diff options
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/8250.c | 9 | ||||
-rw-r--r-- | drivers/serial/8250_pci.c | 86 | ||||
-rw-r--r-- | drivers/serial/Kconfig | 2 | ||||
-rw-r--r-- | drivers/serial/atmel_serial.c | 2 | ||||
-rw-r--r-- | drivers/serial/bcm63xx_uart.c | 4 | ||||
-rw-r--r-- | drivers/serial/icom.c | 54 | ||||
-rw-r--r-- | drivers/serial/mpc52xx_uart.c | 2 | ||||
-rw-r--r-- | drivers/serial/of_serial.c | 1 | ||||
-rw-r--r-- | drivers/serial/sa1100.c | 2 | ||||
-rw-r--r-- | drivers/serial/serial_core.c | 7 | ||||
-rw-r--r-- | drivers/serial/serial_cs.c | 20 | ||||
-rw-r--r-- | drivers/serial/serial_txx9.c | 39 | ||||
-rw-r--r-- | drivers/serial/sh-sci.c | 2 | ||||
-rw-r--r-- | drivers/serial/suncore.c | 37 | ||||
-rw-r--r-- | drivers/serial/suncore.h | 5 | ||||
-rw-r--r-- | drivers/serial/sunhv.c | 2 | ||||
-rw-r--r-- | drivers/serial/sunsab.c | 9 | ||||
-rw-r--r-- | drivers/serial/sunsu.c | 36 | ||||
-rw-r--r-- | drivers/serial/sunzilog.c | 8 |
19 files changed, 225 insertions, 102 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 2209620d2349..737b4c960971 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -64,6 +64,8 @@ static int serial_index(struct uart_port *port) return (serial8250_reg.minor - 64) + port->line; } +static unsigned int skip_txen_test; /* force skip of txen test at init time */ + /* * Debugging. */ @@ -1087,7 +1089,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) if (!up->port.iobase && !up->port.mapbase && !up->port.membase) return; - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", serial_index(&up->port), up->port.iobase, up->port.membase); /* @@ -2108,7 +2110,7 @@ static int serial8250_startup(struct uart_port *port) is variable. So, let's just don't test if we receive TX irq. This way, we'll never enable UART_BUG_TXEN. */ - if (up->port.flags & UPF_NO_TXEN_TEST) + if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) goto dont_test_tx_en; /* @@ -3248,6 +3250,9 @@ MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" module_param(nr_uarts, uint, 0644); MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + #ifdef CONFIG_SERIAL_8250_RSA module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index e7108e75653d..b28af13c45a1 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1561,11 +1561,16 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_exar_ibm_saturn, pbn_pasemi_1682M, pbn_ni8430_2, pbn_ni8430_4, pbn_ni8430_8, pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, }; /* @@ -2146,6 +2151,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 0x200, }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + /* * PA Semi PWRficient PA6T-1682M on-chip UART */ @@ -2185,6 +2197,37 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 0x10, .first_offset = 0x800, }, + /* + * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -2340,7 +2383,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) break; #ifdef SERIAL_DEBUG_PCI - printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n", + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); #endif @@ -2649,6 +2692,9 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -3093,6 +3139,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, @@ -3556,6 +3608,38 @@ static struct pci_device_id serial_pci_tbl[] = { 0, pbn_b0_8_115200 }, + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e70712044a7e..e52257257279 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -862,7 +862,7 @@ config SERIAL_IMX_CONSOLE config SERIAL_UARTLITE tristate "Xilinx uartlite serial port support" - depends on PPC32 || MICROBLAZE + depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE select SERIAL_CORE help Say Y here if you want to use the Xilinx uartlite serial controller. diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3551c5cb7094..9d948bccafaf 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1531,7 +1531,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) void *data; int ret; - BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE)); + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); port = &atmel_ports[pdev->id]; port->backup_imr = 0; diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c index beddaa6e9069..37ad0c449937 100644 --- a/drivers/serial/bcm63xx_uart.c +++ b/drivers/serial/bcm63xx_uart.c @@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port) * higher than fifo size anyway since we're much faster than * serial port */ max_count = 32; - tty = port->info->port.tty; + tty = port->state->port.tty; do { unsigned int iestat, c, cstat; char flag; @@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port) return; } - xmit = &port->info->xmit; + xmit = &port->state->xmit; if (uart_circ_empty(xmit)) goto txq_empty; diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 2d7feecaf492..0028b6f89ce6 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -307,7 +307,7 @@ static void stop_processor(struct icom_port *icom_port) if (port < 4) { temp = readl(stop_proc[port].global_control_reg); temp = - (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; writel(temp, stop_proc[port].global_control_reg); /* write flush */ @@ -336,7 +336,7 @@ static void start_processor(struct icom_port *icom_port) if (port < 4) { temp = readl(start_proc[port].global_control_reg); temp = - (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; writel(temp, start_proc[port].global_control_reg); /* write flush */ @@ -509,8 +509,8 @@ static void load_code(struct icom_port *icom_port) dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); } - if (new_page != NULL) - pci_free_consistent(dev, 4096, new_page, temp_pci); + if (new_page != NULL) + pci_free_consistent(dev, 4096, new_page, temp_pci); } static int startup(struct icom_port *icom_port) @@ -1493,15 +1493,15 @@ static int __devinit icom_probe(struct pci_dev *dev, const struct pci_device_id *ent) { int index; - unsigned int command_reg; - int retval; - struct icom_adapter *icom_adapter; - struct icom_port *icom_port; + unsigned int command_reg; + int retval; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; - retval = pci_enable_device(dev); - if (retval) { + retval = pci_enable_device(dev); + if (retval) { dev_err(&dev->dev, "Device enable FAILED\n"); - return retval; + return retval; } if ( (retval = pci_request_regions(dev, "icom"))) { @@ -1510,23 +1510,23 @@ static int __devinit icom_probe(struct pci_dev *dev, return retval; } - pci_set_master(dev); + pci_set_master(dev); - if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { + if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { dev_err(&dev->dev, "PCI Config read FAILED\n"); - return retval; - } + return retval; + } pci_write_config_dword(dev, PCI_COMMAND, command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - if (ent->driver_data == ADAPTER_V1) { + if (ent->driver_data == ADAPTER_V1) { pci_write_config_dword(dev, 0x44, 0x8300830A); - } else { + } else { pci_write_config_dword(dev, 0x44, 0x42004200); pci_write_config_dword(dev, 0x48, 0x42004200); - } + } retval = icom_alloc_adapter(&icom_adapter); @@ -1536,10 +1536,10 @@ static int __devinit icom_probe(struct pci_dev *dev, goto probe_exit0; } - icom_adapter->base_addr_pci = pci_resource_start(dev, 0); - icom_adapter->pci_dev = dev; - icom_adapter->version = ent->driver_data; - icom_adapter->subsystem_id = ent->subdevice; + icom_adapter->base_addr_pci = pci_resource_start(dev, 0); + icom_adapter->pci_dev = dev; + icom_adapter->version = ent->driver_data; + icom_adapter->subsystem_id = ent->subdevice; retval = icom_init_ports(icom_adapter); @@ -1548,7 +1548,7 @@ static int __devinit icom_probe(struct pci_dev *dev, goto probe_exit1; } - icom_adapter->base_addr = pci_ioremap_bar(dev, 0); + icom_adapter->base_addr = pci_ioremap_bar(dev, 0); if (!icom_adapter->base_addr) goto probe_exit1; @@ -1562,7 +1562,7 @@ static int __devinit icom_probe(struct pci_dev *dev, retval = icom_load_ports(icom_adapter); - for (index = 0; index < icom_adapter->numb_ports; index++) { + for (index = 0; index < icom_adapter->numb_ports; index++) { icom_port = &icom_adapter->port_info[index]; if (icom_port->status == ICOM_PORT_ACTIVE) { @@ -1579,7 +1579,7 @@ static int __devinit icom_probe(struct pci_dev *dev, icom_port->status = ICOM_PORT_OFF; dev_err(&dev->dev, "Device add failed\n"); } else - dev_info(&dev->dev, "Device added\n"); + dev_info(&dev->dev, "Device added\n"); } } @@ -1595,9 +1595,7 @@ probe_exit0: pci_release_regions(dev); pci_disable_device(dev); - return retval; - - + return retval; } static void __devexit icom_remove(struct pci_dev *dev) diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index d7bcd074d383..7ce9e9f567a3 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -705,7 +705,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) return -EINVAL; if ((ser->irq != port->irq) || - (ser->io_type != SERIAL_IO_MEM) || + (ser->io_type != UPIO_MEM) || (ser->baud_base != port->uartclk) || (ser->iomem_base != (void *)port->mapbase) || (ser->hub6 != 0)) diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index 02406ba6da1c..cdf172eda2e3 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev) static struct of_device_id __devinitdata of_platform_serial_table[] = { { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 7f5e26873220..2199d819a987 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -638,7 +638,7 @@ static void __init sa1100_init_ports(void) PPSR |= PPC_TXD1 | PPC_TXD3; } -void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns) +void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns) { if (fns->get_mctrl) sa1100_pops.get_mctrl = fns->get_mctrl; diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 1689bda1d13b..dcc72444e8e7 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1270,6 +1270,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) BUG_ON(!kernel_locked()); + if (!state) + return; + uport = state->uart_port; port = &state->port; @@ -1316,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) */ if (port->flags & ASYNC_INITIALIZED) { unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&uport->lock, flags); uport->ops->stop_rx(uport); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&uport->lock, flags); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index a3bb49031a7f..7c7914f5fa02 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -873,20 +873,20 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"), - PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), + PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 0f7cf4c453e6..c50e9fbbf743 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -221,21 +221,26 @@ sio_quot_set(struct uart_txx9_port *up, int quot) sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); } +static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) +{ + return container_of(port, struct uart_txx9_port, port); +} + static void serial_txx9_stop_tx(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); } static void serial_txx9_start_tx(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); } static void serial_txx9_stop_rx(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; } @@ -246,7 +251,7 @@ static void serial_txx9_enable_ms(struct uart_port *port) static void serial_txx9_initialize(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int tmout = 10000; sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); @@ -414,7 +419,7 @@ static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) static unsigned int serial_txx9_tx_empty(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; unsigned int ret; @@ -427,7 +432,7 @@ static unsigned int serial_txx9_tx_empty(struct uart_port *port) static unsigned int serial_txx9_get_mctrl(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int ret; /* no modem control lines */ @@ -440,7 +445,7 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port) static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); if (mctrl & TIOCM_RTS) sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); @@ -450,7 +455,7 @@ static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) static void serial_txx9_break_ctl(struct uart_port *port, int break_state) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; spin_lock_irqsave(&up->port.lock, flags); @@ -494,7 +499,7 @@ static int serial_txx9_get_poll_char(struct uart_port *port) { unsigned int ier; unsigned char c; - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); /* * First save the IER then disable the interrupts @@ -520,7 +525,7 @@ static int serial_txx9_get_poll_char(struct uart_port *port) static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) { unsigned int ier; - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); /* * First save the IER then disable the interrupts @@ -551,7 +556,7 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) static int serial_txx9_startup(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; int retval; @@ -596,7 +601,7 @@ static int serial_txx9_startup(struct uart_port *port) static void serial_txx9_shutdown(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned long flags; /* @@ -636,7 +641,7 @@ static void serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); unsigned int cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -814,19 +819,19 @@ static void serial_txx9_release_resource(struct uart_txx9_port *up) static void serial_txx9_release_port(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); serial_txx9_release_resource(up); } static int serial_txx9_request_port(struct uart_port *port) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); return serial_txx9_request_resource(up); } static void serial_txx9_config_port(struct uart_port *port, int uflags) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); int ret; /* @@ -897,7 +902,7 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv, static void serial_txx9_console_putchar(struct uart_port *port, int ch) { - struct uart_txx9_port *up = (struct uart_txx9_port *)port; + struct uart_txx9_port *up = to_uart_txx9_port(port); wait_for_xmitr(up); sio_out(up, TXX9_SITFIFO, ch); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 85119fb7cb50..6498bd1fb6dd 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1143,7 +1143,7 @@ static void serial_console_write(struct console *co, const char *s, while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); - if (sci_port->disable); + if (sci_port->disable) sci_port->disable(port); } diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index a2d4a19550ab..ed7d958b0a01 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -53,20 +53,21 @@ void sunserial_unregister_minors(struct uart_driver *drv, int count) EXPORT_SYMBOL(sunserial_unregister_minors); int sunserial_console_match(struct console *con, struct device_node *dp, - struct uart_driver *drv, int line) + struct uart_driver *drv, int line, bool ignore_line) { - int off; - if (!con || of_console_device != dp) return 0; - off = 0; - if (of_console_options && - *of_console_options == 'b') - off = 1; + if (!ignore_line) { + int off = 0; - if ((line & 1) != off) - return 0; + if (of_console_options && + *of_console_options == 'b') + off = 1; + + if ((line & 1) != off) + return 0; + } con->index = line; drv->cons = con; @@ -76,23 +77,24 @@ int sunserial_console_match(struct console *con, struct device_node *dp, } EXPORT_SYMBOL(sunserial_console_match); -void -sunserial_console_termios(struct console *con) +void sunserial_console_termios(struct console *con, struct device_node *uart_dp) { - struct device_node *dp; - const char *od, *mode, *s; + const char *mode, *s; char mode_prop[] = "ttyX-mode"; int baud, bits, stop, cflag; char parity; - dp = of_find_node_by_path("/options"); - od = of_get_property(dp, "output-device", NULL); - if (!strcmp(od, "rsc")) { - mode = of_get_property(of_console_device, + if (!strcmp(uart_dp->name, "rsc") || + !strcmp(uart_dp->name, "rsc-console") || + !strcmp(uart_dp->name, "rsc-control")) { + mode = of_get_property(uart_dp, "ssp-console-modes", NULL); if (!mode) mode = "115200,8,n,1,-"; + } else if (!strcmp(uart_dp->name, "lom-console")) { + mode = "9600,8,n,1,-"; } else { + struct device_node *dp; char c; c = 'a'; @@ -101,6 +103,7 @@ sunserial_console_termios(struct console *con) mode_prop[3] = c; + dp = of_find_node_by_path("/options"); mode = of_get_property(dp, mode_prop, NULL); if (!mode) mode = "9600,8,n,1,-"; diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h index 042668aa602e..db2057936c31 100644 --- a/drivers/serial/suncore.h +++ b/drivers/serial/suncore.h @@ -26,7 +26,8 @@ extern int sunserial_register_minors(struct uart_driver *, int); extern void sunserial_unregister_minors(struct uart_driver *, int); extern int sunserial_console_match(struct console *, struct device_node *, - struct uart_driver *, int); -extern void sunserial_console_termios(struct console *); + struct uart_driver *, int, bool); +extern void sunserial_console_termios(struct console *, + struct device_node *); #endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index d548652dee50..d14cca7fb88d 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -566,7 +566,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m goto out_free_con_read_page; sunserial_console_match(&sunhv_console, op->node, - &sunhv_reg, port->line); + &sunhv_reg, port->line, false); err = uart_add_one_port(&sunhv_reg, port); if (err) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index d1ad34128635..d514e28d0755 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options) printk("Console: ttyS%d (SAB82532)\n", (sunsab_reg.minor - 64) + con->index); - sunserial_console_termios(con); + sunserial_console_termios(con, to_of_device(up->port.dev)->node); switch (con->cflag & CBAUD) { case B150: baud = 150; break; @@ -1027,10 +1027,12 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id * goto out1; sunserial_console_match(SUNSAB_CONSOLE(), op->node, - &sunsab_reg, up[0].port.line); + &sunsab_reg, up[0].port.line, + false); sunserial_console_match(SUNSAB_CONSOLE(), op->node, - &sunsab_reg, up[1].port.line); + &sunsab_reg, up[1].port.line, + false); err = uart_add_one_port(&sunsab_reg, &up[0].port); if (err) @@ -1116,7 +1118,6 @@ static int __init sunsab_init(void) if (!sunsab_ports) return -ENOMEM; - sunsab_reg.cons = SUNSAB_CONSOLE(); err = sunserial_register_minors(&sunsab_reg, num_channels); if (err) { kfree(sunsab_ports); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 68d262b15749..170d3d68c8f0 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1329,11 +1329,9 @@ static void sunsu_console_write(struct console *co, const char *s, */ static int __init sunsu_console_setup(struct console *co, char *options) { + static struct ktermios dummy; + struct ktermios termios; struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; printk("Console: ttyS%d (SU)\n", (sunsu_reg.minor - 64) + co->index); @@ -1352,10 +1350,15 @@ static int __init sunsu_console_setup(struct console *co, char *options) */ spin_lock_init(&port->lock); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); + /* Get firmware console settings. */ + sunserial_console_termios(co, to_of_device(port->dev)->node); - return uart_set_options(port, co, baud, parity, bits, flow); + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = co->cflag; + port->mctrl |= TIOCM_DTR; + port->ops->set_termios(port, &termios, &dummy); + + return 0; } static struct console sunsu_console = { @@ -1409,6 +1412,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m struct uart_sunsu_port *up; struct resource *rp; enum su_type type; + bool ignore_line; int err; type = su_get_type(dp); @@ -1467,8 +1471,14 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m up->port.ops = &sunsu_pops; + ignore_line = false; + if (!strcmp(dp->name, "rsc-console") || + !strcmp(dp->name, "lom-console")) + ignore_line = true; + sunserial_console_match(SUNSU_CONSOLE(), dp, - &sunsu_reg, up->port.line); + &sunsu_reg, up->port.line, + ignore_line); err = uart_add_one_port(&sunsu_reg, &up->port); if (err) goto out_unmap; @@ -1517,6 +1527,10 @@ static const struct of_device_id su_match[] = { .name = "serial", .compatible = "su", }, + { + .type = "serial", + .compatible = "su", + }, {}, }; MODULE_DEVICE_TABLE(of, su_match); @@ -1548,6 +1562,12 @@ static int __init sunsu_init(void) num_uart++; } } + for_each_node_by_type(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } if (num_uart) { err = sunserial_register_minors(&sunsu_reg, num_uart); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index ef693ae22e7f..2c7a66af4f52 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1180,7 +1180,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options) (sunzilog_reg.minor - 64) + con->index, con->index); /* Get firmware console settings. */ - sunserial_console_termios(con); + sunserial_console_termios(con, to_of_device(up->port.dev)->node); /* Firmware console speed is limited to 150-->38400 baud so * this hackish cflag thing is OK. @@ -1416,7 +1416,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m if (!keyboard_mouse) { if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, - &sunzilog_reg, up[0].port.line)) + &sunzilog_reg, up[0].port.line, + false)) up->flags |= SUNZILOG_FLAG_IS_CONS; err = uart_add_one_port(&sunzilog_reg, &up[0].port); if (err) { @@ -1425,7 +1426,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m return err; } if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, - &sunzilog_reg, up[1].port.line)) + &sunzilog_reg, up[1].port.line, + false)) up->flags |= SUNZILOG_FLAG_IS_CONS; err = uart_add_one_port(&sunzilog_reg, &up[1].port); if (err) { |