diff options
Diffstat (limited to 'drivers/tty/serial/omap-serial.c')
| -rw-r--r-- | drivers/tty/serial/omap-serial.c | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index fa511ebab67c..dd8b1a5458ff 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -342,7 +342,14 @@ static void serial_omap_stop_tx(struct uart_port *port) if ((up->rs485.flags & SER_RS485_ENABLED) && !(up->rs485.flags & SER_RS485_RX_DURING_TX)) { - up->ier = UART_IER_RLSI | UART_IER_RDI; + /* + * Empty the RX FIFO, we are not interested in anything + * received during the half-duplex transmission. + */ + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR); + /* Re-enable RX interrupts */ + up->ier |= UART_IER_RLSI | UART_IER_RDI; + up->port.read_status_mask |= UART_LSR_DR; serial_out(up, UART_IER, up->ier); } @@ -355,7 +362,7 @@ static void serial_omap_stop_rx(struct uart_port *port) struct uart_omap_port *up = to_uart_omap_port(port); pm_runtime_get_sync(up->dev); - up->ier &= ~UART_IER_RLSI; + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); pm_runtime_mark_last_busy(up->dev); @@ -738,9 +745,6 @@ static int serial_omap_startup(struct uart_port *port) return retval; } disable_irq(up->wakeirq); - } else { - dev_info(up->port.dev, "no wakeirq for uart%d\n", - up->port.line); } dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); @@ -1604,8 +1608,11 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, flags & SER_RS485_RTS_AFTER_SEND); if (ret < 0) return ret; - } else + } else if (up->rts_gpio == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else { up->rts_gpio = -EINVAL; + } if (of_property_read_u32_array(np, "rs485-rts-delay", rs485_delay, 2) == 0) { @@ -1687,6 +1694,9 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.iotype = UPIO_MEM; up->port.irq = uartirq; up->wakeirq = wakeirq; + if (!up->wakeirq) + dev_info(up->port.dev, "no wakeirq for uart%d\n", + up->port.line); up->port.regshift = 2; up->port.fifosize = 64; |