diff options
Diffstat (limited to 'drivers/power')
-rw-r--r-- | drivers/power/reset/Kconfig | 2 | ||||
-rw-r--r-- | drivers/power/reset/qnap-poweroff.c | 49 | ||||
-rw-r--r-- | drivers/power/reset/vexpress-poweroff.c | 19 |
3 files changed, 48 insertions, 22 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 6d452a78b19c..fa0e4e057b99 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -22,7 +22,7 @@ config POWER_RESET_GPIO config POWER_RESET_MSM bool "Qualcomm MSM power-off driver" - depends on POWER_RESET && ARCH_MSM + depends on POWER_RESET && ARCH_QCOM help Power off and restart support for Qualcomm boards. diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c index 37f56f7ee926..a75db7f8a92f 100644 --- a/drivers/power/reset/qnap-poweroff.c +++ b/drivers/power/reset/qnap-poweroff.c @@ -1,5 +1,5 @@ /* - * QNAP Turbo NAS Board power off + * QNAP Turbo NAS Board power off. Can also be used on Synology devices. * * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch> * @@ -25,17 +25,43 @@ #define UART1_REG(x) (base + ((UART_##x) << 2)) +struct power_off_cfg { + u32 baud; + char cmd; +}; + +static const struct power_off_cfg qnap_power_off_cfg = { + .baud = 19200, + .cmd = 'A', +}; + +static const struct power_off_cfg synology_power_off_cfg = { + .baud = 9600, + .cmd = '1', +}; + +static const struct of_device_id qnap_power_off_of_match_table[] = { + { .compatible = "qnap,power-off", + .data = &qnap_power_off_cfg, + }, + { .compatible = "synology,power-off", + .data = &synology_power_off_cfg, + }, + {} +}; +MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); + static void __iomem *base; static unsigned long tclk; +static const struct power_off_cfg *cfg; static void qnap_power_off(void) { - /* 19200 baud divisor */ - const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200)); + const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud)); pr_err("%s: triggering power-off...\n", __func__); - /* hijack UART1 and reset into sane state (19200,8n1) */ + /* hijack UART1 and reset into sane state */ writel(0x83, UART1_REG(LCR)); writel(divisor & 0xff, UART1_REG(DLL)); writel((divisor >> 8) & 0xff, UART1_REG(DLM)); @@ -44,16 +70,21 @@ static void qnap_power_off(void) writel(0x00, UART1_REG(FCR)); writel(0x00, UART1_REG(MCR)); - /* send the power-off command 'A' to PIC */ - writel('A', UART1_REG(TX)); + /* send the power-off command to PIC */ + writel(cfg->cmd, UART1_REG(TX)); } static int qnap_power_off_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct resource *res; struct clk *clk; char symname[KSYM_NAME_LEN]; + const struct of_device_id *match = + of_match_node(qnap_power_off_of_match_table, np); + cfg = match->data; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "Missing resource"); @@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id qnap_power_off_of_match_table[] = { - { .compatible = "qnap,power-off", }, - {} -}; -MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); - static struct platform_driver qnap_power_off_driver = { .probe = qnap_power_off_probe, .remove = qnap_power_off_remove, diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c index 476aa495c110..b95cf71ed695 100644 --- a/drivers/power/reset/vexpress-poweroff.c +++ b/drivers/power/reset/vexpress-poweroff.c @@ -11,7 +11,7 @@ * Copyright (C) 2012 ARM Limited */ -#include <linux/jiffies.h> +#include <linux/delay.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -23,17 +23,12 @@ static void vexpress_reset_do(struct device *dev, const char *what) { int err = -ENOENT; - struct vexpress_config_func *func = - vexpress_config_func_get_by_dev(dev); + struct vexpress_config_func *func = dev_get_drvdata(dev); if (func) { - unsigned long timeout; - err = vexpress_config_write(func, 0, 0); - - timeout = jiffies + HZ; - while (time_before(jiffies, timeout)) - cpu_relax(); + if (!err) + mdelay(1000); } dev_emerg(dev, "Unable to %s (%d)\n", what, err); @@ -96,12 +91,18 @@ static int vexpress_reset_probe(struct platform_device *pdev) enum vexpress_reset_func func; const struct of_device_id *match = of_match_device(vexpress_reset_of_match, &pdev->dev); + struct vexpress_config_func *config_func; if (match) func = (enum vexpress_reset_func)match->data; else func = pdev->id_entry->driver_data; + config_func = vexpress_config_func_get_by_dev(&pdev->dev); + if (!config_func) + return -EINVAL; + dev_set_drvdata(&pdev->dev, config_func); + switch (func) { case FUNC_SHUTDOWN: vexpress_power_off_device = &pdev->dev; |