summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250_pci.c12
-rw-r--r--drivers/serial/icom.c3
-rw-r--r--drivers/serial/jsm/jsm_tty.c4
-rw-r--r--drivers/serial/serial_txx9.c113
4 files changed, 103 insertions, 29 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index e371a9c15341..6160e03f410c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -398,8 +398,7 @@ static int sbs_init(struct pci_dev *dev)
{
u8 __iomem *p;
- p = ioremap_nocache(pci_resource_start(dev, 0),
- pci_resource_len(dev, 0));
+ p = pci_ioremap_bar(dev, 0);
if (p == NULL)
return -ENOMEM;
@@ -423,8 +422,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
{
u8 __iomem *p;
- p = ioremap_nocache(pci_resource_start(dev, 0),
- pci_resource_len(dev, 0));
+ p = pci_ioremap_bar(dev, 0);
/* FIXME: What if resource_len < OCT_REG_CR_OFF */
if (p != NULL)
writeb(0, p + OCT_REG_CR_OFF);
@@ -761,6 +759,8 @@ static int pci_netmos_init(struct pci_dev *dev)
/* subdevice 0x00PS means <P> parallel, <S> serial */
unsigned int num_serial = dev->subsystem_device & 0xf;
+ if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+ return 0;
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return 0;
@@ -3559,6 +3559,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+ 0xA000, 0x1000,
+ 0, 0, pbn_b0_1_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 9f2891c2c4a2..cd1b6a45bb82 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1548,8 +1548,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
goto probe_exit1;
}
- icom_adapter->base_addr = ioremap(icom_adapter->base_addr_pci,
- pci_resource_len(dev, 0));
+ icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
if (!icom_adapter->base_addr)
goto probe_exit1;
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 107ce2e187b8..00f4577d2f7f 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -467,7 +467,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
printk(KERN_INFO "jsm: linemap is full, added device failed\n");
continue;
} else
- set_bit((int)line, linemap);
+ set_bit(line, linemap);
brd->channels[i]->uart_port.line = line;
if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
printk(KERN_INFO "jsm: add device failed\n");
@@ -503,7 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
ch = brd->channels[i];
- clear_bit((int)(ch->uart_port.line), linemap);
+ clear_bit(ch->uart_port.line, linemap);
uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
}
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 7313c2edcb83..54dd16d66a4b 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -461,6 +461,94 @@ static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&up->port.lock, flags);
}
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct uart_txx9_port *up)
+{
+ unsigned int tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ while (--tmout &&
+ !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
+ udelay(1);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
+ udelay(1);
+ }
+}
+#endif
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_txx9_get_poll_char(struct uart_port *port)
+{
+ unsigned int ier;
+ unsigned char c;
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = sio_in(up, TXX9_SIDICR);
+ sio_out(up, TXX9_SIDICR, 0);
+
+ while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID)
+ ;
+
+ c = sio_in(up, TXX9_SIRFIFO);
+
+ /*
+ * Finally, clear RX interrupt status
+ * and restore the IER
+ */
+ sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS);
+ sio_out(up, TXX9_SIDICR, ier);
+ return c;
+}
+
+
+static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
+{
+ unsigned int ier;
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = sio_in(up, TXX9_SIDICR);
+ sio_out(up, TXX9_SIDICR, 0);
+
+ wait_for_xmitr(up);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ sio_out(up, TXX9_SITFIFO, c);
+ if (c == 10) {
+ wait_for_xmitr(up);
+ sio_out(up, TXX9_SITFIFO, 13);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ sio_out(up, TXX9_SIDICR, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static int serial_txx9_startup(struct uart_port *port)
{
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
@@ -781,6 +869,10 @@ static struct uart_ops serial_txx9_pops = {
.release_port = serial_txx9_release_port,
.request_port = serial_txx9_request_port,
.config_port = serial_txx9_config_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial_txx9_get_poll_char,
+ .poll_put_char = serial_txx9_put_poll_char,
+#endif
};
static struct uart_txx9_port serial_txx9_ports[UART_NR];
@@ -803,27 +895,6 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv,
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-/*
- * Wait for transmitter & holding register to empty
- */
-static inline void wait_for_xmitr(struct uart_txx9_port *up)
-{
- unsigned int tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- while (--tmout &&
- !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
- udelay(1);
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- tmout = 1000000;
- while (--tmout &&
- (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
- udelay(1);
- }
-}
-
static void serial_txx9_console_putchar(struct uart_port *port, int ch)
{
struct uart_txx9_port *up = (struct uart_txx9_port *)port;
generated by cgit v1.2.3 (git 2.0.4) at 2025-06-05 12:45:16 +0000