	*/
-#define ASI_PST16_PL		0xca /* Primary, 4 16-bit, partial, L	*/
-#define ASI_PST16_SL		0xcb /* Secondary, 4 16-bit, partial, L	*/
-#define ASI_PST32_PL		0xcc /* Primary, 2 32-bit, partial, L	*/
-#define ASI_PST32_SL		0xcd /* Secondary, 2 32-bit, partial, L	*/
-#define ASI_FL8_P		0xd0 /* Primary, 1 8-bit, fpu ld/st	*/
-#define ASI_FL8_S		0xd1 /* Secondary, 1 8-bit, fpu ld/st	*/
-#define ASI_FL16_P		0xd2 /* Primary, 1 16-bit, fpu ld/st	*/
-#define ASI_FL16_S		0xd3 /* Secondary, 1 16-bit, fpu ld/st	*/
-#define ASI_FL8_PL		0xd8 /* Primary, 1 8-bit, fpu ld/st, L	*/
-#define ASI_FL8_SL		0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/
-#define ASI_FL16_PL		0xda /* Primary, 1 16-bit, fpu ld/st, L	*/
-#define ASI_FL16_SL		0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/
-#define ASI_BLK_COMMIT_P	0xe0 /* Primary, blk store commit	*/
-#define ASI_BLK_COMMIT_S	0xe1 /* Secondary, blk store commit	*/
-#define ASI_BLK_INIT_QUAD_LDD_P	0xe2 /* (NG) init-store, twin load,
-				      * primary, implicit
-				      */
-#define ASI_BLK_P		0xf0 /* Primary, blk ld/st		*/
-#define ASI_BLK_S		0xf1 /* Secondary, blk ld/st		*/
-#define ASI_BLK_PL		0xf8 /* Primary, blk ld/st, little	*/
-#define ASI_BLK_SL		0xf9 /* Secondary, blk ld/st, little	*/
-
-#endif /* _SPARC64_ASI_H */
diff --git a/include/asm-sparc64/atomic.h b/include/asm-sparc64/atomic.h
deleted file mode 100644
index 2c71ec4a3b18..000000000000
--- a/include/asm-sparc64/atomic.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* atomic.h: Thankfully the V9 is at least reasonable for this
- *           stuff.
- *
- * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
- */
-
-#ifndef __ARCH_SPARC64_ATOMIC__
-#define __ARCH_SPARC64_ATOMIC__
-
-#include <linux/types.h>
-#include <asm/system.h>
-
-typedef struct { volatile int counter; } atomic_t;
-typedef struct { volatile __s64 counter; } atomic64_t;
-
-#define ATOMIC_INIT(i)		{ (i) }
-#define ATOMIC64_INIT(i)	{ (i) }
-
-#define atomic_read(v)		((v)->counter)
-#define atomic64_read(v)	((v)->counter)
-
-#define atomic_set(v, i)	(((v)->counter) = i)
-#define atomic64_set(v, i)	(((v)->counter) = i)
-
-extern void atomic_add(int, atomic_t *);
-extern void atomic64_add(int, atomic64_t *);
-extern void atomic_sub(int, atomic_t *);
-extern void atomic64_sub(int, atomic64_t *);
-
-extern int atomic_add_ret(int, atomic_t *);
-extern int atomic64_add_ret(int, atomic64_t *);
-extern int atomic_sub_ret(int, atomic_t *);
-extern int atomic64_sub_ret(int, atomic64_t *);
-
-#define atomic_dec_return(v) atomic_sub_ret(1, v)
-#define atomic64_dec_return(v) atomic64_sub_ret(1, v)
-
-#define atomic_inc_return(v) atomic_add_ret(1, v)
-#define atomic64_inc_return(v) atomic64_add_ret(1, v)
-
-#define atomic_sub_return(i, v) atomic_sub_ret(i, v)
-#define atomic64_sub_return(i, v) atomic64_sub_ret(i, v)
-
-#define atomic_add_return(i, v) atomic_add_ret(i, v)
-#define atomic64_add_return(i, v) atomic64_add_ret(i, v)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
-
-#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
-#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0)
-
-#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0)
-#define atomic64_dec_and_test(v) (atomic64_sub_ret(1, v) == 0)
-
-#define atomic_inc(v) atomic_add(1, v)
-#define atomic64_inc(v) atomic64_add(1, v)
-
-#define atomic_dec(v) atomic_sub(1, v)
-#define atomic64_dec(v) atomic64_sub(1, v)
-
-#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0)
-#define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0)
-
-#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic64_cmpxchg(v, o, n) \
-	((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
-{
-	long c, old;
-	c = atomic64_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic64_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-/* Atomic operations are already serializing */
-#ifdef CONFIG_SMP
-#define smp_mb__before_atomic_dec()	membar_storeload_loadload();
-#define smp_mb__after_atomic_dec()	membar_storeload_storestore();
-#define smp_mb__before_atomic_inc()	membar_storeload_loadload();
-#define smp_mb__after_atomic_inc()	membar_storeload_storestore();
-#else
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-#endif
-
-#include <asm-generic/atomic.h>
-#endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/include/asm-sparc64/auxio.h b/include/asm-sparc64/auxio.h
deleted file mode 100644
index c4100494c7a5..000000000000
--- a/include/asm-sparc64/auxio.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * auxio.h:  Definitions and code for the Auxiliary I/O registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
- */
-#ifndef _SPARC64_AUXIO_H
-#define _SPARC64_AUXIO_H
-
-/* AUXIO implementations:
- * sbus-based NCR89C105 "Slavio"
- *	LED/Floppy (AUX1) register
- *	Power (AUX2) register
- *
- * ebus-based auxio on PCIO 
- *	LED Auxio Register
- *	Power Auxio Register
- *
- * Register definitions from NCR _NCR89C105 Chip Specification_
- * 
- * SLAVIO AUX1 @ 0x1900000
- * -------------------------------------------------
- * | (R) | (R) |  D  | (R) |  E  |  M  |  T  |  L  |
- * -------------------------------------------------
- * (R) - bit 7:6,4 are reserved and should be masked in s/w
- *  D  - Floppy Density Sense (1=high density) R/O
- *  E  - Link Test Enable, directly reflected on AT&T 7213 LTE pin
- *  M  - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin
- *  T  - Terminal Count: sends TC pulse to 82077 floppy controller
- *  L  - System LED on front panel (0=off, 1=on) 
- */
-#define AUXIO_AUX1_MASK		0xc0 /* Mask bits 		*/
-#define AUXIO_AUX1_FDENS	0x20 /* Floppy Density Sense	*/
-#define AUXIO_AUX1_LTE 		0x08 /* Link Test Enable 	*/
-#define AUXIO_AUX1_MMUX		0x04 /* Monitor/Mouse Mux	*/
-#define AUXIO_AUX1_FTCNT	0x02 /* Terminal Count, 	*/
-#define AUXIO_AUX1_LED		0x01 /* System LED		*/
-
-/* SLAVIO AUX2 @ 0x1910000
- * -------------------------------------------------
- * | (R) | (R) |  D  | (R) | (R) | (R) |  C  |  F  |
- * -------------------------------------------------
- * (R) - bits 7:6,4:2 are reserved and should be masked in s/w
- *  D  - Power Failure Detect (1=power fail)
- *  C  - Clear Power Failure Detect Int (1=clear)
- *  F  - Power Off (1=power off)
- */
-#define AUXIO_AUX2_MASK		0xdc /* Mask Bits		*/
-#define AUXIO_AUX2_PFAILDET	0x20 /* Power Fail Detect	*/
-#define AUXIO_AUX2_PFAILCLR 	0x02 /* Clear Pwr Fail Det Intr	*/
-#define AUXIO_AUX2_PWR_OFF	0x01 /* Power Off		*/
-
-/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837
- *
- * PCIO LED Auxio @ 0x726000
- * -------------------------------------------------
- * |             31:1 Unused                 | LED |
- * -------------------------------------------------
- * Bits 31:1 unused
- * LED - System LED on front panel (0=off, 1=on)
- */
-#define AUXIO_PCIO_LED		0x01 /* System LED 		*/ 
-
-/* PCIO Power Auxio @ 0x724000
- * -------------------------------------------------
- * |             31:2 Unused           | CPO | SPO |
- * -------------------------------------------------
- * Bits 31:2 unused
- * CPO - Courtesy Power Off (1=off)
- * SPO - System Power Off   (1=off)
- */
-#define AUXIO_PCIO_CPWR_OFF	0x02 /* Courtesy Power Off	*/
-#define AUXIO_PCIO_SPWR_OFF	0x01 /* System Power Off	*/
-
-#ifndef __ASSEMBLY__
-
-extern void __iomem *auxio_register;
-
-#define AUXIO_LTE_ON	1
-#define AUXIO_LTE_OFF	0
-
-/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
- *
- * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
- */
-extern void auxio_set_lte(int on);
-
-#define AUXIO_LED_ON	1
-#define AUXIO_LED_OFF	0
-
-/* auxio_set_led - Set system front panel LED 
- *
- * on - AUXIO_LED_ON or AUXIO_LED_OFF
- */
-extern void auxio_set_led(int on);
-
-#endif /* ifndef __ASSEMBLY__ */ 
-
-#endif /* !(_SPARC64_AUXIO_H) */
diff --git a/include/asm-sparc64/auxvec.h b/include/asm-sparc64/auxvec.h
deleted file mode 100644
index 1f45c67d7316..000000000000
--- a/include/asm-sparc64/auxvec.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/auxvec.h>
diff --git a/include/asm-sparc64/backoff.h b/include/asm-sparc64/backoff.h
deleted file mode 100644
index fa1fdf67e350..000000000000
--- a/include/asm-sparc64/backoff.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _SPARC64_BACKOFF_H
-#define _SPARC64_BACKOFF_H
-
-#define BACKOFF_LIMIT	(4 * 1024)
-
-#ifdef CONFIG_SMP
-
-#define BACKOFF_SETUP(reg)	\
-	mov	1, reg
-
-#define BACKOFF_SPIN(reg, tmp, label)	\
-	mov	reg, tmp; \
-88:	brnz,pt	tmp, 88b; \
-	 sub	tmp, 1, tmp; \
-	set	BACKOFF_LIMIT, tmp; \
-	cmp	reg, tmp; \
-	bg,pn	%xcc, label; \
-	 nop; \
-	ba,pt	%xcc, label; \
-	 sllx	reg, 1, reg;
-
-#else
-
-#define BACKOFF_SETUP(reg)
-#define BACKOFF_SPIN(reg, tmp, label) \
-	ba,pt	%xcc, label; \
-	 nop;
-
-#endif
-
-#endif /* _SPARC64_BACKOFF_H */
diff --git a/include/asm-sparc64/bbc.h b/include/asm-sparc64/bbc.h
deleted file mode 100644
index 423a85800aae..000000000000
--- a/include/asm-sparc64/bbc.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
- *        systems.
- *
- * Copyright (C) 2000 David S. Miller (davem@redhat.com)
- */
-
-#ifndef _SPARC64_BBC_H
-#define _SPARC64_BBC_H
-
-/* Register sizes are indicated by "B" (Byte, 1-byte),
- * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
- * "Q" (Quad, 8 bytes) inside brackets.
- */
-
-#define BBC_AID		0x00	/* [B] Agent ID			*/
-#define BBC_DEVP	0x01	/* [B] Device Present		*/
-#define BBC_ARB		0x02	/* [B] Arbitration		*/
-#define BBC_QUIESCE	0x03	/* [B] Quiesce			*/
-#define BBC_WDACTION	0x04	/* [B] Watchdog Action		*/
-#define BBC_SPG		0x06	/* [B] Soft POR Gen		*/
-#define BBC_SXG		0x07	/* [B] Soft XIR Gen		*/
-#define BBC_PSRC	0x08	/* [W] POR Source		*/
-#define BBC_XSRC	0x0c	/* [B] XIR Source		*/
-#define BBC_CSC		0x0d	/* [B] Clock Synthesizers Control*/
-#define BBC_ES_CTRL	0x0e	/* [H] Energy Star Control	*/
-#define BBC_ES_ACT	0x10	/* [W] E* Assert Change Time	*/
-#define BBC_ES_DACT	0x14	/* [B] E* De-Assert Change Time	*/
-#define BBC_ES_DABT	0x15	/* [B] E* De-Assert Bypass Time	*/
-#define BBC_ES_ABT	0x16	/* [H] E* Assert Bypass Time	*/
-#define BBC_ES_PST	0x18	/* [W] E* PLL Settle Time	*/
-#define BBC_ES_FSL	0x1c	/* [W] E* Frequency Switch Latency*/
-#define BBC_EBUST	0x20	/* [Q] EBUS Timing		*/
-#define BBC_JTAG_CMD	0x28	/* [W] JTAG+ Command		*/
-#define BBC_JTAG_CTRL	0x2c	/* [B] JTAG+ Control		*/
-#define BBC_I2C_SEL	0x2d	/* [B] I2C Selection		*/
-#define BBC_I2C_0_S1	0x2e	/* [B] I2C ctrlr-0 reg S1	*/
-#define BBC_I2C_0_S0	0x2f	/* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
-#define BBC_I2C_1_S1	0x30	/* [B] I2C ctrlr-1 reg S1	*/
-#define BBC_I2C_1_S0	0x31	/* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
-#define BBC_KBD_BEEP	0x32	/* [B] Keyboard Beep		*/
-#define BBC_KBD_BCNT	0x34	/* [W] Keyboard Beep Counter	*/
-
-#define BBC_REGS_SIZE	0x40
-
-/* There is a 2K scratch ram area at offset 0x80000 but I doubt
- * we will use it for anything.
- */
-
-/* Agent ID register.  This register shows the Safari Agent ID
- * for the processors.  The value returned depends upon which
- * cpu is reading the register.
- */
-#define BBC_AID_ID	0x07	/* Safari ID		*/
-#define BBC_AID_RESV	0xf8	/* Reserved		*/
-
-/* Device Present register.  One can determine which cpus are actually
- * present in the machine by interrogating this register.
- */
-#define BBC_DEVP_CPU0	0x01	/* Processor 0 present	*/
-#define BBC_DEVP_CPU1	0x02	/* Processor 1 present	*/
-#define BBC_DEVP_CPU2	0x04	/* Processor 2 present	*/
-#define BBC_DEVP_CPU3	0x08	/* Processor 3 present	*/
-#define BBC_DEVP_RESV	0xf0	/* Reserved		*/
-
-/* Arbitration register.  This register is used to block access to
- * the BBC from a particular cpu.
- */
-#define BBC_ARB_CPU0	0x01	/* Enable cpu 0 BBC arbitratrion */
-#define BBC_ARB_CPU1	0x02	/* Enable cpu 1 BBC arbitratrion */
-#define BBC_ARB_CPU2	0x04	/* Enable cpu 2 BBC arbitratrion */
-#define BBC_ARB_CPU3	0x08	/* Enable cpu 3 BBC arbitratrion */
-#define BBC_ARB_RESV	0xf0	/* Reserved			 */
-
-/* Quiesce register.  Bus and BBC segments for cpus can be disabled
- * with this register, ie. for hot plugging.
- */
-#define BBC_QUIESCE_S02	0x01	/* Quiesce Safari segment for cpu 0 and 2 */
-#define BBC_QUIESCE_S13	0x02	/* Quiesce Safari segment for cpu 1 and 3 */
-#define BBC_QUIESCE_B02	0x04	/* Quiesce BBC segment for cpu 0 and 2    */
-#define BBC_QUIESCE_B13	0x08	/* Quiesce BBC segment for cpu 1 and 3    */
-#define BBC_QUIESCE_FD0 0x10	/* Disable Fatal_Error[0] reporting	  */
-#define BBC_QUIESCE_FD1 0x20	/* Disable Fatal_Error[1] reporting	  */
-#define BBC_QUIESCE_FD2 0x40	/* Disable Fatal_Error[2] reporting	  */
-#define BBC_QUIESCE_FD3 0x80	/* Disable Fatal_Error[3] reporting	  */
-
-/* Watchdog Action register.  When the watchdog device timer expires
- * a line is enabled to the BBC.  The action BBC takes when this line
- * is asserted can be controlled by this regiser.
- */
-#define BBC_WDACTION_RST  0x01	/* When set, watchdog causes system reset.
-				 * When clear, BBC ignores watchdog signal.
-				 */
-#define BBC_WDACTION_RESV 0xfe	/* Reserved */
-
-/* Soft_POR_GEN register.  The POR (Power On Reset) signal may be asserted
- * for specific processors or all processors via this register.
- */
-#define BBC_SPG_CPU0	0x01 /* Assert POR for processor 0	*/
-#define BBC_SPG_CPU1	0x02 /* Assert POR for processor 1	*/
-#define BBC_SPG_CPU2	0x04 /* Assert POR for processor 2	*/
-#define BBC_SPG_CPU3	0x08 /* Assert POR for processor 3	*/
-#define BBC_SPG_CPUALL	0x10 /* Reset all processors and reset
-			      * the entire system.
-			      */
-#define BBC_SPG_RESV	0xe0 /* Reserved			*/
-
-/* Soft_XIR_GEN register.  The XIR (eXternally Initiated Reset) signal
- * may be asserted to specific processors via this register.
- */
-#define BBC_SXG_CPU0	0x01 /* Assert XIR for processor 0	*/
-#define BBC_SXG_CPU1	0x02 /* Assert XIR for processor 1	*/
-#define BBC_SXG_CPU2	0x04 /* Assert XIR for processor 2	*/
-#define BBC_SXG_CPU3	0x08 /* Assert XIR for processor 3	*/
-#define BBC_SXG_RESV	0xf0 /* Reserved			*/
-
-/* POR Source register.  One may identify the cause of the most recent
- * reset by reading this register.
- */
-#define BBC_PSRC_SPG0	0x0001 /* CPU 0 reset via BBC_SPG register	*/
-#define BBC_PSRC_SPG1	0x0002 /* CPU 1 reset via BBC_SPG register	*/
-#define BBC_PSRC_SPG2	0x0004 /* CPU 2 reset via BBC_SPG register	*/
-#define BBC_PSRC_SPG3	0x0008 /* CPU 3 reset via BBC_SPG register	*/
-#define BBC_PSRC_SPGSYS	0x0010 /* System reset via BBC_SPG register	*/
-#define BBC_PSRC_JTAG	0x0020 /* System reset via JTAG+		*/
-#define BBC_PSRC_BUTTON	0x0040 /* System reset via push-button dongle	*/
-#define BBC_PSRC_PWRUP	0x0080 /* System reset via power-up		*/
-#define BBC_PSRC_FE0	0x0100 /* CPU 0 reported Fatal_Error		*/
-#define BBC_PSRC_FE1	0x0200 /* CPU 1 reported Fatal_Error		*/
-#define BBC_PSRC_FE2	0x0400 /* CPU 2 reported Fatal_Error		*/
-#define BBC_PSRC_FE3	0x0800 /* CPU 3 reported Fatal_Error		*/
-#define BBC_PSRC_FE4	0x1000 /* Schizo reported Fatal_Error		*/
-#define BBC_PSRC_FE5	0x2000 /* Safari device 5 reported Fatal_Error	*/
-#define BBC_PSRC_FE6	0x4000 /* CPMS reported Fatal_Error		*/
-#define BBC_PSRC_SYNTH	0x8000 /* System reset when on-board clock synthesizers
-				* were updated.
-				*/
-#define BBC_PSRC_WDT   0x10000 /* System reset via Super I/O watchdog	*/
-#define BBC_PSRC_RSC   0x20000 /* System reset via RSC remote monitoring
-				* device
-				*/
-
-/* XIR Source register.  The source of an XIR event sent to a processor may
- * be determined via this register.
- */
-#define BBC_XSRC_SXG0	0x01	/* CPU 0 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_SXG1	0x02	/* CPU 1 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_SXG2	0x04	/* CPU 2 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_SXG3	0x08	/* CPU 3 received XIR via Soft_XIR_GEN reg */
-#define BBC_XSRC_JTAG	0x10	/* All CPUs received XIR via JTAG+         */
-#define BBC_XSRC_W_OR_B	0x20	/* All CPUs received XIR either because:
-				 * a) Super I/O watchdog fired, or
-				 * b) XIR push button was activated
-				 */
-#define BBC_XSRC_RESV	0xc0	/* Reserved				   */
-
-/* Clock Synthesizers Control register.  This register provides the big-bang
- * programming interface to the two clock synthesizers of the machine.
- */
-#define BBC_CSC_SLOAD	0x01	/* Directly connected to S_LOAD pins	*/
-#define BBC_CSC_SDATA	0x02	/* Directly connected to S_DATA pins	*/
-#define BBC_CSC_SCLOCK	0x04	/* Directly connected to S_CLOCK pins	*/
-#define BBC_CSC_RESV	0x78	/* Reserved				*/
-#define BBC_CSC_RST	0x80	/* Generate system reset when S_LOAD==1	*/
-
-/* Energy Star Control register.  This register is used to generate the
- * clock frequency change trigger to the main system devices (Schizo and
- * the processors).  The transition occurs when bits in this register
- * go from 0 to 1, only one bit must be set at once else no action
- * occurs.  Basically the sequence of events is:
- * a) Choose new frequency: full, 1/2 or 1/32
- * b) Program this desired frequency into the cpus and Schizo.
- * c) Set the same value in this register.
- * d) 16 system clocks later, clear this register.
- */
-#define BBC_ES_CTRL_1_1		0x01	/* Full frequency	*/
-#define BBC_ES_CTRL_1_2		0x02	/* 1/2 frequency	*/
-#define BBC_ES_CTRL_1_32	0x20	/* 1/32 frequency	*/
-#define BBC_ES_RESV		0xdc	/* Reserved		*/
-
-/* Energy Star Assert Change Time register.  This determines the number
- * of BBC clock cycles (which is half the system frequency) between
- * the detection of FREEZE_ACK being asserted and the assertion of
- * the CLK_CHANGE_L[2:0] signals.
- */
-#define BBC_ES_ACT_VAL	0xff
-
-/* Energy Star Assert Bypass Time register.  This determines the number
- * of BBC clock cycles (which is half the system frequency) between
- * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
- * the ESTAR_PLL_BYPASS signal.
- */
-#define BBC_ES_ABT_VAL	0xffff
-
-/* Energy Star PLL Settle Time register.  This determines the number of
- * BBC clock cycles (which is half the system frequency) between the
- * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
- * signal.
- */
-#define BBC_ES_PST_VAL	0xffffffff
-
-/* Energy Star Frequency Switch Latency register.  This is the number of
- * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
- * edge of the Safari clock at the new frequency.
- */
-#define BBC_ES_FSL_VAL	0xffffffff
-
-/* Keyboard Beep control register.  This is a simple enabler for the audio
- * beep sound.
- */
-#define BBC_KBD_BEEP_ENABLE	0x01 /* Enable beep	*/
-#define BBC_KBD_BEEP_RESV	0xfe /* Reserved	*/
-
-/* Keyboard Beep Counter register.  There is a free-running counter inside
- * the BBC which runs at half the system clock.  The bit set in this register
- * determines when the audio sound is generated.  So for example if bit
- * 10 is set, the audio beep will oscillate at 1/(2**12).  The keyboard beep
- * generator automatically selects a different bit to use if the system clock
- * is changed via Energy Star.
- */
-#define BBC_KBD_BCNT_BITS	0x0007fc00
-#define BBC_KBC_BCNT_RESV	0xfff803ff
-
-#endif /* _SPARC64_BBC_H */
-
diff --git a/include/asm-sparc64/bitops.h b/include/asm-sparc64/bitops.h
deleted file mode 100644
index bb87b8080220..000000000000
--- a/include/asm-sparc64/bitops.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * bitops.h: Bit string operations on the V9.
- *
- * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC64_BITOPS_H
-#define _SPARC64_BITOPS_H
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h>
-
-extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
-extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
-extern int test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
-extern void set_bit(unsigned long nr, volatile unsigned long *addr);
-extern void clear_bit(unsigned long nr, volatile unsigned long *addr);
-extern void change_bit(unsigned long nr, volatile unsigned long *addr);
-
-#include <asm-generic/bitops/non-atomic.h>
-
-#ifdef CONFIG_SMP
-#define smp_mb__before_clear_bit()	membar_storeload_loadload()
-#define smp_mb__after_clear_bit()	membar_storeload_storestore()
-#else
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-#endif
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffs.h>
-
-/*
- * hweightN: returns the hamming weight (i.e. the number
- * of bits set) of a N-bit word
- */
-
-#ifdef ULTRA_HAS_POPULATION_COUNT
-
-static inline unsigned int hweight64(unsigned long w)
-{
-	unsigned int res;
-
-	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w));
-	return res;
-}
-
-static inline unsigned int hweight32(unsigned int w)
-{
-	unsigned int res;
-
-	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffffffff));
-	return res;
-}
-
-static inline unsigned int hweight16(unsigned int w)
-{
-	unsigned int res;
-
-	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffff));
-	return res;
-}
-
-static inline unsigned int hweight8(unsigned int w)
-{
-	unsigned int res;
-
-	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xff));
-	return res;
-}
-
-#else
-
-#include <asm-generic/bitops/hweight.h>
-
-#endif
-#include <asm-generic/bitops/lock.h>
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/find.h>
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-
-#define ext2_set_bit_atomic(lock,nr,addr) \
-	test_and_set_bit((nr) ^ 0x38,(unsigned long *)(addr))
-#define ext2_clear_bit_atomic(lock,nr,addr) \
-	test_and_clear_bit((nr) ^ 0x38,(unsigned long *)(addr))
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* defined(_SPARC64_BITOPS_H) */
diff --git a/include/asm-sparc64/bpp.h b/include/asm-sparc64/bpp.h
deleted file mode 100644
index 514eee20272e..000000000000
--- a/include/asm-sparc64/bpp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bpp.h>
diff --git a/include/asm-sparc64/bug.h b/include/asm-sparc64/bug.h
deleted file mode 100644
index 3433737c7a67..000000000000
--- a/include/asm-sparc64/bug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bug.h>
diff --git a/include/asm-sparc64/bugs.h b/include/asm-sparc64/bugs.h
deleted file mode 100644
index 04ae9e2818cf..000000000000
--- a/include/asm-sparc64/bugs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/bugs.h>
diff --git a/include/asm-sparc64/byteorder.h b/include/asm-sparc64/byteorder.h
deleted file mode 100644
index f672855bee17..000000000000
--- a/include/asm-sparc64/byteorder.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/byteorder.h>
diff --git a/include/asm-sparc64/cache.h b/include/asm-sparc64/cache.h
deleted file mode 100644
index fa9de5cadbf1..000000000000
--- a/include/asm-sparc64/cache.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cache.h>
diff --git a/include/asm-sparc64/cacheflush.h b/include/asm-sparc64/cacheflush.h
deleted file mode 100644
index 122e4058dd9e..000000000000
--- a/include/asm-sparc64/cacheflush.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _SPARC64_CACHEFLUSH_H
-#define _SPARC64_CACHEFLUSH_H
-
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/mm.h>
-
-/* Cache flush operations. */
-
-/* These are the same regardless of whether this is an SMP kernel or not. */
-#define flush_cache_mm(__mm) \
-	do { if ((__mm) == current->mm) flushw_user(); } while(0)
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-#define flush_cache_range(vma, start, end) \
-	flush_cache_mm((vma)->vm_mm)
-#define flush_cache_page(vma, page, pfn) \
-	flush_cache_mm((vma)->vm_mm)
-
-/* 
- * On spitfire, the icache doesn't snoop local stores and we don't
- * use block commit stores (which invalidate icache lines) during
- * module load, so we need this.
- */
-extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void __flush_icache_page(unsigned long);
-
-extern void __flush_dcache_page(void *addr, int flush_icache);
-extern void flush_dcache_page_impl(struct page *page);
-#ifdef CONFIG_SMP
-extern void smp_flush_dcache_page_impl(struct page *page, int cpu);
-extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page);
-#else
-#define smp_flush_dcache_page_impl(page,cpu) flush_dcache_page_impl(page)
-#define flush_dcache_page_all(mm,page) flush_dcache_page_impl(page)
-#endif
-
-extern void __flush_dcache_range(unsigned long start, unsigned long end);
-extern void flush_dcache_page(struct page *page);
-
-#define flush_icache_page(vma, pg)	do { } while(0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-
-extern void flush_ptrace_access(struct vm_area_struct *, struct page *,
-				unsigned long uaddr, void *kaddr,
-				unsigned long len, int write);
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
-	do {								\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
-		memcpy(dst, src, len);					\
-		flush_ptrace_access(vma, page, vaddr, src, len, 0);	\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) 		\
-	do {								\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
-		memcpy(dst, src, len);					\
-		flush_ptrace_access(vma, page, vaddr, dst, len, 1);	\
-	} while (0)
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-/* internal debugging function */
-void kernel_map_pages(struct page *page, int numpages, int enable);
-#endif
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _SPARC64_CACHEFLUSH_H */
diff --git a/include/asm-sparc64/chafsr.h b/include/asm-sparc64/chafsr.h
deleted file mode 100644
index 85c69b38220b..000000000000
--- a/include/asm-sparc64/chafsr.h
+++ /dev/null
@@ -1,241 +0,0 @@
-#ifndef _SPARC64_CHAFSR_H
-#define _SPARC64_CHAFSR_H
-
-/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
-
-/* Comments indicate which processor variants on which the bit definition
- * is valid.  Codes are:
- * ch	-->	cheetah
- * ch+	-->	cheetah plus
- * jp	-->	jalapeno
- */
-
-/* All bits of this register except M_SYNDROME and E_SYNDROME are
- * read, write 1 to clear.  M_SYNDROME and E_SYNDROME are read-only.
- */
-
-/* Software bit set by linux trap handlers to indicate that the trap was
- * signalled at %tl >= 1.
- */
-#define CHAFSR_TL1		(1UL << 63UL) /* n/a */
-
-/* Unmapped error from system bus for prefetch queue or
- * store queue read operation
- */
-#define CHPAFSR_DTO		(1UL << 59UL) /* ch+ */
-
-/* Bus error from system bus for prefetch queue or store queue
- * read operation
- */
-#define CHPAFSR_DBERR		(1UL << 58UL) /* ch+ */
-
-/* Hardware corrected E-cache Tag ECC error */
-#define CHPAFSR_THCE		(1UL << 57UL) /* ch+ */
-/* System interface protocol error, hw timeout caused */
-#define JPAFSR_JETO		(1UL << 57UL) /* jp */
-
-/* SW handled correctable E-cache Tag ECC error */
-#define CHPAFSR_TSCE		(1UL << 56UL) /* ch+ */
-/* Parity error on system snoop results */
-#define JPAFSR_SCE		(1UL << 56UL) /* jp */
-
-/* Uncorrectable E-cache Tag ECC error */
-#define CHPAFSR_TUE		(1UL << 55UL) /* ch+ */
-/* System interface protocol error, illegal command detected */
-#define JPAFSR_JEIC		(1UL << 55UL) /* jp */
-
-/* Uncorrectable system bus data ECC error due to prefetch
- * or store fill request
- */
-#define CHPAFSR_DUE		(1UL << 54UL) /* ch+ */
-/* System interface protocol error, illegal ADTYPE detected */
-#define JPAFSR_JEIT		(1UL << 54UL) /* jp */
-
-/* Multiple errors of the same type have occurred.  This bit is set when
- * an uncorrectable error or a SW correctable error occurs and the status
- * bit to report that error is already set.  When multiple errors of
- * different types are indicated by setting multiple status bits.
- *
- * This bit is not set if multiple HW corrected errors with the same
- * status bit occur, only uncorrectable and SW correctable ones have
- * this behavior.
- *
- * This bit is not set when multiple ECC errors happen within a single
- * 64-byte system bus transaction.  Only the first ECC error in a 16-byte
- * subunit will be logged.  All errors in subsequent 16-byte subunits
- * from the same 64-byte transaction are ignored.
- */
-#define CHAFSR_ME		(1UL << 53UL) /* ch,ch+,jp */
-
-/* Privileged state error has occurred.  This is a capture of PSTATE.PRIV
- * at the time the error is detected.
- */
-#define CHAFSR_PRIV		(1UL << 52UL) /* ch,ch+,jp */
-
-/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
- * bits and record the most recently detected errors.  Bits accumulate
- * errors that have been detected since the last write to clear the bit.
- */
-
-/* System interface protocol error.  The processor asserts its' ERROR
- * pin when this event occurs and it also logs a specific cause code
- * into a JTAG scannable flop.
- */
-#define CHAFSR_PERR		(1UL << 51UL) /* ch,ch+,jp */
-
-/* Internal processor error.  The processor asserts its' ERROR
- * pin when this event occurs and it also logs a specific cause code
- * into a JTAG scannable flop.
- */
-#define CHAFSR_IERR		(1UL << 50UL) /* ch,ch+,jp */
-
-/* System request parity error on incoming address */
-#define CHAFSR_ISAP		(1UL << 49UL) /* ch,ch+,jp */
-
-/* HW Corrected system bus MTAG ECC error */
-#define CHAFSR_EMC		(1UL << 48UL) /* ch,ch+ */
-/* Parity error on L2 cache tag SRAM */
-#define JPAFSR_ETP		(1UL << 48UL) /* jp */
-
-/* Uncorrectable system bus MTAG ECC error */
-#define CHAFSR_EMU		(1UL << 47UL) /* ch,ch+ */
-/* Out of range memory error has occurred */
-#define JPAFSR_OM		(1UL << 47UL) /* jp */
-
-/* HW Corrected system bus data ECC error for read of interrupt vector */
-#define CHAFSR_IVC		(1UL << 46UL) /* ch,ch+ */
-/* Error due to unsupported store */
-#define JPAFSR_UMS		(1UL << 46UL) /* jp */
-
-/* Uncorrectable system bus data ECC error for read of interrupt vector */
-#define CHAFSR_IVU		(1UL << 45UL) /* ch,ch+,jp */
-
-/* Unmapped error from system bus */
-#define CHAFSR_TO		(1UL << 44UL) /* ch,ch+,jp */
-
-/* Bus error response from system bus */
-#define CHAFSR_BERR		(1UL << 43UL) /* ch,ch+,jp */
-
-/* SW Correctable E-cache ECC error for instruction fetch or data access
- * other than block load.
- */
-#define CHAFSR_UCC		(1UL << 42UL) /* ch,ch+,jp */
-
-/* Uncorrectable E-cache ECC error for instruction fetch or data access
- * other than block load.
- */
-#define CHAFSR_UCU		(1UL << 41UL) /* ch,ch+,jp */
-
-/* Copyout HW Corrected ECC error */
-#define CHAFSR_CPC		(1UL << 40UL) /* ch,ch+,jp */
-
-/* Copyout Uncorrectable ECC error */
-#define CHAFSR_CPU		(1UL << 39UL) /* ch,ch+,jp */
-
-/* HW Corrected ECC error from E-cache for writeback */
-#define CHAFSR_WDC		(1UL << 38UL) /* ch,ch+,jp */
-
-/* Uncorrectable ECC error from E-cache for writeback */
-#define CHAFSR_WDU		(1UL << 37UL) /* ch,ch+,jp */
-
-/* HW Corrected ECC error from E-cache for store merge or block load */
-#define CHAFSR_EDC		(1UL << 36UL) /* ch,ch+,jp */
-
-/* Uncorrectable ECC error from E-cache for store merge or block load */
-#define CHAFSR_EDU		(1UL << 35UL) /* ch,ch+,jp */
-
-/* Uncorrectable system bus data ECC error for read of memory or I/O */
-#define CHAFSR_UE		(1UL << 34UL) /* ch,ch+,jp */
-
-/* HW Corrected system bus data ECC error for read of memory or I/O */
-#define CHAFSR_CE		(1UL << 33UL) /* ch,ch+,jp */
-
-/* Uncorrectable ECC error from remote cache/memory */
-#define JPAFSR_RUE		(1UL << 32UL) /* jp */
-
-/* Correctable ECC error from remote cache/memory */
-#define JPAFSR_RCE		(1UL << 31UL) /* jp */
-
-/* JBUS parity error on returned read data */
-#define JPAFSR_BP		(1UL << 30UL) /* jp */
-
-/* JBUS parity error on data for writeback or block store */
-#define JPAFSR_WBP		(1UL << 29UL) /* jp */
-
-/* Foreign read to DRAM incurring correctable ECC error */
-#define JPAFSR_FRC		(1UL << 28UL) /* jp */
-
-/* Foreign read to DRAM incurring uncorrectable ECC error */
-#define JPAFSR_FRU		(1UL << 27UL) /* jp */
-
-#define CHAFSR_ERRORS		(CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
-				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
-				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
-				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
-				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
-#define CHPAFSR_ERRORS		(CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
-				 CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
-				 CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
-				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
-				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
-				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
-				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
-#define JPAFSR_ERRORS		(JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
-				 JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
-				 CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
-				 JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
-				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
-				 CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
-				 CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
-				 CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
-				 JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
-				 JPAFSR_FRC | JPAFSR_FRU)
-
-/* Active JBUS request signal when error occurred */
-#define JPAFSR_JBREQ		(0x7UL << 24UL) /* jp */
-#define JPAFSR_JBREQ_SHIFT	24UL
-
-/* L2 cache way information */
-#define JPAFSR_ETW		(0x3UL << 22UL) /* jp */
-#define JPAFSR_ETW_SHIFT	22UL
-
-/* System bus MTAG ECC syndrome.  This field captures the status of the
- * first occurrence of the highest-priority error according to the M_SYND
- * overwrite policy.  After the AFSR sticky bit, corresponding to the error
- * for which the M_SYND is reported, is cleared, the contents of the M_SYND
- * field will be unchanged by will be unfrozen for further error capture.
- */
-#define CHAFSR_M_SYNDROME	(0xfUL << 16UL) /* ch,ch+,jp */
-#define CHAFSR_M_SYNDROME_SHIFT	16UL
-
-/* Agenid Id of the foreign device causing the UE/CE errors */
-#define JPAFSR_AID		(0x1fUL << 9UL) /* jp */
-#define JPAFSR_AID_SHIFT	9UL
-
-/* System bus or E-cache data ECC syndrome.  This field captures the status
- * of the first occurrence of the highest-priority error according to the
- * E_SYND overwrite policy.  After the AFSR sticky bit, corresponding to the
- * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
- * field will be unchanged but will be unfrozen for further error capture.
- */
-#define CHAFSR_E_SYNDROME	(0x1ffUL << 0UL) /* ch,ch+,jp */
-#define CHAFSR_E_SYNDROME_SHIFT	0UL
-
-/* The AFSR must be explicitly cleared by software, it is not cleared automatically
- * by a read.  Writes to bits <51:33> with bits set will clear the corresponding
- * bits in the AFSR.  Bits associated with disrupting traps must be cleared before
- * interrupts are re-enabled to prevent multiple traps for the same error.  I.e.
- * PSTATE.IE and AFSR bits control delivery of disrupting traps.
- *
- * Since there is only one AFAR, when multiple events have been logged by the
- * bits in the AFSR, at most one of these events will have its status captured
- * in the AFAR.  The highest priority of those event bits will get AFAR logging.
- * The AFAR will be unlocked and available to capture the address of another event
- * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
- * cleared.  For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
- * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
- * and ready for another event, even though AFSR.CE is still set.  The same rules
- * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
- */
-
-#endif /* _SPARC64_CHAFSR_H */
diff --git a/include/asm-sparc64/checksum.h b/include/asm-sparc64/checksum.h
deleted file mode 100644
index b290564c8ce0..000000000000
--- a/include/asm-sparc64/checksum.h
+++ /dev/null
@@ -1,167 +0,0 @@
-#ifndef __SPARC64_CHECKSUM_H
-#define __SPARC64_CHECKSUM_H
-
-/*  checksum.h:  IP/UDP/TCP checksum routines on the V9.
- *
- *  Copyright(C) 1995 Linus Torvalds
- *  Copyright(C) 1995 Miguel de Icaza
- *  Copyright(C) 1996 David S. Miller
- *  Copyright(C) 1996 Eddie C. Dost
- *  Copyright(C) 1997 Jakub Jelinek
- *
- * derived from:
- *	Alpha checksum c-code
- *      ix86 inline assembly
- *      RFC1071 Computing the Internet Checksum
- */
-
-#include <linux/in6.h>
-#include <asm/uaccess.h>
-
-/* computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void * buff, int len, __wsum sum);
-
-/* the same as csum_partial, but copies from user space while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
-					      int len, __wsum sum);
-
-extern long __csum_partial_copy_from_user(const void __user *src,
-					  void *dst, int len,
-					  __wsum sum);
-
-static inline __wsum
-csum_partial_copy_from_user(const void __user *src,
-			    void *dst, int len,
-			    __wsum sum, int *err)
-{
-	long ret = __csum_partial_copy_from_user(src, dst, len, sum);
-	if (ret < 0)
-		*err = -EFAULT;
-	return (__force __wsum) ret;
-}
-
-/* 
- *	Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-extern long __csum_partial_copy_to_user(const void *src,
-					void __user *dst, int len,
-					  __wsum sum);
-
-static inline __wsum
-csum_and_copy_to_user(const void *src,
-		      void __user *dst, int len,
-		      __wsum sum, int *err)
-{
-	long ret = __csum_partial_copy_to_user(src, dst, len, sum);
-	if (ret < 0)
-		*err = -EFAULT;
-	return (__force __wsum) ret;
-}
-
-/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
- * the majority of the time.
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/* Fold a partial checksum without adding pseudo headers. */
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp;
-
-	__asm__ __volatile__(
-"	addcc		%0, %1, %1\n"
-"	srl		%1, 16, %1\n"
-"	addc		%1, %%g0, %1\n"
-"	xnor		%%g0, %1, %0\n"
-	: "=&r" (sum), "=r" (tmp)
-	: "0" (sum), "1" ((__force u32)sum<<16)
-	: "cc");
-	return (__force __sum16)sum;
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					       unsigned int len,
-					       unsigned short proto,
-					       __wsum sum)
-{
-	__asm__ __volatile__(
-"	addcc		%1, %0, %0\n"
-"	addccc		%2, %0, %0\n"
-"	addccc		%3, %0, %0\n"
-"	addc		%0, %%g0, %0\n"
-	: "=r" (sum), "=r" (saddr)
-	: "r" (daddr), "r" (proto + len), "0" (sum), "1" (saddr)
-	: "cc");
-	return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
-{
-	__asm__ __volatile__ (
-"	addcc		%3, %4, %%g7\n"
-"	addccc		%5, %%g7, %%g7\n"
-"	lduw		[%2 + 0x0c], %%g2\n"
-"	lduw		[%2 + 0x08], %%g3\n"
-"	addccc		%%g2, %%g7, %%g7\n"
-"	lduw		[%2 + 0x04], %%g2\n"
-"	addccc		%%g3, %%g7, %%g7\n"
-"	lduw		[%2 + 0x00], %%g3\n"
-"	addccc		%%g2, %%g7, %%g7\n"
-"	lduw		[%1 + 0x0c], %%g2\n"
-"	addccc		%%g3, %%g7, %%g7\n"
-"	lduw		[%1 + 0x08], %%g3\n"
-"	addccc		%%g2, %%g7, %%g7\n"
-"	lduw		[%1 + 0x04], %%g2\n"
-"	addccc		%%g3, %%g7, %%g7\n"
-"	lduw		[%1 + 0x00], %%g3\n"
-"	addccc		%%g2, %%g7, %%g7\n"
-"	addccc		%%g3, %%g7, %0\n"
-"	addc		0, %0, %0\n"
-	: "=&r" (sum)
-	: "r" (saddr), "r" (daddr), "r"(htonl(len)),
-	  "r"(htonl(proto)), "r"(sum)
-	: "g2", "g3", "g7", "cc");
-
-	return csum_fold(sum);
-}
-
-/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#endif /* !(__SPARC64_CHECKSUM_H) */
diff --git a/include/asm-sparc64/chmctrl.h b/include/asm-sparc64/chmctrl.h
deleted file mode 100644
index 859b4a4b0d30..000000000000
--- a/include/asm-sparc64/chmctrl.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef _SPARC64_CHMCTRL_H
-#define _SPARC64_CHMCTRL_H
-
-/* Cheetah memory controller programmable registers. */
-#define CHMCTRL_TCTRL1		0x00 /* Memory Timing Control I		*/
-#define CHMCTRL_TCTRL2		0x08 /* Memory Timing Control II	*/
-#define CHMCTRL_TCTRL3		0x38 /* Memory Timing Control III	*/
-#define CHMCTRL_TCTRL4		0x40 /* Memory Timing Control IV	*/
-#define CHMCTRL_DECODE1		0x10 /* Memory Address Decode I		*/
-#define CHMCTRL_DECODE2		0x18 /* Memory Address Decode II	*/
-#define CHMCTRL_DECODE3		0x20 /* Memory Address Decode III	*/
-#define CHMCTRL_DECODE4		0x28 /* Memory Address Decode IV	*/
-#define CHMCTRL_MACTRL		0x30 /* Memory Address Control		*/
-
-/* Memory Timing Control I */
-#define TCTRL1_SDRAMCTL_DLY	0xf000000000000000UL
-#define TCTRL1_SDRAMCTL_DLY_SHIFT     60
-#define TCTRL1_SDRAMCLK_DLY	0x0e00000000000000UL
-#define TCTRL1_SDRAMCLK_DLY_SHIFT     57
-#define TCTRL1_R		0x0100000000000000UL
-#define TCTRL1_R_SHIFT 		      56
-#define TCTRL1_AUTORFR_CYCLE	0x00fe000000000000UL
-#define TCTRL1_AUTORFR_CYCLE_SHIFT    49
-#define TCTRL1_RD_WAIT		0x0001f00000000000UL
-#define TCTRL1_RD_WAIT_SHIFT	      44
-#define TCTRL1_PC_CYCLE		0x00000fc000000000UL
-#define TCTRL1_PC_CYCLE_SHIFT	      38
-#define TCTRL1_WR_MORE_RAS_PW	0x0000003f00000000UL
-#define TCTRL1_WR_MORE_RAS_PW_SHIFT   32
-#define TCTRL1_RD_MORE_RAW_PW	0x00000000fc000000UL
-#define TCTRL1_RD_MORE_RAS_PW_SHIFT   26
-#define TCTRL1_ACT_WR_DLY	0x0000000003f00000UL
-#define TCTRL1_ACT_WR_DLY_SHIFT	      20
-#define TCTRL1_ACT_RD_DLY	0x00000000000fc000UL
-#define TCTRL1_ACT_RD_DLY_SHIFT	      14
-#define TCTRL1_BANK_PRESENT	0x0000000000003000UL
-#define TCTRL1_BANK_PRESENT_SHIFT     12
-#define TCTRL1_RFR_INT		0x0000000000000ff8UL
-#define TCTRL1_RFR_INT_SHIFT	      3
-#define TCTRL1_SET_MODE_REG	0x0000000000000004UL
-#define TCTRL1_SET_MODE_REG_SHIFT     2
-#define TCTRL1_RFR_ENABLE	0x0000000000000002UL
-#define TCTRL1_RFR_ENABLE_SHIFT	      1
-#define TCTRL1_PRECHG_ALL	0x0000000000000001UL
-#define TCTRL1_PRECHG_ALL_SHIFT	      0
-
-/* Memory Timing Control II */
-#define TCTRL2_WR_MSEL_DLY	0xfc00000000000000UL
-#define TCTRL2_WR_MSEL_DLY_SHIFT      58
-#define TCTRL2_RD_MSEL_DLY	0x03f0000000000000UL
-#define TCTRL2_RD_MSEL_DLY_SHIFT      52
-#define TCTRL2_WRDATA_THLD	0x000c000000000000UL
-#define TCTRL2_WRDATA_THLD_SHIFT      50
-#define TCTRL2_RDWR_RD_TI_DLY	0x0003f00000000000UL
-#define TCTRL2_RDWR_RD_TI_DLY_SHIFT   44
-#define TCTRL2_AUTOPRECHG_ENBL	0x0000080000000000UL
-#define TCTRL2_AUTOPRECHG_ENBL_SHIFT  43
-#define TCTRL2_RDWR_PI_MORE_DLY	0x000007c000000000UL
-#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
-#define TCTRL2_RDWR_1_DLY	0x0000003f00000000UL
-#define TCTRL2_RDWR_1_DLY_SHIFT       32
-#define TCTRL2_WRWR_PI_MORE_DLY	0x00000000f8000000UL
-#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
-#define TCTRL2_WRWR_1_DLY	0x0000000007e00000UL
-#define TCTRL2_WRWR_1_DLY_SHIFT       21
-#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
-#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
-#define TCTRL2_R		0x0000000000008000UL
-#define TCTRL2_R_SHIFT		      15
-#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
-#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
-
-/* Memory Timing Control III */
-#define TCTRL3_SDRAM_CTL_DLY	0xf000000000000000UL
-#define TCTRL3_SDRAM_CTL_DLY_SHIFT    60
-#define TCTRL3_SDRAM_CLK_DLY	0x0e00000000000000UL
-#define TCTRL3_SDRAM_CLK_DLY_SHIFT    57
-#define TCTRL3_R		0x0100000000000000UL
-#define TCTRL3_R_SHIFT		      56
-#define TCTRL3_AUTO_RFR_CYCLE	0x00fe000000000000UL
-#define TCTRL3_AUTO_RFR_CYCLE_SHIFT   49
-#define TCTRL3_RD_WAIT		0x0001f00000000000UL
-#define TCTRL3_RD_WAIT_SHIFT	      44
-#define TCTRL3_PC_CYCLE		0x00000fc000000000UL
-#define TCTRL3_PC_CYCLE_SHIFT	      38
-#define TCTRL3_WR_MORE_RAW_PW	0x0000003f00000000UL
-#define TCTRL3_WR_MORE_RAW_PW_SHIFT   32
-#define TCTRL3_RD_MORE_RAW_PW	0x00000000fc000000UL
-#define TCTRL3_RD_MORE_RAW_PW_SHIFT   26
-#define TCTRL3_ACT_WR_DLY	0x0000000003f00000UL
-#define TCTRL3_ACT_WR_DLY_SHIFT       20
-#define TCTRL3_ACT_RD_DLY	0x00000000000fc000UL
-#define TCTRL3_ACT_RD_DLY_SHIFT       14
-#define TCTRL3_BANK_PRESENT	0x0000000000003000UL
-#define TCTRL3_BANK_PRESENT_SHIFT     12
-#define TCTRL3_RFR_INT		0x0000000000000ff8UL
-#define TCTRL3_RFR_INT_SHIFT	      3
-#define TCTRL3_SET_MODE_REG	0x0000000000000004UL
-#define TCTRL3_SET_MODE_REG_SHIFT     2
-#define TCTRL3_RFR_ENABLE	0x0000000000000002UL
-#define TCTRL3_RFR_ENABLE_SHIFT       1
-#define TCTRL3_PRECHG_ALL	0x0000000000000001UL
-#define TCTRL3_PRECHG_ALL_SHIFT	      0
-
-/* Memory Timing Control IV */
-#define TCTRL4_WR_MSEL_DLY	0xfc00000000000000UL
-#define TCTRL4_WR_MSEL_DLY_SHIFT      58
-#define TCTRL4_RD_MSEL_DLY	0x03f0000000000000UL
-#define TCTRL4_RD_MSEL_DLY_SHIFT      52
-#define TCTRL4_WRDATA_THLD	0x000c000000000000UL
-#define TCTRL4_WRDATA_THLD_SHIFT      50
-#define TCTRL4_RDWR_RD_RI_DLY	0x0003f00000000000UL
-#define TCTRL4_RDWR_RD_RI_DLY_SHIFT   44
-#define TCTRL4_AUTO_PRECHG_ENBL	0x0000080000000000UL
-#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
-#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
-#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
-#define TCTRL4_RD_WR_TI_DLY	0x0000003f00000000UL
-#define TCTRL4_RD_WR_TI_DLY_SHIFT     32
-#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
-#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
-#define TCTRL4_WR_WR_TI_DLY	0x0000000007e00000UL
-#define TCTRL4_WR_WR_TI_DLY_SHIFT     21
-#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
-#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
-#define TCTRL4_R		0x0000000000008000UL
-#define TCTRL4_R_SHIFT		      15
-#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
-#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
-
-/* All 4 memory address decoding registers have the
- * same layout.
- */
-#define MEM_DECODE_VALID	0x8000000000000000UL /* Valid */
-#define MEM_DECODE_VALID_SHIFT	      63
-#define MEM_DECODE_UK		0x001ffe0000000000UL /* Upper mask */
-#define MEM_DECODE_UK_SHIFT	      41
-#define MEM_DECODE_UM		0x0000001ffff00000UL /* Upper match */
-#define MEM_DECODE_UM_SHIFT	      20
-#define MEM_DECODE_LK		0x000000000003c000UL /* Lower mask */
-#define MEM_DECODE_LK_SHIFT	      14
-#define MEM_DECODE_LM		0x0000000000000f00UL /* Lower match */
-#define MEM_DECODE_LM_SHIFT           8
-
-#define PA_UPPER_BITS		0x000007fffc000000UL
-#define PA_UPPER_BITS_SHIFT	26
-#define PA_LOWER_BITS		0x00000000000003c0UL
-#define PA_LOWER_BITS_SHIFT	6
-
-#define MACTRL_R0		         0x8000000000000000UL
-#define MACTRL_R0_SHIFT		         63
-#define MACTRL_ADDR_LE_PW                0x7000000000000000UL
-#define MACTRL_ADDR_LE_PW_SHIFT		 60
-#define MACTRL_CMD_PW                    0x0f00000000000000UL
-#define MACTRL_CMD_PW_SHIFT		 56
-#define MACTRL_HALF_MODE_WR_MSEL_DLY     0x00fc000000000000UL
-#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
-#define MACTRL_HALF_MODE_RD_MSEL_DLY     0x0003f00000000000UL
-#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
-#define MACTRL_HALF_MODE_SDRAM_CTL_DLY   0x00000f0000000000UL
-#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
-#define MACTRL_HALF_MODE_SDRAM_CLK_DLY   0x000000e000000000UL
-#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
-#define MACTRL_R1                        0x0000001000000000UL
-#define MACTRL_R1_SHIFT                      36
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
-#define MACTRL_ENC_INTLV_B3              0x00000000f8000000UL
-#define MACTRL_ENC_INTLV_B3_SHIFT              27
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
-#define MACTRL_ENC_INTLV_B2              0x00000000007c0000UL
-#define MACTRL_ENC_INTLV_B2_SHIFT              18
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
-#define MACTRL_ENC_INTLV_B1              0x0000000000003e00UL
-#define MACTRL_ENC_INTLV_B1_SHIFT               9
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
-#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT  5
-#define MACTRL_ENC_INTLV_B0              0x000000000000001fUL
-#define MACTRL_ENC_INTLV_B0_SHIFT               0
-
-#endif /* _SPARC64_CHMCTRL_H */
diff --git a/include/asm-sparc64/cmt.h b/include/asm-sparc64/cmt.h
deleted file mode 100644
index 870db5928577..000000000000
--- a/include/asm-sparc64/cmt.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID		0x0000000000000010UL
-#define  LP_ID_MAX	0x00000000003f0000UL
-#define  LP_ID_ID	0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID	0x0000000000000000UL
-#define  LP_INTR_ID_ID	0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID		0x0000000000000040UL
-#define  CESR_ID_ID	0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL	0x0000000000000000UL
-#define  LP_AVAIL_1	0x0000000000000002UL
-#define  LP_AVAIL_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT	0x0000000000000010UL
-#define  LP_ENAB_STAT_1	0x0000000000000002UL
-#define  LP_ENAB_STAT_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB		0x0000000000000020UL
-#define  LP_ENAB_1	0x0000000000000002UL
-#define  LP_ENAB_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW	0x0000000000000050UL
-#define LP_RUNNING_W1S	0x0000000000000060UL
-#define LP_RUNNING_W1C	0x0000000000000068UL
-#define  LP_RUNNING_1	0x0000000000000002UL
-#define  LP_RUNNING_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT	0x0000000000000058UL
-#define  LP_RUN_STAT_1	0x0000000000000002UL
-#define  LP_RUN_STAT_0	0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER	0x0000000000000030UL
-#define  LP_XIR_STEER_1	0x0000000000000002UL
-#define  LP_XIR_STEER_0	0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER	0x0000000000000040UL
-#define  CMT_ER_STEER_1	0x0000000000000002UL
-#define  CMT_ER_STEER_0	0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */
diff --git a/include/asm-sparc64/compat.h b/include/asm-sparc64/compat.h
deleted file mode 100644
index f260b58f5ce9..000000000000
--- a/include/asm-sparc64/compat.h
+++ /dev/null
@@ -1,243 +0,0 @@
-#ifndef _ASM_SPARC64_COMPAT_H
-#define _ASM_SPARC64_COMPAT_H
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-
-#define COMPAT_USER_HZ	100
-
-typedef u32		compat_size_t;
-typedef s32		compat_ssize_t;
-typedef s32		compat_time_t;
-typedef s32		compat_clock_t;
-typedef s32		compat_pid_t;
-typedef u16		__compat_uid_t;
-typedef u16		__compat_gid_t;
-typedef u32		__compat_uid32_t;
-typedef u32		__compat_gid32_t;
-typedef u16		compat_mode_t;
-typedef u32		compat_ino_t;
-typedef u16		compat_dev_t;
-typedef s32		compat_off_t;
-typedef s64		compat_loff_t;
-typedef s16		compat_nlink_t;
-typedef u16		compat_ipc_pid_t;
-typedef s32		compat_daddr_t;
-typedef u32		compat_caddr_t;
-typedef __kernel_fsid_t	compat_fsid_t;
-typedef s32		compat_key_t;
-typedef s32		compat_timer_t;
-
-typedef s32		compat_int_t;
-typedef s32		compat_long_t;
-typedef s64		compat_s64;
-typedef u32		compat_uint_t;
-typedef u32		compat_ulong_t;
-typedef u64		compat_u64;
-
-struct compat_timespec {
-	compat_time_t	tv_sec;
-	s32		tv_nsec;
-};
-
-struct compat_timeval {
-	compat_time_t	tv_sec;
-	s32		tv_usec;
-};
-
-struct compat_stat {
-	compat_dev_t	st_dev;
-	compat_ino_t	st_ino;
-	compat_mode_t	st_mode;
-	compat_nlink_t	st_nlink;
-	__compat_uid_t	st_uid;
-	__compat_gid_t	st_gid;
-	compat_dev_t	st_rdev;
-	compat_off_t	st_size;
-	compat_time_t	st_atime;
-	compat_ulong_t	st_atime_nsec;
-	compat_time_t	st_mtime;
-	compat_ulong_t	st_mtime_nsec;
-	compat_time_t	st_ctime;
-	compat_ulong_t	st_ctime_nsec;
-	compat_off_t	st_blksize;
-	compat_off_t	st_blocks;
-	u32		__unused4[2];
-};
-
-struct compat_stat64 {
-	unsigned long long	st_dev;
-
-	unsigned long long	st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-
-	unsigned long long	st_rdev;
-
-	unsigned char	__pad3[8];
-
-	long long	st_size;
-	unsigned int	st_blksize;
-
-	unsigned char	__pad4[8];
-	unsigned int	st_blocks;
-
-	unsigned int	st_atime;
-	unsigned int	st_atime_nsec;
-
-	unsigned int	st_mtime;
-	unsigned int	st_mtime_nsec;
-
-	unsigned int	st_ctime;
-	unsigned int	st_ctime_nsec;
-
-	unsigned int	__unused4;
-	unsigned int	__unused5;
-};
-
-struct compat_flock {
-	short		l_type;
-	short		l_whence;
-	compat_off_t	l_start;
-	compat_off_t	l_len;
-	compat_pid_t	l_pid;
-	short		__unused;
-};
-
-#define F_GETLK64	12
-#define F_SETLK64	13
-#define F_SETLKW64	14
-
-struct compat_flock64 {
-	short		l_type;
-	short		l_whence;
-	compat_loff_t	l_start;
-	compat_loff_t	l_len;
-	compat_pid_t	l_pid;
-	short		__unused;
-};
-
-struct compat_statfs {
-	int		f_type;
-	int		f_bsize;
-	int		f_blocks;
-	int		f_bfree;
-	int		f_bavail;
-	int		f_files;
-	int		f_ffree;
-	compat_fsid_t	f_fsid;
-	int		f_namelen;	/* SunOS ignores this field. */
-	int		f_frsize;
-	int		f_spare[5];
-};
-
-#define COMPAT_RLIM_INFINITY 0x7fffffff
-
-typedef u32		compat_old_sigset_t;
-
-#define _COMPAT_NSIG		64
-#define _COMPAT_NSIG_BPW	32
-
-typedef u32		compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX	0x7fffffff
-#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
-
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately converted them already.
- */
-typedef	u32		compat_uptr_t;
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
-	return (void __user *)(unsigned long)uptr;
-}
-
-static inline compat_uptr_t ptr_to_compat(void __user *uptr)
-{
-	return (u32)(unsigned long)uptr;
-}
-
-static inline void __user *compat_alloc_user_space(long len)
-{
-	struct pt_regs *regs = current_thread_info()->kregs;
-	unsigned long usp = regs->u_regs[UREG_I6];
-
-	if (!(test_thread_flag(TIF_32BIT)))
-		usp += STACK_BIAS;
-	else
-		usp &= 0xffffffffUL;
-
-	usp -= len;
-	usp &= ~0x7UL;
-
-	return (void __user *) usp;
-}
-
-struct compat_ipc64_perm {
-	compat_key_t key;
-	__compat_uid32_t uid;
-	__compat_gid32_t gid;
-	__compat_uid32_t cuid;
-	__compat_gid32_t cgid;
-	unsigned short __pad1;
-	compat_mode_t mode;
-	unsigned short __pad2;
-	unsigned short seq;
-	unsigned long __unused1;	/* yes they really are 64bit pads */
-	unsigned long __unused2;
-};
-
-struct compat_semid64_ds {
-	struct compat_ipc64_perm sem_perm;
-	unsigned int	__pad1;
-	compat_time_t	sem_otime;
-	unsigned int	__pad2;
-	compat_time_t	sem_ctime;
-	u32		sem_nsems;
-	u32		__unused1;
-	u32		__unused2;
-};
-
-struct compat_msqid64_ds {
-	struct compat_ipc64_perm msg_perm;
-	unsigned int	__pad1;
-	compat_time_t	msg_stime;
-	unsigned int	__pad2;
-	compat_time_t	msg_rtime;
-	unsigned int	__pad3;
-	compat_time_t	msg_ctime;
-	unsigned int	msg_cbytes;
-	unsigned int	msg_qnum;
-	unsigned int	msg_qbytes;
-	compat_pid_t	msg_lspid;
-	compat_pid_t	msg_lrpid;
-	unsigned int	__unused1;
-	unsigned int	__unused2;
-};
-
-struct compat_shmid64_ds {
-	struct compat_ipc64_perm shm_perm;
-	unsigned int	__pad1;
-	compat_time_t	shm_atime;
-	unsigned int	__pad2;
-	compat_time_t	shm_dtime;
-	unsigned int	__pad3;
-	compat_time_t	shm_ctime;
-	compat_size_t	shm_segsz;
-	compat_pid_t	shm_cpid;
-	compat_pid_t	shm_lpid;
-	unsigned int	shm_nattch;
-	unsigned int	__unused1;
-	unsigned int	__unused2;
-};
-
-#endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/include/asm-sparc64/compat_signal.h b/include/asm-sparc64/compat_signal.h
deleted file mode 100644
index b759eab9b51c..000000000000
--- a/include/asm-sparc64/compat_signal.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _COMPAT_SIGNAL_H
-#define _COMPAT_SIGNAL_H
-
-#include <linux/compat.h>
-#include <asm/signal.h>
-
-#ifdef CONFIG_COMPAT
-struct __new_sigaction32 {
-	unsigned		sa_handler;
-	unsigned int    	sa_flags;
-	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
-	compat_sigset_t 	sa_mask;
-};
-
-struct __old_sigaction32 {
-	unsigned		sa_handler;
-	compat_old_sigset_t  	sa_mask;
-	unsigned int    	sa_flags;
-	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
-};
-
-typedef struct sigaltstack32 {
-	u32			ss_sp;
-	int			ss_flags;
-	compat_size_t		ss_size;
-} stack_t32;
-#endif
-
-#endif /* !(_COMPAT_SIGNAL_H) */
diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
deleted file mode 100644
index 532975ecfe10..000000000000
--- a/include/asm-sparc64/cpudata.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* cpudata.h: Per-cpu parameters.
- *
- * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_CPUDATA_H
-#define _SPARC64_CPUDATA_H
-
-#include <asm/hypervisor.h>
-#include <asm/asi.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/percpu.h>
-#include <linux/threads.h>
-
-typedef struct {
-	/* Dcache line 1 */
-	unsigned int	__softirq_pending; /* must be 1st, see rtrap.S */
-	unsigned int	__pad0;
-	unsigned long	clock_tick;	/* %tick's per second */
-	unsigned long	__pad;
-	unsigned int	__pad1;
-	unsigned int	__pad2;
-
-	/* Dcache line 2, rarely used */
-	unsigned int	dcache_size;
-	unsigned int	dcache_line_size;
-	unsigned int	icache_size;
-	unsigned int	icache_line_size;
-	unsigned int	ecache_size;
-	unsigned int	ecache_line_size;
-	int		core_id;
-	int		proc_id;
-} cpuinfo_sparc;
-
-DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
-#define cpu_data(__cpu)		per_cpu(__cpu_data, (__cpu))
-#define local_cpu_data()	__get_cpu_var(__cpu_data)
-
-/* Trap handling code needs to get at a few critical values upon
- * trap entry and to process TSB misses.  These cannot be in the
- * per_cpu() area as we really need to lock them into the TLB and
- * thus make them part of the main kernel image.  As a result we
- * try to make this as small as possible.
- *
- * This is padded out and aligned to 64-bytes to avoid false sharing
- * on SMP.
- */
-
-/* If you modify the size of this structure, please update
- * TRAP_BLOCK_SZ_SHIFT below.
- */
-struct thread_info;
-struct trap_per_cpu {
-/* D-cache line 1: Basic thread information, cpu and device mondo queues */
-	struct thread_info	*thread;
-	unsigned long		pgd_paddr;
-	unsigned long		cpu_mondo_pa;
-	unsigned long		dev_mondo_pa;
-
-/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
-	unsigned long		resum_mondo_pa;
-	unsigned long		resum_kernel_buf_pa;
-	unsigned long		nonresum_mondo_pa;
-	unsigned long		nonresum_kernel_buf_pa;
-
-/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
-	struct hv_fault_status	fault_info;
-
-/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
-	unsigned long		cpu_mondo_block_pa;
-	unsigned long		cpu_list_pa;
-	unsigned long		tsb_huge;
-	unsigned long		tsb_huge_temp;
-
-/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
-	unsigned long		irq_worklist_pa;
-	unsigned int		cpu_mondo_qmask;
-	unsigned int		dev_mondo_qmask;
-	unsigned int		resum_qmask;
-	unsigned int		nonresum_qmask;
-	void			*hdesc;
-} __attribute__((aligned(64)));
-extern struct trap_per_cpu trap_block[NR_CPUS];
-extern void init_cur_cpu_trap(struct thread_info *);
-extern void setup_tba(void);
-extern int ncpus_probed;
-extern void __init cpu_probe(void);
-extern const struct seq_operations cpuinfo_op;
-
-extern unsigned long real_hard_smp_processor_id(void);
-
-struct cpuid_patch_entry {
-	unsigned int	addr;
-	unsigned int	cheetah_safari[4];
-	unsigned int	cheetah_jbus[4];
-	unsigned int	starfire[4];
-	unsigned int	sun4v[4];
-};
-extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
-
-struct sun4v_1insn_patch_entry {
-	unsigned int	addr;
-	unsigned int	insn;
-};
-extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
-	__sun4v_1insn_patch_end;
-
-struct sun4v_2insn_patch_entry {
-	unsigned int	addr;
-	unsigned int	insns[2];
-};
-extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
-	__sun4v_2insn_patch_end;
-
-#endif /* !(__ASSEMBLY__) */
-
-#define TRAP_PER_CPU_THREAD		0x00
-#define TRAP_PER_CPU_PGD_PADDR		0x08
-#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
-#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
-#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
-#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
-#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
-#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
-#define TRAP_PER_CPU_FAULT_INFO		0x40
-#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
-#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
-#define TRAP_PER_CPU_TSB_HUGE		0xd0
-#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
-#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
-#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
-#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
-#define TRAP_PER_CPU_RESUM_QMASK	0xf0
-#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
-
-#define TRAP_BLOCK_SZ_SHIFT		8
-
-#include <asm/scratchpad.h>
-
-#define __GET_CPUID(REG)				\
-	/* Spitfire implementation (default). */	\
-661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	 and		REG, 0x1f, REG;			\
-	nop;						\
-	.section	.cpuid_patch, "ax";		\
-	/* Instruction location. */			\
-	.word		661b;				\
-	/* Cheetah Safari implementation. */		\
-	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	and		REG, 0x3ff, REG;		\
-	nop;						\
-	/* Cheetah JBUS implementation. */		\
-	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
-	srlx		REG, 17, REG;			\
-	and		REG, 0x1f, REG;			\
-	nop;						\
-	/* Starfire implementation. */			\
-	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
-	sllx		REG, 9, REG;			\
-	or		REG, 0xd0, REG;			\
-	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
-	/* sun4v implementation. */			\
-	mov		SCRATCHPAD_CPUID, REG;		\
-	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
-	nop;						\
-	nop;						\
-	.previous;
-
-#ifdef CONFIG_SMP
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	__GET_CPUID(TMP)			\
-	sethi	%hi(trap_block), DEST;		\
-	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
-	or	DEST, %lo(trap_block), DEST;	\
-	add	DEST, TMP, DEST;		\
-
-/* Clobbers TMP, current address space PGD phys address into DEST.  */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
-#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
-
-/* Clobbers TMP, loads DEST with current thread info pointer.  */
-#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* Given the current thread info pointer in THR, load the per-cpu
- * area base of the current processor into DEST.  REG1, REG2, and REG3 are
- * clobbered.
- *
- * You absolutely cannot use DEST as a temporary in this code.  The
- * reason is that traps can happen during execution, and return from
- * trap will load the fully resolved DEST per-cpu base.  This can corrupt
- * the calculations done by the macro mid-stream.
- */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
-	lduh	[THR + TI_CPU], REG1;			\
-	sethi	%hi(__per_cpu_shift), REG3;		\
-	sethi	%hi(__per_cpu_base), REG2;		\
-	ldx	[REG3 + %lo(__per_cpu_shift)], REG3;	\
-	ldx	[REG2 + %lo(__per_cpu_base)], REG2;	\
-	sllx	REG1, REG3, REG3;			\
-	add	REG3, REG2, DEST;
-
-#else
-
-#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	sethi	%hi(trap_block), DEST;		\
-	or	DEST, %lo(trap_block), DEST;	\
-
-/* Uniprocessor versions, we know the cpuid is zero.  */
-#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
-
-/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
-#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
-
-#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
-	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
-	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
-
-/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
-#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
-
-#endif /* !(CONFIG_SMP) */
-
-#endif /* _SPARC64_CPUDATA_H */
diff --git a/include/asm-sparc64/cputime.h b/include/asm-sparc64/cputime.h
deleted file mode 100644
index 435f37a92f7c..000000000000
--- a/include/asm-sparc64/cputime.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/cputime.h>
diff --git a/include/asm-sparc64/current.h b/include/asm-sparc64/current.h
deleted file mode 100644
index a7904a7f53a8..000000000000
--- a/include/asm-sparc64/current.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/current.h>
diff --git a/include/asm-sparc64/dcr.h b/include/asm-sparc64/dcr.h
deleted file mode 100644
index 620c9ba642e9..000000000000
--- a/include/asm-sparc64/dcr.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _SPARC64_DCR_H
-#define _SPARC64_DCR_H
-
-/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
-#define DCR_DPE		0x0000000000001000 /* III+: D$ Parity Error Enable	*/
-#define DCR_OBS		0x0000000000000fc0 /* Observability Bus Controls	*/
-#define DCR_BPE		0x0000000000000020 /* Branch Predict Enable		*/
-#define DCR_RPE		0x0000000000000010 /* Return Address Prediction Enable	*/
-#define DCR_SI		0x0000000000000008 /* Single Instruction Disable	*/
-#define DCR_IPE		0x0000000000000004 /* III+: I$ Parity Error Enable	*/
-#define DCR_IFPOE	0x0000000000000002 /* IRQ FP Operation Enable		*/
-#define DCR_MS		0x0000000000000001 /* Multi-Scalar dispatch		*/
-
-#endif /* _SPARC64_DCR_H */
diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h
deleted file mode 100644
index 0f704e106a1b..000000000000
--- a/include/asm-sparc64/dcu.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _SPARC64_DCU_H
-#define _SPARC64_DCU_H
-
-#include <linux/const.h>
-
-/* UltraSparc-III Data Cache Unit Control Register */
-#define DCU_CP	_AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu	*/
-#define DCU_CV	_AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu	*/
-#define DCU_ME	_AC(0x0000800000000000,UL) /* NC-store Merging Enable	*/
-#define DCU_RE	_AC(0x0000400000000000,UL) /* RAW bypass Enable		*/
-#define DCU_PE	_AC(0x0000200000000000,UL) /* PCache Enable		*/
-#define DCU_HPE	_AC(0x0000100000000000,UL) /* HW prefetch Enable	*/
-#define DCU_SPE	_AC(0x0000080000000000,UL) /* SW prefetch Enable	*/
-#define DCU_SL	_AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
-#define DCU_WE	_AC(0x0000020000000000,UL) /* WCache enable		*/
-#define DCU_PM	_AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask	*/
-#define DCU_VM	_AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask	*/
-#define DCU_PR	_AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable	*/
-#define DCU_PW	_AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
-#define DCU_VR	_AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable	*/
-#define DCU_VW	_AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
-#define DCU_DM	_AC(0x0000000000000008,UL) /* DMMU Enable		*/
-#define DCU_IM	_AC(0x0000000000000004,UL) /* IMMU Enable		*/
-#define DCU_DC	_AC(0x0000000000000002,UL) /* Data Cache Enable		*/
-#define DCU_IC	_AC(0x0000000000000001,UL) /* Instruction Cache Enable	*/
-
-#endif /* _SPARC64_DCU_H */
diff --git a/include/asm-sparc64/delay.h b/include/asm-sparc64/delay.h
deleted file mode 100644
index a77aa622d762..000000000000
--- a/include/asm-sparc64/delay.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* delay.h: Linux delay routines on sparc64.
- *
- * Copyright (C) 1996, 2004, 2007 David S. Miller (davem@davemloft.net).
- */
-
-#ifndef _SPARC64_DELAY_H
-#define _SPARC64_DELAY_H
-
-#ifndef __ASSEMBLY__
-
-extern void __delay(unsigned long loops);
-extern void udelay(unsigned long usecs);
-#define mdelay(n)	udelay((n) * 1000)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _SPARC64_DELAY_H */
diff --git a/include/asm-sparc64/device.h b/include/asm-sparc64/device.h
deleted file mode 100644
index 4145c47097e2..000000000000
--- a/include/asm-sparc64/device.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/device.h>
diff --git a/include/asm-sparc64/display7seg.h b/include/asm-sparc64/display7seg.h
deleted file mode 100644
index c066a8964eab..000000000000
--- a/include/asm-sparc64/display7seg.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *
- * display7seg - Driver interface for the 7-segment display
- * present on Sun Microsystems CP1400 and CP1500
- *
- * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
- *
- */
-
-#ifndef __display7seg_h__
-#define __display7seg_h__
-
-#define D7S_IOC	'p'
-
-#define D7SIOCRD _IOR(D7S_IOC, 0x45, int)	/* Read device state	*/
-#define D7SIOCWR _IOW(D7S_IOC, 0x46, int)	/* Write device state	*/
-#define D7SIOCTM _IO (D7S_IOC, 0x47)		/* Translate mode (FLIP)*/
-
-/*
- * ioctl flag definitions
- *
- * POINT	- Toggle decimal point	(0=absent 1=present)
- * ALARM	- Toggle alarm LED 		(0=green  1=red)
- * FLIP		- Toggle inverted mode 	(0=normal 1=flipped) 
- * bits 0-4	- Character displayed	(see definitions below)
- *
- * Display segments are defined as follows, 
- * subject to D7S_FLIP register state:
- *
- *    a
- *   ---
- * f|   |b
- *   -g-
- * e|   |c
- *   ---
- *    d
- */
-
-#define D7S_POINT	(1 << 7)	/* Decimal point*/
-#define D7S_ALARM	(1 << 6)	/* Alarm LED 	*/
-#define D7S_FLIP	(1 << 5)	/* Flip display */
-
-#define D7S_0		0x00		/* Numerals 0-9 */
-#define D7S_1		0x01
-#define D7S_2		0x02
-#define D7S_3		0x03
-#define D7S_4		0x04
-#define D7S_5		0x05
-#define D7S_6		0x06
-#define D7S_7		0x07
-#define D7S_8		0x08
-#define D7S_9		0x09
-#define D7S_A		0x0A		/* Letters A-F, H, L, P */
-#define D7S_B		0x0B
-#define D7S_C		0x0C
-#define D7S_D		0x0D
-#define D7S_E		0x0E
-#define D7S_F		0x0F
-#define D7S_H		0x10
-#define D7S_E2		0x11
-#define D7S_L		0x12
-#define D7S_P		0x13
-#define D7S_SEGA	0x14		/* Individual segments */
-#define D7S_SEGB	0x15
-#define D7S_SEGC	0x16
-#define D7S_SEGD	0x17
-#define D7S_SEGE	0x18
-#define D7S_SEGF	0x19
-#define D7S_SEGG	0x1A
-#define D7S_SEGABFG 0x1B		/* Segment groupings */
-#define D7S_SEGCDEG	0x1C
-#define D7S_SEGBCEF 0x1D
-#define D7S_SEGADG	0x1E
-#define D7S_BLANK	0x1F		/* Clear all segments */
-
-#define D7S_MIN_VAL	0x0
-#define D7S_MAX_VAL	0x1F
-
-#endif /* ifndef __display7seg_h__ */
diff --git a/include/asm-sparc64/div64.h b/include/asm-sparc64/div64.h
deleted file mode 100644
index 928c94f99ecf..000000000000
--- a/include/asm-sparc64/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/div64.h>
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
deleted file mode 100644
index 38cbec76a33f..000000000000
--- a/include/asm-sparc64/dma-mapping.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef _ASM_SPARC64_DMA_MAPPING_H
-#define _ASM_SPARC64_DMA_MAPPING_H
-
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
-
-#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
-
-struct dma_ops {
-	void *(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void (*free_coherent)(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t dma_handle);
-	dma_addr_t (*map_single)(struct device *dev, void *cpu_addr,
-				 size_t size,
-				 enum dma_data_direction direction);
-	void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
-			     size_t size,
-			     enum dma_data_direction direction);
-	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
-	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
-			 int nhwentries,
-			 enum dma_data_direction direction);
-	void (*sync_single_for_cpu)(struct device *dev,
-				    dma_addr_t dma_handle, size_t size,
-				    enum dma_data_direction direction);
-	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
-				int nelems,
-				enum dma_data_direction direction);
-};
-extern const struct dma_ops *dma_ops;
-
-extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
-
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle)
-{
-	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	return dma_ops->map_single(dev, cpu_addr, size, direction);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_ops->unmap_single(dev, dma_addr, size, direction);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_ops->map_single(dev, page_address(page) + offset,
-				   size, direction);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_ops->unmap_single(dev, dma_address, size, direction);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_ops->map_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
-{
-	dma_ops->unmap_sg(dev, sg, nents, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction direction)
-{
-	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction direction)
-{
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction direction)
-{
-	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline int dma_mapping_error(dma_addr_t dma_addr)
-{
-	return (dma_addr == DMA_ERROR_CODE);
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	/* no easy way to get cache size on all processors, so return
-	 * the maximum possible, to be safe */
-	return (1 << INTERNODE_CACHE_SHIFT);
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h)	(1)
-
-#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h
deleted file mode 100644
index 9d4c024bd3b3..000000000000
--- a/include/asm-sparc64/dma.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * include/asm-sparc64/dma.h
- *
- * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _ASM_SPARC64_DMA_H
-#define _ASM_SPARC64_DMA_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-
-#include <asm/sbus.h>
-#include <asm/delay.h>
-#include <asm/oplib.h>
-
-/* These are irrelevant for Sparc DMA, but we leave it in so that
- * things can compile.
- */
-#define MAX_DMA_CHANNELS 8
-#define DMA_MODE_READ    1
-#define DMA_MODE_WRITE   2
-#define MAX_DMA_ADDRESS  (~0UL)
-
-/* Useful constants */
-#define SIZE_16MB      (16*1024*1024)
-#define SIZE_64K       (64*1024)
-
-/* SBUS DMA controller reg offsets */
-#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
-#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
-#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
-#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
-
-/* DVMA chip revisions */
-enum dvma_rev {
-	dvmarev0,
-	dvmaesc1,
-	dvmarev1,
-	dvmarev2,
-	dvmarev3,
-	dvmarevplus,
-	dvmahme
-};
-
-#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
-
-/* Linux DMA information structure, filled during probe. */
-struct sbus_dma {
-	struct sbus_dma *next;
-	struct sbus_dev *sdev;
-	void __iomem *regs;
-
-	/* Status, misc info */
-	int node;                /* Prom node for this DMA device */
-	int running;             /* Are we doing DMA now? */
-	int allocated;           /* Are we "owned" by anyone yet? */
-
-	/* Transfer information. */
-	u32 addr;                /* Start address of current transfer */
-	int nbytes;              /* Size of current transfer */
-	int realbytes;           /* For splitting up large transfers, etc. */
-
-	/* DMA revision */
-	enum dvma_rev revision;
-};
-
-extern struct sbus_dma *dma_chain;
-
-/* Broken hardware... */
-#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
-#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
-
-/* Main routines in dma.c */
-extern void dvma_init(struct sbus_bus *);
-
-/* Fields in the cond_reg register */
-/* First, the version identification bits */
-#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
-#define DMA_VERS0        0x00000000        /* Sunray DMA version */
-#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
-#define DMA_VERS1        0x80000000        /* DMA rev 1 */
-#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
-#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
-#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
-
-#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
-#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
-#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
-#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
-#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
-#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
-#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
-#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
-#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
-#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
-#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
-#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
-#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
-#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
-#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
-#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
-#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
-#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
-#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
-#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
-#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
-#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
-#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
-#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
-#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
-#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
-#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
-#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
-#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
-#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
-#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
-#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
-#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
-#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
-#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
-#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
-#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
-#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
-#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
-#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
-#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
-
-/* Values describing the burst-size property from the PROM */
-#define DMA_BURST1       0x01
-#define DMA_BURST2       0x02
-#define DMA_BURST4       0x04
-#define DMA_BURST8       0x08
-#define DMA_BURST16      0x10
-#define DMA_BURST32      0x20
-#define DMA_BURST64      0x40
-#define DMA_BURSTBITS    0x7f
-
-/* Determine highest possible final transfer address given a base */
-#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
-
-/* Yes, I hack a lot of elisp in my spare time... */
-#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
-#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
-#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
-#define DMA_OFF(__regs)		\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp &= ~DMA_ENABLE; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSOFF(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp &= ~DMA_INT_ENAB; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_INTSON(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= DMA_INT_ENAB; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_PUNTFIFO(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= DMA_FIFO_INV; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_SETSTART(__regs, __addr)	\
-	sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
-#define DMA_BEGINDMA_W(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-#define DMA_BEGINDMA_R(__regs)	\
-do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
-	tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
-	tmp &= ~DMA_ST_WRITE; \
-	sbus_writel(tmp, (__regs) + DMA_CSR); \
-} while(0)
-
-/* For certain DMA chips, we need to disable ints upon irq entry
- * and turn them back on when we are done.  So in any ESP interrupt
- * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
- * when leaving the handler.  You have been warned...
- */
-#define DMA_IRQ_ENTRY(dma, dregs) do { \
-        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
-   } while (0)
-
-#define DMA_IRQ_EXIT(dma, dregs) do { \
-	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
-   } while(0)
-
-#define for_each_dvma(dma) \
-        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/include/asm-sparc64/ebus.h b/include/asm-sparc64/ebus.h
deleted file mode 100644
index fcc62b97ced5..000000000000
--- a/include/asm-sparc64/ebus.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * ebus.h: PCI to Ebus pseudo driver software state.
- *
- * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
- */
-
-#ifndef __SPARC64_EBUS_H
-#define __SPARC64_EBUS_H
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-
-struct linux_ebus_child {
-	struct linux_ebus_child		*next;
-	struct linux_ebus_device	*parent;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-
-struct linux_ebus_device {
-	struct of_device		ofdev;
-	struct linux_ebus_device	*next;
-	struct linux_ebus_child		*children;
-	struct linux_ebus		*bus;
-	struct device_node		*prom_node;
-	struct resource			 resource[PROMREG_MAX];
-	int				 num_addrs;
-	unsigned int			 irqs[PROMINTR_MAX];
-	int				 num_irqs;
-};
-#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
-
-struct linux_ebus {
-	struct of_device		ofdev;
-	struct linux_ebus		*next;
-	struct linux_ebus_device	*devices;
-	struct pci_dev			*self;
-	int				 index;
-	int				 is_rio;
-	struct device_node		*prom_node;
-};
-#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
-
-struct ebus_dma_info {
-	spinlock_t	lock;
-	void __iomem	*regs;
-
-	unsigned int	flags;
-#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER		0x00000001
-#define EBUS_DMA_FLAG_TCI_DISABLE		0x00000002
-
-	/* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
-	 * set.
-	 */
-	void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
-	void *client_cookie;
-	unsigned int	irq;
-#define EBUS_DMA_EVENT_ERROR	1
-#define EBUS_DMA_EVENT_DMA	2
-#define EBUS_DMA_EVENT_DEVICE	4
-
-	unsigned char	name[64];
-};
-
-extern int ebus_dma_register(struct ebus_dma_info *p);
-extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
-extern void ebus_dma_unregister(struct ebus_dma_info *p);
-extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
-			    size_t len);
-extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
-extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
-extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
-extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
-
-extern struct linux_ebus		*ebus_chain;
-
-extern void ebus_init(void);
-
-#define for_each_ebus(bus)						\
-        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
-
-#define for_each_ebusdev(dev, bus)					\
-        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
-
-#define for_each_edevchild(dev, child)					\
-        for((child) = (dev)->children; (child); (child) = (child)->next)
-
-#endif /* !(__SPARC64_EBUS_H) */
diff --git a/include/asm-sparc64/elf.h b/include/asm-sparc64/elf.h
deleted file mode 100644
index 0818a1308f4e..000000000000
--- a/include/asm-sparc64/elf.h
+++ /dev/null
@@ -1,217 +0,0 @@
-#ifndef __ASM_SPARC64_ELF_H
-#define __ASM_SPARC64_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/spitfire.h>
-
-/*
- * Sparc section types
- */
-#define STT_REGISTER		13
-
-/*
- * Sparc ELF relocation types
- */
-#define	R_SPARC_NONE		0
-#define	R_SPARC_8		1
-#define	R_SPARC_16		2
-#define	R_SPARC_32		3
-#define	R_SPARC_DISP8		4
-#define	R_SPARC_DISP16		5
-#define	R_SPARC_DISP32		6
-#define	R_SPARC_WDISP30		7
-#define	R_SPARC_WDISP22		8
-#define	R_SPARC_HI22		9
-#define	R_SPARC_22		10
-#define	R_SPARC_13		11
-#define	R_SPARC_LO10		12
-#define	R_SPARC_GOT10		13
-#define	R_SPARC_GOT13		14
-#define	R_SPARC_GOT22		15
-#define	R_SPARC_PC10		16
-#define	R_SPARC_PC22		17
-#define	R_SPARC_WPLT30		18
-#define	R_SPARC_COPY		19
-#define	R_SPARC_GLOB_DAT	20
-#define	R_SPARC_JMP_SLOT	21
-#define	R_SPARC_RELATIVE	22
-#define	R_SPARC_UA32		23
-#define R_SPARC_PLT32		24
-#define R_SPARC_HIPLT22		25
-#define R_SPARC_LOPLT10		26
-#define R_SPARC_PCPLT32		27
-#define R_SPARC_PCPLT22		28
-#define R_SPARC_PCPLT10		29
-#define R_SPARC_10		30
-#define R_SPARC_11		31
-#define R_SPARC_64		32
-#define R_SPARC_OLO10		33
-#define R_SPARC_WDISP16		40
-#define R_SPARC_WDISP19		41
-#define R_SPARC_7		43
-#define R_SPARC_5		44
-#define R_SPARC_6		45
-
-/* Bits present in AT_HWCAP, primarily for Sparc32.  */
-
-#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
-#define HWCAP_SPARC_STBAR       2
-#define HWCAP_SPARC_SWAP        4
-#define HWCAP_SPARC_MULDIV      8
-#define HWCAP_SPARC_V9		16
-#define HWCAP_SPARC_ULTRA3	32
-#define HWCAP_SPARC_BLKINIT	64
-#define HWCAP_SPARC_N2		128
-
-#define CORE_DUMP_USE_REGSET
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_ARCH		EM_SPARCV9
-#define ELF_CLASS		ELFCLASS64
-#define ELF_DATA		ELFDATA2MSB
-
-/* Format of 64-bit elf_gregset_t is:
- * 	G0 --> G7
- * 	O0 --> O7
- * 	L0 --> L7
- * 	I0 --> I7
- *	TSTATE
- *	TPC
- *	TNPC
- *	Y
- */
-typedef unsigned long elf_greg_t;
-#define ELF_NGREG 36
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct {
-	unsigned long	pr_regs[32];
-	unsigned long	pr_fsr;
-	unsigned long	pr_gsr;
-	unsigned long	pr_fprs;
-} elf_fpregset_t;
-
-/* Format of 32-bit elf_gregset_t is:
- * 	G0 --> G7
- *	O0 --> O7
- *	L0 --> L7
- *	I0 --> I7
- *	PSR, PC, nPC, Y, WIM, TBR
- */
-typedef unsigned int compat_elf_greg_t;
-#define COMPAT_ELF_NGREG 38
-typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
-
-typedef struct {
-	union {
-		unsigned int	pr_regs[32];
-		unsigned long	pr_dregs[16];
-	} pr_fr;
-	unsigned int __unused;
-	unsigned int	pr_fsr;
-	unsigned char	pr_qcnt;
-	unsigned char	pr_q_entrysize;
-	unsigned char	pr_en;
-	unsigned int	pr_q[64];
-} compat_elf_fpregset_t;
-
-/* UltraSparc extensions.  Still unused, but will be eventually.  */
-typedef struct {
-	unsigned int pr_type;
-	unsigned int pr_align;
-	union {
-		struct {
-			union {
-				unsigned int	pr_regs[32];
-				unsigned long	pr_dregs[16];
-				long double	pr_qregs[8];
-			} pr_xfr;
-		} pr_v8p;
-		unsigned int	pr_xfsr;
-		unsigned int	pr_fprs;
-		unsigned int	pr_xg[8];
-		unsigned int	pr_xo[8];
-		unsigned long	pr_tstate;
-		unsigned int	pr_filler[8];
-	} pr_un;
-} elf_xregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x)		((x)->e_machine == ELF_ARCH)
-#define compat_elf_check_arch(x)	((x)->e_machine == EM_SPARC || \
-					 (x)->e_machine == EM_SPARC32PLUS)
-#define compat_start_thread		start_thread32
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE		0x0000010000000000UL
-#define COMPAT_ELF_ET_DYN_BASE	0x0000000070000000UL
-
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-/* On Ultra, we support all of the v8 capabilities. */
-static inline unsigned int sparc64_elf_hwcap(void)
-{
-	unsigned int cap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR |
-			    HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV |
-			    HWCAP_SPARC_V9);
-
-	if (tlb_type == cheetah || tlb_type == cheetah_plus)
-		cap |= HWCAP_SPARC_ULTRA3;
-	else if (tlb_type == hypervisor) {
-		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
-		    sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
-			cap |= HWCAP_SPARC_BLKINIT;
-		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
-			cap |= HWCAP_SPARC_N2;
-	}
-
-	return cap;
-}
-
-#define ELF_HWCAP	sparc64_elf_hwcap();
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM	(NULL)
-
-#define SET_PERSONALITY(ex, ibcs2)			\
-do {	unsigned long new_flags = current_thread_info()->flags; \
-	new_flags &= _TIF_32BIT;			\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
-		new_flags |= _TIF_32BIT;		\
-	else						\
-		new_flags &= ~_TIF_32BIT;		\
-	if ((current_thread_info()->flags & _TIF_32BIT) \
-	    != new_flags)				\
-		set_thread_flag(TIF_ABI_PENDING);	\
-	else						\
-		clear_thread_flag(TIF_ABI_PENDING);	\
-	/* flush_thread will update pgd cache */	\
-	if (ibcs2)					\
-		set_personality(PER_SVR4);		\
-	else if (current->personality != PER_LINUX32)	\
-		set_personality(PER_LINUX);		\
-} while (0)
-
-#endif /* !(__ASM_SPARC64_ELF_H) */
diff --git a/include/asm-sparc64/emergency-restart.h b/include/asm-sparc64/emergency-restart.h
deleted file mode 100644
index 2cac7b644da8..000000000000
--- a/include/asm-sparc64/emergency-restart.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/emergency-restart.h>
diff --git a/include/asm-sparc64/envctrl.h b/include/asm-sparc64/envctrl.h
deleted file mode 100644
index a5668a082b14..000000000000
--- a/include/asm-sparc64/envctrl.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- *
- * envctrl.h: Definitions for access to the i2c environment
- *            monitoring on Ultrasparc systems.
- *
- * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
- * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
- * VT - Add all ioctl commands and environment status definitions 
- * VT - Add application note 
- */
-#ifndef _SPARC64_ENVCTRL_H
-#define _SPARC64_ENVCTRL_H 1
-
-#include <linux/ioctl.h>
-
-/* Application note:
- *
- * The driver supports 4 operations: open(), close(), ioctl(), read()
- * The device name is /dev/envctrl.
- * Below is sample usage:
- *
- *	fd = open("/dev/envtrl", O_RDONLY);
- *	if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
- *		printf("error\n");
- *	ret = read(fd, buf, 10);
- *	close(fd);
- *
- * Notice in the case of cpu voltage and temperature, the default is
- * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
- * pass in cpu number in ioctl() last parameter.  For example, to
- * get the voltage of cpu2:
- *
- *	ioctlbuf[0] = 2;
- *	if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
- *		printf("error\n");
- *	ret = read(fd, buf, 10);
- *
- * All the return values are in ascii.  So check read return value
- * and do appropriate conversions in your application.
- */
-
-/* IOCTL commands */
-
-/* Note: these commands reflect possible monitor features.
- * Some boards choose to support some of the features only.
- */
-#define ENVCTRL_RD_CPU_TEMPERATURE	_IOR('p', 0x40, int)
-#define ENVCTRL_RD_CPU_VOLTAGE		_IOR('p', 0x41, int)
-#define ENVCTRL_RD_FAN_STATUS		_IOR('p', 0x42, int)
-#define ENVCTRL_RD_WARNING_TEMPERATURE	_IOR('p', 0x43, int)
-#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE	_IOR('p', 0x44, int)
-#define ENVCTRL_RD_VOLTAGE_STATUS	_IOR('p', 0x45, int)
-#define ENVCTRL_RD_SCSI_TEMPERATURE	_IOR('p', 0x46, int)
-#define ENVCTRL_RD_ETHERNET_TEMPERATURE	_IOR('p', 0x47, int)
-#define ENVCTRL_RD_MTHRBD_TEMPERATURE	_IOR('p', 0x48, int)
-
-#define ENVCTRL_RD_GLOBALADDRESS	_IOR('p', 0x49, int)
-
-/* Read return values for a voltage status request. */
-#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD	0x01
-#define ENVCTRL_VOLTAGE_BAD			0x02
-#define ENVCTRL_POWERSUPPLY_BAD			0x03
-#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD		0x04
-
-/* Read return values for a fan status request.
- * A failure match means either the fan fails or
- * the fan is not connected.  Some boards have optional
- * connectors to connect extra fans.
- *
- * There are maximum 8 monitor fans.  Some are cpu fans
- * some are system fans.  The mask below only indicates
- * fan by order number.
- * Below is a sample application:
- *
- *	if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
- *		printf("ioctl fan failed\n");
- *	}
- *	if (read(fd, rslt, 1) <= 0) {
- *		printf("error or fan not monitored\n");
- *	} else {
- *		if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
- *			printf("all fans good\n");
- *	} else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
- *		printf("all fans bad\n");
- *	} else {
- *		if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
- *			printf("fan 0 failed or not connected\n");
- *	}
- *	......
- */  
-
-#define ENVCTRL_ALL_FANS_GOOD			0x00
-#define ENVCTRL_FAN0_FAILURE_MASK		0x01
-#define ENVCTRL_FAN1_FAILURE_MASK		0x02
-#define ENVCTRL_FAN2_FAILURE_MASK		0x04
-#define ENVCTRL_FAN3_FAILURE_MASK		0x08
-#define ENVCTRL_FAN4_FAILURE_MASK		0x10
-#define ENVCTRL_FAN5_FAILURE_MASK		0x20
-#define ENVCTRL_FAN6_FAILURE_MASK		0x40
-#define ENVCTRL_FAN7_FAILURE_MASK		0x80
-#define ENVCTRL_ALL_FANS_BAD 			0xFF
-
-#endif /* !(_SPARC64_ENVCTRL_H) */
diff --git a/include/asm-sparc64/errno.h b/include/asm-sparc64/errno.h
deleted file mode 100644
index 9701fe01cc53..000000000000
--- a/include/asm-sparc64/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/errno.h>
diff --git a/include/asm-sparc64/estate.h b/include/asm-sparc64/estate.h
deleted file mode 100644
index 520c08560d1b..000000000000
--- a/include/asm-sparc64/estate.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _SPARC64_ESTATE_H
-#define _SPARC64_ESTATE_H
-
-/* UltraSPARC-III E-cache Error Enable */
-#define ESTATE_ERROR_FMT	0x0000000000040000 /* Force MTAG ECC		*/
-#define ESTATE_ERROR_FMESS	0x000000000003c000 /* Forced MTAG ECC val	*/
-#define ESTATE_ERROR_FMD	0x0000000000002000 /* Force DATA ECC		*/
-#define ESTATE_ERROR_FDECC	0x0000000000001ff0 /* Forced DATA ECC val	*/
-#define ESTATE_ERROR_UCEEN	0x0000000000000008 /* See below			*/
-#define ESTATE_ERROR_NCEEN	0x0000000000000002 /* See below			*/
-#define ESTATE_ERROR_CEEN	0x0000000000000001 /* See below			*/
-
-/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
- * errors 2) uncorrectable E-cache errors.  Such events only occur on reads
- * of the E-cache by the local processor for: 1) data loads 2) instruction
- * fetches 3) atomic operations.  Such events _cannot_ occur for: 1) merge
- * 2) writeback 2) copyout.  The AFSR bits associated with these traps are
- * UCC and UCU.
- */
-
-/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
- * for uncorrectable ECC errors and system errors.
- *
- * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
- * or system bus BusERR:
- * 1) As the result of an instruction fetch, will generate instruction_access_error
- * 2) As the result of a load etc. will generate data_access_error.
- * 3) As the result of store merge completion, writeback, or copyout will
- *    generate a disrupting ECC_error trap.
- * 4) As the result of such errors on instruction vector fetch can generate any
- *    of the 3 trap types.
- *
- * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
- * BERR, and TO.
- */
-
-/* CEEN enables the ECC_error trap for hardware corrected ECC errors.  System bus
- * reads resulting in a hardware corrected data or MTAG ECC error will generate an
- * ECC_error disrupting trap with this bit enabled.
- *
- * This same trap will also be generated when a hardware corrected ECC error results
- * during store merge, writeback, and copyout operations.
- */
-
-/* In general, if the trap enable bits above are disabled the AFSR bits will still
- * log the events even though the trap will not be generated by the processor.
- */
-
-#endif /* _SPARC64_ESTATE_H */
diff --git a/include/asm-sparc64/fb.h b/include/asm-sparc64/fb.h
deleted file mode 100644
index 1c2ac5832f39..000000000000
--- a/include/asm-sparc64/fb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/fb.h>
diff --git a/include/asm-sparc64/fbio.h b/include/asm-sparc64/fbio.h
deleted file mode 100644
index b9215a0907d3..000000000000
--- a/include/asm-sparc64/fbio.h
+++ /dev/null
@@ -1,330 +0,0 @@
-#ifndef __LINUX_FBIO_H
-#define __LINUX_FBIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Constants used for fbio SunOS compatibility */
-/* (C) 1996 Miguel de Icaza */
-
-/* Frame buffer types */
-#define FBTYPE_NOTYPE           -1
-#define FBTYPE_SUN1BW           0   /* mono */
-#define FBTYPE_SUN1COLOR        1 
-#define FBTYPE_SUN2BW           2 
-#define FBTYPE_SUN2COLOR        3 
-#define FBTYPE_SUN2GP           4 
-#define FBTYPE_SUN5COLOR        5 
-#define FBTYPE_SUN3COLOR        6 
-#define FBTYPE_MEMCOLOR         7 
-#define FBTYPE_SUN4COLOR        8 
- 
-#define FBTYPE_NOTSUN1          9 
-#define FBTYPE_NOTSUN2          10
-#define FBTYPE_NOTSUN3          11
- 
-#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
-#define FBTYPE_SUNROP_COLOR     13
-#define FBTYPE_SUNFB_VIDEO      14
-#define FBTYPE_SUNGIFB          15
-#define FBTYPE_SUNGPLAS         16
-#define FBTYPE_SUNGP3           17
-#define FBTYPE_SUNGT            18
-#define FBTYPE_SUNLEO           19      /* zx Leo card */
-#define FBTYPE_MDICOLOR         20      /* cg14 */
-#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
-
-#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
-
-/* Does not seem to be listed in the Sun file either */
-#define FBTYPE_CREATOR          22
-#define FBTYPE_PCI_IGA1682	23
-#define FBTYPE_P9100COLOR	24
-
-#define FBTYPE_PCI_GENERIC	1000
-#define FBTYPE_PCI_MACH64	1001
-
-/* fbio ioctls */
-/* Returned by FBIOGTYPE */
-struct  fbtype {
-        int     fb_type;        /* fb type, see above */
-        int     fb_height;      /* pixels */
-        int     fb_width;       /* pixels */
-        int     fb_depth;
-        int     fb_cmsize;      /* color map entries */
-        int     fb_size;        /* fb size in bytes */
-};
-#define FBIOGTYPE _IOR('F', 0, struct fbtype)
-
-struct  fbcmap {
-        int             index;          /* first element (0 origin) */
-        int             count;
-        unsigned char   __user *red;
-        unsigned char   __user *green;
-        unsigned char   __user *blue;
-};
-
-#ifdef __KERNEL__
-#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
-#else
-#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
-#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
-#endif
-
-/* # of device specific values */
-#define FB_ATTR_NDEVSPECIFIC    8
-/* # of possible emulations */
-#define FB_ATTR_NEMUTYPES       4
- 
-struct fbsattr {
-        int     flags;
-        int     emu_type;	/* -1 if none */
-        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
-};
- 
-struct fbgattr {
-        int     real_type;	/* real frame buffer type */
-        int     owner;		/* unknown */
-        struct fbtype fbtype;	/* real frame buffer fbtype */
-        struct fbsattr sattr;   
-        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
-};
-#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
-#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
-
-#define FBIOSVIDEO _IOW('F', 7, int)
-#define FBIOGVIDEO _IOR('F', 8, int)
-
-struct fbcursor {
-        short set;              /* what to set, choose from the list above */
-        short enable;           /* cursor on/off */
-        struct fbcurpos pos;    /* cursor position */
-        struct fbcurpos hot;    /* cursor hot spot */
-        struct fbcmap cmap;     /* color map info */
-        struct fbcurpos size;   /* cursor bit map size */
-        char __user *image;     /* cursor image bits */
-        char __user *mask;      /* cursor mask bits */
-};
-
-/* set/get cursor attributes/shape */
-#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
-#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
- 
-/* set/get cursor position */
-#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
-#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
- 
-/* get max cursor size */
-#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
-
-/* wid manipulation */
-struct fb_wid_alloc {
-#define FB_WID_SHARED_8		0
-#define FB_WID_SHARED_24	1
-#define FB_WID_DBL_8		2
-#define FB_WID_DBL_24		3
-	__u32	wa_type;
-	__s32	wa_index;	/* Set on return */
-	__u32	wa_count;	
-};
-struct fb_wid_item {
-	__u32	wi_type;
-	__s32	wi_index;
-	__u32	wi_attrs;
-	__u32	wi_values[32];
-};
-struct fb_wid_list {
-	__u32	wl_flags;
-	__u32	wl_count;
-	struct fb_wid_item	*wl_list;
-};
-
-#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
-#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
-#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
-#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
-
-/* Creator ioctls */
-#define FFB_IOCTL	('F'<<8)
-#define FFB_SYS_INFO		(FFB_IOCTL|80)
-#define FFB_CLUTREAD		(FFB_IOCTL|81)
-#define FFB_CLUTPOST		(FFB_IOCTL|82)
-#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
-#define FFB_GETMONITORID	(FFB_IOCTL|84)
-#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
-#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
-#define FFB_SETSERVER		(FFB_IOCTL|87)
-#define FFB_SETOVCTL		(FFB_IOCTL|88)
-#define FFB_GETOVCTL		(FFB_IOCTL|89)
-#define FFB_GETSAXNUM		(FFB_IOCTL|90)
-#define FFB_FBDEBUG		(FFB_IOCTL|91)
-
-/* Cg14 ioctls */
-#define MDI_IOCTL          ('M'<<8)
-#define MDI_RESET          (MDI_IOCTL|1)
-#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
-#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
-#    define MDI_32_PIX     32
-#    define MDI_16_PIX     16
-#    define MDI_8_PIX      8
-
-struct mdi_cfginfo {
-	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
-        int     mdi_type;       /* FBTYPE name */
-        int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
-        int     mdi_size;       /* available ram */
-        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
-        int     mdi_pixfreq;    /* pixel clock (from PROM) */
-};
-
-/* SparcLinux specific ioctl for the MDI, should be replaced for
- * the SET_XLUT/SET_CLUTn ioctls instead
- */
-#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
-
-/* leo & ffb ioctls */
-struct fb_clut_alloc {
-	__u32	clutid;	/* Set on return */
- 	__u32	flag;
- 	__u32	index;
-};
-
-struct fb_clut {
-#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
- 	__u32	flag;
- 	__u32	clutid;
- 	__u32	offset;
- 	__u32	count;
- 	char *	red;
- 	char *	green;
- 	char *	blue;
-};
-
-struct fb_clut32 {
- 	__u32	flag;
- 	__u32	clutid;
- 	__u32	offset;
- 	__u32	count;
- 	__u32	red;
- 	__u32	green;
- 	__u32	blue;
-};
-
-#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
-#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
-#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
-#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
-#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
-#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
-
-#ifdef __KERNEL__
-/* Addresses on the fd of a cgsix that are mappable */
-#define CG6_FBC    0x70000000
-#define CG6_TEC    0x70001000
-#define CG6_BTREGS 0x70002000
-#define CG6_FHC    0x70004000
-#define CG6_THC    0x70005000
-#define CG6_ROM    0x70006000
-#define CG6_RAM    0x70016000
-#define CG6_DHC    0x80000000
-
-#define CG3_MMAP_OFFSET 0x4000000
-
-/* Addresses on the fd of a tcx that are mappable */
-#define TCX_RAM8BIT   		0x00000000
-#define TCX_RAM24BIT   		0x01000000
-#define TCX_UNK3   		0x10000000
-#define TCX_UNK4   		0x20000000
-#define TCX_CONTROLPLANE   	0x28000000
-#define TCX_UNK6   		0x30000000
-#define TCX_UNK7   		0x38000000
-#define TCX_TEC    		0x70000000
-#define TCX_BTREGS 		0x70002000
-#define TCX_THC    		0x70004000
-#define TCX_DHC    		0x70008000
-#define TCX_ALT	   		0x7000a000
-#define TCX_SYNC   		0x7000e000
-#define TCX_UNK2    		0x70010000
-
-/* CG14 definitions */
-
-/* Offsets into the OBIO space: */
-#define CG14_REGS        0       /* registers */
-#define CG14_CURSORREGS  0x1000  /* cursor registers */
-#define CG14_DACREGS     0x2000  /* DAC registers */
-#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
-#define CG14_CLUT1       0x4000  /* Color Look Up Table */
-#define CG14_CLUT2       0x5000  /* Color Look Up Table */
-#define CG14_CLUT3       0x6000  /* Color Look Up Table */
-#define CG14_AUTO	 0xf000
-
-#endif /* KERNEL */
-
-/* These are exported to userland for applications to use */
-/* Mappable offsets for the cg14: control registers */
-#define MDI_DIRECT_MAP 0x10000000
-#define MDI_CTLREG_MAP 0x20000000
-#define MDI_CURSOR_MAP 0x30000000
-#define MDI_SHDW_VRT_MAP 0x40000000
-
-/* Mappable offsets for the cg14: frame buffer resolutions */
-/* 32 bits */
-#define MDI_CHUNKY_XBGR_MAP 0x50000000
-#define MDI_CHUNKY_BGR_MAP 0x60000000
-
-/* 16 bits */
-#define MDI_PLANAR_X16_MAP 0x70000000
-#define MDI_PLANAR_C16_MAP 0x80000000
-
-/* 8 bit is done as CG3 MMAP offset */
-/* 32 bits, planar */
-#define MDI_PLANAR_X32_MAP 0x90000000
-#define MDI_PLANAR_B32_MAP 0xa0000000
-#define MDI_PLANAR_G32_MAP 0xb0000000
-#define MDI_PLANAR_R32_MAP 0xc0000000
-
-/* Mappable offsets on leo */
-#define LEO_SS0_MAP            0x00000000
-#define LEO_LC_SS0_USR_MAP     0x00800000
-#define LEO_LD_SS0_MAP         0x00801000
-#define LEO_LX_CURSOR_MAP      0x00802000
-#define LEO_SS1_MAP            0x00803000
-#define LEO_LC_SS1_USR_MAP     0x01003000
-#define LEO_LD_SS1_MAP         0x01004000
-#define LEO_UNK_MAP            0x01005000
-#define LEO_LX_KRN_MAP         0x01006000
-#define LEO_LC_SS0_KRN_MAP     0x01007000
-#define LEO_LC_SS1_KRN_MAP     0x01008000
-#define LEO_LD_GBL_MAP         0x01009000
-#define LEO_UNK2_MAP           0x0100a000
-
-#ifdef __KERNEL__
-struct  fbcmap32 {
-	int             index;          /* first element (0 origin) */
-	int             count;
-	u32		red;
-	u32		green;
-	u32		blue;
-};
-
-#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
-#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
-
-struct fbcursor32 {
-	short set;		/* what to set, choose from the list above */
-	short enable;		/* cursor on/off */
-	struct fbcurpos pos;	/* cursor position */
-	struct fbcurpos hot;	/* cursor hot spot */
-	struct fbcmap32 cmap;	/* color map info */
-	struct fbcurpos size;	/* cursor bit map size */
-	u32	image;		/* cursor image bits */
-	u32	mask;		/* cursor mask bits */
-};
-
-#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
-#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
-#endif
-
-#endif /* __LINUX_FBIO_H */
diff --git a/include/asm-sparc64/fcntl.h b/include/asm-sparc64/fcntl.h
deleted file mode 100644
index 8a09ca7aa2f2..000000000000
--- a/include/asm-sparc64/fcntl.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _SPARC64_FCNTL_H
-#define _SPARC64_FCNTL_H
-
-/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
-   located on an ext2 file system */
-#define O_NDELAY	0x0004
-#define O_APPEND	0x0008
-#define FASYNC		0x0040	/* fcntl, for BSD compatibility */
-#define O_CREAT		0x0200	/* not fcntl */
-#define O_TRUNC		0x0400	/* not fcntl */
-#define O_EXCL		0x0800	/* not fcntl */
-#define O_SYNC		0x2000
-#define O_NONBLOCK	0x4000
-#define O_NOCTTY	0x8000	/* not fcntl */
-#define O_LARGEFILE	0x40000
-#define O_DIRECT        0x100000 /* direct disk access hint */
-#define O_NOATIME	0x200000
-#define O_CLOEXEC	0x400000
-
-#define F_GETOWN	5	/*  for sockets. */
-#define F_SETOWN	6	/*  for sockets. */
-#define F_GETLK		7
-#define F_SETLK		8
-#define F_SETLKW	9
-
-/* for posix fcntl() and lockf() */
-#define F_RDLCK		1
-#define F_WRLCK		2
-#define F_UNLCK		3
-
-#define __ARCH_FLOCK_PAD	short __unused;
-
-#include <asm-generic/fcntl.h>
-
-#endif /* !(_SPARC64_FCNTL_H) */
diff --git a/include/asm-sparc64/fhc.h b/include/asm-sparc64/fhc.h
deleted file mode 100644
index ddffcdfbc984..000000000000
--- a/include/asm-sparc64/fhc.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
- *
- * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
- */
-
-#ifndef _SPARC64_FHC_H
-#define _SPARC64_FHC_H
-
-#include <linux/timer.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/upa.h>
-
-struct linux_fhc;
-
-/* Clock board register offsets. */
-#define CLOCK_CTRL	0x00UL	/* Main control */
-#define CLOCK_STAT1	0x10UL	/* Status one */
-#define CLOCK_STAT2	0x20UL	/* Status two */
-#define CLOCK_PWRSTAT	0x30UL	/* Power status */
-#define CLOCK_PWRPRES	0x40UL	/* Power presence */
-#define CLOCK_TEMP	0x50UL	/* Temperature */
-#define CLOCK_IRQDIAG	0x60UL	/* IRQ diagnostics */
-#define CLOCK_PWRSTAT2	0x70UL	/* Power status two */
-
-#define CLOCK_CTRL_LLED		0x04	/* Left LED, 0 == on */
-#define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
-#define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
-
-struct linux_central {
-	struct linux_fhc		*child;
-	unsigned long			cfreg;
-	unsigned long			clkregs;
-	unsigned long			clkver;
-	int				slots;
-	struct device_node		*prom_node;
-
-	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
-	int				num_central_ranges;
-};
-
-/* Firehose controller register offsets */
-struct fhc_regs {
-	unsigned long			pregs;	/* FHC internal regs */
-#define FHC_PREGS_ID	0x00UL	/* FHC ID */
-#define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
-#define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
-#define  FHC_ID_MANUF		0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
-#define  FHC_ID_RESV		0x00000001 /* Read as one			*/
-#define FHC_PREGS_RCS	0x10UL	/* FHC Reset Control/Status Register */
-#define  FHC_RCS_POR		0x80000000 /* Last reset was a power cycle	*/
-#define  FHC_RCS_SPOR		0x40000000 /* Last reset was sw power on reset	*/
-#define  FHC_RCS_SXIR		0x20000000 /* Last reset was sw XIR reset	*/
-#define  FHC_RCS_BPOR		0x10000000 /* Last reset was due to POR button	*/
-#define  FHC_RCS_BXIR		0x08000000 /* Last reset was due to XIR button	*/
-#define  FHC_RCS_WEVENT		0x04000000 /* CPU reset was due to wakeup event	*/
-#define  FHC_RCS_CFATAL		0x02000000 /* Centerplane Fatal Error signalled	*/
-#define  FHC_RCS_FENAB		0x01000000 /* Fatal errors elicit system reset	*/
-#define FHC_PREGS_CTRL	0x20UL	/* FHC Control Register */
-#define  FHC_CONTROL_ICS	0x00100000 /* Ignore Centerplane Signals	*/
-#define  FHC_CONTROL_FRST	0x00080000 /* Fatal Error Reset Enable		*/
-#define  FHC_CONTROL_LFAT	0x00040000 /* AC/DC signalled a local error	*/
-#define  FHC_CONTROL_SLINE	0x00010000 /* Firmware Synchronization Line	*/
-#define  FHC_CONTROL_DCD	0x00008000 /* DC-->DC Converter Disable		*/
-#define  FHC_CONTROL_POFF	0x00004000 /* AC/DC Controller PLL Disable	*/
-#define  FHC_CONTROL_FOFF	0x00002000 /* FHC Controller PLL Disable	*/
-#define  FHC_CONTROL_AOFF	0x00001000 /* CPU A SRAM/SBD Low Power Mode	*/
-#define  FHC_CONTROL_BOFF	0x00000800 /* CPU B SRAM/SBD Low Power Mode	*/
-#define  FHC_CONTROL_PSOFF	0x00000400 /* Turns off this FHC's power supply	*/
-#define  FHC_CONTROL_IXIST	0x00000200 /* 0=FHC tells clock board it exists	*/
-#define  FHC_CONTROL_XMSTR	0x00000100 /* 1=Causes this FHC to be XIR master*/
-#define  FHC_CONTROL_LLED	0x00000040 /* 0=Left LED ON			*/
-#define  FHC_CONTROL_MLED	0x00000020 /* 1=Middle LED ON			*/
-#define  FHC_CONTROL_RLED	0x00000010 /* 1=Right LED			*/
-#define  FHC_CONTROL_BPINS	0x00000003 /* Spare Bidirectional Pins		*/
-#define FHC_PREGS_BSR	0x30UL	/* FHC Board Status Register */
-#define  FHC_BSR_DA64		0x00040000 /* Port A: 0=128bit 1=64bit data path */
-#define  FHC_BSR_DB64		0x00020000 /* Port B: 0=128bit 1=64bit data path */
-#define  FHC_BSR_BID		0x0001e000 /* Board ID                           */
-#define  FHC_BSR_SA		0x00001c00 /* Port A UPA Speed (from the pins)   */
-#define  FHC_BSR_SB		0x00000380 /* Port B UPA Speed (from the pins)   */
-#define  FHC_BSR_NDIAG		0x00000040 /* Not in Diag Mode                   */
-#define  FHC_BSR_NTBED		0x00000020 /* Not in TestBED Mode                */
-#define  FHC_BSR_NIA		0x0000001c /* Jumper, bit 18 in PROM space       */
-#define  FHC_BSR_SI		0x00000001 /* Spare input pin value              */
-#define FHC_PREGS_ECC	0x40UL	/* FHC ECC Control Register (16 bits) */
-#define FHC_PREGS_JCTRL	0xf0UL	/* FHC JTAG Control Register */
-#define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
-#define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
-#define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
-	unsigned long			ireg;	/* FHC IGN reg */
-#define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
-	unsigned long			ffregs;	/* FHC fanfail regs */
-#define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
-#define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
-	unsigned long			sregs;	/* FHC system regs */
-#define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
-#define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
-	unsigned long			uregs;	/* FHC uart regs */
-#define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
-#define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
-	unsigned long			tregs;	/* FHC TOD regs */
-#define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
-#define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
-};
-
-struct linux_fhc {
-	struct linux_fhc		*next;
-	struct linux_central		*parent;	/* NULL if not central FHC */
-	struct fhc_regs			fhc_regs;
-	int				board;
-	int				jtag_master;
-	struct device_node		*prom_node;
-
-	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
-	int				num_fhc_ranges;
-};
-
-extern struct linux_central *central_bus;
-
-extern void apply_central_ranges(struct linux_central *central, 
-				 struct linux_prom_registers *regs,
-				 int nregs);
-
-extern void apply_fhc_ranges(struct linux_fhc *fhc, 
-			     struct linux_prom_registers *regs,
-			     int nregs);
-
-#endif /* !(_SPARC64_FHC_H) */
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
deleted file mode 100644
index ca19f80a9b7d..000000000000
--- a/include/asm-sparc64/floppy.h
+++ /dev/null
@@ -1,782 +0,0 @@
-/* floppy.h: Sparc specific parts of the Floppy driver.
- *
- * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- *
- * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
- */
-
-#ifndef __ASM_SPARC64_FLOPPY_H
-#define __ASM_SPARC64_FLOPPY_H
-
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/idprom.h>
-#include <asm/oplib.h>
-#include <asm/auxio.h>
-#include <asm/sbus.h>
-#include <asm/irq.h>
-
-
-/*
- * Define this to enable exchanging drive 0 and 1 if only drive 1 is
- * probed on PCI machines.
- */
-#undef PCI_FDC_SWAP_DRIVES
-
-
-/* References:
- * 1) Netbsd Sun floppy driver.
- * 2) NCR 82077 controller manual
- * 3) Intel 82077 controller manual
- */
-struct sun_flpy_controller {
-	volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
-	volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
-	volatile unsigned char dor_82077;     /* Digital Output reg. */
-	volatile unsigned char tapectl_82077; /* Tape Control reg */
-	volatile unsigned char status_82077;  /* Main Status Register. */
-#define drs_82077              status_82077   /* Digital Rate Select reg. */
-	volatile unsigned char data_82077;    /* Data fifo. */
-	volatile unsigned char ___unused;
-	volatile unsigned char dir_82077;     /* Digital Input reg. */
-#define dcr_82077              dir_82077      /* Config Control reg. */
-};
-
-/* You'll only ever find one controller on an Ultra anyways. */
-static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
-unsigned long fdc_status;
-static struct sbus_dev *floppy_sdev = NULL;
-
-struct sun_floppy_ops {
-	unsigned char	(*fd_inb) (unsigned long port);
-	void		(*fd_outb) (unsigned char value, unsigned long port);
-	void		(*fd_enable_dma) (void);
-	void		(*fd_disable_dma) (void);
-	void		(*fd_set_dma_mode) (int);
-	void		(*fd_set_dma_addr) (char *);
-	void		(*fd_set_dma_count) (int);
-	unsigned int	(*get_dma_residue) (void);
-	int		(*fd_request_irq) (void);
-	void		(*fd_free_irq) (void);
-	int		(*fd_eject) (int);
-};
-
-static struct sun_floppy_ops sun_fdops;
-
-#define fd_inb(port)              sun_fdops.fd_inb(port)
-#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
-#define fd_enable_dma()           sun_fdops.fd_enable_dma()
-#define fd_disable_dma()          sun_fdops.fd_disable_dma()
-#define fd_request_dma()          (0) /* nothing... */
-#define fd_free_dma()             /* nothing... */
-#define fd_clear_dma_ff()         /* nothing... */
-#define fd_set_dma_mode(mode)     sun_fdops.fd_set_dma_mode(mode)
-#define fd_set_dma_addr(addr)     sun_fdops.fd_set_dma_addr(addr)
-#define fd_set_dma_count(count)   sun_fdops.fd_set_dma_count(count)
-#define get_dma_residue(x)        sun_fdops.get_dma_residue()
-#define fd_cacheflush(addr, size) /* nothing... */
-#define fd_request_irq()          sun_fdops.fd_request_irq()
-#define fd_free_irq()             sun_fdops.fd_free_irq()
-#define fd_eject(drive)           sun_fdops.fd_eject(drive)
-
-/* Super paranoid... */
-#undef HAVE_DISABLE_HLT
-
-static int sun_floppy_types[2] = { 0, 0 };
-
-/* Here is where we catch the floppy driver trying to initialize,
- * therefore this is where we call the PROM device tree probing
- * routine etc. on the Sparc.
- */
-#define FLOPPY0_TYPE		sun_floppy_init()
-#define FLOPPY1_TYPE		sun_floppy_types[1]
-
-#define FDC1			((unsigned long)sun_fdc)
-
-#define N_FDC    1
-#define N_DRIVE  8
-
-/* No 64k boundary crossing problems on the Sparc. */
-#define CROSS_64KB(a,s) (0)
-
-static unsigned char sun_82077_fd_inb(unsigned long port)
-{
-	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to read unknown port %lx\n", port);
-		panic("floppy: Port bolixed.");
-	case 4: /* FD_STATUS */
-		return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
-	case 5: /* FD_DATA */
-		return sbus_readb(&sun_fdc->data_82077);
-	case 7: /* FD_DIR */
-		/* XXX: Is DCL on 0x80 in sun4m? */
-		return sbus_readb(&sun_fdc->dir_82077);
-	};
-	panic("sun_82072_fd_inb: How did I get here?");
-}
-
-static void sun_82077_fd_outb(unsigned char value, unsigned long port)
-{
-	udelay(5);
-	switch(port & 7) {
-	default:
-		printk("floppy: Asked to write to unknown port %lx\n", port);
-		panic("floppy: Port bolixed.");
-	case 2: /* FD_DOR */
-		/* Happily, the 82077 has a real DOR register. */
-		sbus_writeb(value, &sun_fdc->dor_82077);
-		break;
-	case 5: /* FD_DATA */
-		sbus_writeb(value, &sun_fdc->data_82077);
-		break;
-	case 7: /* FD_DCR */
-		sbus_writeb(value, &sun_fdc->dcr_82077);
-		break;
-	case 4: /* FD_STATUS */
-		sbus_writeb(value, &sun_fdc->status_82077);
-		break;
-	};
-	return;
-}
-
-/* For pseudo-dma (Sun floppy drives have no real DMA available to
- * them so we must eat the data fifo bytes directly ourselves) we have
- * three state variables.  doing_pdma tells our inline low-level
- * assembly floppy interrupt entry point whether it should sit and eat
- * bytes from the fifo or just transfer control up to the higher level
- * floppy interrupt c-code.  I tried very hard but I could not get the
- * pseudo-dma to work in c-code without getting many overruns and
- * underruns.  If non-zero, doing_pdma encodes the direction of
- * the transfer for debugging.  1=read 2=write
- */
-unsigned char *pdma_vaddr;
-unsigned long pdma_size;
-volatile int doing_pdma = 0;
-
-/* This is software state */
-char *pdma_base = NULL;
-unsigned long pdma_areasize;
-
-/* Common routines to all controller types on the Sparc. */
-static void sun_fd_disable_dma(void)
-{
-	doing_pdma = 0;
-	if (pdma_base) {
-		mmu_unlockarea(pdma_base, pdma_areasize);
-		pdma_base = NULL;
-	}
-}
-
-static void sun_fd_set_dma_mode(int mode)
-{
-	switch(mode) {
-	case DMA_MODE_READ:
-		doing_pdma = 1;
-		break;
-	case DMA_MODE_WRITE:
-		doing_pdma = 2;
-		break;
-	default:
-		printk("Unknown dma mode %d\n", mode);
-		panic("floppy: Giving up...");
-	}
-}
-
-static void sun_fd_set_dma_addr(char *buffer)
-{
-	pdma_vaddr = buffer;
-}
-
-static void sun_fd_set_dma_count(int length)
-{
-	pdma_size = length;
-}
-
-static void sun_fd_enable_dma(void)
-{
-	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
-	pdma_base = pdma_vaddr;
-	pdma_areasize = pdma_size;
-}
-
-irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie)
-{
-	if (likely(doing_pdma)) {
-		void __iomem *stat = (void __iomem *) fdc_status;
-		unsigned char *vaddr = pdma_vaddr;
-		unsigned long size = pdma_size;
-		u8 val;
-
-		while (size) {
-			val = readb(stat);
-			if (unlikely(!(val & 0x80))) {
-				pdma_vaddr = vaddr;
-				pdma_size = size;
-				return IRQ_HANDLED;
-			}
-			if (unlikely(!(val & 0x20))) {
-				pdma_vaddr = vaddr;
-				pdma_size = size;
-				doing_pdma = 0;
-				goto main_interrupt;
-			}
-			if (val & 0x40) {
-				/* read */
-				*vaddr++ = readb(stat + 1);
-			} else {
-				unsigned char data = *vaddr++;
-
-				/* write */
-				writeb(data, stat + 1);
-			}
-			size--;
-		}
-
-		pdma_vaddr = vaddr;
-		pdma_size = size;
-
-		/* Send Terminal Count pulse to floppy controller. */
-		val = readb(auxio_register);
-		val |= AUXIO_AUX1_FTCNT;
-		writeb(val, auxio_register);
-		val &= ~AUXIO_AUX1_FTCNT;
-		writeb(val, auxio_register);
-
-		doing_pdma = 0;
-	}
-
-main_interrupt:
-	return floppy_interrupt(irq, dev_cookie);
-}
-
-static int sun_fd_request_irq(void)
-{
-	static int once = 0;
-	int error;
-
-	if(!once) {
-		once = 1;
-
-		error = request_irq(FLOPPY_IRQ, sparc_floppy_irq, 
-				    IRQF_DISABLED, "floppy", NULL);
-
-		return ((error == 0) ? 0 : -1);
-	}
-	return 0;
-}
-
-static void sun_fd_free_irq(void)
-{
-}
-
-static unsigned int sun_get_dma_residue(void)
-{
-	/* XXX This isn't really correct. XXX */
-	return 0;
-}
-
-static int sun_fd_eject(int drive)
-{
-	set_dor(0x00, 0xff, 0x90);
-	udelay(500);
-	set_dor(0x00, 0x6f, 0x00);
-	udelay(500);
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-#include <asm/ebus.h>
-#include <asm/ns87303.h>
-
-static struct ebus_dma_info sun_pci_fd_ebus_dma;
-static struct pci_dev *sun_pci_ebus_dev;
-static int sun_pci_broken_drive = -1;
-
-struct sun_pci_dma_op {
-	unsigned int 	addr;
-	int		len;
-	int		direction;
-	char		*buf;
-};
-static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
-static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
-
-extern irqreturn_t floppy_interrupt(int irq, void *dev_id);
-
-static unsigned char sun_pci_fd_inb(unsigned long port)
-{
-	udelay(5);
-	return inb(port);
-}
-
-static void sun_pci_fd_outb(unsigned char val, unsigned long port)
-{
-	udelay(5);
-	outb(val, port);
-}
-
-static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
-{
-	udelay(5);
-	/*
-	 * XXX: Due to SUN's broken floppy connector on AX and AXi
-	 *      we need to turn on MOTOR_0 also, if the floppy is
-	 *      jumpered to DS1 (like most PC floppies are). I hope
-	 *      this does not hurt correct hardware like the AXmp.
-	 *      (Eddie, Sep 12 1998).
-	 */
-	if (port == ((unsigned long)sun_fdc) + 2) {
-		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
-			val |= 0x10;
-		}
-	}
-	outb(val, port);
-}
-
-#ifdef PCI_FDC_SWAP_DRIVES
-static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
-{
-	udelay(5);
-	/*
-	 * XXX: Due to SUN's broken floppy connector on AX and AXi
-	 *      we need to turn on MOTOR_0 also, if the floppy is
-	 *      jumpered to DS1 (like most PC floppies are). I hope
-	 *      this does not hurt correct hardware like the AXmp.
-	 *      (Eddie, Sep 12 1998).
-	 */
-	if (port == ((unsigned long)sun_fdc) + 2) {
-		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
-			val &= ~(0x03);
-			val |= 0x21;
-		}
-	}
-	outb(val, port);
-}
-#endif /* PCI_FDC_SWAP_DRIVES */
-
-static void sun_pci_fd_enable_dma(void)
-{
-	BUG_ON((NULL == sun_pci_dma_pending.buf) 	||
-	    (0	  == sun_pci_dma_pending.len) 	||
-	    (0	  == sun_pci_dma_pending.direction));
-
-	sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
-	sun_pci_dma_current.len = sun_pci_dma_pending.len;
-	sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
-
-	sun_pci_dma_pending.buf  = NULL;
-	sun_pci_dma_pending.len  = 0;
-	sun_pci_dma_pending.direction = 0;
-	sun_pci_dma_pending.addr = -1U;
-
-	sun_pci_dma_current.addr = 
-		pci_map_single(sun_pci_ebus_dev,
-			       sun_pci_dma_current.buf,
-			       sun_pci_dma_current.len,
-			       sun_pci_dma_current.direction);
-
-	ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
-
-	if (ebus_dma_request(&sun_pci_fd_ebus_dma,
-			     sun_pci_dma_current.addr,
-			     sun_pci_dma_current.len))
-		BUG();
-}
-
-static void sun_pci_fd_disable_dma(void)
-{
-	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
-	if (sun_pci_dma_current.addr != -1U)
-		pci_unmap_single(sun_pci_ebus_dev,
-				 sun_pci_dma_current.addr,
-				 sun_pci_dma_current.len,
-				 sun_pci_dma_current.direction);
-	sun_pci_dma_current.addr = -1U;
-}
-
-static void sun_pci_fd_set_dma_mode(int mode)
-{
-	if (mode == DMA_MODE_WRITE)
-		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
-	else
-		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
-
-	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
-}
-
-static void sun_pci_fd_set_dma_count(int length)
-{
-	sun_pci_dma_pending.len = length;
-}
-
-static void sun_pci_fd_set_dma_addr(char *buffer)
-{
-	sun_pci_dma_pending.buf = buffer;
-}
-
-static unsigned int sun_pci_get_dma_residue(void)
-{
-	return ebus_dma_residue(&sun_pci_fd_ebus_dma);
-}
-
-static int sun_pci_fd_request_irq(void)
-{
-	return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
-}
-
-static void sun_pci_fd_free_irq(void)
-{
-	ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
-}
-
-static int sun_pci_fd_eject(int drive)
-{
-	return -EINVAL;
-}
-
-void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
-{
-	floppy_interrupt(0, NULL);
-}
-
-/*
- * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
- * even if this is configured using DS1, thus looks like /dev/fd1 with
- * the cabling used in Ultras.
- */
-#define DOR	(port + 2)
-#define MSR	(port + 4)
-#define FIFO	(port + 5)
-
-static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
-			        unsigned long reg)
-{
-	unsigned char status;
-	int timeout = 1000;
-
-	while (!((status = inb(MSR)) & 0x80) && --timeout)
-		udelay(100);
-	outb(val, reg);
-}
-
-static unsigned char sun_pci_fd_sensei(unsigned long port)
-{
-	unsigned char result[2] = { 0x70, 0x00 };
-	unsigned char status;
-	int i = 0;
-
-	sun_pci_fd_out_byte(port, 0x08, FIFO);
-	do {
-		int timeout = 1000;
-
-		while (!((status = inb(MSR)) & 0x80) && --timeout)
-			udelay(100);
-
-		if (!timeout)
-			break;
-
-		if ((status & 0xf0) == 0xd0)
-			result[i++] = inb(FIFO);
-		else
-			break;
-	} while (i < 2);
-
-	return result[0];
-}
-
-static void sun_pci_fd_reset(unsigned long port)
-{
-	unsigned char mask = 0x00;
-	unsigned char status;
-	int timeout = 10000;
-
-	outb(0x80, MSR);
-	do {
-		status = sun_pci_fd_sensei(port);
-		if ((status & 0xc0) == 0xc0)
-			mask |= 1 << (status & 0x03);
-		else
-			udelay(100);
-	} while ((mask != 0x0f) && --timeout);
-}
-
-static int sun_pci_fd_test_drive(unsigned long port, int drive)
-{
-	unsigned char status, data;
-	int timeout = 1000;
-	int ready;
-
-	sun_pci_fd_reset(port);
-
-	data = (0x10 << drive) | 0x0c | drive;
-	sun_pci_fd_out_byte(port, data, DOR);
-
-	sun_pci_fd_out_byte(port, 0x07, FIFO);
-	sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
-
-	do {
-		udelay(100);
-		status = sun_pci_fd_sensei(port);
-	} while (((status & 0xc0) == 0x80) && --timeout);
-
-	if (!timeout)
-		ready = 0;
-	else
-		ready = (status & 0x10) ? 0 : 1;
-
-	sun_pci_fd_reset(port);
-	return ready;
-}
-#undef FIFO
-#undef MSR
-#undef DOR
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_PCI
-static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
-{
-	if (!strcmp(edev->prom_node->name, "fdthree"))
-		return 1;
-	if (!strcmp(edev->prom_node->name, "floppy")) {
-		const char *compat;
-
-		compat = of_get_property(edev->prom_node,
-					 "compatible", NULL);
-		if (compat && !strcmp(compat, "fdthree"))
-			return 1;
-	}
-	return 0;
-}
-#endif
-
-static unsigned long __init sun_floppy_init(void)
-{
-	char state[128];
-	struct sbus_bus *bus;
-	struct sbus_dev *sdev = NULL;
-	static int initialized = 0;
-
-	if (initialized)
-		return sun_floppy_types[0];
-	initialized = 1;
-
-	for_all_sbusdev (sdev, bus) {
-		if (!strcmp(sdev->prom_name, "SUNW,fdtwo")) 
-			break;
-	}
-	if(sdev) {
-		floppy_sdev = sdev;
-		FLOPPY_IRQ = sdev->irqs[0];
-	} else {
-#ifdef CONFIG_PCI
-		struct linux_ebus *ebus;
-		struct linux_ebus_device *edev = NULL;
-		unsigned long config = 0;
-		void __iomem *auxio_reg;
-		const char *state_prop;
-
-		for_each_ebus(ebus) {
-			for_each_ebusdev(edev, ebus) {
-				if (ebus_fdthree_p(edev))
-					goto ebus_done;
-			}
-		}
-	ebus_done:
-		if (!edev)
-			return 0;
-
-		state_prop = of_get_property(edev->prom_node, "status", NULL);
-		if (state_prop && !strncmp(state_prop, "disabled", 8))
-			return 0;
-			
-		FLOPPY_IRQ = edev->irqs[0];
-
-		/* Make sure the high density bit is set, some systems
-		 * (most notably Ultra5/Ultra10) come up with it clear.
-		 */
-		auxio_reg = (void __iomem *) edev->resource[2].start;
-		writel(readl(auxio_reg)|0x2, auxio_reg);
-
-		sun_pci_ebus_dev = ebus->self;
-
-		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
-
-		/* XXX ioremap */
-		sun_pci_fd_ebus_dma.regs = (void __iomem *)
-			edev->resource[1].start;
-		if (!sun_pci_fd_ebus_dma.regs)
-			return 0;
-
-		sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
-					     EBUS_DMA_FLAG_TCI_DISABLE);
-		sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
-		sun_pci_fd_ebus_dma.client_cookie = NULL;
-		sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
-		strcpy(sun_pci_fd_ebus_dma.name, "floppy");
-		if (ebus_dma_register(&sun_pci_fd_ebus_dma))
-			return 0;
-
-		/* XXX ioremap */
-		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
-
-		sun_fdops.fd_inb = sun_pci_fd_inb;
-		sun_fdops.fd_outb = sun_pci_fd_outb;
-
-		can_use_virtual_dma = use_virtual_dma = 0;
-		sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
-		sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
-		sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
-		sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
-		sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
-		sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
-
-		sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
-		sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
-
-		sun_fdops.fd_eject = sun_pci_fd_eject;
-
-        	fdc_status = (unsigned long) &sun_fdc->status_82077;
-
-		/*
-		 * XXX: Find out on which machines this is really needed.
-		 */
-		if (1) {
-			sun_pci_broken_drive = 1;
-			sun_fdops.fd_outb = sun_pci_fd_broken_outb;
-		}
-
-		allowed_drive_mask = 0;
-		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
-			sun_floppy_types[0] = 4;
-		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
-			sun_floppy_types[1] = 4;
-
-		/*
-		 * Find NS87303 SuperIO config registers (through ecpp).
-		 */
-		for_each_ebus(ebus) {
-			for_each_ebusdev(edev, ebus) {
-				if (!strcmp(edev->prom_node->name, "ecpp")) {
-					config = edev->resource[1].start;
-					goto config_done;
-				}
-			}
-		}
-	config_done:
-
-		/*
-		 * Sanity check, is this really the NS87303?
-		 */
-		switch (config & 0x3ff) {
-		case 0x02e:
-		case 0x15c:
-		case 0x26e:
-		case 0x398:
-			break;
-		default:
-			config = 0;
-		}
-
-		if (!config)
-			return sun_floppy_types[0];
-
-		/* Enable PC-AT mode. */
-		ns87303_modify(config, ASC, 0, 0xc0);
-
-#ifdef PCI_FDC_SWAP_DRIVES
-		/*
-		 * If only Floppy 1 is present, swap drives.
-		 */
-		if (!sun_floppy_types[0] && sun_floppy_types[1]) {
-			/*
-			 * Set the drive exchange bit in FCR on NS87303,
-			 * make sure other bits are sane before doing so.
-			 */
-			ns87303_modify(config, FER, FER_EDM, 0);
-			ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
-			ns87303_modify(config, FCR, 0, FCR_LDE);
-
-			config = sun_floppy_types[0];
-			sun_floppy_types[0] = sun_floppy_types[1];
-			sun_floppy_types[1] = config;
-
-			if (sun_pci_broken_drive != -1) {
-				sun_pci_broken_drive = 1 - sun_pci_broken_drive;
-				sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
-			}
-		}
-#endif /* PCI_FDC_SWAP_DRIVES */
-
-		return sun_floppy_types[0];
-#else
-		return 0;
-#endif
-	}
-	prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
-	if(!strncmp(state, "disabled", 8))
-		return 0;
-
-	/*
-	 * We cannot do sbus_ioremap here: it does request_region,
-	 * which the generic floppy driver tries to do once again.
-	 * But we must use the sdev resource values as they have
-	 * had parent ranges applied.
-	 */
-	sun_fdc = (struct sun_flpy_controller *)
-		(sdev->resource[0].start +
-		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
-
-	/* Last minute sanity check... */
-	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
-		sun_fdc = (struct sun_flpy_controller *)-1;
-		return 0;
-	}
-
-        sun_fdops.fd_inb = sun_82077_fd_inb;
-        sun_fdops.fd_outb = sun_82077_fd_outb;
-
-	can_use_virtual_dma = use_virtual_dma = 1;
-	sun_fdops.fd_enable_dma = sun_fd_enable_dma;
-	sun_fdops.fd_disable_dma = sun_fd_disable_dma;
-	sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
-	sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
-	sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
-	sun_fdops.get_dma_residue = sun_get_dma_residue;
-
-	sun_fdops.fd_request_irq = sun_fd_request_irq;
-	sun_fdops.fd_free_irq = sun_fd_free_irq;
-
-	sun_fdops.fd_eject = sun_fd_eject;
-
-        fdc_status = (unsigned long) &sun_fdc->status_82077;
-
-	/* Success... */
-	allowed_drive_mask = 0x01;
-	sun_floppy_types[0] = 4;
-	sun_floppy_types[1] = 0;
-
-	return sun_floppy_types[0];
-}
-
-#define EXTRA_FLOPPY_PARAMS
-
-static DEFINE_SPINLOCK(dma_spin_lock);
-
-#define claim_dma_lock() \
-({	unsigned long flags; \
-	spin_lock_irqsave(&dma_spin_lock, flags); \
-	flags; \
-})
-
-#define release_dma_lock(__flags) \
-	spin_unlock_irqrestore(&dma_spin_lock, __flags);
-
-#endif /* !(__ASM_SPARC64_FLOPPY_H) */
diff --git a/include/asm-sparc64/fpumacro.h b/include/asm-sparc64/fpumacro.h
deleted file mode 100644
index cc463fec806f..000000000000
--- a/include/asm-sparc64/fpumacro.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* fpumacro.h: FPU related macros.
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC64_FPUMACRO_H
-#define _SPARC64_FPUMACRO_H
-
-#include <asm/asi.h>
-#include <asm/visasm.h>
-
-struct fpustate {
-	u32	regs[64];
-};
-
-#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
-
-static inline unsigned long fprs_read(void)
-{
-	unsigned long retval;
-
-	__asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
-
-	return retval;
-}
-
-static inline void fprs_write(unsigned long val)
-{
-	__asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
-}
-
-#endif /* !(_SPARC64_FPUMACRO_H) */
diff --git a/include/asm-sparc64/ftrace.h b/include/asm-sparc64/ftrace.h
deleted file mode 100644
index d27716cd38c1..000000000000
--- a/include/asm-sparc64/ftrace.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_SPARC64_FTRACE
-#define _ASM_SPARC64_FTRACE
-
-#ifdef CONFIG_MCOUNT
-#define MCOUNT_ADDR		((long)(_mcount))
-#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
-
-#ifndef __ASSEMBLY__
-extern void _mcount(void);
-#endif
-
-#endif
-
-#endif /* _ASM_SPARC64_FTRACE */
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
deleted file mode 100644
index d8378935ae90..000000000000
--- a/include/asm-sparc64/futex.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef _SPARC64_FUTEX_H
-#define _SPARC64_FUTEX_H
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-#include <asm/system.h>
-
-#define __futex_cas_op(insn, ret, oldval, uaddr, oparg)	\
-	__asm__ __volatile__(				\
-	"\n1:	lduwa	[%3] %%asi, %2\n"		\
-	"	" insn "\n"				\
-	"2:	casa	[%3] %%asi, %2, %1\n"		\
-	"	cmp	%2, %1\n"			\
-	"	bne,pn	%%icc, 1b\n"			\
-	"	 mov	0, %0\n"			\
-	"3:\n"						\
-	"	.section .fixup,#alloc,#execinstr\n"	\
-	"	.align	4\n"				\
-	"4:	sethi	%%hi(3b), %0\n"			\
-	"	jmpl	%0 + %%lo(3b), %%g0\n"		\
-	"	 mov	%5, %0\n"			\
-	"	.previous\n"				\
-	"	.section __ex_table,\"a\"\n"		\
-	"	.align	4\n"				\
-	"	.word	1b, 4b\n"			\
-	"	.word	2b, 4b\n"			\
-	"	.previous\n"				\
-	: "=&r" (ret), "=&r" (oldval), "=&r" (tem)	\
-	: "r" (uaddr), "r" (oparg), "i" (-EFAULT)	\
-	: "memory")
-
-static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret, tem;
-
-	if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
-		return -EFAULT;
-	if (unlikely((((unsigned long) uaddr) & 0x3UL)))
-		return -EINVAL;
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	pagefault_disable();
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
-	__asm__ __volatile__(
-	"\n1:	casa	[%3] %%asi, %2, %0\n"
-	"2:\n"
-	"	.section .fixup,#alloc,#execinstr\n"
-	"	.align	4\n"
-	"3:	sethi	%%hi(2b), %0\n"
-	"	jmpl	%0 + %%lo(2b), %%g0\n"
-	"	 mov	%4, %0\n"
-	"	.previous\n"
-	"	.section __ex_table,\"a\"\n"
-	"	.align	4\n"
-	"	.word	1b, 3b\n"
-	"	.previous\n"
-	: "=r" (newval)
-	: "0" (newval), "r" (oldval), "r" (uaddr), "i" (-EFAULT)
-	: "memory");
-
-	return newval;
-}
-
-#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/include/asm-sparc64/hardirq.h b/include/asm-sparc64/hardirq.h
deleted file mode 100644
index 7c29fd1a87aa..000000000000
--- a/include/asm-sparc64/hardirq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* hardirq.h: 64-bit Sparc hard IRQ support.
- *
- * Copyright (C) 1997, 1998, 2005 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef __SPARC64_HARDIRQ_H
-#define __SPARC64_HARDIRQ_H
-
-#include <asm/cpudata.h>
-
-#define __ARCH_IRQ_STAT
-#define local_softirq_pending() \
-	(local_cpu_data().__softirq_pending)
-
-void ack_bad_irq(unsigned int irq);
-
-#define HARDIRQ_BITS	8
-
-#endif /* !(__SPARC64_HARDIRQ_H) */
diff --git a/include/asm-sparc64/head.h b/include/asm-sparc64/head.h
deleted file mode 100644
index 10e9dabc4c41..000000000000
--- a/include/asm-sparc64/head.h
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef _SPARC64_HEAD_H
-#define _SPARC64_HEAD_H
-
-#include <asm/pstate.h>
-
-	/* wrpr	%g0, val, %gl */
-#define SET_GL(val)	\
-	.word	0xa1902000 | val
-
-	/* rdpr %gl, %gN */
-#define GET_GL_GLOBAL(N)	\
-	.word	0x81540000 | (N << 25)
-
-#define KERNBASE	0x400000
-
-#define	PTREGS_OFF	(STACK_BIAS + STACKFRAME_SZ)
-
-#define __CHEETAH_ID	0x003e0014
-#define __JALAPENO_ID	0x003e0016
-#define __SERRANO_ID	0x003e0022
-
-#define CHEETAH_MANUF		0x003e
-#define CHEETAH_IMPL		0x0014 /* Ultra-III   */
-#define CHEETAH_PLUS_IMPL	0x0015 /* Ultra-III+  */
-#define JALAPENO_IMPL		0x0016 /* Ultra-IIIi  */
-#define JAGUAR_IMPL		0x0018 /* Ultra-IV    */
-#define PANTHER_IMPL		0x0019 /* Ultra-IV+   */
-#define SERRANO_IMPL		0x0022 /* Ultra-IIIi+ */
-
-#define BRANCH_IF_SUN4V(tmp1,label)		\
-	sethi	%hi(is_sun4v), %tmp1;		\
-	lduw	[%tmp1 + %lo(is_sun4v)], %tmp1; \
-	brnz,pn	%tmp1, label;			\
-	 nop
-
-#define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label)	\
-	rdpr	%ver, %tmp1;			\
-	sethi	%hi(__CHEETAH_ID), %tmp2;	\
-	srlx	%tmp1, 32, %tmp1;		\
-	or	%tmp2, %lo(__CHEETAH_ID), %tmp2;\
-	cmp	%tmp1, %tmp2;			\
-	be,pn	%icc, label;			\
-	 nop;
-
-#define BRANCH_IF_JALAPENO(tmp1,tmp2,label)	\
-	rdpr	%ver, %tmp1;			\
-	sethi	%hi(__JALAPENO_ID), %tmp2;	\
-	srlx	%tmp1, 32, %tmp1;		\
-	or	%tmp2, %lo(__JALAPENO_ID), %tmp2;\
-	cmp	%tmp1, %tmp2;			\
-	be,pn	%icc, label;			\
-	 nop;
-
-#define BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(tmp1,tmp2,label)	\
-	rdpr	%ver, %tmp1;			\
-	srlx	%tmp1, (32 + 16), %tmp2;	\
-	cmp	%tmp2, CHEETAH_MANUF;		\
-	bne,pt	%xcc, 99f;			\
-	 sllx	%tmp1, 16, %tmp1;		\
-	srlx	%tmp1, (32 + 16), %tmp2;	\
-	cmp	%tmp2, CHEETAH_PLUS_IMPL;	\
-	bgeu,pt	%xcc, label;			\
-99:	 nop;
-
-#define BRANCH_IF_ANY_CHEETAH(tmp1,tmp2,label)	\
-	rdpr	%ver, %tmp1;			\
-	srlx	%tmp1, (32 + 16), %tmp2;	\
-	cmp	%tmp2, CHEETAH_MANUF;		\
-	bne,pt	%xcc, 99f;			\
-	 sllx	%tmp1, 16, %tmp1;		\
-	srlx	%tmp1, (32 + 16), %tmp2;	\
-	cmp	%tmp2, CHEETAH_IMPL;		\
-	bgeu,pt	%xcc, label;			\
-99:	 nop;
-
-#endif /* !(_SPARC64_HEAD_H) */
diff --git a/include/asm-sparc64/hugetlb.h b/include/asm-sparc64/hugetlb.h
deleted file mode 100644
index 412af58926a0..000000000000
--- a/include/asm-sparc64/hugetlb.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _ASM_SPARC64_HUGETLB_H
-#define _ASM_SPARC64_HUGETLB_H
-
-#include <asm/page.h>
-
-
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-		     pte_t *ptep, pte_t pte);
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep);
-
-void hugetlb_prefault_arch_hook(struct mm_struct *mm);
-
-static inline int is_hugepage_only_range(struct mm_struct *mm,
-					 unsigned long addr,
-					 unsigned long len) {
-	return 0;
-}
-
-/*
- * If the arch doesn't supply something else, assume that hugepage
- * size aligned regions are ok without further preparation.
- */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
-{
-	if (len & ~HPAGE_MASK)
-		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
-		return -EINVAL;
-	return 0;
-}
-
-static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
-					  unsigned long addr, unsigned long end,
-					  unsigned long floor,
-					  unsigned long ceiling)
-{
-	free_pgd_range(tlb, addr, end, floor, ceiling);
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long addr, pte_t *ptep)
-{
-}
-
-static inline int huge_pte_none(pte_t pte)
-{
-	return pte_none(pte);
-}
-
-static inline pte_t huge_pte_wrprotect(pte_t pte)
-{
-	return pte_wrprotect(pte);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	ptep_set_wrprotect(mm, addr, ptep);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
-					     unsigned long addr, pte_t *ptep,
-					     pte_t pte, int dirty)
-{
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
-
-static inline pte_t huge_ptep_get(pte_t *ptep)
-{
-	return *ptep;
-}
-
-static inline int arch_prepare_hugepage(struct page *page)
-{
-	return 0;
-}
-
-static inline void arch_release_hugepage(struct page *page)
-{
-}
-
-#endif /* _ASM_SPARC64_HUGETLB_H */
diff --git a/include/asm-sparc64/hvtramp.h b/include/asm-sparc64/hvtramp.h
deleted file mode 100644
index b2b9b947b3a4..000000000000
--- a/include/asm-sparc64/hvtramp.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _SPARC64_HVTRAP_H
-#define _SPARC64_HVTRAP_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-struct hvtramp_mapping {
-	__u64		vaddr;
-	__u64		tte;
-};
-
-struct hvtramp_descr {
-	__u32			cpu;
-	__u32			num_mappings;
-	__u64			fault_info_va;
-	__u64			fault_info_pa;
-	__u64			thread_reg;
-	struct hvtramp_mapping	maps[1];
-};
-
-extern void hv_cpu_startup(unsigned long hvdescr_pa);
-
-#endif
-
-#define HVTRAMP_DESCR_CPU		0x00
-#define HVTRAMP_DESCR_NUM_MAPPINGS	0x04
-#define HVTRAMP_DESCR_FAULT_INFO_VA	0x08
-#define HVTRAMP_DESCR_FAULT_INFO_PA	0x10
-#define HVTRAMP_DESCR_THREAD_REG	0x18
-#define HVTRAMP_DESCR_MAPS		0x20
-
-#define HVTRAMP_MAPPING_VADDR		0x00
-#define HVTRAMP_MAPPING_TTE		0x08
-#define HVTRAMP_MAPPING_SIZE		0x10
-
-#endif /* _SPARC64_HVTRAP_H */
diff --git a/include/asm-sparc64/hw_irq.h b/include/asm-sparc64/hw_irq.h
deleted file mode 100644
index 8e44a8360829..000000000000
--- a/include/asm-sparc64/hw_irq.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SPARC64_HW_IRQ_H
-#define __ASM_SPARC64_HW_IRQ_H
-
-#endif
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
deleted file mode 100644
index 3ad45dff52f8..000000000000
--- a/include/asm-sparc64/hypervisor.h
+++ /dev/null
@@ -1,2945 +0,0 @@
-#ifndef _SPARC64_HYPERVISOR_H
-#define _SPARC64_HYPERVISOR_H
-
-/* Sun4v hypervisor interfaces and defines.
- *
- * Hypervisor calls are made via traps to software traps number 0x80
- * and above.  Registers %o0 to %o5 serve as argument, status, and
- * return value registers.
- *
- * There are two kinds of these traps.  First there are the normal
- * "fast traps" which use software trap 0x80 and encode the function
- * to invoke by number in register %o5.  Argument and return value
- * handling is as follows:
- *
- * -----------------------------------------------
- * |  %o5  | function number |     undefined     |
- * |  %o0  |   argument 0    |   return status   |
- * |  %o1  |   argument 1    |   return value 1  |
- * |  %o2  |   argument 2    |   return value 2  |
- * |  %o3  |   argument 3    |   return value 3  |
- * |  %o4  |   argument 4    |   return value 4  |
- * -----------------------------------------------
- *
- * The second type are "hyper-fast traps" which encode the function
- * number in the software trap number itself.  So these use trap
- * numbers > 0x80.  The register usage for hyper-fast traps is as
- * follows:
- *
- * -----------------------------------------------
- * |  %o0  |   argument 0    |   return status   |
- * |  %o1  |   argument 1    |   return value 1  |
- * |  %o2  |   argument 2    |   return value 2  |
- * |  %o3  |   argument 3    |   return value 3  |
- * |  %o4  |   argument 4    |   return value 4  |
- * -----------------------------------------------
- *
- * Registers providing explicit arguments to the hypervisor calls
- * are volatile across the call.  Upon return their values are
- * undefined unless explicitly specified as containing a particular
- * return value by the specific call.  The return status is always
- * returned in register %o0, zero indicates a successful execution of
- * the hypervisor call and other values indicate an error status as
- * defined below.  So, for example, if a hyper-fast trap takes
- * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
- * the call and %o3, %o4, and %o5 would be preserved.
- *
- * If the hypervisor trap is invalid, or the fast trap function number
- * is invalid, HV_EBADTRAP will be returned in %o0.  Also, all 64-bits
- * of the argument and return values are significant.
- */
-
-/* Trap numbers.  */
-#define HV_FAST_TRAP		0x80
-#define HV_MMU_MAP_ADDR_TRAP	0x83
-#define HV_MMU_UNMAP_ADDR_TRAP	0x84
-#define HV_TTRACE_ADDENTRY_TRAP	0x85
-#define HV_CORE_TRAP		0xff
-
-/* Error codes.  */
-#define HV_EOK				0  /* Successful return            */
-#define HV_ENOCPU			1  /* Invalid CPU id               */
-#define HV_ENORADDR			2  /* Invalid real address         */
-#define HV_ENOINTR			3  /* Invalid interrupt id         */
-#define HV_EBADPGSZ			4  /* Invalid pagesize encoding    */
-#define HV_EBADTSB			5  /* Invalid TSB description      */
-#define HV_EINVAL			6  /* Invalid argument             */
-#define HV_EBADTRAP			7  /* Invalid function number      */
-#define HV_EBADALIGN			8  /* Invalid address alignment    */
-#define HV_EWOULDBLOCK			9  /* Cannot complete w/o blocking */
-#define HV_ENOACCESS			10 /* No access to resource        */
-#define HV_EIO				11 /* I/O error                    */
-#define HV_ECPUERROR			12 /* CPU in error state           */
-#define HV_ENOTSUPPORTED		13 /* Function not supported       */
-#define HV_ENOMAP			14 /* No mapping found             */
-#define HV_ETOOMANY			15 /* Too many items specified     */
-#define HV_ECHANNEL			16 /* Invalid LDC channel          */
-#define HV_EBUSY			17 /* Resource busy                */
-
-/* mach_exit()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MACH_EXIT
- * ARG0:	exit code
- * ERRORS:	This service does not return.
- *
- * Stop all CPUs in the virtual domain and place them into the stopped
- * state.  The 64-bit exit code may be passed to a service entity as
- * the domain's exit status.  On systems without a service entity, the
- * domain will undergo a reset, and the boot firmware will be
- * reloaded.
- *
- * This function will never return to the guest that invokes it.
- *
- * Note: By convention an exit code of zero denotes a successful exit by
- *       the guest code.  A non-zero exit code denotes a guest specific
- *       error indication.
- *
- */
-#define HV_FAST_MACH_EXIT		0x00
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mach_exit(unsigned long exit_code);
-#endif
-
-/* Domain services.  */
-
-/* mach_desc()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MACH_DESC
- * ARG0:	buffer
- * ARG1:	length
- * RET0:	status
- * RET1:	length
- * ERRORS:	HV_EBADALIGN	Buffer is badly aligned
- *		HV_ENORADDR	Buffer is to an illegal real address.
- *		HV_EINVAL	Buffer length is too small for complete
- *				machine description.
- *
- * Copy the most current machine description into the buffer indicated
- * by the real address in ARG0.  The buffer provided must be 16 byte
- * aligned.  Upon success or HV_EINVAL, this service returns the
- * actual size of the machine description in the RET1 return value.
- *
- * Note: A method of determining the appropriate buffer size for the
- *       machine description is to first call this service with a buffer
- *       length of 0 bytes.
- */
-#define HV_FAST_MACH_DESC		0x01
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
-				     unsigned long buf_len,
-				     unsigned long *real_buf_len);
-#endif
-
-/* mach_sir()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MACH_SIR
- * ERRORS:	This service does not return.
- *
- * Perform a software initiated reset of the virtual machine domain.
- * All CPUs are captured as soon as possible, all hardware devices are
- * returned to the entry default state, and the domain is restarted at
- * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
- * of the CPUs.  The single CPU restarted is selected as determined by
- * platform specific policy.  Memory is preserved across this
- * operation.
- */
-#define HV_FAST_MACH_SIR		0x02
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mach_sir(void);
-#endif
-
-/* mach_set_watchdog()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MACH_SET_WATCHDOG
- * ARG0:	timeout in milliseconds
- * RET0:	status
- * RET1:	time remaining in milliseconds
- *
- * A guest uses this API to set a watchdog timer.  Once the gues has set
- * the timer, it must call the timer service again either to disable or
- * postpone the expiration.  If the timer expires before being reset or
- * disabled, then the hypervisor take a platform specific action leading
- * to guest termination within a bounded time period.  The platform action
- * may include recovery actions such as reporting the expiration to a
- * Service Processor, and/or automatically restarting the gues.
- *
- * The 'timeout' parameter is specified in milliseconds, however the
- * implementated granularity is given by the 'watchdog-resolution'
- * property in the 'platform' node of the guest's machine description.
- * The largest allowed timeout value is specified by the
- * 'watchdog-max-timeout' property of the 'platform' node.
- *
- * If the 'timeout' argument is not zero, the watchdog timer is set to
- * expire after a minimum of 'timeout' milliseconds.
- *
- * If the 'timeout' argument is zero, the watchdog timer is disabled.
- *
- * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
- * property, the hypervisor leaves the watchdog timer state unchanged,
- * and returns a status of EINVAL.
- *
- * The 'time remaining' return value is valid regardless of whether the
- * return status is EOK or EINVAL.  A non-zero return value indicates the
- * number of milliseconds that were remaining until the timer was to expire.
- * If less than one millisecond remains, the return value is '1'.  If the
- * watchdog timer was disabled at the time of the call, the return value is
- * zero.
- *
- * If the hypervisor cannot support the exact timeout value requested, but
- * can support a larger timeout value, the hypervisor may round the actual
- * timeout to a value larger than the requested timeout, consequently the
- * 'time remaining' return value may be larger than the previously requested
- * timeout value.
- *
- * Any guest OS debugger should be aware that the watchdog service may be in
- * use.  Consequently, it is recommended that the watchdog service is
- * disabled upon debugger entry (e.g. reaching a breakpoint), and then
- * re-enabled upon returning to normal execution.  The API has been designed
- * with this in mind, and the 'time remaining' result of the disable call may
- * be used directly as the timeout argument of the re-enable call.
- */
-#define HV_FAST_MACH_SET_WATCHDOG	0x05
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
-					     unsigned long *orig_timeout);
-#endif
-
-/* CPU services.
- *
- * CPUs represent devices that can execute software threads.  A single
- * chip that contains multiple cores or strands is represented as
- * multiple CPUs with unique CPU identifiers.  CPUs are exported to
- * OBP via the machine description (and to the OS via the OBP device
- * tree).  CPUs are always in one of three states: stopped, running,
- * or error.
- *
- * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
- * CPU within a logical domain.  Operations that are to be performed
- * on multiple CPUs specify them via a CPU list.  A CPU list is an
- * array in real memory, of which each 16-bit word is a CPU ID.  CPU
- * lists are passed through the API as two arguments.  The first is
- * the number of entries (16-bit words) in the CPU list, and the
- * second is the (real address) pointer to the CPU ID list.
- */
-
-/* cpu_start()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_START
- * ARG0:	CPU ID
- * ARG1:	PC
- * ARG2:	RTBA
- * ARG3:	target ARG0
- * RET0:	status
- * ERRORS:	ENOCPU		Invalid CPU ID
- *		EINVAL		Target CPU ID is not in the stopped state
- *		ENORADDR	Invalid PC or RTBA real address
- *		EBADALIGN	Unaligned PC or unaligned RTBA
- *		EWOULDBLOCK	Starting resources are not available
- *
- * Start CPU with given CPU ID with PC in %pc and with a real trap
- * base address value of RTBA.  The indicated CPU must be in the
- * stopped state.  The supplied RTBA must be aligned on a 256 byte
- * boundary.  On successful completion, the specified CPU will be in
- * the running state and will be supplied with "target ARG0" in %o0
- * and RTBA in %tba.
- */
-#define HV_FAST_CPU_START		0x10
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_start(unsigned long cpuid,
-				     unsigned long pc,
-				     unsigned long rtba,
-				     unsigned long arg0);
-#endif
-
-/* cpu_stop()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_STOP
- * ARG0:	CPU ID
- * RET0:	status
- * ERRORS:	ENOCPU		Invalid CPU ID
- *		EINVAL		Target CPU ID is the current cpu
- *		EINVAL		Target CPU ID is not in the running state
- *		EWOULDBLOCK	Stopping resources are not available
- *		ENOTSUPPORTED	Not supported on this platform
- *
- * The specified CPU is stopped.  The indicated CPU must be in the
- * running state.  On completion, it will be in the stopped state.  It
- * is not legal to stop the current CPU.
- *
- * Note: As this service cannot be used to stop the current cpu, this service
- *       may not be used to stop the last running CPU in a domain.  To stop
- *       and exit a running domain, a guest must use the mach_exit() service.
- */
-#define HV_FAST_CPU_STOP		0x11
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
-#endif
-
-/* cpu_yield()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_YIELD
- * RET0:	status
- * ERRORS:	No possible error.
- *
- * Suspend execution on the current CPU.  Execution will resume when
- * an interrupt (device, %stick_compare, or cross-call) is targeted to
- * the CPU.  On some CPUs, this API may be used by the hypervisor to
- * save power by disabling hardware strands.
- */
-#define HV_FAST_CPU_YIELD		0x12
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_yield(void);
-#endif
-
-/* cpu_qconf()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_QCONF
- * ARG0:	queue
- * ARG1:	base real address
- * ARG2:	number of entries
- * RET0:	status
- * ERRORS:	ENORADDR	Invalid base real address
- *		EINVAL		Invalid queue or number of entries is less
- *				than 2 or too large.
- *		EBADALIGN	Base real address is not correctly aligned
- *				for size.
- *
- * Configure the given queue to be placed at the given base real
- * address, with the given number of entries.  The number of entries
- * must be a power of 2.  The base real address must be aligned
- * exactly to match the queue size.  Each queue entry is 64 bytes
- * long, so for example a 32 entry queue must be aligned on a 2048
- * byte real address boundary.
- *
- * The specified queue is unconfigured if the number of entries is given
- * as zero.
- *
- * For the current version of this API service, the argument queue is defined
- * as follows:
- *
- *	queue		description
- *	-----		-------------------------
- *	0x3c		cpu mondo queue
- *	0x3d		device mondo queue
- *	0x3e		resumable error queue
- *	0x3f		non-resumable error queue
- *
- * Note: The maximum number of entries for each queue for a specific cpu may
- *       be determined from the machine description.
- */
-#define HV_FAST_CPU_QCONF		0x14
-#define  HV_CPU_QUEUE_CPU_MONDO		 0x3c
-#define  HV_CPU_QUEUE_DEVICE_MONDO	 0x3d
-#define  HV_CPU_QUEUE_RES_ERROR		 0x3e
-#define  HV_CPU_QUEUE_NONRES_ERROR	 0x3f
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_qconf(unsigned long type,
-				     unsigned long queue_paddr,
-				     unsigned long num_queue_entries);
-#endif
-
-/* cpu_qinfo()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_QINFO
- * ARG0:	queue
- * RET0:	status
- * RET1:	base real address
- * RET1:	number of entries
- * ERRORS:	EINVAL		Invalid queue
- *
- * Return the configuration info for the given queue.  The base real
- * address and number of entries of the defined queue are returned.
- * The queue argument values are the same as for cpu_qconf() above.
- *
- * If the specified queue is a valid queue number, but no queue has
- * been defined, the number of entries will be set to zero and the
- * base real address returned is undefined.
- */
-#define HV_FAST_CPU_QINFO		0x15
-
-/* cpu_mondo_send()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_MONDO_SEND
- * ARG0-1:	CPU list
- * ARG2:	data real address
- * RET0:	status
- * ERRORS:	EBADALIGN	Mondo data is not 64-byte aligned or CPU list
- *				is not 2-byte aligned.
- *		ENORADDR	Invalid data mondo address, or invalid cpu list
- *				address.
- *		ENOCPU		Invalid cpu in CPU list
- *		EWOULDBLOCK	Some or all of the listed CPUs did not receive
- *				the mondo
- *		ECPUERROR	One or more of the listed CPUs are in error
- *				state, use HV_FAST_CPU_STATE to see which ones
- *		EINVAL		CPU list includes caller's CPU ID
- *
- * Send a mondo interrupt to the CPUs in the given CPU list with the
- * 64-bytes at the given data real address.  The data must be 64-byte
- * aligned.  The mondo data will be delivered to the cpu_mondo queues
- * of the recipient CPUs.
- *
- * In all cases, error or not, the CPUs in the CPU list to which the
- * mondo has been successfully delivered will be indicated by having
- * their entry in CPU list updated with the value 0xffff.
- */
-#define HV_FAST_CPU_MONDO_SEND		0x42
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
-#endif
-
-/* cpu_myid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_MYID
- * RET0:	status
- * RET1:	CPU ID
- * ERRORS:	No errors defined.
- *
- * Return the hypervisor ID handle for the current CPU.  Use by a
- * virtual CPU to discover it's own identity.
- */
-#define HV_FAST_CPU_MYID		0x16
-
-/* cpu_state()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_STATE
- * ARG0:	CPU ID
- * RET0:	status
- * RET1:	state
- * ERRORS:	ENOCPU		Invalid CPU ID
- *
- * Retrieve the current state of the CPU with the given CPU ID.
- */
-#define HV_FAST_CPU_STATE		0x17
-#define  HV_CPU_STATE_STOPPED		 0x01
-#define  HV_CPU_STATE_RUNNING		 0x02
-#define  HV_CPU_STATE_ERROR		 0x03
-
-#ifndef __ASSEMBLY__
-extern long sun4v_cpu_state(unsigned long cpuid);
-#endif
-
-/* cpu_set_rtba()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_SET_RTBA
- * ARG0:	RTBA
- * RET0:	status
- * RET1:	previous RTBA
- * ERRORS:	ENORADDR	Invalid RTBA real address
- *		EBADALIGN	RTBA is incorrectly aligned for a trap table
- *
- * Set the real trap base address of the local cpu to the given RTBA.
- * The supplied RTBA must be aligned on a 256 byte boundary.  Upon
- * success the previous value of the RTBA is returned in RET1.
- *
- * Note: This service does not affect %tba
- */
-#define HV_FAST_CPU_SET_RTBA		0x18
-
-/* cpu_set_rtba()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CPU_GET_RTBA
- * RET0:	status
- * RET1:	previous RTBA
- * ERRORS:	No possible error.
- *
- * Returns the current value of RTBA in RET1.
- */
-#define HV_FAST_CPU_GET_RTBA		0x19
-
-/* MMU services.
- *
- * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
- */
-#ifndef __ASSEMBLY__
-struct hv_tsb_descr {
-	unsigned short		pgsz_idx;
-	unsigned short		assoc;
-	unsigned int		num_ttes;	/* in TTEs */
-	unsigned int		ctx_idx;
-	unsigned int		pgsz_mask;
-	unsigned long		tsb_base;
-	unsigned long		resv;
-};
-#endif
-#define HV_TSB_DESCR_PGSZ_IDX_OFFSET	0x00
-#define HV_TSB_DESCR_ASSOC_OFFSET	0x02
-#define HV_TSB_DESCR_NUM_TTES_OFFSET	0x04
-#define HV_TSB_DESCR_CTX_IDX_OFFSET	0x08
-#define HV_TSB_DESCR_PGSZ_MASK_OFFSET	0x0c
-#define HV_TSB_DESCR_TSB_BASE_OFFSET	0x10
-#define HV_TSB_DESCR_RESV_OFFSET	0x18
-
-/* Page size bitmask.  */
-#define HV_PGSZ_MASK_8K			(1 << 0)
-#define HV_PGSZ_MASK_64K		(1 << 1)
-#define HV_PGSZ_MASK_512K		(1 << 2)
-#define HV_PGSZ_MASK_4MB		(1 << 3)
-#define HV_PGSZ_MASK_32MB		(1 << 4)
-#define HV_PGSZ_MASK_256MB		(1 << 5)
-#define HV_PGSZ_MASK_2GB		(1 << 6)
-#define HV_PGSZ_MASK_16GB		(1 << 7)
-
-/* Page size index.  The value given in the TSB descriptor must correspond
- * to the smallest page size specified in the pgsz_mask page size bitmask.
- */
-#define HV_PGSZ_IDX_8K			0
-#define HV_PGSZ_IDX_64K			1
-#define HV_PGSZ_IDX_512K		2
-#define HV_PGSZ_IDX_4MB			3
-#define HV_PGSZ_IDX_32MB		4
-#define HV_PGSZ_IDX_256MB		5
-#define HV_PGSZ_IDX_2GB			6
-#define HV_PGSZ_IDX_16GB		7
-
-/* MMU fault status area.
- *
- * MMU related faults have their status and fault address information
- * placed into a memory region made available by privileged code.  Each
- * virtual processor must make a mmu_fault_area_conf() call to tell the
- * hypervisor where that processor's fault status should be stored.
- *
- * The fault status block is a multiple of 64-bytes and must be aligned
- * on a 64-byte boundary.
- */
-#ifndef __ASSEMBLY__
-struct hv_fault_status {
-	unsigned long		i_fault_type;
-	unsigned long		i_fault_addr;
-	unsigned long		i_fault_ctx;
-	unsigned long		i_reserved[5];
-	unsigned long		d_fault_type;
-	unsigned long		d_fault_addr;
-	unsigned long		d_fault_ctx;
-	unsigned long		d_reserved[5];
-};
-#endif
-#define HV_FAULT_I_TYPE_OFFSET	0x00
-#define HV_FAULT_I_ADDR_OFFSET	0x08
-#define HV_FAULT_I_CTX_OFFSET	0x10
-#define HV_FAULT_D_TYPE_OFFSET	0x40
-#define HV_FAULT_D_ADDR_OFFSET	0x48
-#define HV_FAULT_D_CTX_OFFSET	0x50
-
-#define HV_FAULT_TYPE_FAST_MISS	1
-#define HV_FAULT_TYPE_FAST_PROT	2
-#define HV_FAULT_TYPE_MMU_MISS	3
-#define HV_FAULT_TYPE_INV_RA	4
-#define HV_FAULT_TYPE_PRIV_VIOL	5
-#define HV_FAULT_TYPE_PROT_VIOL	6
-#define HV_FAULT_TYPE_NFO	7
-#define HV_FAULT_TYPE_NFO_SEFF	8
-#define HV_FAULT_TYPE_INV_VA	9
-#define HV_FAULT_TYPE_INV_ASI	10
-#define HV_FAULT_TYPE_NC_ATOMIC	11
-#define HV_FAULT_TYPE_PRIV_ACT	12
-#define HV_FAULT_TYPE_RESV1	13
-#define HV_FAULT_TYPE_UNALIGNED	14
-#define HV_FAULT_TYPE_INV_PGSZ	15
-/* Values 16 --> -2 are reserved.  */
-#define HV_FAULT_TYPE_MULTIPLE	-1
-
-/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
- * and mmu_{map,unmap}_perm_addr().
- */
-#define HV_MMU_DMMU			0x01
-#define HV_MMU_IMMU			0x02
-#define HV_MMU_ALL			(HV_MMU_DMMU | HV_MMU_IMMU)
-
-/* mmu_map_addr()
- * TRAP:	HV_MMU_MAP_ADDR_TRAP
- * ARG0:	virtual address
- * ARG1:	mmu context
- * ARG2:	TTE
- * ARG3:	flags (HV_MMU_{IMMU,DMMU})
- * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
- *		EBADPGSZ	Invalid page size value
- *		ENORADDR	Invalid real address in TTE
- *
- * Create a non-permanent mapping using the given TTE, virtual
- * address, and mmu context.  The flags argument determines which
- * (data, or instruction, or both) TLB the mapping gets loaded into.
- *
- * The behavior is undefined if the valid bit is clear in the TTE.
- *
- * Note: This API call is for privileged code to specify temporary translation
- *       mappings without the need to create and manage a TSB.
- */
-
-/* mmu_unmap_addr()
- * TRAP:	HV_MMU_UNMAP_ADDR_TRAP
- * ARG0:	virtual address
- * ARG1:	mmu context
- * ARG2:	flags (HV_MMU_{IMMU,DMMU})
- * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
- *
- * Demaps the given virtual address in the given mmu context on this
- * CPU.  This function is intended to be used to demap pages mapped
- * with mmu_map_addr.  This service is equivalent to invoking
- * mmu_demap_page() with only the current CPU in the CPU list. The
- * flags argument determines which (data, or instruction, or both) TLB
- * the mapping gets unmapped from.
- *
- * Attempting to perform an unmap operation for a previously defined
- * permanent mapping will have undefined results.
- */
-
-/* mmu_tsb_ctx0()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_TSB_CTX0
- * ARG0:	number of TSB descriptions
- * ARG1:	TSB descriptions pointer
- * RET0:	status
- * ERRORS:	ENORADDR		Invalid TSB descriptions pointer or
- *					TSB base within a descriptor
- *		EBADALIGN		TSB descriptions pointer is not aligned
- *					to an 8-byte boundary, or TSB base
- *					within a descriptor is not aligned for
- *					the given TSB size
- *		EBADPGSZ		Invalid page size in a TSB descriptor
- *		EBADTSB			Invalid associativity or size in a TSB
- *					descriptor
- *		EINVAL			Invalid number of TSB descriptions, or
- *					invalid context index in a TSB
- *					descriptor, or index page size not
- *					equal to smallest page size in page
- *					size bitmask field.
- *
- * Configures the TSBs for the current CPU for virtual addresses with
- * context zero.  The TSB descriptions pointer is a pointer to an
- * array of the given number of TSB descriptions.
- *
- * Note: The maximum number of TSBs available to a virtual CPU is given by the
- *       mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
- *       machine description.
- */
-#define HV_FAST_MMU_TSB_CTX0		0x20
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
-					unsigned long tsb_desc_ra);
-#endif
-
-/* mmu_tsb_ctxnon0()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0
- * ARG0:	number of TSB descriptions
- * ARG1:	TSB descriptions pointer
- * RET0:	status
- * ERRORS:	Same as for mmu_tsb_ctx0() above.
- *
- * Configures the TSBs for the current CPU for virtual addresses with
- * non-zero contexts.  The TSB descriptions pointer is a pointer to an
- * array of the given number of TSB descriptions.
- *
- * Note: A maximum of 16 TSBs may be specified in the TSB description list.
- */
-#define HV_FAST_MMU_TSB_CTXNON0		0x21
-
-/* mmu_demap_page()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_DEMAP_PAGE
- * ARG0:	reserved, must be zero
- * ARG1:	reserved, must be zero
- * ARG2:	virtual address
- * ARG3:	mmu context
- * ARG4:	flags (HV_MMU_{IMMU,DMMU})
- * RET0:	status
- * ERRORS:	EINVAL			Invalid virutal address, context, or
- *					flags value
- *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
- *
- * Demaps any page mapping of the given virtual address in the given
- * mmu context for the current virtual CPU.  Any virtually tagged
- * caches are guaranteed to be kept consistent.  The flags argument
- * determines which TLB (instruction, or data, or both) participate in
- * the operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_PAGE		0x22
-
-/* mmu_demap_ctx()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_DEMAP_CTX
- * ARG0:	reserved, must be zero
- * ARG1:	reserved, must be zero
- * ARG2:	mmu context
- * ARG3:	flags (HV_MMU_{IMMU,DMMU})
- * RET0:	status
- * ERRORS:	EINVAL			Invalid context or flags value
- *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
- *
- * Demaps all non-permanent virtual page mappings previously specified
- * for the given context for the current virtual CPU.  Any virtual
- * tagged caches are guaranteed to be kept consistent.  The flags
- * argument determines which TLB (instruction, or data, or both)
- * participate in the operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_CTX		0x23
-
-/* mmu_demap_all()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_DEMAP_ALL
- * ARG0:	reserved, must be zero
- * ARG1:	reserved, must be zero
- * ARG2:	flags (HV_MMU_{IMMU,DMMU})
- * RET0:	status
- * ERRORS:	EINVAL			Invalid flags value
- *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
- *
- * Demaps all non-permanent virtual page mappings previously specified
- * for the current virtual CPU.  Any virtual tagged caches are
- * guaranteed to be kept consistent.  The flags argument determines
- * which TLB (instruction, or data, or both) participate in the
- * operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_ALL		0x24
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mmu_demap_all(void);
-#endif
-
-/* mmu_map_perm_addr()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_MAP_PERM_ADDR
- * ARG0:	virtual address
- * ARG1:	reserved, must be zero
- * ARG2:	TTE
- * ARG3:	flags (HV_MMU_{IMMU,DMMU})
- * RET0:	status
- * ERRORS:	EINVAL			Invalid virutal address or flags value
- *		EBADPGSZ		Invalid page size value
- *		ENORADDR		Invalid real address in TTE
- *		ETOOMANY		Too many mappings (max of 8 reached)
- *
- * Create a permanent mapping using the given TTE and virtual address
- * for context 0 on the calling virtual CPU.  A maximum of 8 such
- * permanent mappings may be specified by privileged code.  Mappings
- * may be removed with mmu_unmap_perm_addr().
- *
- * The behavior is undefined if a TTE with the valid bit clear is given.
- *
- * Note: This call is used to specify address space mappings for which
- *       privileged code does not expect to receive misses.  For example,
- *       this mechanism can be used to map kernel nucleus code and data.
- */
-#define HV_FAST_MMU_MAP_PERM_ADDR	0x25
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
-					     unsigned long set_to_zero,
-					     unsigned long tte,
-					     unsigned long flags);
-#endif
-
-/* mmu_fault_area_conf()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_FAULT_AREA_CONF
- * ARG0:	real address
- * RET0:	status
- * RET1:	previous mmu fault area real address
- * ERRORS:	ENORADDR		Invalid real address
- *		EBADALIGN		Invalid alignment for fault area
- *
- * Configure the MMU fault status area for the calling CPU.  A 64-byte
- * aligned real address specifies where MMU fault status information
- * is placed.  The return value is the previously specified area, or 0
- * for the first invocation.  Specifying a fault area at real address
- * 0 is not allowed.
- */
-#define HV_FAST_MMU_FAULT_AREA_CONF	0x26
-
-/* mmu_enable()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_ENABLE
- * ARG0:	enable flag
- * ARG1:	return target address
- * RET0:	status
- * ERRORS:	ENORADDR		Invalid real address when disabling
- *					translation.
- *		EBADALIGN		The return target address is not
- *					aligned to an instruction.
- *		EINVAL			The enable flag request the current
- *					operating mode (e.g. disable if already
- *					disabled)
- *
- * Enable or disable virtual address translation for the calling CPU
- * within the virtual machine domain.  If the enable flag is zero,
- * translation is disabled, any non-zero value will enable
- * translation.
- *
- * When this function returns, the newly selected translation mode
- * will be active.  If the mmu is being enabled, then the return
- * target address is a virtual address else it is a real address.
- *
- * Upon successful completion, control will be returned to the given
- * return target address (ie. the cpu will jump to that address).  On
- * failure, the previous mmu mode remains and the trap simply returns
- * as normal with the appropriate error code in RET0.
- */
-#define HV_FAST_MMU_ENABLE		0x27
-
-/* mmu_unmap_perm_addr()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_UNMAP_PERM_ADDR
- * ARG0:	virtual address
- * ARG1:	reserved, must be zero
- * ARG2:	flags (HV_MMU_{IMMU,DMMU})
- * RET0:	status
- * ERRORS:	EINVAL			Invalid virutal address or flags value
- *		ENOMAP			Specified mapping was not found
- *
- * Demaps any permanent page mapping (established via
- * mmu_map_perm_addr()) at the given virtual address for context 0 on
- * the current virtual CPU.  Any virtual tagged caches are guaranteed
- * to be kept consistent.
- */
-#define HV_FAST_MMU_UNMAP_PERM_ADDR	0x28
-
-/* mmu_tsb_ctx0_info()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_TSB_CTX0_INFO
- * ARG0:	max TSBs
- * ARG1:	buffer pointer
- * RET0:	status
- * RET1:	number of TSBs
- * ERRORS:	EINVAL			Supplied buffer is too small
- *		EBADALIGN		The buffer pointer is badly aligned
- *		ENORADDR		Invalid real address for buffer pointer
- *
- * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
- * into the provided buffer.  The size of the buffer is given in ARG1
- * in terms of the number of TSB description entries.
- *
- * Upon return, RET1 always contains the number of TSB descriptions
- * previously configured.  If zero TSBs were configured, EOK is
- * returned with RET1 containing 0.
- */
-#define HV_FAST_MMU_TSB_CTX0_INFO	0x29
-
-/* mmu_tsb_ctxnon0_info()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0_INFO
- * ARG0:	max TSBs
- * ARG1:	buffer pointer
- * RET0:	status
- * RET1:	number of TSBs
- * ERRORS:	EINVAL			Supplied buffer is too small
- *		EBADALIGN		The buffer pointer is badly aligned
- *		ENORADDR		Invalid real address for buffer pointer
- *
- * Return the TSB configuration as previous defined by
- * mmu_tsb_ctxnon0() into the provided buffer.  The size of the buffer
- * is given in ARG1 in terms of the number of TSB description entries.
- *
- * Upon return, RET1 always contains the number of TSB descriptions
- * previously configured.  If zero TSBs were configured, EOK is
- * returned with RET1 containing 0.
- */
-#define HV_FAST_MMU_TSB_CTXNON0_INFO	0x2a
-
-/* mmu_fault_area_info()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMU_FAULT_AREA_INFO
- * RET0:	status
- * RET1:	fault area real address
- * ERRORS:	No errors defined.
- *
- * Return the currently defined MMU fault status area for the current
- * CPU.  The real address of the fault status area is returned in
- * RET1, or 0 is returned in RET1 if no fault status area is defined.
- *
- * Note: mmu_fault_area_conf() may be called with the return value (RET1)
- *       from this service if there is a need to save and restore the fault
- *	 area for a cpu.
- */
-#define HV_FAST_MMU_FAULT_AREA_INFO	0x2b
-
-/* Cache and Memory services. */
-
-/* mem_scrub()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MEM_SCRUB
- * ARG0:	real address
- * ARG1:	length
- * RET0:	status
- * RET1:	length scrubbed
- * ERRORS:	ENORADDR	Invalid real address
- *		EBADALIGN	Start address or length are not correctly
- *				aligned
- *		EINVAL		Length is zero
- *
- * Zero the memory contents in the range real address to real address
- * plus length minus 1.  Also, valid ECC will be generated for that
- * memory address range.  Scrubbing is started at the given real
- * address, but may not scrub the entire given length.  The actual
- * length scrubbed will be returned in RET1.
- *
- * The real address and length must be aligned on an 8K boundary, or
- * contain the start address and length from a sun4v error report.
- *
- * Note: There are two uses for this function.  The first use is to block clear
- *       and initialize memory and the second is to scrub an u ncorrectable
- *       error reported via a resumable or non-resumable trap.  The second
- *       use requires the arguments to be equal to the real address and length
- *       provided in a sun4v memory error report.
- */
-#define HV_FAST_MEM_SCRUB		0x31
-
-/* mem_sync()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MEM_SYNC
- * ARG0:	real address
- * ARG1:	length
- * RET0:	status
- * RET1:	length synced
- * ERRORS:	ENORADDR	Invalid real address
- *		EBADALIGN	Start address or length are not correctly
- *				aligned
- *		EINVAL		Length is zero
- *
- * Force the next access within the real address to real address plus
- * length minus 1 to be fetches from main system memory.  Less than
- * the given length may be synced, the actual amount synced is
- * returned in RET1.  The real address and length must be aligned on
- * an 8K boundary.
- */
-#define HV_FAST_MEM_SYNC		0x32
-
-/* Time of day services.
- *
- * The hypervisor maintains the time of day on a per-domain basis.
- * Changing the time of day in one domain does not affect the time of
- * day on any other domain.
- *
- * Time is described by a single unsigned 64-bit word which is the
- * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
- * 1970).
- */
-
-/* tod_get()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_TOD_GET
- * RET0:	status
- * RET1:	TOD
- * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
- *		ENOTSUPPORTED	If TOD not supported on this platform
- *
- * Return the current time of day.  May block if TOD access is
- * temporarily not possible.
- */
-#define HV_FAST_TOD_GET			0x50
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_tod_get(unsigned long *time);
-#endif
-
-/* tod_set()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_TOD_SET
- * ARG0:	TOD
- * RET0:	status
- * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
- *		ENOTSUPPORTED	If TOD not supported on this platform
- *
- * The current time of day is set to the value specified in ARG0.  May
- * block if TOD access is temporarily not possible.
- */
-#define HV_FAST_TOD_SET			0x51
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_tod_set(unsigned long time);
-#endif
-
-/* Console services */
-
-/* con_getchar()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CONS_GETCHAR
- * RET0:	status
- * RET1:	character
- * ERRORS:	EWOULDBLOCK	No character available.
- *
- * Returns a character from the console device.  If no character is
- * available then an EWOULDBLOCK error is returned.  If a character is
- * available, then the returned status is EOK and the character value
- * is in RET1.
- *
- * A virtual BREAK is represented by the 64-bit value -1.
- *
- * A virtual HUP signal is represented by the 64-bit value -2.
- */
-#define HV_FAST_CONS_GETCHAR		0x60
-
-/* con_putchar()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CONS_PUTCHAR
- * ARG0:	character
- * RET0:	status
- * ERRORS:	EINVAL		Illegal character
- *		EWOULDBLOCK	Output buffer currently full, would block
- *
- * Send a character to the console device.  Only character values
- * between 0 and 255 may be used.  Values outside this range are
- * invalid except for the 64-bit value -1 which is used to send a
- * virtual BREAK.
- */
-#define HV_FAST_CONS_PUTCHAR		0x61
-
-/* con_read()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CONS_READ
- * ARG0:	buffer real address
- * ARG1:	buffer size in bytes
- * RET0:	status
- * RET1:	bytes read or BREAK or HUP
- * ERRORS:	EWOULDBLOCK	No character available.
- *
- * Reads characters into a buffer from the console device.  If no
- * character is available then an EWOULDBLOCK error is returned.
- * If a character is available, then the returned status is EOK
- * and the number of bytes read into the given buffer is provided
- * in RET1.
- *
- * A virtual BREAK is represented by the 64-bit RET1 value -1.
- *
- * A virtual HUP signal is represented by the 64-bit RET1 value -2.
- *
- * If BREAK or HUP are indicated, no bytes were read into buffer.
- */
-#define HV_FAST_CONS_READ		0x62
-
-/* con_write()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_CONS_WRITE
- * ARG0:	buffer real address
- * ARG1:	buffer size in bytes
- * RET0:	status
- * RET1:	bytes written
- * ERRORS:	EWOULDBLOCK	Output buffer currently full, would block
- *
- * Send a characters in buffer to the console device.  Breaks must be
- * sent using con_putchar().
- */
-#define HV_FAST_CONS_WRITE		0x63
-
-#ifndef __ASSEMBLY__
-extern long sun4v_con_getchar(long *status);
-extern long sun4v_con_putchar(long c);
-extern long sun4v_con_read(unsigned long buffer,
-			   unsigned long size,
-			   unsigned long *bytes_read);
-extern unsigned long sun4v_con_write(unsigned long buffer,
-				     unsigned long size,
-				     unsigned long *bytes_written);
-#endif
-
-/* mach_set_soft_state()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MACH_SET_SOFT_STATE
- * ARG0:	software state
- * ARG1:	software state description pointer
- * RET0:	status
- * ERRORS:	EINVAL		software state not valid or software state
- *				description is not NULL terminated
- *		ENORADDR	software state description pointer is not a
- *				valid real address
- *		EBADALIGNED	software state description is not correctly
- *				aligned
- *
- * This allows the guest to report it's soft state to the hypervisor.  There
- * are two primary components to this state.  The first part states whether
- * the guest software is running or not.  The second containts optional
- * details specific to the software.
- *
- * The software state argument is defined below in HV_SOFT_STATE_*, and
- * indicates whether the guest is operating normally or in a transitional
- * state.
- *
- * The software state description argument is a real address of a data buffer
- * of size 32-bytes aligned on a 32-byte boundary.  It is treated as a NULL
- * terminated 7-bit ASCII string of up to 31 characters not including the
- * NULL termination.
- */
-#define HV_FAST_MACH_SET_SOFT_STATE	0x70
-#define  HV_SOFT_STATE_NORMAL		 0x01
-#define  HV_SOFT_STATE_TRANSITION	 0x02
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
-					       unsigned long msg_string_ra);
-#endif
-
-/* mach_get_soft_state()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MACH_GET_SOFT_STATE
- * ARG0:	software state description pointer
- * RET0:	status
- * RET1:	software state
- * ERRORS:	ENORADDR	software state description pointer is not a
- *				valid real address
- *		EBADALIGNED	software state description is not correctly
- *				aligned
- *
- * Retrieve the current value of the guest's software state.  The rules
- * for the software state pointer are the same as for mach_set_soft_state()
- * above.
- */
-#define HV_FAST_MACH_GET_SOFT_STATE	0x71
-
-/* svc_send()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_SVC_SEND
- * ARG0:	service ID
- * ARG1:	buffer real address
- * ARG2:	buffer size
- * RET0:	STATUS
- * RET1:	sent_bytes
- *
- * Be careful, all output registers are clobbered by this operation,
- * so for example it is not possible to save away a value in %o4
- * across the trap.
- */
-#define HV_FAST_SVC_SEND		0x80
-
-/* svc_recv()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_SVC_RECV
- * ARG0:	service ID
- * ARG1:	buffer real address
- * ARG2:	buffer size
- * RET0:	STATUS
- * RET1:	recv_bytes
- *
- * Be careful, all output registers are clobbered by this operation,
- * so for example it is not possible to save away a value in %o4
- * across the trap.
- */
-#define HV_FAST_SVC_RECV		0x81
-
-/* svc_getstatus()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_SVC_GETSTATUS
- * ARG0:	service ID
- * RET0:	STATUS
- * RET1:	status bits
- */
-#define HV_FAST_SVC_GETSTATUS		0x82
-
-/* svc_setstatus()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_SVC_SETSTATUS
- * ARG0:	service ID
- * ARG1:	bits to set
- * RET0:	STATUS
- */
-#define HV_FAST_SVC_SETSTATUS		0x83
-
-/* svc_clrstatus()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_SVC_CLRSTATUS
- * ARG0:	service ID
- * ARG1:	bits to clear
- * RET0:	STATUS
- */
-#define HV_FAST_SVC_CLRSTATUS		0x84
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_svc_send(unsigned long svc_id,
-				    unsigned long buffer,
-				    unsigned long buffer_size,
-				    unsigned long *sent_bytes);
-extern unsigned long sun4v_svc_recv(unsigned long svc_id,
-				    unsigned long buffer,
-				    unsigned long buffer_size,
-				    unsigned long *recv_bytes);
-extern unsigned long sun4v_svc_getstatus(unsigned long svc_id,
-					 unsigned long *status_bits);
-extern unsigned long sun4v_svc_setstatus(unsigned long svc_id,
-					 unsigned long status_bits);
-extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id,
-					 unsigned long status_bits);
-#endif
-
-/* Trap trace services.
- *
- * The hypervisor provides a trap tracing capability for privileged
- * code running on each virtual CPU.  Privileged code provides a
- * round-robin trap trace queue within which the hypervisor writes
- * 64-byte entries detailing hyperprivileged traps taken n behalf of
- * privileged code.  This is provided as a debugging capability for
- * privileged code.
- *
- * The trap trace control structure is 64-bytes long and placed at the
- * start (offset 0) of the trap trace buffer, and is described as
- * follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_trap_trace_control {
-	unsigned long		head_offset;
-	unsigned long		tail_offset;
-	unsigned long		__reserved[0x30 / sizeof(unsigned long)];
-};
-#endif
-#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET	0x00
-#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET	0x08
-
-/* The head offset is the offset of the most recently completed entry
- * in the trap-trace buffer.  The tail offset is the offset of the
- * next entry to be written.  The control structure is owned and
- * modified by the hypervisor.  A guest may not modify the control
- * structure contents.  Attempts to do so will result in undefined
- * behavior for the guest.
- *
- * Each trap trace buffer entry is layed out as follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_trap_trace_entry {
-	unsigned char	type;		/* Hypervisor or guest entry?	*/
-	unsigned char	hpstate;	/* Hyper-privileged state	*/
-	unsigned char	tl;		/* Trap level			*/
-	unsigned char	gl;		/* Global register level	*/
-	unsigned short	tt;		/* Trap type			*/
-	unsigned short	tag;		/* Extended trap identifier	*/
-	unsigned long	tstate;		/* Trap state			*/
-	unsigned long	tick;		/* Tick				*/
-	unsigned long	tpc;		/* Trap PC			*/
-	unsigned long	f1;		/* Entry specific		*/
-	unsigned long	f2;		/* Entry specific		*/
-	unsigned long	f3;		/* Entry specific		*/
-	unsigned long	f4;		/* Entry specific		*/
-};
-#endif
-#define HV_TRAP_TRACE_ENTRY_TYPE	0x00
-#define HV_TRAP_TRACE_ENTRY_HPSTATE	0x01
-#define HV_TRAP_TRACE_ENTRY_TL		0x02
-#define HV_TRAP_TRACE_ENTRY_GL		0x03
-#define HV_TRAP_TRACE_ENTRY_TT		0x04
-#define HV_TRAP_TRACE_ENTRY_TAG		0x06
-#define HV_TRAP_TRACE_ENTRY_TSTATE	0x08
-#define HV_TRAP_TRACE_ENTRY_TICK	0x10
-#define HV_TRAP_TRACE_ENTRY_TPC		0x18
-#define HV_TRAP_TRACE_ENTRY_F1		0x20
-#define HV_TRAP_TRACE_ENTRY_F2		0x28
-#define HV_TRAP_TRACE_ENTRY_F3		0x30
-#define HV_TRAP_TRACE_ENTRY_F4		0x38
-
-/* The type field is encoded as follows.  */
-#define HV_TRAP_TYPE_UNDEF		0x00 /* Entry content undefined     */
-#define HV_TRAP_TYPE_HV			0x01 /* Hypervisor trap entry       */
-#define HV_TRAP_TYPE_GUEST		0xff /* Added via ttrace_addentry() */
-
-/* ttrace_buf_conf()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_TTRACE_BUF_CONF
- * ARG0:	real address
- * ARG1:	number of entries
- * RET0:	status
- * RET1:	number of entries
- * ERRORS:	ENORADDR	Invalid real address
- *		EINVAL		Size is too small
- *		EBADALIGN	Real address not aligned on 64-byte boundary
- *
- * Requests hypervisor trap tracing and declares a virtual CPU's trap
- * trace buffer to the hypervisor.  The real address supplies the real
- * base address of the trap trace queue and must be 64-byte aligned.
- * Specifying a value of 0 for the number of entries disables trap
- * tracing for the calling virtual CPU.  The buffer allocated must be
- * sized for a power of two number of 64-byte trap trace entries plus
- * an initial 64-byte control structure.
- * 
- * This may be invoked any number of times so that a virtual CPU may
- * relocate a trap trace buffer or create "snapshots" of information.
- *
- * If the real address is illegal or badly aligned, then trap tracing
- * is disabled and an error is returned.
- *
- * Upon failure with EINVAL, this service call returns in RET1 the
- * minimum number of buffer entries required.  Upon other failures
- * RET1 is undefined.
- */
-#define HV_FAST_TTRACE_BUF_CONF		0x90
-
-/* ttrace_buf_info()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_TTRACE_BUF_INFO
- * RET0:	status
- * RET1:	real address
- * RET2:	size
- * ERRORS:	None defined.
- *
- * Returns the size and location of the previously declared trap-trace
- * buffer.  In the event that no buffer was previously defined, or the
- * buffer is disabled, this call will return a size of zero bytes.
- */
-#define HV_FAST_TTRACE_BUF_INFO		0x91
-
-/* ttrace_enable()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_TTRACE_ENABLE
- * ARG0:	enable
- * RET0:	status
- * RET1:	previous enable state
- * ERRORS:	EINVAL		No trap trace buffer currently defined
- *
- * Enable or disable trap tracing, and return the previous enabled
- * state in RET1.  Future systems may define various flags for the
- * enable argument (ARG0), for the moment a guest should pass
- * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
- * tracing - which will ensure future compatability.
- */
-#define HV_FAST_TTRACE_ENABLE		0x92
-
-/* ttrace_freeze()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_TTRACE_FREEZE
- * ARG0:	freeze
- * RET0:	status
- * RET1:	previous freeze state
- * ERRORS:	EINVAL		No trap trace buffer currently defined
- *
- * Freeze or unfreeze trap tracing, returning the previous freeze
- * state in RET1.  A guest should pass a non-zero value to freeze and
- * a zero value to unfreeze all tracing.  The returned previous state
- * is 0 for not frozen and 1 for frozen.
- */
-#define HV_FAST_TTRACE_FREEZE		0x93
-
-/* ttrace_addentry()
- * TRAP:	HV_TTRACE_ADDENTRY_TRAP
- * ARG0:	tag (16-bits)
- * ARG1:	data word 0
- * ARG2:	data word 1
- * ARG3:	data word 2
- * ARG4:	data word 3
- * RET0:	status
- * ERRORS:	EINVAL		No trap trace buffer currently defined
- *
- * Add an entry to the trap trace buffer.  Upon return only ARG0/RET0
- * is modified - none of the other registers holding arguments are
- * volatile across this hypervisor service.
- */
-
-/* Core dump services.
- *
- * Since the hypervisor viraulizes and thus obscures a lot of the
- * physical machine layout and state, traditional OS crash dumps can
- * be difficult to diagnose especially when the problem is a
- * configuration error of some sort.
- *
- * The dump services provide an opaque buffer into which the
- * hypervisor can place it's internal state in order to assist in
- * debugging such situations.  The contents are opaque and extremely
- * platform and hypervisor implementation specific.  The guest, during
- * a core dump, requests that the hypervisor update any information in
- * the dump buffer in preparation to being dumped as part of the
- * domain's memory image.
- */
-
-/* dump_buf_update()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_DUMP_BUF_UPDATE
- * ARG0:	real address
- * ARG1:	size
- * RET0:	status
- * RET1:	required size of dump buffer
- * ERRORS:	ENORADDR	Invalid real address
- *		EBADALIGN	Real address is not aligned on a 64-byte
- *				boundary
- *		EINVAL		Size is non-zero but less than minimum size
- *				required
- *		ENOTSUPPORTED	Operation not supported on current logical
- *				domain
- *
- * Declare a domain dump buffer to the hypervisor.  The real address
- * provided for the domain dump buffer must be 64-byte aligned.  The
- * size specifies the size of the dump buffer and may be larger than
- * the minimum size specified in the machine description.  The
- * hypervisor will fill the dump buffer with opaque data.
- *
- * Note: A guest may elect to include dump buffer contents as part of a crash
- *       dump to assist with debugging.  This function may be called any number
- *       of times so that a guest may relocate a dump buffer, or create
- *       "snapshots" of any dump-buffer information.  Each call to
- *       dump_buf_update() atomically declares the new dump buffer to the
- *       hypervisor.
- *
- * A specified size of 0 unconfigures the dump buffer.  If the real
- * address is illegal or badly aligned, then any currently active dump
- * buffer is disabled and an error is returned.
- *
- * In the event that the call fails with EINVAL, RET1 contains the
- * minimum size requires by the hypervisor for a valid dump buffer.
- */
-#define HV_FAST_DUMP_BUF_UPDATE		0x94
-
-/* dump_buf_info()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_DUMP_BUF_INFO
- * RET0:	status
- * RET1:	real address of current dump buffer
- * RET2:	size of current dump buffer
- * ERRORS:	No errors defined.
- *
- * Return the currently configures dump buffer description.  A
- * returned size of 0 bytes indicates an undefined dump buffer.  In
- * this case the return address in RET1 is undefined.
- */
-#define HV_FAST_DUMP_BUF_INFO		0x95
-
-/* Device interrupt services.
- *
- * Device interrupts are allocated to system bus bridges by the hypervisor,
- * and described to OBP in the machine description.  OBP then describes
- * these interrupts to the OS via properties in the device tree.
- *
- * Terminology:
- *
- *	cpuid		Unique opaque value which represents a target cpu.
- *
- *	devhandle	Device handle.  It uniquely identifies a device, and
- *			consistes of the lower 28-bits of the hi-cell of the
- *			first entry of the device's "reg" property in the
- *			OBP device tree.
- *
- *	devino		Device interrupt number.  Specifies the relative
- *			interrupt number within the device.  The unique
- *			combination of devhandle and devino are used to
- *			identify a specific device interrupt.
- *
- *			Note: The devino value is the same as the values in the
- *			      "interrupts" property or "interrupt-map" property
- *			      in the OBP device tree for that device.
- *
- *	sysino		System interrupt number.  A 64-bit unsigned interger
- *			representing a unique interrupt within a virtual
- *			machine.
- *
- *	intr_state	A flag representing the interrupt state for a given
- *			sysino.  The state values are defined below.
- *
- *	intr_enabled	A flag representing the 'enabled' state for a given
- *			sysino.  The enable values are defined below.
- */
-
-#define HV_INTR_STATE_IDLE		0 /* Nothing pending */
-#define HV_INTR_STATE_RECEIVED		1 /* Interrupt received by hardware */
-#define HV_INTR_STATE_DELIVERED		2 /* Interrupt delivered to queue */
-
-#define HV_INTR_DISABLED		0 /* sysino not enabled */
-#define HV_INTR_ENABLED			1 /* sysino enabled */
-
-/* intr_devino_to_sysino()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_INTR_DEVINO2SYSINO
- * ARG0:	devhandle
- * ARG1:	devino
- * RET0:	status
- * RET1:	sysino
- * ERRORS:	EINVAL		Invalid devhandle/devino
- *
- * Converts a device specific interrupt number of the given
- * devhandle/devino into a system specific ino (sysino).
- */
-#define HV_FAST_INTR_DEVINO2SYSINO	0xa0
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
-					    unsigned long devino);
-#endif
-
-/* intr_getenabled()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_INTR_GETENABLED
- * ARG0:	sysino
- * RET0:	status
- * RET1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
- * ERRORS:	EINVAL		Invalid sysino
- *
- * Returns interrupt enabled state in RET1 for the interrupt defined
- * by the given sysino.
- */
-#define HV_FAST_INTR_GETENABLED		0xa1
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
-#endif
-
-/* intr_setenabled()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_INTR_SETENABLED
- * ARG0:	sysino
- * ARG1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
- * RET0:	status
- * ERRORS:	EINVAL		Invalid sysino or intr_enabled value
- *
- * Set the 'enabled' state of the interrupt sysino.
- */
-#define HV_FAST_INTR_SETENABLED		0xa2
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
-#endif
-
-/* intr_getstate()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_INTR_GETSTATE
- * ARG0:	sysino
- * RET0:	status
- * RET1:	intr_state (HV_INTR_STATE_*)
- * ERRORS:	EINVAL		Invalid sysino
- *
- * Returns current state of the interrupt defined by the given sysino.
- */
-#define HV_FAST_INTR_GETSTATE		0xa3
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_getstate(unsigned long sysino);
-#endif
-
-/* intr_setstate()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_INTR_SETSTATE
- * ARG0:	sysino
- * ARG1:	intr_state (HV_INTR_STATE_*)
- * RET0:	status
- * ERRORS:	EINVAL		Invalid sysino or intr_state value
- *
- * Sets the current state of the interrupt described by the given sysino
- * value.
- *
- * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
- *       interrupt for sysino.
- */
-#define HV_FAST_INTR_SETSTATE		0xa4
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
-#endif
-
-/* intr_gettarget()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_INTR_GETTARGET
- * ARG0:	sysino
- * RET0:	status
- * RET1:	cpuid
- * ERRORS:	EINVAL		Invalid sysino
- *
- * Returns CPU that is the current target of the interrupt defined by
- * the given sysino.  The CPU value returned is undefined if the target
- * has not been set via intr_settarget().
- */
-#define HV_FAST_INTR_GETTARGET		0xa5
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
-#endif
-
-/* intr_settarget()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_INTR_SETTARGET
- * ARG0:	sysino
- * ARG1:	cpuid
- * RET0:	status
- * ERRORS:	EINVAL		Invalid sysino
- *		ENOCPU		Invalid cpuid
- *
- * Set the target CPU for the interrupt defined by the given sysino.
- */
-#define HV_FAST_INTR_SETTARGET		0xa6
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
-#endif
-
-/* vintr_get_cookie()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_GET_COOKIE
- * ARG0:	device handle
- * ARG1:	device ino
- * RET0:	status
- * RET1:	cookie
- */
-#define HV_FAST_VINTR_GET_COOKIE	0xa7
-
-/* vintr_set_cookie()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_SET_COOKIE
- * ARG0:	device handle
- * ARG1:	device ino
- * ARG2:	cookie
- * RET0:	status
- */
-#define HV_FAST_VINTR_SET_COOKIE	0xa8
-
-/* vintr_get_valid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_GET_VALID
- * ARG0:	device handle
- * ARG1:	device ino
- * RET0:	status
- * RET1:	valid state
- */
-#define HV_FAST_VINTR_GET_VALID		0xa9
-
-/* vintr_set_valid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_SET_VALID
- * ARG0:	device handle
- * ARG1:	device ino
- * ARG2:	valid state
- * RET0:	status
- */
-#define HV_FAST_VINTR_SET_VALID		0xaa
-
-/* vintr_get_state()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_GET_STATE
- * ARG0:	device handle
- * ARG1:	device ino
- * RET0:	status
- * RET1:	state
- */
-#define HV_FAST_VINTR_GET_STATE		0xab
-
-/* vintr_set_state()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_SET_STATE
- * ARG0:	device handle
- * ARG1:	device ino
- * ARG2:	state
- * RET0:	status
- */
-#define HV_FAST_VINTR_SET_STATE		0xac
-
-/* vintr_get_target()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_GET_TARGET
- * ARG0:	device handle
- * ARG1:	device ino
- * RET0:	status
- * RET1:	cpuid
- */
-#define HV_FAST_VINTR_GET_TARGET	0xad
-
-/* vintr_set_target()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_VINTR_SET_TARGET
- * ARG0:	device handle
- * ARG1:	device ino
- * ARG2:	cpuid
- * RET0:	status
- */
-#define HV_FAST_VINTR_SET_TARGET	0xae
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
-					    unsigned long dev_ino,
-					    unsigned long *cookie);
-extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
-					    unsigned long dev_ino,
-					    unsigned long cookie);
-extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
-					   unsigned long dev_ino,
-					   unsigned long *valid);
-extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
-					   unsigned long dev_ino,
-					   unsigned long valid);
-extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
-					   unsigned long dev_ino,
-					   unsigned long *state);
-extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
-					   unsigned long dev_ino,
-					   unsigned long state);
-extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
-					    unsigned long dev_ino,
-					    unsigned long *cpuid);
-extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
-					    unsigned long dev_ino,
-					    unsigned long cpuid);
-#endif
-
-/* PCI IO services.
- *
- * See the terminology descriptions in the device interrupt services
- * section above as those apply here too.  Here are terminology
- * definitions specific to these PCI IO services:
- *
- *	tsbnum		TSB number.  Indentifies which io-tsb is used.
- *			For this version of the specification, tsbnum
- *			must be zero.
- *
- *	tsbindex	TSB index.  Identifies which entry in the TSB
- *			is used.  The first entry is zero.
- *
- *	tsbid		A 64-bit aligned data structure which contains
- *			a tsbnum and a tsbindex.  Bits 63:32 contain the
- *			tsbnum and bits 31:00 contain the tsbindex.
- *
- *			Use the HV_PCI_TSBID() macro to construct such
- * 			values.
- *
- *	io_attributes	IO attributes for IOMMU mappings.  One of more
- *			of the attritbute bits are stores in a 64-bit
- *			value.  The values are defined below.
- *
- *	r_addr		64-bit real address
- *
- *	pci_device	PCI device address.  A PCI device address identifies
- *			a specific device on a specific PCI bus segment.
- *			A PCI device address ia a 32-bit unsigned integer
- *			with the following format:
- *
- *				00000000.bbbbbbbb.dddddfff.00000000
- *
- *			Use the HV_PCI_DEVICE_BUILD() macro to construct
- *			such values.
- *
- *	pci_config_offset
- *			PCI configureation space offset.  For conventional
- *			PCI a value between 0 and 255.  For extended
- *			configuration space, a value between 0 and 4095.
- *
- *			Note: For PCI configuration space accesses, the offset
- *			      must be aligned to the access size.
- *
- *	error_flag	A return value which specifies if the action succeeded
- *			or failed.  0 means no error, non-0 means some error
- *			occurred while performing the service.
- *
- *	io_sync_direction
- *			Direction definition for pci_dma_sync(), defined
- *			below in HV_PCI_SYNC_*.
- *
- *	io_page_list	A list of io_page_addresses, an io_page_address is
- *			a real address.
- *
- *	io_page_list_p	A pointer to an io_page_list.
- *
- *	"size based byte swap" - Some functions do size based byte swapping
- *				 which allows sw to access pointers and
- *				 counters in native form when the processor
- *				 operates in a different endianness than the
- *				 IO bus.  Size-based byte swapping converts a
- *				 multi-byte field between big-endian and
- *				 little-endian format.
- */
-
-#define HV_PCI_MAP_ATTR_READ		0x01
-#define HV_PCI_MAP_ATTR_WRITE		0x02
-
-#define HV_PCI_DEVICE_BUILD(b,d,f)	\
-	((((b) & 0xff) << 16) | \
-	 (((d) & 0x1f) << 11) | \
-	 (((f) & 0x07) <<  8))
-
-#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
-	((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
-
-#define HV_PCI_SYNC_FOR_DEVICE		0x01
-#define HV_PCI_SYNC_FOR_CPU		0x02
-
-/* pci_iommu_map()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_IOMMU_MAP
- * ARG0:	devhandle
- * ARG1:	tsbid
- * ARG2:	#ttes
- * ARG3:	io_attributes
- * ARG4:	io_page_list_p
- * RET0:	status
- * RET1:	#ttes mapped
- * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex/io_attributes
- *		EBADALIGN	Improperly aligned real address
- *		ENORADDR	Invalid real address
- *
- * Create IOMMU mappings in the sun4v device defined by the given
- * devhandle.  The mappings are created in the TSB defined by the
- * tsbnum component of the given tsbid.  The first mapping is created
- * in the TSB i ndex defined by the tsbindex component of the given tsbid.
- * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
- * the second at tsbnum, tsbindex + 1, etc.
- *
- * All mappings are created with the attributes defined by the io_attributes
- * argument.  The page mapping addresses are described in the io_page_list
- * defined by the given io_page_list_p, which is a pointer to the io_page_list.
- * The first entry in the io_page_list is the address for the first iotte, the
- * 2nd for the 2nd iotte, and so on.
- *
- * Each io_page_address in the io_page_list must be appropriately aligned.
- * #ttes must be greater than zero.  For this version of the spec, the tsbnum
- * component of the given tsbid must be zero.
- *
- * Returns the actual number of mappings creates, which may be less than
- * or equal to the argument #ttes.  If the function returns a value which
- * is less than the #ttes, the caller may continus to call the function with
- * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
- * mapped.
- *
- * Note: This function does not imply an iotte cache flush.  The guest must
- *       demap an entry before re-mapping it.
- */
-#define HV_FAST_PCI_IOMMU_MAP		0xb0
-
-/* pci_iommu_demap()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_IOMMU_DEMAP
- * ARG0:	devhandle
- * ARG1:	tsbid
- * ARG2:	#ttes
- * RET0:	status
- * RET1:	#ttes demapped
- * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
- *
- * Demap and flush IOMMU mappings in the device defined by the given
- * devhandle.  Demaps up to #ttes entries in the TSB defined by the tsbnum
- * component of the given tsbid, starting at the TSB index defined by the
- * tsbindex component of the given tsbid.
- *
- * For this version of the spec, the tsbnum of the given tsbid must be zero.
- * #ttes must be greater than zero.
- *
- * Returns the actual number of ttes demapped, which may be less than or equal
- * to the argument #ttes.  If #ttes demapped is less than #ttes, the caller
- * may continue to call this function with updated tsbid and #ttes arguments
- * until all pages are demapped.
- *
- * Note: Entries do not have to be mapped to be demapped.  A demap of an
- *       unmapped page will flush the entry from the tte cache.
- */
-#define HV_FAST_PCI_IOMMU_DEMAP		0xb1
-
-/* pci_iommu_getmap()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_IOMMU_GETMAP
- * ARG0:	devhandle
- * ARG1:	tsbid
- * RET0:	status
- * RET1:	io_attributes
- * RET2:	real address
- * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
- *		ENOMAP		Mapping is not valid, no translation exists
- *
- * Read and return the mapping in the device described by the given devhandle
- * and tsbid.  If successful, the io_attributes shall be returned in RET1
- * and the page address of the mapping shall be returned in RET2.
- *
- * For this version of the spec, the tsbnum component of the given tsbid
- * must be zero.
- */
-#define HV_FAST_PCI_IOMMU_GETMAP	0xb2
-
-/* pci_iommu_getbypass()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_IOMMU_GETBYPASS
- * ARG0:	devhandle
- * ARG1:	real address
- * ARG2:	io_attributes
- * RET0:	status
- * RET1:	io_addr
- * ERRORS:	EINVAL		Invalid devhandle/io_attributes
- *		ENORADDR	Invalid real address
- *		ENOTSUPPORTED	Function not supported in this implementation.
- *
- * Create a "special" mapping in the device described by the given devhandle,
- * for the given real address and attributes.  Return the IO address in RET1
- * if successful.
- */
-#define HV_FAST_PCI_IOMMU_GETBYPASS	0xb3
-
-/* pci_config_get()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_CONFIG_GET
- * ARG0:	devhandle
- * ARG1:	pci_device
- * ARG2:	pci_config_offset
- * ARG3:	size
- * RET0:	status
- * RET1:	error_flag
- * RET2:	data
- * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
- *		EBADALIGN	pci_config_offset not size aligned
- *		ENOACCESS	Access to this offset is not permitted
- *
- * Read PCI configuration space for the adapter described by the given
- * devhandle.  Read size (1, 2, or 4) bytes of data from the given
- * pci_device, at pci_config_offset from the beginning of the device's
- * configuration space.  If there was no error, RET1 is set to zero and
- * RET2 is set to the data read.  Insignificant bits in RET2 are not
- * guarenteed to have any specific value and therefore must be ignored.
- *
- * The data returned in RET2 is size based byte swapped.
- *
- * If an error occurs during the read, set RET1 to a non-zero value.  The
- * given pci_config_offset must be 'size' aligned.
- */
-#define HV_FAST_PCI_CONFIG_GET		0xb4
-
-/* pci_config_put()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_CONFIG_PUT
- * ARG0:	devhandle
- * ARG1:	pci_device
- * ARG2:	pci_config_offset
- * ARG3:	size
- * ARG4:	data
- * RET0:	status
- * RET1:	error_flag
- * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
- *		EBADALIGN	pci_config_offset not size aligned
- *		ENOACCESS	Access to this offset is not permitted
- *
- * Write PCI configuration space for the adapter described by the given
- * devhandle.  Write size (1, 2, or 4) bytes of data in a single operation,
- * at pci_config_offset from the beginning of the device's configuration
- * space.  The data argument contains the data to be written to configuration
- * space.  Prior to writing, the data is size based byte swapped.
- *
- * If an error occurs during the write access, do not generate an error
- * report, do set RET1 to a non-zero value.  Otherwise RET1 is zero.
- * The given pci_config_offset must be 'size' aligned.
- *
- * This function is permitted to read from offset zero in the configuration
- * space described by the given pci_device if necessary to ensure that the
- * write access to config space completes.
- */
-#define HV_FAST_PCI_CONFIG_PUT		0xb5
-
-/* pci_peek()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_PEEK
- * ARG0:	devhandle
- * ARG1:	real address
- * ARG2:	size
- * RET0:	status
- * RET1:	error_flag
- * RET2:	data
- * ERRORS:	EINVAL		Invalid devhandle or size
- *		EBADALIGN	Improperly aligned real address
- *		ENORADDR	Bad real address
- *		ENOACCESS	Guest access prohibited
- *
- * Attempt to read the IO address given by the given devhandle, real address,
- * and size.  Size must be 1, 2, 4, or 8.  The read is performed as a single
- * access operation using the given size.  If an error occurs when reading
- * from the given location, do not generate an error report, but return a
- * non-zero value in RET1.  If the read was successful, return zero in RET1
- * and return the actual data read in RET2.  The data returned is size based
- * byte swapped.
- *
- * Non-significant bits in RET2 are not guarenteed to have any specific value
- * and therefore must be ignored.  If RET1 is returned as non-zero, the data 
- * value is not guarenteed to have any specific value and should be ignored.
- *
- * The caller must have permission to read from the given devhandle, real
- * address, which must be an IO address.  The argument real address must be a
- * size aligned address.
- *
- * The hypervisor implementation of this function must block access to any
- * IO address that the guest does not have explicit permission to access.
- */
-#define HV_FAST_PCI_PEEK		0xb6
-
-/* pci_poke()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_POKE
- * ARG0:	devhandle
- * ARG1:	real address
- * ARG2:	size
- * ARG3:	data
- * ARG4:	pci_device
- * RET0:	status
- * RET1:	error_flag
- * ERRORS:	EINVAL		Invalid devhandle, size, or pci_device
- *		EBADALIGN	Improperly aligned real address
- *		ENORADDR	Bad real address
- *		ENOACCESS	Guest access prohibited
- *		ENOTSUPPORTED	Function is not supported by implementation
- *
- * Attempt to write data to the IO address given by the given devhandle,
- * real address, and size.  Size must be 1, 2, 4, or 8.  The write is
- * performed as a single access operation using the given size. Prior to
- * writing the data is size based swapped.
- *
- * If an error occurs when writing to the given location, do not generate an
- * error report, but return a non-zero value in RET1.  If the write was
- * successful, return zero in RET1.
- *
- * pci_device describes the configuration address of the device being
- * written to.  The implementation may safely read from offset 0 with
- * the configuration space of the device described by devhandle and
- * pci_device in order to guarantee that the write portion of the operation
- * completes
- *
- * Any error that occurs due to the read shall be reported using the normal
- * error reporting mechanisms .. the read error is not suppressed.
- *
- * The caller must have permission to write to the given devhandle, real
- * address, which must be an IO address.  The argument real address must be a
- * size aligned address.  The caller must have permission to read from
- * the given devhandle, pci_device cofiguration space offset 0.
- *
- * The hypervisor implementation of this function must block access to any
- * IO address that the guest does not have explicit permission to access.
- */
-#define HV_FAST_PCI_POKE		0xb7
-
-/* pci_dma_sync()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_DMA_SYNC
- * ARG0:	devhandle
- * ARG1:	real address
- * ARG2:	size
- * ARG3:	io_sync_direction
- * RET0:	status
- * RET1:	#synced
- * ERRORS:	EINVAL		Invalid devhandle or io_sync_direction
- *		ENORADDR	Bad real address
- *
- * Synchronize a memory region described by the given real address and size,
- * for the device defined by the given devhandle using the direction(s)
- * defined by the given io_sync_direction.  The argument size is the size of
- * the memory region in bytes.
- *
- * Return the actual number of bytes synchronized in the return value #synced,
- * which may be less than or equal to the argument size.  If the return
- * value #synced is less than size, the caller must continue to call this
- * function with updated real address and size arguments until the entire
- * memory region is synchronized.
- */
-#define HV_FAST_PCI_DMA_SYNC		0xb8
-
-/* PCI MSI services.  */
-
-#define HV_MSITYPE_MSI32		0x00
-#define HV_MSITYPE_MSI64		0x01
-
-#define HV_MSIQSTATE_IDLE		0x00
-#define HV_MSIQSTATE_ERROR		0x01
-
-#define HV_MSIQ_INVALID			0x00
-#define HV_MSIQ_VALID			0x01
-
-#define HV_MSISTATE_IDLE		0x00
-#define HV_MSISTATE_DELIVERED		0x01
-
-#define HV_MSIVALID_INVALID		0x00
-#define HV_MSIVALID_VALID		0x01
-
-#define HV_PCIE_MSGTYPE_PME_MSG		0x18
-#define HV_PCIE_MSGTYPE_PME_ACK_MSG	0x1b
-#define HV_PCIE_MSGTYPE_CORR_MSG	0x30
-#define HV_PCIE_MSGTYPE_NONFATAL_MSG	0x31
-#define HV_PCIE_MSGTYPE_FATAL_MSG	0x33
-
-#define HV_MSG_INVALID			0x00
-#define HV_MSG_VALID			0x01
-
-/* pci_msiq_conf()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_CONF
- * ARG0:	devhandle
- * ARG1:	msiqid
- * ARG2:	real address
- * ARG3:	number of entries
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle, msiqid or nentries
- *		EBADALIGN	Improperly aligned real address
- *		ENORADDR	Bad real address
- *
- * Configure the MSI queue given by the devhandle and msiqid arguments,
- * and to be placed at the given real address and be of the given
- * number of entries.  The real address must be aligned exactly to match
- * the queue size.  Each queue entry is 64-bytes long, so f.e. a 32 entry
- * queue must be aligned on a 2048 byte real address boundary.  The MSI-EQ
- * Head and Tail are initialized so that the MSI-EQ is 'empty'.
- *
- * Implementation Note: Certain implementations have fixed sized queues.  In
- *                      that case, number of entries must contain the correct
- *                      value.
- */
-#define HV_FAST_PCI_MSIQ_CONF		0xc0
-
-/* pci_msiq_info()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_INFO
- * ARG0:	devhandle
- * ARG1:	msiqid
- * RET0:	status
- * RET1:	real address
- * RET2:	number of entries
- * ERRORS:	EINVAL		Invalid devhandle or msiqid
- *
- * Return the configuration information for the MSI queue described
- * by the given devhandle and msiqid.  The base address of the queue
- * is returned in ARG1 and the number of entries is returned in ARG2.
- * If the queue is unconfigured, the real address is undefined and the
- * number of entries will be returned as zero.
- */
-#define HV_FAST_PCI_MSIQ_INFO		0xc1
-
-/* pci_msiq_getvalid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
- * ARG0:	devhandle
- * ARG1:	msiqid
- * RET0:	status
- * RET1:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
- * ERRORS:	EINVAL		Invalid devhandle or msiqid
- *
- * Get the valid state of the MSI-EQ described by the given devhandle and
- * msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETVALID	0xc2
-
-/* pci_msiq_setvalid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_SETVALID
- * ARG0:	devhandle
- * ARG1:	msiqid
- * ARG2:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqvalid
- *				value or MSI EQ is uninitialized
- *
- * Set the valid state of the MSI-EQ described by the given devhandle and
- * msiqid to the given msiqvalid.
- */
-#define HV_FAST_PCI_MSIQ_SETVALID	0xc3
-
-/* pci_msiq_getstate()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_GETSTATE
- * ARG0:	devhandle
- * ARG1:	msiqid
- * RET0:	status
- * RET1:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
- * ERRORS:	EINVAL		Invalid devhandle or msiqid
- *
- * Get the state of the MSI-EQ described by the given devhandle and
- * msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETSTATE	0xc4
-
-/* pci_msiq_getvalid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
- * ARG0:	devhandle
- * ARG1:	msiqid
- * ARG2:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqstate
- *				value or MSI EQ is uninitialized
- *
- * Set the state of the MSI-EQ described by the given devhandle and
- * msiqid to the given msiqvalid.
- */
-#define HV_FAST_PCI_MSIQ_SETSTATE	0xc5
-
-/* pci_msiq_gethead()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_GETHEAD
- * ARG0:	devhandle
- * ARG1:	msiqid
- * RET0:	status
- * RET1:	msiqhead
- * ERRORS:	EINVAL		Invalid devhandle or msiqid
- *
- * Get the current MSI EQ queue head for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETHEAD	0xc6
-
-/* pci_msiq_sethead()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_SETHEAD
- * ARG0:	devhandle
- * ARG1:	msiqid
- * ARG2:	msiqhead
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqhead,
- *				or MSI EQ is uninitialized
- *
- * Set the current MSI EQ queue head for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_SETHEAD	0xc7
-
-/* pci_msiq_gettail()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSIQ_GETTAIL
- * ARG0:	devhandle
- * ARG1:	msiqid
- * RET0:	status
- * RET1:	msiqtail
- * ERRORS:	EINVAL		Invalid devhandle or msiqid
- *
- * Get the current MSI EQ queue tail for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETTAIL	0xc8
-
-/* pci_msi_getvalid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSI_GETVALID
- * ARG0:	devhandle
- * ARG1:	msinum
- * RET0:	status
- * RET1:	msivalidstate
- * ERRORS:	EINVAL		Invalid devhandle or msinum
- *
- * Get the current valid/enabled state for the MSI defined by the
- * given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_GETVALID	0xc9
-
-/* pci_msi_setvalid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSI_SETVALID
- * ARG0:	devhandle
- * ARG1:	msinum
- * ARG2:	msivalidstate
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle or msinum or msivalidstate
- *
- * Set the current valid/enabled state for the MSI defined by the
- * given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_SETVALID	0xca
-
-/* pci_msi_getmsiq()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSI_GETMSIQ
- * ARG0:	devhandle
- * ARG1:	msinum
- * RET0:	status
- * RET1:	msiqid
- * ERRORS:	EINVAL		Invalid devhandle or msinum or MSI is unbound
- *
- * Get the MSI EQ that the MSI defined by the given devhandle and
- * msinum is bound to.
- */
-#define HV_FAST_PCI_MSI_GETMSIQ		0xcb
-
-/* pci_msi_setmsiq()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSI_SETMSIQ
- * ARG0:	devhandle
- * ARG1:	msinum
- * ARG2:	msitype
- * ARG3:	msiqid
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle or msinum or msiqid
- *
- * Set the MSI EQ that the MSI defined by the given devhandle and
- * msinum is bound to.
- */
-#define HV_FAST_PCI_MSI_SETMSIQ		0xcc
-
-/* pci_msi_getstate()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSI_GETSTATE
- * ARG0:	devhandle
- * ARG1:	msinum
- * RET0:	status
- * RET1:	msistate
- * ERRORS:	EINVAL		Invalid devhandle or msinum
- *
- * Get the state of the MSI defined by the given devhandle and msinum.
- * If not initialized, return HV_MSISTATE_IDLE.
- */
-#define HV_FAST_PCI_MSI_GETSTATE	0xcd
-
-/* pci_msi_setstate()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSI_SETSTATE
- * ARG0:	devhandle
- * ARG1:	msinum
- * ARG2:	msistate
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle or msinum or msistate
- *
- * Set the state of the MSI defined by the given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_SETSTATE	0xce
-
-/* pci_msg_getmsiq()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSG_GETMSIQ
- * ARG0:	devhandle
- * ARG1:	msgtype
- * RET0:	status
- * RET1:	msiqid
- * ERRORS:	EINVAL		Invalid devhandle or msgtype
- *
- * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_GETMSIQ		0xd0
-
-/* pci_msg_setmsiq()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSG_SETMSIQ
- * ARG0:	devhandle
- * ARG1:	msgtype
- * ARG2:	msiqid
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle, msgtype, or msiqid
- *
- * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_SETMSIQ		0xd1
-
-/* pci_msg_getvalid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSG_GETVALID
- * ARG0:	devhandle
- * ARG1:	msgtype
- * RET0:	status
- * RET1:	msgvalidstate
- * ERRORS:	EINVAL		Invalid devhandle or msgtype
- *
- * Get the valid/enabled state of the MSG defined by the given
- * devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_GETVALID	0xd2
-
-/* pci_msg_setvalid()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_PCI_MSG_SETVALID
- * ARG0:	devhandle
- * ARG1:	msgtype
- * ARG2:	msgvalidstate
- * RET0:	status
- * ERRORS:	EINVAL		Invalid devhandle or msgtype or msgvalidstate
- *
- * Set the valid/enabled state of the MSG defined by the given
- * devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_SETVALID	0xd3
-
-/* Logical Domain Channel services.  */
-
-#define LDC_CHANNEL_DOWN		0
-#define LDC_CHANNEL_UP			1
-#define LDC_CHANNEL_RESETTING		2
-
-/* ldc_tx_qconf()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_TX_QCONF
- * ARG0:	channel ID
- * ARG1:	real address base of queue
- * ARG2:	num entries in queue
- * RET0:	status
- *
- * Configure transmit queue for the LDC endpoint specified by the
- * given channel ID, to be placed at the given real address, and
- * be of the given num entries.  Num entries must be a power of two.
- * The real address base of the queue must be aligned on the queue
- * size.  Each queue entry is 64-bytes, so for example, a 32 entry
- * queue must be aligned on a 2048 byte real address boundary.
- *
- * Upon configuration of a valid transmit queue the head and tail
- * pointers are set to a hypervisor specific identical value indicating
- * that the queue initially is empty.
- *
- * The endpoint's transmit queue is un-configured if num entries is zero.
- *
- * The maximum number of entries for each queue for a specific cpu may be
- * determined from the machine description.  A transmit queue may be
- * specified even in the event that the LDC is down (peer endpoint has no
- * receive queue specified).  Transmission will begin as soon as the peer
- * endpoint defines a receive queue.
- *
- * It is recommended that a guest wait for a transmit queue to empty prior
- * to reconfiguring it, or un-configuring it.  Re or un-configuring of a
- * non-empty transmit queue behaves exactly as defined above, however it
- * is undefined as to how many of the pending entries in the original queue
- * will be delivered prior to the re-configuration taking effect.
- * Furthermore, as the queue configuration causes a reset of the head and
- * tail pointers there is no way for a guest to determine how many entries
- * have been sent after the configuration operation.
- */
-#define HV_FAST_LDC_TX_QCONF		0xe0
-
-/* ldc_tx_qinfo()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_TX_QINFO
- * ARG0:	channel ID
- * RET0:	status
- * RET1:	real address base of queue
- * RET2:	num entries in queue
- *
- * Return the configuration info for the transmit queue of LDC endpoint
- * defined by the given channel ID.  The real address is the currently
- * defined real address base of the defined queue, and num entries is the
- * size of the queue in terms of number of entries.
- *
- * If the specified channel ID is a valid endpoint number, but no transmit
- * queue has been defined this service will return success, but with num
- * entries set to zero and the real address will have an undefined value.
- */
-#define HV_FAST_LDC_TX_QINFO		0xe1
-
-/* ldc_tx_get_state()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_TX_GET_STATE
- * ARG0:	channel ID
- * RET0:	status
- * RET1:	head offset
- * RET2:	tail offset
- * RET3:	channel state
- *
- * Return the transmit state, and the head and tail queue pointers, for
- * the transmit queue of the LDC endpoint defined by the given channel ID.
- * The head and tail values are the byte offset of the head and tail
- * positions of the transmit queue for the specified endpoint.
- */
-#define HV_FAST_LDC_TX_GET_STATE	0xe2
-
-/* ldc_tx_set_qtail()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_TX_SET_QTAIL
- * ARG0:	channel ID
- * ARG1:	tail offset
- * RET0:	status
- *
- * Update the tail pointer for the transmit queue associated with the LDC
- * endpoint defined by the given channel ID.  The tail offset specified
- * must be aligned on a 64 byte boundary, and calculated so as to increase
- * the number of pending entries on the transmit queue.  Any attempt to
- * decrease the number of pending transmit queue entires is considered
- * an invalid tail offset and will result in an EINVAL error.
- *
- * Since the tail of the transmit queue may not be moved backwards, the
- * transmit queue may be flushed by configuring a new transmit queue,
- * whereupon the hypervisor will configure the initial transmit head and
- * tail pointers to be equal.
- */
-#define HV_FAST_LDC_TX_SET_QTAIL	0xe3
-
-/* ldc_rx_qconf()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_RX_QCONF
- * ARG0:	channel ID
- * ARG1:	real address base of queue
- * ARG2:	num entries in queue
- * RET0:	status
- *
- * Configure receive queue for the LDC endpoint specified by the
- * given channel ID, to be placed at the given real address, and
- * be of the given num entries.  Num entries must be a power of two.
- * The real address base of the queue must be aligned on the queue
- * size.  Each queue entry is 64-bytes, so for example, a 32 entry
- * queue must be aligned on a 2048 byte real address boundary.
- *
- * The endpoint's transmit queue is un-configured if num entries is zero.
- *
- * If a valid receive queue is specified for a local endpoint the LDC is
- * in the up state for the purpose of transmission to this endpoint.
- *
- * The maximum number of entries for each queue for a specific cpu may be
- * determined from the machine description.
- *
- * As receive queue configuration causes a reset of the queue's head and
- * tail pointers there is no way for a gues to determine how many entries
- * have been received between a preceeding ldc_get_rx_state() API call
- * and the completion of the configuration operation.  It should be noted
- * that datagram delivery is not guarenteed via domain channels anyway,
- * and therefore any higher protocol should be resilient to datagram
- * loss if necessary.  However, to overcome this specific race potential
- * it is recommended, for example, that a higher level protocol be employed
- * to ensure either retransmission, or ensure that no datagrams are pending
- * on the peer endpoint's transmit queue prior to the configuration process.
- */
-#define HV_FAST_LDC_RX_QCONF		0xe4
-
-/* ldc_rx_qinfo()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_RX_QINFO
- * ARG0:	channel ID
- * RET0:	status
- * RET1:	real address base of queue
- * RET2:	num entries in queue
- *
- * Return the configuration info for the receive queue of LDC endpoint
- * defined by the given channel ID.  The real address is the currently
- * defined real address base of the defined queue, and num entries is the
- * size of the queue in terms of number of entries.
- *
- * If the specified channel ID is a valid endpoint number, but no receive
- * queue has been defined this service will return success, but with num
- * entries set to zero and the real address will have an undefined value.
- */
-#define HV_FAST_LDC_RX_QINFO		0xe5
-
-/* ldc_rx_get_state()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_RX_GET_STATE
- * ARG0:	channel ID
- * RET0:	status
- * RET1:	head offset
- * RET2:	tail offset
- * RET3:	channel state
- *
- * Return the receive state, and the head and tail queue pointers, for
- * the receive queue of the LDC endpoint defined by the given channel ID.
- * The head and tail values are the byte offset of the head and tail
- * positions of the receive queue for the specified endpoint.
- */
-#define HV_FAST_LDC_RX_GET_STATE	0xe6
-
-/* ldc_rx_set_qhead()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_RX_SET_QHEAD
- * ARG0:	channel ID
- * ARG1:	head offset
- * RET0:	status
- *
- * Update the head pointer for the receive queue associated with the LDC
- * endpoint defined by the given channel ID.  The head offset specified
- * must be aligned on a 64 byte boundary, and calculated so as to decrease
- * the number of pending entries on the receive queue.  Any attempt to
- * increase the number of pending receive queue entires is considered
- * an invalid head offset and will result in an EINVAL error.
- *
- * The receive queue may be flushed by setting the head offset equal
- * to the current tail offset.
- */
-#define HV_FAST_LDC_RX_SET_QHEAD	0xe7
-
-/* LDC Map Table Entry.  Each slot is defined by a translation table
- * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
- * hypervisor invalidation cookie.
- */
-#define LDC_MTE_PADDR	0x0fffffffffffe000 /* pa[55:13]          */
-#define LDC_MTE_COPY_W	0x0000000000000400 /* copy write access  */
-#define LDC_MTE_COPY_R	0x0000000000000200 /* copy read access   */
-#define LDC_MTE_IOMMU_W	0x0000000000000100 /* IOMMU write access */
-#define LDC_MTE_IOMMU_R	0x0000000000000080 /* IOMMU read access  */
-#define LDC_MTE_EXEC	0x0000000000000040 /* execute            */
-#define LDC_MTE_WRITE	0x0000000000000020 /* read               */
-#define LDC_MTE_READ	0x0000000000000010 /* write              */
-#define LDC_MTE_SZALL	0x000000000000000f /* page size bits     */
-#define LDC_MTE_SZ16GB	0x0000000000000007 /* 16GB page          */
-#define LDC_MTE_SZ2GB	0x0000000000000006 /* 2GB page           */
-#define LDC_MTE_SZ256MB	0x0000000000000005 /* 256MB page         */
-#define LDC_MTE_SZ32MB	0x0000000000000004 /* 32MB page          */
-#define LDC_MTE_SZ4MB	0x0000000000000003 /* 4MB page           */
-#define LDC_MTE_SZ512K	0x0000000000000002 /* 512K page          */
-#define LDC_MTE_SZ64K	0x0000000000000001 /* 64K page           */
-#define LDC_MTE_SZ8K	0x0000000000000000 /* 8K page            */
-
-#ifndef __ASSEMBLY__
-struct ldc_mtable_entry {
-	unsigned long	mte;
-	unsigned long	cookie;
-};
-#endif
-
-/* ldc_set_map_table()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_SET_MAP_TABLE
- * ARG0:	channel ID
- * ARG1:	table real address
- * ARG2:	num entries
- * RET0:	status
- *
- * Register the MTE table at the given table real address, with the
- * specified num entries, for the LDC indicated by the given channel
- * ID.
- */
-#define HV_FAST_LDC_SET_MAP_TABLE	0xea
-
-/* ldc_get_map_table()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_GET_MAP_TABLE
- * ARG0:	channel ID
- * RET0:	status
- * RET1:	table real address
- * RET2:	num entries
- *
- * Return the configuration of the current mapping table registered
- * for the given channel ID.
- */
-#define HV_FAST_LDC_GET_MAP_TABLE	0xeb
-
-#define LDC_COPY_IN	0
-#define LDC_COPY_OUT	1
-
-/* ldc_copy()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_COPY
- * ARG0:	channel ID
- * ARG1:	LDC_COPY_* direction code
- * ARG2:	target real address
- * ARG3:	local real address
- * ARG4:	length in bytes
- * RET0:	status
- * RET1:	actual length in bytes
- */
-#define HV_FAST_LDC_COPY		0xec
-
-#define LDC_MEM_READ	1
-#define LDC_MEM_WRITE	2
-#define LDC_MEM_EXEC	4
-
-/* ldc_mapin()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_MAPIN
- * ARG0:	channel ID
- * ARG1:	cookie
- * RET0:	status
- * RET1:	real address
- * RET2:	LDC_MEM_* permissions
- */
-#define HV_FAST_LDC_MAPIN		0xed
-
-/* ldc_unmap()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_UNMAP
- * ARG0:	real address
- * RET0:	status
- */
-#define HV_FAST_LDC_UNMAP		0xee
-
-/* ldc_revoke()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_LDC_REVOKE
- * ARG0:	channel ID
- * ARG1:	cookie
- * ARG2:	ldc_mtable_entry cookie
- * RET0:	status
- */
-#define HV_FAST_LDC_REVOKE		0xef
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
-					unsigned long ra,
-					unsigned long num_entries);
-extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
-					unsigned long *ra,
-					unsigned long *num_entries);
-extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
-					    unsigned long *head_off,
-					    unsigned long *tail_off,
-					    unsigned long *chan_state);
-extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
-					    unsigned long tail_off);
-extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
-					unsigned long ra,
-					unsigned long num_entries);
-extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
-					unsigned long *ra,
-					unsigned long *num_entries);
-extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
-					    unsigned long *head_off,
-					    unsigned long *tail_off,
-					    unsigned long *chan_state);
-extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
-					    unsigned long head_off);
-extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
-					     unsigned long ra,
-					     unsigned long num_entries);
-extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
-					     unsigned long *ra,
-					     unsigned long *num_entries);
-extern unsigned long sun4v_ldc_copy(unsigned long channel,
-				    unsigned long dir_code,
-				    unsigned long tgt_raddr,
-				    unsigned long lcl_raddr,
-				    unsigned long len,
-				    unsigned long *actual_len);
-extern unsigned long sun4v_ldc_mapin(unsigned long channel,
-				     unsigned long cookie,
-				     unsigned long *ra,
-				     unsigned long *perm);
-extern unsigned long sun4v_ldc_unmap(unsigned long ra);
-extern unsigned long sun4v_ldc_revoke(unsigned long channel,
-				      unsigned long cookie,
-				      unsigned long mte_cookie);
-#endif
-
-/* Performance counter services.  */
-
-#define HV_PERF_JBUS_PERF_CTRL_REG	0x00
-#define HV_PERF_JBUS_PERF_CNT_REG	0x01
-#define HV_PERF_DRAM_PERF_CTRL_REG_0	0x02
-#define HV_PERF_DRAM_PERF_CNT_REG_0	0x03
-#define HV_PERF_DRAM_PERF_CTRL_REG_1	0x04
-#define HV_PERF_DRAM_PERF_CNT_REG_1	0x05
-#define HV_PERF_DRAM_PERF_CTRL_REG_2	0x06
-#define HV_PERF_DRAM_PERF_CNT_REG_2	0x07
-#define HV_PERF_DRAM_PERF_CTRL_REG_3	0x08
-#define HV_PERF_DRAM_PERF_CNT_REG_3	0x09
-
-/* get_perfreg()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_GET_PERFREG
- * ARG0:	performance reg number
- * RET0:	status
- * RET1:	performance reg value
- * ERRORS:	EINVAL		Invalid performance register number
- *		ENOACCESS	No access allowed to performance counters
- *
- * Read the value of the given DRAM/JBUS performance counter/control register.
- */
-#define HV_FAST_GET_PERFREG		0x100
-
-/* set_perfreg()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_SET_PERFREG
- * ARG0:	performance reg number
- * ARG1:	performance reg value
- * RET0:	status
- * ERRORS:	EINVAL		Invalid performance register number
- *		ENOACCESS	No access allowed to performance counters
- *
- * Write the given performance reg value to the given DRAM/JBUS
- * performance counter/control register.
- */
-#define HV_FAST_SET_PERFREG		0x101
-
-/* MMU statistics services.
- *
- * The hypervisor maintains MMU statistics and privileged code provides
- * a buffer where these statistics can be collected.  It is continually
- * updated once configured.  The layout is as follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_mmu_statistics {
-	unsigned long immu_tsb_hits_ctx0_8k_tte;
-	unsigned long immu_tsb_ticks_ctx0_8k_tte;
-	unsigned long immu_tsb_hits_ctx0_64k_tte;
-	unsigned long immu_tsb_ticks_ctx0_64k_tte;
-	unsigned long __reserved1[2];
-	unsigned long immu_tsb_hits_ctx0_4mb_tte;
-	unsigned long immu_tsb_ticks_ctx0_4mb_tte;
-	unsigned long __reserved2[2];
-	unsigned long immu_tsb_hits_ctx0_256mb_tte;
-	unsigned long immu_tsb_ticks_ctx0_256mb_tte;
-	unsigned long __reserved3[4];
-	unsigned long immu_tsb_hits_ctxnon0_8k_tte;
-	unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
-	unsigned long immu_tsb_hits_ctxnon0_64k_tte;
-	unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
-	unsigned long __reserved4[2];
-	unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
-	unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
-	unsigned long __reserved5[2];
-	unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
-	unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
-	unsigned long __reserved6[4];
-	unsigned long dmmu_tsb_hits_ctx0_8k_tte;
-	unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
-	unsigned long dmmu_tsb_hits_ctx0_64k_tte;
-	unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
-	unsigned long __reserved7[2];
-	unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
-	unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
-	unsigned long __reserved8[2];
-	unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
-	unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
-	unsigned long __reserved9[4];
-	unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
-	unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
-	unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
-	unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
-	unsigned long __reserved10[2];
-	unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
-	unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
-	unsigned long __reserved11[2];
-	unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
-	unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
-	unsigned long __reserved12[4];
-};
-#endif
-
-/* mmustat_conf()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMUSTAT_CONF
- * ARG0:	real address
- * RET0:	status
- * RET1:	real address
- * ERRORS:	ENORADDR	Invalid real address
- *		EBADALIGN	Real address not aligned on 64-byte boundary
- *		EBADTRAP	API not supported on this processor
- *
- * Enable MMU statistic gathering using the buffer at the given real
- * address on the current virtual CPU.  The new buffer real address
- * is given in ARG1, and the previously specified buffer real address
- * is returned in RET1, or is returned as zero for the first invocation.
- *
- * If the passed in real address argument is zero, this will disable
- * MMU statistic collection on the current virtual CPU.  If an error is
- * returned then no statistics are collected.
- *
- * The buffer contents should be initialized to all zeros before being
- * given to the hypervisor or else the statistics will be meaningless.
- */
-#define HV_FAST_MMUSTAT_CONF		0x102
-
-/* mmustat_info()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_MMUSTAT_INFO
- * RET0:	status
- * RET1:	real address
- * ERRORS:	EBADTRAP	API not supported on this processor
- *
- * Return the current state and real address of the currently configured
- * MMU statistics buffer on the current virtual CPU.
- */
-#define HV_FAST_MMUSTAT_INFO		0x103
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra);
-extern unsigned long sun4v_mmustat_info(unsigned long *ra);
-#endif
-
-/* NCS crypto services  */
-
-/* ncs_request() sub-function numbers */
-#define HV_NCS_QCONF			0x01
-#define HV_NCS_QTAIL_UPDATE		0x02
-
-#ifndef __ASSEMBLY__
-struct hv_ncs_queue_entry {
-	/* MAU Control Register */
-	unsigned long	mau_control;
-#define MAU_CONTROL_INV_PARITY	0x0000000000002000
-#define MAU_CONTROL_STRAND	0x0000000000001800
-#define MAU_CONTROL_BUSY	0x0000000000000400
-#define MAU_CONTROL_INT		0x0000000000000200
-#define MAU_CONTROL_OP		0x00000000000001c0
-#define MAU_CONTROL_OP_SHIFT	6
-#define MAU_OP_LOAD_MA_MEMORY	0x0
-#define MAU_OP_STORE_MA_MEMORY	0x1
-#define MAU_OP_MODULAR_MULT	0x2
-#define MAU_OP_MODULAR_REDUCE	0x3
-#define MAU_OP_MODULAR_EXP_LOOP	0x4
-#define MAU_CONTROL_LEN		0x000000000000003f
-#define MAU_CONTROL_LEN_SHIFT	0
-
-	/* Real address of bytes to load or store bytes
-	 * into/out-of the MAU.
-	 */
-	unsigned long	mau_mpa;
-
-	/* Modular Arithmetic MA Offset Register.  */
-	unsigned long	mau_ma;
-
-	/* Modular Arithmetic N Prime Register.  */
-	unsigned long	mau_np;
-};
-
-struct hv_ncs_qconf_arg {
-	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
-	unsigned long	base;     /* Real address base of queue */
-	unsigned long	end;	  /* Real address end of queue */
-	unsigned long	num_ents; /* Number of entries in queue */
-};
-
-struct hv_ncs_qtail_update_arg {
-	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
-	unsigned long	tail;     /* New tail index to use */
-	unsigned long	syncflag; /* only SYNCFLAG_SYNC is implemented */
-#define HV_NCS_SYNCFLAG_SYNC	0x00
-#define HV_NCS_SYNCFLAG_ASYNC	0x01
-};
-#endif
-
-/* ncs_request()
- * TRAP:	HV_FAST_TRAP
- * FUNCTION:	HV_FAST_NCS_REQUEST
- * ARG0:	NCS sub-function
- * ARG1:	sub-function argument real address
- * ARG2:	size in bytes of sub-function argument
- * RET0:	status
- *
- * The MAU chip of the Niagara processor is not directly accessible
- * to privileged code, instead it is programmed indirectly via this
- * hypervisor API.
- *
- * The interfaces defines a queue of MAU operations to perform.
- * Privileged code registers a queue with the hypervisor by invoking
- * this HVAPI with the HV_NCS_QCONF sub-function, which defines the
- * base, end, and number of entries of the queue.  Each queue entry
- * contains a MAU register struct block.
- *
- * The privileged code then proceeds to add entries to the queue and
- * then invoke the HV_NCS_QTAIL_UPDATE sub-function.  Since only
- * synchronous operations are supported by the current hypervisor,
- * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to
- * completion and return HV_EOK, or return an error code.
- *
- * The real address of the sub-function argument must be aligned on at
- * least an 8-byte boundary.
- *
- * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte
- * offset, into the queue and must be less than or equal the 'num_ents'
- * argument given in the HV_NCS_QCONF call.
- */
-#define HV_FAST_NCS_REQUEST		0x110
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_ncs_request(unsigned long request,
-				       unsigned long arg_ra,
-				       unsigned long arg_size);
-#endif
-
-#define HV_FAST_FIRE_GET_PERFREG	0x120
-#define HV_FAST_FIRE_SET_PERFREG	0x121
-
-/* Function numbers for HV_CORE_TRAP.  */
-#define HV_CORE_SET_VER			0x00
-#define HV_CORE_PUTCHAR			0x01
-#define HV_CORE_EXIT			0x02
-#define HV_CORE_GET_VER			0x03
-
-/* Hypervisor API groups for use with HV_CORE_SET_VER and
- * HV_CORE_GET_VER.
- */
-#define HV_GRP_SUN4V			0x0000
-#define HV_GRP_CORE			0x0001
-#define HV_GRP_INTR			0x0002
-#define HV_GRP_SOFT_STATE		0x0003
-#define HV_GRP_PCI			0x0100
-#define HV_GRP_LDOM			0x0101
-#define HV_GRP_SVC_CHAN			0x0102
-#define HV_GRP_NCS			0x0103
-#define HV_GRP_NIAG_PERF		0x0200
-#define HV_GRP_FIRE_PERF		0x0201
-#define HV_GRP_DIAG			0x0300
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_get_version(unsigned long group,
-				       unsigned long *major,
-				       unsigned long *minor);
-extern unsigned long sun4v_set_version(unsigned long group,
-				       unsigned long major,
-				       unsigned long minor,
-				       unsigned long *actual_minor);
-
-extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
-				unsigned long *minor);
-extern void sun4v_hvapi_unregister(unsigned long group);
-extern int sun4v_hvapi_get(unsigned long group,
-			   unsigned long *major,
-			   unsigned long *minor);
-extern void sun4v_hvapi_init(void);
-#endif
-
-#endif /* !(_SPARC64_HYPERVISOR_H) */
diff --git a/include/asm-sparc64/ide.h b/include/asm-sparc64/ide.h
deleted file mode 100644
index 1282676da1cd..000000000000
--- a/include/asm-sparc64/ide.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * ide.h: Ultra/PCI specific IDE glue.
- *
- * Copyright (C) 1997  David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
- */
-
-#ifndef _SPARC64_IDE_H
-#define _SPARC64_IDE_H
-
-#ifdef __KERNEL__
-
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-#include <asm/spitfire.h>
-#include <asm/cacheflush.h>
-#include <asm/page.h>
-
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	2
-# endif
-#endif
-
-#define __ide_insl(data_reg, buffer, wcount) \
-	__ide_insw(data_reg, buffer, (wcount)<<1)
-#define __ide_outsl(data_reg, buffer, wcount) \
-	__ide_outsw(data_reg, buffer, (wcount)<<1)
-
-/* On sparc64, I/O ports and MMIO registers are accessed identically.  */
-#define __ide_mm_insw	__ide_insw
-#define __ide_mm_insl	__ide_insl
-#define __ide_mm_outsw	__ide_outsw
-#define __ide_mm_outsl	__ide_outsl
-
-static inline unsigned int inw_be(void __iomem *addr)
-{
-	unsigned int ret;
-
-	__asm__ __volatile__("lduha [%1] %2, %0"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
-{
-#ifdef DCACHE_ALIASING_POSSIBLE
-	unsigned long end = (unsigned long)dst + (count << 1);
-#endif
-	u16 *ps = dst;
-	u32 *pi;
-
-	if(((u64)ps) & 0x2) {
-		*ps++ = inw_be(port);
-		count--;
-	}
-	pi = (u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w  = inw_be(port) << 16;
-		w |= inw_be(port);
-		*pi++ = w;
-		count -= 2;
-	}
-	ps = (u16 *)pi;
-	if(count)
-		*ps++ = inw_be(port);
-
-#ifdef DCACHE_ALIASING_POSSIBLE
-	__flush_dcache_range((unsigned long)dst, end);
-#endif
-}
-
-static inline void outw_be(unsigned short w, void __iomem *addr)
-{
-	__asm__ __volatile__("stha %0, [%1] %2"
-			     : /* no outputs */
-			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void __ide_outsw(void __iomem *port, void *src, u32 count)
-{
-#ifdef DCACHE_ALIASING_POSSIBLE
-	unsigned long end = (unsigned long)src + (count << 1);
-#endif
-	const u16 *ps = src;
-	const u32 *pi;
-
-	if(((u64)src) & 0x2) {
-		outw_be(*ps++, port);
-		count--;
-	}
-	pi = (const u32 *)ps;
-	while(count >= 2) {
-		u32 w;
-
-		w = *pi++;
-		outw_be((w >> 16), port);
-		outw_be(w, port);
-		count -= 2;
-	}
-	ps = (const u16 *)pi;
-	if(count)
-		outw_be(*ps, port);
-
-#ifdef DCACHE_ALIASING_POSSIBLE
-	__flush_dcache_range((unsigned long)src, end);
-#endif
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _SPARC64_IDE_H */
diff --git a/include/asm-sparc64/idprom.h b/include/asm-sparc64/idprom.h
deleted file mode 100644
index a363fa0a112a..000000000000
--- a/include/asm-sparc64/idprom.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * idprom.h: Macros and defines for idprom routines
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC64_IDPROM_H
-#define _SPARC64_IDPROM_H
-
-#include <linux/types.h>
-
-struct idprom {
-	u8		id_format;	/* Format identifier (always 0x01) */
-	u8		id_machtype;	/* Machine type */
-	u8		id_ethaddr[6];	/* Hardware ethernet address */
-	s32		id_date;	/* Date of manufacture */
-	u32		id_sernum:24;	/* Unique serial number */
-	u8		id_cksum;	/* Checksum - xor of the data bytes */
-	u8		reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-#endif /* !(_SPARC_IDPROM_H) */
diff --git a/include/asm-sparc64/intr_queue.h b/include/asm-sparc64/intr_queue.h
deleted file mode 100644
index 206077dedc2a..000000000000
--- a/include/asm-sparc64/intr_queue.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _SPARC64_INTR_QUEUE_H
-#define _SPARC64_INTR_QUEUE_H
-
-/* Sun4v interrupt queue registers, accessed via ASI_QUEUE.  */
-
-#define INTRQ_CPU_MONDO_HEAD	  0x3c0 /* CPU mondo head	          */
-#define INTRQ_CPU_MONDO_TAIL	  0x3c8 /* CPU mondo tail	          */
-#define INTRQ_DEVICE_MONDO_HEAD	  0x3d0 /* Device mondo head	          */
-#define INTRQ_DEVICE_MONDO_TAIL	  0x3d8 /* Device mondo tail	          */
-#define INTRQ_RESUM_MONDO_HEAD	  0x3e0 /* Resumable error mondo head     */
-#define INTRQ_RESUM_MONDO_TAIL	  0x3e8 /* Resumable error mondo tail     */
-#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */
-#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */
-
-#endif /* !(_SPARC64_INTR_QUEUE_H) */
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
deleted file mode 100644
index 3158960f3eb5..000000000000
--- a/include/asm-sparc64/io.h
+++ /dev/null
@@ -1,511 +0,0 @@
-#ifndef __SPARC64_IO_H
-#define __SPARC64_IO_H
-
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#include <asm/page.h>      /* IO address mapping routines need this */
-#include <asm/system.h>
-#include <asm/asi.h>
-
-/* PC crapola... */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
-/* BIO layer definitions. */
-extern unsigned long kern_base, kern_size;
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-#define BIO_VMERGE_BOUNDARY	8192
-
-static inline u8 _inb(unsigned long addr)
-{
-	u8 ret;
-
-	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-
-	return ret;
-}
-
-static inline u16 _inw(unsigned long addr)
-{
-	u16 ret;
-
-	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-
-	return ret;
-}
-
-static inline u32 _inl(unsigned long addr)
-{
-	u32 ret;
-
-	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-
-	return ret;
-}
-
-static inline void _outb(u8 b, unsigned long addr)
-{
-	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
-			     : /* no outputs */
-			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-}
-
-static inline void _outw(u16 w, unsigned long addr)
-{
-	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
-			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-}
-
-static inline void _outl(u32 l, unsigned long addr)
-{
-	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
-			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-}
-
-#define inb(__addr)		(_inb((unsigned long)(__addr)))
-#define inw(__addr)		(_inw((unsigned long)(__addr)))
-#define inl(__addr)		(_inl((unsigned long)(__addr)))
-#define outb(__b, __addr)	(_outb((u8)(__b), (unsigned long)(__addr)))
-#define outw(__w, __addr)	(_outw((u16)(__w), (unsigned long)(__addr)))
-#define outl(__l, __addr)	(_outl((u32)(__l), (unsigned long)(__addr)))
-
-#define inb_p(__addr) 		inb(__addr)
-#define outb_p(__b, __addr)	outb(__b, __addr)
-#define inw_p(__addr)		inw(__addr)
-#define outw_p(__w, __addr)	outw(__w, __addr)
-#define inl_p(__addr)		inl(__addr)
-#define outl_p(__l, __addr)	outl(__l, __addr)
-
-extern void outsb(unsigned long, const void *, unsigned long);
-extern void outsw(unsigned long, const void *, unsigned long);
-extern void outsl(unsigned long, const void *, unsigned long);
-extern void insb(unsigned long, void *, unsigned long);
-extern void insw(unsigned long, void *, unsigned long);
-extern void insl(unsigned long, void *, unsigned long);
-
-static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
-{
-	insb((unsigned long __force)port, buf, count);
-}
-static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
-{
-	insw((unsigned long __force)port, buf, count);
-}
-
-static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
-{
-	insl((unsigned long __force)port, buf, count);
-}
-
-static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
-{
-	outsb((unsigned long __force)port, buf, count);
-}
-
-static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
-{
-	outsw((unsigned long __force)port, buf, count);
-}
-
-static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
-{
-	outsl((unsigned long __force)port, buf, count);
-}
-
-/* Memory functions, same as I/O accesses on Ultra. */
-static inline u8 _readb(const volatile void __iomem *addr)
-{	u8 ret;
-
-	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-	return ret;
-}
-
-static inline u16 _readw(const volatile void __iomem *addr)
-{	u16 ret;
-
-	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-
-	return ret;
-}
-
-static inline u32 _readl(const volatile void __iomem *addr)
-{	u32 ret;
-
-	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-
-	return ret;
-}
-
-static inline u64 _readq(const volatile void __iomem *addr)
-{	u64 ret;
-
-	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-
-	return ret;
-}
-
-static inline void _writeb(u8 b, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
-			     : /* no outputs */
-			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-}
-
-static inline void _writew(u16 w, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
-			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-}
-
-static inline void _writel(u32 l, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
-			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-}
-
-static inline void _writeq(u64 q, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
-			     : /* no outputs */
-			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
-			     : "memory");
-}
-
-#define readb(__addr)		_readb(__addr)
-#define readw(__addr)		_readw(__addr)
-#define readl(__addr)		_readl(__addr)
-#define readq(__addr)		_readq(__addr)
-#define readb_relaxed(__addr)	_readb(__addr)
-#define readw_relaxed(__addr)	_readw(__addr)
-#define readl_relaxed(__addr)	_readl(__addr)
-#define readq_relaxed(__addr)	_readq(__addr)
-#define writeb(__b, __addr)	_writeb(__b, __addr)
-#define writew(__w, __addr)	_writew(__w, __addr)
-#define writel(__l, __addr)	_writel(__l, __addr)
-#define writeq(__q, __addr)	_writeq(__q, __addr)
-
-/* Now versions without byte-swapping. */
-static inline u8 _raw_readb(unsigned long addr)
-{
-	u8 ret;
-
-	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_raw_readb */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline u16 _raw_readw(unsigned long addr)
-{
-	u16 ret;
-
-	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_raw_readw */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline u32 _raw_readl(unsigned long addr)
-{
-	u32 ret;
-
-	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_raw_readl */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline u64 _raw_readq(unsigned long addr)
-{
-	u64 ret;
-
-	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_raw_readq */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline void _raw_writeb(u8 b, unsigned long addr)
-{
-	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */"
-			     : /* no outputs */
-			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _raw_writew(u16 w, unsigned long addr)
-{
-	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */"
-			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _raw_writel(u32 l, unsigned long addr)
-{
-	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
-			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _raw_writeq(u64 q, unsigned long addr)
-{
-	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
-			     : /* no outputs */
-			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-#define __raw_readb(__addr)		(_raw_readb((unsigned long)(__addr)))
-#define __raw_readw(__addr)		(_raw_readw((unsigned long)(__addr)))
-#define __raw_readl(__addr)		(_raw_readl((unsigned long)(__addr)))
-#define __raw_readq(__addr)		(_raw_readq((unsigned long)(__addr)))
-#define __raw_writeb(__b, __addr)	(_raw_writeb((u8)(__b), (unsigned long)(__addr)))
-#define __raw_writew(__w, __addr)	(_raw_writew((u16)(__w), (unsigned long)(__addr)))
-#define __raw_writel(__l, __addr)	(_raw_writel((u32)(__l), (unsigned long)(__addr)))
-#define __raw_writeq(__q, __addr)	(_raw_writeq((u64)(__q), (unsigned long)(__addr)))
-
-/* Valid I/O Space regions are anywhere, because each PCI bus supported
- * can live in an arbitrary area of the physical address range.
- */
-#define IO_SPACE_LIMIT 0xffffffffffffffffUL
-
-/* Now, SBUS variants, only difference from PCI is that we do
- * not use little-endian ASIs.
- */
-static inline u8 _sbus_readb(const volatile void __iomem *addr)
-{
-	u8 ret;
-
-	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-
-	return ret;
-}
-
-static inline u16 _sbus_readw(const volatile void __iomem *addr)
-{
-	u16 ret;
-
-	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-
-	return ret;
-}
-
-static inline u32 _sbus_readl(const volatile void __iomem *addr)
-{
-	u32 ret;
-
-	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-
-	return ret;
-}
-
-static inline u64 _sbus_readq(const volatile void __iomem *addr)
-{
-	u64 ret;
-
-	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-
-	return ret;
-}
-
-static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
-			     : /* no outputs */
-			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-}
-
-static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
-			     : /* no outputs */
-			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-}
-
-static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
-			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-}
-
-static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
-{
-	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
-			     : /* no outputs */
-			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
-			     : "memory");
-}
-
-#define sbus_readb(__addr)		_sbus_readb(__addr)
-#define sbus_readw(__addr)		_sbus_readw(__addr)
-#define sbus_readl(__addr)		_sbus_readl(__addr)
-#define sbus_readq(__addr)		_sbus_readq(__addr)
-#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
-#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
-#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
-#define sbus_writeq(__l, __addr)	_sbus_writeq(__l, __addr)
-
-static inline void _sbus_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
-{
-	while(n--) {
-		sbus_writeb(c, dst);
-		dst++;
-	}
-}
-
-#define sbus_memset_io(d,c,sz)	_sbus_memset_io(d,c,sz)
-
-static inline void
-_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
-{
-	volatile void __iomem *d = dst;
-
-	while (n--) {
-		writeb(c, d);
-		d++;
-	}
-}
-
-#define memset_io(d,c,sz)	_memset_io(d,c,sz)
-
-static inline void
-_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
-{
-	char *d = dst;
-
-	while (n--) {
-		char tmp = readb(src);
-		*d++ = tmp;
-		src++;
-	}
-}
-
-#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
-
-static inline void 
-_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
-{
-	const char *s = src;
-	volatile void __iomem *d = dst;
-
-	while (n--) {
-		char tmp = *s++;
-		writeb(tmp, d);
-		d++;
-	}
-}
-
-#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
-
-#define mmiowb()
-
-#ifdef __KERNEL__
-
-/* On sparc64 we have the whole physical IO address space accessible
- * using physically addressed loads and stores, so this does nothing.
- */
-static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
-{
-	return (void __iomem *)offset;
-}
-
-#define ioremap_nocache(X,Y)		ioremap((X),(Y))
-
-static inline void iounmap(volatile void __iomem *addr)
-{
-}
-
-#define ioread8(X)			readb(X)
-#define ioread16(X)			readw(X)
-#define ioread32(X)			readl(X)
-#define iowrite8(val,X)			writeb(val,X)
-#define iowrite16(val,X)		writew(val,X)
-#define iowrite32(val,X)		writel(val,X)
-
-/* Create a virtual mapping cookie for an IO port range */
-extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
-extern void ioport_unmap(void __iomem *);
-
-/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-
-/* Similarly for SBUS. */
-#define sbus_ioremap(__res, __offset, __size, __name) \
-({	unsigned long __ret; \
-	__ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
-	__ret += (unsigned long) (__offset); \
-	if (! request_region((__ret), (__size), (__name))) \
-		__ret = 0UL; \
-	(void __iomem *) __ret; \
-})
-
-#define sbus_iounmap(__addr, __size)	\
-	release_region((unsigned long)(__addr), (__size))
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif
-
-#endif /* !(__SPARC64_IO_H) */
diff --git a/include/asm-sparc64/ioctl.h b/include/asm-sparc64/ioctl.h
deleted file mode 100644
index d634c21b4724..000000000000
--- a/include/asm-sparc64/ioctl.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _SPARC64_IOCTL_H
-#define _SPARC64_IOCTL_H
-
-/*
- * Our DIR and SIZE overlap in order to simulteneously provide
- * a non-zero _IOC_NONE (for binary compatibility) and
- * 14 bits of size as on i386. Here's the layout:
- *
- *   0xE0000000   DIR
- *   0x80000000     DIR = WRITE
- *   0x40000000     DIR = READ
- *   0x20000000     DIR = NONE
- *   0x3FFF0000   SIZE (overlaps NONE bit)
- *   0x0000FF00   TYPE
- *   0x000000FF   NR (CMD)
- */
-
-#define _IOC_NRBITS      8
-#define _IOC_TYPEBITS    8
-#define _IOC_SIZEBITS   13	/* Actually 14, see below. */
-#define _IOC_DIRBITS     3
-
-#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
-#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
-#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
-#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
-#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
-
-#define _IOC_NRSHIFT     0
-#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
-#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
-#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
-
-#define _IOC_NONE        1U
-#define _IOC_READ        2U
-#define _IOC_WRITE       4U
-
-#define _IOC(dir,type,nr,size) \
-        (((dir)  << _IOC_DIRSHIFT) | \
-         ((type) << _IOC_TYPESHIFT) | \
-         ((nr)   << _IOC_NRSHIFT) | \
-         ((size) << _IOC_SIZESHIFT))
-
-#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
-#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
-#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
-#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
-
-/* Used to decode ioctl numbers in drivers despite the leading underscore... */
-#define _IOC_DIR(nr)    \
- ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
-                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
-                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
-#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
-#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
-#define _IOC_SIZE(nr)   \
- ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
-                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
-
-/* ...and for the PCMCIA and sound. */
-#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
-#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
-#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
-#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
-#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
-
-#endif /* !(_SPARC64_IOCTL_H) */
diff --git a/include/asm-sparc64/ioctls.h b/include/asm-sparc64/ioctls.h
deleted file mode 100644
index 94d1b75e512b..000000000000
--- a/include/asm-sparc64/ioctls.h
+++ /dev/null
@@ -1,136 +0,0 @@
-#ifndef _ASM_SPARC64_IOCTLS_H
-#define _ASM_SPARC64_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* Big T */
-#define TCGETA		_IOR('T', 1, struct termio)
-#define TCSETA		_IOW('T', 2, struct termio)
-#define TCSETAW		_IOW('T', 3, struct termio)
-#define TCSETAF		_IOW('T', 4, struct termio)
-#define TCSBRK		_IO('T', 5)
-#define TCXONC		_IO('T', 6)
-#define TCFLSH		_IO('T', 7)
-#define TCGETS		_IOR('T', 8, struct termios)
-#define TCSETS		_IOW('T', 9, struct termios)
-#define TCSETSW		_IOW('T', 10, struct termios)
-#define TCSETSF		_IOW('T', 11, struct termios)
-#define TCGETS2		_IOR('T', 12, struct termios2)
-#define TCSETS2		_IOW('T', 13, struct termios2)
-#define TCSETSW2	_IOW('T', 14, struct termios2)
-#define TCSETSF2	_IOW('T', 15, struct termios2)
-
-/* Note that all the ioctls that are not available in Linux have a 
- * double underscore on the front to: a) avoid some programs to
- * think we support some ioctls under Linux (autoconfiguration stuff)
- */
-/* Little t */
-#define TIOCGETD	_IOR('t', 0, int)
-#define TIOCSETD	_IOW('t', 1, int)
-#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
-#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
-#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
-#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
-#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
-#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
-#define TIOCEXCL	_IO('t', 13)
-#define TIOCNXCL	_IO('t', 14)
-#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
-#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
-#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
-#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
-#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
-#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
-#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
-#define TIOCCONS	_IO('t', 36)
-#define TIOCGSOFTCAR	_IOR('t', 100, int)
-#define TIOCSSOFTCAR	_IOW('t', 101, int)
-#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
-#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
-#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
-#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
-#define TIOCMGET	_IOR('t', 106, int)
-#define TIOCMBIC	_IOW('t', 107, int)
-#define TIOCMBIS	_IOW('t', 108, int)
-#define TIOCMSET	_IOW('t', 109, int)
-#define TIOCSTART       _IO('t', 110)
-#define TIOCSTOP        _IO('t', 111)
-#define TIOCPKT		_IOW('t', 112, int)
-#define TIOCNOTTY	_IO('t', 113)
-#define TIOCSTI		_IOW('t', 114, char)
-#define TIOCOUTQ	_IOR('t', 115, int)
-#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
-#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
-/* 118 is the non-posix setpgrp tty ioctl */
-/* 119 is the non-posix getpgrp tty ioctl */
-#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
-#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
-#define TIOCCBRK        _IO('t', 122)
-#define TIOCSBRK        _IO('t', 123)
-#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
-#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
-#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
-#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
-#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
-#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
-#define TIOCSPGRP	_IOW('t', 130, int)
-#define TIOCGPGRP	_IOR('t', 131, int)
-#define TIOCSCTTY	_IO('t', 132)
-#define TIOCGSID	_IOR('t', 133, int)
-/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
-#define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
-#define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
-
-/* Little f */
-#define FIOCLEX		_IO('f', 1)
-#define FIONCLEX	_IO('f', 2)
-#define FIOASYNC	_IOW('f', 125, int)
-#define FIONBIO		_IOW('f', 126, int)
-#define FIONREAD	_IOR('f', 127, int)
-#define TIOCINQ		FIONREAD
-#define FIOQSIZE	_IOR('f', 128, loff_t)
-
-/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
- * someday.  This is completely bogus, I know...
- */
-#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
-#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
-
-/* Linux specific, no SunOS equivalent. */
-#define TIOCLINUX	0x541C
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TCSBRKP		0x5425
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-#define TIOCMIWAIT	0x545C /* Wait for change on serial input line(s) */
-#define TIOCGICOUNT	0x545D /* Read serial port inline interrupt counts */
-
-/* Kernel definitions */
-#ifdef __KERNEL__
-#define TIOCGETC __TIOCGETC
-#define TIOCGETP __TIOCGETP
-#define TIOCGLTC __TIOCGLTC
-#define TIOCSLTC __TIOCSLTC
-#define TIOCSETP __TIOCSETP
-#define TIOCSETN __TIOCSETN
-#define TIOCSETC __TIOCSETC
-#endif
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#endif /* !(_ASM_SPARC64_IOCTLS_H) */
diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h
deleted file mode 100644
index d7b9afcba08b..000000000000
--- a/include/asm-sparc64/iommu.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* iommu.h: Definitions for the sun5 IOMMU.
- *
- * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
- */
-#ifndef _SPARC64_IOMMU_H
-#define _SPARC64_IOMMU_H
-
-/* The format of an iopte in the page tables. */
-#define IOPTE_VALID   0x8000000000000000UL
-#define IOPTE_64K     0x2000000000000000UL
-#define IOPTE_STBUF   0x1000000000000000UL
-#define IOPTE_INTRA   0x0800000000000000UL
-#define IOPTE_CONTEXT 0x07ff800000000000UL
-#define IOPTE_PAGE    0x00007fffffffe000UL
-#define IOPTE_CACHE   0x0000000000000010UL
-#define IOPTE_WRITE   0x0000000000000002UL
-
-#define IOMMU_NUM_CTXS	4096
-
-struct iommu_arena {
-	unsigned long	*map;
-	unsigned int	hint;
-	unsigned int	limit;
-};
-
-struct iommu {
-	spinlock_t		lock;
-	struct iommu_arena	arena;
-	void			(*flush_all)(struct iommu *);
-	iopte_t			*page_table;
-	u32			page_table_map_base;
-	unsigned long		iommu_control;
-	unsigned long		iommu_tsbbase;
-	unsigned long		iommu_flush;
-	unsigned long		iommu_flushinv;
-	unsigned long		iommu_tags;
-	unsigned long		iommu_ctxflush;
-	unsigned long		write_complete_reg;
-	unsigned long		dummy_page;
-	unsigned long		dummy_page_pa;
-	unsigned long		ctx_lowest_free;
-	DECLARE_BITMAP(ctx_bitmap, IOMMU_NUM_CTXS);
-	u32			dma_addr_mask;
-};
-
-struct strbuf {
-	int			strbuf_enabled;
-	unsigned long		strbuf_control;
-	unsigned long		strbuf_pflush;
-	unsigned long		strbuf_fsync;
-	unsigned long		strbuf_ctxflush;
-	unsigned long		strbuf_ctxmatch_base;
-	unsigned long		strbuf_flushflag_pa;
-	volatile unsigned long *strbuf_flushflag;
-	volatile unsigned long	__flushflag_buf[(64+(64-1)) / sizeof(long)];
-};
-
-extern int iommu_table_init(struct iommu *iommu, int tsbsize,
-			    u32 dma_offset, u32 dma_addr_mask,
-			    int numa_node);
-
-#endif /* !(_SPARC64_IOMMU_H) */
diff --git a/include/asm-sparc64/ipcbuf.h b/include/asm-sparc64/ipcbuf.h
deleted file mode 100644
index 9c5bf1bc423f..000000000000
--- a/include/asm-sparc64/ipcbuf.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _SPARC64_IPCBUF_H
-#define _SPARC64_IPCBUF_H
-
-/* 
- * The ipc64_perm structure for sparc64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit seq
- * - 2 miscellaneous 64-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode; 
-	unsigned short	__pad1;
-	unsigned short	seq;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _SPARC64_IPCBUF_H */
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
deleted file mode 100644
index 0bb9bf531745..000000000000
--- a/include/asm-sparc64/irq.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* irq.h: IRQ registers on the 64-bit Sparc.
- *
- * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
- */
-
-#ifndef _SPARC64_IRQ_H
-#define _SPARC64_IRQ_H
-
-#include <linux/linkage.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <asm/pil.h>
-#include <asm/ptrace.h>
-
-/* IMAP/ICLR register defines */
-#define IMAP_VALID		0x80000000UL	/* IRQ Enabled		*/
-#define IMAP_TID_UPA		0x7c000000UL	/* UPA TargetID		*/
-#define IMAP_TID_JBUS		0x7c000000UL	/* JBUS TargetID	*/
-#define IMAP_TID_SHIFT		26
-#define IMAP_AID_SAFARI		0x7c000000UL	/* Safari AgentID	*/
-#define IMAP_AID_SHIFT		26
-#define IMAP_NID_SAFARI		0x03e00000UL	/* Safari NodeID	*/
-#define IMAP_NID_SHIFT		21
-#define IMAP_IGN		0x000007c0UL	/* IRQ Group Number	*/
-#define IMAP_INO		0x0000003fUL	/* IRQ Number		*/
-#define IMAP_INR		0x000007ffUL	/* Full interrupt number*/
-
-#define ICLR_IDLE		0x00000000UL	/* Idle state		*/
-#define ICLR_TRANSMIT		0x00000001UL	/* Transmit state	*/
-#define ICLR_PENDING		0x00000003UL	/* Pending state	*/
-
-/* The largest number of unique interrupt sources we support.
- * If this needs to ever be larger than 255, you need to change
- * the type of ino_bucket->virt_irq as appropriate.
- *
- * ino_bucket->virt_irq allocation is made during {sun4v_,}build_irq().
- */
-#define NR_IRQS    255
-
-extern void irq_install_pre_handler(int virt_irq,
-				    void (*func)(unsigned int, void *, void *),
-				    void *arg1, void *arg2);
-#define irq_canonicalize(irq)	(irq)
-extern unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap);
-extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino);
-extern unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino);
-extern unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p,
-				    unsigned int msi_devino_start,
-				    unsigned int msi_devino_end);
-extern void sun4v_destroy_msi(unsigned int virt_irq);
-extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
-				    unsigned int msi_devino_start,
-				    unsigned int msi_devino_end,
-				    unsigned long imap_base,
-				    unsigned long iclr_base);
-extern void sun4u_destroy_msi(unsigned int virt_irq);
-extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
-
-extern unsigned char virt_irq_alloc(unsigned int dev_handle,
-				    unsigned int dev_ino);
-#ifdef CONFIG_PCI_MSI
-extern void virt_irq_free(unsigned int virt_irq);
-#endif
-
-extern void __init init_IRQ(void);
-extern void fixup_irqs(void);
-
-static inline void set_softint(unsigned long bits)
-{
-	__asm__ __volatile__("wr	%0, 0x0, %%set_softint"
-			     : /* No outputs */
-			     : "r" (bits));
-}
-
-static inline void clear_softint(unsigned long bits)
-{
-	__asm__ __volatile__("wr	%0, 0x0, %%clear_softint"
-			     : /* No outputs */
-			     : "r" (bits));
-}
-
-static inline unsigned long get_softint(void)
-{
-	unsigned long retval;
-
-	__asm__ __volatile__("rd	%%softint, %0"
-			     : "=r" (retval));
-	return retval;
-}
-
-#endif
diff --git a/include/asm-sparc64/irq_regs.h b/include/asm-sparc64/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-sparc64/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-sparc64/irqflags.h b/include/asm-sparc64/irqflags.h
deleted file mode 100644
index 024fc54d0682..000000000000
--- a/include/asm-sparc64/irqflags.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * include/asm-sparc64/irqflags.h
- *
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__(
-		"rdpr	%%pil, %0"
-		: "=r" (flags)
-	);
-
-	return flags;
-}
-
-#define raw_local_save_flags(flags) \
-		do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	__asm__ __volatile__(
-		"wrpr	%0, %%pil"
-		: /* no output */
-		: "r" (flags)
-		: "memory"
-	);
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	__asm__ __volatile__(
-		"wrpr	15, %%pil"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory"
-	);
-}
-
-static inline void raw_local_irq_enable(void)
-{
-	__asm__ __volatile__(
-		"wrpr	0, %%pil"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory"
-	);
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags > 0);
-}
-
-static inline int raw_irqs_disabled(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * For spinlocks, etc:
- */
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_disable();
-
-	return flags;
-}
-
-#define raw_local_irq_save(flags) \
-		do { (flags) = __raw_local_irq_save(); } while (0)
-
-#endif /* (__ASSEMBLY__) */
-
-#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/include/asm-sparc64/kdebug.h b/include/asm-sparc64/kdebug.h
deleted file mode 100644
index f905b773235a..000000000000
--- a/include/asm-sparc64/kdebug.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _SPARC64_KDEBUG_H
-#define _SPARC64_KDEBUG_H
-
-struct pt_regs;
-
-extern void bad_trap(struct pt_regs *, long);
-
-/* Grossly misnamed. */
-enum die_val {
-	DIE_OOPS = 1,
-	DIE_DEBUG,	/* ta 0x70 */
-	DIE_DEBUG_2,	/* ta 0x71 */
-	DIE_DIE,
-	DIE_TRAP,
-	DIE_TRAP_TL1,
-	DIE_CALL,
-};
-
-#endif
diff --git a/include/asm-sparc64/kgdb.h b/include/asm-sparc64/kgdb.h
deleted file mode 100644
index aa6532fd3a13..000000000000
--- a/include/asm-sparc64/kgdb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kgdb.h>
diff --git a/include/asm-sparc64/kmap_types.h b/include/asm-sparc64/kmap_types.h
deleted file mode 100644
index 34c1d3d9a3b0..000000000000
--- a/include/asm-sparc64/kmap_types.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-/* Dummy header just to define km_type.  None of this
- * is actually used on sparc64.  -DaveM
- */
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_TYPE_NR
-};
-
-#endif
diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h
deleted file mode 100644
index 5879d71afdaa..000000000000
--- a/include/asm-sparc64/kprobes.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _SPARC64_KPROBES_H
-#define _SPARC64_KPROBES_H
-
-#include <linux/types.h>
-#include <linux/percpu.h>
-
-typedef u32 kprobe_opcode_t;
-
-#define BREAKPOINT_INSTRUCTION   0x91d02070 /* ta 0x70 */
-#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
-#define MAX_INSN_SIZE 2
-
-#define kretprobe_blacklist_size 0
-
-#define arch_remove_kprobe(p)	do {} while (0)
-
-#define flush_insn_slot(p)		\
-do { 	flushi(&(p)->ainsn.insn[0]);	\
-	flushi(&(p)->ainsn.insn[1]);	\
-} while (0)
-
-void kretprobe_trampoline(void);
-
-/* Architecture specific copy of original instruction*/
-struct arch_specific_insn {
-	/* copy of the original instruction */
-	kprobe_opcode_t insn[MAX_INSN_SIZE];
-};
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned long status;
-	unsigned long orig_tnpc;
-	unsigned long orig_tstate_pil;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-	unsigned long kprobe_status;
-	unsigned long kprobe_orig_tnpc;
-	unsigned long kprobe_orig_tstate_pil;
-	struct pt_regs jprobe_saved_regs;
-	struct prev_kprobe prev_kprobe;
-};
-
-extern int kprobe_exceptions_notify(struct notifier_block *self,
-				    unsigned long val, void *data);
-extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
-#endif /* _SPARC64_KPROBES_H */
diff --git a/include/asm-sparc64/kvm.h b/include/asm-sparc64/kvm.h
deleted file mode 100644
index 380537a77bf9..000000000000
--- a/include/asm-sparc64/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_SPARC64_H
-#define __LINUX_KVM_SPARC64_H
-
-/* sparc64 does not support KVM */
-
-#endif
diff --git a/include/asm-sparc64/ldc.h b/include/asm-sparc64/ldc.h
deleted file mode 100644
index bdb524a7b814..000000000000
--- a/include/asm-sparc64/ldc.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef _SPARC64_LDC_H
-#define _SPARC64_LDC_H
-
-#include <asm/hypervisor.h>
-
-extern int ldom_domaining_enabled;
-extern void ldom_set_var(const char *var, const char *value);
-extern void ldom_reboot(const char *boot_command);
-extern void ldom_power_off(void);
-
-/* The event handler will be evoked when link state changes
- * or data becomes available on the receive side.
- *
- * For non-RAW links, if the LDC_EVENT_RESET event arrives the
- * driver should reset all of it's internal state and reinvoke
- * ldc_connect() to try and bring the link up again.
- *
- * For RAW links, ldc_connect() is not used.  Instead the driver
- * just waits for the LDC_EVENT_UP event.
- */
-struct ldc_channel_config {
-	void (*event)(void *arg, int event);
-
-	u32			mtu;
-	unsigned int		rx_irq;
-	unsigned int		tx_irq;
-	u8			mode;
-#define LDC_MODE_RAW		0x00
-#define LDC_MODE_UNRELIABLE	0x01
-#define LDC_MODE_RESERVED	0x02
-#define LDC_MODE_STREAM		0x03
-
-	u8			debug;
-#define LDC_DEBUG_HS		0x01
-#define LDC_DEBUG_STATE		0x02
-#define LDC_DEBUG_RX		0x04
-#define LDC_DEBUG_TX		0x08
-#define LDC_DEBUG_DATA		0x10
-};
-
-#define LDC_EVENT_RESET		0x01
-#define LDC_EVENT_UP		0x02
-#define LDC_EVENT_DATA_READY	0x04
-
-#define LDC_STATE_INVALID	0x00
-#define LDC_STATE_INIT		0x01
-#define LDC_STATE_BOUND		0x02
-#define LDC_STATE_READY		0x03
-#define LDC_STATE_CONNECTED	0x04
-
-struct ldc_channel;
-
-/* Allocate state for a channel.  */
-extern struct ldc_channel *ldc_alloc(unsigned long id,
-				     const struct ldc_channel_config *cfgp,
-				     void *event_arg);
-
-/* Shut down and free state for a channel.  */
-extern void ldc_free(struct ldc_channel *lp);
-
-/* Register TX and RX queues of the link with the hypervisor.  */
-extern int ldc_bind(struct ldc_channel *lp, const char *name);
-
-/* For non-RAW protocols we need to complete a handshake before
- * communication can proceed.  ldc_connect() does that, if the
- * handshake completes successfully, an LDC_EVENT_UP event will
- * be sent up to the driver.
- */
-extern int ldc_connect(struct ldc_channel *lp);
-extern int ldc_disconnect(struct ldc_channel *lp);
-
-extern int ldc_state(struct ldc_channel *lp);
-
-/* Read and write operations.  Only valid when the link is up.  */
-extern int ldc_write(struct ldc_channel *lp, const void *buf,
-		     unsigned int size);
-extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size);
-
-#define LDC_MAP_SHADOW	0x01
-#define LDC_MAP_DIRECT	0x02
-#define LDC_MAP_IO	0x04
-#define LDC_MAP_R	0x08
-#define LDC_MAP_W	0x10
-#define LDC_MAP_X	0x20
-#define LDC_MAP_RW	(LDC_MAP_R | LDC_MAP_W)
-#define LDC_MAP_RWX	(LDC_MAP_R | LDC_MAP_W | LDC_MAP_X)
-#define LDC_MAP_ALL	0x03f
-
-struct ldc_trans_cookie {
-	u64			cookie_addr;
-	u64			cookie_size;
-};
-
-struct scatterlist;
-extern int ldc_map_sg(struct ldc_channel *lp,
-		      struct scatterlist *sg, int num_sg,
-		      struct ldc_trans_cookie *cookies, int ncookies,
-		      unsigned int map_perm);
-
-extern int ldc_map_single(struct ldc_channel *lp,
-			  void *buf, unsigned int len,
-			  struct ldc_trans_cookie *cookies, int ncookies,
-			  unsigned int map_perm);
-
-extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies,
-		      int ncookies);
-
-extern int ldc_copy(struct ldc_channel *lp, int copy_dir,
-		    void *buf, unsigned int len, unsigned long offset,
-		    struct ldc_trans_cookie *cookies, int ncookies);
-
-static inline int ldc_get_dring_entry(struct ldc_channel *lp,
-				      void *buf, unsigned int len,
-				      unsigned long offset,
-				      struct ldc_trans_cookie *cookies,
-				      int ncookies)
-{
-	return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies);
-}
-
-static inline int ldc_put_dring_entry(struct ldc_channel *lp,
-				      void *buf, unsigned int len,
-				      unsigned long offset,
-				      struct ldc_trans_cookie *cookies,
-				      int ncookies)
-{
-	return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies);
-}
-
-extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len,
-				 struct ldc_trans_cookie *cookies,
-				 int *ncookies, unsigned int map_perm);
-
-extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf,
-			       unsigned int len,
-			       struct ldc_trans_cookie *cookies, int ncookies);
-
-#endif /* _SPARC64_LDC_H */
diff --git a/include/asm-sparc64/linkage.h b/include/asm-sparc64/linkage.h
deleted file mode 100644
index 291c2d01c44f..000000000000
--- a/include/asm-sparc64/linkage.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-/* Nothing to see here... */
-
-#endif
diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h
deleted file mode 100644
index 6a352cbcf520..000000000000
--- a/include/asm-sparc64/lmb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _SPARC64_LMB_H
-#define _SPARC64_LMB_H
-
-#include <asm/oplib.h>
-
-#define LMB_DBG(fmt...) prom_printf(fmt)
-
-#define LMB_REAL_LIMIT	0
-
-#endif /* !(_SPARC64_LMB_H) */
diff --git a/include/asm-sparc64/local.h b/include/asm-sparc64/local.h
deleted file mode 100644
index c11c530f74d0..000000000000
--- a/include/asm-sparc64/local.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local.h>
diff --git a/include/asm-sparc64/lsu.h b/include/asm-sparc64/lsu.h
deleted file mode 100644
index 7190f8de90a0..000000000000
--- a/include/asm-sparc64/lsu.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _SPARC64_LSU_H
-#define _SPARC64_LSU_H
-
-#include <linux/const.h>
-
-/* LSU Control Register */
-#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
-#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
-#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
-#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
-#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
-#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
-#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables.     */
-#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable.         */
-#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable.  */
-#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable.       */
-#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
-
-#endif /* !(_SPARC64_LSU_H) */
diff --git a/include/asm-sparc64/mc146818rtc.h b/include/asm-sparc64/mc146818rtc.h
deleted file mode 100644
index e9c0fcc25c6f..000000000000
--- a/include/asm-sparc64/mc146818rtc.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef __ASM_SPARC64_MC146818RTC_H
-#define __ASM_SPARC64_MC146818RTC_H
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#ifdef CONFIG_PCI
-extern unsigned long ds1287_regs;
-#else
-#define ds1287_regs (0UL)
-#endif
-#define RTC_PORT(x)	(ds1287_regs + (x))
-#define RTC_ALWAYS_BCD	0
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#define RTC_IRQ 8
-
-#endif /* __ASM_SPARC64_MC146818RTC_H */
diff --git a/include/asm-sparc64/mdesc.h b/include/asm-sparc64/mdesc.h
deleted file mode 100644
index 1acc7272e537..000000000000
--- a/include/asm-sparc64/mdesc.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _SPARC64_MDESC_H
-#define _SPARC64_MDESC_H
-
-#include <linux/types.h>
-#include <linux/cpumask.h>
-#include <asm/prom.h>
-
-struct mdesc_handle;
-
-/* Machine description operations are to be surrounded by grab and
- * release calls.  The mdesc_handle returned from the grab is
- * the first argument to all of the operational calls that work
- * on mdescs.
- */
-extern struct mdesc_handle *mdesc_grab(void);
-extern void mdesc_release(struct mdesc_handle *);
-
-#define MDESC_NODE_NULL		(~(u64)0)
-
-extern u64 mdesc_node_by_name(struct mdesc_handle *handle,
-			      u64 from_node, const char *name);
-#define mdesc_for_each_node_by_name(__hdl, __node, __name) \
-	for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \
-	     (__node) != MDESC_NODE_NULL; \
-	     __node = mdesc_node_by_name(__hdl, __node, __name))
-
-/* Access to property values returned from mdesc_get_property() are
- * only valid inside of a mdesc_grab()/mdesc_release() sequence.
- * Once mdesc_release() is called, the memory backed up by these
- * pointers may reference freed up memory.
- *
- * Therefore callers must make copies of any property values
- * they need.
- *
- * These same rules apply to mdesc_node_name().
- */
-extern const void *mdesc_get_property(struct mdesc_handle *handle,
-				      u64 node, const char *name, int *lenp);
-extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node);
-
-/* MD arc iteration, the standard sequence is:
- *
- *	unsigned long arc;
- *	mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) {
- *		unsigned long target = mdesc_arc_target(handle, arc);
- *		...
- *	}
- */
-
-#define MDESC_ARC_TYPE_FWD	"fwd"
-#define MDESC_ARC_TYPE_BACK	"back"
-
-extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from,
-			  const char *arc_type);
-#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \
-	for (__arc = mdesc_next_arc(__hdl, __node, __type); \
-	     (__arc) != MDESC_NODE_NULL; \
-	     __arc = mdesc_next_arc(__hdl, __arc, __type))
-
-extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc);
-
-extern void mdesc_update(void);
-
-struct mdesc_notifier_client {
-	void (*add)(struct mdesc_handle *handle, u64 node);
-	void (*remove)(struct mdesc_handle *handle, u64 node);
-
-	const char			*node_name;
-	struct mdesc_notifier_client	*next;
-};
-
-extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
-
-extern void mdesc_fill_in_cpu_data(cpumask_t mask);
-
-extern void sun4v_mdesc_init(void);
-
-#endif
diff --git a/include/asm-sparc64/mman.h b/include/asm-sparc64/mman.h
deleted file mode 100644
index d2ae67cd1bdc..000000000000
--- a/include/asm-sparc64/mman.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __SPARC64_MMAN_H__
-#define __SPARC64_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-/* SunOS'ified... */
-
-#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
-#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
-#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
-#define MAP_LOCKED      0x100           /* lock the mapping */
-#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
-
-#define MAP_GROWSDOWN	0x0200		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-
-#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
-#define MCL_FUTURE      0x4000          /* lock all additions to address space */
-
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#define arch_mmap_check(addr,len,flags)	sparc64_mmap_check(addr,len)
-int sparc64_mmap_check(unsigned long addr, unsigned long len);
-#endif
-#endif
-
-#endif /* __SPARC64_MMAN_H__ */
diff --git a/include/asm-sparc64/mmu.h b/include/asm-sparc64/mmu.h
deleted file mode 100644
index 8abc58f0f9d7..000000000000
--- a/include/asm-sparc64/mmu.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef __MMU_H
-#define __MMU_H
-
-#include <linux/const.h>
-#include <asm/page.h>
-#include <asm/hypervisor.h>
-
-#define CTX_NR_BITS		13
-
-#define TAG_CONTEXT_BITS	((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL))
-
-/* UltraSPARC-III+ and later have a feature whereby you can
- * select what page size the various Data-TLB instances in the
- * chip.  In order to gracefully support this, we put the version
- * field in a spot outside of the areas of the context register
- * where this parameter is specified.
- */
-#define CTX_VERSION_SHIFT	22
-#define CTX_VERSION_MASK	((~0UL) << CTX_VERSION_SHIFT)
-
-#define CTX_PGSZ_8KB		_AC(0x0,UL)
-#define CTX_PGSZ_64KB		_AC(0x1,UL)
-#define CTX_PGSZ_512KB		_AC(0x2,UL)
-#define CTX_PGSZ_4MB		_AC(0x3,UL)
-#define CTX_PGSZ_BITS		_AC(0x7,UL)
-#define CTX_PGSZ0_NUC_SHIFT	61
-#define CTX_PGSZ1_NUC_SHIFT	58
-#define CTX_PGSZ0_SHIFT		16
-#define CTX_PGSZ1_SHIFT		19
-#define CTX_PGSZ_MASK		((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \
-				 (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT))
-
-#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
-#define CTX_PGSZ_BASE	CTX_PGSZ_8KB
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
-#define CTX_PGSZ_BASE	CTX_PGSZ_64KB
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
-#define CTX_PGSZ_BASE	CTX_PGSZ_512KB
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
-#define CTX_PGSZ_BASE	CTX_PGSZ_4MB
-#else
-#error No page size specified in kernel configuration
-#endif
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define CTX_PGSZ_HUGE		CTX_PGSZ_4MB
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
-#define CTX_PGSZ_HUGE		CTX_PGSZ_512KB
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define CTX_PGSZ_HUGE		CTX_PGSZ_64KB
-#endif
-
-#define CTX_PGSZ_KERN	CTX_PGSZ_4MB
-
-/* Thus, when running on UltraSPARC-III+ and later, we use the following
- * PRIMARY_CONTEXT register values for the kernel context.
- */
-#define CTX_CHEETAH_PLUS_NUC \
-	((CTX_PGSZ_KERN << CTX_PGSZ0_NUC_SHIFT) | \
-	 (CTX_PGSZ_BASE << CTX_PGSZ1_NUC_SHIFT))
-
-#define CTX_CHEETAH_PLUS_CTX0 \
-	((CTX_PGSZ_KERN << CTX_PGSZ0_SHIFT) | \
-	 (CTX_PGSZ_BASE << CTX_PGSZ1_SHIFT))
-
-/* If you want "the TLB context number" use CTX_NR_MASK.  If you
- * want "the bits I program into the context registers" use
- * CTX_HW_MASK.
- */
-#define CTX_NR_MASK		TAG_CONTEXT_BITS
-#define CTX_HW_MASK		(CTX_NR_MASK | CTX_PGSZ_MASK)
-
-#define CTX_FIRST_VERSION	((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
-#define CTX_VALID(__ctx)	\
-	 (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
-#define CTX_HWBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
-#define CTX_NRBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_NR_MASK)
-
-#ifndef __ASSEMBLY__
-
-#define TSB_ENTRY_ALIGNMENT	16
-
-struct tsb {
-	unsigned long tag;
-	unsigned long pte;
-} __attribute__((aligned(TSB_ENTRY_ALIGNMENT)));
-
-extern void __tsb_insert(unsigned long ent, unsigned long tag, unsigned long pte);
-extern void tsb_flush(unsigned long ent, unsigned long tag);
-extern void tsb_init(struct tsb *tsb, unsigned long size);
-
-struct tsb_config {
-	struct tsb		*tsb;
-	unsigned long		tsb_rss_limit;
-	unsigned long		tsb_nentries;
-	unsigned long		tsb_reg_val;
-	unsigned long		tsb_map_vaddr;
-	unsigned long		tsb_map_pte;
-};
-
-#define MM_TSB_BASE	0
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define MM_TSB_HUGE	1
-#define MM_NUM_TSBS	2
-#else
-#define MM_NUM_TSBS	1
-#endif
-
-typedef struct {
-	spinlock_t		lock;
-	unsigned long		sparc64_ctx_val;
-	unsigned long		huge_pte_count;
-	struct tsb_config	tsb_block[MM_NUM_TSBS];
-	struct hv_tsb_descr	tsb_descr[MM_NUM_TSBS];
-} mm_context_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#define TSB_CONFIG_TSB		0x00
-#define TSB_CONFIG_RSS_LIMIT	0x08
-#define TSB_CONFIG_NENTRIES	0x10
-#define TSB_CONFIG_REG_VAL	0x18
-#define TSB_CONFIG_MAP_VADDR	0x20
-#define TSB_CONFIG_MAP_PTE	0x28
-
-#endif /* __MMU_H */
diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h
deleted file mode 100644
index 5693ab482606..000000000000
--- a/include/asm-sparc64/mmu_context.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef __SPARC64_MMU_CONTEXT_H
-#define __SPARC64_MMU_CONTEXT_H
-
-/* Derived heavily from Linus's Alpha/AXP ASN code... */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/spitfire.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-extern spinlock_t ctx_alloc_lock;
-extern unsigned long tlb_context_cache;
-extern unsigned long mmu_context_bmap[];
-
-extern void get_new_mmu_context(struct mm_struct *mm);
-#ifdef CONFIG_SMP
-extern void smp_new_mmu_context_version(void);
-#else
-#define smp_new_mmu_context_version() do { } while (0)
-#endif
-
-extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-extern void destroy_context(struct mm_struct *mm);
-
-extern void __tsb_context_switch(unsigned long pgd_pa,
-				 struct tsb_config *tsb_base,
-				 struct tsb_config *tsb_huge,
-				 unsigned long tsb_descr_pa);
-
-static inline void tsb_context_switch(struct mm_struct *mm)
-{
-	__tsb_context_switch(__pa(mm->pgd),
-			     &mm->context.tsb_block[0],
-#ifdef CONFIG_HUGETLB_PAGE
-			     (mm->context.tsb_block[1].tsb ?
-			      &mm->context.tsb_block[1] :
-			      NULL)
-#else
-			     NULL
-#endif
-			     , __pa(&mm->context.tsb_descr[0]));
-}
-
-extern void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long mm_rss);
-#ifdef CONFIG_SMP
-extern void smp_tsb_sync(struct mm_struct *mm);
-#else
-#define smp_tsb_sync(__mm) do { } while (0)
-#endif
-
-/* Set MMU context in the actual hardware. */
-#define load_secondary_context(__mm) \
-	__asm__ __volatile__( \
-	"\n661:	stxa		%0, [%1] %2\n" \
-	"	.section	.sun4v_1insn_patch, \"ax\"\n" \
-	"	.word		661b\n" \
-	"	stxa		%0, [%1] %3\n" \
-	"	.previous\n" \
-	"	flush		%%g6\n" \
-	: /* No outputs */ \
-	: "r" (CTX_HWBITS((__mm)->context)), \
-	  "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU), "i" (ASI_MMU))
-
-extern void __flush_tlb_mm(unsigned long, unsigned long);
-
-/* Switch the current MM context.  Interrupts are disabled.  */
-static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
-{
-	unsigned long ctx_valid, flags;
-	int cpu;
-
-	if (unlikely(mm == &init_mm))
-		return;
-
-	spin_lock_irqsave(&mm->context.lock, flags);
-	ctx_valid = CTX_VALID(mm->context);
-	if (!ctx_valid)
-		get_new_mmu_context(mm);
-
-	/* We have to be extremely careful here or else we will miss
-	 * a TSB grow if we switch back and forth between a kernel
-	 * thread and an address space which has it's TSB size increased
-	 * on another processor.
-	 *
-	 * It is possible to play some games in order to optimize the
-	 * switch, but the safest thing to do is to unconditionally
-	 * perform the secondary context load and the TSB context switch.
-	 *
-	 * For reference the bad case is, for address space "A":
-	 *
-	 *		CPU 0			CPU 1
-	 *	run address space A
-	 *	set cpu0's bits in cpu_vm_mask
-	 *	switch to kernel thread, borrow
-	 *	address space A via entry_lazy_tlb
-	 *					run address space A
-	 *					set cpu1's bit in cpu_vm_mask
-	 *					flush_tlb_pending()
-	 *					reset cpu_vm_mask to just cpu1
-	 *					TSB grow
-	 *	run address space A
-	 *	context was valid, so skip
-	 *	TSB context switch
-	 *
-	 * At that point cpu0 continues to use a stale TSB, the one from
-	 * before the TSB grow performed on cpu1.  cpu1 did not cross-call
-	 * cpu0 to update it's TSB because at that point the cpu_vm_mask
-	 * only had cpu1 set in it.
-	 */
-	load_secondary_context(mm);
-	tsb_context_switch(mm);
-
-	/* Any time a processor runs a context on an address space
-	 * for the first time, we must flush that context out of the
-	 * local TLB.
-	 */
-	cpu = smp_processor_id();
-	if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
-		cpu_set(cpu, mm->cpu_vm_mask);
-		__flush_tlb_mm(CTX_HWBITS(mm->context),
-			       SECONDARY_CONTEXT);
-	}
-	spin_unlock_irqrestore(&mm->context.lock, flags);
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-/* Activate a new MM instance for the current task. */
-static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
-{
-	unsigned long flags;
-	int cpu;
-
-	spin_lock_irqsave(&mm->context.lock, flags);
-	if (!CTX_VALID(mm->context))
-		get_new_mmu_context(mm);
-	cpu = smp_processor_id();
-	if (!cpu_isset(cpu, mm->cpu_vm_mask))
-		cpu_set(cpu, mm->cpu_vm_mask);
-
-	load_secondary_context(mm);
-	__flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
-	tsb_context_switch(mm);
-	spin_unlock_irqrestore(&mm->context.lock, flags);
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC64_MMU_CONTEXT_H) */
diff --git a/include/asm-sparc64/mmzone.h b/include/asm-sparc64/mmzone.h
deleted file mode 100644
index ebf5986c12ed..000000000000
--- a/include/asm-sparc64/mmzone.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _SPARC64_MMZONE_H
-#define _SPARC64_MMZONE_H
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-
-extern struct pglist_data *node_data[];
-
-#define NODE_DATA(nid)		(node_data[nid])
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
-
-extern int numa_cpu_lookup_table[];
-extern cpumask_t numa_cpumask_lookup_table[];
-
-#endif /* CONFIG_NEED_MULTIPLE_NODES */
-
-#endif /* _SPARC64_MMZONE_H */
diff --git a/include/asm-sparc64/module.h b/include/asm-sparc64/module.h
deleted file mode 100644
index 3d77ba465783..000000000000
--- a/include/asm-sparc64/module.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ASM_SPARC64_MODULE_H
-#define _ASM_SPARC64_MODULE_H
-struct mod_arch_specific { };
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Sym Elf64_Sym
-#define Elf_Ehdr Elf64_Ehdr
-#endif /* _ASM_SPARC64_MODULE_H */
diff --git a/include/asm-sparc64/mostek.h b/include/asm-sparc64/mostek.h
deleted file mode 100644
index c5652de2ace2..000000000000
--- a/include/asm-sparc64/mostek.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* mostek.h:  Describes the various Mostek time of day clock registers.
- *
- * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _SPARC64_MOSTEK_H
-#define _SPARC64_MOSTEK_H
-
-#include <asm/idprom.h>
-
-/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
- *
- *                             Data
- * Address                                                 Function
- *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
- *   7ff  -     -     -     -    -     -     -     -       Year 00-99
- *   7fe  0     0     0     -    -     -     -     -      Month 01-12
- *   7fd  0     0     -     -    -     -     -     -       Date 01-31
- *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
- *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
- *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
- *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
- *   7f8  W     R     S     -    -     -     -     -    Control
- *
- *   * ST is STOP BIT
- *   * W is WRITE BIT
- *   * R is READ BIT
- *   * S is SIGN BIT
- *   * FT is FREQ TEST BIT
- *   * KS is KICK START BIT
- */
-
-/* The Mostek 48t02 real time clock and NVRAM chip. The registers
- * other than the control register are in binary coded decimal. Some
- * control bits also live outside the control register.
- *
- * We now deal with physical addresses for I/O to the chip. -DaveM
- */
-static inline u8 mostek_read(void __iomem *addr)
-{
-	u8 ret;
-
-	__asm__ __volatile__("lduba	[%1] %2, %0"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-	return ret;
-}
-
-static inline void mostek_write(void __iomem *addr, u8 val)
-{
-	__asm__ __volatile__("stba	%0, [%1] %2"
-			     : /* no outputs */
-			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-#define MOSTEK_EEPROM		0x0000UL
-#define MOSTEK_IDPROM		0x07d8UL
-#define MOSTEK_CREG		0x07f8UL
-#define MOSTEK_SEC		0x07f9UL
-#define MOSTEK_MIN		0x07faUL
-#define MOSTEK_HOUR		0x07fbUL
-#define MOSTEK_DOW		0x07fcUL
-#define MOSTEK_DOM		0x07fdUL
-#define MOSTEK_MONTH		0x07feUL
-#define MOSTEK_YEAR		0x07ffUL
-
-extern spinlock_t mostek_lock;
-extern void __iomem *mstk48t02_regs;
-
-/* Control register values. */
-#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
-#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
-#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
-
-/* Control bits that live in the other registers. */
-#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
-#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
-#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
-
-#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
-#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
-
-/* Masks that define how much space each value takes up. */
-#define	MSTK_SEC_MASK	0x7f
-#define	MSTK_MIN_MASK	0x7f
-#define	MSTK_HOUR_MASK	0x3f
-#define	MSTK_DOW_MASK	0x07
-#define	MSTK_DOM_MASK	0x3f
-#define	MSTK_MONTH_MASK	0x1f
-#define	MSTK_YEAR_MASK	0xffU
-
-/* Binary coded decimal conversion macros. */
-#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
-#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
-
-/* Generic register set and get macros for internal use. */
-#define MSTK_GET(regs,name)	\
-	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
-#define MSTK_SET(regs,name,value) \
-do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
-	__val &= ~(MSTK_ ## name ## _MASK); \
-	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
-		  (MSTK_ ## name ## _MASK)); \
-	mostek_write(regs + MOSTEK_ ## name, __val); \
-} while(0)
-
-/* Macros to make register access easier on our fingers. These give you
- * the decimal value of the register requested if applicable. You pass
- * the a pointer to a 'struct mostek48t02'.
- */
-#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
-#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
-#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
-#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
-#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
-#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
-#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
-#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
-
-#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
-#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
-#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
-#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
-#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
-#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
-#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
-
-
-/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
- * same (basically) layout of the 48t02 chip except for the extra
- * NVRAM on board (8 KB against the 48t02's 2 KB).
- */
-#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
- * clock chip definitions around just in case.
- */
-#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
-#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
-
-#endif /* !(_SPARC64_MOSTEK_H) */
diff --git a/include/asm-sparc64/msgbuf.h b/include/asm-sparc64/msgbuf.h
deleted file mode 100644
index 55c101bd0e7d..000000000000
--- a/include/asm-sparc64/msgbuf.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _SPARC64_MSGBUF_H
-#define _SPARC64_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for sparc64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused1;
-	unsigned long  __unused2;
-};
-
-#endif /* _SPARC64_MSGBUF_H */
diff --git a/include/asm-sparc64/mutex.h b/include/asm-sparc64/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-sparc64/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-sparc64/namei.h b/include/asm-sparc64/namei.h
deleted file mode 100644
index cbc1b4c06891..000000000000
--- a/include/asm-sparc64/namei.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-sparc64/namei.h
- *
- * Routines to handle famous /usr/gnemul/s*.
- * Included from linux/fs/namei.c
- */
-
-#ifndef __SPARC64_NAMEI_H
-#define __SPARC64_NAMEI_H
-
-#define __emul_prefix() NULL
-
-#endif /* __SPARC64_NAMEI_H */
diff --git a/include/asm-sparc64/ns87303.h b/include/asm-sparc64/ns87303.h
deleted file mode 100644
index 686defe6aaa0..000000000000
--- a/include/asm-sparc64/ns87303.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* ns87303.h: Configuration Register Description for the
- *            National Semiconductor PC87303 (SuperIO).
- *
- * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
- */
-
-#ifndef _SPARC_NS87303_H
-#define _SPARC_NS87303_H 1
-
-/*
- * Control Register Index Values
- */
-#define FER	0x00
-#define FAR	0x01
-#define PTR	0x02
-#define FCR	0x03
-#define PCR	0x04
-#define KRR	0x05
-#define PMC	0x06
-#define TUP	0x07
-#define SID	0x08
-#define ASC	0x09
-#define CS0CF0	0x0a
-#define CS0CF1	0x0b
-#define CS1CF0	0x0c
-#define CS1CF1	0x0d
-
-/* Function Enable Register (FER) bits */
-#define FER_EDM		0x10	/* Encoded Drive and Motor pin information   */
-
-/* Function Address Register (FAR) bits */
-#define FAR_LPT_MASK	0x03
-#define FAR_LPTB	0x00
-#define FAR_LPTA	0x01
-#define FAR_LPTC	0x02
-
-/* Power and Test Register (PTR) bits */
-#define PTR_LPTB_IRQ7	0x08
-#define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
-#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
-				/*               of the parallel port	     */
-
-/* Function Control Register (FCR) bits */
-#define FCR_LDE		0x10	/* Logical Drive Exchange                    */
-#define FCR_ZWS_ENA	0x20	/* Enable short host read/write in ECP/EPP   */
-
-/* Printer Control Register (PCR) bits */
-#define PCR_EPP_ENABLE	0x01
-#define PCR_EPP_IEEE	0x02	/* Enable EPP Version 1.9 (IEEE 1284)        */
-#define PCR_ECP_ENABLE	0x04
-#define PCR_ECP_CLK_ENA	0x08	/* If 0 ECP Clock is stopped on Power down   */
-#define PCR_IRQ_POLAR	0x20	/* If 0 IRQ is level high or negative pulse, */
-				/* if 1 polarity is inverted                 */
-#define PCR_IRQ_ODRAIN	0x40	/* If 1, IRQ is open drain                   */
-
-/* Tape UARTs and Parallel Port Config Register (TUP) bits */
-#define TUP_EPP_TIMO	0x02	/* Enable EPP timeout IRQ                    */
-
-/* Advanced SuperIO Config Register (ASC) bits */
-#define ASC_LPT_IRQ7	0x01	/* Always use IRQ7 for LPT                  */
-#define ASC_DRV2_SEL	0x02	/* Logical Drive Exchange controlled by TDR  */
-
-#define FER_RESERVED	0x00
-#define FAR_RESERVED	0x00
-#define PTR_RESERVED	0x73
-#define FCR_RESERVED	0xc4
-#define PCR_RESERVED	0x10
-#define KRR_RESERVED	0x00
-#define PMC_RESERVED	0x98
-#define TUP_RESERVED	0xfb
-#define SIP_RESERVED	0x00
-#define ASC_RESERVED	0x18
-#define CS0CF0_RESERVED	0x00
-#define CS0CF1_RESERVED	0x08
-#define CS1CF0_RESERVED	0x00
-#define CS1CF1_RESERVED	0x08
-
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-extern spinlock_t ns87303_lock;
-
-static inline int ns87303_modify(unsigned long port, unsigned int index,
-				     unsigned char clr, unsigned char set)
-{
-	static unsigned char reserved[] = {
-		FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
-		PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
-		SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
-		CS1CF0_RESERVED, CS1CF1_RESERVED
-	};
-	unsigned long flags;
-	unsigned char value;
-
-	if (index > 0x0d)
-		return -EINVAL;
-
-	spin_lock_irqsave(&ns87303_lock, flags);
-
-	outb(index, port);
-	value = inb(port + 1);
-	value &= ~(reserved[index] | clr);
-	value |= set;
-	outb(value, port + 1);
-	outb(value, port + 1);
-
-	spin_unlock_irqrestore(&ns87303_lock, flags);
-
-	return 0;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* !(_SPARC_NS87303_H) */
diff --git a/include/asm-sparc64/of_device.h b/include/asm-sparc64/of_device.h
deleted file mode 100644
index a769fdbe164a..000000000000
--- a/include/asm-sparc64/of_device.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/of_device.h>
diff --git a/include/asm-sparc64/of_platform.h b/include/asm-sparc64/of_platform.h
deleted file mode 100644
index 78aa032b674c..000000000000
--- a/include/asm-sparc64/of_platform.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASM_SPARC64_OF_PLATFORM_H
-#define _ASM_SPARC64_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm-sparc/of_device.h
- *		by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-extern struct bus_type isa_bus_type;
-extern struct bus_type ebus_bus_type;
-extern struct bus_type sbus_bus_type;
-
-#define of_bus_type	of_platform_bus_type	/* for compatibility */
-
-#endif	/* _ASM_SPARC64_OF_PLATFORM_H */
diff --git a/include/asm-sparc64/openprom.h b/include/asm-sparc64/openprom.h
deleted file mode 100644
index b69e4a8c9170..000000000000
--- a/include/asm-sparc64/openprom.h
+++ /dev/null
@@ -1,280 +0,0 @@
-#ifndef __SPARC64_OPENPROM_H
-#define __SPARC64_OPENPROM_H
-
-/* openprom.h:  Prom structures and defines for access to the OPENBOOT
- *              prom routines and data areas.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __ASSEMBLY__
-/* V0 prom device operations. */
-struct linux_dev_v0_funcs {
-	int (*v0_devopen)(char *device_str);
-	int (*v0_devclose)(int dev_desc);
-	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
-};
-
-/* V2 and later prom device operations. */
-struct linux_dev_v2_funcs {
-	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
-	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
-	void (*v2_dumb_mem_free)(char *va, unsigned sz);
-
-	/* To map devices into virtual I/O space. */
-	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
-	void (*v2_dumb_munmap)(char *virta, unsigned size);
-
-	int (*v2_dev_open)(char *devpath);
-	void (*v2_dev_close)(int d);
-	int (*v2_dev_read)(int d, char *buf, int nbytes);
-	int (*v2_dev_write)(int d, char *buf, int nbytes);
-	int (*v2_dev_seek)(int d, int hi, int lo);
-
-	/* Never issued (multistage load support) */
-	void (*v2_wheee2)(void);
-	void (*v2_wheee3)(void);
-};
-
-struct linux_mlist_v0 {
-	struct linux_mlist_v0 *theres_more;
-	unsigned start_adr;
-	unsigned num_bytes;
-};
-
-struct linux_mem_v0 {
-	struct linux_mlist_v0 **v0_totphys;
-	struct linux_mlist_v0 **v0_prommap;
-	struct linux_mlist_v0 **v0_available; /* What we can use */
-};
-
-/* Arguments sent to the kernel from the boot prompt. */
-struct linux_arguments_v0 {
-	char *argv[8];
-	char args[100];
-	char boot_dev[2];
-	int boot_dev_ctrl;
-	int boot_dev_unit;
-	int dev_partition;
-	char *kernel_file_name;
-	void *aieee1;           /* XXX */
-};
-
-/* V2 and up boot things. */
-struct linux_bootargs_v2 {
-	char **bootpath;
-	char **bootargs;
-	int *fd_stdin;
-	int *fd_stdout;
-};
-
-/* The top level PROM vector. */
-struct linux_romvec {
-	/* Version numbers. */
-	unsigned int pv_magic_cookie;
-	unsigned int pv_romvers;
-	unsigned int pv_plugin_revision;
-	unsigned int pv_printrev;
-
-	/* Version 0 memory descriptors. */
-	struct linux_mem_v0 pv_v0mem;
-
-	/* Node operations. */
-	struct linux_nodeops *pv_nodeops;
-
-	char **pv_bootstr;
-	struct linux_dev_v0_funcs pv_v0devops;
-
-	char *pv_stdin;
-	char *pv_stdout;
-#define	PROMDEV_KBD	0		/* input from keyboard */
-#define	PROMDEV_SCREEN	0		/* output to screen */
-#define	PROMDEV_TTYA	1		/* in/out to ttya */
-#define	PROMDEV_TTYB	2		/* in/out to ttyb */
-
-	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
-	int (*pv_getchar)(void);
-	void (*pv_putchar)(int ch);
-
-	/* Non-blocking variants. */
-	int (*pv_nbgetchar)(void);
-	int (*pv_nbputchar)(int ch);
-
-	void (*pv_putstr)(char *str, int len);
-
-	/* Miscellany. */
-	void (*pv_reboot)(char *bootstr);
-	void (*pv_printf)(__const__ char *fmt, ...);
-	void (*pv_abort)(void);
-	__volatile__ int *pv_ticks;
-	void (*pv_halt)(void);
-	void (**pv_synchook)(void);
-
-	/* Evaluate a forth string, not different proto for V0 and V2->up. */
-	union {
-		void (*v0_eval)(int len, char *str);
-		void (*v2_eval)(char *str);
-	} pv_fortheval;
-
-	struct linux_arguments_v0 **pv_v0bootargs;
-
-	/* Get ether address. */
-	unsigned int (*pv_enaddr)(int d, char *enaddr);
-
-	struct linux_bootargs_v2 pv_v2bootargs;
-	struct linux_dev_v2_funcs pv_v2devops;
-
-	int filler[15];
-
-	/* This one is sun4c/sun4 only. */
-	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
-
-	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
-	 * No joke. Calling these when there is only one cpu probably
-	 * crashes the machine, have to test this. :-)
-	 */
-
-	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
-	 * 'thiscontext' executing at address 'prog_counter'
-	 */
-	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
-			   int thiscontext, char *prog_counter);
-
-	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
-	 * until a resume cpu call is made.
-	 */
-	int (*v3_cpustop)(unsigned int whichcpu);
-
-	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
-	 * resume cpu call is made.
-	 */
-	int (*v3_cpuidle)(unsigned int whichcpu);
-
-	/* v3_cpuresume() will resume processor 'whichcpu' executing
-	 * starting with whatever 'pc' and 'npc' were left at the
-	 * last 'idle' or 'stop' call.
-	 */
-	int (*v3_cpuresume)(unsigned int whichcpu);
-};
-
-/* Routines for traversing the prom device tree. */
-struct linux_nodeops {
-	int (*no_nextnode)(int node);
-	int (*no_child)(int node);
-	int (*no_proplen)(int node, char *name);
-	int (*no_getprop)(int node, char *name, char *val);
-	int (*no_setprop)(int node, char *name, char *val, int len);
-	char * (*no_nextprop)(int node, char *name);
-};
-
-/* More fun PROM structures for device probing. */
-#define PROMREG_MAX     24
-#define PROMVADDR_MAX   16
-#define PROMINTR_MAX    32
-
-struct linux_prom_registers {
-	unsigned which_io;	/* hi part of physical address			*/
-	unsigned phys_addr;	/* The physical address of this register	*/
-	int reg_size;		/* How many bytes does this register take up?	*/
-};
-
-struct linux_prom64_registers {
-	unsigned long phys_addr;
-	unsigned long reg_size;
-};
-
-struct linux_prom_irqs {
-	int pri;    /* IRQ priority */
-	int vector; /* This is foobar, what does it do? */
-};
-
-/* Element of the "ranges" vector */
-struct linux_prom_ranges {
-	unsigned int ot_child_space;
-	unsigned int ot_child_base;		/* Bus feels this */
-	unsigned int ot_parent_space;
-	unsigned int ot_parent_base;		/* CPU looks from here */
-	unsigned int or_size;
-};
-
-struct linux_prom64_ranges {
-	unsigned long ot_child_base;		/* Bus feels this */
-	unsigned long ot_parent_base;		/* CPU looks from here */
-	unsigned long or_size;
-};
-
-/* Ranges and reg properties are a bit different for PCI. */
-struct linux_prom_pci_registers {
-	unsigned int phys_hi;
-	unsigned int phys_mid;
-	unsigned int phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_pci_ranges {
-	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
-	unsigned int child_phys_mid;
-	unsigned int child_phys_lo;
-
-	unsigned int parent_phys_hi;
-	unsigned int parent_phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_pci_intmap {
-	unsigned int phys_hi;
-	unsigned int phys_mid;
-	unsigned int phys_lo;
-
-	unsigned int interrupt;
-
-	int          cnode;
-	unsigned int cinterrupt;
-};
-
-struct linux_prom_pci_intmask {
-	unsigned int phys_hi;
-	unsigned int phys_mid;
-	unsigned int phys_lo;
-	unsigned int interrupt;
-};
-
-struct linux_prom_ebus_ranges {
-	unsigned int child_phys_hi;
-	unsigned int child_phys_lo;
-
-	unsigned int parent_phys_hi;
-	unsigned int parent_phys_mid;
-	unsigned int parent_phys_lo;
-
-	unsigned int size;
-};
-
-struct linux_prom_ebus_intmap {
-	unsigned int phys_hi;
-	unsigned int phys_lo;
-
-	unsigned int interrupt;
-
-	int          cnode;
-	unsigned int cinterrupt;
-};
-
-struct linux_prom_ebus_intmask {
-	unsigned int phys_hi;
-	unsigned int phys_lo;
-	unsigned int interrupt;
-};
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC64_OPENPROM_H) */
diff --git a/include/asm-sparc64/openpromio.h b/include/asm-sparc64/openpromio.h
deleted file mode 100644
index 847ce2326ad5..000000000000
--- a/include/asm-sparc64/openpromio.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef	_SPARC64_OPENPROMIO_H
-#define	_SPARC64_OPENPROMIO_H
-
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * SunOS and Solaris /dev/openprom definitions. The ioctl values
- * were chosen to be exactly equal to the SunOS equivalents.
- */
-
-struct openpromio
-{
-	u_int	oprom_size;		/* Actual size of the oprom_array. */
-	char	oprom_array[1];		/* Holds property names and values. */
-};
-
-#define	OPROMMAXPARAM	4096		/* Maximum size of oprom_array. */
-
-#define	OPROMGETOPT		0x20004F01
-#define	OPROMSETOPT		0x20004F02
-#define	OPROMNXTOPT		0x20004F03
-#define	OPROMSETOPT2		0x20004F04
-#define	OPROMNEXT		0x20004F05
-#define	OPROMCHILD		0x20004F06
-#define	OPROMGETPROP		0x20004F07
-#define	OPROMNXTPROP		0x20004F08
-#define	OPROMU2P		0x20004F09
-#define	OPROMGETCONS		0x20004F0A
-#define	OPROMGETFBNAME		0x20004F0B
-#define	OPROMGETBOOTARGS	0x20004F0C
-/* Linux extensions */				/* Arguments in oprom_array: */
-#define OPROMSETCUR		0x20004FF0	/* int node - Sets current node */
-#define OPROMPCI2NODE		0x20004FF1	/* int pci_bus, pci_devfn - Sets current node to PCI device's node */
-#define OPROMPATH2NODE		0x20004FF2	/* char path[] - Set current node from fully qualified PROM path */
-
-/*
- * Return values from OPROMGETCONS:
- */
-
-#define OPROMCONS_NOT_WSCONS    0
-#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
-#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
-#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
-
-
-/*
- *  NetBSD/OpenBSD /dev/openprom definitions.
- */
-
-struct opiocdesc
-{
-	int	op_nodeid;		/* PROM Node ID (value-result) */
-	int	op_namelen;		/* Length of op_name. */
-	char	__user *op_name;	/* Pointer to the property name. */
-	int	op_buflen;		/* Length of op_buf (value-result) */
-	char	__user *op_buf;		/* Pointer to buffer. */
-};
-
-#define	OPIOCGET	_IOWR('O', 1, struct opiocdesc)
-#define	OPIOCSET	_IOW('O', 2, struct opiocdesc)
-#define	OPIOCNEXTPROP	_IOWR('O', 3, struct opiocdesc)
-#define	OPIOCGETOPTNODE	_IOR('O', 4, int)
-#define	OPIOCGETNEXT	_IOWR('O', 5, int)
-#define	OPIOCGETCHILD	_IOWR('O', 6, int)
-
-#endif /* _SPARC64_OPENPROMIO_H */
-
diff --git a/include/asm-sparc64/oplib.h b/include/asm-sparc64/oplib.h
deleted file mode 100644
index 55c5bb27e4da..000000000000
--- a/include/asm-sparc64/oplib.h
+++ /dev/null
@@ -1,322 +0,0 @@
-/* oplib.h:  Describes the interface and available routines in the
- *           Linux Prom library.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef __SPARC64_OPLIB_H
-#define __SPARC64_OPLIB_H
-
-#include <asm/openprom.h>
-
-/* OBP version string. */
-extern char prom_version[];
-
-/* Root node of the prom device tree, this stays constant after
- * initialization is complete.
- */
-extern int prom_root_node;
-
-/* PROM stdin and stdout */
-extern int prom_stdin, prom_stdout;
-
-/* /chosen node of the prom device tree, this stays constant after
- * initialization is complete.
- */
-extern int prom_chosen_node;
-
-/* Helper values and strings in arch/sparc64/kernel/head.S */
-extern const char prom_peer_name[];
-extern const char prom_compatible_name[];
-extern const char prom_root_compatible[];
-extern const char prom_cpu_compatible[];
-extern const char prom_finddev_name[];
-extern const char prom_chosen_path[];
-extern const char prom_cpu_path[];
-extern const char prom_getprop_name[];
-extern const char prom_mmu_name[];
-extern const char prom_callmethod_name[];
-extern const char prom_translate_name[];
-extern const char prom_map_name[];
-extern const char prom_unmap_name[];
-extern int prom_mmu_ihandle_cache;
-extern unsigned int prom_boot_mapped_pc;
-extern unsigned int prom_boot_mapping_mode;
-extern unsigned long prom_boot_mapping_phys_high, prom_boot_mapping_phys_low;
-
-struct linux_mlist_p1275 {
-	struct linux_mlist_p1275 *theres_more;
-	unsigned long start_adr;
-	unsigned long num_bytes;
-};
-
-struct linux_mem_p1275 {
-	struct linux_mlist_p1275 **p1275_totphys;
-	struct linux_mlist_p1275 **p1275_prommap;
-	struct linux_mlist_p1275 **p1275_available; /* What we can use */
-};
-
-/* The functions... */
-
-/* You must call prom_init() before using any of the library services,
- * preferably as early as possible.  Pass it the romvec pointer.
- */
-extern void prom_init(void *cif_handler, void *cif_stack);
-
-/* Boot argument acquisition, returns the boot command line string. */
-extern char *prom_getbootargs(void);
-
-/* Device utilities. */
-
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(const char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
-/* Miscellaneous routines, don't really fit in any category per se. */
-
-/* Reboot the machine with the command line passed. */
-extern void prom_reboot(const char *boot_command);
-
-/* Evaluate the forth string passed. */
-extern void prom_feval(const char *forth_string);
-
-/* Enter the prom, with possibility of continuation with the 'go'
- * command in newer proms.
- */
-extern void prom_cmdline(void);
-
-/* Enter the prom, with no chance of continuation for the stand-alone
- * which calls this.
- */
-extern void prom_halt(void) __attribute__ ((noreturn));
-
-/* Halt and power-off the machine. */
-extern void prom_halt_power_off(void) __attribute__ ((noreturn));
-
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- */
-typedef int (*callback_func_t)(long *cmd);
-extern void prom_setcallback(callback_func_t func_ptr);
-
-/* Acquire the IDPROM of the root node in the prom device tree.  This
- * gets passed a buffer where you would like it stuffed.  The return value
- * is the format type of this idprom or 0xff on error.
- */
-extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
-
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
-
-/* Prom's internal routines, don't use in kernel/boot code. */
-extern void prom_printf(const char *fmt, ...);
-extern void prom_write(const char *buf, unsigned int len);
-
-/* Multiprocessor operations... */
-#ifdef CONFIG_SMP
-/* Start the CPU with the given device tree node at the passed program
- * counter with the given arg passed in via register %o0.
- */
-extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg);
-
-/* Start the CPU with the given cpu ID at the passed program
- * counter with the given arg passed in via register %o0.
- */
-extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg);
-
-/* Stop the CPU with the given cpu ID.  */
-extern void prom_stopcpu_cpuid(int cpuid);
-
-/* Stop the current CPU. */
-extern void prom_stopself(void);
-
-/* Idle the current CPU. */
-extern void prom_idleself(void);
-
-/* Resume the CPU with the passed device tree node. */
-extern void prom_resumecpu(int cpunode);
-#endif
-
-/* Power management interfaces. */
-
-/* Put the current CPU to sleep. */
-extern void prom_sleepself(void);
-
-/* Put the entire system to sleep. */
-extern int prom_sleepsystem(void);
-
-/* Initiate a wakeup event. */
-extern int prom_wakeupsystem(void);
-
-/* MMU and memory related OBP interfaces. */
-
-/* Get unique string identifying SIMM at given physical address. */
-extern int prom_getunumber(int syndrome_code,
-			   unsigned long phys_addr,
-			   char *buf, int buflen);
-
-/* Retain physical memory to the caller across soft resets. */
-extern unsigned long prom_retain(const char *name,
-				 unsigned long pa_low, unsigned long pa_high,
-				 long size, long align);
-
-/* Load explicit I/D TLB entries into the calling processor. */
-extern long prom_itlb_load(unsigned long index,
-			   unsigned long tte_data,
-			   unsigned long vaddr);
-
-extern long prom_dtlb_load(unsigned long index,
-			   unsigned long tte_data,
-			   unsigned long vaddr);
-
-/* Map/Unmap client program address ranges.  First the format of
- * the mapping mode argument.
- */
-#define PROM_MAP_WRITE	0x0001 /* Writable */
-#define PROM_MAP_READ	0x0002 /* Readable - sw */
-#define PROM_MAP_EXEC	0x0004 /* Executable - sw */
-#define PROM_MAP_LOCKED	0x0010 /* Locked, use i/dtlb load calls for this instead */
-#define PROM_MAP_CACHED	0x0020 /* Cacheable in both L1 and L2 caches */
-#define PROM_MAP_SE	0x0040 /* Side-Effects */
-#define PROM_MAP_GLOB	0x0080 /* Global */
-#define PROM_MAP_IE	0x0100 /* Invert-Endianness */
-#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED)
-
-extern int prom_map(int mode, unsigned long size,
-		    unsigned long vaddr, unsigned long paddr);
-extern void prom_unmap(unsigned long size, unsigned long vaddr);
-
-
-/* PROM device tree traversal functions... */
-
-#ifdef PROMLIB_INTERNAL
-
-/* Internal version of prom_getchild. */
-extern int __prom_getchild(int parent_node);
-
-/* Internal version of prom_getsibling. */
-extern int __prom_getsibling(int node);
-
-#endif
-
-/* Get the child node of the given node, or zero if no child exists. */
-extern int prom_getchild(int parent_node);
-
-/* Get the next sibling node of the given node, or zero if no further
- * siblings exist.
- */
-extern int prom_getsibling(int node);
-
-/* Get the length, at the passed node, of the given property type.
- * Returns -1 on error (ie. no such property at this node).
- */
-extern int prom_getproplen(int thisnode, const char *property);
-
-/* Fetch the requested property using the given buffer.  Returns
- * the number of bytes the prom put into your buffer or -1 on error.
- */
-extern int prom_getproperty(int thisnode, const char *property,
-			    char *prop_buffer, int propbuf_size);
-
-/* Acquire an integer property. */
-extern int prom_getint(int node, const char *property);
-
-/* Acquire an integer property, with a default value. */
-extern int prom_getintdefault(int node, const char *property, int defval);
-
-/* Acquire a boolean property, 0=FALSE 1=TRUE. */
-extern int prom_getbool(int node, const char *prop);
-
-/* Acquire a string property, null string on error. */
-extern void prom_getstring(int node, const char *prop, char *buf, int bufsize);
-
-/* Does the passed node have the given "name"? YES=1 NO=0 */
-extern int prom_nodematch(int thisnode, const char *name);
-
-/* Search all siblings starting at the passed node for "name" matching
- * the given string.  Returns the node on success, zero on failure.
- */
-extern int prom_searchsiblings(int node_start, const char *name);
-
-/* Return the first property type, as a string, for the given node.
- * Returns a null string on error. Buffer should be at least 32B long.
- */
-extern char *prom_firstprop(int node, char *buffer);
-
-/* Returns the next property after the passed property for the given
- * node.  Returns null string on failure. Buffer should be at least 32B long.
- */
-extern char *prom_nextprop(int node, const char *prev_property, char *buffer);
-
-/* Returns 1 if the specified node has given property. */
-extern int prom_node_has_property(int node, const char *property);
-
-/* Returns phandle of the path specified */
-extern int prom_finddevice(const char *name);
-
-/* Set the indicated property at the given node with the passed value.
- * Returns the number of bytes of your value that the prom took.
- */
-extern int prom_setprop(int node, const char *prop_name, char *prop_value,
-			int value_size);
-			
-extern int prom_pathtoinode(const char *path);
-extern int prom_inst2pkg(int);
-extern int prom_service_exists(const char *service_name);
-extern void prom_sun4v_guest_soft_state(void);
-
-extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
-
-/* Client interface level routines. */
-extern long p1275_cmd(const char *, long, ...);
-
-#if 0
-#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x))
-#else
-#define P1275_SIZE(x) x
-#endif
-
-/* We support at most 16 input and 1 output argument */
-#define P1275_ARG_NUMBER		0
-#define P1275_ARG_IN_STRING		1
-#define P1275_ARG_OUT_BUF		2
-#define P1275_ARG_OUT_32B		3
-#define P1275_ARG_IN_FUNCTION		4
-#define P1275_ARG_IN_BUF		5
-#define P1275_ARG_IN_64B		6
-
-#define P1275_IN(x) ((x) & 0xf)
-#define P1275_OUT(x) (((x) << 4) & 0xf0)
-#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o))
-#define P1275_ARG(n,x) ((x) << ((n)*3 + 8))
-
-#endif /* !(__SPARC64_OPLIB_H) */
diff --git a/include/asm-sparc64/page.h b/include/asm-sparc64/page.h
deleted file mode 100644
index 93f0881b766e..000000000000
--- a/include/asm-sparc64/page.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef _SPARC64_PAGE_H
-#define _SPARC64_PAGE_H
-
-#include <linux/const.h>
-
-#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
-#define PAGE_SHIFT   13
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
-#define PAGE_SHIFT   16
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
-#define PAGE_SHIFT   19
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
-#define PAGE_SHIFT   22
-#else
-#error No page size specified in kernel configuration
-#endif
-
-#define PAGE_SIZE    (_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK    (~(PAGE_SIZE-1))
-
-/* Flushing for D-cache alias handling is only needed if
- * the page size is smaller than 16K.
- */
-#if PAGE_SHIFT < 14
-#define DCACHE_ALIASING_POSSIBLE
-#endif
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define HPAGE_SHIFT		22
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
-#define HPAGE_SHIFT		19
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define HPAGE_SHIFT		16
-#endif
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
-#define HPAGE_MASK		(~(HPAGE_SIZE - 1UL))
-#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
-#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-#endif
-
-#ifndef __ASSEMBLY__
-
-extern void _clear_page(void *page);
-#define clear_page(X)	_clear_page((void *)(X))
-struct page;
-extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
-#define copy_page(X,Y)	memcpy((void *)(X), (void *)(Y), PAGE_SIZE)
-extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *topage);
-
-/* Unlike sparc32, sparc64's parameter passing API is more
- * sane in that structures which as small enough are passed
- * in registers instead of on the stack.  Thus, setting
- * STRICT_MM_TYPECHECKS does not generate worse code so
- * let's enable it to get the type checking.
- */
-
-#define STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/* These are used to make use of C type-checking.. */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long iopte; } iopte_t;
-typedef struct { unsigned int pmd; } pmd_t;
-typedef struct { unsigned int pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x)	((x).pte)
-#define iopte_val(x)	((x).iopte)
-#define pmd_val(x)      ((x).pmd)
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)	((x).pgprot)
-
-#define __pte(x)	((pte_t) { (x) } )
-#define __iopte(x)	((iopte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)	((pgprot_t) { (x) } )
-
-#else
-/* .. while these make it easier on the compiler */
-typedef unsigned long pte_t;
-typedef unsigned long iopte_t;
-typedef unsigned int pmd_t;
-typedef unsigned int pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)	(x)
-#define iopte_val(x)	(x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-
-#define __pte(x)	(x)
-#define __iopte(x)	(x)
-#define __pmd(x)        (x)
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-
-#endif /* (STRICT_MM_TYPECHECKS) */
-
-typedef struct page *pgtable_t;
-
-#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_32BIT) ? \
-				 (_AC(0x0000000070000000,UL)) : \
-				 (_AC(0xfffff80000000000,UL) + (1UL << 32UL)))
-
-#include <asm-generic/memory_model.h>
-
-#endif /* !(__ASSEMBLY__) */
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
-/* We used to stick this into a hard-coded global register (%g4)
- * but that does not make sense anymore.
- */
-#define PAGE_OFFSET		_AC(0xFFFFF80000000000,UL)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET)
-#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
-
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr)>>PAGE_SHIFT)
-
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define virt_to_phys __pa
-#define phys_to_virt __va
-
-#endif /* !(__ASSEMBLY__) */
-
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/page.h>
-
-#endif /* _SPARC64_PAGE_H */
diff --git a/include/asm-sparc64/param.h b/include/asm-sparc64/param.h
deleted file mode 100644
index f0125cf5a9df..000000000000
--- a/include/asm-sparc64/param.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ASMSPARC64_PARAM_H
-#define _ASMSPARC64_PARAM_H
-
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _ASMSPARC64_PARAM_H */
diff --git a/include/asm-sparc64/parport.h b/include/asm-sparc64/parport.h
deleted file mode 100644
index e9555b246c8d..000000000000
--- a/include/asm-sparc64/parport.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* parport.h: sparc64 specific parport initialization and dma.
- *
- * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
- */
-
-#ifndef _ASM_SPARC64_PARPORT_H
-#define _ASM_SPARC64_PARPORT_H 1
-
-#include <asm/ebus.h>
-#include <asm/ns87303.h>
-#include <asm/of_device.h>
-#include <asm/prom.h>
-
-#define PARPORT_PC_MAX_PORTS	PARPORT_MAX
-
-/*
- * While sparc64 doesn't have an ISA DMA API, we provide something that looks
- * close enough to make parport_pc happy
- */
-#define HAS_DMA
-
-static DEFINE_SPINLOCK(dma_spin_lock);
-
-#define claim_dma_lock() \
-({	unsigned long flags; \
-	spin_lock_irqsave(&dma_spin_lock, flags); \
-	flags; \
-})
-
-#define release_dma_lock(__flags) \
-	spin_unlock_irqrestore(&dma_spin_lock, __flags);
-
-static struct sparc_ebus_info {
-	struct ebus_dma_info info;
-	unsigned int addr;
-	unsigned int count;
-	int lock;
-
-	struct parport *port;
-} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
-
-static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
-
-static inline int request_dma(unsigned int dmanr, const char *device_id)
-{
-	if (dmanr >= PARPORT_PC_MAX_PORTS)
-		return -EINVAL;
-	if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
-		return -EBUSY;
-	return 0;
-}
-
-static inline void free_dma(unsigned int dmanr)
-{
-	if (dmanr >= PARPORT_PC_MAX_PORTS) {
-		printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
-		return;
-	}
-	if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
-		printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
-		return;
-	}	
-}
-
-static inline void enable_dma(unsigned int dmanr)
-{
-	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
-
-	if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
-			     sparc_ebus_dmas[dmanr].addr,
-			     sparc_ebus_dmas[dmanr].count))
-		BUG();
-}
-
-static inline void disable_dma(unsigned int dmanr)
-{
-	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
-}
-
-static inline void clear_dma_ff(unsigned int dmanr)
-{
-	/* nothing */
-}
-
-static inline void set_dma_mode(unsigned int dmanr, char mode)
-{
-	ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
-}
-
-static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
-{
-	sparc_ebus_dmas[dmanr].addr = addr;
-}
-
-static inline void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	sparc_ebus_dmas[dmanr].count = count;
-}
-
-static inline unsigned int get_dma_residue(unsigned int dmanr)
-{
-	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
-}
-
-static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
-{
-	unsigned long base = op->resource[0].start;
-	unsigned long config = op->resource[1].start;
-	unsigned long d_base = op->resource[2].start;
-	unsigned long d_len;
-	struct device_node *parent;
-	struct parport *p;
-	int slot, err;
-
-	parent = op->node->parent;
-	if (!strcmp(parent->name, "dma")) {
-		p = parport_pc_probe_port(base, base + 0x400,
-					  op->irqs[0], PARPORT_DMA_NOFIFO,
-					  op->dev.parent->parent);
-		if (!p)
-			return -ENOMEM;
-		dev_set_drvdata(&op->dev, p);
-		return 0;
-	}
-
-	for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
-		if (!test_and_set_bit(slot, dma_slot_map))
-			break;
-	}
-	err = -ENODEV;
-	if (slot >= PARPORT_PC_MAX_PORTS)
-		goto out_err;
-
-	spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
-
-	d_len = (op->resource[2].end - d_base) + 1UL;
-	sparc_ebus_dmas[slot].info.regs =
-		of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
-
-	if (!sparc_ebus_dmas[slot].info.regs)
-		goto out_clear_map;
-
-	sparc_ebus_dmas[slot].info.flags = 0;
-	sparc_ebus_dmas[slot].info.callback = NULL;
-	sparc_ebus_dmas[slot].info.client_cookie = NULL;
-	sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
-	strcpy(sparc_ebus_dmas[slot].info.name, "parport");
-	if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
-		goto out_unmap_regs;
-
-	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
-
-	/* Configure IRQ to Push Pull, Level Low */
-	/* Enable ECP, set bit 2 of the CTR first */
-	outb(0x04, base + 0x02);
-	ns87303_modify(config, PCR,
-		       PCR_EPP_ENABLE |
-		       PCR_IRQ_ODRAIN,
-		       PCR_ECP_ENABLE |
-		       PCR_ECP_CLK_ENA |
-		       PCR_IRQ_POLAR);
-
-	/* CTR bit 5 controls direction of port */
-	ns87303_modify(config, PTR,
-		       0, PTR_LPT_REG_DIR);
-
-	p = parport_pc_probe_port(base, base + 0x400,
-				  op->irqs[0],
-				  slot,
-				  op->dev.parent);
-	err = -ENOMEM;
-	if (!p)
-		goto out_disable_irq;
-
-	dev_set_drvdata(&op->dev, p);
-
-	return 0;
-
-out_disable_irq:
-	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
-	ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
-
-out_unmap_regs:
-	of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
-
-out_clear_map:
-	clear_bit(slot, dma_slot_map);
-
-out_err:
-	return err;
-}
-
-static int __devexit ecpp_remove(struct of_device *op)
-{
-	struct parport *p = dev_get_drvdata(&op->dev);
-	int slot = p->dma;
-
-	parport_pc_unregister_port(p);
-
-	if (slot != PARPORT_DMA_NOFIFO) {
-		unsigned long d_base = op->resource[2].start;
-		unsigned long d_len;
-
-		d_len = (op->resource[2].end - d_base) + 1UL;
-
-		ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
-		ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
-		of_iounmap(&op->resource[2],
-			   sparc_ebus_dmas[slot].info.regs,
-			   d_len);
-		clear_bit(slot, dma_slot_map);
-	}
-
-	return 0;
-}
-
-static struct of_device_id ecpp_match[] = {
-	{
-		.name = "ecpp",
-	},
-	{
-		.name = "parallel",
-		.compatible = "ecpp",
-	},
-	{
-		.name = "parallel",
-		.compatible = "ns87317-ecpp",
-	},
-	{},
-};
-
-static struct of_platform_driver ecpp_driver = {
-	.name			= "ecpp",
-	.match_table		= ecpp_match,
-	.probe			= ecpp_probe,
-	.remove			= __devexit_p(ecpp_remove),
-};
-
-static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
-	of_register_driver(&ecpp_driver, &of_bus_type);
-
-	return 0;
-}
-
-#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
deleted file mode 100644
index f59f2571295b..000000000000
--- a/include/asm-sparc64/pci.h
+++ /dev/null
@@ -1,209 +0,0 @@
-#ifndef __SPARC64_PCI_H
-#define __SPARC64_PCI_H
-
-#ifdef __KERNEL__
-
-#include <linux/dma-mapping.h>
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- * already-configured bus numbers - to be used for buggy BIOSes
- * or architectures with incomplete PCI setup by the loader.
- */
-#define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
-
-#define PCIBIOS_MIN_IO		0UL
-#define PCIBIOS_MIN_MEM		0UL
-
-#define PCI_IRQ_NONE		0xffffffff
-
-#define PCI_CACHE_LINE_BYTES	64
-
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/* The PCI address space does not equal the physical memory
- * address space.  The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS	(0)
-
-static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-					 dma_addr_t *dma_handle)
-{
-	return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
-}
-
-static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
-				       void *vaddr, dma_addr_t dma_handle)
-{
-	return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
-}
-
-static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
-					size_t size, int direction)
-{
-	return dma_map_single(&pdev->dev, ptr, size,
-			      (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
-				    size_t size, int direction)
-{
-	dma_unmap_single(&pdev->dev, dma_addr, size,
-			 (enum dma_data_direction) direction);
-}
-
-#define pci_map_page(dev, page, off, size, dir) \
-	pci_map_single(dev, (page_address(page) + (off)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
-	pci_unmap_single(dev,addr,sz,dir)
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
-			     int nents, int direction)
-{
-	return dma_map_sg(&pdev->dev, sg, nents,
-			  (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
-				int nents, int direction)
-{
-	dma_unmap_sg(&pdev->dev, sg, nents,
-		     (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
-					       dma_addr_t dma_handle,
-					       size_t size, int direction)
-{
-	dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
-				(enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
-						  dma_addr_t dma_handle,
-						  size_t size, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
-					   struct scatterlist *sg,
-					   int nents, int direction)
-{
-	dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
-			    (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
-					      struct scatterlist *sg,
-					      int nelems, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-
-/* PCI IOMMU mapping bypass support. */
-
-/* PCI 64-bit addressing works for all slots on all controller
- * types on sparc64.  However, it requires that the device
- * can drive enough of the 64 bits.
- */
-#define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
-#define PCI64_ADDR_BASE		0xfffc000000000000UL
-
-static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
-{
-	return dma_mapping_error(dma_addr);
-}
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	unsigned long cacheline_size;
-	u8 byte;
-
-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
-	if (byte == 0)
-		cacheline_size = 1024;
-	else
-		cacheline_size = (int) byte * 4;
-
-	*strat = PCI_DMA_BURST_BOUNDARY;
-	*strategy_parameter = cacheline_size;
-}
-#endif
-
-/* Return the index of the PCI controller for device PDEV. */
-
-extern int pci_domain_nr(struct pci_bus *bus);
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-	return 1;
-}
-
-/* Platform support for /proc/bus/pci/X/Y mmap()s. */
-
-#define HAVE_PCI_MMAP
-#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
-#define get_pci_unmapped_area get_fb_unmapped_area
-
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			       enum pci_mmap_state mmap_state,
-			       int write_combine);
-
-extern void
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res);
-
-extern void
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			struct pci_bus_region *region);
-
-extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
-
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return PCI_IRQ_NONE;
-}
-
-struct device_node;
-extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
-
-#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
-				 const struct resource *rsrc,
-				 resource_size_t *start, resource_size_t *end);
-#endif /* __KERNEL__ */
-
-#endif /* __SPARC64_PCI_H */
diff --git a/include/asm-sparc64/percpu.h b/include/asm-sparc64/percpu.h
deleted file mode 100644
index bee64593023e..000000000000
--- a/include/asm-sparc64/percpu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ARCH_SPARC64_PERCPU__
-#define __ARCH_SPARC64_PERCPU__
-
-#include <linux/compiler.h>
-
-register unsigned long __local_per_cpu_offset asm("g5");
-
-#ifdef CONFIG_SMP
-
-extern void real_setup_per_cpu_areas(void);
-
-extern unsigned long __per_cpu_base;
-extern unsigned long __per_cpu_shift;
-#define __per_cpu_offset(__cpu) \
-	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-#define __my_cpu_offset __local_per_cpu_offset
-
-#else /* ! SMP */
-
-#define real_setup_per_cpu_areas()		do { } while (0)
-
-#endif	/* SMP */
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SPARC64_PERCPU__ */
diff --git a/include/asm-sparc64/perfctr.h b/include/asm-sparc64/perfctr.h
deleted file mode 100644
index 836873002b75..000000000000
--- a/include/asm-sparc64/perfctr.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*----------------------------------------
-  PERFORMANCE INSTRUMENTATION  
-  Guillaume Thouvenin           08/10/98
-  David S. Miller               10/06/98
-  ---------------------------------------*/
-#ifndef PERF_COUNTER_API
-#define PERF_COUNTER_API
-
-/* sys_perfctr() interface.  First arg is operation code
- * from enumeration below.  The meaning of further arguments
- * are determined by the operation code.
- *
- * int sys_perfctr(int opcode, unsigned long arg0,
- *                 unsigned long arg1, unsigned long arg2)
- *
- * Pointers which are passed by the user are pointers to 64-bit
- * integers.
- *
- * Once enabled, performance counter state is retained until the
- * process either exits or performs an exec.  That is, performance
- * counters remain enabled for fork/clone children.
- */
-enum perfctr_opcode {
-	/* Enable UltraSparc performance counters, ARG0 is pointer
-	 * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
-	 * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
-	 * the initial PCR register value to use.
-	 */
-	PERFCTR_ON,
-
-	/* Disable UltraSparc performance counters.  The PCR is written
-	 * with zero and the user counter accumulator pointers and
-	 * working PCR register value are forgotten.
-	 */
-	PERFCTR_OFF,
-
-	/* Add current D0 and D1 PIC values into user pointers given
-	 * in PERFCTR_ON operation.  The PIC is cleared before returning.
-	 */
-	PERFCTR_READ,
-
-	/* Clear the PIC register. */
-	PERFCTR_CLRPIC,
-
-	/* Begin using a new PCR value, the pointer to which is passed
-	 * in ARG0.  The PIC is also cleared after the new PCR value is
-	 * written.
-	 */
-	PERFCTR_SETPCR,
-
-	/* Store in pointer given in ARG0 the current PCR register value
-	 * being used.
-	 */
-	PERFCTR_GETPCR
-};
-
-/* I don't want the kernel's namespace to be polluted with this
- * stuff when this file is included.  --DaveM
- */
-#ifndef __KERNEL__
-
-#define  PRIV 0x00000001
-#define  SYS  0x00000002
-#define  USR  0x00000004
-
-/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
-#define  CYCLE_CNT            0x00000000
-#define  INSTR_CNT            0x00000010
-#define  DISPATCH0_IC_MISS    0x00000020
-#define  DISPATCH0_STOREBUF   0x00000030
-#define  IC_REF               0x00000080
-#define  DC_RD                0x00000090
-#define  DC_WR                0x000000A0
-#define  LOAD_USE             0x000000B0
-#define  EC_REF               0x000000C0
-#define  EC_WRITE_HIT_RDO     0x000000D0
-#define  EC_SNOOP_INV         0x000000E0
-#define  EC_RD_HIT            0x000000F0
-
-/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
-#define  US3_CYCLE_CNT	      	0x00000000
-#define  US3_INSTR_CNT	      	0x00000010
-#define  US3_DISPATCH0_IC_MISS	0x00000020
-#define  US3_DISPATCH0_BR_TGT	0x00000030
-#define  US3_DISPATCH0_2ND_BR	0x00000040
-#define  US3_RSTALL_STOREQ	0x00000050
-#define  US3_RSTALL_IU_USE	0x00000060
-#define  US3_IC_REF		0x00000080
-#define  US3_DC_RD		0x00000090
-#define  US3_DC_WR		0x000000a0
-#define  US3_EC_REF		0x000000c0
-#define  US3_EC_WR_HIT_RTO	0x000000d0
-#define  US3_EC_SNOOP_INV	0x000000e0
-#define  US3_EC_RD_MISS		0x000000f0
-#define  US3_PC_PORT0_RD	0x00000100
-#define  US3_SI_SNOOP		0x00000110
-#define  US3_SI_CIQ_FLOW	0x00000120
-#define  US3_SI_OWNED		0x00000130
-#define  US3_SW_COUNT_0		0x00000140
-#define  US3_IU_BR_MISS_TAKEN	0x00000150
-#define  US3_IU_BR_COUNT_TAKEN	0x00000160
-#define  US3_DISP_RS_MISPRED	0x00000170
-#define  US3_FA_PIPE_COMPL	0x00000180
-#define  US3_MC_READS_0		0x00000200
-#define  US3_MC_READS_1		0x00000210
-#define  US3_MC_READS_2		0x00000220
-#define  US3_MC_READS_3		0x00000230
-#define  US3_MC_STALLS_0	0x00000240
-#define  US3_MC_STALLS_2	0x00000250
-
-/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
-#define  CYCLE_CNT_D1         0x00000000
-#define  INSTR_CNT_D1         0x00000800
-#define  DISPATCH0_IC_MISPRED 0x00001000
-#define  DISPATCH0_FP_USE     0x00001800
-#define  IC_HIT               0x00004000
-#define  DC_RD_HIT            0x00004800
-#define  DC_WR_HIT            0x00005000
-#define  LOAD_USE_RAW         0x00005800
-#define  EC_HIT               0x00006000
-#define  EC_WB                0x00006800
-#define  EC_SNOOP_CB          0x00007000
-#define  EC_IT_HIT            0x00007800
-
-/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
-#define  US3_CYCLE_CNT_D1	0x00000000
-#define  US3_INSTR_CNT_D1	0x00000800
-#define  US3_DISPATCH0_MISPRED	0x00001000
-#define  US3_IC_MISS_CANCELLED	0x00001800
-#define  US3_RE_ENDIAN_MISS	0x00002000
-#define  US3_RE_FPU_BYPASS	0x00002800
-#define  US3_RE_DC_MISS		0x00003000
-#define  US3_RE_EC_MISS		0x00003800
-#define  US3_IC_MISS		0x00004000
-#define  US3_DC_RD_MISS		0x00004800
-#define  US3_DC_WR_MISS		0x00005000
-#define  US3_RSTALL_FP_USE	0x00005800
-#define  US3_EC_MISSES		0x00006000
-#define  US3_EC_WB		0x00006800
-#define  US3_EC_SNOOP_CB	0x00007000
-#define  US3_EC_IC_MISS		0x00007800
-#define  US3_RE_PC_MISS		0x00008000
-#define  US3_ITLB_MISS		0x00008800
-#define  US3_DTLB_MISS		0x00009000
-#define  US3_WC_MISS		0x00009800
-#define  US3_WC_SNOOP_CB	0x0000a000
-#define  US3_WC_SCRUBBED	0x0000a800
-#define  US3_WC_WB_WO_READ	0x0000b000
-#define  US3_PC_SOFT_HIT	0x0000c000
-#define  US3_PC_SNOOP_INV	0x0000c800
-#define  US3_PC_HARD_HIT	0x0000d000
-#define  US3_PC_PORT1_RD	0x0000d800
-#define  US3_SW_COUNT_1		0x0000e000
-#define  US3_IU_STAT_BR_MIS_UNTAKEN	0x0000e800
-#define  US3_IU_STAT_BR_COUNT_UNTAKEN	0x0000f000
-#define  US3_PC_MS_MISSES	0x0000f800
-#define  US3_MC_WRITES_0	0x00010800
-#define  US3_MC_WRITES_1	0x00011000
-#define  US3_MC_WRITES_2	0x00011800
-#define  US3_MC_WRITES_3	0x00012000
-#define  US3_MC_STALLS_1	0x00012800
-#define  US3_MC_STALLS_3	0x00013000
-#define  US3_RE_RAW_MISS	0x00013800
-#define  US3_FM_PIPE_COMPLETION	0x00014000
-
-struct vcounter_struct {
-  unsigned long long vcnt0;
-  unsigned long long vcnt1;
-};
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(PERF_COUNTER_API) */
diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h
deleted file mode 100644
index 326de104d014..000000000000
--- a/include/asm-sparc64/pgalloc.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef _SPARC64_PGALLOC_H
-#define _SPARC64_PGALLOC_H
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/quicklist.h>
-
-#include <asm/spitfire.h>
-#include <asm/cpudata.h>
-#include <asm/cacheflush.h>
-#include <asm/page.h>
-
-/* Page table allocation/freeing. */
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	return quicklist_alloc(0, GFP_KERNEL, NULL);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	quicklist_free(0, NULL, pgd);
-}
-
-#define pud_populate(MM, PUD, PMD)	pud_set(PUD, PMD)
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return quicklist_alloc(0, GFP_KERNEL, NULL);
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	quicklist_free(0, NULL, pmd);
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-					  unsigned long address)
-{
-	return quicklist_alloc(0, GFP_KERNEL, NULL);
-}
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
-					unsigned long address)
-{
-	struct page *page;
-	void *pg;
-
-	pg = quicklist_alloc(0, GFP_KERNEL, NULL);
-	if (!pg)
-		return NULL;
-	page = virt_to_page(pg);
-	pgtable_page_ctor(page);
-	return page;
-}
-		
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	quicklist_free(0, NULL, pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
-	pgtable_page_dtor(ptepage);
-	quicklist_free_page(0, NULL, ptepage);
-}
-
-
-#define pmd_populate_kernel(MM, PMD, PTE)	pmd_set(PMD, PTE)
-#define pmd_populate(MM,PMD,PTE_PAGE)		\
-	pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-static inline void check_pgt_cache(void)
-{
-	quicklist_trim(0, NULL, 25, 16);
-}
-
-#endif /* _SPARC64_PGALLOC_H */
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
deleted file mode 100644
index b87017747b5d..000000000000
--- a/include/asm-sparc64/pgtable.h
+++ /dev/null
@@ -1,781 +0,0 @@
-/*
- * pgtable.h: SpitFire page table operations.
- *
- * Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
- * Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef _SPARC64_PGTABLE_H
-#define _SPARC64_PGTABLE_H
-
-/* This file contains the functions and defines necessary to modify and use
- * the SpitFire page tables.
- */
-
-#include <asm-generic/pgtable-nopud.h>
-
-#include <linux/compiler.h>
-#include <linux/const.h>
-#include <asm/types.h>
-#include <asm/spitfire.h>
-#include <asm/asi.h>
-#include <asm/system.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
- * The page copy blockops can use 0x6000000 to 0x8000000.
- * The TSB is mapped in the 0x8000000 to 0xa000000 range.
- * The PROM resides in an area spanning 0xf0000000 to 0x100000000.
- * The vmalloc area spans 0x100000000 to 0x200000000.
- * Since modules need to be in the lowest 32-bits of the address space,
- * we place them right before the OBP area from 0x10000000 to 0xf0000000.
- * There is a single static kernel PMD which maps from 0x0 to address
- * 0x400000000.
- */
-#define	TLBTEMP_BASE		_AC(0x0000000006000000,UL)
-#define	TSBMAP_BASE		_AC(0x0000000008000000,UL)
-#define MODULES_VADDR		_AC(0x0000000010000000,UL)
-#define MODULES_LEN		_AC(0x00000000e0000000,UL)
-#define MODULES_END		_AC(0x00000000f0000000,UL)
-#define LOW_OBP_ADDRESS		_AC(0x00000000f0000000,UL)
-#define HI_OBP_ADDRESS		_AC(0x0000000100000000,UL)
-#define VMALLOC_START		_AC(0x0000000100000000,UL)
-#define VMALLOC_END		_AC(0x0000000200000000,UL)
-#define VMEMMAP_BASE		_AC(0x0000000200000000,UL)
-
-#define vmemmap			((struct page *)VMEMMAP_BASE)
-
-/* XXX All of this needs to be rethought so we can take advantage
- * XXX cheetah's full 64-bit virtual address space, ie. no more hole
- * XXX in the middle like on spitfire. -DaveM
- */
-/*
- * Given a virtual address, the lowest PAGE_SHIFT bits determine offset
- * into the page; the next higher PAGE_SHIFT-3 bits determine the pte#
- * in the proper pagetable (the -3 is from the 8 byte ptes, and each page
- * table is a single page long). The next higher PMD_BITS determine pmd# 
- * in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2) 
- * since the pmd entries are 4 bytes, and each pmd page is a single page 
- * long). Finally, the higher few bits determine pgde#.
- */
-
-/* PMD_SHIFT determines the size of the area a second-level page
- * table can map
- */
-#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
-#define PMD_SIZE	(_AC(1,UL) << PMD_SHIFT)
-#define PMD_MASK	(~(PMD_SIZE-1))
-#define PMD_BITS	(PAGE_SHIFT - 2)
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS)
-#define PGDIR_SIZE	(_AC(1,UL) << PGDIR_SHIFT)
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-#define PGDIR_BITS	(PAGE_SHIFT - 2)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-
-/* Entries per page directory level. */
-#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
-#define PTRS_PER_PMD	(1UL << PMD_BITS)
-#define PTRS_PER_PGD	(1UL << PGDIR_BITS)
-
-/* Kernel has a separate 44bit address space. */
-#define FIRST_USER_ADDRESS	0
-
-#define pte_ERROR(e)	__builtin_trap()
-#define pmd_ERROR(e)	__builtin_trap()
-#define pgd_ERROR(e)	__builtin_trap()
-
-#endif /* !(__ASSEMBLY__) */
-
-/* PTE bits which are the same in SUN4U and SUN4V format.  */
-#define _PAGE_VALID	  _AC(0x8000000000000000,UL) /* Valid TTE            */
-#define _PAGE_R	  	  _AC(0x8000000000000000,UL) /* Keep ref bit uptodate*/
-
-/* SUN4U pte bits... */
-#define _PAGE_SZ4MB_4U	  _AC(0x6000000000000000,UL) /* 4MB Page             */
-#define _PAGE_SZ512K_4U	  _AC(0x4000000000000000,UL) /* 512K Page            */
-#define _PAGE_SZ64K_4U	  _AC(0x2000000000000000,UL) /* 64K Page             */
-#define _PAGE_SZ8K_4U	  _AC(0x0000000000000000,UL) /* 8K Page              */
-#define _PAGE_NFO_4U	  _AC(0x1000000000000000,UL) /* No Fault Only        */
-#define _PAGE_IE_4U	  _AC(0x0800000000000000,UL) /* Invert Endianness    */
-#define _PAGE_SOFT2_4U	  _AC(0x07FC000000000000,UL) /* Software bits, set 2 */
-#define _PAGE_RES1_4U	  _AC(0x0002000000000000,UL) /* Reserved             */
-#define _PAGE_SZ32MB_4U	  _AC(0x0001000000000000,UL) /* (Panther) 32MB page  */
-#define _PAGE_SZ256MB_4U  _AC(0x2001000000000000,UL) /* (Panther) 256MB page */
-#define _PAGE_SZALL_4U	  _AC(0x6001000000000000,UL) /* All pgsz bits        */
-#define _PAGE_SN_4U	  _AC(0x0000800000000000,UL) /* (Cheetah) Snoop      */
-#define _PAGE_RES2_4U	  _AC(0x0000780000000000,UL) /* Reserved             */
-#define _PAGE_PADDR_4U	  _AC(0x000007FFFFFFE000,UL) /* (Cheetah) pa[42:13]  */
-#define _PAGE_SOFT_4U	  _AC(0x0000000000001F80,UL) /* Software bits:       */
-#define _PAGE_EXEC_4U	  _AC(0x0000000000001000,UL) /* Executable SW bit    */
-#define _PAGE_MODIFIED_4U _AC(0x0000000000000800,UL) /* Modified (dirty)     */
-#define _PAGE_FILE_4U	  _AC(0x0000000000000800,UL) /* Pagecache page       */
-#define _PAGE_ACCESSED_4U _AC(0x0000000000000400,UL) /* Accessed (ref'd)     */
-#define _PAGE_READ_4U	  _AC(0x0000000000000200,UL) /* Readable SW Bit      */
-#define _PAGE_WRITE_4U	  _AC(0x0000000000000100,UL) /* Writable SW Bit      */
-#define _PAGE_PRESENT_4U  _AC(0x0000000000000080,UL) /* Present              */
-#define _PAGE_L_4U	  _AC(0x0000000000000040,UL) /* Locked TTE           */
-#define _PAGE_CP_4U	  _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */
-#define _PAGE_CV_4U	  _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */
-#define _PAGE_E_4U	  _AC(0x0000000000000008,UL) /* side-Effect          */
-#define _PAGE_P_4U	  _AC(0x0000000000000004,UL) /* Privileged Page      */
-#define _PAGE_W_4U	  _AC(0x0000000000000002,UL) /* Writable             */
-
-/* SUN4V pte bits... */
-#define _PAGE_NFO_4V	  _AC(0x4000000000000000,UL) /* No Fault Only        */
-#define _PAGE_SOFT2_4V	  _AC(0x3F00000000000000,UL) /* Software bits, set 2 */
-#define _PAGE_MODIFIED_4V _AC(0x2000000000000000,UL) /* Modified (dirty)     */
-#define _PAGE_ACCESSED_4V _AC(0x1000000000000000,UL) /* Accessed (ref'd)     */
-#define _PAGE_READ_4V	  _AC(0x0800000000000000,UL) /* Readable SW Bit      */
-#define _PAGE_WRITE_4V	  _AC(0x0400000000000000,UL) /* Writable SW Bit      */
-#define _PAGE_PADDR_4V	  _AC(0x00FFFFFFFFFFE000,UL) /* paddr[55:13]         */
-#define _PAGE_IE_4V	  _AC(0x0000000000001000,UL) /* Invert Endianness    */
-#define _PAGE_E_4V	  _AC(0x0000000000000800,UL) /* side-Effect          */
-#define _PAGE_CP_4V	  _AC(0x0000000000000400,UL) /* Cacheable in P-Cache */
-#define _PAGE_CV_4V	  _AC(0x0000000000000200,UL) /* Cacheable in V-Cache */
-#define _PAGE_P_4V	  _AC(0x0000000000000100,UL) /* Privileged Page      */
-#define _PAGE_EXEC_4V	  _AC(0x0000000000000080,UL) /* Executable Page      */
-#define _PAGE_W_4V	  _AC(0x0000000000000040,UL) /* Writable             */
-#define _PAGE_SOFT_4V	  _AC(0x0000000000000030,UL) /* Software bits        */
-#define _PAGE_FILE_4V	  _AC(0x0000000000000020,UL) /* Pagecache page       */
-#define _PAGE_PRESENT_4V  _AC(0x0000000000000010,UL) /* Present              */
-#define _PAGE_RESV_4V	  _AC(0x0000000000000008,UL) /* Reserved             */
-#define _PAGE_SZ16GB_4V	  _AC(0x0000000000000007,UL) /* 16GB Page            */
-#define _PAGE_SZ2GB_4V	  _AC(0x0000000000000006,UL) /* 2GB Page             */
-#define _PAGE_SZ256MB_4V  _AC(0x0000000000000005,UL) /* 256MB Page           */
-#define _PAGE_SZ32MB_4V	  _AC(0x0000000000000004,UL) /* 32MB Page            */
-#define _PAGE_SZ4MB_4V	  _AC(0x0000000000000003,UL) /* 4MB Page             */
-#define _PAGE_SZ512K_4V	  _AC(0x0000000000000002,UL) /* 512K Page            */
-#define _PAGE_SZ64K_4V	  _AC(0x0000000000000001,UL) /* 64K Page             */
-#define _PAGE_SZ8K_4V	  _AC(0x0000000000000000,UL) /* 8K Page              */
-#define _PAGE_SZALL_4V	  _AC(0x0000000000000007,UL) /* All pgsz bits        */
-
-#if PAGE_SHIFT == 13
-#define _PAGE_SZBITS_4U	_PAGE_SZ8K_4U
-#define _PAGE_SZBITS_4V	_PAGE_SZ8K_4V
-#elif PAGE_SHIFT == 16
-#define _PAGE_SZBITS_4U	_PAGE_SZ64K_4U
-#define _PAGE_SZBITS_4V	_PAGE_SZ64K_4V
-#elif PAGE_SHIFT == 19
-#define _PAGE_SZBITS_4U	_PAGE_SZ512K_4U
-#define _PAGE_SZBITS_4V	_PAGE_SZ512K_4V
-#elif PAGE_SHIFT == 22
-#define _PAGE_SZBITS_4U	_PAGE_SZ4MB_4U
-#define _PAGE_SZBITS_4V	_PAGE_SZ4MB_4V
-#else
-#error Wrong PAGE_SHIFT specified
-#endif
-
-#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
-#define _PAGE_SZHUGE_4U	_PAGE_SZ4MB_4U
-#define _PAGE_SZHUGE_4V	_PAGE_SZ4MB_4V
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
-#define _PAGE_SZHUGE_4U	_PAGE_SZ512K_4U
-#define _PAGE_SZHUGE_4V	_PAGE_SZ512K_4V
-#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
-#define _PAGE_SZHUGE_4U	_PAGE_SZ64K_4U
-#define _PAGE_SZHUGE_4V	_PAGE_SZ64K_4V
-#endif
-
-/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */
-#define __P000	__pgprot(0)
-#define __P001	__pgprot(0)
-#define __P010	__pgprot(0)
-#define __P011	__pgprot(0)
-#define __P100	__pgprot(0)
-#define __P101	__pgprot(0)
-#define __P110	__pgprot(0)
-#define __P111	__pgprot(0)
-
-#define __S000	__pgprot(0)
-#define __S001	__pgprot(0)
-#define __S010	__pgprot(0)
-#define __S011	__pgprot(0)
-#define __S100	__pgprot(0)
-#define __S101	__pgprot(0)
-#define __S110	__pgprot(0)
-#define __S111	__pgprot(0)
-
-#ifndef __ASSEMBLY__
-
-extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long);
-
-extern unsigned long pte_sz_bits(unsigned long size);
-
-extern pgprot_t PAGE_KERNEL;
-extern pgprot_t PAGE_KERNEL_LOCKED;
-extern pgprot_t PAGE_COPY;
-extern pgprot_t PAGE_SHARED;
-
-/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */
-extern unsigned long _PAGE_IE;
-extern unsigned long _PAGE_E;
-extern unsigned long _PAGE_CACHE;
-
-extern unsigned long pg_iobits;
-extern unsigned long _PAGE_ALL_SZ_BITS;
-extern unsigned long _PAGE_SZBITS;
-
-extern struct page *mem_map_zero;
-#define ZERO_PAGE(vaddr)	(mem_map_zero)
-
-/* PFNs are real physical page numbers.  However, mem_map only begins to record
- * per-page information starting at pfn_base.  This is to handle systems where
- * the first physical page in the machine is at some huge physical address,
- * such as 4GB.   This is common on a partitioned E10000, for example.
- */
-static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
-{
-	unsigned long paddr = pfn << PAGE_SHIFT;
-	unsigned long sz_bits;
-
-	sz_bits = 0UL;
-	if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) {
-		__asm__ __volatile__(
-		"\n661:	sethi		%%uhi(%1), %0\n"
-		"	sllx		%0, 32, %0\n"
-		"	.section	.sun4v_2insn_patch, \"ax\"\n"
-		"	.word		661b\n"
-		"	mov		%2, %0\n"
-		"	nop\n"
-		"	.previous\n"
-		: "=r" (sz_bits)
-		: "i" (_PAGE_SZBITS_4U), "i" (_PAGE_SZBITS_4V));
-	}
-	return __pte(paddr | sz_bits | pgprot_val(prot));
-}
-#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
-
-/* This one can be done with two shifts.  */
-static inline unsigned long pte_pfn(pte_t pte)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__(
-	"\n661:	sllx		%1, %2, %0\n"
-	"	srlx		%0, %3, %0\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sllx		%1, %4, %0\n"
-	"	srlx		%0, %5, %0\n"
-	"	.previous\n"
-	: "=r" (ret)
-	: "r" (pte_val(pte)),
-	  "i" (21), "i" (21 + PAGE_SHIFT),
-	  "i" (8), "i" (8 + PAGE_SHIFT));
-
-	return ret;
-}
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t prot)
-{
-	unsigned long mask, tmp;
-
-	/* SUN4U: 0x600307ffffffecb8 (negated == 0x9ffcf80000001347)
-	 * SUN4V: 0x30ffffffffffee17 (negated == 0xcf000000000011e8)
-	 *
-	 * Even if we use negation tricks the result is still a 6
-	 * instruction sequence, so don't try to play fancy and just
-	 * do the most straightforward implementation.
-	 *
-	 * Note: We encode this into 3 sun4v 2-insn patch sequences.
-	 */
-
-	__asm__ __volatile__(
-	"\n661:	sethi		%%uhi(%2), %1\n"
-	"	sethi		%%hi(%2), %0\n"
-	"\n662:	or		%1, %%ulo(%2), %1\n"
-	"	or		%0, %%lo(%2), %0\n"
-	"\n663:	sllx		%1, 32, %1\n"
-	"	or		%0, %1, %0\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%3), %1\n"
-	"	sethi		%%hi(%3), %0\n"
-	"	.word		662b\n"
-	"	or		%1, %%ulo(%3), %1\n"
-	"	or		%0, %%lo(%3), %0\n"
-	"	.word		663b\n"
-	"	sllx		%1, 32, %1\n"
-	"	or		%0, %1, %0\n"
-	"	.previous\n"
-	: "=r" (mask), "=r" (tmp)
-	: "i" (_PAGE_PADDR_4U | _PAGE_MODIFIED_4U | _PAGE_ACCESSED_4U |
-	       _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_E_4U | _PAGE_PRESENT_4U |
-	       _PAGE_SZBITS_4U),
-	  "i" (_PAGE_PADDR_4V | _PAGE_MODIFIED_4V | _PAGE_ACCESSED_4V |
-	       _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_E_4V | _PAGE_PRESENT_4V |
-	       _PAGE_SZBITS_4V));
-
-	return __pte((pte_val(pte) & mask) | (pgprot_val(prot) & ~mask));
-}
-
-static inline pte_t pgoff_to_pte(unsigned long off)
-{
-	off <<= PAGE_SHIFT;
-
-	__asm__ __volatile__(
-	"\n661:	or		%0, %2, %0\n"
-	"	.section	.sun4v_1insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	or		%0, %3, %0\n"
-	"	.previous\n"
-	: "=r" (off)
-	: "0" (off), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
-
-	return __pte(off);
-}
-
-static inline pgprot_t pgprot_noncached(pgprot_t prot)
-{
-	unsigned long val = pgprot_val(prot);
-
-	__asm__ __volatile__(
-	"\n661:	andn		%0, %2, %0\n"
-	"	or		%0, %3, %0\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	andn		%0, %4, %0\n"
-	"	or		%0, %5, %0\n"
-	"	.previous\n"
-	: "=r" (val)
-	: "0" (val), "i" (_PAGE_CP_4U | _PAGE_CV_4U), "i" (_PAGE_E_4U),
-	             "i" (_PAGE_CP_4V | _PAGE_CV_4V), "i" (_PAGE_E_4V));
-
-	return __pgprot(val);
-}
-/* Various pieces of code check for platform support by ifdef testing
- * on "pgprot_noncached".  That's broken and should be fixed, but for
- * now...
- */
-#define pgprot_noncached pgprot_noncached
-
-#ifdef CONFIG_HUGETLB_PAGE
-static inline pte_t pte_mkhuge(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	sethi		%%uhi(%1), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	mov		%2, %0\n"
-	"	nop\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_SZHUGE_4U), "i" (_PAGE_SZHUGE_4V));
-
-	return __pte(pte_val(pte) | mask);
-}
-#endif
-
-static inline pte_t pte_mkdirty(pte_t pte)
-{
-	unsigned long val = pte_val(pte), tmp;
-
-	__asm__ __volatile__(
-	"\n661:	or		%0, %3, %0\n"
-	"	nop\n"
-	"\n662:	nop\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%4), %1\n"
-	"	sllx		%1, 32, %1\n"
-	"	.word		662b\n"
-	"	or		%1, %%lo(%4), %1\n"
-	"	or		%0, %1, %0\n"
-	"	.previous\n"
-	: "=r" (val), "=r" (tmp)
-	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
-	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
-
-	return __pte(val);
-}
-
-static inline pte_t pte_mkclean(pte_t pte)
-{
-	unsigned long val = pte_val(pte), tmp;
-
-	__asm__ __volatile__(
-	"\n661:	andn		%0, %3, %0\n"
-	"	nop\n"
-	"\n662:	nop\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%4), %1\n"
-	"	sllx		%1, 32, %1\n"
-	"	.word		662b\n"
-	"	or		%1, %%lo(%4), %1\n"
-	"	andn		%0, %1, %0\n"
-	"	.previous\n"
-	: "=r" (val), "=r" (tmp)
-	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
-	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
-
-	return __pte(val);
-}
-
-static inline pte_t pte_mkwrite(pte_t pte)
-{
-	unsigned long val = pte_val(pte), mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
-
-	return __pte(val | mask);
-}
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	unsigned long val = pte_val(pte), tmp;
-
-	__asm__ __volatile__(
-	"\n661:	andn		%0, %3, %0\n"
-	"	nop\n"
-	"\n662:	nop\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%4), %1\n"
-	"	sllx		%1, 32, %1\n"
-	"	.word		662b\n"
-	"	or		%1, %%lo(%4), %1\n"
-	"	andn		%0, %1, %0\n"
-	"	.previous\n"
-	: "=r" (val), "=r" (tmp)
-	: "0" (val), "i" (_PAGE_WRITE_4U | _PAGE_W_4U),
-	  "i" (_PAGE_WRITE_4V | _PAGE_W_4V));
-
-	return __pte(val);
-}
-
-static inline pte_t pte_mkold(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
-
-	mask |= _PAGE_R;
-
-	return __pte(pte_val(pte) & ~mask);
-}
-
-static inline pte_t pte_mkyoung(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
-
-	mask |= _PAGE_R;
-
-	return __pte(pte_val(pte) | mask);
-}
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
-	return pte;
-}
-
-static inline unsigned long pte_young(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
-
-	return (pte_val(pte) & mask);
-}
-
-static inline unsigned long pte_dirty(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
-
-	return (pte_val(pte) & mask);
-}
-
-static inline unsigned long pte_write(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	mov		%1, %0\n"
-	"	nop\n"
-	"	.section	.sun4v_2insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	sethi		%%uhi(%2), %0\n"
-	"	sllx		%0, 32, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
-
-	return (pte_val(pte) & mask);
-}
-
-static inline unsigned long pte_exec(pte_t pte)
-{
-	unsigned long mask;
-
-	__asm__ __volatile__(
-	"\n661:	sethi		%%hi(%1), %0\n"
-	"	.section	.sun4v_1insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	mov		%2, %0\n"
-	"	.previous\n"
-	: "=r" (mask)
-	: "i" (_PAGE_EXEC_4U), "i" (_PAGE_EXEC_4V));
-
-	return (pte_val(pte) & mask);
-}
-
-static inline unsigned long pte_file(pte_t pte)
-{
-	unsigned long val = pte_val(pte);
-
-	__asm__ __volatile__(
-	"\n661:	and		%0, %2, %0\n"
-	"	.section	.sun4v_1insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	and		%0, %3, %0\n"
-	"	.previous\n"
-	: "=r" (val)
-	: "0" (val), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
-
-	return val;
-}
-
-static inline unsigned long pte_present(pte_t pte)
-{
-	unsigned long val = pte_val(pte);
-
-	__asm__ __volatile__(
-	"\n661:	and		%0, %2, %0\n"
-	"	.section	.sun4v_1insn_patch, \"ax\"\n"
-	"	.word		661b\n"
-	"	and		%0, %3, %0\n"
-	"	.previous\n"
-	: "=r" (val)
-	: "0" (val), "i" (_PAGE_PRESENT_4U), "i" (_PAGE_PRESENT_4V));
-
-	return val;
-}
-
-static inline int pte_special(pte_t pte)
-{
-	return 0;
-}
-
-#define pmd_set(pmdp, ptep)	\
-	(pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL))
-#define pud_set(pudp, pmdp)	\
-	(pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL))
-#define __pmd_page(pmd)		\
-	((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL)))
-#define pmd_page(pmd) 			virt_to_page((void *)__pmd_page(pmd))
-#define pud_page_vaddr(pud)		\
-	((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL)))
-#define pud_page(pud) 			virt_to_page((void *)pud_page_vaddr(pud))
-#define pmd_none(pmd)			(!pmd_val(pmd))
-#define pmd_bad(pmd)			(0)
-#define pmd_present(pmd)		(pmd_val(pmd) != 0U)
-#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0U)
-#define pud_none(pud)			(!pud_val(pud))
-#define pud_bad(pud)			(0)
-#define pud_present(pud)		(pud_val(pud) != 0U)
-#define pud_clear(pudp)			(pud_val(*(pudp)) = 0U)
-
-/* Same in both SUN4V and SUN4U.  */
-#define pte_none(pte) 			(!pte_val(pte))
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
-#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(pudp, address)	\
-	((pmd_t *) pud_page_vaddr(*(pudp)) + \
-	 (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(dir, address)	\
-	((pte_t *) __pmd_page(*(dir)) + \
-	 ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
-#define pte_offset_kernel		pte_index
-#define pte_offset_map			pte_index
-#define pte_offset_map_nested		pte_index
-#define pte_unmap(pte)			do { } while (0)
-#define pte_unmap_nested(pte)		do { } while (0)
-
-/* Actual page table PTE updates.  */
-extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig);
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
-{
-	pte_t orig = *ptep;
-
-	*ptep = pte;
-
-	/* It is more efficient to let flush_tlb_kernel_range()
-	 * handle init_mm tlb flushes.
-	 *
-	 * SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U
-	 *             and SUN4V pte layout, so this inline test is fine.
-	 */
-	if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID))
-		tlb_batch_add(mm, addr, ptep, orig);
-}
-
-#define pte_clear(mm,addr,ptep)		\
-	set_pte_at((mm), (addr), (ptep), __pte(0UL))
-
-#ifdef DCACHE_ALIASING_POSSIBLE
-#define __HAVE_ARCH_MOVE_PTE
-#define move_pte(pte, prot, old_addr, new_addr)				\
-({									\
- 	pte_t newpte = (pte);						\
-	if (tlb_type != hypervisor && pte_present(pte)) {		\
-		unsigned long this_pfn = pte_pfn(pte);			\
-									\
-		if (pfn_valid(this_pfn) &&				\
-		    (((old_addr) ^ (new_addr)) & (1 << 13)))		\
-			flush_dcache_page_all(current->mm,		\
-					      pfn_to_page(this_pfn));	\
-	}								\
-	newpte;								\
-})
-#endif
-
-extern pgd_t swapper_pg_dir[2048];
-extern pmd_t swapper_low_pmd_dir[2048];
-
-extern void paging_init(void);
-extern unsigned long find_ecache_flush_span(unsigned long size);
-
-/* These do nothing with the way I have things setup. */
-#define mmu_lockarea(vaddr, len)		(vaddr)
-#define mmu_unlockarea(vaddr, len)		do { } while(0)
-
-struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-
-/* Encode and de-code a swap entry */
-#define __swp_type(entry)	(((entry).val >> PAGE_SHIFT) & 0xffUL)
-#define __swp_offset(entry)	((entry).val >> (PAGE_SHIFT + 8UL))
-#define __swp_entry(type, offset)	\
-	( (swp_entry_t) \
-	  { \
-		(((long)(type) << PAGE_SHIFT) | \
-                 ((long)(offset) << (PAGE_SHIFT + 8UL))) \
-	  } )
-#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
-
-/* File offset in PTE support. */
-extern unsigned long pte_file(pte_t);
-#define pte_to_pgoff(pte)	(pte_val(pte) >> PAGE_SHIFT)
-extern pte_t pgoff_to_pte(unsigned long);
-#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
-
-extern unsigned long *sparc64_valid_addr_bitmap;
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr)	\
-	(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
-
-extern int page_in_phys_avail(unsigned long paddr);
-
-extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-			       unsigned long pfn,
-			       unsigned long size, pgprot_t prot);
-
-/*
- * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
- * its high 4 bits.  These macros/functions put it there or get it from there.
- */
-#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
-#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
-#define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
-
-#include <asm-generic/pgtable.h>
-
-/* We provide our own get_unmapped_area to cope with VA holes and
- * SHM area cache aliasing for userland.
- */
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-/* We provide a special get_unmapped_area for framebuffer mmaps to try and use
- * the largest alignment possible such that larget PTEs can be used.
- */
-extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
-					  unsigned long, unsigned long,
-					  unsigned long);
-#define HAVE_ARCH_FB_UNMAPPED_AREA
-
-extern void pgtable_cache_init(void);
-extern void sun4v_register_fault_status(void);
-extern void sun4v_ktsb_register(void);
-extern void __init cheetah_ecache_flush_init(void);
-extern void sun4v_patch_tlb_handlers(void);
-
-extern unsigned long cmdline_memory_size;
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC64_PGTABLE_H) */
diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h
deleted file mode 100644
index eaac842d88c3..000000000000
--- a/include/asm-sparc64/pil.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _SPARC64_PIL_H
-#define _SPARC64_PIL_H
-
-/* To avoid some locking problems, we hard allocate certain PILs
- * for SMP cross call messages that must do a etrap/rtrap.
- *
- * A local_irq_disable() does not block the cross call delivery, so
- * when SMP locking is an issue we reschedule the event into a PIL
- * interrupt which is blocked by local_irq_disable().
- *
- * In fact any XCALL which has to etrap/rtrap has a problem because
- * it is difficult to prevent rtrap from running BH's, and that would
- * need to be done if the XCALL arrived while %pil==15.
- */
-#define PIL_SMP_CALL_FUNC	1
-#define PIL_SMP_RECEIVE_SIGNAL	2
-#define PIL_SMP_CAPTURE		3
-#define PIL_SMP_CTX_NEW_VERSION	4
-#define PIL_DEVICE_IRQ		5
-
-#endif /* !(_SPARC64_PIL_H) */
diff --git a/include/asm-sparc64/poll.h b/include/asm-sparc64/poll.h
deleted file mode 100644
index ebeeb3816c40..000000000000
--- a/include/asm-sparc64/poll.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __SPARC64_POLL_H
-#define __SPARC64_POLL_H
-
-#define POLLWRNORM	POLLOUT
-#define POLLWRBAND	256
-#define POLLMSG		512
-#define POLLREMOVE	1024
-#define POLLRDHUP       2048
-
-#include <asm-generic/poll.h>
-
-#endif
diff --git a/include/asm-sparc64/posix_types.h b/include/asm-sparc64/posix_types.h
deleted file mode 100644
index 4eaaa0196636..000000000000
--- a/include/asm-sparc64/posix_types.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef __ARCH_SPARC64_POSIX_TYPES_H
-#define __ARCH_SPARC64_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long          __kernel_size_t;
-typedef long                   __kernel_ssize_t;
-typedef long                   __kernel_ptrdiff_t;
-typedef long                   __kernel_time_t;
-typedef long                   __kernel_clock_t;
-typedef int                    __kernel_pid_t;
-typedef int                    __kernel_ipc_pid_t;
-typedef unsigned int           __kernel_uid_t;
-typedef unsigned int           __kernel_gid_t;
-typedef unsigned long          __kernel_ino_t;
-typedef unsigned int           __kernel_mode_t;
-typedef unsigned short         __kernel_umode_t;
-typedef unsigned int           __kernel_nlink_t;
-typedef int                    __kernel_daddr_t;
-typedef long                   __kernel_off_t;
-typedef char *                 __kernel_caddr_t;
-typedef unsigned short	       __kernel_uid16_t;
-typedef unsigned short	       __kernel_gid16_t;
-typedef int                    __kernel_clockid_t;
-typedef int                    __kernel_timer_t;
-
-typedef unsigned short 	       __kernel_old_uid_t;
-typedef unsigned short         __kernel_old_gid_t;
-typedef __kernel_uid_t	       __kernel_uid32_t;
-typedef __kernel_gid_t	       __kernel_gid32_t;
-
-typedef unsigned int	       __kernel_old_dev_t;
-
-/* Note this piece of asymmetry from the v9 ABI.  */
-typedef int		       __kernel_suseconds_t;
-
-#ifdef __GNUC__
-typedef long long              __kernel_loff_t;
-#endif
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef __FD_SET
-static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
-}
-
-#undef __FD_CLR
-static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
-}
-
-#undef __FD_ISSET
-static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
-{ 
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant cases (8 or 32 longs,
- * for 256 and 1024-bit fd_sets respectively)
- */
-#undef __FD_ZERO
-static inline void __FD_ZERO(__kernel_fd_set *p)
-{
-	unsigned long *tmp = p->fds_bits;
-	int i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-			case 32:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
-			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
-			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
-			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
-			  return;
-			case 16:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
-			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
-			  return;
-			case 8:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
-			  return;
-			case 4:
-			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
-			  return;
-		}
-	}
-	i = __FDSET_LONGS;
-	while (i) {
-		i--;
-		*tmp = 0;
-		tmp++;
-	}
-}
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
deleted file mode 100644
index 26b4e5255761..000000000000
--- a/include/asm-sparc64/processor.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * include/asm-sparc64/processor.h
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __ASM_SPARC64_PROCESSOR_H
-#define __ASM_SPARC64_PROCESSOR_H
-
-/*
- * Sparc64 implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
-
-#include <asm/asi.h>
-#include <asm/pstate.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/* The sparc has no problems with write protection */
-#define wp_works_ok 1
-#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
-
-/*
- * User lives in his very own context, and cannot reference us. Note
- * that TASK_SIZE is a misnomer, it really gives maximum user virtual 
- * address that the kernel will allocate out.
- *
- * XXX No longer using virtual page tables, kill this upper limit...
- */
-#define VA_BITS		44
-#ifndef __ASSEMBLY__
-#define VPTE_SIZE	(1UL << (VA_BITS - PAGE_SHIFT + 3))
-#else
-#define VPTE_SIZE	(1 << (VA_BITS - PAGE_SHIFT + 3))
-#endif
-
-#define TASK_SIZE	((unsigned long)-VPTE_SIZE)
-#define TASK_SIZE_OF(tsk) \
-	(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
-	 (1UL << 32UL) : TASK_SIZE)
-#ifdef __KERNEL__
-
-#define STACK_TOP32	((1UL << 32UL) - PAGE_SIZE)
-#define STACK_TOP64	(0x0000080000000000UL - (1UL << 32UL))
-
-#define STACK_TOP	(test_thread_flag(TIF_32BIT) ? \
-			 STACK_TOP32 : STACK_TOP64)
-
-#define STACK_TOP_MAX	STACK_TOP64
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned char seg;
-} mm_segment_t;
-
-/* The Sparc processor specific thread struct. */
-/* XXX This should die, everything can go into thread_info now. */
-struct thread_struct {
-#ifdef CONFIG_DEBUG_SPINLOCK
-	/* How many spinlocks held by this thread.
-	 * Used with spin lock debugging to catch tasks
-	 * sleeping illegally with locks held.
-	 */
-	int smp_lock_count;
-	unsigned int smp_lock_pc;
-#else
-	int dummy; /* f'in gcc bug... */
-#endif
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-#ifndef CONFIG_DEBUG_SPINLOCK
-#define INIT_THREAD  {			\
-	0,				\
-}
-#else /* CONFIG_DEBUG_SPINLOCK */
-#define INIT_THREAD  {					\
-/* smp_lock_count, smp_lock_pc, */			\
-   0,		   0,					\
-}
-#endif /* !(CONFIG_DEBUG_SPINLOCK) */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-/* Return saved PC of a blocked thread. */
-struct task_struct;
-extern unsigned long thread_saved_pc(struct task_struct *);
-
-/* On Uniprocessor, even in RMO processes see TSO semantics */
-#ifdef CONFIG_SMP
-#define TSTATE_INITIAL_MM	TSTATE_TSO
-#else
-#define TSTATE_INITIAL_MM	TSTATE_RMO
-#endif
-
-/* Do necessary setup to start up a newly executed thread. */
-#define start_thread(regs, pc, sp) \
-do { \
-	unsigned long __asi = ASI_PNF; \
-	regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
-	regs->tpc = ((pc & (~3)) - 4); \
-	regs->tnpc = regs->tpc + 4; \
-	regs->y = 0; \
-	set_thread_wstate(1 << 3); \
-	if (current_thread_info()->utraps) { \
-		if (*(current_thread_info()->utraps) < 2) \
-			kfree(current_thread_info()->utraps); \
-		else \
-			(*(current_thread_info()->utraps))--; \
-		current_thread_info()->utraps = NULL; \
-	} \
-	__asm__ __volatile__( \
-	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
-	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
-	"wrpr		%%g0, (1 << 3), %%wstate\n\t" \
-	: \
-	: "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
-	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
-} while (0)
-
-#define start_thread32(regs, pc, sp) \
-do { \
-	unsigned long __asi = ASI_PNF; \
-	pc &= 0x00000000ffffffffUL; \
-	sp &= 0x00000000ffffffffUL; \
-	regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
-	regs->tpc = ((pc & (~3)) - 4); \
-	regs->tnpc = regs->tpc + 4; \
-	regs->y = 0; \
-	set_thread_wstate(2 << 3); \
-	if (current_thread_info()->utraps) { \
-		if (*(current_thread_info()->utraps) < 2) \
-			kfree(current_thread_info()->utraps); \
-		else \
-			(*(current_thread_info()->utraps))--; \
-		current_thread_info()->utraps = NULL; \
-	} \
-	__asm__ __volatile__( \
-	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
-	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
-	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
-	"wrpr		%%g0, (2 << 3), %%wstate\n\t" \
-	: \
-	: "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
-	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
-} while (0)
-
-/* Free all resources held by a thread. */
-#define release_thread(tsk)		do { } while (0)
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-extern unsigned long get_wchan(struct task_struct *task);
-
-#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
-#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
-#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
-
-#define cpu_relax()	barrier()
-
-/* Prefetch support.  This is tuned for UltraSPARC-III and later.
- * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
- * a shallower prefetch queue than later chips.
- */
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-static inline void prefetch(const void *x)
-{
-	/* We do not use the read prefetch mnemonic because that
-	 * prefetches into the prefetch-cache which only is accessible
-	 * by floating point operations in UltraSPARC-III and later.
-	 * By contrast, "#one_write" prefetches into the L2 cache
-	 * in shared state.
-	 */
-	__asm__ __volatile__("prefetch [%0], #one_write"
-			     : /* no outputs */
-			     : "r" (x));
-}
-
-static inline void prefetchw(const void *x)
-{
-	/* The most optimal prefetch to use for writes is
-	 * "#n_writes".  This brings the cacheline into the
-	 * L2 cache in "owned" state.
-	 */
-	__asm__ __volatile__("prefetch [%0], #n_writes"
-			     : /* no outputs */
-			     : "r" (x));
-}
-
-#define spin_lock_prefetch(x)	prefetchw(x)
-
-#define HAVE_ARCH_PICK_MMAP_LAYOUT
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc64/prom.h b/include/asm-sparc64/prom.h
deleted file mode 100644
index 5fa166ee3ffa..000000000000
--- a/include/asm-sparc64/prom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/prom.h>
diff --git a/include/asm-sparc64/psrcompat.h b/include/asm-sparc64/psrcompat.h
deleted file mode 100644
index 44b6327dbbf5..000000000000
--- a/include/asm-sparc64/psrcompat.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef _SPARC64_PSRCOMPAT_H
-#define _SPARC64_PSRCOMPAT_H
-
-#include <asm/pstate.h>
-
-/* Old 32-bit PSR fields for the compatibility conversion code. */
-#define PSR_CWP     0x0000001f         /* current window pointer     */
-#define PSR_ET      0x00000020         /* enable traps field         */
-#define PSR_PS      0x00000040         /* previous privilege level   */
-#define PSR_S       0x00000080         /* current privilege level    */
-#define PSR_PIL     0x00000f00         /* processor interrupt level  */
-#define PSR_EF      0x00001000         /* enable floating point      */
-#define PSR_EC      0x00002000         /* enable co-processor        */
-#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
-#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
-#define PSR_ICC     0x00f00000         /* integer condition codes    */
-#define PSR_C       0x00100000         /* carry bit                  */
-#define PSR_V       0x00200000         /* overflow bit               */
-#define PSR_Z       0x00400000         /* zero bit                   */
-#define PSR_N       0x00800000         /* negative bit               */
-#define PSR_VERS    0x0f000000         /* cpu-version field          */
-#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
-
-#define PSR_V8PLUS  0xff000000         /* fake impl/ver, meaning a 64bit CPU is present */
-#define PSR_XCC	    0x000f0000         /* if PSR_V8PLUS, this is %xcc */
-
-static inline unsigned int tstate_to_psr(unsigned long tstate)
-{
-	return ((tstate & TSTATE_CWP)			|
-		PSR_S					|
-		((tstate & TSTATE_ICC) >> 12)		|
-		((tstate & TSTATE_XCC) >> 20)		|
-		((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) |
-		PSR_V8PLUS);
-}
-
-static inline unsigned long psr_to_tstate_icc(unsigned int psr)
-{
-	unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12;
-	if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS)
-		tstate |= ((unsigned long)(psr & PSR_XCC)) << 20;
-	return tstate;
-}
-
-#endif /* !(_SPARC64_PSRCOMPAT_H) */
diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h
deleted file mode 100644
index a26a53777bb0..000000000000
--- a/include/asm-sparc64/pstate.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef _SPARC64_PSTATE_H
-#define _SPARC64_PSTATE_H
-
-#include <linux/const.h>
-
-/* The V9 PSTATE Register (with SpitFire extensions).
- *
- * -----------------------------------------------------------------------
- * | Resv | IG | MG | CLE | TLE |  MM  | RED | PEF | AM | PRIV | IE | AG |
- * -----------------------------------------------------------------------
- *  63  12  11   10    9     8    7   6   5     4     3     2     1    0
- */
-#define PSTATE_IG   _AC(0x0000000000000800,UL) /* Interrupt Globals.	*/
-#define PSTATE_MG   _AC(0x0000000000000400,UL) /* MMU Globals.		*/
-#define PSTATE_CLE  _AC(0x0000000000000200,UL) /* Current Little Endian.*/
-#define PSTATE_TLE  _AC(0x0000000000000100,UL) /* Trap Little Endian.	*/
-#define PSTATE_MM   _AC(0x00000000000000c0,UL) /* Memory Model.		*/
-#define PSTATE_TSO  _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder	*/
-#define PSTATE_PSO  _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder	*/
-#define PSTATE_RMO  _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/
-#define PSTATE_RED  _AC(0x0000000000000020,UL) /* Reset Error Debug.	*/
-#define PSTATE_PEF  _AC(0x0000000000000010,UL) /* Floating Point Enable.*/
-#define PSTATE_AM   _AC(0x0000000000000008,UL) /* Address Mask.		*/
-#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege.		*/
-#define PSTATE_IE   _AC(0x0000000000000002,UL) /* Interrupt Enable.	*/
-#define PSTATE_AG   _AC(0x0000000000000001,UL) /* Alternate Globals.	*/
-
-/* The V9 TSTATE Register (with SpitFire and Linux extensions).
- *
- * ---------------------------------------------------------------------
- * |  Resv |  GL  |  CCR  |  ASI  |  %pil  |  PSTATE  |  Resv  |  CWP  |
- * ---------------------------------------------------------------------
- *  63   43 42  40 39   32 31   24 23    20 19       8 7      5 4     0
- */
-#define TSTATE_GL	_AC(0x0000070000000000,UL) /* Global reg level  */
-#define TSTATE_CCR	_AC(0x000000ff00000000,UL) /* Condition Codes.	*/
-#define TSTATE_XCC	_AC(0x000000f000000000,UL) /* Condition Codes.	*/
-#define TSTATE_XNEG	_AC(0x0000008000000000,UL) /* %xcc Negative.	*/
-#define TSTATE_XZERO	_AC(0x0000004000000000,UL) /* %xcc Zero.	*/
-#define TSTATE_XOVFL	_AC(0x0000002000000000,UL) /* %xcc Overflow.	*/
-#define TSTATE_XCARRY	_AC(0x0000001000000000,UL) /* %xcc Carry.	*/
-#define TSTATE_ICC	_AC(0x0000000f00000000,UL) /* Condition Codes.	*/
-#define TSTATE_INEG	_AC(0x0000000800000000,UL) /* %icc Negative.	*/
-#define TSTATE_IZERO	_AC(0x0000000400000000,UL) /* %icc Zero.	*/
-#define TSTATE_IOVFL	_AC(0x0000000200000000,UL) /* %icc Overflow.	*/
-#define TSTATE_ICARRY	_AC(0x0000000100000000,UL) /* %icc Carry.	*/
-#define TSTATE_ASI	_AC(0x00000000ff000000,UL) /* AddrSpace ID.	*/
-#define TSTATE_PIL	_AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/
-#define TSTATE_PSTATE	_AC(0x00000000000fff00,UL) /* PSTATE.		*/
-#define TSTATE_IG	_AC(0x0000000000080000,UL) /* Interrupt Globals.*/
-#define TSTATE_MG	_AC(0x0000000000040000,UL) /* MMU Globals.	*/
-#define TSTATE_CLE	_AC(0x0000000000020000,UL) /* CurrLittleEndian.	*/
-#define TSTATE_TLE	_AC(0x0000000000010000,UL) /* TrapLittleEndian.	*/
-#define TSTATE_MM	_AC(0x000000000000c000,UL) /* Memory Model.	*/
-#define TSTATE_TSO	_AC(0x0000000000000000,UL) /* MM: TSO		*/
-#define TSTATE_PSO	_AC(0x0000000000004000,UL) /* MM: PSO		*/
-#define TSTATE_RMO	_AC(0x0000000000008000,UL) /* MM: RMO		*/
-#define TSTATE_RED	_AC(0x0000000000002000,UL) /* Reset Error Debug.*/
-#define TSTATE_PEF	_AC(0x0000000000001000,UL) /* FPU Enable.	*/
-#define TSTATE_AM	_AC(0x0000000000000800,UL) /* Address Mask.	*/
-#define TSTATE_PRIV	_AC(0x0000000000000400,UL) /* Privilege.	*/
-#define TSTATE_IE	_AC(0x0000000000000200,UL) /* Interrupt Enable.	*/
-#define TSTATE_AG	_AC(0x0000000000000100,UL) /* Alternate Globals.*/
-#define TSTATE_SYSCALL	_AC(0x0000000000000020,UL) /* in syscall trap   */
-#define TSTATE_CWP	_AC(0x000000000000001f,UL) /* Curr Win-Pointer.	*/
-
-/* Floating-Point Registers State Register.
- *
- * --------------------------------
- * |  Resv  |  FEF  |  DU  |  DL  |
- * --------------------------------
- *  63     3    2       1      0
- */
-#define FPRS_FEF	_AC(0x0000000000000004,UL) /* FPU Enable.	*/
-#define FPRS_DU		_AC(0x0000000000000002,UL) /* Dirty Upper.	*/
-#define FPRS_DL		_AC(0x0000000000000001,UL) /* Dirty Lower.	*/
-
-/* Version Register.
- *
- * ------------------------------------------------------
- * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN |
- * ------------------------------------------------------
- *  63   48 47  32 31  24 23  16 15    8 7    5 4      0
- */
-#define VERS_MANUF	_AC(0xffff000000000000,UL) /* Manufacturer.	*/
-#define VERS_IMPL	_AC(0x0000ffff00000000,UL) /* Implementation.	*/
-#define VERS_MASK	_AC(0x00000000ff000000,UL) /* Mask Set Revision.*/
-#define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
-#define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
-
-#endif /* !(_SPARC64_PSTATE_H) */
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
deleted file mode 100644
index b163da79bb6d..000000000000
--- a/include/asm-sparc64/ptrace.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef _SPARC64_PTRACE_H
-#define _SPARC64_PTRACE_H
-
-#include <asm/pstate.h>
-
-/* This struct defines the way the registers are stored on the 
- * stack during a system call and basically all traps.
- */
-
-/* This magic value must have the low 9 bits clear,
- * as that is where we encode the %tt value, see below.
- */
-#define PT_REGS_MAGIC 0x57ac6c00
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-struct pt_regs {
-	unsigned long u_regs[16]; /* globals and ins */
-	unsigned long tstate;
-	unsigned long tpc;
-	unsigned long tnpc;
-	unsigned int y;
-
-	/* We encode a magic number, PT_REGS_MAGIC, along
-	 * with the %tt (trap type) register value at trap
-	 * entry time.  The magic number allows us to identify
-	 * accurately a trap stack frame in the stack
-	 * unwinder, and the %tt value allows us to test
-	 * things like "in a system call" etc. for an arbitray
-	 * process.
-	 *
-	 * The PT_REGS_MAGIC is choosen such that it can be
-	 * loaded completely using just a sethi instruction.
-	 */
-	unsigned int magic;
-};
-
-static inline int pt_regs_trap_type(struct pt_regs *regs)
-{
-	return regs->magic & 0x1ff;
-}
-
-static inline bool pt_regs_is_syscall(struct pt_regs *regs)
-{
-	return (regs->tstate & TSTATE_SYSCALL);
-}
-
-static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
-{
-	return (regs->tstate &= ~TSTATE_SYSCALL);
-}
-
-struct pt_regs32 {
-	unsigned int psr;
-	unsigned int pc;
-	unsigned int npc;
-	unsigned int y;
-	unsigned int u_regs[16]; /* globals and ins */
-};
-
-#define UREG_G0        0
-#define UREG_G1        1
-#define UREG_G2        2
-#define UREG_G3        3
-#define UREG_G4        4
-#define UREG_G5        5
-#define UREG_G6        6
-#define UREG_G7        7
-#define UREG_I0        8
-#define UREG_I1        9
-#define UREG_I2        10
-#define UREG_I3        11
-#define UREG_I4        12
-#define UREG_I5        13
-#define UREG_I6        14
-#define UREG_I7        15
-#define UREG_FP        UREG_I6
-#define UREG_RETPC     UREG_I7
-
-/* A V9 register window */
-struct reg_window {
-	unsigned long locals[8];
-	unsigned long ins[8];
-};
-
-/* A 32-bit register window. */
-struct reg_window32 {
-	unsigned int locals[8];
-	unsigned int ins[8];
-};
-
-/* A V9 Sparc stack frame */
-struct sparc_stackf {
-	unsigned long locals[8];
-        unsigned long ins[6];
-	struct sparc_stackf *fp;
-	unsigned long callers_pc;
-	char *structptr;
-	unsigned long xargs[6];
-	unsigned long xxargs[1];
-};	
-
-/* A 32-bit Sparc stack frame */
-struct sparc_stackf32 {
-	unsigned int locals[8];
-        unsigned int ins[6];
-	unsigned int fp;
-	unsigned int callers_pc;
-	unsigned int structptr;
-	unsigned int xargs[6];
-	unsigned int xxargs[1];
-};	
-
-struct sparc_trapf {
-	unsigned long locals[8];
-	unsigned long ins[8];
-	unsigned long _unused;
-	struct pt_regs *regs;
-};
-
-#define TRACEREG_SZ	sizeof(struct pt_regs)
-#define STACKFRAME_SZ	sizeof(struct sparc_stackf)
-
-#define TRACEREG32_SZ	sizeof(struct pt_regs32)
-#define STACKFRAME32_SZ	sizeof(struct sparc_stackf32)
-
-#ifdef __KERNEL__
-
-struct global_reg_snapshot {
-	unsigned long		tstate;
-	unsigned long		tpc;
-	unsigned long		tnpc;
-	unsigned long		o7;
-	unsigned long		i7;
-	struct thread_info	*thread;
-	unsigned long		pad1;
-	unsigned long		pad2;
-};
-
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
-#define force_successful_syscall_return()	    \
-do {	current_thread_info()->syscall_noerror = 1; \
-} while (0)
-#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
-#define instruction_pointer(regs) ((regs)->tpc)
-#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-extern void show_regs(struct pt_regs *);
-extern void __show_regs(struct pt_regs *);
-#endif
-
-#else /* __ASSEMBLY__ */
-/* For assembly code. */
-#define TRACEREG_SZ		0xa0
-#define STACKFRAME_SZ		0xc0
-
-#define TRACEREG32_SZ		0x50
-#define STACKFRAME32_SZ		0x60
-#endif
-
-#ifdef __KERNEL__
-#define STACK_BIAS		2047
-#endif
-
-/* These are for pt_regs. */
-#define PT_V9_G0     0x00
-#define PT_V9_G1     0x08
-#define PT_V9_G2     0x10
-#define PT_V9_G3     0x18
-#define PT_V9_G4     0x20
-#define PT_V9_G5     0x28
-#define PT_V9_G6     0x30
-#define PT_V9_G7     0x38
-#define PT_V9_I0     0x40
-#define PT_V9_I1     0x48
-#define PT_V9_I2     0x50
-#define PT_V9_I3     0x58
-#define PT_V9_I4     0x60
-#define PT_V9_I5     0x68
-#define PT_V9_I6     0x70
-#define PT_V9_FP     PT_V9_I6
-#define PT_V9_I7     0x78
-#define PT_V9_TSTATE 0x80
-#define PT_V9_TPC    0x88
-#define PT_V9_TNPC   0x90
-#define PT_V9_Y      0x98
-#define PT_V9_MAGIC  0x9c
-#define PT_TSTATE	PT_V9_TSTATE
-#define PT_TPC		PT_V9_TPC
-#define PT_TNPC		PT_V9_TNPC
-
-/* These for pt_regs32. */
-#define PT_PSR    0x0
-#define PT_PC     0x4
-#define PT_NPC    0x8
-#define PT_Y      0xc
-#define PT_G0     0x10
-#define PT_WIM    PT_G0
-#define PT_G1     0x14
-#define PT_G2     0x18
-#define PT_G3     0x1c
-#define PT_G4     0x20
-#define PT_G5     0x24
-#define PT_G6     0x28
-#define PT_G7     0x2c
-#define PT_I0     0x30
-#define PT_I1     0x34
-#define PT_I2     0x38
-#define PT_I3     0x3c
-#define PT_I4     0x40
-#define PT_I5     0x44
-#define PT_I6     0x48
-#define PT_FP     PT_I6
-#define PT_I7     0x4c
-
-/* Reg_window offsets */
-#define RW_V9_L0     0x00
-#define RW_V9_L1     0x08
-#define RW_V9_L2     0x10
-#define RW_V9_L3     0x18
-#define RW_V9_L4     0x20
-#define RW_V9_L5     0x28
-#define RW_V9_L6     0x30
-#define RW_V9_L7     0x38
-#define RW_V9_I0     0x40
-#define RW_V9_I1     0x48
-#define RW_V9_I2     0x50
-#define RW_V9_I3     0x58
-#define RW_V9_I4     0x60
-#define RW_V9_I5     0x68
-#define RW_V9_I6     0x70
-#define RW_V9_I7     0x78
-
-#define RW_L0     0x00
-#define RW_L1     0x04
-#define RW_L2     0x08
-#define RW_L3     0x0c
-#define RW_L4     0x10
-#define RW_L5     0x14
-#define RW_L6     0x18
-#define RW_L7     0x1c
-#define RW_I0     0x20
-#define RW_I1     0x24
-#define RW_I2     0x28
-#define RW_I3     0x2c
-#define RW_I4     0x30
-#define RW_I5     0x34
-#define RW_I6     0x38
-#define RW_I7     0x3c
-
-/* Stack_frame offsets */
-#define SF_V9_L0     0x00
-#define SF_V9_L1     0x08
-#define SF_V9_L2     0x10
-#define SF_V9_L3     0x18
-#define SF_V9_L4     0x20
-#define SF_V9_L5     0x28
-#define SF_V9_L6     0x30
-#define SF_V9_L7     0x38
-#define SF_V9_I0     0x40
-#define SF_V9_I1     0x48
-#define SF_V9_I2     0x50
-#define SF_V9_I3     0x58
-#define SF_V9_I4     0x60
-#define SF_V9_I5     0x68
-#define SF_V9_FP     0x70
-#define SF_V9_PC     0x78
-#define SF_V9_RETP   0x80
-#define SF_V9_XARG0  0x88
-#define SF_V9_XARG1  0x90
-#define SF_V9_XARG2  0x98
-#define SF_V9_XARG3  0xa0
-#define SF_V9_XARG4  0xa8
-#define SF_V9_XARG5  0xb0
-#define SF_V9_XXARG  0xb8
-
-#define SF_L0     0x00
-#define SF_L1     0x04
-#define SF_L2     0x08
-#define SF_L3     0x0c
-#define SF_L4     0x10
-#define SF_L5     0x14
-#define SF_L6     0x18
-#define SF_L7     0x1c
-#define SF_I0     0x20
-#define SF_I1     0x24
-#define SF_I2     0x28
-#define SF_I3     0x2c
-#define SF_I4     0x30
-#define SF_I5     0x34
-#define SF_FP     0x38
-#define SF_PC     0x3c
-#define SF_RETP   0x40
-#define SF_XARG0  0x44
-#define SF_XARG1  0x48
-#define SF_XARG2  0x4c
-#define SF_XARG3  0x50
-#define SF_XARG4  0x54
-#define SF_XARG5  0x58
-#define SF_XXARG  0x5c
-
-#ifdef __KERNEL__
-
-/* global_reg_snapshot offsets */
-#define GR_SNAP_TSTATE	0x00
-#define GR_SNAP_TPC	0x08
-#define GR_SNAP_TNPC	0x10
-#define GR_SNAP_O7	0x18
-#define GR_SNAP_I7	0x20
-#define GR_SNAP_THREAD	0x28
-#define GR_SNAP_PAD1	0x30
-#define GR_SNAP_PAD2	0x38
-
-#endif  /*  __KERNEL__  */
-
-/* Stuff for the ptrace system call */
-#define PTRACE_SPARC_DETACH       11
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_READDATA           16
-#define PTRACE_WRITEDATA          17
-#define PTRACE_READTEXT           18
-#define PTRACE_WRITETEXT          19
-#define PTRACE_GETFPAREGS         20
-#define PTRACE_SETFPAREGS         21
-
-/* There are for debugging 64-bit processes, either from a 32 or 64 bit
- * parent.  Thus their complements are for debugging 32-bit processes only.
- */
-
-#define PTRACE_GETREGS64	  22
-#define PTRACE_SETREGS64	  23
-/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETFPREGS64	  25
-#define PTRACE_SETFPREGS64	  26
-
-#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/include/asm-sparc64/reboot.h b/include/asm-sparc64/reboot.h
deleted file mode 100644
index 3f3f43f5be5e..000000000000
--- a/include/asm-sparc64/reboot.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC64_REBOOT_H
-#define _SPARC64_REBOOT_H
-
-extern void machine_alt_power_off(void);
-
-#endif /* _SPARC64_REBOOT_H */
diff --git a/include/asm-sparc64/reg.h b/include/asm-sparc64/reg.h
deleted file mode 100644
index 77aa4804a60d..000000000000
--- a/include/asm-sparc64/reg.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/asm-sparc64/reg.h
- * Layout of the registers as expected by gdb on the Sparc
- * we should replace the user.h definitions with those in
- * this file, we don't even use the other 
- * -miguel
- *
- * The names of the structures, constants and aliases in this file
- * have the same names as the sunos ones, some programs rely on these
- * names (gdb for example).
- *
- */
-
-#ifndef __SPARC64_REG_H
-#define __SPARC64_REG_H
-
-struct regs {
-        unsigned long r_g1;
-        unsigned long r_g2;
-        unsigned long r_g3;
-        unsigned long r_g4;
-        unsigned long r_g5;
-        unsigned long r_g6;
-        unsigned long r_g7;
-        unsigned long r_o0;
-        unsigned long r_o1;
-        unsigned long r_o2;
-        unsigned long r_o3;
-        unsigned long r_o4;
-        unsigned long r_o5;
-        unsigned long r_o6;
-        unsigned long r_o7;
-        unsigned long __pad;
-        unsigned long r_tstate;
-        unsigned long r_tpc;
-        unsigned long r_tnpc;
-        unsigned int  r_y;
-        unsigned int  r_fprs;
-};
-
-#define FPU_REGS_TYPE unsigned int
-#define FPU_FSR_TYPE unsigned long
-
-struct fp_status {
-        unsigned long fpu_fr[32];
-        unsigned long Fpu_fsr;
-};
-
-struct fpu {
-	struct fp_status f_fpstatus;
-};
-
-#define fpu_regs  f_fpstatus.fpu_fr
-#define fpu_fsr   f_fpstatus.Fpu_fsr
-
-#endif /* __SPARC64_REG_H */
diff --git a/include/asm-sparc64/resource.h b/include/asm-sparc64/resource.h
deleted file mode 100644
index 4f08fb5e4ca4..000000000000
--- a/include/asm-sparc64/resource.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * resource.h: Resource definitions.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC64_RESOURCE_H
-#define _SPARC64_RESOURCE_H
-
-/*
- * These two resource limit IDs have a Sparc/Linux-specific ordering,
- * the rest comes from the generic header:
- */
-#define RLIMIT_NOFILE		6	/* max number of open files */
-#define RLIMIT_NPROC		7	/* max number of processes */
-
-#include <asm-generic/resource.h>
-
-#endif /* !(_SPARC64_RESOURCE_H) */
diff --git a/include/asm-sparc64/rtc.h b/include/asm-sparc64/rtc.h
deleted file mode 100644
index f9ecb1fe2ecd..000000000000
--- a/include/asm-sparc64/rtc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * rtc.h: Definitions for access to the Mostek real time clock
- *
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- */
-
-#ifndef _RTC_H
-#define _RTC_H
-
-#include <linux/ioctl.h>
-
-struct rtc_time
-{
-	int	sec;	/* Seconds (0-59) */
-	int	min;	/* Minutes (0-59) */
-	int	hour;	/* Hour (0-23) */
-	int	dow;	/* Day of the week (1-7) */
-	int	dom;	/* Day of the month (1-31) */
-	int	month;	/* Month of year (1-12) */
-	int	year;	/* Year (0-99) */
-};
-
-#define RTCGET _IOR('p', 20, struct rtc_time)
-#define RTCSET _IOW('p', 21, struct rtc_time)
-
-#endif
diff --git a/include/asm-sparc64/rwsem-const.h b/include/asm-sparc64/rwsem-const.h
deleted file mode 100644
index a303c9d64d84..000000000000
--- a/include/asm-sparc64/rwsem-const.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* rwsem-const.h: RW semaphore counter constants.  */
-#ifndef _SPARC64_RWSEM_CONST_H
-#define _SPARC64_RWSEM_CONST_H
-
-#define RWSEM_UNLOCKED_VALUE		0x00000000
-#define RWSEM_ACTIVE_BIAS		0x00000001
-#define RWSEM_ACTIVE_MASK		0x0000ffff
-#define RWSEM_WAITING_BIAS		0xffff0000
-#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-#endif /* _SPARC64_RWSEM_CONST_H */
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
deleted file mode 100644
index 1dc129ac2feb..000000000000
--- a/include/asm-sparc64/rwsem.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * rwsem.h: R/W semaphores implemented using CAS
- *
- * Written by David S. Miller (davem@redhat.com), 2001.
- * Derived from asm-i386/rwsem.h
- */
-#ifndef _SPARC64_RWSEM_H
-#define _SPARC64_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <asm/rwsem-const.h>
-
-struct rwsem_waiter;
-
-struct rw_semaphore {
-	signed int count;
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
-  __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name) \
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-			 struct lock_class_key *key);
-
-#define init_rwsem(sem)						\
-do {								\
-	static struct lock_class_key __key;			\
-								\
-	__init_rwsem((sem), #sem, &__key);			\
-} while (0)
-
-extern void __down_read(struct rw_semaphore *sem);
-extern int __down_read_trylock(struct rw_semaphore *sem);
-extern void __down_write(struct rw_semaphore *sem);
-extern int __down_write_trylock(struct rw_semaphore *sem);
-extern void __up_read(struct rw_semaphore *sem);
-extern void __up_write(struct rw_semaphore *sem);
-extern void __downgrade_write(struct rw_semaphore *sem);
-
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
-	__down_write(sem);
-}
-
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
-{
-	return atomic_add_return(delta, (atomic_t *)(&sem->count));
-}
-
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
-{
-	atomic_add(delta, (atomic_t *)(&sem->count));
-}
-
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return (sem->count != 0);
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _SPARC64_RWSEM_H */
diff --git a/include/asm-sparc64/sbus.h b/include/asm-sparc64/sbus.h
deleted file mode 100644
index 24a04a55cf85..000000000000
--- a/include/asm-sparc64/sbus.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/* sbus.h: Defines for the Sun SBus.
- *
- * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_SBUS_H
-#define _SPARC64_SBUS_H
-
-#include <linux/dma-mapping.h>
-#include <linux/ioport.h>
-
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/iommu.h>
-#include <asm/scatterlist.h>
-
-/* We scan which devices are on the SBus using the PROM node device
- * tree.  SBus devices are described in two different ways.  You can
- * either get an absolute address at which to access the device, or
- * you can get a SBus 'slot' number and an offset within that slot.
- */
-
-/* The base address at which to calculate device OBIO addresses. */
-#define SUN_SBUS_BVADDR        0x00000000
-#define SBUS_OFF_MASK          0x0fffffff
-
-/* These routines are used to calculate device address from slot
- * numbers + offsets, and vice versa.
- */
-
-static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
-{
-  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
-}
-
-static inline int sbus_dev_slot(unsigned long dev_addr)
-{
-  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
-}
-
-struct sbus_bus;
-
-/* Linux SBUS device tables */
-struct sbus_dev {
-	struct of_device	ofdev;
-	struct sbus_bus		*bus;
-	struct sbus_dev		*next;
-	struct sbus_dev		*child;
-	struct sbus_dev		*parent;
-	int prom_node;	
-	char prom_name[64];
-	int slot;
-
-	struct resource resource[PROMREG_MAX];
-
-	struct linux_prom_registers reg_addrs[PROMREG_MAX];
-	int num_registers;
-
-	struct linux_prom_ranges device_ranges[PROMREG_MAX];
-	int num_device_ranges;
-
-	unsigned int irqs[4];
-	int num_irqs;
-};
-#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
-
-/* This struct describes the SBus(s) found on this machine. */
-struct sbus_bus {
-	struct of_device	ofdev;
-	struct sbus_dev		*devices;	/* Tree of SBUS devices	*/
-	struct sbus_bus		*next;		/* Next SBUS in system	*/
-	int			prom_node;      /* OBP node of SBUS	*/
-	char			prom_name[64];	/* Usually "sbus" or "sbi" */
-	int			clock_freq;
-
-	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
-	int num_sbus_ranges;
-
-	int portid;
-};
-#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
-
-extern struct sbus_bus *sbus_root;
-
-/* Device probing routines could find these handy */
-#define for_each_sbus(bus) \
-        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
-
-#define for_each_sbusdev(device, bus) \
-        for((device) = (bus)->devices; (device); (device)=(device)->next)
-        
-#define for_all_sbusdev(device, bus) \
-	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
-		for ((device) = (bus)->devices; (device); (device) = (device)->next)
-
-/* Driver DVMA interfaces. */
-#define sbus_can_dma_64bit(sdev)	(1)
-#define sbus_can_burst64(sdev)		(1)
-extern void sbus_set_sbus64(struct sbus_dev *, int);
-extern void sbus_fill_device_irq(struct sbus_dev *);
-
-static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size,
-					  dma_addr_t *dma_handle)
-{
-	return dma_alloc_coherent(&sdev->ofdev.dev, size,
-				  dma_handle, GFP_ATOMIC);
-}
-
-static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size,
-					void *vaddr, dma_addr_t dma_handle)
-{
-	return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle);
-}
-
-#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
-#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
-#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
-#define	SBUS_DMA_NONE		DMA_NONE
-
-/* All the rest use streaming mode mappings. */
-static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr,
-					 size_t size, int direction)
-{
-	return dma_map_single(&sdev->ofdev.dev, ptr, size,
-			      (enum dma_data_direction) direction);
-}
-
-static inline void sbus_unmap_single(struct sbus_dev *sdev,
-				     dma_addr_t dma_addr, size_t size,
-				     int direction)
-{
-	dma_unmap_single(&sdev->ofdev.dev, dma_addr, size,
-			 (enum dma_data_direction) direction);
-}
-
-static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg,
-			      int nents, int direction)
-{
-	return dma_map_sg(&sdev->ofdev.dev, sg, nents,
-			  (enum dma_data_direction) direction);
-}
-
-static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg,
-				 int nents, int direction)
-{
-	dma_unmap_sg(&sdev->ofdev.dev, sg, nents,
-		     (enum dma_data_direction) direction);
-}
-
-/* Finally, allow explicit synchronization of streamable mappings. */
-static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev,
-						dma_addr_t dma_handle,
-						size_t size, int direction)
-{
-	dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size,
-				(enum dma_data_direction) direction);
-}
-#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
-
-static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev,
-						   dma_addr_t dma_handle,
-						   size_t size, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev,
-					    struct scatterlist *sg,
-					    int nents, int direction)
-{
-	dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents,
-			    (enum dma_data_direction) direction);
-}
-#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
-
-static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev,
-					       struct scatterlist *sg,
-					       int nents, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
-extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
-extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
-extern int sbus_arch_preinit(void);
-extern void sbus_arch_postinit(void);
-
-#endif /* !(_SPARC64_SBUS_H) */
diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
deleted file mode 100644
index 81bd058f9382..000000000000
--- a/include/asm-sparc64/scatterlist.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _SPARC64_SCATTERLIST_H
-#define _SPARC64_SCATTERLIST_H
-
-#include <asm/page.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-
-	unsigned int	length;
-
-	dma_addr_t	dma_address;
-	__u32		dma_length;
-};
-
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)     	((sg)->dma_length)
-
-#define ISA_DMA_THRESHOLD	(~0UL)
-
-#define ARCH_HAS_SG_CHAIN
-
-#endif /* !(_SPARC64_SCATTERLIST_H) */
diff --git a/include/asm-sparc64/scratchpad.h b/include/asm-sparc64/scratchpad.h
deleted file mode 100644
index 5e8b01fb3343..000000000000
--- a/include/asm-sparc64/scratchpad.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _SPARC64_SCRATCHPAD_H
-#define _SPARC64_SCRATCHPAD_H
-
-/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD.  */
-
-#define SCRATCHPAD_MMU_MISS	0x00 /* Shared with OBP - set by OBP	    */
-#define SCRATCHPAD_CPUID	0x08 /* Shared with OBP - set by hypervisor */
-#define SCRATCHPAD_UTSBREG1	0x10
-#define SCRATCHPAD_UTSBREG2	0x18
-	/* 0x20 and 0x28, hypervisor only... */
-#define SCRATCHPAD_UNUSED1	0x30
-#define SCRATCHPAD_UNUSED2	0x38 /* Reserved for OBP		    */
-
-#endif /* !(_SPARC64_SCRATCHPAD_H) */
diff --git a/include/asm-sparc64/seccomp.h b/include/asm-sparc64/seccomp.h
deleted file mode 100644
index 7fcd9968192b..000000000000
--- a/include/asm-sparc64/seccomp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _ASM_SECCOMP_H
-
-#include <linux/thread_info.h> /* already defines TIF_32BIT */
-
-#ifndef TIF_32BIT
-#error "unexpected TIF_32BIT on sparc64"
-#endif
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#define __NR_seccomp_read_32 __NR_read
-#define __NR_seccomp_write_32 __NR_write
-#define __NR_seccomp_exit_32 __NR_exit
-#define __NR_seccomp_sigreturn_32 __NR_sigreturn
-
-#endif /* _ASM_SECCOMP_H */
diff --git a/include/asm-sparc64/sections.h b/include/asm-sparc64/sections.h
deleted file mode 100644
index 3f4b9fdc28d0..000000000000
--- a/include/asm-sparc64/sections.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SPARC64_SECTIONS_H
-#define _SPARC64_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-extern char _start[];
-
-#endif
diff --git a/include/asm-sparc64/semaphore.h b/include/asm-sparc64/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-sparc64/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-sparc64/sembuf.h b/include/asm-sparc64/sembuf.h
deleted file mode 100644
index 99f04e4e288c..000000000000
--- a/include/asm-sparc64/sembuf.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _SPARC64_SEMBUF_H
-#define _SPARC64_SEMBUF_H
-
-/* 
- * The semid64_ds structure for sparc64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-};
-
-#endif /* _SPARC64_SEMBUF_H */
diff --git a/include/asm-sparc64/setup.h b/include/asm-sparc64/setup.h
deleted file mode 100644
index 5053df3cec40..000000000000
--- a/include/asm-sparc64/setup.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- *	Just a place holder. 
- */
-
-#ifndef _SPARC64_SETUP_H
-#define _SPARC64_SETUP_H
-
-#define COMMAND_LINE_SIZE	2048
-
-#endif /* _SPARC64_SETUP_H */
diff --git a/include/asm-sparc64/sfafsr.h b/include/asm-sparc64/sfafsr.h
deleted file mode 100644
index e96137b04a4f..000000000000
--- a/include/asm-sparc64/sfafsr.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef _SPARC64_SFAFSR_H
-#define _SPARC64_SFAFSR_H
-
-#include <linux/const.h>
-
-/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
-
-#define SFAFSR_ME		(_AC(1,UL) << SFAFSR_ME_SHIFT)
-#define SFAFSR_ME_SHIFT		32
-#define SFAFSR_PRIV		(_AC(1,UL) << SFAFSR_PRIV_SHIFT)
-#define SFAFSR_PRIV_SHIFT	31
-#define SFAFSR_ISAP		(_AC(1,UL) << SFAFSR_ISAP_SHIFT)
-#define SFAFSR_ISAP_SHIFT	30
-#define SFAFSR_ETP		(_AC(1,UL) << SFAFSR_ETP_SHIFT)
-#define SFAFSR_ETP_SHIFT	29
-#define SFAFSR_IVUE		(_AC(1,UL) << SFAFSR_IVUE_SHIFT)
-#define SFAFSR_IVUE_SHIFT	28
-#define SFAFSR_TO		(_AC(1,UL) << SFAFSR_TO_SHIFT)
-#define SFAFSR_TO_SHIFT		27
-#define SFAFSR_BERR		(_AC(1,UL) << SFAFSR_BERR_SHIFT)
-#define SFAFSR_BERR_SHIFT	26
-#define SFAFSR_LDP		(_AC(1,UL) << SFAFSR_LDP_SHIFT)
-#define SFAFSR_LDP_SHIFT	25
-#define SFAFSR_CP		(_AC(1,UL) << SFAFSR_CP_SHIFT)
-#define SFAFSR_CP_SHIFT		24
-#define SFAFSR_WP		(_AC(1,UL) << SFAFSR_WP_SHIFT)
-#define SFAFSR_WP_SHIFT		23
-#define SFAFSR_EDP		(_AC(1,UL) << SFAFSR_EDP_SHIFT)
-#define SFAFSR_EDP_SHIFT	22
-#define SFAFSR_UE		(_AC(1,UL) << SFAFSR_UE_SHIFT)
-#define SFAFSR_UE_SHIFT		21
-#define SFAFSR_CE		(_AC(1,UL) << SFAFSR_CE_SHIFT)
-#define SFAFSR_CE_SHIFT		20
-#define SFAFSR_ETS		(_AC(0xf,UL) << SFAFSR_ETS_SHIFT)
-#define SFAFSR_ETS_SHIFT	16
-#define SFAFSR_PSYND		(_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT)
-#define SFAFSR_PSYND_SHIFT	0
-
-/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read
- *                     ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write
- */
-
-#define UDBE_UE			(_AC(1,UL) << 9)
-#define UDBE_CE			(_AC(1,UL) << 8)
-#define UDBE_E_SYNDR		(_AC(0xff,UL) << 0)
-
-/* The trap handlers for asynchronous errors encode the AFSR and
- * other pieces of information into a 64-bit argument for C code
- * encoded as follows:
- *
- * -----------------------------------------------
- * |  UDB_H  |  UDB_L  | TL>1  |  TT  |   AFSR   |
- * -----------------------------------------------
- *  63     54 53     44    42   41  33 32       0
- *
- * The AFAR is passed in unchanged.
- */
-#define SFSTAT_UDBH_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
-#define SFSTAT_UDBH_SHIFT	54
-#define SFSTAT_UDBL_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
-#define SFSTAT_UDBL_SHIFT	44
-#define SFSTAT_TL_GT_ONE	(_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT)
-#define SFSTAT_TL_GT_ONE_SHIFT	42
-#define SFSTAT_TRAP_TYPE	(_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT)
-#define SFSTAT_TRAP_TYPE_SHIFT	33
-#define SFSTAT_AFSR_MASK	(_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT)
-#define SFSTAT_AFSR_SHIFT	0
-
-/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */
-#define ESTATE_ERR_CE		0x1 /* Correctable errors                    */
-#define ESTATE_ERR_NCE		0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */
-#define ESTATE_ERR_ISAP		0x4 /* System address parity error           */
-#define ESTATE_ERR_ALL		(ESTATE_ERR_CE | \
-				 ESTATE_ERR_NCE | \
-				 ESTATE_ERR_ISAP)
-
-/* The various trap types that report using the above state. */
-#define TRAP_TYPE_IAE		0x09 /* Instruction Access Error             */
-#define TRAP_TYPE_DAE		0x32 /* Data Access Error                    */
-#define TRAP_TYPE_CEE		0x63 /* Correctable ECC Error                */
-
-#endif /* _SPARC64_SFAFSR_H */
diff --git a/include/asm-sparc64/sfp-machine.h b/include/asm-sparc64/sfp-machine.h
deleted file mode 100644
index c9331b02d9c8..000000000000
--- a/include/asm-sparc64/sfp-machine.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* Machine-dependent software floating-point definitions.
-   Sparc64 kernel version.
-   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Richard Henderson (rth@cygnus.com),
-		  Jakub Jelinek (jj@ultra.linux.cz) and
-		  David S. Miller (davem@redhat.com).
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If
-   not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef _SFP_MACHINE_H
-#define _SFP_MACHINE_H
-   
-#define _FP_W_TYPE_SIZE		64
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
-
-#define _FP_MUL_MEAT_S(R,X,Y)					\
-  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
-#define _FP_MUL_MEAT_D(R,X,Y)					\
-  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_Q(R,X,Y)					\
-  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
-#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv_norm(D,R,X,Y)
-#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
-
-#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1)
-#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1
-#define _FP_NANSIGN_S		0
-#define _FP_NANSIGN_D		0
-#define _FP_NANSIGN_Q		0
-
-#define _FP_KEEPNANFRACP 1
-
-/* If one NaN is signaling and the other is not,
- * we choose that one, otherwise we choose X.
- */
-/* For _Qp_* and _Q_*, this should prefer X, for
- * CPU instruction emulation this should prefer Y.
- * (see SPAMv9 B.2.2 section).
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
-  do {								\
-    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
-	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
-      {								\
-	R##_s = X##_s;						\
-	_FP_FRAC_COPY_##wc(R,X);				\
-      }								\
-    else							\
-      {								\
-	R##_s = Y##_s;						\
-	_FP_FRAC_COPY_##wc(R,Y);				\
-      }								\
-    R##_c = FP_CLS_NAN;						\
-  } while (0)
-
-/* Obtain the current rounding mode. */
-#ifndef FP_ROUNDMODE
-#define FP_ROUNDMODE	((current_thread_info()->xfsr[0] >> 30) & 0x3)
-#endif
-
-/* Exception flags. */
-#define FP_EX_INVALID		(1 << 4)
-#define FP_EX_OVERFLOW		(1 << 3)
-#define FP_EX_UNDERFLOW		(1 << 2)
-#define FP_EX_DIVZERO		(1 << 1)
-#define FP_EX_INEXACT		(1 << 0)
-
-#define FP_HANDLE_EXCEPTIONS return _fex
-
-#define FP_INHIBIT_RESULTS ((current_thread_info()->xfsr[0] >> 23) & _fex)
-
-#define FP_TRAPPING_EXCEPTIONS ((current_thread_info()->xfsr[0] >> 23) & 0x1f)
-
-#endif
diff --git a/include/asm-sparc64/shmbuf.h b/include/asm-sparc64/shmbuf.h
deleted file mode 100644
index 61c2ef42eba3..000000000000
--- a/include/asm-sparc64/shmbuf.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _SPARC64_SHMBUF_H
-#define _SPARC64_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for sparc64 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 2 miscellaneous 64-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	__kernel_time_t		shm_ctime;	/* last change time */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _SPARC64_SHMBUF_H */
diff --git a/include/asm-sparc64/shmparam.h b/include/asm-sparc64/shmparam.h
deleted file mode 100644
index 1ed0d6701a9b..000000000000
--- a/include/asm-sparc64/shmparam.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASMSPARC64_SHMPARAM_H
-#define _ASMSPARC64_SHMPARAM_H
-
-#include <asm/spitfire.h>
-
-#define __ARCH_FORCE_SHMLBA	1
-/* attach addr a multiple of this */
-#define	SHMLBA	((PAGE_SIZE > L1DCACHE_SIZE) ? PAGE_SIZE : L1DCACHE_SIZE)
-
-#endif /* _ASMSPARC64_SHMPARAM_H */
diff --git a/include/asm-sparc64/sigcontext.h b/include/asm-sparc64/sigcontext.h
deleted file mode 100644
index 1c868d680cfc..000000000000
--- a/include/asm-sparc64/sigcontext.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef __SPARC64_SIGCONTEXT_H
-#define __SPARC64_SIGCONTEXT_H
-
-#ifdef __KERNEL__
-#include <asm/ptrace.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef __KERNEL__
-
-#define __SUNOS_MAXWIN   31
-
-/* This is what SunOS does, so shall I unless we use new 32bit signals or rt signals. */
-struct sigcontext32 {
-	int sigc_onstack;      /* state to restore */
-	int sigc_mask;         /* sigmask to restore */
-	int sigc_sp;           /* stack pointer */
-	int sigc_pc;           /* program counter */
-	int sigc_npc;          /* next program counter */
-	int sigc_psr;          /* for condition codes etc */
-	int sigc_g1;           /* User uses these two registers */
-	int sigc_o0;           /* within the trampoline code. */
-
-	/* Now comes information regarding the users window set
-	 * at the time of the signal.
-	 */
-	int sigc_oswins;       /* outstanding windows */
-
-	/* stack ptrs for each regwin buf */
-	unsigned sigc_spbuf[__SUNOS_MAXWIN];
-
-	/* Windows to restore after signal */
-	struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN];
-};
-
-#endif
-
-#ifdef __KERNEL__
-
-/* This is what we use for 32bit new non-rt signals. */
-
-typedef struct {
-	struct {
-		unsigned int psr;
-		unsigned int pc;
-		unsigned int npc;
-		unsigned int y;
-		unsigned int u_regs[16]; /* globals and ins */
-	}			si_regs;
-	int			si_mask;
-} __siginfo32_t;
-
-#endif
-
-typedef struct {
-	unsigned   int si_float_regs [64];
-	unsigned   long si_fsr;
-	unsigned   long si_gsr;
-	unsigned   long si_fprs;
-} __siginfo_fpu_t;
-
-/* This is what SunOS doesn't, so we have to write this alone
-   and do it properly. */
-struct sigcontext {
-	/* The size of this array has to match SI_MAX_SIZE from siginfo.h */
-	char			sigc_info[128];
-	struct {
-		unsigned long	u_regs[16]; /* globals and ins */
-		unsigned long	tstate;
-		unsigned long	tpc;
-		unsigned long	tnpc;
-		unsigned int	y;
-		unsigned int	fprs;
-	}			sigc_regs;
-	__siginfo_fpu_t *	sigc_fpu_save;
-	struct {
-		void	*	ss_sp;
-		int		ss_flags;
-		unsigned long	ss_size;
-	}			sigc_stack;
-	unsigned long		sigc_mask;
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC64_SIGCONTEXT_H) */
diff --git a/include/asm-sparc64/siginfo.h b/include/asm-sparc64/siginfo.h
deleted file mode 100644
index c96e6c30f8b0..000000000000
--- a/include/asm-sparc64/siginfo.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _SPARC64_SIGINFO_H
-#define _SPARC64_SIGINFO_H
-
-#define SI_PAD_SIZE32	((SI_MAX_SIZE/sizeof(int)) - 3)
-
-#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
-#define __ARCH_SI_TRAPNO
-#define __ARCH_SI_BAND_T int
-
-#include <asm-generic/siginfo.h>
-
-#ifdef __KERNEL__
-
-#include <linux/compat.h>
-
-#ifdef CONFIG_COMPAT
-
-struct compat_siginfo;
-
-#endif /* CONFIG_COMPAT */
-
-#endif /* __KERNEL__ */
-
-#define SI_NOINFO	32767		/* no information in siginfo_t */
-
-/*
- * SIGEMT si_codes
- */
-#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
-#define NSIGEMT		1
-
-#endif
diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h
deleted file mode 100644
index 2a7c7934ac0a..000000000000
--- a/include/asm-sparc64/signal.h
+++ /dev/null
@@ -1,194 +0,0 @@
-#ifndef _ASMSPARC64_SIGNAL_H
-#define _ASMSPARC64_SIGNAL_H
-
-#include <asm/sigcontext.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#include <linux/personality.h>
-#include <linux/types.h>
-#endif
-#endif
-
-/* On the Sparc the signal handlers get passed a 'sub-signal' code
- * for certain signal types, which we document here.
- */
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define    SUBSIG_STACK       0
-#define    SUBSIG_ILLINST     2
-#define    SUBSIG_PRIVINST    3
-#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
-
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-
-#define SIGEMT           7
-#define    SUBSIG_TAG    10
-
-#define SIGFPE		 8
-#define    SUBSIG_FPDISABLED     0x400
-#define    SUBSIG_FPERROR        0x404
-#define    SUBSIG_FPINTOVFL      0x001
-#define    SUBSIG_FPSTSIG        0x002
-#define    SUBSIG_IDIVZERO       0x014
-#define    SUBSIG_FPINEXACT      0x0c4
-#define    SUBSIG_FPDIVZERO      0x0c8
-#define    SUBSIG_FPUNFLOW       0x0cc
-#define    SUBSIG_FPOPERROR      0x0d0
-#define    SUBSIG_FPOVFLOW       0x0d4
-
-#define SIGKILL		 9
-#define SIGBUS          10
-#define    SUBSIG_BUSTIMEOUT    1
-#define    SUBSIG_ALIGNMENT     2
-#define    SUBSIG_MISCERROR     5
-
-#define SIGSEGV		11
-#define    SUBSIG_NOMAPPING     3
-#define    SUBSIG_PROTECTION    4
-#define    SUBSIG_SEGERROR      5
-
-#define SIGSYS		12
-
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGURG          16
-
-/* SunOS values which deviate from the Linux/i386 ones */
-#define SIGSTOP		17
-#define SIGTSTP		18
-#define SIGCONT		19
-#define SIGCHLD		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGIO		23
-#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGLOST		29
-#define SIGPWR		SIGLOST
-#define SIGUSR1		30
-#define SIGUSR2		31
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define __OLD_NSIG	32
-#define __NEW_NSIG      64
-#define _NSIG_BPW     	64
-#define _NSIG_WORDS   	(__NEW_NSIG / _NSIG_BPW)
-
-#define SIGRTMIN       32
-#define SIGRTMAX       __NEW_NSIG
-
-#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
-#define _NSIG			__NEW_NSIG
-#define __new_sigset_t		sigset_t
-#define __new_sigaction		sigaction
-#define __new_sigaction32	sigaction32
-#define __old_sigset_t		old_sigset_t
-#define __old_sigaction		old_sigaction
-#define __old_sigaction32	old_sigaction32
-#else
-#define _NSIG			__OLD_NSIG
-#define NSIG			_NSIG
-#define __old_sigset_t		sigset_t
-#define __old_sigaction		sigaction
-#define __old_sigaction32	sigaction32
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long __old_sigset_t;            /* at least 32 bits */
-
-typedef struct {
-       unsigned long sig[_NSIG_WORDS];
-} __new_sigset_t;
-
-/* A SunOS sigstack */
-struct sigstack {
-	/* XXX 32-bit pointers pinhead XXX */
-	char *the_stack;
-	int   cur_status;
-};
-
-/* Sigvec flags */
-#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
-#define _SV_INTR      2u    /* Sig return should not restart system call */
-#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
-#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
-
-/*
- * sa_flags values: SA_STACK is not currently supported, but will allow the
- * usage of signal stacks by using the (now obsolete) sa_restorer field in
- * the sigaction structure as a stack pointer. This is now possible due to
- * the changes in signal handling. LBT 010493.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- */
-#define SA_NOCLDSTOP	_SV_IGNCHILD
-#define SA_STACK	_SV_SSTACK
-#define SA_ONSTACK	_SV_SSTACK
-#define SA_RESTART	_SV_INTR
-#define SA_ONESHOT	_SV_RESET
-#define SA_NOMASK	0x20u
-#define SA_NOCLDWAIT    0x100u
-#define SA_SIGINFO      0x200u
-
-
-#define SIG_BLOCK          0x01	/* for blocking signals */
-#define SIG_UNBLOCK        0x02	/* for unblocking signals */
-#define SIG_SETMASK        0x04	/* for setting the signal mask */
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	4096
-#define SIGSTKSZ	16384
-
-#include <asm-generic/signal.h>
-
-struct __new_sigaction {
-	__sighandler_t		sa_handler;
-	unsigned long		sa_flags;
-	__sigrestore_t 		sa_restorer;  /* not used by Linux/SPARC yet */
-	__new_sigset_t		sa_mask;
-};
-
-struct __old_sigaction {
-	__sighandler_t  	sa_handler;
-	__old_sigset_t  	sa_mask;
-	unsigned long   	sa_flags;
-	void 			(*sa_restorer)(void);     /* not used by Linux/SPARC yet */
-};
-
-typedef struct sigaltstack {
-	void			__user *ss_sp;
-	int			ss_flags;
-	size_t			ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-struct k_sigaction {
-	struct __new_sigaction 	sa;
-	void __user		*ka_restorer;
-};
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_ASMSPARC64_SIGNAL_H) */
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
deleted file mode 100644
index cd0311b2e19d..000000000000
--- a/include/asm-sparc64/smp.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* smp.h: Sparc64 specific SMP stuff.
- *
- * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_SMP_H
-#define _SPARC64_SMP_H
-
-#include <linux/threads.h>
-#include <asm/asi.h>
-#include <asm/starfire.h>
-#include <asm/spitfire.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/cpumask.h>
-#include <linux/cache.h>
-
-#endif /* !(__ASSEMBLY__) */
-
-#ifdef CONFIG_SMP
-
-#ifndef __ASSEMBLY__
-
-/*
- *	Private routines/data
- */
- 
-#include <linux/bitops.h>
-#include <asm/atomic.h>
-#include <asm/percpu.h>
-
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-extern cpumask_t cpu_core_map[NR_CPUS];
-extern int sparc64_multi_core;
-
-/*
- *	General functions that each host system must provide.
- */
-
-extern int hard_smp_processor_id(void);
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-extern void smp_fill_in_sib_core_maps(void);
-extern void cpu_play_dead(void);
-
-extern void smp_fetch_global_regs(void);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-#endif
-
-#endif /* !(__ASSEMBLY__) */
-
-#else
-
-#define hard_smp_processor_id()		0
-#define smp_fill_in_sib_core_maps() do { } while (0)
-#define smp_fetch_global_regs() do { } while (0)
-
-#endif /* !(CONFIG_SMP) */
-
-#endif /* !(_SPARC64_SMP_H) */
diff --git a/include/asm-sparc64/socket.h b/include/asm-sparc64/socket.h
deleted file mode 100644
index 5af688f56716..000000000000
--- a/include/asm-sparc64/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	0xffff
-
-#define SO_DEBUG	0x0001
-#define SO_PASSCRED	0x0002
-#define SO_REUSEADDR	0x0004
-#define SO_KEEPALIVE	0x0008
-#define SO_DONTROUTE	0x0010
-#define SO_BROADCAST	0x0020
-#define SO_PEERCRED	0x0040
-#define SO_LINGER	0x0080
-#define SO_OOBINLINE	0x0100
-/* To add :#define SO_REUSEPORT 0x0200 */
-#define SO_BSDCOMPAT    0x0400
-#define SO_RCVLOWAT     0x0800
-#define SO_SNDLOWAT     0x1000
-#define SO_RCVTIMEO     0x2000
-#define SO_SNDTIMEO     0x4000
-#define SO_ACCEPTCONN	0x8000
-
-#define SO_SNDBUF	0x1001
-#define SO_RCVBUF	0x1002
-#define SO_SNDBUFFORCE	0x100a
-#define SO_RCVBUFFORCE	0x100b
-#define SO_ERROR	0x1007
-#define SO_TYPE		0x1008
-
-/* Linux specific, keep the same. */
-#define SO_NO_CHECK	0x000b
-#define SO_PRIORITY	0x000c
-
-#define SO_BINDTODEVICE 0x000d
-
-#define SO_ATTACH_FILTER	0x001a
-#define SO_DETACH_FILTER        0x001b
-
-#define SO_PEERNAME		0x001c
-#define SO_TIMESTAMP		0x001d
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_PEERSEC		0x001e
-#define SO_PASSSEC		0x001f
-#define SO_TIMESTAMPNS		0x0021
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		0x5001
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
-#define SO_SECURITY_ENCRYPTION_NETWORK		0x5004
-
-#define SO_MARK			0x0022
-#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-sparc64/sockios.h b/include/asm-sparc64/sockios.h
deleted file mode 100644
index c7d9900638d0..000000000000
--- a/include/asm-sparc64/sockios.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_SPARC64_SOCKIOS_H
-#define _ASM_SPARC64_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* !(_ASM_SPARC64_SOCKIOS_H) */
-
diff --git a/include/asm-sparc64/sparsemem.h b/include/asm-sparc64/sparsemem.h
deleted file mode 100644
index b99d4e4b6d28..000000000000
--- a/include/asm-sparc64/sparsemem.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _SPARC64_SPARSEMEM_H
-#define _SPARC64_SPARSEMEM_H
-
-#ifdef __KERNEL__
-
-#define SECTION_SIZE_BITS       30
-#define MAX_PHYSADDR_BITS       42
-#define MAX_PHYSMEM_BITS        42
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(_SPARC64_SPARSEMEM_H) */
diff --git a/include/asm-sparc64/spinlock.h b/include/asm-sparc64/spinlock.h
deleted file mode 100644
index 0006fe9f8c7a..000000000000
--- a/include/asm-sparc64/spinlock.h
+++ /dev/null
@@ -1,250 +0,0 @@
-/* spinlock.h: 64-bit Sparc spinlock support.
- *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __SPARC64_SPINLOCK_H
-#define __SPARC64_SPINLOCK_H
-
-#include <linux/threads.h>	/* For NR_CPUS */
-
-#ifndef __ASSEMBLY__
-
-/* To get debugging spinlocks which detect and catch
- * deadlock situations, set CONFIG_DEBUG_SPINLOCK
- * and rebuild your kernel.
- */
-
-/* All of these locking primitives are expected to work properly
- * even in an RMO memory model, which currently is what the kernel
- * runs in.
- *
- * There is another issue.  Because we play games to save cycles
- * in the non-contention case, we need to be extra careful about
- * branch targets into the "spinning" code.  They live in their
- * own section, but the newer V9 branches have a shorter range
- * than the traditional 32-bit sparc branch variants.  The rule
- * is that the branches that go into and out of the spinner sections
- * must be pre-V9 branches.
- */
-
-#define __raw_spin_is_locked(lp)	((lp)->lock != 0)
-
-#define __raw_spin_unlock_wait(lp)	\
-	do {	rmb();			\
-	} while((lp)->lock)
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"1:	ldstub		[%1], %0\n"
-"	membar		#StoreLoad | #StoreStore\n"
-"	brnz,pn		%0, 2f\n"
-"	 nop\n"
-"	.subsection	2\n"
-"2:	ldub		[%1], %0\n"
-"	membar		#LoadLoad\n"
-"	brnz,pt		%0, 2b\n"
-"	 nop\n"
-"	ba,a,pt		%%xcc, 1b\n"
-"	.previous"
-	: "=&r" (tmp)
-	: "r" (lock)
-	: "memory");
-}
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-	unsigned long result;
-
-	__asm__ __volatile__(
-"	ldstub		[%1], %0\n"
-"	membar		#StoreLoad | #StoreStore"
-	: "=r" (result)
-	: "r" (lock)
-	: "memory");
-
-	return (result == 0UL);
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-	__asm__ __volatile__(
-"	membar		#StoreStore | #LoadStore\n"
-"	stb		%%g0, [%0]"
-	: /* No outputs */
-	: "r" (lock)
-	: "memory");
-}
-
-static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
-{
-	unsigned long tmp1, tmp2;
-
-	__asm__ __volatile__(
-"1:	ldstub		[%2], %0\n"
-"	membar		#StoreLoad | #StoreStore\n"
-"	brnz,pn		%0, 2f\n"
-"	 nop\n"
-"	.subsection	2\n"
-"2:	rdpr		%%pil, %1\n"
-"	wrpr		%3, %%pil\n"
-"3:	ldub		[%2], %0\n"
-"	membar		#LoadLoad\n"
-"	brnz,pt		%0, 3b\n"
-"	 nop\n"
-"	ba,pt		%%xcc, 1b\n"
-"	 wrpr		%1, %%pil\n"
-"	.previous"
-	: "=&r" (tmp1), "=&r" (tmp2)
-	: "r"(lock), "r"(flags)
-	: "memory");
-}
-
-/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
-
-static void inline __read_lock(raw_rwlock_t *lock)
-{
-	unsigned long tmp1, tmp2;
-
-	__asm__ __volatile__ (
-"1:	ldsw		[%2], %0\n"
-"	brlz,pn		%0, 2f\n"
-"4:	 add		%0, 1, %1\n"
-"	cas		[%2], %0, %1\n"
-"	cmp		%0, %1\n"
-"	membar		#StoreLoad | #StoreStore\n"
-"	bne,pn		%%icc, 1b\n"
-"	 nop\n"
-"	.subsection	2\n"
-"2:	ldsw		[%2], %0\n"
-"	membar		#LoadLoad\n"
-"	brlz,pt		%0, 2b\n"
-"	 nop\n"
-"	ba,a,pt		%%xcc, 4b\n"
-"	.previous"
-	: "=&r" (tmp1), "=&r" (tmp2)
-	: "r" (lock)
-	: "memory");
-}
-
-static int inline __read_trylock(raw_rwlock_t *lock)
-{
-	int tmp1, tmp2;
-
-	__asm__ __volatile__ (
-"1:	ldsw		[%2], %0\n"
-"	brlz,a,pn	%0, 2f\n"
-"	 mov		0, %0\n"
-"	add		%0, 1, %1\n"
-"	cas		[%2], %0, %1\n"
-"	cmp		%0, %1\n"
-"	membar		#StoreLoad | #StoreStore\n"
-"	bne,pn		%%icc, 1b\n"
-"	 mov		1, %0\n"
-"2:"
-	: "=&r" (tmp1), "=&r" (tmp2)
-	: "r" (lock)
-	: "memory");
-
-	return tmp1;
-}
-
-static void inline __read_unlock(raw_rwlock_t *lock)
-{
-	unsigned long tmp1, tmp2;
-
-	__asm__ __volatile__(
-"	membar	#StoreLoad | #LoadLoad\n"
-"1:	lduw	[%2], %0\n"
-"	sub	%0, 1, %1\n"
-"	cas	[%2], %0, %1\n"
-"	cmp	%0, %1\n"
-"	bne,pn	%%xcc, 1b\n"
-"	 nop"
-	: "=&r" (tmp1), "=&r" (tmp2)
-	: "r" (lock)
-	: "memory");
-}
-
-static void inline __write_lock(raw_rwlock_t *lock)
-{
-	unsigned long mask, tmp1, tmp2;
-
-	mask = 0x80000000UL;
-
-	__asm__ __volatile__(
-"1:	lduw		[%2], %0\n"
-"	brnz,pn		%0, 2f\n"
-"4:	 or		%0, %3, %1\n"
-"	cas		[%2], %0, %1\n"
-"	cmp		%0, %1\n"
-"	membar		#StoreLoad | #StoreStore\n"
-"	bne,pn		%%icc, 1b\n"
-"	 nop\n"
-"	.subsection	2\n"
-"2:	lduw		[%2], %0\n"
-"	membar		#LoadLoad\n"
-"	brnz,pt		%0, 2b\n"
-"	 nop\n"
-"	ba,a,pt		%%xcc, 4b\n"
-"	.previous"
-	: "=&r" (tmp1), "=&r" (tmp2)
-	: "r" (lock), "r" (mask)
-	: "memory");
-}
-
-static void inline __write_unlock(raw_rwlock_t *lock)
-{
-	__asm__ __volatile__(
-"	membar		#LoadStore | #StoreStore\n"
-"	stw		%%g0, [%0]"
-	: /* no outputs */
-	: "r" (lock)
-	: "memory");
-}
-
-static int inline __write_trylock(raw_rwlock_t *lock)
-{
-	unsigned long mask, tmp1, tmp2, result;
-
-	mask = 0x80000000UL;
-
-	__asm__ __volatile__(
-"	mov		0, %2\n"
-"1:	lduw		[%3], %0\n"
-"	brnz,pn		%0, 2f\n"
-"	 or		%0, %4, %1\n"
-"	cas		[%3], %0, %1\n"
-"	cmp		%0, %1\n"
-"	membar		#StoreLoad | #StoreStore\n"
-"	bne,pn		%%icc, 1b\n"
-"	 nop\n"
-"	mov		1, %2\n"
-"2:"
-	: "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
-	: "r" (lock), "r" (mask)
-	: "memory");
-
-	return result;
-}
-
-#define __raw_read_lock(p)	__read_lock(p)
-#define __raw_read_trylock(p)	__read_trylock(p)
-#define __raw_read_unlock(p)	__read_unlock(p)
-#define __raw_write_lock(p)	__write_lock(p)
-#define __raw_write_unlock(p)	__write_unlock(p)
-#define __raw_write_trylock(p)	__write_trylock(p)
-
-#define __raw_read_can_lock(rw)		(!((rw)->lock & 0x80000000UL))
-#define __raw_write_can_lock(rw)	(!(rw)->lock)
-
-#define _raw_spin_relax(lock)	cpu_relax()
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC64_SPINLOCK_H) */
diff --git a/include/asm-sparc64/spinlock_types.h b/include/asm-sparc64/spinlock_types.h
deleted file mode 100644
index e128112a0d7c..000000000000
--- a/include/asm-sparc64/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __SPARC64_SPINLOCK_TYPES_H
-#define __SPARC64_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned char lock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile unsigned int lock;
-} raw_rwlock_t;
-
-#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
-
-#endif
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
deleted file mode 100644
index 985ea7e31992..000000000000
--- a/include/asm-sparc64/spitfire.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
- *
- * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_SPITFIRE_H
-#define _SPARC64_SPITFIRE_H
-
-#include <asm/asi.h>
-
-/* The following register addresses are accessible via ASI_DMMU
- * and ASI_IMMU, that is there is a distinct and unique copy of
- * each these registers for each TLB.
- */
-#define TSB_TAG_TARGET		0x0000000000000000 /* All chips				*/
-#define TLB_SFSR		0x0000000000000018 /* All chips				*/
-#define TSB_REG			0x0000000000000028 /* All chips				*/
-#define TLB_TAG_ACCESS		0x0000000000000030 /* All chips				*/
-#define VIRT_WATCHPOINT		0x0000000000000038 /* All chips				*/
-#define PHYS_WATCHPOINT		0x0000000000000040 /* All chips				*/
-#define TSB_EXTENSION_P		0x0000000000000048 /* Ultra-III and later		*/
-#define TSB_EXTENSION_S		0x0000000000000050 /* Ultra-III and later, D-TLB only	*/
-#define TSB_EXTENSION_N		0x0000000000000058 /* Ultra-III and later		*/
-#define TLB_TAG_ACCESS_EXT	0x0000000000000060 /* Ultra-III+ and later		*/
-
-/* These registers only exist as one entity, and are accessed
- * via ASI_DMMU only.
- */
-#define PRIMARY_CONTEXT		0x0000000000000008
-#define SECONDARY_CONTEXT	0x0000000000000010
-#define DMMU_SFAR		0x0000000000000020
-#define VIRT_WATCHPOINT		0x0000000000000038
-#define PHYS_WATCHPOINT		0x0000000000000040
-
-#define SPITFIRE_HIGHEST_LOCKED_TLBENT	(64 - 1)
-#define CHEETAH_HIGHEST_LOCKED_TLBENT	(16 - 1)
-
-#define L1DCACHE_SIZE		0x4000
-
-#define SUN4V_CHIP_INVALID	0x00
-#define SUN4V_CHIP_NIAGARA1	0x01
-#define SUN4V_CHIP_NIAGARA2	0x02
-#define SUN4V_CHIP_UNKNOWN	0xff
-
-#ifndef __ASSEMBLY__
-
-enum ultra_tlb_layout {
-	spitfire = 0,
-	cheetah = 1,
-	cheetah_plus = 2,
-	hypervisor = 3,
-};
-
-extern enum ultra_tlb_layout tlb_type;
-
-extern int sun4v_chip_type;
-
-extern int cheetah_pcache_forced_on;
-extern void cheetah_enable_pcache(void);
-
-#define sparc64_highest_locked_tlbent()	\
-	(tlb_type == spitfire ? \
-	 SPITFIRE_HIGHEST_LOCKED_TLBENT : \
-	 CHEETAH_HIGHEST_LOCKED_TLBENT)
-
-extern int num_kernel_image_mappings;
-
-/* The data cache is write through, so this just invalidates the
- * specified line.
- */
-static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
-}
-
-/* The instruction cache lines are flushed with this, but note that
- * this does not flush the pipeline.  It is possible for a line to
- * get flushed but stale instructions to still be in the pipeline,
- * a flush instruction (to any address) is sufficient to handle
- * this issue after the line is invalidated.
- */
-static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
-}
-
-static inline unsigned long spitfire_get_dtlb_data(int entry)
-{
-	unsigned long data;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (data)
-			     : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS));
-
-	/* Clear TTE diag bits. */
-	data &= ~0x0003fe0000000000UL;
-
-	return data;
-}
-
-static inline unsigned long spitfire_get_dtlb_tag(int entry)
-{
-	unsigned long tag;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (tag)
-			     : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ));
-	return tag;
-}
-
-static inline void spitfire_put_dtlb_data(int entry, unsigned long data)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (data), "r" (entry << 3),
-			       "i" (ASI_DTLB_DATA_ACCESS));
-}
-
-static inline unsigned long spitfire_get_itlb_data(int entry)
-{
-	unsigned long data;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (data)
-			     : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS));
-
-	/* Clear TTE diag bits. */
-	data &= ~0x0003fe0000000000UL;
-
-	return data;
-}
-
-static inline unsigned long spitfire_get_itlb_tag(int entry)
-{
-	unsigned long tag;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (tag)
-			     : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ));
-	return tag;
-}
-
-static inline void spitfire_put_itlb_data(int entry, unsigned long data)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (data), "r" (entry << 3),
-			       "i" (ASI_ITLB_DATA_ACCESS));
-}
-
-static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page)
-{
-	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
-}
-
-static inline void spitfire_flush_itlb_nucleus_page(unsigned long page)
-{
-	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP));
-}
-
-/* Cheetah has "all non-locked" tlb flushes. */
-static inline void cheetah_flush_dtlb_all(void)
-{
-	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (0x80), "i" (ASI_DMMU_DEMAP));
-}
-
-static inline void cheetah_flush_itlb_all(void)
-{
-	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (0x80), "i" (ASI_IMMU_DEMAP));
-}
-
-/* Cheetah has a 4-tlb layout so direct access is a bit different.
- * The first two TLBs are fully assosciative, hold 16 entries, and are
- * used only for locked and >8K sized translations.  One exists for
- * data accesses and one for instruction accesses.
- *
- * The third TLB is for data accesses to 8K non-locked translations, is
- * 2 way assosciative, and holds 512 entries.  The fourth TLB is for
- * instruction accesses to 8K non-locked translations, is 2 way
- * assosciative, and holds 128 entries.
- *
- * Cheetah has some bug where bogus data can be returned from
- * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
- * the problem for me. -DaveM
- */
-static inline unsigned long cheetah_get_ldtlb_data(int entry)
-{
-	unsigned long data;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
-			     "ldxa	[%1] %2, %0"
-			     : "=r" (data)
-			     : "r" ((0 << 16) | (entry << 3)),
-			     "i" (ASI_DTLB_DATA_ACCESS));
-
-	return data;
-}
-
-static inline unsigned long cheetah_get_litlb_data(int entry)
-{
-	unsigned long data;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
-			     "ldxa	[%1] %2, %0"
-			     : "=r" (data)
-			     : "r" ((0 << 16) | (entry << 3)),
-			     "i" (ASI_ITLB_DATA_ACCESS));
-
-	return data;
-}
-
-static inline unsigned long cheetah_get_ldtlb_tag(int entry)
-{
-	unsigned long tag;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (tag)
-			     : "r" ((0 << 16) | (entry << 3)),
-			     "i" (ASI_DTLB_TAG_READ));
-
-	return tag;
-}
-
-static inline unsigned long cheetah_get_litlb_tag(int entry)
-{
-	unsigned long tag;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (tag)
-			     : "r" ((0 << 16) | (entry << 3)),
-			     "i" (ASI_ITLB_TAG_READ));
-
-	return tag;
-}
-
-static inline void cheetah_put_ldtlb_data(int entry, unsigned long data)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (data),
-			       "r" ((0 << 16) | (entry << 3)),
-			       "i" (ASI_DTLB_DATA_ACCESS));
-}
-
-static inline void cheetah_put_litlb_data(int entry, unsigned long data)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (data),
-			       "r" ((0 << 16) | (entry << 3)),
-			       "i" (ASI_ITLB_DATA_ACCESS));
-}
-
-static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb)
-{
-	unsigned long data;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
-			     "ldxa	[%1] %2, %0"
-			     : "=r" (data)
-			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS));
-
-	return data;
-}
-
-static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
-{
-	unsigned long tag;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (tag)
-			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ));
-	return tag;
-}
-
-static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (data),
-			       "r" ((tlb << 16) | (entry << 3)),
-			       "i" (ASI_DTLB_DATA_ACCESS));
-}
-
-static inline unsigned long cheetah_get_itlb_data(int entry)
-{
-	unsigned long data;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
-			     "ldxa	[%1] %2, %0"
-			     : "=r" (data)
-			     : "r" ((2 << 16) | (entry << 3)),
-                               "i" (ASI_ITLB_DATA_ACCESS));
-
-	return data;
-}
-
-static inline unsigned long cheetah_get_itlb_tag(int entry)
-{
-	unsigned long tag;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=r" (tag)
-			     : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ));
-	return tag;
-}
-
-static inline void cheetah_put_itlb_data(int entry, unsigned long data)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* No outputs */
-			     : "r" (data), "r" ((2 << 16) | (entry << 3)),
-			       "i" (ASI_ITLB_DATA_ACCESS));
-}
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC64_SPITFIRE_H) */
diff --git a/include/asm-sparc64/sstate.h b/include/asm-sparc64/sstate.h
deleted file mode 100644
index a7c35dbcb281..000000000000
--- a/include/asm-sparc64/sstate.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _SPARC64_SSTATE_H
-#define _SPARC64_SSTATE_H
-
-extern void sstate_booting(void);
-extern void sstate_running(void);
-extern void sstate_halt(void);
-extern void sstate_poweroff(void);
-extern void sstate_panic(void);
-extern void sstate_reboot(void);
-
-extern void sun4v_sstate_init(void);
-
-#endif /* _SPARC64_SSTATE_H */
diff --git a/include/asm-sparc64/stacktrace.h b/include/asm-sparc64/stacktrace.h
deleted file mode 100644
index 6cee39adf6d6..000000000000
--- a/include/asm-sparc64/stacktrace.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SPARC64_STACKTRACE_H
-#define _SPARC64_STACKTRACE_H
-
-extern void stack_trace_flush(void);
-
-#endif /* _SPARC64_STACKTRACE_H */
diff --git a/include/asm-sparc64/starfire.h b/include/asm-sparc64/starfire.h
deleted file mode 100644
index 07bafd31e33c..000000000000
--- a/include/asm-sparc64/starfire.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * starfire.h: Group all starfire specific code together.
- *
- * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
- */
-
-#ifndef _SPARC64_STARFIRE_H
-#define _SPARC64_STARFIRE_H
-
-#ifndef __ASSEMBLY__
-
-extern int this_is_starfire;
-
-extern void check_if_starfire(void);
-extern void starfire_cpu_setup(void);
-extern int starfire_hard_smp_processor_id(void);
-extern void starfire_hookup(int);
-extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
-
-#endif
-#endif
diff --git a/include/asm-sparc64/stat.h b/include/asm-sparc64/stat.h
deleted file mode 100644
index 9650fdea847f..000000000000
--- a/include/asm-sparc64/stat.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _SPARC64_STAT_H
-#define _SPARC64_STAT_H
-
-#include <linux/types.h>
-
-struct stat {
-	unsigned   st_dev;
-	ino_t   st_ino;
-	mode_t  st_mode;
-	short   st_nlink;
-	uid_t   st_uid;
-	gid_t   st_gid;
-	unsigned   st_rdev;
-	off_t   st_size;
-	time_t  st_atime;
-	time_t  st_mtime;
-	time_t  st_ctime;
-	off_t   st_blksize;
-	off_t   st_blocks;
-	unsigned long  __unused4[2];
-};
-
-struct stat64 {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned long	st_nlink;
-
-	unsigned int	st_mode;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned int	__pad0;
-
-	unsigned long	st_rdev;
-	long		st_size;
-	long		st_blksize;
-	long		st_blocks;
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-	long		__unused[3];
-};
-
-#endif
diff --git a/include/asm-sparc64/statfs.h b/include/asm-sparc64/statfs.h
deleted file mode 100644
index 79b3c890a5fa..000000000000
--- a/include/asm-sparc64/statfs.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _SPARC64_STATFS_H
-#define _SPARC64_STATFS_H
-
-#ifndef __KERNEL_STRICT_NAMES
-
-#include <linux/types.h>
-
-typedef __kernel_fsid_t	fsid_t;
-
-#endif
-
-struct statfs {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct statfs64 {
-	long f_type;
-	long f_bsize;
-	long f_blocks;
-	long f_bfree;
-	long f_bavail;
-	long f_files;
-	long f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_spare[5];
-};
-
-struct compat_statfs64 {
-	__u32 f_type;
-	__u32 f_bsize;
-	__u64 f_blocks;
-	__u64 f_bfree;
-	__u64 f_bavail;
-	__u64 f_files;
-	__u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	__u32 f_namelen;
-	__u32 f_frsize;
-	__u32 f_spare[5];
-};
-
-#endif
diff --git a/include/asm-sparc64/string.h b/include/asm-sparc64/string.h
deleted file mode 100644
index 43161f2d17eb..000000000000
--- a/include/asm-sparc64/string.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * string.h: External definitions for optimized assembly string
- *           routines for the Linux Kernel.
- *
- * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997,1999 Jakub Jelinek (jakub@redhat.com)
- */
-
-#ifndef __SPARC64_STRING_H__
-#define __SPARC64_STRING_H__
-
-/* Really, userland/ksyms should not see any of this stuff. */
-
-#ifdef __KERNEL__
-
-#include <asm/asi.h>
-
-extern void *__memset(void *,int,__kernel_size_t);
-
-#ifndef EXPORT_SYMTAB_STROPS
-
-/* First the mem*() things. */
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMSET
-extern void *__builtin_memset(void *,int,__kernel_size_t);
-
-static inline void *__constant_memset(void *s, int c, __kernel_size_t count)
-{
-	extern __kernel_size_t __bzero(void *, __kernel_size_t);
-
-	if (!c) {
-		__bzero(s, count);
-		return s;
-	} else
-		return __memset(s, c, count);
-}
-
-#undef memset
-#define memset(s, c, count) \
-((__builtin_constant_p(count) && (count) <= 32) ? \
- __builtin_memset((s), (c), (count)) : \
- (__builtin_constant_p(c) ? \
-  __constant_memset((s), (c), (count)) : \
-  __memset((s), (c), (count))))
-
-#define __HAVE_ARCH_MEMSCAN
-
-#undef memscan
-#define memscan(__arg0, __char, __arg2)					\
-({									\
-	extern void *__memscan_zero(void *, size_t);			\
-	extern void *__memscan_generic(void *, int, size_t);		\
-	void *__retval, *__addr = (__arg0);				\
-	size_t __size = (__arg2);					\
-									\
-	if(__builtin_constant_p(__char) && !(__char))			\
-		__retval = __memscan_zero(__addr, __size);		\
-	else								\
-		__retval = __memscan_generic(__addr, (__char), __size);	\
-									\
-	__retval;							\
-})
-
-#define __HAVE_ARCH_MEMCMP
-extern int memcmp(const void *,const void *,__kernel_size_t);
-
-/* Now the str*() stuff... */
-#define __HAVE_ARCH_STRLEN
-extern __kernel_size_t strlen(const char *);
-
-#define __HAVE_ARCH_STRNCMP
-extern int strncmp(const char *, const char *, __kernel_size_t);
-
-#endif /* !EXPORT_SYMTAB_STROPS */
-
-#endif /* __KERNEL__ */
-
-#endif /* !(__SPARC64_STRING_H__) */
diff --git a/include/asm-sparc64/sunbpp.h b/include/asm-sparc64/sunbpp.h
deleted file mode 100644
index 8e171b7a9f4f..000000000000
--- a/include/asm-sparc64/sunbpp.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * include/asm-sparc64/sunbpp.h
- */
-
-#ifndef _ASM_SPARC64_SUNBPP_H
-#define _ASM_SPARC64_SUNBPP_H
-
-struct bpp_regs {
-  /* DMA registers */
-  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
-  __volatile__ __u32 p_addr;		/* Address Register */
-  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
-  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
-  /* Parallel Port registers */
-  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
-  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
-  __volatile__ __u8 p_dr;		/* Parallel Data Register */
-  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
-  __volatile__ __u8 p_or;		/* Output Register */
-  __volatile__ __u8 p_ir;		/* Input Register */
-  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
-};
-
-/* P_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
-#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
-#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
-
-/* P_OCR. */
-#define P_OCR_MEM_CLR   0x8000
-#define P_OCR_DATA_SRC  0x4000      /* )                  */
-#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
-#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
-#define P_OCR_ACK_DSEL  0x0800      /* )                  */
-#define P_OCR_EN_DIAG   0x0400
-#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
-#define P_OCR_ACK_OP    0x0100      /* Ack operation */
-#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
-
-/* P_TCR */
-#define P_TCR_DIR       0x08
-#define P_TCR_BUSY      0x04
-#define P_TCR_ACK       0x02
-#define P_TCR_DS        0x01        /* Strobe */
-
-/* P_OR */
-#define P_OR_V3         0x20        /* )                 */
-#define P_OR_V2         0x10        /* ) on Zebra only   */
-#define P_OR_V1         0x08        /* )                 */
-#define P_OR_INIT       0x04
-#define P_OR_AFXN       0x02        /* Auto Feed */
-#define P_OR_SLCT_IN    0x01
-
-/* P_IR */
-#define P_IR_PE         0x04
-#define P_IR_SLCT       0x02
-#define P_IR_ERR        0x01
-
-/* P_ICR */
-#define P_DS_IRQ        0x8000      /* RW1  */
-#define P_ACK_IRQ       0x4000      /* RW1  */
-#define P_BUSY_IRQ      0x2000      /* RW1  */
-#define P_PE_IRQ        0x1000      /* RW1  */
-#define P_SLCT_IRQ      0x0800      /* RW1  */
-#define P_ERR_IRQ       0x0400      /* RW1  */
-#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
-#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
-#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
-#define P_BUSY_IRQ_EN   0x0040      /* RW   */
-#define P_PE_IRP        0x0020      /* RW   1= rising edge */
-#define P_PE_IRQ_EN     0x0010      /* RW   */
-#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
-#define P_SLCT_IRQ_EN   0x0004      /* RW   */
-#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
-#define P_ERR_IRQ_EN    0x0001      /* RW   */
-
-#endif /* !(_ASM_SPARC64_SUNBPP_H) */
diff --git a/include/asm-sparc64/syscalls.h b/include/asm-sparc64/syscalls.h
deleted file mode 100644
index 45a43f637a14..000000000000
--- a/include/asm-sparc64/syscalls.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _SPARC64_SYSCALLS_H
-#define _SPARC64_SYSCALLS_H
-
-struct pt_regs;
-
-extern asmlinkage long sparc_do_fork(unsigned long clone_flags,
-				     unsigned long stack_start,
-				     struct pt_regs *regs,
-				     unsigned long stack_size);
-
-extern asmlinkage int sparc_execve(struct pt_regs *regs);
-
-#endif /* _SPARC64_SYSCALLS_H */
diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
deleted file mode 100644
index 6897ac31be41..000000000000
--- a/include/asm-sparc64/system.h
+++ /dev/null
@@ -1,355 +0,0 @@
-#ifndef __SPARC64_SYSTEM_H
-#define __SPARC64_SYSTEM_H
-
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/visasm.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/irqflags.h>
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * Sparc (general) CPU types
- */
-enum sparc_cpu {
-  sun4        = 0x00,
-  sun4c       = 0x01,
-  sun4m       = 0x02,
-  sun4d       = 0x03,
-  sun4e       = 0x04,
-  sun4u       = 0x05, /* V8 ploos ploos */
-  sun_unknown = 0x06,
-  ap1000      = 0x07, /* almost a sun4m */
-};
-                  
-#define sparc_cpu_model sun4u
-
-/* This cannot ever be a sun4c nor sun4 :) That's just history. */
-#define ARCH_SUN4C_SUN4 0
-#define ARCH_SUN4 0
-
-extern char reboot_command[];
-
-/* These are here in an effort to more fully work around Spitfire Errata
- * #51.  Essentially, if a memory barrier occurs soon after a mispredicted
- * branch, the chip can stop executing instructions until a trap occurs.
- * Therefore, if interrupts are disabled, the chip can hang forever.
- *
- * It used to be believed that the memory barrier had to be right in the
- * delay slot, but a case has been traced recently wherein the memory barrier
- * was one instruction after the branch delay slot and the chip still hung.
- * The offending sequence was the following in sym_wakeup_done() of the
- * sym53c8xx_2 driver:
- *
- *	call	sym_ccb_from_dsa, 0
- *	 movge	%icc, 0, %l0
- *	brz,pn	%o0, .LL1303
- *	 mov	%o0, %l2
- *	membar	#LoadLoad
- *
- * The branch has to be mispredicted for the bug to occur.  Therefore, we put
- * the memory barrier explicitly into a "branch always, predicted taken"
- * delay slot to avoid the problem case.
- */
-#define membar_safe(type) \
-do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
-			     " membar	" type "\n" \
-			     "1:\n" \
-			     : : : "memory"); \
-} while (0)
-
-#define mb()	\
-	membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
-#define rmb()	\
-	membar_safe("#LoadLoad")
-#define wmb()	\
-	membar_safe("#StoreStore")
-#define membar_storeload() \
-	membar_safe("#StoreLoad")
-#define membar_storeload_storestore() \
-	membar_safe("#StoreLoad | #StoreStore")
-#define membar_storeload_loadload() \
-	membar_safe("#StoreLoad | #LoadLoad")
-#define membar_storestore_loadstore() \
-	membar_safe("#StoreStore | #LoadStore")
-
-#endif
-
-#define nop() 		__asm__ __volatile__ ("nop")
-
-#define read_barrier_depends()		do { } while(0)
-#define set_mb(__var, __value) \
-	do { __var = __value; membar_storeload_storestore(); } while(0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#else
-#define smp_mb()	__asm__ __volatile__("":::"memory")
-#define smp_rmb()	__asm__ __volatile__("":::"memory")
-#define smp_wmb()	__asm__ __volatile__("":::"memory")
-#define smp_read_barrier_depends()	do { } while(0)
-#endif
-
-#define flushi(addr)	__asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
-
-#define flushw_all()	__asm__ __volatile__("flushw")
-
-/* Performance counter register access. */
-#define read_pcr(__p)  __asm__ __volatile__("rd	%%pcr, %0" : "=r" (__p))
-#define write_pcr(__p) __asm__ __volatile__("wr	%0, 0x0, %%pcr" : : "r" (__p))
-#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
-
-/* Blackbird errata workaround.  See commentary in
- * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
- * for more information.
- */
-#define reset_pic()    						\
-	__asm__ __volatile__("ba,pt	%xcc, 99f\n\t"		\
-			     ".align	64\n"			\
-			  "99:wr	%g0, 0x0, %pic\n\t"	\
-			     "rd	%pic, %g0")
-
-#ifndef __ASSEMBLY__
-
-extern void sun_do_break(void);
-extern int stop_a_enabled;
-
-extern void fault_in_user_windows(void);
-extern void synchronize_user_stack(void);
-
-extern void __flushw_user(void);
-#define flushw_user() __flushw_user()
-
-#define flush_user_windows flushw_user
-#define flush_register_windows flushw_all
-
-/* Don't hold the runqueue lock over context switch */
-#define __ARCH_WANT_UNLOCKED_CTXSW
-#define prepare_arch_switch(next)		\
-do {						\
-	flushw_all();				\
-} while (0)
-
-	/* See what happens when you design the chip correctly?
-	 *
-	 * We tell gcc we clobber all non-fixed-usage registers except
-	 * for l0/l1.  It will use one for 'next' and the other to hold
-	 * the output value of 'last'.  'next' is not referenced again
-	 * past the invocation of switch_to in the scheduler, so we need
-	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
-	 * and 2 stores in this critical code path.  -DaveM
-	 */
-#define switch_to(prev, next, last)					\
-do {	if (test_thread_flag(TIF_PERFCTR)) {				\
-		unsigned long __tmp;					\
-		read_pcr(__tmp);					\
-		current_thread_info()->pcr_reg = __tmp;			\
-		read_pic(__tmp);					\
-		current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
-		current_thread_info()->kernel_cntd1 += ((__tmp) >> 32);	\
-	}								\
-	flush_tlb_pending();						\
-	save_and_clear_fpu();						\
-	/* If you are tempted to conditionalize the following */	\
-	/* so that ASI is only written if it changes, think again. */	\
-	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
-	: : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
-	trap_block[current_thread_info()->cpu].thread =			\
-		task_thread_info(next);					\
-	__asm__ __volatile__(						\
-	"mov	%%g4, %%g7\n\t"						\
-	"stx	%%i6, [%%sp + 2047 + 0x70]\n\t"				\
-	"stx	%%i7, [%%sp + 2047 + 0x78]\n\t"				\
-	"rdpr	%%wstate, %%o5\n\t"					\
-	"stx	%%o6, [%%g6 + %6]\n\t"					\
-	"stb	%%o5, [%%g6 + %5]\n\t"					\
-	"rdpr	%%cwp, %%o5\n\t"					\
-	"stb	%%o5, [%%g6 + %8]\n\t"					\
-	"mov	%4, %%g6\n\t"						\
-	"ldub	[%4 + %8], %%g1\n\t"					\
-	"wrpr	%%g1, %%cwp\n\t"					\
-	"ldx	[%%g6 + %6], %%o6\n\t"					\
-	"ldub	[%%g6 + %5], %%o5\n\t"					\
-	"ldub	[%%g6 + %7], %%o7\n\t"					\
-	"wrpr	%%o5, 0x0, %%wstate\n\t"				\
-	"ldx	[%%sp + 2047 + 0x70], %%i6\n\t"				\
-	"ldx	[%%sp + 2047 + 0x78], %%i7\n\t"				\
-	"ldx	[%%g6 + %9], %%g4\n\t"					\
-	"brz,pt %%o7, switch_to_pc\n\t"					\
-	" mov	%%g7, %0\n\t"						\
-	"sethi	%%hi(ret_from_syscall), %%g1\n\t"			\
-	"jmpl	%%g1 + %%lo(ret_from_syscall), %%g0\n\t"		\
-	" nop\n\t"							\
-	".globl switch_to_pc\n\t"					\
-	"switch_to_pc:\n\t"						\
-	: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg),	\
-	  "=r" (__local_per_cpu_offset)					\
-	: "0" (task_thread_info(next)),					\
-	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD),            \
-	  "i" (TI_CWP), "i" (TI_TASK)					\
-	: "cc",								\
-	        "g1", "g2", "g3",                   "g7",		\
-	        "l1", "l2", "l3", "l4", "l5", "l6", "l7",		\
-	  "i0", "i1", "i2", "i3", "i4", "i5",				\
-	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7");		\
-	/* If you fuck with this, update ret_from_syscall code too. */	\
-	if (test_thread_flag(TIF_PERFCTR)) {				\
-		write_pcr(current_thread_info()->pcr_reg);		\
-		reset_pic();						\
-	}								\
-} while(0)
-
-static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
-{
-	unsigned long tmp1, tmp2;
-
-	__asm__ __volatile__(
-"	membar		#StoreLoad | #LoadLoad\n"
-"	mov		%0, %1\n"
-"1:	lduw		[%4], %2\n"
-"	cas		[%4], %2, %0\n"
-"	cmp		%2, %0\n"
-"	bne,a,pn	%%icc, 1b\n"
-"	 mov		%1, %0\n"
-"	membar		#StoreLoad | #StoreStore\n"
-	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
-	: "0" (val), "r" (m)
-	: "cc", "memory");
-	return val;
-}
-
-static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
-{
-	unsigned long tmp1, tmp2;
-
-	__asm__ __volatile__(
-"	membar		#StoreLoad | #LoadLoad\n"
-"	mov		%0, %1\n"
-"1:	ldx		[%4], %2\n"
-"	casx		[%4], %2, %0\n"
-"	cmp		%2, %0\n"
-"	bne,a,pn	%%xcc, 1b\n"
-"	 mov		%1, %0\n"
-"	membar		#StoreLoad | #StoreStore\n"
-	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
-	: "0" (val), "r" (m)
-	: "cc", "memory");
-	return val;
-}
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-extern void __xchg_called_with_bad_pointer(void);
-
-static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
-				       int size)
-{
-	switch (size) {
-	case 4:
-		return xchg32(ptr, x);
-	case 8:
-		return xchg64(ptr, x);
-	};
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
-
-/* 
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long
-__cmpxchg_u32(volatile int *m, int old, int new)
-{
-	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
-			     "cas [%2], %3, %0\n\t"
-			     "membar #StoreLoad | #StoreStore"
-			     : "=&r" (new)
-			     : "0" (new), "r" (m), "r" (old)
-			     : "memory");
-
-	return new;
-}
-
-static inline unsigned long
-__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
-{
-	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
-			     "casx [%2], %3, %0\n\t"
-			     "membar #StoreLoad | #StoreStore"
-			     : "=&r" (new)
-			     : "0" (new), "r" (m), "r" (old)
-			     : "memory");
-
-	return new;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
-{
-	switch (size) {
-		case 4:
-			return __cmpxchg_u32(ptr, old, new);
-		case 8:
-			return __cmpxchg_u64(ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#define cmpxchg(ptr,o,n)						 \
-  ({									 \
-     __typeof__(*(ptr)) _o_ = (o);					 \
-     __typeof__(*(ptr)) _n_ = (n);					 \
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
-				    (unsigned long)_n_, sizeof(*(ptr))); \
-  })
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-				      unsigned long old,
-				      unsigned long new, int size)
-{
-	switch (size) {
-	case 4:
-	case 8:	return __cmpxchg(ptr, old, new, size);
-	default:
-		return __cmpxchg_local_generic(ptr, old, new, size);
-	}
-
-	return old;
-}
-
-#define cmpxchg_local(ptr, o, n)				  	\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-
-#endif /* !(__ASSEMBLY__) */
-
-#define arch_align_stack(x) (x)
-
-#endif /* !(__SPARC64_SYSTEM_H) */
diff --git a/include/asm-sparc64/termbits.h b/include/asm-sparc64/termbits.h
deleted file mode 100644
index ebe31c152f16..000000000000
--- a/include/asm-sparc64/termbits.h
+++ /dev/null
@@ -1,260 +0,0 @@
-#ifndef _SPARC64_TERMBITS_H
-#define _SPARC64_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char   cc_t;
-typedef unsigned int    speed_t;
-typedef unsigned int    tcflag_t;
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#define NCCS 17
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-#ifdef __KERNEL__
-#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
-	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
-#endif
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t _x_cc[2];                  /* padding to match ktermios */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR    0
-#define VQUIT    1
-#define VERASE   2
-#define VKILL    3
-#define VEOF     4
-#define VEOL     5
-#define VEOL2    6
-#define VSWTC    7
-#define VSTART   8
-#define VSTOP    9
-
-
-
-#define VSUSP    10
-#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE  14
-#define VLNEXT   15
-
-/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
- * shared with eof/eol
- */
-#ifdef __KERNEL__
-#define VMIN     16
-#define VTIME    17
-#else
-#define VMIN     VEOF
-#define VTIME    VEOL
-#endif
-
-/* c_iflag bits */
-#define IGNBRK	0x00000001
-#define BRKINT	0x00000002
-#define IGNPAR	0x00000004
-#define PARMRK	0x00000008
-#define INPCK	0x00000010
-#define ISTRIP	0x00000020
-#define INLCR	0x00000040
-#define IGNCR	0x00000080
-#define ICRNL	0x00000100
-#define IUCLC	0x00000200
-#define IXON	0x00000400
-#define IXANY	0x00000800
-#define IXOFF	0x00001000
-#define IMAXBEL	0x00002000
-#define IUTF8	0x00004000
-
-/* c_oflag bits */
-#define OPOST	0x00000001
-#define OLCUC	0x00000002
-#define ONLCR	0x00000004
-#define OCRNL	0x00000008
-#define ONOCR	0x00000010
-#define ONLRET	0x00000020
-#define OFILL	0x00000040
-#define OFDEL	0x00000080
-#define NLDLY	0x00000100
-#define   NL0	0x00000000
-#define   NL1	0x00000100
-#define CRDLY	0x00000600
-#define   CR0	0x00000000
-#define   CR1	0x00000200
-#define   CR2	0x00000400
-#define   CR3	0x00000600
-#define TABDLY	0x00001800
-#define   TAB0	0x00000000
-#define   TAB1	0x00000800
-#define   TAB2	0x00001000
-#define   TAB3	0x00001800
-#define   XTABS	0x00001800
-#define BSDLY	0x00002000
-#define   BS0	0x00000000
-#define   BS1	0x00002000
-#define VTDLY	0x00004000
-#define   VT0	0x00000000
-#define   VT1	0x00004000
-#define FFDLY	0x00008000
-#define   FF0	0x00000000
-#define   FF1	0x00008000
-#define PAGEOUT 0x00010000  /* SUNOS specific */
-#define WRAP    0x00020000  /* SUNOS specific */
-
-/* c_cflag bit meaning */
-#define CBAUD	  0x0000100f
-#define  B0	  0x00000000   /* hang up */
-#define  B50	  0x00000001
-#define  B75	  0x00000002
-#define  B110	  0x00000003
-#define  B134	  0x00000004
-#define  B150	  0x00000005
-#define  B200	  0x00000006
-#define  B300	  0x00000007
-#define  B600	  0x00000008
-#define  B1200	  0x00000009
-#define  B1800	  0x0000000a
-#define  B2400	  0x0000000b
-#define  B4800	  0x0000000c
-#define  B9600	  0x0000000d
-#define  B19200	  0x0000000e
-#define  B38400	  0x0000000f
-#define EXTA      B19200
-#define EXTB      B38400
-#define  CSIZE    0x00000030
-#define   CS5	  0x00000000
-#define   CS6	  0x00000010
-#define   CS7	  0x00000020
-#define   CS8	  0x00000030
-#define CSTOPB	  0x00000040
-#define CREAD	  0x00000080
-#define PARENB	  0x00000100
-#define PARODD	  0x00000200
-#define HUPCL	  0x00000400
-#define CLOCAL	  0x00000800
-#define CBAUDEX   0x00001000
-#define  BOTHER   0x00001000
-#define  B57600   0x00001001
-#define  B115200  0x00001002
-#define  B230400  0x00001003
-#define  B460800  0x00001004
-/* This is what we can do with the Zilogs. */
-#define  B76800   0x00001005
-/* This is what we can do with the SAB82532. */
-#define  B153600  0x00001006
-#define  B307200  0x00001007
-#define  B614400  0x00001008
-#define  B921600  0x00001009
-/* And these are the rest... */
-#define  B500000  0x0000100a
-#define  B576000  0x0000100b
-#define B1000000  0x0000100c
-#define B1152000  0x0000100d
-#define B1500000  0x0000100e
-#define B2000000  0x0000100f
-/* These have totally bogus values and nobody uses them
-   so far. Later on we'd have to use say 0x10000x and
-   adjust CBAUD constant and drivers accordingly.
-#define B2500000  0x00001010
-#define B3000000  0x00001011
-#define B3500000  0x00001012
-#define B4000000  0x00001013  */
-#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
-#define CMSPAR    0x40000000  /* mark or space (stick) parity */
-#define CRTSCTS	  0x80000000  /* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0x00000001
-#define ICANON	0x00000002
-#define XCASE	0x00000004
-#define ECHO	0x00000008
-#define ECHOE	0x00000010
-#define ECHOK	0x00000020
-#define ECHONL	0x00000040
-#define NOFLSH	0x00000080
-#define TOSTOP	0x00000100
-#define ECHOCTL	0x00000200
-#define ECHOPRT	0x00000400
-#define ECHOKE	0x00000800
-#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
-#define FLUSHO	0x00002000
-#define PENDIN	0x00004000
-#define IEXTEN	0x00008000
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* !(_SPARC64_TERMBITS_H) */
diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h
deleted file mode 100644
index 1f5dab25dda5..000000000000
--- a/include/asm-sparc64/termios.h
+++ /dev/null
@@ -1,186 +0,0 @@
-#ifndef _SPARC64_TERMIOS_H
-#define _SPARC64_TERMIOS_H
-
-#include <asm/ioctls.h>
-#include <asm/termbits.h>
-
-#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
-struct sgttyb {
-	char	sg_ispeed;
-	char	sg_ospeed;
-	char	sg_erase;
-	char	sg_kill;
-	short	sg_flags;
-};
-
-struct tchars {
-	char	t_intrc;
-	char	t_quitc;
-	char	t_startc;
-	char	t_stopc;
-	char	t_eofc;
-	char	t_brkc;
-};
-
-struct ltchars {
-	char	t_suspc;
-	char	t_dsuspc;
-	char	t_rprntc;
-	char	t_flushc;
-	char	t_werasc;
-	char	t_lnextc;
-};
-#endif /* __KERNEL__ */
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#ifdef __KERNEL__
-#include <linux/module.h>
-
-/*
- * c_cc characters in the termio structure.  Oh, how I love being
- * backwardly compatible.  Notice that character 4 and 5 are
- * interpreted differently depending on whether ICANON is set in
- * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
- * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
- * is compatible with sysV)...
- */
-#define _VMIN	4
-#define _VTIME	5
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		eol=\0		eol2=\0		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		dsusp=^Y
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	vmin=\1         vtime=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	unsigned short tmp; \
-	int err; \
-	err = get_user(tmp, &(termio)->c_iflag); \
-	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
-	err |= get_user(tmp, &(termio)->c_oflag); \
-	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
-	err |= get_user(tmp, &(termio)->c_cflag); \
-	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
-	err |= get_user(tmp, &(termio)->c_lflag); \
-	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
-	err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-	err; \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- *
- * Note the "fun" _VMIN overloading.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	int err; \
-	err  = put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	err |= put_user((termios)->c_line,  &(termio)->c_line); \
-	err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-	if (!((termios)->c_lflag & ICANON)) { \
-		err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
-		err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
-	} \
-	err; \
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-({ \
-	int err; \
-	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
-	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
-	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
-	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
-	err |= get_user((k)->c_line,  &(u)->c_line); \
-	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
-	if((k)->c_lflag & ICANON) { \
-		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} else { \
-		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} \
-	err |= get_user((k)->c_ispeed,  &(u)->c_ispeed); \
-	err |= get_user((k)->c_ospeed,  &(u)->c_ospeed); \
-	err; \
-})
-
-#define kernel_termios_to_user_termios(u, k) \
-({ \
-	int err; \
-	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
-	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
-	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
-	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
-	err |= put_user((k)->c_line, &(u)->c_line); \
-	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
-	if(!((k)->c_lflag & ICANON)) { \
-		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} else { \
-		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} \
-	err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \
-	err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \
-	err; \
-})
-
-#define user_termios_to_kernel_termios_1(k, u) \
-({ \
-	int err; \
-	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
-	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
-	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
-	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
-	err |= get_user((k)->c_line,  &(u)->c_line); \
-	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
-	if((k)->c_lflag & ICANON) { \
-		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} else { \
-		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} \
-	err; \
-})
-
-#define kernel_termios_to_user_termios_1(u, k) \
-({ \
-	int err; \
-	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
-	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
-	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
-	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
-	err |= put_user((k)->c_line, &(u)->c_line); \
-	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
-	if(!((k)->c_lflag & ICANON)) { \
-		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
-		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
-	} else { \
-		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
-		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
-	} \
-	err; \
-})
-
-#endif	/* __KERNEL__ */
-
-#endif /* _SPARC64_TERMIOS_H */
diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h
deleted file mode 100644
index e5873e385306..000000000000
--- a/include/asm-sparc64/thread_info.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/* thread_info.h: sparc64 low-level thread information
- *
- * Copyright (C) 2002  David S. Miller (davem@redhat.com)
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#define NSWINS		7
-
-#define TI_FLAG_BYTE_FAULT_CODE		0
-#define TI_FLAG_FAULT_CODE_SHIFT	56
-#define TI_FLAG_BYTE_WSTATE		1
-#define TI_FLAG_WSTATE_SHIFT		48
-#define TI_FLAG_BYTE_CWP		2
-#define TI_FLAG_CWP_SHIFT		40
-#define TI_FLAG_BYTE_CURRENT_DS		3
-#define TI_FLAG_CURRENT_DS_SHIFT	32
-#define TI_FLAG_BYTE_FPDEPTH		4
-#define TI_FLAG_FPDEPTH_SHIFT		24
-#define TI_FLAG_BYTE_WSAVED		5
-#define TI_FLAG_WSAVED_SHIFT		16
-
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-struct task_struct;
-struct exec_domain;
-
-struct thread_info {
-	/* D$ line 1 */
-	struct task_struct	*task;
-	unsigned long		flags;
-	__u8			fpsaved[7];
-	__u8			status;
-	unsigned long		ksp;
-
-	/* D$ line 2 */
-	unsigned long		fault_address;
-	struct pt_regs		*kregs;
-	struct exec_domain	*exec_domain;
-	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
-	__u8			new_child;
-	__u8			syscall_noerror;
-	__u16			cpu;
-
-	unsigned long		*utraps;
-
-	struct reg_window 	reg_window[NSWINS];
-	unsigned long 		rwbuf_stkptrs[NSWINS];
-
-	unsigned long		gsr[7];
-	unsigned long		xfsr[7];
-
-	__u64			__user *user_cntd0;
-	__u64			__user *user_cntd1;
-	__u64			kernel_cntd0, kernel_cntd1;
-	__u64			pcr_reg;
-
-	struct restart_block	restart_block;
-
-	struct pt_regs		*kern_una_regs;
-	unsigned int		kern_una_insn;
-
-	unsigned long		fpregs[0] __attribute__ ((aligned(64)));
-};
-
-#endif /* !(__ASSEMBLY__) */
-
-/* offsets into the thread_info struct for assembly code access */
-#define TI_TASK		0x00000000
-#define TI_FLAGS	0x00000008
-#define TI_FAULT_CODE	(TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
-#define TI_WSTATE	(TI_FLAGS + TI_FLAG_BYTE_WSTATE)
-#define TI_CWP		(TI_FLAGS + TI_FLAG_BYTE_CWP)
-#define TI_CURRENT_DS	(TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
-#define TI_FPDEPTH	(TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
-#define TI_WSAVED	(TI_FLAGS + TI_FLAG_BYTE_WSAVED)
-#define TI_FPSAVED	0x00000010
-#define TI_KSP		0x00000018
-#define TI_FAULT_ADDR	0x00000020
-#define TI_KREGS	0x00000028
-#define TI_EXEC_DOMAIN	0x00000030
-#define TI_PRE_COUNT	0x00000038
-#define TI_NEW_CHILD	0x0000003c
-#define TI_SYS_NOERROR	0x0000003d
-#define TI_CPU		0x0000003e
-#define TI_UTRAPS	0x00000040
-#define TI_REG_WINDOW	0x00000048
-#define TI_RWIN_SPTRS	0x000003c8	
-#define TI_GSR		0x00000400
-#define TI_XFSR		0x00000438
-#define TI_USER_CNTD0	0x00000470
-#define TI_USER_CNTD1	0x00000478
-#define TI_KERN_CNTD0	0x00000480
-#define TI_KERN_CNTD1	0x00000488
-#define TI_PCR		0x00000490
-#define TI_RESTART_BLOCK 0x00000498
-#define TI_KUNA_REGS	0x000004c0
-#define TI_KUNA_INSN	0x000004c8
-#define TI_FPREGS	0x00000500
-
-/* We embed this in the uppermost byte of thread_info->flags */
-#define FAULT_CODE_WRITE	0x01	/* Write access, implies D-TLB	   */
-#define FAULT_CODE_DTLB		0x02	/* Miss happened in D-TLB	   */
-#define FAULT_CODE_ITLB		0x04	/* Miss happened in I-TLB	   */
-#define FAULT_CODE_WINFIXUP	0x08	/* Miss happened during spill/fill */
-#define FAULT_CODE_BLKCOMMIT	0x10	/* Use blk-commit ASI in copy_page */
-
-#if PAGE_SHIFT == 13
-#define THREAD_SIZE (2*PAGE_SIZE)
-#define THREAD_SHIFT (PAGE_SHIFT + 1)
-#else /* PAGE_SHIFT == 13 */
-#define THREAD_SIZE PAGE_SIZE
-#define THREAD_SHIFT PAGE_SHIFT
-#endif /* PAGE_SHIFT == 13 */
-
-#define PREEMPT_ACTIVE		0x4000000
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-
-#define INIT_THREAD_INFO(tsk)				\
-{							\
-	.task		=	&tsk,			\
-	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
-	.exec_domain	=	&default_exec_domain,	\
-	.preempt_count	=	1,			\
-	.restart_block	= {				\
-		.fn	=	do_no_restart_syscall,	\
-	},						\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-register struct thread_info *current_thread_info_reg asm("g6");
-#define current_thread_info()	(current_thread_info_reg)
-
-/* thread information allocation */
-#if PAGE_SHIFT == 13
-#define __THREAD_INFO_ORDER	1
-#else /* PAGE_SHIFT == 13 */
-#define __THREAD_INFO_ORDER	0
-#endif /* PAGE_SHIFT == 13 */
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk)					\
-({								\
-	struct thread_info *ret;				\
-								\
-	ret = (struct thread_info *)				\
-	  __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);	\
-	if (ret)						\
-		memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER);	\
-	ret;							\
-})
-#else
-#define alloc_thread_info(tsk) \
-	((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
-#endif
-
-#define free_thread_info(ti) \
-	free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
-
-#define __thread_flag_byte_ptr(ti)	\
-	((unsigned char *)(&((ti)->flags)))
-#define __cur_thread_flag_byte_ptr	__thread_flag_byte_ptr(current_thread_info())
-
-#define get_thread_fault_code()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
-#define set_thread_fault_code(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
-#define get_thread_wstate()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
-#define set_thread_wstate(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
-#define get_thread_cwp()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
-#define set_thread_cwp(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
-#define get_thread_current_ds()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
-#define set_thread_current_ds(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
-#define get_thread_fpdepth()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
-#define set_thread_fpdepth(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
-#define get_thread_wsaved()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
-#define set_thread_wsaved(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
-
-#endif /* !(__ASSEMBLY__) */
-
-/*
- * Thread information flags, only 16 bits are available as we encode
- * other values into the upper 6 bytes.
- *
- * On trap return we need to test several values:
- *
- * user:	need_resched, notify_resume, sigpending, wsaved, perfctr
- * kernel:	fpdepth
- *
- * So to check for work in the kernel case we simply load the fpdepth
- * byte out of the flags and test it.  For the user case we encode the
- * lower 3 bytes of flags as follows:
- *	----------------------------------------
- *	| wsaved | flags byte 1 | flags byte 2 |
- *	----------------------------------------
- * This optimizes the user test into:
- *	ldx		[%g6 + TI_FLAGS], REG1
- *	sethi		%hi(_TIF_USER_WORK_MASK), REG2
- *	or		REG2, %lo(_TIF_USER_WORK_MASK), REG2
- *	andcc		REG1, REG2, %g0
- *	be,pt		no_work_to_do
- *	 nop
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-/* flags bit 1 is available */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_PERFCTR		4	/* performance counters active */
-#define TIF_UNALIGNED		5	/* allowed to do unaligned accesses */
-/* flag bit 6 is available */
-#define TIF_32BIT		7	/* 32-bit binary */
-/* flag bit 8 is available */
-#define TIF_SECCOMP		9	/* secure computing */
-#define TIF_SYSCALL_AUDIT	10	/* syscall auditing active */
-/* flag bit 11 is available */
-/* NOTE: Thread flags >= 12 should be ones we have no interest
- *       in using in assembly, else we can't use the mask as
- *       an immediate value in instructions such as andcc.
- */
-#define TIF_ABI_PENDING		12
-#define TIF_MEMDIE		13
-#define TIF_POLLING_NRFLAG	14
-
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_PERFCTR		(1<<TIF_PERFCTR)
-#define _TIF_UNALIGNED		(1<<TIF_UNALIGNED)
-#define _TIF_32BIT		(1<<TIF_32BIT)
-#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
-#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
-#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-
-#define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
-				 (_TIF_SIGPENDING | \
-				  _TIF_NEED_RESCHED | _TIF_PERFCTR))
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- *
- * Note that there are only 8 bits available.
- */
-#define TS_RESTORE_SIGMASK	0x0001	/* restore signal mask in do_signal() */
-
-#ifndef __ASSEMBLY__
-#define HAVE_SET_RESTORE_SIGMASK	1
-static inline void set_restore_sigmask(void)
-{
-	struct thread_info *ti = current_thread_info();
-	ti->status |= TS_RESTORE_SIGMASK;
-	set_bit(TIF_SIGPENDING, &ti->flags);
-}
-#endif	/* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc64/timer.h b/include/asm-sparc64/timer.h
deleted file mode 100644
index 5b779fd1f788..000000000000
--- a/include/asm-sparc64/timer.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* timer.h: System timer definitions for sun5.
- *
- * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
- */
-
-#ifndef _SPARC64_TIMER_H
-#define _SPARC64_TIMER_H
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-struct sparc64_tick_ops {
-	unsigned long (*get_tick)(void);
-	int (*add_compare)(unsigned long);
-	unsigned long softint_mask;
-	void (*disable_irq)(void);
-
-	void (*init_tick)(void);
-	unsigned long (*add_tick)(unsigned long);
-
-	char *name;
-};
-
-extern struct sparc64_tick_ops *tick_ops;
-
-extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
-extern void __devinit setup_sparc64_timer(void);
-extern void __init time_init(void);
-
-#endif /* _SPARC64_TIMER_H */
diff --git a/include/asm-sparc64/timex.h b/include/asm-sparc64/timex.h
deleted file mode 100644
index c622535c4560..000000000000
--- a/include/asm-sparc64/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-sparc64/timex.h
- *
- * sparc64 architecture timex specifications
- */
-#ifndef _ASMsparc64_TIMEX_H
-#define _ASMsparc64_TIMEX_H
-
-#include <asm/timer.h>
-
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-
-/* Getting on the cycle counter on sparc64. */
-typedef unsigned long cycles_t;
-#define get_cycles()	tick_ops->get_tick()
-
-#define ARCH_HAS_READ_CURRENT_TIMER
-
-#endif
diff --git a/include/asm-sparc64/tlb.h b/include/asm-sparc64/tlb.h
deleted file mode 100644
index ec81cdedef2c..000000000000
--- a/include/asm-sparc64/tlb.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef _SPARC64_TLB_H
-#define _SPARC64_TLB_H
-
-#include <linux/swap.h>
-#include <linux/pagemap.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-
-#define TLB_BATCH_NR	192
-
-/*
- * For UP we don't need to worry about TLB flush
- * and page free order so much..
- */
-#ifdef CONFIG_SMP
-  #define FREE_PTE_NR	506
-  #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U)
-#else
-  #define FREE_PTE_NR	1
-  #define tlb_fast_mode(bp) 1
-#endif
-
-struct mmu_gather {
-	struct mm_struct *mm;
-	unsigned int pages_nr;
-	unsigned int need_flush;
-	unsigned int fullmm;
-	unsigned int tlb_nr;
-	unsigned long vaddrs[TLB_BATCH_NR];
-	struct page *pages[FREE_PTE_NR];
-};
-
-DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-#ifdef CONFIG_SMP
-extern void smp_flush_tlb_pending(struct mm_struct *,
-				  unsigned long, unsigned long *);
-#endif
-
-extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *);
-extern void flush_tlb_pending(void);
-
-static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
-{
-	struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
-
-	BUG_ON(mp->tlb_nr);
-
-	mp->mm = mm;
-	mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U;
-	mp->fullmm = full_mm_flush;
-
-	return mp;
-}
-
-
-static inline void tlb_flush_mmu(struct mmu_gather *mp)
-{
-	if (mp->need_flush) {
-		free_pages_and_swap_cache(mp->pages, mp->pages_nr);
-		mp->pages_nr = 0;
-		mp->need_flush = 0;
-	}
-
-}
-
-#ifdef CONFIG_SMP
-extern void smp_flush_tlb_mm(struct mm_struct *mm);
-#define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
-#else
-#define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT)
-#endif
-
-static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end)
-{
-	tlb_flush_mmu(mp);
-
-	if (mp->fullmm)
-		mp->fullmm = 0;
-	else
-		flush_tlb_pending();
-
-	/* keep the page table cache within bounds */
-	check_pgt_cache();
-
-	put_cpu_var(mmu_gathers);
-}
-
-static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
-{
-	if (tlb_fast_mode(mp)) {
-		free_page_and_swap_cache(page);
-		return;
-	}
-	mp->need_flush = 1;
-	mp->pages[mp->pages_nr++] = page;
-	if (mp->pages_nr >= FREE_PTE_NR)
-		tlb_flush_mmu(mp);
-}
-
-#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
-#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
-#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
-#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
-
-#define tlb_migrate_finish(mm)	do { } while (0)
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma)	do { } while (0)
-
-#endif /* _SPARC64_TLB_H */
diff --git a/include/asm-sparc64/tlbflush.h b/include/asm-sparc64/tlbflush.h
deleted file mode 100644
index fbb675dbe0c9..000000000000
--- a/include/asm-sparc64/tlbflush.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _SPARC64_TLBFLUSH_H
-#define _SPARC64_TLBFLUSH_H
-
-#include <linux/mm.h>
-#include <asm/mmu_context.h>
-
-/* TSB flush operations. */
-struct mmu_gather;
-extern void flush_tsb_kernel_range(unsigned long start, unsigned long end);
-extern void flush_tsb_user(struct mmu_gather *mp);
-
-/* TLB flush operations. */
-
-extern void flush_tlb_pending(void);
-
-#define flush_tlb_range(vma,start,end)	\
-	do { (void)(start); flush_tlb_pending(); } while (0)
-#define flush_tlb_page(vma,addr)	flush_tlb_pending()
-#define flush_tlb_mm(mm)		flush_tlb_pending()
-
-/* Local cpu only.  */
-extern void __flush_tlb_all(void);
-
-extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
-
-#ifndef CONFIG_SMP
-
-#define flush_tlb_kernel_range(start,end) \
-do {	flush_tsb_kernel_range(start,end); \
-	__flush_tlb_kernel_range(start,end); \
-} while (0)
-
-#else /* CONFIG_SMP */
-
-extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end);
-
-#define flush_tlb_kernel_range(start, end) \
-do {	flush_tsb_kernel_range(start,end); \
-	smp_flush_tlb_kernel_range(start, end); \
-} while (0)
-
-#endif /* ! CONFIG_SMP */
-
-#endif /* _SPARC64_TLBFLUSH_H */
diff --git a/include/asm-sparc64/topology.h b/include/asm-sparc64/topology.h
deleted file mode 100644
index 001c04027c82..000000000000
--- a/include/asm-sparc64/topology.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef _ASM_SPARC64_TOPOLOGY_H
-#define _ASM_SPARC64_TOPOLOGY_H
-
-#ifdef CONFIG_NUMA
-
-#include <asm/mmzone.h>
-
-static inline int cpu_to_node(int cpu)
-{
-	return numa_cpu_lookup_table[cpu];
-}
-
-#define parent_node(node)	(node)
-
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return numa_cpumask_lookup_table[node];
-}
-
-/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
-#define node_to_cpumask_ptr(v, node)		\
-		cpumask_t *v = &(numa_cpumask_lookup_table[node])
-
-#define node_to_cpumask_ptr_next(v, node)	\
-			   v = &(numa_cpumask_lookup_table[node])
-
-static inline int node_to_first_cpu(int node)
-{
-	cpumask_t tmp;
-	tmp = node_to_cpumask(node);
-	return first_cpu(tmp);
-}
-
-struct pci_bus;
-#ifdef CONFIG_PCI
-extern int pcibus_to_node(struct pci_bus *pbus);
-#else
-static inline int pcibus_to_node(struct pci_bus *pbus)
-{
-	return -1;
-}
-#endif
-
-#define pcibus_to_cpumask(bus)	\
-	(pcibus_to_node(bus) == -1 ? \
-	 CPU_MASK_ALL : \
-	 node_to_cpumask(pcibus_to_node(bus)))
-
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 2,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 2,			\
-	.newidle_idx		= 0, 			\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= 1,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_FORK	\
-				| SD_BALANCE_EXEC	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-}
-
-#else /* CONFIG_NUMA */
-
-#include <asm-generic/topology.h>
-
-#endif /* !(CONFIG_NUMA) */
-
-#ifdef CONFIG_SMP
-#define topology_physical_package_id(cpu)	(cpu_data(cpu).proc_id)
-#define topology_core_id(cpu)			(cpu_data(cpu).core_id)
-#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
-#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
-#define mc_capable()				(sparc64_multi_core)
-#define smt_capable()				(sparc64_multi_core)
-#endif /* CONFIG_SMP */
-
-#define cpu_coregroup_map(cpu)			(cpu_core_map[cpu])
-
-#endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h
deleted file mode 100644
index 76e4299dd9bc..000000000000
--- a/include/asm-sparc64/tsb.h
+++ /dev/null
@@ -1,283 +0,0 @@
-#ifndef _SPARC64_TSB_H
-#define _SPARC64_TSB_H
-
-/* The sparc64 TSB is similar to the powerpc hashtables.  It's a
- * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
- * pointers into this table for 8K and 64K page sizes, and also a
- * comparison TAG based upon the virtual address and context which
- * faults.
- *
- * TLB miss trap handler software does the actual lookup via something
- * of the form:
- *
- * 	ldxa		[%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
- * 	ldxa		[%g0] ASI_{D,I}MMU, %g6
- *	sllx		%g6, 22, %g6
- *	srlx		%g6, 22, %g6
- * 	ldda		[%g1] ASI_NUCLEUS_QUAD_LDD, %g4
- * 	cmp		%g4, %g6
- * 	bne,pn	%xcc, tsb_miss_{d,i}tlb
- * 	 mov		FAULT_CODE_{D,I}TLB, %g3
- * 	stxa		%g5, [%g0] ASI_{D,I}TLB_DATA_IN
- * 	retry
- *
- *
- * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
- * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
- * register which is:
- *
- * -------------------------------------------------
- * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
- * -------------------------------------------------
- *  63 61 60      48 47 42 41                     0
- *
- * But actually, since we use per-mm TSB's, we zero out the CONTEXT
- * field.
- *
- * Like the powerpc hashtables we need to use locking in order to
- * synchronize while we update the entries.  PTE updates need locking
- * as well.
- *
- * We need to carefully choose a lock bits for the TSB entry.  We
- * choose to use bit 47 in the tag.  Also, since we never map anything
- * at page zero in context zero, we use zero as an invalid tag entry.
- * When the lock bit is set, this forces a tag comparison failure.
- */
-
-#define TSB_TAG_LOCK_BIT	47
-#define TSB_TAG_LOCK_HIGH	(1 << (TSB_TAG_LOCK_BIT - 32))
-
-#define TSB_TAG_INVALID_BIT	46
-#define TSB_TAG_INVALID_HIGH	(1 << (TSB_TAG_INVALID_BIT - 32))
-
-#define TSB_MEMBAR	membar	#StoreStore
-
-/* Some cpus support physical address quad loads.  We want to use
- * those if possible so we don't need to hard-lock the TSB mapping
- * into the TLB.  We encode some instruction patching in order to
- * support this.
- *
- * The kernel TSB is locked into the TLB by virtue of being in the
- * kernel image, so we don't play these games for swapper_tsb access.
- */
-#ifndef __ASSEMBLY__
-struct tsb_ldquad_phys_patch_entry {
-	unsigned int	addr;
-	unsigned int	sun4u_insn;
-	unsigned int	sun4v_insn;
-};
-extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
-	__tsb_ldquad_phys_patch_end;
-
-struct tsb_phys_patch_entry {
-	unsigned int	addr;
-	unsigned int	insn;
-};
-extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
-#endif
-#define TSB_LOAD_QUAD(TSB, REG)	\
-661:	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
-	.section	.tsb_ldquad_phys_patch, "ax"; \
-	.word		661b; \
-	ldda		[TSB] ASI_QUAD_LDD_PHYS, REG; \
-	ldda		[TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
-	.previous
-
-#define TSB_LOAD_TAG_HIGH(TSB, REG) \
-661:	lduwa		[TSB] ASI_N, REG; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	lduwa		[TSB] ASI_PHYS_USE_EC, REG; \
-	.previous
-
-#define TSB_LOAD_TAG(TSB, REG) \
-661:	ldxa		[TSB] ASI_N, REG; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	ldxa		[TSB] ASI_PHYS_USE_EC, REG; \
-	.previous
-
-#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
-661:	casa		[TSB] ASI_N, REG1, REG2; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	casa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
-	.previous
-
-#define TSB_CAS_TAG(TSB, REG1, REG2) \
-661:	casxa		[TSB] ASI_N, REG1, REG2; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	casxa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
-	.previous
-
-#define TSB_STORE(ADDR, VAL) \
-661:	stxa		VAL, [ADDR] ASI_N; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	stxa		VAL, [ADDR] ASI_PHYS_USE_EC; \
-	.previous
-
-#define TSB_LOCK_TAG(TSB, REG1, REG2)	\
-99:	TSB_LOAD_TAG_HIGH(TSB, REG1);	\
-	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
-	andcc	REG1, REG2, %g0;	\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	TSB_CAS_TAG_HIGH(TSB, REG1, REG2);	\
-	cmp	REG1, REG2;		\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	TSB_MEMBAR
-
-#define TSB_WRITE(TSB, TTE, TAG) \
-	add	TSB, 0x8, TSB;   \
-	TSB_STORE(TSB, TTE);     \
-	sub	TSB, 0x8, TSB;   \
-	TSB_MEMBAR;              \
-	TSB_STORE(TSB, TAG);
-
-#define KTSB_LOAD_QUAD(TSB, REG) \
-	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG;
-
-#define KTSB_STORE(ADDR, VAL) \
-	stxa		VAL, [ADDR] ASI_N;
-
-#define KTSB_LOCK_TAG(TSB, REG1, REG2)	\
-99:	lduwa	[TSB] ASI_N, REG1;	\
-	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
-	andcc	REG1, REG2, %g0;	\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	casa	[TSB] ASI_N, REG1, REG2;\
-	cmp	REG1, REG2;		\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	TSB_MEMBAR
-
-#define KTSB_WRITE(TSB, TTE, TAG) \
-	add	TSB, 0x8, TSB;   \
-	stxa	TTE, [TSB] ASI_N;     \
-	sub	TSB, 0x8, TSB;   \
-	TSB_MEMBAR;              \
-	stxa	TAG, [TSB] ASI_N;
-
-	/* Do a kernel page table walk.  Leaves physical PTE pointer in
-	 * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
-	 * VADDR will not be clobbered, but REG2 will.
-	 */
-#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
-	sethi		%hi(swapper_pg_dir), REG1; \
-	or		REG1, %lo(swapper_pg_dir), REG1; \
-	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	andn		REG2, 0x3, REG2; \
-	lduw		[REG1 + REG2], REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x3, REG2; \
-	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x7, REG2; \
-	add		REG1, REG2, REG1;
-
-	/* Do a user page table walk in MMU globals.  Leaves physical PTE
-	 * pointer in REG1.  Jumps to FAIL_LABEL on early page table walk
-	 * termination.  Physical base of page tables is in PHYS_PGD which
-	 * will not be modified.
-	 *
-	 * VADDR will not be clobbered, but REG1 and REG2 will.
-	 */
-#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)	\
-	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	andn		REG2, 0x3, REG2; \
-	lduwa		[PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x3, REG2; \
-	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x7, REG2; \
-	add		REG1, REG2, REG1;
-
-/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
- * If no entry is found, FAIL_LABEL will be branched to.  On success
- * the resulting PTE value will be left in REG1.  VADDR is preserved
- * by this routine.
- */
-#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
-	sethi		%hi(prom_trans), REG1; \
-	or		REG1, %lo(prom_trans), REG1; \
-97:	ldx		[REG1 + 0x00], REG2; \
-	brz,pn		REG2, FAIL_LABEL; \
-	 nop; \
-	ldx		[REG1 + 0x08], REG3; \
-	add		REG2, REG3, REG3; \
-	cmp		REG2, VADDR; \
-	bgu,pt		%xcc, 98f; \
-	 cmp		VADDR, REG3; \
-	bgeu,pt		%xcc, 98f; \
-	 ldx		[REG1 + 0x10], REG3; \
-	sub		VADDR, REG2, REG2; \
-	ba,pt		%xcc, 99f; \
-	 add		REG3, REG2, REG1; \
-98:	ba,pt		%xcc, 97b; \
-	 add		REG1, (3 * 8), REG1; \
-99:
-
-	/* We use a 32K TSB for the whole kernel, this allows to
-	 * handle about 16MB of modules and vmalloc mappings without
-	 * incurring many hash conflicts.
-	 */
-#define KERNEL_TSB_SIZE_BYTES	(32 * 1024)
-#define KERNEL_TSB_NENTRIES	\
-	(KERNEL_TSB_SIZE_BYTES / 16)
-#define KERNEL_TSB4M_NENTRIES	4096
-
-	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
-	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
-	 * and the found TTE will be left in REG1.  REG3 and REG4 must
-	 * be an even/odd pair of registers.
-	 *
-	 * VADDR and TAG will be preserved and not clobbered by this macro.
-	 */
-#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
-	sethi		%hi(swapper_tsb), REG1; \
-	or		REG1, %lo(swapper_tsb), REG1; \
-	srlx		VADDR, PAGE_SHIFT, REG2; \
-	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
-	sllx		REG2, 4, REG2; \
-	add		REG1, REG2, REG2; \
-	KTSB_LOAD_QUAD(REG2, REG3); \
-	cmp		REG3, TAG; \
-	be,a,pt		%xcc, OK_LABEL; \
-	 mov		REG4, REG1;
-
-#ifndef CONFIG_DEBUG_PAGEALLOC
-	/* This version uses a trick, the TAG is already (VADDR >> 22) so
-	 * we can make use of that for the index computation.
-	 */
-#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
-	sethi		%hi(swapper_4m_tsb), REG1; \
-	or		REG1, %lo(swapper_4m_tsb), REG1; \
-	and		TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
-	sllx		REG2, 4, REG2; \
-	add		REG1, REG2, REG2; \
-	KTSB_LOAD_QUAD(REG2, REG3); \
-	cmp		REG3, TAG; \
-	be,a,pt		%xcc, OK_LABEL; \
-	 mov		REG4, REG1;
-#endif
-
-#endif /* !(_SPARC64_TSB_H) */
diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h
deleted file mode 100644
index 0ba199587e07..000000000000
--- a/include/asm-sparc64/ttable.h
+++ /dev/null
@@ -1,658 +0,0 @@
-#ifndef _SPARC64_TTABLE_H
-#define _SPARC64_TTABLE_H
-
-#include <asm/utrap.h>
-
-#ifdef __ASSEMBLY__
-#include <asm/thread_info.h>
-#endif
-
-#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
-
-/* We need a "cleaned" instruction... */
-#define CLEAN_WINDOW							\
-	rdpr	%cleanwin, %l0;		add	%l0, 1, %l0;		\
-	wrpr	%l0, 0x0, %cleanwin;					\
-	clr	%o0;	clr	%o1;	clr	%o2;	clr	%o3;	\
-	clr	%o4;	clr	%o5;	clr	%o6;	clr	%o7;	\
-	clr	%l0;	clr	%l1;	clr	%l2;	clr	%l3;	\
-	clr	%l4;	clr	%l5;	clr	%l6;	clr	%l7;	\
-	retry;								\
-	nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
-
-#define TRAP(routine)					\
-	sethi	%hi(109f), %g7;				\
-	ba,pt	%xcc, etrap;				\
-109:	 or	%g7, %lo(109b), %g7;			\
-	call	routine;				\
-	 add	%sp, PTREGS_OFF, %o0;			\
-	ba,pt	%xcc, rtrap;				\
-	 nop;						\
-	nop;
-
-#define TRAP_7INSNS(routine)				\
-	sethi	%hi(109f), %g7;				\
-	ba,pt	%xcc, etrap;				\
-109:	 or	%g7, %lo(109b), %g7;			\
-	call	routine;				\
-	 add	%sp, PTREGS_OFF, %o0;			\
-	ba,pt	%xcc, rtrap;				\
-	 nop;
-
-#define TRAP_SAVEFPU(routine)				\
-	sethi	%hi(109f), %g7;				\
-	ba,pt	%xcc, do_fptrap;			\
-109:	 or	%g7, %lo(109b), %g7;			\
-	call	routine;				\
-	 add	%sp, PTREGS_OFF, %o0;			\
-	ba,pt	%xcc, rtrap;				\
-	 nop;						\
-	nop;
-
-#define TRAP_NOSAVE(routine)				\
-	ba,pt	%xcc, routine;				\
-	 nop;						\
-	nop; nop; nop; nop; nop; nop;
-	
-#define TRAP_NOSAVE_7INSNS(routine)			\
-	ba,pt	%xcc, routine;				\
-	 nop;						\
-	nop; nop; nop; nop; nop;
-	
-#define TRAPTL1(routine)				\
-	sethi	%hi(109f), %g7;				\
-	ba,pt	%xcc, etraptl1;				\
-109:	 or	%g7, %lo(109b), %g7;			\
-	call	routine;				\
-	 add	%sp, PTREGS_OFF, %o0;			\
-	ba,pt	%xcc, rtrap;				\
-	 nop;						\
-	nop;
-	
-#define TRAP_ARG(routine, arg)				\
-	sethi	%hi(109f), %g7;				\
-	ba,pt	%xcc, etrap;				\
-109:	 or	%g7, %lo(109b), %g7;			\
-	add	%sp, PTREGS_OFF, %o0;			\
-	call	routine;				\
-	 mov	arg, %o1;				\
-	ba,pt	%xcc, rtrap;				\
-	 nop;
-	
-#define TRAPTL1_ARG(routine, arg)			\
-	sethi	%hi(109f), %g7;				\
-	ba,pt	%xcc, etraptl1;				\
-109:	 or	%g7, %lo(109b), %g7;			\
-	add	%sp, PTREGS_OFF, %o0;			\
-	call	routine;				\
-	 mov	arg, %o1;				\
-	ba,pt	%xcc, rtrap;				\
-	 nop;
-	
-#define SYSCALL_TRAP(routine, systbl)			\
-	rdpr	%pil, %g2;				\
-	mov	TSTATE_SYSCALL, %g3;			\
-	sethi	%hi(109f), %g7;				\
-	ba,pt	%xcc, etrap_syscall;			\
-109:	 or	%g7, %lo(109b), %g7;			\
-	sethi	%hi(systbl), %l7;			\
-	ba,pt	%xcc, routine;				\
-	 or	%l7, %lo(systbl), %l7;
-	
-#define TRAP_UTRAP(handler,lvl)				\
-	mov	handler, %g3;				\
-	ba,pt	%xcc, utrap_trap;			\
-	 mov	lvl, %g4;				\
-	nop;						\
-	nop;						\
-	nop;						\
-	nop;						\
-	nop;
-
-#ifdef CONFIG_COMPAT
-#define	LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
-#else
-#define	LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
-#endif
-#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
-#define GETCC_TRAP TRAP(getcc)
-#define SETCC_TRAP TRAP(setcc)
-#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-
-#define TRAP_IRQ(routine, level)			\
-	rdpr	%pil, %g2;				\
-	wrpr	%g0, 15, %pil;				\
-	sethi	%hi(1f-4), %g7;				\
-	ba,pt	%xcc, etrap_irq;			\
-	 or	%g7, %lo(1f-4), %g7;			\
-	nop;						\
-	nop;						\
-	nop;						\
-	.subsection	2;				\
-1:	call	trace_hardirqs_off;			\
-	 nop;						\
-	mov	level, %o0;				\
-	call	routine;				\
-	 add	%sp, PTREGS_OFF, %o1;			\
-	ba,a,pt	%xcc, rtrap_irq;			\
-	.previous;
-
-#else
-
-#define TRAP_IRQ(routine, level)			\
-	rdpr	%pil, %g2;				\
-	wrpr	%g0, 15, %pil;				\
-	ba,pt	%xcc, etrap_irq;			\
-	 rd	%pc, %g7;				\
-	mov	level, %o0;				\
-	call	routine;				\
-	 add	%sp, PTREGS_OFF, %o1;			\
-	ba,a,pt	%xcc, rtrap_irq;
-	
-#endif
-
-#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
-
-#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
-
-#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
-
-#define FLUSH_WINDOW_TRAP						\
-	ba,pt	%xcc, etrap;						\
-	 rd	%pc, %g7;						\
-	flushw;								\
-	ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1;			\
-	add	%l1, 4, %l2;						\
-	stx	%l1, [%sp + PTREGS_OFF + PT_V9_TPC];			\
-	ba,pt	%xcc, rtrap;						\
-	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
-	        
-#ifdef CONFIG_KPROBES
-#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
-#else
-#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
-#endif
-
-#ifdef CONFIG_KGDB
-#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl)
-#else
-#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
-#endif
-
-#define SUN4V_ITSB_MISS					\
-	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
-	ldx	[%g2 + HV_FAULT_I_ADDR_OFFSET], %g4;	\
-	ldx	[%g2 + HV_FAULT_I_CTX_OFFSET], %g5;	\
-	srlx	%g4, 22, %g6;				\
-	ba,pt	%xcc, sun4v_itsb_miss;			\
-	 nop;						\
-	nop;						\
-	nop;
-
-#define SUN4V_DTSB_MISS					\
-	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
-	ldx	[%g2 + HV_FAULT_D_ADDR_OFFSET], %g4;	\
-	ldx	[%g2 + HV_FAULT_D_CTX_OFFSET], %g5;	\
-	srlx	%g4, 22, %g6;				\
-	ba,pt	%xcc, sun4v_dtsb_miss;			\
-	 nop;						\
-	nop;						\
-	nop;
-
-/* Before touching these macros, you owe it to yourself to go and
- * see how arch/sparc64/kernel/winfixup.S works... -DaveM
- *
- * For the user cases we used to use the %asi register, but
- * it turns out that the "wr xxx, %asi" costs ~5 cycles, so
- * now we use immediate ASI loads and stores instead.  Kudos
- * to Greg Onufer for pointing out this performance anomaly.
- *
- * Further note that we cannot use the g2, g4, g5, and g7 alternate
- * globals in the spill routines, check out the save instruction in
- * arch/sparc64/kernel/etrap.S to see what I mean about g2, and
- * g4/g5 are the globals which are preserved by etrap processing
- * for the caller of it.  The g7 register is the return pc for
- * etrap.  Finally, g6 is the current thread register so we cannot
- * us it in the spill handlers either.  Most of these rules do not
- * apply to fill processing, only g6 is not usable.
- */
-
-/* Normal kernel spill */
-#define SPILL_0_NORMAL					\
-	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
-	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
-	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
-	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
-	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
-	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
-	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
-	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
-	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
-	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
-	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
-	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
-	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
-	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
-	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
-	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
-	saved; retry; nop; nop; nop; nop; nop; nop;	\
-	nop; nop; nop; nop; nop; nop; nop; nop;
-
-#define SPILL_0_NORMAL_ETRAP				\
-etrap_kernel_spill:					\
-	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
-	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
-	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
-	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
-	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
-	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
-	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
-	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
-	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
-	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
-	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
-	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
-	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
-	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
-	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
-	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
-	saved;						\
-	sub	%g1, 2, %g1;				\
-	ba,pt	%xcc, etrap_save;			\
-	wrpr	%g1, %cwp;				\
-	nop; nop; nop; nop; nop; nop; nop; nop;		\
-	nop; nop; nop; nop;
-
-/* Normal 64bit spill */
-#define SPILL_1_GENERIC(ASI)				\
-	add	%sp, STACK_BIAS + 0x00, %g1;		\
-	stxa	%l0, [%g1 + %g0] ASI;			\
-	mov	0x08, %g3;				\
-	stxa	%l1, [%g1 + %g3] ASI;			\
-	add	%g1, 0x10, %g1;				\
-	stxa	%l2, [%g1 + %g0] ASI;			\
-	stxa	%l3, [%g1 + %g3] ASI;			\
-	add	%g1, 0x10, %g1;				\
-	stxa	%l4, [%g1 + %g0] ASI;			\
-	stxa	%l5, [%g1 + %g3] ASI;			\
-	add	%g1, 0x10, %g1;				\
-	stxa	%l6, [%g1 + %g0] ASI;			\
-	stxa	%l7, [%g1 + %g3] ASI;			\
-	add	%g1, 0x10, %g1;				\
-	stxa	%i0, [%g1 + %g0] ASI;			\
-	stxa	%i1, [%g1 + %g3] ASI;			\
-	add	%g1, 0x10, %g1;				\
-	stxa	%i2, [%g1 + %g0] ASI;			\
-	stxa	%i3, [%g1 + %g3] ASI;			\
-	add	%g1, 0x10, %g1;				\
-	stxa	%i4, [%g1 + %g0] ASI;			\
-	stxa	%i5, [%g1 + %g3] ASI;			\
-	add	%g1, 0x10, %g1;				\
-	stxa	%i6, [%g1 + %g0] ASI;			\
-	stxa	%i7, [%g1 + %g3] ASI;			\
-	saved;						\
-	retry; nop; nop;				\
-	b,a,pt	%xcc, spill_fixup_dax;			\
-	b,a,pt	%xcc, spill_fixup_mna;			\
-	b,a,pt	%xcc, spill_fixup;
-
-#define SPILL_1_GENERIC_ETRAP				\
-etrap_user_spill_64bit:					\
-	stxa	%l0, [%sp + STACK_BIAS + 0x00] %asi;	\
-	stxa	%l1, [%sp + STACK_BIAS + 0x08] %asi;	\
-	stxa	%l2, [%sp + STACK_BIAS + 0x10] %asi;	\
-	stxa	%l3, [%sp + STACK_BIAS + 0x18] %asi;	\
-	stxa	%l4, [%sp + STACK_BIAS + 0x20] %asi;	\
-	stxa	%l5, [%sp + STACK_BIAS + 0x28] %asi;	\
-	stxa	%l6, [%sp + STACK_BIAS + 0x30] %asi;	\
-	stxa	%l7, [%sp + STACK_BIAS + 0x38] %asi;	\
-	stxa	%i0, [%sp + STACK_BIAS + 0x40] %asi;	\
-	stxa	%i1, [%sp + STACK_BIAS + 0x48] %asi;	\
-	stxa	%i2, [%sp + STACK_BIAS + 0x50] %asi;	\
-	stxa	%i3, [%sp + STACK_BIAS + 0x58] %asi;	\
-	stxa	%i4, [%sp + STACK_BIAS + 0x60] %asi;	\
-	stxa	%i5, [%sp + STACK_BIAS + 0x68] %asi;	\
-	stxa	%i6, [%sp + STACK_BIAS + 0x70] %asi;	\
-	stxa	%i7, [%sp + STACK_BIAS + 0x78] %asi;	\
-	saved;						\
-	sub	%g1, 2, %g1;				\
-	ba,pt	%xcc, etrap_save;			\
-	 wrpr	%g1, %cwp;				\
-	nop; nop; nop; nop; nop;			\
-	nop; nop; nop; nop;				\
-	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
-	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
-	ba,a,pt	%xcc, etrap_spill_fixup_64bit;
-
-#define SPILL_1_GENERIC_ETRAP_FIXUP			\
-etrap_spill_fixup_64bit:				\
-	ldub	[%g6 + TI_WSAVED], %g1;			\
-	sll	%g1, 3, %g3;				\
-	add	%g6, %g3, %g3;				\
-	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
-	sll	%g1, 7, %g3;				\
-	add	%g6, %g3, %g3;				\
-	stx	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
-	stx	%l1, [%g3 + TI_REG_WINDOW + 0x08];	\
-	stx	%l2, [%g3 + TI_REG_WINDOW + 0x10];	\
-	stx	%l3, [%g3 + TI_REG_WINDOW + 0x18];	\
-	stx	%l4, [%g3 + TI_REG_WINDOW + 0x20];	\
-	stx	%l5, [%g3 + TI_REG_WINDOW + 0x28];	\
-	stx	%l6, [%g3 + TI_REG_WINDOW + 0x30];	\
-	stx	%l7, [%g3 + TI_REG_WINDOW + 0x38];	\
-	stx	%i0, [%g3 + TI_REG_WINDOW + 0x40];	\
-	stx	%i1, [%g3 + TI_REG_WINDOW + 0x48];	\
-	stx	%i2, [%g3 + TI_REG_WINDOW + 0x50];	\
-	stx	%i3, [%g3 + TI_REG_WINDOW + 0x58];	\
-	stx	%i4, [%g3 + TI_REG_WINDOW + 0x60];	\
-	stx	%i5, [%g3 + TI_REG_WINDOW + 0x68];	\
-	stx	%i6, [%g3 + TI_REG_WINDOW + 0x70];	\
-	stx	%i7, [%g3 + TI_REG_WINDOW + 0x78];	\
-	add	%g1, 1, %g1;				\
-	stb	%g1, [%g6 + TI_WSAVED];			\
-	saved;						\
-	rdpr	%cwp, %g1;				\
-	sub	%g1, 2, %g1;				\
-	ba,pt	%xcc, etrap_save;			\
-	 wrpr	%g1, %cwp;				\
-	nop; nop; nop
-
-/* Normal 32bit spill */
-#define SPILL_2_GENERIC(ASI)				\
-	srl	%sp, 0, %sp;				\
-	stwa	%l0, [%sp + %g0] ASI;			\
-	mov	0x04, %g3;				\
-	stwa	%l1, [%sp + %g3] ASI;			\
-	add	%sp, 0x08, %g1;				\
-	stwa	%l2, [%g1 + %g0] ASI;			\
-	stwa	%l3, [%g1 + %g3] ASI;			\
-	add	%g1, 0x08, %g1;				\
-	stwa	%l4, [%g1 + %g0] ASI;			\
-	stwa	%l5, [%g1 + %g3] ASI;			\
-	add	%g1, 0x08, %g1;				\
-	stwa	%l6, [%g1 + %g0] ASI;			\
-	stwa	%l7, [%g1 + %g3] ASI;			\
-	add	%g1, 0x08, %g1;				\
-	stwa	%i0, [%g1 + %g0] ASI;			\
-	stwa	%i1, [%g1 + %g3] ASI;			\
-	add	%g1, 0x08, %g1;				\
-	stwa	%i2, [%g1 + %g0] ASI;			\
-	stwa	%i3, [%g1 + %g3] ASI;			\
-	add	%g1, 0x08, %g1;				\
-	stwa	%i4, [%g1 + %g0] ASI;			\
-	stwa	%i5, [%g1 + %g3] ASI;			\
-	add	%g1, 0x08, %g1;				\
-	stwa	%i6, [%g1 + %g0] ASI;			\
-	stwa	%i7, [%g1 + %g3] ASI;			\
-	saved;						\
-        retry; nop; nop;				\
-	b,a,pt	%xcc, spill_fixup_dax;			\
-	b,a,pt	%xcc, spill_fixup_mna;			\
-	b,a,pt	%xcc, spill_fixup;
-
-#define SPILL_2_GENERIC_ETRAP		\
-etrap_user_spill_32bit:			\
-	srl	%sp, 0, %sp;		\
-	stwa	%l0, [%sp + 0x00] %asi;	\
-	stwa	%l1, [%sp + 0x04] %asi;	\
-	stwa	%l2, [%sp + 0x08] %asi;	\
-	stwa	%l3, [%sp + 0x0c] %asi;	\
-	stwa	%l4, [%sp + 0x10] %asi;	\
-	stwa	%l5, [%sp + 0x14] %asi;	\
-	stwa	%l6, [%sp + 0x18] %asi;	\
-	stwa	%l7, [%sp + 0x1c] %asi;	\
-	stwa	%i0, [%sp + 0x20] %asi;	\
-	stwa	%i1, [%sp + 0x24] %asi;	\
-	stwa	%i2, [%sp + 0x28] %asi;	\
-	stwa	%i3, [%sp + 0x2c] %asi;	\
-	stwa	%i4, [%sp + 0x30] %asi;	\
-	stwa	%i5, [%sp + 0x34] %asi;	\
-	stwa	%i6, [%sp + 0x38] %asi;	\
-	stwa	%i7, [%sp + 0x3c] %asi;	\
-	saved;				\
-	sub	%g1, 2, %g1;		\
-	ba,pt	%xcc, etrap_save;	\
-	 wrpr	%g1, %cwp;		\
-	nop; nop; nop; nop;		\
-	nop; nop; nop; nop;		\
-	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
-	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
-	ba,a,pt	%xcc, etrap_spill_fixup_32bit;
-
-#define SPILL_2_GENERIC_ETRAP_FIXUP			\
-etrap_spill_fixup_32bit:				\
-	ldub	[%g6 + TI_WSAVED], %g1;			\
-	sll	%g1, 3, %g3;				\
-	add	%g6, %g3, %g3;				\
-	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
-	sll	%g1, 7, %g3;				\
-	add	%g6, %g3, %g3;				\
-	stw	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
-	stw	%l1, [%g3 + TI_REG_WINDOW + 0x04];	\
-	stw	%l2, [%g3 + TI_REG_WINDOW + 0x08];	\
-	stw	%l3, [%g3 + TI_REG_WINDOW + 0x0c];	\
-	stw	%l4, [%g3 + TI_REG_WINDOW + 0x10];	\
-	stw	%l5, [%g3 + TI_REG_WINDOW + 0x14];	\
-	stw	%l6, [%g3 + TI_REG_WINDOW + 0x18];	\
-	stw	%l7, [%g3 + TI_REG_WINDOW + 0x1c];	\
-	stw	%i0, [%g3 + TI_REG_WINDOW + 0x20];	\
-	stw	%i1, [%g3 + TI_REG_WINDOW + 0x24];	\
-	stw	%i2, [%g3 + TI_REG_WINDOW + 0x28];	\
-	stw	%i3, [%g3 + TI_REG_WINDOW + 0x2c];	\
-	stw	%i4, [%g3 + TI_REG_WINDOW + 0x30];	\
-	stw	%i5, [%g3 + TI_REG_WINDOW + 0x34];	\
-	stw	%i6, [%g3 + TI_REG_WINDOW + 0x38];	\
-	stw	%i7, [%g3 + TI_REG_WINDOW + 0x3c];	\
-	add	%g1, 1, %g1;				\
-	stb	%g1, [%g6 + TI_WSAVED];			\
-	saved;						\
-	rdpr	%cwp, %g1;				\
-	sub	%g1, 2, %g1;				\
-	ba,pt	%xcc, etrap_save;			\
-	 wrpr	%g1, %cwp;				\
-	nop; nop; nop
-
-#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
-#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
-#define SPILL_3_NORMAL SPILL_0_NORMAL
-#define SPILL_4_NORMAL SPILL_0_NORMAL
-#define SPILL_5_NORMAL SPILL_0_NORMAL
-#define SPILL_6_NORMAL SPILL_0_NORMAL
-#define SPILL_7_NORMAL SPILL_0_NORMAL
-
-#define SPILL_0_OTHER SPILL_0_NORMAL
-#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
-#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
-#define SPILL_3_OTHER SPILL_3_NORMAL
-#define SPILL_4_OTHER SPILL_4_NORMAL
-#define SPILL_5_OTHER SPILL_5_NORMAL
-#define SPILL_6_OTHER SPILL_6_NORMAL
-#define SPILL_7_OTHER SPILL_7_NORMAL
-
-/* Normal kernel fill */
-#define FILL_0_NORMAL					\
-	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
-	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
-	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
-	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
-	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
-	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
-	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
-	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
-	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
-	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
-	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
-	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
-	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
-	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
-	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
-	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
-	restored; retry; nop; nop; nop; nop; nop; nop;	\
-	nop; nop; nop; nop; nop; nop; nop; nop;
-
-#define FILL_0_NORMAL_RTRAP				\
-kern_rtt_fill:						\
-	rdpr	%cwp, %g1;				\
-	sub	%g1, 1, %g1;				\
-	wrpr	%g1, %cwp;				\
-	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
-	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
-	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
-	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
-	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
-	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
-	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
-	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
-	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
-	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
-	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
-	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
-	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
-	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
-	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
-	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
-	restored;					\
-	add	%g1, 1, %g1;				\
-	ba,pt	%xcc, kern_rtt_restore;			\
-	 wrpr	%g1, %cwp;				\
-	nop; nop; nop; nop; nop;			\
-	nop; nop; nop; nop;
-
-
-/* Normal 64bit fill */
-#define FILL_1_GENERIC(ASI)				\
-	add	%sp, STACK_BIAS + 0x00, %g1;		\
-	ldxa	[%g1 + %g0] ASI, %l0;			\
-	mov	0x08, %g2;				\
-	mov	0x10, %g3;				\
-	ldxa	[%g1 + %g2] ASI, %l1;			\
-	mov	0x18, %g5;				\
-	ldxa	[%g1 + %g3] ASI, %l2;			\
-	ldxa	[%g1 + %g5] ASI, %l3;			\
-	add	%g1, 0x20, %g1;				\
-	ldxa	[%g1 + %g0] ASI, %l4;			\
-	ldxa	[%g1 + %g2] ASI, %l5;			\
-	ldxa	[%g1 + %g3] ASI, %l6;			\
-	ldxa	[%g1 + %g5] ASI, %l7;			\
-	add	%g1, 0x20, %g1;				\
-	ldxa	[%g1 + %g0] ASI, %i0;			\
-	ldxa	[%g1 + %g2] ASI, %i1;			\
-	ldxa	[%g1 + %g3] ASI, %i2;			\
-	ldxa	[%g1 + %g5] ASI, %i3;			\
-	add	%g1, 0x20, %g1;				\
-	ldxa	[%g1 + %g0] ASI, %i4;			\
-	ldxa	[%g1 + %g2] ASI, %i5;			\
-	ldxa	[%g1 + %g3] ASI, %i6;			\
-	ldxa	[%g1 + %g5] ASI, %i7;			\
-	restored;					\
-	retry; nop; nop; nop; nop;			\
-	b,a,pt	%xcc, fill_fixup_dax;			\
-	b,a,pt	%xcc, fill_fixup_mna;			\
-	b,a,pt	%xcc, fill_fixup;
-
-#define FILL_1_GENERIC_RTRAP				\
-user_rtt_fill_64bit:					\
-	ldxa	[%sp + STACK_BIAS + 0x00] %asi, %l0;	\
-	ldxa	[%sp + STACK_BIAS + 0x08] %asi, %l1;	\
-	ldxa	[%sp + STACK_BIAS + 0x10] %asi, %l2;	\
-	ldxa	[%sp + STACK_BIAS + 0x18] %asi, %l3;	\
-	ldxa	[%sp + STACK_BIAS + 0x20] %asi, %l4;	\
-	ldxa	[%sp + STACK_BIAS + 0x28] %asi, %l5;	\
-	ldxa	[%sp + STACK_BIAS + 0x30] %asi, %l6;	\
-	ldxa	[%sp + STACK_BIAS + 0x38] %asi, %l7;	\
-	ldxa	[%sp + STACK_BIAS + 0x40] %asi, %i0;	\
-	ldxa	[%sp + STACK_BIAS + 0x48] %asi, %i1;	\
-	ldxa	[%sp + STACK_BIAS + 0x50] %asi, %i2;	\
-	ldxa	[%sp + STACK_BIAS + 0x58] %asi, %i3;	\
-	ldxa	[%sp + STACK_BIAS + 0x60] %asi, %i4;	\
-	ldxa	[%sp + STACK_BIAS + 0x68] %asi, %i5;	\
-	ldxa	[%sp + STACK_BIAS + 0x70] %asi, %i6;	\
-	ldxa	[%sp + STACK_BIAS + 0x78] %asi, %i7;	\
-	ba,pt	%xcc, user_rtt_pre_restore;		\
-	 restored;					\
-	nop; nop; nop; nop; nop; nop;			\
-	nop; nop; nop; nop; nop;			\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;
-
-
-/* Normal 32bit fill */
-#define FILL_2_GENERIC(ASI)				\
-	srl	%sp, 0, %sp;				\
-	lduwa	[%sp + %g0] ASI, %l0;			\
-	mov	0x04, %g2;				\
-	mov	0x08, %g3;				\
-	lduwa	[%sp + %g2] ASI, %l1;			\
-	mov	0x0c, %g5;				\
-	lduwa	[%sp + %g3] ASI, %l2;			\
-	lduwa	[%sp + %g5] ASI, %l3;			\
-	add	%sp, 0x10, %g1;				\
-	lduwa	[%g1 + %g0] ASI, %l4;			\
-	lduwa	[%g1 + %g2] ASI, %l5;			\
-	lduwa	[%g1 + %g3] ASI, %l6;			\
-	lduwa	[%g1 + %g5] ASI, %l7;			\
-	add	%g1, 0x10, %g1;				\
-	lduwa	[%g1 + %g0] ASI, %i0;			\
-	lduwa	[%g1 + %g2] ASI, %i1;			\
-	lduwa	[%g1 + %g3] ASI, %i2;			\
-	lduwa	[%g1 + %g5] ASI, %i3;			\
-	add	%g1, 0x10, %g1;				\
-	lduwa	[%g1 + %g0] ASI, %i4;			\
-	lduwa	[%g1 + %g2] ASI, %i5;			\
-	lduwa	[%g1 + %g3] ASI, %i6;			\
-	lduwa	[%g1 + %g5] ASI, %i7;			\
-	restored;					\
-	retry; nop; nop; nop; nop;			\
-	b,a,pt	%xcc, fill_fixup_dax;			\
-	b,a,pt	%xcc, fill_fixup_mna;			\
-	b,a,pt	%xcc, fill_fixup;
-
-#define FILL_2_GENERIC_RTRAP				\
-user_rtt_fill_32bit:					\
-	srl	%sp, 0, %sp;				\
-	lduwa	[%sp + 0x00] %asi, %l0;			\
-	lduwa	[%sp + 0x04] %asi, %l1;			\
-	lduwa	[%sp + 0x08] %asi, %l2;			\
-	lduwa	[%sp + 0x0c] %asi, %l3;			\
-	lduwa	[%sp + 0x10] %asi, %l4;			\
-	lduwa	[%sp + 0x14] %asi, %l5;			\
-	lduwa	[%sp + 0x18] %asi, %l6;			\
-	lduwa	[%sp + 0x1c] %asi, %l7;			\
-	lduwa	[%sp + 0x20] %asi, %i0;			\
-	lduwa	[%sp + 0x24] %asi, %i1;			\
-	lduwa	[%sp + 0x28] %asi, %i2;			\
-	lduwa	[%sp + 0x2c] %asi, %i3;			\
-	lduwa	[%sp + 0x30] %asi, %i4;			\
-	lduwa	[%sp + 0x34] %asi, %i5;			\
-	lduwa	[%sp + 0x38] %asi, %i6;			\
-	lduwa	[%sp + 0x3c] %asi, %i7;			\
-	ba,pt	%xcc, user_rtt_pre_restore;		\
-	 restored;					\
-	nop; nop; nop; nop; nop;			\
-	nop; nop; nop; nop; nop;			\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;
-		
-
-#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
-#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
-#define FILL_3_NORMAL FILL_0_NORMAL
-#define FILL_4_NORMAL FILL_0_NORMAL
-#define FILL_5_NORMAL FILL_0_NORMAL
-#define FILL_6_NORMAL FILL_0_NORMAL
-#define FILL_7_NORMAL FILL_0_NORMAL
-
-#define FILL_0_OTHER FILL_0_NORMAL
-#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
-#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
-#define FILL_3_OTHER FILL_3_NORMAL
-#define FILL_4_OTHER FILL_4_NORMAL
-#define FILL_5_OTHER FILL_5_NORMAL
-#define FILL_6_OTHER FILL_6_NORMAL
-#define FILL_7_OTHER FILL_7_NORMAL
-
-#endif /* !(_SPARC64_TTABLE_H) */
diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h
deleted file mode 100644
index b27ccc85202f..000000000000
--- a/include/asm-sparc64/types.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _SPARC64_TYPES_H
-#define _SPARC64_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-l64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 64
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses come in generic and 64-bit flavours.  */
-
-typedef u32 dma_addr_t;
-typedef u64 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* defined(_SPARC64_TYPES_H) */
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
deleted file mode 100644
index 5fcbaf68c3f6..000000000000
--- a/include/asm-sparc64/uaccess.h
+++ /dev/null
@@ -1,273 +0,0 @@
-#ifndef _ASM_UACCESS_H
-#define _ASM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <asm/asi.h>
-#include <asm/system.h>
-#include <asm/spitfire.h>
-#include <asm-generic/uaccess.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * Sparc64 is segmented, though more like the M68K than the I386. 
- * We use the secondary ASI to address user memory, which references a
- * completely different VM map, thus there is zero chance of the user
- * doing something queer and tricking us into poking kernel memory.
- *
- * What is left here is basically what is needed for the other parts of
- * the kernel that expect to be able to manipulate, erum, "segments".
- * Or perhaps more properly, permissions.
- *
- * "For historical reasons, these macros are grossly misnamed." -Linus
- */
-
-#define KERNEL_DS   ((mm_segment_t) { ASI_P })
-#define USER_DS     ((mm_segment_t) { ASI_AIUS })	/* har har har */
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-#define get_fs() ((mm_segment_t) { get_thread_current_ds() })
-#define get_ds() (KERNEL_DS)
-
-#define segment_eq(a,b)  ((a).seg == (b).seg)
-
-#define set_fs(val)								\
-do {										\
-	set_thread_current_ds((val).seg);					\
-	__asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));	\
-} while(0)
-
-static inline int __access_ok(const void __user * addr, unsigned long size)
-{
-	return 1;
-}
-
-static inline int access_ok(int type, const void __user * addr, unsigned long size)
-{
-	return 1;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-        unsigned int insn, fixup;
-};
-
-extern void __ret_efault(void);
-extern void __retl_efault(void);
-
-/* Uh, these should become the main single-value transfer routines..
- * They automatically use the right size if we just have the right
- * pointer type..
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- */
-#define put_user(x,ptr) ({ \
-unsigned long __pu_addr = (unsigned long)(ptr); \
-__chk_user_ptr(ptr); \
-__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
-
-#define get_user(x,ptr) ({ \
-unsigned long __gu_addr = (unsigned long)(ptr); \
-__chk_user_ptr(ptr); \
-__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
-
-#define __put_user(x,ptr) put_user(x,ptr)
-#define __get_user(x,ptr) get_user(x,ptr)
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) ((struct __large_struct *)(x))
-
-#define __put_user_nocheck(data,addr,size) ({ \
-register int __pu_ret; \
-switch (size) { \
-case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
-case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
-case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
-case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
-default: __pu_ret = __put_user_bad(); break; \
-} __pu_ret; })
-
-#define __put_user_asm(x,size,addr,ret)					\
-__asm__ __volatile__(							\
-	"/* Put user asm, inline. */\n"					\
-"1:\t"	"st"#size "a %1, [%2] %%asi\n\t"				\
-	"clr	%0\n"							\
-"2:\n\n\t"								\
-	".section .fixup,#alloc,#execinstr\n\t"				\
-	".align	4\n"							\
-"3:\n\t"								\
-	"sethi	%%hi(2b), %0\n\t"					\
-	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
-	" mov	%3, %0\n\n\t"						\
-	".previous\n\t"							\
-	".section __ex_table,\"a\"\n\t"					\
-	".align	4\n\t"							\
-	".word	1b, 3b\n\t"						\
-	".previous\n\n\t"						\
-       : "=r" (ret) : "r" (x), "r" (__m(addr)),				\
-	 "i" (-EFAULT))
-
-extern int __put_user_bad(void);
-
-#define __get_user_nocheck(data,addr,size,type) ({ \
-register int __gu_ret; \
-register unsigned long __gu_val; \
-switch (size) { \
-case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
-case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
-case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
-case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
-default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
-} data = (type) __gu_val; __gu_ret; })
-
-#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
-register unsigned long __gu_val __asm__ ("l1"); \
-switch (size) { \
-case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
-case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
-case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
-case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
-default: if (__get_user_bad()) return retval; \
-} data = (type) __gu_val; })
-
-#define __get_user_asm(x,size,addr,ret)					\
-__asm__ __volatile__(							\
-	"/* Get user asm, inline. */\n"					\
-"1:\t"	"ld"#size "a [%2] %%asi, %1\n\t"				\
-	"clr	%0\n"							\
-"2:\n\n\t"								\
-	".section .fixup,#alloc,#execinstr\n\t"				\
-	".align	4\n"							\
-"3:\n\t"								\
-	"sethi	%%hi(2b), %0\n\t"					\
-	"clr	%1\n\t"							\
-	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
-	" mov	%3, %0\n\n\t"						\
-	".previous\n\t"							\
-	".section __ex_table,\"a\"\n\t"					\
-	".align	4\n\t"							\
-	".word	1b, 3b\n\n\t"						\
-	".previous\n\t"							\
-       : "=r" (ret), "=r" (x) : "r" (__m(addr)),			\
-	 "i" (-EFAULT))
-
-#define __get_user_asm_ret(x,size,addr,retval)				\
-if (__builtin_constant_p(retval) && retval == -EFAULT)			\
-__asm__ __volatile__(							\
-	"/* Get user asm ret, inline. */\n"				\
-"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
-	".section __ex_table,\"a\"\n\t"					\
-	".align	4\n\t"							\
-	".word	1b,__ret_efault\n\n\t"					\
-	".previous\n\t"							\
-       : "=r" (x) : "r" (__m(addr)));					\
-else									\
-__asm__ __volatile__(							\
-	"/* Get user asm ret, inline. */\n"				\
-"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
-	".section .fixup,#alloc,#execinstr\n\t"				\
-	".align	4\n"							\
-"3:\n\t"								\
-	"ret\n\t"							\
-	" restore %%g0, %2, %%o0\n\n\t"					\
-	".previous\n\t"							\
-	".section __ex_table,\"a\"\n\t"					\
-	".align	4\n\t"							\
-	".word	1b, 3b\n\n\t"						\
-	".previous\n\t"							\
-       : "=r" (x) : "r" (__m(addr)), "i" (retval))
-
-extern int __get_user_bad(void);
-
-extern unsigned long __must_check ___copy_from_user(void *to,
-						    const void __user *from,
-						    unsigned long size);
-extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
-					  unsigned long size);
-static inline unsigned long __must_check
-copy_from_user(void *to, const void __user *from, unsigned long size)
-{
-	unsigned long ret = ___copy_from_user(to, from, size);
-
-	if (unlikely(ret))
-		ret = copy_from_user_fixup(to, from, size);
-	return ret;
-}
-#define __copy_from_user copy_from_user
-
-extern unsigned long __must_check ___copy_to_user(void __user *to,
-						  const void *from,
-						  unsigned long size);
-extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
-					unsigned long size);
-static inline unsigned long __must_check
-copy_to_user(void __user *to, const void *from, unsigned long size)
-{
-	unsigned long ret = ___copy_to_user(to, from, size);
-
-	if (unlikely(ret))
-		ret = copy_to_user_fixup(to, from, size);
-	return ret;
-}
-#define __copy_to_user copy_to_user
-
-extern unsigned long __must_check ___copy_in_user(void __user *to,
-						  const void __user *from,
-						  unsigned long size);
-extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
-					unsigned long size);
-static inline unsigned long __must_check
-copy_in_user(void __user *to, void __user *from, unsigned long size)
-{
-	unsigned long ret = ___copy_in_user(to, from, size);
-
-	if (unlikely(ret))
-		ret = copy_in_user_fixup(to, from, size);
-	return ret;
-}
-#define __copy_in_user copy_in_user
-
-extern unsigned long __must_check __clear_user(void __user *, unsigned long);
-
-#define clear_user __clear_user
-
-extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
-
-#define strncpy_from_user __strncpy_from_user
-
-extern long __strlen_user(const char __user *);
-extern long __strnlen_user(const char __user *, long len);
-
-#define strlen_user __strlen_user
-#define strnlen_user __strnlen_user
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#endif  /* __ASSEMBLY__ */
-
-#endif /* _ASM_UACCESS_H */
diff --git a/include/asm-sparc64/uctx.h b/include/asm-sparc64/uctx.h
deleted file mode 100644
index dc937c75ffdd..000000000000
--- a/include/asm-sparc64/uctx.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * uctx.h: Sparc64 {set,get}context() register state layouts.
- *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef __SPARC64_UCTX_H
-#define __SPARC64_UCTX_H
-
-#define MC_TSTATE	0
-#define MC_PC		1
-#define MC_NPC		2
-#define MC_Y		3
-#define MC_G1		4
-#define MC_G2		5
-#define MC_G3		6
-#define MC_G4		7
-#define MC_G5		8
-#define MC_G6		9
-#define MC_G7		10
-#define MC_O0		11
-#define MC_O1		12
-#define MC_O2		13
-#define MC_O3		14
-#define MC_O4		15
-#define MC_O5		16
-#define MC_O6		17
-#define MC_O7		18
-#define MC_NGREG	19
-
-typedef unsigned long mc_greg_t;
-typedef mc_greg_t mc_gregset_t[MC_NGREG];
-
-#define MC_MAXFPQ	16
-struct mc_fq {
-	unsigned long	*mcfq_addr;
-	unsigned int	mcfq_insn;
-};
-
-struct mc_fpu {
-	union {
-		unsigned int	sregs[32];
-		unsigned long	dregs[32];
-		long double	qregs[16];
-	} mcfpu_fregs;
-	unsigned long	mcfpu_fsr;
-	unsigned long	mcfpu_fprs;
-	unsigned long	mcfpu_gsr;
-	struct mc_fq	*mcfpu_fq;
-	unsigned char	mcfpu_qcnt;
-	unsigned char	mcfpu_qentsz;
-	unsigned char	mcfpu_enab;
-};
-typedef struct mc_fpu mc_fpu_t;
-
-typedef struct {
-	mc_gregset_t	mc_gregs;
-	mc_greg_t	mc_fp;
-	mc_greg_t	mc_i7;
-	mc_fpu_t	mc_fpregs;
-} mcontext_t;
-
-struct ucontext {
-	struct ucontext		*uc_link;
-	unsigned long		uc_flags;
-	sigset_t		uc_sigmask;
-	mcontext_t		uc_mcontext;
-};
-typedef struct ucontext ucontext_t;
-
-#endif /* __SPARC64_UCTX_H */
diff --git a/include/asm-sparc64/unaligned.h b/include/asm-sparc64/unaligned.h
deleted file mode 100644
index edcebb09441e..000000000000
--- a/include/asm-sparc64/unaligned.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASM_SPARC64_UNALIGNED_H
-#define _ASM_SPARC64_UNALIGNED_H
-
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-
-#endif /* _ASM_SPARC64_UNALIGNED_H */
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
deleted file mode 100644
index 13be4453a1f0..000000000000
--- a/include/asm-sparc64/unistd.h
+++ /dev/null
@@ -1,373 +0,0 @@
-#ifndef _SPARC64_UNISTD_H
-#define _SPARC64_UNISTD_H
-
-/*
- * System calls under the Sparc.
- *
- * Don't be scared by the ugly clobbers, it is the only way I can
- * think of right now to force the arguments into fixed registers
- * before the trap into the system call with gcc 'asm' statements.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- *
- * SunOS compatibility based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- */
-
-#define __NR_restart_syscall      0 /* Linux Specific				   */
-#define __NR_exit                 1 /* Common                                      */
-#define __NR_fork                 2 /* Common                                      */
-#define __NR_read                 3 /* Common                                      */
-#define __NR_write                4 /* Common                                      */
-#define __NR_open                 5 /* Common                                      */
-#define __NR_close                6 /* Common                                      */
-#define __NR_wait4                7 /* Common                                      */
-#define __NR_creat                8 /* Common                                      */
-#define __NR_link                 9 /* Common                                      */
-#define __NR_unlink              10 /* Common                                      */
-#define __NR_execv               11 /* SunOS Specific                              */
-#define __NR_chdir               12 /* Common                                      */
-#define __NR_chown		 13 /* Common					   */
-#define __NR_mknod               14 /* Common                                      */
-#define __NR_chmod               15 /* Common                                      */
-#define __NR_lchown              16 /* Common                                      */
-#define __NR_brk                 17 /* Common                                      */
-#define __NR_perfctr             18 /* Performance counter operations              */
-#define __NR_lseek               19 /* Common                                      */
-#define __NR_getpid              20 /* Common                                      */
-#define __NR_capget		 21 /* Linux Specific				   */
-#define __NR_capset		 22 /* Linux Specific				   */
-#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
-#define __NR_getuid              24 /* Common                                      */
-#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
-#define __NR_ptrace              26 /* Common                                      */
-#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
-#define __NR_sigaltstack	 28 /* Common					   */
-#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
-#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
-/* #define __NR_lchown32         31    Linux sparc32 specific                      */
-/* #define __NR_fchown32         32    Linux sparc32 specific                      */
-#define __NR_access              33 /* Common                                      */
-#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
-/* #define __NR_chown32          35    Linux sparc32 specific                      */
-#define __NR_sync                36 /* Common                                      */
-#define __NR_kill                37 /* Common                                      */
-#define __NR_stat                38 /* Common                                      */
-#define __NR_sendfile		 39 /* Linux Specific				   */
-#define __NR_lstat               40 /* Common                                      */
-#define __NR_dup                 41 /* Common                                      */
-#define __NR_pipe                42 /* Common                                      */
-#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
-/* #define __NR_getuid32         44    Linux sparc32 specific                      */
-#define __NR_umount2             45 /* Linux Specific                              */
-#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
-#define __NR_getgid              47 /* Common                                      */
-#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
-#define __NR_geteuid             49 /* SunOS calls getuid()                        */
-#define __NR_getegid             50 /* SunOS calls getgid()                        */
-#define __NR_acct                51 /* Common                                      */
-#define __NR_memory_ordering	 52 /* Linux Specific				   */
-/* #define __NR_getgid32         53    Linux sparc32 specific                      */
-#define __NR_ioctl               54 /* Common                                      */
-#define __NR_reboot              55 /* Common                                      */
-/* #define __NR_mmap2		 56    Linux sparc32 Specific                      */
-#define __NR_symlink             57 /* Common                                      */
-#define __NR_readlink            58 /* Common                                      */
-#define __NR_execve              59 /* Common                                      */
-#define __NR_umask               60 /* Common                                      */
-#define __NR_chroot              61 /* Common                                      */
-#define __NR_fstat               62 /* Common                                      */
-#define __NR_fstat64             63 /* Linux Specific                              */
-#define __NR_getpagesize         64 /* Common                                      */
-#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
-#define __NR_vfork               66 /* Common                                      */
-#define __NR_pread64             67 /* Linux Specific                              */
-#define __NR_pwrite64            68 /* Linux Specific                              */
-/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
-/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
-#define __NR_mmap                71 /* Common                                      */
-/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
-#define __NR_munmap              73 /* Common                                      */
-#define __NR_mprotect            74 /* Common                                      */
-#define __NR_madvise             75 /* Common                                      */
-#define __NR_vhangup             76 /* Common                                      */
-/* #define __NR_truncate64       77    Linux sparc32 Specific			   */
-#define __NR_mincore             78 /* Common                                      */
-#define __NR_getgroups           79 /* Common                                      */
-#define __NR_setgroups           80 /* Common                                      */
-#define __NR_getpgrp             81 /* Common                                      */
-/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
-#define __NR_setitimer           83 /* Common                                      */
-/* #define __NR_ftruncate64      84    Linux sparc32 Specific			   */
-#define __NR_swapon              85 /* Common                                      */
-#define __NR_getitimer           86 /* Common                                      */
-/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
-#define __NR_sethostname         88 /* Common                                      */
-/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
-#define __NR_dup2                90 /* Common                                      */
-/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
-#define __NR_fcntl               92 /* Common                                      */
-#define __NR_select              93 /* Common                                      */
-/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
-#define __NR_fsync               95 /* Common                                      */
-#define __NR_setpriority         96 /* Common                                      */
-#define __NR_socket              97 /* Common                                      */
-#define __NR_connect             98 /* Common                                      */
-#define __NR_accept              99 /* Common                                      */
-#define __NR_getpriority        100 /* Common                                      */
-#define __NR_rt_sigreturn       101 /* Linux Specific                              */
-#define __NR_rt_sigaction       102 /* Linux Specific                              */
-#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
-#define __NR_rt_sigpending      104 /* Linux Specific                              */
-#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
-#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
-#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
-#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS	   */
-#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS	   */
-#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS	   */
-#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS	   */
-/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
-#define __NR_recvmsg            113 /* Common                                      */
-#define __NR_sendmsg            114 /* Common                                      */
-/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
-#define __NR_gettimeofday       116 /* Common                                      */
-#define __NR_getrusage          117 /* Common                                      */
-#define __NR_getsockopt         118 /* Common                                      */
-#define __NR_getcwd		119 /* Linux Specific				   */
-#define __NR_readv              120 /* Common                                      */
-#define __NR_writev             121 /* Common                                      */
-#define __NR_settimeofday       122 /* Common                                      */
-#define __NR_fchown             123 /* Common                                      */
-#define __NR_fchmod             124 /* Common                                      */
-#define __NR_recvfrom           125 /* Common                                      */
-#define __NR_setreuid           126 /* Common                                      */
-#define __NR_setregid           127 /* Common                                      */
-#define __NR_rename             128 /* Common                                      */
-#define __NR_truncate           129 /* Common                                      */
-#define __NR_ftruncate          130 /* Common                                      */
-#define __NR_flock              131 /* Common                                      */
-#define __NR_lstat64		132 /* Linux Specific                              */
-#define __NR_sendto             133 /* Common                                      */
-#define __NR_shutdown           134 /* Common                                      */
-#define __NR_socketpair         135 /* Common                                      */
-#define __NR_mkdir              136 /* Common                                      */
-#define __NR_rmdir              137 /* Common                                      */
-#define __NR_utimes             138 /* SunOS Specific                              */
-#define __NR_stat64		139 /* Linux Specific			           */
-#define __NR_sendfile64         140 /* adjtime under SunOS                         */
-#define __NR_getpeername        141 /* Common                                      */
-#define __NR_futex              142 /* gethostid under SunOS                       */
-#define __NR_gettid             143 /* ENOSYS under SunOS                          */
-#define __NR_getrlimit		144 /* Common                                      */
-#define __NR_setrlimit          145 /* Common                                      */
-#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
-#define __NR_prctl		147 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
-#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
-#define __NR_getsockname        150 /* Common                                      */
-#define __NR_inotify_init       151 /* Linux specific                              */
-#define __NR_inotify_add_watch  152 /* Linux specific                              */
-#define __NR_poll               153 /* Common                                      */
-#define __NR_getdents64		154 /* Linux specific				   */
-/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
-#define __NR_inotify_rm_watch   156 /* Linux specific				   */
-#define __NR_statfs             157 /* Common                                      */
-#define __NR_fstatfs            158 /* Common                                      */
-#define __NR_umount             159 /* Common                                      */
-#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
-#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
-#define __NR_getdomainname      162 /* SunOS Specific                              */
-#define __NR_setdomainname      163 /* Common                                      */
-#define __NR_utrap_install	164 /* SYSV ABI/v9 required			   */
-#define __NR_quotactl           165 /* Common                                      */
-#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
-#define __NR_mount              167 /* Common                                      */
-#define __NR_ustat              168 /* Common                                      */
-#define __NR_setxattr           169 /* SunOS: semsys                               */
-#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
-#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
-#define __NR_getxattr           172 /* SunOS: auditsys                             */
-#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
-#define __NR_getdents           174 /* Common                                      */
-#define __NR_setsid             175 /* Common                                      */
-#define __NR_fchdir             176 /* Common                                      */
-#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
-#define __NR_listxattr          178 /* SunOS: vpixsys                              */
-#define __NR_llistxattr         179 /* SunOS: aioread                              */
-#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
-#define __NR_removexattr        181 /* SunOS: aiowait                              */
-#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
-#define __NR_sigpending         183 /* Common                                      */
-#define __NR_query_module	184 /* Linux Specific				   */
-#define __NR_setpgid            185 /* Common                                      */
-#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
-#define __NR_tkill              187 /* SunOS: fpathconf                            */
-#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
-#define __NR_uname              189 /* Linux Specific                              */
-#define __NR_init_module        190 /* Linux Specific                              */
-#define __NR_personality        191 /* Linux Specific                              */
-#define __NR_remap_file_pages   192 /* Linux Specific                              */
-#define __NR_epoll_create       193 /* Linux Specific                              */
-#define __NR_epoll_ctl          194 /* Linux Specific                              */
-#define __NR_epoll_wait         195 /* Linux Specific                              */
-#define __NR_ioprio_set         196 /* Linux Specific                              */
-#define __NR_getppid            197 /* Linux Specific                              */
-#define __NR_sigaction          198 /* Linux Specific                              */
-#define __NR_sgetmask           199 /* Linux Specific                              */
-#define __NR_ssetmask           200 /* Linux Specific                              */
-#define __NR_sigsuspend         201 /* Linux Specific                              */
-#define __NR_oldlstat           202 /* Linux Specific                              */
-#define __NR_uselib             203 /* Linux Specific                              */
-#define __NR_readdir            204 /* Linux Specific                              */
-#define __NR_readahead          205 /* Linux Specific                              */
-#define __NR_socketcall         206 /* Linux Specific                              */
-#define __NR_syslog             207 /* Linux Specific                              */
-#define __NR_lookup_dcookie     208 /* Linux Specific                              */
-#define __NR_fadvise64          209 /* Linux Specific                              */
-#define __NR_fadvise64_64       210 /* Linux Specific                              */
-#define __NR_tgkill             211 /* Linux Specific                              */
-#define __NR_waitpid            212 /* Linux Specific                              */
-#define __NR_swapoff            213 /* Linux Specific                              */
-#define __NR_sysinfo            214 /* Linux Specific                              */
-#define __NR_ipc                215 /* Linux Specific                              */
-#define __NR_sigreturn          216 /* Linux Specific                              */
-#define __NR_clone              217 /* Linux Specific                              */
-#define __NR_ioprio_get         218 /* Linux Specific                              */
-#define __NR_adjtimex           219 /* Linux Specific                              */
-#define __NR_sigprocmask        220 /* Linux Specific                              */
-#define __NR_create_module      221 /* Linux Specific                              */
-#define __NR_delete_module      222 /* Linux Specific                              */
-#define __NR_get_kernel_syms    223 /* Linux Specific                              */
-#define __NR_getpgid            224 /* Linux Specific                              */
-#define __NR_bdflush            225 /* Linux Specific                              */
-#define __NR_sysfs              226 /* Linux Specific                              */
-#define __NR_afs_syscall        227 /* Linux Specific                              */
-#define __NR_setfsuid           228 /* Linux Specific                              */
-#define __NR_setfsgid           229 /* Linux Specific                              */
-#define __NR__newselect         230 /* Linux Specific                              */
-#ifdef __KERNEL__
-#define __NR_time		231 /* Linux sparc32                               */
-#endif
-#define __NR_splice             232 /* Linux Specific                              */
-#define __NR_stime              233 /* Linux Specific                              */
-#define __NR_statfs64           234 /* Linux Specific                              */
-#define __NR_fstatfs64          235 /* Linux Specific                              */
-#define __NR__llseek            236 /* Linux Specific                              */
-#define __NR_mlock              237
-#define __NR_munlock            238
-#define __NR_mlockall           239
-#define __NR_munlockall         240
-#define __NR_sched_setparam     241
-#define __NR_sched_getparam     242
-#define __NR_sched_setscheduler 243
-#define __NR_sched_getscheduler 244
-#define __NR_sched_yield        245
-#define __NR_sched_get_priority_max 246
-#define __NR_sched_get_priority_min 247
-#define __NR_sched_rr_get_interval  248
-#define __NR_nanosleep          249
-#define __NR_mremap             250
-#define __NR__sysctl            251
-#define __NR_getsid             252
-#define __NR_fdatasync          253
-#define __NR_nfsservctl         254
-#define __NR_sync_file_range	255
-#define __NR_clock_settime	256
-#define __NR_clock_gettime	257
-#define __NR_clock_getres	258
-#define __NR_clock_nanosleep	259
-#define __NR_sched_getaffinity	260
-#define __NR_sched_setaffinity	261
-#define __NR_timer_settime	262
-#define __NR_timer_gettime	263
-#define __NR_timer_getoverrun	264
-#define __NR_timer_delete	265
-#define __NR_timer_create	266
-/* #define __NR_vserver		267 Reserved for VSERVER */
-#define __NR_io_setup		268
-#define __NR_io_destroy		269
-#define __NR_io_submit		270
-#define __NR_io_cancel		271
-#define __NR_io_getevents	272
-#define __NR_mq_open		273
-#define __NR_mq_unlink		274
-#define __NR_mq_timedsend	275
-#define __NR_mq_timedreceive	276
-#define __NR_mq_notify		277
-#define __NR_mq_getsetattr	278
-#define __NR_waitid		279
-#define __NR_tee		280
-#define __NR_add_key		281
-#define __NR_request_key	282
-#define __NR_keyctl		283
-#define __NR_openat		284
-#define __NR_mkdirat		285
-#define __NR_mknodat		286
-#define __NR_fchownat		287
-#define __NR_futimesat		288
-#define __NR_fstatat64		289
-#define __NR_unlinkat		290
-#define __NR_renameat		291
-#define __NR_linkat		292
-#define __NR_symlinkat		293
-#define __NR_readlinkat		294
-#define __NR_fchmodat		295
-#define __NR_faccessat		296
-#define __NR_pselect6		297
-#define __NR_ppoll		298
-#define __NR_unshare		299
-#define __NR_set_robust_list	300
-#define __NR_get_robust_list	301
-#define __NR_migrate_pages	302
-#define __NR_mbind		303
-#define __NR_get_mempolicy	304
-#define __NR_set_mempolicy	305
-#define __NR_kexec_load		306
-#define __NR_move_pages		307
-#define __NR_getcpu		308
-#define __NR_epoll_pwait	309
-#define __NR_utimensat		310
-#define __NR_signalfd		311
-#define __NR_timerfd_create	312
-#define __NR_eventfd		313
-#define __NR_fallocate		314
-#define __NR_timerfd_settime	315
-#define __NR_timerfd_gettime	316
-
-#define NR_SYSCALLS		317
-
-#ifdef __KERNEL__
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_COMPAT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _SPARC64_UNISTD_H */
diff --git a/include/asm-sparc64/upa.h b/include/asm-sparc64/upa.h
deleted file mode 100644
index 5b1633223f92..000000000000
--- a/include/asm-sparc64/upa.h
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef _SPARC64_UPA_H
-#define _SPARC64_UPA_H
-
-#include <asm/asi.h>
-
-/* UPA level registers and defines. */
-
-/* UPA Config Register */
-#define UPA_CONFIG_RESV		0xffffffffc0000000 /* Reserved.                    */
-#define UPA_CONFIG_PCON		0x000000003fc00000 /* Depth of various sys queues. */
-#define UPA_CONFIG_MID		0x00000000003e0000 /* Module ID.                   */
-#define UPA_CONFIG_PCAP		0x000000000001ffff /* Port Capabilities.           */
-
-/* UPA Port ID Register */
-#define UPA_PORTID_FNP		0xff00000000000000 /* Hardcoded to 0xfc on ultra.  */
-#define UPA_PORTID_RESV		0x00fffff800000000 /* Reserved.                    */
-#define UPA_PORTID_ECCVALID     0x0000000400000000 /* Zero if mod can generate ECC */
-#define UPA_PORTID_ONEREAD      0x0000000200000000 /* Set if mod generates P_RASB  */
-#define UPA_PORTID_PINTRDQ      0x0000000180000000 /* # outstanding P_INT_REQ's    */
-#define UPA_PORTID_PREQDQ       0x000000007e000000 /* slave-wr's to mod supported  */
-#define UPA_PORTID_PREQRD       0x0000000001e00000 /* # incoming P_REQ's supported */
-#define UPA_PORTID_UPACAP       0x00000000001f0000 /* UPA capabilities of mod      */
-#define UPA_PORTID_ID           0x000000000000ffff /* Module Identification bits  */
-
-/* UPA I/O space accessors */
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-static inline unsigned char _upa_readb(unsigned long addr)
-{
-	unsigned char ret;
-
-	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline unsigned short _upa_readw(unsigned long addr)
-{
-	unsigned short ret;
-
-	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline unsigned int _upa_readl(unsigned long addr)
-{
-	unsigned int ret;
-
-	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline unsigned long _upa_readq(unsigned long addr)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */"
-			     : "=r" (ret)
-			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-
-	return ret;
-}
-
-static inline void _upa_writeb(unsigned char b, unsigned long addr)
-{
-	__asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
-			     : /* no outputs */
-			     : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _upa_writew(unsigned short w, unsigned long addr)
-{
-	__asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
-			     : /* no outputs */
-			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _upa_writel(unsigned int l, unsigned long addr)
-{
-	__asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
-			     : /* no outputs */
-			     : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-static inline void _upa_writeq(unsigned long q, unsigned long addr)
-{
-	__asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
-			     : /* no outputs */
-			     : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
-}
-
-#define upa_readb(__addr)		(_upa_readb((unsigned long)(__addr)))
-#define upa_readw(__addr)		(_upa_readw((unsigned long)(__addr)))
-#define upa_readl(__addr)		(_upa_readl((unsigned long)(__addr)))
-#define upa_readq(__addr)		(_upa_readq((unsigned long)(__addr)))
-#define upa_writeb(__b, __addr)		(_upa_writeb((__b), (unsigned long)(__addr)))
-#define upa_writew(__w, __addr)		(_upa_writew((__w), (unsigned long)(__addr)))
-#define upa_writel(__l, __addr)		(_upa_writel((__l), (unsigned long)(__addr)))
-#define upa_writeq(__q, __addr)		(_upa_writeq((__q), (unsigned long)(__addr)))
-#endif /* __KERNEL__ && !__ASSEMBLY__ */
-
-#endif /* !(_SPARC64_UPA_H) */
diff --git a/include/asm-sparc64/user.h b/include/asm-sparc64/user.h
deleted file mode 100644
index 29fc6e906c29..000000000000
--- a/include/asm-sparc64/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/user.h>
diff --git a/include/asm-sparc64/utrap.h b/include/asm-sparc64/utrap.h
deleted file mode 100644
index e49e5c46ad68..000000000000
--- a/include/asm-sparc64/utrap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * include/asm-sparc64/utrap.h
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#ifndef __ASM_SPARC64_UTRAP_H
-#define __ASM_SPARC64_UTRAP_H
-
-#define UT_INSTRUCTION_EXCEPTION		1
-#define UT_INSTRUCTION_ERROR			2
-#define UT_INSTRUCTION_PROTECTION		3
-#define UT_ILLTRAP_INSTRUCTION			4
-#define UT_ILLEGAL_INSTRUCTION			5
-#define UT_PRIVILEGED_OPCODE			6
-#define UT_FP_DISABLED				7
-#define UT_FP_EXCEPTION_IEEE_754		8
-#define UT_FP_EXCEPTION_OTHER			9
-#define UT_TAG_OVERVIEW				10
-#define UT_DIVISION_BY_ZERO			11
-#define UT_DATA_EXCEPTION			12
-#define UT_DATA_ERROR				13
-#define UT_DATA_PROTECTION			14
-#define UT_MEM_ADDRESS_NOT_ALIGNED		15
-#define UT_PRIVILEGED_ACTION			16
-#define UT_ASYNC_DATA_ERROR			17
-#define UT_TRAP_INSTRUCTION_16			18
-#define UT_TRAP_INSTRUCTION_17			19
-#define UT_TRAP_INSTRUCTION_18			20
-#define UT_TRAP_INSTRUCTION_19			21
-#define UT_TRAP_INSTRUCTION_20			22
-#define UT_TRAP_INSTRUCTION_21			23
-#define UT_TRAP_INSTRUCTION_22			24
-#define UT_TRAP_INSTRUCTION_23			25
-#define UT_TRAP_INSTRUCTION_24			26
-#define UT_TRAP_INSTRUCTION_25			27
-#define UT_TRAP_INSTRUCTION_26			28
-#define UT_TRAP_INSTRUCTION_27			29
-#define UT_TRAP_INSTRUCTION_28			30
-#define UT_TRAP_INSTRUCTION_29			31
-#define UT_TRAP_INSTRUCTION_30			32
-#define UT_TRAP_INSTRUCTION_31			33
-
-#define	UTH_NOCHANGE				(-1)
-
-#ifndef __ASSEMBLY__ 
-typedef int utrap_entry_t;
-typedef void *utrap_handler_t;
-#endif /* __ASSEMBLY__ */
-
-#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/include/asm-sparc64/vga.h b/include/asm-sparc64/vga.h
deleted file mode 100644
index c69d5b2ba19a..000000000000
--- a/include/asm-sparc64/vga.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *	Access to VGA videoram
- *
- *	(c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-#ifndef _LINUX_ASM_VGA_H_
-#define _LINUX_ASM_VGA_H_
-
-#include <asm/types.h>
-
-#define VT_BUF_HAVE_RW
-
-#undef scr_writew
-#undef scr_readw
-
-static inline void scr_writew(u16 val, u16 *addr)
-{
-	BUG_ON((long) addr >= 0);
-
-	*addr = val;
-}
-
-static inline u16 scr_readw(const u16 *addr)
-{
-	BUG_ON((long) addr >= 0);
-
-	return *addr;
-}
-
-#define VGA_MAP_MEM(x,s) (x)
-
-#endif
diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h
deleted file mode 100644
index d4de32f0f8af..000000000000
--- a/include/asm-sparc64/vio.h
+++ /dev/null
@@ -1,406 +0,0 @@
-#ifndef _SPARC64_VIO_H
-#define _SPARC64_VIO_H
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/list.h>
-#include <linux/log2.h>
-
-#include <asm/ldc.h>
-#include <asm/mdesc.h>
-
-struct vio_msg_tag {
-	u8			type;
-#define VIO_TYPE_CTRL		0x01
-#define VIO_TYPE_DATA		0x02
-#define VIO_TYPE_ERR		0x04
-
-	u8			stype;
-#define VIO_SUBTYPE_INFO	0x01
-#define VIO_SUBTYPE_ACK		0x02
-#define VIO_SUBTYPE_NACK	0x04
-
-	u16			stype_env;
-#define VIO_VER_INFO		0x0001
-#define VIO_ATTR_INFO		0x0002
-#define VIO_DRING_REG		0x0003
-#define VIO_DRING_UNREG		0x0004
-#define VIO_RDX			0x0005
-#define VIO_PKT_DATA		0x0040
-#define VIO_DESC_DATA		0x0041
-#define VIO_DRING_DATA		0x0042
-#define VNET_MCAST_INFO		0x0101
-
-	u32		sid;
-};
-
-struct vio_rdx {
-	struct vio_msg_tag	tag;
-	u64			resv[6];
-};
-
-struct vio_ver_info {
-	struct vio_msg_tag	tag;
-	u16			major;
-	u16			minor;
-	u8			dev_class;
-#define VDEV_NETWORK		0x01
-#define VDEV_NETWORK_SWITCH	0x02
-#define VDEV_DISK		0x03
-#define VDEV_DISK_SERVER	0x04
-
-	u8			resv1[3];
-	u64			resv2[5];
-};
-
-struct vio_dring_register {
-	struct vio_msg_tag	tag;
-	u64			dring_ident;
-	u32			num_descr;
-	u32			descr_size;
-	u16			options;
-#define VIO_TX_DRING		0x0001
-#define VIO_RX_DRING		0x0002
-	u16			resv;
-	u32			num_cookies;
-	struct ldc_trans_cookie	cookies[0];
-};
-
-struct vio_dring_unregister {
-	struct vio_msg_tag	tag;
-	u64			dring_ident;
-	u64			resv[5];
-};
-
-/* Data transfer modes */
-#define VIO_PKT_MODE		0x01 /* Packet based transfer	*/
-#define VIO_DESC_MODE		0x02 /* In-band descriptors	*/
-#define VIO_DRING_MODE		0x03 /* Descriptor rings	*/
-
-struct vio_dring_data {
-	struct vio_msg_tag	tag;
-	u64			seq;
-	u64			dring_ident;
-	u32			start_idx;
-	u32			end_idx;
-	u8			state;
-#define VIO_DRING_ACTIVE	0x01
-#define VIO_DRING_STOPPED	0x02
-
-	u8			__pad1;
-	u16			__pad2;
-	u32			__pad3;
-	u64			__par4[2];
-};
-
-struct vio_dring_hdr {
-	u8			state;
-#define VIO_DESC_FREE		0x01
-#define VIO_DESC_READY		0x02
-#define VIO_DESC_ACCEPTED	0x03
-#define VIO_DESC_DONE		0x04
-	u8			ack;
-#define VIO_ACK_ENABLE		0x01
-#define VIO_ACK_DISABLE		0x00
-
-	u16			__pad1;
-	u32			__pad2;
-};
-
-/* VIO disk specific structures and defines */
-struct vio_disk_attr_info {
-	struct vio_msg_tag	tag;
-	u8			xfer_mode;
-	u8			vdisk_type;
-#define VD_DISK_TYPE_SLICE	0x01 /* Slice in block device	*/
-#define VD_DISK_TYPE_DISK	0x02 /* Entire block device	*/
-	u16			resv1;
-	u32			vdisk_block_size;
-	u64			operations;
-	u64			vdisk_size;
-	u64			max_xfer_size;
-	u64			resv2[2];
-};
-
-struct vio_disk_desc {
-	struct vio_dring_hdr	hdr;
-	u64			req_id;
-	u8			operation;
-#define VD_OP_BREAD		0x01 /* Block read			*/
-#define VD_OP_BWRITE		0x02 /* Block write			*/
-#define VD_OP_FLUSH		0x03 /* Flush disk contents		*/
-#define VD_OP_GET_WCE		0x04 /* Get write-cache status		*/
-#define VD_OP_SET_WCE		0x05 /* Enable/disable write-cache	*/
-#define VD_OP_GET_VTOC		0x06 /* Get VTOC			*/
-#define VD_OP_SET_VTOC		0x07 /* Set VTOC			*/
-#define VD_OP_GET_DISKGEOM	0x08 /* Get disk geometry		*/
-#define VD_OP_SET_DISKGEOM	0x09 /* Set disk geometry		*/
-#define VD_OP_SCSICMD		0x0a /* SCSI control command		*/
-#define VD_OP_GET_DEVID		0x0b /* Get device ID			*/
-#define VD_OP_GET_EFI		0x0c /* Get EFI				*/
-#define VD_OP_SET_EFI		0x0d /* Set EFI				*/
-	u8			slice;
-	u16			resv1;
-	u32			status;
-	u64			offset;
-	u64			size;
-	u32			ncookies;
-	u32			resv2;
-	struct ldc_trans_cookie	cookies[0];
-};
-
-#define VIO_DISK_VNAME_LEN	8
-#define VIO_DISK_ALABEL_LEN	128
-#define VIO_DISK_NUM_PART	8
-
-struct vio_disk_vtoc {
-	u8			volume_name[VIO_DISK_VNAME_LEN];
-	u16			sector_size;
-	u16			num_partitions;
-	u8			ascii_label[VIO_DISK_ALABEL_LEN];
-	struct {
-		u16		id;
-		u16		perm_flags;
-		u32		resv;
-		u64		start_block;
-		u64		num_blocks;
-	} partitions[VIO_DISK_NUM_PART];
-};
-
-struct vio_disk_geom {
-	u16			num_cyl; /* Num data cylinders		*/
-	u16			alt_cyl; /* Num alternate cylinders	*/
-	u16			beg_cyl; /* Cyl off of fixed head area	*/
-	u16			num_hd;  /* Num heads			*/
-	u16			num_sec; /* Num sectors			*/
-	u16			ifact;   /* Interleave factor		*/
-	u16			apc;     /* Alts per cylinder (SCSI)	*/
-	u16			rpm;	 /* Revolutions per minute	*/
-	u16			phy_cyl; /* Num physical cylinders	*/
-	u16			wr_skip; /* Num sects to skip, writes	*/
-	u16			rd_skip; /* Num sects to skip, writes	*/
-};
-
-struct vio_disk_devid {
-	u16			resv;
-	u16			type;
-	u32			len;
-	char			id[0];
-};
-
-struct vio_disk_efi {
-	u64			lba;
-	u64			len;
-	char			data[0];
-};
-
-/* VIO net specific structures and defines */
-struct vio_net_attr_info {
-	struct vio_msg_tag	tag;
-	u8			xfer_mode;
-	u8			addr_type;
-#define VNET_ADDR_ETHERMAC	0x01
-	u16			ack_freq;
-	u32			resv1;
-	u64			addr;
-	u64			mtu;
-	u64			resv2[3];
-};
-
-#define VNET_NUM_MCAST		7
-
-struct vio_net_mcast_info {
-	struct vio_msg_tag	tag;
-	u8			set;
-	u8			count;
-	u8			mcast_addr[VNET_NUM_MCAST * 6];
-	u32			resv;
-};
-
-struct vio_net_desc {
-	struct vio_dring_hdr	hdr;
-	u32			size;
-	u32			ncookies;
-	struct ldc_trans_cookie	cookies[0];
-};
-
-#define VIO_MAX_RING_COOKIES	24
-
-struct vio_dring_state {
-	u64			ident;
-	void			*base;
-	u64			snd_nxt;
-	u64			rcv_nxt;
-	u32			entry_size;
-	u32			num_entries;
-	u32			prod;
-	u32			cons;
-	u32			pending;
-	int			ncookies;
-	struct ldc_trans_cookie	cookies[VIO_MAX_RING_COOKIES];
-};
-
-static inline void *vio_dring_cur(struct vio_dring_state *dr)
-{
-	return dr->base + (dr->entry_size * dr->prod);
-}
-
-static inline void *vio_dring_entry(struct vio_dring_state *dr,
-				    unsigned int index)
-{
-	return dr->base + (dr->entry_size * index);
-}
-
-static inline u32 vio_dring_avail(struct vio_dring_state *dr,
-				  unsigned int ring_size)
-{
-	BUILD_BUG_ON(!is_power_of_2(ring_size));
-
-	return (dr->pending -
-		((dr->prod - dr->cons) & (ring_size - 1)));
-}
-
-#define VIO_MAX_TYPE_LEN	32
-#define VIO_MAX_COMPAT_LEN	64
-
-struct vio_dev {
-	u64			mp;
-	struct device_node	*dp;
-
-	char			type[VIO_MAX_TYPE_LEN];
-	char			compat[VIO_MAX_COMPAT_LEN];
-	int			compat_len;
-
-	u64			dev_no;
-
-	unsigned long		channel_id;
-
-	unsigned int		tx_irq;
-	unsigned int		rx_irq;
-
-	struct device		dev;
-};
-
-struct vio_driver {
-	struct list_head		node;
-	const struct vio_device_id	*id_table;
-	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
-	int (*remove)(struct vio_dev *dev);
-	void (*shutdown)(struct vio_dev *dev);
-	unsigned long			driver_data;
-	struct device_driver		driver;
-};
-
-struct vio_version {
-	u16		major;
-	u16		minor;
-};
-
-struct vio_driver_state;
-struct vio_driver_ops {
-	int	(*send_attr)(struct vio_driver_state *vio);
-	int	(*handle_attr)(struct vio_driver_state *vio, void *pkt);
-	void	(*handshake_complete)(struct vio_driver_state *vio);
-};
-
-struct vio_completion {
-	struct completion	com;
-	int			err;
-	int			waiting_for;
-};
-
-struct vio_driver_state {
-	/* Protects VIO handshake and, optionally, driver private state.  */
-	spinlock_t		lock;
-
-	struct ldc_channel	*lp;
-
-	u32			_peer_sid;
-	u32			_local_sid;
-	struct vio_dring_state	drings[2];
-#define VIO_DRIVER_TX_RING	0
-#define VIO_DRIVER_RX_RING	1
-
-	u8			hs_state;
-#define VIO_HS_INVALID		0x00
-#define VIO_HS_GOTVERS		0x01
-#define VIO_HS_GOT_ATTR		0x04
-#define VIO_HS_SENT_DREG	0x08
-#define VIO_HS_SENT_RDX		0x10
-#define VIO_HS_GOT_RDX_ACK	0x20
-#define VIO_HS_GOT_RDX		0x40
-#define VIO_HS_SENT_RDX_ACK	0x80
-#define VIO_HS_COMPLETE		(VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK)
-
-	u8			dev_class;
-
-	u8			dr_state;
-#define VIO_DR_STATE_TXREG	0x01
-#define VIO_DR_STATE_RXREG	0x02
-#define VIO_DR_STATE_TXREQ	0x10
-#define VIO_DR_STATE_RXREQ	0x20
-
-	u8			debug;
-#define VIO_DEBUG_HS		0x01
-#define VIO_DEBUG_DATA		0x02
-
-	void			*desc_buf;
-	unsigned int		desc_buf_len;
-
-	struct vio_completion	*cmp;
-
-	struct vio_dev		*vdev;
-
-	struct timer_list	timer;
-
-	struct vio_version	ver;
-
-	struct vio_version	*ver_table;
-	int			ver_table_entries;
-
-	char			*name;
-
-	struct vio_driver_ops	*ops;
-};
-
-#define viodbg(TYPE, f, a...) \
-do {	if (vio->debug & VIO_DEBUG_##TYPE) \
-		printk(KERN_INFO "vio: ID[%lu] " f, \
-		       vio->vdev->channel_id, ## a); \
-} while (0)
-
-extern int vio_register_driver(struct vio_driver *drv);
-extern void vio_unregister_driver(struct vio_driver *drv);
-
-static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
-{
-	return container_of(drv, struct vio_driver, driver);
-}
-
-static inline struct vio_dev *to_vio_dev(struct device *dev)
-{
-	return container_of(dev, struct vio_dev, dev);
-}
-
-extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len);
-extern void vio_link_state_change(struct vio_driver_state *vio, int event);
-extern void vio_conn_reset(struct vio_driver_state *vio);
-extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt);
-extern int vio_validate_sid(struct vio_driver_state *vio,
-			    struct vio_msg_tag *tp);
-extern u32 vio_send_sid(struct vio_driver_state *vio);
-extern int vio_ldc_alloc(struct vio_driver_state *vio,
-			 struct ldc_channel_config *base_cfg, void *event_arg);
-extern void vio_ldc_free(struct vio_driver_state *vio);
-extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev,
-			   u8 dev_class, struct vio_version *ver_table,
-			   int ver_table_size, struct vio_driver_ops *ops,
-			   char *name);
-
-extern void vio_port_up(struct vio_driver_state *vio);
-
-#endif /* _SPARC64_VIO_H */
diff --git a/include/asm-sparc64/visasm.h b/include/asm-sparc64/visasm.h
deleted file mode 100644
index 34f2ec64933b..000000000000
--- a/include/asm-sparc64/visasm.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _SPARC64_VISASM_H
-#define _SPARC64_VISASM_H
-
-/* visasm.h:  FPU saving macros for VIS routines
- *
- * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
- */
- 
-#include <asm/pstate.h>
-#include <asm/ptrace.h>
-
-/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
-
-#define VISEntry					\
-	rd		%fprs, %o5;			\
-	andcc		%o5, (FPRS_FEF|FPRS_DU), %g0;	\
-	be,pt		%icc, 297f;			\
-	 sethi		%hi(297f), %g7;			\
-	sethi		%hi(VISenter), %g1;		\
-	jmpl		%g1 + %lo(VISenter), %g0;	\
-	 or		%g7, %lo(297f), %g7;		\
-297:	wr		%g0, FPRS_FEF, %fprs;		\
-
-#define VISExit						\
-	wr		%g0, 0, %fprs;
-
-/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc.
- * Must preserve %o5 between VISEntryHalf and VISExitHalf */
-
-#define VISEntryHalf					\
-	rd		%fprs, %o5;			\
-	andcc		%o5, FPRS_FEF, %g0;		\
-	be,pt		%icc, 297f;			\
-	 sethi		%hi(298f), %g7;			\
-	sethi		%hi(VISenterhalf), %g1;		\
-	jmpl		%g1 + %lo(VISenterhalf), %g0;	\
-	 or		%g7, %lo(298f), %g7;		\
-	clr		%o5;				\
-297:	wr		%o5, FPRS_FEF, %fprs;		\
-298:
-
-#define VISExitHalf					\
-	wr		%o5, 0, %fprs;
-
-#ifndef __ASSEMBLY__	
-static inline void save_and_clear_fpu(void) {
-	__asm__ __volatile__ (
-"		rd %%fprs, %%o5\n"
-"		andcc %%o5, %0, %%g0\n"
-"		be,pt %%icc, 299f\n"
-"		 sethi %%hi(298f), %%g7\n"
-"		sethi %%hi(VISenter), %%g1\n"
-"		jmpl %%g1 + %%lo(VISenter), %%g0\n"
-"		 or %%g7, %%lo(298f), %%g7\n"
-"	298:	wr %%g0, 0, %%fprs\n"
-"	299:\n"
-"		" : : "i" (FPRS_FEF|FPRS_DU) :
-		"o5", "g1", "g2", "g3", "g7", "cc");
-}
-#endif
-
-#endif /* _SPARC64_ASI_H */
diff --git a/include/asm-sparc64/watchdog.h b/include/asm-sparc64/watchdog.h
deleted file mode 100644
index 5baf2d3919cf..000000000000
--- a/include/asm-sparc64/watchdog.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *
- * watchdog - Driver interface for the hardware watchdog timers
- * present on Sun Microsystems boardsets
- *
- * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
- *
- */
-
-#ifndef _SPARC64_WATCHDOG_H
-#define _SPARC64_WATCHDOG_H
-
-#include <linux/watchdog.h>
-
-/* Solaris compatibility ioctls--
- * Ref. <linux/watchdog.h> for standard linux watchdog ioctls
- */
-#define WIOCSTART _IO (WATCHDOG_IOCTL_BASE, 10)		/* Start Timer		*/
-#define WIOCSTOP  _IO (WATCHDOG_IOCTL_BASE, 11)		/* Stop Timer		*/
-#define WIOCGSTAT _IOR(WATCHDOG_IOCTL_BASE, 12, int)/* Get Timer Status	*/
-
-/* Status flags from WIOCGSTAT ioctl
- */
-#define WD_FREERUN	0x01	/* timer is running, interrupts disabled	*/
-#define WD_EXPIRED	0x02	/* timer has expired						*/
-#define WD_RUNNING	0x04	/* timer is running, interrupts enabled		*/
-#define WD_STOPPED	0x08	/* timer has not been started				*/
-#define WD_SERVICED 0x10	/* timer interrupt was serviced				*/
-
-#endif /* ifndef _SPARC64_WATCHDOG_H */
-
diff --git a/include/asm-sparc64/xor.h b/include/asm-sparc64/xor.h
deleted file mode 100644
index a0233884fc94..000000000000
--- a/include/asm-sparc64/xor.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sparc64/xor.h
- *
- * High speed xor_block operation for RAID4/5 utilizing the
- * UltraSparc Visual Instruction Set and Niagara block-init
- * twin-load instructions.
- *
- * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
- * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/spitfire.h>
-
-extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
-		      unsigned long *);
-extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
-		      unsigned long *, unsigned long *);
-extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
-		      unsigned long *, unsigned long *, unsigned long *);
-
-/* XXX Ugh, write cheetah versions... -DaveM */
-
-static struct xor_block_template xor_block_VIS = {
-        .name	= "VIS",
-        .do_2	= xor_vis_2,
-        .do_3	= xor_vis_3,
-        .do_4	= xor_vis_4,
-        .do_5	= xor_vis_5,
-};
-
-extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
-			  unsigned long *);
-extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
-			  unsigned long *, unsigned long *);
-extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
-			  unsigned long *, unsigned long *, unsigned long *);
-
-static struct xor_block_template xor_block_niagara = {
-        .name	= "Niagara",
-        .do_2	= xor_niagara_2,
-        .do_3	= xor_niagara_3,
-        .do_4	= xor_niagara_4,
-        .do_5	= xor_niagara_5,
-};
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES				\
-	do {						\
-		xor_speed(&xor_block_VIS);		\
-		xor_speed(&xor_block_niagara);		\
-	} while (0)
-
-/* For VIS for everything except Niagara.  */
-#define XOR_SELECT_TEMPLATE(FASTEST) \
-	((tlb_type == hypervisor && \
-	  (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
-	   sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \
-	 &xor_block_niagara : \
-	 &xor_block_VIS)
diff --git a/include/asm-um/kvm.h b/include/asm-um/kvm.h
deleted file mode 100644
index 66aa77094551..000000000000
--- a/include/asm-um/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_UM_H
-#define __LINUX_KVM_UM_H
-
-/* um does not support KVM */
-
-#endif
diff --git a/include/asm-um/namei.h b/include/asm-um/namei.h
deleted file mode 100644
index 002984d5bc85..000000000000
--- a/include/asm-um/namei.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_NAMEI_H
-#define __UM_NAMEI_H
-
-#include "asm/arch/namei.h"
-
-#endif
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 916e1a61999f..a6df1f13d732 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -92,9 +92,6 @@ typedef struct page *pgtable_t;
 #define __pgd(x) ((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
 extern unsigned long uml_physmem;
 
 #define PAGE_OFFSET (uml_physmem)
@@ -118,9 +115,6 @@ extern unsigned long uml_physmem;
 #define pfn_valid(pfn) ((pfn) < max_mapnr)
 #define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
 
-extern struct page *arch_validate(struct page *page, gfp_t mask, int order);
-#define HAVE_ARCH_VALIDATE
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/page.h>
 
diff --git a/include/asm-um/ptrace-generic.h b/include/asm-um/ptrace-generic.h
index 6aefcd32fc61..315749705ea1 100644
--- a/include/asm-um/ptrace-generic.h
+++ b/include/asm-um/ptrace-generic.h
@@ -47,9 +47,6 @@ extern int set_fpregs(struct user_i387_struct __user *buf,
 
 extern void show_regs(struct pt_regs *regs);
 
-extern void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
-			 int error_code);
-
 extern int arch_copy_tls(struct task_struct *new);
 extern void clear_flushed_tls(struct task_struct *task);
 
diff --git a/include/asm-um/semaphore.h b/include/asm-um/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-um/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index 356b83e2c22e..e07e72846c7a 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -53,21 +53,7 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-#ifdef CONFIG_DEBUG_STACK_USAGE
-
-#define alloc_thread_info(tsk) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, \
-						 CONFIG_KERNEL_STACK_ORDER))
-#else
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) \
-	((struct thread_info *) __get_free_pages(GFP_KERNEL, \
-						 CONFIG_KERNEL_STACK_ORDER))
-#endif
-
-#define free_thread_info(ti) \
-	free_pages((unsigned long)(ti),CONFIG_KERNEL_STACK_ORDER)
+#define THREAD_SIZE_ORDER CONFIG_KERNEL_STACK_ORDER
 
 #endif
 
diff --git a/include/asm-v850/Kbuild b/include/asm-v850/Kbuild
deleted file mode 100644
index c68e1680da01..000000000000
--- a/include/asm-v850/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-include include/asm-generic/Kbuild.asm
diff --git a/include/asm-v850/a.out.h b/include/asm-v850/a.out.h
deleted file mode 100644
index e9439a0708f6..000000000000
--- a/include/asm-v850/a.out.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __V850_A_OUT_H__
-#define __V850_A_OUT_H__
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-
-#endif /* __V850_A_OUT_H__ */
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
deleted file mode 100644
index cd5eaee103b0..000000000000
--- a/include/asm-v850/anna.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ANNA_H__
-#define __V850_ANNA_H__
-
-#include <asm/v850e2.h>		/* Based on V850E2 core.  */
-
-
-#define CPU_MODEL	"v850e2/anna"
-#define CPU_MODEL_LONG	"NEC V850E2/Anna"
-#define PLATFORM	"anna"
-#define PLATFORM_LONG	"NEC/Midas lab V850E2/Anna evaluation board"
-
-#define CPU_CLOCK_FREQ	200000000 /*  200MHz */
-#define SYS_CLOCK_FREQ	 33300000 /* 33.3MHz */
-
-
-/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-#define SRAM_ADDR	0x04000000
-#define SRAM_SIZE	0x00100000 /* 1MB */
-/* 64MB of DRAM.  */
-#define SDRAM_ADDR	0x08000000	
-#define SDRAM_SIZE	0x04000000 /* 64MB */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 	SRAM_ADDR
-
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  The Anna chip has
-   128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
-   every 128K, so we can use the `last mirror' (except for the portion at
-   the top which is overridden by I/O space).  In addition, the early
-   sample chip we're using has lots of memory errors in the dLB ram, so we
-   use a specially chosen location that has at least 20 bytes of contiguous
-   valid memory (xxxF0020 - xxxF003F).  */
-#define R0_RAM_ADDR			0xFFFF8020
-
-
-/* Anna specific control registers.  */
-#define ANNA_ILBEN_ADDR			0xFFFFF7F2
-#define ANNA_ILBEN			(*(volatile u16 *)ANNA_ILBEN_ADDR)
-
-
-/* I/O port P0-P3. */
-/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
-#define ANNA_PORT_IO_ADDR(n)		(0xFFFFF400 + (n) * 2)
-#define ANNA_PORT_IO(n)			(*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ANNA_PORT_PM_ADDR(n)		(0xFFFFF410 + (n) * 2)
-#define ANNA_PORT_PM(n)			(*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTP(n)	(n)	/* Pnnn (pin) interrupts 0-15 */
-#define IRQ_INTP_NUM	16
-#define IRQ_INTOV(n)	(0x10 + (n)) /* 0-2 */
-#define IRQ_INTOV_NUM	2
-#define IRQ_INTCCC(n)	(0x12 + (n))
-#define IRQ_INTCCC_NUM	4
-#define IRQ_INTCMD(n)	(0x16 + (n)) /* interval timer interrupts 0-5 */
-#define IRQ_INTCMD_NUM	6
-#define IRQ_INTDMA(n)	(0x1C + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM	4
-#define IRQ_INTDMXER	0x20
-#define IRQ_INTSRE(n)	(0x21 + (n)*3) /* UART 0-1 reception error */
-#define IRQ_INTSRE_NUM	2
-#define IRQ_INTSR(n)	(0x22 + (n)*3) /* UART 0-1 reception completion */
-#define IRQ_INTSR_NUM	2
-#define IRQ_INTST(n)	(0x23 + (n)*3) /* UART 0-1 transmission completion */
-#define IRQ_INTST_NUM	2
-
-#define NUM_CPU_IRQS	64
-
-#ifndef __ASSEMBLY__
-/* Initialize chip interrupts.  */
-extern void anna_init_irqs (void);
-#endif
-
-
-/* Anna UART details (basically the same as the V850E/MA1, but 2 channels).  */
-#define V850E_UART_NUM_CHANNELS		2
-#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 2)
-#define V850E_UART_CHIP_NAME 		"V850E2/NA85E2A"
-
-/* This is the UART channel that's actually connected on the board.  */
-#define V850E_UART_CONSOLE_CHANNEL	1
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	anna_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void anna_uart_pre_configure (unsigned chan,
-				     unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
-
-/* CTS for UART channel 1 is pin P37 (bit 7 of port 3).  */
-#define V850E_UART_CTS(chan)	((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
-/* RTS for UART channel 1 is pin P07 (bit 7 of port 0).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 1) {						      \
-		   unsigned old = ANNA_PORT_IO(0); 			      \
-		   if (val)						      \
-			   ANNA_PORT_IO(0) = old & ~0x80;		      \
-		   else							      \
-			   ANNA_PORT_IO(0) = old | 0x80;		      \
-	   }								      \
-   } while (0)
-
-
-/* Timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-/* Timer D details (the Anna actually has 5 of these; should change later). */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
-#define V850E_TIMER_D_TMCD_CS_MIN	1 /* min 2^1 divider */
-
-
-#endif /* __V850_ANNA_H__ */
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
deleted file mode 100644
index 5a5ca9073d09..000000000000
--- a/include/asm-v850/as85ep1.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_AS85EP1_H__
-#define __V850_AS85EP1_H__
-
-#include <asm/v850e.h>
-
-
-#define CPU_MODEL	"as85ep1"
-#define CPU_MODEL_LONG	"NEC V850E/AS85EP1"
-#define PLATFORM	"AS85EP1"
-#define PLATFORM_LONG	"NEC V850E/AS85EP1 evaluation board"
-
-#define CPU_CLOCK_FREQ	96000000 /*  96MHz */
-#define SYS_CLOCK_FREQ	CPU_CLOCK_FREQ
-
-
-/* 1MB of static RAM.  */
-#define SRAM_ADDR	0x00400000
-#define SRAM_SIZE	0x00100000 /* 1MB */
-/* About 58MB of DRAM.  This can actually be at one of two positions,
-   determined by jump JP3; we have to use the first position because the
-   second is partially out of processor instruction addressing range
-   (though in the second position there's actually 64MB available).  */
-#define SDRAM_ADDR	0x00600000
-#define SDRAM_SIZE	0x039F8000 /* approx 58MB */
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 	SRAM_ADDR
-
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  The AS85EP1 chip
-   16K of internal RAM located slightly before I/O space.  */
-#define R0_RAM_ADDR	0xFFFF8000
-
-
-/* AS85EP1 specific control registers.  */
-#define AS85EP1_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
-#define AS85EP1_CSC(n)		(*(volatile u16 *)AS85EP1_CSC_ADDR(n))
-#define AS85EP1_BSC_ADDR	0xFFFFF066
-#define AS85EP1_BSC		(*(volatile u16 *)AS85EP1_BSC_ADDR)
-#define AS85EP1_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
-#define AS85EP1_BCT(n)		(*(volatile u16 *)AS85EP1_BCT_ADDR(n))
-#define AS85EP1_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
-#define AS85EP1_DWC(n)		(*(volatile u16 *)AS85EP1_DWC_ADDR(n))
-#define AS85EP1_BCC_ADDR	0xFFFFF488
-#define AS85EP1_BCC		(*(volatile u16 *)AS85EP1_BCC_ADDR)
-#define AS85EP1_ASC_ADDR	0xFFFFF48A
-#define AS85EP1_ASC		(*(volatile u16 *)AS85EP1_ASC_ADDR)
-#define AS85EP1_BCP_ADDR	0xFFFFF48C
-#define AS85EP1_BCP		(*(volatile u16 *)AS85EP1_BCP_ADDR)
-#define AS85EP1_LBS_ADDR	0xFFFFF48E
-#define AS85EP1_LBS		(*(volatile u16 *)AS85EP1_LBS_ADDR)
-#define AS85EP1_BMC_ADDR	0xFFFFF498
-#define AS85EP1_BMC		(*(volatile u16 *)AS85EP1_BMC_ADDR)
-#define AS85EP1_PRC_ADDR	0xFFFFF49A
-#define AS85EP1_PRC		(*(volatile u16 *)AS85EP1_PRC_ADDR)
-#define AS85EP1_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
-#define AS85EP1_SCR(n)		(*(volatile u16 *)AS85EP1_SCR_ADDR(n))
-#define AS85EP1_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
-#define AS85EP1_RFS(n)		(*(volatile u16 *)AS85EP1_RFS_ADDR(n))
-#define AS85EP1_IRAMM_ADDR	0xFFFFF80A
-#define AS85EP1_IRAMM		(*(volatile u8 *)AS85EP1_IRAMM_ADDR)
-
-
-
-/* I/O port P0-P13. */
-/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
-#define AS85EP1_PORT_IO_ADDR(n)	(0xFFFFF400 + (n) * 2)
-#define AS85EP1_PORT_IO(n)	(*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define AS85EP1_PORT_PM_ADDR(n)	(0xFFFFF420 + (n) * 2)
-#define AS85EP1_PORT_PM(n)	(*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
-#define AS85EP1_PORT_PMC(n)	(*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTCCC(n)	(0x0C + (n))
-#define IRQ_INTCCC_NUM	8
-#define IRQ_INTCMD(n)	(0x14 + (n)) /* interval timer interrupts 0-5 */
-#define IRQ_INTCMD_NUM	6
-#define IRQ_INTSRE(n)	(0x1E + (n)*3) /* UART 0-1 reception error */
-#define IRQ_INTSRE_NUM	2
-#define IRQ_INTSR(n)	(0x1F + (n)*3) /* UART 0-1 reception completion */
-#define IRQ_INTSR_NUM	2
-#define IRQ_INTST(n)	(0x20 + (n)*3) /* UART 0-1 transmission completion */
-#define IRQ_INTST_NUM	2
-
-#define NUM_CPU_IRQS	64
-
-#ifndef __ASSEMBLY__
-/* Initialize chip interrupts.  */
-extern void as85ep1_init_irqs (void);
-#endif
-
-
-/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels).  */
-#define V850E_UART_NUM_CHANNELS		2
-#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 4)
-#define V850E_UART_CHIP_NAME 		"V850E/NA85E"
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	as85ep1_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void as85ep1_uart_pre_configure (unsigned chan,
-					unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
-
-/* CTS for UART channel 1 is pin P54 (bit 4 of port 5).  */
-#define V850E_UART_CTS(chan)   ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
-/* RTS for UART channel 1 is pin P53 (bit 3 of port 5).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 1) {						      \
-		   unsigned old = AS85EP1_PORT_IO(5); 			      \
-		   if (val)						      \
-			   AS85EP1_PORT_IO(5) = old & ~0x8;		      \
-		   else							      \
-			   AS85EP1_PORT_IO(5) = old | 0x8;		      \
-	   }								      \
-   } while (0)
-
-
-/* Timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
-#define V850E_TIMER_D_TMCD_CS_MIN	2 /* min 2^2 divider */
-
-
-#endif /* __V850_AS85EP1_H__ */
diff --git a/include/asm-v850/asm.h b/include/asm-v850/asm.h
deleted file mode 100644
index bf1e785a5dde..000000000000
--- a/include/asm-v850/asm.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-v850/asm.h -- Macros for writing assembly code
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#define G_ENTRY(name)							      \
-   .balign 4;								      \
-   .globl name;								      \
-   .type  name,@function;						      \
-   name
-#define G_DATA(name)							      \
-   .globl name;								      \
-   .type  name,@object;							      \
-   name
-#define END(name)							      \
-   .size  name,.-name
-
-#define L_ENTRY(name)							      \
-   .balign 4;								      \
-   .type  name,@function;						      \
-   name
-#define L_DATA(name)							      \
-   .type  name,@object;							      \
-   name
diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h
deleted file mode 100644
index e4e57de08f73..000000000000
--- a/include/asm-v850/atomic.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * include/asm-v850/atomic.h -- Atomic operations
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ATOMIC_H__
-#define __V850_ATOMIC_H__
-
-
-#include <asm/system.h>
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-typedef struct { int counter; } atomic_t;
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v,i)		(((v)->counter) = (i))
-
-static inline int atomic_add_return (int i, volatile atomic_t *v)
-{
-	unsigned long flags;
-	int res;
-
-	local_irq_save (flags);
-	res = v->counter + i;
-	v->counter = res;
-	local_irq_restore (flags);
-
-	return res;
-}
-
-static __inline__ int atomic_sub_return (int i, volatile atomic_t *v)
-{
-	unsigned long flags;
-	int res;
-
-	local_irq_save (flags);
-	res = v->counter - i;
-	v->counter = res;
-	local_irq_restore (flags);
-
-	return res;
-}
-
-static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	local_irq_save (flags);
-	*addr &= ~mask;
-	local_irq_restore (flags);
-}
-
-#endif
-
-#define atomic_add(i, v)	atomic_add_return ((i), (v))
-#define atomic_sub(i, v)	atomic_sub_return ((i), (v))
-
-#define atomic_dec_return(v)	atomic_sub_return (1, (v))
-#define atomic_inc_return(v)	atomic_add_return (1, (v))
-#define atomic_inc(v) 		atomic_inc_return (v)
-#define atomic_dec(v) 		atomic_dec_return (v)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-#define atomic_sub_and_test(i,v)	(atomic_sub_return ((i), (v)) == 0)
-#define atomic_dec_and_test(v)		(atomic_sub_return (1, (v)) == 0)
-#define atomic_add_negative(i,v)	(atomic_add_return ((i), (v)) < 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (ret != u)
-		v->counter += a;
-	local_irq_restore(flags);
-
-	return ret != u;
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* __V850_ATOMIC_H__ */
diff --git a/include/asm-v850/auxvec.h b/include/asm-v850/auxvec.h
deleted file mode 100644
index f493232d0224..000000000000
--- a/include/asm-v850/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __V850_AUXVEC_H__
-#define __V850_AUXVEC_H__
-
-#endif /* __V850_AUXVEC_H__ */
diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h
deleted file mode 100644
index f82f5b4a56e0..000000000000
--- a/include/asm-v850/bitops.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * include/asm-v850/bitops.h -- Bit operations
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1992  Linus Torvalds.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#ifndef __V850_BITOPS_H__
-#define __V850_BITOPS_H__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>	/* unlikely  */
-#include <asm/byteorder.h>	/* swab32 */
-#include <asm/system.h>		/* interrupt enable/disable */
-
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ffz.h>
-
-/*
- * The __ functions are not atomic
- */
-
-/* In the following constant-bit-op macros, a "g" constraint is used when
-   we really need an integer ("i" constraint).  This is to avoid
-   warnings/errors from the compiler in the case where the associated
-   operand _isn't_ an integer, and shouldn't produce bogus assembly because
-   use of that form is protected by a guard statement that checks for
-   constants, and should otherwise be removed by the optimizer.  This
-   _usually_ works -- however, __builtin_constant_p returns true for a
-   variable with a known constant value too, and unfortunately gcc will
-   happily put the variable in a register and use the register for the "g"
-   constraint'd asm operand.  To avoid the latter problem, we add a
-   constant offset to the operand and subtract it back in the asm code;
-   forcing gcc to do arithmetic on the value is usually enough to get it
-   to use a real constant value.  This is horrible, and ultimately
-   unreliable too, but it seems to work for now (hopefully gcc will offer
-   us more control in the future, so we can do a better job).  */
-
-#define __const_bit_op(op, nr, addr)					\
-  ({ __asm__ (op " (%0 - 0x123), %1"					\
-	      :: "g" (((nr) & 0x7) + 0x123),				\
-		 "m" (*((char *)(addr) + ((nr) >> 3)))			\
-	      : "memory"); })
-#define __var_bit_op(op, nr, addr)					\
-  ({ int __nr = (nr);							\
-     __asm__ (op " %0, [%1]"						\
-	      :: "r" (__nr & 0x7),					\
-		 "r" ((char *)(addr) + (__nr >> 3))			\
-	      : "memory"); })
-#define __bit_op(op, nr, addr)						\
-  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
-   ? __const_bit_op (op, nr, addr)					\
-   : __var_bit_op (op, nr, addr))
-
-#define __set_bit(nr, addr)		__bit_op ("set1", nr, addr)
-#define __clear_bit(nr, addr)		__bit_op ("clr1", nr, addr)
-#define __change_bit(nr, addr)		__bit_op ("not1", nr, addr)
-
-/* The bit instructions used by `non-atomic' variants are actually atomic.  */
-#define set_bit __set_bit
-#define clear_bit __clear_bit
-#define change_bit __change_bit
-
-
-#define __const_tns_bit_op(op, nr, addr)				      \
-  ({ int __tns_res;							      \
-     __asm__ __volatile__ (						      \
-	     "tst1 (%1 - 0x123), %2; setf nz, %0; " op " (%1 - 0x123), %2"    \
-	     : "=&r" (__tns_res)					      \
-	     : "g" (((nr) & 0x7) + 0x123),				      \
-	       "m" (*((char *)(addr) + ((nr) >> 3)))			      \
-	     : "memory");						      \
-     __tns_res;								      \
-  })
-#define __var_tns_bit_op(op, nr, addr)					      \
-  ({ int __nr = (nr);							      \
-     int __tns_res;							      \
-     __asm__ __volatile__ (						      \
-	     "tst1 %1, [%2]; setf nz, %0; " op " %1, [%2]"		      \
-	      : "=&r" (__tns_res)					      \
-	      : "r" (__nr & 0x7),					      \
-		"r" ((char *)(addr) + (__nr >> 3))			      \
-	      : "memory");						      \
-     __tns_res;								      \
-  })
-#define __tns_bit_op(op, nr, addr)					\
-  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
-   ? __const_tns_bit_op (op, nr, addr)					\
-   : __var_tns_bit_op (op, nr, addr))
-#define __tns_atomic_bit_op(op, nr, addr)				\
-  ({ int __tns_atomic_res, __tns_atomic_flags;				\
-     local_irq_save (__tns_atomic_flags);				\
-     __tns_atomic_res = __tns_bit_op (op, nr, addr);			\
-     local_irq_restore (__tns_atomic_flags);				\
-     __tns_atomic_res;							\
-  })
-
-#define __test_and_set_bit(nr, addr)	__tns_bit_op ("set1", nr, addr)
-#define test_and_set_bit(nr, addr)	__tns_atomic_bit_op ("set1", nr, addr)
-
-#define __test_and_clear_bit(nr, addr)	__tns_bit_op ("clr1", nr, addr)
-#define test_and_clear_bit(nr, addr)	__tns_atomic_bit_op ("clr1", nr, addr)
-
-#define __test_and_change_bit(nr, addr)	__tns_bit_op ("not1", nr, addr)
-#define test_and_change_bit(nr, addr)	__tns_atomic_bit_op ("not1", nr, addr)
-
-
-#define __const_test_bit(nr, addr)					      \
-  ({ int __test_bit_res;						      \
-     __asm__ __volatile__ ("tst1 (%1 - 0x123), %2; setf nz, %0"		      \
-			   : "=r" (__test_bit_res)			      \
-			   : "g" (((nr) & 0x7) + 0x123),		      \
-			     "m" (*((const char *)(addr) + ((nr) >> 3))));    \
-     __test_bit_res;							      \
-  })
-static inline int __test_bit (int nr, const void *addr)
-{
-	int res;
-	__asm__ __volatile__ ("tst1 %1, [%2]; setf nz, %0"
-			      : "=r" (res)
-			      : "r" (nr & 0x7), "r" (addr + (nr >> 3)));
-	return res;
-}
-#define test_bit(nr,addr)						\
-  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
-   ? __const_test_bit ((nr), (addr))					\
-   : __test_bit ((nr), (addr)))
-
-
-/* clear_bit doesn't provide any barrier for the compiler.  */
-#define smp_mb__before_clear_bit()	barrier ()
-#define smp_mb__after_clear_bit()	barrier ()
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#define ext2_set_bit_atomic(l,n,a)      test_and_set_bit(n,a)
-#define ext2_clear_bit_atomic(l,n,a)    test_and_clear_bit(n,a)
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_BITOPS_H__ */
diff --git a/include/asm-v850/bug.h b/include/asm-v850/bug.h
deleted file mode 100644
index b0ed2d35f3e8..000000000000
--- a/include/asm-v850/bug.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/bug.h -- Bug reporting
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_BUG_H__
-#define __V850_BUG_H__
-
-#ifdef CONFIG_BUG
-extern void __bug (void) __attribute__ ((noreturn));
-#define BUG()		__bug()
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif /* __V850_BUG_H__ */
diff --git a/include/asm-v850/bugs.h b/include/asm-v850/bugs.h
deleted file mode 100644
index 71110a65c1d7..000000000000
--- a/include/asm-v850/bugs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  include/asm-v850e/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/include/asm-v850/byteorder.h b/include/asm-v850/byteorder.h
deleted file mode 100644
index a6f07530050e..000000000000
--- a/include/asm-v850/byteorder.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/byteorder.h -- Endian id and conversion ops
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_BYTEORDER_H__
-#define __V850_BYTEORDER_H__
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#ifdef __GNUC__
-
-static __inline__ __attribute_const__ __u32 ___arch__swab32 (__u32 word)
-{
-	__u32 res;
-	__asm__ ("bsw %1, %0" : "=r" (res) : "r" (word));
-	return res;
-}
-
-static __inline__ __attribute_const__ __u16 ___arch__swab16 (__u16 half_word)
-{
-	__u16 res;
-	__asm__ ("bsh %1, %0" : "=r" (res) : "r" (half_word));
-	return res;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* __V850_BYTEORDER_H__ */
diff --git a/include/asm-v850/cache.h b/include/asm-v850/cache.h
deleted file mode 100644
index 8832c7ea3242..000000000000
--- a/include/asm-v850/cache.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/cache.h -- Cache operations
- *
- *  Copyright (C) 2001,05  NEC Corporation
- *  Copyright (C) 2001,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CACHE_H__
-#define __V850_CACHE_H__
-
-/* All cache operations are machine-dependent.  */
-#include <asm/machdep.h>
-
-#ifndef L1_CACHE_BYTES
-/* This processor has no cache, so just choose an arbitrary value.  */
-#define L1_CACHE_BYTES		16
-#define L1_CACHE_SHIFT		4
-#endif
-
-#endif /* __V850_CACHE_H__ */
diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h
deleted file mode 100644
index 9ece05a202ef..000000000000
--- a/include/asm-v850/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-v850/cacheflush.h
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CACHEFLUSH_H__
-#define __V850_CACHEFLUSH_H__
-
-/* Somebody depends on this; sigh...  */
-#include <linux/mm.h>
-
-#include <asm/machdep.h>
-
-
-/* The following are all used by the kernel in ways that only affect
-   systems with MMUs, so we don't need them.  */
-#define flush_cache_all()			((void)0)
-#define flush_cache_mm(mm)			((void)0)
-#define flush_cache_dup_mm(mm)			((void)0)
-#define flush_cache_range(vma, start, end)	((void)0)
-#define flush_cache_page(vma, vmaddr, pfn)	((void)0)
-#define flush_dcache_page(page)			((void)0)
-#define flush_dcache_mmap_lock(mapping)		((void)0)
-#define flush_dcache_mmap_unlock(mapping)	((void)0)
-#define flush_cache_vmap(start, end)		((void)0)
-#define flush_cache_vunmap(start, end)		((void)0)
-
-#ifdef CONFIG_NO_CACHE
-
-/* Some systems have no cache at all, in which case we don't need these
-   either.  */
-#define flush_icache()				((void)0)
-#define flush_icache_range(start, end)		((void)0)
-#define flush_icache_page(vma,pg)		((void)0)
-#define flush_icache_user_range(vma,pg,adr,len)	((void)0)
-#define flush_cache_sigtramp(vaddr)		((void)0)
-
-#else /* !CONFIG_NO_CACHE */
-
-struct page;
-struct mm_struct;
-struct vm_area_struct;
-
-/* Otherwise, somebody had better define them.  */
-extern void flush_icache (void);
-extern void flush_icache_range (unsigned long start, unsigned long end);
-extern void flush_icache_page (struct vm_area_struct *vma, struct page *page);
-extern void flush_icache_user_range (struct vm_area_struct *vma,
-				     struct page *page,
-				     unsigned long adr, int len);
-extern void flush_cache_sigtramp (unsigned long addr);
-
-#endif /* CONFIG_NO_CACHE */
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
-     flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
-
-#endif /* __V850_CACHEFLUSH_H__ */
diff --git a/include/asm-v850/checksum.h b/include/asm-v850/checksum.h
deleted file mode 100644
index d1dddd938262..000000000000
--- a/include/asm-v850/checksum.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * include/asm-v850/checksum.h -- Checksum ops
- *
- *  Copyright (C) 2001,2005  NEC Corporation
- *  Copyright (C) 2001,2005  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CHECKSUM_H__
-#define __V850_CHECKSUM_H__
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_nocheck(const void *src,
-				   void *dst, int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user (const void *src,
-					     void *dst,
-					     int len, __wsum sum,
-					     int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-static inline __sum16 csum_fold (__wsum sum)
-{
-	unsigned int result;
-	/*
-			        %0		%1
-	      hsw %1, %0	H     L		L     H
-	      add %1, %0	H     L		H+L+C H+L
-	*/
-	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
-	return (__force __sum16)(~result >> 16);
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __wsum
-csum_tcpudp_nofold (__be32 saddr, __be32 daddr,
-		    unsigned short len,
-		    unsigned short proto, __wsum sum)
-{
-	int __carry;
-	__asm__ ("add %2, %0;"
-		 "setf c, %1;"
-		 "add %1, %0;"
-		 "add %3, %0;"
-		 "setf c, %1;"
-		 "add %1, %0;"
-		 "add %4, %0;"
-		 "setf c, %1;"
-		 "add %1, %0"
-		 : "=&r" (sum), "=&r" (__carry)
-		 : "r" (daddr), "r" (saddr),
-		 "r" ((len + proto) << 8),
-		 "0" (sum));
-	return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic (__be32 saddr, __be32 daddr,
-		   unsigned short len,
-		   unsigned short proto, __wsum sum)
-{
-	return csum_fold (csum_tcpudp_nofold (saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-
-#endif /* __V850_CHECKSUM_H__ */
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
deleted file mode 100644
index c389691d6f86..000000000000
--- a/include/asm-v850/clinkage.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/clinkage.h -- Macros to reflect C symbol-naming conventions
- *
- *  Copyright (C) 2001,02  NEC Corporatione
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CLINKAGE_H__
-#define __V850_CLINKAGE_H__
-
-#include <asm/macrology.h>
-#include <asm/asm.h>
-
-#define C_SYMBOL_NAME(name) 	macrology_paste(_, name)
-#define C_SYMBOL_STRING(name)	macrology_stringify(C_SYMBOL_NAME(name))
-#define C_ENTRY(name)		G_ENTRY(C_SYMBOL_NAME(name))
-#define C_DATA(name)		G_DATA(C_SYMBOL_NAME(name))
-#define C_END(name)		END(C_SYMBOL_NAME(name))
-
-#endif /* __V850_CLINKAGE_H__ */
diff --git a/include/asm-v850/cputime.h b/include/asm-v850/cputime.h
deleted file mode 100644
index 7c799c33b8a9..000000000000
--- a/include/asm-v850/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_CPUTIME_H
-#define __V850_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __V850_CPUTIME_H */
diff --git a/include/asm-v850/current.h b/include/asm-v850/current.h
deleted file mode 100644
index 30aae5673770..000000000000
--- a/include/asm-v850/current.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/current.h -- Current task
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CURRENT_H__
-#define __V850_CURRENT_H__
-
-#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
-#include <linux/thread_info.h>
-#endif
-
-#include <asm/macrology.h>
-
-
-/* Register used to hold the current task pointer while in the kernel.
-   Any `call clobbered' register without a special meaning should be OK,
-   but check asm/v850/kernel/entry.S to be sure.  */
-#define CURRENT_TASK_REGNUM	16
-#define CURRENT_TASK 		macrology_paste (r, CURRENT_TASK_REGNUM)
-
-
-#ifdef __ASSEMBLY__
-
-/* Put a pointer to the current task structure into REG.  */
-#define GET_CURRENT_TASK(reg)						\
-	GET_CURRENT_THREAD(reg);					\
-	ld.w	TI_TASK[reg], reg
-
-#else /* !__ASSEMBLY__ */
-
-/* A pointer to the current task.  */
-register struct task_struct *current					\
-   __asm__ (macrology_stringify (CURRENT_TASK));
-
-#endif /* __ASSEMBLY__ */
-
-
-#endif /* _V850_CURRENT_H */
diff --git a/include/asm-v850/delay.h b/include/asm-v850/delay.h
deleted file mode 100644
index 6d028e6b2354..000000000000
--- a/include/asm-v850/delay.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/delay.h -- Delay routines, using a pre-computed
- * 	"loops_per_second" value
- *
- *  Copyright (C) 2001,03  NEC Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1994 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#ifndef __V850_DELAY_H__
-#define __V850_DELAY_H__
-
-#include <asm/param.h>
-
-static inline void __delay(unsigned long loops)
-{
-	if (loops)
-		__asm__ __volatile__ ("1: add -1, %0; bnz 1b"
-				      : "=r" (loops) : "0" (loops));
-}
-
-/*
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)  
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void udelay(unsigned long usecs)
-{
-	register unsigned long full_loops, part_loops;
-
-	full_loops = ((usecs * HZ) / 1000000) * loops_per_jiffy;
-	usecs %= (1000000 / HZ);
-	part_loops = (usecs * HZ * loops_per_jiffy) / 1000000;
-
-	__delay(full_loops + part_loops);
-}
-
-#endif /* __V850_DELAY_H__ */
diff --git a/include/asm-v850/device.h b/include/asm-v850/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-v850/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-v850/div64.h b/include/asm-v850/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-v850/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-v850/dma-mapping.h b/include/asm-v850/dma-mapping.h
deleted file mode 100644
index 1cc42c603a1b..000000000000
--- a/include/asm-v850/dma-mapping.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __V850_DMA_MAPPING_H__
-#define __V850_DMA_MAPPING_H__
-
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif /* __V850_DMA_MAPPING_H__ */
diff --git a/include/asm-v850/dma.h b/include/asm-v850/dma.h
deleted file mode 100644
index 2369849e2d0a..000000000000
--- a/include/asm-v850/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __V850_DMA_H__
-#define __V850_DMA_H__
-
-/* What should this be?  */
-#define MAX_DMA_ADDRESS	0xFFFFFFFF
-
-/* reserve a DMA channel */
-extern int request_dma (unsigned int dmanr, const char * device_id);
-/* release it again */
-extern void free_dma (unsigned int dmanr);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif /* __V850_DMA_H__ */
diff --git a/include/asm-v850/elf.h b/include/asm-v850/elf.h
deleted file mode 100644
index 28f5b176ff1a..000000000000
--- a/include/asm-v850/elf.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef __V850_ELF_H__
-#define __V850_ELF_H__
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-#include <asm/byteorder.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x)  \
-  ((x)->e_machine == EM_V850 || (x)->e_machine == EM_CYGNUS_V850)
-
-
-/* v850 relocation types.  */
-#define R_V850_NONE		0
-#define R_V850_9_PCREL		1
-#define R_V850_22_PCREL		2
-#define R_V850_HI16_S		3
-#define R_V850_HI16		4
-#define R_V850_LO16		5
-#define R_V850_32		6
-#define R_V850_16		7
-#define R_V850_8		8
-#define R_V850_SDA_16_16_OFFSET	9	/* For ld.b, st.b, set1, clr1,
-					   not1, tst1, movea, movhi */
-#define R_V850_SDA_15_16_OFFSET	10	/* For ld.w, ld.h, ld.hu, st.w, st.h */
-#define R_V850_ZDA_16_16_OFFSET	11	/* For ld.b, st.b, set1, clr1,
-					   not1, tst1, movea, movhi */
-#define R_V850_ZDA_15_16_OFFSET	12	/* For ld.w, ld.h, ld.hu, st.w, st.h */
-#define R_V850_TDA_6_8_OFFSET	13	/* For sst.w, sld.w */
-#define R_V850_TDA_7_8_OFFSET	14	/* For sst.h, sld.h */
-#define R_V850_TDA_7_7_OFFSET	15	/* For sst.b, sld.b */
-#define R_V850_TDA_16_16_OFFSET	16	/* For set1, clr1, not1, tst1,
-					   movea, movhi */
-#define R_V850_NUM		17
-
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA	ELFDATA2LSB
-#else
-#define ELF_DATA	ELFDATA2MSB
-#endif
-#define ELF_ARCH	EM_V850
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE	4096
-
-
-#define ELF_CORE_COPY_REGS(_dest,_regs)				\
-	memcpy((char *) &_dest, (char *) _regs,			\
-	       sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this CPU supports.  This could be done in user space,
-   but it's not easy, and we've already done it here.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
-
-#define ELF_PLATFORM  (NULL)
-
-#define ELF_PLAT_INIT(_r, load_addr)					      \
-  do {									      \
-	 _r->gpr[0] =  _r->gpr[1] =  _r->gpr[2] =  _r->gpr[3] =		      \
-	 _r->gpr[4] =  _r->gpr[5] =  _r->gpr[6] =  _r->gpr[7] =		      \
-	 _r->gpr[8] =  _r->gpr[9] = _r->gpr[10] = _r->gpr[11] =		      \
-	_r->gpr[12] = _r->gpr[13] = _r->gpr[14] = _r->gpr[15] =		      \
-	_r->gpr[16] = _r->gpr[17] = _r->gpr[18] = _r->gpr[19] =		      \
-	_r->gpr[20] = _r->gpr[21] = _r->gpr[22] = _r->gpr[23] =		      \
-	_r->gpr[24] = _r->gpr[25] = _r->gpr[26] = _r->gpr[27] =		      \
-	_r->gpr[28] = _r->gpr[29] = _r->gpr[30] = _r->gpr[31] =		      \
-	0;								      \
-  } while (0)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-
-#endif /* __V850_ELF_H__ */
diff --git a/include/asm-v850/emergency-restart.h b/include/asm-v850/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-v850/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h
deleted file mode 100644
index d9df8ac48584..000000000000
--- a/include/asm-v850/entry.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ENTRY_H__
-#define __V850_ENTRY_H__
-
-
-#include <asm/ptrace.h>
-#include <asm/machdep.h>
-
-
-/* These are special variables using by the kernel trap/interrupt code
-   to save registers in, at a time when there are no spare registers we
-   can use to do so, and we can't depend on the value of the stack
-   pointer.  This means that they must be within a signed 16-bit
-   displacement of 0x00000000.  */
-
-#define KERNEL_VAR_SPACE_ADDR	R0_RAM_ADDR
-
-#ifdef __ASSEMBLY__
-#define KERNEL_VAR(addr)	addr[r0]
-#else
-#define KERNEL_VAR(addr)	(*(volatile unsigned long *)(addr))
-#endif
-
-/* Kernel stack pointer, 4 bytes.  */
-#define KSP_ADDR		(KERNEL_VAR_SPACE_ADDR +  0)
-#define KSP			KERNEL_VAR (KSP_ADDR)
-/* 1 if in kernel-mode, 0 if in user mode, 1 byte.  */
-#define KM_ADDR 		(KERNEL_VAR_SPACE_ADDR +  4)
-#define KM			KERNEL_VAR (KM_ADDR)
-/* Temporary storage for interrupt handlers, 4 bytes.  */
-#define INT_SCRATCH_ADDR	(KERNEL_VAR_SPACE_ADDR +  8)
-#define INT_SCRATCH		KERNEL_VAR (INT_SCRATCH_ADDR)
-/* Where the stack-pointer is saved when jumping to various sorts of
-   interrupt handlers.  ENTRY_SP is used by everything except NMIs,
-   which have their own location.  Higher-priority NMIs can clobber the
-   value written by a lower priority NMI, since they can't be disabled,
-   but that's OK, because only NMI0 (the lowest-priority one) is allowed
-   to return.  */
-#define ENTRY_SP_ADDR		(KERNEL_VAR_SPACE_ADDR + 12)
-#define ENTRY_SP		KERNEL_VAR (ENTRY_SP_ADDR)
-#define NMI_ENTRY_SP_ADDR	(KERNEL_VAR_SPACE_ADDR + 16)
-#define NMI_ENTRY_SP		KERNEL_VAR (NMI_ENTRY_SP_ADDR)
-
-#ifdef CONFIG_RESET_GUARD
-/* Used to detect unexpected resets (since the v850 has no MMU, any call
-   through a null pointer will jump to the reset vector).  We detect
-   such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
-   this location.  Properly resetting the machine stores zero there, so
-   it shouldn't trigger the guard; the power-on value is uncertain, but
-   it's unlikely to be RESET_GUARD_ACTIVE.  */
-#define RESET_GUARD_ADDR	(KERNEL_VAR_SPACE_ADDR + 28)
-#define RESET_GUARD		KERNEL_VAR (RESET_GUARD_ADDR)
-#define RESET_GUARD_ACTIVE	0xFAB4BEEF
-#endif /* CONFIG_RESET_GUARD */
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
-#define HIGHRES_TIMER_SLOW_TICKS     KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
-#endif /* CONFIG_V850E_HIGHRES_TIMER */
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_RESET_GUARD
-/* Turn off reset guard, so that resetting the machine works normally.
-   This should be called in the various machine_halt, etc., functions.  */
-static inline void disable_reset_guard (void)
-{
-	RESET_GUARD = 0;
-}
-#endif /* CONFIG_RESET_GUARD */
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* A `state save frame' is a struct pt_regs preceded by some extra space
-   suitable for a function call stack frame.  */
-
-/* Amount of room on the stack reserved for arguments and to satisfy the
-   C calling conventions, in addition to the space used by the struct
-   pt_regs that actually holds saved values.  */
-#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments.  */
-
-
-#ifdef __ASSEMBLY__
-
-/* The size of a state save frame.  */
-#define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
-
-#else /* !__ASSEMBLY__ */
-
-/* The size of a state save frame.  */
-#define STATE_SAVE_SIZE	       (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
-
-#endif /* __ASSEMBLY__ */
-
-
-/* Offset of the struct pt_regs in a state save frame.  */
-#define STATE_SAVE_PT_OFFSET	STATE_SAVE_ARG_SPACE
-
-
-#endif /* __V850_ENTRY_H__ */
diff --git a/include/asm-v850/errno.h b/include/asm-v850/errno.h
deleted file mode 100644
index 31c91df01205..000000000000
--- a/include/asm-v850/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_ERRNO_H__
-#define __V850_ERRNO_H__
-
-#include <asm-generic/errno.h>
-
-#endif /* __V850_ERRNO_H__ */
diff --git a/include/asm-v850/fb.h b/include/asm-v850/fb.h
deleted file mode 100644
index c7df38030992..000000000000
--- a/include/asm-v850/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-v850/fcntl.h b/include/asm-v850/fcntl.h
deleted file mode 100644
index 3af4d56776dd..000000000000
--- a/include/asm-v850/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __V850_FCNTL_H__
-#define __V850_FCNTL_H__
-
-#define O_DIRECTORY	040000	/* must be a directory */
-#define O_NOFOLLOW     0100000	/* don't follow links */
-#define O_DIRECT       0200000	/* direct disk access hint - currently ignored */
-#define O_LARGEFILE    0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* __V850_FCNTL_H__ */
diff --git a/include/asm-v850/flat.h b/include/asm-v850/flat.h
deleted file mode 100644
index 17f0ea566611..000000000000
--- a/include/asm-v850/flat.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * include/asm-v850/flat.h -- uClinux flat-format executables
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_FLAT_H__
-#define __V850_FLAT_H__
-
-/* The amount by which a relocation can exceed the program image limits
-   without being regarded as an error.  On the v850, the relocations of
-   some base-pointers can be offset by 0x8000 (to allow better usage of the
-   space offered by 16-bit signed offsets -- in most cases the offsets used
-   with such a base-pointer will be negative).  */
-
-#define	flat_reloc_valid(reloc, size)	((reloc) <= (size + 0x8000))
-
-#define	flat_stack_align(sp)		/* nothing needed */
-#define	flat_argvp_envp_on_stack()	0
-#define	flat_old_ram_flag(flags)	(flags)
-#define	flat_set_persistent(relval, p)	0
-
-/* We store the type of relocation in the top 4 bits of the `relval.' */
-
-/* Convert a relocation entry into an address.  */
-static inline unsigned long
-flat_get_relocate_addr (unsigned long relval)
-{
-	return relval & 0x0fffffff; /* Mask out top 4-bits */
-}
-
-#define flat_v850_get_reloc_type(relval) ((relval) >> 28)
-
-#define FLAT_V850_R_32		0 /* Normal 32-bit reloc */
-#define FLAT_V850_R_HI16S_LO15	1 /* High 16-bits + signed 15-bit low field */
-#define FLAT_V850_R_HI16S_LO16	2 /* High 16-bits + signed 16-bit low field */
-
-/* Extract the address to be relocated from the symbol reference at RP;
-   RELVAL is the raw relocation-table entry from which RP is derived.
-   For the v850, RP should always be half-word aligned.  */
-static inline unsigned long flat_get_addr_from_rp (unsigned long *rp,
-						   unsigned long relval,
-						   unsigned long flags,
-						   unsigned long *persistent)
-{
-	short *srp = (short *)rp;
-
-	switch (flat_v850_get_reloc_type (relval))
-	{
-	case FLAT_V850_R_32:
-		/* Simple 32-bit address.  */
-		return srp[0] | (srp[1] << 16);
-
-	case FLAT_V850_R_HI16S_LO16:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the 2nd word of the 32-bit instruction
-		   following that, respectively.  The low half is _signed_
-		   so we have to sign-extend it and add it to the upper
-		   half instead of simply or-ing them together.
-
-		   Unlike most relocated address, this one is stored in
-		   native (little-endian) byte-order to avoid problems with
-		   trashing the low-order bit, so we have to convert to
-		   network-byte-order before returning, as that's what the
-		   caller expects.  */
-		return htonl ((srp[0] << 16) + srp[2]);
-
-	case FLAT_V850_R_HI16S_LO15:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the upper 15 bits of the 2nd word of the
-		   32-bit instruction following that, respectively.  The
-		   low half is _signed_ so we have to sign-extend it and
-		   add it to the upper half instead of simply or-ing them
-		   together.  The lowest bit is always zero.
-
-		   Unlike most relocated address, this one is stored in
-		   native (little-endian) byte-order to avoid problems with
-		   trashing the low-order bit, so we have to convert to
-		   network-byte-order before returning, as that's what the
-		   caller expects.  */
-		return htonl ((srp[0] << 16) + (srp[2] & ~0x1));
-
-	default:
-		return ~0;	/* bogus value */
-	}
-}
-
-/* Insert the address ADDR into the symbol reference at RP;
-   RELVAL is the raw relocation-table entry from which RP is derived.
-   For the v850, RP should always be half-word aligned.  */
-static inline void flat_put_addr_at_rp (unsigned long *rp, unsigned long addr,
-					unsigned long relval)
-{
-	short *srp = (short *)rp;
-
-	switch (flat_v850_get_reloc_type (relval)) {
-	case FLAT_V850_R_32:
-		/* Simple 32-bit address.  */
-		srp[0] = addr & 0xFFFF;
-		srp[1] = (addr >> 16);
-		break;
-
-	case FLAT_V850_R_HI16S_LO16:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the 2nd word of the 32-bit instruction
-		   following that, respectively.  The low half is _signed_
-		   so we must carry its sign bit to the upper half before
-		   writing the upper half.  */
-		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
-		srp[2] = addr & 0xFFFF;
-		break;
-
-	case FLAT_V850_R_HI16S_LO15:
-		/* The high and low halves of the address are in the 16
-		   bits at RP, and the upper 15 bits of the 2nd word of the
-		   32-bit instruction following that, respectively.  The
-		   low half is _signed_ so we must carry its sign bit to
-		   the upper half before writing the upper half.  The
-		   lowest bit we preserve from the existing instruction.  */
-		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
-		srp[2] = (addr & 0xFFFE) | (srp[2] & 0x1);
-		break;
-	}
-}
-
-#endif /* __V850_FLAT_H__ */
diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
deleted file mode 100644
index 23aae666c718..000000000000
--- a/include/asm-v850/fpga85e2c.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
- *	FPGA implementation of V850E2/NA85E2C
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_FPGA85E2C_H__
-#define __V850_FPGA85E2C_H__
-
-#include <asm/v850e2.h>
-#include <asm/clinkage.h>
-
-
-#define CPU_MODEL	"v850e2/fpga85e2c"
-#define CPU_MODEL_LONG	"NEC V850E2/NA85E2C"
-#define PLATFORM	"fpga85e2c"
-#define PLATFORM_LONG	"NA85E2C FPGA implementation"
-
-
-/* `external ram'.  */
-#define ERAM_ADDR		0
-#define ERAM_SIZE		0x00100000 /* 1MB */
-
-
-/* FPGA specific control registers.  */
-
-/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
-   to stop execution.  */
-#define FLGREG_ADDR(n)		(0xFFE80100 + 2*(n))
-#define FLGREG(n)		(*(volatile unsigned char *)FLGREG_ADDR (n))
-#define FLGREG_NUM		2
-
-#define CSDEV_ADDR(n)		(0xFFE80110 + 2*(n))
-#define CSDEV(n)		(*(volatile unsigned char *)CSDEV_ADDR (n))
-
-
-/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384.  */
-#define IRQ_RPU(n)		(60 + (n))
-#define IRQ_RPU_NUM		4
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		64
-
-
-/* General-purpose timer.  */
-/* control/status register (can only be read/written via bit insns) */
-#define RPU_GTMC_ADDR		0xFFFFFB00
-#define RPU_GTMC		(*(volatile unsigned char *)RPU_GTMC_ADDR)
-#define RPU_GTMC_CE_BIT		7 /* clock enable (control) */
-#define RPU_GTMC_OV_BIT		6 /* overflow (status) */
-#define RPU_GTMC_CLK_BIT	1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
-/* 32-bit count (8 least-significant bits are always zero).  */
-#define RPU_GTM_ADDR		0xFFFFFB28
-#define RPU_GTM			(*(volatile unsigned long *)RPU_GTMC_ADDR)
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET		ERAM_ADDR /* minimum allocatable address */
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be accessible
-   using a load instruction relative to R0.  The FPGA implementation
-   actually has no on-chip RAM, so we use part of main ram just after the
-   interrupt vectors.  */
-#ifdef __ASSEMBLY__
-#define R0_RAM_ADDR		lo(C_SYMBOL_NAME(_r0_ram))
-#else
-extern char _r0_ram;
-#define R0_RAM_ADDR		((unsigned long)&_r0_ram);
-#endif
-
-
-#endif /* __V850_FPGA85E2C_H__ */
diff --git a/include/asm-v850/futex.h b/include/asm-v850/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/include/asm-v850/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h
deleted file mode 100644
index 0c4bce753c7e..000000000000
--- a/include/asm-v850/gbus_int.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_GBUS_INT_H__
-#define __V850_GBUS_INT_H__
-
-
-/* The GBUS interrupt interface has 32 interrupts shared among 4
-   processor interrupts.  The 32 GBUS interrupts are divided into two
-   sets of 16 each, for allocating among control registers, etc (there
-   are two of each control register, with bits 0-15 controlling an
-   interrupt each).  */
-
-/* The GBUS interrupts themselves.  */
-#define IRQ_GBUS_INT(n)		(GBUS_INT_BASE_IRQ + (n))
-#define IRQ_GBUS_INT_NUM	32
-
-/* Control registers.  */
-#define GBUS_INT_STATUS_ADDR(w)	(GBUS_INT_BASE_ADDR + (w)*0x40)
-#define GBUS_INT_STATUS(w)	(*(volatile u16 *)GBUS_INT_STATUS_ADDR(w))
-#define GBUS_INT_CLEAR_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40)
-#define GBUS_INT_CLEAR(w)	(*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w))
-#define GBUS_INT_EDGE_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40)
-#define GBUS_INT_EDGE(w)	(*(volatile u16 *)GBUS_INT_EDGE_ADDR(w))
-#define GBUS_INT_POLARITY_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40)
-#define GBUS_INT_POLARITY(w)	(*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w))
-/* This allows enabling interrupt bits in word W for interrupt GINTn.  */
-#define GBUS_INT_ENABLE_ADDR(w, n) \
-   (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20)
-#define GBUS_INT_ENABLE(w, n)	(*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n))
-
-/* Mapping between kernel interrupt numbers and hardware control regs/bits.  */
-#define GBUS_INT_BITS_PER_WORD	16
-#define GBUS_INT_NUM_WORDS	(IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD)
-#define GBUS_INT_IRQ_WORD(irq)	(((irq) - GBUS_INT_BASE_IRQ) >> 4)
-#define GBUS_INT_IRQ_BIT(irq)	(((irq) - GBUS_INT_BASE_IRQ) & 0xF)
-#define GBUS_INT_IRQ_MASK(irq)	(1 << GBUS_INT_IRQ_BIT(irq))
-
-
-/* Possible priorities for GBUS interrupts.  */
-#define GBUS_INT_PRIORITY_HIGH		2
-#define GBUS_INT_PRIORITY_MEDIUM	4
-#define GBUS_INT_PRIORITY_LOW		6
-
-
-#ifndef __ASSEMBLY__
-
-/* Enable interrupt handling for interrupt IRQ.  */
-extern void gbus_int_enable_irq (unsigned irq);
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `gbus_int_clear_pending_irq'.  */
-extern void gbus_int_disable_irq (unsigned irq);
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-extern int gbus_int_irq_enabled (unsigned irq);
-/* Disable all GBUS irqs.  */
-extern void gbus_int_disable_irqs (void);
-/* Clear any pending interrupts for IRQ.  */
-extern void gbus_int_clear_pending_irq (unsigned irq);
-/* Return true if interrupt IRQ is pending (but disabled).  */
-extern int gbus_int_irq_pending (unsigned irq);
-
-
-struct gbus_int_irq_init {
-	const char *name;	/* name of interrupt type */
-
-	/* Range of kernel irq numbers for this type:
-	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
-	unsigned base, num, interval;
-
-	unsigned priority;	/* interrupt priority to assign */
-};
-struct hw_interrupt_type;	/* fwd decl */
-
-/* Initialize HW_IRQ_TYPES for GBUS irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
-				     struct hw_interrupt_type *hw_irq_types);
-
-/* Initialize GBUS interrupts.  */
-extern void gbus_int_init_irqs (void);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_GBUS_INT_H__ */
diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h
deleted file mode 100644
index 04e20127c5af..000000000000
--- a/include/asm-v850/hardirq.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __V850_HARDIRQ_H__
-#define __V850_HARDIRQ_H__
-
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-#include <asm/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* __V850_HARDIRQ_H__ */
diff --git a/include/asm-v850/highres_timer.h b/include/asm-v850/highres_timer.h
deleted file mode 100644
index 486fb49ceab6..000000000000
--- a/include/asm-v850/highres_timer.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-v850/highres_timer.h -- High resolution timing routines
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_HIGHRES_TIMER_H__
-#define __V850_HIGHRES_TIMER_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/time.h>
-#endif
-
-#include <asm/entry.h>
-
-
-/* Frequency of the `slow ticks' (one tick each time the fast-tick
-   counter overflows).  */
-#define HIGHRES_TIMER_SLOW_TICK_RATE	25
-
-/* Which timer in the V850E `Timer D' we use.  */
-#define HIGHRES_TIMER_TIMER_D_UNIT	3
-
-
-#ifndef __ASSEMBLY__
-
-extern void highres_timer_start (void), highres_timer_stop (void);
-extern void highres_timer_reset (void);
-extern void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks);
-extern void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
-					    struct timeval *tv);
-extern void highres_timer_read (struct timeval *tv);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_HIGHRES_TIMER_H__ */
diff --git a/include/asm-v850/hw_irq.h b/include/asm-v850/hw_irq.h
deleted file mode 100644
index 043e94bb6bd8..000000000000
--- a/include/asm-v850/hw_irq.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __V850_HW_IRQ_H__
-#define __V850_HW_IRQ_H__
-
-#endif /* __V850_HW_IRQ_H__ */
diff --git a/include/asm-v850/io.h b/include/asm-v850/io.h
deleted file mode 100644
index cdad251fba9f..000000000000
--- a/include/asm-v850/io.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * include/asm-v850/io.h -- Misc I/O operations
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_IO_H__
-#define __V850_IO_H__
-
-#define IO_SPACE_LIMIT 0xFFFFFFFF
-
-#define readb(addr) \
-  ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
-  ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
-  ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
-
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
-
-#define writeb(val, addr) \
-  (void)((*(volatile unsigned char *) (addr)) = (val))
-#define writew(val, addr) \
-  (void)((*(volatile unsigned short *) (addr)) = (val))
-#define writel(val, addr) \
-  (void)((*(volatile unsigned int *) (addr)) = (val))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define inb(addr)	readb (addr)
-#define inw(addr)	readw (addr)
-#define inl(addr)	readl (addr)
-#define outb(x, addr)	((void) writeb (x, addr))
-#define outw(x, addr)	((void) writew (x, addr))
-#define outl(x, addr)	((void) writel (x, addr))
-
-#define inb_p(port)		inb((port))
-#define outb_p(val, port)	outb((val), (port))
-#define inw_p(port)		inw((port))
-#define outw_p(val, port)	outw((val), (port))
-#define inl_p(port)		inl((port))
-#define outl_p(val, port)	outl((val), (port))
-
-static inline void insb (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned char *p = dst;
-	while (count--)
-		*p++ = inb (port);
-}
-static inline void insw (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned short *p = dst;
-	while (count--)
-		*p++ = inw (port);
-}
-static inline void insl (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned long *p = dst;
-	while (count--)
-		*p++ = inl (port);
-}
-
-static inline void
-outsb (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned char *p = src;
-	while (count--)
-		outb (*p++, port);
-}
-static inline void
-outsw (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned short *p = src;
-	while (count--)
-		outw (*p++, port);
-}
-static inline void
-outsl (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned long *p = src;
-	while (count--)
-		outl (*p++, port);
-}
-
-
-/* Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to
-   long before casting it to a pointer to avoid compiler warnings.  */
-#define ioremap(physaddr, size)	((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr)		((void)0)
-
-#define ioremap_nocache(physaddr, size)		ioremap (physaddr, size)
-#define ioremap_writethrough(physaddr, size)	ioremap (physaddr, size)
-#define ioremap_fullcache(physaddr, size)	ioremap (physaddr, size)
-
-#define ioread8(addr)		readb (addr)
-#define ioread16(addr)		readw (addr)
-#define ioread32(addr)		readl (addr)
-#define iowrite8(val, addr)	writeb (val, addr)
-#define iowrite16(val, addr)	writew (val, addr)
-#define iowrite32(val, addr)	writel (val, addr)
-
-#define mmiowb()
-
-#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
-#if 0
-/* This is really stupid; don't define it.  */
-#define page_to_bus(page)       page_to_phys (page)
-#endif
-
-/* Conversion between virtual and physical mappings.  */
-#define phys_to_virt(addr)	((void *)__phys_to_virt (addr))
-#define virt_to_phys(addr)	((unsigned long)__virt_to_phys (addr))
-
-#define memcpy_fromio(dst, src, len) memcpy (dst, (void *)src, len)
-#define memcpy_toio(dst, src, len) memcpy ((void *)dst, src, len)
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __V850_IO_H__ */
diff --git a/include/asm-v850/ioctl.h b/include/asm-v850/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-v850/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-v850/ioctls.h b/include/asm-v850/ioctls.h
deleted file mode 100644
index 5313abd5f388..000000000000
--- a/include/asm-v850/ioctls.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef __V850_IOCTLS_H__
-#define __V850_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
-
-#endif /* __V850_IOCTLS_H__ */
diff --git a/include/asm-v850/ipcbuf.h b/include/asm-v850/ipcbuf.h
deleted file mode 100644
index d8cbe9886d95..000000000000
--- a/include/asm-v850/ipcbuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __V850E_IPCBUF_H__
-#define __V850E_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for v850e architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __V850E_IPCBUF_H__ */
diff --git a/include/asm-v850/irq.h b/include/asm-v850/irq.h
deleted file mode 100644
index 7d0d4cd1ce54..000000000000
--- a/include/asm-v850/irq.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-v850/irq.h -- Machine interrupt handling
- *
- *  Copyright (C) 2001,02,04  NEC Electronics Corporation
- *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_IRQ_H__
-#define __V850_IRQ_H__
-
-#include <asm/machdep.h>
-
-/* Default NUM_MACH_IRQS.  */
-#ifndef NUM_MACH_IRQS
-#define NUM_MACH_IRQS	NUM_CPU_IRQS
-#endif
-
-/* NMIs have IRQ numbers from FIRST_NMI to FIRST_NMI+NUM_NMIS-1.  */
-#define FIRST_NMI	NUM_MACH_IRQS
-#define IRQ_NMI(n)	(FIRST_NMI + (n))
-/* v850 processors have 3 non-maskable interrupts.  */
-#define NUM_NMIS	3
-
-/* Includes both maskable and non-maskable irqs.  */
-#define NR_IRQS		(NUM_MACH_IRQS + NUM_NMIS)
-
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs;
-struct hw_interrupt_type;
-struct irqaction;
-
-#define irq_canonicalize(irq)	(irq)
-
-/* Initialize irq handling for IRQs.
-   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
-   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
-extern void
-init_irq_handlers (int base_irq, int num, int interval,
-		   struct hw_interrupt_type *irq_type);
-
-/* Handle interrupt IRQ.  REGS are the registers at the time of ther
-   interrupt.  */
-extern unsigned int handle_irq (int irq, struct pt_regs *regs);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __V850_IRQ_H__ */
diff --git a/include/asm-v850/irq_regs.h b/include/asm-v850/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-v850/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-v850/kdebug.h b/include/asm-v850/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/include/asm-v850/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-v850/kmap_types.h b/include/asm-v850/kmap_types.h
deleted file mode 100644
index 3288976b161f..000000000000
--- a/include/asm-v850/kmap_types.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __V850_KMAP_TYPES_H__
-#define __V850_KMAP_TYPES_H__
-
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_TYPE_NR
-};
-
-#endif /* __V850_KMAP_TYPES_H__ */
diff --git a/include/asm-v850/kvm.h b/include/asm-v850/kvm.h
deleted file mode 100644
index 3f729b79febc..000000000000
--- a/include/asm-v850/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_V850_H
-#define __LINUX_KVM_V850_H
-
-/* v850 does not support KVM */
-
-#endif
diff --git a/include/asm-v850/linkage.h b/include/asm-v850/linkage.h
deleted file mode 100644
index b6185d3cfe68..000000000000
--- a/include/asm-v850/linkage.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#ifdef __ASSEMBLY__
-#include <asm/asm.h>
-#endif
-
-#endif
diff --git a/include/asm-v850/local.h b/include/asm-v850/local.h
deleted file mode 100644
index 705148abe276..000000000000
--- a/include/asm-v850/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_LOCAL_H__
-#define __V850_LOCAL_H__
-
-#include <asm-generic/local.h>
-
-#endif /* __V850_LOCAL_H__ */
diff --git a/include/asm-v850/ma.h b/include/asm-v850/ma.h
deleted file mode 100644
index 89e66473a176..000000000000
--- a/include/asm-v850/ma.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/asm-v850/ma.h -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MA_H__
-#define __V850_MA_H__
-
-/* The MA series uses the V850E cpu core.  */
-#include <asm/v850e.h>
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  The amount
-   varies between chip models, but there's always at least 4K, and it
-   should always start at FFFFC000.  */
-#define R0_RAM_ADDR			0xFFFFC000
-
-
-/* MA series UART details.  */
-#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	ma_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void ma_uart_pre_configure (unsigned chan,
-				   unsigned cflags, unsigned baud);
-#endif
-
-
-/* MA series timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-
-/* MA series timer D details.  */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
-
-
-/* Port 0 */
-/* Direct I/O.  Bits 0-7 are pins P00-P07.  */
-#define MA_PORT0_IO_ADDR		0xFFFFF400
-#define MA_PORT0_IO			(*(volatile u8 *)MA_PORT0_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define MA_PORT0_PM_ADDR		0xFFFFF420
-#define MA_PORT0_PM			(*(volatile u8 *)MA_PORT0_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define MA_PORT0_PMC_ADDR		0xFFFFF440
-#define MA_PORT0_PMC			(*(volatile u8 *)MA_PORT0_PMC_ADDR)
-/* Port function control (for P04-P07, 0 = IRQ, 1 = DMARQ).  */
-#define MA_PORT0_PFC_ADDR		0xFFFFF460
-#define MA_PORT0_PFC			(*(volatile u8 *)MA_PORT0_PFC_ADDR)
-
-/* Port 1 */
-/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
-#define MA_PORT1_IO_ADDR		0xFFFFF402
-#define MA_PORT1_IO			(*(volatile u8 *)MA_PORT1_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define MA_PORT1_PM_ADDR		0xFFFFF420
-#define MA_PORT1_PM			(*(volatile u8 *)MA_PORT1_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define MA_PORT1_PMC_ADDR		0xFFFFF442
-#define MA_PORT1_PMC			(*(volatile u8 *)MA_PORT1_PMC_ADDR)
-
-/* Port 4 */
-/* Direct I/O.  Bits 0-5 are pins P40-P45.  */
-#define MA_PORT4_IO_ADDR		0xFFFFF408
-#define MA_PORT4_IO			(*(volatile u8 *)MA_PORT4_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define MA_PORT4_PM_ADDR		0xFFFFF428
-#define MA_PORT4_PM			(*(volatile u8 *)MA_PORT4_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define MA_PORT4_PMC_ADDR		0xFFFFF448
-#define MA_PORT4_PMC			(*(volatile u8 *)MA_PORT4_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = CSI, 1 = UART).  */
-#define MA_PORT4_PFC_ADDR		0xFFFFF468
-#define MA_PORT4_PFC			(*(volatile u8 *)MA_PORT4_PFC_ADDR)
-
-
-#ifndef __ASSEMBLY__
-
-/* Initialize MA chip interrupts.  */
-extern void ma_init_irqs (void);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_MA_H__ */
diff --git a/include/asm-v850/ma1.h b/include/asm-v850/ma1.h
deleted file mode 100644
index ede1f1de2b7a..000000000000
--- a/include/asm-v850/ma1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-v850/ma1.h -- V850E/MA1 cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MA1_H__
-#define __V850_MA1_H__
-
-/* Inherit more generic details from MA series.  */
-#include <asm/ma.h>
-
-
-#define CPU_MODEL	"v850e/ma1"
-#define CPU_MODEL_LONG	"NEC V850E/MA1"
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTOV(n)	(n)	/* 0-3 */
-#define IRQ_INTOV_NUM	4
-#define IRQ_INTP(n)	(0x4  + (n)) /* Pnnn (pin) interrupts */
-#define IRQ_INTP_NUM	24
-#define IRQ_INTCMD(n)	(0x1c + (n)) /* interval timer interrupts 0-3 */
-#define IRQ_INTCMD_NUM	4
-#define IRQ_INTDMA(n)	(0x20 + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM	4
-#define IRQ_INTCSI(n)	(0x24 + (n)*4)/* CSI 0-2 transmit/receive completion */
-#define IRQ_INTCSI_NUM	3
-#define IRQ_INTSER(n)	(0x25 + (n)*4) /* UART 0-2 reception error */
-#define IRQ_INTSER_NUM	3
-#define IRQ_INTSR(n)	(0x26 + (n)*4) /* UART 0-2 reception completion */
-#define IRQ_INTSR_NUM	3
-#define IRQ_INTST(n)	(0x27 + (n)*4) /* UART 0-2 transmission completion */
-#define IRQ_INTST_NUM	3
-
-#define NUM_CPU_IRQS	0x30
-
-
-/* The MA1 has a UART with 3 channels.  */
-#define V850E_UART_NUM_CHANNELS	3
-
-
-#endif /* __V850_MA1_H__ */
diff --git a/include/asm-v850/machdep.h b/include/asm-v850/machdep.h
deleted file mode 100644
index f1e3b8b91508..000000000000
--- a/include/asm-v850/machdep.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-v850/machdep.h -- Machine-dependent definitions
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACHDEP_H__
-#define __V850_MACHDEP_H__
-
-
-/* chips */
-#ifdef CONFIG_V850E_MA1
-#include <asm/ma1.h>
-#endif
-#ifdef CONFIG_V850E_ME2
-#include <asm/me2.h>
-#endif
-#ifdef CONFIG_V850E_TEG
-#include <asm/teg.h>
-#endif
-
-/* These are both chips _and_ platforms, so put them in the middle... */
-#ifdef CONFIG_V850E2_ANNA
-#include <asm/anna.h>
-#endif
-#ifdef CONFIG_V850E_AS85EP1
-#include <asm/as85ep1.h>
-#endif
-
-/* platforms */
-#ifdef CONFIG_RTE_CB_MA1
-#include <asm/rte_ma1_cb.h>
-#endif
-#ifdef CONFIG_RTE_CB_ME2
-#include <asm/rte_me2_cb.h>
-#endif
-#ifdef CONFIG_RTE_CB_NB85E
-#include <asm/rte_nb85e_cb.h>
-#endif
-#ifdef CONFIG_V850E_SIM
-#include <asm/sim.h>
-#endif
-#ifdef CONFIG_V850E2_SIM85E2C
-#include <asm/sim85e2c.h>
-#endif
-#ifdef CONFIG_V850E2_SIM85E2S
-#include <asm/sim85e2s.h>
-#endif
-#ifdef CONFIG_V850E2_FPGA85E2C
-#include <asm/fpga85e2c.h>
-#endif
-
-#endif /* __V850_MACHDEP_H__ */
diff --git a/include/asm-v850/macrology.h b/include/asm-v850/macrology.h
deleted file mode 100644
index 37abf874832c..000000000000
--- a/include/asm-v850/macrology.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-v850/macrology.h -- Various useful CPP macros
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#define macrology_paste(arg1, arg2)	macrology_paste_1(arg1, arg2)
-#define macrology_paste_1(arg1, arg2)	arg1 ## arg2
-#define macrology_stringify(sym)	macrology_stringify_1(sym)
-#define macrology_stringify_1(sym)	#sym
diff --git a/include/asm-v850/me2.h b/include/asm-v850/me2.h
deleted file mode 100644
index ac7c9ce0bdc1..000000000000
--- a/include/asm-v850/me2.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * include/asm-v850/me2.h -- V850E/ME2 cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ME2_H__
-#define __V850_ME2_H__
-
-#include <asm/v850e.h>
-#include <asm/v850e_cache.h>
-
-
-#define CPU_MODEL	"v850e/me2"
-#define CPU_MODEL_LONG	"NEC V850E/ME2"
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTP(n)       (n) /* Pnnn (pin) interrupts */
-#define IRQ_INTP_NUM      31
-#define IRQ_INTCMD(n)     (0x31 + (n)) /* interval timer interrupts 0-3 */
-#define IRQ_INTCMD_NUM    4
-#define IRQ_INTDMA(n)     (0x41 + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM    4
-#define IRQ_INTUBTIRE(n)  (0x49 + (n)*5)/* UARTB 0-1 reception error */
-#define IRQ_INTUBTIRE_NUM 2
-#define IRQ_INTUBTIR(n)   (0x4a + (n)*5) /* UARTB 0-1 reception complete */
-#define IRQ_INTUBTIR_NUM  2
-#define IRQ_INTUBTIT(n)   (0x4b + (n)*5) /* UARTB 0-1 transmission complete */
-#define IRQ_INTUBTIT_NUM  2
-#define IRQ_INTUBTIF(n)   (0x4c + (n)*5) /* UARTB 0-1 FIFO trans. complete */
-#define IRQ_INTUBTIF_NUM  2
-#define IRQ_INTUBTITO(n)  (0x4d + (n)*5) /* UARTB 0-1 reception timeout */
-#define IRQ_INTUBTITO_NUM 2
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		0x59 /* V850E/ME2 */
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  */
-#define R0_RAM_ADDR			0xFFFFB000 /* V850E/ME2 */
-
-
-/* V850E/ME2 UARTB details.*/
-#define V850E_UART_NUM_CHANNELS		2
-#define V850E_UARTB_BASE_FREQ		(CPU_CLOCK_FREQ / 4)
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	me2_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void me2_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud);
-#endif /* __ASSEMBLY__ */
-
-
-/* V850E/ME2 timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-
-/* V850E/ME2 timer D details.  */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		(CPU_CLOCK_FREQ / 2)
-
-
-/* Select iRAM mode.  */
-#define ME2_IRAMM_ADDR			0xFFFFF80A
-#define ME2_IRAMM			(*(volatile u8*)ME2_IRAMM_ADDR)
-
-
-/* Interrupt edge-detection configuration.  INTF(n) and INTR(n) are only
-   valid for n == 1, 2, or 5.  */
-#define ME2_INTF_ADDR(n)		(0xFFFFFC00 + (n) * 0x2)
-#define ME2_INTF(n)			(*(volatile u8*)ME2_INTF_ADDR(n))
-#define ME2_INTR_ADDR(n)		(0xFFFFFC20 + (n) * 0x2)
-#define ME2_INTR(n)			(*(volatile u8*)ME2_INTR_ADDR(n))
-#define ME2_INTFAL_ADDR			0xFFFFFC10
-#define ME2_INTFAL			(*(volatile u8*)ME2_INTFAL_ADDR)
-#define ME2_INTRAL_ADDR			0xFFFFFC30
-#define ME2_INTRAL			(*(volatile u8*)ME2_INTRAL_ADDR)
-#define ME2_INTFDH_ADDR			0xFFFFFC16
-#define ME2_INTFDH			(*(volatile u16*)ME2_INTFDH_ADDR)
-#define ME2_INTRDH_ADDR			0xFFFFFC36
-#define ME2_INTRDH			(*(volatile u16*)ME2_INTRDH_ADDR)
-#define ME2_SESC_ADDR(n)		(0xFFFFF609 + (n) * 0x10)
-#define ME2_SESC(n)			(*(volatile u8*)ME2_SESC_ADDR(n))
-#define ME2_SESA10_ADDR			0xFFFFF5AD
-#define ME2_SESA10			(*(volatile u8*)ME2_SESA10_ADDR)
-#define ME2_SESA11_ADDR			0xFFFFF5DD
-#define ME2_SESA11			(*(volatile u8*)ME2_SESA11_ADDR)
-
-
-/* Port 1 */
-/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
-#define ME2_PORT1_IO_ADDR		0xFFFFF402
-#define ME2_PORT1_IO			(*(volatile u8 *)ME2_PORT1_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT1_PM_ADDR		0xFFFFF422
-#define ME2_PORT1_PM			(*(volatile u8 *)ME2_PORT1_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT1_PMC_ADDR		0xFFFFF442
-#define ME2_PORT1_PMC			(*(volatile u8 *)ME2_PORT1_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = CSI30, 1 = UARTB0 ).  */
-#define ME2_PORT1_PFC_ADDR		0xFFFFF462
-#define ME2_PORT1_PFC			(*(volatile u8 *)ME2_PORT1_PFC_ADDR)
-
-/* Port 2 */
-/* Direct I/O.  Bits 0-3 are pins P20-P25.  */
-#define ME2_PORT2_IO_ADDR		0xFFFFF404
-#define ME2_PORT2_IO			(*(volatile u8 *)ME2_PORT2_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT2_PM_ADDR		0xFFFFF424
-#define ME2_PORT2_PM			(*(volatile u8 *)ME2_PORT2_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT2_PMC_ADDR		0xFFFFF444
-#define ME2_PORT2_PMC			(*(volatile u8 *)ME2_PORT2_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = INTP2x, 1 = UARTB1 ).  */
-#define ME2_PORT2_PFC_ADDR		0xFFFFF464
-#define ME2_PORT2_PFC			(*(volatile u8 *)ME2_PORT2_PFC_ADDR)
-
-/* Port 5 */
-/* Direct I/O.  Bits 0-5 are pins P50-P55.  */
-#define ME2_PORT5_IO_ADDR		0xFFFFF40A
-#define ME2_PORT5_IO			(*(volatile u8 *)ME2_PORT5_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT5_PM_ADDR		0xFFFFF42A
-#define ME2_PORT5_PM			(*(volatile u8 *)ME2_PORT5_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT5_PMC_ADDR		0xFFFFF44A
-#define ME2_PORT5_PMC			(*(volatile u8 *)ME2_PORT5_PMC_ADDR)
-/* Port function control ().  */
-#define ME2_PORT5_PFC_ADDR		0xFFFFF46A
-#define ME2_PORT5_PFC			(*(volatile u8 *)ME2_PORT5_PFC_ADDR)
-
-/* Port 6 */
-/* Direct I/O.  Bits 5-7 are pins P65-P67.  */
-#define ME2_PORT6_IO_ADDR		0xFFFFF40C
-#define ME2_PORT6_IO			(*(volatile u8 *)ME2_PORT6_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT6_PM_ADDR		0xFFFFF42C
-#define ME2_PORT6_PM			(*(volatile u8 *)ME2_PORT6_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT6_PMC_ADDR		0xFFFFF44C
-#define ME2_PORT6_PMC			(*(volatile u8 *)ME2_PORT6_PMC_ADDR)
-/* Port function control ().  */
-#define ME2_PORT6_PFC_ADDR		0xFFFFF46C
-#define ME2_PORT6_PFC			(*(volatile u8 *)ME2_PORT6_PFC_ADDR)
-
-/* Port 7 */
-/* Direct I/O.  Bits 2-7 are pins P72-P77.  */
-#define ME2_PORT7_IO_ADDR		0xFFFFF40E
-#define ME2_PORT7_IO			(*(volatile u8 *)ME2_PORT7_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define ME2_PORT7_PM_ADDR		0xFFFFF42E
-#define ME2_PORT7_PM			(*(volatile u8 *)ME2_PORT7_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define ME2_PORT7_PMC_ADDR		0xFFFFF44E
-#define ME2_PORT7_PMC			(*(volatile u8 *)ME2_PORT7_PMC_ADDR)
-/* Port function control ().  */
-#define ME2_PORT7_PFC_ADDR		0xFFFFF46E
-#define ME2_PORT7_PFC			(*(volatile u8 *)ME2_PORT7_PFC_ADDR)
-
-
-#ifndef __ASSEMBLY__
-/* Initialize V850E/ME2 chip interrupts.  */
-extern void me2_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_ME2_H__ */
diff --git a/include/asm-v850/mman.h b/include/asm-v850/mman.h
deleted file mode 100644
index edbf6edbfb37..000000000000
--- a/include/asm-v850/mman.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __V850_MMAN_H__
-#define __V850_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __V850_MMAN_H__ */
diff --git a/include/asm-v850/mmu.h b/include/asm-v850/mmu.h
deleted file mode 100644
index 267768c66ef6..000000000000
--- a/include/asm-v850/mmu.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Copyright (C) 2002, 2005, David McCullough <davidm@snapgear.com> */
-
-#ifndef __V850_MMU_H__
-#define __V850_MMU_H__
-
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-
-#endif /* __V850_MMU_H__ */
diff --git a/include/asm-v850/mmu_context.h b/include/asm-v850/mmu_context.h
deleted file mode 100644
index 01daacd5474e..000000000000
--- a/include/asm-v850/mmu_context.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __V850_MMU_CONTEXT_H__
-#define __V850_MMU_CONTEXT_H__
-
-#include <asm-generic/mm_hooks.h>
-
-#define destroy_context(mm)		((void)0)
-#define init_new_context(tsk,mm)	0
-#define switch_mm(prev,next,tsk)	((void)0)
-#define deactivate_mm(tsk,mm)		do { } while (0)
-#define activate_mm(prev,next)		((void)0)
-#define enter_lazy_tlb(mm,tsk)		((void)0)
-
-#endif /* __V850_MMU_CONTEXT_H__ */
diff --git a/include/asm-v850/module.h b/include/asm-v850/module.h
deleted file mode 100644
index 2c2f4944f09f..000000000000
--- a/include/asm-v850/module.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/module.h -- Architecture-specific module hooks
- *
- *  Copyright (C) 2001,02,03,04  NEC Corporation
- *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2001,03  Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from include/asm-ppc/module.h
- */
-
-#ifndef __V850_MODULE_H__
-#define __V850_MODULE_H__
-
-#define MODULE_SYMBOL_PREFIX "_"
-
-struct v850_plt_entry
-{
-	/* Indirect jump instruction sequence (6-byte mov + 2-byte jr).  */
-	unsigned long tramp[2];
-};
-
-struct mod_arch_specific
-{
-	/* Indices of PLT sections within module. */
-	unsigned int core_plt_section, init_plt_section;
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-/* Make empty sections for module_frob_arch_sections to expand. */
-#ifdef MODULE
-asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
-asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
-#endif
-
-/* We don't do exception tables.  */
-struct exception_table_entry;
-static inline const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-	return 0;
-}
-#define ARCH_HAS_SEARCH_EXTABLE
-static inline void
-sort_extable(struct exception_table_entry *start,
-	     struct exception_table_entry *finish)
-{
-	/* nada */
-}
-#define ARCH_HAS_SORT_EXTABLE
-
-#endif /* __V850_MODULE_H__ */
diff --git a/include/asm-v850/msgbuf.h b/include/asm-v850/msgbuf.h
deleted file mode 100644
index ed07dbd01637..000000000000
--- a/include/asm-v850/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __V850_MSGBUF_H__
-#define __V850_MSGBUF_H__
-
-/* 
- * The msqid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* __V850_MSGBUF_H__ */
diff --git a/include/asm-v850/mutex.h b/include/asm-v850/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-v850/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-v850/namei.h b/include/asm-v850/namei.h
deleted file mode 100644
index ee8339b23843..000000000000
--- a/include/asm-v850/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-v850/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __V850_NAMEI_H__
-#define __V850_NAMEI_H__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __V850_NAMEI_H__ */
diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h
deleted file mode 100644
index 74a539a9bd59..000000000000
--- a/include/asm-v850/page.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * include/asm-v850/page.h -- VM ops
- *
- *  Copyright (C) 2001,02,03,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PAGE_H__
-#define __V850_PAGE_H__
-
-#include <asm/machdep.h>
-
-
-#define PAGE_SHIFT	12
-#define PAGE_SIZE       (1UL << PAGE_SHIFT)
-#define PAGE_MASK       (~(PAGE_SIZE-1))
-
-
-/*
- * PAGE_OFFSET -- the first address of the first page of memory. For archs with
- * no MMU this corresponds to the first free page in physical memory (aligned
- * on a page boundary).
- */
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET  0x0000000
-#endif
-
-
-#ifndef __ASSEMBLY__
-
-#define STRICT_MM_TYPECHECKS
-
-#define clear_page(page)	memset ((void *)(page), 0, PAGE_SIZE)
-#define copy_page(to, from)	memcpy ((void *)(to), (void *)from, PAGE_SIZE)
-
-#define clear_user_page(addr, vaddr, page)	\
-	do { 	clear_page(addr);		\
-		flush_dcache_page(page);	\
-	} while (0)
-#define copy_user_page(to, from, vaddr, page)	\
-	do {	copy_page(to, from);		\
-		flush_dcache_page(page);	\
-	} while (0)
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x)      ((x).pte)
-#define pmd_val(x)      ((x).pmd)
-#define pgd_val(x)      ((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgd(x)        ((pgd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-#else /* !STRICT_MM_TYPECHECKS */
-/*
- * .. while these make it easier on the compiler
- */
-
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)      (x)
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
-
-/* No current v850 processor has virtual memory.  */
-#define __virt_to_phys(addr)	(addr)
-#define __phys_to_virt(addr)	(addr)
-
-#define virt_to_pfn(kaddr)	(__virt_to_phys (kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn)	__phys_to_virt ((pfn) << PAGE_SHIFT)
-
-#define MAP_NR(kaddr) \
-  (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(kaddr)	(mem_map + MAP_NR (kaddr))
-#define page_to_virt(page) \
-  ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
-#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
-
-#define	virt_addr_valid(kaddr)						\
-  (((void *)(kaddr) >= (void *)PAGE_OFFSET) && MAP_NR (kaddr) < max_mapnr)
-
-
-#define __pa(x)		     __virt_to_phys ((unsigned long)(x))
-#define __va(x)		     ((void *)__phys_to_virt ((unsigned long)(x)))
-
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif /* __V850_PAGE_H__ */
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
deleted file mode 100644
index 4391f5fe0204..000000000000
--- a/include/asm-v850/param.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-v850/param.h -- Varions kernel parameters
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PARAM_H__
-#define __V850_PARAM_H__
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ
-# define USER_HZ	100
-# define CLOCKS_PER_SEC	USER_HZ
-#else
-# define HZ		100
-#endif
-
-#endif /* __V850_PARAM_H__ */
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
deleted file mode 100644
index de2a7d0a81cc..000000000000
--- a/include/asm-v850/pci.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * include/asm-v850/pci.h -- PCI support
- *
- *  Copyright (C) 2001,02,05  NEC Corporation
- *  Copyright (C) 2001,02,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PCI_H__
-#define __V850_PCI_H__
-
-/* Get any platform-dependent definitions.  */
-#include <asm/machdep.h>
-
-#define pcibios_scan_all_fns(a, b)	0
-
-/* Generic declarations.  */
-
-struct scatterlist;
-
-extern void pcibios_set_master (struct pci_dev *dev);
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
-   32-bit PCI bus mastering address to use is returned.  the device owns
-   this memory until either pci_unmap_single or pci_dma_sync_single_for_cpu is
-   performed.  */
-extern dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir);
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
-   PDEV, at DMA_ADDR.  */
-extern void
-pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		  int dir);
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-extern void
-pci_dma_sync_single_for_cpu (struct pci_dev *dev, dma_addr_t dma_addr,
-			     size_t size, int dir);
-
-extern void
-pci_dma_sync_single_for_device (struct pci_dev *dev, dma_addr_t dma_addr,
-				size_t size, int dir);
-
-
-/* Do multiple DMA mappings at once.  */
-extern int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir);
-
-/* Unmap multiple DMA mappings at once.  */
-extern void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,
-	      int dir);
-
-/* SG-list versions of pci_dma_sync functions.  */
-extern void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
-			 struct scatterlist *sg, int sg_len,
-			 int dir);
-extern void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
-			    struct scatterlist *sg, int sg_len,
-			    int dir);
-
-#define pci_map_page(dev, page, offs, size, dir) \
-  pci_map_single(dev, (page_address(page) + (offs)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
-  pci_unmap_single(dev, addr, sz, dir)
-
-/* Test for pci_map_single or pci_map_page having generated an error.  */
-static inline int
-pci_dma_mapping_error (dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDR to the pci side dma address as well,
-   else DMA_ADDR is undefined.  */
-extern void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr);
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must be
-   the same as what as passed into pci_alloc_consistent.  References to
-   the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past
-   this call are illegal.  */
-extern void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
-		     dma_addr_t dma_addr);
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap (struct pci_dev *dev, void __iomem *addr);
-
-#endif /* __V850_PCI_H__ */
diff --git a/include/asm-v850/percpu.h b/include/asm-v850/percpu.h
deleted file mode 100644
index 755ac6522b63..000000000000
--- a/include/asm-v850/percpu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __V850_PERCPU_H__
-#define __V850_PERCPU_H__
-
-#include <asm-generic/percpu.h>
-
-/* This is a stupid hack to satisfy some grotty implicit include-file
-   dependency; basically, <linux/smp.h> uses BUG_ON, which calls BUG, but
-   doesn't include the necessary headers to define it.  In the twisted
-   festering mess of includes this must all be resolved somehow on other
-   platforms, but I haven't the faintest idea how, and don't care; here will
-   do, even though doesn't actually make any sense.  */
-#include <asm/page.h>
-
-#endif /* __V850_PERCPU_H__ */
diff --git a/include/asm-v850/pgalloc.h b/include/asm-v850/pgalloc.h
deleted file mode 100644
index b91eb2d02bfd..000000000000
--- a/include/asm-v850/pgalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-v850/pgalloc.h
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PGALLOC_H__
-#define __V850_PGALLOC_H__
-
-#include <linux/mm.h>  /* some crap code expects this */
-
-/* ... and then, there was one.  */
-#define check_pgt_cache()	((void)0)
-
-#endif /* __V850_PGALLOC_H__ */
diff --git a/include/asm-v850/pgtable.h b/include/asm-v850/pgtable.h
deleted file mode 100644
index 1ea2a900f0f8..000000000000
--- a/include/asm-v850/pgtable.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __V850_PGTABLE_H__
-#define __V850_PGTABLE_H__
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/page.h>
-
-
-#define pgd_present(pgd)	(1) /* pages are always present on NO_MM */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)		((void)0)
-
-#define	pmd_offset(a, b)	((void *)0)
-
-#define kern_addr_valid(addr)	(1)
-
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-static inline int pte_file (pte_t pte) { return 0; }
-
-
-/* These mean nothing to !CONFIG_MMU.  */
-#define PAGE_NONE		__pgprot(0)
-#define PAGE_SHARED		__pgprot(0)
-#define PAGE_COPY		__pgprot(0)
-#define PAGE_READONLY		__pgprot(0)
-#define PAGE_KERNEL		__pgprot(0)
-
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc.  When CONFIG_MMU is not defined, this
- * should never actually be used, so just define it to something that's
- * will hopefully cause a bus error if it is.
- */
-#define ZERO_PAGE(vaddr)	((void *)0x87654321)
-
-
-/* Some bogus code in procfs uses these; whatever.  */
-#define VMALLOC_START	0
-#define VMALLOC_END	(~0)
-
-
-extern void paging_init (void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define pgtable_cache_init()   ((void)0)
-
-
-extern unsigned int kobjsize(const void *objp);
-
-
-#endif /* __V850_PGTABLE_H__ */
diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h
deleted file mode 100644
index 803cad0b9b59..000000000000
--- a/include/asm-v850/poll.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __V850_POLL_H__
-#define __V850_POLL_H__
-
-#define POLLWRNORM	POLLOUT
-#define POLLWRBAND	0x0100
-
-#include <asm-generic/poll.h>
-
-#endif /* __V850_POLL_H__ */
diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h
deleted file mode 100644
index 7f403b765390..000000000000
--- a/include/asm-v850/posix_types.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-v850/posix_types.h -- Kernel versions of standard types
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_POSIX_TYPES_H__
-#define __V850_POSIX_TYPES_H__
-
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned long long __kernel_ino64_t;
-typedef unsigned int	__kernel_mode_t;
-typedef unsigned int	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef long long	__kernel_loff_t;
-typedef int		__kernel_pid_t;
-typedef unsigned short	__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-/* Some bogus code depends on this; we don't care.  */
-typedef __kernel_uid_t __kernel_old_uid_t;
-typedef unsigned int	__kernel_old_dev_t;
-
-typedef struct {
-	int	val[2];
-} __kernel_fsid_t;
-
-
-#if defined(__KERNEL__)
-
-/* We used to include <asm/bitops.h> here, which seems the right thing, but
-   it caused nasty include-file definition order problems.  Removing the
-   include seems to work, so fingers crossed...  */
-
-#undef	__FD_SET
-#define __FD_SET(fd, fd_set) \
-  __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef __FD_CLR
-#define __FD_CLR(fd, fd_set) \
-  __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef	__FD_ISSET
-#define __FD_ISSET(fd, fd_set) \
-  __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef	__FD_ZERO
-#define __FD_ZERO(fd_set) \
-  memset (fd_set, 0, sizeof (*(fd_set *)fd_set))
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* __V850_POSIX_TYPES_H__ */
diff --git a/include/asm-v850/processor.h b/include/asm-v850/processor.h
deleted file mode 100644
index 979e3467f9af..000000000000
--- a/include/asm-v850/processor.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * include/asm-v850/processor.h
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PROCESSOR_H__
-#define __V850_PROCESSOR_H__
-
-#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
-#include <linux/thread_info.h>
-#endif
-
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-
-/* Some code expects `segment' stuff to be defined here.  */
-#include <asm/segment.h>
-
-
-/*
- * The only places this is used seem to be horrible bletcherous kludges,
- * so we just define it to be as large as possible.
- */
-#define TASK_SIZE	(0xFFFFFFFF)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's.  We won't be using it.
- */
-#define TASK_UNMAPPED_BASE	0
-
-
-#ifndef __ASSEMBLY__
-
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr()	({ __label__ _l; _l: &&_l;})
-
-/* If you change this, you must change the associated assembly-languages
-   constants defined below, THREAD_*.  */
-struct thread_struct {
-	/* kernel stack pointer (must be first field in structure) */
-	unsigned long  ksp;
-};
-
-#define INIT_THREAD { sizeof init_stack + (unsigned long)init_stack }
-
-
-/* Do necessary setup to start up a newly executed thread.  */
-static inline void start_thread (struct pt_regs *regs,
-				 unsigned long pc, unsigned long usp)
-{
-	regs->pc = pc;
-	regs->gpr[GPR_SP] = usp;
-	regs->kernel_mode = 0;
-}
-
-/* Free all resources held by a thread. */
-static inline void release_thread (struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread (int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Free current thread data structures etc.  */
-static inline void exit_thread (void)
-{
-}
-
-
-/* Return the registers saved during context-switch by the currently
-   not-running thread T.  Note that this only includes some registers!
-   See entry.S for details.  */
-#define thread_saved_regs(t) \
-   ((struct pt_regs*)((t)->thread.ksp + STATE_SAVE_PT_OFFSET))
-/* Return saved (kernel) PC of a blocked thread.  Actually, we return the
-   LP register, because the thread is actually blocked in switch_thread,
-   and we're interested in the PC it will _return_ to.  */
-#define thread_saved_pc(t)   (thread_saved_regs(t)->gpr[GPR_LP])
-
-
-unsigned long get_wchan (struct task_struct *p);
-
-
-/* Return some info about the user process TASK.  */
-#define task_tos(task)	((unsigned long)task_stack_page(task) + THREAD_SIZE)
-#define task_pt_regs(task) ((struct pt_regs *)task_tos (task) - 1)
-#define task_sp(task)	(task_pt_regs (task)->gpr[GPR_SP])
-#define task_pc(task)	(task_pt_regs (task)->pc)
-/* Grotty old names for some.  */
-#define KSTK_EIP(task)	task_pc (task)
-#define KSTK_ESP(task)	task_sp (task)
-
-
-#define cpu_relax()    barrier()
-
-
-#else /* __ASSEMBLY__ */
-
-#define THREAD_KSP	0
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_PROCESSOR_H__ */
diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h
deleted file mode 100644
index 4f35cf2cd641..000000000000
--- a/include/asm-v850/ptrace.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/ptrace.h -- Access to CPU registers
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PTRACE_H__
-#define __V850_PTRACE_H__
-
-
-/* v850 general purpose registers with special meanings.  */
-#define GPR_ZERO	0	/* constant zero */
-#define GPR_ASM		1	/* reserved for assembler */
-#define GPR_SP		3	/* stack pointer */
-#define GPR_GP		4	/* global data pointer */
-#define GPR_TP		5	/* `text pointer' */
-#define GPR_EP		30	/* `element pointer' */
-#define GPR_LP		31	/* link pointer (current return address) */
-
-/* These aren't official names, but they make some code more descriptive.  */
-#define GPR_ARG0	6
-#define GPR_ARG1	7
-#define GPR_ARG2	8
-#define GPR_ARG3	9
-#define GPR_RVAL0	10
-#define GPR_RVAL1	11
-#define GPR_RVAL	GPR_RVAL0
-
-#define NUM_GPRS	32
-
-/* v850 `system' registers.  */
-#define SR_EIPC		0
-#define SR_EIPSW	1
-#define SR_FEPC		2
-#define SR_FEPSW	3
-#define SR_ECR		4
-#define SR_PSW		5
-#define SR_CTPC		16
-#define SR_CTPSW	17
-#define SR_DBPC		18
-#define SR_DBPSW	19
-#define SR_CTBP		20
-#define SR_DIR		21
-#define SR_ASID		23
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long v850_reg_t;
-
-/* How processor state is stored on the stack during a syscall/signal.
-   If you change this structure, change the associated assembly-language
-   macros below too (PT_*)!  */
-struct pt_regs
-{
-	/* General purpose registers.  */
-	v850_reg_t gpr[NUM_GPRS];
-
-	v850_reg_t pc;		/* program counter */
-	v850_reg_t psw;		/* program status word */
-
-	/* Registers used by `callt' instruction:  */
-	v850_reg_t ctpc;	/* saved program counter */
-	v850_reg_t ctpsw;	/* saved psw */
-	v850_reg_t ctbp;	/* base pointer for callt table */
-
-	char kernel_mode;	/* 1 if in `kernel mode', 0 if user mode */
-};
-
-
-#define instruction_pointer(regs)	((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-#define user_mode(regs)			(!(regs)->kernel_mode)
-
-/* When a struct pt_regs is used to save user state for a system call in
-   the kernel, the system call is stored in the space for R0 (since it's
-   never used otherwise, R0 being a constant 0).  Non-system-calls
-   simply store 0 there.  */
-#define PT_REGS_SYSCALL(regs)		(regs)->gpr[0]
-#define PT_REGS_SET_SYSCALL(regs, val)	((regs)->gpr[0] = (val))
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* The number of bytes used to store each register.  */
-#define _PT_REG_SIZE	4
-
-/* Offset of a general purpose register in a struct pt_regs.  */
-#define PT_GPR(num)	((num) * _PT_REG_SIZE)
-
-/* Offsets of various special registers & fields in a struct pt_regs.  */
-#define PT_PC		((NUM_GPRS + 0) * _PT_REG_SIZE)
-#define PT_PSW		((NUM_GPRS + 1) * _PT_REG_SIZE)
-#define PT_CTPC		((NUM_GPRS + 2) * _PT_REG_SIZE)
-#define PT_CTPSW	((NUM_GPRS + 3) * _PT_REG_SIZE)
-#define PT_CTBP		((NUM_GPRS + 4) * _PT_REG_SIZE)
-#define PT_KERNEL_MODE	((NUM_GPRS + 5) * _PT_REG_SIZE)
-
-/* Where the current syscall number is stashed; obviously only valid in
-   the kernel!  */
-#define PT_CUR_SYSCALL	PT_GPR(0)
-
-/* Size of struct pt_regs, including alignment.  */
-#define PT_SIZE		((NUM_GPRS + 6) * _PT_REG_SIZE)
-
-
-/* These are `magic' values for PTRACE_PEEKUSR that return info about where
-   a process is located in memory.  */
-#define PT_TEXT_ADDR	(PT_SIZE + 1)
-#define PT_TEXT_LEN	(PT_SIZE + 2)
-#define PT_DATA_ADDR	(PT_SIZE + 3)
-
-
-#endif /* __V850_PTRACE_H__ */
diff --git a/include/asm-v850/resource.h b/include/asm-v850/resource.h
deleted file mode 100644
index 4b9dcd44f8d1..000000000000
--- a/include/asm-v850/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_RESOURCE_H__
-#define __V850_RESOURCE_H__
-
-#include <asm-generic/resource.h>
-
-#endif /* __V850_RESOURCE_H__ */
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
deleted file mode 100644
index db9879f00aa7..000000000000
--- a/include/asm-v850/rte_cb.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_CB_H__
-#define __V850_RTE_CB_H__
-
-
-/* The SRAM on the Mother-A motherboard.  */
-#define MB_A_SRAM_ADDR		GCS0_ADDR
-#define MB_A_SRAM_SIZE		0x00200000 /* 2MB */
-
-
-#ifdef CONFIG_RTE_GBUS_INT
-/* GBUS interrupt support.  */
-
-# include <asm/gbus_int.h>
-
-# define GBUS_INT_BASE_IRQ	NUM_RTE_CB_IRQS
-# define GBUS_INT_BASE_ADDR	(GCS2_ADDR + 0x00006000)
-
-/* Some specific interrupts.  */
-# define IRQ_MB_A_LAN		IRQ_GBUS_INT(10)
-# define IRQ_MB_A_PCI1(n)	(IRQ_GBUS_INT(16) + (n))
-# define IRQ_MB_A_PCI1_NUM	4
-# define IRQ_MB_A_PCI2(n)	(IRQ_GBUS_INT(20) + (n))
-# define IRQ_MB_A_PCI2_NUM	4
-# define IRQ_MB_A_EXT(n)	(IRQ_GBUS_INT(24) + (n))
-# define IRQ_MB_A_EXT_NUM	4
-# define IRQ_MB_A_USB_OC(n)	(IRQ_GBUS_INT(28) + (n))
-# define IRQ_MB_A_USB_OC_NUM	2
-# define IRQ_MB_A_PCMCIA_OC	IRQ_GBUS_INT(30)
-
-/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS.  */
-# define NUM_MACH_IRQS		(NUM_RTE_CB_IRQS + IRQ_GBUS_INT_NUM)
-
-#else /* !CONFIG_RTE_GBUS_INT */
-
-# define NUM_MACH_IRQS		NUM_RTE_CB_IRQS
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-#ifdef CONFIG_RTE_MB_A_PCI
-/* Mother-A PCI bus support.  */
-
-# include <asm/rte_mb_a_pci.h>
-
-/* These are the base addresses used for allocating device address
-   space.  512K of the motherboard SRAM is in the same space, so we have
-   to be careful not to let it be allocated.  */
-# define PCIBIOS_MIN_MEM	(MB_A_PCI_MEM_ADDR + 0x80000)
-# define PCIBIOS_MIN_IO		MB_A_PCI_IO_ADDR
-
-/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
-   instead, perversely enough, this becomes always true! */
-# define pci_dma_supported(dev, mask)		1
-# define pcibios_assign_all_busses()		1
-
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-
-#ifndef __ASSEMBLY__
-extern void rte_cb_early_init (void);
-extern void rte_cb_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_RTE_CB_H__ */
diff --git a/include/asm-v850/rte_ma1_cb.h b/include/asm-v850/rte_ma1_cb.h
deleted file mode 100644
index bd3162ab9844..000000000000
--- a/include/asm-v850/rte_ma1_cb.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * include/asm-v850/rte_ma1_cb.h -- Midas labs RTE-V850/MA1-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_MA1_CB_H__
-#define __V850_RTE_MA1_CB_H__
-
-#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
-
-
-#define PLATFORM		"rte-v850e/ma1-cb"
-#define PLATFORM_LONG		"Midas lab RTE-V850E/MA1-CB"
-
-#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
-
-/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
-   for its own purposes, so care must be taken.  Some address lines are
-   not decoded, so the SRAM area is mirrored every 1MB from 0x400000 to
-   0x800000 (exclusive).  */
-#define SRAM_ADDR		0x00400000
-#define SRAM_SIZE		0x00100000 /* 1MB */
-
-/* 32MB of onbard SDRAM.  */
-#define SDRAM_ADDR		0x00800000
-#define SDRAM_SIZE		0x02000000 /* 32MB */
-
-
-/* CPU addresses of GBUS memory spaces.  */
-#define GCS0_ADDR		0x05000000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE		0x00200000 /*   2MB */
-#define GCS1_ADDR		0x06000000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE		0x00800000 /*   8MB */
-#define GCS2_ADDR		0x07900000 /* GCS2 - I/O registers */
-#define GCS2_SIZE		0x00400000 /*   4MB */
-#define GCS5_ADDR		0x04000000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE		0x01000000 /*   16MB */
-#define GCS6_ADDR		0x07980000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE		0x00000200 /*   512B */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 		SRAM_ADDR
-
-
-/* The GBUS GINT0 - GINT3 interrupts are connected to the INTP000 - INTP011
-   pins on the CPU.  These are shared among the GBUS interrupts.  */
-#define IRQ_GINT(n)		IRQ_INTP(n)
-#define IRQ_GINT_NUM		4
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
-#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0.  */
-
-#define INTV_BASE		0
-
-#else /* !CONFIG_ROM_KERNEL */
-
-#ifdef CONFIG_RTE_CB_MULTI
-/* Using RAM kernel with ROM monitor for Multi debugger.  */
-
-/* The chip's real interrupt vectors are in ROM, but they jump to a
-   secondary interrupt vector table in RAM.  */
-#define INTV_BASE		0x004F8000
-
-/* Scratch memory used by the ROM monitor, which shouldn't be used by
-   linux (except for the alternate interrupt vector area, defined
-   above).  */
-#define MON_SCRATCH_ADDR	0x004F8000
-#define MON_SCRATCH_SIZE	0x00008000 /* 32KB */
-
-#else /* !CONFIG_RTE_CB_MULTI */
-/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
-   address 0.  */
-
-#define INTV_BASE		0
-
-#endif /* CONFIG_RTE_CB_MULTI */
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices.  */
-
-/* Seven-segment LED display (two digits).  Write-only.  */
-#define LED_ADDR(n)		(0x07802000 + (n))
-#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS		2
-
-
-/* Override the basic MA uart pre-initialization so that we can
-   initialize extra stuff.  */
-#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/ma.h> */
-#define V850E_UART_PRE_CONFIGURE	rte_ma1_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_ma1_cb_uart_pre_configure (unsigned chan,
-					   unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
-
-/* CTS for UART channel 0 is pin P43 (bit 3 of port 4).  */
-#define V850E_UART_CTS(chan)	((chan) == 0 ? !(MA_PORT4_IO & 0x8) : 1)
-/* RTS for UART channel 0 is pin P42 (bit 2 of port 4).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 0) {						      \
-		   unsigned old = MA_PORT4_IO; 				      \
-		   if (val)						      \
-			   MA_PORT4_IO = old & ~0x4;			      \
-		   else							      \
-			   MA_PORT4_IO = old | 0x4;			      \
-	   }								      \
-   } while (0)
-
-
-#endif /* __V850_RTE_MA1_CB_H__ */
diff --git a/include/asm-v850/rte_mb_a_pci.h b/include/asm-v850/rte_mb_a_pci.h
deleted file mode 100644
index 41ac185ca9cd..000000000000
--- a/include/asm-v850/rte_mb_a_pci.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-v850/mb_a_pci.h -- PCI support for Midas lab RTE-MOTHER-A board
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MB_A_PCI_H__
-#define __V850_MB_A_PCI_H__
-
-
-#define MB_A_PCI_MEM_ADDR	GCS5_ADDR
-#define MB_A_PCI_MEM_SIZE	(GCS5_SIZE / 2)
-#define MB_A_PCI_IO_ADDR	(GCS5_ADDR + MB_A_PCI_MEM_SIZE)
-#define MB_A_PCI_IO_SIZE	(GCS5_SIZE / 2)
-#define MB_A_PCI_REG_BASE_ADDR	GCS6_ADDR
-
-#define MB_A_PCI_PCICR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x4)
-#define MB_A_PCI_PCICR		(*(volatile u16 *)MB_A_PCI_PCICR_ADDR)
-#define MB_A_PCI_PCISR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x6)
-#define MB_A_PCI_PCISR		(*(volatile u16 *)MB_A_PCI_PCISR_ADDR)
-#define MB_A_PCI_PCILTR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xD)
-#define MB_A_PCI_PCILTR		(*(volatile u8 *)MB_A_PCI_PCILTR_ADDR)
-#define MB_A_PCI_PCIBAR0_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x10)
-#define MB_A_PCI_PCIBAR0	(*(volatile u32 *)MB_A_PCI_PCIBAR0_ADDR)
-#define MB_A_PCI_PCIBAR1_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x14)
-#define MB_A_PCI_PCIBAR1	(*(volatile u32 *)MB_A_PCI_PCIBAR1_ADDR)
-#define MB_A_PCI_PCIBAR2_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x18)
-#define MB_A_PCI_PCIBAR2	(*(volatile u32 *)MB_A_PCI_PCIBAR2_ADDR)
-#define MB_A_PCI_VENDOR_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2C)
-#define MB_A_PCI_VENDOR_ID	(*(volatile u16 *)MB_A_PCI_VENDOR_ID_ADDR)
-#define MB_A_PCI_DEVICE_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2E)
-#define MB_A_PCI_DEVICE_ID	(*(volatile u16 *)MB_A_PCI_DEVICE_ID_ADDR)
-#define MB_A_PCI_DMRR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x9C)
-#define MB_A_PCI_DMRR		(*(volatile u32 *)MB_A_PCI_DMRR_ADDR)
-#define MB_A_PCI_DMLBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA0)
-#define MB_A_PCI_DMLBAM		(*(volatile u32 *)MB_A_PCI_DMLBAM_ADDR)
-#define MB_A_PCI_DMLBAI_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA4)
-#define MB_A_PCI_DMLBAI		(*(volatile u32 *)MB_A_PCI_DMLBAI_ADDR)
-#define MB_A_PCI_PCIPBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA8)
-#define MB_A_PCI_PCIPBAM	(*(volatile u32 *)MB_A_PCI_PCIPBAM_ADDR)
-/* `PCI Configuration Address Register for Direct Master to PCI IO/CFG'  */
-#define MB_A_PCI_DMCFGA_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xAC)
-#define MB_A_PCI_DMCFGA		(*(volatile u32 *)MB_A_PCI_DMCFGA_ADDR)
-/* `PCI Permanent Configuration ID Register'  */
-#define MB_A_PCI_PCIHIDR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xF0)
-#define MB_A_PCI_PCIHIDR	(*(volatile u32 *)MB_A_PCI_PCIHIDR_ADDR)
-
-
-#endif /* __V850_MB_A_PCI_H__ */
diff --git a/include/asm-v850/rte_me2_cb.h b/include/asm-v850/rte_me2_cb.h
deleted file mode 100644
index 9922c85c85a8..000000000000
--- a/include/asm-v850/rte_me2_cb.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_ME2_CB_H__
-#define __V850_RTE_ME2_CB_H__
-
-#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
-
-
-#define PLATFORM		"rte-v850e/me2-cb"
-#define PLATFORM_LONG		"Midas lab RTE-V850E/ME2-CB"
-
-#define CPU_CLOCK_FREQ		150000000 /* 150MHz */
-#define FIXED_BOGOMIPS		50
-
-/* 32MB of onbard SDRAM.  */
-#define SDRAM_ADDR		0x00800000
-#define SDRAM_SIZE		0x02000000 /* 32MB */
-
-
-/* CPU addresses of GBUS memory spaces.  */
-#define GCS0_ADDR		0x04000000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE		0x00800000 /*   8MB */
-#define GCS1_ADDR		0x04800000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE		0x00800000 /*   8MB */
-#define GCS2_ADDR		0x07000000 /* GCS2 - I/O registers */
-#define GCS2_SIZE		0x00800000 /*   8MB */
-#define GCS5_ADDR		0x08000000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE		0x02000000 /*   32MB */
-#define GCS6_ADDR		0x07800000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE		0x00800000 /*   8MB */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 		SDRAM_ADDR
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0.  */
-
-#define INTV_BASE		0
-#define ROOT_FS_IMAGE_RW	0
-
-#else /* !CONFIG_ROM_KERNEL */
-/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
-   address 0.  */
-
-#define INTV_BASE		0
-#define ROOT_FS_IMAGE_RW	1
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices.  */
-
-/* Seven-segment LED display (four digits).  */
-#define LED_ADDR(n)		(0x0FE02000 + (n))
-#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS		4
-
-
-/* On-board PIC.  */
-
-#define CB_PIC_BASE_ADDR 	0x0FE04000
-
-#define CB_PIC_INT0M_ADDR 	(CB_PIC_BASE_ADDR + 0x00)
-#define CB_PIC_INT0M      	(*(volatile u16 *)CB_PIC_INT0M_ADDR)
-#define CB_PIC_INT1M_ADDR 	(CB_PIC_BASE_ADDR + 0x10)
-#define CB_PIC_INT1M      	(*(volatile u16 *)CB_PIC_INT1M_ADDR)
-#define CB_PIC_INTR_ADDR  	(CB_PIC_BASE_ADDR + 0x20)
-#define CB_PIC_INTR       	(*(volatile u16 *)CB_PIC_INTR_ADDR)
-#define CB_PIC_INTEN_ADDR 	(CB_PIC_BASE_ADDR + 0x30)
-#define CB_PIC_INTEN      	(*(volatile u16 *)CB_PIC_INTEN_ADDR)
-
-#define CB_PIC_INT0EN        	0x0001
-#define CB_PIC_INT1EN        	0x0002
-#define CB_PIC_INT0SEL       	0x0080
-
-/* The PIC interrupts themselves.  */
-#define CB_PIC_BASE_IRQ		NUM_CPU_IRQS
-#define IRQ_CB_PIC_NUM		10
-
-/* Some specific CB_PIC interrupts. */
-#define IRQ_CB_EXTTM0		(CB_PIC_BASE_IRQ + 0)
-#define IRQ_CB_EXTSIO		(CB_PIC_BASE_IRQ + 1)
-#define IRQ_CB_TOVER		(CB_PIC_BASE_IRQ + 2)
-#define IRQ_CB_GINT0		(CB_PIC_BASE_IRQ + 3)
-#define IRQ_CB_USB		(CB_PIC_BASE_IRQ + 4)
-#define IRQ_CB_LANC		(CB_PIC_BASE_IRQ + 5)
-#define IRQ_CB_USB_VBUS_ON	(CB_PIC_BASE_IRQ + 6)
-#define IRQ_CB_USB_VBUS_OFF	(CB_PIC_BASE_IRQ + 7)
-#define IRQ_CB_EXTTM1		(CB_PIC_BASE_IRQ + 8)
-#define IRQ_CB_EXTTM2		(CB_PIC_BASE_IRQ + 9)
-
-/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to
-   the INTP65 - INTP67 pins on the CPU.  These are shared among the GBUS
-   interrupts.  */
-#define IRQ_GINT(n)		IRQ_INTP((n) + 9)  /* 0 is unused! */
-#define IRQ_GINT_NUM		4		   /* 0 is unused! */
-
-/* The shared interrupt line from the PIC is connected to CPU pin INTP23.  */
-#define IRQ_CB_PIC		IRQ_INTP(4) /* P23 */
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
-#define NUM_RTE_CB_IRQS		(NUM_CPU_IRQS + IRQ_CB_PIC_NUM)
-
-
-#ifndef __ASSEMBLY__
-struct cb_pic_irq_init {
-	const char *name;	/* name of interrupt type */
-
-	/* Range of kernel irq numbers for this type:
-	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
-	unsigned base, num, interval;
-
-	unsigned priority;	/* interrupt priority to assign */
-};
-struct hw_interrupt_type;	/* fwd decl */
-
-/* Enable interrupt handling for interrupt IRQ.  */
-extern void cb_pic_enable_irq (unsigned irq);
-/* Disable interrupt handling for interrupt IRQ.  Note that any interrupts
-   received while disabled will be delivered once the interrupt is enabled
-   again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'.  */
-extern void cb_pic_disable_irq (unsigned irq);
-/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is
-   terminated by an entry with the name field == 0).  */
-extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
-				   struct hw_interrupt_type *hw_irq_types);
-/* Initialize PIC interrupts.  */
-extern void cb_pic_init_irqs (void);
-#endif /* __ASSEMBLY__ */
-
-
-/* TL16C550C on board UART see also asm/serial.h */
-#define CB_UART_BASE    	0x0FE08000
-#define CB_UART_REG_GAP 	0x10
-#define CB_UART_CLOCK   	0x16000000
-
-/* CompactFlash setting */
-#define CB_CF_BASE     		0x0FE0C000
-#define CB_CF_CCR_ADDR 		(CB_CF_BASE+0x200)
-#define CB_CF_CCR      		(*(volatile u8 *)CB_CF_CCR_ADDR)
-#define CB_CF_REG0_ADDR		(CB_CF_BASE+0x1000)
-#define CB_CF_REG0     		(*(volatile u16 *)CB_CF_REG0_ADDR)
-#define CB_CF_STS0_ADDR		(CB_CF_BASE+0x1004)
-#define CB_CF_STS0     		(*(volatile u16 *)CB_CF_STS0_ADDR)
-#define CB_PCATA_BASE  		(CB_CF_BASE+0x800)
-#define CB_IDE_BASE    		(CB_CF_BASE+0x9F0)
-#define CB_IDE_CTRL    		(CB_CF_BASE+0xBF6)
-#define CB_IDE_REG_OFFS		0x1
-
-
-/* SMSC LAN91C111 setting */
-#if defined(CONFIG_SMC91111)
-#define CB_LANC_BASE 		0x0FE10300
-#define CONFIG_SMC16BITONLY
-#define ETH0_ADDR 		CB_LANC_BASE
-#define ETH0_IRQ 		IRQ_CB_LANC
-#endif /* CONFIG_SMC16BITONLY */
-
-
-#undef V850E_UART_PRE_CONFIGURE
-#define V850E_UART_PRE_CONFIGURE	rte_me2_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_uart_pre_configure (unsigned chan,
-					   unsigned cflags, unsigned baud);
-#endif /* __ASSEMBLY__ */
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
-
-/* CTS for UART channel 0 is pin P22 (bit 2 of port 2).  */
-#define V850E_UART_CTS(chan)	((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1)
-/* RTS for UART channel 0 is pin P21 (bit 1 of port 2).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 0) {						      \
-		   unsigned old = ME2_PORT2_IO; 			      \
-		   if (val)						      \
-			   ME2_PORT2_IO = old & ~0x2;			      \
-		   else							      \
-			   ME2_PORT2_IO = old | 0x2;			      \
-	   }								      \
-   } while (0)
-
-
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_RTE_ME2_CB_H__ */
diff --git a/include/asm-v850/rte_nb85e_cb.h b/include/asm-v850/rte_nb85e_cb.h
deleted file mode 100644
index f56591cad90a..000000000000
--- a/include/asm-v850/rte_nb85e_cb.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * include/asm-v850/rte_nb85e_cb.h -- Midas labs RTE-V850/NB85E-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_NB85E_CB_H__
-#define __V850_RTE_NB85E_CB_H__
-
-#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
-
-
-#define PLATFORM		"rte-v850e/nb85e-cb"
-#define PLATFORM_LONG		"Midas lab RTE-V850E/NB85E-CB"
-
-#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
-
-/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
-   for its own purposes, so care must be taken.  */
-#define SRAM_ADDR		0x03C00000
-#define SRAM_SIZE		0x00100000 /* 1MB */
-
-/* 16MB of onbard SDRAM.  */
-#define SDRAM_ADDR		0x01000000
-#define SDRAM_SIZE		0x01000000 /* 16MB */
-
-
-/* CPU addresses of GBUS memory spaces.  */
-#define GCS0_ADDR		0x00400000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE		0x00400000 /*   4MB */
-#define GCS1_ADDR		0x02000000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE		0x00800000 /*   8MB */
-#define GCS2_ADDR		0x03900000 /* GCS2 - I/O registers */
-#define GCS2_SIZE		0x00080000 /*   512KB */
-#define GCS3_ADDR		0x02800000 /* GCS3 - EXT-bus: memory space */
-#define GCS3_SIZE		0x00800000 /*   8MB */
-#define GCS4_ADDR		0x03A00000 /* GCS4 - EXT-bus: I/O space */
-#define GCS4_SIZE		0x00200000 /*   2MB */
-#define GCS5_ADDR		0x00800000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE		0x00800000 /*   8MB */
-#define GCS6_ADDR		0x03980000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE		0x00010000 /*   64KB */
-
-
-/* The GBUS GINT0 - GINT3 interrupts are connected to CPU interrupts 10-12.
-   These are shared among the GBUS interrupts.  */
-#define IRQ_GINT(n)		(10 + (n))
-#define IRQ_GINT_NUM		3
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
-#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0.  */
-
-#define INTV_BASE	0
-
-#else /* !CONFIG_ROM_KERNEL */
-/* We're using the ROM monitor.  */
-
-/* The chip's real interrupt vectors are in ROM, but they jump to a
-   secondary interrupt vector table in RAM.  */
-#define INTV_BASE		0x03CF8000
-
-/* Scratch memory used by the ROM monitor, which shouldn't be used by
-   linux (except for the alternate interrupt vector area, defined
-   above).  */
-#define MON_SCRATCH_ADDR	0x03CE8000
-#define MON_SCRATCH_SIZE	0x00018000 /* 96KB */
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices.  */
-
-/* Seven-segment LED display (two digits).  Write-only.  */
-#define LED_ADDR(n)	(0x03802000 + (n))
-#define LED(n)		(*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS	4
-
-
-/* Override the basic TEG UART pre-initialization so that we can
-   initialize extra stuff.  */
-#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/teg.h> */
-#define V850E_UART_PRE_CONFIGURE	rte_nb85e_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_nb85e_cb_uart_pre_configure (unsigned chan,
-					     unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART. */
-
-/* CTS is pin P00.  */
-#define V850E_UART_CTS(chan)	(! (TEG_PORT0_IO & 0x1))
-/* RTS is pin P02.  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   unsigned old = TEG_PORT0_IO;					      \
-	   TEG_PORT0_IO = val ? (old & ~0x4) : (old | 0x4);		      \
-   } while (0)
-
-
-#endif /* __V850_RTE_NB85E_CB_H__ */
diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
deleted file mode 100644
index 02d27b3fb061..000000000000
--- a/include/asm-v850/scatterlist.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-v850/scatterlist.h
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SCATTERLIST_H__
-#define __V850_SCATTERLIST_H__
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned	offset;
-	dma_addr_t	dma_address;
-	unsigned	length;
-};
-
-#define ISA_DMA_THRESHOLD	(~0UL)
-
-#endif /* __V850_SCATTERLIST_H__ */
diff --git a/include/asm-v850/sections.h b/include/asm-v850/sections.h
deleted file mode 100644
index e0238253a0d0..000000000000
--- a/include/asm-v850/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SECTIONS_H__
-#define __V850_SECTIONS_H__
-
-#include <asm-generic/sections.h>
-
-#endif /* __V850_SECTIONS_H__ */
diff --git a/include/asm-v850/segment.h b/include/asm-v850/segment.h
deleted file mode 100644
index 5e2b15dcf3d9..000000000000
--- a/include/asm-v850/segment.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __V850_SEGMENT_H__
-#define __V850_SEGMENT_H__
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t;	/* domain register */
-
-#endif /* !__ASSEMBLY__ */
-
-
-#define __KERNEL_CS	0x0
-#define __KERNEL_DS	0x0
-
-#define __USER_CS	0x1
-#define __USER_DS	0x1
-
-#define KERNEL_DS	__KERNEL_DS
-#define KERNEL_CS	__KERNEL_CS
-#define USER_DS		__USER_DS
-#define USER_CS		__USER_CS
-
-#define segment_eq(a,b)	((a) == (b))
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(USER_DS)
-
-#define set_fs(seg)	((void)(seg))
-
-
-#define copy_segments(task, mm)	((void)((void)(task), (mm)))
-#define release_segments(mm)	((void)(mm))
-#define forget_segments()	((void)0)
-
-
-#endif /* __V850_SEGMENT_H__ */
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-v850/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-v850/sembuf.h b/include/asm-v850/sembuf.h
deleted file mode 100644
index 1622231a8b85..000000000000
--- a/include/asm-v850/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __V850_SEMBUF_H__
-#define __V850_SEMBUF_H__
-
-/* 
- * The semid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __V850_SEMBUF_H__ */
diff --git a/include/asm-v850/serial.h b/include/asm-v850/serial.h
deleted file mode 100644
index 36d8f4cbbf39..000000000000
--- a/include/asm-v850/serial.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */ 
-
-#ifdef CONFIG_RTE_CB_ME2
-
-#include <asm/rte_me2_cb.h>
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define irq_cannonicalize(x) (x)
-#define BASE_BAUD	250000	/* (16MHz / (16 * 38400)) * 9600 */
-#define SERIAL_PORT_DFNS \
-   { 0, BASE_BAUD, CB_UART_BASE, IRQ_CB_EXTSIO, STD_COM_FLAGS },
-
-/* Redefine UART register offsets.  */
-#undef UART_RX
-#undef UART_TX
-#undef UART_DLL
-#undef UART_TRG
-#undef UART_DLM
-#undef UART_IER
-#undef UART_FCTR
-#undef UART_IIR
-#undef UART_FCR
-#undef UART_EFR
-#undef UART_LCR
-#undef UART_MCR
-#undef UART_LSR
-#undef UART_MSR
-#undef UART_SCR
-#undef UART_EMSR
-
-#define UART_RX		(0 * CB_UART_REG_GAP)
-#define UART_TX		(0 * CB_UART_REG_GAP)
-#define UART_DLL	(0 * CB_UART_REG_GAP)
-#define UART_TRG	(0 * CB_UART_REG_GAP)
-#define UART_DLM	(1 * CB_UART_REG_GAP)
-#define UART_IER	(1 * CB_UART_REG_GAP)
-#define UART_FCTR	(1 * CB_UART_REG_GAP)
-#define UART_IIR	(2 * CB_UART_REG_GAP)
-#define UART_FCR	(2 * CB_UART_REG_GAP)
-#define UART_EFR	(2 * CB_UART_REG_GAP)
-#define UART_LCR	(3 * CB_UART_REG_GAP)
-#define UART_MCR	(4 * CB_UART_REG_GAP)
-#define UART_LSR	(5 * CB_UART_REG_GAP)
-#define UART_MSR	(6 * CB_UART_REG_GAP)
-#define UART_SCR	(7 * CB_UART_REG_GAP)
-#define UART_EMSR	(7 * CB_UART_REG_GAP)
-
-#endif /* CONFIG_RTE_CB_ME2 */
diff --git a/include/asm-v850/setup.h b/include/asm-v850/setup.h
deleted file mode 100644
index c48a9b97d05b..000000000000
--- a/include/asm-v850/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _V850_SETUP_H
-#define _V850_SETUP_H
-
-#define COMMAND_LINE_SIZE	512
-
-#endif /* __SETUP_H */
diff --git a/include/asm-v850/shmbuf.h b/include/asm-v850/shmbuf.h
deleted file mode 100644
index 3d085c9c418e..000000000000
--- a/include/asm-v850/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __V850_SHMBUF_H__
-#define __V850_SHMBUF_H__
-
-/* 
- * The shmid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __V850_SHMBUF_H__ */
diff --git a/include/asm-v850/shmparam.h b/include/asm-v850/shmparam.h
deleted file mode 100644
index 7dcb6739073e..000000000000
--- a/include/asm-v850/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SHMPARAM_H__
-#define __V850_SHMPARAM_H__
-
-#define	SHMLBA		PAGE_SIZE	/* attach addr a multiple of this */
-
-#endif /* __V850_SHMPARAM_H__ */
diff --git a/include/asm-v850/sigcontext.h b/include/asm-v850/sigcontext.h
deleted file mode 100644
index e0890f6f4bc9..000000000000
--- a/include/asm-v850/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/sigcontext.h -- Signal contexts
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIGCONTEXT_H__
-#define __V850_SIGCONTEXT_H__
-
-#include <asm/ptrace.h>
-
-struct sigcontext
-{
-	struct pt_regs 	regs;
-	unsigned long	oldmask;
-};
-
-#endif /* __V850_SIGCONTEXT_H__ */
diff --git a/include/asm-v850/siginfo.h b/include/asm-v850/siginfo.h
deleted file mode 100644
index 7eb94703dce0..000000000000
--- a/include/asm-v850/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SIGINFO_H__
-#define __V850_SIGINFO_H__
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __V850_SIGINFO_H__ */
diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h
deleted file mode 100644
index a38df0834bbf..000000000000
--- a/include/asm-v850/signal.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef __V850_SIGNAL_H__
-#define __V850_SIGNAL_H__
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-
-#ifdef __KERNEL__
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_SIGNAL_H__ */
diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h
deleted file mode 100644
index 026932d476cd..000000000000
--- a/include/asm-v850/sim.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/sim.h -- Machine-dependent defs for GDB v850e simulator
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM_H__
-#define __V850_SIM_H__
-
-
-#define CPU_ARCH		"v850e"
-#define CPU_MODEL		"v850e"
-#define CPU_MODEL_LONG		"NEC V850E"
-#define PLATFORM		"gdb/v850e"
-#define PLATFORM_LONG		"GDB V850E simulator"
-
-
-/* We use a weird value for RAM, not just 0, for testing purposes.
-   These must match the values used in the linker script.  */
-#define RAM_ADDR		0x8F000000
-#define RAM_SIZE		0x03000000
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 		RAM_ADDR
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  On real
-   processors, this usually is on-chip RAM, but here we just
-   choose an arbitrary address that meets the above constraint.  */
-#define R0_RAM_ADDR		0xFFFFF000
-
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		6
-
-
-#endif /* __V850_SIM_H__ */
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
deleted file mode 100644
index 8b4d6974066c..000000000000
--- a/include/asm-v850/sim85e2.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-v850/sim85e2.h -- Machine-dependent defs for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2_H__
-#define __V850_SIM85E2_H__
-
-
-#include <asm/v850e2.h>		/* Based on V850E2 core.  */
-
-
-/* Various memory areas supported by the simulator.
-   These should match the corresponding definitions in the linker script.  */
-
-/* `instruction RAM'; instruction fetches are much faster from IRAM than
-   from DRAM.  */
-#define IRAM_ADDR		0
-#define IRAM_SIZE		0x00100000 /* 1MB */
-/* `data RAM', below and contiguous with the I/O space.
-   Data fetches are much faster from DRAM than from IRAM.  */
-#define DRAM_ADDR		0xfff00000
-#define DRAM_SIZE		0x000ff000 /* 1020KB */
-/* `external ram'.  Unlike the above RAM areas, this memory is cached,
-   so both instruction and data fetches should be (mostly) fast --
-   however, currently only write-through caching is supported, so writes
-   to ERAM will be slow.  */
-#define ERAM_ADDR		0x00100000
-#define ERAM_SIZE		0x07f00000 /* 127MB (max) */
-/* Dynamic RAM; uses memory controller.  */
-#define SDRAM_ADDR		0x10000000
-#define SDRAM_SIZE		0x01000000 /* 16MB */
-
-
-/* Simulator specific control registers.  */
-/* NOTHAL controls whether the simulator will stop at a `halt' insn.  */
-#define SIM85E2_NOTHAL_ADDR	0xffffff22
-#define SIM85E2_NOTHAL		(*(volatile u8 *)SIM85E2_NOTHAL_ADDR)
-/* The simulator will stop N cycles after N is written to SIMFIN.  */
-#define SIM85E2_SIMFIN_ADDR	0xffffff24
-#define SIM85E2_SIMFIN		(*(volatile u16 *)SIM85E2_SIMFIN_ADDR)
-
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS		64
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET		SDRAM_ADDR
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be accessible
-   using a load instruction relative to R0.  The sim85e2 simulator
-   actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily
-   choose a small portion at the end of that.  */
-#define R0_RAM_ADDR		0xFFFFE000
-
-
-#endif /* __V850_SIM85E2_H__ */
diff --git a/include/asm-v850/sim85e2c.h b/include/asm-v850/sim85e2c.h
deleted file mode 100644
index eee543ff3af8..000000000000
--- a/include/asm-v850/sim85e2c.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/sim85e2c.h -- Machine-dependent defs for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002  NEC Corporation
- *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2C_H__
-#define __V850_SIM85E2C_H__
-
-/* Use generic sim85e2 settings, other than the various names.  */
-#include <asm/sim85e2.h>
-
-#define CPU_MODEL	"v850e2"
-#define CPU_MODEL_LONG	"NEC V850E2"
-#define PLATFORM	"sim85e2c"
-#define PLATFORM_LONG	"SIM85E2C V850E2 simulator"
-
-#endif /* __V850_SIM85E2C_H__ */
diff --git a/include/asm-v850/sim85e2s.h b/include/asm-v850/sim85e2s.h
deleted file mode 100644
index ee066d5d3c51..000000000000
--- a/include/asm-v850/sim85e2s.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-v850/sim85e2s.h -- Machine-dependent defs for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2S_H__
-#define __V850_SIM85E2S_H__
-
-#include <asm/sim85e2.h>	/* Use generic sim85e2 settings.  */
-#if 0
-#include <asm/v850e2_cache.h>	/* + cache */
-#endif
-
-#define CPU_MODEL	"v850e2"
-#define CPU_MODEL_LONG	"NEC V850E2"
-#define PLATFORM	"sim85e2s"
-#define PLATFORM_LONG	"SIM85E2S V850E2 simulator"
-
-#endif /* __V850_SIM85E2S_H__ */
diff --git a/include/asm-v850/simsyscall.h b/include/asm-v850/simsyscall.h
deleted file mode 100644
index 4a19d5ae9d17..000000000000
--- a/include/asm-v850/simsyscall.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * include/asm-v850/simsyscall.h -- `System calls' under the v850e emulator
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIMSYSCALL_H__
-#define __V850_SIMSYSCALL_H__
-
-#define V850_SIM_SYS_exit(a...)		V850_SIM_SYSCALL_1 (1	, ##a)
-#define V850_SIM_SYS_fork(a...)		V850_SIM_SYSCALL_0 (2	, ##a)
-#define V850_SIM_SYS_read(a...)		V850_SIM_SYSCALL_3 (3	, ##a)
-#define V850_SIM_SYS_write(a...)	V850_SIM_SYSCALL_3 (4	, ##a)
-#define V850_SIM_SYS_open(a...)		V850_SIM_SYSCALL_2 (5	, ##a)
-#define V850_SIM_SYS_close(a...)	V850_SIM_SYSCALL_1 (6	, ##a)
-#define V850_SIM_SYS_wait4(a...)	V850_SIM_SYSCALL_4 (7	, ##a)
-/* #define V850_SIM_SYS_creat(a...)	V850_SIM_SYSCALL_1 (8	, ##a) */
-/* #define V850_SIM_SYS_link(a...)	V850_SIM_SYSCALL_1 (9	, ##a) */
-/* #define V850_SIM_SYS_unlink(a...)	V850_SIM_SYSCALL_1 (10	, ##a) */
-#define V850_SIM_SYS_execv(a...)	V850_SIM_SYSCALL_2 (11	, ##a)
-/* #define V850_SIM_SYS_chdir(a...)	V850_SIM_SYSCALL_1 (12	, ##a) */
-/* #define V850_SIM_SYS_mknod(a...)	V850_SIM_SYSCALL_1 (14	, ##a) */
-#define V850_SIM_SYS_chmod(a...)	V850_SIM_SYSCALL_2 (15	, ##a)
-#define V850_SIM_SYS_chown(a...)	V850_SIM_SYSCALL_2 (16	, ##a)
-#define V850_SIM_SYS_lseek(a...)	V850_SIM_SYSCALL_3 (19	, ##a)
-/* #define V850_SIM_SYS_getpid(a...)	V850_SIM_SYSCALL_1 (20	, ##a) */
-/* #define V850_SIM_SYS_isatty(a...)	V850_SIM_SYSCALL_1 (21	, ##a) */
-/* #define V850_SIM_SYS_fstat(a...)	V850_SIM_SYSCALL_1 (22	, ##a) */
-#define V850_SIM_SYS_time(a...)		V850_SIM_SYSCALL_1 (23	, ##a)
-#define V850_SIM_SYS_poll(a...)		V850_SIM_SYSCALL_3 (24	, ##a)
-#define V850_SIM_SYS_stat(a...)		V850_SIM_SYSCALL_2 (38	, ##a)
-#define V850_SIM_SYS_pipe(a...)		V850_SIM_SYSCALL_1 (42	, ##a)
-#define V850_SIM_SYS_times(a...)	V850_SIM_SYSCALL_1 (43	, ##a)
-#define V850_SIM_SYS_execve(a...)	V850_SIM_SYSCALL_3 (59	, ##a)
-#define V850_SIM_SYS_gettimeofday(a...)	V850_SIM_SYSCALL_2 (116	, ##a)
-/* #define V850_SIM_SYS_utime(a...)	V850_SIM_SYSCALL_2 (201	, ##a) */
-/* #define V850_SIM_SYS_wait(a...)	V850_SIM_SYSCALL_1 (202	, ##a) */
-
-#define V850_SIM_SYS_make_raw(a...)	V850_SIM_SYSCALL_1 (1024 , ##a)
-
-
-#define V850_SIM_SYSCALL_0(_call)					      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call)				      \
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-#define V850_SIM_SYSCALL_1(_call, _arg0)				      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call), "r" (arg0)			      \
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-#define V850_SIM_SYSCALL_2(_call, _arg0, _arg1)				      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
-	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call), "r" (arg0), "r" (arg1)	      \
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-#define V850_SIM_SYSCALL_3(_call, _arg0, _arg1, _arg2)			      \
-({									      \
-	register int call __asm__ ("r6") = _call;			      \
-	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
-	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
-	register long arg2 __asm__ ("r9") = (long)_arg2;		      \
-	register int rval __asm__ ("r10");				      \
-	__asm__ __volatile__ ("trap 31"					      \
-			      : "=r" (rval)				      \
-			      : "r" (call), "r" (arg0), "r" (arg1), "r" (arg2)\
-			      : "r11", "memory");			      \
-	rval;								      \
-})
-
-#define V850_SIM_SYSCALL(call, args...) \
-   V850_SIM_SYS_##call (args)
-
-#endif /* __V850_SIMSYSCALL_H__ */
diff --git a/include/asm-v850/socket.h b/include/asm-v850/socket.h
deleted file mode 100644
index e199a2bf12aa..000000000000
--- a/include/asm-v850/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __V850_SOCKET_H__
-#define __V850_SOCKET_H__
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#endif /* __V850_SOCKET_H__ */
diff --git a/include/asm-v850/sockios.h b/include/asm-v850/sockios.h
deleted file mode 100644
index 823e106e6cd0..000000000000
--- a/include/asm-v850/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __V850_SOCKIOS_H__
-#define __V850_SOCKIOS_H__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* __V850_SOCKIOS_H__ */
diff --git a/include/asm-v850/stat.h b/include/asm-v850/stat.h
deleted file mode 100644
index c68c60d06e2f..000000000000
--- a/include/asm-v850/stat.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-v850/stat.h -- v850 stat structure
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_STAT_H__
-#define __V850_STAT_H__
-
-#include <asm/posix_types.h>
-
-struct stat {
-	unsigned int	st_dev;
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int 	st_uid;
-	unsigned int 	st_gid;
-	unsigned int	st_rdev;
-	long		st_size;
-	unsigned long	st_blksize;
-	unsigned long	st_blocks;
-	unsigned long	st_atime;
-	unsigned long	__unused1;
-	unsigned long	st_mtime;
-	unsigned long	__unused2;
-	unsigned long	st_ctime;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-	unsigned long	__unused5;
-};
-
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned long	__unused1;
-
-	unsigned long long	st_ino;
-
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned long	__unused3;
-
-	long long	st_size;
-	unsigned long	st_blksize;
-
-	unsigned long	st_blocks; /* No. of 512-byte blocks allocated */
-	unsigned long	__unused4; /* future possible st_blocks high bits */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long	__unused8;
-};
-
-#endif /* __V850_STAT_H__ */
diff --git a/include/asm-v850/statfs.h b/include/asm-v850/statfs.h
deleted file mode 100644
index ea1596607f26..000000000000
--- a/include/asm-v850/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_STATFS_H__
-#define __V850_STATFS_H__
-
-#include <asm-generic/statfs.h>
-
-#endif /* __V850_STATFS_H__ */
diff --git a/include/asm-v850/string.h b/include/asm-v850/string.h
deleted file mode 100644
index 478e234789d6..000000000000
--- a/include/asm-v850/string.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/string.h -- Architecture specific string routines
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_STRING_H__
-#define __V850_STRING_H__
-
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_MEMMOVE
-
-extern void *memcpy (void *, const void *, __kernel_size_t);
-extern void *memset (void *, int, __kernel_size_t);
-extern void *memmove (void *, const void *, __kernel_size_t);
-
-#endif /* __V850_STRING_H__ */
diff --git a/include/asm-v850/system.h b/include/asm-v850/system.h
deleted file mode 100644
index 7daf1fdee119..000000000000
--- a/include/asm-v850/system.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * include/asm-v850/system.h -- Low-level interrupt/thread ops
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SYSTEM_H__
-#define __V850_SYSTEM_H__
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.
- */
-struct thread_struct;
-extern void *switch_thread (struct thread_struct *last,
-			    struct thread_struct *next);
-#define switch_to(prev,next,last)					      \
-  do {									      \
-        if (prev != next) {						      \
- 		(last) = switch_thread (&prev->thread, &next->thread);	      \
-	}								      \
-  } while (0)
-
-
-/* Enable/disable interrupts.  */
-#define local_irq_enable()	__asm__ __volatile__ ("ei")
-#define local_irq_disable()	__asm__ __volatile__ ("di")
-
-#define local_save_flags(flags) \
-  __asm__ __volatile__ ("stsr %1, %0" : "=r" (flags) : "i" (SR_PSW))
-#define local_restore_flags(flags) \
-  __asm__ __volatile__ ("ldsr %0, %1" :: "r" (flags), "i" (SR_PSW))
-
-/* For spinlocks etc */
-#define	local_irq_save(flags) \
-  do { local_save_flags (flags); local_irq_disable (); } while (0) 
-#define local_irq_restore(flags) \
-  local_restore_flags (flags);
-
-
-static inline int irqs_disabled (void)
-{
-	unsigned flags;
-	local_save_flags (flags);
-	return !!(flags & 0x20);
-}
-
-
-/*
- * Force strict CPU ordering.
- * Not really required on v850...
- */
-#define nop()			__asm__ __volatile__ ("nop")
-#define mb()			__asm__ __volatile__ ("" ::: "memory")
-#define rmb()			mb ()
-#define wmb()			mb ()
-#define read_barrier_depends()	((void)0)
-#define set_mb(var, value)	do { xchg (&var, value); } while (0)
-
-#define smp_mb()	mb ()
-#define smp_rmb()	rmb ()
-#define smp_wmb()	wmb ()
-#define smp_read_barrier_depends()	read_barrier_depends()
-
-#define xchg(ptr, with) \
-  ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr))))
-
-static inline unsigned long __xchg (unsigned long with,
-				    __volatile__ void *ptr, int size)
-{
-	unsigned long tmp, flags;
-
-	local_irq_save (flags);
-
-	switch (size) {
-	case 1:
-		tmp = *(unsigned char *)ptr;
-		*(unsigned char *)ptr = with;
-		break;
-	case 2:
-		tmp = *(unsigned short *)ptr;
-		*(unsigned short *)ptr = with;
-		break;
-	case 4:
-		tmp = *(unsigned long *)ptr;
-		*(unsigned long *)ptr = with;
-		break;
-	}
-
-	local_irq_restore (flags);
-
-	return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif /* __V850_SYSTEM_H__ */
diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h
deleted file mode 100644
index acc8c7d95329..000000000000
--- a/include/asm-v850/teg.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/asm-v850/teg.h -- NB85E-TEG cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TEG_H__
-#define __V850_TEG_H__
-
-
-/* The TEG uses the V850E cpu core.  */
-#include <asm/v850e.h>
-#include <asm/v850e_cache.h>
-
-
-#define CPU_MODEL	"v850e/nb85e-teg"
-#define CPU_MODEL_LONG	"NEC V850E/NB85E TEG"
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  On the NB85E/TEG,
-   There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
-   address to be addressable by a 16-bit signed offset, so we only use the
-   second half of it starting from 0xFFFF8000.  */
-#define R0_RAM_ADDR			0xFFFF8000
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
-   Some of these are parameterized even though there's only a single
-   interrupt, for compatibility with some generic code that works on other
-   processor models.  */
-#define IRQ_INTCMD(n)	6	/* interval timer interrupt */
-#define IRQ_INTCMD_NUM	1
-#define IRQ_INTSER(n)	16	/* UART reception error */
-#define IRQ_INTSER_NUM	1
-#define IRQ_INTSR(n)	17	/* UART reception completion */
-#define IRQ_INTSR_NUM	1
-#define IRQ_INTST(n)	18	/* UART transmission completion */
-#define IRQ_INTST_NUM	1
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS	64
-
-
-/* TEG UART details.  */
-#define V850E_UART_BASE_ADDR(n)		(0xFFFFF600 + 0x10 * (n))
-#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x8)
-#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xA)
-#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xC)
-#define V850E_UART_NUM_CHANNELS		1
-#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	teg_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void teg_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud);
-#endif
-
-
-/* The TEG RTPU.  */
-#define V850E_RTPU_BASE_ADDR		0xFFFFF210
-
-
-/* TEG series timer D details.  */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF210
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x8)
-#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
-
-
-/* `Interrupt Source Select' control register.  */
-#define TEG_ISS_ADDR			0xFFFFF7FA
-#define TEG_ISS				(*(volatile u8 *)TEG_ISS_ADDR)
-
-/* Port 0 I/O register (bits 0-3 used).  */
-#define TEG_PORT0_IO_ADDR		0xFFFFF7F2
-#define TEG_PORT0_IO			(*(volatile u8 *)TEG_PORT0_IO_ADDR)
-/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input).  */
-#define TEG_PORT0_PM_ADDR		0xFFFFF7F4
-#define TEG_PORT0_PM			(*(volatile u8 *)TEG_PORT0_PM_ADDR)
-
-
-#ifndef __ASSEMBLY__
-extern void teg_init_irqs (void);
-#endif
-
-
-#endif /* __V850_TEG_H__ */
diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h
deleted file mode 100644
index 295d7bf69451..000000000000
--- a/include/asm-v850/termbits.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __V850_TERMBITS_H__
-#define __V850_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define	IBSHIFT	16		/* Shifr from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __V850_TERMBITS_H__ */
diff --git a/include/asm-v850/termios.h b/include/asm-v850/termios.h
deleted file mode 100644
index fcd171838d9c..000000000000
--- a/include/asm-v850/termios.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef __V850_TERMIOS_H__
-#define __V850_TERMIOS_H__
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __V850_TERMIOS_H__ */
diff --git a/include/asm-v850/thread_info.h b/include/asm-v850/thread_info.h
deleted file mode 100644
index 1a9e6ae0c5fd..000000000000
--- a/include/asm-v850/thread_info.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * include/asm-v850/thread_info.h -- v850 low-level thread information
- *
- *  Copyright (C) 2002  NEC Corporation
- *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
- *    - Incorporating suggestions made by Linus Torvalds and Dave Miller
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived from the PPC version, include/asm-ppc/thread_info.h
- * which was adapted from the i386 version by Paul Mackerras
- */
-
-#ifndef __V850_THREAD_INFO_H__
-#define __V850_THREAD_INFO_H__
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	unsigned long		flags;		/* low level flags */
-	int			cpu;		/* cpu we're on */
-	int			preempt_count;	/* 0 => preemptable,
-						   <0 => BUG */
-	struct restart_block	restart_block;
-};
-
-#define INIT_THREAD_INFO(tsk)						      \
-{									      \
-	.task =		&tsk,						      \
-	.exec_domain =	&default_exec_domain,				      \
-	.flags =	0,						      \
-	.cpu =		0,						      \
-	.preempt_count = 1,						      \
-	.restart_block = {						      \
-		.fn = do_no_restart_syscall,				      \
-	},								      \
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
-				__get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
-
-#endif /* __ASSEMBLY__ */
-
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK		0
-#define TI_EXECDOMAIN	4
-#define TI_FLAGS	8
-#define TI_CPU		12
-#define TI_PREEMPT	16
-
-#define PREEMPT_ACTIVE		0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
-					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
-
-
-/* Size of kernel stack for each process.  */
-#define THREAD_SIZE		0x2000
-
-/* The alignment of kernel threads, with thread_info structures at their
-   base.  Thus, a pointer for a task's task structure can be derived from
-   its kernel stack pointer.  */
-#define THREAD_ALIGNMENT	THREAD_SIZE
-#define THREAD_MASK		(-THREAD_ALIGNMENT)
-
-
-#ifdef __ASSEMBLY__
-
-/* Put a pointer to the current thread_info structure into REG.  Note that
-   this definition requires THREAD_MASK to be representable as a signed
-   16-bit value.  */
-#define GET_CURRENT_THREAD(reg)						\
-        /* Use `addi' and then `and' instead of just `andi', because	\
-	   `addi' sign-extends the immediate value, whereas `andi'	\
-	   zero-extends it.  */						\
-	addi	THREAD_MASK, r0, reg;					\
-	and	sp, reg
-
-#else
-
-/* Return a pointer to the current thread_info structure.  */
-static inline struct thread_info *current_thread_info (void)
-{
-	register unsigned long sp __asm__ ("sp");
-	return (struct thread_info *)(sp & THREAD_MASK);
-}
-
-#endif /* __ASSEMBLY__ */
-
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_THREAD_INFO_H__ */
diff --git a/include/asm-v850/timex.h b/include/asm-v850/timex.h
deleted file mode 100644
index 6279e5a0ee8e..000000000000
--- a/include/asm-v850/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-v850/timex.h
- *
- * v850 architecture timex specifications
- */
-#ifndef __V850_TIMEX_H__
-#define __V850_TIMEX_H__
-
-#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
-	return 0;
-}
-
-#endif /* __V850_TIMEX_H__ */
diff --git a/include/asm-v850/tlb.h b/include/asm-v850/tlb.h
deleted file mode 100644
index 73bc9ead40dd..000000000000
--- a/include/asm-v850/tlb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-v850/tlb.h
- *
- *  Copyright (C) 2002  NEC Corporation
- *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TLB_H__
-#define __V850_TLB_H__
-
-#define tlb_flush(tlb)	((void)0)
-
-#include <asm-generic/tlb.h>
-
-#endif /* __V850_TLB_H__ */
diff --git a/include/asm-v850/tlbflush.h b/include/asm-v850/tlbflush.h
deleted file mode 100644
index c44aa64449c8..000000000000
--- a/include/asm-v850/tlbflush.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-v850/tlbflush.h
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TLBFLUSH_H__
-#define __V850_TLBFLUSH_H__
-
-#include <asm/machdep.h>
-
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
-	BUG ();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
-	BUG ();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-	BUG ();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
-	BUG ();
-}
-
-#endif /* __V850_TLBFLUSH_H__ */
diff --git a/include/asm-v850/topology.h b/include/asm-v850/topology.h
deleted file mode 100644
index 6040e41d7945..000000000000
--- a/include/asm-v850/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_TOPOLOGY_H__
-#define __V850_TOPOLOGY_H__
-
-#include <asm-generic/topology.h>
-
-#endif /* __V850_TOPOLOGY_H__ */
diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h
deleted file mode 100644
index 89f735ee41dd..000000000000
--- a/include/asm-v850/types.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __V850_TYPES_H__
-#define __V850_TYPES_H__
-
-#ifndef __ASSEMBLY__
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-typedef unsigned short umode_t;
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_TYPES_H__ */
diff --git a/include/asm-v850/uaccess.h b/include/asm-v850/uaccess.h
deleted file mode 100644
index 64563c409bb2..000000000000
--- a/include/asm-v850/uaccess.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef __V850_UACCESS_H__
-#define __V850_UACCESS_H__
-
-/*
- * User space memory access functions
- */
-
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-#include <asm/machdep.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-static inline int access_ok (int type, const void *addr, unsigned long size)
-{
-	/* XXX I guess we should check against real ram bounds at least, and
-	   possibly make sure ADDR is not within the kernel.
-	   For now we just check to make sure it's not a small positive
-	   or negative value, as that will at least catch some kinds of
-	   error.  In particular, we make sure that ADDR's not within the
-	   interrupt vector area, which we know starts at zero, or within the
-	   peripheral-I/O area, which is located just _before_ zero.  */
-	unsigned long val = (unsigned long)addr;
-	return val >= (0x80 + NUM_CPU_IRQS*16) && val < 0xFFFFF000;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table (unsigned long);
-
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- */
-
-extern int bad_user_access_length (void);
-
-#define __get_user(var, ptr)						      \
-  ({									      \
-	  int __gu_err = 0;						      \
-	  typeof(*(ptr)) __gu_val = 0;					      \
-	  switch (sizeof (*(ptr))) {					      \
-	  case 1:							      \
-	  case 2:							      \
-	  case 4:							      \
-		  __gu_val = *(ptr);					      \
-		  break;						      \
-	  case 8:							      \
-		  memcpy(&__gu_val, ptr, sizeof(__gu_val));		      \
-		  break;						      \
-	  default:							      \
-		  __gu_val = 0;						      \
-		  __gu_err = __get_user_bad ();				      \
-		  break;						      \
-	  }								      \
-	  (var) = __gu_val;						      \
-	  __gu_err;							      \
-  })
-#define __get_user_bad()	(bad_user_access_length (), (-EFAULT))
-
-#define __put_user(var, ptr)						      \
-  ({									      \
-	  int __pu_err = 0;						      \
-	  switch (sizeof (*(ptr))) {					      \
-	  case 1:							      \
-	  case 2:							      \
-	  case 4:							      \
-		  *(ptr) = (var);					      \
-		  break;						      \
-	  case 8: {							      \
-	  	  typeof(*(ptr)) __pu_val = 0;				      \
-		  memcpy(ptr, &__pu_val, sizeof(__pu_val));		      \
-		  }							      \
-		  break;						      \
-	  default:							      \
-		  __pu_err = __put_user_bad ();				      \
-		  break;						      \
-	  }								      \
-	  __pu_err;							      \
-  })
-#define __put_user_bad()	(bad_user_access_length (), (-EFAULT))
-
-#define put_user(x, ptr)	__put_user(x, ptr)
-#define get_user(x, ptr)	__get_user(x, ptr)
-
-#define __copy_from_user(to, from, n)	(memcpy (to, from, n), 0)
-#define __copy_to_user(to, from, n)	(memcpy(to, from, n), 0)
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_from_user(to, from, n)	__copy_from_user (to, from, n)
-#define copy_to_user(to, from, n) 	__copy_to_user(to, from, n)
-
-#define copy_to_user_ret(to,from,n,retval) \
-  ({ if (copy_to_user (to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) \
-  ({ if (copy_from_user (to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user (char *dst, const char *src, long count)
-{
-	char *tmp;
-	strncpy (dst, src, count);
-	for (tmp = dst; *tmp && count > 0; tmp++, count--)
-		;
-	return tmp - dst;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user (const char *src, long n)
-{
-	return strlen (src) + 1;
-}
-
-#define strlen_user(str)	strnlen_user (str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-clear_user (void *to, unsigned long n)
-{
-	memset (to, 0, n);
-	return 0;
-}
-
-#endif /* __V850_UACCESS_H__ */
diff --git a/include/asm-v850/ucontext.h b/include/asm-v850/ucontext.h
deleted file mode 100644
index 303c21590cff..000000000000
--- a/include/asm-v850/ucontext.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __V850_UCONTEXT_H__
-#define __V850_UCONTEXT_H__
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* __V850_UCONTEXT_H__ */
diff --git a/include/asm-v850/unaligned.h b/include/asm-v850/unaligned.h
deleted file mode 100644
index 53122b28491e..000000000000
--- a/include/asm-v850/unaligned.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Note that some v850 chips support unaligned access, but it seems too
- * annoying to use.
- */
-#ifndef _ASM_V850_UNALIGNED_H
-#define _ASM_V850_UNALIGNED_H
-
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-
-#endif /* _ASM_V850_UNALIGNED_H */
diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h
deleted file mode 100644
index 2241ed45ecfe..000000000000
--- a/include/asm-v850/unistd.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * include/asm-v850/unistd.h -- System call numbers and invocation mechanism
- *
- *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_UNISTD_H__
-#define __V850_UNISTD_H__
-
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_break		 17
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_setpgid		 57
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_ugetrlimit	 	 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_vhangup		111
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread		180
-#define __NR_pwrite		181
-#define __NR_lchown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_fcntl64		198
-#define __NR_getdents64		199
-#define __NR_pivot_root		200
-#define __NR_gettid		201
-#define __NR_tkill		202
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- */
-#define cond_syscall(name)						      \
-  asm (".weak\t" C_SYMBOL_STRING(name) ";"				      \
-       ".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall))
-#if 0
-/* This doesn't work if there's a function prototype for NAME visible,
-   because the argument types probably won't match.  */
-#define cond_syscall(name)  \
-  void name (void) __attribute__ ((weak, alias ("sys_ni_syscall")));
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __V850_UNISTD_H__ */
diff --git a/include/asm-v850/user.h b/include/asm-v850/user.h
deleted file mode 100644
index 63cdc567d272..000000000000
--- a/include/asm-v850/user.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef __V850_USER_H__
-#define __V850_USER_H__
-
-/* Adapted from <asm-ppc/user.h>.  */
-
-#include <linux/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
- * are as follows:
- *
- *  upage: 1 page consisting of a user struct that tells gdb
- *	what is present in the file.  Directly after this is a
- *	copy of the task_struct, which is currently not used by gdb,
- *	but it may come in handy at some point.  All of the registers
- *	are stored as part of the upage.  The upage should always be
- *	only one page long.
- *  data: The data segment follows next.  We use current->end_text to
- *	current->brk to pick up all of the user variables, plus any memory
- *	that may have been sbrk'ed.  No attempt is made to determine if a
- *	page is demand-zero or if a page is totally unused, we just cover
- *	the entire range.  All of the addresses are rounded in such a way
- *	that an integral number of pages is written.
- *  stack: We need the stack information in order to get a meaningful
- *	backtrace.  We need to write the data from usp to
- *	current->start_stack, so we round each of these in order to be able
- *	to write an integer number of pages.
- */
-struct user {
-	struct pt_regs	regs;			/* entire machine state */
-	size_t		u_tsize;		/* text size (pages) */
-	size_t		u_dsize;		/* data size (pages) */
-	size_t		u_ssize;		/* stack size (pages) */
-	unsigned long	start_code;		/* text starting address */
-	unsigned long	start_data;		/* data starting address */
-	unsigned long	start_stack;		/* stack starting address */
-	long int	signal;			/* signal causing core dump */
-	unsigned long	u_ar0;			/* help gdb find registers */
-	unsigned long	magic;			/* identifies a core file */
-	char		u_comm[32];		/* user command name */
-};
-
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
-#endif /* __V850_USER_H__ */
diff --git a/include/asm-v850/v850e.h b/include/asm-v850/v850e.h
deleted file mode 100644
index 5a222eb5117f..000000000000
--- a/include/asm-v850/v850e.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-v850/v850e.h -- V850E CPU
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_H__
-#define __V850_V850E_H__
-
-#include <asm/v850e_intc.h>
-
-#define CPU_ARCH "v850e"
-
-#endif /* __V850_V850E_H__ */
diff --git a/include/asm-v850/v850e2.h b/include/asm-v850/v850e2.h
deleted file mode 100644
index 48680408ab7e..000000000000
--- a/include/asm-v850/v850e2.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-v850/v850e2.h -- Machine-dependent defs for V850E2 CPUs
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E2_H__
-#define __V850_V850E2_H__
-
-#include <asm/v850e_intc.h>	/* v850e-style interrupt system.  */
-
-
-#define CPU_ARCH "v850e2"
-
-
-/* Control registers.  */
-
-/* Chip area select control */ 
-#define V850E2_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
-#define V850E2_CSC(n)		(*(volatile u16 *)V850E2_CSC_ADDR(n))
-/* I/O area select control */
-#define V850E2_BPC_ADDR		0xFFFFF064
-#define V850E2_BPC		(*(volatile u16 *)V850E2_BPC_ADDR)
-/* Bus size configuration */
-#define V850E2_BSC_ADDR		0xFFFFF066
-#define V850E2_BSC		(*(volatile u16 *)V850E2_BSC_ADDR)
-/* Endian configuration */
-#define V850E2_BEC_ADDR		0xFFFFF068
-#define V850E2_BEC		(*(volatile u16 *)V850E2_BEC_ADDR)
-/* Cache configuration */
-#define V850E2_BHC_ADDR		0xFFFFF06A
-#define V850E2_BHC		(*(volatile u16 *)V850E2_BHC_ADDR)
-/* NPB strobe-wait configuration */
-#define V850E2_VSWC_ADDR	0xFFFFF06E
-#define V850E2_VSWC		(*(volatile u16 *)V850E2_VSWC_ADDR)
-/* Bus cycle type */
-#define V850E2_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
-#define V850E2_BCT(n)		(*(volatile u16 *)V850E2_BCT_ADDR(n))
-/* Data wait control */
-#define V850E2_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
-#define V850E2_DWC(n)		(*(volatile u16 *)V850E2_DWC_ADDR(n))
-/* Bus cycle control */
-#define V850E2_BCC_ADDR		0xFFFFF488
-#define V850E2_BCC		(*(volatile u16 *)V850E2_BCC_ADDR)
-/* Address wait control */
-#define V850E2_ASC_ADDR		0xFFFFF48A
-#define V850E2_ASC		(*(volatile u16 *)V850E2_ASC_ADDR)
-/* Local bus sizing control */
-#define V850E2_LBS_ADDR		0xFFFFF48E
-#define V850E2_LBS		(*(volatile u16 *)V850E2_LBS_ADDR)
-/* Line buffer control */
-#define V850E2_LBC_ADDR(n)	(0xFFFFF490 + (n) * 2)
-#define V850E2_LBC(n)		(*(volatile u16 *)V850E2_LBC_ADDR(n))
-/* SDRAM configuration */
-#define V850E2_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
-#define V850E2_SCR(n)		(*(volatile u16 *)V850E2_SCR_ADDR(n))
-/* SDRAM refresh cycle control */
-#define V850E2_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
-#define V850E2_RFS(n)		(*(volatile u16 *)V850E2_RFS_ADDR(n))
-
-
-#endif /* __V850_V850E2_H__ */
diff --git a/include/asm-v850/v850e2_cache.h b/include/asm-v850/v850e2_cache.h
deleted file mode 100644
index 87edf0d311d5..000000000000
--- a/include/asm-v850/v850e2_cache.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-v850/v850e2_cache_cache.h -- Cache control for V850E2
- * 	cache memories
- *
- *  Copyright (C) 2003,05  NEC Electronics Corporation
- *  Copyright (C) 2003,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E2_CACHE_H__
-#define __V850_V850E2_CACHE_H__
-
-#include <asm/types.h>
-
-
-/* Cache control registers.  */
-
-/* Bus Transaction Control */
-#define V850E2_CACHE_BTSC_ADDR	0xFFFFF070
-#define V850E2_CACHE_BTSC 	(*(volatile u16 *)V850E2_CACHE_BTSC_ADDR)
-#define V850E2_CACHE_BTSC_ICM	0x0001 /* icache enable */
-#define V850E2_CACHE_BTSC_DCM0	0x0004 /* dcache enable, bit 0 */
-#define V850E2_CACHE_BTSC_DCM1	0x0008 /* dcache enable, bit 1 */
-#define V850E2_CACHE_BTSC_DCM_WT		      /* write-through */ \
-			V850E2_CACHE_BTSC_DCM0
-#ifdef CONFIG_V850E2_V850E2S
-# define V850E2_CACHE_BTSC_DCM_WB_NO_ALLOC    /* write-back, non-alloc */ \
-			V850E2_CACHE_BTSC_DCM1	
-# define V850E2_CACHE_BTSC_DCM_WB_ALLOC	      /* write-back, non-alloc */ \
-			(V850E2_CACHE_BTSC_DCM1 | V850E2_CACHE_BTSC_DCM0)
-# define V850E2_CACHE_BTSC_ISEQ	0x0010 /* icache `address sequence mode' */
-# define V850E2_CACHE_BTSC_DSEQ	0x0020 /* dcache `address sequence mode' */
-# define V850E2_CACHE_BTSC_IRFC	0x0030
-# define V850E2_CACHE_BTSC_ILCD	0x4000
-# define V850E2_CACHE_BTSC_VABE	0x8000
-#endif /* CONFIG_V850E2_V850E2S */
-
-/* Cache operation start address register (low-bits).  */
-#define V850E2_CACHE_CADL_ADDR	0xFFFFF074
-#define V850E2_CACHE_CADL 	(*(volatile u16 *)V850E2_CACHE_CADL_ADDR)
-/* Cache operation start address register (high-bits).  */
-#define V850E2_CACHE_CADH_ADDR	0xFFFFF076
-#define V850E2_CACHE_CADH 	(*(volatile u16 *)V850E2_CACHE_CADH_ADDR)
-/* Cache operation count register.  */
-#define V850E2_CACHE_CCNT_ADDR	0xFFFFF078
-#define V850E2_CACHE_CCNT 	(*(volatile u16 *)V850E2_CACHE_CCNT_ADDR)
-/* Cache operation specification register.  */
-#define V850E2_CACHE_COPR_ADDR	0xFFFFF07A
-#define V850E2_CACHE_COPR 	(*(volatile u16 *)V850E2_CACHE_COPR_ADDR)
-#define V850E2_CACHE_COPR_STRT	0x0001 /* start cache operation */
-#define V850E2_CACHE_COPR_LBSL	0x0100 /* 0 = icache, 1 = dcache */
-#define V850E2_CACHE_COPR_WSLE	0x0200 /* operate on cache way */
-#define V850E2_CACHE_COPR_WSL(way) ((way) * 0x0400) /* way select */
-#define V850E2_CACHE_COPR_CFC(op)  ((op)  * 0x1000) /* cache function code */
-
-
-/* Size of a cache line in bytes.  */
-#define V850E2_CACHE_LINE_SIZE_BITS	4
-#define V850E2_CACHE_LINE_SIZE		(1 << V850E2_CACHE_LINE_SIZE_BITS)
-
-/* The size of each cache `way' in lines.  */
-#define V850E2_CACHE_WAY_SIZE		256
-
-
-/* For <asm/cache.h> */
-#define L1_CACHE_BYTES			V850E2_CACHE_LINE_SIZE
-#define L1_CACHE_SHIFT			V850E2_CACHE_LINE_SIZE_BITS
-
-
-#endif /* __V850_V850E2_CACHE_H__ */
diff --git a/include/asm-v850/v850e_cache.h b/include/asm-v850/v850e_cache.h
deleted file mode 100644
index aa7d7eb9da50..000000000000
--- a/include/asm-v850/v850e_cache.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/v850e_cache.h -- Cache control for V850E cache memories
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
-   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
-   CPU.  V850E2 processors have their own (better) cache
-   implementation.  */
-
-#ifndef __V850_V850E_CACHE_H__
-#define __V850_V850E_CACHE_H__
-
-#include <asm/types.h>
-
-
-/* Cache control registers.  */
-#define V850E_CACHE_BHC_ADDR	0xFFFFF06A
-#define V850E_CACHE_BHC		(*(volatile u16 *)V850E_CACHE_BHC_ADDR)
-#define V850E_CACHE_ICC_ADDR	0xFFFFF070
-#define V850E_CACHE_ICC		(*(volatile u16 *)V850E_CACHE_ICC_ADDR)
-#define V850E_CACHE_ISI_ADDR	0xFFFFF072
-#define V850E_CACHE_ISI		(*(volatile u16 *)V850E_CACHE_ISI_ADDR)
-#define V850E_CACHE_DCC_ADDR	0xFFFFF078
-#define V850E_CACHE_DCC		(*(volatile u16 *)V850E_CACHE_DCC_ADDR)
-
-/* Size of a cache line in bytes.  */
-#define V850E_CACHE_LINE_SIZE	16
-
-/* For <asm/cache.h> */
-#define L1_CACHE_BYTES		V850E_CACHE_LINE_SIZE
-
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-/* Set caching params via the BHC, ICC, and DCC registers.  */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc);
-#endif /* __KERNEL__ && !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_CACHE_H__ */
diff --git a/include/asm-v850/v850e_intc.h b/include/asm-v850/v850e_intc.h
deleted file mode 100644
index 6fdf95708317..000000000000
--- a/include/asm-v850/v850e_intc.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * include/asm-v850/v850e_intc.h -- V850E CPU interrupt controller (INTC)
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_INTC_H__
-#define __V850_V850E_INTC_H__
-
-
-/* There are 4 16-bit `Interrupt Mask Registers' located contiguously
-   starting from this base.  Each interrupt uses a single bit to
-   indicated enabled/disabled status.  */
-#define V850E_INTC_IMR_BASE_ADDR  0xFFFFF100
-#define V850E_INTC_IMR_ADDR(irq)  (V850E_INTC_IMR_BASE_ADDR + ((irq) >> 3))
-#define V850E_INTC_IMR_BIT(irq)	  ((irq) & 0x7)
-
-/* Each maskable interrupt has a single-byte control register at this
-   address.  */
-#define V850E_INTC_IC_BASE_ADDR	  0xFFFFF110
-#define V850E_INTC_IC_ADDR(irq)	  (V850E_INTC_IC_BASE_ADDR + ((irq) << 1))
-#define V850E_INTC_IC(irq)	  (*(volatile u8 *)V850E_INTC_IC_ADDR(irq))
-/* Encode priority PR for storing in an interrupt control register.  */
-#define V850E_INTC_IC_PR(pr)	  (pr)
-/* Interrupt disable bit in an interrupt control register.  */
-#define V850E_INTC_IC_MK_BIT	  6
-#define V850E_INTC_IC_MK	  (1 << V850E_INTC_IC_MK_BIT)
-/* Interrupt pending flag in an interrupt control register.  */
-#define V850E_INTC_IC_IF_BIT	  7
-#define V850E_INTC_IC_IF	  (1 << V850E_INTC_IC_IF_BIT)
-
-/* The ISPR (In-service priority register) contains one bit for each interrupt
-   priority level, which is set to one when that level is currently being
-   serviced (and thus blocking any interrupts of equal or lesser level).  */
-#define V850E_INTC_ISPR_ADDR	  0xFFFFF1FA
-#define V850E_INTC_ISPR		  (*(volatile u8 *)V850E_INTC_ISPR_ADDR)
-
-
-#ifndef __ASSEMBLY__
-
-/* Enable interrupt handling for interrupt IRQ.  */
-static inline void v850e_intc_enable_irq (unsigned irq)
-{
-	__asm__ __volatile__ ("clr1 %0, [%1]"
-			      :: "r" (V850E_INTC_IMR_BIT (irq)),
-			         "r" (V850E_INTC_IMR_ADDR (irq))
-			      : "memory");
-}
-
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `v850e_intc_clear_pending_irq'.  */
-static inline void v850e_intc_disable_irq (unsigned irq)
-{
-	__asm__ __volatile__ ("set1 %0, [%1]"
-			      :: "r" (V850E_INTC_IMR_BIT (irq)),
-			         "r" (V850E_INTC_IMR_ADDR (irq))
-			      : "memory");
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-static inline int v850e_intc_irq_enabled (unsigned irq)
-{
-	int rval;
-	__asm__ __volatile__ ("tst1 %1, [%2]; setf z, %0"
-			      : "=r" (rval)
-			      : "r" (V850E_INTC_IMR_BIT (irq)),
-			        "r" (V850E_INTC_IMR_ADDR (irq)));
-	return rval;
-}
-
-/* Disable irqs from 0 until LIMIT.  LIMIT must be a multiple of 8.  */
-static inline void _v850e_intc_disable_irqs (unsigned limit)
-{
-	unsigned long addr;
-	for (addr = V850E_INTC_IMR_BASE_ADDR; limit >= 8; addr++, limit -= 8)
-		*(char *)addr = 0xFF;
-}
-
-/* Disable all irqs.  This is purposely a macro, because NUM_MACH_IRQS
-   will be only be defined later.  */
-#define v850e_intc_disable_irqs()   _v850e_intc_disable_irqs (NUM_MACH_IRQS)
-
-/* Clear any pending interrupts for IRQ.  */
-static inline void v850e_intc_clear_pending_irq (unsigned irq)
-{
-	__asm__ __volatile__ ("clr1 %0, 0[%1]"
-			      :: "i" (V850E_INTC_IC_IF_BIT),
-			         "r" (V850E_INTC_IC_ADDR (irq))
-			      : "memory");
-}
-
-/* Return true if interrupt IRQ is pending (but disabled).  */
-static inline int v850e_intc_irq_pending (unsigned irq)
-{
-	int rval;
-	__asm__ __volatile__ ("tst1 %1, 0[%2]; setf nz, %0"
-			      : "=r" (rval)
-			      : "i" (V850E_INTC_IC_IF_BIT),
-			        "r" (V850E_INTC_IC_ADDR (irq)));
-	return rval;
-}
-
-
-struct v850e_intc_irq_init {
-	const char *name;	/* name of interrupt type */
-
-	/* Range of kernel irq numbers for this type:
-	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
-	unsigned base, num, interval;
-
-	unsigned priority;	/* interrupt priority to assign */
-};
-struct hw_interrupt_type;	/* fwd decl */
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-extern void v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
-				       struct hw_interrupt_type *hw_irq_types);
-
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_INTC_H__ */
diff --git a/include/asm-v850/v850e_timer_c.h b/include/asm-v850/v850e_timer_c.h
deleted file mode 100644
index f70575df6ea9..000000000000
--- a/include/asm-v850/v850e_timer_c.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_c.h -- `Timer C' component often used
- *	with the V850E cpu core
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* NOTE: this include file currently contains only enough to allow us to
-   use timer C as an interrupt pass-through.  */
-
-#ifndef __V850_V850E_TIMER_C_H__
-#define __V850_V850E_TIMER_C_H__
-
-#include <asm/types.h>
-#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
-
-
-/* Timer C (16-bit interval timers).  */
-
-/* Control register 0 for timer C.  */
-#define V850E_TIMER_C_TMCC0_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x6 + 0x10 *(n))
-#define V850E_TIMER_C_TMCC0(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC0_ADDR(n))
-#define V850E_TIMER_C_TMCC0_CAE	  0x01 /* clock action enable */
-#define V850E_TIMER_C_TMCC0_CE	  0x02 /* count enable */
-/* ... */
-
-/* Control register 1 for timer C.  */
-#define V850E_TIMER_C_TMCC1_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x8 + 0x10 *(n))
-#define V850E_TIMER_C_TMCC1(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC1_ADDR(n))
-#define V850E_TIMER_C_TMCC1_CMS0  0x01 /* capture/compare mode select (ccc0) */
-#define V850E_TIMER_C_TMCC1_CMS1  0x02 /* capture/compare mode select (ccc1) */
-/* ... */
-
-/* Interrupt edge-sensitivity control for timer C.  */
-#define V850E_TIMER_C_SESC_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x9 + 0x10 *(n))
-#define V850E_TIMER_C_SESC(n)	  (*(volatile u8 *)V850E_TIMER_C_SESC_ADDR(n))
-
-/* ...etc... */
-
-
-#endif /* __V850_V850E_TIMER_C_H__  */
diff --git a/include/asm-v850/v850e_timer_d.h b/include/asm-v850/v850e_timer_d.h
deleted file mode 100644
index 417612c5b22f..000000000000
--- a/include/asm-v850/v850e_timer_d.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.h -- `Timer D' component often used
- *	with the V850E cpu core
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_TIMER_D_H__
-#define __V850_V850E_TIMER_D_H__
-
-#include <asm/types.h>
-#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
-
-
-/* Timer D (16-bit interval timers).  */
-
-/* Count registers for timer D.  */
-#define V850E_TIMER_D_TMD_ADDR(n) (V850E_TIMER_D_TMD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_TMD(n)	  (*(volatile u16 *)V850E_TIMER_D_TMD_ADDR(n))
-
-/* Count compare registers for timer D.  */
-#define V850E_TIMER_D_CMD_ADDR(n) (V850E_TIMER_D_CMD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_CMD(n)	  (*(volatile u16 *)V850E_TIMER_D_CMD_ADDR(n))
-
-/* Control registers for timer D.  */
-#define V850E_TIMER_D_TMCD_ADDR(n) (V850E_TIMER_D_TMCD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_TMCD(n)	   (*(volatile u8 *)V850E_TIMER_D_TMCD_ADDR(n))
-/* Control bits for timer D.  */
-#define V850E_TIMER_D_TMCD_CE  	   0x2 /* count enable */
-#define V850E_TIMER_D_TMCD_CAE	   0x1 /* clock action enable */
-/* Clock divider setting (log2).  */
-#define V850E_TIMER_D_TMCD_CS(divlog2) (((divlog2) - V850E_TIMER_D_TMCD_CS_MIN) << 4)
-/* Minimum clock divider setting (log2).  */
-#ifndef V850E_TIMER_D_TMCD_CS_MIN /* Can be overridden by mach-specific hdrs */
-#define V850E_TIMER_D_TMCD_CS_MIN  2 /* Default is correct for the v850e/ma1 */
-#endif
-/* Maximum clock divider setting (log2).  */
-#define V850E_TIMER_D_TMCD_CS_MAX  (V850E_TIMER_D_TMCD_CS_MIN + 7)
-
-/* Return the clock-divider (log2) of timer D unit N.  */
-#define V850E_TIMER_D_DIVLOG2(n) \
-  (((V850E_TIMER_D_TMCD(n) >> 4) & 0x7) + V850E_TIMER_D_TMCD_CS_MIN)
-
-
-#ifndef __ASSEMBLY__
-
-/* Start interval timer TIMER (0-3).  The timer will issue the
-   corresponding INTCMD interrupt RATE times per second.  This function
-   does not enable the interrupt.  */
-extern void v850e_timer_d_configure (unsigned timer, unsigned rate);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_TIMER_D_H__  */
diff --git a/include/asm-v850/v850e_uart.h b/include/asm-v850/v850e_uart.h
deleted file mode 100644
index 5182fb4cc989..000000000000
--- a/include/asm-v850/v850e_uart.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-v850/v850e_uart.h -- common V850E on-chip UART driver
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* There's not actually a single UART implementation used by V850E CPUs,
-   but rather a series of implementations that are all `close' to one
-   another.  This file corresponds to the single driver which handles all
-   of them.  */
-
-#ifndef __V850_V850E_UART_H__
-#define __V850_V850E_UART_H__
-
-#include <linux/termios.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/types.h>
-#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
-
-
-/* Include model-specific definitions.  */
-#ifdef CONFIG_V850E_UART
-# ifdef CONFIG_V850E_UARTB
-#  include <asm-v850/v850e_uartb.h>
-# else
-#  include <asm-v850/v850e_uarta.h> /* original V850E UART */
-# endif
-#endif
-
-
-/* Optional capabilities some hardware provides.  */
-
-/* This UART doesn't implement RTS/CTS by default, but some platforms
-   implement them externally, so check to see if <asm/machdep.h> defined
-   anything.  */
-#ifdef V850E_UART_CTS
-#define v850e_uart_cts(n)		V850E_UART_CTS(n)
-#else
-#define v850e_uart_cts(n)		(1)
-#endif
-
-/* Do the same for RTS.  */
-#ifdef V850E_UART_SET_RTS
-#define v850e_uart_set_rts(n,v)		V850E_UART_SET_RTS(n,v)
-#else
-#define v850e_uart_set_rts(n,v)		((void)0)
-#endif
-
-
-/* This is the serial channel to use for the boot console (if desired).  */
-#ifndef V850E_UART_CONSOLE_CHANNEL
-# define V850E_UART_CONSOLE_CHANNEL 0
-#endif
-
-
-#ifndef __ASSEMBLY__
-
-/* Setup a console using channel 0 of the builtin uart.  */
-extern void v850e_uart_cons_init (unsigned chan);
-
-/* Configure and turn on uart channel CHAN, using the termios `control
-   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_UART_H__ */
diff --git a/include/asm-v850/v850e_uarta.h b/include/asm-v850/v850e_uarta.h
deleted file mode 100644
index e483e0950725..000000000000
--- a/include/asm-v850/v850e_uarta.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * include/asm-v850/v850e_uarta.h -- original V850E on-chip UART
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This is the original V850E UART implementation is called just `UART' in
-   the docs, but we name this header file <asm/v850e_uarta.h> because the
-   name <asm/v850e_uart.h> is used for the common driver that handles both
-   `UART' and `UARTB' implementations.  */
-
-#ifndef __V850_V850E_UARTA_H__
-#define __V850_V850E_UARTA_H__
-
-
-/* Raw hardware interface.  */
-
-/* The base address of the UART control registers for channel N.
-   The default is the address used on the V850E/MA1.  */
-#ifndef V850E_UART_BASE_ADDR
-#define V850E_UART_BASE_ADDR(n)		(0xFFFFFA00 + 0x10 * (n))
-#endif 
-
-/* Addresses of specific UART control registers for channel N.
-   The defaults are the addresses used on the V850E/MA1; if a platform
-   wants to redefine any of these, it must redefine them all.  */
-#ifndef V850E_UART_ASIM_ADDR
-#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x3)
-#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x5)
-#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x7)
-#endif
-
-/* UART config registers.  */
-#define V850E_UART_ASIM(n)	(*(volatile u8 *)V850E_UART_ASIM_ADDR(n))
-/* Control bits for config registers.  */
-#define V850E_UART_ASIM_CAE	0x80 /* clock enable */
-#define V850E_UART_ASIM_TXE	0x40 /* transmit enable */
-#define V850E_UART_ASIM_RXE	0x20 /* receive enable */
-#define V850E_UART_ASIM_PS_MASK	0x18 /* mask covering parity-select bits */
-#define V850E_UART_ASIM_PS_NONE	0x00 /* no parity */
-#define V850E_UART_ASIM_PS_ZERO	0x08 /* zero parity */
-#define V850E_UART_ASIM_PS_ODD	0x10 /* odd parity */
-#define V850E_UART_ASIM_PS_EVEN	0x18 /* even parity */
-#define V850E_UART_ASIM_CL_8	0x04 /* char len is 8 bits (otherwise, 7) */
-#define V850E_UART_ASIM_SL_2	0x02 /* 2 stop bits (otherwise, 1) */
-#define V850E_UART_ASIM_ISRM	0x01 /* generate INTSR interrupt on errors
-					(otherwise, generate INTSER) */
-
-/* UART serial interface status registers.  */
-#define V850E_UART_ASIS(n)	(*(volatile u8 *)V850E_UART_ASIS_ADDR(n))
-/* Control bits for status registers.  */
-#define V850E_UART_ASIS_PE	0x04 /* parity error */
-#define V850E_UART_ASIS_FE	0x02 /* framing error */
-#define V850E_UART_ASIS_OVE	0x01 /* overrun error */
-
-/* UART serial interface transmission status registers.  */
-#define V850E_UART_ASIF(n)	(*(volatile u8 *)V850E_UART_ASIF_ADDR(n))
-#define V850E_UART_ASIF_TXBF	0x02 /* transmit buffer flag (data in TXB) */
-#define V850E_UART_ASIF_TXSF	0x01 /* transmit shift flag (sending data) */
-
-/* UART receive buffer register.  */
-#define V850E_UART_RXB(n)	(*(volatile u8 *)V850E_UART_RXB_ADDR(n))
-
-/* UART transmit buffer register.  */
-#define V850E_UART_TXB(n)	(*(volatile u8 *)V850E_UART_TXB_ADDR(n))
-
-/* UART baud-rate generator control registers.  */
-#define V850E_UART_CKSR(n)	(*(volatile u8 *)V850E_UART_CKSR_ADDR(n))
-#define V850E_UART_CKSR_MAX	11
-#define V850E_UART_BRGC(n)	(*(volatile u8 *)V850E_UART_BRGC_ADDR(n))
-#define V850E_UART_BRGC_MIN	8
-
-
-#ifndef V850E_UART_CKSR_MAX_FREQ
-#define V850E_UART_CKSR_MAX_FREQ (25*1000*1000)
-#endif
-
-/* Calculate the minimum value for CKSR on this processor.  */
-static inline unsigned v850e_uart_cksr_min (void)
-{
-	int min = 0;
-	unsigned freq = V850E_UART_BASE_FREQ;
-	while (freq > V850E_UART_CKSR_MAX_FREQ) {
-		freq >>= 1;
-		min++;
-	}
-	return min;
-}
-
-
-/* Slightly abstract interface used by driver.  */
-
-
-/* Interrupts used by the UART.  */
-
-/* Received when the most recently transmitted character has been sent.  */
-#define V850E_UART_TX_IRQ(chan)		IRQ_INTST (chan)
-/* Received when a new character has been received.  */
-#define V850E_UART_RX_IRQ(chan)		IRQ_INTSR (chan)
-
-
-/* UART clock generator interface.  */
-
-/* This type encapsulates a particular uart frequency.  */
-typedef struct {
-	unsigned clk_divlog2;
-	unsigned brgen_count;
-} v850e_uart_speed_t;
-
-/* Calculate a uart speed from BAUD for this uart.  */
-static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
-{
-	v850e_uart_speed_t speed;
-
-	/* Calculate the log2 clock divider and baud-rate counter values
-	   (note that the UART divides the resulting clock by 2, so
-	   multiply BAUD by 2 here to compensate).  */
-	calc_counter_params (V850E_UART_BASE_FREQ, baud * 2,
-			     v850e_uart_cksr_min(),
-			     V850E_UART_CKSR_MAX, 8/*bits*/,
-			     &speed.clk_divlog2, &speed.brgen_count);
-
-	return speed;
-}
-
-/* Return the current speed of uart channel CHAN.  */
-static inline v850e_uart_speed_t v850e_uart_speed (unsigned chan)
-{
-	v850e_uart_speed_t speed;
-	speed.clk_divlog2 = V850E_UART_CKSR (chan);
-	speed.brgen_count = V850E_UART_BRGC (chan);
-	return speed;
-}
-
-/* Set the current speed of uart channel CHAN.  */
-static inline void v850e_uart_set_speed(unsigned chan,v850e_uart_speed_t speed)
-{
-	V850E_UART_CKSR (chan) = speed.clk_divlog2;
-	V850E_UART_BRGC (chan) = speed.brgen_count;
-}
-
-static inline int
-v850e_uart_speed_eq (v850e_uart_speed_t speed1, v850e_uart_speed_t speed2)
-{
-	return speed1.clk_divlog2 == speed2.clk_divlog2
-		&& speed1.brgen_count == speed2.brgen_count;
-}
-
-/* Minimum baud rate possible.  */
-#define v850e_uart_min_baud() \
-   ((V850E_UART_BASE_FREQ >> V850E_UART_CKSR_MAX) / (2 * 255) + 1)
-
-/* Maximum baud rate possible.  The error is quite high at max, though.  */
-#define v850e_uart_max_baud() \
-   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / (2 *V850E_UART_BRGC_MIN))
-
-/* The `maximum' clock rate the uart can used, which is wanted (though not
-   really used in any useful way) by the serial framework.  */
-#define v850e_uart_max_clock() \
-   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / 2)
-
-
-/* UART configuration interface.  */
-
-/* Type of the uart config register; must be a scalar.  */
-typedef u16 v850e_uart_config_t;
-
-/* The uart hardware config register for channel CHAN.  */
-#define V850E_UART_CONFIG(chan)		V850E_UART_ASIM (chan)
-
-/* This config bit set if the uart is enabled.  */
-#define V850E_UART_CONFIG_ENABLED	V850E_UART_ASIM_CAE
-/* If the uart _isn't_ enabled, store this value to it to do so.  */
-#define V850E_UART_CONFIG_INIT		V850E_UART_ASIM_CAE
-/* Store this config value to disable the uart channel completely.  */
-#define V850E_UART_CONFIG_FINI		0
-
-/* Setting/clearing these bits enable/disable TX/RX, respectively (but
-   otherwise generally leave things running).  */
-#define V850E_UART_CONFIG_RX_ENABLE	V850E_UART_ASIM_RXE
-#define V850E_UART_CONFIG_TX_ENABLE	V850E_UART_ASIM_TXE
-
-/* These masks define which config bits affect TX/RX modes, respectively.  */
-#define V850E_UART_CONFIG_RX_BITS \
-  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_ISRM)
-#define V850E_UART_CONFIG_TX_BITS \
-  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_SL_2)
-
-static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
-{
-	v850e_uart_config_t config = 0;
-
-	/* Figure out new configuration of control register.  */
-	if (cflags & CSTOPB)
-		/* Number of stop bits, 1 or 2.  */
-		config |= V850E_UART_ASIM_SL_2;
-	if ((cflags & CSIZE) == CS8)
-		/* Number of data bits, 7 or 8.  */
-		config |= V850E_UART_ASIM_CL_8;
-	if (! (cflags & PARENB))
-		/* No parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_NONE;
-	else if (cflags & PARODD)
-		/* Odd parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_ODD;
-	else
-		/* Even parity check/generation.  */
-		config |= V850E_UART_ASIM_PS_EVEN;
-	if (cflags & CREAD)
-		/* Reading enabled.  */
-		config |= V850E_UART_ASIM_RXE;
-
-	config |= V850E_UART_ASIM_CAE;
-	config |= V850E_UART_ASIM_TXE; /* Writing is always enabled.  */
-	config |= V850E_UART_ASIM_ISRM; /* Errors generate a read-irq.  */
-
-	return config;
-}
-
-/* This should delay as long as necessary for a recently written config
-   setting to settle, before we turn the uart back on.  */
-static inline void
-v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
-{
-	/* The UART may not be reset properly unless we wait at least 2
-	   `basic-clocks' until turning on the TXE/RXE bits again.
-	   A `basic clock' is the clock used by the baud-rate generator,
-	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
-	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
-	register unsigned count = 1 << speed.clk_divlog2;
-	while (--count != 0)
-		/* nothing */;
-}
-
-
-/* RX/TX interface.  */
-
-/* Return true if all characters awaiting transmission on uart channel N
-   have been transmitted.  */
-#define v850e_uart_xmit_done(n)						      \
-   (! (V850E_UART_ASIF(n) & V850E_UART_ASIF_TXBF))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_done(n)				      \
-   do { } while (! v850e_uart_xmit_done (n))
-
-/* Return true if uart channel N is ready to transmit a character.  */
-#define v850e_uart_xmit_ok(n)						      \
-   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_ok(n)					      \
-   do { } while (! v850e_uart_xmit_ok (n))
-
-/* Write character CH to uart channel CHAN.  */
-#define v850e_uart_putc(chan, ch)	(V850E_UART_TXB(chan) = (ch))
-
-/* Return latest character read on channel CHAN.  */
-#define v850e_uart_getc(chan)		V850E_UART_RXB (chan)
-
-/* Return bit-mask of uart error status.  */
-#define v850e_uart_err(chan)		V850E_UART_ASIS (chan)
-/* Various error bits set in the error result.  */
-#define V850E_UART_ERR_OVERRUN		V850E_UART_ASIS_OVE
-#define V850E_UART_ERR_FRAME		V850E_UART_ASIS_FE
-#define V850E_UART_ERR_PARITY		V850E_UART_ASIS_PE
-
-
-#endif /* __V850_V850E_UARTA_H__ */
diff --git a/include/asm-v850/v850e_uartb.h b/include/asm-v850/v850e_uartb.h
deleted file mode 100644
index 6d4767d5a835..000000000000
--- a/include/asm-v850/v850e_uartb.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * include/asm-v850/v850e_uartb.h -- V850E on-chip `UARTB' UART
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* The V850E UARTB is basically a superset of the original V850E UART, but
-   even where it's the same, the names and details have changed a bit.
-   It's similar enough to use the same driver (v850e_uart.c), but the
-   details have been abstracted slightly to do so.  */
-
-#ifndef __V850_V850E_UARTB_H__
-#define __V850_V850E_UARTB_H__
-
-
-/* Raw hardware interface.  */
-
-#define V850E_UARTB_BASE_ADDR(n)	(0xFFFFFA00 + 0x10 * (n))
-
-/* Addresses of specific UART control registers for channel N.  */
-#define V850E_UARTB_CTL0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x0)
-#define V850E_UARTB_CTL2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x2)
-#define V850E_UARTB_STR_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x4)
-#define V850E_UARTB_RX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x6)
-#define V850E_UARTB_RXAP_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x6)
-#define V850E_UARTB_TX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x8)
-#define V850E_UARTB_FIC0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xA)
-#define V850E_UARTB_FIC1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xB)
-#define V850E_UARTB_FIC2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xC)
-#define V850E_UARTB_FIS0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xE)
-#define V850E_UARTB_FIS1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xF)
-
-/* UARTB control register 0 (general config).  */
-#define V850E_UARTB_CTL0(n)	(*(volatile u8 *)V850E_UARTB_CTL0_ADDR(n))
-/* Control bits for config registers.  */
-#define V850E_UARTB_CTL0_PWR		0x80	/* clock enable */
-#define V850E_UARTB_CTL0_TXE		0x40	/* transmit enable */
-#define V850E_UARTB_CTL0_RXE		0x20	/* receive enable */
-#define V850E_UARTB_CTL0_DIR		0x10	/*  */
-#define V850E_UARTB_CTL0_PS1		0x08	/* parity */
-#define V850E_UARTB_CTL0_PS0		0x04	/* parity */
-#define V850E_UARTB_CTL0_CL		0x02	/* char len 1:8bit, 0:7bit */
-#define V850E_UARTB_CTL0_SL		0x01	/* stop bit 1:2bit, 0:1bit */
-#define V850E_UARTB_CTL0_PS_MASK	0x0C	/* mask covering parity bits */
-#define V850E_UARTB_CTL0_PS_NONE	0x00	/* no parity */
-#define V850E_UARTB_CTL0_PS_ZERO	0x04	/* zero parity */
-#define V850E_UARTB_CTL0_PS_ODD		0x08	/* odd parity */
-#define V850E_UARTB_CTL0_PS_EVEN	0x0C	/* even parity */
-#define V850E_UARTB_CTL0_CL_8		0x02	/* char len 1:8bit, 0:7bit */
-#define V850E_UARTB_CTL0_SL_2		0x01	/* stop bit 1:2bit, 0:1bit */
-
-/* UARTB control register 2 (clock divider).  */
-#define V850E_UARTB_CTL2(n)	(*(volatile u16 *)V850E_UARTB_CTL2_ADDR(n))
-#define V850E_UARTB_CTL2_MIN	4
-#define V850E_UARTB_CTL2_MAX	0xFFFF
-
-/* UARTB serial interface status register.  */
-#define V850E_UARTB_STR(n)	(*(volatile u8 *)V850E_UARTB_STR_ADDR(n))
-/* Control bits for status registers.  */
-#define V850E_UARTB_STR_TSF	0x80	/* UBTX or FIFO exist data  */
-#define V850E_UARTB_STR_OVF	0x08	/* overflow error */
-#define V850E_UARTB_STR_PE	0x04	/* parity error */
-#define V850E_UARTB_STR_FE	0x02	/* framing error */
-#define V850E_UARTB_STR_OVE	0x01	/* overrun error */
-
-/* UARTB receive data register.  */
-#define V850E_UARTB_RX(n)	(*(volatile u8 *)V850E_UARTB_RX_ADDR(n))
-#define V850E_UARTB_RXAP(n)	(*(volatile u16 *)V850E_UARTB_RXAP_ADDR(n))
-/* Control bits for status registers.  */
-#define V850E_UARTB_RXAP_PEF	0x0200 /* parity error */
-#define V850E_UARTB_RXAP_FEF	0x0100 /* framing error */
-
-/* UARTB transmit data register.  */
-#define V850E_UARTB_TX(n)	(*(volatile u8 *)V850E_UARTB_TX_ADDR(n))
-
-/* UARTB FIFO control register 0.  */
-#define V850E_UARTB_FIC0(n)	(*(volatile u8 *)V850E_UARTB_FIC0_ADDR(n))
-
-/* UARTB FIFO control register 1.  */
-#define V850E_UARTB_FIC1(n)	(*(volatile u8 *)V850E_UARTB_FIC1_ADDR(n))
-
-/* UARTB FIFO control register 2.  */
-#define V850E_UARTB_FIC2(n)	(*(volatile u16 *)V850E_UARTB_FIC2_ADDR(n))
-
-/* UARTB FIFO status register 0.  */
-#define V850E_UARTB_FIS0(n)	(*(volatile u8 *)V850E_UARTB_FIS0_ADDR(n))
-
-/* UARTB FIFO status register 1.  */
-#define V850E_UARTB_FIS1(n)	(*(volatile u8 *)V850E_UARTB_FIS1_ADDR(n))
-
-
-/* Slightly abstract interface used by driver.  */
-
-
-/* Interrupts used by the UART.  */
-
-/* Received when the most recently transmitted character has been sent.  */
-#define V850E_UART_TX_IRQ(chan)		IRQ_INTUBTIT (chan)
-/* Received when a new character has been received.  */
-#define V850E_UART_RX_IRQ(chan)		IRQ_INTUBTIR (chan)
-
-/* Use by serial driver for information purposes.  */
-#define V850E_UART_BASE_ADDR(chan)	V850E_UARTB_BASE_ADDR(chan)
-
-
-/* UART clock generator interface.  */
-
-/* This type encapsulates a particular uart frequency.  */
-typedef u16 v850e_uart_speed_t;
-
-/* Calculate a uart speed from BAUD for this uart.  */
-static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
-{
-	v850e_uart_speed_t speed;
-
-	/*
-	 * V850E/ME2 UARTB baud rate is determined by the value of UBCTL2
-	 * fx = V850E_UARTB_BASE_FREQ = CPU_CLOCK_FREQ/4
-	 * baud = fx / 2*speed   [ speed >= 4 ]
-	 */
-	speed = V850E_UARTB_CTL2_MIN;
-	while (((V850E_UARTB_BASE_FREQ / 2) / speed ) > baud)
-		speed++;
-
-	return speed;
-}
-
-/* Return the current speed of uart channel CHAN.  */
-#define v850e_uart_speed(chan)		    V850E_UARTB_CTL2 (chan)
-
-/* Set the current speed of uart channel CHAN.  */
-#define v850e_uart_set_speed(chan, speed)   (V850E_UARTB_CTL2 (chan) = (speed))
-
-/* Return true if SPEED1 and SPEED2 are the same.  */
-#define v850e_uart_speed_eq(speed1, speed2) ((speed1) == (speed2))
-
-/* Minimum baud rate possible.  */
-#define v850e_uart_min_baud() \
-   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MAX)
-
-/* Maximum baud rate possible.  The error is quite high at max, though.  */
-#define v850e_uart_max_baud() \
-   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MIN)
-
-/* The `maximum' clock rate the uart can used, which is wanted (though not
-   really used in any useful way) by the serial framework.  */
-#define v850e_uart_max_clock() \
-   (V850E_UARTB_BASE_FREQ / 2)
-
-
-/* UART configuration interface.  */
-
-/* Type of the uart config register; must be a scalar.  */
-typedef u16 v850e_uart_config_t;
-
-/* The uart hardware config register for channel CHAN.  */
-#define V850E_UART_CONFIG(chan)		V850E_UARTB_CTL0 (chan)
-
-/* This config bit set if the uart is enabled.  */
-#define V850E_UART_CONFIG_ENABLED	V850E_UARTB_CTL0_PWR
-/* If the uart _isn't_ enabled, store this value to it to do so.  */
-#define V850E_UART_CONFIG_INIT		V850E_UARTB_CTL0_PWR
-/* Store this config value to disable the uart channel completely.  */
-#define V850E_UART_CONFIG_FINI		0
-
-/* Setting/clearing these bits enable/disable TX/RX, respectively (but
-   otherwise generally leave things running).  */
-#define V850E_UART_CONFIG_RX_ENABLE	V850E_UARTB_CTL0_RXE
-#define V850E_UART_CONFIG_TX_ENABLE	V850E_UARTB_CTL0_TXE
-
-/* These masks define which config bits affect TX/RX modes, respectively.  */
-#define V850E_UART_CONFIG_RX_BITS \
-  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8)
-#define V850E_UART_CONFIG_TX_BITS \
-  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8 | V850E_UARTB_CTL0_SL_2)
-
-static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
-{
-	v850e_uart_config_t config = 0;
-
-	/* Figure out new configuration of control register.  */
-	if (cflags & CSTOPB)
-		/* Number of stop bits, 1 or 2.  */
-		config |= V850E_UARTB_CTL0_SL_2;
-	if ((cflags & CSIZE) == CS8)
-		/* Number of data bits, 7 or 8.  */
-		config |= V850E_UARTB_CTL0_CL_8;
-	if (! (cflags & PARENB))
-		/* No parity check/generation.  */
-		config |= V850E_UARTB_CTL0_PS_NONE;
-	else if (cflags & PARODD)
-		/* Odd parity check/generation.  */
-		config |= V850E_UARTB_CTL0_PS_ODD;
-	else
-		/* Even parity check/generation.  */
-		config |= V850E_UARTB_CTL0_PS_EVEN;
-	if (cflags & CREAD)
-		/* Reading enabled.  */
-		config |= V850E_UARTB_CTL0_RXE;
-
-	config |= V850E_UARTB_CTL0_PWR;
-	config |= V850E_UARTB_CTL0_TXE; /* Writing is always enabled.  */
-	config |= V850E_UARTB_CTL0_DIR; /* LSB first.  */
-
-	return config;
-}
-
-/* This should delay as long as necessary for a recently written config
-   setting to settle, before we turn the uart back on.  */
-static inline void
-v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
-{
-	/* The UART may not be reset properly unless we wait at least 2
-	   `basic-clocks' until turning on the TXE/RXE bits again.
-	   A `basic clock' is the clock used by the baud-rate generator,
-	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
-	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
-	register unsigned count = 1 << speed;
-	while (--count != 0)
-		/* nothing */;
-}
-
-
-/* RX/TX interface.  */
-
-/* Return true if all characters awaiting transmission on uart channel N
-   have been transmitted.  */
-#define v850e_uart_xmit_done(n)						      \
-   (! (V850E_UARTB_STR(n) & V850E_UARTB_STR_TSF))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_done(n)				      \
-   do { } while (! v850e_uart_xmit_done (n))
-
-/* Return true if uart channel N is ready to transmit a character.  */
-#define v850e_uart_xmit_ok(n)						      \
-   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
-/* Wait for this to be true.  */
-#define v850e_uart_wait_for_xmit_ok(n)					      \
-   do { } while (! v850e_uart_xmit_ok (n))
-
-/* Write character CH to uart channel CHAN.  */
-#define v850e_uart_putc(chan, ch)	(V850E_UARTB_TX(chan) = (ch))
-
-/* Return latest character read on channel CHAN.  */
-#define v850e_uart_getc(chan)		V850E_UARTB_RX (chan)
-
-/* Return bit-mask of uart error status.  */
-#define v850e_uart_err(chan)		V850E_UARTB_STR (chan)
-/* Various error bits set in the error result.  */
-#define V850E_UART_ERR_OVERRUN		V850E_UARTB_STR_OVE
-#define V850E_UART_ERR_FRAME		V850E_UARTB_STR_FE
-#define V850E_UART_ERR_PARITY		V850E_UARTB_STR_PE
-
-
-#endif /* __V850_V850E_UARTB_H__ */
diff --git a/include/asm-v850/v850e_utils.h b/include/asm-v850/v850e_utils.h
deleted file mode 100644
index 52eb72822d3d..000000000000
--- a/include/asm-v850/v850e_utils.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- *	V850E CPUs
- *
- *  Copyright (C) 2001,03  NEC Electronics Corporation
- *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_UTILS_H__
-#define __V850_V850E_UTILS_H__
-
-/* Calculate counter clock-divider and count values to attain the
-   desired frequency RATE from the base frequency BASE_FREQ.  The
-   counter is expected to have a clock-divider, which can divide the
-   system cpu clock by a power of two value from MIN_DIVLOG2 to
-   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
-   counts up and resets whenever it's equal to the compare register,
-   generating an interrupt or whatever when it does so).  The returned
-   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
-   -- the counter compare value to use.  Returns true if it was possible
-   to find a reasonable value, otherwise false (and the other return
-   values will be set to be as good as possible).  */
-extern int calc_counter_params (unsigned long base_freq,
-				unsigned long rate,
-				unsigned min_divlog2, unsigned max_divlog2,
-				unsigned counter_size,
-				unsigned *divlog2, unsigned *count);
-
-#endif /* __V850_V850E_UTILS_H__ */
diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
index 1e3554596f72..4a8e80cdcfa5 100644
--- a/include/asm-x86/Kbuild
+++ b/include/asm-x86/Kbuild
@@ -3,7 +3,6 @@ include include/asm-generic/Kbuild.asm
 header-y += boot.h
 header-y += bootparam.h
 header-y += debugreg.h
-header-y += kvm.h
 header-y += ldt.h
 header-y += msr-index.h
 header-y += prctl.h
@@ -19,7 +18,6 @@ unifdef-y += msr.h
 unifdef-y += mtrr.h
 unifdef-y += posix_types_32.h
 unifdef-y += posix_types_64.h
-unifdef-y += ptrace.h
 unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
 unifdef-y += vm86.h
diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h
index 7bfcb47cc452..22aa58ca1991 100644
--- a/include/asm-x86/amd_iommu_types.h
+++ b/include/asm-x86/amd_iommu_types.h
@@ -27,13 +27,12 @@
 /*
  * some size calculation constants
  */
-#define DEV_TABLE_ENTRY_SIZE		256
+#define DEV_TABLE_ENTRY_SIZE		32
 #define ALIAS_TABLE_ENTRY_SIZE		2
 #define RLOOKUP_TABLE_ENTRY_SIZE	(sizeof(void *))
 
 /* helper macros */
 #define LOW_U32(x) ((x) & ((1ULL << 32)-1))
-#define HIGH_U32(x) (LOW_U32((x) >> 32))
 
 /* Length of the MMIO region for the AMD IOMMU */
 #define MMIO_REGION_LENGTH       0x4000
@@ -158,78 +157,170 @@
 
 #define MAX_DOMAIN_ID 65536
 
+/*
+ * This structure contains generic data for  IOMMU protection domains
+ * independent of their use.
+ */
 struct protection_domain {
-	spinlock_t lock;
-	u16 id;
-	int mode;
-	u64 *pt_root;
-	void *priv;
+	spinlock_t lock; /* mostly used to lock the page table*/
+	u16 id;		 /* the domain id written to the device table */
+	int mode;	 /* paging mode (0-6 levels) */
+	u64 *pt_root;	 /* page table root pointer */
+	void *priv;	 /* private data */
 };
 
+/*
+ * Data container for a dma_ops specific protection domain
+ */
 struct dma_ops_domain {
 	struct list_head list;
+
+	/* generic protection domain information */
 	struct protection_domain domain;
+
+	/* size of the aperture for the mappings */
 	unsigned long aperture_size;
+
+	/* address we start to search for free addresses */
 	unsigned long next_bit;
+
+	/* address allocation bitmap */
 	unsigned long *bitmap;
+
+	/*
+	 * Array of PTE pages for the aperture. In this array we save all the
+	 * leaf pages of the domain page table used for the aperture. This way
+	 * we don't need to walk the page table to find a specific PTE. We can
+	 * just calculate its address in constant time.
+	 */
 	u64 **pte_pages;
 };
 
+/*
+ * Structure where we save information about one hardware AMD IOMMU in the
+ * system.
+ */
 struct amd_iommu {
 	struct list_head list;
+
+	/* locks the accesses to the hardware */
 	spinlock_t lock;
 
+	/* device id of this IOMMU */
 	u16 devid;
+	/*
+	 * Capability pointer. There could be more than one IOMMU per PCI
+	 * device function if there are more than one AMD IOMMU capability
+	 * pointers.
+	 */
 	u16 cap_ptr;
 
+	/* physical address of MMIO space */
 	u64 mmio_phys;
+	/* virtual address of MMIO space */
 	u8 *mmio_base;
+
+	/* capabilities of that IOMMU read from ACPI */
 	u32 cap;
+
+	/* first device this IOMMU handles. read from PCI */
 	u16 first_device;
+	/* last device this IOMMU handles. read from PCI */
 	u16 last_device;
+
+	/* start of exclusion range of that IOMMU */
 	u64 exclusion_start;
+	/* length of exclusion range of that IOMMU */
 	u64 exclusion_length;
 
+	/* command buffer virtual address */
 	u8 *cmd_buf;
+	/* size of command buffer */
 	u32 cmd_buf_size;
 
+	/* if one, we need to send a completion wait command */
 	int need_sync;
 
+	/* default dma_ops domain for that IOMMU */
 	struct dma_ops_domain *default_dom;
 };
 
+/*
+ * List with all IOMMUs in the system. This list is not locked because it is
+ * only written and read at driver initialization or suspend time
+ */
 extern struct list_head amd_iommu_list;
 
+/*
+ * Structure defining one entry in the device table
+ */
 struct dev_table_entry {
 	u32 data[8];
 };
 
+/*
+ * One entry for unity mappings parsed out of the ACPI table.
+ */
 struct unity_map_entry {
 	struct list_head list;
+
+	/* starting device id this entry is used for (including) */
 	u16 devid_start;
+	/* end device id this entry is used for (including) */
 	u16 devid_end;
+
+	/* start address to unity map (including) */
 	u64 address_start;
+	/* end address to unity map (including) */
 	u64 address_end;
+
+	/* required protection */
 	int prot;
 };
 
+/*
+ * List of all unity mappings. It is not locked because as runtime it is only
+ * read. It is created at ACPI table parsing time.
+ */
 extern struct list_head amd_iommu_unity_map;
 
-/* data structures for device handling */
+/*
+ * Data structures for device handling
+ */
+
+/*
+ * Device table used by hardware. Read and write accesses by software are
+ * locked with the amd_iommu_pd_table lock.
+ */
 extern struct dev_table_entry *amd_iommu_dev_table;
+
+/*
+ * Alias table to find requestor ids to device ids. Not locked because only
+ * read on runtime.
+ */
 extern u16 *amd_iommu_alias_table;
+
+/*
+ * Reverse lookup table to find the IOMMU which translates a specific device.
+ */
 extern struct amd_iommu **amd_iommu_rlookup_table;
 
+/* size of the dma_ops aperture as power of 2 */
 extern unsigned amd_iommu_aperture_order;
 
+/* largest PCI device id we expect translation requests for */
 extern u16 amd_iommu_last_bdf;
 
 /* data structures for protection domain handling */
 extern struct protection_domain **amd_iommu_pd_table;
+
+/* allocation bitmap for domain ids */
 extern unsigned long *amd_iommu_pd_alloc_bitmap;
 
+/* will be 1 if device isolation is enabled */
 extern int amd_iommu_isolate;
 
+/* takes a PCI device id and prints it out in a readable form */
 static inline void print_devid(u16 devid, int nl)
 {
 	int bus = devid >> 8;
@@ -241,4 +332,11 @@ static inline void print_devid(u16 devid, int nl)
 		printk("\n");
 }
 
+/* takes bus and device/function and returns the device id
+ * FIXME: should that be in generic PCI code? */
+static inline u16 calc_devid(u8 bus, u8 devfn)
+{
+	return (((u16)bus) << 8) | devfn;
+}
+
 #endif
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
index 4e2c1e517f06..133c998161ca 100644
--- a/include/asm-x86/apic.h
+++ b/include/asm-x86/apic.h
@@ -3,6 +3,8 @@
 
 #include <linux/pm.h>
 #include <linux/delay.h>
+
+#include <asm/alternative.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/processor.h>
@@ -10,8 +12,6 @@
 
 #define ARCH_APICTIMER_STOPS_ON_C3	1
 
-#define Dprintk(x...)
-
 /*
  * Debugging macros
  */
@@ -35,7 +35,7 @@ extern void generic_apic_probe(void);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 
-extern int apic_verbosity;
+extern unsigned int apic_verbosity;
 extern int local_apic_timer_c2_ok;
 
 extern int ioapic_force;
@@ -48,7 +48,6 @@ extern int disable_apic;
 #include <asm/paravirt.h>
 #else
 #define apic_write native_apic_write
-#define apic_write_atomic native_apic_write_atomic
 #define apic_read native_apic_read
 #define setup_boot_clock setup_boot_APIC_clock
 #define setup_secondary_clock setup_secondary_APIC_clock
@@ -58,12 +57,11 @@ extern int is_vsmp_box(void);
 
 static inline void native_apic_write(unsigned long reg, u32 v)
 {
-	*((volatile u32 *)(APIC_BASE + reg)) = v;
-}
+	volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);
 
-static inline void native_apic_write_atomic(unsigned long reg, u32 v)
-{
-	(void)xchg((u32 *)(APIC_BASE + reg), v);
+	alternative_io("movl %0, %1", "xchgl %0, %1", X86_FEATURE_11AP,
+		       ASM_OUTPUT2("=r" (v), "=m" (*addr)),
+		       ASM_OUTPUT2("0" (v), "m" (*addr)));
 }
 
 static inline u32 native_apic_read(unsigned long reg)
@@ -75,16 +73,6 @@ extern void apic_wait_icr_idle(void);
 extern u32 safe_apic_wait_icr_idle(void);
 extern int get_physical_broadcast(void);
 
-#ifdef CONFIG_X86_GOOD_APIC
-# define FORCE_READ_AROUND_WRITE 0
-# define apic_read_around(x)
-# define apic_write_around(x, y) apic_write((x), (y))
-#else
-# define FORCE_READ_AROUND_WRITE 1
-# define apic_read_around(x) apic_read(x)
-# define apic_write_around(x, y) apic_write_atomic((x), (y))
-#endif
-
 static inline void ack_APIC_irq(void)
 {
 	/*
@@ -95,7 +83,7 @@ static inline void ack_APIC_irq(void)
 	 */
 
 	/* Docs say use 0 for future compatibility */
-	apic_write_around(APIC_EOI, 0);
+	apic_write(APIC_EOI, 0);
 }
 
 extern int lapic_get_maxlvt(void);
diff --git a/include/asm-x86/arch_hooks.h b/include/asm-x86/arch_hooks.h
index 768aee8a04ef..8411750ceb63 100644
--- a/include/asm-x86/arch_hooks.h
+++ b/include/asm-x86/arch_hooks.h
@@ -21,6 +21,7 @@ extern void intr_init_hook(void);
 extern void pre_intr_init_hook(void);
 extern void pre_setup_arch_hook(void);
 extern void trap_init_hook(void);
+extern void pre_time_init_hook(void);
 extern void time_init_hook(void);
 extern void mca_nmi_hook(void);
 
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
index 96b1829cea15..cfb2b64f76e7 100644
--- a/include/asm-x86/bitops.h
+++ b/include/asm-x86/bitops.h
@@ -356,7 +356,7 @@ static inline unsigned long ffz(unsigned long word)
  * __fls: find last set bit in word
  * @word: The word to search
  *
- * Undefined if no zero exists, so code should check against ~0UL first.
+ * Undefined if no set bit exists, so code should check against 0 first.
  */
 static inline unsigned long __fls(unsigned long word)
 {
diff --git a/include/asm-x86/calling.h b/include/asm-x86/calling.h
index f13e62e2cb3e..2bc162e0ec6e 100644
--- a/include/asm-x86/calling.h
+++ b/include/asm-x86/calling.h
@@ -104,7 +104,7 @@
 	.endif
 	.endm
 
-	.macro LOAD_ARGS offset
+	.macro LOAD_ARGS offset, skiprax=0
 	movq \offset(%rsp),    %r11
 	movq \offset+8(%rsp),  %r10
 	movq \offset+16(%rsp), %r9
@@ -113,7 +113,10 @@
 	movq \offset+48(%rsp), %rdx
 	movq \offset+56(%rsp), %rsi
 	movq \offset+64(%rsp), %rdi
+	.if \skiprax
+	.else
 	movq \offset+72(%rsp), %rax
+	.endif
 	.endm
 
 #define REST_SKIP	6*8
@@ -165,4 +168,3 @@
 	.macro icebp
 	.byte 0xf1
 	.endm
-
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 75ef959db329..2f5a792b0acc 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -79,6 +79,7 @@
 #define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well on this CPU */
 #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
+#define X86_FEATURE_11AP	(3*32+19)  /* Bad local APIC aka 11AP */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
diff --git a/include/asm-x86/device.h b/include/asm-x86/device.h
index 87a715367a1b..3c034f48fdb0 100644
--- a/include/asm-x86/device.h
+++ b/include/asm-x86/device.h
@@ -5,6 +5,9 @@ struct dev_archdata {
 #ifdef CONFIG_ACPI
 	void	*acpi_handle;
 #endif
+#ifdef CONFIG_X86_64
+struct dma_mapping_ops *dma_ops;
+#endif
 #ifdef CONFIG_DMAR
 	void *iommu; /* hook for IOMMU specific extension */
 #endif
diff --git a/include/asm-x86/dma-mapping.h b/include/asm-x86/dma-mapping.h
index a1a4dc7fe6ec..ad9cd6d49bfc 100644
--- a/include/asm-x86/dma-mapping.h
+++ b/include/asm-x86/dma-mapping.h
@@ -14,11 +14,11 @@ extern dma_addr_t bad_dma_address;
 extern int iommu_merge;
 extern struct device fallback_dev;
 extern int panic_on_overflow;
-extern int forbid_dac;
 extern int force_iommu;
 
 struct dma_mapping_ops {
-	int             (*mapping_error)(dma_addr_t dma_addr);
+	int             (*mapping_error)(struct device *dev,
+					 dma_addr_t dma_addr);
 	void*           (*alloc_coherent)(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, gfp_t gfp);
 	void            (*free_coherent)(struct device *dev, size_t size,
@@ -57,14 +57,32 @@ struct dma_mapping_ops {
 	int		is_phys;
 };
 
-extern const struct dma_mapping_ops *dma_ops;
+extern struct dma_mapping_ops *dma_ops;
 
-static inline int dma_mapping_error(dma_addr_t dma_addr)
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 {
-	if (dma_ops->mapping_error)
-		return dma_ops->mapping_error(dma_addr);
+#ifdef CONFIG_X86_32
+	return dma_ops;
+#else
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return dma_ops;
+	else
+		return dev->archdata.dma_ops;
+#endif
+}
+
+/* Make sure we keep the same behaviour */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_X86_32
+	return 0;
+#else
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
 
 	return (dma_addr == bad_dma_address);
+#endif
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
@@ -84,44 +102,53 @@ static inline dma_addr_t
 dma_map_single(struct device *hwdev, void *ptr, size_t size,
 	       int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
+	return ops->map_single(hwdev, virt_to_phys(ptr), size, direction);
 }
 
 static inline void
 dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size,
 		 int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, addr, size, direction);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, addr, size, direction);
 }
 
 static inline int
 dma_map_sg(struct device *hwdev, struct scatterlist *sg,
 	   int nents, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_sg(hwdev, sg, nents, direction);
+	return ops->map_sg(hwdev, sg, nents, direction);
 }
 
 static inline void
 dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
 	     int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->unmap_sg)
-		dma_ops->unmap_sg(hwdev, sg, nents, direction);
+	if (ops->unmap_sg)
+		ops->unmap_sg(hwdev, sg, nents, direction);
 }
 
 static inline void
 dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
 			size_t size, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_for_cpu)
-		dma_ops->sync_single_for_cpu(hwdev, dma_handle, size,
-					     direction);
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(hwdev, dma_handle, size, direction);
 	flush_write_buffers();
 }
 
@@ -129,10 +156,11 @@ static inline void
 dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle,
 			   size_t size, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_for_device)
-		dma_ops->sync_single_for_device(hwdev, dma_handle, size,
-						direction);
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(hwdev, dma_handle, size, direction);
 	flush_write_buffers();
 }
 
@@ -140,11 +168,12 @@ static inline void
 dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle,
 			      unsigned long offset, size_t size, int direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_range_for_cpu)
-		dma_ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
-						   size, direction);
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
 
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_cpu)
+		ops->sync_single_range_for_cpu(hwdev, dma_handle, offset,
+					       size, direction);
 	flush_write_buffers();
 }
 
@@ -153,11 +182,12 @@ dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle,
 				 unsigned long offset, size_t size,
 				 int direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_single_range_for_device)
-		dma_ops->sync_single_range_for_device(hwdev, dma_handle,
-						      offset, size, direction);
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
 
+	BUG_ON(!valid_dma_direction(direction));
+	if (ops->sync_single_range_for_device)
+		ops->sync_single_range_for_device(hwdev, dma_handle,
+						  offset, size, direction);
 	flush_write_buffers();
 }
 
@@ -165,9 +195,11 @@ static inline void
 dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
 		    int nelems, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_sg_for_cpu)
-		dma_ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
+	if (ops->sync_sg_for_cpu)
+		ops->sync_sg_for_cpu(hwdev, sg, nelems, direction);
 	flush_write_buffers();
 }
 
@@ -175,9 +207,11 @@ static inline void
 dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
 		       int nelems, int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(hwdev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	if (dma_ops->sync_sg_for_device)
-		dma_ops->sync_sg_for_device(hwdev, sg, nelems, direction);
+	if (ops->sync_sg_for_device)
+		ops->sync_sg_for_device(hwdev, sg, nelems, direction);
 
 	flush_write_buffers();
 }
@@ -186,9 +220,11 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 				      size_t offset, size_t size,
 				      int direction)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	BUG_ON(!valid_dma_direction(direction));
-	return dma_ops->map_single(dev, page_to_phys(page)+offset,
-				   size, direction);
+	return ops->map_single(dev, page_to_phys(page) + offset,
+			       size, direction);
 }
 
 static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
@@ -213,25 +249,5 @@ static inline int dma_get_cache_alignment(void)
 
 #define dma_is_consistent(d, h)	(1)
 
-#ifdef CONFIG_X86_32
-#  define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-			    dma_addr_t device_addr, size_t size, int flags);
-
-extern void
-dma_release_declared_memory(struct device *dev);
-
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
-				  dma_addr_t device_addr, size_t size);
-#endif /* CONFIG_X86_32 */
+#include <asm-generic/dma-coherent.h>
 #endif
diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h
index 06633b01dd5b..16a31e2c7c57 100644
--- a/include/asm-x86/e820.h
+++ b/include/asm-x86/e820.h
@@ -90,6 +90,14 @@ static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
 }
 #endif
 
+#ifdef CONFIG_MEMTEST
+extern void early_memtest(unsigned long start, unsigned long end);
+#else
+static inline void early_memtest(unsigned long start, unsigned long end)
+{
+}
+#endif
+
 extern unsigned long end_user_pfn;
 
 extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h
index aae2f0501a40..f1ac2b2167d7 100644
--- a/include/asm-x86/fixmap_32.h
+++ b/include/asm-x86/fixmap_32.h
@@ -90,13 +90,13 @@ enum fixed_addresses {
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
 	 *
-	 * We round it up to the next 512 pages boundary so that we
+	 * We round it up to the next 256 pages boundary so that we
 	 * can have a single pgd entry and a single pte table:
 	 */
 #define NR_FIX_BTMAPS		64
 #define FIX_BTMAPS_NESTING	4
-	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 512 -
-			(__end_of_permanent_fixed_addresses & 511),
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
+			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1,
 	FIX_WP_TEST,
 #ifdef CONFIG_ACPI
diff --git a/include/asm-x86/ftrace.h b/include/asm-x86/ftrace.h
index c184441133f2..5c68b32ee1c8 100644
--- a/include/asm-x86/ftrace.h
+++ b/include/asm-x86/ftrace.h
@@ -1,5 +1,5 @@
 #ifndef _ASM_X86_FTRACE
-#define _ASM_SPARC64_FTRACE
+#define _ASM_X86_FTRACE
 
 #ifdef CONFIG_FTRACE
 #define MCOUNT_ADDR		((long)(mcount))
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
index 33b9aeeb35a2..3f62a83887f3 100644
--- a/include/asm-x86/gart.h
+++ b/include/asm-x86/gart.h
@@ -2,7 +2,6 @@
 #define _ASM_X8664_GART_H 1
 
 #include <asm/e820.h>
-#include <asm/iommu.h>
 
 extern void set_up_gart_resume(u32, u32);
 
diff --git a/include/asm-x86/gpio.h b/include/asm-x86/gpio.h
index ff87fca0caf9..c4c91b37c104 100644
--- a/include/asm-x86/gpio.h
+++ b/include/asm-x86/gpio.h
@@ -1,6 +1,56 @@
+/*
+ * Generic GPIO API implementation for x86.
+ *
+ * Derived from the generic GPIO API for powerpc:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
 #ifndef _ASM_I386_GPIO_H
 #define _ASM_I386_GPIO_H
 
-#include <gpio.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
 
 #endif /* _ASM_I386_GPIO_H */
diff --git a/include/asm-x86/hugetlb.h b/include/asm-x86/hugetlb.h
index 14171a4924f6..439a9acc132d 100644
--- a/include/asm-x86/hugetlb.h
+++ b/include/asm-x86/hugetlb.h
@@ -14,11 +14,13 @@ static inline int is_hugepage_only_range(struct mm_struct *mm,
  * If the arch doesn't supply something else, assume that hugepage
  * size aligned regions are ok without further preparation.
  */
-static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
-	if (len & ~HPAGE_MASK)
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
-	if (addr & ~HPAGE_MASK)
+	if (addr & ~huge_page_mask(h))
 		return -EINVAL;
 	return 0;
 }
@@ -26,7 +28,7 @@ static inline int prepare_hugepage_range(unsigned long addr, unsigned long len)
 static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
 }
 
-static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 					  unsigned long addr, unsigned long end,
 					  unsigned long floor,
 					  unsigned long ceiling)
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 37672f79dcc8..96fa8449ff11 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -137,60 +137,6 @@ static inline void __save_init_fpu(struct task_struct *tsk)
 	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
-/*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err = 0;
-
-	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
-			sizeof(tsk->thread.xstate->fxsave));
-
-	if ((unsigned long)buf % 16)
-		printk("save_i387: bad fpstate %p\n", buf);
-
-	if (!used_math())
-		return 0;
-	clear_used_math(); /* trigger finit */
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		err = save_i387_checking((struct i387_fxsave_struct __user *)
-					 buf);
-		if (err)
-			return err;
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
-	} else {
-		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
-				   sizeof(struct i387_fxsave_struct)))
-			return -1;
-	}
-	return 1;
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err;
-
-	if (!used_math()) {
-		err = init_fpu(tsk);
-		if (err)
-			return err;
-	}
-
-	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
-		clts();
-		task_thread_info(current)->status |= TS_USEDFPU;
-	}
-	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
-}
-
 #else  /* CONFIG_X86_32 */
 
 extern void finit(void);
diff --git a/include/asm-x86/ide.h b/include/asm-x86/ide.h
deleted file mode 100644
index cf9c98e5bdb5..000000000000
--- a/include/asm-x86/ide.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the i386 architecture specific IDE code.
- */
-
-#ifndef __ASMi386_IDE_H
-#define __ASMi386_IDE_H
-
-#ifdef __KERNEL__
-
-
-#ifndef MAX_HWIFS
-# ifdef CONFIG_BLK_DEV_IDEPCI
-#define MAX_HWIFS	10
-# else
-#define MAX_HWIFS	6
-# endif
-#endif
-
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	switch (base) {
-		case 0x1f0: return 14;
-		case 0x170: return 15;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		case 0x1e0: return 8;
-		case 0x160: return 12;
-		default:
-			return 0;
-	}
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	/*
-	 *	If PCI is present then it is not safe to poke around
-	 *	the other legacy IDE ports. Only 0x1f0 and 0x170 are
-	 *	defined compatibility mode ports for PCI. A user can 
-	 *	override this using ide= but we must default safe.
-	 */
-	if (no_pci_devices()) {
-		switch(index) {
-			case 2: return 0x1e8;
-			case 3: return 0x168;
-			case 4: return 0x1e0;
-			case 5: return 0x160;
-		}
-	}
-	switch (index) {
-		case 0:	return 0x1f0;
-		case 1:	return 0x170;
-		default:
-			return 0;
-	}
-}
-
-#include <asm-generic/ide_iops.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMi386_IDE_H */
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index 4df44ed54077..e876d89ac156 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -110,6 +110,8 @@ static inline void *phys_to_virt(unsigned long address)
  */
 extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
 extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
 
 /*
  * The default ioremap() behavior is non-cached:
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
index ddd8058a5026..22995c5c5adc 100644
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -175,6 +175,8 @@ extern void early_iounmap(void *addr, unsigned long size);
  */
 extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
 extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
 
 /*
  * The default ioremap() behavior is non-cached:
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index 068c9a40aa5b..5f888cc5be49 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -3,9 +3,12 @@
 
 extern void pci_iommu_shutdown(void);
 extern void no_iommu_init(void);
+extern struct dma_mapping_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 
+extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
+
 #ifdef CONFIG_GART_IOMMU
 extern int gart_iommu_aperture;
 extern int gart_iommu_aperture_allowed;
@@ -25,10 +28,18 @@ extern void gart_iommu_hole_init(void);
 static inline void early_gart_iommu_check(void)
 {
 }
-
+static inline void gart_iommu_init(void)
+{
+}
 static inline void gart_iommu_shutdown(void)
 {
 }
+static inline void gart_parse_options(char *options)
+{
+}
+static inline void gart_iommu_hole_init(void)
+{
+}
 #endif
 
 #endif
diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h
index 196d63c28aa4..bb1c09f7a76c 100644
--- a/include/asm-x86/ipi.h
+++ b/include/asm-x86/ipi.h
@@ -122,7 +122,7 @@ static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
 	 * - mbligh
 	 */
 	local_irq_save(flags);
-	for_each_cpu_mask(query_cpu, mask) {
+	for_each_cpu_mask_nr(query_cpu, mask) {
 		__send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu),
 				      vector, APIC_DEST_PHYSICAL);
 	}
diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h
index 8f855a15f64d..c0e52a14fd4d 100644
--- a/include/asm-x86/kexec.h
+++ b/include/asm-x86/kexec.h
@@ -10,14 +10,15 @@
 # define VA_PTE_0		5
 # define PA_PTE_1		6
 # define VA_PTE_1		7
+# define PA_SWAP_PAGE		8
 # ifdef CONFIG_X86_PAE
-#  define PA_PMD_0		8
-#  define VA_PMD_0		9
-#  define PA_PMD_1		10
-#  define VA_PMD_1		11
-#  define PAGES_NR		12
+#  define PA_PMD_0		9
+#  define VA_PMD_0		10
+#  define PA_PMD_1		11
+#  define VA_PMD_1		12
+#  define PAGES_NR		13
 # else
-#  define PAGES_NR		8
+#  define PAGES_NR		9
 # endif
 #else
 # define PA_CONTROL_PAGE	0
@@ -152,11 +153,12 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage NORET_TYPE void
+asmlinkage unsigned long
 relocate_kernel(unsigned long indirection_page,
 		unsigned long control_page,
 		unsigned long start_address,
-		unsigned int has_pae) ATTRIB_NORET;
+		unsigned int has_pae,
+		unsigned int preserve_context);
 #else
 NORET_TYPE void
 relocate_kernel(unsigned long indirection_page,
diff --git a/include/asm-x86/kvm.h b/include/asm-x86/kvm.h
index 80eefef2cc76..6f1840812e59 100644
--- a/include/asm-x86/kvm.h
+++ b/include/asm-x86/kvm.h
@@ -228,5 +228,6 @@ struct kvm_pit_state {
 #define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
 #define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
 #define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
+#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
 
 #endif
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 844f2a89afbc..0f3c53114614 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/mmu_notifier.h>
 
 #include <linux/kvm.h>
 #include <linux/kvm_para.h>
@@ -27,6 +28,7 @@
 #define KVM_PRIVATE_MEM_SLOTS 4
 
 #define KVM_PIO_PAGE_OFFSET 1
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 2
 
 #define CR3_PAE_RESERVED_BITS ((X86_CR3_PWT | X86_CR3_PCD) - 1)
 #define CR3_NONPAE_RESERVED_BITS ((PAGE_SIZE-1) & ~(X86_CR3_PWT | X86_CR3_PCD))
@@ -79,6 +81,7 @@
 #define KVM_MIN_FREE_MMU_PAGES 5
 #define KVM_REFILL_PAGES 25
 #define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_NR_VAR_MTRR 8
 
 extern spinlock_t kvm_lock;
 extern struct list_head vm_list;
@@ -109,12 +112,12 @@ enum {
 };
 
 enum {
+	VCPU_SREG_ES,
 	VCPU_SREG_CS,
+	VCPU_SREG_SS,
 	VCPU_SREG_DS,
-	VCPU_SREG_ES,
 	VCPU_SREG_FS,
 	VCPU_SREG_GS,
-	VCPU_SREG_SS,
 	VCPU_SREG_TR,
 	VCPU_SREG_LDTR,
 };
@@ -243,11 +246,13 @@ struct kvm_vcpu_arch {
 	gfn_t last_pt_write_gfn;
 	int   last_pt_write_count;
 	u64  *last_pte_updated;
+	gfn_t last_pte_gfn;
 
 	struct {
 		gfn_t gfn;	/* presumed gfn during guest pte update */
 		pfn_t pfn;	/* pfn corresponding to that gfn */
 		int largepage;
+		unsigned long mmu_seq;
 	} update_pte;
 
 	struct i387_fxsave_struct host_fx_image;
@@ -287,6 +292,10 @@ struct kvm_vcpu_arch {
 	unsigned int hv_clock_tsc_khz;
 	unsigned int time_offset;
 	struct page *time_page;
+
+	bool nmi_pending;
+
+	u64 mtrr[0x100];
 };
 
 struct kvm_mem_alias {
@@ -344,6 +353,7 @@ struct kvm_vcpu_stat {
 	u32 mmio_exits;
 	u32 signal_exits;
 	u32 irq_window_exits;
+	u32 nmi_window_exits;
 	u32 halt_exits;
 	u32 halt_wakeup;
 	u32 request_irq_exits;
@@ -379,7 +389,6 @@ struct kvm_x86_ops {
 	void (*prepare_guest_switch)(struct kvm_vcpu *vcpu);
 	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
 	void (*vcpu_put)(struct kvm_vcpu *vcpu);
-	void (*vcpu_decache)(struct kvm_vcpu *vcpu);
 
 	int (*set_guest_debug)(struct kvm_vcpu *vcpu,
 			       struct kvm_debug_guest *dbg);
@@ -497,6 +506,10 @@ int emulator_get_dr(struct x86_emulate_ctxt *ctxt, int dr,
 int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
 		    unsigned long value);
 
+void kvm_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
+				int type_bits, int seg);
+
 int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason);
 
 void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
@@ -515,6 +528,8 @@ void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
 			   u32 error_code);
 
+void kvm_inject_nmi(struct kvm_vcpu *vcpu);
+
 void fx_init(struct kvm_vcpu *vcpu);
 
 int emulator_read_std(unsigned long addr,
@@ -543,6 +558,7 @@ int kvm_fix_hypercall(struct kvm_vcpu *vcpu);
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code);
 
 void kvm_enable_tdp(void);
+void kvm_disable_tdp(void);
 
 int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
 int complete_pio(struct kvm_vcpu *vcpu);
@@ -554,55 +570,53 @@ static inline struct kvm_mmu_page *page_header(hpa_t shadow_page)
 	return (struct kvm_mmu_page *)page_private(page);
 }
 
-static inline u16 read_fs(void)
+static inline u16 kvm_read_fs(void)
 {
 	u16 seg;
 	asm("mov %%fs, %0" : "=g"(seg));
 	return seg;
 }
 
-static inline u16 read_gs(void)
+static inline u16 kvm_read_gs(void)
 {
 	u16 seg;
 	asm("mov %%gs, %0" : "=g"(seg));
 	return seg;
 }
 
-static inline u16 read_ldt(void)
+static inline u16 kvm_read_ldt(void)
 {
 	u16 ldt;
 	asm("sldt %0" : "=g"(ldt));
 	return ldt;
 }
 
-static inline void load_fs(u16 sel)
+static inline void kvm_load_fs(u16 sel)
 {
 	asm("mov %0, %%fs" : : "rm"(sel));
 }
 
-static inline void load_gs(u16 sel)
+static inline void kvm_load_gs(u16 sel)
 {
 	asm("mov %0, %%gs" : : "rm"(sel));
 }
 
-#ifndef load_ldt
-static inline void load_ldt(u16 sel)
+static inline void kvm_load_ldt(u16 sel)
 {
 	asm("lldt %0" : : "rm"(sel));
 }
-#endif
 
-static inline void get_idt(struct descriptor_table *table)
+static inline void kvm_get_idt(struct descriptor_table *table)
 {
 	asm("sidt %0" : "=m"(*table));
 }
 
-static inline void get_gdt(struct descriptor_table *table)
+static inline void kvm_get_gdt(struct descriptor_table *table)
 {
 	asm("sgdt %0" : "=m"(*table));
 }
 
-static inline unsigned long read_tr_base(void)
+static inline unsigned long kvm_read_tr_base(void)
 {
 	u16 tr;
 	asm("str %0" : "=g"(tr));
@@ -619,17 +633,17 @@ static inline unsigned long read_msr(unsigned long msr)
 }
 #endif
 
-static inline void fx_save(struct i387_fxsave_struct *image)
+static inline void kvm_fx_save(struct i387_fxsave_struct *image)
 {
 	asm("fxsave (%0)":: "r" (image));
 }
 
-static inline void fx_restore(struct i387_fxsave_struct *image)
+static inline void kvm_fx_restore(struct i387_fxsave_struct *image)
 {
 	asm("fxrstor (%0)":: "r" (image));
 }
 
-static inline void fx_finit(void)
+static inline void kvm_fx_finit(void)
 {
 	asm("finit");
 }
@@ -691,4 +705,34 @@ enum {
 	trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \
 						vcpu, 0, 0, 0, 0, 0, 0)
 
+#ifdef CONFIG_64BIT
+# define KVM_EX_ENTRY ".quad"
+# define KVM_EX_PUSH "pushq"
+#else
+# define KVM_EX_ENTRY ".long"
+# define KVM_EX_PUSH "pushl"
+#endif
+
+/*
+ * Hardware virtualization extension instructions may fault if a
+ * reboot turns off virtualization while processes are running.
+ * Trap the fault and ignore the instruction if that happens.
+ */
+asmlinkage void kvm_handle_fault_on_reboot(void);
+
+#define __kvm_handle_fault_on_reboot(insn) \
+	"666: " insn "\n\t" \
+	".pushsection .text.fixup, \"ax\" \n" \
+	"667: \n\t" \
+	KVM_EX_PUSH " $666b \n\t" \
+	"jmp kvm_handle_fault_on_reboot \n\t" \
+	".popsection \n\t" \
+	".pushsection __ex_table, \"a\" \n\t" \
+	KVM_EX_ENTRY " 666b, 667b \n\t" \
+	".popsection"
+
+#define KVM_ARCH_WANT_MMU_NOTIFIER
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
+int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+
 #endif
diff --git a/include/asm-x86/kvm_x86_emulate.h b/include/asm-x86/kvm_x86_emulate.h
index b877bbd2d3a7..4e8c1e48d91d 100644
--- a/include/asm-x86/kvm_x86_emulate.h
+++ b/include/asm-x86/kvm_x86_emulate.h
@@ -124,7 +124,8 @@ struct decode_cache {
 	u8 rex_prefix;
 	struct operand src;
 	struct operand dst;
-	unsigned long *override_base;
+	bool has_seg_override;
+	u8 seg_override;
 	unsigned int d;
 	unsigned long regs[NR_VCPU_REGS];
 	unsigned long eip;
@@ -134,6 +135,7 @@ struct decode_cache {
 	u8 modrm_reg;
 	u8 modrm_rm;
 	u8 use_modrm_ea;
+	bool rip_relative;
 	unsigned long modrm_ea;
 	void *modrm_ptr;
 	unsigned long modrm_val;
@@ -150,12 +152,7 @@ struct x86_emulate_ctxt {
 	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
 	int mode;
 
-	unsigned long cs_base;
-	unsigned long ds_base;
-	unsigned long es_base;
-	unsigned long ss_base;
-	unsigned long gs_base;
-	unsigned long fs_base;
+	u32 cs_base;
 
 	/* decode cache */
 
diff --git a/include/asm-x86/mach-bigsmp/mach_apic.h b/include/asm-x86/mach-bigsmp/mach_apic.h
index 017c8c19ad8f..c3b9dc6970c9 100644
--- a/include/asm-x86/mach-bigsmp/mach_apic.h
+++ b/include/asm-x86/mach-bigsmp/mach_apic.h
@@ -63,9 +63,9 @@ static inline void init_apic_ldr(void)
 	unsigned long val;
 	int cpu = smp_processor_id();
 
-	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
 	val = calculate_ldr(cpu);
-	apic_write_around(APIC_LDR, val);
+	apic_write(APIC_LDR, val);
 }
 
 static inline void setup_apic_routing(void)
diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h
index 0b2cde5e1b74..f3226b9a6b82 100644
--- a/include/asm-x86/mach-default/mach_apic.h
+++ b/include/asm-x86/mach-default/mach_apic.h
@@ -46,10 +46,10 @@ static inline void init_apic_ldr(void)
 {
 	unsigned long val;
 
-	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
 	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
 	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-	apic_write_around(APIC_LDR, val);
+	apic_write(APIC_LDR, val);
 }
 
 static inline int apic_id_registered(void)
diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h
index 56d001b9dce4..dbab36d64d48 100644
--- a/include/asm-x86/mach-default/smpboot_hooks.h
+++ b/include/asm-x86/mach-default/smpboot_hooks.h
@@ -12,11 +12,11 @@ static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
 {
 	CMOS_WRITE(0xa, 0xf);
 	local_flush_tlb();
-	Dprintk("1.\n");
+	pr_debug("1.\n");
 	*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
-	Dprintk("2.\n");
+	pr_debug("2.\n");
 	*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
-	Dprintk("3.\n");
+	pr_debug("3.\n");
 }
 
 static inline void smpboot_restore_warm_reset_vector(void)
diff --git a/include/asm-x86/mach-es7000/mach_apic.h b/include/asm-x86/mach-es7000/mach_apic.h
index fbc8ad256f5a..0a3fdf930672 100644
--- a/include/asm-x86/mach-es7000/mach_apic.h
+++ b/include/asm-x86/mach-es7000/mach_apic.h
@@ -66,9 +66,9 @@ static inline void init_apic_ldr(void)
 	unsigned long val;
 	int cpu = smp_processor_id();
 
-	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
 	val = calculate_ldr(cpu);
-	apic_write_around(APIC_LDR, val);
+	apic_write(APIC_LDR, val);
 }
 
 #ifndef CONFIG_X86_GENERICARCH
diff --git a/include/asm-x86/mach-generic/mach_mpspec.h b/include/asm-x86/mach-generic/mach_mpspec.h
index 9ef0b941bb22..c83c120be538 100644
--- a/include/asm-x86/mach-generic/mach_mpspec.h
+++ b/include/asm-x86/mach-generic/mach_mpspec.h
@@ -7,4 +7,6 @@
 /* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
 #define MAX_MP_BUSSES 260
 
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				char *productid);
 #endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-x86/mach-summit/mach_apic.h b/include/asm-x86/mach-summit/mach_apic.h
index 1f76c2e70232..c47e2ab5c5ca 100644
--- a/include/asm-x86/mach-summit/mach_apic.h
+++ b/include/asm-x86/mach-summit/mach_apic.h
@@ -63,10 +63,10 @@ static inline void init_apic_ldr(void)
 	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
 	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
 	id = my_cluster | (1UL << count);
-	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	apic_write(APIC_DFR, APIC_DFR_VALUE);
 	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
 	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write_around(APIC_LDR, val);
+	apic_write(APIC_LDR, val);
 }
 
 static inline int multi_timer_check(int apic, int irq)
@@ -122,7 +122,7 @@ static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
 
 static inline physid_mask_t apicid_to_cpu_present(int apicid)
 {
-	return physid_mask_of_physid(0);
+	return physid_mask_of_physid(apicid);
 }
 
 static inline void setup_portio_remap(void)
diff --git a/include/asm-x86/mach-visws/entry_arch.h b/include/asm-x86/mach-visws/entry_arch.h
deleted file mode 100644
index 86be554342d4..000000000000
--- a/include/asm-x86/mach-visws/entry_arch.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * VISWS uses the standard Linux entry points:
- */
-
-#include "../mach-default/entry_arch.h"
diff --git a/include/asm-x86/mach-visws/mach_apic.h b/include/asm-x86/mach-visws/mach_apic.h
deleted file mode 100644
index 6943e7a1d0e6..000000000000
--- a/include/asm-x86/mach-visws/mach_apic.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../mach-default/mach_apic.h"
diff --git a/include/asm-x86/mach-visws/mach_apicdef.h b/include/asm-x86/mach-visws/mach_apicdef.h
deleted file mode 100644
index 42711d152a93..000000000000
--- a/include/asm-x86/mach-visws/mach_apicdef.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../mach-default/mach_apicdef.h"
diff --git a/include/asm-x86/mach-visws/setup_arch.h b/include/asm-x86/mach-visws/setup_arch.h
deleted file mode 100644
index fa4766ca2d10..000000000000
--- a/include/asm-x86/mach-visws/setup_arch.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../mach-default/setup_arch.h"
diff --git a/include/asm-x86/mach-visws/smpboot_hooks.h b/include/asm-x86/mach-visws/smpboot_hooks.h
deleted file mode 100644
index e4433ca88715..000000000000
--- a/include/asm-x86/mach-visws/smpboot_hooks.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../mach-default/smpboot_hooks.h"
diff --git a/include/asm-x86/namei.h b/include/asm-x86/namei.h
deleted file mode 100644
index 415ef5d9550e..000000000000
--- a/include/asm-x86/namei.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_X86_NAMEI_H
-#define _ASM_X86_NAMEI_H
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* _ASM_X86_NAMEI_H */
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index 28d7b4533b1a..49982110e4d9 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -18,8 +18,11 @@
    (ie, 32-bit PAE). */
 #define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
 
-/* PTE_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
-#define PTE_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
+/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
+
+/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+#define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
 
 #define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
 #define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
@@ -29,8 +32,7 @@
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+#define HUGE_MAX_HSTATE 2
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
@@ -144,6 +146,11 @@ static inline pteval_t native_pte_val(pte_t pte)
 	return pte.pte;
 }
 
+static inline pteval_t native_pte_flags(pte_t pte)
+{
+	return native_pte_val(pte) & PTE_FLAGS_MASK;
+}
+
 #define pgprot_val(x)	((x).pgprot)
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
@@ -165,7 +172,7 @@ static inline pteval_t native_pte_val(pte_t pte)
 #endif
 
 #define pte_val(x)	native_pte_val(x)
-#define pte_flags(x)	native_pte_val(x)
+#define pte_flags(x)	native_pte_flags(x)
 #define __pte(x)	native_make_pte(x)
 
 #endif	/* CONFIG_PARAVIRT */
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index ef5e8ec6a6ab..fbbde93f12d6 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -205,7 +205,6 @@ struct pv_apic_ops {
 	 * these shouldn't be in this interface.
 	 */
 	void (*apic_write)(unsigned long reg, u32 v);
-	void (*apic_write_atomic)(unsigned long reg, u32 v);
 	u32 (*apic_read)(unsigned long reg);
 	void (*setup_boot_clock)(void);
 	void (*setup_secondary_clock)(void);
@@ -326,6 +325,15 @@ struct pv_mmu_ops {
 			   unsigned long phys, pgprot_t flags);
 };
 
+struct raw_spinlock;
+struct pv_lock_ops {
+	int (*spin_is_locked)(struct raw_spinlock *lock);
+	int (*spin_is_contended)(struct raw_spinlock *lock);
+	void (*spin_lock)(struct raw_spinlock *lock);
+	int (*spin_trylock)(struct raw_spinlock *lock);
+	void (*spin_unlock)(struct raw_spinlock *lock);
+};
+
 /* This contains all the paravirt structures: we get a convenient
  * number for each function using the offset which we use to indicate
  * what to patch. */
@@ -336,6 +344,7 @@ struct paravirt_patch_template {
 	struct pv_irq_ops pv_irq_ops;
 	struct pv_apic_ops pv_apic_ops;
 	struct pv_mmu_ops pv_mmu_ops;
+	struct pv_lock_ops pv_lock_ops;
 };
 
 extern struct pv_info pv_info;
@@ -345,6 +354,7 @@ extern struct pv_cpu_ops pv_cpu_ops;
 extern struct pv_irq_ops pv_irq_ops;
 extern struct pv_apic_ops pv_apic_ops;
 extern struct pv_mmu_ops pv_mmu_ops;
+extern struct pv_lock_ops pv_lock_ops;
 
 #define PARAVIRT_PATCH(x)					\
 	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
@@ -896,11 +906,6 @@ static inline void apic_write(unsigned long reg, u32 v)
 	PVOP_VCALL2(pv_apic_ops.apic_write, reg, v);
 }
 
-static inline void apic_write_atomic(unsigned long reg, u32 v)
-{
-	PVOP_VCALL2(pv_apic_ops.apic_write_atomic, reg, v);
-}
-
 static inline u32 apic_read(unsigned long reg)
 {
 	return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg);
@@ -1083,6 +1088,9 @@ static inline pteval_t pte_flags(pte_t pte)
 		ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags,
 				 pte.pte);
 
+#ifdef CONFIG_PARAVIRT_DEBUG
+	BUG_ON(ret & PTE_PFN_MASK);
+#endif
 	return ret;
 }
 
@@ -1374,6 +1382,37 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 void _paravirt_nop(void);
 #define paravirt_nop	((void *)_paravirt_nop)
 
+void paravirt_use_bytelocks(void);
+
+#ifdef CONFIG_SMP
+
+static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_is_locked, lock);
+}
+
+static inline int __raw_spin_is_contended(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_is_contended, lock);
+}
+
+static __always_inline void __raw_spin_lock(struct raw_spinlock *lock)
+{
+	PVOP_VCALL1(pv_lock_ops.spin_lock, lock);
+}
+
+static __always_inline int __raw_spin_trylock(struct raw_spinlock *lock)
+{
+	return PVOP_CALL1(int, pv_lock_ops.spin_trylock, lock);
+}
+
+static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
+{
+	PVOP_VCALL1(pv_lock_ops.spin_unlock, lock);
+}
+
+#endif
+
 /* These all sit in the .parainstructions section to tell us what to patch. */
 struct paravirt_patch_site {
 	u8 *instr; 		/* original instructions */
@@ -1396,8 +1435,8 @@ extern struct paravirt_patch_site __parainstructions[],
  * caller saved registers but the argument parameter */
 #define PV_SAVE_REGS "pushq %%rdi;"
 #define PV_RESTORE_REGS "popq %%rdi;"
-#define PV_EXTRA_CLOBBERS EXTRA_CLOBBERS, "rcx" , "rdx"
-#define PV_VEXTRA_CLOBBERS EXTRA_CLOBBERS, "rdi", "rcx" , "rdx"
+#define PV_EXTRA_CLOBBERS EXTRA_CLOBBERS, "rcx" , "rdx", "rsi"
+#define PV_VEXTRA_CLOBBERS EXTRA_CLOBBERS, "rdi", "rcx" , "rdx", "rsi"
 #define PV_FLAGS_ARG "D"
 #endif
 
@@ -1458,6 +1497,7 @@ static inline unsigned long __raw_local_irq_save(void)
 	return f;
 }
 
+
 /* Make sure as little as possible of this mess escapes. */
 #undef PARAVIRT_CALL
 #undef __PVOP_CALL
@@ -1489,8 +1529,26 @@ static inline unsigned long __raw_local_irq_save(void)
 
 
 #ifdef CONFIG_X86_64
-#define PV_SAVE_REGS   pushq %rax; pushq %rdi; pushq %rcx; pushq %rdx
-#define PV_RESTORE_REGS popq %rdx; popq %rcx; popq %rdi; popq %rax
+#define PV_SAVE_REGS				\
+	push %rax;				\
+	push %rcx;				\
+	push %rdx;				\
+	push %rsi;				\
+	push %rdi;				\
+	push %r8;				\
+	push %r9;				\
+	push %r10;				\
+	push %r11
+#define PV_RESTORE_REGS				\
+	pop %r11;				\
+	pop %r10;				\
+	pop %r9;				\
+	pop %r8;				\
+	pop %rdi;				\
+	pop %rsi;				\
+	pop %rdx;				\
+	pop %rcx;				\
+	pop %rax
 #define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
 #define PARA_INDIRECT(addr)	*addr(%rip)
diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h
index 912a3a17b9db..4e91ee1e37aa 100644
--- a/include/asm-x86/percpu.h
+++ b/include/asm-x86/percpu.h
@@ -22,6 +22,32 @@
 
 DECLARE_PER_CPU(struct x8664_pda, pda);
 
+/*
+ * These are supposed to be implemented as a single instruction which
+ * operates on the per-cpu data base segment.  x86-64 doesn't have
+ * that yet, so this is a fairly inefficient workaround for the
+ * meantime.  The single instruction is atomic with respect to
+ * preemption and interrupts, so we need to explicitly disable
+ * interrupts here to achieve the same effect.  However, because it
+ * can be used from within interrupt-disable/enable, we can't actually
+ * disable interrupts; disabling preemption is enough.
+ */
+#define x86_read_percpu(var)						\
+	({								\
+		typeof(per_cpu_var(var)) __tmp;				\
+		preempt_disable();					\
+		__tmp = __get_cpu_var(var);				\
+		preempt_enable();					\
+		__tmp;							\
+	})
+
+#define x86_write_percpu(var, val)					\
+	do {								\
+		preempt_disable();					\
+		__get_cpu_var(var) = (val);				\
+		preempt_enable();					\
+	} while(0)
+
 #else /* CONFIG_X86_64 */
 
 #ifdef __ASSEMBLY__
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
index c93dbb6c2624..105057f34032 100644
--- a/include/asm-x86/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
@@ -25,7 +25,7 @@ static inline int pud_none(pud_t pud)
 
 static inline int pud_bad(pud_t pud)
 {
-	return (pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
 }
 
 static inline int pud_present(pud_t pud)
@@ -120,9 +120,9 @@ static inline void pud_clear(pud_t *pudp)
 		write_cr3(pgd);
 }
 
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_MASK))
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_PFN_MASK))
 
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_MASK))
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
 
 
 /* Find an entry in the second-level page table.. */
@@ -160,7 +160,7 @@ static inline int pte_none(pte_t pte)
 
 static inline unsigned long pte_pfn(pte_t pte)
 {
-	return (pte_val(pte) & PTE_MASK) >> PAGE_SHIFT;
+	return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
 /*
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 49cbd76b9547..04caa2f544df 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -18,6 +18,7 @@
 #define _PAGE_BIT_UNUSED2	10
 #define _PAGE_BIT_UNUSED3	11
 #define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
+#define _PAGE_BIT_SPECIAL	_PAGE_BIT_UNUSED1
 #define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
 
 #define _PAGE_PRESENT	(_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
@@ -34,6 +35,8 @@
 #define _PAGE_UNUSED3	(_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
 #define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
 #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
+#define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
+#define __HAVE_ARCH_PTE_SPECIAL
 
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 #define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
@@ -53,8 +56,8 @@
 			 _PAGE_DIRTY)
 
 /* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_PCD | _PAGE_PWT |		\
-			 _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
+			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
 
 #define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
 #define _PAGE_CACHE_WB		(0)
@@ -180,7 +183,7 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return 0;
+	return pte_val(pte) & _PAGE_SPECIAL;
 }
 
 static inline int pmd_large(pmd_t pte)
@@ -246,7 +249,7 @@ static inline pte_t pte_clrglobal(pte_t pte)
 
 static inline pte_t pte_mkspecial(pte_t pte)
 {
-	return pte;
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
 }
 
 extern pteval_t __supported_pte_mask;
@@ -286,7 +289,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 	return __pgprot(preservebits | addbits);
 }
 
-#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_MASK)
+#define pte_pgprot(x) __pgprot(pte_flags(x) & PTE_FLAGS_MASK)
 
 #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
 
@@ -302,6 +305,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 /* Install a pte for a particular vaddr in kernel space. */
 void set_pte_vaddr(unsigned long vaddr, pte_t pte);
 
+#ifdef CONFIG_X86_32
+extern void native_pagetable_setup_start(pgd_t *base);
+extern void native_pagetable_setup_done(pgd_t *base);
+#else
+static inline void native_pagetable_setup_start(pgd_t *base) {}
+static inline void native_pagetable_setup_done(pgd_t *base) {}
+#endif
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else  /* !CONFIG_PARAVIRT */
@@ -333,6 +344,16 @@ void set_pte_vaddr(unsigned long vaddr, pte_t pte);
 
 #define pte_update(mm, addr, ptep)              do { } while (0)
 #define pte_update_defer(mm, addr, ptep)        do { } while (0)
+
+static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
+{
+	native_pagetable_setup_start(base);
+}
+
+static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
+{
+	native_pagetable_setup_done(base);
+}
 #endif	/* CONFIG_PARAVIRT */
 
 #endif	/* __ASSEMBLY__ */
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index ec871c420d7e..5c3b26567a95 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -88,7 +88,7 @@ extern unsigned long pg0[];
 /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
 #define pmd_none(x)	(!(unsigned long)pmd_val((x)))
 #define pmd_present(x)	(pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PTE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
 
 #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
 
@@ -139,7 +139,7 @@ static inline int pud_large(pud_t pud) { return 0; }
 #define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
 
 #define pmd_page_vaddr(pmd)					\
-	((unsigned long)__va(pmd_val((pmd)) & PTE_MASK))
+	((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
 
 #if defined(CONFIG_HIGHPTE)
 #define pte_offset_map(dir, address)					\
@@ -171,21 +171,6 @@ do {						\
  */
 #define update_mmu_cache(vma, address, pte) do { } while (0)
 
-extern void native_pagetable_setup_start(pgd_t *base);
-extern void native_pagetable_setup_done(pgd_t *base);
-
-#ifndef CONFIG_PARAVIRT
-static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
-{
-	native_pagetable_setup_start(base);
-}
-
-static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
-{
-	native_pagetable_setup_done(base);
-}
-#endif	/* !CONFIG_PARAVIRT */
-
 #endif /* !__ASSEMBLY__ */
 
 /*
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index fa7208b483ca..ac5fff4cc58a 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -16,6 +16,8 @@
 extern pud_t level3_kernel_pgt[512];
 extern pud_t level3_ident_pgt[512];
 extern pmd_t level2_kernel_pgt[512];
+extern pmd_t level2_fixmap_pgt[512];
+extern pmd_t level2_ident_pgt[512];
 extern pgd_t init_level4_pgt[];
 
 #define swapper_pg_dir init_level4_pgt
@@ -156,17 +158,17 @@ static inline void native_pgd_clear(pgd_t *pgd)
 
 static inline int pgd_bad(pgd_t pgd)
 {
-	return (pgd_val(pgd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
 static inline int pud_bad(pud_t pud)
 {
-	return (pud_val(pud) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
 static inline int pmd_bad(pmd_t pmd)
 {
-	return (pmd_val(pmd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
+	return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
 }
 
 #define pte_none(x)	(!pte_val((x)))
@@ -191,7 +193,7 @@ static inline int pmd_bad(pmd_t pmd)
  * Level 4 access.
  */
 #define pgd_page_vaddr(pgd)						\
-	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_MASK))
+	((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
 #define pgd_page(pgd)		(pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
 #define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
 static inline int pgd_large(pgd_t pgd) { return 0; }
@@ -214,7 +216,7 @@ static inline int pud_large(pud_t pte)
 }
 
 /* PMD  - Level 2 access */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_MASK))
+#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
 #define pmd_page(pmd)		(pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
 
 #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h
index 092b39b3a7e6..eff2ecd7fff0 100644
--- a/include/asm-x86/processor-flags.h
+++ b/include/asm-x86/processor-flags.h
@@ -88,10 +88,12 @@
 #define CX86_ARR_BASE	0xc4
 #define CX86_RCR_BASE	0xdc
 
+#ifdef __KERNEL__
 #ifdef CONFIG_VM86
 #define X86_VM_MASK	X86_EFLAGS_VM
 #else
 #define X86_VM_MASK	0 /* No VM86 support */
 #endif
+#endif
 
 #endif	/* __ASM_I386_PROCESSOR_FLAGS_H */
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index 55402d2ab938..5f58da401b43 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -134,7 +134,7 @@ extern __u32			cleared_cpu_caps[NCAPINTS];
 #ifdef CONFIG_SMP
 DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
 #define cpu_data(cpu)		per_cpu(cpu_info, cpu)
-#define current_cpu_data	cpu_data(smp_processor_id())
+#define current_cpu_data	__get_cpu_var(cpu_info)
 #else
 #define cpu_data(cpu)		boot_cpu_data
 #define current_cpu_data	boot_cpu_data
@@ -722,8 +722,6 @@ static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
 
 extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
 
-extern int			force_mwait;
-
 extern void select_idle_routine(const struct cpuinfo_x86 *c);
 
 extern unsigned long		boot_option_idle_override;
diff --git a/include/asm-x86/ptrace-abi.h b/include/asm-x86/ptrace-abi.h
index f224eb3c3157..72e7b9db29bb 100644
--- a/include/asm-x86/ptrace-abi.h
+++ b/include/asm-x86/ptrace-abi.h
@@ -73,11 +73,11 @@
 
 #ifdef __x86_64__
 # define PTRACE_ARCH_PRCTL	  30
-#else
-# define PTRACE_SYSEMU		  31
-# define PTRACE_SYSEMU_SINGLESTEP 32
 #endif
 
+#define PTRACE_SYSEMU		  31
+#define PTRACE_SYSEMU_SINGLESTEP  32
+
 #define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h
index dfc8601c0892..646452ea9ea3 100644
--- a/include/asm-x86/segment.h
+++ b/include/asm-x86/segment.h
@@ -1,6 +1,15 @@
 #ifndef _ASM_X86_SEGMENT_H_
 #define _ASM_X86_SEGMENT_H_
 
+/* Constructor for a conventional segment GDT (or LDT) entry */
+/* This is a macro so it can be used in initializers */
+#define GDT_ENTRY(flags, base, limit)			\
+	((((base)  & 0xff000000ULL) << (56-24)) |	\
+	 (((flags) & 0x0000f0ffULL) << 40) |		\
+	 (((limit) & 0x000f0000ULL) << (48-16)) |	\
+	 (((base)  & 0x00ffffffULL) << 16) |		\
+	 (((limit) & 0x0000ffffULL)))
+
 /* Simple and small GDT entries for booting only */
 
 #define GDT_ENTRY_BOOT_CS	2
diff --git a/include/asm-x86/semaphore.h b/include/asm-x86/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-x86/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
index 90ab2225e71b..a07c6f1c01e1 100644
--- a/include/asm-x86/setup.h
+++ b/include/asm-x86/setup.h
@@ -19,13 +19,28 @@ static inline int is_visws_box(void) { return 0; }
 /*
  * Any setup quirks to be performed?
  */
-extern int (*arch_time_init_quirk)(void);
-extern int (*arch_pre_intr_init_quirk)(void);
-extern int (*arch_intr_init_quirk)(void);
-extern int (*arch_trap_init_quirk)(void);
-extern char * (*arch_memory_setup_quirk)(void);
-extern int (*mach_get_smp_config_quirk)(unsigned int early);
-extern int (*mach_find_smp_config_quirk)(unsigned int reserve);
+struct mpc_config_processor;
+struct mpc_config_bus;
+struct mp_config_oemtable;
+struct x86_quirks {
+	int (*arch_pre_time_init)(void);
+	int (*arch_time_init)(void);
+	int (*arch_pre_intr_init)(void);
+	int (*arch_intr_init)(void);
+	int (*arch_trap_init)(void);
+	char * (*arch_memory_setup)(void);
+	int (*mach_get_smp_config)(unsigned int early);
+	int (*mach_find_smp_config)(unsigned int reserve);
+
+	int *mpc_record;
+	int (*mpc_apic_id)(struct mpc_config_processor *m);
+	void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
+	void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
+	void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
+                                    unsigned short oemsize);
+};
+
+extern struct x86_quirks *x86_quirks;
 
 #ifndef CONFIG_PARAVIRT
 #define paravirt_post_allocator_init()	do {} while (0)
@@ -76,6 +91,7 @@ extern unsigned long init_pg_tables_start;
 extern unsigned long init_pg_tables_end;
 
 #else
+void __init x86_64_init_pda(void);
 void __init x86_64_start_kernel(char *real_mode);
 void __init x86_64_start_reservations(char *real_mode_data);
 
diff --git a/include/asm-x86/signal.h b/include/asm-x86/signal.h
index f15186d39c69..6dac49364e95 100644
--- a/include/asm-x86/signal.h
+++ b/include/asm-x86/signal.h
@@ -181,12 +181,12 @@ typedef struct sigaltstack {
 #ifdef __KERNEL__
 #include <asm/sigcontext.h>
 
-#ifdef __386__
+#ifdef __i386__
 
 #define __HAVE_ARCH_SIG_BITOPS
 
 #define sigaddset(set,sig)		    \
-	(__builtin_constantp(sig)	    \
+	(__builtin_constant_p(sig)	    \
 	 ? __const_sigaddset((set), (sig))  \
 	 : __gen_sigaddset((set), (sig)))
 
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
index c2784b3e0b77..3c877f74f279 100644
--- a/include/asm-x86/smp.h
+++ b/include/asm-x86/smp.h
@@ -25,6 +25,8 @@ extern cpumask_t cpu_callin_map;
 extern void (*mtrr_hook)(void);
 extern void zap_low_mappings(void);
 
+extern int __cpuinit get_local_pda(int cpu);
+
 extern int smp_num_siblings;
 extern unsigned int num_processors;
 extern cpumask_t cpu_initialized;
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
index 21e89bf92f1c..4f9a9861799a 100644
--- a/include/asm-x86/spinlock.h
+++ b/include/asm-x86/spinlock.h
@@ -6,7 +6,7 @@
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <linux/compiler.h>
-
+#include <asm/paravirt.h>
 /*
  * Your basic SMP spinlocks, allowing only a single CPU anywhere
  *
@@ -54,21 +54,21 @@
  * much between them in performance though, especially as locks are out of line.
  */
 #if (NR_CPUS < 256)
-static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
 	return (((tmp >> 8) & 0xff) != (tmp & 0xff));
 }
 
-static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
 	return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1;
 }
 
-static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
 {
 	short inc = 0x0100;
 
@@ -87,9 +87,7 @@ static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
 		: "memory", "cc");
 }
 
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-
-static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
 {
 	int tmp;
 	short new;
@@ -110,7 +108,7 @@ static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
 	return tmp;
 }
 
-static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
 {
 	asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
 		     : "+m" (lock->slock)
@@ -118,21 +116,21 @@ static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
 		     : "memory", "cc");
 }
 #else
-static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
 	return (((tmp >> 16) & 0xffff) != (tmp & 0xffff));
 }
 
-static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 {
 	int tmp = ACCESS_ONCE(lock->slock);
 
 	return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1;
 }
 
-static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
 {
 	int inc = 0x00010000;
 	int tmp;
@@ -153,9 +151,7 @@ static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
 		     : "memory", "cc");
 }
 
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-
-static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
 {
 	int tmp;
 	int new;
@@ -177,7 +173,7 @@ static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
 	return tmp;
 }
 
-static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
 {
 	asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
 		     : "+m" (lock->slock)
@@ -186,6 +182,98 @@ static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
 }
 #endif
 
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+#ifdef CONFIG_PARAVIRT
+/*
+ * Define virtualization-friendly old-style lock byte lock, for use in
+ * pv_lock_ops if desired.
+ *
+ * This differs from the pre-2.6.24 spinlock by always using xchgb
+ * rather than decb to take the lock; this allows it to use a
+ * zero-initialized lock structure.  It also maintains a 1-byte
+ * contention counter, so that we can implement
+ * __byte_spin_is_contended.
+ */
+struct __byte_spinlock {
+	s8 lock;
+	s8 spinners;
+};
+
+static inline int __byte_spin_is_locked(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	return bl->lock != 0;
+}
+
+static inline int __byte_spin_is_contended(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	return bl->spinners != 0;
+}
+
+static inline void __byte_spin_lock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	s8 val = 1;
+
+	asm("1: xchgb %1, %0\n"
+	    "   test %1,%1\n"
+	    "   jz 3f\n"
+	    "   " LOCK_PREFIX "incb %2\n"
+	    "2: rep;nop\n"
+	    "   cmpb $1, %0\n"
+	    "   je 2b\n"
+	    "   " LOCK_PREFIX "decb %2\n"
+	    "   jmp 1b\n"
+	    "3:"
+	    : "+m" (bl->lock), "+q" (val), "+m" (bl->spinners): : "memory");
+}
+
+static inline int __byte_spin_trylock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	u8 old = 1;
+
+	asm("xchgb %1,%0"
+	    : "+m" (bl->lock), "+q" (old) : : "memory");
+
+	return old == 0;
+}
+
+static inline void __byte_spin_unlock(raw_spinlock_t *lock)
+{
+	struct __byte_spinlock *bl = (struct __byte_spinlock *)lock;
+	smp_wmb();
+	bl->lock = 0;
+}
+#else  /* !CONFIG_PARAVIRT */
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_locked(lock);
+}
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_contended(lock);
+}
+
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__ticket_spin_lock(lock);
+}
+
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return __ticket_spin_trylock(lock);
+}
+
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__ticket_spin_unlock(lock);
+}
+#endif	/* CONFIG_PARAVIRT */
+
 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
 {
 	while (__raw_spin_is_locked(lock))
diff --git a/include/asm-x86/spinlock_types.h b/include/asm-x86/spinlock_types.h
index 9029cf78cf5d..06c071c9eee9 100644
--- a/include/asm-x86/spinlock_types.h
+++ b/include/asm-x86/spinlock_types.h
@@ -5,7 +5,7 @@
 # error "please don't include this file directly"
 #endif
 
-typedef struct {
+typedef struct raw_spinlock {
 	unsigned int slock;
 } raw_spinlock_t;
 
diff --git a/include/asm-x86/swiotlb.h b/include/asm-x86/swiotlb.h
index f5d9e74b1e4a..2730b351afcf 100644
--- a/include/asm-x86/swiotlb.h
+++ b/include/asm-x86/swiotlb.h
@@ -35,7 +35,7 @@ extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
 			  int nents, int direction);
 extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
 			     int nents, int direction);
-extern int swiotlb_dma_mapping_error(dma_addr_t dma_addr);
+extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
 extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
 				  void *vaddr, dma_addr_t dma_handle);
 extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
@@ -45,12 +45,14 @@ extern int swiotlb_force;
 
 #ifdef CONFIG_SWIOTLB
 extern int swiotlb;
+extern void pci_swiotlb_init(void);
 #else
 #define swiotlb 0
+static inline void pci_swiotlb_init(void)
+{
+}
 #endif
 
-extern void pci_swiotlb_init(void);
-
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
 #endif /* _ASM_SWIOTLB_H */
diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h
index 895339d2bc0b..da0a675adf94 100644
--- a/include/asm-x86/thread_info.h
+++ b/include/asm-x86/thread_info.h
@@ -75,13 +75,10 @@ struct thread_info {
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_SINGLESTEP		4	/* reenable singlestep on user return*/
 #define TIF_IRET		5	/* force IRET */
-#ifdef CONFIG_X86_32
 #define TIF_SYSCALL_EMU		6	/* syscall emulation active */
-#endif
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SECCOMP		8	/* secure computing */
 #define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
-#define TIF_HRTICK_RESCHED	11	/* reprogram hrtick timer */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* 32bit process */
 #define TIF_FORK		18	/* ret_from_fork */
@@ -100,15 +97,10 @@ struct thread_info {
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_IRET		(1 << TIF_IRET)
-#ifdef CONFIG_X86_32
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
-#else
-#define _TIF_SYSCALL_EMU	0
-#endif
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
-#define _TIF_HRTICK_RESCHED	(1 << TIF_HRTICK_RESCHED)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
@@ -121,18 +113,27 @@ struct thread_info {
 #define _TIF_DS_AREA_MSR	(1 << TIF_DS_AREA_MSR)
 #define _TIF_BTS_TRACE_TS	(1 << TIF_BTS_TRACE_TS)
 
+/* work to do in syscall_trace_enter() */
+#define _TIF_WORK_SYSCALL_ENTRY	\
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | \
+	 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP)
+
+/* work to do in syscall_trace_leave() */
+#define _TIF_WORK_SYSCALL_EXIT	\
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP)
+
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK							\
 	(0x0000FFFF &							\
-	 ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|	\
-	 _TIF_SECCOMP|_TIF_SYSCALL_EMU))
+	 ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|			\
+	   _TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
 
 /* work to do on any return to user space */
 #define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
 
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
-	(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED)
+	(_TIF_SIGPENDING|_TIF_MCE_NOTIFY)
 
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW							\
@@ -151,6 +152,8 @@ struct thread_info {
 #define THREAD_FLAGS GFP_KERNEL
 #endif
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #define alloc_thread_info(tsk)						\
 	((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
 
diff --git a/include/asm-x86/traps.h b/include/asm-x86/traps.h
new file mode 100644
index 000000000000..a4b65a71bd66
--- /dev/null
+++ b/include/asm-x86/traps.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_X86_TRAPS_H
+#define _ASM_X86_TRAPS_H
+
+/* Common in X86_32 and X86_64 */
+asmlinkage void divide_error(void);
+asmlinkage void debug(void);
+asmlinkage void nmi(void);
+asmlinkage void int3(void);
+asmlinkage void overflow(void);
+asmlinkage void bounds(void);
+asmlinkage void invalid_op(void);
+asmlinkage void device_not_available(void);
+asmlinkage void coprocessor_segment_overrun(void);
+asmlinkage void invalid_TSS(void);
+asmlinkage void segment_not_present(void);
+asmlinkage void stack_segment(void);
+asmlinkage void general_protection(void);
+asmlinkage void page_fault(void);
+asmlinkage void coprocessor_error(void);
+asmlinkage void simd_coprocessor_error(void);
+asmlinkage void alignment_check(void);
+asmlinkage void spurious_interrupt_bug(void);
+#ifdef CONFIG_X86_MCE
+asmlinkage void machine_check(void);
+#endif /* CONFIG_X86_MCE */
+
+void do_divide_error(struct pt_regs *, long);
+void do_overflow(struct pt_regs *, long);
+void do_bounds(struct pt_regs *, long);
+void do_coprocessor_segment_overrun(struct pt_regs *, long);
+void do_invalid_TSS(struct pt_regs *, long);
+void do_segment_not_present(struct pt_regs *, long);
+void do_stack_segment(struct pt_regs *, long);
+void do_alignment_check(struct pt_regs *, long);
+void do_invalid_op(struct pt_regs *, long);
+void do_general_protection(struct pt_regs *, long);
+void do_nmi(struct pt_regs *, long);
+
+extern int panic_on_unrecovered_nmi;
+extern int kstack_depth_to_print;
+
+#ifdef CONFIG_X86_32
+
+void do_iret_error(struct pt_regs *, long);
+void do_int3(struct pt_regs *, long);
+void do_debug(struct pt_regs *, long);
+void math_error(void __user *);
+void do_coprocessor_error(struct pt_regs *, long);
+void do_simd_coprocessor_error(struct pt_regs *, long);
+void do_spurious_interrupt_bug(struct pt_regs *, long);
+unsigned long patch_espfix_desc(unsigned long, unsigned long);
+asmlinkage void math_emulate(long);
+
+#else /* CONFIG_X86_32 */
+
+asmlinkage void double_fault(void);
+
+asmlinkage void do_int3(struct pt_regs *, long);
+asmlinkage void do_stack_segment(struct pt_regs *, long);
+asmlinkage void do_debug(struct pt_regs *, unsigned long);
+asmlinkage void do_coprocessor_error(struct pt_regs *);
+asmlinkage void do_simd_coprocessor_error(struct pt_regs *);
+asmlinkage void do_spurious_interrupt_bug(struct pt_regs *);
+
+#endif /* CONFIG_X86_32 */
+#endif /* _ASM_X86_TRAPS_H */
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
index f6fa4d841bbc..5f702d1d5218 100644
--- a/include/asm-x86/uaccess.h
+++ b/include/asm-x86/uaccess.h
@@ -451,3 +451,4 @@ extern struct movsl_mask {
 #endif
 
 #endif
+
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index 8317d94771d3..d7394673b772 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -332,6 +332,12 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index 9c1a4a3470d9..3a341d791792 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -639,6 +639,20 @@ __SYSCALL(__NR_fallocate, sys_fallocate)
 __SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
 #define __NR_timerfd_gettime			287
 __SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
+#define __NR_paccept				288
+__SYSCALL(__NR_paccept, sys_paccept)
+#define __NR_signalfd4				289
+__SYSCALL(__NR_signalfd4, sys_signalfd4)
+#define __NR_eventfd2				290
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+#define __NR_epoll_create1			291
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_dup3				292
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR_pipe2				293
+__SYSCALL(__NR_pipe2, sys_pipe2)
+#define __NR_inotify_init1			294
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
 
 
 #ifndef __NO_STUBS
diff --git a/include/asm-x86/uv/bios.h b/include/asm-x86/uv/bios.h
new file mode 100644
index 000000000000..aa73362ff5df
--- /dev/null
+++ b/include/asm-x86/uv/bios.h
@@ -0,0 +1,68 @@
+#ifndef _ASM_X86_BIOS_H
+#define _ASM_X86_BIOS_H
+
+/*
+ * BIOS layer definitions.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/rtc.h>
+
+#define BIOS_FREQ_BASE			0x01000001
+
+enum {
+	BIOS_FREQ_BASE_PLATFORM = 0,
+	BIOS_FREQ_BASE_INTERVAL_TIMER = 1,
+	BIOS_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+# define BIOS_CALL(result, a0, a1, a2, a3, a4, a5, a6, a7)		\
+	do {								\
+		/* XXX - the real call goes here */			\
+		result.status = BIOS_STATUS_UNIMPLEMENTED;		\
+		isrv.v0 = 0;						\
+		isrv.v1 = 0;						\
+	} while (0)
+
+enum {
+	BIOS_STATUS_SUCCESS		=  0,
+	BIOS_STATUS_UNIMPLEMENTED	= -1,
+	BIOS_STATUS_EINVAL		= -2,
+	BIOS_STATUS_ERROR		= -3
+};
+
+struct uv_bios_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+extern long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info);
+extern const char *x86_bios_strerror(long status);
+
+#endif /* _ASM_X86_BIOS_H */
diff --git a/include/asm-x86/vdso.h b/include/asm-x86/vdso.h
index 86e085e003d2..8e18fb80f5e6 100644
--- a/include/asm-x86/vdso.h
+++ b/include/asm-x86/vdso.h
@@ -36,4 +36,12 @@ extern const char VDSO32_PRELINK[];
 extern void __user __kernel_sigreturn;
 extern void __user __kernel_rt_sigreturn;
 
+/*
+ * These symbols are defined by vdso32.S to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vdso32_int80_start, vdso32_int80_end;
+extern const char vdso32_syscall_start, vdso32_syscall_end;
+extern const char vdso32_sysenter_start, vdso32_sysenter_end;
+
 #endif	/* asm-x86/vdso.h */
diff --git a/include/asm-x86/xen/events.h b/include/asm-x86/xen/events.h
index f8d57ea1f05f..8ded74720024 100644
--- a/include/asm-x86/xen/events.h
+++ b/include/asm-x86/xen/events.h
@@ -5,6 +5,7 @@ enum ipi_vector {
 	XEN_RESCHEDULE_VECTOR,
 	XEN_CALL_FUNCTION_VECTOR,
 	XEN_CALL_FUNCTION_SINGLE_VECTOR,
+	XEN_SPIN_UNLOCK_VECTOR,
 
 	XEN_NR_IPIS,
 };
diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h
index 2a4f9b41d684..91cb7fd5c123 100644
--- a/include/asm-x86/xen/hypercall.h
+++ b/include/asm-x86/xen/hypercall.h
@@ -40,83 +40,157 @@
 #include <xen/interface/sched.h>
 #include <xen/interface/physdev.h>
 
+/*
+ * The hypercall asms have to meet several constraints:
+ * - Work on 32- and 64-bit.
+ *    The two architectures put their arguments in different sets of
+ *    registers.
+ *
+ * - Work around asm syntax quirks
+ *    It isn't possible to specify one of the rNN registers in a
+ *    constraint, so we use explicit register variables to get the
+ *    args into the right place.
+ *
+ * - Mark all registers as potentially clobbered
+ *    Even unused parameters can be clobbered by the hypervisor, so we
+ *    need to make sure gcc knows it.
+ *
+ * - Avoid compiler bugs.
+ *    This is the tricky part.  Because x86_32 has such a constrained
+ *    register set, gcc versions below 4.3 have trouble generating
+ *    code when all the arg registers and memory are trashed by the
+ *    asm.  There are syntactically simpler ways of achieving the
+ *    semantics below, but they cause the compiler to crash.
+ *
+ *    The only combination I found which works is:
+ *     - assign the __argX variables first
+ *     - list all actually used parameters as "+r" (__argX)
+ *     - clobber the rest
+ *
+ * The result certainly isn't pretty, and it really shows up cpp's
+ * weakness as as macro language.  Sorry.  (But let's just give thanks
+ * there aren't more than 5 arguments...)
+ */
+
 extern struct { char _entry[32]; } hypercall_page[];
 
+#define __HYPERCALL		"call hypercall_page+%c[offset]"
+#define __HYPERCALL_ENTRY(x)						\
+	[offset] "i" (__HYPERVISOR_##x * sizeof(hypercall_page[0]))
+
+#ifdef CONFIG_X86_32
+#define __HYPERCALL_RETREG	"eax"
+#define __HYPERCALL_ARG1REG	"ebx"
+#define __HYPERCALL_ARG2REG	"ecx"
+#define __HYPERCALL_ARG3REG	"edx"
+#define __HYPERCALL_ARG4REG	"esi"
+#define __HYPERCALL_ARG5REG	"edi"
+#else
+#define __HYPERCALL_RETREG	"rax"
+#define __HYPERCALL_ARG1REG	"rdi"
+#define __HYPERCALL_ARG2REG	"rsi"
+#define __HYPERCALL_ARG3REG	"rdx"
+#define __HYPERCALL_ARG4REG	"r10"
+#define __HYPERCALL_ARG5REG	"r8"
+#endif
+
+#define __HYPERCALL_DECLS						\
+	register unsigned long __res  asm(__HYPERCALL_RETREG);		\
+	register unsigned long __arg1 asm(__HYPERCALL_ARG1REG) = __arg1; \
+	register unsigned long __arg2 asm(__HYPERCALL_ARG2REG) = __arg2; \
+	register unsigned long __arg3 asm(__HYPERCALL_ARG3REG) = __arg3; \
+	register unsigned long __arg4 asm(__HYPERCALL_ARG4REG) = __arg4; \
+	register unsigned long __arg5 asm(__HYPERCALL_ARG5REG) = __arg5;
+
+#define __HYPERCALL_0PARAM	"=r" (__res)
+#define __HYPERCALL_1PARAM	__HYPERCALL_0PARAM, "+r" (__arg1)
+#define __HYPERCALL_2PARAM	__HYPERCALL_1PARAM, "+r" (__arg2)
+#define __HYPERCALL_3PARAM	__HYPERCALL_2PARAM, "+r" (__arg3)
+#define __HYPERCALL_4PARAM	__HYPERCALL_3PARAM, "+r" (__arg4)
+#define __HYPERCALL_5PARAM	__HYPERCALL_4PARAM, "+r" (__arg5)
+
+#define __HYPERCALL_0ARG()
+#define __HYPERCALL_1ARG(a1)						\
+	__HYPERCALL_0ARG()		__arg1 = (unsigned long)(a1);
+#define __HYPERCALL_2ARG(a1,a2)						\
+	__HYPERCALL_1ARG(a1)		__arg2 = (unsigned long)(a2);
+#define __HYPERCALL_3ARG(a1,a2,a3)					\
+	__HYPERCALL_2ARG(a1,a2)		__arg3 = (unsigned long)(a3);
+#define __HYPERCALL_4ARG(a1,a2,a3,a4)					\
+	__HYPERCALL_3ARG(a1,a2,a3)	__arg4 = (unsigned long)(a4);
+#define __HYPERCALL_5ARG(a1,a2,a3,a4,a5)				\
+	__HYPERCALL_4ARG(a1,a2,a3,a4)	__arg5 = (unsigned long)(a5);
+
+#define __HYPERCALL_CLOBBER5	"memory"
+#define __HYPERCALL_CLOBBER4	__HYPERCALL_CLOBBER5, __HYPERCALL_ARG5REG
+#define __HYPERCALL_CLOBBER3	__HYPERCALL_CLOBBER4, __HYPERCALL_ARG4REG
+#define __HYPERCALL_CLOBBER2	__HYPERCALL_CLOBBER3, __HYPERCALL_ARG3REG
+#define __HYPERCALL_CLOBBER1	__HYPERCALL_CLOBBER2, __HYPERCALL_ARG2REG
+#define __HYPERCALL_CLOBBER0	__HYPERCALL_CLOBBER1, __HYPERCALL_ARG1REG
+
 #define _hypercall0(type, name)						\
 ({									\
-	long __res;							\
-	asm volatile (							\
-		"call %[call]"						\
-		: "=a" (__res)						\
-		: [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
-		: "memory" );						\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_0ARG();						\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_0PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER0);				\
 	(type)__res;							\
 })
 
 #define _hypercall1(type, name, a1)					\
 ({									\
-	long __res, __ign1;						\
-	asm volatile (							\
-		"call %[call]"						\
-		: "=a" (__res), "=b" (__ign1)				\
-		: "1" ((long)(a1)),					\
-		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
-		: "memory" );						\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_1ARG(a1);						\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_1PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER1);				\
 	(type)__res;							\
 })
 
 #define _hypercall2(type, name, a1, a2)					\
 ({									\
-	long __res, __ign1, __ign2;					\
-	asm volatile (							\
-		"call %[call]"						\
-		: "=a" (__res), "=b" (__ign1), "=c" (__ign2)		\
-		: "1" ((long)(a1)), "2" ((long)(a2)),			\
-		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
-		: "memory" );						\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_2ARG(a1, a2);					\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_2PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER2);				\
 	(type)__res;							\
 })
 
 #define _hypercall3(type, name, a1, a2, a3)				\
 ({									\
-	long __res, __ign1, __ign2, __ign3;				\
-	asm volatile (							\
-		"call %[call]"						\
-		: "=a" (__res), "=b" (__ign1), "=c" (__ign2),		\
-		"=d" (__ign3)						\
-		: "1" ((long)(a1)), "2" ((long)(a2)),			\
-		  "3" ((long)(a3)),					\
-		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
-		: "memory" );						\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_3ARG(a1, a2, a3);					\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_3PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER3);				\
 	(type)__res;							\
 })
 
 #define _hypercall4(type, name, a1, a2, a3, a4)				\
 ({									\
-	long __res, __ign1, __ign2, __ign3, __ign4;			\
-	asm volatile (							\
-		"call %[call]"						\
-		: "=a" (__res), "=b" (__ign1), "=c" (__ign2),		\
-		"=d" (__ign3), "=S" (__ign4)				\
-		: "1" ((long)(a1)), "2" ((long)(a2)),			\
-		  "3" ((long)(a3)), "4" ((long)(a4)),			\
-		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
-		: "memory" );						\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_4ARG(a1, a2, a3, a4);				\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_4PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER4);				\
 	(type)__res;							\
 })
 
 #define _hypercall5(type, name, a1, a2, a3, a4, a5)			\
 ({									\
-	long __res, __ign1, __ign2, __ign3, __ign4, __ign5;		\
-	asm volatile (							\
-		"call %[call]"						\
-		: "=a" (__res), "=b" (__ign1), "=c" (__ign2),		\
-		"=d" (__ign3), "=S" (__ign4), "=D" (__ign5)		\
-		: "1" ((long)(a1)), "2" ((long)(a2)),			\
-		  "3" ((long)(a3)), "4" ((long)(a4)),			\
-		  "5" ((long)(a5)),					\
-		  [call] "m" (hypercall_page[__HYPERVISOR_##name])	\
-		: "memory" );						\
+	__HYPERCALL_DECLS;						\
+	__HYPERCALL_5ARG(a1, a2, a3, a4, a5);				\
+	asm volatile (__HYPERCALL					\
+		      : __HYPERCALL_5PARAM				\
+		      : __HYPERCALL_ENTRY(name)				\
+		      : __HYPERCALL_CLOBBER5);				\
 	(type)__res;							\
 })
 
@@ -152,6 +226,7 @@ HYPERVISOR_stack_switch(unsigned long ss, unsigned long esp)
 	return _hypercall2(int, stack_switch, ss, esp);
 }
 
+#ifdef CONFIG_X86_32
 static inline int
 HYPERVISOR_set_callbacks(unsigned long event_selector,
 			 unsigned long event_address,
@@ -162,6 +237,17 @@ HYPERVISOR_set_callbacks(unsigned long event_selector,
 			   event_selector, event_address,
 			   failsafe_selector, failsafe_address);
 }
+#else  /* CONFIG_X86_64 */
+static inline int
+HYPERVISOR_set_callbacks(unsigned long event_address,
+			unsigned long failsafe_address,
+			unsigned long syscall_address)
+{
+	return _hypercall3(int, set_callbacks,
+			   event_address, failsafe_address,
+			   syscall_address);
+}
+#endif  /* CONFIG_X86_{32,64} */
 
 static inline int
 HYPERVISOR_callback_op(int cmd, void *arg)
@@ -223,12 +309,12 @@ static inline int
 HYPERVISOR_update_va_mapping(unsigned long va, pte_t new_val,
 			     unsigned long flags)
 {
-	unsigned long pte_hi = 0;
-#ifdef CONFIG_X86_PAE
-	pte_hi = new_val.pte_high;
-#endif
-	return _hypercall4(int, update_va_mapping, va,
-			   new_val.pte_low, pte_hi, flags);
+	if (sizeof(new_val) == sizeof(long))
+		return _hypercall3(int, update_va_mapping, va,
+				   new_val.pte, flags);
+	else
+		return _hypercall4(int, update_va_mapping, va,
+				   new_val.pte, new_val.pte >> 32, flags);
 }
 
 static inline int
@@ -281,12 +367,13 @@ static inline int
 HYPERVISOR_update_va_mapping_otherdomain(unsigned long va, pte_t new_val,
 					 unsigned long flags, domid_t domid)
 {
-	unsigned long pte_hi = 0;
-#ifdef CONFIG_X86_PAE
-	pte_hi = new_val.pte_high;
-#endif
-	return _hypercall5(int, update_va_mapping_otherdomain, va,
-			   new_val.pte_low, pte_hi, flags, domid);
+	if (sizeof(new_val) == sizeof(long))
+		return _hypercall4(int, update_va_mapping_otherdomain, va,
+				   new_val.pte, flags, domid);
+	else
+		return _hypercall5(int, update_va_mapping_otherdomain, va,
+				   new_val.pte, new_val.pte >> 32,
+				   flags, domid);
 }
 
 static inline int
@@ -301,6 +388,14 @@ HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args)
 	return _hypercall3(int, vcpu_op, cmd, vcpuid, extra_args);
 }
 
+#ifdef CONFIG_X86_64
+static inline int
+HYPERVISOR_set_segment_base(int reg, unsigned long value)
+{
+	return _hypercall2(int, set_segment_base, reg, value);
+}
+#endif
+
 static inline int
 HYPERVISOR_suspend(unsigned long srec)
 {
@@ -327,14 +422,14 @@ MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va,
 {
 	mcl->op = __HYPERVISOR_update_va_mapping;
 	mcl->args[0] = va;
-#ifdef CONFIG_X86_PAE
-	mcl->args[1] = new_val.pte_low;
-	mcl->args[2] = new_val.pte_high;
-#else
-	mcl->args[1] = new_val.pte_low;
-	mcl->args[2] = 0;
-#endif
-	mcl->args[3] = flags;
+	if (sizeof(new_val) == sizeof(long)) {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = flags;
+	} else {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = new_val.pte >> 32;
+		mcl->args[3] = flags;
+	}
 }
 
 static inline void
@@ -354,15 +449,16 @@ MULTI_update_va_mapping_otherdomain(struct multicall_entry *mcl, unsigned long v
 {
 	mcl->op = __HYPERVISOR_update_va_mapping_otherdomain;
 	mcl->args[0] = va;
-#ifdef CONFIG_X86_PAE
-	mcl->args[1] = new_val.pte_low;
-	mcl->args[2] = new_val.pte_high;
-#else
-	mcl->args[1] = new_val.pte_low;
-	mcl->args[2] = 0;
-#endif
-	mcl->args[3] = flags;
-	mcl->args[4] = domid;
+	if (sizeof(new_val) == sizeof(long)) {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = flags;
+		mcl->args[3] = domid;
+	} else {
+		mcl->args[1] = new_val.pte;
+		mcl->args[2] = new_val.pte >> 32;
+		mcl->args[3] = flags;
+		mcl->args[4] = domid;
+	}
 }
 
 static inline void
@@ -370,10 +466,15 @@ MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr,
 			struct desc_struct desc)
 {
 	mcl->op = __HYPERVISOR_update_descriptor;
-	mcl->args[0] = maddr;
-	mcl->args[1] = maddr >> 32;
-	mcl->args[2] = desc.a;
-	mcl->args[3] = desc.b;
+	if (sizeof(maddr) == sizeof(long)) {
+		mcl->args[0] = maddr;
+		mcl->args[1] = *(unsigned long *)&desc;
+	} else {
+		mcl->args[0] = maddr;
+		mcl->args[1] = maddr >> 32;
+		mcl->args[2] = desc.a;
+		mcl->args[3] = desc.b;
+	}
 }
 
 static inline void
diff --git a/include/asm-x86/xen/interface.h b/include/asm-x86/xen/interface.h
index 6227000a1e84..9d810f2538a2 100644
--- a/include/asm-x86/xen/interface.h
+++ b/include/asm-x86/xen/interface.h
@@ -1,13 +1,13 @@
 /******************************************************************************
  * arch-x86_32.h
  *
- * Guest OS interface to x86 32-bit Xen.
+ * Guest OS interface to x86 Xen.
  *
  * Copyright (c) 2004, K A Fraser
  */
 
-#ifndef __XEN_PUBLIC_ARCH_X86_32_H__
-#define __XEN_PUBLIC_ARCH_X86_32_H__
+#ifndef __ASM_X86_XEN_INTERFACE_H
+#define __ASM_X86_XEN_INTERFACE_H
 
 #ifdef __XEN__
 #define __DEFINE_GUEST_HANDLE(name, type) \
@@ -57,6 +57,17 @@ DEFINE_GUEST_HANDLE(long);
 DEFINE_GUEST_HANDLE(void);
 #endif
 
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#endif
+
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/* Maximum number of virtual CPUs in multi-processor guests. */
+#define MAX_VIRT_CPUS 32
+
 /*
  * SEGMENT DESCRIPTOR TABLES
  */
@@ -71,58 +82,21 @@ DEFINE_GUEST_HANDLE(void);
 #define FIRST_RESERVED_GDT_ENTRY (FIRST_RESERVED_GDT_BYTE / 8)
 
 /*
- * These flat segments are in the Xen-private section of every GDT. Since these
- * are also present in the initial GDT, many OSes will be able to avoid
- * installing their own GDT.
- */
-#define FLAT_RING1_CS 0xe019    /* GDT index 259 */
-#define FLAT_RING1_DS 0xe021    /* GDT index 260 */
-#define FLAT_RING1_SS 0xe021    /* GDT index 260 */
-#define FLAT_RING3_CS 0xe02b    /* GDT index 261 */
-#define FLAT_RING3_DS 0xe033    /* GDT index 262 */
-#define FLAT_RING3_SS 0xe033    /* GDT index 262 */
-
-#define FLAT_KERNEL_CS FLAT_RING1_CS
-#define FLAT_KERNEL_DS FLAT_RING1_DS
-#define FLAT_KERNEL_SS FLAT_RING1_SS
-#define FLAT_USER_CS    FLAT_RING3_CS
-#define FLAT_USER_DS    FLAT_RING3_DS
-#define FLAT_USER_SS    FLAT_RING3_SS
-
-/* And the trap vector is... */
-#define TRAP_INSTR "int $0x82"
-
-/*
- * Virtual addresses beyond this are not modifiable by guest OSes. The
- * machine->physical mapping table starts at this address, read-only.
- */
-#ifdef CONFIG_X86_PAE
-#define __HYPERVISOR_VIRT_START 0xF5800000
-#else
-#define __HYPERVISOR_VIRT_START 0xFC000000
-#endif
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#endif
-
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
-
-/* Maximum number of virtual CPUs in multi-processor guests. */
-#define MAX_VIRT_CPUS 32
-
-#ifndef __ASSEMBLY__
-
-/*
  * Send an array of these to HYPERVISOR_set_trap_table()
+ * The privilege level specifies which modes may enter a trap via a software
+ * interrupt. On x86/64, since rings 1 and 2 are unavailable, we allocate
+ * privilege levels as follows:
+ *  Level == 0: Noone may enter
+ *  Level == 1: Kernel may enter
+ *  Level == 2: Kernel may enter
+ *  Level == 3: Everyone may enter
  */
 #define TI_GET_DPL(_ti)		((_ti)->flags & 3)
 #define TI_GET_IF(_ti)		((_ti)->flags & 4)
 #define TI_SET_DPL(_ti, _dpl)	((_ti)->flags |= (_dpl))
 #define TI_SET_IF(_ti, _if)	((_ti)->flags |= ((!!(_if))<<2))
 
+#ifndef __ASSEMBLY__
 struct trap_info {
     uint8_t       vector;  /* exception vector                              */
     uint8_t       flags;   /* 0-3: privilege level; 4: clear event enable?  */
@@ -131,32 +105,21 @@ struct trap_info {
 };
 DEFINE_GUEST_HANDLE_STRUCT(trap_info);
 
-struct cpu_user_regs {
-    uint32_t ebx;
-    uint32_t ecx;
-    uint32_t edx;
-    uint32_t esi;
-    uint32_t edi;
-    uint32_t ebp;
-    uint32_t eax;
-    uint16_t error_code;    /* private */
-    uint16_t entry_vector;  /* private */
-    uint32_t eip;
-    uint16_t cs;
-    uint8_t  saved_upcall_mask;
-    uint8_t  _pad0;
-    uint32_t eflags;        /* eflags.IF == !saved_upcall_mask */
-    uint32_t esp;
-    uint16_t ss, _pad1;
-    uint16_t es, _pad2;
-    uint16_t ds, _pad3;
-    uint16_t fs, _pad4;
-    uint16_t gs, _pad5;
+struct arch_shared_info {
+    unsigned long max_pfn;                  /* max pfn that appears in table */
+    /* Frame containing list of mfns containing list of mfns containing p2m. */
+    unsigned long pfn_to_mfn_frame_list_list;
+    unsigned long nmi_reason;
 };
-DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+#endif	/* !__ASSEMBLY__ */
 
-typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+#ifdef CONFIG_X86_32
+#include "interface_32.h"
+#else
+#include "interface_64.h"
+#endif
 
+#ifndef __ASSEMBLY__
 /*
  * The following is all CPU context. Note that the fpu_ctxt block is filled
  * in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
@@ -173,33 +136,29 @@ struct vcpu_guest_context {
     unsigned long ldt_base, ldt_ents;       /* LDT (linear address, # ents) */
     unsigned long gdt_frames[16], gdt_ents; /* GDT (machine frames, # ents) */
     unsigned long kernel_ss, kernel_sp;     /* Virtual TSS (only SS1/SP1)   */
+    /* NB. User pagetable on x86/64 is placed in ctrlreg[1]. */
     unsigned long ctrlreg[8];               /* CR0-CR7 (control registers)  */
     unsigned long debugreg[8];              /* DB0-DB7 (debug registers)    */
+#ifdef __i386__
     unsigned long event_callback_cs;        /* CS:EIP of event callback     */
     unsigned long event_callback_eip;
     unsigned long failsafe_callback_cs;     /* CS:EIP of failsafe callback  */
     unsigned long failsafe_callback_eip;
+#else
+    unsigned long event_callback_eip;
+    unsigned long failsafe_callback_eip;
+    unsigned long syscall_callback_eip;
+#endif
     unsigned long vm_assist;                /* VMASST_TYPE_* bitmap */
+#ifdef __x86_64__
+    /* Segment base addresses. */
+    uint64_t      fs_base;
+    uint64_t      gs_base_kernel;
+    uint64_t      gs_base_user;
+#endif
 };
 DEFINE_GUEST_HANDLE_STRUCT(vcpu_guest_context);
-
-struct arch_shared_info {
-    unsigned long max_pfn;                  /* max pfn that appears in table */
-    /* Frame containing list of mfns containing list of mfns containing p2m. */
-    unsigned long pfn_to_mfn_frame_list_list;
-    unsigned long nmi_reason;
-};
-
-struct arch_vcpu_info {
-    unsigned long cr2;
-    unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
-};
-
-struct xen_callback {
-	unsigned long cs;
-	unsigned long eip;
-};
-#endif /* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLY__ */
 
 /*
  * Prefix forces emulation of some non-trapping instructions.
@@ -213,4 +172,4 @@ struct xen_callback {
 #define XEN_CPUID          XEN_EMULATE_PREFIX "cpuid"
 #endif
 
-#endif
+#endif	/* __ASM_X86_XEN_INTERFACE_H */
diff --git a/include/asm-x86/xen/interface_32.h b/include/asm-x86/xen/interface_32.h
new file mode 100644
index 000000000000..d8ac41d5db86
--- /dev/null
+++ b/include/asm-x86/xen/interface_32.h
@@ -0,0 +1,97 @@
+/******************************************************************************
+ * arch-x86_32.h
+ *
+ * Guest OS interface to x86 32-bit Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __ASM_X86_XEN_INTERFACE_32_H
+#define __ASM_X86_XEN_INTERFACE_32_H
+
+
+/*
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+#define FLAT_RING1_CS 0xe019    /* GDT index 259 */
+#define FLAT_RING1_DS 0xe021    /* GDT index 260 */
+#define FLAT_RING1_SS 0xe021    /* GDT index 260 */
+#define FLAT_RING3_CS 0xe02b    /* GDT index 261 */
+#define FLAT_RING3_DS 0xe033    /* GDT index 262 */
+#define FLAT_RING3_SS 0xe033    /* GDT index 262 */
+
+#define FLAT_KERNEL_CS FLAT_RING1_CS
+#define FLAT_KERNEL_DS FLAT_RING1_DS
+#define FLAT_KERNEL_SS FLAT_RING1_SS
+#define FLAT_USER_CS    FLAT_RING3_CS
+#define FLAT_USER_DS    FLAT_RING3_DS
+#define FLAT_USER_SS    FLAT_RING3_SS
+
+/* And the trap vector is... */
+#define TRAP_INSTR "int $0x82"
+
+/*
+ * Virtual addresses beyond this are not modifiable by guest OSes. The
+ * machine->physical mapping table starts at this address, read-only.
+ */
+#define __HYPERVISOR_VIRT_START 0xF5800000
+
+#ifndef __ASSEMBLY__
+
+struct cpu_user_regs {
+    uint32_t ebx;
+    uint32_t ecx;
+    uint32_t edx;
+    uint32_t esi;
+    uint32_t edi;
+    uint32_t ebp;
+    uint32_t eax;
+    uint16_t error_code;    /* private */
+    uint16_t entry_vector;  /* private */
+    uint32_t eip;
+    uint16_t cs;
+    uint8_t  saved_upcall_mask;
+    uint8_t  _pad0;
+    uint32_t eflags;        /* eflags.IF == !saved_upcall_mask */
+    uint32_t esp;
+    uint16_t ss, _pad1;
+    uint16_t es, _pad2;
+    uint16_t ds, _pad3;
+    uint16_t fs, _pad4;
+    uint16_t gs, _pad5;
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
+
+struct arch_vcpu_info {
+    unsigned long cr2;
+    unsigned long pad[5]; /* sizeof(struct vcpu_info) == 64 */
+};
+
+struct xen_callback {
+	unsigned long cs;
+	unsigned long eip;
+};
+typedef struct xen_callback xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __eip)				\
+	((struct xen_callback){ .cs = (__cs), .eip = (unsigned long)(__eip) })
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * Page-directory addresses above 4GB do not fit into architectural %cr3.
+ * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
+ * must use the following accessor macros to pack/unpack valid MFNs.
+ *
+ * Note that Xen is using the fact that the pagetable base is always
+ * page-aligned, and putting the 12 MSB of the address into the 12 LSB
+ * of cr3.
+ */
+#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
+#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
+
+#endif	/* __ASM_X86_XEN_INTERFACE_32_H */
diff --git a/include/asm-x86/xen/interface_64.h b/include/asm-x86/xen/interface_64.h
new file mode 100644
index 000000000000..842266ce96e6
--- /dev/null
+++ b/include/asm-x86/xen/interface_64.h
@@ -0,0 +1,159 @@
+#ifndef __ASM_X86_XEN_INTERFACE_64_H
+#define __ASM_X86_XEN_INTERFACE_64_H
+
+/*
+ * 64-bit segment selectors
+ * These flat segments are in the Xen-private section of every GDT. Since these
+ * are also present in the initial GDT, many OSes will be able to avoid
+ * installing their own GDT.
+ */
+
+#define FLAT_RING3_CS32 0xe023  /* GDT index 260 */
+#define FLAT_RING3_CS64 0xe033  /* GDT index 261 */
+#define FLAT_RING3_DS32 0xe02b  /* GDT index 262 */
+#define FLAT_RING3_DS64 0x0000  /* NULL selector */
+#define FLAT_RING3_SS32 0xe02b  /* GDT index 262 */
+#define FLAT_RING3_SS64 0xe02b  /* GDT index 262 */
+
+#define FLAT_KERNEL_DS64 FLAT_RING3_DS64
+#define FLAT_KERNEL_DS32 FLAT_RING3_DS32
+#define FLAT_KERNEL_DS   FLAT_KERNEL_DS64
+#define FLAT_KERNEL_CS64 FLAT_RING3_CS64
+#define FLAT_KERNEL_CS32 FLAT_RING3_CS32
+#define FLAT_KERNEL_CS   FLAT_KERNEL_CS64
+#define FLAT_KERNEL_SS64 FLAT_RING3_SS64
+#define FLAT_KERNEL_SS32 FLAT_RING3_SS32
+#define FLAT_KERNEL_SS   FLAT_KERNEL_SS64
+
+#define FLAT_USER_DS64 FLAT_RING3_DS64
+#define FLAT_USER_DS32 FLAT_RING3_DS32
+#define FLAT_USER_DS   FLAT_USER_DS64
+#define FLAT_USER_CS64 FLAT_RING3_CS64
+#define FLAT_USER_CS32 FLAT_RING3_CS32
+#define FLAT_USER_CS   FLAT_USER_CS64
+#define FLAT_USER_SS64 FLAT_RING3_SS64
+#define FLAT_USER_SS32 FLAT_RING3_SS32
+#define FLAT_USER_SS   FLAT_USER_SS64
+
+#define __HYPERVISOR_VIRT_START 0xFFFF800000000000
+#define __HYPERVISOR_VIRT_END   0xFFFF880000000000
+#define __MACH2PHYS_VIRT_START  0xFFFF800000000000
+#define __MACH2PHYS_VIRT_END    0xFFFF804000000000
+
+#ifndef HYPERVISOR_VIRT_START
+#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
+#define HYPERVISOR_VIRT_END   mk_unsigned_long(__HYPERVISOR_VIRT_END)
+#endif
+
+#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
+#ifndef machine_to_phys_mapping
+#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
+#endif
+
+/*
+ * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
+ *  @which == SEGBASE_*  ;  @base == 64-bit base address
+ * Returns 0 on success.
+ */
+#define SEGBASE_FS          0
+#define SEGBASE_GS_USER     1
+#define SEGBASE_GS_KERNEL   2
+#define SEGBASE_GS_USER_SEL 3 /* Set user %gs specified in base[15:0] */
+
+/*
+ * int HYPERVISOR_iret(void)
+ * All arguments are on the kernel stack, in the following format.
+ * Never returns if successful. Current kernel context is lost.
+ * The saved CS is mapped as follows:
+ *   RING0 -> RING3 kernel mode.
+ *   RING1 -> RING3 kernel mode.
+ *   RING2 -> RING3 kernel mode.
+ *   RING3 -> RING3 user mode.
+ * However RING0 indicates that the guest kernel should return to iteself
+ * directly with
+ *      orb   $3,1*8(%rsp)
+ *      iretq
+ * If flags contains VGCF_in_syscall:
+ *   Restore RAX, RIP, RFLAGS, RSP.
+ *   Discard R11, RCX, CS, SS.
+ * Otherwise:
+ *   Restore RAX, R11, RCX, CS:RIP, RFLAGS, SS:RSP.
+ * All other registers are saved on hypercall entry and restored to user.
+ */
+/* Guest exited in SYSCALL context? Return to guest with SYSRET? */
+#define _VGCF_in_syscall 8
+#define VGCF_in_syscall  (1<<_VGCF_in_syscall)
+#define VGCF_IN_SYSCALL  VGCF_in_syscall
+
+#ifndef __ASSEMBLY__
+
+struct iret_context {
+    /* Top of stack (%rsp at point of hypercall). */
+    uint64_t rax, r11, rcx, flags, rip, cs, rflags, rsp, ss;
+    /* Bottom of iret stack frame. */
+};
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+/* Anonymous union includes both 32- and 64-bit names (e.g., eax/rax). */
+#define __DECL_REG(name) union { \
+    uint64_t r ## name, e ## name; \
+    uint32_t _e ## name; \
+}
+#else
+/* Non-gcc sources must always use the proper 64-bit name (e.g., rax). */
+#define __DECL_REG(name) uint64_t r ## name
+#endif
+
+struct cpu_user_regs {
+    uint64_t r15;
+    uint64_t r14;
+    uint64_t r13;
+    uint64_t r12;
+    __DECL_REG(bp);
+    __DECL_REG(bx);
+    uint64_t r11;
+    uint64_t r10;
+    uint64_t r9;
+    uint64_t r8;
+    __DECL_REG(ax);
+    __DECL_REG(cx);
+    __DECL_REG(dx);
+    __DECL_REG(si);
+    __DECL_REG(di);
+    uint32_t error_code;    /* private */
+    uint32_t entry_vector;  /* private */
+    __DECL_REG(ip);
+    uint16_t cs, _pad0[1];
+    uint8_t  saved_upcall_mask;
+    uint8_t  _pad1[3];
+    __DECL_REG(flags);      /* rflags.IF == !saved_upcall_mask */
+    __DECL_REG(sp);
+    uint16_t ss, _pad2[3];
+    uint16_t es, _pad3[3];
+    uint16_t ds, _pad4[3];
+    uint16_t fs, _pad5[3]; /* Non-zero => takes precedence over fs_base.     */
+    uint16_t gs, _pad6[3]; /* Non-zero => takes precedence over gs_base_usr. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(cpu_user_regs);
+
+#undef __DECL_REG
+
+#define xen_pfn_to_cr3(pfn) ((unsigned long)(pfn) << 12)
+#define xen_cr3_to_pfn(cr3) ((unsigned long)(cr3) >> 12)
+
+struct arch_vcpu_info {
+    unsigned long cr2;
+    unsigned long pad; /* sizeof(vcpu_info_t) == 64 */
+};
+
+typedef unsigned long xen_callback_t;
+
+#define XEN_CALLBACK(__cs, __rip)				\
+	((unsigned long)(__rip))
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif	/* __ASM_X86_XEN_INTERFACE_64_H */
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index 377c04591c15..7b3835d3b77d 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -124,7 +124,7 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn)
 
 static inline unsigned long pte_mfn(pte_t pte)
 {
-	return (pte.pte & PTE_MASK) >> PAGE_SHIFT;
+	return (pte.pte & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
 static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
@@ -148,13 +148,17 @@ static inline pte_t __pte_ma(pteval_t x)
 }
 
 #define pmd_val_ma(v) ((v).pmd)
+#ifdef __PAGETABLE_PUD_FOLDED
 #define pud_val_ma(v) ((v).pgd.pgd)
+#else
+#define pud_val_ma(v) ((v).pud)
+#endif
 #define __pmd_ma(x)	((pmd_t) { (x) } )
 
 #define pgd_val_ma(x)	((x).pgd)
 
 
-xmaddr_t arbitrary_virt_to_machine(unsigned long address);
+xmaddr_t arbitrary_virt_to_machine(void *address);
 void make_lowmem_page_readonly(void *vaddr);
 void make_lowmem_page_readwrite(void *vaddr);
 
diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h
index 3c7d537dd15d..51882ae3db4d 100644
--- a/include/asm-xtensa/dma-mapping.h
+++ b/include/asm-xtensa/dma-mapping.h
@@ -139,7 +139,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
 		consistent_sync(sg_virt(sg), sg->length, dir);
 }
 static inline int
-dma_mapping_error(dma_addr_t dma_addr)
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/include/asm-xtensa/ide.h b/include/asm-xtensa/ide.h
deleted file mode 100644
index 6b912742a42d..000000000000
--- a/include/asm-xtensa/ide.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-xtensa/ide.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 - 1996  Linus Torvalds & authors
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_IDE_H
-#define _XTENSA_IDE_H
-
-#ifdef __KERNEL__
-
-
-#ifndef MAX_HWIFS
-# define MAX_HWIFS	1
-#endif
-
-static __inline__ int ide_default_irq(unsigned long base)
-{
-	/* Unsupported! */
-  	return 0;
-}
-
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-	/* Unsupported! */
-  	return 0;
-}
-
-#endif	/* __KERNEL__ */
-#endif	/* _XTENSA_IDE_H */
diff --git a/include/asm-xtensa/kvm.h b/include/asm-xtensa/kvm.h
deleted file mode 100644
index bda4e331e98c..000000000000
--- a/include/asm-xtensa/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_XTENSA_H
-#define __LINUX_KVM_XTENSA_H
-
-/* xtensa does not support KVM */
-
-#endif
diff --git a/include/asm-xtensa/namei.h b/include/asm-xtensa/namei.h
deleted file mode 100644
index 3fdff039d27d..000000000000
--- a/include/asm-xtensa/namei.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-xtensa/namei.h
- *
- * Included from linux/fs/namei.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_NAMEI_H
-#define _XTENSA_NAMEI_H
-
-#ifdef __KERNEL__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif	/* __KERNEL__ */
-#endif	/* _XTENSA_NAMEI_H */
diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h
index 80a6ae0dd259..11f7dc2dbec7 100644
--- a/include/asm-xtensa/page.h
+++ b/include/asm-xtensa/page.h
@@ -26,13 +26,11 @@
 
 /*
  * PAGE_SHIFT determines the page size
- * PAGE_ALIGN(x) aligns the pointer to the (next) page boundary
  */
 
 #define PAGE_SHIFT		12
 #define PAGE_SIZE		(__XTENSA_UL_CONST(1) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
-#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE - 1) & PAGE_MASK)
 
 #define PAGE_OFFSET		XCHAL_KSEG_CACHED_VADDR
 #define MAX_MEM_PFN		XCHAL_KSEG_SIZE
diff --git a/include/asm-xtensa/ptrace.h b/include/asm-xtensa/ptrace.h
index 422c73e26937..089b0db44816 100644
--- a/include/asm-xtensa/ptrace.h
+++ b/include/asm-xtensa/ptrace.h
@@ -73,10 +73,10 @@
 #define PTRACE_GETXTREGS	18
 #define PTRACE_SETXTREGS	19
 
-#ifndef __ASSEMBLY__
-
 #ifdef __KERNEL__
 
+#ifndef __ASSEMBLY__
+
 /*
  * This struct defines the way the registers are stored on the
  * kernel stack during a system call or other kernel entry.
@@ -122,14 +122,14 @@ extern void show_regs(struct pt_regs *);
 # ifndef CONFIG_SMP
 #  define profile_pc(regs) instruction_pointer(regs)
 # endif
-#endif /* __KERNEL__ */
 
 #else	/* __ASSEMBLY__ */
 
-#ifdef __KERNEL__
 # include <asm/asm-offsets.h>
 #define PT_REGS_OFFSET	  (KERNEL_STACK_SIZE - PT_USER_SIZE)
-#endif
 
 #endif	/* !__ASSEMBLY__ */
+
+#endif  /* __KERNEL__ */
+
 #endif	/* _XTENSA_PTRACE_H */
diff --git a/include/asm-xtensa/semaphore.h b/include/asm-xtensa/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-xtensa/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-xtensa/thread_info.h b/include/asm-xtensa/thread_info.h
index a2c640682ed9..7e4131dd546c 100644
--- a/include/asm-xtensa/thread_info.h
+++ b/include/asm-xtensa/thread_info.h
@@ -111,10 +111,6 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
 #else /* !__ASSEMBLY__ */
 
 /* how to get the thread information struct from ASM */
@@ -160,6 +156,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TS_USEDFPU		0x0001	/* FPU was used by this task this quantum (SMP) */
 
 #define THREAD_SIZE 8192	//(2*PAGE_SIZE)
+#define THREAD_SIZE_ORDER 1
 
 #endif	/* __KERNEL__ */
 #endif	/* _XTENSA_THREAD_INFO */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 71d70d1fbce2..a26f565e8189 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -97,6 +97,7 @@ header-y += ioctl.h
 header-y += ip6_tunnel.h
 header-y += ipmi_msgdefs.h
 header-y += ipsec.h
+header-y += ip_vs.h
 header-y += ipx.h
 header-y += irda.h
 header-y += iso_fs.h
@@ -189,7 +190,6 @@ unifdef-y += connector.h
 unifdef-y += cuda.h
 unifdef-y += cyclades.h
 unifdef-y += dccp.h
-unifdef-y += dirent.h
 unifdef-y += dlm.h
 unifdef-y += dlm_plock.h
 unifdef-y += edd.h
@@ -256,7 +256,9 @@ unifdef-y += kd.h
 unifdef-y += kernelcapi.h
 unifdef-y += kernel.h
 unifdef-y += keyboard.h
+ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 unifdef-y += kvm.h
+endif
 unifdef-y += llc.h
 unifdef-y += loop.h
 unifdef-y += lp.h
diff --git a/include/linux/acct.h b/include/linux/acct.h
index e8cae54e8d88..882dc7248766 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -120,17 +120,20 @@ struct acct_v3
 struct vfsmount;
 struct super_block;
 struct pacct_struct;
+struct pid_namespace;
 extern void acct_auto_close_mnt(struct vfsmount *m);
 extern void acct_auto_close(struct super_block *sb);
 extern void acct_init_pacct(struct pacct_struct *pacct);
 extern void acct_collect(long exitcode, int group_dead);
 extern void acct_process(void);
+extern void acct_exit_ns(struct pid_namespace *);
 #else
 #define acct_auto_close_mnt(x)	do { } while (0)
 #define acct_auto_close(x)	do { } while (0)
 #define acct_init_pacct(x)	do { } while (0)
 #define acct_collect(x,y)	do { } while (0)
 #define acct_process()		do { } while (0)
+#define acct_exit_ns(ns)	do { } while (0)
 #endif
 
 /*
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index a17177639376..702f79dad16a 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -236,6 +236,7 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n,
 		      const char *name);
 
 #ifdef CONFIG_PM_SLEEP
+void __init acpi_no_s4_hw_signature(void);
 void __init acpi_old_suspend_ordering(void);
 #endif /* CONFIG_PM_SLEEP */
 #else	/* CONFIG_ACPI */
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b51ddd28444e..09b276c35227 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -7,7 +7,6 @@
 #include <linux/uio.h>
 
 #include <asm/atomic.h>
-#include <linux/uio.h>
 
 #define AIO_MAXSEGS		4
 #define AIO_KIOGRP_NR_ATOMIC	8
diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h
index 6129e58ca7c9..e0a0cdc2da43 100644
--- a/include/linux/anon_inodes.h
+++ b/include/linux/anon_inodes.h
@@ -9,7 +9,7 @@
 #define _LINUX_ANON_INODES_H
 
 int anon_inode_getfd(const char *name, const struct file_operations *fops,
-		     void *priv);
+		     void *priv, int flags);
 
 #endif /* _LINUX_ANON_INODES_H */
 
diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h
index eb640f0acfac..0f50d4cc4360 100644
--- a/include/linux/async_tx.h
+++ b/include/linux/async_tx.h
@@ -101,21 +101,14 @@ async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
 
 /**
  * async_tx_sync_epilog - actions to take if an operation is run synchronously
- * @flags: async_tx flags
- * @depend_tx: transaction depends on depend_tx
  * @cb_fn: function to call when the transaction completes
  * @cb_fn_param: parameter to pass to the callback routine
  */
 static inline void
-async_tx_sync_epilog(unsigned long flags,
-	struct dma_async_tx_descriptor *depend_tx,
-	dma_async_tx_callback cb_fn, void *cb_fn_param)
+async_tx_sync_epilog(dma_async_tx_callback cb_fn, void *cb_fn_param)
 {
 	if (cb_fn)
 		cb_fn(cb_fn_param);
-
-	if (depend_tx && (flags & ASYNC_TX_DEP_ACK))
-		async_tx_ack(depend_tx);
 }
 
 void
@@ -152,4 +145,6 @@ struct dma_async_tx_descriptor *
 async_trigger_callback(enum async_tx_flags flags,
 	struct dma_async_tx_descriptor *depend_tx,
 	dma_async_tx_callback cb_fn, void *cb_fn_param);
+
+void async_tx_quiesce(struct dma_async_tx_descriptor **tx);
 #endif /* _ASYNC_TX_H_ */
diff --git a/include/linux/atmel-pwm-bl.h b/include/linux/atmel-pwm-bl.h
new file mode 100644
index 000000000000..0153a47806c2
--- /dev/null
+++ b/include/linux/atmel-pwm-bl.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_ATMEL_PWM_BL_H
+#define __INCLUDE_ATMEL_PWM_BL_H
+
+/**
+ * struct atmel_pwm_bl_platform_data
+ * @pwm_channel: which PWM channel in the PWM module to use.
+ * @pwm_frequency: PWM frequency to generate, the driver will try to be as
+ *	close as the prescaler allows.
+ * @pwm_compare_max: value to use in the PWM channel compare register.
+ * @pwm_duty_max: maximum duty cycle value, must be less than or equal to
+ *	pwm_compare_max.
+ * @pwm_duty_min: minimum duty cycle value, must be less than pwm_duty_max.
+ * @pwm_active_low: set to one if the low part of the PWM signal increases the
+ *	brightness of the backlight.
+ * @gpio_on: GPIO line to control the backlight on/off, set to -1 if not used.
+ * @on_active_low: set to one if the on/off signal is on when GPIO is low.
+ *
+ * This struct must be added to the platform device in the board code. It is
+ * used by the atmel-pwm-bl driver to setup the GPIO to control on/off and the
+ * PWM device.
+ */
+struct atmel_pwm_bl_platform_data {
+	unsigned int pwm_channel;
+	unsigned int pwm_frequency;
+	unsigned int pwm_compare_max;
+	unsigned int pwm_duty_max;
+	unsigned int pwm_duty_min;
+	unsigned int pwm_active_low;
+	int gpio_on;
+	unsigned int on_active_low;
+};
+
+#endif /* __INCLUDE_ATMEL_PWM_BL_H */
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 8b82974bdc12..6272a395d43c 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -286,7 +286,6 @@
 #define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_SPARC	(EM_SPARC)
 #define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_V850		(EM_V850|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 
 #define AUDIT_PERM_EXEC		1
diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h
index 31a29541b504..b785c6f8644d 100644
--- a/include/linux/auto_fs4.h
+++ b/include/linux/auto_fs4.h
@@ -98,8 +98,6 @@ union autofs_v5_packet_union {
 #define AUTOFS_IOC_EXPIRE_INDIRECT	AUTOFS_IOC_EXPIRE_MULTI
 #define AUTOFS_IOC_EXPIRE_DIRECT	AUTOFS_IOC_EXPIRE_MULTI
 #define AUTOFS_IOC_PROTOSUBVER		_IOR(0x93,0x67,int)
-#define AUTOFS_IOC_ASKREGHOST           _IOR(0x93,0x68,int)
-#define AUTOFS_IOC_TOGGLEREGHOST        _IOR(0x93,0x69,int)
 #define AUTOFS_IOC_ASKUMOUNT		_IOR(0x93,0x70,int)
 
 
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index ad895455ab72..d7afa9dd6635 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -26,8 +26,14 @@
 
 #define AT_SECURE 23   /* secure mode boolean */
 
+#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
+				 * differ from AT_PLATFORM. */
+
+#define AT_EXECFN  31	/* filename of program */
+
 #ifdef __KERNEL__
-#define AT_VECTOR_SIZE_BASE (14 + 2) /* NEW_AUX_ENT entries in auxiliary table */
+#define AT_VECTOR_SIZE_BASE 18 /* NEW_AUX_ENT entries in auxiliary table */
+  /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
 #endif
 
 #endif /* _LINUX_AUXVEC_H */
diff --git a/include/linux/bcd.h b/include/linux/bcd.h
index c545308125b0..7ac518e3c152 100644
--- a/include/linux/bcd.h
+++ b/include/linux/bcd.h
@@ -10,8 +10,13 @@
 #ifndef _BCD_H
 #define _BCD_H
 
-#define BCD2BIN(val)	(((val) & 0x0f) + ((val)>>4)*10)
-#define BIN2BCD(val)	((((val)/10)<<4) + (val)%10)
+#include <linux/compiler.h>
+
+unsigned bcd2bin(unsigned char val) __attribute_const__;
+unsigned char bin2bcd(unsigned val) __attribute_const__;
+
+#define BCD2BIN(val)	bcd2bin(val)
+#define BIN2BCD(val)	bin2bcd(val)
 
 /* backwards compat */
 #define BCD_TO_BIN(val) ((val)=BCD2BIN(val))
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index ee0ed48e8348..826f62350805 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -38,7 +38,7 @@ struct linux_binprm{
 		     misc_bang:1;
 	struct file * file;
 	int e_uid, e_gid;
-	kernel_cap_t cap_inheritable, cap_permitted;
+	kernel_cap_t cap_post_exec_permitted;
 	bool cap_effective;
 	void *security;
 	int argc, envc;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 88d68081a0f1..e61f22be4d0e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -655,6 +655,7 @@ extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
 extern void blk_insert_request(struct request_queue *, struct request *, int, void *);
 extern void blk_requeue_request(struct request_queue *, struct request *);
 extern void blk_plug_device(struct request_queue *);
+extern void blk_plug_device_unlocked(struct request_queue *);
 extern int blk_remove_plug(struct request_queue *);
 extern void blk_recount_segments(struct request_queue *, struct bio *);
 extern int scsi_cmd_ioctl(struct file *, struct request_queue *,
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index a1d9b79078ea..652470b687c9 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -28,52 +28,73 @@ extern unsigned long saved_max_pfn;
  * memory pages (including holes) on the node.
  */
 typedef struct bootmem_data {
-	unsigned long node_boot_start;
+	unsigned long node_min_pfn;
 	unsigned long node_low_pfn;
 	void *node_bootmem_map;
-	unsigned long last_offset;
-	unsigned long last_pos;
-	unsigned long last_success;	/* Previous allocation point.  To speed
-					 * up searching */
+	unsigned long last_end_off;
+	unsigned long hint_idx;
 	struct list_head list;
 } bootmem_data_t;
 
+extern bootmem_data_t bootmem_node_data[];
+
 extern unsigned long bootmem_bootmap_pages(unsigned long);
+
+extern unsigned long init_bootmem_node(pg_data_t *pgdat,
+				       unsigned long freepfn,
+				       unsigned long startpfn,
+				       unsigned long endpfn);
 extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
+
+extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
+extern unsigned long free_all_bootmem(void);
+
+extern void free_bootmem_node(pg_data_t *pgdat,
+			      unsigned long addr,
+			      unsigned long size);
 extern void free_bootmem(unsigned long addr, unsigned long size);
-extern void *__alloc_bootmem(unsigned long size,
+
+/*
+ * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
+ * the architecture-specific code should honor this).
+ *
+ * If flags is 0, then the return value is always 0 (success). If
+ * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the
+ * memory already was reserved.
+ */
+#define BOOTMEM_DEFAULT		0
+#define BOOTMEM_EXCLUSIVE	(1<<0)
+
+extern int reserve_bootmem_node(pg_data_t *pgdat,
+				 unsigned long physaddr,
+				 unsigned long size,
+				 int flags);
+#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
+extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags);
+#endif
+
+extern void *__alloc_bootmem_nopanic(unsigned long size,
 			     unsigned long align,
 			     unsigned long goal);
-extern void *__alloc_bootmem_nopanic(unsigned long size,
+extern void *__alloc_bootmem(unsigned long size,
 				     unsigned long align,
 				     unsigned long goal);
 extern void *__alloc_bootmem_low(unsigned long size,
 				 unsigned long align,
 				 unsigned long goal);
+extern void *__alloc_bootmem_node(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
+extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
 extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 				      unsigned long size,
 				      unsigned long align,
 				      unsigned long goal);
-extern void *__alloc_bootmem_core(struct bootmem_data *bdata,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal,
-				  unsigned long limit);
-
-/*
- * flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
- * the architecture-specific code should honor this)
- */
-#define BOOTMEM_DEFAULT		0
-#define BOOTMEM_EXCLUSIVE	(1<<0)
-
 #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
-/*
- * If flags is 0, then the return value is always 0 (success). If
- * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the
- * memory already was reserved.
- */
-extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags);
 #define alloc_bootmem(x) \
 	__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low(x) \
@@ -82,31 +103,6 @@ extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags);
 	__alloc_bootmem(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_low_pages(x) \
 	__alloc_bootmem_low(x, PAGE_SIZE, 0)
-#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
-
-extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
-				   int flags);
-extern unsigned long free_all_bootmem(void);
-extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
-extern void *__alloc_bootmem_node(pg_data_t *pgdat,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal);
-extern unsigned long init_bootmem_node(pg_data_t *pgdat,
-				       unsigned long freepfn,
-				       unsigned long startpfn,
-				       unsigned long endpfn);
-extern int reserve_bootmem_node(pg_data_t *pgdat,
-				 unsigned long physaddr,
-				 unsigned long size,
-				 int flags);
-extern void free_bootmem_node(pg_data_t *pgdat,
-			      unsigned long addr,
-			      unsigned long size);
-extern void *alloc_bootmem_section(unsigned long size,
-				   unsigned long section_nr);
-
-#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
 #define alloc_bootmem_node(pgdat, x) \
 	__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_pages_node(pgdat, x) \
@@ -115,6 +111,12 @@ extern void *alloc_bootmem_section(unsigned long size,
 	__alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0)
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
+extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
+				   int flags);
+
+extern void *alloc_bootmem_section(unsigned long size,
+				   unsigned long section_nr);
+
 #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP
 extern void *alloc_remap(int nid, unsigned long size);
 #else
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
new file mode 100644
index 000000000000..9b64b6d67873
--- /dev/null
+++ b/include/linux/brcmphy.h
@@ -0,0 +1,6 @@
+#define PHY_BRCM_WIRESPEED_ENABLE	0x00000001
+#define PHY_BRCM_AUTO_PWRDWN_ENABLE	0x00000002
+#define PHY_BRCM_APD_CLK125_ENABLE	0x00000004
+#define PHY_BRCM_STD_IBND_DISABLE	0x00000008
+#define PHY_BRCM_EXT_IBND_RX_ENABLE	0x00000010
+#define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00000020
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 82aa36c53ea7..eadaab44015f 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -115,7 +115,6 @@ BUFFER_FNS(Uptodate, uptodate)
 BUFFER_FNS(Dirty, dirty)
 TAS_BUFFER_FNS(Dirty, dirty)
 BUFFER_FNS(Lock, locked)
-TAS_BUFFER_FNS(Lock, locked)
 BUFFER_FNS(Req, req)
 TAS_BUFFER_FNS(Req, req)
 BUFFER_FNS(Mapped, mapped)
@@ -205,6 +204,8 @@ void block_invalidatepage(struct page *page, unsigned long offset);
 int block_write_full_page(struct page *page, get_block_t *get_block,
 				struct writeback_control *wbc);
 int block_read_full_page(struct page*, get_block_t*);
+int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
+				unsigned long from);
 int block_write_begin(struct file *, struct address_space *,
 				loff_t, unsigned, unsigned,
 				struct page **, void **, get_block_t*);
@@ -319,10 +320,15 @@ static inline void wait_on_buffer(struct buffer_head *bh)
 		__wait_on_buffer(bh);
 }
 
+static inline int trylock_buffer(struct buffer_head *bh)
+{
+	return likely(!test_and_set_bit(BH_Lock, &bh->b_state));
+}
+
 static inline void lock_buffer(struct buffer_head *bh)
 {
 	might_sleep();
-	if (test_set_buffer_locked(bh))
+	if (!trylock_buffer(bh))
 		__lock_buffer(bh);
 }
 
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index 961ed4b48d8e..44f95b92393b 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -94,12 +94,12 @@ static inline __u16 __be16_to_cpup(const __be16 *p)
 #define __le32_to_cpus(x) __swab32s((x))
 #define __cpu_to_le16s(x) __swab16s((x))
 #define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do {} while (0)
-#define __be64_to_cpus(x) do {} while (0)
-#define __cpu_to_be32s(x) do {} while (0)
-#define __be32_to_cpus(x) do {} while (0)
-#define __cpu_to_be16s(x) do {} while (0)
-#define __be16_to_cpus(x) do {} while (0)
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
 
 #ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index 05dc7c35b3b2..4cc170a31762 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -88,12 +88,12 @@ static inline __u16 __be16_to_cpup(const __be16 *p)
 {
 	return __swab16p((__u16 *)p);
 }
-#define __cpu_to_le64s(x) do {} while (0)
-#define __le64_to_cpus(x) do {} while (0)
-#define __cpu_to_le32s(x) do {} while (0)
-#define __le32_to_cpus(x) do {} while (0)
-#define __cpu_to_le16s(x) do {} while (0)
-#define __le16_to_cpus(x) do {} while (0)
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
 #define __cpu_to_be64s(x) __swab64s((x))
 #define __be64_to_cpus(x) __swab64s((x))
 #define __cpu_to_be32s(x) __swab32s((x))
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e155aa78d859..c98dd7cb7076 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -21,11 +21,13 @@
 struct cgroupfs_root;
 struct cgroup_subsys;
 struct inode;
+struct cgroup;
 
 extern int cgroup_init_early(void);
 extern int cgroup_init(void);
 extern void cgroup_init_smp(void);
 extern void cgroup_lock(void);
+extern bool cgroup_lock_live_group(struct cgroup *cgrp);
 extern void cgroup_unlock(void);
 extern void cgroup_fork(struct task_struct *p);
 extern void cgroup_fork_callbacks(struct task_struct *p);
@@ -205,50 +207,64 @@ struct cftype {
 	 * subsystem, followed by a period */
 	char name[MAX_CFTYPE_NAME];
 	int private;
-	int (*open) (struct inode *inode, struct file *file);
-	ssize_t (*read) (struct cgroup *cgrp, struct cftype *cft,
-			 struct file *file,
-			 char __user *buf, size_t nbytes, loff_t *ppos);
+
+	/*
+	 * If non-zero, defines the maximum length of string that can
+	 * be passed to write_string; defaults to 64
+	 */
+	size_t max_write_len;
+
+	int (*open)(struct inode *inode, struct file *file);
+	ssize_t (*read)(struct cgroup *cgrp, struct cftype *cft,
+			struct file *file,
+			char __user *buf, size_t nbytes, loff_t *ppos);
 	/*
 	 * read_u64() is a shortcut for the common case of returning a
 	 * single integer. Use it in place of read()
 	 */
-	u64 (*read_u64) (struct cgroup *cgrp, struct cftype *cft);
+	u64 (*read_u64)(struct cgroup *cgrp, struct cftype *cft);
 	/*
 	 * read_s64() is a signed version of read_u64()
 	 */
-	s64 (*read_s64) (struct cgroup *cgrp, struct cftype *cft);
+	s64 (*read_s64)(struct cgroup *cgrp, struct cftype *cft);
 	/*
 	 * read_map() is used for defining a map of key/value
 	 * pairs. It should call cb->fill(cb, key, value) for each
 	 * entry. The key/value pairs (and their ordering) should not
 	 * change between reboots.
 	 */
-	int (*read_map) (struct cgroup *cont, struct cftype *cft,
-			 struct cgroup_map_cb *cb);
+	int (*read_map)(struct cgroup *cont, struct cftype *cft,
+			struct cgroup_map_cb *cb);
 	/*
 	 * read_seq_string() is used for outputting a simple sequence
 	 * using seqfile.
 	 */
-	int (*read_seq_string) (struct cgroup *cont, struct cftype *cft,
-			 struct seq_file *m);
+	int (*read_seq_string)(struct cgroup *cont, struct cftype *cft,
+			       struct seq_file *m);
 
-	ssize_t (*write) (struct cgroup *cgrp, struct cftype *cft,
-			  struct file *file,
-			  const char __user *buf, size_t nbytes, loff_t *ppos);
+	ssize_t (*write)(struct cgroup *cgrp, struct cftype *cft,
+			 struct file *file,
+			 const char __user *buf, size_t nbytes, loff_t *ppos);
 
 	/*
 	 * write_u64() is a shortcut for the common case of accepting
 	 * a single integer (as parsed by simple_strtoull) from
 	 * userspace. Use in place of write(); return 0 or error.
 	 */
-	int (*write_u64) (struct cgroup *cgrp, struct cftype *cft, u64 val);
+	int (*write_u64)(struct cgroup *cgrp, struct cftype *cft, u64 val);
 	/*
 	 * write_s64() is a signed version of write_u64()
 	 */
-	int (*write_s64) (struct cgroup *cgrp, struct cftype *cft, s64 val);
+	int (*write_s64)(struct cgroup *cgrp, struct cftype *cft, s64 val);
 
 	/*
+	 * write_string() is passed a nul-terminated kernelspace
+	 * buffer of maximum length determined by max_write_len.
+	 * Returns 0 or -ve error code.
+	 */
+	int (*write_string)(struct cgroup *cgrp, struct cftype *cft,
+			    const char *buffer);
+	/*
 	 * trigger() callback can be used to get some kick from the
 	 * userspace, when the actual string written is not important
 	 * at all. The private field can be used to determine the
@@ -256,7 +272,7 @@ struct cftype {
 	 */
 	int (*trigger)(struct cgroup *cgrp, unsigned int event);
 
-	int (*release) (struct inode *inode, struct file *file);
+	int (*release)(struct inode *inode, struct file *file);
 };
 
 struct cgroup_scanner {
@@ -348,7 +364,8 @@ static inline struct cgroup* task_cgroup(struct task_struct *task,
 	return task_subsys_state(task, subsys_id)->cgroup;
 }
 
-int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *ss);
+int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *ss,
+							char *nodename);
 
 /* A cgroup_iter should be treated as an opaque object */
 struct cgroup_iter {
diff --git a/include/linux/coda.h b/include/linux/coda.h
index b5cf0780c51a..96c87693800b 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -199,28 +199,6 @@ typedef u_int32_t vuid_t;
 typedef u_int32_t vgid_t;
 #endif /*_VUID_T_ */
 
-#ifdef CONFIG_CODA_FS_OLD_API
-struct CodaFid {
-	u_int32_t opaque[3];
-};
-
-static __inline__ ino_t  coda_f2i(struct CodaFid *fid)
-{
-	if ( ! fid ) 
-		return 0; 
-	if (fid->opaque[1] == 0xfffffffe || fid->opaque[1] == 0xffffffff)
-		return ((fid->opaque[0] << 20) | (fid->opaque[2] & 0xfffff));
-	else
-		return (fid->opaque[2] + (fid->opaque[1]<<10) + (fid->opaque[0]<<20));
-}
-
-struct coda_cred {
-    vuid_t cr_uid, cr_euid, cr_suid, cr_fsuid; /* Real, efftve, set, fs uid*/
-    vgid_t cr_groupid, cr_egid, cr_sgid, cr_fsgid; /* same for groups */
-};
-
-#else /* not defined(CONFIG_CODA_FS_OLD_API) */
-
 struct CodaFid {
 	u_int32_t opaque[4];
 };
@@ -228,8 +206,6 @@ struct CodaFid {
 #define coda_f2i(fid)\
 	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
 
-#endif
-
 #ifndef _VENUS_VATTR_T_
 #define _VENUS_VATTR_T_
 /*
@@ -313,15 +289,7 @@ struct coda_statfs {
 
 #define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
 
-#if 0
-#define CODA_KERNEL_VERSION 0 /* don't care about kernel version number */
-#define CODA_KERNEL_VERSION 1 /* The old venus 4.6 compatible interface */
-#endif
-#ifdef CONFIG_CODA_FS_OLD_API
-#define CODA_KERNEL_VERSION 2 /* venus_lookup got an extra parameter */
-#else
 #define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-#endif
 
 /*
  *        Venus <-> Coda  RPC arguments
@@ -329,16 +297,9 @@ struct coda_statfs {
 struct coda_in_hdr {
     u_int32_t opcode;
     u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
-#ifdef CONFIG_CODA_FS_OLD_API
-    u_int16_t pid;	    /* Common to all */
-    u_int16_t pgid;	    /* Common to all */
-    u_int16_t sid;          /* Common to all */
-    struct coda_cred cred;  /* Common to all */
-#else
     pid_t pid;
     pid_t pgid;
     vuid_t uid;
-#endif
 };
 
 /* Really important that opcode and unique are 1st two fields! */
@@ -613,11 +574,7 @@ struct coda_vget_out {
 /* CODA_PURGEUSER is a venus->kernel call */
 struct coda_purgeuser_out {
     struct coda_out_hdr oh;
-#ifdef CONFIG_CODA_FS_OLD_API
-    struct coda_cred cred;
-#else
     vuid_t uid;
-#endif
 };
 
 /* coda_zapfile: */
diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h
index 31b75311e2ca..dcc228aa335a 100644
--- a/include/linux/coda_linux.h
+++ b/include/linux/coda_linux.h
@@ -37,7 +37,7 @@ extern const struct file_operations coda_ioctl_operations;
 /* operations shared over more than one file */
 int coda_open(struct inode *i, struct file *f);
 int coda_release(struct inode *i, struct file *f);
-int coda_permission(struct inode *inode, int mask, struct nameidata *nd);
+int coda_permission(struct inode *inode, int mask);
 int coda_revalidate_inode(struct dentry *);
 int coda_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 int coda_setattr(struct dentry *, struct iattr *);
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index 0488f937634a..7f627775c947 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -40,6 +40,7 @@
 #include <linux/list.h>
 #include <linux/kref.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
 
 #include <asm/atomic.h>
 
@@ -129,8 +130,25 @@ struct configfs_attribute {
 /*
  * Users often need to create attribute structures for their configurable
  * attributes, containing a configfs_attribute member and function pointers
- * for the show() and store() operations on that attribute. They can use
- * this macro (similar to sysfs' __ATTR) to make defining attributes easier.
+ * for the show() and store() operations on that attribute. If they don't
+ * need anything else on the extended attribute structure, they can use
+ * this macro to define it  The argument _item is the name of the
+ * config_item structure.
+ */
+#define CONFIGFS_ATTR_STRUCT(_item)					\
+struct _item##_attribute {						\
+	struct configfs_attribute attr;					\
+	ssize_t (*show)(struct _item *, char *);			\
+	ssize_t (*store)(struct _item *, const char *, size_t);		\
+}
+
+/*
+ * With the extended attribute structure, users can use this macro
+ * (similar to sysfs' __ATTR) to make defining attributes easier.
+ * An example:
+ * #define MYITEM_ATTR(_name, _mode, _show, _store)	\
+ * struct myitem_attribute childless_attr_##_name =	\
+ *         __CONFIGFS_ATTR(_name, _mode, _show, _store)
  */
 #define __CONFIGFS_ATTR(_name, _mode, _show, _store)			\
 {									\
@@ -142,13 +160,60 @@ struct configfs_attribute {
 	.show	= _show,						\
 	.store	= _store,						\
 }
+/* Here is a readonly version, only requiring a show() operation */
+#define __CONFIGFS_ATTR_RO(_name, _show)				\
+{									\
+	.attr	= {							\
+			.ca_name = __stringify(_name),			\
+			.ca_mode = 0444,				\
+			.ca_owner = THIS_MODULE,			\
+	},								\
+	.show	= _show,						\
+}
+
+/*
+ * With these extended attributes, the simple show_attribute() and
+ * store_attribute() operations need to call the show() and store() of the
+ * attributes.  This is a common pattern, so we provide a macro to define
+ * them.  The argument _item is the name of the config_item structure.
+ * This macro expects the attributes to be named "struct <name>_attribute"
+ * and the function to_<name>() to exist;
+ */
+#define CONFIGFS_ATTR_OPS(_item)					\
+static ssize_t _item##_attr_show(struct config_item *item,		\
+				 struct configfs_attribute *attr,	\
+				 char *page)				\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = 0;						\
+									\
+	if (_item##_attr->show)						\
+		ret = _item##_attr->show(_item, page);			\
+	return ret;							\
+}									\
+static ssize_t _item##_attr_store(struct config_item *item,		\
+				  struct configfs_attribute *attr,	\
+				  const char *page, size_t count)	\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = -EINVAL;						\
+									\
+	if (_item##_attr->store)					\
+		ret = _item##_attr->store(_item, page, count);		\
+	return ret;							\
+}
 
 /*
  * If allow_link() exists, the item can symlink(2) out to other
  * items.  If the item is a group, it may support mkdir(2).
  * Groups supply one of make_group() and make_item().  If the
  * group supports make_group(), one can create group children.  If it
- * supports make_item(), one can create config_item children.  If it has
+ * supports make_item(), one can create config_item children.  make_group()
+ * and make_item() return ERR_PTR() on errors.  If it has
  * default_groups on group->default_groups, it has automatically created
  * group children.  default_groups may coexist alongsize make_group() or
  * make_item(), but if the group wishes to have only default_groups
@@ -165,8 +230,8 @@ struct configfs_item_operations {
 };
 
 struct configfs_group_operations {
-	int (*make_item)(struct config_group *group, const char *name, struct config_item **new_item);
-	int (*make_group)(struct config_group *group, const char *name, struct config_group **new_group);
+	struct config_item *(*make_item)(struct config_group *group, const char *name);
+	struct config_group *(*make_group)(struct config_group *group, const char *name);
 	int (*commit_item)(struct config_item *item);
 	void (*disconnect_notify)(struct config_group *group, struct config_item *item);
 	void (*drop_item)(struct config_group *group, struct config_item *item);
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 96a89d3d6727..5c7f9468f753 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -38,8 +38,9 @@
 #define CN_W1_VAL			0x1
 #define CN_IDX_V86D			0x4
 #define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
 
-#define CN_NETLINK_USERS		5
+#define CN_NETLINK_USERS		6
 
 /*
  * Maximum connector's message size.
diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h
index e2bf7e5db39a..c4811da1338b 100644
--- a/include/linux/consolemap.h
+++ b/include/linux/consolemap.h
@@ -3,6 +3,9 @@
  *
  * Interface between console.c, selection.c  and consolemap.c
  */
+#ifndef __LINUX_CONSOLEMAP_H__
+#define __LINUX_CONSOLEMAP_H__
+
 #define LAT1_MAP 0
 #define GRAF_MAP 1
 #define IBMPC_MAP 2
@@ -10,6 +13,7 @@
 
 #include <linux/types.h>
 
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
 struct vc_data;
 
 extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
@@ -18,3 +22,13 @@ extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
 extern u32 conv_8bit_to_uni(unsigned char c);
 extern int conv_uni_to_8bit(u32 uni);
 void console_map_init(void);
+#else
+#define inverse_translate(conp, glyph, uni) ((uint16_t)glyph)
+#define set_translate(m, vc) ((unsigned short *)NULL)
+#define conv_uni_to_pc(conp, ucs) ((int) (ucs > 0xff ? -1: ucs))
+#define conv_8bit_to_uni(c) ((uint32_t)(c))
+#define conv_uni_to_8bit(c) ((int) ((c) & 0xff))
+#define console_map_init(c) do { ; } while (0)
+#endif /* CONFIG_CONSOLE_TRANSLATIONS */
+
+#endif /* __LINUX_CONSOLEMAP_H__ */
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 7464ba3b4333..d7faf8808497 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -69,10 +69,11 @@ static inline void unregister_cpu_notifier(struct notifier_block *nb)
 #endif
 
 int cpu_up(unsigned int cpu);
-
 extern void cpu_hotplug_init(void);
+extern void cpu_maps_update_begin(void);
+extern void cpu_maps_update_done(void);
 
-#else
+#else	/* CONFIG_SMP */
 
 static inline int register_cpu_notifier(struct notifier_block *nb)
 {
@@ -87,10 +88,16 @@ static inline void cpu_hotplug_init(void)
 {
 }
 
+static inline void cpu_maps_update_begin(void)
+{
+}
+
+static inline void cpu_maps_update_done(void)
+{
+}
+
 #endif /* CONFIG_SMP */
 extern struct sysdev_class cpu_sysdev_class;
-extern void cpu_maps_update_begin(void);
-extern void cpu_maps_update_done(void);
 
 #ifdef CONFIG_HOTPLUG_CPU
 /* Stop CPUs going up and down. */
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index e7e91dbfde0f..6fd5668aa572 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -4,9 +4,6 @@
  *  Copyright (C) 2001 Russell King
  *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
  *            
- *
- * $Id: cpufreq.h,v 1.36 2003/01/20 17:31:48 db Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -109,6 +106,7 @@ struct cpufreq_policy {
 #define CPUFREQ_ADJUST		(0)
 #define CPUFREQ_INCOMPATIBLE	(1)
 #define CPUFREQ_NOTIFY		(2)
+#define CPUFREQ_START		(3)
 
 #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
 #define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index c24875bd9c5b..d3219d73f8e6 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -17,6 +17,20 @@
  * For details of cpus_onto(), see bitmap_onto in lib/bitmap.c.
  * For details of cpus_fold(), see bitmap_fold in lib/bitmap.c.
  *
+ * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+ * Note: The alternate operations with the suffix "_nr" are used
+ *       to limit the range of the loop to nr_cpu_ids instead of
+ *       NR_CPUS when NR_CPUS > 64 for performance reasons.
+ *       If NR_CPUS is <= 64 then most assembler bitmask
+ *       operators execute faster with a constant range, so
+ *       the operator will continue to use NR_CPUS.
+ *
+ *       Another consideration is that nr_cpu_ids is initialized
+ *       to NR_CPUS and isn't lowered until the possible cpus are
+ *       discovered (including any disabled cpus).  So early uses
+ *       will span the entire range of NR_CPUS.
+ * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+ *
  * The available cpumask operations are:
  *
  * void cpu_set(cpu, mask)		turn on bit 'cpu' in mask
@@ -38,18 +52,52 @@
  * int cpus_empty(mask)			Is mask empty (no bits sets)?
  * int cpus_full(mask)			Is mask full (all bits sets)?
  * int cpus_weight(mask)		Hamming weigh - number of set bits
+ * int cpus_weight_nr(mask)		Same using nr_cpu_ids instead of NR_CPUS
  *
  * void cpus_shift_right(dst, src, n)	Shift right
  * void cpus_shift_left(dst, src, n)	Shift left
  *
  * int first_cpu(mask)			Number lowest set bit, or NR_CPUS
  * int next_cpu(cpu, mask)		Next cpu past 'cpu', or NR_CPUS
+ * int next_cpu_nr(cpu, mask)		Next cpu past 'cpu', or nr_cpu_ids
  *
  * cpumask_t cpumask_of_cpu(cpu)	Return cpumask with bit 'cpu' set
+ *					(can be used as an lvalue)
  * CPU_MASK_ALL				Initializer - all bits set
  * CPU_MASK_NONE			Initializer - no bits set
  * unsigned long *cpus_addr(mask)	Array of unsigned long's in mask
  *
+ * CPUMASK_ALLOC kmalloc's a structure that is a composite of many cpumask_t
+ * variables, and CPUMASK_PTR provides pointers to each field.
+ *
+ * The structure should be defined something like this:
+ * struct my_cpumasks {
+ *	cpumask_t mask1;
+ *	cpumask_t mask2;
+ * };
+ *
+ * Usage is then:
+ *	CPUMASK_ALLOC(my_cpumasks);
+ *	CPUMASK_PTR(mask1, my_cpumasks);
+ *	CPUMASK_PTR(mask2, my_cpumasks);
+ *
+ *	--- DO NOT reference cpumask_t pointers until this check ---
+ *	if (my_cpumasks == NULL)
+ *		"kmalloc failed"...
+ *
+ * References are now pointers to the cpumask_t variables (*mask1, ...)
+ *
+ *if NR_CPUS > BITS_PER_LONG
+ *   CPUMASK_ALLOC(m)			Declares and allocates struct m *m =
+ *						kmalloc(sizeof(*m), GFP_KERNEL)
+ *   CPUMASK_FREE(m)			Macro for kfree(m)
+ *else
+ *   CPUMASK_ALLOC(m)			Declares struct m _m, *m = &_m
+ *   CPUMASK_FREE(m)			Nop
+ *endif
+ *   CPUMASK_PTR(v, m)			Declares cpumask_t *v = &(m->v)
+ * ------------------------------------------------------------------------
+ *
  * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing
  * int cpumask_parse_user(ubuf, ulen, mask)	Parse ascii string as cpumask
  * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing
@@ -59,7 +107,8 @@
  * void cpus_onto(dst, orig, relmap)	*dst = orig relative to relmap
  * void cpus_fold(dst, orig, sz)	dst bits = orig bits mod sz
  *
- * for_each_cpu_mask(cpu, mask)		for-loop cpu over mask
+ * for_each_cpu_mask(cpu, mask)		for-loop cpu over mask using NR_CPUS
+ * for_each_cpu_mask_nr(cpu, mask)	for-loop cpu over mask using nr_cpu_ids
  *
  * int num_online_cpus()		Number of online CPUs
  * int num_possible_cpus()		Number of all possible CPUs
@@ -216,33 +265,30 @@ static inline void __cpus_shift_left(cpumask_t *dstp,
 	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
 }
 
-#ifdef CONFIG_SMP
-int __first_cpu(const cpumask_t *srcp);
-#define first_cpu(src) __first_cpu(&(src))
-int __next_cpu(int n, const cpumask_t *srcp);
-#define next_cpu(n, src) __next_cpu((n), &(src))
-#else
-#define first_cpu(src)		({ (void)(src); 0; })
-#define next_cpu(n, src)	({ (void)(src); 1; })
-#endif
+/*
+ * Special-case data structure for "single bit set only" constant CPU masks.
+ *
+ * We pre-generate all the 64 (or 32) possible bit positions, with enough
+ * padding to the left and the right, and return the constant pointer
+ * appropriately offset.
+ */
+extern const unsigned long
+	cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
+
+static inline const cpumask_t *get_cpu_mask(unsigned int cpu)
+{
+	const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
+	p -= cpu / BITS_PER_LONG;
+	return (const cpumask_t *)p;
+}
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-extern cpumask_t *cpumask_of_cpu_map;
-#define cpumask_of_cpu(cpu)    (cpumask_of_cpu_map[cpu])
+/*
+ * In cases where we take the address of the cpumask immediately,
+ * gcc optimizes it out (it's a constant) and there's no huge stack
+ * variable created:
+ */
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
 
-#else
-#define cpumask_of_cpu(cpu)						\
-(*({									\
-	typeof(_unused_cpumask_arg_) m;					\
-	if (sizeof(m) == sizeof(unsigned long)) {			\
-		m.bits[0] = 1UL<<(cpu);					\
-	} else {							\
-		cpus_clear(m);						\
-		cpu_set((cpu), m);					\
-	}								\
-	&m;								\
-}))
-#endif
 
 #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
 
@@ -281,6 +327,15 @@ extern cpumask_t cpu_mask_all;
 
 #define cpus_addr(src) ((src).bits)
 
+#if NR_CPUS > BITS_PER_LONG
+#define	CPUMASK_ALLOC(m)	struct m *m = kmalloc(sizeof(*m), GFP_KERNEL)
+#define	CPUMASK_FREE(m)		kfree(m)
+#else
+#define	CPUMASK_ALLOC(m)	struct m _m, *m = &_m
+#define	CPUMASK_FREE(m)
+#endif
+#define	CPUMASK_PTR(v, m) 	cpumask_t *v = &(m->v)
+
 #define cpumask_scnprintf(buf, len, src) \
 			__cpumask_scnprintf((buf), (len), &(src), NR_CPUS)
 static inline int __cpumask_scnprintf(char *buf, int len,
@@ -343,29 +398,59 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
 	bitmap_fold(dstp->bits, origp->bits, sz, nbits);
 }
 
-#if NR_CPUS > 1
-#define for_each_cpu_mask(cpu, mask)		\
-	for ((cpu) = first_cpu(mask);		\
-		(cpu) < NR_CPUS;		\
-		(cpu) = next_cpu((cpu), (mask)))
-#else /* NR_CPUS == 1 */
-#define for_each_cpu_mask(cpu, mask)		\
+#if NR_CPUS == 1
+
+#define nr_cpu_ids		1
+#define first_cpu(src)		({ (void)(src); 0; })
+#define next_cpu(n, src)	({ (void)(src); 1; })
+#define any_online_cpu(mask)	0
+#define for_each_cpu_mask(cpu, mask)	\
 	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
-#endif /* NR_CPUS */
+
+#else /* NR_CPUS > 1 */
+
+extern int nr_cpu_ids;
+int __first_cpu(const cpumask_t *srcp);
+int __next_cpu(int n, const cpumask_t *srcp);
+int __any_online_cpu(const cpumask_t *mask);
+
+#define first_cpu(src)		__first_cpu(&(src))
+#define next_cpu(n, src)	__next_cpu((n), &(src))
+#define any_online_cpu(mask) __any_online_cpu(&(mask))
+#define for_each_cpu_mask(cpu, mask)			\
+	for ((cpu) = -1;				\
+		(cpu) = next_cpu((cpu), (mask)),	\
+		(cpu) < NR_CPUS; )
+#endif
+
+#if NR_CPUS <= 64
 
 #define next_cpu_nr(n, src)		next_cpu(n, src)
 #define cpus_weight_nr(cpumask)		cpus_weight(cpumask)
 #define for_each_cpu_mask_nr(cpu, mask)	for_each_cpu_mask(cpu, mask)
 
+#else /* NR_CPUS > 64 */
+
+int __next_cpu_nr(int n, const cpumask_t *srcp);
+#define next_cpu_nr(n, src)	__next_cpu_nr((n), &(src))
+#define cpus_weight_nr(cpumask)	__cpus_weight(&(cpumask), nr_cpu_ids)
+#define for_each_cpu_mask_nr(cpu, mask)			\
+	for ((cpu) = -1;				\
+		(cpu) = next_cpu_nr((cpu), (mask)),	\
+		(cpu) < nr_cpu_ids; )
+
+#endif /* NR_CPUS > 64 */
+
 /*
  * The following particular system cpumasks and operations manage
- * possible, present and online cpus.  Each of them is a fixed size
+ * possible, present, active and online cpus.  Each of them is a fixed size
  * bitmap of size NR_CPUS.
  *
  *  #ifdef CONFIG_HOTPLUG_CPU
  *     cpu_possible_map - has bit 'cpu' set iff cpu is populatable
  *     cpu_present_map  - has bit 'cpu' set iff cpu is populated
  *     cpu_online_map   - has bit 'cpu' set iff cpu available to scheduler
+ *     cpu_active_map   - has bit 'cpu' set iff cpu available to migration
  *  #else
  *     cpu_possible_map - has bit 'cpu' set iff cpu is populated
  *     cpu_present_map  - copy of cpu_possible_map
@@ -416,14 +501,16 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
 extern cpumask_t cpu_possible_map;
 extern cpumask_t cpu_online_map;
 extern cpumask_t cpu_present_map;
+extern cpumask_t cpu_active_map;
 
 #if NR_CPUS > 1
-#define num_online_cpus()	cpus_weight(cpu_online_map)
-#define num_possible_cpus()	cpus_weight(cpu_possible_map)
-#define num_present_cpus()	cpus_weight(cpu_present_map)
+#define num_online_cpus()	cpus_weight_nr(cpu_online_map)
+#define num_possible_cpus()	cpus_weight_nr(cpu_possible_map)
+#define num_present_cpus()	cpus_weight_nr(cpu_present_map)
 #define cpu_online(cpu)		cpu_isset((cpu), cpu_online_map)
 #define cpu_possible(cpu)	cpu_isset((cpu), cpu_possible_map)
 #define cpu_present(cpu)	cpu_isset((cpu), cpu_present_map)
+#define cpu_active(cpu)		cpu_isset((cpu), cpu_active_map)
 #else
 #define num_online_cpus()	1
 #define num_possible_cpus()	1
@@ -431,21 +518,13 @@ extern cpumask_t cpu_present_map;
 #define cpu_online(cpu)		((cpu) == 0)
 #define cpu_possible(cpu)	((cpu) == 0)
 #define cpu_present(cpu)	((cpu) == 0)
+#define cpu_active(cpu)		((cpu) == 0)
 #endif
 
 #define cpu_is_offline(cpu)	unlikely(!cpu_online(cpu))
 
-#ifdef CONFIG_SMP
-extern int nr_cpu_ids;
-#define any_online_cpu(mask) __any_online_cpu(&(mask))
-int __any_online_cpu(const cpumask_t *mask);
-#else
-#define nr_cpu_ids			1
-#define any_online_cpu(mask)		0
-#endif
-
-#define for_each_possible_cpu(cpu)  for_each_cpu_mask((cpu), cpu_possible_map)
-#define for_each_online_cpu(cpu)  for_each_cpu_mask((cpu), cpu_online_map)
-#define for_each_present_cpu(cpu) for_each_cpu_mask((cpu), cpu_present_map)
+#define for_each_possible_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_possible_map)
+#define for_each_online_cpu(cpu)   for_each_cpu_mask_nr((cpu), cpu_online_map)
+#define for_each_present_cpu(cpu)  for_each_cpu_mask_nr((cpu), cpu_present_map)
 
 #endif /* __LINUX_CPUMASK_H */
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 038578362b47..e8f450c499b0 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -78,6 +78,8 @@ extern void cpuset_track_online_nodes(void);
 
 extern int current_cpuset_is_being_rebound(void);
 
+extern void rebuild_sched_domains(void);
+
 #else /* !CONFIG_CPUSETS */
 
 static inline int cpuset_init_early(void) { return 0; }
@@ -156,6 +158,11 @@ static inline int current_cpuset_is_being_rebound(void)
 	return 0;
 }
 
+static inline void rebuild_sched_domains(void)
+{
+	partition_sched_domains(0, NULL, NULL);
+}
+
 #endif /* !CONFIG_CPUSETS */
 
 #endif /* _LINUX_CPUSET_H */
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 22c7ac5cd80c..025e4f575103 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -8,7 +8,13 @@
 #include <linux/proc_fs.h>
 
 #define ELFCORE_ADDR_MAX	(-1ULL)
+
+#ifdef CONFIG_PROC_VMCORE
 extern unsigned long long elfcorehdr_addr;
+#else
+static const unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+#endif
+
 extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
 						unsigned long, int);
 extern const struct file_operations proc_vmcore_operations;
@@ -22,5 +28,13 @@ extern struct proc_dir_entry *proc_vmcore;
 
 #define vmcore_elf_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
 
+static inline int is_kdump_kernel(void)
+{
+	return (elfcorehdr_addr != ELFCORE_ADDR_MAX) ? 1 : 0;
+}
+#else /* !CONFIG_CRASH_DUMP */
+static inline int is_kdump_kernel(void) { return 0; }
 #endif /* CONFIG_CRASH_DUMP */
+
+extern unsigned long saved_max_pfn;
 #endif /* LINUX_CRASHDUMP_H */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 504cb2c3fa9a..2d3d1e04ba92 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -550,11 +550,11 @@ struct cyclades_icount {
 
 struct cyclades_port {
 	int                     magic;
+	struct tty_port		port;
 	struct cyclades_card	*card;
 	int			line;
 	int			flags; 		/* defined in tty.h */
 	int                     type;		/* UART type */
-	struct tty_struct 	*tty;
 	int			read_status_mask;
 	int			ignore_status_mask;
 	int			timeout;
@@ -567,13 +567,8 @@ struct cyclades_port {
 	int			chip_rev;
 	int			custom_divisor;
 	u8			x_char; /* to be pushed out ASAP */
-	int			close_delay;
-	unsigned short		closing_wait;
-	int			count;	/* # of fd on device */
 	int                     breakon;
 	int                     breakoff;
-	int			blocked_open; /* # of blocked opens */
-	unsigned char 		*xmit_buf;
 	int			xmit_head;
 	int			xmit_tail;
 	int			xmit_cnt;
@@ -583,16 +578,14 @@ struct cyclades_port {
 	struct cyclades_monitor	mon;
 	struct cyclades_idle_stats	idle_stats;
 	struct cyclades_icount	icount;
-	wait_queue_head_t       open_wait;
-	wait_queue_head_t       close_wait;
 	struct completion       shutdown_wait;
 	wait_queue_head_t       delta_msr_wait;
 	int throttle;
 };
 
 #define	CLOSING_WAIT_DELAY	30*HZ
-#define CY_CLOSING_WAIT_NONE	65535
-#define CY_CLOSING_WAIT_INF	0
+#define CY_CLOSING_WAIT_NONE	ASYNC_CLOSING_WAIT_NONE
+#define CY_CLOSING_WAIT_INF	ASYNC_CLOSING_WAIT_INF
 
 
 #define CyMAX_CHIPS_PER_CARD	8
diff --git a/include/linux/dca.h b/include/linux/dca.h
index af61cd1f37e9..b00a753eda53 100644
--- a/include/linux/dca.h
+++ b/include/linux/dca.h
@@ -10,6 +10,7 @@ void dca_unregister_notify(struct notifier_block *nb);
 #define DCA_PROVIDER_REMOVE  0x0002
 
 struct dca_provider {
+	struct list_head	node;
 	struct dca_ops		*ops;
 	struct device 		*cd;
 	int			 id;
@@ -18,7 +19,9 @@ struct dca_provider {
 struct dca_ops {
 	int	(*add_requester)    (struct dca_provider *, struct device *);
 	int	(*remove_requester) (struct dca_provider *, struct device *);
-	u8	(*get_tag)	    (struct dca_provider *, int cpu);
+	u8	(*get_tag)	    (struct dca_provider *, struct device *,
+				     int cpu);
+	int	(*dev_managed)      (struct dca_provider *, struct device *);
 };
 
 struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size);
@@ -32,9 +35,11 @@ static inline void *dca_priv(struct dca_provider *dca)
 }
 
 /* Requester API */
+#define DCA_GET_TAG_TWO_ARGS
 int dca_add_requester(struct device *dev);
 int dca_remove_requester(struct device *dev);
 u8 dca_get_tag(int cpu);
+u8 dca3_get_tag(struct device *dev, int cpu);
 
 /* internal stuff */
 int __init dca_sysfs_init(void);
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 98202c672fde..07aa198f19ed 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -230,6 +230,7 @@ extern void d_delete(struct dentry *);
 extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
 extern struct dentry * d_alloc_anon(struct inode *);
 extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
+extern struct dentry * d_add_ci(struct inode *, struct dentry *, struct qstr *);
 extern void shrink_dcache_sb(struct super_block *);
 extern void shrink_dcache_parent(struct dentry *);
 extern void shrink_dcache_for_umount(struct super_block *);
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index aa0737019e37..6080449fbec9 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -364,8 +364,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb)
 /* FIXME: for now we're default to 1 but it should really be 0 */
 #define DCCPF_INITIAL_SEND_NDP_COUNT		1
 
-#define DCCP_NDP_LIMIT 0xFFFFFF
-
 /**
   * struct dccp_minisock - Minimal DCCP connection representation
   *
@@ -437,7 +435,7 @@ extern int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
 			      struct sk_buff *skb);
 
 struct dccp_options_received {
-	u32	dccpor_ndp; /* only 24 bits */
+	u64	dccpor_ndp:48;
 	u32	dccpor_timestamp;
 	u32	dccpor_timestamp_echo;
 	u32	dccpor_elapsed_time;
@@ -533,7 +531,7 @@ struct dccp_sock {
 	__u16				dccps_r_ack_ratio;
 	__u16				dccps_pcslen;
 	__u16				dccps_pcrlen;
-	unsigned long			dccps_ndp_count;
+	__u64				dccps_ndp_count:48;
 	unsigned long			dccps_rate_last;
 	struct dccp_minisock		dccps_minisock;
 	struct dccp_ackvec		*dccps_hc_rx_ackvec;
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 7266124361b4..e1a6c046cea3 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -26,6 +26,8 @@ struct debugfs_blob_wrapper {
 	unsigned long size;
 };
 
+extern struct dentry *arch_debugfs_dir;
+
 #if defined(CONFIG_DEBUG_FS)
 
 /* declared over in file.c */
@@ -42,6 +44,7 @@ struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
 				      const char *dest);
 
 void debugfs_remove(struct dentry *dentry);
+void debugfs_remove_recursive(struct dentry *dentry);
 
 struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
                 struct dentry *new_dir, const char *new_name);
@@ -99,6 +102,9 @@ static inline struct dentry *debugfs_create_symlink(const char *name,
 static inline void debugfs_remove(struct dentry *dentry)
 { }
 
+static inline void debugfs_remove_recursive(struct dentry *dentry)
+{ }
+
 static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
                 struct dentry *new_dir, char *new_name)
 {
diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h
index ab94bc083558..f352f06fa063 100644
--- a/include/linux/delayacct.h
+++ b/include/linux/delayacct.h
@@ -39,6 +39,8 @@ extern void __delayacct_blkio_start(void);
 extern void __delayacct_blkio_end(void);
 extern int __delayacct_add_tsk(struct taskstats *, struct task_struct *);
 extern __u64 __delayacct_blkio_ticks(struct task_struct *);
+extern void __delayacct_freepages_start(void);
+extern void __delayacct_freepages_end(void);
 
 static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
 {
@@ -107,6 +109,18 @@ static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
 	return 0;
 }
 
+static inline void delayacct_freepages_start(void)
+{
+	if (current->delays)
+		__delayacct_freepages_start();
+}
+
+static inline void delayacct_freepages_end(void)
+{
+	if (current->delays)
+		__delayacct_freepages_end();
+}
+
 #else
 static inline void delayacct_set_flag(int flag)
 {}
@@ -129,6 +143,11 @@ static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
 { return 0; }
 static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
 { return 0; }
+static inline void delayacct_freepages_start(void)
+{}
+static inline void delayacct_freepages_end(void)
+{}
+
 #endif /* CONFIG_TASK_DELAY_ACCT */
 
 #endif
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 0d8d419d191a..a90222e3297d 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -9,11 +9,13 @@
 #define _LINUX_DEVICE_MAPPER_H
 
 #include <linux/bio.h>
+#include <linux/blkdev.h>
 
 struct dm_target;
 struct dm_table;
 struct dm_dev;
 struct mapped_device;
+struct bio_vec;
 
 typedef enum { STATUSTYPE_INFO, STATUSTYPE_TABLE } status_type_t;
 
@@ -72,6 +74,9 @@ typedef int (*dm_ioctl_fn) (struct dm_target *ti, struct inode *inode,
 			    struct file *filp, unsigned int cmd,
 			    unsigned long arg);
 
+typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
+			    struct bio_vec *biovec, int max_size);
+
 void dm_error(const char *message);
 
 /*
@@ -107,6 +112,7 @@ struct target_type {
 	dm_status_fn status;
 	dm_message_fn message;
 	dm_ioctl_fn ioctl;
+	dm_merge_fn merge;
 };
 
 struct io_restrictions {
diff --git a/include/linux/device.h b/include/linux/device.h
index f71a78d123ae..d24a47f80f9c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -16,6 +16,7 @@
 #include <linux/kobject.h>
 #include <linux/klist.h>
 #include <linux/list.h>
+#include <linux/lockdep.h>
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/module.h>
@@ -24,17 +25,13 @@
 #include <asm/atomic.h>
 #include <asm/device.h>
 
-#define DEVICE_NAME_SIZE	50
-/* DEVICE_NAME_HALF is really less than half to accommodate slop */
-#define DEVICE_NAME_HALF	__stringify(20)
-#define DEVICE_ID_SIZE		32
-#define BUS_ID_SIZE		KOBJ_NAME_LEN
-
+#define BUS_ID_SIZE		20
 
 struct device;
 struct device_driver;
 struct driver_private;
 struct class;
+struct class_private;
 struct bus_type;
 struct bus_type_private;
 
@@ -186,13 +183,9 @@ struct class {
 	const char		*name;
 	struct module		*owner;
 
-	struct kset		subsys;
-	struct list_head	devices;
-	struct list_head	interfaces;
-	struct kset		class_dirs;
-	struct semaphore	sem; /* locks children, devices, interfaces */
 	struct class_attribute		*class_attrs;
 	struct device_attribute		*dev_attrs;
+	struct kobject			*dev_kobj;
 
 	int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
 
@@ -203,13 +196,28 @@ struct class {
 	int (*resume)(struct device *dev);
 
 	struct pm_ops *pm;
+	struct class_private *p;
 };
 
-extern int __must_check class_register(struct class *class);
+extern struct kobject *sysfs_dev_block_kobj;
+extern struct kobject *sysfs_dev_char_kobj;
+extern int __must_check __class_register(struct class *class,
+					 struct lock_class_key *key);
 extern void class_unregister(struct class *class);
-extern int class_for_each_device(struct class *class, void *data,
+
+/* This is a #define to keep the compiler from merging different
+ * instances of the __key variable */
+#define class_register(class)			\
+({						\
+	static struct lock_class_key __key;	\
+	__class_register(class, &__key);	\
+})
+
+extern int class_for_each_device(struct class *class, struct device *start,
+				 void *data,
 				 int (*fn)(struct device *dev, void *data));
-extern struct device *class_find_device(struct class *class, void *data,
+extern struct device *class_find_device(struct class *class,
+					struct device *start, void *data,
 					int (*match)(struct device *, void *));
 
 struct class_attribute {
@@ -237,9 +245,19 @@ struct class_interface {
 extern int __must_check class_interface_register(struct class_interface *);
 extern void class_interface_unregister(struct class_interface *);
 
-extern struct class *class_create(struct module *owner, const char *name);
+extern struct class * __must_check __class_create(struct module *owner,
+						  const char *name,
+						  struct lock_class_key *key);
 extern void class_destroy(struct class *cls);
 
+/* This is a #define to keep the compiler from merging different
+ * instances of the __key variable */
+#define class_create(owner, name)		\
+({						\
+	static struct lock_class_key __key;	\
+	__class_create(owner, name, &__key);	\
+})
+
 /*
  * The type of device, "struct device" is embedded in. A class
  * or bus can contain devices of different types
@@ -468,14 +486,10 @@ extern struct device *device_create_vargs(struct class *cls,
 					  const char *fmt,
 					  va_list vargs);
 extern struct device *device_create(struct class *cls, struct device *parent,
-				    dev_t devt, const char *fmt, ...)
-				    __attribute__((format(printf, 4, 5)));
-extern struct device *device_create_drvdata(struct class *cls,
-					    struct device *parent,
-					    dev_t devt,
-					    void *drvdata,
-					    const char *fmt, ...)
+				    dev_t devt, void *drvdata,
+				    const char *fmt, ...)
 				    __attribute__((format(printf, 5, 6)));
+#define device_create_drvdata	device_create
 extern void device_destroy(struct class *cls, dev_t devt);
 
 /*
diff --git a/include/linux/dirent.h b/include/linux/dirent.h
index 5d6023b87800..f072fb8d10a3 100644
--- a/include/linux/dirent.h
+++ b/include/linux/dirent.h
@@ -1,23 +1,6 @@
 #ifndef _LINUX_DIRENT_H
 #define _LINUX_DIRENT_H
 
-struct dirent {
-	long		d_ino;
-	__kernel_off_t	d_off;
-	unsigned short	d_reclen;
-	char		d_name[256]; /* We must not include limits.h! */
-};
-
-struct dirent64 {
-	__u64		d_ino;
-	__s64		d_off;
-	unsigned short	d_reclen;
-	unsigned char	d_type;
-	char		d_name[256];
-};
-
-#ifdef __KERNEL__
-
 struct linux_dirent64 {
 	u64		d_ino;
 	s64		d_off;
@@ -26,7 +9,4 @@ struct linux_dirent64 {
 	char		d_name[0];
 };
 
-#endif	/* __KERNEL__ */
-
-
 #endif
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
index b03c41bbfa14..28c2940eb30d 100644
--- a/include/linux/dm-ioctl.h
+++ b/include/linux/dm-ioctl.h
@@ -256,9 +256,9 @@ enum {
 #define DM_DEV_SET_GEOMETRY	_IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
 
 #define DM_VERSION_MAJOR	4
-#define DM_VERSION_MINOR	13
+#define DM_VERSION_MINOR	14
 #define DM_VERSION_PATCHLEVEL	0
-#define DM_VERSION_EXTRA	"-ioctl (2007-10-18)"
+#define DM_VERSION_EXTRA	"-ioctl (2008-04-23)"
 
 /* Status bits */
 #define DM_READONLY_FLAG	(1 << 0) /* In/Out */
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
index a3750462f9e3..c30879cf93bc 100644
--- a/include/linux/dm9000.h
+++ b/include/linux/dm9000.h
@@ -21,11 +21,13 @@
 #define DM9000_PLATF_32BITONLY	(0x0004)
 #define DM9000_PLATF_EXT_PHY	(0x0008)
 #define DM9000_PLATF_NO_EEPROM	(0x0010)
+#define DM9000_PLATF_SIMPLE_PHY (0x0020)  /* Use NSR to find LinkStatus */
 
 /* platfrom data for platfrom device structure's platfrom_data field */
 
 struct dm9000_plat_data {
 	unsigned int	flags;
+	unsigned char	dev_addr[6];
 
 	/* allow replacement IO routines */
 
diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h
index 1677e2bfa00c..71ad34eca6e3 100644
--- a/include/linux/dma-attrs.h
+++ b/include/linux/dma-attrs.h
@@ -12,6 +12,7 @@
  */
 enum dma_attr {
 	DMA_ATTR_WRITE_BARRIER,
+	DMA_ATTR_WEAK_ORDERING,
 	DMA_ATTR_MAX,
 };
 
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index d08a5c5eb928..adb0b084eb5a 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -89,10 +89,23 @@ enum dma_transaction_type {
 	DMA_MEMSET,
 	DMA_MEMCPY_CRC32C,
 	DMA_INTERRUPT,
+	DMA_SLAVE,
 };
 
 /* last transaction type for creation of the capabilities mask */
-#define DMA_TX_TYPE_END (DMA_INTERRUPT + 1)
+#define DMA_TX_TYPE_END (DMA_SLAVE + 1)
+
+/**
+ * enum dma_slave_width - DMA slave register access width.
+ * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum dma_slave_width {
+	DMA_SLAVE_WIDTH_8BIT,
+	DMA_SLAVE_WIDTH_16BIT,
+	DMA_SLAVE_WIDTH_32BIT,
+};
 
 /**
  * enum dma_ctrl_flags - DMA flags to augment operation preparation,
@@ -102,10 +115,14 @@ enum dma_transaction_type {
  * @DMA_CTRL_ACK - the descriptor cannot be reused until the client
  * 	acknowledges receipt, i.e. has has a chance to establish any
  * 	dependency chains
+ * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
+ * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
  */
 enum dma_ctrl_flags {
 	DMA_PREP_INTERRUPT = (1 << 0),
 	DMA_CTRL_ACK = (1 << 1),
+	DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
+	DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
 };
 
 /**
@@ -115,6 +132,32 @@ enum dma_ctrl_flags {
 typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t;
 
 /**
+ * struct dma_slave - Information about a DMA slave
+ * @dev: device acting as DMA slave
+ * @dma_dev: required DMA master device. If non-NULL, the client can not be
+ *	bound to other masters than this.
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ *
+ * If dma_dev is non-NULL, the client can not be bound to other DMA
+ * masters than the one corresponding to this device. The DMA master
+ * driver may use this to determine if there is controller-specific
+ * data wrapped around this struct. Drivers of platform code that sets
+ * the dma_dev field must therefore make sure to use an appropriate
+ * controller-specific dma slave structure wrapping this struct.
+ */
+struct dma_slave {
+	struct device		*dev;
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum dma_slave_width	reg_width;
+};
+
+/**
  * struct dma_chan_percpu - the per-CPU part of struct dma_chan
  * @refcount: local_t used for open-coded "bigref" counting
  * @memcpy_count: transaction counter
@@ -139,6 +182,7 @@ struct dma_chan_percpu {
  * @rcu: the DMA channel's RCU head
  * @device_node: used to add this to the device chan list
  * @local: per-cpu pointer to a struct dma_chan_percpu
+ * @client-count: how many clients are using this channel
  */
 struct dma_chan {
 	struct dma_device *device;
@@ -154,6 +198,7 @@ struct dma_chan {
 
 	struct list_head device_node;
 	struct dma_chan_percpu *local;
+	int client_count;
 };
 
 #define to_dma_chan(p) container_of(p, struct dma_chan, dev)
@@ -202,11 +247,14 @@ typedef enum dma_state_client (*dma_event_callback) (struct dma_client *client,
  * @event_callback: func ptr to call when something happens
  * @cap_mask: only return channels that satisfy the requested capabilities
  *  a value of zero corresponds to any capability
+ * @slave: data for preparing slave transfer. Must be non-NULL iff the
+ *  DMA_SLAVE capability is requested.
  * @global_node: list_head for global dma_client_list
  */
 struct dma_client {
 	dma_event_callback	event_callback;
 	dma_cap_mask_t		cap_mask;
+	struct dma_slave	*slave;
 	struct list_head	global_node;
 };
 
@@ -263,6 +311,8 @@ struct dma_async_tx_descriptor {
  * @device_prep_dma_zero_sum: prepares a zero_sum operation
  * @device_prep_dma_memset: prepares a memset operation
  * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
+ * @device_prep_slave_sg: prepares a slave dma operation
+ * @device_terminate_all: terminate all pending operations
  * @device_issue_pending: push pending transactions to hardware
  */
 struct dma_device {
@@ -279,7 +329,8 @@ struct dma_device {
 	int dev_id;
 	struct device *dev;
 
-	int (*device_alloc_chan_resources)(struct dma_chan *chan);
+	int (*device_alloc_chan_resources)(struct dma_chan *chan,
+			struct dma_client *client);
 	void (*device_free_chan_resources)(struct dma_chan *chan);
 
 	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
@@ -297,6 +348,12 @@ struct dma_device {
 	struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
 		struct dma_chan *chan, unsigned long flags);
 
+	struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned long flags);
+	void (*device_terminate_all)(struct dma_chan *chan);
+
 	enum dma_status (*device_is_tx_complete)(struct dma_chan *chan,
 			dma_cookie_t cookie, dma_cookie_t *last,
 			dma_cookie_t *used);
@@ -318,16 +375,14 @@ dma_cookie_t dma_async_memcpy_pg_to_pg(struct dma_chan *chan,
 void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
 	struct dma_chan *chan);
 
-static inline void
-async_tx_ack(struct dma_async_tx_descriptor *tx)
+static inline void async_tx_ack(struct dma_async_tx_descriptor *tx)
 {
 	tx->flags |= DMA_CTRL_ACK;
 }
 
-static inline int
-async_tx_test_ack(struct dma_async_tx_descriptor *tx)
+static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
 {
-	return tx->flags & DMA_CTRL_ACK;
+	return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
 }
 
 #define first_dma_cap(mask) __first_dma_cap(&(mask))
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
new file mode 100644
index 000000000000..04d217b442bf
--- /dev/null
+++ b/include/linux/dw_dmac.h
@@ -0,0 +1,62 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
+ * AVR32 systems.)
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef DW_DMAC_H
+#define DW_DMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct dw_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ */
+struct dw_dma_platform_data {
+	unsigned int	nr_channels;
+};
+
+/**
+ * struct dw_dma_slave - Controller-specific information about a slave
+ * @slave: Generic information about the slave
+ * @ctl_lo: Platform-specific initializer for the CTL_LO register
+ * @cfg_hi: Platform-specific initializer for the CFG_HI register
+ * @cfg_lo: Platform-specific initializer for the CFG_LO register
+ */
+struct dw_dma_slave {
+	struct dma_slave	slave;
+	u32			cfg_hi;
+	u32			cfg_lo;
+};
+
+/* Platform-configurable bits in CFG_HI */
+#define DWC_CFGH_FCMODE		(1 << 0)
+#define DWC_CFGH_FIFO_MODE	(1 << 1)
+#define DWC_CFGH_PROTCTL(x)	((x) << 2)
+#define DWC_CFGH_SRC_PER(x)	((x) << 7)
+#define DWC_CFGH_DST_PER(x)	((x) << 11)
+
+/* Platform-configurable bits in CFG_LO */
+#define DWC_CFGL_PRIO(x)	((x) << 5)	/* priority */
+#define DWC_CFGL_LOCK_CH_XFER	(0 << 12)	/* scope of LOCK_CH */
+#define DWC_CFGL_LOCK_CH_BLOCK	(1 << 12)
+#define DWC_CFGL_LOCK_CH_XACT	(2 << 12)
+#define DWC_CFGL_LOCK_BUS_XFER	(0 << 14)	/* scope of LOCK_BUS */
+#define DWC_CFGL_LOCK_BUS_BLOCK	(1 << 14)
+#define DWC_CFGL_LOCK_BUS_XACT	(2 << 14)
+#define DWC_CFGL_LOCK_CH	(1 << 15)	/* channel lockout */
+#define DWC_CFGL_LOCK_BUS	(1 << 16)	/* busmaster lockout */
+#define DWC_CFGL_HS_DST_POL	(1 << 18)	/* dst handshake active low */
+#define DWC_CFGL_HS_SRC_POL	(1 << 19)	/* src handshake active low */
+
+static inline struct dw_dma_slave *to_dw_dma_slave(struct dma_slave *slave)
+{
+	return container_of(slave, struct dw_dma_slave, slave);
+}
+
+#endif /* DW_DMAC_H */
diff --git a/include/linux/eisa.h b/include/linux/eisa.h
index fe806b6f030d..e61c0be2a459 100644
--- a/include/linux/eisa.h
+++ b/include/linux/eisa.h
@@ -40,7 +40,7 @@ struct eisa_device {
 	u64                   dma_mask;
 	struct device         dev; /* generic device */
 #ifdef CONFIG_EISA_NAMES
-	char		      pretty_name[DEVICE_NAME_SIZE];
+	char		      pretty_name[50];
 #endif
 };
 
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c8d216357865..b4b038b89ee6 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -27,9 +27,24 @@ struct ethtool_cmd {
 	__u8	autoneg;	/* Enable or disable autonegotiation */
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u32	reserved[4];
+	__u16	speed_hi;
+	__u16	reserved2;
+	__u32	reserved[3];
 };
 
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+						__u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
 #define ETHTOOL_BUSINFO_LEN	32
 /* these strings are set to whatever the driver author decides... */
 struct ethtool_drvinfo {
@@ -272,6 +287,12 @@ enum ethtool_flags {
 	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
 };
 
+struct ethtool_rxnfc {
+	__u32		cmd;
+	__u32		flow_type;
+	__u64		data;
+};
+
 #ifdef __KERNEL__
 
 struct net_device;
@@ -396,6 +417,8 @@ struct ethtool_ops {
 	/* the following hooks are obsolete */
 	int	(*self_test_count)(struct net_device *);/* use get_sset_count */
 	int	(*get_stats_count)(struct net_device *);/* use get_sset_count */
+	int	(*get_rxhash)(struct net_device *, struct ethtool_rxnfc *);
+	int	(*set_rxhash)(struct net_device *, struct ethtool_rxnfc *);
 };
 #endif /* __KERNEL__ */
 
@@ -442,6 +465,9 @@ struct ethtool_ops {
 #define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
 #define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
 
+#define	ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define	ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
 #define SPARC_ETH_SSET		ETHTOOL_SSET
@@ -528,4 +554,26 @@ struct ethtool_ops {
 #define WAKE_MAGIC		(1 << 5)
 #define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
 
+/* L3-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01
+#define	UDP_V4_FLOW	0x02
+#define	SCTP_V4_FLOW	0x03
+#define	AH_ESP_V4_FLOW	0x04
+#define	TCP_V6_FLOW	0x05
+#define	UDP_V6_FLOW	0x06
+#define	SCTP_V6_FLOW	0x07
+#define	AH_ESP_V6_FLOW	0x08
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_DEV_PORT	(1 << 0)
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index a701399b7fed..a667637b54e3 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -10,6 +10,13 @@
 
 #ifdef CONFIG_EVENTFD
 
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/* Flags for eventfd2.  */
+#define EFD_CLOEXEC O_CLOEXEC
+#define EFD_NONBLOCK O_NONBLOCK
+
 struct file *eventfd_fget(int fd);
 int eventfd_signal(struct file *file, int n);
 
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index cf79853967ff..f1e1d3c47125 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -14,8 +14,12 @@
 #ifndef _LINUX_EVENTPOLL_H
 #define _LINUX_EVENTPOLL_H
 
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
 #include <linux/types.h>
 
+/* Flags for epoll_create1.  */
+#define EPOLL_CLOEXEC O_CLOEXEC
 
 /* Valid opcodes to issue to sys_epoll_ctl() */
 #define EPOLL_CTL_ADD 1
diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
index 84cec2aa9f1e..2efe7b863cff 100644
--- a/include/linux/ext2_fs.h
+++ b/include/linux/ext2_fs.h
@@ -284,8 +284,8 @@ struct ext2_inode {
 
 #ifdef	__hurd__
 #define i_translator	osd1.hurd1.h_i_translator
-#define i_frag		osd2.hurd2.h_i_frag;
-#define i_fsize		osd2.hurd2.h_i_fsize;
+#define i_frag		osd2.hurd2.h_i_frag
+#define i_fsize		osd2.hurd2.h_i_fsize
 #define i_uid_high	osd2.hurd2.h_i_uid_high
 #define i_gid_high	osd2.hurd2.h_i_gid_high
 #define i_author	osd2.hurd2.h_i_author
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 36c540396377..80171ee89a22 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -832,6 +832,7 @@ extern void ext3_discard_reservation (struct inode *);
 extern void ext3_dirty_inode(struct inode *);
 extern int ext3_change_inode_journal_flag(struct inode *, int);
 extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *);
+extern int ext3_can_truncate(struct inode *inode);
 extern void ext3_truncate (struct inode *);
 extern void ext3_set_inode_flags(struct inode *);
 extern void ext3_get_inode_flags(struct ext3_inode_info *);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 72295b099228..3b8870e32afd 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -8,7 +8,6 @@ struct dentry;
 
 /* Definitions of frame buffers						*/
 
-#define FB_MAJOR		29
 #define FB_MAX			32	/* sufficient for now */
 
 /* ioctls
@@ -120,6 +119,10 @@ struct dentry;
 #define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
 #define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
 #define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
+#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
+#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
+#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
 #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
 #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
 #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
diff --git a/include/linux/fd1772.h b/include/linux/fd1772.h
deleted file mode 100644
index 871d6e4c677e..000000000000
--- a/include/linux/fd1772.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _LINUX_FD1772REG_H
-#define _LINUX_FD1772REG_H
-
-/*
-** WD1772 stuff - originally from the M68K Linux
- * Modified for Archimedes by Dave Gilbert (gilbertd@cs.man.ac.uk)
- */
-
-/* register codes */
-
-#define FDC1772SELREG_STP   (0x80)   /* command/status register */
-#define FDC1772SELREG_TRA   (0x82)   /* track register */
-#define FDC1772SELREG_SEC   (0x84)   /* sector register */
-#define FDC1772SELREG_DTA   (0x86)   /* data register */
-
-/* register names for FDC1772_READ/WRITE macros */
-
-#define FDC1772REG_CMD         0
-#define FDC1772REG_STATUS      0
-#define FDC1772REG_TRACK       2
-#define FDC1772REG_SECTOR      4
-#define FDC1772REG_DATA                6
-
-/* command opcodes */
-
-#define FDC1772CMD_RESTORE  (0x00)   /*  -                   */
-#define FDC1772CMD_SEEK     (0x10)   /*   |                  */
-#define FDC1772CMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
-#define FDC1772CMD_STIN     (0x40)   /*   |                  */
-#define FDC1772CMD_STOT     (0x60)   /*  -                   */
-#define FDC1772CMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
-#define FDC1772CMD_WRSEC    (0xa0)   /*  -          "        */
-#define FDC1772CMD_RDADR    (0xc0)   /*  -                   */
-#define FDC1772CMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
-#define FDC1772CMD_WRTRA    (0xf0)   /*  -                   */
-#define FDC1772CMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */
-
-/* command modifier bits */
-
-#define FDC1772CMDADD_SR6   (0x00)   /* step rate settings */
-#define FDC1772CMDADD_SR12  (0x01)
-#define FDC1772CMDADD_SR2   (0x02)
-#define FDC1772CMDADD_SR3   (0x03)
-#define FDC1772CMDADD_V     (0x04)   /* verify */
-#define FDC1772CMDADD_H     (0x08)   /* wait for spin-up */
-#define FDC1772CMDADD_U     (0x10)   /* update track register */
-#define FDC1772CMDADD_M     (0x10)   /* multiple sector access */
-#define FDC1772CMDADD_E     (0x04)   /* head settling flag */
-#define FDC1772CMDADD_P     (0x02)   /* precompensation */
-#define FDC1772CMDADD_A0    (0x01)   /* DAM flag */
-
-/* status register bits */
-
-#define        FDC1772STAT_MOTORON     (0x80)   /* motor on */
-#define        FDC1772STAT_WPROT       (0x40)   /* write protected (FDC1772CMD_WR*) */
-#define        FDC1772STAT_SPINUP      (0x20)   /* motor speed stable (Type I) */
-#define        FDC1772STAT_DELDAM      (0x20)   /* sector has deleted DAM (Type II+III) */
-#define        FDC1772STAT_RECNF       (0x10)   /* record not found */
-#define        FDC1772STAT_CRC         (0x08)   /* CRC error */
-#define        FDC1772STAT_TR00        (0x04)   /* Track 00 flag (Type I) */
-#define        FDC1772STAT_LOST        (0x04)   /* Lost Data (Type II+III) */
-#define        FDC1772STAT_IDX         (0x02)   /* Index status (Type I) */
-#define        FDC1772STAT_DRQ         (0x02)   /* DRQ status (Type II+III) */
-#define        FDC1772STAT_BUSY        (0x01)   /* FDC1772 is busy */
-
-
-/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
-#define DSKSIDE     (0x01)
-        
-#define DSKDRVNONE  (0x06)
-#define DSKDRV0     (0x02)
-#define DSKDRV1     (0x04)
-
-/* step rates */
-#define        FDC1772STEP_6   0x00
-#define        FDC1772STEP_12  0x01
-#define        FDC1772STEP_2   0x02
-#define        FDC1772STEP_3   0x03
-
-#endif
diff --git a/include/linux/file.h b/include/linux/file.h
index 27c64bdc68c9..a20259e248a5 100644
--- a/include/linux/file.h
+++ b/include/linux/file.h
@@ -34,8 +34,9 @@ extern struct file *fget(unsigned int fd);
 extern struct file *fget_light(unsigned int fd, int *fput_needed);
 extern void set_close_on_exec(unsigned int fd, int flag);
 extern void put_filp(struct file *);
+extern int alloc_fd(unsigned start, unsigned flags);
 extern int get_unused_fd(void);
-extern int get_unused_fd_flags(int flags);
+#define get_unused_fd_flags(flags) alloc_fd(0, (flags))
 extern void put_unused_fd(unsigned int fd);
 
 extern void fd_install(unsigned int fd, struct file *file);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index c6455dadb21b..580b513668fe 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -60,6 +60,8 @@ extern int dir_notify_enable;
 #define MAY_WRITE 2
 #define MAY_READ 4
 #define MAY_APPEND 8
+#define MAY_ACCESS 16
+#define MAY_OPEN 32
 
 #define FMODE_READ 1
 #define FMODE_WRITE 2
@@ -277,7 +279,7 @@ extern int dir_notify_enable;
 #include <linux/types.h>
 #include <linux/kdev_t.h>
 #include <linux/dcache.h>
-#include <linux/namei.h>
+#include <linux/path.h>
 #include <linux/stat.h>
 #include <linux/cache.h>
 #include <linux/kobject.h>
@@ -318,22 +320,23 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
  * Attribute flags.  These should be or-ed together to figure out what
  * has been changed!
  */
-#define ATTR_MODE	1
-#define ATTR_UID	2
-#define ATTR_GID	4
-#define ATTR_SIZE	8
-#define ATTR_ATIME	16
-#define ATTR_MTIME	32
-#define ATTR_CTIME	64
-#define ATTR_ATIME_SET	128
-#define ATTR_MTIME_SET	256
-#define ATTR_FORCE	512	/* Not a change, but a change it */
-#define ATTR_ATTR_FLAG	1024
-#define ATTR_KILL_SUID	2048
-#define ATTR_KILL_SGID	4096
-#define ATTR_FILE	8192
-#define ATTR_KILL_PRIV	16384
-#define ATTR_OPEN	32768	/* Truncating from open(O_TRUNC) */
+#define ATTR_MODE	(1 << 0)
+#define ATTR_UID	(1 << 1)
+#define ATTR_GID	(1 << 2)
+#define ATTR_SIZE	(1 << 3)
+#define ATTR_ATIME	(1 << 4)
+#define ATTR_MTIME	(1 << 5)
+#define ATTR_CTIME	(1 << 6)
+#define ATTR_ATIME_SET	(1 << 7)
+#define ATTR_MTIME_SET	(1 << 8)
+#define ATTR_FORCE	(1 << 9) /* Not a change, but a change it */
+#define ATTR_ATTR_FLAG	(1 << 10)
+#define ATTR_KILL_SUID	(1 << 11)
+#define ATTR_KILL_SGID	(1 << 12)
+#define ATTR_FILE	(1 << 13)
+#define ATTR_KILL_PRIV	(1 << 14)
+#define ATTR_OPEN	(1 << 15) /* Truncating from open(O_TRUNC) */
+#define ATTR_TIMES_SET	(1 << 16)
 
 /*
  * This is the Inode Attributes structure, used for notify_change().  It
@@ -440,6 +443,27 @@ static inline size_t iov_iter_count(struct iov_iter *i)
 	return i->count;
 }
 
+/*
+ * "descriptor" for what we're up to with a read.
+ * This allows us to use the same read code yet
+ * have multiple different users of the data that
+ * we read from a file.
+ *
+ * The simplest case just copies the data to user
+ * mode.
+ */
+typedef struct {
+	size_t written;
+	size_t count;
+	union {
+		char __user *buf;
+		void *data;
+	} arg;
+	int error;
+} read_descriptor_t;
+
+typedef int (*read_actor_t)(read_descriptor_t *, struct page *,
+		unsigned long, unsigned long);
 
 struct address_space_operations {
 	int (*writepage)(struct page *page, struct writeback_control *wbc);
@@ -481,6 +505,8 @@ struct address_space_operations {
 	int (*migratepage) (struct address_space *,
 			struct page *, struct page *);
 	int (*launder_page) (struct page *);
+	int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+					unsigned long);
 };
 
 /*
@@ -499,7 +525,7 @@ struct backing_dev_info;
 struct address_space {
 	struct inode		*host;		/* owner: inode, block_device */
 	struct radix_tree_root	page_tree;	/* radix tree of all pages */
-	rwlock_t		tree_lock;	/* and rwlock protecting it */
+	spinlock_t		tree_lock;	/* and lock protecting it */
 	unsigned int		i_mmap_writable;/* count VM_SHARED mappings */
 	struct prio_tree_root	i_mmap;		/* tree of private and shared mappings */
 	struct list_head	i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
@@ -792,7 +818,7 @@ struct file {
 #define f_dentry	f_path.dentry
 #define f_vfsmnt	f_path.mnt
 	const struct file_operations	*f_op;
-	atomic_t		f_count;
+	atomic_long_t		f_count;
 	unsigned int 		f_flags;
 	mode_t			f_mode;
 	loff_t			f_pos;
@@ -821,8 +847,8 @@ extern spinlock_t files_lock;
 #define file_list_lock() spin_lock(&files_lock);
 #define file_list_unlock() spin_unlock(&files_lock);
 
-#define get_file(x)	atomic_inc(&(x)->f_count)
-#define file_count(x)	atomic_read(&(x)->f_count)
+#define get_file(x)	atomic_long_inc(&(x)->f_count)
+#define file_count(x)	atomic_long_read(&(x)->f_count)
 
 #ifdef CONFIG_DEBUG_WRITECOUNT
 static inline void file_take_write(struct file *f)
@@ -886,6 +912,12 @@ static inline int file_check_writeable(struct file *filp)
 #define FL_SLEEP	128	/* A blocking lock */
 
 /*
+ * Special return value from posix_lock_file() and vfs_lock_file() for
+ * asynchronous locking.
+ */
+#define FILE_LOCK_DEFERRED 1
+
+/*
  * The POSIX file lock owner is determined by
  * the "struct files_struct" in the thread group
  * (or NULL for no owner - BSD locks).
@@ -918,12 +950,12 @@ struct file_lock {
 	struct list_head fl_link;	/* doubly linked list of all locks */
 	struct list_head fl_block;	/* circular list of blocked processes */
 	fl_owner_t fl_owner;
+	unsigned char fl_flags;
+	unsigned char fl_type;
 	unsigned int fl_pid;
 	struct pid *fl_nspid;
 	wait_queue_head_t fl_wait;
 	struct file *fl_file;
-	unsigned char fl_flags;
-	unsigned char fl_type;
 	loff_t fl_start;
 	loff_t fl_end;
 
@@ -1025,6 +1057,7 @@ extern int send_sigurg(struct fown_struct *fown);
 extern struct list_head super_blocks;
 extern spinlock_t sb_lock;
 
+#define sb_entry(list)  list_entry((list), struct super_block, s_list)
 #define S_BIAS (1<<30)
 struct super_block {
 	struct list_head	s_list;		/* Keep this first */
@@ -1058,6 +1091,9 @@ struct super_block {
 	struct list_head	s_more_io;	/* parked for more writeback */
 	struct hlist_head	s_anon;		/* anonymous dentries for (nfs) exporting */
 	struct list_head	s_files;
+	/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
+	struct list_head	s_dentry_lru;	/* unused dentry lru */
+	int			s_nr_dentry_unused;	/* # of dentry on lru */
 
 	struct block_device	*s_bdev;
 	struct mtd_info		*s_mtd;
@@ -1126,7 +1162,7 @@ extern int vfs_permission(struct nameidata *, int);
 extern int vfs_create(struct inode *, struct dentry *, int, struct nameidata *);
 extern int vfs_mkdir(struct inode *, struct dentry *, int);
 extern int vfs_mknod(struct inode *, struct dentry *, int, dev_t);
-extern int vfs_symlink(struct inode *, struct dentry *, const char *, int);
+extern int vfs_symlink(struct inode *, struct dentry *, const char *);
 extern int vfs_link(struct dentry *, struct inode *, struct dentry *);
 extern int vfs_rmdir(struct inode *, struct dentry *);
 extern int vfs_unlink(struct inode *, struct dentry *);
@@ -1185,27 +1221,6 @@ struct block_device_operations {
 	struct module *owner;
 };
 
-/*
- * "descriptor" for what we're up to with a read.
- * This allows us to use the same read code yet
- * have multiple different users of the data that
- * we read from a file.
- *
- * The simplest case just copies the data to user
- * mode.
- */
-typedef struct {
-	size_t written;
-	size_t count;
-	union {
-		char __user * buf;
-		void *data;
-	} arg;
-	int error;
-} read_descriptor_t;
-
-typedef int (*read_actor_t)(read_descriptor_t *, struct page *, unsigned long, unsigned long);
-
 /* These macros are for out of kernel modules to test that
  * the kernel supports the unlocked_ioctl and compat_ioctl
  * fields in struct file_operations. */
@@ -1262,7 +1277,7 @@ struct inode_operations {
 	void * (*follow_link) (struct dentry *, struct nameidata *);
 	void (*put_link) (struct dentry *, struct nameidata *, void *);
 	void (*truncate) (struct inode *);
-	int (*permission) (struct inode *, int, struct nameidata *);
+	int (*permission) (struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
 	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
 	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
@@ -1686,9 +1701,9 @@ extern void init_special_inode(struct inode *, umode_t, dev_t);
 extern void make_bad_inode(struct inode *);
 extern int is_bad_inode(struct inode *);
 
-extern const struct file_operations read_fifo_fops;
-extern const struct file_operations write_fifo_fops;
-extern const struct file_operations rdwr_fifo_fops;
+extern const struct file_operations read_pipefifo_fops;
+extern const struct file_operations write_pipefifo_fops;
+extern const struct file_operations rdwr_pipefifo_fops;
 
 extern int fs_may_remount_ro(struct super_block *);
 
@@ -1757,7 +1772,7 @@ extern int do_remount_sb(struct super_block *sb, int flags,
 extern sector_t bmap(struct inode *, sector_t);
 #endif
 extern int notify_change(struct dentry *, struct iattr *);
-extern int permission(struct inode *, int, struct nameidata *);
+extern int inode_permission(struct inode *, int);
 extern int generic_permission(struct inode *, int,
 		int (*check_acl)(struct inode *, int));
 
@@ -1773,8 +1788,9 @@ static inline void allow_write_access(struct file *file)
 		atomic_inc(&file->f_path.dentry->d_inode->i_writecount);
 }
 extern int do_pipe(int *);
-extern struct file *create_read_pipe(struct file *f);
-extern struct file *create_write_pipe(void);
+extern int do_pipe_flags(int *, int);
+extern struct file *create_read_pipe(struct file *f, int flags);
+extern struct file *create_write_pipe(int flags);
 extern void free_write_pipe(struct file *);
 
 extern struct file *do_filp_open(int dfd, const char *pathname,
@@ -1820,7 +1836,7 @@ extern void clear_inode(struct inode *);
 extern void destroy_inode(struct inode *);
 extern struct inode *new_inode(struct super_block *);
 extern int should_remove_suid(struct dentry *);
-extern int remove_suid(struct dentry *);
+extern int file_remove_suid(struct file *);
 
 extern void __insert_inode_hash(struct inode *, unsigned long hashval);
 extern void remove_inode_hash(struct inode *);
@@ -2006,8 +2022,6 @@ extern void simple_release_fs(struct vfsmount **mount, int *count);
 
 extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
 			loff_t *ppos, const void *from, size_t available);
-extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
-			const void *from, size_t available);
 
 #ifdef CONFIG_MIGRATION
 extern int buffer_migrate_page(struct address_space *,
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 9bc045b8c478..8300cab30f9a 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -103,10 +103,6 @@ struct fs_mii_bb_platform_info {
 	struct fs_mii_bit 	mdio_dir;
 	struct fs_mii_bit 	mdio_dat;
 	struct fs_mii_bit	mdc_dat;
-	int mdio_port;	/* port & bit for MDIO */
-	int mdio_bit;
-	int mdc_port;	/* port & bit for MDC  */
-	int mdc_bit;
 	int delay;	/* delay in us         */
 	int irq[32]; 	/* irqs per phy's */
 };
@@ -135,11 +131,7 @@ struct fs_platform_info {
 	u32 device_flags;
 
 	int phy_addr;		/* the phy address (-1 no phy) */
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	char bus_id[16];
-#else
-	const char*	bus_id;
-#endif
 	int phy_irq;		/* the phy irq (if it exists)  */
 
 	const struct fs_mii_bus_info *bus_info;
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
index 282f54219129..9e5a06e78d02 100644
--- a/include/linux/fs_struct.h
+++ b/include/linux/fs_struct.h
@@ -7,7 +7,7 @@ struct fs_struct {
 	atomic_t count;
 	rwlock_t lock;
 	int umask;
-	struct path root, pwd, altroot;
+	struct path root, pwd;
 };
 
 #define INIT_FS {				\
@@ -19,7 +19,6 @@ struct fs_struct {
 extern struct kmem_cache *fs_cachep;
 
 extern void exit_fs(struct task_struct *);
-extern void set_fs_altroot(void);
 extern void set_fs_root(struct fs_struct *, struct path *);
 extern void set_fs_pwd(struct fs_struct *, struct path *);
 extern struct fs_struct *copy_fs_struct(struct fs_struct *);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index c415a496de3a..4e625e0094c8 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -69,6 +69,7 @@ struct gianfar_mdio_data {
 #define FSL_GIANFAR_DEV_HAS_VLAN		0x00000020
 #define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH	0x00000040
 #define FSL_GIANFAR_DEV_HAS_PADDING		0x00000080
+#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET	0x00000100
 
 /* Flags in gianfar_platform_data */
 #define FSL_GIANFAR_BRD_HAS_PHY_INTR	0x00000001 /* set or use a timer */
@@ -125,4 +126,10 @@ struct mpc8xx_pcmcia_ops {
 	int(*voltage_set)(int slot, int vcc, int vpp);
 };
 
+/* Returns non-zero if the current suspend operation would
+ * lead to a deep sleep (i.e. power removed from the core,
+ * instead of just the clock).
+ */
+int fsl_deep_sleep(void);
+
 #endif /* _FSL_DEVICE_H_ */
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index d48282197696..265635dc9908 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -104,11 +104,14 @@ struct fuse_file_lock {
 
 /**
  * INIT request/reply flags
+ *
+ * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
  */
 #define FUSE_ASYNC_READ		(1 << 0)
 #define FUSE_POSIX_LOCKS	(1 << 1)
 #define FUSE_FILE_OPS		(1 << 2)
 #define FUSE_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_EXPORT_SUPPORT	(1 << 4)
 #define FUSE_BIG_WRITES		(1 << 5)
 
 /**
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index afad95272841..f64e29c0ef3f 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -68,7 +68,6 @@ struct gameport_driver {
 
 int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mode);
 void gameport_close(struct gameport *gameport);
-void gameport_rescan(struct gameport *gameport);
 
 #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
 
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
index 110833666e37..4cc913939817 100644
--- a/include/linux/generic_serial.h
+++ b/include/linux/generic_serial.h
@@ -14,6 +14,7 @@
 
 #ifdef __KERNEL__
 #include <linux/mutex.h>
+#include <linux/tty.h>
 
 struct real_driver {
   void                    (*disable_tx_interrupts) (void *);
@@ -33,17 +34,12 @@ struct real_driver {
 
 struct gs_port {
   int                     magic;
+  struct tty_port	  port;
   unsigned char           *xmit_buf; 
   int                     xmit_head;
   int                     xmit_tail;
   int                     xmit_cnt;
   struct mutex            port_write_mutex;
-  int                     flags;
-  wait_queue_head_t       open_wait;
-  wait_queue_head_t       close_wait;
-  int                     count;
-  int                     blocked_open;
-  struct tty_struct       *tty;
   unsigned long           event;
   unsigned short          closing_wait;
   int                     close_delay;
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index e8787417f65a..118216f1bd3c 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -541,7 +541,7 @@ extern dev_t blk_lookup_devt(const char *name, int part);
 extern char *disk_name (struct gendisk *hd, int part, char *buf);
 
 extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
-extern void add_partition(struct gendisk *, int, sector_t, sector_t, int);
+extern int __must_check add_partition(struct gendisk *, int, sector_t, sector_t, int);
 extern void delete_partition(struct gendisk *, int);
 extern void printk_all_partitions(void);
 
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index b414be387180..e8003afeffba 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -173,11 +173,24 @@ static inline void arch_free_page(struct page *page, int order) { }
 static inline void arch_alloc_page(struct page *page, int order) { }
 #endif
 
-extern struct page *__alloc_pages(gfp_t, unsigned int, struct zonelist *);
+struct page *
+__alloc_pages_internal(gfp_t gfp_mask, unsigned int order,
+		       struct zonelist *zonelist, nodemask_t *nodemask);
+
+static inline struct page *
+__alloc_pages(gfp_t gfp_mask, unsigned int order,
+		struct zonelist *zonelist)
+{
+	return __alloc_pages_internal(gfp_mask, order, zonelist, NULL);
+}
+
+static inline struct page *
+__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
+		struct zonelist *zonelist, nodemask_t *nodemask)
+{
+	return __alloc_pages_internal(gfp_mask, order, zonelist, nodemask);
+}
 
-extern struct page *
-__alloc_pages_nodemask(gfp_t, unsigned int,
-				struct zonelist *, nodemask_t *nodemask);
 
 static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
 						unsigned int order)
@@ -215,6 +228,9 @@ extern struct page *alloc_page_vma(gfp_t gfp_mask,
 extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
 extern unsigned long get_zeroed_page(gfp_t gfp_mask);
 
+void *alloc_pages_exact(size_t size, gfp_t gfp_mask);
+void free_pages_exact(void *virt, size_t size);
+
 #define __get_free_page(gfp_mask) \
 		__get_free_pages((gfp_mask),0)
 
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 98be6c5762b9..730a20b83576 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -79,6 +79,19 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	WARN_ON(1);
 }
 
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	/* GPIO can never have been requested or set as {in,out}put */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+	/* GPIO can never have been exported */
+	WARN_ON(1);
+}
+
 static inline int gpio_to_irq(unsigned gpio)
 {
 	/* GPIO can never have been requested or set as input */
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index c6d3a9de5634..ec6ecd74781d 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -9,6 +9,7 @@ struct gpio_keys_button {
 	char *desc;
 	int type;		/* input event type (EV_KEY, EV_SW) */
 	int wakeup;		/* configure the button as a wake-up source */
+	int debounce_interval;	/* debounce ticks interval in msecs */
 };
 
 struct gpio_keys_platform_data {
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
index 2177ee5b2fe2..940aeb51d53f 100644
--- a/include/linux/hayesesp.h
+++ b/include/linux/hayesesp.h
@@ -76,11 +76,10 @@ struct hayes_esp_config {
 
 struct esp_struct {
 	int			magic;
+	struct tty_port		port;
 	spinlock_t		lock;
-	int			port;
+	int			io_port;
 	int			irq;
-	int			flags; 		/* defined in tty.h */
-	struct tty_struct 	*tty;
 	int			read_status_mask;
 	int			ignore_status_mask;
 	int			timeout;
@@ -93,14 +92,10 @@ struct esp_struct {
 	int			MCR; 	/* Modem control register */
 	unsigned long		last_active;
 	int			line;
-	int			count;	    /* # of fd on device */
-	int			blocked_open; /* # of blocked opens */
 	unsigned char 		*xmit_buf;
 	int			xmit_head;
 	int			xmit_tail;
 	int			xmit_cnt;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
 	wait_queue_head_t	delta_msr_wait;
 	wait_queue_head_t	break_wait;
 	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index 6115545a5b9c..c59769693bee 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -45,7 +45,6 @@ struct hdlc_proto {
 
 /* Pointed to by dev->priv */
 typedef struct hdlc_device {
-	struct net_device_stats stats;
 	/* used by HDLC layer to take control over HDLC device from hw driver*/
 	int (*attach)(struct net_device *dev,
 		      unsigned short encoding, unsigned short parity);
@@ -109,12 +108,6 @@ int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto,
 /* May be used by hardware driver to gain control over HDLC device */
 void detach_hdlc_protocol(struct net_device *dev);
 
-static __inline__ struct net_device_stats *hdlc_stats(struct net_device *dev)
-{
-	return &dev_to_hdlc(dev)->stats;
-}
-
-
 static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb,
 					 struct net_device *dev)
 {
diff --git a/include/linux/hid.h b/include/linux/hid.h
index fe56b86f2c67..ac4e678a04ed 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -512,7 +512,7 @@ struct hid_descriptor {
 
 /* Applications from HID Usage Tables 4/8/99 Version 1.1 */
 /* We ignore a few input applications that are not widely used */
-#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001))
+#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
 
 /* HID core API */
 
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index a79e80b689d8..32e0ef0f6e1f 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -8,7 +8,6 @@
 #include <linux/mempolicy.h>
 #include <linux/shm.h>
 #include <asm/tlbflush.h>
-#include <asm/hugetlb.h>
 
 struct ctl_table;
 
@@ -17,38 +16,45 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
 	return vma->vm_flags & VM_HUGETLB;
 }
 
+void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
 int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
 int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
 int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int, int);
-void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
-void __unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long);
+void unmap_hugepage_range(struct vm_area_struct *,
+			unsigned long, unsigned long, struct page *);
+void __unmap_hugepage_range(struct vm_area_struct *,
+			unsigned long, unsigned long, struct page *);
 int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
 int hugetlb_report_meminfo(char *);
 int hugetlb_report_node_meminfo(int, char *);
 unsigned long hugetlb_total_pages(void);
 int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 			unsigned long address, int write_access);
-int hugetlb_reserve_pages(struct inode *inode, long from, long to);
+int hugetlb_reserve_pages(struct inode *inode, long from, long to,
+						struct vm_area_struct *vma);
 void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
 
-extern unsigned long max_huge_pages;
-extern unsigned long sysctl_overcommit_huge_pages;
 extern unsigned long hugepages_treat_as_movable;
 extern const unsigned long hugetlb_zero, hugetlb_infinity;
 extern int sysctl_hugetlb_shm_group;
+extern struct list_head huge_boot_pages;
 
 /* arch callbacks */
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr);
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz);
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr);
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep);
 struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
 			      int write);
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 				pmd_t *pmd, int write);
+struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address,
+				pud_t *pud, int write);
 int pmd_huge(pmd_t pmd);
+int pud_huge(pud_t pmd);
 void hugetlb_change_protection(struct vm_area_struct *vma,
 		unsigned long address, unsigned long end, pgprot_t newprot);
 
@@ -58,6 +64,11 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
 {
 	return 0;
 }
+
+static inline void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
+{
+}
+
 static inline unsigned long hugetlb_total_pages(void)
 {
 	return 0;
@@ -67,12 +78,14 @@ static inline unsigned long hugetlb_total_pages(void)
 #define follow_huge_addr(mm, addr, write)	ERR_PTR(-EINVAL)
 #define copy_hugetlb_page_range(src, dst, vma)	({ BUG(); 0; })
 #define hugetlb_prefault(mapping, vma)		({ BUG(); 0; })
-#define unmap_hugepage_range(vma, start, end)	BUG()
+#define unmap_hugepage_range(vma, start, end, page)	BUG()
 #define hugetlb_report_meminfo(buf)		0
 #define hugetlb_report_node_meminfo(n, buf)	0
 #define follow_huge_pmd(mm, addr, pmd, write)	NULL
-#define prepare_hugepage_range(addr,len)	(-EINVAL)
+#define follow_huge_pud(mm, addr, pud, write)	NULL
+#define prepare_hugepage_range(file, addr, len)	(-EINVAL)
 #define pmd_huge(x)	0
+#define pud_huge(x)	0
 #define is_hugepage_only_range(mm, addr, len)	0
 #define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
 #define hugetlb_fault(mm, vma, addr, write)	({ BUG(); 0; })
@@ -93,6 +106,7 @@ struct hugetlbfs_config {
 	umode_t mode;
 	long	nr_blocks;
 	long	nr_inodes;
+	struct hstate *hstate;
 };
 
 struct hugetlbfs_sb_info {
@@ -101,6 +115,7 @@ struct hugetlbfs_sb_info {
 	long	max_inodes;   /* inodes allowed */
 	long	free_inodes;  /* inodes free */
 	spinlock_t	stat_lock;
+	struct hstate *hstate;
 };
 
 
@@ -125,8 +140,6 @@ struct file *hugetlb_file_setup(const char *name, size_t);
 int hugetlb_get_quota(struct address_space *mapping, long delta);
 void hugetlb_put_quota(struct address_space *mapping, long delta);
 
-#define BLOCKS_PER_HUGEPAGE	(HPAGE_SIZE / 512)
-
 static inline int is_file_hugepages(struct file *file)
 {
 	if (file->f_op == &hugetlbfs_file_operations)
@@ -155,4 +168,115 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long flags);
 #endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */
 
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HSTATE_NAME_LEN 32
+/* Defines one hugetlb page size */
+struct hstate {
+	int hugetlb_next_nid;
+	unsigned int order;
+	unsigned long mask;
+	unsigned long max_huge_pages;
+	unsigned long nr_huge_pages;
+	unsigned long free_huge_pages;
+	unsigned long resv_huge_pages;
+	unsigned long surplus_huge_pages;
+	unsigned long nr_overcommit_huge_pages;
+	struct list_head hugepage_freelists[MAX_NUMNODES];
+	unsigned int nr_huge_pages_node[MAX_NUMNODES];
+	unsigned int free_huge_pages_node[MAX_NUMNODES];
+	unsigned int surplus_huge_pages_node[MAX_NUMNODES];
+	char name[HSTATE_NAME_LEN];
+};
+
+struct huge_bootmem_page {
+	struct list_head list;
+	struct hstate *hstate;
+};
+
+/* arch callback */
+int __init alloc_bootmem_huge_page(struct hstate *h);
+
+void __init hugetlb_add_hstate(unsigned order);
+struct hstate *size_to_hstate(unsigned long size);
+
+#ifndef HUGE_MAX_HSTATE
+#define HUGE_MAX_HSTATE 1
+#endif
+
+extern struct hstate hstates[HUGE_MAX_HSTATE];
+extern unsigned int default_hstate_idx;
+
+#define default_hstate (hstates[default_hstate_idx])
+
+static inline struct hstate *hstate_inode(struct inode *i)
+{
+	struct hugetlbfs_sb_info *hsb;
+	hsb = HUGETLBFS_SB(i->i_sb);
+	return hsb->hstate;
+}
+
+static inline struct hstate *hstate_file(struct file *f)
+{
+	return hstate_inode(f->f_dentry->d_inode);
+}
+
+static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
+{
+	return hstate_file(vma->vm_file);
+}
+
+static inline unsigned long huge_page_size(struct hstate *h)
+{
+	return (unsigned long)PAGE_SIZE << h->order;
+}
+
+static inline unsigned long huge_page_mask(struct hstate *h)
+{
+	return h->mask;
+}
+
+static inline unsigned int huge_page_order(struct hstate *h)
+{
+	return h->order;
+}
+
+static inline unsigned huge_page_shift(struct hstate *h)
+{
+	return h->order + PAGE_SHIFT;
+}
+
+static inline unsigned int pages_per_huge_page(struct hstate *h)
+{
+	return 1 << h->order;
+}
+
+static inline unsigned int blocks_per_huge_page(struct hstate *h)
+{
+	return huge_page_size(h) / 512;
+}
+
+#include <asm/hugetlb.h>
+
+static inline struct hstate *page_hstate(struct page *page)
+{
+	return size_to_hstate(PAGE_SIZE << compound_order(page));
+}
+
+#else
+struct hstate {};
+#define alloc_bootmem_huge_page(h) NULL
+#define hstate_file(f) NULL
+#define hstate_vma(v) NULL
+#define hstate_inode(i) NULL
+#define huge_page_size(h) PAGE_SIZE
+#define huge_page_mask(h) PAGE_MASK
+#define huge_page_order(h) 0
+#define huge_page_shift(h) PAGE_SHIFT
+static inline unsigned int pages_per_huge_page(struct hstate *h)
+{
+	return 1;
+}
+#endif
+
 #endif /* _LINUX_HUGETLB_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index ef13b7c66df3..4862398e05bf 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -33,15 +33,11 @@
 
 #define I2C_DRIVERID_MSP3400	 1
 #define I2C_DRIVERID_TUNER	 2
-#define I2C_DRIVERID_TDA8425	 4	/* stereo sound processor	*/
 #define I2C_DRIVERID_TEA6420	 5	/* audio matrix switch		*/
 #define I2C_DRIVERID_TEA6415C	 6	/* video matrix switch		*/
 #define I2C_DRIVERID_TDA9840	 7	/* stereo sound processor	*/
 #define I2C_DRIVERID_SAA7111A	 8	/* video input processor	*/
 #define I2C_DRIVERID_SAA7185B	13	/* video encoder		*/
-#define I2C_DRIVERID_TEA6300	18	/* audio mixer			*/
-#define I2C_DRIVERID_TDA9850	20	/* audio mixer			*/
-#define I2C_DRIVERID_TDA9855	21	/* audio mixer			*/
 #define I2C_DRIVERID_SAA7110	22	/* video decoder		*/
 #define I2C_DRIVERID_MGATVO	23	/* Matrox TVOut			*/
 #define I2C_DRIVERID_SAA5249	24	/* SAA5249 and compatibles	*/
@@ -50,9 +46,7 @@
 #define I2C_DRIVERID_TDA7432	27	/* Stereo sound processor	*/
 #define I2C_DRIVERID_TVMIXER    28      /* Mixer driver for tv cards    */
 #define I2C_DRIVERID_TVAUDIO    29      /* Generic TV sound driver      */
-#define I2C_DRIVERID_TDA9873    31      /* TV sound decoder chip        */
 #define I2C_DRIVERID_TDA9875    32      /* TV sound decoder chip        */
-#define I2C_DRIVERID_PIC16C54_PV9 33    /* Audio mux/ir receiver        */
 #define I2C_DRIVERID_BT819	40     /* video decoder			*/
 #define I2C_DRIVERID_BT856	41     /* video encoder			*/
 #define I2C_DRIVERID_VPX3220	42     /* video decoder+vbi/vtxt	*/
@@ -63,7 +57,6 @@
 #define I2C_DRIVERID_INDYCAM	58	/* SGI IndyCam			*/
 #define I2C_DRIVERID_OVCAMCHIP	61	/* OmniVision CMOS image sens.	*/
 #define I2C_DRIVERID_MAX6900	63	/* MAX6900 real-time clock	*/
-#define I2C_DRIVERID_TDA9874	66	/* TV sound decoder		*/
 #define I2C_DRIVERID_SAA6752HS	67	/* MPEG2 encoder		*/
 #define I2C_DRIVERID_TVEEPROM	68	/* TV EEPROM			*/
 #define I2C_DRIVERID_WM8775	69	/* wm8775 audio processor	*/
@@ -158,7 +151,6 @@
 #define I2C_HW_SMBUS_W9968CF	0x04000d
 #define I2C_HW_SMBUS_OV511	0x04000e /* OV511(+) USB 1.1 webcam ICs */
 #define I2C_HW_SMBUS_OV518	0x04000f /* OV518(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OVFX2	0x040011 /* Cypress/OmniVision FX2 webcam */
 #define I2C_HW_SMBUS_CAFE	0x040012 /* Marvell 88ALP01 "CAFE" cam  */
 #define I2C_HW_SMBUS_ALI1563	0x040013
 
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index e6e9c814da61..f13255e06406 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -12,7 +12,9 @@
 #ifndef __I2C_PNX_H__
 #define __I2C_PNX_H__
 
-#include <asm/arch/i2c.h>
+#include <linux/pm.h>
+
+struct platform_device;
 
 struct i2c_pnx_mif {
 	int			ret;		/* Return value */
diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h
new file mode 100644
index 000000000000..e10336631c62
--- /dev/null
+++ b/include/linux/i2c/max732x.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_I2C_MAX732X_H
+#define __LINUX_I2C_MAX732X_H
+
+/* platform data for the MAX732x 8/16-bit I/O expander driver */
+
+struct max732x_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	void		*context;	/* param to setup/teardown */
+
+	int		(*setup)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	int		(*teardown)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+};
+#endif /* __LINUX_I2C_MAX732X_H */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 7d51cbca49ab..75ae6d8aba4f 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -758,7 +758,7 @@ static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
 	}
 
 	dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction);
-	if (!dma_mapping_error(dma_addr)) {
+	if (!dma_mapping_error(&c->pdev->dev, dma_addr)) {
 #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
 		if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
 			*mptr++ = cpu_to_le32(0x7C020002);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 4726126f5a59..87c12ed96954 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -178,6 +178,7 @@ typedef struct hw_regs_s {
 	ide_ack_intr_t	*ack_intr;		/* acknowledge interrupt */
 	hwif_chipset_t  chipset;
 	struct device	*dev, *parent;
+	unsigned long	config;
 } hw_regs_t;
 
 void ide_init_port_data(struct hwif_s *, unsigned int);
@@ -210,13 +211,16 @@ static inline int __ide_default_irq(unsigned long base)
 	return 0;
 }
 
+#if defined(CONFIG_ARM) || defined(CONFIG_FRV) || defined(CONFIG_M68K) || \
+    defined(CONFIG_MIPS) || defined(CONFIG_MN10300) || defined(CONFIG_PARISC) \
+    || defined(CONFIG_PPC) || defined(CONFIG_SPARC) || defined(CONFIG_SPARC64)
 #include <asm/ide.h>
-
-#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
-#undef MAX_HWIFS
-#define MAX_HWIFS	CONFIG_IDE_MAX_HWIFS
+#else
+#include <asm-generic/ide_iops.h>
 #endif
 
+#define MAX_HWIFS	10
+
 /* Currently only m68k, apus and m8xx need it */
 #ifndef IDE_ARCH_ACK_INTR
 # define ide_ack_intr(hwif) (1)
@@ -307,7 +311,65 @@ struct ide_acpi_drive_link;
 struct ide_acpi_hwif_link;
 #endif
 
-typedef struct ide_drive_s {
+/* ATAPI device flags */
+enum {
+	IDE_AFLAG_DRQ_INTERRUPT		= (1 << 0),
+	IDE_AFLAG_MEDIA_CHANGED		= (1 << 1),
+
+	/* ide-cd */
+	/* Drive cannot lock the door. */
+	IDE_AFLAG_NO_DOORLOCK		= (1 << 2),
+	/* Drive cannot eject the disc. */
+	IDE_AFLAG_NO_EJECT		= (1 << 3),
+	/* Drive is a pre ATAPI 1.2 drive. */
+	IDE_AFLAG_PRE_ATAPI12		= (1 << 4),
+	/* TOC addresses are in BCD. */
+	IDE_AFLAG_TOCADDR_AS_BCD	= (1 << 5),
+	/* TOC track numbers are in BCD. */
+	IDE_AFLAG_TOCTRACKS_AS_BCD	= (1 << 6),
+	/*
+	 * Drive does not provide data in multiples of SECTOR_SIZE
+	 * when more than one interrupt is needed.
+	 */
+	IDE_AFLAG_LIMIT_NFRAMES		= (1 << 7),
+	/* Seeking in progress. */
+	IDE_AFLAG_SEEKING		= (1 << 8),
+	/* Saved TOC information is current. */
+	IDE_AFLAG_TOC_VALID		= (1 << 9),
+	/* We think that the drive door is locked. */
+	IDE_AFLAG_DOOR_LOCKED		= (1 << 10),
+	/* SET_CD_SPEED command is unsupported. */
+	IDE_AFLAG_NO_SPEED_SELECT	= (1 << 11),
+	IDE_AFLAG_VERTOS_300_SSD	= (1 << 12),
+	IDE_AFLAG_VERTOS_600_ESD	= (1 << 13),
+	IDE_AFLAG_SANYO_3CD		= (1 << 14),
+	IDE_AFLAG_FULL_CAPS_PAGE	= (1 << 15),
+	IDE_AFLAG_PLAY_AUDIO_OK		= (1 << 16),
+	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 17),
+
+	/* ide-floppy */
+	/* Format in progress */
+	IDE_AFLAG_FORMAT_IN_PROGRESS	= (1 << 18),
+	/* Avoid commands not supported in Clik drive */
+	IDE_AFLAG_CLIK_DRIVE		= (1 << 19),
+	/* Requires BH algorithm for packets */
+	IDE_AFLAG_ZIP_DRIVE		= (1 << 20),
+
+	/* ide-tape */
+	IDE_AFLAG_IGNORE_DSC		= (1 << 21),
+	/* 0 When the tape position is unknown */
+	IDE_AFLAG_ADDRESS_VALID		= (1 <<	22),
+	/* Device already opened */
+	IDE_AFLAG_BUSY			= (1 << 23),
+	/* Attempt to auto-detect the current user block size */
+	IDE_AFLAG_DETECT_BS		= (1 << 24),
+	/* Currently on a filemark */
+	IDE_AFLAG_FILEMARK		= (1 << 25),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 26)
+};
+
+struct ide_drive_s {
 	char		name[4];	/* drive name, such as "hda" */
         char            driver_req[10];	/* requests specific driver */
 
@@ -355,7 +417,6 @@ typedef struct ide_drive_s {
 	unsigned nodma		: 1;	/* disallow DMA */
 	unsigned remap_0_to_1	: 1;	/* 0=noremap, 1=remap 0->1 (for EZDrive) */
 	unsigned blocked        : 1;	/* 1=powermanagment told us not to do anything, so sleep nicely */
-	unsigned vdma		: 1;	/* 1=doing PIO over DMA 0=doing normal DMA */
 	unsigned scsi		: 1;	/* 0=default, 1=ide-scsi emulation */
 	unsigned sleeping	: 1;	/* 1=sleeping & sleep field valid */
 	unsigned post_reset	: 1;
@@ -400,7 +461,14 @@ typedef struct ide_drive_s {
 	struct list_head list;
 	struct device	gendev;
 	struct completion gendev_rel_comp;	/* to deal with device release() */
-} ide_drive_t;
+
+	/* callback for packet commands */
+	void (*pc_callback)(struct ide_drive_s *);
+
+	unsigned long atapi_flags;
+};
+
+typedef struct ide_drive_s ide_drive_t;
 
 #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
 
@@ -408,26 +476,55 @@ typedef struct ide_drive_s {
     ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
 #define IDE_CHIPSET_IS_PCI(c)	((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
 
+struct ide_task_s;
 struct ide_port_info;
 
+struct ide_tp_ops {
+	void	(*exec_command)(struct hwif_s *, u8);
+	u8	(*read_status)(struct hwif_s *);
+	u8	(*read_altstatus)(struct hwif_s *);
+	u8	(*read_sff_dma_status)(struct hwif_s *);
+
+	void	(*set_irq)(struct hwif_s *, int);
+
+	void	(*tf_load)(ide_drive_t *, struct ide_task_s *);
+	void	(*tf_read)(ide_drive_t *, struct ide_task_s *);
+
+	void	(*input_data)(ide_drive_t *, struct request *, void *,
+			      unsigned int);
+	void	(*output_data)(ide_drive_t *, struct request *, void *,
+			       unsigned int);
+};
+
+extern const struct ide_tp_ops default_tp_ops;
+
+/**
+ * struct ide_port_ops - IDE port operations
+ *
+ * @init_dev:		host specific initialization of a device
+ * @set_pio_mode:	routine to program host for PIO mode
+ * @set_dma_mode:	routine to program host for DMA mode
+ * @selectproc:		tweaks hardware to select drive
+ * @reset_poll:		chipset polling based on hba specifics
+ * @pre_reset:		chipset specific changes to default for device-hba resets
+ * @resetproc:		routine to reset controller after a disk reset
+ * @maskproc:		special host masking for drive selection
+ * @quirkproc:		check host's drive quirk list
+ *
+ * @mdma_filter:	filter MDMA modes
+ * @udma_filter:	filter UDMA modes
+ *
+ * @cable_detect:	detect cable type
+ */
 struct ide_port_ops {
-	/* host specific initialization of a device */
 	void	(*init_dev)(ide_drive_t *);
-	/* routine to program host for PIO mode */
 	void	(*set_pio_mode)(ide_drive_t *, const u8);
-	/* routine to program host for DMA mode */
 	void	(*set_dma_mode)(ide_drive_t *, const u8);
-	/* tweaks hardware to select drive */
 	void	(*selectproc)(ide_drive_t *);
-	/* chipset polling based on hba specifics */
 	int	(*reset_poll)(ide_drive_t *);
-	/* chipset specific changes to default for device-hba resets */
 	void	(*pre_reset)(ide_drive_t *);
-	/* routine to reset controller after a disk reset */
 	void	(*resetproc)(ide_drive_t *);
-	/* special host masking for drive selection */
 	void	(*maskproc)(ide_drive_t *, int);
-	/* check host's drive quirk list */
 	void	(*quirkproc)(ide_drive_t *);
 
 	u8	(*mdma_filter)(ide_drive_t *);
@@ -447,7 +544,7 @@ struct ide_dma_ops {
 	void	(*dma_timeout)(struct ide_drive_s *);
 };
 
-struct ide_task_s;
+struct ide_host;
 
 typedef struct hwif_s {
 	struct hwif_s *next;		/* for linked-list in ide_hwgroup_t */
@@ -455,6 +552,8 @@ typedef struct hwif_s {
 	struct hwgroup_s *hwgroup;	/* actually (ide_hwgroup_t *) */
 	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
 
+	struct ide_host *host;
+
 	char name[6];			/* name of interface, eg. "ide0" */
 
 	struct ide_io_ports	io_ports;
@@ -486,22 +585,12 @@ typedef struct hwif_s {
 
 	void (*rw_disk)(ide_drive_t *, struct request *);
 
+	const struct ide_tp_ops		*tp_ops;
 	const struct ide_port_ops	*port_ops;
 	const struct ide_dma_ops	*dma_ops;
 
-	void (*tf_load)(ide_drive_t *, struct ide_task_s *);
-	void (*tf_read)(ide_drive_t *, struct ide_task_s *);
-
-	void (*input_data)(ide_drive_t *, struct request *, void *, unsigned);
-	void (*output_data)(ide_drive_t *, struct request *, void *, unsigned);
-
 	void (*ide_dma_clear_irq)(ide_drive_t *drive);
 
-	void (*OUTB)(u8 addr, unsigned long port);
-	void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port);
-
-	u8  (*INB)(unsigned long port);
-
 	/* dma physical region descriptor table (cpu view) */
 	unsigned int	*dmatable_cpu;
 	/* dma physical region descriptor table (dma view) */
@@ -524,8 +613,6 @@ typedef struct hwif_s {
 	int		irq;		/* our irq number */
 
 	unsigned long	dma_base;	/* base addr for dma ports */
-	unsigned long	dma_command;	/* dma command register */
-	unsigned long	dma_status;	/* dma status register */
 
 	unsigned long	config_data;	/* for use by chipset-specific code */
 	unsigned long	select_data;	/* for use by chipset-specific code */
@@ -552,6 +639,14 @@ typedef struct hwif_s {
 #endif
 } ____cacheline_internodealigned_in_smp ide_hwif_t;
 
+struct ide_host {
+	ide_hwif_t	*ports[MAX_HWIFS];
+	unsigned int	n_ports;
+	struct device	*dev[2];
+	unsigned long	host_flags;
+	void		*host_priv;
+};
+
 /*
  *  internal ide interrupt handler type
  */
@@ -611,8 +706,6 @@ enum {
 	PC_FLAG_WRITING			= (1 << 6),
 	/* command timed out */
 	PC_FLAG_TIMEDOUT		= (1 << 7),
-	PC_FLAG_ZIP_DRIVE		= (1 << 8),
-	PC_FLAG_DRQ_INTERRUPT		= (1 << 9),
 };
 
 struct ide_atapi_pc {
@@ -646,8 +739,6 @@ struct ide_atapi_pc {
 	 */
 	u8 pc_buf[256];
 
-	void (*callback)(ide_drive_t *);
-
 	/* idetape only */
 	struct idetape_bh *bh;
 	char *b_data;
@@ -802,18 +893,14 @@ struct ide_driver_s {
 
 #define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
 
+int ide_device_get(ide_drive_t *);
+void ide_device_put(ide_drive_t *);
+
 int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
 
 extern int ide_vlb_clk;
 extern int ide_pci_clk;
 
-ide_hwif_t *ide_find_port_slot(const struct ide_port_info *);
-
-static inline ide_hwif_t *ide_find_port(void)
-{
-	return ide_find_port_slot(NULL);
-}
-
 extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
 			     int uptodate, int nr_sectors);
@@ -884,6 +971,7 @@ enum {
 	IDE_TFLAG_IN_HOB		= IDE_TFLAG_IN_HOB_FEATURE |
 					  IDE_TFLAG_IN_HOB_NSECT |
 					  IDE_TFLAG_IN_HOB_LBA,
+	IDE_TFLAG_IN_FEATURE		= (1 << 1),
 	IDE_TFLAG_IN_NSECT		= (1 << 25),
 	IDE_TFLAG_IN_LBAL		= (1 << 26),
 	IDE_TFLAG_IN_LBAM		= (1 << 27),
@@ -948,9 +1036,25 @@ typedef struct ide_task_s {
 
 void ide_tf_dump(const char *, struct ide_taskfile *);
 
+void ide_exec_command(ide_hwif_t *, u8);
+u8 ide_read_status(ide_hwif_t *);
+u8 ide_read_altstatus(ide_hwif_t *);
+u8 ide_read_sff_dma_status(ide_hwif_t *);
+
+void ide_set_irq(ide_hwif_t *, int);
+
+void ide_tf_load(ide_drive_t *, ide_task_t *);
+void ide_tf_read(ide_drive_t *, ide_task_t *);
+
+void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
+void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);
+
 extern void SELECT_DRIVE(ide_drive_t *);
 void SELECT_MASK(ide_drive_t *, int);
 
+u8 ide_read_error(ide_drive_t *);
+void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
+
 extern int drive_is_ready(ide_drive_t *);
 
 void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8);
@@ -1000,12 +1104,15 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o
 #define ide_pci_register_driver(d) pci_register_driver(d)
 #endif
 
-void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *);
+void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
+			 hw_regs_t *, hw_regs_t **);
 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 int ide_pci_set_master(struct pci_dev *, const char *);
 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
+extern const struct ide_dma_ops sff_dma_ops;
+int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
 #else
 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
@@ -1015,10 +1122,6 @@ static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
 }
 #endif
 
-extern void default_hwif_iops(ide_hwif_t *);
-extern void default_hwif_mmiops(ide_hwif_t *);
-extern void default_hwif_transport(ide_hwif_t *);
-
 typedef struct ide_pci_enablebit_s {
 	u8	reg;	/* byte pci reg holding the enable-bit */
 	u8	mask;	/* mask to isolate the enable-bit */
@@ -1081,7 +1184,6 @@ enum {
 	IDE_HFLAG_IO_32BIT		= (1 << 24),
 	/* unmask IRQs */
 	IDE_HFLAG_UNMASK_IRQS		= (1 << 25),
-	IDE_HFLAG_ABUSE_SET_DMA_MODE	= (1 << 26),
 	/* serialize ports if DMA is possible (for sl82c105) */
 	IDE_HFLAG_SERIALIZE_DMA		= (1 << 27),
 	/* force host out of "simplex" mode */
@@ -1092,8 +1194,6 @@ enum {
 	IDE_HFLAG_NO_IO_32BIT		= (1 << 30),
 	/* never unmask IRQs */
 	IDE_HFLAG_NO_UNMASK_IRQS	= (1 << 31),
-	/* host uses VDMA (disabled for now) */
-	IDE_HFLAG_VDMA			= 0,
 };
 
 #ifdef CONFIG_BLK_DEV_OFFBOARD
@@ -1104,12 +1204,13 @@ enum {
 
 struct ide_port_info {
 	char			*name;
-	unsigned int		(*init_chipset)(struct pci_dev *, const char *);
+	unsigned int		(*init_chipset)(struct pci_dev *);
 	void			(*init_iops)(ide_hwif_t *);
 	void                    (*init_hwif)(ide_hwif_t *);
 	int			(*init_dma)(ide_hwif_t *,
 					    const struct ide_port_info *);
 
+	const struct ide_tp_ops		*tp_ops;
 	const struct ide_port_ops	*port_ops;
 	const struct ide_dma_ops	*dma_ops;
 
@@ -1122,8 +1223,10 @@ struct ide_port_info {
 	u8			udma_mask;
 };
 
-int ide_setup_pci_device(struct pci_dev *, const struct ide_port_info *);
-int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, const struct ide_port_info *);
+int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
+int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
+		     const struct ide_port_info *, void *);
+void ide_pci_remove(struct pci_dev *);
 
 void ide_map_sg(ide_drive_t *, struct request *);
 void ide_init_sg_cmd(ide_drive_t *, struct request *);
@@ -1163,7 +1266,6 @@ void ide_destroy_dmatable(ide_drive_t *);
 extern int ide_build_dmatable(ide_drive_t *, struct request *);
 int ide_allocate_dma_engine(ide_hwif_t *);
 void ide_release_dma_engine(ide_hwif_t *);
-void ide_setup_dma(ide_hwif_t *, unsigned long);
 
 void ide_dma_host_set(ide_drive_t *, int);
 extern int ide_dma_setup(ide_drive_t *);
@@ -1217,8 +1319,14 @@ void ide_undecoded_slave(ide_drive_t *);
 
 void ide_port_apply_params(ide_hwif_t *);
 
-int ide_device_add_all(u8 *idx, const struct ide_port_info *);
-int ide_device_add(u8 idx[4], const struct ide_port_info *);
+struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **);
+struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
+void ide_host_free(struct ide_host *);
+int ide_host_register(struct ide_host *, const struct ide_port_info *,
+		      hw_regs_t **);
+int ide_host_add(const struct ide_port_info *, hw_regs_t **,
+		 struct ide_host **);
+void ide_host_remove(struct ide_host *);
 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
 void ide_port_unregister_devices(ide_hwif_t *);
 void ide_port_scan(ide_hwif_t *);
@@ -1350,33 +1458,4 @@ static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
 
 	return &hwif->drives[(drive->dn ^ 1) & 1];
 }
-
-static inline void ide_set_irq(ide_drive_t *drive, int on)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2),
-		       hwif->io_ports.ctl_addr);
-}
-
-static inline u8 ide_read_status(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	return hwif->INB(hwif->io_ports.status_addr);
-}
-
-static inline u8 ide_read_altstatus(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	return hwif->INB(hwif->io_ports.ctl_addr);
-}
-
-static inline u8 ide_read_error(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-
-	return hwif->INB(hwif->io_ports.error_addr);
-}
 #endif /* _IDE_H */
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 9a2d762124de..fa035f96f2a3 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/bitops.h>
 #include <linux/init.h>
+#include <linux/rcupdate.h>
 
 #if BITS_PER_LONG == 32
 # define IDR_BITS 5
@@ -51,6 +52,7 @@ struct idr_layer {
 	unsigned long		 bitmap; /* A zero bit means "space here" */
 	struct idr_layer	*ary[1<<IDR_BITS];
 	int			 count;	 /* When zero, we can release it */
+	struct rcu_head		 rcu_head;
 };
 
 struct idr {
@@ -71,6 +73,28 @@ struct idr {
 }
 #define DEFINE_IDR(name)	struct idr name = IDR_INIT(name)
 
+/* Actions to be taken after a call to _idr_sub_alloc */
+#define IDR_NEED_TO_GROW -2
+#define IDR_NOMORE_SPACE -3
+
+#define _idr_rc_to_errno(rc) ((rc) == -1 ? -EAGAIN : -ENOSPC)
+
+/**
+ * idr synchronization (stolen from radix-tree.h)
+ *
+ * idr_find() is able to be called locklessly, using RCU. The caller must
+ * ensure calls to this function are made within rcu_read_lock() regions.
+ * Other readers (lock-free or otherwise) and modifications may be running
+ * concurrently.
+ *
+ * It is still required that the caller manage the synchronization and
+ * lifetimes of the items. So if RCU lock-free lookups are used, typically
+ * this would mean that the items have their own locks, or are amenable to
+ * lock-free access; and that the items are freed by RCU (or only freed after
+ * having been deleted from the idr tree *and* a synchronize_rcu() grace
+ * period).
+ */
+
 /*
  * This is what we export.
  */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 0b5e03eae6d2..7f4df7c7659d 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -98,6 +98,9 @@
 
 #define IEEE80211_MAX_SSID_LEN		32
 #define IEEE80211_MAX_MESH_ID_LEN	32
+#define IEEE80211_QOS_CTL_LEN		2
+#define IEEE80211_QOS_CTL_TID_MASK	0x000F
+#define IEEE80211_QOS_CTL_TAG1D_MASK	0x0007
 
 struct ieee80211_hdr {
 	__le16 frame_control;
@@ -109,6 +112,355 @@ struct ieee80211_hdr {
 	u8 addr4[6];
 } __attribute__ ((packed));
 
+/**
+ * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_tods(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0;
+}
+
+/**
+ * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_fromds(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0;
+}
+
+/**
+ * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_a4(__le16 fc)
+{
+	__le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
+	return (fc & tmp) == tmp;
+}
+
+/**
+ * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_morefrags(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0;
+}
+
+/**
+ * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_retry(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0;
+}
+
+/**
+ * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_pm(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0;
+}
+
+/**
+ * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_moredata(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0;
+}
+
+/**
+ * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_protected(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0;
+}
+
+/**
+ * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_order(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0;
+}
+
+/**
+ * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_mgmt(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT);
+}
+
+/**
+ * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_ctl(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL);
+}
+
+/**
+ * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA);
+}
+
+/**
+ * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data_qos(__le16 fc)
+{
+	/*
+	 * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need
+	 * to check the one bit
+	 */
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA);
+}
+
+/**
+ * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data_present(__le16 fc)
+{
+	/*
+	 * mask with 0x40 and test that that bit is clear to only return true
+	 * for the data-containing substypes.
+	 */
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA);
+}
+
+/**
+ * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_assoc_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ);
+}
+
+/**
+ * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_assoc_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP);
+}
+
+/**
+ * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_reassoc_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ);
+}
+
+/**
+ * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_reassoc_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP);
+}
+
+/**
+ * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_probe_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ);
+}
+
+/**
+ * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_probe_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP);
+}
+
+/**
+ * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_beacon(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
+}
+
+/**
+ * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_atim(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM);
+}
+
+/**
+ * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_disassoc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC);
+}
+
+/**
+ * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_auth(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
+}
+
+/**
+ * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_deauth(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH);
+}
+
+/**
+ * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_action(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION);
+}
+
+/**
+ * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_back_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ);
+}
+
+/**
+ * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_back(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK);
+}
+
+/**
+ * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_pspoll(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+}
+
+/**
+ * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_rts(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
+}
+
+/**
+ * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cts(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS);
+}
+
+/**
+ * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_ack(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK);
+}
+
+/**
+ * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cfend(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND);
+}
+
+/**
+ * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cfendack(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK);
+}
+
+/**
+ * ieee80211_is_nullfunc - check if FTYPE=IEEE80211_FTYPE_DATA and STYPE=IEEE80211_STYPE_NULLFUNC
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_nullfunc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
+}
 
 struct ieee80211s_hdr {
 	u8 flags;
@@ -119,6 +471,53 @@ struct ieee80211s_hdr {
 	u8 eaddr3[6];
 } __attribute__ ((packed));
 
+/**
+ * struct ieee80211_quiet_ie
+ *
+ * This structure refers to "Quiet information element"
+ */
+struct ieee80211_quiet_ie {
+	u8 count;
+	u8 period;
+	__le16 duration;
+	__le16 offset;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_msrment_ie
+ *
+ * This structure refers to "Measurement Request/Report information element"
+ */
+struct ieee80211_msrment_ie {
+	u8 token;
+	u8 mode;
+	u8 type;
+	u8 request[0];
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_channel_sw_ie
+ *
+ * This structure refers to "Channel Switch Announcement information element"
+ */
+struct ieee80211_channel_sw_ie {
+	u8 mode;
+	u8 new_ch_num;
+	u8 count;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_tim
+ *
+ * This structure refers to "Traffic Indication Map information element"
+ */
+struct ieee80211_tim_ie {
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	/* variable size: 1 - 251 bytes */
+	u8 virtual_map[0];
+} __attribute__ ((packed));
 
 struct ieee80211_mgmt {
 	__le16 frame_control;
@@ -194,13 +593,18 @@ struct ieee80211_mgmt {
 					u8 action_code;
 					u8 element_id;
 					u8 length;
-					u8 switch_mode;
-					u8 new_chan;
-					u8 switch_count;
+					struct ieee80211_channel_sw_ie sw_elem;
 				} __attribute__((packed)) chan_switch;
 				struct{
 					u8 action_code;
 					u8 dialog_token;
+					u8 element_id;
+					u8 length;
+					struct ieee80211_msrment_ie msr_elem;
+				} __attribute__((packed)) measurement;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
 					__le16 capab;
 					__le16 timeout;
 					__le16 start_seq_num;
@@ -269,6 +673,10 @@ struct ieee80211_bar {
 	__le16 start_seq_num;
 } __attribute__((packed));
 
+/* 802.11 BAR control masks */
+#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL     0x0000
+#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA  0x0004
+
 /**
  * struct ieee80211_ht_cap - HT capabilities
  *
@@ -306,20 +714,33 @@ struct ieee80211_ht_addt_info {
 #define IEEE80211_HT_CAP_SGI_40			0x0040
 #define IEEE80211_HT_CAP_DELAY_BA		0x0400
 #define IEEE80211_HT_CAP_MAX_AMSDU		0x0800
+/* 802.11n HT capability AMPDU settings */
 #define IEEE80211_HT_CAP_AMPDU_FACTOR		0x03
 #define IEEE80211_HT_CAP_AMPDU_DENSITY		0x1C
+/* 802.11n HT capability MSC set */
+#define IEEE80211_SUPP_MCS_SET_UEQM		4
+#define IEEE80211_HT_CAP_MAX_STREAMS		4
+#define IEEE80211_SUPP_MCS_SET_LEN		10
+/* maximum streams the spec allows */
+#define IEEE80211_HT_CAP_MCS_TX_DEFINED		0x01
+#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF		0x02
+#define IEEE80211_HT_CAP_MCS_TX_STREAMS		0x0C
+#define IEEE80211_HT_CAP_MCS_TX_UEQM		0x10
 /* 802.11n HT IE masks */
 #define IEEE80211_HT_IE_CHA_SEC_OFFSET		0x03
+#define IEEE80211_HT_IE_CHA_SEC_NONE	 	0x00
+#define IEEE80211_HT_IE_CHA_SEC_ABOVE 		0x01
+#define IEEE80211_HT_IE_CHA_SEC_BELOW 		0x03
 #define IEEE80211_HT_IE_CHA_WIDTH		0x04
 #define IEEE80211_HT_IE_HT_PROTECTION		0x0003
 #define IEEE80211_HT_IE_NON_GF_STA_PRSNT	0x0004
 #define IEEE80211_HT_IE_NON_HT_STA_PRSNT	0x0010
 
 /* MIMO Power Save Modes */
-#define WLAN_HT_CAP_MIMO_PS_STATIC         0
-#define WLAN_HT_CAP_MIMO_PS_DYNAMIC        1
-#define WLAN_HT_CAP_MIMO_PS_INVALID        2
-#define WLAN_HT_CAP_MIMO_PS_DISABLED       3
+#define WLAN_HT_CAP_MIMO_PS_STATIC	0
+#define WLAN_HT_CAP_MIMO_PS_DYNAMIC	1
+#define WLAN_HT_CAP_MIMO_PS_INVALID	2
+#define WLAN_HT_CAP_MIMO_PS_DISABLED	3
 
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
@@ -337,11 +758,21 @@ struct ieee80211_ht_addt_info {
 #define WLAN_CAPABILITY_SHORT_PREAMBLE	(1<<5)
 #define WLAN_CAPABILITY_PBCC		(1<<6)
 #define WLAN_CAPABILITY_CHANNEL_AGILITY	(1<<7)
+
 /* 802.11h */
 #define WLAN_CAPABILITY_SPECTRUM_MGMT	(1<<8)
 #define WLAN_CAPABILITY_QOS		(1<<9)
 #define WLAN_CAPABILITY_SHORT_SLOT_TIME	(1<<10)
 #define WLAN_CAPABILITY_DSSS_OFDM	(1<<13)
+/* measurement */
+#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE	(1<<0)
+#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE	(1<<1)
+#define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED	(1<<2)
+
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC	0
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA	1
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI	2
+
 
 /* 802.11g ERP information element */
 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
@@ -512,6 +943,15 @@ enum ieee80211_category {
 	WLAN_CATEGORY_WMM = 17,
 };
 
+/* SPECTRUM_MGMT action code */
+enum ieee80211_spectrum_mgmt_actioncode {
+	WLAN_ACTION_SPCT_MSR_REQ = 0,
+	WLAN_ACTION_SPCT_MSR_RPRT = 1,
+	WLAN_ACTION_SPCT_TPC_REQ = 2,
+	WLAN_ACTION_SPCT_TPC_RPRT = 3,
+	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+};
+
 /* BACK action code */
 enum ieee80211_back_actioncode {
 	WLAN_ACTION_ADDBA_REQ = 0,
@@ -540,63 +980,57 @@ enum ieee80211_back_parties {
 #define WLAN_MAX_KEY_LEN		32
 
 /**
+ * ieee80211_get_qos_ctl - get pointer to qos control bytes
+ * @hdr: the frame
+ *
+ * The qos ctrl bytes come after the frame_control, duration, seq_num
+ * and 3 or 4 addresses of length ETH_ALEN.
+ * 3 addr: 2 + 2 + 2 + 3*6 = 24
+ * 4 addr: 2 + 2 + 2 + 4*6 = 30
+ */
+static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_has_a4(hdr->frame_control))
+		return (u8 *)hdr + 30;
+	else
+		return (u8 *)hdr + 24;
+}
+
+/**
  * ieee80211_get_SA - get pointer to SA
+ * @hdr: the frame
  *
  * Given an 802.11 frame, this function returns the offset
  * to the source address (SA). It does not verify that the
  * header is long enough to contain the address, and the
  * header must be long enough to contain the frame control
  * field.
- *
- * @hdr: the frame
  */
 static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
 {
-	u8 *raw = (u8 *) hdr;
-	u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */
-
-	switch (tofrom) {
-		case 2:
-			return hdr->addr3;
-		case 3:
-			return hdr->addr4;
-	}
+	if (ieee80211_has_a4(hdr->frame_control))
+		return hdr->addr4;
+	if (ieee80211_has_fromds(hdr->frame_control))
+		return hdr->addr3;
 	return hdr->addr2;
 }
 
 /**
  * ieee80211_get_DA - get pointer to DA
+ * @hdr: the frame
  *
  * Given an 802.11 frame, this function returns the offset
  * to the destination address (DA). It does not verify that
  * the header is long enough to contain the address, and the
  * header must be long enough to contain the frame control
  * field.
- *
- * @hdr: the frame
  */
 static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
 {
-	u8 *raw = (u8 *) hdr;
-	u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */
-
-	if (to_ds)
+	if (ieee80211_has_tods(hdr->frame_control))
 		return hdr->addr3;
-	return hdr->addr1;
-}
-
-/**
- * ieee80211_get_morefrag - determine whether the MOREFRAGS bit is set
- *
- * This function determines whether the "more fragments" bit is set
- * in the frame.
- *
- * @hdr: the frame
- */
-static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr)
-{
-	return (le16_to_cpu(hdr->frame_control) &
-		IEEE80211_FCTL_MOREFRAGS) != 0;
+	else
+		return hdr->addr1;
 }
 
 #endif /* IEEE80211_H */
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index 950e13d09e06..6badb3e2c4e4 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -4,8 +4,6 @@
  *	Authors:
  *	Lennert Buytenhek		<buytenh@gnu.org>
  *
- *	$Id: if_bridge.h,v 1.1 2000/02/18 16:47:01 davem Exp $
- *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
  *	as published by the Free Software Foundation; either version
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index ad09609227ff..18db0668065a 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -43,6 +43,9 @@ struct sockaddr_ll
 #define PACKET_COPY_THRESH		7
 #define PACKET_AUXDATA			8
 #define PACKET_ORIGDEV			9
+#define PACKET_VERSION			10
+#define PACKET_HDRLEN			11
+#define PACKET_RESERVE			12
 
 struct tpacket_stats
 {
@@ -57,6 +60,7 @@ struct tpacket_auxdata
 	__u32		tp_snaplen;
 	__u16		tp_mac;
 	__u16		tp_net;
+	__u16		tp_vlan_tci;
 };
 
 struct tpacket_hdr
@@ -79,6 +83,26 @@ struct tpacket_hdr
 #define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
 #define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
 
+struct tpacket2_hdr
+{
+	__u32		tp_status;
+	__u32		tp_len;
+	__u32		tp_snaplen;
+	__u16		tp_mac;
+	__u16		tp_net;
+	__u32		tp_sec;
+	__u32		tp_nsec;
+	__u16		tp_vlan_tci;
+};
+
+#define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
+
+enum tpacket_versions
+{
+	TPACKET_V1,
+	TPACKET_V2,
+};
+
 /*
    Frame structure:
 
diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h
index 0f2f70d4e48c..c3b1f8562709 100644
--- a/include/linux/if_ppp.h
+++ b/include/linux/if_ppp.h
@@ -1,5 +1,3 @@
-/*	$Id: if_ppp.h,v 1.21 2000/03/27 06:03:36 paulus Exp $	*/
-
 /*
  * if_ppp.h - Point-to-Point Protocol definitions.
  *
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 8c71fe2fb1f5..4c6307ad9fdb 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -11,14 +11,13 @@
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  *  GNU General Public License for more details.
- *
- *  $Id: if_tun.h,v 1.2 2001/06/01 18:39:47 davem Exp $
  */
 
 #ifndef __IF_TUN_H
 #define __IF_TUN_H
 
 #include <linux/types.h>
+#include <linux/if_ether.h>
 
 /* Read queue size */
 #define TUN_READQ_SIZE	500
@@ -33,6 +32,7 @@
 #define TUN_NO_PI	0x0040
 #define TUN_ONE_QUEUE	0x0080
 #define TUN_PERSIST 	0x0100	
+#define TUN_VNET_HDR 	0x0200
 
 /* Ioctl defines */
 #define TUNSETNOCSUM  _IOW('T', 200, int) 
@@ -42,17 +42,43 @@
 #define TUNSETOWNER   _IOW('T', 204, int)
 #define TUNSETLINK    _IOW('T', 205, int)
 #define TUNSETGROUP   _IOW('T', 206, int)
+#define TUNGETFEATURES _IOR('T', 207, unsigned int)
+#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
+#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
 
 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
 #define IFF_TAP		0x0002
 #define IFF_NO_PI	0x1000
 #define IFF_ONE_QUEUE	0x2000
+#define IFF_VNET_HDR	0x4000
+
+/* Features for GSO (TUNSETOFFLOAD). */
+#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
+#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
+#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
+#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
 
+/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
+#define TUN_PKT_STRIP	0x0001
 struct tun_pi {
-	unsigned short flags;
+	__u16  flags;
 	__be16 proto;
 };
-#define TUN_PKT_STRIP	0x0001
+
+/*
+ * Filter spec (used for SETXXFILTER ioctls)
+ * This stuff is applicable only to the TAP (Ethernet) devices.
+ * If the count is zero the filter is disabled and the driver accepts
+ * all packets (promisc mode).
+ * If the filter is enabled in order to accept broadcast packets
+ * broadcast addr must be explicitly included in the addr list.
+ */
+#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
+struct tun_filter {
+	__u16  flags; /* TUN_FLT_ flags see above */
+	__u16  count; /* Number of addresses */
+	__u8   addr[0][ETH_ALEN];
+};
 
 #endif /* __IF_TUN_H */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 15ace02b7b24..9e7b49b8062d 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -14,10 +14,6 @@
 #define _LINUX_IF_VLAN_H_
 
 #ifdef __KERNEL__
-
-/* externally defined structs */
-struct hlist_node;
-
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 
@@ -91,7 +87,7 @@ struct vlan_group {
 };
 
 static inline struct net_device *vlan_group_get_device(struct vlan_group *vg,
-						       unsigned int vlan_id)
+						       u16 vlan_id)
 {
 	struct net_device **array;
 	array = vg->vlan_devices_arrays[vlan_id / VLAN_GROUP_ARRAY_PART_LEN];
@@ -99,7 +95,7 @@ static inline struct net_device *vlan_group_get_device(struct vlan_group *vg,
 }
 
 static inline void vlan_group_set_device(struct vlan_group *vg,
-					 unsigned int vlan_id,
+					 u16 vlan_id,
 					 struct net_device *dev)
 {
 	struct net_device **array;
@@ -109,164 +105,81 @@ static inline void vlan_group_set_device(struct vlan_group *vg,
 	array[vlan_id % VLAN_GROUP_ARRAY_PART_LEN] = dev;
 }
 
-struct vlan_priority_tci_mapping {
-	u32 priority;
-	unsigned short vlan_qos; /* This should be shifted when first set, so we only do it
-				  * at provisioning time.
-				  * ((skb->priority << 13) & 0xE000)
-				  */
-	struct vlan_priority_tci_mapping *next;
-};
+#define vlan_tx_tag_present(__skb)	((__skb)->vlan_tci)
+#define vlan_tx_tag_get(__skb)		((__skb)->vlan_tci)
 
-/* Holds information that makes sense if this device is a VLAN device. */
-struct vlan_dev_info {
-	/** This will be the mapping that correlates skb->priority to
-	 * 3 bits of VLAN QOS tags...
-	 */
-	unsigned int nr_ingress_mappings;
-	u32 ingress_priority_map[8];
-
-	unsigned int nr_egress_mappings;
-	struct vlan_priority_tci_mapping *egress_priority_map[16]; /* hash table */
-
-	unsigned short vlan_id;        /*  The VLAN Identifier for this interface. */
-	unsigned short flags;          /* (1 << 0) re_order_header   This option will cause the
-                                        *   VLAN code to move around the ethernet header on
-                                        *   ingress to make the skb look **exactly** like it
-                                        *   came in from an ethernet port.  This destroys some of
-                                        *   the VLAN information in the skb, but it fixes programs
-                                        *   like DHCP that use packet-filtering and don't understand
-                                        *   802.1Q
-                                        */
-	struct net_device *real_dev;    /* the underlying device/interface */
-	unsigned char real_dev_addr[ETH_ALEN];
-	struct proc_dir_entry *dent;    /* Holds the proc data */
-	unsigned long cnt_inc_headroom_on_tx; /* How many times did we have to grow the skb on TX. */
-	unsigned long cnt_encap_on_xmit;      /* How many times did we have to encapsulate the skb on TX. */
-};
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+extern struct net_device *vlan_dev_real_dev(const struct net_device *dev);
+extern u16 vlan_dev_vlan_id(const struct net_device *dev);
 
-static inline struct vlan_dev_info *vlan_dev_info(const struct net_device *dev)
+extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
+			     u16 vlan_tci, int polling);
+#else
+static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
 {
-	return netdev_priv(dev);
+	BUG();
+	return NULL;
 }
 
-/* inline functions */
-static inline __u32 vlan_get_ingress_priority(struct net_device *dev,
-					      unsigned short vlan_tag)
+static inline u16 vlan_dev_vlan_id(const struct net_device *dev)
 {
-	struct vlan_dev_info *vip = vlan_dev_info(dev);
-
-	return vip->ingress_priority_map[(vlan_tag >> 13) & 0x7];
+	BUG();
+	return 0;
 }
 
-/* VLAN tx hw acceleration helpers. */
-struct vlan_skb_tx_cookie {
-	u32	magic;
-	u32	vlan_tag;
-};
-
-#define VLAN_TX_COOKIE_MAGIC	0x564c414e	/* "VLAN" in ascii. */
-#define VLAN_TX_SKB_CB(__skb)	((struct vlan_skb_tx_cookie *)&((__skb)->cb[0]))
-#define vlan_tx_tag_present(__skb) \
-	(VLAN_TX_SKB_CB(__skb)->magic == VLAN_TX_COOKIE_MAGIC)
-#define vlan_tx_tag_get(__skb)	(VLAN_TX_SKB_CB(__skb)->vlan_tag)
-
-/* VLAN rx hw acceleration helper.  This acts like netif_{rx,receive_skb}(). */
-static inline int __vlan_hwaccel_rx(struct sk_buff *skb,
-				    struct vlan_group *grp,
-				    unsigned short vlan_tag, int polling)
+static inline int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
+				    u16 vlan_tci, int polling)
 {
-	struct net_device_stats *stats;
-
-	if (skb_bond_should_drop(skb)) {
-		dev_kfree_skb_any(skb);
-		return NET_RX_DROP;
-	}
-
-	skb->dev = vlan_group_get_device(grp, vlan_tag & VLAN_VID_MASK);
-	if (skb->dev == NULL) {
-		dev_kfree_skb_any(skb);
-
-		/* Not NET_RX_DROP, this is not being dropped
-		 * due to congestion.
-		 */
-		return 0;
-	}
-
-	skb->dev->last_rx = jiffies;
-
-	stats = &skb->dev->stats;
-	stats->rx_packets++;
-	stats->rx_bytes += skb->len;
-
-	skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tag);
-	switch (skb->pkt_type) {
-	case PACKET_BROADCAST:
-		break;
-
-	case PACKET_MULTICAST:
-		stats->multicast++;
-		break;
-
-	case PACKET_OTHERHOST:
-		/* Our lower layer thinks this is not local, let's make sure.
-		 * This allows the VLAN to have a different MAC than the underlying
-		 * device, and still route correctly.
-		 */
-		if (!compare_ether_addr(eth_hdr(skb)->h_dest,
-				       	skb->dev->dev_addr))
-			skb->pkt_type = PACKET_HOST;
-		break;
-	};
-
-	return (polling ? netif_receive_skb(skb) : netif_rx(skb));
+	BUG();
+	return NET_XMIT_SUCCESS;
 }
+#endif
 
+/**
+ * vlan_hwaccel_rx - netif_rx wrapper for VLAN RX acceleration
+ * @skb: buffer
+ * @grp: vlan group
+ * @vlan_tci: VLAN TCI as received from the card
+ */
 static inline int vlan_hwaccel_rx(struct sk_buff *skb,
 				  struct vlan_group *grp,
-				  unsigned short vlan_tag)
+				  u16 vlan_tci)
 {
-	return __vlan_hwaccel_rx(skb, grp, vlan_tag, 0);
+	return __vlan_hwaccel_rx(skb, grp, vlan_tci, 0);
 }
 
+/**
+ * vlan_hwaccel_receive_skb - netif_receive_skb wrapper for VLAN RX acceleration
+ * @skb: buffer
+ * @grp: vlan group
+ * @vlan_tci: VLAN TCI as received from the card
+ */
 static inline int vlan_hwaccel_receive_skb(struct sk_buff *skb,
 					   struct vlan_group *grp,
-					   unsigned short vlan_tag)
+					   u16 vlan_tci)
 {
-	return __vlan_hwaccel_rx(skb, grp, vlan_tag, 1);
+	return __vlan_hwaccel_rx(skb, grp, vlan_tci, 1);
 }
 
 /**
  * __vlan_put_tag - regular VLAN tag inserting
  * @skb: skbuff to tag
- * @tag: VLAN tag to insert
+ * @vlan_tci: VLAN TCI to insert
  *
  * Inserts the VLAN tag into @skb as part of the payload
  * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
- * 
+ *
  * Following the skb_unshare() example, in case of error, the calling function
  * doesn't have to worry about freeing the original skb.
  */
-static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, unsigned short tag)
+static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
 {
 	struct vlan_ethhdr *veth;
 
-	if (skb_headroom(skb) < VLAN_HLEN) {
-		struct sk_buff *sk_tmp = skb;
-		skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
-		kfree_skb(sk_tmp);
-		if (!skb) {
-			printk(KERN_ERR "vlan: failed to realloc headroom\n");
-			return NULL;
-		}
-	} else {
-		skb = skb_unshare(skb, GFP_ATOMIC);
-		if (!skb) {
-			printk(KERN_ERR "vlan: failed to unshare skbuff\n");
-			return NULL;
-		}
+	if (skb_cow_head(skb, VLAN_HLEN) < 0) {
+		kfree_skb(skb);
+		return NULL;
 	}
-
 	veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN);
 
 	/* Move the mac addresses to the beginning of the new header. */
@@ -275,12 +188,10 @@ static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, unsigned short
 	/* first, the ethernet type */
 	veth->h_vlan_proto = htons(ETH_P_8021Q);
 
-	/* now, the tag */
-	veth->h_vlan_TCI = htons(tag);
+	/* now, the TCI */
+	veth->h_vlan_TCI = htons(vlan_tci);
 
 	skb->protocol = htons(ETH_P_8021Q);
-	skb->mac_header -= VLAN_HLEN;
-	skb->network_header -= VLAN_HLEN;
 
 	return skb;
 }
@@ -288,18 +199,14 @@ static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, unsigned short
 /**
  * __vlan_hwaccel_put_tag - hardware accelerated VLAN inserting
  * @skb: skbuff to tag
- * @tag: VLAN tag to insert
+ * @vlan_tci: VLAN TCI to insert
  *
- * Puts the VLAN tag in @skb->cb[] and lets the device do the rest
+ * Puts the VLAN TCI in @skb->vlan_tci and lets the device do the rest
  */
-static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb, unsigned short tag)
+static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb,
+						     u16 vlan_tci)
 {
-	struct vlan_skb_tx_cookie *cookie;
-
-	cookie = VLAN_TX_SKB_CB(skb);
-	cookie->magic = VLAN_TX_COOKIE_MAGIC;
-	cookie->vlan_tag = tag;
-
+	skb->vlan_tci = vlan_tci;
 	return skb;
 }
 
@@ -308,28 +215,28 @@ static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb, unsign
 /**
  * vlan_put_tag - inserts VLAN tag according to device features
  * @skb: skbuff to tag
- * @tag: VLAN tag to insert
+ * @vlan_tci: VLAN TCI to insert
  *
  * Assumes skb->dev is the target that will xmit this frame.
  * Returns a VLAN tagged skb.
  */
-static inline struct sk_buff *vlan_put_tag(struct sk_buff *skb, unsigned short tag)
+static inline struct sk_buff *vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
 {
 	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
-		return __vlan_hwaccel_put_tag(skb, tag);
+		return __vlan_hwaccel_put_tag(skb, vlan_tci);
 	} else {
-		return __vlan_put_tag(skb, tag);
+		return __vlan_put_tag(skb, vlan_tci);
 	}
 }
 
 /**
  * __vlan_get_tag - get the VLAN ID that is part of the payload
  * @skb: skbuff to query
- * @tag: buffer to store vlaue
- * 
+ * @vlan_tci: buffer to store vlaue
+ *
  * Returns error if the skb is not of VLAN type
  */
-static inline int __vlan_get_tag(const struct sk_buff *skb, unsigned short *tag)
+static inline int __vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
 {
 	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb->data;
 
@@ -337,29 +244,25 @@ static inline int __vlan_get_tag(const struct sk_buff *skb, unsigned short *tag)
 		return -EINVAL;
 	}
 
-	*tag = ntohs(veth->h_vlan_TCI);
-
+	*vlan_tci = ntohs(veth->h_vlan_TCI);
 	return 0;
 }
 
 /**
  * __vlan_hwaccel_get_tag - get the VLAN ID that is in @skb->cb[]
  * @skb: skbuff to query
- * @tag: buffer to store vlaue
- * 
- * Returns error if @skb->cb[] is not set correctly
+ * @vlan_tci: buffer to store vlaue
+ *
+ * Returns error if @skb->vlan_tci is not set correctly
  */
 static inline int __vlan_hwaccel_get_tag(const struct sk_buff *skb,
-					 unsigned short *tag)
+					 u16 *vlan_tci)
 {
-	struct vlan_skb_tx_cookie *cookie;
-
-	cookie = VLAN_TX_SKB_CB(skb);
-	if (cookie->magic == VLAN_TX_COOKIE_MAGIC) {
-		*tag = cookie->vlan_tag;
+	if (vlan_tx_tag_present(skb)) {
+		*vlan_tci = skb->vlan_tci;
 		return 0;
 	} else {
-		*tag = 0;
+		*vlan_tci = 0;
 		return -EINVAL;
 	}
 }
@@ -369,16 +272,16 @@ static inline int __vlan_hwaccel_get_tag(const struct sk_buff *skb,
 /**
  * vlan_get_tag - get the VLAN ID from the skb
  * @skb: skbuff to query
- * @tag: buffer to store vlaue
- * 
+ * @vlan_tci: buffer to store vlaue
+ *
  * Returns error if the skb is not VLAN tagged
  */
-static inline int vlan_get_tag(const struct sk_buff *skb, unsigned short *tag)
+static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
 {
 	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
-		return __vlan_hwaccel_get_tag(skb, tag);
+		return __vlan_hwaccel_get_tag(skb, vlan_tci);
 	} else {
-		return __vlan_get_tag(skb, tag);
+		return __vlan_get_tag(skb, vlan_tci);
 	}
 }
 
@@ -402,6 +305,7 @@ enum vlan_ioctl_cmds {
 
 enum vlan_flags {
 	VLAN_FLAG_REORDER_HDR	= 0x1,
+	VLAN_FLAG_GVRP		= 0x2,
 };
 
 enum vlan_name_types {
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index f5a1a0db2e8e..7bb3c095c15b 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -228,7 +228,6 @@ extern int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 extern int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
 		struct group_filter __user *optval, int __user *optlen);
 extern int ip_mc_sf_allow(struct sock *sk, __be32 local, __be32 rmt, int dif);
-extern void ip_mr_init(void);
 extern void ip_mc_init_dev(struct in_device *);
 extern void ip_mc_destroy_dev(struct in_device *);
 extern void ip_mc_up(struct in_device *);
diff --git a/include/linux/ihex.h b/include/linux/ihex.h
index 2baace2788a7..31d8629e75a1 100644
--- a/include/linux/ihex.h
+++ b/include/linux/ihex.h
@@ -18,7 +18,7 @@ struct ihex_binrec {
 	__be32 addr;
 	__be16 len;
 	uint8_t data[0];
-} __attribute__((aligned(4)));
+} __attribute__((packed));
 
 /* Find the next record, taking into account the 4-byte alignment */
 static inline const struct ihex_binrec *
diff --git a/include/linux/init.h b/include/linux/init.h
index 21d658cdfa27..11b84e106053 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -170,6 +170,13 @@ extern void (*late_time_init)(void);
 	__attribute__((__section__(".initcall" level ".init"))) = fn
 
 /*
+ * Early initcalls run before initializing SMP.
+ *
+ * Only for built-in code, not modules.
+ */
+#define early_initcall(fn)		__define_initcall("early",fn,early)
+
+/*
  * A "pure" initcall has no dependencies on anything else, and purely
  * initializes variables that couldn't be statically initialized.
  *
@@ -275,13 +282,7 @@ void __init parse_early_param(void);
 
 #define security_initcall(fn)		module_init(fn)
 
-/* These macros create a dummy inline: gcc 2.9x does not count alias
- as usage, hence the `unused function' warning when __init functions
- are declared static. We use the dummy __*_module_inline functions
- both to kill the warning and check the type of the init/cleanup
- function. */
-
-/* Each module must use one module_init(), or one no_module_init */
+/* Each module must use one module_init(). */
 #define module_init(initfn)					\
 	static inline initcall_t __inittest(void)		\
 	{ return initfn; }					\
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 93c45acf249a..021d8e720c79 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -122,7 +122,7 @@ extern struct group_info init_groups;
 	.state		= 0,						\
 	.stack		= &init_thread_info,				\
 	.usage		= ATOMIC_INIT(2),				\
-	.flags		= 0,						\
+	.flags		= PF_KTHREAD,					\
 	.lock_depth	= -1,						\
 	.prio		= MAX_PRIO-20,					\
 	.static_prio	= MAX_PRIO-20,					\
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index 742b917e7d1b..bd578578a8b9 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -7,6 +7,8 @@
 #ifndef _LINUX_INOTIFY_H
 #define _LINUX_INOTIFY_H
 
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
 #include <linux/types.h>
 
 /*
@@ -63,6 +65,10 @@ struct inotify_event {
 			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
 			 IN_MOVE_SELF)
 
+/* Flags for sys_inotify_init1.  */
+#define IN_CLOEXEC O_CLOEXEC
+#define IN_NONBLOCK O_NONBLOCK
+
 #ifdef __KERNEL__
 
 #include <linux/dcache.h>
diff --git a/include/linux/input.h b/include/linux/input.h
index d150c57e5f0a..a5802c9c81a4 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -373,6 +373,8 @@ struct input_absinfo {
 
 #define KEY_WIMAX		246
 
+/* Range 248 - 255 is reserved for special needs of AT keyboard driver */
+
 #define BTN_MISC		0x100
 #define BTN_0			0x100
 #define BTN_1			0x101
@@ -640,6 +642,8 @@ struct input_absinfo {
 #define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
 					 set = radio enabled */
 #define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
+#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
+#define SW_DOCK			0x05  /* set = plugged into dock */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)
 
@@ -1215,11 +1219,6 @@ struct input_handle {
 	struct list_head	h_node;
 };
 
-#define to_dev(n) container_of(n, struct input_dev, node)
-#define to_handler(n) container_of(n, struct input_handler, node)
-#define to_handle(n) container_of(n, struct input_handle, d_node)
-#define to_handle_h(n) container_of(n, struct input_handle, h_node)
-
 struct input_dev *input_allocate_device(void);
 void input_free_device(struct input_dev *dev);
 
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 62aa4f895abe..58ff4e74b2f3 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -223,35 +223,6 @@ static inline int disable_irq_wake(unsigned int irq)
 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
 #endif
 
-/*
- * Temporary defines for UP kernels, until all code gets fixed.
- */
-#ifndef CONFIG_SMP
-static inline void __deprecated cli(void)
-{
-	local_irq_disable();
-}
-static inline void __deprecated sti(void)
-{
-	local_irq_enable();
-}
-static inline void __deprecated save_flags(unsigned long *x)
-{
-	local_save_flags(*x);
-}
-#define save_flags(x) save_flags(&x)
-static inline void __deprecated restore_flags(unsigned long x)
-{
-	local_irq_restore(x);
-}
-
-static inline void __deprecated save_and_cli(unsigned long *x)
-{
-	local_irq_save(*x);
-}
-#define save_and_cli(x)	save_and_cli(&x)
-#endif /* CONFIG_SMP */
-
 /* Some architectures might implement lazy enabling/disabling of
  * interrupts. In some cases, such as stop_machine, we might want
  * to ensure that after a local_irq_disable(), interrupts have
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 2cd07cc29687..22d2115458c6 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -118,6 +118,10 @@ extern int allocate_resource(struct resource *root, struct resource *new,
 int adjust_resource(struct resource *res, resource_size_t start,
 		    resource_size_t size);
 resource_size_t resource_alignment(struct resource *res);
+static inline resource_size_t resource_size(struct resource *res)
+{
+	return res->end - res->start + 1;
+}
 
 /* Convenience shorthand with allocation */
 #define request_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name))
diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h
index af3f4a70f3df..1e7cc4af40de 100644
--- a/include/linux/ip6_tunnel.h
+++ b/include/linux/ip6_tunnel.h
@@ -1,7 +1,3 @@
-/*
- * $Id$
- */
-
 #ifndef _IP6_TUNNEL_H
 #define _IP6_TUNNEL_H
 
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
new file mode 100644
index 000000000000..ec6eb49af2d8
--- /dev/null
+++ b/include/linux/ip_vs.h
@@ -0,0 +1,245 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _IP_VS_H
+#define _IP_VS_H
+
+#include <linux/types.h>	/* For __beXX types in userland */
+
+#define IP_VS_VERSION_CODE	0x010201
+#define NVERSION(version)			\
+	(version >> 16) & 0xFF,			\
+	(version >> 8) & 0xFF,			\
+	version & 0xFF
+
+/*
+ *      Virtual Service Flags
+ */
+#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
+#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
+
+/*
+ *      Destination Server Flags
+ */
+#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
+#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
+
+/*
+ *      IPVS sync daemon states
+ */
+#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
+#define IP_VS_STATE_MASTER	0x0001		/* started as master */
+#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
+
+/*
+ *      IPVS socket options
+ */
+#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
+
+#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
+#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
+#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
+#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
+#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
+#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
+#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
+#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
+#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
+#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
+#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
+
+#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
+#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
+#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
+
+
+/*
+ *      IPVS Connection Flags
+ */
+#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
+#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
+#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
+#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
+#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
+#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
+#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
+#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
+#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
+#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
+#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
+#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
+#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
+#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
+#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
+
+#define IP_VS_SCHEDNAME_MAXLEN	16
+#define IP_VS_IFNAME_MAXLEN	16
+
+
+/*
+ *	The struct ip_vs_service_user and struct ip_vs_dest_user are
+ *	used to set IPVS rules through setsockopt.
+ */
+struct ip_vs_service_user {
+	/* virtual service addresses */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual ip address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* virtual service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;		/* virtual service flags */
+	unsigned		timeout;	/* persistent timeout in sec */
+	__be32			netmask;	/* persistent netmask */
+};
+
+
+struct ip_vs_dest_user {
+	/* destination server address */
+	__be32			addr;
+	__be16			port;
+
+	/* real server options */
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	/* thresholds for active connections */
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+};
+
+
+/*
+ *	IPVS statistics object (for user space)
+ */
+struct ip_vs_stats_user
+{
+	__u32                   conns;          /* connections scheduled */
+	__u32                   inpkts;         /* incoming packets */
+	__u32                   outpkts;        /* outgoing packets */
+	__u64                   inbytes;        /* incoming bytes */
+	__u64                   outbytes;       /* outgoing bytes */
+
+	__u32			cps;		/* current connection rate */
+	__u32			inpps;		/* current in packet rate */
+	__u32			outpps;		/* current out packet rate */
+	__u32			inbps;		/* current in byte rate */
+	__u32			outbps;		/* current out byte rate */
+};
+
+
+/* The argument to IP_VS_SO_GET_INFO */
+struct ip_vs_getinfo {
+	/* version number */
+	unsigned int		version;
+
+	/* size of connection hash table */
+	unsigned int		size;
+
+	/* number of virtual services */
+	unsigned int		num_services;
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICE */
+struct ip_vs_service_entry {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;          /* virtual service flags */
+	unsigned		timeout;	/* persistent timeout */
+	__be32			netmask;	/* persistent netmask */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+struct ip_vs_dest_entry {
+	__be32			addr;		/* destination address */
+	__be16			port;
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	u_int32_t		u_threshold;	/* upper threshold */
+	u_int32_t		l_threshold;	/* lower threshold */
+
+	u_int32_t		activeconns;	/* active connections */
+	u_int32_t		inactconns;	/* inactive connections */
+	u_int32_t		persistconns;	/* persistent connections */
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+/* The argument to IP_VS_SO_GET_DESTS */
+struct ip_vs_get_dests {
+	/* which service: user fills in these */
+	u_int16_t		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	u_int32_t		fwmark;		/* firwall mark of service */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* the real servers */
+	struct ip_vs_dest_entry	entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICES */
+struct ip_vs_get_services {
+	/* number of virtual services */
+	unsigned int		num_services;
+
+	/* service table */
+	struct ip_vs_service_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_TIMEOUT */
+struct ip_vs_timeout_user {
+	int			tcp_timeout;
+	int			tcp_fin_timeout;
+	int			udp_timeout;
+};
+
+
+/* The argument to IP_VS_SO_GET_DAEMON */
+struct ip_vs_daemon_user {
+	/* sync daemon state (master/backup) */
+	int			state;
+
+	/* multicast interface name */
+	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
+
+	/* SyncID we belong to */
+	int			syncid;
+};
+
+#endif	/* _IP_VS_H */
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index ea6c18a8b0d4..ea330f9e7100 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -36,6 +36,7 @@ struct ipc_namespace {
 	int		msg_ctlmni;
 	atomic_t	msg_bytes;
 	atomic_t	msg_hdrs;
+	int		auto_msgmni;
 
 	size_t		shm_ctlmax;
 	size_t		shm_ctlall;
@@ -53,7 +54,7 @@ extern atomic_t nr_ipc_ns;
 
 extern int register_ipcns_notifier(struct ipc_namespace *);
 extern int cond_register_ipcns_notifier(struct ipc_namespace *);
-extern int unregister_ipcns_notifier(struct ipc_namespace *);
+extern void unregister_ipcns_notifier(struct ipc_namespace *);
 extern int ipcns_notify(unsigned long);
 
 #else /* CONFIG_SYSVIPC */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index cde056e08181..641e026eee8f 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -123,6 +123,7 @@ struct ipv6hdr {
 	struct	in6_addr	daddr;
 };
 
+#ifdef __KERNEL__
 /*
  * This structure contains configuration options per IPv6 link.
  */
@@ -163,8 +164,11 @@ struct ipv6_devconf {
 #ifdef CONFIG_IPV6_MROUTE
 	__s32		mc_forwarding;
 #endif
+	__s32		disable_ipv6;
+	__s32		accept_dad;
 	void		*sysctl;
 };
+#endif
 
 /* index values for the variables in ipv6_devconf */
 enum {
@@ -194,6 +198,8 @@ enum {
 	DEVCONF_OPTIMISTIC_DAD,
 	DEVCONF_ACCEPT_SOURCE_ROUTE,
 	DEVCONF_MC_FORWARDING,
+	DEVCONF_DISABLE_IPV6,
+	DEVCONF_ACCEPT_DAD,
 	DEVCONF_MAX
 };
 
diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h
index 2b1c2e58566e..74bde13224c9 100644
--- a/include/linux/irqflags.h
+++ b/include/linux/irqflags.h
@@ -11,6 +11,8 @@
 #ifndef _LINUX_TRACE_IRQFLAGS_H
 #define _LINUX_TRACE_IRQFLAGS_H
 
+#include <linux/typecheck.h>
+
 #ifdef CONFIG_TRACE_IRQFLAGS
   extern void trace_softirqs_on(unsigned long ip);
   extern void trace_softirqs_off(unsigned long ip);
@@ -58,18 +60,24 @@
 	do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
 #define local_irq_disable() \
 	do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
-#define local_irq_save(flags) \
-	do { raw_local_irq_save(flags); trace_hardirqs_off(); } while (0)
+#define local_irq_save(flags)				\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		raw_local_irq_save(flags);		\
+		trace_hardirqs_off();			\
+	} while (0)
 
-#define local_irq_restore(flags)				\
-	do {							\
-		if (raw_irqs_disabled_flags(flags)) {		\
-			raw_local_irq_restore(flags);		\
-			trace_hardirqs_off();			\
-		} else {					\
-			trace_hardirqs_on();			\
-			raw_local_irq_restore(flags);		\
-		}						\
+
+#define local_irq_restore(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		if (raw_irqs_disabled_flags(flags)) {	\
+			raw_local_irq_restore(flags);	\
+			trace_hardirqs_off();		\
+		} else {				\
+			trace_hardirqs_on();		\
+			raw_local_irq_restore(flags);	\
+		}					\
 	} while (0)
 #else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */
 /*
@@ -78,8 +86,16 @@
  */
 # define raw_local_irq_disable()	local_irq_disable()
 # define raw_local_irq_enable()		local_irq_enable()
-# define raw_local_irq_save(flags)	local_irq_save(flags)
-# define raw_local_irq_restore(flags)	local_irq_restore(flags)
+# define raw_local_irq_save(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		local_irq_save(flags);			\
+	} while (0)
+# define raw_local_irq_restore(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		local_irq_restore(flags);		\
+	} while (0)
 #endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
 
 #ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
@@ -89,7 +105,11 @@
 		raw_safe_halt();				\
 	} while (0)
 
-#define local_save_flags(flags)		raw_local_save_flags(flags)
+#define local_save_flags(flags)				\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		raw_local_save_flags(flags);		\
+	} while (0)
 
 #define irqs_disabled()						\
 ({								\
@@ -99,7 +119,11 @@
 	raw_irqs_disabled_flags(_flags);			\
 })
 
-#define irqs_disabled_flags(flags)	raw_irqs_disabled_flags(flags)
+#define irqs_disabled_flags(flags)		\
+({						\
+	typecheck(unsigned long, flags);	\
+	raw_irqs_disabled_flags(flags);		\
+})
 #endif		/* CONFIG_X86 */
 
 #endif
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
index 5a84fe944b74..0d1840723249 100644
--- a/include/linux/istallion.h
+++ b/include/linux/istallion.h
@@ -51,25 +51,21 @@
  */
 struct stliport {
 	unsigned long		magic;
+	struct tty_port		port;
 	unsigned int		portnr;
 	unsigned int		panelnr;
 	unsigned int		brdnr;
 	unsigned long		state;
 	unsigned int		devnr;
-	int			flags;
 	int			baud_base;
 	int			custom_divisor;
 	int			close_delay;
 	int			closing_wait;
-	int			refcount;
 	int			openwaitcnt;
 	int			rc;
 	int			argsize;
 	void			*argp;
 	unsigned int		rxmarkmsk;
-	struct tty_struct	*tty;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
 	wait_queue_head_t	raw_wait;
 	struct asysigs		asig;
 	unsigned long		addr;
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
index 6b563cae23df..da720bc3eb15 100644
--- a/include/linux/jffs2.h
+++ b/include/linux/jffs2.h
@@ -7,9 +7,6 @@
  *
  * For licensing information, see the file 'LICENCE' in the
  * jffs2 directory.
- *
- * $Id: jffs2.h,v 1.38 2005/09/26 11:37:23 havasi Exp $
- *
  */
 
 #ifndef __LINUX_JFFS2_H__
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index e2d3a18af456..b5e051295a67 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -2,8 +2,6 @@
 #define _LINUX_JOYSTICK_H
 
 /*
- * $Id: joystick.h,v 1.3 2000/11/30 11:07:05 vojtech Exp $
- *
  *  Copyright (C) 1996-2000 Vojtech Pavlik
  *
  *  Sponsored by SuSE
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 00c1801099fa..b96144887444 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -6,6 +6,7 @@
 #define _LINUX_KALLSYMS_H
 
 #include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/stddef.h>
 
 #define KSYM_NAME_LEN 128
@@ -105,18 +106,9 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr)
 	print_symbol(fmt, (unsigned long)addr);
 }
 
-#ifndef CONFIG_64BIT
-#define print_ip_sym(ip)		\
-do {					\
-	printk("[<%08lx>]", ip);	\
-	print_symbol(" %s\n", ip);	\
-} while(0)
-#else
-#define print_ip_sym(ip)		\
-do {					\
-	printk("[<%016lx>]", ip);	\
-	print_symbol(" %s\n", ip);	\
-} while(0)
-#endif
+static inline void print_ip_sym(unsigned long ip)
+{
+	printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
+}
 
 #endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f9cd7a513f9c..aaa998f65c7a 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -14,6 +14,8 @@
 #include <linux/compiler.h>
 #include <linux/bitops.h>
 #include <linux/log2.h>
+#include <linux/typecheck.h>
+#include <linux/ratelimit.h>
 #include <asm/byteorder.h>
 #include <asm/bug.h>
 
@@ -73,6 +75,12 @@ extern const char linux_proc_banner[];
  */
 #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
 
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
 #define	KERN_EMERG	"<0>"	/* system is unusable			*/
 #define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
 #define	KERN_CRIT	"<2>"	/* critical conditions			*/
@@ -188,11 +196,8 @@ asmlinkage int vprintk(const char *fmt, va_list args)
 asmlinkage int printk(const char * fmt, ...)
 	__attribute__ ((format (printf, 1, 2))) __cold;
 
-extern int printk_ratelimit_jiffies;
-extern int printk_ratelimit_burst;
+extern struct ratelimit_state printk_ratelimit_state;
 extern int printk_ratelimit(void);
-extern int __ratelimit(int ratelimit_jiffies, int ratelimit_burst);
-extern int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst);
 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
 				   unsigned int interval_msec);
 #else
@@ -203,8 +208,6 @@ static inline int printk(const char *s, ...)
 	__attribute__ ((format (printf, 1, 2)));
 static inline int __cold printk(const char *s, ...) { return 0; }
 static inline int printk_ratelimit(void) { return 0; }
-static inline int __printk_ratelimit(int ratelimit_jiffies, \
-				     int ratelimit_burst) { return 0; }
 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
 					  unsigned int interval_msec)	\
 		{ return false; }
@@ -441,26 +444,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
 	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
 	(type *)( (char *)__mptr - offsetof(type,member) );})
 
-/*
- * Check at compile time that something is of a particular type.
- * Always evaluates to 1 so you may use it easily in comparisons.
- */
-#define typecheck(type,x) \
-({	type __dummy; \
-	typeof(x) __dummy2; \
-	(void)(&__dummy == &__dummy2); \
-	1; \
-})
-
-/*
- * Check at compile time that 'function' is a certain type, or is a pointer
- * to that type (needs to use typedef for the function type.)
- */
-#define typecheck_fn(type,function) \
-({	typeof(type) __tmp = function; \
-	(void)__tmp; \
-})
-
 struct sysinfo;
 extern int do_sysinfo(struct sysinfo *info);
 
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 3265968cd2cd..32110cede64f 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -83,6 +83,7 @@ struct kimage {
 
 	unsigned long start;
 	struct page *control_code_page;
+	struct page *swap_page;
 
 	unsigned long nr_segments;
 	struct kexec_segment segment[KEXEC_SEGMENT_MAX];
@@ -98,18 +99,20 @@ struct kimage {
 	unsigned int type : 1;
 #define KEXEC_TYPE_DEFAULT 0
 #define KEXEC_TYPE_CRASH   1
+	unsigned int preserve_context : 1;
 };
 
 
 
 /* kexec interface functions */
-extern NORET_TYPE void machine_kexec(struct kimage *image) ATTRIB_NORET;
+extern void machine_kexec(struct kimage *image);
 extern int machine_kexec_prepare(struct kimage *image);
 extern void machine_kexec_cleanup(struct kimage *image);
 extern asmlinkage long sys_kexec_load(unsigned long entry,
 					unsigned long nr_segments,
 					struct kexec_segment __user *segments,
 					unsigned long flags);
+extern int kernel_kexec(void);
 #ifdef CONFIG_COMPAT
 extern asmlinkage long compat_sys_kexec_load(unsigned long entry,
 				unsigned long nr_segments,
@@ -127,8 +130,8 @@ void vmcoreinfo_append_str(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
 unsigned long paddr_vmcoreinfo_note(void);
 
-#define VMCOREINFO_OSRELEASE(name) \
-	vmcoreinfo_append_str("OSRELEASE=%s\n", #name)
+#define VMCOREINFO_OSRELEASE(value) \
+	vmcoreinfo_append_str("OSRELEASE=%s\n", value)
 #define VMCOREINFO_PAGESIZE(value) \
 	vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
 #define VMCOREINFO_SYMBOL(name) \
@@ -156,8 +159,9 @@ extern struct kimage *kexec_crash_image;
 #define kexec_flush_icache_page(page)
 #endif
 
-#define KEXEC_ON_CRASH  0x00000001
-#define KEXEC_ARCH_MASK 0xffff0000
+#define KEXEC_ON_CRASH		0x00000001
+#define KEXEC_PRESERVE_CONTEXT	0x00000002
+#define KEXEC_ARCH_MASK		0xffff0000
 
 /* These values match the ELF architecture values.
  * Unless there is a good reason that should continue to be the case.
@@ -174,7 +178,12 @@ extern struct kimage *kexec_crash_image;
 #define KEXEC_ARCH_MIPS_LE (10 << 16)
 #define KEXEC_ARCH_MIPS    ( 8 << 16)
 
-#define KEXEC_FLAGS    (KEXEC_ON_CRASH)  /* List of defined/legal kexec flags */
+/* List of defined/legal kexec flags */
+#ifndef CONFIG_KEXEC_JUMP
+#define KEXEC_FLAGS    KEXEC_ON_CRASH
+#else
+#define KEXEC_FLAGS    (KEXEC_ON_CRASH | KEXEC_PRESERVE_CONTEXT)
+#endif
 
 #define VMCOREINFO_BYTES           (4096)
 #define VMCOREINFO_NOTE_NAME       "VMCOREINFO"
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 5dc13848891b..a1a91577813c 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -19,29 +19,31 @@
  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/gfp.h>
 #include <linux/stddef.h>
 #include <linux/errno.h>
 #include <linux/compiler.h>
 
 #define KMOD_PATH_LEN 256
 
-#ifdef CONFIG_KMOD
+#ifdef CONFIG_MODULES
 /* modprobe exit status on success, -ve on error.  Return value
  * usually useless though. */
 extern int request_module(const char * name, ...) __attribute__ ((format (printf, 1, 2)));
+#define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x)))
 #else
 static inline int request_module(const char * name, ...) { return -ENOSYS; }
+#define try_then_request_module(x, mod...) (x)
 #endif
 
-#define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x)))
 
 struct key;
 struct file;
 struct subprocess_info;
 
 /* Allocate a subprocess_info structure */
-struct subprocess_info *call_usermodehelper_setup(char *path,
-						  char **argv, char **envp);
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+						  char **envp, gfp_t gfp_mask);
 
 /* Set various pieces of state into the subprocess_info structure */
 void call_usermodehelper_setkeys(struct subprocess_info *info,
@@ -68,8 +70,9 @@ static inline int
 call_usermodehelper(char *path, char **argv, char **envp, enum umh_wait wait)
 {
 	struct subprocess_info *info;
+	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
 
-	info = call_usermodehelper_setup(path, argv, envp);
+	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
 	if (info == NULL)
 		return -ENOMEM;
 	return call_usermodehelper_exec(info, wait);
@@ -80,8 +83,9 @@ call_usermodehelper_keys(char *path, char **argv, char **envp,
 			 struct key *session_keyring, enum umh_wait wait)
 {
 	struct subprocess_info *info;
+	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
 
-	info = call_usermodehelper_setup(path, argv, envp);
+	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
 	if (info == NULL)
 		return -ENOMEM;
 
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 39e709f88aa0..5437ac0276e2 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -26,7 +26,6 @@
 #include <linux/wait.h>
 #include <asm/atomic.h>
 
-#define KOBJ_NAME_LEN			20
 #define UEVENT_HELPER_PATH_LEN		256
 #define UEVENT_NUM_ENVP			32	/* number of env pointers */
 #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
@@ -59,12 +58,12 @@ enum kobject_action {
 
 struct kobject {
 	const char		*name;
-	struct kref		kref;
 	struct list_head	entry;
 	struct kobject		*parent;
 	struct kset		*kset;
 	struct kobj_type	*ktype;
 	struct sysfs_dirent	*sd;
+	struct kref		kref;
 	unsigned int state_initialized:1;
 	unsigned int state_in_sysfs:1;
 	unsigned int state_add_uevent_sent:1;
@@ -187,6 +186,8 @@ extern struct kobject *kset_find_obj(struct kset *, const char *);
 
 /* The global /sys/kernel/ kobject for people to chain off of */
 extern struct kobject *kernel_kobj;
+/* The global /sys/kernel/mm/ kobject for people to chain off of */
+extern struct kobject *mm_kobj;
 /* The global /sys/hypervisor/ kobject for people to chain off of */
 extern struct kobject *hypervisor_kobj;
 /* The global /sys/power/ kobject for people to chain off of */
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 04a3556bdea6..0be7795655fa 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -157,11 +157,10 @@ struct kretprobe {
 	int nmissed;
 	size_t data_size;
 	struct hlist_head free_instances;
-	struct hlist_head used_instances;
+	spinlock_t lock;
 };
 
 struct kretprobe_instance {
-	struct hlist_node uflist; /* either on free list or used list */
 	struct hlist_node hlist;
 	struct kretprobe *rp;
 	kprobe_opcode_t *ret_addr;
@@ -201,7 +200,6 @@ static inline int init_test_probes(void)
 }
 #endif /* CONFIG_KPROBES_SANITY_TEST */
 
-extern spinlock_t kretprobe_lock;
 extern struct mutex kprobe_mutex;
 extern int arch_prepare_kprobe(struct kprobe *p);
 extern void arch_arm_kprobe(struct kprobe *p);
@@ -214,6 +212,9 @@ extern void kprobes_inc_nmissed_count(struct kprobe *p);
 
 /* Get the kprobe at this addr (if any) - called with preemption disabled */
 struct kprobe *get_kprobe(void *addr);
+void kretprobe_hash_lock(struct task_struct *tsk,
+			 struct hlist_head **head, unsigned long *flags);
+void kretprobe_hash_unlock(struct task_struct *tsk, unsigned long *flags);
 struct hlist_head * kretprobe_inst_table_head(struct task_struct *tsk);
 
 /* kprobe_running() will just return the current_kprobe on this CPU */
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 00dd957e245b..aabc8a13ba71 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -6,7 +6,8 @@
 
 struct task_struct *kthread_create(int (*threadfn)(void *data),
 				   void *data,
-				   const char namefmt[], ...);
+				   const char namefmt[], ...)
+	__attribute__((format(printf, 3, 4)));
 
 /**
  * kthread_run - create and wake a thread.
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index a281afeddfbb..69511f74f912 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -173,6 +173,30 @@ struct kvm_run {
 	};
 };
 
+/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
+
+struct kvm_coalesced_mmio_zone {
+	__u64 addr;
+	__u32 size;
+	__u32 pad;
+};
+
+struct kvm_coalesced_mmio {
+	__u64 phys_addr;
+	__u32 len;
+	__u32 pad;
+	__u8  data[8];
+};
+
+struct kvm_coalesced_mmio_ring {
+	__u32 first, last;
+	struct kvm_coalesced_mmio coalesced_mmio[0];
+};
+
+#define KVM_COALESCED_MMIO_MAX \
+	((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
+	 sizeof(struct kvm_coalesced_mmio))
+
 /* for KVM_TRANSLATE */
 struct kvm_translation {
 	/* in */
@@ -294,14 +318,14 @@ struct kvm_trace_rec {
 	__u32 vcpu_id;
 	union {
 		struct {
-			__u32 cycle_lo, cycle_hi;
+			__u64 cycle_u64;
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} cycle;
 		struct {
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} nocycle;
 	} u;
-};
+} __attribute__((packed));
 
 #define KVMIO 0xAE
 
@@ -346,6 +370,8 @@ struct kvm_trace_rec {
 #define KVM_CAP_NOP_IO_DELAY 12
 #define KVM_CAP_PV_MMU 13
 #define KVM_CAP_MP_STATE 14
+#define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
 
 /*
  * ioctls for VM fds
@@ -371,6 +397,10 @@ struct kvm_trace_rec {
 #define KVM_CREATE_PIT		  _IO(KVMIO,  0x64)
 #define KVM_GET_PIT		  _IOWR(KVMIO, 0x65, struct kvm_pit_state)
 #define KVM_SET_PIT		  _IOR(KVMIO,  0x66, struct kvm_pit_state)
+#define KVM_REGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
+#define KVM_UNREGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
 
 /*
  * ioctls for vcpu fds
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index de9d1df4bba2..8525afc53107 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -52,7 +52,8 @@ struct kvm_io_bus {
 
 void kvm_io_bus_init(struct kvm_io_bus *bus);
 void kvm_io_bus_destroy(struct kvm_io_bus *bus);
-struct kvm_io_device *kvm_io_bus_find_dev(struct kvm_io_bus *bus, gpa_t addr);
+struct kvm_io_device *kvm_io_bus_find_dev(struct kvm_io_bus *bus,
+					  gpa_t addr, int len, int is_write);
 void kvm_io_bus_register_dev(struct kvm_io_bus *bus,
 			     struct kvm_io_device *dev);
 
@@ -116,6 +117,16 @@ struct kvm {
 	struct kvm_vm_stat stat;
 	struct kvm_arch arch;
 	atomic_t users_count;
+#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
+	struct kvm_coalesced_mmio_dev *coalesced_mmio_dev;
+	struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
+#endif
+
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+	struct mmu_notifier mmu_notifier;
+	unsigned long mmu_notifier_seq;
+	long mmu_notifier_count;
+#endif
 };
 
 /* The guest did something we don't support. */
@@ -135,9 +146,6 @@ void kvm_vcpu_uninit(struct kvm_vcpu *vcpu);
 void vcpu_load(struct kvm_vcpu *vcpu);
 void vcpu_put(struct kvm_vcpu *vcpu);
 
-void decache_vcpus_on_cpu(int cpu);
-
-
 int kvm_init(void *opaque, unsigned int vcpu_size,
 		  struct module *module);
 void kvm_exit(void);
@@ -166,6 +174,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 				struct kvm_userspace_memory_region *mem,
 				struct kvm_memory_slot old,
 				int user_alloc);
+void kvm_arch_flush_shadow(struct kvm *kvm);
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn);
 struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn);
 unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn);
@@ -329,4 +338,22 @@ int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg)
 #define kvm_trace_cleanup() ((void)0)
 #endif
 
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq)
+{
+	if (unlikely(vcpu->kvm->mmu_notifier_count))
+		return 1;
+	/*
+	 * Both reads happen under the mmu_lock and both values are
+	 * modified under mmu_lock, so there's no need of smb_rmb()
+	 * here in between, otherwise mmu_notifier_count should be
+	 * read before mmu_notifier_seq, see
+	 * mmu_notifier_invalidate_range_end write side.
+	 */
+	if (vcpu->kvm->mmu_notifier_seq != mmu_seq)
+		return 1;
+	return 0;
+}
+#endif
+
 #endif
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index 1d379787f2e7..173febac6656 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -47,7 +47,7 @@ struct lcd_ops {
         int (*set_contrast)(struct lcd_device *, int contrast);
 	/* Check if given framebuffer device is the one LCD is bound to;
 	   return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
-	int (*check_fb)(struct fb_info *);
+	int (*check_fb)(struct lcd_device *, struct fb_info *);
 };
 
 struct lcd_device {
diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h
new file mode 100644
index 000000000000..81b4207deb95
--- /dev/null
+++ b/include/linux/leds-pca9532.h
@@ -0,0 +1,45 @@
+/*
+ * pca9532.h - platform data structure for pca9532 led controller
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#ifndef __LINUX_PCA9532_H
+#define __LINUX_PCA9532_H
+
+#include <linux/leds.h>
+
+enum pca9532_state {
+	PCA9532_OFF  = 0x0,
+	PCA9532_ON   = 0x1,
+	PCA9532_PWM0 = 0x2,
+	PCA9532_PWM1 = 0x3
+};
+
+enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED,
+	PCA9532_TYPE_N2100_BEEP };
+
+struct pca9532_led {
+	u8 id;
+	struct i2c_client *client;
+	char *name;
+	struct led_classdev ldev;
+	enum pca9532_type type;
+	enum pca9532_state state;
+};
+
+struct pca9532_platform_data {
+	struct pca9532_led leds[16];
+	u8 pwm[2];
+	u8 psc[2];
+};
+
+#endif /* __LINUX_PCA9532_H */
+
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 519df72e939d..d41ccb56146a 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -48,7 +48,7 @@ struct led_classdev {
 
 	struct device		*dev;
 	struct list_head	 node;			/* LED Device list */
-	char			*default_trigger;	/* Trigger to use */
+	const char		*default_trigger;	/* Trigger to use */
 
 #ifdef CONFIG_LEDS_TRIGGERS
 	/* Protects the trigger data below */
@@ -118,6 +118,20 @@ extern void ledtrig_ide_activity(void);
 #define ledtrig_ide_activity() do {} while(0)
 #endif
 
+/*
+ * Generic LED platform data for describing LED names and default triggers.
+ */
+struct led_info {
+	const char	*name;
+	char		*default_trigger;
+	int		flags;
+};
+
+struct led_platform_data {
+	int		num_leds;
+	struct led_info	*leds;
+};
+
 /* For the leds-gpio driver */
 struct gpio_led {
 	const char *name;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5b247b8a6b3b..06b80337303b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -60,9 +60,9 @@
 
 /* note: prints function name for you */
 #ifdef ATA_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #ifdef ATA_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #else
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_VERBOSE_DEBUG */
@@ -71,7 +71,7 @@
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_DEBUG */
 
-#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 
 /* NEW: debug levels */
 #define HAVE_LIBATA_MSG 1
@@ -750,6 +750,7 @@ struct ata_port_operations {
 	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
 	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
 	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
+	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
 
 	void (*dev_config)(struct ata_device *dev);
 
@@ -951,6 +952,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
 			  unsigned int ofs, unsigned int len);
 extern void ata_id_c_string(const u16 *id, unsigned char *s,
 			    unsigned int ofs, unsigned int len);
+extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
 extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
diff --git a/include/linux/libps2.h b/include/linux/libps2.h
index f6f301e2b0f5..afc413369101 100644
--- a/include/linux/libps2.h
+++ b/include/linux/libps2.h
@@ -43,7 +43,6 @@ void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
 int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
 void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
 int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
-int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command);
 int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
 int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data);
 void ps2_cmd_aborted(struct ps2dev *ps2dev);
diff --git a/include/linux/list.h b/include/linux/list.h
index 139ec41d9c2e..db35ef02e745 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -61,14 +61,10 @@ extern void __list_add(struct list_head *new,
  * Insert a new entry after the specified head.
  * This is good for implementing stacks.
  */
-#ifndef CONFIG_DEBUG_LIST
 static inline void list_add(struct list_head *new, struct list_head *head)
 {
 	__list_add(new, head, head->next);
 }
-#else
-extern void list_add(struct list_head *new, struct list_head *head);
-#endif
 
 
 /**
@@ -218,22 +214,62 @@ static inline int list_is_singular(const struct list_head *head)
 	return !list_empty(head) && (head->next == head->prev);
 }
 
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
 static inline void __list_splice(const struct list_head *list,
-				 struct list_head *head)
+				 struct list_head *prev,
+				 struct list_head *next)
 {
 	struct list_head *first = list->next;
 	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
 
-	first->prev = head;
-	head->next = first;
+	first->prev = prev;
+	prev->next = first;
 
-	last->next = at;
-	at->prev = last;
+	last->next = next;
+	next->prev = last;
 }
 
 /**
- * list_splice - join two lists
+ * list_splice - join two lists, this is designed for stacks
  * @list: the new list to add.
  * @head: the place to add it in the first list.
  */
@@ -241,7 +277,19 @@ static inline void list_splice(const struct list_head *list,
 				struct list_head *head)
 {
 	if (!list_empty(list))
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head->prev, head);
 }
 
 /**
@@ -255,7 +303,24 @@ static inline void list_splice_init(struct list_head *list,
 				    struct list_head *head)
 {
 	if (!list_empty(list)) {
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head->prev, head);
 		INIT_LIST_HEAD(list);
 	}
 }
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index 102d928f7206..dbb87ab282e8 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -200,10 +200,12 @@ typedef int	  (*nlm_host_match_fn_t)(void *cur, struct nlm_host *ref);
  * Server-side lock handling
  */
 __be32		  nlmsvc_lock(struct svc_rqst *, struct nlm_file *,
-					struct nlm_lock *, int, struct nlm_cookie *);
+			      struct nlm_host *, struct nlm_lock *, int,
+			      struct nlm_cookie *);
 __be32		  nlmsvc_unlock(struct nlm_file *, struct nlm_lock *);
 __be32		  nlmsvc_testlock(struct svc_rqst *, struct nlm_file *,
-			struct nlm_lock *, struct nlm_lock *, struct nlm_cookie *);
+			struct nlm_host *, struct nlm_lock *,
+			struct nlm_lock *, struct nlm_cookie *);
 __be32		  nlmsvc_cancel_blocked(struct nlm_file *, struct nlm_lock *);
 unsigned long	  nlmsvc_retry_blocked(void);
 void		  nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *,
@@ -224,7 +226,7 @@ void		  nlmsvc_invalidate_all(void);
  * Cluster failover support
  */
 int           nlmsvc_unlock_all_by_sb(struct super_block *sb);
-int           nlmsvc_unlock_all_by_ip(__be32 server_addr);
+int           nlmsvc_unlock_all_by_ip(struct sockaddr *server_addr);
 
 static inline struct inode *nlmsvc_file_inode(struct nlm_file *file)
 {
diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h
new file mode 100644
index 000000000000..6b71d2dce508
--- /dev/null
+++ b/include/linux/mISDNdsp.h
@@ -0,0 +1,37 @@
+#ifndef __mISDNdsp_H__
+#define __mISDNdsp_H__
+
+struct mISDN_dsp_element_arg {
+	char	*name;
+	char	*def;
+	char	*desc;
+};
+
+struct mISDN_dsp_element {
+	char	*name;
+	void	*(*new)(const char *arg);
+	void	(*free)(void *p);
+	void	(*process_tx)(void *p, unsigned char *data, int len);
+	void	(*process_rx)(void *p, unsigned char *data, int len);
+	int	num_args;
+	struct mISDN_dsp_element_arg
+		*args;
+};
+
+extern int  mISDN_dsp_element_register(struct mISDN_dsp_element *elem);
+extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
+
+struct dsp_features {
+	int	hfc_id; /* unique id to identify the chip (or -1) */
+	int	hfc_dtmf; /* set if HFCmulti card supports dtmf */
+	int	hfc_loops; /* set if card supports tone loops */
+	int	hfc_echocanhw; /* set if card supports echocancelation*/
+	int	pcm_id; /* unique id to identify the pcm bus (or -1) */
+	int	pcm_slots; /* number of slots on the pcm bus */
+	int	pcm_banks; /* number of IO banks of pcm bus */
+	int	unclocked; /* data is not clocked (has jitter/loss) */
+	int	unordered; /* data is unordered (packets have index) */
+};
+
+#endif
+
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
new file mode 100644
index 000000000000..e794dfb87504
--- /dev/null
+++ b/include/linux/mISDNhw.h
@@ -0,0 +1,193 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ *   Basic declarations for the mISDN HW channels
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef MISDNHW_H
+#define MISDNHW_H
+#include <linux/mISDNif.h>
+#include <linux/timer.h>
+
+/*
+ * HW DEBUG 0xHHHHGGGG
+ * H - hardware driver specific bits
+ * G - for all drivers
+ */
+
+#define DEBUG_HW		0x00000001
+#define DEBUG_HW_OPEN		0x00000002
+#define DEBUG_HW_DCHANNEL	0x00000100
+#define DEBUG_HW_DFIFO		0x00000200
+#define DEBUG_HW_BCHANNEL	0x00001000
+#define DEBUG_HW_BFIFO		0x00002000
+
+#define MAX_DFRAME_LEN_L1	300
+#define MAX_MON_FRAME		32
+#define MAX_LOG_SPACE		2048
+#define MISDN_COPY_SIZE		32
+
+/* channel->Flags bit field */
+#define FLG_TX_BUSY		0	/* tx_buf in use */
+#define FLG_TX_NEXT		1	/* next_skb in use */
+#define FLG_L1_BUSY		2	/* L1 is permanent busy */
+#define FLG_L2_ACTIVATED	3	/* activated from L2 */
+#define FLG_OPEN		5	/* channel is in use */
+#define FLG_ACTIVE		6	/* channel is activated */
+#define FLG_BUSY_TIMER		7
+/* channel type */
+#define FLG_DCHANNEL		8	/* channel is D-channel */
+#define FLG_BCHANNEL		9	/* channel is B-channel */
+#define FLG_ECHANNEL		10	/* channel is E-channel */
+#define FLG_TRANSPARENT		12	/* channel use transparent data */
+#define FLG_HDLC		13	/* channel use hdlc data */
+#define FLG_L2DATA		14	/* channel use L2 DATA primitivs */
+#define FLG_ORIGIN		15	/* channel is on origin site */
+/* channel specific stuff */
+/* arcofi specific */
+#define FLG_ARCOFI_TIMER	16
+#define FLG_ARCOFI_ERROR	17
+/* isar specific */
+#define FLG_INITIALIZED		16
+#define FLG_DLEETX		17
+#define FLG_LASTDLE		18
+#define FLG_FIRST		19
+#define FLG_LASTDATA		20
+#define FLG_NMD_DATA		21
+#define FLG_FTI_RUN		22
+#define FLG_LL_OK		23
+#define FLG_LL_CONN		24
+#define FLG_DTMFSEND		25
+
+/* workq events */
+#define FLG_RECVQUEUE		30
+#define	FLG_PHCHANGE		31
+
+#define schedule_event(s, ev)	do { \
+					test_and_set_bit(ev, &((s)->Flags)); \
+					schedule_work(&((s)->workq)); \
+				} while (0)
+
+struct dchannel {
+	struct mISDNdevice	dev;
+	u_long			Flags;
+	struct work_struct	workq;
+	void			(*phfunc) (struct dchannel *);
+	u_int			state;
+	void			*l1;
+	/* HW access */
+	u_char			(*read_reg) (void *, u_char);
+	void			(*write_reg) (void *, u_char, u_char);
+	void			(*read_fifo) (void *, u_char *, int);
+	void			(*write_fifo) (void *, u_char *, int);
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff_head	squeue;
+	struct sk_buff_head	rqueue;
+	struct sk_buff		*tx_skb;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+typedef int	(dchannel_l1callback)(struct dchannel *, u_int);
+extern int	create_l1(struct dchannel *, dchannel_l1callback *);
+
+/* private L1 commands */
+#define INFO0		0x8002
+#define INFO1		0x8102
+#define INFO2		0x8202
+#define INFO3_P8	0x8302
+#define INFO3_P10	0x8402
+#define INFO4_P8	0x8502
+#define INFO4_P10	0x8602
+#define LOSTFRAMING	0x8702
+#define ANYSIGNAL	0x8802
+#define HW_POWERDOWN	0x8902
+#define HW_RESET_REQ	0x8a02
+#define HW_POWERUP_REQ	0x8b02
+#define HW_DEACT_REQ	0x8c02
+#define HW_ACTIVATE_REQ	0x8e02
+#define HW_D_NOBLOCKED  0x8f02
+#define HW_RESET_IND	0x9002
+#define HW_POWERUP_IND	0x9102
+#define HW_DEACT_IND	0x9202
+#define HW_ACTIVATE_IND	0x9302
+#define HW_DEACT_CNF	0x9402
+#define HW_TESTLOOP	0x9502
+#define HW_TESTRX_RAW	0x9602
+#define HW_TESTRX_HDLC	0x9702
+#define HW_TESTRX_OFF	0x9802
+
+struct layer1;
+extern int	l1_event(struct layer1 *, u_int);
+
+
+struct bchannel {
+	struct mISDNchannel	ch;
+	int			nr;
+	u_long			Flags;
+	struct work_struct	workq;
+	u_int			state;
+	/* HW access */
+	u_char			(*read_reg) (void *, u_char);
+	void			(*write_reg) (void *, u_char, u_char);
+	void			(*read_fifo) (void *, u_char *, int);
+	void			(*write_fifo) (void *, u_char *, int);
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff		*next_skb;
+	struct sk_buff		*tx_skb;
+	struct sk_buff_head	rqueue;
+	int			rcount;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+extern int	mISDN_initdchannel(struct dchannel *, int, void *);
+extern int	mISDN_initbchannel(struct bchannel *, int);
+extern int	mISDN_freedchannel(struct dchannel *);
+extern int	mISDN_freebchannel(struct bchannel *);
+extern void	queue_ch_frame(struct mISDNchannel *, u_int,
+			int, struct sk_buff *);
+extern int	dchannel_senddata(struct dchannel *, struct sk_buff *);
+extern int	bchannel_senddata(struct bchannel *, struct sk_buff *);
+extern void	recv_Dchannel(struct dchannel *);
+extern void	recv_Bchannel(struct bchannel *);
+extern void	recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
+extern void	recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
+extern void	confirm_Bsend(struct bchannel *bch);
+extern int	get_next_bframe(struct bchannel *);
+extern int	get_next_dframe(struct dchannel *);
+
+#endif
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
new file mode 100644
index 000000000000..8f2d60da04e7
--- /dev/null
+++ b/include/linux/mISDNif.h
@@ -0,0 +1,509 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU LESSER GENERAL PUBLIC LICENSE
+ * version 2.1 as published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU LESSER GENERAL PUBLIC LICENSE for more details.
+ *
+ */
+
+#ifndef mISDNIF_H
+#define mISDNIF_H
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/socket.h>
+
+/*
+ * ABI Version 32 bit
+ *
+ * <8 bit> Major version
+ *		- changed if any interface become backwards incompatible
+ *
+ * <8 bit> Minor version
+ *              - changed if any interface is extended but backwards compatible
+ *
+ * <16 bit> Release number
+ *              - should be incremented on every checkin
+ */
+#define	MISDN_MAJOR_VERSION	1
+#define	MISDN_MINOR_VERSION	0
+#define MISDN_RELEASE		19
+
+/* primitives for information exchange
+ * generell format
+ * <16  bit  0 >
+ * <8  bit command>
+ *    BIT 8 = 1 LAYER private
+ *    BIT 7 = 1 answer
+ *    BIT 6 = 1 DATA
+ * <8  bit target layer mask>
+ *
+ * Layer = 00 is reserved for general commands
+   Layer = 01  L2 -> HW
+   Layer = 02  HW -> L2
+   Layer = 04  L3 -> L2
+   Layer = 08  L2 -> L3
+ * Layer = FF is reserved for broadcast commands
+ */
+
+#define MISDN_CMDMASK		0xff00
+#define MISDN_LAYERMASK		0x00ff
+
+/* generell commands */
+#define OPEN_CHANNEL		0x0100
+#define CLOSE_CHANNEL		0x0200
+#define CONTROL_CHANNEL		0x0300
+#define CHECK_DATA		0x0400
+
+/* layer 2 -> layer 1 */
+#define PH_ACTIVATE_REQ		0x0101
+#define PH_DEACTIVATE_REQ	0x0201
+#define PH_DATA_REQ		0x2001
+#define MPH_ACTIVATE_REQ	0x0501
+#define MPH_DEACTIVATE_REQ	0x0601
+#define MPH_INFORMATION_REQ	0x0701
+#define PH_CONTROL_REQ		0x0801
+
+/* layer 1 -> layer 2 */
+#define PH_ACTIVATE_IND		0x0102
+#define PH_ACTIVATE_CNF		0x4102
+#define PH_DEACTIVATE_IND	0x0202
+#define PH_DEACTIVATE_CNF	0x4202
+#define PH_DATA_IND		0x2002
+#define MPH_ACTIVATE_IND	0x0502
+#define MPH_DEACTIVATE_IND	0x0602
+#define MPH_INFORMATION_IND	0x0702
+#define PH_DATA_CNF		0x6002
+#define PH_CONTROL_IND		0x0802
+#define PH_CONTROL_CNF		0x4802
+
+/* layer 3 -> layer 2 */
+#define DL_ESTABLISH_REQ	0x1004
+#define DL_RELEASE_REQ		0x1104
+#define DL_DATA_REQ		0x3004
+#define DL_UNITDATA_REQ		0x3104
+#define DL_INFORMATION_REQ	0x0004
+
+/* layer 2 -> layer 3 */
+#define DL_ESTABLISH_IND	0x1008
+#define DL_ESTABLISH_CNF	0x5008
+#define DL_RELEASE_IND		0x1108
+#define DL_RELEASE_CNF		0x5108
+#define DL_DATA_IND		0x3008
+#define DL_UNITDATA_IND		0x3108
+#define DL_INFORMATION_IND	0x0008
+
+/* intern layer 2 managment */
+#define MDL_ASSIGN_REQ		0x1804
+#define MDL_ASSIGN_IND		0x1904
+#define MDL_REMOVE_REQ		0x1A04
+#define MDL_REMOVE_IND		0x1B04
+#define MDL_STATUS_UP_IND	0x1C04
+#define MDL_STATUS_DOWN_IND	0x1D04
+#define MDL_STATUS_UI_IND	0x1E04
+#define MDL_ERROR_IND		0x1F04
+#define MDL_ERROR_RSP		0x5F04
+
+/* DL_INFORMATION_IND types */
+#define DL_INFO_L2_CONNECT	0x0001
+#define DL_INFO_L2_REMOVED	0x0002
+
+/* PH_CONTROL types */
+/* TOUCH TONE IS 0x20XX  XX "0"..."9", "A","B","C","D","*","#" */
+#define DTMF_TONE_VAL		0x2000
+#define DTMF_TONE_MASK		0x007F
+#define DTMF_TONE_START		0x2100
+#define DTMF_TONE_STOP		0x2200
+#define DTMF_HFC_COEF		0x4000
+#define DSP_CONF_JOIN		0x2403
+#define DSP_CONF_SPLIT		0x2404
+#define DSP_RECEIVE_OFF		0x2405
+#define DSP_RECEIVE_ON		0x2406
+#define DSP_ECHO_ON		0x2407
+#define DSP_ECHO_OFF		0x2408
+#define DSP_MIX_ON		0x2409
+#define DSP_MIX_OFF		0x240a
+#define DSP_DELAY		0x240b
+#define DSP_JITTER		0x240c
+#define DSP_TXDATA_ON		0x240d
+#define DSP_TXDATA_OFF		0x240e
+#define DSP_TX_DEJITTER		0x240f
+#define DSP_TX_DEJ_OFF		0x2410
+#define DSP_TONE_PATT_ON	0x2411
+#define DSP_TONE_PATT_OFF	0x2412
+#define DSP_VOL_CHANGE_TX	0x2413
+#define DSP_VOL_CHANGE_RX	0x2414
+#define DSP_BF_ENABLE_KEY	0x2415
+#define DSP_BF_DISABLE		0x2416
+#define DSP_BF_ACCEPT		0x2416
+#define DSP_BF_REJECT		0x2417
+#define DSP_PIPELINE_CFG	0x2418
+#define HFC_VOL_CHANGE_TX	0x2601
+#define HFC_VOL_CHANGE_RX	0x2602
+#define HFC_SPL_LOOP_ON		0x2603
+#define HFC_SPL_LOOP_OFF	0x2604
+
+/* DSP_TONE_PATT_ON parameter */
+#define TONE_OFF			0x0000
+#define TONE_GERMAN_DIALTONE		0x0001
+#define TONE_GERMAN_OLDDIALTONE		0x0002
+#define TONE_AMERICAN_DIALTONE		0x0003
+#define TONE_GERMAN_DIALPBX		0x0004
+#define TONE_GERMAN_OLDDIALPBX		0x0005
+#define TONE_AMERICAN_DIALPBX		0x0006
+#define TONE_GERMAN_RINGING		0x0007
+#define TONE_GERMAN_OLDRINGING		0x0008
+#define TONE_AMERICAN_RINGPBX		0x000b
+#define TONE_GERMAN_RINGPBX		0x000c
+#define TONE_GERMAN_OLDRINGPBX		0x000d
+#define TONE_AMERICAN_RINGING		0x000e
+#define TONE_GERMAN_BUSY		0x000f
+#define TONE_GERMAN_OLDBUSY		0x0010
+#define TONE_AMERICAN_BUSY		0x0011
+#define TONE_GERMAN_HANGUP		0x0012
+#define TONE_GERMAN_OLDHANGUP		0x0013
+#define TONE_AMERICAN_HANGUP		0x0014
+#define TONE_SPECIAL_INFO		0x0015
+#define TONE_GERMAN_GASSENBESETZT	0x0016
+#define TONE_GERMAN_AUFSCHALTTON	0x0016
+
+/* MPH_INFORMATION_IND */
+#define L1_SIGNAL_LOS_OFF	0x0010
+#define L1_SIGNAL_LOS_ON	0x0011
+#define L1_SIGNAL_AIS_OFF	0x0012
+#define L1_SIGNAL_AIS_ON	0x0013
+#define L1_SIGNAL_RDI_OFF	0x0014
+#define L1_SIGNAL_RDI_ON	0x0015
+#define L1_SIGNAL_SLIP_RX	0x0020
+#define L1_SIGNAL_SLIP_TX	0x0021
+
+/*
+ * protocol ids
+ * D channel 1-31
+ * B channel 33 - 63
+ */
+
+#define ISDN_P_NONE		0
+#define ISDN_P_BASE		0
+#define ISDN_P_TE_S0		0x01
+#define ISDN_P_NT_S0  		0x02
+#define ISDN_P_TE_E1		0x03
+#define ISDN_P_NT_E1  		0x04
+#define ISDN_P_LAPD_TE		0x10
+#define	ISDN_P_LAPD_NT		0x11
+
+#define ISDN_P_B_MASK		0x1f
+#define ISDN_P_B_START		0x20
+
+#define ISDN_P_B_RAW		0x21
+#define ISDN_P_B_HDLC		0x22
+#define ISDN_P_B_X75SLP		0x23
+#define ISDN_P_B_L2DTMF		0x24
+#define ISDN_P_B_L2DSP		0x25
+#define ISDN_P_B_L2DSPHDLC	0x26
+
+#define OPTION_L2_PMX		1
+#define OPTION_L2_PTP		2
+#define OPTION_L2_FIXEDTEI	3
+#define OPTION_L2_CLEANUP	4
+
+/* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
+#define MISDN_MAX_IDLEN		20
+
+struct mISDNhead {
+	unsigned int	prim;
+	unsigned int	id;
+}  __attribute__((packed));
+
+#define MISDN_HEADER_LEN	sizeof(struct mISDNhead)
+#define MAX_DATA_SIZE		2048
+#define MAX_DATA_MEM		(MAX_DATA_SIZE + MISDN_HEADER_LEN)
+#define MAX_DFRAME_LEN		260
+
+#define MISDN_ID_ADDR_MASK	0xFFFF
+#define MISDN_ID_TEI_MASK	0xFF00
+#define MISDN_ID_SAPI_MASK	0x00FF
+#define MISDN_ID_TEI_ANY	0x7F00
+
+#define MISDN_ID_ANY		0xFFFF
+#define MISDN_ID_NONE		0xFFFE
+
+#define GROUP_TEI		127
+#define TEI_SAPI		63
+#define CTRL_SAPI		0
+
+#define MISDN_MAX_CHANNEL	127
+#define MISDN_CHMAP_SIZE	((MISDN_MAX_CHANNEL + 1) >> 3)
+
+#define SOL_MISDN	0
+
+struct sockaddr_mISDN {
+	sa_family_t    family;
+	unsigned char	dev;
+	unsigned char	channel;
+	unsigned char	sapi;
+	unsigned char	tei;
+};
+
+/* timer device ioctl */
+#define IMADDTIMER	_IOR('I', 64, int)
+#define IMDELTIMER	_IOR('I', 65, int)
+/* socket ioctls */
+#define	IMGETVERSION	_IOR('I', 66, int)
+#define	IMGETCOUNT	_IOR('I', 67, int)
+#define IMGETDEVINFO	_IOR('I', 68, int)
+#define IMCTRLREQ	_IOR('I', 69, int)
+#define IMCLEAR_L2	_IOR('I', 70, int)
+
+struct mISDNversion {
+	unsigned char	major;
+	unsigned char	minor;
+	unsigned short	release;
+};
+
+struct mISDN_devinfo {
+	u_int			id;
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			protocol;
+	u_char			channelmap[MISDN_CHMAP_SIZE];
+	u_int			nrbchan;
+	char			name[MISDN_MAX_IDLEN];
+};
+
+static inline int
+test_channelmap(u_int nr, u_char *map)
+{
+	if (nr <= MISDN_MAX_CHANNEL)
+		return map[nr >> 3] & (1 << (nr & 7));
+	else
+		return 0;
+}
+
+static inline void
+set_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] |= (1 << (nr & 7));
+}
+
+static inline void
+clear_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] &= ~(1 << (nr & 7));
+}
+
+/* CONTROL_CHANNEL parameters */
+#define MISDN_CTRL_GETOP		0x0000
+#define MISDN_CTRL_LOOP			0x0001
+#define MISDN_CTRL_CONNECT		0x0002
+#define MISDN_CTRL_DISCONNECT		0x0004
+#define MISDN_CTRL_PCMCONNECT		0x0010
+#define MISDN_CTRL_PCMDISCONNECT	0x0020
+#define MISDN_CTRL_SETPEER		0x0040
+#define MISDN_CTRL_UNSETPEER		0x0080
+#define MISDN_CTRL_RX_OFF		0x0100
+#define MISDN_CTRL_HW_FEATURES_OP	0x2000
+#define MISDN_CTRL_HW_FEATURES		0x2001
+#define MISDN_CTRL_HFC_OP		0x4000
+#define MISDN_CTRL_HFC_PCM_CONN		0x4001
+#define MISDN_CTRL_HFC_PCM_DISC		0x4002
+#define MISDN_CTRL_HFC_CONF_JOIN	0x4003
+#define MISDN_CTRL_HFC_CONF_SPLIT	0x4004
+#define MISDN_CTRL_HFC_RECEIVE_OFF	0x4005
+#define MISDN_CTRL_HFC_RECEIVE_ON	0x4006
+#define MISDN_CTRL_HFC_ECHOCAN_ON 	0x4007
+#define MISDN_CTRL_HFC_ECHOCAN_OFF 	0x4008
+
+
+/* socket options */
+#define MISDN_TIME_STAMP		0x0001
+
+struct mISDN_ctrl_req {
+	int		op;
+	int		channel;
+	int		p1;
+	int		p2;
+};
+
+/* muxer options */
+#define MISDN_OPT_ALL		1
+#define MISDN_OPT_TEIMGR	2
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/net.h>
+#include <net/sock.h>
+#include <linux/completion.h>
+
+#define DEBUG_CORE		0x000000ff
+#define DEBUG_CORE_FUNC		0x00000002
+#define DEBUG_SOCKET		0x00000004
+#define DEBUG_MANAGER		0x00000008
+#define DEBUG_SEND_ERR		0x00000010
+#define DEBUG_MSG_THREAD	0x00000020
+#define DEBUG_QUEUE_FUNC	0x00000040
+#define DEBUG_L1		0x0000ff00
+#define DEBUG_L1_FSM		0x00000200
+#define DEBUG_L2		0x00ff0000
+#define DEBUG_L2_FSM		0x00020000
+#define DEBUG_L2_CTRL		0x00040000
+#define DEBUG_L2_RECV		0x00080000
+#define DEBUG_L2_TEI		0x00100000
+#define DEBUG_L2_TEIFSM		0x00200000
+#define DEBUG_TIMER		0x01000000
+
+#define mISDN_HEAD_P(s)		((struct mISDNhead *)&s->cb[0])
+#define mISDN_HEAD_PRIM(s)	(((struct mISDNhead *)&s->cb[0])->prim)
+#define mISDN_HEAD_ID(s)	(((struct mISDNhead *)&s->cb[0])->id)
+
+/* socket states */
+#define MISDN_OPEN	1
+#define MISDN_BOUND	2
+#define MISDN_CLOSED	3
+
+struct mISDNchannel;
+struct mISDNdevice;
+struct mISDNstack;
+
+struct channel_req {
+	u_int			protocol;
+	struct sockaddr_mISDN	adr;
+	struct mISDNchannel	*ch;
+};
+
+typedef	int	(ctrl_func_t)(struct mISDNchannel *, u_int, void *);
+typedef	int	(send_func_t)(struct mISDNchannel *, struct sk_buff *);
+typedef int	(create_func_t)(struct channel_req *);
+
+struct Bprotocol {
+	struct list_head	list;
+	char			*name;
+	u_int			Bprotocols;
+	create_func_t		*create;
+};
+
+struct mISDNchannel {
+	struct list_head	list;
+	u_int			protocol;
+	u_int			nr;
+	u_long			opt;
+	u_int			addr;
+	struct mISDNstack	*st;
+	struct mISDNchannel	*peer;
+	send_func_t		*send;
+	send_func_t		*recv;
+	ctrl_func_t		*ctrl;
+};
+
+struct mISDN_sock_list {
+	struct hlist_head	head;
+	rwlock_t		lock;
+};
+
+struct mISDN_sock {
+	struct sock		sk;
+	struct mISDNchannel	ch;
+	u_int			cmask;
+	struct mISDNdevice	*dev;
+};
+
+
+
+struct mISDNdevice {
+	struct mISDNchannel	D;
+	u_int			id;
+	char			name[MISDN_MAX_IDLEN];
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			nrbchan;
+	u_char			channelmap[MISDN_CHMAP_SIZE];
+	struct list_head	bchannels;
+	struct mISDNchannel	*teimgr;
+	struct device		dev;
+};
+
+struct mISDNstack {
+	u_long			status;
+	struct mISDNdevice	*dev;
+	struct task_struct	*thread;
+	struct completion	*notify;
+	wait_queue_head_t	workq;
+	struct sk_buff_head	msgq;
+	struct list_head	layer2;
+	struct mISDNchannel	*layer1;
+	struct mISDNchannel	own;
+	struct mutex		lmutex; /* protect lists */
+	struct mISDN_sock_list	l1sock;
+#ifdef MISDN_MSG_STATS
+	u_int			msg_cnt;
+	u_int			sleep_cnt;
+	u_int			stopped_cnt;
+#endif
+};
+
+/* global alloc/queue functions */
+
+static inline struct sk_buff *
+mI_alloc_skb(unsigned int len, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb;
+
+	skb = alloc_skb(len + MISDN_HEADER_LEN, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, MISDN_HEADER_LEN);
+	return skb;
+}
+
+static inline struct sk_buff *
+_alloc_mISDN_skb(u_int prim, u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb = mI_alloc_skb(len, gfp_mask);
+	struct mISDNhead *hh;
+
+	if (!skb)
+		return NULL;
+	if (len)
+		memcpy(skb_put(skb, len), dp, len);
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = id;
+	return skb;
+}
+
+static inline void
+_queue_data(struct mISDNchannel *ch, u_int prim,
+    u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff		*skb;
+
+	if (!ch->peer)
+		return;
+	skb = _alloc_mISDN_skb(prim, id, len, dp, gfp_mask);
+	if (!skb)
+		return;
+	if (ch->recv(ch->peer, skb))
+		dev_kfree_skb(skb);
+}
+
+/* global register/unregister functions */
+
+extern int	mISDN_register_device(struct mISDNdevice *, char *name);
+extern void	mISDN_unregister_device(struct mISDNdevice *);
+extern int	mISDN_register_Bprotocol(struct Bprotocol *);
+extern void	mISDN_unregister_Bprotocol(struct Bprotocol *);
+
+extern void	set_channel_address(struct mISDNchannel *, u_int, u_int);
+
+#endif /* __KERNEL__ */
+#endif /* mISDNIF_H */
diff --git a/include/linux/major.h b/include/linux/major.h
index 0cb98053537a..53d5fafd85c3 100644
--- a/include/linux/major.h
+++ b/include/linux/major.h
@@ -53,7 +53,7 @@
 #define STL_SIOMEMMAJOR		28
 #define ACSI_MAJOR		28
 #define AZTECH_CDROM_MAJOR	29
-#define GRAPHDEV_MAJOR		29   /* SparcLinux & Linux/68k /dev/fb */
+#define FB_MAJOR		29   /* /dev/fb* framebuffers */
 #define CM206_CDROM_MAJOR	32
 #define IDE2_MAJOR		33
 #define IDE3_MAJOR		34
diff --git a/include/linux/maple.h b/include/linux/maple.h
index d31e36ebb436..c23d3f51ba40 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -2,6 +2,7 @@
 #define __LINUX_MAPLE_H
 
 #include <linux/device.h>
+#include <mach/maple.h>
 
 extern struct bus_type maple_bus_type;
 
@@ -33,6 +34,7 @@ struct mapleq {
 	void *sendbuf, *recvbuf, *recvbufdcsp;
 	unsigned char length;
 	enum maple_code command;
+	struct mutex mutex;
 };
 
 struct maple_devinfo {
@@ -49,7 +51,6 @@ struct maple_devinfo {
 struct maple_device {
 	struct maple_driver *driver;
 	struct mapleq *mq;
-	void *private_data;
 	void (*callback) (struct mapleq * mq);
 	unsigned long when, interval, function;
 	struct maple_devinfo devinfo;
@@ -61,8 +62,6 @@ struct maple_device {
 
 struct maple_driver {
 	unsigned long function;
-	int (*connect) (struct maple_device * dev);
-	void (*disconnect) (struct maple_device * dev);
 	struct device_driver drv;
 };
 
@@ -70,10 +69,17 @@ void maple_getcond_callback(struct maple_device *dev,
 			    void (*callback) (struct mapleq * mq),
 			    unsigned long interval,
 			    unsigned long function);
-int maple_driver_register(struct device_driver *drv);
-void maple_add_packet(struct mapleq *mq);
+int maple_driver_register(struct maple_driver *);
+void maple_driver_unregister(struct maple_driver *);
+
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+	u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
 
 #define to_maple_dev(n) container_of(n, struct maple_device, dev)
 #define to_maple_driver(n) container_of(n, struct maple_driver, drv)
 
+#define maple_get_drvdata(d)		dev_get_drvdata(&(d)->dev)
+#define maple_set_drvdata(d,p)		dev_set_drvdata(&(d)->dev, (p))
+
 #endif				/* __LINUX_MAPLE_H */
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index e6608776bc96..fdf3967e1397 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -35,7 +35,10 @@ extern int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
 extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
 					gfp_t gfp_mask);
 extern void mem_cgroup_uncharge_page(struct page *page);
+extern void mem_cgroup_uncharge_cache_page(struct page *page);
 extern void mem_cgroup_move_lists(struct page *page, bool active);
+extern int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask);
+
 extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
 					struct list_head *dst,
 					unsigned long *scanned, int order,
@@ -50,9 +53,9 @@ extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
 #define mm_match_cgroup(mm, cgroup)	\
 	((cgroup) == mem_cgroup_from_task((mm)->owner))
 
-extern int mem_cgroup_prepare_migration(struct page *page);
+extern int
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage);
 extern void mem_cgroup_end_migration(struct page *page);
-extern void mem_cgroup_page_migration(struct page *page, struct page *newpage);
 
 /*
  * For memory reclaim.
@@ -97,6 +100,15 @@ static inline void mem_cgroup_uncharge_page(struct page *page)
 {
 }
 
+static inline void mem_cgroup_uncharge_cache_page(struct page *page)
+{
+}
+
+static inline int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask)
+{
+	return 0;
+}
+
 static inline void mem_cgroup_move_lists(struct page *page, bool active)
 {
 }
@@ -112,7 +124,8 @@ static inline int task_in_mem_cgroup(struct task_struct *task,
 	return 1;
 }
 
-static inline int mem_cgroup_prepare_migration(struct page *page)
+static inline int
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage)
 {
 	return 0;
 }
@@ -121,11 +134,6 @@ static inline void mem_cgroup_end_migration(struct page *page)
 {
 }
 
-static inline void
-mem_cgroup_page_migration(struct page *page, struct page *newpage)
-{
-}
-
 static inline int mem_cgroup_calc_mapped_ratio(struct mem_cgroup *mem)
 {
 	return 0;
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index ea9f5ad9ec8e..763ba81fc0f0 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -13,12 +13,12 @@ struct mem_section;
 #ifdef CONFIG_MEMORY_HOTPLUG
 
 /*
- * Magic number for free bootmem.
+ * Types for free bootmem.
  * The normal smallest mapcount is -1. Here is smaller value than it.
  */
-#define SECTION_INFO		0xfffffffe
-#define MIX_INFO		0xfffffffd
-#define NODE_INFO		0xfffffffc
+#define SECTION_INFO		(-1 - 1)
+#define MIX_SECTION_INFO	(-1 - 2)
+#define NODE_INFO		(-1 - 3)
 
 /*
  * pgdat resizing functions
@@ -199,6 +199,18 @@ extern int walk_memory_resource(unsigned long start_pfn,
 			unsigned long nr_pages, void *arg,
 			int (*func)(unsigned long, unsigned long, void *));
 
+#ifdef CONFIG_MEMORY_HOTREMOVE
+
+extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages);
+
+#else
+static inline int is_mem_section_removable(unsigned long pfn,
+					unsigned long nr_pages)
+{
+	return 0;
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
+
 extern int add_memory(int nid, u64 start, u64 size);
 extern int arch_add_memory(int nid, u64 start, u64 size);
 extern int remove_memory(u64 start, u64 size);
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 3a39570b81b8..085c903fe0f1 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -59,6 +59,7 @@ enum {
 #include <linux/rbtree.h>
 #include <linux/spinlock.h>
 #include <linux/nodemask.h>
+#include <linux/pagemap.h>
 
 struct mm_struct;
 
@@ -220,6 +221,24 @@ extern int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context);
 extern int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
 			int no_context);
 #endif
+
+/* Check if a vma is migratable */
+static inline int vma_migratable(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
+		return 0;
+	/*
+	 * Migration allocates pages in the highest zone. If we cannot
+	 * do so then migration (at least from node to node) is not
+	 * possible.
+	 */
+	if (vma->vm_file &&
+		gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping))
+								< policy_zone)
+			return 0;
+	return 1;
+}
+
 #else
 
 struct mempolicy {};
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index 37a5cdb03918..a9f998a3f48b 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -263,6 +263,10 @@ struct memstick_dev {
 	/* Get next request from the media driver.                         */
 	int                      (*next_request)(struct memstick_dev *card,
 						 struct memstick_request **mrq);
+	/* Tell the media driver to stop doing things                      */
+	void                     (*stop)(struct memstick_dev *card);
+	/* Allow the media driver to continue                              */
+	void                     (*start)(struct memstick_dev *card);
 
 	struct device            dev;
 };
@@ -284,7 +288,7 @@ struct memstick_host {
 	/* Notify the host that some requests are pending. */
 	void                (*request)(struct memstick_host *host);
 	/* Set host IO parameters (power, clock, etc).     */
-	void                (*set_param)(struct memstick_host *host,
+	int                 (*set_param)(struct memstick_host *host,
 					 enum memstick_param param,
 					 int value);
 	unsigned long       private[0] ____cacheline_aligned;
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
index 4ab2162db13b..322cd6deb9f0 100644
--- a/include/linux/mfd/asic3.h
+++ b/include/linux/mfd/asic3.h
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  *
  * Copyright 2001 Compaq Computer Corporation.
- * Copyright 2007 OpendHand.
+ * Copyright 2007-2008 OpenedHand Ltd.
  */
 
 #ifndef __ASIC3_H__
@@ -16,43 +16,22 @@
 
 #include <linux/types.h>
 
-struct asic3 {
-	void __iomem *mapping;
-	unsigned int bus_shift;
-	unsigned int irq_nr;
-	unsigned int irq_base;
-	spinlock_t lock;
-	u16 irq_bothedge[4];
-	struct device *dev;
-};
-
 struct asic3_platform_data {
-	struct {
-		u32 dir;
-		u32 init;
-		u32 sleep_mask;
-		u32 sleep_out;
-		u32 batt_fault_out;
-		u32 sleep_conf;
-		u32 alt_function;
-	} gpio_a, gpio_b, gpio_c, gpio_d;
-
-	unsigned int bus_shift;
+	u16 *gpio_config;
+	unsigned int gpio_config_num;
 
 	unsigned int irq_base;
 
-	struct platform_device **children;
-	unsigned int n_children;
+	unsigned int gpio_base;
 };
 
-int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio);
-void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
-
 #define ASIC3_NUM_GPIO_BANKS	4
 #define ASIC3_GPIOS_PER_BANK	16
 #define ASIC3_NUM_GPIOS		64
 #define ASIC3_NR_IRQS		ASIC3_NUM_GPIOS + 6
 
+#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio))
+
 #define ASIC3_GPIO_BANK_A	0
 #define ASIC3_GPIO_BANK_B	1
 #define ASIC3_GPIO_BANK_C	2
@@ -64,32 +43,89 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
 /* All offsets below are specified with this address bus shift */
 #define ASIC3_DEFAULT_ADDR_SHIFT 2
 
-#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_Base + ASIC3_##base##_##reg)
+#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg)
 #define ASIC3_GPIO_OFFSET(base, reg) \
-	(ASIC3_GPIO_##base##_Base + ASIC3_GPIO_##reg)
-
-#define ASIC3_GPIO_A_Base      0x0000
-#define ASIC3_GPIO_B_Base      0x0100
-#define ASIC3_GPIO_C_Base      0x0200
-#define ASIC3_GPIO_D_Base      0x0300
-
-#define ASIC3_GPIO_Mask          0x00    /* R/W 0:don't mask */
-#define ASIC3_GPIO_Direction     0x04    /* R/W 0:input */
-#define ASIC3_GPIO_Out           0x08    /* R/W 0:output low */
-#define ASIC3_GPIO_TriggerType   0x0c    /* R/W 0:level */
-#define ASIC3_GPIO_EdgeTrigger   0x10    /* R/W 0:falling */
-#define ASIC3_GPIO_LevelTrigger  0x14    /* R/W 0:low level detect */
-#define ASIC3_GPIO_SleepMask     0x18    /* R/W 0:don't mask in sleep mode */
-#define ASIC3_GPIO_SleepOut      0x1c    /* R/W level 0:low in sleep mode */
-#define ASIC3_GPIO_BattFaultOut  0x20    /* R/W level 0:low in batt_fault */
-#define ASIC3_GPIO_IntStatus     0x24    /* R/W 0:none, 1:detect */
-#define ASIC3_GPIO_AltFunction   0x28	 /* R/W 1:LED register control */
-#define ASIC3_GPIO_SleepConf     0x2c    /*
+	(ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg)
+
+#define ASIC3_GPIO_A_BASE      0x0000
+#define ASIC3_GPIO_B_BASE      0x0100
+#define ASIC3_GPIO_C_BASE      0x0200
+#define ASIC3_GPIO_D_BASE      0x0300
+
+#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4)
+#define ASIC3_GPIO_TO_BIT(gpio)  ((gpio) - \
+				  (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4)))
+#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio))
+#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100))
+#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100))
+
+#define ASIC3_GPIO_MASK          0x00    /* R/W 0:don't mask */
+#define ASIC3_GPIO_DIRECTION     0x04    /* R/W 0:input */
+#define ASIC3_GPIO_OUT           0x08    /* R/W 0:output low */
+#define ASIC3_GPIO_TRIGGER_TYPE  0x0c    /* R/W 0:level */
+#define ASIC3_GPIO_EDGE_TRIGGER  0x10    /* R/W 0:falling */
+#define ASIC3_GPIO_LEVEL_TRIGGER 0x14    /* R/W 0:low level detect */
+#define ASIC3_GPIO_SLEEP_MASK    0x18    /* R/W 0:don't mask in sleep mode */
+#define ASIC3_GPIO_SLEEP_OUT     0x1c    /* R/W level 0:low in sleep mode */
+#define ASIC3_GPIO_BAT_FAULT_OUT 0x20    /* R/W level 0:low in batt_fault */
+#define ASIC3_GPIO_INT_STATUS    0x24    /* R/W 0:none, 1:detect */
+#define ASIC3_GPIO_ALT_FUNCTION  0x28	 /* R/W 1:LED register control */
+#define ASIC3_GPIO_SLEEP_CONF    0x2c    /*
 					  * R/W bit 1: autosleep
 					  * 0: disable gposlpout in normal mode,
 					  * enable gposlpout in sleep mode.
 					  */
-#define ASIC3_GPIO_Status        0x30    /* R   Pin status */
+#define ASIC3_GPIO_STATUS        0x30    /* R   Pin status */
+
+/*
+ * ASIC3 GPIO config
+ *
+ * Bits 0..6   gpio number
+ * Bits 7..13  Alternate function
+ * Bit  14     Direction
+ * Bit  15     Initial value
+ *
+ */
+#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f)
+#define ASIC3_CONFIG_GPIO_ALT(config)  (((config) & (0x7f << 7)) >> 7)
+#define ASIC3_CONFIG_GPIO_DIR(config)  ((config & (1 << 14)) >> 14)
+#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15)
+#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \
+	| (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \
+	| (((init) & 0x1) << 15))
+#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \
+	ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init))
+#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \
+	ASIC3_CONFIG_GPIO((gpio), 0, 1, (init))
+
+/*
+ * Alternate functions
+ */
+#define ASIC3_GPIOA11_PWM0		ASIC3_CONFIG_GPIO(11, 1, 1, 0)
+#define ASIC3_GPIOA12_PWM1		ASIC3_CONFIG_GPIO(12, 1, 1, 0)
+#define ASIC3_GPIOA15_CONTROL_CX	ASIC3_CONFIG_GPIO(15, 1, 1, 0)
+#define ASIC3_GPIOC0_LED0		ASIC3_CONFIG_GPIO(32, 1, 1, 0)
+#define ASIC3_GPIOC1_LED1		ASIC3_CONFIG_GPIO(33, 1, 1, 0)
+#define ASIC3_GPIOC2_LED2		ASIC3_CONFIG_GPIO(34, 1, 1, 0)
+#define ASIC3_GPIOC3_SPI_RXD		ASIC3_CONFIG_GPIO(35, 1, 0, 0)
+#define ASIC3_GPIOC4_CF_nCD		ASIC3_CONFIG_GPIO(36, 1, 0, 0)
+#define ASIC3_GPIOC4_SPI_TXD		ASIC3_CONFIG_GPIO(36, 1, 1, 0)
+#define ASIC3_GPIOC5_SPI_CLK		ASIC3_CONFIG_GPIO(37, 1, 1, 0)
+#define ASIC3_GPIOC5_nCIOW		ASIC3_CONFIG_GPIO(37, 1, 1, 0)
+#define ASIC3_GPIOC6_nCIOR		ASIC3_CONFIG_GPIO(38, 1, 1, 0)
+#define ASIC3_GPIOC7_nPCE_1		ASIC3_CONFIG_GPIO(39, 1, 0, 0)
+#define ASIC3_GPIOC8_nPCE_2		ASIC3_CONFIG_GPIO(40, 1, 0, 0)
+#define ASIC3_GPIOC9_nPOE		ASIC3_CONFIG_GPIO(41, 1, 0, 0)
+#define ASIC3_GPIOC10_nPWE		ASIC3_CONFIG_GPIO(42, 1, 0, 0)
+#define ASIC3_GPIOC11_PSKTSEL		ASIC3_CONFIG_GPIO(43, 1, 0, 0)
+#define ASIC3_GPIOC12_nPREG		ASIC3_CONFIG_GPIO(44, 1, 0, 0)
+#define ASIC3_GPIOC13_nPWAIT		ASIC3_CONFIG_GPIO(45, 1, 1, 0)
+#define ASIC3_GPIOC14_nPIOIS16		ASIC3_CONFIG_GPIO(46, 1, 1, 0)
+#define ASIC3_GPIOC15_nPIOR		ASIC3_CONFIG_GPIO(47, 1, 0, 0)
+#define ASIC3_GPIOD11_nCIOIS16		ASIC3_CONFIG_GPIO(59, 1, 0, 0)
+#define ASIC3_GPIOD12_nCWAIT		ASIC3_CONFIG_GPIO(60, 1, 0, 0)
+#define ASIC3_GPIOD15_nPIOW		ASIC3_CONFIG_GPIO(63, 1, 0, 0)
+
 
 #define ASIC3_SPI_Base		      0x0400
 #define ASIC3_SPI_Control               0x0000
@@ -128,7 +164,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
 #define LED_AUTOSTOP	(1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
 #define LED_ALWAYS	(1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
 
-#define ASIC3_CLOCK_Base		0x0A00
+#define ASIC3_CLOCK_BASE	   0x0A00
 #define ASIC3_CLOCK_CDEX           0x00
 #define ASIC3_CLOCK_SEL            0x04
 
@@ -159,12 +195,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
 #define CLOCK_SEL_CX            (1 << 2)
 
 
-#define ASIC3_INTR_Base		0x0B00
+#define ASIC3_INTR_BASE		0x0B00
 
-#define ASIC3_INTR_IntMask       0x00  /* Interrupt mask control */
-#define ASIC3_INTR_PIntStat      0x04  /* Peripheral interrupt status */
-#define ASIC3_INTR_IntCPS        0x08  /* Interrupt timer clock pre-scale */
-#define ASIC3_INTR_IntTBS        0x0c  /* Interrupt timer set */
+#define ASIC3_INTR_INT_MASK       0x00  /* Interrupt mask control */
+#define ASIC3_INTR_P_INT_STAT     0x04  /* Peripheral interrupt status */
+#define ASIC3_INTR_INT_CPS        0x08  /* Interrupt timer clock pre-scale */
+#define ASIC3_INTR_INT_TBS        0x0c  /* Interrupt timer set */
 
 #define ASIC3_INTMASK_GINTMASK    (1 << 0)  /* Global INTs mask 1:enable */
 #define ASIC3_INTMASK_GINTEL      (1 << 1)  /* 1: rising edge, 0: hi level */
@@ -227,44 +263,12 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
 #define ASIC3_EXTCF_CF_SLEEP             (1 << 15) /* CF sleep mode control */
 
 /*********************************************
- *  The Onewire interface registers
- *
- *  OWM_CMD
- *  OWM_DAT
- *  OWM_INTR
- *  OWM_INTEN
- *  OWM_CLKDIV
+ *  The Onewire interface (DS1WM) is handled
+ *  by the ds1wm driver.
  *
  *********************************************/
 
-#define ASIC3_OWM_Base		0xC00
-
-#define ASIC3_OWM_CMD         0x00
-#define ASIC3_OWM_DAT         0x04
-#define ASIC3_OWM_INTR        0x08
-#define ASIC3_OWM_INTEN       0x0C
-#define ASIC3_OWM_CLKDIV      0x10
-
-#define ASIC3_OWM_CMD_ONEWR         (1 << 0)
-#define ASIC3_OWM_CMD_SRA           (1 << 1)
-#define ASIC3_OWM_CMD_DQO           (1 << 2)
-#define ASIC3_OWM_CMD_DQI           (1 << 3)
-
-#define ASIC3_OWM_INTR_PD          (1 << 0)
-#define ASIC3_OWM_INTR_PDR         (1 << 1)
-#define ASIC3_OWM_INTR_TBE         (1 << 2)
-#define ASIC3_OWM_INTR_TEMP        (1 << 3)
-#define ASIC3_OWM_INTR_RBF         (1 << 4)
-
-#define ASIC3_OWM_INTEN_EPD        (1 << 0)
-#define ASIC3_OWM_INTEN_IAS        (1 << 1)
-#define ASIC3_OWM_INTEN_ETBE       (1 << 2)
-#define ASIC3_OWM_INTEN_ETMT       (1 << 3)
-#define ASIC3_OWM_INTEN_ERBF       (1 << 4)
-
-#define ASIC3_OWM_CLKDIV_PRE       (3 << 0) /* two bits wide at bit 0 */
-#define ASIC3_OWM_CLKDIV_DIV       (7 << 2) /* 3 bits wide at bit 2 */
-
+#define ASIC3_OWM_BASE		0xC00
 
 /*****************************************************************************
  *  The SD configuration registers are at a completely different location
@@ -492,6 +496,7 @@ void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
 #define ASIC3_SDIO_CTRL_LEDCtrl              0x7C
 #define ASIC3_SDIO_CTRL_SoftwareReset        0x1C0
 
-#define ASIC3_MAP_SIZE	     		     0x2000
+#define ASIC3_MAP_SIZE_32BIT	0x2000
+#define ASIC3_MAP_SIZE_16BIT	0x1000
 
 #endif /* __ASIC3_H__ */
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
new file mode 100644
index 000000000000..49ef857cdb2d
--- /dev/null
+++ b/include/linux/mfd/core.h
@@ -0,0 +1,55 @@
+/*
+ * drivers/mfd/mfd-core.h
+ *
+ * core MFD support
+ * Copyright (c) 2006 Ian Molton
+ * Copyright (c) 2007 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef MFD_CORE_H
+#define MFD_CORE_H
+
+#include <linux/platform_device.h>
+
+/*
+ * This struct describes the MFD part ("cell").
+ * After registration the copy of this structure will become the platform data
+ * of the resulting platform_device
+ */
+struct mfd_cell {
+	const char		*name;
+
+	int			(*enable)(struct platform_device *dev);
+	int			(*disable)(struct platform_device *dev);
+	int			(*suspend)(struct platform_device *dev);
+	int			(*resume)(struct platform_device *dev);
+
+	/* driver-specific data for MFD-aware "cell" drivers */
+	void			*driver_data;
+
+	/* platform_data can be used to either pass data to "generic"
+	   driver or as a hook to mfd_cell for the "cell" drivers */
+	void			*platform_data;
+	size_t			data_size;
+
+	/*
+	 * This resources can be specified relatievly to the parent device.
+	 * For accessing device you should use resources from device
+	 */
+	int			num_resources;
+	const struct resource	*resources;
+};
+
+extern int mfd_add_devices(struct device *parent, int id,
+			   const struct mfd_cell *cells, int n_devs,
+			   struct resource *mem_base,
+			   int irq_base);
+
+extern void mfd_remove_devices(struct device *parent);
+
+#endif
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
new file mode 100644
index 000000000000..7cc824a58f7c
--- /dev/null
+++ b/include/linux/mfd/tc6393xb.h
@@ -0,0 +1,49 @@
+/*
+ * Toshiba TC6393XB SoC support
+ *
+ * Copyright(c) 2005-2006 Chris Humbert
+ * Copyright(c) 2005 Dirk Opfer
+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
+ * Copyright(c) 2007 Dmitry Baryshkov
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ * Based on locomo.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef TC6393XB_H
+#define TC6393XB_H
+
+/* Also one should provide the CK3P6MI clock */
+struct tc6393xb_platform_data {
+	u16	scr_pll2cr;	/* PLL2 Control */
+	u16	scr_gper;	/* GP Enable */
+	u32	scr_gpo_doecr;	/* GPO Data OE Control */
+	u32	scr_gpo_dsr;	/* GPO Data Set */
+
+	int	(*enable)(struct platform_device *dev);
+	int	(*disable)(struct platform_device *dev);
+	int	(*suspend)(struct platform_device *dev);
+	int	(*resume)(struct platform_device *dev);
+
+	int	irq_base;	/* a base for cascaded irq */
+	int	gpio_base;
+
+	struct tmio_nand_data	*nand_data;
+};
+
+/*
+ * Relative to irq_base
+ */
+#define	IRQ_TC6393_NAND		0
+#define	IRQ_TC6393_MMC		1
+#define	IRQ_TC6393_OHCI		2
+#define	IRQ_TC6393_SERIAL	3
+#define	IRQ_TC6393_FB		4
+
+#define	TC6393XB_NR_IRQS	8
+
+#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
new file mode 100644
index 000000000000..9438d8c9ac1c
--- /dev/null
+++ b/include/linux/mfd/tmio.h
@@ -0,0 +1,17 @@
+#ifndef MFD_TMIO_H
+#define MFD_TMIO_H
+
+/*
+ * data for the NAND controller
+ */
+struct tmio_nand_data {
+	struct nand_bbt_descr	*badblock_pattern;
+	struct mtd_partition	*partition;
+	unsigned int		num_partitions;
+};
+
+#define TMIO_NAND_CONFIG	"tmio-nand-config"
+#define TMIO_NAND_CONTROL	"tmio-nand-control"
+#define TMIO_NAND_IRQ		"tmio-nand"
+
+#endif
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
index e10a90a93b5d..03aea612d284 100644
--- a/include/linux/migrate.h
+++ b/include/linux/migrate.h
@@ -3,28 +3,10 @@
 
 #include <linux/mm.h>
 #include <linux/mempolicy.h>
-#include <linux/pagemap.h>
 
 typedef struct page *new_page_t(struct page *, unsigned long private, int **);
 
 #ifdef CONFIG_MIGRATION
-/* Check if a vma is migratable */
-static inline int vma_migratable(struct vm_area_struct *vma)
-{
-	if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
-		return 0;
-	/*
-	 * Migration allocates pages in the highest zone. If we cannot
-	 * do so then migration (at least from node to node) is not
-	 * possible.
-	 */
-	if (vma->vm_file &&
-		gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping))
-								< policy_zone)
-			return 0;
-	return 1;
-}
-
 extern int isolate_lru_page(struct page *p, struct list_head *pagelist);
 extern int putback_lru_pages(struct list_head *l);
 extern int migrate_page(struct address_space *,
@@ -39,9 +21,6 @@ extern int migrate_vmas(struct mm_struct *mm,
 		const nodemask_t *from, const nodemask_t *to,
 		unsigned long flags);
 #else
-static inline int vma_migratable(struct vm_area_struct *vma)
-					{ return 0; }
-
 static inline int isolate_lru_page(struct page *p, struct list_head *list)
 					{ return -ENOSYS; }
 static inline int putback_lru_pages(struct list_head *l) { return 0; }
diff --git a/include/linux/mlx4/cq.h b/include/linux/mlx4/cq.h
index 071cf96cf01f..6f65b2c8bb89 100644
--- a/include/linux/mlx4/cq.h
+++ b/include/linux/mlx4/cq.h
@@ -39,17 +39,18 @@
 #include <linux/mlx4/doorbell.h>
 
 struct mlx4_cqe {
-	__be32			my_qpn;
+	__be32			vlan_my_qpn;
 	__be32			immed_rss_invalid;
 	__be32			g_mlpath_rqpn;
-	u8			sl;
-	u8			reserved1;
+	__be16			sl_vid;
 	__be16			rlid;
-	__be32			ipoib_status;
+	__be16			status;
+	u8			ipv6_ext_mask;
+	u8			badfcs_enc;
 	__be32			byte_cnt;
 	__be16			wqe_index;
 	__be16			checksum;
-	u8			reserved2[3];
+	u8			reserved[3];
 	u8			owner_sr_opcode;
 };
 
@@ -64,6 +65,11 @@ struct mlx4_err_cqe {
 };
 
 enum {
+	MLX4_CQE_VLAN_PRESENT_MASK	= 1 << 29,
+	MLX4_CQE_QPN_MASK		= 0xffffff,
+};
+
+enum {
 	MLX4_CQE_OWNER_MASK	= 0x80,
 	MLX4_CQE_IS_SEND_MASK	= 0x40,
 	MLX4_CQE_OPCODE_MASK	= 0x1f
@@ -86,13 +92,19 @@ enum {
 };
 
 enum {
-	MLX4_CQE_IPOIB_STATUS_IPV4			= 1 << 22,
-	MLX4_CQE_IPOIB_STATUS_IPV4F			= 1 << 23,
-	MLX4_CQE_IPOIB_STATUS_IPV6			= 1 << 24,
-	MLX4_CQE_IPOIB_STATUS_IPV4OPT			= 1 << 25,
-	MLX4_CQE_IPOIB_STATUS_TCP			= 1 << 26,
-	MLX4_CQE_IPOIB_STATUS_UDP			= 1 << 27,
-	MLX4_CQE_IPOIB_STATUS_IPOK			= 1 << 28,
+	MLX4_CQE_STATUS_IPV4		= 1 << 6,
+	MLX4_CQE_STATUS_IPV4F		= 1 << 7,
+	MLX4_CQE_STATUS_IPV6		= 1 << 8,
+	MLX4_CQE_STATUS_IPV4OPT		= 1 << 9,
+	MLX4_CQE_STATUS_TCP		= 1 << 10,
+	MLX4_CQE_STATUS_UDP		= 1 << 11,
+	MLX4_CQE_STATUS_IPOK		= 1 << 12,
+};
+
+enum {
+	MLX4_CQE_LLC                     = 1,
+	MLX4_CQE_SNAP                    = 1 << 1,
+	MLX4_CQE_BAD_FCS                 = 1 << 4,
 };
 
 static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd,
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 81b3dd5206e0..655ea0d1ee14 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -68,6 +68,14 @@ enum {
 	MLX4_DEV_CAP_FLAG_UD_MCAST	= 1 << 21
 };
 
+enum {
+	MLX4_BMME_FLAG_LOCAL_INV	= 1 <<  6,
+	MLX4_BMME_FLAG_REMOTE_INV	= 1 <<  7,
+	MLX4_BMME_FLAG_TYPE_2_WIN	= 1 <<  9,
+	MLX4_BMME_FLAG_RESERVED_LKEY	= 1 << 10,
+	MLX4_BMME_FLAG_FAST_REG_WR	= 1 << 11,
+};
+
 enum mlx4_event {
 	MLX4_EVENT_TYPE_COMP		   = 0x00,
 	MLX4_EVENT_TYPE_PATH_MIG	   = 0x01,
@@ -184,6 +192,8 @@ struct mlx4_caps {
 	u32			max_msg_sz;
 	u32			page_size_cap;
 	u32			flags;
+	u32			bmme_flags;
+	u32			reserved_lkey;
 	u16			stat_rate_support;
 	u8			port_width_cap[MLX4_MAX_PORTS + 1];
 	int			max_gso_sz;
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 7f128b266faa..bf8f11982dae 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -164,11 +164,13 @@ enum {
 	MLX4_WQE_CTRL_SOLICITED		= 1 << 1,
 	MLX4_WQE_CTRL_IP_CSUM		= 1 << 4,
 	MLX4_WQE_CTRL_TCP_UDP_CSUM	= 1 << 5,
+	MLX4_WQE_CTRL_INS_VLAN		= 1 << 6,
 };
 
 struct mlx4_wqe_ctrl_seg {
 	__be32			owner_opcode;
-	u8			reserved2[3];
+	__be16			vlan_tag;
+	u8			ins_vlan;
 	u8			fence_size;
 	/*
 	 * High 24 bits are SRC remote buffer; low 8 bits are flags:
@@ -219,7 +221,7 @@ struct mlx4_wqe_datagram_seg {
 	__be32			reservd[2];
 };
 
-struct mlx4_lso_seg {
+struct mlx4_wqe_lso_seg {
 	__be32			mss_hdr_size;
 	__be32			header[0];
 };
@@ -233,6 +235,14 @@ struct mlx4_wqe_bind_seg {
 	__be64			length;
 };
 
+enum {
+	MLX4_WQE_FMR_PERM_LOCAL_READ	= 1 << 27,
+	MLX4_WQE_FMR_PERM_LOCAL_WRITE	= 1 << 28,
+	MLX4_WQE_FMR_PERM_REMOTE_READ	= 1 << 29,
+	MLX4_WQE_FMR_PERM_REMOTE_WRITE	= 1 << 30,
+	MLX4_WQE_FMR_PERM_ATOMIC	= 1 << 31
+};
+
 struct mlx4_wqe_fmr_seg {
 	__be32			flags;
 	__be32			mem_key;
@@ -255,11 +265,11 @@ struct mlx4_wqe_fmr_ext_seg {
 };
 
 struct mlx4_wqe_local_inval_seg {
-	u8			flags;
-	u8			reserved1[3];
+	__be32			flags;
+	u32			reserved1;
 	__be32			mem_key;
-	u8			reserved2[3];
-	u8			guest_id;
+	u32			reserved2[2];
+	__be32			guest_id;
 	__be64			pa;
 };
 
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 2128ef7780c6..335288bff1b7 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -41,6 +41,9 @@ extern unsigned long mmap_min_addr;
 
 #define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n))
 
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
+
 /*
  * Linux kernel virtual memory manager primitives.
  * The idea being to have a "virtual" mm in the same way
@@ -100,6 +103,7 @@ extern unsigned int kobjsize(const void *objp);
 #define VM_DONTEXPAND	0x00040000	/* Cannot expand with mremap() */
 #define VM_RESERVED	0x00080000	/* Count as reserved_vm like IO */
 #define VM_ACCOUNT	0x00100000	/* Is a VM accounted object */
+#define VM_NORESERVE	0x00200000	/* should the VM suppress accounting */
 #define VM_HUGETLB	0x00400000	/* Huge TLB Page VM */
 #define VM_NONLINEAR	0x00800000	/* Is non-linear (remap_file_pages) */
 #define VM_MAPPED_COPY	0x01000000	/* T if mapped copy of data (nommu mmap) */
@@ -166,12 +170,16 @@ struct vm_operations_struct {
 	void (*open)(struct vm_area_struct * area);
 	void (*close)(struct vm_area_struct * area);
 	int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf);
-	unsigned long (*nopfn)(struct vm_area_struct *area,
-			unsigned long address);
 
 	/* notification that a previously read-only page is about to become
 	 * writable, if an error is returned it will cause a SIGBUS */
 	int (*page_mkwrite)(struct vm_area_struct *vma, struct page *page);
+
+	/* called by access_process_vm when get_user_pages() fails, typically
+	 * for use by special VMAs that can switch between memory and hardware
+	 */
+	int (*access)(struct vm_area_struct *vma, unsigned long addr,
+		      void *buf, int len, int write);
 #ifdef CONFIG_NUMA
 	/*
 	 * set_policy() op must add a reference to any non-NULL @new mempolicy
@@ -675,13 +683,6 @@ static inline int page_mapped(struct page *page)
 }
 
 /*
- * Error return values for the *_nopfn functions
- */
-#define NOPFN_SIGBUS	((unsigned long) -1)
-#define NOPFN_OOM	((unsigned long) -2)
-#define NOPFN_REFAULT	((unsigned long) -3)
-
-/*
  * Different kinds of faults, as returned by handle_mm_fault().
  * Used to decide whether a process gets delivered SIGBUS or
  * just gets major/minor fault counters bumped up.
@@ -743,6 +744,8 @@ struct zap_details {
 struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		pte_t pte);
 
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size);
 unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
 		unsigned long size, struct zap_details *);
 unsigned long unmap_vmas(struct mmu_gather **tlb,
@@ -772,14 +775,14 @@ struct mm_walk {
 
 int walk_page_range(unsigned long addr, unsigned long end,
 		struct mm_walk *walk);
-void free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
+void free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
 		unsigned long end, unsigned long floor, unsigned long ceiling);
-void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma,
-		unsigned long floor, unsigned long ceiling);
 int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
 			struct vm_area_struct *vma);
 void unmap_mapping_range(struct address_space *mapping,
 		loff_t const holebegin, loff_t const holelen, int even_cows);
+int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
+			void *buf, int len, int write);
 
 static inline void unmap_shared_mapping_range(struct address_space *mapping,
 		loff_t const holebegin, loff_t const holelen)
@@ -809,7 +812,6 @@ extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *
 
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start,
 		int len, int write, int force, struct page **pages, struct vm_area_struct **vmas);
-void print_bad_pte(struct vm_area_struct *, pte_t, unsigned long);
 
 extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
 extern void do_invalidatepage(struct page *page, unsigned long offset);
@@ -832,6 +834,39 @@ extern int mprotect_fixup(struct vm_area_struct *vma,
 			  struct vm_area_struct **pprev, unsigned long start,
 			  unsigned long end, unsigned long newflags);
 
+#ifdef CONFIG_HAVE_GET_USER_PAGES_FAST
+/*
+ * get_user_pages_fast provides equivalent functionality to get_user_pages,
+ * operating on current and current->mm (force=0 and doesn't return any vmas).
+ *
+ * get_user_pages_fast may take mmap_sem and page tables, so no assumptions
+ * can be made about locking. get_user_pages_fast is to be implemented in a
+ * way that is advantageous (vs get_user_pages()) when the user memory area is
+ * already faulted in and present in ptes. However if the pages have to be
+ * faulted in, it may turn out to be slightly slower).
+ */
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages);
+
+#else
+/*
+ * Should probably be moved to asm-generic, and architectures can include it if
+ * they don't implement their own get_user_pages_fast.
+ */
+#define get_user_pages_fast(start, nr_pages, write, pages)	\
+({								\
+	struct mm_struct *mm = current->mm;			\
+	int ret;						\
+								\
+	down_read(&mm->mmap_sem);				\
+	ret = get_user_pages(current, mm, start, nr_pages,	\
+					write, 0, pages, NULL);	\
+	up_read(&mm->mmap_sem);					\
+								\
+	ret;							\
+})
+#endif
+
 /*
  * A callback you can register to apply pressure to ageable caches.
  *
@@ -965,9 +1000,8 @@ static inline void pgtable_page_dtor(struct page *page)
 		NULL: pte_offset_kernel(pmd, address))
 
 extern void free_area_init(unsigned long * zones_size);
-extern void free_area_init_node(int nid, pg_data_t *pgdat,
-	unsigned long * zones_size, unsigned long zone_start_pfn, 
-	unsigned long *zholes_size);
+extern void free_area_init_node(int nid, unsigned long * zones_size,
+		unsigned long zone_start_pfn, unsigned long *zholes_size);
 #ifdef CONFIG_ARCH_POPULATES_NODE_MAP
 /*
  * With CONFIG_ARCH_POPULATES_NODE_MAP set, an architecture may initialise its
@@ -1009,7 +1043,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn,
 extern void get_pfn_range_for_nid(unsigned int nid,
 			unsigned long *start_pfn, unsigned long *end_pfn);
 extern unsigned long find_min_pfn_with_active_regions(void);
-extern unsigned long find_max_pfn_with_active_regions(void);
 extern void free_bootmem_with_active_regions(int nid,
 						unsigned long max_low_pfn);
 typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
@@ -1072,6 +1105,9 @@ extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
 	unsigned long addr, unsigned long len, pgoff_t pgoff);
 extern void exit_mmap(struct mm_struct *);
 
+extern int mm_take_all_locks(struct mm_struct *mm);
+extern void mm_drop_all_locks(struct mm_struct *mm);
+
 #ifdef CONFIG_PROC_FS
 /* From fs/proc/base.c. callers must _not_ hold the mm's exe_file_lock */
 extern void added_exe_file_vma(struct mm_struct *mm);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 02a27ae78539..386edbe2cb4e 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -10,6 +10,7 @@
 #include <linux/rbtree.h>
 #include <linux/rwsem.h>
 #include <linux/completion.h>
+#include <linux/cpumask.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
 
@@ -159,6 +160,17 @@ struct vm_area_struct {
 #endif
 };
 
+struct core_thread {
+	struct task_struct *task;
+	struct core_thread *next;
+};
+
+struct core_state {
+	atomic_t nr_threads;
+	struct core_thread dumper;
+	struct completion startup;
+};
+
 struct mm_struct {
 	struct vm_area_struct * mmap;		/* list of VMAs */
 	struct rb_root mm_rb;
@@ -175,7 +187,6 @@ struct mm_struct {
 	atomic_t mm_users;			/* How many users with user space? */
 	atomic_t mm_count;			/* How many references to "struct mm_struct" (users count as 1) */
 	int map_count;				/* number of VMAs */
-	int core_waiters;
 	struct rw_semaphore mmap_sem;
 	spinlock_t page_table_lock;		/* Protects page tables and some counters */
 
@@ -219,8 +230,7 @@ struct mm_struct {
 
 	unsigned long flags; /* Must use atomic bitops to access the bits */
 
-	/* coredumping support */
-	struct completion *core_startup_done, core_done;
+	struct core_state *core_state; /* coredumping support */
 
 	/* aio bits */
 	rwlock_t		ioctx_list_lock;	/* aio lock */
@@ -244,6 +254,9 @@ struct mm_struct {
 	struct file *exe_file;
 	unsigned long num_exe_file_vmas;
 #endif
+#ifdef CONFIG_MMU_NOTIFIER
+	struct mmu_notifier_mm *mmu_notifier_mm;
+#endif
 };
 
 #endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 0d508ac17d64..ee6e822d5994 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -111,6 +111,8 @@ struct mmc_card {
 	unsigned		num_info;	/* number of info strings */
 	const char		**info;		/* info strings */
 	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
+
+	struct dentry		*debugfs_root;
 };
 
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 10a2080086ca..9c288c909878 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -157,6 +157,8 @@ struct mmc_host {
 	struct led_trigger	*led;		/* activity led */
 #endif
 
+	struct dentry		*debugfs_root;
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
diff --git a/include/linux/mmu_notifier.h b/include/linux/mmu_notifier.h
new file mode 100644
index 000000000000..b77486d152cd
--- /dev/null
+++ b/include/linux/mmu_notifier.h
@@ -0,0 +1,279 @@
+#ifndef _LINUX_MMU_NOTIFIER_H
+#define _LINUX_MMU_NOTIFIER_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm_types.h>
+
+struct mmu_notifier;
+struct mmu_notifier_ops;
+
+#ifdef CONFIG_MMU_NOTIFIER
+
+/*
+ * The mmu notifier_mm structure is allocated and installed in
+ * mm->mmu_notifier_mm inside the mm_take_all_locks() protected
+ * critical section and it's released only when mm_count reaches zero
+ * in mmdrop().
+ */
+struct mmu_notifier_mm {
+	/* all mmu notifiers registerd in this mm are queued in this list */
+	struct hlist_head list;
+	/* to serialize the list modifications and hlist_unhashed */
+	spinlock_t lock;
+};
+
+struct mmu_notifier_ops {
+	/*
+	 * Called either by mmu_notifier_unregister or when the mm is
+	 * being destroyed by exit_mmap, always before all pages are
+	 * freed. This can run concurrently with other mmu notifier
+	 * methods (the ones invoked outside the mm context) and it
+	 * should tear down all secondary mmu mappings and freeze the
+	 * secondary mmu. If this method isn't implemented you've to
+	 * be sure that nothing could possibly write to the pages
+	 * through the secondary mmu by the time the last thread with
+	 * tsk->mm == mm exits.
+	 *
+	 * As side note: the pages freed after ->release returns could
+	 * be immediately reallocated by the gart at an alias physical
+	 * address with a different cache model, so if ->release isn't
+	 * implemented because all _software_ driven memory accesses
+	 * through the secondary mmu are terminated by the time the
+	 * last thread of this mm quits, you've also to be sure that
+	 * speculative _hardware_ operations can't allocate dirty
+	 * cachelines in the cpu that could not be snooped and made
+	 * coherent with the other read and write operations happening
+	 * through the gart alias address, so leading to memory
+	 * corruption.
+	 */
+	void (*release)(struct mmu_notifier *mn,
+			struct mm_struct *mm);
+
+	/*
+	 * clear_flush_young is called after the VM is
+	 * test-and-clearing the young/accessed bitflag in the
+	 * pte. This way the VM will provide proper aging to the
+	 * accesses to the page through the secondary MMUs and not
+	 * only to the ones through the Linux pte.
+	 */
+	int (*clear_flush_young)(struct mmu_notifier *mn,
+				 struct mm_struct *mm,
+				 unsigned long address);
+
+	/*
+	 * Before this is invoked any secondary MMU is still ok to
+	 * read/write to the page previously pointed to by the Linux
+	 * pte because the page hasn't been freed yet and it won't be
+	 * freed until this returns. If required set_page_dirty has to
+	 * be called internally to this method.
+	 */
+	void (*invalidate_page)(struct mmu_notifier *mn,
+				struct mm_struct *mm,
+				unsigned long address);
+
+	/*
+	 * invalidate_range_start() and invalidate_range_end() must be
+	 * paired and are called only when the mmap_sem and/or the
+	 * locks protecting the reverse maps are held. The subsystem
+	 * must guarantee that no additional references are taken to
+	 * the pages in the range established between the call to
+	 * invalidate_range_start() and the matching call to
+	 * invalidate_range_end().
+	 *
+	 * Invalidation of multiple concurrent ranges may be
+	 * optionally permitted by the driver. Either way the
+	 * establishment of sptes is forbidden in the range passed to
+	 * invalidate_range_begin/end for the whole duration of the
+	 * invalidate_range_begin/end critical section.
+	 *
+	 * invalidate_range_start() is called when all pages in the
+	 * range are still mapped and have at least a refcount of one.
+	 *
+	 * invalidate_range_end() is called when all pages in the
+	 * range have been unmapped and the pages have been freed by
+	 * the VM.
+	 *
+	 * The VM will remove the page table entries and potentially
+	 * the page between invalidate_range_start() and
+	 * invalidate_range_end(). If the page must not be freed
+	 * because of pending I/O or other circumstances then the
+	 * invalidate_range_start() callback (or the initial mapping
+	 * by the driver) must make sure that the refcount is kept
+	 * elevated.
+	 *
+	 * If the driver increases the refcount when the pages are
+	 * initially mapped into an address space then either
+	 * invalidate_range_start() or invalidate_range_end() may
+	 * decrease the refcount. If the refcount is decreased on
+	 * invalidate_range_start() then the VM can free pages as page
+	 * table entries are removed.  If the refcount is only
+	 * droppped on invalidate_range_end() then the driver itself
+	 * will drop the last refcount but it must take care to flush
+	 * any secondary tlb before doing the final free on the
+	 * page. Pages will no longer be referenced by the linux
+	 * address space but may still be referenced by sptes until
+	 * the last refcount is dropped.
+	 */
+	void (*invalidate_range_start)(struct mmu_notifier *mn,
+				       struct mm_struct *mm,
+				       unsigned long start, unsigned long end);
+	void (*invalidate_range_end)(struct mmu_notifier *mn,
+				     struct mm_struct *mm,
+				     unsigned long start, unsigned long end);
+};
+
+/*
+ * The notifier chains are protected by mmap_sem and/or the reverse map
+ * semaphores. Notifier chains are only changed when all reverse maps and
+ * the mmap_sem locks are taken.
+ *
+ * Therefore notifier chains can only be traversed when either
+ *
+ * 1. mmap_sem is held.
+ * 2. One of the reverse map locks is held (i_mmap_lock or anon_vma->lock).
+ * 3. No other concurrent thread can access the list (release)
+ */
+struct mmu_notifier {
+	struct hlist_node hlist;
+	const struct mmu_notifier_ops *ops;
+};
+
+static inline int mm_has_notifiers(struct mm_struct *mm)
+{
+	return unlikely(mm->mmu_notifier_mm);
+}
+
+extern int mmu_notifier_register(struct mmu_notifier *mn,
+				 struct mm_struct *mm);
+extern int __mmu_notifier_register(struct mmu_notifier *mn,
+				   struct mm_struct *mm);
+extern void mmu_notifier_unregister(struct mmu_notifier *mn,
+				    struct mm_struct *mm);
+extern void __mmu_notifier_mm_destroy(struct mm_struct *mm);
+extern void __mmu_notifier_release(struct mm_struct *mm);
+extern int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address);
+extern void __mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address);
+extern void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end);
+extern void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end);
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_release(mm);
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	if (mm_has_notifiers(mm))
+		return __mmu_notifier_clear_flush_young(mm, address);
+	return 0;
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_page(mm, address);
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_range_start(mm, start, end);
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_range_end(mm, start, end);
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+	mm->mmu_notifier_mm = NULL;
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_mm_destroy(mm);
+}
+
+/*
+ * These two macros will sometime replace ptep_clear_flush.
+ * ptep_clear_flush is impleemnted as macro itself, so this also is
+ * implemented as a macro until ptep_clear_flush will converted to an
+ * inline function, to diminish the risk of compilation failure. The
+ * invalidate_page method over time can be moved outside the PT lock
+ * and these two macros can be later removed.
+ */
+#define ptep_clear_flush_notify(__vma, __address, __ptep)		\
+({									\
+	pte_t __pte;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	__pte = ptep_clear_flush(___vma, ___address, __ptep);		\
+	mmu_notifier_invalidate_page(___vma->vm_mm, ___address);	\
+	__pte;								\
+})
+
+#define ptep_clear_flush_young_notify(__vma, __address, __ptep)		\
+({									\
+	int __young;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	__young = ptep_clear_flush_young(___vma, ___address, __ptep);	\
+	__young |= mmu_notifier_clear_flush_young(___vma->vm_mm,	\
+						  ___address);		\
+	__young;							\
+})
+
+#else /* CONFIG_MMU_NOTIFIER */
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return 0;
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+}
+
+#define ptep_clear_flush_young_notify ptep_clear_flush_young
+#define ptep_clear_flush_notify ptep_clear_flush
+
+#endif /* CONFIG_MMU_NOTIFIER */
+
+#endif /* _LINUX_MMU_NOTIFIER_H */
diff --git a/include/linux/module.h b/include/linux/module.h
index 3e03b1acbc94..68e09557c951 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -23,7 +23,7 @@
 /* Not Yet Implemented */
 #define MODULE_SUPPORTED_DEVICE(name)
 
-/* v850 toolchain uses a `_' prefix for all user symbols */
+/* some toolchains uses a `_' prefix for all user symbols */
 #ifndef MODULE_SYMBOL_PREFIX
 #define MODULE_SYMBOL_PREFIX ""
 #endif
@@ -249,27 +249,30 @@ struct module
 
 	/* Exported symbols */
 	const struct kernel_symbol *syms;
-	unsigned int num_syms;
 	const unsigned long *crcs;
+	unsigned int num_syms;
 
 	/* GPL-only exported symbols. */
-	const struct kernel_symbol *gpl_syms;
 	unsigned int num_gpl_syms;
+	const struct kernel_symbol *gpl_syms;
 	const unsigned long *gpl_crcs;
 
+#ifdef CONFIG_UNUSED_SYMBOLS
 	/* unused exported symbols. */
 	const struct kernel_symbol *unused_syms;
-	unsigned int num_unused_syms;
 	const unsigned long *unused_crcs;
+	unsigned int num_unused_syms;
+
 	/* GPL-only, unused exported symbols. */
-	const struct kernel_symbol *unused_gpl_syms;
 	unsigned int num_unused_gpl_syms;
+	const struct kernel_symbol *unused_gpl_syms;
 	const unsigned long *unused_gpl_crcs;
+#endif
 
 	/* symbols that will be GPL-only in the near future. */
 	const struct kernel_symbol *gpl_future_syms;
-	unsigned int num_gpl_future_syms;
 	const unsigned long *gpl_future_crcs;
+	unsigned int num_gpl_future_syms;
 
 	/* Exception table */
 	unsigned int num_exentries;
@@ -285,10 +288,10 @@ struct module
 	void *module_core;
 
 	/* Here are the sizes of the init and core sections */
-	unsigned long init_size, core_size;
+	unsigned int init_size, core_size;
 
 	/* The size of the executable code in each section.  */
-	unsigned long init_text_size, core_text_size;
+	unsigned int init_text_size, core_text_size;
 
 	/* The handle returned from unwind_add_table. */
 	void *unwind_info;
@@ -300,29 +303,15 @@ struct module
 
 #ifdef CONFIG_GENERIC_BUG
 	/* Support for BUG */
+	unsigned num_bugs;
 	struct list_head bug_list;
 	struct bug_entry *bug_table;
-	unsigned num_bugs;
-#endif
-
-#ifdef CONFIG_MODULE_UNLOAD
-	/* Reference counts */
-	struct module_ref ref[NR_CPUS];
-
-	/* What modules depend on me? */
-	struct list_head modules_which_use_me;
-
-	/* Who is waiting for us to be unloaded */
-	struct task_struct *waiter;
-
-	/* Destruction function. */
-	void (*exit)(void);
 #endif
 
 #ifdef CONFIG_KALLSYMS
 	/* We keep the symbol and string tables for kallsyms. */
 	Elf_Sym *symtab;
-	unsigned long num_symtab;
+	unsigned int num_symtab;
 	char *strtab;
 
 	/* Section attributes */
@@ -342,6 +331,21 @@ struct module
 	struct marker *markers;
 	unsigned int num_markers;
 #endif
+
+#ifdef CONFIG_MODULE_UNLOAD
+	/* What modules depend on me? */
+	struct list_head modules_which_use_me;
+
+	/* Who is waiting for us to be unloaded */
+	struct task_struct *waiter;
+
+	/* Destruction function. */
+	void (*exit)(void);
+
+	/* Reference counts */
+	struct module_ref ref[NR_CPUS];
+#endif
+
 };
 #ifndef MODULE_ARCH_INIT
 #define MODULE_ARCH_INIT {}
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 4374d1adeb4b..30a1d63b6fb5 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -47,7 +47,7 @@ struct vfsmount {
 	struct list_head mnt_child;	/* and going through their mnt_child */
 	int mnt_flags;
 	/* 4 bytes hole on 64bits arches */
-	char *mnt_devname;		/* Name of device e.g. /dev/dsk/hda1 */
+	const char *mnt_devname;	/* Name of device e.g. /dev/dsk/hda1 */
 	struct list_head mnt_list;
 	struct list_head mnt_expire;	/* link in fs-specific expiry list */
 	struct list_head mnt_share;	/* circular list of shared mounts */
@@ -105,7 +105,8 @@ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
 
 struct nameidata;
 
-extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
+struct path;
+extern int do_add_mount(struct vfsmount *newmnt, struct path *path,
 			int mnt_flags, struct list_head *fslist);
 
 extern void mark_mounts_for_expiry(struct list_head *mounts);
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index de4decfa1bfc..07112ee9293a 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -144,11 +144,37 @@ static inline int ip_mroute_opt(int opt)
 }
 #endif
 
+#ifdef CONFIG_IP_MROUTE
 extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int);
 extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
 extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
-extern void ip_mr_init(void);
+extern int ip_mr_init(void);
+#else
+static inline
+int ip_mroute_setsockopt(struct sock *sock,
+			 int optname, char __user *optval, int optlen)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline
+int ip_mroute_getsockopt(struct sock *sock,
+			 int optname, char __user *optval, int __user *optlen)
+{
+	return -ENOPROTOOPT;
+}
 
+static inline
+int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+static inline int ip_mr_init(void)
+{
+	return 0;
+}
+#endif
 
 struct vif_device
 {
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index e7989593142b..5cf50473a10f 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -131,11 +131,44 @@ static inline int ip6_mroute_opt(int opt)
 
 struct sock;
 
+#ifdef CONFIG_IPV6_MROUTE
 extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, int);
 extern int ip6_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
 extern int ip6_mr_input(struct sk_buff *skb);
 extern int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg);
-extern void ip6_mr_init(void);
+extern int ip6_mr_init(void);
+extern void ip6_mr_cleanup(void);
+#else
+static inline
+int ip6_mroute_setsockopt(struct sock *sock,
+			  int optname, char __user *optval, int optlen)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline
+int ip6_mroute_getsockopt(struct sock *sock,
+			  int optname, char __user *optval, int __user *optlen)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline
+int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+static inline int ip6_mr_init(void)
+{
+	return 0;
+}
+
+static inline void ip6_mr_cleanup(void)
+{
+	return;
+}
+#endif
 
 struct mif_device
 {
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 81cd36b735b0..ba63858056c7 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -2,11 +2,11 @@
 #define _LINUX_MSDOS_FS_H
 
 #include <linux/magic.h>
+#include <asm/byteorder.h>
 
 /*
  * The MS-DOS filesystem constants/structures
  */
-#include <asm/byteorder.h>
 
 #define SECTOR_SIZE	512		/* sector size (bytes) */
 #define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
@@ -89,24 +89,22 @@
 #define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
 			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
 
+struct __fat_dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
 /*
  * ioctl commands
  */
-#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct dirent [2])
-#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct dirent [2])
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
 /* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
 #define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
 #define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
 
-/*
- * vfat shortname flags
- */
-#define VFAT_SFN_DISPLAY_LOWER	0x0001 /* convert to lowercase for display */
-#define VFAT_SFN_DISPLAY_WIN95	0x0002 /* emulate win95 rule for display */
-#define VFAT_SFN_DISPLAY_WINNT	0x0004 /* emulate winnt rule for display */
-#define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
-#define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
-
 struct fat_boot_sector {
 	__u8	ignored[3];	/* Boot strap short or near jump */
 	__u8	system_id[8];	/* Name - can be used to special case
@@ -168,14 +166,6 @@ struct msdos_dir_slot {
 	__u8    name11_12[4];	/* last 2 characters in name */
 };
 
-struct fat_slot_info {
-	loff_t i_pos;		/* on-disk position of directory entry */
-	loff_t slot_off;	/* offset for slot or de start */
-	int nr_slots;		/* number of slots + 1(de) in filename */
-	struct msdos_dir_entry *de;
-	struct buffer_head *bh;
-};
-
 #ifdef __KERNEL__
 
 #include <linux/buffer_head.h>
@@ -184,6 +174,15 @@ struct fat_slot_info {
 #include <linux/fs.h>
 #include <linux/mutex.h>
 
+/*
+ * vfat shortname flags
+ */
+#define VFAT_SFN_DISPLAY_LOWER	0x0001 /* convert to lowercase for display */
+#define VFAT_SFN_DISPLAY_WIN95	0x0002 /* emulate win95 rule for display */
+#define VFAT_SFN_DISPLAY_WINNT	0x0004 /* emulate winnt rule for display */
+#define VFAT_SFN_CREATE_WIN95	0x0100 /* emulate win95 rule for create */
+#define VFAT_SFN_CREATE_WINNT	0x0200 /* emulate winnt rule for create */
+
 struct fat_mount_options {
 	uid_t fs_uid;
 	gid_t fs_gid;
@@ -202,10 +201,10 @@ struct fat_mount_options {
 		 utf8:1,	  /* Use of UTF-8 character set (Default) */
 		 unicode_xlate:1, /* create escape sequences for unhandled Unicode */
 		 numtail:1,       /* Does first alias have a numeric '~1' type tail? */
-		 atari:1,         /* Use Atari GEMDOS variation of MS-DOS fs */
 		 flush:1,	  /* write things quickly */
 		 nocase:1,	  /* Does this need case conversion? 0=need case conversion*/
-		 usefree:1;	  /* Use free_clusters for FAT32 */
+		 usefree:1,	  /* Use free_clusters for FAT32 */
+		 tz_utc:1;	  /* Filesystem timestamps are in UTC */
 };
 
 #define FAT_HASH_BITS	8
@@ -267,6 +266,14 @@ struct msdos_inode_info {
 	struct inode vfs_inode;
 };
 
+struct fat_slot_info {
+	loff_t i_pos;		/* on-disk position of directory entry */
+	loff_t slot_off;	/* offset for slot or de start */
+	int nr_slots;		/* number of slots + 1(de) in filename */
+	struct msdos_dir_entry *de;
+	struct buffer_head *bh;
+};
+
 static inline struct msdos_sb_info *MSDOS_SB(struct super_block *sb)
 {
 	return sb->s_fs_info;
@@ -428,8 +435,9 @@ extern int fat_flush_inodes(struct super_block *sb, struct inode *i1,
 extern void fat_fs_panic(struct super_block *s, const char *fmt, ...);
 extern void fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
-extern int date_dos2unix(unsigned short time, unsigned short date);
-extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date);
+extern int date_dos2unix(unsigned short time, unsigned short date, int tz_utc);
+extern void fat_date_unix2dos(int unix_date, __le16 *time, __le16 *date,
+			      int tz_utc);
 extern int fat_sync_bhs(struct buffer_head **bhs, int nr_bhs);
 
 int fat_cache_init(void);
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
index 9a6e2f953cba..310e61606415 100644
--- a/include/linux/mtd/blktrans.h
+++ b/include/linux/mtd/blktrans.h
@@ -1,6 +1,4 @@
 /*
- * $Id: blktrans.h,v 1.6 2005/11/07 11:14:54 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux block layer for MTD 'translation layers'.
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index b0ddf4b25862..d6fb115f5a07 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -1,7 +1,6 @@
 
 /* Common Flash Interface structures
  * See http://support.intel.com/design/flash/technote/index.htm
- * $Id: cfi.h,v 1.57 2005/11/15 23:28:17 tpoynor Exp $
  */
 
 #ifndef __MTD_CFI_H__
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
index 25724f7d3867..d802f7736be3 100644
--- a/include/linux/mtd/cfi_endian.h
+++ b/include/linux/mtd/cfi_endian.h
@@ -1,8 +1,3 @@
-/*
- * $Id: cfi_endian.h,v 1.11 2002/01/30 23:20:48 awozniak Exp $
- *
- */
-
 #include <asm/byteorder.h>
 
 #ifndef CONFIG_MTD_CFI_ADV_OPTIONS
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
index ed8dc6755219..c02f3d264ecf 100644
--- a/include/linux/mtd/concat.h
+++ b/include/linux/mtd/concat.h
@@ -4,8 +4,6 @@
  * (C) 2002 Robert Kaiser <rkaiser@sysgo.de>
  *
  * This code is GPL
- *
- * $Id: concat.h,v 1.1 2002/03/08 16:34:36 rkaiser Exp $
  */
 
 #ifndef MTD_CONCAT_H
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
index 9addd073bf15..0a6d516ab71d 100644
--- a/include/linux/mtd/doc2000.h
+++ b/include/linux/mtd/doc2000.h
@@ -6,8 +6,6 @@
  * Copyright (C) 2002-2003 Greg Ungerer <gerg@snapgear.com>
  * Copyright (C) 2002-2003 SnapGear Inc
  *
- * $Id: doc2000.h,v 1.25 2005/11/07 11:14:54 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index 39e7d2a1be9a..08dd131301c1 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -5,9 +5,6 @@
  * Contains information about the location and state of a given flash device
  *
  * (C) 2000 Red Hat. GPLd.
- *
- * $Id: flashchip.h,v 1.18 2005/11/07 11:14:54 gleixner Exp $
- *
  */
 
 #ifndef __MTD_FLASHCHIP_H__
diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h
index d99609113307..0be442f881dd 100644
--- a/include/linux/mtd/ftl.h
+++ b/include/linux/mtd/ftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: ftl.h,v 1.7 2005/11/07 11:14:54 gleixner Exp $
- *
  * Derived from (and probably identical to):
  * ftl.h 1.7 1999/10/25 20:23:17
  *
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
index 256e7342ed1e..df362ddf2949 100644
--- a/include/linux/mtd/gen_probe.h
+++ b/include/linux/mtd/gen_probe.h
@@ -1,7 +1,6 @@
 /*
  * (C) 2001, 2001 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_GEN_PROBE_H__
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 85fd041d44ad..64ee53ce95a9 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -2,8 +2,6 @@
  *	inftl.h -- defines to support the Inverse NAND Flash Translation Layer
  *
  *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- *	$Id: inftl.h,v 1.7 2005/06/13 13:08:45 sean Exp $
  */
 
 #ifndef __MTD_INFTL_H__
@@ -52,8 +50,6 @@ struct INFTLrecord {
 int INFTL_mount(struct INFTLrecord *s);
 int INFTL_formatblock(struct INFTLrecord *s, int block);
 
-extern char inftlmountrev[];
-
 void INFTL_dumptables(struct INFTLrecord *s);
 void INFTL_dumpVUchains(struct INFTLrecord *s);
 
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index a9fae032ba81..aa30244492c6 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -1,6 +1,5 @@
 
 /* Overhauled routines for dealing with different mmap regions of flash */
-/* $Id: map.h,v 1.54 2005/11/07 11:14:54 gleixner Exp $ */
 
 #ifndef __LINUX_MTD_MAP_H__
 #define __LINUX_MTD_MAP_H__
@@ -189,7 +188,7 @@ typedef union {
 */
 
 struct map_info {
-	char *name;
+	const char *name;
 	unsigned long size;
 	resource_size_t phys;
 #define NO_XIP (-1UL)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 245f9098e171..922636548558 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
- *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
  *
  * Released under GPL
@@ -121,7 +119,7 @@ struct mtd_info {
 	u_int32_t oobavail;  // Available OOB bytes per block
 
 	// Kernel-only stuff starts here.
-	char *name;
+	const char *name;
 	int index;
 
 	/* ecc layout structure pointer - read only ! */
@@ -274,7 +272,11 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 			printk(KERN_INFO args);		\
 	} while(0)
 #else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) do { } while(0)
+#define DEBUG(n, args...)				\
+	do {						\
+		if (0)					\
+			printk(KERN_INFO args);		\
+	} while(0)
 
 #endif /* CONFIG_MTD_DEBUG */
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 53ea3dc8b0e8..81774e5facf4 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -5,8 +5,6 @@
  *                     Steven J. Hill <sjhill@realitydiluted.com>
  *		       Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand.h,v 1.74 2005/09/15 13:58:50 vwool Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -179,6 +177,9 @@ typedef enum {
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+/* Large page NAND with SOFT_ECC should support subpage reads */
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+					&& (chip->page_shift > 9))
 
 /* Mask to zero out the chip options, which come from the id table */
 #define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
@@ -276,6 +277,10 @@ struct nand_ecc_ctrl {
 	int			(*read_page)(struct mtd_info *mtd,
 					     struct nand_chip *chip,
 					     uint8_t *buf);
+	int			(*read_subpage)(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     uint32_t offs, uint32_t len,
+					     uint8_t *buf);
 	void			(*write_page)(struct mtd_info *mtd,
 					      struct nand_chip *chip,
 					      const uint8_t *buf);
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 12c5bc342ead..090da505425d 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index 001eec50cac6..dcaf611ed748 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $
- *
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
 
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 7c37d7e55abc..5014f7a9f5df 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: partitions.h,v 1.17 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef MTD_PARTITIONS_H
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index 0dc07d5f3354..c8e63a5ee72e 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -2,8 +2,6 @@
  * For boards with physically mapped flash and using
  * drivers/mtd/maps/physmap.c mapping driver.
  *
- * $Id: physmap.h,v 1.4 2005/11/07 11:14:55 gleixner Exp $
- *
  * Copyright (C) 2003 MontaVista Software Inc.
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
index 0e37ad07bce2..e07890aff1cf 100644
--- a/include/linux/mtd/plat-ram.h
+++ b/include/linux/mtd/plat-ram.h
@@ -6,8 +6,6 @@
  *
  * Generic platform device based RAM map
  *
- * $Id: plat-ram.h,v 1.2 2005/01/24 00:37:40 bjd Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h
index 5cc070c24d88..27ad40aed19f 100644
--- a/include/linux/mtd/pmc551.h
+++ b/include/linux/mtd/pmc551.h
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
@@ -17,7 +15,7 @@
 
 #include <linux/mtd/mtd.h>
 
-#define PMC551_VERSION "$Id: pmc551.h,v 1.6 2005/11/07 11:14:55 gleixner Exp $\n"\
+#define PMC551_VERSION \
        "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n"
 
 /*
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index f71201d0f3e7..6316fafe5c2a 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -45,13 +45,13 @@ enum {
  * @size: how many physical eraseblocks are reserved for this volume
  * @used_bytes: how many bytes of data this volume contains
  * @used_ebs: how many physical eraseblocks of this volume actually contain any
- * data
+ *            data
  * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
  * @corrupted: non-zero if the volume is corrupted (static volumes only)
  * @upd_marker: non-zero if the volume has update marker set
  * @alignment: volume alignment
  * @usable_leb_size: how many bytes are available in logical eraseblocks of
- * this volume
+ *                   this volume
  * @name_len: volume name length
  * @name: volume name
  * @cdev: UBI volume character device major and minor numbers
@@ -152,6 +152,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
 int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
 int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype);
 int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
+int ubi_sync(int ubi_num);
 
 /*
  * This function is the same as the 'ubi_leb_read()' function, but it does not
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index e9d40bdde48c..36efcba15ecd 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -11,8 +11,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.5 2005/11/07 11:14:55 gleixner Exp $
  */
 
 #ifndef __LINUX_MTD_XIP_H__
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index a15cdd4a8e58..12078577aef6 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -17,30 +17,59 @@
 
 struct mv643xx_eth_shared_platform_data {
 	struct mbus_dram_target_info	*dram;
-	unsigned int	t_clk;
+	unsigned int		t_clk;
 };
 
 struct mv643xx_eth_platform_data {
+	/*
+	 * Pointer back to our parent instance, and our port number.
+	 */
 	struct platform_device	*shared;
-	int		port_number;
+	int			port_number;
 
+	/*
+	 * Whether a PHY is present, and if yes, at which address.
+	 */
 	struct platform_device	*shared_smi;
+	int			force_phy_addr;
+	int			phy_addr;
 
-	u16		force_phy_addr;	/* force override if phy_addr == 0 */
-	u16		phy_addr;
-
-	/* If speed is 0, then speed and duplex are autonegotiated. */
-	int		speed;		/* 0, SPEED_10, SPEED_100, SPEED_1000 */
-	int		duplex;		/* DUPLEX_HALF or DUPLEX_FULL */
-
-	/* non-zero values of the following fields override defaults */
-	u32		tx_queue_size;
-	u32		rx_queue_size;
-	u32		tx_sram_addr;
-	u32		tx_sram_size;
-	u32		rx_sram_addr;
-	u32		rx_sram_size;
-	u8		mac_addr[6];	/* mac address if non-zero*/
+	/*
+	 * Use this MAC address if it is valid, overriding the
+	 * address that is already in the hardware.
+	 */
+	u8			mac_addr[6];
+
+	/*
+	 * If speed is 0, autonegotiation is enabled.
+	 *   Valid values for speed: 0, SPEED_10, SPEED_100, SPEED_1000.
+	 *   Valid values for duplex: DUPLEX_HALF, DUPLEX_FULL.
+	 */
+	int			speed;
+	int			duplex;
+
+	/*
+	 * Which RX/TX queues to use.
+	 */
+	int			rx_queue_mask;
+	int			tx_queue_mask;
+
+	/*
+	 * Override default RX/TX queue sizes if nonzero.
+	 */
+	int			rx_queue_size;
+	int			tx_queue_size;
+
+	/*
+	 * Use on-chip SRAM for RX/TX descriptors if size is nonzero
+	 * and sufficient to contain all descriptors for the requested
+	 * ring sizes.
+	 */
+	unsigned long		rx_sram_addr;
+	int			rx_sram_size;
+	unsigned long		tx_sram_addr;
+	int			tx_sram_size;
 };
 
-#endif /* __LINUX_MV643XX_ETH_H */
+
+#endif
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 24d88e98a626..68f8c3203c89 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -47,27 +47,24 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
 #define LOOKUP_DIRECTORY	 2
 #define LOOKUP_CONTINUE		 4
 #define LOOKUP_PARENT		16
-#define LOOKUP_NOALT		32
 #define LOOKUP_REVAL		64
 /*
  * Intent data
  */
 #define LOOKUP_OPEN		(0x0100)
 #define LOOKUP_CREATE		(0x0200)
-#define LOOKUP_ACCESS		(0x0400)
-#define LOOKUP_CHDIR		(0x0800)
-
-extern int __user_walk(const char __user *, unsigned, struct nameidata *);
-extern int __user_walk_fd(int dfd, const char __user *, unsigned, struct nameidata *);
-#define user_path_walk(name,nd) \
-	__user_walk_fd(AT_FDCWD, name, LOOKUP_FOLLOW, nd)
-#define user_path_walk_link(name,nd) \
-	__user_walk_fd(AT_FDCWD, name, 0, nd)
+
+extern int user_path_at(int, const char __user *, unsigned, struct path *);
+
+#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path)
+#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path)
+#define user_path_dir(name, path) \
+	user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path)
+
 extern int path_lookup(const char *, unsigned, struct nameidata *);
 extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
 			   const char *, unsigned int, struct nameidata *);
 
-extern int __user_path_lookup_open(const char __user *, unsigned lookup_flags, struct nameidata *nd, int open_flags);
 extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
 extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
 		int (*open)(struct inode *, struct file *));
diff --git a/include/linux/net.h b/include/linux/net.h
index 71f7dd559285..4a9a30f2d68f 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -20,6 +20,7 @@
 
 #include <linux/wait.h>
 #include <linux/socket.h>
+#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <asm/socket.h>
 
 struct poll_table_struct;
@@ -46,6 +47,7 @@ struct net;
 #define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
 #define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
 #define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
+#define SYS_PACCEPT	18		/* sys_paccept(2)		*/
 
 typedef enum {
 	SS_FREE = 0,			/* not allocated		*/
@@ -94,6 +96,15 @@ enum sock_type {
 };
 
 #define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1.  The
+ * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, paccept */
+#define SOCK_CLOEXEC	O_CLOEXEC
+#ifndef SOCK_NONBLOCK
+#define SOCK_NONBLOCK	O_NONBLOCK
+#endif
 
 #endif /* ARCH_HAS_SOCKET_TYPES */
 
@@ -106,23 +117,23 @@ enum sock_shutdown_cmd {
 /**
  *  struct socket - general BSD socket
  *  @state: socket state (%SS_CONNECTED, etc)
+ *  @type: socket type (%SOCK_STREAM, etc)
  *  @flags: socket flags (%SOCK_ASYNC_NOSPACE, etc)
  *  @ops: protocol specific socket operations
  *  @fasync_list: Asynchronous wake up list
  *  @file: File back pointer for gc
  *  @sk: internal networking protocol agnostic socket representation
  *  @wait: wait queue for several uses
- *  @type: socket type (%SOCK_STREAM, etc)
  */
 struct socket {
 	socket_state		state;
+	short			type;
 	unsigned long		flags;
 	const struct proto_ops	*ops;
 	struct fasync_struct	*fasync_list;
 	struct file		*file;
 	struct sock		*sk;
 	wait_queue_head_t	wait;
-	short			type;
 };
 
 struct vm_area_struct;
@@ -208,10 +219,12 @@ extern int   	     sock_sendmsg(struct socket *sock, struct msghdr *msg,
 				  size_t len);
 extern int	     sock_recvmsg(struct socket *sock, struct msghdr *msg,
 				  size_t size, int flags);
-extern int 	     sock_map_fd(struct socket *sock);
+extern int 	     sock_map_fd(struct socket *sock, int flags);
 extern struct socket *sockfd_lookup(int fd, int *err);
 #define		     sockfd_put(sock) fput(sock->file)
 extern int	     net_ratelimit(void);
+extern long	     do_accept(int fd, struct sockaddr __user *upeer_sockaddr,
+			       int __user *upeer_addrlen, int flags);
 
 #define net_random()		random32()
 #define net_srandom(seed)	srandom32((__force u32)seed)
@@ -338,8 +351,7 @@ static const struct proto_ops name##_ops = {			\
 
 #ifdef CONFIG_SYSCTL
 #include <linux/sysctl.h>
-extern int net_msg_cost;
-extern int net_msg_burst;
+extern struct ratelimit_state net_ratelimit_state;
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 25f87102ab66..488c56e649b5 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -61,9 +61,7 @@ struct wireless_dev;
 #define NET_XMIT_DROP		1	/* skb dropped			*/
 #define NET_XMIT_CN		2	/* congestion notification	*/
 #define NET_XMIT_POLICED	3	/* skb is shot by police	*/
-#define NET_XMIT_BYPASS		4	/* packet does not leave via dequeue;
-					   (TC use only - dev_queue_xmit
-					   returns this as NET_XMIT_SUCCESS) */
+#define NET_XMIT_MASK		0xFFFF	/* qdisc flags in net/sch_generic.h */
 
 /* Backlog congestion levels */
 #define NET_RX_SUCCESS		0   /* keep 'em coming, baby */
@@ -118,14 +116,6 @@ struct wireless_dev;
 
 #endif  /*  __KERNEL__  */
 
-struct net_device_subqueue
-{
-	/* Give a control state for each queue.  This struct may contain
-	 * per-queue locks in the future.
-	 */
-	unsigned long   state;
-};
-
 /*
  *	Network device statistics. Akin to the 2.0 ether stats but
  *	with byte counters.
@@ -281,14 +271,11 @@ struct header_ops {
 
 enum netdev_state_t
 {
-	__LINK_STATE_XOFF=0,
 	__LINK_STATE_START,
 	__LINK_STATE_PRESENT,
-	__LINK_STATE_SCHED,
 	__LINK_STATE_NOCARRIER,
 	__LINK_STATE_LINKWATCH_PENDING,
 	__LINK_STATE_DORMANT,
-	__LINK_STATE_QDISC_RUNNING,
 };
 
 
@@ -448,6 +435,21 @@ static inline void napi_synchronize(const struct napi_struct *n)
 # define napi_synchronize(n)	barrier()
 #endif
 
+enum netdev_queue_state_t
+{
+	__QUEUE_STATE_XOFF,
+	__QUEUE_STATE_FROZEN,
+};
+
+struct netdev_queue {
+	struct net_device	*dev;
+	struct Qdisc		*qdisc;
+	unsigned long		state;
+	spinlock_t		_xmit_lock;
+	int			xmit_lock_owner;
+	struct Qdisc		*qdisc_sleeping;
+} ____cacheline_aligned_in_smp;
+
 /*
  *	The DEVICE structure.
  *	Actually, this whole structure is a big mistake.  It mixes I/O
@@ -516,7 +518,6 @@ struct net_device
 #define NETIF_F_LLTX		4096	/* LockLess TX - deprecated. Please */
 					/* do not use LLTX in new drivers */
 #define NETIF_F_NETNS_LOCAL	8192	/* Does not change network namespaces */
-#define NETIF_F_MULTI_QUEUE	16384	/* Has multiple TX/RX queues */
 #define NETIF_F_LRO		32768	/* large receive offload */
 
 	/* Segmentation offload features */
@@ -537,8 +538,6 @@ struct net_device
 #define NETIF_F_V6_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IPV6_CSUM)
 #define NETIF_F_ALL_CSUM	(NETIF_F_V4_CSUM | NETIF_F_V6_CSUM)
 
-	struct net_device	*next_sched;
-
 	/* Interface index. Unique device identifier	*/
 	int			ifindex;
 	int			iflink;
@@ -594,13 +593,14 @@ struct net_device
 	unsigned char		addr_len;	/* hardware address length	*/
 	unsigned short          dev_id;		/* for shared network cards */
 
+	spinlock_t		addr_list_lock;
 	struct dev_addr_list	*uc_list;	/* Secondary unicast mac addresses */
 	int			uc_count;	/* Number of installed ucasts	*/
 	int			uc_promisc;
 	struct dev_addr_list	*mc_list;	/* Multicast mac addresses	*/
 	int			mc_count;	/* Number of installed mcasts	*/
-	int			promiscuity;
-	int			allmulti;
+	unsigned int		promiscuity;
+	unsigned int		allmulti;
 
 
 	/* Protocol specific pointers */
@@ -624,32 +624,21 @@ struct net_device
 
 	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
 
-	/* ingress path synchronizer */
-	spinlock_t		ingress_lock;
-	struct Qdisc		*qdisc_ingress;
+	struct netdev_queue	rx_queue;
 
-/*
- * Cache line mostly used on queue transmit path (qdisc)
- */
-	/* device queue lock */
-	spinlock_t		queue_lock ____cacheline_aligned_in_smp;
-	struct Qdisc		*qdisc;
-	struct Qdisc		*qdisc_sleeping;
-	struct list_head	qdisc_list;
-	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
+	struct netdev_queue	*_tx ____cacheline_aligned_in_smp;
+
+	/* Number of TX queues allocated at alloc_netdev_mq() time  */
+	unsigned int		num_tx_queues;
 
-	/* Partially transmitted GSO packet. */
-	struct sk_buff		*gso_skb;
+	/* Number of TX queues currently active in device  */
+	unsigned int		real_num_tx_queues;
 
+	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
+	spinlock_t		tx_global_lock;
 /*
  * One part is mostly used on xmit path (device)
  */
-	/* hard_start_xmit synchronizer */
-	spinlock_t		_xmit_lock ____cacheline_aligned_in_smp;
-	/* cpu id of processor entered to hard_start_xmit or -1,
-	   if nobody entered there.
-	 */
-	int			xmit_lock_owner;
 	void			*priv;	/* pointer to private data	*/
 	int			(*hard_start_xmit) (struct sk_buff *skb,
 						    struct net_device *dev);
@@ -728,6 +717,9 @@ struct net_device
 	void                    (*poll_controller)(struct net_device *dev);
 #endif
 
+	u16			(*select_queue)(struct net_device *dev,
+						struct sk_buff *skb);
+
 #ifdef CONFIG_NET_NS
 	/* Network namespace this network device is inside */
 	struct net		*nd_net;
@@ -740,6 +732,8 @@ struct net_device
 	struct net_bridge_port	*br_port;
 	/* macvlan */
 	struct macvlan_port	*macvlan_port;
+	/* GARP */
+	struct garp_port	*garp_port;
 
 	/* class/net/name entry */
 	struct device		dev;
@@ -755,16 +749,31 @@ struct net_device
 	/* for setting kernel sock attribute on TCP connection setup */
 #define GSO_MAX_SIZE		65536
 	unsigned int		gso_max_size;
-
-	/* The TX queue control structures */
-	unsigned int			egress_subqueue_count;
-	struct net_device_subqueue	egress_subqueue[1];
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 
 #define	NETDEV_ALIGN		32
 #define	NETDEV_ALIGN_CONST	(NETDEV_ALIGN - 1)
 
+static inline
+struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
+					 unsigned int index)
+{
+	return &dev->_tx[index];
+}
+
+static inline void netdev_for_each_tx_queue(struct net_device *dev,
+					    void (*f)(struct net_device *,
+						      struct netdev_queue *,
+						      void *),
+					    void *arg)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++)
+		f(dev, &dev->_tx[i], arg);
+}
+
 /*
  * Net namespace inlines
  */
@@ -795,7 +804,9 @@ void dev_net_set(struct net_device *dev, struct net *net)
  */
 static inline void *netdev_priv(const struct net_device *dev)
 {
-	return dev->priv;
+	return (char *)dev + ((sizeof(struct net_device)
+			       + NETDEV_ALIGN_CONST)
+			      & ~NETDEV_ALIGN_CONST);
 }
 
 /* Set the sysfs physical device reference for the network logical device
@@ -830,6 +841,19 @@ static inline void netif_napi_add(struct net_device *dev,
 	set_bit(NAPI_STATE_SCHED, &napi->state);
 }
 
+/**
+ *  netif_napi_del - remove a napi context
+ *  @napi: napi context
+ *
+ *  netif_napi_del() removes a napi context from the network device napi list
+ */
+static inline void netif_napi_del(struct napi_struct *napi)
+{
+#ifdef CONFIG_NETPOLL
+	list_del(&napi->dev_list);
+#endif
+}
+
 struct packet_type {
 	__be16			type;	/* This is really htons(ether_type). */
 	struct net_device	*dev;	/* NULL is wildcarded here	     */
@@ -890,6 +914,7 @@ extern struct net_device	*__dev_get_by_name(struct net *net, const char *name);
 extern int		dev_alloc_name(struct net_device *dev, const char *name);
 extern int		dev_open(struct net_device *dev);
 extern int		dev_close(struct net_device *dev);
+extern void		dev_disable_lro(struct net_device *dev);
 extern int		dev_queue_xmit(struct sk_buff *skb);
 extern int		register_netdevice(struct net_device *dev);
 extern void		unregister_netdevice(struct net_device *dev);
@@ -939,7 +964,7 @@ static inline int unregister_gifconf(unsigned int family)
  */
 struct softnet_data
 {
-	struct net_device	*output_queue;
+	struct Qdisc		*output_queue;
 	struct sk_buff_head	input_pkt_queue;
 	struct list_head	poll_list;
 	struct sk_buff		*completion_queue;
@@ -954,12 +979,25 @@ DECLARE_PER_CPU(struct softnet_data,softnet_data);
 
 #define HAVE_NETIF_QUEUE
 
-extern void __netif_schedule(struct net_device *dev);
+extern void __netif_schedule(struct Qdisc *q);
 
-static inline void netif_schedule(struct net_device *dev)
+static inline void netif_schedule_queue(struct netdev_queue *txq)
 {
-	if (!test_bit(__LINK_STATE_XOFF, &dev->state))
-		__netif_schedule(dev);
+	if (!test_bit(__QUEUE_STATE_XOFF, &txq->state))
+		__netif_schedule(txq->qdisc);
+}
+
+static inline void netif_tx_schedule_all(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++)
+		netif_schedule_queue(netdev_get_tx_queue(dev, i));
+}
+
+static inline void netif_tx_start_queue(struct netdev_queue *dev_queue)
+{
+	clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
 }
 
 /**
@@ -970,7 +1008,29 @@ static inline void netif_schedule(struct net_device *dev)
  */
 static inline void netif_start_queue(struct net_device *dev)
 {
-	clear_bit(__LINK_STATE_XOFF, &dev->state);
+	netif_tx_start_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_start_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_start_queue(txq);
+	}
+}
+
+static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue)
+{
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap()) {
+		clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+		return;
+	}
+#endif
+	if (test_and_clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state))
+		__netif_schedule(dev_queue->qdisc);
 }
 
 /**
@@ -982,14 +1042,22 @@ static inline void netif_start_queue(struct net_device *dev)
  */
 static inline void netif_wake_queue(struct net_device *dev)
 {
-#ifdef CONFIG_NETPOLL_TRAP
-	if (netpoll_trap()) {
-		clear_bit(__LINK_STATE_XOFF, &dev->state);
-		return;
+	netif_tx_wake_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_wake_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_wake_queue(txq);
 	}
-#endif
-	if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state))
-		__netif_schedule(dev);
+}
+
+static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
+{
+	set_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
 }
 
 /**
@@ -1001,7 +1069,22 @@ static inline void netif_wake_queue(struct net_device *dev)
  */
 static inline void netif_stop_queue(struct net_device *dev)
 {
-	set_bit(__LINK_STATE_XOFF, &dev->state);
+	netif_tx_stop_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_stop_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_stop_queue(txq);
+	}
+}
+
+static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
 }
 
 /**
@@ -1012,7 +1095,12 @@ static inline void netif_stop_queue(struct net_device *dev)
  */
 static inline int netif_queue_stopped(const struct net_device *dev)
 {
-	return test_bit(__LINK_STATE_XOFF, &dev->state);
+	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
+}
+
+static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state);
 }
 
 /**
@@ -1042,9 +1130,8 @@ static inline int netif_running(const struct net_device *dev)
  */
 static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
-	clear_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
-#endif
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+	clear_bit(__QUEUE_STATE_XOFF, &txq->state);
 }
 
 /**
@@ -1056,13 +1143,12 @@ static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
  */
 static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
 #ifdef CONFIG_NETPOLL_TRAP
 	if (netpoll_trap())
 		return;
 #endif
-	set_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
-#endif
+	set_bit(__QUEUE_STATE_XOFF, &txq->state);
 }
 
 /**
@@ -1075,12 +1161,8 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
 static inline int __netif_subqueue_stopped(const struct net_device *dev,
 					 u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
-	return test_bit(__LINK_STATE_XOFF,
-			&dev->egress_subqueue[queue_index].state);
-#else
-	return 0;
-#endif
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+	return test_bit(__QUEUE_STATE_XOFF, &txq->state);
 }
 
 static inline int netif_subqueue_stopped(const struct net_device *dev,
@@ -1098,15 +1180,13 @@ static inline int netif_subqueue_stopped(const struct net_device *dev,
  */
 static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
 #ifdef CONFIG_NETPOLL_TRAP
 	if (netpoll_trap())
 		return;
 #endif
-	if (test_and_clear_bit(__LINK_STATE_XOFF,
-			       &dev->egress_subqueue[queue_index].state))
-		__netif_schedule(dev);
-#endif
+	if (test_and_clear_bit(__QUEUE_STATE_XOFF, &txq->state))
+		__netif_schedule(txq->qdisc);
 }
 
 /**
@@ -1114,15 +1194,10 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
  *	@dev: network device
  *
  * Check if device has multiple transmit queues
- * Always falls if NETDEVICE_MULTIQUEUE is not configured
  */
 static inline int netif_is_multiqueue(const struct net_device *dev)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
-	return (!!(NETIF_F_MULTI_QUEUE & dev->features));
-#else
-	return 0;
-#endif
+	return (dev->num_tx_queues > 1);
 }
 
 /* Use this variant when it is known for sure that it
@@ -1142,6 +1217,7 @@ extern int		netif_rx(struct sk_buff *skb);
 extern int		netif_rx_ni(struct sk_buff *skb);
 #define HAVE_NETIF_RECEIVE_SKB 1
 extern int		netif_receive_skb(struct sk_buff *skb);
+extern void		netif_nit_deliver(struct sk_buff *skb);
 extern int		dev_valid_name(const char *name);
 extern int		dev_ioctl(struct net *net, unsigned int cmd, void __user *);
 extern int		dev_ethtool(struct net *net, struct ifreq *);
@@ -1154,7 +1230,8 @@ extern int		dev_set_mtu(struct net_device *, int);
 extern int		dev_set_mac_address(struct net_device *,
 					    struct sockaddr *);
 extern int		dev_hard_start_xmit(struct sk_buff *skb,
-					    struct net_device *dev);
+					    struct net_device *dev,
+					    struct netdev_queue *txq);
 
 extern int		netdev_budget;
 
@@ -1390,6 +1467,38 @@ static inline void netif_rx_complete(struct net_device *dev,
 	local_irq_restore(flags);
 }
 
+static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
+{
+	spin_lock(&txq->_xmit_lock);
+	txq->xmit_lock_owner = cpu;
+}
+
+static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
+{
+	spin_lock_bh(&txq->_xmit_lock);
+	txq->xmit_lock_owner = smp_processor_id();
+}
+
+static inline int __netif_tx_trylock(struct netdev_queue *txq)
+{
+	int ok = spin_trylock(&txq->_xmit_lock);
+	if (likely(ok))
+		txq->xmit_lock_owner = smp_processor_id();
+	return ok;
+}
+
+static inline void __netif_tx_unlock(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock(&txq->_xmit_lock);
+}
+
+static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock_bh(&txq->_xmit_lock);
+}
+
 /**
  *	netif_tx_lock - grab network device transmit lock
  *	@dev: network device
@@ -1397,60 +1506,105 @@ static inline void netif_rx_complete(struct net_device *dev,
  *
  * Get network device transmit lock
  */
-static inline void __netif_tx_lock(struct net_device *dev, int cpu)
-{
-	spin_lock(&dev->_xmit_lock);
-	dev->xmit_lock_owner = cpu;
-}
-
 static inline void netif_tx_lock(struct net_device *dev)
 {
-	__netif_tx_lock(dev, smp_processor_id());
+	unsigned int i;
+	int cpu;
+
+	spin_lock(&dev->tx_global_lock);
+	cpu = smp_processor_id();
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* We are the only thread of execution doing a
+		 * freeze, but we have to grab the _xmit_lock in
+		 * order to synchronize with threads which are in
+		 * the ->hard_start_xmit() handler and already
+		 * checked the frozen bit.
+		 */
+		__netif_tx_lock(txq, cpu);
+		set_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		__netif_tx_unlock(txq);
+	}
 }
 
 static inline void netif_tx_lock_bh(struct net_device *dev)
 {
-	spin_lock_bh(&dev->_xmit_lock);
-	dev->xmit_lock_owner = smp_processor_id();
-}
-
-static inline int netif_tx_trylock(struct net_device *dev)
-{
-	int ok = spin_trylock(&dev->_xmit_lock);
-	if (likely(ok))
-		dev->xmit_lock_owner = smp_processor_id();
-	return ok;
+	local_bh_disable();
+	netif_tx_lock(dev);
 }
 
 static inline void netif_tx_unlock(struct net_device *dev)
 {
-	dev->xmit_lock_owner = -1;
-	spin_unlock(&dev->_xmit_lock);
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* No need to grab the _xmit_lock here.  If the
+		 * queue is not stopped for another reason, we
+		 * force a schedule.
+		 */
+		clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		if (!test_bit(__QUEUE_STATE_XOFF, &txq->state))
+			__netif_schedule(txq->qdisc);
+	}
+	spin_unlock(&dev->tx_global_lock);
 }
 
 static inline void netif_tx_unlock_bh(struct net_device *dev)
 {
-	dev->xmit_lock_owner = -1;
-	spin_unlock_bh(&dev->_xmit_lock);
+	netif_tx_unlock(dev);
+	local_bh_enable();
 }
 
-#define HARD_TX_LOCK(dev, cpu) {			\
+#define HARD_TX_LOCK(dev, txq, cpu) {			\
 	if ((dev->features & NETIF_F_LLTX) == 0) {	\
-		__netif_tx_lock(dev, cpu);			\
+		__netif_tx_lock(txq, cpu);		\
 	}						\
 }
 
-#define HARD_TX_UNLOCK(dev) {				\
+#define HARD_TX_UNLOCK(dev, txq) {			\
 	if ((dev->features & NETIF_F_LLTX) == 0) {	\
-		netif_tx_unlock(dev);			\
+		__netif_tx_unlock(txq);			\
 	}						\
 }
 
 static inline void netif_tx_disable(struct net_device *dev)
 {
-	netif_tx_lock_bh(dev);
-	netif_stop_queue(dev);
-	netif_tx_unlock_bh(dev);
+	unsigned int i;
+	int cpu;
+
+	local_bh_disable();
+	cpu = smp_processor_id();
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		__netif_tx_lock(txq, cpu);
+		netif_tx_stop_queue(txq);
+		__netif_tx_unlock(txq);
+	}
+	local_bh_enable();
+}
+
+static inline void netif_addr_lock(struct net_device *dev)
+{
+	spin_lock(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_lock_bh(struct net_device *dev)
+{
+	spin_lock_bh(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_unlock(struct net_device *dev)
+{
+	spin_unlock(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_unlock_bh(struct net_device *dev)
+{
+	spin_unlock_bh(&dev->addr_list_lock);
 }
 
 /* These functions live elsewhere (drivers/net/net_init.c, but related) */
@@ -1480,9 +1634,10 @@ extern int 		__dev_addr_delete(struct dev_addr_list **list, int *count, void *ad
 extern int		__dev_addr_add(struct dev_addr_list **list, int *count, void *addr, int alen, int newonly);
 extern int		__dev_addr_sync(struct dev_addr_list **to, int *to_count, struct dev_addr_list **from, int *from_count);
 extern void		__dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct dev_addr_list **from, int *from_count);
-extern void		dev_set_promiscuity(struct net_device *dev, int inc);
-extern void		dev_set_allmulti(struct net_device *dev, int inc);
+extern int		dev_set_promiscuity(struct net_device *dev, int inc);
+extern int		dev_set_allmulti(struct net_device *dev, int inc);
 extern void		netdev_state_change(struct net_device *dev);
+extern void		netdev_bonding_change(struct net_device *dev);
 extern void		netdev_features_change(struct net_device *dev);
 /* Load a device via the kmod */
 extern void		dev_load(struct net *net, const char *name);
@@ -1509,6 +1664,11 @@ extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
 extern void dev_seq_stop(struct seq_file *seq, void *v);
 #endif
 
+extern int netdev_class_create_file(struct class_attribute *class_attr);
+extern void netdev_class_remove_file(struct class_attribute *class_attr);
+
+extern char *netdev_drivername(struct net_device *dev, char *buffer, int len);
+
 extern void linkwatch_run_queue(void);
 
 extern int netdev_compute_features(unsigned long all, unsigned long one);
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
index bad1eb760f61..885cbe282260 100644
--- a/include/linux/netfilter/nf_conntrack_common.h
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -122,7 +122,7 @@ enum ip_conntrack_events
 	IPCT_NATINFO_BIT = 10,
 	IPCT_NATINFO = (1 << IPCT_NATINFO_BIT),
 
-	/* Counter highest bit has been set */
+	/* Counter highest bit has been set, unused */
 	IPCT_COUNTER_FILLING_BIT = 11,
 	IPCT_COUNTER_FILLING = (1 << IPCT_COUNTER_FILLING_BIT),
 
@@ -145,12 +145,6 @@ enum ip_conntrack_expect_events {
 };
 
 #ifdef __KERNEL__
-struct ip_conntrack_counter
-{
-	u_int32_t packets;
-	u_int32_t bytes;
-};
-
 struct ip_conntrack_stat
 {
 	unsigned int searched;
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index 22ce29995f13..a049df4f2236 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -30,6 +30,9 @@ enum tcp_conntrack {
 /* Be liberal in window checking */
 #define IP_CT_TCP_FLAG_BE_LIBERAL		0x08
 
+/* Has unacknowledged data */
+#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED	0x10
+
 struct nf_ct_tcp_flags {
 	u_int8_t flags;
 	u_int8_t mask;
diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h
index 0a383ac083cb..c19595c89304 100644
--- a/include/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/linux/netfilter/nfnetlink_conntrack.h
@@ -81,6 +81,7 @@ enum ctattr_protoinfo {
 	CTA_PROTOINFO_UNSPEC,
 	CTA_PROTOINFO_TCP,
 	CTA_PROTOINFO_DCCP,
+	CTA_PROTOINFO_SCTP,
 	__CTA_PROTOINFO_MAX
 };
 #define CTA_PROTOINFO_MAX (__CTA_PROTOINFO_MAX - 1)
@@ -103,12 +104,21 @@ enum ctattr_protoinfo_dccp {
 };
 #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1)
 
+enum ctattr_protoinfo_sctp {
+	CTA_PROTOINFO_SCTP_UNSPEC,
+	CTA_PROTOINFO_SCTP_STATE,
+	CTA_PROTOINFO_SCTP_VTAG_ORIGINAL,
+	CTA_PROTOINFO_SCTP_VTAG_REPLY,
+	__CTA_PROTOINFO_SCTP_MAX
+};
+#define CTA_PROTOINFO_SCTP_MAX (__CTA_PROTOINFO_SCTP_MAX - 1)
+
 enum ctattr_counters {
 	CTA_COUNTERS_UNSPEC,
-	CTA_COUNTERS_PACKETS,		/* old 64bit counters */
-	CTA_COUNTERS_BYTES,		/* old 64bit counters */
-	CTA_COUNTERS32_PACKETS,
-	CTA_COUNTERS32_BYTES,
+	CTA_COUNTERS_PACKETS,		/* 64bit counters */
+	CTA_COUNTERS_BYTES,		/* 64bit counters */
+	CTA_COUNTERS32_PACKETS,		/* old 32bit counters, unused */
+	CTA_COUNTERS32_BYTES,		/* old 32bit counters, unused */
 	__CTA_COUNTERS_MAX
 };
 #define CTA_COUNTERS_MAX (__CTA_COUNTERS_MAX - 1)
diff --git a/include/linux/netfilter/nfnetlink_log.h b/include/linux/netfilter/nfnetlink_log.h
index a85721332924..f661731f3cb1 100644
--- a/include/linux/netfilter/nfnetlink_log.h
+++ b/include/linux/netfilter/nfnetlink_log.h
@@ -48,6 +48,9 @@ enum nfulnl_attr_type {
 	NFULA_SEQ,			/* instance-local sequence number */
 	NFULA_SEQ_GLOBAL,		/* global sequence number */
 	NFULA_GID,			/* group id of socket */
+	NFULA_HWTYPE,			/* hardware type */
+	NFULA_HWHEADER,			/* hardware header */
+	NFULA_HWLEN,			/* hardware header length */
 
 	__NFULA_MAX
 };
diff --git a/include/linux/netfilter/xt_string.h b/include/linux/netfilter/xt_string.h
index bb21dd1aee2d..8a6ba7bbef9f 100644
--- a/include/linux/netfilter/xt_string.h
+++ b/include/linux/netfilter/xt_string.h
@@ -4,6 +4,11 @@
 #define XT_STRING_MAX_PATTERN_SIZE 128
 #define XT_STRING_MAX_ALGO_NAME_SIZE 16
 
+enum {
+	XT_STRING_FLAG_INVERT		= 0x01,
+	XT_STRING_FLAG_IGNORECASE	= 0x02
+};
+
 struct xt_string_info
 {
 	u_int16_t from_offset;
@@ -11,7 +16,15 @@ struct xt_string_info
 	char	  algo[XT_STRING_MAX_ALGO_NAME_SIZE];
 	char 	  pattern[XT_STRING_MAX_PATTERN_SIZE];
 	u_int8_t  patlen;
-	u_int8_t  invert;
+	union {
+		struct {
+			u_int8_t  invert;
+		} v0;
+
+		struct {
+			u_int8_t  flags;
+		} v1;
+	} u;
 
 	/* Used internally by the kernel */
 	struct ts_config __attribute__((aligned(8))) *config;
diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h
new file mode 100644
index 000000000000..2273c3ae33ca
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_ip6.h
@@ -0,0 +1,40 @@
+/*
+ *  ebt_ip6
+ *
+ *	Authors:
+ * Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
+ * Manohar Castelino <manohar.r.castelino@intel.com>
+ *
+ *  Jan 11, 2008
+ *
+ */
+
+#ifndef __LINUX_BRIDGE_EBT_IP6_H
+#define __LINUX_BRIDGE_EBT_IP6_H
+
+#define EBT_IP6_SOURCE 0x01
+#define EBT_IP6_DEST 0x02
+#define EBT_IP6_TCLASS 0x04
+#define EBT_IP6_PROTO 0x08
+#define EBT_IP6_SPORT 0x10
+#define EBT_IP6_DPORT 0x20
+#define EBT_IP6_MASK (EBT_IP6_SOURCE | EBT_IP6_DEST | EBT_IP6_TCLASS |\
+		      EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT)
+#define EBT_IP6_MATCH "ip6"
+
+/* the same values are used for the invflags */
+struct ebt_ip6_info
+{
+	struct in6_addr saddr;
+	struct in6_addr daddr;
+	struct in6_addr smsk;
+	struct in6_addr dmsk;
+	uint8_t  tclass;
+	uint8_t  protocol;
+	uint8_t  bitmask;
+	uint8_t  invflags;
+	uint16_t sport[2];
+	uint16_t dport[2];
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_log.h b/include/linux/netfilter_bridge/ebt_log.h
index 96e231ae7554..b76e653157e5 100644
--- a/include/linux/netfilter_bridge/ebt_log.h
+++ b/include/linux/netfilter_bridge/ebt_log.h
@@ -4,7 +4,8 @@
 #define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
 #define EBT_LOG_ARP 0x02
 #define EBT_LOG_NFLOG 0x04
-#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP)
+#define EBT_LOG_IP6 0x08
+#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP | EBT_LOG_IP6)
 #define EBT_LOG_PREFIX_SIZE 30
 #define EBT_LOG_WATCHER "log"
 
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index 650318b0c405..29c7727ff0e8 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -60,6 +60,7 @@ enum nf_ip_hook_priorities {
 	NF_IP_PRI_MANGLE = -150,
 	NF_IP_PRI_NAT_DST = -100,
 	NF_IP_PRI_FILTER = 0,
+	NF_IP_PRI_SECURITY = 50,
 	NF_IP_PRI_NAT_SRC = 100,
 	NF_IP_PRI_SELINUX_LAST = 225,
 	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 3475a65dae9b..d654873aa25a 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -64,11 +64,14 @@ enum nf_ip6_hook_priorities {
 	NF_IP6_PRI_MANGLE = -150,
 	NF_IP6_PRI_NAT_DST = -100,
 	NF_IP6_PRI_FILTER = 0,
+	NF_IP6_PRI_SECURITY = 50,
 	NF_IP6_PRI_NAT_SRC = 100,
 	NF_IP6_PRI_SELINUX_LAST = 225,
 	NF_IP6_PRI_LAST = INT_MAX,
 };
 
+#ifdef  __KERNEL__
+
 #ifdef CONFIG_NETFILTER
 extern int ip6_route_me_harder(struct sk_buff *skb);
 extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
@@ -81,4 +84,6 @@ static inline int ipv6_netfilter_init(void) { return 0; }
 static inline void ipv6_netfilter_fini(void) { return; }
 #endif /* CONFIG_NETFILTER */
 
+#endif /* __KERNEL__ */
+
 #endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index bec1062a25a1..9ff1b54908f3 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -193,7 +193,7 @@ extern int netlink_unregister_notifier(struct notifier_block *nb);
 
 /* finegrained unicast helpers: */
 struct sock *netlink_getsockbyfilp(struct file *filp);
-int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
+int netlink_attachskb(struct sock *sk, struct sk_buff *skb,
 		      long *timeo, struct sock *ssk);
 void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
 int netlink_sendskb(struct sock *sk, struct sk_buff *skb);
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index 8726491de154..ea0366769484 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -65,9 +65,6 @@
 #define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
 #define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
 #define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
-#define NFS4_ACE_OWNER                        0x00000080
-#define NFS4_ACE_GROUP                        0x00000100
-#define NFS4_ACE_EVERYONE                     0x00000200
 
 #define NFS4_ACE_READ_DATA                    0x00000001
 #define NFS4_ACE_LIST_DIRECTORY               0x00000001
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 29d261918734..78a5922a2f11 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -42,7 +42,6 @@
 #include <linux/in.h>
 #include <linux/kref.h>
 #include <linux/mm.h>
-#include <linux/namei.h>
 #include <linux/pagemap.h>
 #include <linux/rbtree.h>
 #include <linux/rwsem.h>
@@ -332,7 +331,7 @@ extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
 extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int nfs_permission(struct inode *, int, struct nameidata *);
+extern int nfs_permission(struct inode *, int);
 extern int nfs_open(struct inode *, struct file *);
 extern int nfs_release(struct inode *, struct file *);
 extern int nfs_attribute_timeout(struct inode *inode);
diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h
index 41d30c9c9de6..108f47e5fd95 100644
--- a/include/linux/nfsd/nfsd.h
+++ b/include/linux/nfsd/nfsd.h
@@ -12,7 +12,6 @@
 
 #include <linux/types.h>
 #include <linux/unistd.h>
-#include <linux/dirent.h>
 #include <linux/fs.h>
 #include <linux/posix_acl.h>
 #include <linux/mount.h>
@@ -28,20 +27,20 @@
 #define NFSD_SUPPORTED_MINOR_VERSION	0
 
 /*
- * Special flags for nfsd_permission. These must be different from MAY_READ,
- * MAY_WRITE, and MAY_EXEC.
+ * Flags for nfsd_permission
  */
-#define MAY_NOP			0
-#define MAY_SATTR		8
-#define MAY_TRUNC		16
-#define MAY_LOCK		32
-#define MAY_OWNER_OVERRIDE	64
-#define	MAY_LOCAL_ACCESS	128 /* IRIX doing local access check on device special file*/
-#if (MAY_SATTR | MAY_TRUNC | MAY_LOCK | MAY_OWNER_OVERRIDE | MAY_LOCAL_ACCESS) & (MAY_READ | MAY_WRITE | MAY_EXEC)
-# error "please use a different value for MAY_SATTR or MAY_TRUNC or MAY_LOCK or MAY_LOCAL_ACCESS or MAY_OWNER_OVERRIDE."
-#endif
-#define MAY_CREATE		(MAY_EXEC|MAY_WRITE)
-#define MAY_REMOVE		(MAY_EXEC|MAY_WRITE|MAY_TRUNC)
+#define NFSD_MAY_NOP		0
+#define NFSD_MAY_EXEC		1 /* == MAY_EXEC */
+#define NFSD_MAY_WRITE		2 /* == MAY_WRITE */
+#define NFSD_MAY_READ		4 /* == MAY_READ */
+#define NFSD_MAY_SATTR		8
+#define NFSD_MAY_TRUNC		16
+#define NFSD_MAY_LOCK		32
+#define NFSD_MAY_OWNER_OVERRIDE	64
+#define NFSD_MAY_LOCAL_ACCESS	128 /* IRIX doing local access check on device special file*/
+
+#define NFSD_MAY_CREATE		(NFSD_MAY_EXEC|NFSD_MAY_WRITE)
+#define NFSD_MAY_REMOVE		(NFSD_MAY_EXEC|NFSD_MAY_WRITE|NFSD_MAY_TRUNC)
 
 /*
  * Callback function for readdir
@@ -54,6 +53,7 @@ typedef int (*nfsd_dirop_t)(struct inode *, struct dentry *, int, int);
 extern struct svc_program	nfsd_program;
 extern struct svc_version	nfsd_version2, nfsd_version3,
 				nfsd_version4;
+extern struct mutex		nfsd_mutex;
 extern struct svc_serv		*nfsd_serv;
 
 extern struct seq_operations nfs_exports_op;
diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h
index db348f749376..d0fe2e378452 100644
--- a/include/linux/nfsd/state.h
+++ b/include/linux/nfsd/state.h
@@ -98,8 +98,6 @@ struct nfs4_callback {
 	u32                     cb_ident;
 	/* RPC client info */
 	atomic_t		cb_set;     /* successful CB_NULL call */
-	struct rpc_program      cb_program;
-	struct rpc_stat         cb_stat;
 	struct rpc_clnt *       cb_client;
 };
 
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index ea6517e58b04..2be7c63bc0f2 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -122,13 +122,13 @@ enum nl80211_commands {
 	NL80211_CMD_NEW_STATION,
 	NL80211_CMD_DEL_STATION,
 
-	/* add commands here */
-
 	NL80211_CMD_GET_MPATH,
 	NL80211_CMD_SET_MPATH,
 	NL80211_CMD_NEW_MPATH,
 	NL80211_CMD_DEL_MPATH,
 
+	/* add commands here */
+
 	/* used to define NL80211_CMD_MAX below */
 	__NL80211_CMD_AFTER_LAST,
 	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
@@ -230,18 +230,21 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MNTR_FLAGS,
 
-	/* add attributes here, update the policy in nl80211.c */
-
 	NL80211_ATTR_MESH_ID,
 	NL80211_ATTR_STA_PLINK_ACTION,
 	NL80211_ATTR_MPATH_NEXT_HOP,
 	NL80211_ATTR_MPATH_INFO,
 
+	/* add attributes here, update the policy in nl80211.c */
+
 	__NL80211_ATTR_AFTER_LAST,
 	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
 };
 
-#define NL80211_MAX_SUPP_RATES	32
+#define NL80211_MAX_SUPP_RATES			32
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
 
 /**
  * enum nl80211_iftype - (virtual) interface types
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 0ff6224d172a..da2698b0fdd1 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -197,6 +197,7 @@ static inline int notifier_to_errno(int ret)
 #define NETDEV_GOING_DOWN	0x0009
 #define NETDEV_CHANGENAME	0x000A
 #define NETDEV_FEAT_CHANGE	0x000B
+#define NETDEV_BONDING_FAILOVER 0x000C
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
@@ -213,6 +214,8 @@ static inline int notifier_to_errno(int ret)
 #define CPU_DEAD		0x0007 /* CPU (unsigned)v dead */
 #define CPU_DYING		0x0008 /* CPU (unsigned)v not running any task,
 				        * not handling interrupts, soon dead */
+#define CPU_POST_DEAD		0x0009 /* CPU (unsigned)v dead, cpu_hotplug
+					* lock is dropped */
 
 /* Used for CPU hotplug events occuring while tasks are frozen due to a suspend
  * operation in progress
diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h
index 0e66b57631fc..c8a768e59640 100644
--- a/include/linux/nsproxy.h
+++ b/include/linux/nsproxy.h
@@ -82,9 +82,12 @@ static inline void get_nsproxy(struct nsproxy *ns)
 }
 
 #ifdef CONFIG_CGROUP_NS
-int ns_cgroup_clone(struct task_struct *tsk);
+int ns_cgroup_clone(struct task_struct *tsk, struct pid *pid);
 #else
-static inline int ns_cgroup_clone(struct task_struct *tsk) { return 0; }
+static inline int ns_cgroup_clone(struct task_struct *tsk, struct pid *pid)
+{
+	return 0;
+}
 #endif
 
 #endif
diff --git a/include/linux/of.h b/include/linux/of.h
index 59a61bdc98b6..79886ade070f 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -70,5 +70,6 @@ extern int of_n_addr_cells(struct device_node *np);
 extern int of_n_size_cells(struct device_node *np);
 extern const struct of_device_id *of_match_node(
 	const struct of_device_id *matches, const struct device_node *node);
+extern int of_modalias_node(struct device_node *node, char *modalias, int len);
 
 #endif /* _LINUX_OF_H */
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index 2ee97e9877a7..67db101d0eb8 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -15,7 +15,7 @@
 #define __LINUX_OF_GPIO_H
 
 #include <linux/errno.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 #ifdef CONFIG_OF_GPIO
 
diff --git a/include/linux/of_spi.h b/include/linux/of_spi.h
new file mode 100644
index 000000000000..5f71ee8c0868
--- /dev/null
+++ b/include/linux/of_spi.h
@@ -0,0 +1,18 @@
+/*
+ * OpenFirmware SPI support routines
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * Support routines for deriving SPI device attachments from the device
+ * tree.
+ */
+
+#ifndef __LINUX_OF_SPI_H
+#define __LINUX_OF_SPI_H
+
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+
+extern void of_register_spi_devices(struct spi_master *master,
+				    struct device_node *np);
+
+#endif /* __LINUX_OF_SPI */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 0d2a4e7012aa..c74d3e875314 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -96,7 +96,22 @@ enum pageflags {
 #ifdef CONFIG_IA64_UNCACHED_ALLOCATOR
 	PG_uncached,		/* Page has been mapped as uncached */
 #endif
-	__NR_PAGEFLAGS
+	__NR_PAGEFLAGS,
+
+	/* Filesystems */
+	PG_checked = PG_owner_priv_1,
+
+	/* XEN */
+	PG_pinned = PG_owner_priv_1,
+	PG_savepinned = PG_dirty,
+
+	/* SLOB */
+	PG_slob_page = PG_active,
+	PG_slob_free = PG_private,
+
+	/* SLUB */
+	PG_slub_frozen = PG_active,
+	PG_slub_debug = PG_error,
 };
 
 #ifndef __GENERATING_BOUNDS_H
@@ -148,20 +163,26 @@ static inline int Page##uname(struct page *page) 			\
 
 struct page;	/* forward declaration */
 
-PAGEFLAG(Locked, locked) TESTSCFLAG(Locked, locked)
+TESTPAGEFLAG(Locked, locked)
 PAGEFLAG(Error, error)
 PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced)
 PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty)
 PAGEFLAG(LRU, lru) __CLEARPAGEFLAG(LRU, lru)
 PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active)
 __PAGEFLAG(Slab, slab)
-PAGEFLAG(Checked, owner_priv_1)		/* Used by some filesystems */
-PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */
-PAGEFLAG(SavePinned, dirty);					/* Xen */
+PAGEFLAG(Checked, checked)		/* Used by some filesystems */
+PAGEFLAG(Pinned, pinned) TESTSCFLAG(Pinned, pinned)	/* Xen */
+PAGEFLAG(SavePinned, savepinned);			/* Xen */
 PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved)
 PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private)
 	__SETPAGEFLAG(Private, private)
 
+__PAGEFLAG(SlobPage, slob_page)
+__PAGEFLAG(SlobFree, slob_free)
+
+__PAGEFLAG(SlubFrozen, slub_frozen)
+__PAGEFLAG(SlubDebug, slub_debug)
+
 /*
  * Only test-and-set exist for PG_writeback.  The unconditional operators are
  * risky: they bypass page accounting.
@@ -218,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page)
 {
 	smp_wmb();
 	__set_bit(PG_uptodate, &(page)->flags);
-#ifdef CONFIG_S390
-	page_clear_dirty(page);
-#endif
 }
 
 static inline void SetPageUptodate(struct page *page)
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index d2fca802f809..5da31c12101c 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -12,6 +12,7 @@
 #include <asm/uaccess.h>
 #include <linux/gfp.h>
 #include <linux/bitops.h>
+#include <linux/hardirq.h> /* for in_interrupt() */
 
 /*
  * Bits in mapping->flags.  The lower __GFP_BITS_SHIFT bits are the page
@@ -19,10 +20,11 @@
  */
 #define	AS_EIO		(__GFP_BITS_SHIFT + 0)	/* IO error on async write */
 #define AS_ENOSPC	(__GFP_BITS_SHIFT + 1)	/* ENOSPC on async write */
+#define AS_MM_ALL_LOCKS	(__GFP_BITS_SHIFT + 2)	/* under mm_take_all_locks() */
 
 static inline void mapping_set_error(struct address_space *mapping, int error)
 {
-	if (error) {
+	if (unlikely(error)) {
 		if (error == -ENOSPC)
 			set_bit(AS_ENOSPC, &mapping->flags);
 		else
@@ -62,6 +64,121 @@ static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask)
 #define page_cache_release(page)	put_page(page)
 void release_pages(struct page **pages, int nr, int cold);
 
+/*
+ * speculatively take a reference to a page.
+ * If the page is free (_count == 0), then _count is untouched, and 0
+ * is returned. Otherwise, _count is incremented by 1 and 1 is returned.
+ *
+ * This function must be called inside the same rcu_read_lock() section as has
+ * been used to lookup the page in the pagecache radix-tree (or page table):
+ * this allows allocators to use a synchronize_rcu() to stabilize _count.
+ *
+ * Unless an RCU grace period has passed, the count of all pages coming out
+ * of the allocator must be considered unstable. page_count may return higher
+ * than expected, and put_page must be able to do the right thing when the
+ * page has been finished with, no matter what it is subsequently allocated
+ * for (because put_page is what is used here to drop an invalid speculative
+ * reference).
+ *
+ * This is the interesting part of the lockless pagecache (and lockless
+ * get_user_pages) locking protocol, where the lookup-side (eg. find_get_page)
+ * has the following pattern:
+ * 1. find page in radix tree
+ * 2. conditionally increment refcount
+ * 3. check the page is still in pagecache (if no, goto 1)
+ *
+ * Remove-side that cares about stability of _count (eg. reclaim) has the
+ * following (with tree_lock held for write):
+ * A. atomically check refcount is correct and set it to 0 (atomic_cmpxchg)
+ * B. remove page from pagecache
+ * C. free the page
+ *
+ * There are 2 critical interleavings that matter:
+ * - 2 runs before A: in this case, A sees elevated refcount and bails out
+ * - A runs before 2: in this case, 2 sees zero refcount and retries;
+ *   subsequently, B will complete and 1 will find no page, causing the
+ *   lookup to return NULL.
+ *
+ * It is possible that between 1 and 2, the page is removed then the exact same
+ * page is inserted into the same position in pagecache. That's OK: the
+ * old find_get_page using tree_lock could equally have run before or after
+ * such a re-insertion, depending on order that locks are granted.
+ *
+ * Lookups racing against pagecache insertion isn't a big problem: either 1
+ * will find the page or it will not. Likewise, the old find_get_page could run
+ * either before the insertion or afterwards, depending on timing.
+ */
+static inline int page_cache_get_speculative(struct page *page)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+	VM_BUG_ON(!in_atomic());
+# endif
+	/*
+	 * Preempt must be disabled here - we rely on rcu_read_lock doing
+	 * this for us.
+	 *
+	 * Pagecache won't be truncated from interrupt context, so if we have
+	 * found a page in the radix tree here, we have pinned its refcount by
+	 * disabling preempt, and hence no need for the "speculative get" that
+	 * SMP requires.
+	 */
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_inc(&page->_count);
+
+#else
+	if (unlikely(!get_page_unless_zero(page))) {
+		/*
+		 * Either the page has been freed, or will be freed.
+		 * In either case, retry here and the caller should
+		 * do the right thing (see comments above).
+		 */
+		return 0;
+	}
+#endif
+	VM_BUG_ON(PageTail(page));
+
+	return 1;
+}
+
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+	VM_BUG_ON(!in_atomic());
+# endif
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(count, &page->_count);
+
+#else
+	if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+		return 0;
+#endif
+	VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+	return 1;
+}
+
+static inline int page_freeze_refs(struct page *page, int count)
+{
+	return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
+}
+
+static inline void page_unfreeze_refs(struct page *page, int count)
+{
+	VM_BUG_ON(page_count(page) != 0);
+	VM_BUG_ON(count == 0);
+
+	atomic_set(&page->_count, count);
+}
+
 #ifdef CONFIG_NUMA
 extern struct page *__page_cache_alloc(gfp_t gfp);
 #else
@@ -133,13 +250,6 @@ static inline struct page *read_mapping_page(struct address_space *mapping,
 	return read_cache_page(mapping, index, filler, data);
 }
 
-int add_to_page_cache(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-extern void remove_from_page_cache(struct page *page);
-extern void __remove_from_page_cache(struct page *page);
-
 /*
  * Return byte-offset into filesystem object for page.
  */
@@ -161,13 +271,28 @@ extern int __lock_page_killable(struct page *page);
 extern void __lock_page_nosync(struct page *page);
 extern void unlock_page(struct page *page);
 
+static inline void set_page_locked(struct page *page)
+{
+	set_bit(PG_locked, &page->flags);
+}
+
+static inline void clear_page_locked(struct page *page)
+{
+	clear_bit(PG_locked, &page->flags);
+}
+
+static inline int trylock_page(struct page *page)
+{
+	return !test_and_set_bit(PG_locked, &page->flags);
+}
+
 /*
  * lock_page may only be called if we have the page's inode pinned.
  */
 static inline void lock_page(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		__lock_page(page);
 }
 
@@ -179,7 +304,7 @@ static inline void lock_page(struct page *page)
 static inline int lock_page_killable(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		return __lock_page_killable(page);
 	return 0;
 }
@@ -191,7 +316,7 @@ static inline int lock_page_killable(struct page *page)
 static inline void lock_page_nosync(struct page *page)
 {
 	might_sleep();
-	if (TestSetPageLocked(page))
+	if (!trylock_page(page))
 		__lock_page_nosync(page);
 }
 	
@@ -276,4 +401,27 @@ static inline int fault_in_pages_readable(const char __user *uaddr, int size)
 	return ret;
 }
 
+int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+extern void remove_from_page_cache(struct page *page);
+extern void __remove_from_page_cache(struct page *page);
+
+/*
+ * Like add_to_page_cache_locked, but used to add newly allocated pages:
+ * the page is new, so we can just run set_page_locked() against it.
+ */
+static inline int add_to_page_cache(struct page *page,
+		struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask)
+{
+	int error;
+
+	set_page_locked(page);
+	error = add_to_page_cache_locked(page, mapping, offset, gfp_mask);
+	if (unlikely(error))
+		clear_page_locked(page);
+	return error;
+}
+
 #endif /* _LINUX_PAGEMAP_H */
diff --git a/include/linux/parport.h b/include/linux/parport.h
index dcb9e01a69ca..6a0d7cdb5774 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -560,5 +560,8 @@ extern int parport_device_proc_unregister(struct pardevice *device);
 
 #endif /*  !CONFIG_PARPORT_NOT_PC  */
 
+extern unsigned long parport_default_timeslice;
+extern int parport_default_spintime;
+
 #endif /* __KERNEL__ */
 #endif /* _PARPORT_H_ */
diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h
index a1a1e618e996..91ba0b338b47 100644
--- a/include/linux/pci-aspm.h
+++ b/include/linux/pci-aspm.h
@@ -27,6 +27,7 @@ extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
 extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
 extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
 extern void pci_disable_link_state(struct pci_dev *pdev, int state);
+extern void pcie_no_aspm(void);
 #else
 static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
 {
@@ -40,6 +41,10 @@ static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev)
 static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
 {
 }
+
+static inline void pcie_no_aspm(void)
+{
+}
 #endif
 
 #ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a6a088e1a804..825be3878f68 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -124,6 +124,8 @@ enum pci_dev_flags {
 	 * generation too.
 	 */
 	PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
+	/* Device configuration is irrevocably lost if disabled into D3 */
+	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 };
 
 typedef unsigned short __bitwise pci_bus_flags_t;
@@ -638,7 +640,9 @@ int pci_save_state(struct pci_dev *dev);
 int pci_restore_state(struct pci_dev *dev);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
+bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
 int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+pci_power_t pci_target_state(struct pci_dev *dev);
 int pci_prepare_to_sleep(struct pci_dev *dev);
 int pci_back_from_sleep(struct pci_dev *dev);
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 6be6a7943d8b..35a78415accc 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -748,6 +748,7 @@
 #define PCI_VENDOR_ID_TI		0x104c
 #define PCI_DEVICE_ID_TI_TVP4020	0x3d07
 #define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_TSB43AB22	0x8023
 #define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
 #define PCI_DEVICE_ID_TI_XX21_XX11_FM	0x8033
 #define PCI_DEVICE_ID_TI_XX21_XX11_SD	0x8034
@@ -1832,7 +1833,13 @@
 #define PCI_DEVICE_ID_MOXA_C320		0x3200
 
 #define PCI_VENDOR_ID_CCD		0x1397
+#define PCI_DEVICE_ID_CCD_HFC4S		0x08B4
+#define PCI_SUBDEVICE_ID_CCD_PMX2S	0x1234
+#define PCI_DEVICE_ID_CCD_HFC8S		0x16B8
 #define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
+#define PCI_DEVICE_ID_CCD_HFCE1		0x30B1
+#define PCI_SUBDEVICE_ID_CCD_SPD4S	0x3136
+#define PCI_SUBDEVICE_ID_CCD_SPDE1	0x3137
 #define PCI_DEVICE_ID_CCD_B000		0xb000
 #define PCI_DEVICE_ID_CCD_B006		0xb006
 #define PCI_DEVICE_ID_CCD_B007		0xb007
@@ -1842,8 +1849,32 @@
 #define PCI_DEVICE_ID_CCD_B00B		0xb00b
 #define PCI_DEVICE_ID_CCD_B00C		0xb00c
 #define PCI_DEVICE_ID_CCD_B100		0xb100
+#define PCI_SUBDEVICE_ID_CCD_IOB4ST	0xB520
+#define PCI_SUBDEVICE_ID_CCD_IOB8STR	0xB521
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST	0xB522
+#define PCI_SUBDEVICE_ID_CCD_IOB1E1	0xB523
+#define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
+#define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
+#define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
+#define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
+#define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
+#define PCI_SUBDEVICE_ID_CCD_BNE1D	0xB564
+#define PCI_SUBDEVICE_ID_CCD_BNE1DP	0xB565
+#define PCI_SUBDEVICE_ID_CCD_BN2S	0xB566
+#define PCI_SUBDEVICE_ID_CCD_BN1SM	0xB567
+#define PCI_SUBDEVICE_ID_CCD_BN4SM	0xB568
+#define PCI_SUBDEVICE_ID_CCD_BN2SM	0xB569
+#define PCI_SUBDEVICE_ID_CCD_BNE1M	0xB56A
+#define PCI_SUBDEVICE_ID_CCD_BN8SP	0xB56B
+#define PCI_SUBDEVICE_ID_CCD_HFC4S	0xB620
+#define PCI_SUBDEVICE_ID_CCD_HFC8S	0xB622
 #define PCI_DEVICE_ID_CCD_B700		0xb700
 #define PCI_DEVICE_ID_CCD_B701		0xb701
+#define PCI_SUBDEVICE_ID_CCD_HFCE1	0xC523
+#define PCI_SUBDEVICE_ID_CCD_OV2S	0xE884
+#define PCI_SUBDEVICE_ID_CCD_OV4S	0xE888
+#define PCI_SUBDEVICE_ID_CCD_OV8S	0xE998
 
 #define PCI_VENDOR_ID_EXAR		0x13a8
 #define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
@@ -1950,6 +1981,8 @@
 #define PCI_DEVICE_ID_NX2_5708		0x164c
 #define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
 #define PCI_DEVICE_ID_NX2_57710		0x164e
+#define PCI_DEVICE_ID_NX2_57711		0x164f
+#define PCI_DEVICE_ID_NX2_57711E	0x1650
 #define PCI_DEVICE_ID_TIGON3_5705	0x1653
 #define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
 #define PCI_DEVICE_ID_TIGON3_5720	0x1658
@@ -1982,6 +2015,7 @@
 #define PCI_DEVICE_ID_TIGON3_5787M	0x1693
 #define PCI_DEVICE_ID_TIGON3_5782	0x1696
 #define PCI_DEVICE_ID_TIGON3_5784	0x1698
+#define PCI_DEVICE_ID_TIGON3_5785	0x1699
 #define PCI_DEVICE_ID_TIGON3_5786	0x169a
 #define PCI_DEVICE_ID_TIGON3_5787	0x169b
 #define PCI_DEVICE_ID_TIGON3_5788	0x169c
@@ -2368,6 +2402,14 @@
 #define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
 #define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
 #define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG3	0x3433
 #define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
 #define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
 #define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
@@ -2389,6 +2431,9 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
+#define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
+#define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
+#define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
 #define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
 #define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
 #define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
@@ -2509,6 +2554,9 @@
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
 
+#define PCI_VENDOR_ID_DIGIUM		0xd161
+#define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410
+
 #define PCI_SUBVENDOR_ID_EXSYS		0xd84d
 #define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
 #define PCI_SUBDEVICE_ID_EXSYS_4055	0x4055
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 19958b929905..450684f7eaac 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -374,6 +374,7 @@
 #define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
 #define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
 #define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
 #define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
 #define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
 #define PCI_EXP_DEVCTL		8	/* Device Control */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 4cdd393e71e1..fac3337547eb 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -74,11 +74,6 @@ struct percpu_data {
         (__typeof__(ptr))__p->ptrs[(cpu)];	          \
 })
 
-extern void *percpu_populate(void *__pdata, size_t size, gfp_t gfp, int cpu);
-extern void percpu_depopulate(void *__pdata, int cpu);
-extern int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-				  cpumask_t *mask);
-extern void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask);
 extern void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask);
 extern void percpu_free(void *__pdata);
 
@@ -86,26 +81,6 @@ extern void percpu_free(void *__pdata);
 
 #define percpu_ptr(ptr, cpu) ({ (void)(cpu); (ptr); })
 
-static inline void percpu_depopulate(void *__pdata, int cpu)
-{
-}
-
-static inline void __percpu_depopulate_mask(void *__pdata, cpumask_t *mask)
-{
-}
-
-static inline void *percpu_populate(void *__pdata, size_t size, gfp_t gfp,
-				    int cpu)
-{
-	return percpu_ptr(__pdata, cpu);
-}
-
-static inline int __percpu_populate_mask(void *__pdata, size_t size, gfp_t gfp,
-					 cpumask_t *mask)
-{
-	return 0;
-}
-
 static __always_inline void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask)
 {
 	return kzalloc(size, gfp);
@@ -118,10 +93,6 @@ static inline void percpu_free(void *__pdata)
 
 #endif /* CONFIG_SMP */
 
-#define percpu_populate_mask(__pdata, size, gfp, mask) \
-	__percpu_populate_mask((__pdata), (size), (gfp), &(mask))
-#define percpu_depopulate_mask(__pdata, mask) \
-	__percpu_depopulate_mask((__pdata), &(mask))
 #define percpu_alloc_mask(size, gfp, mask) \
 	__percpu_alloc_mask((size), (gfp), &(mask))
 
diff --git a/include/linux/pid.h b/include/linux/pid.h
index c21c7e8124a7..22921ac4cfd9 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -48,7 +48,7 @@ enum pid_type
  */
 
 struct upid {
-	/* Try to keep pid_chain in the same cacheline as nr for find_pid */
+	/* Try to keep pid_chain in the same cacheline as nr for find_vpid */
 	int nr;
 	struct pid_namespace *ns;
 	struct hlist_node pid_chain;
@@ -57,10 +57,10 @@ struct upid {
 struct pid
 {
 	atomic_t count;
+	unsigned int level;
 	/* lists of tasks that use this pid */
 	struct hlist_head tasks[PIDTYPE_MAX];
 	struct rcu_head rcu;
-	unsigned int level;
 	struct upid numbers[1];
 };
 
@@ -105,14 +105,12 @@ extern struct pid_namespace init_pid_ns;
  * or rcu_read_lock() held.
  *
  * find_pid_ns() finds the pid in the namespace specified
- * find_pid() find the pid by its global id, i.e. in the init namespace
  * find_vpid() finr the pid by its virtual id, i.e. in the current namespace
  *
- * see also find_task_by_pid() set in include/linux/sched.h
+ * see also find_task_by_vpid() set in include/linux/sched.h
  */
 extern struct pid *find_pid_ns(int nr, struct pid_namespace *ns);
 extern struct pid *find_vpid(int nr);
-extern struct pid *find_pid(int nr);
 
 /*
  * Lookup a PID in the hash table, and return with it's count elevated.
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index caff5283d15c..1af82c4e17d4 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -14,6 +14,8 @@ struct pidmap {
 
 #define PIDMAP_ENTRIES         ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8)
 
+struct bsd_acct_struct;
+
 struct pid_namespace {
 	struct kref kref;
 	struct pidmap pidmap[PIDMAP_ENTRIES];
@@ -25,6 +27,9 @@ struct pid_namespace {
 #ifdef CONFIG_PROC_FS
 	struct vfsmount *proc_mnt;
 #endif
+#ifdef CONFIG_BSD_PROCESS_ACCT
+	struct bsd_acct_struct *bacct;
+#endif
 };
 
 extern struct pid_namespace init_pid_ns;
@@ -85,4 +90,7 @@ static inline struct task_struct *task_child_reaper(struct task_struct *tsk)
 	return tsk->nsproxy->pid_ns->child_reaper;
 }
 
+void pidhash_init(void);
+void pidmap_init(void);
+
 #endif /* _LINUX_PID_NS_H */
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
index 99efbed81fa2..7cf7824df778 100644
--- a/include/linux/pkt_cls.h
+++ b/include/linux/pkt_cls.h
@@ -374,6 +374,7 @@ enum
 	TCA_FLOW_ACT,
 	TCA_FLOW_POLICE,
 	TCA_FLOW_EMATCHES,
+	TCA_FLOW_PERTURB,
 	__TCA_FLOW_MAX
 };
 
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index dbb7ac37960d..e5de421ac7b4 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -85,6 +85,26 @@ struct tc_ratespec
 
 #define TC_RTAB_SIZE	1024
 
+struct tc_sizespec {
+	unsigned char	cell_log;
+	unsigned char	size_log;
+	short		cell_align;
+	int		overhead;
+	unsigned int	linklayer;
+	unsigned int	mpu;
+	unsigned int	mtu;
+	unsigned int	tsize;
+};
+
+enum {
+	TCA_STAB_UNSPEC,
+	TCA_STAB_BASE,
+	TCA_STAB_DATA,
+	__TCA_STAB_MAX
+};
+
+#define TCA_STAB_MAX (__TCA_STAB_MAX - 1)
+
 /* FIFO section */
 
 struct tc_fifo_qopt
@@ -103,15 +123,6 @@ struct tc_prio_qopt
 	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
 };
 
-enum
-{
-	TCA_PRIO_UNSPEC,
-	TCA_PRIO_MQ,
-	__TCA_PRIO_MAX
-};
-
-#define TCA_PRIO_MAX    (__TCA_PRIO_MAX - 1)
-
 /* TBF section */
 
 struct tc_tbf_qopt
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 4ad9de94449a..4dcce54b6d76 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -22,78 +22,6 @@
 #define _LINUX_PM_H
 
 #include <linux/list.h>
-#include <asm/atomic.h>
-#include <asm/errno.h>
-
-/*
- * Power management requests... these are passed to pm_send_all() and friends.
- *
- * these functions are old and deprecated, see below.
- */
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-
-/*
- * Device types... these are passed to pm_register
- */
-typedef int __bitwise pm_dev_t;
-
-#define PM_UNKNOWN_DEV	((__force pm_dev_t) 0)	/* generic */
-#define PM_SYS_DEV	((__force pm_dev_t) 1)	/* system device (fan, KB controller, ...) */
-#define PM_PCI_DEV	((__force pm_dev_t) 2)	/* PCI device */
-#define PM_USB_DEV	((__force pm_dev_t) 3)	/* USB device */
-#define PM_SCSI_DEV	((__force pm_dev_t) 4)	/* SCSI device */
-#define PM_ISA_DEV	((__force pm_dev_t) 5)	/* ISA device */
-#define	PM_MTD_DEV	((__force pm_dev_t) 6)	/* Memory Technology Device */
-
-/*
- * System device hardware ID (PnP) values
- */
-enum
-{
-	PM_SYS_UNKNOWN = 0x00000000, /* generic */
-	PM_SYS_KBC =	 0x41d00303, /* keyboard controller */
-	PM_SYS_COM =	 0x41d00500, /* serial port */
-	PM_SYS_IRDA =	 0x41d00510, /* IRDA controller */
-	PM_SYS_FDC =	 0x41d00700, /* floppy controller */
-	PM_SYS_VGA =	 0x41d00900, /* VGA controller */
-	PM_SYS_PCMCIA =	 0x41d00e00, /* PCMCIA controller */
-};
-
-/*
- * Device identifier
- */
-#define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
-
-/*
- * Request handler callback
- */
-struct pm_dev;
-
-typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
-
-/*
- * Dynamic device information
- */
-struct pm_dev
-{
-	pm_dev_t	 type;
-	unsigned long	 id;
-	pm_callback	 callback;
-	void		*data;
-
-	unsigned long	 flags;
-	unsigned long	 state;
-	unsigned long	 prev_state;
-
-	struct list_head entry;
-};
-
-/* Functions above this comment are list-based old-style power
- * management. Please avoid using them.  */
 
 /*
  * Callbacks for platform drivers to implement.
@@ -317,6 +245,21 @@ struct pm_ext_ops {
  * RECOVER	Creation of a hibernation image or restoration of the main
  *		memory contents from a hibernation image has failed, call
  *		->thaw() and ->complete() for all devices.
+ *
+ * The following PM_EVENT_ messages are defined for internal use by
+ * kernel subsystems.  They are never issued by the PM core.
+ *
+ * USER_SUSPEND		Manual selective suspend was issued by userspace.
+ *
+ * USER_RESUME		Manual selective resume was issued by userspace.
+ *
+ * REMOTE_WAKEUP	Remote-wakeup request was received from the device.
+ *
+ * AUTO_SUSPEND		Automatic (device idle) runtime suspend was
+ *			initiated by the subsystem.
+ *
+ * AUTO_RESUME		Automatic (device needed) runtime resume was
+ *			requested by a driver.
  */
 
 #define PM_EVENT_ON		0x0000
@@ -328,9 +271,18 @@ struct pm_ext_ops {
 #define PM_EVENT_THAW		0x0020
 #define PM_EVENT_RESTORE	0x0040
 #define PM_EVENT_RECOVER	0x0080
+#define PM_EVENT_USER		0x0100
+#define PM_EVENT_REMOTE		0x0200
+#define PM_EVENT_AUTO		0x0400
 
-#define PM_EVENT_SLEEP	(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+#define PM_EVENT_SLEEP		(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+#define PM_EVENT_USER_SUSPEND	(PM_EVENT_USER | PM_EVENT_SUSPEND)
+#define PM_EVENT_USER_RESUME	(PM_EVENT_USER | PM_EVENT_RESUME)
+#define PM_EVENT_REMOTE_WAKEUP	(PM_EVENT_REMOTE | PM_EVENT_RESUME)
+#define PM_EVENT_AUTO_SUSPEND	(PM_EVENT_AUTO | PM_EVENT_SUSPEND)
+#define PM_EVENT_AUTO_RESUME	(PM_EVENT_AUTO | PM_EVENT_RESUME)
 
+#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
 #define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
 #define PMSG_QUIESCE	((struct pm_message){ .event = PM_EVENT_QUIESCE, })
 #define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
@@ -339,7 +291,16 @@ struct pm_ext_ops {
 #define PMSG_THAW	((struct pm_message){ .event = PM_EVENT_THAW, })
 #define PMSG_RESTORE	((struct pm_message){ .event = PM_EVENT_RESTORE, })
 #define PMSG_RECOVER	((struct pm_message){ .event = PM_EVENT_RECOVER, })
-#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
+#define PMSG_USER_SUSPEND	((struct pm_messge) \
+					{ .event = PM_EVENT_USER_SUSPEND, })
+#define PMSG_USER_RESUME	((struct pm_messge) \
+					{ .event = PM_EVENT_USER_RESUME, })
+#define PMSG_REMOTE_RESUME	((struct pm_messge) \
+					{ .event = PM_EVENT_REMOTE_RESUME, })
+#define PMSG_AUTO_SUSPEND	((struct pm_messge) \
+					{ .event = PM_EVENT_AUTO_SUSPEND, })
+#define PMSG_AUTO_RESUME		((struct pm_messge) \
+					{ .event = PM_EVENT_AUTO_RESUME, })
 
 /**
  * Device power management states
diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h
deleted file mode 100644
index 446f4f42b952..000000000000
--- a/include/linux/pm_legacy.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef __LINUX_PM_LEGACY_H__
-#define __LINUX_PM_LEGACY_H__
-
-
-#ifdef CONFIG_PM_LEGACY
-
-/*
- * Register a device with power management
- */
-struct pm_dev __deprecated *
-pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
-
-/*
- * Send a request to all devices
- */
-int __deprecated pm_send_all(pm_request_t rqst, void *data);
-
-#else /* CONFIG_PM_LEGACY */
-
-static inline struct pm_dev *pm_register(pm_dev_t type,
-					 unsigned long id,
-					 pm_callback callback)
-{
-	return NULL;
-}
-
-static inline int pm_send_all(pm_request_t rqst, void *data)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PM_LEGACY */
-
-#endif /* __LINUX_PM_LEGACY_H__ */
-
diff --git a/include/linux/pm_qos_params.h b/include/linux/pm_qos_params.h
index 2e4e97bd19f7..d74f75ed1e47 100644
--- a/include/linux/pm_qos_params.h
+++ b/include/linux/pm_qos_params.h
@@ -1,6 +1,6 @@
 /* interface for the pm_qos_power infrastructure of the linux kernel.
  *
- * Mark Gross
+ * Mark Gross <mgross@linux.intel.com>
  */
 #include <linux/list.h>
 #include <linux/notifier.h>
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 68ed19ccf1f7..ea96ead1d39d 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -78,6 +78,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_CHARGE_EMPTY,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
index e86a7a5cf355..b8d4ddd22736 100644
--- a/include/linux/ppp-comp.h
+++ b/include/linux/ppp-comp.h
@@ -23,8 +23,6 @@
  * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
  * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
  * OR MODIFICATIONS.
- *
- * $Id: ppp-comp.h,v 1.6 1997/11/27 06:04:44 paulus Exp $
  */
 
 /*
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
index c6b13ff85028..6e8adc77522c 100644
--- a/include/linux/ppp_defs.h
+++ b/include/linux/ppp_defs.h
@@ -1,5 +1,3 @@
-/*	$Id: ppp_defs.h,v 1.2 1994/09/21 01:31:06 paulus Exp $	*/
-
 /*
  * ppp_defs.h - PPP definitions.
  *
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index fff1d27ddb4c..fb61850d1cfc 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -79,6 +79,7 @@ struct proc_dir_entry {
 	int pde_users;	/* number of callers into module in progress */
 	spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
 	struct completion *pde_unload_completion;
+	struct list_head pde_openers;	/* who did ->open, but not ->release */
 };
 
 struct kcore_list {
@@ -138,7 +139,6 @@ extern int proc_readdir(struct file *, void *, filldir_t);
 extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *);
 
 extern const struct file_operations proc_kcore_operations;
-extern const struct file_operations proc_kmsg_operations;
 extern const struct file_operations ppc_htab_operations;
 
 extern int pid_ns_prepare_proc(struct pid_namespace *ns);
@@ -282,11 +282,16 @@ union proc_op {
 		struct task_struct *task);
 };
 
+struct ctl_table_header;
+struct ctl_table;
+
 struct proc_inode {
 	struct pid *pid;
 	int fd;
 	union proc_op op;
 	struct proc_dir_entry *pde;
+	struct ctl_table_header *sysctl;
+	struct ctl_table *sysctl_entry;
 	struct inode vfs_inode;
 };
 
@@ -305,8 +310,6 @@ static inline struct net *PDE_NET(struct proc_dir_entry *pde)
 	return pde->parent->data;
 }
 
-struct net *get_proc_net(const struct inode *inode);
-
 struct proc_maps_private {
 	struct pid *pid;
 	struct task_struct *task;
diff --git a/include/linux/profile.h b/include/linux/profile.h
index 05c1cc736937..7e7087239af5 100644
--- a/include/linux/profile.h
+++ b/include/linux/profile.h
@@ -8,8 +8,6 @@
 
 #include <asm/errno.h>
 
-extern int prof_on __read_mostly;
-
 #define CPU_PROFILING	1
 #define SCHED_PROFILING	2
 #define SLEEP_PROFILING	3
@@ -19,14 +17,31 @@ struct proc_dir_entry;
 struct pt_regs;
 struct notifier_block;
 
+#if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS)
+void create_prof_cpu_mask(struct proc_dir_entry *de);
+#else
+static inline void create_prof_cpu_mask(struct proc_dir_entry *de)
+{
+}
+#endif
+
+enum profile_type {
+	PROFILE_TASK_EXIT,
+	PROFILE_MUNMAP
+};
+
+#ifdef CONFIG_PROFILING
+
+extern int prof_on __read_mostly;
+
 /* init basic kernel profiler */
 void __init profile_init(void);
-void profile_tick(int);
+void profile_tick(int type);
 
 /*
  * Add multiple profiler hits to a given address:
  */
-void profile_hits(int, void *ip, unsigned int nr_hits);
+void profile_hits(int type, void *ip, unsigned int nr_hits);
 
 /*
  * Single profiler hit:
@@ -40,19 +55,6 @@ static inline void profile_hit(int type, void *ip)
 		profile_hits(type, ip, 1);
 }
 
-#ifdef CONFIG_PROC_FS
-void create_prof_cpu_mask(struct proc_dir_entry *);
-#else
-#define create_prof_cpu_mask(x)			do { (void)(x); } while (0)
-#endif
-
-enum profile_type {
-	PROFILE_TASK_EXIT,
-	PROFILE_MUNMAP
-};
-
-#ifdef CONFIG_PROFILING
-
 struct task_struct;
 struct mm_struct;
 
@@ -80,6 +82,28 @@ struct pt_regs;
 
 #else
 
+#define prof_on 0
+
+static inline void profile_init(void)
+{
+	return;
+}
+
+static inline void profile_tick(int type)
+{
+	return;
+}
+
+static inline void profile_hits(int type, void *ip, unsigned int nr_hits)
+{
+	return;
+}
+
+static inline void profile_hit(int type, void *ip)
+{
+	return;
+}
+
 static inline int task_handoff_register(struct notifier_block * n)
 {
 	return -ENOSYS;
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index c6f5f9dd0cee..ea7416c901d1 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -121,6 +121,74 @@ static inline void ptrace_unlink(struct task_struct *child)
 int generic_ptrace_peekdata(struct task_struct *tsk, long addr, long data);
 int generic_ptrace_pokedata(struct task_struct *tsk, long addr, long data);
 
+/**
+ * task_ptrace - return %PT_* flags that apply to a task
+ * @task:	pointer to &task_struct in question
+ *
+ * Returns the %PT_* flags that apply to @task.
+ */
+static inline int task_ptrace(struct task_struct *task)
+{
+	return task->ptrace;
+}
+
+/**
+ * ptrace_event - possibly stop for a ptrace event notification
+ * @mask:	%PT_* bit to check in @current->ptrace
+ * @event:	%PTRACE_EVENT_* value to report if @mask is set
+ * @message:	value for %PTRACE_GETEVENTMSG to return
+ *
+ * This checks the @mask bit to see if ptrace wants stops for this event.
+ * If so we stop, reporting @event and @message to the ptrace parent.
+ *
+ * Returns nonzero if we did a ptrace notification, zero if not.
+ *
+ * Called without locks.
+ */
+static inline int ptrace_event(int mask, int event, unsigned long message)
+{
+	if (mask && likely(!(current->ptrace & mask)))
+		return 0;
+	current->ptrace_message = message;
+	ptrace_notify((event << 8) | SIGTRAP);
+	return 1;
+}
+
+/**
+ * ptrace_init_task - initialize ptrace state for a new child
+ * @child:		new child task
+ * @ptrace:		true if child should be ptrace'd by parent's tracer
+ *
+ * This is called immediately after adding @child to its parent's children
+ * list.  @ptrace is false in the normal case, and true to ptrace @child.
+ *
+ * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
+ */
+static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
+{
+	INIT_LIST_HEAD(&child->ptrace_entry);
+	INIT_LIST_HEAD(&child->ptraced);
+	child->parent = child->real_parent;
+	child->ptrace = 0;
+	if (unlikely(ptrace)) {
+		child->ptrace = current->ptrace;
+		ptrace_link(child, current->parent);
+	}
+}
+
+/**
+ * ptrace_release_task - final ptrace-related cleanup of a zombie being reaped
+ * @task:	task in %EXIT_DEAD state
+ *
+ * Called with write_lock(&tasklist_lock) held.
+ */
+static inline void ptrace_release_task(struct task_struct *task)
+{
+	BUG_ON(!list_empty(&task->ptraced));
+	ptrace_unlink(task);
+	BUG_ON(!list_empty(&task->ptrace_entry));
+}
+
 #ifndef force_successful_syscall_return
 /*
  * System call handlers that, upon successful completion, need to return a
@@ -246,6 +314,10 @@ static inline void user_enable_block_step(struct task_struct *task)
 #define arch_ptrace_stop(code, info)		do { } while (0)
 #endif
 
+extern int task_current_syscall(struct task_struct *target, long *callno,
+				unsigned long args[6], unsigned int maxargs,
+				unsigned long *sp, unsigned long *pc);
+
 #endif
 
 #endif
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcddfb200947..376a05048bc5 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -41,9 +41,6 @@
 #define __DQUOT_VERSION__	"dquot_6.5.1"
 #define __DQUOT_NUM_VERSION__	6*10000+5*100+1
 
-typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
-typedef __u64 qsize_t;          /* Type in which we store sizes */
-
 /* Size of blocks in which are counted size limits */
 #define QUOTABLOCK_BITS 10
 #define QUOTABLOCK_SIZE (1 << QUOTABLOCK_BITS)
@@ -138,6 +135,10 @@ struct if_dqinfo {
 #define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
 #define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
 #define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
 
 enum {
 	QUOTA_NL_C_UNSPEC,
@@ -172,6 +173,9 @@ enum {
 
 #include <asm/atomic.h>
 
+typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
+typedef __u64 qsize_t;          /* Type in which we store sizes */
+
 extern spinlock_t dq_data_lock;
 
 /* Maximal numbers of writes for quota operation (insert/delete/update)
@@ -223,12 +227,10 @@ struct super_block;
 #define DQF_INFO_DIRTY (1 << DQF_INFO_DIRTY_B)	/* Is info dirty? */
 
 extern void mark_info_dirty(struct super_block *sb, int type);
-#define info_dirty(info) test_bit(DQF_INFO_DIRTY_B, &(info)->dqi_flags)
-#define info_any_dquot_dirty(info) (!list_empty(&(info)->dqi_dirty_list))
-#define info_any_dirty(info) (info_dirty(info) || info_any_dquot_dirty(info))
-
-#define sb_dqopt(sb) (&(sb)->s_dquot)
-#define sb_dqinfo(sb, type) (sb_dqopt(sb)->info+(type))
+static inline int info_dirty(struct mem_dqinfo *info)
+{
+	return test_bit(DQF_INFO_DIRTY_B, &info->dqi_flags);
+}
 
 struct dqstats {
 	int lookups;
@@ -337,19 +339,6 @@ struct quota_info {
 	struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
 };
 
-#define sb_has_quota_enabled(sb, type) ((type)==USRQUOTA ? \
-	(sb_dqopt(sb)->flags & DQUOT_USR_ENABLED) : (sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED))
-
-#define sb_any_quota_enabled(sb) (sb_has_quota_enabled(sb, USRQUOTA) | \
-				  sb_has_quota_enabled(sb, GRPQUOTA))
-
-#define sb_has_quota_suspended(sb, type) \
-	((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \
-			      (sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED))
-
-#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \
-				  sb_has_quota_suspended(sb, GRPQUOTA))
-
 int register_quota_format(struct quota_format_type *fmt);
 void unregister_quota_format(struct quota_format_type *fmt);
 
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index f86702053853..ca6b9b5c8d52 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -11,42 +11,87 @@
 #define _LINUX_QUOTAOPS_
 
 #include <linux/smp_lock.h>
-
 #include <linux/fs.h>
 
+static inline struct quota_info *sb_dqopt(struct super_block *sb)
+{
+	return &sb->s_dquot;
+}
+
 #if defined(CONFIG_QUOTA)
 
 /*
  * declaration of quota_function calls in kernel.
  */
-extern void sync_dquots(struct super_block *sb, int type);
-
-extern int dquot_initialize(struct inode *inode, int type);
-extern int dquot_drop(struct inode *inode);
-
-extern int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
-extern int dquot_alloc_inode(const struct inode *inode, unsigned long number);
-
-extern int dquot_free_space(struct inode *inode, qsize_t number);
-extern int dquot_free_inode(const struct inode *inode, unsigned long number);
-
-extern int dquot_transfer(struct inode *inode, struct iattr *iattr);
-extern int dquot_commit(struct dquot *dquot);
-extern int dquot_acquire(struct dquot *dquot);
-extern int dquot_release(struct dquot *dquot);
-extern int dquot_commit_info(struct super_block *sb, int type);
-extern int dquot_mark_dquot_dirty(struct dquot *dquot);
-
-extern int vfs_quota_on(struct super_block *sb, int type, int format_id,
-		char *path, int remount);
-extern int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
-		int format_id, int type);
-extern int vfs_quota_off(struct super_block *sb, int type, int remount);
-extern int vfs_quota_sync(struct super_block *sb, int type);
-extern int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-extern int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-extern int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
-extern int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+void sync_dquots(struct super_block *sb, int type);
+
+int dquot_initialize(struct inode *inode, int type);
+int dquot_drop(struct inode *inode);
+
+int dquot_alloc_space(struct inode *inode, qsize_t number, int prealloc);
+int dquot_alloc_inode(const struct inode *inode, unsigned long number);
+
+int dquot_free_space(struct inode *inode, qsize_t number);
+int dquot_free_inode(const struct inode *inode, unsigned long number);
+
+int dquot_transfer(struct inode *inode, struct iattr *iattr);
+int dquot_commit(struct dquot *dquot);
+int dquot_acquire(struct dquot *dquot);
+int dquot_release(struct dquot *dquot);
+int dquot_commit_info(struct super_block *sb, int type);
+int dquot_mark_dquot_dirty(struct dquot *dquot);
+
+int vfs_quota_on(struct super_block *sb, int type, int format_id,
+ 	char *path, int remount);
+int vfs_quota_on_path(struct super_block *sb, int type, int format_id,
+ 	struct path *path);
+int vfs_quota_on_mount(struct super_block *sb, char *qf_name,
+ 	int format_id, int type);
+int vfs_quota_off(struct super_block *sb, int type, int remount);
+int vfs_quota_sync(struct super_block *sb, int type);
+int vfs_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int vfs_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *di);
+
+void vfs_dq_drop(struct inode *inode);
+int vfs_dq_transfer(struct inode *inode, struct iattr *iattr);
+int vfs_dq_quota_on_remount(struct super_block *sb);
+
+static inline struct mem_dqinfo *sb_dqinfo(struct super_block *sb, int type)
+{
+	return sb_dqopt(sb)->info + type;
+}
+
+/*
+ * Functions for checking status of quota
+ */
+
+static inline int sb_has_quota_enabled(struct super_block *sb, int type)
+{
+	if (type == USRQUOTA)
+		return sb_dqopt(sb)->flags & DQUOT_USR_ENABLED;
+	return sb_dqopt(sb)->flags & DQUOT_GRP_ENABLED;
+}
+
+static inline int sb_any_quota_enabled(struct super_block *sb)
+{
+	return sb_has_quota_enabled(sb, USRQUOTA) ||
+		sb_has_quota_enabled(sb, GRPQUOTA);
+}
+
+static inline int sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	if (type == USRQUOTA)
+		return sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED;
+	return sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED;
+}
+
+static inline int sb_any_quota_suspended(struct super_block *sb)
+{
+	return sb_has_quota_suspended(sb, USRQUOTA) ||
+		sb_has_quota_suspended(sb, GRPQUOTA);
+}
 
 /*
  * Operations supported for diskquotas.
@@ -59,38 +104,16 @@ extern struct quotactl_ops vfs_quotactl_ops;
 
 /* It is better to call this function outside of any transaction as it might
  * need a lot of space in journal for dquot structure allocation. */
-static inline void DQUOT_INIT(struct inode *inode)
+static inline void vfs_dq_init(struct inode *inode)
 {
 	BUG_ON(!inode->i_sb);
 	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode))
 		inode->i_sb->dq_op->initialize(inode, -1);
 }
 
-/* The same as with DQUOT_INIT */
-static inline void DQUOT_DROP(struct inode *inode)
-{
-	/* Here we can get arbitrary inode from clear_inode() so we have
-	 * to be careful. OTOH we don't need locking as quota operations
-	 * are allowed to change only at mount time */
-	if (!IS_NOQUOTA(inode) && inode->i_sb && inode->i_sb->dq_op
-	    && inode->i_sb->dq_op->drop) {
-		int cnt;
-		/* Test before calling to rule out calls from proc and such
-                 * where we are not allowed to block. Note that this is
-		 * actually reliable test even without the lock - the caller
-		 * must assure that nobody can come after the DQUOT_DROP and
-		 * add quota pointers back anyway */
-		for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-			if (inode->i_dquot[cnt] != NODQUOT)
-				break;
-		if (cnt < MAXQUOTAS)
-			inode->i_sb->dq_op->drop(inode);
-	}
-}
-
 /* The following allocation/freeing/transfer functions *must* be called inside
  * a transaction (deadlocks possible otherwise) */
-static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
 		/* Used space is updated in alloc_space() */
@@ -102,15 +125,15 @@ static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space(struct inode *inode, qsize_t nr)
 {
 	int ret;
-        if (!(ret =  DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr)))
+        if (!(ret =  vfs_dq_prealloc_space_nodirty(inode, nr)))
 		mark_inode_dirty(inode);
 	return ret;
 }
 
-static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
 		/* Used space is updated in alloc_space() */
@@ -122,25 +145,25 @@ static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space(struct inode *inode, qsize_t nr)
 {
 	int ret;
-	if (!(ret = DQUOT_ALLOC_SPACE_NODIRTY(inode, nr)))
+	if (!(ret = vfs_dq_alloc_space_nodirty(inode, nr)))
 		mark_inode_dirty(inode);
 	return ret;
 }
 
-static inline int DQUOT_ALLOC_INODE(struct inode *inode)
+static inline int vfs_dq_alloc_inode(struct inode *inode)
 {
 	if (sb_any_quota_enabled(inode->i_sb)) {
-		DQUOT_INIT(inode);
+		vfs_dq_init(inode);
 		if (inode->i_sb->dq_op->alloc_inode(inode, 1) == NO_QUOTA)
 			return 1;
 	}
 	return 0;
 }
 
-static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	if (sb_any_quota_enabled(inode->i_sb))
 		inode->i_sb->dq_op->free_space(inode, nr);
@@ -148,35 +171,25 @@ static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
 		inode_sub_bytes(inode, nr);
 }
 
-static inline void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	vfs_dq_free_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 }
 
-static inline void DQUOT_FREE_INODE(struct inode *inode)
+static inline void vfs_dq_free_inode(struct inode *inode)
 {
 	if (sb_any_quota_enabled(inode->i_sb))
 		inode->i_sb->dq_op->free_inode(inode, 1);
 }
 
-static inline int DQUOT_TRANSFER(struct inode *inode, struct iattr *iattr)
-{
-	if (sb_any_quota_enabled(inode->i_sb) && !IS_NOQUOTA(inode)) {
-		DQUOT_INIT(inode);
-		if (inode->i_sb->dq_op->transfer(inode, iattr) == NO_QUOTA)
-			return 1;
-	}
-	return 0;
-}
-
 /* The following two functions cannot be called inside a transaction */
-static inline void DQUOT_SYNC(struct super_block *sb)
+static inline void vfs_dq_sync(struct super_block *sb)
 {
 	sync_dquots(sb, -1);
 }
 
-static inline int DQUOT_OFF(struct super_block *sb, int remount)
+static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	int ret = -ENOSYS;
 
@@ -185,22 +198,27 @@ static inline int DQUOT_OFF(struct super_block *sb, int remount)
 	return ret;
 }
 
-static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
+#else
+
+static inline int sb_has_quota_enabled(struct super_block *sb, int type)
 {
-	int cnt;
-	int ret = 0, err;
+	return 0;
+}
 
-	if (!sb->s_qcop || !sb->s_qcop->quota_on)
-		return -ENOSYS;
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		err = sb->s_qcop->quota_on(sb, cnt, 0, NULL, 1);
-		if (err < 0 && !ret)
-			ret = err;
-	}
-	return ret;
+static inline int sb_any_quota_enabled(struct super_block *sb)
+{
+	return 0;
 }
 
-#else
+static inline int sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_any_quota_suspended(struct super_block *sb)
+{
+	return 0;
+}
 
 /*
  * NO-OP when quota not configured.
@@ -208,113 +226,144 @@ static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
 #define sb_dquot_ops				(NULL)
 #define sb_quotactl_ops				(NULL)
 
-static inline void DQUOT_INIT(struct inode *inode)
+static inline void vfs_dq_init(struct inode *inode)
 {
 }
 
-static inline void DQUOT_DROP(struct inode *inode)
+static inline void vfs_dq_drop(struct inode *inode)
 {
 }
 
-static inline int DQUOT_ALLOC_INODE(struct inode *inode)
+static inline int vfs_dq_alloc_inode(struct inode *inode)
 {
 	return 0;
 }
 
-static inline void DQUOT_FREE_INODE(struct inode *inode)
+static inline void vfs_dq_free_inode(struct inode *inode)
 {
 }
 
-static inline void DQUOT_SYNC(struct super_block *sb)
+static inline void vfs_dq_sync(struct super_block *sb)
 {
 }
 
-static inline int DQUOT_OFF(struct super_block *sb, int remount)
+static inline int vfs_dq_off(struct super_block *sb, int remount)
 {
 	return 0;
 }
 
-static inline int DQUOT_ON_REMOUNT(struct super_block *sb)
+static inline int vfs_dq_quota_on_remount(struct super_block *sb)
 {
 	return 0;
 }
 
-static inline int DQUOT_TRANSFER(struct inode *inode, struct iattr *iattr)
+static inline int vfs_dq_transfer(struct inode *inode, struct iattr *iattr)
 {
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_add_bytes(inode, nr);
 	return 0;
 }
 
-static inline int DQUOT_PREALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr);
+	vfs_dq_prealloc_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_add_bytes(inode, nr);
 	return 0;
 }
 
-static inline int DQUOT_ALLOC_SPACE(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_ALLOC_SPACE_NODIRTY(inode, nr);
+	vfs_dq_alloc_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 	return 0;
 }
 
-static inline void DQUOT_FREE_SPACE_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space_nodirty(struct inode *inode, qsize_t nr)
 {
 	inode_sub_bytes(inode, nr);
 }
 
-static inline void DQUOT_FREE_SPACE(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_space(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr);
+	vfs_dq_free_space_nodirty(inode, nr);
 	mark_inode_dirty(inode);
 }	
 
 #endif /* CONFIG_QUOTA */
 
-static inline int DQUOT_PREALLOC_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_PREALLOC_SPACE_NODIRTY(inode,
+	return vfs_dq_prealloc_space_nodirty(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_PREALLOC_BLOCK(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_prealloc_block(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_PREALLOC_SPACE(inode,
+	return vfs_dq_prealloc_space(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_ALLOC_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_ALLOC_SPACE_NODIRTY(inode,
+ 	return vfs_dq_alloc_space_nodirty(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline int DQUOT_ALLOC_BLOCK(struct inode *inode, qsize_t nr)
+static inline int vfs_dq_alloc_block(struct inode *inode, qsize_t nr)
 {
-	return DQUOT_ALLOC_SPACE(inode,
+	return vfs_dq_alloc_space(inode,
 			nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline void DQUOT_FREE_BLOCK_NODIRTY(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_block_nodirty(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE_NODIRTY(inode, nr << inode->i_sb->s_blocksize_bits);
+	vfs_dq_free_space_nodirty(inode, nr << inode->i_sb->s_blocksize_bits);
 }
 
-static inline void DQUOT_FREE_BLOCK(struct inode *inode, qsize_t nr)
+static inline void vfs_dq_free_block(struct inode *inode, qsize_t nr)
 {
-	DQUOT_FREE_SPACE(inode, nr << inode->i_sb->s_blocksize_bits);
+	vfs_dq_free_space(inode, nr << inode->i_sb->s_blocksize_bits);
 }
 
+/*
+ * Define uppercase equivalents for compatibility with old function names
+ * Can go away when we think all users have been converted (15/04/2008)
+ */
+#define DQUOT_INIT(inode) vfs_dq_init(inode)
+#define DQUOT_DROP(inode) vfs_dq_drop(inode)
+#define DQUOT_PREALLOC_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_prealloc_space_nodirty(inode, nr)
+#define DQUOT_PREALLOC_SPACE(inode, nr) vfs_dq_prealloc_space(inode, nr)
+#define DQUOT_ALLOC_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_alloc_space_nodirty(inode, nr)
+#define DQUOT_ALLOC_SPACE(inode, nr) vfs_dq_alloc_space(inode, nr)
+#define DQUOT_PREALLOC_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_prealloc_block_nodirty(inode, nr)
+#define DQUOT_PREALLOC_BLOCK(inode, nr) vfs_dq_prealloc_block(inode, nr)
+#define DQUOT_ALLOC_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_alloc_block_nodirty(inode, nr)
+#define DQUOT_ALLOC_BLOCK(inode, nr) vfs_dq_alloc_block(inode, nr)
+#define DQUOT_ALLOC_INODE(inode) vfs_dq_alloc_inode(inode)
+#define DQUOT_FREE_SPACE_NODIRTY(inode, nr) \
+				vfs_dq_free_space_nodirty(inode, nr)
+#define DQUOT_FREE_SPACE(inode, nr) vfs_dq_free_space(inode, nr)
+#define DQUOT_FREE_BLOCK_NODIRTY(inode, nr) \
+				vfs_dq_free_block_nodirty(inode, nr)
+#define DQUOT_FREE_BLOCK(inode, nr) vfs_dq_free_block(inode, nr)
+#define DQUOT_FREE_INODE(inode) vfs_dq_free_inode(inode)
+#define DQUOT_TRANSFER(inode, iattr) vfs_dq_transfer(inode, iattr)
+#define DQUOT_SYNC(sb) vfs_dq_sync(sb)
+#define DQUOT_OFF(sb, remount) vfs_dq_off(sb, remount)
+#define DQUOT_ON_REMOUNT(sb) vfs_dq_quota_on_remount(sb)
+
 #endif /* _LINUX_QUOTAOPS_ */
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index b8ce2b444bb5..a916c6660dfa 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -99,12 +99,15 @@ do {									\
  *
  * The notable exceptions to this rule are the following functions:
  * radix_tree_lookup
+ * radix_tree_lookup_slot
  * radix_tree_tag_get
  * radix_tree_gang_lookup
+ * radix_tree_gang_lookup_slot
  * radix_tree_gang_lookup_tag
+ * radix_tree_gang_lookup_tag_slot
  * radix_tree_tagged
  *
- * The first 4 functions are able to be called locklessly, using RCU. The
+ * The first 7 functions are able to be called locklessly, using RCU. The
  * caller must ensure calls to these functions are made within rcu_read_lock()
  * regions. Other readers (lock-free or otherwise) and modifications may be
  * running concurrently.
@@ -159,6 +162,9 @@ void *radix_tree_delete(struct radix_tree_root *, unsigned long);
 unsigned int
 radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 			unsigned long first_index, unsigned int max_items);
+unsigned int
+radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
+			unsigned long first_index, unsigned int max_items);
 unsigned long radix_tree_next_hole(struct radix_tree_root *root,
 				unsigned long index, unsigned long max_scan);
 int radix_tree_preload(gfp_t gfp_mask);
@@ -173,6 +179,10 @@ unsigned int
 radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 		unsigned long first_index, unsigned int max_items,
 		unsigned int tag);
+unsigned int
+radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
+		unsigned long first_index, unsigned int max_items,
+		unsigned int tag);
 int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag);
 
 static inline void radix_tree_preload_end(void)
diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h
index 78bfdea24a8e..e98900671ca9 100644
--- a/include/linux/raid/bitmap.h
+++ b/include/linux/raid/bitmap.h
@@ -221,6 +221,7 @@ struct bitmap {
 	unsigned long syncchunk;
 
 	__u64	events_cleared;
+	int need_sync;
 
 	/* bitmap spinlock */
 	spinlock_t lock;
diff --git a/include/linux/raid/linear.h b/include/linux/raid/linear.h
index ba15469daf11..7e375111d007 100644
--- a/include/linux/raid/linear.h
+++ b/include/linux/raid/linear.h
@@ -16,7 +16,7 @@ struct linear_private_data
 	struct linear_private_data *prev;	/* earlier version */
 	dev_info_t		**hash_table;
 	sector_t		hash_spacing;
-	sector_t		array_size;
+	sector_t		array_sectors;
 	int			preshift; /* shift before dividing by hash_spacing */
 	dev_info_t		disks[0];
 };
diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h
index b7386ae9d288..dc0e3fcb9f28 100644
--- a/include/linux/raid/md.h
+++ b/include/linux/raid/md.h
@@ -95,7 +95,7 @@ extern int sync_page_io(struct block_device *bdev, sector_t sector, int size,
 			struct page *page, int rw);
 extern void md_do_sync(mddev_t *mddev);
 extern void md_new_event(mddev_t *mddev);
-extern void md_allow_write(mddev_t *mddev);
+extern int md_allow_write(mddev_t *mddev);
 extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
 
 #endif /* CONFIG_MD */
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 3dea9f545c8f..c200b9a34aff 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -59,7 +59,7 @@ struct mdk_rdev_s
 	int		sb_loaded;
 	__u64		sb_events;
 	sector_t	data_offset;	/* start of data in array */
-	sector_t	sb_offset;
+	sector_t 	sb_start;	/* offset of the super block (in 512byte sectors) */
 	int		sb_size;	/* bytes in the superblock */
 	int		preferred_minor;	/* autorun support */
 
@@ -87,6 +87,9 @@ struct mdk_rdev_s
 #define Blocked		8		/* An error occured on an externally
 					 * managed array, don't allow writes
 					 * until it is cleared */
+#define StateChanged	9		/* Faulty or Blocked has changed during
+					 * interrupt, so it needs to be
+					 * notified by the thread */
 	wait_queue_head_t blocked_wait;
 
 	int desc_nr;			/* descriptor index in the superblock */
@@ -125,6 +128,7 @@ struct mddev_s
 #define MD_CHANGE_DEVS	0	/* Some device status has changed */
 #define MD_CHANGE_CLEAN 1	/* transition to or from 'clean' */
 #define MD_CHANGE_PENDING 2	/* superblock update in progress */
+#define MD_NOTIFY_ARRAY_STATE 3	/* atomic context wants to notify userspace */
 
 	int				ro;
 
@@ -147,7 +151,7 @@ struct mddev_s
 	int				raid_disks;
 	int				max_disks;
 	sector_t			size; /* used size of component devices */
-	sector_t			array_size; /* exported array size */
+	sector_t			array_sectors; /* exported array size */
 	__u64				events;
 
 	char				uuid[16];
@@ -188,6 +192,7 @@ struct mddev_s
 	 * NEEDED:   we might need to start a resync/recover
 	 * RUNNING:  a thread is running, or about to be started
 	 * SYNC:     actually doing a resync, not a recovery
+	 * RECOVER:  doing recovery, or need to try it.
 	 * INTR:     resync needs to be aborted for some reason
 	 * DONE:     thread is done and is waiting to be reaped
 	 * REQUEST:  user-space has requested a sync (used with SYNC)
@@ -198,6 +203,7 @@ struct mddev_s
 	 */
 #define	MD_RECOVERY_RUNNING	0
 #define	MD_RECOVERY_SYNC	1
+#define	MD_RECOVERY_RECOVER	2
 #define	MD_RECOVERY_INTR	3
 #define	MD_RECOVERY_DONE	4
 #define	MD_RECOVERY_NEEDED	5
@@ -210,7 +216,8 @@ struct mddev_s
 
 	int				in_sync;	/* know to not need resync */
 	struct mutex			reconfig_mutex;
-	atomic_t			active;
+	atomic_t			active;		/* general refcount */
+	atomic_t			openers;	/* number of active opens */
 
 	int				changed;	/* true if we might need to reread partition info */
 	int				degraded;	/* whether md should consider
@@ -227,6 +234,8 @@ struct mddev_s
 	atomic_t			recovery_active; /* blocks scheduled, but not written */
 	wait_queue_head_t		recovery_wait;
 	sector_t			recovery_cp;
+	sector_t			resync_min;	/* user requested sync
+							 * starts here */
 	sector_t			resync_max;	/* resync should pause
 							 * when it gets here */
 
@@ -331,6 +340,9 @@ static inline char * mdname (mddev_t * mddev)
 #define rdev_for_each(rdev, tmp, mddev)				\
 	rdev_for_each_list(rdev, tmp, (mddev)->disks)
 
+#define rdev_for_each_rcu(rdev, mddev)				\
+	list_for_each_entry_rcu(rdev, &((mddev)->disks), same_set)
+
 typedef struct mdk_thread_s {
 	void			(*run) (mddev_t *mddev);
 	mddev_t			*mddev;
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
index 3f2cd98c508b..8b4de4a41ff1 100644
--- a/include/linux/raid/md_p.h
+++ b/include/linux/raid/md_p.h
@@ -43,14 +43,11 @@
  */
 #define MD_RESERVED_BYTES		(64 * 1024)
 #define MD_RESERVED_SECTORS		(MD_RESERVED_BYTES / 512)
-#define MD_RESERVED_BLOCKS		(MD_RESERVED_BYTES / BLOCK_SIZE)
 
 #define MD_NEW_SIZE_SECTORS(x)		((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
-#define MD_NEW_SIZE_BLOCKS(x)		((x & ~(MD_RESERVED_BLOCKS - 1)) - MD_RESERVED_BLOCKS)
 
 #define MD_SB_BYTES			4096
 #define MD_SB_WORDS			(MD_SB_BYTES / 4)
-#define MD_SB_BLOCKS			(MD_SB_BYTES / BLOCK_SIZE)
 #define MD_SB_SECTORS			(MD_SB_BYTES / 512)
 
 /*
diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h
index f0827d31ae6f..3b2672792457 100644
--- a/include/linux/raid/raid5.h
+++ b/include/linux/raid/raid5.h
@@ -158,6 +158,43 @@
  *    the compute block completes.
  */
 
+/*
+ * Operations state - intermediate states that are visible outside of sh->lock
+ * In general _idle indicates nothing is running, _run indicates a data
+ * processing operation is active, and _result means the data processing result
+ * is stable and can be acted upon.  For simple operations like biofill and
+ * compute that only have an _idle and _run state they are indicated with
+ * sh->state flags (STRIPE_BIOFILL_RUN and STRIPE_COMPUTE_RUN)
+ */
+/**
+ * enum check_states - handles syncing / repairing a stripe
+ * @check_state_idle - check operations are quiesced
+ * @check_state_run - check operation is running
+ * @check_state_result - set outside lock when check result is valid
+ * @check_state_compute_run - check failed and we are repairing
+ * @check_state_compute_result - set outside lock when compute result is valid
+ */
+enum check_states {
+	check_state_idle = 0,
+	check_state_run, /* parity check */
+	check_state_check_result,
+	check_state_compute_run, /* parity repair */
+	check_state_compute_result,
+};
+
+/**
+ * enum reconstruct_states - handles writing or expanding a stripe
+ */
+enum reconstruct_states {
+	reconstruct_state_idle = 0,
+	reconstruct_state_prexor_drain_run,	/* prexor-write */
+	reconstruct_state_drain_run,		/* write */
+	reconstruct_state_run,			/* expand */
+	reconstruct_state_prexor_drain_result,
+	reconstruct_state_drain_result,
+	reconstruct_state_result,
+};
+
 struct stripe_head {
 	struct hlist_node	hash;
 	struct list_head	lru;			/* inactive_list or handle_list */
@@ -169,19 +206,13 @@ struct stripe_head {
 	spinlock_t		lock;
 	int			bm_seq;	/* sequence number for bitmap flushes */
 	int			disks;			/* disks in stripe */
+	enum check_states	check_state;
+	enum reconstruct_states reconstruct_state;
 	/* stripe_operations
-	 * @pending - pending ops flags (set for request->issue->complete)
-	 * @ack - submitted ops flags (set for issue->complete)
-	 * @complete - completed ops flags (set for complete)
 	 * @target - STRIPE_OP_COMPUTE_BLK target
-	 * @count - raid5_runs_ops is set to run when this is non-zero
 	 */
 	struct stripe_operations {
-		unsigned long	   pending;
-		unsigned long	   ack;
-		unsigned long	   complete;
 		int		   target;
-		int		   count;
 		u32		   zero_sum_result;
 	} ops;
 	struct r5dev {
@@ -202,6 +233,7 @@ struct stripe_head_state {
 	int locked, uptodate, to_read, to_write, failed, written;
 	int to_fill, compute, req_compute, non_overwrite;
 	int failed_num;
+	unsigned long ops_request;
 };
 
 /* r6_state - extra state data only relevant to r6 */
@@ -228,9 +260,7 @@ struct r6_state {
 #define	R5_Wantfill	12 /* dev->toread contains a bio that needs
 				    * filling
 				    */
-#define	R5_Wantprexor	13 /* distinguish blocks ready for rmw from
-				    * other "towrites"
-				    */
+#define R5_Wantdrain	13 /* dev->towrite needs to be drained */
 /*
  * Write method
  */
@@ -254,8 +284,10 @@ struct r6_state {
 #define	STRIPE_EXPAND_READY	11
 #define	STRIPE_IO_STARTED	12 /* do not count towards 'bypass_count' */
 #define	STRIPE_FULL_WRITE	13 /* all blocks are set to be overwritten */
+#define	STRIPE_BIOFILL_RUN	14
+#define	STRIPE_COMPUTE_RUN	15
 /*
- * Operations flags (in issue order)
+ * Operation request flags
  */
 #define STRIPE_OP_BIOFILL	0
 #define STRIPE_OP_COMPUTE_BLK	1
@@ -263,14 +295,6 @@ struct r6_state {
 #define STRIPE_OP_BIODRAIN	3
 #define STRIPE_OP_POSTXOR	4
 #define STRIPE_OP_CHECK	5
-#define STRIPE_OP_IO		6
-
-/* modifiers to the base operations
- * STRIPE_OP_MOD_REPAIR_PD - compute the parity block and write it back
- * STRIPE_OP_MOD_DMA_CHECK - parity is not corrupted by the check
- */
-#define STRIPE_OP_MOD_REPAIR_PD 7
-#define STRIPE_OP_MOD_DMA_CHECK 8
 
 /*
  * Plugging:
diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h
new file mode 100644
index 000000000000..18a5b9ba9d40
--- /dev/null
+++ b/include/linux/ratelimit.h
@@ -0,0 +1,27 @@
+#ifndef _LINUX_RATELIMIT_H
+#define _LINUX_RATELIMIT_H
+#include <linux/param.h>
+
+#define DEFAULT_RATELIMIT_INTERVAL (5 * HZ)
+#define DEFAULT_RATELIMIT_BURST 10
+
+struct ratelimit_state {
+	int interval;
+	int burst;
+	int printed;
+	int missed;
+	unsigned long begin;
+};
+
+#define DEFINE_RATELIMIT_STATE(name, interval, burst)		\
+		struct ratelimit_state name = {interval, burst,}
+
+extern int __ratelimit(struct ratelimit_state *rs);
+
+static inline int ratelimit(void)
+{
+	static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
+					DEFAULT_RATELIMIT_BURST);
+	return __ratelimit(&rs);
+}
+#endif
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index b0f39be08b6c..eb4443c7e05b 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -98,6 +98,34 @@ static inline void list_del_rcu(struct list_head *entry)
 }
 
 /**
+ * hlist_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: list_unhashed() on the node return true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_add_head_rcu() or
+ * hlist_del_rcu(), running on this same list.  However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_for_each_entry_rcu().
+ */
+static inline void hlist_del_init_rcu(struct hlist_node *n)
+{
+	if (!hlist_unhashed(n)) {
+		__hlist_del(n);
+		n->pprev = NULL;
+	}
+}
+
+/**
  * list_replace_rcu - replace old entry by new one
  * @old : the element to be replaced
  * @new : the new element to insert
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index f04b64eca636..0967f03b0705 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -115,16 +115,21 @@ DECLARE_PER_CPU(struct rcu_dyntick_sched, rcu_dyntick_sched);
 
 static inline void rcu_enter_nohz(void)
 {
+	static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
+
 	smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
 	__get_cpu_var(rcu_dyntick_sched).dynticks++;
-	WARN_ON(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1);
+	WARN_ON_RATELIMIT(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1, &rs);
 }
 
 static inline void rcu_exit_nohz(void)
 {
+	static DEFINE_RATELIMIT_STATE(rs, 10 * HZ, 1);
+
 	smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
 	__get_cpu_var(rcu_dyntick_sched).dynticks++;
-	WARN_ON(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1));
+	WARN_ON_RATELIMIT(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1),
+				&rs);
 }
 
 #else /* CONFIG_NO_HZ */
diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
new file mode 100644
index 000000000000..e84b0a9feda5
--- /dev/null
+++ b/include/linux/regulator/bq24022.h
@@ -0,0 +1,21 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * bq24022_mach_info - platform data for bq24022
+ * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
+ * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
+ */
+struct bq24022_mach_info {
+	int gpio_nce;
+	int gpio_iset2;
+};
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
new file mode 100644
index 000000000000..afdc4558bb94
--- /dev/null
+++ b/include/linux/regulator/consumer.h
@@ -0,0 +1,284 @@
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ *   o Voltage and current level control.
+ *   o Operating mode control.
+ *   o Regulator status.
+ *   o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ *   Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ *   to use most efficient operating mode depending upon voltage and load and
+ *   is transparent to client drivers.
+ *
+ *   e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ *   IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ *   idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ *   but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ *   efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ *   in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ *  Mode       Description
+ *  FAST       Regulator can handle fast changes in it's load.
+ *             e.g. useful in CPU voltage & frequency scaling where
+ *             load can quickly increase with CPU frequency increases.
+ *
+ *  NORMAL     Normal regulator power supply mode. Most drivers will
+ *             use this mode.
+ *
+ *  IDLE       Regulator runs in a more efficient mode for light
+ *             loads. Can be used for devices that have a low power
+ *             requirement during periods of inactivity. This mode
+ *             may be more noisy than NORMAL and may not be able
+ *             to handle fast load switching.
+ *
+ *  STANDBY    Regulator runs in the most efficient mode for very
+ *             light loads. Can be used by devices when they are
+ *             in a sleep/standby state. This mode is likely to be
+ *             the most noisy and may not be able to handle fast load
+ *             switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST			0x1
+#define REGULATOR_MODE_NORMAL			0x2
+#define REGULATOR_MODE_IDLE			0x4
+#define REGULATOR_MODE_STANDBY			0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator shut down by software.
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
+#define REGULATOR_EVENT_OVER_CURRENT		0x02
+#define REGULATOR_EVENT_REGULATION_OUT		0x04
+#define REGULATOR_EVENT_FAIL			0x08
+#define REGULATOR_EVENT_OVER_TEMP		0x10
+#define REGULATOR_EVENT_FORCE_DISABLE		0x20
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply   The name of the supply.  Initialised by the user before
+ *           using the bulk regulator APIs.
+ * @consumer The regulator consumer for the supply.  This will be managed
+ *           by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies.  This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+	const char *supply;
+	struct regulator *consumer;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+					     const char *id);
+void regulator_put(struct regulator *regulator);
+
+/* regulator output control and status */
+int regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+
+int regulator_bulk_get(struct device *dev, int num_consumers,
+		       struct regulator_bulk_data *consumers);
+int regulator_bulk_enable(int num_consumers,
+			  struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+			 struct regulator_bulk_data *consumers);
+
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+			       int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+	const char *id)
+{
+	/* Nothing except the stubbed out regulator API should be
+	 * looking at the value except to check if it is an error
+	 * value so the actual return value doesn't matter.
+	 */
+	return (struct regulator *)id;
+}
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+	return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+				     int num_consumers,
+				     struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+					struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+					 struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+				       struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+					int min_uV, int max_uV)
+{
+	return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+					     int min_uA, int max_uA)
+{
+	return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+	unsigned int mode)
+{
+	return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+					int load_uA)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+	return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+	void *data)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644
index 000000000000..1d712c7172a2
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,99 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_constraints;
+struct regulator_dev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+	/* get/set regulator voltage */
+	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
+	int (*get_voltage) (struct regulator_dev *);
+
+	/* get/set regulator current  */
+	int (*set_current_limit) (struct regulator_dev *,
+				 int min_uA, int max_uA);
+	int (*get_current_limit) (struct regulator_dev *);
+
+	/* enable/disable regulator */
+	int (*enable) (struct regulator_dev *);
+	int (*disable) (struct regulator_dev *);
+	int (*is_enabled) (struct regulator_dev *);
+
+	/* get/set regulator operating mode (defined in regulator.h) */
+	int (*set_mode) (struct regulator_dev *, unsigned int mode);
+	unsigned int (*get_mode) (struct regulator_dev *);
+
+	/* get most efficient regulator operating mode for load */
+	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+					  int output_uV, int load_uA);
+
+	/* the operations below are for configuration of regulator state when
+	 * it's parent PMIC enters a global STANBY/HIBERNATE state */
+
+	/* set regulator suspend voltage */
+	int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+	/* enable/disable regulator in suspend state */
+	int (*set_suspend_enable) (struct regulator_dev *);
+	int (*set_suspend_disable) (struct regulator_dev *);
+
+	/* set regulator suspend operating mode (defined in regulator.h) */
+	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+	REGULATOR_VOLTAGE,
+	REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+	const char *name;
+	int id;
+	struct regulator_ops *ops;
+	int irq;
+	enum regulator_type type;
+	struct module *owner;
+};
+
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					  void *reg_data);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
new file mode 100644
index 000000000000..1387a5d2190e
--- /dev/null
+++ b/include/linux/regulator/fixed.h
@@ -0,0 +1,22 @@
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct fixed_voltage_config {
+	const char *supply_name;
+	int microvolts;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 000000000000..11e737dbfcf2
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,104 @@
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE:  Regulator output voltage can be changed by software on this
+ *           board/machine.
+ * CURRENT:  Regulator output current can be changed by software on this
+ *           board/machine.
+ * MODE:     Regulator operating mode can be changed by software on this
+ *           board/machine.
+ * STATUS:   Regulator can be enabled and disabled.
+ * DRMS:     Dynamic Regulator Mode Switching is enabled for this regulator.
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE	0x1
+#define REGULATOR_CHANGE_CURRENT	0x2
+#define REGULATOR_CHANGE_MODE		0x4
+#define REGULATOR_CHANGE_STATUS		0x8
+#define REGULATOR_CHANGE_DRMS		0x10
+
+/**
+ * struct regulator_state - regulator state during low power syatem states
+ *
+ * This describes a regulators state during a system wide low power state.
+ */
+struct regulator_state {
+	int uV;	/* suspend voltage */
+	unsigned int mode; /* suspend regulator operating mode */
+	int enabled; /* is regulator enabled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ */
+struct regulation_constraints {
+
+	char *name;
+
+	/* voltage output range (inclusive) - for voltage control */
+	int min_uV;
+	int max_uV;
+
+	/* current output range (inclusive) - for current control */
+	int min_uA;
+	int max_uA;
+
+	/* valid regulator operating modes for this machine */
+	unsigned int valid_modes_mask;
+
+	/* valid operations for regulator on this machine */
+	unsigned int valid_ops_mask;
+
+	/* regulator input voltage - only if supply is another regulator */
+	int input_uV;
+
+	/* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+	struct regulator_state state_disk;
+	struct regulator_state state_mem;
+	struct regulator_state state_standby;
+	suspend_state_t initial_state; /* suspend state to set at init */
+
+	/* constriant flags */
+	unsigned always_on:1;	/* regulator never off when system is on */
+	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
+	unsigned apply_uV:1;	/* apply uV constraint iff min == max */
+};
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+const char *regulator_get_supply(const char *regulator);
+
+int regulator_set_machine_constraints(const char *regulator,
+	struct regulation_constraints *constraints);
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+				const char *supply);
+
+int regulator_suspend_prepare(suspend_state_t state);
+
+#endif
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 4aacaeecb56f..e9963af16cda 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -526,8 +526,8 @@ struct item_head {
 ** p is the array of __u32, i is the index into the array, v is the value
 ** to store there.
 */
-#define get_block_num(p, i) le32_to_cpu(get_unaligned((p) + (i)))
-#define put_block_num(p, i, v) put_unaligned(cpu_to_le32(v), (p) + (i))
+#define get_block_num(p, i) get_unaligned_le32((p) + (i))
+#define put_block_num(p, i, v) put_unaligned_le32((v), (p) + (i))
 
 //
 // in old version uniqueness field shows key type
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 336ee43ed7d8..315517e8bfa1 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -152,7 +152,7 @@ struct reiserfs_journal_list {
 	atomic_t j_nonzerolen;
 	atomic_t j_commit_left;
 	atomic_t j_older_commits_done;	/* all commits older than this on disk */
-	struct semaphore j_commit_lock;
+	struct mutex j_commit_mutex;
 	unsigned long j_trans_id;
 	time_t j_timestamp;
 	struct reiserfs_list_bitmap *j_list_bitmap;
@@ -193,8 +193,8 @@ struct reiserfs_journal {
 	struct buffer_head *j_header_bh;
 
 	time_t j_trans_start_time;	/* time this transaction started */
-	struct semaphore j_lock;
-	struct semaphore j_flush_sem;
+	struct mutex j_mutex;
+	struct mutex j_flush_mutex;
 	wait_queue_head_t j_join_wait;	/* wait for current transaction to finish before starting new one */
 	atomic_t j_jlock;	/* lock for j_join_wait */
 	int j_list_bitmap_index;	/* number of next list bitmap to use */
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index 66a96814d614..af135ae895db 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -55,7 +55,7 @@ int reiserfs_removexattr(struct dentry *dentry, const char *name);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
 int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
-int reiserfs_permission(struct inode *inode, int mask, struct nameidata *nd);
+int reiserfs_permission(struct inode *inode, int mask);
 
 int reiserfs_xattr_del(struct inode *, const char *);
 int reiserfs_xattr_get(const struct inode *, const char *, void *, size_t);
diff --git a/include/linux/relay.h b/include/linux/relay.h
index 6cd8c4425fc7..953fc055e875 100644
--- a/include/linux/relay.h
+++ b/include/linux/relay.h
@@ -48,6 +48,7 @@ struct rchan_buf
 	size_t *padding;		/* padding counts per sub-buffer */
 	size_t prev_padding;		/* temporary variable */
 	size_t bytes_consumed;		/* bytes consumed in cur read subbuf */
+	size_t early_bytes;		/* bytes consumed before VFS inited */
 	unsigned int cpu;		/* this buf's cpu */
 } ____cacheline_aligned;
 
@@ -68,6 +69,7 @@ struct rchan
 	int is_global;			/* One global buffer ? */
 	struct list_head list;		/* for channel list */
 	struct dentry *parent;		/* parent dentry passed to open */
+	int has_base_filename;		/* has a filename associated? */
 	char base_filename[NAME_MAX];	/* saved base filename */
 };
 
@@ -169,6 +171,9 @@ struct rchan *relay_open(const char *base_filename,
 			 size_t n_subbufs,
 			 struct rchan_callbacks *cb,
 			 void *private_data);
+extern int relay_late_setup_files(struct rchan *chan,
+				  const char *base_filename,
+				  struct dentry *parent);
 extern void relay_close(struct rchan *chan);
 extern void relay_flush(struct rchan *chan);
 extern void relay_subbufs_consumed(struct rchan *chan,
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 6d9e1fca098c..fdeadd9740dc 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -63,9 +63,14 @@ u64 res_counter_read_u64(struct res_counter *counter, int member);
 ssize_t res_counter_read(struct res_counter *counter, int member,
 		const char __user *buf, size_t nbytes, loff_t *pos,
 		int (*read_strategy)(unsigned long long val, char *s));
-ssize_t res_counter_write(struct res_counter *counter, int member,
-		const char __user *buf, size_t nbytes, loff_t *pos,
-		int (*write_strategy)(char *buf, unsigned long long *val));
+
+typedef int (*write_strategy_fn)(const char *buf, unsigned long long *val);
+
+int res_counter_memparse_write_strategy(const char *buf,
+					unsigned long long *res);
+
+int res_counter_write(struct res_counter *counter, int member,
+		      const char *buffer, write_strategy_fn write_strategy);
 
 /*
  * the field descriptors. one for each member of res_counter
@@ -95,8 +100,10 @@ void res_counter_init(struct res_counter *counter);
  * counter->limit _locked call expects the counter->lock to be taken
  */
 
-int res_counter_charge_locked(struct res_counter *counter, unsigned long val);
-int res_counter_charge(struct res_counter *counter, unsigned long val);
+int __must_check res_counter_charge_locked(struct res_counter *counter,
+		unsigned long val);
+int __must_check res_counter_charge(struct res_counter *counter,
+		unsigned long val);
 
 /*
  * uncharge - tell that some portion of the resource is released
@@ -151,4 +158,20 @@ static inline void res_counter_reset_failcnt(struct res_counter *cnt)
 	cnt->failcnt = 0;
 	spin_unlock_irqrestore(&cnt->lock, flags);
 }
+
+static inline int res_counter_set_limit(struct res_counter *cnt,
+		unsigned long long limit)
+{
+	unsigned long flags;
+	int ret = -EBUSY;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	if (cnt->usage < limit) {
+		cnt->limit = limit;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&cnt->lock, flags);
+	return ret;
+}
+
 #endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index e3ab21d7fc7f..741d1a62cc3f 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -34,33 +34,51 @@
  * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
  * RFKILL_TYPE_UWB: switch is on a ultra wideband device.
  * RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
  */
 enum rfkill_type {
 	RFKILL_TYPE_WLAN ,
 	RFKILL_TYPE_BLUETOOTH,
 	RFKILL_TYPE_UWB,
 	RFKILL_TYPE_WIMAX,
+	RFKILL_TYPE_WWAN,
 	RFKILL_TYPE_MAX,
 };
 
 enum rfkill_state {
-	RFKILL_STATE_OFF	= 0,
-	RFKILL_STATE_ON		= 1,
+	RFKILL_STATE_SOFT_BLOCKED = 0,	/* Radio output blocked */
+	RFKILL_STATE_UNBLOCKED    = 1,	/* Radio output allowed */
+	RFKILL_STATE_HARD_BLOCKED = 2,	/* Output blocked, non-overrideable */
 };
 
+/*
+ * These are DEPRECATED, drivers using them should be verified to
+ * comply with the rfkill usage guidelines in Documentation/rfkill.txt
+ * and then converted to use the new names for rfkill_state
+ */
+#define RFKILL_STATE_OFF RFKILL_STATE_SOFT_BLOCKED
+#define RFKILL_STATE_ON  RFKILL_STATE_UNBLOCKED
+
 /**
  * struct rfkill - rfkill control structure.
  * @name: Name of the switch.
  * @type: Radio type which the button controls, the value stored
  *	here should be a value from enum rfkill_type.
- * @state: State of the switch (on/off).
+ * @state: State of the switch, "UNBLOCKED" means radio can operate.
  * @user_claim_unsupported: Whether the hardware supports exclusive
  *	RF-kill control by userspace. Set this before registering.
  * @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions
+ * @mutex: Guards switch state transitions.  It serializes callbacks
+ *	and also protects the state.
  * @data: Pointer to the RF button drivers private data which will be
  *	passed along when toggling radio state.
  * @toggle_radio(): Mandatory handler to control state of the radio.
+ *	only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are
+ *	valid parameters.
+ * @get_state(): handler to read current radio state from hardware,
+ *      may be called from atomic context, should return 0 on success.
+ *      Either this handler OR judicious use of rfkill_force_state() is
+ *      MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED.
  * @led_trigger: A LED trigger for this button's LED.
  * @dev: Device structure integrating the switch into device tree.
  * @node: Used to place switch into list of all switches known to the
@@ -72,14 +90,16 @@ struct rfkill {
 	const char *name;
 	enum rfkill_type type;
 
-	enum rfkill_state state;
 	bool user_claim_unsupported;
 	bool user_claim;
 
+	/* the mutex serializes callbacks and also protects
+	 * the state */
 	struct mutex mutex;
-
+	enum rfkill_state state;
 	void *data;
 	int (*toggle_radio)(void *data, enum rfkill_state state);
+	int (*get_state)(void *data, enum rfkill_state *state);
 
 #ifdef CONFIG_RFKILL_LEDS
 	struct led_trigger led_trigger;
@@ -95,6 +115,21 @@ void rfkill_free(struct rfkill *rfkill);
 int rfkill_register(struct rfkill *rfkill);
 void rfkill_unregister(struct rfkill *rfkill);
 
+int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state);
+
+/**
+ * rfkill_state_complement - return complementar state
+ * @state: state to return the complement of
+ *
+ * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED,
+ * returns RFKILL_STATE_UNBLOCKED otherwise.
+ */
+static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state)
+{
+	return (state == RFKILL_STATE_UNBLOCKED) ?
+		RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED;
+}
+
 /**
  * rfkill_get_led_name - Get the LED trigger name for the button's LED.
  * This function might return a NULL pointer if registering of the
@@ -110,4 +145,11 @@ static inline char *rfkill_get_led_name(struct rfkill *rfkill)
 #endif
 }
 
+/* rfkill notification chain */
+#define RFKILL_STATE_CHANGED		0x0001	/* state of a normal rfkill
+						   switch has changed */
+
+int register_rfkill_notifier(struct notifier_block *nb);
+int unregister_rfkill_notifier(struct notifier_block *nb);
+
 #endif /* RFKILL_H */
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 1383692ac5bd..69407f85e10b 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -26,6 +26,14 @@
  */
 struct anon_vma {
 	spinlock_t lock;	/* Serialize access to vma list */
+	/*
+	 * NOTE: the LSB of the head.next is set by
+	 * mm_take_all_locks() _after_ taking the above lock. So the
+	 * head must only be read/written after taking the above lock
+	 * to be sure to see a valid next pointer. The LSB bit itself
+	 * is serialized by a system wide lock only visible to
+	 * mm_take_all_locks() (mm_all_locks_mutex).
+	 */
 	struct list_head head;	/* List of private "related" vmas */
 };
 
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index f2d0d1527721..91f597ad6acc 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -115,6 +115,23 @@ extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
 
 extern struct class *rtc_class;
 
+/*
+ * For these RTC methods the device parameter is the physical device
+ * on whatever bus holds the hardware (I2C, Platform, SPI, etc), which
+ * was passed to rtc_device_register().  Its driver_data normally holds
+ * device state, including the rtc_device pointer for the RTC.
+ *
+ * Most of these methods are called with rtc_device.ops_lock held,
+ * through the rtc_*(struct rtc_device *, ...) calls.
+ *
+ * The (current) exceptions are mostly filesystem hooks:
+ *   - the proc() hook for procfs
+ *   - non-ioctl() chardev hooks:  open(), release(), read_callback()
+ *   - periodic irq calls:  irq_set_state(), irq_set_freq()
+ *
+ * REVISIT those periodic irq calls *do* have ops_lock when they're
+ * issued through ioctl() ...
+ */
 struct rtc_class_ops {
 	int (*open)(struct device *);
 	void (*release)(struct device *);
@@ -208,8 +225,6 @@ typedef struct rtc_task {
 int rtc_register(rtc_task_t *task);
 int rtc_unregister(rtc_task_t *task);
 int rtc_control(rtc_task_t *t, unsigned int cmd, unsigned long arg);
-void rtc_get_rtc_time(struct rtc_time *rtc_tm);
-irqreturn_t rtc_interrupt(int irq, void *dev_id);
 
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index b358c704d102..ca643b13b026 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -482,6 +482,7 @@ enum
 	TCA_RATE,
 	TCA_FCNT,
 	TCA_STATS2,
+	TCA_STAB,
 	__TCA_MAX
 };
 
@@ -754,13 +755,6 @@ extern void __rtnl_unlock(void);
 	} \
 } while(0)
 
-#define BUG_TRAP(x) do { \
-	if (unlikely(!(x))) { \
-		printk(KERN_ERR "KERNEL: assertion (%s) failed at %s (%d)\n", \
-			#x,  __FILE__ , __LINE__); \
-	} \
-} while(0)
-
 static inline u32 rtm_get_table(struct rtattr **rta, u8 table)
 {
 	return RTA_GET_U32(rta[RTA_TABLE-1]);
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 71fc81360048..e5996984ddd0 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -224,4 +224,42 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
  */
 #define SG_MAX_SINGLE_ALLOC		(PAGE_SIZE / sizeof(struct scatterlist))
 
+
+/*
+ * Mapping sg iterator
+ *
+ * Iterates over sg entries mapping page-by-page.  On each successful
+ * iteration, @miter->page points to the mapped page and
+ * @miter->length bytes of data can be accessed at @miter->addr.  As
+ * long as an interation is enclosed between start and stop, the user
+ * is free to choose control structure and when to stop.
+ *
+ * @miter->consumed is set to @miter->length on each iteration.  It
+ * can be adjusted if the user can't consume all the bytes in one go.
+ * Also, a stopped iteration can be resumed by calling next on it.
+ * This is useful when iteration needs to release all resources and
+ * continue later (e.g. at the next interrupt).
+ */
+
+#define SG_MITER_ATOMIC		(1 << 0)	 /* use kmap_atomic */
+
+struct sg_mapping_iter {
+	/* the following three fields can be accessed directly */
+	struct page		*page;		/* currently mapped page */
+	void			*addr;		/* pointer to the mapped area */
+	size_t			length;		/* length of the mapped area */
+	size_t			consumed;	/* number of consumed bytes */
+
+	/* these are internal states, keep away */
+	struct scatterlist	*__sg;		/* current entry */
+	unsigned int		__nents;	/* nr of remaining entries */
+	unsigned int		__offset;	/* offset within sg */
+	unsigned int		__flags;
+};
+
+void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
+		    unsigned int nents, unsigned int flags);
+bool sg_miter_next(struct sg_mapping_iter *miter);
+void sg_miter_stop(struct sg_mapping_iter *miter);
+
 #endif /* _LINUX_SCATTERLIST_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 1941d8b5cf11..5270d449ff9d 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -292,13 +292,13 @@ extern void sched_show_task(struct task_struct *p);
 
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 extern void softlockup_tick(void);
-extern void spawn_softlockup_task(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
-extern unsigned long  softlockup_thresh;
+extern unsigned int  softlockup_panic;
 extern unsigned long sysctl_hung_task_check_count;
 extern unsigned long sysctl_hung_task_timeout_secs;
 extern unsigned long sysctl_hung_task_warnings;
+extern int softlockup_thresh;
 #else
 static inline void softlockup_tick(void)
 {
@@ -505,6 +505,7 @@ struct signal_struct {
 	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
 	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
 	unsigned long inblock, oublock, cinblock, coublock;
+	struct task_io_accounting ioac;
 
 	/*
 	 * Cumulative ns of scheduled CPU time for dead threads in the
@@ -667,6 +668,10 @@ struct task_delay_info {
 				/* io operations performed */
 	u32 swapin_count;	/* total count of the number of swapin block */
 				/* io operations performed */
+
+	struct timespec freepages_start, freepages_end;
+	u64 freepages_delay;	/* wait for memory reclaim */
+	u32 freepages_count;	/* total count of memory reclaim */
 };
 #endif	/* CONFIG_TASK_DELAY_ACCT */
 
@@ -824,7 +829,16 @@ extern void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
 				    struct sched_domain_attr *dattr_new);
 extern int arch_reinit_sched_domains(void);
 
-#endif	/* CONFIG_SMP */
+#else /* CONFIG_SMP */
+
+struct sched_domain_attr;
+
+static inline void
+partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
+			struct sched_domain_attr *dattr_new)
+{
+}
+#endif	/* !CONFIG_SMP */
 
 struct io_context;			/* See blkdev.h */
 #define NGROUPS_SMALL		32
@@ -1239,15 +1253,11 @@ struct task_struct {
 
 	unsigned long ptrace_message;
 	siginfo_t *last_siginfo; /* For ptrace use.  */
-#ifdef CONFIG_TASK_XACCT
-/* i/o counters(bytes read/written, #syscalls */
-	u64 rchar, wchar, syscr, syscw;
-#endif
 	struct task_io_accounting ioac;
 #if defined(CONFIG_TASK_XACCT)
 	u64 acct_rss_mem1;	/* accumulated rss usage */
 	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
-	cputime_t acct_stimexpd;/* stime since last update */
+	cputime_t acct_timexpd;	/* stime + utime since last update */
 #endif
 #ifdef CONFIG_CPUSETS
 	nodemask_t mems_allowed;
@@ -1486,7 +1496,7 @@ static inline void put_task_struct(struct task_struct *t)
 #define PF_KSWAPD	0x00040000	/* I am kswapd */
 #define PF_SWAPOFF	0x00080000	/* I am in swapoff */
 #define PF_LESS_THROTTLE 0x00100000	/* Throttle me less: I clean memory */
-#define PF_BORROWED_MM	0x00200000	/* I am a kthread doing use_mm */
+#define PF_KTHREAD	0x00200000	/* I am a kernel thread */
 #define PF_RANDOMIZE	0x00400000	/* randomize virtual address space */
 #define PF_SWAPWRITE	0x00800000	/* Allowed to write to swap */
 #define PF_SPREAD_PAGE	0x01000000	/* Spread page cache over cpuset */
@@ -1705,19 +1715,13 @@ extern struct pid_namespace init_pid_ns;
  *      finds a task by its pid in the specified namespace
  * find_task_by_vpid():
  *      finds a task by its virtual pid
- * find_task_by_pid():
- *      finds a task by its global pid
  *
- * see also find_pid() etc in include/linux/pid.h
+ * see also find_vpid() etc in include/linux/pid.h
  */
 
 extern struct task_struct *find_task_by_pid_type_ns(int type, int pid,
 		struct pid_namespace *ns);
 
-static inline struct task_struct *__deprecated find_task_by_pid(pid_t nr)
-{
-	return find_task_by_pid_type_ns(PIDTYPE_PID, nr, &init_pid_ns);
-}
 extern struct task_struct *find_task_by_vpid(pid_t nr);
 extern struct task_struct *find_task_by_pid_ns(pid_t nr,
 		struct pid_namespace *ns);
@@ -1785,12 +1789,11 @@ extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_
 extern int kill_pgrp(struct pid *pid, int sig, int priv);
 extern int kill_pid(struct pid *pid, int sig, int priv);
 extern int kill_proc_info(int, struct siginfo *, pid_t);
-extern void do_notify_parent(struct task_struct *, int);
+extern int do_notify_parent(struct task_struct *, int);
 extern void force_sig(int, struct task_struct *);
 extern void force_sig_specific(int, struct task_struct *);
 extern int send_sig(int, struct task_struct *, int);
 extern void zap_other_threads(struct task_struct *p);
-extern int kill_proc(pid_t, int, int);
 extern struct sigqueue *sigqueue_alloc(void);
 extern void sigqueue_free(struct sigqueue *);
 extern int send_sigqueue(struct sigqueue *,  struct task_struct *, int group);
@@ -1872,9 +1875,13 @@ extern void set_task_comm(struct task_struct *tsk, char *from);
 extern char *get_task_comm(char *to, struct task_struct *tsk);
 
 #ifdef CONFIG_SMP
-extern void wait_task_inactive(struct task_struct * p);
+extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
 #else
-#define wait_task_inactive(p)	do { } while (0)
+static inline unsigned long wait_task_inactive(struct task_struct *p,
+					       long match_state)
+{
+	return 1;
+}
 #endif
 
 #define next_task(p)	list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks)
@@ -1973,6 +1980,13 @@ static inline unsigned long *end_of_stack(struct task_struct *p)
 
 #endif
 
+static inline int object_is_on_stack(void *obj)
+{
+	void *stack = task_stack_page(current);
+
+	return (obj >= stack) && (obj < (stack + THREAD_SIZE));
+}
+
 extern void thread_info_cache_init(void);
 
 /* set thread flags in other task's structures
@@ -2037,9 +2051,6 @@ static inline int signal_pending_state(long state, struct task_struct *p)
 	if (!signal_pending(p))
 		return 0;
 
-	if (state & (__TASK_STOPPED | __TASK_TRACED))
-		return 0;
-
 	return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
 }
 
@@ -2124,16 +2135,7 @@ static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
 
 #endif /* CONFIG_SMP */
 
-#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
 extern void arch_pick_mmap_layout(struct mm_struct *mm);
-#else
-static inline void arch_pick_mmap_layout(struct mm_struct *mm)
-{
-	mm->mmap_base = TASK_UNMAPPED_BASE;
-	mm->get_unmapped_area = arch_get_unmapped_area;
-	mm->unmap_area = arch_unmap_area;
-}
-#endif
 
 #ifdef CONFIG_TRACING
 extern void
@@ -2181,22 +2183,22 @@ extern long sched_group_rt_period(struct task_group *tg);
 #ifdef CONFIG_TASK_XACCT
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->rchar += amt;
+	tsk->ioac.rchar += amt;
 }
 
 static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
 {
-	tsk->wchar += amt;
+	tsk->ioac.wchar += amt;
 }
 
 static inline void inc_syscr(struct task_struct *tsk)
 {
-	tsk->syscr++;
+	tsk->ioac.syscr++;
 }
 
 static inline void inc_syscw(struct task_struct *tsk)
 {
-	tsk->syscw++;
+	tsk->ioac.syscw++;
 }
 #else
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
@@ -2216,14 +2218,6 @@ static inline void inc_syscw(struct task_struct *tsk)
 }
 #endif
 
-#ifdef CONFIG_SMP
-void migration_init(void);
-#else
-static inline void migration_init(void)
-{
-}
-#endif
-
 #ifndef TASK_SIZE_OF
 #define TASK_SIZE_OF(tsk)	TASK_SIZE
 #endif
diff --git a/include/linux/security.h b/include/linux/security.h
index 31c8851ec5d0..fd96e7f8a6f9 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -102,9 +102,7 @@ extern unsigned long mmap_min_addr;
 #define LSM_SETID_FS	8
 
 /* forward declares to avoid warnings */
-struct nfsctl_arg;
 struct sched_param;
-struct swap_info_struct;
 struct request_sock;
 
 /* bprm_apply_creds unsafe reasons */
@@ -1364,7 +1362,7 @@ struct security_operations {
 			     struct inode *new_dir, struct dentry *new_dentry);
 	int (*inode_readlink) (struct dentry *dentry);
 	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
-	int (*inode_permission) (struct inode *inode, int mask, struct nameidata *nd);
+	int (*inode_permission) (struct inode *inode, int mask);
 	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
 	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
 	void (*inode_delete) (struct inode *inode);
@@ -1630,7 +1628,7 @@ int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry,
 			  struct inode *new_dir, struct dentry *new_dentry);
 int security_inode_readlink(struct dentry *dentry);
 int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd);
-int security_inode_permission(struct inode *inode, int mask, struct nameidata *nd);
+int security_inode_permission(struct inode *inode, int mask);
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
 int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry);
 void security_inode_delete(struct inode *inode);
@@ -2023,8 +2021,7 @@ static inline int security_inode_follow_link(struct dentry *dentry,
 	return 0;
 }
 
-static inline int security_inode_permission(struct inode *inode, int mask,
-					     struct nameidata *nd)
+static inline int security_inode_permission(struct inode *inode, int mask)
 {
 	return 0;
 }
diff --git a/include/linux/sem.h b/include/linux/sem.h
index c8eaad9e4b72..1b191c176bcd 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -78,6 +78,7 @@ struct  seminfo {
 
 #ifdef __KERNEL__
 #include <asm/atomic.h>
+#include <linux/rcupdate.h>
 
 struct task_struct;
 
@@ -93,23 +94,19 @@ struct sem_array {
 	time_t			sem_otime;	/* last semop time */
 	time_t			sem_ctime;	/* last change time */
 	struct sem		*sem_base;	/* ptr to first semaphore in array */
-	struct sem_queue	*sem_pending;	/* pending operations to be processed */
-	struct sem_queue	**sem_pending_last; /* last pending operation */
-	struct sem_undo		*undo;		/* undo requests on this array */
+	struct list_head	sem_pending;	/* pending operations to be processed */
+	struct list_head	list_id;	/* undo requests on this array */
 	unsigned long		sem_nsems;	/* no. of semaphores in array */
 };
 
 /* One queue for each sleeping process in the system. */
 struct sem_queue {
-	struct sem_queue *	next;	 /* next entry in the queue */
-	struct sem_queue **	prev;	 /* previous entry in the queue, *(q->prev) == q */
-	struct task_struct*	sleeper; /* this process */
-	struct sem_undo *	undo;	 /* undo structure */
+	struct list_head	list;	 /* queue of pending operations */
+	struct task_struct	*sleeper; /* this process */
+	struct sem_undo		*undo;	 /* undo structure */
 	int    			pid;	 /* process id of requesting process */
 	int    			status;	 /* completion status of operation */
-	struct sem_array *	sma;	 /* semaphore array for operations */
-	int			id;	 /* internal sem id */
-	struct sembuf *		sops;	 /* array of pending operations */
+	struct sembuf		*sops;	 /* array of pending operations */
 	int			nsops;	 /* number of operations */
 	int			alter;   /* does the operation alter the array? */
 };
@@ -118,8 +115,11 @@ struct sem_queue {
  * when the process exits.
  */
 struct sem_undo {
-	struct sem_undo *	proc_next;	/* next entry on this process */
-	struct sem_undo *	id_next;	/* next entry on this semaphore set */
+	struct list_head	list_proc;	/* per-process list: all undos from one process. */
+						/* rcu protected */
+	struct rcu_head		rcu;		/* rcu struct for sem_undo() */
+	struct sem_undo_list	*ulp;		/* sem_undo_list for the process */
+	struct list_head	list_id;	/* per semaphore array list: all undos for one array */
 	int			semid;		/* semaphore set identifier */
 	short *			semadj;		/* array of adjustments, one per semaphore */
 };
@@ -128,9 +128,9 @@ struct sem_undo {
  * that may be shared among all a CLONE_SYSVSEM task group.
  */ 
 struct sem_undo_list {
-	atomic_t	refcnt;
-	spinlock_t	lock;
-	struct sem_undo	*proc_list;
+	atomic_t		refcnt;
+	spinlock_t		lock;
+	struct list_head	list_proc;
 };
 
 struct sysv_sem {
diff --git a/include/linux/semaphore.h b/include/linux/semaphore.h
index 9cae64b00d6b..7415839ac890 100644
--- a/include/linux/semaphore.h
+++ b/include/linux/semaphore.h
@@ -26,10 +26,8 @@ struct semaphore {
 	.wait_list	= LIST_HEAD_INIT((name).wait_list),		\
 }
 
-#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
-	struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
-
-#define DECLARE_MUTEX(name)	__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX(name)	\
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
 
 static inline void sema_init(struct semaphore *sem, int val)
 {
diff --git a/include/linux/seq_file_net.h b/include/linux/seq_file_net.h
index 4ac52542a563..32c89bbe24a2 100644
--- a/include/linux/seq_file_net.h
+++ b/include/linux/seq_file_net.h
@@ -14,7 +14,10 @@ struct seq_net_private {
 
 int seq_open_net(struct inode *, struct file *,
 		 const struct seq_operations *, int);
+int single_open_net(struct inode *, struct file *file,
+		int (*show)(struct seq_file *, void *));
 int seq_release_net(struct inode *, struct file *);
+int single_release_net(struct inode *, struct file *);
 static inline struct net *seq_file_net(struct seq_file *seq)
 {
 #ifdef CONFIG_NET_NS
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d8f31de632c5..3b2f6c04855e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -59,9 +59,6 @@
 #define PORT_SUNZILOG	38
 #define PORT_SUNSAB	39
 
-/* NEC v850.  */
-#define PORT_V850E_UART	40
-
 /* DEC */
 #define PORT_DZ		46
 #define PORT_ZS		47
@@ -190,6 +187,7 @@ struct uart_ops {
 	void		(*break_ctl)(struct uart_port *, int ctl);
 	int		(*startup)(struct uart_port *);
 	void		(*shutdown)(struct uart_port *);
+	void		(*flush_buffer)(struct uart_port *);
 	void		(*set_termios)(struct uart_port *, struct ktermios *new,
 				       struct ktermios *old);
 	void		(*set_ldisc)(struct uart_port *);
@@ -343,13 +341,15 @@ typedef unsigned int __bitwise__ uif_t;
  * stuff here.
  */
 struct uart_info {
-	struct tty_struct	*tty;
+	struct tty_port		port;
 	struct circ_buf		xmit;
 	uif_t			flags;
 
 /*
  * Definitions for info->flags.  These are _private_ to serial_core, and
  * are specific to this structure.  They may be queried by low level drivers.
+ *
+ * FIXME: use the ASY_ definitions
  */
 #define UIF_CHECK_CD		((__force uif_t) (1 << 25))
 #define UIF_CTS_FLOW		((__force uif_t) (1 << 26))
@@ -357,11 +357,7 @@ struct uart_info {
 #define UIF_INITIALIZED		((__force uif_t) (1 << 31))
 #define UIF_SUSPENDED		((__force uif_t) (1 << 30))
 
-	int			blocked_open;
-
 	struct tasklet_struct	tlet;
-
-	wait_queue_head_t	open_wait;
 	wait_queue_head_t	delta_msr_wait;
 };
 
@@ -438,8 +434,8 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
 #define uart_circ_chars_free(circ)	\
 	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
 
-#define uart_tx_stopped(port)		\
-	((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
+#define uart_tx_stopped(portp)		\
+	((portp)->info->port.tty->stopped || (portp)->info->port.tty->hw_stopped)
 
 /*
  * The following are helper functions for the low level drivers.
@@ -450,7 +446,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
 #ifdef SUPPORT_SYSRQ
 	if (port->sysrq) {
 		if (ch && time_before(jiffies, port->sysrq)) {
-			handle_sysrq(ch, port->info ? port->info->tty : NULL);
+			handle_sysrq(ch, port->info ? port->info->port.tty : NULL);
 			port->sysrq = 0;
 			return 1;
 		}
@@ -479,7 +475,7 @@ static inline int uart_handle_break(struct uart_port *port)
 	}
 #endif
 	if (port->flags & UPF_SAK)
-		do_SAK(info->tty);
+		do_SAK(info->port.tty);
 	return 0;
 }
 
@@ -502,9 +498,9 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status)
 
 	if (info->flags & UIF_CHECK_CD) {
 		if (status)
-			wake_up_interruptible(&info->open_wait);
-		else if (info->tty)
-			tty_hangup(info->tty);
+			wake_up_interruptible(&info->port.open_wait);
+		else if (info->port.tty)
+			tty_hangup(info->port.tty);
 	}
 }
 
@@ -517,7 +513,7 @@ static inline void
 uart_handle_cts_change(struct uart_port *port, unsigned int status)
 {
 	struct uart_info *info = port->info;
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 
 	port->icount.cts++;
 
@@ -543,7 +539,7 @@ static inline void
 uart_insert_char(struct uart_port *port, unsigned int status,
 		 unsigned int overrun, unsigned int ch, unsigned int flag)
 {
-	struct tty_struct *tty = port->info->tty;
+	struct tty_struct *tty = port->info->port.tty;
 
 	if ((status & port->ignore_status_mask & ~overrun) == 0)
 		tty_insert_flip_char(tty, ch, flag);
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 95674d97dabd..25641d9e0ea8 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -87,11 +87,10 @@ void serio_unregister_port(struct serio *serio);
 void serio_unregister_child_port(struct serio *serio);
 
 int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name);
-static inline int serio_register_driver(struct serio_driver *drv)
+static inline int __must_check serio_register_driver(struct serio_driver *drv)
 {
 	return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
 }
-int serio_register_driver(struct serio_driver *drv);
 void serio_unregister_driver(struct serio_driver *drv);
 
 static inline int serio_write(struct serio *serio, unsigned char data)
@@ -175,7 +174,7 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_8042_XL	0x06
 
 /*
- * Serio types
+ * Serio protocols
  */
 #define SERIO_UNKNOWN	0x00
 #define SERIO_MSC	0x01
@@ -212,5 +211,7 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_TAOSEVM	0x34
 #define SERIO_FUJITSU	0x35
 #define SERIO_ZHENHUA	0x36
+#define SERIO_INEXIO	0x37
+#define SERIO_TOUCHIT213	0x37
 
 #endif
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index f2d12d5a21b8..fd83f2584b15 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -43,7 +43,7 @@ static inline struct shmem_inode_info *SHMEM_I(struct inode *inode)
 }
 
 #ifdef CONFIG_TMPFS_POSIX_ACL
-int shmem_permission(struct inode *, int, struct nameidata *);
+int shmem_permission(struct inode *, int);
 int shmem_acl_init(struct inode *, struct inode *);
 void shmem_acl_destroy_inode(struct inode *);
 
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index ea037f28df91..bef0c46d4713 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -8,6 +8,12 @@
 #ifndef _LINUX_SIGNALFD_H
 #define _LINUX_SIGNALFD_H
 
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/* Flags for signalfd4.  */
+#define SFD_CLOEXEC O_CLOEXEC
+#define SFD_NONBLOCK O_NONBLOCK
 
 struct signalfd_siginfo {
 	__u32 ssi_signo;
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 299ec4b31412..cfcc45b3bef0 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -243,9 +243,11 @@ typedef unsigned char *sk_buff_data_t;
  *	@tc_index: Traffic control index
  *	@tc_verd: traffic control verdict
  *	@ndisc_nodetype: router type (from link layer)
+ *	@do_not_encrypt: set to prevent encryption of this frame
  *	@dma_cookie: a cookie to one of several possible DMA operations
  *		done by skb DMA functions
  *	@secmark: security marking
+ *	@vlan_tci: vlan tag control information
  */
 
 struct sk_buff {
@@ -305,9 +307,7 @@ struct sk_buff {
 #endif
 
 	int			iif;
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
 	__u16			queue_mapping;
-#endif
 #ifdef CONFIG_NET_SCHED
 	__u16			tc_index;	/* traffic control index */
 #ifdef CONFIG_NET_CLS_ACT
@@ -317,7 +317,10 @@ struct sk_buff {
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
-	/* 14 bit hole */
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	__u8			do_not_encrypt:1;
+#endif
+	/* 0/13/14 bit hole */
 
 #ifdef CONFIG_NET_DMA
 	dma_cookie_t		dma_cookie;
@@ -328,6 +331,8 @@ struct sk_buff {
 
 	__u32			mark;
 
+	__u16			vlan_tci;
+
 	sk_buff_data_t		transport_header;
 	sk_buff_data_t		network_header;
 	sk_buff_data_t		mac_header;
@@ -1671,25 +1676,17 @@ static inline void skb_init_secmark(struct sk_buff *skb)
 
 static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
 	skb->queue_mapping = queue_mapping;
-#endif
 }
 
 static inline u16 skb_get_queue_mapping(struct sk_buff *skb)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
 	return skb->queue_mapping;
-#else
-	return 0;
-#endif
 }
 
 static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from)
 {
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
 	to->queue_mapping = from->queue_mapping;
-#endif
 }
 
 static inline int skb_is_gso(const struct sk_buff *skb)
@@ -1702,6 +1699,20 @@ static inline int skb_is_gso_v6(const struct sk_buff *skb)
 	return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6;
 }
 
+extern void __skb_warn_lro_forwarding(const struct sk_buff *skb);
+
+static inline bool skb_warn_if_lro(const struct sk_buff *skb)
+{
+	/* LRO sets gso_size but not gso_type, whereas if GSO is really
+	 * wanted then gso_type will be set. */
+	struct skb_shared_info *shinfo = skb_shinfo(skb);
+	if (shinfo->gso_size != 0 && unlikely(shinfo->gso_type == 0)) {
+		__skb_warn_lro_forwarding(skb);
+		return true;
+	}
+	return false;
+}
+
 static inline void skb_forward_csum(struct sk_buff *skb)
 {
 	/* Unfortunately we don't support this one.  Any brave souls? */
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 9aa90a6f20e0..5ff9676c1e2c 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -58,7 +58,7 @@ int slab_is_available(void);
 
 struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
 			unsigned long,
-			void (*)(struct kmem_cache *, void *));
+			void (*)(void *));
 void kmem_cache_destroy(struct kmem_cache *);
 int kmem_cache_shrink(struct kmem_cache *);
 void kmem_cache_free(struct kmem_cache *, void *);
@@ -96,6 +96,7 @@ int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr);
 /*
  * Common kmalloc functions provided by all allocators
  */
+void * __must_check __krealloc(const void *, size_t, gfp_t);
 void * __must_check krealloc(const void *, size_t, gfp_t);
 void kfree(const void *);
 size_t ksize(const void *);
@@ -180,7 +181,7 @@ size_t ksize(const void *);
  */
 static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
 {
-	if (n != 0 && size > ULONG_MAX / n)
+	if (size != 0 && n > ULONG_MAX / size)
 		return NULL;
 	return __kmalloc(n * size, flags | __GFP_ZERO);
 }
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index d117ea2825a9..5bad61a93f65 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -85,7 +85,7 @@ struct kmem_cache {
 	struct kmem_cache_order_objects min;
 	gfp_t allocflags;	/* gfp flags to use on each alloc */
 	int refcount;		/* Refcount for slab cache destroy */
-	void (*ctor)(struct kmem_cache *, void *);
+	void (*ctor)(void *);
 	int inuse;		/* Offset to metadata */
 	int align;		/* Alignment */
 	const char *name;	/* Name (only for display!) */
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index 95c1c39ba445..214f93209b8c 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -46,24 +46,6 @@ extern unsigned long sm501_modify_reg(struct device *dev,
 				      unsigned long set,
 				      unsigned long clear);
 
-/* sm501_gpio_set
- *
- * set the state of the given GPIO line
-*/
-
-extern void sm501_gpio_set(struct device *dev,
-			   unsigned long gpio,
-			   unsigned int to,
-			   unsigned int dir);
-
-/* sm501_gpio_get
- *
- * get the state of the given GPIO line
-*/
-
-extern unsigned long sm501_gpio_get(struct device *dev,
-				    unsigned long gpio);
-
 
 /* Platform data definitions */
 
@@ -73,6 +55,8 @@ extern unsigned long sm501_gpio_get(struct device *dev,
 #define SM501FB_FLAG_USE_HWACCEL	(1<<3)
 #define SM501FB_FLAG_PANEL_NO_FPEN	(1<<4)
 #define SM501FB_FLAG_PANEL_NO_VBIASEN	(1<<5)
+#define SM501FB_FLAG_PANEL_INV_FPEN	(1<<6)
+#define SM501FB_FLAG_PANEL_INV_VBIASEN	(1<<7)
 
 struct sm501_platdata_fbsub {
 	struct fb_videomode	*def_mode;
@@ -102,11 +86,19 @@ struct sm501_platdata_fb {
 	struct sm501_platdata_fbsub	*fb_pnl;
 };
 
-/* gpio i2c */
+/* gpio i2c
+ *
+ * Note, we have to pass in the bus number, as the number used will be
+ * passed to the i2c-gpio driver's platform_device.id, subsequently used
+ * to register the i2c bus.
+*/
 
 struct sm501_platdata_gpio_i2c {
+	unsigned int		bus_num;
 	unsigned int		pin_sda;
 	unsigned int		pin_scl;
+	int			udelay;
+	int			timeout;
 };
 
 /* sm501_initdata
@@ -129,6 +121,7 @@ struct sm501_reg_init {
 #define SM501_USE_FBACCEL	(1<<6)
 #define SM501_USE_AC97		(1<<7)
 #define SM501_USE_I2S		(1<<8)
+#define SM501_USE_GPIO		(1<<9)
 
 #define SM501_USE_ALL		(0xffffffff)
 
@@ -155,6 +148,8 @@ struct sm501_init_gpio {
 	struct sm501_reg_init	gpio_ddr_high;
 };
 
+#define SM501_FLAG_SUSPEND_OFF		(1<<4)
+
 /* sm501_platdata
  *
  * This is passed with the platform device to allow the board
@@ -168,6 +163,12 @@ struct sm501_platdata {
 	struct sm501_init_gpio		*init_gpiop;
 	struct sm501_platdata_fb	*fb;
 
+	int				 flags;
+	int				 gpio_base;
+
+	int	(*get_power)(struct device *dev);
+	int	(*set_power)(struct device *dev, unsigned int on);
+
 	struct sm501_platdata_gpio_i2c	*gpio_i2c;
 	unsigned int			 gpio_i2c_nr;
 };
diff --git a/include/linux/smb_fs.h b/include/linux/smb_fs.h
index 2c5cd55f44ff..923cd8a247b1 100644
--- a/include/linux/smb_fs.h
+++ b/include/linux/smb_fs.h
@@ -43,18 +43,13 @@ static inline struct smb_inode_info *SMB_I(struct inode *inode)
 }
 
 /* macro names are short for word, double-word, long value (?) */
-#define WVAL(buf,pos) \
-	(le16_to_cpu(get_unaligned((__le16 *)((u8 *)(buf) + (pos)))))
-#define DVAL(buf,pos) \
-	(le32_to_cpu(get_unaligned((__le32 *)((u8 *)(buf) + (pos)))))
-#define LVAL(buf,pos) \
-	(le64_to_cpu(get_unaligned((__le64 *)((u8 *)(buf) + (pos)))))
-#define WSET(buf,pos,val) \
-	put_unaligned(cpu_to_le16((u16)(val)), (__le16 *)((u8 *)(buf) + (pos)))
-#define DSET(buf,pos,val) \
-	put_unaligned(cpu_to_le32((u32)(val)), (__le32 *)((u8 *)(buf) + (pos)))
-#define LSET(buf,pos,val) \
-	put_unaligned(cpu_to_le64((u64)(val)), (__le64 *)((u8 *)(buf) + (pos)))
+#define WVAL(buf, pos) (get_unaligned_le16((u8 *)(buf) + (pos)))
+#define DVAL(buf, pos) (get_unaligned_le32((u8 *)(buf) + (pos)))
+#define LVAL(buf, pos) (get_unaligned_le64((u8 *)(buf) + (pos)))
+
+#define WSET(buf, pos, val) put_unaligned_le16((val), (u8 *)(buf) + (pos))
+#define DSET(buf, pos, val) put_unaligned_le32((val), (u8 *)(buf) + (pos))
+#define LSET(buf, pos, val) put_unaligned_le64((val), (u8 *)(buf) + (pos))
 
 /* where to find the base of the SMB packet proper */
 #define smb_base(buf) ((u8 *)(((u8 *)(buf))+4))
diff --git a/include/linux/smc911x.h b/include/linux/smc911x.h
new file mode 100644
index 000000000000..b58f54c24183
--- /dev/null
+++ b/include/linux/smc911x.h
@@ -0,0 +1,12 @@
+#ifndef __SMC911X_H__
+#define __SMC911X_H__
+
+#define SMC911X_USE_16BIT (1 << 0)
+#define SMC911X_USE_32BIT (1 << 1)
+
+struct smc911x_platdata {
+	unsigned long flags;
+	unsigned long irq_flags; /* IRQF_... */
+};
+
+#endif /* __SMC911X_H__ */
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index 8e0556b8781c..3827b922ba1f 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -5,9 +5,19 @@
 #define SMC91X_USE_16BIT (1 << 1)
 #define SMC91X_USE_32BIT (1 << 2)
 
+#define SMC91X_NOWAIT		(1 << 3)
+
+/* two bits for IO_SHIFT, let's hope later designs will keep this sane */
+#define SMC91X_IO_SHIFT_0	(0 << 4)
+#define SMC91X_IO_SHIFT_1	(1 << 4)
+#define SMC91X_IO_SHIFT_2	(2 << 4)
+#define SMC91X_IO_SHIFT_3	(3 << 4)
+#define SMC91X_IO_SHIFT(x)	(((x) >> 4) & 0x3)
+
+#define SMC91X_USE_DMA		(1 << 6)
+
 struct smc91x_platdata {
 	unsigned long flags;
-	unsigned long irq_flags; /* IRQF_... */
 };
 
 #endif /* __SMC91X_H__ */
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 48262f86c969..66484d4a8459 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -74,15 +74,10 @@ void __smp_call_function_single(int cpuid, struct call_single_data *data);
 #ifdef CONFIG_USE_GENERIC_SMP_HELPERS
 void generic_smp_call_function_single_interrupt(void);
 void generic_smp_call_function_interrupt(void);
-void init_call_single_data(void);
 void ipi_call_lock(void);
 void ipi_call_unlock(void);
 void ipi_call_lock_irq(void);
 void ipi_call_unlock_irq(void);
-#else
-static inline void init_call_single_data(void)
-{
-}
 #endif
 
 /*
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 5df62ef1280c..7a6e6bba4a71 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -214,6 +214,8 @@ enum
 	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
 	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
 	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
+	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
+	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/socket.h b/include/linux/socket.h
index bd2b30a74e76..dc5086fe7736 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -189,7 +189,8 @@ struct ucred {
 #define AF_BLUETOOTH	31	/* Bluetooth sockets 		*/
 #define AF_IUCV		32	/* IUCV sockets			*/
 #define AF_RXRPC	33	/* RxRPC sockets 		*/
-#define AF_MAX		34	/* For now.. */
+#define AF_ISDN		34	/* mISDN sockets 		*/
+#define AF_MAX		35	/* For now.. */
 
 /* Protocol families, same as address families. */
 #define PF_UNSPEC	AF_UNSPEC
@@ -225,6 +226,7 @@ struct ucred {
 #define PF_BLUETOOTH	AF_BLUETOOTH
 #define PF_IUCV		AF_IUCV
 #define PF_RXRPC	AF_RXRPC
+#define PF_ISDN		AF_ISDN
 #define PF_MAX		AF_MAX
 
 /* Maximum queue length specifiable by listen.  */
@@ -306,10 +308,10 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata,
 					  int offset, 
 					  unsigned int len, __wsum *csump);
 
-extern int verify_iovec(struct msghdr *m, struct iovec *iov, char *address, int mode);
+extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
 extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
-extern int move_addr_to_user(void *kaddr, int klen, void __user *uaddr, int __user *ulen);
-extern int move_addr_to_kernel(void __user *uaddr, int ulen, void *kaddr);
+extern int move_addr_to_user(struct sockaddr *kaddr, int klen, void __user *uaddr, int __user *ulen);
+extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr);
 extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
 
 #endif
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
index 753680296e17..67ad11fcf88b 100644
--- a/include/linux/sonet.h
+++ b/include/linux/sonet.h
@@ -34,7 +34,7 @@ struct sonet_stats {
 					/* clear error insertion */
 #define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
 					/* query error insertion */
-#define SONET_SETFRAMING _IO('a',ATMIOC_PHYTYP+5)
+#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
 					/* set framing mode (SONET/SDH) */
 #define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
 					/* get framing mode */
diff --git a/include/linux/spi/ds1305.h b/include/linux/spi/ds1305.h
new file mode 100644
index 000000000000..287ec830eab7
--- /dev/null
+++ b/include/linux/spi/ds1305.h
@@ -0,0 +1,35 @@
+#ifndef __LINUX_SPI_DS1305_H
+#define __LINUX_SPI_DS1305_H
+
+/*
+ * One-time configuration for ds1305 and ds1306 RTC chips.
+ *
+ * Put a pointer to this in spi_board_info.platform_data if you want to
+ * be sure that Linux (re)initializes this as needed ... after losing
+ * backup power, and potentially on the first boot.
+ */
+struct ds1305_platform_data {
+
+	/* Trickle charge configuration:  it's OK to leave out the MAGIC
+	 * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
+	 */
+#define DS1305_TRICKLE_MAGIC	0xa0
+#define DS1305_TRICKLE_DS2	0x08	/* two diodes */
+#define DS1305_TRICKLE_DS1	0x04	/* one diode */
+#define DS1305_TRICKLE_2K	0x01	/* 2 KOhm resistance */
+#define DS1305_TRICKLE_4K	0x02	/* 4 KOhm resistance */
+#define DS1305_TRICKLE_8K	0x03	/* 8 KOhm resistance */
+	u8	trickle;
+
+	/* set only on ds1306 parts */
+	bool	is_ds1306;
+
+	/* ds1306 only:  enable 1 Hz output */
+	bool	en_1hz;
+
+	/* REVISIT:  the driver currently expects nINT0 to be wired
+	 * as the alarm IRQ.  ALM1 may also need to be set up ...
+	 */
+};
+
+#endif /* __LINUX_SPI_DS1305_H */
diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h
new file mode 100644
index 000000000000..6dfd83f19b4b
--- /dev/null
+++ b/include/linux/spi/max7301.h
@@ -0,0 +1,9 @@
+#ifndef LINUX_SPI_MAX7301_H
+#define LINUX_SPI_MAX7301_H
+
+struct max7301_platform_data {
+	/* number assigned to the first GPIO */
+	unsigned	base;
+};
+
+#endif
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index 835ddf47d45c..22ef107d7704 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -1,18 +1,25 @@
 
-/* FIXME driver should be able to handle all four slaves that
- * can be hooked up to each chipselect, as well as IRQs...
- */
+/* FIXME driver should be able to handle IRQs...  */
+
+struct mcp23s08_chip_info {
+	bool	is_present;		/* true iff populated */
+	u8	pullups;		/* BIT(x) means enable pullup x */
+};
 
 struct mcp23s08_platform_data {
-	/* four slaves can share one SPI chipselect */
-	u8		slave;
+	/* Four slaves (numbered 0..3) can share one SPI chipselect, and
+	 * will provide 8..32 GPIOs using 1..4 gpio_chip instances.
+	 */
+	struct mcp23s08_chip_info	chip[4];
 
-	/* number assigned to the first GPIO */
+	/* "base" is the number of the first GPIO.  Dynamic assignment is
+	 * not currently supported, and even if there are gaps in chip
+	 * addressing the GPIO numbers are sequential .. so for example
+	 * if only slaves 0 and 3 are present, their GPIOs range from
+	 * base to base+15.
+	 */
 	unsigned	base;
 
-	/* pins with pullups */
-	u8		pullups;
-
 	void		*context;	/* param to setup/teardown */
 
 	int		(*setup)(struct spi_device *spi,
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
new file mode 100644
index 000000000000..b4d9fa6f797c
--- /dev/null
+++ b/include/linux/spi/orion_spi.h
@@ -0,0 +1,17 @@
+/*
+ * orion_spi.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_SPI_ORION_SPI_H
+#define __LINUX_SPI_ORION_SPI_H
+
+struct orion_spi_info {
+	u32	tclk;		/* no <linux/clk.h> support yet */
+};
+
+
+#endif
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 387e428f1cdf..4be01bb44377 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -82,7 +82,7 @@ struct spi_device {
 	int			irq;
 	void			*controller_state;
 	void			*controller_data;
-	const char		*modalias;
+	char			modalias[32];
 
 	/*
 	 * likely need more hooks for more protocol options affecting how
@@ -733,7 +733,7 @@ struct spi_board_info {
 	 * controller_data goes to spi_device.controller_data,
 	 * irq is copied too
 	 */
-	char		modalias[KOBJ_NAME_LEN];
+	char		modalias[32];
 	const void	*platform_data;
 	void		*controller_data;
 	int		irq;
@@ -778,8 +778,20 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_master().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device.  This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
  */
 extern struct spi_device *
+spi_alloc_device(struct spi_master *master);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
+extern struct spi_device *
 spi_new_device(struct spi_master *, struct spi_board_info *);
 
 static inline void
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index d311a090fae7..61e5610ad165 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -46,6 +46,7 @@
  *  linux/spinlock.h:     builds the final spin_*() APIs.
  */
 
+#include <linux/typecheck.h>
 #include <linux/preempt.h>
 #include <linux/linkage.h>
 #include <linux/compiler.h>
@@ -191,23 +192,53 @@ do {								\
 
 #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
 
-#define spin_lock_irqsave(lock, flags)	flags = _spin_lock_irqsave(lock)
-#define read_lock_irqsave(lock, flags)	flags = _read_lock_irqsave(lock)
-#define write_lock_irqsave(lock, flags)	flags = _write_lock_irqsave(lock)
+#define spin_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _spin_lock_irqsave(lock);	\
+	} while (0)
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _read_lock_irqsave(lock);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _write_lock_irqsave(lock);	\
+	} while (0)
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
-#define spin_lock_irqsave_nested(lock, flags, subclass) \
-	flags = _spin_lock_irqsave_nested(lock, subclass)
+#define spin_lock_irqsave_nested(lock, flags, subclass)			\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _spin_lock_irqsave_nested(lock, subclass);	\
+	} while (0)
 #else
-#define spin_lock_irqsave_nested(lock, flags, subclass) \
-	flags = _spin_lock_irqsave(lock)
+#define spin_lock_irqsave_nested(lock, flags, subclass)			\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _spin_lock_irqsave(lock);			\
+	} while (0)
 #endif
 
 #else
 
-#define spin_lock_irqsave(lock, flags)	_spin_lock_irqsave(lock, flags)
-#define read_lock_irqsave(lock, flags)	_read_lock_irqsave(lock, flags)
-#define write_lock_irqsave(lock, flags)	_write_lock_irqsave(lock, flags)
+#define spin_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_spin_lock_irqsave(lock, flags);	\
+	} while (0)
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_read_lock_irqsave(lock, flags);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_write_lock_irqsave(lock, flags);	\
+	} while (0)
 #define spin_lock_irqsave_nested(lock, flags, subclass)	\
 	spin_lock_irqsave(lock, flags)
 
@@ -260,16 +291,25 @@ do {						\
 } while (0)
 #endif
 
-#define spin_unlock_irqrestore(lock, flags) \
-					_spin_unlock_irqrestore(lock, flags)
+#define spin_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_spin_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define spin_unlock_bh(lock)		_spin_unlock_bh(lock)
 
-#define read_unlock_irqrestore(lock, flags) \
-					_read_unlock_irqrestore(lock, flags)
+#define read_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_read_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define read_unlock_bh(lock)		_read_unlock_bh(lock)
 
-#define write_unlock_irqrestore(lock, flags) \
-					_write_unlock_irqrestore(lock, flags)
+#define write_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_write_unlock_irqrestore(lock, flags);	\
+	} while (0)
 #define write_unlock_bh(lock)		_write_unlock_bh(lock)
 
 #define spin_trylock_bh(lock)	__cond_lock(lock, _spin_trylock_bh(lock))
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 50dfd0dc4093..e530026eedf7 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -7,6 +7,7 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/mod_devicetable.h>
+#include <linux/dma-mapping.h>
 
 #include <linux/ssb/ssb_regs.h>
 
@@ -137,9 +138,6 @@ struct ssb_device {
 	const struct ssb_bus_ops *ops;
 
 	struct device *dev;
-	/* Pointer to the device that has to be used for
-	 * any DMA related operation. */
-	struct device *dma_dev;
 
 	struct ssb_bus *bus;
 	struct ssb_device_id id;
@@ -399,13 +397,151 @@ static inline void ssb_block_write(struct ssb_device *dev, const void *buffer,
 #endif /* CONFIG_SSB_BLOCKIO */
 
 
+/* The SSB DMA API. Use this API for any DMA operation on the device.
+ * This API basically is a wrapper that calls the correct DMA API for
+ * the host device type the SSB device is attached to. */
+
 /* Translation (routing) bits that need to be ORed to DMA
  * addresses before they are given to a device. */
 extern u32 ssb_dma_translation(struct ssb_device *dev);
 #define SSB_DMA_TRANSLATION_MASK	0xC0000000
 #define SSB_DMA_TRANSLATION_SHIFT	30
 
-extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask);
+extern int ssb_dma_set_mask(struct ssb_device *dev, u64 mask);
+
+extern void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp_flags);
+extern void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
+				    void *vaddr, dma_addr_t dma_handle,
+				    gfp_t gfp_flags);
+
+static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
+{
+#ifdef CONFIG_SSB_DEBUG
+	printk(KERN_ERR "SSB: BUG! Calling DMA API for "
+	       "unsupported bustype %d\n", dev->bus->bustype);
+#endif /* DEBUG */
+}
+
+static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr)
+{
+	switch (dev->bus->bustype) {
+	case SSB_BUSTYPE_PCI:
+		return pci_dma_mapping_error(dev->bus->host_pci, addr);
+	case SSB_BUSTYPE_SSB:
+		return dma_mapping_error(dev->dev, addr);
+	default:
+		__ssb_dma_not_implemented(dev);
+	}
+	return -ENOSYS;
+}
+
+static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p,
+					    size_t size, enum dma_data_direction dir)
+{
+	switch (dev->bus->bustype) {
+	case SSB_BUSTYPE_PCI:
+		return pci_map_single(dev->bus->host_pci, p, size, dir);
+	case SSB_BUSTYPE_SSB:
+		return dma_map_single(dev->dev, p, size, dir);
+	default:
+		__ssb_dma_not_implemented(dev);
+	}
+	return 0;
+}
+
+static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_addr,
+					size_t size, enum dma_data_direction dir)
+{
+	switch (dev->bus->bustype) {
+	case SSB_BUSTYPE_PCI:
+		pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir);
+		return;
+	case SSB_BUSTYPE_SSB:
+		dma_unmap_single(dev->dev, dma_addr, size, dir);
+		return;
+	default:
+		__ssb_dma_not_implemented(dev);
+	}
+}
+
+static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev,
+					       dma_addr_t dma_addr,
+					       size_t size,
+					       enum dma_data_direction dir)
+{
+	switch (dev->bus->bustype) {
+	case SSB_BUSTYPE_PCI:
+		pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+					    size, dir);
+		return;
+	case SSB_BUSTYPE_SSB:
+		dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir);
+		return;
+	default:
+		__ssb_dma_not_implemented(dev);
+	}
+}
+
+static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev,
+						  dma_addr_t dma_addr,
+						  size_t size,
+						  enum dma_data_direction dir)
+{
+	switch (dev->bus->bustype) {
+	case SSB_BUSTYPE_PCI:
+		pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+					       size, dir);
+		return;
+	case SSB_BUSTYPE_SSB:
+		dma_sync_single_for_device(dev->dev, dma_addr, size, dir);
+		return;
+	default:
+		__ssb_dma_not_implemented(dev);
+	}
+}
+
+static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev,
+						     dma_addr_t dma_addr,
+						     unsigned long offset,
+						     size_t size,
+						     enum dma_data_direction dir)
+{
+	switch (dev->bus->bustype) {
+	case SSB_BUSTYPE_PCI:
+		/* Just sync everything. That's all the PCI API can do. */
+		pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
+					    offset + size, dir);
+		return;
+	case SSB_BUSTYPE_SSB:
+		dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset,
+					      size, dir);
+		return;
+	default:
+		__ssb_dma_not_implemented(dev);
+	}
+}
+
+static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev,
+							dma_addr_t dma_addr,
+							unsigned long offset,
+							size_t size,
+							enum dma_data_direction dir)
+{
+	switch (dev->bus->bustype) {
+	case SSB_BUSTYPE_PCI:
+		/* Just sync everything. That's all the PCI API can do. */
+		pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
+					       offset + size, dir);
+		return;
+	case SSB_BUSTYPE_SSB:
+		dma_sync_single_range_for_device(dev->dev, dma_addr, offset,
+						 size, dir);
+		return;
+	default:
+		__ssb_dma_not_implemented(dev);
+	}
+}
 
 
 #ifdef CONFIG_SSB_PCIHOST
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
index 0424d75a5aaa..336af33c6ea4 100644
--- a/include/linux/stallion.h
+++ b/include/linux/stallion.h
@@ -69,6 +69,7 @@ struct stlrq {
  */
 struct stlport {
 	unsigned long		magic;
+	struct tty_port		port;
 	unsigned int		portnr;
 	unsigned int		panelnr;
 	unsigned int		brdnr;
@@ -76,12 +77,10 @@ struct stlport {
 	int			uartaddr;
 	unsigned int		pagenr;
 	unsigned long		istate;
-	int			flags;
 	int			baud_base;
 	int			custom_divisor;
 	int			close_delay;
 	int			closing_wait;
-	int			refcount;
 	int			openwaitcnt;
 	int			brklen;
 	unsigned int		sigs;
@@ -92,9 +91,6 @@ struct stlport {
 	unsigned long		clk;
 	unsigned long		hwid;
 	void			*uartp;
-	struct tty_struct	*tty;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
 	comstats_t		stats;
 	struct stlrq		tx;
 };
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 5bfc553bdb21..f1cb0ba6d715 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -5,41 +5,43 @@
    (and more).  So the "read" side to such a lock is anything which
    diables preeempt. */
 #include <linux/cpu.h>
+#include <linux/cpumask.h>
 #include <asm/system.h>
 
 #if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
+
+/* Deprecated, but useful for transition. */
+#define ALL_CPUS ~0U
+
 /**
- * stop_machine_run: freeze the machine on all CPUs and run this function
+ * stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
  * @data: the data ptr for the @fn()
- * @cpu: the cpu to run @fn() on (or any, if @cpu == NR_CPUS.
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
- * Description: This causes a thread to be scheduled on every other cpu,
- * each of which disables interrupts, and finally interrupts are disabled
- * on the current CPU.  The result is that noone is holding a spinlock
- * or inside any other preempt-disabled region when @fn() runs.
+ * Description: This causes a thread to be scheduled on every cpu,
+ * each of which disables interrupts.  The result is that noone is
+ * holding a spinlock or inside any other preempt-disabled region when
+ * @fn() runs.
  *
  * This can be thought of as a very heavy write lock, equivalent to
  * grabbing every spinlock in the kernel. */
-int stop_machine_run(int (*fn)(void *), void *data, unsigned int cpu);
+int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus);
 
 /**
- * __stop_machine_run: freeze the machine on all CPUs and run this function
+ * __stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
  * @data: the data ptr for the @fn
- * @cpu: the cpu to run @fn on (or any, if @cpu == NR_CPUS.
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
- * Description: This is a special version of the above, which returns the
- * thread which has run @fn(): kthread_stop will return the return value
- * of @fn().  Used by hotplug cpu.
+ * Description: This is a special version of the above, which assumes cpus
+ * won't come or go while it's being called.  Used by hotplug cpu.
  */
-struct task_struct *__stop_machine_run(int (*fn)(void *), void *data,
-				       unsigned int cpu);
-
+int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus);
 #else
 
-static inline int stop_machine_run(int (*fn)(void *), void *data,
-				   unsigned int cpu)
+static inline int stop_machine(int (*fn)(void *), void *data,
+			       const cpumask_t *cpus)
 {
 	int ret;
 	local_irq_disable();
@@ -48,4 +50,18 @@ static inline int stop_machine_run(int (*fn)(void *), void *data,
 	return ret;
 }
 #endif /* CONFIG_SMP */
+
+static inline int __deprecated stop_machine_run(int (*fn)(void *), void *data,
+						unsigned int cpu)
+{
+	/* If they don't care which cpu fn runs on, just pick one. */
+	if (cpu == NR_CPUS)
+		return stop_machine(fn, data, NULL);
+	else if (cpu == ~0U)
+		return stop_machine(fn, data, &cpu_possible_map);
+	else {
+		cpumask_t cpus = cpumask_of_cpu(cpu);
+		return stop_machine(fn, data, &cpus);
+	}
+}
 #endif /* _LINUX_STOP_MACHINE */
diff --git a/include/linux/string.h b/include/linux/string.h
index efdc44593b52..810d80df0a1d 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -111,5 +111,8 @@ extern void argv_free(char **argv);
 
 extern bool sysfs_streq(const char *s1, const char *s2);
 
+extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+			const void *from, size_t available);
+
 #endif
 #endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/sunrpc/auth_gss.h b/include/linux/sunrpc/auth_gss.h
index fec6899bf355..d48d4e605f74 100644
--- a/include/linux/sunrpc/auth_gss.h
+++ b/include/linux/sunrpc/auth_gss.h
@@ -7,8 +7,6 @@
  * Andy Adamson <andros@umich.edu>
  * Bruce Fields <bfields@umich.edu>
  * Copyright (c) 2000 The Regents of the University of Michigan
- *
- * $Id$
  */
 
 #ifndef _LINUX_SUNRPC_AUTH_GSS_H
diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
index 459c5fc11d51..03f33330ece2 100644
--- a/include/linux/sunrpc/gss_api.h
+++ b/include/linux/sunrpc/gss_api.h
@@ -7,8 +7,6 @@
  * Andy Adamson <andros@umich.edu>
  * Bruce Fields <bfields@umich.edu>
  * Copyright (c) 2000 The Regents of the University of Michigan
- *
- * $Id$
  */
 
 #ifndef _LINUX_SUNRPC_GSS_API_H
diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h
index a10f1fb0bf7c..e7bbdba474d5 100644
--- a/include/linux/sunrpc/gss_krb5.h
+++ b/include/linux/sunrpc/gss_krb5.h
@@ -51,6 +51,9 @@ struct krb5_ctx {
 
 extern spinlock_t krb5_seq_lock;
 
+/* The length of the Kerberos GSS token header */
+#define GSS_KRB5_TOK_HDR_LEN	(16)
+
 #define KG_TOK_MIC_MSG    0x0101
 #define KG_TOK_WRAP_MSG   0x0201
 
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
index 4b54c5fdcfd9..dc69068d94c7 100644
--- a/include/linux/sunrpc/svc.h
+++ b/include/linux/sunrpc/svc.h
@@ -22,7 +22,7 @@
 /*
  * This is the RPC server thread function prototype
  */
-typedef void		(*svc_thread_fn)(struct svc_rqst *);
+typedef int		(*svc_thread_fn)(void *);
 
 /*
  *
@@ -80,7 +80,6 @@ struct svc_serv {
 	struct module *		sv_module;	/* optional module to count when
 						 * adding threads */
 	svc_thread_fn		sv_function;	/* main function for threads */
-	int			sv_kill_signal;	/* signal to kill threads */
 };
 
 /*
@@ -388,8 +387,8 @@ struct svc_rqst *svc_prepare_thread(struct svc_serv *serv,
 					struct svc_pool *pool);
 void		   svc_exit_thread(struct svc_rqst *);
 struct svc_serv *  svc_create_pooled(struct svc_program *, unsigned int,
-			void (*shutdown)(struct svc_serv*),
-			svc_thread_fn, int sig, struct module *);
+			void (*shutdown)(struct svc_serv*), svc_thread_fn,
+			struct module *);
 int		   svc_set_num_threads(struct svc_serv *, struct svc_pool *, int);
 void		   svc_destroy(struct svc_serv *);
 int		   svc_process(struct svc_rqst *);
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index 05eb4664d0dd..ef2e3a20bf3b 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -72,7 +72,7 @@ extern atomic_t rdma_stat_sq_prod;
  */
 struct svc_rdma_op_ctxt {
 	struct svc_rdma_op_ctxt *read_hdr;
-	struct list_head free_list;
+	int hdr_count;
 	struct xdr_buf arg;
 	struct list_head dto_q;
 	enum ib_wr_opcode wr_op;
@@ -86,6 +86,31 @@ struct svc_rdma_op_ctxt {
 	struct page *pages[RPCSVC_MAXPAGES];
 };
 
+/*
+ * NFS_ requests are mapped on the client side by the chunk lists in
+ * the RPCRDMA header. During the fetching of the RPC from the client
+ * and the writing of the reply to the client, the memory in the
+ * client and the memory in the server must be mapped as contiguous
+ * vaddr/len for access by the hardware. These data strucures keep
+ * these mappings.
+ *
+ * For an RDMA_WRITE, the 'sge' maps the RPC REPLY. For RDMA_READ, the
+ * 'sge' in the svc_rdma_req_map maps the server side RPC reply and the
+ * 'ch' field maps the read-list of the RPCRDMA header to the 'sge'
+ * mapping of the reply.
+ */
+struct svc_rdma_chunk_sge {
+	int start;		/* sge no for this chunk */
+	int count;		/* sge count for this chunk */
+};
+struct svc_rdma_req_map {
+	unsigned long count;
+	union {
+		struct kvec sge[RPCSVC_MAXPAGES];
+		struct svc_rdma_chunk_sge ch[RPCSVC_MAXPAGES];
+	};
+};
+
 #define RDMACTXT_F_LAST_CTXT	2
 
 struct svcxprt_rdma {
@@ -93,7 +118,6 @@ struct svcxprt_rdma {
 	struct rdma_cm_id    *sc_cm_id;		/* RDMA connection id */
 	struct list_head     sc_accept_q;	/* Conn. waiting accept */
 	int		     sc_ord;		/* RDMA read limit */
-	wait_queue_head_t    sc_read_wait;
 	int                  sc_max_sge;
 
 	int                  sc_sq_depth;	/* Depth of SQ */
@@ -104,12 +128,8 @@ struct svcxprt_rdma {
 
 	struct ib_pd         *sc_pd;
 
+	atomic_t	     sc_dma_used;
 	atomic_t	     sc_ctxt_used;
-	struct list_head     sc_ctxt_free;
-	int		     sc_ctxt_cnt;
-	int		     sc_ctxt_bump;
-	int		     sc_ctxt_max;
-	spinlock_t	     sc_ctxt_lock;
 	struct list_head     sc_rq_dto_q;
 	spinlock_t	     sc_rq_dto_lock;
 	struct ib_qp         *sc_qp;
@@ -173,6 +193,8 @@ extern int svc_rdma_post_recv(struct svcxprt_rdma *);
 extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *);
 extern struct svc_rdma_op_ctxt *svc_rdma_get_context(struct svcxprt_rdma *);
 extern void svc_rdma_put_context(struct svc_rdma_op_ctxt *, int);
+extern struct svc_rdma_req_map *svc_rdma_get_req_map(void);
+extern void svc_rdma_put_req_map(struct svc_rdma_req_map *);
 extern void svc_sq_reap(struct svcxprt_rdma *);
 extern void svc_rq_reap(struct svcxprt_rdma *);
 extern struct svc_xprt_class svc_rdma_class;
diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h
index 417a1def56db..c9165d9771a8 100644
--- a/include/linux/sunrpc/svcauth_gss.h
+++ b/include/linux/sunrpc/svcauth_gss.h
@@ -3,9 +3,6 @@
  *
  * Bruce Fields <bfields@umich.edu>
  * Copyright (c) 2002 The Regents of the Unviersity of Michigan
- *
- * $Id$
- *
  */
 
 #ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index e8e69159af71..c63435095970 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -278,4 +278,6 @@ static inline void register_nosave_region_late(unsigned long b, unsigned long e)
 }
 #endif
 
+extern struct mutex pm_mutex;
+
 #endif /* _LINUX_SUSPEND_H */
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 0b3377650c85..de40f169a4e4 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -237,7 +237,6 @@ extern struct page *swapin_readahead(swp_entry_t, gfp_t,
 
 /* linux/mm/swapfile.c */
 extern long total_swap_pages;
-extern unsigned int nr_swapfiles;
 extern void si_swapinfo(struct sysinfo *);
 extern swp_entry_t get_swap_page(void);
 extern swp_entry_t get_swap_page_of_type(int);
@@ -254,8 +253,6 @@ extern int can_share_swap_page(struct page *);
 extern int remove_exclusive_swap_page(struct page *);
 struct backing_dev_info;
 
-extern spinlock_t swap_lock;
-
 /* linux/mm/thrash.c */
 extern struct mm_struct * swap_token_mm;
 extern void grab_swap_token(void);
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index 45f6bc82d317..c844a229acc9 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -136,6 +136,7 @@
 #define MGSL_INTERFACE_RTS_EN   0x10
 #define MGSL_INTERFACE_LL       0x20
 #define MGSL_INTERFACE_RL       0x40
+#define MGSL_INTERFACE_MSB_FIRST 0x80
 
 typedef struct _MGSL_PARAMS
 {
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 0522f368f9d7..d6ff145919ca 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -305,6 +305,7 @@ asmlinkage long sys_fcntl64(unsigned int fd,
 #endif
 asmlinkage long sys_dup(unsigned int fildes);
 asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
+asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
 asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on);
 asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd,
 				unsigned long arg);
@@ -409,6 +410,8 @@ asmlinkage long sys_getsockopt(int fd, int level, int optname,
 asmlinkage long sys_bind(int, struct sockaddr __user *, int);
 asmlinkage long sys_connect(int, struct sockaddr __user *, int);
 asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_paccept(int, struct sockaddr __user *, int __user *,
+			    const __user sigset_t *, size_t, int);
 asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
 asmlinkage long sys_send(int, void __user *, size_t, unsigned);
@@ -428,6 +431,7 @@ asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
 asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			fd_set __user *exp, struct timeval __user *tvp);
 asmlinkage long sys_epoll_create(int size);
+asmlinkage long sys_epoll_create1(int flags);
 asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
 				struct epoll_event __user *event);
 asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
@@ -443,7 +447,7 @@ asmlinkage long sys_newuname(struct new_utsname __user *name);
 
 asmlinkage long sys_getrlimit(unsigned int resource,
 				struct rlimit __user *rlim);
-#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64) || defined(CONFIG_V850))
+#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64))
 asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim);
 #endif
 asmlinkage long sys_setrlimit(unsigned int resource,
@@ -543,6 +547,7 @@ asmlinkage long sys_get_mempolicy(int __user *policy,
 				unsigned long addr, unsigned long flags);
 
 asmlinkage long sys_inotify_init(void);
+asmlinkage long sys_inotify_init1(int flags);
 asmlinkage long sys_inotify_add_watch(int fd, const char __user *path,
 					u32 mask);
 asmlinkage long sys_inotify_rm_watch(int fd, u32 wd);
@@ -608,12 +613,14 @@ asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
 				    size_t len);
 asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache);
 asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask);
+asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask, size_t sizemask, int flags);
 asmlinkage long sys_timerfd_create(int clockid, int flags);
 asmlinkage long sys_timerfd_settime(int ufd, int flags,
 				    const struct itimerspec __user *utmr,
 				    struct itimerspec __user *otmr);
 asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr);
 asmlinkage long sys_eventfd(unsigned int count);
+asmlinkage long sys_eventfd2(unsigned int count, int flags);
 asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 24141b4d1a11..d0437f36921f 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -947,6 +947,22 @@ struct ctl_table;
 struct nsproxy;
 struct ctl_table_root;
 
+struct ctl_table_set {
+	struct list_head list;
+	struct ctl_table_set *parent;
+	int (*is_seen)(struct ctl_table_set *);
+};
+
+extern void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_set *parent,
+	int (*is_seen)(struct ctl_table_set *));
+
+struct ctl_table_header;
+
+extern void sysctl_head_get(struct ctl_table_header *);
+extern void sysctl_head_put(struct ctl_table_header *);
+extern int sysctl_is_seen(struct ctl_table_header *);
+extern struct ctl_table_header *sysctl_head_grab(struct ctl_table_header *);
 extern struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev);
 extern struct ctl_table_header *__sysctl_head_next(struct nsproxy *namespaces,
 						struct ctl_table_header *prev);
@@ -1049,8 +1065,8 @@ struct ctl_table
 
 struct ctl_table_root {
 	struct list_head root_list;
-	struct list_head header_list;
-	struct list_head *(*lookup)(struct ctl_table_root *root,
+	struct ctl_table_set default_set;
+	struct ctl_table_set *(*lookup)(struct ctl_table_root *root,
 					   struct nsproxy *namespaces);
 	int (*permissions)(struct ctl_table_root *root,
 			struct nsproxy *namespaces, struct ctl_table *table);
@@ -1063,9 +1079,14 @@ struct ctl_table_header
 	struct ctl_table *ctl_table;
 	struct list_head ctl_entry;
 	int used;
+	int count;
 	struct completion *unregistering;
 	struct ctl_table *ctl_table_arg;
 	struct ctl_table_root *root;
+	struct ctl_table_set *set;
+	struct ctl_table *attached_by;
+	struct ctl_table *attached_to;
+	struct ctl_table_header *parent;
 };
 
 /* struct ctl_path describes where in the hierarchy a table is added */
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index f2767bc6b735..f395bb3fa2f2 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -99,8 +99,9 @@ extern void sysdev_unregister(struct sys_device *);
 
 struct sysdev_attribute { 
 	struct attribute	attr;
-	ssize_t (*show)(struct sys_device *, char *);
-	ssize_t (*store)(struct sys_device *, const char *, size_t);
+	ssize_t (*show)(struct sys_device *, struct sysdev_attribute *, char *);
+	ssize_t (*store)(struct sys_device *, struct sysdev_attribute *,
+			 const char *, size_t);
 };
 
 
@@ -118,4 +119,38 @@ struct sysdev_attribute {
 extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *);
 extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *);
 
+struct sysdev_ext_attribute {
+	struct sysdev_attribute attr;
+	void *var;
+};
+
+/*
+ * Support for simple variable sysdev attributes.
+ * The pointer to the variable is stored in a sysdev_ext_attribute
+ */
+
+/* Add more types as needed */
+
+extern ssize_t sysdev_show_ulong(struct sys_device *, struct sysdev_attribute *,
+				char *);
+extern ssize_t sysdev_store_ulong(struct sys_device *,
+			struct sysdev_attribute *, const char *, size_t);
+extern ssize_t sysdev_show_int(struct sys_device *, struct sysdev_attribute *,
+				char *);
+extern ssize_t sysdev_store_int(struct sys_device *,
+			struct sysdev_attribute *, const char *, size_t);
+
+#define _SYSDEV_ULONG_ATTR(_name, _mode, _var)				\
+	{ _SYSDEV_ATTR(_name, _mode, sysdev_show_ulong, sysdev_store_ulong), \
+	  &(_var) }
+#define SYSDEV_ULONG_ATTR(_name, _mode, _var)			\
+	struct sysdev_ext_attribute attr_##_name = 		\
+		_SYSDEV_ULONG_ATTR(_name, _mode, _var);
+#define _SYSDEV_INT_ATTR(_name, _mode, _var)				\
+	{ _SYSDEV_ATTR(_name, _mode, sysdev_show_int, sysdev_store_int), \
+	  &(_var) }
+#define SYSDEV_INT_ATTR(_name, _mode, _var)			\
+	struct sysdev_ext_attribute attr_##_name = 		\
+		_SYSDEV_INT_ATTR(_name, _mode, _var);
+
 #endif /* _SYSDEV_H_ */
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 7858eac40aa7..37fa24152bd8 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -101,6 +101,9 @@ void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr);
 
 int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target,
 				   const char *name);
+int __must_check sysfs_create_link_nowarn(struct kobject *kobj,
+					  struct kobject *target,
+					  const char *name);
 void sysfs_remove_link(struct kobject *kobj, const char *name);
 
 int __must_check sysfs_create_group(struct kobject *kobj,
@@ -180,6 +183,13 @@ static inline int sysfs_create_link(struct kobject *kobj,
 	return 0;
 }
 
+static inline int sysfs_create_link_nowarn(struct kobject *kobj,
+					   struct kobject *target,
+					   const char *name)
+{
+	return 0;
+}
+
 static inline void sysfs_remove_link(struct kobject *kobj, const char *name)
 {
 }
diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h
index 44d00e9cceea..5e88afc9a2fb 100644
--- a/include/linux/task_io_accounting.h
+++ b/include/linux/task_io_accounting.h
@@ -8,8 +8,19 @@
  * Blame akpm@osdl.org for all this.
  */
 
-#ifdef CONFIG_TASK_IO_ACCOUNTING
 struct task_io_accounting {
+#ifdef CONFIG_TASK_XACCT
+	/* bytes read */
+	u64 rchar;
+	/*  bytes written */
+	u64 wchar;
+	/* # of read syscalls */
+	u64 syscr;
+	/* # of write syscalls */
+	u64 syscw;
+#endif /* CONFIG_TASK_XACCT */
+
+#ifdef CONFIG_TASK_IO_ACCOUNTING
 	/*
 	 * The number of bytes which this task has caused to be read from
 	 * storage.
@@ -30,8 +41,5 @@ struct task_io_accounting {
 	 * information loss in doing that.
 	 */
 	u64 cancelled_write_bytes;
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
 };
-#else
-struct task_io_accounting {
-};
-#endif
diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h
index ff46c6fad79d..4d090f9ee608 100644
--- a/include/linux/task_io_accounting_ops.h
+++ b/include/linux/task_io_accounting_ops.h
@@ -40,9 +40,17 @@ static inline void task_io_account_cancelled_write(size_t bytes)
 	current->ioac.cancelled_write_bytes += bytes;
 }
 
-static inline void task_io_accounting_init(struct task_struct *tsk)
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
 {
-	memset(&tsk->ioac, 0, sizeof(tsk->ioac));
+	memset(ioac, 0, sizeof(*ioac));
+}
+
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	dst->read_bytes += src->read_bytes;
+	dst->write_bytes += src->write_bytes;
+	dst->cancelled_write_bytes += src->cancelled_write_bytes;
 }
 
 #else
@@ -69,9 +77,37 @@ static inline void task_io_account_cancelled_write(size_t bytes)
 {
 }
 
-static inline void task_io_accounting_init(struct task_struct *tsk)
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
+{
+}
+
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
 {
 }
 
-#endif		/* CONFIG_TASK_IO_ACCOUNTING */
-#endif		/* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
+
+#ifdef CONFIG_TASK_XACCT
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	dst->rchar += src->rchar;
+	dst->wchar += src->wchar;
+	dst->syscr += src->syscr;
+	dst->syscw += src->syscw;
+}
+#else
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+}
+#endif /* CONFIG_TASK_XACCT */
+
+static inline void task_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	task_chr_io_accounting_add(dst, src);
+	task_blk_io_accounting_add(dst, src);
+}
+#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
index 5d69c0744fff..18269e956a71 100644
--- a/include/linux/taskstats.h
+++ b/include/linux/taskstats.h
@@ -31,7 +31,7 @@
  */
 
 
-#define TASKSTATS_VERSION	6
+#define TASKSTATS_VERSION	7
 #define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
 					 * in linux/sched.h */
 
@@ -157,6 +157,10 @@ struct taskstats {
 	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
 	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
 	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
 };
 
 
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index b31b6b74aa28..2e2557388e36 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -224,6 +224,12 @@ struct tcp_options_received {
 	u16	mss_clamp;	/* Maximal mss, negotiated at connection setup */
 };
 
+/* This is the max number of SACKS that we'll generate and process. It's safe
+ * to increse this, although since:
+ *   size = TCPOLEN_SACK_BASE_ALIGNED (4) + n * TCPOLEN_SACK_PERBLOCK (8)
+ * only four options will fit in a standard TCP header */
+#define TCP_NUM_SACKS 4
+
 struct tcp_request_sock {
 	struct inet_request_sock 	req;
 #ifdef CONFIG_TCP_MD5SIG
@@ -291,10 +297,9 @@ struct tcp_sock {
 	u32	rcv_ssthresh;	/* Current window clamp			*/
 
 	u32	frto_highmark;	/* snd_nxt when RTO occurred */
-	u8	reordering;	/* Packet reordering metric.		*/
+	u16	advmss;		/* Advertised MSS			*/
 	u8	frto_counter;	/* Number of new acks after RTO */
 	u8	nonagle;	/* Disable Nagle algorithm?             */
-	u8	keepalive_probes; /* num of allowed keep alive probes	*/
 
 /* RTT measurement */
 	u32	srtt;		/* smoothed round trip time << 3	*/
@@ -305,6 +310,10 @@ struct tcp_sock {
 
 	u32	packets_out;	/* Packets which are "in flight"	*/
 	u32	retrans_out;	/* Retransmitted packets out		*/
+
+	u16	urg_data;	/* Saved octet of OOB data and control flags */
+	u8	urg_mode;	/* In urgent mode		*/
+	u8	ecn_flags;	/* ECN status bits.			*/
 /*
  *      Options received (usually on last packet, some only on SYN packets).
  */
@@ -320,13 +329,24 @@ struct tcp_sock {
 	u32	snd_cwnd_used;
 	u32	snd_cwnd_stamp;
 
-	struct sk_buff_head	out_of_order_queue; /* Out of order segments go here */
-
  	u32	rcv_wnd;	/* Current receiver window		*/
 	u32	write_seq;	/* Tail(+1) of data held in tcp send buffer */
 	u32	pushed_seq;	/* Last pushed seq, required to talk to windows */
+	u32	lost_out;	/* Lost packets			*/
+	u32	sacked_out;	/* SACK'd packets			*/
+	u32	fackets_out;	/* FACK'd packets			*/
+	u32	tso_deferred;
+	u32	bytes_acked;	/* Appropriate Byte Counting - RFC3465 */
 
-/*	SACKs data	*/
+	/* from STCP, retrans queue hinting */
+	struct sk_buff* lost_skb_hint;
+	struct sk_buff *scoreboard_skb_hint;
+	struct sk_buff *retransmit_skb_hint;
+	struct sk_buff *forward_skb_hint;
+
+	struct sk_buff_head	out_of_order_queue; /* Out of order segments go here */
+
+	/* SACKs data, these 2 need to be together (see tcp_build_and_update_options) */
 	struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */
 	struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/
 
@@ -337,23 +357,14 @@ struct tcp_sock {
 					 * sacked_out > 0)
 					 */
 
-	/* from STCP, retrans queue hinting */
-	struct sk_buff* lost_skb_hint;
-
-	struct sk_buff *scoreboard_skb_hint;
-	struct sk_buff *retransmit_skb_hint;
-	struct sk_buff *forward_skb_hint;
-
 	int     lost_cnt_hint;
 	int     retransmit_cnt_hint;
 
 	u32	lost_retrans_low;	/* Sent seq after any rxmit (lowest) */
 
-	u16	advmss;		/* Advertised MSS			*/
+	u8	reordering;	/* Packet reordering metric.		*/
+	u8	keepalive_probes; /* num of allowed keep alive probes	*/
 	u32	prior_ssthresh; /* ssthresh saved at recovery start	*/
-	u32	lost_out;	/* Lost packets			*/
-	u32	sacked_out;	/* SACK'd packets			*/
-	u32	fackets_out;	/* FACK'd packets			*/
 	u32	high_seq;	/* snd_nxt at onset of congestion	*/
 
 	u32	retrans_stamp;	/* Timestamp of the last retransmit,
@@ -361,23 +372,16 @@ struct tcp_sock {
 				 * the first SYN. */
 	u32	undo_marker;	/* tracking retrans started here. */
 	int	undo_retrans;	/* number of undoable retransmissions. */
+	u32	total_retrans;	/* Total retransmits for entire connection */
+
 	u32	urg_seq;	/* Seq of received urgent pointer */
-	u16	urg_data;	/* Saved octet of OOB data and control flags */
-	u8	urg_mode;	/* In urgent mode		*/
-	u8	ecn_flags;	/* ECN status bits.			*/
 	u32	snd_up;		/* Urgent pointer		*/
 
-	u32	total_retrans;	/* Total retransmits for entire connection */
-	u32	bytes_acked;	/* Appropriate Byte Counting - RFC3465 */
-
 	unsigned int		keepalive_time;	  /* time before keep alive takes place */
 	unsigned int		keepalive_intvl;  /* time interval between keep alive probes */
-	int			linger2;
 
 	unsigned long last_synq_overflow; 
 
-	u32	tso_deferred;
-
 /* Receiver side RTT estimation */
 	struct {
 		u32	rtt;
@@ -405,6 +409,8 @@ struct tcp_sock {
 /* TCP MD5 Signagure Option information */
 	struct tcp_md5sig_info	*md5sig_info;
 #endif
+
+	int			linger2;
 };
 
 static inline struct tcp_sock *tcp_sk(const struct sock *sk)
diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h
index 6f371f24160b..d9a85d616385 100644
--- a/include/linux/textsearch.h
+++ b/include/linux/textsearch.h
@@ -10,10 +10,8 @@
 
 struct ts_config;
 
-/**
- * TS_AUTOLOAD - Automatically load textsearch modules when needed
- */
-#define TS_AUTOLOAD	1
+#define TS_AUTOLOAD	1 /* Automatically load textsearch modules when needed */
+#define TS_IGNORECASE	2 /* Searches string case insensitively */
 
 /**
  * struct ts_state - search state
@@ -39,7 +37,7 @@ struct ts_state
 struct ts_ops
 {
 	const char		*name;
-	struct ts_config *	(*init)(const void *, unsigned int, gfp_t);
+	struct ts_config *	(*init)(const void *, unsigned int, gfp_t, int);
 	unsigned int		(*find)(struct ts_config *,
 					struct ts_state *);
 	void			(*destroy)(struct ts_config *);
@@ -52,12 +50,14 @@ struct ts_ops
 /**
  * struct ts_config - search configuration
  * @ops: operations of chosen algorithm
+ * @flags: flags
  * @get_next_block: callback to fetch the next block to search in
  * @finish: callback to finalize a search
  */
 struct ts_config
 {
 	struct ts_ops		*ops;
+	int 			flags;
 
 	/**
 	 * get_next_block - fetch next block of data
@@ -162,11 +162,10 @@ static inline struct ts_config *alloc_ts_config(size_t payload,
 {
 	struct ts_config *conf;
 
-	conf = kmalloc(TS_PRIV_ALIGN(sizeof(*conf)) + payload, gfp_mask);
+	conf = kzalloc(TS_PRIV_ALIGN(sizeof(*conf)) + payload, gfp_mask);
 	if (conf == NULL)
 		return ERR_PTR(-ENOMEM);
 
-	memset(conf, 0, TS_PRIV_ALIGN(sizeof(*conf)) + payload);
 	return conf;
 }
 
diff --git a/include/linux/tick.h b/include/linux/tick.h
index a881c652f7e9..d3c02695dc5d 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -49,6 +49,7 @@ struct tick_sched {
 	unsigned long			check_clocks;
 	enum tick_nohz_mode		nohz_mode;
 	ktime_t				idle_tick;
+	int				inidle;
 	int				tick_stopped;
 	unsigned long			idle_jiffies;
 	unsigned long			idle_calls;
@@ -105,14 +106,14 @@ static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
 #endif /* !CONFIG_GENERIC_CLOCKEVENTS */
 
 # ifdef CONFIG_NO_HZ
-extern void tick_nohz_stop_sched_tick(void);
+extern void tick_nohz_stop_sched_tick(int inidle);
 extern void tick_nohz_restart_sched_tick(void);
 extern void tick_nohz_update_jiffies(void);
 extern ktime_t tick_nohz_get_sleep_length(void);
 extern void tick_nohz_stop_idle(int cpu);
 extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time);
 # else
-static inline void tick_nohz_stop_sched_tick(void) { }
+static inline void tick_nohz_stop_sched_tick(int inidle) { }
 static inline void tick_nohz_restart_sched_tick(void) { }
 static inline void tick_nohz_update_jiffies(void) { }
 static inline ktime_t tick_nohz_get_sleep_length(void)
diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h
index cf2b10d75731..86cb0501d3e2 100644
--- a/include/linux/timerfd.h
+++ b/include/linux/timerfd.h
@@ -8,9 +8,15 @@
 #ifndef _LINUX_TIMERFD_H
 #define _LINUX_TIMERFD_H
 
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
 
+/* Flags for timerfd_settime.  */
 #define TFD_TIMER_ABSTIME (1 << 0)
 
+/* Flags for timerfd_create.  */
+#define TFD_CLOEXEC O_CLOEXEC
+#define TFD_NONBLOCK O_NONBLOCK
 
 
 #endif /* _LINUX_TIMERFD_H */
diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h
index b0c916d1f375..2bc6fa4adeb5 100644
--- a/include/linux/tipc_config.h
+++ b/include/linux/tipc_config.h
@@ -2,7 +2,7 @@
  * include/linux/tipc_config.h: Include file for TIPC configuration interface
  * 
  * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
+ * Copyright (c) 2005-2007, Wind River Systems
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -136,6 +136,14 @@
 #define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */
 
 /*
+ * Reserved commands:
+ * May not be issued by any process.
+ * Used internally by TIPC.
+ */
+
+#define  TIPC_CMD_NOT_NET_ADMIN     0xC001    /* tx none, rx none */
+
+/*
  * TLV types defined for TIPC
  */
 
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
new file mode 100644
index 000000000000..b48d81969574
--- /dev/null
+++ b/include/linux/tracehook.h
@@ -0,0 +1,582 @@
+/*
+ * Tracing hooks
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file defines hook entry points called by core code where
+ * user tracing/debugging support might need to do something.  These
+ * entry points are called tracehook_*().  Each hook declared below
+ * has a detailed kerneldoc comment giving the context (locking et
+ * al) from which it is called, and the meaning of its return value.
+ *
+ * Each function here typically has only one call site, so it is ok
+ * to have some nontrivial tracehook_*() inlines.  In all cases, the
+ * fast path when no tracing is enabled should be very short.
+ *
+ * The purpose of this file and the tracehook_* layer is to consolidate
+ * the interface that the kernel core and arch code uses to enable any
+ * user debugging or tracing facility (such as ptrace).  The interfaces
+ * here are carefully documented so that maintainers of core and arch
+ * code do not need to think about the implementation details of the
+ * tracing facilities.  Likewise, maintainers of the tracing code do not
+ * need to understand all the calling core or arch code in detail, just
+ * documented circumstances of each call, such as locking conditions.
+ *
+ * If the calling core code changes so that locking is different, then
+ * it is ok to change the interface documented here.  The maintainer of
+ * core code changing should notify the maintainers of the tracing code
+ * that they need to work out the change.
+ *
+ * Some tracehook_*() inlines take arguments that the current tracing
+ * implementations might not necessarily use.  These function signatures
+ * are chosen to pass in all the information that is on hand in the
+ * caller and might conceivably be relevant to a tracer, so that the
+ * core code won't have to be updated when tracing adds more features.
+ * If a call site changes so that some of those parameters are no longer
+ * already on hand without extra work, then the tracehook_* interface
+ * can change so there is no make-work burden on the core code.  The
+ * maintainer of core code changing should notify the maintainers of the
+ * tracing code that they need to work out the change.
+ */
+
+#ifndef _LINUX_TRACEHOOK_H
+#define _LINUX_TRACEHOOK_H	1
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/security.h>
+struct linux_binprm;
+
+/**
+ * tracehook_expect_breakpoints - guess if task memory might be touched
+ * @task:		current task, making a new mapping
+ *
+ * Return nonzero if @task is expected to want breakpoint insertion in
+ * its memory at some point.  A zero return is no guarantee it won't
+ * be done, but this is a hint that it's known to be likely.
+ *
+ * May be called with @task->mm->mmap_sem held for writing.
+ */
+static inline int tracehook_expect_breakpoints(struct task_struct *task)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
+/*
+ * ptrace report for syscall entry and exit looks identical.
+ */
+static inline void ptrace_report_syscall(struct pt_regs *regs)
+{
+	int ptrace = task_ptrace(current);
+
+	if (!(ptrace & PT_PTRACED))
+		return;
+
+	ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+/**
+ * tracehook_report_syscall_entry - task is about to attempt a system call
+ * @regs:		user register state of current task
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just entered the kernel for a system call.
+ * Full user register state is available here.  Changing the values
+ * in @regs can affect the system call number and arguments to be tried.
+ * It is safe to block here, preventing the system call from beginning.
+ *
+ * Returns zero normally, or nonzero if the calling arch code should abort
+ * the system call.  That must prevent normal entry so no system call is
+ * made.  If @task ever returns to user mode after this, its register state
+ * is unspecified, but should be something harmless like an %ENOSYS error
+ * return.  It should preserve enough information so that syscall_rollback()
+ * can work (see asm-generic/syscall.h).
+ *
+ * Called without locks, just after entering kernel mode.
+ */
+static inline __must_check int tracehook_report_syscall_entry(
+	struct pt_regs *regs)
+{
+	ptrace_report_syscall(regs);
+	return 0;
+}
+
+/**
+ * tracehook_report_syscall_exit - task has just finished a system call
+ * @regs:		user register state of current task
+ * @step:		nonzero if simulating single-step or block-step
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just finished an attempted system call.  Full
+ * user register state is available here.  It is safe to block here,
+ * preventing signals from being processed.
+ *
+ * If @step is nonzero, this report is also in lieu of the normal
+ * trap that would follow the system call instruction because
+ * user_enable_block_step() or user_enable_single_step() was used.
+ * In this case, %TIF_SYSCALL_TRACE might not be set.
+ *
+ * Called without locks, just before checking for pending signals.
+ */
+static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
+{
+	ptrace_report_syscall(regs);
+}
+
+/**
+ * tracehook_unsafe_exec - check for exec declared unsafe due to tracing
+ * @task:		current task doing exec
+ *
+ * Return %LSM_UNSAFE_* bits applied to an exec because of tracing.
+ *
+ * Called with task_lock() held on @task.
+ */
+static inline int tracehook_unsafe_exec(struct task_struct *task)
+{
+	int unsafe = 0;
+	int ptrace = task_ptrace(task);
+	if (ptrace & PT_PTRACED) {
+		if (ptrace & PT_PTRACE_CAP)
+			unsafe |= LSM_UNSAFE_PTRACE_CAP;
+		else
+			unsafe |= LSM_UNSAFE_PTRACE;
+	}
+	return unsafe;
+}
+
+/**
+ * tracehook_tracer_task - return the task that is tracing the given task
+ * @tsk:		task to consider
+ *
+ * Returns NULL if noone is tracing @task, or the &struct task_struct
+ * pointer to its tracer.
+ *
+ * Must called under rcu_read_lock().  The pointer returned might be kept
+ * live only by RCU.  During exec, this may be called with task_lock()
+ * held on @task, still held from when tracehook_unsafe_exec() was called.
+ */
+static inline struct task_struct *tracehook_tracer_task(struct task_struct *tsk)
+{
+	if (task_ptrace(tsk) & PT_PTRACED)
+		return rcu_dereference(tsk->parent);
+	return NULL;
+}
+
+/**
+ * tracehook_report_exec - a successful exec was completed
+ * @fmt:		&struct linux_binfmt that performed the exec
+ * @bprm:		&struct linux_binprm containing exec details
+ * @regs:		user-mode register state
+ *
+ * An exec just completed, we are shortly going to return to user mode.
+ * The freshly initialized register state can be seen and changed in @regs.
+ * The name, file and other pointers in @bprm are still on hand to be
+ * inspected, but will be freed as soon as this returns.
+ *
+ * Called with no locks, but with some kernel resources held live
+ * and a reference on @fmt->module.
+ */
+static inline void tracehook_report_exec(struct linux_binfmt *fmt,
+					 struct linux_binprm *bprm,
+					 struct pt_regs *regs)
+{
+	if (!ptrace_event(PT_TRACE_EXEC, PTRACE_EVENT_EXEC, 0) &&
+	    unlikely(task_ptrace(current) & PT_PTRACED))
+		send_sig(SIGTRAP, current, 0);
+}
+
+/**
+ * tracehook_report_exit - task has begun to exit
+ * @exit_code:		pointer to value destined for @current->exit_code
+ *
+ * @exit_code points to the value passed to do_exit(), which tracing
+ * might change here.  This is almost the first thing in do_exit(),
+ * before freeing any resources or setting the %PF_EXITING flag.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_exit(long *exit_code)
+{
+	ptrace_event(PT_TRACE_EXIT, PTRACE_EVENT_EXIT, *exit_code);
+}
+
+/**
+ * tracehook_prepare_clone - prepare for new child to be cloned
+ * @clone_flags:	%CLONE_* flags from clone/fork/vfork system call
+ *
+ * This is called before a new user task is to be cloned.
+ * Its return value will be passed to tracehook_finish_clone().
+ *
+ * Called with no locks held.
+ */
+static inline int tracehook_prepare_clone(unsigned clone_flags)
+{
+	if (clone_flags & CLONE_UNTRACED)
+		return 0;
+
+	if (clone_flags & CLONE_VFORK) {
+		if (current->ptrace & PT_TRACE_VFORK)
+			return PTRACE_EVENT_VFORK;
+	} else if ((clone_flags & CSIGNAL) != SIGCHLD) {
+		if (current->ptrace & PT_TRACE_CLONE)
+			return PTRACE_EVENT_CLONE;
+	} else if (current->ptrace & PT_TRACE_FORK)
+		return PTRACE_EVENT_FORK;
+
+	return 0;
+}
+
+/**
+ * tracehook_finish_clone - new child created and being attached
+ * @child:		new child task
+ * @clone_flags:	%CLONE_* flags from clone/fork/vfork system call
+ * @trace:		return value from tracehook_prepare_clone()
+ *
+ * This is called immediately after adding @child to its parent's children list.
+ * The @trace value is that returned by tracehook_prepare_clone().
+ *
+ * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
+ */
+static inline void tracehook_finish_clone(struct task_struct *child,
+					  unsigned long clone_flags, int trace)
+{
+	ptrace_init_task(child, (clone_flags & CLONE_PTRACE) || trace);
+}
+
+/**
+ * tracehook_report_clone - in parent, new child is about to start running
+ * @trace:		return value from tracehook_prepare_clone()
+ * @regs:		parent's user register state
+ * @clone_flags:	flags from parent's system call
+ * @pid:		new child's PID in the parent's namespace
+ * @child:		new child task
+ *
+ * Called after a child is set up, but before it has been started
+ * running.  @trace is the value returned by tracehook_prepare_clone().
+ * This is not a good place to block, because the child has not started
+ * yet.  Suspend the child here if desired, and then block in
+ * tracehook_report_clone_complete().  This must prevent the child from
+ * self-reaping if tracehook_report_clone_complete() uses the @child
+ * pointer; otherwise it might have died and been released by the time
+ * tracehook_report_report_clone_complete() is called.
+ *
+ * Called with no locks held, but the child cannot run until this returns.
+ */
+static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
+					  unsigned long clone_flags,
+					  pid_t pid, struct task_struct *child)
+{
+	if (unlikely(trace) || unlikely(clone_flags & CLONE_PTRACE)) {
+		/*
+		 * The child starts up with an immediate SIGSTOP.
+		 */
+		sigaddset(&child->pending.signal, SIGSTOP);
+		set_tsk_thread_flag(child, TIF_SIGPENDING);
+	}
+}
+
+/**
+ * tracehook_report_clone_complete - new child is running
+ * @trace:		return value from tracehook_prepare_clone()
+ * @regs:		parent's user register state
+ * @clone_flags:	flags from parent's system call
+ * @pid:		new child's PID in the parent's namespace
+ * @child:		child task, already running
+ *
+ * This is called just after the child has started running.  This is
+ * just before the clone/fork syscall returns, or blocks for vfork
+ * child completion if @clone_flags has the %CLONE_VFORK bit set.
+ * The @child pointer may be invalid if a self-reaping child died and
+ * tracehook_report_clone() took no action to prevent it from self-reaping.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_clone_complete(int trace,
+						   struct pt_regs *regs,
+						   unsigned long clone_flags,
+						   pid_t pid,
+						   struct task_struct *child)
+{
+	if (unlikely(trace))
+		ptrace_event(0, trace, pid);
+}
+
+/**
+ * tracehook_report_vfork_done - vfork parent's child has exited or exec'd
+ * @child:		child task, already running
+ * @pid:		new child's PID in the parent's namespace
+ *
+ * Called after a %CLONE_VFORK parent has waited for the child to complete.
+ * The clone/vfork system call will return immediately after this.
+ * The @child pointer may be invalid if a self-reaping child died and
+ * tracehook_report_clone() took no action to prevent it from self-reaping.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_report_vfork_done(struct task_struct *child,
+					       pid_t pid)
+{
+	ptrace_event(PT_TRACE_VFORK_DONE, PTRACE_EVENT_VFORK_DONE, pid);
+}
+
+/**
+ * tracehook_prepare_release_task - task is being reaped, clean up tracing
+ * @task:		task in %EXIT_DEAD state
+ *
+ * This is called in release_task() just before @task gets finally reaped
+ * and freed.  This would be the ideal place to remove and clean up any
+ * tracing-related state for @task.
+ *
+ * Called with no locks held.
+ */
+static inline void tracehook_prepare_release_task(struct task_struct *task)
+{
+}
+
+/**
+ * tracehook_finish_release_task - final tracing clean-up
+ * @task:		task in %EXIT_DEAD state
+ *
+ * This is called in release_task() when @task is being in the middle of
+ * being reaped.  After this, there must be no tracing entanglements.
+ *
+ * Called with write_lock_irq(&tasklist_lock) held.
+ */
+static inline void tracehook_finish_release_task(struct task_struct *task)
+{
+	ptrace_release_task(task);
+}
+
+/**
+ * tracehook_signal_handler - signal handler setup is complete
+ * @sig:		number of signal being delivered
+ * @info:		siginfo_t of signal being delivered
+ * @ka:			sigaction setting that chose the handler
+ * @regs:		user register state
+ * @stepping:		nonzero if debugger single-step or block-step in use
+ *
+ * Called by the arch code after a signal handler has been set up.
+ * Register and stack state reflects the user handler about to run.
+ * Signal mask changes have already been made.
+ *
+ * Called without locks, shortly before returning to user mode
+ * (or handling more signals).
+ */
+static inline void tracehook_signal_handler(int sig, siginfo_t *info,
+					    const struct k_sigaction *ka,
+					    struct pt_regs *regs, int stepping)
+{
+	if (stepping)
+		ptrace_notify(SIGTRAP);
+}
+
+/**
+ * tracehook_consider_ignored_signal - suppress short-circuit of ignored signal
+ * @task:		task receiving the signal
+ * @sig:		signal number being sent
+ * @handler:		%SIG_IGN or %SIG_DFL
+ *
+ * Return zero iff tracing doesn't care to examine this ignored signal,
+ * so it can short-circuit normal delivery and never even get queued.
+ * Either @handler is %SIG_DFL and @sig's default is ignore, or it's %SIG_IGN.
+ *
+ * Called with @task->sighand->siglock held.
+ */
+static inline int tracehook_consider_ignored_signal(struct task_struct *task,
+						    int sig,
+						    void __user *handler)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
+/**
+ * tracehook_consider_fatal_signal - suppress special handling of fatal signal
+ * @task:		task receiving the signal
+ * @sig:		signal number being sent
+ * @handler:		%SIG_DFL or %SIG_IGN
+ *
+ * Return nonzero to prevent special handling of this termination signal.
+ * Normally @handler is %SIG_DFL.  It can be %SIG_IGN if @sig is ignored,
+ * in which case force_sig() is about to reset it to %SIG_DFL.
+ * When this returns zero, this signal might cause a quick termination
+ * that does not give the debugger a chance to intercept the signal.
+ *
+ * Called with or without @task->sighand->siglock held.
+ */
+static inline int tracehook_consider_fatal_signal(struct task_struct *task,
+						  int sig,
+						  void __user *handler)
+{
+	return (task_ptrace(task) & PT_PTRACED) != 0;
+}
+
+/**
+ * tracehook_force_sigpending - let tracing force signal_pending(current) on
+ *
+ * Called when recomputing our signal_pending() flag.  Return nonzero
+ * to force the signal_pending() flag on, so that tracehook_get_signal()
+ * will be called before the next return to user mode.
+ *
+ * Called with @current->sighand->siglock held.
+ */
+static inline int tracehook_force_sigpending(void)
+{
+	return 0;
+}
+
+/**
+ * tracehook_get_signal - deliver synthetic signal to traced task
+ * @task:		@current
+ * @regs:		task_pt_regs(@current)
+ * @info:		details of synthetic signal
+ * @return_ka:		sigaction for synthetic signal
+ *
+ * Return zero to check for a real pending signal normally.
+ * Return -1 after releasing the siglock to repeat the check.
+ * Return a signal number to induce an artifical signal delivery,
+ * setting *@info and *@return_ka to specify its details and behavior.
+ *
+ * The @return_ka->sa_handler value controls the disposition of the
+ * signal, no matter the signal number.  For %SIG_DFL, the return value
+ * is a representative signal to indicate the behavior (e.g. %SIGTERM
+ * for death, %SIGQUIT for core dump, %SIGSTOP for job control stop,
+ * %SIGTSTP for stop unless in an orphaned pgrp), but the signal number
+ * reported will be @info->si_signo instead.
+ *
+ * Called with @task->sighand->siglock held, before dequeuing pending signals.
+ */
+static inline int tracehook_get_signal(struct task_struct *task,
+				       struct pt_regs *regs,
+				       siginfo_t *info,
+				       struct k_sigaction *return_ka)
+{
+	return 0;
+}
+
+/**
+ * tracehook_notify_jctl - report about job control stop/continue
+ * @notify:		nonzero if this is the last thread in the group to stop
+ * @why:		%CLD_STOPPED or %CLD_CONTINUED
+ *
+ * This is called when we might call do_notify_parent_cldstop().
+ * It's called when about to stop for job control; we are already in
+ * %TASK_STOPPED state, about to call schedule().  It's also called when
+ * a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made.
+ *
+ * Return nonzero to generate a %SIGCHLD with @why, which is
+ * normal if @notify is nonzero.
+ *
+ * Called with no locks held.
+ */
+static inline int tracehook_notify_jctl(int notify, int why)
+{
+	return notify || (current->ptrace & PT_PTRACED);
+}
+
+#define DEATH_REAP			-1
+#define DEATH_DELAYED_GROUP_LEADER	-2
+
+/**
+ * tracehook_notify_death - task is dead, ready to notify parent
+ * @task:		@current task now exiting
+ * @death_cookie:	value to pass to tracehook_report_death()
+ * @group_dead:		nonzero if this was the last thread in the group to die
+ *
+ * A return value >= 0 means call do_notify_parent() with that signal
+ * number.  Negative return value can be %DEATH_REAP to self-reap right
+ * now, or %DEATH_DELAYED_GROUP_LEADER to a zombie without notifying our
+ * parent.  Note that a return value of 0 means a do_notify_parent() call
+ * that sends no signal, but still wakes up a parent blocked in wait*().
+ *
+ * Called with write_lock_irq(&tasklist_lock) held.
+ */
+static inline int tracehook_notify_death(struct task_struct *task,
+					 void **death_cookie, int group_dead)
+{
+	if (task->exit_signal == -1)
+		return task->ptrace ? SIGCHLD : DEATH_REAP;
+
+	/*
+	 * If something other than our normal parent is ptracing us, then
+	 * send it a SIGCHLD instead of honoring exit_signal.  exit_signal
+	 * only has special meaning to our real parent.
+	 */
+	if (thread_group_empty(task) && !ptrace_reparented(task))
+		return task->exit_signal;
+
+	return task->ptrace ? SIGCHLD : DEATH_DELAYED_GROUP_LEADER;
+}
+
+/**
+ * tracehook_report_death - task is dead and ready to be reaped
+ * @task:		@current task now exiting
+ * @signal:		return value from tracheook_notify_death()
+ * @death_cookie:	value passed back from tracehook_notify_death()
+ * @group_dead:		nonzero if this was the last thread in the group to die
+ *
+ * Thread has just become a zombie or is about to self-reap.  If positive,
+ * @signal is the signal number just sent to the parent (usually %SIGCHLD).
+ * If @signal is %DEATH_REAP, this thread will self-reap.  If @signal is
+ * %DEATH_DELAYED_GROUP_LEADER, this is a delayed_group_leader() zombie.
+ * The @death_cookie was passed back by tracehook_notify_death().
+ *
+ * If normal reaping is not inhibited, @task->exit_state might be changing
+ * in parallel.
+ *
+ * Called without locks.
+ */
+static inline void tracehook_report_death(struct task_struct *task,
+					  int signal, void *death_cookie,
+					  int group_dead)
+{
+}
+
+#ifdef TIF_NOTIFY_RESUME
+/**
+ * set_notify_resume - cause tracehook_notify_resume() to be called
+ * @task:		task that will call tracehook_notify_resume()
+ *
+ * Calling this arranges that @task will call tracehook_notify_resume()
+ * before returning to user mode.  If it's already running in user mode,
+ * it will enter the kernel and call tracehook_notify_resume() soon.
+ * If it's blocked, it will not be woken.
+ */
+static inline void set_notify_resume(struct task_struct *task)
+{
+	if (!test_and_set_tsk_thread_flag(task, TIF_NOTIFY_RESUME))
+		kick_process(task);
+}
+
+/**
+ * tracehook_notify_resume - report when about to return to user mode
+ * @regs:		user-mode registers of @current task
+ *
+ * This is called when %TIF_NOTIFY_RESUME has been set.  Now we are
+ * about to return to user mode, and the user state in @regs can be
+ * inspected or adjusted.  The caller in arch code has cleared
+ * %TIF_NOTIFY_RESUME before the call.  If the flag gets set again
+ * asynchronously, this will be called again before we return to
+ * user mode.
+ *
+ * Called without locks.
+ */
+static inline void tracehook_notify_resume(struct pt_regs *regs)
+{
+}
+#endif	/* TIF_NOTIFY_RESUME */
+
+#endif	/* <linux/tracehook.h> */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 324a3b231d40..e3579cb086e0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -71,7 +71,8 @@ struct tty_bufhead {
 	struct tty_buffer *head;	/* Queue head */
 	struct tty_buffer *tail;	/* Active buffer */
 	struct tty_buffer *free;	/* Free queue head */
-	int memory_used;		/* Buffer space used excluding free queue */
+	int memory_used;		/* Buffer space used excluding
+								free queue */
 };
 /*
  * When a break, frame error, or parity error happens, these codes are
@@ -101,71 +102,96 @@ struct tty_bufhead {
 #define LNEXT_CHAR(tty)	((tty)->termios->c_cc[VLNEXT])
 #define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
 
-#define _I_FLAG(tty,f)	((tty)->termios->c_iflag & (f))
-#define _O_FLAG(tty,f)	((tty)->termios->c_oflag & (f))
-#define _C_FLAG(tty,f)	((tty)->termios->c_cflag & (f))
-#define _L_FLAG(tty,f)	((tty)->termios->c_lflag & (f))
-
-#define I_IGNBRK(tty)	_I_FLAG((tty),IGNBRK)
-#define I_BRKINT(tty)	_I_FLAG((tty),BRKINT)
-#define I_IGNPAR(tty)	_I_FLAG((tty),IGNPAR)
-#define I_PARMRK(tty)	_I_FLAG((tty),PARMRK)
-#define I_INPCK(tty)	_I_FLAG((tty),INPCK)
-#define I_ISTRIP(tty)	_I_FLAG((tty),ISTRIP)
-#define I_INLCR(tty)	_I_FLAG((tty),INLCR)
-#define I_IGNCR(tty)	_I_FLAG((tty),IGNCR)
-#define I_ICRNL(tty)	_I_FLAG((tty),ICRNL)
-#define I_IUCLC(tty)	_I_FLAG((tty),IUCLC)
-#define I_IXON(tty)	_I_FLAG((tty),IXON)
-#define I_IXANY(tty)	_I_FLAG((tty),IXANY)
-#define I_IXOFF(tty)	_I_FLAG((tty),IXOFF)
-#define I_IMAXBEL(tty)	_I_FLAG((tty),IMAXBEL)
-#define I_IUTF8(tty)	_I_FLAG((tty),IUTF8)
-
-#define O_OPOST(tty)	_O_FLAG((tty),OPOST)
-#define O_OLCUC(tty)	_O_FLAG((tty),OLCUC)
-#define O_ONLCR(tty)	_O_FLAG((tty),ONLCR)
-#define O_OCRNL(tty)	_O_FLAG((tty),OCRNL)
-#define O_ONOCR(tty)	_O_FLAG((tty),ONOCR)
-#define O_ONLRET(tty)	_O_FLAG((tty),ONLRET)
-#define O_OFILL(tty)	_O_FLAG((tty),OFILL)
-#define O_OFDEL(tty)	_O_FLAG((tty),OFDEL)
-#define O_NLDLY(tty)	_O_FLAG((tty),NLDLY)
-#define O_CRDLY(tty)	_O_FLAG((tty),CRDLY)
-#define O_TABDLY(tty)	_O_FLAG((tty),TABDLY)
-#define O_BSDLY(tty)	_O_FLAG((tty),BSDLY)
-#define O_VTDLY(tty)	_O_FLAG((tty),VTDLY)
-#define O_FFDLY(tty)	_O_FLAG((tty),FFDLY)
-
-#define C_BAUD(tty)	_C_FLAG((tty),CBAUD)
-#define C_CSIZE(tty)	_C_FLAG((tty),CSIZE)
-#define C_CSTOPB(tty)	_C_FLAG((tty),CSTOPB)
-#define C_CREAD(tty)	_C_FLAG((tty),CREAD)
-#define C_PARENB(tty)	_C_FLAG((tty),PARENB)
-#define C_PARODD(tty)	_C_FLAG((tty),PARODD)
-#define C_HUPCL(tty)	_C_FLAG((tty),HUPCL)
-#define C_CLOCAL(tty)	_C_FLAG((tty),CLOCAL)
-#define C_CIBAUD(tty)	_C_FLAG((tty),CIBAUD)
-#define C_CRTSCTS(tty)	_C_FLAG((tty),CRTSCTS)
-
-#define L_ISIG(tty)	_L_FLAG((tty),ISIG)
-#define L_ICANON(tty)	_L_FLAG((tty),ICANON)
-#define L_XCASE(tty)	_L_FLAG((tty),XCASE)
-#define L_ECHO(tty)	_L_FLAG((tty),ECHO)
-#define L_ECHOE(tty)	_L_FLAG((tty),ECHOE)
-#define L_ECHOK(tty)	_L_FLAG((tty),ECHOK)
-#define L_ECHONL(tty)	_L_FLAG((tty),ECHONL)
-#define L_NOFLSH(tty)	_L_FLAG((tty),NOFLSH)
-#define L_TOSTOP(tty)	_L_FLAG((tty),TOSTOP)
-#define L_ECHOCTL(tty)	_L_FLAG((tty),ECHOCTL)
-#define L_ECHOPRT(tty)	_L_FLAG((tty),ECHOPRT)
-#define L_ECHOKE(tty)	_L_FLAG((tty),ECHOKE)
-#define L_FLUSHO(tty)	_L_FLAG((tty),FLUSHO)
-#define L_PENDIN(tty)	_L_FLAG((tty),PENDIN)
-#define L_IEXTEN(tty)	_L_FLAG((tty),IEXTEN)
+#define _I_FLAG(tty, f)	((tty)->termios->c_iflag & (f))
+#define _O_FLAG(tty, f)	((tty)->termios->c_oflag & (f))
+#define _C_FLAG(tty, f)	((tty)->termios->c_cflag & (f))
+#define _L_FLAG(tty, f)	((tty)->termios->c_lflag & (f))
+
+#define I_IGNBRK(tty)	_I_FLAG((tty), IGNBRK)
+#define I_BRKINT(tty)	_I_FLAG((tty), BRKINT)
+#define I_IGNPAR(tty)	_I_FLAG((tty), IGNPAR)
+#define I_PARMRK(tty)	_I_FLAG((tty), PARMRK)
+#define I_INPCK(tty)	_I_FLAG((tty), INPCK)
+#define I_ISTRIP(tty)	_I_FLAG((tty), ISTRIP)
+#define I_INLCR(tty)	_I_FLAG((tty), INLCR)
+#define I_IGNCR(tty)	_I_FLAG((tty), IGNCR)
+#define I_ICRNL(tty)	_I_FLAG((tty), ICRNL)
+#define I_IUCLC(tty)	_I_FLAG((tty), IUCLC)
+#define I_IXON(tty)	_I_FLAG((tty), IXON)
+#define I_IXANY(tty)	_I_FLAG((tty), IXANY)
+#define I_IXOFF(tty)	_I_FLAG((tty), IXOFF)
+#define I_IMAXBEL(tty)	_I_FLAG((tty), IMAXBEL)
+#define I_IUTF8(tty)	_I_FLAG((tty), IUTF8)
+
+#define O_OPOST(tty)	_O_FLAG((tty), OPOST)
+#define O_OLCUC(tty)	_O_FLAG((tty), OLCUC)
+#define O_ONLCR(tty)	_O_FLAG((tty), ONLCR)
+#define O_OCRNL(tty)	_O_FLAG((tty), OCRNL)
+#define O_ONOCR(tty)	_O_FLAG((tty), ONOCR)
+#define O_ONLRET(tty)	_O_FLAG((tty), ONLRET)
+#define O_OFILL(tty)	_O_FLAG((tty), OFILL)
+#define O_OFDEL(tty)	_O_FLAG((tty), OFDEL)
+#define O_NLDLY(tty)	_O_FLAG((tty), NLDLY)
+#define O_CRDLY(tty)	_O_FLAG((tty), CRDLY)
+#define O_TABDLY(tty)	_O_FLAG((tty), TABDLY)
+#define O_BSDLY(tty)	_O_FLAG((tty), BSDLY)
+#define O_VTDLY(tty)	_O_FLAG((tty), VTDLY)
+#define O_FFDLY(tty)	_O_FLAG((tty), FFDLY)
+
+#define C_BAUD(tty)	_C_FLAG((tty), CBAUD)
+#define C_CSIZE(tty)	_C_FLAG((tty), CSIZE)
+#define C_CSTOPB(tty)	_C_FLAG((tty), CSTOPB)
+#define C_CREAD(tty)	_C_FLAG((tty), CREAD)
+#define C_PARENB(tty)	_C_FLAG((tty), PARENB)
+#define C_PARODD(tty)	_C_FLAG((tty), PARODD)
+#define C_HUPCL(tty)	_C_FLAG((tty), HUPCL)
+#define C_CLOCAL(tty)	_C_FLAG((tty), CLOCAL)
+#define C_CIBAUD(tty)	_C_FLAG((tty), CIBAUD)
+#define C_CRTSCTS(tty)	_C_FLAG((tty), CRTSCTS)
+
+#define L_ISIG(tty)	_L_FLAG((tty), ISIG)
+#define L_ICANON(tty)	_L_FLAG((tty), ICANON)
+#define L_XCASE(tty)	_L_FLAG((tty), XCASE)
+#define L_ECHO(tty)	_L_FLAG((tty), ECHO)
+#define L_ECHOE(tty)	_L_FLAG((tty), ECHOE)
+#define L_ECHOK(tty)	_L_FLAG((tty), ECHOK)
+#define L_ECHONL(tty)	_L_FLAG((tty), ECHONL)
+#define L_NOFLSH(tty)	_L_FLAG((tty), NOFLSH)
+#define L_TOSTOP(tty)	_L_FLAG((tty), TOSTOP)
+#define L_ECHOCTL(tty)	_L_FLAG((tty), ECHOCTL)
+#define L_ECHOPRT(tty)	_L_FLAG((tty), ECHOPRT)
+#define L_ECHOKE(tty)	_L_FLAG((tty), ECHOKE)
+#define L_FLUSHO(tty)	_L_FLAG((tty), FLUSHO)
+#define L_PENDIN(tty)	_L_FLAG((tty), PENDIN)
+#define L_IEXTEN(tty)	_L_FLAG((tty), IEXTEN)
 
 struct device;
 struct signal_struct;
+
+/*
+ * Port level information. Each device keeps its own port level information
+ * so provide a common structure for those ports wanting to use common support
+ * routines.
+ *
+ * The tty port has a different lifetime to the tty so must be kept apart.
+ * In addition be careful as tty -> port mappings are valid for the life
+ * of the tty object but in many cases port -> tty mappings are valid only
+ * until a hangup so don't use the wrong path.
+ */
+
+struct tty_port {
+	struct tty_struct	*tty;		/* Back pointer */
+	int			blocked_open;	/* Waiting to open */
+	int			count;		/* Usage count */
+	wait_queue_head_t	open_wait;	/* Open waiters */
+	wait_queue_head_t	close_wait;	/* Close waiters */
+	unsigned long		flags;		/* TTY flags ASY_*/
+	struct mutex		mutex;		/* Locking */
+	unsigned char		*xmit_buf;	/* Optional buffer */
+	int			close_delay;	/* Close port delay */
+	int			closing_wait;	/* Delay for output */
+};
+
 /*
  * Where all of the state associated with a tty is kept while the tty
  * is open.  Since the termios state should be kept even if the tty
@@ -185,6 +211,7 @@ struct tty_struct {
 	struct tty_driver *driver;
 	const struct tty_operations *ops;
 	int index;
+	/* The ldisc objects are protected by tty_ldisc_lock at the moment */
 	struct tty_ldisc ldisc;
 	struct mutex termios_mutex;
 	spinlock_t ctrl_lock;
@@ -213,7 +240,7 @@ struct tty_struct {
 	struct list_head tty_files;
 
 #define N_TTY_BUF_SIZE 4096
-	
+
 	/*
 	 * The following is data for the N_TTY line discipline.  For
 	 * historical reasons, this is included in the tty structure.
@@ -241,6 +268,7 @@ struct tty_struct {
 	spinlock_t read_lock;
 	/* If the tty has a pending do_SAK, queue it here - akpm */
 	struct work_struct SAK_work;
+	struct tty_port *port;
 };
 
 /* tty magic number */
@@ -248,14 +276,14 @@ struct tty_struct {
 
 /*
  * These bits are used in the flags field of the tty structure.
- * 
+ *
  * So that interrupts won't be able to mess up the queues,
  * copy_to_cooked must be atomic with respect to itself, as must
  * tty->write.  Thus, you must use the inline functions set_bit() and
  * clear_bit() to make things atomic.
  */
 #define TTY_THROTTLED 		0	/* Call unthrottle() at threshold min */
-#define TTY_IO_ERROR 		1	/* Canse an I/O error (may be no ldisc too) */
+#define TTY_IO_ERROR 		1	/* Cause an I/O error (may be no ldisc too) */
 #define TTY_OTHER_CLOSED 	2	/* Other side (if any) has closed */
 #define TTY_EXCLUSIVE 		3	/* Exclusive open mode */
 #define TTY_DEBUG 		4	/* Debugging */
@@ -285,12 +313,10 @@ extern int vcs_init(void);
 extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
 			      const char *routine);
 extern char *tty_name(struct tty_struct *tty, char *buf);
-extern void tty_wait_until_sent(struct tty_struct * tty, long timeout);
-extern int tty_check_change(struct tty_struct * tty);
-extern void stop_tty(struct tty_struct * tty);
-extern void start_tty(struct tty_struct * tty);
-extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
-extern int tty_unregister_ldisc(int disc);
+extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
+extern int tty_check_change(struct tty_struct *tty);
+extern void stop_tty(struct tty_struct *tty);
+extern void start_tty(struct tty_struct *tty);
 extern int tty_register_driver(struct tty_driver *driver);
 extern int tty_unregister_driver(struct tty_driver *driver);
 extern struct device *tty_register_device(struct tty_driver *driver,
@@ -310,10 +336,10 @@ extern int is_current_pgrp_orphaned(void);
 extern struct pid *tty_get_pgrp(struct tty_struct *tty);
 extern int is_ignored(int sig);
 extern int tty_signal(int sig, struct tty_struct *tty);
-extern void tty_hangup(struct tty_struct * tty);
-extern void tty_vhangup(struct tty_struct * tty);
+extern void tty_hangup(struct tty_struct *tty);
+extern void tty_vhangup(struct tty_struct *tty);
 extern void tty_unhangup(struct file *filp);
-extern int tty_hung_up_p(struct file * filp);
+extern int tty_hung_up_p(struct file *filp);
 extern void do_SAK(struct tty_struct *tty);
 extern void __do_SAK(struct tty_struct *tty);
 extern void disassociate_ctty(int priv);
@@ -322,17 +348,17 @@ extern void tty_flip_buffer_push(struct tty_struct *tty);
 extern speed_t tty_get_baud_rate(struct tty_struct *tty);
 extern speed_t tty_termios_baud_rate(struct ktermios *termios);
 extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
-extern void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud);
-extern void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud);
+extern void tty_termios_encode_baud_rate(struct ktermios *termios,
+						speed_t ibaud, speed_t obaud);
+extern void tty_encode_baud_rate(struct tty_struct *tty,
+						speed_t ibaud, speed_t obaud);
 extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
 extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
 
 extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
 extern void tty_ldisc_deref(struct tty_ldisc *);
 extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
-
-extern struct tty_ldisc *tty_ldisc_get(int);
-extern void tty_ldisc_put(int);
+extern const struct file_operations tty_ldiscs_proc_fops;
 
 extern void tty_wakeup(struct tty_struct *tty);
 extern void tty_ldisc_flush(struct tty_struct *tty);
@@ -351,10 +377,23 @@ extern void tty_write_unlock(struct tty_struct *tty);
 extern int tty_write_lock(struct tty_struct *tty, int ndelay);
 #define tty_is_writelocked(tty)  (mutex_is_locked(&tty->atomic_write_lock))
 
+extern void tty_port_init(struct tty_port *port);
+extern int tty_port_alloc_xmit_buf(struct tty_port *port);
+extern void tty_port_free_xmit_buf(struct tty_port *port);
+
+extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
+extern int tty_unregister_ldisc(int disc);
+extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
+extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
+extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty);
+extern void tty_ldisc_init(struct tty_struct *tty);
+extern void tty_ldisc_begin(void);
+/* This last one is just for the tty layer internals and shouldn't be used elsewhere */
+extern void tty_ldisc_enable(struct tty_struct *tty);
 
 
 /* n_tty.c */
-extern struct tty_ldisc tty_ldisc_N_TTY;
+extern struct tty_ldisc_ops tty_ldisc_N_TTY;
 
 /* tty_audit.c */
 #ifdef CONFIG_AUDIT
@@ -363,7 +402,8 @@ extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 extern void tty_audit_exit(void);
 extern void tty_audit_fork(struct signal_struct *sig);
 extern void tty_audit_push(struct tty_struct *tty);
-extern void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid);
+extern void tty_audit_push_task(struct task_struct *tsk,
+					uid_t loginuid, u32 sessionid);
 #else
 static inline void tty_audit_add_data(struct tty_struct *tty,
 				      unsigned char *data, size_t size)
@@ -378,19 +418,20 @@ static inline void tty_audit_fork(struct signal_struct *sig)
 static inline void tty_audit_push(struct tty_struct *tty)
 {
 }
-static inline void tty_audit_push_task(struct task_struct *tsk, uid_t loginuid, u32 sessionid)
+static inline void tty_audit_push_task(struct task_struct *tsk,
+					uid_t loginuid, u32 sessionid)
 {
 }
 #endif
 
 /* tty_ioctl.c */
-extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
+extern int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 		       unsigned int cmd, unsigned long arg);
 
 /* serial.c */
 
 extern void serial_console_init(void);
- 
+
 /* pcxx.c */
 
 extern int pcxe_open(struct tty_struct *tty, struct file *filp);
@@ -401,7 +442,7 @@ extern void console_print(const char *);
 
 /* vt.c */
 
-extern int vt_ioctl(struct tty_struct *tty, struct file * file,
+extern int vt_ioctl(struct tty_struct *tty, struct file *file,
 		    unsigned int cmd, unsigned long arg);
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index d2a003586761..e1065ac0d922 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -135,7 +135,7 @@
  *
  *	Optional:
  *
- * void (*break_ctl)(struct tty_stuct *tty, int state);
+ * int (*break_ctl)(struct tty_stuct *tty, int state);
  *
  * 	This optional routine requests the tty driver to turn on or
  * 	off BREAK status on the RS-232 port.  If state is -1,
@@ -146,6 +146,10 @@
  * 	handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
  * 	TIOCCBRK.
  *
+ *	If the driver sets TTY_DRIVER_HARDWARE_BREAK then the interface
+ *	will also be called with actual times and the hardware is expected
+ *	to do the delay work itself. 0 and -1 are still used for on/off.
+ *
  *	Optional: Required for TCSBRK/BRKP/etc handling.
  *
  * void (*wait_until_sent)(struct tty_struct *tty, int timeout);
@@ -192,7 +196,7 @@ struct tty_operations {
 	void (*stop)(struct tty_struct *tty);
 	void (*start)(struct tty_struct *tty);
 	void (*hangup)(struct tty_struct *tty);
-	void (*break_ctl)(struct tty_struct *tty, int state);
+	int (*break_ctl)(struct tty_struct *tty, int state);
 	void (*flush_buffer)(struct tty_struct *tty);
 	void (*set_ldisc)(struct tty_struct *tty);
 	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
@@ -285,12 +289,18 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
  * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
  *	use dynamic memory keyed through the devpts filesystem.  This
  *	is only applicable to the pty driver.
+ *
+ * TTY_DRIVER_HARDWARE_BREAK -- hardware handles break signals. Pass
+ *	the requested timeout to the caller instead of using a simple
+ *	on/off interface.
+ *
  */
 #define TTY_DRIVER_INSTALLED		0x0001
 #define TTY_DRIVER_RESET_TERMIOS	0x0002
 #define TTY_DRIVER_REAL_RAW		0x0004
 #define TTY_DRIVER_DYNAMIC_DEV		0x0008
 #define TTY_DRIVER_DEVPTS_MEM		0x0010
+#define TTY_DRIVER_HARDWARE_BREAK	0x0020
 
 /* tty driver types */
 #define TTY_DRIVER_TYPE_SYSTEM		0x0001
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 6226504d9108..40f38d896777 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -104,7 +104,7 @@
 #include <linux/fs.h>
 #include <linux/wait.h>
 
-struct tty_ldisc {
+struct tty_ldisc_ops {
 	int	magic;
 	char	*name;
 	int	num;
@@ -142,6 +142,11 @@ struct tty_ldisc {
 	int refcount;
 };
 
+struct tty_ldisc {
+	struct tty_ldisc_ops *ops;
+	int refcount;
+};
+
 #define TTY_LDISC_MAGIC	0x5403
 
 #define LDISC_FLAG_DEFINED	0x00000001
diff --git a/include/linux/typecheck.h b/include/linux/typecheck.h
new file mode 100644
index 000000000000..eb5b74a575be
--- /dev/null
+++ b/include/linux/typecheck.h
@@ -0,0 +1,24 @@
+#ifndef TYPECHECK_H_INCLUDED
+#define TYPECHECK_H_INCLUDED
+
+/*
+ * Check at compile time that something is of a particular type.
+ * Always evaluates to 1 so you may use it easily in comparisons.
+ */
+#define typecheck(type,x) \
+({	type __dummy; \
+	typeof(x) __dummy2; \
+	(void)(&__dummy == &__dummy2); \
+	1; \
+})
+
+/*
+ * Check at compile time that 'function' is a certain type, or is a pointer
+ * to that type (needs to use typedef for the function type.)
+ */
+#define typecheck_fn(type,function) \
+({	typeof(type) __tmp = function; \
+	(void)__tmp; \
+})
+
+#endif		/* TYPECHECK_H_INCLUDED */
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 581ca2c14c52..0cf5c4c0ec81 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -38,6 +38,7 @@ struct udphdr {
 #ifdef __KERNEL__
 #include <net/inet_sock.h>
 #include <linux/skbuff.h>
+#include <net/netns/hash.h>
 
 static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
 {
@@ -46,6 +47,11 @@ static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
 
 #define UDP_HTABLE_SIZE		128
 
+static inline int udp_hashfn(struct net *net, const unsigned num)
+{
+	return (num + net_hash_mix(net)) & (UDP_HTABLE_SIZE - 1);
+}
+
 struct udp_sock {
 	/* inet_sock has to be the first member */
 	struct inet_sock inet;
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index 973386d439da..cdf338d94b7f 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -36,7 +36,7 @@ struct uio_mem {
 	struct uio_map		*map;
 };
 
-#define MAX_UIO_MAPS 	5
+#define MAX_UIO_MAPS	5
 
 struct uio_device;
 
@@ -53,6 +53,7 @@ struct uio_device;
  * @mmap:		mmap operation for this uio device
  * @open:		open operation for this uio device
  * @release:		release operation for this uio device
+ * @irqcontrol:		disable/enable irqs when 0/1 is written to /dev/uioX
  */
 struct uio_info {
 	struct uio_device	*uio_dev;
@@ -66,6 +67,7 @@ struct uio_info {
 	int (*mmap)(struct uio_info *info, struct vm_area_struct *vma);
 	int (*open)(struct uio_info *info, struct inode *inode);
 	int (*release)(struct uio_info *info, struct inode *inode);
+	int (*irqcontrol)(struct uio_info *info, s32 irq_on);
 };
 
 extern int __must_check
@@ -80,11 +82,11 @@ static inline int __must_check
 extern void uio_unregister_device(struct uio_info *info);
 extern void uio_event_notify(struct uio_info *info);
 
-/* defines for uio_device->irq */
+/* defines for uio_info->irq */
 #define UIO_IRQ_CUSTOM	-1
 #define UIO_IRQ_NONE	-2
 
-/* defines for uio_device->memtype */
+/* defines for uio_mem->memtype */
 #define UIO_MEM_NONE	0
 #define UIO_MEM_PHYS	1
 #define UIO_MEM_LOGICAL	2
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c08689ea9b4b..5811c5da69f9 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -160,6 +160,7 @@ struct usb_interface {
 	unsigned is_active:1;		/* the interface is not suspended */
 	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
 	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
+	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
 
 	struct device dev;		/* interface specific device info */
 	struct device *usb_dev;
@@ -293,7 +294,7 @@ struct usb_devmap {
 struct usb_bus {
 	struct device *controller;	/* host/master side hardware */
 	int busnum;			/* Bus number (in order of reg) */
-	char *bus_name;			/* stable id (PCI slot_name etc) */
+	const char *bus_name;		/* stable id (PCI slot_name etc) */
 	u8 uses_dma;			/* Does the host controller use DMA? */
 	u8 otg_port;			/* 0, or number of OTG/HNP port */
 	unsigned is_b_host:1;		/* true during some HNP roleswitches */
@@ -497,8 +498,6 @@ extern int usb_lock_device_for_reset(struct usb_device *udev,
 
 /* USB port reset for device reinitialization */
 extern int usb_reset_device(struct usb_device *dev);
-extern int usb_reset_composite_device(struct usb_device *dev,
-		struct usb_interface *iface);
 
 extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
 
@@ -958,9 +957,9 @@ struct usbdrv_wrap {
  * @resume: Called when the device is being resumed by the system.
  * @reset_resume: Called when the suspended device has been reset instead
  *	of being resumed.
- * @pre_reset: Called by usb_reset_composite_device() when the device
+ * @pre_reset: Called by usb_reset_device() when the device
  *	is about to be reset.
- * @post_reset: Called by usb_reset_composite_device() after the device
+ * @post_reset: Called by usb_reset_device() after the device
  *	has been reset
  * @id_table: USB drivers use ID table to support hotplugging.
  *	Export this with MODULE_DEVICE_TABLE(usb,...).  This must be set
@@ -972,6 +971,8 @@ struct usbdrv_wrap {
  *	added to this driver by preventing the sysfs file from being created.
  * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
  *	for interfaces bound to this driver.
+ * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
+ *	endpoints before calling the driver's disconnect method.
  *
  * USB interface drivers must provide a name, probe() and disconnect()
  * methods, and an id_table.  Other driver fields are optional.
@@ -1012,6 +1013,7 @@ struct usb_driver {
 	struct usbdrv_wrap drvwrap;
 	unsigned int no_dynamic_id:1;
 	unsigned int supports_autosuspend:1;
+	unsigned int soft_unbind:1;
 };
 #define	to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
new file mode 100644
index 000000000000..c932390c6da0
--- /dev/null
+++ b/include/linux/usb/composite.h
@@ -0,0 +1,338 @@
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef	__LINUX_USB_COMPOSITE_H
+#define	__LINUX_USB_COMPOSITE_H
+
+/*
+ * This framework is an optional layer on top of the USB Gadget interface,
+ * making it easier to build (a) Composite devices, supporting multiple
+ * functions within any single configuration, and (b) Multi-configuration
+ * devices, also supporting multiple functions but without necessarily
+ * having more than one function per configuration.
+ *
+ * Example:  a device with a single configuration supporting both network
+ * link and mass storage functions is a composite device.  Those functions
+ * might alternatively be packaged in individual configurations, but in
+ * the composite model the host can use both functions at the same time.
+ */
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+
+struct usb_configuration;
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and by language IDs provided in control requests
+ * @descriptors: Table of full (or low) speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at high speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ *	configuration with which this function is associated.
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ *	available resources including string and interface identifiers used
+ *	in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this function.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ *	initialize usb_ep.driver data at this time (when it is used).
+ *	Note that setting an interface to its current altsetting resets
+ *	interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting.  If this is not provided,
+ *	then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled.  Reasons
+ *	include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds.  Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver.  Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation.  Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once.  If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations.  An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+struct usb_function {
+	const char			*name;
+	struct usb_gadget_strings	**strings;
+	struct usb_descriptor_header	**descriptors;
+	struct usb_descriptor_header	**hs_descriptors;
+
+	struct usb_configuration	*config;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching.
+	 * Related:  unbind() may kfree() but bind() won't...
+	 */
+
+	/* configuration management:  bind/unbind */
+	int			(*bind)(struct usb_configuration *,
+					struct usb_function *);
+	void			(*unbind)(struct usb_configuration *,
+					struct usb_function *);
+
+	/* runtime state management */
+	int			(*set_alt)(struct usb_function *,
+					unsigned interface, unsigned alt);
+	int			(*get_alt)(struct usb_function *,
+					unsigned interface);
+	void			(*disable)(struct usb_function *);
+	int			(*setup)(struct usb_function *,
+					const struct usb_ctrlrequest *);
+	void			(*suspend)(struct usb_function *);
+	void			(*resume)(struct usb_function *);
+
+	/* internals */
+	struct list_head		list;
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+/**
+ * ep_choose - select descriptor endpoint at current device speed
+ * @g: gadget, connected and running at some speed
+ * @hs: descriptor to use for high speed operation
+ * @fs: descriptor to use for full or low speed operation
+ */
+static inline struct usb_endpoint_descriptor *
+ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
+		struct usb_endpoint_descriptor *fs)
+{
+	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return hs;
+	return fs;
+}
+
+#define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
+
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ *	and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ *	Examples include OTG and vendor-specific descriptors.
+ * @bind: Called from @usb_add_config() to allocate resources unique to this
+ *	configuration and to call @usb_add_function() for each function used.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ *	device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @bMaxPower: Copied into configuration descriptor.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ *	the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers.  Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality.  Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device.  The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independant of each other, but that's
+ * not mandatory.  CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+	const char			*label;
+	struct usb_gadget_strings	**strings;
+	const struct usb_descriptor_header **descriptors;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching...
+	 */
+
+	/* configuration management:  bind/unbind */
+	int			(*bind)(struct usb_configuration *);
+	void			(*unbind)(struct usb_configuration *);
+	int			(*setup)(struct usb_configuration *,
+					const struct usb_ctrlrequest *);
+
+	/* fields in the config descriptor */
+	u8			bConfigurationValue;
+	u8			iConfiguration;
+	u8			bmAttributes;
+	u8			bMaxPower;
+
+	struct usb_composite_dev	*cdev;
+
+	/* internals */
+	struct list_head	list;
+	struct list_head	functions;
+	u8			next_interface_id;
+	unsigned		highspeed:1;
+	unsigned		fullspeed:1;
+	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+		struct usb_configuration *);
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @dev: Template descriptor for the device, including default device
+ *	identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and language IDs provided in control requests
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ *	whole device, such as string IDs, and add its configurations using
+ *	@usb_add_config().  This may fail by returning a negative errno
+ *	value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind(); called as a side effect of unregistering
+ *	this driver.
+ *
+ * Devices default to reporting self powered operation.  Devices which rely
+ * on bus powered operation should report this in their @bind() method.
+ *
+ * Before returning from @bind, various fields in the template descriptor
+ * may be overridden.  These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers.  (The strings will not be defined unless
+ * they are defined in @dev and @strings.)  The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+struct usb_composite_driver {
+	const char				*name;
+	const struct usb_device_descriptor	*dev;
+	struct usb_gadget_strings		**strings;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching...
+	 */
+
+	int			(*bind)(struct usb_composite_dev *);
+	int			(*unbind)(struct usb_composite_dev *);
+};
+
+extern int usb_composite_register(struct usb_composite_driver *);
+extern void usb_composite_unregister(struct usb_composite_driver *);
+
+
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @bufsiz: size of buffer pre-allocated in @req
+ * @config: the currently active configuration
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE:  it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ *     needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ *     "is it wired", plus (presumably in a wrapper structure)
+ *     bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ *     wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ *     support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ *     necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ *     configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+struct usb_composite_dev {
+	struct usb_gadget		*gadget;
+	struct usb_request		*req;
+	unsigned			bufsiz;
+
+	struct usb_configuration	*config;
+
+	/* internals */
+	struct usb_device_descriptor	desc;
+	struct list_head		configs;
+	struct usb_composite_driver	*driver;
+	u8				next_string_id;
+
+	spinlock_t			lock;
+
+	/* REVISIT use and existence of lock ... */
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+
+/* messaging utils */
+#define DBG(d, fmt, args...) \
+	dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+	dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) \
+	dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+	dev_info(&(d)->gadget->dev , fmt , ## args)
+
+#endif	/* __LINUX_USB_COMPOSITE_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index cf468fbdbf8e..0460a746480c 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -33,7 +33,8 @@ struct usb_ep;
  * @short_not_ok: When reading data, makes short packets be
  *     treated as errors (queue stops advancing till cleanup).
  * @complete: Function called when request completes, so this request and
- *	its buffer may be re-used.
+ *	its buffer may be re-used.  The function will always be called with
+ *	interrupts disabled, and it must not sleep.
  *	Reads terminate with a short packet, or when the buffer fills,
  *	whichever comes first.  When writes terminate, some data bytes
  *	will usually still be in flight (often in a hardware fifo).
@@ -271,7 +272,10 @@ static inline void usb_ep_free_request(struct usb_ep *ep,
  * (Note that some USB device controllers disallow protocol stall responses
  * in some cases.)  When control responses are deferred (the response is
  * written after the setup callback returns), then usb_ep_set_halt() may be
- * used on ep0 to trigger protocol stalls.
+ * used on ep0 to trigger protocol stalls.  Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
  *
  * For periodic endpoints, like interrupt or isochronous ones, the usb host
  * arranges to poll once per interval, and the gadget driver usually will
@@ -858,6 +862,25 @@ int usb_descriptor_fillbuf(void *, unsigned,
 int usb_gadget_config_buf(const struct usb_config_descriptor *config,
 	void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
 
+/* copy a NULL-terminated vector of descriptors */
+struct usb_descriptor_header **usb_copy_descriptors(
+		struct usb_descriptor_header **);
+
+/* return copy of endpoint descriptor given original descriptor set */
+struct usb_endpoint_descriptor *usb_find_endpoint(
+	struct usb_descriptor_header **src,
+	struct usb_descriptor_header **copy,
+	struct usb_endpoint_descriptor *match);
+
+/**
+ * usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
+ * @v: vector of descriptors
+ */
+static inline void usb_free_descriptors(struct usb_descriptor_header **v)
+{
+	kfree(v);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* utility wrapping a simple endpoint selection policy */
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
new file mode 100644
index 000000000000..e345ceaf72d6
--- /dev/null
+++ b/include/linux/usb/irda.h
@@ -0,0 +1,151 @@
+/*
+ * USB IrDA Bridge Device Definition
+ */
+
+#ifndef __LINUX_USB_IRDA_H
+#define __LINUX_USB_IRDA_H
+
+/* This device should use Application-specific class */
+
+#define USB_SUBCLASS_IRDA			0x02
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific requests (bRequest field) */
+
+#define USB_REQ_CS_IRDA_RECEIVING		1
+#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY	3
+#define USB_REQ_CS_IRDA_RATE_SNIFF		4
+#define USB_REQ_CS_IRDA_UNICAST_LIST		5
+#define USB_REQ_CS_IRDA_GET_CLASS_DESC		6
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific descriptor */
+
+#define USB_DT_CS_IRDA				0x21
+
+/*-------------------------------------------------------------------------*/
+
+/* Data sizes */
+
+#define USB_IRDA_DS_2048			(1 << 5)
+#define USB_IRDA_DS_1024			(1 << 4)
+#define USB_IRDA_DS_512				(1 << 3)
+#define USB_IRDA_DS_256				(1 << 2)
+#define USB_IRDA_DS_128				(1 << 1)
+#define USB_IRDA_DS_64				(1 << 0)
+
+/* Window sizes */
+
+#define USB_IRDA_WS_7				(1 << 6)
+#define USB_IRDA_WS_6				(1 << 5)
+#define USB_IRDA_WS_5				(1 << 4)
+#define USB_IRDA_WS_4				(1 << 3)
+#define USB_IRDA_WS_3				(1 << 2)
+#define USB_IRDA_WS_2				(1 << 1)
+#define USB_IRDA_WS_1				(1 << 0)
+
+/* Min turnaround times in usecs */
+
+#define USB_IRDA_MTT_0				(1 << 7)
+#define USB_IRDA_MTT_10				(1 << 6)
+#define USB_IRDA_MTT_50				(1 << 5)
+#define USB_IRDA_MTT_100			(1 << 4)
+#define USB_IRDA_MTT_500			(1 << 3)
+#define USB_IRDA_MTT_1000			(1 << 2)
+#define USB_IRDA_MTT_5000			(1 << 1)
+#define USB_IRDA_MTT_10000			(1 << 0)
+
+/* Baud rates */
+
+#define USB_IRDA_BR_4000000			(1 << 8)
+#define USB_IRDA_BR_1152000			(1 << 7)
+#define USB_IRDA_BR_576000			(1 << 6)
+#define USB_IRDA_BR_115200			(1 << 5)
+#define USB_IRDA_BR_57600			(1 << 4)
+#define USB_IRDA_BR_38400			(1 << 3)
+#define USB_IRDA_BR_19200			(1 << 2)
+#define USB_IRDA_BR_9600			(1 << 1)
+#define USB_IRDA_BR_2400			(1 << 0)
+
+/* Additional BOFs */
+
+#define USB_IRDA_AB_0				(1 << 7)
+#define USB_IRDA_AB_1				(1 << 6)
+#define USB_IRDA_AB_2				(1 << 5)
+#define USB_IRDA_AB_3				(1 << 4)
+#define USB_IRDA_AB_6				(1 << 3)
+#define USB_IRDA_AB_12				(1 << 2)
+#define USB_IRDA_AB_24				(1 << 1)
+#define USB_IRDA_AB_48				(1 << 0)
+
+/* IRDA Rate Sniff */
+
+#define USB_IRDA_RATE_SNIFF			1
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_irda_cs_descriptor {
+	__u8	bLength;
+	__u8	bDescriptorType;
+
+	__le16	bcdSpecRevision;
+	__u8	bmDataSize;
+	__u8	bmWindowSize;
+	__u8	bmMinTurnaroundTime;
+	__le16	wBaudRate;
+	__u8	bmAdditionalBOFs;
+	__u8	bIrdaRateSniff;
+	__u8	bMaxUnicastList;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* Data Format */
+
+#define USB_IRDA_STATUS_MEDIA_BUSY	(1 << 7)
+
+/* The following is a 4-bit value used for both
+ * inbound and outbound headers:
+ *
+ * 0 - speed ignored
+ * 1 - 2400 bps
+ * 2 - 9600 bps
+ * 3 - 19200 bps
+ * 4 - 38400 bps
+ * 5 - 57600 bps
+ * 6 - 115200 bps
+ * 7 - 576000 bps
+ * 8 - 1.152 Mbps
+ * 9 - 5 mbps
+ * 10..15 - Reserved
+ */
+#define USB_IRDA_STATUS_LINK_SPEED	0x0f
+
+/* The following is a 4-bit value used only for
+ * outbound header:
+ *
+ * 0 - No change (BOF ignored)
+ * 1 - 48 BOFs
+ * 2 - 24 BOFs
+ * 3 - 12 BOFs
+ * 4 - 6 BOFs
+ * 5 - 3 BOFs
+ * 6 - 2 BOFs
+ * 7 - 1 BOFs
+ * 8 - 0 BOFs
+ * 9..15 - Reserved
+ */
+#define USB_IRDA_EXTRA_BOFS		0xf0
+
+struct usb_irda_inbound_header {
+	__u8		bmStatus;
+};
+
+struct usb_irda_outbound_header {
+	__u8		bmChange;
+};
+
+#endif /* __LINUX_USB_IRDA_H */
+
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 29d6458ecb8d..0a6e6d4b929a 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -260,7 +260,8 @@ struct rndis_keepalive_c {	/* IN (optionally OUT) */
 
 
 extern void rndis_status(struct usbnet *dev, struct urb *urb);
-extern int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf);
+extern int
+rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen);
 extern int
 generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags);
 extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8f891cbaf9ab..09a3e6a7518f 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -62,7 +62,7 @@
  */
 struct usb_serial_port {
 	struct usb_serial	*serial;
-	struct tty_struct	*tty;
+	struct tty_port		port;
 	spinlock_t		lock;
 	struct mutex            mutex;
 	unsigned char		number;
@@ -89,7 +89,6 @@ struct usb_serial_port {
 
 	wait_queue_head_t	write_wait;
 	struct work_struct	work;
-	int			open_count;
 	char			throttled;
 	char			throttle_req;
 	char			console;
@@ -217,22 +216,27 @@ struct usb_serial_driver {
 	int (*resume)(struct usb_serial *serial);
 
 	/* serial function calls */
-	int  (*open)(struct usb_serial_port *port, struct file *filp);
-	void (*close)(struct usb_serial_port *port, struct file *filp);
-	int  (*write)(struct usb_serial_port *port, const unsigned char *buf,
-		      int count);
-	int  (*write_room)(struct usb_serial_port *port);
-	int  (*ioctl)(struct usb_serial_port *port, struct file *file,
+	/* Called by console with tty = NULL and by tty */
+	int  (*open)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+	void (*close)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+	/* Called only by the tty layer */
+	int  (*write_room)(struct tty_struct *tty);
+	int  (*ioctl)(struct tty_struct *tty, struct file *file,
 		      unsigned int cmd, unsigned long arg);
-	void (*set_termios)(struct usb_serial_port *port, struct ktermios *old);
-	void (*break_ctl)(struct usb_serial_port *port, int break_state);
-	int  (*chars_in_buffer)(struct usb_serial_port *port);
-	void (*throttle)(struct usb_serial_port *port);
-	void (*unthrottle)(struct usb_serial_port *port);
-	int  (*tiocmget)(struct usb_serial_port *port, struct file *file);
-	int  (*tiocmset)(struct usb_serial_port *port, struct file *file,
+	void (*set_termios)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+	void (*break_ctl)(struct tty_struct *tty, int break_state);
+	int  (*chars_in_buffer)(struct tty_struct *tty);
+	void (*throttle)(struct tty_struct *tty);
+	void (*unthrottle)(struct tty_struct *tty);
+	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
+	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
-
+	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
 	void (*read_bulk_callback)(struct urb *urb);
@@ -270,19 +274,19 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
 /* Functions needed by other parts of the usbserial core */
 extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
 extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open(struct usb_serial_port *port,
-				   struct file *filp);
-extern int usb_serial_generic_write(struct usb_serial_port *port,
-				    const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct usb_serial_port *port,
-				     struct file *filp);
+extern int usb_serial_generic_open(struct tty_struct *tty,
+		struct usb_serial_port *port, struct file *filp);
+extern int usb_serial_generic_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
-extern int usb_serial_generic_write_room(struct usb_serial_port *port);
-extern int usb_serial_generic_chars_in_buffer(struct usb_serial_port *port);
+extern int usb_serial_generic_write_room(struct tty_struct *tty);
+extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
 extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
-extern void usb_serial_generic_throttle(struct usb_serial_port *port);
-extern void usb_serial_generic_unthrottle(struct usb_serial_port *port);
+extern void usb_serial_generic_throttle(struct tty_struct *tty);
+extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
 extern void usb_serial_generic_shutdown(struct usb_serial *serial);
 extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 3118ede2c67b..0044d9b4cb85 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -22,8 +22,6 @@
  *
  *  History:
  *   0.1  04.01.2000  Created
- *
- *  $Id: usbdevice_fs.h,v 1.1 2000/01/06 18:40:41 tom Exp $
  */
 
 /*****************************************************************************/
diff --git a/include/linux/videodev.h b/include/linux/videodev.h
index 9385a566aed8..15a653d41132 100644
--- a/include/linux/videodev.h
+++ b/include/linux/videodev.h
@@ -17,6 +17,21 @@
 
 #if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
 
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+
 struct video_capability
 {
 	char name[32];
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 4a535ea1e123..e466bd54a50e 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -71,6 +71,11 @@
  */
 #define VIDEO_MAX_FRAME               32
 
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+   They will be removed from this header in the future. */
+
 #define VID_TYPE_CAPTURE	1	/* Can capture */
 #define VID_TYPE_TUNER		2	/* Can tune */
 #define VID_TYPE_TELETEXT	4	/* Does teletext */
@@ -85,14 +90,15 @@
 #define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
 #define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
 #define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+#endif
 
 /*
  *	M I S C E L L A N E O U S
  */
 
 /*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a,b,c,d)\
-	(((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24))
+#define v4l2_fourcc(a, b, c, d)\
+	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
 
 /*
  *	E N U M S
@@ -226,8 +232,7 @@ struct v4l2_fract {
 /*
  *	D R I V E R   C A P A B I L I T I E S
  */
-struct v4l2_capability
-{
+struct v4l2_capability {
 	__u8	driver[16];	/* i.e. "bttv" */
 	__u8	card[32];	/* i.e. "Hauppauge WinTV" */
 	__u8	bus_info[32];	/* "PCI:" + pci_name(pci_dev) */
@@ -246,6 +251,7 @@ struct v4l2_capability
 #define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
 #define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
 #define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
+#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
 
 #define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
 #define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
@@ -258,8 +264,7 @@ struct v4l2_capability
 /*
  *	V I D E O   I M A G E   F O R M A T
  */
-struct v4l2_pix_format
-{
+struct v4l2_pix_format {
 	__u32         		width;
 	__u32			height;
 	__u32			pixelformat;
@@ -271,64 +276,69 @@ struct v4l2_pix_format
 };
 
 /*      Pixel format         FOURCC                        depth  Description  */
-#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R','G','B','1') /*  8  RGB-3-3-2     */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R','4','4','4') /* 16  xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R','G','B','O') /* 16  RGB-5-5-5     */
-#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R','G','B','P') /* 16  RGB-5-6-5     */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R','G','B','Q') /* 16  RGB-5-5-5 BE  */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R','G','B','R') /* 16  RGB-5-6-5 BE  */
-#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B','G','R','3') /* 24  BGR-8-8-8     */
-#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R','G','B','3') /* 24  RGB-8-8-8     */
-#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B','G','R','4') /* 32  BGR-8-8-8-8   */
-#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R','G','B','4') /* 32  RGB-8-8-8-8   */
-#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G','R','E','Y') /*  8  Greyscale     */
-#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y','1','6',' ') /* 16  Greyscale     */
-#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P','A','L','8') /*  8  8-bit palette */
-#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y','V','U','9') /*  9  YVU 4:1:0     */
-#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y','V','1','2') /* 12  YVU 4:2:0     */
-#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y','U','Y','V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U','Y','V','Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4','2','2','P') /* 16  YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4','1','1','P') /* 16  YVU411 planar */
-#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y','4','1','P') /* 12  YUV 4:1:1     */
-#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y','4','4','4') /* 16  xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y','U','V','O') /* 16  YUV-5-5-5     */
-#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y','U','V','P') /* 16  YUV-5-6-5     */
-#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y','U','V','4') /* 32  YUV-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
 
 /* two planes -- one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N','V','1','2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N','V','2','1') /* 12  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
 
 /*  The following formats are not defined in the V4L2 specification */
-#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y','U','V','9') /*  9  YUV 4:1:0     */
-#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y','U','1','2') /* 12  YUV 4:2:0     */
-#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y','Y','U','V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H','I','2','4') /*  8  8-bit color   */
-#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H','M','1','2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
+#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
 
 /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B','A','8','1') /*  8  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B','Y','R','2') /* 16  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
 
 /* compressed formats */
-#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M','J','P','G') /* Motion-JPEG   */
-#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J','P','E','G') /* JFIF JPEG     */
-#define V4L2_PIX_FMT_DV       v4l2_fourcc('d','v','s','d') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M','P','E','G') /* MPEG-1/2/4    */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4    */
 
 /*  Vendor-specific formats   */
-#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W','N','V','A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P','W','C','1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E','6','2','5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
  */
-struct v4l2_fmtdesc
-{
+struct v4l2_fmtdesc {
 	__u32		    index;             /* Format number      */
 	enum v4l2_buf_type  type;              /* buffer type        */
 	__u32               flags;
@@ -344,21 +354,18 @@ struct v4l2_fmtdesc
 /*
  *	F R A M E   S I Z E   E N U M E R A T I O N
  */
-enum v4l2_frmsizetypes
-{
+enum v4l2_frmsizetypes {
 	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
 	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
 	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
 };
 
-struct v4l2_frmsize_discrete
-{
+struct v4l2_frmsize_discrete {
 	__u32			width;		/* Frame width [pixel] */
 	__u32			height;		/* Frame height [pixel] */
 };
 
-struct v4l2_frmsize_stepwise
-{
+struct v4l2_frmsize_stepwise {
 	__u32			min_width;	/* Minimum frame width [pixel] */
 	__u32			max_width;	/* Maximum frame width [pixel] */
 	__u32			step_width;	/* Frame width step size [pixel] */
@@ -367,8 +374,7 @@ struct v4l2_frmsize_stepwise
 	__u32			step_height;	/* Frame height step size [pixel] */
 };
 
-struct v4l2_frmsizeenum
-{
+struct v4l2_frmsizeenum {
 	__u32			index;		/* Frame size number */
 	__u32			pixel_format;	/* Pixel format */
 	__u32			type;		/* Frame size type the device supports. */
@@ -384,22 +390,19 @@ struct v4l2_frmsizeenum
 /*
  *	F R A M E   R A T E   E N U M E R A T I O N
  */
-enum v4l2_frmivaltypes
-{
+enum v4l2_frmivaltypes {
 	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
 	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
 	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
 };
 
-struct v4l2_frmival_stepwise
-{
+struct v4l2_frmival_stepwise {
 	struct v4l2_fract	min;		/* Minimum frame interval [s] */
 	struct v4l2_fract	max;		/* Maximum frame interval [s] */
 	struct v4l2_fract	step;		/* Frame interval step size [s] */
 };
 
-struct v4l2_frmivalenum
-{
+struct v4l2_frmivalenum {
 	__u32			index;		/* Frame format index */
 	__u32			pixel_format;	/* Pixel format */
 	__u32			width;		/* Frame width */
@@ -418,8 +421,7 @@ struct v4l2_frmivalenum
 /*
  *	T I M E C O D E
  */
-struct v4l2_timecode
-{
+struct v4l2_timecode {
 	__u32	type;
 	__u32	flags;
 	__u8	frames;
@@ -444,8 +446,7 @@ struct v4l2_timecode
 #define V4L2_TC_USERBITS_8BITCHARS	0x0008
 /* The above is based on SMPTE timecodes */
 
-struct v4l2_jpegcompression
-{
+struct v4l2_jpegcompression {
 	int quality;
 
 	int  APPn;              /* Number of APP segment to be written,
@@ -477,16 +478,14 @@ struct v4l2_jpegcompression
 /*
  *	M E M O R Y - M A P P I N G   B U F F E R S
  */
-struct v4l2_requestbuffers
-{
+struct v4l2_requestbuffers {
 	__u32			count;
 	enum v4l2_buf_type      type;
 	enum v4l2_memory        memory;
 	__u32			reserved[2];
 };
 
-struct v4l2_buffer
-{
+struct v4l2_buffer {
 	__u32			index;
 	enum v4l2_buf_type      type;
 	__u32			bytesused;
@@ -520,13 +519,12 @@ struct v4l2_buffer
 /*
  *	O V E R L A Y   P R E V I E W
  */
-struct v4l2_framebuffer
-{
+struct v4l2_framebuffer {
 	__u32			capability;
 	__u32			flags;
 /* FIXME: in theory we should pass something like PCI device + memory
  * region + offset instead of some physical address */
-	void*                   base;
+	void                    *base;
 	struct v4l2_pix_format	fmt;
 };
 /*  Flags for the 'capability' field. Read only */
@@ -545,14 +543,12 @@ struct v4l2_framebuffer
 #define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
 #define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
 
-struct v4l2_clip
-{
+struct v4l2_clip {
 	struct v4l2_rect        c;
 	struct v4l2_clip	__user *next;
 };
 
-struct v4l2_window
-{
+struct v4l2_window {
 	struct v4l2_rect        w;
 	enum v4l2_field  	field;
 	__u32			chromakey;
@@ -565,8 +561,7 @@ struct v4l2_window
 /*
  *	C A P T U R E   P A R A M E T E R S
  */
-struct v4l2_captureparm
-{
+struct v4l2_captureparm {
 	__u32		   capability;	  /*  Supported modes */
 	__u32		   capturemode;	  /*  Current mode */
 	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
@@ -579,8 +574,7 @@ struct v4l2_captureparm
 #define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
 #define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
 
-struct v4l2_outputparm
-{
+struct v4l2_outputparm {
 	__u32		   capability;	 /*  Supported modes */
 	__u32		   outputmode;	 /*  Current mode */
 	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
@@ -697,8 +691,7 @@ typedef __u64 v4l2_std_id;
 #define V4L2_STD_ALL            (V4L2_STD_525_60	|\
 				 V4L2_STD_625_50)
 
-struct v4l2_standard
-{
+struct v4l2_standard {
 	__u32		     index;
 	v4l2_std_id          id;
 	__u8		     name[24];
@@ -710,8 +703,7 @@ struct v4l2_standard
 /*
  *	V I D E O   I N P U T S
  */
-struct v4l2_input
-{
+struct v4l2_input {
 	__u32	     index;		/*  Which input */
 	__u8	     name[32];		/*  Label */
 	__u32	     type;		/*  Type of input */
@@ -748,8 +740,7 @@ struct v4l2_input
 /*
  *	V I D E O   O U T P U T S
  */
-struct v4l2_output
-{
+struct v4l2_output {
 	__u32	     index;		/*  Which output */
 	__u8	     name[32];		/*  Label */
 	__u32	     type;		/*  Type of output */
@@ -766,14 +757,12 @@ struct v4l2_output
 /*
  *	C O N T R O L S
  */
-struct v4l2_control
-{
+struct v4l2_control {
 	__u32		     id;
 	__s32		     value;
 };
 
-struct v4l2_ext_control
-{
+struct v4l2_ext_control {
 	__u32 id;
 	__u32 reserved2[2];
 	union {
@@ -783,8 +772,7 @@ struct v4l2_ext_control
 	};
 } __attribute__ ((packed));
 
-struct v4l2_ext_controls
-{
+struct v4l2_ext_controls {
 	__u32 ctrl_class;
 	__u32 count;
 	__u32 error_idx;
@@ -802,8 +790,7 @@ struct v4l2_ext_controls
 #define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
 
 /*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl
-{
+struct v4l2_queryctrl {
 	__u32		     id;
 	enum v4l2_ctrl_type  type;
 	__u8		     name[32];	/* Whatever */
@@ -816,8 +803,7 @@ struct v4l2_queryctrl
 };
 
 /*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu
-{
+struct v4l2_querymenu {
 	__u32		id;
 	__u32		index;
 	__u8		name[32];	/* Whatever */
@@ -1099,8 +1085,7 @@ enum  v4l2_exposure_auto_type {
 /*
  *	T U N I N G
  */
-struct v4l2_tuner
-{
+struct v4l2_tuner {
 	__u32                   index;
 	__u8			name[32];
 	enum v4l2_tuner_type    type;
@@ -1114,8 +1099,7 @@ struct v4l2_tuner
 	__u32			reserved[4];
 };
 
-struct v4l2_modulator
-{
+struct v4l2_modulator {
 	__u32			index;
 	__u8			name[32];
 	__u32			capability;
@@ -1148,19 +1132,25 @@ struct v4l2_modulator
 #define V4L2_TUNER_MODE_LANG1		0x0003
 #define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
 
-struct v4l2_frequency
-{
+struct v4l2_frequency {
 	__u32		      tuner;
 	enum v4l2_tuner_type  type;
 	__u32		      frequency;
 	__u32		      reserved[8];
 };
 
+struct v4l2_hw_freq_seek {
+	__u32		      tuner;
+	enum v4l2_tuner_type  type;
+	__u32		      seek_upward;
+	__u32		      wrap_around;
+	__u32		      reserved[8];
+};
+
 /*
  *	A U D I O
  */
-struct v4l2_audio
-{
+struct v4l2_audio {
 	__u32	index;
 	__u8	name[32];
 	__u32	capability;
@@ -1175,8 +1165,7 @@ struct v4l2_audio
 /*  Flags for the 'mode' field */
 #define V4L2_AUDMODE_AVL		0x00001
 
-struct v4l2_audioout
-{
+struct v4l2_audioout {
 	__u32	index;
 	__u8	name[32];
 	__u32	capability;
@@ -1240,8 +1229,7 @@ struct v4l2_encoder_cmd {
  */
 
 /* Raw VBI */
-struct v4l2_vbi_format
-{
+struct v4l2_vbi_format {
 	__u32	sampling_rate;		/* in 1 Hz */
 	__u32	offset;
 	__u32	samples_per_line;
@@ -1253,8 +1241,8 @@ struct v4l2_vbi_format
 };
 
 /*  VBI flags  */
-#define V4L2_VBI_UNSYNC		(1<< 0)
-#define V4L2_VBI_INTERLACED	(1<< 1)
+#define V4L2_VBI_UNSYNC		(1 << 0)
+#define V4L2_VBI_INTERLACED	(1 << 1)
 
 /* Sliced VBI
  *
@@ -1263,8 +1251,7 @@ struct v4l2_vbi_format
  * notice in the definitive implementation.
  */
 
-struct v4l2_sliced_vbi_format
-{
+struct v4l2_sliced_vbi_format {
 	__u16   service_set;
 	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
 	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
@@ -1288,8 +1275,7 @@ struct v4l2_sliced_vbi_format
 #define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
 #define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
 
-struct v4l2_sliced_vbi_cap
-{
+struct v4l2_sliced_vbi_cap {
 	__u16   service_set;
 	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
 	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
@@ -1300,8 +1286,7 @@ struct v4l2_sliced_vbi_cap
 	__u32   reserved[3];    /* must be 0 */
 };
 
-struct v4l2_sliced_vbi_data
-{
+struct v4l2_sliced_vbi_data {
 	__u32   id;
 	__u32   field;          /* 0: first field, 1: second field */
 	__u32   line;           /* 1-23 */
@@ -1315,27 +1300,23 @@ struct v4l2_sliced_vbi_data
 
 /*	Stream data format
  */
-struct v4l2_format
-{
+struct v4l2_format {
 	enum v4l2_buf_type type;
-	union
-	{
-		struct v4l2_pix_format		pix;     // V4L2_BUF_TYPE_VIDEO_CAPTURE
-		struct v4l2_window		win;     // V4L2_BUF_TYPE_VIDEO_OVERLAY
-		struct v4l2_vbi_format		vbi;     // V4L2_BUF_TYPE_VBI_CAPTURE
-		struct v4l2_sliced_vbi_format	sliced;  // V4L2_BUF_TYPE_SLICED_VBI_CAPTURE
-		__u8	raw_data[200];                   // user-defined
+	union {
+		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
+		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+		__u8	raw_data[200];                   /* user-defined */
 	} fmt;
 };
 
 
 /*	Stream type-dependent parameters
  */
-struct v4l2_streamparm
-{
+struct v4l2_streamparm {
 	enum v4l2_buf_type type;
-	union
-	{
+	union {
 		struct v4l2_captureparm	capture;
 		struct v4l2_outputparm	output;
 		__u8	raw_data[200];  /* user-defined */
@@ -1373,91 +1354,86 @@ struct v4l2_chip_ident {
  *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
  *
  */
-#define VIDIOC_QUERYCAP		_IOR  ('V',  0, struct v4l2_capability)
-#define VIDIOC_RESERVED		_IO   ('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR ('V',  2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT		_IOWR ('V',  4, struct v4l2_format)
-#define VIDIOC_S_FMT		_IOWR ('V',  5, struct v4l2_format)
-#define VIDIOC_REQBUFS		_IOWR ('V',  8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF		_IOWR ('V',  9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF		_IOR  ('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF		_IOW  ('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY		_IOW  ('V', 14, int)
-#define VIDIOC_QBUF		_IOWR ('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF		_IOWR ('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON		_IOW  ('V', 18, int)
-#define VIDIOC_STREAMOFF	_IOW  ('V', 19, int)
-#define VIDIOC_G_PARM		_IOWR ('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM		_IOWR ('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD		_IOR  ('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD		_IOW  ('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD		_IOWR ('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT	_IOWR ('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL		_IOWR ('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL		_IOWR ('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER		_IOWR ('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER		_IOW  ('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO		_IOR  ('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO		_IOW  ('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL	_IOWR ('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU	_IOWR ('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT		_IOR  ('V', 38, int)
-#define VIDIOC_S_INPUT		_IOWR ('V', 39, int)
-#define VIDIOC_G_OUTPUT		_IOR  ('V', 46, int)
-#define VIDIOC_S_OUTPUT		_IOWR ('V', 47, int)
-#define VIDIOC_ENUMOUTPUT	_IOWR ('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT		_IOR  ('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT		_IOW  ('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR	_IOWR ('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR	_IOW  ('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY	_IOWR ('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY	_IOW  ('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP		_IOWR ('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP		_IOWR ('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP		_IOW  ('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP	_IOR  ('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP	_IOW  ('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD      	_IOR  ('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT      	_IOWR ('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO	_IOWR ('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT	_IOWR ('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY       _IOR  ('V', 67, enum v4l2_priority)
-#define VIDIOC_S_PRIORITY       _IOW  ('V', 68, enum v4l2_priority)
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR ('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS       _IO   ('V', 70)
-#define VIDIOC_G_EXT_CTRLS	_IOWR ('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS	_IOWR ('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS	_IOWR ('V', 73, struct v4l2_ext_controls)
+#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED		  _IO('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
+#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
+#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON		 _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
+#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
+#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY        _IOR('V', 67, enum v4l2_priority)
+#define VIDIOC_S_PRIORITY        _IOW('V', 68, enum v4l2_priority)
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS         _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
 #if 1
-#define VIDIOC_ENUM_FRAMESIZES	_IOWR ('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS	_IOWR ('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX      _IOR  ('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD      _IOWR ('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR ('V', 78, struct v4l2_encoder_cmd)
+#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
 
 /* Experimental, only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
-#define	VIDIOC_DBG_S_REGISTER 	_IOW  ('V', 79, struct v4l2_register)
-#define	VIDIOC_DBG_G_REGISTER 	_IOWR ('V', 80, struct v4l2_register)
+#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_register)
+#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_register)
 
-#define VIDIOC_G_CHIP_IDENT     _IOWR ('V', 81, struct v4l2_chip_ident)
+#define VIDIOC_G_CHIP_IDENT     _IOWR('V', 81, struct v4l2_chip_ident)
 #endif
+#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
 
 #ifdef __OLD_VIDIOC_
 /* for compatibility, will go away some day */
-#define VIDIOC_OVERLAY_OLD     	_IOWR ('V', 14, int)
-#define VIDIOC_S_PARM_OLD      	_IOW  ('V', 22, struct v4l2_streamparm)
-#define VIDIOC_S_CTRL_OLD      	_IOW  ('V', 28, struct v4l2_control)
-#define VIDIOC_G_AUDIO_OLD     	_IOWR ('V', 33, struct v4l2_audio)
-#define VIDIOC_G_AUDOUT_OLD    	_IOWR ('V', 49, struct v4l2_audioout)
-#define VIDIOC_CROPCAP_OLD     	_IOR  ('V', 58, struct v4l2_cropcap)
+#define VIDIOC_OVERLAY_OLD     	_IOWR('V', 14, int)
+#define VIDIOC_S_PARM_OLD      	 _IOW('V', 22, struct v4l2_streamparm)
+#define VIDIOC_S_CTRL_OLD      	 _IOW('V', 28, struct v4l2_control)
+#define VIDIOC_G_AUDIO_OLD     	_IOWR('V', 33, struct v4l2_audio)
+#define VIDIOC_G_AUDOUT_OLD    	_IOWR('V', 49, struct v4l2_audioout)
+#define VIDIOC_CROPCAP_OLD     	 _IOR('V', 58, struct v4l2_cropcap)
 #endif
 
 #define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
 
 #endif /* __LINUX_VIDEODEV2_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/videotext.h b/include/linux/videotext.h
index 018f92047ff8..3e68c8d1c7f7 100644
--- a/include/linux/videotext.h
+++ b/include/linux/videotext.h
@@ -45,10 +45,10 @@
 #define VTXIOCCLRCACHE_OLD 0x710b  /* clear cache on VTX-interface (if avail.) */
 #define VTXIOCSETVIRT_OLD  0x710c  /* turn on virtual mode (this disables TV-display) */
 
-/* 
+/*
  *	Definitions for VTXIOCGETINFO
  */
- 
+
 #define SAA5243 0
 #define SAA5246 1
 #define SAA5249 2
@@ -57,10 +57,10 @@
 
 typedef struct {
 	int version_major, version_minor;	/* version of driver; if version_major changes, driver */
-						/* is not backward compatible!!! CHECK THIS!!! */  
+						/* is not backward compatible!!! CHECK THIS!!! */
 	int numpages;				/* number of page-buffers of vtx-chipset */
 	int cct_type;				/* type of vtx-chipset (SAA5243, SAA5246, SAA5248 or
-  						 * SAA5249) */
+						 * SAA5249) */
 }
 vtx_info_t;
 
@@ -81,7 +81,7 @@ vtx_info_t;
 #define PGMASK_HOUR (HR_TEN | HR_UNIT)
 #define PGMASK_MINUTE (MIN_TEN | MIN_UNIT)
 
-typedef struct 
+typedef struct
 {
 	int page;	/* number of requested page (hexadecimal) */
 	int hour;	/* requested hour (hexadecimal) */
@@ -98,11 +98,11 @@ vtx_pagereq_t;
 /*
  *	Definitions for VTXIOC{GETSTAT,PUTSTAT}
  */
- 
+
 #define VTX_PAGESIZE (40 * 24)
 #define VTX_VIRTUALSIZE (40 * 49)
 
-typedef struct 
+typedef struct
 {
 	int pagenum;			/* number of page (hexadecimal) */
 	int hour;			/* hour (hexadecimal) */
@@ -121,5 +121,5 @@ typedef struct
 	unsigned hamming : 1;		/* hamming-error occurred */
 }
 vtx_pageinfo_t;
- 
+
 #endif /* _VTX_H */
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
index 8eff0b53910b..b3c4a60ceeb3 100644
--- a/include/linux/virtio_9p.h
+++ b/include/linux/virtio_9p.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_9P_H
 #define _LINUX_VIRTIO_9P_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio console */
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
index 979524ee75b7..c30c7bfbf39b 100644
--- a/include/linux/virtio_balloon.h
+++ b/include/linux/virtio_balloon.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_BALLOON_H
 #define _LINUX_VIRTIO_BALLOON_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_balloon */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 5f79a5f9de79..c1aef85243bf 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_BLK_H
 #define _LINUX_VIRTIO_BLK_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_block */
@@ -11,6 +13,7 @@
 #define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
 #define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
 #define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
 
 struct virtio_blk_config
 {
@@ -26,6 +29,8 @@ struct virtio_blk_config
 		__u8 heads;
 		__u8 sectors;
 	} geometry;
+	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+	__u32 blk_size;
 } __attribute__((packed));
 
 /* These two define direction. */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index f364bbf63c34..bf8ec283b232 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,5 +1,8 @@
 #ifndef _LINUX_VIRTIO_CONFIG_H
 #define _LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers. */
+
 /* Virtio devices use a standardized configuration space to define their
  * features and pass configuration information, but each implementation can
  * store and access that space differently. */
@@ -15,6 +18,12 @@
 /* We've given up on this device. */
 #define VIRTIO_CONFIG_S_FAILED		0x80
 
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START	28
+#define VIRTIO_TRANSPORT_F_END		32
+
 /* Do we get callbacks when the ring is completely used, even if we've
  * suppressed them? */
 #define VIRTIO_F_NOTIFY_ON_EMPTY	24
@@ -52,9 +61,10 @@
  * @get_features: get the array of feature bits for this device.
  *	vdev: the virtio_device
  *	Returns the first 32 feature bits (all we currently need).
- * @set_features: confirm what device features we'll be using.
+ * @finalize_features: confirm what device features we'll be using.
  *	vdev: the virtio_device
- *	feature: the first 32 feature bits
+ *	This gives the final feature bits for the device: it can change
+ *	the dev->feature bits if it wants.
  */
 struct virtio_config_ops
 {
@@ -70,7 +80,7 @@ struct virtio_config_ops
 				     void (*callback)(struct virtqueue *));
 	void (*del_vq)(struct virtqueue *vq);
 	u32 (*get_features)(struct virtio_device *vdev);
-	void (*set_features)(struct virtio_device *vdev, u32 features);
+	void (*finalize_features)(struct virtio_device *vdev);
 };
 
 /* If driver didn't advertise the feature, it will never appear. */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index ed2d4ead7eb7..19a0da0dba41 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_VIRTIO_CONSOLE_H
 #define _LINUX_VIRTIO_CONSOLE_H
 #include <linux/virtio_config.h>
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers. */
 
 /* The ID for virtio console */
 #define VIRTIO_ID_CONSOLE	3
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 38c0571820fb..5e33761b9b8a 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_NET_H
 #define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_net */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
index b3151659cf49..cdef35742932 100644
--- a/include/linux/virtio_pci.h
+++ b/include/linux/virtio_pci.h
@@ -9,9 +9,8 @@
  * Authors:
  *  Anthony Liguori  <aliguori@us.ibm.com>
  *
- * This work is licensed under the terms of the GNU GPL, version 2 or later.
- * See the COPYING file in the top-level directory.
- *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
  */
 
 #ifndef _LINUX_VIRTIO_PCI_H
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index abe481ed990e..c4a598fb3826 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -120,6 +120,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num,
 				      void (*notify)(struct virtqueue *vq),
 				      void (*callback)(struct virtqueue *vq));
 void vring_del_virtqueue(struct virtqueue *vq);
+/* Filter out transport-specific feature bits. */
+void vring_transport_features(struct virtio_device *vdev);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);
 #endif /* __KERNEL__ */
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
index 331afb6c9f62..1a85dab8a940 100644
--- a/include/linux/virtio_rng.h
+++ b/include/linux/virtio_rng.h
@@ -1,5 +1,7 @@
 #ifndef _LINUX_VIRTIO_RNG_H
 #define _LINUX_VIRTIO_RNG_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
 #include <linux/virtio_config.h>
 
 /* The ID for virtio_rng */
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index e83b69346d23..58334d439516 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -44,6 +44,12 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 		NR_VM_EVENT_ITEMS
 };
 
+extern const struct seq_operations fragmentation_op;
+extern const struct seq_operations pagetypeinfo_op;
+extern const struct seq_operations zoneinfo_op;
+extern const struct seq_operations vmstat_op;
+extern int sysctl_stat_interval;
+
 #ifdef CONFIG_VM_EVENT_COUNTERS
 /*
  * Light weight per cpu counter implementation.
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 9448ffbdcbf6..1c78d56c57e5 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -12,6 +12,7 @@
 #include <linux/mutex.h>
 #include <linux/console_struct.h>
 #include <linux/mm.h>
+#include <linux/consolemap.h>
 
 /*
  * Presently, a lot of graphics programs do not restore the contents of
@@ -54,6 +55,7 @@ void redraw_screen(struct vc_data *vc, int is_switch);
 struct tty_struct;
 int tioclinux(struct tty_struct *tty, unsigned long arg);
 
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
 /* consolemap.c */
 
 struct unimapinit;
@@ -71,6 +73,24 @@ void con_free_unimap(struct vc_data *vc);
 void con_protect_unimap(struct vc_data *vc, int rdonly);
 int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
 
+#define vc_translate(vc, c) ((vc)->vc_translate[(c) |			\
+					((vc)->vc_toggle_meta ? 0x80 : 0)])
+#else
+#define con_set_trans_old(arg) (0)
+#define con_get_trans_old(arg) (-EINVAL)
+#define con_set_trans_new(arg) (0)
+#define con_get_trans_new(arg) (-EINVAL)
+#define con_clear_unimap(vc, ui) (0)
+#define con_set_unimap(vc, ct, list) (0)
+#define con_set_default_unimap(vc) (0)
+#define con_copy_unimap(d, s) (0)
+#define con_get_unimap(vc, ct, uct, list) (-EINVAL)
+#define con_free_unimap(vc) do { ; } while (0)
+#define con_protect_unimap(vc, rdonly) do { ; } while (0)
+
+#define vc_translate(vc, c) (c)
+#endif
+
 /* vt.c */
 int vt_waitactive(int vt);
 void change_console(struct vc_data *new_vc);
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index 3add87465b1f..e0aa39612eba 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -522,7 +522,7 @@ extern int wanrouter_proc_init(void);
 extern void wanrouter_proc_cleanup(void);
 extern int wanrouter_proc_add(struct wan_device *wandev);
 extern int wanrouter_proc_delete(struct wan_device *wandev);
-extern int wanrouter_ioctl( struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
+extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 
 /* Public Data */
 /* list of registered devices */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 0a9b5b41ed67..d7958f9b52cb 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -611,6 +611,7 @@
 #define IW_ENCODE_ALG_WEP	1
 #define IW_ENCODE_ALG_TKIP	2
 #define IW_ENCODE_ALG_CCMP	3
+#define IW_ENCODE_ALG_PMK	4
 /* struct iw_encode_ext ->ext_flags */
 #define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
 #define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
@@ -630,6 +631,7 @@
 #define IW_ENC_CAPA_WPA2	0x00000002
 #define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
 #define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
 
 /* Event capability macros - in (struct iw_range *)->event_capa
  * Because we have more than 32 possible events, we use an array of
@@ -675,6 +677,19 @@ struct	iw_point
   __u16		flags;		/* Optional params */
 };
 
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+#include <linux/compat.h>
+
+struct compat_iw_point {
+	compat_caddr_t pointer;
+	__u16 length;
+	__u16 flags;
+};
+#endif
+#endif
+
 /*
  *	A frequency
  *	For numbers lower than 10^9, we encode the number in 'm' and
@@ -1098,6 +1113,21 @@ struct iw_event
 #define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
 			 IW_EV_POINT_OFF)
 
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+struct __compat_iw_event {
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	compat_caddr_t	pointer;
+};
+#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer)
+#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length)
+#define IW_EV_COMPAT_POINT_LEN	\
+	(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
+	 IW_EV_COMPAT_POINT_OFF)
+#endif
+#endif
+
 /* Size of the Event prefix when packed in stream */
 #define IW_EV_LCP_PK_LEN	(4)
 /* Size of the various events when packed in stream */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 542526c6e8ef..5c158c477ac7 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -179,6 +179,8 @@ __create_workqueue_key(const char *name, int singlethread,
 extern void destroy_workqueue(struct workqueue_struct *wq);
 
 extern int queue_work(struct workqueue_struct *wq, struct work_struct *work);
+extern int queue_work_on(int cpu, struct workqueue_struct *wq,
+			struct work_struct *work);
 extern int queue_delayed_work(struct workqueue_struct *wq,
 			struct delayed_work *work, unsigned long delay);
 extern int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
@@ -188,6 +190,7 @@ extern void flush_workqueue(struct workqueue_struct *wq);
 extern void flush_scheduled_work(void);
 
 extern int schedule_work(struct work_struct *work);
+extern int schedule_work_on(int cpu, struct work_struct *work);
 extern int schedule_delayed_work(struct delayed_work *work, unsigned long delay);
 extern int schedule_delayed_work_on(int cpu, struct delayed_work *work,
 					unsigned long delay);
@@ -198,6 +201,8 @@ extern int keventd_up(void);
 extern void init_workqueues(void);
 int execute_in_process_context(work_func_t fn, struct execute_work *);
 
+extern int flush_work(struct work_struct *work);
+
 extern int cancel_work_sync(struct work_struct *work);
 
 /*
diff --git a/include/media/audiochip.h b/include/media/audiochip.h
deleted file mode 100644
index db8823d45a7d..000000000000
--- a/include/media/audiochip.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- */
-
-#ifndef AUDIOCHIP_H
-#define AUDIOCHIP_H
-
-enum audiochip {
-	AUDIO_CHIP_NONE,
-	AUDIO_CHIP_UNKNOWN,
-	/* Provided by video chip */
-	AUDIO_CHIP_INTERNAL,
-	/* Provided by tvaudio.c */
-	AUDIO_CHIP_TDA8425,
-	AUDIO_CHIP_TEA6300,
-	AUDIO_CHIP_TEA6420,
-	AUDIO_CHIP_TDA9840,
-	AUDIO_CHIP_TDA985X,
-	AUDIO_CHIP_TDA9874,
-	AUDIO_CHIP_PIC16C54,
-	/* Provided by msp3400.c */
-	AUDIO_CHIP_MSP34XX,
-	/* Provided by wm8775.c */
-	AUDIO_CHIP_WM8775
-};
-
-#endif /* AUDIOCHIP_H */
diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h
index 5f4608e88476..9ec4d5889ef5 100644
--- a/include/media/cx2341x.h
+++ b/include/media/cx2341x.h
@@ -27,6 +27,7 @@ enum cx2341x_port {
 
 enum cx2341x_cap {
 	CX2341X_CAP_HAS_SLICED_VBI = 1 << 0,
+	CX2341X_CAP_HAS_TS 	   = 1 << 1,
 };
 
 struct cx2341x_mpeg_params {
@@ -88,13 +89,13 @@ typedef int (*cx2341x_mbox_func)(void *priv, u32 cmd, int in, int out,
 int cx2341x_update(void *priv, cx2341x_mbox_func func,
 		const struct cx2341x_mpeg_params *old,
 		const struct cx2341x_mpeg_params *new);
-int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params,
+int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
 		struct v4l2_queryctrl *qctrl);
-const char **cx2341x_ctrl_get_menu(u32 id);
+const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
 int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
 		struct v4l2_ext_controls *ctrls, unsigned int cmd);
 void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
-void cx2341x_log_status(struct cx2341x_mpeg_params *p, const char *prefix);
+void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix);
 
 /* Firmware names */
 #define CX2341X_FIRM_ENC_FILENAME "v4l-cx2341x-enc.fw"
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index a455f7ce5ee8..00fa57eb9fde 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -19,7 +19,4 @@ struct IR_i2c {
 	char                   phys[32];
 	int                    (*get_key)(struct IR_i2c*, u32*, u32*);
 };
-
-int get_key_pinnacle_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
-int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
 #endif
diff --git a/include/media/pwc-ioctl.h b/include/media/pwc-ioctl.h
index adc1254e887e..0f19779c4634 100644
--- a/include/media/pwc-ioctl.h
+++ b/include/media/pwc-ioctl.h
@@ -55,8 +55,7 @@
 #include <linux/types.h>
 #include <linux/version.h>
 
-
- /* Enumeration of image sizes */
+/* Enumeration of image sizes */
 #define PSZ_SQCIF	0x00
 #define PSZ_QSIF	0x01
 #define PSZ_QCIF	0x02
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 88b2b5a619aa..2f68f4cd0037 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -53,7 +53,7 @@ struct saa7146_vv;
 /* saa7146 page table */
 struct saa7146_pgtable {
 	unsigned int	size;
-	u32		*cpu;
+	__le32		*cpu;
 	dma_addr_t	dma;
 	/* used for offsets for u,v planes for planar capture modes */
 	unsigned long	offset;
@@ -101,7 +101,7 @@ struct saa7146_extension
 struct saa7146_dma
 {
 	dma_addr_t	dma_handle;
-	u32		*cpu_addr;
+	__le32		*cpu_addr;
 };
 
 struct saa7146_dev
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
index 89c442eb8849..1d104096619c 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/saa7146_vv.h
@@ -2,6 +2,7 @@
 #define __SAA7146_VV__
 
 #include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
 #include <media/saa7146.h>
 #include <media/videobuf-dma-sg.h>
 
diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h
new file mode 100644
index 000000000000..234a4711d2ec
--- /dev/null
+++ b/include/media/sh_mobile_ceu.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_SH_MOBILE_CEU_H__
+#define __ASM_SH_MOBILE_CEU_H__
+
+#include <media/soc_camera.h>
+
+struct sh_mobile_ceu_info {
+	unsigned long flags; /* SOCAM_... */
+	void (*enable_camera)(void);
+	void (*disable_camera)(void);
+};
+
+#endif /* __ASM_SH_MOBILE_CEU_H__ */
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 6a8c8be7a1ae..d548de326722 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -13,7 +13,8 @@
 #define SOC_CAMERA_H
 
 #include <linux/videodev2.h>
-#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-core.h>
+#include <linux/pm.h>
 
 struct soc_camera_device {
 	struct list_head list;
@@ -48,15 +49,12 @@ struct soc_camera_device {
 struct soc_camera_file {
 	struct soc_camera_device *icd;
 	struct videobuf_queue vb_vidq;
-	spinlock_t *lock;
 };
 
 struct soc_camera_host {
 	struct list_head list;
 	struct device dev;
 	unsigned char nr;				/* Host number */
-	size_t msize;
-	struct videobuf_queue_ops *vbq_ops;
 	void *priv;
 	char *drv_name;
 	struct soc_camera_host_ops *ops;
@@ -66,16 +64,18 @@ struct soc_camera_host_ops {
 	struct module *owner;
 	int (*add)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
+	int (*suspend)(struct soc_camera_device *, pm_message_t state);
+	int (*resume)(struct soc_camera_device *);
 	int (*set_fmt_cap)(struct soc_camera_device *, __u32,
 			   struct v4l2_rect *);
 	int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *);
+	void (*init_videobuf)(struct videobuf_queue *,
+			      struct soc_camera_device *);
 	int (*reqbufs)(struct soc_camera_file *, struct v4l2_requestbuffers *);
 	int (*querycap)(struct soc_camera_host *, struct v4l2_capability *);
 	int (*try_bus_param)(struct soc_camera_device *, __u32);
 	int (*set_bus_param)(struct soc_camera_device *, __u32);
 	unsigned int (*poll)(struct file *, poll_table *);
-	spinlock_t* (*spinlock_alloc)(struct soc_camera_file *);
-	void (*spinlock_free)(spinlock_t *);
 };
 
 struct soc_camera_link {
@@ -114,6 +114,8 @@ struct soc_camera_ops {
 	struct module *owner;
 	int (*probe)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
+	int (*suspend)(struct soc_camera_device *, pm_message_t state);
+	int (*resume)(struct soc_camera_device *);
 	int (*init)(struct soc_camera_device *);
 	int (*release)(struct soc_camera_device *);
 	int (*start_capture)(struct soc_camera_device *);
@@ -156,11 +158,12 @@ static inline struct v4l2_queryctrl const *soc_camera_find_qctrl(
 #define SOCAM_DATAWIDTH_8		(1 << 6)
 #define SOCAM_DATAWIDTH_9		(1 << 7)
 #define SOCAM_DATAWIDTH_10		(1 << 8)
-#define SOCAM_PCLK_SAMPLE_RISING	(1 << 9)
-#define SOCAM_PCLK_SAMPLE_FALLING	(1 << 10)
+#define SOCAM_DATAWIDTH_16		(1 << 9)
+#define SOCAM_PCLK_SAMPLE_RISING	(1 << 10)
+#define SOCAM_PCLK_SAMPLE_FALLING	(1 << 11)
 
 #define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_9 | \
-			      SOCAM_DATAWIDTH_10)
+			      SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_16)
 
 static inline unsigned long soc_camera_bus_param_compatible(
 			unsigned long camera_flags, unsigned long bus_flags)
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
new file mode 100644
index 000000000000..851f18220984
--- /dev/null
+++ b/include/media/soc_camera_platform.h
@@ -0,0 +1,15 @@
+#ifndef __SOC_CAMERA_H__
+#define __SOC_CAMERA_H__
+
+#include <linux/videodev2.h>
+
+struct soc_camera_platform_info {
+	int iface;
+	char *format_name;
+	unsigned long format_depth;
+	struct v4l2_pix_format format;
+	unsigned long bus_param;
+	int (*set_capture)(struct soc_camera_platform_info *info, int enable);
+};
+
+#endif /* __SOC_CAMERA_H__ */
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
index 5660ea24996b..a8ad75a9152a 100644
--- a/include/media/tveeprom.h
+++ b/include/media/tveeprom.h
@@ -3,7 +3,12 @@
 
 struct tveeprom {
 	u32 has_radio;
-	u32 has_ir;     /* bit 0: IR receiver present, bit 1: IR transmitter (blaster) present. -1 == unknown */
+	/* If has_ir == 0, then it is unknown what the IR capabilities are,
+	   otherwise:
+	   bit 0: 1 (= IR capabilities are known)
+	   bit 1: IR receiver present
+	   bit 2: IR transmitter (blaster) present */
+	u32 has_ir;
 	u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
 
 	u32 tuner_type;
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 2a527742701a..41b509babf3f 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -90,7 +90,10 @@ enum {
 	/* module m52790: just ident 52790 */
 	V4L2_IDENT_M52790 = 52790,
 
-	/* module msp34xx: reserved range 34000-34999 */
+	/* module msp3400: reserved range 34000-34999 and 44000-44999 */
+	V4L2_IDENT_MSPX4XX  = 34000, /* generic MSPX4XX identifier, only
+					use internally (tveeprom.c). */
+
 	V4L2_IDENT_MSP3400B = 34002,
 	V4L2_IDENT_MSP3410B = 34102,
 
@@ -142,7 +145,7 @@ enum {
 	V4L2_IDENT_MSP3457G = 34577,
 	V4L2_IDENT_MSP3467G = 34677,
 
-	/* module msp44xx: reserved range 44000-44999 */
+	/* module msp3400: reserved range 34000-34999 and 44000-44999 */
 	V4L2_IDENT_MSP4400G = 44007,
 	V4L2_IDENT_MSP4410G = 44107,
 	V4L2_IDENT_MSP4420G = 44207,
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 020d05758bd8..07d3a9a575d1 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -28,12 +28,6 @@
 
 #include <media/v4l2-dev.h>
 
-/* v4l debugging and diagnostics */
-
-/* Debug bitmask flags to be used on V4L2 */
-#define V4L2_DEBUG_IOCTL     0x01
-#define V4L2_DEBUG_IOCTL_ARG 0x02
-
 /* Common printk constucts for v4l-i2c drivers. These macros create a unique
    prefix consisting of the driver name, the adapter number and the i2c
    address. */
@@ -61,21 +55,20 @@
 			v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
 	} while (0)
 
+/* ------------------------------------------------------------------------- */
 
-/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
-#define v4l_print_ioctl(name, cmd)  		 \
-	do {  					 \
-		printk(KERN_DEBUG "%s: ", name); \
-		v4l_printk_ioctl(cmd);		 \
-	} while (0)
+/* Priority helper functions */
 
-/* Use this macro in I2C drivers where 'client' is the struct i2c_client
-   pointer */
-#define v4l_i2c_print_ioctl(client, cmd) 		   \
-	do {      					   \
-		v4l_client_printk(KERN_DEBUG, client, ""); \
-		v4l_printk_ioctl(cmd);			   \
-	} while (0)
+struct v4l2_prio_state {
+	atomic_t prios[4];
+};
+int v4l2_prio_init(struct v4l2_prio_state *global);
+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
+		     enum v4l2_priority new);
+int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
+int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local);
+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local);
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index 859f7a6f6f67..2745e1afc722 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -9,7 +9,6 @@
 #ifndef _V4L2_DEV_H
 #define _V4L2_DEV_H
 
-#define OBSOLETE_OWNER   1 /* to be removed soon */
 #define OBSOLETE_DEVDATA 1 /* to be removed soon */
 
 #include <linux/poll.h>
@@ -17,11 +16,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#include <linux/videodev.h>
-#else
 #include <linux/videodev2.h>
-#endif
 
 #define VIDEO_MAJOR	81
 /* Minor device allocation */
@@ -39,42 +34,7 @@
 #define VFL_TYPE_RADIO		2
 #define VFL_TYPE_VTX		3
 
-/*  Video standard functions  */
-extern const char *v4l2_norm_to_name(v4l2_std_id id);
-extern int v4l2_video_std_construct(struct v4l2_standard *vs,
-				    int id, const char *name);
-/* Prints the ioctl in a human-readable format */
-extern void v4l_printk_ioctl(unsigned int cmd);
-
-/* prority handling */
-struct v4l2_prio_state {
-	atomic_t prios[4];
-};
-int v4l2_prio_init(struct v4l2_prio_state *global);
-int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
-		     enum v4l2_priority new);
-int v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
-int v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority *local);
-enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
-int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local);
-
-/* names for fancy debug output */
-extern char *v4l2_field_names[];
-extern char *v4l2_type_names[];
-
-/*  Compatibility layer interface  --  v4l1-compat module */
-typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
-			   unsigned int cmd, void *arg);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
-			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
-#else
-#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
-#endif
-
-/* 32 Bits compatibility layer for 64 bits processors */
-extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
-				unsigned long arg);
+struct v4l2_ioctl_callbacks;
 
 /*
  * Newer version of video_device, handled by videodev2.c
@@ -88,16 +48,17 @@ struct video_device
 	const struct file_operations *fops;
 
 	/* sysfs */
-	struct device class_dev;	/* v4l device */
-	struct device *dev;		/* device parent */
+	struct device dev;		/* v4l device */
+	struct device *parent;		/* device parent */
 
 	/* device info */
 	char name[32];
-	int type;       /* v4l1 */
-	int type2;      /* v4l2 */
+	int vfl_type;
 	int minor;
+	/* attribute to differentiate multiple indices on one physical device */
+	int index;
 
-	int debug;	/* Activates debug level*/
+	int debug;			/* Activates debug level*/
 
 	/* Video standard vars */
 	v4l2_std_id tvnorms;		/* Supported tv norms */
@@ -107,278 +68,36 @@ struct video_device
 	void (*release)(struct video_device *vfd);
 
 	/* ioctl callbacks */
+	const struct v4l2_ioctl_ops *ioctl_ops;
 
-	/* VIDIOC_QUERYCAP handler */
-	int (*vidioc_querycap)(struct file *file, void *fh, struct v4l2_capability *cap);
-
-	/* Priority handling */
-	int (*vidioc_g_priority)   (struct file *file, void *fh,
-				    enum v4l2_priority *p);
-	int (*vidioc_s_priority)   (struct file *file, void *fh,
-				    enum v4l2_priority p);
-
-	/* VIDIOC_ENUM_FMT handlers */
-	int (*vidioc_enum_fmt_cap)         (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_overlay)     (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_vbi)         (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_vbi_capture) (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_video_output)(struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_output_overlay) (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_vbi_output)  (struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-	int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh,
-					    struct v4l2_fmtdesc *f);
-
-	/* VIDIOC_G_FMT handlers */
-	int (*vidioc_g_fmt_cap)        (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_overlay)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vbi)        (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vbi_output) (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_vbi_capture)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_video_output)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_output_overlay) (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_g_fmt_type_private)(struct file *file, void *fh,
-					struct v4l2_format *f);
-
-	/* VIDIOC_S_FMT handlers */
-	int (*vidioc_s_fmt_cap)        (struct file *file, void *fh,
-					struct v4l2_format *f);
-
-	int (*vidioc_s_fmt_overlay)    (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vbi)        (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vbi_output) (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_vbi_capture)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_video_output)(struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_output_overlay) (struct file *file, void *fh,
-					struct v4l2_format *f);
-	int (*vidioc_s_fmt_type_private)(struct file *file, void *fh,
-					struct v4l2_format *f);
-
-	/* VIDIOC_TRY_FMT handlers */
-	int (*vidioc_try_fmt_cap)        (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_overlay)    (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vbi)        (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vbi_output) (struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_vbi_capture)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_video_output)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_output_overlay)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-	int (*vidioc_try_fmt_type_private)(struct file *file, void *fh,
-					  struct v4l2_format *f);
-
-	/* Buffer handlers */
-	int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
-	int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b);
-	int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
-	int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
-
-
-	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-			/* buffer type is struct vidio_mbuf * */
-	int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
-#endif
-	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
-				struct v4l2_framebuffer *a);
-	int (*vidioc_s_fbuf)   (struct file *file, void *fh,
-				struct v4l2_framebuffer *a);
-
-		/* Stream on/off */
-	int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i);
-	int (*vidioc_streamoff)(struct file *file, void *fh, enum v4l2_buf_type i);
-
-		/* Standard handling
-			G_STD and ENUMSTD are handled by videodev.c
-		 */
-	int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
-	int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
-
-		/* Input handling */
-	int (*vidioc_enum_input)(struct file *file, void *fh,
-				 struct v4l2_input *inp);
-	int (*vidioc_g_input)   (struct file *file, void *fh, unsigned int *i);
-	int (*vidioc_s_input)   (struct file *file, void *fh, unsigned int i);
-
-		/* Output handling */
-	int (*vidioc_enumoutput) (struct file *file, void *fh,
-				  struct v4l2_output *a);
-	int (*vidioc_g_output)   (struct file *file, void *fh, unsigned int *i);
-	int (*vidioc_s_output)   (struct file *file, void *fh, unsigned int i);
-
-		/* Control handling */
-	int (*vidioc_queryctrl)        (struct file *file, void *fh,
-					struct v4l2_queryctrl *a);
-	int (*vidioc_g_ctrl)           (struct file *file, void *fh,
-					struct v4l2_control *a);
-	int (*vidioc_s_ctrl)           (struct file *file, void *fh,
-					struct v4l2_control *a);
-	int (*vidioc_g_ext_ctrls)      (struct file *file, void *fh,
-					struct v4l2_ext_controls *a);
-	int (*vidioc_s_ext_ctrls)      (struct file *file, void *fh,
-					struct v4l2_ext_controls *a);
-	int (*vidioc_try_ext_ctrls)    (struct file *file, void *fh,
-					struct v4l2_ext_controls *a);
-	int (*vidioc_querymenu)        (struct file *file, void *fh,
-					struct v4l2_querymenu *a);
-
-	/* Audio ioctls */
-	int (*vidioc_enumaudio)        (struct file *file, void *fh,
-					struct v4l2_audio *a);
-	int (*vidioc_g_audio)          (struct file *file, void *fh,
-					struct v4l2_audio *a);
-	int (*vidioc_s_audio)          (struct file *file, void *fh,
-					struct v4l2_audio *a);
-
-	/* Audio out ioctls */
-	int (*vidioc_enumaudout)       (struct file *file, void *fh,
-					struct v4l2_audioout *a);
-	int (*vidioc_g_audout)         (struct file *file, void *fh,
-					struct v4l2_audioout *a);
-	int (*vidioc_s_audout)         (struct file *file, void *fh,
-					struct v4l2_audioout *a);
-	int (*vidioc_g_modulator)      (struct file *file, void *fh,
-					struct v4l2_modulator *a);
-	int (*vidioc_s_modulator)      (struct file *file, void *fh,
-					struct v4l2_modulator *a);
-	/* Crop ioctls */
-	int (*vidioc_cropcap)          (struct file *file, void *fh,
-					struct v4l2_cropcap *a);
-	int (*vidioc_g_crop)           (struct file *file, void *fh,
-					struct v4l2_crop *a);
-	int (*vidioc_s_crop)           (struct file *file, void *fh,
-					struct v4l2_crop *a);
-	/* Compression ioctls */
-	int (*vidioc_g_jpegcomp)       (struct file *file, void *fh,
-					struct v4l2_jpegcompression *a);
-	int (*vidioc_s_jpegcomp)       (struct file *file, void *fh,
-					struct v4l2_jpegcompression *a);
-	int (*vidioc_g_enc_index)      (struct file *file, void *fh,
-					struct v4l2_enc_idx *a);
-	int (*vidioc_encoder_cmd)      (struct file *file, void *fh,
-					struct v4l2_encoder_cmd *a);
-	int (*vidioc_try_encoder_cmd)  (struct file *file, void *fh,
-					struct v4l2_encoder_cmd *a);
-
-	/* Stream type-dependent parameter ioctls */
-	int (*vidioc_g_parm)           (struct file *file, void *fh,
-					struct v4l2_streamparm *a);
-	int (*vidioc_s_parm)           (struct file *file, void *fh,
-					struct v4l2_streamparm *a);
-
-	/* Tuner ioctls */
-	int (*vidioc_g_tuner)          (struct file *file, void *fh,
-					struct v4l2_tuner *a);
-	int (*vidioc_s_tuner)          (struct file *file, void *fh,
-					struct v4l2_tuner *a);
-	int (*vidioc_g_frequency)      (struct file *file, void *fh,
-					struct v4l2_frequency *a);
-	int (*vidioc_s_frequency)      (struct file *file, void *fh,
-					struct v4l2_frequency *a);
-
-	/* Sliced VBI cap */
-	int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh,
-					struct v4l2_sliced_vbi_cap *a);
-
-	/* Log status ioctl */
-	int (*vidioc_log_status)       (struct file *file, void *fh);
-
-
-	/* Debugging ioctls */
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	int (*vidioc_g_register)       (struct file *file, void *fh,
-					struct v4l2_register *reg);
-	int (*vidioc_s_register)       (struct file *file, void *fh,
-					struct v4l2_register *reg);
-#endif
-	int (*vidioc_g_chip_ident)     (struct file *file, void *fh,
-					struct v4l2_chip_ident *chip);
-
-	/* For other private ioctls */
-	int (*vidioc_default)	       (struct file *file, void *fh,
-					int cmd, void *arg);
-
-
-#ifdef OBSOLETE_OWNER /* to be removed soon */
-/* obsolete -- fops->owner is used instead */
-struct module *owner;
-/* dev->driver_data will be used instead some day.
-	* Use the video_{get|set}_drvdata() helper functions,
-	* so the switch over will be transparent for you.
-	* Or use {pci|usb}_{get|set}_drvdata() directly. */
-void *priv;
+#ifdef OBSOLETE_DEVDATA /* to be removed soon */
+	/* dev->driver_data will be used instead some day.
+	 * Use the video_{get|set}_drvdata() helper functions,
+	 * so the switch over will be transparent for you.
+	 * Or use {pci|usb}_{get|set}_drvdata() directly. */
+	void *priv;
 #endif
 
-	/* for videodev.c intenal usage -- please don't touch */
+	/* for videodev.c internal usage -- please don't touch */
 	int users;                     /* video_exclusive_{open|close} ... */
 	struct mutex lock;             /* ... helper function uses these   */
 };
 
 /* Class-dev to video-device */
-#define to_video_device(cd) container_of(cd, struct video_device, class_dev)
+#define to_video_device(cd) container_of(cd, struct video_device, dev)
 
 /* Version 2 functions */
 extern int video_register_device(struct video_device *vfd, int type, int nr);
+int video_register_device_index(struct video_device *vfd, int type, int nr,
+					int index);
 void video_unregister_device(struct video_device *);
-extern int video_ioctl2(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg);
 
 /* helper functions to alloc / release struct video_device, the
    later can be used for video_device->release() */
 struct video_device *video_device_alloc(void);
 void video_device_release(struct video_device *vfd);
 
-/* Include support for obsoleted stuff */
-extern int video_usercopy(struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg,
-			  int (*func)(struct inode *inode, struct file *file,
-				      unsigned int cmd, void *arg));
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#include <linux/mm.h>
-
-static inline int __must_check
-video_device_create_file(struct video_device *vfd,
-			 struct device_attribute *attr)
-{
-	int ret = device_create_file(&vfd->class_dev, attr);
-	if (ret < 0)
-		printk(KERN_WARNING "%s error: %d\n", __FUNCTION__, ret);
-	return ret;
-}
-static inline void
-video_device_remove_file(struct video_device *vfd,
-			 struct device_attribute *attr)
-{
-	device_remove_file(&vfd->class_dev, attr);
-}
-
-#endif /* CONFIG_VIDEO_V4L1_COMPAT */
-
-#ifdef OBSOLETE_OWNER /* to be removed soon */
+#ifdef OBSOLETE_DEVDATA /* to be removed soon */
 /* helper functions to access driver private data. */
 static inline void *video_get_drvdata(struct video_device *dev)
 {
@@ -390,9 +109,6 @@ static inline void video_set_drvdata(struct video_device *dev, void *data)
 	dev->priv = data;
 }
 
-#endif
-
-#ifdef OBSOLETE_DEVDATA /* to be removed soon */
 /* Obsolete stuff - Still needed for radio devices and obsolete drivers */
 extern struct video_device* video_devdata(struct file*);
 extern int video_exclusive_open(struct inode *inode, struct file *file);
diff --git a/include/media/v4l2-i2c-drv-legacy.h b/include/media/v4l2-i2c-drv-legacy.h
index 878562278b67..975ffbf4e2c5 100644
--- a/include/media/v4l2-i2c-drv-legacy.h
+++ b/include/media/v4l2-i2c-drv-legacy.h
@@ -68,7 +68,6 @@ static int v4l2_i2c_drv_detach_legacy(struct i2c_client *client)
 	if (err)
 		return err;
 	kfree(client);
-
 	return 0;
 }
 
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
new file mode 100644
index 000000000000..dc6404618555
--- /dev/null
+++ b/include/media/v4l2-ioctl.h
@@ -0,0 +1,301 @@
+/*
+ *
+ *	V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ * Moved from videodev2.h
+ *
+ *	Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#ifndef _V4L2_IOCTL_H
+#define _V4L2_IOCTL_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/compiler.h> /* need __user */
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+#include <linux/videodev.h>
+#else
+#include <linux/videodev2.h>
+#endif
+
+struct v4l2_ioctl_ops {
+	/* ioctl callbacks */
+
+	/* VIDIOC_QUERYCAP handler */
+	int (*vidioc_querycap)(struct file *file, void *fh, struct v4l2_capability *cap);
+
+	/* Priority handling */
+	int (*vidioc_g_priority)   (struct file *file, void *fh,
+				    enum v4l2_priority *p);
+	int (*vidioc_s_priority)   (struct file *file, void *fh,
+				    enum v4l2_priority p);
+
+	/* VIDIOC_ENUM_FMT handlers */
+	int (*vidioc_enum_fmt_vid_cap)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_overlay) (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_out)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+#if 1
+	/* deprecated, will be removed in 2.6.28 */
+	int (*vidioc_enum_fmt_vbi_cap)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+#endif
+	int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+
+	/* VIDIOC_G_FMT handlers */
+	int (*vidioc_g_fmt_vid_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_type_private)(struct file *file, void *fh,
+					struct v4l2_format *f);
+
+	/* VIDIOC_S_FMT handlers */
+	int (*vidioc_s_fmt_vid_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_type_private)(struct file *file, void *fh,
+					struct v4l2_format *f);
+
+	/* VIDIOC_TRY_FMT handlers */
+	int (*vidioc_try_fmt_vid_cap)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_overlay)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out_overlay)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_cap)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_out)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_type_private)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+
+	/* Buffer handlers */
+	int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
+	int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b);
+	int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
+	int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
+
+
+	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+			/* buffer type is struct vidio_mbuf * */
+	int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
+#endif
+	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
+				struct v4l2_framebuffer *a);
+	int (*vidioc_s_fbuf)   (struct file *file, void *fh,
+				struct v4l2_framebuffer *a);
+
+		/* Stream on/off */
+	int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i);
+	int (*vidioc_streamoff)(struct file *file, void *fh, enum v4l2_buf_type i);
+
+		/* Standard handling
+			ENUMSTD is handled by videodev.c
+		 */
+	int (*vidioc_g_std) (struct file *file, void *fh, v4l2_std_id *norm);
+	int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
+	int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
+
+		/* Input handling */
+	int (*vidioc_enum_input)(struct file *file, void *fh,
+				 struct v4l2_input *inp);
+	int (*vidioc_g_input)   (struct file *file, void *fh, unsigned int *i);
+	int (*vidioc_s_input)   (struct file *file, void *fh, unsigned int i);
+
+		/* Output handling */
+	int (*vidioc_enum_output) (struct file *file, void *fh,
+				  struct v4l2_output *a);
+	int (*vidioc_g_output)   (struct file *file, void *fh, unsigned int *i);
+	int (*vidioc_s_output)   (struct file *file, void *fh, unsigned int i);
+
+		/* Control handling */
+	int (*vidioc_queryctrl)        (struct file *file, void *fh,
+					struct v4l2_queryctrl *a);
+	int (*vidioc_g_ctrl)           (struct file *file, void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_s_ctrl)           (struct file *file, void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_g_ext_ctrls)      (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_s_ext_ctrls)      (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_try_ext_ctrls)    (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_querymenu)        (struct file *file, void *fh,
+					struct v4l2_querymenu *a);
+
+	/* Audio ioctls */
+	int (*vidioc_enumaudio)        (struct file *file, void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_g_audio)          (struct file *file, void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_s_audio)          (struct file *file, void *fh,
+					struct v4l2_audio *a);
+
+	/* Audio out ioctls */
+	int (*vidioc_enumaudout)       (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_g_audout)         (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_s_audout)         (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_g_modulator)      (struct file *file, void *fh,
+					struct v4l2_modulator *a);
+	int (*vidioc_s_modulator)      (struct file *file, void *fh,
+					struct v4l2_modulator *a);
+	/* Crop ioctls */
+	int (*vidioc_cropcap)          (struct file *file, void *fh,
+					struct v4l2_cropcap *a);
+	int (*vidioc_g_crop)           (struct file *file, void *fh,
+					struct v4l2_crop *a);
+	int (*vidioc_s_crop)           (struct file *file, void *fh,
+					struct v4l2_crop *a);
+	/* Compression ioctls */
+	int (*vidioc_g_jpegcomp)       (struct file *file, void *fh,
+					struct v4l2_jpegcompression *a);
+	int (*vidioc_s_jpegcomp)       (struct file *file, void *fh,
+					struct v4l2_jpegcompression *a);
+	int (*vidioc_g_enc_index)      (struct file *file, void *fh,
+					struct v4l2_enc_idx *a);
+	int (*vidioc_encoder_cmd)      (struct file *file, void *fh,
+					struct v4l2_encoder_cmd *a);
+	int (*vidioc_try_encoder_cmd)  (struct file *file, void *fh,
+					struct v4l2_encoder_cmd *a);
+
+	/* Stream type-dependent parameter ioctls */
+	int (*vidioc_g_parm)           (struct file *file, void *fh,
+					struct v4l2_streamparm *a);
+	int (*vidioc_s_parm)           (struct file *file, void *fh,
+					struct v4l2_streamparm *a);
+
+	/* Tuner ioctls */
+	int (*vidioc_g_tuner)          (struct file *file, void *fh,
+					struct v4l2_tuner *a);
+	int (*vidioc_s_tuner)          (struct file *file, void *fh,
+					struct v4l2_tuner *a);
+	int (*vidioc_g_frequency)      (struct file *file, void *fh,
+					struct v4l2_frequency *a);
+	int (*vidioc_s_frequency)      (struct file *file, void *fh,
+					struct v4l2_frequency *a);
+
+	/* Sliced VBI cap */
+	int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh,
+					struct v4l2_sliced_vbi_cap *a);
+
+	/* Log status ioctl */
+	int (*vidioc_log_status)       (struct file *file, void *fh);
+
+	int (*vidioc_s_hw_freq_seek)   (struct file *file, void *fh,
+					struct v4l2_hw_freq_seek *a);
+
+	/* Debugging ioctls */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	int (*vidioc_g_register)       (struct file *file, void *fh,
+					struct v4l2_register *reg);
+	int (*vidioc_s_register)       (struct file *file, void *fh,
+					struct v4l2_register *reg);
+#endif
+	int (*vidioc_g_chip_ident)     (struct file *file, void *fh,
+					struct v4l2_chip_ident *chip);
+
+	/* For other private ioctls */
+	int (*vidioc_default)	       (struct file *file, void *fh,
+					int cmd, void *arg);
+};
+
+
+/* v4l debugging and diagnostics */
+
+/* Debug bitmask flags to be used on V4L2 */
+#define V4L2_DEBUG_IOCTL     0x01
+#define V4L2_DEBUG_IOCTL_ARG 0x02
+
+/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
+#define v4l_print_ioctl(name, cmd)  		 \
+	do {  					 \
+		printk(KERN_DEBUG "%s: ", name); \
+		v4l_printk_ioctl(cmd);		 \
+	} while (0)
+
+/* Use this macro in I2C drivers where 'client' is the struct i2c_client
+   pointer */
+#define v4l_i2c_print_ioctl(client, cmd) 		   \
+	do {      					   \
+		v4l_client_printk(KERN_DEBUG, client, ""); \
+		v4l_printk_ioctl(cmd);			   \
+	} while (0)
+
+/*  Video standard functions  */
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
+extern int v4l2_video_std_construct(struct v4l2_standard *vs,
+				    int id, const char *name);
+/* Prints the ioctl in a human-readable format */
+extern void v4l_printk_ioctl(unsigned int cmd);
+
+/* names for fancy debug output */
+extern const char *v4l2_field_names[];
+extern const char *v4l2_type_names[];
+
+/*  Compatibility layer interface  --  v4l1-compat module */
+typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
+			   unsigned int cmd, void *arg);
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
+			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode, file, cmd, arg, ioctl) (-EINVAL)
+#endif
+
+/* 32 Bits compatibility layer for 64 bits processors */
+extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
+				unsigned long arg);
+
+extern int video_ioctl2(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg);
+
+/* Include support for obsoleted stuff */
+extern int video_usercopy(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg,
+			  int (*func)(struct inode *inode, struct file *file,
+				      unsigned int cmd, void *arg));
+
+#endif /* _V4L2_IOCTL_H */
diff --git a/include/media/videobuf-dma-contig.h b/include/media/videobuf-dma-contig.h
new file mode 100644
index 000000000000..549386681aab
--- /dev/null
+++ b/include/media/videobuf-dma-contig.h
@@ -0,0 +1,32 @@
+/*
+ * helper functions for physically contiguous capture buffers
+ *
+ * The functions support hardware lacking scatter gather support
+ * (i.e. the buffers must be linear in physical memory)
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+#ifndef _VIDEOBUF_DMA_CONTIG_H
+#define _VIDEOBUF_DMA_CONTIG_H
+
+#include <linux/dma-mapping.h>
+#include <media/videobuf-core.h>
+
+void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
+				    struct videobuf_queue_ops *ops,
+				    struct device *dev,
+				    spinlock_t *irqlock,
+				    enum v4l2_buf_type type,
+				    enum v4l2_field field,
+				    unsigned int msize,
+				    void *priv);
+
+dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
+void videobuf_dma_contig_free(struct videobuf_queue *q,
+			      struct videobuf_buffer *buf);
+
+#endif /* _VIDEOBUF_DMA_CONTIG_H */
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index be8da269ee33..90edd22d343c 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -1,7 +1,7 @@
 /*
  * helper functions for SG DMA video4linux capture buffers
  *
- * The functions expect the hardware being able to scatter gatter
+ * The functions expect the hardware being able to scatter gather
  * (i.e. the buffers are not linear in physical memory, but fragmented
  * into PAGE_SIZE chunks).  They also assume the driver does not need
  * to touch the video data.
diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h
index aed39460c154..e87222c6a125 100644
--- a/include/media/videobuf-vmalloc.h
+++ b/include/media/videobuf-vmalloc.h
@@ -1,7 +1,7 @@
 /*
  * helper functions for vmalloc capture buffers
  *
- * The functions expect the hardware being able to scatter gatter
+ * The functions expect the hardware being able to scatter gather
  * (i.e. the buffers are not linear in physical memory, but fragmented
  * into PAGE_SIZE chunks).  They also assume the driver does not need
  * to touch the video data.
diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h
index 9b1e2526b45e..e17eda302b2d 100644
--- a/include/mtd/inftl-user.h
+++ b/include/mtd/inftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of INFTL headers shared with userspace
  *
  */
diff --git a/include/mtd/jffs2-user.h b/include/mtd/jffs2-user.h
index d508ef0ae091..001685d7fa88 100644
--- a/include/mtd/jffs2-user.h
+++ b/include/mtd/jffs2-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $
- *
  * JFFS2 definitions for use in user space only
  */
 
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 615072c4da04..c6c61cd5a254 100644
--- a/include/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $
- *
  * Portions of MTD ABI definition which are shared by kernel and user space
  */
 
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
index 713f34d3e62e..170ceca3b2d0 100644
--- a/include/mtd/mtd-user.h
+++ b/include/mtd/mtd-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd-user.h,v 1.2 2004/05/05 14:44:57 dwmw2 Exp $
- *
  * MTD ABI header for use by user space only.
  */
 
diff --git a/include/mtd/nftl-user.h b/include/mtd/nftl-user.h
index b2bca18e7311..390d21c080aa 100644
--- a/include/mtd/nftl-user.h
+++ b/include/mtd/nftl-user.h
@@ -1,6 +1,4 @@
 /*
- * $Id: nftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
  * Parts of NFTL headers shared with userspace
  *
  */
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index a7421f130cc0..ccdc562e444e 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -58,6 +58,13 @@
  * device should be used. A &struct ubi_rsvol_req object has to be properly
  * filled and a pointer to it has to be passed to the IOCTL.
  *
+ * UBI volumes re-name
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+ * of the UBI character device should be used. A &struct ubi_rnvol_req object
+ * has to be properly filled and a pointer to it has to be passed to the IOCTL.
+ *
  * UBI volume update
  * ~~~~~~~~~~~~~~~~~
  *
@@ -104,6 +111,8 @@
 #define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t)
 /* Re-size an UBI volume */
 #define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+/* Re-name volumes */
+#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
 
 /* IOCTL commands of the UBI control character device */
 
@@ -128,6 +137,9 @@
 /* Maximum MTD device name length supported by UBI */
 #define MAX_UBI_MTD_NAME_LEN 127
 
+/* Maximum amount of UBI volumes that can be re-named at one go */
+#define UBI_MAX_RNVOL 32
+
 /*
  * UBI data type hint constants.
  *
@@ -176,20 +188,20 @@ enum {
  * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
  *
  * But in rare cases, if this optimizes things, the VID header may be placed to
- * a different offset. For example, the boot-loader might do things faster if the
- * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As
- * the boot-loader would not normally need to read EC headers (unless it needs
- * UBI in RW mode), it might be faster to calculate ECC. This is weird example,
- * but it real-life example. So, in this example, @vid_hdr_offer would be
- * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
- * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page
- * of the first page and add needed padding.
+ * a different offset. For example, the boot-loader might do things faster if
+ * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
+ * As the boot-loader would not normally need to read EC headers (unless it
+ * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
+ * example, but it real-life example. So, in this example, @vid_hdr_offer would
+ * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th
+ * sub-page of the first page and add needed padding.
  */
 struct ubi_attach_req {
 	int32_t ubi_num;
 	int32_t mtd_num;
 	int32_t vid_hdr_offset;
-	uint8_t padding[12];
+	int8_t padding[12];
 };
 
 /**
@@ -251,6 +263,48 @@ struct ubi_rsvol_req {
 } __attribute__ ((packed));
 
 /**
+ * struct ubi_rnvol_req - volumes re-name request.
+ * @count: count of volumes to re-name
+ * @padding1:  reserved for future, not used, has to be zeroed
+ * @vol_id: ID of the volume to re-name
+ * @name_len: name length
+ * @padding2:  reserved for future, not used, has to be zeroed
+ * @name: new volume name
+ *
+ * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
+ * re-name is specified in the @count field. The ID of the volumes to re-name
+ * and the new names are specified in the @vol_id and @name fields.
+ *
+ * The UBI volume re-name operation is atomic, which means that should power cut
+ * happen, the volumes will have either old name or new name. So the possible
+ * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
+ * A and B one may create temporary volumes %A1 and %B1 with the new contents,
+ * then atomically re-name A1->A and B1->B, in which case old %A and %B will
+ * be removed.
+ *
+ * If it is not desirable to remove old A and B, the re-name request has to
+ * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
+ * become A and B, and old A and B will become A1 and B1.
+ *
+ * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
+ * and B1 become A and B, and old A and B become X and Y.
+ *
+ * In other words, in case of re-naming into an existing volume name, the
+ * existing volume is removed, unless it is re-named as well at the same
+ * re-name request.
+ */
+struct ubi_rnvol_req {
+	int32_t count;
+	int8_t padding1[12];
+	struct {
+		int32_t vol_id;
+		int16_t name_len;
+		int8_t  padding2[2];
+		char    name[UBI_MAX_VOLUME_NAME + 1];
+	} ents[UBI_MAX_RNVOL];
+} __attribute__ ((packed));
+
+/**
  * struct ubi_leb_change_req - a data structure used in atomic logical
  *                             eraseblock change requests.
  * @lnum: logical eraseblock number to change
@@ -261,8 +315,8 @@ struct ubi_rsvol_req {
 struct ubi_leb_change_req {
 	int32_t lnum;
 	int32_t bytes;
-	uint8_t dtype;
-	uint8_t padding[7];
+	int8_t  dtype;
+	int8_t  padding[7];
 } __attribute__ ((packed));
 
 #endif /* __UBI_USER_H__ */
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index bbd3d583c6e6..06b28142b3ab 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -121,7 +121,8 @@ static inline int addrconf_finite_timeout(unsigned long timeout)
  */
 extern int			ipv6_addr_label_init(void);
 extern void			ipv6_addr_label_rtnl_register(void);
-extern u32			ipv6_addr_label(const struct in6_addr *addr,
+extern u32			ipv6_addr_label(struct net *net,
+						const struct in6_addr *addr,
 						int type, int ifindex);
 
 /*
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 2dfa96b0575e..7dd29b7e461d 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -51,7 +51,7 @@ struct unix_sock {
         struct sock		*peer;
         struct sock		*other;
 	struct list_head	link;
-        atomic_t                inflight;
+        atomic_long_t           inflight;
         spinlock_t		lock;
 	unsigned int		gc_candidate : 1;
         wait_queue_head_t       peer_wait;
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 750648df13f4..6f8418bf4241 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -121,6 +121,7 @@ void bt_sock_link(struct bt_sock_list *l, struct sock *s);
 void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
 int  bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg, size_t len, int flags);
 uint bt_sock_poll(struct file * file, struct socket *sock, poll_table *wait);
+int  bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
 int  bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
 
 void bt_accept_enqueue(struct sock *parent, struct sock *sk);
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index a8a9eb6af966..3cc294919312 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -72,8 +72,6 @@ enum {
 	HCI_INQUIRY,
 
 	HCI_RAW,
-
-	HCI_SECMGR
 };
 
 /* HCI ioctl defines */
@@ -86,6 +84,7 @@ enum {
 #define HCIGETDEVINFO	_IOR('H', 211, int)
 #define HCIGETCONNLIST	_IOR('H', 212, int)
 #define HCIGETCONNINFO	_IOR('H', 213, int)
+#define HCIGETAUTHINFO	_IOR('H', 215, int)
 
 #define HCISETRAW	_IOW('H', 220, int)
 #define HCISETSCAN	_IOW('H', 221, int)
@@ -97,8 +96,6 @@ enum {
 #define HCISETACLMTU	_IOW('H', 227, int)
 #define HCISETSCOMTU	_IOW('H', 228, int)
 
-#define HCISETSECMGR	_IOW('H', 230, int)
-
 #define HCIINQUIRY	_IOR('H', 240, int)
 
 /* HCI timeouts */
@@ -137,6 +134,8 @@ enum {
 #define ESCO_EV4	0x0010
 #define ESCO_EV5	0x0020
 
+#define SCO_ESCO_MASK  (ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+
 /* ACL flags */
 #define ACL_CONT		0x01
 #define ACL_START		0x02
@@ -178,6 +177,8 @@ enum {
 
 #define LMP_SNIFF_SUBR	0x02
 
+#define LMP_SIMPLE_PAIR	0x08
+
 /* Connection modes */
 #define HCI_CM_ACTIVE	0x0000
 #define HCI_CM_HOLD	0x0001
@@ -199,6 +200,14 @@ enum {
 #define HCI_LM_RELIABLE	0x0010
 #define HCI_LM_SECURE	0x0020
 
+/* Authentication types */
+#define HCI_AT_NO_BONDING		0x00
+#define HCI_AT_NO_BONDING_MITM		0x01
+#define HCI_AT_DEDICATED_BONDING	0x02
+#define HCI_AT_DEDICATED_BONDING_MITM	0x03
+#define HCI_AT_GENERAL_BONDING		0x04
+#define HCI_AT_GENERAL_BONDING_MITM	0x05
+
 /* -----  HCI Commands ---- */
 #define HCI_OP_INQUIRY			0x0401
 struct hci_cp_inquiry {
@@ -402,6 +411,17 @@ struct hci_rp_write_link_policy {
 	__le16   handle;
 } __attribute__ ((packed));
 
+#define HCI_OP_READ_DEF_LINK_POLICY	0x080e
+struct hci_rp_read_def_link_policy {
+	__u8     status;
+	__le16   policy;
+} __attribute__ ((packed));
+
+#define HCI_OP_WRITE_DEF_LINK_POLICY	0x080f
+struct hci_cp_write_def_link_policy {
+	__le16   policy;
+} __attribute__ ((packed));
+
 #define HCI_OP_SNIFF_SUBRATE		0x0811
 struct hci_cp_sniff_subrate {
 	__le16   handle;
@@ -501,6 +521,17 @@ struct hci_cp_host_buffer_size {
 	__le16   sco_max_pkt;
 } __attribute__ ((packed));
 
+#define HCI_OP_READ_SSP_MODE		0x0c55
+struct hci_rp_read_ssp_mode {
+	__u8     status;
+	__u8     mode;
+} __attribute__ ((packed));
+
+#define HCI_OP_WRITE_SSP_MODE		0x0c56
+struct hci_cp_write_ssp_mode {
+	__u8     mode;
+} __attribute__ ((packed));
+
 #define HCI_OP_READ_LOCAL_VERSION	0x1001
 struct hci_rp_read_local_version {
 	__u8     status;
@@ -696,6 +727,13 @@ struct hci_ev_clock_offset {
 	__le16   clock_offset;
 } __attribute__ ((packed));
 
+#define HCI_EV_PKT_TYPE_CHANGE		0x1d
+struct hci_ev_pkt_type_change {
+	__u8     status;
+	__le16   handle;
+	__le16   pkt_type;
+} __attribute__ ((packed));
+
 #define HCI_EV_PSCAN_REP_MODE		0x20
 struct hci_ev_pscan_rep_mode {
 	bdaddr_t bdaddr;
@@ -774,6 +812,23 @@ struct extended_inquiry_info {
 	__u8     data[240];
 } __attribute__ ((packed));
 
+#define HCI_EV_IO_CAPA_REQUEST		0x31
+struct hci_ev_io_capa_request {
+	bdaddr_t bdaddr;
+} __attribute__ ((packed));
+
+#define HCI_EV_SIMPLE_PAIR_COMPLETE	0x36
+struct hci_ev_simple_pair_complete {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __attribute__ ((packed));
+
+#define HCI_EV_REMOTE_HOST_FEATURES	0x3d
+struct hci_ev_remote_host_features {
+	bdaddr_t bdaddr;
+	__u8     features[8];
+} __attribute__ ((packed));
+
 /* Internal events generated by Bluetooth stack */
 #define HCI_EV_STACK_INTERNAL	0xfd
 struct hci_ev_stack_internal {
@@ -951,6 +1006,11 @@ struct hci_conn_info_req {
 	struct   hci_conn_info conn_info[0];
 };
 
+struct hci_auth_info_req {
+	bdaddr_t bdaddr;
+	__u8     type;
+};
+
 struct hci_inquiry_req {
 	__u16 dev_id;
 	__u16 flags;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index ea13baa3851b..cbf751094688 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -40,6 +40,7 @@ struct inquiry_data {
 	__u8		dev_class[3];
 	__le16		clock_offset;
 	__s8		rssi;
+	__u8		ssp_mode;
 };
 
 struct inquiry_entry {
@@ -75,6 +76,7 @@ struct hci_dev {
 	__u8		dev_class[3];
 	__u8		features[8];
 	__u8		commands[64];
+	__u8		ssp_mode;
 	__u8		hci_ver;
 	__u16		hci_rev;
 	__u16		manufacturer;
@@ -161,9 +163,12 @@ struct hci_conn {
 	__u8		 attempt;
 	__u8		 dev_class[3];
 	__u8             features[8];
+	__u8             ssp_mode;
 	__u16            interval;
+	__u16            pkt_type;
 	__u16            link_policy;
 	__u32		 link_mode;
+	__u8             auth_type;
 	__u8             power_save;
 	unsigned long	 pend;
 
@@ -344,7 +349,7 @@ static inline void hci_conn_put(struct hci_conn *conn)
 			if (conn->state == BT_CONNECTED) {
 				timeo = msecs_to_jiffies(HCI_DISCONN_TIMEOUT);
 				if (!conn->out)
-					timeo *= 2;
+					timeo *= 5;
 			} else
 				timeo = msecs_to_jiffies(10);
 		} else
@@ -418,6 +423,7 @@ int hci_get_dev_list(void __user *arg);
 int hci_get_dev_info(void __user *arg);
 int hci_get_conn_list(void __user *arg);
 int hci_get_conn_info(struct hci_dev *hdev, void __user *arg);
+int hci_get_auth_info(struct hci_dev *hdev, void __user *arg);
 int hci_inquiry(void __user *arg);
 
 void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb);
@@ -459,6 +465,7 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 #define lmp_sniff_capable(dev)     ((dev)->features[0] & LMP_SNIFF)
 #define lmp_sniffsubr_capable(dev) ((dev)->features[5] & LMP_SNIFF_SUBR)
 #define lmp_esco_capable(dev)      ((dev)->features[3] & LMP_ESCO)
+#define lmp_ssp_capable(dev)       ((dev)->features[6] & LMP_SIMPLE_PAIR)
 
 /* ----- HCI protocols ----- */
 struct hci_proto {
@@ -474,7 +481,7 @@ struct hci_proto {
 	int (*recv_acldata)	(struct hci_conn *conn, struct sk_buff *skb, __u16 flags);
 	int (*recv_scodata)	(struct hci_conn *conn, struct sk_buff *skb);
 	int (*auth_cfm)		(struct hci_conn *conn, __u8 status);
-	int (*encrypt_cfm)	(struct hci_conn *conn, __u8 status);
+	int (*encrypt_cfm)	(struct hci_conn *conn, __u8 status, __u8 encrypt);
 };
 
 static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type)
@@ -532,17 +539,17 @@ static inline void hci_proto_auth_cfm(struct hci_conn *conn, __u8 status)
 		hp->auth_cfm(conn, status);
 }
 
-static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status)
+static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status, __u8 encrypt)
 {
 	register struct hci_proto *hp;
 
 	hp = hci_proto[HCI_PROTO_L2CAP];
 	if (hp && hp->encrypt_cfm)
-		hp->encrypt_cfm(conn, status);
+		hp->encrypt_cfm(conn, status, encrypt);
 
 	hp = hci_proto[HCI_PROTO_SCO];
 	if (hp && hp->encrypt_cfm)
-		hp->encrypt_cfm(conn, status);
+		hp->encrypt_cfm(conn, status, encrypt);
 }
 
 int hci_register_proto(struct hci_proto *hproto);
@@ -579,7 +586,7 @@ static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status, __u8 encr
 {
 	struct list_head *p;
 
-	hci_proto_encrypt_cfm(conn, status);
+	hci_proto_encrypt_cfm(conn, status, encrypt);
 
 	read_lock_bh(&hci_cb_list_lock);
 	list_for_each(p, &hci_cb_list) {
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index 98ec7a320689..4dc8d92a4638 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -180,7 +180,9 @@ struct rfcomm_dlc {
 	u8            addr;
 	u8            priority;
 	u8            v24_sig;
+	u8            remote_v24_sig;
 	u8            mscex;
+	u8            out;
 
 	u32           link_mode;
 
diff --git a/include/net/compat.h b/include/net/compat.h
index 164cb682e220..5bbf8bf9efea 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -32,7 +32,7 @@ extern int compat_sock_get_timestampns(struct sock *, struct timespec __user *);
 #endif /* defined(CONFIG_COMPAT) */
 
 extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
-extern int verify_compat_iovec(struct msghdr *, struct iovec *, char *, int);
+extern int verify_compat_iovec(struct msghdr *, struct iovec *, struct sockaddr *, int);
 extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
 extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
 extern asmlinkage long compat_sys_getsockopt(int, int, int, char __user *, int __user *);
diff --git a/include/net/dst.h b/include/net/dst.h
index 002500e631f5..8a8b71e5f3f1 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -128,6 +128,18 @@ static inline u32 dst_mtu(const struct dst_entry *dst)
 	return mtu;
 }
 
+/* RTT metrics are stored in milliseconds for user ABI, but used as jiffies */
+static inline unsigned long dst_metric_rtt(const struct dst_entry *dst, int metric)
+{
+	return msecs_to_jiffies(dst_metric(dst, metric));
+}
+
+static inline void set_dst_metric_rtt(struct dst_entry *dst, int metric,
+				      unsigned long rtt)
+{
+	dst->metrics[metric-1] = jiffies_to_msecs(rtt);
+}
+
 static inline u32
 dst_allfrag(const struct dst_entry *dst)
 {
@@ -240,17 +252,7 @@ static inline int dst_output(struct sk_buff *skb)
 /* Input packet from network to transport.  */
 static inline int dst_input(struct sk_buff *skb)
 {
-	int err;
-
-	for (;;) {
-		err = skb->dst->input(skb);
-
-		if (likely(err == 0))
-			return err;
-		/* Oh, Jamal... Seems, I will not forgive you this mess. :-) */
-		if (unlikely(err != NET_XMIT_BYPASS))
-			return err;
-	}
+	return skb->dst->input(skb);
 }
 
 static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie)
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index a5c6ccc5bb19..c2bb5cae6515 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -62,7 +62,7 @@ struct fib_rules_ops
 
 	/* Called after modifications to the rules set, must flush
 	 * the route cache if one exists. */
-	void			(*flush_cache)(void);
+	void			(*flush_cache)(struct fib_rules_ops *ops);
 
 	int			nlgroup;
 	const struct nla_policy	*policy;
diff --git a/include/net/flow.h b/include/net/flow.h
index ad16e0076c89..228b2477ceec 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -47,7 +47,6 @@ struct flowi {
 #define fl4_scope	nl_u.ip4_u.scope
 
 	__u8	proto;
-	__u8	flags;
 	union {
 		struct {
 			__be16	sport;
diff --git a/include/net/garp.h b/include/net/garp.h
new file mode 100644
index 000000000000..825f172caba9
--- /dev/null
+++ b/include/net/garp.h
@@ -0,0 +1,128 @@
+#ifndef _NET_GARP_H
+#define _NET_GARP_H
+
+#include <net/stp.h>
+
+#define GARP_PROTOCOL_ID	0x1
+#define GARP_END_MARK		0x0
+
+struct garp_pdu_hdr {
+	__be16	protocol;
+};
+
+struct garp_msg_hdr {
+	u8	attrtype;
+};
+
+enum garp_attr_event {
+	GARP_LEAVE_ALL,
+	GARP_JOIN_EMPTY,
+	GARP_JOIN_IN,
+	GARP_LEAVE_EMPTY,
+	GARP_LEAVE_IN,
+	GARP_EMPTY,
+};
+
+struct garp_attr_hdr {
+	u8	len;
+	u8	event;
+	u8	data[];
+};
+
+struct garp_skb_cb {
+	u8	cur_type;
+};
+
+static inline struct garp_skb_cb *garp_cb(struct sk_buff *skb)
+{
+	BUILD_BUG_ON(sizeof(struct garp_skb_cb) >
+		     FIELD_SIZEOF(struct sk_buff, cb));
+	return (struct garp_skb_cb *)skb->cb;
+}
+
+enum garp_applicant_state {
+	GARP_APPLICANT_INVALID,
+	GARP_APPLICANT_VA,
+	GARP_APPLICANT_AA,
+	GARP_APPLICANT_QA,
+	GARP_APPLICANT_LA,
+	GARP_APPLICANT_VP,
+	GARP_APPLICANT_AP,
+	GARP_APPLICANT_QP,
+	GARP_APPLICANT_VO,
+	GARP_APPLICANT_AO,
+	GARP_APPLICANT_QO,
+	__GARP_APPLICANT_MAX
+};
+#define GARP_APPLICANT_MAX	(__GARP_APPLICANT_MAX - 1)
+
+enum garp_event {
+	GARP_EVENT_REQ_JOIN,
+	GARP_EVENT_REQ_LEAVE,
+	GARP_EVENT_R_JOIN_IN,
+	GARP_EVENT_R_JOIN_EMPTY,
+	GARP_EVENT_R_EMPTY,
+	GARP_EVENT_R_LEAVE_IN,
+	GARP_EVENT_R_LEAVE_EMPTY,
+	GARP_EVENT_TRANSMIT_PDU,
+	__GARP_EVENT_MAX
+};
+#define GARP_EVENT_MAX		(__GARP_EVENT_MAX - 1)
+
+enum garp_action {
+	GARP_ACTION_NONE,
+	GARP_ACTION_S_JOIN_IN,
+	GARP_ACTION_S_LEAVE_EMPTY,
+};
+
+struct garp_attr {
+	struct rb_node			node;
+	enum garp_applicant_state	state;
+	u8				type;
+	u8				dlen;
+	unsigned char			data[];
+};
+
+enum garp_applications {
+	GARP_APPLICATION_GVRP,
+	__GARP_APPLICATION_MAX
+};
+#define GARP_APPLICATION_MAX	(__GARP_APPLICATION_MAX - 1)
+
+struct garp_application {
+	enum garp_applications	type;
+	unsigned int		maxattr;
+	struct stp_proto	proto;
+};
+
+struct garp_applicant {
+	struct garp_application	*app;
+	struct net_device	*dev;
+	struct timer_list	join_timer;
+
+	spinlock_t		lock;
+	struct sk_buff_head	queue;
+	struct sk_buff		*pdu;
+	struct rb_root		gid;
+};
+
+struct garp_port {
+	struct garp_applicant	*applicants[GARP_APPLICATION_MAX + 1];
+};
+
+extern int	garp_register_application(struct garp_application *app);
+extern void	garp_unregister_application(struct garp_application *app);
+
+extern int	garp_init_applicant(struct net_device *dev,
+				    struct garp_application *app);
+extern void	garp_uninit_applicant(struct net_device *dev,
+				      struct garp_application *app);
+
+extern int	garp_request_join(const struct net_device *dev,
+				  const struct garp_application *app,
+				  const void *data, u8 len, u8 type);
+extern void	garp_request_leave(const struct net_device *dev,
+				   const struct garp_application *app,
+				   const void *data, u8 len, u8 type);
+
+#endif /* _NET_GARP_H */
diff --git a/include/net/icmp.h b/include/net/icmp.h
index dddb839ff4b5..dfa72d4e8907 100644
--- a/include/net/icmp.h
+++ b/include/net/icmp.h
@@ -29,27 +29,21 @@ struct icmp_err {
 };
 
 extern struct icmp_err icmp_err_convert[];
-DECLARE_SNMP_STAT(struct icmp_mib, icmp_statistics);
-DECLARE_SNMP_STAT(struct icmpmsg_mib, icmpmsg_statistics);
-#define ICMP_INC_STATS(field)		SNMP_INC_STATS(icmp_statistics, field)
-#define ICMP_INC_STATS_BH(field)	SNMP_INC_STATS_BH(icmp_statistics, field)
-#define ICMP_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(icmp_statistics, field)
-#define ICMPMSGOUT_INC_STATS(field)	SNMP_INC_STATS(icmpmsg_statistics, field+256)
-#define ICMPMSGOUT_INC_STATS_BH(field)	SNMP_INC_STATS_BH(icmpmsg_statistics, field+256)
-#define ICMPMSGOUT_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(icmpmsg_statistics, field+256)
-#define ICMPMSGIN_INC_STATS(field)	SNMP_INC_STATS(icmpmsg_statistics, field)
-#define ICMPMSGIN_INC_STATS_BH(field)	SNMP_INC_STATS_BH(icmpmsg_statistics, field)
-#define ICMPMSGIN_INC_STATS_USER(field) SNMP_INC_STATS_USER(icmpmsg_statistics, field)
+#define ICMP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.icmp_statistics, field)
+#define ICMP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.icmp_statistics, field)
+#define ICMPMSGOUT_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.icmpmsg_statistics, field+256)
+#define ICMPMSGIN_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.icmpmsg_statistics, field)
 
 struct dst_entry;
 struct net_proto_family;
 struct sk_buff;
+struct net;
 
 extern void	icmp_send(struct sk_buff *skb_in,  int type, int code, __be32 info);
 extern int	icmp_rcv(struct sk_buff *skb);
 extern int	icmp_ioctl(struct sock *sk, int cmd, unsigned long arg);
 extern int	icmp_init(void);
-extern void	icmp_out_count(unsigned char type);
+extern void	icmp_out_count(struct net *net, unsigned char type);
 
 /* Move into dst.h ? */
 extern int 	xrlim_allow(struct dst_entry *dst, int timeout);
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index 529816bfbc52..b31399e1fd83 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -1262,9 +1262,6 @@ extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
 /* ieee80211_tx.c */
 extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev);
 extern void ieee80211_txb_free(struct ieee80211_txb *);
-extern int ieee80211_tx_frame(struct ieee80211_device *ieee,
-			      struct ieee80211_hdr *frame, int hdr_len,
-			      int total_len, int encrypt_mpdu);
 
 /* ieee80211_rx.c */
 extern void ieee80211_rx_any(struct ieee80211_device *ieee,
@@ -1312,14 +1309,6 @@ extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee,
 extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee,
 				      struct iw_request_info *info,
 				      union iwreq_data *wrqu, char *extra);
-extern int ieee80211_wx_set_auth(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra);
-extern int ieee80211_wx_get_auth(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu,
-				 char *extra);
 
 static inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
 {
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index dfd8bf66ce27..d364fd594ea4 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -262,7 +262,7 @@ static inline int ieee80211_get_radiotap_len(unsigned char *data)
 	struct ieee80211_radiotap_header *hdr =
 		(struct ieee80211_radiotap_header *)data;
 
-	return le16_to_cpu(get_unaligned(&hdr->it_len));
+	return get_unaligned_le16(&hdr->it_len);
 }
 
 #endif				/* IEEE80211_RADIOTAP_H */
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index b2cfc4927257..c8effa4b1feb 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -148,7 +148,6 @@ struct ifacaddr6
 #define	IFA_HOST	IPV6_ADDR_LOOPBACK
 #define	IFA_LINK	IPV6_ADDR_LINKLOCAL
 #define	IFA_SITE	IPV6_ADDR_SITELOCAL
-#define	IFA_GLOBAL	0x0000U
 
 struct ipv6_devstat {
 	struct proc_dir_entry	*proc_dir_entry;
@@ -194,8 +193,6 @@ struct inet6_dev
 	struct rcu_head		rcu;
 };
 
-extern struct ipv6_devconf ipv6_devconf;
-
 static inline void ipv6_eth_mc_map(struct in6_addr *addr, char *buf)
 {
 	/*
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index 62a5b691858e..e48989f04c24 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h
@@ -24,18 +24,20 @@
 #include <net/inet_sock.h>
 
 #include <net/ipv6.h>
+#include <net/netns/hash.h>
 
 struct inet_hashinfo;
 
 /* I have no idea if this is a good hash for v6 or not. -DaveM */
-static inline unsigned int inet6_ehashfn(const struct in6_addr *laddr, const u16 lport,
+static inline unsigned int inet6_ehashfn(struct net *net,
+				const struct in6_addr *laddr, const u16 lport,
 				const struct in6_addr *faddr, const __be16 fport)
 {
 	u32 ports = (lport ^ (__force u16)fport);
 
 	return jhash_3words((__force u32)laddr->s6_addr32[3],
 			    (__force u32)faddr->s6_addr32[3],
-			    ports, inet_ehash_secret);
+			    ports, inet_ehash_secret + net_hash_mix(net));
 }
 
 static inline int inet6_sk_ehashfn(const struct sock *sk)
@@ -46,7 +48,9 @@ static inline int inet6_sk_ehashfn(const struct sock *sk)
 	const struct in6_addr *faddr = &np->daddr;
 	const __u16 lport = inet->num;
 	const __be16 fport = inet->dport;
-	return inet6_ehashfn(laddr, lport, faddr, fport);
+	struct net *net = sock_net(sk);
+
+	return inet6_ehashfn(net, laddr, lport, faddr, fport);
 }
 
 extern void __inet6_hash(struct sock *sk);
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index 735b926a3497..bb619d80f2e2 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -29,6 +29,7 @@
 #include <net/inet_sock.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
+#include <net/netns/hash.h>
 
 #include <asm/atomic.h>
 #include <asm/byteorder.h>
@@ -201,23 +202,24 @@ extern struct inet_bind_bucket *
 extern void inet_bind_bucket_destroy(struct kmem_cache *cachep,
 				     struct inet_bind_bucket *tb);
 
-static inline int inet_bhashfn(const __u16 lport, const int bhash_size)
+static inline int inet_bhashfn(struct net *net,
+		const __u16 lport, const int bhash_size)
 {
-	return lport & (bhash_size - 1);
+	return (lport + net_hash_mix(net)) & (bhash_size - 1);
 }
 
 extern void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
 			   const unsigned short snum);
 
 /* These can have wildcards, don't try too hard. */
-static inline int inet_lhashfn(const unsigned short num)
+static inline int inet_lhashfn(struct net *net, const unsigned short num)
 {
-	return num & (INET_LHTABLE_SIZE - 1);
+	return (num + net_hash_mix(net)) & (INET_LHTABLE_SIZE - 1);
 }
 
 static inline int inet_sk_listen_hashfn(const struct sock *sk)
 {
-	return inet_lhashfn(inet_sk(sk)->num);
+	return inet_lhashfn(sock_net(sk), inet_sk(sk)->num);
 }
 
 /* Caller must disable local BH processing. */
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 9fabe5b38912..643e26be058e 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -25,6 +25,7 @@
 #include <net/sock.h>
 #include <net/request_sock.h>
 #include <net/route.h>
+#include <net/netns/hash.h>
 
 /** struct ip_options - IP Options
  *
@@ -171,13 +172,14 @@ extern int inet_sk_rebuild_header(struct sock *sk);
 extern u32 inet_ehash_secret;
 extern void build_ehash_secret(void);
 
-static inline unsigned int inet_ehashfn(const __be32 laddr, const __u16 lport,
+static inline unsigned int inet_ehashfn(struct net *net,
+					const __be32 laddr, const __u16 lport,
 					const __be32 faddr, const __be16 fport)
 {
 	return jhash_3words((__force __u32) laddr,
 			    (__force __u32) faddr,
 			    ((__u32) lport) << 16 | (__force __u32)fport,
-			    inet_ehash_secret);
+			    inet_ehash_secret + net_hash_mix(net));
 }
 
 static inline int inet_sk_ehashfn(const struct sock *sk)
@@ -187,8 +189,9 @@ static inline int inet_sk_ehashfn(const struct sock *sk)
 	const __u16 lport = inet->num;
 	const __be32 faddr = inet->daddr;
 	const __be16 fport = inet->dport;
+	struct net *net = sock_net(sk);
 
-	return inet_ehashfn(laddr, lport, faddr, fport);
+	return inet_ehashfn(net, laddr, lport, faddr, fport);
 }
 
 
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index ad8404b56113..15e1f8fe4c1f 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -1,8 +1,6 @@
 /*
  *		INETPEER - A storage for permanent information about peers
  *
- *  Version:	$Id: inetpeer.h,v 1.2 2002/01/12 07:54:56 davem Exp $
- *
  *  Authors:	Andrey V. Savochkin <saw@msu.ru>
  */
 
diff --git a/include/net/ip.h b/include/net/ip.h
index 3b40bc2234be..250e6ef025a4 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -156,17 +156,14 @@ struct ipv4_config
 };
 
 extern struct ipv4_config ipv4_config;
-DECLARE_SNMP_STAT(struct ipstats_mib, ip_statistics);
-#define IP_INC_STATS(field)		SNMP_INC_STATS(ip_statistics, field)
-#define IP_INC_STATS_BH(field)		SNMP_INC_STATS_BH(ip_statistics, field)
-#define IP_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(ip_statistics, field)
-#define IP_ADD_STATS_BH(field, val)	SNMP_ADD_STATS_BH(ip_statistics, field, val)
-DECLARE_SNMP_STAT(struct linux_mib, net_statistics);
-#define NET_INC_STATS(field)		SNMP_INC_STATS(net_statistics, field)
-#define NET_INC_STATS_BH(field)		SNMP_INC_STATS_BH(net_statistics, field)
-#define NET_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(net_statistics, field)
-#define NET_ADD_STATS_BH(field, adnd)	SNMP_ADD_STATS_BH(net_statistics, field, adnd)
-#define NET_ADD_STATS_USER(field, adnd)	SNMP_ADD_STATS_USER(net_statistics, field, adnd)
+#define IP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.ip_statistics, field)
+#define IP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.ip_statistics, field)
+#define IP_ADD_STATS_BH(net, field, val) SNMP_ADD_STATS_BH((net)->mib.ip_statistics, field, val)
+#define NET_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.net_statistics, field)
+#define NET_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.net_statistics, field)
+#define NET_INC_STATS_USER(net, field) 	SNMP_INC_STATS_USER((net)->mib.net_statistics, field)
+#define NET_ADD_STATS_BH(net, field, adnd) SNMP_ADD_STATS_BH((net)->mib.net_statistics, field, adnd)
+#define NET_ADD_STATS_USER(net, field, adnd) SNMP_ADD_STATS_USER((net)->mib.net_statistics, field, adnd)
 
 extern unsigned long snmp_fold_field(void *mib[], int offt);
 extern int snmp_mib_init(void *ptr[2], size_t mibsize);
@@ -191,6 +188,8 @@ extern int sysctl_ip_dynaddr;
 
 extern void ipfrag_init(void);
 
+extern void ip_static_sysctl_init(void);
+
 #ifdef CONFIG_INET
 #include <net/dst.h>
 
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 9313491e3dad..2f8b3c06a101 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -68,7 +68,7 @@ extern struct rt6_info		*rt6_lookup(struct net *net,
 extern struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
 					 struct neighbour *neigh,
 					 const struct in6_addr *addr);
-extern int icmp6_dst_gc(int *more);
+extern int icmp6_dst_gc(void);
 
 extern void fib6_force_start_gc(struct net *net);
 
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index 6512d85f11b3..83b4e008b16d 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -1,7 +1,3 @@
-/*
- * $Id$
- */
-
 #ifndef _NET_IP6_TUNNEL_H
 #define _NET_IP6_TUNNEL_H
 
@@ -19,7 +15,6 @@
 struct ip6_tnl {
 	struct ip6_tnl *next;	/* next tunnel in list */
 	struct net_device *dev;	/* virtual device associated with tunnel */
-	struct net_device_stats stat;	/* statistics for tunnel device */
 	int recursion;		/* depth of hard_start_xmit recursion */
 	struct ip6_tnl_parm parms;	/* tunnel configuration parameters */
 	struct flowi fl;	/* flowi template for xmit */
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 9a51ebad3f1f..cbb59ebed4ae 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -3,254 +3,17 @@
  *      data structure and functionality definitions
  */
 
-#ifndef _IP_VS_H
-#define _IP_VS_H
-
-#include <asm/types.h>		/* For __uXX types */
-#include <linux/types.h>	/* For __beXX types in userland */
-
-#include <linux/sysctl.h>	/* For ctl_path */
-
-#define IP_VS_VERSION_CODE	0x010201
-#define NVERSION(version)			\
-	(version >> 16) & 0xFF,			\
-	(version >> 8) & 0xFF,			\
-	version & 0xFF
-
-/*
- *      Virtual Service Flags
- */
-#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
-#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
-
-/*
- *      Destination Server Flags
- */
-#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
-#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
-
-/*
- *      IPVS sync daemon states
- */
-#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
-#define IP_VS_STATE_MASTER	0x0001		/* started as master */
-#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
-
-/*
- *      IPVS socket options
- */
-#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
-
-#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
-#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
-#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
-#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
-#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
-#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
-#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
-#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
-#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
-#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
-#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
-
-#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
-#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
-#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
-
-
-/*
- *      IPVS Connection Flags
- */
-#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
-#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
-#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
-#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
-#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
-#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
-#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
-#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
-#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
-#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
-#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
-#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
-#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
-#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
-#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
-
-/* Move it to better place one day, for now keep it unique */
-#define NFC_IPVS_PROPERTY	0x10000
-
-#define IP_VS_SCHEDNAME_MAXLEN	16
-#define IP_VS_IFNAME_MAXLEN	16
-
-
-/*
- *	The struct ip_vs_service_user and struct ip_vs_dest_user are
- *	used to set IPVS rules through setsockopt.
- */
-struct ip_vs_service_user {
-	/* virtual service addresses */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual ip address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* virtual service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;		/* virtual service flags */
-	unsigned		timeout;	/* persistent timeout in sec */
-	__be32			netmask;	/* persistent netmask */
-};
-
-
-struct ip_vs_dest_user {
-	/* destination server address */
-	__be32			addr;
-	__be16			port;
-
-	/* real server options */
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	/* thresholds for active connections */
-	u_int32_t		u_threshold;	/* upper threshold */
-	u_int32_t		l_threshold;	/* lower threshold */
-};
-
-
-/*
- *	IPVS statistics object (for user space)
- */
-struct ip_vs_stats_user
-{
-	__u32                   conns;          /* connections scheduled */
-	__u32                   inpkts;         /* incoming packets */
-	__u32                   outpkts;        /* outgoing packets */
-	__u64                   inbytes;        /* incoming bytes */
-	__u64                   outbytes;       /* outgoing bytes */
-
-	__u32			cps;		/* current connection rate */
-	__u32			inpps;		/* current in packet rate */
-	__u32			outpps;		/* current out packet rate */
-	__u32			inbps;		/* current in byte rate */
-	__u32			outbps;		/* current out byte rate */
-};
-
-
-/* The argument to IP_VS_SO_GET_INFO */
-struct ip_vs_getinfo {
-	/* version number */
-	unsigned int		version;
-
-	/* size of connection hash table */
-	unsigned int		size;
-
-	/* number of virtual services */
-	unsigned int		num_services;
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICE */
-struct ip_vs_service_entry {
-	/* which service: user fills in these */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;          /* virtual service flags */
-	unsigned		timeout;	/* persistent timeout */
-	__be32			netmask;	/* persistent netmask */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-struct ip_vs_dest_entry {
-	__be32			addr;		/* destination address */
-	__be16			port;
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	u_int32_t		u_threshold;	/* upper threshold */
-	u_int32_t		l_threshold;	/* lower threshold */
-
-	u_int32_t		activeconns;	/* active connections */
-	u_int32_t		inactconns;	/* inactive connections */
-	u_int32_t		persistconns;	/* persistent connections */
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-/* The argument to IP_VS_SO_GET_DESTS */
-struct ip_vs_get_dests {
-	/* which service: user fills in these */
-	u_int16_t		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	u_int32_t		fwmark;		/* firwall mark of service */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* the real servers */
-	struct ip_vs_dest_entry	entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICES */
-struct ip_vs_get_services {
-	/* number of virtual services */
-	unsigned int		num_services;
-
-	/* service table */
-	struct ip_vs_service_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_TIMEOUT */
-struct ip_vs_timeout_user {
-	int			tcp_timeout;
-	int			tcp_fin_timeout;
-	int			udp_timeout;
-};
-
-
-/* The argument to IP_VS_SO_GET_DAEMON */
-struct ip_vs_daemon_user {
-	/* sync daemon state (master/backup) */
-	int			state;
-
-	/* multicast interface name */
-	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
-	/* SyncID we belong to */
-	int			syncid;
-};
+#ifndef _NET_IP_VS_H
+#define _NET_IP_VS_H
 
+#include <linux/ip_vs.h>                /* definitions shared with userland */
 
+/* old ipvsadm versions still include this file directly */
 #ifdef __KERNEL__
 
+#include <asm/types.h>                  /* for __uXX types */
+
+#include <linux/sysctl.h>               /* for ctl_path */
 #include <linux/list.h>                 /* for struct list_head */
 #include <linux/spinlock.h>             /* for struct rwlock_t */
 #include <asm/atomic.h>                 /* for struct atomic_t */
@@ -981,4 +744,4 @@ static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum)
 
 #endif /* __KERNEL__ */
 
-#endif	/* _IP_VS_H */
+#endif	/* _NET_IP_VS_H */
diff --git a/include/net/ipcomp.h b/include/net/ipcomp.h
index 330b74e813a9..2a1092abaa07 100644
--- a/include/net/ipcomp.h
+++ b/include/net/ipcomp.h
@@ -14,6 +14,12 @@ struct ipcomp_data {
 
 struct ip_comp_hdr;
 struct sk_buff;
+struct xfrm_state;
+
+int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb);
+int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb);
+void ipcomp_destroy(struct xfrm_state *x);
+int ipcomp_init_state(struct xfrm_state *x);
 
 static inline struct ip_comp_hdr *ip_comp_hdr(const struct sk_buff *skb)
 {
diff --git a/include/net/ipconfig.h b/include/net/ipconfig.h
index 3924d7d2cb11..c74cc1bd5a02 100644
--- a/include/net/ipconfig.h
+++ b/include/net/ipconfig.h
@@ -1,6 +1,4 @@
 /*
- *  $Id: ipconfig.h,v 1.4 2001/04/30 04:51:46 davem Exp $
- *
  *  Copyright (C) 1997 Martin Mares
  *
  *  Automatic IP Layer Configuration
diff --git a/include/net/ipip.h b/include/net/ipip.h
index 633ed4def8e3..a85bda64b852 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -11,7 +11,6 @@ struct ip_tunnel
 {
 	struct ip_tunnel	*next;
 	struct net_device	*dev;
-	struct net_device_stats	stat;
 
 	int			recursion;	/* Depth of hard_start_xmit recursion */
 	int			err_count;	/* Number of arrived ICMP errors */
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index f422f7218e1c..113028fb8f66 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -4,8 +4,6 @@
  *	Authors:
  *	Pedro Roque		<roque@di.fc.ul.pt>
  *
- *	$Id: ipv6.h,v 1.1 2002/05/20 15:13:07 jgrimm Exp $
- *
  *	This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
  *      as published by the Free Software Foundation; either version
@@ -133,7 +131,6 @@ DECLARE_SNMP_STAT(struct ipstats_mib, ipv6_statistics);
 
 #define IP6_INC_STATS(idev,field)	_DEVINC(ipv6, , idev, field)
 #define IP6_INC_STATS_BH(idev,field)	_DEVINC(ipv6, _BH, idev, field)
-#define IP6_INC_STATS_USER(idev,field)	_DEVINC(ipv6, _USER, idev, field)
 #define IP6_ADD_STATS_BH(idev,field,val) _DEVADD(ipv6, _BH, idev, field, val)
 
 DECLARE_SNMP_STAT(struct icmpv6_mib, icmpv6_statistics);
@@ -141,20 +138,15 @@ DECLARE_SNMP_STAT(struct icmpv6msg_mib, icmpv6msg_statistics);
 
 #define ICMP6_INC_STATS(idev, field)	_DEVINC(icmpv6, , idev, field)
 #define ICMP6_INC_STATS_BH(idev, field)	_DEVINC(icmpv6, _BH, idev, field)
-#define ICMP6_INC_STATS_USER(idev, field) _DEVINC(icmpv6, _USER, idev, field)
 
 #define ICMP6MSGOUT_INC_STATS(idev, field) \
 	_DEVINC(icmpv6msg, , idev, field +256)
 #define ICMP6MSGOUT_INC_STATS_BH(idev, field) \
 	_DEVINC(icmpv6msg, _BH, idev, field +256)
-#define ICMP6MSGOUT_INC_STATS_USER(idev, field) \
-	_DEVINC(icmpv6msg, _USER, idev, field +256)
 #define ICMP6MSGIN_INC_STATS(idev, field) \
 	 _DEVINC(icmpv6msg, , idev, field)
 #define ICMP6MSGIN_INC_STATS_BH(idev, field) \
 	_DEVINC(icmpv6msg, _BH, idev, field)
-#define ICMP6MSGIN_INC_STATS_USER(idev, field) \
-	_DEVINC(icmpv6msg, _USER, idev, field)
 
 struct ip6_ra_chain
 {
@@ -229,9 +221,7 @@ static inline void fl6_sock_release(struct ip6_flowlabel *fl)
 		atomic_dec(&fl->users);
 }
 
-extern int 			ip6_ra_control(struct sock *sk, int sel,
-					       void (*destructor)(struct sock *));
-
+extern int 			ip6_ra_control(struct sock *sk, int sel);
 
 extern int			ipv6_parse_hopopts(struct sk_buff *skb);
 
@@ -618,6 +608,8 @@ extern struct ctl_table *ipv6_icmp_sysctl_init(struct net *net);
 extern struct ctl_table *ipv6_route_sysctl_init(struct net *net);
 extern int ipv6_sysctl_register(void);
 extern void ipv6_sysctl_unregister(void);
+extern int ipv6_static_sysctl_register(void);
+extern void ipv6_static_sysctl_unregister(void);
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h
index f70e9b39ebaf..3025ae17ddbe 100644
--- a/include/net/irda/irda_device.h
+++ b/include/net/irda/irda_device.h
@@ -223,7 +223,7 @@ int  irda_device_is_receiving(struct net_device *dev);
 /* Interface for internal use */
 static inline int irda_device_txqueue_empty(const struct net_device *dev)
 {
-	return skb_queue_empty(&dev->qdisc->q);
+	return qdisc_all_tx_empty(dev);
 }
 int  irda_device_set_raw_mode(struct net_device* self, int status);
 struct net_device *alloc_irdadev(int sizeof_priv);
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
index 369d50e08b99..51b9a37de991 100644
--- a/include/net/iw_handler.h
+++ b/include/net/iw_handler.h
@@ -256,7 +256,7 @@
 #define EIWCOMMIT	EINPROGRESS
 
 /* Flags available in struct iw_request_info */
-#define IW_REQUEST_FLAG_NONE	0x0000	/* No flag so far */
+#define IW_REQUEST_FLAG_COMPAT	0x0001	/* Compat ioctl call */
 
 /* Type of headers we know about (basically union iwreq_data) */
 #define IW_HEADER_TYPE_NULL	0	/* Not available */
@@ -478,105 +478,58 @@ extern void wireless_spy_update(struct net_device *	dev,
  * Function that are so simple that it's more efficient inlining them
  */
 
-/*------------------------------------------------------------------*/
-/*
- * Wrapper to add an Wireless Event to a stream of events.
- */
-static inline char *
-iwe_stream_add_event(char *	stream,		/* Stream of events */
-		     char *	ends,		/* End of stream */
-		     struct iw_event *iwe,	/* Payload */
-		     int	event_len)	/* Real size of payload */
+static inline int iwe_stream_lcp_len(struct iw_request_info *info)
 {
-	/* Check if it's possible */
-	if(likely((stream + event_len) < ends)) {
-		iwe->len = event_len;
-		/* Beware of alignement issues on 64 bits */
-		memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
-		memcpy(stream + IW_EV_LCP_LEN,
-		       ((char *) iwe) + IW_EV_LCP_LEN,
-		       event_len - IW_EV_LCP_LEN);
-		stream += event_len;
-	}
-	return stream;
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT)
+		return IW_EV_COMPAT_LCP_LEN;
+#endif
+	return IW_EV_LCP_LEN;
 }
 
-/*------------------------------------------------------------------*/
-/*
- * Wrapper to add an short Wireless Event containing a pointer to a
- * stream of events.
- */
-static inline char *
-iwe_stream_add_point(char *	stream,		/* Stream of events */
-		     char *	ends,		/* End of stream */
-		     struct iw_event *iwe,	/* Payload length + flags */
-		     char *	extra)		/* More payload */
+static inline int iwe_stream_point_len(struct iw_request_info *info)
 {
-	int	event_len = IW_EV_POINT_LEN + iwe->u.data.length;
-	/* Check if it's possible */
-	if(likely((stream + event_len) < ends)) {
-		iwe->len = event_len;
-		memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
-		memcpy(stream + IW_EV_LCP_LEN,
-		       ((char *) iwe) + IW_EV_LCP_LEN + IW_EV_POINT_OFF,
-		       IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
-		memcpy(stream + IW_EV_POINT_LEN, extra, iwe->u.data.length);
-		stream += event_len;
-	}
-	return stream;
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT)
+		return IW_EV_COMPAT_POINT_LEN;
+#endif
+	return IW_EV_POINT_LEN;
 }
 
-/*------------------------------------------------------------------*/
-/*
- * Wrapper to add a value to a Wireless Event in a stream of events.
- * Be careful, this one is tricky to use properly :
- * At the first run, you need to have (value = event + IW_EV_LCP_LEN).
- */
-static inline char *
-iwe_stream_add_value(char *	event,		/* Event in the stream */
-		     char *	value,		/* Value in event */
-		     char *	ends,		/* End of stream */
-		     struct iw_event *iwe,	/* Payload */
-		     int	event_len)	/* Real size of payload */
+static inline int iwe_stream_event_len_adjust(struct iw_request_info *info,
+					      int event_len)
 {
-	/* Don't duplicate LCP */
-	event_len -= IW_EV_LCP_LEN;
-
-	/* Check if it's possible */
-	if(likely((value + event_len) < ends)) {
-		/* Add new value */
-		memcpy(value, (char *) iwe + IW_EV_LCP_LEN, event_len);
-		value += event_len;
-		/* Patch LCP */
-		iwe->len = value - event;
-		memcpy(event, (char *) iwe, IW_EV_LCP_LEN);
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT) {
+		event_len -= IW_EV_LCP_LEN;
+		event_len += IW_EV_COMPAT_LCP_LEN;
 	}
-	return value;
+#endif
+
+	return event_len;
 }
 
 /*------------------------------------------------------------------*/
 /*
  * Wrapper to add an Wireless Event to a stream of events.
- * Same as above, with explicit error check...
  */
 static inline char *
-iwe_stream_check_add_event(char *	stream,		/* Stream of events */
-			   char *	ends,		/* End of stream */
-			   struct iw_event *iwe,	/* Payload */
-			   int		event_len,	/* Size of payload */
-			   int *	perr)		/* Error report */
+iwe_stream_add_event(struct iw_request_info *info, char *stream, char *ends,
+		     struct iw_event *iwe, int event_len)
 {
-	/* Check if it's possible, set error if not */
+	int lcp_len = iwe_stream_lcp_len(info);
+
+	event_len = iwe_stream_event_len_adjust(info, event_len);
+
+	/* Check if it's possible */
 	if(likely((stream + event_len) < ends)) {
 		iwe->len = event_len;
 		/* Beware of alignement issues on 64 bits */
 		memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
-		memcpy(stream + IW_EV_LCP_LEN,
-		       ((char *) iwe) + IW_EV_LCP_LEN,
-		       event_len - IW_EV_LCP_LEN);
+		memcpy(stream + lcp_len, &iwe->u,
+		       event_len - lcp_len);
 		stream += event_len;
-	} else
-		*perr = -E2BIG;
+	}
 	return stream;
 }
 
@@ -584,27 +537,25 @@ iwe_stream_check_add_event(char *	stream,		/* Stream of events */
 /*
  * Wrapper to add an short Wireless Event containing a pointer to a
  * stream of events.
- * Same as above, with explicit error check...
  */
 static inline char *
-iwe_stream_check_add_point(char *	stream,		/* Stream of events */
-			   char *	ends,		/* End of stream */
-			   struct iw_event *iwe,	/* Payload length + flags */
-			   char *	extra,		/* More payload */
-			   int *	perr)		/* Error report */
+iwe_stream_add_point(struct iw_request_info *info, char *stream, char *ends,
+		     struct iw_event *iwe, char *extra)
 {
-	int	event_len = IW_EV_POINT_LEN + iwe->u.data.length;
+	int event_len = iwe_stream_point_len(info) + iwe->u.data.length;
+	int point_len = iwe_stream_point_len(info);
+	int lcp_len   = iwe_stream_lcp_len(info);
+
 	/* Check if it's possible */
 	if(likely((stream + event_len) < ends)) {
 		iwe->len = event_len;
 		memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
-		memcpy(stream + IW_EV_LCP_LEN,
-		       ((char *) iwe) + IW_EV_LCP_LEN + IW_EV_POINT_OFF,
+		memcpy(stream + lcp_len,
+		       ((char *) &iwe->u) + IW_EV_POINT_OFF,
 		       IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
-		memcpy(stream + IW_EV_POINT_LEN, extra, iwe->u.data.length);
+		memcpy(stream + point_len, extra, iwe->u.data.length);
 		stream += event_len;
-	} else
-		*perr = -E2BIG;
+	}
 	return stream;
 }
 
@@ -613,29 +564,25 @@ iwe_stream_check_add_point(char *	stream,		/* Stream of events */
  * Wrapper to add a value to a Wireless Event in a stream of events.
  * Be careful, this one is tricky to use properly :
  * At the first run, you need to have (value = event + IW_EV_LCP_LEN).
- * Same as above, with explicit error check...
  */
 static inline char *
-iwe_stream_check_add_value(char *	event,		/* Event in the stream */
-			   char *	value,		/* Value in event */
-			   char *	ends,		/* End of stream */
-			   struct iw_event *iwe,	/* Payload */
-			   int		event_len,	/* Size of payload */
-			   int *	perr)		/* Error report */
+iwe_stream_add_value(struct iw_request_info *info, char *event, char *value,
+		     char *ends, struct iw_event *iwe, int event_len)
 {
+	int lcp_len = iwe_stream_lcp_len(info);
+
 	/* Don't duplicate LCP */
 	event_len -= IW_EV_LCP_LEN;
 
 	/* Check if it's possible */
 	if(likely((value + event_len) < ends)) {
 		/* Add new value */
-		memcpy(value, (char *) iwe + IW_EV_LCP_LEN, event_len);
+		memcpy(value, &iwe->u, event_len);
 		value += event_len;
 		/* Patch LCP */
 		iwe->len = value - event;
-		memcpy(event, (char *) iwe, IW_EV_LCP_LEN);
-	} else
-		*perr = -E2BIG;
+		memcpy(event, (char *) iwe, lcp_len);
+	}
 	return value;
 }
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index bcd1623245cb..b397e4d984c7 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -42,7 +42,7 @@
  * tasklet function.
  *
  * NOTE: If the driver opts to use the _irqsafe() functions, it may not also
- *	 use the non-irqsafe functions!
+ *	 use the non-IRQ-safe functions!
  */
 
 /**
@@ -85,7 +85,7 @@ enum ieee80211_notification_types {
  * struct ieee80211_ht_bss_info - describing BSS's HT characteristics
  *
  * This structure describes most essential parameters needed
- * to describe 802.11n HT characteristics in a BSS
+ * to describe 802.11n HT characteristics in a BSS.
  *
  * @primary_channel: channel number of primery channel
  * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width)
@@ -98,77 +98,49 @@ struct ieee80211_ht_bss_info {
 };
 
 /**
+ * enum ieee80211_max_queues - maximum number of queues
+ *
+ * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ * @IEEE80211_MAX_AMPDU_QUEUES: Maximum number of queues usable
+ *	for A-MPDU operation.
+ */
+enum ieee80211_max_queues {
+	IEEE80211_MAX_QUEUES =		16,
+	IEEE80211_MAX_AMPDU_QUEUES =	16,
+};
+
+/**
  * struct ieee80211_tx_queue_params - transmit queue configuration
  *
  * The information provided in this structure is required for QoS
  * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29.
  *
- * @aifs: arbitration interface space [0..255, -1: use default]
- * @cw_min: minimum contention window [will be a value of the form
- *	2^n-1 in the range 1..1023; 0: use default]
+ * @aifs: arbitration interface space [0..255]
+ * @cw_min: minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
  * @cw_max: maximum contention window [like @cw_min]
  * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled
  */
 struct ieee80211_tx_queue_params {
-	s16 aifs;
+	u16 txop;
 	u16 cw_min;
 	u16 cw_max;
-	u16 txop;
+	u8 aifs;
 };
 
 /**
- * struct ieee80211_tx_queue_stats_data - transmit queue statistics
+ * struct ieee80211_tx_queue_stats - transmit queue statistics
  *
  * @len: number of packets in queue
  * @limit: queue length limit
  * @count: number of frames sent
  */
-struct ieee80211_tx_queue_stats_data {
+struct ieee80211_tx_queue_stats {
 	unsigned int len;
 	unsigned int limit;
 	unsigned int count;
 };
 
-/**
- * enum ieee80211_tx_queue - transmit queue number
- *
- * These constants are used with some callbacks that take a
- * queue number to set parameters for a queue.
- *
- * @IEEE80211_TX_QUEUE_DATA0: data queue 0
- * @IEEE80211_TX_QUEUE_DATA1: data queue 1
- * @IEEE80211_TX_QUEUE_DATA2: data queue 2
- * @IEEE80211_TX_QUEUE_DATA3: data queue 3
- * @IEEE80211_TX_QUEUE_DATA4: data queue 4
- * @IEEE80211_TX_QUEUE_SVP: ??
- * @NUM_TX_DATA_QUEUES: number of data queues
- * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be
- *	sent after a beacon
- * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames
- * @NUM_TX_DATA_QUEUES_AMPDU: adding more queues for A-MPDU
- */
-enum ieee80211_tx_queue {
-	IEEE80211_TX_QUEUE_DATA0,
-	IEEE80211_TX_QUEUE_DATA1,
-	IEEE80211_TX_QUEUE_DATA2,
-	IEEE80211_TX_QUEUE_DATA3,
-	IEEE80211_TX_QUEUE_DATA4,
-	IEEE80211_TX_QUEUE_SVP,
-
-	NUM_TX_DATA_QUEUES,
-
-/* due to stupidity in the sub-ioctl userspace interface, the items in
- * this struct need to have fixed values. As soon as it is removed, we can
- * fix these entries. */
-	IEEE80211_TX_QUEUE_AFTER_BEACON = 6,
-	IEEE80211_TX_QUEUE_BEACON = 7,
-	NUM_TX_DATA_QUEUES_AMPDU = 16
-};
-
-struct ieee80211_tx_queue_stats {
-	struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES_AMPDU];
-};
-
 struct ieee80211_low_level_stats {
 	unsigned int dot11ACKFailureCount;
 	unsigned int dot11RTSFailureCount;
@@ -205,9 +177,10 @@ enum ieee80211_bss_change {
  * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble
+ * @dtim_period: num of beacons before the next DTIM, for PSM
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
- * @assoc_capability: capabbilities taken from assoc resp
+ * @assoc_capability: capabilities taken from assoc resp
  * @assoc_ht: association in HT mode
  * @ht_conf: ht capabilities
  * @ht_bss_conf: ht extended capabilities
@@ -219,6 +192,7 @@ struct ieee80211_bss_conf {
 	/* erp related data */
 	bool use_cts_prot;
 	bool use_short_preamble;
+	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
@@ -229,91 +203,145 @@ struct ieee80211_bss_conf {
 };
 
 /**
- * enum mac80211_tx_control_flags - flags to describe Tx configuration for
- * 				    the Tx frame
- *
- * These flags are used with the @flags member of &ieee80211_tx_control
- *
- * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption;
- * 				    e.g., for EAPOL frame
- * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame
- * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
- * 				     for combined 802.11g / 802.11b networks)
- * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack
- * @IEEE80211_TXCTL_RATE_CTRL_PROBE
- * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter
- *                                 for destination station
- * @IEEE80211_TXCTL_REQUEUE:
- * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame
- * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the
- * 				      through set_retry_limit configured long
- * 				      retry value
- * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211
- * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
- * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU
- * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
- * 			     of streams when this flag is on can be extracted
- *			     from antenna_sel_tx, so if 1 antenna is marked
- *			     use SISO, 2 antennas marked use MIMO, n antennas
- *			     marked use MIMO_n.
- * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame
- * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width
- * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels
- * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval
+ * enum mac80211_tx_control_flags - flags to describe transmission information/status
+ *
+ * These flags are used with the @flags member of &ieee80211_tx_info.
+ *
+ * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
+ * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
+ * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
+ *	for combined 802.11g / 802.11b networks)
+ * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack
+ * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD
+ * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination
+ *	station
+ * @IEEE80211_TX_CTL_REQUEUE: TBD
+ * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame
+ * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
+ * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
+ *	through set_retry_limit configured long retry value
+ * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
+ * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
+ *	of streams when this flag is on can be extracted from antenna_sel_tx,
+ *	so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n
+ *	antennas marked use MIMO_n.
+ * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame
+ * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width
+ * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels
+ * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval
+ * @IEEE80211_TX_CTL_INJECTED: TBD
+ * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted
+ *	because the destination STA was in powersave mode.
+ * @IEEE80211_TX_STAT_ACK: Frame was acknowledged
+ * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status
+ * 	is for the whole aggregation.
+ * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
+ * 	so consider using block ack request (BAR).
+ * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
+ *	number to this frame, taking care of not overwriting the fragment
+ *	number and increasing the sequence number only when the
+ *	IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly
+ *	assign sequence numbers to QoS-data frames but cannot do so correctly
+ *	for non-QoS-data and management frames because beacons need them from
+ *	that counter as well and mac80211 cannot guarantee proper sequencing.
+ *	If this flag is set, the driver should instruct the hardware to
+ *	assign a sequence number to the frame or assign one itself. Cf. IEEE
+ *	802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
+ *	beacons always be clear for frames without a sequence number field.
  */
 enum mac80211_tx_control_flags {
-	IEEE80211_TXCTL_REQ_TX_STATUS		= (1<<0),
-	IEEE80211_TXCTL_DO_NOT_ENCRYPT		= (1<<1),
-	IEEE80211_TXCTL_USE_RTS_CTS		= (1<<2),
-	IEEE80211_TXCTL_USE_CTS_PROTECT		= (1<<3),
-	IEEE80211_TXCTL_NO_ACK			= (1<<4),
-	IEEE80211_TXCTL_RATE_CTRL_PROBE		= (1<<5),
-	IEEE80211_TXCTL_CLEAR_PS_FILT		= (1<<6),
-	IEEE80211_TXCTL_REQUEUE			= (1<<7),
-	IEEE80211_TXCTL_FIRST_FRAGMENT		= (1<<8),
-	IEEE80211_TXCTL_SHORT_PREAMBLE		= (1<<9),
-	IEEE80211_TXCTL_LONG_RETRY_LIMIT	= (1<<10),
-	IEEE80211_TXCTL_EAPOL_FRAME		= (1<<11),
-	IEEE80211_TXCTL_SEND_AFTER_DTIM		= (1<<12),
-	IEEE80211_TXCTL_AMPDU			= (1<<13),
-	IEEE80211_TXCTL_OFDM_HT			= (1<<14),
-	IEEE80211_TXCTL_GREEN_FIELD		= (1<<15),
-	IEEE80211_TXCTL_40_MHZ_WIDTH		= (1<<16),
-	IEEE80211_TXCTL_DUP_DATA		= (1<<17),
-	IEEE80211_TXCTL_SHORT_GI		= (1<<18),
+	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
+	IEEE80211_TX_CTL_USE_RTS_CTS		= BIT(2),
+	IEEE80211_TX_CTL_USE_CTS_PROTECT	= BIT(3),
+	IEEE80211_TX_CTL_NO_ACK			= BIT(4),
+	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(5),
+	IEEE80211_TX_CTL_CLEAR_PS_FILT		= BIT(6),
+	IEEE80211_TX_CTL_REQUEUE		= BIT(7),
+	IEEE80211_TX_CTL_FIRST_FRAGMENT		= BIT(8),
+	IEEE80211_TX_CTL_SHORT_PREAMBLE		= BIT(9),
+	IEEE80211_TX_CTL_LONG_RETRY_LIMIT	= BIT(10),
+	IEEE80211_TX_CTL_SEND_AFTER_DTIM	= BIT(12),
+	IEEE80211_TX_CTL_AMPDU			= BIT(13),
+	IEEE80211_TX_CTL_OFDM_HT		= BIT(14),
+	IEEE80211_TX_CTL_GREEN_FIELD		= BIT(15),
+	IEEE80211_TX_CTL_40_MHZ_WIDTH		= BIT(16),
+	IEEE80211_TX_CTL_DUP_DATA		= BIT(17),
+	IEEE80211_TX_CTL_SHORT_GI		= BIT(18),
+	IEEE80211_TX_CTL_INJECTED		= BIT(19),
+	IEEE80211_TX_STAT_TX_FILTERED		= BIT(20),
+	IEEE80211_TX_STAT_ACK			= BIT(21),
+	IEEE80211_TX_STAT_AMPDU			= BIT(22),
+	IEEE80211_TX_STAT_AMPDU_NO_BACK		= BIT(23),
+	IEEE80211_TX_CTL_ASSIGN_SEQ		= BIT(24),
 };
 
-/* Transmit control fields. This data structure is passed to low-level driver
- * with each TX frame. The low-level driver is responsible for configuring
- * the hardware to use given values (depending on what is supported). */
 
-struct ieee80211_tx_control {
-	struct ieee80211_vif *vif;
-	struct ieee80211_rate *tx_rate;
-
-	/* Transmit rate for RTS/CTS frame */
-	struct ieee80211_rate *rts_cts_rate;
-
-	/* retry rate for the last retries */
-	struct ieee80211_rate *alt_retry_rate;
-
-	u32 flags;		/* tx control flags defined above */
-	u8 key_idx;		/* keyidx from hw->set_key(), undefined if
-				 * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */
-	u8 retry_limit;		/* 1 = only first attempt, 2 = one retry, ..
-				 * This could be used when set_retry_limit
-				 * is not implemented by the driver */
-	u8 antenna_sel_tx; 	/* 0 = default/diversity, otherwise bit
-				 * position represents antenna number used */
-	u8 icv_len;		/* length of the ICV/MIC field in octets */
-	u8 iv_len;		/* length of the IV field in octets */
-	u8 queue;		/* hardware queue to use for this frame;
-				 * 0 = highest, hw->queues-1 = lowest */
-	u16 aid;		/* Station AID */
-	int type;	/* internal */
+#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \
+	(sizeof(((struct sk_buff *)0)->cb) - 8)
+#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \
+	(IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *))
+
+/**
+ * struct ieee80211_tx_info - skb transmit information
+ *
+ * This structure is placed in skb->cb for three uses:
+ *  (1) mac80211 TX control - mac80211 tells the driver what to do
+ *  (2) driver internal use (if applicable)
+ *  (3) TX status information - driver tells mac80211 what happened
+ *
+ * @flags: transmit info flags, defined above
+ * @band: TBD
+ * @tx_rate_idx: TBD
+ * @antenna_sel_tx: TBD
+ * @control: union for control data
+ * @status: union for status data
+ * @driver_data: array of driver_data pointers
+ * @retry_count: number of retries
+ * @excessive_retries: set to 1 if the frame was retried many times
+ *	but not acknowledged
+ * @ampdu_ack_len: number of aggregated frames.
+ * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
+ * @ampdu_ack_map: block ack bit map for the aggregation.
+ * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
+ * @ack_signal: signal strength of the ACK frame
+ */
+struct ieee80211_tx_info {
+	/* common information */
+	u32 flags;
+	u8 band;
+	s8 tx_rate_idx;
+	u8 antenna_sel_tx;
+
+	/* 1 byte hole */
+
+	union {
+		struct {
+			struct ieee80211_vif *vif;
+			struct ieee80211_key_conf *hw_key;
+			unsigned long jiffies;
+			u16 aid;
+			s8 rts_cts_rate_idx, alt_retry_rate_idx;
+			u8 retry_limit;
+			u8 icv_len;
+			u8 iv_len;
+		} control;
+		struct {
+			u64 ampdu_ack_map;
+			int ack_signal;
+			u8 retry_count;
+			bool excessive_retries;
+			u8 ampdu_ack_len;
+		} status;
+		void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS];
+	};
 };
 
+static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
+{
+	return (struct ieee80211_tx_info *)skb->cb;
+}
+
 
 /**
  * enum mac80211_rx_flags - receive flags
@@ -353,13 +381,16 @@ enum mac80211_rx_flags {
  * The low-level driver should provide this information (the subset
  * supported by hardware) to the 802.11 code with each received
  * frame.
+ *
  * @mactime: value in microseconds of the 64-bit Time Synchronization Function
  * 	(TSF) timer when the first data symbol (MPDU) arrived at the hardware.
  * @band: the active band when this frame was received
  * @freq: frequency the radio was tuned to when receiving this frame, in MHz
- * @ssi: signal strength when receiving this frame
- * @signal: used as 'qual' in statistics reporting
- * @noise: PHY noise when receiving this frame
+ * @signal: signal strength when receiving this frame, either in dBm, in dB or
+ *	unspecified depending on the hardware capabilities flags
+ *	@IEEE80211_HW_SIGNAL_*
+ * @noise: noise when receiving this frame, in dBm.
+ * @qual: overall signal quality indication, in percent (0-100).
  * @antenna: antenna used
  * @rate_idx: index of data rate into band's supported rates
  * @flag: %RX_FLAG_*
@@ -368,64 +399,15 @@ struct ieee80211_rx_status {
 	u64 mactime;
 	enum ieee80211_band band;
 	int freq;
-	int ssi;
 	int signal;
 	int noise;
+	int qual;
 	int antenna;
 	int rate_idx;
 	int flag;
 };
 
 /**
- * enum ieee80211_tx_status_flags - transmit status flags
- *
- * Status flags to indicate various transmit conditions.
- *
- * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted
- *	because the destination STA was in powersave mode.
- * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged
- * @IEEE80211_TX_STATUS_AMPDU: The frame was aggregated, so status
- * 	is for the whole aggregation.
- */
-enum ieee80211_tx_status_flags {
-	IEEE80211_TX_STATUS_TX_FILTERED	= 1<<0,
-	IEEE80211_TX_STATUS_ACK		= 1<<1,
-	IEEE80211_TX_STATUS_AMPDU	= 1<<2,
-};
-
-/**
- * struct ieee80211_tx_status - transmit status
- *
- * As much information as possible should be provided for each transmitted
- * frame with ieee80211_tx_status().
- *
- * @control: a copy of the &struct ieee80211_tx_control passed to the driver
- *	in the tx() callback.
- * @flags: transmit status flags, defined above
- * @retry_count: number of retries
- * @excessive_retries: set to 1 if the frame was retried many times
- *	but not acknowledged
- * @ampdu_ack_len: number of aggregated frames.
- * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
- * @ampdu_ack_map: block ack bit map for the aggregation.
- * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
- * @ack_signal: signal strength of the ACK frame
- * @queue_length: ?? REMOVE
- * @queue_number: ?? REMOVE
- */
-struct ieee80211_tx_status {
-	struct ieee80211_tx_control control;
-	u8 flags;
-	u8 retry_count;
-	bool excessive_retries;
-	u8 ampdu_ack_len;
-	u64 ampdu_ack_map;
-	int ack_signal;
-	int queue_length;
-	int queue_number;
-};
-
-/**
  * enum ieee80211_conf_flags - configuration flags
  *
  * Flags to define PHY configuration options
@@ -433,11 +415,13 @@ struct ieee80211_tx_status {
  * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time
  * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
  * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported)
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode
  */
 enum ieee80211_conf_flags {
 	IEEE80211_CONF_SHORT_SLOT_TIME	= (1<<0),
 	IEEE80211_CONF_RADIOTAP		= (1<<1),
 	IEEE80211_CONF_SUPPORT_HT_MODE	= (1<<2),
+	IEEE80211_CONF_PS		= (1<<3),
 };
 
 /**
@@ -448,6 +432,7 @@ enum ieee80211_conf_flags {
  * @radio_enabled: when zero, driver is required to switch off the radio.
  *	TODO make a flag
  * @beacon_int: beacon interval (TODO make interface config)
+ * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
  * @max_antenna_gain: maximum antenna gain (in dBi)
@@ -462,6 +447,7 @@ struct ieee80211_conf {
 	int radio_enabled;
 
 	int beacon_int;
+	u16 listen_interval;
 	u32 flags;
 	int power_level;
 	int max_antenna_gain;
@@ -553,34 +539,38 @@ struct ieee80211_if_init_conf {
 };
 
 /**
+ * enum ieee80211_if_conf_change - interface config change flags
+ *
+ * @IEEE80211_IFCC_BSSID: The BSSID changed.
+ * @IEEE80211_IFCC_SSID: The SSID changed.
+ * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
+ *	(currently AP and MESH only), use ieee80211_beacon_get().
+ */
+enum ieee80211_if_conf_change {
+	IEEE80211_IFCC_BSSID	= BIT(0),
+	IEEE80211_IFCC_SSID	= BIT(1),
+	IEEE80211_IFCC_BEACON	= BIT(2),
+};
+
+/**
  * struct ieee80211_if_conf - configuration of an interface
  *
- * @type: type of the interface. This is always the same as was specified in
- *	&struct ieee80211_if_init_conf. The type of an interface never changes
- *	during the life of the interface; this field is present only for
- *	convenience.
+ * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
  * @bssid: BSSID of the network we are associated to/creating.
  * @ssid: used (together with @ssid_len) by drivers for hardware that
  *	generate beacons independently. The pointer is valid only during the
  *	config_interface() call, so copy the value somewhere if you need
  *	it.
  * @ssid_len: length of the @ssid field.
- * @beacon: beacon template. Valid only if @host_gen_beacon_template in
- *	&struct ieee80211_hw is set. The driver is responsible of freeing
- *	the sk_buff.
- * @beacon_control: tx_control for the beacon template, this field is only
- *	valid when the @beacon field was set.
  *
  * This structure is passed to the config_interface() callback of
  * &struct ieee80211_hw.
  */
 struct ieee80211_if_conf {
-	int type;
+	u32 changed;
 	u8 *bssid;
 	u8 *ssid;
 	size_t ssid_len;
-	struct sk_buff *beacon;
-	struct ieee80211_tx_control *beacon_control;
 };
 
 /**
@@ -597,8 +587,8 @@ enum ieee80211_key_alg {
 
 /**
  * enum ieee80211_key_len - key length
- * @WEP40: WEP 5 byte long key
- * @WEP104: WEP 13 byte long key
+ * @LEN_WEP40: WEP 5-byte long key
+ * @LEN_WEP104: WEP 13-byte long key
  */
 enum ieee80211_key_len {
 	LEN_WEP40 = 5,
@@ -619,11 +609,14 @@ enum ieee80211_key_len {
  * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
  *	the driver for a TKIP key if it requires Michael MIC
  *	generation in software.
+ * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
+ *	that the key is pairwise rather then a shared key.
  */
 enum ieee80211_key_flags {
 	IEEE80211_KEY_FLAG_WMM_STA	= 1<<0,
 	IEEE80211_KEY_FLAG_GENERATE_IV	= 1<<1,
 	IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
+	IEEE80211_KEY_FLAG_PAIRWISE	= 1<<3,
 };
 
 /**
@@ -639,7 +632,12 @@ enum ieee80211_key_flags {
  * @flags: key flags, see &enum ieee80211_key_flags.
  * @keyidx: the key index (0-3)
  * @keylen: key material length
- * @key: key material
+ * @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte)
+ * 	data block:
+ * 	- Temporal Encryption Key (128 bits)
+ * 	- Temporal Authenticator Tx MIC Key (64 bits)
+ * 	- Temporal Authenticator Rx MIC Key (64 bits)
+ *
  */
 struct ieee80211_key_conf {
 	enum ieee80211_key_alg alg;
@@ -667,7 +665,7 @@ enum set_key_cmd {
  * enum sta_notify_cmd - sta notify command
  *
  * Used with the sta_notify() callback in &struct ieee80211_ops, this
- * indicates addition and removal of a station to station table
+ * indicates addition and removal of a station to station table.
  *
  * @STA_NOTIFY_ADD: a station was added to the station table
  * @STA_NOTIFY_REMOVE: a station being removed from the station table
@@ -700,15 +698,6 @@ enum ieee80211_tkip_key_type {
  * any particular flags. There are some exceptions to this rule,
  * however, so you are advised to review these flags carefully.
  *
- * @IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE:
- *	The device only needs to be supplied with a beacon template.
- *	If you need the host to generate each beacon then don't use
- *	this flag and call ieee80211_beacon_get() when you need the
- *	next beacon frame. Note that if you set this flag, you must
- *	implement the set_tim() callback for powersave mode to work
- *	properly.
- *	This flag is only relevant for access-point mode.
- *
  * @IEEE80211_HW_RX_INCLUDES_FCS:
  *	Indicates that received frames passed to the stack include
  *	the FCS at the end.
@@ -730,13 +719,40 @@ enum ieee80211_tkip_key_type {
  * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
  *	Hardware is not capable of receiving frames with short preamble on
  *	the 2.4 GHz band.
+ *
+ * @IEEE80211_HW_SIGNAL_UNSPEC:
+ *	Hardware can provide signal values but we don't know its units. We
+ *	expect values between 0 and @max_signal.
+ *	If possible please provide dB or dBm instead.
+ *
+ * @IEEE80211_HW_SIGNAL_DB:
+ *	Hardware gives signal values in dB, decibel difference from an
+ *	arbitrary, fixed reference. We expect values between 0 and @max_signal.
+ *	If possible please provide dBm instead.
+ *
+ * @IEEE80211_HW_SIGNAL_DBM:
+ *	Hardware gives signal values in dBm, decibel difference from
+ *	one milliwatt. This is the preferred method since it is standardized
+ *	between different devices. @max_signal does not need to be set.
+ *
+ * @IEEE80211_HW_NOISE_DBM:
+ *	Hardware can provide noise (radio interference) values in units dBm,
+ *      decibel difference from one milliwatt.
+ *
+ * @IEEE80211_HW_SPECTRUM_MGMT:
+ * 	Hardware supports spectrum management defined in 802.11h
+ * 	Measurement, Channel Switch, Quieting, TPC
  */
 enum ieee80211_hw_flags {
-	IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE		= 1<<0,
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
 	IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING	= 1<<2,
 	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
 	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE	= 1<<4,
+	IEEE80211_HW_SIGNAL_UNSPEC			= 1<<5,
+	IEEE80211_HW_SIGNAL_DB				= 1<<6,
+	IEEE80211_HW_SIGNAL_DBM				= 1<<7,
+	IEEE80211_HW_NOISE_DBM				= 1<<8,
+	IEEE80211_HW_SPECTRUM_MGMT			= 1<<9,
 };
 
 /**
@@ -754,8 +770,11 @@ enum ieee80211_hw_flags {
  * @conf: &struct ieee80211_conf, device configuration, don't use.
  *
  * @workqueue: single threaded workqueue available for driver use,
- *	allocated by mac80211 on registration and flushed on
- *	unregistration.
+ *	allocated by mac80211 on registration and flushed when an
+ *	interface is removed.
+ *	NOTICE: All work performed on this workqueue should NEVER
+ *	acquire the RTNL lock (i.e. Don't use the function
+ *	ieee80211_iterate_active_interfaces())
  *
  * @priv: pointer to private area that was allocated for driver use
  *	along with this structure.
@@ -767,15 +786,21 @@ enum ieee80211_hw_flags {
  *
  * @channel_change_time: time (in microseconds) it takes to change channels.
  *
- * @max_rssi: Maximum value for ssi in RX information, use
- *	negative numbers for dBm and 0 to indicate no support.
+ * @max_signal: Maximum value for signal (rssi) in RX information, used
+ *     only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
  *
- * @max_signal: like @max_rssi, but for the signal value.
- *
- * @max_noise: like @max_rssi, but for the noise value.
+ * @max_listen_interval: max listen interval in units of beacon interval
+ *     that HW supports
  *
  * @queues: number of available hardware transmit queues for
- *	data packets. WMM/QoS requires at least four.
+ *	data packets. WMM/QoS requires at least four, these
+ *	queues need to have configurable access parameters.
+ *
+ * @ampdu_queues: number of available hardware transmit queues
+ *	for A-MPDU packets, these have no access parameters
+ *	because they're used only for A-MPDU frames. Note that
+ *	mac80211 will not currently use any of the regular queues
+ *	for aggregation.
  *
  * @rate_control_algorithm: rate control algorithm for this hardware.
  *	If unset (NULL), the default algorithm will be used. Must be
@@ -794,10 +819,10 @@ struct ieee80211_hw {
 	unsigned int extra_tx_headroom;
 	int channel_change_time;
 	int vif_data_size;
-	u8 queues;
-	s8 max_rssi;
+	u16 queues;
+	u16 ampdu_queues;
+	u16 max_listen_interval;
 	s8 max_signal;
-	s8 max_noise;
 };
 
 /**
@@ -822,6 +847,43 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr)
 	memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN);
 }
 
+static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw)
+{
+	return hw->queues;
+}
+
+static inline int ieee80211_num_queues(struct ieee80211_hw *hw)
+{
+	return hw->queues + hw->ampdu_queues;
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
+		      const struct ieee80211_tx_info *c)
+{
+	if (WARN_ON(c->tx_rate_idx < 0))
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx];
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw,
+			   const struct ieee80211_tx_info *c)
+{
+	if (c->control.rts_cts_rate_idx < 0)
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx];
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
+			     const struct ieee80211_tx_info *c)
+{
+	if (c->control.alt_retry_rate_idx < 0)
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.alt_retry_rate_idx];
+}
+
 /**
  * DOC: Hardware crypto acceleration
  *
@@ -979,8 +1041,10 @@ enum ieee80211_ampdu_mlme_action {
  * @tx: Handler that 802.11 module calls for each transmitted frame.
  *	skb contains the buffer starting from the IEEE 802.11 header.
  *	The low-level driver should send the frame out based on
- *	configuration in the TX control data. Must be implemented and
- *	atomic.
+ *	configuration in the TX control data. This handler should,
+ *	preferably, never fail and stop queues appropriately, more
+ *	importantly, however, it must never fail for A-MPDU-queues.
+ *	Must be implemented and atomic.
  *
  * @start: Called before the first netdevice attached to the hardware
  *	is enabled. This should turn on the hardware and must turn on
@@ -1072,15 +1136,13 @@ enum ieee80211_ampdu_mlme_action {
  *	of assocaited station or AP.
  *
  * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
- *	bursting) for a hardware TX queue. The @queue parameter uses the
- *	%IEEE80211_TX_QUEUE_* constants. Must be atomic.
+ *	bursting) for a hardware TX queue. Must be atomic.
  *
  * @get_tx_stats: Get statistics of the current TX queue status. This is used
  *	to get number of currently queued packets (queue length), maximum queue
  *	size (limit), and total number of packets sent using each TX queue
- *	(count). This information is used for WMM to find out which TX
- *	queues have room for more packets and by hostapd to provide
- *	statistics about the current queueing state to external programs.
+ *	(count). The 'stats' pointer points to an array that has hw->queues +
+ *	hw->ampdu_queues items.
  *
  * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
  *	this is only used for IBSS mode debugging and, as such, is not a
@@ -1091,17 +1153,6 @@ enum ieee80211_ampdu_mlme_action {
  *	function is optional if the firmware/hardware takes full care of
  *	TSF synchronization.
  *
- * @beacon_update: Setup beacon data for IBSS beacons. Unlike access point,
- *	IBSS uses a fixed beacon frame which is configured using this
- *	function.
- *	If the driver returns success (0) from this callback, it owns
- *	the skb. That means the driver is responsible to kfree_skb() it.
- *	The control structure is not dynamically allocated. That means the
- *	driver does not own the pointer and if it needs it somewhere
- *	outside of the context of this function, it must copy it
- *	somewhere else.
- *	This handler is required only for IBSS mode.
- *
  * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
  *	This is needed only for IBSS mode and the result of this function is
  *	used to determine whether to reply to Probe Requests.
@@ -1116,8 +1167,7 @@ enum ieee80211_ampdu_mlme_action {
  * 	that TX/RX_STOP can pass NULL for this parameter.
  */
 struct ieee80211_ops {
-	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
-		  struct ieee80211_tx_control *control);
+	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
 	int (*start)(struct ieee80211_hw *hw);
 	void (*stop)(struct ieee80211_hw *hw);
 	int (*add_interface)(struct ieee80211_hw *hw,
@@ -1154,15 +1204,12 @@ struct ieee80211_ops {
 			       u32 short_retry, u32 long_retr);
 	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			enum sta_notify_cmd, const u8 *addr);
-	int (*conf_tx)(struct ieee80211_hw *hw, int queue,
+	int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
 		       const struct ieee80211_tx_queue_params *params);
 	int (*get_tx_stats)(struct ieee80211_hw *hw,
 			    struct ieee80211_tx_queue_stats *stats);
 	u64 (*get_tsf)(struct ieee80211_hw *hw);
 	void (*reset_tsf)(struct ieee80211_hw *hw);
-	int (*beacon_update)(struct ieee80211_hw *hw,
-			     struct sk_buff *skb,
-			     struct ieee80211_tx_control *control);
 	int (*tx_last_beacon)(struct ieee80211_hw *hw);
 	int (*ampdu_action)(struct ieee80211_hw *hw,
 			    enum ieee80211_ampdu_mlme_action action,
@@ -1292,7 +1339,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw);
  *
  * This function frees everything that was allocated, including the
  * private data for the driver. You must call ieee80211_unregister_hw()
- * before calling this function
+ * before calling this function.
  *
  * @hw: the hardware to free
  */
@@ -1358,16 +1405,12 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw,
  *
  * @hw: the hardware the frame was transmitted by
  * @skb: the frame that was transmitted, owned by mac80211 after this call
- * @status: status information for this frame; the status pointer need not
- *	be valid after this function returns and is not freed by mac80211,
- *	it is recommended that it points to a stack area
  */
 void ieee80211_tx_status(struct ieee80211_hw *hw,
-			 struct sk_buff *skb,
-			 struct ieee80211_tx_status *status);
+			 struct sk_buff *skb);
 
 /**
- * ieee80211_tx_status_irqsafe - irq-safe transmit status callback
+ * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback
  *
  * Like ieee80211_tx_status() but can be called in IRQ context
  * (internally defers to a tasklet.)
@@ -1377,13 +1420,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw,
  *
  * @hw: the hardware the frame was transmitted by
  * @skb: the frame that was transmitted, owned by mac80211 after this call
- * @status: status information for this frame; the status pointer need not
- *	be valid after this function returns and is not freed by mac80211,
- *	it is recommended that it points to a stack area
  */
 void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
-				 struct sk_buff *skb,
-				 struct ieee80211_tx_status *status);
+				 struct sk_buff *skb);
 
 /**
  * ieee80211_beacon_get - beacon generation function
@@ -1399,8 +1438,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
  * is responsible of freeing it.
  */
 struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_tx_control *control);
+				     struct ieee80211_vif *vif);
 
 /**
  * ieee80211_rts_get - RTS frame generation function
@@ -1408,7 +1446,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
  * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
  * @frame: pointer to the frame that is going to be protected by the RTS.
  * @frame_len: the frame length (in octets).
- * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
  * @rts: The buffer where to store the RTS frame.
  *
  * If the RTS frames are generated by the host system (i.e., not in
@@ -1418,7 +1456,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
  */
 void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       const void *frame, size_t frame_len,
-		       const struct ieee80211_tx_control *frame_txctl,
+		       const struct ieee80211_tx_info *frame_txctl,
 		       struct ieee80211_rts *rts);
 
 /**
@@ -1426,7 +1464,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
  * @frame_len: the length of the frame that is going to be protected by the RTS.
- * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
  *
  * If the RTS is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
@@ -1434,7 +1472,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  */
 __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif, size_t frame_len,
-			      const struct ieee80211_tx_control *frame_txctl);
+			      const struct ieee80211_tx_info *frame_txctl);
 
 /**
  * ieee80211_ctstoself_get - CTS-to-self frame generation function
@@ -1442,7 +1480,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
  * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
  * @frame: pointer to the frame that is going to be protected by the CTS-to-self.
  * @frame_len: the frame length (in octets).
- * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
  * @cts: The buffer where to store the CTS-to-self frame.
  *
  * If the CTS-to-self frames are generated by the host system (i.e., not in
@@ -1453,7 +1491,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
 void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
 			     struct ieee80211_vif *vif,
 			     const void *frame, size_t frame_len,
-			     const struct ieee80211_tx_control *frame_txctl,
+			     const struct ieee80211_tx_info *frame_txctl,
 			     struct ieee80211_cts *cts);
 
 /**
@@ -1461,7 +1499,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
  * @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
- * @frame_txctl: &struct ieee80211_tx_control of the frame.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
  *
  * If the CTS-to-self is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
@@ -1470,7 +1508,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
 __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
 				    struct ieee80211_vif *vif,
 				    size_t frame_len,
-				    const struct ieee80211_tx_control *frame_txctl);
+				    const struct ieee80211_tx_info *frame_txctl);
 
 /**
  * ieee80211_generic_frame_duration - Calculate the duration field for a frame
@@ -1509,8 +1547,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
  * use common code for all beacons.
  */
 struct sk_buff *
-ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			  struct ieee80211_tx_control *control);
+ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 
 /**
  * ieee80211_get_hdrlen_from_skb - get header length from data
@@ -1522,7 +1559,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  *
  * @skb: the frame
  */
-int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
 
 /**
  * ieee80211_get_hdrlen - get header length from frame control
@@ -1535,6 +1572,12 @@ int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
 int ieee80211_get_hdrlen(u16 fc);
 
 /**
+ * ieee80211_hdrlen - get header length in bytes from frame control
+ * @fc: frame control field in little-endian format
+ */
+unsigned int ieee80211_hdrlen(__le16 fc);
+
+/**
  * ieee80211_get_tkip_key - get a TKIP rc4 for skb
  *
  * This function computes a TKIP rc4 key for an skb. It computes
@@ -1545,6 +1588,8 @@ int ieee80211_get_hdrlen(u16 fc);
  * @keyconf: the parameter passed with the set key
  * @skb: the skb for which the key is needed
  * @rc4key: a buffer to which the key will be written
+ * @type: TBD
+ * @key: TBD
  */
 void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf,
 				struct sk_buff *skb,
@@ -1568,14 +1613,6 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
 void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
 
 /**
- * ieee80211_start_queues - start all queues
- * @hw: pointer to as obtained from ieee80211_alloc_hw().
- *
- * Drivers should use this function instead of netif_start_queue.
- */
-void ieee80211_start_queues(struct ieee80211_hw *hw);
-
-/**
  * ieee80211_stop_queues - stop all queues
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  *
@@ -1603,7 +1640,7 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
 void ieee80211_scan_completed(struct ieee80211_hw *hw);
 
 /**
- * ieee80211_iterate_active_interfaces- iterate active interfaces
+ * ieee80211_iterate_active_interfaces - iterate active interfaces
  *
  * This function iterates over the interfaces associated with a given
  * hardware that are currently active and calls the callback for them.
@@ -1670,7 +1707,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid);
  *
  * This function must be called by low level driver once it has
  * finished with preparations for the BA session.
- * This version of the function is irq safe.
+ * This version of the function is IRQ-safe.
  */
 void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
 				      u16 tid);
@@ -1710,7 +1747,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid);
  *
  * This function must be called by low level driver once it has
  * finished with preparations for the BA session tear down.
- * This version of the function is irq safe.
+ * This version of the function is IRQ-safe.
  */
 void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
 				     u16 tid);
@@ -1718,7 +1755,7 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
 /**
  * ieee80211_notify_mac - low level driver notification
  * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @notification_types: enum ieee80211_notification_types
+ * @notif_type: enum ieee80211_notification_types
  *
  * This function must be called by low level driver to inform mac80211 of
  * low level driver status change or force mac80211 to re-assoc for low
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index dc420fecafb9..aa4b708654a4 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -75,7 +75,7 @@ struct neigh_statistics
 	unsigned long destroys;		/* number of destroyed neighs */
 	unsigned long hash_grows;	/* number of hash resizes */
 
-	unsigned long res_failed;	/* nomber of failed resolutions */
+	unsigned long res_failed;	/* number of failed resolutions */
 
 	unsigned long lookups;		/* number of lookups */
 	unsigned long hits;		/* number of hits (among lookups) */
@@ -85,6 +85,8 @@ struct neigh_statistics
 
 	unsigned long periodic_gc_runs;	/* number of periodic GC runs */
 	unsigned long forced_gc_runs;	/* number of forced GC runs */
+
+	unsigned long unres_discards;	/* number of unresolved drops */
 };
 
 #define NEIGH_CACHE_STAT_INC(tbl, field)				\
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index d9dd0f707296..a8eb43cf0c7e 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -9,6 +9,7 @@
 #include <linux/list.h>
 
 #include <net/netns/core.h>
+#include <net/netns/mib.h>
 #include <net/netns/unix.h>
 #include <net/netns/packet.h>
 #include <net/netns/ipv4.h>
@@ -37,7 +38,9 @@ struct net {
 	struct proc_dir_entry 	*proc_net;
 	struct proc_dir_entry 	*proc_net_stat;
 
-	struct list_head	sysctl_table_headers;
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_set	sysctls;
+#endif
 
 	struct net_device       *loopback_dev;          /* The loopback */
 
@@ -52,6 +55,7 @@ struct net {
 	struct sock 		*rtnl;			/* rtnetlink socket */
 
 	struct netns_core	core;
+	struct netns_mib	mib;
 	struct netns_packet	packet;
 	struct netns_unix	unx;
 	struct netns_ipv4	ipv4;
@@ -212,8 +216,11 @@ extern void unregister_pernet_gen_device(int id, struct pernet_operations *);
 struct ctl_path;
 struct ctl_table;
 struct ctl_table_header;
+
 extern struct ctl_table_header *register_net_sysctl_table(struct net *net,
 	const struct ctl_path *path, struct ctl_table *table);
+extern struct ctl_table_header *register_net_sysctl_rotable(
+	const struct ctl_path *path, struct ctl_table *table);
 extern void unregister_net_sysctl_table(struct ctl_table_header *header);
 
 #endif /* __NET_NET_NAMESPACE_H */
diff --git a/include/net/netfilter/ipv4/nf_conntrack_ipv4.h b/include/net/netfilter/ipv4/nf_conntrack_ipv4.h
index 9bf059817aec..7573d52a4346 100644
--- a/include/net/netfilter/ipv4/nf_conntrack_ipv4.h
+++ b/include/net/netfilter/ipv4/nf_conntrack_ipv4.h
@@ -9,8 +9,6 @@
 #ifndef _NF_CONNTRACK_IPV4_H
 #define _NF_CONNTRACK_IPV4_H
 
-/* Returns new sk_buff, or NULL */
-struct sk_buff *nf_ct_ipv4_ct_gather_frags(struct sk_buff *skb);
 
 extern struct nf_conntrack_l3proto nf_conntrack_l3proto_ipv4;
 
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 2dbd6c015b94..0741ad592da0 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -88,7 +88,6 @@ struct nf_conn_help {
 	u8 expecting[NF_CT_MAX_EXPECT_CLASSES];
 };
 
-
 #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
 #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
 
@@ -111,11 +110,6 @@ struct nf_conn
 	/* Timer function; drops refcnt when it goes off. */
 	struct timer_list timeout;
 
-#ifdef CONFIG_NF_CT_ACCT
-	/* Accounting Information (same cache line as other written members) */
-	struct ip_conntrack_counter counters[IP_CT_DIR_MAX];
-#endif
-
 #if defined(CONFIG_NF_CONNTRACK_MARK)
 	u_int32_t mark;
 #endif
@@ -223,6 +217,25 @@ static inline void nf_ct_refresh(struct nf_conn *ct,
 	__nf_ct_refresh_acct(ct, 0, skb, extra_jiffies, 0);
 }
 
+extern bool __nf_ct_kill_acct(struct nf_conn *ct,
+			      enum ip_conntrack_info ctinfo,
+			      const struct sk_buff *skb,
+			      int do_acct);
+
+/* kill conntrack and do accounting */
+static inline bool nf_ct_kill_acct(struct nf_conn *ct,
+				   enum ip_conntrack_info ctinfo,
+				   const struct sk_buff *skb)
+{
+	return __nf_ct_kill_acct(ct, ctinfo, skb, 1);
+}
+
+/* kill conntrack without accounting */
+static inline bool nf_ct_kill(struct nf_conn *ct)
+{
+	return __nf_ct_kill_acct(ct, 0, NULL, 0);
+}
+
 /* These are for NAT.  Icky. */
 /* Update TCP window tracking data when NAT mangles the packet */
 extern void nf_conntrack_tcp_update(const struct sk_buff *skb,
@@ -239,7 +252,8 @@ nf_ct_iterate_cleanup(int (*iter)(struct nf_conn *i, void *data), void *data);
 extern void nf_conntrack_free(struct nf_conn *ct);
 extern struct nf_conn *
 nf_conntrack_alloc(const struct nf_conntrack_tuple *orig,
-		   const struct nf_conntrack_tuple *repl);
+		   const struct nf_conntrack_tuple *repl,
+		   gfp_t gfp);
 
 /* It's confirmed if it is, or has been in the hash table. */
 static inline int nf_ct_is_confirmed(struct nf_conn *ct)
diff --git a/include/net/netfilter/nf_conntrack_acct.h b/include/net/netfilter/nf_conntrack_acct.h
new file mode 100644
index 000000000000..5d5ae55d54c4
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_acct.h
@@ -0,0 +1,51 @@
+/*
+ * (C) 2008 Krzysztof Piotr Oledzki <ole@ans.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _NF_CONNTRACK_ACCT_H
+#define _NF_CONNTRACK_ACCT_H
+#include <linux/netfilter/nf_conntrack_common.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+struct nf_conn_counter {
+	u_int64_t packets;
+	u_int64_t bytes;
+};
+
+extern int nf_ct_acct;
+
+static inline
+struct nf_conn_counter *nf_conn_acct_find(const struct nf_conn *ct)
+{
+	return nf_ct_ext_find(ct, NF_CT_EXT_ACCT);
+}
+
+static inline
+struct nf_conn_counter *nf_ct_acct_ext_add(struct nf_conn *ct, gfp_t gfp)
+{
+	struct nf_conn_counter *acct;
+
+	if (!nf_ct_acct)
+		return NULL;
+
+	acct = nf_ct_ext_add(ct, NF_CT_EXT_ACCT, gfp);
+	if (!acct)
+		pr_debug("failed to add accounting extension area");
+
+
+	return acct;
+};
+
+extern unsigned int
+seq_print_acct(struct seq_file *s, const struct nf_conn *ct, int dir);
+
+extern int nf_conntrack_acct_init(void);
+extern void nf_conntrack_acct_fini(void);
+
+#endif /* _NF_CONNTRACK_ACCT_H */
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
index f80c0ed6d870..da8ee52613a5 100644
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -7,11 +7,13 @@ enum nf_ct_ext_id
 {
 	NF_CT_EXT_HELPER,
 	NF_CT_EXT_NAT,
+	NF_CT_EXT_ACCT,
 	NF_CT_EXT_NUM,
 };
 
 #define NF_CT_EXT_HELPER_TYPE struct nf_conn_help
 #define NF_CT_EXT_NAT_TYPE struct nf_conn_nat
+#define NF_CT_EXT_ACCT_TYPE struct nf_conn_counter
 
 /* Extensions: optional stuff which isn't permanently in struct. */
 struct nf_ct_ext {
diff --git a/include/net/netlink.h b/include/net/netlink.h
index dfc3701dfcc3..18024b8cecb8 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -896,6 +896,9 @@ static inline int nla_put_msecs(struct sk_buff *skb, int attrtype,
 #define NLA_PUT_U64(skb, attrtype, value) \
 	NLA_PUT_TYPE(skb, u64, attrtype, value)
 
+#define NLA_PUT_BE64(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, __be64, attrtype, value)
+
 #define NLA_PUT_STRING(skb, attrtype, value) \
 	NLA_PUT(skb, attrtype, strlen(value) + 1, value)
 
diff --git a/include/net/netns/hash.h b/include/net/netns/hash.h
new file mode 100644
index 000000000000..548d78f2cc47
--- /dev/null
+++ b/include/net/netns/hash.h
@@ -0,0 +1,21 @@
+#ifndef __NET_NS_HASH_H__
+#define __NET_NS_HASH_H__
+
+#include <asm/cache.h>
+
+struct net;
+
+static inline unsigned net_hash_mix(struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	/*
+	 * shift this right to eliminate bits, that are
+	 * always zeroed
+	 */
+
+	return (unsigned)(((unsigned long)net) >> L1_CACHE_SHIFT);
+#else
+	return 0;
+#endif
+}
+#endif
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 34ee348a2cf2..a6ed83853dcc 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -18,6 +18,7 @@ struct netns_ipv4 {
 	struct ctl_table_header	*forw_hdr;
 	struct ctl_table_header	*frags_hdr;
 	struct ctl_table_header	*ipv4_hdr;
+	struct ctl_table_header *route_hdr;
 #endif
 	struct ipv4_devconf	*devconf_all;
 	struct ipv4_devconf	*devconf_dflt;
@@ -36,6 +37,7 @@ struct netns_ipv4 {
 	struct xt_table		*iptable_mangle;
 	struct xt_table		*iptable_raw;
 	struct xt_table		*arptable_filter;
+	struct xt_table		*iptable_security;
 #endif
 
 	int sysctl_icmp_echo_ignore_all;
@@ -44,5 +46,8 @@ struct netns_ipv4 {
 	int sysctl_icmp_ratelimit;
 	int sysctl_icmp_ratemask;
 	int sysctl_icmp_errors_use_inbound_ifaddr;
+
+	struct timer_list rt_secret_timer;
+	atomic_t rt_genid;
 };
 #endif
diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
index ac053be6c256..2932721180c0 100644
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
@@ -35,10 +35,11 @@ struct netns_ipv6 {
 	struct xt_table		*ip6table_filter;
 	struct xt_table		*ip6table_mangle;
 	struct xt_table		*ip6table_raw;
+	struct xt_table		*ip6table_security;
 #endif
 	struct rt6_info         *ip6_null_entry;
 	struct rt6_statistics   *rt6_stats;
-	struct timer_list       *ip6_fib_timer;
+	struct timer_list       ip6_fib_timer;
 	struct hlist_head       *fib_table_hash;
 	struct fib6_table       *fib6_main_tbl;
 	struct dst_ops		*ip6_dst_ops;
diff --git a/include/net/netns/mib.h b/include/net/netns/mib.h
new file mode 100644
index 000000000000..449147604642
--- /dev/null
+++ b/include/net/netns/mib.h
@@ -0,0 +1,16 @@
+#ifndef __NETNS_MIB_H__
+#define __NETNS_MIB_H__
+
+#include <net/snmp.h>
+
+struct netns_mib {
+	DEFINE_SNMP_STAT(struct tcp_mib, tcp_statistics);
+	DEFINE_SNMP_STAT(struct ipstats_mib, ip_statistics);
+	DEFINE_SNMP_STAT(struct linux_mib, net_statistics);
+	DEFINE_SNMP_STAT(struct udp_mib, udp_statistics);
+	DEFINE_SNMP_STAT(struct udp_mib, udplite_statistics);
+	DEFINE_SNMP_STAT(struct icmp_mib, icmp_statistics);
+	DEFINE_SNMP_STAT(struct icmpmsg_mib, icmpmsg_statistics);
+};
+
+#endif
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 46fb4d80c74a..6affcfaa123e 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -72,6 +72,10 @@ extern void qdisc_watchdog_cancel(struct qdisc_watchdog *wd);
 extern struct Qdisc_ops pfifo_qdisc_ops;
 extern struct Qdisc_ops bfifo_qdisc_ops;
 
+extern int fifo_set_limit(struct Qdisc *q, unsigned int limit);
+extern struct Qdisc *fifo_create_dflt(struct Qdisc *sch, struct Qdisc_ops *ops,
+				      unsigned int limit);
+
 extern int register_qdisc(struct Qdisc_ops *qops);
 extern int unregister_qdisc(struct Qdisc_ops *qops);
 extern struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle);
@@ -79,14 +83,14 @@ extern struct Qdisc *qdisc_lookup_class(struct net_device *dev, u32 handle);
 extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
 		struct nlattr *tab);
 extern void qdisc_put_rtab(struct qdisc_rate_table *tab);
+extern void qdisc_put_stab(struct qdisc_size_table *tab);
 
-extern void __qdisc_run(struct net_device *dev);
+extern void __qdisc_run(struct Qdisc *q);
 
-static inline void qdisc_run(struct net_device *dev)
+static inline void qdisc_run(struct Qdisc *q)
 {
-	if (!netif_queue_stopped(dev) &&
-	    !test_and_set_bit(__LINK_STATE_QDISC_RUNNING, &dev->state))
-		__qdisc_run(dev);
+	if (!test_and_set_bit(__QDISC_STATE_RUNNING, &q->state))
+		__qdisc_run(q);
 }
 
 extern int tc_classify_compat(struct sk_buff *skb, struct tcf_proto *tp,
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index 0c96e7bed5db..cac811e51f6d 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <linux/bug.h>
 
 #include <net/sock.h>
 
@@ -32,7 +33,7 @@ struct request_sock_ops {
 	struct kmem_cache	*slab;
 	int		(*rtx_syn_ack)(struct sock *sk,
 				       struct request_sock *req);
-	void		(*send_ack)(struct sk_buff *skb,
+	void		(*send_ack)(struct sock *sk, struct sk_buff *skb,
 				    struct request_sock *req);
 	void		(*send_reset)(struct sock *sk,
 				      struct sk_buff *skb);
@@ -170,7 +171,7 @@ static inline struct request_sock *reqsk_queue_remove(struct request_sock_queue
 {
 	struct request_sock *req = queue->rskq_accept_head;
 
-	BUG_TRAP(req != NULL);
+	WARN_ON(req == NULL);
 
 	queue->rskq_accept_head = req->dl_next;
 	if (queue->rskq_accept_head == NULL)
@@ -185,7 +186,7 @@ static inline struct sock *reqsk_queue_get_child(struct request_sock_queue *queu
 	struct request_sock *req = reqsk_queue_remove(queue);
 	struct sock *child = req->sk;
 
-	BUG_TRAP(child != NULL);
+	WARN_ON(child == NULL);
 
 	sk_acceptq_removed(parent);
 	__reqsk_free(req);
diff --git a/include/net/rose.h b/include/net/rose.h
index e5bb084d8754..cbd5364b2c8a 100644
--- a/include/net/rose.h
+++ b/include/net/rose.h
@@ -201,7 +201,7 @@ extern void rose_link_device_down(struct net_device *);
 extern struct net_device *rose_dev_first(void);
 extern struct net_device *rose_dev_get(rose_address *);
 extern struct rose_route *rose_route_free_lci(unsigned int, struct rose_neigh *);
-extern struct rose_neigh *rose_get_neigh(rose_address *, unsigned char *, unsigned char *);
+extern struct rose_neigh *rose_get_neigh(rose_address *, unsigned char *, unsigned char *, int);
 extern int  rose_rt_ioctl(unsigned int, void __user *);
 extern void rose_link_failed(ax25_cb *, int);
 extern int  rose_route_frame(struct sk_buff *, ax25_cb *);
diff --git a/include/net/route.h b/include/net/route.h
index fc836ff824cc..4f0d8c14736c 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -111,7 +111,7 @@ struct in_device;
 extern int		ip_rt_init(void);
 extern void		ip_rt_redirect(__be32 old_gw, __be32 dst, __be32 new_gw,
 				       __be32 src, struct net_device *dev);
-extern void		rt_cache_flush(int how);
+extern void		rt_cache_flush(struct net *net, int how);
 extern int		__ip_route_output_key(struct net *, struct rtable **, const struct flowi *flp);
 extern int		ip_route_output_key(struct net *, struct rtable **, struct flowi *flp);
 extern int		ip_route_output_flow(struct net *, struct rtable **rp, struct flowi *flp, struct sock *sk, int flags);
@@ -204,6 +204,4 @@ static inline struct inet_peer *rt_get_peer(struct rtable *rt)
 	return rt->peer;
 }
 
-extern ctl_table ipv4_route_table[];
-
 #endif	/* _ROUTE_H */
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index a87fc0312edc..a7abfda3e447 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -23,6 +23,19 @@ struct qdisc_rate_table
 	int		refcnt;
 };
 
+enum qdisc_state_t
+{
+	__QDISC_STATE_RUNNING,
+	__QDISC_STATE_SCHED,
+};
+
+struct qdisc_size_table {
+	struct list_head	list;
+	struct tc_sizespec	szopts;
+	int			refcnt;
+	u16			data[];
+};
+
 struct Qdisc
 {
 	int 			(*enqueue)(struct sk_buff *skb, struct Qdisc *dev);
@@ -33,21 +46,26 @@ struct Qdisc
 #define TCQ_F_INGRESS	4
 	int			padded;
 	struct Qdisc_ops	*ops;
+	struct qdisc_size_table	*stab;
 	u32			handle;
 	u32			parent;
 	atomic_t		refcnt;
+	unsigned long		state;
+	struct sk_buff		*gso_skb;
 	struct sk_buff_head	q;
-	struct net_device	*dev;
+	struct netdev_queue	*dev_queue;
+	struct Qdisc		*next_sched;
 	struct list_head	list;
 
 	struct gnet_stats_basic	bstats;
 	struct gnet_stats_queue	qstats;
 	struct gnet_stats_rate_est	rate_est;
-	spinlock_t		*stats_lock;
 	struct rcu_head 	q_rcu;
 	int			(*reshape_fail)(struct sk_buff *skb,
 					struct Qdisc *q);
 
+	void			*u32_node;
+
 	/* This field is deprecated, but it is still used by CBQ
 	 * and it will live until better solution will be invented.
 	 */
@@ -155,18 +173,108 @@ struct tcf_proto
 	struct tcf_proto_ops	*ops;
 };
 
+struct qdisc_skb_cb {
+	unsigned int		pkt_len;
+	char			data[];
+};
+
+static inline struct qdisc_skb_cb *qdisc_skb_cb(struct sk_buff *skb)
+{
+	return (struct qdisc_skb_cb *)skb->cb;
+}
+
+static inline spinlock_t *qdisc_lock(struct Qdisc *qdisc)
+{
+	return &qdisc->q.lock;
+}
+
+static inline struct Qdisc *qdisc_root(struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->qdisc;
+}
+
+/* The qdisc root lock is a mechanism by which to top level
+ * of a qdisc tree can be locked from any qdisc node in the
+ * forest.  This allows changing the configuration of some
+ * aspect of the qdisc tree while blocking out asynchronous
+ * qdisc access in the packet processing paths.
+ *
+ * It is only legal to do this when the root will not change
+ * on us.  Otherwise we'll potentially lock the wrong qdisc
+ * root.  This is enforced by holding the RTNL semaphore, which
+ * all users of this lock accessor must do.
+ */
+static inline spinlock_t *qdisc_root_lock(struct Qdisc *qdisc)
+{
+	struct Qdisc *root = qdisc_root(qdisc);
+
+	ASSERT_RTNL();
+	return qdisc_lock(root);
+}
+
+static inline struct net_device *qdisc_dev(struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->dev;
+}
 
-extern void qdisc_lock_tree(struct net_device *dev);
-extern void qdisc_unlock_tree(struct net_device *dev);
+static inline void sch_tree_lock(struct Qdisc *q)
+{
+	spin_lock_bh(qdisc_root_lock(q));
+}
 
-#define sch_tree_lock(q)	qdisc_lock_tree((q)->dev)
-#define sch_tree_unlock(q)	qdisc_unlock_tree((q)->dev)
-#define tcf_tree_lock(tp)	qdisc_lock_tree((tp)->q->dev)
-#define tcf_tree_unlock(tp)	qdisc_unlock_tree((tp)->q->dev)
+static inline void sch_tree_unlock(struct Qdisc *q)
+{
+	spin_unlock_bh(qdisc_root_lock(q));
+}
+
+#define tcf_tree_lock(tp)	sch_tree_lock((tp)->q)
+#define tcf_tree_unlock(tp)	sch_tree_unlock((tp)->q)
 
 extern struct Qdisc noop_qdisc;
 extern struct Qdisc_ops noop_qdisc_ops;
 
+struct Qdisc_class_common
+{
+	u32			classid;
+	struct hlist_node	hnode;
+};
+
+struct Qdisc_class_hash
+{
+	struct hlist_head	*hash;
+	unsigned int		hashsize;
+	unsigned int		hashmask;
+	unsigned int		hashelems;
+};
+
+static inline unsigned int qdisc_class_hash(u32 id, u32 mask)
+{
+	id ^= id >> 8;
+	id ^= id >> 4;
+	return id & mask;
+}
+
+static inline struct Qdisc_class_common *
+qdisc_class_find(struct Qdisc_class_hash *hash, u32 id)
+{
+	struct Qdisc_class_common *cl;
+	struct hlist_node *n;
+	unsigned int h;
+
+	h = qdisc_class_hash(id, hash->hashmask);
+	hlist_for_each_entry(cl, n, &hash->hash[h], hnode) {
+		if (cl->classid == id)
+			return cl;
+	}
+	return NULL;
+}
+
+extern int qdisc_class_hash_init(struct Qdisc_class_hash *);
+extern void qdisc_class_hash_insert(struct Qdisc_class_hash *, struct Qdisc_class_common *);
+extern void qdisc_class_hash_remove(struct Qdisc_class_hash *, struct Qdisc_class_common *);
+extern void qdisc_class_hash_grow(struct Qdisc *, struct Qdisc_class_hash *);
+extern void qdisc_class_hash_destroy(struct Qdisc_class_hash *);
+
 extern void dev_init_scheduler(struct net_device *dev);
 extern void dev_shutdown(struct net_device *dev);
 extern void dev_activate(struct net_device *dev);
@@ -174,18 +282,100 @@ extern void dev_deactivate(struct net_device *dev);
 extern void qdisc_reset(struct Qdisc *qdisc);
 extern void qdisc_destroy(struct Qdisc *qdisc);
 extern void qdisc_tree_decrease_qlen(struct Qdisc *qdisc, unsigned int n);
-extern struct Qdisc *qdisc_alloc(struct net_device *dev, struct Qdisc_ops *ops);
+extern struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue,
+				 struct Qdisc_ops *ops);
 extern struct Qdisc *qdisc_create_dflt(struct net_device *dev,
+				       struct netdev_queue *dev_queue,
 				       struct Qdisc_ops *ops, u32 parentid);
+extern void qdisc_calculate_pkt_len(struct sk_buff *skb,
+				   struct qdisc_size_table *stab);
 extern void tcf_destroy(struct tcf_proto *tp);
 extern void tcf_destroy_chain(struct tcf_proto **fl);
 
+/* Reset all TX qdiscs of a device.  */
+static inline void qdisc_reset_all_tx(struct net_device *dev)
+{
+	unsigned int i;
+	for (i = 0; i < dev->num_tx_queues; i++)
+		qdisc_reset(netdev_get_tx_queue(dev, i)->qdisc);
+}
+
+/* Are all TX queues of the device empty?  */
+static inline bool qdisc_all_tx_empty(const struct net_device *dev)
+{
+	unsigned int i;
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		const struct Qdisc *q = txq->qdisc;
+
+		if (q->q.qlen)
+			return false;
+	}
+	return true;
+}
+
+/* Are any of the TX qdiscs changing?  */
+static inline bool qdisc_tx_changing(struct net_device *dev)
+{
+	unsigned int i;
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		if (txq->qdisc != txq->qdisc_sleeping)
+			return true;
+	}
+	return false;
+}
+
+/* Is the device using the noop qdisc on all queues?  */
+static inline bool qdisc_tx_is_noop(const struct net_device *dev)
+{
+	unsigned int i;
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		if (txq->qdisc != &noop_qdisc)
+			return false;
+	}
+	return true;
+}
+
+static inline unsigned int qdisc_pkt_len(struct sk_buff *skb)
+{
+	return qdisc_skb_cb(skb)->pkt_len;
+}
+
+/* additional qdisc xmit flags (NET_XMIT_MASK in linux/netdevice.h) */
+enum net_xmit_qdisc_t {
+	__NET_XMIT_STOLEN = 0x00010000,
+	__NET_XMIT_BYPASS = 0x00020000,
+};
+
+#ifdef CONFIG_NET_CLS_ACT
+#define net_xmit_drop_count(e)	((e) & __NET_XMIT_STOLEN ? 0 : 1)
+#else
+#define net_xmit_drop_count(e)	(1)
+#endif
+
+static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
+{
+#ifdef CONFIG_NET_SCHED
+	if (sch->stab)
+		qdisc_calculate_pkt_len(skb, sch->stab);
+#endif
+	return sch->enqueue(skb, sch);
+}
+
+static inline int qdisc_enqueue_root(struct sk_buff *skb, struct Qdisc *sch)
+{
+	qdisc_skb_cb(skb)->pkt_len = skb->len;
+	return qdisc_enqueue(skb, sch) & NET_XMIT_MASK;
+}
+
 static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
 				       struct sk_buff_head *list)
 {
 	__skb_queue_tail(list, skb);
-	sch->qstats.backlog += skb->len;
-	sch->bstats.bytes += skb->len;
+	sch->qstats.backlog += qdisc_pkt_len(skb);
+	sch->bstats.bytes += qdisc_pkt_len(skb);
 	sch->bstats.packets++;
 
 	return NET_XMIT_SUCCESS;
@@ -202,7 +392,7 @@ static inline struct sk_buff *__qdisc_dequeue_head(struct Qdisc *sch,
 	struct sk_buff *skb = __skb_dequeue(list);
 
 	if (likely(skb != NULL))
-		sch->qstats.backlog -= skb->len;
+		sch->qstats.backlog -= qdisc_pkt_len(skb);
 
 	return skb;
 }
@@ -218,7 +408,7 @@ static inline struct sk_buff *__qdisc_dequeue_tail(struct Qdisc *sch,
 	struct sk_buff *skb = __skb_dequeue_tail(list);
 
 	if (likely(skb != NULL))
-		sch->qstats.backlog -= skb->len;
+		sch->qstats.backlog -= qdisc_pkt_len(skb);
 
 	return skb;
 }
@@ -232,7 +422,7 @@ static inline int __qdisc_requeue(struct sk_buff *skb, struct Qdisc *sch,
 				  struct sk_buff_head *list)
 {
 	__skb_queue_head(list, skb);
-	sch->qstats.backlog += skb->len;
+	sch->qstats.backlog += qdisc_pkt_len(skb);
 	sch->qstats.requeues++;
 
 	return NET_XMIT_SUCCESS;
@@ -250,7 +440,7 @@ static inline void __qdisc_reset_queue(struct Qdisc *sch,
 	 * We do not know the backlog in bytes of this list, it
 	 * is up to the caller to correct it
 	 */
-	skb_queue_purge(list);
+	__skb_queue_purge(list);
 }
 
 static inline void qdisc_reset_queue(struct Qdisc *sch)
@@ -265,7 +455,7 @@ static inline unsigned int __qdisc_queue_drop(struct Qdisc *sch,
 	struct sk_buff *skb = __qdisc_dequeue_tail(sch, list);
 
 	if (likely(skb != NULL)) {
-		unsigned int len = skb->len;
+		unsigned int len = qdisc_pkt_len(skb);
 		kfree_skb(skb);
 		return len;
 	}
diff --git a/include/net/sctp/checksum.h b/include/net/sctp/checksum.h
index ba75c67cb992..b799fb21519a 100644
--- a/include/net/sctp/checksum.h
+++ b/include/net/sctp/checksum.h
@@ -46,9 +46,14 @@
 #include <net/sctp/sctp.h>
 #include <linux/crc32c.h>
 
-static inline __u32 sctp_start_cksum(__u8 *buffer, __u16 length)
+static inline __be32 sctp_crc32c(__be32 crc, u8 *buffer, u16 length)
 {
-	__u32 crc = ~(__u32) 0;
+	return (__force __be32)crc32c((__force u32)crc, buffer, length);
+}
+
+static inline __be32 sctp_start_cksum(__u8 *buffer, __u16 length)
+{
+	__be32 crc = ~cpu_to_be32(0);
 	__u8  zero[sizeof(__u32)] = {0};
 
 	/* Optimize this routine to be SCTP specific, knowing how
@@ -56,23 +61,23 @@ static inline __u32 sctp_start_cksum(__u8 *buffer, __u16 length)
 	 */
 
 	/* Calculate CRC up to the checksum. */
-	crc = crc32c(crc, buffer, sizeof(struct sctphdr) - sizeof(__u32));
+	crc = sctp_crc32c(crc, buffer, sizeof(struct sctphdr) - sizeof(__u32));
 
 	/* Skip checksum field of the header. */
-	crc = crc32c(crc, zero, sizeof(__u32));
+	crc = sctp_crc32c(crc, zero, sizeof(__u32));
 
 	/* Calculate the rest of the CRC. */
-	crc = crc32c(crc, &buffer[sizeof(struct sctphdr)],
+	crc = sctp_crc32c(crc, &buffer[sizeof(struct sctphdr)],
 			    length - sizeof(struct sctphdr));
 	return crc;
 }
 
-static inline __u32 sctp_update_cksum(__u8 *buffer, __u16 length, __u32 crc32)
+static inline __be32 sctp_update_cksum(__u8 *buffer, __u16 length, __be32 crc32)
 {
-	return crc32c(crc32, buffer, length);
+	return sctp_crc32c(crc32, buffer, length);
 }
 
-static inline __u32 sctp_end_cksum(__u32 crc32)
+static inline __be32 sctp_end_cksum(__be32 crc32)
 {
-	return ntohl(~crc32);
+	return ~crc32;
 }
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 90b1e8d23b16..17b932b8a55a 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -179,6 +179,8 @@ int sctp_eps_proc_init(void);
 void sctp_eps_proc_exit(void);
 int sctp_assocs_proc_init(void);
 void sctp_assocs_proc_exit(void);
+int sctp_remaddr_proc_init(void);
+void sctp_remaddr_proc_exit(void);
 
 
 /*
@@ -218,8 +220,6 @@ extern struct kmem_cache *sctp_bucket_cachep __read_mostly;
 #define sctp_release_sock(sk)    release_sock(sk)
 #define sctp_bh_lock_sock(sk)    bh_lock_sock(sk)
 #define sctp_bh_unlock_sock(sk)  bh_unlock_sock(sk)
-#define SCTP_SOCK_SLEEP_PRE(sk)  SOCK_SLEEP_PRE(sk)
-#define SCTP_SOCK_SLEEP_POST(sk) SOCK_SLEEP_POST(sk)
 
 /* SCTP SNMP MIB stats handlers */
 DECLARE_SNMP_STAT(struct sctp_mib, sctp_statistics);
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 7f25195f9855..ab1c472ea753 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -300,6 +300,7 @@ struct sctp_sock {
 
 	/* The default SACK delay timeout for new associations. */
 	__u32 sackdelay;
+	__u32 sackfreq;
 
 	/* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */
 	__u32 param_flags;
@@ -523,8 +524,7 @@ static inline void sctp_ssn_skip(struct sctp_stream *stream, __u16 id,
  */
 struct sctp_af {
 	int		(*sctp_xmit)	(struct sk_buff *skb,
-					 struct sctp_transport *,
-					 int ipfragok);
+					 struct sctp_transport *);
 	int		(*setsockopt)	(struct sock *sk,
 					 int level,
 					 int optname,
@@ -826,7 +826,7 @@ struct sctp_packet *sctp_packet_init(struct sctp_packet *,
 				     __u16 sport, __u16 dport);
 struct sctp_packet *sctp_packet_config(struct sctp_packet *, __u32 vtag, int);
 sctp_xmit_t sctp_packet_transmit_chunk(struct sctp_packet *,
-                                       struct sctp_chunk *);
+                                       struct sctp_chunk *, int);
 sctp_xmit_t sctp_packet_append_chunk(struct sctp_packet *,
                                      struct sctp_chunk *);
 int sctp_packet_transmit(struct sctp_packet *);
@@ -946,6 +946,7 @@ struct sctp_transport {
 
 	/* SACK delay timeout */
 	unsigned long sackdelay;
+	__u32 sackfreq;
 
 	/* When was the last time (in jiffies) that we heard from this
 	 * transport?  We use this to pick new active and retran paths.
@@ -1159,7 +1160,6 @@ void sctp_outq_init(struct sctp_association *, struct sctp_outq *);
 void sctp_outq_teardown(struct sctp_outq *);
 void sctp_outq_free(struct sctp_outq*);
 int sctp_outq_tail(struct sctp_outq *, struct sctp_chunk *chunk);
-int sctp_outq_flush(struct sctp_outq *, int);
 int sctp_outq_sack(struct sctp_outq *, struct sctp_sackhdr *);
 int sctp_outq_is_empty(const struct sctp_outq *);
 void sctp_outq_restart(struct sctp_outq *);
@@ -1209,6 +1209,8 @@ int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *,
 int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *);
 int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *,
 			 struct sctp_sock *);
+int sctp_bind_addr_conflict(struct sctp_bind_addr *, const union sctp_addr *,
+			 struct sctp_sock *, struct sctp_sock *);
 int sctp_bind_addr_state(const struct sctp_bind_addr *bp,
 			 const union sctp_addr *addr);
 union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr	*bp,
@@ -1553,6 +1555,7 @@ struct sctp_association {
 		 *             : SACK's are not delayed (see Section 6).
 		 */
 		__u8    sack_needed;     /* Do we need to sack the peer? */
+		__u32	sack_cnt;
 
 		/* These are capabilities which our peer advertised.  */
 		__u8	ecn_capable;	 /* Can peer do ECN? */
@@ -1662,6 +1665,7 @@ struct sctp_association {
 
 	/* SACK delay timeout */
 	unsigned long sackdelay;
+	__u32 sackfreq;
 
 
 	unsigned long timeouts[SCTP_NUM_TIMEOUT_TYPES];
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 9619b9d35c9e..f205b10f0ab9 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -93,8 +93,9 @@ enum sctp_optname {
 #define SCTP_STATUS SCTP_STATUS
 	SCTP_GET_PEER_ADDR_INFO,
 #define SCTP_GET_PEER_ADDR_INFO SCTP_GET_PEER_ADDR_INFO
-	SCTP_DELAYED_ACK_TIME,
-#define SCTP_DELAYED_ACK_TIME SCTP_DELAYED_ACK_TIME
+	SCTP_DELAYED_ACK,
+#define SCTP_DELAYED_ACK_TIME SCTP_DELAYED_ACK
+#define SCTP_DELAYED_ACK SCTP_DELAYED_ACK
 	SCTP_CONTEXT,	/* Receive Context */
 #define SCTP_CONTEXT SCTP_CONTEXT
 	SCTP_FRAGMENT_INTERLEAVE,
@@ -136,12 +137,14 @@ enum sctp_optname {
 #define SCTP_GET_LOCAL_ADDRS_NUM_OLD	SCTP_GET_LOCAL_ADDRS_NUM_OLD
 	SCTP_GET_LOCAL_ADDRS_OLD, 	/* Get all local addresss. */
 #define SCTP_GET_LOCAL_ADDRS_OLD	SCTP_GET_LOCAL_ADDRS_OLD
-	SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */
-#define SCTP_SOCKOPT_CONNECTX	SCTP_SOCKOPT_CONNECTX
+	SCTP_SOCKOPT_CONNECTX_OLD, /* CONNECTX old requests. */
+#define SCTP_SOCKOPT_CONNECTX_OLD	SCTP_SOCKOPT_CONNECTX_OLD
 	SCTP_GET_PEER_ADDRS, 	/* Get all peer addresss. */
 #define SCTP_GET_PEER_ADDRS	SCTP_GET_PEER_ADDRS
 	SCTP_GET_LOCAL_ADDRS, 	/* Get all local addresss. */
 #define SCTP_GET_LOCAL_ADDRS	SCTP_GET_LOCAL_ADDRS
+	SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */
+#define SCTP_SOCKOPT_CONNECTX	SCTP_SOCKOPT_CONNECTX
 };
 
 /*
@@ -618,13 +621,26 @@ struct sctp_authkeyid {
 };
 
 
-/* 7.1.23. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME)
+/*
+ * 7.1.23.  Get or set delayed ack timer (SCTP_DELAYED_SACK)
  *
- *   This options will get or set the delayed ack timer.  The time is set
- *   in milliseconds.  If the assoc_id is 0, then this sets or gets the
- *   endpoints default delayed ack timer value.  If the assoc_id field is
- *   non-zero, then the set or get effects the specified association.
+ * This option will effect the way delayed acks are performed.  This
+ * option allows you to get or set the delayed ack time, in
+ * milliseconds.  It also allows changing the delayed ack frequency.
+ * Changing the frequency to 1 disables the delayed sack algorithm.  If
+ * the assoc_id is 0, then this sets or gets the endpoints default
+ * values.  If the assoc_id field is non-zero, then the set or get
+ * effects the specified association for the one to many model (the
+ * assoc_id field is ignored by the one to one model).  Note that if
+ * sack_delay or sack_freq are 0 when setting this option, then the
+ * current values will remain unchanged.
  */
+struct sctp_sack_info {
+	sctp_assoc_t	sack_assoc_id;
+	uint32_t	sack_delay;
+	uint32_t	sack_freq;
+};
+
 struct sctp_assoc_value {
     sctp_assoc_t            assoc_id;
     uint32_t                assoc_value;
diff --git a/include/net/snmp.h b/include/net/snmp.h
index ce2f48507510..57c93628695f 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -14,8 +14,6 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  *
- *		$Id: snmp.h,v 1.19 2001/06/14 13:40:46 davem Exp $
- *
  */
  
 #ifndef _SNMP_H
diff --git a/include/net/sock.h b/include/net/sock.h
index dc42b44c2aa1..06c5259aff30 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -166,7 +166,7 @@ struct sock_common {
   *	@sk_err: last error
   *	@sk_err_soft: errors that don't cause failure but are the cause of a
   *		      persistent failure not just 'timed out'
-  *	@sk_drops: raw drops counter
+  *	@sk_drops: raw/udp drops counter
   *	@sk_ack_backlog: current listen backlog
   *	@sk_max_ack_backlog: listen backlog set in listen()
   *	@sk_priority: %SO_PRIORITY setting
@@ -524,7 +524,7 @@ struct proto {
 	int			(*ioctl)(struct sock *sk, int cmd,
 					 unsigned long arg);
 	int			(*init)(struct sock *sk);
-	int			(*destroy)(struct sock *sk);
+	void			(*destroy)(struct sock *sk);
 	void			(*shutdown)(struct sock *sk, int how);
 	int			(*setsockopt)(struct sock *sk, int level, 
 					int optname, char __user *optval,
@@ -565,7 +565,7 @@ struct proto {
 #endif
 
 	/* Memory pressure */
-	void			(*enter_memory_pressure)(void);
+	void			(*enter_memory_pressure)(struct sock *sk);
 	atomic_t		*memory_allocated;	/* Current allocated memory. */
 	atomic_t		*sockets_allocated;	/* Current number of sockets. */
 	/*
@@ -990,6 +990,11 @@ static inline void sock_put(struct sock *sk)
 extern int sk_receive_skb(struct sock *sk, struct sk_buff *skb,
 			  const int nested);
 
+static inline void sk_set_socket(struct sock *sk, struct socket *sock)
+{
+	sk->sk_socket = sock;
+}
+
 /* Detach socket from process context.
  * Announce socket dead, detach it from wait queue and inode.
  * Note that parent inode held reference count on this struct sock,
@@ -1001,7 +1006,7 @@ static inline void sock_orphan(struct sock *sk)
 {
 	write_lock_bh(&sk->sk_callback_lock);
 	sock_set_flag(sk, SOCK_DEAD);
-	sk->sk_socket = NULL;
+	sk_set_socket(sk, NULL);
 	sk->sk_sleep  = NULL;
 	write_unlock_bh(&sk->sk_callback_lock);
 }
@@ -1011,7 +1016,7 @@ static inline void sock_graft(struct sock *sk, struct socket *parent)
 	write_lock_bh(&sk->sk_callback_lock);
 	sk->sk_sleep = &parent->wait;
 	parent->sk = sk;
-	sk->sk_socket = parent;
+	sk_set_socket(sk, parent);
 	security_sock_graft(sk, parent);
 	write_unlock_bh(&sk->sk_callback_lock);
 }
@@ -1205,7 +1210,7 @@ static inline struct page *sk_stream_alloc_page(struct sock *sk)
 
 	page = alloc_pages(sk->sk_allocation, 0);
 	if (!page) {
-		sk->sk_prot->enter_memory_pressure();
+		sk->sk_prot->enter_memory_pressure(sk);
 		sk_stream_moderate_sndbuf(sk);
 	}
 	return page;
@@ -1331,30 +1336,6 @@ extern int net_msg_warn;
 #define LIMIT_NETDEBUG(fmt, args...) \
 	do { if (net_msg_warn && net_ratelimit()) printk(fmt,##args); } while(0)
 
-/*
- * Macros for sleeping on a socket. Use them like this:
- *
- * SOCK_SLEEP_PRE(sk)
- * if (condition)
- * 	schedule();
- * SOCK_SLEEP_POST(sk)
- *
- * N.B. These are now obsolete and were, afaik, only ever used in DECnet
- * and when the last use of them in DECnet has gone, I'm intending to
- * remove them.
- */
-
-#define SOCK_SLEEP_PRE(sk) 	{ struct task_struct *tsk = current; \
-				DECLARE_WAITQUEUE(wait, tsk); \
-				tsk->state = TASK_INTERRUPTIBLE; \
-				add_wait_queue((sk)->sk_sleep, &wait); \
-				release_sock(sk);
-
-#define SOCK_SLEEP_POST(sk)	tsk->state = TASK_RUNNING; \
-				remove_wait_queue((sk)->sk_sleep, &wait); \
-				lock_sock(sk); \
-				}
-
 extern __u32 sysctl_wmem_max;
 extern __u32 sysctl_rmem_max;
 
diff --git a/include/net/stp.h b/include/net/stp.h
new file mode 100644
index 000000000000..ad447f105417
--- /dev/null
+++ b/include/net/stp.h
@@ -0,0 +1,14 @@
+#ifndef _NET_STP_H
+#define _NET_STP_H
+
+struct stp_proto {
+	unsigned char	group_address[ETH_ALEN];
+	void		(*rcv)(const struct stp_proto *, struct sk_buff *,
+			       struct net_device *);
+	void		*data;
+};
+
+extern int stp_proto_register(const struct stp_proto *proto);
+extern void stp_proto_unregister(const struct stp_proto *proto);
+
+#endif /* _NET_STP_H */
diff --git a/include/net/syncppp.h b/include/net/syncppp.h
index e43f4070d892..9e306f7f579a 100644
--- a/include/net/syncppp.h
+++ b/include/net/syncppp.h
@@ -43,8 +43,6 @@ struct sppp
 	u32		pp_rseq;	/* remote sequence number */
 	struct slcp	lcp;		/* LCP params */
 	struct sipcp	ipcp;		/* IPCP params */
-	u32		ibytes,obytes;	/* Bytes in/out */
-	u32		ipkts,opkts;	/* Packets in/out */
 	struct timer_list	pp_timer;
 	struct net_device	*pp_if;
 	char		pp_link_state;	/* Link status */
diff --git a/include/net/tcp.h b/include/net/tcp.h
index cf54034019d9..8983386356a5 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -50,6 +50,7 @@ extern atomic_t tcp_orphan_count;
 extern void tcp_time_wait(struct sock *sk, int state, int timeo);
 
 #define MAX_TCP_HEADER	(128 + MAX_HEADER)
+#define MAX_TCP_OPTION_SPACE 40
 
 /* 
  * Never offer a window over 32767 without using window scaling. Some
@@ -184,6 +185,7 @@ extern void tcp_time_wait(struct sock *sk, int state, int timeo);
 #define TCPOLEN_SACK_BASE_ALIGNED	4
 #define TCPOLEN_SACK_PERBLOCK		8
 #define TCPOLEN_MD5SIG_ALIGNED		20
+#define TCPOLEN_MSS_ALIGNED		4
 
 /* Flags in tp->nonagle */
 #define TCP_NAGLE_OFF		1	/* Nagle's algo is disabled */
@@ -265,13 +267,10 @@ static inline int tcp_too_many_orphans(struct sock *sk, int num)
 
 extern struct proto tcp_prot;
 
-DECLARE_SNMP_STAT(struct tcp_mib, tcp_statistics);
-#define TCP_INC_STATS(field)		SNMP_INC_STATS(tcp_statistics, field)
-#define TCP_INC_STATS_BH(field)		SNMP_INC_STATS_BH(tcp_statistics, field)
-#define TCP_INC_STATS_USER(field) 	SNMP_INC_STATS_USER(tcp_statistics, field)
-#define TCP_DEC_STATS(field)		SNMP_DEC_STATS(tcp_statistics, field)
-#define TCP_ADD_STATS_BH(field, val)	SNMP_ADD_STATS_BH(tcp_statistics, field, val)
-#define TCP_ADD_STATS_USER(field, val)	SNMP_ADD_STATS_USER(tcp_statistics, field, val)
+#define TCP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.tcp_statistics, field)
+#define TCP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.tcp_statistics, field)
+#define TCP_DEC_STATS(net, field)	SNMP_DEC_STATS((net)->mib.tcp_statistics, field)
+#define TCP_ADD_STATS_USER(net, field, val) SNMP_ADD_STATS_USER((net)->mib.tcp_statistics, field, val)
 
 extern void			tcp_v4_err(struct sk_buff *skb, u32);
 
@@ -398,6 +397,8 @@ extern void			tcp_parse_options(struct sk_buff *skb,
 						  struct tcp_options_received *opt_rx,
 						  int estab);
 
+extern u8			*tcp_parse_md5sig_option(struct tcphdr *th);
+
 /*
  *	TCP v4 functions exported for the inet6 API
  */
@@ -894,7 +895,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
 
 			while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
 				sk->sk_backlog_rcv(sk, skb1);
-				NET_INC_STATS_BH(LINUX_MIB_TCPPREQUEUEDROPPED);
+				NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPPREQUEUEDROPPED);
 			}
 
 			tp->ucopy.memory = 0;
@@ -975,7 +976,7 @@ static inline void tcp_openreq_init(struct request_sock *req,
 	ireq->rmt_port = tcp_hdr(skb)->source;
 }
 
-extern void tcp_enter_memory_pressure(void);
+extern void tcp_enter_memory_pressure(struct sock *sk);
 
 static inline int keepalive_intvl_when(const struct tcp_sock *tp)
 {
@@ -1024,13 +1025,13 @@ static inline int tcp_paws_check(const struct tcp_options_received *rx_opt, int
 
 #define TCP_CHECK_TIMER(sk) do { } while (0)
 
-static inline void tcp_mib_init(void)
+static inline void tcp_mib_init(struct net *net)
 {
 	/* See RFC 2012 */
-	TCP_ADD_STATS_USER(TCP_MIB_RTOALGORITHM, 1);
-	TCP_ADD_STATS_USER(TCP_MIB_RTOMIN, TCP_RTO_MIN*1000/HZ);
-	TCP_ADD_STATS_USER(TCP_MIB_RTOMAX, TCP_RTO_MAX*1000/HZ);
-	TCP_ADD_STATS_USER(TCP_MIB_MAXCONN, -1);
+	TCP_ADD_STATS_USER(net, TCP_MIB_RTOALGORITHM, 1);
+	TCP_ADD_STATS_USER(net, TCP_MIB_RTOMIN, TCP_RTO_MIN*1000/HZ);
+	TCP_ADD_STATS_USER(net, TCP_MIB_RTOMAX, TCP_RTO_MAX*1000/HZ);
+	TCP_ADD_STATS_USER(net, TCP_MIB_MAXCONN, -1);
 }
 
 /* from STCP */
@@ -1113,14 +1114,12 @@ struct tcp_md5sig_pool {
 #define TCP_MD5SIG_MAXKEYS	(~(u32)0)	/* really?! */
 
 /* - functions */
-extern int			tcp_v4_calc_md5_hash(char *md5_hash,
-						     struct tcp_md5sig_key *key,
-						     struct sock *sk,
-						     struct dst_entry *dst,
-						     struct request_sock *req,
-						     struct tcphdr *th,
-						     int protocol,
-						     unsigned int tcplen);
+extern int			tcp_v4_md5_hash_skb(char *md5_hash,
+						    struct tcp_md5sig_key *key,
+						    struct sock *sk,
+						    struct request_sock *req,
+						    struct sk_buff *skb);
+
 extern struct tcp_md5sig_key	*tcp_v4_md5_lookup(struct sock *sk,
 						   struct sock *addr_sk);
 
@@ -1132,11 +1131,26 @@ extern int			tcp_v4_md5_do_add(struct sock *sk,
 extern int			tcp_v4_md5_do_del(struct sock *sk,
 						  __be32 addr);
 
+#ifdef CONFIG_TCP_MD5SIG
+#define tcp_twsk_md5_key(twsk)	((twsk)->tw_md5_keylen ? 		 \
+				 &(struct tcp_md5sig_key) {		 \
+					.key = (twsk)->tw_md5_key,	 \
+					.keylen = (twsk)->tw_md5_keylen, \
+				} : NULL)
+#else
+#define tcp_twsk_md5_key(twsk)	NULL
+#endif
+
 extern struct tcp_md5sig_pool	**tcp_alloc_md5sig_pool(void);
 extern void			tcp_free_md5sig_pool(void);
 
 extern struct tcp_md5sig_pool	*__tcp_get_md5sig_pool(int cpu);
 extern void			__tcp_put_md5sig_pool(void);
+extern int tcp_md5_hash_header(struct tcp_md5sig_pool *, struct tcphdr *);
+extern int tcp_md5_hash_skb_data(struct tcp_md5sig_pool *, struct sk_buff *,
+				 unsigned header_len);
+extern int tcp_md5_hash_key(struct tcp_md5sig_pool *hp,
+			    struct tcp_md5sig_key *key);
 
 static inline
 struct tcp_md5sig_pool		*tcp_get_md5sig_pool(void)
@@ -1348,7 +1362,7 @@ extern void tcp_proc_unregister(struct net *net, struct tcp_seq_afinfo *afinfo);
 extern struct request_sock_ops tcp_request_sock_ops;
 extern struct request_sock_ops tcp6_request_sock_ops;
 
-extern int tcp_v4_destroy_sock(struct sock *sk);
+extern void tcp_v4_destroy_sock(struct sock *sk);
 
 extern int tcp_v4_gso_send_check(struct sk_buff *skb);
 extern struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features);
@@ -1366,11 +1380,8 @@ struct tcp_sock_af_ops {
 	int			(*calc_md5_hash) (char *location,
 						  struct tcp_md5sig_key *md5,
 						  struct sock *sk,
-						  struct dst_entry *dst,
 						  struct request_sock *req,
-						  struct tcphdr *th,
-						  int protocol,
-						  unsigned int len);
+						  struct sk_buff *skb);
 	int			(*md5_add) (struct sock *sk,
 					    struct sock *addr_sk,
 					    u8 *newkey,
diff --git a/include/net/tipc/tipc_port.h b/include/net/tipc/tipc_port.h
index 11105bcc4457..c54917cbfa48 100644
--- a/include/net/tipc/tipc_port.h
+++ b/include/net/tipc/tipc_port.h
@@ -2,7 +2,7 @@
  * include/net/tipc/tipc_port.h: Include file for privileged access to TIPC ports
  * 
  * Copyright (c) 1994-2007, Ericsson AB
- * Copyright (c) 2005-2007, Wind River Systems
+ * Copyright (c) 2005-2008, Wind River Systems
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -75,13 +75,7 @@ struct tipc_port {
 };
 
 
-/**
- * tipc_createport_raw - create a native TIPC port and return it's reference
- *
- * Note: 'dispatcher' and 'wakeup' deliver a locked port.
- */
-
-u32 tipc_createport_raw(void *usr_handle,
+struct tipc_port *tipc_createport_raw(void *usr_handle,
 			u32 (*dispatcher)(struct tipc_port *, struct sk_buff *),
 			void (*wakeup)(struct tipc_port *),
 			const u32 importance);
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index 112934a3288d..876b6f2bb4fd 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -53,7 +53,7 @@ extern int			datagram_send_ctl(struct net *net,
  */
 extern struct inet_connection_sock_af_ops ipv4_specific;
 
-extern int inet6_destroy_sock(struct sock *sk);
+extern void inet6_destroy_sock(struct sock *sk);
 
 #endif
 
diff --git a/include/net/udp.h b/include/net/udp.h
index ccce83707046..addcdc67234c 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -148,27 +148,25 @@ extern int 	udp_lib_setsockopt(struct sock *sk, int level, int optname,
 				   char __user *optval, int optlen,
 				   int (*push_pending_frames)(struct sock *));
 
-DECLARE_SNMP_STAT(struct udp_mib, udp_statistics);
 DECLARE_SNMP_STAT(struct udp_mib, udp_stats_in6);
 
 /* UDP-Lite does not have a standardized MIB yet, so we inherit from UDP */
-DECLARE_SNMP_STAT(struct udp_mib, udplite_statistics);
 DECLARE_SNMP_STAT(struct udp_mib, udplite_stats_in6);
 
 /*
  * 	SNMP statistics for UDP and UDP-Lite
  */
-#define UDP_INC_STATS_USER(field, is_udplite)			       do {   \
-	if (is_udplite) SNMP_INC_STATS_USER(udplite_statistics, field);       \
-	else		SNMP_INC_STATS_USER(udp_statistics, field);  }  while(0)
-#define UDP_INC_STATS_BH(field, is_udplite) 			       do  {  \
-	if (is_udplite) SNMP_INC_STATS_BH(udplite_statistics, field);         \
-	else		SNMP_INC_STATS_BH(udp_statistics, field);    }  while(0)
-
-#define UDP6_INC_STATS_BH(field, is_udplite) 			      do  {  \
+#define UDP_INC_STATS_USER(net, field, is_udplite)	      do { \
+	if (is_udplite) SNMP_INC_STATS_USER((net)->mib.udplite_statistics, field);       \
+	else		SNMP_INC_STATS_USER((net)->mib.udp_statistics, field);  }  while(0)
+#define UDP_INC_STATS_BH(net, field, is_udplite) 	      do { \
+	if (is_udplite) SNMP_INC_STATS_BH((net)->mib.udplite_statistics, field);         \
+	else		SNMP_INC_STATS_BH((net)->mib.udp_statistics, field);    }  while(0)
+
+#define UDP6_INC_STATS_BH(net, field, is_udplite) 	    do { (void)net;  \
 	if (is_udplite) SNMP_INC_STATS_BH(udplite_stats_in6, field);         \
 	else		SNMP_INC_STATS_BH(udp_stats_in6, field);    } while(0)
-#define UDP6_INC_STATS_USER(field, is_udplite)			       do {    \
+#define UDP6_INC_STATS_USER(net, field, is_udplite)	    do { (void)net;    \
 	if (is_udplite) SNMP_INC_STATS_USER(udplite_stats_in6, field);         \
 	else		SNMP_INC_STATS_USER(udp_stats_in6, field);    } while(0)
 
@@ -176,12 +174,12 @@ DECLARE_SNMP_STAT(struct udp_mib, udplite_stats_in6);
 #define UDPX_INC_STATS_BH(sk, field) \
 	do { \
 		if ((sk)->sk_family == AF_INET) \
-			UDP_INC_STATS_BH(field, 0); \
+			UDP_INC_STATS_BH(sock_net(sk), field, 0); \
 		else \
-			UDP6_INC_STATS_BH(field, 0); \
+			UDP6_INC_STATS_BH(sock_net(sk), field, 0); \
 	} while (0);
 #else
-#define UDPX_INC_STATS_BH(sk, field) UDP_INC_STATS_BH(field, 0)
+#define UDPX_INC_STATS_BH(sk, field) UDP_INC_STATS_BH(sock_net(sk), field, 0)
 #endif
 
 /* /proc */
@@ -196,8 +194,8 @@ struct udp_seq_afinfo {
 struct udp_iter_state {
 	struct seq_net_private  p;
 	sa_family_t		family;
-	struct hlist_head	*hashtable;
 	int			bucket;
+	struct hlist_head	*hashtable;
 };
 
 #ifdef CONFIG_PROC_FS
diff --git a/include/net/wext.h b/include/net/wext.h
index 80b31d826b7a..6d76a39a9c5b 100644
--- a/include/net/wext.h
+++ b/include/net/wext.h
@@ -12,6 +12,8 @@ extern int wext_proc_init(struct net *net);
 extern void wext_proc_exit(struct net *net);
 extern int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
 			     void __user *arg);
+extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
+				    unsigned long arg);
 #else
 static inline int wext_proc_init(struct net *net)
 {
@@ -26,6 +28,11 @@ static inline int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned
 {
 	return -EINVAL;
 }
+static inline int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
+					   unsigned long arg)
+{
+	return -EINVAL;
+}
 #endif
 
 #endif /* __NET_WEXT_H */
diff --git a/include/net/wireless.h b/include/net/wireless.h
index 667b4080d30f..9324f8dd183e 100644
--- a/include/net/wireless.h
+++ b/include/net/wireless.h
@@ -39,12 +39,18 @@ enum ieee80211_band {
  *	on this channel.
  * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
  * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel
+ * 	is not permitted.
+ * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel
+ * 	is not permitted.
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED		= 1<<0,
 	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
 	IEEE80211_CHAN_NO_IBSS		= 1<<2,
 	IEEE80211_CHAN_RADAR		= 1<<3,
+	IEEE80211_CHAN_NO_FAT_ABOVE	= 1<<4,
+	IEEE80211_CHAN_NO_FAT_BELOW	= 1<<5,
 };
 
 /**
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 90b529f7a154..936e333e7ce5 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1590,7 +1590,7 @@ static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
 {
 	if (dev->dma_ops)
 		return dev->dma_ops->mapping_error(dev, dma_addr);
-	return dma_mapping_error(dma_addr);
+	return dma_mapping_error(dev->dma_device, dma_addr);
 }
 
 /**
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 22bb2e7bab1a..c6b2962315b3 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -57,7 +57,9 @@ enum rdma_cm_event_type {
 	RDMA_CM_EVENT_DISCONNECTED,
 	RDMA_CM_EVENT_DEVICE_REMOVAL,
 	RDMA_CM_EVENT_MULTICAST_JOIN,
-	RDMA_CM_EVENT_MULTICAST_ERROR
+	RDMA_CM_EVENT_MULTICAST_ERROR,
+	RDMA_CM_EVENT_ADDR_CHANGE,
+	RDMA_CM_EVENT_TIMEWAIT_EXIT
 };
 
 enum rdma_port_space {
@@ -69,12 +71,8 @@ enum rdma_port_space {
 };
 
 struct rdma_addr {
-	struct sockaddr src_addr;
-	u8		src_pad[sizeof(struct sockaddr_in6) -
-				sizeof(struct sockaddr)];
-	struct sockaddr dst_addr;
-	u8		dst_pad[sizeof(struct sockaddr_in6) -
-				sizeof(struct sockaddr)];
+	struct sockaddr_storage src_addr;
+	struct sockaddr_storage dst_addr;
 	struct rdma_dev_addr dev_addr;
 };
 
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 00137a7769ee..5c40cc537d4c 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -106,6 +106,7 @@
 #define VARIABLE_LENGTH_CMD   0x7f
 #define REPORT_LUNS           0xa0
 #define MAINTENANCE_IN        0xa3
+#define MAINTENANCE_OUT       0xa4
 #define MOVE_MEDIUM           0xa5
 #define EXCHANGE_MEDIUM       0xa6
 #define READ_12               0xa8
@@ -125,6 +126,8 @@
 #define	SAI_READ_CAPACITY_16  0x10
 /* values for maintenance in */
 #define MI_REPORT_TARGET_PGS  0x0a
+/* values for maintenance out */
+#define MO_SET_TARGET_PGS     0x0a
 
 /* Values for T10/04-262r7 */
 #define	ATA_16		      0x85	/* 16-byte pass-thru */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 66c944849d6b..f9f6e793575c 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -77,6 +77,9 @@ struct scsi_cmnd {
 	int allowed;
 	int timeout_per_command;
 
+	unsigned char prot_op;
+	unsigned char prot_type;
+
 	unsigned short cmd_len;
 	enum dma_data_direction sc_data_direction;
 
@@ -87,6 +90,8 @@ struct scsi_cmnd {
 
 	/* These elements define the operation we ultimately want to perform */
 	struct scsi_data_buffer sdb;
+	struct scsi_data_buffer *prot_sdb;
+
 	unsigned underflow;	/* Return error if less than
 				   this amount is transferred */
 
@@ -208,4 +213,85 @@ static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
 				 buf, buflen);
 }
 
+/*
+ * The operations below are hints that tell the controller driver how
+ * to handle I/Os with DIF or similar types of protection information.
+ */
+enum scsi_prot_operations {
+	/* Normal I/O */
+	SCSI_PROT_NORMAL = 0,
+
+	/* OS-HBA: Protected, HBA-Target: Unprotected */
+	SCSI_PROT_READ_INSERT,
+	SCSI_PROT_WRITE_STRIP,
+
+	/* OS-HBA: Unprotected, HBA-Target: Protected */
+	SCSI_PROT_READ_STRIP,
+	SCSI_PROT_WRITE_INSERT,
+
+	/* OS-HBA: Protected, HBA-Target: Protected */
+	SCSI_PROT_READ_PASS,
+	SCSI_PROT_WRITE_PASS,
+
+	/* OS-HBA: Protected, HBA-Target: Protected, checksum conversion */
+	SCSI_PROT_READ_CONVERT,
+	SCSI_PROT_WRITE_CONVERT,
+};
+
+static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
+{
+	scmd->prot_op = op;
+}
+
+static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_op;
+}
+
+/*
+ * The controller usually does not know anything about the target it
+ * is communicating with.  However, when DIX is enabled the controller
+ * must be know target type so it can verify the protection
+ * information passed along with the I/O.
+ */
+enum scsi_prot_target_type {
+	SCSI_PROT_DIF_TYPE0 = 0,
+	SCSI_PROT_DIF_TYPE1,
+	SCSI_PROT_DIF_TYPE2,
+	SCSI_PROT_DIF_TYPE3,
+};
+
+static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
+{
+	scmd->prot_type = type;
+}
+
+static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_type;
+}
+
+static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
+{
+	return scmd->request->sector;
+}
+
+static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
+}
+
+static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
+}
+
+static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb;
+}
+
+#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)		\
+	for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+
 #endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 6467f78b191f..291d56a19167 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -140,7 +140,8 @@ struct scsi_device {
 	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
 	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
 	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
-	unsigned last_sector_bug:1;	/* Always read last sector in a 1 sector read */
+	unsigned last_sector_bug:1;	/* do not use multisector accesses on
+					   SD_LAST_BUGGY_SECTORS */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
 	struct list_head event_list;	/* asserted events */
@@ -167,15 +168,22 @@ struct scsi_device {
 	unsigned long		sdev_data[0];
 } __attribute__((aligned(sizeof(unsigned long))));
 
+struct scsi_dh_devlist {
+	char *vendor;
+	char *model;
+};
+
 struct scsi_device_handler {
 	/* Used by the infrastructure */
 	struct list_head list; /* list of scsi_device_handlers */
-	struct notifier_block nb;
 
 	/* Filled by the hardware handler */
 	struct module *module;
 	const char *name;
+	const struct scsi_dh_devlist *devlist;
 	int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
+	int (*attach)(struct scsi_device *);
+	void (*detach)(struct scsi_device *);
 	int (*activate)(struct scsi_device *);
 	int (*prep_fn)(struct scsi_device *, struct request *);
 };
@@ -416,6 +424,11 @@ static inline int scsi_device_enclosure(struct scsi_device *sdev)
 	return sdev->inquiry[6] & (1<<6);
 }
 
+static inline int scsi_device_protection(struct scsi_device *sdev)
+{
+	return sdev->inquiry[5] & (1<<0);
+}
+
 #define MODULE_ALIAS_SCSI_DEVICE(type) \
 	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
index 3ad2303d1a16..33efce20c26c 100644
--- a/include/scsi/scsi_dh.h
+++ b/include/scsi/scsi_dh.h
@@ -32,6 +32,7 @@ enum {
 	 */
 	SCSI_DH_DEV_FAILED,	/* generic device error */
 	SCSI_DH_DEV_TEMP_BUSY,
+	SCSI_DH_DEV_UNSUPP,	/* device handler not supported */
 	SCSI_DH_DEVICE_MAX,	/* max device blkerr definition */
 
 	/*
@@ -57,6 +58,8 @@ enum {
 #if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE)
 extern int scsi_dh_activate(struct request_queue *);
 extern int scsi_dh_handler_exist(const char *);
+extern int scsi_dh_attach(struct request_queue *, const char *);
+extern void scsi_dh_detach(struct request_queue *);
 #else
 static inline int scsi_dh_activate(struct request_queue *req)
 {
@@ -66,4 +69,12 @@ static inline int scsi_dh_handler_exist(const char *name)
 {
 	return 0;
 }
+static inline int scsi_dh_attach(struct request_queue *req, const char *name)
+{
+	return SCSI_DH_NOSYS;
+}
+static inline void scsi_dh_detach(struct request_queue *q)
+{
+	return;
+}
 #endif
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index 2a9add21267d..06a8790893ef 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -74,7 +74,9 @@ struct scsi_eh_save {
 	/* saved state */
 	int result;
 	enum dma_data_direction data_direction;
+	unsigned underflow;
 	unsigned char cmd_len;
+	unsigned char prot_op;
 	unsigned char *cmnd;
 	struct scsi_data_buffer sdb;
 	struct request *next_rq;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 1834fdfe82a7..44a55d1bf530 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -547,7 +547,7 @@ struct Scsi_Host {
 	unsigned int host_failed;	   /* commands that failed. */
 	unsigned int host_eh_scheduled;    /* EH scheduled without command */
     
-	unsigned short host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
+	unsigned int host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
 	int resetting; /* if set, it means that last_reset is a valid value */
 	unsigned long last_reset;
 
@@ -623,7 +623,7 @@ struct Scsi_Host {
 	/*
 	 * Optional work queue to be utilized by the transport
 	 */
-	char work_q_name[KOBJ_NAME_LEN];
+	char work_q_name[20];
 	struct workqueue_struct *work_q;
 
 	/*
@@ -636,6 +636,10 @@ struct Scsi_Host {
 	 */
 	unsigned int max_host_blocked;
 
+	/* Protection Information */
+	unsigned int prot_capabilities;
+	unsigned char prot_guard_type;
+
 	/*
 	 * q used for scsi_tgt msgs, async events or any other requests that
 	 * need to be processed in userspace
@@ -756,6 +760,86 @@ extern struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
 extern void scsi_free_host_dev(struct scsi_device *);
 extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
 
+/*
+ * DIF defines the exchange of protection information between
+ * initiator and SBC block device.
+ *
+ * DIX defines the exchange of protection information between OS and
+ * initiator.
+ */
+enum scsi_host_prot_capabilities {
+	SHOST_DIF_TYPE1_PROTECTION = 1 << 0, /* T10 DIF Type 1 */
+	SHOST_DIF_TYPE2_PROTECTION = 1 << 1, /* T10 DIF Type 2 */
+	SHOST_DIF_TYPE3_PROTECTION = 1 << 2, /* T10 DIF Type 3 */
+
+	SHOST_DIX_TYPE0_PROTECTION = 1 << 3, /* DIX between OS and HBA only */
+	SHOST_DIX_TYPE1_PROTECTION = 1 << 4, /* DIX with DIF Type 1 */
+	SHOST_DIX_TYPE2_PROTECTION = 1 << 5, /* DIX with DIF Type 2 */
+	SHOST_DIX_TYPE3_PROTECTION = 1 << 6, /* DIX with DIF Type 3 */
+};
+
+/*
+ * SCSI hosts which support the Data Integrity Extensions must
+ * indicate their capabilities by setting the prot_capabilities using
+ * this call.
+ */
+static inline void scsi_host_set_prot(struct Scsi_Host *shost, unsigned int mask)
+{
+	shost->prot_capabilities = mask;
+}
+
+static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost)
+{
+	return shost->prot_capabilities;
+}
+
+static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	switch (target_type) {
+	case 1: return shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION;
+	case 2: return shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION;
+	case 3: return shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION;
+	}
+
+	return 0;
+}
+
+static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	switch (target_type) {
+	case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION;
+	case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION;
+	case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION;
+	case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION;
+	}
+
+	return 0;
+}
+
+/*
+ * All DIX-capable initiators must support the T10-mandated CRC
+ * checksum.  Controllers can optionally implement the IP checksum
+ * scheme which has much lower impact on system performance.  Note
+ * that the main rationale for the checksum is to match integrity
+ * metadata with data.  Detecting bit errors are a job for ECC memory
+ * and buses.
+ */
+
+enum scsi_host_guard_type {
+	SHOST_DIX_GUARD_CRC = 1 << 0,
+	SHOST_DIX_GUARD_IP  = 1 << 1,
+};
+
+static inline void scsi_host_set_guard(struct Scsi_Host *shost, unsigned char type)
+{
+	shost->prot_guard_type = type;
+}
+
+static inline unsigned char scsi_host_get_guard(struct Scsi_Host *shost)
+{
+	return shost->prot_guard_type;
+}
+
 /* legacy interfaces */
 extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);
 extern void scsi_unregister(struct Scsi_Host *);
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 06f72bab9df0..878373c32ef7 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -489,9 +489,9 @@ struct fc_host_attrs {
 	u16 npiv_vports_inuse;
 
 	/* work queues for rport state manipulation */
-	char work_q_name[KOBJ_NAME_LEN];
+	char work_q_name[20];
 	struct workqueue_struct *work_q;
-	char devloss_work_q_name[KOBJ_NAME_LEN];
+	char devloss_work_q_name[20];
 	struct workqueue_struct *devloss_work_q;
 };
 
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index f5444e033cc9..8b6c91df4c7a 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -198,7 +198,7 @@ struct iscsi_cls_host {
 	atomic_t nr_scans;
 	struct mutex mutex;
 	struct workqueue_struct *scan_workq;
-	char scan_workq_name[KOBJ_NAME_LEN];
+	char scan_workq_name[20];
 };
 
 extern void iscsi_host_for_each_session(struct Scsi_Host *shost,
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 3030fdc6981d..c1b26fcc0b5c 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -202,6 +202,9 @@ struct snd_soc_dapm_path;
 struct snd_soc_dapm_pin;
 struct snd_soc_dapm_route;
 
+int dapm_reg_event(struct snd_soc_dapm_widget *w,
+		   struct snd_kcontrol *kcontrol, int event);
+
 /* dapm controls */
 int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index ed64862c4e18..613173b5db69 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -22,6 +22,7 @@
 #ifndef __ATMEL_LCDC_H__
 #define __ATMEL_LCDC_H__
 
+#include <linux/workqueue.h>
 
 /* Way LCD wires are connected to the chip:
  * Some Atmel chips use BGR color mode (instead of standard RGB)
@@ -37,6 +38,7 @@ struct atmel_lcdfb_info {
 	struct fb_info		*info;
 	void __iomem		*mmio;
 	unsigned long		irq_base;
+	struct work_struct	task;
 
 	unsigned int		guard_time;
 	struct platform_device	*pdev;
diff --git a/include/video/ili9320.h b/include/video/ili9320.h
new file mode 100644
index 000000000000..e5d1622e3f33
--- /dev/null
+++ b/include/video/ili9320.h
@@ -0,0 +1,201 @@
+/* include/video/ili9320.c
+ *
+ * ILI9320 LCD controller configuration control.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define ILI9320_REG(x)	(x)
+
+#define ILI9320_INDEX			ILI9320_REG(0x00)
+
+#define ILI9320_OSCILATION		ILI9320_REG(0x00)
+#define ILI9320_DRIVER			ILI9320_REG(0x01)
+#define ILI9320_DRIVEWAVE		ILI9320_REG(0x02)
+#define ILI9320_ENTRYMODE		ILI9320_REG(0x03)
+#define ILI9320_RESIZING		ILI9320_REG(0x04)
+#define ILI9320_DISPLAY1		ILI9320_REG(0x07)
+#define ILI9320_DISPLAY2		ILI9320_REG(0x08)
+#define ILI9320_DISPLAY3		ILI9320_REG(0x09)
+#define ILI9320_DISPLAY4		ILI9320_REG(0x0A)
+#define ILI9320_RGB_IF1			ILI9320_REG(0x0C)
+#define ILI9320_FRAMEMAKER		ILI9320_REG(0x0D)
+#define ILI9320_RGB_IF2			ILI9320_REG(0x0F)
+
+#define ILI9320_POWER1			ILI9320_REG(0x10)
+#define ILI9320_POWER2			ILI9320_REG(0x11)
+#define ILI9320_POWER3			ILI9320_REG(0x12)
+#define ILI9320_POWER4			ILI9320_REG(0x13)
+#define ILI9320_GRAM_HORIZ_ADDR		ILI9320_REG(0x20)
+#define ILI9320_GRAM_VERT_ADD		ILI9320_REG(0x21)
+#define ILI9320_POWER7			ILI9320_REG(0x29)
+#define ILI9320_FRAME_RATE_COLOUR	ILI9320_REG(0x2B)
+
+#define ILI9320_GAMMA1			ILI9320_REG(0x30)
+#define ILI9320_GAMMA2			ILI9320_REG(0x31)
+#define ILI9320_GAMMA3			ILI9320_REG(0x32)
+#define ILI9320_GAMMA4			ILI9320_REG(0x35)
+#define ILI9320_GAMMA5			ILI9320_REG(0x36)
+#define ILI9320_GAMMA6			ILI9320_REG(0x37)
+#define ILI9320_GAMMA7			ILI9320_REG(0x38)
+#define ILI9320_GAMMA8			ILI9320_REG(0x39)
+#define ILI9320_GAMMA9			ILI9320_REG(0x3C)
+#define ILI9320_GAMMA10			ILI9320_REG(0x3D)
+
+#define ILI9320_HORIZ_START		ILI9320_REG(0x50)
+#define ILI9320_HORIZ_END		ILI9320_REG(0x51)
+#define ILI9320_VERT_START		ILI9320_REG(0x52)
+#define ILI9320_VERT_END		ILI9320_REG(0x53)
+
+#define ILI9320_DRIVER2			ILI9320_REG(0x60)
+#define ILI9320_BASE_IMAGE		ILI9320_REG(0x61)
+#define ILI9320_VERT_SCROLL		ILI9320_REG(0x6a)
+
+#define ILI9320_PARTIAL1_POSITION	ILI9320_REG(0x80)
+#define ILI9320_PARTIAL1_START		ILI9320_REG(0x81)
+#define ILI9320_PARTIAL1_END		ILI9320_REG(0x82)
+#define ILI9320_PARTIAL2_POSITION	ILI9320_REG(0x83)
+#define ILI9320_PARTIAL2_START		ILI9320_REG(0x84)
+#define ILI9320_PARTIAL2_END		ILI9320_REG(0x85)
+
+#define ILI9320_INTERFACE1		ILI9320_REG(0x90)
+#define ILI9320_INTERFACE2		ILI9320_REG(0x92)
+#define ILI9320_INTERFACE3		ILI9320_REG(0x93)
+#define ILI9320_INTERFACE4		ILI9320_REG(0x95)
+#define ILI9320_INTERFACE5		ILI9320_REG(0x97)
+#define ILI9320_INTERFACE6		ILI9320_REG(0x98)
+
+/* Register contents definitions. */
+
+#define ILI9320_OSCILATION_OSC		(1 << 0)
+
+#define ILI9320_DRIVER_SS		(1 << 8)
+#define ILI9320_DRIVER_SM		(1 << 10)
+
+#define ILI9320_DRIVEWAVE_EOR		(1 << 8)
+#define ILI9320_DRIVEWAVE_BC		(1 << 9)
+#define ILI9320_DRIVEWAVE_MUSTSET	(1 << 10)
+
+#define ILI9320_ENTRYMODE_AM		(1 << 3)
+#define ILI9320_ENTRYMODE_ID(x)		((x) << 4)
+#define ILI9320_ENTRYMODE_ORG		(1 << 7)
+#define ILI9320_ENTRYMODE_HWM		(1 << 8)
+#define ILI9320_ENTRYMODE_BGR		(1 << 12)
+#define ILI9320_ENTRYMODE_DFM		(1 << 14)
+#define ILI9320_ENTRYMODE_TRI		(1 << 15)
+
+
+#define ILI9320_RESIZING_RSZ(x)		((x) << 0)
+#define ILI9320_RESIZING_RCH(x)		((x) << 4)
+#define ILI9320_RESIZING_RCV(x)		((x) << 8)
+
+
+#define ILI9320_DISPLAY1_D(x)		((x) << 0)
+#define ILI9320_DISPLAY1_CL		(1 << 3)
+#define ILI9320_DISPLAY1_DTE		(1 << 4)
+#define ILI9320_DISPLAY1_GON		(1 << 5)
+#define ILI9320_DISPLAY1_BASEE		(1 << 8)
+#define ILI9320_DISPLAY1_PTDE(x)	((x) << 12)
+
+
+#define ILI9320_DISPLAY2_BP(x)		((x) << 0)
+#define ILI9320_DISPLAY2_FP(x)		((x) << 8)
+
+
+#define ILI9320_RGBIF1_RIM_RGB18	(0 << 0)
+#define ILI9320_RGBIF1_RIM_RGB16	(1 << 0)
+#define ILI9320_RGBIF1_RIM_RGB6		(2 << 0)
+
+#define ILI9320_RGBIF1_CLK_INT		(0 << 4)
+#define ILI9320_RGBIF1_CLK_RGBIF	(1 << 4)
+#define ILI9320_RGBIF1_CLK_VSYNC	(2 << 4)
+
+#define ILI9320_RGBIF1_RM		(1 << 8)
+
+#define ILI9320_RGBIF1_ENC_FRAMES(x)	(((x) - 1)<< 13)
+
+#define ILI9320_RGBIF2_DPL		(1 << 0)
+#define ILI9320_RGBIF2_EPL		(1 << 1)
+#define ILI9320_RGBIF2_HSPL		(1 << 3)
+#define ILI9320_RGBIF2_VSPL		(1 << 4)
+
+
+#define ILI9320_POWER1_SLP		(1 << 1)
+#define ILI9320_POWER1_DSTB		(1 << 2)
+#define ILI9320_POWER1_AP(x)		((x) << 4)
+#define ILI9320_POWER1_APE		(1 << 7)
+#define ILI9320_POWER1_BT(x)		((x) << 8)
+#define ILI9320_POWER1_SAP		(1 << 12)
+
+
+#define ILI9320_POWER2_VC(x)		((x) << 0)
+#define ILI9320_POWER2_DC0(x)		((x) << 4)
+#define ILI9320_POWER2_DC1(x)		((x) << 8)
+
+
+#define ILI9320_POWER3_VRH(x)		((x) << 0)
+#define ILI9320_POWER3_PON		(1 << 4)
+#define ILI9320_POWER3_VCMR		(1 << 8)
+
+
+#define ILI9320_POWER4_VREOUT(x)	((x) << 8)
+
+
+#define ILI9320_DRIVER2_SCNL(x)		((x) << 0)
+#define ILI9320_DRIVER2_NL(x)		((x) << 8)
+#define ILI9320_DRIVER2_GS		(1 << 15)
+
+
+#define ILI9320_BASEIMAGE_REV		(1 << 0)
+#define ILI9320_BASEIMAGE_VLE		(1 << 1)
+#define ILI9320_BASEIMAGE_NDL		(1 << 2)
+
+
+#define ILI9320_INTERFACE4_RTNE(x)	(x)
+#define ILI9320_INTERFACE4_DIVE(x)	((x) << 8)
+
+/* SPI interface definitions */
+
+#define ILI9320_SPI_IDCODE		(0x70)
+#define ILI9320_SPI_ID(x)		((x) << 2)
+#define ILI9320_SPI_READ		(0x01)
+#define ILI9320_SPI_WRITE		(0x00)
+#define ILI9320_SPI_DATA		(0x02)
+#define ILI9320_SPI_INDEX		(0x00)
+
+/* platform data to pass configuration from lcd */
+
+enum ili9320_suspend {
+	ILI9320_SUSPEND_OFF,
+	ILI9320_SUSPEND_DEEP,
+};
+
+struct ili9320_platdata {
+	unsigned short	hsize;
+	unsigned short	vsize;
+
+	enum ili9320_suspend suspend;
+
+	/* set the reset line, 0 = reset asserted, 1 = normal */
+	void		(*reset)(unsigned int val);
+
+	unsigned short	entry_mode;
+	unsigned short	display2;
+	unsigned short	display3;
+	unsigned short	display4;
+	unsigned short	rgb_if1;
+	unsigned short	rgb_if2;
+	unsigned short	interface2;
+	unsigned short	interface3;
+	unsigned short	interface4;
+	unsigned short	interface5;
+	unsigned short	interface6;
+};
+
diff --git a/include/video/neomagic.h b/include/video/neomagic.h
index a9e118a1cd16..38910da0ae59 100644
--- a/include/video/neomagic.h
+++ b/include/video/neomagic.h
@@ -90,23 +90,6 @@
 #define PCI_CHIP_NM2360 0x0006
 #define PCI_CHIP_NM2380 0x0016
 
-
-struct xtimings {
-	unsigned int pixclock;
-	unsigned int HDisplay;
-	unsigned int HSyncStart;
-	unsigned int HSyncEnd;
-	unsigned int HTotal;
-	unsigned int VDisplay;
-	unsigned int VSyncStart;
-	unsigned int VSyncEnd;
-	unsigned int VTotal;
-	unsigned int sync;
-	int dblscan;
-	int interlaced;
-};
-
-
 /* --------------------------------------------------------------------- */
 
 typedef volatile struct {
diff --git a/include/video/platform_lcd.h b/include/video/platform_lcd.h
new file mode 100644
index 000000000000..ad3bdfe743b2
--- /dev/null
+++ b/include/video/platform_lcd.h
@@ -0,0 +1,21 @@
+/* include/video/platform_lcd.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platform-device LCD power control interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+struct plat_lcd_data;
+struct fb_info;
+
+struct plat_lcd_data {
+	void	(*set_power)(struct plat_lcd_data *, unsigned int power);
+	int	(*match_fb)(struct plat_lcd_data *, struct fb_info *);
+};
+
diff --git a/include/video/radeon.h b/include/video/radeon.h
index 83467e18f5e9..95a1f2038b1d 100644
--- a/include/video/radeon.h
+++ b/include/video/radeon.h
@@ -527,8 +527,9 @@
 
 
 /* DSTCACHE_CTLSTAT bit constants */
-#define RB2D_DC_FLUSH				   (3 << 0)
-#define RB2D_DC_FLUSH_ALL			   0xf
+#define RB2D_DC_FLUSH_2D			   (1 << 0)
+#define RB2D_DC_FREE_2D				   (1 << 2)
+#define RB2D_DC_FLUSH_ALL			   (RB2D_DC_FLUSH_2D | RB2D_DC_FREE_2D)
 #define RB2D_DC_BUSY				   (1 << 31)
 
 
diff --git a/include/video/trident.h b/include/video/trident.h
index 200be2551681..b6ce19d1b61b 100644
--- a/include/video/trident.h
+++ b/include/video/trident.h
@@ -4,9 +4,9 @@
 #endif
 
 #if TRIDENTFB_DEBUG
-#define debug(f,a...)	printk("%s:" f,  __FUNCTION__ , ## a);mdelay(1000);
+#define debug(f, a...)	printk("%s:" f,  __func__ , ## a);
 #else
-#define debug(f,a...)
+#define debug(f, a...)
 #endif
 
 #define output(f, a...) pr_info("tridentfb: " f, ## a)
@@ -24,7 +24,9 @@
 #define CYBER9397DVD	0x939A
 #define CYBER9520	0x9520
 #define CYBER9525DVD	0x9525
+#define TGUI9440	0x9440
 #define TGUI9660	0x9660
+#define PROVIDIA9685	0x9685
 #define IMAGE975	0x9750
 #define IMAGE985	0x9850
 #define BLADE3D		0x9880
@@ -39,36 +41,11 @@
 #define CYBERBLADEXPm8  0x9910
 #define CYBERBLADEXPm16 0x9930
 
-/* acceleration families */
-#define IMAGE	0
-#define BLADE	1
-#define XP	2
-
-#define is_image(id)	
-#define is_xp(id)	((id == CYBERBLADEXPAi1) ||\
-			 (id == CYBERBLADEXPm8) ||\
-			 (id == CYBERBLADEXPm16)) 
-
-#define is_blade(id)	((id == BLADE3D) ||\
-			 (id == CYBERBLADEE4) ||\
-			 (id == CYBERBLADEi7) ||\
-			 (id == CYBERBLADEi7D) ||\
-			 (id == CYBERBLADEi1) ||\
-			 (id == CYBERBLADEi1D) ||\
-			 (id ==	CYBERBLADEAi1) ||\
-			 (id ==	CYBERBLADEAi1D))
-
 /* these defines are for 'lcd' variable */
 #define LCD_STRETCH	0
 #define LCD_CENTER	1
 #define LCD_BIOS	2
 
-/* display types */
-#define DISPLAY_CRT	0
-#define DISPLAY_FP	1
-
-#define flatpanel (displaytype == DISPLAY_FP)
-
 /* General Registers */
 #define SPR	0x1F		/* Software Programming Register (videoram) */
 
@@ -88,33 +65,7 @@
 #define SKey 0x37
 #define SPKey 0x57
 
-/* 0x3x4 */
-#define CRTHTotal	0x00
-#define CRTHDispEnd	0x01
-#define CRTHBlankStart	0x02
-#define CRTHBlankEnd	0x03
-#define CRTHSyncStart	0x04
-#define CRTHSyncEnd	0x05
-
-#define CRTVTotal	0x06
-#define CRTVDispEnd	0x12
-#define CRTVBlankStart	0x15
-#define CRTVBlankEnd	0x16
-#define CRTVSyncStart	0x10
-#define CRTVSyncEnd	0x11
-
-#define CRTOverflow	0x07
-#define CRTPRowScan	0x08
-#define CRTMaxScanLine	0x09
-#define CRTModeControl	0x17
-#define CRTLineCompare	0x18
-
 /* 3x4 */
-#define StartAddrHigh 0x0C
-#define StartAddrLow 0x0D
-#define Offset 0x13
-#define Underline 0x14
-#define CRTCMode 0x17
 #define CRTCModuleTest 0x1E
 #define FIFOControl 0x20
 #define LinearAddReg 0x21
@@ -173,3 +124,23 @@
 #define BiosMode     0x5c
 #define BiosReg      0x5d
 
+/* Graphics Engine */
+#define STATUS	0x2120
+#define OLDCMD	0x2124
+#define DRAWFL	0x2128
+#define OLDCLR	0x212C
+#define OLDDST	0x2138
+#define OLDSRC	0x213C
+#define OLDDIM	0x2140
+#define CMD	0x2144
+#define ROP	0x2148
+#define COLOR	0x2160
+#define BGCOLOR	0x2164
+#define SRC1	0x2100
+#define SRC2	0x2104
+#define DST1	0x2108
+#define DST2	0x210C
+
+#define ROP_S	0xCC
+#define ROP_P	0xF0
+#define ROP_X	0x66
diff --git a/include/xen/events.h b/include/xen/events.h
index 67c4436554a9..4680ff3fbc91 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -44,4 +44,11 @@ extern void notify_remote_via_irq(int irq);
 
 extern void xen_irq_resume(void);
 
+/* Clear an irq's pending state, in preparation for polling on it */
+void xen_clear_irq_pending(int irq);
+
+/* Poll waiting for an irq to become pending.  In the usual case, the
+   irq will be disabled so it won't deliver an interrupt. */
+void xen_poll_irq(int irq);
+
 #endif	/* _XEN_EVENTS_H */
diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h
index 98b79bc404dd..c3adde32669b 100644
--- a/include/xen/hvc-console.h
+++ b/include/xen/hvc-console.h
@@ -5,11 +5,12 @@ extern struct console xenboot_console;
 
 #ifdef CONFIG_HVC_XEN
 void xen_console_resume(void);
+void xen_raw_console_write(const char *str);
+void xen_raw_printk(const char *fmt, ...);
 #else
 static inline void xen_console_resume(void) { }
+static inline void xen_raw_console_write(const char *str) { }
+static inline void xen_raw_printk(const char *fmt, ...) { }
 #endif
 
-void xen_raw_console_write(const char *str);
-void xen_raw_printk(const char *fmt, ...);
-
 #endif	/* XEN_HVC_CONSOLE_H */
diff --git a/include/xen/interface/callback.h b/include/xen/interface/callback.h
index 4aadcba31af9..2ae3cd243264 100644
--- a/include/xen/interface/callback.h
+++ b/include/xen/interface/callback.h
@@ -82,9 +82,9 @@
  */
 #define CALLBACKOP_register                0
 struct callback_register {
-    uint16_t type;
-    uint16_t flags;
-    struct xen_callback address;
+	uint16_t type;
+	uint16_t flags;
+	xen_callback_t address;
 };
 
 /*
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
index a706d6a78960..883a21bba24b 100644
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -11,4 +11,7 @@ void xen_post_suspend(int suspend_cancelled);
 void xen_mm_pin_all(void);
 void xen_mm_unpin_all(void);
 
+void xen_timer_resume(void);
+void xen_arch_resume(void);
+
 #endif /* INCLUDE_XEN_OPS_H */