diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 50 |
1 files changed, 20 insertions, 30 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d6aef70d34fa..f44e49014a44 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Freescale eSDHC i.MX controller driver for the platform bus. * @@ -5,10 +6,6 @@ * * Copyright (c) 2010 Pengutronix e.K. * Author: Wolfram Sang <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. */ #include <linux/io.h> @@ -312,6 +309,15 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) if (imx_data->socdata->flags & ESDHC_FLAG_HS400) val |= SDHCI_SUPPORT_HS400; + + /* + * Do not advertise faster UHS modes if there are no + * pinctrl states for 100MHz/200MHz. + */ + if (IS_ERR_OR_NULL(imx_data->pins_100mhz) || + IS_ERR_OR_NULL(imx_data->pins_200mhz)) + val &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50 + | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_HS400); } } @@ -699,14 +705,14 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, int div = 1; u32 temp, val; + if (esdhc_is_usdhc(imx_data)) { + val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); + } + if (clock == 0) { host->mmc->actual_clock = 0; - - if (esdhc_is_usdhc(imx_data)) { - val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); - writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, - host->ioaddr + ESDHC_VENDOR_SPEC); - } return; } @@ -752,7 +758,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, if (esdhc_is_usdhc(imx_data)) { val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, - host->ioaddr + ESDHC_VENDOR_SPEC); + host->ioaddr + ESDHC_VENDOR_SPEC); } mdelay(1); @@ -1142,34 +1148,18 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, &boarddata->tuning_start_tap); if (of_find_property(np, "no-1-8-v", NULL)) - boarddata->support_vsel = false; - else - boarddata->support_vsel = true; + host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line)) boarddata->delay_line = 0; mmc_of_parse_voltage(np, &host->ocr_mask); - /* sdr50 and sdr104 need work on 1.8v signal voltage */ - if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && - !IS_ERR(imx_data->pins_default)) { + if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_100MHZ); imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_200MHZ); - if (IS_ERR(imx_data->pins_100mhz) || - IS_ERR(imx_data->pins_200mhz)) { - dev_warn(mmc_dev(host->mmc), - "could not get ultra high speed state, work on normal mode\n"); - /* - * fall back to not supporting uhs by specifying no - * 1.8v quirk - */ - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; - } - } else { - host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; } /* call to generic mmc_of_parse to support additional capabilities */ @@ -1321,7 +1311,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (esdhc_is_usdhc(imx_data)) { host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; - host->mmc->caps |= MMC_CAP_1_8V_DDR; + host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200)) host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; |