diff options
Diffstat (limited to 'include/linux/slab.h')
| -rw-r--r-- | include/linux/slab.h | 265 |
1 files changed, 177 insertions, 88 deletions
diff --git a/include/linux/slab.h b/include/linux/slab.h index 6c5cc0ea8713..1e2f4fe12773 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -4,6 +4,8 @@ * (C) SGI 2006, Christoph Lameter * Cleaned up and restructured to ease the addition of alternative * implementations of SLAB allocators. + * (C) Linux Foundation 2008-2013 + * Unified interface for all slab allocators */ #ifndef _LINUX_SLAB_H @@ -51,7 +53,14 @@ * } * rcu_read_unlock(); * - * See also the comment on struct slab_rcu in mm/slab.c. + * This is useful if we need to approach a kernel structure obliquely, + * from its address obtained without the usual locking. We can lock + * the structure to stabilize it and check it's still at the given address, + * only if we can be sure that the memory has not been meanwhile reused + * for some other kind of object (which our subsystem's lock might corrupt). + * + * rcu_read_lock before reading the address, then rcu_read_unlock after + * taking the spinlock within the structure expected at that address. */ #define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */ #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ @@ -94,6 +103,7 @@ #define ZERO_OR_NULL_PTR(x) ((unsigned long)(x) <= \ (unsigned long)ZERO_SIZE_PTR) +#include <linux/kmemleak.h> struct mem_cgroup; /* @@ -289,6 +299,57 @@ static __always_inline int kmalloc_index(size_t size) } #endif /* !CONFIG_SLOB */ +void *__kmalloc(size_t size, gfp_t flags); +void *kmem_cache_alloc(struct kmem_cache *, gfp_t flags); + +#ifdef CONFIG_NUMA +void *__kmalloc_node(size_t size, gfp_t flags, int node); +void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); +#else +static __always_inline void *__kmalloc_node(size_t size, gfp_t flags, int node) +{ + return __kmalloc(size, flags); +} + +static __always_inline void *kmem_cache_alloc_node(struct kmem_cache *s, gfp_t flags, int node) +{ + return kmem_cache_alloc(s, flags); +} +#endif + +#ifdef CONFIG_TRACING +extern void *kmem_cache_alloc_trace(struct kmem_cache *, gfp_t, size_t); + +#ifdef CONFIG_NUMA +extern void *kmem_cache_alloc_node_trace(struct kmem_cache *s, + gfp_t gfpflags, + int node, size_t size); +#else +static __always_inline void * +kmem_cache_alloc_node_trace(struct kmem_cache *s, + gfp_t gfpflags, + int node, size_t size) +{ + return kmem_cache_alloc_trace(s, gfpflags, size); +} +#endif /* CONFIG_NUMA */ + +#else /* CONFIG_TRACING */ +static __always_inline void *kmem_cache_alloc_trace(struct kmem_cache *s, + gfp_t flags, size_t size) +{ + return kmem_cache_alloc(s, flags); +} + +static __always_inline void * +kmem_cache_alloc_node_trace(struct kmem_cache *s, + gfp_t gfpflags, + int node, size_t size) +{ + return kmem_cache_alloc_node(s, gfpflags, node); +} +#endif /* CONFIG_TRACING */ + #ifdef CONFIG_SLAB #include <linux/slab_def.h> #endif @@ -297,9 +358,105 @@ static __always_inline int kmalloc_index(size_t size) #include <linux/slub_def.h> #endif -#ifdef CONFIG_SLOB -#include <linux/slob_def.h> +static __always_inline void * +kmalloc_order(size_t size, gfp_t flags, unsigned int order) +{ + void *ret; + + flags |= (__GFP_COMP | __GFP_KMEMCG); + ret = (void *) __get_free_pages(flags, order); + kmemleak_alloc(ret, size, 1, flags); + return ret; +} + +#ifdef CONFIG_TRACING +extern void *kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order); +#else +static __always_inline void * +kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order) +{ + return kmalloc_order(size, flags, order); +} +#endif + +static __always_inline void *kmalloc_large(size_t size, gfp_t flags) +{ + unsigned int order = get_order(size); + return kmalloc_order_trace(size, flags, order); +} + +/** + * kmalloc - allocate memory + * @size: how many bytes of memory are required. + * @flags: the type of memory to allocate. + * + * kmalloc is the normal method of allocating memory + * for objects smaller than page size in the kernel. + * + * The @flags argument may be one of: + * + * %GFP_USER - Allocate memory on behalf of user. May sleep. + * + * %GFP_KERNEL - Allocate normal kernel ram. May sleep. + * + * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. + * For example, use this inside interrupt handlers. + * + * %GFP_HIGHUSER - Allocate pages from high memory. + * + * %GFP_NOIO - Do not do any I/O at all while trying to get memory. + * + * %GFP_NOFS - Do not make any fs calls while trying to get memory. + * + * %GFP_NOWAIT - Allocation will not sleep. + * + * %GFP_THISNODE - Allocate node-local memory only. + * + * %GFP_DMA - Allocation suitable for DMA. + * Should only be used for kmalloc() caches. Otherwise, use a + * slab created with SLAB_DMA. + * + * Also it is possible to set different flags by OR'ing + * in one or more of the following additional @flags: + * + * %__GFP_COLD - Request cache-cold pages instead of + * trying to return cache-warm pages. + * + * %__GFP_HIGH - This allocation has high priority and may use emergency pools. + * + * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail + * (think twice before using). + * + * %__GFP_NORETRY - If memory is not immediately available, + * then give up at once. + * + * %__GFP_NOWARN - If allocation fails, don't issue any warnings. + * + * %__GFP_REPEAT - If allocation fails initially, try once more before failing. + * + * There are other flags available as well, but these are not intended + * for general use, and so are not documented here. For a full list of + * potential flags, always refer to linux/gfp.h. + */ +static __always_inline void *kmalloc(size_t size, gfp_t flags) +{ + if (__builtin_constant_p(size)) { + if (size > KMALLOC_MAX_CACHE_SIZE) + return kmalloc_large(size, flags); +#ifndef CONFIG_SLOB + if (!(flags & GFP_DMA)) { + int index = kmalloc_index(size); + + if (!index) + return ZERO_SIZE_PTR; + + return kmem_cache_alloc_trace(kmalloc_caches[index], + flags, size); + } #endif + } + return __kmalloc(size, flags); +} /* * Determine size used for the nth kmalloc cache. @@ -321,6 +478,23 @@ static __always_inline int kmalloc_size(int n) return 0; } +static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) +{ +#ifndef CONFIG_SLOB + if (__builtin_constant_p(size) && + size <= KMALLOC_MAX_CACHE_SIZE && !(flags & GFP_DMA)) { + int i = kmalloc_index(size); + + if (!i) + return ZERO_SIZE_PTR; + + return kmem_cache_alloc_node_trace(kmalloc_caches[i], + flags, node, size); + } +#endif + return __kmalloc_node(size, flags, node); +} + /* * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment. * Intended for arches that get misalignment faults even for 64 bit integer @@ -373,61 +547,6 @@ int cache_show(struct kmem_cache *s, struct seq_file *m); void print_slabinfo_header(struct seq_file *m); /** - * kmalloc - allocate memory - * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate. - * - * The @flags argument may be one of: - * - * %GFP_USER - Allocate memory on behalf of user. May sleep. - * - * %GFP_KERNEL - Allocate normal kernel ram. May sleep. - * - * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. - * For example, use this inside interrupt handlers. - * - * %GFP_HIGHUSER - Allocate pages from high memory. - * - * %GFP_NOIO - Do not do any I/O at all while trying to get memory. - * - * %GFP_NOFS - Do not make any fs calls while trying to get memory. - * - * %GFP_NOWAIT - Allocation will not sleep. - * - * %GFP_THISNODE - Allocate node-local memory only. - * - * %GFP_DMA - Allocation suitable for DMA. - * Should only be used for kmalloc() caches. Otherwise, use a - * slab created with SLAB_DMA. - * - * Also it is possible to set different flags by OR'ing - * in one or more of the following additional @flags: - * - * %__GFP_COLD - Request cache-cold pages instead of - * trying to return cache-warm pages. - * - * %__GFP_HIGH - This allocation has high priority and may use emergency pools. - * - * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail - * (think twice before using). - * - * %__GFP_NORETRY - If memory is not immediately available, - * then give up at once. - * - * %__GFP_NOWARN - If allocation fails, don't issue any warnings. - * - * %__GFP_REPEAT - If allocation fails initially, try once more before failing. - * - * There are other flags available as well, but these are not intended - * for general use, and so are not documented here. For a full list of - * potential flags, always refer to linux/gfp.h. - * - * kmalloc is the normal method of allocating memory - * in the kernel. - */ -static __always_inline void *kmalloc(size_t size, gfp_t flags); - -/** * kmalloc_array - allocate memory for an array. * @n: number of elements. * @size: element size. @@ -451,36 +570,6 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags) return kmalloc_array(n, size, flags | __GFP_ZERO); } -#if !defined(CONFIG_NUMA) && !defined(CONFIG_SLOB) -/** - * kmalloc_node - allocate memory from a specific node - * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate (see kmalloc). - * @node: node to allocate from. - * - * kmalloc() for non-local nodes, used to allocate from a specific node - * if available. Equivalent to kmalloc() in the non-NUMA single-node - * case. - */ -static inline void *kmalloc_node(size_t size, gfp_t flags, int node) -{ - return kmalloc(size, flags); -} - -static inline void *__kmalloc_node(size_t size, gfp_t flags, int node) -{ - return __kmalloc(size, flags); -} - -void *kmem_cache_alloc(struct kmem_cache *, gfp_t); - -static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep, - gfp_t flags, int node) -{ - return kmem_cache_alloc(cachep, flags); -} -#endif /* !CONFIG_NUMA && !CONFIG_SLOB */ - /* * kmalloc_track_caller is a special version of kmalloc that records the * calling function of the routine calling it for slab leak tracking instead |